2662 files changed, 0 insertions, 589239 deletions

diff --git a/newlib/ChangeLog b/newlib/ChangeLog
deleted file mode 100644
index 1997b083b..000000000
--- a/newlib/ChangeLog
+++ /dev/null
@@ -1,13197 +0,0 @@
-2003-11-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h (_atoi_r): New prototype.
-	* libc/stdlib/atoi.c (_atoi_r): New reentrant function.
-
-2003-11-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h (_atoll_r, _atol_r): New prototypes.
-	* libc/stdlib/atol.c (_atol_r): New reentrant function.
-	* libc/stdlib/atoll.c (_atoll_r): Ditto.
-
-2003-11-27  Artem B. Bityuckiy  <mail_lists@mail.ru>
-	    Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h (lldiv_t): New type.
-	(atoll, llabs, lldiv): New prototypes.
-	* libc/stdlib/Makefile.am: Add support for atoll, llabs, and lldiv.
-	* libc/stdlib/stdlib.tex: Ditto.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/stdlib/atoll.c: New file.
-	* libc/stdlib/llabs.c: Ditto.
-	* libc/stdlib/lldiv.c: Ditto.
-
-2003-11-26  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/fcntl.h: Declare syscalls only when building newlib.
-	* libc/include/unistd.h: Ditto.
-	* libc/include/stat.h: Ditto.  Also declare struct stat64.
-
-2003-11-24  Artem B. Bityuckiy  <mail_lists@mail.ru>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Fix check for 'C' format
-	specifier to use ch instead of *fmt.
-
-2003-11-21  Artem B. Bityuckiy  <mail_lists@mail.ru>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R, get_arg): Move mb-specific
-	code within checks for MB_CAPABLE.  For non-mb-capable platforms,
-	use simple byte logic.
-
-2003-11-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfscanf.c (__svfscanf_r)[!_NO_LONGDBL]: Don't use
-	_strtold routine for processing floats and doubles since it
-	is not as fast as _strtod_r.
-
-2003-11-20 Dhananjay Deshpande <dhananjayd@kpitcummins.com> 
-
-	* libc/machine/h8300/defines.h : Correct pointer register defines 
-	for normal mode.
-	* libc/machine/h8300/memcpy.S : Use add/sub instead of adds/subs 
-	for normal mode.
-	* libc/machine/h8300/reg_memcpy.S : Likewise.
-	* libc/machine/h8300/reg_memset.S : Likewise.
-	* libc/machine/h8300/strcmp.S : Likewise.
-
-2003-11-19  Nicholas Wourms  <nwourms@netscape.net>
-
-	* configure.host: Enable positional arguments for printf
-	family for Cygwin.
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Remove extraneous
-	pointer reference for quad_ptr_t.
-
-2003-11-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/scanf.c: Don't include local.h more than once.
-
-2003-11-18  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/fcntl.h: Declare _open64.
-	* libc/include/sys/stat.h: Declare _fstat64.
-	* libc/include/sys/unistd.h: Declare _lseek64.
-
-2003-11-17  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/stdlib.h (getprogname): Declare for Cygwin.
-	(setprogname): Ditto.
-
-2003-11-10  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/powerpc/ufix64toa.c (_ufix64to_r): Fix shifts
-	to use (Ebits + 1) which accounts for the sign-bit.
-
-2003-11-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Remove -DLOOSE_KERNEL_NAMES flag for linux 
-	x86 build.
-	* iconvdata/Makefile.am: Make dependent on newlib's configure.host
-	and set up default flags to pass to aclocal.
-	* iconvdata/Makefile.in: Regenerated.
-	* libc/sys/linux/Makefile.am: Add _ELIX_LEVEL_4 getlogin, getpwnam,
-	and getpwuid routines.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/getlogin.c: New stub file to allow x86-linux
-	applications to link with newlib's shared libc library.
-	* libc/sys/linux/getpwnam.c: Ditto.
-	* libc/sys/linux/getpwuid.c: Ditto.
-	* libc/sys/linux/sys/types.h: Include <features.h> and supply types
-	that were formerly supplied by /usr/include/linux/types.h with
-	kernel types.
-	* testsuite/newlib.wctype/twctype.c: Fix testcase to properly
-	test _ELIX_LEVEL macro.
-
-2003-11-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Fix typos that should be
-	referring to _NO_LONGLONG macro.
-
-2003-11-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/linuxthreads/td_init.c: Replace function name
-	in LOG() macro so this will compile on gcc 3.4 and up.
-	* libc/sys/linux/linuxthreads/td_log.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_clear_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_delete.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_enable_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_event_addr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_event_getmsg.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_nthreads.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_ph.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_map_id2thr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_new.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_reset_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_set_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_setconcurrency.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_thr_iter.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_tsd_iter.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_clear_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_dbresume.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_dbsuspend.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_event_enable.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_event_getmsg.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_get_info.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getfpregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getgregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getxregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getxregsize.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_set_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setfpregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setgregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setprio.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setsigpending.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setxregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_sigsetmask.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_tsd.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_validate.c: Ditto.
-
-2003-11-05  Jeff Johnston  <jjohnstn@redhat.com>
-            Artem B. Bityuckiy  <mail_lists@mail.ru>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Add support for
-	%ls, %S, %lc, and %C format specifiers.
-	(get_arg): Ditto.
-	* libc/stdio/sprintf.c: Add documentation regarding new
-	format specifiers added in vfprintf.c.
-
-2003-11-05  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/wcsrtombs.c (_wcsrtombs_r): Numerous fixes
-	to make code work as specified in standard.
-
-2003-10-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.in: Use absolute newlib basedir when forming
-	CC_FOR_NEWLIB include options.
-	* configure: Regenerated.
-
-2003-10-23  Artem B. Bityuckiy  <mail_lists@mail.ru>
-
-	* libc/string/wcsnlen.c: New file.
-	* libc/include/wchar.h: Add wcsnlen prototype.
-	* libc/string/Makefile.am: Add wcsnlen support.
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/wcstrings.tex: Add wcsnlen documentation.
-
-2003-10-22  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/stdlib/exit.c (exit): Handle null _GLOBAL_REENT->_atexits.
-
-2003-10-20  Bob Wilson  <bob.wilson@acm.org>
-
-	* libc/locale/locale.c: Use double quotes in code.
-	* libc/locale/locale.tex: Likewise.
-	* libc/libc.texinfo: Hyphenate "floating-point".
-	* libc/machine/necv70/necv70.tex: Likewise.
-	* libc/stdio/sprintf.c: Likewise.
-	* libc/stdio/sscanf.c: Likewise.
-	* libc/stdlib/atof.c: Likewise.
-	* libc/stdlib/ldtoa.c: Fix comment typo.
-	* libc/stdlib/div.c: Use @ifnottex instead of @ifinfo.
-	* libc/stdlib/ldiv.c: Likewise.
-	* libm/common/s_expm1.c: Likewise.
-	* libm/common/s_ilogb.c: Hyphenate "floating-point".  Use "nonzero".
-	* libm/common/s_infinity: Hyphenate "double- and single-precision".
-	* libm/common/s_nan.c: Likewise.  Also correct the FUNCTION summary.
-	* libm/common/s_nextafter.c: Fix typo.  Hyphenate "double-precision"
-	and "floating-point".
-	* libm/common/s_scalbn.c: Correct the FUNCTION summary.
-	* libm/math/e_pow.c: Fix comment typo.
-	* libm/math/math.tex: Hyphenate "single-precision" and "floating-point".
-	* libm/math/s_asinh.c: Use @ifnottex instead of @ifinfo.
-	* libm/math/s_atan.c: Likewise.
-	* libm/math/s_frexp.c: Likewise.  Also use "nonzero".
-	* libm/math/s_isnan.c: Hyphenate "single-precision" and
-	"floating-point".  Use "nonzero".
-	* libm/math/s_ldexp.c: Use @ifnottex instead of @ifinfo.
-	* libm/math/w_acos.c: Likewise.
-	* libm/math/w_acosh.c: Likewise.
-	* libm/math/w_asin.c: Likewise.
-	* libm/math/w_atan2.c: Likewise.
-	* libm/math/w_atanh.c: Likewise.
-	* libm/math/w_cosh.c: Likewise.
-	* libm/math/w_exp.c: Likewise.
-	* libm/math/w_exp2.c: Likewise.  Add missing @end and missing @tex
-	version of 2^x in the description.
-	* libm/math/w_fmod.c: Use @ifnottex instead of @ifinfo.
-	* libm/math/w_gamma.c: Likewise.
-	* libm/math/w_hypot.c: Likewise.
-	* libm/math/w_j0.c: Likewise.
-	* libm/math/w_sinh.c: Likewise.
-	* libm/math/w_pow.c: Replace "exp1.0nt" with "exponent".
-	* libm/mathfp/mathfp.tex: Hyphenate "single-precision" and
-	"floating-point".
-	* libm/mathfp/e_acosh.c: Use @ifnottex instead of @ifinfo.
-	* libm/mathfp/e_atanh.c: Likewise.
-	* libm/mathfp/e_hypot.c: Likewise.
-	* libm/mathfp/er_lgamma.c: Likewise.
-	* libm/mathfp/s_acos.c: Likewise.
-	* libm/mathfp/s_asine.c: Likewise.
-	* libm/mathfp/s_asinh.c: Likewise.
-	* libm/mathfp/s_atan.c: Likewise.
-	* libm/mathfp/s_atan2.c: Likewise.
-	* libm/mathfp/s_atangent.c: Likewise.
-	* libm/mathfp/s_cosh.c: Likewise.
-	* libm/mathfp/s_exp.c: Likewise.
-	* libm/mathfp/s_fmod.c: Likewise.
-	* libm/mathfp/s_frexp.c: Likewise.  Also use "nonzero".
-	* libm/mathfp/s_isnan.c: Hyphenate "single-precision" and
-	"floating-point".  Use "nonzero".
-	* libm/math/s_pow.c: Replace "exp1.0nt" with "exponent".
-	* libm/mathfp/s_ldexp.c: Use @ifnottex instead of @ifinfo.
-	* libm/mathfp/s_sineh.c: Likewise.
-	* libm/mathfp/w_jn.c: Likewise.
-
-2003-10-15  Alexandre Oliva  <aoliva@redhat.com>
-
-	* Makefile.am: Add $(MAKE) comments to multido and multiclean
-	lines, to enable parallel make.
-	* Makefile.in: Rebuilt.
-
-2003-10-14  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/time/clock.c: Clarify documentation of return value when no
-	measurement is available.
-
-2003-09-29  Ian Lance Taylor  <ian@wasabisystems.com>
-
-	* libm/configure.in: Check libm_machine_dir, not machine_dir.
-	* libm/configure: Regenerate.
-	* libm/Makefile.in: Ditto.
-
-2003-09-29  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/strncpy.S: New file.
-	* libc/machine/sh/Makefile.am: Add entry & rule for new file.
-	* libc/machine/sh/Makefile.in: Regenerate.
-
-2003-09-11  James E Wilson  <wilson@specifixinc.com>
-
-	* MAINTAINERS: Update my e-mail address.
-
-2003-09-10  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/unistd.h: Declare function daemon for Cygwin.
-
-2003-09-09  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/powerpc/fix64.h: Fix typo for _simdldcheck
-	prototype.
-	* libc/machine/powerpc/simdldtoa.c: Remove prototype for
-	_simdldcheck().  Also add unsigned cast for index variable in
-	for loop using sizeof operators.
-	* libc/machine/powerpc/strtoufix32.c: Remove unused variable.
-	* libc/machine/powerpc/strtosfix64.c: Fix call to _simdldcheck.
-	* libc/machine/powerpc/strtoufix64.c (_strtoufix64_r): Ditto
-	plus fix shift calculation for determining if there is a
-	carry from word2.
-
-2003-09-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/grp.h: Don't define setgrfile, group_from_gid and
-	setgroupent for Cygwin.
-
-2003-09-05  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/exit.c (exit): Setting of struct _atexit ptr p
-	is different for _REENT_SMALL than when using regular reent
-	struct.
-
-2003-09-05  Ben Elliston  <bje@wasabisystems.com>
-
-	* libc/ctype/wctype.c (_DEFUN): Remove empty default case, as
-	modern versions of GCC issue a warning.
-
-	* libc/machine/xscale/memcmp.c (memcmp): Strip trailing whitespace
-	after continuation characters that induces a warning from modern
-	versions of GCC.
-
-2003-09-04  Ben Elliston  <bje@wasabisystems.com>
-
-	* libc/stdlib/mstats.c[_ELIX_LEVEL]: Fix guards.  #ifndef FOO ||
-	FOO >= 2 is invalid; use #if !defined (FOO) || FOO >= 2 instead.
-
-2003-09-02  Thomas Pfaff  <tpfaff@gmx.net>
-
-	* libc/stdlib/atexit.c: Rename _REENT to _GLOBAL_REENT throughout.
-	* libc/stdlib/exit.c : Ditto.
-	* libc/stdlib/on_exit.c: Ditto.
-
-2003-08-27  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/reent.h: Define stat64 as __stat64 when
-	compiling newlib for Cygwin.
-
-2003-08-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/stat.h[__CYGWIN__]: Only define stat64 as
-	__stat64 when compiling newlib.
-
-2003-08-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h: Allow the io64 function prototypes for
-	Cygwin when compiling newlib.
-	* libc/include/sys/stat.h[__CYGWIN__]: Define stat64 as __stat64
-	to expose the Cygwin struct __stat64 type.
-	* libc/stdio64/fseeko64.c: Use _fstat64_r and pass a struct stat64
-	pointer.
-	* libc/stdio64/tmpfile64.c(_tmpfile64_r): Call _fopen64_r.
-
-2003-08-23  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdio64/fseeko64.c (fseeko64_r): Rename second fseeko64_r
-	definition to fseeko64.
-
-2003-08-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h: Add _GLOBAL_REENT macro.
-	* libc/stdio: Globally remove/replace all references to fp->_data.
-	Replace with _REENT or _GLOBAL_REENT where appropriate.
-	* libc/stdio/asprintf.c: Ditto.
-	* libc/stdio/fclose.c: Ditto.
-	* libc/stdio/fvwrite.c: Ditto.
-	* libc/stdio/makebuf.c: Ditto.
-	* libc/stdio/refill.c: Ditto.
-	* libc/stdio/local.h: Ditto.
-	* libc/stdio/setvbuf.c: Ditto.
-	* libc/stdio/sscanf.c: Ditto.
-	* libc/stdio/stdio.c: Ditto.
-	* libc/stdio/ungetc.c: Ditto.
-	* libc/stdio/vfscanf.c: Ditto.
-	* libc/stdio/vsscanf.c: Ditto.
-	* libc/stdio/fopen.c: Ditto.  Also use _fseek_r in _fopen_r.
-	* libc/stdio/vasprintf.c: Ditto.  Also call _vfprintf_r directly.
-	* libc/stdio/vsnprintf.c: Ditto.
-	* libc/stdio/vsprintf.c: Ditto.
-	* libc/stdio/fcloseall.c(fcloseall): Use _GLOBAL_REENT macro
-	instead of _REENT to walk file list.
-	* libc/stdio/fflush.c: Ditto.
-	* libc/stdio/fgetpos.c: Add reentrant version and have regular
-	version call reentrant version with _REENT argument.
-	* libc/stdio/fsetpos.c: Ditto.
-	* libc/stdio/fseek.c: Ditto.
-	* libc/stdio/fseeko.c: Ditto.
-	* libc/stdio/ftell.c: Ditto.
-	* libc/stdio/ftello.c: Ditto.
-	* libc/stdio/freopen.c: Ditto.
-	* libc/stdio/findfp.c: Use _GLOBAL_REENT pointer when adding
-	new files to chain.  Also use _GLOBAL_REENT pointer for
-	cleaning up.
-	* libc/stdio/fiprintf.c: Reformatted to minimize duplicate code.
-	* libc/stdio/siprintf.c: Ditto.
-	* libc/stdio/iprintf.c: Ditto.
-	* libc/stdio/fprintf.c: Ditto.
-	* libc/stdio/printf.c: Ditto.
-	* libc/stdio/snprintf.c: Call _vfprintf_r directly.
-	* libc/stdio/sprintf.c: Ditto.
-	* libc/stdio/vprintf.c: Ditto.  Also add _REENT_ONLY check.
-	* libc/stdio/rewind.c: Call _fseek_r directly.
-	* libc/stdio/tmpfile.c: Call _fopen_r and _remove_r directly.
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Change _r routines to use
-	data pointer.
-	(get_arg): Add extra struct _reent pointer argument.
-	* libc/stdio64/fgetpos64.c: Add _r versions, remove any reference
-	to fp->_data.
-	* libc/stdio64/fopen64.c: Ditto.
-	* libc/stdio64/freopen64.c: Ditto.
-	* libc/stdio64/fsetpos64.c: Ditto.
-	* libc/stdio64/ftello64.c: Ditto.
-	* libc/stdio64/local64.h: Ditto.
-	* libc/stdio64/stdio64.c: Ditto.
-	* libc/stdio64/fseeko64.c: Ditto plus use _fstat_r instead of
-	_fstat64_r for the meantime.
-
-2003-08-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/mallocr.c (mALLOc, rEALLOc, mEMEALIGn): Enhance
-	overflow detection.
-	
-2003-08-13  Aldy Hernandez  <aldyh@redhat.com>
-	
-	* libc/machine/powerpc/machine/stdlib.h: Wrap SPE functions in
-	extern "C".
-
-2003-08-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h: Add prototypes for __signbitf and
-	__signbitd.
-
-2003-07-31  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/ctype/iswalpha.c: Fix calls to __jp2uc to pass the
-	correct type of conversion when dealing with EUCJP or SJIS.
-	* libc/ctype/iswblank.c: Ditto.
-	* libc/ctype/iswcntrl.c: Ditto.
-	* libc/ctype/iswprint.c: Ditto.
-	* libc/ctype/iswpunct.c: Ditto.
-	* libc/ctype/iswspace.c: Ditto.
-	* libc/ctype/towlower.c: Ditto.
-	* libc/ctype/towupper.c: Ditto.
-
-2003-07-31  Nick Clifton  <nickc@redhat.com>
-
-	* libc/sys/sysnecv850/crt0.S (_start): Allocate 4 slots on stack
-	before calling main, in case it saves its argument registers.
-        Remove reference to deleted v850ea port.
-        * configure.host: Remove reference to deleted v850ea port.
-        Do not use -mv850 when building for v850e target.  This
-	prevents the ctbp system register from being initialised.
-
-2003-07-29  Honda Hiroki  <hhonda@ipflex.com>
-
-	* libc/stdio/vfprintf.c: Set output size to 1 when
-	we have %f format with precision 0 and # flag not specified.
-
-2003-07-29  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/machine/mn10300/setjmp.S: Never emit both .am33 and
-	.am33_2.
-
-2003-07-25  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdio64/fdopen64.c: Include sys/lock.h.
-
-2003-07-25  Christopher Faylor  <cgf@redhat.com>
-
-	* configure.host: Find cygwin include directory, when appropriate.
-
-2003-07-24  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdio64/fdopen64.c: New file.
-	* libc/stdio64/Makefile.am (LIB_OBJS): Add fdopen64.o
-	* libc/stdio64/Makefile.in: Regenerate.
-	* libc/include/stdio.h (fdopen64): Define.
-	* libc/include/stdio.h (_fdopen64_r): Ditto.
-
-2003-07-10  Alexandre Oliva  <aoliva@redhat.com>
-
-	2000-04-27  Alexandre Oliva  <aoliva@cygnus.com>
-	* libc/include/machine/setjmp.h (_JBLEN, AM33/2.0): Set to 26.
-	* libc/machine/mn10300/setjmp.S (setjmp, longjmp): Save and
-	restore callee-saved FP registers.
-
-2003-07-10  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/include/sys/unistd.h (ftruncate, truncate): Also declare
-	for __sh__.
-	* libc/sys/sh/Makefile.am (lib_a_SOURCES): Add ftruncate.c and
-	truncate.c.
-	* libc/sys/sh/Makefile.in: Regenerate.
-	* libc/sys/sh/sys/syscall.h: (SYS_truncate, SYS_ftruncate): Define.
-	* libc/sys/sh/ftruncate.c: New file.
-	* libc/sys/sh/truncate.c: Likewise.
-
-2003-07-09  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/include/math.h (nan, nanf): Update prototype to C99.
-	* libm/common/s_nan.c (nan): Likewise.
-	* libm/common/s_nanf.c (nanf, nan): Likewise.
-	* libc/sys/linux/cmath/math_private.h (nan, nanf): Likewise.
-
-2003-07-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdbool.h: Removed as this is defined by gcc.
-
-2003-07-03  Shaun Jackman  <sjackman@pathwayconnect.com>
-
-	* libc/include/stdbool.h: New header file defined by C99.
-
-2003-07-02  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/types.h (int8_t): Make signed.
-
-2003-07-02  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/include/mqueue.h: Add include of <sys/fcntl.h>.
-
-2003-06-27  Jose Goncalves  <jose.goncalves@inov.pt>
-
-	* libc/sys/linux/mq_open.c (mq_open): Only set created flag
-	on if we actually created the shared memory file exclusively.
-
-2003-06-27  Joe Vornehm  <joev@mitre.org>
-
-	* libm/common/s_fpclassify.c (__fpclassifyf): Fix
-	comparisons to account for unsigned internal value w.
-
-2003-06-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/mq_open.c (mq_open): Must allocate rdbuf and
-	wrbuf for a non-creating open.
-
-2003-06-24  Kazu Hirata  <kazu@cs.umass.edu>
-
-	* libc/machine/h8300/setarch.h: New.
-	* libc/machine/h8300/memcpy.S: Use it.
-	* libc/machine/h8300/memset.S: Likewise.
-	* libc/machine/h8300/reg_memcpy.S: Likewise.
-	* libc/machine/h8300/reg_memset.S: Likewise.
-	* libc/machine/h8300/setjmp.S: Likewise.
-	* libc/machine/h8300/strcmp.S: Likewise.
-
-2003-06-24  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/sys/h8300hms/crt0.S (_start): Fix register sizes in call
-	to atexit().
-
-2003-06-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host (iq2000): Add tabs.
-
-2003-06-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT_PTR): Fix macros
-	to handle latest on_exit change.
-	* libc/sys/linux/Makefile.am: Remove special compilation
-	for malloc.c and mcheck.c.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/mntent.c: Add definition of _LIBC flag
-	after including <features.h>.
-	* libc/sys/linux/mcheck.c: Ditto.
-	* libc/sys/linux/malloc.c: Ditto plus define _GNU_SOURCE
-	for <features.h>.
-	* libc/sys/linux/intl/Makefile.am: Remove -D_LIBC and
-	add -DNOT_IN_libc to C flags.
-	* libc/sys/linux/intl/Makefile.in: Regenerated.
-	* libc/sys/linux/intl/config.h: Add definition of _LIBC.
-	* libc/sys/linux/linuxthreads/semaphore.h: Include
-	<bits/pthreadtypes.h>.
-	* libc/sys/linux/sys/dirent.h: Define _LIBC and NOT_IN_libc after
-	including <features.h>.
-	* libc/sys/linux/sys/lock.h: Ditto.
-
-2003-06-11  Nick Clifton  <nickc@redhat.com>
-
-	* libc/reent/reent.c (reclaim_reent): Fix typo in code to free
-	_on_exit_args_ptr.
-
-2003-06-10  Stan Cox  <scox@redhat.com>
-            Anthony Green  <green@redhat.com>
-	
-	* configure.host: Add iq2000 support.
-	* newlib/libc/include/machine/ieeefp.h: Ditto.
-	* newlib/libc/include/machine/setjmp.h: Ditto.
-	* libc/machine/iq2000, libc/machine/iq2000/setjmp.S,
-	libc/machine/iq2000/aclocal.m4, libc/machine/iq2000/configure,
-	libc/machine/iq2000/configure.in, libc/machine/iq2000/Makefile.am,
-	libc/machine/iq2000/Makefile.in: New files.
-
-2003-06-10  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/sys/h8300hms/setarch.h: New file.
-	* libc/sys/h8300hms/close.S, libc/sys/h8300hms/fstat.S,
-	libc/sys/h8300hms/lseek.S, libc/sys/h8300hms/open.S,
-	libc/sys/h8300hms/read.S, libc/sys/h8300hms/stat.S,
-	libc/sys/h8300hms/write.S, libc/sys/h8300hms/crt0.S: Use it.
-
-2003-06-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/argz/argz_add.c: Change to use _DEFUN macro for function
-        definition.
-        * libc/argz/argz_add_sep.c: Ditto.
-        * libc/argz/argz_append.c libc/argz/argz_count.c: Ditto.
-        * libc/argz/argz_create.c libc/argz/argz_create_sep.c: Ditto.
-        * libc/argz/argz_delete.c libc/argz/argz_extract.c: Ditto.
-        * libc/argz/argz_insert.c libc/argz/argz_next.c: Ditto.
-        * libc/argz/argz_replace.c libc/argz/argz_stringify.c: Ditto.
-        * libc/argz/envz_add.c libc/argz/envz_entry.c: Ditto.
-        * libc/argz/envz_get.c libc/argz/envz_merge.c: Ditto.
-        * libc/argz/envz_remove.c libc/argz/envz_strip.c: Ditto.
-        * libc/locale/nl_langinfo.c libc/misc/ffs.c: Ditto.
-        * libc/posix/closedir.c libc/posix/creat.c: Ditto.
-        * libc/posix/execl.c libc/posix/execle.c: Ditto.
-        * libc/posix/execlp.c libc/posix/execve.c: Ditto.
-        * libc/posix/isatty.c libc/posix/opendir.c: Ditto.
-        * libc/posix/popen.c libc/posix/readdir.c: Ditto.
-        * libc/posix/readdir_r.c libc/posix/rewinddir.c: Ditto.
-        * libc/posix/scandir.c libc/posix/seekdir.c: Ditto.
-        * libc/posix/telldir.c libc/search/hcreate.c: Ditto.
-        * libc/search/tdelete.c libc/search/tdestroy.c: Ditto.
-        * libc/search/tfind.c libc/search/tsearch.c: Ditto.
-        * libc/search/twalk.c libc/signal/signal.c: Ditto.
-
-2003-06-05  Nick Clifton  <nickc@redhat.com>
-	
-	* libc/include/sys/reent.h (struct _on_exit_args): New
-	structure containing fields used by the on_exit() function.
-        (struct _atexit): Include struct _on_exit_args.  For
-	_REENT_SMALL do his via a pointer that is initialised when
-	needed.
-        * libc/reent/reent.c (_reclaim_reent): Free the _on_exit_args
-	structure, if one has been allocated.
-        * libc/stdlib/atexit.c (atexit): Update indirection to
-	_fntypes field.
-        * libc/stdlib/on_exit.c (on_exit): Indirect via the
-	_on_exit_args structure.  For _REENT_SMALL, allocate a
-	structure if one does not exist.
-        * libc/stdlib/exit.c (exit): Indirect via the _on_exit_args
-	structure.
-
-2003-06-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/net/Makefile.am: Remove extraneous markers.
-	* libc/sys/linux/net/Makefile.in: Regenerated.
-
-2003-06-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/reent/execr.c: Use _DEFUN macro for function declaration.
-	* libc/reent/fcntlr.c: Ditto.
-	* libc/reent/fstat64r.c: Ditto.
-	* libc/reent/linkr.c: Ditto.
-	* libc/reent/lseek64r.c: Ditto.
-	* libc/reent/lseekr.c: Ditto.
-	* libc/reent/openr.c: Ditto.
-	* libc/reent/readr.c: Ditto.
-	* libc/reent/reent.c: Ditto.
-	* libc/reent/sbrkr.c: Ditto.
-	* libc/reent/signalr.c: Ditto.
-	* libc/reent/signgam.c: Ditto.
-	* libc/reent/statr.c: Ditto.
-	* libc/reent/timer.c: Ditto.
-	* libc/reent/unlinkr.c: Ditto.
-	* libc/reent/writer.c: Ditto.
-	* libc/syscalls/sysclose.c: Ditto.
-	* libc/syscalls/sysexecve.c: Ditto.
-	* libc/syscalls/sysfcntl.c: Ditto.
-	* libc/syscalls/sysfork.c: Ditto.
-	* libc/syscalls/sysfstat.c: Ditto.
-	* libc/syscalls/sysgetpid.c: Ditto.
-	* libc/syscalls/sysgettod.c: Ditto.
-	* libc/syscalls/syskill.c: Ditto.
-	* libc/syscalls/syslink.c: Ditto.
-	* libc/syscalls/syslseek.c: Ditto.
-	* libc/syscalls/sysopen.c: Ditto.
-	* libc/syscalls/sysread.c: Ditto.
-	* libc/syscalls/syssbrk.c: Ditto.
-	* libc/syscalls/sysstat.c: Ditto.
-	* libc/syscalls/systimes.c: Ditto.
-	* libc/syscalls/sysunlink.c: Ditto.
-	* libc/syscalls/syswait.c: Ditto.
-	* libc/syscalls/syswrite.c: Ditto.
-
-2003-06-03  Till Straumann  <strauman@SLAC.Stanford.EDU>
-
-	* libc/time/tzset_r.c: Change local variables that are
-	set via sscanf using the %h format specifier to be unsigned short
-	instead of int.
-
-2003-05-30  Kelley Cook  <kelleycook@wideopenwest.com>
-
-	* configure.host:  Allow i[34567]86 variant.
-	* configure.in: Likewise.
-	* README: Likewise to the docs.
-	* configure: Regenerated.
-	* Makefile.in: Ditto.
-
-2003-05-28  Jeff Johnston  <jjohnstn@redhat.com>
-	    Tom Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.in: Add iconvdata support for x86 linux.
-	* configure: Regenerated.
-	* libc/sys/linux/Makefile.am: Add EL/IX level 3 network, dynamic 
-	library, iconv, and linuxthreads support.
-	* libc/sys/linux/configure.in: Ditto.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/configure: Ditto.
-	* iconvdata/EUC-JP.irreversible: New file.
-	* iconvdata/Makefile.am: Ditto.
-	* iconvdata/Makefile.in: Ditto.
-	* iconvdata/SJIS.irreversible: Ditto.
-	* iconvdata/aclocal.m4: Ditto.
-	* iconvdata/configure: Ditto.
-	* iconvdata/configure.in: Ditto.
-	* iconvdata/dummy.c: Ditto.
-	* iconvdata/euc-jp.c: Ditto.
-	* iconvdata/gconv-modules: Ditto.
-	* iconvdata/jis0201.c: Ditto.
-	* iconvdata/jis0201.h: Ditto.
-	* iconvdata/jis0208.c: Ditto.
-	* iconvdata/jis0208.h: Ditto.
-	* iconvdata/jis0212.c: Ditto.
-	* iconvdata/jis0212.h: Ditto.
-	* iconvdata/sjis.c: Ditto.
-	* libc/include/errno.h: Protect definition of error_t.
-	* libc/sys/linux/gethostid.c: New file.
-	* libc/sys/linux/sethostid.c: Ditto.
-	* libc/sys/linux/dl/Makefile.am: Ditto.
-	* libc/sys/linux/dl/Makefile.in: Ditto.
-	* libc/sys/linux/dl/abi-tag.h: Ditto.
-	* libc/sys/linux/dl/atomicity.h: Ditto.
-	* libc/sys/linux/dl/dl-addr.c: Ditto.
-	* libc/sys/linux/dl/dl-cache.c: Ditto.
-	* libc/sys/linux/dl/dl-cache.h: Ditto.
-	* libc/sys/linux/dl/dl-close.c: Ditto.
-	* libc/sys/linux/dl/dl-debug.c: Ditto.
-	* libc/sys/linux/dl/dl-deps.c: Ditto.
-	* libc/sys/linux/dl/dl-dst.h: Ditto.
-	* libc/sys/linux/dl/dl-error.c: Ditto.
-	* libc/sys/linux/dl/dl-fini.c: Ditto.
-	* libc/sys/linux/dl/dl-init.c: Ditto.
-	* libc/sys/linux/dl/dl-iteratephdr.c: Ditto.
-	* libc/sys/linux/dl/dl-libc.c: Ditto.
-	* libc/sys/linux/dl/dl-librecon.h: Ditto.
-	* libc/sys/linux/dl/dl-load.c: Ditto.
-	* libc/sys/linux/dl/dl-lookup.c: Ditto.
-	* libc/sys/linux/dl/dl-lookupcfg.h: Ditto.
-	* libc/sys/linux/dl/dl-minimal.c: Ditto.
-	* libc/sys/linux/dl/dl-misc.c: Ditto.
-	* libc/sys/linux/dl/dl-object.c: Ditto.
-	* libc/sys/linux/dl/dl-open.c: Ditto.
-	* libc/sys/linux/dl/dl-osinfo.h: Ditto.
-	* libc/sys/linux/dl/dl-profile.c: Ditto.
-	* libc/sys/linux/dl/dl-profstub.c: Ditto.
-	* libc/sys/linux/dl/dl-reloc.c: Ditto.
-	* libc/sys/linux/dl/dl-runtime.c: Ditto.
-	* libc/sys/linux/dl/dl-support.c: Ditto.
-	* libc/sys/linux/dl/dl-sym.c: Ditto.
-	* libc/sys/linux/dl/dl-version.c: Ditto.
-	* libc/sys/linux/dl/dlfcn.h: Ditto.
-	* libc/sys/linux/dl/do-lookup.h: Ditto.
-	* libc/sys/linux/dl/do-rel.h: Ditto.
-	* libc/sys/linux/dl/dynamic-link.h: Ditto.
-	* libc/sys/linux/dl/kernel-features.h: Ditto.
-	* libc/sys/linux/dl/ldsodefs.h: Ditto.
-	* libc/sys/linux/dl/libintl.h: Ditto.
-	* libc/sys/linux/dl/trusted-dirs.h: Ditto.
-	* libc/sys/linux/dl/unsecvars.h: Ditto.
-	* libc/sys/linux/iconv/Makefile.am: Ditto.
-	* libc/sys/linux/iconv/Makefile.in: Ditto.
-	* libc/sys/linux/iconv/categories.def: Ditto.
-	* libc/sys/linux/iconv/dummy-repertoire.c: Ditto.
-	* libc/sys/linux/iconv/gconv.c: Ditto.
-	* libc/sys/linux/iconv/gconv_builtin.c: Ditto.
-	* libc/sys/linux/iconv/gconv_builtin.h: Ditto.
-	* libc/sys/linux/iconv/gconv_cache.c: Ditto.
-	* libc/sys/linux/iconv/gconv_charset.h: Ditto.
-	* libc/sys/linux/iconv/gconv_close.c: Ditto.
-	* libc/sys/linux/iconv/gconv_conf.c: Ditto.
-	* libc/sys/linux/iconv/gconv_db.c: Ditto.
-	* libc/sys/linux/iconv/gconv_dl.c: Ditto.
-	* libc/sys/linux/iconv/gconv_int.h: Ditto.
-	* libc/sys/linux/iconv/gconv_open.c: Ditto.
-	* libc/sys/linux/iconv/gconv_simple.c: Ditto.
-	* libc/sys/linux/iconv/gconv_trans.c: Ditto.
-	* libc/sys/linux/iconv/hash-string.h: Ditto.
-	* libc/sys/linux/iconv/iconv.c: Ditto.
-	* libc/sys/linux/iconv/iconv.h: Ditto.
-	* libc/sys/linux/iconv/iconv_charmap.c: Ditto.
-	* libc/sys/linux/iconv/iconv_close.c: Ditto.
-	* libc/sys/linux/iconv/iconv_open.c: Ditto.
-	* libc/sys/linux/iconv/iconvconfig.c: Ditto.
-	* libc/sys/linux/iconv/iconvconfig.h: Ditto.
-	* libc/sys/linux/iconv/loadinfo.h: Ditto.
-	* libc/sys/linux/iconv/localeinfo.h: Ditto.
-	* libc/sys/linux/iconv/loop.c: Ditto.
-	* libc/sys/linux/iconv/skeleton.c: Ditto.
-	* libc/sys/linux/iconv/strtab.c: Ditto.
-	* libc/sys/linux/include/dl-hash.h: Ditto.
-	* libc/sys/linux/include/dlfcn.h: Ditto.
-	* libc/sys/linux/include/fnmatch.h: Ditto.
-	* libc/sys/linux/include/gconv.h: Ditto.
-	* libc/sys/linux/include/glob.h: Ditto.
-	* libc/sys/linux/include/hesiod.h: Ditto.
-	* libc/sys/linux/include/ifaddrs.h: Ditto.
-	* libc/sys/linux/include/libc_private.h: Ditto.
-	* libc/sys/linux/include/link.h: Ditto.
-	* libc/sys/linux/include/namespace.h: Ditto.
-	* libc/sys/linux/include/netconfig.h: Ditto.
-	* libc/sys/linux/include/netdb.h: Ditto.
-	* libc/sys/linux/include/nsswitch.h: Ditto.
-	* libc/sys/linux/include/regex.h: Ditto.
-	* libc/sys/linux/include/resolv.h: Ditto.
-	* libc/sys/linux/include/rune.h: Ditto.
-	* libc/sys/linux/include/runetype.h: Ditto.
-	* libc/sys/linux/include/semaphore.h: Ditto.
-	* libc/sys/linux/include/setlocale.h: Ditto.
-	* libc/sys/linux/include/un-namespace.h: Ditto.
-	* libc/sys/linux/include/wordexp.h: Ditto.
-	* libc/sys/linux/include/arpa/ftp.h: Ditto.
-	* libc/sys/linux/include/arpa/inet.h: Ditto.
-	* libc/sys/linux/include/arpa/nameser.h: Ditto.
-	* libc/sys/linux/include/arpa/nameser_compat.h: Ditto.
-	* libc/sys/linux/include/arpa/telnet.h: Ditto.
-	* libc/sys/linux/include/arpa/tftp.h: Ditto.
-	* libc/sys/linux/include/net/bpf.h: Ditto.
-	* libc/sys/linux/include/net/bpf_compat.h: Ditto.
-	* libc/sys/linux/include/net/bpfdesc.h: Ditto.
-	* libc/sys/linux/include/net/bridge.h: Ditto.
-	* libc/sys/linux/include/net/ethernet.h: Ditto.
-	* libc/sys/linux/include/net/fddi.h: Ditto.
-	* libc/sys/linux/include/net/if.h: Ditto.
-	* libc/sys/linux/include/net/if_arc.h: Ditto.
-	* libc/sys/linux/include/net/if_arp.h: Ditto.
-	* libc/sys/linux/include/net/if_atm.h: Ditto.
-	* libc/sys/linux/include/net/if_dl.h: Ditto.
-	* libc/sys/linux/include/net/if_gif.h: Ditto.
-	* libc/sys/linux/include/net/if_ieee80211.h: Ditto.
-	* libc/sys/linux/include/net/if_llc.h: Ditto.
-	* libc/sys/linux/include/net/if_media.h: Ditto.
-	* libc/sys/linux/include/net/if_mib.h: Ditto.
-	* libc/sys/linux/include/net/if_ppp.h: Ditto.
-	* libc/sys/linux/include/net/if_pppvar.h: Ditto.
-	* libc/sys/linux/include/net/if_slvar.h: Ditto.
-	* libc/sys/linux/include/net/if_sppp.h: Ditto.
-	* libc/sys/linux/include/net/if_stf.h: Ditto.
-	* libc/sys/linux/include/net/if_tap.h: Ditto.
-	* libc/sys/linux/include/net/if_tapvar.h: Ditto.
-	* libc/sys/linux/include/net/if_tun.h: Ditto.
-	* libc/sys/linux/include/net/if_tunvar.h: Ditto.
-	* libc/sys/linux/include/net/if_types.h: Ditto.
-	* libc/sys/linux/include/net/if_var.h: Ditto.
-	* libc/sys/linux/include/net/if_vlan_var.h: Ditto.
-	* libc/sys/linux/include/net/intrq.h: Ditto.
-	* libc/sys/linux/include/net/iso88025.h: Ditto.
-	* libc/sys/linux/include/net/net_osdep.h: Ditto.
-	* libc/sys/linux/include/net/netisr.h: Ditto.
-	* libc/sys/linux/include/net/pfil.h: Ditto.
-	* libc/sys/linux/include/net/pfkeyv2.h: Ditto.
-	* libc/sys/linux/include/net/ppp_comp.h: Ditto.
-	* libc/sys/linux/include/net/ppp_defs.h: Ditto.
-	* libc/sys/linux/include/net/radix.h: Ditto.
-	* libc/sys/linux/include/net/raw_cb.h: Ditto.
-	* libc/sys/linux/include/net/route.h: Ditto.
-	* libc/sys/linux/include/net/slcompress.h: Ditto.
-	* libc/sys/linux/include/net/slip.h: Ditto.
-	* libc/sys/linux/include/net/zlib.h: Ditto.
-	* libc/sys/linux/include/netinet/icmp6.h: Ditto.
-	* libc/sys/linux/include/netinet/icmp_var.h: Ditto.
-	* libc/sys/linux/include/netinet/if_atm.h: Ditto.
-	* libc/sys/linux/include/netinet/if_ether.h: Ditto.
-	* libc/sys/linux/include/netinet/igmp.h: Ditto.
-	* libc/sys/linux/include/netinet/igmp_var.h: Ditto.
-	* libc/sys/linux/include/netinet/in.h: Ditto.
-	* libc/sys/linux/include/netinet/in_gif.h: Ditto.
-	* libc/sys/linux/include/netinet/in_pcb.h: Ditto.
-	* libc/sys/linux/include/netinet/in_systm.h: Ditto.
-	* libc/sys/linux/include/netinet/in_var.h: Ditto.
-	* libc/sys/linux/include/netinet/ip.h: Ditto.
-	* libc/sys/linux/include/netinet/ip6.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_dummynet.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_ecn.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_encap.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_flow.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_fw.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_icmp.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_mroute.h: Ditto.
-	* libc/sys/linux/include/netinet/ip_var.h: Ditto.
-	* libc/sys/linux/include/netinet/ipprotosw.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp_debug.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp_fsm.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp_seq.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp_timer.h: Ditto.
-	* libc/sys/linux/include/netinet/tcp_var.h: Ditto.
-	* libc/sys/linux/include/netinet/tcpip.h: Ditto.
-	* libc/sys/linux/include/netinet/udp.h: Ditto.
-	* libc/sys/linux/include/netinet/udp_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/ah.h: Ditto.
-	* libc/sys/linux/include/netinet6/ah6.h: Ditto.
-	* libc/sys/linux/include/netinet6/esp.h: Ditto.
-	* libc/sys/linux/include/netinet6/esp6.h: Ditto.
-	* libc/sys/linux/include/netinet6/esp_rijndael.h: Ditto.
-	* libc/sys/linux/include/netinet6/icmp6.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6_gif.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6_ifattach.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6_pcb.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6_prefix.h: Ditto.
-	* libc/sys/linux/include/netinet6/in6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6_ecn.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6_fw.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6_mroute.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/ip6protosw.h: Ditto.
-	* libc/sys/linux/include/netinet6/ipcomp.h: Ditto.
-	* libc/sys/linux/include/netinet6/ipcomp6.h: Ditto.
-	* libc/sys/linux/include/netinet6/ipsec.h: Ditto.
-	* libc/sys/linux/include/netinet6/ipsec6.h: Ditto.
-	* libc/sys/linux/include/netinet6/mld6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/nd6.h: Ditto.
-	* libc/sys/linux/include/netinet6/pim6.h: Ditto.
-	* libc/sys/linux/include/netinet6/pim6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/raw_ip6.h: Ditto.
-	* libc/sys/linux/include/netinet6/scope6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/tcp6_var.h: Ditto.
-	* libc/sys/linux/include/netinet6/udp6_var.h: Ditto.
-	* libc/sys/linux/include/netns/idp.h: Ditto.
-	* libc/sys/linux/include/netns/idp_var.h: Ditto.
-	* libc/sys/linux/include/netns/ns.h: Ditto.
-	* libc/sys/linux/include/netns/ns_error.h: Ditto.
-	* libc/sys/linux/include/netns/ns_if.h: Ditto.
-	* libc/sys/linux/include/netns/ns_pcb.h: Ditto.
-	* libc/sys/linux/include/netns/sp.h: Ditto.
-	* libc/sys/linux/include/netns/spidp.h: Ditto.
-	* libc/sys/linux/include/netns/spp_debug.h: Ditto.
-	* libc/sys/linux/include/netns/spp_timer.h: Ditto.
-	* libc/sys/linux/include/netns/spp_var.h: Ditto.
-	* libc/sys/linux/include/rpc/Makefile: Ditto.
-	* libc/sys/linux/include/rpc/auth.h: Ditto.
-	* libc/sys/linux/include/rpc/auth_des.h: Ditto.
-	* libc/sys/linux/include/rpc/auth_kerb.h: Ditto.
-	* libc/sys/linux/include/rpc/auth_unix.h: Ditto.
-	* libc/sys/linux/include/rpc/clnt.h: Ditto.
-	* libc/sys/linux/include/rpc/clnt_soc.h: Ditto.
-	* libc/sys/linux/include/rpc/clnt_stat.h: Ditto.
-	* libc/sys/linux/include/rpc/des.h: Ditto.
-	* libc/sys/linux/include/rpc/des_crypt.h: Ditto.
-	* libc/sys/linux/include/rpc/nettype.h: Ditto.
-	* libc/sys/linux/include/rpc/pmap_clnt.h: Ditto.
-	* libc/sys/linux/include/rpc/pmap_prot.h: Ditto.
-	* libc/sys/linux/include/rpc/pmap_rmt.h: Ditto.
-	* libc/sys/linux/include/rpc/raw.h: Ditto.
-	* libc/sys/linux/include/rpc/rpc.h: Ditto.
-	* libc/sys/linux/include/rpc/rpc_com.h: Ditto.
-	* libc/sys/linux/include/rpc/rpc_msg.h: Ditto.
-	* libc/sys/linux/include/rpc/rpcb_clnt.h: Ditto.
-	* libc/sys/linux/include/rpc/rpcb_prot.h: Ditto.
-	* libc/sys/linux/include/rpc/rpcb_prot.x: Ditto.
-	* libc/sys/linux/include/rpc/rpcent.h: Ditto.
-	* libc/sys/linux/include/rpc/svc.h: Ditto.
-	* libc/sys/linux/include/rpc/svc_auth.h: Ditto.
-	* libc/sys/linux/include/rpc/svc_dg.h: Ditto.
-	* libc/sys/linux/include/rpc/svc_soc.h: Ditto.
-	* libc/sys/linux/include/rpc/types.h: Ditto.
-	* libc/sys/linux/include/rpc/xdr.h: Ditto.
-	* libc/sys/linux/intl/Makefile.am: Ditto.
-	* libc/sys/linux/intl/Makefile.in: Ditto.
-	* libc/sys/linux/intl/bindtextdom.c: Ditto.
-	* libc/sys/linux/intl/catgets.c: Ditto.
-	* libc/sys/linux/intl/catgetsinfo.h: Ditto.
-	* libc/sys/linux/intl/config.h: Ditto.
-	* libc/sys/linux/intl/dcgettext.c: Ditto.
-	* libc/sys/linux/intl/dcigettext.c: Ditto.
-	* libc/sys/linux/intl/dcngettext.c: Ditto.
-	* libc/sys/linux/intl/dgettext.c: Ditto.
-	* libc/sys/linux/intl/dngettext.c: Ditto.
-	* libc/sys/linux/intl/explodename.c: Ditto.
-	* libc/sys/linux/intl/finddomain.c: Ditto.
-	* libc/sys/linux/intl/gettext.c: Ditto.
-	* libc/sys/linux/intl/gettext.h: Ditto.
-	* libc/sys/linux/intl/gettextP.h: Ditto.
-	* libc/sys/linux/intl/hash-string.h: Ditto.
-	* libc/sys/linux/intl/l10nflist.c: Ditto.
-	* libc/sys/linux/intl/loadinfo.h: Ditto.
-	* libc/sys/linux/intl/loadmsgcat.c: Ditto.
-	* libc/sys/linux/intl/locale.alias: Ditto.
-	* libc/sys/linux/intl/localealias.c: Ditto.
-	* libc/sys/linux/intl/ngettext.c: Ditto.
-	* libc/sys/linux/intl/open_catalog.c: Ditto.
-	* libc/sys/linux/intl/plural.c: Ditto.
-	* libc/sys/linux/intl/plural.y: Ditto.
-	* libc/sys/linux/intl/stpcpy.c: Ditto.
-	* libc/sys/linux/intl/textdomain.c: Ditto.
-	* libc/sys/linux/linuxthreads/LICENSE: Ditto.
-	* libc/sys/linux/linuxthreads/Makefile.am: Ditto.
-	* libc/sys/linux/linuxthreads/Makefile.in: Ditto.
-	* libc/sys/linux/linuxthreads/aclocal.m4: Ditto.
-	* libc/sys/linux/linuxthreads/attr.c: Ditto.
-	* libc/sys/linux/linuxthreads/barrier.c: Ditto.
-	* libc/sys/linux/linuxthreads/bp-sym.h: Ditto.
-	* libc/sys/linux/linuxthreads/cancel.c: Ditto.
-	* libc/sys/linux/linuxthreads/condvar.c: Ditto.
-	* libc/sys/linux/linuxthreads/config.h: Ditto.
-	* libc/sys/linux/linuxthreads/configure: Ditto.
-	* libc/sys/linux/linuxthreads/configure.in: Ditto.
-	* libc/sys/linux/linuxthreads/defs.awk: Ditto.
-	* libc/sys/linux/linuxthreads/ecmutex.c: Ditto.
-	* libc/sys/linux/linuxthreads/events.c: Ditto.
-	* libc/sys/linux/linuxthreads/getcpuclockid.c: Ditto.
-	* libc/sys/linux/linuxthreads/getreent.c: Ditto.
-	* libc/sys/linux/linuxthreads/internals.h: Ditto.
-	* libc/sys/linux/linuxthreads/join.c: Ditto.
-	* libc/sys/linux/linuxthreads/joinrace.c: Ditto.
-	* libc/sys/linux/linuxthreads/kernel-features.h: Ditto.
-	* libc/sys/linux/linuxthreads/libc-internal.h: Ditto.
-	* libc/sys/linux/linuxthreads/libc-symbols.h: Ditto.
-	* libc/sys/linux/linuxthreads/linuxthreads.texi: Ditto.
-	* libc/sys/linux/linuxthreads/lockfile.c: Ditto.
-	* libc/sys/linux/linuxthreads/manager.c: Ditto.
-	* libc/sys/linux/linuxthreads/mq_notify.c: Ditto.
-	* libc/sys/linux/linuxthreads/mutex.c: Ditto.
-	* libc/sys/linux/linuxthreads/no-tsd.c: Ditto.
-	* libc/sys/linux/linuxthreads/oldsemaphore.c: Ditto.
-	* libc/sys/linux/linuxthreads/posix-timer.h: Ditto.
-	* libc/sys/linux/linuxthreads/prio.c: Ditto.
-	* libc/sys/linux/linuxthreads/proc_service.h: Ditto.
-	* libc/sys/linux/linuxthreads/pt-machine.c: Ditto.
-	* libc/sys/linux/linuxthreads/ptclock_gettime.c: Ditto.
-	* libc/sys/linux/linuxthreads/ptclock_settime.c: Ditto.
-	* libc/sys/linux/linuxthreads/ptfork.c: Ditto.
-	* libc/sys/linux/linuxthreads/pthread.c: Ditto.
-	* libc/sys/linux/linuxthreads/ptlongjmp.c: Ditto.
-	* libc/sys/linux/linuxthreads/queue.h: Ditto.
-	* libc/sys/linux/linuxthreads/reent.c: Ditto.
-	* libc/sys/linux/linuxthreads/reqsyscalls.c: Ditto.
-	* libc/sys/linux/linuxthreads/restart.h: Ditto.
-	* libc/sys/linux/linuxthreads/rwlock.c: Ditto.
-	* libc/sys/linux/linuxthreads/semaphore.c: Ditto.
-	* libc/sys/linux/linuxthreads/semaphore.h: Ditto.
-	* libc/sys/linux/linuxthreads/shlib-compat.h: Ditto.
-	* libc/sys/linux/linuxthreads/signals.c: Ditto.
-	* libc/sys/linux/linuxthreads/specific.c: Ditto.
-	* libc/sys/linux/linuxthreads/spinlock.c: Ditto.
-	* libc/sys/linux/linuxthreads/spinlock.h: Ditto.
-	* libc/sys/linux/linuxthreads/sysctl.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_init.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_log.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_symbol_list.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_clear_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_delete.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_enable_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_event_addr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_event_getmsg.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_nthreads.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_ph.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_get_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_map_id2thr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_new.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_reset_stats.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_set_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_setconcurrency.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_thr_iter.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_ta_tsd_iter.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_clear_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_dbresume.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_dbsuspend.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_event_enable.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_event_getmsg.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_get_info.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getfpregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getgregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getxregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_getxregsize.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_set_event.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setfpregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setgregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setprio.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setsigpending.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_setxregs.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_sigsetmask.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_tsd.c: Ditto.
-	* libc/sys/linux/linuxthreads/td_thr_validate.c: Ditto.
-	* libc/sys/linux/linuxthreads/testrtsig.h: Ditto.
-	* libc/sys/linux/linuxthreads/thread_db.h: Ditto.
-	* libc/sys/linux/linuxthreads/thread_dbP.h: Ditto.
-	* libc/sys/linux/linuxthreads/timer_create.c: Ditto.
-	* libc/sys/linux/linuxthreads/timer_delete.c: Ditto.
-	* libc/sys/linux/linuxthreads/timer_getoverr.c: Ditto.
-	* libc/sys/linux/linuxthreads/timer_gettime.c: Ditto.
-	* libc/sys/linux/linuxthreads/timer_routines.c: Ditto.
-	* libc/sys/linux/linuxthreads/timer_settime.c: Ditto.
-	* libc/sys/linux/linuxthreads/tst-cancel.c: Ditto.
-	* libc/sys/linux/linuxthreads/tst-context.c: Ditto.
-	* libc/sys/linux/linuxthreads/tststack.c: Ditto.
-	* libc/sys/linux/linuxthreads/unload.c: Ditto.
-	* libc/sys/linux/linuxthreads/weaks.c: Ditto.
-	* libc/sys/linux/linuxthreads/wrapsyscall.c: Ditto.
-	* libc/sys/linux/linuxthreads/bits/initspin.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/libc-lock.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/libc-tsd.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/local_lim.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/posix_opt.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/pthreadtypes.h: Ditto.
-	* libc/sys/linux/linuxthreads/bits/sigthread.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/Makefile.am: Ditto.
-	* libc/sys/linux/linuxthreads/machine/Makefile.in: Ditto.
-	* libc/sys/linux/linuxthreads/machine/aclocal.m4: Ditto.
-	* libc/sys/linux/linuxthreads/machine/configure: Ditto.
-	* libc/sys/linux/linuxthreads/machine/configure.in: Ditto.
-	* libc/sys/linux/linuxthreads/machine/generic/generic-sysd: Ditto.ep.h
-	* libc/sys/linux/linuxthreads/machine/i386/Makefile.am: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/Makefile.in: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/aclocal.m4: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/bp-asm.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/clone.S: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/configure: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/configure.in: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/pspinlock.c: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/pt-machine.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/stackinfo.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/sysdep.S: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/sysdep.h: Ditto.
-	* libc/sys/linux/linuxthreads/machine/i386/useldt.h: Ditto.
-	* libc/sys/linux/machine/i386/dl-machine.h: Ditto.
-	* libc/sys/linux/net/Makefile.am: Ditto.
-	* libc/sys/linux/net/Makefile.in: Ditto.
-	* libc/sys/linux/net/addr2ascii.3: Ditto.
-	* libc/sys/linux/net/addr2ascii.c: Ditto.
-	* libc/sys/linux/net/ascii2addr.c: Ditto.
-	* libc/sys/linux/net/base64.c: Ditto.
-	* libc/sys/linux/net/bindresvport.c: Ditto.
-	* libc/sys/linux/net/byteorder.3: Ditto.
-	* libc/sys/linux/net/ether_addr.c: Ditto.
-	* libc/sys/linux/net/ethers.3: Ditto.
-	* libc/sys/linux/net/getaddrinfo.3: Ditto.
-	* libc/sys/linux/net/getaddrinfo.c: Ditto.
-	* libc/sys/linux/net/gethostbydns.c: Ditto.
-	* libc/sys/linux/net/gethostbyht.c: Ditto.
-	* libc/sys/linux/net/gethostbyname.3: Ditto.
-	* libc/sys/linux/net/gethostbynis.c: Ditto.
-	* libc/sys/linux/net/gethostnamadr.c: Ditto.
-	* libc/sys/linux/net/getifaddrs.3: Ditto.
-	* libc/sys/linux/net/getifaddrs.c: Ditto.
-	* libc/sys/linux/net/getipnodebyname.3: Ditto.
-	* libc/sys/linux/net/getnameinfo.3: Ditto.
-	* libc/sys/linux/net/getnameinfo.c: Ditto.
-	* libc/sys/linux/net/getnetbydns.c: Ditto.
-	* libc/sys/linux/net/getnetbyht.c: Ditto.
-	* libc/sys/linux/net/getnetbynis.c: Ditto.
-	* libc/sys/linux/net/getnetent.3: Ditto.
-	* libc/sys/linux/net/getnetnamadr.c: Ditto.
-	* libc/sys/linux/net/getproto.c: Ditto.
-	* libc/sys/linux/net/getprotoent.3: Ditto.
-	* libc/sys/linux/net/getprotoent.c: Ditto.
-	* libc/sys/linux/net/getprotoname.c: Ditto.
-	* libc/sys/linux/net/getservbyname.c: Ditto.
-	* libc/sys/linux/net/getservbyport.c: Ditto.
-	* libc/sys/linux/net/getservent.3: Ditto.
-	* libc/sys/linux/net/getservent.c: Ditto.
-	* libc/sys/linux/net/herror.c: Ditto.
-	* libc/sys/linux/net/hesiod.3: Ditto.
-	* libc/sys/linux/net/hesiod.c: Ditto.
-	* libc/sys/linux/net/if_indextoname.3: Ditto.
-	* libc/sys/linux/net/ifname.c: Ditto.
-	* libc/sys/linux/net/inet.3: Ditto.
-	* libc/sys/linux/net/inet6_option_s: Ditto.pace.3
-	* libc/sys/linux/net/inet6_rthdr_space.3: Ditto.
-	* libc/sys/linux/net/inet_addr.c: Ditto.
-	* libc/sys/linux/net/inet_lnaof.c: Ditto.
-	* libc/sys/linux/net/inet_makeaddr.c: Ditto.
-	* libc/sys/linux/net/inet_net.3: Ditto.
-	* libc/sys/linux/net/inet_net_ntop.c: Ditto.
-	* libc/sys/linux/net/inet_net_pton.c: Ditto.
-	* libc/sys/linux/net/inet_neta.c: Ditto.
-	* libc/sys/linux/net/inet_netof.c: Ditto.
-	* libc/sys/linux/net/inet_network.c: Ditto.
-	* libc/sys/linux/net/inet_ntoa.c: Ditto.
-	* libc/sys/linux/net/inet_ntop.c: Ditto.
-	* libc/sys/linux/net/inet_pton.c: Ditto.
-	* libc/sys/linux/net/innetgr-stub.c: Ditto.
-	* libc/sys/linux/net/ip6opt.c: Ditto.
-	* libc/sys/linux/net/iso_addr.3: Ditto.
-	* libc/sys/linux/net/iso_addr.c: Ditto.
-	* libc/sys/linux/net/issetugid-stub.c: Ditto.
-	* libc/sys/linux/net/linkaddr.3: Ditto.
-	* libc/sys/linux/net/linkaddr.c: Ditto.
-	* libc/sys/linux/net/map_v4v6.c: Ditto.
-	* libc/sys/linux/net/name6.c: Ditto.
-	* libc/sys/linux/net/namespace.h: Ditto.
-	* libc/sys/linux/net/ns.3: Ditto.
-	* libc/sys/linux/net/ns_addr.c: Ditto.
-	* libc/sys/linux/net/ns_name.c: Ditto.
-	* libc/sys/linux/net/ns_netint.c: Ditto.
-	* libc/sys/linux/net/ns_ntoa.c: Ditto.
-	* libc/sys/linux/net/ns_parse.c: Ditto.
-	* libc/sys/linux/net/ns_print.c: Ditto.
-	* libc/sys/linux/net/ns_ttl.c: Ditto.
-	* libc/sys/linux/net/nsap_addr.c: Ditto.
-	* libc/sys/linux/net/nsdispatch.3: Ditto.
-	* libc/sys/linux/net/nsdispatch.c: Ditto.
-	* libc/sys/linux/net/nslexer.c: Ditto.
-	* libc/sys/linux/net/nslexer.l: Ditto.
-	* libc/sys/linux/net/nsparser.c: Ditto.
-	* libc/sys/linux/net/nsparser.h: Ditto.
-	* libc/sys/linux/net/nsparser.y: Ditto.
-	* libc/sys/linux/net/rcmd.3: Ditto.
-	* libc/sys/linux/net/rcmd.c: Ditto.
-	* libc/sys/linux/net/rcmdsh.3: Ditto.
-	* libc/sys/linux/net/rcmdsh.c: Ditto.
-	* libc/sys/linux/net/recv.c: Ditto.
-	* libc/sys/linux/net/res_comp.c: Ditto.
-	* libc/sys/linux/net/res_config.h: Ditto.
-	* libc/sys/linux/net/res_data.c: Ditto.
-	* libc/sys/linux/net/res_debug.c: Ditto.
-	* libc/sys/linux/net/res_init.c: Ditto.
-	* libc/sys/linux/net/res_mkquery.c: Ditto.
-	* libc/sys/linux/net/res_mkupdate.c: Ditto.
-	* libc/sys/linux/net/res_query.c: Ditto.
-	* libc/sys/linux/net/res_send.c: Ditto.
-	* libc/sys/linux/net/res_update.c: Ditto.
-	* libc/sys/linux/net/resolver.3: Ditto.
-	* libc/sys/linux/net/rthdr.c: Ditto.
-	* libc/sys/linux/net/send.c: Ditto.
-	* libc/sys/linux/net/un-namespace.h: Ditto.
-	* libc/sys/linux/net/vars.c: Ditto.
-	* libc/sys/linux/stdlib/COPYRIGHT: Ditto.
-	* libc/sys/linux/stdlib/Makefile.am: Ditto.
-	* libc/sys/linux/stdlib/Makefile.in: Ditto.
-	* libc/sys/linux/stdlib/cclass.h: Ditto.
-	* libc/sys/linux/stdlib/cname.h: Ditto.
-	* libc/sys/linux/stdlib/collate.c: Ditto.
-	* libc/sys/linux/stdlib/collate.h: Ditto.
-	* libc/sys/linux/stdlib/collcmp.c: Ditto.
-	* libc/sys/linux/stdlib/engine.c: Ditto.
-	* libc/sys/linux/stdlib/fnmatch.3: Ditto.
-	* libc/sys/linux/stdlib/fnmatch.c: Ditto.
-	* libc/sys/linux/stdlib/glob.3: Ditto.
-	* libc/sys/linux/stdlib/glob.c: Ditto.
-	* libc/sys/linux/stdlib/reallocf.c: Ditto.
-	* libc/sys/linux/stdlib/regcomp.c: Ditto.
-	* libc/sys/linux/stdlib/regerror.c: Ditto.
-	* libc/sys/linux/stdlib/regex.3: Ditto.
-	* libc/sys/linux/stdlib/regex2.h: Ditto.
-	* libc/sys/linux/stdlib/regexec.c: Ditto.
-	* libc/sys/linux/stdlib/regfree.c: Ditto.
-	* libc/sys/linux/stdlib/utils.h: Ditto.
-	* libc/sys/linux/stdlib/wordexp.c: Ditto.
-	* libc/sys/linux/stdlib/wordfree.c: Ditto.
-	* libc/sys/linux/sys/dlfcn.h: Ditto.
-	* libc/sys/linux/sys/elfclass.h: Ditto.
-	* libc/sys/linux/sys/event.h: Ditto.
-	* libc/sys/linux/sys/ioccom.h: Ditto.
-	* libc/sys/linux/sys/libc-tsd.h: Ditto.
-	* libc/sys/linux/sys/link.h: Ditto.
-	* libc/sys/linux/sys/lock.h: Ditto.
-	* libc/sys/linux/sys/param.h: Ditto.
-	* libc/sys/linux/sys/socket.h: Ditto.
-	* libc/sys/linux/sys/sockio.h: Ditto.
-
-2003-05-28  Dhananjay Deshpande  <dhananjayd@kpitcummins.com> 
-
-	* newlib/libc/machine/h8300/memcpy.S: Use .h8300hn and .h8300sn for 
-	normal mode
-	* newlib/libc/machine/h8300/memset.S: Likewise
-	* newlib/lib/machine/h8300/reg_memcpy.S: Likewise
-	* newlib/lib/machine/h8300/reg_memset.S: Likewise
-	* newlib/lib/machine/h8300/setjmp.S: Likewise
-	* newlib/lib/machine/h8300/strcmp.S: Likewise
-	* newlib/lib/sys/h8300hms/crt0.S: Likewise
-
-2003-05-13  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/ctype/ctype_.c: Remove checks for deprecated __CYGWIN32__.
-	* libc/include/stdio.h: Ditto.
-	* libc/include/sys/config.h: Ditto.
-	* libc/stdio/mktemp.c: Ditto.
-
-2003-05-13  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/locale/ldpart.c (__part_load_locale): Substitute
-	__CYGWIN_USE_BIG_TYPES__ by __USE_INTERNAL_STAT64.
-	* libc/search/hash.c (__hash_open): Ditto.
-	(init_hash): Ditto.
-	* libc/stdio/fseek.c (fseek): Ditto.
-	* libc/stdio/makebuf.c (__smakebuf): Ditto.
-	* libc/stdio/mktemp.c (_gettemp): Ditto.
-
-2003-05-12  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/stdio.h: Change one __CYGWIN__ to __CYGWIN32__.
-
-2003-05-12  Corinna Vinschen  <corinna@vinschen.de>
-
-	* configure.host: Accomodate removing the libc/sys/cygwin dir.
-	* libc/locale/ldpart.c (__part_load_locale): Use 64 bit stat call
-	if __CYGWIN_USE_BIG_TYPES__ is set.
-	* libc/search/hash.c (__hash_open): Ditto.
-	(init_hash): Ditto.
-	* libc/stdio/fseek.c (fseek): Ditto.
-	* libc/stdio/makebuf.c (__smakebuf): Ditto.
-	* libc/stdio/mktemp.c (_gettemp): Ditto.
-	* libc/sys/cygwin/Makefile.am: Remove.
-	* libc/sys/cygwin/Makefile.in: Remove.
-	* libc/sys/cygwin/aclocal.m4: Remove.
-	* libc/sys/cygwin/configure: Remove.
-	* libc/sys/cygwin/configure.in: Remove.
-	* libc/sys/cygwin/crt0.c: Move to winsup/cygwin directory.
-	* libc/sys/cygwin/sys/dirent.h: Move to winsup/cygwin/include/sys
-	directory.
-	* libc/sys/cygwin/sys/param.h: Ditto.
-	* libc/sys/cygwin/sys/utime.h: Ditto.
-	* libc/sys/cygwin/sys/utmp.h: Ditto.
-
-2003-05-11  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/types.h: Don't define key_t for Cygwin.
-
-2003-05-10  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/sys/cygwin/sys/dirent.h (struct dirent): Accommodate (slightly)
-	64 bit inodes.
-
-2003-05-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/config.h: Remove all Cygwin specific configuration.
-	Include cygwin/config.h instead.
-
-2003-04-16  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* newlib/libc/machine/powerpc (ato*fix*.c,strto*fix*.c): Shield
-	all code with #ifdef __SPE__ test.
-	* newlib/libc/machine/powerpc (simdldtoa.c, ufix64toa.c): Ditto.
-
-2003-04-15  Chris January <chris@atomice.net>
-
-	* newlib/libc/include/sys/unistd.h: add declaration for gethostid on
-	Cygwin.
-
-2003-04-09  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/memset.S: Avoid clobbering volatile
-	objects following a tiny to-be-set array in the same quadword.
-
-2001-04-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/wchar.h: Add definitions for wcswidth and wcwidth.  
-	* libc/string/Makefile.am: Add wcswidth.c and wcwidth.c
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/wcswidth.c: New file.
-	* libc/string/wcwidth.c: New file.
-	* libc/string/wcstrings.tex: Add wcswidth and wcwidth.
-
-Thu Apr  3 14:01:16 2003  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/memset.S: Fix problem with alloco region
-	exceeding destination region for length >= 88 bytes, start
-	& 0x16 == 0, end & 0x1f == 18.
-
-2001-04-03  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/string/wcscoll.c: Fix comment.
-
-2001-04-02  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/wchar.h: Add definition for wcscoll.
-	* libc/string/Makefile.am: Add wcscoll.c.
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/wcscoll.c: New file.
-	* libc/string/wcstrings.tex: Add wcscoll.   
-
-2003-04-01  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/stdio/sscanf.c: Update flags description.
-	* libc/stdio/vfscanf.c: Add CHAR flag value to denote 8 bit target
-	type.
-	(__svfscanf_r): Add 'hh' and 'll' handling.
-
-2003-04-01  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/sys/dirent.h (struct DIR): Change type of
-	__d_position member to _off_t.
-
-2003-03-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfscanf.c (__svfscanf_r): For floating point conversion,
-	count all characters used to create number against maximum width.
-	* libc/machine/powerpc/vfscanf.c (__svfscanf_r): Ditto.
-
-2003-03-18  D.Venkatasubramanian  <dvenkat@noida.hcltech.com>
-
-	* libc/include/sys/h8300hms/crt0.S[__SIMULATOR__]: Add commandline
-	support.
-	* configure.host (h8300*-*-*): Added comment regarding -D__SIMULATOR__
-	flag to support simulator only extensions.
-
-2003-03-17  Bob Cassels  <bcassels@abinitio.com>
-
-        * libc/string/wcschr.c: (wcschr): Look for character first, 
-	then for end of string, so you can do wcschr(x, '\0').
-
-2003-03-10  Corinna Vinschen  <corinna@vinschen.de>     
-
-	* libc/include/stdio.h: Declare fgetpos, fsetpos, fseeko and ftello
-	with internal (_fpos_t and _off_t) datatypes when compiling newlib.
-	* libc/include/sys/unistd.h: Declare _lseek using _off_t.
-	* libc/reent/lseekr.c (_lseek_r): Use _off_t instead of off_t.
-	* libc/stdio/fseeko.c (fseeko): Ditto.
-	* libc/stdio/ftello.c (ftello): Ditto.
-	* libc/stdio/stdio.c (__swrite): Ditto.
-	(__sseek): Ditto.
-	* libc/stdio/fgetpos.c (fgetpos): Use _fpos_t instead of fpos_t.
-	* libc/stdio/fseek.c (fseek): Ditto.
-	* libc/stdio/fsetpos.c (fsetpos): Ditto.
-	* libc/stdio/ftell.c (ftell): Ditto.
-	* libc/stdio/local.h: Declare __sseek using _off_t.
-
-2003-03-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/reent/lseekr.c (lseek_r): Use _off_t instead of off_t.
-
-2003-03-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/config.h: Define __CYGWIN_USE_BIG_TYPES__ for
-	Cygwin.
-
-2003-03-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/pwd.h: Add guards to avoid type clashes when compiling
-	Cygwin.
-	* libc/include/sys/stat.h: Ditto.
-	* libc/include/sys/unistd.h: Ditto.
-	* libc/sys/cygwin/sys/dirent.h: Ditto.
-
-2003-03-07  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/unistd.h: Guard getopt.h call to force only
-	declaration of getopt and avoid getopt_long declaration.
-	* libc/sys/cygwin/include/unistd.h: Remove.
-
-2003-03-07  Corinna Vinschen  <corinna@vinschen.de>
-
-	* configure.host: Define stdio64_dir for Cygwin.
-	* libc/include/stdio.h: Change definition of fpos_t to fulfill
-	Cygwin 64bit file access requirements.
-	Drop definition of f*64() functions when compiled for Cygwin.
-	* libc/include/sys/config.h: Define __LARGE64_FILES for Cygwin.
-	* libc/reent/lseek64r.c: Use _off64_t instead of off64_t.
-	* libc/stdio64/local64.h: Use _fpos64_t instead of fpos64_t.
-
-2003-03-07   Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h: Remove extraneous _sig_func
-	declaration.
-
-2003-02-25   D.Venkatasubramanian <dvenkat@noida.hcltech.com>
-
-	* libc/sys/h8300hms/Makefile.am: Add support for new files.
-	* libc/sys/h8300hms/Makefile.in: Regenerated.
-	* libc/sys/h8300hms/close.S: New file.
-	* libc/sys/h8300hms/fstat.S: Ditto.
-	* libc/sys/h8300hms/lseek.S: Ditto.
-	* libc/sys/h8300hms/open.S: Ditto.
-	* libc/sys/h8300hms/stat.S: Ditto.
-	* libc/sys/h8300hms/read.S: New file to replace read.c.
-	* libc/sys/h8300hms/read.c: Removed.
-	* libc/sys/h8300hms/syscalls.c: Removed functions _open,
-	_lseek, _close, _stat, _fstat.
-	* libc/sys/h8300hms/write.S: New file to replace write.c.
-	* libc/sys/h8300hms/write.c: Removed.
-
-2003-02-20  Nick Clifton  <nickc@redhat.com>
-
-	* Add support for Cirrus Maverick ARM co-processor:
-	
-	2000-09-13  Aldy Hernandez  <aldyh@redhat.com>
-
-		* libc/include/machine/ieeefp.h: Set IEEE_BIG_ENDIAN or
-		IEEE_LITTLE_ENDIAN depending on endian mode (cirrus).
-
-	2000-08-11  Aldy Hernandez  <aldyh@redhat.com>
-
-		* configure.host: set sys_dir, syscall_dir, and
-		newlib_cflags for ep9312 host.
-
-        * configure.host: Restore alpha sorting of entries in case
-	statements.
-
-2003-02-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/stdlib/mallocr.c (unlink): Revert 02/18 fix.
-
-2003-02-18  Christian Groessler  <chris@groessler.org>
-
-	* libc/machine/z8k/setjmp.S (_setjmp / _longjmp): Fix to
-	support z8001 segmented mode.
-
-2003-02-18  Earnie Boyd  <earnie@users.sf.net>
-
-	* libc/stdlib/mallocr.c (unlink): Don't assign a value to a pointer
-	with a NULL value.
-
-2003-02-10  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/types.h: Don't define __MS_types__ for Cygwin.
-	Don't define some types under cygwin.
-
-2003-02-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* acinclude.m4 (--disable-newlib-supplied-syscalls): New configuration 
-	option to allow disabling of syscalls being supplied in newlib.
-	* aclocal.m4: Regenerated.
-	* configure: Ditto.
-	* configure.host: Add support of new configuration option and add
-	-D__NO_SYSCALLS__ if newlib supplied syscalls are disabled.
-	* doc/aclocal.m4: Regenerated.
-	* doc/configure: Ditto.
-	* libc/*aclocal.m4: Ditto.
-	* libc/*configure: Ditto.
-	* libm/*aclocal.m4: Ditto.
-	* libm/*configure: Ditto.
-	* libc/sys/arm/Makefile.am: Don't build syscalls.o if new option
-	is disabled.
-	* libc/sys/arm/Makefile.in: Regenerated.
-
-2003-02-05  Jonathan Larmour  <jifl@eCosCentric.com>
-
-	* libc/stdio/vsprintf.c (vsprintf, _vsprintf_r): Set _file fd to
-	-1 to be sure it cannot later match a valid file fd causing
-	isatty() to return 1.
-	* libc/stdio/asprintf.c (asprintf, _asprintf_r): Ditto.
-	* libc/stdio/sprintf.c (sprintf, _sprintf_r): Ditto.
-	* libc/stdio/vasprintf.c (vasprintf, _vasprintf_r): Ditto.
-
-2003-02-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/ldtoa.c (_ldtoa_r): Fix code to allocate the format
-	buffer based on the precision, after we have processed the input value 
-	in a local buffer and know its relative magnitude. 
-
-2003-01-31  Michael Snyder  <msnyder@redhat.com>
-
-	* libc/sys/h8300hms/_exit.c (_exit, __exit):  Slip a magic cookie
-	into registers r1 and r2, so that the simulator can distinguish
-	this trap from a breakpoint trap.  Copied from libgloss.
-
-2003-01-31  Michael Snyder  <msnyder@redhat.com>
-
-	* libc/sys/h8300hms/crt0.S (_start): Change local label
-	from .loop to .Loop, so that ld and gdb will ignore it.
-
-2003-01-29  Jason Tishler  <jason@tishler.net>
-
-	* libc/include/time.h: Declare nanosleep() under Cygwin.
-
-2003-01-24  Nick Clifton  <nickc@redhat.com>
-
-	* Add sh2e support:
-
-	2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
-
-		* libc/machine/sh/asm.h: Added __SH2E__ next to __SH3E__.
-		* libc/machine/sh/setjmp.S: Likewise.
-		* libc/include/machine/ieeefp.h: Likewise.
-
-2003-01-24  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/unistd.h: Add setregid and setreuid declarations
-	for Cygwin.
-
-2003-01-21 Anita Kulkarni  <anitak@kpit.com>
-  
-	* libc/time/difftime.c : Typecast the result to double.
-
-2003-01-20  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/unistd.h: Add rresvport declaration for cygwin.
-
-2003-01-18  Nick Clifton  <nickc@redhat.com>
-
-	* libc/include/machine/ieeefp.h : Define __IEEE_BIG_ENDIAN,
-	__SMALL_BITFIELDS and _DOUBLE_IS_32BITS for IP2K.
-
-2003-01-16  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/sys/rtems/include/limits.h, libc/sys/rtems/sys/param.h,
-        libc/sys/rtems/sys/syslimits.h: Update to be in sync with what 
-        constants are defined in each file in the shared versions in
-        libc/include.
-        * libc/sys/rtems/crt0.c: Define extra symbols on SH and HP-PA to
-        autoconf can link programs.
-        * libc/include/machine/types.h: Explicitly specify signed on
-        intXX_t types to ensure they are signed.
-
-2003-01-14  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/time/strftime.c (strftime): Add '%h' and '%l, %k' GNU
-	extensions.
-
-2003-01-08  Richard Sandiford  <rsandifo@redhat.com>
-
-	* configure.host (mips64vr-elf, mips64vrel-elf): New config.
-
-2003-01-07  Charles Wilson  <cwilson@ece.gatech.edu>
-
-	* libc/stdio/sprintf.c: fix typo
-	* libc/stdio/vfprintf.c: fix typo
-
-2003-01-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Support long double I/O for x86-linux.
-	* libc/stdlib/ldtoa.c (_ldtoa_r): Fix code to allocate a buffer
-	large enough to hold formatted result.
-	* libc/machine/powerpc/simdldtoa.c (_simdldtoa_r): Ditto.
-
-2003-01-06  Charles Wilson  <cwilson@ece.gatech.edu>
-
-	* Makefile.am: Add vasprintf.
-	* Makefile.in: Regenerated.
-
-2003-01-06  Charles Wilson  <cwilson@ece.gatech.edu>
-
-	* asprintf.c (_asprintf_r): insure both declarations
-	are the same.
-
-2002-12-28  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/unistd.h: Under cygwin, just include getopt.h rather
-	than defining getopt directly.
-
-2002-12-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* NEWS: Update with 1.11.0 info.
-	* README: Ditto.
-	* acinclude.m4: Change version number to 1.11.0.
-	* aclocal.m4: Regenerated.
-	* configure: Ditto.
-	* doc/aclocal.m4: Ditto.
-	* doc/configure: Ditto.
-	* libc/*/aclocal.m4: Ditto.
-	* libc/*/configure: Ditto.
-	* libc/libc.texinfo: Ditto.
-	* libm/*/aclocal.m4: Ditto.
-	* libm/*/configure: Ditto.
-	* libm/libm.texinfo: Ditto.
-	* libc/sys/linux/shared.ld: Add VERS_1.11.
-
-2002-12-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/i386/f_atan2.S: Change copyright from Cygnus
-	Solutions to Red Hat Inc.
-	* libc/machine/i386/f_atan2f.S: Ditto.
-	* libc/machine/i386/f_exp.c: Ditto.
-	* libc/machine/i386/f_expf.c: Ditto.
-	* libc/machine/i386/f_frexp.S: Ditto.
-	* libc/machine/i386/f_frexpf.S: Ditto.
-	* libc/machine/i386/f_ldexp.S: Ditto.
-	* libc/machine/i386/f_ldexpf.S: Ditto.
-	* libc/machine/i386/f_log.S: Ditto.
-	* libc/machine/i386/f_log10.S: Ditto.
-	* libc/machine/i386/f_log10f.S: Ditto.
-	* libc/machine/i386/f_logf.S: Ditto.
-	* libc/machine/i386/f_pow.c: Ditto.
-	* libc/machine/i386/f_powf.c: Ditto.
-	* libc/machine/i386/f_tan.S: Ditto.
-	* libc/machine/i386/f_tanf.S: Ditto.
-	* libc/machine/i386/memchr.S: Ditto.
-	* libc/machine/i386/memcmp.S: Ditto.
-	* libc/machine/i386/memcpy.S: Ditto.
-	* libc/machine/i386/memmove.S: Ditto.
-	* libc/machine/i386/memset.S: Ditto.
-	* libc/machine/i386/strchr.S: Ditto.
-	* libc/machine/i386/strlen.S: Ditto.
-	* libm/machine/i386/f_atan2.S: Ditto.
-	* libm/machine/i386/f_atan2f.S: Ditto.
-	* libm/machine/i386/f_exp.c: Ditto.
-	* libm/machine/i386/f_expf.c: Ditto.
-	* libm/machine/i386/f_frexp.S: Ditto.
-	* libm/machine/i386/f_frexpf.S: Ditto.
-	* libm/machine/i386/f_ldexp.S: Ditto.
-	* libm/machine/i386/f_ldexpf.S: Ditto.
-	* libm/machine/i386/f_log.S: Ditto.
-	* libm/machine/i386/f_log10.S: Ditto.
-	* libm/machine/i386/f_log10f.S: Ditto.
-	* libm/machine/i386/f_logf.S: Ditto.
-	* libm/machine/i386/f_pow.c: Ditto.
-	* libm/machine/i386/f_powf.c: Ditto.
-	* libm/machine/i386/f_tan.S: Ditto.
-	* libm/machine/i386/f_tanf.S: Ditto.
-
-2002-12-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/environ.c: Update license to Red Hat.
-	* libc/machine/hppa/setjmp.S: Ditto.
-	* libm/test/Makefile.in: Ditto.
-
-2002-12-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Remove references to go32.
-	* libc/sys/go32/*: Removed.
-
-2002-12-16  Kazu Hirata  <kazu@cs.umass.edu>
-
-	* libc/include/sys/config.h: Change setting of INT_MAX
-	and UINT_MAX, to use __INT_MAX__ for __H8300__, __H8300H__,
-	__H8300S__.  Also consolidate flag settings for these
-	platforms.
-
-2002-12-10  Joel Sherrill  <joel@OARcorp.com>
-
-	* libc/include/machine/setjmp.h: Make sure _JBLEN is defined
-	for i386-rtems targets.
-
-2002-12-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h (strtof): New prototype (from C99).
-	(strtodf): Changed from prototype to macro which redefines
-	to strtof.
-	* libc/stdlib/atof.c: Change documentation to refer to strtof
-	instead of strtodf.
-	* libc/stdlib/atoff.c (atoff): Change to call strtof instead of
-	strtodf.
-	* libc/stdlib/strtod.c (strtodf): Renamed to strtof.
-	(strtof): New function.
-	* libm/test/convert.c (test_strtodf): Renamed to test_strtof which
-	calls strtof.
-
-2002-11-27  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/string/memset.c (memset): Fix comment.
-
-2002-11-26  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/string/memset.c (memset): Move initialization of 'd' earlier in
-	function.
-
-2002-11-25  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/string/memset.c (memset): Minor optimization: Use new 'd'
-	variable, introduced below, everywhere.
-
-2002-11-25  Kazu Hirata  <kazu@cs.umass.edu>
-
-	* libc/string/memset.c (memset): Make it safe even if
-	sizeof (int) = 2.
-
-2002-11-22  Joe Buehler  <jbuehler@hekimian.com>
-
-	* configure.in: Change check for libc/include in ${CC} to
-	use an intermediate value so as to work with different shells.
-	* configure: Regenerated.
-	* Makefile.in: Ditto.
-
-2002-11-22  Vijay L. Khuspe  <vijayk1@kpit.com>
-
-	* libc/sys/h8300hms/read.c: Add support for normal mode
-	architecture.
-
-2002-11-20  Ryo Tsuruta  <ryo@kitanet.ne.jp>
-
-	* libc/machine/h8300/setjmp.S (setjmp, longjmp): Combine common
-	code for __H8300H__ and __H8300S__.  Also return 32-bit return code
-	when -mint32 is used.
-
-2002-11-18  Nick Clifton  <nickc@redhat.com>
-
-	* libc/sys/arm/crt0.S: Add NULL to end of argv array.
-
-2002-11-14  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * testsuite/lib/passfail.exp (newlib_pass_fail): Changed to
-        only issue one pass/fail message for a compile/link/execute.
-        * testsuite/newlib.elix/elix.exp: New file.
-        * testsuite/newlib.elix/tmmap.c: Ditto.
-
-2002-11-06  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdlib/malign.c: Don't compile if MALLOC_PROVIDED.
-	* libc/stdlib/mlock.c: Ditto.
-	* libc/stdlib/msize.c: Ditto.
-	* libc/stdlib/msize.c: Ditto.
-	* libc/stdlib/mtrim.c: Ditto.
-	* libc/stdlib/valloc.c: Ditto.
-
-2002-11-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/stdlib/ldtoa.c (e64toe): When checking the exponent
-        for inf/nan, make sure that the check ignores the sign bit.
-
-2002-11-07  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/sys/rtems/machine: New directory.
-        * libc/sys/rtems/machine/limits.h, libc/sys/rtems/machine/param.h,
-        libc/sys/rtems/sys/param.h, libc/sys/rtems/sys/syslimits.h,
-        libc/sys/rtems/sys/utime.h: New files added to make *-rtems newlib
-        targets more BSD like when installed without requiring files to
-        be overwritten at install point when RTEMS itself is installed.
-        * Makefile.am: Pick up system dependent machine .h files such as
-        might be found on a BSD-ish system.
-        * Makefile.in: Regenerate.
-        * libc/include/machine/types.h: When on an RTEMS target, define a
-        few BSD flavor types. 
-
-2002-11-06  Sergey Okhapkin  <sos@prospect.com.ru>
-
-	* include/utmp.h: Define WTMP_FILE.  Define and use UT_IDLEN.
-
-2002-11-06  Kazuhiro Fujieda  <fujieda@jaist.ac.jp>
-
-        * libc/include/wchar.h: Use _{BEGIN,END}_STD_C instead of extern "C".
-        * libc/include/wctype.h: Ditto.
-
-2002-11-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/wchar.h: Add extern "C" specifier if C++.
-        * libc/include/wctype.h: Ditto.
-
-2002-10-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * testsuite/newlib.wctype/tiswctype.c: New test case.
-        * testsuite/newlib.wctype/twctrans.c: Ditto.
-
-2002-10-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/machine/i386/include/endian.h: New file.
-        * libc/sys/linux/machine/i386/include/param.h: Ditto.
-
-2002-10-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libm/machine/i386/aclocal.m4: Regenerated.
-	* libm/machine/i386/configure: Ditto.
-
-2002-10-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * testsuite/include/check.h: New header file to use with
-        test cases.
-        * testsuite/lib/newlib.exp: Add testsuite/include directory
-        to list of header files to use.
-        * testsuite/newlib.wctype/twctype.c: New test case for iswctype fns.
-        * testsuite/newlib.wctype/wctype.exp: New file.
-
-2002-10-11  Graham Stott  <graham.stott@btinternet.com>
-	    Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/include/sys/config.h (SIZE_T_SMALLER_THAN_LONG): Undefine.
-	* libc/stdlib/mallocr.c (long_sub_size_t): Define in a way that
-	doesn't require the SIZE_T_SMALLER_THAN_LONG macro.
-
-2002-10-07	Joel Sherrill <joel@OARcorp.com>
-
-	* libc/sys/rtems/crt0.c: Add even more symbols so gcc() can link
-	dummy programs.
-
-2002-10-07	Joel Sherrill <joel@OARcorp.com>
-
-	* libc/include/pthread.h: Define PTHREAD_CANCELED.
-
-2002-10-07	Joel Sherrill <joel@OARcorp.com>
-
-	* libc/machine/hppa/DEFS.h, libc/machine/hppa/pcc_prefix.s,
-	libc/machine/hppa/setjmp.S, libc/machine/hppa/DEFS.h: Make this
-	compile with current GNU tools.
-
-2002-10-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Add EXTRA_DIRS to allow future dependencies on
-	the build library.
-	* configure.in: Ditto.
-	* Makefile.in: Regenerated.
-	* configure: Ditto.
-	* libc/sys/linux/Makefile.am: Add EXTRA_SUBDIRS and EXTRA_SUBLIBS
-	for specifying configured libraries/directories.
-	* libc/sys/linux/configure.in: Ditto.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/configure: Ditto.
-
-2002-10-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/reent.h: Update documentation at start of file.
-
-2002-09-27  Jim Wilson  <wilson@redhat.com>
-
-	* libc/sys/sysnecv850/crt0.S (start): Delete v850 code for initializing
-	the ctbp register.
-
-2002-09-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/ctype/jp2uc.c: Change to use multiple arrays in jp2uc.h.
-	Also convert to EUCJP before using arrays.  For values not in
-	the conversion arrays, return WEOF.
-	* libc/ctype/jp2uc.h: Change from one array to a number of
-	arrays to account for the fact that the originating table
-	is not contiguous for the input values since some are invalid.
-
-2002-09-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/time/ctime.c: Fix prototype documentation.
-
-2002-09-24  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/errno.h: Add EOVERFLOW.
-
-2002-09-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/wctype.h: New file.
-
-2002-09-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/ctype/Makefile.am: Add new files.
-        * libc/ctype/Makefile.in: Regenerated.
-        * libc/ctype/ctype.tex: Add new iswxxxx, towxxxx, wctype,
-        and wctrans functions to documentation index.
-        * libc/ctype/iswalnum.c: New file.
-        * libc/ctype/iswalpha.c: Ditto.
-        * libc/ctype/iswblank.c: Ditto.
-        * libc/ctype/iswcntrl.c: Ditto.
-        * libc/ctype/iswctype.c: Ditto.
-        * libc/ctype/iswdigit.c: Ditto.
-        * libc/ctype/iswgraph.c: Ditto.
-        * libc/ctype/iswlower.c: Ditto.
-        * libc/ctype/iswprint.c: Ditto.
-        * libc/ctype/iswpunct.c: Ditto.
-        * libc/ctype/iswspace.c: Ditto.
-        * libc/ctype/iswupper.c: Ditto.
-        * libc/ctype/iswxdigit.c: Ditto.
-        * libc/ctype/jp2uc.c: Ditto.
-        * libc/ctype/jp2uc.h: Ditto.
-        * libc/ctype/local.h: Ditto.
-        * libc/ctype/towctrans.c: Ditto.
-        * libc/ctype/towlower.c: Ditto.
-        * libc/ctype/towupper.c: Ditto.
-        * libc/ctype/utf8alpha.h: Ditto.
-        * libc/ctype/utf8print.h: Ditto.
-        * libc/ctype/utf8punct.h: Ditto.
-        * libc/ctype/wctrans.c: Ditto.
-        * libc/ctype/wctype.c: Ditto.
-        * libc/locale/locale.c (__lc_ctype): New external array to
-        replace static lc_ctype array.
-        * libc/stdlib/mbtowc_r.c: Use __lc_ctype to check current lc_ctype
-        rather than reentrancy structure's _current_locale field.
-        * libc/stdlib/wctomb_r.c: Ditto.
-
-2002-09-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Minor comment and formatting changes.
-	* libc/Makefile.am: Add libc_la_DEPENDENCIES.
-	* libc/Makefile.in: Regenerated.
-	* libc/include/sys/config.h: Minor format change.
-
-2002-09-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/syscalls/sysfcntl.c (fcntl): Fix typo in preprocessor
-	statement comment.
-
-2002-09-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/posix/opendir.c (opendir): Change code to check
-	for HAVE_FCNTL before calling fcntl.
-	* libc/search/hash.c (hash_open): Ditto.
-	* libc/search/hash_page.c (open_tmp): Ditto.
-	* libc/reent/Makefile.am: Add fcntlr.c.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/reent/fcntlr.c: New file.
-	* libc/stdio/fdopen.c (_fdopen_r): Change to call _fcntl_r
-	instead of _fcntl when HAVE_FCNTL flag is set.
-	* libc/syscalls/sysfcntl.c (fcntl): Check for HAVE_FCNTL flag
-	to see if _fcntl or _fcntl_r should be called.  If flag is not
-	set, default to ENOSYS stub.
-
-2002-09-16  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/wchar.h (mbstate_t): Change protective flag to
-	be _MBSTATE_T.
-	* libc/include/sys/_types.h (_mbstate_t): Remove protective flag.
-	[__CYGWIN__]: Remove special code that defines mbstate_t and WEOF
-	for Cygwin.
-	* libc/sys/linux/sys/_types.h (_mbstate_t): Remove protective flag.
-
-2002-09-11  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * acinclude.m4 (enable-newlib-mb): Change check to
-        default newlib_mb variable to empty string rather than "no".
-        * configure.host: Remove hard-coding of -DMB_CAPABLE for
-        x86-linux and Cygwin.  Add code to check for newlib_mb
-        being unset in which case set to "yes" for x86-linux and
-        Cygwin.  Change check for newlib_mb being "yes" to allow
-        for an empty string.
-        * configure.in (_MB_LEN_MAX): New AC_DEFINE.
-        * newlib.hin (_MB_LEN_MAX): New define to configure.
-        * aclocal.m4: Regenerated.
-        * configure: Ditto.
-        * libc/include/limits.h: New file.
-        * libc/sys/linux/include/limits.h: Ditto.
-        * doc/aclocal.m4 doc/configure libc/aclocal.m4
-          libc/configure libc/include/%redact libc/machine/aclocal.m4
-          libc/machine/configure libc/machine/a29k/aclocal.m4
-          libc/machine/a29k/configure libc/machine/arm/aclocal.m4
-          libc/machine/arm/configure libc/machine/d10v/aclocal.m4
-          libc/machine/d10v/configure libc/machine/d30v/aclocal.m4
-          libc/machine/d30v/configure libc/machine/fr30/aclocal.m4
-          libc/machine/fr30/configure libc/machine/frv/aclocal.m4
-          libc/machine/frv/configure libc/machine/h8300/aclocal.m4
-          libc/machine/h8300/configure libc/machine/h8500/aclocal.m4
-          libc/machine/h8500/configure libc/machine/hppa/aclocal.m4
-          libc/machine/hppa/configure libc/machine/i386/aclocal.m4
-          libc/machine/i386/configure libc/machine/i960/aclocal.m4
-          libc/machine/i960/configure libc/machine/m32r/aclocal.m4
-          libc/machine/m32r/configure libc/machine/m68hc11/aclocal.m4
-          libc/machine/m68hc11/configure libc/machine/m68k/aclocal.m4
-          libc/machine/m68k/configure libc/machine/m88k/aclocal.m4
-          libc/machine/m88k/configure libc/machine/mips/aclocal.m4
-          libc/machine/mips/configure libc/machine/mn10200/aclocal.m4
-          libc/machine/mn10200/configure libc/machine/mn10300/aclocal.m4
-          libc/machine/mn10300/configure libc/machine/necv70/aclocal.m4
-          libc/machine/necv70/configure libc/machine/powerpc/aclocal.m4
-          libc/machine/powerpc/configure libc/machine/sh/aclocal.m4
-          libc/machine/sh/configure libc/machine/sparc/aclocal.m4
-          libc/machine/sparc/configure libc/machine/tic80/aclocal.m4
-          libc/machine/tic80/configure libc/machine/v850/aclocal.m4
-          libc/machine/v850/configure libc/machine/w65/aclocal.m4
-          libc/machine/w65/configure libc/machine/xscale/aclocal.m4
-          libc/machine/xscale/configure
-          libc/machine/xstormy16/aclocal.m4
-          libc/machine/xstormy16/configure libc/machine/z8k/aclocal.m4
-          libc/machine/z8k/configure libc/sys/aclocal.m4
-          libc/sys/configure libc/sys/a29khif/aclocal.m4
-          libc/sys/a29khif/configure libc/sys/arc/aclocal.m4
-          libc/sys/arc/configure libc/sys/arm/aclocal.m4
-          libc/sys/arm/configure libc/sys/cygwin/aclocal.m4
-          libc/sys/cygwin/configure libc/sys/d10v/aclocal.m4
-          libc/sys/d10v/configure libc/sys/decstation/aclocal.m4
-          libc/sys/decstation/configure libc/sys/go32/aclocal.m4
-          libc/sys/go32/configure libc/sys/h8300hms/aclocal.m4
-          libc/sys/h8300hms/configure libc/sys/h8500hms/aclocal.m4
-          libc/sys/h8500hms/configure libc/sys/idt/aclocal.m4
-          libc/sys/idt/configure libc/sys/linux/aclocal.m4
-          libc/sys/linux/configure libc/sys/linux/include/%redact
-          libc/sys/linux/machine/aclocal.m4
-          libc/sys/linux/machine/configure
-          libc/sys/linux/machine/i386/aclocal.m4
-          libc/sys/linux/machine/i386/configure
-          libc/sys/m88kbug/aclocal.m4 libc/sys/m88kbug/configure
-          libc/sys/mmixware/aclocal.m4 libc/sys/mmixware/configure
-          libc/sys/netware/aclocal.m4 libc/sys/netware/configure
-          libc/sys/rtems/aclocal.m4 libc/sys/rtems/configure
-          libc/sys/sh/aclocal.m4 libc/sys/sh/configure
-          libc/sys/sparc64/aclocal.m4 libc/sys/sparc64/configure
-          libc/sys/sun4/aclocal.m4 libc/sys/sun4/configure
-          libc/sys/sysmec/aclocal.m4 libc/sys/sysmec/configure
-          libc/sys/sysnec810/aclocal.m4 libc/sys/sysnec810/configure
-          libc/sys/sysnecv850/aclocal.m4 libc/sys/sysnecv850/configure
-          libc/sys/sysvi386/aclocal.m4 libc/sys/sysvi386/configure
-          libc/sys/sysvnecv70/aclocal.m4 libc/sys/sysvnecv70/configure
-          libc/sys/tic80/aclocal.m4 libc/sys/tic80/configure
-          libc/sys/w65/aclocal.m4 libc/sys/w65/configure
-          libc/sys/z8ksim/aclocal.m4 libc/sys/z8ksim/configure
-          libm/aclocal.m4 libm/configure: Regenerated.
-
-2002-09-09  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/machine/i386/crt0.c (_start): Remove
-        code that clears the .bss section.
-
-2002-09-09  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/_types.h (_mbstate_t): Changed to use
-        unsigned char internally.
-        * libc/sys/linux/sys/_types.h: Ditto.
-        * libc/include/sys/reent.h
-        * libc/stdlib/mblen.c (mblen): Use function-specific state
-        value from default reentrancy structure.
-        * libc/stdlib/mblen_r.c (_mblen_r):  If return code from
-        _mbtowc_r is less than 0, reset state __count value and
-        return -1.
-        * libc/stdlib/mbrlen.c (mbrlen): If the input state pointer
-        is NULL, use the function-specific pointer provided in the
-        default reentrancy structure.
-        * libc/stdlib/mbrtowc.c: Add reentrant form of function.
-        If input state pointer is NULL, use function-specific area
-        provided in reentrancy structure.
-        * libc/stdlib/mbsrtowcs.c: Ditto.
-        * libc/stdlib/wcrtomb.c: Ditto.
-        * libc/stdlib/wcsrtombs.c: Ditto.
-        * libc/stdlib/mbstowcs.c: Reformat.
-        * libc/stdlib/wcstombs.c: Ditto.
-        * libc/stdlib/mbstowcs_r.c (_mbstowcs_r): If an error occurs,
-        reset the state's __count value and return -1.
-        * libc/stdlib/mbtowc.c: Ditto.
-        * libc/stdlib/mbtowc_r.c (_mbtowc_r): Add restartable functionality.
-        If number of bytes is used up before completing a valid multibyte
-        character, return -2 and save the state.
-        * libc/stdlib/wctomb_r.c (_wctomb_r): Define __state as __count
-        and change some __count references to __state for clarity.
-
-2002-09-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/config.h (MB_LEN_MAX): Removed as this
-	is defined by <limits.h>.
-
-2002-09-05  Kazuhiro Fujieda  <fujieda@jaist.ac.jp>
-
-	* libc/include/wchar.h (WCHAR_MAX): Only define if not already
-	defined.
-
-2002-09-04  Kazuhiro Fujieda  <fujieda@jaist.ac.jp>
-
-        * libc/include/sys/config.h: Define accordingly __WCHAR_MAX__.
-        * libc/include/wchar.h: Define WCHAR_MIN as 0 and WCHAR_MAX as
-        __WCHAR_MAX__ or 0x7fffffffu.
-        * libc/string/wcscmp.c: Delete wrong and unnecessary type cast.
-        * libc/string/wcsncmp.c: Ditto.
-
-2002-09-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/string/wcschr.c: Add include of <stddef.h>.
-	* libc/string/wcspbrk.c: Ditto.
-	* libc/string/wcsrchr.c: Ditto.
-	* libc/string/wcsstr.c: Ditto.
-
-2002-09-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/_types.h (_flock_t): Added.
-        * libc/include/sys/lock.h (__lock_try_acquire): New interface.
-        (__lock_try_acquire_recursive): Ditto.
-        * libc/include/sys/reent.h (__sFILE, __sFILE64): Add new
-        _lock field.
-        * libc/stdio/findfp.c (std)[!__SINGLE_THREAD__]: Initialize _lock
-        field.
-        * libc/stdio/fopen.c (_fopen_r)[!__SINGLE_THREAD__]: Ditto.
-        * libc/stdio64/fopen64.c (_fopen64_r)[!__SINGLE_THREAD__]: Ditto.
-        * libc/sys/linux/include/time.h (struct timespec): Moved from
-        <sys/types.h> and added check for __need_timespec flag so type
-        can be defined by itself.
-        * libc/sys/linux/sys/_types.h (_flock_t): New type.
-        * libc/sys/linux/sys/types.h (struct timespec): Moved to
-        <time.h>.
-
-2002-08-29  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/sys/linux/argp: New directory.
-	* libc/sys/linux/getopt.c: New file.
-	* libc/sys/linux/getopt1.c: New file.
-	* libc/sys/linux/getoptlong.c: Remove file.
-	* libc/sys/linux/include/argp.h: New file.
-	* libc/sys/linux/Makefile.am: Define argp_dir and ARGP_LIB,
-	based on ELIX level.
-	(SUBDIRS): Add argp_dir.
-	(SUBLIBS): Add ARGP_LIB.
-	(ELIX_2_OBJS): Add getopt.$(oext), getopt1.$(oext), remove
-	getopt_long.$(oext).
-	* libc/sys/linux/configure.in (AC_OUTPUT): Add argp/Makefile.
-
-2002-08-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/libc.texinfo: Add node reference to wide-character strings.
-        * libc/string/wcstrings.tex: New file.
-	* libc/string/strtok_r.c: Remove outdated advertising clause.
-        * libc/string/Makefile.am (doc): Add wide-character string
-        chapter to documentation.
-        * libc/string/Makefile.in: Regenerated.
-
-2002-08-29  Kazuhiro Fujieda  <fujieda@jaist.ac.jp>
-
-        * libc/include/wchar.h: Define NULL. Define WEOF more general
-        way. Declare functions in newlib manner.
-        * libc/stdlib/Makefile.am: Delete wmem*.c
-        * libc/stdlib/Makefile.in: Regenerated.
-        * libc/stdlib/wmemchr.c: Delete.
-        * libc/stdlib/wmemcmp.c: Ditto.
-        * libc/stdlib/wmemcpy.c: Ditto.
-        * libc/stdlib/wmemmove.c: Ditto.
-        * libc/stdlib/wmemset.c: Ditto.
-        * libc/string/Makefile.am: Add wmem*.c and wcs*.c.
-        * libc/string/Makefile.in: Regenerated.
-        * libc/string/wcscat.c: New file derived from the NetBSD C Library.
-        * libc/string/wcschr.c: Ditto.
-        * libc/string/wcscmp.c: Ditto.
-        * libc/string/wcscpy.c: Ditto.
-        * libc/string/wcscspn.c: Ditto.
-        * libc/string/wcslcat.c: Ditto.
-        * libc/string/wcslcpy.c: Ditto.
-        * libc/string/wcslen.c: Ditto.
-        * libc/string/wcsncat.c: Ditto.
-        * libc/string/wcsncmp.c: Ditto.
-        * libc/string/wcsncpy.c: Ditto.
-        * libc/string/wcspbrk.c: Ditto.
-        * libc/string/wcsrchr.c: Ditto.
-        * libc/string/wcsspn.c: Ditto.
-        * libc/string/wcsstr.c: Ditto.
-        * libc/string/wmemchr.c: Ditto.
-        * libc/string/wmemcmp.c: Ditto.
-        * libc/string/wmemcpy.c: Ditto.
-        * libc/string/wmemmove.c: Ditto.
-        * libc/string/wmemset.c: Ditto.
-
-2002-08-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/locale/locale.c (_setlocale_r)[MB_CAPABLE]: Fix so
-        default locale "" is accepted for LC_CTYPE or LC_MESSAGES
-        and is treated as if "C" was specified.
-
-2002-08-28  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * Makefile.am (install-data-local): Move install of build
-        newlib.h after installing headers in libc/include so as to
-        overwrite default newlib.h.
-        * Makefile.in: Regenerated.
-
-2002-08-28  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/newlib.h: New file for tools that use newlib
-        headers but don't build newlib first (e.g. gcc).
-
-2002-08-28  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/wmemchr.c: Explicitly include <_ansi.h>.
-	* libc/stdlib/wmemcmp.c: Ditto.
-	* libc/stdlib/wmemcpy.c: Ditto.
-	* libc/stdlib/wmemmove.c: Ditto.
-	* libc/stdlib/wmemset.c: Ditto.
-
-2002-08-27  Egor Duda  <deo@logos-m.ru>
-
-	* libc/stdlib/wmemchr.c: New file.
-	* libc/stdlib/wmemcmp.c: Ditto.
-	* libc/stdlib/wmemcpy.c: Ditto.
-	* libc/stdlib/wmemmove.c: Ditto.
-	* libc/stdlib/wmemset.c: Ditto.
-	* libc/stdlib/Makefile.am (GENERAL_SOURCES): Add new files.
-	* configure.host: Default -DMB_CAPABLE for cygwin.
-	* libc/include/wchar.h: Declare wmemchr(), wmemcmp(), wmemcpy(),
-	wmemmove() and wmemset().  Add include of <_ansi.h>.
-	* libc/stdlib/Makefile.in: Regenerate.
-
-2002-08-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Remove _ELIX_LEVEL flag setting.
-	* Makefile.am(stmp-targ-include): Copy newlib.h to targ-include.
-	(install-data-local): Install newlib.h.
-	* Makefile.in: Regenerated.
-	* aclocal.m4: Ditto.
-	* configure: Ditto.
-	* configure.in: Add AM_CONFIG_HEADER to generate newlib.h based on 
-	newlib.hin.  Add AC_DEFINE_UNQUOTED entries for _ELIX_LEVEL
-	and _NEWLIB_VERSION to fill in newlib.h header file entries.
-	In AC_OUTPUT statement, unset ac_file so multilib support does
-	not use last ac_file temporary used in newlib.h configuration.
-	* libc/include/_ansi.h: Include <newlib.h>.
-	* newlib.hin: New template file for newlib.h.
-	* stamp-h.in: New file.
-
-2002-08-26  Wu Yongwei <adah@netstd.com>
-
-        * time.h (timezonevar): Change "#if" to "#ifdef".
-
-2002-08-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am(LIBC_OBJECTLISTS): Add STDIO64_OBJECTLIST.
-	* Makefile.in: Regenerated.
-	* acinclude.m4: Add support for --enable-newlib-elix-level option.
-	* aclocal.m4: Regenerated.
-	* configure: Ditto.
-	* configure.host: Add code to define _ELIX_LEVEL if
-	--enable-newlib-elix-level option is used.
-	* configure.in: 
-	* libc/aclocal.m4: Regenerated.
-	* libc/configure: Ditto.
-	* libc/argz/Makefile.am: Add EL/IX level checking.
-	* libc/argz/Makefile.in: Regenerated.
-	* libc/argz/dummy.c: New file.
-	* libc/ctype/Makefile.am: Add EL/IX level checking.
-	* libc/ctype/Makefile.in: Regenerated.
-	* libc/locale/Makefile.am: Add EL/IX level checking.
-	* libc/locale/Makefile.in: Regenerated.
-	* libc/posix/Makefile.am: Add EL/IX level checking.
-	* libc/posix/Makefile.in: Regenerated.
-	* libc/posix/telldir.c: Add EL/IX level checking.
-	* libc/reent/Makefile.am: Ditto.
-	* libc/reent/fstat64r.c: Ditto.
-	* libc/reent/lseek64r.c: Ditto.
-	* libc/reent/open64r.c: Ditto.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/search/Makefile.am: Add EL/IX level checking.
-	* libc/search/Makefile.in: Regenerated.
-	* libc/stdio/Makefile.am: Add EL/IX level checking.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdio64/Makefile.am: Add EL/IX level checking.
-	* libc/stdio64/Makefile.in: Regenerated.
-	* libc/stdio64/dummy.c: New file.
-	* libc/stdio64/fgetpos64.c: Fix so _LARGE64_FILES macro is checked
-	after first include.
-	* libc/stdio64/fopen64.c: Ditto.
-	* libc/stdio64/freopen64.c: Ditto.
-	* libc/stdio64/fseeko64.c: Ditto.
-	* libc/stdio64/fsetpos64.c: Ditto.
-	* libc/stdio64/ftello64.c: Ditto.
-	* libc/stdio64/tmpfile64.c: Ditto.
-	* libc/stdlib/Makefile.am: Add EL/IX level checking.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/stdlib/mstats.c: Add EL/IX level checking.
-	* libc/string/Makefile.am: Ditto.
-	* libc/string/Makefile.in: Regenerated.
-	* libc/sys/linux/Makefile.am: Add EL/IX level checking.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/aclocal.m4: Ditto.
-	* libc/sys/linux/configure: Ditto.
-	* libc/sys/linux/aio.c: Add EL/IX level checking.
-	* libc/sys/linux/ftok.c: Ditto.
-	* libc/sys/linux/getdate.c: Ditto.
-	* libc/sys/linux/ids.c: Ditto.
-	* libc/sys/linux/inode.c: Ditto.
-	* libc/sys/linux/io.c: Ditto.
-	* libc/sys/linux/process.c: Ditto.
-	* libc/sys/linux/resource.c: Ditto.
-	* libc/sys/linux/sched.c: Ditto.
-	* libc/sys/linux/sig.c: Ditto.
-	* libc/sys/linux/termios.c: Ditto.
-	* libc/sys/linux/wait.c: Ditto plus add __waitpid and
-	__libc___waitpid weak aliases.
-	* libc/sys/linux/machine/i386/syscall.h: Add new _base macros
-	that generate the code for a syscall, but do not create a
-	weak alias.
-	* libc/syscalls/Makefile.am: Add EL/IX level checking.
-	* libc/syscalls/Makefile.in: Regenerated.
-	* libc/time/tzset_r.c: Change to replace strdup with equivalent
-	functionality.
-	* libc/unix/Makefile.am: Add EL/IX level checking.
-	* libc/unix/Makefile.in: Regenerated.
-
-2002-08-26  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/malloc.h: On cygwin, define malloc _r functions as
-	wrapper macros to standard malloc functions.
-	* libc/include/stdlib.h: Ditto.
-	* configure.host: Always define MALLOC_PROVIDED on cygwin.
-
-2002-08-22  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/langinfo.h: New file.
-	* libc/include/wchar.h: Likewise.
-	* libc/include/sys/syslimits.h: Likewise.
-	* libc/locale/fix_grouping.c: Likewise.
-	* libc/locale/ldpart.c: Likewise.
-	* libc/locale/ldpart.h: Likewise.
-	* libc/locale/lmessages.c: Likewise.
-	* libc/locale/lmessages.h: Likewise.
-	* libc/locale/lmonetary.c: Likewise.
-	* libc/locale/lmonetary.h: Likewise.
-	* libc/locale/lnumeric.c: Likewise.
-	* libc/locale/lnumeric.h: Likewise.
-	* libc/locale/nl_langinfo.3: Likewise.
-	* libc/locale/nl_langinfo.c: Likewise.
-	* libc/locale/timelocal.c: Likewise.
-	* libc/locale/timelocal.h: Likewise.
-	* libc/stdlib/btowc.c: Likewise.
-	* libc/stdlib/mbrlen.c: Likewise.
-	* libc/stdlib/mbrtowc.c: Likewise.
-	* libc/stdlib/mbsinit.c: Likewise.
-	* libc/stdlib/mbsrtowcs.c: Likewise.
-	* libc/stdlib/wcrtomb.c: Likewise.
-	* libc/stdlib/wcsrtombs.c: Likewise.
-	* libc/stdlib/wctob.c: Likewise.
-	* libc/sys/linux/prof-freq.c: Likewise.
-	* libc/sys/linux/profile.c: Likewise.
-	* libc/sys/linux/machine/i386/dl-procinfo.c: Likewise.
-	* libc/sys/linux/machine/i386/dl-procinfo.h: Likewise.
-	* libc/include/stdlib.h: Change re-entrant functions to take
-	mbstate_t pointers.
-	* libc/include/sys/_types.h: Define _mbstate_t.
-	* libc/include/sys/config.h (MB_LEN_MAX): New macro.
-	* libc/include/sys/errno.h (EILSEQ): New error code.
-	* libc/include/sys/reent.h: Include wchar.h.  Change reentrant
-	structure to use mbstate_t.
-	* libc/locale/Makefile.am (LIB_SOURCES): Add new files.
-	* libc/machine/powerpc/vfprintf.c: Use mbstate_t.
-	* libc/machine/powerpc/vfscanf.c: Likewise.
-	* libc/stdio/getdelim.c: Reallocate buffer only when necessary.
-	* libc/stdio/vfprintf.c: Likewise.
-	* libc/stdio/vfscanf.c: Likewise.
-	* libc/stdlib/Makefile.am (LIB_SOURCES): Add new files.
-	* libc/stdlib/mblen.c: Use mbstate_t.
-	* libc/stdlib/mblen_r.c: Likewise.
-	* libc/stdlib/mbstowcs.c: Likewise.
-	* libc/stdlib/mbstowcs_r.c: Likewise.
-	* libc/stdlib/mbtowc.c: Likewise.
-	* libc/stdlib/mbtowc_r.c: Likewise.
-	* libc/stdlib/wcstombs.c: Likewise.
-	* libc/stdlib/wcstombs_r.c: Likewise.
-	* libc/stdlib/wctomb_r.c: Likewise.
-	* libc/sys/linux/Makefile.am (LIB_SOURCES): Add prof-freq.c and
-	profile.c.
-	* libc/sys/linux/machine/i386/Makefile.am (LIB_SOURCES): Add
-	dl-procinfo.c.
-	* libc/sys/linux/sys/errno.h (EILSEQ): New error code.
-	* libc/sys/linux/sys/types.h (off_t): Define type.
-	* testsuite/newlib.locale/UTF-8.c: Change locale name from UTF-8
-	to C-UTF-8.
-	* testsuite/newlib.locale/UTF-8.exp: Likewise.
-
-2002-08-20  Casper S. Hornstrup  <chorns@users.sourceforge.net>
-
-        * libc/stdlib/mallocr.c: #include windows.h on Win32.
-          (AlignPage): Continue macro on next line.
-
-2002-08-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/include/pthread.h: New file.
-
-2002-08-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/types.h: Support __need_inttypes macro
-	that only sets the __intxx and __uintxx types.  
-	* libc/machine/powerpc/Makefile.am: Add stdlib to include directories
-	to get mprec.h.
-	* libc/machine/powerpc/Makefile.in: Regenerated.
-	* libc/machine/powerpc/vfprintf.c: Fix state variable type.
-	* libc/machine/powerpc/vfscanf.c: Fix state variable type.  Remove
-	redundant fixed-point conversion prototypes.
-	* libc/machine/powerpc/machine/stdlib.h[__SPE__]: Include <sys/types.h>
-	after setting __need_inttypes.
-
-2002-08-18  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/unistd.h: Add getsid declaration for cygwin.
-
-2002-08-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/config.h[__PPC__][__SPE__]: Set
-        _LONG_DOUBLE to double.
-
-2002-08-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Add powerpc*-*-eabispe* configuration.
-	* libc/machine/powerpc/atosfix16.c: New fixed-point conversion file.
-	* libc/machine/powerpc/atosfix32.c: Ditto.
-	* libc/machine/powerpc/atosfix64.c: Ditto.
-	* libc/machine/powerpc/atoufix16.c: Ditto.
-	* libc/machine/powerpc/atoufix32.c: Ditto.
-	* libc/machine/powerpc/atoufix64.c: Ditto.
-	* libc/machine/powerpc/fix64.h: Ditto.
-	* libc/machine/powerpc/simdldtoa.c: Ditto.
-	* libc/machine/powerpc/strtosfix16.c: Ditto.
-	* libc/machine/powerpc/strtosfix32.c: Ditto.
-	* libc/machine/powerpc/strtosfix64.c: Ditto.
-	* libc/machine/powerpc/strtoufix16.c: Ditto.
-	* libc/machine/powerpc/strtoufix32.c: Ditto.
-	* libc/machine/powerpc/strtoufix64.c: Ditto.
-	* libc/machine/powerpc/ufix64toa.c: Ditto.
-	* libc/machine/powerpc/configure.in: Add check for
-	powerpc*-eabispe and add fixed-point conversion functions.
-	* libc/machine/powerpc/configure: Regenerated.
-	* libc/machine/powerpc/vfprintf.c[__SPE__]: Add support for
-	%r and %R format specifiers which handle fixed-point data.
-	* libc/machine/powerpc/vfscanf.c[__SPE__]: Ditto.
-	* libc/machine/powerpc/machine/stdlib.h[__SPE__]: Add fixed-point
-	function prototypes.
-
-2002-08-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  Makefile.am: Move cmath stuff into libc/sys/linux.
-	*  Makefile.in: Regenerated.
-	*  configure.host: Default -DMB_CAPABLE for x86-linux.
-	*  libc/include/reent.h: Define _sbrk to take signed int argument.
-	*  libc/include/sys/unistd.h: Ditto for _sbrk_r and sbrk.
-	*  libc/locale/locale.c[MB_CAPABLE]: Add LC_MESSAGES support and 
-	make locale name checking more efficient.  Also allow "C-ISO-8859-1" 
-	locale for LC_CTYPE and LC_MESSAGES.
-	*  libc/reent/sbrkr.c: Change prototype to take ptrdiff_t.
-	*  libc/sys/linux/brk.c: Change sbrk prototype.
-	*  libc/sys/linux/include/time.h: Remove Cygwin stuff and
-	include <sys/features.h>.
-	(CLOCK_THREAD_CPUTIME): Renamed to CLOCK_THREAD_CPUTIME_ID.
-	(CLOCK_PROCESS_CPUTIME): Renamed to CLOCK_PROCESS_CPUTIME_ID.
-	*  libc/sys/linux/sys/cdefs.h: Replace with glibc sys/cdefs.h
-	with a few local additions.
-	*  libc/sys/linux/sys/features.h: New file.
-	*  libc/sys/linux/sys/unistd.h: Change _sbrk_r and sbrk prototypes
-	to take signed argument.
-	*  libc/syscalls/syssbrk.c: Change sbrk, _sbrk_r, and _sbrk
-	prototypes to take signed size argument.
-
-2002-08-16  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/sys/linux/cmath: New directory.
-	* libc/sys/linux/include/cmathcalls.h: New file.
-	* libc/sys/linux/include/complex.h: New file.
-	* libc/sys/linux/machine/i386/huge_val.h: New file
-	* libm/math/w_sincos.c: New file
-	* libm/math/wf_sincos.c: New file
-	* libm/mathfp/s_sincos.c: New file
-	* libm/mathfp/sf_sincos.c: New file
-	* Makefile.am (LIBC_OBJECTLISTS): Add cmath/objectlist.awk.in.
-	* libc/include/math.h: Add sincos and sincosf declarations.
-	* libc/sys/linux/Makefile.am (SUBDIRS): Add cmath.
-	(SUBLIBS): Likewise.
-	* libc/sys/linux/configure.in (AC_OUTPUT): Add cmath.
-	* libm/math/Makefile.am (src): Add w_sincos.c.
-	(fsrc): Add wf_sincos.c.
-	* libm/mathfp/Makefile.am (src): Add s_sincos.c
-	(fsrc): Add sf_sincos.c.
-
-2002-08-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/machine/i386/crt0.c (__bss_start,_end):
-	Declare as extern chars and use the address operator to
-	properly use values set in linker script.
-
-2002-08-09  Jason Tishler  <jason@tishler.net>
-
-	* libc/stdlib/mallocr.c: Include <limits.h>.
-	(request2size): Change macro to do
-	unsigned long comparisons and avoid signed overflow.
-	(mALLOc): Add overflow check for the number of bytes to allocate.
-	(rEALLOc): Ditto.
-
-2002-08-09  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Add check for --enable-newlib-io-pos-args
-	and define WANT_IO_POS_ARGS flag if enabled.  Define
-	the flag by default for x86-linux configurations.
-	* configure.in: Add support for --enable-newlib-io-pos-args.
-	* libc/configure.in: Ditto.
-	* configure: Regenerated.
-	* libc/configure: Ditto.
-	* libc/stdio/Makefile.am: Specify -fshort-enums for compiling
-	vfprintf.c and vfiprintf.c.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdio/vfprintf.c: Add positional argument support that
-	is enabled by compiling with -DWANT_IO_POS_ARGS.
-
-2002-08-07  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/include/machine/setjmp.h: For mips, define _JBLEN based
-	based on __mips_soft_float rather than __mips64.
-	* libc/machine/mips/setjmp.S: Provide hard and soft float versions
-	of both 32-bit and 64-bit code.
-
-2002-08-04  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdio/popen.c (popen): Allow "rb", "rt", "wb", and "wt"
-	arguments for popen to match similar functionality in fopen.
-
-2002-07-29  Pierre Humblet  <pierre.humblet@ieee.org>
-
-	* libc/include/sys/unistd.h: Add setgroups prototype for Cygwin.
-
-2002-07-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add aio64.c. 
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/aio.c (aio_init): ENOSYS stub added.
-        * libc/sys/linux/aio64.c: New file.
-
-2002-07-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  libc/include/sys/param.h (MAX, MIN): Added macros.
-	*  libc/sys/linux/Makefile.am: Add new files.
-	*  libc/sys/linux/Makefile.in: Regenerated.
-	*  libc/sys/linux/sys/stat.h: Add *stat64 prototypes.
-	*  libc/sys/linux/inode.c (fchdir): Added syscall.
-	*  libc/sys/linux/ftw.c: New file.
-	*  libc/sys/linux/ftw64.c: Ditto.
-	*  libc/sys/linux/getwd.c: Ditto.
-	*  libc/sys/linux/scandir64.c: Ditto.
-	*  libc/sys/linux/strverscmp.c: Ditto.
-	*  libc/sys/linux/versionsort.c: Ditto.
-	*  libc/sys/linux/versionsort64.c: Ditto.
-
-2002-07-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/string/strings.tex: Fix typo for memccpy.
-
-2002-07-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/io64.c (truncate64, ftruncate64): Added.
-	* libc/sys/linux/sys/types.h (off64_t): Definition added.
-
-2002-07-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/Makefile.am: Add fclean.c.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/fclean.c: New file.
-
-2002-07-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/Makefile.am: Add confstr.c.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/confstr.c: New file.
-	* libc/sys/linux/confstr.h: Ditto.
-	* libc/sys/linux/sys/unistd.h: Include <features.h> and
-	<bits/environments.h>.
-
-2002-07-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/config.h (__set_errno): Macro definition removed.
-	* libc/sys/linux/fpathconf.c (__set_errno): Ditto.
-	* libc/sys/linux/libc-internal.h (__set_errno): Ditto.
-	* libc/sys/linux/pathconf.c (__set_errno): Ditto.
-	* libc/sys/linux/ttyname_r.c (__set_errno): Ditto.
-	* libc/sys/linux/sys/errno.h (__set_errno): Macro definition added.
-
-2002-07-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/Makefile.am: Add new files.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/fstab.c: New file.
-	* libc/sys/linux/fstatvfs.c: Ditto.
-	* libc/sys/linux/fstatvfs64.c: Ditto.
-	* libc/sys/linux/internal_statvfs.c: Ditto.
-	* libc/sys/linux/mntent.c: Ditto.
-	* libc/sys/linux/mntent_r.c: Ditto.
-	* libc/sys/linux/statvfs.c: Ditto.
-	* libc/sys/linux/statvfs64.c: Ditto.
-	* libc/sys/linux/include/paths.h: Ditto.
-	* libc/sys/linux/inode.c (statfs, fstatfs): New syscalls
-	with double-underscore weak-aliases.
-	* libc/sys/linux/sys/stat.h: Add *stat64 prototypes.
-
-2002-07-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/signal.h (SIG_IGN, SIG_DFL, SIG_ERR): Change
-	to use _sig_func_ptr type casted constants.
-	(_sig_func_ptr): Typedef moved to sys/signal.h.
-	* libc/include/sys/signal.h (_sig_func_ptr): Typedef added.
-	For __rtems, use POSIX definition, otherwise default to ANSI.
-	* libc/sys/linux/sys/signal.h (_sig_func_ptr): Typedef added.
-
-2002-07-24  Stephane Carrez  <stcarrez@nerim.fr>
-
-        * configure.host: Recognize m6811-elf and m6812-elf targets.
-        * libc/include/machine/setjmp.h (_JBLEN): Define for 68hc11/68hc12.
-        * libc/include/machine/ieeefp.h (__IEEE_BIG_ENDIAN): Define for 68HC11.
-        (_DOUBLE_IS_32BITS): Define when compiling with -fshort-double.
-        * libc/include/sys/config.h (INT_MAX, UINT_MAX): Define
-        according to __INT_MAX__.
-        (_POINTER_INT): Define to short.
-        * libc/machine/m68hc11/Makefile.am: New file.
-        * libc/machine/m68hc11/Makefile.in: New file.
-        * libc/machine/m68hc11/configure.in: New file.
-        * libc/machine/m68hc11/configure: New file.
-        * libc/machine/m68hc11/aclocal.m4: New file.
-        * libc/machine/m68hc11/setjmp.S: New file.
-
-2002-07-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/string.h: Add mempcpy, strndup, and _strndup_r
-	prototypes.
-	* libc/stdlib/Makefile.am: Remove strdup.c and strdup_r.c.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/stdlib/strdup.c: Removed.
-	* libc/stdlib/strdup_r.c: Removed.
-	* libc/string/Makefile.am: Add strdup.c, strdup_r.c, memccpy.c,
-	mempcpy.c, strndup.c, and strndup_r.c.
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/memccpy.c: New file.
-	* libc/string/mempcpy.c: Ditto.
-	* libc/string/strndup.c: Ditto.
-	* libc/string/strndup_r.c: Ditto.
-	* libc/string/strdup.c: New file moved from stdlib.
-	* libc/string/strdup_r.c: Ditto.
-	* libc/string/strings.tex: Add memccpy and mempcpy documentation.
-
-2002-07-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/stdio.h: Move fcloseall prototype within
-        #ifndef _REENT_ONLY section.
-        * libc/sys/linux/Makefile.am: Add new files.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/sys/stdio.h: Add ctermid prototype.
-        * libc/sys/linux/sys/unistd.h: Add ttyname_r prototype.
-	* libc/sys/linux/sys/types.h: Add ino64_t type.
-        * libc/sys/linux/ctermid.c: New file.
-        * libc/sys/linux/ttyname_r.c: Ditto.
-	* libc/sys/linux/readdir64.c: Ditto.
-
-2002-07-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h (fcloseall, _fcloseall_r): Added prototypes.
-	* libc/stdio/Makefile.am: Added fcloseall.c support.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdio/fcloseall.c: New file.
-	* libc/stdio64/Makefile.am: Remove missing .def references.
-	* libc/stdio64/Makefile.in: Regenerated.
-
-2002-07-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/powerpc/time.c: Removed..renamed to times.c.
-	* libc/machine/powerpc/times.c: New file.
-	* libc/machine/powerpc/Makefile.am: Change time.c to times.c.
-	* libc/machine/powerpc/Makefile.in: Regenerated.
-
-2002-07-22  Aldy Hernandez  <aldyh@redhat.com>
-
-        * libc/machine/powerpc/time.c: New file.
-        * libc/machine/powerpc/Makefile.am (lib_a_SOURCES): Add
-        time.c.
-	* libc/machine/powerpc/Makefile.in: Regenerated.
-
-2002-07-22  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/libc.texinfo: Change copyright notices to Red Hat from
-	Cygnus.
-	* libm/libm.texinfo: Likewise.
-	* README: Change docs URL to
-	http://sources.redhat.com/newlib/docs.html.
-
-2002-07-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add pathconf.c and fpathconf.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/inode.c: Add chmod, fchmod, and chown syscalls.
-        * libc/sys/linux/io.c: Add ftruncate syscall.
-        * libc/sys/linux/fpathconf.c: New file.
-        * libc/sys/linux/pathconf.c: Ditto.
-	* libc/sys/linux/linux_fsinfo.h: Ditto.
-        * libc/sys/linux/sys/unistd.h: Ditto.
-
-2002-07-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio64/Makefile.am: Remove missing files.
-	* libc/stdio64/Makefile.in: Regenerated.
-
-2002-07-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/config.h[__i386__][__linux__]: Define
-        _LARGE64FILE_SOURCE to 1.
-        * libc/sys/linux/Makefile.am: Add getrlimit64.c and setrlimit64.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/resource.c: Add __getrlimit and __setrlimit aliases.
-        * libc/sys/linux/sys/linux_time.h: Protect struct timeval definition.
-        * libc/sys/linux/sys/resource.h: Include <bits/resource.h> instead
-        of <linux/resource.h>.
-        * libc/sys/linux/getrlimit64.c: New file.
-        * libc/sys/linux/setrlimit64.c: Ditto.
-
-2002-07-19  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/argz/argz_replace.c: Include buf_findstr.h.
-	* libc/argz/buf_findstr.c: Likewise.
-	* libc/argz/envz_entry.c: Include buf_findstr.h.  Cast return
-	value to (char *).
-	* libc/argz/envz_get.c: Likewise.
-	* libc/include/sys/unistd.h: Add getopt and getsubopt declarations.
-	* libc/stdlib/Makefile.am (LIB_SOURCES): Add getsubopt.c.
-	* libc/stdlib/getsubopt.3: New file.
-	* libc/stdlib/getsubopt.c: New file.
-	* libc/sys/linux/machine/i386/socketcall.h (__sockcall_base):
-	Change esp to ebp.
-
-2002-07-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host(stdio64_dir): New setting that is used to
-	enable building of new stdio64 directory.
-	* libc/Makefile.am[HAVE_STDIO64_DIR]: Add support for
-	large files.
-	(stmp-stdio64,stdio64.texi): New targets to optionally add in
-	stdio64 info to info files.
-	* libc/Makefile.in: Regenerated.
-	* libc/configure: Ditto.
-	* libc/configure.in: Add configuration variables that are set
-	when stdio64 is selected as subdir in configure.host.
-	* libc/libc.texinfo: Add optional menu item for Stdio64, based
-	on whether STDIO64 flag is set or not.
-	* libc/sys.tex: Add optional stdio64 syscalls based on whether
-	STDIO64 flag is set or not.
-	* libc/include/reent.h[__LARGE64_FILES]: Add new stdio64
-	_r sycall routines.
-	* libc/include/stdio.h[__LARGE64_FILES]: Add new stdio64 prototypes.
-	(FILE): Typedef'd to __FILE instead of struct __sFILE directly.
-	(__SL64): New file flag indicating file is opened via fopen64.
-	* libc/include/sys/_types.h(_off64_t): Added.
-	* libc/include/sys/config.h: For x86-linux, define __LARGE64_FILES.
-	* libc/include/sys/reent.h(struct __sFILE64): New file structure
-	for 64-bit offset large file support.
-	(__FILE): New intermediate type either set to struct __sFILE64 or
-	struct __sFILE, depending on whether __LARGE64_FILES is set or not.
-	* libc/reent/Makefile.am[HAVE_STDIO64_DIR]: Add new files.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/reent/fstat64r.c: New file.
-	* libc/reent/lseek64r.c: Ditto.
-	* libc/reent/open64r.c: Ditto.
-	* libc/reent/reent.tex: Optionally add stdio64 reentrant syscalls
-	based on whether STDIO64 flag is set. 
-	* libc/stdio/stdio.tex: Add blank line.
-	* libc/stdio64/Makefile.am: New file.
-	* libc/stdio64/Makefile.in: Ditto.
-	* libc/stdio64/fgetpos64.c: Ditto.
-	* libc/stdio64/fopen64.: Ditto.
-	* libc/stdio64/freopen64.c: Ditto.
-	* libc/stdio64/fseeko64.c: Ditto.
-	* libc/stdio64/fsetpos64.c: Ditto.
-	* libc/stdio64/ftello64.c: Ditto.
-	* libc/stdio64/local64.h: Ditto.
-	* libc/stdio64/stdio64.c: Ditto.
-	* libc/stdio64/stdio64.tex: Ditto.
-	* libc/stdio64/tmpfile64.c: Ditto.
-	* libc/sys/linux/io64.c: Add weak aliases for lseek64, fstat64, and
-	open64.
-
-2002-07-16  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/Makefile.am (stmp-extra): New target to set makeinfo flag
-        if LIBC_EXTRA_LIB is present.
-        * libc/Makefile.in: Regenerated.
-	* libc/libc.texinfo: Add blank line.
-        * libc/argz/Makefile.am: Add doc support.
-        * libc/search/Makefile.am: Ditto.
-        * libc/argz/Makefile.in: Regenerated.
-        * libc/search/Makefile.in: Ditto.
-        * libc/misc/misc.tex: Add ffs function.
-        * libc/stdio/ftell.c: Fix missing doc delimeter in description.
-
-2002-07-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/config.h[__H8300__]: Replace __SMALL_BITFIELDS
-	definition that was removed in error.
-
-2002-07-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/machine/ieeefp.h: Change to only define
-	floating point defines (e.g one of __IEEE_BIG_ENDIAN or 
-	__IEEE_LITTLE_ENDIAN must be defined for each platform).
-	* libc/include/sys/config.h: Include <machine/ieeefp.h> and
-	remove redundant floating point definitions.
-
-2002-07-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/callocr.c: Fix so code references
-        calloc.
-
-2002-07-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add new files.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/bp-sym.h: Moved to include directory.
-        * libc/sys/linux/mmap.c: Add weak aliases: __mmap, __munmap, __mremap.
-        * libc/sys/linux/inode.c: Set _LIBC to 1.
-        * libc/sys/linux/mq_close.c: Ditto.
-        * libc/sys/linux/mq_getattr.c: Ditto.
-        * libc/sys/linux/mq_open.c: Ditto.
-        * libc/sys/linux/mq_receive.c: Ditto.
-        * libc/sys/linux/mq_send.c: Ditto.
-        * libc/sys/linux/mq_setattr.c: Ditto.
-        * libc/sys/linux/mq_unlink.c: Ditto.
-        * libc/sys/linux/calloc.c: New file.
-        * libc/sys/linux/callocr.c: Ditto.
-        * libc/sys/linux/cfreer.c: Ditto.
-        * libc/sys/linux/config.h: Ditto.
-        * libc/sys/linux/free.c: Ditto.
-        * libc/sys/linux/freer.c: Ditto.
-        * libc/sys/linux/msize.c: Ditto.
-        * libc/sys/linux/msizer.c: Ditto.
-        * libc/sys/linux/mstats.c: Ditto.
-        * libc/sys/linux/mtrim.c: Ditto.
-        * libc/sys/linux/mtrimr.c: Ditto.
-        * libc/sys/linux/pvallocr.c: Ditto.
-        * libc/sys/linux/realloc.c: Ditto.
-        * libc/sys/linux/reallocr.c: Ditto.
-        * libc/sys/linux/thread-m.h: Ditto.
-        * libc/sys/linux/vallocr.c: Ditto.
-        * libc/sys/linux/bp-checks.h: Ditto.
-        * libc/sys/linux/libc-symbols.h: Ditto.
-        * libc/sys/linux/libc-tsd.h: Ditto.
-        * libc/sys/linux/libintl.h: Ditto.
-        * libc/sys/linux/malign.c: Ditto.
-        * libc/sys/linux/malignr.c: Ditto.
-        * libc/sys/linux/mallinfor.c: Ditto.
-        * libc/sys/linux/malloc.c: Ditto.
-        * libc/sys/linux/mallocr.c: Ditto.
-        * libc/sys/linux/malloptr.c: Ditto.
-        * libc/sys/linux/mallstatsr.c: Ditto.
-        * libc/sys/linux/mcheck.c: Ditto.
-        * libc/sys/linux/mhooks.h: Ditto.
-        * libc/sys/linux/include/bp-sym.h: Ditto.
-        * libc/sys/linux/include/malloc.h: Ditto.
-        * libc/sys/linux/include/mcheck.h: Ditto.
-        * libc/sys/linux/linuxthreads/machine/i386/Makefile.am: Remove
-        getpagesize.c.
-        * libc/sys/linux/linuxthreads/machine/i386/Makefile.in: Regenerated.
-        * libc/sys/linux/linuxthreads/machine/i386/getpagesize.c: Moved.
-        * libc/sys/linux/machine/i386/getpagesize.c: New file.
-        * libc/sys/linux/machine/i386/Makefile.am: Add getpagesize.c.
-        * libc/sys/linux/machine/i386/Makefile.in: Regenerated.
-        * libc/sys/linux/machine/i386/sysdep.h: New file.
-        * libc/sys/linux/machine/i386/weakalias.h: Add weak_function support.
-        * libc/sys/linux/sys/dirent.h: Set _LIBC to 1.
-        * libc/sys/linux/sys/lock.h: Include <machine/weakalias.h>.
-
-2002-07-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/include/mqueue.h: Change to use <bits/siginfo.h>
-	instead of <asm/siginfo.h>.
-	* libc/sys/linux/sys/signal.h: Change to include various linux
-	<bits/xxx.h> header files, rather than <linux/signal.h> so as
-	to work with multiple releases of glibc header files.
-
-2002-07-11  Chris Demetriou  <cgd@broadcom.com>
-
-        * testsuite/newlib.search/hsearchtest.c: New file to test
-        newlib/libc/search.
-        * testsuite/newlib.search/hsearchtest.exp: Likewise.
-
-2002-07-10  Florian Schrack  <florian.schrack@freenet.de>
-
-	* libc/sys/mmixware/read.c: Use SYS_Fgets syscall if dealing with
-	a terminal.
-	* libc/sys/mmixware/sys/syscall.h (SYS_Fgets): Definition added.
-
-2002-07-08  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/math.h (MAXFLOAT): Added.
-
-Mon Jul  8 13:55:23 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/Makefile.am (lib_a_SOURCES):
-	Make strcmp.S unconditional.
-	* libc/machine/sh/Makefile.in: Regenerate.
-	* libc/machine/sh/asm.h (DELAYED_BRANCHES, SL): Also for __SH5__ .
-	* strcmp.S (strcmp): Add SHmedia variant.  Use different registers
-	for SHcompact.
-
-2002-07-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/inode.c: Fix utime prototype and add _LIBC
-	define before including <sys/lock.h>.
-
-2002-07-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/utime.h: Add include of <_ansi.h>.
-	* libc/sys/linux/Makefile.am: Add utimes.c.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/inode.c(__umask): New static routine.
-	(umask): Written to use __umask and attempt to thread lock.
-	(getumask): New function written to use __umask and thread lock.
-	* libc/sys/linux/utimes.c: New file.
-	* libc/sys/linux/sys/time.h: Fix utimes prototype.
-	* libc/sys/linux/sys/utime.h: New file.
-
-2002-07-04  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libtool.m4: New file.
-	* libc/sys/linux/process.c: Implement vfork in terms of fork,
-	rather than as a syscall.
-
-2002-07-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h: Add new prototypes.
-	* libc/stdio/Makefile.am: Add fseeko.c and ftello.c.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdio/fseek.c: Add fseeko documentation.
-	* libc/stdio/ftell.c: Add ftello documentation.
-	* libc/stdio/fseeko.c: New file.
-	* libc/stdio/ftello.c: New file.
-
-2002-07-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/stdio/Makefile.am: Add asprintf.c and vasprintf.c.
-        * libc/stdio/Makefile.in: Regenerated.
-        * libc/stdio/asprintf.c: New file.
-        * libc/stdio/vasprintf.c: Ditto.
-        * libc/stdio/fvwrite.c: Add code to dynamically reallocate
-        the buffer for asprintf support.
-        * libc/stdio/sprintf.c: Add asprintf documentation.
-        * libc/stdio/vfprintf.c: Add vasprintf documentation.
-        * libc/include/stdio.h: Add new prototypes.
-
-2002-07-02  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/search/hcreate.c: Remove advertising clause from license.
-	* libc/search/hcreate_r.c: Likewise.
-
-2002-07-02  Chris Demetriou  <cgd@broadcom.com>
-
-        * libc/include/sys/config.h (__IEEE_LITTLE_ENDIAN)
-        (__IEEE_BIG_ENDIAN): Define appropriately for MIPS.
-        Check that one of them is defined and error out if not.
-	Add any platforms defined in <machine/ieeefp.h> that are missing.
-        * libc/search/hash.h (DB_BYTE_ORDER, DB_BIG_ENDIAN)
-        (DB_LITTLE_ENDIAN): New defines.
-        * libc/search/hash.c: Replace all incorrect checks for
-        _IEEE_LITTLE_ENDIAN with tests of BYTE_ORDER, and all uses of
-        BYTE_ORDER, LITTLE_ENDIAN, and BIG_ENDIAN with DB_* versions.
-        * libc/search/hash_page.c: Likewise.
-
-2002-06-28  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libm/mathfp/sf_pow.c (powf): Change k from int to float.
-
-2002-06-27  Benjamin Kosnik  <bkoz@redhat.com>
-
-        * libc/include/stdio.h: Untangle, add _BEGIN_STD_C and _END_STD_C.
-        * libc/include/time.h: Same.
-        * libc/include/string.h: Same.
-        * libc/include/stdlib.h: Same.
-        * libc/include/signal.h: Same.
-        * libc/include/setjmp.h: Same.
-        * libc/include/math.h: Same.
-        * libc/include/locale.h: Same.
-        * libc/include/ctype.h: Same.
-        * libc/include/machine/setjmp.h: Same.
-        * libc/include/_ansi.h (_BEGIN_STD_C): Add.
-        (_END_STD_C): Add.
-
-2002-06-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/_types.h: Define _ssize_t as int if int is
-        32-bits, otherwise define it as long.
-        * libc/include/sys/types.h: Include <_ansi.h> and <sys/_types.h>
-        and define ssize_t as _ssize_t.
-        * libc/reent/readr.c: Change return type to _ssize_t.
-        * libc/reent/writer.c: Ditto.
-        * libc/sys/linux/Makefile.am: Add aio.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/aio.c: New file.
-        * libc/sys/linux/sys/cdefs.h: Add __restrict_arr definition.
-        * libm/common/fdlibm.h: Undef __P before defining it.
-
-2002-06-27  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libm/mathfp/s_pow.c (pow): Fix checks on variable k.  Add
-	exponent_is_even_int variable.  Handle case where x is
-	negative, and y is an odd integer.
-	* libm/mathfp/sf_pow.c (powf): Likewise.
-
-	* libm/mathfp/er_lgamma.c: Remove __kernel references.
-	* libm/mathfp/erf_lgamma.c: Likewise.
-	* libm/mathfp/s_tgamma.c: Likewise.
-	* libm/mathfp/sf_tgamma.c: Likewise.
-
-2002-06-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add new clock routines.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/clock_getres.c: New file.
-        * libc/sys/linux/clock_gettime.c: Ditto.
-        * libc/sys/linux/clock_settime.c: Ditto.
-        * libc/sys/linux/hp-timing.h: Ditto.
-        * libc/sys/linux/libc-internal.h: Ditto.
-        * libc/sys/linux/sysconf.c: Fix typo.
-        * libc/sys/linux/include/time.h: Add include of <sys/linux_time.h>.
-        * libc/sys/linux/machine/hp-timing.h: New file.
-        * libc/sys/linux/machine/i386/Makefile.am: Add new files.
-        * libc/sys/linux/machine/i386/Makefile.in: Regenerated.
-        * libc/sys/linux/machine/i386/get_clockfreq.c: New file.
-        * libc/sys/linux/machine/i386/hp-timing.c: Ditto.
-        * libc/sys/linux/machine/i386/hp-timing.h: Ditto.
-        * libc/sys/linux/sys/linux_time.h: New file.
-        * libc/sys/linux/sys/time.h: Remove include of <linux/time.h> and
-        replace with <sys/linux_time.h>.
-
-Wed Jun 26 16:33:25 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/sys/sh/crt0.S: Remove vestigial .section directive.
-
-2002-06-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Consolidate additional items under
-        ADD_OBJS.
-        * libc/sys/linux/Makefile.in: Regenerated.
-
-2002-06-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/sethostname.c: New file.
-        * libc/sys/linux/Makefile.am: Add sethostname.c support.
-        * libc/sys/linux/Makefile.in: Regenerated.
-
-2002-06-24  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/search/db_local.h: New file.
-	* libc/include/db.h: Remove.
-	* libc/search/Makefile.am (LIB_SOURCES): Add db_local.h.
-	* libc/search/hash.c (MIN,MAX): Add macros.  Change <db.h> to
-	"db_local.h".
-	* libc/search/hash_bigkey.c: Likewise.
-	* libc/search/hash_buf.c: Likewise.
-	* libc/search/hash_func.c: Likewise.
-	* libc/search/hash_log2.c: Likewise.
-	* libc/search/hash_page.c: Likewise.
-
-2002-06-24  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/strlen.S: New file.
-	* libc/machine/sh/Makefile.am (lib_a_SOURCES): Add rule for it.
-	* libc/machine/sh/Makefile.am: Regenerate.
-
-2002-06-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/gethostname.c: Change name to __gethostname and
-        add gethostname alias.
-
-2002-06-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h: Remove <sys/types.h>.
-	(__dmath): Use __ULong instead of __uint32_t.
-	* libc/include/sys/reent.h: If long or int is not 32-bits,
-	include <sys/types.h> to get definitions for __int32_t and __uint32_t.
-	* libc/stdlib/mprec.h: Include <sys/types.h> to get integer defs.
-	* libm/common/fdlibm.h: Ditto.
-
-2002-06-24  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/ndbm.h: Remove.
-	* libc/search/ndbm.c: Remove.
-
-2002-06-24  WATANABE Hirofumi <eban@os.rim.or.jp>
-
-	* libc/stdio/fseek.c (fseek): Fix braces.
-
-2002-06-21  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/time/strftime.c (strftime): Add %e format specifier.
-
-2002-06-21  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/search/hash.h (LITTLE_ENDIAN, BIG_ENDIAN): Define if not
-	previously defined.
-
-2002-06-21  Richard Earnshaw  (rearnsha@arm.com)
-
-        * libc/sys/arm/sys/param.h (BIG_ENDIAN, LITTLE_ENDIAN): Define.
-        (BYTE_ORDER): Define as appropriate for the target.
-
-2002-06-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/config.h[__linux__]: Set _READ_WRITE_RETURN_TYPE
-	to _ssize_t.
-	* libc/sys/linux/io.c (read, write): Change to return ssize_t.
-
-2002-06-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h (__getline, __getdelim): New prototypes.
-	* libc/include/time.h [HAVE_GETDATE](getdate, getdate_r): Ditto.
-	[HAVE_GETDATE](getdate_err): New error code.
-	* libc/stdio/Makefile.am: Add support for getline.c and getdelim.c.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdio/getdelim.c: New file.
-	* libc/stdio/getline.c: Ditto.
-	* libc/sys/linux/Makefile.am: Add support for getdate.c, getdate_err.c
-	and ntp_gettime.c.  Also add AM_CFLAGS to point to libc/stdio.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/getdate.c: New file.
-	* libc/sys/linux/getdate_err.c: Ditto.
-	* libc/sys/linux/ntp_gettime.c: Ditto.
-	* libc/sys/linux/time.c (adjtimex, ntp_adjtime): New functions.
-	* libc/sys/linux/sys/stdio.h (getline, getdelim): New macros.
-
-2002-06-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h: Add <sys/types.h> to get _uint32_t definition.
-	* libc/include/machine/types.h: Skip __off_t, __pid_t, and
-	__loff_t definitions if special _HAVE_SYSTYPES macro defined.
-	* libc/include/sys/config.h: Removed _uint*, _int* definitions.
-	* libc/include/sys/param.h: Remove i386 case which is handled
-	by default case.
-	(BIG_ENDIAN, LITTLE_ENDIAN): Protect
-	definitions in case they are already defined.
-	(BYTE_ORDER): Add default case using _IEEE_BIG_ENDIAN and
-	_IEEE_LITTLE_ENDIAN flags.
-	* libc/include/sys/reent.h: Change __uint32_t references to
-	use _ULong instead.
-	(_REENT_GETDATE_REENT_P): New macro.
-	* libc/include/sys/types.h (__int16_t, __uint16_t): Added.
-	(__int32_t, __uint32_t, __int64_t, __uint64_t): Ditto.
-	* libc/search/hash.h: Add default setting of BYTE_ORDER,
-	LITTLE_ENDIAN, and BIG_ENDIAN, if not already defined.
-	* libc/sys/linux/sys/types.h: Include <sys/_types.h>.  Define
-	ssize_t based on _ssize_t.  Remove __socklen_t, __uintptr_t,
-	pid_t, off_t, loff_t, caddr_t, and daddr_t type
-	definitions which are done by subsequent glibc headers.
-	Add macro definitions to prevent subsequent header files from
-	defining pid_t, off_t, ssize_t, and key_t.  Move uintptr_t and
-	intptr_t to after glibc definitions of types they are based on.
-
-2002-06-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/errno.h: Protect from multiple inclusion.
-
-2002-06-21  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/sys/arm/swi.h (ADP_Stopped_RunTimeError): Set correct value.
-
-2002-06-20  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* Makefile.am (LIB_OBJECTLISTS): Add
-	libc/search/objectlist.awk.in.
-	* libc/Makefile.am (SUBDIRS): Add search.
-	(SUBLIBS): Add search/libsearch.la.
-	* libc/configure.in (AC_OUTPUT): Add search/Makefile.
-	* libc/search: New directory.
-	* libc/search/Makefile.am: New file.
-	* libc/search/extern.h: New file.
-	* libc/search/hash.c: New file.
-	* libc/search/hash.h: New file.
-	* libc/search/hash_bigkey.c: New file.
-	* libc/search/hash_buf.c: New file.
-	* libc/search/hash_func.c: New file.
-	* libc/search/hash_log2.c: New file.
-	* libc/search/hash_page.c: New file.
-	* libc/search/hcreate.3: New file.
-	* libc/search/hcreate.c: New file.
-	* libc/search/hcreate_r.c: New file.
-	* libc/search/ndbm.c: New file.
-	* libc/search/page.h: New file.
-	* libc/search/tdelete.c: New file.
-	* libc/search/tdestroy.c: New file.
-	* libc/search/tfind.c: New file.
-	* libc/search/tsearch.3: New file.
-	* libc/search/tsearch.c: New file.
-	* libc/search/twalk.c: New file.
-	* libc/include/db.h: New file.
-	* libc/include/ndbm.h: New file.
-	* libc/include/search.h: New file.
-	* libc/include/sys/queue.h: New file.
-	* libc/include/sys/cdefs.h: New file.
-	* libc/include/sys/param.h
-	[__IEEE_LITTLE_ENDIAN,__IEEE_BIG_ENDIAN]: Set BYTE_ORDER to
-	LITTLE_ENDIAN or BIG_ENDIAN.
-	* libc/include/sys/errno.h (EFTYPE): New macro.
-	* libc/search/bsearch.c: Move from libc/stdlib.
-	* libc/search/qsort.c: Likewise.
-	* libc/stdlib/Makefile.am (LIB_SOURCES): Remove bsearch.c and
-	qsort.c.
-	(CHEWOUT_FILES): Remove bsearch.def and qsort.def.
-	* libc/stdlib/stdlib.tex: Remove references to bsearch and qsort.
-
-2002-06-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add support for message queue routines,
-        ipc routines, and ftok.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/ftok.c: New file.
-        * libc/sys/linux/ipc.c: Ditto.
-        * libc/sys/linux/mq_close.c: Ditto.
-        * libc/sys/linux/mq_getattr.c: Ditto.
-        * libc/sys/linux/mq_notify.c: Ditto.
-        * libc/sys/linux/mq_open.c: Ditto.
-        * libc/sys/linux/mq_receive.c: Ditto.
-        * libc/sys/linux/mq_send.c: Ditto.
-        * libc/sys/linux/mq_setattr.c: Ditto.
-        * libc/sys/linux/mq_unlink.c: Ditto.
-        * libc/sys/linux/mqlocal.h: Ditto.
-        * libc/sys/linux/include/mqueue.h: Ditto.
-        * libc/sys/linux/sys/types.h: Define __gid_t_defined and
-        __uid_t_defined.
-
-2002-06-19  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libm/common/sf_lround.c (round): Change name to: (lround).
-	* libm/common/sf_remquo.c (remquo): Pass all arguemnts to
-	remquof.
-
-2002-06-18  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* testsuite/lib/passfail.exp (newlib_pass_fail_all): New
-	procedure.
-	(newlib_pass_fail): Change to compile and run only one file.
-	* testsuite/newlib.locale/locale.exp: Use new
-	newlib_pass_fail_all procedure.
-	* testsuite/newlib.string/string.exp: Likewise.
-
-2002-06-18  Dave Brolley  <brolley@redhat.com>
-
-	From Catherine Moore, Michael Meissner, Richard Sandiford:
-	* libc/include/machine/setjmp.h (_JBLEN): Define for __frv__.
-	(_JBTYPE): Ditto.
-	* libc/include/sys/config.h (__IEEE_BIG_ENDIAN): Ditto.
-	(__ATTRIBUTE_IMPURE_PTR__): Ditto.
-	* libc/include/machine/ieeefp.h (__IEEE_BIG_ENDIAN): Ditto.
-	* configure.host: Support frv-*-*.
-	* libc/machine/frv/Makefile.am: New file.
-	* libc/machine/frv/configure.in: New file.
-	* libc/machine/frv/setjmp.S: New file.
-
-2002-06-18  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/ctype.h: Remove isblank macro.
-
-	* libc/ctype/Makefile.am (LIB_SOURCES): Add isblank.c.
-	* libc/ctype/isblank.c: New file.
-	* libc/include/ctype.h [!__STRICT_ANSI__]: Add isblank
-	declaration.  Add isblank macro.
-
-2002-06-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * testsuite/newlib.stdlib/atexit.c: New file.
-        * testsuite/newlib.stdlib/atexit.exp: Ditto.
-        * testsuite/newlib.string/tstring.c: Change default start size
-        to something more reasonable for embedded platforms.
-
-2002-06-14  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/sys/linux/sys/errno.h (EFTYPE): Add macro.
-
-	* libc/argz: New directory.
-	* libc/argz/*: New files.
-	* libc/argz/argz_add.c: New file.
-	* libc/argz/argz_add_sep.c: New file.
-	* libc/argz/argz_append.c: New file.
-	* libc/argz/argz_count.c: New file.
-	* libc/argz/argz_create.c: New file.
-	* libc/argz/argz_create_sep.c: New file.
-	* libc/argz/argz_delete.c: New file.
-	* libc/argz/argz_extract.c: New file.
-	* libc/argz/argz_insert.c: New file.
-	* libc/argz/argz_next.c: New file.
-	* libc/argz/argz_replace.c: New file.
-	* libc/argz/argz_stringify.c: New file.
-	* libc/argz/buf_findstr.c: New file.
-	* libc/argz/envz_add.c: New file.
-	* libc/argz/envz_entry.c: New file.
-	* libc/argz/envz_get.c: New file.
-	* libc/argz/envz_merge.c: New file.
-	* libc/argz/envz_remove.c: New file.
-	* libc/argz/envz_strip.c: New file.
-	* libc/include/argz.h: New file.
-	* libc/include/envz.h: New file.
-	* Makefile.am (LIBC_OBJECTLISTS): Add
-	libc/argz/objectlist.awk.in.
-	* libc/Makefile.am (SUBDIRS): Add argz.
-	(SUBLIBS): Add argz/libargz.la.
-	* libc/configure.in (AC_OUTPUT): Add argz/Makefile.
-	* libc/include/errno.h: Add error_t typedef.
-
-2002-06-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h: Add _Exit prototype.
-	* libc/stdlib/Makefile.am: Add _Exit.c support.
-	* libc/stdlib/Makefile.in: Ditto.
-	* libc/stdlib/_Exit.c: New file.
-
-2002-06-13  Stephen L. Moshier  <steve@moshier.net>
-
-	* libm/math/e_pow.c (__ieee754_pow): Fix case whereby
-	x is close to -1.0 and y is very large to use ax (absolute value)
-	instead of x.
-	* libm/math/ef_pow.c (__ieee754_powf): Ditto.
-
-Thu Jun 13 19:23:40 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/strcpy.S (strcpy, __SHMEDIA__ code):
-	Fix clobbering bytes before destination if src and dst have same
-	non-zero misalignment.
-
-	* libc/machine/sh/memset.S (memset, __SHMEDIA__ code):
-	Fixed bug in writing end of set region.
-
-2002-06-10  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/process.h: Remove cygwin-only sexec* declarations.  Fix
-	spawnve declaration.
-
-2002-06-06  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libm/common/s_fdim.c: New file.
-	* libm/common/s_fma.c: Likewise.
-	* libm/common/s_fmax.c: Likewise.
-	* libm/common/s_fmin.c: Likewise.
-	* libm/common/s_fpclassify.c: Likewise.
-	* libm/common/s_lrint.c: Likewise.
-	* libm/common/s_lround.c: Likewise.
-	* libm/common/s_nearbyint.c: Likewise.
-	* libm/common/s_remquo.c: Likewise.
-	* libm/common/s_round.c: Likewise.
-	* libm/common/s_scalbln.c: Likewise.
-	* libm/common/s_signbit.c: Likewise.
-	* libm/common/s_trunc.c: Likewise.
-	* libm/common/sf_fdim.c: Likewise.
-	* libm/common/sf_fma.c: Likewise.
-	* libm/common/sf_fmax.c: Likewise.
-	* libm/common/sf_fmin.c: Likewise.
-	* libm/common/sf_lrint.c: Likewise.
-	* libm/common/sf_lround.c: Likewise.
-	* libm/common/sf_nearbyint.c: Likewise.
-	* libm/common/sf_remquo.c: Likewise.
-	* libm/common/sf_round.c: Likewise.
-	* libm/common/sf_scalbln.c: Likewise.
-	* libm/common/sf_trunc.c: Likewise.
-	* libm/math/w_exp2.c: Likewise.
-	* libm/math/w_tgamma.c: Likewise.
-	* libm/math/wf_exp2.c: Likewise.
-	* libm/math/wf_tgamma.c: Likewise.
-	* libm/mathfp/s_exp2.c: Likewise.
-	* libm/mathfp/s_tgamma.c: Likewise.
-	* libm/mathfp/sf_exp2.c: Likewise.
-	* libm/mathfp/sf_tgamma.c: Likewise.
-	* libm/math/er_gamma.c: Fix return value.
-	* libm/math/erf_gamma.c: Likewise.
-	* libm/mathfp/er_gamma.c: Likewise.
-	* libm/mathfp/erf_gamma.c: Likewise.
-	* libc/include/math.h (!__STRICT_ANSI__): Include ISOC99-specific
-	declarations and macros.
-	Regenerated all Makefile.in, aclocal.m4 and configure files to
-	use new libtool macros in top-level libtool.m4
-
-2002-06-05  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/string.h[__linux__]: Add strsignal prototype.
-        * libc/include/sys/lock.h: New file with default locking support.
-        * libc/include/sys/reent.h: Add signal buffer support for strsignal
-        and psignal.
-        * libc/posix/Makefile.am: Add support for readdir_r.c.
-        * libc/posix/Makefile.in: Regenerated.
-        * libc/posix/closedir.c: Add locking support and hash table cleanup.
-        * libc/posix/opendir.c: Add lock support.
-        * libc/posix/readdir.c: Ditto.
-        * libc/posix/rewinddir.c: Ditto.
-        * libc/posix/scandir.c: Ditto.
-        * libc/posix/seekdir.c: Ditto.
-        * libc/posix/telldir.c: Ditto plus add _cleanupdir routine to
-        clean up leftover hash table entries.
-        * libc/posix/readdir_r.c: New file.
-        * libc/sys/linux/Makefile.am: Add psignal.c and strsignal.c support.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/sys/dirent.h: Add dd_lock to DIR structure.
-        * libc/sys/linux/sys/signal.h: Add psignal prototype.
-        * libc/sys/linux/psignal.c: New file.
-        * libc/sys/linux/strsignal.c: Ditto.
-
-2002-06-03  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/types.h: Don't define dev_t when compiling for
-	Cygwin.
-
-2002-05-31  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add sig.c and sigaction.c.  Also
-        make siglist.inc dependent on sig.c instead of signal.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/sig.c: Rename from signal.c and change code to
-        use NSIG instead of _NSIG. 
-        * libc/sys/linux/sigaction.c: New file.
-        * libc/sys/linux/signal.c: Changed to be linux signal() function
-        so as to override regular newlib default signal.c.
-        * libc/sys/linux/machine/i386/Makefile.am: Remove sigset.c.
-        * libc/sys/linux/machine/i386/Makefile.in: Regenerated.
-        * libc/sys/linux/machine/i386/sigset.c: Moved to linux main directory.
-        * libc/sys/linux/sigset.c: Moved from machine/i386 directory.
-        * libc/sys/linux/sys/signal.h: Redefine NSIG to _NSIG and override
-        default linux sigset_t typedef by defining it equal to __sigset_t.
-        * libc/unix/sigset.c: Add check so code isn't compiled on systems
-        with a sigset_t that isn't implemented with a single int.
-
-2002-05-30  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add support for new files.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/ids.c: Add __getuid weak alias for getuid.
-        * libc/sys/linux/signal.c: Change to use real-time syscalls for
-        sigsuspend, sigprocmask, and sigpending.  Also remove sigaction as
-        it is in a separate file now.
-        * libc/sys/linux/machine/i386/Makefile.am
-        * libc/sys/linux/machine/i386/Makefile.in
-        * libc/sys/linux/sys/signal.h: Add include of <bits/signum.h>.
-        * libc/sys/linux/sigaction.c: New file.
-        * libc/sys/linux/sigqueue.c: Ditto.
-        * libc/sys/linux/sigwait.c: Ditto.
-        * libc/sys/linux/machine/i386/sigaction.c: Ditto.
-        * libc/sys/linux/kernel_sigaction.h: Ditto.
-
-2002-05-28  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add support for cfspeed.c and
-        tcsendbrk.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/termios.c: Add tcflow(), tcflush(),
-        tcgetpgrp(), and tcsetpgrp() functions.
-        * libc/sys/linux/sys/termios.h: Add include of machine/termios.h
-        to get __MAX_BAUD rate.
-        * libc/sys/linux/machine/i386/include/termios.h: New file.
-        * libc/include/machine/termios.h: Ditto.
-        * libc/sys/linux/cfspeed.c: Ditto.
-        * libc/sys/linux/tcsendbrk.c: Ditto.
-
-2002-05-24  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/string.h: Add strnlen and strerror_r prototypes.
-        * libc/string/Makefile.am: Add strnlen.c and strerror_r.c support.
-        * libc/string/Makefile.in: Regenerated.
-        * libc/string/strerror_r.c: New file.
-        * libc/string/strnlen.c: New file.
-        * libc/sys/linux/Makefile.am: Add rename.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/rename.c: New file to override default rename.
-
-2002-05-24  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/sys/linux/sys/cdefs.h: Add __weak_reference macros.
-	* libc/sys/linux/sys/time.h: Add conversion macros.
-	* libc/sys/linux/sys/types.h: Add FD_ macros.  Include <bits/types.h>.
-	* libc/sys/linux/ids.c: Add setresuid and syslog syscalls.
-	* libc/sys/linux/gethostname.c: New file.
-	* libc/sys/linux/seteuid.c: New file.
-	* libc/sys/linux/sysctl.c: New file.
-	
-2002-05-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/string/Makefile.am: Add support for strsep.c.
-        * libc/string/Makefile.in: Regenerated.
-        * libc/string/strsep.c: New file.
-        * libc/string/strtok.c: Change to call __strtok_r service routine.
-        * libc/string/strtok_r.c: Add __strtok_r routine which takes
-        additional flag parameter regarding whether to skip leading delimeters.
-        Change strtok_r to call __strtok_r.
-
-2002-05-23  Gareth Pearce  <tilps@hotmail.com>
-
-        * libc/stdio/Makefile.am: Modify to add setbuffer.c and setlinebuf.c.
-        * libc/stdio/Makefile.in: Regenerated.
-        * libc/stdio/setbuffer.c: New file.
-        * libc/stdio/setlinebuf.c: New file.
-
-2002-05-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/Makefile.am: Add resource.c.
-        * libc/sys/linux/Makefile.in: Regenerated.
-        * libc/sys/linux/resource.c: New file.
-        * libc/sys/linux/time.c: Add settimeofday, getitimer, and setitimer.
-        * libc/sys/linux/machine/i386/Makefile.am: Remove syscalls.c.
-        * libc/sys/linux/machine/i386/Makefile.in: Regenerated.
-        * libc/sys/linux/machine/i386/syscalls.c: Removed as functions
-        are now found in libc/sys/linux/resource.c.
-
-2002-05-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/string.h (bcmp, bcopy, bzero): Change prototypes
-        to use void * pointers and comply with Single Unix spec.
-        * libc/string/bcmp.c: Change to use void * instead of char *.
-        * libc/string/bcopy.c: Ditto.
-        * libc/string/bzero.c: Ditto.
-
-2002-05-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/shm_open.c: New file.
-	* libc/sys/linux/shm_unlink.c: Ditto.
-	* libc/sys/linux/Makefile.am: Add support for shm_open.c and
-	shm_unlink.c.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/sys/types.h: Add some additional checks to see
-	if clock_t or time_t is already defined.
-
-2002-05-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * Makefile.am: Don't pass $toollibdir down directly in
-        AM_MAKEFLAGS as it causes all multilibs to use the same toollibdir.
-        Pass it under the name: top_toollibdir.
-        * Makefile.in: Regenerated.
-
-2002-05-22  Corinna Vinschen  <vinschen@redhat.com>
-
-	* libc/include/sys/types.h: Revert previous patch.
-
-2002-05-22  Corinna Vinschen  <vinschen@redhat.com>
-
-	* libc/include/sys/types.h: Include cygwin/types.h always under
-	Cygwin, not only if _POSIX_THREADS is defined.
-
-2002-05-21 Dhananjay Deshpande <dhananjayd@kpit.com>
-
-	* configure.host: Specify sys_dir=h8300hms for h8300-*-coff* target.
-
-2002-05-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Copy and install headers from sys/machine/include
-	directory.  Also pass $toollibdir to lower-level directories.
-	* Makefile.in: Regenerated.
-	* libc/include/stdio.h[!_REENT_ONLY]: Change stdin, stdout, and 
-	stderr to use _REENT macro instead of _impure_ptr directly.
-	* libc/include/sys/config.h[__i386__][__linux__]: Define
-	__DYNAMIC_REENT__.
-	* libc/include/sys/reent.h[!_REENT_ONLY]: Change _REENT macro to be 
-	call to __getreent() function if !__SINGLE_THREAD__ and
-	__DYNAMIC_REENT__ is set.
-	* libc/reent/Makefile.am: Add support for getreent.c.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/string/strerror.c: Add check if EOPNOTSUPP and ENOTSUP are same.
-	* libc/sys/linux/Makefile.am: Add support for new files.
-	* libc/sys/linux/configure.in: Add $EXTRA_DIRS variable.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/configure: Ditto.
-	* libc/sys/linux/io.c: Add poll syscall.  Also weak-alias
-	__close, __read, __write, __poll, __open, __lseek, __fcntl from
-	their __libc_ counterparts.
-	* libc/sys/linux/io64.c: Add __libc_ prefix to lseek64 and open64
-	and weak-alias to regular names.
-	* libc/sys/linux/pread64.c: Rename to __libc_pread64 and weak-alias
-	to pread64 and __pread64.
-	* libc/sys/linux/process.c: Weak_alias __libc_getpid to __getpid.
-	* libc/sys/linux/pwrite64.c: Rename to __libc_pwrite64 and
-	weak-alias to pwrite64.
-	* libc/sys/linux/sched.c: Weak-alias __libc_sched_getparam,
-	__libc_sched_getscheduler, __libc_sched_get_priority_max,
-	__libc_sched_get_priority_min, and __libc_sched_setschedule to
-	name with __ instead of __libc_. 
-	* libc/sys/linux/siglongjmp.c: Include <machine/weakalias.h>.
-	Rename siglongjmp to __libc_siglongjmp and weak-alias to siglongjmp.
-	Call __libc_longjmp instead of longjmp, from __libc_siglongjmp.
-	* libc/sys/linux/signal.c: Rename raise to __libc_raise and weak-alias
-	to raise.
-	* libc/sys/linux/socket.c: Weak-alias __libc_connect to __connect and
-	__libc_send to __send.
-	* libc/sys/linux/time.c: Weak-alias __libc_gettimeofday to
-	__gettimeofday.
-	* libc/sys/linux/wait.c: Rename wait to __libc_wait and weak-alias
-	it to wait.  Rename wait3 to __libc_wait3 and weak-alias it to wait3.
-	* libc/sys/linux/include/setjmp.h: Use __jmp_buf in sigjmp_buf
-	type and typedef __jmp_buf to jmp_buf.
-	* libc/sys/linux/machine/i386/Makefile.am: Add syscalls.c and
-	setjmp.S.
-	* libc/sys/linux/machine/i386/Makefile.in: Regenerated.
-	* libc/sys/linux/machine/i386/crt0.c: Add support to clear .bss
-	section.
-	* libc/sys/linux/machine/i386/socketcall.h: Change to use __libc_
-	prefix for function macros and then use weak_alias() to regular names.
-	* libc/sys/linux/machine/i386/syscall.h: Ditto.
-	* libc/sys/linux/sys/errno.h: Define EOPNOTSUP to be ENOTSUP.
-	* libc/sys/linux/sys/stdio.h: Define _flockfile and _funlockfile
-	to be flockfile() and funlockfile() respectively.
-	* libc/sys/linux/sys/types.h
-	* libc/reent/getreent.c: New file.
-	* libc/sys/linux/flockfile.c: Ditto.
-	* libc/sys/linux/funlockfile.c: Ditto.
-	* libc/sys/linux/getreent.c: Ditto.
-	* libc/sys/linux/pread.c: Ditto.
-	* libc/sys/linux/pwrite.c: Ditto.
-	* libc/sys/linux/raise.c: Ditto.
-	* libc/sys/linux/system.c: Ditto.
-	* libc/sys/linux/tcdrain.c: Ditto.
-	* libc/sys/linux/machine/i386/i386mach.h: Ditto.
-	* libc/sys/linux/machine/i386/setjmp.S: Ditto.
-	* libc/sys/linux/machine/i386/syscalls.c: Ditto.
-	* libc/sys/linux/machine/i386/weakalias.h: Ditto.
-	* libc/sys/linux/machine/i386/include/setjmp.h: Ditto.
-
-2002-05-14 Dhananjay Deshpande <dhananjayd@kpit.com>
-
-	* newlib/libc/sys/h8300hms/Makeile.am (lib_a_SOURCES): Add read.c.
-	* newlib/libc/sys/h8300hms/read.c: New file.  Magic trap 0xC8 for sim.
-	* newlib/libc/sys/h8300hms/syscalls.c: Move _read() to read.c.
-	* newlib/libs/sys/h8300hms/sys/syscall.h: New file.
-
-Thu May 16 17:24:57 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/strcpy.S (strcpy): Replace LITTLE_ENDIAN with
-	__LITTLE_ENDIAN__.  make sure r0 has right value at first loop
-	exit point.
-
-2002-05-15  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* testsuite/lib/newlib.exp: Add newlib_include_flags to compile
-	options when testing natively on i[3456]86-*-linux.
-
-	* testsuite/lib/checkoutput.exp (newlib_check_output): Output
-	only one pass or fail per test file.  Trim \r's from output
-	values received from test programs.  Remove support for named
-	tests.
-	* testsuite/newlib.locale/UTF-8.exp: Update to support new
-	newlib_check_output behaviour.
-	* testsuite/newlib.locale/UTF-8.c: Likewise.
-
-2002-05-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/stdlib.h: Add on_exit prototype.
-        * libc/include/sys/reent.h (struct _atexit): Add argument array
-        and bits to track type of exit routine to support both on_exit
-        and atexit.
-        (_REENT_INIT_PTR): Add missing fields that won't be zeroed out
-        by default and change the setting of the atexit structure.
-        (_REENT_INIT)[!_REENT_SMALL]: Remove extraneous end brace.
-        * libc/stdlib/on_exit.c: New file.
-        * libc/stdlib/Makefile.am: Add support for on_exit.
-        * libc/stdlib/Makefile.in: Regenerated.
-        * libc/stdlib/atexit.c: Change to initialize types field.
-        * libc/stdlib/exit.c: Change to look at types field for each
-        exit routine and either call an atexit-style or an on_exit-style
-        routine accordingly.
-
-2002-05-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/machine/powerpc/vfprintf.c(__VFPRINTF_R)[__ALTIVEC__]: Don't
-        allow v specifier with n or L specifiers.  For vector c format,
-        move tmp declaration to the top.
-
-2002-05-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/machine/powerpc/vfprintf.c(__VFPRINTF_R)[__ALTIVEC__]: Restore
-        the original format specifier when looping for vectors to compensate
-        for any changes made in vector %g format processing.
-        Also add syntax checking for various invalid scenarios
-        involving vector format extensions.
-        * libc/machine/powerpc/vfscanf.c(__VFSCANF_R)[__ALTIVEC__]: Fix
-        return code setting for vector formats.  Also treat vector
-        separator mismatch as a match error instead of an input error.
-        Perform some syntax checking for vector formats.
-
-2002-05-10  Mark Bradshaw  <bradshaw@staff.crosswalk.com>
-
-	* libc/include/string.h (!__STRICT_ANSI__): Add strlcat and strlcpy.
-	* libc/string/Makefile.am: Add strlcat.c and strlcpy.c.
-	* libc/string/strlcat.c: New file.
-	* libc/string/strlcpy.c: New file.
-
-2002-05-10  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/string/strchr.c: Fix comment typo.
-
-2002-05-08  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* acinclude.m4: Add support for --enable-newlib-multithread.
-	* configure.host (newlib_cflags): Add -D__SINGLE_THREAD__ if
-	--enable-newlib-multithread=no.
-
-	* libc/stdio/getc_u.c: New file.
-	* libc/stdio/getchar_u.c: New file.
-	* libc/stdio/putc_u.c: New file.
-	* libc/stdio/putchar_u.c: New file.
-	* libc/include/stdio.h: Add declarations for getc_unlocked,
-	getchar_unlocked, putc_unlocked and putchar_unlocked.
-	* libc/stdio/Makefile.am (LIB_SOURCES): Add new files.
-	(CHEWOUT_FILES): Add new files' .def's.
-	* libc/stdio/putchar.c (_putchar_r): Replace __sputc with putc.
-
-Wed May  8 17:47:35 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/memset.S (memset, __SHMEDIA__ code):
-	Also handle as single quad word when destination ends at last
-	byte of first quad word.  Fix byte selection in single quad code.
-
-2002-05-07  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/sys/stdio.h: New file.
-	* libc/sys/linux/sys/stdio.h: New file.
-	* libc/include/stdio.h: Add declarations for flockfile,
-	ftrylockfile, and funlockfile.  Include <sys/stdio.h>.
-	* libc/stdio/clearerr.c: Add file locking.
-	* libc/stdio/fclose.c: Likewise.
-	* libc/stdio/feof.c: Likewise.
-	* libc/stdio/ferror.c: Likewise.
-	* libc/stdio/fflush.c: Likewise.
-	* libc/stdio/fgetc.c: Likewise.
-	* libc/stdio/fgetpos.c: Likewise.
-	* libc/stdio/fgets.c: Likewise.
-	* libc/stdio/fileno.c: Likewise.
-	* libc/stdio/fputc.c: Likewise.
-	* libc/stdio/fputs.c: Likewise.
-	* libc/stdio/fread.c: Likewise.
-	* libc/stdio/freopen.c: Likewise.
-	* libc/stdio/fseek.c: Likewise.
-	* libc/stdio/ftell.c: Likewise.
-	* libc/stdio/fwrite.c: Likewise.
-	* libc/stdio/getc.c: Likewise.
-	* libc/stdio/putc.c: Likewise.
-	* libc/stdio/setvbuf.c: Likewise.
-	* libc/stdio/ungetc.c: Likewise.
-	* libc/stdio/vfprintf.c: Likewise.
-
-2002-05-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/powerpc/vfprintf.c[__ALTIVEC__]: Add vector
-	support for 'p' format.  Fix code to print bytes for vector
-	integer formats that do not specify 'h' or 'l'.
-	* libc/machine/powerpc/vfscanf.c[__ALTIVEC__]: Add vector support
-	for 'p' specifier.  Fix code to scan 16 bytes for vector integer
-	formats that do not specify 'h' or 'l'.
-
-	* libc/include/stdlib.h (a64l, l64a, _l64a_r): Added prototypes.
-
-2002-05-06  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/sys/arm/syscalls.c (_rename): Add parameter names.
-	(_sbrk): Add cast of return value.
-
-2002-05-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  libc/include/sys/reent.h (_l64a_buf): New reentrant area.
-	(_REENT_L64A_BUF): New macro for accessing area.
-	*  libc/stdlib/Makefile.am: Add a64l.c and l64a.c.
-	*  libc/stdlib/Makefile.in: Regenerated.
-	*  libc/stdlib/a64l.c: New file.
-	*  libc/stdlib/l64a.c: New file.
-
-2002-05-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/unix/pread.c: Fix typo for _pread_r.
-        * libc/unix/pwrite.c: Fix type for _pwrite_r.
-        * libc/sys/linux/pread64.c: Fix typo for read syscall.
-        * libc/sys/linux/pwrite64.c: Fix typo for write syscall.
-
-2002-05-03  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/unistd.h: Define getdomainname under cygwin.
-
-2002-05-03  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.in (CC_FOR_NEWLIB): Change -isystem's to -I's.
-
-2002-05-01  Christopher Faylor  <cgf@redhat.com>
-
-	* utmp.h: Define more UNIX constants.
-
-2002-05-01  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* Makefile.am: Add support for checking multilibs.
-
-	* libc/Makefile.am (SUBLIBS): Add LIBC_EXTRA_LIB.
-	(SUBDEFS): Add LIBC_EXTRA_DEF.
-	* libc/configure.in (LIBC_EXTRA_LIB): New variable.
-	(LIBC_EXTRA_DEF): Likewise.
-	(extra_dir): Likewise.
-	* libc/machine/xscale/machine: New directory.
-	* libc/machine/xscale/machine/profile.h: New file.
-
-	* Makefile.am (site.exp): Remove newlib_cflags.  Add
-	multibuildtop.
-	* testsuite/newlib.locale/UTF-8.c: Change fprintf's to printf's.
-	* testsuite/lib/flags.exp: New file.
-	* testsuite/lib/newlib.exp: Load flags.exp.
-	(newlib_target_compile): Remove libgloss directory references.
-	(newlib_init): Remove newlib_cflags references.
-
-2002-04-30  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* testsuite/lib/newlib.exp (newlib_target_compile): Change
-	method of finding libgloss_target_dir.
-
-	* Makefile.am (site.exp): Change host_alias, host_triplet,
-	target_alias, target_triplet to refer to gcc's host and target
-	variables (newlib's build and host variables).
-	* testsuite/lib/newlib.exp (newlib_init): Change build
-	references to host references, host references to target
-	references to reflect Makefile.am changes.
-	(newlib_target_compile): Likewise.
-	(newlib_finish): Likewise.
-
-2002-04-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/io64.c (fstat64, lstat64): New syscalls added.
-
-2002-04-29  Jonathan Larmour  <jlarmour@redhat.com>
-
-	* libc/sys/arm/syscalls.c (_rename): New function. Just a stub.
-	(_system): New function. Ditto.
-	* libc/stdlib/system.c (_system_r): Call _system if HAVE_SYSTEM.
-	* configure.host: define HAVE_SYSTEM and HAVE_RENAME for xscale
-	targets.
-
-2002-04-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-        *  libc/include/sys/unistd.h (pread, pwrite): Added prototypes.
-        *  libc/unix/Makefile.am: Add pread.c and pwrite.c.
-        *  libc/sys/linux/Makefile.am: Add pread64.c and pwrite64.c.
-        *  libc/sys/linux/Makefile.in: Regenerated.
-        *  libc/unix/Makefile.in: Ditto.
-        *  libc/sys/linux/pread64.c: New file.
-        *  libc/sys/linux/pwrite64.c: Ditto.
-        *  libc/unix/pread.c: Ditto.
-        *  libc/unix/pwrite.c: Ditto.
-
-2002-04-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  libc/sys/linux/Makefile.am: Add io64.c.
-	*  libc/sys/linux/Makefile.in: Regenerated.
-	*  libc/sys/linux/io.c(mkfifo, fsync, fdatasync): Added syscalls.
-	*  libc/sys/linux/signal.c (sigwaitinfo, sigtimedwait): Ditto. 
-	*  libc/sys/linux/io64.c: New file.
-
-2002-04-26  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.in (CC_FOR_NEWLIB): New variable that
-	bases on $(CC) and adds targ-include and libc/include as
-	-isystem directives if they are not already part of $(CC).
-	* Makefile.am (AM_MAKEFLAGS): Change setting of CC to equal
-	$(CC_FOR_NEWLIB).
-	* configure: Regenerated.
-	* Makefile.in: Ditto.
-
-2002-04-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  libc/sys/linux/Makefile.am: Add support for sched.c.
-	*  libc/sys/linux/Makefile.in: Regenerated.
-	*  libc/sys/linux/sched.c: New file.
-	*  libc/sys/linux/sys/types.h: Add struct timespec.
-
-2002-04-25  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.in (CC_FOR_BUILD): Set to gcc whether
-	cross-compiling or not.
-	(CC): Add -isystem's for targ-include and libc/include when they
-	do not already appear in CC.
-
-2002-04-24  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* Makefile.am (check-DEJAGNU): New target.
-	(site.exp): Likewise.
-	* acinclude.m4 (NEWLIB_CONFIGURE): Replace AC_CANONICAL_HOST
-	with AC_CANONICAL_SYSTEM.  Remove AC_CANONICAL_BUILD.
-	* libc/locale/locale.c (_setlocale_r): Add UTF-8 support.
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): Likewise.
-	* libc/stdlib/wctomb_r.c (_wctomb_r): Likewise.
-	* testsuite: New directory.
-	* testsuite/config: Likewise.
-	* testsuite/lib: Likewise.
-	* testsuite/newlib.locale: Likewise.
-	* testsuite/newlib.string: Likewise.
-	* testsuite/config/default.exp: New file.
-	* testsuite/lib/checkoutput.exp: New file.
-	* testsuite/lib/newlib.exp: New file.
-	* testsuite/lib/passfail.exp: New file.
-	* testsuite/newlib.locale/UTF-8.c: New file.
-	* testsuite/newlib.locale/UTF-8.exp: New file.
-	* testsuite/newlib.locale/locale.exp: New file.
-	* testsuite/newlib.string/string.exp: New file.
-	* testsuite/newlib.string/tstring.c: New file.
-
-2002-04-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-        *  libc/include/machine/types.h (__pid_t, __off_t, __loff_t): Added.
-        *  libc/sys/linux/Makefile.am: Add support for mmap.c.
-        *  libc/sys/linux/Makefile.in: Regenerated.
-        *  libc/sys/linux/mmap.c: New file.
-        *  libc/sys/linux/machine/i386/syscall.h: Add _syscall6 macro.
-        *  libc/sys/linux/sys/types.h (pid_t, off_t, loff_t): Added.
-
-2002-04-22  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* acinclude.m4 (newlib_cflags): Remove include directories that
-	are already specified in the top-level configure.in's FLAGS_FOR_TARGET.
-
-2002-04-19  Bill Siegmund  <ctc-dsl@pacbell.net>
-
-	* libc/machine/xscale/memchr.c: Don't use multi-line strings.
-	* libc/machine/xscale/memcmp.c: Ditto.
-	* libc/machine/xscale/memcpy.c: Ditto.
-	* libc/machine/xscale/memmove.c: Ditto.
-	* libc/machine/xscale/memset.c: Ditto.
-	* libc/machine/xscale/strchr.c: Ditto.
-	* libc/machine/xscale/strcmp.c: Ditto.
-	* libc/machine/xscale/strcpy.c: Ditto.
-	* libc/machine/xscale/strlen.c: Ditto.
-
-2002-04-19  Alexandre Oliva  <aoliva@redhat.com>
-
-        * libc/include/sys/config.h: Remove include of <limits.h>.
-        (__INT_MAX__, __LONG_MAX__): Define like GCC's limits.h would
-        define INT_MAX and LONG_MAX.  Use them in tests.
-
-2002-04-19  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  configure.host: Add support for powerpc-eabialtivec*.
-	*  libc/include/malloc.h: Add include of <machine/malloc.h>.
-	*  libc/include/stdlib.h: Add include of <machine/stdlib.h>.
-	*  libc/include/machine/malloc.h: New file.
-	*  libc/include/machine/stdlib.h: Ditto.
-	*  libc/include/machine/setjmp.h: Add support for powerpc altivec.
-	*  libc/machine/powerpc/Makefile.am: Add conditional objects and
-	sources based on configuration.
-	*  libc/machine/powerpc/Makefile.in: Regenerated.
-	*  libc/machine/powerpc/configure: Ditto.
-	*  libc/machine/powerpc/configure.in: Add check for
-	powerpc-eabialtivec* in which case add in additional source files.
-	*  libc/machine/powerpc/setjmp.S: Add altivec support.
-	*  libc/machine/powerpc/vec_calloc.c: New file.
-	*  libc/machine/powerpc/vec_free.c: Ditto.
-	*  libc/machine/powerpc/vec_malloc.c: Ditto.
-	*  libc/machine/powerpc/vec_mallocr.c: Ditto.
-	*  libc/machine/powerpc/vec_realloc.c: Ditto.
-	*  libc/machine/powerpc/machine/malloc.h: Ditto.
-	*  libc/machine/powerpc/machine/stdlib.h: Ditto.
-	*  libc/machine/powerpc/vfprintf.c: New file that is vfprintf.c
-	with added altivec format specifiers.
-	*  libc/machine/powerpc/vfscanf.c: New file that is vfscanf.c with
-	added altivec format specifiers.
-
-2002-04-19	Joel Sherrill <joel@OARcorp.com>
-
-	* libs/sys/rtems/crt0.c: Satisfy gcc's references to libc functions
-	while autoconf is trying to link main(){}.
-
-2002-04-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/linux/signal.c: Remove include of <bits/sigset.h>.
-        * libc/sys/linux/sys/signal.h: Add include of <bits/sigset.h>.
-
-2002-04-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/time/time.tex: Add tzset info.
-
-2002-04-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/time.h (tzset, _tzset_r): Added prototypes.
-	(strptime): Moved prototype to be within !__STRICT_ANSI__.
-	(_tzname, _daylight, _timezone): No long __CYGWIN__ only.
-	(tzname): Defined for all platforms.
-	(daylight, timezone): Defined only for CYGWIN.
-	* libc/sys/linux/machine/i386/crt0.c: Add call to tzset() after
-	environment set up.
-	* libc/stdlib/setenv_r.c (_setenv_r): Call tzset() if the TZ
-	environment variable is set.
-	* libc/time/Makefile.am: Add support for tzset.c, tzlock.c, and
-	tzset_r.c.
-	* libc/time/Makefile.in: Regenerated.
-	* libc/time/gmtime.c (gmtime): Changed to call gmtime_r.
-	* libc/time/gmtime_r.c (gmtime_r): Changed to call _mktm_r.
-	* libc/time/lcltime_r.c (lcltime_r): Ditto.
-	* libc/time/local.h: New local header file.
-	* libc/time/mktime.c (mktime): Add timezone support.
-	* libc/time/mktm_r.c: New file which is the common engine
-	for gmtime_r and lcltime_r.  This code has timezone support.
-	* libc/time/strftime.c (strftime): Add %Z timezone support.
-	* libc/time/tzlock.c: New file containing timezone lock stubs.
-	* libc/time/tzset.c: New file containing tzset() routine.
-	* libc/time/tzset_r.c: New file containing _tzset_r and
-	internal routine for calculating timezone changes for specified year.
-
-2002-04-17  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.in (CRT0_DIR): Set to libc/.
-	(CRT1_DIR): Set to ${crt1_dir}/ if crt1_dir is non-empty.
-	* Makefile.am: Change all occurrences of $(CRT0_DIR)/$(CRT0) to
-	$(CRT0_DIR)$(CRT0) to prevent make warnings.  Likewise for
-	$(CRT1_DIR)/$(CRT1).
-	* libc/machine/xstormy16/Makefile.in: Regenerated.
-	* libc/machine/xstormy16/aclocal.m4: Regenerated.
-	* libc/machine/xstormy16/configure: Regenerated.
-
-2002-04-13  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/stdlib/mallocr.c (malloc_extend_top): If correction sbrk
-	fails, don't bail out, and try to correct next time.
-
-	* libc/include/sys/config.h: Include limits.h.
-
-2002-04-12  Eric Norum  <eric.norum@usask.com>
-
-	* libc/sys/rtems/crt0.c (rtems_gxx_mutex_init): Dummy
-	routine to allow autoconf to determine that building executables
-	for rtems works.
-	(rtems_gxx_mutex_lock, rtems_gxx_mutex_unlock): Ditto.
-	(rtems_gxx_mutex_once): Ditto.
-
-2002-04-09  Tom Rix  <trix@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT_PTR): Fix typo.
-
-2002-04-09  Mark Bradshaw  <bradshaw@staff.crosswalk.com>
-
-        * libc/include/time.h: Fix strptime declaration.
-        * libc/time/Makefile.am: Add strptime.c.
-	* libc/time/Makefile.in: Regenerated.
-        * libc/time/strptime.c: New file.
-
-2002-04-08  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/include/setjmp.h: Add sigjmp_buf type,
-	siglongjmp prototype, and sigsetjmp macro definition.
-	* libc/sys/linux/siglongjmp.c: New file.
-	* libc/sys/linux/Makefile.am: Add support for siglongjmp.
-	* libc/sys/linux/Makefile.in: Regenerated.
-
-2002-04-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Add support for installing crt1.o if one exists.
-	* configure.host: Specify crt1.o for linux.
-	* configure.in: Expose CRT1 and CRT1_DIR for Makefile.am to use.
-	* Makefile.in: Regenerated.
-	* configure: Ditto.
-	* libc/include/sys/unistd.h (_SC_STREAM_MAX, _SC_PRIORITY_SCHEDULING):
-	Added for non-Cygwin, non-RTEMS configurations.
-	* libc/sys/linux/Makefile.am: Add support for crt1 and sysconf.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/crt1.c: New empty file to override one defaulted
-	by gcc.  This fixes problem with reconfiguring linux newlib build.
-	* libc/sys/linux/sysconf.c: New file.
-
-2002-04-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Add support for machine subdirectory of
-	sys subdirectory.
-	* configure.in: Add check for sys machine subdirectory.
-	* Makefile.am: Ditto.
-	* configure: Regenerated.
-	* Makefile.in: Ditto.
-	* libc/sys/linux/crt0.c: Moved to machine/i386 directory.
-	* libc/sys/linux/sys/syscall.h: Ditto.
-	* libc/sys/linux/sleep.c: New file.
-	* libc/sys/linux/socket.c: Ditto.
-	* libc/sys/linux/sockops.h: Ditto.
-	* libc/sys/linux/stack.c: Ditto.
-	* libc/sys/linux/usleep.c: Ditto.
-	* libc/sys/linux/machine/Makefile.am: Ditto.
-	* libc/sys/linux/machine/Makefile.in: Ditto.
-	* libc/sys/linux/machine/aclocal.m4: Ditto.
-	* libc/sys/linux/machine/configure: Ditto.
-	* libc/sys/linux/machine/configure.in: Ditto.
-	* libc/sys/linux/machine/i386/Makefile.am: Ditto.
-	* libc/sys/linux/machine/i386/Makefile.in: Ditto.
-	* libc/sys/linux/machine/i386/aclocal.m4: Ditto.
-	* libc/sys/linux/machine/i386/configure: Ditto.
-	* libc/sys/linux/machine/i386/configure.in: Ditto.
-	* libc/sys/linux/machine/i386/crt0.c: Ditto.
-	* libc/sys/linux/machine/i386/sigset.c: Ditto.
-	* libc/sys/linux/machine/i386/sigstack.h: Ditto.
-	* libc/sys/linux/machine/i386/socketcall.h: Ditto.
-	* libc/sys/linux/machine/i386/syscall.h: Ditto.
-	* libc/sys/linux/sys/select.h: Ditto.
-	* libc/sys/linux/configure.in: Add support for machine directory.
-	* libc/sys/linux/Makefile.am: Ditto plus add new files above.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/configure: Ditto.
-	* libc/sys/linux/brk.c: Use machine/syscall.h instead of sys/syscall.h.
-	* libc/sys/linux/inode.c: Ditto.
-	* libc/sys/linux/linux.c: Ditto.
-	* libc/sys/linux/process.c: Ditto.
-	* libc/sys/linux/systat.c: Ditto.
-	* libc/sys/linux/time.c: Ditto.
-	* libc/sys/linux/wait.c: Ditto.
-	* libc/sys/linux/ids.c: Change header plus add setfsgid/setfsuid.
-	* libc/sys/linux/io.c: Change header plus add readv/writev.
-	* libc/sys/linux/signal.c: Change header plus change sigsuspend to
-	use __sigsuspend syscall.
-	* libc/sys/linux/select.c: Change header plus change select to
-	use _newselect syscall.
-	* libc/sys/linux/sys/cdefs.h: Add a number of standard definitions
-	used by glibc header files.
-	* libc/sys/linux/sys/types.h: Add __socklen_t and __useconds_t
-	types.
-
-2002-04-01  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT_PTR): New macro for
-	initializing a struct _reent that has been dynamically allocated.
-	(_REENT_CHECK_MISC): New macro that checks _misc struct for
-	_REENT_SMALL and does nothing otherwise.
-	(_REENT_STRTOK_LAST): New macro for reentrant strtok.
-	(_REENT_MBLEN_STATE): New macro for reentrant mblen.
-	(_REENT_MBTOWC_STATE): New macro for reentrant mbtowc.
-	(_REENT_WCTOMB_STATE): New macro for reentrant wctomb.
-	[_REENT_SMALL](struct _misc_reent): New structure containing
-	miscellaneous reentrant areas needed by newlib.
-	[_REENT_SMALL](struct _reent): Add _misc pointer.
-	[_REENT_SMALL](_REENT_INIT_MISC): New macro.
-	* libc/string/strtok (strtok): Change to use _REENT_CHECK_MISC
-	and _REENT_STRTOK_LAST macros.
-	* libc/stdlib/mblen (mblen): Change to use _REENT_CHECK_MISC
-	and _REENT_MBLEN_STATE macros.
-	* libc/stdlib/mbtowc (mbtowc): Change to use _REENT_CHECK_MISC
-	and _REENT_MBTOWC_STATE macros.
-	* libc/stdlib/wctomb (wctomb): Change to use _REENT_CHECK_MISC
-	and _REENT_WCTOMB_STATE macros.
-
-2002-04-01  Till Straumann <strauman@SLAC.Stanford.EDU>
-
-	* libc/stdlib/getenv_r.c (_findenv_r): Add missing ENV_UNLOCK.
-
-Wed Mar 27 07:34:44 2002  Jason Tishler <jason@tishler.net>
-
-	* libc/include/sys/features.h (_POSIX_SEMAPHORES): New Cygwin define.
-
-Tue Mar 26 17:17:10 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/memcpy.S (Large): Fix alignment rounding.
-	Store high part of leading bytes too.
-
-2002-03-22  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libm/math/ef_hypot.c: Increase scale factor to 68.
-
-2002-03-13  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/machine/mips/strlen.c (strlen) [__mips16]: Fix off-by-two
-	error.
-
-2002-03-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/go32/access.c: Change license to relaxed license
-        used in identical file throughout newlib/libgloss.
-
-2002-03-12  Richard Earnshaw  <rearnsha@arm.com>
-
-	* libc/sys/arm/access.c: New file.
-	* libc/sys/arm/Makefile.am (lib_a_SOURCES): Add access.c.
-	* libc/sys/arm/Makefile.in: Regenerate.
-	* libc/sys/arm/syscalls.c (_stat): New function.
-
-2002-03-11  Michael Meissner  <meissner@redhat.com>
-
-	* libc/machine/mips/Makefile.am (lib_a_SOURCES): Add Mips specific
-	variants strlen.c, strcmp.c, strncpy.c, memset.c and memcpy.c.
-	* libc/machine/mips/Makefile.in: Regenerate.
-	* libc/machine/mips/memcpy.c: New file, optimized for MIPS.
-	* libc/machine/mips/memset.c: Dito.
-	* libc/machine/mips/strcmp.c: Dito.
-	* libc/machine/mips/strlen.c: Dito.
-	* libc/machine/mips/strncmp.c: Dito.
-
-2002-03-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/i386/Makefile.am: Add $(oext) for setjmp
-	object so it works for shared library or statici library.
-2002-04-17  Jeff Johnston  <jjohnstn@redhat.com>
-
-	*  libc/include/time.h (tzset, _tzset_r): Added prototypes.
-	(strptime): Moved prototype to be within !__STRICT_ANSI__.
-	(_tzname, _daylight, _timezone): No long __CYGWIN__ only.
-	(tzname): Defined for all platforms.
-	(daylight, timezone): Defined only for CYGWIN.
-	*  libc/sys/linux/machine/i386/crt0.c: Add call to tzset() after
-	environment set up.
-	* libc/stdlib/setenv_r.c (_setenv_r): Call tzset() if the TZ
-	environment variable is set.
-	*  libc/time/Makefile.am: Add support for tzset.c, tzlock.c, and
-	tzset_r.c.
-	*  libc/time/Makefile.in: Regenerated.
-	*  libc/time/gmtime.c (gmtime): Changed to call gmtime_r.
-	*  libc/time/gmtime_r.c (gmtime_r): Changed to call _mktm_r.
-	*  libc/time/lcltime_r.c (lcltime_r): Ditto.
-	*  libc/time/local.h: New local header file.
-	*  libc/time/mktime.c (mktime): Add timezone support.
-	*  libc/time/mktm_r.c: New file which is the common engine
-	for gmtime_r and lcltime_r.  This code has timezone support.
-	*  libc/time/strftime.c (strftime): Add %Z timezone support.
-	*  libc/time/tzlock.c: New file containing timezone lock stubs.
-	*  libc/time/tzset.c: New file containing tzset() routine.
-	*  libc/time/tzset_r.c: New file containing _tzset_r and
-	internal routine for calculating timezone changes for specified year.
-
-2002-04-17  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.in (CRT0_DIR): Set to libc/.
-	(CRT1_DIR): Set to ${crt1_dir}/ if crt1_dir is non-empty.
-	* Makefile.am: Change all occurrences of $(CRT0_DIR)/$(CRT0) to
-	$(CRT0_DIR)$(CRT0) to prevent make warnings.  Likewise for
-	$(CRT1_DIR)/$(CRT1).
-	* libc/machine/xstormy16/Makefile.in: Regenerated.
-	* libc/machine/xstormy16/aclocal.m4: Regenerated.
-	* libc/machine/xstormy16/configure: Regenerated.
-
-2002-04-13  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/stdlib/mallocr.c (malloc_extend_top): If correction sbrk
-	fails, don't bail out, and try to correct next time.
-
-	* libc/include/sys/config.h: Include limits.h.
-
-2002-04-12  Eric Norum  <eric.norum@usask.com>
-
-	* libc/sys/rtems/crt0.c (rtems_gxx_mutex_init): Dummy
-	routine to allow autoconf to determine that building executables
-	for rtems works.
-	(rtems_gxx_mutex_lock, rtems_gxx_mutex_unlock): Ditto.
-	(rtems_gxx_mutex_once): Ditto.
-
-2002-04-09  Tom Rix  <trix@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT_PTR): Fix typo.
-
-2002-04-09  Mark Bradshaw  <bradshaw@staff.crosswalk.com>
-
-        * libc/include/time.h: Fix strptime declaration.
-        * libc/time/Makefile.am: Add strptime.c.
-	* libc/time/Makefile.in: Regenerated.
-        * libc/time/strptime.c: New file.
-
-2002-04-08  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/linux/include/setjmp.h: Add sigjmp_buf type,
-	siglongjmp prototype, and sigsetjmp macro definition.
-	* libc/sys/linux/siglongjmp.c: New file.
-	* libc/sys/linux/Makefile.am: Add support for siglongjmp.
-	* libc/sys/linux/Makefile.in: Regenerated.
-
-2002-04-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Add support for installing crt1.o if one exists.
-	* configure.host: Specify crt1.o for linux.
-	* configure.in: Expose CRT1 and CRT1_DIR for Makefile.am to use.
-	* Makefile.in: Regenerated.
-	* configure: Ditto.
-	* libc/include/sys/unistd.h (_SC_STREAM_MAX, _SC_PRIORITY_SCHEDULING):
-	Added for non-Cygwin, non-RTEMS configurations.
-	* libc/sys/linux/Makefile.am: Add support for crt1 and sysconf.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/crt1.c: New empty file to override one defaulted
-	by gcc.  This fixes problem with reconfiguring linux newlib build.
-	* libc/sys/linux/sysconf.c: New file.
-
-2002-04-03  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Add support for machine subdirectory of
-	sys subdirectory.
-	* configure.in: Add check for sys machine subdirectory.
-	* Makefile.am: Ditto.
-	* configure: Regenerated.
-	* Makefile.in: Ditto.
-	* libc/sys/linux/crt0.c: Moved to machine/i386 directory.
-	* libc/sys/linux/sys/syscall.h: Ditto.
-	* libc/sys/linux/sleep.c: New file.
-	* libc/sys/linux/socket.c: Ditto.
-	* libc/sys/linux/sockops.h: Ditto.
-	* libc/sys/linux/stack.c: Ditto.
-	* libc/sys/linux/usleep.c: Ditto.
-	* libc/sys/linux/machine/Makefile.am: Ditto.
-	* libc/sys/linux/machine/Makefile.in: Ditto.
-	* libc/sys/linux/machine/aclocal.m4: Ditto.
-	* libc/sys/linux/machine/configure: Ditto.
-	* libc/sys/linux/machine/configure.in: Ditto.
-	* libc/sys/linux/machine/i386/Makefile.am: Ditto.
-	* libc/sys/linux/machine/i386/Makefile.in: Ditto.
-	* libc/sys/linux/machine/i386/aclocal.m4: Ditto.
-	* libc/sys/linux/machine/i386/configure: Ditto.
-	* libc/sys/linux/machine/i386/configure.in: Ditto.
-	* libc/sys/linux/machine/i386/crt0.c: Ditto.
-	* libc/sys/linux/machine/i386/sigset.c: Ditto.
-	* libc/sys/linux/machine/i386/sigstack.h: Ditto.
-	* libc/sys/linux/machine/i386/socketcall.h: Ditto.
-	* libc/sys/linux/machine/i386/syscall.h: Ditto.
-	* libc/sys/linux/sys/select.h: Ditto.
-	* libc/sys/linux/configure.in: Add support for machine directory.
-	* libc/sys/linux/Makefile.am: Ditto plus add new files above.
-	* libc/sys/linux/Makefile.in: Regenerated.
-	* libc/sys/linux/configure: Ditto.
-	* libc/sys/linux/brk.c: Use machine/syscall.h instead of sys/syscall.h.
-	* libc/sys/linux/inode.c: Ditto.
-	* libc/sys/linux/linux.c: Ditto.
-	* libc/sys/linux/process.c: Ditto.
-	* libc/sys/linux/systat.c: Ditto.
-	* libc/sys/linux/time.c: Ditto.
-	* libc/sys/linux/wait.c: Ditto.
-	* libc/sys/linux/ids.c: Change header plus add setfsgid/setfsuid.
-	* libc/sys/linux/io.c: Change header plus add readv/writev.
-	* libc/sys/linux/signal.c: Change header plus change sigsuspend to
-	use __sigsuspend syscall.
-	* libc/sys/linux/select.c: Change header plus change select to
-	use _newselect syscall.
-	* libc/sys/linux/sys/cdefs.h: Add a number of standard definitions
-	used by glibc header files.
-	* libc/sys/linux/sys/types.h: Add __socklen_t and __useconds_t
-	types.
-
-2002-04-01  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT_PTR): New macro for
-	initializing a struct _reent that has been dynamically allocated.
-	(_REENT_CHECK_MISC): New macro that checks _misc struct for
-	_REENT_SMALL and does nothing otherwise.
-	(_REENT_STRTOK_LAST): New macro for reentrant strtok.
-	(_REENT_MBLEN_STATE): New macro for reentrant mblen.
-	(_REENT_MBTOWC_STATE): New macro for reentrant mbtowc.
-	(_REENT_WCTOMB_STATE): New macro for reentrant wctomb.
-	[_REENT_SMALL](struct _misc_reent): New structure containing
-	miscellaneous reentrant areas needed by newlib.
-	[_REENT_SMALL](struct _reent): Add _misc pointer.
-	[_REENT_SMALL](_REENT_INIT_MISC): New macro.
-	* libc/string/strtok (strtok): Change to use _REENT_CHECK_MISC
-	and _REENT_STRTOK_LAST macros.
-	* libc/stdlib/mblen (mblen): Change to use _REENT_CHECK_MISC
-	and _REENT_MBLEN_STATE macros.
-	* libc/stdlib/mbtowc (mbtowc): Change to use _REENT_CHECK_MISC
-	and _REENT_MBTOWC_STATE macros.
-	* libc/stdlib/wctomb (wctomb): Change to use _REENT_CHECK_MISC
-	and _REENT_WCTOMB_STATE macros.
-
-2002-04-01  Till Straumann <strauman@SLAC.Stanford.EDU>
-
-	* libc/stdlib/getenv_r.c (_findenv_r): Add missing ENV_UNLOCK.
-
-Wed Mar 27 07:34:44 2002  Jason Tishler <jason@tishler.net>
-
-	* libc/include/sys/features.h (_POSIX_SEMAPHORES): New Cygwin define.
-
-Tue Mar 26 17:17:10 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/memcpy.S (Large): Fix alignment rounding.
-	Store high part of leading bytes too.
-
-2002-03-22  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libm/math/ef_hypot.c: Increase scale factor to 68.
-
-2002-03-13  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/machine/mips/strlen.c (strlen) [__mips16]: Fix off-by-two
-	error.
-
-2002-03-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/sys/go32/access.c: Change license to relaxed license
-        used in identical file throughout newlib/libgloss.
-
-2002-03-12  Richard Earnshaw  <rearnsha@arm.com>
-
-	* libc/sys/arm/access.c: New file.
-	* libc/sys/arm/Makefile.am (lib_a_SOURCES): Add access.c.
-	* libc/sys/arm/Makefile.in: Regenerate.
-	* libc/sys/arm/syscalls.c (_stat): New function.
-
-2002-03-11  Michael Meissner  <meissner@redhat.com>
-
-	* libc/machine/mips/Makefile.am (lib_a_SOURCES): Add Mips specific
-	variants strlen.c, strcmp.c, strncpy.c, memset.c and memcpy.c.
-	* libc/machine/mips/Makefile.in: Regenerate.
-	* libc/machine/mips/memcpy.c: New file, optimized for MIPS.
-	* libc/machine/mips/memset.c: Dito.
-	* libc/machine/mips/strcmp.c: Dito.
-	* libc/machine/mips/strlen.c: Dito.
-	* libc/machine/mips/strncmp.c: Dito.
-
-2002-03-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/i386/Makefile.am: Add $(oext) for setjmp
-	object so it works for shared library or statici library.
-	* libc/machine/i386/Makefile.in: Regenerated.
-
-Wed Mar  6 10:24:26 2002  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* libc/machine/sh/Makefile.am (lib_a_SOURCES, SH64 case):
-	Add memcpy.S, memset.S and strcpy.S.
-	* libc/machine/sh/Makefile.in: Regenerate.
-	* libc/machine/sh/asm.h (_ENTRY): Set SH5 alignment to 8 bytes.
-	(SHHI, SHLO): Define.
-	* libc/machine/sh/memset.S: Add code for SH5.
-	* libc/machine/sh/memset.S: Likewise.
-	* libc/machine/sh/strcpy.S: Likewise.
-
-2002-02-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Add check for --disable-newlib-io-float
-	configuration option and add -DNO_FLOATING_POINT to newlib cflags
-	if appropriate.
-	* acinclude.m4: Added --disable-newlib-io-float option.
-	* aclocal.m4: Regenerated.
-	* configure: Ditto.
-	* doc/aclocal.m4 doc/configure libc/aclocal.m4 libc/configure
-	* libc/*/aclocal.m4 libc/*/configure 
-	* libm/*/aclocal.m4 libm/*/configure: Ditto.
-	* libc/stdio/vfprintf.c [!INTEGER_ONLY]: Only set FLOATING_POINT
-	if NO_FLOATING_POINT flag is not defined.
-
-2002-02-25  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/config.h: Add __extension__ in front of
-	long long references.
-
-2002-02-23  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/stat.h (_fstat): Don't declare when compiling Cygwin.
-	(_stat): Ditto.
-
-2002-02-23  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/sys/dirent.h (struct __DIR): Use __off32_t instead
-	of off_t.
-
-2002-02-20  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/machine/xscale/strchr.c (strchr): Add 'r1' to the list of
-	clobbered registers.
-
-2002-02-19  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* configure.host (newlib_cflags): When host is in m68* add
-	-DCOMPACT_CTYPE.
-
-2002-02-15  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/include/sys/config.h: Add definitions for
-        __int16_t, __uint16_t, __int64_t, and __uint64_t.
-
-2002-02-12  Hans-Peter Nilsson  <hp@bitrange.com>
-
-        * libc/sys/mmixware/link.c: New.
-        * libc/sys/mmixware/sys/syscall.h (TRAP1i, I3f): Make asm
-        volatile.
-        * libc/sys/mmixware/times.c (_times): Renamed from times.
-        * libc/sys/mmixware/open.c (_open): Attempt to handle O_APPEND
-        properly by reading previous contents, not through BinaryReadWrite.
-        * libc/sys/mmixware/Makefile.am (lib_a_SOURCES): Add link.c
-        * libc/sys/mmixware/Makefile.in: Regenerate.
-
-2002-02-10  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/grp.h: Don't declare group functions when compiling
-	Cygwin.
-
-2002-02-09  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/grp.h: Include Cygwin specific header.
-	* libc/include/sys/stat.h: Ditto.  Don't define `struct stat'
-	when compiling for Cygwin.
-	* libc/include/sys/types.h: Don't define off_t, uid_t
-	and gid_t when compiling for Cygwin.
-
-2002-02-08  matthew green  <mrg@redhat.com>
-
-	* libc/include/sys/reent.h (_REENT_CHECK_EMERGENCY): Allocate
-	_REENT_EMERGENCY_SIZE, not sizeof(char *).
-
-2002-02-08  Alexandre Oliva  <aoliva@redhat.com>
-
-	Contribute sh64-elf.
-	2001-03-13  Alexandre Oliva  <aoliva@redhat.com>
-	* configure.host (newlib_cflags) [sh*-*-*]: Enable long long
-	support in printf.
-	2001-01-29  Alexandre Oliva  <aoliva@redhat.com>
-	* libc/machine/sh/setjmp.S [SH5]: Switch to SHmedia mode before
-	any labels.
-	2001-01-24  Alexandre Oliva  <aoliva@redhat.com>
-	* libc/sys/sh/trap.S (___trap34) [SH5]: Don't trash r2.
-	2000-12-16  Alexandre Oliva  <aoliva@redhat.com>
-	* libc/machine/sh/configure.in: Rework conditionals.
-	* libc/machine/sh/Makefile.am: Likewise.
-	* libc/machine/sh/configure, libc/machine/sh/Makefile.in: Rebuilt.
-	2000-12-01  Alexandre Oliva  <aoliva@redhat.com>
-	* configure.host: Match `sh*'.
-	* libc/include/machine/setjmp.h: Define for SH5.
-	* libc/machine/sh/configure.in: Detect SH5.
-	* libc/machine/sh/configure: Rebuilt.
-	* libc/machine/sh/Makefile.am: Use only setjmp.S for SH5.
-	* libc/machine/sh/Makefile.in: Rebuilt.
-	* libc/machine/sh/asm.h: Adjust for SH5.
-	* libc/machine/sh/setjmp.S: Implement in SHmedia.
-	* libc/sys/sh/crt0.S: Likewise.
-	* libc/sys/sh/trap.S: Likewise.
-
-2002-02-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/i386/Makefile.am: (mach_add_src): Remove.
-	(mach_add_obj): Conditionally set to setjmp.o or nothing.
-	(LIB_SOURCES): Remove $(mach_add_src).
-	(lib_a_LIBADD, lib_a_DEPENDENCIES): Add and set to $(mach_add_src).
-	(lib_la_LIBADD, lib_la_DEPENDENCIES): Ditto.
-	* libc/machine/i386/Makefile.in: Regenerate.
-
-2002-02-05  Manik Raina <manik@cisco.com>
-
-	* libc/misc/dprintf.c (parse_number): #if 0 unused function.
-	* libc/stdlib/ldtoa.c (_ldcheck): Remove unused local variables
-	s, p, k, and outstr.
-	* libc/stdlib/dtoa.c (_dtoa_r): Initialize mlo.
-
-2002-02-04  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h [(!_REENT_SMALL]: Add
-	_REENT_CHECK_EMERGENCY macro.
-
-2002-02-03  matthew green  <mrg@redhat.com>
-
-	* libc/reent/signgam.c (__signgam): Fix error in previous.
-
-2002-02-02  matthew green  <mrg@redhat.com>
-
-	* libc/include/sys/config.h (_REENT_SMALL): Define for Xstormy16.
-
-	* libc/reent/reent.c (_reclaim_reent): Clean for _REENT_SMALL case.
-	* libc/reent/reent.tex: Add blurb about _REENT_SMALL.
-	* libc/include/sys/reent.h (struct _reent): Completely new version
-	for _REENT_SMALL.
-	(_REENT_INIT): New defines, different defintion depending on _REENT_SMALL.
-	(_REENT_CHECK, _REENT_CHECK_TM): Likewise.
-	(_REENT_CHECK_ASCTIME_BUF, _REENT_INIT_RAND48): Likewise.
-	(_REENT_CHECK_RAND48, _REENT_INIT_MP, _REENT_CHECK_MP): Likewise.
-	(_REENT_CHECK_EMERGENCY, _REENT_SIGNGAM, _REENT_RAND_NEXT): Likewise.
-	(_REENT_RAND48_SEED, _REENT_RAND48_MULT, _REENT_RAND48_ADD): Likewise.
-	(_REENT_MP_RESULT, _REENT_MP_RESULT_K, _REENT_MP_P5S): Likewise.
-	(_REENT_MP_FREELIST, _REENT_ASCTIME_BUF, _REENT_TM): Likewise.
-	(_REENT_EMERGENCY): Likewise.
-
-	* libc/include/sys/reent.h (struct __sFILE_fake): New struct, same as
-	the start of the real __sFILE, used for stdin, stdout and stderr until
-	they are setup properly.
-	(struct __sFILE): Move location of _data in _REENT_SMALL case.
-	* libc/stdio/findfp.c (__sinit): Rearrange for _REENT_SMALL case by
-	allocated stdin, stdout and stderr.
-	* libc/stdio/getchar.c (_getchar_r): Call _REENT_SMALL_CHECK_INIT().
-	* libc/stdio/iprintf.c (iprintf, _iprintf_r): Likewise.
-	* libc/stdio/perror.c (_perror_r): Likewise.
-	* libc/stdio/printf.c (printf, _printf_r): Likewise.
-	* libc/stdio/putchar.c (_putchar_r): Likewise.
-	* libc/stdio/puts.c (_puts_r): Likewise.
-	* libc/stdio/scanf.c (scanf, _scanf_r): Likewise.
-	* libc/stdio/vprintf.c (vprintf): Likewise.
-	* libc/stdio/vscanf.c (vscanf, _vscanf_r): Likewise.
-
-	* libc/stdio/tmpnam.c (_tmpnam_r): Use _REENT_EMERGENCY().
-
-	* libc/reent/reent.c (_wrapup_reent): Adjust for _REENT_SMALL atexit.
-	* libc/include/sys/reent.h (_atexit): Limit atexit() entries to 32
-	for _REENT_SMALL.
-	* libc/stdlib/atexit.c (atexit): Rearrange for _REENT_SMALL case.
-	* libc/stdlib/exit.c (exit): Rearrange for _REENT_SMALL case.
-
-	* libc/include/sys/reent.h (struct _rand48): Keep _rand_next if
-	_REENT_SMALL.
-	* libc/stdlib/drand48.c (_drand48_r): Call _REENT_CHECK_RAND48().
-	* libc/stdlib/lcong48.c (_lcong48_r): Likewise.
-	* libc/stdlib/lrand48.c (_lrand48_r): Likewise.
-	* libc/stdlib/mrand48.c (_mrand48_r): Likewise.
-	* libc/stdlib/rand48.c (__dorand48): Likewise.
-	* libc/stdlib/seed48.c (_seed48_r): Likewise.
-	* libc/stdlib/srand48.c (_srand48_r): Likewise.
-	* libc/stdlib/rand48.h (__rand48_seed, __rand48_mult, __rand48_add): Define
-	as _REENT_RAND48_SEED(), _REENT_RAND48_MULT() and _REENT_RAND48_ADD().
-	* libc/stdlib/dtoa.c (_dtoa_r): Call _REENT_CHECK_MP().  Use
-	_REENT_MP_RESULT() and _REENT_MP_RESULT_K().
-	* libc/stdlib/ldtoa.c (_ldtoa_r): Likewise.
-	* libc/stdlib/rand.c (srand): Use _REENT_RAND_NEXT().
-	* libc/stdlib/rand.c (rand): Likewise.
-
-	* libc/stdlib/mallocr.c (malloc_stats): Call _REENT_SMALL_CHECK_INIT().
-	* libc/stdlib/mstats.c (_mstats_r): Call _REENT_SMALL_CHECK_INIT().
-
-	* libc/stdlib/mprec.c (Balloc): Call _REENT_CHECK_MP.  Use
-	_REENT_MP_FREELIST() and _REENT_MP_P5S.
-	* libc/include/sys/reent.h (struct _mprec): New structure.
-
-	* libc/include/sys/reent.h (struct _reent): Rename _strtok_last to
-	_unused_strtok_last.
-	* libc/string/strtok.c (strtok): Use a local static variable.
-
-	* libc/include/sys/reent.h (_REENT_ASCTIME_SIZE): New define.
-	(_REENT_EMERGENCY_SIZE): Likewise.
-	* libc/time/asctime.c (asctime): Call _REENT_CHECK_ASCTIME_BUF().  Use
-	_REENT_ASCTIME_BUF().
-	* libc/time/lcltime.c (localtime): Call _REENT_CHECK_TM().  Use
-	_REENT_TM().
-
-	* libc/include/math.h (__singam_r): Use _REENT_SIGNGAM().
-	* libc/reent/signgam.c (__signgam): Use _REENT_SIGNGAM().
-	* libm/math/w_gamma.c (gamma): Use _REENT_SIGNGAM().
-	* libm/math/w_lgamma.c (lgamma): Use _REENT_SIGNGAM().
-	* libm/math/wf_gamma.c (gammaf): Use _REENT_SIGNGAM().
-	* libm/math/wf_lgamma.c (lgammaf): Use _REENT_SIGNGAM().
-
-2002-02-01  Geoffrey Keating  <geoffk@redhat.com>
-
-	* configure.host (xstormy16): Don't use the generic malloc.
-	* libc/machine/xstormy16/Makefile.am: Build tiny-malloc.
-	* libc/machine/xstormy16/Makefile.in: Regenerate.
-	* libc/machine/xstormy16/mallocr.c: New file.
-	* libc/machine/xstormy16/tiny-malloc.c: New file.
-
-2002-01-28  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/sys/signal.h [__CYGWIN__]: Issue error message
-	when _CYGWIN_TYPES_H is not defined.
-
-2002-01-24  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/sys/signal.h: Revert 2002-01-23 change.
-
-2002-01-23  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/include/sys/signal.h: Remove pthread_kill declaration
-	when __CYGWIN__ is defined.
-
-2002-01-18  Mark Bradshaw  <bradshaw@staff.crosswalk.com>
-
-	* libc/include/time.h: Add prototype for strptime for Cygwin.
-
-2002-01-17  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/machine/xscale/memset.c (memset): Fix bug when len == 1 and
-	dst was not word aligned.
-
-	* libc/sys/arm/syscalls.c (_sbrk): Return -1 rather than aborting
-	if too much memory is requested.
-
-2002-01-11 Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfscanf.c (__svfscanf_r): Change loop that
-	reads blanks from the input file to break if EOF reached
-	rather than end processing.
-
-2002-01-07 Jeff Johnston  <jjohnstn@redhat.com>
-
-	* MAINTAINERS: Change e-mail addresses to refer to redhat domain.
-
-2002-01-07 Alan Matsuoka <alanm@redhat.com>
-
-        * libc/include/machine/ieeefp.h: Configure d10v doubles to
-        be 32 bits if __DOUBLE__ == 32  otherwise doubles are 64 bits.
-        libc/include/sys/config.h: Ditto.
-
-2001-12-28  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/sys/utmp.h: Add definition of UTMP_FILE.
-
-2001-12-22  Geoffrey Keating  <geoffk@redhat.com>
-	    Catherine Moore  <clm@redhat.com>
-	    Richard Henderson  <rth@redhat.com>
-	    Corinna Vinschen  <vinschen@redhat.com>
-
-	* configure.host: Add support for xstormy16.
-	* libc/include/machine/ieeefp.h: Add support for xstormy16.
-	* libc/include/machine/setjmp.h: Add support for xstormy16.
-	* libc/include/sys/config.h: Add support for xstormy16.
-	* libc/machine/xstormy16/Makefile.am: New file.
-	* libc/machine/xstormy16/Makefile.in: New file.
-	* libc/machine/xstormy16/aclocal.m4: New file.
-	* libc/machine/xstormy16/configure: New file.
-	* libc/machine/xstormy16/configure.in: New file.
-	* libc/machine/xstormy16/setjmp.S: New file.
-
-2001-12-19  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libm/machine/configure.in (HAVE_LIBM_MACHINE_DIR): New conditional.
-	* libm/machine/Makefile.am [HAVE_LIBM_MACHINE_DIR] (LIBM_MACHLIB): New variable.
-
-2001-12-19  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libm/machine/Makefile.am: Change rules to create correct lib.a.
-	* libm/machine/Makefile.in: Regenerated through automake.
-
-2001-12-18  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* Makefile.am (DOCDIR): Force to empty string when doc
-	directory is not present.
-
-2001-12-18  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/machine/i386/f_*: Move to libm/machine/i386.
-
-2001-12-18      Joel Sherrill <joel@OARcorp.com>
-
-	* libm/machine/Makefile.am: Add dummy doc stub so
-	"make info" works.
-
-2001-12-17	Joel Sherrill <joel@OARcorp.com>
-
-	* libc/include/sys/types.h (ino_t): RTEMS uses long also.
-
-2001-12-17  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/stdlib/Makefile.am (LIB_COMPILE): Change to equal
-	$(COMPILE) rather than $(CC).
-	* libc/stdio/Makefile.am (LIB_COMPILE): Likewise.
-	(vfprintf.$(oext)): Remove $(INCLUDES), made redundant by
-	$(LIB_COMPILE) change.
-	(vfiprintf.$(oext)): Likewise.
-
-2001-12-17  Corinna Vinschen  <vinschen@redhat.de>
-
-	* libc/sys/cygwin/include/unistd.h: Add __UNISTD_GETOPT_ to allow
-	conditionalized including of getopt stuff.
-
-2001-12-14  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* libc/stdio/Makefile.am (vfprintf.$(oext)): Add $(INCLUDES) to
-	compile line.
-	(vfiprintf.$(oext)): Likewise.
-
-2001-12-13  Thomas Fitzsimmons  <fitzsim@redhat.com>
-
-	* Makefile.shared: New file.
-	* libc/sys/linux/shared.ld: New file.
-	* libm/machine/*: New files.
-	* libm/machine/i386/*: New files.
-	* Makefile.am: Add libtool support.  Change math and mathfp
-	references to variables.
-	* configure.host: Add variables for libtool support.  Add
-	libm_machine_dir variable.
-	* configure.in: Add objectlist variables, for libtool
-	support.  Add CC_FOR_BUILD tests.
-	* libc/Makefile.am: Add libtool support.  Change crt0.o
-	reference to be a variable reference.
-	* libc/configure.in: Add libtool support.  Change sublib
-	names to be lib${subdir}.la when using libtool.
-	* libc/ctype/Makefile.am: Add libtool support.
-	* libc/errno/Makefile.am: Likewise.
-	* libc/locale/Makefile.am: Likewise.
-	* libc/machine/Makefile.am: Likewise.
-	* libc/machine/configure.in: Likewise.
-	* libc/machine/i386/Makefile.am: Likewise.
-	* libc/machine/i386/configure.in: Likewise.
-	* libc/misc/Makefile.am: Likewise.
-	* libc/posix/Makefile.am: Likewise.
-	* libc/reent/Makefile.am: Likewise.
-	* libc/signal/Makefile.am: Likewise.
-	* libc/stdio/Makefile.am: Likewise.
-	* libc/stdlib/Makefile.am: Likewise.
-	* libc/string/Makefile.am: Likewise.
-	* libc/sys/Makefile.am: Likewise.
-	* libc/sys/configure.in: Likewise.
-	* libc/sys/linux/Makefile.am: Add libtool support.  Change
-	awk reference to a variable reference.  Change signal.h
-	reference to a variable reference.
-	* libc/sys/linux/configure.in: Add libtool support.
-	* libc/syscalls/Makefile.am: Likewise.
-	* libc/time/Makefile.am: Likewise.
-	* libc/unix/Makefile.am: Likewise.
-	* libm/Makefile.am: Add libtool support.  Change math and
-	mathfp references to variables.
-	* libm/configure.in: Add libtool support.  Add
-	LIBM_MACHINE_LIB variable.
-	* libm/common/Makefile.am: Add libtool support.
-	* libm/math/Makefile.am: Likewise.
-	* libm/mathfp/Makefile.am: Likewise.
-	Regenerate all Makefile.in, aclocal.m4, and configure.
-
-2001-12-13 Anita Kulkarni <anitak@kpit.com>
-
-        * libc/sys/sh/crt0.S: Remove stack symbol definition 0xdeaddead.
-
-2001-12-06  John Peacock <jpeacock@rowman.com>
-
-	* libc/include/sys/unistd.h: Correct ualarm declaration.
-
-2001-12-05  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/sys/arm/crt0.S: For __USES_INITFINI__ preserve the argument
-	vector before calling the initialisation functions.
-
-2001-11-29  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/dirent.h: Protect against multiple inclusion.
-
-2001-11-27  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/include/sys/types.h: Define useconds_t.
-	* libc/include/sys/ulimit.h: Declare ualarm.
-
-2001-11-21  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/sys/cygwin/sys/dirent.h (DIR): Add another internal element.
-
-2001-11-19  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* libc/sys/mmixware/*: Tweak license header in all source files.
-
-2001-11-12  Corinna Vinschen  <vinschen@redhat.com>
-
-	* libc/include/alloca.h: Move libc/sys/linux/include/alloca.h
-	to here.  Rearrange for general inclusion by stdlib.h.
-	* libc/include/stdlib.h: Include <alloca.h> if __STRICT_ANSI__
-	isn't defined.
-	* libc/sys/linux/include/alloca.h: Move to libc/include.
-
-2001-11-12  Anthony Green  <green@redhat.com>
-
-	* libc/sys/arm/crt0.S (__stack_base__): New symbol.
-
-2001-11-13  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* libc/sys/mmixware/*: Correct spacing in all source files.
-	* libc/sys/mmixware/syscall.h: Move misplaced file...
-	* libc/sys/mmixware/sys/syscall.h: ...here.
-
-2001-11-12  Hans-Peter Nilsson  <hp@bitrange.com>
-
-        * libc/include/machine/ieeefp.h: Add support for mmix target.
-        * libc/include/machine/setjmp.h: Ditto.
-        * configure.host: Ditto.
-        * libc/sys/mmixware/Makefile.am, libc/sys/mmixware/_exit.c,
-        libc/sys/mmixware/access.c, libc/sys/mmixware/aclocal.m4,
-        libc/sys/mmixware/chmod.c, libc/sys/mmixware/chown.c,
-        libc/sys/mmixware/close.c, libc/sys/mmixware/configure.in,
-        libc/sys/mmixware/creat.c, libc/sys/mmixware/crt0.c,
-        libc/sys/mmixware/execv.c, libc/sys/mmixware/execve.c,
-        libc/sys/mmixware/fork.c, libc/sys/mmixware/fstat.c,
-        libc/sys/mmixware/getpid.c, libc/sys/mmixware/gettime.c,
-        libc/sys/mmixware/isatty.c, libc/sys/mmixware/kill.c,
-        libc/sys/mmixware/lseek.c, libc/sys/mmixware/open.c,
-        libc/sys/mmixware/pipe.c, libc/sys/mmixware/read.c,
-        libc/sys/mmixware/sbrk.c, libc/sys/mmixware/setjmp.S,
-        libc/sys/mmixware/stat.c, libc/sys/mmixware/sys/syscall.h,
-        libc/sys/mmixware/time.c, libc/sys/mmixware/times.c,
-        libc/sys/mmixware/unlink.c, libc/sys/mmixware/utime.c,
-        libc/sys/mmixware/wait.c, libc/sys/mmixware/write.c: New files.
-        * libc/sys/mmixware/configure, libc/sys/mmixware/Makefile.in,
-        libc/sys/mmixware/aclocal.m4: Generate.
-
-2001-11-05  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/unistd.h: Add prototypes for endusershell(),
-	getusershell(), iruserok(), revoke(), ruserok() and setusershell()
-	when __CYGWIN__ is defined.
-	* libc/sys/cygwin/sys/utmp.h: Add prototypes for login_tty() and
-	logwtmp().
-
-2001-11-01  Arati Dikey  <aratidikey@hotmail.com>
-
-	* libm/mathfp/sf_isinf.c (isinff): Change to use _DEFUN macro.
-	[_DOUBLE_IS_32BITS](isinf): New function that calls isinff.
-	* libm/mathfp/sf_isnan.c (isnanf): Change to use _DEFUN macro.
-	[_DOUBLE_IS_32BITS](isnan): New function that calls isnanf.
-
-2001-10-24  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/stdio/fseek.c: Reset pointer to buffer base
-	when forced to seek outside of current buffer contents.
-	This prevents the code from erroneously thinking there is
-	anything in the current buffer.
-
-2001-10-22  Geoffrey Keating  <geoffk@redhat.com>
-
-	* libc/include/math.h: The C++ standard adds the single-precision
-	versions of the elementary functions.
-
-2001-10-22  Christopher Faylor  <cgf@redhat.com>
-
-	* libc/posix/execvp.c: Remove obsolete CYGWIN32 considerations
-	throughout.
-	* signal.h: Change comment to reflect __CYGWIN__ rather than __CYGWIN32__.
-	* popen.c (popen): Use __CYGWIN_ rather than __CYGWIN32__.
-	* system.c (_system_r): Ditto.
-
-2001-10-17  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/include/sys/unistd.h: Add prototype for fchdir() when
-	__CYGWIN__ or __rtems__ is defined.
-
-2001-10-01  Charles Wilson  <cwilson@ece.gatech.edu>
-
-        * libc/include/stdlib.h: add declarations for
-        _strtoull_r, _strtoll_r, strtoull, and strtoll.
-        * libc/stdio/local.h: remove declarations of
-        __strtoull_r and __strtoll_r.
-        * libc/stdio/vfscanf.c(__svfscanf_r): call
-        _strtoull_r instead of __strtoull_r. Ditto
-        _strtoll_r vs. __strtoll_r.
-        * libc/stdlib/Makefile.am: add new files to
-        .c list and .def list
-        * libc/stdlib/Makefile.in: regenerate
-        * libc/stdlib/strtoll_r.c: rename __strtoll_r
-        as _strtoll_r
-        * libc/stdlib/strtoull_r.c: rename __strtoull_r
-        as _strtoull_r
-        * libc/stdlib/strtoull.c: new file
-        * libc/stdlib/strtoll.c: new file
-
-Mon Sep 17 17:29:47 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/process.h: Add getpid() declaration.
-
-2001-09-14  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/sys/arm/crt0.S: Add calls to _init and _fini (via atexit)
-	for new style arm/elf ctor/dtor handling.
-	Minor formatting tidy up.
-
-2001-09-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/Makefile.am: Add support to build strtoll_r.c
-	and strtoull_r.c.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/stdlib/strtoll_r.c: New file.
-	* libc/stdlib/strtoull_r.c: New file.
-	* libc/stdio/local.h: Add prototypes for long long string
-	conversion routines.
-	* libc/stdio/vfscanf.c (__svfscanf_r): Add optional long long support
-	tied to %L integer conversion specifier.
-
-Thu Sep 13 08:49:49 2001  Jason Tishler <jason@tishler.net>
-
-        * strftime.c (strftime): Fix "%W" implementation to properly handle
-        Mondays too.
-
-2001-09-07  Jeff Law  <law@redhat.com>
-
-        * libc/sys/h8300hms/crt0.S: For H8/300H and H8/S, load address of
-        __fini with "mov.l" instead of "mov.w".
-
-2001-09-05  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/include/unistd.h: New file, wrapping sys/unistd.h
-	and getopt.h.
-
-2001-09-04  Jason Merrill  <jason_merrill@redhat.com>
-
-	* libc/sys/h8300hms/crt0.S: Support ELF initialization.
-
-2001-09-03  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/sys/dirent.h (struct dirent): Add version number
-	field.
-	(__DIRENT_VERSION): New define.
-
-2001-09-03  Corinna Vinschen  <corinna@vinschen.de>
-
-	* libc/sys/cygwin/sys/dirent.h (struct dirent): Add `d_fd' member.
-	Shrink __d_reserved accordingly to keep structure size.
-	(dirfd): Declare external.
-
-2001-08-29  Joel Sherrill <joel@OARcorp.com>
-
-	* libc/include/sys/unistd.h: Prototype chroot() for RTEMS.
-
-2001-08-29  Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* libc/machine/i386/f_atan2.S, libc/machine/i386/f_atan2f.S,
-	  libc/machine/i386/f_exp.c, libc/machine/i386/f_expf.c,
-	  libc/machine/i386/f_frexp.S, libc/machine/i386/f_frexpf.S,
-	  libc/machine/i386/f_ldexp.S, libc/machine/i386/f_ldexpf.S,
-	  libc/machine/i386/f_log.S, libc/machine/i386/f_log10.S,
-	  libc/machine/i386/f_log10f.S, libc/machine/i386/f_logf.S,
-	  libc/machine/i386/f_pow.c, libc/machine/i386/f_powf.c,
-	  libc/machine/i386/f_tan.S, libc/machine/i386/f_tanf.S:
-	Add conditional compilation to avoid HW FPU instructions
-	when compiled for soft-float.
-
-2001-08-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Add check for ln failing when creating libg.a
-	so that cp gets used as a backup.
-	* Makefile.in: Regenerated.
-
-2001-08-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/reent.h: Add include of <sys/_types.h>.
-	No longer include time.h.  Add struct __tm to use for
-	_localtime_buf in the reentrant structure.  Add a
-	_NULL definition to use in initializing the reentrant struct.
-	* libc/include/sys/config.h: For CYGWIN32 and RTEMS, change
-	the _READ_WRITE_RETURN_TYPE to _ssize_t which is found in
-	<sys/_types.h>.
-	* libc/include/sys/unistd.h: Include <sys/_types.h>.
-	* libc/time/lcltime.c (localtime): Cast the reentrant struct
-	_localtime_buf to be struct tm *.
-
-Wed Aug 29 14:17:38 2001  J"orn Rennecke <amylaar@redhat.com>
-
-	* configure.host (h8300-*-elf*, h8500-*-elf*): New cases.
-	* libc/sys/h8300hms/crt1.c (__main): Don't reference __ctors /
-	__ctors_end.
-	* libc/sys/h8300hms/syscalls.c: Include errno.h.
-	(_unlink): New stub function.
-
-Sat Aug 25 22:22:25 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/errno.h: Add a cautionary comment.
-
-2001-08-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/mallocr.c [!defined(MALLOC_ALIGNMENT)]: Add conditional
-	for SIZE_SZ so that alignment ends up a minimum of 8.
-
-Mon Aug 13 22:26:01 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Protect sigsetjmp/siglongjmp macro
-	arguments.
-
-	* libc/include/sys/errno.h: Declare sys_errlist and sys_nerr, under
-	Cygwin.
-
-2001-08-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/malloc.h (M_MXFAST, M_NLBLKS, M_GRAIN, M_KEEP): New
-	macro constants for mallopt options.
-	(M_TRIM_THRESHOLD, M_TOP_PAD, M_MMAP_THRESHOLD, M_MMAP_MAX): Ditto.
-
-2001-08-02  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h (BUFSIZ): Define to __BUFSIZ__ if provided,
-	otherwise default.
-
-2001-07-12  Aldy Hernandez  <aldyh@redhat.com>
-
-        * libc/machine/mips/setjmp.S: Allow mips16 and mips64 to coexist.
-
-2001-06-27  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/include/machine/ieeefp.h (__IEEE_BYTES_LITTLE_ENDIAN):
-	Define for little endian ARMs.
-
-	* libc/stdlib/mprec.h (Storeinc): Use little endian version if
-	__IEEE_BYTES_LITTLE_ENDIAN is defined.
-
-2001-06-11  Danny Smith  <dannysmith@users.sourceforge.net>
-
-        * /libc/include/ctype.h (is* and to* macros): Do not define if C++.
-
-2001-06-11  Egor Duda  <deo@logos-m.ru>
-
-        * libc/ctype/ctype_.c: When compiled with gcc on platforms
-        with signed char, make _ctype_[-128] ... _ctype[-1] refer to
-        initialized memory region. Platform can define COMPACT_CTYPE
-        to avoid allocation of the additional 128 bytes of data.
-        Add pointer to _ctype_ array. Always initialize all _ctype_
-        array elements.
-
-2001-06-08  Jonathan Larmour  <jlarmour@redhat.com>
-
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): Avoid dereferencing
-	NULL pointer.
-
-2001-05-28  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Handle printf ("%#.0o",0)
-
-2001-05-25  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* libc/machine/xscale/memcmp.c: Fix bug when both pointers have
-	matching, non-word alignment, and the length is <= 4 but more than
-	enough to move them over a word boundary.
-	Add comments explaining what each instruction does.
-
-Mon May  7 20:39:25 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/stat.h: Revert March 3, Cygwin change.
-	* libc/include/sys/unistd.h: Ditto.
-
-2001-05-04  Earnie Boyd  <earnie@users.sourceforge.net>
-
-        * libc/string/strrchr.c: Use strchr for the speed improvements.
-
-2001-05-01  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/findfp (__sinit)[HAVE_FCNTL]: For platforms that have
-	real file systems, let __smakebuf() determine if line buffering
-	should be used for stdout.
-
-2001-04-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfscanf.c (__svfscanf_r): Initialize new_exp local var.
-
-2001-04-27  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdlib.h: Add prototype for _strtod_r.
-
-2001-04-24  Charles Wilson  <cwilson@ece.gatech.edu
-
-        * libc/stdio/vprintf.c (vprintf): fix signature to use _DEFUN
-        * libc/stdio/vprintf.c (_vprintf_r): new function
-        * libc/stdio/vsnprintf.c (vsnprintf): fix signature to use _DEFUN
-        * libc/stdio/vsnprintf.c (_vsnprintf_r): fix signature to use
-        _DEFUN, and call _vfprintf_r, not vfprintf.
-        * libc/stdio/vsprintf.c (vsprintf.c): fix signature to use _DEFUN
-        * libc/stdio/vsprintf.c (_vsprintf_r): fix signature to use
-        _DEFUN, and call _vfprintf_r, not vfprintf.
-
-2001-04-22  Earnie Boyd  <earnie@users.sourceforge.net>
-  
-	* libc/include/sys/unistd.h [X_OK]: Use better protection against
-	Cygwin X_OK definitions in sys/file.h.
-
-Fri Apr 20 23:17:51 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/time.h: Define timercmp and other macros for
-	__CYGWIN__, too.
-
-2001-04-20  Jeff Johnston  <jjohnstn@redhat.com>
-	
-	* acinclude.m4: Added --enable-malloc-debugging configure flag.
-	* configure.host: For Cygwin specify -DMALLOC_PROVIDED if
-	--enable-malloc-debugging selected.
-	* aclocal.m4 configure: Regenerated.
-	  libm/aclocal.m4 libm/configure: Ditto.
-	* libc/aclocal.m4 libc/configure: Ditto.
-	* libc/machine/aclocal.m4 libc/machine/configure: Ditto.
-	* libc/machine/*/aclocal.m4 libc/machine/*/configure: Ditto.
-	* libc/sys/aclocal.m4 libc/sys/configure: Ditto.
-	* libc/sys/*/aclocal.m4 libc/sys/*/configure: Ditto.
-	* doc/aclocal.m4 doc/configure: Ditto.
-
-2001-04-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h[!_REENT_ONLY]: Moved various functions together
-	into one list.
-	[!__STRICT_ANSI__]: Moved non-ANSI I/O functions in this list.
-	(vfscanf, vscanf, vsscanf, _vfscanf_r, _vscanf_r, _vsscanf_r): New
-	function prototypes.
-	(_fscanf_r, _sscanf_r): Ditto.
-	* libc/include/stdlib.h: Added _strtod_r prototype.
-	* libc/stdio/Makefile.am: Add new v*scanf functions.
-	* libc/stdio/Makefile.in: Regenerate.
-	* libc/stdio/fscanf.c: Reorganized so HAVE_STDC only affects prototype
-	and code is shared.  Added reentrant _fscanf_r which calls __svfscanf_r.
-	* libc/stdio/scanf.c: Changed to call __svfscanf_r.
-	* libc/stdio/sscanf.c: Changed documentation to add reentrant routines.
-	(sscanf): Changed to call __svfscanf_r with _REENT argument.
-	(_sscanf_r): New routine.
-	* libc/stdio/local.h: Removed __svfscanf prototype and replaced it
-	with __svfscanf_r prototype.
-	* libc/stdio/vfscanf.c (vfscanf, _vfscanf_r: New
-	routines.
-	(__svfscanf_r): Reentrant version of __svfscanf which takes reetrancy
-	structure as argument as calls reentrant versions of helper functions
-	(e.g. _strtol_r, _strtoul_r). Also replaced calls to atol and atof
-	to _strtol_r and _strtod_r respectively.
-	* libc/stdio/vfscanf.c: Also changed __svfscanf to call __svfscanf_r.
-	* libc/stdlib/strtod.c (strtod): Changed to call _strtod_r with
-	_REENT argument.
-	* libc/stdio/vscanf.c: New file.
-	* libc/stdio/vsscanf.c: Ditto.
-
-2001-04-19  Robert Collins  <rbtcollins@hotmail.com>
-
-	* include/time.h[__CYGWIN__]:  Define tzname to _tzname if not defined.
-	Define daylight to _daylight if it is not defined
-	Prepare a variable export of timezone based on timezonevariable. 
-	(Cannot be used with the timezone() function.)
-
-2001-04-17  Stephen L. Moshier  <moshier@moshier.ne.mediaone.net>
-
-        * newlib/libm/math/ef_asin.c (pio2_hi, pio2_lo, pio4_hi):
-         Correct the numerical values.
-
-2001-04-13  Robert Collins <rbtcollins@hotmail.com>
-
-	* libc/include/sys/unistd.h: Add pthread_atfork (Cygwin only).
-
-Thu Apr 12 23:11:00 2001  Corinna Vinschen <corinna@vinschen.de>
-
-	* libc/include/sys/errno.h: Add ECASECLASH to indicate case clash
-	on case insensitve file systems.
-
-2001-04-12  Robert Collins <rbtcollins@hotmail.com>
-
-	* libc/include/sys/features.h: Add appropriate defines for Cygwin
-	pthread support.
-	* libc/include/sys/signal.h: Remove unneeded __CYGWIN__ protection.
-	* libc/include/sys/types.h: Protect __CYGWIN__ from the rtems pthreads
-	types.  Include <cygwin/types.h> for the cygwin specific typedefs.
-
-2001-04-04  Richard Sandiford  <rsandifo@redhat.com>
-
-	* libc/include/machine/ieeefp.h: Comment about new configuration
-	macros _FLT_LARGEST_EXPONENT_IS_NORMAL and _FLT_NO_DENORMALS.
-	* libm/common/fdlib.h: Define new macros for testing floats.
-	* libm/common/sf_*: Use them.
-	* libm/math/ef_*: Likewise.
-	* libm/math/sf_*: Likewise.
-
-2001-03-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/arm/setjmp.S: Added .code 16 specifier for thumb-mode
-	prolog to by-pass possible assembler error.
-
-2001-03-21  Egor Duda  <deo@logos-m.ru>
-
-        Allow building internal stubs for non-reentrant syscalls
-        if target provides its own malloc
-        * libc/reent/reent.c (errno): Move definition here.
-        * libc/reent/sbrkr.c: From here.
-
-2001-03-20  Danny Smith <dannysmith@users.sourceforge.net>
-
-	* libc/include/sys/types.h (BSD int typedefs): Guard with
-	_BSDTYPES_DEFINED rather than _WINSOCK_H.
-	(fd_set): Add !defined __USE_W32_SOCKETS to guard; define
-	_SYS_TYPES_FD_SET.
-	* libc/include/sys/unistd.h (gethostname): Don't declare if defined
-	(_WINSOCK_H) || defined (__USE_W32_SOCKETS).
-
-Sat Mar 17 18:30:00 2001  Corinna Vinschen <corinna@vinschen.de>
-
-	* libc/include/sys/unistd.h: Add _PC_POSIX_PERMISSONS and
-	_PC_POSIX_SECURITY constants for Cygwin.
-
-Wed Mar 14  9:34:00 2001  Corinna Vinschen <corinna@vinschen.de>
-
-	* libc/sys/cygwin/crt0.c: Add copyright hint.
-	* libc/sys/cygwin/sys/dirent.h: Ditto.
-	* libc/sys/cygwin/sys/param.h: Ditto.
-	* libc/sys/cygwin/sys/utime.h: Ditto.
-	* libc/sys/cygwin/sys/utmp.h: Ditto.
-
-2001-03-13  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/stdio/vfprintf.c (QUADINT) [_NO_LONGLONG]: Make it
-	equivalent to LONGINT.
-
-2001-03-08  Richard Sandiford  <rsandifo@redhat.com>
-
-        * (libc/include/machine/setjmp.h): Use 23 long long ints for a
-        jmpbuf on MIPS64 targets.
-        * (libc/machine/mips/setjmp.S): Add MIPS64 version.
-
-Wed Mar  7 16:02:07 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/config.h: Use ssize_t for Cygwin read/write 
-          declarations.
-
-Mon Mar  5 21:48:54 2001  J"orn Rennecke <amylaar@redhat.com>
-
-        * libc/include/sys/config.h (_READ_WRITE_RETURN_TYPE): Define.
-        For RTEMS, define to be ssize_t.  Default to int if not defined.
-        * libc/stdio/sscanf.c (eofread): Return _READ_WRITE_RETURN_TYPE.
-        * libc/stdio/stdio.c (__sread, __swrite): Likewise.
-        * libc/stdio/local.h (__sread, __swrite): Likewise.
-        * libc/include/sys/reent.h (_read, _write): Likewise.
-        * libc/include/sys/unistd.h (read, write, _read, _write): Likewise.
-        * libc/syscalls/sysread.c (read): Likewise.
-        * libc/syscalls/syswrite.c (write): Likewise.
-
-2001-03-05  Jeff Johnston  <jjohnstn@redhat.com>
-
-        * libc/time/mktime.c: Add L suffix to _SEC_IN_xxxx constants.
-
-Sat Mar  3 00:34:14 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/stat.h: Use special defines for executable stat bits
-	when compiling for Cygwin.
-	* libc/include/sys/unistd.h: Use special define for X_OK when compiling
-	for Cygwin.
-
-2001-03-02  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/string/strtok.c: Add #undef of __STRICT_ANSI__ so prototype
-	of strtok_r is always defined.
-
-2001-03-02  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/machine/ansi.h: New dummy header file.
-
-2001-02-22  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/machine/setjmp-dj.h: With DJ Delorie's permission,
-	changed the copyright information to allow free modification of the
-	file with no reference to "copying.dj".
-	* libc/include/sys/stat-dj.h: Ditto.
-	* libc/machine/i386/setjmp.S: Ditto.
-	* libc/sys/h8300hms/sys/file.h: Ditto.
-	* libc/sys/sysmec/access.c: Ditto.
-	* libc/sys/sysnecv850/access.c: Ditto.
-	* libc/stdio/mktemp.c: Fixed typo for the word copyright.
-	* libc/stdlib/getenv_r.c: Ditto.
-	* libc/stdlib/putenv_r.c: Ditto.
-	* libc/stdlib/setenv_r.c: Ditto.
-	* libc/stdlib/getenv.c: Removed DJ reference since any possible
-	modifications will now be in the _r version of this file.
-	* libc/stdlib/putenv.c: Ditto.
-	* libc/stdlib/setenv.c: Ditto.
-	* libc/sys/go32/copying.dj: Removed DJ's address which is no longer
-	valid.  Added a reference to DJ's web page that contains his address.
-	* libc/sys/go32/*.s: Removed references to DJ's old address.
-	* libc/sys/go32/*.c: Ditto.
-	* libc/sys/go32/*.h: Ditto.
-	* libc/sys/go32/*.S: Ditto.
-	* libc/sys/go32/sys/*.h: Ditto.
-
-2001-02-21  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/fdopen.c (fdopen): Protect calls to _fcntl() with
-	HAVE_FCNTL flag check.
-	* configure.host: Define HAVE_FCNTL for Cygwin, go32, RTEMS, sparc64,
-	powerpcle, x86 netware, x86 sco, x86 Linux and Vxworks.
-
-Thu Feb 15 01:39:51 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/signal.h: Always include sys/types.h under Cygwin.
-
-2001-02-14  Kazuhiro Fujieda  <fujieda@jaist.ac.jp>
-
-        * libc/include/stdlib.h: Add declarations of rand48 functions and
-        their reentrant versions.
-        * libc/include/sys/reent.h: Move macros from rand48.h. Add
-        struct _rand48 for shared parameters of rand48 functions.
-        (struct _reent): Add a variable _r48 of struct _rand48.
-        (_REENT_INIT): Add _r48 initialization.
-        * libc/stdlib/Makefile.am (lib_a_SOURCES): Add rand48 functions.
-        (CHEWOUT_FILES): Add rand48.def.
-        * libc/stdlib/Makefile.am: Add dependencies for rand48 functions.
-        * libc/stdlib/Makefile.in: Regenerated.
-        * libc/stdlib/drand48.c (drand48, _drand48_r): Derived from the
-        NetBSD C library.
-        * libc/stdlib/erand48.c (erand48, _erand48_r): Ditto.
-        * libc/stdlib/jrand48.c (jrand48, _jrand48_r): Ditto.
-        * libc/stdlib/lcong48.c (lcong48, _lcong48_r): Ditto.
-        * libc/stdlib/lrand48.c (lrand48, _lrand48_r): Ditto.
-        * libc/stdlib/mrand48.c (mrand48, _mrand48_r): Ditto.
-        * libc/stdlib/nrand48.c (nrand48, _nrand48_r): Ditto.
-        * libc/stdlib/seed48.c (seed48, _seed48_r): Ditto.
-        * libc/stdlib/srand48.c (srand48, _srand48_r): Ditto.
-        * libc/stdlib/rand48.c (__dorand48): Ditto.
-        * libc/stdlib/rand48.h: Ditto, and modify declarations of global
-        parameters into macros referring them in the reentrant structure.
-
-2001-02-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/stat.h: Add mknod for Cygwin now that
-	Cygwin definition has correct prototype.
-
-2001-02-08  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/stat.h: Must revert change for mknod
-	for CYGWIN until winsup/cygwin/syscalls.cc changes mknod
-	prototype.
-
-2001-02-08  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h: Revert putw prototype.
-
-2001-02-08  Edward M. Lee  <tailbert@yahoo.com>
-
-        * libc/include/grp.h: add prototype for initgroups.
-        * libc/include/stdio.h: fix prototype for putw.
-        * libc/include/sys/signal.h: add prototype for killpg.
-        * libc/include/sys/stat.h: enable mknod/lstat for CYGWIN.
-        * libc/include/sys/unistd.h: add prototypes for getpgid, setpgrp,
-	vhangup and remove duplicate sysconf prototype.
-
-2001-02-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/rtems/sys/types.h: Removed.
-
-2001-02-05  Charles Wilson  <cwilson@ece.gatech.edu>
-
-        * libc/include/locale.h: add LC_MESSAGES definition
-
-2001-02-01  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/sys/sh/sys/syscall.h (SYS_get_argc, SYS_get_argN_len,
-	SYS_get_argN):
-	* libc/sys/sh/syscalls.c (__setup_argv_for_main,
-	__setup_argv_and_call_main): New.
-
-2001-01-31  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/stdio.h (FILENAME_MAX): Changed to use __FILENAME_MAX__
-	if defined.
-	(FOPEN_MAX): Changed to use __FOPEN_MAX__ if defined.
-	(L_tmpnam): Changed to use __L_tmpnam__ if defined.
-	* libc/include/sys/config.h: Changed to set __FILENAME_MAX__
-	appropriately for Cygwin and RTEMS so not to exceed PATH_MAX.
-
-Mon Jan 29 23:03:06 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/stdlib/mallocr.c: Undefine windows preprocessor variables when
-	compiling under Cygwin.
-
-2001-01-29  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h (signgam): Change to errno-like solution
-	using a function to return the address of the real signgam.
-	* libc/reent/signgam.c: New file containing __signgam().
-	* libc/reent/Makefile.am: Added signgam.c to list of files.
-	* libc/reent/Makefile.in: Regenerated.
-
-2001-01-25  Alexandre Oliva  <aoliva@redhat.com>
-
-	* libc/sys/sh/syscalls.c (_times): New.
-
-	* configure.host (sh*-*-*): Add -DHAVE_GETTIMEOFDAY to newlib_cflags.
-	* libc/sys/sh/syscalls.c (_gettimeofday): New.
-
-2001-01-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h (signgam): Regress previous fix as
-	it does not handle programs with extern int signgam in them.
-
-2001-01-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/math.h (signgam): Changed to a macro refering to
-	its location in the reentrant structure.
-
-2001-01-23  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Modification to fix
-	that suppressed . for %.0f, 0.1.  Check now looks if there
-	are padding zeroes (expt) in addition to any digits (ndig) to
-	print.
-
-2001-01-18  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/sys/arc/Makefile.am: New file.
-	* libc/sys/arc/Makefile.in: Ditto.
-	* libc/sys/arc/aclocal.m4: Ditto.
-	* libc/sys/arc/configure: Ditto.
-	* libc/sys/arc/configure.in: Ditto.
-	* libc/sys/arc/crt0.S: Ditto.
-	* libc/sys/arc/isatty.c: Ditto.
-	* libc/sys/arc/mem-layout.c: Ditto.
-	* libc/sys/arc/sbrk.c: Ditto.
-	* libc/sys/arc/syscalls.c: Ditto.
-	* libc/sys/arc/sys/syscall.h: Ditto.
-
-Wed Jan 17 23:20:56 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/unistd.h: Use correct declaration for setdtablesize.
-
-Fri Jan 12 00:34:31 2001  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/signal.h: Add some SA_* defines for Cygwin.
-
-Thu Jan 11 20:42:06  2001  Earnie Boyd  <earnie_boyd@yahoo.com>
-
-	* libc/include/sys/features.h: __CYGWIN__ preferred over __CYGWIN32__
-
-2001-01-09  Nick Clifton  <nickc@redhat.com>
-
-	* configure.host (v859): Remove unsupported compiler options.
-
-Fri Jan  5 19:57:00 EST 2001  Aaron J. Grier  <aaron@frye.com>
-
-	* src/newlib/configure.host (*-*-rtems*): add printf long long
-	support for RTEMS.
-
-2000-12-19  Graham Stott <grahams@redhat.com>
-
-        * libc/machine/xscale/memcmp.c (memcmp): Add clobber for "lr".
-
-Wed Dec 14  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* configure.host: Turn on long double I/O for Cygwin.
-
-Wed Dec 14  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* MAINTAINERS: Removed Ranjith.
-	* NEWS: Updated for 1.9.0.
-	* README: Updated.
-	* acinclude.m4: Updated to release 1.9.0.
-	* aclocal.m4 configure
-	  doc/aclocal.m4 doc/configure libc/aclocal.m4 libc/configure
-	  libc/machine/aclocal.m4 libc/machine/configure
-	  libc/machine/a29k/aclocal.m4 libc/machine/a29k/configure
-	  libc/machine/arm/aclocal.m4 libc/machine/arm/configure
-	  libc/machine/d10v/aclocal.m4 libc/machine/d10v/configure
-	  libc/machine/d30v/aclocal.m4 libc/machine/d30v/configure
-	  libc/machine/fr30/aclocal.m4 libc/machine/fr30/configure
-	  libc/machine/h8300/aclocal.m4 libc/machine/h8300/configure
-	  libc/machine/h8500/aclocal.m4 libc/machine/h8500/configure
-	  libc/machine/hppa/aclocal.m4 libc/machine/hppa/configure
-	  libc/machine/i386/aclocal.m4 libc/machine/i386/configure
-	  libc/machine/i960/aclocal.m4 libc/machine/i960/configure
-	  libc/machine/m32r/aclocal.m4 libc/machine/m32r/configure
-	  libc/machine/m68k/aclocal.m4 libc/machine/m68k/configure
-	  libc/machine/m88k/aclocal.m4 libc/machine/m88k/configure
-	  libc/machine/mips/aclocal.m4 libc/machine/mips/configure
-	  libc/machine/mn10200/aclocal.m4 libc/machine/mn10200/configure
-	  libc/machine/mn10300/aclocal.m4 libc/machine/mn10300/configure
-	  libc/machine/necv70/aclocal.m4 libc/machine/necv70/configure
-	  libc/machine/powerpc/aclocal.m4 libc/machine/powerpc/configure
-	  libc/machine/sh/aclocal.m4 libc/machine/sh/configure
-	  libc/machine/sparc/aclocal.m4 libc/machine/sparc/configure
-	  libc/machine/tic80/aclocal.m4 libc/machine/tic80/configure
-	  libc/machine/v850/aclocal.m4 libc/machine/v850/configure
-	  libc/machine/w65/aclocal.m4 libc/machine/w65/configure
-	  libc/machine/xscale/aclocal.m4 libc/machine/xscale/configure
-	  libc/machine/z8k/aclocal.m4 libc/machine/z8k/configure
-	  libc/sys/aclocal.m4 libc/sys/configure
-	  libc/sys/a29khif/aclocal.m4 libc/sys/a29khif/configure
-	  libc/sys/arm/aclocal.m4 libc/sys/arm/configure
-	  libc/sys/cygwin/aclocal.m4 libc/sys/cygwin/configure
-	  libc/sys/d10v/aclocal.m4 libc/sys/d10v/configure
-	  libc/sys/decstation/aclocal.m4 libc/sys/decstation/configure
-	  libc/sys/go32/aclocal.m4 libc/sys/go32/configure
-	  libc/sys/h8300hms/aclocal.m4 libc/sys/h8300hms/configure
-	  libc/sys/h8500hms/aclocal.m4 libc/sys/h8500hms/configure
-	  libc/sys/linux/aclocal.m4 libc/sys/linux/configure
-	  libc/sys/m88kbug/aclocal.m4 libc/sys/m88kbug/configure
-	  libc/sys/netware/aclocal.m4 libc/sys/netware/configure
-	  libc/sys/rtems/aclocal.m4 libc/sys/rtems/configure
-	  libc/sys/sh/aclocal.m4 libc/sys/sh/configure
-	  libc/sys/sparc64/aclocal.m4 libc/sys/sparc64/configure
-	  libc/sys/sun4/aclocal.m4 libc/sys/sun4/configure
-	  libc/sys/sysmec/aclocal.m4 libc/sys/sysmec/configure
-	  libc/sys/sysnec810/aclocal.m4 libc/sys/sysnec810/configure
-	  libc/sys/sysnecv850/aclocal.m4 libc/sys/sysnecv850/configure
-	  libc/sys/sysvi386/aclocal.m4 libc/sys/sysvi386/configure
-	  libc/sys/sysvnecv70/aclocal.m4 libc/sys/sysvnecv70/configure
-	  libc/sys/tic80/aclocal.m4 libc/sys/tic80/configure
-	  libc/sys/w65/aclocal.m4 libc/sys/w65/configure
-	  libc/sys/z8ksim/aclocal.m4 libc/sys/z8ksim/configure
-	  libm/aclocal.m4 libm/configure: Regenerated.
-
-Wed Dec 13 11:52:00 2000  Corinna Vinschen <vinschen@cygnus.com>
-
-	* libc/include/sys/unistd.h: Add declarations for `chroot' and `getwd'
-	when __CYGWIN__ is defined.
-
-2000-12-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/ldtoa.c (_ldcheck): New routine
-	that categorizes a long double as NaN, Infinity, or other.
-	* libc/stdio/vfprintf.c [WANT_IO_LONG_DBL](_VFPRINTF_R): Removed 
-	isinfl and isnanl static routines which were i386-specific.  Changed 
-	calls to the two removed routines to a single _ldcheck call.
-	* libc/stdio/vfieeefp.h (ldieee): Fixed missing semi-colons.
-
-2000-12-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* Makefile.am: Fixed install-data-local target to use
-	$(mkinstalldirs) for the installed header files to ensure
-	the directories exist before copying.
-	* Makefile.in: Regenerated.
-
-2000-12-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/unistd.h: Restored Cygwin _SC
-	constants and moved new constants appropriately
-	so Cygwin will build.
-
-2000-12-11  Joel Sherrill <joel@OARcorp.com>
-
-        * Merge RTEMS specific .h files into main libc/include.
-        * libc/sys/rtems/include/signal.h: Removed.
-        * libc/sys/rtems/include/time.h: Removed.
-        * libc/sys/rtems/sys/features.h: Removed.
-        * libc/sys/rtems/sys/sched.h: Removed.
-        * libc/sys/rtems/sys/siginfo.h: Removed.
-        * libc/sys/rtems/sys/signal.h: Removed.
-        * libc/sys/rtems/sys/time.h: Removed.
-        * libc/sys/rtems/sys/times.h: Removed.
-	definitions for time_t and clock_t since these are
-	no longer in time.h.
-        * libc/include/pthread.h: New file.
-        * libc/include/sys/sched.h: New file.
-        * libc/include/sys/features.h: New file.
-        * libc/include/time.h: Removed duplicate definition of clock_t
-        and time_t, get them from <sys/types.h> instead.  Add prototypes
-        for POSIX clock and timer functionality.
-	* libc/sys/linux/sys/types.h: Changed to include
-        * libc/include/machine/types.h: Add _CLOCKID_T_ and _TIMER_T_.
-        * libc/include/sys/signal.h: Add more complete set of POSIX
-        signal functionality including real-time and threaded signals.
-        * libc/include/sys/types.h: Add clock_t, time_t, struct
-	timespec, and struct itimerspec.  Centralizing these makes 
-	things cleaner.  RTEMS uses 64-bit dev_t.
-        Added numerous primitive definitions
-        for pthreads including macros, pthread_attr_t,
-	pthread_mutexattr_t, pthread_condattr_t, pthread_key_t, 
-	pthread_once_t, and pthread_t.
-        * libc/include/sys/unistd.h: Added getlogin_r() prototype.
-        If RTEMS follow POSIX on read(), write() and sbrk() prototype.
-        Feature flags removed and moved to new file <sys/features.h>.
-        Full set of POSIX sysconf() constants
-
-2000-12-08  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-	* configure.host: Added x86 linux target.
-	* libc/unix/getpass.c (_PATH_PASSWD, _PASSWORD_LEN): Default
-	definitions provided if not already defined.
-	* libc/sys/linux/crt0.c: New file.
-	* libc/sys/linux/Makefile.am: Ditto.
-	* libc/sys/linux/Makefile.in: Ditto.
-	* libc/sys/linux/aclocal.m4: Ditto.
-	* libc/sys/linux/brk.c: Ditto.
-	* libc/sys/linux/configure: Ditto.
-	* libc/sys/linux/configure.in: Ditto.
-	* libc/sys/linux/getoptlong.c: Ditto.
-	* libc/sys/linux/ids.c: Ditto.
-	* libc/sys/linux/inode.c: Ditto.
-	* libc/sys/linux/io.c: Ditto.
-	* libc/sys/linux/linux.c: Ditto.
-	* libc/sys/linux/process.c: Ditto.
-	* libc/sys/linux/realpath.c: Ditto.
-	* libc/sys/linux/select.c: Ditto.
-	* libc/sys/linux/signal.c: Ditto.
-	* libc/sys/linux/systat.c: Ditto.
-	* libc/sys/linux/termios.c: Ditto.
-	* libc/sys/linux/time.c: Ditto.
-	* libc/sys/linux/wait.c: Ditto.
-	* libc/sys/linux/include/alloca.h: Ditto.
-	* libc/sys/linux/include/getopt.h: Ditto.
-	* libc/sys/linux/include/stdint.h: Ditto.
-	* libc/sys/linux/include/unistd.h: Ditto.
-	* libc/sys/linux/sys/cdefs.h: Ditto.
-	* libc/sys/linux/sys/dirent.h: Ditto.
-	* libc/sys/linux/sys/errno.h: Ditto.
-	* libc/sys/linux/sys/fcntl.h: Ditto.
-	* libc/sys/linux/sys/file.h: Ditto.
-	* libc/sys/linux/sys/ioctl.h: Ditto.
-	* libc/sys/linux/sys/resource.h: Ditto.
-	* libc/sys/linux/sys/signal.h: Ditto.
-	* libc/sys/linux/sys/stat.h: Ditto.
-	* libc/sys/linux/sys/syscall.h: Ditto.
-	* libc/sys/linux/sys/termios.h: Ditto.
-	* libc/sys/linux/sys/time.h: Ditto.
-	* libc/sys/linux/sys/types.h: Ditto.
-	* libc/sys/linux/sys/utmp.h: Ditto.
-	* libc/sys/linux/sys/utsname.h: Ditto.
-	* libc/sys/linux/sys/wait.h: Ditto.
-
-2000-12-08  Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-        * Makefile.am: $(INSTALL), $(INSTALL_DATA), and $(INSTALL_PROGRAM)  
-        can be a relative path to $(top_srcdir)/install.sh so ensure the
-        autoconf detected settings are properly passed recursively.
-        Similarly, add AM_MAKEFLAGS to FLAGS_TO_PASS so they also get passed
-        properly to subdirectories.
-	* Makefile.in: Regenerated.
-
-2000-12-07  Jay Kulpinski <jskulpin@eng01.gdds.com>
-
-        * libc/stdio/vfprintf.c: Minor modification to avoid requiring
-        a floating point register unless really printing a floating
-        point number.
-
-2000-12-07  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/ldtoa.c: Removed include of alloca.h.
-	Also removed \r's.
-	(asctoeg): Replaced alloca call with stack array and malloc
-	when storage exceeds reasonable limit.
-	(e53toe): Fixed einfin calls missing ldp parameter.
-	(eiisinf): Hide behind check for LDBL_MANT_DIG == 64.
-
-2000-12-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-
-	* libc/stdio/vfscanf.c: Fix typo for _NO_LONGDBL macro.
-
-2000-12-06  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/stdlib/Makefile.am: Added ldtoa.c to list of sources.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/stdio/floatio.h: Added suitable MAXEXP for long double.
-	* libc/stdio/vfieeefp.h: Added long double bit structures.
-	* libc/stdio/vfprintf.c[WANT_IO_LONG_DBL]: Added long double support.
-	[WANT_IO_LONG_DBL](isinfl, isnanl): New static long double routines.
-	(exponent): Changed expbuf to reasonable maximum instead of MAXEXP.
-	* libc/stdio/vfscanf.c[WANT_IO_LONG_DBL]: Added long double support.
-	* libc/stdlib/ldtoa.c: New file containing _ldtoa_r and
-	_strtold routines used for conversions between character
-	and long double.
-
-Wed Dec  6 12:01:00 2000  Corinna Vinschen <vinschen@cygnus.com>
-
-	* libc/include/stdlib.h: Add declarations for `mkstemp' and `mktemp'.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/include/machine/time.h: RTEMS systems can configure clock
-	tick rate so use sysconf() to ask.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/include/sys/times.h: Add reference to POSIX standard.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/include/sys/time.h: Added BSD timer manipulation macros
-        used by RTEMS code.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/sys/rtems/crt0.c: Add stubs for functions implicitly
-        referenced by code generated by gcc 2.8.1.
-        (a29k): Add stubs for V_SPILL, V_FILL, V_BSD_OS, V_EPI_OS to 
-	satisfy gcc.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/stdlib/system.c: Avoid compiling do_system() for RTEMS.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * libc/include/ieeefp.h: Added entries for OpenCores CPUs.
-
-2000-12-04  Joel Sherrill <joel@OARcorp.com>
-
-        * configure.host (or16, or32): New entries for OpenCores
-	OpenRisc CPUs.
-        (*-*-rtems*): Add -DNO_EXEC.
-
-2000-12-04  Keith Outwater <vac4050@cae597.rsc.raytheon.com>
-
-        * libc/include/sys/errno.h: Added comments on many error numbers.
-        * libc/string/strerror.c: Added some more strings.
-
-2000-11-30  Jeff Johnston <jjohnstn@redhat.com>
-
-	* libc/sys/sh/syscalls.c (_link): New stub.
-
-2000-11-29  Nick Clifton  <nickc@redhat.com>
-
-	* configure.host: Add xscale target.
-	* libc/machine/xscale: New directory.
-	* libc/machine/xscale/Makefile.am: New file.
-	* libc/machine/xscale/Makefile.in: New file.
-	* libc/machine/xscale/aclocal.m4: New file.
-	* libc/machine/xscale/configure: New file.
-	* libc/machine/xscale/configure.in: New file.
-	* libc/machine/xscale/memchr.S: New file.
-	* libc/machine/xscale/memcmp.S: New file.
-	* libc/machine/xscale/memcpy.S: New file.
-	* libc/machine/xscale/memmove.S: New file.
-	* libc/machine/xscale/memset.S: New file.
-	* libc/machine/xscale/strchr.S: New file.
-	* libc/machine/xscale/strcmp.S: New file.
-	* libc/machine/xscale/strcpy.S: New file.
-	* libc/machine/xscale/strlen.S: New file.
-
-Sat Nov 25 11:24:00 2000  Corinna Vinschen <vinschen@cygnus.com>
-
-	* libc/include/sys/types.h: Change i to `__i' in FD_ZERO macro to
-	avoid compiler warnings.
-
-2000-11-22  Michael Meissner  <meissner@redhat.com>
-
-	* libc/posix/execl.c (execl): Don't reference environ directly,
-	reference it only via a static pointer to avoid problems with some
-	shared library systems and with different uses of small data where
-	the user specifies his own version of environ.
-	* libc/posix/execv.c (execv): Ditto.
-	* libc/stdlib/getenv_r.c (_findenv_r): Ditto.
-	* libc/stdlib/setenv_r.c (_setenv_r,_unsetenv_r): Ditto.
-	* libc/stdlib/system.c (system, !cygwin32 case): Ditto.
-
-	* libc/stdlib/getenv.c (environ): Delete unused reference to
-	environ.
-
-	* libc/stdlib/getenv_r.c: Make initial comment friendlier to emacs
-	colorization.
-	* libc/stdlib/system.c: Ditto.
-
-Tue Nov 21 20:32:21 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/sys/cygwin/sys/dirent.h: Change definition to avoid necessity of
-	including windows headers.
-
-2000-11-20  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/include/sys/unistd.h: Removed definition of MAXNAMLEN.
-	* libc/include/dirent.h: Added definition of MAXNAMLEN if
-	not defined by sys/dirent.h.
-	* libc/posix/execvp.c: Added include of dirent.h to get
-	MAXNAMLEN value which used to be in unistd.h.
-
-Mon Nov  6 12:56:00 2000  Corinna Vinschen <vinschen@cygnus.com>
-
-	* libc/include/sys/types.h: Change type of i to `size_t' in
-	FD_ZERO macro to avoid compiler warnings.
-
-Sun Oct 29 20:06:41 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/stdlib.h: Avoid declaring cfree under Cygwin.
-	* libc/include/malloc.h: Ditto.  Also remove obsolete declaration.
-
-Tue Oct 24 20:16:00 2000  Corinna Vinschen <vinschen@cygnus.com>
-
-	* libc/include/sys/unistd.h: Add defines for sysconf values
-	_SC_NPROCESSORS_CONF, _SC_NPROCESSORS_ONLN, _SC_PHYS_PAGES and
-	_SC_AVPHYS_PAGES.
-
-Mon Oct  9 20:26:33 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/unistd.h: Add getdtablesize and setdtablesize
-	declarations for __CYGWIN__.
-
-2000-09-19  Geoffrey Keating  <geoffk@cygnus.com>
-
-	* libc/signal/signal.c (__sigtramp_r): ISO C requires
-	case labels to be integral constant expressions, so
-	use an if/else tree instead.
-	(_raise_r): Likewise.
-
-2000-09-13  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* libc/machine/v850/setjmp.S: Fixed tab problems caused by
-	clipping patch from e-mail reader.
-
-2000-09-13  Will Cohen  <wcohen@redhat.com>
-
-	* libc/machine/v850/setjmp.S (_setjmp): Save r1 rather than r0.
-	Added return value 0.
-	(_longjmp): Allow longjmp to return value of second argument
-	passed to it.
-
-2000-09-06  Jeff Johnston <jjohnstn@redhat.com>
-
-        * libc/include/sys/types.h (FD_ZERO): Remove call to bzero and
-        inline code to prevent having to include another header file.
-
-Wed Sep  6 15:06:40 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* Makefile.am: Fix space vs. tab problem in install-data-local.
-	* Makefile.in: Regenerate.
-
-Wed Sep  6 13:49:51 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/_ansi.h (_EXFUN): Define specially for __CYGWIN__.
-	(_EXPARM): New macro for defining a function parameter.
-	* libc/include/stdlib.h: Use _EXPARM.
-	* libc/stdlib/mallocr.c: Don't build cfree for Cygwin.
-
-2000-09-05  Manfred Hollstein  <manfredh@redhat.com>
-
-        * Makefile.am (install-data-local): Use optional $(DESTDIR) where
-        required, as documented in the gnu coding standards.
-        * Makefile.in: Regenerate.
-
-2000-09-05  Jeff Johnston <jjohnstn@redhat.com>
-
-	* libc/include/fcntl.h (_FNDELAY): Changed to be _FNONBLOCK to
-	make O_NDELAY and O_NONBLOCK have the same value.
-
-2000-08-30  Kazu Hirata  <kazu@hxi.com>
-
-        * libc/sys/h8300hms/crt0.S: Optimize for both speed and code size.
-
-2000-08-30  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-        * libc/posix/execve.c: included unistd.h for "_execve" prototype.
-        * libc/misc/unctrl.c libc/sys/sysvi386/crt0.c (sccsid): changed
-        "#ifndef lint" to "#if defined(LIBC_SCCS) && !defined(lint)" like
-        everywhere else.
-
-2000-08-30  Geoffrey Keating  <geoffk@cygnus.com>
-
-	* libc/string/swab.c: Specify that it's defined in <unistd.h>.
-	* libc/include/string.h: Don't include <sys/types.h>,
-	as it causes really bad namespace pollution.  Don't declare
-	swab(), it is properly declared in unistd.h.
-
-2000-08-29  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-        * libc/unix/getpwent.c (getpwnam, getpwuid, getpwent): removed
-        (broken) support for non-existent /etc/passwd field "comment".
-
-2000-08-27  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-        * libc/posix/scandir.c (DIRSIZ, scandir): use struct dirent.d_namlen
-        only if _DIRENT_HAVE_D_NAMLEN is defined.
-        (alphasort): aligned prototype with
-        libc/sys/cygwin/sys/dirent.h and simplified function body.
-        * libc/posix/telldir.c (telldir): changed "telldir" prototype to
-        long telldir (DIR *) as mentioned in annex B of POSIX.1
-
-2000-08-27  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-        * libc/machine/i386/i386mach.h: added SOTYPE_FUNCTION to set type
-        of global entry points if _I386MACH_NEED_SOTYPE_FUNCTION is defined;
-        Added __CLI and __STI macros (controlled via
-        _I386MACH_ALLOW_HW_INTERRUPTS macro).
-        * libc/machine/i386/f_atan2.S libc/machine/i386/f_atan2f.S
-        libc/machine/i386/f_frexp.S libc/machine/i386/f_frexpf.S
-        libc/machine/i386/f_ldexp.S libc/machine/i386/f_ldexpf.S
-        libc/machine/i386/f_log.S libc/machine/i386/f_log10.S
-        libc/machine/i386/f_log10f.S libc/machine/i386/f_logf.S
-        libc/machine/i386/f_tan.S libc/machine/i386/f_tanf.S
-        libc/machine/i386/memchr.S libc/machine/i386/memcmp.S
-        libc/machine/i386/memcpy.S libc/machine/i386/memmove.S
-        libc/machine/i386/memset.S libc/machine/i386/setjmp.S
-        libc/machine/i386/strchr.S libc/machine/i386/strlen.S:
-        (that's libc/machine/i386/*.S) added SOTYPE_FUNCTION(symbol)
-        for all global entry points.
-        * libc/machine/i386/setjmp.S: removed code replicated in
-        libc/machine/i386/i386mach.h and included i386mach.h instead;
-        Use __CLI and __STI instead of cli and sti.
-
-2000-08-25  DJ Delorie  <dj@redhat.com>
-
-	* libc/include/sys/unistd.h (environ): this one isn't from the
-	DLL, no __IMPORT
-
-Fri Aug 25 13:37:11 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/stdlib/system.c (do_system): Eliminate explicit declaration of
-	environ when compiling under cygwin since it is already declared in
-	unistd.h.
-
-2000-08-23  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-	* libc/stdlib/mprec.c (ulp, b2d, d2b): changed a few expressions
-	like  x << y-z  to the equivalent  x << (y-z).
-	(d2b): changed if statements with assignment to perform the
-	assignment prior to the if check.
-	* libc/reent/reent.c: included stdlib.h for "_free_r" prototype.
-	* libc/unix/getpass.c (getpass): moved "echo" assignment out of if.
-	* libc/unix/ttyname.c: included string.h for "strcpy" prototype.
-	* libc/unix/getcwd.c (ISDOT): added parentheses to clarify && and ||
-	precedence.
-	* libc/include/sys/unistd.h: added "vfork" prototype (for popen.c).
-	Added "_execve" prototype (for execl.c, execle.c, execv.c, and 
-	execve.c).
-	* libc/posix/popen.c (popen): added parentheses to clarify && and ||
-	precedence.
-	* libm/math/e_cosh.c (__ieee754_cosh): changed parentheses to
-	clarify && and || precendence (and to remove pascalism).
-	* libm/math/e_sinh.c (__ieee754_sinh): Ditto.
-	* libm/math/s_infconst.c: added another pair of braces to all
-	initializers for __infinity (need three: for __infinity[1] array,
-	for union __dmath, and for i[2]).
-
-2000-08-23  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-	* libc/stdlib/abort.c: changed description: uses "raise" instead of
-	"getpid" and "kill"; added: uses "write" and "_exit".
-	Also included unistd.h for "_exit" prototype.
-	* libc/stdlib/system.c: included unistd.h for "execve" prototype,
-	reent.h for "_fork_r" and "_wait_r" prototypes.
-	(do_system): changed  extern char *environ[] to POSIX-friendly 
-	extern char **environ.
-	* libc/stdlib/wctomb_r.c: included string.h for "strlen" and "strcmp"
-	prototypes.
-	* libc/stdlib/remove.c: included reent.h for "_unlink_r" prototype.
-	* libc/reent/execr.c: included sys/wait.h for "wait" prototype.
-	* libc/reent/fstatr.c: included sys/stat.h for "fstat" prototype.
-	* libc/reent/openr.c: included fcntl.h for "open" prototype.
-	* libc/reent/signalr.c: included signal.h for "kill" prototype,
-	unistd.h for "getpid" prototype.
-	* libc/reent/statr.c: included sys/stat.h for "stat" prototype.
-	* libc/reent/timer.c: included sys/time.h for "gettimeofday" prototype.
-	* libc/unix/getut.c (utmpname): removed local, incorrect "strdup"
-	prototype.  Also included stdlib.h for "abort", string.h for
-	"strdup" and "strncmp" prototypes.
-	* libc/unix/getlogin.c: included string.h for "strncmp", "memset", and
-	"strncpy", unistd.h for "read" and "close" prototypes.
-	* libc/posix/execvp.c: included string.h for "strchr", "strlen", and
-	"strcat" prototypes.
-
-2000-08-23  Werner Almesberger  <Wernen Almesberger@epfl.ch>
-
-	* libc/stdio/stdio.c (__swrite): declare "oldmode" only if it's
-	used later (ifdef __SCLE)
-	* libc/stdio/vfscanf.c (__svfscanf): declare "state" only if it's
-	used later (ifdef MB_CAPABLE)
-	* libc/string/memset.c (memset): removed unused variables "count"
-	and "unaligned_addr"
-	* libc/locale/locale.c (_setlocale_r): declare "lc_ctype" and
-	"last_lc_ctype" only of they're used later (ifdef MB_CAPABLE)
-	* libc/unix/getpwent.c (getpwnam): removed unused variables "uid"
-	and "gid"
-
-2000-08-23  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-        * libc/stdlib/envlock.c: changed documented "__env_lock" and
-        "__env_unlock" prototype from "void *" or "char *" to
-        "struct _reent *" to match real function.  Also added include
-	of envlock.h.
-        * libc/stdlib/mlock.c: changed documented "__malloc_lock" and
-        "__malloc_unlock" prototype from "void *" or "char *" to
-        "struct _reent *" to match real function.
-        * libc/stdlib/envlock.h: added "__env_lock" and "__env_unlock"
-        prototypes (for getenv_r.c and setenv_r.c).
-
-2000-08-22  Werner Almesberger  <Werner.Almesberger@epfl.ch>
-
-	* libc/unix/getut.c (utmpname): added _CONST to reflect common use
-	and prototype in cygwin's utmp.h
-
-2000-08-16  Eric Fifer  <efifer@sanwaint.com>
-
-        * libc/stdio/vfprintf.c (_vfprintf_r): suppress . with "%.0f", 0.1
-
-2000-08-09  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/setjmp.S: Recode to clean up function prologues and
-	epilogue and to allow the functions to be used in a Thumb based
-	toolchain.
-
-2000-08-08  Jeff Johnston <jjohnstn@redhat.com>
-
-	* libc/stdio/snprintf.c (snprintf, _snprintf_r): Fixed code
-	so size of 0 results in nothing being written to string.
-	Also fixed code so that when size is non-zero, there is only
-	a maximum of size - 1 characters written to the array and
-	a nul terminator is appended at the end.
-	* libc/stdio/vsnprintf.c (vsnprintf, _vsnprintf_r): Ditto.
-
-2000-08-01  DJ Delorie  <dj@redhat.com>
-
-	* libc/include/sys/config.h: define __IMPORT appropriately
-	* libc/include/ctype.h (_ctype_): use __IMPORT
-	* libc/include/math.h (__infinity, signam, _LIB_VERSION): ditto
-	* libc/include/math.h (__mb_cur_max): ditto
-	* libc/include/time.h (_timezone, _daylight, _tzname): ditto
-	* libc/include/unctrl.h (__unctrl, __unctrllen): ditto
-	* libc/include/errno.h (_sys_errlist, _sys_nerr): ditto
-	* libc/include/unistd.h (environ): ditto
-
-2000-07-28  Michael Meissner  <meissner@redhat.com>
-
-	* libc/include/math.h (__infinity): Declare as an array without
-	bounds to get around small data support.  Rewrite Cygwin support
-	to be more general.
-	* libm/math/s_infconst.c (__infinity): Ditto.
-	* libm/mathfp/s_infconst.c (__infinity): Ditto.
-
-Thu Jul 27 10:46:01 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/math.h: Use appropriate dll import linkage for
-	__infinity under Cygwin.
-
-2000-07-13  DJ Delorie  <dj@cygnus.com>
-
-	* libc/stdio/vfprintf.c: pad 0.0 correctly with %e
-
-Wed Jun 28 14:08:00 2000  Keith Walker  <keith.walker@arm.com>
-
-	* libc/sys/arm/crt0.S (.LC30): Added missing length parameter
-	to argument list for AngelSWI_Reason_GetCmdLine.
-
-Tue Jun 27 15:49:00 2000  Marek Michalkiewicz  <marekm@linux.org.pl>
-
-	* configure.host: Add support for AVR target.
-	* libc/include/machine/ieeefp.h: Likewise.
-	* libc/include/sys/config.h: Likewise.
-
-Thu Jun 22 18:35:00 2000  Ranjith Kumaran  <ranjith@cygnus.com>
-
-	* README: Newlib 1.8.2 must be built in a separate directory
-	than the sources.
-
-Tue Jun 20 14:30:00 2000  Jeff Johnston  <jjohnstn@cygnus.com>
-
-        * libc/include/sys/reent.h (_rand_next): Added __extension__
-        qualifier as long long type is not strict ANSI.
-        * libc/stdlib/rand.c (rand): Added __extension__ qualifier
-        to long long constant.
-
-Fri Jun 16 23:02:00 2000  Corinna Vinschen <corinna@vinschen.de>
-
-        * libc/include/sys/unistd.h: Add prototypes for `seteuid' and
-        `setegid' provided by Cygwin.
-
-Thu Jun 15  0:21:00 2000  Corinna Vinschen <corinna@vinschen.de>
-
-        * libc/stdio/fdopen.c: Take explicit given bin/textmode into
-        account for Cygwin.
-
-Fri Jun  9 14:28:00 2000  Jeff Johnston  <jjohnstn@cygnus.com>
-
-        * libc/include/sys/reent.h (_rand_next): Changed to
-        unsigned long long and moved to end of _reent struct in _new union.
-        (_REENT_INIT): Changed to move _rand_next initialization.
-        * libc/stdlib/rand.c (rand): Changed to use unsigned long long
-        linear congruential algorithm that is used by DJGPP.
-
-Thu Jun  8 21:18:00 2000  Ranjith Kumaran  <ranjith@cygnus.com>
-
-	* libc/include/stdlib.h: Set RAND_MAX to __RAND_MAX.
-	* libc/include/sys/config.h: Define __RAND_MAX.
-
-Thu Jun  8 17:54:00 2000  Jeff Johnston  <jjohnstn@cygnus.com>
-
-        * libc/stdlib/rand_r.c: New algorithm that meets minimal
-        standard.
-
-Fri Jun  2 23:02:11 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/string.h: Work around problem with strsignal and gdb.
-
-Tue May 30 13:13:01 2000  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/ctype.h: __CYGWIN32__ -> __CYGWIN__
-	* libc/include/malloc.h: Ditto.
-	* libc/include/process.h: Ditto.
-	* libc/include/stdio.h: Ditto.
-	* libc/include/stdlib.h: Ditto.
-	* libc/include/time.h: Ditto.
-	* libc/include/machine/setjmp.h: Ditto.
-	* libc/include/sys/errno.h: Ditto.
-	* libc/include/sys/signal.h: Ditto.
-	* libc/include/sys/stat.h: Ditto.
-	* libc/include/sys/time.h: Ditto.
-	* libc/include/sys/unistd.h: Ditto.
-	* libc/include/string.h: Ditto.  strsignal should return a const char *.
-
-2000-05-26  Marek Michalkiewicz  <marekm@linux.org.pl>
-
-	* libm/common/s_expm1.c (expm1): Add curly braces, avoid warnings.
-	* libm/common/s_log1p.c (log1p): Likewise.
-	* libm/common/s_scalbn.c (scalbn): Likewise.
-	* libm/math/e_log.c: Likewise.
-	* libm/math/e_asin.c: Likewise.
-	* libm/math/ef_asin.c: Likewise.
-	* libm/math/e_j0.c (pzero, qzero): Remove redundant test.
-	* libm/math/e_j1.c (pone, qone): Likewise.
-	* libm/math/ef_j0.c (pzerof, qzerof): Likewise.
-	* libm/math/ef_j1.c (ponef, qonef): Likewise.
-	* libm/mathfp/e_j0.c (pzero, qzero): Likewise.
-	* libm/mathfp/e_j1.c (pone, qone): Likewise.
-	* libm/mathfp/ef_j0.c (pzerof, qzerof): Likewise.
-	* libm/mathfp/ef_j1.c (ponef, qonef): Likewise.
-
-2000-05-19  DJ Delorie  <dj@cygnus.com>
-
-	* libc/stdio/stdio.c (__stextmode): new, see if file is text mode
-	(__sread): always read in binary mode
-	(__swrite): always write in binary mode
-	* libc/include/stdio.h: no getc/putc macros for cygwin; causes
-	compatibility issues with different dll versions
-	* libc/stdio/fopen.c: use __stextmode
-	* libc/stdio/fdopen.c: ditto
-	* libc/stdio/freopen.c: ditto
-	* libc/stdio/findfp.c: set up __SCLE for std{in,out,err}
-	* libc/stdio/local.h: declare __stextmode
-	
-2000-05-18  DJ Delorie  <dj@cygnus.com>
-
-	* libc/stdio/fgets.c (fgets): perform CRLF conversions if __SCLE
-	
-Mon May 15 18:54:00 2000  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/include/ctype.h: Changed tolower and toupper macros
-	to use __extension__ to prevent pedantic warnings.
-
-Mon May 15 14:26:00 2000  Joel Sherrill  <joel@oarcorp.com>
-
-	* libc/sys/rtems/sys/time.h: Add macros for manipulating timeval
-	structures.
-
-Wed May 10 19:24:53 2000  Jim Wilson  <wilson@cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Add ia64 support.
-	* configure.host: Likewise.
-
-Wed May 10 13:52:24 2000  Egor Duda <deo@logos-m.ru>
-
-        * libc/time/asctime_r.c (asctime_r): Change output format. Day of
-        month is now padded with space, not zero.  This now conforms to
-	ANSI standard.
-
-Wed May 03 17:57:00 2000  Corinna Vinschen <corinna@vinschen.de>
-
-        * libc/include/sys/errno.h: Add define for ENOSHARE ("No such
-        host or network path") used by cygwin. Add some comments.
-
-Tue May 02 23:45:48 2000  DJ Delorie  <dj@cygnus.com>
-
-	* libc/include/stdio.h (FILE): define __SCLE for "convert line
-	endings" for Cygwin.
-	(__sgetc): convert line endings if needed
-	(__sputc): ditto
-	* libc/stdio/fdopen.c (_fdopen_r): Remember if we opened in text mode
-	* libc/stdio/fopen.c (_fopen_r): ditto
-	* libc/stdio/freopen.c (freopen): ditto
-	* libc/stdio/fread.c (fread): perform CRLF conversions if __SCLE
-	* libc/stdio/fvwrite.c (__sfvwrite): ditto
-
-Thu Apr 27 07:45:48 2000  Alexandre Oliva  <aoliva@cygnus.com>
-
-	* libc/machine/mn10300/setjmp.S (setjmp, longjmp): Use
-	post-increment when it is worth it, spacewise.
-
-Mon Apr 17 12:46:00 2000  Marek Michalkiewicz <marekm@linux.org.pl>
-
-	* libc/signal/signal.c (_signal_r) : Removed unused local variable temp.
-	* libc/stdio/findfp.c (std): Added declaration of flags and file.
-	* libc/stdio/mktemp.c (_gettemp, _mkstemp_r, mkstemp): Added int 
-	return type.
-	* libc/stdio/putchar.c (putchar): Added return statement.
-	* libc/stdio/refill.c (lflush): Added correct parentheses.
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Ditto.
-	* libc/stdio/vfscanf.c (__svfscanf): Changed sprintf call which 
-	prints long value to use l qualifier.
-	* libc/stdlib/dtoa.c (_dtoa_r): Added parentheses to remove warning
-	messages and initialized local values: ilim, ilim1, and spec_case.
-	* libc/stdlib/ecvtbuf.c (print_e): Removed unused variable dp.
-	* libc/stdlib/mbctype.h (_issjis1, _issjis2): Added parentheses.
-	* libc/stdlib/mprec.c: Ditto.
-	* libc/stdlib/setenv_r.c: Ditto.
-	* libc/stdlib/strtod.c: Ditto.
-	* libc/stdlib/strtol.c: Ditto.
-	* libc/stdlib/strtoul.c: Ditto.
-	* libm/common/sf_expm1.c: Added curly braces to if else clauses.
-	* libm/common/sf_log1p.c: Ditto.
-	* libm/common/sf_scalbn.c: Ditto.
-	* libm/math/ef_log.c: Ditto.
-
-Sun Apr 16 12:45:00 2000  Corinna Vinschen <corinna@vinschen.de>
-
-        * libc/posix/execvp.c (execvp): Check path for
-        trailing slash.
-
-Fri Mar 31 20:39:00 2000  Corinna Vinschen <corinna@vinschen.de>
-
-        * libc/include/sys/unistd.h: Add prototypes for
-        fchmod, fchown, lchown.
-
-Fri Mar 24 15:34:00 2000  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* acinclude.m4: Changed release to 1.8.2.
-	* aclocal.m4 configure doc/aclocal.m4 doc/configure
-	  libc/aclocal.m4 libc/configure libc/machine/aclocal.m4
-	  libc/machine/configure libc/machine/a29k/aclocal.m4
-	  libc/machine/a29k/configure libc/machine/arm/aclocal.m4
-	  libc/machine/arm/configure libc/machine/d10v/aclocal.m4
-	  libc/machine/d10v/configure libc/machine/d30v/aclocal.m4
-	  libc/machine/d30v/configure libc/machine/fr30/aclocal.m4
-	  libc/machine/fr30/configure libc/machine/h8300/aclocal.m4
-	  libc/machine/h8300/configure libc/machine/h8500/aclocal.m4
-	  libc/machine/h8500/configure libc/machine/hppa/aclocal.m4
-	  libc/machine/hppa/configure libc/machine/i386/aclocal.m4
-	  libc/machine/i386/configure libc/machine/i960/aclocal.m4
-	  libc/machine/i960/configure libc/machine/m32r/aclocal.m4
-	  libc/machine/m32r/configure libc/machine/m68k/aclocal.m4
-	  libc/machine/m68k/configure libc/machine/m88k/aclocal.m4
-	  libc/machine/m88k/configure libc/machine/mips/aclocal.m4
-	  libc/machine/mips/configure libc/machine/mn10200/aclocal.m4
-	  libc/machine/mn10200/configure libc/machine/mn10300/aclocal.m4
-	  libc/machine/mn10300/configure libc/machine/necv70/aclocal.m4
-	  libc/machine/necv70/configure libc/machine/powerpc/aclocal.m4
-	  libc/machine/powerpc/configure libc/machine/sh/aclocal.m4
-	  libc/machine/sh/configure libc/machine/sparc/aclocal.m4
-	  libc/machine/sparc/configure libc/machine/tic80/aclocal.m4
-	  libc/machine/tic80/configure libc/machine/v850/aclocal.m4
-	  libc/machine/v850/configure libc/machine/w65/aclocal.m4
-	  libc/machine/w65/configure libc/machine/z8k/aclocal.m4
-	  libc/machine/z8k/configure libc/sys/aclocal.m4
-	  libc/sys/aclocal.m4 libc/sys/configure
-	  libc/sys/a29khif/aclocal.m4 libc/sys/a29khif/configure
-	  libc/sys/arm/aclocal.m4 libc/sys/arm/configure
-	  libc/sys/cygwin/aclocal.m4 libc/sys/cygwin/configure
-	  libc/sys/d10v/aclocal.m4 libc/sys/d10v/configure
-	  libc/sys/decstation/aclocal.m4 libc/sys/decstation/configure
-	  libc/sys/go32/aclocal.m4 libc/sys/go32/configure
-	  libc/sys/h8300hms/aclocal.m4 libc/sys/h8300hms/configure
-	  libc/sys/h8500hms/aclocal.m4 libc/sys/h8500hms/configure
-	  libc/sys/m88kbug/aclocal.m4 libc/sys/m88kbug/configure
-	  libc/sys/netware/aclocal.m4 libc/sys/netware/configure
-	  libc/sys/rtems/aclocal.m4 libc/sys/rtems/configure
-	  libc/sys/sh/aclocal.m4 libc/sys/sh/configure
-	  libc/sys/sparc64/aclocal.m4 libc/sys/sparc64/configure
-	  libc/sys/sun4/aclocal.m4 libc/sys/sun4/configure
-	  libc/sys/sysmec/aclocal.m4 libc/sys/sysmec/configure
-	  libc/sys/sysnec810/aclocal.m4 libc/sys/sysnec810/configure
-	  libc/sys/sysnecv850/aclocal.m4 libc/sys/sysnecv850/configure
-	  libc/sys/sysvi386/aclocal.m4 libc/sys/sysvi386/configure
-	  libc/sys/sysvnecv70/aclocal.m4 libc/sys/sysvnecv70/configure
-	  libc/sys/tic80/aclocal.m4 libc/sys/tic80/configure
-	  libc/sys/w65/aclocal.m4 libc/sys/w65/configure
-	  libc/sys/z8ksim/aclocal.m4 libc/sys/z8ksim/configure
-	  libm/aclocal.m4 libm/configure: Regenerated.
-
-2000-03-24  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c: Fix compile time warnings.
-	(do_AngelSWI): Add "cc" to list o registers clobbered.
-
-Thu Mar 22 14:57:00 2000  Fernando Nasser <fnasser@redhat.com>
-
-	* libc/sys/arm/syscalls.c (do_AngelSWI): Prevent registers with valid
-	information to be clobbered by an Angel C library support syscall. 
-
-Tue Mar 21 19:08:00 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdlib/envlock.c: Fixed comment typo.
-
-Fri Mar 17 15:37:00 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdio/vfscanf.c (__svfscanf): Fixed floating point
-	code to update nread as each character is processed instead
-	of using buffer contents which throw away leading zeroes.
-
-Mon Mar 13 15:22:00 2000  Sergei Organov <osv@javad.ru>
-
-        * libm/mathfp/sf_sqrt.c: Change _DOUBLE_IS_32BITS sqrt call to sqrtf.
-
-Fri Mar 10 16:09:20 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/include/string.h: Include <sys/types.h>.
-
-Fri Mar 10 14:53:50 2000  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
-
-	* libc/stdio/putw.c (putw): Return 0 on success, to be compliant
-	with XSH5, not SVID.
-
-Thu Mar  9 17:20:41 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-        * libc/include/string.h: Changed last argument back to ssize_t
-	to make it compatible with XPG4 definition which is 
-	defined in <unistd.h>.  There is a conflict in the SVID 3
-	and XPG4 definitions and newlib will settle with XPG4.
-        * libc/string/swab.c: Ditto.
-
-Wed Mar  8 17:11:41 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-        * libc/include/string.h: Changed last argument to size_t.
-        * libc/string/swab.c: Changed last argument to size_t.
-
-Wed Mar  8 00:46:41 2000  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
-
-	* libc/reent/Makefile.am (lib_a_SOURCES): Added unlinkr.c.
-	(CHEWOUT_FILES): Added unlinkr.def.
-	* libc/reent/Makefile.in: Rebuilt.
-	* libc/sys.tex: Include unlinkr.def.
-	* libc/reent/linkr.c (_unlink_r): Moved to...
-	* libc/reent/unlinkr.c: ... new file.
-
-Wed Mar  8 00:43:07 2000  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
-
-	* libc/string/Makefile.am (lib_a_SOURCES): Added swab.c.
-	(CHEWOUT_FILES): Added swab.def.
-	* libc/string/Makefile.in: Rebuilt.
-	* libc/string/string.tex: Include swab.def.
-	* libc/include/string.h (swab): Declare.
-	* libc/string/swab.c: New file.
-
-Wed Mar  8 00:38:35 2000  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
-
-	* libc/stdio/Makefile.am (lib_a_SOURCES): Added getw.c and putw.c.
-	(CHEWOUT_FILES): Added getw.def and putw.def.
-	* libc/stdio/Makefile.in: Rebuilt.
-	* libc/stdio/stdio.tex: Include getw.def and putw.def.
-	* libc/stdio/getw.c: New file.
-	* libc/stdio/putw.c: New file.
-
-Fri Feb 25 14:50:50 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdio/flags.c (__sflags): Added check that mode[1]
-	is non-null before looking at mode[2].
-
-Thu Feb 24 11:43:00 2000  Ran Cabell <rcabell@norfolk.infi.net>
-
-	* libm/mathfp/sf_atan2.c: Fix atan2 typo for _DOUBLE_IS_32_BITS.
-	* libm/mathfp/sf_atan.c: Ditto.
-
-Thu Feb 24 11:39:00 2000  Joel Sherrill <joel@OARcorp.com>
-
-	* libc/include/sys/stat.h: Add RTEMS prototype for lstat.
-
-Tue Feb 22 14:37:00 2000  Ran Cabell <rcabell@norfolk.infi.net>
-
-	* libm/mathfp/sf_exp.c: Corrected _DOUBLE_IS_32_BITS to be
-	_DOUBLE_IS_32BITS.
-
-Mon Feb 21 11:43:50 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdio/vfprintf.c (VFPRINTF): Added CHECK_INIT
-	call prior to calling _VFPRINTF_R so reentrant data area is set.
-	(_VFPRINTF_R): Removed now extraneous CHECK_INIT call.
-
-Thu Feb 17 01:42:50 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/stdio/vfscanf.c (limits.h): #include.
-	(MAX_LONG_LEN): #define.
-	(__svfscanf): Handle floating point numbers with arbitrary amounts
-	of leading zeroes.
-
-2000-02-15  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_fstat): Initialise all fields to
-	zero.  Set the blocksize to 1024/
-
-Thu Jan 20 18:57:00 2000  Fernando Nasser <fnasser@redhat.com>
-
-	* setvbuf.c (setvbuf):  Set size to BUFSIZ when passed a zero size
-	with line buffering.
-
-Mon Jan 10 18:43:00 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* acinclude.m4: Changed include directory for winsup headers. 
-	* aclocal.m4 configure libc/aclocal.m4
-	  libc/configure libc/ctype/Makefile.in libc/errno/Makefile.in
-	  libc/locale/Makefile.in libc/machine/aclocal.m4
-	  libc/machine/configure libc/machine/a29k/aclocal.m4
-	  libc/machine/a29k/configure libc/machine/arm/aclocal.m4
-	  libc/machine/arm/configure libc/machine/d10v/aclocal.m4
-	  libc/machine/d10v/configure libc/machine/d30v/aclocal.m4
-	  libc/machine/d30v/configure libc/machine/fr30/aclocal.m4
-	  libc/machine/fr30/configure
-	  libc/machine/h8300/aclocal.m4
-	  libc/machine/h8300/configure libc/machine/h8500/aclocal.m4
-	  libc/machine/h8500/configure libc/machine/hppa/aclocal.m4
-	  libc/machine/hppa/configure libc/machine/i386/aclocal.m4
-	  libc/machine/i386/configure libc/machine/i960/aclocal.m4
-	  libc/machine/i960/configure libc/machine/m32r/aclocal.m4
-	  libc/machine/m32r/configure libc/machine/m68k/aclocal.m4
-	  libc/machine/m68k/configure libc/machine/m88k/aclocal.m4
-	  libc/machine/m88k/configure libc/machine/mips/aclocal.m4
-	  libc/machine/mips/configure libc/machine/mn10200/aclocal.m4
-	  libc/machine/mn10200/configure libc/machine/mn10300/aclocal.m4
-	  libc/machine/mn10300/configure libc/machine/necv70/aclocal.m4
-	  libc/machine/necv70/configure libc/machine/powerpc/aclocal.m4
-	  libc/machine/powerpc/configure 
-	  libc/machine/sh/aclocal.m4
-	  libc/machine/sh/configure libc/machine/sparc/aclocal.m4
-	  libc/machine/sparc/configure
-	  libc/machine/tic80/aclocal.m4 libc/machine/tic80/configure
-	  libc/machine/v850/aclocal.m4 libc/machine/v850/configure
-	  libc/machine/w65/aclocal.m4 libc/machine/w65/configure
-	  libc/machine/z8k/aclocal.m4 libc/machine/z8k/configure
-	  libc/misc/Makefile.in libc/posix/Makefile.in
-	  libc/reent/Makefile.in 
-	  libc/signal/Makefile.in
-	  libc/string/Makefile.in libc/sys/aclocal.m4 libc/sys/configure
-	  libc/sys/a29khif/aclocal.m4 libc/sys/a29khif/configure
-	  libc/sys/arm/Makefile.in libc/sys/arm/aclocal.m4
-	  libc/sys/arm/configure libc/sys/cygwin/aclocal.m4
-	  libc/sys/cygwin/configure libc/sys/d10v/Makefile.in
-	  libc/sys/d10v/aclocal.m4 libc/sys/d10v/configure
-	  libc/sys/decstation/aclocal.m4 libc/sys/decstation/configure
-	  libc/sys/go32/aclocal.m4 libc/sys/go32/configure
-	  libc/sys/h8300hms/aclocal.m4 libc/sys/h8300hms/configure
-	  libc/sys/h8500hms/aclocal.m4 libc/sys/h8500hms/configure
-	  libc/sys/m88kbug/aclocal.m4 libc/sys/m88kbug/configure
-	  libc/sys/netware/aclocal.m4 libc/sys/netware/configure
-	  libc/sys/rtems/aclocal.m4 libc/sys/rtems/configure
-	  libc/sys/sh/Makefile.in libc/sys/sh/aclocal.m4
-	  libc/sys/sh/configure libc/sys/sparc64/aclocal.m4
-	  libc/sys/sparc64/configure libc/sys/sun4/aclocal.m4
-	  libc/sys/sun4/configure libc/sys/sysmec/aclocal.m4
-	  libc/sys/sysmec/configure libc/sys/sysnec810/aclocal.m4
-	  libc/sys/sysnec810/configure libc/sys/sysnecv850/aclocal.m4
-	  libc/sys/sysnecv850/configure libc/sys/sysvi386/aclocal.m4
-	  libc/sys/sysvi386/configure libc/sys/sysvnecv70/aclocal.m4
-	  libc/sys/sysvnecv70/configure libc/sys/tic80/aclocal.m4
-	  libc/sys/tic80/configure libc/sys/w65/aclocal.m4
-	  libc/sys/w65/configure libc/sys/z8ksim/aclocal.m4
-	  libc/sys/z8ksim/configure libc/syscalls/Makefile.in
-	  libc/time/Makefile.in libc/unix/Makefile.in libm/aclocal.m4
-	  libm/configure: Regenerated.
-
-Mon Jan 10 18:43:46 2000  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdlib/putenv_r.c (_putenv_r): New file.
-	* libc/stdlib/strdup_r.c (_strdup_r): New file.
-	* libc/include/string.h: Added _strdup_r.
-	* libc/stdlib/putenv.c: Added call to reentrant version. 
-	* libc/stdlib/strdup.c: Ditto.
-	* libc/stdlib/Makefile.am: Added _putenv_r and _unsetenv_r.
-	* libc/include/stdlib.h: Ditto.
-	* libc/stdlib/Makefile.in: Regenerated. 
-	* libc/string/Makefile.in: Regenerated.
-	* libc/stdlib/setenv.c: Added reentrant version of unsetenv.
-	* libc/stdlib/setenv_r.c: Added unsetenv_r and changed memory
-	management calls to reentrant versions.
-	* libc/stdlib/wcstombs.c: Added #ifndef _REENT_ONLY wrapper.
-	* libc/stdlib/wctomb.c: Ditto.
-	* libc/stdlib/mblen.c: Ditto.
-	* libc/stdlib/mbstowcs.c: Ditto.
-	* libc/stdlib/mbtowc.c: Ditto. 
-	* libc/stdlib/getenv.c: Ditto.
-	* libc/reent/reent.tex: Added references to _putenv_r, _setenv_r,
-	and _strdup_r.
-
-Thu Jan  6 15:33:46 2000  Christopher Faylor <cgf@cygnus.com>
-
-	patch from Corinna Vinschen <corinna@vinschen.de>
-	* libc/sys/cygwin/sys/param.h: Define NGROUP_MAX as 16.
-
-Mon Jan 03 14:36:00 2000  Sergei Organov <osv@javad.ru>
-
-	* libm/mathfp/s_atangent.c: Fix exponent calculation.
-	* libm/mathfp/s_ldexp.c: Ditto.
-	* libm/mathfp/sf_atangent.c: Ditto.
-	* libm/mathfp/sf_ldexp.c: Ditto.
-
-Tue Dec 14 5:42:00 1999  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* libc/machine/i960/setjmp.S: fix typo leaving .link_pix uncommented
-	* libc/include/locale.h: define NULL to be 0.
-
-Tue Dec  7 15:41:45 1999  Jim Wilson  <wilson@cygnus.com>
-
-	* libc/sys/sh/syscalls.c (stack_ptr): Move definition before first
-	function.
-
-Wed Dec  1 17:39:29 1999  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/machine/mn10300/setjmp.S: Handle am33.
-
-1999-11-26  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c: Add function prototypes.
-	(stack_ptr): Move declaration before function definitions.
-
-Sat Nov 20 17:13:00 1999  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* NEWS: Updated version information.
-	* README: Ditto.
-
-Tue Nov 09 12:19:21 1999  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/machine/i386/strchr.S: Fixed alignment test.
-
-Thu Oct 28 05:30:46 1999  Andrew Cagney  <cagney@makita.cygnus.com>
-
-	* libc/sys/d10v/crt0.S (_start): Construct a real stack frame.
-
-Thu Oct 28 15:29:11 1999  Andrew Cagney  <cagney@b1.cygnus.com>
-
-	* libc/sys/d10v/crt0.S (_start): Initialize both SPI and SPU
- 	ensuring that there is space between the two.
-
-Thu Oct 14 13:39:21 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/stdio/flags.c: Conditionalize check for 't' for cygwin case
-	only.
-
-1999-10-08  Vadim Egorov  <egorovv@1c.ru>
-
-	* libc/include/stdlib.h: add ptsname, grantpt, unlockpt to cygwin
-	section
-
-Sat Oct  2 02:02:00 MEST 1999  Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* libc/machine/sh/asm.h: Added __SH4_SINGLE__ to DELAYED_BRANCHES
-	* libc/machine/sh/memcpy.S: Fix line wrapping in SL macro
-
-Fri Oct  1 13:17:59 CDT 1999  <joel@OARcorp.com>
-	* libc/include/grp.h: Added getgrnam_r and getgrgid_r prototypes
-	  per POSIX 1003.1b.
-	* libc/include/pwd.h: Added getpwnam_r and getpwuid_r prototypes
-	  per POSIX 1003.1b.
-
-1999-09-13  DJ Delorie  <dj@cygnus.com>
-
-	* libc/stdio/mktemp.c (_gettemp): on cygwin, check for EACCESS
-	also.
-
-Thu Sep  9 15:31:00 1999  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* setvbuf.c (setvbuf):  When mallocing a buffer of size BUFSIZ,
-	also note BUFSIZ as its size.
-
-Tue Sep  7 17:15:00 1999  Joel Sherrill <joel@OARcorp.com>
-
-	* configure.host: Corrected feature defines for RTEMS.
-	* libc/include/sys/stat.h: Added protototype for RTEMS mknod.
-	* libc/include/sys/stat.h: mkfifo() should take const path arg.
-	* libc/include/sys/unistd.h: pathconf() should take const path arg.
-	  Enabled usleep(), ftruncate(), and truncate() prototypes for RTEMS.
-	  Added defines for _POSIX_JOB_CONTROL, _POSIX_SAVED_IDS, and
-	  _POSIX_VERSION for RTEMS.  Added defines for _PC_ASYNC_IO,
-	  _PC_PRIO_IO, and _PC_SYNC_IO.
-	* libc/machine/m68k/Makefile.am: Added strcpy.c and strlen.c.
-	* libc/machine/m68k/Makefile.in: Regenerated.
-	* libc/machine/m68k/strcpy.c: New file.
-	* libc/machine/m68k/strlen.c: New file.
-	* libc/stdio/tmpnam.c: Always make the returned name usable.
-	* libc/sys/rtems/crt0.c: New version that passes all autoconf tests.
-	* libc/sys/rtems/sys/dirent.h: New file.
-	* libc/sys/rtems/sys/types.h: Added dev_t.
-
-Tue Sep  7 17:15:00 1999   Jay Kulpinski <jskulpin@eng01.gdds.com>
-
-	* libc/stdlib/mprec.c: Fixed unitialized variable problem.
-
-Fri Sep  3 12:35:20 1999  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdio/ftell.c (ftell): Backing off Joern's fix and
-	my patch.
-
-Thu Sep  2 22:05:20 1999  Christopher Faylor <cgf@cygnus.com>
-
-	patch from Jeff Johnston <jjohnstn@cygnus.com>
-	* libc/stdio/ftell.c (ftell): Avoid using buffer position when the
-	buffer is not in a useful state.
-
-1999-09-01  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_link): Add stub.
-
-Fri Aug 27 23:09:09 1999  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* ftell.c (ftell): Use actual position within buffer for text mode.
-	* findfp.c (std): Initialize ptr->_bf._size.
-
-Wed Aug 18 18:48:02 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/unistd.h: Add nice() declaration.
-
-1999-08-09  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/crt0.S (change_mode): Rename to __change_mode and
-	declare as a thumb function so that the disassembler will see the
-	mode change.
-
-Thu Aug  5 17:37:00 1999  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* libc/reent/reent.tex: Updated list of reentrant functions.
-
-1999-07-09  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/stdlib.h (_findenv{,_r}): Add prototypes.
-	
-Tue Jul  6 10:46:24 1999  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* libc/stdio/sprintf.c: Moved snprintf and _snprintf_r to
-	separate file.
-	* libc/stdio/snprintf.c: New file.
-	* libc/stdio/vsprintf.c: Moved vsnprintf and _vsnprintf_r to
-	separate file.
-	* libc/stdio/vsnprintf.c: New file.
-	* libc/stdio/Makefile.am: Added snprintf.c and vsnprintf.c.
-	* libc/stdio/Makefile.in: Regenerated.
-
-Mon Jul  5 14:43:24 1999  Christopher Faylor <cgf@cygnus.com>
-
-	Patch submitted by Egor Duda <deo@logos-m.ru>:
-	* libc/include/stdio.h: Add declarations for *nprintf.
-	* libc/stdio/sprintf.c (snprintf): New function.
-	(_snprintf_r): New function.
-	* libc/stdio/vsprintf.c (vsnprintf): New function.
-	(_vnsprintf_r): New function.
-
-Wed Jun 30 16:36:27 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/Makefile.am (stmp-targetdep): Remove extraneous blank.
-	* libm/Makefile.am (stmp-targetdep): Ditto.
-	* libc/Makefile.in: Regenerated.
-	* libm/Makefile.in: Ditto.
-
-Fri Jun 25 10:49:27 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/Makefile.am (stmp-targetdep): Ignore "." in SUBDIRS.
-	* libm/Makefile.am (stmp-targetdep): Ditto.
-	* libc/Makefile.in: Regenerated.
-	* libm/Makefile.in: Ditto.
-
-Thu June 03 16:25:00 1999  Jeff Johnston <jjohnstn@cygnus.com>
-
-	* Makefile.am: Removed dependencies on all-recursive and added "."
-	to the SUBDIRS list to prevent infinite recursion from occurring.
-	Also removed any references to EXTRA_DATA.
-	* libc/Makefile.am: Ditto.
-	* libc/machine/Makefile.am: Ditto.
-	* libc/machine/i386/Makefile.am: Ditto.
-	* libm/Makefile.am: Ditto.
-	* libc/sys/Makefile.am: Ditto.
-	* Makefile.in: Regenerated.
-	* aclocal.m4: Ditto.
-	* configure: Ditto.
-	* doc/Makefile.in: Ditto.
-	* doc/aclocal.m4: Ditto.
-	* doc/configure: Ditto.
-	* libc/Makefile.in: Ditto.
-	* libc/aclocal.m4: Ditto.
-	* libc/configure: Ditto.
-	* libc/machine/Makefile.in: Ditto.
-	* libc/machine/aclocal.m4: Ditto.
-	* libc/machine/configure: Ditto.
-	* libc/machine/mn10300/Makefile.in: Ditto.
-	* libc/machine/mn10300/aclocal.m4: Ditto.
-	* libc/machine/mn10300/configure: Ditto.
-	* libc/sys/Makefile.in: Ditto.
-	* libc/sys/aclocal.m4: Ditto.
-	* libc/sys/configure: Ditto.
-	* libm/Makefile.in: Ditto.
-	* libm/aclocal.m4: Ditto.
-	* libm/configure: Ditto.
-
-Thu June 03 16:20:00 1999  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* libc/include/stdlib/stdlib.tex: Add link to env_lock.
-
-Fri May 28 17:09:00 1999  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* libc/include/stdlib.h: Add reentrant routines.
-	* libc/stdlib/Makefile.am: Add reentrant routines.
-	* libc/stdlib/Makefile.in: Ditto.
-	* libc/stdlib/envlock.c: New file.
-	* libc/stdlib/envlock.h: New file.
-	* libc/stdlib/getenv.c: Modify to call reentrant routine.
-	* libc/stdlib/getenv_r.c: New file.
-	* libc/stdlib/mblen.c: Modify to call reentrant routine.
-	* libc/stdlib/mblen_r.c: New file.
-	* libc/stdlib/setenv.c: Modify to call reentrant routine.
-	* libc/stdlib/setenv_r.c: New file.
-	* libc/stdlib/stdlib.tex: Add reentrant routines.
-
-Mon May 17 22:01:38 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/types.h: Define __MS_types__ whenever
-	cygwin or win32.
-
-Sun May 16 16:02:41 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Always default to little
-	endian if Windows, regardless of architecture.
-	* libc/include/machine/sethmp.h: Define JBLEN if CYGWIN
-	regardless of architecture.
-
-Mon May  3 11:49:18 1999  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Accept CYGWIN define, even if
-	_WIN32 isn't defined.
-
-Mon May  3 11:41:51 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libm/common/s_rint.c (rint): Add volatile qualifier for
-	intermediate value w.
-	* libm/common/sf_rint.c (rintf): Ditto.
-
-Thu Apr 29 20:34:27 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (remap_handle): Added check to
-	ensure that std streams are initialized before being referenced.
-
-1999-04-27  Jason Molenda  (jsm@bugshack.cygnus.com)
-
-	* README: Update reference to newlib@cygnus.com new
-	newlib@sourceware.cygnus.com address.
-
-Mon Apr 26 18:17:33 1999  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/types.h: Define MS_types if CYGWIN is defined.
-	* libc/include/sys/fcntl.h: Define _O_BINARY et al if CYGWIN is
-	defined, even if _WIN32 isn't defined.
-
-Sat Apr 24 19:59:55 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/fcntl.h: Correct _O_CREATE to _O_CREAT.
-
-Wed Apr 21 18:01:00 1999  Ranjith Kumaran  <ranjith@cygnus.com>
-
-	* libc/include/sys/reent.h: Change Long and ULong to __Long and
-	__ULong.
-	* libc/stdlib/dtoa.c: Ditto.
-	* libc/stdlib/mprec.c: Ditto.
-	* libc/stdlib/mprec.h: Ditto.
-	* libc/stdlib/strtod.c: Ditto.
-
-1999-04-21  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.host (mcore): Remove mcore machine directory.
-
-1999-04-18  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Add support for mcore target.
-	* libc/include/machine/setjmp.h: Add support for mcore target.
-	* configure.host: Add support for mcore target.
-
-1999-04-13  Mark Salter  <msalter@cygnus.com>
-
-	* libc/sys/arm/libcfunc.c: Moved isatty to syscall.c
-	* libc/sys/arm/syscalls.c: Added isatty.
-
-Wed Apr 07 16:06:04 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdlib/ecvtbuf.c (fcvtbuf): Fixed code to properly
-	insert zeroes after significant digits.
-
-Wed Mar 17 22:06:04 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-	
-	* libc/stdio/vfprintf.c (cvt): Changed floating point
-	cvt routine to use union used by dtoa to properly determine
-	if the sign bit is on or not.
-	* libc/stdio/vfieeefp.h: New file
-	
-Wed Mar 17 17:35:04 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* aclocal.m4: Regenerated.
-	* configure: Regenerated.
-
-Wed Mar 17 16:35:04 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/i386/Makefile.am (lib_a_SOURCES): Added missing
-	f_tanf reference.
-	* libc/machine/i386/Makefile.in: Regenerated.
-
-Tue Mar 16 14:56:36 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* acinclude.m4: Changed to work with new automake.
-	* configure: Regenerated.
-	* libc/machine/i386/aclocal.m4: Regenerated.
-	* libc/machine/i386/configure: Regenerated.
-
-Tue Mar 16 13:55:36 1999  Corinna Vinschen  <corinna.vinschen@cityweb.de>
-
-	* libc/sys/cygwin/sys/dirent.h: Add additional prototypes
-	for telldir() and seekdir().  Rename unused structure element
-	for use with these two routines.
-
-Fri Mar 12 19:11:58 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/time/mktime.c (validate_structure): Multiple fixes to
-	code to handle cases where input fields are outside valid ranges.
-	* libc/stdlib/div.c (div): Modified invalid rounding check.
-	* libc/stdlib/ldiv.c (ldiv): Ditto.
-
-Thu Mar 11 21:32:13 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/i386/memcpy.S: Performance rewrite.
-	* libc/machine/i386/memmove.S: Ditto.
-	* libc/machine/i386/i386mach.h: Added more register definitions.
-	* libc/include/math.h: Include <machine/fastmath.h> if -ffast-math
-	option used.
-	* libc/include/machine/fastmath.h: Add definitions for x86
-	fast-math routines.
-
-Wed Mar 10 17:56:00 1999 Ranjith Kumaran  <ranjith@cygnus.com>
-
-	* libc/stdlib/strtod.c: Change from unsigned long to ULong.
-
-Tue Mar  9 14:31:58 1999  Geoffrey Noer  <noer@cygnus.com>
-
-	Adjust newlib headers for new Cygwin Win32 API header files:
-	* libc/include/sys/time.h: Check _WINSOCK_H rather than
-	_GNU_H_WINDOWS32_SOCKETS.
-	* libc/include/sys/types.h: Ditto.
-
-Tue Mar 09 15:55:00 1999 Ranjith Kumaran  <ranjith@cygnus.com>
-
-	*include/sys/reent.h: Add checks for size of Bigint element Long.
-	*libc/dtoa.c: Change routines to use generic Long type.
-	*libc/mprec.c: Change routines to use generic Long type.
-	*libc/mprec.h: Change routines to use generic Long type.
-
-Tue Mar 02 18:07:49 1999 Ranjith Kumaran  <ranjith@cygnus.com>
-
-	* libc/Makefile.am: Add .def files.
-	* libc/Makefile.in: Regenerate.
-	* libc/e_acosh.c: Documentation update.
-	* libc/e_atanh.c: Documentation update.
-	* libc/e_hypot.c: Documentation update.
-	* libc/e_remainder.c: Documentation update.
-	* libc/er_lgamma.c: Documentation update.
-	* libc/mathfp.tex: Documentation update.
-	* libc/s_acos.c: Documentation update.
-	* libc/s_atan.c: Documentation update.
-	* libc/s_atan2.c: Documentation update.
-	* libc/s_cosh.c: Documentation update.
-	* libc/s_fmod.c: Documentation update.
-	* libc/s_isnan.c: Documentation update.
-	* libc/s_log10.c: Documentation update.
-	* libc/s_pow.c: Documentation update.
-	* libc/w_jn.c: Documentation update.
-
-Sun Feb 28 23:18:49 1999  Geoffrey Noer  <noer@cygnus.com>
-
-	* aclocal.m4: Regenerate.
-	* configure: Regenerate.
-
-Tue Feb 23 13:57:26 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-        * libc/machine/mn10300/setjmp.S (_longjmp): Fixed longjmp
-        to return 1 if user specified return code is 0.
-        * libc/machine/mn10200/setjmp.S (_longjmp): Ditto.
-
-Thu Feb 18 11:13:28 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/mn10200/setjmp.S (_setjmp/_longjmp): Fixed setjmp
-	to save the return address.  Fixed longjmp to return to the original
-	calling address of setjmp and to return the user specified return code
-	rather than default to 1.
-	* libc/machine/mn10300/setjmp.S (_setjmp/_longjmp): Ditto.
-
-Mon Feb 15 17:48:17 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdlib/mprec.h (mult): Define mult to be _multiply instead of _mult.
-
-1999-02-10  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (initialise_monitor_handles): Make block
-	volatile so that its assignments will not be discarded.
-
-Wed Feb 10 17:19:40 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/include/_ansi.h: Corrected _STRICT_ANSI reference to
-	be __STRICT_ANSI__ which is generated by compiler.
-	* libc/include/ctype.h: Ditto.
-	* libc/include/math.h: Ditto.
-	* libc/include/stdio.h: Ditto.
-	* libc/include/stdlib.h: Ditto.
-	* libc/include/string.h: Ditto.
-	* libc/include/sys/signal.h: Ditto.
-
-1999-02-08  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.host: Add support for StrongARM target.
-
-Fri Feb  5 11:13:14 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/string/strncpy.c (strncpy): Removed redundant code
-	that was copying bytes if data unaligned.
-
-1999-02-02  Brendan Kehoe  <brendan@cygnus.com>
-
-	* libc/stdlib/Makefile.{am,in} (CHEWOUT_FILES): Add mblen.def,
-	mbstowcs.def, and wcstombs.def.
-
-Sat Jan 30 02:36:33 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/errno.h: Add Cygwin errno.
-	* libc/stdio/flags.c: Don't default to O_TEXT if no other flag
-	is specified.
-
-1999-01-29  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c: Move C library functions into seperate
-	file.
-	
-	* libc/sys/arm/libcfunc.c: New file containing C library functions
-	from syscalls.c
-
-	* libc/sys/arm/Makefile.am (lib_a_SOURCES): Add libcfuncs.c
-	* libc/sys/arm/Makefile.in (lib_a_SOURCES): Regenerate.
-
-
-1999-01-27  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/machine/setjmp.h (D30V _JBLEN/_JBTYPE): Use double
-	type, and cut size in half so that the jmp_buf array is guaranteed
-	to be aligned on a 64-bit boundary.
-
-Mon Jan 25 12:05:38 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/string/strings.tex: Added information about
-	strcasecmp and strncasecmp.
-	* libc/stdlib/stdlib.tex: Added missing information
-	about mblen, mbstowcs, and wcstombs.
-	* libc/string/strchr.c: Changed how mask is built to use
-	shift operators so register will be used instead of storage.
-
-1999-01-22  DJ Delorie  <dj@cygnus.com>
-
-	* libc/include/stdlib.h: don't use dllimport if we're building
-	newlib, since it's inside cygwin.dll
-
-Fri Jan 22 14:57:18 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/ctype/ctype_.c: Need to use __declspec(dllexport) for
-	_ctype_ under cygwin.
-
-Fri Jan 22 09:50:19 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* include/stdlib.h: Fix typo from previous checkin.
-
-Thu Jan 21 22:42:21 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* include/ctype.h: Use __declspec(dllimport) method for exporting
-	variable from cygwin DLL.
-	* include/time.h: Ditto.
-	* sys/errno.h: Ditto.
-	* include/stdlib.h: Export __mb_cur_max from cygwin DLL.
-	* libc/locale/locale.c: Use __declspec(dllexport) method for
-	exporting variable from cygwin DLL.
-
-Sat Jan 16 13:29:54 1999  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/stdio/setvbuf.c: Always clean up when _IONBF or possible
-	access of bogus pointer will result in SIGSEGV.
-
-1999-01-07  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/setjmp.S: Use C macros to cope with the possibility
-	of an underscore prefix to function names.
-
-Fri Jan  8 19:00:07 1999  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/i386/i386mach.h (__REG_PREFIX__): Create new
-	define __REG_PREFIX__ instead of using __REGISTER_PREFIX__.
-
-1998-12-31  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/machine/i386/i386mach.h (__REGISTER_PREFIX__): Only define
-	to `%' if not already defined.
-
-1998-12-30  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/stdio/tmpnam.c (_tempnam_r): Make directory and prefix
-	arguments const char *, not char *.
-	* libc/include/stdio.h (_tempnam_r): Ditto.
-
-	* libc/include/sys/reent.h (struct _reent): The _sig_func type
-	points to a function taking an integer, not void.
-
-Tue Dec 29 14:35:53 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* configure.host: Add a define for Cygwin builds.
-	* libc/include/ctype.h: Don't use dll imported variables in newlib.
-
-Mon Dec 28 09:19:56 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/ctype.h: Define _ctype_ as dll imported variable
-	for use with Cygwin.
-	* libc/include/sys/errno.h: Define _sys_errlist and _sys_nerr as
-	dll imported variables for use with Cygwin.
-	* libc/ctype/ctype_.c: Undefine _ctype_ in case it has been defined
-	as a dll imported variable for Cygwin.
-
-Sat Dec 26 00:13:53 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/unistd.h: Add proto for getpass.
-
-Fri Dec 18 19:28:19 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin/sys/dirent.h: add protos for scandir and
-	alphasort.
-
-Fri Dec 18 16:33:25 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/posix/execvp.c (execvp): call cygwin_posix_path_list_p,
-	not posix_path_list_p.
-
-1998-12-15  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/string/memchr.c: Treat 'c' argument as an unsigned byte not
-	a signed int.
-
-1998-12-13  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/include/machine/setjmp.h (_JBLEN): Set to 10.
-
-1998-12-12  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/machine/fr30/setjmp.S: New file, supplied by Mark Slater
-	<msalter@cygnus.com>
-	* libc/machine/fr30/Makefile.am: Add build of setjmp.S
-	* libc/machine/fr30/Makefile.in: Regenerated.
-
-1998-12-11  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.host: Remove use of libc/sys for FR30 port.
-	* libc/sys/fr30: Remove directory (replaced by libgloss).
-
-1998-12-10  Ken Raeburn  <raeburn@cygnus.com>
-
-	* libc/string/strcat.c (ALIGNED): Sense of result was reversed.
-	* libc/string/strncat.c (ALIGNED): Ditto.
-
-Wed Dec  9 14:37:57 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/time.h: include sys/types.h
-
-Tue Dec  8 15:53:18 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/i386/memcmp.S (memcmp): Fix for unequal
-	comparison found when checking word at a time.
-
-1998-12-04  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/fr30/crt0.s (_start): Initialise frame pointer.
-
-1998-12-03  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/fr30/syscalls.c (_times): New function stub.
-
-Thu Dec  3 15:59:19 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* configure.host (mach_add_setjmp): Replaced mach_add_objs
-	with mach_add_setjmp flag which indicates if setjmp should
-	be added to the machine directory objects.
-	* acinclude.m4: Removed reference to mach_add_objs.
-	* aclocal.m4: Regenerated.
-	* Makefile.in: Regenerated.
-	* configure: Regenerated.
-	* libc/aclocal.m4: Regenerated.
-	* libc/Makefile.in: Regenerated.
-	* libc/configure: Regenerated.
-	* libc/machine/aclocal.m4: Regenerated.
-	* libc/machine/Makefile.in: Regenerated.
-	* libc/machine/configure: Regenerated.
-	* libc/machine/i386/aclocal.m4: Regenerated.
-	* libc/machine/i386/Makefile.am: Altered to selectively add
-	setjmp.S to the src files list.
-	* libc/machine/i386/Makefile.in: Regenerated.
-	* libc/machine/i386/configure.in: Altered to test mach_add_setjmp.
-	* libc/machine/i386/configure: Regenerated.
-
-1998-12-02  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/fr30/crt0.s (_start): Fix function names.
-
-	* libc/machine/fr30: New directory
-	* libc/machine/fr30/Makefile.am: New file.
-	* libc/machine/fr30/Makefile.in: New generated file.
-	* libc/machine/fr30/configure.in: New file.
-	* libc/machine/fr30/configure: New generated file.
-	* libc/machine/fr30/aclocal.m4: New generated file.
-	* libc/sys/fr30/Makefile.am: New file.
-	* libc/sys/fr30/Makefile.in: New generated file.
-	* libc/sys/fr30/configure.in: New file.
-	* libc/sys/fr30/configure: New generated file.
-	* libc/sys/fr30/syscalls.c: New file.
-
-Tue Dec  1 16:28:56 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin/sys/utmp.h: new file, moved from winsup/include.
-
-1998-12-01  Ken Raeburn  <raeburn@cygnus.com>
-
-	* libc/time/strftime.c (strftime): Also handle %y for years before
-	1900.
-
-Tue Dec  1 13:26:07 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/string/strcasecmp.c (strcasecmp): Adhere to standard
-	UNIX convention.  Perform tolower on characters before comparing
-	them rather than use toupper.
-	* libc/string/strncasecmp.c (strncasecmp): Ditto.
-
-Mon Nov 30 16:24:19 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-	
-	* configure.host: Added using i386 machine directory
-	for all x86 cross-compiler and configuring
-	which added object files to use via new "mach_add_objs" variable.
-	* configure: Regenerated.
-	* libc/configure: Regenerated.
-	* libc/Makefile.in: Regenerated.
-	* libc/aclocal.m4: Regenerated.
-	* libc/ctype/Makefile.in: Regenerated.
-	* libc/errno/Makefile.in: Regenerated.
-	* libc/locale/Makefile.in: Regenerated.
-	* libc/machine/Makefile.in: Regenerated.
-	* libc/machine/aclocal.m4: Regenerated.
-	* libc/machine/configure: Regenerated.
-	* libc/posix/Makefile.in: Regenerated.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/signal/Makefile.in: Regenerated.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/stdlib/Makefile.in: Regenerated.
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/memmove.c: Optimized code to use memcpy
-	logic when performing a non-destructive copy.
-	* libc/string/strncmp.c: Altered code to allow building
-	optimized for size or speed.
-	* libc/syscalls/Makefile.in: Regenerated.
-	* libc/time/Makefile.in: Regenerated.
-	* libc/unix/Makefile.in: Regenerated.
-	* libc/machine/i386/Makefile.am: Added new files and reference
-	to "mach_add_objs" to indicate optional object files.
-	* libc/machine/i386/Makefile.in: Regenerated.
-	* libc/machine/i386/aclocal.m4: Regenerated.
-	* libc/machine/i386/configure: Regenerated.
-	* libc/machine/i386/memchr.S: New file that implements
-	function in Intel assembler.
-	* libc/machine/i386/memcmp.S: ditto.
-	* libc/machine/i386/memcpy.S: ditto.
-	* libc/machine/i386/memmove.S: ditto.
-	* libc/machine/i386/memset.S: ditto.
-	* libc/machine/i386/strchr.S: ditto.
-	* libc/machine/i386/strlen.S: ditto.
-	* libc/machine/i386/f_atan2.S: New file that implements
-	fast version of math function to be used by compiler when
-	--ffast_math compile option is used.
-	* libc/machine/i386/f_atan2f.S: ditto.
-	* libc/machine/i386/f_exp.c: ditto.
-	* libc/machine/i386/f_expf.c: ditto.
-	* libc/machine/i386/f_frexp.S: ditto.
-	* libc/machine/i386/f_frexpf.S: ditto.
-	* libc/machine/i386/f_ldexp.S: ditto.
-	* libc/machine/i386/f_ldexpf.S: ditto.
-	* libc/machine/i386/f_log.S: ditto.
-	* libc/machine/i386/f_logf.S: ditto.
-	* libc/machine/i386/f_log10.S: ditto.
-	* libc/machine/i386/f_log10f.S: ditto.
-	* libc/machine/i386/f_math.h: New file.
-	* libc/machine/i386/f_pow.c: ditto.
-	* libc/machine/i386/f_powf.S: ditto.
-	* libc/machine/i386/f_tan.S: ditto.
-	* libc/machine/i386/f_tan.S: ditto.
-	* libc/machine/i386/i386mach.h: New file.
-
-Mon Nov 30 13:02:17 1998  Christopher Faylor <cgf@cygnus.com>
-
-	patch from Mumit Khan <khan@xraylith.wisc.edu>
-	* libc/include/stdio.h (tempnam): Add prototype.
-	* libc/stdio/tmpnam.c (_tempnam_r): Handle NULL prefix.
-	(tempnam): Adhere to prototype.
-
-Thu Nov 26 00:21:32 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* Makefile.am: Add default for AR_FLAGS.
-	* Makefile.in: Regenerate.
-
-Tue Nov 24 18:48:56 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/time.h: move __cplusplus wrapper after includes
-	* libc/include/sys/time.h: ditto.  If Cygwin, include
-	sys/select.h.
-	* libc/include/sys/types.h: lose "32" in comment about Cygwin.
-
-1998-11-23  Ken Raeburn  <raeburn@cygnus.com>
-
-	* libc/time/strftime.c (strftime): Handle %y after year 2000.
-
-Wed Nov 18 12:22:41 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/fr30/crt0.s (_start): Switch over to using int #9 as
-	abnormnal end-of-crt0 marker.
-
-Tue Nov 17 16:27:58 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/fr30/crt0.s: New file/directory.
-	* libc/include/machine/setjmp.h: Add FR30 target.
-	* libc/include/machine/ieeefp.h: Add FR30 target.
-	* configure.host: Add FR30 target.
-
-Mon Nov  16 23:15:00 1998  Ranjith Kumaran <ranjith@cygnus.com>
-
-        * libm/math: Files that are duplicated in common directory removed.
-        * libm/math/fdlibm.h: Removed.
-        * libm/math/s_cbrt.c: Removed.
-        * libm/math/s_copysign.c: Removed.
-        * libm/math/s_expm1.c: Removed.
-        * libm/math/s_finite.c: Removed.
-        * libm/math/s_ilogb.c: Removed.
-        * libm/math/s_infinity.c: Removed.
-        * libm/math/s_lib_ver.c: Removed.
-        * libm/math/s_log1p.c: Removed.
-        * libm/math/s_logb.c: Removed.
-        * libm/math/s_matherr.c: Removed.
-        * libm/math/s_modf.c: Removed.
-        * libm/math/s_nan.c: Removed.
-        * libm/math/s_nextafter.c: Removed.
-        * libm/math/s_rint.c: Removed.
-        * libm/math/s_scalbn.c: Removed.
-        * libm/math/sf_cbrt.c: Removed.
-        * libm/math/sf_copysign.c: Removed.
-        * libm/math/sf_expm1.c: Removed.
-        * libm/math/sf_finite.c: Removed.
-        * libm/math/sf_ilogb.c: Removed.
-        * libm/math/sf_infinity.c: Removed.
-        * libm/math/sf_log1p.c: Removed.
-        * libm/math/sf_logb.c: Removed.
-        * libm/math/sf_modf.c: Removed.
-        * libm/math/sf_nan.c: Removed.
-        * libm/math/sf_nextafter.c: Removed.
-        * libm/math/sf_rint.c: Removed.
-        * libm/math/sf_scalbn.c: Removed.
-        * libm/math/Makefile.am: Removed references to deleted files (above).
-        * libm/math/Makefile.in: Regenerated.
-        * libm/Makefile.am: Added common directory to math.
-        * libm/Makefile.in: Regenerated.
-
-Mon Nov  2 23:12:00 1998  Ranjith Kumaran <ranjith@cygnus.com>
-
-        * libm/mathfp: Add non-ANSI functions.
-        * libm/mathfp/e_acosh.c acosh(): New file.
-        * libm/mathfp/e_atanh.c atanh(): New file.
-        * libm/mathfp/e_hypot.c hypot(): New file.
-        * libm/mathfp/e_j0.c j0(): New file.
-        * libm/mathfp/e_j1.c j1(): New file.
-        * libm/mathfp/e_remainder.c remainder(): New file.
-        * libm/mathfp/e_scalb.c scalb(): New file.
-        * libm/mathfp/ef_acosh.c acoshf(): New file.
-        * libm/mathfp/ef_atanh.c atanhf(): New file.
-        * libm/mathfp/ef_hypot.c hypotf(): New file.
-        * libm/mathfp/ef_j0.c j0f(): New file.
-        * libm/mathfp/ef_j1.c j1f(): New file.
-        * libm/mathfp/ef_remainder.c remainderf(): New file.
-        * libm/mathfp/ef_scalb.c scalbf(): New file.
-        * libm/mathfp/er_gamma.c gamma_r: New file.
-        * libm/mathfp/er_lgamma.c lgamma_r(): New file.
-        * libm/mathfp/erf_gamma.c gamma_rf(): New file.
-        * libm/mathfp/erf_lgamma.c lgamma_rf(): New file.
-        * libm/mathfp/w_cabs.c cabs(): New file.
-        * libm/mathfp/w_drem.c drem(): New file.
-        * libm/mathfp/w_jn.c jn(): New file.
-        * libm/mathfp/wf_cabs.c cabsf(): New file.
-        * libm/mathfp/wf_drem.c dremf(): New file.
-        * libm/mathfp/wf_jn.c jnf(): New file.
-
-Mon Nov  2 16:43:18 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin32: remove directory and contents
-	* libc/sys/cygwin: and add back, losing the "32".
-	* configure.host: check for cygwin* instead of cygwin32.
-	* acinclude.m4: ditto.
-	* aclocal.m4: regenerate with aclocal
-	* configure: regenerate with autoconf
-
-Tue Oct 20 17:28:28 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdio/tmpnam.c (_tempnam_r): not enough memory allocated
-	for length
-
-Tue Oct 20 18:49:05 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/include/sys/reent.h (struct _reent): Added variables _rand_next, _strtok_last,
-	_asctime_buf, _localtime_buf and _gamma_signgam to struct reent
-	to make rand/srand, strtok, asctime, localtime, w_gamma,
-	w_lgamma, wf_gamma, and wf_lgamma reentrant.  Included
-	time.h to bring in struct tm definition.
-	* libc/stdlib/rand.c (rand, srand): Don't emit functions 'rand' and 'srand' if
-	'_REENT_ONLY' is set. Used variable '_rand_next' from struct reent.
-	* libc/stdlib/strtok.c (strtok): Used variable '_strtok_last' from struct reent
-	instead of static variable.
-	* libc/stdlib/asctime.c (asctime): Used variable '_asctime_buf' from
-	struct reent instead of static variable.
-	* libc/stdlib/lcltime.c (localtime): Used variable '_localtime_buf' from
-	struct reent instead of static variable.
-	* libm/math/Makefile.am: Removed s_signgam.o.
-	* libm/math/Makefile.in: Regenerated.
-	* libm/math/w_gamma.c (gamma): Used variable '_gamma_signgam' from
-	struct reent instead of global variable 'signgam'.
-	* libm/math/w_lgamma.c (lgamma): Likewise.
-	* libm/math/wf_gamma.c (gammaf): Likewise.
-	* libm/math/wf_lgamma.c (lgammaf): Likewise.
-	* libm/math/s_signgam.c: Removed.
-	* libc/include/unctrl.h: Defined arrays __unctrl and __unctrllen
-	to be const.
-	* libc/misc/unctrl.c: Defined arrays __unctrl and __unctrllen
-	to be const.
-	* libc/reent/Makefile.am: Added dependence for impure.o on impure.c and
-	libc/include/reent.h.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/stdio/vfprintf.c (_vfprintf_r): Defined arrays 'blanks' and 'zeroes'
-	to be const.
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): Defined arrays 'JIS_state_table' and
-	'JIS_action_table' to be const.
-	* libm/math/s_lib_ver.c: define variable _LIB_VERSION to be const.
-
-Mon Oct 12 00:26:33 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* acinclude.m4:  $with_target_subdir should default to '.'
-	or confusion results when configuring in same directory as sources.
-	* Regenerate all aclocal.m4 and configure files.
-
-Fri Oct  9 16:27:36 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdlib/mallocr.c: Added 16 byte alignment support which
-	can be set by defining MALLOC_ALIGNMENT=16.  Also added support
-	for platforms where sizeof(size_t) < sizeof(long) via
-	SIZE_T_SMALLER_THAN_LONG macro.
-	
-Wed Oct  7 14:02:40 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/include/time.h (CLOCKS_PER_SEC): Change CLOCKS_PER_SEC
-	to refer to _CLOCKS_PER_SEC_ and added including <machine/time.h>
-	which sets _CLOCKS_PER_SEC_ for selected machines.
-	* libc/include/machine/time.h: New file.
-
-Tue Oct  6 16:08:05 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/syscalls/sysexecve.c: New file.
-	* libc/syscalls/sysgettod.c: New file.
-	* libc/syscalls/systimes.c: New file.
-	* libc/syscalls/Makefile.am: Added new objects.
-	* libc/syscalls/Makefile.in: Regenerated.
-	* libc/include/_syslist.h (_execve): Moved define in file.
-	* libc/include/reent.h:  Added _execve_r declaration.
-	* libc/Makefile.in: Regenerated.
-	* libc/ctype/Makefile.in: Regenerated.
-	* libc/errno/Makefile.in: Regenerated.
-	* libc/locale/Makefile.in: Regenerated.
-	* libc/machine/Makefile.in: Regenerated.
-	* libc/misc/Makefile.in: Regenerated.
-	* libc/posix/Makefile.in: Regenerated.
-	* libc/reent/Makefile.in: Regenerated.
-	* libc/reent/execr.c (_execve_r): Added _execve_r function.
-	* libc/signal/Makefile.in: Regenerated.
-	* libc/stdio/Makefile.in: Regenerated.
-	* libc/time/Makefile.in: Regenerated.
-	* libc/unix/Makefile.in: Regenerated.
-	* libm/mathfp/Makefile.in: Regenerated.
-
-Tue Oct  6 14:14:05 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/string/Makefile.in: Regenerated.
-	* libc/string/memchr.c (memchr): Moved code to reduce object size.
-	* libc/string/memcpy.c (memcpy): Ditto.
-	* libc/string/memcmp.c (memcmp): Ditto.
-	* libc/string/memset.c (memset): Ditto.
-	* libc/string/strchr.c (strchr): Ditto.
-	* libc/string/strcmp.c (strcmp): Ditto.
-	* libc/string/strcpy.c (strcpy): Ditto.
-	* libc/string/strlen.c (strlen): Ditto.
-
-Tue Oct  6 13:58:05 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libm/acinclude.m4: Removed since newlib/acinclude.m4 can be used
-	to generate aclocal.m4.
-	* libm/Makefile.in: Regenerated.
-	* libm/aclocal.m4: Regenerated.
-	* libm/configure: Regenerated.
-	* libm/math/Makefile.in: Regenerated.
-	* libm/mathfp/Makefile.in: Regenerated.
-
-1998-09-25  Mark Salter  <msalter@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Fixed test for mn10300 and mn10200
-	by adding leading and trailing underscores to symbol names.
-
-Tue Sep 22 15:33:41 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* Makefile.in: Add default for AR_FLAGS.
-
-Tue Sep 22 15:02:49 1998  Christopher Faylor <cgf@cygnus.com>
-
-	patch from ian@airs.com (Ian Taylor):
-	* acinclude.m4: Run AC_CANONICAL_BUILD explicitly before
-	NEWLIB_CONFIGURE so AC_CANONICAL_HOST will be run before it
-	is needed for detecting the build machine.  Required for
-	cygwin native builds.
-
-	* Regenerate all aclocal.m4 and configure files.
-
-Mon Sep 21 14:44:16 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/crt0.S: Prepend a period to all local labels that
-	used to start with LC.
-
-Thu Sep 17 18:18:11 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/setjmp.S (setjmp): Handle __SH4* like __SH3E__ .
-	(longjmp): Likewise.
-
-Thu Sep 17 16:25:33 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/memset.S (memset): Move copy from r4 to r4 before
-	the test for small number of bytes.
-
-Thu Sep 10 11:40:00 1998  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* Makefile.am: Add --enable-newlib-hw-fp check.  This builds the new
-	math library that uses floating point algorithms instead of the old
-	libm.
-	* Makefile.in: Regenerate with automake version 1.3b.
-	* configure: Rebuild.
-	* libm/Makefile.in: Regenerate with automake version 1.3b.
-	* libm/aclocal.m4: Regenerate.
-	* libm/configure: Rebuild.
-	* libm/configure.in: Add newlib_hw_fp definition and mathfp directory.
-	* libm/acinclude.m4: Define macros for configure.in.
-	* libm/config.h.in: Generate.
-	* libm/mathfp/Makefile.am: New file.
-	* libm/mathfp/Makefile.in: Generate.
-	* libm/mathfp/s_acos.c (acos): New file.
-	* libm/mathfp/s_asin.c (asin): New file.
-	* libm/mathfp/s_asine.c (asine): New file.
-	* libm/mathfp/s_atan.c (atan): New file.
-	* libm/mathfp/s_atan2.c (atan2): New file.
-	* libm/mathfp/s_atangent.c (atangent): New file.
-	* libm/mathfp/s_ceil.c (ceil): New file.
-	* libm/mathfp/s_copysign.c (copysign): New file.
-	* libm/mathfp/s_cos.c (cos): New file.
-	* libm/mathfp/s_cosh.c (cosh): New file.
-	* libm/mathfp/s_exp.c (exp): New file.
-	* libm/mathfp/s_fabs.c (fabs): New file.
-	* libm/mathfp/s_finite.c (finite): New file.
-	* libm/mathfp/s_floor.c (floor): New file.
-	* libm/mathfp/s_fmod.c (fmod): New file.
-	* libm/mathfp/s_frexp.c (frexp): New file.
-	* libm/mathfp/s_infconst.c: New file.
-	* libm/mathfp/s_isinf (isinf).c: New file.
-	* libm/mathfp/s_isnan.c (isnan): New file.
-	* libm/mathfp/s_ispos.c (ispos): New file.
-	* libm/mathfp/s_ldexp.c (ldexp): New file.
-	* libm/mathfp/s_log.c (log): New file.
-	* libm/mathfp/s_log10.c (log10): New file.
-	* libm/mathfp/s_logarithm.c (logarithm): New file.
-	* libm/mathfp/s_mathcnst.c: New file.
-	* libm/mathfp/s_modf (modf).c: New file.
-	* libm/mathfp/s_numtest.c (numtest): New file.
-	* libm/mathfp/s_pow.c (pow): New file.
-	* libm/mathfp/s_scalbn.c (scalbn): New file.
-	* libm/mathfp/s_sin (sin).c: New file.
-	* libm/mathfp/s_sine.c (sine): New file.
-	* libm/mathfp/s_sineh.c (sineh): New file.
-	* libm/mathfp/s_sinf.c (sinf): New file.
-	* libm/mathfp/s_sinh.c (sinh): New file.
-	* libm/mathfp/s_sqrt.c (sqrt): New file.
-	* libm/mathfp/s_tan.c (tan): New file.
-	* libm/mathfp/s_tanh.c (tanh): New file.
-	* libm/mathfp/sf_acos.c (acosf): New file.
-	* libm/mathfp/sf_asin.c (asinf): New file.
-	* libm/mathfp/sf_asine.c (asinef): New file.
-	* libm/mathfp/sf_atan.c (atanf): New file.
-	* libm/mathfp/sf_atan2.c (atan2f): New file.
-	* libm/mathfp/sf_atangent.c (atangent): New file.
-	* libm/mathfp/sf_ceil.c (ceilf): New file.
-	* libm/mathfp/sf_copysign.c (copysignf): New file.
-	* libm/mathfp/sf_cos.c (cosf): New file.
-	* libm/mathfp/sf_cosh.c (coshf): New file.
-	* libm/mathfp/sf_exp.c (expf): New file.
-	* libm/mathfp/sf_fabs.c (fabsf): New file.
-	* libm/mathfp/sf_finite.c (finitef): New file.
-	* libm/mathfp/sf_floor.c (floorf): New file.
-	* libm/mathfp/sf_fmod.c (fmodf): New file.
-	* libm/mathfp/sf_frexp.c (frexpf): New file.
-	* libm/mathfp/sf_isinf.c (isinff): New file.
-	* libm/mathfp/sf_isnan.c (isnanf): New file.
-	* libm/mathfp/sf_ispos.c (isposf): New file.
-	* libm/mathfp/sf_ldexp.c (ldexpf): New file.
-	* libm/mathfp/sf_log.c (logf): New file.
-	* libm/mathfp/sf_log10.c (log10f): New file.
-	* libm/mathfp/sf_logarithm.c (logarithmf): New file.
-	* libm/mathfp/sf_modf.c (modff): New file.
-	* libm/mathfp/sf_numtest.c (numtestf): New file.
-	* libm/mathfp/sf_pow.c (powf): New file.
-	* libm/mathfp/sf_scalbn.c (scalbnf): New file.
-	* libm/mathfp/sf_sin.c (sinf): New file.
-	* libm/mathfp/sf_sine.c (sinef): New file.
-	* libm/mathfp/sf_sineh.c (sinehf): New file.
-	* libm/mathfp/sf_sinh.c (sinhf): New file.
-	* libm/mathfp/sf_sqrt.c (sqrtf): New file.
-	* libm/mathfp/sf_tan.c (tanf): New file.
-	* libm/mathfp/sf_tanh.c (tanhf): New file.
-	* libm/mathfp/zmath.h: New file.
-
-Wed Sep  2 02:49:03 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/strcmp.S (L_char_loop): Re-load r0 at loop
-	exit if it has been overwritten by pre-fetching in delay slot.
-
-1998-09-01  Michael Meissner  <meissner@cygnus.com>
-
-	* Makefile.am (tooldir): Add in host_alias, so that multilib
-	libraries are installed in the directory the compiler looks in.
-	* Makefile.in: Regenerate.
-
-	* libc/stdlib/Makefile.in: Regenerate with automake version 1.3b.
-
-Mon Aug 31 11:39:31 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/mn10300/memcpy.S (_memcpy): Move alignment test
-	ahead of test for number of bytes being moved.
-
-Thu Aug 27 14:07:53 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/unistd.h: Nothing special needed for
-	_exit under cygwin.
-
-Wed Aug 26 15:05:21 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_sbrk): Rename '_end' to 'end' to
-	conform to user label naming conventions. 
-
-Mon Aug 24 14:46:19 1998  Geoffrey Noer <noer@cygnus.com>
-
-	* libc/sys/cygwin32/sys/utime.h: variable names in
-	protos should start with two leading underscores
-	* libc/include/string.h: ditto
-	* libc/include/sys/signal.h: ditto
-	* libc/include/sys/stat.h: ditto
-	* libc/include/sys/time.h: ditto
-	* libc/include/sys/unistd.h: ditto
-	* libc/include/ctype.h: ditto
-	* libc/include/stdlib.h: ditto
-	* libc/include/sys/reent.h: struct _atexit function ptr takes a
-	void, same with _sig_func.
-
-Fri Aug 21 14:44:14 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): Added preprocessor checks
-	for MB_CAPABLE to reduce code size when newlib is not configured
-	with --enable-newlib-mb.
-	* libc/stdlib/Makefile.am: Specified -fshort-enums when building
- 	mbtowc_r.o to minimize size.
-	* libc/stdlib/Makefile.in: Rebuild.
-	
-Wed Aug 19 16:20:13 1998  Jim Wilson  <wilson@cygnus.com>
-
-	* libc/sys/sparc64/Makefile.am (.S_r.o, .c_r.o): Change -DREENTRANT
-	to -DREENT.
-	* libc/sys/sparc64/Makefile.in: Rebuild.
-	
-Tue Aug 18 22:38:29 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Makefile.am (MAKEOVERRIDES): Define.
-	* Makefile.in: Rebuild.
-
-Tue Aug 18 12:38:47 1998  Jim Wilson  <wilson@cygnus.com>
-
-	* libc/sys/sparc64/sys/stat.h (stat): Add const.
-
-Mon Aug 17 22:27:06 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* acinclude.m4 (NEWLIB_CONFIGURE): Use top_builddir in
-	newlib_cflags when looking for targ-include.
-	* */aclocal.m4, */configure: Rebuild.
-
-Fri Jul 31 10:57:42 1998  Catherine Moore  <clm@cygnus.com>
-
-        * libc/sys/arm/syscalls.c (_sbrk): Change "__end__"
-        to "_end".
-
-Wed Jul 29 00:02:01 1998  Mark Alexander  <marka@cygnus.com>
-
-	* libc/include/sys/config.h: Define __IEEE_LITTLE_ENDIAN
-	on SPARCs with little-endian data.
-	* libc/include/machine/ieeefp.h: Ditto.
-
-Wed Jul 22 18:00:10 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* acinclude.m4: Handle a relative srcdir correctly when setting
-	newlib_cflags.
-	* */aclocal.m4, */configure: Rebuild.
-
-Wed Jul 22 17:11:33 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libm/math/wrf_lgamma.c (lgammaf_r): Initialize exc.err to 0 and
- 	also set exc.arg1, exc.arg2 appropriately in case matherr is supplied.
-	* libm/math/wrf_gamma.c (gammaf_r): ditto 
-	* libm/math/wr_lgamma.c (lgamma_r): ditto 
-	* libm/math/wr_gamma.c (gamma_r): ditto 
-	* libm/math/wf_sqrt.c (sqrtf): ditto 
-	* libm/math/wf_sinh.c (sinhf): ditto 
-	* libm/math/wf_scalb.c (scalbf): ditto 
-	* libm/math/wf_remainder.c (remainderf): ditto 
-	* libm/math/wf_pow.c (powf): ditto 
-	* libm/math/wf_log10.c (log10f): ditto 
-	* libm/math/wf_log.c (logf): ditto 
-	* libm/math/wf_lgamma.c (lgammaf): ditto 
-	* libm/math/wf_jn.c (jnf, ynf): ditto 
-	* libm/math/wf_j1.c (j1f, y1f): ditto 
-	* libm/math/wf_j0.c (j0f, y0f): ditto 
-	* libm/math/wf_hypot.c (hypotf): ditto 
-	* libm/math/wf_gamma.c (gammaf): ditto 
-	* libm/math/wf_fmod.c (fmodf): ditto 
-	* libm/math/wf_exp.c (expf): ditto 
-	* libm/math/wf_cosh.c (coshf): ditto 
-	* libm/math/wf_atanh.c (atanhf): ditto 
-	* libm/math/wf_atan2f.c (atan2f): ditto 
-	* libm/math/wf_asin.c (asinf): ditto 
-	* libm/math/wf_acosh.c (acoshf): ditto 
-	* libm/math/wf_acos.c (acosf): ditto 
-	* libm/math/w_sqrt.c (sqrt): ditto 
-	* libm/math/w_sinh.c (sinh): ditto 
-	* libm/math/w_scalb.c (scalb): ditto 
-	* libm/math/w_remainder.c (remainder): ditto 
-	* libm/math/w_pow.c (pow): ditto 
-	* libm/math/w_log10.c (log10): ditto 
-	* libm/math/w_log.c (log): ditto 
-	* libm/math/w_lgamma.c (lgamma): ditto 
-	* libm/math/w_jn.c (jn, yn): ditto 
-	* libm/math/w_j1.c (j1, y1): ditto 
-	* libm/math/w_j0.c (j0, y0): ditto 
-	* libm/math/w_hypot.c (hypot): ditto 
-	* libm/math/w_gamma.c (gamma): ditto 
-	* libm/math/w_fmod.c (fmod): ditto 
-	* libm/math/w_exp.c (exp): ditto 
-	* libm/math/w_cosh.c (cosh): ditto 
-	* libm/math/w_atanh.c (atanh): ditto 
-	* libm/math/w_atan2f.c (atan2): ditto 
-	* libm/math/w_asin.c (asin): ditto 
-	* libm/math/w_acosh.c (acosh): ditto 
-	* libm/math/w_acos.c (acos): ditto 
-
-Tue Jul 21 12:34:54 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libm/math/Makefile.am (src): Add w_cabs.c and w_drem.c.
-	(fsrc): Add wf_cabs.c and wf_drem.c.
-	* libm/math/Makefile.in: Rebuild.
-
-	* Makefile.am (AM_MAKEFLAGS): Add CFLAGS_FOR_BUILD.  Remove some
-	unused directory variables.  Remove duplicate CFLAGS.
-	* Makefile.in: Rebuild.
-
-	* doc/Makefile.am ($(MKDOC)): Don't use $(CFLAGS) when building
-	with $(CC_FOR_BUILD).
-	(makedoc.o): Likewise.
-	* doc/Makefile.in: Rebuild.
-
-	* libc/sys/cygwin32/Makefile.am (EXTRA_LIBRARIES): Define, to
-	force a definition of COMPILE.
-	(libfoo_a_SOURCES): Define.
-	* libc/sys/cygwin32/Makefile.in: Rebuild.
-	* libc/sys/tic80/Makefile.am (EXTRA_LIBRARIES): Define, to
-	force a definition of COMPILE.
-	(libfoo_a_SOURCES): Define.
-	* libc/sys/tic80/Makefile.in: Rebuild.
-
-Mon Jul 20 20:49:24 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/fcntl.h: Add O_NOINHERIT, Win32-specific
-	flag.
-
-Fri Jul 17 16:13:16 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Build using autoconf and automake.  Added many Makefile.am and
-	configure.in files, plus generated files.  Old configure.in files
-	and all old Makefile.in files completely replaced.  Removed
-	host/any.  Added acinclude.m4 and configure.host.
-
-Sat Jul 11 18:14:49 1998  Felix Lee  <flee@cygnus.com>
-
-	* libc/stdio/vfprintf.c: enable long long support, sometimes.
-	* configure.in (*-*-cygwin32): add -DWANT_PRINTF_LONG_LONG.
-
-Tue Jul  7 01:51:55 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/strcmp.S, libc/machine/sh/strcpy.S: New files.
-	* libc/machine/sh/Makefile.in: Add rules for new files.
-
-Tue Jul  7 01:40:55 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/asm.h (SL, DELAYED_BRANCHES): Define.
-	* libc/machine/sh/memset.S (memset): Remove uses of dt; shorten code.
-	* libc/machine/sh/memcpy.S (SL, DELAYED_BRANCHES): Don't define.
-
-Thu Jul  2 10:33:16 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_exit): Add comment, noting that exit
-	code is ignored.
-
-Wed Jun 24 13:56:54 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdio/tmpnam.c (_tmpnam_r): Changed routine to use
-	internal static buffer when s is NULL, as prescribed by ANSI.
-
-1998-06-22  Vladimir N. Makarov  <vmakarov@cygnus.com>
-
-	* libc/sys/h8300hms/Makefile.in (OFILES): malloc.o has been
-	removed.
-	* libc/sys/h8300hms/malloc.c: has been removed.  Now malloc.c from
-	libc/stdlib will be used for h8300hms.
-	
-Thu Jun 18 16:56:05 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/mn10300/strlen.S (_strlen): New optimized assembler
-	version that can be built either for speed or size.
-	* libc/machine/mn10300/memset.S (_memset): ditto
-	* libc/machine/mn10300/memchr.S (_memchr): ditto
-	* libc/machine/mn10300/memcpy.S (_memcpy): ditto
-	* libc/machine/mn10300/memcmp.S (_memcmp): ditto
-	* libc/machine/mn10300/strchr.S (_strchr): ditto
-	* libc/machine/mn10300/strcmp.S (_strcmp): ditto
-	* libc/machine/mn10300/strcpy.S (_strcpy): ditto
-	* libc/machine/mn10300/Makefile.in: Added entries for
- 	memchr.o, memcmp.o, memcpy.o, memset.o, strchr.o, 
-	strcmp.o, strcpy.o, and strlen.o.
-
-Wed Jun 17 12:50:26 1998  Mark Alexander  <marka@cygnus.com>
-
-	* configure.in: Don't use libc/sys/sysmec for MN10200; it's
-	been replaced with libgloss/mn10200.
-
-Fri Jun 12 14:34:39 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/string/strchr.c (strchr): Make s a constant pointer to
-	avoid warning.
-
-Tue Jun  9 16:29:30 1998  Jason Molenda  (crash@bugshack.cygnus.com)
-
-	* configure.in (target == arm* or thumb*): Define ARM_RDI_MONITOR
-	instead of ARM_RDP_MONITOR (sys/libc/arm/crt0.S to assume Angel
-	board SWIs instead of Demon board SWIs).
-
-Thu Jun  4 12:16:46 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/string/strncat.c (strncat):  Make -Os act the same as
-	PREFER_SIZE_OVER_SPEED being defined.
-
-Wed Jun  3 17:52:33 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/string/memchr.c (memchr): Make -Os act the same as
-	PREFER_SIZE_OVER_SPEED being defined.
-	* libc/string/memcmp.c (memcmp): Ditto.
-	* libc/string/memcpy.c (memcpy): Ditto.
-	* libc/string/memset.c (memset): Ditto.
-	* libc/string/strcat.c (strcat): Ditto.
-	* libc/string/strchr.c (strchr): Ditto.
-	* libc/string/strcmp.c (strcmp): Ditto.
-	* libc/string/strcpy.c (strcpy): Ditto.
-	* libc/string/strlen.c (strlen): Ditto.
-	* libc/string/strncat.c (strncat): Ditto.
-	* libc/string/strncmp.c (strncmp): Ditto.
-	* libc/string/strncpy.c (strncpy): Ditto.
-
-Mon Jun  1 15:25:07 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/itimer.h: remove
-	* libc/include/sys/time.h: itimer stuff should be here
-
-Mon Jun  1 16:31:29 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdio/vfprintf.c (cvt): Changed code to look at sign
-	bit instead of comparing to 0 so -0.0 can be printed correctly.
-
-Sat May 30 09:33:51 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/stdlib/mprec.c (b2d): Inilialize d in non-VAX case too.
-
-Fri May 29 22:25:10 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/unistd.h: fix sync() proto
-	* libc/include/sys/fcntl.h: remove _close which is already
-	defined in unistd.h.
-	* libc/include/sys/time.h: add getitimer proto
-
-Fri May 29 16:10:28 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/string/strchr.c: convert arg to unsigned char
-	* libc/include/stdlib.h: add protos for random, srandom
-	* libc/include/sys/stat.h: add lstat proto
-	* libc/include/sys/time.h: add setitimer proto
-	* libc/include/sys/unistd.h: add readlink, symlink protos
-	* libc/include/process.h: instead of including windows.h and using
-	HANDLEs in sexec protos, just use void *s.  Need to include
-	sys/types.h.
-
-Fri May 29 03:04:29 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/fcntl.h: add _close proto for Cygwin32
-
-Thu May 28 16:34:21 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/process.h: add secure exec protos
-
-Wed May 27 13:54:51 1998  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/stdlib/dtoa.c (_dtoa_r): Use "double_union" for variables
-	which are accessed as both doubles and integers.
-	* libc/stdlib/mprec.c (ulp, b2d, ratio): Likewise.
-	* libc/stdlib/strtod.c (_strtod_r): Likewise.
-	* libc/stdlib/mprec.h: Add "union double_union" and change
-	word0/word1 macros to use it.
-
-Tue May 26 18:04:21 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/signal.h: add __cplusplus wrapper
-
-Tue May 26 15:10:22 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/utime.h: new generic file that gets replaced by
-	libc/sys/SYSDIR/sys/utime.h on systems that support the utime
-	function.
-	* sys/cygwin32/sys/utime.h: use _EXFUN in utime proto
-	* libc/include/time.h: remove duplicate utime proto
-	* libc/include/utime.h: add comment
-
-Sun May 24 23:56:20 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/time.h: Add missing include to
-	allow use of _EXFUN.  Remove times function that is
-	already defined in times.h.
-
-Sun May 24 01:32:14 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/time.h: Fix typo in tzset.
-
-Fri May 22 17:00:48 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/time.h: add missing Cygwin32 function protos
-	* libc/include/sys/unistd.h: ditto
-	* libc/include/time.h: ditto
-
-Wed May 20 20:35:11 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin32/sys/param.h: add protected NULL def, remove
-	FIXME.
-	* libc/include/sys/types.h: add a new __MS_types__ section
-	to define vm_offset_t, vm_size_t, int32_t et al, register_t,
-	__BIT_TYPES_DEFINED__.
-
-Wed May 20 18:49:21 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin32/sys/param.h: move here from winsup/include/sys
-	since it overrides the one in libc/include/sys.  Also, start
-	including types.h.
-
-Wed May 20 14:45:40 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libm/math/Makefile.in: add s_signgam.o to obj list
-
-Tue May 19 11:57:11 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT): Initialize current locale to "C".
-
-Mon May 18 22:36:12 1998  Christopher Faylor <cgf@cygnus.com>
-
-	* libc/include/sys/signal.h: cygwin32 exports sig{empty,add}set,
-	so don't use defines.
-
-Mon May 18 19:01:02 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/sys/d10v/crt0.S: Use correct stab for 16-bit ints.
-
-Sun May 17 18:40:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
-
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): Accept a NULL
- 	_current_locale as default locale.
-
-Sat May 16 21:59:59 1998  Bob Manson  <manson@charmed.cygnus.com>
-
-	* libc/stdlib/mallocr.c (mALLOc): Add explicit tests for
- 	insufficient space in a chunk.
-
-Tue May 12 14:41:01 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* configure.in (links): Added check for --enable-newlib-mb configure
-	option which defines the MB_CAPABLE macro.
-	* libc/locale/locale.c (_setlocale_r): Added support for setting
-	LC_CTYPE to "C-JIS", "C-SJIS" or "C-EUCJP", when MB_CAPABLE is
-	defined.
-	* libc/stdlib/mbtowc_r.c (_mbtowc_r): New function _mbtowc_r that
-	implements mbtowc() with multibyte support for JIS, SJIS, and EUC-JP.
-	* libc/stdlib/wctomb_r.c (_wctomb_r): New function _wctomb_r that
-	implements wctomb() with multibyte support for JIS, SJIS, and EUC-JP.
-	* libc/stdlib/mbstowcs_r.c (_mbstowcs_r): New function _mbstowcs_r that
- 	implements mbstowcs() with multibyte support for JIS, SJIS, and EUC-JP.
-	* libc/stdlib/wcstombs_r.c (_wcstombs_r): New function _wcstomb_r that implements
-	wcstombs() with multibyte support for JIS, SJIS, and EUC-JP.
-	* libc/stdlib/Makefile.in: Added new multibyte
-	routines: _mbtowc_r(), _wctomb_r(), _mbstowcs_r(), and _wcstombs_r().
-	* libc/include/stdlib.h: Added declarations of _mbtowc_r(), _wctomb_r(),
-	_mbstowcs_r(), and _wcstombs_r().
-	* libc/stdlib/mbctype.h: New internal header file that contains macros to test
-	for JIS, SJIS, and EUC-JP characters.
-	* libc/stdlib/mblen.c (mblen): Added code to call _mbtowc_r() if
- 	MB_CAPABLE defined.
-	* libc/stdlib/mbtowc.c (mbtowc): Added code to call _mbtowc_r() if
-	MB_CAPABLE defined.
-	* libc/stdlib/wctomb.c (wctomb): Added code to call _wctomb_r() if
-	MB_CAPABLE defined.
-	* libc/stdlib/mbstowcs.c (mbstowcs): Added code to call _mbstowcs_r()
-	if MB_CAPABLE defined.
-	* libc/stdlib/wcstombs.c (wcstombs): Added code to call _wcstombs_r()
-	if MB_CAPABLE defined.
-	* libc/stdio/vfscanf.c (__svfscanf): Added multibyte tolerance
-	to the format string processing when MB_CAPABLE.
-	* libc/stdio/vfprintf.c (_VFPRINTF_R): Changed mbtowc() call to
-	call _mbtowc_r().
-
-Tue May  5 16:07:23 1998  Nick Clifton  <nickc@cygnus.com>
-
-	The following modifications are courtesy of Anthony Thompson,
-	athompson@cambridge.arm.com:
-	* libc/sys/arm/syscalls.c: Initialise and track stdin/out/err for
-	boith RDI and RDP monitors.
-	* libc/sys/arm/crt0.S: Call initialise_monitor_handles() for both
-	RDI and RDP monitors.
-
-Wed Apr 29 15:22:15 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* configure.in (links): Added -DHAVE_GETTIMEOFDAY for arm and thumb.
-	* libc/sys/arm/syscalls.c (_gettimeofday _times): Added functions.
-	(_swiopen): Fixed open flags to treat write with append as just append.
-	(_swilseek): Fixed lseek support to properly handle offsets from SEEK_END.
-	* libc/sys/arm/sys/param.h: New file to override param.h for ARM.
-
-Fri Apr 24 18:00:09 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/memcpy.S (L_odddst, big endian version):
-	When needing to transfer an initial 2-byte-word, store as
-	two single bytes.
-
-Wed Apr 22 17:56:03 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/sys/sh/crt0.S (start): Handle __SH4_SINGLE_ONLY__ like
-	__SH3E__ .
-	* libc/machine/sh/memcpy.S (DELAYED_BRANCHES, SL): Likewise.
-	* libc/include/machine/ieeefp.h (_DOUBLE_IS_32BITS): Likewise.
-
-Wed Apr 22 12:28:03 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* configure.in (target_cflags): If --enable-target-optspace, use
-	-Os to compile newlib rather than -O2.  Default to using -Os for
-	d10v, d30v and m32r if --{enable,disable}-target-optspace is not
-	used.
-
-Tue Apr 21 23:13:34 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/machine/setjmp.h: change sigsetjmp and
-        siglongjmp definitions to use an array instead of a struct
-        for __CYGWIN32__
-
-Tue Apr 14 11:47:47 1998  Doug Evans  <devans@canuck.cygnus.com>
-
-	* libc/reent/impure.c (__ATTRIBUTE_IMPURE_DATA__): Fix spelling.
-
-Mon Apr  6 15:05:08 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>
-
-	* libc/string/strxfrm.c: fix to get correct return value
-
-Wed Apr  1 16:09:05 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/crt0.S: Set top of RAM to be 0x800000 for PE
-	builds.  Make mode change labels global so that they will be seen
-	by the debugger.
-
-Wed Mar 18 09:45:10 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.in (links): Do not use ARM debiugging protocols for PE
-	builds.
-
-	* libc/sys/arm/syscalls.c (_sbrk): Add "_sbrk: " to error
-	message. 
-
-Fri Mar 13 11:24:34 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/stdio/findfp.c (__sinit): Made stdout default to
-	line buffered mode as defined by ANSI.
-
-Tue Mar 10 11:41:26 1997  Bob Manson  <manson@charmed.cygnus.com>
-
-	* libc/include/sys/itimer.h: New file.
-
-	* libc/signal/signal.c (__sigtramp_r,__sigtramp): New functions.
-
-Mon Mar  9 14:19:26 1998  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/machine/sh/memcpy.S: (_memcpy): Fix for execute/memcpy-1.c
-	failure.
-
-Fri Feb 27 13:56:10 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/machine/d30v/setjmp.S (longjmp): Fix order of parallel
-	insns.
-
-Wed Feb 25 09:29:54 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_open): Add varags to conform to prototype.
-
-Tue Feb 24 18:00:13 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/machine/d30v/{setjmp.S,Makefile.in}: New files for D30V
-	support.
-
-	* libc/include/machine/setjmp.h: Add D30V support.
-
-	* configure.in (d30v-*): Add d30v machine directory.
-
-Mon Feb 23 09:32:58 1998  Mark Alexander  <marka@cygnus.com>
-
-	* configure.in: Don't use libc/sys/sysmec for MN10300; it's
-	been replaced with libgloss/mn10300.
-
-Sat Feb 21 17:44:43 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdlib/mallocr.c: remove __malloc_copy routine now that
-	it is no longer needed.
-
-Thu Feb 19 16:15:10 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/sys/signal.h: add sigpause proto for Cygwin32
-
-Wed Feb 18 23:51:08 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdio/fdopen.c (fdopen): Make all writes go to the end of
-        the file when O_APPEND is set, wherever the EOF happens to be at
-	that time. 
-
-Wed Feb 18 23:25:02 1998  Geoffrey Noer  <noer@cygnus.com>
-	
-	patch from cgf@bbc.com (Christopher Faylor):
-	* libc/stdio/freopen.c (freopen): Conform to standard UNIX
-	convention of closing fp prior to attempting to open the file
-	argument.  This allows correct operation when reopening
-	stdin/stdout/stderr.  Replaces last freopen.c patch.
-
-Wed Feb 18 16:27:40 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        patch from cgf@bbc.com (Christopher Faylor):
-        * libc/stdio/freopen.c: freopen was not preserving the fd
-        of the stream being operated on.  This confuses programs that
-        expect that the handles for stdout and stderr will be 1 and 2.
-
-Mon Feb 16 23:34:07 1998  Andrew Cagney  <cagney@b1.cygnus.com>
-
-	* libc/sys/d10v/crt0.S (_start): Set PSW{SW} - select SPU.
-
-Thu Feb 12 15:09:20 1998  Ranjith Kumaran <ranjith@cygnus.com>
-
-	* libc/sys/go32/longjmp.S: Fix longjmp to not return 0.
-
-Wed Feb 11 17:50:45 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/powerpc/setjmp.S (setjmp, longjmp): Alignment code
-	altered to not use a branch.  Also added hint that last
-	bclr in longjmp will likely result in branch.
-	
-
-Mon Feb  9 03:44:02 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/sys/cygwin32/crt0.c: add missing args to main() extern
-
-Fri Feb  6 16:32:32 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/crt0.S (_start): Initialise _ctbp even for
-	v850 builds.
-
-	* configure.in: Add -msmall-sld to target_cflags for v850 builds. 
-
-Wed Feb  4 16:56:20 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/powerpc/setjmp.S (longjmp): Fixed code
-	that loads FR14 to specify offset of 8 rather than 4
-	so it loads from offset 96 (where setjmp stored it).
-
-Tue Feb  3 18:08:34 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/sh/memcpy.S: (_memcpy): Update to
-	latest version supplied by customer.
-	* libc/machine/sh/memset.S (_memset): Ditto.
-
-Mon Feb  2 16:20:39 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/Makefile.in (OFILES): Add link.o (for
-	PR14730). 
-
-Mon Feb  2 15:13:26 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/string.h: remove redefinition of ffs
-
-Wed Jan 28 13:30:14 1998  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/sys/signal.h: include _ansi.h so _EXFUN is
-	defined
-
-Wed Jan 28 10:38:34 1998  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* libc/machine/tic80/setjmp.S: Adding _setjmp to allow
- 	TI Libraries to link to libc.a
-	
-Sat Jan 24 10:15:56 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/sys/fcntl.h (_open,_fcntl): Add prototypes.
-	* libc/include/sys/stat.h (_{,f}stat): Ditto.
-	* libc/include/sys/wait.h (_wait): Ditto.
-	* libc/include/sys/unistd.h (_close,_fork,_getpid): Ditto.
-	(_link,_lseek,_read,_sbrk,_unlink,_write): Ditto.
-
-Fri Jan 23 11:32:10 1998  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/machine/d10v/setjmp.S: Change to new ABI.  Add simple
-	minded stabs so function name shows up when running the simulator
-	with -t.
-	* libc/sys/d10v/{crt0,trap}.S: Ditto.
-
-Thu Jan 22 15:57:14 1998  Fred Fish  <fnf@cygnus.com>
-
-	* libc/sys/d10v/trap.S: Change syscalls to use trap 15. 
-	* libc/sys/d10v/crt0.S: Use R6 where we used to use R2.
-	Use R5 where we used to use R3.
-	
-Wed Jan 21 14:22:23 1998  Bill Moyer <billm@cygnus.com>
-
-	* libc/stdlib/getopt.c (getopt): replaced __progname
-	with nargv[0] to improve portability to imbedded systems.
-
-Thu Jan 15 12:32:38 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (initialise_angel_handles): Applied
-	patch supplied by Tont.Thompson@arm.com to fix the creation of the
-	stdout file.
-
-Wed Jan 14 13:00:19 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/stdio/tmpnam.c (worker): Generate a different file name
-	each time.
-
-	* libc/posix/popen.c (popen): If __CYGWIN32__, and execing /bin/sh
-	fails, try an execlp for sh.
-
-	* host/any (INCLUDES): If target_os is cygwin32, then add a -I
-	option for the winsup include directory.
-
-Wed Jan  7 17:02:58 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/syscalls.c: Applied patches for Angel based remote
-	debugging interface from Tony.Thompson@arm.com.
-	
-	* libc/sys/arm/crt0.S (_mainCRTStartup): ditto.
-	* libc/sys/arm/swi.h: ditto.
-
-Tue Jan  6 14:15:10 1998  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin32/sys/dirent.h: add __d_dirhash field to
-	DIR struct used for readdir hashes.
-
-Thu Jan  1 11:22:22 1998  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/string/strchr.c: Use "unsigned chars" as necessary.
-
-Wed Dec 31 04:25:30 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/stdlib/mallocr.c (idx2binblock): Don't lose on 16bit
-	integer targets.
-
-Sat Dec 13 15:11:06 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/stdlib/mallocr.c (__malloc_copy): New function, compiled if
-	INTERNAL_NEWLIB and __CYGWIN32__ and DEFINE_MALLOC.
-	* libc/include/malloc.h: Add extern "C" if __cplusplus.
-	(__malloc_copy): Declare.
-
-Wed Dec 10 12:15:54 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/stdlib/mallocr.c: If INTERNAL_NEWLIB, include
-	<sys/config.h>.
-	(POINTER_UINT): Define.
-	(DEFAULT_TRIM_THRESHOLD): Mark constants as long.
-	(MALLOC_ALIGNMENT): Don't define if already defined.
-	(malloc_extend_top): Cast pointers to POINTER_UINT, not unsigned
-	long.
-
-Tue Dec  9 19:23:42 1997  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/string/memset.c (memset): Fiddle with code so that the long
-	value being stored is not a stack value.  Unroll storing longs 4
-	times.
-
-Tue Dec  9 14:13:18 1997  Jeff Johnston  <jjohnstn@cygnus.com>
-
-	* Reduce code size for libm modules.
-	* libm/math/w_sqrt.c (sqrt): Remove call to kernel_standard
-	and simply move code into sqrt.
-	* libm/math/wrf_lgamma.c (lgammaf_r): Likewise.
-	* libm/math/wr_lgamma.c (lgamma_r): Likewise.
-	* libm/math/wrf_gamma.c (gammaf_r): Likewise.
-	* libm/math/wr_gamma.c (gamma_r): Likewise.
-	* libm/math/wf_sinh.c (sinfh): Likewise.
-	* libm/math/w_sinh.c (sinh): Likewise.
-	* libm/math/wf_scalb.c (scalbf): Likewise.
-	* libm/math/w_scalb.c (scalb): Likewise.
-	* libm/math/wf_remainder.c (remainderf): Likewise.
-	* libm/math/w_remainder.c (remainder): Likewise.
-	* libm/math/wf_pow.c (powf): Likewise.
-	* libm/math/w_pow.c (pow): Likewise.
-	* libm/math/wf_log10.c (log10f): Likewise.
-	* libm/math/w_log10.c (log10): Likewise.
-	* libm/math/wf_log.c (logf): Likewise.
-	* libm/math/w_log.c (log): Likewise.
-	* libm/math/w_lgamma.c (lgamma): Likewise.
-	* libm/math/wf_lgamma.c (lgammaf): Likewise.
-	* libm/math/wf_jn.c (jnf): Likewise.
-	* libm/math/w_jn.c (jn): Likewise.
-	* libm/math/wf_j1.c (j1f): Likewise.
-	* libm/math/w_j1.c (j1): Likewise.
-	* libm/math/wf_j0.c (j0f): Likewise.
-	* libm/math/w_j0.c (j0): Likewise.
-	* libm/math/wf_hypot.c (hypotf): Likewise.
-	* libm/math/w_hypot.c (hypot): Likewise.
-	* libm/math/wf_gamma.c (gammaf): Likewise.
-	* libm/math/w_gamma.c (gamma): Likewise.
-	* libm/math/wf_fmod.c (fmodf): Likewise.
-	* libm/math/w_fmod.c (fmod): Likewise.
-	* libm/math/wf_exp.c (expf): Likewise.
-	* libm/math/w_exp.c (exp): Likewise.
-	* libm/math/wf_cosh.c (coshf): Likewise.
-	* libm/math/w_cosh.c (cosh): Likewise.
-	* libm/math/wf_atanh.c (atanhf): Likewise.
-	* libm/math/w_atanh.c (atanh): Likewise.
-	* libm/math/wf_atan2.c (atan2f): Likewise.
-	* libm/math/w_atan2.c (atan2): Likewise.
-	* libm/math/wf_asin.c (asinf): Likewise.
-	* libm/math/w_asin.c (asin): Likewise.
-	* libm/math/wf_acosh.c (acoshf): Likewise.
-	* libm/math/w_acosh.c (acosh): Likewise.
-	* libm/math/wf_acos.c (asocf): Likewise.
-	* libm/math/w_acos.c (acos): Likewise.
-	* libm/math/wf_sqrt.c (sqrtf): Likewise.
-	* libm/math/k_standard.c (_k_standard): Don't require SVID behavior
-	for embedded systems.
-
-Mon Dec  8 12:12:58 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/stdlib/mallocr.c (malloc_extend_top): Add patch from Doug
-	Lea in case of a foreign sbrk.
-
-Fri Dec  5 23:27:28 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	Incorporate Doug Lea's malloc:
-	* libc/stdlib/mallocr.c: Completely replaced.
-	* libc/stdlib/malloc.c: Document malloc_usable_size and memalign.
-	(realloc): Remove.
-	* libc/stdlib/calloc.c (calloc): Just call _calloc_r.
-	* libc/stdlib/mstats.c: Document mallinfo, malloc_stats, and
-	mallopt.
-	(mallinfo, malloc_stats, mallopt): New functions.
-	(_mstats_r): Just call _malloc_stats_r.
-	* libc/stdlib/malign.c: New file.
-	* libc/stdlib/mlock.c: New file.
-	* libc/stdlib/msize.c: New file.
-	* libc/stdlib/mtrim.c: New file.
-	* libc/stdlib/realloc.c: New file.
-	* libc/stdlib/valloc.c: New file.
-	* libc/stdlib/malloc.h: Remove.
-	* libc/stdlib/callocr.c: Remove.
-	* libc/stdlib/Makefile.in (OFILES): Add cfreer.o, freer.o,
-	malign.o, malignr.o, mallinfor.o, malloptr.o, mallstatsr.o,
-	mlock.o, msize.o, msizer.o, mtrim.o, pvallocr.o, realloc.o,
-	reallocr.o, valloc.o, vallocr.o.
-	(CHEWOUT_FILES): Add mlock.def, mstats.def.
-	(MALLOC_CFLAGS): New variable.
-	(mallocr.o): New target, build from mallocr.c.
-	(freer.o, reallocr.o, callocr.o, cfreer.o, malignr.o): Likewise.
-	(vallocr.o, pvallocr.o, mallinfor.o, mallstatsr.o): Likewise.
-	(msizer.o, malloptr.o): Likewise.
-	(malign.o, mlock.o, msize.o, mtrim.o, realloc.o): New targets.
-	(valloc.o): New target.
-	* libc/stdlib/stdlib.tex: Include mlock.def and mstats.def.
-	* libc/include/malloc.h: Declare struct mallinfo, and new
-	routines.
-	* libc/include/stdlib.h (cfree): Correct declaration.
-
-Tue Dec  2 10:12:16 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Add support for Thumb target.
-
-	* libc/include/machine/ieeefp.h: Add support for Thumb target.
-
-	* configure.in (links): Add support for Thumb target.
-
-Wed Nov 26 09:56:17 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/arm/setjmp.S: Updated with version from branch.
-
-Thu Nov 20 01:21:43 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/stdio.h: add POSIX-required define L_ctermid
-	for ctermid
-
-Wed Nov 19 16:11:40 1997  Michael Meissner  <meissner@cygnus.com>
-
-	* configure.in (d30v-*-*): Define ABORT_MESSAGE, SMALL_MEMORY, in
-	addition to MISSING_SYSCALL_NAMES.
-
-Mon Nov 17 20:05:05 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/include/sys/config.h: (UINT_MAX, for D10V):  Make unsigned.
-
-Mon Nov 10 22:26:55 1997  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/string.h: change strsignal proto to return
-        a char *.  This eliminates compile problems in gdb resulting
-        from gdb's definition of strsignal in defs.h.
-
-Mon Nov 10 17:11:08 1997  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/sys/cygwin32/sys/utime.h: new (moved here from
-        winsup/include) so as not to conflict with the one in
-        libc/include.
-	* libc/include/string.h: add protos for strsignal, strtosigno
-
-Mon Nov 10 13:49:54 1997  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/sys/config.h: Define __IEEE_BIG_ENDIAN if d30v.
-
-	* configure.in (d30v-*-*): Add configuration.
-
-Thu Oct 30 14:01:23 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.in (links): Add -DARM_RD[P|I]_MONITOR to target_cflags
-	to select which kind of debug monitor is in use for an ARM target.
-
-	* libc/sys/arm/crt0.S: New version: Supports Thumb startups and
-	Angel and Demon debug monitors.  Part of this code was supplied by
-	Tony Thompson at ARM: athompso@arm.com.
-
-Fri Oct 24 18:57:05 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* strncat.c (strncat): Don't call strncpy; strncay has the wrong
-	semantics when the count is greater than the length of the second
-	source string.
-
-Thu Oct 23 01:37:41 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/signal.h: reorder CYGWIN32 signal numbers
-	* libc/include/sys/unistd.h: add protos for usleep, truncate,
-	truncate and ftruncate take off_t, not size_t
-
-Tue Oct 21 18:42:00 1997  Jim Wilson  <wilson@cygnus.com>
-
-	* libc/string/strcat.c (strcat): Add missing comment end.
-	* libc/string/strncat.c (strncat): Likewise.
-
-Tue Oct 21 17:23:34 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.in (links): Define PREFER_SIZE_OVER_SPEED for v850
-	targets. 
-	* libc/string/{memchr.c, memcmp.c, memcpy.c}: 	Add space
-	optimised version which is selected if PREFER_SIZE_OVER_SPEED is
-	defined.  
-	* libc/string/{memset.c, strcat.c, strchr.c}: Likewise.
-	* libc/string/{strcmp.c, strcpy.c, strlen.c}: Likewise.
-	* libc/string/{strncat.c, strncmp.c, strncpy.c}: Likewise.
-
-Mon Oct 13 15:12:35 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/sys/param.h (BIG_ENDIAN): Define if __i386__.
-	(LITTLE_ENDIAN, BYTE_ORDER): Likewise.
-
-Thu Oct  9 13:54:44 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/i386/setjmp.S: New file.
-	* libc/machine/i386/Makefile.in: Delete COPYOFILES.
-	(OFILES): Add setjmp.o.
-	(setjmp.o): Add rule for.
-	* configure.in: Don't set machine_dir for *-*-{go32,sco*,cygwin32}.
-
-Tue Oct  7 14:01:29 1997 Bill Moyer     (billm@cygnus.com)
-			 Jeffrey A Law  (law@cygnus.com)
-
-	* libc/string/{memchr.c, memcmp.c, memcpy.c}: Reimplement to run faster.
-	* libc/string/{memset.c, strcat.c, strchr.c}: Likewise.
-	* libc/string/{strcmp.c, strcpy.c, strlen.c}: Likewise.
-	* libc/string/{strncat.c, strncmp.c, strncpy.c}: Likewise.
-
-Mon Oct  6 14:07:59 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/Makefile.in (crt0.o trap.o): Explicit
-	rules. 
-
-	* libc/include/sys/config.h: Use __v850 to select v850
-	endianness. 
-
-	* libc/include/machine/setjmp.h: Use __v850 to select v850 jump
-	buffer size.
-
-	* libc/include/machine/ieeefp.h: Use __v850 to select v850
-	endianness. 
-
-Thu Sep 25 14:11:37 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdlib/setenv.c: change unsetenv definition to match
-	style of setenv (with _DEFUN).  The string should be a const.
-	* libc/include/stdlib.h: unsetenv proto should return void.
-
-Tue Sep 23 18:17:20 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/stdlib.h: define unsetenv proto for __CYGWIN32__
-
-Thu Sep 18 12:50:15 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* libc/stdio/glue.h: remove.
-	* libc/stdio/findfp.c, libc/stdio/fwalk.c: remove #include "glue.h"
-	* libc/stdio/Makefile.in: remove glue.h dependencies
-
-Wed Sep 17 17:42:27 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/crt0.S: Created V850e version.
-	
-Tue Sep  9 10:40:57 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in (target_cpu): Add `arc'.
-
-Tue Sep  9 10:40:42 1997  Joel Sherrill  <joel@OARcorp.com>
-
-	* newlib/configure.in (*-*-rtems*): Add -DSIGNAL_PROVIDED and 
-	  -DREENTRANT_SYSCALLS_PROVIDED to the target_cflags.
-	* newlib/libc/include/sys/errno.h: Add ENOTSUP.
-	* newlib/libc/reent/reent.c: Add _wrapup_reent.
-	* newlib/libc/sys/rtems/sys/types.h: Avoid redefinitions for go32.
-
-Sun Sep  7 16:41:41 1997  Gavin Koch  <gavin@cygnus.com>
-
-	* libc/machine/mips/setjmp.S: Handle mips16 builds.
-
-Thu Aug 21 20:05:38 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/stdio.h (siprintf): Declare.
-
-Mon Aug 18 11:19:13 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/Makefile.in (.c.o): Add rule that includes
-	TARGET_CFLAGS and NEWLIB_FLAGS.
-
-Mon Aug 18 11:15:43 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.in (links): Add support for v850ea target.
-
-Mon Aug 18 11:15:43 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* configure.in (links): Add support for v850e target.
-
-Wed Aug 13 19:16:54 1997  Nick Clifton  <nickc@cygnus.com>
-
-	* libc/sys/sysnecv850/crt0.S: Remove initial setting of r0 to 0.
-
-Mon Aug 11 15:49:54 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in (arc-*-*): Add support for.
-	* libc/include/machine/ieeefp.h (__arc__): Add support for the ARC.
-
-Fri Jul 25 17:37:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
-
-	* libc/sys/sh/crt0.S (start): Add fpscr initialization for SH4.
-
-Thu Jul 24 18:32:17 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdlib/bsearch.c (bsearch): remove last unneeded
-	comparison which accesses invalid memory when the key is
-	larger than the last member of the array.
-	* libc/include/machine/setjmp.h: add sigsetjmp, siglongjmp
-	for CYGWIN32
-	* libc/include/sys/unistd.h: add _POSIX defines for CYGWIN32
-
-Tue Jul 22 16:03:06 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/stdlib.h (realpath): Declare if __CYGWIN32__ and
-	not _STRICT_ANSI.
-
-Thu Jul 10 15:11:52 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libm/math/k_standard.c (__kernel_standard): Call fflush(stdout)
-	ifndef _USE_WRITE, instead of ifdef _USE_WRITE.
-
-Thu Jul 10 16:00:09 1997  Mike Meissner  <meissner@cygnus.com>
-
-	* libc/machine/tic80/setjmp.S (setjmp,longjmp): Use ld.d and st.d
-	to load/store memory.
-
-Mon Jul  7 17:38:17 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/sys/fcntl.h: Define _O_* symbols with leading
-	underscores if _WIN32.
-
-Wed Jul  2 10:07:20 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libm/math/k_standard.c (__kernel_standard): Delete reentrancy
-	support ifdef _USE_WRITE missed in last change.
-	From Anders Blomdell <anders.blomdell@control.lth.se>.
-
-Wed Jun 25 10:18:49 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/stdio/tmpnam.c (worker): Handle _open_r being stubbed out.
-	(_tmpnam_r, _tempnam_r): Update.
-
-Wed Jun 25 00:16:55 1997  Mark Alexander  <marka@cygnus.com>
-
-	* libc/machine/sparc/setjmp.S: New file.
-	* libc/machine/sparc/Makefile.in: Add setjmp.
-	* libc/include/machine/setjmp.h: Increase jmpbuf size for sparc.
-
-Tue Jun 24 23:27:38 1997  Mark Alexander  <marka@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Use __TIC80__ instead of __tic80__.
-
-Tue Jun 24 14:53:40 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	From Joel Sherrill <joel@oarcorp.com>.
-	* libc/stdlib/getenv.c (_findenv): Avoid dereferencing null `environ'.
-
-	Add rtems support.  From Joel Sherrill <joel@oarcorp.com>.
-	* configure.in: Recognize *-*-rtems*.
-	* libc/sys/rtems/{Makefile.in,crt0.c,dummysys.c}: New files.
-	* libc/sys/rtems/sys/{features.h,sched.h,siginfo.h,signal.h,
-	time.h,times.h,types.h}: New files.
-	* libc/sys/rtems/include/{limits.h,signal.h,time.h}. New files.
-
-Fri Jun 20 11:13:16 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	patch from sos@prospect.com.ru (Sergey Okhapkin):
-        * include/sys/wait.h: correct operator precidence bug
-        in WIFSIGNALED
-
-Wed Jun 18 22:08:27 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/stdlib.h: remove unsetenv proto since it conflicts
-	with newlib's unsetenv function
-	* libc/sys/cygwin32/sys: new directory for includes
-	* libc/sys/cygwin32/sys/dirent.h: move cygwin32's dirent.h
-	here from winsup/include/sys
-
-Mon Jun 16 21:02:22 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/unistd.h: _exit should only be
-	labelled noreturn when not __CYGWIN32__
-	* libc/include/stdlib.h: for __CYGWIN32__, add proto for unsetenv
-	* libc/include/sys/signal.h: add SIGIO to _WIN32 list and
-	increment NSIG
-
-Thu Jun 12 18:52:41 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/sys/time.h: Only define timeval and timezone if
-	_GNU_H_WINDOWS32_SOCKETS is not defined.
-	* libc/include/sys/stat.h: If _WIN32, define _S_IFMT, etc.
-
-Wed Jun 11 09:46:26 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/machine/mn10200/setjmp.S: Implement setjmp/longjmp
-	* libc/machine/mn10300/setjmp.S: Likewise.
-
-	* libc/sys/sysmec/crt0.S: Use "call" instead of "calls" for
-	the mn10300 (more relaxing opportunities).
-
-Tue Jun 10 17:24:45 1997  Mike Meissner  <meissner@cygnus.com>
-
-	* configure.in (powerpc*-*-{eabi,elf,linux,rtems,sysv,solaris}):
-	Build libraries with -mstrict-align.
-
-Fri Jun  6 14:07:59 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/string/strlwr.c: New file.
-	* libc/string/strupr.c: New file.
-	* libc/include/string.h: Declare strlwr and strupr.
-	* libc/string/Makefile.in (OFILES): Add strlwr.o and strupr.o.
-	(CHEWOUT_FILES): Add strlwr.def and strupr.def.
-	(strlwr.o, strupr.o): New targets.
-	* libc/string/strings.tex: Include strlwr and strupr docs.
-
-	* libc/include/sys/types.h: Don't define u_char, et. al., if
-	_GNU_H_WINDOWS32_SOCKETS is defined.  Likewise for fd_set,
-	et. al.  Make FD_SETSIZE default 64 rather than 60.  Define
-	_types_fd_set rather than fd_set, and define fd_set as a macro.
-
-	* libc/include/malloc.h: New file.
-
-	* libc/include/string.h: Define strcmpi, stricmp, strncmpi, and
-	strnicmp if they are not already defined.
-
-	* libc/include/time.h: If __CYGWIN32__, declare tzset and define
-	_timezone, _daylight, and _tzname.
-
-Wed Jun  4 12:51:16 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in: Sort all configuration tables.
-
-	From Joel Sherrill <joel@oarcorp.com>
-	* Makefile.in (stmp-targ-include): Copy $(sys_dir)/include/*.h.
-
-Tue Jun  3 14:47:46 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/sys/signal.h: Don't include <sys/types.h>.  Just
-	use int when declaring kill.
-
-	* libc/include/sys/timeb.h: New file.
-
-Mon Jun  2 12:06:58 1997  Geoffrey Noer  <noer@cirdan.cygnus.com>
-
-	* libc/include/sys/time.h: add itimer support for Cygwin32
-
-Mon May 19 11:56:46 1997  Mike Meissner  <meissner@cygnus.com>
-
-	* libc/stdlib/abort.c (abort): If ABORT_MESSAGE is defined, write
-	out a message that abort was called to stderr.
-
-Fri May 16 15:02:59 1997  Bob Manson  <manson@charmed.cygnus.com>
-
-	* libc/sys/sysmec/fstat.c (_fstat): Set st_blksize to 4096
-	so that libio doesn't freak.
-
-	* libc/sys/sysmec/sbrk.c (_sbrk): The argument is a size_t, not
-	int.
-
-	* libc/stdlib/mallocr.c (_morecore_r): Use size_t for
-	memory sizes, not int.
-
-Wed May 14 21:16:58 1997  Bob Manson  <manson@charmed.cygnus.com>
-
-	* libm/math/ef_hypot.c: Use long constants where
- 	appropriate.
-	* libm/math/ef_sqrt.c: Ditto.
-
-	* libc/sys/sysmec/times.c(_times): Change to times.
-
-	* libc/sys/sysmec/read.c(_read): The third argument is
-	size_t.
-	* libc/sys/sysmec/write.c (_write): Ditto.
-
-	* libc/sys/sysmec/lseek.c: Include unistd.h for off_t.
-	(_lseek): It's off_t for the second argument.
-
-Wed May 14 15:23:36 1997  Mike Meissner  <meissner@cygnus.com>
-
-	* libc/include/sys/config.h (__IEEE_LITTLE_ENDIAN): Define here,
-	as well as machine/ieeefp.h.
-
-Thu May  8 15:47:25 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/signal.h: add signal protos for winsup
-	functions (when __CYGWIN32__), include types.h
-	* libc/include/sys/types.h: Change __go32_types__ internal
-	define to __MS_types__ since it's used for more than just
-	GO32 configs.  Define this if GO32, __MSDOS__, or _WIN32 are
-	defined.
-	* libc/include/sys/unistd.h: add ftruncate proto for
-	winsup functions (when __CYGWIN32__)
-
-Fri Apr 25 10:10:16 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/h8300hms/sbrk.c (stack_ptr): Add definition.
-
-Thu Apr 24 15:46:51 1997  Mike Stump  <mrs@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Add tic80 support.
-	* libc/machine/tic80/setjmp.S: Likewise.
-
-Tue Apr 22 16:54:40 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
-
-        * libc/sys/cygwin32/crt0.c: Add reference to main() so we can
-        link programs from libraries only (such as in the X11
-        distribution)
-
-Mon Apr 21 15:02:12 1997  Fred Fish  <fnf@cygnus.com>
-
-	* libc/sys/arm/syscalls.c (signal): Remove stub, signal()
-	supplied elsewhere in newlib.
-
-Mon Apr 14 16:25:55 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Makefile.in (INSTALL): Change install.sh to install-sh.
-
-Fri Apr 11 17:04:02 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* README: update WWW address for on-line documentation.
-
-Wed Apr  9 00:38:13 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/sys/signal.h: for _WIN32, define SIGCONT and
-	increment NSIG
-
-Mon Apr  7 23:54:00 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/crt0.S: Update for new calling conventions on the
-	mn10300.
-	* libc/sys/sysmec/trap.S: Don't compare a register to itself.
-
-Tue Mar 25 08:47:43 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/arm/syscalls.c: Fix/add stack/heap collision detection.
-	* libc/sys/d10v/syscalls.c: Likewise.
-	* libc/sys/h8300hms/sbrk.c: Likewise.
-	* libc/sys/h8500hms/syscalls.c: Likewise.
-	* libc/sys/m88kbug/syscalls.c: Likewise.
-	* libc/sys/sh/syscalls.c: Likewise.
-	* libc/sys/sysmec/sbrk.c: Likewise.
-	* libc/sys/sysnecv850/sbrk.c: Likewise.
-	* libc/sys/w65/syscalls.c: Likewise.
-	* libc/sys.tex: Update sbrk sample code to include stack/heap collision.
-
-Tue Mar 18 14:14:34 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/trap.S: Use "syscall" to trigger an
-	emulated syscall instead of "trap".
-
-Fri Mar 14 11:26:13 1997  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/sys/d10v/trap.S (__trap0): Use trap 15 for system calls,
-	not trap 0.
-
-Sun Mar  9 23:27:04 1997  Doug Evans  <dje@seba.cygnus.com>
-
-	* configure.in (m32r-*-*): Add -msdata=sdata to target_cflags.
-
-Sat Mar  8 09:05:01 1997  Fred Fish  <fnf@cygnus.com>
-
-	* libc/machine/arm/Makefile.in: Fix comment, is for "arm"
-	not "sh".
-	* libc/machine/m32r/Makefile.in: Fix comment, is for "m32r"
-	not "d10v".
-	* libc/sys/tic80/crt0.c: New file for TIc80.
-	* libc/sys/tic80/Makefile.in: New file for TIc80.
-	* libc/machine/tic80/Makefile.in: New file for TIc80.
-
-Wed Mar  5 11:32:12 1997  J.T. Conklin  <jtc@cygnus.com>
-
-	* libc/machine/sh/memcpy.S: New file.
-	* libc/machine/sh/memset.S: New file.
-	* libc/machine/sh/Makefile.in (OFILES): Add memcpy.o and memset.o
-
-Thu Feb 27 16:27:55 1997  Fred Fish  <fnf@cygnus.com>
-
-	* libc/include/machine/ieeefp.h (_IEEE_LITTLE_ENDIAN): Define
-	for TIc80.
-
-Wed Feb 26 13:43:39 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/crt0.S: Handle new calling conventions for
-	the mn10200.
-
-Wed Feb 26 07:11:03 1997  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/machine/powerpc/setjmp.S (longjmp): Correct return status
-	(patch from andrew@pogo.WV.TEK.COM).
-
-Fri Feb 14 11:49:28 1997  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/m32r/setjmp.S (setjmp): Save r12.
-	(longjmp): Restore r12. Fix code that handles returning 1 if passed 0.
-
-Mon Feb 10 10:02:34 1997  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in:  Add cases for "tic80" to set machine_dir,
-	sys_dir, and syscall_dir.
-
-Sun Feb  2 17:57:15 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/sys/cygwin32/crt0.c: initialize floating pt registers
-
-Wed Jan 29 15:57:38 1997  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/math.h: avoid conflicts with ANSI C++ <exception>
-
-Mon Jan 27 12:50:01 1997  Doug Evans  <dje@seba.cygnus.com>
-
-	* libc/machine/m32r/setjmp.S: Use proper comment delimiter.
-	Use proper constant prefix.
-
-Fri Jan 24 10:59:04 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/*.c: Don't cast args to syscall to integers,
-	that loses on the mn10200 where ints and pointers are different
-	sizes.
-
-Tue Jan 14 13:29:55 PST 1997  Jeremy Allison <jra@cygnus.com>
-
-	* configure.in: Added -DSIGNAL_PROVIDED to cygwin32
-	target as signal is provided in winsup.
-
-Tue Jan 14 11:10:13 1997  Jeremy Allison <jra@cygnus.com>
-
-	* libc/include/sys/process.h: Corrected const definitions
-	in spawn functions. Added cwait.
-
-Thu Jan  2 12:22:41 1997  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/include/machine/ieeefp.h: mn10200 uses 16bit ints and 32bit
-	doubles.
-	* libc/include/sys/config.h: Similarly.
-
-Tue Dec 31 18:36:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in (sparc-sun-sunos*): Add -DSIGNAL_PROVIDED to the
-	target_cflags.
-	(i[3456]86-*-sco*): Ditto.
-
-	* libc/signal/Makefile.in (OFILES): Add signal.o.
-	(CFILES): Add signal.c.
-
-	* libc/signal/raise.c (_raise_r): Only compile code if
-	SIGNAL_PROVIDED is defined.
-
-	* libc/signal/signal.c: Redo whole file so that it works with
-	current newlib.  Use _kill_r if no signal handler provided.
-
-	* libc/sys/{go32,sparc64,sysmec}/Makefile.in: Delete raise and
-	signal stubs.
-	* libc/sys/sysvnecv70/Makefile.in: Ditto.
-	* libc/sys/sysnecv850/Makefile.in: Ditto.
-
-	* libc/sys/{go32,sparc64}/signal.c: Delete, stub no longer used.
-	* libc/sys/sysmec/{raise,signal}.c: Ditto.
-	* libc/sys/sysvnecv70/signal.s: Ditto.
-	* libc/sys/sysnecv850/raise.c: Ditto.
-
-	* libc/sys/sysnecv850/kill.c (_kill): Encode signal # so that
-	simulator and debugger can tell the difference between a signal
-	being raised and an exit system call.
-
-	* NEWS: Document software signals being provided.
-
-Mon Dec 23 11:54:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/reent/impure.c (_REENT_ATTR): Delete in favor of
-	__ATTRIBUTE_IMPURE_PTR__.  Move PowerPC definition to
-	include/sys/config.h.
-	(impure_data): Use __ATTRIBUTE_IMPURE_DATA__ for attributes.
-	Change from 'inpure_data'.
-	(_impure_ptr): Use __ATTRIBUTE_IMPURE_PTR__ for attributes.  Use
-	&impure_data, not &inpure_data.
-
-	* libc/include/sys/config.h (__ATTRIBUTE_IMPURE_PTR__): If PowerPC
-	and and System V ABI, define so that _impure_ptr lives in the
-	.sdata section.
-
-Sun Dec 22 23:33:05 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/sys/reent.h (__ATTRIBUTE_IMPURE_PTR__): Define as
-	nothing if not defined.
-	(_impure_ptr): Use __ATTRIBUTRE_IMPURE_PTR__, so a machine can set
-	its attributes.
-
-	* libc/include/sys/config.h (__ATTRIBUTE_IMPURE_PTR__): 
-
-Wed Dec 18 10:12:04 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/crt0.S: Fix mn10200 stuff.
-	* libc/sys/sysmec/trap.s: Handle mn10200 too.
-	* libc/machine/mn10200/setjmp.S: Fix mn10200 stuff.
-
-Mon Dec 16 10:05:36 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/crt0.S: Handle mn10200 too.
-
-Fri Dec 13 11:05:20 1996  Jeremy Allison <jra@cygnus.com>
-
-        * libc/include/sys/errno.h: Added net errno's.
-
-Wed Dec 11 16:24:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/misc/ffs.c: New file to support ffs function for GCC test
-	gcc.c-torture/execute/960909-1.c.
-
-	* libc/misc/Makefile.in ({O,CHEWOUT_}FILES): Add ffs.
-
-Sat Dec  7 10:12:37 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/crt0.S: Handle underscore prefix.
-	* libc/sys/sysmec/trap.S: Likewise.
-
-Fri Dec  6 15:08:49 1996  Jim Wilson  <wilson@cygnus.com>
-
-	* configure.in (mips*vr4300*-*-*): Delete use of sys/vr4300.
-	* libc/sys/vr4300/{Makefile.in,crt0.S,syscalls.c}: Delete.
-
-Wed Dec  4 16:25:27 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/signal.c: Dummy file.
-	* libc/sys/sysmec/Makefile.in: Build it.
-
-Wed Nov 27 13:10:18 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/machine/mips/machine/regdef.h: Define pc as $pc for
-	mips16.
-
-Mon Nov 25 09:58:28 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysmec/{crt0.S,trap0.S}: Actually try to implement
-	c-startup and simulator traps.
-
-
-	* libc/sys/sysmec/crt0.S: Remove bogus '_' symbol prefixing
-	* libc/sys/sysmec/trap0.S: Likewise.
-
-Sat Nov 23 09:01:03 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/stdlib/mallocr.c (ROUND_TO): If SMALL_MEMORY, set to 0x7 to
-	round to double word alignment.
-	(_morecore_r): Combine rounding up pointers to both ROUND_TO and 8
-	byte alignment.
-
-	* libc/include/sys/config.h (__IEEE_BIG_ENDIAN): Define if d10v.
-
-	* libc/sys/d10v/syscalls.c (_sbrk): Add better checks for running
-	out of memory.
-
-Mon Nov 18 13:08:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* configure.in: Handle mn10200 and mn10300.
-	* libc/include/machine/{ieeefp.h,setjmp.h}: Likewise.
-	* libc/include/sys/config.h: Likewise.
-	* libc/sys/sysmec: New directory for mec stuff.
-	* libc/machine/mn10300: New directory for mn10300 stuff.
-	* libc/machine/mn10200: Similarly for mn10200 stuff.
-
-Fri Nov 15 16:41:41 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/arm/crt0.S: Use .text, not .section .text.
-	* libc/sys/arm/syscalls.c: Rewrite to set errno properly.
-
-	* libc/include/sys/types.h (_ST_INT32): New macro, local to file.
-	(nlink_t): Change type from unsigned int to unsigned short.
-	(mode_t): Ensure size is 32 bits even if int is 16.
-	* libc/include/sys/stat.h (st_nlink): Change type to nlink_t.
-	(st_spare[123]): Change type from int to long.
-
-Fri Nov 15 11:41:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/sys/d10v/syscalls.c (_sbrk): Align initial heap_end to 8
-	byte boundary.
-
-	* configure.in (d10v*): Define SMALL_MEMORY.
-
-Mon Nov 11 10:30:44 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Add
-	-mrelocatable-lib and -mno-eabi flags.
-
-Mon Nov 11 09:01:39 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/machine/h8300/memcpy.S: Fix comments to reflect reality.
-	Fix handling of mis-aligned source operand when both the
-	destination & length are properly aligned.
-	
-Wed Oct 30 09:41:11 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850/Makefile.in (OFILES): Add
-	times.o, time.o and gettime.o
-	* libc/sys/sysnecv850/{time.c, times.c, gettime.c}: New files.
-	* libc/sys/sysnecv850/sys/syscall.h: Add SYS_times and
-	SYS_gettimeofday.
-
-Tue Oct 29 13:40:09 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850/Makefile.in (OFILES): Add access.o
-	* libc/sys/sysnecv850/access.c: New file.
-
-Mon Oct 21 19:47:02 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/sys/vr4300/Makefile.in (clean): Remove $(OFILES).
-
-	* libc/stdlib/mprec.h (word0, word1): Use __uint32_t, not unsigned
-	long.
-
-Mon Oct 21 14:43:07 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850/crt0.S: Initialize ep and gp registers.
-
-Thu Oct 17 11:47:16 1996  Doug Evans  <dje@seba.cygnus.com>
-
-	* libc/include/machine/{ieeefp.h,setjmp.h}: Add m32r support.
-	* libc/include/sys/config.h: Add m32r support.
-
-Wed Oct 16 23:08:05 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850/v850.ld: Remove.  It doesn't belong
-	here.
-
-Wed Oct 16 21:18:07 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Add D10v support.
-
-Tue Oct 15 22:28:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* configure.in: Configure the "libc/syscalls" directory for
-	the v850.
-
-	* libc/sys/sysnecv850/{close.c, execve.c, fork.c}: Add missing '_'.
-	* libc/sys/sysnecv850/{fstat.c, getpid.c, kill.c}: Likewise.
-	* libc/sys/sysnecv850/{lseek.c, open.c, read.c}: Likewise.
-	* libc/sys/sysnecv850/{sbrk.c, stat.c, unlink.c}: Likewise.
-	* libc/sys/sysnecv850/{wait.c, write.c}: Likewise.
-
-Tue Oct 15 16:24:39 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* libc/sys/sysnecv850/crt0.S (start):  Allocate spill space on
-	stack for args for main and other routines.  Zero out args for
-	main.
-
-	* libc/sys/sysnecv850/v850.ld:  New.  Linker script to layout memory
-	correctly.
-
-Tue Oct 15 11:51:42 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/stdio/findfp.c (std): Remove extraneous ';' after
-	function.
-
-	* libc/sys/d10v/sys/syscall.h (SYS_kill): Add.
-
-	* libc/sys/d10v/{syscalls.c,trap.S} (_kill,_getpid): Make these
-	real system calls now.
-
-	* libc/stdio/setvbuf (setvbuf): Cast pointers to _POINTER_INT
-	before casting them to int.
-	* libc/stdio/tmpnam.c (_tempnam_r): Ditto.
-
-	* libc/stdlib/mallocr.c (_morecore_r): Use _POINTER_INT when
-	aligning pointer.
-	* libc/string/memset.c (memset): Ditto.
-	
-	* libc/stdio/vfscanf.c (__svfscanf): When converting to pointer,
-	first convert ints to _POINTER_INT to eliminate GCC warning.
-
-	* libc/stdio/vfprintf.c (_vfprintf_r): Use _POINTER_INT when
-	processing %p.
-
-	* libm/math/ef_scalb.c (__ieee754_scalbf): Cut down range to 32000
-	from 65000 if ints are only 16 bits.
-
-	* libm/math/sf_scalbn.c (scalbnf): Cut down overflow test to 30000
-	from 50000 if ints are only 16 bits.
-
-	* libc/include/sys/config.h (_POINTER_INT): New macro, to give an
-	int type that is the same size as a pointer.
-
-	* libc/misc/dprintf.c (__dprintf): Use _POINTER_INT when
-	processing %p.
-	(get_number): Explicitly cast number to long before shifting by 16
-	or 24, in case ints are short.
-
-	* libc/include/sys/config.h (_POINTER_INT): Define as short.
-
-Wed Oct  9 16:54:32 1996  Jeremy Allison <jra@cygnus.com>
-
-	* libc/string.h: Added ffs, removed swab.
-	* libc/sys/errno.h: Added EOPNOTSUPP.
-	* libc/sys/unistd.h: Added swab.
-
-Thu Oct  3 17:08:50 1996  Jeremy Allison <jra@cygnus.com>
-
-	* libc/include/sys/stat.h: Added fchmod.
-	* libc/include/sys/unistd.h: Added fsync.
-
-Tue Oct  1 17:34:08 1996  Jeremy Allison <jra@cygnus.com>
-
-	* libc/include/sys/errno.h: Added defines for EPFNOSUPPORT (96)
-	and ECONNRESET (104) for cygwin32.
-
-Tue Oct  1 16:24:05 1996  Gavin Koch  <gavin@cygnus.com>
-
-        * libc/sys/sysnecv850/_exit.c: added _do_dtors to
-        do the static destructors.
-        
-Mon Sep 30 15:59:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* libc/sys/sysnecv850/trap.S:  Change I/O to use trap 31.
-
-Mon Sep 30 12:02:50 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/m32r/{Makefile.in,setjmp.S}: New files.
-	* configure.in: Recognize m32r-*-*.
-
-Mon Sep 30 00:34:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* libc/sys/arm/trap.S (__rt_stkovf_split_big,
- 	__rt_stkovf_split_small): Added default software stack overflow
- 	handlers, which just call SWI_Exit.
-	* libc/sys/arm/crt0.S (_mainCRTStartup): Simple software stack
- 	limit initialisation.
-
-Fri Sep 27 13:08:03 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/sys/d10v/{trap.S,sys/syscall.h}: Add time() function.
-
-Fri Sep 27 12:32:00 1996  Jeremy Allison <jra@cygnus.com>
-
-	* libc/include/sys/types.h: Added ssize_t definition.
-	
-Wed Sep 25 14:52:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/machine/d10v/setjmp.S: Use ';' for comments.
-	* libc/sys/d10v/{crt0.S,trap.S}: Ditto.
-
-	* libc/machine/d10v/setjmp.S (longjmp): Use exef0t || instead of
-	branch around a single ldi instruction.
-
-	* libc/sys/d10v/crt0.S (_start): Use auto-increment to zero bss.
-	Call exit, instead of just issuing a stop instruction.
-
-Sun Sep 22 17:26:55 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/sys/d10v/{trap.S,syscalls.c}: Add -mint32 support.
-
-Fri Sep 20 13:23:12 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/stdlib/mprec.h: Explicitly declare all large constants as
-	longs, and then cast them to __uint32_t.
-
-	* libc/include/sys/config.h: Protect against multiple inclusions.
-
-Tue Sep 17 13:10:33 1996  Mark Alexander  <marka@cygnus.com>
-
-	* configure.in (d10v*): Set syscall_dir.
-
-Sun Sep 15 10:41:59 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/sys/d10v/crt0.S: Set stack pointer.
-
-Thu Sep 12 13:02:38 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/sys/d10v/{trap.S, syscalls.c}: Rewrite most system calls
-	in assembly for efficiency.  Change calling convention to allow
-	long ints to be returned.
-
-Wed Sep 11 10:28:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/machine/v850/Makefile.in (setjmp.o): Fix dependency.
-
-Thu Sep  5 19:23:06 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/posix/execvp.c (execvp): Don't search PATH if file has '/'.
-	Handle empty entries in $PATH.
-
-Tue Sep 03 18:15:02 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/machine/d10v/setjmp.S: Make it really work.
-
-Tue Sep  3 12:16:26 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/sys/sh/crt0.S: If __ELF__, use ELF section attributes for
-	the .stack section.
-
-Tue Sep  3 10:08:45 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* sys/sysnecv850/sys/file.h: Remove.
-	* sys/sysnecv850/sys/syscall.h: New file.
-	* sys/sysnecv850/{misc.c,syscalls.c,malloc.c}: Deleted.
-	* sys/sysnecv850/{chmod.c, chown.c, close.c, creat.c} New files.
-	* sys/sysnecv850/{execv.c, execve.c, fork.c, fstat.c} New files.
-	* sys/sysnecv850/{getpid.c, isatty.c, kill.c, lseek.c} New files.
-	* sys/sysnecv850/{open.c, pipe.c, raise.c, read.c} New files.
-	* sys/sysnecv850/{stat.c, unlink.c, utime.c, wait.c} New files.
-	* sys/sysnec850/trap.S: New file.
-	* sys/sysnecv850/{_exit.c, write.c}: Use new TRAP0 mechanism for
-	syscalls.
-	* sys/sysnecv850/crt0.S: Use cmp/bl, not tst/bz.
-	* sys/sysnec850/sbrk.c: New version.
-
-Sun Sep  1 20:08:27 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* sys/sysnecv850/crt0.S: Fix order of comparison args.  Loop
-	as long as r6 is less than r7.
-
-Sun Sep  1 13:54:19 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Makefile.in (mostlyclean): Separate from clean target.  Don't
-	remove *.a or targ-include.
-	* libc/machine/sparc/Makefile.in (mostlyclean): New target.
-
-Sun Sep  1 11:35:26 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/machine/ieeefp.h (_DOUBLE_IS_32BITS): Define for
-	d10v.
-	(__SMALL_BITFIELDS): Ditto.
-
-	* libc/include/sys/config.h (_DOUBLE_IS_32BITS): Define for d10v.
-
-Sat Aug 31 16:42:36 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850/misc.c (raise, getpid, kill): Remove '_'
-	prefix.
-
-	* libc/sys/sysnecv850/sbrk.c (sbrk): Remove '_' prefix.
-	* libc/sys/sysnecv850/syscalls.c (read, lseek, close): Likewise.
-	* libc/sys/sysnecv850/syscalls.c (fstat, open, close): Likewise.
-	* libc/sys/sysnecv850/write.c (write): Likewise.
-
-	* libc/sys/sysnecv850/crt0.S: Don't try to zero out an empty
-	.bss.
-
-Fri Aug 30 11:18:45 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/sys/config.h: Define INT_MAX, UINT_MAX
-	appropriately for D10V, depending on -mint16/-mint32.
-
-Thu Aug 29 16:09:37 1996  Mark Alexander  <marka@cygnus.com>
-
-	* configure.in: Add cases for D10V.
-
-Thu Aug 29 17:03:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
-
-Wed Aug 28 21:05:52 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Fix typo.
-
-Wed Aug 28 19:47:55 1996  Mark Alexander  <marka@cygnus.com>
-
-	* libc/sys/d10v: New directory for D10V stuff.
-	* libc/include/machine/ieeefp.h: Add D10V defines.
-
-Mon Aug 26 13:34:58 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/include/sys/errno.h: Add winsup/include/sys/errno.h values:
-	ELOOP, ENOBUFS, EAFNOSUPPORT, EPROTOTYPE, ENOTSOCK, ENOPROTOOPT,
-	ESHUTDOWN, ECONNREFUSED, EADDRINUSE, ECONNABORTED, EWOULDBLOCK.
-	* libc/string/strerror.c (strerror): Add them.
-
-Thu Aug 22 16:38:19 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/sys/sysnecv850: New directory for v850 stuff.
-
-	* libc/machine/v850: New directory for v850 stuff.
-	* libc/machine/v850/setjmp.S: setjmp/longjmp support.
-
-	* configure.in: Add support for the v850.
-
-	* libc/include/machine/ieeefp.h: Add v850 defines.
-	* libc/include/machine/setjmp.h: Likewise.
-	* libc/include/sys/config.h: Add v850 defines.
-
-Sat Aug 17 04:06:36 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/machine/ieeefp.h
-	* libc/include/machine/setjmp.h
-	* libc/include/sys/fcntl.h
-	* libc/include/sys/signal.h
-	* libc/include/sys/types.h
-	* libc/stdlib/system.c:
-	Fix preprocessor defines to match new scheme (_WIN32 for WIN32
-	API availability, __CYGWIN32__ for cygwin32 environment specific).
-
-Thu Aug 15 17:09:21 1996  Geoffrey Noer  <noer@cygnus.com>
-
-        * libc/include/stdlib.h: add multibyte character functions.  Add
-        __eprintf for assert.
-
-Thu Aug 15 11:15:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/stdlib/malloc.h (MALLOC_ALIGNMENT): Use either pointer
-	arithmetic or __alignof__ to properly get the alignment, instead
-	of hardwiring it to 4.
-
-Wed Aug 14 23:43:28 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/stdio/fseek.c: add fflush call to adjust seek offset
-	on append stream (fix from NetBSD sources), adjust curoff offset
-	for ungetc's benefit.
-	* libc/stdio/ftell.c: adjust curoff offset for ungetc's benefit.
-	* libc/stdio/rewind.c: replace code with up to date NetBSD
-	code to undo hacks made to work around above problem of not
-	having fflush call mentioned above
-
-Fri Aug  2 18:28:07 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/reent/{closer.c, execr.c, fstatr.c, linkr.c, lseekr.c,
- 	openr.c, readr.c, sbrkr.c, signalr.c, statr.c, timer.c, writer.c}:
- 	Partially revert last changes.  The thread specific errno is set
- 	iff if the underlying syscall fails and the global errno is not
- 	zero.
-
-Fri Jul 19 11:41:52 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/reent/filer.c: Removed files, all functions have split out
- 	into their own files.
-	* libc/reent/{closer.c, lseekr.c, openr.c, readr.c, writer.c}: 
-	New files containing functions formally in filer.c
-	* libc/reent/Makefile.in: Updated for above change.
-
-	* libc/reent/execr.c (_fork_r, _wait_r): Set errno if underlying
- 	syscall fails, not if errno is changed.
-	* libc/reent/filer.c (_open_r, _close_r, _lseek_r, _read_r, 
-	_write_r): Likewise.
-	* libc/reent/fstatr.c (_fstat_r): Likewise.
-	* libc/reent/linkr.c (_link_r, _unlink_r): Likewise.
-	* libc/reent/sbrkr.c (_sbrk_r): Likewise.
-	* libc/reent/signalr.c (_kill_r): Likewise.
-	* libc/reent/statr.c (_stat_r): Likewise.
-	* libc/reent/timer.c (_gettimeofday_r): Likewise.
-
-	* libc/reent/{execr.c, filer.c, fstatr.c, linkr.c, sbrkr.c,
- 	signalr.c, statr.c, timer.c} (errno): declare extern rather
-	than as a common.
-
-	* libc/stdio/vfprintf.c (__sbprintf): Use the VFPRINTF macro
- 	instead of calling vfprintf so that i*printf will not require
- 	floating point support code.
-	
-Mon Jul 15 16:50:59 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/posix/execvp.c (execvp): Use posix_path_list_p to determine
-	path delimiter.
-	* libc/include/sys/unistd.h (_SC_PATH_RULES): Delete.
-	(_PATH_RULES_{UNKNOWN,WIN32,POSIX}): Delete.
-
-Thu Jul 11 14:34:14 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* libc/include/signal.h: _sig_func_ptr function takes an int
-	* libc/include/sys/signal.h: sa_handler function takes an int
-
-Tue Jul  9 21:22:32 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Simplify H8/S support.
-	* libc/include/sys/config.h: Add missing H8/S conditional.
-
-Sun Jun 30 12:05:46 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/include/sys/unistd.h (MAXPATHLEN): Add cygwin32 value.
-
-Wed Jun 26 09:57:54 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/include/machine/setjmp.h: Handle H8/S.
-	* libc/include/machine/ieeefp.h: Likewise.
-	* libc/include/sys/config.h: Likewise.
-	* libc/machine/h8300/{defines.h, memcpy.S, memset.S}: Likewise.
-	* libc/machine/h8300/{reg_memcpy.S, reg_memset.S}: Likewise.
-	* libc/machine/h8300/{strcmp.S, setjmp.S}: Likewise.
-	* libc/sys/h8300hms/crt0.S: Likewise.
-
-Tue Jun 25 23:15:45 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-        * Makefile.in (datadir): Set to $(prefix)/share.
-	(oldincludedir, docdir): Removed.
-        * doc/Makefile.in (datadir): Set to $(prefix)/share.
-	(oldincludedir, docdir): Removed.
-        * libc/Makefile.in (datadir): Set to $(prefix)/share.
-	(oldincludedir, docdir): Removed.
-        * libm/Makefile.in (datadir): Set to $(prefix)/share.
-	(oldincludedir, docdir): Removed.
-
-Fri Jun 21 19:24:41 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/sys/reent.h (_REENT_INIT): Update for change to
-	_reent struct.
-
-Wed Jun 19 14:00:09 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/posix/execvp.c: Delete _WIN32 support.  For __CYGWIN32__
-	fetch current path rules with sysconf and handler posix/win32
-	appropriately.
-
-	* libc/include/sys/unistd.h (_PATH_RULES{,_POSIX,_WIN32}): Define.
-
-	* libc/include/process.h: Prepend '_' to P_{WAIT,NOWAIT,OVERLAY}.
-	(WAIT_CHILD): Always define.
-
-Sat Jun 15 17:50:42 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/stdlib/eprintf.c: New file.
-	* libc/stdlib/Makefile.in (OFILES): Add eprintf.o.
-	(eprintf.o): New target.
-
-Thu Jun 13 16:44:32 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/cygwin32/crt0.c (__cygwin_crt0_bp): New global.
-	(mainCRTStartup): Do int3 if __cygwin_crt0_bp non-zero.
-
-Thu Jun 13 17:45:17 1996  Mike Meissner  <meissner@rtl.cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Add support for AIX and Windows
-	NT in PowerPC endianess cases.
-
-Tue Jun 11 12:26:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Clean up PowerPC endianess.
-
-Thu Jun  6 11:34:20 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/string/strtok.c: Fix doc typo.
-
-Mon Jun  3 11:30:00 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/include/sys/reent.h (struct _reent): Removed _asctime,
- 	_next, _scanpoint, _signgam fields.
-
-	* libc/include/stdlib.h (rand_r): Added new declaration.
-	(_rand_r, _srand_r): Removed declarations.
-	* libc/stdlib/rand.c (_rand_r, _srand_r): Removed, these functions
- 	have been made obsolete by rand_r.
-	* libc/stdlib/rand_r.c: New file, rand_r function as specified
- 	by POSIX.1c.
-	
-	* libc/string/strtok.c: Update documentation to describe
- 	strtok_r().
-
-Sat Jun  1 23:50:39 1996  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/sys/stat.h (stat structure): Use the expanded stat
-	structure on Solaris, and PowerPC systems even though __svr4__ is
-	defined.
-
-Tue May 28 13:02:42 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/go32/sys/errno.h (ENOSYS,ESPIPE): Keep values <= 255.
-
-Fri May 17 10:34:44 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* host/any: Use ../.. rather than .. to get to the main build
- 	directory.  This matches the current layout of the build
- 	directory.
-
-Wed May 15 15:52:27 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/machine/h8300/__main.S: Delete.  No longer needed.
-	* libc/machine/h8300/Makefile.in: Corresponding changes.
-	* libc/sys/h8300hms/crt1.c: New file.
-	* libc/sys/h8300hms/Makefile.in: Corresponding changes.
-	* libc/sys/h8300hms/crt0.s: Call __main.
-
-	* libc/sys/h8300hms/crt0.S: Use temporary label names
-	for branch targets.
-
-Mon May 13 14:26:30 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/stdio/fopen.c (_fopen_r): Fix arguments to fseek.
-
-Fri May  3 16:38:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/reent/impure.c (_impure_ptr): Force the impure pointer into
-	.sdata on the PowerPC so that we can link newlib with code
-	compiled with -msdata.
-
-Mon Apr 29 21:38:02 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/arm/syscalls.c (_sbrk): Rename end to __end__.
-
-Thu Apr 25 06:38:59 1996  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/sys/cygwin32/crt0.c (mainCRTStartup): On PowerPC, set the
-	exception handler to __cygwin_exception_handler.
-
-Tue Apr 23 15:14:20 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/machine/setjmp.h: Check _AM29K, not ___AM29K__.
-
-Sun Apr 21 12:11:51 1996  Doug Evans  <dje@blues.cygnus.com>
-
-	* libm/math/Makefile.in ({w,wf}_cabs.o,{w,wf}_drem.o): Add rule for
-	SunOS VPATH.
-	* libc/stdlib/Makefile.in (atoff.o,atol.o,mblen.o,mbstowcs.o,
-	wcstombs.o): Likewise.
-
-Thu Apr 18 12:37:01 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/stdlib/environ.c (initial_env): New static local.
-	(environ): Point to `initial_env'.
-
-	* libc/include/machine/setjmp.h: Clean up.
-	(__H8300H__,__PPC__): Define _JBTYPE.
-	(__arm__): Provide entry for.
-	(sigjmp_buf): Delete.
-	(jmp_buf): Use _JBTYPE if defined, otherwise int.
-
-Thu Apr 18 12:10:52 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/machine/h8300/strcmp.S: Sign extend the result to
-	32bits so we don't lose with -mint32.
-
-Sun Apr 14 19:59:52 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/go32/sys/errno.h: New file.
-	* libc/sys/go32/Makefile.in (stat.o): Depend on stat.c.
-	* libc/sys/go32/gerrno.s (syscall_error): Call __errno to get
-	errno's address (make compatible with rest of newlib).
-	* libc/sys/go32/stat.c (fixinode): Set errno upon failure.
-	* libc/string/strerror.c (strerror): Surround each case with #ifdef.
-
-Thu Mar 28 13:44:42 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/sparc/{scan.c,shuffle.c}: New files.
-	* libc/machine/sparc/Makefile.in: Build them.
-	* libc/machine/sparc/machine/sparclet.h: New file.
-
-Mon Mar 25 15:29:14 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/machine/sh/asm.h: New file.
-	* libc/machine/sh/setjmp.S: Only save clobbered registers.  Added
- 	support for SH3e's FP registers.  Use asm.h.
-
-Mon Mar 25 11:59:23 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/stdio/vfprintf.c (cvt): Accept a reent structure
-	as first argument.  Call _dtoa_r and pass the reent structure
-	instead of calling __dtoa.
-
-Fri Mar 22 13:59:37 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* libc/include/sys/config.h: Define DOUBLE_IS_32BITS for
-	the h8300, h8500, and others.  Add comments for some rather
-	dubious code.
-
-Thu Mar 14 18:04:43 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Makefile.in (check): Check that testsuite exists before cd.
-
-Tue Mar 12 11:46:47 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/string.h (strsep): Correct prototype.
-
-Mon Mar 11 09:55:19 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* libc/sys/h8300/_exit.c (_exit,__exit): Set r0 to 0 before `sleep'.
-	* libc/sys/h8300/misc.c (_kill): Set r0 to indicate abort and `sleep'.
-	* libc/sys/h8300/crt0.S (_start): Call exit instead of `sleep'.
-
-Wed Mar  6 11:51:55 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* libc/posix/{creat.c,isatty.c}: New files.
-	* libc/posix/Makefile.in (OFILES): Add creat.o, isatty.o.
-
-	* libc/sys/sparc64/crt0.S (environ): Delete.
-	(.LHaveBias): Renamed from HaveBias.
-
-Thu Feb 15 10:48:37 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* libc/stdlib/mallocr.c (etext): Move decl inside ifdef WARN_VLIMIT.
-	(_morecore_r): Delete SBRK_IS_ALLOC support.
-
-Tue Feb 13 09:44:09 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/sys/cygwin32/Makefile.in (lib.a): Make lib.a with a dummy
-	module rather than touch, so we don't get warning messages when
-	all of the libraries are combined into libc.a.
-
-Tue Feb 13 06:32:07 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* libc/sys/sparclite/{Makefile.in,crt0.s}: Deleted.
-	crt0.s replaced by version in libgloss.
-
-Mon Feb  5 15:17:51 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/reent/Makefile.in (OFILES): Add impure.o.
-	* libc/reent/impure.o: New file, define initial reentrancy struct.
-	* libc/reent/reent.c: Remove above definition.
-
-	* libm/math/sf_asinh.c: Fix typo.
-
-	* Makefile.in (MATHOBJS_IN_LIBC): Removed sr_ldexp.o and
- 	srf_ldexp.o.
-	
-	* libm/libm.texinfo: Change documentation to reflect changes
-	in reentrancy model.
-	* libm/math/w_gamma.c: Likewise.
-
-Wed Jan 31 18:49:45 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* configure.in (*-*-cygwin32): New.
-	(*-*-win32): Deleted.
-	* libc/sys/win32 renamed libc/sys/cygwin32.
-
-Tue Jan 30 22:09:03 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/include/sys/file.h: New include file.
-
-Fri Jan 26 15:52:54 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/machine/setjmp.h: Increase size of PPC jmp_buf.
-
-Tue Jan 23 17:49:16 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/sys/wait.h (WIFSIGNALED): Fix.
-
-Tue Jan 16 09:28:10 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* doc/makedoc.c (realloc): Declare at file scope.
-	(catchar): Not here.
-
-Wed Dec 27 15:45:23 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* Makefile.in (VERSION): Update to 1.7.0.
-	* {libc,libm}/Makefile.in (VERSION): Likewise.
-	* configure.in: Minor clean up of multilib stuff.
-
-	From David Johnson <davidj@ICSI.Berkeley.EDU>
-	* {libc,libm}/Makefile.in (lib[cm].a): Delete library first.
-
-	* libc/stdlib/environ.c: New file.
-	* libc/stdlib/Makefile.in (OFILES): Build it.
-	* libc/sys/h8500hms/crt0.c (environ): Deleted.
-	* libc/sys/m88kbug/crt0.c (environ): Deleted.
-	* libc/sys/z8ksim/crt0.c (environ): Deleted.
-	* libc/sys/netware/environ.c: Deleted.
-
-Tue Dec 19 15:24:46 1995  Kim Knuttila  <krk@cygnus.com>
-
-	* configure.in (links): set sys_dir, posix_dir, syscall_dir
-
-Wed Dec 13 04:16:25 1995  Michael Meissner  <meissner@wogglebug.tiac.net>
-
-	* doc/makedoc.c (init_string_with_size,nextword): Move malloc
-	declaration out to external scope and declare it PTR, not char *.
-
-Mon Dec 11 17:35:12 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/sys/unistd.h (getpagesize): New declaration.
-	(_SC_PAGESIZE): New definition.
-	* libc/include/time.h (CLK_TCK): Defined as CLOCKS_PER_SEC.
-	* libc/configure.in (i[345]86-*-win32): Remove -DNO_FORK.
-
-Fri Dec  1 16:48:46 1995  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* libc/sys/vr4300/syscalls.c (sbrk): Fixed memory
- 	addressing. System call returns size, not (last address + 1).
-
-Thu Nov 30 15:05:26 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libm/math/*.c: Removed _foo_r() reentrancy API.
-	* libc/include/math.h: Removed _foo_r prototypes and macros.
-
-	* libm/math/*.c: On systems with IEEE single precision "doubles" 
-	move foo() -> foof() wrapper code from the files that implement
-	the standard IEEE double precision functions to the files that 
-	implement IEEE single precision functions. (ie. On those systems
-	sin is moved from s_sin.c to sf_sin.c).  There should eventually
-	be use of a C extension (like gcc's alias attribute) so that the
-	wrappers are not needed at all.
-
-	* libc/sys/sysnec810/sbrk.c: Cast &end to char * to get around
- 	strict NEC V810 compiler.
-	* libc/misc/dprintf.c (getnumber): Cast char * to unsigned char *
- 	for same reason.
-
-Wed Nov 29 14:25:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/strtol.c (_strtol_r): Replaced with implementation
- 	from NetBSD C library.
-	* libc/stdlib/strtoul.c (_strtoul_r): Likewise.
-
-	* libc/stdlib/assert.c (__assert): Renamed from __assertfail 
-	and adapted from implementation I wrote for NetBSD C library.
-	The difference is __assert doesn't take a format argument,
-	so that there won't be multiple copies of the same string
-	constant in the executable if assertions are enabled in
- 	more than one source module.
-	* libc/include/assert.h (assert): Changed to call __assert.
-
-Tue Nov 28 16:54:26 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/strtod.c (_strtod_r): Changed to not assign to
-	word1 on systems with 32 bit doubles.
-	* libc/stdlib/qsort.c (qsort): Cast some void *'s to char *'s
-	so that	we can do arithmetic on them.
-	* libc/misc/dprintf.c: Changed to support stdarg.h for ANSI
- 	compilers.
-	
-Tue Nov 28 16:03:32 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/arm/crt0.S: Zero bss.
-
-Fri Nov 24 16:09:23 1995  Doug Evans  <dje@deneb.cygnus.com>
-
-	* libc/include/unctrl.h: New file.
-	* libc/misc/{Makefile.in,dprintf.c,unctrl.c,misc.tex}: New files.
-	* configure.in (subdirs): Add libc/misc.
-	* libc/Makefile.in (SUBDIRS): Add misc.
-	(SUBLIBS): Add misc/lib.a.
-
-	* libc/include/sys/reent.h (struct _reent): Make __sf last member.
-
-Wed Nov 22 19:49:47 1995  Doug Evans  <dje@deneb.cygnus.com>
-
-	* libc/stdio/vfprintf.c (__sbprintf): Init fake._data.
-	(_vfprintf_r): Call CHECK_INIT.
-
-Tue Nov 14 02:52:12 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* Makefile.in (MULTITOP): Delete.
-	(MULTISRCTOP, MULTIBUILDTOP): Add.
-	* configure.in: Delete call to cfg-ml-com.in.  Call config-ml.in
-	instead of cfg-ml-pos.in.
-
-Wed Nov  8 01:24:08 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
-
-	* libc/sys/vr4300/syscalls.c: Added clean version of sbrk().
-	* libc/sys/vr4300/crt0.S: Cleaned up. Added check for FPU
- 	presence.
-
-Thu Nov  2 22:25:06 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* libc/string/strtok.c: Include string.h to pick up strtok_r
-	prototype.
-
-Wed Nov  1 18:54:11 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/string/strtok.c: include <_ansi.h>.
-	* libc/time/asctime_r.c: `reresult' -> `result'.
-
-Wed Nov  1 14:35:52 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/time/{ctime.c, gmtime.c, lcltime.c}: Wrap functions
-	in #ifndef _REENT_ONLY ... #endif conditional.
-
-	* libc/include/string.h (_strtok_r): Remove declaration.
-	* libc/include/time.h (_asctime_r): Remove declaration.
-	* libc/string/strtok.c (_strtok_r): Removed.
-	* libc/time/asctime.c (_asctime_r): Removed.
-
-	* libc/string/Makefile.in (OFILES): Add new object.
-	* libc/string/strtok_r.c: New file.  strtok_r function as
- 	specified by POSIX.1c, adapted from strtok implementation 
-	from NetBSD C library.
-	* libc/string/strtok.c (strtok): Reimplemented in terms of 
-	strtok_r.
-
-	* libc/time/Makefile.in (OFILES): Add new objects.
-	* libc/time/{asctime_r.c, ctime_r.c, gmtime_r.c, lcltime_r.c}:
-	New files, reentrant time functions specified by POSIX.1c.
-	* libc/time/{asctime.c, ctime.c, gmtime.c, lcltime.c}: Non-
-	reentrant time functions re-written in terms of reentrant 
-	functions.
-	* libc/time/lcltime.c: Renamed from localtime.c
-
-	* libc/include/time.h: Add prototypes for asctime_r, ctime_r,
-	gmtime_r, and localtime_r.
-
-Sat Oct 28 14:34:31 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/crt0.c (mainCRTStartup): Call cygwin_crt0.
-	* libc/include/sys/unistd.h (getlogin): Revert change of
-	Oct 19.
-	* libc/include/sys/signal.h (sigprocmask): Change prototype
-	so it compiles with c++.
-
-Wed Oct 25 15:43:18 1995  Michael Meissner  <meissner@cygnus.com>
-
-	* libc/include/machine/setjmp.h (PowerPC _JBLEN): Consider it a
-	PowerPC if __PPC__ is defined.  Bump jump_buf length to 62 ints,
-	to give some room in case we need to align the jmp_buf.
-	
-	* libc/machine/powerpc/setjmp.S (setjmp, longjmp): Rewrite to use
-	the new ppc-asm.h include file the compiler provides to specify
-	function prologue/epilogue.  Eliminate saves of the xer and ctr
-	registers, which are volatile.  Before starting to save registers,
-	align to 8 byte boundary.
-
-Mon Oct 23 11:20:51 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
-
-	* libc/sys/vr4300/syscalls.c: Added empty kill() function,
- 	referenced by standard libraries.
-
-Thu Oct 19 21:39:47 1995  Fred Fish  <fnf@cygnus.com>
-	
-	* libc/unix/Makefile.in, libc/string/Makefile.in,
-	libc/stdio/Makefile.in, libc/reent/Makefile.in,
-	libc/posix/Makefile.in:
-	Remove tabs from otherwise empty line.  Confuses some
-	older non-GNU versions of "make".
-
-Thu Oct 19 16:32:17 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/unistd.h (getlogin): Returns const char *.
-
-Wed Oct 18 12:57:50 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/fcntl.h (O_BINARY, O_TEXT): New.
-	* libc/include/errno.h: Moved into and include...
-	* libc/include/sys/errno.h: New file.
-	* libc/include/sys/wait.h: New file.
-	* libc/stdio/rename.c (_rename_r): Use _rename system call if available.
-	* libc/sys/win32/*: Moved out.
-	* libc/sys/win32/crt0.c: Rewritten to cope with shared library.
-	* configure.in (i[345]86-*-win32): HAVE_RENAME
-
-Wed Oct 18 09:58:27 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>
-
-	* libc/unix/sigset.c (sigemptyset, sigaddset): Prefix #undef to
-	avoid macro expansion for these two names.
-
-Tue Oct 17 08:45:33 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/h8500/psi.S: r6 renamed to fp.
-
-Sun Oct 15 12:58:10 1995  Michael Meissner  <meissner@wogglebug.tiac.net>
-
-	* configure.in (powerpc*): No longer need to define
-	NO_LONGLONG_POINTERS to supress warnings.
-
-Sat Oct 14 12:55:08 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
-
-	* libc/reent/reent.c (_reclaim_reent): Call cleanup indirectly
-	through PTR instead of directly.
-
-	* libc/sys/sh/crt0.S: Clean up formatting.  Delete unused
-	non-standard constructor support.
-
-Thu Oct 12 11:39:42 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/dtoa.c (_dtoa_r): Set result pointer to the
- 	address of the Bigint instead of the address of its _x field,
- 	as the size the result buffer was calculated accordingly.  
-	Fix from Jim Wilson <wilson@chestnut@cygnus.com>.
-
-	* libc/stdlib/{div.c, ldiv.c}: Replaced with implementation
-	from NetBSD C library.  No longer special cases division by 
-	zero (which needs to be done by the application anyway), but
-	it doesn't need to call abs() (or labs()) four times either.
-	
-	* libc/stdlib/qsort.c: Replaced with implementation from 
-	NetBSD C library.
-
-Tue Oct 10 14:01:10 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdio/vfprintf.c: Replaced with implementation from
-        NetBSD C library (which is derived from the 4.4BSD C library).
-	* libc/stdio/cvt.c: Removed.
-	* libc/stdio/Makefile: Updated.
-	
-Tue Oct 10 12:15:23 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/syscalls.c (rename): New.
-	* libc/sys/win32/include/winkernel.h (MoveFileExA): New.
-
-Fri Oct  6 12:18:43 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
-
-	* libc/machine/sh/Makefile.in (setjmp.o): Depend on setjmp.S.
-	* libc/machine/sh/setjmp.S: Rename from setjmp.s.
-
-	* libc/sys/sh/Makefile.in (OFILES, all): Delete setjmp.o.
-	(setjmp.o): Delete rule to build setjmp.o.
-	* libc/sys/sh/setjmp.S: Delete file.
-
-Fri Oct  6 11:19:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/mprec.c (d2b): Added support for _DOUBLE_IS_32BITS.
-	* libc/stdlib/mprec.h: Fixed constants used for IEEE single float
-	format.  Added #defines to map d2b, i2b, low0bits, lshift, mult,
- 	pow5mult and s2b to identifiers with leading underscores.
-	* libc/stdlib/Makefile.in: Add mprec.h as a dependency to dtoa.o,
-	ecvtbuf.o, mprec.o and strtod.o.  Sort dependencies.
-
-Thu Oct  5 17:27:30 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/posix/popen.c (sys/types.h): Include.
-
-Thu Oct  5 16:33:01 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/syscalls.h (fhandler): New struct.
-	(__lookup_fhandler, __lookup_fhandler_hook): Declare.
-	(__fhandler_normal): Declare.
-	(hinfo): New member op_handlers.
-	* libc/sys/win32/syscalls.c (__read): Don't validate fd.
-	(__write): Likewise.
-	(_read, _write, _open, _close, _lseek): Validate fd here.
-	Move file type specific stuff to foo_normal.
-	(read_normal, write_normal, open_normal, close_normal, lseek_normal):
-	New functions.
-	(__lookup_fhandler): New function.
-	(__lookup_fhandler_hook, __fhandler_normal): New variables.
-
-	From anders.blomdell@control.lth.se (Anders Blomdell)
-	* libc/sys/win32/crt0.c (vfork_init): Unset __FD_TABLE__.
-	Don't touch standard handles.
-	* libc/sys/win32/spawn.c (_spawn): Use STARTF_USESTDHANDLES.
-	(_execve): Only create __FD_TABLE__ if necessary.
-	* libc/sys/win32/include/winkernel.h (STARTF_*): Define.
-
-Thu Oct  5 14:25:14 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/sys/termios.h (FLUSHO): New.
-	* libc/sys/win32/include/win*.h: Moved a load of prototypes around.
-	* libc/sys/win32/pipe.c (_fctnl): Ignore F_SETFL without errors.
-	* libc/sys/win32/exception.c (ehandler3): set strace when a signal
-	without a handler is received.
-	* libc/sys/win32/Makefile.in: Remove --nodelete.
-	* libc/sys/win32/resouce.c (gettimeofday): New.
-	* libc/sys/win32/syscalls.c (path_to_real_path): New.
-	* libc/sys/win32/syscalls.h (include/wincon.h): Don't include.
-
-Wed Oct  4 13:10:35 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/dirsearch.c (opendir): stat real path name.
-	Don't append "/*" to search pattern if trailing '/' already there,
-	append "*".
-	* libc/sys/win32/spawn.c (_spawn): CreateProcess doesn't seem to
-	like /'s, convert them to \'s.  Handle //<drive>/ path names.
-	Add space for quoted \'s in arg string.  Print translated prog name
-	and original prog name.
-	(_execve): Handle parent doing exec a teensy bit better.
-	* libc/sys/win32/syscalls.h (__path_to_real_path): Update prototype.
-	* libc/sys/win32/syscalls.c (__path_to_real_path): Don't assume
-	path needs conversion, handle both cases.  Delete `const' from result.
-	(hash_path_name): New function.
-	(_open): Call it.
-	(_stat): Likewise.  Fill in more fields for directories.
-	* libc/sys/win32/wait.c (_wait): Explicitly pass -1 to waitpid.
-	(wait_for_any): Fix trace message.
-	(waitpid): Explicitly test for intpid == 0.
-
-	From anders.blomdell@control.lth.se (Anders Blomdell)
-	* libc/sys/win32/spawn.c (__vfork_get_empty_entry): zero fill result
-	so `next' is valid.
-
-Sat Sep 30 15:00:15 1995  Jason Molenda  (crash@phyeaux.cygnus.com)
-
-	* libc/sys/win32/spawn.c (_spawn): Make quoting rules more
-	complicated.
-
-Sat Sep 30 10:25:57 1995  Jason Molenda    (crash@phydeaux.cygnus.com)
-
-        * libc/include/_ansi.h: set _HAVE_STDC if __STDC__ is defined
-        at all, not just == 1.
-        * libm/math/wf_acos.c (acosf): check for _HAVE_STDC, not __STDC__.
-
-Sat Sep 30 04:30:09 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
-
-        * libc/sys/win32/include/winbase.h: include <wintypes.h> and <winnt.h>
-        * libc/sys/win32/include/wintypes.h: include <winnt.h>
-        * libc/sys/win32/include/winnt.h: avoid multiple inclusion of this
-        file.
-
-Fri Sep 29 01:49:17 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/syscalls.c (getcwd): Fix off by one error.
-
-	* libc/sys/signal.c (sleep): Fill it in.
-	* libc/sys/termios.c (tcflush): Use PurgeComm
-	(tcsetattr): Set some more of the bits.
-	* libc/sys/include/winkernel.h: Add PurgeComm and Sleep.
-
-Fri Sep 29 04:33:53 1995  Doug Evans  <dje@deneb.cygnus.com>
-
-	* libc/sys/arm/crt0.S (fp): Initialize to 0.
-	Conditionally include .idata$3 stuff ifdef __pe__.
-
-Fri Sep 29 01:49:17 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/crt0.c (hmap_init): Call __init_hinfo.
-	* libc/sys/win32/pipe.c (pipe): Ditto.
-	* libc/sys/win32/syscalls.c (__read):  Use new vtime and vmin fields.
-	* libc/sys/win32/syscalls.h (hinfo): vtime, vmin are new.
-	* libc/sys/win32/termios.c (tcsetattr): Init new fields.
-	(tcgetattr): Contents are new.
-	* libc/sys/win32/include/winkernel.h (DCB): New.
-	(GetCommState, SetCommState): New.
-
-Thu Sep 28 16:29:09 1995  Doug Evans  <dje@deneb.cygnus.com>
-
-	* libc/sys/arm/crt0.S (_start): Define.
-
-Thu Sep 28 12:26:45 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/arm/crt0.S: Move stack to top of RAM on PIE board.
-	* libc/sys/arm/syscalls.c (_read, _write): Use the SWI properly.
-
-	* libc/sys/win32/sysconf.c: New
-	* libc/sys/win32/sys/winadvapi.h: New
-	* libc/sys/win32/syscalls.h (hinfo): Added timeout_len, w_binary, r_binary.
-	* libc/sys/win32/crt0.c (hmap_init): Initialize new fields.
-	* libc/sys/win32/pipe.c (pipe): Ditto.
-	* libc/sys/win32/signal.c (_raise): New.
-	(_kill): Moved from spawn.c
-	* libc/sys/win32/spawn.c (kill): Moved to signal.c
-	* libc/sys/win32/syscalls.c (__read): Use new fields.
-	(_open): Ditto.
-	* libc/sys/win32/termios.c (tcflush, tcsetattr, tcgetattr): Fill in.
-	* libc/sys/win32/exceptions.c (__stack_trace): Keep going for longer.
-	* libc/include/sys/unistd.h (rmdir): Takes const path.
-	* libc/include/sys/stat.h (mkdir): Takes const path.
-	* libc/include/sys/signal.h (SIGTTOU, SIGTTIN): New for win32.
-
-Thu Sep 28 10:11:27 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/spawn.c (_spawn): Fix quoting.
-
-	Add support for specifying paths as //<drive>/foo/bar.
-	* libc/sys/win32/syscalls.h (__path_needs_conversion_p): Declare.
-	(__path_to_real_path): Declare.
-	(PATH_TO_REAL_PATH): New macro.
-	* libc/sys/win32/syscalls.c (__win32_pid_to_posix_pid): Minor cleanup.
-	(__path_needs_conversion_p, __path_to_real_path): New functions.
-	(_open): Fix test for error return from CreateFileA.
-	Handle new path syntax.
-	(_link, mkdir, rmdir, getcwd, chdir, stat): Handle new path syntax.
-	* libc/sys/win32/dirsearch.c (opendir): Likewise.
-
-Wed Sep 27 16:36:46 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/include/*.h: Reorganized
-	* libc/sys/win32/include/WINREADME: New.
-	* libc/sys/win32/Makefile.in (DLLS): Build version.a.
-	* libc/sys/win32/*.c: Fix for new include scheme.
-	* libc/sys/win32/crt0.c (__this_uinfo_buf, __this_uinfo): New.
-	* libc/sys/win32/getlogin.c (getlogin): Use uinfo.
-	* libc/sys/win32/passwd.c (*): Fix.
-	* libc/sys/win32/syscalls.c (get[e|][g|u]id): Use passwd info.
-	(_stat): Get directory owner and permissions right.
-	* libc/sys/win32/syscalls.h (uinfo): New.
-	* libc/sys/win32/version.def: Remove leading underscores.
-
-Tue Sep 26 18:18:47 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/key.c: include "include/wincon.h".
-
-Tue Sep 26 07:21:48 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/{key, stubs}.c: New.
-	* libc/sys/win32/Makefile: Adjust to cope.
-	* libc/sys/win32/crt0.c (vfork_init_first): Cope with -ve pids.
-	(environ_init): Change env names to upper case.
-	* libc/sys/win32/dirsearch.c (readdir): Don't fill in inode number.
-	* libc/sys/win32/passwd.c (*): Fill in the functions.
-	* libc/sys/win32/pipe.c (_fcntl): F_GETFL returns O_RDWR.
-	* libc/sys/win32/spawn.c (_spawn): Cope with -ve pids.
-	* libc/sys/win32/syscalls.c (__win32_pid_to_posix_pid): New function.
-	(_open): Initialze hmap->execable_p too.
-	* libc/sys/win32/syscalls.c (getuid, getgid, geteuid, getegid): Return from macros.
-	(_fstat): Fill in permissions.
-	* libc/sys/win32/syscalls.h (hinfo): Add execable_p.
-
-Fri Sep 22 13:47:27 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in (cfg-ml-com.in invocation): Use ${with_multilib_top}
-	if defined.
-	(cfg-ml-pos.in invocation): Likewise.
-
-Fri Sep 22 11:43:44 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* Makefile.in (MATHOBJS_IN_LIBC): Added s_isinf.o, sf_isinf.o,
-	s_isnan.o and sf_isnan.o.
-
-Wed Sep 20 14:50:19 1995  Ian Lance Taylor  <ian@cygnus.com>
-
-	* All Makefile.in files: added maintainer-clean target as a
-	synonym for realclean.
-
-Wed Sep 20 11:02:50 1995  Jeff Law  (law@snake.cs.utah.edu)
-
-	* libc/include/machine/setjmp.h: Add hppa support.
-	* libc/machine/hppa/setjmp.S: New file with setjmp/longjmp
-	support.
-	* libc/machine/hppa/Makefile.in: Related changes.
-
-Tue Sep 19 12:09:01 1995  J.T. Conklin  <jtc@blues.cygnus.com>
-
-	* configure.in (machine_dir): Don't set for v810-*-*.
-
-Fri Sep 15 20:22:08 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/crt0.c (passover): Change to handle MKS quoting
-	conventions correctly.
-
-Thu Sep 14 13:37:22 1995  J.T. Conklin  <jtc@blues.cygnus.com>
-
-	* libc/stdio/puts.c: Update documentation of return value to match
-	ANSI standard.
-
-Thu Sep 14 01:52:37 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	Fix file descriptor inheritance.
-	* libc/sys/win32/syscalls.h (CHILD_P): Define again.
-	(NOT_OPEN_FD): Fix.
-	* libc/sys/win32/spawn.c (vfork0): Only create inheritable handle if
-	close-on-exec flag not set.  Initialize child's entire fd table.
-	* libc/sys/win32/syscalls.c (_open): Only create inheritable handle if
-	CHILD_P.
-	* libc/sys/win32/pipe.c (pipe): Only create new handle as inheritable
-	if CHILD_P.  Initialize entire hmap entry.
-	(dup): Only create new handle as inheritable if CHILD_P.
-	(dup2): Likewise.  Properly initialize hmap entry.
-
-	* libc/sys/win32/spawn.c (_execve): Don't pass _P_SEARCH_PATH to
-	_spawn.
-	(_exit): Use CHILD_P.
-	* libc/sys/win32/syscalls.c (_fstat): Fix call to memset.
-	(_stat): Likewise.
-
-Mon Sep 11 23:09:39 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/crt0.c (passover): fix up the state table.
-	* libc/posix/popen.c: Added.
-	* libc/posix/Makefile.in: compile popen.c.
-	
-Mon Sep 11 11:43:38 1995  J.T. Conklin  <jtc@cygnus.com>
-
-	* libc/include/machine/ieeefp.h: On the h8/300, h8/300h and
-	h8/500 define _DOUBLE_IS_32BITS.
-
-Sat Sep  9 17:55:54 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	Get vfork/exec/spawn/cwait/wait working again.
-	* libc/sys/win32/syscalls.h (VFORK_NEWBORN_PSEUDO_PID): Define.
-	(procinfo): New member vfork_level.
-	* libc/sys/win32/crt0.c (__vfork_next_pid): Delete.
-	(vfork_init_first): Use GetCurrentProcessId to get pid.
-	Initialize vfork_level.
-	(vfork_init): Delete __PID__.
-	(environ_init): New function.  Undo patch of Aug 19, Posix says
-	environment variables are case sensitive.
-	(mainCRTStartup): Call it.
-	* libc/sys/win32/spawn.c (__vfork_next_pid): Delete.
-	(my_longjump: Make static.
-	(_spawn): New argument `h'.  Delete setting of __PID__.
-	Delete local `idx'.  Look for chars that need quotes, rather than
-	ones that don't.  Set handle of created process in `h'.
-	Result is process id if created task.
-	(allocate_spawn_entry): New function.
-	(spawnvp, spawnv): Call it.  Store handle and pid in procinfo entry.
-	(_execve): Set __FD_TABLE__ before spawning child.
-	Scan our fd table when passing fds, not our parent's.
-	Store handle and pid in procinfo entry.
-	(vfork0): Ensure strace message always printed.
-	Set child pid to VFORK_NEWBORN_PSEUDO_PID.
-	(vfork): Don't clobber result of vfork0.
-	* libc/sys/win32/wait.c (cwait): Fix non-error result (is pid).
-	(wait_for_any): Ignore processes in state FORK_STATE_VFORK_0.
-
-	* libc/sys/win32/syscalls.h (procinfo): New members `handle_valid_p'
-	and `exit_code'.
-	* libc/sys/win32/spawn.c (allocate_spawn_entry): Initialize them.
-	(vfork0): Likewise.  Distinguish children, grandchildren, etc. by
-	adding vfork level to pseudo-pid.  
-	(vfork1): If not root, set state back to FORK_STATE_VFORK_0.
-	(spawnvp, spawnv, _execve): Set handle_valid_p if success.
-	(_exit): If child, set exit code.
-	(__vfork_record_death): Only close process handle if valid.
-	* libc/sys/win32/wait.c (wait_for_single): Watch for children that
-	didn't exec.
-	(wait_for_any): Likewise.  Start scan after root entry.
-
-Fri Sep  8 18:48:02 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
-
-	* libc/include/sys/types.h (off_t): off_t back to 32 bits.
-	* libc/include/sys/_types.h (_off_t): _off_t back to 32 bits.
-	* libc/sys/win32/syscalls.c (_fstat): st_size is lower 32-bits
-	of actual file length.
-
-	* libc/sys/win32/sys/wait.h: include <sys/types.h>.
-	* libc/include/paths.h: _PATH_BSHELL added.
-	* libc/include/sys/unistd.h: define STDIN_FILENO, STDOUT_FILENO,
-	and STDERR_FILENO.
-
-Thu Sep  7 21:02:22 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
-
-	* libc/include/ar.h: Added.
-	* libc/include/sys/types.h: ino_t goes back to 32-bits.
-	* libc/sys/win32/syscalls.h (hinfo): added .namehash field.
-	* libc/sys/win32/syscalls.c (_open): compute .namehash based
-	on filename.
-	(_fstat): use .namehash for inode number of the fd.
-
-Thu Sep  7 12:57:19 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/{console,ioctl,pipe,spawn,syscalls,wait}.? (*):
-	 Change hinfo to __this_procinfo.
-	* libc/sys/win32/crt0.c: Remove procinfo_list.
-
-Wed Sep  6 18:38:26 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/include/sys/types.h (ino_t): Define ino_t correctly for
-	win32 environment.
-
-Wed Sep  6 18:09:29 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/include/grp.h: Removed.
-	* libc/sys/include/grp.h: Added.
-	* libc/sys/win32/grp.c: Include <grp.h>.
-
-Wed Sep  6 16:52:48 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/sys/signal.h (__need_MAX_SIGNALS): Removed.
-	(sigset_t, sigaction, SIG_SETMASK, SIG_BLOCK, SIG_UNBLOCK):
-	Defined for all but strict ANSI.
-	* libc/include/sys/reent.h (__need_MAX_SIGNALS): Removed.
-	* libc/include/machine/setjmp.h: Get win32 _JBLEN right.
-	* libc/signal/signal.c (_signal_r): Changed from using
-	_MAX_SIGNALS to NSIG.  
-	* libc/sys/win32/crt0.c (__current_pid, __parent_hmap, __child_hmap,
-	 __hmap): Deleted.
-	(__strace, __vfork_next_pid): New.
-	(__exe_suffix): Default to 1.
-	(passover, table): Understand quoted arguments.
-	(vfork_init_first): New.
-	(vfork_init): Initialize new process structure.
-	(mainCRTStartup): Pass environ to main.
-	* exceptions.c (__sig_mask): New
-	(ehandler3): Ignore signals in mask.
-	(really_exit): Remove CHILD_P test.
-	* pipe.c (pipe, dup, dup2): Use new process and file structure.
-	* resource.c (getrusage): Ditto.
-	* signal.c (sigprocmask): New.
-	* spawn.c (*): Rewritten.
-	* syscalls.c (*): Use new process and file structure.
-	(find_unused_handle): New.
-	* syscalls.h (MAX_HANDLES): Deleted.
-	(hinfo): Removed child_created_p.
-	(MAX_CHILDREN): Deleted.
-	(vfork_jmp_info, procinfo): New.
-	* wait.c (*): Mostly new.
-	* sys/strace.h (_STRACE_PARANOID): New.
-	* sys/param.h: New file.
-
-Wed Sep  6 17:03:53 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-        * libc/include/sys/stat.h: add S_BLKSIZE.
-        * libc/include/sys/_types.h: _off_t is a 64-bit type under win32.
-        * libc/include/sys/types.h: define off_t and ino_t to be 64 bit
-        types under win32.
-        (mode_t): add a #else to avoid multiple definitons.
-
-        * libc/sys/win32/Makefile.in: add grp.c.
-        * libc/sys/win32/grp.c: include grp.h correctly.
-        * libc/sys/win32/syscalls.c (_fstat): set almost all of the fields
-        of the st structure with real information.
-        * libc/sys/win32 (dirent): d_ino is of type ino_t.
-
-Wed Sep  6 10:41:34 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/include/sys/types.h (mode_t): Correct for svr4 sparc's
-	and (maybe) sparc64.
-	(nlink_t): Provide typedef.
-
-Tue Sep  5 18:46:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/grp.c: New file.
-	* libc/sys/win32/include/grp.h: New file.
-
-Tue Sep  5 13:47:27 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Added whitespace to make this
-	file easier to maintain.
-	On the sh, define either __IEEE_BIG_ENDIAN or __IEEE_LITTLE_ENDIAN
-	depending on the value of __LITTLE_ENDIAN__.
-	On the sh3e, define _DOUBLE_IS_32BITS.
-	
-Fri Sep  1 15:35:18 1995  James G. Smith  <jsmith@beauty.cygnus.com>
-
-	* libc/sys/vr4300/syscalls.c: Added missing support
- 	routines. _raise() and getpid().
-
-Fri Sep  1 14:12:48 1995  James G. Smith  <jsmith@rtl.cygnus.com>
-
-	* configure.in (mips*vr4300*-*-elf): Fixed silly mistake
-
-Fri Sep  1 08:42:11 1995  James G. Smith  <jsmith@beauty.cygnus.com>
-
-	* configure.in (mips*vr4300*-idt-*) Add support for RISQ monitor
-        and VR4300 processor.
-	* libc/sys/vr4300: Add directory.
-	* libc/sys/vr4300/{Makefile.in, crt0.S, syscalls.c}: Add SIM
- 	monitor run-time support.
-
-Thu Aug 31 09:16:52 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/Makefile.in (CHEWOUT_FILES): Removed atol.def.
-	* libc/stdlib/stdlib.tex: Don't include atol.def.
-
-Wed Aug 30 20:38:28 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/uname.c (uname): hardcode processor as `i386'.
-
-Wed Aug 30 10:48:08 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/ctype/Makefile.in: Fill in _to* dependencies.
-
-Tue Aug 29 17:14:29 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/{dirsearch.c,sys/dirent.h}: Fix namespace problems.
-	* libc/sys/win32/sys/dirent.h (struct dirent): Added d_ino.
-	* libc/sys/win32/strace.c (__sys_printf): Increase size of buffer.
-	* libc/sys/win32/smallprint.c (__small_vsprintf): Remove debug.
-	* libc/sys/win32/dirsearch.c (readdir): Set d_ino.
-
-Tue Aug 29 19:00:09 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/stdlib/atol.c (atol): DEFUN -> _DEFUN.
-
-Tue Aug 29 16:08:09 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/Makefile.in (OFILES): Added atoff.o and atol.o.
-	* libc/stdlib/atoff.c: New file.
-	* libc/stdlib/atof.c (atoff): Moved to atoff.c.
-	* libc/stdlib/atoi.c (atol): Removed.
-	* libc/stdlib/atol.c: Removed duplicate documentation.
-
-	* libc/include/ctype.h (_tolower, _toupper): Moved inside
-	#ifndef _STRICT_ANSI conditional.
-	* libc/ctype/Makefile.in (OFILES): Added _tolower.o and _toupper.o
-	* libc/ctype/_tolower.c: New file.
-	* libc/ctype/_toupper.c: New file.
-	* libc/ctype/tolower.c (_tolower): Moved to _tolower.c.
-	* libc/ctype/toupper.c (_toupper): Moved to _toupper.c.
-	* libc/ctype/toascii.c (_toascii): Removed.
-
-Tue Aug 29 12:17:32 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/sparc64/sys/types.h: Deleted.
-
-Mon Aug 28 22:06:08 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/uname.c (uname): change `Windows/NT' to `Windows_NT'
-	and recognize Windows_95 systems.
-
-Mon Aug 28 19:50:54 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/crt0.c (vfork_init, hmap_init): standard I/O fds
-	and passed fds should be opened in text mode.
-
-Mon Aug 28 18:51:22 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* libc/sys/win32/crt0.c (vfork_init): mark passed fds as used
-	in __hmap, set to binary mode by default.
-
-Tue Aug 22 14:12:37 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/sys/sh/syscalls.c: Updated all functions to call __trap34.
-	* libc/sys/sh/trap.S (__trap34): Renamed from __trap3.  Use trap
-	vector 34.
-
-Sat Aug 19 18:25:37 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* Makefile.in (install): Install all libraries found in the
-	top level.  If there's a sys/<type>/include directory,
-	install those headers into include.
-
-	* libc/sys/win32/kernel.def351: Delete
-	* libc/sys/win32/{comctl32.def, comdlg32.def, ctl3d32.def,
-	glaux.def, glu32.def, largeint.def, libc.def, libcmt.def,
-	lz32.def, mgmtapi.def, mpr.def, msacm32.def, msvcrt.def,
-	nddeapi.def, netapi32.def, odbc32.def, odbccp32.def, oldnames.def,
-	ole32.def, oleaut32.def, opengl32.def, rasapi32.def, rpcndr.def,
-	rpcns4.def, rpcrt4.def, scrnsave.def, shell32.def, snmp.def,
-	uuid.def, vdmdbg.def, version.def, vfw32.def, win32spl.def,
-	winmm.def, winspool.def, winstrm.def, wsock32.def}: New.
-
-	* libc/sys/win32/Makefile.in: Update for new files and new dlltool options.
-	* libc/sys/win32/crt0.c: Force all env names to upper case.
-	* libc/sys/win32/sys/win*.h -> libc/sys/win32/include
-	* libc/sys/win32/*.c: Headers have moved.
-	* libs/sys/win32/*.[ch]: Test for open_p rather than BAD_HANDLE,
-	__vfork_child_idx is now __vfork_child_ptr.
-
-	* posix/execvp (execvp): Don't crash if no PATH envname.
-
-Fri Aug 18 12:22:59 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/include/sys/reent.h (_Bigint): Removed _reclaim field.
-	* libc/reent/reent.c (_reclaim_reent): Free Bigint's by going
-	through the _freelist instead of through the _reclaim list.
-	* libc/stdlib/mprec.c (_Balloc): Don't put new node on _reclaim	list.
-	* libc/stdlib/mprec.c (_Bcopy): Make like version in master dtoa.c
-	sources.
-
-Thu Aug 17 11:03:27 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/machine/h8500/setjmp.S: New file.
-	* libc/include/machine/setjmp.h: Updated for H8/500.
-
-Wed Aug 16 16:19:11 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/syscalls.c (_open): More stracing.
-	(_stat): Open the file in O_BINARY.
-
-Wed Aug 16 15:49:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/machine/h8300/setjmp.S: New file.
-	* libc/include/machine/setjmp.h: Updated for H8/300 and H8/300H.
-
-Tue Aug 15 10:31:09 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/crt0.c (__exe_suffix): New global.
-	(mainCRTStartup): Set __exe_suffix from LIBC_EXE_SUFFIX.
-	* libc/sys/win32/spawn.c (_spawn): Add .exe suffix based on
-	__exe_suffix.  Free fd_tab after setting env variable.
-	(spawnv,_execve): Update.
-	* libc/sys/win32/syscalls.h (__exe_suffix): Declare.
-	* libc/sys/win32/smallprint.c (puts,putn): New (static) functions.
-	(__small_vfprintf): New function.
-	* libc/sys/win32/strace.c (__sys_printf): Call __small_vfprintf.
-	* libc/sys/win32/wait.c (cwait): Validate argument.
-
-	* libc/sys/win32/syscalls.c (queue_file_deletion): Add trace message.
-	(process_deletion_queue): Likewise.
-
-	* libc/sys/win32/Makefile.in (lib.a): Don't call $(RANLIB).
-
-Mon Aug 14 10:14:10 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32: Copyrights and gratuitous indenting.
-
-Mon Aug 14 01:32:58 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/syscalls.c (queue_file_deletion): Finish.
-	(process_deletion_queue): Likewise.
-	(__close_all_files): New function.
-	(_close): Only queue file deletion if really a file.
-	* libc/sys/win32/spawn.c (_spawn): Only ensure .exe suffix if
-	_P_APPEND_EXE.
-	(_exit): Call __close_all_files.
-
-	* libc/stdlib/system.c: #include <errno.h>.
-	(_system_r): Fix results in -DNO_EXEC case.
-
-	* libc/sys/win32/sys/dirent.h (DIR): New member __d_dirname.
-	Reorganize structure.
-	* libc/sys/win32/dirsearch.c (opendir): Use stat to determine
-	if argument is valid.  Save directory name in DIR.  malloc space
-	for dirent struct separately.
-	* libc/sys/win32/syscalls.c (stat): Fix test for directory.
-
-	* libc/include/errno.h (ENAMETOOLONG): Define.
-	* libc/string/strerror.c (strerror): Reword ENFILE.
-	Add ENOSYS, ENMFILE, ENOTEMPTY, ENAMETOOLONG.
-
-Sun Aug 13 22:42:25 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/crt0.c (__progname): New global.
-	(mainCRTStartup): Support strace=bitmask,filename.
-	* libc/sys/win32/dirsearch.c (all fns): Add trace messages.
-	* libc/sys/win32/syscalls.c (_write): Print parent trace message
-	if error.
-	(getcwd): Handle len too small.  Convert '\\' to '/'.
-	* libc/sys/win32/sys/fcntl.h (O_RDWR): = O_RDONLY|O_WRONLY.
-	Add prototypes for open, creat, fcntl.
-	(O_APPEND): Change value to conform to Microsoft's value.
-	* libc/sys/win32/sys/strace.h (_STRACE): Protect in do/while.
-
-	* libc/stdlib/getopt.c: New file.
-	* libc/stdlib/Makefile.in: Build it.
-
-Sat Aug 12 12:17:14 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/posix/execvp.c (execvp): Watch for DOS drives ifdef _WIN32.
-	Fix scanning of $PATH.
-	* libc/posix/exec*.c: Call _execve, not execve.
-	* libc/posix/execve.c: New file.
-	* libc/posix/Makefile.in (OFILES): Add execve.o.
-
-	* libc/sys/win32/sys/strace.h (_STRACE_ALL, _STRACE_UHOH,
-	_STRACE_STARTUP, _STRACE_SYSCALL): More bit masks of things to trace.
-	(_STRACE): If level==0, always print.  Handle new bit mask scheme.
-	* libc/sys/win32/crt0.c: Update _STRACE calls.
-	* libc/sys/win32/{pipe.c,resource.c,spawn.c,syscalls.c,wait.c}: Ditto.
-
-	* libc/sys/win32/smallprint.c (rn): Fix digit list.
-
-	* libc/sys/win32/syscalls.c (__really_exit): Move from here,
-	* libc/sys/win32/exceptions.c (really_exit): to here. Avoid recursion.
-	* libc/sys/win32/spawn.c (spawnvp): Pass `prog' as image name.
-	Print __seterrno trace message first.
-	(_execve): Renamed from execve.
-	(vfork): Update __strace usage.
-	(__vfork_child_pid): Deleted.
-	(__vfork_children, __vfork_child_idx): New globals.
-	(_spawnvp): New function.
-	(spawnvp, spawnv, _execve): Call _spawnvp.
-	(init_child): Record child in __vfork_children.
-	(__vfork_get_entry, __vfork_record_death): New functions.
-	* libc/sys/win32/crt0.c (mainCRTStartup): Initialize __vfork_children.
-	* libc/sys/win32/kernel32.def (WaitForMultipleObjects): Define.
-	* libc/sys/win32/syscalls.h (CHILD_P): New macro.  All files updated.
-	(MAX_CHILDREN, CHILD_INTERIM_PID): Define.
-	(children): New typedef.
-	(__vfork_children,__vfork_child_idx): Declare.
-	(__vfork_get_entry,__vfork_record_death): Declare.
-	* libc/sys/win32/wait.c (wait_for_single,wait_for_any): New functions.
-	(waitpid): Handle pid == -1.
-	* libc/sys/win32/sys/wintypes.h (WaitForMultipleObjects): Declare.
-	* configure.in (i386-win32): Add -DNO_FORK.
-	* libc/syscalls/sysfork.c (fork): Don't define for NO_FORK.
-	* libc/reent/execr.c (_fork_r): Likewise.
-	* libc/stdlib/system.c (do_system): New function.
-	If WIN32, try to get shell path from $SH_PATH, use vfork.
-	(_system_r): Return 1 for (s == NULL) if WIN32 or unix,
-	otherwise return 0.
-
-Sat Aug 12 11:08:00 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/stdlib/{mallocr.c, mstats.c}: Move mstats from mallocr to mstats.c.
-	* libc/sys/win32/fcntl.h: Don't include self.
-	* libc/sys/win32/sys/strace.h (_STRACE_WM, _strace_wm): New.
-	* libc/sys/win32/sys/winbase.h: (GetUserName) New.
-	* libc/sys/win32/sys/wincon.h (HANDLER_ROUTINE): Define correctly.
-	* libc/sys/win32/sys/wintypes.h (GetFileType, GetCurrentProcess, CloseHandle,
-	SetFilePointer, CreateFileA, GetFileInformationByHandle, GetStdHandle):
-	Correct prototypes.
-	* libc/sys/win32/strace.c: New file.
-	* libc/sys/win32/smallprint.c: New file.
-	* libc/sys/win32/crt0.c (func): Delete.
-	(mainCRTStartup): Fix alloca usage.  Set handles explictly.
-	* libc/sys/win32/dirsearch.c: Clean up handle usage, fix calls to __seterrno.
-	* libc/sys/win32/exceptions.c: Lint.
-	* libc/sys/win32/{ioctl.c, pipe.c, resource.c, spawn.c, cwait.c, syscalls.c}:
-	Clean up handle usage.
-	* libc/sys/win32/syscalls.c (__sys_printf): Moved into strace.c
-	(open.c): Default file type is text.
-	* libc/sys/win32/uname.c (uname): Use __small_sprintf.
-	* libc/sys/win32/advapi32.def: New	
-
-Fri Aug 11 17:11:52 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in (posix_dir, libc_posix_lib): New variables.
-	Define LIBC_POSIX_LIB in makefile to be $libc_posix_lib.
-	(i[345]86-*-win32): Define posix_dir.
-	Delete -DNO_EXEC.  Define -DHAVE_OPENDIR.
-	(if unix_dir): Fix typo.
-	* libc/posix/{Makefile.in,closedir,opendir,readdir,rewinddir,
-	scandir,seekdir,telldir}: New files.
-	* libc/posix/{execl.c,execle.c,execlp.c,execv.c,execvp.c}: Move here
-	from libc/unix.
-	* libc/Makefile.in (LIBC_POSIX_LIB): Define.
-	(SUBDIRS): Add posix.
-	(SUBLIBS): Add $(LIBC_POSIX_LIB).
-
-	* libc/include/sys/signal.h (SIGCHLD): Add for _WIN32.
-	(NSIG): Increase to 21.
-	* libc/include/sys/unistd.h (pid_t): Move from here,
-	* libc/include/sys/types.h (pid_t): to here.
-
-	* libc/sys/win32/syscalls.h: #include "sys/strace.h".
-	(__ptrace): Delete.
-	(hinfo): New members close_exec_p, child_created_p.
-	(struct exception_list): Define.
-	(__hmap): Redefine as pointer to table.
-	(__parent_hmap, __child_hmap): New globals.
-	(__set_errno, __really_exit): Declare.
-	(__vfork_child_pid): Declare.
-	* libc/sys/win32/crt0.c (__strace, __trace_file): New global.
-	(__orig_stdin, __orig_stdout, __orig_stderr): New globals.
-	(__parent_hmap, __child_hmap): New globals.
-	(__hmap): Redefine as pointer to active map.
-	(__get_console): New function.
-	(mainCRTStartup): Change leading '=' in environ vars to '!'.
-	(env __FD_TABLE__): Watch for this and initialize our fd/handle
-	mapping table from it if defined.
-	(argv, envp): Dump if __strace >= 4.
-	(main): Call here.
-	* libc/sys/win32/exceptions.c (myp): Redefine.
-	(__syscalls_b): Delete.
-	(__stack_trace): New function.
-	(ehandler3): Update to use _STRACE.  Print stack trace.
-	Call __really_exit instead of exit.
-	(init_exceptions): Delete args argc,argv.  New arg mine.
-	* libc/sys/win32/kernel32.def (CreatePipe, DuplicateHandle, FindClose,
-	FindFirstFileA, FindNextFileA, GetComputerNameA,
-	GetEnvironmentVariableA, ReadFile, SetEnvironmentVariableA): Define.
-	* libc/sys/win32/signal.c (signal): Validate arg.
-	(alarm, sleep): Define as stubs for now.
-	* libc/sys/win32/syscalls.c (all fns): Update to use _STRACE.
-	(__syscalls_b, errno): Delete.
-	(__vfork_child_pid, __vfork_jmp_buf): New globals.
-	(__seterrno): Handle more errors.
-	(__sys_printf): Renamed from _ptrace.
-	(__really_exit): New function.
-	(queue_file_deletion, process_deletion_queue): New functions.
-	(__resume_parent): New function.
-	(_unlink): Handle trying to delete open file.
-	(__totime_t): Renamed from totime_t.
-	(setsid, __read, __write): New functions.
-	(cwait, spawnvp, R, D, getrusage, _execve, _fork, _wait): Delete.
-	* libc/sys/win32/{dirsearch.c,getlogin.c,misc.c,resource.c,passwd.c,
-	times.c,spawn.c,pipe.c,wait.c,termios.c,ioctl.c,uname.c}: New files.
-	* libc/sys/win32/console.c: Update to new definition of __hmap.
-	* libc/sys/win32/Makefile.in: Build new files.
-	* libc/sys/win32/sys/{dirent.h,winerror.h,wait.h,termios.h}: New files.
-	* libc/sys/win32/sys/{ioctl.h,utsname.h}: New files.
-	* libc/sys/win32/sys/strace.h: Renamed from ptrace.h.
-	* libc/sys/win32/sys/wintypes.h (GetCurrentDirectoryA): Fix prototype.
-
-Thu Aug 10 16:32:52 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/h8500hms/misc.c (kill): Handle SIGABRT.
-
-Thu Aug 10 12:07:38 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/stdlib/{dtoa.c, strtod.c}: Merged assorted changes that
-	have been made to the master dtoa.c sources (from netlib.att.com)
-	since they were integrated into newlib in early 1992.  Fixes
-	problems with storage leaks and handling of numbers with very
-	negative exponents.
-	
-Wed Aug  9 14:18:39 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* Makefile.in (all): set rootpre and srcrootpre before calling
-	sub-makes.
-
-Tue Aug  8 17:20:45 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/crt0.c: Change __hmap usage.
-	* libc/sys/win32/exceptions.c: Use _ptrace call.
-	* libc/sys/win32/syscalls.c: Use _ptrace call.
-	(read, write): Cope with DOS style CRLF when in TEXT mode.
-	* libc/sys/win32/syscalls.h: Declare hinfo struct.
-	* libc/sys/win32/user32.def: Get DefWindowProc arg list right.
-	* libc/sys/win32/sys/fcntl.h, ptrace.h: New.
-	* libc/sys/win32/sys/windows.h: Fill in rest of messages.
-	* libc/sys/win32/sys/wintypes.h: Fix attribute syntax.
-
-Mon Aug  7 13:04:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/include/math.h (cabs, cabsf, drem, dremf): New declarations.
-
-	* libm/math/{w_cabs.c, wf_cabs.c, w_drem.c, wf_drem.c}: New files,
-	wrappers for hypot() and remainder() for BSD libm compatibility.
-	These are public domain implementations written by me for the
-	NetBSD libm some time ago.  Note cabs() is required by ucbtest.
-	* libm/math/Makefile.in (obj): Added w_cabs.o and w_drem.o.
-	(fobj): Added wf_cabs.o and wf_drem.o.
-
-Thu Aug  3 08:13:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/sys/h8500hms/misc.c: New file.
-	* libc/sys/h8500hms/Makefile.in (OFILES): Add misc.o.
-
-Wed Aug  2 16:46:27 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/time/localtime.c (localtime): Fix problem with leap year
-	handling.  Stole algorithm from Arthur David Olson's tz code.
-	
-Mon Jul 31 10:21:54 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* configure.in: (z8k-*sim): Renamed z8k-*-coff.
-
-	* libc/sys/z8ksim/glue.c (_getpid, _kill): New
-	(_exit): Use argument.
-
-Fri Jul 28 15:17:04 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/win32/sys/winbase.h (_WINBASE_H): Define.
-
-Wed Jul 26 16:24:19 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/sh/trap.S (perrno): Align correctly. (pr 7532)
-
-Mon Jul 24 13:42:52 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* configure.in (sparc*): Add -DMALLOC_ALIGNMENT=8 to
-	target_cflags.
-
-Mon Jul 24 11:42:07 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/win32/crt0.c (mainCRTStartup):  Look for
-	ptrace with case insensitivity
-	* libc/sys/win32/{user32.def, gdi32.def, exceptions.c, screen.c,
-	sys/winbase.h, 	sys/windows.h, sys/wintypes.h, sys/winuser.h}:
-	New files.
-
-Fri Jul 21 11:22:26 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* Makefile.in: Multilib support moved to ../cfg-ml-{com,pos}.in.
-	(MULTITOP, MULTIDIRS, MULTISUBDIR, MULTIDO, MULTICLEAN): New variables.
-	(all, install, *clean): Use new multilib support.
-	* configure.in: Multilib support moved to ../cfg-ml-{com,pos}.in.
-
-Fri Jul 21 07:11:42 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	* libc/include/sys/signal.h (__WIN32__): New.
-
-	* configure.in (i386-*-win32): Remobe SBRK_IS_ALLOC.
-
-	* libc/stdlib/mprec.c (Balloc): Fix trampling problem.
-	(ulp, b2d): Handle 32 bit doubles.
-	* libc/stdlib/mprec.h:  Handle 32 bit doubles.
-	* libc/stdlib/strtod.c (_strtod_r): Ditto.
-
-Fri Jul 14 08:24:58 1995  steve chamberlain  <sac@slash.cygnus.com>
-
-	from medp@primag.co.uk:
-	* libc/stdio/setvbuf.c (setvbuf): Fix line buffering on
-	dynamically allocated buffers.
-
-Thu Jul 20 10:11:03 1995  Fred Fish  <fnf@fishbowl>
-
-	* libc/include/sys/unistd.h (_exit):  Add _ATTRIBUTE ((noreturn)).
-	* libc/stdlib/exit.c (unistd.h):  Include to pick up _exit() declaration.
-
-Thu Jul 20 10:16:25 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in (powerpc): Fix previous fix.
-
-Wed Jul 19 14:08:55 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in (powerpc-*eabiaix*): Update PowerPC multilib
-	directories for this target.
-
-Wed Jul 19 00:34:30 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
-
-	* configure.in (hppa): Add machine_dir definition.
-	* libc/machine/hppa: New directory with PA specific implementations
-	of the basic memory/string functions.
-
-Tue Jul 18 21:16:00 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure.in: Update current PowerPC multilib directories.
-	Split big and little endian configurations.
-
-Tue Jul 18 11:55:33 1995  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.in: Add --enable-single-float option to configure to
-	control use of MIPS single-float directories.  Default to yes.
-
-	* Makefile.in (all): Don't recurse into multilib directory if it
-	does not exist.
-
-Mon Jul 17 15:51:30 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/sys/sh/syscalls.c: Fix typo.
-
-Mon Jul  3 14:38:52 1995  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* Makefile.in, libc/Makefile.in, libc/sys/Makefile.in:
-	Pass down DLLTOOL.
-	* libc/include/process.h: Define WAIT_CHILD.
-	* libc/include/types.h: Get sizes right for win32.
-	* configure.in (i386-*-pe): Becomes i386-win32.
-	* libc/sys/win32/{crt0.c, kernel32.def, longjmp.c, setjmp.c, syscalls.c
-	wintypes.h,sys/file.h,sys/resource.h}: Second pass.
-	* libc/stdlib/mallocr.c: Don't round up memory block if SBRK_IS_ALLOC
-	is defined.
-
-Wed Jun 28 18:34:54 1995  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* configure.in (i[345]86-*-pe):  New target (NT).
-	* host/any: DLLTOOL new.
-	* libc/sys/win32/{crt0.c, kernel32.def, longjmp.c, setjmp.c, syscalls.c
-	wintypes.h,sys/file.h,sys/resource.h}: Preliminary support for
-	WIN32 (just enough to cross host the comp-tools).
-
-Thu Jun 22 11:45:18 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/machine/h8300/{cmpsi.S,ucmpsi.S,divhi3.S,mulhi3.S,mulsi3.S}:
-	Deleted.  These files live in gcc/config/h8300/lib1funcs.asm now.
-
-Mon Jun 19 11:40:40 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/include/machine/ieeefp.h (arm): Change to always be
-	__IEEE_BIG_ENDIAN (even on little endian ARM's).
-
-Thu Jun  8 14:22:28 1995  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* libc/sys/crt0.S: Initialze sp, and call exit after main.
-	* libc/sys/syscalls.c (abort): New.
-	* configure.in (arm): Define ABORT_PROVIDED.
-
-Wed Jun  7 14:04:35 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* configure.in (powerpc): Define multidirs.
-
-Mon Jun  5 16:10:13 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/arm/crt0.S: Add __USER_LABEL_PREFIX__ support.
-
-Thu Jun  1 10:51:47 1995  Sean Eric Fagan <sef@cygnus.com>
-
-	* configure.in (sparclite): Delete target_cflags.  Define multidirs.
-
-Wed May 24 14:23:25 1995  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* configure.in, libc/include/machine/ieeefp.h: Modified
-	for arm:
-	libc/machine/arm/*, libc/sys/arm/*: New
-
-Tue May 23 13:53:07 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libc/include/machine/ieeefp.h: Use __PPC__ instead of
-	  __powerpc__ when determining endianness.
-
-Wed May 10 07:55:56 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* configure.in (m68*): Add multidir for the m68332.
-
-	* host/any (CC): Fix typo in last change.
-
-Fri Apr 14 22:20:31 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
-
-	* libc/include/sys/config.h: Test __m68k__ instead of __m68000__
-	when determining endianness.
-	* libc/include/machine/ieeefp.h: Ditto.
-	* libc/machine/m68k/setjmp.S: Use '&' instead of '#' for immediate
-	operands.
-
-Fri Apr 14 14:14:29 1995  Doug Evans  <dje@chestnut.cygnus.com>
-
-	* libc/include/errno.h (ENOTEMPTY): Define.
-
-Thu Apr  6 12:21:20 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* configure.in (sparc-sun-sunos*): Add -DMALLOC_ALIGNMENT=8 to
-	  target_cflags.
-
-	* libc/sys/sun4/Makefile.in (COPYOFILES): Added rem.o, multiply.o,
-	  and umultiply.o.
-
-	* libc/stdio/tmpnam.c (worker): Unconditionally increment count
-	  instead of only when open succeeds.  ANSI requires that multiple
-	  calls to tmpnam() result in different files.
-
-	* libc/sys/sun4/Makefile.in (COPYRENAMEOFILES): New macro, list of
-	  objects pulled in from /lib/libc.a that must be renamed before
-	  being pulled into newlib.  /lib/libc.a's div.o conflicted with
-	  newlib's file with the same name.
-
-	* libc/stdlib/ldiv.c (ldiv): Call labs() instead of abs().
-
-	* host/any (CC, AS, AR, RANLIB): Changed so that executables in
-	  the build tree will only be used if the executables are present
-	  (instead of just the Makefiles).
-
-	* libc/include/stdlib.h (mblen, mbtowc, wctomb, mbstowcs,
-	  wcstombs): Define.
-	* libc/stdlib/{mblen.c, mbstowcs.c, wcstombs.c}: New files, null
-	  versions of these functions that I orignally wrote for the
-	  NetBSD C library.
-	* libc/stdlib/{mbtowc.c, wctomb.c}: Replaced functions with
-	  versions I wrote for NetBSD.
-
-Wed Mar 29 12:42:42 1995  Kung Hsu  <kung@mexican.cygnus.com>
-
-	* libc/sys/sparclite/Makefile.in: add crt0.s and make info.
-	* libc/sys/sparclite/crt0.s: ditto.
-
-Tue Mar 28 20:28:03 1995  Rob Savoye  <rob@rtl.cygnus.com>
-
-	* configure.in: Add soft-float for proelf.
-
-Mon Mar 27 12:07:56 1995  Steve Chamberlain  <sac@bang.hack.com>
-
-	* libc/stdlib/mprec.h (Bcopy): Copy the right number
-	of bytes.
-
-Mon Mar 27 11:24:22 1995  Doug Evans  <dje@chestnut.cygnus.com>
-
-	* Makefile.in (all): Depend on `force'.
-	* configure.in (syscall_dir): Renamed from fake_sys_dir.
-	(libc_syscall_lib): Renamed from libc_fake_sys_lib.
-	(LIBC_SYSCALL_LIB): Renamed from LIBC_FAKE_SYS_LIB.
-	* libc/Makefile.in: Likewise.
-	* libc/include/reent.h: Update syscall references.
-	(_fcntl_r): Add prototype.
-	* libc/syscalls/*.c #include <reent.h>.
-	(*) Call reentrant version if REENTRANT_SYSCALLS_PROVIDED.
-
-Mon Mar 20 16:57:39 1995  Doug Evans  <dje@deneb.cygnus.com>
-
-	* libc/include/sys/stat-dj.h (S_ISBLK): Define.
-	(S_ISCHR, S_ISDIR, S_ISFIFO, S_ISREG): Define.
-	* libc/include/sys/stat.h (stat-dj.h): Include ifdef MSDOS.
-	(time.h, sys/types.h): Always include (even if MSDOS).
-	(stat): Fix prototype.
-
-Fri Mar 10 11:30:38 1995  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.in (i[345]86-*-go32): Compile with -DNO_EXEC.
-
-Mon Feb 27 18:00:39 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
-
-	* libc/machine/h8500/psi.S (EXTPSIHI_RN_SN): Ifdef out.
-
-Mon Feb 13 16:10:03 1995  Ian Lance Taylor  <ian@cygnus.com>
-
-	* libc/include/regdef.h: New file.
-	* libc/machine/mips/machine/regdef.h: New file.
-
-Mon Feb  6 15:24:29 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/sys/sparc64/sys/fcntl.h (open): Add ellipsis.
-
-Fri Jan 27 13:52:10 1995  Steve Chamberlain  <sac@splat>
-
-	* libc/sys/sh/crt0.S: Pass main's return to exit.
-	* libc/sys/sh/trap.S: Put errno in the right place.
-
-Tue Jan 24 18:57:56 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* libm/math/e_rem_pio2.c (__ieee754_rem_pio2): Integrate change
-	from fdlibm 5.2: handle |x| < 3pi/4 more efficiently.
-	* libm/math/ef_rem_pio2.c: Likewise.
-	* libm/math/e_log10.c: Remove unused static one.
-	* libm/math/ef_log10.c: Likewise.
-	* libm/math/s_frexp.c: Likewise.
-	* libm/math/sf_frexp.c: Likewise.
-
-Sun Jan 22 21:26:14 1995  Steve Chamberlain  <sac@splat>
-
-	* libc/sys/go32/Makefile.in, clock.S, dir.c, setjmp.S, stat.c,
-	longjmp.S: Upgraded.
-	* libc/sys/go32/sys/setjmp.h: Upgraded.
-	* libc/sys/go32/sys/go32.h, dpmi.h: New files.
-
-Fri Jan 20 18:33:18 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* configure.in: Add many entries to multidirs for mips targets.
-
-Wed Jan 18 10:19:25 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* libm/math/e_jn.c (__ieee754_yn): Integrate change from fdlibm
-	  5.2 which fixes bug where jn(-1,x) is three times larger than
-	  the actual answer.
-	* libm/math/ef_jn.c (__ieee754_ynf): Likewise.
-
-Sun Jan 15 21:48:58 1995  Steve Chamberlain  <sac@splat>
-
-	* libc/sys/w65/sys/syscalls.h: New file
-	* libc/include/machine/ieeefp.h: W65 support.
-	* libc/include/sys/config.h: Ditto.
-	* libc/machine/w65/Makefile.in, cmpsi, divsi3, lshrhi.s, mulsi3.c,
-	sdivhi3.s, smulhi3.s, udivhi3.s, umodhi3.s: New files.
-	* libc/sys/w65/Makefile.in, crt0.c, syscalls.c, trap.c: New files.
-
-Wed Jan 11 15:59:01 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* libc/sys/Makefile.in (lib.a, crt0.o): Depend upon subs.
-
-Tue Jan  3 15:57:03 1995  Rob Savoye  <rob@darkstar.cygnus.com>
-
-	* Makefile.in, configure.in: Remove any references to the old
-	"stub" dir.
-
-Thu Dec 22 10:42:08 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* libc/syscalls/sysopen.c: Write _HAVE_STDC version of open, which
-	uses ... in prototype.
-
-
-Wed Nov 30 08:39:42 1994  Ian Lance Taylor  <ian@rtl.cygnus.com>
-
-	* libc/sys/a29khif/sys/libconfig.h: Remove.
-	* libc/sys/go32/sys/libconfig.h: Remove.
-	* libc/sys/sun4/sys/libconfig.h: Remove.
-	* libc/sys/sysvi386/sys/libconfig.h: Remove.
-	* libc/sys/sysvnecv70/sys/libconfig.h: Remove.
-	* libc/sys/sparc64/sys/libconfig.h: Remove.
-
-	* libc/include/_ansi.h (_FLOAT_ARG, _FLOAT_RET): Don't define.
-	* libc/include/sys/config.h (_FLOAT_ARG, _FLOAT_RET): Likewise.
-	* libc/include/math.h: Change all uses of _FLOAT_RET and
-	_FLOAT_ARG to float.
-	* libm/test/math.c: Likewise.
-	* testsuite/libm.sac/math.c: Likewise.
-	* testsuite/libm.sac/working/math.c: Likewise.
-
-Wed Nov 23 22:39:28 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
-
-	* libc/sys/sh/trap.s,crt0.s,setjmp.s: Renamed with .S so that
-	gcc calls gas with endian option.
-	* configure.in (sh): Build little endian version too.
-
-Wed Nov 16 18:21:45 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* configure.in: Configure big and little endian versions for MIPS
-	targets.
-
-Sat Nov 12 21:12:51 1994  Doug Evans  <dje@canuck.cygnus.com>
-
-	* libc/include/limits.h: Deleted.
-	* libc/include/machine/limits.h: Deleted.
-
-Thu Nov 10 15:32:44 1994  Rob Savoye  <rob@rtl.cygnus.com>
-
-	* ChangeLog: Remove stub directory. This has all been rewritten
-	and moved to devo/libgloss.
-
-Thu Sep 29 18:31:04 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* Makefile.in (dvi): Add to info target, use $@ in sub make.
-	(docs): Merge into info target.
-	* libm/Makefile.in (dvi): Add $(srcdir).
-	* libm/math/Makefile.in (chobjs): Remove underscores from file
-	names.  Texinfo doesn't like them.
-	(wacos.def, ...): Add explicit targets for all .def files.
-	* libm/math/math.tex: Remove underscores from @include file names.
-	* doc/Makefile.in (dvi): Add dummy target.
-	* testsuite/Makefile.in (dvi): Add dummy target.
-
-Mon Sep 26 21:17:46 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* Makefile.in (VERSION): Define.  For net newlib releases.
-
-Thu Sep 22 19:01:26 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* README: New file.
-
-Mon Sep 19 16:35:23 1994  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-	* libc/stdlib/ecvtbuf.c (_gcvt): Undo last change.
-
-Mon Sep 19 11:44:23 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* libc/stdlib/setenv.c (_findenv): Declare.
-
-	* libc/include/sys/fcntl.h: Fix declarations of open, creat, and
-	fcntl to not use _EXFUN, and change string parameters to open and
-	creat to be ``const char *''.
-	* libc/sys/sparc64/sys/fcntl.h: Likewise.
-	* libc/sys/sparc64/creat.c (creat): Make PATH const.
-	* libc/syscalls/sysopen.c: Include <fcntl.h>.
-	(open) Make _FILE const.
-	* libc/sys/z8ksim/glue.c (_open): Make BUF const.
-	(_creat): Make PATH const.
-	* libc/sys/h8300hms/syscalls.c (_open): Make PATH const.
-	* libc/sys/h8500hms/syscalls.c (_open): Likewise.
-	* libc/sys/m88kbug/syscalls.c (open): Likewise.
-	* libc/sys/sh/syscalls.c (_open): Likewise.
-	* stub/shared/glue.c (open): Make BUF const.
-	* stub/ex93x/syscalls.c (open): Make FILENAME const.
-
-Thu Sep  8 16:39:12 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
-
-	* libc/include/errno.h: Add ENMFILE
-	* libc/include/sys/config.h: Support Z8000.
-	* libc/include/sys/signal.h: New signals for go32.
-	* libc/machine/h8500/psi.S (__addpsir0r0): New function
-	* libc/machine/h8500/cmpsi.S (__ucmppsi2): New function
-	* libc/machine/sh/sdivsi3.s (__sdivsi3): Rewritten.
-	* libc/stdlib/mallocr.c (_morecore_r): Minimum chunk
-	size is variable, depending upon CHUNK_POWER.
-	* libc/sys/go32/*.c: Upgrade to new go32 stuff.
-
-Sun Sep  4 17:42:43 1994  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-	* libc/stdlib/ecvtbuf.c (_gcvt): Output '-' for negative numbers.
-
-Fri Sep  2 10:56:01 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* libc/include/_ansi.h (_PARAMS): Don't define if already defined.
-
-Wed Aug 24 11:11:03 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* configure.in: Change i[34]86 to i[345]86.
-
-	* libc/include/math.h: Don't define HUGE_VAL if it is already
-	defined.
-
-Wed Aug 17 15:18:02 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* testsuite/libm.sac/test_erfc.c: Correct some result values.
-	* testsuite/libm.sac/test_gammaf.c: Likewise.
-	* testsuite/libm.sac/test_sin.c: Likewise.
-	* testsuite/libm.sac/test_tanh.c: Likewise.
-
-Tue Aug 16 16:12:53 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Don't try set endianness if it is
-	already set.  Define typedefs __int32_t and __uint32_t.
-	* libc/include/math.h: Include <machine/ieeefp.h>.
-	(union __dmath): Use __uint32_t.
-	* libm/math/fdlibm.h, libm/math/*.c: Use __int32_t and __uint32_t
-	instead of int and unsigned int.
-
-Thu Aug 11 15:16:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	Replace the math library with the SunPRO fdlibm package.
-	* libm/math: Completely changed all files.
-	* libm/ieeefp: Remove contents and directory.
-	* libm/Makefile.in (LIBM_FP_LIB): Remove.
-	(SUBDIRS): Just set to math/lib.a.
-	* libm/libm.texinfo: Updated for new library.
-	* libc/include/math.h: Extensive changes for new math library.
-	* libc/include/ieeefp.h (isnanf, isinff, finitef): Change argument
-	from _FLOAT_ARG to float.
-	(maxpowtwo, maxpowtwof): Don't declare.
-	* configure.in (fp_dir): Removed; was always ieeefp anyhow.
-	(libm_fp_lib): Removed.
-	* Makefile.in (MATHOBJS_IN_LIBC): Updated with new file names.
-	* testsuite/libm.paranoia/Makefile.in (check): Correct --srcdir
-	argument to ${RUNTEST}.
-	* testsuite/libm.sac/Makefile.in (LOCAL_CFLAGS): Define.
-	(.c.o): New rule.
-	(RUNTESTFLAGS): Set CC and CFLAGS.
-	(TESTS): Remove test_log2 and test_log2f.
-	(${TESTS}): Pass ${LOCAL_CFLAGS}, not ${CFLAGS}.
-	* testsuite/libm.sac/math.c (run_vector_1): Use float, not
-	_FLOAT_ARG, for single precision argument type.
-	* testsuite/libm.sac/sac.exp: Treat an error in bit 63 as an
-	expected failure.  Close the input pipe.
-	* testsuite/libm.sac/test.c (test_sok, test_iok, test_scok):
-	Correct misspelling of inaccurate.
-	(test_mok): Use ``inaccurate'', not ``wrong''.
-	* testsuite/libm.sac/{test_acos.c, test_acosh.c, test_asin.c,
-	test_asinh.c, test_atan.c, test_atanh.c, test_ceil.c,
-	test_ceilf.c, test_cos.c, test_cosh.c, test_erf.c, test_erf.c,
-	test_fabs.c, test_floor.c, test_floorf.c, test_fmod.c,
-	test_fmodf.c, test_gamma.c, test_log1p.c, test_log1pf.c,
-	test_yn.c): Correct many result values.  Many are still wrong.
-
-	* libc/stdlib/ecvtbuf.c (print_e): If _dtoa_r sets decpt to 9999,
-	just copy the string.
-	(_gcvt): Always return the buffer.
-
-Tue Aug  9 13:43:23 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
-
-	* bcopy.c: fixed documentation, bcopy was not specified by ANSI.
-
-Wed Aug  3 05:39:41 1994  D. V. Henkel-Wallace  (gumby@cygnus.com)
-
-	* libc/include/sys/reent.h: (struct _Bigint): add _reclaim
-	structure.
-	(struct _reent): add _p5s, _cvtlen, _cvtbuf.
-	(_reclaim_reent): declare new entry point.
-	* libc/reent/reent.c (cleanup_glue, _reclaim_reent): new
-	functions.
-
-	* libc/stdlib/mprec.c (Balloc): Keep track of every struct bigint
-	ever allocated, so that we can later reclaim them all.
-	(pow5mult): make reentrant.
-
-	* libc/stdlib/ecvtbuf.c (fcvtbuf, ecvtbuf): extend these functions
-	so that when given NULL as a buffer, return a pointer to static
-	space in the rent structure.  This is not documented behaviour;
-	it's only to support ecvt and fcvt, which aren't ANSI anyway.
-	* libc/stdlib/efgcvt.c (fcvt, ecvt) Use new functionality (and
-	therefore become reentrant).
-	
-	* libc/stdlib/dtoastub.c: remove spurious inclusion of mprec.h.
-
-Mon Aug  1 16:52:24 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Check _AM29K, not ___AM29K__.
-
-Thu Jul 28 15:40:21 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
-
-	* Makefile.in: Make link to libg.a after libc.a; this is needed
-	  for the testsuites to build executables when everything comes
-	  from the tree.
-
-Mon Jun 27 17:14:29 1994  Bill Cox  (bill@rtl.cygnus.com)
-
-	* libc/Makefile.in: Add a VERSION variable so we can keep track.
-	* libm/Makefile.in: Add a VERSION variable so we can keep track.
-
-Wed Jun 22 10:26:00 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
-
-	* libc/include/stdio.h: Use __VALIST, not va_list.
-
-Tue May 17 15:43:28 1994  Bill Cox  (bill@rtl.cygnus.com)
-
-	* testsuite/config/unix-libm.exp, testsuite/lib/libm.exp,
-	testsuite/libm.sac/execute.exp:
-	  Replace error proc calls with perror calls.
-
-Wed May 11 09:25:28 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/*.h: #include "_ansi.h" instead of <_ansi.h>.
-	* libc/include/time.h: #define NULL as 0L.
-
-Mon May  9 18:41:20 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* host/any (INCLUDES): Delete -I of gcc/include, gcc -B takes
-	care of it.
-
-Mon May  9 18:39:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* libc/include/sys/signal.h: Check for __GO32__, not __i386__ and
-	not __unix__.
-
-Sat May  7 17:07:36 1994  Steve Chamberlain  (sac@cygnus.com)
-
-	* configure.in (TARGET_CFLAGS): Set -O2 as default.
-	(z8k-*-*): Use syscalls fake sys dir.
-	* libc/sys/z8k/glue.c: Rename syscalls.
-	* libc/sys/go32/Makefile.in: Use new routines.
-	* libc/machine/Makefile.in: Fix typo in ln stuff.
-
-Thu May  5 13:47:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* Makefile.in (libm.a, crt0.o): Use cp if ln fails.
-	* libc/Makefile.in (crt0.o): Likewise.
-	* libc/machine/Makefile.in (lib.a): Likewise.
-	* libc/sys/Makefile.in (lib.a, crt0.o): Likewise.
-
-	All Makefile.in files: Added mostlyclean, realclean and distclean
-	targets.
-
-	* Makefile.in: Don't bother to unexport XTRAFLAGS or
-	XTRAFLAGS_FOR_TARGET, since they are no longer passed down from
-	the top level Makefile.
-
-Tue Apr 26 15:10:34 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/sys/stat.h: New file.
-	* libc/sys/sparc64/sys/time.h: New file.
-	* libc/sys/sparc64/sys/types.h: New file.
-
-Fri Apr 22 12:58:24 1994  Stan Shebs  (shebs@andros.cygnus.com)
-
-	* stub/ex93x/crt0.s (start): Add code to clear bss.
-
-Wed Apr 13 10:34:58 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/sys/types.h (time_t): Properly protect inside
-	#ifndef __time_t_defined.
-
-	* libc/stdio/fileno.c: New file.
-	* libc/stdio/Makefile.in (OFILES, CHEWOUT_FILES): Add fileno.
-	(fileno.o): Add dependency.
-	* libc/include/stdio.h (__sgetc): Rename never to _never.
-	(fileno macro): Disable, needs to do CHECK_INIT first.
-
-Mon Apr 11 17:37:09 1994  Bill Cox  (bill@rtl.cygnus.com)
-
-	* testsuite/Makefile.in (EXPECT, RUNTEST): Set these for the check
-        goal.
-
-	* testsuite/Makefile.in (check): Set TCL_LIBRARY for runtest.
-	* testsuite/libm.paranoia/Makefile.in (check): Set TCL_LIBRARY for
-	runtest.
-	* testsuite/libm.sac/Makefile.in (check): Set TCL_LIBRARY for
-	runtest.
-
-Sat Apr  9 16:18:09 1994  Doug Evans  (dje@cygnus.com)
-
-	* libc/sys/sparc64/sys/fcntl.h: New file, define solaris versions
-	of the various constants.
-
-Thu Apr  7 21:19:07 1994  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/include/math.h: #ifndef __math_68881 around things which
-	conflict with the (gcc-provided) inline functions in
-	gcc/ginclude/math-68881.h.
-
-Thu Apr  7 02:50:43 1994  Doug Evans  (dje@cygnus.com)
-
-	* libc/include/_syslist.h (_gettimeofday): Define.
-	(_times): Ditto.
-	* libc/include/reent.h: #include <machine/types.h> to get _CLOCK_T_.
-	(struct tms, timeval, timezone): Declare.
-	(_gettimeofday_r, _times_r): Declare.
-	* libc/include/time.h (_CLOCK_T_): Don't #undef.  Remove
-	#ifdef _CLOCK_T_ surrounding definition of clock_t.
-	(time_t): Add multiple definition protection, __time_t_defined.
-	* libc/include/sys/time.h: Don't #include <time.h>.
-	Always define struct timezone (remove #ifndef _TIME_H_).
-	* libc/include/sys/times.h (_CLOCK_T_): Don't #undef.  Remove
-	#ifdef _CLOCK_T_ surrounding definition of clock_t.
-	* libc/reent/Makefile.in (OFILES): Add timer.o.
-	(CHEWOUT_FILES): Add timer.def.  Add timer.o/timer.c dependence.
-	* libc/reent/timer.c: New file.
-	* libc/time/clock.c: #include <reent.h>.
-	(clock): Call _times_r instead of times.
-	* libc/time/time.c (HAVE_GETTIMEOFDAY): Renamed from
-	HAVE_GET_TIME_OF_DAY.
-	Add comment regarding supporting OS routine(s) required (for docs).
-	#include <reent.h>.
-	(time): Call _gettimeofday_r instead of gettimeofday.
-	* libc/time/asctime.c: Fix comment regarding supporting OS routines.
-	* libc/time/ctime.c: Ditto.
-	* libc/time/strftime.c: Ditto.
-	* libc/sys/sparc64/Makefile.in (TEMPLATE_SFILES): Remove gettimeofday.
-	(TEMPLATE_SFILES_R): Define here.  Also define times.
-	Add times_r.o/times.S dependence.
-	(time2.c, junk.c): Deleted.
-	* libc/sys/sparc64/time2.c: Deleted.
-	* configure.in (sparc64-*-*): Define HAVE_GETTIMEOFDAY.
-
-	* libc/stdio/mktemp.c (_getpid_r): Renamed from _getpid.
-	* libc/stdio/tmpnam.c (_getpid_r): Ditto.
-	* libc/sys/sparc64/junk.c: Deleted.
-
-Mon Mar 21 16:51:03 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/Makefile.in: Add times syscall.
-	* libc/sys/sparc64/crt0.S: Handle stack bias at run time so we can
-	be used with and without it.  Add comment clarifying Medium/Anywhere
-	model requirements.
-	* libc/sys/sparc64/sigsetjmp.S (setjmp, longjmp): Add svr4 support.
-	* libc/sys/sparc64/sys/syscall.h (SYS_times): Define for sunos4
-	even if obsolete.
-
-Sun Mar 20 15:51:47 1994  Doug Evans  (dje@cygnus.com)
-
-	* configure.in (target_cflags): Move init.
-	(sparc64-*-*): Define HAVE_BLKSIZE.
-
-Wed Mar  9 10:44:52 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/sys/_types.h: New file.
-	* libc/include/reent.h: #include it.
-	Add comment describing REENTRANT_SYSCALLS_PROVIDED and
-	MISSING_SYSCALL_NAMES.
-	Sort syscalls.
-	* libc/include/_syslist.h: Remove _raise.
-	* libc/reent/signalr.c: New file.
-	* libc/reent/Makefile.in: Compile it.
-	* libc/signal/signal.c: Only use ifdef SIMULATED_SIGNALS.
-	Add doc for raise and _raise_r.
-	* libc/signal/raise.c: Only use ifndef SIMULATED_SIGNALS.
-	(raise): Call _raise_r.
-	(_raise_r): Call _getpid_r and _kill_r.
-	* libc/stdlib/abort.c: Remove inclusion of stdio.h and _syslist.h.
-	(abort): Loop forever calling raise and _exit.
-
-Mon Mar  7 14:40:08 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* configure.in: Remove extraneous echo.
-
-Thu Mar  3 12:14:22 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/sys/dirent.h (MAXNAMLEN): #undef to avoid
-	collision with unistd.h, and fix for svr4.
-
-Wed Mar  2 13:55:25 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdio/local.h (_llicvt): Declare.
-	(CVT_BUF_SIZE): Define (and buffer size from 512 to 128).
-	* libc/stdio/cvt.c: Include "local.h" to get CVT_BUF_SIZE.
-	(_llicvt): Define.
-	(_sicvt): Fix function header (`value' is short).
-	* libc/stdio/vfprintf.c (_vfprintf_r): Use CVT_BUF_SIZE.
-	Add printing of long long's support.
-	Add printing of 8 byte pointer support.
-
-Fri Feb 11 21:52:11 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)
-
-	* libc/sys/sh/syscalls.c (pipe, execv, wait, fork, utime, chown,
-	stat, chmod): New hooks. 
-	(sbrk): Abort if stack and heap collide.
-	* libc/machine/sh/udivsi3, libc/machine/sh/sdivsi3 Modified to
-	shortcut when given small args.
-	* libc/machine/sh/setjmp.s: Rewritten.
-	* libc/machine/sh/strcmp.s (strcmp): New function takes advantage
-	of cmp/str instruction.
-
-Wed Feb  9 15:12:35 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* configure.in: Accept powerpc* as a CPU type, using fp_dir ieeefp
-	and machine_dir powerpc.
-	* libc/include/machine/setjmp.h, libc/include/machine/ieeefp.h:
-	Add cases for __powerpc__.
-	* libc/machine/powerpc/Makefile.in, libc/machine/powerpc/setjmp.S:
-	New files.
-
-	* libc/include/stdio.h (_iprintf_r): Declare correctly.
-
-Thu Jan 27 10:36:27 1994  Steve Chamberlain  (sac@cygnus.com)
-
-	* libc/stdlib/callocr.c: New file with _calloc_r in it.
-	* libc/stdlib/calloc.c (calloc_r): Now in callocr.c
-
-Thu Jan 20 15:14:37 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdlib/ecvtbuf.c (print_f): Remove local "done".
-	(print_e): More comments to describe args, etc.
-	"type" arg may now be 'g' or 'G' for %g/G format --> remove
-	trailing blanks.
-	(_gcvt): Remove locals decpt, sign, end, p, done.
-	More comments for print_e invocation.
-	Pass "type" to print_e as is (g/G).
-
-Wed Jan 19 16:34:18 1994  Rob Savoye  (rob@darkstar.cygnus.com)
-
-	* stub/shared/m68k-crt0.S: Changed so it compiles (and runs) on a
-	stock m68000. 
-
-Mon Jan 17 15:41:53 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdlib/mallocr.c (_morecore_r): Fix aligning of pointer so it
-	works with any sized pointer, including ones bigger than ints and
-	longs.
-
-Thu Jan  6 14:53:21 1994  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/{time2.c,utime.S,utime2.c}: New files.
-
-Sat Dec 11 16:17:20 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/include/stdlib.h (_calloc_r): Add prototype.
-	* libc/machine/h8500/negsi2.c: New file.
-	* libc/machine/h8500/divsi3.c: Prevent overflow when dividing v
-	large unsigned numbers.
-	* libc/machine/h8500/cmpsi.c: Add cmppsi.
-	* libc/stdlib/mallocr.c (morecore_r): Fix aligning pointers so it
-	works when sizeof(size_t) != sizeof(char *).
-	* libc/stdlib/mprec.c (Balloc): Call calloc rather than malloc to
-	get play area
-	* libc/stdlib/mprec.h: Define Just_16 if generating for z8000.
-
-Mon Dec  6 15:59:53 1993  Doug Evans  (dje@rtl.cygnus.com)
-
-	* libc/include/assert.h (assert): Handle -traditional.
-
-Tue Nov 16 15:49:24 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* Makefile.in: added ; after every "fi" and "done" that wasn't at
-	the end of a line (ie. anything before a backslash continuation)
-	so that bash handles them.
-
-Tue Nov 16 12:31:57 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
-
-	* libc/sys/go32/lstat.s: new file, copied from stat.s and renamed
-        stat to lstat
-
-Mon Nov 15 15:50:43 1993  Steve Chamberlain  (sac@jonny.cygnus.com)
-
-	* libc/sys/sh/crt0.s, libc/sys/sh/trap.s,
-	libc/machine/sh/sdivsi3.s, libc/machine/sh/setjmp.s,
-	libc/machine/sh/udivsi3.s: Use new calling convention.
-
-Mon Nov 15 15:25:38 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/include/sys/unistd.h, libc/include/sys/stat.h: ANSI-fy
-	chmod, access, chdir, chown by making _path const. Also fix _amode
-	param of access.
-
-Fri Nov 12 20:25:28 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/sys/a29khif/_tmpnam.s (_tmpnam): renamed function to
-	_khif_tmpnam, because it doesn't comply with ANSI but may be
-	useful anyway. Real tmpnam was already in libc/stdio, and was
-	colliding with this one (pr 2176.) 
-	* libc/sys/a29khif/stubs.s (tmpnam): removed tmpnam. This file is
-	the wrong idea anyhow.
-
-Mon Nov  8 07:50:16 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* configure.in: Remove h8300h, we have multilib now.
-
-Fri Nov  5 12:37:27 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/string/strcasecmp.c, libc/string/strncasecmp.c: new
-	functions, to get preference over the ones in libiberty (since we
-	provide correct declarations in <string.h>.
-	* libc/string/Makefile.in: add support for strncasecmp,
-	strcasecmp.
-
-Fri Nov  5 09:05:45 1993  D. V. Henkel-Wallace  (gumby@blues.cygnus.com)
-
-	* Change netware config not to look for cpu explicitly.
-
-Thu Nov  4 14:21:25 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/{creat.c,junk.c}: New files.
-	* libc/sys/sparc64/Makefile.in: Add dependencies.
-
-Wed Nov  3 10:42:49 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* configure.in: Clean up v9 a bit, new "os" aoutv8.
-
-Tue Nov  2 10:00:44 1993  D. V. Henkel-Wallace  (gumby@cygnus.com)
-
-	* libc/include/sys/reent.h: make structure smaller by allocating
-	some stuff when needed.
-	* libc/signal/signal.c: allocate as needed
-	* libc/stdio/findfp.c,stdio/local.h: ditto
-	* libc/stdlib/mprec.c: ditto
-
-	* libc/time/localtime.c: don't return a dangling stack ptr.
-
-Wed Sep 29 20:42:34 1993  Rob Savoye  (rob@darkstar.cygnus.com)
-
-	* stub/mvme135/crt0.S, stub/mvme135/glue.c: Moved to stub/generic.
-
-Wed Sep 29 16:27:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* libc/include/stdio.h (__sputc): comment out static inline which
-	  confuses coff toolchains.
-
-Thu Sep  2 16:31:36 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/sys/a29khif/{_close.s, _fstat.s, _lseek.s, _sbrk.s,
-	_write.s, getpid.c, kill.c, read.s}:
-	* libc/sys/a29khif/stubs.s: eliminated stubs that already go
-	through the syscalls directory.
-
-Fri Oct 29 13:59:58 1993  Jeffrey Wheat  (cassidy@cygnus.com)
-
-	* configure.in: fixed double quote gotcha.
-
-Wed Oct 27 15:27:09 1993  Rob Savoye  (rob@darkstar.cygnus.com)
-
-	* stub/ex931: stub library for sparclite board.
-	* stub/idp: Renamed from mc68ec. Added contructor table
-	stuff to linker script.
-	* stub/mvme135: Renamed from m68kmvme. Added contructor table
-	stuff to linker script.
-
-Tue Oct 26 17:01:23 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* configure.in: Configure testsuites only if they exist.
-
-Tue Oct 26 12:37:11 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* configure.in: Don't set machine_dir for i386 until there is
-	something in libc/machine/i386 to compile.  For i[34]86-*-netware*
-	use sys/netware, don't use signal, define NO_EXEC, ABORT_PROVIDED,
-	CLOCK_PROVIDED and MALLOC_PROVIDED.
-
-	* libc/sys/netware: New directory.  Contains simplistic and
-	probably incorrect stubs for NetWare.  Should be enough to load
-	the library.
-	* libc/sys/netware/crt0.c, libc/sys/netware/environ.c,
-	libc/sys/netware/getpid.c, libc/sys/netware/link.c: New NetWare
-	stub files.
-
-	* libc/reent/execr.c: Don't use if NO_EXEC is defined.
-	* libc/reent/sbrkr.c: Don't use if MALLOC_PROVIDED is defined.
-	* libc/stdlib/abort.c: Don't use if ABORT_PROVIDED is defined.
-	* libc/time/clock.c: Don't use if CLOCK_PROVIDED is defined.
-
-Mon Oct 25 16:48:08 1993  Roland H. Pesch  (pesch@cygnus.com)
-
-	* testsuite/Makefile.in: add "docs" dummy target for consistency
-	with rest of newlib; turn "info" and "install-info" into dummy
-	targets, since they wouldn't have worked.  (Depended on
-	nonexistent "doc" subdir.)
-
-Fri Oct 22 20:37:32 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
-
-	* configure.in: handle mips* instead of mips
-
-Thu Oct 21 08:57:24 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/sys/dirent.h: New file.  If it is not overridden by
-	a version of libc/sys/*/sys/dirent.h, it includes the next
-	<dirent.h> file in case there is one lurking somewhere.
-
-Fri Oct 15 14:17:40 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* libc/stdlib/strtoul.c (_strtoul_r): Several changes for ANSI
-	compliance, namely: Accept a minus sign.  Consider a single 0 with
-	a radix of 0 as being a conversion.  Determine overflow correctly.
-	If an overflow occurs, set *ptr to the end of the number, not the
-	middle.
-	* lib/stdlib/strtol.c (_strtol_r): Determine overflow correctly.
-
-Thu Oct 14 21:49:52 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/machine/h8300/divsi3.S (divmodsi4): Fix h8300h case.
-
-Fri Oct  1 17:17:34 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* Makefile.in (INSTALL): Use $srcrootpre.
-	(crt0.o): Replace $< with $(CRT0_DIR)/$(CRT0), Sun make
-	can't handle it.
-	* libc/Makefile.in (crt0.o): Spell out $<, Sun make can't handle
-	it.
-	* libc/sys/Makefile.in (crt0.o, lib.a): Ditto.
-	* stub/Makefile.in (crt0.o, TARGETLIB): Ditto.
-	* libc/sys/sparc64/Makefile.in (isatty.o): Sun VPATH lossage.
-	* libm/math/Makefile.in (matherr.o): Ditto.
-
-Thu Sep 30 11:09:17 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
-
-	* configure.in: Build multidirs for z8k.
-	* libc/include/stdlib.h (_strtoul_r): add prototype.
-	* libc/include/machine/limits.h: Get INT_MIN right for all the z8k family.
-	* libc/include/machine/setjmp.h: Add for z8k.
-	* libc/machine/z8k/{mulsi.o, udivsi3.o, umodsi3.o, modsi3.o} obsolete.
-	* libc/sys/z8ksim/glue.c: tidy up.
-
-Mon Sep 20 14:04:46 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/unix/{execl.c execle.c execlp.c execv.c execvp.c}:
-	New files.  Requires execve system call.
-	* libc/unix/Makefile.in: Use them.
-	* libc/sys/sparc64/{execl.c execle.c execlp.c execv.c execvp.c}:
-	Deleted, moved to libc/unix.
-	* libc/sys/sparc64/Makefile.in: Remove them.
-
-Mon Sep 20 10:38:32 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/{template.S template_r.S}: New files.
-	* libc/sys/sparc64/Makefile.in: Build source for trivial syscalls
-	from templates.
-	* libc/sys/sparc64/{chdir.S chmod.S close.S dup.S fcntl.S
-	fork.S fstat.S lseek.S link.S mkdir.S open.S pipe.S read.S rmdir.S
-	umask.S unlink.S wait4.S write.S}: Removed, now built from
-	templates.
-
-Sun Sep 19 14:52:57 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/time/time.c: #include <_ansi.h>.
-
-Sun Sep 19 13:43:25 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* configure.in (sparc64-*-*): Remove -D__SIZE_TYPE__.
-
-Mon Sep 13 13:52:16 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* configure.in: match m8* rather than m88k so that m88110 is
-	  recognized as well.
-
-Tue Sep  7 12:19:32 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/h8300hms/{Makefile.in, _exit.c, misc.c}:
-	Renamed exit.c to _exit.c to avoid collision with stdlib/exit.c.
-	misc.c: New file.
-
-	* configure.in: Add multilib support to h8300.
-
-Mon Sep  6 14:07:06 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdlib/abort.c (abort): Remove _VOLATILE from return type.
-	* libc/include/_ansi.h (_ATTRIBUTE): New macro for __attribute__.
-	* libc/include/stdlib.h (exit, abort): Add noreturn attribute.
-
-Mon Sep  6 14:24:18 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	* configure.in: Corrected multidirs for sparc target.
-
-Mon Aug 30 15:56:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
-
-	Support for building newlib multiple times with different
-	compilation flags.
-	* configure.in: Only configure doc at top level.  Set multidirs
-	when appropriate for target, unless not at top level.  If
-	multidirs is set, independently configure each subdirectory.
-	Adjust TOP, MULTIDIRS and MULTISUBDIR appropriately in Makefile.
-	* Makefile.in (MULTIDIRS, MULTISUBDIR): New variables,
-	automagically set by configure.in.
-	(all): If MULTIDIRS is set, build multiple copies of libraries.
-	(install): If MULTIDIRS is set, install multiple copies of
-	libraries.  Install in $(tooldir)/lib/$(MULTISUBDIR).  If
-	MULTISUBDIR is set, don't bother to install header files.
-	* host/any (INCLUDES, CHEW): Use $(SRCTOP) rather than $(TOP) from
-	${srcrootpre}.
-	* stub/configure.in: Set MULTISUBDIR appropriately.
-	* stub/Makefile.in (install): Install in
-	$(tooldir)/lib/$(MULTISUBDIR).
-	* All Makefile.in files: Define SRCTOP as well as TOP.
-
-Mon Aug 30 10:34:24 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/machine/h8300/{mulhi3.S, divhi3.S}: Comment out if h8300h.
-	* libc/machine/h8300/{mulsi3.S, divsi3.S}: Add h8300h support.
-
-Thu Aug 26 19:38:12 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/h8300hms/exit.c (_exit): New function.
-
-Wed Aug 25 16:31:48 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* configure.in: recognize m88110.
-
-Fri Aug 20 16:46:23 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* libc/sys/m88kbug/crt0.c: pretty up, remove extraneous comments,
-	  prototype main and call with args.
-
-Fri Jul 30 16:52:47 1993  K. Richard Pixley  (rich@cygnus.com)
-
-	First real try at system traps for m88k-bug.
-	* libc/sys/m88kbug/syscalls.c: many changes.  Convert from stubs
-	  to real trap calls.
-	* libc/sys/m88kbug/sys/systraps.h: new file.
-
-Tue Jul 27 16:31:16 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	Patches to fix info building when target does not use sys
-	directory.
-	* libc/Makefile.in (targetdep.tex): add sys.tex separately.
-	* libc/sys.tex, libc/sys/sys.tex: moved from libc/sys/sys.tex to
-	  libc/sys.tex.
-	* libc/sys/Makefile.in (doc): do nothing.
-
-Mon Jul 26 17:08:11 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* libc/Makefile.in (CRT0): new macro.
-	  (all): depend on $(CRT0) rather than crt0.o.
-
-	* configure.in: fix libc_sys_dir -> libc_sys_lib thinko.
-	  do not default crt0, instead, set crt0 and crt0_dir based on
-	  sys_dir and stub_dir.
-
-	* Makefile.in (CRT0_DIR): new macro.
-	  (all): depend on $(CRT0) rather than crt0.o which may not exist.
-	  (crt0.o): depend on $(CRT0_DIR)/$(CRT0) rather than simply
-	  $(CRT0).
-	  ($(CRT0)): recur by cd'ing into $(CRT0_DIR).
-
-Sun Jul 25 17:51:51 MDT 1993  Jeffrey Wheat  (cassidy@cygnus.com)
-
-	* testsuite/lib/libm.exp: 
-		added code to support compiling and linking of tests for 
-		libm.sac (paranoia to be added next) and processing the 
-		pass or failure of the tests.
-
-	* testsuite/config/unix-libm.exp:
-		platform specific proc's for dealing with compiler, linker
-		and the way we execute and process the test results.
-
-	* testsuite/libm.sac/execute.exp:
-		generic framework for the sac tests. the config and lib 
-		expect code for specific platforms tie it all together.
-
-	* testsuite/libm.sac/test_is.c:
-		changed the output of the test to be consistant with the
-		other tests. parsing of pass nad fail messages is now fixed.
-
-Fri Jul 23 19:20:07 1993  Per Bothner  (bothner@kalessin)
-
-	* libc/include/{assert.h, ctype.h, dirent.h, errno.h, fastmath.h,
-	locale.h, math.h, pwd.h, reent.h, setjmp.h, signal.h, stdio.h,
-	stdlib.h, string.h, termios.h, time.h, utime.h, utmp.h}: For C++:
-	#ifdef __cplusplus, surround by extern ""C { ... }.
-	* libc/include/assert.h:  Do *not* protect assert.h against
-	multiple inclusion!  Also, #undef it before #define, to allow
-	redefinition.
-	* libc/include/stdio.h (getlogin, cuserid):  Removed.  These
-	should be only in unistd.h.
-
-	* libc/include/sys/{fcntl.h, reent.h, stat.h, time.h, times.h,
-	unistd.h}: For C++: #ifdef __cplusplus, surround by extern ""C {
-	... }.
-
-Fri Jul 23 10:15:33 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/machine/sparc/Makefile.in: Must create a library, even
-	if empty.
-
-Wed Jul 21 16:00:37 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* configure.in: set machine_dir for m88k.  edit crt0 definition
-	  into makefiles.
-
-	* Makefile.in, libc/Makefile.in (crt0): pull up from lower directories.
-
-	* libc/Makefile.in (all): also build crt0.o.
-
-	* libc/machine/i386/Makefile.in, libc/machine/sparc/Makefile.in,
-	  libc/machine/z8k/Makefile.in, libm/Makefile.in (clean): no need
-	  to remove CRT0.
-
-	* libc/machine/m88k/Makefile.in (TOP, TARGETLIB): removed.
-	  (all): reworked to build in place.
-	  (clean): remove lib.a
-	  (Makefile): remove redundant ./, call $(SHELL) rather than sh.
-
-	* libc/sys/m88kbug/crt0.c (start): renamed to _start.
-	  (_start): key off edata rather than _start_bss.
-
-Wed Jul 21 14:29:47 1993  david d `zoo' zuhn  (zoo@cygnus.com)
-
-	* libc/include/sys/unistd.h, libc/include/reent.h,
-	libc/reent/sbrkr.c: change sbrk to return void* instead of char*.
-
-Tue Jul 20 13:19:18 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* libm/Makefile.in, libc/Makefile.in ($(SUBDIRS)): dollar escape a dollar sign.
-
-	* Makefile.in (libc.a): break into two rules, one for libc.a and
-	  one for libc/libc.a.  Force subdirs current before rebuilding
-	  library.
-	  (libm.a): break into two rules, one for libm.a and one for
-	  libm/libm.a.  Force subdirs current before rebuilding library.
-
-	* libc/Makefile.in (SUBLIBS): fix typo.
-
-	* libc/sys/Makefile.in (all): force descent into subdirs, then
-	  rebuild library iff out of of date.
-
-Fri Jul 16 17:47:57 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	Rework so that library is built and then finished rather than
-	being built on each invocation of make.
-
-	* host/any (machine_dir, sys_dir, signal_dir): these are not
-	  shared and have been moved to their associated Makefile.in's.
-	  (AR_FLAGS): switch to qc which is faster.
-	* configure.in: no longer assign machine_dir for m88k.  set
-	  stub_dir, stub_lib, & crt0 for m68k*-unknown-{aout,coff}.  If
-	  stub_dir set, then add to configdirs.  add comment about silly
-	  configuration.
-	  (configdirs): drop stub.  It will be added only
-	  when needed.
-	  (libm_fp_lib, libc_unix_lib, libc_signal_lib, libc_machine_lib,
-	  libc_sys_dir, fake_sys_dir, libc_fake_sys_lib, stub_dir,
-	  stub_lib, crt0): new variables for tailoring lower level
-	  makefiles.  Assign accordingly and edit into makefiles.
-	* libm/Makefile.in: updated copyright.
-	  (TARGETLIB): removed.
-	  (FLAGS_TO_PASS): removed TARGETLIB, machine_dir, sys_dir.
-	  (SUBDIRS): removed TARGETDEP_DIRS.
-	  (LIBM_FP_LIB, SUBLIBS): new macros.
-	  (all): reworked.
-	  (force): new target to force rebuilds.
-	  (Makefile): call $(SHELL) rather than sh.  drop redundant ./
-	* libc/sys/a29khif/Makefile.in, libc/sys/decstation/Makefile.in,
-	  libc/sys/go32/Makefile.in, libc/sys/h8300hms/Makefile.in,
-	  libc/sys/h8500hms/Makefile.in, libc/sys/m88kbug/Makefile.in,
-	  libc/sys/sh/Makefile.in, libc/sys/sparc64/Makefile.in,
-	  libc/sys/sun4/Makefile.in, libc/sys/sysvi386/Makefile.in,
-	  libc/sys/sysvnecv70/Makefile.in, libc/sys/z8ksim/Makefile.in,
-	  stub/m68kmvme/Makefile.in: updated copyright.
-	  (TARGETLIB, TARGETCRT0, CRT0): macros removed.
-	  (all): reworked.  made this the default rule.
-	  (clean): also remove lib.a.
-	  (Makefile): call $(SHELL) rather than sh.  drop redundant ./
-	* stub/Makefile.in: updated copyright.
-	  (TARGETLIB, TARGETCRT0, CRT0, TOP): removed.
-	  (stub_lib): new macro.
-	  (FLAGS_TO_PASS): removed TARGETLIB, stub_dir, TARGETCRT0.  Added
-	  RANLIB.
-	  (all): reworked.
-	  (clean, install): assume stub_dir exists.
-	  (Makefile): depend on configure.in.  call $(SHELL) rather than
-	  sh.  drop redundant ./
-	* stub/configure.in (stublib): new macro, assign it, edit it into
-	  makefiles.
-	* Makefile, libc/Makefile.in, doc/Makefile.in, libc/sys/Makefile.in:
-	  updated copyright.
-	  (all): reworked.
-	  (Makefile): call $(SHELL) rather than sh.  drop redundant ./
-	* libc/Makefile.in (TARGETCRT0): removed.
-	  (FLAGS_TO_PASS): dropped TARGETLIB, machine_dir, sys_dir,
-	  TARGETCRT0.
-	  (SUBDIRS): drop TARGETDEP_DIRS.
-	  (LIBC_SIGNAL_LIB, LIBC_SYS_LIB, LIBC_MACHINE_LIB, LIBC_UNIX_LIB,
-	  LIBC_FAKE_SYS_LIB, SUBLIBS): new macros for configuration.
-	  (force): new target to force rebuilds.
-	* libc/sys/Makefile.in (TARGETCRT0, sys_dir): removed.
-	  (FLAGS_TO_PASS): TARGETLIB, machine_dir, sys_dir, TARGETCRT0
-	  removed.
-	  (clean): assume sys_dir always exists.
-	* libm/test/Makefile.in (Makefile): call $(SHELL) rather than sh.
-	  drop redundant ./
-	* libc/ctype/Makefile.in, libc/errno/Makefile.in,
-	  libc/locale/Makefile.in, libc/machine/Makefile.in,
-	  libc/machine/a29k/Makefile.in, libc/machine/h8300/Makefile.in,
-	  libc/machine/h8500/Makefile.in, libc/machine/i386/Makefile.in,
-	  libc/machine/i960/Makefile.in, libc/machine/m68k/Makefile.in,
-	  libc/machine/mips/Makefile.in, libc/machine/necv70/Makefile.in,
-	  libc/machine/sh/Makefile.in, libc/machine/sparc/Makefile.in,
-	  libc/machine/z8k/Makefile.in, libc/reent/Makefile.in,
-	  libc/signal/Makefile.in, libc/stdio/Makefile.in,
-	  libc/stdlib/Makefile.in, libc/string/Makefile.in,
-	  libc/sys/Makefile.in, libc/syscalls/Makefile.in,
-	  libc/time/Makefile.in, libc/unix/Makefile.in,
-	  libm/ieeefp/Makefile.in, libm/math/Makefile.in: updated copyright.
-	  (TARGETLIB): removed.
-	  (all): reworked.
-	  (clean): also remove lib.a.
-	  (Makefile): call $(SHELL) rather than sh.  drop redundant ./
-	* Makefile.in: (machine_dir, sys_dir, stub_dir, stub_lib, CRT0):
-	  new macros.
-	  (SUBDIRS): moved to follow frag inclusion, change stub to
-	  stub_dir.
-	  (FLAGS_TO_PASS): removed machine_dir, sys_dir, signal_dir which
-	  are now set in the libc Makefile.
-	* libc/machine/Makefile.in (TARGETCRT0, machine_dir): removed.
-	  (FLAGS_TO_PASS): removed TARGETLIB, machine_dir, sys_dir,
-	  TARGETCRT0.
-	  (force): new target to force rebuilds.
-	* stub/configure.in: determine and set stub_lib for for Makefile.
-
-Thu Jul 15 12:01:27 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/h8300hms/Makefile.in: Make `all' the default target.
-	crt0.s renamed to crt0.S.
-	* libc/sys/h8300hms/crt0.S: Add h8/300h support.
-
-	* libc/machine/h8300/Makefile.in: Make `all' the default target.
-	* libc/machine/h8300/{cmpsi.S,ucmpsi.S}: #ifdef out entire file if
-	h8300h.
-	* libc/machine/h8300/defines.h: Add macros to handle pointers for
-	h8300 (16 bits) and h8300h (32 bits).
-	* libc/machine/h8300/{divsi3.S,mulsi3.S,memcpy.S,memset.S,
-	reg_memcpy.S,reg_memset.S,strcmp.S}: Add h8300h support.
-
-Thu Jul 15 10:13:29 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/machine/m88k/setjmp.S, Makefile.in: New files; a simple
-	implementation of setjmp and longjmp for the m88k.
-	* libc/include/machine/setjmp.h: Added __m88000__ case.
-
-Wed Jul 14 10:10:30 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* configure.in: Recognize h8300h as variant of h8300.
-
-Tue Jul 13 12:24:11 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
-
-	* libc/include/sys/unistd.h (read, write): get prototypes right.
-	(sbrk): New prototype.
-	* libc/reent/sbrkr.c (sbrkr): Use correct sbrk prototype.
-	* libc/stdio/local.h: Include unistd.h.
-	* libc/machine/h8300/syscalls.c: Names have changed.
-
-Mon Jul 12 18:08:42 1993  K. Richard Pixley  (rich@cygnus.com)
-
-	* configure.in: add sys_dir assignment for m88k-bug.
-
-Thu Jul  8 09:16:21 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/sys/syscallasm.h: New macros to handle either
-	a.out or elf.
-	* libc/sys/sparc64: all *.S files: Use new macros.
-	* libc/sys/sparc64/isatty.c: New file.
-	* libc/sys/sparc64/Makefile.in: Stop using /lib/libc.a for
-	functions beyond what newlib provides.
-
-Thu Jul  8 09:11:28 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/sys/stat.h: Move st_atime so not doubly defined for
-	svr4.
-
-Thu Jul  8 09:09:16 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Add support for h8/300h.
-
-Fri Jul  2 10:11:20 1993  K. Richard Pixley  (rich@cygnus.com)
-
-	* configure.in: add m88k.
-	* libc/include/machine/ieeefp.h: add case for m88k.  Also add
-	sanity check so no one else need ever chase what I did to find
-	this.
-
-	* libm/math/Makefile.in (FAKEC): added atanf.c log1pf.c scalbnf.c.
-
-Fri Jul  2 09:15:21 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* doc/makedoc.c: Include <ctype.h>.
-
-Wed Jun 30 09:35:06 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/Makefile.in (FLAGS_TO_PASS): Add TARGET_ASFLAGS.
-	* libc/sys/Makefile.in (FLAGS_TO_PASS): Add TARGET_ASFLAGS.
-	* libc/machine/Makefile.in (FLAGS_TO_PASS): Add TARGET_ASFLAGS.
-
-	* libm/test/Makefile.in (all): Link with ../../lib[cm].a.
-
-Sun Jun 27 17:05:20 1993  Doug Evans  (dje@sphagnum.cygnus.com)
-
-	* libc/include/errno.h (ENOSYS): Added.
-
-	* libc/unix/getpwd.c (getcwd): Fix typo (_up -> up).
-
-Mon Jun 21 09:03:32 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
-
-	* libc/stdio/fflush.c (fflush): Check for reent struct
-	initialization.
-	* libc/stdio/fdopen.c (fdopen): Avoid namespace conflict.
-
-Fri Jun 18 16:06:05 1993  Mark Eichin  (eichin@rtl.cygnus.com)
-
-	* libc/stdlib/dtoastub.c: new file -- move user callable "dtoa"
-	out of dtoa.c so it doesn't pollute the namespace.
-	* libc/include/_syslist.h: new file -- mappings from _function to
-	function, for systems where we can't win (by default, all of them,
-	until we start updating system calls.)
-	* libc/syscalls: new directory -- stubs for exporting _function
-	names as unmodified function names.
-	* libc/configure.in: add MISSING_SYSCALL_NAMES to enable
-	_syslist.h on all platforms by default, but put hooks in for
-	fake_sys_dir so we can include it when we've renamed the system
-	calls.
-	* libc/reent/execr.c libc/reent/filer.c libc/reent/fstatr.c
-	libc/reent/linkr.c libc/reent/sbrkr.c libc/reent/statr.c
-	libc/signal/raise.c libc/signal/signal.c libc/stdio/fdopen.c
-	libc/stdio/mktemp.c libc/stdio/tmpnam.c libc/stdlib/abort.c
-	libc/stdlib/system.c libc/unix/getcwd.c libc/unix/getlogin.c
-	libc/unix/getpass.c libc/unix/getut.c libc/unix/ttyname.c: change
-	non ANSI functions to call _function.
-
-Wed Jun  9 09:48:26 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/stdlib/strtoul.c (_strtoul_r): Handle leading 0 correctly
-	when base 16 is specified.  Don't accept non-digits if radix > 10.
-
-Thu Jun  3 10:01:15 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/math.h: Rename xxx_r fns to _xxx_r.
-
-Wed Jun  2 16:54:16 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-	* libc/include/sys/stat.h: Surround text after #endif with
-	comments.
-
-Wed Jun  2 12:47:32 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/stdlib/mallocr.c: If MALLOC_PROVIDED is defined, just make
-	_malloc_r, _realloc_r, and free_r call the corresponding
-	non-reentrant functions.
-
-	* libm/math/modf.c (modf): We now take the address of ipart, so
-	don't make it a register variable.
-
-Tue Jun  1 18:25:54 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libm/math/*: Rename all xxx_r fns to _xxx_r.
-
-Wed May 26 22:06:35 1993  Roland H. Pesch  (pesch@cygnus.com)
-
-	* libc/libc.texinfo and embedded docn throughout: formatting
-	improvements, minor rephrasing for clarity, and improved
-	reentrancy docn.
-
-Sun May 23 17:29:49 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libm/ieeefp/infinity.c (maxpowtwof): Fix initialzation bug.
-
-	* libc/stdio/cvt.c (_licvt): Print the right value on machines
-	where sizeof(int) != sizeof(long).
-
-Fri May 21 22:09:32 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/reent/execr.c, libc/reent/filer.c, libc/reent/linkr.c,
-	libc/reent/sbrkr.c, libc/reent/statr.c, libc/stdio/tmpnam.c,
-	libc/stdlib/atol.c, libc/stdlib/rand.c, libc/string/strpbrk.c,
-	libc/string/strspn.c, libm/ieeefp/isnan.c, libm/math/bessel.c,
-	libm/math/matherr.c: changes for better docn formatting (info).
-
-	* libc/libc.texinfo, libc/ctype/ctype.tex, libc/locale/locale/tex,
-	libc/reent/reent.tex, libc/signal/signal.tex,
-	libc/stdio/stdio.tex, libc/stdlib/stdlib.tex,
-	libc/string/strings.tex, libc/sys/sys.tex, libc/time/time.tex,
-	libm/libm.texinfo, libm/ieeefp/ieeefp.tex, libm/math/math.tex: use
-	makeinfo node defaulting to get better Info file node structure.
-	(Requires recent sac change to doc/makedoc.c and doc/doc.str.)
-	Also include a few formerly missing sections (subroutines).
-
-	* doc/doc.str: delete fossil expansion for "func"
-
-	* default.menu, no-signal.menu: delete.
-
-	* Makefile.in, libc/Makefile.in, configure.in, host/any: simplify
-	method used to adjust doc for missing "signals" chapter when 
-	signal_dir is empty.
-
-Thu May 20 21:38:37 MDT 1993  Jeffrey Wheat  (cassidy@cygnus.com)
-
-	* configure.in: added testsuite/libm.sac
-
-Wed May 19 14:52:34 1993  Doug Evans  (dje@thepub.cygnus.com)
-
-	* libc/sys/sparc64/crt0.S: Set %g4 to 0 (to test Medium/Anywhere
-	code model).
-
-Tue May 18 13:17:21 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libm/Makefile.in: Use $(MAKE) rather than make, and define
-	MAKEOVERRIDES to be empty.
-
-Mon May 17 08:42:44 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: Don't build mips-*-* with -msoft-float, since that
-	makes it incompatible with hard floating point.
-
-Mon May 17 00:03:35 MDT 1993  Jeffrey Wheat  (cassidy@cygnus.com)
-
-	* Makefile.in: added recursive 'make check'
-
-Thu May 13 16:24:18 MDT 1993  Jeffrey Wheat  (cassidy@cygnus.com)
-
-	* configure.in: added ./testsuite ./testsuite/libm.paranoia
-	* ./testsuite/Makefile.in: created
-	* ./testsuite/libm.paranoia: paranoia tests added
-
-Thu May 13 10:30:24 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: For mips-*-* set machine_dir to mips.
-
-	* libc/machine/mips: New directory.
-	* libc/machine/mips/Makefile.in: New file.
-	* libc/machine/mips/setjmp.S: New file; simplistic MIPS version of
-	setjmp and longjmp.
-	* libc/include/machine/setjmp.h: Added __mips__ case.
-
-	* libc/machine/lmips: Removed unused and useless directory.
-
-Mon May  3 10:22:31 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: Accept i486-*-sco* as well as i386-*-sco*.
-
-Thu Apr 15 15:16:44 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/crt0.S: Add comment (%g1 contains atexit arg at
-	start up).
-
-Fri Apr  9 13:32:26 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/machine/setjmp-dj.h: Use _SETJMP_DJ_H rather than
-	SETJMP_H.
-
-Thu Apr  8 10:07:18 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libm/test/convert.c: structure member errno -> errno_val.
-	Must include <errno.h> to use errno, it's a macro now.
-	* libm/test/math.c: Ditto.
-	* libm/test/math2.c: Include errno.h.
-	* libm/test/string.c: Ditto.
-	* libm/test/test.h: structure member errno -> errno_val.
-	Remove extern int errno decl.
-
-Thu Apr  8 07:56:33 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/stdio/Makefile.in: Added dependencies on local header
-	files.
-	* libc/stdio/std.h, libc/stdio/vfprintf.h: Removed unused header
-	files.
-
-Wed Apr  7 16:19:32 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/machine/ieeefp.h: Added __MIPSEB__ case.
-
-Wed Apr  7 10:55:21 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdio/siprintf.c libc/stdio/sscanf.c libc/stdio/vsprintf.c:
-	Initialize _data.
-
-	* libc/stdio/vfprintf.c: No need to declare _icvt, _licvt, _sicvt.
-	* libc/stdio/local.h: Add prototype for _licvt.
-
-	* libc/stdio/ungetc.c (__submore): Use _malloc_r,_realloc_r
-	instead of malloc,reealloc.
-
-	* libc/stdlib/local.h: New file.
-	* libc/stdlib/efgcvt.c: #include local.h.
-	(gcvt): Fix call to _gcvt.
-	* libc/stdlib/ecvtbuf.c: #include local.h.
-
-	* libc/stdlib/Makefile.in: new files mallocr.c mstats.c.
-	* libc/stdlib/mallocr.c mstats.c malloc.h: New files.
-	* libc/stdlib/malloc.c: main routines moved to mallocr.c.
-
-	* libc/stdlib/atexit.c: moved global data to struct _reent.
-	* libc/stdlib/exit.c: use struct _atexit in struct _reent.
-
-	* libc/reent/reent.c (inpure_data): _REENT_INIT macro modified.
-
-Wed Apr  7 09:41:50 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/sys/reent.h: Stuff required by ANSI headers moved
-	here from ../reent.h.
-
-Tue Apr  6 12:56:01 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (MATHOBJS_IN_LIBC): List of object files which
-	should be provided in both libc.a and libm.a.
-	(libc.a): Depend on targ-include and libm.a.  Copy
-	$(MATHOBJS_IN_LIBC) from libm.a to libc.a.
-	(libm.a): Depend on targ-include.
-	* configure.in (subdirs): Removed libc/math.
-
-Mon Apr  5 10:18:16 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libm/ieeefp/infinity.c (maxpowtwo): Fix initialization bug.
-
-Sat Apr  3 11:06:07 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/{errno.h, math.h, stdio.h, stdlib.h}: Use
-	sys/reent.h instead of reent.h.
-	* libc/include/reent.h: Split into two parts: stuff needed by ANSI
-	headers moved to sys/reent.h.  
-	* libc/include/signal.h: _MAX_SIGNALS moved to sys/signal.h.
-	* libc/include/sys/signal.h: Define _MAX_SIGNALS if
-	__need__MAX_SIGNALS defined.
-	* libc/include/stdio.h: struct __sFILE moved to sys/reent.h.
-	std{in,out,err} refer to new _std{in,out,err} members.
-
-Fri Apr  2 11:27:12 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/include/sys/signal.h: #define _SYS_SIGNAL_H for general
-	case.
-
-Fri Apr  2 09:41:10 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/sys/sparc64/execve.S (execve): Insert nop in delay slot,
-	rather than whatever macro seterrno() has.
-
-Thu Apr  1 16:47:08 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/locale/locale.c: Reentrant routines _r_xxx renamed to
-	_xxx_r.  struct reent_struct renamed to struct _reent for ANSI.
-
-	* libc/include/machine/fastmath.h: Use _HAVE_STDC instead of
-	__STDC__.
-
-	* libc/reent/{execr.c, filer.c, fstatr.c, linkr.c, reent.c,
-	reent.tex, sbrkr.c, statr.c}: _r_xxx reentrant routines renamed to
-	_xxx_r.  struct reent_struct renamed to struct _reent for ANSI.
-
-	* libc/signal/signal.c: Reentrant routines _r_xxx renamed to
-	_xxx_r.  struct reent_struct renamed to struct _reent for ANSI.
-
-	* libc/stdio/{fclose.c, fdopen.c, findfp.c, fiprintf.c, flags.c,
-	fopen.c, fprintf.c, freopen.c, fscanf.c, fseek.c, ftell.c,
-	fwalk.c, getchar.c, gets.c, iprintf.c, local.h, makebuf.c,
-	mktemp.c, perror.c, printf.c, putchar.c, puts.c, refill.c,
-	remove.c, rename.c, scanf.c, setvbuf.c, siprintf.c, sprintf.c,
-	sscanf.c, stdio.c, tmpfile.c, tmpnam.c, vfprintf.c, vfprintf.h,
-	vfscanf.c, vprintf.c, vsprintf.c}: Reentrant routines _r_xxx
-	renamed to _xxx_r.  struct reent_struct renamed to struct _reent
-	for ANSI.  structure members given leading "_" for ANSI.  Use
-	_HAVE_STDC instead of __STDC__ and _HAVE_STDARG.
-
-	* libc/stdlib/{__adjust.c, calloc.c, dtoa.c, ecvtbuf.c, malloc.c,
-	mprec.c, mprec.h, rand.c, std.h, strtod.c, strtol.c, strtoul.c,
-	system.c}: Reentrant routines _r_xxx renamed to _xxx_r.  struct
-	reent_struct renamed to struct _reent for ANSI.
-	Structure members given leading "_" for ANSI.
-	_CONST --> const in prototypes.
-	Use _HAVE_STDC instead of __STDC__.
-
-	* libc/string/strtok.c: Reentrant routines _r_xxx renamed to
-	_xxx_r.
-	struct reent_struct renamed to struct _reent for ANSI.
-	Structure members given leading "_" for ANSI.
-
-	* libc/time/asctime.c: Reentrant routines _r_xxx renamed to
-	_xxx_r.
-	struct reent_struct renamed to struct _reent for ANSI.
-
-	* libm/math/{acos.h, acosh.h, asin.c, asinh.h, atanh.h, bessel.h,
-	cbrt.h, cosh.h, erf.c, erf.h, error.c, exp.c, fmod.c, frexp.h,
-	gamma.h, hypot.h, ldexp.c, log.h, log10.c, log1p.c log2.c,
-	mathimpl.h, pow.c, remainder.c, sincos.c, sinh.h, sqrt.h, tan.c,
-	tanh.h}: struct reent_struct renamed to struct _reent for ANSI.
-
-	* libc/include/{_ansi.h, ctype.h, math.h, reent.h, locale.h,
-	signal.h, stdio.h, stdlib.h, string.h, time.h}:
-	Use _HAVE_STDC instead of __STDC__ and _HAVE_STDARG.
-	#ifndef _STRICT_ANSI non-ANSI routines.
-	Reentrant routines renamed from _r_xxx to _xxx_r.
-	No need to use _STRICT_ANSI on _xxx_r reentrant routines.
-	Use _STRICT_ANSI instead of __STRICT_ANSI, _ANSI_SOURCE, etc.
-	Clean up namespace (structure members have leading "_").
-	struct reent_struct renamed to struct _reent for ANSI compliance.
-	_CONST --> const in function prototypes.
-
-	* libc/include/string.h: Add NULL and size_t.
-
-	* libc/sys/sparc64/Makefile.in: New syscall routines for link,
-	unlink, wait, wait4. Reentrant syscall routines close, fork,
-	fstat, link, lseek, open, read, sbrk, stat, unlink, wait, wait4,
-	write.
-	* libc/sys/sparc64/cerror.S (cerror_r): New routine.
-	* libc/sys/sparc64/{close.S, fork.S, fstat.S, link.S, lseek.S,
-	open.S, read.S, sbrk.S, stat.S, unlink.S, wait.S, wait4.S,
-	write.S}: Define reentrant versions.
-	* libc/sys/sparc64/sys/syscallasm.h (defsyscall_r): New macro for
-	reentrant syscalls.
-
-	* libc/sys/sparc64/crt0.S (start): Fix initialization of environ.
-
-	* libc/include/stdlib.h (RAND_MAX): Fix value.
-
-Thu Apr  1 12:28:30 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/a29khif/_main.c: Removed unnecessary file.
-	* libc/sys/a29khif/Makefile.in (OFILES): Removed _main.c, moved
-	VPATH support targets after all: target.
-
-	* stub/mvme135/mvme.S: Renamed exceptionhandler to
-	exceptionHandler, which is what mvme135-stub.c expects.
-
-Wed Mar 31 17:42:03 1993  Doug Evans  (dje@cygnus.com)
-
-	* libc/stdio/tmpnam.c (worker): Fix test for _r_open() failure.
-
-	* libc/unix/getpass.c (getpass): Use stdin,stderr instead of
-	def_stdin/def_stderr (latter removed from stdio.h to make it ANSI
-	compliant).
-
-Tue Mar 30 09:58:21 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/reent/execr.c (_r_wait): Re-order args to make reent_struct
-	first.
-	libc/reent/filer.c (_r_open, _r_close, _r_lseek, _r_read,
-	_r_write): Ditto.
-	libc/reent/fstatr.c (_r_fstat): Ditto.
-	libc/reent/linkr.c (_r_link, _r_unlink): Ditto.
-	libc/reent/sbrkr.c (_r_sbrk): Ditto.
-	libc/reent/statr.c (_r_stat): Ditto.
-
-	* libc/stdio/fopen.c (_r_fopen): Re-order args to _r_open.
-	* libc/stdio/freopen.c (freopen): Ditto for _r_open, _r_free.
-	* libc/stdio/fseek.c (fseek): Ditto for _r_fseek.
-	* libc/stdio/makebuf.c (__smakebuf): Ditto for _r_fstat.
-	* libc/stdio/mktemp.c (_gettemp): Ditto for _r_stat, _r_open.
-	* libc/stdio/remove.c (_r_remove): Ditto for _r_unlink.
-	* libc/stdio/rename.c (_r_rename): Ditto for _r_link, _r_unlink.
-	* libc/stdio/stdio.c (__sread): Ditto for _r_read.
-	(__swrite): Ditto for _r_lseek, _r_write.
-	(__sseek): Ditto for _r_lseek.
-	(__close): Ditto for _r_close.
-	* libc/stdio/tmpnam.c (worker): Ditto for _r_open, _r_close.
-
-	* libc/stdlib/malloc.c (_r_morecore): Re-order args to _r_sbrk.
-	* libc/stdlib/system.c (_r_system): Ditto for _r_wait.
-
-	* libc/include/reent.h: Re-order arguments to _r_xxx syscall fns
-	to make reent_struct the first argument (and thus consistent with
-	the rest of newlib).
-
-	* stub/mvme135/mvme135-stub.c (initializeRemcomErrorFrame): Remove
-	reference to __STDC__.
-
-Mon Mar 29 12:34:32 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdlib/exit.c (exit): Use _REENT->__cleanup instead of
-        global __cleanup.
-
-Wed Mar 24 11:54:35 1993  Doug Evans  (dje@canuck.cygnus.com)
-
-	* libc/stdio/freopen.c (freopen): Ensure stdio is initialized
-	first.
-	libc/stdio/fclose.c (fclose): Ditto.
-
-Tue Mar 23 01:26:52 1993  Doug Evans  (dje@rtl.cygnus.com)
-
-	* Run through indent and rename reentrant routines for ANSI.
-	libc/stdio/{clearerr.c cvt.c fclose.c fdopen.c feof.c ferror.c
-	fflush.c fgetc.c fgetpos.c fgets.c findfp.c fiprintf.c flags.c
-	fopen.c fprintf.c fputc.c fputs.c fread.c freopen.c fscanf.c
-	fseek.c fsetpos.c ftell.c fvwrite.c fwalk.c fwrite.c getc.c
-	getchar.c gets.c iprintf.c makebuf.c mktemp.c perror.c printf.c
-	putc.c putchar.c puts.c refill.c remove.c rename.c rewind.c rget.c
-	scanf.c setbuf.c setvbuf.c siprintf.c sprintf.c sscanf.c stdio.c
-	tmpfile.c tmpnam.c ungetc.c vfprintf.c vfscanf.c vprintf.c
-	vsprintf.c wbuf.c wsetup.c local.h}
-
-	* libc/locale/locale.c: Reformat and rename for ANSI, GNU style.
-
-	* Run through indent and rename xxx_r fns to _r_xxx for ANSI.
-	libc/stdlib/{__adjust.c __exp10.c __ten_mu.c abort.c abs.c
-	assert.c atexit.c atof.c atoi.c atol.c bsearch.c calloc.c div.c
-	dtoa.c ecvtbuf.c efgcvt.c exit.c getenv.c labs.c ldiv.c malloc.c
-	mbtowc.c mprec.c putenv.c qsort.c rand.c setenv.c strdup.c
-	strtod.c strtol.c strtoul.c system.c wctomb.c mprec.h}
-
-	* Run through indent.
-	libc/string/{bcmp.c bcopy.c bzero.c index.c memchr.c memcmp.c
-	memcpy.c memmove.c memset.c rindex.c strcat.c strchr.c strcmp.c
-	strcoll.c strcpy.c strcspn.c strerror.c strlen.c strncat.c
-	strncmp.c strncpy.c strpbrk.c strrchr.c strspn.c strstr.c strtok.c
-	strxfrm.c}
-
-	* libc/time/{asctime.c clock.c ctime.c difftime.c gmtime.c
-	localtime.c mktime.c strftime.c time.c}:
-	Run through indent and rename xxx_r (reentrant) fns to _r_xxx for ANSI.
-
-	* Reformatting + renaming (for ANSI, GNU style, consistency).
-	libc/include/{_ansi.h, assert.h, ctype.h, errno.h, fastmath.h,
-	ieeefp.h, locale.h, math.h, paths.h, pwd.h, reent.h, setjmp.h,
-	signal.h, stdio.h, stdlib.h, string.h, time.h, unistd.h}
-
-Fri Mar 19 11:28:01 1993  Doug Evans  (dje@cygnus.com)
-
-	* libc/include/stdio.h (stdin_r): Fix.
-
-Fri Mar 19 09:43:48 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in: Unexport some variables to keep GNU make from
-	putting them in the environment and using up needed ARG_MAX space
-	(a hack is used to let this work with older makes as well).
-
-Tue Mar 16 15:11:08 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in: Use $(MAKE) rather than make.
-	(MAKEOVERRIDES): Define to be empty.
-	(FLAGS_TO_PASS): Don't pass down LD (it's not used).
-	(libc.a, libm.a): Depend on targ-include.
-	* host/any (LD): Don't define.
-	(INCLUDES): Use targ-include.	
-	* stub/Makefile.in (MAKEOVERRIDES): Define to be empty.
-	(FLAGS_TO_PASS): Don't pass down LD (it's not used).
-	* libc/Makefile.in: Use $(MAKE) rather than make.
-	(MAKEOVERRIDES): Define to be empty.
-	(FLAGS_TO_PASS): Don't pass LD (it's not used).
-	(all): Rewrote to be slightly smaller.
-	* libc/machine/Makefile.in, libc/sys/Makefile.in (MAKEOVERRIDES):
-	Define to be empty.
-	(FLAGS_TO_PASS): Don't pass LD (it's not used).
-	* libm/Makefile.in (FLAGS_TO_PASS): Don't pass LD (it's not used).
-
-Mon Mar 15 08:45:41 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/go32/gerrno.s: Renamed from errno.s to avoid conflict
-	with errno/errno.c.
-
-Fri Mar 12 09:46:54 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Changes for reentrancy.
-	libc/stdio/fdopen.c, libc/stdio/freopen.c, libc/stdio/perror.c:
-	Use ptr->_errno, not errno.
-	libc/stdio/mktemp.c (mkstemp_r, mktemp_r): New functions.
-	libc/stdio/remove.c (remove_r): New function.
-	libc/stdio/rename.c (rename_r): New function.
-	libc/stdio/fopen.c, libc/stdio/freopen.c, libc/stdio/fseek.c,
-	libc/stdio/makebuf.c, libc/stdio/mktemp.c, libc/stdio/remove.c,
-	libc/stdio/rename.c, libc/stdio/stdio.c, libc/stdio/tmpnam.c: Use
-	reentrant versions of system calls.
-	libc/stdio/gets.c: Call getchar_f, not nonexistent getchar_r.
-	libc/stdio/scanf.c: Use stdin_r, not nonexistent stdin_n.
-	libc/stdio/tmpfile.c: Use tmpnam_f, not nonexistent tmpnam_r.
-	libc/stdio/findfp.c: Include <string.h>.
-	libc/stdio/fread.c, libc/stdio/rget.c, libc/stdio/scanf.c: Include
-	"local.h".
-	libc/stdio/wbuf.c: Include "fvwrite.h"
-
-	* libc/stdlib/{dtoa.c, ecvtbuf.c, mprec.c, strtod.c}: Include
-	<string.h>.
-	libc/stdlib/malloc.c: Call sbrk_r rather than sbrk.
-	(NULL): Don't define if already defined.
-	libc/stdlib/system.c: Call reentrant versions of system calls.
-	(system_r): New function.
-
-	* Changes for reentrancy.
-	libc/include/_ansi.h (_PARAMS): New macro.
-	libc/include/errno.h: Define errno as a macro that calls __errno.
-	(__errno_r): New macro for reentrant code.
-	libc/include/math.h: Include reent.h.  Declare many reentrant
-	functions.
-	(signgam): Now a macro, not a variable.
-	(struct exception): Added err field.
-	libc/include/reent.h: Don't declare __sglue.  Added function
-	declarations.
-	(struct reent_struct): Moved errno to beginning.  Added _signgam.
-	libc/include/stdio.h, libc/include/stdlib.h: Added function
-	declarations.
-
-	* More reentrancy hacking.
-	libc/errno/errno.c (__errno): New function.
-	libc/reent/execr.c, libc/reent/filer.c, libc/reent/fstatr.c,
-	libc/reent/linkr.c, libc/reent/sbrkr.c, libc/reent/statr.c: New
-	files.
-	
-	* Added many new reentrant functions to libm/math/*.
-	libm/math/error.c (__matherror): Added reent_struct pointer
-	argument. Changed all callers.
-	libm/math/gamma.c (signgam): Removed. Set ptr->_signgam, instead.
-	libm/math/exp.h, libm/math/pow.h, libm/math/sincos.h,
-	libm/math/tan.h: Removed obsolete unused header files.
-
-	* libc/sys/a29khif/stubs.s: Use register lr0, not v0.
-
-	* libc/sys/sun/Makefile.in (COPYOFILES): Don't pull in errno.o.
-
-Mon Mar  8 16:43:43 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/sys/a29khif/stubs.s: clobber safe register, and fill all
-	delay slots.
-
-Tue Mar  2 14:47:00 1993  Jeffrey Osier      (jeffrey@fowanton.cygnus.com)
-
-        * libc/libc.texinfo:  comment out reentrancy chapter (duh)
-
-Tue Mar  2 14:34:16 1993  Jeffrey Osier      (jeffrey@fowanton.cygnus.com)
-
-        * libc/reent/reent.tex:  New file.  (text from
-	newlib/libc/libc.texinfo)
-	* libc/stdio/tmpnam.c:  fixed doc typo
-	* libc/stdlib/rand.c:   fixed doc typo
-
-Tue Mar  2 14:34:16 1993  Jeffrey Osier      (jeffrey@fowanton.cygnus.com)
-
-        * libc/reent/reent.tex:  New file.  (text from
-	newlib/libc/libc.texinfo)
-
-Fri Feb 26 12:20:54 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	support for reentrancy
-	* libc/reent/reent.c, libc/reent/Makefile.in, libc/reent/reent.c:
-	new files
-	* libc/errno/errno.c, libc/include/ieeefp.h,
-	libc/include/locale.h, libc/include/reent.h,
-	libc/include/signal.h, libc/include/stdio.h,
-	libc/include/stdlib.h, libc/include/string.h, libc/include/time.h,
-	libc/signal/signal.c libc/stdio/cvt.c, libc/stdio/fclose.c,
-	libc/stdio/fdopen.c, libc/stdio/fflush.c, libc/stdio/fgets.c,
-	libc/stdio/findfp.c, libc/stdio/flags.c, libc/stdio/fopen.c,
-	libc/stdio/fputc.c, libc/stdio/freopen.c, libc/stdio/fseek.c,
-	libc/stdio/ftell.c, libc/stdio/fwalk.c, libc/stdio/getchar.c,
-	libc/stdio/gets.c, libc/stdio/glue.h, libc/stdio/iprintf.c,
-	libc/stdio/local.h, libc/stdio/makebuf.c, libc/stdio/perror.c,
-	libc/stdio/printf.c, libc/stdio/putchar.c, libc/stdio/puts.c,
-	libc/stdio/refill.c, libc/stdio/scanf.c, libc/stdio/setvbuf.c,
-	libc/stdio/sprintf.c, libc/stdio/tmpfile.c, libc/stdio/tmpnam.c,
-	libc/stdio/ungetc.c, libc/stdio/vfprintf.c, libc/stdio/vfprintf.h,
-	libc/stdio/vfscanf.c, libc/stdio/vprintf.c, libc/stdio/wsetup.c,
-	libc/stdlib/__adjust.c, libc/stdlib/__exp10.c,
-	libc/stdlib/assert.c, libc/stdlib/atexit.c, libc/stdlib/atol.c,
-	libc/stdlib/dtoa.c, libc/stdlib/ecvtbuf.c, libc/stdlib/malloc.c,
-	libc/stdlib/mprec.c, libc/stdlib/mprec.h, libc/stdlib/rand.c,
-	libc/stdlib/setenv.c, libc/stdlib/std.h, libc/stdlib/strtod.c,
-	libc/stdlib/strtol.c, libc/stdlib/strtoul.c, libc/string/strtok.c,
-	libc/time/asctime.c, libc/time/localtime.c, libc/time/mktime.c,
-	libc/time/strftime.c: modify to provide reentracy.
-
-	new routines:
-	strtok_r, asctime_r, fdopen_r, _cleanup_r, fopen_r, iprintf_r,
-	perror_r, printf_r, putchar_r, puts_r, scanf_r, sprintf_r,
-	tmpfile_r, vfiprintf_r, vfprintf_r, strtod_r, dtoa_r, rand_r,
-	srand_r, strtoul_r,strtol_r, free_r, malloc_r, morecore_r,
-	mstats_r, realloc_r, localeconv_r, setlocale_r
-
-Wed Feb 17 20:17:15 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* libc/include/machine/ieeefp.h, libc/include/machine/setjmp.h,
-	libc/include/sys/config.h, libc/include/sys/signal.h,
-	libc/include/sys/stat.h, libc/include/sys/types.h: For compiler
-	provided macros (such as m68000), use the ansi version
-	(__m68000__) so that the library can be used with code compiled
-	-ansi. In particular, m68000, mc68000, _AM29K, i386, MIPSEL, unix,
-	and sparc.
-
-Wed Feb 17 13:01:34 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-	* configure.in (sparc*): Don't set -fsoft-float for sparc
-	configurations.  Do set -fsoft-float for sparclite configurations.
-
-Fri Feb 12 16:25:52 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* default.menu, no-signal.menu: alternate forms of libc main menu
-          (in newlib rather than newlib/libc due to configuration restrictions)
-
-	* configure.in: select one of the two menus above, link to
-	libc.menu
-
-        * libc/libc.texinfo: include menu from separate file
-
-Fri Feb 12 12:50:06 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (FLAGS_TO_PASS): Put INSTALL back in.
-	(info): Split long shell command in half.
- 	* libc/Makefile.in (info, targetdep.tex): Don't pass everything to
-	sub-makes, just CHEW and TARGETDOC. 
-	(targetdep.tex): Removed now special handling of sys and machine
-	subdirectories, made obsolete some time ago.
-	* libc/machine/Makefile.in (doc): Don't pass everything to
-	sub-make, just CHEW and TARGETDOC.
-	(Makefile): New target.
-	* libc/sys/Makefile.in (Makefile): New target.
-
-Thu Feb 11 15:25:15 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (here and most subdirectories): Only pass down CHEW
-	and TARGETDOC when making info, not for other targets.
-
-	* Makefile.in (here and most subdirectories), host/any: Use $(AR)
-	$(AR_FLAGS) rather than $(ARUPDATE).
-
-Wed Feb 10 11:57:52 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Try to reduce command line length:
-	* Makefile.in (FLAGS_TO_PASS): don't pass down exec_prefix,
-	CC_FOR_BUILD, CFLAGS_FOR_BUILD, INSTALL or CHEW.
-	(info, docs): pass CC_FOR_BUILD and CFLAGS_FOR_BUILD to doc.
-	(info): Pass CHEW to other subdirs.
-
-Tue Feb  9 14:01:42 1993  Mark Eichin  (eichin@cygnus.com)
-
-	* configure.in: add signal_dir, like unix_dir, but by default it
-	is set to "signal" so that a29khif can turn it off (since a29khif
-	has raise() as part of machine-specific signal.s.)
-
-Fri Jan 15 12:09:50 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/sys/config.h, libc/machine/ieeefp.h: add Z8000 support
-	* libc/stdio/Makefile.in: pass CFLAGS so vfiprintf.c gets built
-	correctly.
-	* libc/stdio/fdopen.c, libc/stdio/fgets.c, libc/stdio/fscanf.c,
-	libc/stdio/vfprintf: type lint.
-	* libc/sys/z8ksim/crt0.c (start): Z8001/Z8002 independent
-	initialzation code.
-	* libc/sys/z8ksim/glue.c: Z8001/Z8002 clean system calls.
-
-Tue Dec 29 10:15:33 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* stub/mvme135/mvme135-asm.S: new file.
-	stub/mvme135mvme135-stub.c: moved all assembler routines into
-	mvme135-asm.S.
-	stub/mvme135/Makefile.in: build mvme135-stub.o.
-
-Mon Dec 28 12:40:43 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in: don't pass down $(CPP); use $(CC) -E in
-	sub-Makefiles instead, to try to avoid line length limitations.
-
-Mon Dec 21 18:36:13 1992  Per Bothner  (bothner@rtl.cygnus.com)
-
-	* libc/include/unistd.h (read, write):  Use void* instead of
-	char*.
-
-Thu Dec 17 13:49:46 1992  Mark Eichin  (eichin@cygnus.com)
-
-	* stub/go32/resetpc: sample script to send a reset packet to the
-	stub
-
-	* stub/go32/I386STUB.C: new file, gdb/i386stub.c modified for the
-	DOS environment, which compiles with Turbo C.
-
-	* stub/go32/DSER32.LNK: new file, linker commands for serial
-        remote stub.
-
-	* stub/go32/CONTROL.C: turn off debug_mode, add CYGNUS tag line to
-	start up message to identify version; call set_debug_traps.
-
-	* stub/go32/DEBUG.C: turn off debug_mode (so stub doesn't need any
-	keyboard interaction); call handle_exception() in go_til_stop,
-	rather than return, so that the remote stub gets control.
-
-	* stub/go32/MAKEFILE: fixed to actually use DOS commands (del and
-	rename, rather than mv), set flags that work with current Turbo C,
-	including using the /3 flag; also, add commands to build dser32.
-
-	* stub/go32/DEBUG32.LNK, stub/go32/GO32.LNK: fix paths to match
-	default Turbo C installation (\tc rather than \usr)
-
-	* stub/go32/MONO.C (printf): current Turbo C uses "..." instead of
-        "&..."
-
-Mon Dec 14 09:37:33 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/include/math.h: added _DOUBLE_IS_32BITS checks
-
-Thu Nov 12 22:31:04 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/stdio/cvt.c (licvt): new function to convert ints when
-	sizeof(int) != sizeof(long).
-
-	* libc/include/stdio.h: added prototype for iprintf.
-	* libc/include/machine/limits.h machine/ieeefp.h: z8k stuff
-
-Tue Nov 10 12:18:12 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/machine/m68k/setjmp.S: use __USER_LABEL_PREFIX__ and
-	__REGISTER_PREFIX__.
-
-Mon Nov  2 13:50:14 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/m68kbare: moved into stub directory.
-
-Mon Nov  2 13:40:42 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in, Makefile.in: created new directory stub, to hold
-	sample code for specific targets.
-
-Wed Oct 28 02:19:55 1992  Mark Eichin  (eichin@cygnus.com)
-
-	* restored libc/sys/go32/sys/fcntl.h, to override incorrect values
-	in the unified libc/include/sys/fcntl.h.
-
-Wed Oct 21 13:55:58 1992  Doug Evans  (dje@rtl.cygnus.com)
-
-	* libc/stdlib/ecvtbuf.c: (print_f,_gcvt): printf("%f", 0.01)
-	printed .01, not 0.01.
-
-Mon Oct 19 11:05:55 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: compile with -m68000 for m68* targets.
-
-Sun Oct 18 05:29:05 1992  Mark Eichin  (eichin@cygnus.com)
-
-	* libm/math/remainder.c (remainder): document the svr4 and sunos
-	references used to construct the function.
-
-Sat Oct 17 21:46:16 1992  Mark Eichin  (eichin@cygnus.com)
-
-	* libm/math/remainder.c (rint, remainder): fix old typos.
-	* libm/math/Makefile.in: actually build remainder.c (functions
-	rint and remainder, from SysVr4 Programmer's Guide floor(3m) man
-	page.)
-
-Thu Oct 15 07:48:05 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/string/bcopy.c: BSD version works on overlapping strings,
-	so ours should too.
-
-	* libc/stdlib/system.c: always invoke /bin/sh, not getenv
-	("SHELL").
-
-Wed Oct 14 11:07:11 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (docs): new target.
-
-Wed Oct 14 07:44:25 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/sys/times.h: define clock_t as required by POSIX.
-	libc/include/time.h: protect clock_t from multiple definitions.
-
-Wed Oct  7 11:02:21 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)
-
-	* libm/math/sqrt.h (sqrt): actually, the final version of fp-bit
-	does not need more than the original three iterations to get
-	within 1 ulp. (Paranoia tests for rounding to better than that,
-	but further iterations *don't* help, only more subtle changes
-	can.)
-
-Tue Oct  6 09:22:12 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/vxworks68, libc/sys/vxworks960: removed, since they
-	were doing nothing useful.
-
-Tue Oct  6 08:48:13 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: define MALLOC_PROVIDED for vxworks targets;
-	removed sys_dir settings of vxworks68 and vxworks960.
-	host/any: don't pass -nostdinc to gcc, since newlib no longer
-	provides all required header files.
-
-	* libc/stdlib/malloc.c: only compile this file if MALLOC_PROVIDED
-	is not defined; this provides a hook for VxWorks.
-
-Mon Oct  5 03:44:57 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)
-
-	* libc/stdio/setvbuf.c (setvbuf): while ANSI does say to malloc a
-	buffer if buf is NULL, don't do it here -- it is already being
-	done by makebuf elsewhere in stdio.
-
-Fri Oct  2 13:12:07 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/a29khif/Makefile.in: assemble Steve's list of stubs so
-	that C programs can call functions without using initial
-	underscores.
-
-Thu Oct  1 09:37:47 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/stdlib/abort.c (abort): call exit, in case kill returns.
-
-Wed Sep 30 08:22:18 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: set TARGET_CFLAGS for certain CPU types to
-	-msoft-float.
-
-Tue Sep 29 21:09:32 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* libc/sys/m68kbare/glue.c: use <_ansi.h> instead of <ansidecl.h>
-
-Mon Sep 28 14:58:44 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: added sys_dir m68kbare for m68k*-unknown-aout and
-	m68k*-unknown-coff.
-
-Fri Sep 25 08:33:21 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/stdio.h: define __need___va_list before including
-	<stdarg.h>, to avoid defining va_arg, et. al.
-
-Tue Sep 22 13:47:00 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/Makefile.in: handle the case of an empty $(sys_dir)
-	(don't cd to the user's home directory).
-
-	* libc/Makefile.in: replaced all instances of $(MAKE) with make.
-	In general this is the wrong thing to do, but I can't get around
-	GNU make's insistence on passing command line arguments any other
-	way.
-
-Tue Sep 22 10:12:44 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* configure.in: always configure the libc/sys directory, since it
-	now provides a required documentation file.
-
-	* Makefile.in: replaced all instances of $(MAKE) with make.  In
-	general this is the wrong thing to do, but I can't get around GNU
-	make's insistence on passing command line arguments any other way.
-
-Mon Sep 21 22:42:26 1992  Ian Lance Taylor  (ian@tweedledumbest.cygnus.com)
-
-	* libc/stdlib/ecvtbuf.c (_gcvt): string for 0 was not null
-	terminated.
-
-	* libc/stdio/local.h: include <stdarg.h> to define va_list.
-	libc/stdio/vsprintf.c: include <stdarg.h> rather than <varargs.h>.
-
-	* libc/include/float.h, libc/include/stdarg.h,
-	libc/include/stddef.h, libc/include/varargs.h: removed; use gcc
-	versions instead.
-	libc/include/stdio.h: get size_t from <stddef.h>, and va_list from
-	<stdarg.h>, not from <machine/types.h>.  Protect definition of
-	NULL.
-	libc/include/time.h: get size_t from stddef.h.  Protect definition
-	of NULL.
-	libc/include/machine/limits.h: override gcc <limits.h> by defining
-	_LIMITS_H___.  Don't define CLK_TCK.  Copied in gcc <limits.h> to
-	get correct INT_MIN and LONG_LONG values.
-	libc/include/machine/types.h: don't define ptrdiff_t, wchar_t,
-	size_t or va_list at all; they're now gotten from stddef.h
-	instead.
-	libc/include/machine/varargs.h: removed; use gcc version instead.
-	libc/include/sys/types.h: explicitly include <machine/types.h>.
-
-	* libm/math/sqrt.h: using the fp-bit routines appears to require
-	more iterations.
-
-	* Makefile.in, host/any: let system include files override machine
-	include files.
-
-Sat Sep 19 21:10:06 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)
-
-	* libc/include/machine/types.h: allow __*_TYPE__ from cpp to
-	override _*_T_ definitions defaulted here.
-
-Tue Sep 15 11:14:46 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (install): install the include files in
-	$(tooldir)/include, not $(exec_prefix)/include.
-
-Fri Sep 11 15:48:43 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (install): fixed typo, and changed install to not
-	force rebuild of libc.a and libm.a.
-
-Thu Sep 10 10:46:09 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/sys/a29khif/*: Changed all .include's to include
-	sys/sysmac.h, not plain sysmac.h.  The header files live in sys so
-	that they will be installed for the user.
-
-	* Makefile.in (all): create targ-include, a directory holding the
-	machine and system specific header files during the build.
-	(install): fixed installation of machine and system specific
-	header files.
-
-	* Makefile.in: fixed comment.
-	host/any: change .s.o rule to use $(AS) rather than $(CC), so that
-	we can pass $(INCLUDES) to it.
-
-Thu Sep 10 10:13:13 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/sys/param.h: new generic file, which may be
-	overridden for specific systems.
-
-	* libc/include/sys/signal.h: define all ANSI signal names, and
-	NSIG (which is not ANSI) for a29k.
-
-Tue Sep  8 09:04:30 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in: don't pass down arguments the lower level makes
-	will not need.
-	* libc/Makefile.in: recurse directly, rather than using subdir_do,
-	in hopes of avoiding argument length limits.
-	* libm/Makefile.in: recurse directly, rather using subdir_do, in
-	hopes of avoiding argument length limits.
-
-Tue Sep  8 08:27:22 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/sys/fcntl.h: include <sys/types.h> to ensure that
-	mode_t is defined.
-
-Mon Sep  7 14:02:07 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Fixed make info and make install-info for newlib, changing most
-	Makefile.in and several *.tex files.  Moved doc directory from
-	libc to top level.
-
-	* libc/time/mktime.c (_DAYS_IN_MONTH): actually, not const.
-	Should be rewritten.
-
-	* libc/string/strings.tex: renamed node index to node index
-	function, so that it does not conflict with the top level index
-	node.
-
-	* libc/include/sys/config.h: define __IEEE_BIG_ENDIAN for h8300.
-
-Fri Sep  4 02:34:06 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Overhauled general configuration for newlib.  Eliminated all
-	target dependent Makefile fragments.  Create libraries in newlib
-	rather than newlib/libc and newlib/libm.  Use CC, et. al., rather
-	than CROSS_CC, et. al.  Broke make docs; will fix later.
-
-	* libc/time/localtime.c (_DAYS_IN_MONTH): actually, not const.
-	Should be rewritten.
-
-Tue Sep  1 15:21:14 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/configure.in: cleaned up somewhat; switch on ${target}
-	rather than ${target_alias}.
- 	* libm/configure.in: cleaned up somewhat; switch on ${target}
-	rather than ${target_alias}.
-
-	* libc/ctype/ctype_.c: marked _ctype_ array _CONST.
-	* libc/include/ctype.h: marked _ctype_ as _CONST.
-
-	* libc/locale/locale.c (lconv, localeconv): marked static lconv as
-	_CONST.
-
-	* libc/stdio/cvt.c, libc/stdio/findfp.c (__sfmoreglue),
-	libc/stdio/vfscanf.c (__svfscanf): made static variables const.
-	libc/stdio/gets.c (gets): removed non-ANSI warning message.
-	libc/stdio/tmpnam.c (tmpnam): removed unneeded filename variable.
-
-	* libc/stdlib/mprec.h, libc/stdlib/mprec.c (pow5mult, tens,
-	bigtens, tinytens): marked arrays _CONST.
-	libc/stdlib/qsort.c (swap): if __GNUC__, use _builtin_alloca
-	rather than a static variable.
-
-	* libc/time/asctime.c (asctime), libc/time/localtime.c
-	(_DAYS_IN_MONTH), libc/time/mktime.c (_DAYS_IN_MONTH,
-	_DAYS_BEFORE_MONTH), libc/time/strftime.c (dname_len, dname,
-	mname_len, mname): Marked static arrays _CONST.
-
-	* libm/math/gamma.h: made local variables non-static.
-
-	* libm/math/acos.h, libm/math/bessel.c, libm/math/erf.c,
-	libm/math/exp.c, libm/math/gamma.h: marked static arrays as
-	_CONST.
-
-	* libm/math/constants.c: removed file, because the constants it
-	defined were never referenced.
-	libm/math/Makefile.in: removed references to constants.c.
-	libm/math/mathimpl.h: removed declarations of constants.
-
-Wed Aug 26 21:09:06 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/include/machine/varargs.h: only call __builtin_saveregs if
-	it is sensibly defined in libgcc2.  Checks preprocessor defines,
-	which is not a good solution.
-
-	* libm/sqrt.c: sqrt(Infinity) should not be a domain error.
-
-	* libm/frexp.c: handle denormalized numbers as arguments.
-
-	* libm/math/Makefile.in: added some dependencies for .c files
-	which include local .h files.
-
-Mon Aug 24 12:57:58 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-	* libc/configure.in: set target_alias for OSE*.  Replace
-	target_makefile_frag if it is blank.
-
-	* libc/Makefile.in: make sure everything is passed to subsidiary
-	makes; create all directories when installing.
-
-	* libm/ieeefp/Makefile.in, libm/math/Makefile.in: use
-	CROSS_ARUPDATE instead of AR.
-
-	* libm/configure.in: set target_alias for OSE*.  Replace
-	target_makefile_frag if it is blank.
-
-	* libm/Makefile.in: make sure everything is passed to subsidiary
-	makes; create all directories when installing.
-
-Thu Aug 20 15:11:51 1992  Mark Eichin  (eichin@cygnus.com)
-
-        * add following change from libc copy.
-
-Wed Aug 19 18:54:49 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/libc.texinfo: make copyright disclaimers appear on back of
-	title page; make format of same slightly less ugly; avoid using
-	underbars in section headings (avoids nasty texinfo bug in table
-	of contents).
-
-	* libc/ctype/tolower.c, libc/ctype/toupper.c: (doc changes in
-	  comments only) avoid using underbars in section headings
-
-	* libc/ieeefp/ieeefp.tex: include doc from fpsticky, infinity,
-	  isnan ieeefp/fpmask.c, ieeefp/fpround.c, ieeefp/fpsticky.c (doc
-	  changes in comments only): shorten headings ieeefp/infinity.c,
-	  ieeefp/isnan.c: (doc, comments only) more informative headings
-
-	* libc/math/bessel.c: (doc, comments only) shorten heading
-
-	* libc/stdlib/efgcvt.c, libc/stdlib/mbtowc.c, libc/stdlib/wctomb.c
-	(doc, comments only) shorten headings
-
-	* libc/time/localtime.c (doc, comments only): shorten headings
-
-	* libm/ieeefp/ieeefp.tex: include doc from fpsticky, infinity,
-	  isnan
-	  libm/ieeefp/fpmask.c, libm/ieeefp/fpround.c,
-	  libm/ieeefp/fpsticky.c (doc changes in comments only): shorten
-	  headings
-	  libm/ieeefp/infinity.c, libm/ieeefp/isnan.c: (doc, comments
-	  only) more informative headings
-	* libm/math/bessel.c: (doc, comments only) shorten heading
-
-Wed Aug 19 07:06:37 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)
-
-	* .../Makefile.in: use CROSS_ARUPDATE consistently.
-	* config/*.mt: define CROSS_AR as well as CROSS_ARUPDATE
-	* config/*.mt: define CROSS_CPP based on CROSS_CC, not /lib/cpp.
-	* .../Makefile.in: get rid of .c.o rule - if TOP is correctly
-	defined, the one from the .mt file will be correct.
-	* libc/include/machine, libc/include/sys: created, and populated
-	with common files from machine/*/machine. ifdefs were used for
-	most, typically by handling exceptions first and then filling in
-	defaults. Files with D.J. Delorie copyright #included rather than
-	copied. Most files in include/sys really were the same in the
-	original.
-	* libc/include/...: cleaned up use of _EXFUN.
-	* libc/stdlib/mprec.c: mprec.h doesn't get installed, so include
-	it with double quotes, not angles.
-
-Mon Aug 10 11:43:20 1992  Ian Lance Taylor  (ian@dumbest.cygnus.com)
-
-	* libc/Makefile.in: always create installation directories.
-
-Sun Aug  9 22:45:48 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* libc/configure.in: handle host properly (using canonical
-	triples), better error message for the case of target not found
-
-Thu May 28 01:56:37 1992  Michael Tiemann  (tiemann@rtl.cygnus.com)
-
-	* libc/Makefile.in (insincdir): Ensure this directory exists
-	before attempting installation.
-
-Fri May  1 18:16:42 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/stdlib/assert.c: now calls abort like it should
-	* libc/sys/a29khif: many many patches for 29khif work
-	* libc/machine/i386: gnulib2 expanded there.
-
-Tue Apr 28 19:08:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-        Added accurate fp conversion routines to stdlib, moved dcvt from
-	stdio to stdlib and called it ecvtbuf:
-	* libc/stdlib/mprec.c, mprec.h: new files for multiprec arithmetic
-	* libc/stdlib/Makefile.in, efgcvt.c, strtod.c: modified to use new
-	routines
-	* libc/libc.texinfo: Modifed to include the copyright info from
-	the mprec files
-	* libc/stdlib/efgcvt.c: now xref to ecvtbuf in stdlib.
-	* libc/test/ : many vector which tested for the implementation
-	defined returns of strange conversion requests have been updated
-	to relflect the new implementation
-
-Mon Apr 27 13:41:33 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/libc.texinfo: new chapter on variable arg lists
-	(stdarg.h/varargs.h)
-	* libc/libc.texinfo: new title
-	* libc/time/gmtime.c, libc/time/localtime./c, libc/time/mktime.c:
-	(doc only) shorter headings for better formatting.
-
-Fri Apr 24 11:26:48 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/libc.texinfo: three more info menu entries
-	* libc/locale/locale.tex: new chapter
-	* libc/locale/locale.c: new doc for setlocale, localeconv
-	* libc/locale/Makefile.in: use new locale doc
-	* libc/signal/signal.tex: new chapter
-	* libc/signal/raise.c, libc/signal/signal.c: new doc
-	* libc/signal/Makefile.in: use new doc
-	* libc/time/time.tex: new chapter
-	* libc/time/asctime.c libc/time/clock.c libc/time/ctime.c
-	libc/time/difftime.c libc/time/gmtime.c libc/time/localtime.c
-	libc/time/mktime.c libc/time/strftime.c libc/time/time.c: new doc
-	* libc/time/Makefile.in: use new doc
-
-Tue Apr 21 14:48:50 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libm/math/log1p.c: split to use the new function way of float
-	function definition. math/log1p.h deleted
-	* libm/math/scalb.c: obsolete and deleted
-	* libm/math/scalbn.c: created from part log1p.c
-	* libm/math/Makefile.in: know about log1p and scalbn
-
-Tue Apr 21 12:32:21 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/ctype/isupper.c: revise doc;
-	  libc/ctype/ctype.tex: use doc from isupper.c
-
-	* libc/string/bzero.c: new doc
-
-Mon Apr 20 14:19:42 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
-
-	* libc/stdlib/system.c, libc/stdlib/exit.c, libc/stdlib/abort.c:
-	new doc
-	* libc/stdlib/Makefile.in: extract new doc
-	* libc/stdlib/stdlib.tex: use new doc
-
-	* libc/string/strerror.c: expanded doc.
-
-	* libc/stdio/Makefile.in: extract doc from more files
-	* libc/stdio/fopen.c, libc/stdio/perror.c, libc/stdio/remove.c,
-	libc/stdio/rename.c, libc/stdio/rewind.c, libc/stdio/setbuf.c,
-	libc/stdio/setvbuf.c, libc/stdio/sprintf.c, libc/stdio/tmpfile.c,
-	libc/stdio/tmpnam.c, libc/stdio/vfprintf.c, libc/stdio/vprintf.c,
-	libc/stdio/vsprintf.c: new doc
-	* libc/stdio/stdio.tex: use new doc
-
-Mon Apr 20 09:38:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	* libc/config/ebmon29k: added CROSS_CPP rule and other fixes
-	* libc/include/ieeefp.h: fixed ansi conflict with isnanf, isinff,
-	finitef functions.
-	* libc/sys/a29khif/sys/*.h: ansidecl.h was renamed to _ansi.h some
-	time ago.
-
-	* libc/stdio/stdio.h: added P_tmpdir for /tmp (SVID thing)
-	* libc/stdio/setbuf.c: added ansi style definition.
-	* libc/stdio/setvbuf.c: added ansi definition, now mallocs own
-	buffer if none provided.
-	* libc/stdio/tmpfile.c: lint
-	* libc/stdio/tmpnam.c (worker): created. (tmpnam): mallocs buffer
-	rather than using static, also make sure file isn't already
-	present.  Uses P_tmpdir. (tempnam): rewritten to use new
-	subroutine, and uses P_tmpdir.
-	* libc/stdio/siprintf.c: created
-
-Mon Apr 13 09:12:58 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-	Release 1.03 for NEC, major mods. Main differences from release
-	1.02::
-
-	More tests in test/:
-	* jn_vec.c, jnf_vec.c, yn_vec.c, ynf_vec.c, log2_vec.c,
-	log2f_vec.c, atan2_vec.c, atan2f_vec.c: new test vectors.
-	* test_ieee.c: tests for ieee flags & masks - get/set rounding,
-	get/set mask, get/set sticky and get/set roundtoi.  Tests
-	that setting the bits changes the way arithmetic is done.
-	* string.c: added test to make sure memcmp does it with unsigned
-	chars.
-	* test.c: cleaned up and removed lint.
-	* sprint_vec, sprint_ivec.c, convert.c, conv_vec.c, iconf_vec.c,
-	dvec.c: tests for string to value conversions,  sprintf, scanf,
-	atof, atoff, strtod, strtodf, atoi, atol, strtol, ecvtbuf, ecvt,
-	ecvtf,	fcvtbuf, fcvt, fcvtf, gcvt, gcvtf.  Some attention paid to
-	rounding in sprintf too.
-	* test_is.c: tests for  isalnum, isalpha, isascii, iscntrl,
-	isdigit, isgraph, islower, isprint, ispunct, isspace, isupper,
-	isxdigit, toascii, tolower, toupper, _tolower, _toupper in macro
-	and function form.
-	* math2.c: test for frexp, frexpf, ldexp, ldexpf, modf modff, pow,
-	powf
-
-	In the library:
-	* libc/stdlib/div.c, libc/stdlib/ldiv.c, libc/stdlib/strtod.c,
-	libc/stdlib/strtol.c, libc/stdlib/stroul.c, libc/stdlib/abs.c,
-	libc/stdlib/bsearch.c, libc/stdlib/calloc.c, libc/stdlib/getenv.c,
-	libc/stdlib/labs.c, libc/stdlib/malloc.c: new documentation
-	* libc/stdlib/efgcvt.c: rewritten to use new _dcvt routines rather
-	than sprintf.
-	* libc/stdio/dcvt.c: rewritten to make more useful elsewhere. 
-	* Method of producting float versions of double functions has
-	changed, functions will be modified gradually. So far:
-	libm/math/exp.c, libm/math/pow.c, libm/math/modf.c,
-	libm/math/sincos.c, libm/math/fmod.c, libm/math/tan.c have been
-	altered
-	* libc/string/memcmp.c: now uses unsigned chars
-	* libc/string/bcmp.c, libc/string/strcpy.c,
-	libc/stsring/strxfrm.c: fixed doc
-	* libc/sys/sysvnecv70.tex: fix example of sbrk code
-
-Local Variables:
-version-control: never
-End:
diff --git a/newlib/MAINTAINERS b/newlib/MAINTAINERS
deleted file mode 100644
index b2c4e48e1..000000000
--- a/newlib/MAINTAINERS
+++ /dev/null
@@ -1,38 +0,0 @@
-			 Newlib Maintainers
-
-
-		      Blanket Write Privileges
-
-The official maintainers of newlib:
-
-Jeff Johnston			jjohnstn@redhat.com
-
-
-		     Various Domain Maintainers
-
-This is a list of maintainers who look after specific domains of newlib.
-Individuals who maintain parts of newlib need approval to check in changes
-outside of the immediate domain that they maintain.
-
-If there is no maintainer for a given domain then the responsibility
-falls to the head maintainers.
-
-If there are several maintainers for a given domain then
-responsibility falls to the first maintainer.  The first maintainer is
-free to devolve that responsibility among the other maintainers.
-
-Makefile.in, configure*:	jjohnstn@redhat.com
-
-Cygwin:				cgf@redhat.com
-
-Web pages:			jjohnstn@redhat.com
-
-
-
-			Write After Approval
-
-These are users with general write privileges after getting approval:
-
-DJ Delorie			dj@redhat.com
-Christopher G. Faylor		cgf@redhat.com
-Jim Wilson			wilson@specifixinc.com
diff --git a/newlib/Makefile.am b/newlib/Makefile.am
deleted file mode 100644
index f1539fcbe..000000000
--- a/newlib/Makefile.am
+++ /dev/null
@@ -1,371 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus dejagnu
-
-# Multilib support variables.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-LIBTOOL_VERSION_INFO = 0:0:0
-
-if NEWLIB_HW_FP
-MATHDIR = mathfp
-else
-MATHDIR = math
-endif
-
-# Work around what appears to be a GNU make bug handling MAKEFLAGS
-# values defined in terms of make variables, as is the case for CC and
-# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
-	"AR_FLAGS=$(AR_FLAGS)" \
-	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
-	"CFLAGS=$(CFLAGS)" \
-	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
-	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"LDFLAGS=$(LDFLAGS)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
-	"MAKE=$(MAKE)" \
-	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
-	"PICFLAG=$(PICFLAG)" \
-	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
-	"SHELL=$(SHELL)" \
-	"EXPECT=$(EXPECT)" \
-	"RUNTEST=$(RUNTEST)" \
-	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-	"exec_prefix=$(exec_prefix)" \
-	"infodir=$(infodir)" \
-	"libdir=$(libdir)" \
-	"prefix=$(prefix)" \
-	"tooldir=$(tooldir)" \
-	"top_toollibdir=$(toollibdir)" \
-	"AR=$(AR)" \
-	"AS=$(AS)" \
-	"CC=$(CC_FOR_NEWLIB)" \
-	"LD=$(LD)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"NM=$(NM)" \
-	"PICFLAG=$(PICFLAG)" \
-	"RANLIB=$(RANLIB)" \
-	"DESTDIR=$(DESTDIR)"
-
-FLAGS_TO_PASS=$(AM_MAKEFLAGS)
-
-if HAVE_DOC
-DOCDIR = doc
-else
-DOCDIR =
-endif
-
-SUBDIRS = libc libm \
-	$(DOCDIR) . $(EXTRA_DIRS)
-
-tooldir = $(exec_prefix)/$(host_alias)
-toollibdir = $(tooldir)/lib$(MULTISUBDIR)
-
-AR_FLAGS = rc
-
-if USE_LIBTOOL
-toollib_LTLIBRARIES = libm.la \
-	libc.la
-else
-toollib_LIBRARIES = libm.a \
-	libc.a
-endif
-
-noinst_DATA = stmp-targ-include
-
-toollib_DATA = $(CRT0) $(CRT1)
-
-
-# The functions ldexp, frexp and modf are traditionally supplied in
-# both libc.a and libm.a.  We build them in libm.a and copy them over,
-# along with some required supporting routines.
-MATHOBJS_IN_LIBC = \
-	s_isinf.$(oext) sf_isinf.$(oext) \
-	s_isnan.$(oext) sf_isnan.$(oext) \
-	s_ldexp.$(oext) sf_ldexp.$(oext) \
-	s_frexp.$(oext) sf_frexp.$(oext) \
-	s_modf.$(oext) \
-	sf_modf.$(oext) s_scalbn.$(oext) \
-	sf_scalbn.$(oext) \
-	s_finite.$(oext) sf_finite.$(oext) \
-	s_copysign.$(oext) sf_copysign.$(oext) \
-	s_infconst.$(oext)
-
-LIBC_OBJECTLISTS = \
-	$(POSIX_OBJECTLIST) \
-	$(SIGNAL_OBJECTLIST) \
-	$(SYSCALL_OBJECTLIST) \
-	$(UNIX_OBJECTLIST) \
-	$(STDIO64_OBJECTLIST) \
-	libc/argz/objectlist.awk.in \
-	libc/stdlib/objectlist.awk.in \
-	libc/time/objectlist.awk.in \
-	libc/ctype/objectlist.awk.in \
-	libc/search/objectlist.awk.in \
-	libc/string/objectlist.awk.in \
-	libc/locale/objectlist.awk.in \
-	libc/misc/objectlist.awk.in \
-	libc/reent/objectlist.awk.in \
-	libc/errno/objectlist.awk.in \
-	libc/stdio/objectlist.awk.in \
-	$(MACHINE_OBJECTLIST) \
-	$(SYS_OBJECTLIST) \
-	$(SYS_MACH_OBJECTLIST)
-
-LIBM_OBJECTLISTS = \
-	libm/$(MATHDIR)/objectlist.awk.in \
-	libm/common/objectlist.awk.in \
-	$(LIBM_MACHINE_OBJECTLIST)
-
-libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -objectlist libm-libtool-objectlist
-
-libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -objectlist libc-libtool-objectlist
-
-if USE_LIBTOOL
-libm_la_SOURCES =
-libm_la_DEPENDENCIES = libm-libtool-objectlist
-
-# objects listed later in LIBM_OBJECTLISTS will override those listed earlier
-libm-libtool-objectlist: $(LIBM_OBJECTLISTS)
-	cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@
-
-libc_la_SOURCES =
-libc_la_DEPENDENCIES = libc-libtool-objectlist
-
-# objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier
-libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS)
-	cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) |  $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@
-
-else
-
-libc.a: libc/libc.a libm.a
-	rm -rf libc.a libg.a tmp
-	mkdir tmp
-	cd tmp; \
-	 $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \
-	 $(AR) x ../libc/libc.a ; \
-	 $(AR) $(AR_FLAGS) ../$@ *.o
-	$(RANLIB) libc.a
-	ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a
-	rm -rf tmp
-
-libc/libc.a: ; @true
-
-libm.a: libm/libm.a
-	rm -f $@
-	ln libm/libm.a $@ >/dev/null 2>/dev/null || cp libm/libm.a $@
-
-libm/libm.a: ; @true
-
-endif # USE_LIBTOOL
-
-crt0.o: $(CRT0_DIR)$(CRT0)
-	rm -f $@
-	ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(CRT0_DIR)$(CRT0) $@
-
-$(CRT0_DIR)$(CRT0): ; @true
-
-crt1.o: $(CRT1_DIR)$(CRT1)
-	rm -f $@
-	ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(CRT0_DIR)$(CRT0) $@
-
-$(CRT1_DIR)$(CRT1): ; @true
-
-
-all-recursive: stmp-targ-include
-
-# The targ-include directory just holds the includes files for the
-# particular system and machine we have been configured for.  It is
-# used while building.
-stmp-targ-include: config.status
-	-rm -rf targ-include stmp-targ-include
-	mkdir targ-include targ-include/sys targ-include/machine
-	cp newlib.h targ-include/newlib.h
-	-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/sys/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	touch $@
-
-CLEANFILES = targ-include stmp-targ-include
-
-install-data-local:	install-toollibLIBRARIES
-if USE_LIBTOOL
-else
-	rm -f $(DESTDIR)$(toollibdir)/libg.a
-	ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a
-endif
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
-	-if [ -z "$(MULTISUBDIR)" ]; then \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
-	  for i in $(srcdir)/libc/include/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
-	  done; \
-	  $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \
-	  for i in $(srcdir)/libc/include/machine/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	  done; \
-	  for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done; \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
-	  for i in $(srcdir)/libc/include/sys/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
-	  done; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	else true; fi
-
-# Force makedoc to be built before building info files.
-info-recursive: doc/makedoc
-dvi-recursive: doc/makedoc
-doc/makedoc:
-	cd doc && $(MAKE) all
-
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-# Multilib support.
-.PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \
-	maintainer-clean-multi
-
-all-recursive: all-multi
-check-recursive: check-multi
-mostlyclean-recursive: mostlyclean-multi
-clean-recursive: clean-multi
-distclean-recursive: distclean-multi
-maintainer-clean-recursive: maintainer-clean-multi
-
-# The $(MAKE) comments below are to enable parallel building.
-all-multi:
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
-check-multi:
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE)
-mostlyclean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
-clean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
-distclean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
-maintainer-clean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
-
-MAKEOVERRIDES=
-
-# dejagnu support
-
-RUNTESTFLAGS=
-
-site.exp: Makefile
-	@echo 'Making a new site.exp file...'
-	@test ! -f site.bak || rm -f site.bak
-	@echo '## these variables are automatically generated by make ##' > $@-t
-	@echo '# Do not edit here.  If you wish to override these values' >> $@-t
-	@echo '# edit the last section' >> $@-t
-	@echo 'set tool $(DEJATOOL)' >> $@-t
-	@echo 'set tool_version $(VERSION)' >> $@-t
-	@echo 'set srcdir $(srcdir)/testsuite' >> $@-t
-	@echo 'set objdir' `pwd` >> $@-t
-	@echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t
-	@echo 'set host_alias $(build_alias)' >> $@-t
-	@echo 'set host_triplet $(build_triplet)' >> $@-t
-	@echo 'set target_alias $(host_alias)' >> $@-t
-	@echo 'set target_triplet $(host_triplet)' >> $@-t
-	@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
-	@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
-	@test ! -f site.exp || mv site.exp site.bak
-	@mv $@-t site.exp
-
-check-DEJAGNU: site.exp
-	@if [ -d testsuite ] ; then \
-	  true ; \
-	else \
-	  mkdir testsuite ; \
-	fi
-	@rm -f testsuite/site.exp
-	@cp site.exp testsuite/site.exp
-	@rootme=`pwd` ; \
-	export rootme ; \
-	srcdir=`cd ${srcdir}; pwd` ; \
-	export srcdir ; \
-	EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \
-	          echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \
-	        else \
-	          echo expect ; \
-	        fi` ; \
-	export EXPECT ; \
-	echo "Found expect: $${EXPECT}" ; \
-	if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \
-	  TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \
-	  export TCL_LIBRARY ; \
-	  echo "Found TCL library directory: $${TCL_LIBRARY}" ; \
-	fi ; \
-	RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
-	           echo $${srcdir}/../dejagnu/runtest ; \
-	         else \
-	           echo runtest ; \
-	         fi` ; \
-	export RUNTEST ; \
-	echo "Found runtest: $${RUNTEST}" ; \
-	cd testsuite ; \
-	if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \
-	   $$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \
-	   : ; \
-	else \
-	   echo "WARNING: could not find \`runtest'" 1>&2 ; \
-	fi
diff --git a/newlib/Makefile.in b/newlib/Makefile.in
deleted file mode 100644
index 1a9b7e07b..000000000
--- a/newlib/Makefile.in
+++ /dev/null
@@ -1,938 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CC_FOR_BUILD = @CC_FOR_BUILD@
-CC_FOR_NEWLIB = @CC_FOR_NEWLIB@
-CPP = @CPP@
-CRT0 = @CRT0@
-CRT0_DIR = @CRT0_DIR@
-CRT1 = @CRT1@
-CRT1_DIR = @CRT1_DIR@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-EXTRA_DIRS = @EXTRA_DIRS@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBM_MACHINE_OBJECTLIST = @LIBM_MACHINE_OBJECTLIST@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MACHINE_OBJECTLIST = @MACHINE_OBJECTLIST@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-POSIX_OBJECTLIST = @POSIX_OBJECTLIST@
-RANLIB = @RANLIB@
-SIGNAL_OBJECTLIST = @SIGNAL_OBJECTLIST@
-STDIO64_OBJECTLIST = @STDIO64_OBJECTLIST@
-STRIP = @STRIP@
-SYSCALL_OBJECTLIST = @SYSCALL_OBJECTLIST@
-SYS_MACH_OBJECTLIST = @SYS_MACH_OBJECTLIST@
-SYS_OBJECTLIST = @SYS_OBJECTLIST@
-UNIX_OBJECTLIST = @UNIX_OBJECTLIST@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus dejagnu
-
-# Multilib support variables.
-MULTISRCTOP = 
-MULTIBUILDTOP = 
-MULTIDIRS = 
-MULTISUBDIR = 
-MULTIDO = true
-MULTICLEAN = true
-
-LIBTOOL_VERSION_INFO = 0:0:0
-@NEWLIB_HW_FP_TRUE@MATHDIR = @NEWLIB_HW_FP_TRUE@mathfp
-@NEWLIB_HW_FP_FALSE@MATHDIR = @NEWLIB_HW_FP_FALSE@math
-
-# Work around what appears to be a GNU make bug handling MAKEFLAGS
-# values defined in terms of make variables, as is the case for CC and
-# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
-	"AR_FLAGS=$(AR_FLAGS)" \
-	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
-	"CFLAGS=$(CFLAGS)" \
-	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
-	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"LDFLAGS=$(LDFLAGS)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
-	"MAKE=$(MAKE)" \
-	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
-	"PICFLAG=$(PICFLAG)" \
-	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
-	"SHELL=$(SHELL)" \
-	"EXPECT=$(EXPECT)" \
-	"RUNTEST=$(RUNTEST)" \
-	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-	"exec_prefix=$(exec_prefix)" \
-	"infodir=$(infodir)" \
-	"libdir=$(libdir)" \
-	"prefix=$(prefix)" \
-	"tooldir=$(tooldir)" \
-	"top_toollibdir=$(toollibdir)" \
-	"AR=$(AR)" \
-	"AS=$(AS)" \
-	"CC=$(CC_FOR_NEWLIB)" \
-	"LD=$(LD)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"NM=$(NM)" \
-	"PICFLAG=$(PICFLAG)" \
-	"RANLIB=$(RANLIB)" \
-	"DESTDIR=$(DESTDIR)"
-
-
-FLAGS_TO_PASS = $(AM_MAKEFLAGS)
-@HAVE_DOC_TRUE@DOCDIR = @HAVE_DOC_TRUE@doc
-@HAVE_DOC_FALSE@DOCDIR = 
-
-SUBDIRS = libc libm \
-	$(DOCDIR) . $(EXTRA_DIRS)
-
-
-tooldir = $(exec_prefix)/$(host_alias)
-toollibdir = $(tooldir)/lib$(MULTISUBDIR)
-
-AR_FLAGS = rc
-
-@USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = @USE_LIBTOOL_TRUE@libm.la \
-@USE_LIBTOOL_TRUE@	libc.la
-@USE_LIBTOOL_FALSE@toollib_LIBRARIES = @USE_LIBTOOL_FALSE@libm.a \
-@USE_LIBTOOL_FALSE@	libc.a
-
-noinst_DATA = stmp-targ-include
-
-toollib_DATA = $(CRT0) $(CRT1)
-
-# The functions ldexp, frexp and modf are traditionally supplied in
-# both libc.a and libm.a.  We build them in libm.a and copy them over,
-# along with some required supporting routines.
-MATHOBJS_IN_LIBC = \
-	s_isinf.$(oext) sf_isinf.$(oext) \
-	s_isnan.$(oext) sf_isnan.$(oext) \
-	s_ldexp.$(oext) sf_ldexp.$(oext) \
-	s_frexp.$(oext) sf_frexp.$(oext) \
-	s_modf.$(oext) \
-	sf_modf.$(oext) s_scalbn.$(oext) \
-	sf_scalbn.$(oext) \
-	s_finite.$(oext) sf_finite.$(oext) \
-	s_copysign.$(oext) sf_copysign.$(oext) \
-	s_infconst.$(oext)
-
-
-LIBC_OBJECTLISTS = \
-	$(POSIX_OBJECTLIST) \
-	$(SIGNAL_OBJECTLIST) \
-	$(SYSCALL_OBJECTLIST) \
-	$(UNIX_OBJECTLIST) \
-	$(STDIO64_OBJECTLIST) \
-	libc/argz/objectlist.awk.in \
-	libc/stdlib/objectlist.awk.in \
-	libc/time/objectlist.awk.in \
-	libc/ctype/objectlist.awk.in \
-	libc/search/objectlist.awk.in \
-	libc/string/objectlist.awk.in \
-	libc/locale/objectlist.awk.in \
-	libc/misc/objectlist.awk.in \
-	libc/reent/objectlist.awk.in \
-	libc/errno/objectlist.awk.in \
-	libc/stdio/objectlist.awk.in \
-	$(MACHINE_OBJECTLIST) \
-	$(SYS_OBJECTLIST) \
-	$(SYS_MACH_OBJECTLIST)
-
-
-LIBM_OBJECTLISTS = \
-	libm/$(MATHDIR)/objectlist.awk.in \
-	libm/common/objectlist.awk.in \
-	$(LIBM_MACHINE_OBJECTLIST)
-
-
-libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -objectlist libm-libtool-objectlist
-
-libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -objectlist libc-libtool-objectlist
-
-@USE_LIBTOOL_TRUE@libm_la_SOURCES = 
-@USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@libm-libtool-objectlist
-
-@USE_LIBTOOL_TRUE@libc_la_SOURCES = 
-@USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@libc-libtool-objectlist
-
-CLEANFILES = targ-include stmp-targ-include
-
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-MAKEOVERRIDES = 
-
-# dejagnu support
-
-RUNTESTFLAGS = 
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
-CONFIG_HEADER = newlib.h
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(toollib_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-libm_a_LIBADD = 
-libm_a_SOURCES = libm.a.c
-libm_a_OBJECTS =  libm.a.$(OBJEXT)
-libc_a_LIBADD = 
-libc_a_SOURCES = libc.a.c
-libc_a_OBJECTS =  libc.a.$(OBJEXT)
-LTLIBRARIES =  $(toollib_LTLIBRARIES)
-
-libm_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libm_la_OBJECTS = 
-libc_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libc_la_OBJECTS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA) $(toollib_DATA)
-
-DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
-NEWS acinclude.m4 aclocal.m4 configure configure.in newlib.hin
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-DIST_SUBDIRS =  libc libm doc . @EXTRA_DIRS@
-EXPECT = `if test -f $(top_builddir)/../expect/expect; then echo $(top_builddir)/../expect/expect; else echo expect; fi`
-RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then echo $(top_srcdir)/../dejagnu/runtest; else echo runtest; fi`
-SOURCES = libm.a.c libc.a.c $(libm_la_SOURCES) $(libc_la_SOURCES)
-OBJECTS = libm.a.$(OBJEXT) libc.a.$(OBJEXT) $(libm_la_OBJECTS) $(libc_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-newlib.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
-stamp-h: $(srcdir)/newlib.hin $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=newlib.h:newlib.hin \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/newlib.hin: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f newlib.h
-
-maintainer-clean-hdr:
-
-mostlyclean-toollibLIBRARIES:
-
-clean-toollibLIBRARIES:
-	-test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES)
-
-distclean-toollibLIBRARIES:
-
-maintainer-clean-toollibLIBRARIES:
-
-install-toollibLIBRARIES: $(toollib_LIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
-	@list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-	@$(POST_INSTALL)
-	@list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(RANLIB) $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(RANLIB) $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-toollibLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(toollibdir)/$$p; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-mostlyclean-toollibLTLIBRARIES:
-
-clean-toollibLTLIBRARIES:
-	-test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)
-
-distclean-toollibLTLIBRARIES:
-
-maintainer-clean-toollibLTLIBRARIES:
-
-install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
-	@list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-toollibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(toollibdir)/$$p; \
-	done
-
-libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES)
-	$(LINK) -rpath $(toollibdir) $(libm_la_LDFLAGS) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS)
-
-libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES)
-	$(LINK) -rpath $(toollibdir) $(libc_la_LDFLAGS) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS)
-
-install-toollibDATA: $(toollib_DATA)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
-	@list='$(toollib_DATA)'; for p in $$list; do \
-	  if test -f $(srcdir)/$$p; then \
-	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(toollibdir)/$$p; \
-	  else if test -f $$p; then \
-	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p; \
-	  fi; fi; \
-	done
-
-uninstall-toollibDATA:
-	@$(NORMAL_UNINSTALL)
-	list='$(toollib_DATA)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(toollibdir)/$$p; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" != "." || dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)newlib.hin$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags newlib.hin $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(DIST_SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-
-DEJATOOL = $(PACKAGE)
-
-RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-all-recursive-am: newlib.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am: install-toollibLIBRARIES install-toollibLTLIBRARIES \
-		install-toollibDATA install-data-local
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-toollibLIBRARIES uninstall-toollibLTLIBRARIES \
-		uninstall-toollibDATA
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) newlib.h
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(toollibdir) $(DESTDIR)$(toollibdir) \
-		$(DESTDIR)$(toollibdir)
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-toollibLIBRARIES \
-		mostlyclean-compile mostlyclean-libtool \
-		mostlyclean-toollibLTLIBRARIES mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-hdr clean-toollibLIBRARIES clean-compile clean-libtool \
-		clean-toollibLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-hdr distclean-toollibLIBRARIES \
-		distclean-compile distclean-libtool \
-		distclean-toollibLTLIBRARIES distclean-tags \
-		distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr \
-		maintainer-clean-toollibLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-toollibLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-toollibLIBRARIES distclean-toollibLIBRARIES \
-clean-toollibLIBRARIES maintainer-clean-toollibLIBRARIES \
-uninstall-toollibLIBRARIES install-toollibLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool mostlyclean-toollibLTLIBRARIES \
-distclean-toollibLTLIBRARIES clean-toollibLTLIBRARIES \
-maintainer-clean-toollibLTLIBRARIES uninstall-toollibLTLIBRARIES \
-install-toollibLTLIBRARIES uninstall-toollibDATA install-toollibDATA \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
-info-am info dvi-am dvi check check-am installcheck-am installcheck \
-install-info-am install-info all-recursive-am install-exec-am \
-install-exec install-data-local install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# objects listed later in LIBM_OBJECTLISTS will override those listed earlier
-@USE_LIBTOOL_TRUE@libm-libtool-objectlist: $(LIBM_OBJECTLISTS)
-@USE_LIBTOOL_TRUE@	cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@
-
-# objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier
-@USE_LIBTOOL_TRUE@libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS)
-@USE_LIBTOOL_TRUE@	cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) |  $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@
-
-@USE_LIBTOOL_FALSE@libc.a: libc/libc.a libm.a
-@USE_LIBTOOL_FALSE@	rm -rf libc.a libg.a tmp
-@USE_LIBTOOL_FALSE@	mkdir tmp
-@USE_LIBTOOL_FALSE@	cd tmp; \
-@USE_LIBTOOL_FALSE@	 $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \
-@USE_LIBTOOL_FALSE@	 $(AR) x ../libc/libc.a ; \
-@USE_LIBTOOL_FALSE@	 $(AR) $(AR_FLAGS) ../$@ *.o
-@USE_LIBTOOL_FALSE@	$(RANLIB) libc.a
-@USE_LIBTOOL_FALSE@	ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-
-@USE_LIBTOOL_FALSE@libc/libc.a: ; @true
-
-@USE_LIBTOOL_FALSE@libm.a: libm/libm.a
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	ln libm/libm.a $@ >/dev/null 2>/dev/null || cp libm/libm.a $@
-
-@USE_LIBTOOL_FALSE@libm/libm.a: ; @true
-
-crt0.o: $(CRT0_DIR)$(CRT0)
-	rm -f $@
-	ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(CRT0_DIR)$(CRT0) $@
-
-$(CRT0_DIR)$(CRT0): ; @true
-
-crt1.o: $(CRT1_DIR)$(CRT1)
-	rm -f $@
-	ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(CRT0_DIR)$(CRT0) $@
-
-$(CRT1_DIR)$(CRT1): ; @true
-
-all-recursive: stmp-targ-include
-
-# The targ-include directory just holds the includes files for the
-# particular system and machine we have been configured for.  It is
-# used while building.
-stmp-targ-include: config.status
-	-rm -rf targ-include stmp-targ-include
-	mkdir targ-include targ-include/sys targ-include/machine
-	cp newlib.h targ-include/newlib.h
-	-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/sys/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	      cp $$i targ-include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done
-	touch $@
-
-install-data-local:	install-toollibLIBRARIES
-@USE_LIBTOOL_FALSE@	rm -f $(DESTDIR)$(toollibdir)/libg.a
-@USE_LIBTOOL_FALSE@	ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
-	-if [ -z "$(MULTISUBDIR)" ]; then \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
-	  for i in $(srcdir)/libc/include/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
-	  done; \
-	  $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \
-	  for i in $(srcdir)/libc/include/machine/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	  done; \
-	  for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done; \
-	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
-	  for i in $(srcdir)/libc/include/sys/*.h; do \
-	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
-	  done; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	  for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
-	    if [ -f $$i ]; then \
-	     $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
-	    else true; fi ; \
-	  done ; \
-	else true; fi
-
-# Force makedoc to be built before building info files.
-info-recursive: doc/makedoc
-dvi-recursive: doc/makedoc
-doc/makedoc:
-	cd doc && $(MAKE) all
-
-# Multilib support.
-.PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \
-	maintainer-clean-multi
-
-all-recursive: all-multi
-check-recursive: check-multi
-mostlyclean-recursive: mostlyclean-multi
-clean-recursive: clean-multi
-distclean-recursive: distclean-multi
-maintainer-clean-recursive: maintainer-clean-multi
-
-# The $(MAKE) comments below are to enable parallel building.
-all-multi:
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
-check-multi:
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE)
-mostlyclean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
-clean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
-distclean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
-maintainer-clean-multi:
-	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
-
-site.exp: Makefile
-	@echo 'Making a new site.exp file...'
-	@test ! -f site.bak || rm -f site.bak
-	@echo '## these variables are automatically generated by make ##' > $@-t
-	@echo '# Do not edit here.  If you wish to override these values' >> $@-t
-	@echo '# edit the last section' >> $@-t
-	@echo 'set tool $(DEJATOOL)' >> $@-t
-	@echo 'set tool_version $(VERSION)' >> $@-t
-	@echo 'set srcdir $(srcdir)/testsuite' >> $@-t
-	@echo 'set objdir' `pwd` >> $@-t
-	@echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t
-	@echo 'set host_alias $(build_alias)' >> $@-t
-	@echo 'set host_triplet $(build_triplet)' >> $@-t
-	@echo 'set target_alias $(host_alias)' >> $@-t
-	@echo 'set target_triplet $(host_triplet)' >> $@-t
-	@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
-	@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
-	@test ! -f site.exp || mv site.exp site.bak
-	@mv $@-t site.exp
-
-check-DEJAGNU: site.exp
-	@if [ -d testsuite ] ; then \
-	  true ; \
-	else \
-	  mkdir testsuite ; \
-	fi
-	@rm -f testsuite/site.exp
-	@cp site.exp testsuite/site.exp
-	@rootme=`pwd` ; \
-	export rootme ; \
-	srcdir=`cd ${srcdir}; pwd` ; \
-	export srcdir ; \
-	EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \
-	          echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \
-	        else \
-	          echo expect ; \
-	        fi` ; \
-	export EXPECT ; \
-	echo "Found expect: $${EXPECT}" ; \
-	if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \
-	  TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \
-	  export TCL_LIBRARY ; \
-	  echo "Found TCL library directory: $${TCL_LIBRARY}" ; \
-	fi ; \
-	RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
-	           echo $${srcdir}/../dejagnu/runtest ; \
-	         else \
-	           echo runtest ; \
-	         fi` ; \
-	export RUNTEST ; \
-	echo "Found runtest: $${RUNTEST}" ; \
-	cd testsuite ; \
-	if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \
-	   $$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \
-	   : ; \
-	else \
-	   echo "WARNING: could not find \`runtest'" 1>&2 ; \
-	fi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/Makefile.shared b/newlib/Makefile.shared
deleted file mode 100644
index 50e2f0cd5..000000000
--- a/newlib/Makefile.shared
+++ /dev/null
@@ -1,7 +0,0 @@
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
diff --git a/newlib/NEWS b/newlib/NEWS
deleted file mode 100644
index faba389e8..000000000
--- a/newlib/NEWS
+++ /dev/null
@@ -1,108 +0,0 @@
-*** Major changes in newlib version 1.11.0:
-
-* enhanced EL/IX support for i[3456]86-pc-linux 
-* new --enable-newlib-elix-level configuration option
-* positional arg I/O support for printf family (--enable-newlib-io-pos-args)
-* support for the Fujitsu FRV architecture added by Red Hat
-* support for Motorola Altivec and SPE added by Red Hat
-* new small reentrancy structure support
-* dynamic reentrancy structure support
-
-*** Major changes in newlib version 1.10.0:
-
-* libtool support for i[3456]86-pc-linux native builds
-* addition of libm/machine/i386 directory, for i386 fast math routines
-
-*** Major changes in newlib version 1.9.0:
-
-* i[3456]86-pc-linux support
-
-* Long Double I/O support via the WANT_IO_LONG_DBL flag
-
-* addition of reentrant environment functions
-
-* addition of xscale and AVR platforms
-
-* severe reduction in the number of warnings issued
-
-* consolidation of many RTEMS features into shared headers
-
-*** Major changes in newlib version 1.8.2:
-
-* RTEMS features and fixes from Joel Sherrill.
-
-* More work on reentrant routines.
-
-* Floating point math library check, --enable-newlib-hw-fp.
-
-*** Major changes in newlib version 1.8.1:
-
-* Added check for --enable-newlib-mb configure option which defines the
-  MB_CAPABLE macro.  Multibyte support for JIS, SJIS, and EUC-JP implemented.
-
-* Reduced code size for libm modules.
-
-* Replaced the BSD malloc with Doug Lea's malloc.
-
-*** Major changes in newlib version 1.8.0:
-
-* Added simulated signal handling functions _raise_r, _signal_r, raise, and
-  signal except for sparc-sun-sunos*, i[3456]86-*-sco*, and a29k-*-* systems,
-  which already provide access to signal.  The signal functionality provided
-  does not interact with hardware generated signals.
-    
-* Added reentrant function rand_r from POSIX.1c.
-
-* Removed _asctime, _next, _scanpoint, and _signgam fields from struct
-  _reent.  These are no longer necessary since there are now functions
-  that explictly support multiple threads (asctime_r, ctime_r, gamma_r,
-  gmtime_r, lgamma_r, localtime_r, rand_r, & strtok_r).
-
-
-*** Major changes in newlib version 1.7.0:
-
-* Cross compiler target libraries are now built in a subdir of the top level
-  build directory.
-
-  Old way: build
-                /newlib
-                       /m68020
-                              /m68881
-  New way:
-           build
-                /m68k-coff
-                          /m68020
-                                 /m68881
-
-  where m68020 and m68881 are multilib subdirectories
-
-* m68k targets support --disable options to avoid building unwanted versions
-  of the libraries.
-
-  --disable-softfloat - don't build libc, libg++, etc. for -msoft-float
-  --disable-m68881    - don't build libc, libg++, etc. for -m68881
-  --disable-m68000    - don't build libc, libg++, etc. for -m68000
-  --disable-m68020    - don't build libc, libg++, etc. for -m68020
-
-  These options have *no* effect on the default libraries, so if the default
-  is -m68020, --disable-m68020 is nilpotent.
-
-* Reentrancy support in libm removed.
-
-* strtok, strtol, strtoul, assert, div, ldiv, qsort, vfprintf
-  replaced with NetBSD versions.
-
-* Support for systems with 32 bit "doubles" added.
-
-* unctrl added.
-
-* dtoa.c updated from master dtoa.c soruces (netlib.att.com)
-
-* Various bug fixes.
-
-*** Major changes in newlib version 1.6.1:
-
-* Added reentrant functions (asctime_r, ctime_r, gmtime_r, localtime_r,
-and strtok_r) from POSIX.1c.
-
-* Removed _asctime_r and _strtok_r functions.
diff --git a/newlib/README b/newlib/README
deleted file mode 100644
index cbb8e6714..000000000
--- a/newlib/README
+++ /dev/null
@@ -1,319 +0,0 @@
-                        README for newlib-1.11.0 release
-           (mostly cribbed from the README in the gdb-4.13 release)
-
-This is `newlib', a simple ANSI C library, math library, and collection
-of board support packages.
-
-The newlib and libgloss subdirectories are a collection of software from
-several sources, each with their own copyright.  See the file COPYING.NEWLIB
-for details.  The rest of the release tree is under either the GNU GPL or
-LPGL copyright.
-
-THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
-Unpacking and Installation -- quick overview
-==========================
-
-When you unpack the newlib-1.11.0.tar.gz file, you'll find a directory
-called `newlib-1.11.0', which contains:
-
-COPYING          config/          install-sh*      mpw-configure
-COPYING.LIB      config-ml.in     libgloss/        mpw-install
-COPYING.NEWLIB   config.guess*    mkinstalldirs*   newlib/
-CYGNUS           config.sub*      move-if-change*  symlink-tree*
-ChangeLog        configure*       mpw-README       texinfo/
-Makefile.in      configure.in     mpw-build.in
-README           etc/             mpw-config.in
-
-To build NEWLIB, you must follow the instructions in the section entitled
-"Compiling NEWLIB".
-
-This will configure and build all the libraries and crt0 (if one exists).
-If `configure' can't determine your host system type, specify one as its
-argument, e.g., sun4 or sun4sol2.  NEWLIB is most often used in cross
-environments.
-
-NOTE THAT YOU MUST HAVE ALREADY BUILT AND INSTALLED GCC and BINUTILS.
-
-
-More Documentation
-==================
-
-   Newlib documentation is available on the net via:
-   http://sources.redhat.com/newlib/docs.html
-
-   All the documentation for NEWLIB comes as part of the machine-readable
-distribution.  The documentation is written in Texinfo format, which is
-a documentation system that uses a single source file to produce both
-on-line information and a printed manual.  You can use one of the Info
-formatting commands to create the on-line version of the documentation
-and TeX (or `texi2roff') to typeset the printed version.
-
-   If you want to format these Info files yourself, you need one of the
-Info formatting programs, such as `texinfo-format-buffer' or `makeinfo'.
-
-   If you want to typeset and print copies of this manual, you need TeX,
-a program to print its DVI output files, and `texinfo.tex', the Texinfo
-definitions file.
-
-   TeX is a typesetting program; it does not print files directly, but
-produces output files called DVI files.  To print a typeset document,
-you need a program to print DVI files.  If your system has TeX
-installed, chances are it has such a program.  The precise command to
-use depends on your system; `lpr -d' is common; another (for PostScript
-devices) is `dvips'.  The DVI print command may require a file name
-without any extension or a `.dvi' extension.
-
-   TeX also requires a macro definitions file called `texinfo.tex'. 
-This file tells TeX how to typeset a document written in Texinfo
-format.  On its own, TeX cannot read, much less typeset a Texinfo file.
-`texinfo.tex' is distributed with NEWLIB and is located in the
-`newlib-VERSION-NUMBER/texinfo' directory.
-
-
-
-Compiling NEWLIB
-================
-
-   To compile NEWLIB, you must build it in a directory separate from
-the source directory.  If you want to run NEWLIB versions for several host 
-or target machines, you need a different `newlib' compiled for each combination
-of host and target.  `configure' is designed to make this easy by allowing 
-you to generate each configuration in a separate subdirectory.
-If your `make' program handles the `VPATH' feature correctly (like GNU `make')
-running `make' in each of these directories builds the `newlib' libraries
-specified there.
-
-   To build `newlib' in a specific directory, run `configure' with the
-`--srcdir' option to specify where to find the source. (You also need
-to specify a path to find `configure' itself from your working
-directory.  If the path to `configure' would be the same as the
-argument to `--srcdir', you can leave out the `--srcdir' option; it
-will be assumed.)
-
-   For example, with version 1.11.0, you can build NEWLIB in a separate
-directory for a Sun 4 cross m68k-aout environment like this:
-
-     cd newlib-1.11.0
-     mkdir ../newlib-m68k-aout
-     cd ../newlib-m68k-aout
-     ../newlib-1.11.0/configure --host=sun4 --target=m68k-aout
-     make
-
-   When `configure' builds a configuration using a remote source
-directory, it creates a tree for the binaries with the same structure
-(and using the same names) as the tree under the source directory.  In
-the example, you'd find the Sun 4 library `libiberty.a' in the
-directory `newlib-m68k-aout/libiberty', and NEWLIB itself in
-`newlib-m68k-aout/newlib'.
-
-   When you run `make' to build a program or library, you must run it
-in a configured directory--whatever directory you were in when you
-called `configure' (or one of its subdirectories).
-
-   The `Makefile' that `configure' generates in each source directory
-also runs recursively.  If you type `make' in a source directory such
-as `newlib-1.11.0' (or in a separate configured directory configured with
-`--srcdir=PATH/newlib-1.11.0'), you will build all the required libraries.
-
-   When you have multiple hosts or targets configured in separate
-directories, you can run `make' on them in parallel (for example, if
-they are NFS-mounted on each of the hosts); they will not interfere
-with each other.
-
-
-Specifying names for hosts and targets
-======================================
-
-   The specifications used for hosts and targets in the `configure'
-script are based on a three-part naming scheme, but some short
-predefined aliases are also supported.  The full naming scheme encodes
-three pieces of information in the following pattern:
-
-     ARCHITECTURE-VENDOR-OS
-
-   For example, you can use the alias `sun4' as a HOST argument or in a
-`--target=TARGET' option.  The equivalent full name is
-`sparc-sun-sunos4'.
-
-   The `configure' script accompanying NEWLIB does not provide any query
-facility to list all supported host and target names or aliases. 
-`configure' calls the Bourne shell script `config.sub' to map
-abbreviations to full names; you can read the script, if you wish, or
-you can use it to test your guesses on abbreviations--for example:
-
-     % sh config.sub sun4
-     sparc-sun-sunos4.1.1
-     % sh config.sub sun3
-     m68k-sun-sunos4.1.1
-     % sh config.sub decstation
-     mips-dec-ultrix4.2
-     % sh config.sub hp300bsd
-     m68k-hp-bsd
-     % sh config.sub i386v
-     i386-pc-sysv
-     % sh config.sub i786v
-     Invalid configuration `i786v': machine `i786v' not recognized
-
-The Build, Host and Target Concepts in newlib
-=============================================
-
-The build, host and target concepts are defined for gcc as follows:
-
-build: the platform on which gcc is built.
-host: the platform on which gcc is run.
-target: the platform for which gcc generates code.
-
-Since newlib is a library, the target concept does not apply to it, and the
-build, host, and target options given to the top-level configure script must
-be changed for newlib's use.
-
-The options are shifted according to these correspondences:
-
-gcc's build platform has no equivalent in newlib.
-gcc's host platform is newlib's build platform.
-gcc's target platform is newlib's host platform.
-and as mentioned before, newlib has no concept of target.
-
-`configure' options
-===================
-
-   Here is a summary of the `configure' options and arguments that are
-most often useful for building NEWLIB.  `configure' also has several other
-options not listed here.
-
-     configure [--help]
-               [--prefix=DIR]
-               [--srcdir=PATH]
-               [--target=TARGET] HOST
-
-You may introduce options with a single `-' rather than `--' if you
-prefer; but you may abbreviate option names if you use `--'.
-
-`--help'
-     Display a quick summary of how to invoke `configure'.
-
-`--prefix=DIR'
-     Configure the source to install programs and files in directory
-     `DIR'.
-
-`--exec-prefix=DIR'
-     Configure the source to install host-dependent files in directory
-     `DIR'.
-
-`--srcdir=PATH'
-     *Warning: using this option requires GNU `make', or another `make'
-     that compatibly implements the `VPATH' feature.
-     Use this option to make configurations in directories separate
-     from the NEWLIB source directories.  Among other things, you can use
-     this to build (or maintain) several configurations simultaneously,
-     in separate directories.  `configure' writes configuration
-     specific files in the current directory, but arranges for them to
-     use the source in the directory PATH.  `configure' will create
-     directories under the working directory in parallel to the source
-     directories below PATH.
-
-`--norecursion'
-     Configure only the directory level where `configure' is executed;
-     do not propagate configuration to subdirectories.
-
-`--target=TARGET'
-     Configure NEWLIB for running on the specified TARGET.
-
-     There is no convenient way to generate a list of all available
-     targets.
-
-`HOST ...'
-     Configure NEWLIB to be built using a cross compiler running on
-     the specified HOST.
-
-     There is no convenient way to generate a list of all available
-     hosts.
-
-Running the Testsuite
-=====================
-
-To run newlib's testsuite, you'll need a site.exp in your home
-directory which points dejagnu to the proper baseboards directory and
-the proper exp file for your target.
-
-Before running make check-target-newlib, set the DEJAGNU environment
-variable to point to ~/site.exp.
-
-Here is a sample site.exp:
-
-# Make sure we look in the right place for the board description files.
-if ![info exists boards_dir] {
-    set boards_dir {}
-}
-lappend boards_dir "your dejagnu/baseboards here"
-
-verbose "Global Config File: target_triplet is $target_triplet" 2
-
-global target_list
-case "$target_triplet" in {
-
-    { "mips-*elf*" } {
-	set target_list "mips-sim"
-    }
-
-    default {
-	set target_list { "unix" }
-    }
-}
-
-mips-sim refers to an exp file in the baseboards directory.  You'll
-need to add the other targets you're testing to the case statement.
-
-Now type make check-target-newlib in the top-level build directory to
-run the testsuite.
-
-Shared newlib
-=============
-
-newlib uses libtool when it is being compiled natively (with
---target=i[34567]86-pc-linux-gnu) on an i[34567]86-pc-linux-gnu
-host. This allows newlib to be compiled as a shared library.
-
-To configure newlib, do the following from your build directory:
-
-$(source_dir)/src/configure --with-newlib --prefix=$(install_dir)
-
-configure will recognize that host == target ==
-i[34567]86-pc-linux-gnu, so it will tell newlib to compile itself using
-libtool. By default, libtool will build shared and static versions of
-newlib.
-
-To compile a program against shared newlib, do the following (where
-target_install_dir = $(install_dir)/i[34567]86-pc-linux-gnu):
-
-gcc -nostdlib $(target_install_dir)/lib/crt0.o progname.c -I $(target_install_dir)/include -L $(target_install_dir)/lib -lc -lm -lgcc
-
-To run the program, make sure that $(target_install_dir)/lib is listed
-in the LD_LIBRARY_PATH environment variable.
-
-To create a static binary linked against newlib, do the following:
-
-gcc -nostdlib -static $(target_install_dir)/lib/crt0.o progname.c -I $(target_install_dir)/include -L $(target_install_dir)/lib -lc -lm
-
-libtool can be instructed to produce only static libraries. To build
-newlib as a static library only, do the following from your build
-directory:
-
-$(source_dir)/src/configure --with-newlib --prefix=$(install_dir) --disable-shared
-
-Reporting Bugs
-==============
-
-The correct address for reporting bugs found in NEWLIB is
-"newlib@sources.redhat.com".  Please email all bug reports to that
-address.  Please include the NEWLIB version number (e.g., newlib-1.11.0),
-and how you configured it (e.g., "sun4 host and m68k-aout target").
-Since NEWLIB supports many different configurations, it is important
-that you be precise about this.
-
-Archives of the newlib mailing list are on-line, see
-	http://sources.redhat.com/ml/newlib/
diff --git a/newlib/acinclude.m4 b/newlib/acinclude.m4
deleted file mode 100644
index b71a45ea2..000000000
--- a/newlib/acinclude.m4
+++ /dev/null
@@ -1,196 +0,0 @@
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
diff --git a/newlib/aclocal.m4 b/newlib/aclocal.m4
deleted file mode 100644
index 9d7c20cf2..000000000
--- a/newlib/aclocal.m4
+++ /dev/null
@@ -1,1214 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/configure b/newlib/configure
deleted file mode 100755
index 9ec886c3f..000000000
--- a/newlib/configure
+++ /dev/null
@@ -1,3743 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-newlib-io-pos-args enable printf-family positional arg support"
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-ac_help="$ac_help
-  --enable-newlib-hw-fp    Turn on hardware floating point math"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=libc
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-
-
-
-ac_aux_dir=
-for ac_dir in .. $srcdir/..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Check whether --enable-newlib-io-pos-args or --disable-newlib-io-pos-args was given.
-if test "${enable_newlib_io_pos_args+set}" = set; then
-  enableval="$enable_newlib_io_pos_args"
-  case "${enableval}" in
-  yes) newlib_io_pos_args=yes ;;
-  no)  newlib_io_pos_args=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-pos-args option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_pos_args=no
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:609: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:662: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:719: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:752: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 757 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:785: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 790 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}."
-  fi
-else
-  newlib_basedir="${srcdir}/."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:965: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:986: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1004: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1047: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1060: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1073: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1086: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1099: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1124: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1154: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1203: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1227: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1258: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1290: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1322: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1354: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1399: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1453: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1487: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1672: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1702: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1753: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1785: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1796 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1827: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1832: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1841: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1860: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1903: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1933: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1936: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1971: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1988: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:2000: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2038: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2059: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2232: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2238: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2262: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2324: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2395: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2427: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2462: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2494: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2561 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2581: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2599: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2612 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2649: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2681: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2716: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2748: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2783: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2815: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2851: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2856 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2885: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2890 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-for ac_prog in gawk mawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3011: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-fi
-
-configdirs="libc libm"
-
-# Check whether --enable-newlib_hw_fp or --disable-newlib_hw_fp was given.
-if test "${enable_newlib_hw_fp+set}" = set; then
-  enableval="$enable_newlib_hw_fp"
-  case "${enableval}" in
-   yes) newlib_hw_fp=true ;;
-   no)  newlib_hw_fp=false ;;
-   *) { echo "configure: error: bad value ${enableval} for --enable-newlib-hw-fp" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_hw_fp=false
-fi
-
-
-
-if test x$newlib_hw_fp = xtrue; then
-  NEWLIB_HW_FP_TRUE=
-  NEWLIB_HW_FP_FALSE='#'
-else
-  NEWLIB_HW_FP_TRUE='#'
-  NEWLIB_HW_FP_FALSE=
-fi
-
-if test -z "${with_multisubdir}"; then
-  configdirs="${configdirs} doc"
-  have_doc=yes
-else
-  have_doc=
-fi
-
-
-if test x$have_doc = xyes; then
-  HAVE_DOC_TRUE=
-  HAVE_DOC_FALSE='#'
-else
-  HAVE_DOC_TRUE='#'
-  HAVE_DOC_FALSE=
-fi
-
-EXTRA_DIRS=
-case $host in
-  i[34567]86-pc-linux-*)
-	configdirs="${configdirs} iconvdata"
-	EXTRA_DIRS=iconvdata
-	;;
-esac
-
-
-# These get added in the top-level configure.in, except in the case where
-# newlib is being built natively.
-LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
-abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
-if test -z "${LIBC_INCLUDE_GREP}"; then
-  CC_FOR_NEWLIB="${CC} -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
-else
-  CC_FOR_NEWLIB="${CC}"
-fi
-
-
-subdirs="${configdirs}"
-
-
-CRT0=
-CRT0_DIR=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-  CRT0_DIR=libc/
-fi
-
-
-
-CRT1=${crt1}
-CRT1_DIR=
-if test -n "${crt1_dir}"; then
-  CRT1_DIR=${crt1_dir}/
-fi
-
-
-
-if test -n "${libm_machine_dir}"; then
-  LIBM_MACHINE_OBJECTLIST=libm/machine/${libm_machine_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${machine_dir}"; then
-  MACHINE_OBJECTLIST=libc/machine/${machine_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${sys_dir}"; then
-  SYS_OBJECTLIST=libc/sys/${sys_dir}/objectlist.awk.in
-fi
-
-
-if test "${have_sys_mach_dir}" = "yes"; then
-  SYS_MACH_OBJECTLIST=libc/sys/${sys_dir}/machine/${machine_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${posix_dir}"; then
-  POSIX_OBJECTLIST=libc/${posix_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${signal_dir}"; then
-  SIGNAL_OBJECTLIST=libc/${signal_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${syscall_dir}"; then
-  SYSCALL_OBJECTLIST=libc/${syscall_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${unix_dir}"; then
-  UNIX_OBJECTLIST=libc/${unix_dir}/objectlist.awk.in
-fi
-
-
-if test -n "${stdio64_dir}"; then
-  STDIO64_OBJECTLIST=libc/${stdio64_dir}/objectlist.awk.in
-fi
-
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
-  CC_FOR_BUILD=gcc
-fi
-
-
-if test "${newlib_elix_level}" -gt "0"; then
-cat >> confdefs.h <<EOF
-#define _ELIX_LEVEL ${newlib_elix_level}
-EOF
-
-fi
-
-if test "${newlib_mb}" = "yes"; then
-cat >> confdefs.h <<EOF
-#define _MB_LEN_MAX 8
-EOF
-
-fi
-
-cat >> confdefs.h <<EOF
-#define _NEWLIB_VERSION "$VERSION"
-EOF
-
-
-if test "${multilib}" = "yes"; then
-  multilib_arg="--enable-multilib"
-else
-  multilib_arg=
-fi
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile newlib.h:newlib.hin" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@AWK@%$AWK%g
-s%@NEWLIB_HW_FP_TRUE@%$NEWLIB_HW_FP_TRUE%g
-s%@NEWLIB_HW_FP_FALSE@%$NEWLIB_HW_FP_FALSE%g
-s%@HAVE_DOC_TRUE@%$HAVE_DOC_TRUE%g
-s%@HAVE_DOC_FALSE@%$HAVE_DOC_FALSE%g
-s%@EXTRA_DIRS@%$EXTRA_DIRS%g
-s%@CC_FOR_NEWLIB@%$CC_FOR_NEWLIB%g
-s%@subdirs@%$subdirs%g
-s%@CRT0@%$CRT0%g
-s%@CRT0_DIR@%$CRT0_DIR%g
-s%@CRT1@%$CRT1%g
-s%@CRT1_DIR@%$CRT1_DIR%g
-s%@LIBM_MACHINE_OBJECTLIST@%$LIBM_MACHINE_OBJECTLIST%g
-s%@MACHINE_OBJECTLIST@%$MACHINE_OBJECTLIST%g
-s%@SYS_OBJECTLIST@%$SYS_OBJECTLIST%g
-s%@SYS_MACH_OBJECTLIST@%$SYS_MACH_OBJECTLIST%g
-s%@POSIX_OBJECTLIST@%$POSIX_OBJECTLIST%g
-s%@SIGNAL_OBJECTLIST@%$SIGNAL_OBJECTLIST%g
-s%@SYSCALL_OBJECTLIST@%$SYSCALL_OBJECTLIST%g
-s%@UNIX_OBJECTLIST@%$UNIX_OBJECTLIST%g
-s%@STDIO64_OBJECTLIST@%$STDIO64_OBJECTLIST%g
-s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="newlib.h:newlib.hin"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-srcdir=${srcdir}
-host=${host}
-target=${target}
-with_multisubdir=${with_multisubdir}
-ac_configure_args="${multilib_arg} ${ac_configure_args}"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-newlib_basedir=${newlib_basedir}
-CC="${CC}"
-LDFLAGS="${LDFLAGS}"
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-if test -n "$CONFIG_FILES"; then
-  unset ac_file
-  . ${newlib_basedir}/../config-ml.in
-fi
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${configdirs}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/configure.host b/newlib/configure.host
deleted file mode 100644
index 3b0fbfb44..000000000
--- a/newlib/configure.host
+++ /dev/null
@@ -1,641 +0,0 @@
-# configure.host
-
-# This shell script handles all host based configuration for newlib.
-# It sets various shell variables based on the the host and the
-# configuration options.  You can modify this shell script without
-# needing to rerun autoconf.
-
-# This shell script should be invoked as
-#   . configure.host
-# If it encounters an error, it will exit with a message.
-
-# FIXME: This script is too complicated.  It does things in too many
-# different ways.  This was taken from the old Cygnus configure script
-# with only minor changes.  It should be cleaned up.
-
-# FIXME: The general approach of picking and choosing which
-# directories to configure, other than machine_dir and sys_dir, is
-# potentially confusing.
-
-# It uses the following shell variables:
-#   host		The configuration host
-#   host_cpu		The configuration host CPU
-#   newlib_mb		--enable-newlib-mb ("yes", "no")
-#   target_optspace	--enable-target-optspace ("yes", "no", "")
-#   newlib_multithread	--enable-newlib-multithread ("yes", "no", "yes")
-#   newlib_elix_level	--enable-newlib-elix-level ("1","2","3","4") ("4")
-
-# It sets the following shell variables:
-#   newlib_cflags	Special CFLAGS to use when building
-#   machine_dir		Subdirectory of libc/machine to configure
-#   sys_dir		Subdirectory of libc/sys to configure
-#   have_sys_mach_dir	Is there a machine subdirectory in sys subdirectory
-#   posix_dir		"posix" to build libc/posix, "" otherwise
-#   signal_dir		"signal" to build libc/signal, "" otherwise
-#   stdio64_dir		"stdio64" to build libc/stdio64, "" otherwise
-#   syscall_dir		"syscalls" to build libc/syscalls, "" otherwise
-#   unix_dir		"unix" to build libc/unix, "" otherwise
-#   use_libtool         flag: use libtool to build newlib?
-#   aext                library extension - needed for libtool support
-#   oext                object file extension - needed for libtool support
-#   crt1                name of crt1 object if one is provided
-#   crt1_dir            directory where crt1 object is found
-
-newlib_cflags=
-libm_machine_dir=
-machine_dir=
-sys_dir=
-posix_dir=
-signal_dir=signal
-stdio64_dir=
-syscall_dir=
-unix_dir=
-mach_add_setjmp=
-crt1=
-crt1_dir=
-use_libtool=no
-have_sys_mach_dir=no
-aext=a
-oext=o
-
-case "${target_optspace}:${host}" in
-  yes:*)
-    newlib_cflags="${newlib_cflags} -Os"
-    ;;
-  :m32r-* | :d10v-* | :d30v-* | :avr-*)
-    newlib_cflags="${newlib_cflags} -Os"
-    ;;
-  no:* | :*)
-    newlib_cflags="${newlib_cflags} -O2"
-    ;;
-esac
-
-# Get the source directories to use for the CPU type.
-# machine_dir should supply CPU dependent routines, such as setjmp.
-# newlib_cflags is passed to gcc when compiling.
-# THIS TABLE IS ALPHA SORTED.  KEEP IT THAT WAY.
-
-case "${host_cpu}" in
-  a29k)
-	machine_dir=a29k
-	;;
-  arc)
-	machine_dir=
-	;;
-  arm)
-	machine_dir=arm
-	;;
-  avr*)
-	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues"
-	;;
-  d10v*)
-	machine_dir=d10v
-	;;
-  d30v*)
-	machine_dir=d30v
-	;;
-  ep9312)
-	machine_dir=arm
-	;;
-  fr30)
-	machine_dir=fr30
-	;;
-  frv)
-	machine_dir=frv
-        ;;
-  h8300)
-	machine_dir=h8300
-	;;
-  h8500)
-	machine_dir=h8500
-	;;
-  hppa*)
-	machine_dir=hppa
-	;;
-  i960)
-	machine_dir=i960
-	;;
-  i[34567]86)
-	# Don't use for these since they provide their own setjmp.
-	case ${host} in
-	*-*-sco* | *-*-cygwin*) 
-		libm_machine_dir=i386
-		machine_dir=i386
-		;;
-	*) 
-		libm_machine_dir=i386
-		machine_dir=i386
-		mach_add_setjmp=true
-		;;
-	esac
-	;;
-  ia64*)
-	;;
-  iq2000)
-	machine_dir=iq2000
-	;;
-  m32r*)
-	machine_dir=m32r
-	;;
-
-  m68hc11|m6811|m68hc12|m6812)
-	machine_dir=m68hc11
-	newlib_cflags="-DPREFER_SIZE_OVER_SPEED -Os -mrelax"
-	CFLAGS="-g -Os"
-	;;
-  
-  m68*)
-	machine_dir=m68k
-	newlib_cflags="${newlib_cflags} -DCOMPACT_CTYPE"
-	;;
-  m88k)
-	machine_dir=m88k
-	newlib_cflags="${newlib_cflags} -m88000"
-	;;
-  m88110)
-	machine_dir=m88k
-	newlib_cflags="${newlib_cflags} -m88110"
-	;;
-  mcore)
-	;;
-  mips*)
-	machine_dir=mips
-	;;
-  mmix)
-	;;
-  mn10200)
-	machine_dir=mn10200
-	;;
-  mn10300)
-	machine_dir=mn10300
-	;;
-  or16)
-	;;
-  or32)
-	;;
-  powerpc*)
-	machine_dir=powerpc
-	;;
-  sh | sh64)
-	machine_dir=sh
-	;;
-  sparc*)
-	machine_dir=sparc
-	# FIXME: Might wish to make MALLOC_ALIGNMENT more generic.
-	newlib_cflags="${newlib_cflags} -DMALLOC_ALIGNMENT=8"
-	;;
-  strongarm)
-	machine_dir=arm
-	;;
-  xscale)
-	machine_dir=xscale
-	;;
-  thumb)
-	machine_dir=arm
-	;;
-  tic80*)
-	machine_dir=tic80
-	;;
-  v70)
-	;;
-  v810)
-	;;
-  v850)
-	machine_dir=v850
-	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mv850 "
-	;;
-  v850e)
-	machine_dir=v850
-	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED "
-	;;
-  w65*)
-	machine_dir=w65
-	;;
-  xstormy16)
-	machine_dir=xstormy16
-	newlib_cflags="${newlib_cflags} -DMALLOC_PROVIDED"
-        ;;
-  z8k)
-	machine_dir=z8k
-	;;
-  *)
-	echo '***' "Newlib does not support CPU ${host_cpu}" 1>&2
-	exit 1
-	;;
-esac
-
-# Disable thread support if requested.
-
-if [ "${newlib_multithread}" = "no" ] ; then
-	newlib_cflags="${newlib_cflags} -D__SINGLE_THREAD__"
-fi
-
-# Disable syscall support if requested.
-
-if [ "${newlib_may_supply_syscalls}" = "no" ] ; then
-        newlib_cflags="${newlib_cflags} -D__NO_SYSCALLS__"
-fi
-
-# Enable multibyte support if requested or it is defaulted
-# for target.
-
-if [ "x${newlib_mb}" = "x" ]; then
-	case "${host}" in
-  	  i[34567]86-pc-linux-*|*-*-cygwin*)
-		newlib_mb=yes
-	  	;;
-	esac
-fi
-
-if [ "x${newlib_mb}" = "xyes" ] ; then
-	newlib_cflags="${newlib_cflags} -DMB_CAPABLE"
-fi
-
-# Disable printf/scanf floating-point support if requested.
-
-if [ "${newlib_io_float}" = "no" ] ; then
-	newlib_cflags="${newlib_cflags} -DNO_FLOATING_POINT"
-fi
-
-# Enable printf positional argument support if requested.
-
-if [ "${newlib_io_pos_args}" = "yes" ] ; then
-	newlib_cflags="${newlib_cflags} -DWANT_IO_POS_ARGS"
-fi
-
-# Verify if shared newlib support is allowed and set appropriate variables
-# We don't want to use libtool for platforms that we are not going to
-# support shared libraries.  This is because it adds executable tests which
-# we don't want for most embedded platforms.
-case "${host}" in
-  i[34567]86-pc-linux-*)
-    use_libtool=yes
-    have_sys_mach_dir=yes
-    stdio64_dir=stdio64
-    oext=lo
-    aext=la ;;
-  *) ;; #shared library not supported for ${host}
-esac
-
-# Get the source directories to use for the host.  unix_dir is set
-# to unix to get some standard Unix routines.  posix_dir is set to get some
-# standard Posix routines.  sys_dir should supply system dependent routines
-# including crt0.
-# THIS TABLE IS ALPHA SORTED.  KEEP IT THAT WAY.
-
-case "${host}" in
-  *-*-cygwin*)
-	posix_dir=posix
-	stdio64_dir=stdio64
-	;;
-  *-*-netware*)
-	signal_dir=
-	sys_dir=netware
-	;;
-  *-*-rtems*)			# generic RTEMS support
-	sys_dir=rtems
-        # RTEMS POSIX support is all inside RTEMS
-	;;
-  a29k-*-*)
-	sys_dir=a29khif
-	signal_dir=
-	;;
-  arc-*-*)
-	sys_dir=arc
-	;;
-  arm-*-*)
-	sys_dir=arm 
-	;;
-  d10v*)
-	sys_dir=d10v
-	;;
-  d30v*)
-	sys_dir=
-	;;
-  ep9312-*-*)
-	sys_dir=arm
-	;;
-  h8300-*-hms*)
-	sys_dir=h8300hms
-	;;
-  h8300-*-elf*)
-	sys_dir=h8300hms
-	;;
-  h8300-*-coff*)
-	sys_dir=h8300hms
-	;;
-  h8300-*-xray*)
-	sys_dir=h8300xray
-	;;
-  h8500-*-hms*)
-	sys_dir=h8500hms
-	;;
-  h8500-*-elf*)
-	sys_dir=h8500hms
-	;;
-  i[34567]86-*-sco*)
-	sys_dir=sysvi386
-	unix_dir=unix
-	;;
-  i[34567]86-pc-linux-*)
-	sys_dir=linux
-	unix_dir=unix
-	posix_dir=posix
-	crt1=crt1.o
-	crt1_dir=libc/sys/${sys_dir}	
-	gcc_dir=`gcc -print-search-dirs | awk '/^install:/{print $2}'`
-	#newlib_cflags="${newlib_cflags} -Werror" # DEBUGGING ONLY;BREAKS BUILD
-	newlib_cflags="${newlib_cflags} -Wall"
-	newlib_cflags="${newlib_cflags} -D_I386MACH_ALLOW_HW_INTERRUPTS"
-	newlib_cflags="${newlib_cflags} -DHAVE_FCNTL"
-	newlib_cflags="${newlib_cflags} -DWANT_IO_POS_ARGS -DWANT_IO_LONG_DBL"
-	# --- Required when building a shared library ------------------------
-	newlib_cflags="${newlib_cflags} -fPIC -D_I386MACH_NEED_SOTYPE_FUNCTION"
-	# --- The three lines below are optional ------------------------------
-	##newlib_cflags="${newlib_cflags} -nostdinc"
-	##newlib_cflags="${newlib_cflags} -I`newlib-flags --kernel-dir`/include"
-	##newlib_cflags="${newlib_cflags} -idirafter ${gcc_dir}include"
-	;;
-
-  m68hc11-*-*|m6811-*-*|m6812-*-*|m68hc12-*-*)
-	;;
-
-  m68k-sun-sunos*)
-	unix_dir=unix
-	;;
-  m8*-bug-*)
-	sys_dir=m88kbug
-	;;
-  mips*-dec-*)
-	sys_dir=decstation
-	;;
-  mmix-knuth-mmixware)
-	sys_dir=mmixware
-	;;
-  powerpcle-*-pe)
-	posix_dir=posix
-	;;
-  sh*-*)
-	sys_dir=sh
-	;;
-  sparc-sun-sunos*)
-	sys_dir=sun4
-	unix_dir=unix
-	;;
-  sparc64*)
-	sys_dir=sparc64
-	unix_dir=unix
-	;;
-  strongarm-*-*)
-	sys_dir=arm 
-	;;
-  xscale-*-*)
-	sys_dir=arm 
-	;;
-  thumb-*-*)
-	sys_dir=arm 
-	;;
-  tic80*)
-	sys_dir=tic80
-	;;
-  v70-nec-*)
-	sys_dir=sysvnecv70
-	;;
-  v810-*-*)
-	sys_dir=sysnec810
-	;;
-  v850-*-*)
-	sys_dir=sysnecv850
-	;;
-  v850e-*-*)
-	sys_dir=sysnecv850
-	;;
-  v850ea-*-*)
-	sys_dir=sysnecv850
-	;;
-  frv*)
-        sys_dir=
-        ;;
-  w65-*-*)
-	sys_dir=w65
-	;;
-  z8k-*-coff)
-	sys_dir=z8ksim
-	;;
-esac
-
-# Host specific flag settings -- usually for features that are not
-# general enough or broad enough to be handled above.
-# THIS TABLE IS ALPHA SORTED.  KEEP IT THAT WAY.
-
-case "${host}" in
-  *-*-cygwin*)
-	test -z "$cygwin_srcdir" && cygwin_srcdir=`cd ${srcdir}/../winsup/cygwin; pwd`
-	export cygwin_srcdir
-	newlib_cflags="${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME -DSIGNAL_PROVIDED -DWANT_IO_POS_ARGS -DWANT_IO_LONG_DBL -DWANT_PRINTF_LONG_LONG -D_COMPILING_NEWLIB -DHAVE_FCNTL -DMALLOC_PROVIDED -I${cygwin_srcdir}/include"
-	syscall_dir=syscalls
-	;;
-# RTEMS supplies its own versions of some routines:
-#       malloc()            (reentrant version)
-#       exit()              RTEMS has a "global" reent to flush
-#       signal()/raise()    RTEMS has its own including pthread signals
-#       _XYZ_r()            RTEMS has its own reentrant routines
-#
-#  NOTE: When newlib malloc uses a semaphore, RTEMS will switch to that.
-  *-*-rtems*)
-	newlib_cflags="${newlib_cflags} -DHAVE_GETTIMEOFDAY -DMALLOC_PROVIDED -DEXIT_PROVIDED -DMISSING_SYSCALL_NAMES -DSIGNAL_PROVIDED -DREENTRANT_SYSCALLS_PROVIDED -DHAVE_OPENDIR -DNO_EXEC -DWANT_PRINTF_LONG_LONG -DHAVE_FCNTL"
-	;;
-# VxWorks supplies its own version of malloc, and the newlib one
-# doesn't work because VxWorks does not have sbrk.
-  *-wrs-vxworks*)
-	newlib_cflags="${newlib_cflags} -DMALLOC_PROVIDED -DMISSING_SYSCALL_NAMES -DHAVE_FCNTL"
-	;;
-# UDI doesn't have exec, so system() should fail the right way
-  a29k-amd-udi)
-	newlib_cflags="${newlib_cflags} -DNO_EXEC"
-	syscall_dir=syscalls
-	;;
-  arc-*-*)
-	syscall_dir=syscalls
-	;;
-  arm-*-pe)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-# Don't use the debugging protocols just yet.
-	;;
-  arm-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-# Select which debug protocol is being used.
-# ARM_RDP_MONITOR selects the Demon monitor.
-# ARM_RDI_MONITOR selects the Angel monitor.
-# If neither are defined, then hard coded defaults will be used
-# to create the program's environment.
-# See also thumb below.
-#	newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
-	newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	;;
-  avr*)
-	newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
-	;;
-  d10v*)
-	newlib_cflags="${newlib_cflags} -DSMALL_MEMORY"
-	syscall_dir=syscalls
-	;;
-  d30v*)
-	newlib_cflags="${newlib_cflags} -DABORT_MESSAGE -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
-	syscall_dir=
-	;;
-  ep9312-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-	newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	;;
-  fr30-*-*)
-	newlib_cflags="${newlib_cflags}"
-	syscall_dir=syscalls
-	;;
-  frv-*-*)
-        syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DWANT_PRINTF_LONG_LONG"
-        ;;
-  h8300*-*-*)
-	syscall_dir=syscalls	
-	newlib_cflags="${newlib_cflags} -DSMALL_DTOA -DSMALL_MEMORY"
-	# Simulator only extensions for H8300.
-	# Uncomment the next line to enable them.
-	# newlib_cflags="${newlib_cflags} -D__SIMULATOR__"
-	;;	
-  h8500-*-*)
-	syscall_dir=syscalls	
-	newlib_cflags="${newlib_cflags} -DSMALL_DTOA -DSMALL_MEMORY"
-	;;	
-  i[34567]86-*-sco*)
-	newlib_cflags="${newlib_cflags} -DSIGNAL_PROVIDED -DHAVE_FCNTL"
-	;;
-  i[34567]86-*-netware*)
-	newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES -DNO_EXEC -DABORT_PROVIDED -DCLOCK_PROVIDED -DMALLOC_PROVIDED -DHAVE_FCNTL"
-	;;
-  iq2000*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DWANT_PRINTF_LONG_LONG"
-	;;
-  m32r-*-*)
-	# Pass -msdata=sdata so _impure_ptr goes in .sdata.
-	# We don't generate sda relocs however for upward compatibility.
-	# FIXME: This is necessary because the default multilib doesn't
-	# use --print-multi-lib.
-	newlib_cflags="${newlib_cflags} -msdata=sdata"
-	syscall_dir=syscalls
-	;;
-  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-	newlib_cflags="${newlib_cflags} -DNO_EXEC -DABORT_PROVIDED -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
-	;;
-  mcore-*-*)
-	newlib_cflags="${newlib_cflags}"
-	syscall_dir=syscalls
-	;;
-  mips64vr*-*-*)
-	newlib_cflags="${newlib_cflags} -DWANT_PRINTF_LONG_LONG -DMISSING_SYSCALL_NAMES"
-	;;
-  mmix-*)
-	syscall_dir=syscalls
-	# We need every symbol 32-bit aligned, so the invalid
-	# construct with attribute ((alias ("_ctype_b+127"))) breaks.
-	newlib_cflags="${newlib_cflags} -DCOMPACT_CTYPE"
-	;;
-  mn10?00-*-*)
-	syscall_dir=syscalls
-	;;
-  powerpc*-*-eabialtivec*)
-	newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES -DWANT_PRINTF_LONG_LONG"
-	;;
-  powerpc*-*-eabispe*)
-	newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES -DWANT_PRINTF_LONG_LONG"
-	;;
-  powerpc*-*-eabi* | \
-  powerpc*-*-elf* | \
-  powerpc*-*-linux* | \
-  powerpc*-*-rtem* | \
-  powerpc*-*-sysv* | \
-  powerpc*-*-solaris*)
-	newlib_cflags="${newlib_cflags} -mrelocatable-lib -mno-eabi -mstrict-align -DMISSING_SYSCALL_NAMES -DWANT_PRINTF_LONG_LONG"
-	;;
-  powerpcle-*-pe)
-	newlib_cflags="${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME -DHAVE_FCNTL"
-	syscall_dir=syscalls
-	;;
-  sh*-*-*)
-	newlib_cflags="${newlib_cflags} -DHAVE_GETTIMEOFDAY -DWANT_PRINTF_LONG_LONG"
-	syscall_dir=syscalls
-	;;
-  sparc-sun-sunos*)
-	newlib_cflags="${newlib_cflags} -DSIGNAL_PROVIDED"
-	;;
-  sparc64-*-*)
-	newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED -DHAVE_BLKSIZE -DHAVE_GETTIMEOFDAY -DHAVE_FCNTL"
-	# This either belongs elsewhere or nowhere. But I need *something*,
-	# so for now it's here ...
-	case "${host_os}" in
-	  aoutv8 | *32p)
-		newlib_cflags="${newlib_cflags} -DTARGET_PTR_SIZE=32" ;;
-	  *)
-		newlib_cflags="${newlib_cflags} -DTARGET_PTR_SIZE=64" ;;
-	esac
-	;;
-  strongarm-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-	newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	;;
-  xscale-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-	newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM -DHAVE_RENAME"
-	;;
-  thumb-*-pe)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-# Don't use the debugging protocols just yet.
-	;;
-  thumb-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DABORT_PROVIDED -DHAVE_GETTIMEOFDAY"
-# Select which debug protocol is being used.
-# ARM_RDP_MONITOR selects the Demon monitor.
-# ARM_RDI_MONITOR selects the Angel monitor.
-# If neither are defined, then hard coded defaults will be used
-# to create the program's environment.
-# See also arm and strongarm above.
-#	newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
-	newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	;;
-  tic80*)
-	syscall_dir=syscalls
-	;;
-  v850-*-*)
-	syscall_dir=syscalls
-	;;
-  v850e-*-*)
-	syscall_dir=syscalls
-	;;
-  v850ea-*-*)
-	syscall_dir=syscalls
-	;;
-  w65-*-*)
-	syscall_dir=syscalls	
-	newlib_cflags="${newlib_cflags} -DSMALL_DTOA -DSMALL_MEMORY"
-	;;	
-  xstormy16-*-*)
-	newlib_cflags="${newlib_cflags} -DHAVE_GETTIMEOFDAY"
-	syscall_dir=syscalls
-	;;
-  z8k-*-*)
-	syscall_dir=syscalls
-	;;
-  *)
-	newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES"
-	syscall_dir=
-	;;
-esac
diff --git a/newlib/configure.in b/newlib/configure.in
deleted file mode 100644
index 9283590f3..000000000
--- a/newlib/configure.in
+++ /dev/null
@@ -1,174 +0,0 @@
-dnl This is the newlib configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(libc)
-AM_CONFIG_HEADER(newlib.h:newlib.hin)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(..)
-
-dnl Support --enable-newlib-io-pos-args
-dnl This option is actually read in libc/configure.in.  It is repeated
-dnl here so that it shows up in the help text.
-AC_ARG_ENABLE(newlib-io-pos-args,
-[  --enable-newlib-io-pos-args enable printf-family positional arg support],
-[case "${enableval}" in
-  yes) newlib_io_pos_args=yes ;;
-  no)  newlib_io_pos_args=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-pos-args option) ;;
- esac], [newlib_io_pos_args=no])dnl
-
-
-NEWLIB_CONFIGURE(.)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-AC_PROG_AWK
-fi
-
-configdirs="libc libm"
-
-AC_ARG_ENABLE(newlib_hw_fp,
-[  --enable-newlib-hw-fp    Turn on hardware floating point math],
-[case "${enableval}" in
-   yes) newlib_hw_fp=true ;;
-   no)  newlib_hw_fp=false ;;
-   *) AC_MSG_ERROR(bad value ${enableval} for --enable-newlib-hw-fp) ;;
- esac],[newlib_hw_fp=false])
-AM_CONDITIONAL(NEWLIB_HW_FP, test x$newlib_hw_fp = xtrue)
-
-if test -z "${with_multisubdir}"; then
-  configdirs="${configdirs} doc"
-  have_doc=yes
-else
-  have_doc=
-fi
-AM_CONDITIONAL(HAVE_DOC, test x$have_doc = xyes)
-
-EXTRA_DIRS=
-case $host in
-  i[[34567]]86-pc-linux-*)
-	configdirs="${configdirs} iconvdata"
-	EXTRA_DIRS=iconvdata
-	;;
-esac
-AC_SUBST(EXTRA_DIRS)
-
-# These get added in the top-level configure.in, except in the case where
-# newlib is being built natively.
-LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
-abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
-if test -z "${LIBC_INCLUDE_GREP}"; then
-  CC_FOR_NEWLIB="${CC} -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
-else
-  CC_FOR_NEWLIB="${CC}"
-fi
-AC_SUBST(CC_FOR_NEWLIB)
-
-AC_CONFIG_SUBDIRS(${configdirs})
-
-CRT0=
-CRT0_DIR=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-  CRT0_DIR=libc/
-fi
-AC_SUBST(CRT0)
-AC_SUBST(CRT0_DIR)
-
-CRT1=${crt1}
-CRT1_DIR=
-if test -n "${crt1_dir}"; then
-  CRT1_DIR=${crt1_dir}/
-fi
-AC_SUBST(CRT1)
-AC_SUBST(CRT1_DIR)
-
-if test -n "${libm_machine_dir}"; then
-  LIBM_MACHINE_OBJECTLIST=libm/machine/${libm_machine_dir}/objectlist.awk.in
-fi
-AC_SUBST(LIBM_MACHINE_OBJECTLIST)
-
-if test -n "${machine_dir}"; then
-  MACHINE_OBJECTLIST=libc/machine/${machine_dir}/objectlist.awk.in
-fi
-AC_SUBST(MACHINE_OBJECTLIST)
-
-if test -n "${sys_dir}"; then
-  SYS_OBJECTLIST=libc/sys/${sys_dir}/objectlist.awk.in
-fi
-AC_SUBST(SYS_OBJECTLIST)
-
-if test "${have_sys_mach_dir}" = "yes"; then
-  SYS_MACH_OBJECTLIST=libc/sys/${sys_dir}/machine/${machine_dir}/objectlist.awk.in
-fi
-AC_SUBST(SYS_MACH_OBJECTLIST)
-
-if test -n "${posix_dir}"; then
-  POSIX_OBJECTLIST=libc/${posix_dir}/objectlist.awk.in
-fi
-AC_SUBST(POSIX_OBJECTLIST)
-
-if test -n "${signal_dir}"; then
-  SIGNAL_OBJECTLIST=libc/${signal_dir}/objectlist.awk.in
-fi
-AC_SUBST(SIGNAL_OBJECTLIST)
-
-if test -n "${syscall_dir}"; then
-  SYSCALL_OBJECTLIST=libc/${syscall_dir}/objectlist.awk.in
-fi
-AC_SUBST(SYSCALL_OBJECTLIST)
-
-if test -n "${unix_dir}"; then
-  UNIX_OBJECTLIST=libc/${unix_dir}/objectlist.awk.in
-fi
-AC_SUBST(UNIX_OBJECTLIST)
-
-if test -n "${stdio64_dir}"; then
-  STDIO64_OBJECTLIST=libc/${stdio64_dir}/objectlist.awk.in
-fi
-AC_SUBST(STDIO64_OBJECTLIST)
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
-  CC_FOR_BUILD=gcc
-fi
-AC_SUBST(CC_FOR_BUILD)
-
-if test "${newlib_elix_level}" -gt "0"; then
-AC_DEFINE_UNQUOTED(_ELIX_LEVEL,${newlib_elix_level})
-fi
-
-if test "${newlib_mb}" = "yes"; then
-AC_DEFINE_UNQUOTED(_MB_LEN_MAX,8)
-fi
-
-AC_DEFINE_UNQUOTED(_NEWLIB_VERSION,"$VERSION")
-
-if test "${multilib}" = "yes"; then
-  multilib_arg="--enable-multilib"
-else
-  multilib_arg=
-fi
-
-
-AC_OUTPUT(Makefile,
-[if test -n "$CONFIG_FILES"; then
-  unset ac_file
-  . ${newlib_basedir}/../config-ml.in
-fi],
-srcdir=${srcdir}
-host=${host}
-target=${target}
-with_multisubdir=${with_multisubdir}
-ac_configure_args="${multilib_arg} ${ac_configure_args}"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-newlib_basedir=${newlib_basedir}
-CC="${CC}"
-LDFLAGS="${LDFLAGS}"
-)
diff --git a/newlib/doc/Makefile.am b/newlib/doc/Makefile.am
deleted file mode 100644
index de802d61e..000000000
--- a/newlib/doc/Makefile.am
+++ /dev/null
@@ -1,21 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-# We can't use noinst_PROGRAMS, because automake will add $(EXEEXT).
-noinst_DATA = makedoc
-
-MKDOC = makedoc$(EXEEXT_FOR_BUILD)
-
-# We don't use CFLAGS with CC_FOR_BUILD because here CFLAGS will
-# actually be CFLAGS_FOR_TARGET, and in some cases that will include
-# -Os, which CC_FOR_BUILD may not recognize.
-
-$(MKDOC): makedoc.o
-	$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS) -o $(MKDOC) makedoc.o
-
-makedoc.o: makedoc.c
-	$(CC_FOR_BUILD) -g $(CFLAGS_FOR_BUILD) -c $(srcdir)/makedoc.c
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/doc/Makefile.in b/newlib/doc/Makefile.in
deleted file mode 100644
index 5e43e4296..000000000
--- a/newlib/doc/Makefile.in
+++ /dev/null
@@ -1,255 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CC_FOR_BUILD = @CC_FOR_BUILD@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-# We can't use noinst_PROGRAMS, because automake will add $(EXEEXT).
-noinst_DATA = makedoc
-
-MKDOC = makedoc$(EXEEXT_FOR_BUILD)
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../acinclude.m4 \
-		../aclocal.m4 ../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-tags: TAGS
-TAGS:
-
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: tags distdir info-am info dvi-am dvi check check-am \
-installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# We don't use CFLAGS with CC_FOR_BUILD because here CFLAGS will
-# actually be CFLAGS_FOR_TARGET, and in some cases that will include
-# -Os, which CC_FOR_BUILD may not recognize.
-
-$(MKDOC): makedoc.o
-	$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS) -o $(MKDOC) makedoc.o
-
-makedoc.o: makedoc.c
-	$(CC_FOR_BUILD) -g $(CFLAGS_FOR_BUILD) -c $(srcdir)/makedoc.c
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/doc/aclocal.m4 b/newlib/doc/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/doc/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/doc/ansidecl.h b/newlib/doc/ansidecl.h
deleted file mode 100644
index 1c7708fd5..000000000
--- a/newlib/doc/ansidecl.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* ANSI and traditional C compatability macros
-   Copyright 1991 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   Some ANSI environments are "broken" in the sense that __STDC__ cannot be
-   relied upon to have it's intended meaning.  Therefore we must use our own
-   concoction: _HAVE_STDC.  Always use _HAVE_STDC instead of __STDC__ in newlib
-   sources!
-
-   ANSI C is assumed if _HAVE_STDC is #defined.
-
-   Macro	ANSI C definition	Traditional C definition
-   -----	---- - ----------	----------- - ----------
-   PTR		`void *'		`char *'
-   LONG_DOUBLE	`long double'		`double'
-   CONST	`const'			`'
-   VOLATILE	`volatile'		`'
-   SIGNED	`signed'		`'
-   PTRCONST	`void *const'		`char *'
-
-   DEFUN(name, arglist, args)
-
-	Defines function NAME.
-
-	ARGLIST lists the arguments, separated by commas and enclosed in
-	parentheses.  ARGLIST becomes the argument list in traditional C.
-
-	ARGS list the arguments with their types.  It becomes a prototype in
-	ANSI C, and the type declarations in traditional C.  Arguments should
-	be separated with `AND'.  For functions with a variable number of
-	arguments, the last thing listed should be `DOTS'.
-
-   DEFUN_VOID(name)
-
-	Defines a function NAME, which takes no arguments.
-
-   EXFUN(name, prototype)
-
-	Is used in an external function declaration.
-	In ANSI C it is `NAMEPROTOTYPE' (so PROTOTYPE should be enclosed in
-	parentheses).  In traditional C it is `NAME()'.
-	For a function that takes no arguments, PROTOTYPE should be `(NOARGS)'.
-
-    For example:
-	extern int EXFUN(printf, (CONST char *format DOTS));
-	int DEFUN(fprintf, (stream, format),
-		  FILE *stream AND CONST char *format DOTS) { ... }
-	void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef	_ANSIDECL_H
-
-#define	_ANSIDECL_H	1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#ifdef	_HAVE_STDC
-
-#define	PTR		void *
-#define	PTRCONST	void *CONST
-#define	LONG_DOUBLE	long double
-
-#define	AND		,
-#define	NOARGS		void
-#define	CONST		const
-#define	VOLATILE	volatile
-#define	SIGNED		signed
-#define	DOTS		, ...
-
-#define	EXFUN(name, proto)		name proto
-#define	DEFUN(name, arglist, args)	name(args)
-#define	DEFUN_VOID(name)		name(NOARGS)
-
-#else	/* Not ANSI C.  */
-
-#define	PTR		char *
-#define	PTRCONST	PTR
-#define	LONG_DOUBLE	double
-
-#define	AND		;
-#define	NOARGS
-#define	CONST
-#define	VOLATILE
-#define	SIGNED
-#define	DOTS
-
-#define const
-
-#define	EXFUN(name, proto)		name()
-#define	DEFUN(name, arglist, args)	name arglist args;
-#define	DEFUN_VOID(name)		name()
-
-#endif	/* ANSI C.  */
-
-
-#endif	/* ansidecl.h	*/
diff --git a/newlib/doc/configure b/newlib/doc/configure
deleted file mode 100755
index 14e4c9b9c..000000000
--- a/newlib/doc/configure
+++ /dev/null
@@ -1,1926 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=makedoc.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}.."
-  fi
-else
-  newlib_basedir="${srcdir}/.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
-  if test "x$cross_compiling" = "xno"; then
-    CC_FOR_BUILD='$(CC)'
-  else
-    CC_FOR_BUILD=gcc
-  fi
-fi
-
-
-# Also set EXEEXT_FOR_BUILD.
-if test "x$cross_compiling" = "xno"; then
-  EXEEXT_FOR_BUILD='$(EXEEXT)'
-else
-  echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:1592: checking for build system executable suffix" >&5
-if eval "test \"`echo '$''{'newlib_cv_build_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > ac_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-    ${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5
-    newlib_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//`
-    rm -f ac_c_test*
-    test x"${newlib_cv_build_exeext}" = x && newlib_cv_build_exeext=no
-fi
-
-echo "$ac_t""$newlib_cv_build_exeext" 1>&6
-  EXEEXT_FOR_BUILD=""
-  test x"${newlib_cv_build_exeext}" != xno && EXEEXT_FOR_BUILD=${newlib_cv_build_exeext}
-fi
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@EXEEXT_FOR_BUILD@%$EXEEXT_FOR_BUILD%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/doc/configure.in b/newlib/doc/configure.in
deleted file mode 100644
index b116b3538..000000000
--- a/newlib/doc/configure.in
+++ /dev/null
@@ -1,41 +0,0 @@
-dnl This is the newlib/doc configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(makedoc.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../..)
-
-NEWLIB_CONFIGURE(..)
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
-  if test "x$cross_compiling" = "xno"; then
-    CC_FOR_BUILD='$(CC)'
-  else
-    CC_FOR_BUILD=gcc
-  fi
-fi
-AC_SUBST(CC_FOR_BUILD)
-
-# Also set EXEEXT_FOR_BUILD.
-if test "x$cross_compiling" = "xno"; then
-  EXEEXT_FOR_BUILD='$(EXEEXT)'
-else
-  AC_CACHE_CHECK([for build system executable suffix], newlib_cv_build_exeext,
-    [cat > ac_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-    ${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5
-    newlib_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//`
-    rm -f ac_c_test*
-    test x"${newlib_cv_build_exeext}" = x && newlib_cv_build_exeext=no])
-  EXEEXT_FOR_BUILD=""
-  test x"${newlib_cv_build_exeext}" != xno && EXEEXT_FOR_BUILD=${newlib_cv_build_exeext}
-fi
-AC_SUBST(EXEEXT_FOR_BUILD)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/doc/doc.str b/newlib/doc/doc.str
deleted file mode 100644
index 4d557c6f5..000000000
--- a/newlib/doc/doc.str
+++ /dev/null
@@ -1,178 +0,0 @@
-: nokill_bogus_lines ;
-
-: ENDDD
-	skip_past_newline
-	;
-
-: TABLE
-	skip_past_newline
-	"@table @code\n" catstr
-	;
-
-: ENDTABLE
-	skip_past_newline
-	"@end table\n"
-	catstr
-	;
-
-: QUICKREF
-	skip_past_newline
-	get_stuff_in_command
-	"&&~&&~&&\cr\tablerule\n"
-	quickref
-	;
-
-
-: ITEM 
-	"@item " catstr ;
-
-: EXAMPLE
-	skip_past_newline	
-
-	get_stuff_in_command nokill_bogus_lines translatecomments 
-	courierize catstr
-
-	;
-
-: INODE 
-	"@node " catstr skip_past_newline copy_past_newline catstr 
-	;
-
-: CODE_FRAGMENT
-	EXAMPLE 
-	;
-
-: SYNOPSIS
-	skip_past_newline
-	"@strong{Synopsis}\n" catstr
-	"@example\n" catstr
-	get_stuff_in_command  
-	do_fancy_stuff
-	nokill_bogus_lines
-	indent
-	catstr
-	"@end example\n" catstr
-
-	;
-
-
-: ANSI_SYNOPSIS
-	skip_past_newline
-	"@strong{Synopsis}\n" catstr
-	"@example\n" catstr
-	get_stuff_in_command  
-	do_fancy_stuff
-	nokill_bogus_lines
-	indent
-	catstr
-	"@end example\n" catstr
-
-	;
-
-: OLDTRAD_SYNOPSIS
-	skip_past_newline
-	"@strong{Traditional Synopsis}\n" catstr
-	"@example\n" catstr
-	get_stuff_in_command  
-	do_fancy_stuff
-	nokill_bogus_lines
-	indent
-	catstr
-	"@end example\n" catstr
-
-	;
-
-: TRAD_SYNOPSIS
-	skip_past_newline
-
-	;
-
-: INDEX 
-	"@findex " skip_past_newline copy_past_newline catstr catstr 
-	;
-
-: FUNCTION
-	"@node "	- a
-	skip_past_newline
-	copy_past_newline
-	dup		- a x x 
-	get_stuff_in_angle -a x y
-	swap
-	do_fancy_stuff
-	"@section " - a x x b 
-	swap
-	remchar
-	"\n" - a x b x c
-	catstr  catstr 	catstr 	catstr 	catstr 
-	;
-
-: bodytext
-	get_stuff_in_command 
-	bulletize
-	courierize
-	do_fancy_stuff
-	catstr
-	"@*\n" catstr
-	;
-
-: asection
-	skip_past_newline
-	catstr
-	copy_past_newline 	
-	do_fancy_stuff catstr 	
-	bodytext	
-	;
-
-: SECTION 
-	"@section " asection  ;
-
-: SUBSECTION
-	"@section " asection  ;
-
-: SUBSUBSECTION
-	"@subsection " asection  ;
-
-: subhead
-	skip_past_newline
-	bodytext
-	;
-
-
-	
-: DESCRIPTION 
-	"@strong{Description}@*\n" catstr subhead ;
-
-: RETURNS
-	"@strong{Returns}@*\n" catstr subhead ;
-
-: ERRORS
-	"@strong{Errors}@*\n" catstr subhead ;
-
-
-: PORTABILITY
-	"@strong{Portability}@*\n" catstr subhead ;
-
-
-: WARNINGS
-	"@strong{Warnings}@*\n" catstr subhead ;
-
-
-
-: INTERNAL_FUNCTION
-	func ;
-
-
-: INTERNAL_DEFINITION 
-	func ;
-
-
-: INTERNAL
-	func ;
-
-: TYPEDEF
-	FUNCTION ;
-
-
-
-: NEWPAGE
-	"@page\n" catstr subhead ;
diff --git a/newlib/doc/makedoc.c b/newlib/doc/makedoc.c
deleted file mode 100644
index 12dfc90dd..000000000
--- a/newlib/doc/makedoc.c
+++ /dev/null
@@ -1,1469 +0,0 @@
-/* chew
-   Copyright (C) 1990-1992 Free Software Foundation, Inc.
-   Contributed by steve chamberlain @cygnus
-
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- Yet another way of extracting documentation from source.
- No, I haven't finished it yet, but I hope you people like it better
- that the old way
-  
- sac
-
-Basically, this is a sort of string forth, maybe we should call it
-struth?
-
-You define new words thus:
-: <newword> <oldwords> ;
-There is  no
-
-*/
-
-
-
-#include "ansidecl.h"
-#include <stdio.h>
-#include <ctype.h>
-
-extern PTR malloc();
-extern PTR realloc();
-
-#define DEF_SIZE 5000
-#define STACK 50
-
-int internal_wanted;
-int internal_mode;
-
-
-
-/* Here is a string type ... */
-
-typedef struct buffer 
-{
-    char *ptr;
-    unsigned int write_idx;
-    unsigned int size;
-} string_type;
-
-
-
-
-
-
-
-static void DEFUN(init_string_with_size,(buffer, size),
-	   string_type *buffer AND
-	   unsigned int size )
-{
-  buffer->write_idx = 0;
-  buffer->size = size;
-  buffer->ptr = malloc(size);
-}
-
-static void DEFUN(init_string,(buffer),
-	   string_type *buffer)
-{
-    init_string_with_size(buffer, DEF_SIZE);
-
-}
-
-static int DEFUN(find, (str, what),
-	  string_type *str AND
-	  char *what)
-{
-    unsigned int i;
-    char *p;
-    p = what;
-    for (i = 0; i < str->write_idx && *p; i++) 
-    {
-	if (*p == str->ptr[i])
-	 p++;
-	else
-	 p = what;
-    }
-    return (*p == 0);
-    
-}
-
-static void DEFUN(write_buffer,(buffer),
-	   string_type *buffer)
-{
-    fwrite(buffer->ptr, buffer->write_idx, 1, stdout);
-}
-
-
-static void DEFUN(delete_string,(buffer),
-	   string_type *buffer)
-{
-    free(buffer->ptr);
-}
-
-
-static char *DEFUN(addr, (buffer, idx),
-	    string_type *buffer AND
-	    unsigned int idx)
-{
-    return buffer->ptr + idx;
-}
-
-static char DEFUN(at,(buffer, pos),
-	   string_type *buffer AND
-	   unsigned int pos) 
-{
-    if ( pos >= buffer->write_idx) 
-    {
-	return 0;
-    }
-    return buffer->ptr[pos];
-}
-
-static void DEFUN(catchar,(buffer, ch), 
-	   string_type *buffer AND
-	   char ch)
-{
-  if (buffer->write_idx == buffer->size) 
-  {
-    buffer->size *=2;
-    buffer->ptr = realloc(buffer->ptr, buffer->size);
-  }
-
-  buffer->ptr[buffer->write_idx ++ ] = ch;
-}
-
-
-static void DEFUN(overwrite_string,(dst,   src),
-	   string_type *dst AND
-	   string_type *src)
-{
-    free(dst->ptr);
-    dst->size = src->size;
-    dst->write_idx = src->write_idx;
-    dst->ptr = src->ptr;
-}
-
-static void DEFUN(catstr,(dst, src),
-	   string_type *dst AND
-	   string_type *src)
-{
-    unsigned int i;
-    for (i = 0; i < src->write_idx; i++) 
-    {
-	catchar(dst, src->ptr[i]);
-    }
-}
-
-
-static void DEFUN(cattext,(buffer, string),
-	   string_type *buffer AND
-	   char *string)
-{
-    
-    while (*string) 
-    {
-	catchar(buffer, *string);
-	string++;
-    }
-}
-
-static void DEFUN(catbuf,(buffer, buf, len),
-	   string_type *buffer AND
-	   char *buf AND
-	   unsigned int len)
-{
-    
-    while (len--) 
-    {
-	catchar(buffer, *buf);
-	buf++;
-    }
-}
-
-
-
-static unsigned int 
-DEFUN(skip_white_and_stars,(src, idx),
-      string_type *src AND
-      unsigned int idx)
-{
-    while (isspace(at(src,idx)) 
-	   || (at(src,idx) == '*' && at(src,idx +1) !='/')) 
-     idx++;
-    return idx;
-    
-
-}
-/***********************************************************************/
-
-
-string_type stack[STACK];
-string_type *tos;
-
-unsigned int idx = 0; /* Pos in input buffer */
-string_type *ptr; /* and the buffer */
-typedef void (*stinst_type)();
-stinst_type *pc;
-stinst_type sstack[STACK];
-stinst_type *ssp = &sstack[0];
-int istack[STACK];
-int *isp = &istack[0];
-
-typedef int *word_type;
-
-
-
-struct dict_struct
-{
-    char *word;
-    struct dict_struct *next;
-   stinst_type *code;
-    int code_length;
-    int code_end;
-    int var;
-    
-};
-typedef struct dict_struct dict_type;
-#define WORD(x) static void x()
-
-static void DEFUN(exec,(word),
-		  dict_type *word)
-{
-    pc = word->code;
-    while (*pc) 
-    {
-	(*pc)();
-    }
-    
-}
-WORD(call)
-{
-stinst_type *oldpc = pc;
-    dict_type *e;
-    e =  (dict_type *)(pc [1]);
-    exec(e);
-    pc = oldpc + 2;
-    
-}
-
-WORD(remchar)
-{
-    tos->write_idx--;    
-    pc++;
-    
-}
-
-WORD(push_number)
-{
-    isp++;
-    pc++;
-    *isp = (int)(*pc);
-    pc++;
-    
-}
-
-
-
-
-WORD(push_text)
-{
-    
-    tos++;
-    init_string(tos);
-    pc++;
-    cattext(tos,*((char **)pc));
-    pc++;
-    
-}
-
-
-   
-/* This function removes everything not inside comments starting on
-   the first char of the line from the  string, also when copying
-   comments, removes blank space and leading *'s 
-   Blank lines are turned into one blank line
- */
-
-static void 
-DEFUN(remove_noncomments,(src,dst),
-	   string_type *src AND
-	   string_type *dst)
-{
-    unsigned int idx = 0;
-    
-    while (at(src,idx)) 
-    {
-	/* Now see if we have a comment at the start of the line */
-	if (at(src,idx) == '\n' 
-	    && at(src,idx+1) ==  '/' 
-	    && at(src,idx+2) == '*') 
-	{
-	    idx+=3;
-	    
-	    idx = skip_white_and_stars(src,idx);
-
-	    /* Remove leading dot */
-	    if (at(src, idx) == '.')
-	     idx++;
-	    
-	    /* Copy to the end of the line, or till the end of the
-	       comment */
-	    while (at(src, idx))
-	    {
-		if (at(src, idx) == '\n') 
-		{
-		    /* end of line, echo and scrape of leading blanks  */
-		    if (at(src,idx +1) == '\n')
-		     catchar(dst,'\n');
-		    catchar(dst,'\n');
-		    idx++;
-		    idx =   skip_white_and_stars(src, idx);
-		}
-		else if (at(src, idx) == '*' && at(src,idx+1) == '/') 
-		{
-		    idx +=2 ;
-		    cattext(dst,"\nENDDD\n");
-		    break;
-		}
-		else 
-		{
-		    catchar(dst, at(src, idx));
-		    idx++;
-		}
-	    }
-	}
-	else idx++;
-    }
-}
-/* turn foobar name(stuff); into foobar EXFUN(name,(stuff));
-
- */
-
-static void
-DEFUN_VOID(exfunstuff)
-{
-    unsigned int openp;
-    unsigned int fname;
-    unsigned int idx;
-    string_type out;
-    init_string(&out);
-    
-
-    /* make sure that it's not already exfuned */
-    if(find(tos,"EXFUN") || find(tos,"PROTO") || !find(tos,"(")) {
-	    catstr(&out,tos);
-	}
-    else 
-    {
-	
-	/*Find the open paren*/
-	for (openp = 0; at(tos, openp) != '('  && at(tos,openp); openp++)
-	 ;
-
-	fname = openp;
-	/* Step back to the fname */
-	fname--;
-	while (fname && isspace(at(tos, fname)))
-	 fname --;
-	while (fname && !isspace(at(tos,fname)) && at(tos,fname) != '*')
-	 fname--;
-
-	fname++;
-	
-	for (idx = 0; idx < fname; idx++) 
-	{
-	    catchar(&out, at(tos,idx));
-	}
-    
-	cattext(&out,"EXFUN(");
-	for (idx = fname; idx < openp; idx++) 
-	{
-	    catchar(&out, at(tos,idx));
-	}
-	cattext(&out,", ");
-	while (at(tos,idx) && at(tos,idx) !=';') 
-	{
-	    catchar(&out, at(tos, idx));
-	    idx++;
-	}
-	cattext(&out,");\n");
-    }
-    overwrite_string(tos, &out);    
-    pc++;
-    
-}
-
-
-
-/* turn {*
-   and *} into comments */
-
-WORD(translatecomments)
-{
-    unsigned int idx = 0;
-    string_type out;
-    init_string(&out);
-    
-    while (at(tos, idx)) 
-    {
-	if (at(tos,idx) == '{' && at(tos,idx+1) =='*') 
-	{
-	    cattext(&out,"	/*");
-	    idx+=2;
-	}
-	else if (at(tos,idx) == '*' && at(tos,idx+1) =='}') 
-	{
-	    cattext(&out,"*/");
-	    idx+=2;
-	}
-	else  
-	{
-	    catchar(&out, at(tos, idx));
-	    idx++;
-	}
-    }
-
-
-    overwrite_string(tos, &out);
-    
-    pc++;
-    
-}
-
-/* find something like
-   QUICKREF
-     memchar ansi  pure
-
-     into
-     merge with words on tos and output them to stderror
-
-*/
-WORD(quickref)
-{
-  string_type *nos = tos-1;
-  unsigned int scan=0;
-  unsigned int nosscan = 0;
-  unsigned int idx = 0;
-  
-  while (at(tos, idx)) 
-  {
-    if (at(tos,idx) == '~')
-    {
-      /* Skip the whitespace */
-      while (at(nos, nosscan) == ' ')
-       nosscan++;
-    
-      /* Sub the next word from the nos*/
-      while (at(nos, nosscan) != ' ' &&
-	     at(nos, nosscan) != 0)
-      {
-	fprintf(stderr, "%c", at(nos, nosscan));
-	nosscan++;
-      }
-    }
-  
-    else 
-    {
-      fprintf(stderr,"%c", at(tos, idx));
-    
-    }
-    idx++;
-  }
-
-  delete_string(tos);
-  delete_string(nos);
-  tos-=2;
-  pc++;
-  
-}
-
-/* turn everything not starting with a . into a comment */
-
-WORD(manglecomments)
-{
-    unsigned int idx = 0;
-    string_type out;
-    init_string(&out);
-    
-    while (at(tos, idx)) 
-    {
-	if (at(tos,idx) == '\n' && at(tos,idx+1) =='*') 
-	{
-	    cattext(&out,"	/*");
-	    idx+=2;
-	}
-	else if (at(tos,idx) == '*' && at(tos,idx+1) =='}') 
-	{
-	    cattext(&out,"*/");
-	    idx+=2;
-	}
-	else  
-	{
-	    catchar(&out, at(tos, idx));
-	    idx++;
-	}
-    }
-
-
-    overwrite_string(tos, &out);
-    
-    pc++;
-    
-}
-
-/* Mod tos so that only lines with leading dots remain */
-static void
-DEFUN_VOID(outputdots)
-{
-    unsigned int idx = 0;
-    string_type out;
-    init_string(&out);
-    
-    while (at(tos, idx)) 
-    {
-	if (at(tos, idx) == '\n' && at(tos, idx+1) == '.') 
-	{
-	    idx += 2;
-	    
-	    while (at(tos, idx) && at(tos, idx)!='\n')
-	    {
-		if (at(tos,idx) == '{' && at(tos,idx+1) =='*') 
-		{
-		    cattext(&out," /*");
-		    idx+=2;
-		}
-		else if (at(tos,idx) == '*' && at(tos,idx+1) =='}') 
-		{
-		    cattext(&out,"*/");
-		    idx+=2;
-		}
-		else  
-		{
-		    catchar(&out, at(tos, idx));
-		    idx++;
-		}
-	    }
-	    catchar(&out,'\n');
-	}
-	else 
-	{
-	    idx++;
-	}
-    }	
-
-    overwrite_string(tos, &out);
-    pc++;
-    
-}
-
-/* Find lines starting with . and | and put example around them on tos
-   turn 
-   {*  into open comment and *} into close comment
-   escape curlies
-   
-*/
-WORD(courierize)
-{
-    string_type out;
-    unsigned int idx = 0;
-    
-    init_string(&out);
-    
-    while (at(tos, idx)) 
-    {
-	if (at(tos, idx) == '\n' 
-	    && (at(tos, idx +1 ) == '.'
-		|| at(tos,idx+1) == '|')) 
-	{
-	    cattext(&out,"\n@smallexample\n");
-	    do 
-	    {
-		idx += 2;
-		
-		while (at(tos, idx) && at(tos, idx)!='\n')
-		{
-		    if (at(tos,idx)=='{' && at(tos,idx+1) =='*') 
-		    {
-			cattext(&out," /*");
-			idx+=2;
-		    }
-		    else if (at(tos,idx)=='*' && at(tos,idx+1) =='}') 
-		    {
-			cattext(&out,"*/");
-			idx+=2;
-		    }
-	            else if (at(tos,idx) == '{')
-		    {
-			cattext(&out,"@{");
-			idx++;
-		    }
-	            else if (at(tos,idx) == '}')
-		    {
-			cattext(&out,"@}");
-			idx++;
-		    }
-		    else 
-		    {
-			catchar(&out, at(tos, idx));
-			idx++;
-		    }
-		    
-		}
-		catchar(&out,'\n');
-	    }  
-	    while (at(tos, idx) == '\n' 
-		   && (at(tos, idx+1) == '.')
-		   || (at(tos,idx+1) == '|'));
-	    cattext(&out,"@end smallexample");
-	}
-	else 
-	{    
-	    catchar(&out, at(tos, idx));
-	    idx++;
-	}
-    }    
-
-    overwrite_string(tos, &out);
-    pc++;
-
-    
-}
-
-/* 
-   O+  emit @itemize @bullet
-   OO  emit @item
-   O-  emit @end itemize
-
-   o+  emit @table @code
-   oo  @item
-   o-  emit @end table
-*/
-
-
-WORD(bulletize)
-{
-  unsigned int idx = 0;
-  int on = 0;
-  string_type out;
-  init_string(&out);
-    
-  while (at(tos, idx)) {
-      if (at(tos, idx) == '@' &&
-	  at(tos, idx+1) == '*') 
-      {
-	cattext(&out,"*");
-	idx+=2;
-      }
-	
-      else
-       if (at(tos, idx) == '\n' &&  at(tos, idx+1) == 'o')
-       {
-	 if (at(tos,idx+2) == '+') {
-	     cattext(&out,"\n@table @code\n");
-	     idx+=3;
-	   }
-	 else if (at(tos,idx+2) == '-') {
-	     cattext(&out,"\n@end table\n");
-	     idx+=3;
-	   }
-	 else if (isspace(at(tos,idx+2))) {
-	     cattext(&out,"\n@item ");
-	     idx+=3;
-	   }
-	 else {
-	     catchar(&out, at(tos, idx));
-	     idx++;
-	   }
-       }
-      
-       else
-	if (at(tos, idx) == '\n' &&  at(tos, idx+1) == 'O')
-	{
-	  if (at(tos,idx+2) == '+') {
-	      cattext(&out,"\n@itemize @bullet\n");
-	      idx+=3;
-	    }
-
-	  else if (at(tos,idx+2) == '-') {
-	      cattext(&out,"\n@end itemize\n");
-	      idx+=3;
-	    }
-	  else {
-	      catchar(&out, at(tos, idx));
-	      idx++;
-	    }
-	}	      
-	else
-	{
-	  catchar(&out, at(tos, idx));
-	  idx++;
-	}
-    }
-
-  delete_string(tos);
-  *tos = out;
-  pc++;
-    
-}
-
-/* Turn <<foo>> into @code{foo} in place at TOS 
-   Turn <[foo]> into @var{foo} in place at TOS
-   nest them too !
-
-*/
-   
-
-WORD(do_fancy_stuff)
- {
-    unsigned int idx = 0;
-    string_type out;
-    init_string(&out);
-    while (at(tos, idx)) 
-    {
-	if (at(tos, idx) == '<' 
-	    && at(tos, idx+1) == '<'
-	    && (!isspace(at(tos,idx + 2)) || at(tos,idx+3) == '>')) 
-	{
-	    /* This qualifies as a << startup */
-	    idx +=2;
-	    cattext(&out,"@code{");
-	  }
-	
-	else 	if (at(tos, idx) == '<' 
-	    && at(tos, idx+1) == '['
-	    && !isspace(at(tos,idx + 2))) 
-	{
-	    /* This qualifies as a <[ startup */
-	    idx +=2;
-	    cattext(&out,"@var{");
-	  }
-	else if (at(tos, idx) == '>' 
-		 && at(tos,idx+1) =='>') 
-	{
-	  
-	    cattext(&out,"}");
-	    idx+=2;
-	}
-	else if (at(tos, idx) == ']' 
-		 && at(tos,idx+1) =='>') 
-	{
-	    cattext(&out,"}");
-	    idx+=2;
-	}
-	else 
-	{
-	    catchar(&out, at(tos, idx));
-	    idx++;
-	}
-    }
-    delete_string(tos);
-    *tos = out;
-    pc++;
-    
-}
-/* A command is all upper case,and alone on a line */
-static int 
-DEFUN( iscommand,(ptr, idx),
-      string_type *ptr AND
-      unsigned int idx)
-{
-    unsigned int len = 0;
-    while (at(ptr,idx)) {
-	    if (isupper(at(ptr,idx)) || at(ptr,idx) == ' ' ||
-		at(ptr,idx) == '_') 
-	    {
-	     len++;
-	     idx++;
-	 }
-	    else if(at(ptr,idx) == '\n')
-	    {
-		if (len >4) return 1;
-		return 0;
-	    }
-	    else return 0;
-	}
-    return 0;
-
-}
-
-
-DEFUN(copy_past_newline,(ptr, idx, dst),
-      string_type *ptr AND
-      unsigned int idx AND
-      string_type *dst)
-{
-    while (at(ptr, idx) && at(ptr, idx) != '\n') 
-    {
-	catchar(dst, at(ptr, idx));
-	idx++;
-	
-    }    
-    catchar(dst, at(ptr, idx));
-    idx++;
-    return idx;
-
-}
-
-WORD(icopy_past_newline)
-{
-    tos++;
-    init_string(tos);
-    idx = copy_past_newline(ptr, idx, tos);
-    pc++;	
-}
-
-
-/* indent
-   Take the string at the top of the stack, do some prettying */
-
-
-
-
-WORD(kill_bogus_lines)
-{
-    int sl ;
-    
-    int nl = 0;
-    int idx = 0;
-    int c;
-    int dot = 0    ;
-    
-    string_type out;    
-    init_string(&out);
-    /* Drop leading nl */
-    while (at(tos,idx) == '\n')
-    {
-	idx++;
-    }
-    c = idx;
-    
-    /* Find the last char */
-    while (at(tos,idx))
-    {
-	idx++;
-    }
-    
-    /* find the last non white before the nl */
-    idx--;
-    
-    while (idx && isspace(at(tos,idx)))
-     idx--;
-    idx++;
-    
-    /* Copy buffer upto last char, but blank lines before and after
-       dots don't count */
-    sl = 1;
-
-    while (c < idx)
-    {
-	if (at(tos,c) == '\n' 
-	    && at(tos,c+1) == '\n'
-	    && at(tos,c+2) == '.') 
-	{
-	    /* Ignore two linelines before  a dot*/
-	    c++;
-	}
-	else if (at(tos,c) == '.' && sl)
-	{
-	    /* remember that this line started with a dot */
-	    dot=2;
-	}
-	else if (at(tos,c) == '\n' 
-		 && at(tos,c+1) == '\n'
-		 && dot)
-	{
-	    c++;
-	    /* Ignore two newlines when last line was dot */
-	}
-
-	catchar(&out, at(tos,c));
-	if (at(tos,c) == '\n')
-	{
-	    sl = 1;
-	    
-	    if (dot == 2)dot=1;else dot = 0;
-	}
-	
-	c++;	
-
-    }
-    
-    /* Append nl*/
-    catchar(&out, '\n');
-    pc++;
-    delete_string(tos);
-    *tos = out;
-    
-    
-}
-
-WORD(indent)
-{
-    string_type out;
-    int tab = 0;
-    int idx = 0;
-    int ol =0;
-    init_string(&out);
-    while (at(tos,idx)) {
-	    switch (at(tos,idx)) 
-	    {
-	      case '\n':
-		cattext(&out,"\n");
-		idx++;
-		if (tab) 
-		{
-		    cattext(&out,"    ");
-		}
-		ol = 0;
-		break;
-	      case '(':
-		tab++;
-		if (ol == 0)
-		    cattext(&out,"   ");
-		idx++;
-		cattext(&out,"(");
-		ol = 1;
-		break;
-	      case ')':
-		tab--;
-		cattext(&out,")");
-		idx++;
-		ol=1;
-		
-		break;
-	      default:
-		catchar(&out,at(tos,idx));
-		ol=1;
-		
-		idx++;
-		break;
-	    }
-	}	
-
-    pc++;
-    delete_string(tos);
-    *tos = out;
-
-}
-
-/* Change the TOS so that all that is left is the stuff inside the
- first <<foo>> .
-*/
-
-WORD(get_stuff_in_angle)
-{
-  unsigned int idx = 0;
-  string_type out;
-  init_string(&out);
-    
-  while (at(tos, idx)) 
-    {
-      if (at(tos,idx) == '<' && at(tos,idx+1) =='<') 
-	{
-	  idx+=2;
-	  
-	  while (!(at(tos,idx) == '>' && at(tos,idx+1) == '>'))
-	    {
-	      catchar(&out, at(tos, idx));
-	      idx++;
-	    }
-	  break;
-	}
-      idx++;
-    }
-  catchar(&out,'\n');
-  
-  overwrite_string(tos, &out);
-  pc++;
-}
-
-
-WORD(get_stuff_in_command)
-{
-  tos++;
-  init_string(tos);
-
-  while (at(ptr, idx)) {
-    if (iscommand(ptr, idx))  break;
-    idx =   copy_past_newline(ptr, idx, tos);
-  }
-  pc++;    
-}
-
-WORD(swap)
-{
-    string_type t;
-    
-    t = tos[0];
-    tos[0] = tos[-1];
-    tos[-1] =t; 
-    pc++;
-    
-}
-
-WORD(dup)
-{
-    tos++;
-    init_string(tos);
-    catstr(tos, tos-1);
-    pc++;
-    
-}
-
-
-
-WORD(icatstr)
-{
-    catstr(tos-1, tos);
-    delete_string(tos);
-    tos--;
-    pc++;
-    
-}
-
-WORD(skip_past_newline)
-{
-    while (at(ptr,idx) 
-	   && at(ptr,idx) != '\n')
-     idx++;
-    idx++;
-    pc++;
-}
-
-
-WORD(internalmode)
-{
-    internal_mode = *(isp);
-    isp--;
-    pc++;
-}
-
-WORD(maybecatstr)
-{
-    if (internal_wanted == internal_mode) 
-    {
-	catstr(tos-1, tos);
-    }
-    delete_string(tos);
-    tos--;
-    pc++;
-    
-}
-
-char *
-DEFUN(nextword,(string, word),
-      char *string AND
-      char **word)
-{
-  char *word_start;
-  int idx;
-  char *dst;
-  char *src;
-    
-  int length = 0;
-    
-  while (isspace(*string) || *string == '-') {
-      if (*string == '-') 
-      {
-	while (*string && *string != '\n') 
-	 string++;
-		
-      }
-      else {
-	  string++;
-	}
-    }
-  if (!*string) return 0;
-    
-  word_start = string;    	
-  if (*string == '"') 
-  {
-    string++;
-    length++;
-	
-    while (*string != '"') 
-    {
-      string++;
-      length++;
-    }
-  }
-  else     
-  {
-	
-
-    while (!isspace(*string)) 
-    {
-      string++;
-      length++;
-    }
-  }
-    
-  *word = malloc(length + 1);
-
-  dst = *word;
-  src = word_start;
-
-
-  for (idx= 0; idx < length; idx++) 
-  {
-    
-    if (src[idx] == '\\' && src[idx+1] == 'n') 
-    {
-      *dst++ = '\n';
-      idx++;
-    
-    }
-    else *dst++ = src[idx];
-  }
-  *dst++ = 0;
-
-
-
-
-
-  if(*string)    
-   return string + 1;
-  else 
-   return 0;
-    
-}
-dict_type *root;
-dict_type *
-DEFUN(lookup_word,(word),
-      char *word)
-{
-    dict_type *ptr = root;
-    while (ptr) {
-	    if (strcmp(ptr->word, word) == 0) return ptr;
-	    ptr = ptr->next;
-	    
-	 }
-    fprintf(stderr,"Can't find %s\n",word);
-    return 0;
-    
-    
-}
-
-static void DEFUN_VOID(perform)
-{
-    tos = stack;
-    
-    while (at(ptr, idx)) {
-	    /* It's worth looking through the command list */
-	    if (iscommand(ptr, idx))
-	    {
-		unsigned int i;
-		int found = 0;
-
-		char *next;
-		dict_type *word ;
-		
-		(void)		nextword(addr(ptr, idx), &next);
-
-
-		word = lookup_word(next);
-
-
-		
-
-		if (word) 
-		{
-		    exec(word);
-		}
-		else
-		{
-		    fprintf(stderr,"warning, %s is not recognised\n",  next);
-		    skip_past_newline();
-		}
-		
-	    }
-	    else skip_past_newline();
-
-	}
-}
-
-dict_type *
-DEFUN(newentry,(word),
-      char *word)
-{
-    dict_type *new = (dict_type *)malloc(sizeof(dict_type));
-    new->word = word;
-    new->next = root;
-    root = new;
-    new->code = (stinst_type *)malloc(sizeof(stinst_type ));
-    new->code_length = 1;
-    new->code_end = 0;
-    return new;
-    
-}
-
-
-unsigned int
-DEFUN(add_to_definition,(entry, word), 
-      dict_type *entry AND
-      stinst_type word)
-{
-    if (entry->code_end == entry->code_length) 
-    {
-	entry->code_length += 2;
-	entry->code =
-	 (stinst_type *) realloc((char *)(entry->code),
-			       entry->code_length *sizeof(word_type));
-    }
-    entry->code[entry->code_end] = word;
-    
-return     entry->code_end++;  
-}
-
-
-
-
-
-
-
-void
-DEFUN(add_intrinsic,(name, func),
-      char *name AND
-      void (*func)())
-{
-    dict_type *new = newentry(name);
-    add_to_definition(new, func);
-    add_to_definition(new, 0);
-}
-
-WORD(push_addr)
-{
-    
-
-}
-
-void
-DEFUN(add_var,(name),
-      char *name)
-{
-    dict_type *new = newentry(name);
-    add_to_definition(new, push_number);
-    add_to_definition(new, (stinst_type)(&(new->var)));
-    add_to_definition(new,0);
-    
-}
-      
-
-
-
-void 
-DEFUN(compile, (string), 
-      char *string)
-
-{
-    int jstack[STACK];
-    int *jptr = jstack;
-    /* add words to the dictionary */
-    char *word;
-    string = nextword(string, &word);
-    while (string && *string && word[0]) 
-    {
-	if (strcmp(word,"var")==0) 
-	{
- string=nextword(string, &word);
-	  
-	  add_var(word);
- string=nextword(string, &word);
-	}
-else	
-	    
-	if (word[0] == ':')
-	{
-	    dict_type *ptr;
-	    /* Compile a word and add to dictionary */
-	    string = nextword(string, &word);
-	    
-	    ptr = newentry(word);
-	    string = nextword(string, &word);
-	    while (word[0] != ';' ) 
-	    {
-		 switch (word[0]) 
-		 {
-		    
-		    
-		   case '"':
-		     /* got a string, embed magic push string
-			function */
-		     add_to_definition(ptr, push_text);
-		     add_to_definition(ptr, (stinst_type)(word+1));
-		     break;
-		   case '0':
-		   case '1':
-		   case '2':
-		   case '3':
-		   case '4':
-		   case '5':
-		   case '6':
-		   case '7':
-		   case '8':
-		   case '9':
-		     /* Got a number, embedd the magic push number
-			function */
-		     add_to_definition(ptr, push_number);
-		     add_to_definition(ptr, atol(word));
-		     break;
-		   default:
-		     add_to_definition(ptr, call);
-		     add_to_definition(ptr, lookup_word(word));
-		 }
-
-		string = nextword(string, &word);		     
-	    }
-	    add_to_definition(ptr,0);
-	    string = nextword(string, &word);
-	}
-	else 
-	{
-	    fprintf(stderr,"syntax error at %s\n",string-1);
-	}	    
-    }
-
-}
-
- 
-static void DEFUN_VOID(bang)
-{
-*(int *)((isp[0])) = isp[-1];
-isp-=2;
-pc++;
-
-}
-
-WORD(atsign)
-{
-    isp[0] = *(int *)(isp[0]);
-    pc++;
-}
-
-WORD(hello)
-{
-    
-    printf("hello\n");
-    pc++;    
-}
-
-
-
-static void DEFUN(read_in, (str, file), 
-	   string_type *str AND
-		  FILE *file)
-{
-    char buff[10000];    
-    unsigned int r;
-    do 
-    {
-	r = fread(buff, 1, sizeof(buff), file);
-	catbuf(str, buff, r);
-    }
-    while (r);
-    buff[0] = 0;
-    
-    catbuf(str, buff,1);
-    
-}
-
-
-static void DEFUN_VOID(usage)
-{
-    fprintf(stderr,"usage: -[d|i|g] <file >file\n");
-    exit(33);    
-}
-
-int DEFUN(main,(ac,av),
-int ac AND
-char *av[])
-{
-    unsigned int i;
-    
-
-    string_type buffer;
-    string_type pptr;
-    
-
-    init_string(&buffer);
-    init_string(&pptr);
-    init_string(stack+0);
-    tos=stack+1;
-    ptr = &pptr;
-    
-    add_intrinsic("push_text", push_text);
-    add_intrinsic("!", bang);
-    add_intrinsic("@", atsign);
-    add_intrinsic("hello",hello);    
-    add_intrinsic("skip_past_newline", skip_past_newline );
-    add_intrinsic("catstr", icatstr );
-    add_intrinsic("copy_past_newline", icopy_past_newline );
-    add_intrinsic("dup", dup );
-    add_intrinsic("remchar", remchar );
-    add_intrinsic("get_stuff_in_command", get_stuff_in_command );
-    add_intrinsic("get_stuff_in_angle", get_stuff_in_angle );
-    add_intrinsic("do_fancy_stuff", do_fancy_stuff );
-    add_intrinsic("bulletize", bulletize );
-    add_intrinsic("courierize", courierize );
-    add_intrinsic("swap", swap );
-    add_intrinsic("outputdots", outputdots );
-    add_intrinsic("exfunstuff", exfunstuff );
-    add_intrinsic("maybecatstr", maybecatstr );
-    add_intrinsic("translatecomments", translatecomments );
-    add_intrinsic("kill_bogus_lines", kill_bogus_lines);
-    add_intrinsic("indent", indent);
-    add_intrinsic("quickref", quickref);
-    add_intrinsic("internalmode", internalmode);
-    
-    /* Put a nl at the start */
-    catchar(&buffer,'\n');
-
-    read_in(&buffer, stdin); 
-    remove_noncomments(&buffer, ptr);
-    for (i= 1; i < ac; i++) 
-    {
-	if (av[i][0] == '-')
-	{
-	    if (av[i][1] == 'f')
-	    {
-		string_type b;
-		FILE *f;
-		init_string(&b);
-
-		f  = fopen(av[i+1],"r");
-		if (!f) 
-		{
-		  fprintf(stderr,"Can't open the input file %s\n",av[i+1]);
-		  return 33;
-		}
-		
-		  
-		read_in(&b, f);
-		compile(b.ptr);
-		perform();	
-	    }
-	    else    if (av[i][1] == 'i') 
-	    {
-		internal_wanted = 1;
-	    }
-	}
-
-    }      
-    write_buffer(stack+0);
-    return 0;
-}
-
-
-
diff --git a/newlib/iconvdata/EUC-JP.irreversible b/newlib/iconvdata/EUC-JP.irreversible
deleted file mode 100644
index 1921ac8f6..000000000
--- a/newlib/iconvdata/EUC-JP.irreversible
+++ /dev/null
@@ -1,2 +0,0 @@
-0x5C	0x00A5
-0x7E	0x203E
diff --git a/newlib/iconvdata/Makefile.am b/newlib/iconvdata/Makefile.am
deleted file mode 100644
index 33138d22d..000000000
--- a/newlib/iconvdata/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir) -I$(srcdir)/../libc/sys/linux $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-if ELIX_LEVEL_1
-LIB_OBJS = 
-else
-LIB_OBJS = euc-jp.$(oext) jis0201.$(oext) jis0208.$(oext) jis0212.$(oext)
-endif
-
-AM_CFLAGS = -DNDEBUG
-
-all: Makefile
-
-pkglib_LTLIBRARIES = EUC-JP.la
-EUC_JP_la_SOURCES = dummy.c
-EUC_JP_la_LIBADD = $(LIB_OBJS)
-EUC_JP_la_DEPENDENCIES = $(LIB_OBJS)
-EUC_JP_la_LDFLAGS = -module -no-undefined -Xcompiler -Wl,-rpath-link=.. -Xcompiler -nostdlib -L.. -lc
-
-install-data-local: install-pkglibLTLIBRARIES $(srcdir)/gconv-modules
-	$(INSTALL_DATA) $(srcdir)/gconv-modules $(DESTDIR)$(pkglibdir)/gconv-modules
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/iconvdata/Makefile.in b/newlib/iconvdata/Makefile.in
deleted file mode 100644
index 954ad0266..000000000
--- a/newlib/iconvdata/Makefile.in
+++ /dev/null
@@ -1,393 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir) -I$(srcdir)/../libc/sys/linux $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@euc-jp.$(oext) jis0201.$(oext) jis0208.$(oext) jis0212.$(oext)
-
-AM_CFLAGS = -DNDEBUG
-
-pkglib_LTLIBRARIES = EUC-JP.la
-EUC_JP_la_SOURCES = dummy.c
-EUC_JP_la_LIBADD = $(LIB_OBJS)
-EUC_JP_la_DEPENDENCIES = $(LIB_OBJS)
-EUC_JP_la_LDFLAGS = -module -no-undefined -Xcompiler -Wl,-rpath-link=.. -Xcompiler -nostdlib -L.. -lc
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LTLIBRARIES =  $(pkglib_LTLIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-EUC_JP_la_OBJECTS =  dummy.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(EUC_JP_la_SOURCES)
-OBJECTS = $(EUC_JP_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../acinclude.m4 \
-		../aclocal.m4 ../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-pkglibLTLIBRARIES:
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-
-distclean-pkglibLTLIBRARIES:
-
-maintainer-clean-pkglibLTLIBRARIES:
-
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(pkglibdir)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(pkglibdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(pkglibdir)/$$p; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-EUC-JP.la: $(EUC_JP_la_OBJECTS) $(EUC_JP_la_DEPENDENCIES)
-	$(LINK) -rpath $(pkglibdir) $(EUC_JP_la_LDFLAGS) $(EUC_JP_la_OBJECTS) $(EUC_JP_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am: install-pkglibLTLIBRARIES
-install-exec: install-exec-am
-
-install-data-am: install-data-local
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-pkglibLTLIBRARIES
-uninstall: uninstall-am
-all-am: Makefile $(LTLIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(pkglibdir)
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-pkglibLTLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-pkglibLTLIBRARIES clean-compile clean-libtool \
-		clean-tags clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-pkglibLTLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-pkglibLTLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-pkglibLTLIBRARIES distclean-pkglibLTLIBRARIES \
-clean-pkglibLTLIBRARIES maintainer-clean-pkglibLTLIBRARIES \
-uninstall-pkglibLTLIBRARIES install-pkglibLTLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-local \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
-
-
-all: Makefile
-
-install-data-local: install-pkglibLTLIBRARIES $(srcdir)/gconv-modules
-	$(INSTALL_DATA) $(srcdir)/gconv-modules $(DESTDIR)$(pkglibdir)/gconv-modules
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/iconvdata/SJIS.irreversible b/newlib/iconvdata/SJIS.irreversible
deleted file mode 100644
index c3c28e253..000000000
--- a/newlib/iconvdata/SJIS.irreversible
+++ /dev/null
@@ -1,5 +0,0 @@
-0x5C	0x005C
-0x7E	0x007E
-0x8191	0xFFE0
-0x8192	0xFFE1
-0x81CA	0xFFE2
diff --git a/newlib/iconvdata/aclocal.m4 b/newlib/iconvdata/aclocal.m4
deleted file mode 100644
index ad4b48ec4..000000000
--- a/newlib/iconvdata/aclocal.m4
+++ /dev/null
@@ -1,1181 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/iconvdata/configure b/newlib/iconvdata/configure
deleted file mode 100755
index c0756ff4d..000000000
--- a/newlib/iconvdata/configure
+++ /dev/null
@@ -1,3291 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=jis0201.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:598: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:651: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:708: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:741: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 746 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:774: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 779 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}.."
-  fi
-else
-  newlib_basedir="${srcdir}/.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:933: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:954: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:972: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1015: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1028: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1041: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1054: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1067: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1092: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1122: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1171: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1180: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1195: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1226: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1258: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1290: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1322: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1367: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1421: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1455: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1671: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1722: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1754: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1765 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1796: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1801: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1829: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1872: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1902: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1905: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1940: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1957: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1969: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2007: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2028: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2201: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2207: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2231: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2293: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2364: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2396: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2431: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2463: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2530 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2568: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2581 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2618: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2650: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2685: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2717: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2752: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2784: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2820: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2825 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2854: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2859 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2866: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/iconvdata/configure.in b/newlib/iconvdata/configure.in
deleted file mode 100644
index 7aee56866..000000000
--- a/newlib/iconvdata/configure.in
+++ /dev/null
@@ -1,21 +0,0 @@
-dnl This is the newlib/iconvdata configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(jis0201.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../..)
-
-NEWLIB_CONFIGURE(..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/iconvdata/dummy.c b/newlib/iconvdata/dummy.c
deleted file mode 100644
index 9b13d4b4a..000000000
--- a/newlib/iconvdata/dummy.c
+++ /dev/null
@@ -1 +0,0 @@
-/* empty file to force proper Makefile creation */
diff --git a/newlib/iconvdata/euc-jp.c b/newlib/iconvdata/euc-jp.c
deleted file mode 100644
index 1a638994a..000000000
--- a/newlib/iconvdata/euc-jp.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* Mapping tables for EUC-JP handling.
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <stdint.h>
-#include <gconv.h>
-#include <jis0201.h>
-#include <jis0208.h>
-#include <jis0212.h>
-
-/* Definitions used in the body of the `gconv' function.  */
-#define CHARSET_NAME		"EUC-JP//"
-#define FROM_LOOP		from_euc_jp
-#define TO_LOOP			to_euc_jp
-#define DEFINE_INIT		1
-#define DEFINE_FINI		1
-#define MIN_NEEDED_FROM		1
-#define MAX_NEEDED_FROM		3
-#define MIN_NEEDED_TO		4
-
-
-/* First define the conversion function from EUC-JP to UCS4.  */
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MAX_NEEDED_INPUT	MAX_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t ch = *inptr;						      \
-									      \
-    if (ch < 0x8e || (ch >= 0x90 && ch <= 0x9f))			      \
-      ++inptr;								      \
-    else if (ch == 0xff)						      \
-      {									      \
-	/* This is illegal.  */						      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	++inptr;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-    else								      \
-      {									      \
-	/* Two or more byte character.  First test whether the next	      \
-	   character is also available.  */				      \
-	int ch2;							      \
-									      \
-	if (__builtin_expect (inptr + 1 >= inend, 0))			      \
-	  {								      \
-	    /* The second character is not available.  Store the	      \
-	       intermediate result.  */					      \
-	    result = __GCONV_INCOMPLETE_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	ch2 = inptr[1];							      \
-									      \
-	/* All second bytes of a multibyte character must be >= 0xa1. */      \
-	if (__builtin_expect (ch2 < 0xa1, 0))				      \
-	  {								      \
-	    /* This is an illegal character.  */			      \
-	    if (! ignore_errors_p ())					      \
-	      {								      \
-		result = __GCONV_ILLEGAL_INPUT;				      \
-		break;							      \
-	      }								      \
-									      \
-	    ++inptr;							      \
-	    ++*irreversible;						      \
-	    continue;							      \
-	  }								      \
-									      \
-	if (ch == 0x8e)							      \
-	  {								      \
-	    /* This is code set 2: half-width katakana.  */		      \
-	    ch = jisx0201_to_ucs4 (ch2);				      \
-	    if (__builtin_expect (ch, 0) == __UNKNOWN_10646_CHAR)	      \
-	      {								      \
-		/* Illegal character.  */				      \
-		if (! ignore_errors_p ())				      \
-		  {							      \
-		    /* This is an illegal character.  */		      \
-		    result = __GCONV_ILLEGAL_INPUT;			      \
-		    break;						      \
-		  }							      \
-	      }								      \
-									      \
-	    inptr += 2;							      \
-	  }								      \
-	else								      \
-	  {								      \
-	    const unsigned char *endp;					      \
-									      \
-	    if (ch == 0x8f)						      \
-	      {								      \
-		/* This is code set 3: JIS X 0212-1990.  */		      \
-		endp = inptr + 1;					      \
-									      \
-		ch = jisx0212_to_ucs4 (&endp, inend - endp, 0x80);	      \
-	      }								      \
-	    else							      \
-	      {								      \
-		/* This is code set 1: JIS X 0208.  */			      \
-		endp = inptr;						      \
-									      \
-		ch = jisx0208_to_ucs4 (&endp, inend - inptr, 0x80);	      \
-	      }								      \
-									      \
-	    if (__builtin_expect (ch, 1) == 0)				      \
-	      {								      \
-		/* Not enough input available.  */			      \
-		result = __GCONV_INCOMPLETE_INPUT;			      \
-		break;							      \
-	      }								      \
-	    if (__builtin_expect (ch, 0) == __UNKNOWN_10646_CHAR)	      \
-	      {								      \
-		/* Illegal character.  */				      \
-		if (! ignore_errors_p ())				      \
-		  {							      \
-		    /* This is an illegal character.  */		      \
-		    result = __GCONV_ILLEGAL_INPUT;			      \
-		    break;						      \
-		  }							      \
-									      \
-		inptr += 2;						      \
-		++*irreversible;					      \
-		continue;						      \
-	      }								      \
-	    inptr = endp;						      \
-	  }								      \
-      }									      \
-									      \
-    put32 (outptr, ch);							      \
-    outptr += 4;							      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-
-
-/* Next, define the other direction.  */
-#define MIN_NEEDED_INPUT	MIN_NEEDED_TO
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_FROM
-#define MAX_NEEDED_OUTPUT	MAX_NEEDED_FROM
-#define LOOPFCT			TO_LOOP
-#define BODY \
-  {									      \
-    uint32_t ch = get32 (inptr);					      \
-									      \
-    if (ch < 0x8e || (ch >= 0x90 && ch <= 0x9f))			      \
-      /* It's plain ASCII or C1.  */					      \
-      *outptr++ = ch;							      \
-    else if (ch == 0xa5)						      \
-      /* YEN sign => backslash  */					      \
-      *outptr++ = 0x5c;							      \
-    else if (ch == 0x203e)						      \
-      /* overscore => asciitilde */					      \
-      *outptr++ = 0x7e;							      \
-    else								      \
-      {									      \
-	/* Try the JIS character sets.  */				      \
-	size_t found;							      \
-									      \
-	/* See whether we have room for at least two characters.  */	      \
-	if (__builtin_expect (outptr + 1 >= outend, 0))			      \
-	  {								      \
-	    result = __GCONV_FULL_OUTPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	found = ucs4_to_jisx0201 (ch, outptr + 1);			      \
-	if (found != __UNKNOWN_10646_CHAR)				      \
-	  {								      \
-	    /* Yes, it's a JIS 0201 character.  Store the shift byte.  */     \
-	    *outptr = 0x8e;						      \
-	    outptr += 2;						      \
-	  }								      \
-	else								      \
-	  {								      \
-	    /* No JIS 0201 character.  */				      \
-	    found = ucs4_to_jisx0208 (ch, outptr, 2);			      \
-	    /* Please note that we always have enough room for the output. */ \
-	    if (found != __UNKNOWN_10646_CHAR)				      \
-	      {								      \
-		/* It's a JIS 0208 character, adjust it for EUC-JP.  */	      \
-		*outptr++ += 0x80;					      \
-		*outptr++ += 0x80;					      \
-	      }								      \
-	    else							      \
-	      {								      \
-		/* No JIS 0208 character.  */				      \
-		found = ucs4_to_jisx0212 (ch, outptr + 1,		      \
-					  outend - outptr - 1);		      \
-		  							      \
-		if (__builtin_expect (found, 1) == 0)			      \
-		  {							      \
-		    /* We ran out of space.  */				      \
-		    result = __GCONV_FULL_OUTPUT;			      \
-		    break;						      \
-		  }							      \
-		else if (__builtin_expect (found, 0) != __UNKNOWN_10646_CHAR) \
-		  {							      \
-		    /* It's a JIS 0212 character, adjust it for EUC-JP.  */   \
-		    *outptr++ = 0x8f;					      \
-		    *outptr++ += 0x80;					      \
-		    *outptr++ += 0x80;					      \
-		  }							      \
-		else							      \
-		  {							      \
-		    UNICODE_TAG_HANDLER (ch, 4);			      \
-									      \
-		    /* Illegal character.  */				      \
-		    STANDARD_ERR_HANDLER (4);				      \
-		  }							      \
-	      }								      \
-	  }								      \
-      }									      \
-									      \
-    inptr += 4;								      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-
-
-/* Now define the toplevel functions.  */
-#include <iconv/skeleton.c>
diff --git a/newlib/iconvdata/gconv-modules b/newlib/iconvdata/gconv-modules
deleted file mode 100644
index 66bb47377..000000000
--- a/newlib/iconvdata/gconv-modules
+++ /dev/null
@@ -1,1511 +0,0 @@
-# GNU libc iconv configuration.
-# Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-# This file is part of the GNU C Library.
-#
-
-# The GNU C Library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-
-# The GNU C Library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-
-# You should have received a copy of the GNU Lesser General Public
-# License along with the GNU C Library; if not, write to the Free
-# Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-# 02111-1307 USA.
-
-# All lines contain the following information:
-
-# If the lines start with `module'
-#  fromset:	either a name triple or a regular expression triple.
-#  toset:	a name triple or an expression with \N to get regular
-#		expression matching results.
-#  filename:	filename of the module implementing the transformation.
-#		If it is not absolute the path is made absolute by prepending
-#		the directory the configuration file is found in.
-#  cost:	optional cost of the transformation.  Default is 1.
-
-# If the lines start with `alias'
-#  alias:	alias name which is not really recognized.
-#  name:	the real name of the character set
-
-alias	ISO-IR-4//		BS_4730//
-alias	ISO646-GB//		BS_4730//
-alias	GB//			BS_4730//
-alias	UK//			BS_4730//
-alias	CSISO4UNITEDKINGDOM//	BS_4730//
-module	BS_4730//		INTERNAL		ISO646		2
-module	INTERNAL		BS_4730//		ISO646		2
-
-alias	ISO-IR-121//		CSA_Z243.4-1985-1//
-alias	ISO646-CA//		CSA_Z243.4-1985-1//
-alias	CSA7-1//		CSA_Z243.4-1985-1//
-alias	CA//			CSA_Z243.4-1985-1//
-alias	CSISO121CANADIAN1//	CSA_Z243.4-1985-1//
-alias	CSA_Z243.419851//	CSA_Z243.4-1985-1//
-module	CSA_Z243.4-1985-1//	INTERNAL		ISO646		2
-module	INTERNAL		CSA_Z243.4-1985-1//	ISO646		2
-
-alias	ISO-IR-122//		CSA_Z243.4-1985-2//
-alias	ISO646-CA2//		CSA_Z243.4-1985-2//
-alias	CSA7-2//		CSA_Z243.4-1985-2//
-alias	CSISO122CANADIAN2//	CSA_Z243.4-1985-2//
-alias	CSA_Z243.419852//	CSA_Z243.4-1985-2//
-module	CSA_Z243.4-1985-2//	INTERNAL		ISO646		2
-module	INTERNAL		CSA_Z243.4-1985-2//	ISO646		2
-
-alias	ISO-IR-21//		DIN_66003//
-alias	DE//			DIN_66003//
-alias	ISO646-DE//		DIN_66003//
-alias	CSISO21GERMAN//		DIN_66003//
-module	DIN_66003//		INTERNAL		ISO646		2
-module	INTERNAL		DIN_66003//		ISO646		2
-
-alias	DS2089//		DS_2089//
-alias	ISO646-DK//		DS_2089//
-alias	DK//			DS_2089//
-alias	CSISO646DANISH//	DS_2089//
-module	DS_2089//		INTERNAL		ISO646		2
-module	INTERNAL		DS_2089//		ISO646		2
-
-alias	ISO-IR-17//		ES//
-alias	ISO646-ES//		ES//
-alias	CSISO17SPANISH//	ES//
-module	ES//			INTERNAL		ISO646		2
-module	INTERNAL		ES//			ISO646		2
-
-alias	ISO-IR-85//		ES2//
-alias	ISO646-ES2//		ES2//
-alias	CSISO85SPANISH2//	ES2//
-module	ES2//			INTERNAL		ISO646		2
-module	INTERNAL		ES2//			ISO646		2
-
-alias	ISO-IR-57//		GB_1988-80//
-alias	CN//			GB_1988-80//
-alias	ISO646-CN//		GB_1988-80//
-alias	CSISO58GB1988//		GB_1988-80//
-alias	GB_198880//		GB_1988-80//
-module	GB_1988-80//		INTERNAL		ISO646		2
-module	INTERNAL		GB_1988-80//		ISO646		2
-
-alias	ISO-IR-15//		IT//
-alias	ISO646-IT//		IT//
-alias	CSISO15ITALIAN//	IT//
-module	IT//			INTERNAL		ISO646		2
-module	INTERNAL		IT//			ISO646		2
-
-alias	ISO-IR-14//		JIS_C6220-1969-RO//
-alias	JP//			JIS_C6220-1969-RO//
-alias	ISO646-JP//		JIS_C6220-1969-RO//
-alias	CSISO14JISC6220RO//	JIS_C6220-1969-RO//
-alias	JIS_C62201969RO//	JIS_C6220-1969-RO//
-module	JIS_C6220-1969-RO//	INTERNAL		ISO646		2
-module	INTERNAL		JIS_C6220-1969-RO//	ISO646		2
-
-alias	ISO-IR-92//		JIS_C6229-1984-B//
-alias	ISO646-JP-OCR-B//	JIS_C6229-1984-B//
-alias	JP-OCR-B//		JIS_C6229-1984-B//
-alias	CSISO92JISC62991984B//	JIS_C6229-1984-B//
-alias	JIS_C62291984B//	JIS_C6229-1984-B//
-module	JIS_C6229-1984-B//	INTERNAL		ISO646		2
-module	INTERNAL		JIS_C6229-1984-B//	ISO646		2
-
-alias	ISO-IR-141//		JUS_I.B1.002//
-alias	ISO646-YU//		JUS_I.B1.002//
-alias	JS//			JUS_I.B1.002//
-alias	YU//			JUS_I.B1.002//
-alias	CSISO141JUSIB1002//	JUS_I.B1.002//
-module	JUS_I.B1.002//		INTERNAL		ISO646		2
-module	INTERNAL		JUS_I.B1.002//		ISO646		2
-
-alias	ISO646-KR//		KSC5636//
-alias	CSKSC5636//		KSC5636//
-module	KSC5636//		INTERNAL		ISO646		2
-module	INTERNAL		KSC5636//		ISO646		2
-
-alias	ISO-IR-86//		MSZ_7795.3//
-alias	ISO646-HU//		MSZ_7795.3//
-alias	HU//			MSZ_7795.3//
-alias	CSISO86HUNGARIAN//	MSZ_7795.3//
-module	MSZ_7795.3//		INTERNAL		ISO646		2
-module	INTERNAL		MSZ_7795.3//		ISO646		2
-
-alias	CUBA//			NC_NC00-10//
-alias	NC_NC00-10:81//		NC_NC00-10//
-alias	ISO-IR-151//		NC_NC00-10//
-alias	ISO646-CU//		NC_NC00-10//
-alias	CSISO151CUBA//		NC_NC00-10//
-alias	NC_NC0010//		NC_NC00-10//
-module	NC_NC00-10//		INTERNAL		ISO646		2
-module	INTERNAL		NC_NC00-10//		ISO646		2
-
-alias	ISO-IR-69//		NF_Z_62-010//
-alias	ISO646-FR//		NF_Z_62-010//
-alias	FR//			NF_Z_62-010//
-alias	CSISO69FRENCH//		NF_Z_62-010//
-alias	NF_Z_62010//		NF_Z_62-010//
-module	NF_Z_62-010//		INTERNAL		ISO646		2
-module	INTERNAL		NF_Z_62-010//		ISO646		2
-
-alias	ISO-IR-25//		NF_Z_62-010_1973//
-alias	ISO646-FR1//		NF_Z_62-010_1973//
-alias	NF_Z_62-010_(1973)//	NF_Z_62-010_1973//
-alias	CSISO25FRENCH//		NF_Z_62-010_1973//
-alias	NF_Z_62010_1973//	NF_Z_62-010_1973//
-module	NF_Z_62-010_1973//	INTERNAL		ISO646		2
-module	INTERNAL		NF_Z_62-010_1973//	ISO646		2
-
-alias	ISO-IR-60//		NS_4551-1//
-alias	ISO646-NO//		NS_4551-1//
-alias	NO//			NS_4551-1//
-alias	CSISO60DANISHNORWEGIAN// NS_4551-1//
-alias	CSISO60NORWEGIAN1//	NS_4551-1//
-alias	NS_45511//		NS_4551-1//
-module	NS_4551-1//		INTERNAL		ISO646		2
-module	INTERNAL		NS_4551-1//		ISO646		2
-
-alias	ISO646-NO2//		NS_4551-2//
-alias	ISO-IR-61//		NS_4551-2//
-alias	NO2//			NS_4551-2//
-alias	CSISO61NORWEGIAN2//	NS_4551-2//
-alias	NS_45512//		NS_4551-2//
-module	NS_4551-2//		INTERNAL		ISO646		2
-module	INTERNAL		NS_4551-2//		ISO646		2
-
-alias	ISO-IR-16//		PT//
-alias	ISO646-PT//		PT//
-alias	CSISO16PORTUGESE//	PT//
-module	PT//			INTERNAL		ISO646		2
-module	INTERNAL		PT//			ISO646		2
-
-alias	ISO-IR-84//		PT2//
-alias	ISO646-PT2//		PT2//
-alias	CSISO84PORTUGUESE2//	PT2//
-module	PT2//			INTERNAL		ISO646		2
-module	INTERNAL		PT2//			ISO646		2
-
-alias	ISO-IR-10//		SEN_850200_B//
-alias	FI//			SEN_850200_B//
-alias	ISO646-FI//		SEN_850200_B//
-alias	ISO646-SE//		SEN_850200_B//
-alias	SE//			SEN_850200_B//
-alias	CSISO10SWEDISH//	SEN_850200_B//
-alias	SS636127//		SEN_850200_B//
-module	SEN_850200_B//		INTERNAL		ISO646		2
-module	INTERNAL		SEN_850200_B//		ISO646		2
-
-alias	ISO-IR-11//		SEN_850200_C//
-alias	ISO646-SE2//		SEN_850200_C//
-alias	SE2//			SEN_850200_C//
-alias	CSISO11SWEDISHFORNAMES// SEN_850200_C//
-module	SEN_850200_C//		INTERNAL		ISO646		2
-module	INTERNAL		SEN_850200_C//		ISO646		2
-
-#	from			to			module		cost
-alias	ISO-IR-100//		ISO-8859-1//
-alias	ISO_8859-1:1987//	ISO-8859-1//
-alias	ISO_8859-1//		ISO-8859-1//
-alias	ISO8859-1//		ISO-8859-1//
-alias	ISO88591//		ISO-8859-1//
-alias	LATIN1//		ISO-8859-1//
-alias	L1//			ISO-8859-1//
-alias	IBM819//		ISO-8859-1//
-alias	CP819//			ISO-8859-1//
-alias	CSISOLATIN1//		ISO-8859-1//
-alias	8859_1//		ISO-8859-1//
-alias	OSF00010001//		ISO-8859-1//
-module	ISO-8859-1//		INTERNAL		ISO8859-1	1
-module	INTERNAL		ISO-8859-1//		ISO8859-1	1
-
-#	from			to			module		cost
-alias	ISO-IR-101//		ISO-8859-2//
-alias	ISO_8859-2:1987//	ISO-8859-2//
-alias	ISO_8859-2//		ISO-8859-2//
-alias	ISO8859-2//		ISO-8859-2//
-alias	ISO88592//		ISO-8859-2//
-alias	LATIN2//		ISO-8859-2//
-alias	L2//			ISO-8859-2//
-alias	CSISOLATIN2//		ISO-8859-2//
-alias	8859_2//		ISO-8859-2//
-alias	OSF00010002//		ISO-8859-2//
-alias	IBM912//		ISO-8859-2//
-alias	CP912//			ISO-8859-2//
-module	ISO-8859-2//		INTERNAL		ISO8859-2	1
-module	INTERNAL		ISO-8859-2//		ISO8859-2	1
-
-#	from			to			 module		cost
-alias	ISO-IR-109//		ISO-8859-3//
-alias	ISO_8859-3:1988//	ISO-8859-3//
-alias	ISO_8859-3//		ISO-8859-3//
-alias	ISO8859-3//		ISO-8859-3//
-alias	ISO88593//		ISO-8859-3//
-alias	LATIN3//		ISO-8859-3//
-alias	L3//			ISO-8859-3//
-alias	CSISOLATIN3//		ISO-8859-3//
-alias	8859_3//		ISO-8859-3//
-alias	OSF00010003//		ISO-8859-3//
-module	ISO-8859-3//		INTERNAL		ISO8859-3	1
-module	INTERNAL		ISO-8859-3//		ISO8859-3	1
-
-#	from			to			module		cost
-alias	ISO-IR-110//		ISO-8859-4//
-alias	ISO_8859-4:1988//	ISO-8859-4//
-alias	ISO_8859-4//		ISO-8859-4//
-alias	ISO8859-4//		ISO-8859-4//
-alias	ISO88594//		ISO-8859-4//
-alias	LATIN4//		ISO-8859-4//
-alias	L4//			ISO-8859-4//
-alias	CSISOLATIN4//		ISO-8859-4//
-alias	8859_4//		ISO-8859-4//
-alias	OSF00010004//		ISO-8859-4//
-module	ISO-8859-4//		INTERNAL		ISO8859-4	1
-module	INTERNAL		ISO-8859-4//		ISO8859-4	1
-
-#	from			to			module		cost
-alias	ISO-IR-144//		ISO-8859-5//
-alias	ISO_8859-5:1988//	ISO-8859-5//
-alias	ISO_8859-5//		ISO-8859-5//
-alias	ISO8859-5//		ISO-8859-5//
-alias	ISO88595//		ISO-8859-5//
-alias	CYRILLIC//		ISO-8859-5//
-alias	CSISOLATINCYRILLIC//	ISO-8859-5//
-alias	8859_5//		ISO-8859-5//
-alias	OSF00010005//		ISO-8859-5//
-alias	IBM915//		ISO-8859-5//
-alias	CP915//			ISO-8859-5//
-module	ISO-8859-5//		INTERNAL		ISO8859-5	1
-module	INTERNAL		ISO-8859-5//		ISO8859-5	1
-
-#	from			to			module		cost
-alias	ISO-IR-127//		ISO-8859-6//
-alias	ISO_8859-6:1987//	ISO-8859-6//
-alias	ISO_8859-6//		ISO-8859-6//
-alias	ISO8859-6//		ISO-8859-6//
-alias	ISO88596//		ISO-8859-6//
-alias	ECMA-114//		ISO-8859-6//
-alias	ASMO-708//		ISO-8859-6//
-alias	ARABIC//		ISO-8859-6//
-alias	CSISOLATINARABIC//	ISO-8859-6//
-alias	8859_6//		ISO-8859-6//
-alias	OSF00010006//		ISO-8859-6//
-alias	IBM1089//		ISO-8859-6//
-alias	CP1089//		ISO-8859-6//
-module	ISO-8859-6//		INTERNAL		ISO8859-6	1
-module	INTERNAL		ISO-8859-6//		ISO8859-6	1
-
-#	from			to			module		cost
-alias	ISO-IR-126//		ISO-8859-7//
-alias	ISO_8859-7:1987//	ISO-8859-7//
-alias	ISO_8859-7//		ISO-8859-7//
-alias	ISO8859-7//		ISO-8859-7//
-alias	ISO88597//		ISO-8859-7//
-alias	ELOT_928//		ISO-8859-7//
-alias	ECMA-118//		ISO-8859-7//
-alias	GREEK//			ISO-8859-7//
-alias	GREEK8//		ISO-8859-7//
-alias	CSISOLATINGREEK//	ISO-8859-7//
-alias	8859_7//		ISO-8859-7//
-alias	OSF00010007//		ISO-8859-7//
-alias	IBM813//		ISO-8859-7//
-alias	CP813//			ISO-8859-7//
-module	ISO-8859-7//		INTERNAL		ISO8859-7	1
-module	INTERNAL		ISO-8859-7//		ISO8859-7	1
-
-#	from			to			module		cost
-alias	ISO-IR-138//		ISO-8859-8//
-alias	ISO_8859-8:1988//	ISO-8859-8//
-alias	ISO_8859-8//		ISO-8859-8//
-alias	ISO8859-8//		ISO-8859-8//
-alias	ISO88598//		ISO-8859-8//
-alias	HEBREW//		ISO-8859-8//
-alias	CSISOLATINHEBREW//	ISO-8859-8//
-alias	8859_8//		ISO-8859-8//
-alias	OSF00010008//		ISO-8859-8//
-alias	IBM916//		ISO-8859-8//
-alias	CP916//			ISO-8859-8//
-module	ISO-8859-8//		INTERNAL		ISO8859-8	1
-module	INTERNAL		ISO-8859-8//		ISO8859-8	1
-
-#	from			to			module		cost
-alias	ISO-IR-148//		ISO-8859-9//
-alias	ISO_8859-9:1989//	ISO-8859-9//
-alias	ISO_8859-9//		ISO-8859-9//
-alias	ISO8859-9//		ISO-8859-9//
-alias	ISO88599//		ISO-8859-9//
-alias	LATIN5//		ISO-8859-9//
-alias	L5//			ISO-8859-9//
-alias	CSISOLATIN5//		ISO-8859-9//
-alias	8859_9//		ISO-8859-9//
-alias	OSF00010009//		ISO-8859-9//
-alias	IBM920//		ISO-8859-9//
-alias	CP920//			ISO-8859-9//
-alias	TS-5881//		ISO-8859-9//
-alias	ECMA-128//		ISO-8859-9//
-module	ISO-8859-9//		INTERNAL		ISO8859-9	1
-module	INTERNAL		ISO-8859-9//		ISO8859-9	1
-
-#	from			to			module		cost
-alias	ISO-IR-157//		ISO-8859-10//
-alias	ISO_8859-10:1992//	ISO-8859-10//
-alias	ISO_8859-10//		ISO-8859-10//
-alias	ISO8859-10//		ISO-8859-10//
-alias	ISO885910//		ISO-8859-10//
-alias	LATIN6//		ISO-8859-10//
-alias	L6//			ISO-8859-10//
-alias	CSISOLATIN6//		ISO-8859-10//
-alias	OSF0001000A//		ISO-8859-10//
-module	ISO-8859-10//		INTERNAL		ISO8859-10	1
-module	INTERNAL		ISO-8859-10//		ISO8859-10	1
-
-#	from			to			module		cost
-module	ISO-8859-11//		INTERNAL		ISO8859-11	1
-module	INTERNAL		ISO-8859-11//		ISO8859-11	1
-
-#	from			to			module		cost
-alias	ISO8859-13//		ISO-8859-13//
-alias	ISO885913//		ISO-8859-13//
-alias	ISO-IR-179//		ISO-8859-13//
-alias	LATIN7//		ISO-8859-13//
-alias	L7//			ISO-8859-13//
-alias	BALTIC//		ISO-8859-13//
-module	ISO-8859-13//		INTERNAL		ISO8859-13	1
-module	INTERNAL		ISO-8859-13//		ISO8859-13	1
-
-#	from			to			module		cost
-alias	ISO8859-14//		ISO-8859-14//
-alias	ISO885914//		ISO-8859-14//
-alias	ISO-IR-199//		ISO-8859-14//
-alias	LATIN8//		ISO-8859-14//
-alias	L8//			ISO-8859-14//
-alias	ISO_8859-14:1998//	ISO-8859-14//
-alias	ISO_8859-14//		ISO-8859-14//
-alias	ISO-CELTIC//		ISO-8859-14//
-module	ISO-8859-14//		INTERNAL		ISO8859-14	1
-module	INTERNAL		ISO-8859-14//		ISO8859-14	1
-
-#	from			to			module		cost
-alias	ISO8859-15//		ISO-8859-15//
-alias	ISO885915//		ISO-8859-15//
-alias	ISO-IR-203//		ISO-8859-15//
-alias	ISO_8859-15:1998//	ISO-8859-15//
-module	ISO-8859-15//		INTERNAL		ISO8859-15	1
-module	INTERNAL		ISO-8859-15//		ISO8859-15	1
-
-#	from			to			module		cost
-alias	ISO8859-16//		ISO-8859-16//
-alias	ISO885916//		ISO-8859-16//
-alias	ISO-IR-226//		ISO-8859-16//
-alias	LATIN10//		ISO-8859-16//
-alias	L10//			ISO-8859-16//
-module	ISO-8859-16//		INTERNAL		ISO8859-16	1
-module	INTERNAL		ISO-8859-16//		ISO8859-16	1
-
-#	from			to			module		cost
-alias	T.61//			T.61-8BIT//
-alias	ISO-IR-103//		T.61-8BIT//
-alias	CSISO103T618BIT//	T.61-8BIT//
-alias	T.618BIT//		T.61-8BIT//
-module	T.61-8BIT//		INTERNAL		T.61		1
-module	INTERNAL		T.61-8BIT//		T.61		1
-
-#	from			to			module		cost
-alias	ISO-IR-156//		ISO_6937//
-alias	ISO_6937:1992//		ISO_6937//
-alias	ISO6937//		ISO_6937//
-module	ISO_6937//		INTERNAL		ISO_6937	1
-module	INTERNAL		ISO_6937//		ISO_6937	1
-
-
-#	from			to			module		cost
-alias	ISO-IR-90//		ISO_6937-2//
-alias	ISO_6937-2:1983//	ISO_6937-2//
-alias	CSISO90//		ISO_6937-2//
-alias	ISO_69372//		ISO_6937-2//
-module	ISO_6937-2//		INTERNAL		ISO_6937-2	1
-module	INTERNAL		ISO_6937-2//		ISO_6937-2	1
-
-#	from			to			module		cost
-alias	SHIFT-JIS//		SJIS//
-alias	SHIFT_JIS//		SJIS//
-alias	CP932//			SJIS//
-alias	MS_KANJI//		SJIS//
-alias	CSSHIFTJIS//		SJIS//
-module	SJIS//			INTERNAL		SJIS		1
-module	INTERNAL		SJIS//			SJIS		1
-
-#	from			to			module		cost
-alias	KOI8//			KOI-8//
-module	KOI-8//			INTERNAL		KOI-8		1
-module	INTERNAL		KOI-8//			KOI-8		1
-
-#	from			to			module		cost
-alias	CSKOI8R//		KOI8-R//
-alias	KOI8R//			KOI8-R//
-module	KOI8-R//		INTERNAL		KOI8-R		1
-module	INTERNAL		KOI8-R//		KOI8-R		1
-
-#	from			to			module		cost
-alias	ISO-IR-19//		LATIN-GREEK//
-alias	CSISO19LATINGREEK//	LATIN-GREEK//
-alias	LATINGREEK//		LATIN-GREEK//
-module	LATIN-GREEK//		INTERNAL		LATIN-GREEK	1
-module	INTERNAL		LATIN-GREEK//		LATIN-GREEK	1
-
-#	from			to			module		cost
-alias	ISO-IR-27//		LATIN-GREEK-1//
-alias	CSISO27LATINGREEK1//	LATIN-GREEK-1//
-alias	LATINGREEK1//		LATIN-GREEK-1//
-module	LATIN-GREEK-1//		INTERNAL		LATIN-GREEK-1	1
-module	INTERNAL		LATIN-GREEK-1//		LATIN-GREEK-1	1
-
-#	from			to			module		cost
-alias	ROMAN8//		HP-ROMAN8//
-alias	R8//			HP-ROMAN8//
-alias	CSHPROMAN8//		HP-ROMAN8//
-alias	OSF10010001//		HP-ROMAN8//
-alias	HPROMAN8//		HP-ROMAN8//
-module	HP-ROMAN8//		INTERNAL		HP-ROMAN8	1
-module	INTERNAL		HP-ROMAN8//		HP-ROMAN8	1
-
-#	from			to			module		cost
-alias	CSEBCDICATDE//		EBCDIC-AT-DE//
-alias	EBCDICATDE//		EBCDIC-AT-DE//
-module	EBCDIC-AT-DE//		INTERNAL		EBCDIC-AT-DE	1
-module	INTERNAL		EBCDIC-AT-DE//		EBCDIC-AT-DE	1
-
-#	from			to			module		cost
-alias	CSEBCDICATDEA//		EBCDIC-AT-DE-A//
-alias	EBCDICATDEA//		EBCDIC-AT-DE-A//
-module	EBCDIC-AT-DE-A//	INTERNAL		EBCDIC-AT-DE-A	1
-module	INTERNAL		EBCDIC-AT-DE-A//	EBCDIC-AT-DE-A	1
-
-#	from			to			module		cost
-alias	CSEBCDICCAFR//		EBCDIC-CA-FR//
-alias	EBCDICCAFR//		EBCDIC-CA-FR//
-module	EBCDIC-CA-FR//		INTERNAL		EBCDIC-CA-FR	1
-module	INTERNAL		EBCDIC-CA-FR//		EBCDIC-CA-FR	1
-
-#	from			to			module		cost
-alias	CSEBCDICDKNO//		EBCDIC-DK-NO//
-alias	EBCDICDKNO//		EBCDIC-DK-NO//
-module	EBCDIC-DK-NO//		INTERNAL		EBCDIC-DK-NO	1
-module	INTERNAL		EBCDIC-DK-NO//		EBCDIC-DK-NO	1
-
-#	from			to			module		cost
-alias	CSEBCDICDKNOA//		EBCDIC-DK-NO-A//
-alias	EBCDICDKNOA//		EBCDIC-DK-NO-A//
-module	EBCDIC-DK-NO-A//	INTERNAL		EBCDIC-DK-NO-A	1
-module	INTERNAL		EBCDIC-DK-NO-A//	EBCDIC-DK-NO-A	1
-
-#	from			to			module		cost
-alias	CSEBCDICES//		EBCDIC-ES//
-alias	EBCDICES//		EBCDIC-ES//
-module	EBCDIC-ES//		INTERNAL		EBCDIC-ES	1
-module	INTERNAL		EBCDIC-ES//		EBCDIC-ES	1
-
-#	from			to			module		cost
-alias	CSEBCDICESA//		EBCDIC-ES-A//
-alias	EBCDICESA//		EBCDIC-ES-A//
-module	EBCDIC-ES-A//		INTERNAL		EBCDIC-ES-A	1
-module	INTERNAL		EBCDIC-ES-A//		EBCDIC-ES-A	1
-
-#	from			to			module		cost
-alias	CSEBCDICESS//		EBCDIC-ES-S//
-alias	EBCDICESS//		EBCDIC-ES-S//
-module	EBCDIC-ES-S//		INTERNAL		EBCDIC-ES-S	1
-module	INTERNAL		EBCDIC-ES-S//		EBCDIC-ES-S	1
-
-#	from			to			module		cost
-alias	CSEBCDICFISE//		EBCDIC-FI-SE//
-alias	EBCDICFISE//		EBCDIC-FI-SE//
-module	EBCDIC-FI-SE//		INTERNAL		EBCDIC-FI-SE	1
-module	INTERNAL		EBCDIC-FI-SE//		EBCDIC-FI-SE	1
-
-#	from			to			module		cost
-alias	CSEBCDICFISEA//		EBCDIC-FI-SE-A//
-alias	EBCDICFISEA//		EBCDIC-FI-SE-A//
-module	EBCDIC-FI-SE-A//	INTERNAL		EBCDIC-FI-SE-A	1
-module	INTERNAL		EBCDIC-FI-SE-A//	EBCDIC-FI-SE-A	1
-
-#	from			to			module		cost
-alias	CSEBCDICFR//		EBCDIC-FR//
-alias	EBCDICFR//		EBCDIC-FR//
-module	EBCDIC-FR//		INTERNAL		EBCDIC-FR	1
-module	INTERNAL		EBCDIC-FR//		EBCDIC-FR	1
-
-#	from			to			module		cost
-alias	EBCDICISFRISS//		EBCDIC-IS-FRISS//
-module	EBCDIC-IS-FRISS//	INTERNAL		EBCDIC-IS-FRISS	1
-module	INTERNAL		EBCDIC-IS-FRISS//	EBCDIC-IS-FRISS	1
-
-#	from			to			module		cost
-alias	CSEBCDICIT//		EBCDIC-IT//
-alias	EBCDICIT//		EBCDIC-IT//
-module	EBCDIC-IT//		INTERNAL		EBCDIC-IT	1
-module	INTERNAL		EBCDIC-IT//		EBCDIC-IT	1
-
-#	from			to			module		cost
-alias	CSEBCDICPT//		EBCDIC-PT//
-alias	EBCDICPT//		EBCDIC-PT//
-module	EBCDIC-PT//		INTERNAL		EBCDIC-PT	1
-module	INTERNAL		EBCDIC-PT//		EBCDIC-PT	1
-
-#	from			to			module		cost
-alias	CSEBCDICUK//		EBCDIC-UK//
-alias	EBCDICUK//		EBCDIC-UK//
-module	EBCDIC-UK//		INTERNAL		EBCDIC-UK	1
-module	INTERNAL		EBCDIC-UK//		EBCDIC-UK	1
-
-#	from			to			module		cost
-alias	CSEBCDICUS//		EBCDIC-US//
-alias	EBCDICUS//		EBCDIC-US//
-module	EBCDIC-US//		INTERNAL		EBCDIC-US	1
-module	INTERNAL		EBCDIC-US//		EBCDIC-US	1
-
-#	from			to			module		cost
-alias	CP037//			IBM037//
-alias	EBCDIC-CP-US//		IBM037//
-alias	EBCDIC-CP-CA//		IBM037//
-alias	EBCDIC-CP-WT//		IBM037//
-alias	EBCDIC-CP-NL//		IBM037//
-alias	CSIBM037//		IBM037//
-alias	OSF10020025//		IBM037//
-alias	CP1070//		IBM037//
-alias	CP282//			IBM037//
-module	IBM037//		INTERNAL		IBM037		1
-module	INTERNAL		IBM037//		IBM037		1
-
-#	from			to			module		cost
-alias	EBCDIC-INT//		IBM038//
-alias	CP038//			IBM038//
-alias	CSIBM038//		IBM038//
-module	IBM038//		INTERNAL		IBM038		1
-module	INTERNAL		IBM038//		IBM038		1
-
-#	from			to			module		cost
-alias	EBCDIC-INT1//		IBM256//
-module	IBM256//		INTERNAL		IBM256		1
-module	INTERNAL		IBM256//		IBM256		1
-
-#	from			to			module		cost
-alias	CP273//			IBM273//
-alias	CSIBM273//		IBM273//
-alias	OSF10020111//		IBM273//
-module	IBM273//		INTERNAL		IBM273		1
-module	INTERNAL		IBM273//		IBM273		1
-
-#	from			to			module		cost
-alias	EBCDIC-BE//		IBM274//
-alias	CP274//			IBM274//
-alias	CSIBM274//		IBM274//
-module	IBM274//		INTERNAL		IBM274		1
-module	INTERNAL		IBM274//		IBM274		1
-
-#	from			to			module		cost
-alias	EBCDIC-BR//		IBM275//
-alias	CP275//			IBM275//
-alias	CSIBM275//		IBM275//
-module	IBM275//		INTERNAL		IBM275		1
-module	INTERNAL		IBM275//		IBM275		1
-
-#	from			to			module		cost
-alias	EBCDIC-CP-DK//		IBM277//
-alias	EBCDIC-CP-NO//		IBM277//
-alias	CSIBM277//		IBM277//
-alias	OSF10020115//		IBM277//
-module	IBM277//		INTERNAL		IBM277		1
-module	INTERNAL		IBM277//		IBM277		1
-
-#	from			to			module		cost
-alias	CP278//			IBM278//
-alias	EBCDIC-CP-FI//		IBM278//
-alias	EBCDIC-CP-SE//		IBM278//
-alias	CSIBM278//		IBM278//
-alias	OSF10020116//		IBM278//
-module	IBM278//		INTERNAL		IBM278		1
-module	INTERNAL		IBM278//		IBM278		1
-
-#	from			to			module		cost
-alias	CP280//			IBM280//
-alias	EBCDIC-CP-IT//		IBM280//
-alias	CSIBM280//		IBM280//
-alias	OSF10020118//		IBM280//
-module	IBM280//		INTERNAL		IBM280		1
-module	INTERNAL		IBM280//		IBM280		1
-
-#	from			to			module		cost
-alias	EBCDIC-JP-E//		IBM281//
-alias	CP281//			IBM281//
-alias	CSIBM281//		IBM281//
-module	IBM281//		INTERNAL		IBM281		1
-module	INTERNAL		IBM281//		IBM281		1
-
-#	from			to			module		cost
-alias	CP284//			IBM284//
-alias	EBCDIC-CP-ES//		IBM284//
-alias	CSIBM284//		IBM284//
-alias	OSF1002011C//		IBM284//
-alias	CP1079//		IBM284//
-module	IBM284//		INTERNAL		IBM284		1
-module	INTERNAL		IBM284//		IBM284		1
-
-#	from			to			module		cost
-alias	CP285//			IBM285//
-alias	EBCDIC-CP-GB//		IBM285//
-alias	CSIBM285//		IBM285//
-alias	OSF1002011D//		IBM285//
-module	IBM285//		INTERNAL		IBM285		1
-module	INTERNAL		IBM285//		IBM285		1
-
-#	from			to			module		cost
-alias	CP290//			IBM290//
-alias	EBCDIC-JP-KANA//	IBM290//
-alias	CSIBM290//		IBM290//
-alias	OSF10020122//		IBM290//
-module	IBM290//		INTERNAL		IBM290		1
-module	INTERNAL		IBM290//		IBM290		1
-
-#	from			to			module		cost
-alias	CP297//			IBM297//
-alias	EBCDIC-CP-FR//		IBM297//
-alias	CSIBM297//		IBM297//
-alias	OSF10020129//		IBM297//
-alias	CP1081//		IBM297//
-module	IBM297//		INTERNAL		IBM297		1
-module	INTERNAL		IBM297//		IBM297		1
-
-#	from			to			module		cost
-alias	CP420//			IBM420//
-alias	EBCDIC-CP-AR1//		IBM420//
-alias	CSIBM420//		IBM420//
-alias	OSF100201A4//		IBM420//
-module	IBM420//		INTERNAL		IBM420		1
-module	INTERNAL		IBM420//		IBM420		1
-
-#	from			to			module		cost
-alias	CP423//			IBM423//
-alias	EBCDIC-CP-GR//		IBM423//
-alias	CSIBM423//		IBM423//
-module	IBM423//		INTERNAL		IBM423		1
-module	INTERNAL		IBM423//		IBM423		1
-
-#	from			to			module		cost
-alias	CP424//			IBM424//
-alias	EBCDIC-CP-HE//		IBM424//
-alias	CSIBM424//		IBM424//
-alias	OSF100201A8//		IBM424//
-module	IBM424//		INTERNAL		IBM424		1
-module	INTERNAL		IBM424//		IBM424		1
-
-#	from			to			module		cost
-alias	CP437//			IBM437//
-alias	437//			IBM437//
-alias	CSPC8CODEPAGE437//	IBM437//
-alias	OSF100201B5//		IBM437//
-module	IBM437//		INTERNAL		IBM437		1
-module	INTERNAL		IBM437//		IBM437		1
-
-#	from			to			module		cost
-alias	CP500//			IBM500//
-alias	500//			IBM500//
-alias	500V1//			IBM500//
-alias	EBCDIC-CP-BE//		IBM500//
-alias	EBCDIC-CP-CH//		IBM500//
-alias	CSIBM500//		IBM500//
-alias	OSF100201F4//		IBM500//
-alias	CP1084//		IBM500//
-module	IBM500//		INTERNAL		IBM500		1
-module	INTERNAL		IBM500//		IBM500		1
-
-#	from			to			module		cost
-alias	CP850//			IBM850//
-alias	850//			IBM850//
-alias	CSPC850MULTILINGUAL//	IBM850//
-alias	OSF10020352//		IBM850//
-module	IBM850//		INTERNAL		IBM850		1
-module	INTERNAL		IBM850//		IBM850		1
-
-#	from			to			module		cost
-alias	CP851//			IBM851//
-alias	851//			IBM851//
-alias	CSIBM851//		IBM851//
-module	IBM851//		INTERNAL		IBM851		1
-module	INTERNAL		IBM851//		IBM851		1
-
-#	from			to			module		cost
-alias	CP852//			IBM852//
-alias	852//			IBM852//
-alias	CSPCP852//		IBM852//
-alias	OSF10020354//		IBM852//
-module	IBM852//		INTERNAL		IBM852		1
-module	INTERNAL		IBM852//		IBM852		1
-
-#	from			to			module		cost
-alias	CP855//			IBM855//
-alias	855//			IBM855//
-alias	CSIBM855//		IBM855//
-alias	OSF10020357//		IBM855//
-module	IBM855//		INTERNAL		IBM855		1
-module	INTERNAL		IBM855//		IBM855		1
-
-#	from			to			module		cost
-alias	IBM-856//		IBM856//
-alias	CP856//			IBM856//
-alias	856//			IBM856//
-alias	CSIBM856//		IBM856//
-module	IBM856//		INTERNAL		IBM856		1
-module	INTERNAL		IBM856//		IBM856		1
-
-#	from			to			module		cost
-alias	CP857//			IBM857//
-alias	857//			IBM857//
-alias	CSIBM857//		IBM857//
-alias	OSF10020359//		IBM857//
-module	IBM857//		INTERNAL		IBM857		1
-module	INTERNAL		IBM857//		IBM857		1
-
-#	from			to			module		cost
-alias	CP860//			IBM860//
-alias	860//			IBM860//
-alias	CSIBM860//		IBM860//
-module	IBM860//		INTERNAL		IBM860		1
-module	INTERNAL		IBM860//		IBM860		1
-
-#	from			to			module		cost
-alias	CP861//			IBM861//
-alias	861//			IBM861//
-alias	CPIBM861//		IBM861//
-alias	OSF1002035D//		IBM861//
-module	IBM861//		INTERNAL		IBM861		1
-module	INTERNAL		IBM861//		IBM861		1
-
-#	from			to			module		cost
-alias	CP862//			IBM862//
-alias	862//			IBM862//
-alias	CSPC862LATINHEBREW//	IBM862//
-alias	OSF1002035E//		IBM862//
-module	IBM862//		INTERNAL		IBM862		1
-module	INTERNAL		IBM862//		IBM862		1
-
-#	from			to			module		cost
-alias	CP863//			IBM863//
-alias	863//			IBM863//
-alias	CSIBM863//		IBM863//
-alias	OSF1002035F//		IBM863//
-module	IBM863//		INTERNAL		IBM863		1
-module	INTERNAL		IBM863//		IBM863		1
-
-#	from			to			module		cost
-alias	CP864//			IBM864//
-alias	864//			IBM864//
-alias	CSIBM864//		IBM864//
-alias	OSF10020360//		IBM864//
-module	IBM864//		INTERNAL		IBM864		1
-module	INTERNAL		IBM864//		IBM864		1
-
-#	from			to			module		cost
-alias	CP865//			IBM865//
-alias	865//			IBM865//
-alias	CSIBM865//		IBM865//
-module	IBM865//		INTERNAL		IBM865		1
-module	INTERNAL		IBM865//		IBM865		1
-
-#	from			to			module		cost
-alias	CP866//			IBM866//
-alias	866//			IBM866//
-alias	CSIBM866//		IBM866//
-module	IBM866//		INTERNAL		IBM866		1
-module	INTERNAL		IBM866//		IBM866		1
-
-#	from			to			module		cost
-alias	CP868//			IBM868//
-alias	CP-AR//			IBM868//
-alias	CSIBM868//		IBM868//
-alias	OSF10020364//		IBM868//
-module	IBM868//		INTERNAL		IBM868		1
-module	INTERNAL		IBM868//		IBM868		1
-
-#	from			to			module		cost
-alias	CP869//			IBM869//
-alias	869//			IBM869//
-alias	CP-GR//			IBM869//
-alias	CSIBM869//		IBM869//
-alias	OSF10020365//		IBM869//
-module	IBM869//		INTERNAL		IBM869		1
-module	INTERNAL		IBM869//		IBM869		1
-
-#	from			to			module		cost
-alias	CP870//			IBM870//
-alias	EBCDIC-CP-ROECE//	IBM870//
-alias	EBCDIC-CP-YU//		IBM870//
-alias	CSIBM870//		IBM870//
-alias	OSF10020366//		IBM870//
-module	IBM870//		INTERNAL		IBM870		1
-module	INTERNAL		IBM870//		IBM870		1
-
-#	from			to			module		cost
-alias	CP871//			IBM871//
-alias	EBCDIC-CP-IS//		IBM871//
-alias	CSIBM871//		IBM871//
-alias	OSF10020367//		IBM871//
-module	IBM871//		INTERNAL		IBM871		1
-module	INTERNAL		IBM871//		IBM871		1
-
-#	from			to			module		cost
-alias	CP875//			IBM875//
-alias	EBCDIC-GREEK//		IBM875//
-alias	OSF1002036B//		IBM875//
-module	IBM875//		INTERNAL		IBM875		1
-module	INTERNAL		IBM875//		IBM875		1
-
-#	from			to			module		cost
-alias	CP880//			IBM880//
-alias	EBCDIC-CYRILLIC//	IBM880//
-alias	CSIBM880//		IBM880//
-alias	OSF10020370//		IBM880//
-module	IBM880//		INTERNAL		IBM880		1
-module	INTERNAL		IBM880//		IBM880		1
-
-#	from			to			module		cost
-alias	CP891//			IBM891//
-alias	CSIBM891//		IBM891//
-alias	OSF1002037B//		IBM891//
-module	IBM891//		INTERNAL		IBM891		1
-module	INTERNAL		IBM891//		IBM891		1
-
-#	from			to			module		cost
-alias	CP903//			IBM903//
-alias	CSIBM903//		IBM903//
-alias	OSF10020387//		IBM903//
-module	IBM903//		INTERNAL		IBM903		1
-module	INTERNAL		IBM903//		IBM903		1
-
-#	from			to			module		cost
-alias	CP904//			IBM904//
-alias	904//			IBM904//
-alias	CSIBM904//		IBM904//
-alias	OSF10020388//		IBM904//
-module	IBM904//		INTERNAL		IBM904		1
-module	INTERNAL		IBM904//		IBM904		1
-
-#	from			to			module		cost
-alias	CP905//			IBM905//
-alias	EBCDIC-CP-TR//		IBM905//
-alias	CSIBM905//		IBM905//
-module	IBM905//		INTERNAL		IBM905		1
-module	INTERNAL		IBM905//		IBM905		1
-
-#	from			to			module		cost
-alias	CP918//			IBM918//
-alias	EBCDIC-CP-AR2//		IBM918//
-alias	CSIBM918//		IBM918//
-alias	OSF10020396//		IBM918//
-module	IBM918//		INTERNAL		IBM918		1
-module	INTERNAL		IBM918//		IBM918		1
-
-#	from			to			module		cost
-alias	IBM-922//		IBM922//
-alias	CP922//			IBM922//
-alias	CSIBM922//		IBM922//
-module	IBM922//		INTERNAL		IBM922		1
-module	INTERNAL		IBM922//		IBM922		1
-
-#	from			to			module		cost
-alias	IBM-930//		IBM930//
-alias	CP930//			IBM930//
-alias	EBCDIC-CP-AR2//		IBM930//
-alias	CSIBM930//		IBM930//
-module	IBM930//		INTERNAL		IBM930		1
-module	INTERNAL		IBM930//		IBM930		1
-
-#	from			to			module		cost
-alias	IBM-932//		IBM932//
-alias	CSIBM932//		IBM932//
-module	IBM932//		INTERNAL		IBM932		1
-module	INTERNAL		IBM932//		IBM932		1
-
-#	from			to			module		cost
-alias	IBM-933//		IBM933//
-alias	CP933//			IBM933//
-alias	EBCDIC-CP-AR2//		IBM933//
-alias	CSIBM933//		IBM933//
-module	IBM933//		INTERNAL		IBM933		1
-module	INTERNAL		IBM933//		IBM933		1
-
-#	from			to			module		cost
-alias	IBM-935//		IBM935//
-alias	CP935//			IBM935//
-alias	EBCDIC-CP-AR2//		IBM935//
-alias	CSIBM935//		IBM935//
-module	IBM935//		INTERNAL		IBM935		1
-module	INTERNAL		IBM935//		IBM935		1
-
-#	from			to			module		cost
-alias	IBM-937//		IBM937//
-alias	CP937//			IBM937//
-alias	EBCDIC-CP-AR2//		IBM937//
-alias	CSIBM937//		IBM937//
-module	IBM937//		INTERNAL		IBM937		1
-module	INTERNAL		IBM937//		IBM937		1
-
-#	from			to			module		cost
-alias	IBM-939//		IBM939//
-alias	CP939//			IBM939//
-alias	EBCDIC-CP-AR2//		IBM939//
-alias	CSIBM939//		IBM939//
-module	IBM939//		INTERNAL		IBM939		1
-module	INTERNAL		IBM939//		IBM939		1
-
-#	from			to			module		cost
-alias	IBM-943//		IBM943//
-alias	CSIBM943//		IBM943//
-module	IBM943//		INTERNAL		IBM943		1
-module	INTERNAL		IBM943//		IBM943		1
-
-#	from			to			module		cost
-alias	CP1004//		IBM1004//
-alias	OS2LATIN1//		IBM1004//
-module	IBM1004//		INTERNAL		IBM1004		1
-module	INTERNAL		IBM1004//		IBM1004		1
-
-#	from			to			module		cost
-alias	CP1026//		IBM1026//
-alias	1026//			IBM1026//
-alias	CSIBM1026//		IBM1026//
-alias	OSF10020402//		IBM1026//
-module	IBM1026//		INTERNAL		IBM1026		1
-module	INTERNAL		IBM1026//		IBM1026		1
-
-#	from			to			module		cost
-alias	IBM-1046//		IBM1046//
-alias	CP1046//		IBM1046//
-alias	1046//			IBM1046//
-module	IBM1046//		INTERNAL		IBM1046		1
-module	INTERNAL		IBM1046//		IBM1046		1
-
-#	from			to			module		cost
-alias	CP1047//		IBM1047//
-alias	1047//			IBM1047//
-alias	OSF10020417//		IBM1047//
-module	IBM1047//		INTERNAL		IBM1047		1
-module	INTERNAL		IBM1047//		IBM1047		1
-
-#	from			to			module		cost
-alias	IBM-1124//		IBM1124//
-alias	CP1124//		IBM1124//
-alias	CSIBM1124//		IBM1124//
-module	IBM1124//		INTERNAL		IBM1124		1
-module	INTERNAL		IBM1124//		IBM1124		1
-
-#	from			to			module		cost
-alias	IBM-1129//		IBM1129//
-alias	CP1129//		IBM1129//
-alias	CSIBM1129//		IBM1129//
-module	IBM1129//		INTERNAL		IBM1129		1
-module	INTERNAL		IBM1129//		IBM1129		1
-
-#	from			to			module		cost
-alias	IBM-1160//		IBM1160//
-alias	CP1160//		IBM1160//
-alias	CSIBM1160//		IBM1160//
-module	IBM1160//		INTERNAL		IBM1160		1
-module	INTERNAL		IBM1160//		IBM1160		1
-
-#	from			to			module		cost
-alias	IBM-1161//		IBM1161//
-alias	CP1161//		IBM1161//
-alias	CSIBM1161//		IBM1161//
-module	IBM1161//		INTERNAL		IBM1161		1
-module	INTERNAL		IBM1161//		IBM1161		1
-
-#	from			to			module		cost
-alias	IBM-1132//		IBM1132//
-alias	CP1132//		IBM1132//
-alias	CSIBM1132//		IBM1132//
-module	IBM1132//		INTERNAL		IBM1132		1
-module	INTERNAL		IBM1132//		IBM1132		1
-
-#	from			to			module		cost
-alias	IBM-1133//		IBM1133//
-alias	CP1133//		IBM1133//
-alias	CSIBM1133//		IBM1133//
-module	IBM1133//		INTERNAL		IBM1133		1
-module	INTERNAL		IBM1133//		IBM1133		1
-
-#	from			to			module		cost
-alias	IBM-1162//		IBM1162//
-alias	CP1162//		IBM1162//
-alias	CSIBM11621162//		IBM1162//
-module	IBM1162//		INTERNAL		IBM1162		1
-module	INTERNAL		IBM1162//		IBM1162		1
-
-#	from			to			module		cost
-alias	IBM-1163//		IBM1163//
-alias	CP1163//		IBM1163//
-alias	CSIBM1163//		IBM1163//
-module	IBM1163//		INTERNAL		IBM1163		1
-module	INTERNAL		IBM1163//		IBM1163		1
-
-#	from			to			module		cost
-alias	IBM-1164//		IBM1164//
-alias	CP1164//		IBM1164//
-alias	CSIBM1164//		IBM1164//
-module	IBM1164//		INTERNAL		IBM1164		1
-module	INTERNAL		IBM1164//		IBM1164		1
-
-#	from			to			module		cost
-alias	EUCKR//			EUC-KR//
-alias	CSEUCKR//		EUC-KR//
-alias	OSF0004000a//		EUC-KR//
-module	EUC-KR//		INTERNAL		EUC-KR		1
-module	INTERNAL		EUC-KR//		EUC-KR		1
-
-#	from			to			module		cost
-alias	MSCP949//		UHC//
-alias	CP949//			UHC//
-alias	OSF100203B5//		UHC//
-module	UHC//			INTERNAL		UHC		1
-module	INTERNAL		UHC//			UHC		1
-
-#	from			to			module		cost
-alias	MSCP1361//		JOHAB//
-alias	CP1361//		JOHAB//
-module	JOHAB//			INTERNAL		JOHAB		1
-module	INTERNAL		JOHAB//			JOHAB		1
-
-#	from			to			module		cost
-alias	BIG-FIVE//		BIG5//
-alias	BIGFIVE//		BIG5//
-alias	BIG-5//			BIG5//
-alias	CN-BIG5//		BIG5//
-alias	CP950//			BIG5//
-module	BIG5//			INTERNAL		BIG5		1
-module	INTERNAL		BIG5//			BIG5		1
-
-#	from			to			module		cost
-alias	BIG5-HKSCS//		BIG5HKSCS//
-module	BIG5HKSCS//		INTERNAL		BIG5HKSCS	1
-module	INTERNAL		BIG5HKSCS//		BIG5HKSCS	1
-
-#	from			to			module		cost
-alias	EUCJP//			EUC-JP//
-alias	CSEUCPKDFMTJAPANESE//	EUC-JP//
-alias	OSF00030010//		EUC-JP//
-alias	UJIS//			EUC-JP//
-module	EUC-JP//		INTERNAL		EUC-JP		1
-module	INTERNAL		EUC-JP//		EUC-JP		1
-
-#	from			to			module		cost
-alias	EUCCN//			EUC-CN//
-alias	GB2312//		EUC-CN//
-alias	csGB2312//		EUC-CN//
-alias	CN-GB//			EUC-CN//
-module	EUC-CN//		INTERNAL		EUC-CN		1
-module	INTERNAL		EUC-CN//		EUC-CN		1
-
-#	from			to			module		cost
-module	EUC-CN//		BIG5//			GBBIG5		1
-module	BIG5//			EUC-CN//		GBBIG5		1
-
-#	from			to			module		cost
-alias	GB13000//		GBK//
-alias	CP936//			GBK//
-module	GBK//			INTERNAL		GBK		1
-module	INTERNAL		GBK//			GBK		1
-
-#	from			to			module		cost
-module	GBK//			EUC-CN//		GBGBK		1
-module	EUC-CN//		GBK//			GBGBK		1
-
-#	from			to			module		cost
-alias	EUCTW//			EUC-TW//
-alias	OSF0005000a//		EUC-TW//
-module	EUC-TW//		INTERNAL		EUC-TW		1
-module	INTERNAL		EUC-TW//		EUC-TW		1
-
-#	from			to			module		cost
-alias	MS-EE//			CP1250//
-alias	WINDOWS-1250//		CP1250//
-module	CP1250//		INTERNAL		CP1250		1
-module	INTERNAL		CP1250//		CP1250		1
-
-#	from			to			module		cost
-alias	MS-CYRL//		CP1251//
-alias	WINDOWS-1251//		CP1251//
-module	CP1251//		INTERNAL		CP1251		1
-module	INTERNAL		CP1251//		CP1251		1
-
-#	from			to			module		cost
-alias	MS-ANSI//		CP1252//
-alias	WINDOWS-1252//		CP1252//
-module	CP1252//		INTERNAL		CP1252		1
-module	INTERNAL		CP1252//		CP1252		1
-
-#	from			to			module		cost
-alias	MS-GREEK//		CP1253//
-alias	WINDOWS-1253//		CP1253//
-module	CP1253//		INTERNAL		CP1253		1
-module	INTERNAL		CP1253//		CP1253		1
-
-#	from			to			module		cost
-alias	MS-TURK//		CP1254//
-alias	WINDOWS-1254//		CP1254//
-module	CP1254//		INTERNAL		CP1254		1
-module	INTERNAL		CP1254//		CP1254		1
-
-#	from			to			module		cost
-alias	MS-HEBR//		CP1255//
-alias	WINDOWS-1255//		CP1255//
-module	CP1255//		INTERNAL		CP1255		1
-module	INTERNAL		CP1255//		CP1255		1
-
-#	from			to			module		cost
-alias	MS-ARAB//		CP1256//
-alias	WINDOWS-1256//		CP1256//
-module	CP1256//		INTERNAL		CP1256		1
-module	INTERNAL		CP1256//		CP1256		1
-
-#	from			to			module		cost
-alias	WINBALTRIM//		CP1257//
-alias	WINDOWS-1257//		CP1257//
-module	CP1257//		INTERNAL		CP1257		1
-module	INTERNAL		CP1257//		CP1257		1
-
-#	from			to			module		cost
-alias	WINDOWS-1258//		CP1258//
-module	CP1258//		INTERNAL		CP1258		1
-module	INTERNAL		CP1258//		CP1258		1
-
-#	from			to			module		cost
-alias	874//			IBM874//
-alias	CP874//			IBM874//
-module	IBM874//		INTERNAL		IBM874		1
-module	INTERNAL		IBM874//		IBM874		1
-
-#	from			to			module		cost
-module	CP737//			INTERNAL		CP737		1
-module	INTERNAL		CP737//			CP737		1
-
-#	from			to			module		cost
-alias	IBM775//		CP775//
-alias	CSPC775BALTIC//		CP775//
-module	CP775//			INTERNAL		CP775		1
-module	INTERNAL		CP775//			CP775		1
-
-#	from			to			module		cost
-alias	CSISO2022JP//		ISO-2022-JP//
-alias	ISO2022JP//		ISO-2022-JP//
-module	ISO-2022-JP//		INTERNAL		ISO-2022-JP	1
-module	INTERNAL		ISO-2022-JP//		ISO-2022-JP	1
-
-#	from			to			module		cost
-alias	CSISO2022JP2//		ISO-2022-JP-2//
-alias	ISO2022JP2//		ISO-2022-JP-2//
-module	ISO-2022-JP-2//		INTERNAL		ISO-2022-JP	1
-module	INTERNAL		ISO-2022-JP-2//		ISO-2022-JP	1
-
-#	from			to			module		cost
-alias	CSISO2022KR//		ISO-2022-KR//
-alias	ISO2022KR//		ISO-2022-KR//
-module	ISO-2022-KR//		INTERNAL		ISO-2022-KR	1
-module	INTERNAL		ISO-2022-KR//		ISO-2022-KR	1
-
-#	from			to			module		cost
-alias	CSISO2022CN//		ISO-2022-CN//
-alias	ISO2022CN//		ISO-2022-CN//
-module	ISO-2022-CN//		INTERNAL		ISO-2022-CN	1
-module	INTERNAL		ISO-2022-CN//		ISO-2022-CN	1
-
-#	from			to			module		cost
-alias	ISO2022CNEXT//		ISO-2022-CN-EXT//
-module	ISO-2022-CN-EXT//	INTERNAL		ISO-2022-CN-EXT	1
-module	INTERNAL		ISO-2022-CN-EXT//	ISO-2022-CN-EXT	1
-
-#	from			to			module		cost
-alias	MAC//			MACINTOSH//
-alias	CSMACINTOSH//		MACINTOSH//
-module	MACINTOSH//		INTERNAL		MACINTOSH	1
-module	INTERNAL		MACINTOSH//		MACINTOSH	1
-
-#	from			to			module		cost
-alias	ISO-IR-143//		IEC_P27-1//
-alias	CSISO143IECP271//	IEC_P27-1//
-alias	IEC_P271//		IEC_P27-1//
-module	IEC_P27-1//		INTERNAL		IEC_P27-1	1
-module	INTERNAL		IEC_P27-1//		IEC_P27-1	1
-
-#	from			to			module		cost
-alias	ISO_9036//		ASMO_449//
-alias	ARABIC7//		ASMO_449//
-alias	ISO-IR-89//		ASMO_449//
-alias	CSISO89ASMO449//	ASMO_449//
-module	ASMO_449//		INTERNAL		ASMO_449	1
-module	INTERNAL		ASMO_449//		ASMO_449	1
-
-#	from			to			module		cost
-alias	ANSI_X3.110-1983//	ANSI_X3.110//
-alias	ISO-IR-99//		ANSI_X3.110//
-alias	CSA_T500-1983//		ANSI_X3.110//
-alias	CSA_T500//		ANSI_X3.110//
-alias	NAPLPS//		ANSI_X3.110//
-alias	CSISO99NAPLPS//		ANSI_X3.110//
-module	ANSI_X3.110//		INTERNAL		ANSI_X3.110	1
-module	INTERNAL		ANSI_X3.110//		ANSI_X3.110	1
-
-#	from			to			module		cost
-alias	ISO-IR-139//		CSN_369103//
-alias	CSISO139CSN369103//	CSN_369103//
-module	CSN_369103//		INTERNAL		CSN_369103	1
-module	INTERNAL		CSN_369103//		CSN_369103	1
-
-#	from			to			module		cost
-alias	CWI-2//			CWI//
-alias	CP-HU//			CWI//
-module	CWI//			INTERNAL		CWI		1
-module	INTERNAL		CWI//			CWI		1
-
-#	from			to			module		cost
-alias	DEC//			DEC-MCS//
-alias	CSDECMCS//		DEC-MCS//
-alias	DECMCS//		DEC-MCS//
-module	DEC-MCS//		INTERNAL		DEC-MCS		1
-module	INTERNAL		DEC-MCS//		DEC-MCS		1
-
-#	from			to			module		cost
-alias	ISO-IR-111//		ECMA-CYRILLIC//
-alias	CSISO111ECMACYRILLIC//	ECMA-CYRILLIC//
-alias	ECMACYRILLIC//		ECMA-CYRILLIC//
-module	ECMA-CYRILLIC//		INTERNAL		ECMA-CYRILLIC	1
-module	INTERNAL		ECMA-CYRILLIC//		ECMA-CYRILLIC	1
-
-#	from			to			module		cost
-alias	ST_SEV_358-88//		GOST_19768-74//
-alias	GOST_19768//		GOST_19768-74//
-alias	ISO-IR-153//		GOST_19768-74//
-alias	CSISO153GOST1976874//	GOST_19768-74//
-alias	GOST_1976874//		GOST_19768-74//
-module	GOST_19768-74//		INTERNAL		GOST_19768-74	1
-module	INTERNAL		GOST_19768-74//		GOST_19768-74	1
-
-#	from			to			module		cost
-alias	ISO-IR-150//		GREEK-CCITT//
-alias	CSISO150//		GREEK-CCITT//
-alias	CSISO150GREEKCCITT//	GREEK-CCITT//
-alias	GREEKCCITT//		GREEK-CCITT//
-module	GREEK-CCITT//		INTERNAL		GREEK-CCITT	1
-module	INTERNAL		GREEK-CCITT//		GREEK-CCITT	1
-
-#	from			to			module		cost
-alias	ISO-IR-88//		GREEK7//
-alias	CSISO88GREEK7//		GREEK7//
-module	GREEK7//		INTERNAL		GREEK7		1
-module	INTERNAL		GREEK7//		GREEK7		1
-
-#	from			to			module		cost
-alias	ISO-IR-18//		GREEK7-OLD//
-alias	CSISO18GREEK7OLD//	GREEK7-OLD//
-alias	GREEK7OLD//		GREEK7-OLD//
-module	GREEK7-OLD//		INTERNAL		GREEK7-OLD	1
-module	INTERNAL		GREEK7-OLD//		GREEK7-OLD	1
-
-#	from			to			module		cost
-alias	ISO-IR-49//		INIS//
-alias	CSISO49INIS//		INIS//
-module	INIS//			INTERNAL		INIS		1
-module	INTERNAL		INIS//			INIS		1
-
-#	from			to			module		cost
-alias	ISO-IR-50//		INIS-8//
-alias	CSISO50INIS8//		INIS-8//
-alias	INIS8//			INIS-8//
-module	INIS-8//		INTERNAL		INIS-8		1
-module	INTERNAL		INIS-8//		INIS-8		1
-
-#	from			to			module		cost
-alias	ISO-IR-51//		INIS-CYRILLIC//
-alias	CSISO51INISCYRILLIC//	INIS-CYRILLIC//
-alias	INISCYRILLIC//		INIS-CYRILLIC//
-module	INIS-CYRILLIC//		INTERNAL		INIS-CYRILLIC	1
-module	INTERNAL		INIS-CYRILLIC//		INIS-CYRILLIC	1
-
-#	from			to			module		cost
-alias	ISO-IR-98//		ISO_2033//
-alias	ISO_2033-1983//		ISO_2033//
-alias	E13B/			ISO_2033//
-alias	CSISO2033//		ISO_2033//
-module	ISO_2033//		INTERNAL		ISO_2033	1
-module	INTERNAL		ISO_2033//		ISO_2033	1
-
-#	from			to			module		cost
-alias	ISO-IR-37//		ISO_5427//
-alias	KOI-7//			ISO_5427//
-alias	CSISO5427CYRILLIC//	ISO_5427//
-module	ISO_5427//		INTERNAL		ISO_5427	1
-module	INTERNAL		ISO_5427//		ISO_5427	1
-
-#	from			to			module		cost
-alias	ISO-IR-54//		ISO_5427-EXT//
-alias	ISO_5427:1981//		ISO_5427-EXT//
-alias	CSISO5427CYRILLIC1981//	ISO_5427-EXT//
-alias	ISO_5427EXT//		ISO_5427-EXT//
-module	ISO_5427-EXT//		INTERNAL		ISO_5427-EXT	1
-module	INTERNAL		ISO_5427-EXT//		ISO_5427-EXT	1
-
-#	from			to			module		cost
-alias	ISO-IR-55//		ISO_5428//
-alias	ISO_5428:1980//		ISO_5428//
-alias	CSISO5428GREEK//	ISO_5428//
-module	ISO_5428//		INTERNAL		ISO_5428	1
-module	INTERNAL		ISO_5428//		ISO_5428	1
-
-#	from			to			module		cost
-alias	ISO-IR-155//		ISO_10367-BOX//
-alias	CSISO10367BOX//		ISO_10367-BOX//
-alias	ISO_10367BOX//		ISO_10367-BOX//
-module	ISO_10367-BOX//		INTERNAL		ISO_10367-BOX	1
-module	INTERNAL		ISO_10367-BOX//		ISO_10367-BOX	1
-
-#	from			to			module		cost
-alias	MACIS//			MAC-IS//
-module	MAC-IS//		INTERNAL		MAC-IS		1
-module	INTERNAL		MAC-IS//		MAC-IS		1
-
-#	from			to			module		cost
-alias	MACUK//			MAC-UK//
-alias	MACUKRAINIAN//		MAC-UK//
-alias	MAC-CYRILLIC//		MAC-UK//
-alias	MACCYRILLIC//		MAC-UK//
-module	MAC-UK//		INTERNAL		MAC-UK		1
-module	INTERNAL		MAC-UK//		MAC-UK		1
-
-#	from			to			module		cost
-alias	MS-MAC-CYRILLIC//	CP10007//
-alias	MSMACCYRILLIC//		CP10007//
-module	CP10007//		INTERNAL		CP10007		1
-module	INTERNAL		CP10007//		CP10007		1
-
-#	from			to			module		cost
-alias	ISO-IR-9-1//		NATS-DANO//
-alias	CSNATSDANO//		NATS-DANO//
-alias	NATSDANO//		NATS-DANO//
-module	NATS-DANO//		INTERNAL		NATS-DANO	1
-module	INTERNAL		NATS-DANO//		NATS-DANO	1
-
-#	from			to			module		cost
-alias	ISO-IR-8-1//		NATS-SEFI//
-alias	CSNATSSEFI//		NATS-SEFI//
-alias	NATSSEFI//		NATS-SEFI//
-module	NATS-SEFI//		INTERNAL		NATS-SEFI	1
-module	INTERNAL		NATS-SEFI//		NATS-SEFI	1
-
-#	from			to			module		cost
-alias	WS2//			WIN-SAMI-2//
-alias	WINSAMI2//		WIN-SAMI-2//
-module	WIN-SAMI-2//		INTERNAL		SAMI-WS2	1
-module	INTERNAL		WIN-SAMI-2//		SAMI-WS2	1
-
-#	from			to			module		cost
-module	ISO-IR-197//		INTERNAL		ISO-IR-197	1
-module	INTERNAL		ISO-IR-197//		ISO-IR-197	1
-
-#	from			to			module		cost
-alias	TIS620//		TIS-620//
-alias	TIS620-0//		TIS-620//
-alias	TIS620.2529-1//		TIS-620//
-alias	TIS620.2533-0//		TIS-620//
-alias	ISO-IR-166//		TIS-620//
-module	TIS-620//		INTERNAL		TIS-620		1
-module	INTERNAL		TIS-620//		TIS-620		1
-
-#	from			to			module		cost
-alias	KOI8U//			KOI8-U//
-module	KOI8-U//		INTERNAL		KOI8-U		1
-module	INTERNAL		KOI8-U//		KOI8-U		1
-
-#	from			to			module		cost
-alias	ISIRI3342//		ISIRI-3342//
-module	ISIRI-3342//		INTERNAL		ISIRI-3342	1
-module	INTERNAL		ISIRI-3342//		ISIRI-3342	1
-
-#	from			to			module		cost
-alias	UTF16//			UTF-16//
-module	UTF-16//		INTERNAL		UTF-16		1
-module	INTERNAL		UTF-16//		UTF-16		1
-
-#	from			to			module		cost
-alias	UTF16LE//		UTF-16LE//
-module	UTF-16LE//		INTERNAL		UTF-16		1
-module	INTERNAL		UTF-16LE//		UTF-16		1
-
-#	from			to			module		cost
-alias	UTF16BE//		UTF-16BE//
-module	UTF-16BE//		INTERNAL		UTF-16		1
-module	INTERNAL		UTF-16BE//		UTF-16		1
-
-#	from			to			module		cost
-alias	CSUNICODE//		UNICODE//
-module	UNICODE//		INTERNAL		UNICODE		1
-module	INTERNAL		UNICODE//		UNICODE		1
-
-#	from			to			module		cost
-alias	UTF32//			UTF-32//
-module	UTF-32//		INTERNAL		UTF-32		1
-module	INTERNAL		UTF-32//		UTF-32		1
-
-#	from			to			module		cost
-alias	UTF32LE//		UTF-32LE//
-module	UTF-32LE//		INTERNAL		UTF-32		1
-module	INTERNAL		UTF-32LE//		UTF-32		1
-
-#	from			to			module		cost
-alias	UTF32BE//		UTF-32BE//
-module	UTF-32BE//		INTERNAL		UTF-32		1
-module	INTERNAL		UTF-32BE//		UTF-32		1
-
-#	from			to			module		cost
-alias	UTF7//			UTF-7//
-module	UTF-7//			INTERNAL		UTF-7		1
-module	INTERNAL		UTF-7//			UTF-7		1
-
-#	from			to			module		cost
-module	GB18030//		INTERNAL		GB18030		1
-module	INTERNAL		GB18030//		GB18030		1
-
-#	from			to			module		cost
-module	VISCII//		INTERNAL		VISCII		1
-module	INTERNAL		VISCII//		VISCII		1
-
-#	from			to			module		cost
-module	KOI8-T//		INTERNAL		KOI8-T		1
-module	INTERNAL		KOI8-T//		KOI8-T		1
-
-#	from			to			module		cost
-module	GEORGIAN-PS//		INTERNAL		GEORGIAN-PS	1
-module	INTERNAL		GEORGIAN-PS//		GEORGIAN-PS	1
-
-#	from			to			module		cost
-module	GEORGIAN-ACADEMY//	INTERNAL		GEORGIAN-ACADEMY 1
-module	INTERNAL		GEORGIAN-ACADEMY//	GEORGIAN-ACADEMY 1
-
-#	from			to			module		cost
-module	ISO-IR-209//		INTERNAL		ISO-IR-209	1
-module	INTERNAL		ISO-IR-209//		ISO-IR-209	1
-
-#	from			to			module		cost
-module	MAC-SAMI//		INTERNAL		MAC-SAMI	1
-module	INTERNAL		MAC-SAMI//		MAC-SAMI	1
-
-#	from			to			module		cost
-module	ARMSCII-8//		INTERNAL		ARMSCII-8	1
-module	INTERNAL		ARMSCII-8//		ARMSCII-8	1
-
-#	from			to			module		cost
-alias	TCVN//			TCVN5712-1//
-alias	TCVN-5712//		TCVN5712-1//
-alias	TCVN5712-1:1993//	TCVN5712-1//
-module	TCVN5712-1//		INTERNAL		TCVN5712-1	1
-module	INTERNAL		TCVN5712-1//		TCVN5712-1	1
diff --git a/newlib/iconvdata/jis0201.c b/newlib/iconvdata/jis0201.c
deleted file mode 100644
index a4a23cb35..000000000
--- a/newlib/iconvdata/jis0201.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Mapping tables for JIS0201 handling.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdint.h>
-
-
-const uint32_t __jisx0201_to_ucs4[256] =
-{
-  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
-  0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
-  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
-  0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f,
-  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027,
-  0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
-  0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037,
-  0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f,
-  0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
-  0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
-  0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
-  0x0058, 0x0059, 0x005a, 0x005b, 0x00a5, 0x005d, 0x005e, 0x005f,
-  0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067,
-  0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f,
-  0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077,
-  0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x203e, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0xff61, 0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67,
-  0xff68, 0xff69, 0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f,
-  0xff70, 0xff71, 0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77,
-  0xff78, 0xff79, 0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f,
-  0xff80, 0xff81, 0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87,
-  0xff88, 0xff89, 0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f,
-  0xff90, 0xff91, 0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97,
-  0xff98, 0xff99, 0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
-};
diff --git a/newlib/iconvdata/jis0201.h b/newlib/iconvdata/jis0201.h
deleted file mode 100644
index 6fae3a288..000000000
--- a/newlib/iconvdata/jis0201.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Access functions for JISX0201 conversion.
-   Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _JIS0201_H
-#define _JIS0201_H	1
-
-/* Conversion table.  */
-extern const uint32_t __jisx0201_to_ucs4[];
-
-
-static inline uint32_t
-jisx0201_to_ucs4 (char ch)
-{
-  uint32_t val = __jisx0201_to_ucs4[(unsigned char) ch];
-
-  if (val == 0 && ch != '\0')
-    val = __UNKNOWN_10646_CHAR;
-
-  return val;
-}
-
-
-static inline size_t
-ucs4_to_jisx0201 (uint32_t wch, char *s)
-{
-  char ch;
-
-  if (wch == 0xa5)
-    ch = '\x5c';
-  else if (wch == 0x203e)
-    ch = '\x7e';
-  else if (wch < 0x7e && wch != 0x5c)
-    ch = wch;
-  else if (wch >= 0xff61 && wch <= 0xff9f)
-    ch = wch - 0xfec0;
-  else
-    return __UNKNOWN_10646_CHAR;
-
-  s[0] = ch;
-  return 1;
-}
-
-#endif /* jis0201.h */
diff --git a/newlib/iconvdata/jis0208.c b/newlib/iconvdata/jis0208.c
deleted file mode 100644
index 1f16ad2f7..000000000
--- a/newlib/iconvdata/jis0208.c
+++ /dev/null
@@ -1,5012 +0,0 @@
-/* Mapping tables for JIS0208 handling.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdint.h>
-
-#include "jis0208.h"
-
-
-/* We use one big table for the mapping.  We know that the first byte
-   is in range 0x21 to 0xea.  The second byte never is in the ranges
-   0x00 to 0x20 and 0x7f to 0xff.  Compacting the table by excluding
-   these ranges we get a table with only this gaps:
-
-   at	0x222e	0x2241	0x2250	0x226a	0x2279	0x2321	0x2339	0x235a
-   len	12	9	12	8	5	15	8	7
-
-   at	0x237a	0x2473	0x2576	0x2638	0x2658	0x2741	0x2771	0x2840
-   len	4	11	8	9	38	16	13	62
-
-   at	0x4f53
-   len	43
-
-   It's not worth trying to use these gaps.  The table can be generated
-   using
-
-   egrep '^0x' < .../eastasia/jis/jis0208.txt |
-   perl tab.pl
-
-   with tab.pl containing:
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=0;
-   while (<>) {
-     local($sjis, $jis, $ucs4, %rest) = split;
-     local($u)=hex($ucs4);
-     local($s)=hex($jis);
-     printf ("\n ") if ($n % 4 eq 0);
-     ++$n;
-     printf (" [0x%04x] = 0x%04x,",
-	     int(($s - 0x2121) / 256) * 94 + (($s - 0x2121) & 0xff), $u);
-   }
-   printf ("\n");
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const uint16_t __jis0208_to_ucs[0x1e80] =
-{
-  [0x0000] = 0x3000, [0x0001] = 0x3001, [0x0002] = 0x3002, [0x0003] = 0xff0c,
-  [0x0004] = 0xff0e, [0x0005] = 0x30fb, [0x0006] = 0xff1a, [0x0007] = 0xff1b,
-  [0x0008] = 0xff1f, [0x0009] = 0xff01, [0x000a] = 0x309b, [0x000b] = 0x309c,
-  [0x000c] = 0x00b4, [0x000d] = 0xff40, [0x000e] = 0x00a8, [0x000f] = 0xff3e,
-  [0x0010] = 0xffe3, [0x0011] = 0xff3f, [0x0012] = 0x30fd, [0x0013] = 0x30fe,
-  [0x0014] = 0x309d, [0x0015] = 0x309e, [0x0016] = 0x3003, [0x0017] = 0x4edd,
-  [0x0018] = 0x3005, [0x0019] = 0x3006, [0x001a] = 0x3007, [0x001b] = 0x30fc,
-  [0x001c] = 0x2015, [0x001d] = 0x2010, [0x001e] = 0xff0f, [0x001f] = 0xff3c,
-  [0x0020] = 0x301c, [0x0021] = 0x2016, [0x0022] = 0xff5c, [0x0023] = 0x2026,
-  [0x0024] = 0x2025, [0x0025] = 0x2018, [0x0026] = 0x2019, [0x0027] = 0x201c,
-  [0x0028] = 0x201d, [0x0029] = 0xff08, [0x002a] = 0xff09, [0x002b] = 0x3014,
-  [0x002c] = 0x3015, [0x002d] = 0xff3b, [0x002e] = 0xff3d, [0x002f] = 0xff5b,
-  [0x0030] = 0xff5d, [0x0031] = 0x3008, [0x0032] = 0x3009, [0x0033] = 0x300a,
-  [0x0034] = 0x300b, [0x0035] = 0x300c, [0x0036] = 0x300d, [0x0037] = 0x300e,
-  [0x0038] = 0x300f, [0x0039] = 0x3010, [0x003a] = 0x3011, [0x003b] = 0xff0b,
-  [0x003c] = 0x2212, [0x003d] = 0x00b1, [0x003e] = 0x00d7, [0x003f] = 0x00f7,
-  [0x0040] = 0xff1d, [0x0041] = 0x2260, [0x0042] = 0xff1c, [0x0043] = 0xff1e,
-  [0x0044] = 0x2266, [0x0045] = 0x2267, [0x0046] = 0x221e, [0x0047] = 0x2234,
-  [0x0048] = 0x2642, [0x0049] = 0x2640, [0x004a] = 0x00b0, [0x004b] = 0x2032,
-  [0x004c] = 0x2033, [0x004d] = 0x2103, [0x004e] = 0xffe5, [0x004f] = 0xff04,
-  [0x0050] = 0x00a2, [0x0051] = 0x00a3, [0x0052] = 0xff05, [0x0053] = 0xff03,
-  [0x0054] = 0xff06, [0x0055] = 0xff0a, [0x0056] = 0xff20, [0x0057] = 0x00a7,
-  [0x0058] = 0x2606, [0x0059] = 0x2605, [0x005a] = 0x25cb, [0x005b] = 0x25cf,
-  [0x005c] = 0x25ce, [0x005d] = 0x25c7, [0x005e] = 0x25c6, [0x005f] = 0x25a1,
-  [0x0060] = 0x25a0, [0x0061] = 0x25b3, [0x0062] = 0x25b2, [0x0063] = 0x25bd,
-  [0x0064] = 0x25bc, [0x0065] = 0x203b, [0x0066] = 0x3012, [0x0067] = 0x2192,
-  [0x0068] = 0x2190, [0x0069] = 0x2191, [0x006a] = 0x2193, [0x006b] = 0x3013,
-  [0x0077] = 0x2208, [0x0078] = 0x220b, [0x0079] = 0x2286, [0x007a] = 0x2287,
-  [0x007b] = 0x2282, [0x007c] = 0x2283, [0x007d] = 0x222a, [0x007e] = 0x2229,
-  [0x0087] = 0x2227, [0x0088] = 0x2228, [0x0089] = 0x00ac, [0x008a] = 0x21d2,
-  [0x008b] = 0x21d4, [0x008c] = 0x2200, [0x008d] = 0x2203, [0x0099] = 0x2220,
-  [0x009a] = 0x22a5, [0x009b] = 0x2312, [0x009c] = 0x2202, [0x009d] = 0x2207,
-  [0x009e] = 0x2261, [0x009f] = 0x2252, [0x00a0] = 0x226a, [0x00a1] = 0x226b,
-  [0x00a2] = 0x221a, [0x00a3] = 0x223d, [0x00a4] = 0x221d, [0x00a5] = 0x2235,
-  [0x00a6] = 0x222b, [0x00a7] = 0x222c, [0x00af] = 0x212b, [0x00b0] = 0x2030,
-  [0x00b1] = 0x266f, [0x00b2] = 0x266d, [0x00b3] = 0x266a, [0x00b4] = 0x2020,
-  [0x00b5] = 0x2021, [0x00b6] = 0x00b6, [0x00bb] = 0x25ef, [0x00cb] = 0xff10,
-  [0x00cc] = 0xff11, [0x00cd] = 0xff12, [0x00ce] = 0xff13, [0x00cf] = 0xff14,
-  [0x00d0] = 0xff15, [0x00d1] = 0xff16, [0x00d2] = 0xff17, [0x00d3] = 0xff18,
-  [0x00d4] = 0xff19, [0x00dc] = 0xff21, [0x00dd] = 0xff22, [0x00de] = 0xff23,
-  [0x00df] = 0xff24, [0x00e0] = 0xff25, [0x00e1] = 0xff26, [0x00e2] = 0xff27,
-  [0x00e3] = 0xff28, [0x00e4] = 0xff29, [0x00e5] = 0xff2a, [0x00e6] = 0xff2b,
-  [0x00e7] = 0xff2c, [0x00e8] = 0xff2d, [0x00e9] = 0xff2e, [0x00ea] = 0xff2f,
-  [0x00eb] = 0xff30, [0x00ec] = 0xff31, [0x00ed] = 0xff32, [0x00ee] = 0xff33,
-  [0x00ef] = 0xff34, [0x00f0] = 0xff35, [0x00f1] = 0xff36, [0x00f2] = 0xff37,
-  [0x00f3] = 0xff38, [0x00f4] = 0xff39, [0x00f5] = 0xff3a, [0x00fc] = 0xff41,
-  [0x00fd] = 0xff42, [0x00fe] = 0xff43, [0x00ff] = 0xff44, [0x0100] = 0xff45,
-  [0x0101] = 0xff46, [0x0102] = 0xff47, [0x0103] = 0xff48, [0x0104] = 0xff49,
-  [0x0105] = 0xff4a, [0x0106] = 0xff4b, [0x0107] = 0xff4c, [0x0108] = 0xff4d,
-  [0x0109] = 0xff4e, [0x010a] = 0xff4f, [0x010b] = 0xff50, [0x010c] = 0xff51,
-  [0x010d] = 0xff52, [0x010e] = 0xff53, [0x010f] = 0xff54, [0x0110] = 0xff55,
-  [0x0111] = 0xff56, [0x0112] = 0xff57, [0x0113] = 0xff58, [0x0114] = 0xff59,
-  [0x0115] = 0xff5a, [0x011a] = 0x3041, [0x011b] = 0x3042, [0x011c] = 0x3043,
-  [0x011d] = 0x3044, [0x011e] = 0x3045, [0x011f] = 0x3046, [0x0120] = 0x3047,
-  [0x0121] = 0x3048, [0x0122] = 0x3049, [0x0123] = 0x304a, [0x0124] = 0x304b,
-  [0x0125] = 0x304c, [0x0126] = 0x304d, [0x0127] = 0x304e, [0x0128] = 0x304f,
-  [0x0129] = 0x3050, [0x012a] = 0x3051, [0x012b] = 0x3052, [0x012c] = 0x3053,
-  [0x012d] = 0x3054, [0x012e] = 0x3055, [0x012f] = 0x3056, [0x0130] = 0x3057,
-  [0x0131] = 0x3058, [0x0132] = 0x3059, [0x0133] = 0x305a, [0x0134] = 0x305b,
-  [0x0135] = 0x305c, [0x0136] = 0x305d, [0x0137] = 0x305e, [0x0138] = 0x305f,
-  [0x0139] = 0x3060, [0x013a] = 0x3061, [0x013b] = 0x3062, [0x013c] = 0x3063,
-  [0x013d] = 0x3064, [0x013e] = 0x3065, [0x013f] = 0x3066, [0x0140] = 0x3067,
-  [0x0141] = 0x3068, [0x0142] = 0x3069, [0x0143] = 0x306a, [0x0144] = 0x306b,
-  [0x0145] = 0x306c, [0x0146] = 0x306d, [0x0147] = 0x306e, [0x0148] = 0x306f,
-  [0x0149] = 0x3070, [0x014a] = 0x3071, [0x014b] = 0x3072, [0x014c] = 0x3073,
-  [0x014d] = 0x3074, [0x014e] = 0x3075, [0x014f] = 0x3076, [0x0150] = 0x3077,
-  [0x0151] = 0x3078, [0x0152] = 0x3079, [0x0153] = 0x307a, [0x0154] = 0x307b,
-  [0x0155] = 0x307c, [0x0156] = 0x307d, [0x0157] = 0x307e, [0x0158] = 0x307f,
-  [0x0159] = 0x3080, [0x015a] = 0x3081, [0x015b] = 0x3082, [0x015c] = 0x3083,
-  [0x015d] = 0x3084, [0x015e] = 0x3085, [0x015f] = 0x3086, [0x0160] = 0x3087,
-  [0x0161] = 0x3088, [0x0162] = 0x3089, [0x0163] = 0x308a, [0x0164] = 0x308b,
-  [0x0165] = 0x308c, [0x0166] = 0x308d, [0x0167] = 0x308e, [0x0168] = 0x308f,
-  [0x0169] = 0x3090, [0x016a] = 0x3091, [0x016b] = 0x3092, [0x016c] = 0x3093,
-  [0x0178] = 0x30a1, [0x0179] = 0x30a2, [0x017a] = 0x30a3, [0x017b] = 0x30a4,
-  [0x017c] = 0x30a5, [0x017d] = 0x30a6, [0x017e] = 0x30a7, [0x017f] = 0x30a8,
-  [0x0180] = 0x30a9, [0x0181] = 0x30aa, [0x0182] = 0x30ab, [0x0183] = 0x30ac,
-  [0x0184] = 0x30ad, [0x0185] = 0x30ae, [0x0186] = 0x30af, [0x0187] = 0x30b0,
-  [0x0188] = 0x30b1, [0x0189] = 0x30b2, [0x018a] = 0x30b3, [0x018b] = 0x30b4,
-  [0x018c] = 0x30b5, [0x018d] = 0x30b6, [0x018e] = 0x30b7, [0x018f] = 0x30b8,
-  [0x0190] = 0x30b9, [0x0191] = 0x30ba, [0x0192] = 0x30bb, [0x0193] = 0x30bc,
-  [0x0194] = 0x30bd, [0x0195] = 0x30be, [0x0196] = 0x30bf, [0x0197] = 0x30c0,
-  [0x0198] = 0x30c1, [0x0199] = 0x30c2, [0x019a] = 0x30c3, [0x019b] = 0x30c4,
-  [0x019c] = 0x30c5, [0x019d] = 0x30c6, [0x019e] = 0x30c7, [0x019f] = 0x30c8,
-  [0x01a0] = 0x30c9, [0x01a1] = 0x30ca, [0x01a2] = 0x30cb, [0x01a3] = 0x30cc,
-  [0x01a4] = 0x30cd, [0x01a5] = 0x30ce, [0x01a6] = 0x30cf, [0x01a7] = 0x30d0,
-  [0x01a8] = 0x30d1, [0x01a9] = 0x30d2, [0x01aa] = 0x30d3, [0x01ab] = 0x30d4,
-  [0x01ac] = 0x30d5, [0x01ad] = 0x30d6, [0x01ae] = 0x30d7, [0x01af] = 0x30d8,
-  [0x01b0] = 0x30d9, [0x01b1] = 0x30da, [0x01b2] = 0x30db, [0x01b3] = 0x30dc,
-  [0x01b4] = 0x30dd, [0x01b5] = 0x30de, [0x01b6] = 0x30df, [0x01b7] = 0x30e0,
-  [0x01b8] = 0x30e1, [0x01b9] = 0x30e2, [0x01ba] = 0x30e3, [0x01bb] = 0x30e4,
-  [0x01bc] = 0x30e5, [0x01bd] = 0x30e6, [0x01be] = 0x30e7, [0x01bf] = 0x30e8,
-  [0x01c0] = 0x30e9, [0x01c1] = 0x30ea, [0x01c2] = 0x30eb, [0x01c3] = 0x30ec,
-  [0x01c4] = 0x30ed, [0x01c5] = 0x30ee, [0x01c6] = 0x30ef, [0x01c7] = 0x30f0,
-  [0x01c8] = 0x30f1, [0x01c9] = 0x30f2, [0x01ca] = 0x30f3, [0x01cb] = 0x30f4,
-  [0x01cc] = 0x30f5, [0x01cd] = 0x30f6, [0x01d6] = 0x0391, [0x01d7] = 0x0392,
-  [0x01d8] = 0x0393, [0x01d9] = 0x0394, [0x01da] = 0x0395, [0x01db] = 0x0396,
-  [0x01dc] = 0x0397, [0x01dd] = 0x0398, [0x01de] = 0x0399, [0x01df] = 0x039a,
-  [0x01e0] = 0x039b, [0x01e1] = 0x039c, [0x01e2] = 0x039d, [0x01e3] = 0x039e,
-  [0x01e4] = 0x039f, [0x01e5] = 0x03a0, [0x01e6] = 0x03a1, [0x01e7] = 0x03a3,
-  [0x01e8] = 0x03a4, [0x01e9] = 0x03a5, [0x01ea] = 0x03a6, [0x01eb] = 0x03a7,
-  [0x01ec] = 0x03a8, [0x01ed] = 0x03a9, [0x01f6] = 0x03b1, [0x01f7] = 0x03b2,
-  [0x01f8] = 0x03b3, [0x01f9] = 0x03b4, [0x01fa] = 0x03b5, [0x01fb] = 0x03b6,
-  [0x01fc] = 0x03b7, [0x01fd] = 0x03b8, [0x01fe] = 0x03b9, [0x01ff] = 0x03ba,
-  [0x0200] = 0x03bb, [0x0201] = 0x03bc, [0x0202] = 0x03bd, [0x0203] = 0x03be,
-  [0x0204] = 0x03bf, [0x0205] = 0x03c0, [0x0206] = 0x03c1, [0x0207] = 0x03c3,
-  [0x0208] = 0x03c4, [0x0209] = 0x03c5, [0x020a] = 0x03c6, [0x020b] = 0x03c7,
-  [0x020c] = 0x03c8, [0x020d] = 0x03c9, [0x0234] = 0x0410, [0x0235] = 0x0411,
-  [0x0236] = 0x0412, [0x0237] = 0x0413, [0x0238] = 0x0414, [0x0239] = 0x0415,
-  [0x023a] = 0x0401, [0x023b] = 0x0416, [0x023c] = 0x0417, [0x023d] = 0x0418,
-  [0x023e] = 0x0419, [0x023f] = 0x041a, [0x0240] = 0x041b, [0x0241] = 0x041c,
-  [0x0242] = 0x041d, [0x0243] = 0x041e, [0x0244] = 0x041f, [0x0245] = 0x0420,
-  [0x0246] = 0x0421, [0x0247] = 0x0422, [0x0248] = 0x0423, [0x0249] = 0x0424,
-  [0x024a] = 0x0425, [0x024b] = 0x0426, [0x024c] = 0x0427, [0x024d] = 0x0428,
-  [0x024e] = 0x0429, [0x024f] = 0x042a, [0x0250] = 0x042b, [0x0251] = 0x042c,
-  [0x0252] = 0x042d, [0x0253] = 0x042e, [0x0254] = 0x042f, [0x0264] = 0x0430,
-  [0x0265] = 0x0431, [0x0266] = 0x0432, [0x0267] = 0x0433, [0x0268] = 0x0434,
-  [0x0269] = 0x0435, [0x026a] = 0x0451, [0x026b] = 0x0436, [0x026c] = 0x0437,
-  [0x026d] = 0x0438, [0x026e] = 0x0439, [0x026f] = 0x043a, [0x0270] = 0x043b,
-  [0x0271] = 0x043c, [0x0272] = 0x043d, [0x0273] = 0x043e, [0x0274] = 0x043f,
-  [0x0275] = 0x0440, [0x0276] = 0x0441, [0x0277] = 0x0442, [0x0278] = 0x0443,
-  [0x0279] = 0x0444, [0x027a] = 0x0445, [0x027b] = 0x0446, [0x027c] = 0x0447,
-  [0x027d] = 0x0448, [0x027e] = 0x0449, [0x027f] = 0x044a, [0x0280] = 0x044b,
-  [0x0281] = 0x044c, [0x0282] = 0x044d, [0x0283] = 0x044e, [0x0284] = 0x044f,
-  [0x0292] = 0x2500, [0x0293] = 0x2502, [0x0294] = 0x250c, [0x0295] = 0x2510,
-  [0x0296] = 0x2518, [0x0297] = 0x2514, [0x0298] = 0x251c, [0x0299] = 0x252c,
-  [0x029a] = 0x2524, [0x029b] = 0x2534, [0x029c] = 0x253c, [0x029d] = 0x2501,
-  [0x029e] = 0x2503, [0x029f] = 0x250f, [0x02a0] = 0x2513, [0x02a1] = 0x251b,
-  [0x02a2] = 0x2517, [0x02a3] = 0x2523, [0x02a4] = 0x2533, [0x02a5] = 0x252b,
-  [0x02a6] = 0x253b, [0x02a7] = 0x254b, [0x02a8] = 0x2520, [0x02a9] = 0x252f,
-  [0x02aa] = 0x2528, [0x02ab] = 0x2537, [0x02ac] = 0x253f, [0x02ad] = 0x251d,
-  [0x02ae] = 0x2530, [0x02af] = 0x2525, [0x02b0] = 0x2538, [0x02b1] = 0x2542,
-  [0x0582] = 0x4e9c, [0x0583] = 0x5516, [0x0584] = 0x5a03, [0x0585] = 0x963f,
-  [0x0586] = 0x54c0, [0x0587] = 0x611b, [0x0588] = 0x6328, [0x0589] = 0x59f6,
-  [0x058a] = 0x9022, [0x058b] = 0x8475, [0x058c] = 0x831c, [0x058d] = 0x7a50,
-  [0x058e] = 0x60aa, [0x058f] = 0x63e1, [0x0590] = 0x6e25, [0x0591] = 0x65ed,
-  [0x0592] = 0x8466, [0x0593] = 0x82a6, [0x0594] = 0x9bf5, [0x0595] = 0x6893,
-  [0x0596] = 0x5727, [0x0597] = 0x65a1, [0x0598] = 0x6271, [0x0599] = 0x5b9b,
-  [0x059a] = 0x59d0, [0x059b] = 0x867b, [0x059c] = 0x98f4, [0x059d] = 0x7d62,
-  [0x059e] = 0x7dbe, [0x059f] = 0x9b8e, [0x05a0] = 0x6216, [0x05a1] = 0x7c9f,
-  [0x05a2] = 0x88b7, [0x05a3] = 0x5b89, [0x05a4] = 0x5eb5, [0x05a5] = 0x6309,
-  [0x05a6] = 0x6697, [0x05a7] = 0x6848, [0x05a8] = 0x95c7, [0x05a9] = 0x978d,
-  [0x05aa] = 0x674f, [0x05ab] = 0x4ee5, [0x05ac] = 0x4f0a, [0x05ad] = 0x4f4d,
-  [0x05ae] = 0x4f9d, [0x05af] = 0x5049, [0x05b0] = 0x56f2, [0x05b1] = 0x5937,
-  [0x05b2] = 0x59d4, [0x05b3] = 0x5a01, [0x05b4] = 0x5c09, [0x05b5] = 0x60df,
-  [0x05b6] = 0x610f, [0x05b7] = 0x6170, [0x05b8] = 0x6613, [0x05b9] = 0x6905,
-  [0x05ba] = 0x70ba, [0x05bb] = 0x754f, [0x05bc] = 0x7570, [0x05bd] = 0x79fb,
-  [0x05be] = 0x7dad, [0x05bf] = 0x7def, [0x05c0] = 0x80c3, [0x05c1] = 0x840e,
-  [0x05c2] = 0x8863, [0x05c3] = 0x8b02, [0x05c4] = 0x9055, [0x05c5] = 0x907a,
-  [0x05c6] = 0x533b, [0x05c7] = 0x4e95, [0x05c8] = 0x4ea5, [0x05c9] = 0x57df,
-  [0x05ca] = 0x80b2, [0x05cb] = 0x90c1, [0x05cc] = 0x78ef, [0x05cd] = 0x4e00,
-  [0x05ce] = 0x58f1, [0x05cf] = 0x6ea2, [0x05d0] = 0x9038, [0x05d1] = 0x7a32,
-  [0x05d2] = 0x8328, [0x05d3] = 0x828b, [0x05d4] = 0x9c2f, [0x05d5] = 0x5141,
-  [0x05d6] = 0x5370, [0x05d7] = 0x54bd, [0x05d8] = 0x54e1, [0x05d9] = 0x56e0,
-  [0x05da] = 0x59fb, [0x05db] = 0x5f15, [0x05dc] = 0x98f2, [0x05dd] = 0x6deb,
-  [0x05de] = 0x80e4, [0x05df] = 0x852d, [0x05e0] = 0x9662, [0x05e1] = 0x9670,
-  [0x05e2] = 0x96a0, [0x05e3] = 0x97fb, [0x05e4] = 0x540b, [0x05e5] = 0x53f3,
-  [0x05e6] = 0x5b87, [0x05e7] = 0x70cf, [0x05e8] = 0x7fbd, [0x05e9] = 0x8fc2,
-  [0x05ea] = 0x96e8, [0x05eb] = 0x536f, [0x05ec] = 0x9d5c, [0x05ed] = 0x7aba,
-  [0x05ee] = 0x4e11, [0x05ef] = 0x7893, [0x05f0] = 0x81fc, [0x05f1] = 0x6e26,
-  [0x05f2] = 0x5618, [0x05f3] = 0x5504, [0x05f4] = 0x6b1d, [0x05f5] = 0x851a,
-  [0x05f6] = 0x9c3b, [0x05f7] = 0x59e5, [0x05f8] = 0x53a9, [0x05f9] = 0x6d66,
-  [0x05fa] = 0x74dc, [0x05fb] = 0x958f, [0x05fc] = 0x5642, [0x05fd] = 0x4e91,
-  [0x05fe] = 0x904b, [0x05ff] = 0x96f2, [0x0600] = 0x834f, [0x0601] = 0x990c,
-  [0x0602] = 0x53e1, [0x0603] = 0x55b6, [0x0604] = 0x5b30, [0x0605] = 0x5f71,
-  [0x0606] = 0x6620, [0x0607] = 0x66f3, [0x0608] = 0x6804, [0x0609] = 0x6c38,
-  [0x060a] = 0x6cf3, [0x060b] = 0x6d29, [0x060c] = 0x745b, [0x060d] = 0x76c8,
-  [0x060e] = 0x7a4e, [0x060f] = 0x9834, [0x0610] = 0x82f1, [0x0611] = 0x885b,
-  [0x0612] = 0x8a60, [0x0613] = 0x92ed, [0x0614] = 0x6db2, [0x0615] = 0x75ab,
-  [0x0616] = 0x76ca, [0x0617] = 0x99c5, [0x0618] = 0x60a6, [0x0619] = 0x8b01,
-  [0x061a] = 0x8d8a, [0x061b] = 0x95b2, [0x061c] = 0x698e, [0x061d] = 0x53ad,
-  [0x061e] = 0x5186, [0x061f] = 0x5712, [0x0620] = 0x5830, [0x0621] = 0x5944,
-  [0x0622] = 0x5bb4, [0x0623] = 0x5ef6, [0x0624] = 0x6028, [0x0625] = 0x63a9,
-  [0x0626] = 0x63f4, [0x0627] = 0x6cbf, [0x0628] = 0x6f14, [0x0629] = 0x708e,
-  [0x062a] = 0x7114, [0x062b] = 0x7159, [0x062c] = 0x71d5, [0x062d] = 0x733f,
-  [0x062e] = 0x7e01, [0x062f] = 0x8276, [0x0630] = 0x82d1, [0x0631] = 0x8597,
-  [0x0632] = 0x9060, [0x0633] = 0x925b, [0x0634] = 0x9d1b, [0x0635] = 0x5869,
-  [0x0636] = 0x65bc, [0x0637] = 0x6c5a, [0x0638] = 0x7525, [0x0639] = 0x51f9,
-  [0x063a] = 0x592e, [0x063b] = 0x5965, [0x063c] = 0x5f80, [0x063d] = 0x5fdc,
-  [0x063e] = 0x62bc, [0x063f] = 0x65fa, [0x0640] = 0x6a2a, [0x0641] = 0x6b27,
-  [0x0642] = 0x6bb4, [0x0643] = 0x738b, [0x0644] = 0x7fc1, [0x0645] = 0x8956,
-  [0x0646] = 0x9d2c, [0x0647] = 0x9d0e, [0x0648] = 0x9ec4, [0x0649] = 0x5ca1,
-  [0x064a] = 0x6c96, [0x064b] = 0x837b, [0x064c] = 0x5104, [0x064d] = 0x5c4b,
-  [0x064e] = 0x61b6, [0x064f] = 0x81c6, [0x0650] = 0x6876, [0x0651] = 0x7261,
-  [0x0652] = 0x4e59, [0x0653] = 0x4ffa, [0x0654] = 0x5378, [0x0655] = 0x6069,
-  [0x0656] = 0x6e29, [0x0657] = 0x7a4f, [0x0658] = 0x97f3, [0x0659] = 0x4e0b,
-  [0x065a] = 0x5316, [0x065b] = 0x4eee, [0x065c] = 0x4f55, [0x065d] = 0x4f3d,
-  [0x065e] = 0x4fa1, [0x065f] = 0x4f73, [0x0660] = 0x52a0, [0x0661] = 0x53ef,
-  [0x0662] = 0x5609, [0x0663] = 0x590f, [0x0664] = 0x5ac1, [0x0665] = 0x5bb6,
-  [0x0666] = 0x5be1, [0x0667] = 0x79d1, [0x0668] = 0x6687, [0x0669] = 0x679c,
-  [0x066a] = 0x67b6, [0x066b] = 0x6b4c, [0x066c] = 0x6cb3, [0x066d] = 0x706b,
-  [0x066e] = 0x73c2, [0x066f] = 0x798d, [0x0670] = 0x79be, [0x0671] = 0x7a3c,
-  [0x0672] = 0x7b87, [0x0673] = 0x82b1, [0x0674] = 0x82db, [0x0675] = 0x8304,
-  [0x0676] = 0x8377, [0x0677] = 0x83ef, [0x0678] = 0x83d3, [0x0679] = 0x8766,
-  [0x067a] = 0x8ab2, [0x067b] = 0x5629, [0x067c] = 0x8ca8, [0x067d] = 0x8fe6,
-  [0x067e] = 0x904e, [0x067f] = 0x971e, [0x0680] = 0x868a, [0x0681] = 0x4fc4,
-  [0x0682] = 0x5ce8, [0x0683] = 0x6211, [0x0684] = 0x7259, [0x0685] = 0x753b,
-  [0x0686] = 0x81e5, [0x0687] = 0x82bd, [0x0688] = 0x86fe, [0x0689] = 0x8cc0,
-  [0x068a] = 0x96c5, [0x068b] = 0x9913, [0x068c] = 0x99d5, [0x068d] = 0x4ecb,
-  [0x068e] = 0x4f1a, [0x068f] = 0x89e3, [0x0690] = 0x56de, [0x0691] = 0x584a,
-  [0x0692] = 0x58ca, [0x0693] = 0x5efb, [0x0694] = 0x5feb, [0x0695] = 0x602a,
-  [0x0696] = 0x6094, [0x0697] = 0x6062, [0x0698] = 0x61d0, [0x0699] = 0x6212,
-  [0x069a] = 0x62d0, [0x069b] = 0x6539, [0x069c] = 0x9b41, [0x069d] = 0x6666,
-  [0x069e] = 0x68b0, [0x069f] = 0x6d77, [0x06a0] = 0x7070, [0x06a1] = 0x754c,
-  [0x06a2] = 0x7686, [0x06a3] = 0x7d75, [0x06a4] = 0x82a5, [0x06a5] = 0x87f9,
-  [0x06a6] = 0x958b, [0x06a7] = 0x968e, [0x06a8] = 0x8c9d, [0x06a9] = 0x51f1,
-  [0x06aa] = 0x52be, [0x06ab] = 0x5916, [0x06ac] = 0x54b3, [0x06ad] = 0x5bb3,
-  [0x06ae] = 0x5d16, [0x06af] = 0x6168, [0x06b0] = 0x6982, [0x06b1] = 0x6daf,
-  [0x06b2] = 0x788d, [0x06b3] = 0x84cb, [0x06b4] = 0x8857, [0x06b5] = 0x8a72,
-  [0x06b6] = 0x93a7, [0x06b7] = 0x9ab8, [0x06b8] = 0x6d6c, [0x06b9] = 0x99a8,
-  [0x06ba] = 0x86d9, [0x06bb] = 0x57a3, [0x06bc] = 0x67ff, [0x06bd] = 0x86ce,
-  [0x06be] = 0x920e, [0x06bf] = 0x5283, [0x06c0] = 0x5687, [0x06c1] = 0x5404,
-  [0x06c2] = 0x5ed3, [0x06c3] = 0x62e1, [0x06c4] = 0x64b9, [0x06c5] = 0x683c,
-  [0x06c6] = 0x6838, [0x06c7] = 0x6bbb, [0x06c8] = 0x7372, [0x06c9] = 0x78ba,
-  [0x06ca] = 0x7a6b, [0x06cb] = 0x899a, [0x06cc] = 0x89d2, [0x06cd] = 0x8d6b,
-  [0x06ce] = 0x8f03, [0x06cf] = 0x90ed, [0x06d0] = 0x95a3, [0x06d1] = 0x9694,
-  [0x06d2] = 0x9769, [0x06d3] = 0x5b66, [0x06d4] = 0x5cb3, [0x06d5] = 0x697d,
-  [0x06d6] = 0x984d, [0x06d7] = 0x984e, [0x06d8] = 0x639b, [0x06d9] = 0x7b20,
-  [0x06da] = 0x6a2b, [0x06db] = 0x6a7f, [0x06dc] = 0x68b6, [0x06dd] = 0x9c0d,
-  [0x06de] = 0x6f5f, [0x06df] = 0x5272, [0x06e0] = 0x559d, [0x06e1] = 0x6070,
-  [0x06e2] = 0x62ec, [0x06e3] = 0x6d3b, [0x06e4] = 0x6e07, [0x06e5] = 0x6ed1,
-  [0x06e6] = 0x845b, [0x06e7] = 0x8910, [0x06e8] = 0x8f44, [0x06e9] = 0x4e14,
-  [0x06ea] = 0x9c39, [0x06eb] = 0x53f6, [0x06ec] = 0x691b, [0x06ed] = 0x6a3a,
-  [0x06ee] = 0x9784, [0x06ef] = 0x682a, [0x06f0] = 0x515c, [0x06f1] = 0x7ac3,
-  [0x06f2] = 0x84b2, [0x06f3] = 0x91dc, [0x06f4] = 0x938c, [0x06f5] = 0x565b,
-  [0x06f6] = 0x9d28, [0x06f7] = 0x6822, [0x06f8] = 0x8305, [0x06f9] = 0x8431,
-  [0x06fa] = 0x7ca5, [0x06fb] = 0x5208, [0x06fc] = 0x82c5, [0x06fd] = 0x74e6,
-  [0x06fe] = 0x4e7e, [0x06ff] = 0x4f83, [0x0700] = 0x51a0, [0x0701] = 0x5bd2,
-  [0x0702] = 0x520a, [0x0703] = 0x52d8, [0x0704] = 0x52e7, [0x0705] = 0x5dfb,
-  [0x0706] = 0x559a, [0x0707] = 0x582a, [0x0708] = 0x59e6, [0x0709] = 0x5b8c,
-  [0x070a] = 0x5b98, [0x070b] = 0x5bdb, [0x070c] = 0x5e72, [0x070d] = 0x5e79,
-  [0x070e] = 0x60a3, [0x070f] = 0x611f, [0x0710] = 0x6163, [0x0711] = 0x61be,
-  [0x0712] = 0x63db, [0x0713] = 0x6562, [0x0714] = 0x67d1, [0x0715] = 0x6853,
-  [0x0716] = 0x68fa, [0x0717] = 0x6b3e, [0x0718] = 0x6b53, [0x0719] = 0x6c57,
-  [0x071a] = 0x6f22, [0x071b] = 0x6f97, [0x071c] = 0x6f45, [0x071d] = 0x74b0,
-  [0x071e] = 0x7518, [0x071f] = 0x76e3, [0x0720] = 0x770b, [0x0721] = 0x7aff,
-  [0x0722] = 0x7ba1, [0x0723] = 0x7c21, [0x0724] = 0x7de9, [0x0725] = 0x7f36,
-  [0x0726] = 0x7ff0, [0x0727] = 0x809d, [0x0728] = 0x8266, [0x0729] = 0x839e,
-  [0x072a] = 0x89b3, [0x072b] = 0x8acc, [0x072c] = 0x8cab, [0x072d] = 0x9084,
-  [0x072e] = 0x9451, [0x072f] = 0x9593, [0x0730] = 0x9591, [0x0731] = 0x95a2,
-  [0x0732] = 0x9665, [0x0733] = 0x97d3, [0x0734] = 0x9928, [0x0735] = 0x8218,
-  [0x0736] = 0x4e38, [0x0737] = 0x542b, [0x0738] = 0x5cb8, [0x0739] = 0x5dcc,
-  [0x073a] = 0x73a9, [0x073b] = 0x764c, [0x073c] = 0x773c, [0x073d] = 0x5ca9,
-  [0x073e] = 0x7feb, [0x073f] = 0x8d0b, [0x0740] = 0x96c1, [0x0741] = 0x9811,
-  [0x0742] = 0x9854, [0x0743] = 0x9858, [0x0744] = 0x4f01, [0x0745] = 0x4f0e,
-  [0x0746] = 0x5371, [0x0747] = 0x559c, [0x0748] = 0x5668, [0x0749] = 0x57fa,
-  [0x074a] = 0x5947, [0x074b] = 0x5b09, [0x074c] = 0x5bc4, [0x074d] = 0x5c90,
-  [0x074e] = 0x5e0c, [0x074f] = 0x5e7e, [0x0750] = 0x5fcc, [0x0751] = 0x63ee,
-  [0x0752] = 0x673a, [0x0753] = 0x65d7, [0x0754] = 0x65e2, [0x0755] = 0x671f,
-  [0x0756] = 0x68cb, [0x0757] = 0x68c4, [0x0758] = 0x6a5f, [0x0759] = 0x5e30,
-  [0x075a] = 0x6bc5, [0x075b] = 0x6c17, [0x075c] = 0x6c7d, [0x075d] = 0x757f,
-  [0x075e] = 0x7948, [0x075f] = 0x5b63, [0x0760] = 0x7a00, [0x0761] = 0x7d00,
-  [0x0762] = 0x5fbd, [0x0763] = 0x898f, [0x0764] = 0x8a18, [0x0765] = 0x8cb4,
-  [0x0766] = 0x8d77, [0x0767] = 0x8ecc, [0x0768] = 0x8f1d, [0x0769] = 0x98e2,
-  [0x076a] = 0x9a0e, [0x076b] = 0x9b3c, [0x076c] = 0x4e80, [0x076d] = 0x507d,
-  [0x076e] = 0x5100, [0x076f] = 0x5993, [0x0770] = 0x5b9c, [0x0771] = 0x622f,
-  [0x0772] = 0x6280, [0x0773] = 0x64ec, [0x0774] = 0x6b3a, [0x0775] = 0x72a0,
-  [0x0776] = 0x7591, [0x0777] = 0x7947, [0x0778] = 0x7fa9, [0x0779] = 0x87fb,
-  [0x077a] = 0x8abc, [0x077b] = 0x8b70, [0x077c] = 0x63ac, [0x077d] = 0x83ca,
-  [0x077e] = 0x97a0, [0x077f] = 0x5409, [0x0780] = 0x5403, [0x0781] = 0x55ab,
-  [0x0782] = 0x6854, [0x0783] = 0x6a58, [0x0784] = 0x8a70, [0x0785] = 0x7827,
-  [0x0786] = 0x6775, [0x0787] = 0x9ecd, [0x0788] = 0x5374, [0x0789] = 0x5ba2,
-  [0x078a] = 0x811a, [0x078b] = 0x8650, [0x078c] = 0x9006, [0x078d] = 0x4e18,
-  [0x078e] = 0x4e45, [0x078f] = 0x4ec7, [0x0790] = 0x4f11, [0x0791] = 0x53ca,
-  [0x0792] = 0x5438, [0x0793] = 0x5bae, [0x0794] = 0x5f13, [0x0795] = 0x6025,
-  [0x0796] = 0x6551, [0x0797] = 0x673d, [0x0798] = 0x6c42, [0x0799] = 0x6c72,
-  [0x079a] = 0x6ce3, [0x079b] = 0x7078, [0x079c] = 0x7403, [0x079d] = 0x7a76,
-  [0x079e] = 0x7aae, [0x079f] = 0x7b08, [0x07a0] = 0x7d1a, [0x07a1] = 0x7cfe,
-  [0x07a2] = 0x7d66, [0x07a3] = 0x65e7, [0x07a4] = 0x725b, [0x07a5] = 0x53bb,
-  [0x07a6] = 0x5c45, [0x07a7] = 0x5de8, [0x07a8] = 0x62d2, [0x07a9] = 0x62e0,
-  [0x07aa] = 0x6319, [0x07ab] = 0x6e20, [0x07ac] = 0x865a, [0x07ad] = 0x8a31,
-  [0x07ae] = 0x8ddd, [0x07af] = 0x92f8, [0x07b0] = 0x6f01, [0x07b1] = 0x79a6,
-  [0x07b2] = 0x9b5a, [0x07b3] = 0x4ea8, [0x07b4] = 0x4eab, [0x07b5] = 0x4eac,
-  [0x07b6] = 0x4f9b, [0x07b7] = 0x4fa0, [0x07b8] = 0x50d1, [0x07b9] = 0x5147,
-  [0x07ba] = 0x7af6, [0x07bb] = 0x5171, [0x07bc] = 0x51f6, [0x07bd] = 0x5354,
-  [0x07be] = 0x5321, [0x07bf] = 0x537f, [0x07c0] = 0x53eb, [0x07c1] = 0x55ac,
-  [0x07c2] = 0x5883, [0x07c3] = 0x5ce1, [0x07c4] = 0x5f37, [0x07c5] = 0x5f4a,
-  [0x07c6] = 0x602f, [0x07c7] = 0x6050, [0x07c8] = 0x606d, [0x07c9] = 0x631f,
-  [0x07ca] = 0x6559, [0x07cb] = 0x6a4b, [0x07cc] = 0x6cc1, [0x07cd] = 0x72c2,
-  [0x07ce] = 0x72ed, [0x07cf] = 0x77ef, [0x07d0] = 0x80f8, [0x07d1] = 0x8105,
-  [0x07d2] = 0x8208, [0x07d3] = 0x854e, [0x07d4] = 0x90f7, [0x07d5] = 0x93e1,
-  [0x07d6] = 0x97ff, [0x07d7] = 0x9957, [0x07d8] = 0x9a5a, [0x07d9] = 0x4ef0,
-  [0x07da] = 0x51dd, [0x07db] = 0x5c2d, [0x07dc] = 0x6681, [0x07dd] = 0x696d,
-  [0x07de] = 0x5c40, [0x07df] = 0x66f2, [0x07e0] = 0x6975, [0x07e1] = 0x7389,
-  [0x07e2] = 0x6850, [0x07e3] = 0x7c81, [0x07e4] = 0x50c5, [0x07e5] = 0x52e4,
-  [0x07e6] = 0x5747, [0x07e7] = 0x5dfe, [0x07e8] = 0x9326, [0x07e9] = 0x65a4,
-  [0x07ea] = 0x6b23, [0x07eb] = 0x6b3d, [0x07ec] = 0x7434, [0x07ed] = 0x7981,
-  [0x07ee] = 0x79bd, [0x07ef] = 0x7b4b, [0x07f0] = 0x7dca, [0x07f1] = 0x82b9,
-  [0x07f2] = 0x83cc, [0x07f3] = 0x887f, [0x07f4] = 0x895f, [0x07f5] = 0x8b39,
-  [0x07f6] = 0x8fd1, [0x07f7] = 0x91d1, [0x07f8] = 0x541f, [0x07f9] = 0x9280,
-  [0x07fa] = 0x4e5d, [0x07fb] = 0x5036, [0x07fc] = 0x53e5, [0x07fd] = 0x533a,
-  [0x07fe] = 0x72d7, [0x07ff] = 0x7396, [0x0800] = 0x77e9, [0x0801] = 0x82e6,
-  [0x0802] = 0x8eaf, [0x0803] = 0x99c6, [0x0804] = 0x99c8, [0x0805] = 0x99d2,
-  [0x0806] = 0x5177, [0x0807] = 0x611a, [0x0808] = 0x865e, [0x0809] = 0x55b0,
-  [0x080a] = 0x7a7a, [0x080b] = 0x5076, [0x080c] = 0x5bd3, [0x080d] = 0x9047,
-  [0x080e] = 0x9685, [0x080f] = 0x4e32, [0x0810] = 0x6adb, [0x0811] = 0x91e7,
-  [0x0812] = 0x5c51, [0x0813] = 0x5c48, [0x0814] = 0x6398, [0x0815] = 0x7a9f,
-  [0x0816] = 0x6c93, [0x0817] = 0x9774, [0x0818] = 0x8f61, [0x0819] = 0x7aaa,
-  [0x081a] = 0x718a, [0x081b] = 0x9688, [0x081c] = 0x7c82, [0x081d] = 0x6817,
-  [0x081e] = 0x7e70, [0x081f] = 0x6851, [0x0820] = 0x936c, [0x0821] = 0x52f2,
-  [0x0822] = 0x541b, [0x0823] = 0x85ab, [0x0824] = 0x8a13, [0x0825] = 0x7fa4,
-  [0x0826] = 0x8ecd, [0x0827] = 0x90e1, [0x0828] = 0x5366, [0x0829] = 0x8888,
-  [0x082a] = 0x7941, [0x082b] = 0x4fc2, [0x082c] = 0x50be, [0x082d] = 0x5211,
-  [0x082e] = 0x5144, [0x082f] = 0x5553, [0x0830] = 0x572d, [0x0831] = 0x73ea,
-  [0x0832] = 0x578b, [0x0833] = 0x5951, [0x0834] = 0x5f62, [0x0835] = 0x5f84,
-  [0x0836] = 0x6075, [0x0837] = 0x6176, [0x0838] = 0x6167, [0x0839] = 0x61a9,
-  [0x083a] = 0x63b2, [0x083b] = 0x643a, [0x083c] = 0x656c, [0x083d] = 0x666f,
-  [0x083e] = 0x6842, [0x083f] = 0x6e13, [0x0840] = 0x7566, [0x0841] = 0x7a3d,
-  [0x0842] = 0x7cfb, [0x0843] = 0x7d4c, [0x0844] = 0x7d99, [0x0845] = 0x7e4b,
-  [0x0846] = 0x7f6b, [0x0847] = 0x830e, [0x0848] = 0x834a, [0x0849] = 0x86cd,
-  [0x084a] = 0x8a08, [0x084b] = 0x8a63, [0x084c] = 0x8b66, [0x084d] = 0x8efd,
-  [0x084e] = 0x981a, [0x084f] = 0x9d8f, [0x0850] = 0x82b8, [0x0851] = 0x8fce,
-  [0x0852] = 0x9be8, [0x0853] = 0x5287, [0x0854] = 0x621f, [0x0855] = 0x6483,
-  [0x0856] = 0x6fc0, [0x0857] = 0x9699, [0x0858] = 0x6841, [0x0859] = 0x5091,
-  [0x085a] = 0x6b20, [0x085b] = 0x6c7a, [0x085c] = 0x6f54, [0x085d] = 0x7a74,
-  [0x085e] = 0x7d50, [0x085f] = 0x8840, [0x0860] = 0x8a23, [0x0861] = 0x6708,
-  [0x0862] = 0x4ef6, [0x0863] = 0x5039, [0x0864] = 0x5026, [0x0865] = 0x5065,
-  [0x0866] = 0x517c, [0x0867] = 0x5238, [0x0868] = 0x5263, [0x0869] = 0x55a7,
-  [0x086a] = 0x570f, [0x086b] = 0x5805, [0x086c] = 0x5acc, [0x086d] = 0x5efa,
-  [0x086e] = 0x61b2, [0x086f] = 0x61f8, [0x0870] = 0x62f3, [0x0871] = 0x6372,
-  [0x0872] = 0x691c, [0x0873] = 0x6a29, [0x0874] = 0x727d, [0x0875] = 0x72ac,
-  [0x0876] = 0x732e, [0x0877] = 0x7814, [0x0878] = 0x786f, [0x0879] = 0x7d79,
-  [0x087a] = 0x770c, [0x087b] = 0x80a9, [0x087c] = 0x898b, [0x087d] = 0x8b19,
-  [0x087e] = 0x8ce2, [0x087f] = 0x8ed2, [0x0880] = 0x9063, [0x0881] = 0x9375,
-  [0x0882] = 0x967a, [0x0883] = 0x9855, [0x0884] = 0x9a13, [0x0885] = 0x9e78,
-  [0x0886] = 0x5143, [0x0887] = 0x539f, [0x0888] = 0x53b3, [0x0889] = 0x5e7b,
-  [0x088a] = 0x5f26, [0x088b] = 0x6e1b, [0x088c] = 0x6e90, [0x088d] = 0x7384,
-  [0x088e] = 0x73fe, [0x088f] = 0x7d43, [0x0890] = 0x8237, [0x0891] = 0x8a00,
-  [0x0892] = 0x8afa, [0x0893] = 0x9650, [0x0894] = 0x4e4e, [0x0895] = 0x500b,
-  [0x0896] = 0x53e4, [0x0897] = 0x547c, [0x0898] = 0x56fa, [0x0899] = 0x59d1,
-  [0x089a] = 0x5b64, [0x089b] = 0x5df1, [0x089c] = 0x5eab, [0x089d] = 0x5f27,
-  [0x089e] = 0x6238, [0x089f] = 0x6545, [0x08a0] = 0x67af, [0x08a1] = 0x6e56,
-  [0x08a2] = 0x72d0, [0x08a3] = 0x7cca, [0x08a4] = 0x88b4, [0x08a5] = 0x80a1,
-  [0x08a6] = 0x80e1, [0x08a7] = 0x83f0, [0x08a8] = 0x864e, [0x08a9] = 0x8a87,
-  [0x08aa] = 0x8de8, [0x08ab] = 0x9237, [0x08ac] = 0x96c7, [0x08ad] = 0x9867,
-  [0x08ae] = 0x9f13, [0x08af] = 0x4e94, [0x08b0] = 0x4e92, [0x08b1] = 0x4f0d,
-  [0x08b2] = 0x5348, [0x08b3] = 0x5449, [0x08b4] = 0x543e, [0x08b5] = 0x5a2f,
-  [0x08b6] = 0x5f8c, [0x08b7] = 0x5fa1, [0x08b8] = 0x609f, [0x08b9] = 0x68a7,
-  [0x08ba] = 0x6a8e, [0x08bb] = 0x745a, [0x08bc] = 0x7881, [0x08bd] = 0x8a9e,
-  [0x08be] = 0x8aa4, [0x08bf] = 0x8b77, [0x08c0] = 0x9190, [0x08c1] = 0x4e5e,
-  [0x08c2] = 0x9bc9, [0x08c3] = 0x4ea4, [0x08c4] = 0x4f7c, [0x08c5] = 0x4faf,
-  [0x08c6] = 0x5019, [0x08c7] = 0x5016, [0x08c8] = 0x5149, [0x08c9] = 0x516c,
-  [0x08ca] = 0x529f, [0x08cb] = 0x52b9, [0x08cc] = 0x52fe, [0x08cd] = 0x539a,
-  [0x08ce] = 0x53e3, [0x08cf] = 0x5411, [0x08d0] = 0x540e, [0x08d1] = 0x5589,
-  [0x08d2] = 0x5751, [0x08d3] = 0x57a2, [0x08d4] = 0x597d, [0x08d5] = 0x5b54,
-  [0x08d6] = 0x5b5d, [0x08d7] = 0x5b8f, [0x08d8] = 0x5de5, [0x08d9] = 0x5de7,
-  [0x08da] = 0x5df7, [0x08db] = 0x5e78, [0x08dc] = 0x5e83, [0x08dd] = 0x5e9a,
-  [0x08de] = 0x5eb7, [0x08df] = 0x5f18, [0x08e0] = 0x6052, [0x08e1] = 0x614c,
-  [0x08e2] = 0x6297, [0x08e3] = 0x62d8, [0x08e4] = 0x63a7, [0x08e5] = 0x653b,
-  [0x08e6] = 0x6602, [0x08e7] = 0x6643, [0x08e8] = 0x66f4, [0x08e9] = 0x676d,
-  [0x08ea] = 0x6821, [0x08eb] = 0x6897, [0x08ec] = 0x69cb, [0x08ed] = 0x6c5f,
-  [0x08ee] = 0x6d2a, [0x08ef] = 0x6d69, [0x08f0] = 0x6e2f, [0x08f1] = 0x6e9d,
-  [0x08f2] = 0x7532, [0x08f3] = 0x7687, [0x08f4] = 0x786c, [0x08f5] = 0x7a3f,
-  [0x08f6] = 0x7ce0, [0x08f7] = 0x7d05, [0x08f8] = 0x7d18, [0x08f9] = 0x7d5e,
-  [0x08fa] = 0x7db1, [0x08fb] = 0x8015, [0x08fc] = 0x8003, [0x08fd] = 0x80af,
-  [0x08fe] = 0x80b1, [0x08ff] = 0x8154, [0x0900] = 0x818f, [0x0901] = 0x822a,
-  [0x0902] = 0x8352, [0x0903] = 0x884c, [0x0904] = 0x8861, [0x0905] = 0x8b1b,
-  [0x0906] = 0x8ca2, [0x0907] = 0x8cfc, [0x0908] = 0x90ca, [0x0909] = 0x9175,
-  [0x090a] = 0x9271, [0x090b] = 0x783f, [0x090c] = 0x92fc, [0x090d] = 0x95a4,
-  [0x090e] = 0x964d, [0x090f] = 0x9805, [0x0910] = 0x9999, [0x0911] = 0x9ad8,
-  [0x0912] = 0x9d3b, [0x0913] = 0x525b, [0x0914] = 0x52ab, [0x0915] = 0x53f7,
-  [0x0916] = 0x5408, [0x0917] = 0x58d5, [0x0918] = 0x62f7, [0x0919] = 0x6fe0,
-  [0x091a] = 0x8c6a, [0x091b] = 0x8f5f, [0x091c] = 0x9eb9, [0x091d] = 0x514b,
-  [0x091e] = 0x523b, [0x091f] = 0x544a, [0x0920] = 0x56fd, [0x0921] = 0x7a40,
-  [0x0922] = 0x9177, [0x0923] = 0x9d60, [0x0924] = 0x9ed2, [0x0925] = 0x7344,
-  [0x0926] = 0x6f09, [0x0927] = 0x8170, [0x0928] = 0x7511, [0x0929] = 0x5ffd,
-  [0x092a] = 0x60da, [0x092b] = 0x9aa8, [0x092c] = 0x72db, [0x092d] = 0x8fbc,
-  [0x092e] = 0x6b64, [0x092f] = 0x9803, [0x0930] = 0x4eca, [0x0931] = 0x56f0,
-  [0x0932] = 0x5764, [0x0933] = 0x58be, [0x0934] = 0x5a5a, [0x0935] = 0x6068,
-  [0x0936] = 0x61c7, [0x0937] = 0x660f, [0x0938] = 0x6606, [0x0939] = 0x6839,
-  [0x093a] = 0x68b1, [0x093b] = 0x6df7, [0x093c] = 0x75d5, [0x093d] = 0x7d3a,
-  [0x093e] = 0x826e, [0x093f] = 0x9b42, [0x0940] = 0x4e9b, [0x0941] = 0x4f50,
-  [0x0942] = 0x53c9, [0x0943] = 0x5506, [0x0944] = 0x5d6f, [0x0945] = 0x5de6,
-  [0x0946] = 0x5dee, [0x0947] = 0x67fb, [0x0948] = 0x6c99, [0x0949] = 0x7473,
-  [0x094a] = 0x7802, [0x094b] = 0x8a50, [0x094c] = 0x9396, [0x094d] = 0x88df,
-  [0x094e] = 0x5750, [0x094f] = 0x5ea7, [0x0950] = 0x632b, [0x0951] = 0x50b5,
-  [0x0952] = 0x50ac, [0x0953] = 0x518d, [0x0954] = 0x6700, [0x0955] = 0x54c9,
-  [0x0956] = 0x585e, [0x0957] = 0x59bb, [0x0958] = 0x5bb0, [0x0959] = 0x5f69,
-  [0x095a] = 0x624d, [0x095b] = 0x63a1, [0x095c] = 0x683d, [0x095d] = 0x6b73,
-  [0x095e] = 0x6e08, [0x095f] = 0x707d, [0x0960] = 0x91c7, [0x0961] = 0x7280,
-  [0x0962] = 0x7815, [0x0963] = 0x7826, [0x0964] = 0x796d, [0x0965] = 0x658e,
-  [0x0966] = 0x7d30, [0x0967] = 0x83dc, [0x0968] = 0x88c1, [0x0969] = 0x8f09,
-  [0x096a] = 0x969b, [0x096b] = 0x5264, [0x096c] = 0x5728, [0x096d] = 0x6750,
-  [0x096e] = 0x7f6a, [0x096f] = 0x8ca1, [0x0970] = 0x51b4, [0x0971] = 0x5742,
-  [0x0972] = 0x962a, [0x0973] = 0x583a, [0x0974] = 0x698a, [0x0975] = 0x80b4,
-  [0x0976] = 0x54b2, [0x0977] = 0x5d0e, [0x0978] = 0x57fc, [0x0979] = 0x7895,
-  [0x097a] = 0x9dfa, [0x097b] = 0x4f5c, [0x097c] = 0x524a, [0x097d] = 0x548b,
-  [0x097e] = 0x643e, [0x097f] = 0x6628, [0x0980] = 0x6714, [0x0981] = 0x67f5,
-  [0x0982] = 0x7a84, [0x0983] = 0x7b56, [0x0984] = 0x7d22, [0x0985] = 0x932f,
-  [0x0986] = 0x685c, [0x0987] = 0x9bad, [0x0988] = 0x7b39, [0x0989] = 0x5319,
-  [0x098a] = 0x518a, [0x098b] = 0x5237, [0x098c] = 0x5bdf, [0x098d] = 0x62f6,
-  [0x098e] = 0x64ae, [0x098f] = 0x64e6, [0x0990] = 0x672d, [0x0991] = 0x6bba,
-  [0x0992] = 0x85a9, [0x0993] = 0x96d1, [0x0994] = 0x7690, [0x0995] = 0x9bd6,
-  [0x0996] = 0x634c, [0x0997] = 0x9306, [0x0998] = 0x9bab, [0x0999] = 0x76bf,
-  [0x099a] = 0x6652, [0x099b] = 0x4e09, [0x099c] = 0x5098, [0x099d] = 0x53c2,
-  [0x099e] = 0x5c71, [0x099f] = 0x60e8, [0x09a0] = 0x6492, [0x09a1] = 0x6563,
-  [0x09a2] = 0x685f, [0x09a3] = 0x71e6, [0x09a4] = 0x73ca, [0x09a5] = 0x7523,
-  [0x09a6] = 0x7b97, [0x09a7] = 0x7e82, [0x09a8] = 0x8695, [0x09a9] = 0x8b83,
-  [0x09aa] = 0x8cdb, [0x09ab] = 0x9178, [0x09ac] = 0x9910, [0x09ad] = 0x65ac,
-  [0x09ae] = 0x66ab, [0x09af] = 0x6b8b, [0x09b0] = 0x4ed5, [0x09b1] = 0x4ed4,
-  [0x09b2] = 0x4f3a, [0x09b3] = 0x4f7f, [0x09b4] = 0x523a, [0x09b5] = 0x53f8,
-  [0x09b6] = 0x53f2, [0x09b7] = 0x55e3, [0x09b8] = 0x56db, [0x09b9] = 0x58eb,
-  [0x09ba] = 0x59cb, [0x09bb] = 0x59c9, [0x09bc] = 0x59ff, [0x09bd] = 0x5b50,
-  [0x09be] = 0x5c4d, [0x09bf] = 0x5e02, [0x09c0] = 0x5e2b, [0x09c1] = 0x5fd7,
-  [0x09c2] = 0x601d, [0x09c3] = 0x6307, [0x09c4] = 0x652f, [0x09c5] = 0x5b5c,
-  [0x09c6] = 0x65af, [0x09c7] = 0x65bd, [0x09c8] = 0x65e8, [0x09c9] = 0x679d,
-  [0x09ca] = 0x6b62, [0x09cb] = 0x6b7b, [0x09cc] = 0x6c0f, [0x09cd] = 0x7345,
-  [0x09ce] = 0x7949, [0x09cf] = 0x79c1, [0x09d0] = 0x7cf8, [0x09d1] = 0x7d19,
-  [0x09d2] = 0x7d2b, [0x09d3] = 0x80a2, [0x09d4] = 0x8102, [0x09d5] = 0x81f3,
-  [0x09d6] = 0x8996, [0x09d7] = 0x8a5e, [0x09d8] = 0x8a69, [0x09d9] = 0x8a66,
-  [0x09da] = 0x8a8c, [0x09db] = 0x8aee, [0x09dc] = 0x8cc7, [0x09dd] = 0x8cdc,
-  [0x09de] = 0x96cc, [0x09df] = 0x98fc, [0x09e0] = 0x6b6f, [0x09e1] = 0x4e8b,
-  [0x09e2] = 0x4f3c, [0x09e3] = 0x4f8d, [0x09e4] = 0x5150, [0x09e5] = 0x5b57,
-  [0x09e6] = 0x5bfa, [0x09e7] = 0x6148, [0x09e8] = 0x6301, [0x09e9] = 0x6642,
-  [0x09ea] = 0x6b21, [0x09eb] = 0x6ecb, [0x09ec] = 0x6cbb, [0x09ed] = 0x723e,
-  [0x09ee] = 0x74bd, [0x09ef] = 0x75d4, [0x09f0] = 0x78c1, [0x09f1] = 0x793a,
-  [0x09f2] = 0x800c, [0x09f3] = 0x8033, [0x09f4] = 0x81ea, [0x09f5] = 0x8494,
-  [0x09f6] = 0x8f9e, [0x09f7] = 0x6c50, [0x09f8] = 0x9e7f, [0x09f9] = 0x5f0f,
-  [0x09fa] = 0x8b58, [0x09fb] = 0x9d2b, [0x09fc] = 0x7afa, [0x09fd] = 0x8ef8,
-  [0x09fe] = 0x5b8d, [0x09ff] = 0x96eb, [0x0a00] = 0x4e03, [0x0a01] = 0x53f1,
-  [0x0a02] = 0x57f7, [0x0a03] = 0x5931, [0x0a04] = 0x5ac9, [0x0a05] = 0x5ba4,
-  [0x0a06] = 0x6089, [0x0a07] = 0x6e7f, [0x0a08] = 0x6f06, [0x0a09] = 0x75be,
-  [0x0a0a] = 0x8cea, [0x0a0b] = 0x5b9f, [0x0a0c] = 0x8500, [0x0a0d] = 0x7be0,
-  [0x0a0e] = 0x5072, [0x0a0f] = 0x67f4, [0x0a10] = 0x829d, [0x0a11] = 0x5c61,
-  [0x0a12] = 0x854a, [0x0a13] = 0x7e1e, [0x0a14] = 0x820e, [0x0a15] = 0x5199,
-  [0x0a16] = 0x5c04, [0x0a17] = 0x6368, [0x0a18] = 0x8d66, [0x0a19] = 0x659c,
-  [0x0a1a] = 0x716e, [0x0a1b] = 0x793e, [0x0a1c] = 0x7d17, [0x0a1d] = 0x8005,
-  [0x0a1e] = 0x8b1d, [0x0a1f] = 0x8eca, [0x0a20] = 0x906e, [0x0a21] = 0x86c7,
-  [0x0a22] = 0x90aa, [0x0a23] = 0x501f, [0x0a24] = 0x52fa, [0x0a25] = 0x5c3a,
-  [0x0a26] = 0x6753, [0x0a27] = 0x707c, [0x0a28] = 0x7235, [0x0a29] = 0x914c,
-  [0x0a2a] = 0x91c8, [0x0a2b] = 0x932b, [0x0a2c] = 0x82e5, [0x0a2d] = 0x5bc2,
-  [0x0a2e] = 0x5f31, [0x0a2f] = 0x60f9, [0x0a30] = 0x4e3b, [0x0a31] = 0x53d6,
-  [0x0a32] = 0x5b88, [0x0a33] = 0x624b, [0x0a34] = 0x6731, [0x0a35] = 0x6b8a,
-  [0x0a36] = 0x72e9, [0x0a37] = 0x73e0, [0x0a38] = 0x7a2e, [0x0a39] = 0x816b,
-  [0x0a3a] = 0x8da3, [0x0a3b] = 0x9152, [0x0a3c] = 0x9996, [0x0a3d] = 0x5112,
-  [0x0a3e] = 0x53d7, [0x0a3f] = 0x546a, [0x0a40] = 0x5bff, [0x0a41] = 0x6388,
-  [0x0a42] = 0x6a39, [0x0a43] = 0x7dac, [0x0a44] = 0x9700, [0x0a45] = 0x56da,
-  [0x0a46] = 0x53ce, [0x0a47] = 0x5468, [0x0a48] = 0x5b97, [0x0a49] = 0x5c31,
-  [0x0a4a] = 0x5dde, [0x0a4b] = 0x4fee, [0x0a4c] = 0x6101, [0x0a4d] = 0x62fe,
-  [0x0a4e] = 0x6d32, [0x0a4f] = 0x79c0, [0x0a50] = 0x79cb, [0x0a51] = 0x7d42,
-  [0x0a52] = 0x7e4d, [0x0a53] = 0x7fd2, [0x0a54] = 0x81ed, [0x0a55] = 0x821f,
-  [0x0a56] = 0x8490, [0x0a57] = 0x8846, [0x0a58] = 0x8972, [0x0a59] = 0x8b90,
-  [0x0a5a] = 0x8e74, [0x0a5b] = 0x8f2f, [0x0a5c] = 0x9031, [0x0a5d] = 0x914b,
-  [0x0a5e] = 0x916c, [0x0a5f] = 0x96c6, [0x0a60] = 0x919c, [0x0a61] = 0x4ec0,
-  [0x0a62] = 0x4f4f, [0x0a63] = 0x5145, [0x0a64] = 0x5341, [0x0a65] = 0x5f93,
-  [0x0a66] = 0x620e, [0x0a67] = 0x67d4, [0x0a68] = 0x6c41, [0x0a69] = 0x6e0b,
-  [0x0a6a] = 0x7363, [0x0a6b] = 0x7e26, [0x0a6c] = 0x91cd, [0x0a6d] = 0x9283,
-  [0x0a6e] = 0x53d4, [0x0a6f] = 0x5919, [0x0a70] = 0x5bbf, [0x0a71] = 0x6dd1,
-  [0x0a72] = 0x795d, [0x0a73] = 0x7e2e, [0x0a74] = 0x7c9b, [0x0a75] = 0x587e,
-  [0x0a76] = 0x719f, [0x0a77] = 0x51fa, [0x0a78] = 0x8853, [0x0a79] = 0x8ff0,
-  [0x0a7a] = 0x4fca, [0x0a7b] = 0x5cfb, [0x0a7c] = 0x6625, [0x0a7d] = 0x77ac,
-  [0x0a7e] = 0x7ae3, [0x0a7f] = 0x821c, [0x0a80] = 0x99ff, [0x0a81] = 0x51c6,
-  [0x0a82] = 0x5faa, [0x0a83] = 0x65ec, [0x0a84] = 0x696f, [0x0a85] = 0x6b89,
-  [0x0a86] = 0x6df3, [0x0a87] = 0x6e96, [0x0a88] = 0x6f64, [0x0a89] = 0x76fe,
-  [0x0a8a] = 0x7d14, [0x0a8b] = 0x5de1, [0x0a8c] = 0x9075, [0x0a8d] = 0x9187,
-  [0x0a8e] = 0x9806, [0x0a8f] = 0x51e6, [0x0a90] = 0x521d, [0x0a91] = 0x6240,
-  [0x0a92] = 0x6691, [0x0a93] = 0x66d9, [0x0a94] = 0x6e1a, [0x0a95] = 0x5eb6,
-  [0x0a96] = 0x7dd2, [0x0a97] = 0x7f72, [0x0a98] = 0x66f8, [0x0a99] = 0x85af,
-  [0x0a9a] = 0x85f7, [0x0a9b] = 0x8af8, [0x0a9c] = 0x52a9, [0x0a9d] = 0x53d9,
-  [0x0a9e] = 0x5973, [0x0a9f] = 0x5e8f, [0x0aa0] = 0x5f90, [0x0aa1] = 0x6055,
-  [0x0aa2] = 0x92e4, [0x0aa3] = 0x9664, [0x0aa4] = 0x50b7, [0x0aa5] = 0x511f,
-  [0x0aa6] = 0x52dd, [0x0aa7] = 0x5320, [0x0aa8] = 0x5347, [0x0aa9] = 0x53ec,
-  [0x0aaa] = 0x54e8, [0x0aab] = 0x5546, [0x0aac] = 0x5531, [0x0aad] = 0x5617,
-  [0x0aae] = 0x5968, [0x0aaf] = 0x59be, [0x0ab0] = 0x5a3c, [0x0ab1] = 0x5bb5,
-  [0x0ab2] = 0x5c06, [0x0ab3] = 0x5c0f, [0x0ab4] = 0x5c11, [0x0ab5] = 0x5c1a,
-  [0x0ab6] = 0x5e84, [0x0ab7] = 0x5e8a, [0x0ab8] = 0x5ee0, [0x0ab9] = 0x5f70,
-  [0x0aba] = 0x627f, [0x0abb] = 0x6284, [0x0abc] = 0x62db, [0x0abd] = 0x638c,
-  [0x0abe] = 0x6377, [0x0abf] = 0x6607, [0x0ac0] = 0x660c, [0x0ac1] = 0x662d,
-  [0x0ac2] = 0x6676, [0x0ac3] = 0x677e, [0x0ac4] = 0x68a2, [0x0ac5] = 0x6a1f,
-  [0x0ac6] = 0x6a35, [0x0ac7] = 0x6cbc, [0x0ac8] = 0x6d88, [0x0ac9] = 0x6e09,
-  [0x0aca] = 0x6e58, [0x0acb] = 0x713c, [0x0acc] = 0x7126, [0x0acd] = 0x7167,
-  [0x0ace] = 0x75c7, [0x0acf] = 0x7701, [0x0ad0] = 0x785d, [0x0ad1] = 0x7901,
-  [0x0ad2] = 0x7965, [0x0ad3] = 0x79f0, [0x0ad4] = 0x7ae0, [0x0ad5] = 0x7b11,
-  [0x0ad6] = 0x7ca7, [0x0ad7] = 0x7d39, [0x0ad8] = 0x8096, [0x0ad9] = 0x83d6,
-  [0x0ada] = 0x848b, [0x0adb] = 0x8549, [0x0adc] = 0x885d, [0x0add] = 0x88f3,
-  [0x0ade] = 0x8a1f, [0x0adf] = 0x8a3c, [0x0ae0] = 0x8a54, [0x0ae1] = 0x8a73,
-  [0x0ae2] = 0x8c61, [0x0ae3] = 0x8cde, [0x0ae4] = 0x91a4, [0x0ae5] = 0x9266,
-  [0x0ae6] = 0x937e, [0x0ae7] = 0x9418, [0x0ae8] = 0x969c, [0x0ae9] = 0x9798,
-  [0x0aea] = 0x4e0a, [0x0aeb] = 0x4e08, [0x0aec] = 0x4e1e, [0x0aed] = 0x4e57,
-  [0x0aee] = 0x5197, [0x0aef] = 0x5270, [0x0af0] = 0x57ce, [0x0af1] = 0x5834,
-  [0x0af2] = 0x58cc, [0x0af3] = 0x5b22, [0x0af4] = 0x5e38, [0x0af5] = 0x60c5,
-  [0x0af6] = 0x64fe, [0x0af7] = 0x6761, [0x0af8] = 0x6756, [0x0af9] = 0x6d44,
-  [0x0afa] = 0x72b6, [0x0afb] = 0x7573, [0x0afc] = 0x7a63, [0x0afd] = 0x84b8,
-  [0x0afe] = 0x8b72, [0x0aff] = 0x91b8, [0x0b00] = 0x9320, [0x0b01] = 0x5631,
-  [0x0b02] = 0x57f4, [0x0b03] = 0x98fe, [0x0b04] = 0x62ed, [0x0b05] = 0x690d,
-  [0x0b06] = 0x6b96, [0x0b07] = 0x71ed, [0x0b08] = 0x7e54, [0x0b09] = 0x8077,
-  [0x0b0a] = 0x8272, [0x0b0b] = 0x89e6, [0x0b0c] = 0x98df, [0x0b0d] = 0x8755,
-  [0x0b0e] = 0x8fb1, [0x0b0f] = 0x5c3b, [0x0b10] = 0x4f38, [0x0b11] = 0x4fe1,
-  [0x0b12] = 0x4fb5, [0x0b13] = 0x5507, [0x0b14] = 0x5a20, [0x0b15] = 0x5bdd,
-  [0x0b16] = 0x5be9, [0x0b17] = 0x5fc3, [0x0b18] = 0x614e, [0x0b19] = 0x632f,
-  [0x0b1a] = 0x65b0, [0x0b1b] = 0x664b, [0x0b1c] = 0x68ee, [0x0b1d] = 0x699b,
-  [0x0b1e] = 0x6d78, [0x0b1f] = 0x6df1, [0x0b20] = 0x7533, [0x0b21] = 0x75b9,
-  [0x0b22] = 0x771f, [0x0b23] = 0x795e, [0x0b24] = 0x79e6, [0x0b25] = 0x7d33,
-  [0x0b26] = 0x81e3, [0x0b27] = 0x82af, [0x0b28] = 0x85aa, [0x0b29] = 0x89aa,
-  [0x0b2a] = 0x8a3a, [0x0b2b] = 0x8eab, [0x0b2c] = 0x8f9b, [0x0b2d] = 0x9032,
-  [0x0b2e] = 0x91dd, [0x0b2f] = 0x9707, [0x0b30] = 0x4eba, [0x0b31] = 0x4ec1,
-  [0x0b32] = 0x5203, [0x0b33] = 0x5875, [0x0b34] = 0x58ec, [0x0b35] = 0x5c0b,
-  [0x0b36] = 0x751a, [0x0b37] = 0x5c3d, [0x0b38] = 0x814e, [0x0b39] = 0x8a0a,
-  [0x0b3a] = 0x8fc5, [0x0b3b] = 0x9663, [0x0b3c] = 0x976d, [0x0b3d] = 0x7b25,
-  [0x0b3e] = 0x8acf, [0x0b3f] = 0x9808, [0x0b40] = 0x9162, [0x0b41] = 0x56f3,
-  [0x0b42] = 0x53a8, [0x0b43] = 0x9017, [0x0b44] = 0x5439, [0x0b45] = 0x5782,
-  [0x0b46] = 0x5e25, [0x0b47] = 0x63a8, [0x0b48] = 0x6c34, [0x0b49] = 0x708a,
-  [0x0b4a] = 0x7761, [0x0b4b] = 0x7c8b, [0x0b4c] = 0x7fe0, [0x0b4d] = 0x8870,
-  [0x0b4e] = 0x9042, [0x0b4f] = 0x9154, [0x0b50] = 0x9310, [0x0b51] = 0x9318,
-  [0x0b52] = 0x968f, [0x0b53] = 0x745e, [0x0b54] = 0x9ac4, [0x0b55] = 0x5d07,
-  [0x0b56] = 0x5d69, [0x0b57] = 0x6570, [0x0b58] = 0x67a2, [0x0b59] = 0x8da8,
-  [0x0b5a] = 0x96db, [0x0b5b] = 0x636e, [0x0b5c] = 0x6749, [0x0b5d] = 0x6919,
-  [0x0b5e] = 0x83c5, [0x0b5f] = 0x9817, [0x0b60] = 0x96c0, [0x0b61] = 0x88fe,
-  [0x0b62] = 0x6f84, [0x0b63] = 0x647a, [0x0b64] = 0x5bf8, [0x0b65] = 0x4e16,
-  [0x0b66] = 0x702c, [0x0b67] = 0x755d, [0x0b68] = 0x662f, [0x0b69] = 0x51c4,
-  [0x0b6a] = 0x5236, [0x0b6b] = 0x52e2, [0x0b6c] = 0x59d3, [0x0b6d] = 0x5f81,
-  [0x0b6e] = 0x6027, [0x0b6f] = 0x6210, [0x0b70] = 0x653f, [0x0b71] = 0x6574,
-  [0x0b72] = 0x661f, [0x0b73] = 0x6674, [0x0b74] = 0x68f2, [0x0b75] = 0x6816,
-  [0x0b76] = 0x6b63, [0x0b77] = 0x6e05, [0x0b78] = 0x7272, [0x0b79] = 0x751f,
-  [0x0b7a] = 0x76db, [0x0b7b] = 0x7cbe, [0x0b7c] = 0x8056, [0x0b7d] = 0x58f0,
-  [0x0b7e] = 0x88fd, [0x0b7f] = 0x897f, [0x0b80] = 0x8aa0, [0x0b81] = 0x8a93,
-  [0x0b82] = 0x8acb, [0x0b83] = 0x901d, [0x0b84] = 0x9192, [0x0b85] = 0x9752,
-  [0x0b86] = 0x9759, [0x0b87] = 0x6589, [0x0b88] = 0x7a0e, [0x0b89] = 0x8106,
-  [0x0b8a] = 0x96bb, [0x0b8b] = 0x5e2d, [0x0b8c] = 0x60dc, [0x0b8d] = 0x621a,
-  [0x0b8e] = 0x65a5, [0x0b8f] = 0x6614, [0x0b90] = 0x6790, [0x0b91] = 0x77f3,
-  [0x0b92] = 0x7a4d, [0x0b93] = 0x7c4d, [0x0b94] = 0x7e3e, [0x0b95] = 0x810a,
-  [0x0b96] = 0x8cac, [0x0b97] = 0x8d64, [0x0b98] = 0x8de1, [0x0b99] = 0x8e5f,
-  [0x0b9a] = 0x78a9, [0x0b9b] = 0x5207, [0x0b9c] = 0x62d9, [0x0b9d] = 0x63a5,
-  [0x0b9e] = 0x6442, [0x0b9f] = 0x6298, [0x0ba0] = 0x8a2d, [0x0ba1] = 0x7a83,
-  [0x0ba2] = 0x7bc0, [0x0ba3] = 0x8aac, [0x0ba4] = 0x96ea, [0x0ba5] = 0x7d76,
-  [0x0ba6] = 0x820c, [0x0ba7] = 0x8749, [0x0ba8] = 0x4ed9, [0x0ba9] = 0x5148,
-  [0x0baa] = 0x5343, [0x0bab] = 0x5360, [0x0bac] = 0x5ba3, [0x0bad] = 0x5c02,
-  [0x0bae] = 0x5c16, [0x0baf] = 0x5ddd, [0x0bb0] = 0x6226, [0x0bb1] = 0x6247,
-  [0x0bb2] = 0x64b0, [0x0bb3] = 0x6813, [0x0bb4] = 0x6834, [0x0bb5] = 0x6cc9,
-  [0x0bb6] = 0x6d45, [0x0bb7] = 0x6d17, [0x0bb8] = 0x67d3, [0x0bb9] = 0x6f5c,
-  [0x0bba] = 0x714e, [0x0bbb] = 0x717d, [0x0bbc] = 0x65cb, [0x0bbd] = 0x7a7f,
-  [0x0bbe] = 0x7bad, [0x0bbf] = 0x7dda, [0x0bc0] = 0x7e4a, [0x0bc1] = 0x7fa8,
-  [0x0bc2] = 0x817a, [0x0bc3] = 0x821b, [0x0bc4] = 0x8239, [0x0bc5] = 0x85a6,
-  [0x0bc6] = 0x8a6e, [0x0bc7] = 0x8cce, [0x0bc8] = 0x8df5, [0x0bc9] = 0x9078,
-  [0x0bca] = 0x9077, [0x0bcb] = 0x92ad, [0x0bcc] = 0x9291, [0x0bcd] = 0x9583,
-  [0x0bce] = 0x9bae, [0x0bcf] = 0x524d, [0x0bd0] = 0x5584, [0x0bd1] = 0x6f38,
-  [0x0bd2] = 0x7136, [0x0bd3] = 0x5168, [0x0bd4] = 0x7985, [0x0bd5] = 0x7e55,
-  [0x0bd6] = 0x81b3, [0x0bd7] = 0x7cce, [0x0bd8] = 0x564c, [0x0bd9] = 0x5851,
-  [0x0bda] = 0x5ca8, [0x0bdb] = 0x63aa, [0x0bdc] = 0x66fe, [0x0bdd] = 0x66fd,
-  [0x0bde] = 0x695a, [0x0bdf] = 0x72d9, [0x0be0] = 0x758f, [0x0be1] = 0x758e,
-  [0x0be2] = 0x790e, [0x0be3] = 0x7956, [0x0be4] = 0x79df, [0x0be5] = 0x7c97,
-  [0x0be6] = 0x7d20, [0x0be7] = 0x7d44, [0x0be8] = 0x8607, [0x0be9] = 0x8a34,
-  [0x0bea] = 0x963b, [0x0beb] = 0x9061, [0x0bec] = 0x9f20, [0x0bed] = 0x50e7,
-  [0x0bee] = 0x5275, [0x0bef] = 0x53cc, [0x0bf0] = 0x53e2, [0x0bf1] = 0x5009,
-  [0x0bf2] = 0x55aa, [0x0bf3] = 0x58ee, [0x0bf4] = 0x594f, [0x0bf5] = 0x723d,
-  [0x0bf6] = 0x5b8b, [0x0bf7] = 0x5c64, [0x0bf8] = 0x531d, [0x0bf9] = 0x60e3,
-  [0x0bfa] = 0x60f3, [0x0bfb] = 0x635c, [0x0bfc] = 0x6383, [0x0bfd] = 0x633f,
-  [0x0bfe] = 0x63bb, [0x0bff] = 0x64cd, [0x0c00] = 0x65e9, [0x0c01] = 0x66f9,
-  [0x0c02] = 0x5de3, [0x0c03] = 0x69cd, [0x0c04] = 0x69fd, [0x0c05] = 0x6f15,
-  [0x0c06] = 0x71e5, [0x0c07] = 0x4e89, [0x0c08] = 0x75e9, [0x0c09] = 0x76f8,
-  [0x0c0a] = 0x7a93, [0x0c0b] = 0x7cdf, [0x0c0c] = 0x7dcf, [0x0c0d] = 0x7d9c,
-  [0x0c0e] = 0x8061, [0x0c0f] = 0x8349, [0x0c10] = 0x8358, [0x0c11] = 0x846c,
-  [0x0c12] = 0x84bc, [0x0c13] = 0x85fb, [0x0c14] = 0x88c5, [0x0c15] = 0x8d70,
-  [0x0c16] = 0x9001, [0x0c17] = 0x906d, [0x0c18] = 0x9397, [0x0c19] = 0x971c,
-  [0x0c1a] = 0x9a12, [0x0c1b] = 0x50cf, [0x0c1c] = 0x5897, [0x0c1d] = 0x618e,
-  [0x0c1e] = 0x81d3, [0x0c1f] = 0x8535, [0x0c20] = 0x8d08, [0x0c21] = 0x9020,
-  [0x0c22] = 0x4fc3, [0x0c23] = 0x5074, [0x0c24] = 0x5247, [0x0c25] = 0x5373,
-  [0x0c26] = 0x606f, [0x0c27] = 0x6349, [0x0c28] = 0x675f, [0x0c29] = 0x6e2c,
-  [0x0c2a] = 0x8db3, [0x0c2b] = 0x901f, [0x0c2c] = 0x4fd7, [0x0c2d] = 0x5c5e,
-  [0x0c2e] = 0x8cca, [0x0c2f] = 0x65cf, [0x0c30] = 0x7d9a, [0x0c31] = 0x5352,
-  [0x0c32] = 0x8896, [0x0c33] = 0x5176, [0x0c34] = 0x63c3, [0x0c35] = 0x5b58,
-  [0x0c36] = 0x5b6b, [0x0c37] = 0x5c0a, [0x0c38] = 0x640d, [0x0c39] = 0x6751,
-  [0x0c3a] = 0x905c, [0x0c3b] = 0x4ed6, [0x0c3c] = 0x591a, [0x0c3d] = 0x592a,
-  [0x0c3e] = 0x6c70, [0x0c3f] = 0x8a51, [0x0c40] = 0x553e, [0x0c41] = 0x5815,
-  [0x0c42] = 0x59a5, [0x0c43] = 0x60f0, [0x0c44] = 0x6253, [0x0c45] = 0x67c1,
-  [0x0c46] = 0x8235, [0x0c47] = 0x6955, [0x0c48] = 0x9640, [0x0c49] = 0x99c4,
-  [0x0c4a] = 0x9a28, [0x0c4b] = 0x4f53, [0x0c4c] = 0x5806, [0x0c4d] = 0x5bfe,
-  [0x0c4e] = 0x8010, [0x0c4f] = 0x5cb1, [0x0c50] = 0x5e2f, [0x0c51] = 0x5f85,
-  [0x0c52] = 0x6020, [0x0c53] = 0x614b, [0x0c54] = 0x6234, [0x0c55] = 0x66ff,
-  [0x0c56] = 0x6cf0, [0x0c57] = 0x6ede, [0x0c58] = 0x80ce, [0x0c59] = 0x817f,
-  [0x0c5a] = 0x82d4, [0x0c5b] = 0x888b, [0x0c5c] = 0x8cb8, [0x0c5d] = 0x9000,
-  [0x0c5e] = 0x902e, [0x0c5f] = 0x968a, [0x0c60] = 0x9edb, [0x0c61] = 0x9bdb,
-  [0x0c62] = 0x4ee3, [0x0c63] = 0x53f0, [0x0c64] = 0x5927, [0x0c65] = 0x7b2c,
-  [0x0c66] = 0x918d, [0x0c67] = 0x984c, [0x0c68] = 0x9df9, [0x0c69] = 0x6edd,
-  [0x0c6a] = 0x7027, [0x0c6b] = 0x5353, [0x0c6c] = 0x5544, [0x0c6d] = 0x5b85,
-  [0x0c6e] = 0x6258, [0x0c6f] = 0x629e, [0x0c70] = 0x62d3, [0x0c71] = 0x6ca2,
-  [0x0c72] = 0x6fef, [0x0c73] = 0x7422, [0x0c74] = 0x8a17, [0x0c75] = 0x9438,
-  [0x0c76] = 0x6fc1, [0x0c77] = 0x8afe, [0x0c78] = 0x8338, [0x0c79] = 0x51e7,
-  [0x0c7a] = 0x86f8, [0x0c7b] = 0x53ea, [0x0c7c] = 0x53e9, [0x0c7d] = 0x4f46,
-  [0x0c7e] = 0x9054, [0x0c7f] = 0x8fb0, [0x0c80] = 0x596a, [0x0c81] = 0x8131,
-  [0x0c82] = 0x5dfd, [0x0c83] = 0x7aea, [0x0c84] = 0x8fbf, [0x0c85] = 0x68da,
-  [0x0c86] = 0x8c37, [0x0c87] = 0x72f8, [0x0c88] = 0x9c48, [0x0c89] = 0x6a3d,
-  [0x0c8a] = 0x8ab0, [0x0c8b] = 0x4e39, [0x0c8c] = 0x5358, [0x0c8d] = 0x5606,
-  [0x0c8e] = 0x5766, [0x0c8f] = 0x62c5, [0x0c90] = 0x63a2, [0x0c91] = 0x65e6,
-  [0x0c92] = 0x6b4e, [0x0c93] = 0x6de1, [0x0c94] = 0x6e5b, [0x0c95] = 0x70ad,
-  [0x0c96] = 0x77ed, [0x0c97] = 0x7aef, [0x0c98] = 0x7baa, [0x0c99] = 0x7dbb,
-  [0x0c9a] = 0x803d, [0x0c9b] = 0x80c6, [0x0c9c] = 0x86cb, [0x0c9d] = 0x8a95,
-  [0x0c9e] = 0x935b, [0x0c9f] = 0x56e3, [0x0ca0] = 0x58c7, [0x0ca1] = 0x5f3e,
-  [0x0ca2] = 0x65ad, [0x0ca3] = 0x6696, [0x0ca4] = 0x6a80, [0x0ca5] = 0x6bb5,
-  [0x0ca6] = 0x7537, [0x0ca7] = 0x8ac7, [0x0ca8] = 0x5024, [0x0ca9] = 0x77e5,
-  [0x0caa] = 0x5730, [0x0cab] = 0x5f1b, [0x0cac] = 0x6065, [0x0cad] = 0x667a,
-  [0x0cae] = 0x6c60, [0x0caf] = 0x75f4, [0x0cb0] = 0x7a1a, [0x0cb1] = 0x7f6e,
-  [0x0cb2] = 0x81f4, [0x0cb3] = 0x8718, [0x0cb4] = 0x9045, [0x0cb5] = 0x99b3,
-  [0x0cb6] = 0x7bc9, [0x0cb7] = 0x755c, [0x0cb8] = 0x7af9, [0x0cb9] = 0x7b51,
-  [0x0cba] = 0x84c4, [0x0cbb] = 0x9010, [0x0cbc] = 0x79e9, [0x0cbd] = 0x7a92,
-  [0x0cbe] = 0x8336, [0x0cbf] = 0x5ae1, [0x0cc0] = 0x7740, [0x0cc1] = 0x4e2d,
-  [0x0cc2] = 0x4ef2, [0x0cc3] = 0x5b99, [0x0cc4] = 0x5fe0, [0x0cc5] = 0x62bd,
-  [0x0cc6] = 0x663c, [0x0cc7] = 0x67f1, [0x0cc8] = 0x6ce8, [0x0cc9] = 0x866b,
-  [0x0cca] = 0x8877, [0x0ccb] = 0x8a3b, [0x0ccc] = 0x914e, [0x0ccd] = 0x92f3,
-  [0x0cce] = 0x99d0, [0x0ccf] = 0x6a17, [0x0cd0] = 0x7026, [0x0cd1] = 0x732a,
-  [0x0cd2] = 0x82e7, [0x0cd3] = 0x8457, [0x0cd4] = 0x8caf, [0x0cd5] = 0x4e01,
-  [0x0cd6] = 0x5146, [0x0cd7] = 0x51cb, [0x0cd8] = 0x558b, [0x0cd9] = 0x5bf5,
-  [0x0cda] = 0x5e16, [0x0cdb] = 0x5e33, [0x0cdc] = 0x5e81, [0x0cdd] = 0x5f14,
-  [0x0cde] = 0x5f35, [0x0cdf] = 0x5f6b, [0x0ce0] = 0x5fb4, [0x0ce1] = 0x61f2,
-  [0x0ce2] = 0x6311, [0x0ce3] = 0x66a2, [0x0ce4] = 0x671d, [0x0ce5] = 0x6f6e,
-  [0x0ce6] = 0x7252, [0x0ce7] = 0x753a, [0x0ce8] = 0x773a, [0x0ce9] = 0x8074,
-  [0x0cea] = 0x8139, [0x0ceb] = 0x8178, [0x0cec] = 0x8776, [0x0ced] = 0x8abf,
-  [0x0cee] = 0x8adc, [0x0cef] = 0x8d85, [0x0cf0] = 0x8df3, [0x0cf1] = 0x929a,
-  [0x0cf2] = 0x9577, [0x0cf3] = 0x9802, [0x0cf4] = 0x9ce5, [0x0cf5] = 0x52c5,
-  [0x0cf6] = 0x6357, [0x0cf7] = 0x76f4, [0x0cf8] = 0x6715, [0x0cf9] = 0x6c88,
-  [0x0cfa] = 0x73cd, [0x0cfb] = 0x8cc3, [0x0cfc] = 0x93ae, [0x0cfd] = 0x9673,
-  [0x0cfe] = 0x6d25, [0x0cff] = 0x589c, [0x0d00] = 0x690e, [0x0d01] = 0x69cc,
-  [0x0d02] = 0x8ffd, [0x0d03] = 0x939a, [0x0d04] = 0x75db, [0x0d05] = 0x901a,
-  [0x0d06] = 0x585a, [0x0d07] = 0x6802, [0x0d08] = 0x63b4, [0x0d09] = 0x69fb,
-  [0x0d0a] = 0x4f43, [0x0d0b] = 0x6f2c, [0x0d0c] = 0x67d8, [0x0d0d] = 0x8fbb,
-  [0x0d0e] = 0x8526, [0x0d0f] = 0x7db4, [0x0d10] = 0x9354, [0x0d11] = 0x693f,
-  [0x0d12] = 0x6f70, [0x0d13] = 0x576a, [0x0d14] = 0x58f7, [0x0d15] = 0x5b2c,
-  [0x0d16] = 0x7d2c, [0x0d17] = 0x722a, [0x0d18] = 0x540a, [0x0d19] = 0x91e3,
-  [0x0d1a] = 0x9db4, [0x0d1b] = 0x4ead, [0x0d1c] = 0x4f4e, [0x0d1d] = 0x505c,
-  [0x0d1e] = 0x5075, [0x0d1f] = 0x5243, [0x0d20] = 0x8c9e, [0x0d21] = 0x5448,
-  [0x0d22] = 0x5824, [0x0d23] = 0x5b9a, [0x0d24] = 0x5e1d, [0x0d25] = 0x5e95,
-  [0x0d26] = 0x5ead, [0x0d27] = 0x5ef7, [0x0d28] = 0x5f1f, [0x0d29] = 0x608c,
-  [0x0d2a] = 0x62b5, [0x0d2b] = 0x633a, [0x0d2c] = 0x63d0, [0x0d2d] = 0x68af,
-  [0x0d2e] = 0x6c40, [0x0d2f] = 0x7887, [0x0d30] = 0x798e, [0x0d31] = 0x7a0b,
-  [0x0d32] = 0x7de0, [0x0d33] = 0x8247, [0x0d34] = 0x8a02, [0x0d35] = 0x8ae6,
-  [0x0d36] = 0x8e44, [0x0d37] = 0x9013, [0x0d38] = 0x90b8, [0x0d39] = 0x912d,
-  [0x0d3a] = 0x91d8, [0x0d3b] = 0x9f0e, [0x0d3c] = 0x6ce5, [0x0d3d] = 0x6458,
-  [0x0d3e] = 0x64e2, [0x0d3f] = 0x6575, [0x0d40] = 0x6ef4, [0x0d41] = 0x7684,
-  [0x0d42] = 0x7b1b, [0x0d43] = 0x9069, [0x0d44] = 0x93d1, [0x0d45] = 0x6eba,
-  [0x0d46] = 0x54f2, [0x0d47] = 0x5fb9, [0x0d48] = 0x64a4, [0x0d49] = 0x8f4d,
-  [0x0d4a] = 0x8fed, [0x0d4b] = 0x9244, [0x0d4c] = 0x5178, [0x0d4d] = 0x586b,
-  [0x0d4e] = 0x5929, [0x0d4f] = 0x5c55, [0x0d50] = 0x5e97, [0x0d51] = 0x6dfb,
-  [0x0d52] = 0x7e8f, [0x0d53] = 0x751c, [0x0d54] = 0x8cbc, [0x0d55] = 0x8ee2,
-  [0x0d56] = 0x985b, [0x0d57] = 0x70b9, [0x0d58] = 0x4f1d, [0x0d59] = 0x6bbf,
-  [0x0d5a] = 0x6fb1, [0x0d5b] = 0x7530, [0x0d5c] = 0x96fb, [0x0d5d] = 0x514e,
-  [0x0d5e] = 0x5410, [0x0d5f] = 0x5835, [0x0d60] = 0x5857, [0x0d61] = 0x59ac,
-  [0x0d62] = 0x5c60, [0x0d63] = 0x5f92, [0x0d64] = 0x6597, [0x0d65] = 0x675c,
-  [0x0d66] = 0x6e21, [0x0d67] = 0x767b, [0x0d68] = 0x83df, [0x0d69] = 0x8ced,
-  [0x0d6a] = 0x9014, [0x0d6b] = 0x90fd, [0x0d6c] = 0x934d, [0x0d6d] = 0x7825,
-  [0x0d6e] = 0x783a, [0x0d6f] = 0x52aa, [0x0d70] = 0x5ea6, [0x0d71] = 0x571f,
-  [0x0d72] = 0x5974, [0x0d73] = 0x6012, [0x0d74] = 0x5012, [0x0d75] = 0x515a,
-  [0x0d76] = 0x51ac, [0x0d77] = 0x51cd, [0x0d78] = 0x5200, [0x0d79] = 0x5510,
-  [0x0d7a] = 0x5854, [0x0d7b] = 0x5858, [0x0d7c] = 0x5957, [0x0d7d] = 0x5b95,
-  [0x0d7e] = 0x5cf6, [0x0d7f] = 0x5d8b, [0x0d80] = 0x60bc, [0x0d81] = 0x6295,
-  [0x0d82] = 0x642d, [0x0d83] = 0x6771, [0x0d84] = 0x6843, [0x0d85] = 0x68bc,
-  [0x0d86] = 0x68df, [0x0d87] = 0x76d7, [0x0d88] = 0x6dd8, [0x0d89] = 0x6e6f,
-  [0x0d8a] = 0x6d9b, [0x0d8b] = 0x706f, [0x0d8c] = 0x71c8, [0x0d8d] = 0x5f53,
-  [0x0d8e] = 0x75d8, [0x0d8f] = 0x7977, [0x0d90] = 0x7b49, [0x0d91] = 0x7b54,
-  [0x0d92] = 0x7b52, [0x0d93] = 0x7cd6, [0x0d94] = 0x7d71, [0x0d95] = 0x5230,
-  [0x0d96] = 0x8463, [0x0d97] = 0x8569, [0x0d98] = 0x85e4, [0x0d99] = 0x8a0e,
-  [0x0d9a] = 0x8b04, [0x0d9b] = 0x8c46, [0x0d9c] = 0x8e0f, [0x0d9d] = 0x9003,
-  [0x0d9e] = 0x900f, [0x0d9f] = 0x9419, [0x0da0] = 0x9676, [0x0da1] = 0x982d,
-  [0x0da2] = 0x9a30, [0x0da3] = 0x95d8, [0x0da4] = 0x50cd, [0x0da5] = 0x52d5,
-  [0x0da6] = 0x540c, [0x0da7] = 0x5802, [0x0da8] = 0x5c0e, [0x0da9] = 0x61a7,
-  [0x0daa] = 0x649e, [0x0dab] = 0x6d1e, [0x0dac] = 0x77b3, [0x0dad] = 0x7ae5,
-  [0x0dae] = 0x80f4, [0x0daf] = 0x8404, [0x0db0] = 0x9053, [0x0db1] = 0x9285,
-  [0x0db2] = 0x5ce0, [0x0db3] = 0x9d07, [0x0db4] = 0x533f, [0x0db5] = 0x5f97,
-  [0x0db6] = 0x5fb3, [0x0db7] = 0x6d9c, [0x0db8] = 0x7279, [0x0db9] = 0x7763,
-  [0x0dba] = 0x79bf, [0x0dbb] = 0x7be4, [0x0dbc] = 0x6bd2, [0x0dbd] = 0x72ec,
-  [0x0dbe] = 0x8aad, [0x0dbf] = 0x6803, [0x0dc0] = 0x6a61, [0x0dc1] = 0x51f8,
-  [0x0dc2] = 0x7a81, [0x0dc3] = 0x6934, [0x0dc4] = 0x5c4a, [0x0dc5] = 0x9cf6,
-  [0x0dc6] = 0x82eb, [0x0dc7] = 0x5bc5, [0x0dc8] = 0x9149, [0x0dc9] = 0x701e,
-  [0x0dca] = 0x5678, [0x0dcb] = 0x5c6f, [0x0dcc] = 0x60c7, [0x0dcd] = 0x6566,
-  [0x0dce] = 0x6c8c, [0x0dcf] = 0x8c5a, [0x0dd0] = 0x9041, [0x0dd1] = 0x9813,
-  [0x0dd2] = 0x5451, [0x0dd3] = 0x66c7, [0x0dd4] = 0x920d, [0x0dd5] = 0x5948,
-  [0x0dd6] = 0x90a3, [0x0dd7] = 0x5185, [0x0dd8] = 0x4e4d, [0x0dd9] = 0x51ea,
-  [0x0dda] = 0x8599, [0x0ddb] = 0x8b0e, [0x0ddc] = 0x7058, [0x0ddd] = 0x637a,
-  [0x0dde] = 0x934b, [0x0ddf] = 0x6962, [0x0de0] = 0x99b4, [0x0de1] = 0x7e04,
-  [0x0de2] = 0x7577, [0x0de3] = 0x5357, [0x0de4] = 0x6960, [0x0de5] = 0x8edf,
-  [0x0de6] = 0x96e3, [0x0de7] = 0x6c5d, [0x0de8] = 0x4e8c, [0x0de9] = 0x5c3c,
-  [0x0dea] = 0x5f10, [0x0deb] = 0x8fe9, [0x0dec] = 0x5302, [0x0ded] = 0x8cd1,
-  [0x0dee] = 0x8089, [0x0def] = 0x8679, [0x0df0] = 0x5eff, [0x0df1] = 0x65e5,
-  [0x0df2] = 0x4e73, [0x0df3] = 0x5165, [0x0df4] = 0x5982, [0x0df5] = 0x5c3f,
-  [0x0df6] = 0x97ee, [0x0df7] = 0x4efb, [0x0df8] = 0x598a, [0x0df9] = 0x5fcd,
-  [0x0dfa] = 0x8a8d, [0x0dfb] = 0x6fe1, [0x0dfc] = 0x79b0, [0x0dfd] = 0x7962,
-  [0x0dfe] = 0x5be7, [0x0dff] = 0x8471, [0x0e00] = 0x732b, [0x0e01] = 0x71b1,
-  [0x0e02] = 0x5e74, [0x0e03] = 0x5ff5, [0x0e04] = 0x637b, [0x0e05] = 0x649a,
-  [0x0e06] = 0x71c3, [0x0e07] = 0x7c98, [0x0e08] = 0x4e43, [0x0e09] = 0x5efc,
-  [0x0e0a] = 0x4e4b, [0x0e0b] = 0x57dc, [0x0e0c] = 0x56a2, [0x0e0d] = 0x60a9,
-  [0x0e0e] = 0x6fc3, [0x0e0f] = 0x7d0d, [0x0e10] = 0x80fd, [0x0e11] = 0x8133,
-  [0x0e12] = 0x81bf, [0x0e13] = 0x8fb2, [0x0e14] = 0x8997, [0x0e15] = 0x86a4,
-  [0x0e16] = 0x5df4, [0x0e17] = 0x628a, [0x0e18] = 0x64ad, [0x0e19] = 0x8987,
-  [0x0e1a] = 0x6777, [0x0e1b] = 0x6ce2, [0x0e1c] = 0x6d3e, [0x0e1d] = 0x7436,
-  [0x0e1e] = 0x7834, [0x0e1f] = 0x5a46, [0x0e20] = 0x7f75, [0x0e21] = 0x82ad,
-  [0x0e22] = 0x99ac, [0x0e23] = 0x4ff3, [0x0e24] = 0x5ec3, [0x0e25] = 0x62dd,
-  [0x0e26] = 0x6392, [0x0e27] = 0x6557, [0x0e28] = 0x676f, [0x0e29] = 0x76c3,
-  [0x0e2a] = 0x724c, [0x0e2b] = 0x80cc, [0x0e2c] = 0x80ba, [0x0e2d] = 0x8f29,
-  [0x0e2e] = 0x914d, [0x0e2f] = 0x500d, [0x0e30] = 0x57f9, [0x0e31] = 0x5a92,
-  [0x0e32] = 0x6885, [0x0e33] = 0x6973, [0x0e34] = 0x7164, [0x0e35] = 0x72fd,
-  [0x0e36] = 0x8cb7, [0x0e37] = 0x58f2, [0x0e38] = 0x8ce0, [0x0e39] = 0x966a,
-  [0x0e3a] = 0x9019, [0x0e3b] = 0x877f, [0x0e3c] = 0x79e4, [0x0e3d] = 0x77e7,
-  [0x0e3e] = 0x8429, [0x0e3f] = 0x4f2f, [0x0e40] = 0x5265, [0x0e41] = 0x535a,
-  [0x0e42] = 0x62cd, [0x0e43] = 0x67cf, [0x0e44] = 0x6cca, [0x0e45] = 0x767d,
-  [0x0e46] = 0x7b94, [0x0e47] = 0x7c95, [0x0e48] = 0x8236, [0x0e49] = 0x8584,
-  [0x0e4a] = 0x8feb, [0x0e4b] = 0x66dd, [0x0e4c] = 0x6f20, [0x0e4d] = 0x7206,
-  [0x0e4e] = 0x7e1b, [0x0e4f] = 0x83ab, [0x0e50] = 0x99c1, [0x0e51] = 0x9ea6,
-  [0x0e52] = 0x51fd, [0x0e53] = 0x7bb1, [0x0e54] = 0x7872, [0x0e55] = 0x7bb8,
-  [0x0e56] = 0x8087, [0x0e57] = 0x7b48, [0x0e58] = 0x6ae8, [0x0e59] = 0x5e61,
-  [0x0e5a] = 0x808c, [0x0e5b] = 0x7551, [0x0e5c] = 0x7560, [0x0e5d] = 0x516b,
-  [0x0e5e] = 0x9262, [0x0e5f] = 0x6e8c, [0x0e60] = 0x767a, [0x0e61] = 0x9197,
-  [0x0e62] = 0x9aea, [0x0e63] = 0x4f10, [0x0e64] = 0x7f70, [0x0e65] = 0x629c,
-  [0x0e66] = 0x7b4f, [0x0e67] = 0x95a5, [0x0e68] = 0x9ce9, [0x0e69] = 0x567a,
-  [0x0e6a] = 0x5859, [0x0e6b] = 0x86e4, [0x0e6c] = 0x96bc, [0x0e6d] = 0x4f34,
-  [0x0e6e] = 0x5224, [0x0e6f] = 0x534a, [0x0e70] = 0x53cd, [0x0e71] = 0x53db,
-  [0x0e72] = 0x5e06, [0x0e73] = 0x642c, [0x0e74] = 0x6591, [0x0e75] = 0x677f,
-  [0x0e76] = 0x6c3e, [0x0e77] = 0x6c4e, [0x0e78] = 0x7248, [0x0e79] = 0x72af,
-  [0x0e7a] = 0x73ed, [0x0e7b] = 0x7554, [0x0e7c] = 0x7e41, [0x0e7d] = 0x822c,
-  [0x0e7e] = 0x85e9, [0x0e7f] = 0x8ca9, [0x0e80] = 0x7bc4, [0x0e81] = 0x91c6,
-  [0x0e82] = 0x7169, [0x0e83] = 0x9812, [0x0e84] = 0x98ef, [0x0e85] = 0x633d,
-  [0x0e86] = 0x6669, [0x0e87] = 0x756a, [0x0e88] = 0x76e4, [0x0e89] = 0x78d0,
-  [0x0e8a] = 0x8543, [0x0e8b] = 0x86ee, [0x0e8c] = 0x532a, [0x0e8d] = 0x5351,
-  [0x0e8e] = 0x5426, [0x0e8f] = 0x5983, [0x0e90] = 0x5e87, [0x0e91] = 0x5f7c,
-  [0x0e92] = 0x60b2, [0x0e93] = 0x6249, [0x0e94] = 0x6279, [0x0e95] = 0x62ab,
-  [0x0e96] = 0x6590, [0x0e97] = 0x6bd4, [0x0e98] = 0x6ccc, [0x0e99] = 0x75b2,
-  [0x0e9a] = 0x76ae, [0x0e9b] = 0x7891, [0x0e9c] = 0x79d8, [0x0e9d] = 0x7dcb,
-  [0x0e9e] = 0x7f77, [0x0e9f] = 0x80a5, [0x0ea0] = 0x88ab, [0x0ea1] = 0x8ab9,
-  [0x0ea2] = 0x8cbb, [0x0ea3] = 0x907f, [0x0ea4] = 0x975e, [0x0ea5] = 0x98db,
-  [0x0ea6] = 0x6a0b, [0x0ea7] = 0x7c38, [0x0ea8] = 0x5099, [0x0ea9] = 0x5c3e,
-  [0x0eaa] = 0x5fae, [0x0eab] = 0x6787, [0x0eac] = 0x6bd8, [0x0ead] = 0x7435,
-  [0x0eae] = 0x7709, [0x0eaf] = 0x7f8e, [0x0eb0] = 0x9f3b, [0x0eb1] = 0x67ca,
-  [0x0eb2] = 0x7a17, [0x0eb3] = 0x5339, [0x0eb4] = 0x758b, [0x0eb5] = 0x9aed,
-  [0x0eb6] = 0x5f66, [0x0eb7] = 0x819d, [0x0eb8] = 0x83f1, [0x0eb9] = 0x8098,
-  [0x0eba] = 0x5f3c, [0x0ebb] = 0x5fc5, [0x0ebc] = 0x7562, [0x0ebd] = 0x7b46,
-  [0x0ebe] = 0x903c, [0x0ebf] = 0x6867, [0x0ec0] = 0x59eb, [0x0ec1] = 0x5a9b,
-  [0x0ec2] = 0x7d10, [0x0ec3] = 0x767e, [0x0ec4] = 0x8b2c, [0x0ec5] = 0x4ff5,
-  [0x0ec6] = 0x5f6a, [0x0ec7] = 0x6a19, [0x0ec8] = 0x6c37, [0x0ec9] = 0x6f02,
-  [0x0eca] = 0x74e2, [0x0ecb] = 0x7968, [0x0ecc] = 0x8868, [0x0ecd] = 0x8a55,
-  [0x0ece] = 0x8c79, [0x0ecf] = 0x5edf, [0x0ed0] = 0x63cf, [0x0ed1] = 0x75c5,
-  [0x0ed2] = 0x79d2, [0x0ed3] = 0x82d7, [0x0ed4] = 0x9328, [0x0ed5] = 0x92f2,
-  [0x0ed6] = 0x849c, [0x0ed7] = 0x86ed, [0x0ed8] = 0x9c2d, [0x0ed9] = 0x54c1,
-  [0x0eda] = 0x5f6c, [0x0edb] = 0x658c, [0x0edc] = 0x6d5c, [0x0edd] = 0x7015,
-  [0x0ede] = 0x8ca7, [0x0edf] = 0x8cd3, [0x0ee0] = 0x983b, [0x0ee1] = 0x654f,
-  [0x0ee2] = 0x74f6, [0x0ee3] = 0x4e0d, [0x0ee4] = 0x4ed8, [0x0ee5] = 0x57e0,
-  [0x0ee6] = 0x592b, [0x0ee7] = 0x5a66, [0x0ee8] = 0x5bcc, [0x0ee9] = 0x51a8,
-  [0x0eea] = 0x5e03, [0x0eeb] = 0x5e9c, [0x0eec] = 0x6016, [0x0eed] = 0x6276,
-  [0x0eee] = 0x6577, [0x0eef] = 0x65a7, [0x0ef0] = 0x666e, [0x0ef1] = 0x6d6e,
-  [0x0ef2] = 0x7236, [0x0ef3] = 0x7b26, [0x0ef4] = 0x8150, [0x0ef5] = 0x819a,
-  [0x0ef6] = 0x8299, [0x0ef7] = 0x8b5c, [0x0ef8] = 0x8ca0, [0x0ef9] = 0x8ce6,
-  [0x0efa] = 0x8d74, [0x0efb] = 0x961c, [0x0efc] = 0x9644, [0x0efd] = 0x4fae,
-  [0x0efe] = 0x64ab, [0x0eff] = 0x6b66, [0x0f00] = 0x821e, [0x0f01] = 0x8461,
-  [0x0f02] = 0x856a, [0x0f03] = 0x90e8, [0x0f04] = 0x5c01, [0x0f05] = 0x6953,
-  [0x0f06] = 0x98a8, [0x0f07] = 0x847a, [0x0f08] = 0x8557, [0x0f09] = 0x4f0f,
-  [0x0f0a] = 0x526f, [0x0f0b] = 0x5fa9, [0x0f0c] = 0x5e45, [0x0f0d] = 0x670d,
-  [0x0f0e] = 0x798f, [0x0f0f] = 0x8179, [0x0f10] = 0x8907, [0x0f11] = 0x8986,
-  [0x0f12] = 0x6df5, [0x0f13] = 0x5f17, [0x0f14] = 0x6255, [0x0f15] = 0x6cb8,
-  [0x0f16] = 0x4ecf, [0x0f17] = 0x7269, [0x0f18] = 0x9b92, [0x0f19] = 0x5206,
-  [0x0f1a] = 0x543b, [0x0f1b] = 0x5674, [0x0f1c] = 0x58b3, [0x0f1d] = 0x61a4,
-  [0x0f1e] = 0x626e, [0x0f1f] = 0x711a, [0x0f20] = 0x596e, [0x0f21] = 0x7c89,
-  [0x0f22] = 0x7cde, [0x0f23] = 0x7d1b, [0x0f24] = 0x96f0, [0x0f25] = 0x6587,
-  [0x0f26] = 0x805e, [0x0f27] = 0x4e19, [0x0f28] = 0x4f75, [0x0f29] = 0x5175,
-  [0x0f2a] = 0x5840, [0x0f2b] = 0x5e63, [0x0f2c] = 0x5e73, [0x0f2d] = 0x5f0a,
-  [0x0f2e] = 0x67c4, [0x0f2f] = 0x4e26, [0x0f30] = 0x853d, [0x0f31] = 0x9589,
-  [0x0f32] = 0x965b, [0x0f33] = 0x7c73, [0x0f34] = 0x9801, [0x0f35] = 0x50fb,
-  [0x0f36] = 0x58c1, [0x0f37] = 0x7656, [0x0f38] = 0x78a7, [0x0f39] = 0x5225,
-  [0x0f3a] = 0x77a5, [0x0f3b] = 0x8511, [0x0f3c] = 0x7b86, [0x0f3d] = 0x504f,
-  [0x0f3e] = 0x5909, [0x0f3f] = 0x7247, [0x0f40] = 0x7bc7, [0x0f41] = 0x7de8,
-  [0x0f42] = 0x8fba, [0x0f43] = 0x8fd4, [0x0f44] = 0x904d, [0x0f45] = 0x4fbf,
-  [0x0f46] = 0x52c9, [0x0f47] = 0x5a29, [0x0f48] = 0x5f01, [0x0f49] = 0x97ad,
-  [0x0f4a] = 0x4fdd, [0x0f4b] = 0x8217, [0x0f4c] = 0x92ea, [0x0f4d] = 0x5703,
-  [0x0f4e] = 0x6355, [0x0f4f] = 0x6b69, [0x0f50] = 0x752b, [0x0f51] = 0x88dc,
-  [0x0f52] = 0x8f14, [0x0f53] = 0x7a42, [0x0f54] = 0x52df, [0x0f55] = 0x5893,
-  [0x0f56] = 0x6155, [0x0f57] = 0x620a, [0x0f58] = 0x66ae, [0x0f59] = 0x6bcd,
-  [0x0f5a] = 0x7c3f, [0x0f5b] = 0x83e9, [0x0f5c] = 0x5023, [0x0f5d] = 0x4ff8,
-  [0x0f5e] = 0x5305, [0x0f5f] = 0x5446, [0x0f60] = 0x5831, [0x0f61] = 0x5949,
-  [0x0f62] = 0x5b9d, [0x0f63] = 0x5cf0, [0x0f64] = 0x5cef, [0x0f65] = 0x5d29,
-  [0x0f66] = 0x5e96, [0x0f67] = 0x62b1, [0x0f68] = 0x6367, [0x0f69] = 0x653e,
-  [0x0f6a] = 0x65b9, [0x0f6b] = 0x670b, [0x0f6c] = 0x6cd5, [0x0f6d] = 0x6ce1,
-  [0x0f6e] = 0x70f9, [0x0f6f] = 0x7832, [0x0f70] = 0x7e2b, [0x0f71] = 0x80de,
-  [0x0f72] = 0x82b3, [0x0f73] = 0x840c, [0x0f74] = 0x84ec, [0x0f75] = 0x8702,
-  [0x0f76] = 0x8912, [0x0f77] = 0x8a2a, [0x0f78] = 0x8c4a, [0x0f79] = 0x90a6,
-  [0x0f7a] = 0x92d2, [0x0f7b] = 0x98fd, [0x0f7c] = 0x9cf3, [0x0f7d] = 0x9d6c,
-  [0x0f7e] = 0x4e4f, [0x0f7f] = 0x4ea1, [0x0f80] = 0x508d, [0x0f81] = 0x5256,
-  [0x0f82] = 0x574a, [0x0f83] = 0x59a8, [0x0f84] = 0x5e3d, [0x0f85] = 0x5fd8,
-  [0x0f86] = 0x5fd9, [0x0f87] = 0x623f, [0x0f88] = 0x66b4, [0x0f89] = 0x671b,
-  [0x0f8a] = 0x67d0, [0x0f8b] = 0x68d2, [0x0f8c] = 0x5192, [0x0f8d] = 0x7d21,
-  [0x0f8e] = 0x80aa, [0x0f8f] = 0x81a8, [0x0f90] = 0x8b00, [0x0f91] = 0x8c8c,
-  [0x0f92] = 0x8cbf, [0x0f93] = 0x927e, [0x0f94] = 0x9632, [0x0f95] = 0x5420,
-  [0x0f96] = 0x982c, [0x0f97] = 0x5317, [0x0f98] = 0x50d5, [0x0f99] = 0x535c,
-  [0x0f9a] = 0x58a8, [0x0f9b] = 0x64b2, [0x0f9c] = 0x6734, [0x0f9d] = 0x7267,
-  [0x0f9e] = 0x7766, [0x0f9f] = 0x7a46, [0x0fa0] = 0x91e6, [0x0fa1] = 0x52c3,
-  [0x0fa2] = 0x6ca1, [0x0fa3] = 0x6b86, [0x0fa4] = 0x5800, [0x0fa5] = 0x5e4c,
-  [0x0fa6] = 0x5954, [0x0fa7] = 0x672c, [0x0fa8] = 0x7ffb, [0x0fa9] = 0x51e1,
-  [0x0faa] = 0x76c6, [0x0fab] = 0x6469, [0x0fac] = 0x78e8, [0x0fad] = 0x9b54,
-  [0x0fae] = 0x9ebb, [0x0faf] = 0x57cb, [0x0fb0] = 0x59b9, [0x0fb1] = 0x6627,
-  [0x0fb2] = 0x679a, [0x0fb3] = 0x6bce, [0x0fb4] = 0x54e9, [0x0fb5] = 0x69d9,
-  [0x0fb6] = 0x5e55, [0x0fb7] = 0x819c, [0x0fb8] = 0x6795, [0x0fb9] = 0x9baa,
-  [0x0fba] = 0x67fe, [0x0fbb] = 0x9c52, [0x0fbc] = 0x685d, [0x0fbd] = 0x4ea6,
-  [0x0fbe] = 0x4fe3, [0x0fbf] = 0x53c8, [0x0fc0] = 0x62b9, [0x0fc1] = 0x672b,
-  [0x0fc2] = 0x6cab, [0x0fc3] = 0x8fc4, [0x0fc4] = 0x4fad, [0x0fc5] = 0x7e6d,
-  [0x0fc6] = 0x9ebf, [0x0fc7] = 0x4e07, [0x0fc8] = 0x6162, [0x0fc9] = 0x6e80,
-  [0x0fca] = 0x6f2b, [0x0fcb] = 0x8513, [0x0fcc] = 0x5473, [0x0fcd] = 0x672a,
-  [0x0fce] = 0x9b45, [0x0fcf] = 0x5df3, [0x0fd0] = 0x7b95, [0x0fd1] = 0x5cac,
-  [0x0fd2] = 0x5bc6, [0x0fd3] = 0x871c, [0x0fd4] = 0x6e4a, [0x0fd5] = 0x84d1,
-  [0x0fd6] = 0x7a14, [0x0fd7] = 0x8108, [0x0fd8] = 0x5999, [0x0fd9] = 0x7c8d,
-  [0x0fda] = 0x6c11, [0x0fdb] = 0x7720, [0x0fdc] = 0x52d9, [0x0fdd] = 0x5922,
-  [0x0fde] = 0x7121, [0x0fdf] = 0x725f, [0x0fe0] = 0x77db, [0x0fe1] = 0x9727,
-  [0x0fe2] = 0x9d61, [0x0fe3] = 0x690b, [0x0fe4] = 0x5a7f, [0x0fe5] = 0x5a18,
-  [0x0fe6] = 0x51a5, [0x0fe7] = 0x540d, [0x0fe8] = 0x547d, [0x0fe9] = 0x660e,
-  [0x0fea] = 0x76df, [0x0feb] = 0x8ff7, [0x0fec] = 0x9298, [0x0fed] = 0x9cf4,
-  [0x0fee] = 0x59ea, [0x0fef] = 0x725d, [0x0ff0] = 0x6ec5, [0x0ff1] = 0x514d,
-  [0x0ff2] = 0x68c9, [0x0ff3] = 0x7dbf, [0x0ff4] = 0x7dec, [0x0ff5] = 0x9762,
-  [0x0ff6] = 0x9eba, [0x0ff7] = 0x6478, [0x0ff8] = 0x6a21, [0x0ff9] = 0x8302,
-  [0x0ffa] = 0x5984, [0x0ffb] = 0x5b5f, [0x0ffc] = 0x6bdb, [0x0ffd] = 0x731b,
-  [0x0ffe] = 0x76f2, [0x0fff] = 0x7db2, [0x1000] = 0x8017, [0x1001] = 0x8499,
-  [0x1002] = 0x5132, [0x1003] = 0x6728, [0x1004] = 0x9ed9, [0x1005] = 0x76ee,
-  [0x1006] = 0x6762, [0x1007] = 0x52ff, [0x1008] = 0x9905, [0x1009] = 0x5c24,
-  [0x100a] = 0x623b, [0x100b] = 0x7c7e, [0x100c] = 0x8cb0, [0x100d] = 0x554f,
-  [0x100e] = 0x60b6, [0x100f] = 0x7d0b, [0x1010] = 0x9580, [0x1011] = 0x5301,
-  [0x1012] = 0x4e5f, [0x1013] = 0x51b6, [0x1014] = 0x591c, [0x1015] = 0x723a,
-  [0x1016] = 0x8036, [0x1017] = 0x91ce, [0x1018] = 0x5f25, [0x1019] = 0x77e2,
-  [0x101a] = 0x5384, [0x101b] = 0x5f79, [0x101c] = 0x7d04, [0x101d] = 0x85ac,
-  [0x101e] = 0x8a33, [0x101f] = 0x8e8d, [0x1020] = 0x9756, [0x1021] = 0x67f3,
-  [0x1022] = 0x85ae, [0x1023] = 0x9453, [0x1024] = 0x6109, [0x1025] = 0x6108,
-  [0x1026] = 0x6cb9, [0x1027] = 0x7652, [0x1028] = 0x8aed, [0x1029] = 0x8f38,
-  [0x102a] = 0x552f, [0x102b] = 0x4f51, [0x102c] = 0x512a, [0x102d] = 0x52c7,
-  [0x102e] = 0x53cb, [0x102f] = 0x5ba5, [0x1030] = 0x5e7d, [0x1031] = 0x60a0,
-  [0x1032] = 0x6182, [0x1033] = 0x63d6, [0x1034] = 0x6709, [0x1035] = 0x67da,
-  [0x1036] = 0x6e67, [0x1037] = 0x6d8c, [0x1038] = 0x7336, [0x1039] = 0x7337,
-  [0x103a] = 0x7531, [0x103b] = 0x7950, [0x103c] = 0x88d5, [0x103d] = 0x8a98,
-  [0x103e] = 0x904a, [0x103f] = 0x9091, [0x1040] = 0x90f5, [0x1041] = 0x96c4,
-  [0x1042] = 0x878d, [0x1043] = 0x5915, [0x1044] = 0x4e88, [0x1045] = 0x4f59,
-  [0x1046] = 0x4e0e, [0x1047] = 0x8a89, [0x1048] = 0x8f3f, [0x1049] = 0x9810,
-  [0x104a] = 0x50ad, [0x104b] = 0x5e7c, [0x104c] = 0x5996, [0x104d] = 0x5bb9,
-  [0x104e] = 0x5eb8, [0x104f] = 0x63da, [0x1050] = 0x63fa, [0x1051] = 0x64c1,
-  [0x1052] = 0x66dc, [0x1053] = 0x694a, [0x1054] = 0x69d8, [0x1055] = 0x6d0b,
-  [0x1056] = 0x6eb6, [0x1057] = 0x7194, [0x1058] = 0x7528, [0x1059] = 0x7aaf,
-  [0x105a] = 0x7f8a, [0x105b] = 0x8000, [0x105c] = 0x8449, [0x105d] = 0x84c9,
-  [0x105e] = 0x8981, [0x105f] = 0x8b21, [0x1060] = 0x8e0a, [0x1061] = 0x9065,
-  [0x1062] = 0x967d, [0x1063] = 0x990a, [0x1064] = 0x617e, [0x1065] = 0x6291,
-  [0x1066] = 0x6b32, [0x1067] = 0x6c83, [0x1068] = 0x6d74, [0x1069] = 0x7fcc,
-  [0x106a] = 0x7ffc, [0x106b] = 0x6dc0, [0x106c] = 0x7f85, [0x106d] = 0x87ba,
-  [0x106e] = 0x88f8, [0x106f] = 0x6765, [0x1070] = 0x83b1, [0x1071] = 0x983c,
-  [0x1072] = 0x96f7, [0x1073] = 0x6d1b, [0x1074] = 0x7d61, [0x1075] = 0x843d,
-  [0x1076] = 0x916a, [0x1077] = 0x4e71, [0x1078] = 0x5375, [0x1079] = 0x5d50,
-  [0x107a] = 0x6b04, [0x107b] = 0x6feb, [0x107c] = 0x85cd, [0x107d] = 0x862d,
-  [0x107e] = 0x89a7, [0x107f] = 0x5229, [0x1080] = 0x540f, [0x1081] = 0x5c65,
-  [0x1082] = 0x674e, [0x1083] = 0x68a8, [0x1084] = 0x7406, [0x1085] = 0x7483,
-  [0x1086] = 0x75e2, [0x1087] = 0x88cf, [0x1088] = 0x88e1, [0x1089] = 0x91cc,
-  [0x108a] = 0x96e2, [0x108b] = 0x9678, [0x108c] = 0x5f8b, [0x108d] = 0x7387,
-  [0x108e] = 0x7acb, [0x108f] = 0x844e, [0x1090] = 0x63a0, [0x1091] = 0x7565,
-  [0x1092] = 0x5289, [0x1093] = 0x6d41, [0x1094] = 0x6e9c, [0x1095] = 0x7409,
-  [0x1096] = 0x7559, [0x1097] = 0x786b, [0x1098] = 0x7c92, [0x1099] = 0x9686,
-  [0x109a] = 0x7adc, [0x109b] = 0x9f8d, [0x109c] = 0x4fb6, [0x109d] = 0x616e,
-  [0x109e] = 0x65c5, [0x109f] = 0x865c, [0x10a0] = 0x4e86, [0x10a1] = 0x4eae,
-  [0x10a2] = 0x50da, [0x10a3] = 0x4e21, [0x10a4] = 0x51cc, [0x10a5] = 0x5bee,
-  [0x10a6] = 0x6599, [0x10a7] = 0x6881, [0x10a8] = 0x6dbc, [0x10a9] = 0x731f,
-  [0x10aa] = 0x7642, [0x10ab] = 0x77ad, [0x10ac] = 0x7a1c, [0x10ad] = 0x7ce7,
-  [0x10ae] = 0x826f, [0x10af] = 0x8ad2, [0x10b0] = 0x907c, [0x10b1] = 0x91cf,
-  [0x10b2] = 0x9675, [0x10b3] = 0x9818, [0x10b4] = 0x529b, [0x10b5] = 0x7dd1,
-  [0x10b6] = 0x502b, [0x10b7] = 0x5398, [0x10b8] = 0x6797, [0x10b9] = 0x6dcb,
-  [0x10ba] = 0x71d0, [0x10bb] = 0x7433, [0x10bc] = 0x81e8, [0x10bd] = 0x8f2a,
-  [0x10be] = 0x96a3, [0x10bf] = 0x9c57, [0x10c0] = 0x9e9f, [0x10c1] = 0x7460,
-  [0x10c2] = 0x5841, [0x10c3] = 0x6d99, [0x10c4] = 0x7d2f, [0x10c5] = 0x985e,
-  [0x10c6] = 0x4ee4, [0x10c7] = 0x4f36, [0x10c8] = 0x4f8b, [0x10c9] = 0x51b7,
-  [0x10ca] = 0x52b1, [0x10cb] = 0x5dba, [0x10cc] = 0x601c, [0x10cd] = 0x73b2,
-  [0x10ce] = 0x793c, [0x10cf] = 0x82d3, [0x10d0] = 0x9234, [0x10d1] = 0x96b7,
-  [0x10d2] = 0x96f6, [0x10d3] = 0x970a, [0x10d4] = 0x9e97, [0x10d5] = 0x9f62,
-  [0x10d6] = 0x66a6, [0x10d7] = 0x6b74, [0x10d8] = 0x5217, [0x10d9] = 0x52a3,
-  [0x10da] = 0x70c8, [0x10db] = 0x88c2, [0x10dc] = 0x5ec9, [0x10dd] = 0x604b,
-  [0x10de] = 0x6190, [0x10df] = 0x6f23, [0x10e0] = 0x7149, [0x10e1] = 0x7c3e,
-  [0x10e2] = 0x7df4, [0x10e3] = 0x806f, [0x10e4] = 0x84ee, [0x10e5] = 0x9023,
-  [0x10e6] = 0x932c, [0x10e7] = 0x5442, [0x10e8] = 0x9b6f, [0x10e9] = 0x6ad3,
-  [0x10ea] = 0x7089, [0x10eb] = 0x8cc2, [0x10ec] = 0x8def, [0x10ed] = 0x9732,
-  [0x10ee] = 0x52b4, [0x10ef] = 0x5a41, [0x10f0] = 0x5eca, [0x10f1] = 0x5f04,
-  [0x10f2] = 0x6717, [0x10f3] = 0x697c, [0x10f4] = 0x6994, [0x10f5] = 0x6d6a,
-  [0x10f6] = 0x6f0f, [0x10f7] = 0x7262, [0x10f8] = 0x72fc, [0x10f9] = 0x7bed,
-  [0x10fa] = 0x8001, [0x10fb] = 0x807e, [0x10fc] = 0x874b, [0x10fd] = 0x90ce,
-  [0x10fe] = 0x516d, [0x10ff] = 0x9e93, [0x1100] = 0x7984, [0x1101] = 0x808b,
-  [0x1102] = 0x9332, [0x1103] = 0x8ad6, [0x1104] = 0x502d, [0x1105] = 0x548c,
-  [0x1106] = 0x8a71, [0x1107] = 0x6b6a, [0x1108] = 0x8cc4, [0x1109] = 0x8107,
-  [0x110a] = 0x60d1, [0x110b] = 0x67a0, [0x110c] = 0x9df2, [0x110d] = 0x4e99,
-  [0x110e] = 0x4e98, [0x110f] = 0x9c10, [0x1110] = 0x8a6b, [0x1111] = 0x85c1,
-  [0x1112] = 0x8568, [0x1113] = 0x6900, [0x1114] = 0x6e7e, [0x1115] = 0x7897,
-  [0x1116] = 0x8155, [0x1142] = 0x5f0c, [0x1143] = 0x4e10, [0x1144] = 0x4e15,
-  [0x1145] = 0x4e2a, [0x1146] = 0x4e31, [0x1147] = 0x4e36, [0x1148] = 0x4e3c,
-  [0x1149] = 0x4e3f, [0x114a] = 0x4e42, [0x114b] = 0x4e56, [0x114c] = 0x4e58,
-  [0x114d] = 0x4e82, [0x114e] = 0x4e85, [0x114f] = 0x8c6b, [0x1150] = 0x4e8a,
-  [0x1151] = 0x8212, [0x1152] = 0x5f0d, [0x1153] = 0x4e8e, [0x1154] = 0x4e9e,
-  [0x1155] = 0x4e9f, [0x1156] = 0x4ea0, [0x1157] = 0x4ea2, [0x1158] = 0x4eb0,
-  [0x1159] = 0x4eb3, [0x115a] = 0x4eb6, [0x115b] = 0x4ece, [0x115c] = 0x4ecd,
-  [0x115d] = 0x4ec4, [0x115e] = 0x4ec6, [0x115f] = 0x4ec2, [0x1160] = 0x4ed7,
-  [0x1161] = 0x4ede, [0x1162] = 0x4eed, [0x1163] = 0x4edf, [0x1164] = 0x4ef7,
-  [0x1165] = 0x4f09, [0x1166] = 0x4f5a, [0x1167] = 0x4f30, [0x1168] = 0x4f5b,
-  [0x1169] = 0x4f5d, [0x116a] = 0x4f57, [0x116b] = 0x4f47, [0x116c] = 0x4f76,
-  [0x116d] = 0x4f88, [0x116e] = 0x4f8f, [0x116f] = 0x4f98, [0x1170] = 0x4f7b,
-  [0x1171] = 0x4f69, [0x1172] = 0x4f70, [0x1173] = 0x4f91, [0x1174] = 0x4f6f,
-  [0x1175] = 0x4f86, [0x1176] = 0x4f96, [0x1177] = 0x5118, [0x1178] = 0x4fd4,
-  [0x1179] = 0x4fdf, [0x117a] = 0x4fce, [0x117b] = 0x4fd8, [0x117c] = 0x4fdb,
-  [0x117d] = 0x4fd1, [0x117e] = 0x4fda, [0x117f] = 0x4fd0, [0x1180] = 0x4fe4,
-  [0x1181] = 0x4fe5, [0x1182] = 0x501a, [0x1183] = 0x5028, [0x1184] = 0x5014,
-  [0x1185] = 0x502a, [0x1186] = 0x5025, [0x1187] = 0x5005, [0x1188] = 0x4f1c,
-  [0x1189] = 0x4ff6, [0x118a] = 0x5021, [0x118b] = 0x5029, [0x118c] = 0x502c,
-  [0x118d] = 0x4ffe, [0x118e] = 0x4fef, [0x118f] = 0x5011, [0x1190] = 0x5006,
-  [0x1191] = 0x5043, [0x1192] = 0x5047, [0x1193] = 0x6703, [0x1194] = 0x5055,
-  [0x1195] = 0x5050, [0x1196] = 0x5048, [0x1197] = 0x505a, [0x1198] = 0x5056,
-  [0x1199] = 0x506c, [0x119a] = 0x5078, [0x119b] = 0x5080, [0x119c] = 0x509a,
-  [0x119d] = 0x5085, [0x119e] = 0x50b4, [0x119f] = 0x50b2, [0x11a0] = 0x50c9,
-  [0x11a1] = 0x50ca, [0x11a2] = 0x50b3, [0x11a3] = 0x50c2, [0x11a4] = 0x50d6,
-  [0x11a5] = 0x50de, [0x11a6] = 0x50e5, [0x11a7] = 0x50ed, [0x11a8] = 0x50e3,
-  [0x11a9] = 0x50ee, [0x11aa] = 0x50f9, [0x11ab] = 0x50f5, [0x11ac] = 0x5109,
-  [0x11ad] = 0x5101, [0x11ae] = 0x5102, [0x11af] = 0x5116, [0x11b0] = 0x5115,
-  [0x11b1] = 0x5114, [0x11b2] = 0x511a, [0x11b3] = 0x5121, [0x11b4] = 0x513a,
-  [0x11b5] = 0x5137, [0x11b6] = 0x513c, [0x11b7] = 0x513b, [0x11b8] = 0x513f,
-  [0x11b9] = 0x5140, [0x11ba] = 0x5152, [0x11bb] = 0x514c, [0x11bc] = 0x5154,
-  [0x11bd] = 0x5162, [0x11be] = 0x7af8, [0x11bf] = 0x5169, [0x11c0] = 0x516a,
-  [0x11c1] = 0x516e, [0x11c2] = 0x5180, [0x11c3] = 0x5182, [0x11c4] = 0x56d8,
-  [0x11c5] = 0x518c, [0x11c6] = 0x5189, [0x11c7] = 0x518f, [0x11c8] = 0x5191,
-  [0x11c9] = 0x5193, [0x11ca] = 0x5195, [0x11cb] = 0x5196, [0x11cc] = 0x51a4,
-  [0x11cd] = 0x51a6, [0x11ce] = 0x51a2, [0x11cf] = 0x51a9, [0x11d0] = 0x51aa,
-  [0x11d1] = 0x51ab, [0x11d2] = 0x51b3, [0x11d3] = 0x51b1, [0x11d4] = 0x51b2,
-  [0x11d5] = 0x51b0, [0x11d6] = 0x51b5, [0x11d7] = 0x51bd, [0x11d8] = 0x51c5,
-  [0x11d9] = 0x51c9, [0x11da] = 0x51db, [0x11db] = 0x51e0, [0x11dc] = 0x8655,
-  [0x11dd] = 0x51e9, [0x11de] = 0x51ed, [0x11df] = 0x51f0, [0x11e0] = 0x51f5,
-  [0x11e1] = 0x51fe, [0x11e2] = 0x5204, [0x11e3] = 0x520b, [0x11e4] = 0x5214,
-  [0x11e5] = 0x520e, [0x11e6] = 0x5227, [0x11e7] = 0x522a, [0x11e8] = 0x522e,
-  [0x11e9] = 0x5233, [0x11ea] = 0x5239, [0x11eb] = 0x524f, [0x11ec] = 0x5244,
-  [0x11ed] = 0x524b, [0x11ee] = 0x524c, [0x11ef] = 0x525e, [0x11f0] = 0x5254,
-  [0x11f1] = 0x526a, [0x11f2] = 0x5274, [0x11f3] = 0x5269, [0x11f4] = 0x5273,
-  [0x11f5] = 0x527f, [0x11f6] = 0x527d, [0x11f7] = 0x528d, [0x11f8] = 0x5294,
-  [0x11f9] = 0x5292, [0x11fa] = 0x5271, [0x11fb] = 0x5288, [0x11fc] = 0x5291,
-  [0x11fd] = 0x8fa8, [0x11fe] = 0x8fa7, [0x11ff] = 0x52ac, [0x1200] = 0x52ad,
-  [0x1201] = 0x52bc, [0x1202] = 0x52b5, [0x1203] = 0x52c1, [0x1204] = 0x52cd,
-  [0x1205] = 0x52d7, [0x1206] = 0x52de, [0x1207] = 0x52e3, [0x1208] = 0x52e6,
-  [0x1209] = 0x98ed, [0x120a] = 0x52e0, [0x120b] = 0x52f3, [0x120c] = 0x52f5,
-  [0x120d] = 0x52f8, [0x120e] = 0x52f9, [0x120f] = 0x5306, [0x1210] = 0x5308,
-  [0x1211] = 0x7538, [0x1212] = 0x530d, [0x1213] = 0x5310, [0x1214] = 0x530f,
-  [0x1215] = 0x5315, [0x1216] = 0x531a, [0x1217] = 0x5323, [0x1218] = 0x532f,
-  [0x1219] = 0x5331, [0x121a] = 0x5333, [0x121b] = 0x5338, [0x121c] = 0x5340,
-  [0x121d] = 0x5346, [0x121e] = 0x5345, [0x121f] = 0x4e17, [0x1220] = 0x5349,
-  [0x1221] = 0x534d, [0x1222] = 0x51d6, [0x1223] = 0x535e, [0x1224] = 0x5369,
-  [0x1225] = 0x536e, [0x1226] = 0x5918, [0x1227] = 0x537b, [0x1228] = 0x5377,
-  [0x1229] = 0x5382, [0x122a] = 0x5396, [0x122b] = 0x53a0, [0x122c] = 0x53a6,
-  [0x122d] = 0x53a5, [0x122e] = 0x53ae, [0x122f] = 0x53b0, [0x1230] = 0x53b6,
-  [0x1231] = 0x53c3, [0x1232] = 0x7c12, [0x1233] = 0x96d9, [0x1234] = 0x53df,
-  [0x1235] = 0x66fc, [0x1236] = 0x71ee, [0x1237] = 0x53ee, [0x1238] = 0x53e8,
-  [0x1239] = 0x53ed, [0x123a] = 0x53fa, [0x123b] = 0x5401, [0x123c] = 0x543d,
-  [0x123d] = 0x5440, [0x123e] = 0x542c, [0x123f] = 0x542d, [0x1240] = 0x543c,
-  [0x1241] = 0x542e, [0x1242] = 0x5436, [0x1243] = 0x5429, [0x1244] = 0x541d,
-  [0x1245] = 0x544e, [0x1246] = 0x548f, [0x1247] = 0x5475, [0x1248] = 0x548e,
-  [0x1249] = 0x545f, [0x124a] = 0x5471, [0x124b] = 0x5477, [0x124c] = 0x5470,
-  [0x124d] = 0x5492, [0x124e] = 0x547b, [0x124f] = 0x5480, [0x1250] = 0x5476,
-  [0x1251] = 0x5484, [0x1252] = 0x5490, [0x1253] = 0x5486, [0x1254] = 0x54c7,
-  [0x1255] = 0x54a2, [0x1256] = 0x54b8, [0x1257] = 0x54a5, [0x1258] = 0x54ac,
-  [0x1259] = 0x54c4, [0x125a] = 0x54c8, [0x125b] = 0x54a8, [0x125c] = 0x54ab,
-  [0x125d] = 0x54c2, [0x125e] = 0x54a4, [0x125f] = 0x54be, [0x1260] = 0x54bc,
-  [0x1261] = 0x54d8, [0x1262] = 0x54e5, [0x1263] = 0x54e6, [0x1264] = 0x550f,
-  [0x1265] = 0x5514, [0x1266] = 0x54fd, [0x1267] = 0x54ee, [0x1268] = 0x54ed,
-  [0x1269] = 0x54fa, [0x126a] = 0x54e2, [0x126b] = 0x5539, [0x126c] = 0x5540,
-  [0x126d] = 0x5563, [0x126e] = 0x554c, [0x126f] = 0x552e, [0x1270] = 0x555c,
-  [0x1271] = 0x5545, [0x1272] = 0x5556, [0x1273] = 0x5557, [0x1274] = 0x5538,
-  [0x1275] = 0x5533, [0x1276] = 0x555d, [0x1277] = 0x5599, [0x1278] = 0x5580,
-  [0x1279] = 0x54af, [0x127a] = 0x558a, [0x127b] = 0x559f, [0x127c] = 0x557b,
-  [0x127d] = 0x557e, [0x127e] = 0x5598, [0x127f] = 0x559e, [0x1280] = 0x55ae,
-  [0x1281] = 0x557c, [0x1282] = 0x5583, [0x1283] = 0x55a9, [0x1284] = 0x5587,
-  [0x1285] = 0x55a8, [0x1286] = 0x55da, [0x1287] = 0x55c5, [0x1288] = 0x55df,
-  [0x1289] = 0x55c4, [0x128a] = 0x55dc, [0x128b] = 0x55e4, [0x128c] = 0x55d4,
-  [0x128d] = 0x5614, [0x128e] = 0x55f7, [0x128f] = 0x5616, [0x1290] = 0x55fe,
-  [0x1291] = 0x55fd, [0x1292] = 0x561b, [0x1293] = 0x55f9, [0x1294] = 0x564e,
-  [0x1295] = 0x5650, [0x1296] = 0x71df, [0x1297] = 0x5634, [0x1298] = 0x5636,
-  [0x1299] = 0x5632, [0x129a] = 0x5638, [0x129b] = 0x566b, [0x129c] = 0x5664,
-  [0x129d] = 0x562f, [0x129e] = 0x566c, [0x129f] = 0x566a, [0x12a0] = 0x5686,
-  [0x12a1] = 0x5680, [0x12a2] = 0x568a, [0x12a3] = 0x56a0, [0x12a4] = 0x5694,
-  [0x12a5] = 0x568f, [0x12a6] = 0x56a5, [0x12a7] = 0x56ae, [0x12a8] = 0x56b6,
-  [0x12a9] = 0x56b4, [0x12aa] = 0x56c2, [0x12ab] = 0x56bc, [0x12ac] = 0x56c1,
-  [0x12ad] = 0x56c3, [0x12ae] = 0x56c0, [0x12af] = 0x56c8, [0x12b0] = 0x56ce,
-  [0x12b1] = 0x56d1, [0x12b2] = 0x56d3, [0x12b3] = 0x56d7, [0x12b4] = 0x56ee,
-  [0x12b5] = 0x56f9, [0x12b6] = 0x5700, [0x12b7] = 0x56ff, [0x12b8] = 0x5704,
-  [0x12b9] = 0x5709, [0x12ba] = 0x5708, [0x12bb] = 0x570b, [0x12bc] = 0x570d,
-  [0x12bd] = 0x5713, [0x12be] = 0x5718, [0x12bf] = 0x5716, [0x12c0] = 0x55c7,
-  [0x12c1] = 0x571c, [0x12c2] = 0x5726, [0x12c3] = 0x5737, [0x12c4] = 0x5738,
-  [0x12c5] = 0x574e, [0x12c6] = 0x573b, [0x12c7] = 0x5740, [0x12c8] = 0x574f,
-  [0x12c9] = 0x5769, [0x12ca] = 0x57c0, [0x12cb] = 0x5788, [0x12cc] = 0x5761,
-  [0x12cd] = 0x577f, [0x12ce] = 0x5789, [0x12cf] = 0x5793, [0x12d0] = 0x57a0,
-  [0x12d1] = 0x57b3, [0x12d2] = 0x57a4, [0x12d3] = 0x57aa, [0x12d4] = 0x57b0,
-  [0x12d5] = 0x57c3, [0x12d6] = 0x57c6, [0x12d7] = 0x57d4, [0x12d8] = 0x57d2,
-  [0x12d9] = 0x57d3, [0x12da] = 0x580a, [0x12db] = 0x57d6, [0x12dc] = 0x57e3,
-  [0x12dd] = 0x580b, [0x12de] = 0x5819, [0x12df] = 0x581d, [0x12e0] = 0x5872,
-  [0x12e1] = 0x5821, [0x12e2] = 0x5862, [0x12e3] = 0x584b, [0x12e4] = 0x5870,
-  [0x12e5] = 0x6bc0, [0x12e6] = 0x5852, [0x12e7] = 0x583d, [0x12e8] = 0x5879,
-  [0x12e9] = 0x5885, [0x12ea] = 0x58b9, [0x12eb] = 0x589f, [0x12ec] = 0x58ab,
-  [0x12ed] = 0x58ba, [0x12ee] = 0x58de, [0x12ef] = 0x58bb, [0x12f0] = 0x58b8,
-  [0x12f1] = 0x58ae, [0x12f2] = 0x58c5, [0x12f3] = 0x58d3, [0x12f4] = 0x58d1,
-  [0x12f5] = 0x58d7, [0x12f6] = 0x58d9, [0x12f7] = 0x58d8, [0x12f8] = 0x58e5,
-  [0x12f9] = 0x58dc, [0x12fa] = 0x58e4, [0x12fb] = 0x58df, [0x12fc] = 0x58ef,
-  [0x12fd] = 0x58fa, [0x12fe] = 0x58f9, [0x12ff] = 0x58fb, [0x1300] = 0x58fc,
-  [0x1301] = 0x58fd, [0x1302] = 0x5902, [0x1303] = 0x590a, [0x1304] = 0x5910,
-  [0x1305] = 0x591b, [0x1306] = 0x68a6, [0x1307] = 0x5925, [0x1308] = 0x592c,
-  [0x1309] = 0x592d, [0x130a] = 0x5932, [0x130b] = 0x5938, [0x130c] = 0x593e,
-  [0x130d] = 0x7ad2, [0x130e] = 0x5955, [0x130f] = 0x5950, [0x1310] = 0x594e,
-  [0x1311] = 0x595a, [0x1312] = 0x5958, [0x1313] = 0x5962, [0x1314] = 0x5960,
-  [0x1315] = 0x5967, [0x1316] = 0x596c, [0x1317] = 0x5969, [0x1318] = 0x5978,
-  [0x1319] = 0x5981, [0x131a] = 0x599d, [0x131b] = 0x4f5e, [0x131c] = 0x4fab,
-  [0x131d] = 0x59a3, [0x131e] = 0x59b2, [0x131f] = 0x59c6, [0x1320] = 0x59e8,
-  [0x1321] = 0x59dc, [0x1322] = 0x598d, [0x1323] = 0x59d9, [0x1324] = 0x59da,
-  [0x1325] = 0x5a25, [0x1326] = 0x5a1f, [0x1327] = 0x5a11, [0x1328] = 0x5a1c,
-  [0x1329] = 0x5a09, [0x132a] = 0x5a1a, [0x132b] = 0x5a40, [0x132c] = 0x5a6c,
-  [0x132d] = 0x5a49, [0x132e] = 0x5a35, [0x132f] = 0x5a36, [0x1330] = 0x5a62,
-  [0x1331] = 0x5a6a, [0x1332] = 0x5a9a, [0x1333] = 0x5abc, [0x1334] = 0x5abe,
-  [0x1335] = 0x5acb, [0x1336] = 0x5ac2, [0x1337] = 0x5abd, [0x1338] = 0x5ae3,
-  [0x1339] = 0x5ad7, [0x133a] = 0x5ae6, [0x133b] = 0x5ae9, [0x133c] = 0x5ad6,
-  [0x133d] = 0x5afa, [0x133e] = 0x5afb, [0x133f] = 0x5b0c, [0x1340] = 0x5b0b,
-  [0x1341] = 0x5b16, [0x1342] = 0x5b32, [0x1343] = 0x5ad0, [0x1344] = 0x5b2a,
-  [0x1345] = 0x5b36, [0x1346] = 0x5b3e, [0x1347] = 0x5b43, [0x1348] = 0x5b45,
-  [0x1349] = 0x5b40, [0x134a] = 0x5b51, [0x134b] = 0x5b55, [0x134c] = 0x5b5a,
-  [0x134d] = 0x5b5b, [0x134e] = 0x5b65, [0x134f] = 0x5b69, [0x1350] = 0x5b70,
-  [0x1351] = 0x5b73, [0x1352] = 0x5b75, [0x1353] = 0x5b78, [0x1354] = 0x6588,
-  [0x1355] = 0x5b7a, [0x1356] = 0x5b80, [0x1357] = 0x5b83, [0x1358] = 0x5ba6,
-  [0x1359] = 0x5bb8, [0x135a] = 0x5bc3, [0x135b] = 0x5bc7, [0x135c] = 0x5bc9,
-  [0x135d] = 0x5bd4, [0x135e] = 0x5bd0, [0x135f] = 0x5be4, [0x1360] = 0x5be6,
-  [0x1361] = 0x5be2, [0x1362] = 0x5bde, [0x1363] = 0x5be5, [0x1364] = 0x5beb,
-  [0x1365] = 0x5bf0, [0x1366] = 0x5bf6, [0x1367] = 0x5bf3, [0x1368] = 0x5c05,
-  [0x1369] = 0x5c07, [0x136a] = 0x5c08, [0x136b] = 0x5c0d, [0x136c] = 0x5c13,
-  [0x136d] = 0x5c20, [0x136e] = 0x5c22, [0x136f] = 0x5c28, [0x1370] = 0x5c38,
-  [0x1371] = 0x5c39, [0x1372] = 0x5c41, [0x1373] = 0x5c46, [0x1374] = 0x5c4e,
-  [0x1375] = 0x5c53, [0x1376] = 0x5c50, [0x1377] = 0x5c4f, [0x1378] = 0x5b71,
-  [0x1379] = 0x5c6c, [0x137a] = 0x5c6e, [0x137b] = 0x4e62, [0x137c] = 0x5c76,
-  [0x137d] = 0x5c79, [0x137e] = 0x5c8c, [0x137f] = 0x5c91, [0x1380] = 0x5c94,
-  [0x1381] = 0x599b, [0x1382] = 0x5cab, [0x1383] = 0x5cbb, [0x1384] = 0x5cb6,
-  [0x1385] = 0x5cbc, [0x1386] = 0x5cb7, [0x1387] = 0x5cc5, [0x1388] = 0x5cbe,
-  [0x1389] = 0x5cc7, [0x138a] = 0x5cd9, [0x138b] = 0x5ce9, [0x138c] = 0x5cfd,
-  [0x138d] = 0x5cfa, [0x138e] = 0x5ced, [0x138f] = 0x5d8c, [0x1390] = 0x5cea,
-  [0x1391] = 0x5d0b, [0x1392] = 0x5d15, [0x1393] = 0x5d17, [0x1394] = 0x5d5c,
-  [0x1395] = 0x5d1f, [0x1396] = 0x5d1b, [0x1397] = 0x5d11, [0x1398] = 0x5d14,
-  [0x1399] = 0x5d22, [0x139a] = 0x5d1a, [0x139b] = 0x5d19, [0x139c] = 0x5d18,
-  [0x139d] = 0x5d4c, [0x139e] = 0x5d52, [0x139f] = 0x5d4e, [0x13a0] = 0x5d4b,
-  [0x13a1] = 0x5d6c, [0x13a2] = 0x5d73, [0x13a3] = 0x5d76, [0x13a4] = 0x5d87,
-  [0x13a5] = 0x5d84, [0x13a6] = 0x5d82, [0x13a7] = 0x5da2, [0x13a8] = 0x5d9d,
-  [0x13a9] = 0x5dac, [0x13aa] = 0x5dae, [0x13ab] = 0x5dbd, [0x13ac] = 0x5d90,
-  [0x13ad] = 0x5db7, [0x13ae] = 0x5dbc, [0x13af] = 0x5dc9, [0x13b0] = 0x5dcd,
-  [0x13b1] = 0x5dd3, [0x13b2] = 0x5dd2, [0x13b3] = 0x5dd6, [0x13b4] = 0x5ddb,
-  [0x13b5] = 0x5deb, [0x13b6] = 0x5df2, [0x13b7] = 0x5df5, [0x13b8] = 0x5e0b,
-  [0x13b9] = 0x5e1a, [0x13ba] = 0x5e19, [0x13bb] = 0x5e11, [0x13bc] = 0x5e1b,
-  [0x13bd] = 0x5e36, [0x13be] = 0x5e37, [0x13bf] = 0x5e44, [0x13c0] = 0x5e43,
-  [0x13c1] = 0x5e40, [0x13c2] = 0x5e4e, [0x13c3] = 0x5e57, [0x13c4] = 0x5e54,
-  [0x13c5] = 0x5e5f, [0x13c6] = 0x5e62, [0x13c7] = 0x5e64, [0x13c8] = 0x5e47,
-  [0x13c9] = 0x5e75, [0x13ca] = 0x5e76, [0x13cb] = 0x5e7a, [0x13cc] = 0x9ebc,
-  [0x13cd] = 0x5e7f, [0x13ce] = 0x5ea0, [0x13cf] = 0x5ec1, [0x13d0] = 0x5ec2,
-  [0x13d1] = 0x5ec8, [0x13d2] = 0x5ed0, [0x13d3] = 0x5ecf, [0x13d4] = 0x5ed6,
-  [0x13d5] = 0x5ee3, [0x13d6] = 0x5edd, [0x13d7] = 0x5eda, [0x13d8] = 0x5edb,
-  [0x13d9] = 0x5ee2, [0x13da] = 0x5ee1, [0x13db] = 0x5ee8, [0x13dc] = 0x5ee9,
-  [0x13dd] = 0x5eec, [0x13de] = 0x5ef1, [0x13df] = 0x5ef3, [0x13e0] = 0x5ef0,
-  [0x13e1] = 0x5ef4, [0x13e2] = 0x5ef8, [0x13e3] = 0x5efe, [0x13e4] = 0x5f03,
-  [0x13e5] = 0x5f09, [0x13e6] = 0x5f5d, [0x13e7] = 0x5f5c, [0x13e8] = 0x5f0b,
-  [0x13e9] = 0x5f11, [0x13ea] = 0x5f16, [0x13eb] = 0x5f29, [0x13ec] = 0x5f2d,
-  [0x13ed] = 0x5f38, [0x13ee] = 0x5f41, [0x13ef] = 0x5f48, [0x13f0] = 0x5f4c,
-  [0x13f1] = 0x5f4e, [0x13f2] = 0x5f2f, [0x13f3] = 0x5f51, [0x13f4] = 0x5f56,
-  [0x13f5] = 0x5f57, [0x13f6] = 0x5f59, [0x13f7] = 0x5f61, [0x13f8] = 0x5f6d,
-  [0x13f9] = 0x5f73, [0x13fa] = 0x5f77, [0x13fb] = 0x5f83, [0x13fc] = 0x5f82,
-  [0x13fd] = 0x5f7f, [0x13fe] = 0x5f8a, [0x13ff] = 0x5f88, [0x1400] = 0x5f91,
-  [0x1401] = 0x5f87, [0x1402] = 0x5f9e, [0x1403] = 0x5f99, [0x1404] = 0x5f98,
-  [0x1405] = 0x5fa0, [0x1406] = 0x5fa8, [0x1407] = 0x5fad, [0x1408] = 0x5fbc,
-  [0x1409] = 0x5fd6, [0x140a] = 0x5ffb, [0x140b] = 0x5fe4, [0x140c] = 0x5ff8,
-  [0x140d] = 0x5ff1, [0x140e] = 0x5fdd, [0x140f] = 0x60b3, [0x1410] = 0x5fff,
-  [0x1411] = 0x6021, [0x1412] = 0x6060, [0x1413] = 0x6019, [0x1414] = 0x6010,
-  [0x1415] = 0x6029, [0x1416] = 0x600e, [0x1417] = 0x6031, [0x1418] = 0x601b,
-  [0x1419] = 0x6015, [0x141a] = 0x602b, [0x141b] = 0x6026, [0x141c] = 0x600f,
-  [0x141d] = 0x603a, [0x141e] = 0x605a, [0x141f] = 0x6041, [0x1420] = 0x606a,
-  [0x1421] = 0x6077, [0x1422] = 0x605f, [0x1423] = 0x604a, [0x1424] = 0x6046,
-  [0x1425] = 0x604d, [0x1426] = 0x6063, [0x1427] = 0x6043, [0x1428] = 0x6064,
-  [0x1429] = 0x6042, [0x142a] = 0x606c, [0x142b] = 0x606b, [0x142c] = 0x6059,
-  [0x142d] = 0x6081, [0x142e] = 0x608d, [0x142f] = 0x60e7, [0x1430] = 0x6083,
-  [0x1431] = 0x609a, [0x1432] = 0x6084, [0x1433] = 0x609b, [0x1434] = 0x6096,
-  [0x1435] = 0x6097, [0x1436] = 0x6092, [0x1437] = 0x60a7, [0x1438] = 0x608b,
-  [0x1439] = 0x60e1, [0x143a] = 0x60b8, [0x143b] = 0x60e0, [0x143c] = 0x60d3,
-  [0x143d] = 0x60b4, [0x143e] = 0x5ff0, [0x143f] = 0x60bd, [0x1440] = 0x60c6,
-  [0x1441] = 0x60b5, [0x1442] = 0x60d8, [0x1443] = 0x614d, [0x1444] = 0x6115,
-  [0x1445] = 0x6106, [0x1446] = 0x60f6, [0x1447] = 0x60f7, [0x1448] = 0x6100,
-  [0x1449] = 0x60f4, [0x144a] = 0x60fa, [0x144b] = 0x6103, [0x144c] = 0x6121,
-  [0x144d] = 0x60fb, [0x144e] = 0x60f1, [0x144f] = 0x610d, [0x1450] = 0x610e,
-  [0x1451] = 0x6147, [0x1452] = 0x613e, [0x1453] = 0x6128, [0x1454] = 0x6127,
-  [0x1455] = 0x614a, [0x1456] = 0x613f, [0x1457] = 0x613c, [0x1458] = 0x612c,
-  [0x1459] = 0x6134, [0x145a] = 0x613d, [0x145b] = 0x6142, [0x145c] = 0x6144,
-  [0x145d] = 0x6173, [0x145e] = 0x6177, [0x145f] = 0x6158, [0x1460] = 0x6159,
-  [0x1461] = 0x615a, [0x1462] = 0x616b, [0x1463] = 0x6174, [0x1464] = 0x616f,
-  [0x1465] = 0x6165, [0x1466] = 0x6171, [0x1467] = 0x615f, [0x1468] = 0x615d,
-  [0x1469] = 0x6153, [0x146a] = 0x6175, [0x146b] = 0x6199, [0x146c] = 0x6196,
-  [0x146d] = 0x6187, [0x146e] = 0x61ac, [0x146f] = 0x6194, [0x1470] = 0x619a,
-  [0x1471] = 0x618a, [0x1472] = 0x6191, [0x1473] = 0x61ab, [0x1474] = 0x61ae,
-  [0x1475] = 0x61cc, [0x1476] = 0x61ca, [0x1477] = 0x61c9, [0x1478] = 0x61f7,
-  [0x1479] = 0x61c8, [0x147a] = 0x61c3, [0x147b] = 0x61c6, [0x147c] = 0x61ba,
-  [0x147d] = 0x61cb, [0x147e] = 0x7f79, [0x147f] = 0x61cd, [0x1480] = 0x61e6,
-  [0x1481] = 0x61e3, [0x1482] = 0x61f6, [0x1483] = 0x61fa, [0x1484] = 0x61f4,
-  [0x1485] = 0x61ff, [0x1486] = 0x61fd, [0x1487] = 0x61fc, [0x1488] = 0x61fe,
-  [0x1489] = 0x6200, [0x148a] = 0x6208, [0x148b] = 0x6209, [0x148c] = 0x620d,
-  [0x148d] = 0x620c, [0x148e] = 0x6214, [0x148f] = 0x621b, [0x1490] = 0x621e,
-  [0x1491] = 0x6221, [0x1492] = 0x622a, [0x1493] = 0x622e, [0x1494] = 0x6230,
-  [0x1495] = 0x6232, [0x1496] = 0x6233, [0x1497] = 0x6241, [0x1498] = 0x624e,
-  [0x1499] = 0x625e, [0x149a] = 0x6263, [0x149b] = 0x625b, [0x149c] = 0x6260,
-  [0x149d] = 0x6268, [0x149e] = 0x627c, [0x149f] = 0x6282, [0x14a0] = 0x6289,
-  [0x14a1] = 0x627e, [0x14a2] = 0x6292, [0x14a3] = 0x6293, [0x14a4] = 0x6296,
-  [0x14a5] = 0x62d4, [0x14a6] = 0x6283, [0x14a7] = 0x6294, [0x14a8] = 0x62d7,
-  [0x14a9] = 0x62d1, [0x14aa] = 0x62bb, [0x14ab] = 0x62cf, [0x14ac] = 0x62ff,
-  [0x14ad] = 0x62c6, [0x14ae] = 0x64d4, [0x14af] = 0x62c8, [0x14b0] = 0x62dc,
-  [0x14b1] = 0x62cc, [0x14b2] = 0x62ca, [0x14b3] = 0x62c2, [0x14b4] = 0x62c7,
-  [0x14b5] = 0x629b, [0x14b6] = 0x62c9, [0x14b7] = 0x630c, [0x14b8] = 0x62ee,
-  [0x14b9] = 0x62f1, [0x14ba] = 0x6327, [0x14bb] = 0x6302, [0x14bc] = 0x6308,
-  [0x14bd] = 0x62ef, [0x14be] = 0x62f5, [0x14bf] = 0x6350, [0x14c0] = 0x633e,
-  [0x14c1] = 0x634d, [0x14c2] = 0x641c, [0x14c3] = 0x634f, [0x14c4] = 0x6396,
-  [0x14c5] = 0x638e, [0x14c6] = 0x6380, [0x14c7] = 0x63ab, [0x14c8] = 0x6376,
-  [0x14c9] = 0x63a3, [0x14ca] = 0x638f, [0x14cb] = 0x6389, [0x14cc] = 0x639f,
-  [0x14cd] = 0x63b5, [0x14ce] = 0x636b, [0x14cf] = 0x6369, [0x14d0] = 0x63be,
-  [0x14d1] = 0x63e9, [0x14d2] = 0x63c0, [0x14d3] = 0x63c6, [0x14d4] = 0x63e3,
-  [0x14d5] = 0x63c9, [0x14d6] = 0x63d2, [0x14d7] = 0x63f6, [0x14d8] = 0x63c4,
-  [0x14d9] = 0x6416, [0x14da] = 0x6434, [0x14db] = 0x6406, [0x14dc] = 0x6413,
-  [0x14dd] = 0x6426, [0x14de] = 0x6436, [0x14df] = 0x651d, [0x14e0] = 0x6417,
-  [0x14e1] = 0x6428, [0x14e2] = 0x640f, [0x14e3] = 0x6467, [0x14e4] = 0x646f,
-  [0x14e5] = 0x6476, [0x14e6] = 0x644e, [0x14e7] = 0x652a, [0x14e8] = 0x6495,
-  [0x14e9] = 0x6493, [0x14ea] = 0x64a5, [0x14eb] = 0x64a9, [0x14ec] = 0x6488,
-  [0x14ed] = 0x64bc, [0x14ee] = 0x64da, [0x14ef] = 0x64d2, [0x14f0] = 0x64c5,
-  [0x14f1] = 0x64c7, [0x14f2] = 0x64bb, [0x14f3] = 0x64d8, [0x14f4] = 0x64c2,
-  [0x14f5] = 0x64f1, [0x14f6] = 0x64e7, [0x14f7] = 0x8209, [0x14f8] = 0x64e0,
-  [0x14f9] = 0x64e1, [0x14fa] = 0x62ac, [0x14fb] = 0x64e3, [0x14fc] = 0x64ef,
-  [0x14fd] = 0x652c, [0x14fe] = 0x64f6, [0x14ff] = 0x64f4, [0x1500] = 0x64f2,
-  [0x1501] = 0x64fa, [0x1502] = 0x6500, [0x1503] = 0x64fd, [0x1504] = 0x6518,
-  [0x1505] = 0x651c, [0x1506] = 0x6505, [0x1507] = 0x6524, [0x1508] = 0x6523,
-  [0x1509] = 0x652b, [0x150a] = 0x6534, [0x150b] = 0x6535, [0x150c] = 0x6537,
-  [0x150d] = 0x6536, [0x150e] = 0x6538, [0x150f] = 0x754b, [0x1510] = 0x6548,
-  [0x1511] = 0x6556, [0x1512] = 0x6555, [0x1513] = 0x654d, [0x1514] = 0x6558,
-  [0x1515] = 0x655e, [0x1516] = 0x655d, [0x1517] = 0x6572, [0x1518] = 0x6578,
-  [0x1519] = 0x6582, [0x151a] = 0x6583, [0x151b] = 0x8b8a, [0x151c] = 0x659b,
-  [0x151d] = 0x659f, [0x151e] = 0x65ab, [0x151f] = 0x65b7, [0x1520] = 0x65c3,
-  [0x1521] = 0x65c6, [0x1522] = 0x65c1, [0x1523] = 0x65c4, [0x1524] = 0x65cc,
-  [0x1525] = 0x65d2, [0x1526] = 0x65db, [0x1527] = 0x65d9, [0x1528] = 0x65e0,
-  [0x1529] = 0x65e1, [0x152a] = 0x65f1, [0x152b] = 0x6772, [0x152c] = 0x660a,
-  [0x152d] = 0x6603, [0x152e] = 0x65fb, [0x152f] = 0x6773, [0x1530] = 0x6635,
-  [0x1531] = 0x6636, [0x1532] = 0x6634, [0x1533] = 0x661c, [0x1534] = 0x664f,
-  [0x1535] = 0x6644, [0x1536] = 0x6649, [0x1537] = 0x6641, [0x1538] = 0x665e,
-  [0x1539] = 0x665d, [0x153a] = 0x6664, [0x153b] = 0x6667, [0x153c] = 0x6668,
-  [0x153d] = 0x665f, [0x153e] = 0x6662, [0x153f] = 0x6670, [0x1540] = 0x6683,
-  [0x1541] = 0x6688, [0x1542] = 0x668e, [0x1543] = 0x6689, [0x1544] = 0x6684,
-  [0x1545] = 0x6698, [0x1546] = 0x669d, [0x1547] = 0x66c1, [0x1548] = 0x66b9,
-  [0x1549] = 0x66c9, [0x154a] = 0x66be, [0x154b] = 0x66bc, [0x154c] = 0x66c4,
-  [0x154d] = 0x66b8, [0x154e] = 0x66d6, [0x154f] = 0x66da, [0x1550] = 0x66e0,
-  [0x1551] = 0x663f, [0x1552] = 0x66e6, [0x1553] = 0x66e9, [0x1554] = 0x66f0,
-  [0x1555] = 0x66f5, [0x1556] = 0x66f7, [0x1557] = 0x670f, [0x1558] = 0x6716,
-  [0x1559] = 0x671e, [0x155a] = 0x6726, [0x155b] = 0x6727, [0x155c] = 0x9738,
-  [0x155d] = 0x672e, [0x155e] = 0x673f, [0x155f] = 0x6736, [0x1560] = 0x6741,
-  [0x1561] = 0x6738, [0x1562] = 0x6737, [0x1563] = 0x6746, [0x1564] = 0x675e,
-  [0x1565] = 0x6760, [0x1566] = 0x6759, [0x1567] = 0x6763, [0x1568] = 0x6764,
-  [0x1569] = 0x6789, [0x156a] = 0x6770, [0x156b] = 0x67a9, [0x156c] = 0x677c,
-  [0x156d] = 0x676a, [0x156e] = 0x678c, [0x156f] = 0x678b, [0x1570] = 0x67a6,
-  [0x1571] = 0x67a1, [0x1572] = 0x6785, [0x1573] = 0x67b7, [0x1574] = 0x67ef,
-  [0x1575] = 0x67b4, [0x1576] = 0x67ec, [0x1577] = 0x67b3, [0x1578] = 0x67e9,
-  [0x1579] = 0x67b8, [0x157a] = 0x67e4, [0x157b] = 0x67de, [0x157c] = 0x67dd,
-  [0x157d] = 0x67e2, [0x157e] = 0x67ee, [0x157f] = 0x67b9, [0x1580] = 0x67ce,
-  [0x1581] = 0x67c6, [0x1582] = 0x67e7, [0x1583] = 0x6a9c, [0x1584] = 0x681e,
-  [0x1585] = 0x6846, [0x1586] = 0x6829, [0x1587] = 0x6840, [0x1588] = 0x684d,
-  [0x1589] = 0x6832, [0x158a] = 0x684e, [0x158b] = 0x68b3, [0x158c] = 0x682b,
-  [0x158d] = 0x6859, [0x158e] = 0x6863, [0x158f] = 0x6877, [0x1590] = 0x687f,
-  [0x1591] = 0x689f, [0x1592] = 0x688f, [0x1593] = 0x68ad, [0x1594] = 0x6894,
-  [0x1595] = 0x689d, [0x1596] = 0x689b, [0x1597] = 0x6883, [0x1598] = 0x6aae,
-  [0x1599] = 0x68b9, [0x159a] = 0x6874, [0x159b] = 0x68b5, [0x159c] = 0x68a0,
-  [0x159d] = 0x68ba, [0x159e] = 0x690f, [0x159f] = 0x688d, [0x15a0] = 0x687e,
-  [0x15a1] = 0x6901, [0x15a2] = 0x68ca, [0x15a3] = 0x6908, [0x15a4] = 0x68d8,
-  [0x15a5] = 0x6922, [0x15a6] = 0x6926, [0x15a7] = 0x68e1, [0x15a8] = 0x690c,
-  [0x15a9] = 0x68cd, [0x15aa] = 0x68d4, [0x15ab] = 0x68e7, [0x15ac] = 0x68d5,
-  [0x15ad] = 0x6936, [0x15ae] = 0x6912, [0x15af] = 0x6904, [0x15b0] = 0x68d7,
-  [0x15b1] = 0x68e3, [0x15b2] = 0x6925, [0x15b3] = 0x68f9, [0x15b4] = 0x68e0,
-  [0x15b5] = 0x68ef, [0x15b6] = 0x6928, [0x15b7] = 0x692a, [0x15b8] = 0x691a,
-  [0x15b9] = 0x6923, [0x15ba] = 0x6921, [0x15bb] = 0x68c6, [0x15bc] = 0x6979,
-  [0x15bd] = 0x6977, [0x15be] = 0x695c, [0x15bf] = 0x6978, [0x15c0] = 0x696b,
-  [0x15c1] = 0x6954, [0x15c2] = 0x697e, [0x15c3] = 0x696e, [0x15c4] = 0x6939,
-  [0x15c5] = 0x6974, [0x15c6] = 0x693d, [0x15c7] = 0x6959, [0x15c8] = 0x6930,
-  [0x15c9] = 0x6961, [0x15ca] = 0x695e, [0x15cb] = 0x695d, [0x15cc] = 0x6981,
-  [0x15cd] = 0x696a, [0x15ce] = 0x69b2, [0x15cf] = 0x69ae, [0x15d0] = 0x69d0,
-  [0x15d1] = 0x69bf, [0x15d2] = 0x69c1, [0x15d3] = 0x69d3, [0x15d4] = 0x69be,
-  [0x15d5] = 0x69ce, [0x15d6] = 0x5be8, [0x15d7] = 0x69ca, [0x15d8] = 0x69dd,
-  [0x15d9] = 0x69bb, [0x15da] = 0x69c3, [0x15db] = 0x69a7, [0x15dc] = 0x6a2e,
-  [0x15dd] = 0x6991, [0x15de] = 0x69a0, [0x15df] = 0x699c, [0x15e0] = 0x6995,
-  [0x15e1] = 0x69b4, [0x15e2] = 0x69de, [0x15e3] = 0x69e8, [0x15e4] = 0x6a02,
-  [0x15e5] = 0x6a1b, [0x15e6] = 0x69ff, [0x15e7] = 0x6b0a, [0x15e8] = 0x69f9,
-  [0x15e9] = 0x69f2, [0x15ea] = 0x69e7, [0x15eb] = 0x6a05, [0x15ec] = 0x69b1,
-  [0x15ed] = 0x6a1e, [0x15ee] = 0x69ed, [0x15ef] = 0x6a14, [0x15f0] = 0x69eb,
-  [0x15f1] = 0x6a0a, [0x15f2] = 0x6a12, [0x15f3] = 0x6ac1, [0x15f4] = 0x6a23,
-  [0x15f5] = 0x6a13, [0x15f6] = 0x6a44, [0x15f7] = 0x6a0c, [0x15f8] = 0x6a72,
-  [0x15f9] = 0x6a36, [0x15fa] = 0x6a78, [0x15fb] = 0x6a47, [0x15fc] = 0x6a62,
-  [0x15fd] = 0x6a59, [0x15fe] = 0x6a66, [0x15ff] = 0x6a48, [0x1600] = 0x6a38,
-  [0x1601] = 0x6a22, [0x1602] = 0x6a90, [0x1603] = 0x6a8d, [0x1604] = 0x6aa0,
-  [0x1605] = 0x6a84, [0x1606] = 0x6aa2, [0x1607] = 0x6aa3, [0x1608] = 0x6a97,
-  [0x1609] = 0x8617, [0x160a] = 0x6abb, [0x160b] = 0x6ac3, [0x160c] = 0x6ac2,
-  [0x160d] = 0x6ab8, [0x160e] = 0x6ab3, [0x160f] = 0x6aac, [0x1610] = 0x6ade,
-  [0x1611] = 0x6ad1, [0x1612] = 0x6adf, [0x1613] = 0x6aaa, [0x1614] = 0x6ada,
-  [0x1615] = 0x6aea, [0x1616] = 0x6afb, [0x1617] = 0x6b05, [0x1618] = 0x8616,
-  [0x1619] = 0x6afa, [0x161a] = 0x6b12, [0x161b] = 0x6b16, [0x161c] = 0x9b31,
-  [0x161d] = 0x6b1f, [0x161e] = 0x6b38, [0x161f] = 0x6b37, [0x1620] = 0x76dc,
-  [0x1621] = 0x6b39, [0x1622] = 0x98ee, [0x1623] = 0x6b47, [0x1624] = 0x6b43,
-  [0x1625] = 0x6b49, [0x1626] = 0x6b50, [0x1627] = 0x6b59, [0x1628] = 0x6b54,
-  [0x1629] = 0x6b5b, [0x162a] = 0x6b5f, [0x162b] = 0x6b61, [0x162c] = 0x6b78,
-  [0x162d] = 0x6b79, [0x162e] = 0x6b7f, [0x162f] = 0x6b80, [0x1630] = 0x6b84,
-  [0x1631] = 0x6b83, [0x1632] = 0x6b8d, [0x1633] = 0x6b98, [0x1634] = 0x6b95,
-  [0x1635] = 0x6b9e, [0x1636] = 0x6ba4, [0x1637] = 0x6baa, [0x1638] = 0x6bab,
-  [0x1639] = 0x6baf, [0x163a] = 0x6bb2, [0x163b] = 0x6bb1, [0x163c] = 0x6bb3,
-  [0x163d] = 0x6bb7, [0x163e] = 0x6bbc, [0x163f] = 0x6bc6, [0x1640] = 0x6bcb,
-  [0x1641] = 0x6bd3, [0x1642] = 0x6bdf, [0x1643] = 0x6bec, [0x1644] = 0x6beb,
-  [0x1645] = 0x6bf3, [0x1646] = 0x6bef, [0x1647] = 0x9ebe, [0x1648] = 0x6c08,
-  [0x1649] = 0x6c13, [0x164a] = 0x6c14, [0x164b] = 0x6c1b, [0x164c] = 0x6c24,
-  [0x164d] = 0x6c23, [0x164e] = 0x6c5e, [0x164f] = 0x6c55, [0x1650] = 0x6c62,
-  [0x1651] = 0x6c6a, [0x1652] = 0x6c82, [0x1653] = 0x6c8d, [0x1654] = 0x6c9a,
-  [0x1655] = 0x6c81, [0x1656] = 0x6c9b, [0x1657] = 0x6c7e, [0x1658] = 0x6c68,
-  [0x1659] = 0x6c73, [0x165a] = 0x6c92, [0x165b] = 0x6c90, [0x165c] = 0x6cc4,
-  [0x165d] = 0x6cf1, [0x165e] = 0x6cd3, [0x165f] = 0x6cbd, [0x1660] = 0x6cd7,
-  [0x1661] = 0x6cc5, [0x1662] = 0x6cdd, [0x1663] = 0x6cae, [0x1664] = 0x6cb1,
-  [0x1665] = 0x6cbe, [0x1666] = 0x6cba, [0x1667] = 0x6cdb, [0x1668] = 0x6cef,
-  [0x1669] = 0x6cd9, [0x166a] = 0x6cea, [0x166b] = 0x6d1f, [0x166c] = 0x884d,
-  [0x166d] = 0x6d36, [0x166e] = 0x6d2b, [0x166f] = 0x6d3d, [0x1670] = 0x6d38,
-  [0x1671] = 0x6d19, [0x1672] = 0x6d35, [0x1673] = 0x6d33, [0x1674] = 0x6d12,
-  [0x1675] = 0x6d0c, [0x1676] = 0x6d63, [0x1677] = 0x6d93, [0x1678] = 0x6d64,
-  [0x1679] = 0x6d5a, [0x167a] = 0x6d79, [0x167b] = 0x6d59, [0x167c] = 0x6d8e,
-  [0x167d] = 0x6d95, [0x167e] = 0x6fe4, [0x167f] = 0x6d85, [0x1680] = 0x6df9,
-  [0x1681] = 0x6e15, [0x1682] = 0x6e0a, [0x1683] = 0x6db5, [0x1684] = 0x6dc7,
-  [0x1685] = 0x6de6, [0x1686] = 0x6db8, [0x1687] = 0x6dc6, [0x1688] = 0x6dec,
-  [0x1689] = 0x6dde, [0x168a] = 0x6dcc, [0x168b] = 0x6de8, [0x168c] = 0x6dd2,
-  [0x168d] = 0x6dc5, [0x168e] = 0x6dfa, [0x168f] = 0x6dd9, [0x1690] = 0x6de4,
-  [0x1691] = 0x6dd5, [0x1692] = 0x6dea, [0x1693] = 0x6dee, [0x1694] = 0x6e2d,
-  [0x1695] = 0x6e6e, [0x1696] = 0x6e2e, [0x1697] = 0x6e19, [0x1698] = 0x6e72,
-  [0x1699] = 0x6e5f, [0x169a] = 0x6e3e, [0x169b] = 0x6e23, [0x169c] = 0x6e6b,
-  [0x169d] = 0x6e2b, [0x169e] = 0x6e76, [0x169f] = 0x6e4d, [0x16a0] = 0x6e1f,
-  [0x16a1] = 0x6e43, [0x16a2] = 0x6e3a, [0x16a3] = 0x6e4e, [0x16a4] = 0x6e24,
-  [0x16a5] = 0x6eff, [0x16a6] = 0x6e1d, [0x16a7] = 0x6e38, [0x16a8] = 0x6e82,
-  [0x16a9] = 0x6eaa, [0x16aa] = 0x6e98, [0x16ab] = 0x6ec9, [0x16ac] = 0x6eb7,
-  [0x16ad] = 0x6ed3, [0x16ae] = 0x6ebd, [0x16af] = 0x6eaf, [0x16b0] = 0x6ec4,
-  [0x16b1] = 0x6eb2, [0x16b2] = 0x6ed4, [0x16b3] = 0x6ed5, [0x16b4] = 0x6e8f,
-  [0x16b5] = 0x6ea5, [0x16b6] = 0x6ec2, [0x16b7] = 0x6e9f, [0x16b8] = 0x6f41,
-  [0x16b9] = 0x6f11, [0x16ba] = 0x704c, [0x16bb] = 0x6eec, [0x16bc] = 0x6ef8,
-  [0x16bd] = 0x6efe, [0x16be] = 0x6f3f, [0x16bf] = 0x6ef2, [0x16c0] = 0x6f31,
-  [0x16c1] = 0x6eef, [0x16c2] = 0x6f32, [0x16c3] = 0x6ecc, [0x16c4] = 0x6f3e,
-  [0x16c5] = 0x6f13, [0x16c6] = 0x6ef7, [0x16c7] = 0x6f86, [0x16c8] = 0x6f7a,
-  [0x16c9] = 0x6f78, [0x16ca] = 0x6f81, [0x16cb] = 0x6f80, [0x16cc] = 0x6f6f,
-  [0x16cd] = 0x6f5b, [0x16ce] = 0x6ff3, [0x16cf] = 0x6f6d, [0x16d0] = 0x6f82,
-  [0x16d1] = 0x6f7c, [0x16d2] = 0x6f58, [0x16d3] = 0x6f8e, [0x16d4] = 0x6f91,
-  [0x16d5] = 0x6fc2, [0x16d6] = 0x6f66, [0x16d7] = 0x6fb3, [0x16d8] = 0x6fa3,
-  [0x16d9] = 0x6fa1, [0x16da] = 0x6fa4, [0x16db] = 0x6fb9, [0x16dc] = 0x6fc6,
-  [0x16dd] = 0x6faa, [0x16de] = 0x6fdf, [0x16df] = 0x6fd5, [0x16e0] = 0x6fec,
-  [0x16e1] = 0x6fd4, [0x16e2] = 0x6fd8, [0x16e3] = 0x6ff1, [0x16e4] = 0x6fee,
-  [0x16e5] = 0x6fdb, [0x16e6] = 0x7009, [0x16e7] = 0x700b, [0x16e8] = 0x6ffa,
-  [0x16e9] = 0x7011, [0x16ea] = 0x7001, [0x16eb] = 0x700f, [0x16ec] = 0x6ffe,
-  [0x16ed] = 0x701b, [0x16ee] = 0x701a, [0x16ef] = 0x6f74, [0x16f0] = 0x701d,
-  [0x16f1] = 0x7018, [0x16f2] = 0x701f, [0x16f3] = 0x7030, [0x16f4] = 0x703e,
-  [0x16f5] = 0x7032, [0x16f6] = 0x7051, [0x16f7] = 0x7063, [0x16f8] = 0x7099,
-  [0x16f9] = 0x7092, [0x16fa] = 0x70af, [0x16fb] = 0x70f1, [0x16fc] = 0x70ac,
-  [0x16fd] = 0x70b8, [0x16fe] = 0x70b3, [0x16ff] = 0x70ae, [0x1700] = 0x70df,
-  [0x1701] = 0x70cb, [0x1702] = 0x70dd, [0x1703] = 0x70d9, [0x1704] = 0x7109,
-  [0x1705] = 0x70fd, [0x1706] = 0x711c, [0x1707] = 0x7119, [0x1708] = 0x7165,
-  [0x1709] = 0x7155, [0x170a] = 0x7188, [0x170b] = 0x7166, [0x170c] = 0x7162,
-  [0x170d] = 0x714c, [0x170e] = 0x7156, [0x170f] = 0x716c, [0x1710] = 0x718f,
-  [0x1711] = 0x71fb, [0x1712] = 0x7184, [0x1713] = 0x7195, [0x1714] = 0x71a8,
-  [0x1715] = 0x71ac, [0x1716] = 0x71d7, [0x1717] = 0x71b9, [0x1718] = 0x71be,
-  [0x1719] = 0x71d2, [0x171a] = 0x71c9, [0x171b] = 0x71d4, [0x171c] = 0x71ce,
-  [0x171d] = 0x71e0, [0x171e] = 0x71ec, [0x171f] = 0x71e7, [0x1720] = 0x71f5,
-  [0x1721] = 0x71fc, [0x1722] = 0x71f9, [0x1723] = 0x71ff, [0x1724] = 0x720d,
-  [0x1725] = 0x7210, [0x1726] = 0x721b, [0x1727] = 0x7228, [0x1728] = 0x722d,
-  [0x1729] = 0x722c, [0x172a] = 0x7230, [0x172b] = 0x7232, [0x172c] = 0x723b,
-  [0x172d] = 0x723c, [0x172e] = 0x723f, [0x172f] = 0x7240, [0x1730] = 0x7246,
-  [0x1731] = 0x724b, [0x1732] = 0x7258, [0x1733] = 0x7274, [0x1734] = 0x727e,
-  [0x1735] = 0x7282, [0x1736] = 0x7281, [0x1737] = 0x7287, [0x1738] = 0x7292,
-  [0x1739] = 0x7296, [0x173a] = 0x72a2, [0x173b] = 0x72a7, [0x173c] = 0x72b9,
-  [0x173d] = 0x72b2, [0x173e] = 0x72c3, [0x173f] = 0x72c6, [0x1740] = 0x72c4,
-  [0x1741] = 0x72ce, [0x1742] = 0x72d2, [0x1743] = 0x72e2, [0x1744] = 0x72e0,
-  [0x1745] = 0x72e1, [0x1746] = 0x72f9, [0x1747] = 0x72f7, [0x1748] = 0x500f,
-  [0x1749] = 0x7317, [0x174a] = 0x730a, [0x174b] = 0x731c, [0x174c] = 0x7316,
-  [0x174d] = 0x731d, [0x174e] = 0x7334, [0x174f] = 0x732f, [0x1750] = 0x7329,
-  [0x1751] = 0x7325, [0x1752] = 0x733e, [0x1753] = 0x734e, [0x1754] = 0x734f,
-  [0x1755] = 0x9ed8, [0x1756] = 0x7357, [0x1757] = 0x736a, [0x1758] = 0x7368,
-  [0x1759] = 0x7370, [0x175a] = 0x7378, [0x175b] = 0x7375, [0x175c] = 0x737b,
-  [0x175d] = 0x737a, [0x175e] = 0x73c8, [0x175f] = 0x73b3, [0x1760] = 0x73ce,
-  [0x1761] = 0x73bb, [0x1762] = 0x73c0, [0x1763] = 0x73e5, [0x1764] = 0x73ee,
-  [0x1765] = 0x73de, [0x1766] = 0x74a2, [0x1767] = 0x7405, [0x1768] = 0x746f,
-  [0x1769] = 0x7425, [0x176a] = 0x73f8, [0x176b] = 0x7432, [0x176c] = 0x743a,
-  [0x176d] = 0x7455, [0x176e] = 0x743f, [0x176f] = 0x745f, [0x1770] = 0x7459,
-  [0x1771] = 0x7441, [0x1772] = 0x745c, [0x1773] = 0x7469, [0x1774] = 0x7470,
-  [0x1775] = 0x7463, [0x1776] = 0x746a, [0x1777] = 0x7476, [0x1778] = 0x747e,
-  [0x1779] = 0x748b, [0x177a] = 0x749e, [0x177b] = 0x74a7, [0x177c] = 0x74ca,
-  [0x177d] = 0x74cf, [0x177e] = 0x74d4, [0x177f] = 0x73f1, [0x1780] = 0x74e0,
-  [0x1781] = 0x74e3, [0x1782] = 0x74e7, [0x1783] = 0x74e9, [0x1784] = 0x74ee,
-  [0x1785] = 0x74f2, [0x1786] = 0x74f0, [0x1787] = 0x74f1, [0x1788] = 0x74f8,
-  [0x1789] = 0x74f7, [0x178a] = 0x7504, [0x178b] = 0x7503, [0x178c] = 0x7505,
-  [0x178d] = 0x750c, [0x178e] = 0x750e, [0x178f] = 0x750d, [0x1790] = 0x7515,
-  [0x1791] = 0x7513, [0x1792] = 0x751e, [0x1793] = 0x7526, [0x1794] = 0x752c,
-  [0x1795] = 0x753c, [0x1796] = 0x7544, [0x1797] = 0x754d, [0x1798] = 0x754a,
-  [0x1799] = 0x7549, [0x179a] = 0x755b, [0x179b] = 0x7546, [0x179c] = 0x755a,
-  [0x179d] = 0x7569, [0x179e] = 0x7564, [0x179f] = 0x7567, [0x17a0] = 0x756b,
-  [0x17a1] = 0x756d, [0x17a2] = 0x7578, [0x17a3] = 0x7576, [0x17a4] = 0x7586,
-  [0x17a5] = 0x7587, [0x17a6] = 0x7574, [0x17a7] = 0x758a, [0x17a8] = 0x7589,
-  [0x17a9] = 0x7582, [0x17aa] = 0x7594, [0x17ab] = 0x759a, [0x17ac] = 0x759d,
-  [0x17ad] = 0x75a5, [0x17ae] = 0x75a3, [0x17af] = 0x75c2, [0x17b0] = 0x75b3,
-  [0x17b1] = 0x75c3, [0x17b2] = 0x75b5, [0x17b3] = 0x75bd, [0x17b4] = 0x75b8,
-  [0x17b5] = 0x75bc, [0x17b6] = 0x75b1, [0x17b7] = 0x75cd, [0x17b8] = 0x75ca,
-  [0x17b9] = 0x75d2, [0x17ba] = 0x75d9, [0x17bb] = 0x75e3, [0x17bc] = 0x75de,
-  [0x17bd] = 0x75fe, [0x17be] = 0x75ff, [0x17bf] = 0x75fc, [0x17c0] = 0x7601,
-  [0x17c1] = 0x75f0, [0x17c2] = 0x75fa, [0x17c3] = 0x75f2, [0x17c4] = 0x75f3,
-  [0x17c5] = 0x760b, [0x17c6] = 0x760d, [0x17c7] = 0x7609, [0x17c8] = 0x761f,
-  [0x17c9] = 0x7627, [0x17ca] = 0x7620, [0x17cb] = 0x7621, [0x17cc] = 0x7622,
-  [0x17cd] = 0x7624, [0x17ce] = 0x7634, [0x17cf] = 0x7630, [0x17d0] = 0x763b,
-  [0x17d1] = 0x7647, [0x17d2] = 0x7648, [0x17d3] = 0x7646, [0x17d4] = 0x765c,
-  [0x17d5] = 0x7658, [0x17d6] = 0x7661, [0x17d7] = 0x7662, [0x17d8] = 0x7668,
-  [0x17d9] = 0x7669, [0x17da] = 0x766a, [0x17db] = 0x7667, [0x17dc] = 0x766c,
-  [0x17dd] = 0x7670, [0x17de] = 0x7672, [0x17df] = 0x7676, [0x17e0] = 0x7678,
-  [0x17e1] = 0x767c, [0x17e2] = 0x7680, [0x17e3] = 0x7683, [0x17e4] = 0x7688,
-  [0x17e5] = 0x768b, [0x17e6] = 0x768e, [0x17e7] = 0x7696, [0x17e8] = 0x7693,
-  [0x17e9] = 0x7699, [0x17ea] = 0x769a, [0x17eb] = 0x76b0, [0x17ec] = 0x76b4,
-  [0x17ed] = 0x76b8, [0x17ee] = 0x76b9, [0x17ef] = 0x76ba, [0x17f0] = 0x76c2,
-  [0x17f1] = 0x76cd, [0x17f2] = 0x76d6, [0x17f3] = 0x76d2, [0x17f4] = 0x76de,
-  [0x17f5] = 0x76e1, [0x17f6] = 0x76e5, [0x17f7] = 0x76e7, [0x17f8] = 0x76ea,
-  [0x17f9] = 0x862f, [0x17fa] = 0x76fb, [0x17fb] = 0x7708, [0x17fc] = 0x7707,
-  [0x17fd] = 0x7704, [0x17fe] = 0x7729, [0x17ff] = 0x7724, [0x1800] = 0x771e,
-  [0x1801] = 0x7725, [0x1802] = 0x7726, [0x1803] = 0x771b, [0x1804] = 0x7737,
-  [0x1805] = 0x7738, [0x1806] = 0x7747, [0x1807] = 0x775a, [0x1808] = 0x7768,
-  [0x1809] = 0x776b, [0x180a] = 0x775b, [0x180b] = 0x7765, [0x180c] = 0x777f,
-  [0x180d] = 0x777e, [0x180e] = 0x7779, [0x180f] = 0x778e, [0x1810] = 0x778b,
-  [0x1811] = 0x7791, [0x1812] = 0x77a0, [0x1813] = 0x779e, [0x1814] = 0x77b0,
-  [0x1815] = 0x77b6, [0x1816] = 0x77b9, [0x1817] = 0x77bf, [0x1818] = 0x77bc,
-  [0x1819] = 0x77bd, [0x181a] = 0x77bb, [0x181b] = 0x77c7, [0x181c] = 0x77cd,
-  [0x181d] = 0x77d7, [0x181e] = 0x77da, [0x181f] = 0x77dc, [0x1820] = 0x77e3,
-  [0x1821] = 0x77ee, [0x1822] = 0x77fc, [0x1823] = 0x780c, [0x1824] = 0x7812,
-  [0x1825] = 0x7926, [0x1826] = 0x7820, [0x1827] = 0x792a, [0x1828] = 0x7845,
-  [0x1829] = 0x788e, [0x182a] = 0x7874, [0x182b] = 0x7886, [0x182c] = 0x787c,
-  [0x182d] = 0x789a, [0x182e] = 0x788c, [0x182f] = 0x78a3, [0x1830] = 0x78b5,
-  [0x1831] = 0x78aa, [0x1832] = 0x78af, [0x1833] = 0x78d1, [0x1834] = 0x78c6,
-  [0x1835] = 0x78cb, [0x1836] = 0x78d4, [0x1837] = 0x78be, [0x1838] = 0x78bc,
-  [0x1839] = 0x78c5, [0x183a] = 0x78ca, [0x183b] = 0x78ec, [0x183c] = 0x78e7,
-  [0x183d] = 0x78da, [0x183e] = 0x78fd, [0x183f] = 0x78f4, [0x1840] = 0x7907,
-  [0x1841] = 0x7912, [0x1842] = 0x7911, [0x1843] = 0x7919, [0x1844] = 0x792c,
-  [0x1845] = 0x792b, [0x1846] = 0x7940, [0x1847] = 0x7960, [0x1848] = 0x7957,
-  [0x1849] = 0x795f, [0x184a] = 0x795a, [0x184b] = 0x7955, [0x184c] = 0x7953,
-  [0x184d] = 0x797a, [0x184e] = 0x797f, [0x184f] = 0x798a, [0x1850] = 0x799d,
-  [0x1851] = 0x79a7, [0x1852] = 0x9f4b, [0x1853] = 0x79aa, [0x1854] = 0x79ae,
-  [0x1855] = 0x79b3, [0x1856] = 0x79b9, [0x1857] = 0x79ba, [0x1858] = 0x79c9,
-  [0x1859] = 0x79d5, [0x185a] = 0x79e7, [0x185b] = 0x79ec, [0x185c] = 0x79e1,
-  [0x185d] = 0x79e3, [0x185e] = 0x7a08, [0x185f] = 0x7a0d, [0x1860] = 0x7a18,
-  [0x1861] = 0x7a19, [0x1862] = 0x7a20, [0x1863] = 0x7a1f, [0x1864] = 0x7980,
-  [0x1865] = 0x7a31, [0x1866] = 0x7a3b, [0x1867] = 0x7a3e, [0x1868] = 0x7a37,
-  [0x1869] = 0x7a43, [0x186a] = 0x7a57, [0x186b] = 0x7a49, [0x186c] = 0x7a61,
-  [0x186d] = 0x7a62, [0x186e] = 0x7a69, [0x186f] = 0x9f9d, [0x1870] = 0x7a70,
-  [0x1871] = 0x7a79, [0x1872] = 0x7a7d, [0x1873] = 0x7a88, [0x1874] = 0x7a97,
-  [0x1875] = 0x7a95, [0x1876] = 0x7a98, [0x1877] = 0x7a96, [0x1878] = 0x7aa9,
-  [0x1879] = 0x7ac8, [0x187a] = 0x7ab0, [0x187b] = 0x7ab6, [0x187c] = 0x7ac5,
-  [0x187d] = 0x7ac4, [0x187e] = 0x7abf, [0x187f] = 0x9083, [0x1880] = 0x7ac7,
-  [0x1881] = 0x7aca, [0x1882] = 0x7acd, [0x1883] = 0x7acf, [0x1884] = 0x7ad5,
-  [0x1885] = 0x7ad3, [0x1886] = 0x7ad9, [0x1887] = 0x7ada, [0x1888] = 0x7add,
-  [0x1889] = 0x7ae1, [0x188a] = 0x7ae2, [0x188b] = 0x7ae6, [0x188c] = 0x7aed,
-  [0x188d] = 0x7af0, [0x188e] = 0x7b02, [0x188f] = 0x7b0f, [0x1890] = 0x7b0a,
-  [0x1891] = 0x7b06, [0x1892] = 0x7b33, [0x1893] = 0x7b18, [0x1894] = 0x7b19,
-  [0x1895] = 0x7b1e, [0x1896] = 0x7b35, [0x1897] = 0x7b28, [0x1898] = 0x7b36,
-  [0x1899] = 0x7b50, [0x189a] = 0x7b7a, [0x189b] = 0x7b04, [0x189c] = 0x7b4d,
-  [0x189d] = 0x7b0b, [0x189e] = 0x7b4c, [0x189f] = 0x7b45, [0x18a0] = 0x7b75,
-  [0x18a1] = 0x7b65, [0x18a2] = 0x7b74, [0x18a3] = 0x7b67, [0x18a4] = 0x7b70,
-  [0x18a5] = 0x7b71, [0x18a6] = 0x7b6c, [0x18a7] = 0x7b6e, [0x18a8] = 0x7b9d,
-  [0x18a9] = 0x7b98, [0x18aa] = 0x7b9f, [0x18ab] = 0x7b8d, [0x18ac] = 0x7b9c,
-  [0x18ad] = 0x7b9a, [0x18ae] = 0x7b8b, [0x18af] = 0x7b92, [0x18b0] = 0x7b8f,
-  [0x18b1] = 0x7b5d, [0x18b2] = 0x7b99, [0x18b3] = 0x7bcb, [0x18b4] = 0x7bc1,
-  [0x18b5] = 0x7bcc, [0x18b6] = 0x7bcf, [0x18b7] = 0x7bb4, [0x18b8] = 0x7bc6,
-  [0x18b9] = 0x7bdd, [0x18ba] = 0x7be9, [0x18bb] = 0x7c11, [0x18bc] = 0x7c14,
-  [0x18bd] = 0x7be6, [0x18be] = 0x7be5, [0x18bf] = 0x7c60, [0x18c0] = 0x7c00,
-  [0x18c1] = 0x7c07, [0x18c2] = 0x7c13, [0x18c3] = 0x7bf3, [0x18c4] = 0x7bf7,
-  [0x18c5] = 0x7c17, [0x18c6] = 0x7c0d, [0x18c7] = 0x7bf6, [0x18c8] = 0x7c23,
-  [0x18c9] = 0x7c27, [0x18ca] = 0x7c2a, [0x18cb] = 0x7c1f, [0x18cc] = 0x7c37,
-  [0x18cd] = 0x7c2b, [0x18ce] = 0x7c3d, [0x18cf] = 0x7c4c, [0x18d0] = 0x7c43,
-  [0x18d1] = 0x7c54, [0x18d2] = 0x7c4f, [0x18d3] = 0x7c40, [0x18d4] = 0x7c50,
-  [0x18d5] = 0x7c58, [0x18d6] = 0x7c5f, [0x18d7] = 0x7c64, [0x18d8] = 0x7c56,
-  [0x18d9] = 0x7c65, [0x18da] = 0x7c6c, [0x18db] = 0x7c75, [0x18dc] = 0x7c83,
-  [0x18dd] = 0x7c90, [0x18de] = 0x7ca4, [0x18df] = 0x7cad, [0x18e0] = 0x7ca2,
-  [0x18e1] = 0x7cab, [0x18e2] = 0x7ca1, [0x18e3] = 0x7ca8, [0x18e4] = 0x7cb3,
-  [0x18e5] = 0x7cb2, [0x18e6] = 0x7cb1, [0x18e7] = 0x7cae, [0x18e8] = 0x7cb9,
-  [0x18e9] = 0x7cbd, [0x18ea] = 0x7cc0, [0x18eb] = 0x7cc5, [0x18ec] = 0x7cc2,
-  [0x18ed] = 0x7cd8, [0x18ee] = 0x7cd2, [0x18ef] = 0x7cdc, [0x18f0] = 0x7ce2,
-  [0x18f1] = 0x9b3b, [0x18f2] = 0x7cef, [0x18f3] = 0x7cf2, [0x18f4] = 0x7cf4,
-  [0x18f5] = 0x7cf6, [0x18f6] = 0x7cfa, [0x18f7] = 0x7d06, [0x18f8] = 0x7d02,
-  [0x18f9] = 0x7d1c, [0x18fa] = 0x7d15, [0x18fb] = 0x7d0a, [0x18fc] = 0x7d45,
-  [0x18fd] = 0x7d4b, [0x18fe] = 0x7d2e, [0x18ff] = 0x7d32, [0x1900] = 0x7d3f,
-  [0x1901] = 0x7d35, [0x1902] = 0x7d46, [0x1903] = 0x7d73, [0x1904] = 0x7d56,
-  [0x1905] = 0x7d4e, [0x1906] = 0x7d72, [0x1907] = 0x7d68, [0x1908] = 0x7d6e,
-  [0x1909] = 0x7d4f, [0x190a] = 0x7d63, [0x190b] = 0x7d93, [0x190c] = 0x7d89,
-  [0x190d] = 0x7d5b, [0x190e] = 0x7d8f, [0x190f] = 0x7d7d, [0x1910] = 0x7d9b,
-  [0x1911] = 0x7dba, [0x1912] = 0x7dae, [0x1913] = 0x7da3, [0x1914] = 0x7db5,
-  [0x1915] = 0x7dc7, [0x1916] = 0x7dbd, [0x1917] = 0x7dab, [0x1918] = 0x7e3d,
-  [0x1919] = 0x7da2, [0x191a] = 0x7daf, [0x191b] = 0x7ddc, [0x191c] = 0x7db8,
-  [0x191d] = 0x7d9f, [0x191e] = 0x7db0, [0x191f] = 0x7dd8, [0x1920] = 0x7ddd,
-  [0x1921] = 0x7de4, [0x1922] = 0x7dde, [0x1923] = 0x7dfb, [0x1924] = 0x7df2,
-  [0x1925] = 0x7de1, [0x1926] = 0x7e05, [0x1927] = 0x7e0a, [0x1928] = 0x7e23,
-  [0x1929] = 0x7e21, [0x192a] = 0x7e12, [0x192b] = 0x7e31, [0x192c] = 0x7e1f,
-  [0x192d] = 0x7e09, [0x192e] = 0x7e0b, [0x192f] = 0x7e22, [0x1930] = 0x7e46,
-  [0x1931] = 0x7e66, [0x1932] = 0x7e3b, [0x1933] = 0x7e35, [0x1934] = 0x7e39,
-  [0x1935] = 0x7e43, [0x1936] = 0x7e37, [0x1937] = 0x7e32, [0x1938] = 0x7e3a,
-  [0x1939] = 0x7e67, [0x193a] = 0x7e5d, [0x193b] = 0x7e56, [0x193c] = 0x7e5e,
-  [0x193d] = 0x7e59, [0x193e] = 0x7e5a, [0x193f] = 0x7e79, [0x1940] = 0x7e6a,
-  [0x1941] = 0x7e69, [0x1942] = 0x7e7c, [0x1943] = 0x7e7b, [0x1944] = 0x7e83,
-  [0x1945] = 0x7dd5, [0x1946] = 0x7e7d, [0x1947] = 0x8fae, [0x1948] = 0x7e7f,
-  [0x1949] = 0x7e88, [0x194a] = 0x7e89, [0x194b] = 0x7e8c, [0x194c] = 0x7e92,
-  [0x194d] = 0x7e90, [0x194e] = 0x7e93, [0x194f] = 0x7e94, [0x1950] = 0x7e96,
-  [0x1951] = 0x7e8e, [0x1952] = 0x7e9b, [0x1953] = 0x7e9c, [0x1954] = 0x7f38,
-  [0x1955] = 0x7f3a, [0x1956] = 0x7f45, [0x1957] = 0x7f4c, [0x1958] = 0x7f4d,
-  [0x1959] = 0x7f4e, [0x195a] = 0x7f50, [0x195b] = 0x7f51, [0x195c] = 0x7f55,
-  [0x195d] = 0x7f54, [0x195e] = 0x7f58, [0x195f] = 0x7f5f, [0x1960] = 0x7f60,
-  [0x1961] = 0x7f68, [0x1962] = 0x7f69, [0x1963] = 0x7f67, [0x1964] = 0x7f78,
-  [0x1965] = 0x7f82, [0x1966] = 0x7f86, [0x1967] = 0x7f83, [0x1968] = 0x7f88,
-  [0x1969] = 0x7f87, [0x196a] = 0x7f8c, [0x196b] = 0x7f94, [0x196c] = 0x7f9e,
-  [0x196d] = 0x7f9d, [0x196e] = 0x7f9a, [0x196f] = 0x7fa3, [0x1970] = 0x7faf,
-  [0x1971] = 0x7fb2, [0x1972] = 0x7fb9, [0x1973] = 0x7fae, [0x1974] = 0x7fb6,
-  [0x1975] = 0x7fb8, [0x1976] = 0x8b71, [0x1977] = 0x7fc5, [0x1978] = 0x7fc6,
-  [0x1979] = 0x7fca, [0x197a] = 0x7fd5, [0x197b] = 0x7fd4, [0x197c] = 0x7fe1,
-  [0x197d] = 0x7fe6, [0x197e] = 0x7fe9, [0x197f] = 0x7ff3, [0x1980] = 0x7ff9,
-  [0x1981] = 0x98dc, [0x1982] = 0x8006, [0x1983] = 0x8004, [0x1984] = 0x800b,
-  [0x1985] = 0x8012, [0x1986] = 0x8018, [0x1987] = 0x8019, [0x1988] = 0x801c,
-  [0x1989] = 0x8021, [0x198a] = 0x8028, [0x198b] = 0x803f, [0x198c] = 0x803b,
-  [0x198d] = 0x804a, [0x198e] = 0x8046, [0x198f] = 0x8052, [0x1990] = 0x8058,
-  [0x1991] = 0x805a, [0x1992] = 0x805f, [0x1993] = 0x8062, [0x1994] = 0x8068,
-  [0x1995] = 0x8073, [0x1996] = 0x8072, [0x1997] = 0x8070, [0x1998] = 0x8076,
-  [0x1999] = 0x8079, [0x199a] = 0x807d, [0x199b] = 0x807f, [0x199c] = 0x8084,
-  [0x199d] = 0x8086, [0x199e] = 0x8085, [0x199f] = 0x809b, [0x19a0] = 0x8093,
-  [0x19a1] = 0x809a, [0x19a2] = 0x80ad, [0x19a3] = 0x5190, [0x19a4] = 0x80ac,
-  [0x19a5] = 0x80db, [0x19a6] = 0x80e5, [0x19a7] = 0x80d9, [0x19a8] = 0x80dd,
-  [0x19a9] = 0x80c4, [0x19aa] = 0x80da, [0x19ab] = 0x80d6, [0x19ac] = 0x8109,
-  [0x19ad] = 0x80ef, [0x19ae] = 0x80f1, [0x19af] = 0x811b, [0x19b0] = 0x8129,
-  [0x19b1] = 0x8123, [0x19b2] = 0x812f, [0x19b3] = 0x814b, [0x19b4] = 0x968b,
-  [0x19b5] = 0x8146, [0x19b6] = 0x813e, [0x19b7] = 0x8153, [0x19b8] = 0x8151,
-  [0x19b9] = 0x80fc, [0x19ba] = 0x8171, [0x19bb] = 0x816e, [0x19bc] = 0x8165,
-  [0x19bd] = 0x8166, [0x19be] = 0x8174, [0x19bf] = 0x8183, [0x19c0] = 0x8188,
-  [0x19c1] = 0x818a, [0x19c2] = 0x8180, [0x19c3] = 0x8182, [0x19c4] = 0x81a0,
-  [0x19c5] = 0x8195, [0x19c6] = 0x81a4, [0x19c7] = 0x81a3, [0x19c8] = 0x815f,
-  [0x19c9] = 0x8193, [0x19ca] = 0x81a9, [0x19cb] = 0x81b0, [0x19cc] = 0x81b5,
-  [0x19cd] = 0x81be, [0x19ce] = 0x81b8, [0x19cf] = 0x81bd, [0x19d0] = 0x81c0,
-  [0x19d1] = 0x81c2, [0x19d2] = 0x81ba, [0x19d3] = 0x81c9, [0x19d4] = 0x81cd,
-  [0x19d5] = 0x81d1, [0x19d6] = 0x81d9, [0x19d7] = 0x81d8, [0x19d8] = 0x81c8,
-  [0x19d9] = 0x81da, [0x19da] = 0x81df, [0x19db] = 0x81e0, [0x19dc] = 0x81e7,
-  [0x19dd] = 0x81fa, [0x19de] = 0x81fb, [0x19df] = 0x81fe, [0x19e0] = 0x8201,
-  [0x19e1] = 0x8202, [0x19e2] = 0x8205, [0x19e3] = 0x8207, [0x19e4] = 0x820a,
-  [0x19e5] = 0x820d, [0x19e6] = 0x8210, [0x19e7] = 0x8216, [0x19e8] = 0x8229,
-  [0x19e9] = 0x822b, [0x19ea] = 0x8238, [0x19eb] = 0x8233, [0x19ec] = 0x8240,
-  [0x19ed] = 0x8259, [0x19ee] = 0x8258, [0x19ef] = 0x825d, [0x19f0] = 0x825a,
-  [0x19f1] = 0x825f, [0x19f2] = 0x8264, [0x19f3] = 0x8262, [0x19f4] = 0x8268,
-  [0x19f5] = 0x826a, [0x19f6] = 0x826b, [0x19f7] = 0x822e, [0x19f8] = 0x8271,
-  [0x19f9] = 0x8277, [0x19fa] = 0x8278, [0x19fb] = 0x827e, [0x19fc] = 0x828d,
-  [0x19fd] = 0x8292, [0x19fe] = 0x82ab, [0x19ff] = 0x829f, [0x1a00] = 0x82bb,
-  [0x1a01] = 0x82ac, [0x1a02] = 0x82e1, [0x1a03] = 0x82e3, [0x1a04] = 0x82df,
-  [0x1a05] = 0x82d2, [0x1a06] = 0x82f4, [0x1a07] = 0x82f3, [0x1a08] = 0x82fa,
-  [0x1a09] = 0x8393, [0x1a0a] = 0x8303, [0x1a0b] = 0x82fb, [0x1a0c] = 0x82f9,
-  [0x1a0d] = 0x82de, [0x1a0e] = 0x8306, [0x1a0f] = 0x82dc, [0x1a10] = 0x8309,
-  [0x1a11] = 0x82d9, [0x1a12] = 0x8335, [0x1a13] = 0x8334, [0x1a14] = 0x8316,
-  [0x1a15] = 0x8332, [0x1a16] = 0x8331, [0x1a17] = 0x8340, [0x1a18] = 0x8339,
-  [0x1a19] = 0x8350, [0x1a1a] = 0x8345, [0x1a1b] = 0x832f, [0x1a1c] = 0x832b,
-  [0x1a1d] = 0x8317, [0x1a1e] = 0x8318, [0x1a1f] = 0x8385, [0x1a20] = 0x839a,
-  [0x1a21] = 0x83aa, [0x1a22] = 0x839f, [0x1a23] = 0x83a2, [0x1a24] = 0x8396,
-  [0x1a25] = 0x8323, [0x1a26] = 0x838e, [0x1a27] = 0x8387, [0x1a28] = 0x838a,
-  [0x1a29] = 0x837c, [0x1a2a] = 0x83b5, [0x1a2b] = 0x8373, [0x1a2c] = 0x8375,
-  [0x1a2d] = 0x83a0, [0x1a2e] = 0x8389, [0x1a2f] = 0x83a8, [0x1a30] = 0x83f4,
-  [0x1a31] = 0x8413, [0x1a32] = 0x83eb, [0x1a33] = 0x83ce, [0x1a34] = 0x83fd,
-  [0x1a35] = 0x8403, [0x1a36] = 0x83d8, [0x1a37] = 0x840b, [0x1a38] = 0x83c1,
-  [0x1a39] = 0x83f7, [0x1a3a] = 0x8407, [0x1a3b] = 0x83e0, [0x1a3c] = 0x83f2,
-  [0x1a3d] = 0x840d, [0x1a3e] = 0x8422, [0x1a3f] = 0x8420, [0x1a40] = 0x83bd,
-  [0x1a41] = 0x8438, [0x1a42] = 0x8506, [0x1a43] = 0x83fb, [0x1a44] = 0x846d,
-  [0x1a45] = 0x842a, [0x1a46] = 0x843c, [0x1a47] = 0x855a, [0x1a48] = 0x8484,
-  [0x1a49] = 0x8477, [0x1a4a] = 0x846b, [0x1a4b] = 0x84ad, [0x1a4c] = 0x846e,
-  [0x1a4d] = 0x8482, [0x1a4e] = 0x8469, [0x1a4f] = 0x8446, [0x1a50] = 0x842c,
-  [0x1a51] = 0x846f, [0x1a52] = 0x8479, [0x1a53] = 0x8435, [0x1a54] = 0x84ca,
-  [0x1a55] = 0x8462, [0x1a56] = 0x84b9, [0x1a57] = 0x84bf, [0x1a58] = 0x849f,
-  [0x1a59] = 0x84d9, [0x1a5a] = 0x84cd, [0x1a5b] = 0x84bb, [0x1a5c] = 0x84da,
-  [0x1a5d] = 0x84d0, [0x1a5e] = 0x84c1, [0x1a5f] = 0x84c6, [0x1a60] = 0x84d6,
-  [0x1a61] = 0x84a1, [0x1a62] = 0x8521, [0x1a63] = 0x84ff, [0x1a64] = 0x84f4,
-  [0x1a65] = 0x8517, [0x1a66] = 0x8518, [0x1a67] = 0x852c, [0x1a68] = 0x851f,
-  [0x1a69] = 0x8515, [0x1a6a] = 0x8514, [0x1a6b] = 0x84fc, [0x1a6c] = 0x8540,
-  [0x1a6d] = 0x8563, [0x1a6e] = 0x8558, [0x1a6f] = 0x8548, [0x1a70] = 0x8541,
-  [0x1a71] = 0x8602, [0x1a72] = 0x854b, [0x1a73] = 0x8555, [0x1a74] = 0x8580,
-  [0x1a75] = 0x85a4, [0x1a76] = 0x8588, [0x1a77] = 0x8591, [0x1a78] = 0x858a,
-  [0x1a79] = 0x85a8, [0x1a7a] = 0x856d, [0x1a7b] = 0x8594, [0x1a7c] = 0x859b,
-  [0x1a7d] = 0x85ea, [0x1a7e] = 0x8587, [0x1a7f] = 0x859c, [0x1a80] = 0x8577,
-  [0x1a81] = 0x857e, [0x1a82] = 0x8590, [0x1a83] = 0x85c9, [0x1a84] = 0x85ba,
-  [0x1a85] = 0x85cf, [0x1a86] = 0x85b9, [0x1a87] = 0x85d0, [0x1a88] = 0x85d5,
-  [0x1a89] = 0x85dd, [0x1a8a] = 0x85e5, [0x1a8b] = 0x85dc, [0x1a8c] = 0x85f9,
-  [0x1a8d] = 0x860a, [0x1a8e] = 0x8613, [0x1a8f] = 0x860b, [0x1a90] = 0x85fe,
-  [0x1a91] = 0x85fa, [0x1a92] = 0x8606, [0x1a93] = 0x8622, [0x1a94] = 0x861a,
-  [0x1a95] = 0x8630, [0x1a96] = 0x863f, [0x1a97] = 0x864d, [0x1a98] = 0x4e55,
-  [0x1a99] = 0x8654, [0x1a9a] = 0x865f, [0x1a9b] = 0x8667, [0x1a9c] = 0x8671,
-  [0x1a9d] = 0x8693, [0x1a9e] = 0x86a3, [0x1a9f] = 0x86a9, [0x1aa0] = 0x86aa,
-  [0x1aa1] = 0x868b, [0x1aa2] = 0x868c, [0x1aa3] = 0x86b6, [0x1aa4] = 0x86af,
-  [0x1aa5] = 0x86c4, [0x1aa6] = 0x86c6, [0x1aa7] = 0x86b0, [0x1aa8] = 0x86c9,
-  [0x1aa9] = 0x8823, [0x1aaa] = 0x86ab, [0x1aab] = 0x86d4, [0x1aac] = 0x86de,
-  [0x1aad] = 0x86e9, [0x1aae] = 0x86ec, [0x1aaf] = 0x86df, [0x1ab0] = 0x86db,
-  [0x1ab1] = 0x86ef, [0x1ab2] = 0x8712, [0x1ab3] = 0x8706, [0x1ab4] = 0x8708,
-  [0x1ab5] = 0x8700, [0x1ab6] = 0x8703, [0x1ab7] = 0x86fb, [0x1ab8] = 0x8711,
-  [0x1ab9] = 0x8709, [0x1aba] = 0x870d, [0x1abb] = 0x86f9, [0x1abc] = 0x870a,
-  [0x1abd] = 0x8734, [0x1abe] = 0x873f, [0x1abf] = 0x8737, [0x1ac0] = 0x873b,
-  [0x1ac1] = 0x8725, [0x1ac2] = 0x8729, [0x1ac3] = 0x871a, [0x1ac4] = 0x8760,
-  [0x1ac5] = 0x875f, [0x1ac6] = 0x8778, [0x1ac7] = 0x874c, [0x1ac8] = 0x874e,
-  [0x1ac9] = 0x8774, [0x1aca] = 0x8757, [0x1acb] = 0x8768, [0x1acc] = 0x876e,
-  [0x1acd] = 0x8759, [0x1ace] = 0x8753, [0x1acf] = 0x8763, [0x1ad0] = 0x876a,
-  [0x1ad1] = 0x8805, [0x1ad2] = 0x87a2, [0x1ad3] = 0x879f, [0x1ad4] = 0x8782,
-  [0x1ad5] = 0x87af, [0x1ad6] = 0x87cb, [0x1ad7] = 0x87bd, [0x1ad8] = 0x87c0,
-  [0x1ad9] = 0x87d0, [0x1ada] = 0x96d6, [0x1adb] = 0x87ab, [0x1adc] = 0x87c4,
-  [0x1add] = 0x87b3, [0x1ade] = 0x87c7, [0x1adf] = 0x87c6, [0x1ae0] = 0x87bb,
-  [0x1ae1] = 0x87ef, [0x1ae2] = 0x87f2, [0x1ae3] = 0x87e0, [0x1ae4] = 0x880f,
-  [0x1ae5] = 0x880d, [0x1ae6] = 0x87fe, [0x1ae7] = 0x87f6, [0x1ae8] = 0x87f7,
-  [0x1ae9] = 0x880e, [0x1aea] = 0x87d2, [0x1aeb] = 0x8811, [0x1aec] = 0x8816,
-  [0x1aed] = 0x8815, [0x1aee] = 0x8822, [0x1aef] = 0x8821, [0x1af0] = 0x8831,
-  [0x1af1] = 0x8836, [0x1af2] = 0x8839, [0x1af3] = 0x8827, [0x1af4] = 0x883b,
-  [0x1af5] = 0x8844, [0x1af6] = 0x8842, [0x1af7] = 0x8852, [0x1af8] = 0x8859,
-  [0x1af9] = 0x885e, [0x1afa] = 0x8862, [0x1afb] = 0x886b, [0x1afc] = 0x8881,
-  [0x1afd] = 0x887e, [0x1afe] = 0x889e, [0x1aff] = 0x8875, [0x1b00] = 0x887d,
-  [0x1b01] = 0x88b5, [0x1b02] = 0x8872, [0x1b03] = 0x8882, [0x1b04] = 0x8897,
-  [0x1b05] = 0x8892, [0x1b06] = 0x88ae, [0x1b07] = 0x8899, [0x1b08] = 0x88a2,
-  [0x1b09] = 0x888d, [0x1b0a] = 0x88a4, [0x1b0b] = 0x88b0, [0x1b0c] = 0x88bf,
-  [0x1b0d] = 0x88b1, [0x1b0e] = 0x88c3, [0x1b0f] = 0x88c4, [0x1b10] = 0x88d4,
-  [0x1b11] = 0x88d8, [0x1b12] = 0x88d9, [0x1b13] = 0x88dd, [0x1b14] = 0x88f9,
-  [0x1b15] = 0x8902, [0x1b16] = 0x88fc, [0x1b17] = 0x88f4, [0x1b18] = 0x88e8,
-  [0x1b19] = 0x88f2, [0x1b1a] = 0x8904, [0x1b1b] = 0x890c, [0x1b1c] = 0x890a,
-  [0x1b1d] = 0x8913, [0x1b1e] = 0x8943, [0x1b1f] = 0x891e, [0x1b20] = 0x8925,
-  [0x1b21] = 0x892a, [0x1b22] = 0x892b, [0x1b23] = 0x8941, [0x1b24] = 0x8944,
-  [0x1b25] = 0x893b, [0x1b26] = 0x8936, [0x1b27] = 0x8938, [0x1b28] = 0x894c,
-  [0x1b29] = 0x891d, [0x1b2a] = 0x8960, [0x1b2b] = 0x895e, [0x1b2c] = 0x8966,
-  [0x1b2d] = 0x8964, [0x1b2e] = 0x896d, [0x1b2f] = 0x896a, [0x1b30] = 0x896f,
-  [0x1b31] = 0x8974, [0x1b32] = 0x8977, [0x1b33] = 0x897e, [0x1b34] = 0x8983,
-  [0x1b35] = 0x8988, [0x1b36] = 0x898a, [0x1b37] = 0x8993, [0x1b38] = 0x8998,
-  [0x1b39] = 0x89a1, [0x1b3a] = 0x89a9, [0x1b3b] = 0x89a6, [0x1b3c] = 0x89ac,
-  [0x1b3d] = 0x89af, [0x1b3e] = 0x89b2, [0x1b3f] = 0x89ba, [0x1b40] = 0x89bd,
-  [0x1b41] = 0x89bf, [0x1b42] = 0x89c0, [0x1b43] = 0x89da, [0x1b44] = 0x89dc,
-  [0x1b45] = 0x89dd, [0x1b46] = 0x89e7, [0x1b47] = 0x89f4, [0x1b48] = 0x89f8,
-  [0x1b49] = 0x8a03, [0x1b4a] = 0x8a16, [0x1b4b] = 0x8a10, [0x1b4c] = 0x8a0c,
-  [0x1b4d] = 0x8a1b, [0x1b4e] = 0x8a1d, [0x1b4f] = 0x8a25, [0x1b50] = 0x8a36,
-  [0x1b51] = 0x8a41, [0x1b52] = 0x8a5b, [0x1b53] = 0x8a52, [0x1b54] = 0x8a46,
-  [0x1b55] = 0x8a48, [0x1b56] = 0x8a7c, [0x1b57] = 0x8a6d, [0x1b58] = 0x8a6c,
-  [0x1b59] = 0x8a62, [0x1b5a] = 0x8a85, [0x1b5b] = 0x8a82, [0x1b5c] = 0x8a84,
-  [0x1b5d] = 0x8aa8, [0x1b5e] = 0x8aa1, [0x1b5f] = 0x8a91, [0x1b60] = 0x8aa5,
-  [0x1b61] = 0x8aa6, [0x1b62] = 0x8a9a, [0x1b63] = 0x8aa3, [0x1b64] = 0x8ac4,
-  [0x1b65] = 0x8acd, [0x1b66] = 0x8ac2, [0x1b67] = 0x8ada, [0x1b68] = 0x8aeb,
-  [0x1b69] = 0x8af3, [0x1b6a] = 0x8ae7, [0x1b6b] = 0x8ae4, [0x1b6c] = 0x8af1,
-  [0x1b6d] = 0x8b14, [0x1b6e] = 0x8ae0, [0x1b6f] = 0x8ae2, [0x1b70] = 0x8af7,
-  [0x1b71] = 0x8ade, [0x1b72] = 0x8adb, [0x1b73] = 0x8b0c, [0x1b74] = 0x8b07,
-  [0x1b75] = 0x8b1a, [0x1b76] = 0x8ae1, [0x1b77] = 0x8b16, [0x1b78] = 0x8b10,
-  [0x1b79] = 0x8b17, [0x1b7a] = 0x8b20, [0x1b7b] = 0x8b33, [0x1b7c] = 0x97ab,
-  [0x1b7d] = 0x8b26, [0x1b7e] = 0x8b2b, [0x1b7f] = 0x8b3e, [0x1b80] = 0x8b28,
-  [0x1b81] = 0x8b41, [0x1b82] = 0x8b4c, [0x1b83] = 0x8b4f, [0x1b84] = 0x8b4e,
-  [0x1b85] = 0x8b49, [0x1b86] = 0x8b56, [0x1b87] = 0x8b5b, [0x1b88] = 0x8b5a,
-  [0x1b89] = 0x8b6b, [0x1b8a] = 0x8b5f, [0x1b8b] = 0x8b6c, [0x1b8c] = 0x8b6f,
-  [0x1b8d] = 0x8b74, [0x1b8e] = 0x8b7d, [0x1b8f] = 0x8b80, [0x1b90] = 0x8b8c,
-  [0x1b91] = 0x8b8e, [0x1b92] = 0x8b92, [0x1b93] = 0x8b93, [0x1b94] = 0x8b96,
-  [0x1b95] = 0x8b99, [0x1b96] = 0x8b9a, [0x1b97] = 0x8c3a, [0x1b98] = 0x8c41,
-  [0x1b99] = 0x8c3f, [0x1b9a] = 0x8c48, [0x1b9b] = 0x8c4c, [0x1b9c] = 0x8c4e,
-  [0x1b9d] = 0x8c50, [0x1b9e] = 0x8c55, [0x1b9f] = 0x8c62, [0x1ba0] = 0x8c6c,
-  [0x1ba1] = 0x8c78, [0x1ba2] = 0x8c7a, [0x1ba3] = 0x8c82, [0x1ba4] = 0x8c89,
-  [0x1ba5] = 0x8c85, [0x1ba6] = 0x8c8a, [0x1ba7] = 0x8c8d, [0x1ba8] = 0x8c8e,
-  [0x1ba9] = 0x8c94, [0x1baa] = 0x8c7c, [0x1bab] = 0x8c98, [0x1bac] = 0x621d,
-  [0x1bad] = 0x8cad, [0x1bae] = 0x8caa, [0x1baf] = 0x8cbd, [0x1bb0] = 0x8cb2,
-  [0x1bb1] = 0x8cb3, [0x1bb2] = 0x8cae, [0x1bb3] = 0x8cb6, [0x1bb4] = 0x8cc8,
-  [0x1bb5] = 0x8cc1, [0x1bb6] = 0x8ce4, [0x1bb7] = 0x8ce3, [0x1bb8] = 0x8cda,
-  [0x1bb9] = 0x8cfd, [0x1bba] = 0x8cfa, [0x1bbb] = 0x8cfb, [0x1bbc] = 0x8d04,
-  [0x1bbd] = 0x8d05, [0x1bbe] = 0x8d0a, [0x1bbf] = 0x8d07, [0x1bc0] = 0x8d0f,
-  [0x1bc1] = 0x8d0d, [0x1bc2] = 0x8d10, [0x1bc3] = 0x9f4e, [0x1bc4] = 0x8d13,
-  [0x1bc5] = 0x8ccd, [0x1bc6] = 0x8d14, [0x1bc7] = 0x8d16, [0x1bc8] = 0x8d67,
-  [0x1bc9] = 0x8d6d, [0x1bca] = 0x8d71, [0x1bcb] = 0x8d73, [0x1bcc] = 0x8d81,
-  [0x1bcd] = 0x8d99, [0x1bce] = 0x8dc2, [0x1bcf] = 0x8dbe, [0x1bd0] = 0x8dba,
-  [0x1bd1] = 0x8dcf, [0x1bd2] = 0x8dda, [0x1bd3] = 0x8dd6, [0x1bd4] = 0x8dcc,
-  [0x1bd5] = 0x8ddb, [0x1bd6] = 0x8dcb, [0x1bd7] = 0x8dea, [0x1bd8] = 0x8deb,
-  [0x1bd9] = 0x8ddf, [0x1bda] = 0x8de3, [0x1bdb] = 0x8dfc, [0x1bdc] = 0x8e08,
-  [0x1bdd] = 0x8e09, [0x1bde] = 0x8dff, [0x1bdf] = 0x8e1d, [0x1be0] = 0x8e1e,
-  [0x1be1] = 0x8e10, [0x1be2] = 0x8e1f, [0x1be3] = 0x8e42, [0x1be4] = 0x8e35,
-  [0x1be5] = 0x8e30, [0x1be6] = 0x8e34, [0x1be7] = 0x8e4a, [0x1be8] = 0x8e47,
-  [0x1be9] = 0x8e49, [0x1bea] = 0x8e4c, [0x1beb] = 0x8e50, [0x1bec] = 0x8e48,
-  [0x1bed] = 0x8e59, [0x1bee] = 0x8e64, [0x1bef] = 0x8e60, [0x1bf0] = 0x8e2a,
-  [0x1bf1] = 0x8e63, [0x1bf2] = 0x8e55, [0x1bf3] = 0x8e76, [0x1bf4] = 0x8e72,
-  [0x1bf5] = 0x8e7c, [0x1bf6] = 0x8e81, [0x1bf7] = 0x8e87, [0x1bf8] = 0x8e85,
-  [0x1bf9] = 0x8e84, [0x1bfa] = 0x8e8b, [0x1bfb] = 0x8e8a, [0x1bfc] = 0x8e93,
-  [0x1bfd] = 0x8e91, [0x1bfe] = 0x8e94, [0x1bff] = 0x8e99, [0x1c00] = 0x8eaa,
-  [0x1c01] = 0x8ea1, [0x1c02] = 0x8eac, [0x1c03] = 0x8eb0, [0x1c04] = 0x8ec6,
-  [0x1c05] = 0x8eb1, [0x1c06] = 0x8ebe, [0x1c07] = 0x8ec5, [0x1c08] = 0x8ec8,
-  [0x1c09] = 0x8ecb, [0x1c0a] = 0x8edb, [0x1c0b] = 0x8ee3, [0x1c0c] = 0x8efc,
-  [0x1c0d] = 0x8efb, [0x1c0e] = 0x8eeb, [0x1c0f] = 0x8efe, [0x1c10] = 0x8f0a,
-  [0x1c11] = 0x8f05, [0x1c12] = 0x8f15, [0x1c13] = 0x8f12, [0x1c14] = 0x8f19,
-  [0x1c15] = 0x8f13, [0x1c16] = 0x8f1c, [0x1c17] = 0x8f1f, [0x1c18] = 0x8f1b,
-  [0x1c19] = 0x8f0c, [0x1c1a] = 0x8f26, [0x1c1b] = 0x8f33, [0x1c1c] = 0x8f3b,
-  [0x1c1d] = 0x8f39, [0x1c1e] = 0x8f45, [0x1c1f] = 0x8f42, [0x1c20] = 0x8f3e,
-  [0x1c21] = 0x8f4c, [0x1c22] = 0x8f49, [0x1c23] = 0x8f46, [0x1c24] = 0x8f4e,
-  [0x1c25] = 0x8f57, [0x1c26] = 0x8f5c, [0x1c27] = 0x8f62, [0x1c28] = 0x8f63,
-  [0x1c29] = 0x8f64, [0x1c2a] = 0x8f9c, [0x1c2b] = 0x8f9f, [0x1c2c] = 0x8fa3,
-  [0x1c2d] = 0x8fad, [0x1c2e] = 0x8faf, [0x1c2f] = 0x8fb7, [0x1c30] = 0x8fda,
-  [0x1c31] = 0x8fe5, [0x1c32] = 0x8fe2, [0x1c33] = 0x8fea, [0x1c34] = 0x8fef,
-  [0x1c35] = 0x9087, [0x1c36] = 0x8ff4, [0x1c37] = 0x9005, [0x1c38] = 0x8ff9,
-  [0x1c39] = 0x8ffa, [0x1c3a] = 0x9011, [0x1c3b] = 0x9015, [0x1c3c] = 0x9021,
-  [0x1c3d] = 0x900d, [0x1c3e] = 0x901e, [0x1c3f] = 0x9016, [0x1c40] = 0x900b,
-  [0x1c41] = 0x9027, [0x1c42] = 0x9036, [0x1c43] = 0x9035, [0x1c44] = 0x9039,
-  [0x1c45] = 0x8ff8, [0x1c46] = 0x904f, [0x1c47] = 0x9050, [0x1c48] = 0x9051,
-  [0x1c49] = 0x9052, [0x1c4a] = 0x900e, [0x1c4b] = 0x9049, [0x1c4c] = 0x903e,
-  [0x1c4d] = 0x9056, [0x1c4e] = 0x9058, [0x1c4f] = 0x905e, [0x1c50] = 0x9068,
-  [0x1c51] = 0x906f, [0x1c52] = 0x9076, [0x1c53] = 0x96a8, [0x1c54] = 0x9072,
-  [0x1c55] = 0x9082, [0x1c56] = 0x907d, [0x1c57] = 0x9081, [0x1c58] = 0x9080,
-  [0x1c59] = 0x908a, [0x1c5a] = 0x9089, [0x1c5b] = 0x908f, [0x1c5c] = 0x90a8,
-  [0x1c5d] = 0x90af, [0x1c5e] = 0x90b1, [0x1c5f] = 0x90b5, [0x1c60] = 0x90e2,
-  [0x1c61] = 0x90e4, [0x1c62] = 0x6248, [0x1c63] = 0x90db, [0x1c64] = 0x9102,
-  [0x1c65] = 0x9112, [0x1c66] = 0x9119, [0x1c67] = 0x9132, [0x1c68] = 0x9130,
-  [0x1c69] = 0x914a, [0x1c6a] = 0x9156, [0x1c6b] = 0x9158, [0x1c6c] = 0x9163,
-  [0x1c6d] = 0x9165, [0x1c6e] = 0x9169, [0x1c6f] = 0x9173, [0x1c70] = 0x9172,
-  [0x1c71] = 0x918b, [0x1c72] = 0x9189, [0x1c73] = 0x9182, [0x1c74] = 0x91a2,
-  [0x1c75] = 0x91ab, [0x1c76] = 0x91af, [0x1c77] = 0x91aa, [0x1c78] = 0x91b5,
-  [0x1c79] = 0x91b4, [0x1c7a] = 0x91ba, [0x1c7b] = 0x91c0, [0x1c7c] = 0x91c1,
-  [0x1c7d] = 0x91c9, [0x1c7e] = 0x91cb, [0x1c7f] = 0x91d0, [0x1c80] = 0x91d6,
-  [0x1c81] = 0x91df, [0x1c82] = 0x91e1, [0x1c83] = 0x91db, [0x1c84] = 0x91fc,
-  [0x1c85] = 0x91f5, [0x1c86] = 0x91f6, [0x1c87] = 0x921e, [0x1c88] = 0x91ff,
-  [0x1c89] = 0x9214, [0x1c8a] = 0x922c, [0x1c8b] = 0x9215, [0x1c8c] = 0x9211,
-  [0x1c8d] = 0x925e, [0x1c8e] = 0x9257, [0x1c8f] = 0x9245, [0x1c90] = 0x9249,
-  [0x1c91] = 0x9264, [0x1c92] = 0x9248, [0x1c93] = 0x9295, [0x1c94] = 0x923f,
-  [0x1c95] = 0x924b, [0x1c96] = 0x9250, [0x1c97] = 0x929c, [0x1c98] = 0x9296,
-  [0x1c99] = 0x9293, [0x1c9a] = 0x929b, [0x1c9b] = 0x925a, [0x1c9c] = 0x92cf,
-  [0x1c9d] = 0x92b9, [0x1c9e] = 0x92b7, [0x1c9f] = 0x92e9, [0x1ca0] = 0x930f,
-  [0x1ca1] = 0x92fa, [0x1ca2] = 0x9344, [0x1ca3] = 0x932e, [0x1ca4] = 0x9319,
-  [0x1ca5] = 0x9322, [0x1ca6] = 0x931a, [0x1ca7] = 0x9323, [0x1ca8] = 0x933a,
-  [0x1ca9] = 0x9335, [0x1caa] = 0x933b, [0x1cab] = 0x935c, [0x1cac] = 0x9360,
-  [0x1cad] = 0x937c, [0x1cae] = 0x936e, [0x1caf] = 0x9356, [0x1cb0] = 0x93b0,
-  [0x1cb1] = 0x93ac, [0x1cb2] = 0x93ad, [0x1cb3] = 0x9394, [0x1cb4] = 0x93b9,
-  [0x1cb5] = 0x93d6, [0x1cb6] = 0x93d7, [0x1cb7] = 0x93e8, [0x1cb8] = 0x93e5,
-  [0x1cb9] = 0x93d8, [0x1cba] = 0x93c3, [0x1cbb] = 0x93dd, [0x1cbc] = 0x93d0,
-  [0x1cbd] = 0x93c8, [0x1cbe] = 0x93e4, [0x1cbf] = 0x941a, [0x1cc0] = 0x9414,
-  [0x1cc1] = 0x9413, [0x1cc2] = 0x9403, [0x1cc3] = 0x9407, [0x1cc4] = 0x9410,
-  [0x1cc5] = 0x9436, [0x1cc6] = 0x942b, [0x1cc7] = 0x9435, [0x1cc8] = 0x9421,
-  [0x1cc9] = 0x943a, [0x1cca] = 0x9441, [0x1ccb] = 0x9452, [0x1ccc] = 0x9444,
-  [0x1ccd] = 0x945b, [0x1cce] = 0x9460, [0x1ccf] = 0x9462, [0x1cd0] = 0x945e,
-  [0x1cd1] = 0x946a, [0x1cd2] = 0x9229, [0x1cd3] = 0x9470, [0x1cd4] = 0x9475,
-  [0x1cd5] = 0x9477, [0x1cd6] = 0x947d, [0x1cd7] = 0x945a, [0x1cd8] = 0x947c,
-  [0x1cd9] = 0x947e, [0x1cda] = 0x9481, [0x1cdb] = 0x947f, [0x1cdc] = 0x9582,
-  [0x1cdd] = 0x9587, [0x1cde] = 0x958a, [0x1cdf] = 0x9594, [0x1ce0] = 0x9596,
-  [0x1ce1] = 0x9598, [0x1ce2] = 0x9599, [0x1ce3] = 0x95a0, [0x1ce4] = 0x95a8,
-  [0x1ce5] = 0x95a7, [0x1ce6] = 0x95ad, [0x1ce7] = 0x95bc, [0x1ce8] = 0x95bb,
-  [0x1ce9] = 0x95b9, [0x1cea] = 0x95be, [0x1ceb] = 0x95ca, [0x1cec] = 0x6ff6,
-  [0x1ced] = 0x95c3, [0x1cee] = 0x95cd, [0x1cef] = 0x95cc, [0x1cf0] = 0x95d5,
-  [0x1cf1] = 0x95d4, [0x1cf2] = 0x95d6, [0x1cf3] = 0x95dc, [0x1cf4] = 0x95e1,
-  [0x1cf5] = 0x95e5, [0x1cf6] = 0x95e2, [0x1cf7] = 0x9621, [0x1cf8] = 0x9628,
-  [0x1cf9] = 0x962e, [0x1cfa] = 0x962f, [0x1cfb] = 0x9642, [0x1cfc] = 0x964c,
-  [0x1cfd] = 0x964f, [0x1cfe] = 0x964b, [0x1cff] = 0x9677, [0x1d00] = 0x965c,
-  [0x1d01] = 0x965e, [0x1d02] = 0x965d, [0x1d03] = 0x965f, [0x1d04] = 0x9666,
-  [0x1d05] = 0x9672, [0x1d06] = 0x966c, [0x1d07] = 0x968d, [0x1d08] = 0x9698,
-  [0x1d09] = 0x9695, [0x1d0a] = 0x9697, [0x1d0b] = 0x96aa, [0x1d0c] = 0x96a7,
-  [0x1d0d] = 0x96b1, [0x1d0e] = 0x96b2, [0x1d0f] = 0x96b0, [0x1d10] = 0x96b4,
-  [0x1d11] = 0x96b6, [0x1d12] = 0x96b8, [0x1d13] = 0x96b9, [0x1d14] = 0x96ce,
-  [0x1d15] = 0x96cb, [0x1d16] = 0x96c9, [0x1d17] = 0x96cd, [0x1d18] = 0x894d,
-  [0x1d19] = 0x96dc, [0x1d1a] = 0x970d, [0x1d1b] = 0x96d5, [0x1d1c] = 0x96f9,
-  [0x1d1d] = 0x9704, [0x1d1e] = 0x9706, [0x1d1f] = 0x9708, [0x1d20] = 0x9713,
-  [0x1d21] = 0x970e, [0x1d22] = 0x9711, [0x1d23] = 0x970f, [0x1d24] = 0x9716,
-  [0x1d25] = 0x9719, [0x1d26] = 0x9724, [0x1d27] = 0x972a, [0x1d28] = 0x9730,
-  [0x1d29] = 0x9739, [0x1d2a] = 0x973d, [0x1d2b] = 0x973e, [0x1d2c] = 0x9744,
-  [0x1d2d] = 0x9746, [0x1d2e] = 0x9748, [0x1d2f] = 0x9742, [0x1d30] = 0x9749,
-  [0x1d31] = 0x975c, [0x1d32] = 0x9760, [0x1d33] = 0x9764, [0x1d34] = 0x9766,
-  [0x1d35] = 0x9768, [0x1d36] = 0x52d2, [0x1d37] = 0x976b, [0x1d38] = 0x9771,
-  [0x1d39] = 0x9779, [0x1d3a] = 0x9785, [0x1d3b] = 0x977c, [0x1d3c] = 0x9781,
-  [0x1d3d] = 0x977a, [0x1d3e] = 0x9786, [0x1d3f] = 0x978b, [0x1d40] = 0x978f,
-  [0x1d41] = 0x9790, [0x1d42] = 0x979c, [0x1d43] = 0x97a8, [0x1d44] = 0x97a6,
-  [0x1d45] = 0x97a3, [0x1d46] = 0x97b3, [0x1d47] = 0x97b4, [0x1d48] = 0x97c3,
-  [0x1d49] = 0x97c6, [0x1d4a] = 0x97c8, [0x1d4b] = 0x97cb, [0x1d4c] = 0x97dc,
-  [0x1d4d] = 0x97ed, [0x1d4e] = 0x9f4f, [0x1d4f] = 0x97f2, [0x1d50] = 0x7adf,
-  [0x1d51] = 0x97f6, [0x1d52] = 0x97f5, [0x1d53] = 0x980f, [0x1d54] = 0x980c,
-  [0x1d55] = 0x9838, [0x1d56] = 0x9824, [0x1d57] = 0x9821, [0x1d58] = 0x9837,
-  [0x1d59] = 0x983d, [0x1d5a] = 0x9846, [0x1d5b] = 0x984f, [0x1d5c] = 0x984b,
-  [0x1d5d] = 0x986b, [0x1d5e] = 0x986f, [0x1d5f] = 0x9870, [0x1d60] = 0x9871,
-  [0x1d61] = 0x9874, [0x1d62] = 0x9873, [0x1d63] = 0x98aa, [0x1d64] = 0x98af,
-  [0x1d65] = 0x98b1, [0x1d66] = 0x98b6, [0x1d67] = 0x98c4, [0x1d68] = 0x98c3,
-  [0x1d69] = 0x98c6, [0x1d6a] = 0x98e9, [0x1d6b] = 0x98eb, [0x1d6c] = 0x9903,
-  [0x1d6d] = 0x9909, [0x1d6e] = 0x9912, [0x1d6f] = 0x9914, [0x1d70] = 0x9918,
-  [0x1d71] = 0x9921, [0x1d72] = 0x991d, [0x1d73] = 0x991e, [0x1d74] = 0x9924,
-  [0x1d75] = 0x9920, [0x1d76] = 0x992c, [0x1d77] = 0x992e, [0x1d78] = 0x993d,
-  [0x1d79] = 0x993e, [0x1d7a] = 0x9942, [0x1d7b] = 0x9949, [0x1d7c] = 0x9945,
-  [0x1d7d] = 0x9950, [0x1d7e] = 0x994b, [0x1d7f] = 0x9951, [0x1d80] = 0x9952,
-  [0x1d81] = 0x994c, [0x1d82] = 0x9955, [0x1d83] = 0x9997, [0x1d84] = 0x9998,
-  [0x1d85] = 0x99a5, [0x1d86] = 0x99ad, [0x1d87] = 0x99ae, [0x1d88] = 0x99bc,
-  [0x1d89] = 0x99df, [0x1d8a] = 0x99db, [0x1d8b] = 0x99dd, [0x1d8c] = 0x99d8,
-  [0x1d8d] = 0x99d1, [0x1d8e] = 0x99ed, [0x1d8f] = 0x99ee, [0x1d90] = 0x99f1,
-  [0x1d91] = 0x99f2, [0x1d92] = 0x99fb, [0x1d93] = 0x99f8, [0x1d94] = 0x9a01,
-  [0x1d95] = 0x9a0f, [0x1d96] = 0x9a05, [0x1d97] = 0x99e2, [0x1d98] = 0x9a19,
-  [0x1d99] = 0x9a2b, [0x1d9a] = 0x9a37, [0x1d9b] = 0x9a45, [0x1d9c] = 0x9a42,
-  [0x1d9d] = 0x9a40, [0x1d9e] = 0x9a43, [0x1d9f] = 0x9a3e, [0x1da0] = 0x9a55,
-  [0x1da1] = 0x9a4d, [0x1da2] = 0x9a5b, [0x1da3] = 0x9a57, [0x1da4] = 0x9a5f,
-  [0x1da5] = 0x9a62, [0x1da6] = 0x9a65, [0x1da7] = 0x9a64, [0x1da8] = 0x9a69,
-  [0x1da9] = 0x9a6b, [0x1daa] = 0x9a6a, [0x1dab] = 0x9aad, [0x1dac] = 0x9ab0,
-  [0x1dad] = 0x9abc, [0x1dae] = 0x9ac0, [0x1daf] = 0x9acf, [0x1db0] = 0x9ad1,
-  [0x1db1] = 0x9ad3, [0x1db2] = 0x9ad4, [0x1db3] = 0x9ade, [0x1db4] = 0x9adf,
-  [0x1db5] = 0x9ae2, [0x1db6] = 0x9ae3, [0x1db7] = 0x9ae6, [0x1db8] = 0x9aef,
-  [0x1db9] = 0x9aeb, [0x1dba] = 0x9aee, [0x1dbb] = 0x9af4, [0x1dbc] = 0x9af1,
-  [0x1dbd] = 0x9af7, [0x1dbe] = 0x9afb, [0x1dbf] = 0x9b06, [0x1dc0] = 0x9b18,
-  [0x1dc1] = 0x9b1a, [0x1dc2] = 0x9b1f, [0x1dc3] = 0x9b22, [0x1dc4] = 0x9b23,
-  [0x1dc5] = 0x9b25, [0x1dc6] = 0x9b27, [0x1dc7] = 0x9b28, [0x1dc8] = 0x9b29,
-  [0x1dc9] = 0x9b2a, [0x1dca] = 0x9b2e, [0x1dcb] = 0x9b2f, [0x1dcc] = 0x9b32,
-  [0x1dcd] = 0x9b44, [0x1dce] = 0x9b43, [0x1dcf] = 0x9b4f, [0x1dd0] = 0x9b4d,
-  [0x1dd1] = 0x9b4e, [0x1dd2] = 0x9b51, [0x1dd3] = 0x9b58, [0x1dd4] = 0x9b74,
-  [0x1dd5] = 0x9b93, [0x1dd6] = 0x9b83, [0x1dd7] = 0x9b91, [0x1dd8] = 0x9b96,
-  [0x1dd9] = 0x9b97, [0x1dda] = 0x9b9f, [0x1ddb] = 0x9ba0, [0x1ddc] = 0x9ba8,
-  [0x1ddd] = 0x9bb4, [0x1dde] = 0x9bc0, [0x1ddf] = 0x9bca, [0x1de0] = 0x9bb9,
-  [0x1de1] = 0x9bc6, [0x1de2] = 0x9bcf, [0x1de3] = 0x9bd1, [0x1de4] = 0x9bd2,
-  [0x1de5] = 0x9be3, [0x1de6] = 0x9be2, [0x1de7] = 0x9be4, [0x1de8] = 0x9bd4,
-  [0x1de9] = 0x9be1, [0x1dea] = 0x9c3a, [0x1deb] = 0x9bf2, [0x1dec] = 0x9bf1,
-  [0x1ded] = 0x9bf0, [0x1dee] = 0x9c15, [0x1def] = 0x9c14, [0x1df0] = 0x9c09,
-  [0x1df1] = 0x9c13, [0x1df2] = 0x9c0c, [0x1df3] = 0x9c06, [0x1df4] = 0x9c08,
-  [0x1df5] = 0x9c12, [0x1df6] = 0x9c0a, [0x1df7] = 0x9c04, [0x1df8] = 0x9c2e,
-  [0x1df9] = 0x9c1b, [0x1dfa] = 0x9c25, [0x1dfb] = 0x9c24, [0x1dfc] = 0x9c21,
-  [0x1dfd] = 0x9c30, [0x1dfe] = 0x9c47, [0x1dff] = 0x9c32, [0x1e00] = 0x9c46,
-  [0x1e01] = 0x9c3e, [0x1e02] = 0x9c5a, [0x1e03] = 0x9c60, [0x1e04] = 0x9c67,
-  [0x1e05] = 0x9c76, [0x1e06] = 0x9c78, [0x1e07] = 0x9ce7, [0x1e08] = 0x9cec,
-  [0x1e09] = 0x9cf0, [0x1e0a] = 0x9d09, [0x1e0b] = 0x9d08, [0x1e0c] = 0x9ceb,
-  [0x1e0d] = 0x9d03, [0x1e0e] = 0x9d06, [0x1e0f] = 0x9d2a, [0x1e10] = 0x9d26,
-  [0x1e11] = 0x9daf, [0x1e12] = 0x9d23, [0x1e13] = 0x9d1f, [0x1e14] = 0x9d44,
-  [0x1e15] = 0x9d15, [0x1e16] = 0x9d12, [0x1e17] = 0x9d41, [0x1e18] = 0x9d3f,
-  [0x1e19] = 0x9d3e, [0x1e1a] = 0x9d46, [0x1e1b] = 0x9d48, [0x1e1c] = 0x9d5d,
-  [0x1e1d] = 0x9d5e, [0x1e1e] = 0x9d64, [0x1e1f] = 0x9d51, [0x1e20] = 0x9d50,
-  [0x1e21] = 0x9d59, [0x1e22] = 0x9d72, [0x1e23] = 0x9d89, [0x1e24] = 0x9d87,
-  [0x1e25] = 0x9dab, [0x1e26] = 0x9d6f, [0x1e27] = 0x9d7a, [0x1e28] = 0x9d9a,
-  [0x1e29] = 0x9da4, [0x1e2a] = 0x9da9, [0x1e2b] = 0x9db2, [0x1e2c] = 0x9dc4,
-  [0x1e2d] = 0x9dc1, [0x1e2e] = 0x9dbb, [0x1e2f] = 0x9db8, [0x1e30] = 0x9dba,
-  [0x1e31] = 0x9dc6, [0x1e32] = 0x9dcf, [0x1e33] = 0x9dc2, [0x1e34] = 0x9dd9,
-  [0x1e35] = 0x9dd3, [0x1e36] = 0x9df8, [0x1e37] = 0x9de6, [0x1e38] = 0x9ded,
-  [0x1e39] = 0x9def, [0x1e3a] = 0x9dfd, [0x1e3b] = 0x9e1a, [0x1e3c] = 0x9e1b,
-  [0x1e3d] = 0x9e1e, [0x1e3e] = 0x9e75, [0x1e3f] = 0x9e79, [0x1e40] = 0x9e7d,
-  [0x1e41] = 0x9e81, [0x1e42] = 0x9e88, [0x1e43] = 0x9e8b, [0x1e44] = 0x9e8c,
-  [0x1e45] = 0x9e92, [0x1e46] = 0x9e95, [0x1e47] = 0x9e91, [0x1e48] = 0x9e9d,
-  [0x1e49] = 0x9ea5, [0x1e4a] = 0x9ea9, [0x1e4b] = 0x9eb8, [0x1e4c] = 0x9eaa,
-  [0x1e4d] = 0x9ead, [0x1e4e] = 0x9761, [0x1e4f] = 0x9ecc, [0x1e50] = 0x9ece,
-  [0x1e51] = 0x9ecf, [0x1e52] = 0x9ed0, [0x1e53] = 0x9ed4, [0x1e54] = 0x9edc,
-  [0x1e55] = 0x9ede, [0x1e56] = 0x9edd, [0x1e57] = 0x9ee0, [0x1e58] = 0x9ee5,
-  [0x1e59] = 0x9ee8, [0x1e5a] = 0x9eef, [0x1e5b] = 0x9ef4, [0x1e5c] = 0x9ef6,
-  [0x1e5d] = 0x9ef7, [0x1e5e] = 0x9ef9, [0x1e5f] = 0x9efb, [0x1e60] = 0x9efc,
-  [0x1e61] = 0x9efd, [0x1e62] = 0x9f07, [0x1e63] = 0x9f08, [0x1e64] = 0x76b7,
-  [0x1e65] = 0x9f15, [0x1e66] = 0x9f21, [0x1e67] = 0x9f2c, [0x1e68] = 0x9f3e,
-  [0x1e69] = 0x9f4a, [0x1e6a] = 0x9f52, [0x1e6b] = 0x9f54, [0x1e6c] = 0x9f63,
-  [0x1e6d] = 0x9f5f, [0x1e6e] = 0x9f60, [0x1e6f] = 0x9f61, [0x1e70] = 0x9f66,
-  [0x1e71] = 0x9f67, [0x1e72] = 0x9f6c, [0x1e73] = 0x9f6a, [0x1e74] = 0x9f77,
-  [0x1e75] = 0x9f72, [0x1e76] = 0x9f76, [0x1e77] = 0x9f95, [0x1e78] = 0x9f9c,
-  [0x1e79] = 0x9fa0, [0x1e7a] = 0x582f, [0x1e7b] = 0x69c7, [0x1e7c] = 0x9059,
-  [0x1e7d] = 0x7464, [0x1e7e] = 0x51dc, [0x1e7f] = 0x7199
-};
-
-
-const char __jisx0208_from_ucs4_lat1[256][2] =
-{
-  [0x005C] = "\x21\x40", [0x00A2] = "\x21\x71", [0x00A3] = "\x21\x72",
-  [0x00A7] = "\x21\x78", [0x00A8] = "\x21\x2f", [0x00AC] = "\x22\x4c",
-  [0x00B0] = "\x21\x6B", [0x00B1] = "\x21\x5e", [0x00B4] = "\x21\x2d",
-  [0x00B6] = "\x22\x79", [0x00D7] = "\x21\x5f", [0x00F7] = "\x21\x60"
-};
-
-
-/* The following table can be generated using
-
-   egrep '^0x' < .../eastasia/jis/jis0208.txt |
-   awk '{ print $3, $2}' | egrep '^0x0[34]' | sort -u | perl tab.pl
-
-   where tab.pl contains:
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=0;
-   while (<>) {
-     local($ucs4, $jis, %rest) = split;
-     local($u)=hex($ucs4);
-     local($s)=hex($jis);
-     printf ("\n ") if ($n % 3 eq 0);
-     ++$n;
-     printf (" [0x%02x] = \"\\x%02x\\x%02x\",",
-	     int(($u - 0x391) / 256) * 94 + (($u - 0x391) & 0xff),
-	     int($s/256), $s % 256);
-   }
-   printf ("\n");
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const char __jisx0208_from_ucs4_greek[0xc1][2] =
-{
-  [0x00] = "\x26\x21", [0x01] = "\x26\x22", [0x02] = "\x26\x23",
-  [0x03] = "\x26\x24", [0x04] = "\x26\x25", [0x05] = "\x26\x26",
-  [0x06] = "\x26\x27", [0x07] = "\x26\x28", [0x08] = "\x26\x29",
-  [0x09] = "\x26\x2a", [0x0a] = "\x26\x2b", [0x0b] = "\x26\x2c",
-  [0x0c] = "\x26\x2d", [0x0d] = "\x26\x2e", [0x0e] = "\x26\x2f",
-  [0x0f] = "\x26\x30", [0x10] = "\x26\x31", [0x12] = "\x26\x32",
-  [0x13] = "\x26\x33", [0x14] = "\x26\x34", [0x15] = "\x26\x35",
-  [0x16] = "\x26\x36", [0x17] = "\x26\x37", [0x18] = "\x26\x38",
-  [0x20] = "\x26\x41", [0x21] = "\x26\x42", [0x22] = "\x26\x43",
-  [0x23] = "\x26\x44", [0x24] = "\x26\x45", [0x25] = "\x26\x46",
-  [0x26] = "\x26\x47", [0x27] = "\x26\x48", [0x28] = "\x26\x49",
-  [0x29] = "\x26\x4a", [0x2a] = "\x26\x4b", [0x2b] = "\x26\x4c",
-  [0x2c] = "\x26\x4d", [0x2d] = "\x26\x4e", [0x2e] = "\x26\x4f",
-  [0x2f] = "\x26\x50", [0x30] = "\x26\x51", [0x32] = "\x26\x52",
-  [0x33] = "\x26\x53", [0x34] = "\x26\x54", [0x35] = "\x26\x55",
-  [0x36] = "\x26\x56", [0x37] = "\x26\x57", [0x38] = "\x26\x58",
-  [0x70] = "\x27\x27", [0x7f] = "\x27\x21", [0x80] = "\x27\x22",
-  [0x81] = "\x27\x23", [0x82] = "\x27\x24", [0x83] = "\x27\x25",
-  [0x84] = "\x27\x26", [0x85] = "\x27\x28", [0x86] = "\x27\x29",
-  [0x87] = "\x27\x2a", [0x88] = "\x27\x2b", [0x89] = "\x27\x2c",
-  [0x8a] = "\x27\x2d", [0x8b] = "\x27\x2e", [0x8c] = "\x27\x2f",
-  [0x8d] = "\x27\x30", [0x8e] = "\x27\x31", [0x8f] = "\x27\x32",
-  [0x90] = "\x27\x33", [0x91] = "\x27\x34", [0x92] = "\x27\x35",
-  [0x93] = "\x27\x36", [0x94] = "\x27\x37", [0x95] = "\x27\x38",
-  [0x96] = "\x27\x39", [0x97] = "\x27\x3a", [0x98] = "\x27\x3b",
-  [0x99] = "\x27\x3c", [0x9a] = "\x27\x3d", [0x9b] = "\x27\x3e",
-  [0x9c] = "\x27\x3f", [0x9d] = "\x27\x40", [0x9e] = "\x27\x41",
-  [0x9f] = "\x27\x51", [0xa0] = "\x27\x52", [0xa1] = "\x27\x53",
-  [0xa2] = "\x27\x54", [0xa3] = "\x27\x55", [0xa4] = "\x27\x56",
-  [0xa5] = "\x27\x58", [0xa6] = "\x27\x59", [0xa7] = "\x27\x5a",
-  [0xa8] = "\x27\x5b", [0xa9] = "\x27\x5c", [0xaa] = "\x27\x5d",
-  [0xab] = "\x27\x5e", [0xac] = "\x27\x5f", [0xad] = "\x27\x60",
-  [0xae] = "\x27\x61", [0xaf] = "\x27\x62", [0xb0] = "\x27\x63",
-  [0xb1] = "\x27\x64", [0xb2] = "\x27\x65", [0xb3] = "\x27\x66",
-  [0xb4] = "\x27\x67", [0xb5] = "\x27\x68", [0xb6] = "\x27\x69",
-  [0xb7] = "\x27\x6a", [0xb8] = "\x27\x6b", [0xb9] = "\x27\x6c",
-  [0xba] = "\x27\x6d", [0xbb] = "\x27\x6e", [0xbc] = "\x27\x6f",
-  [0xbd] = "\x27\x70", [0xbe] = "\x27\x71", [0xc0] = "\x27\x57"
-};
-
-
-/* The mapping of all the other UCS values is quite difficult since they
-   are distributed from 0x2010 upto to 0xffe5.  There are many gaps with
-   unpredictable place and size.  Therefore we use a table which maps
-   ranges to idexes in a table.  This table ca be generated with:
-
-   egrep '^0x' < .../eastasia/jis/jis0208.txt | awk '{ print $3, $2}' |
-   egrep '^0x[^01]' | sort -u | perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $first=$last=$idx=0;
-   while (<>) {
-     local($ucs,$jis,%rest) = split;
-     local($u)=hex($ucs);
-     if ($u - $last > 6) {
-       if ($last != 0) {
-	 printf (" { start: %#06x, end: %#06x, idx: %5d },\n",
-		 $first, $last, $idx);
-	 $idx += $last - $first + 1;
-       }
-       $first=$u;
-     }
-     $last=$u;
-   }
-   printf (" { start: %#06x, end: %#06x, idx: %5d }\n",
-	   $first, $last, $idx);
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-
-const struct jisx0208_ucs_idx __jisx0208_from_ucs_idx[] =
-{
-  { start: 0x2010, end: 0x2026, idx:     0 },
-  { start: 0x2030, end: 0x2033, idx:    23 },
-  { start: 0x203b, end: 0x203b, idx:    27 },
-  { start: 0x2103, end: 0x2103, idx:    28 },
-  { start: 0x212b, end: 0x212b, idx:    29 },
-  { start: 0x2190, end: 0x2193, idx:    30 },
-  { start: 0x21d2, end: 0x21d4, idx:    34 },
-  { start: 0x2200, end: 0x220b, idx:    37 },
-  { start: 0x2212, end: 0x2212, idx:    49 },
-  { start: 0x221a, end: 0x2220, idx:    50 },
-  { start: 0x2227, end: 0x222c, idx:    57 },
-  { start: 0x2234, end: 0x2235, idx:    63 },
-  { start: 0x223d, end: 0x223d, idx:    65 },
-  { start: 0x2252, end: 0x2252, idx:    66 },
-  { start: 0x2260, end: 0x226b, idx:    67 },
-  { start: 0x2282, end: 0x2287, idx:    79 },
-  { start: 0x22a5, end: 0x22a5, idx:    85 },
-  { start: 0x2312, end: 0x2312, idx:    86 },
-  { start: 0x2500, end: 0x2503, idx:    87 },
-  { start: 0x250c, end: 0x2542, idx:    91 },
-  { start: 0x254b, end: 0x254b, idx:   146 },
-  { start: 0x25a0, end: 0x25a1, idx:   147 },
-  { start: 0x25b2, end: 0x25b3, idx:   149 },
-  { start: 0x25bc, end: 0x25bd, idx:   151 },
-  { start: 0x25c6, end: 0x25cf, idx:   153 },
-  { start: 0x25ef, end: 0x25ef, idx:   163 },
-  { start: 0x2605, end: 0x2606, idx:   164 },
-  { start: 0x2640, end: 0x2642, idx:   166 },
-  { start: 0x266a, end: 0x266f, idx:   169 },
-  { start: 0x3000, end: 0x3015, idx:   175 },
-  { start: 0x301c, end: 0x301c, idx:   197 },
-  { start: 0x3041, end: 0x3093, idx:   198 },
-  { start: 0x309b, end: 0x30fe, idx:   281 },
-  { start: 0x4e00, end: 0x4e62, idx:   381 },
-  { start: 0x4e71, end: 0x4e73, idx:   480 },
-  { start: 0x4e7e, end: 0x4ee5, idx:   483 },
-  { start: 0x4eed, end: 0x4f01, idx:   587 },
-  { start: 0x4f09, end: 0x4f11, idx:   608 },
-  { start: 0x4f1a, end: 0x4f1d, idx:   617 },
-  { start: 0x4f2f, end: 0x4f5e, idx:   621 },
-  { start: 0x4f69, end: 0x4fa1, idx:   669 },
-  { start: 0x4fab, end: 0x4fb6, idx:   726 },
-  { start: 0x4fbf, end: 0x4fe5, idx:   738 },
-  { start: 0x4fee, end: 0x4ffe, idx:   777 },
-  { start: 0x5005, end: 0x502d, idx:   794 },
-  { start: 0x5036, end: 0x5039, idx:   835 },
-  { start: 0x5043, end: 0x505c, idx:   839 },
-  { start: 0x5065, end: 0x5065, idx:   865 },
-  { start: 0x506c, end: 0x5085, idx:   866 },
-  { start: 0x508d, end: 0x5091, idx:   892 },
-  { start: 0x5098, end: 0x509a, idx:   897 },
-  { start: 0x50ac, end: 0x50b7, idx:   900 },
-  { start: 0x50be, end: 0x50ee, idx:   912 },
-  { start: 0x50f5, end: 0x5109, idx:   961 },
-  { start: 0x5112, end: 0x5121, idx:   982 },
-  { start: 0x512a, end: 0x512a, idx:   998 },
-  { start: 0x5132, end: 0x5199, idx:   999 },
-  { start: 0x51a0, end: 0x51bd, idx:  1103 },
-  { start: 0x51c4, end: 0x51cd, idx:  1133 },
-  { start: 0x51d6, end: 0x521d, idx:  1143 },
-  { start: 0x5224, end: 0x523b, idx:  1215 },
-  { start: 0x5243, end: 0x5275, idx:  1239 },
-  { start: 0x527d, end: 0x5294, idx:  1290 },
-  { start: 0x529b, end: 0x52e7, idx:  1314 },
-  { start: 0x52f2, end: 0x5323, idx:  1391 },
-  { start: 0x532a, end: 0x5384, idx:  1441 },
-  { start: 0x5396, end: 0x53bb, idx:  1532 },
-  { start: 0x53c2, end: 0x53fa, idx:  1570 },
-  { start: 0x5401, end: 0x5411, idx:  1627 },
-  { start: 0x541b, end: 0x542e, idx:  1644 },
-  { start: 0x5436, end: 0x5451, idx:  1664 },
-  { start: 0x545f, end: 0x545f, idx:  1692 },
-  { start: 0x5468, end: 0x5492, idx:  1693 },
-  { start: 0x54a2, end: 0x54c9, idx:  1736 },
-  { start: 0x54d8, end: 0x54d8, idx:  1776 },
-  { start: 0x54e1, end: 0x54f2, idx:  1777 },
-  { start: 0x54fa, end: 0x54fd, idx:  1795 },
-  { start: 0x5504, end: 0x5507, idx:  1799 },
-  { start: 0x550f, end: 0x5516, idx:  1803 },
-  { start: 0x552e, end: 0x5563, idx:  1811 },
-  { start: 0x557b, end: 0x558b, idx:  1865 },
-  { start: 0x5598, end: 0x559f, idx:  1882 },
-  { start: 0x55a7, end: 0x55b6, idx:  1890 },
-  { start: 0x55c4, end: 0x55c7, idx:  1906 },
-  { start: 0x55d4, end: 0x55e4, idx:  1910 },
-  { start: 0x55f7, end: 0x55fe, idx:  1927 },
-  { start: 0x5606, end: 0x5609, idx:  1935 },
-  { start: 0x5614, end: 0x561b, idx:  1939 },
-  { start: 0x5629, end: 0x5638, idx:  1947 },
-  { start: 0x5642, end: 0x5642, idx:  1963 },
-  { start: 0x564c, end: 0x5650, idx:  1964 },
-  { start: 0x565b, end: 0x565b, idx:  1969 },
-  { start: 0x5664, end: 0x566c, idx:  1970 },
-  { start: 0x5674, end: 0x5694, idx:  1979 },
-  { start: 0x56a0, end: 0x56a5, idx:  2012 },
-  { start: 0x56ae, end: 0x56e3, idx:  2018 },
-  { start: 0x56ee, end: 0x571f, idx:  2072 },
-  { start: 0x5726, end: 0x5730, idx:  2122 },
-  { start: 0x5737, end: 0x5751, idx:  2133 },
-  { start: 0x5761, end: 0x576a, idx:  2160 },
-  { start: 0x577f, end: 0x578b, idx:  2170 },
-  { start: 0x5793, end: 0x5793, idx:  2183 },
-  { start: 0x57a0, end: 0x57b3, idx:  2184 },
-  { start: 0x57c0, end: 0x57e3, idx:  2204 },
-  { start: 0x57f4, end: 0x580b, idx:  2240 },
-  { start: 0x5815, end: 0x5841, idx:  2264 },
-  { start: 0x584a, end: 0x5862, idx:  2309 },
-  { start: 0x5869, end: 0x5885, idx:  2334 },
-  { start: 0x5893, end: 0x589f, idx:  2363 },
-  { start: 0x58a8, end: 0x5902, idx:  2376 },
-  { start: 0x5909, end: 0x59b2, idx:  2467 },
-  { start: 0x59b9, end: 0x59be, idx:  2637 },
-  { start: 0x59c6, end: 0x59dc, idx:  2643 },
-  { start: 0x59e5, end: 0x59eb, idx:  2666 },
-  { start: 0x59f6, end: 0x5a09, idx:  2673 },
-  { start: 0x5a11, end: 0x5a11, idx:  2693 },
-  { start: 0x5a18, end: 0x5a49, idx:  2694 },
-  { start: 0x5a5a, end: 0x5a5a, idx:  2744 },
-  { start: 0x5a62, end: 0x5a6c, idx:  2745 },
-  { start: 0x5a7f, end: 0x5a7f, idx:  2756 },
-  { start: 0x5a92, end: 0x5a92, idx:  2757 },
-  { start: 0x5a9a, end: 0x5a9b, idx:  2758 },
-  { start: 0x5abc, end: 0x5ac2, idx:  2760 },
-  { start: 0x5ac9, end: 0x5ad7, idx:  2767 },
-  { start: 0x5ae1, end: 0x5ae9, idx:  2782 },
-  { start: 0x5afa, end: 0x5afb, idx:  2791 },
-  { start: 0x5b09, end: 0x5b0c, idx:  2793 },
-  { start: 0x5b16, end: 0x5b16, idx:  2797 },
-  { start: 0x5b22, end: 0x5b22, idx:  2798 },
-  { start: 0x5b2a, end: 0x5b36, idx:  2799 },
-  { start: 0x5b3e, end: 0x5b45, idx:  2812 },
-  { start: 0x5b50, end: 0x5ba6, idx:  2820 },
-  { start: 0x5bae, end: 0x5bd4, idx:  2907 },
-  { start: 0x5bdb, end: 0x5c31, idx:  2946 },
-  { start: 0x5c38, end: 0x5c55, idx:  3033 },
-  { start: 0x5c5e, end: 0x5c65, idx:  3063 },
-  { start: 0x5c6c, end: 0x5c79, idx:  3071 },
-  { start: 0x5c8c, end: 0x5c94, idx:  3085 },
-  { start: 0x5ca1, end: 0x5ca1, idx:  3094 },
-  { start: 0x5ca8, end: 0x5cbe, idx:  3095 },
-  { start: 0x5cc5, end: 0x5cc7, idx:  3118 },
-  { start: 0x5cd9, end: 0x5cd9, idx:  3121 },
-  { start: 0x5ce0, end: 0x5ce1, idx:  3122 },
-  { start: 0x5ce8, end: 0x5cfd, idx:  3124 },
-  { start: 0x5d07, end: 0x5d22, idx:  3146 },
-  { start: 0x5d29, end: 0x5d29, idx:  3174 },
-  { start: 0x5d4b, end: 0x5d52, idx:  3175 },
-  { start: 0x5d5c, end: 0x5d5c, idx:  3183 },
-  { start: 0x5d69, end: 0x5d76, idx:  3184 },
-  { start: 0x5d82, end: 0x5d90, idx:  3198 },
-  { start: 0x5d9d, end: 0x5da2, idx:  3213 },
-  { start: 0x5dac, end: 0x5dae, idx:  3219 },
-  { start: 0x5db7, end: 0x5dbd, idx:  3222 },
-  { start: 0x5dc9, end: 0x5e1d, idx:  3229 },
-  { start: 0x5e25, end: 0x5e57, idx:  3314 },
-  { start: 0x5e5f, end: 0x5e64, idx:  3365 },
-  { start: 0x5e72, end: 0x5ead, idx:  3371 },
-  { start: 0x5eb5, end: 0x5eb8, idx:  3431 },
-  { start: 0x5ec1, end: 0x5f41, idx:  3435 },
-  { start: 0x5f48, end: 0x5fa1, idx:  3564 },
-  { start: 0x5fa8, end: 0x5fc5, idx:  3654 },
-  { start: 0x5fcc, end: 0x5fcd, idx:  3684 },
-  { start: 0x5fd6, end: 0x5fe4, idx:  3686 },
-  { start: 0x5feb, end: 0x5fff, idx:  3701 },
-  { start: 0x600e, end: 0x6031, idx:  3722 },
-  { start: 0x603a, end: 0x603a, idx:  3758 },
-  { start: 0x6041, end: 0x6077, idx:  3759 },
-  { start: 0x6081, end: 0x60aa, idx:  3814 },
-  { start: 0x60b2, end: 0x60bd, idx:  3856 },
-  { start: 0x60c5, end: 0x60c7, idx:  3868 },
-  { start: 0x60d1, end: 0x60e8, idx:  3871 },
-  { start: 0x60f0, end: 0x612c, idx:  3895 },
-  { start: 0x6134, end: 0x6134, idx:  3956 },
-  { start: 0x613c, end: 0x6177, idx:  3957 },
-  { start: 0x617e, end: 0x619a, idx:  4017 },
-  { start: 0x61a4, end: 0x61d0, idx:  4046 },
-  { start: 0x61e3, end: 0x61e6, idx:  4091 },
-  { start: 0x61f2, end: 0x6200, idx:  4095 },
-  { start: 0x6208, end: 0x628a, idx:  4110 },
-  { start: 0x6291, end: 0x629e, idx:  4241 },
-  { start: 0x62ab, end: 0x62e1, idx:  4255 },
-  { start: 0x62ec, end: 0x62f7, idx:  4310 },
-  { start: 0x62fe, end: 0x6311, idx:  4322 },
-  { start: 0x6319, end: 0x631f, idx:  4342 },
-  { start: 0x6327, end: 0x632f, idx:  4349 },
-  { start: 0x633a, end: 0x633f, idx:  4358 },
-  { start: 0x6349, end: 0x635c, idx:  4364 },
-  { start: 0x6367, end: 0x63fa, idx:  4384 },
-  { start: 0x6406, end: 0x6406, idx:  4532 },
-  { start: 0x640d, end: 0x641c, idx:  4533 },
-  { start: 0x6426, end: 0x642d, idx:  4549 },
-  { start: 0x6434, end: 0x6442, idx:  4557 },
-  { start: 0x644e, end: 0x644e, idx:  4572 },
-  { start: 0x6458, end: 0x6458, idx:  4573 },
-  { start: 0x6467, end: 0x646f, idx:  4574 },
-  { start: 0x6476, end: 0x647a, idx:  4583 },
-  { start: 0x6483, end: 0x6488, idx:  4588 },
-  { start: 0x6492, end: 0x64b2, idx:  4594 },
-  { start: 0x64b9, end: 0x6505, idx:  4627 },
-  { start: 0x6518, end: 0x6578, idx:  4704 },
-  { start: 0x6582, end: 0x65b0, idx:  4801 },
-  { start: 0x65b7, end: 0x65f1, idx:  4848 },
-  { start: 0x65fa, end: 0x65fb, idx:  4907 },
-  { start: 0x6602, end: 0x6614, idx:  4909 },
-  { start: 0x661c, end: 0x6652, idx:  4928 },
-  { start: 0x665d, end: 0x667a, idx:  4983 },
-  { start: 0x6681, end: 0x66c9, idx:  5013 },
-  { start: 0x66d6, end: 0x66e9, idx:  5086 },
-  { start: 0x66f0, end: 0x671f, idx:  5106 },
-  { start: 0x6726, end: 0x67b9, idx:  5154 },
-  { start: 0x67c1, end: 0x6804, idx:  5302 },
-  { start: 0x6813, end: 0x6817, idx:  5370 },
-  { start: 0x681e, end: 0x6822, idx:  5375 },
-  { start: 0x6829, end: 0x682b, idx:  5380 },
-  { start: 0x6832, end: 0x6867, idx:  5383 },
-  { start: 0x6874, end: 0x6877, idx:  5437 },
-  { start: 0x687e, end: 0x6885, idx:  5441 },
-  { start: 0x688d, end: 0x68bc, idx:  5449 },
-  { start: 0x68c4, end: 0x68e7, idx:  5497 },
-  { start: 0x68ee, end: 0x68f2, idx:  5533 },
-  { start: 0x68f9, end: 0x6912, idx:  5538 },
-  { start: 0x6919, end: 0x693f, idx:  5564 },
-  { start: 0x694a, end: 0x694a, idx:  5603 },
-  { start: 0x6953, end: 0x6962, idx:  5604 },
-  { start: 0x696a, end: 0x6982, idx:  5620 },
-  { start: 0x698a, end: 0x69a0, idx:  5645 },
-  { start: 0x69a7, end: 0x69a7, idx:  5668 },
-  { start: 0x69ae, end: 0x69b4, idx:  5669 },
-  { start: 0x69bb, end: 0x69de, idx:  5676 },
-  { start: 0x69e7, end: 0x69f2, idx:  5712 },
-  { start: 0x69f9, end: 0x6a2e, idx:  5724 },
-  { start: 0x6a35, end: 0x6a3d, idx:  5778 },
-  { start: 0x6a44, end: 0x6a4b, idx:  5787 },
-  { start: 0x6a58, end: 0x6a66, idx:  5795 },
-  { start: 0x6a72, end: 0x6a78, idx:  5810 },
-  { start: 0x6a7f, end: 0x6a84, idx:  5817 },
-  { start: 0x6a8d, end: 0x6a90, idx:  5823 },
-  { start: 0x6a97, end: 0x6aa3, idx:  5827 },
-  { start: 0x6aaa, end: 0x6ac3, idx:  5840 },
-  { start: 0x6ad1, end: 0x6ad3, idx:  5866 },
-  { start: 0x6ada, end: 0x6adf, idx:  5869 },
-  { start: 0x6ae8, end: 0x6aea, idx:  5875 },
-  { start: 0x6afa, end: 0x6afb, idx:  5878 },
-  { start: 0x6b04, end: 0x6b0a, idx:  5880 },
-  { start: 0x6b12, end: 0x6b16, idx:  5887 },
-  { start: 0x6b1d, end: 0x6b27, idx:  5892 },
-  { start: 0x6b32, end: 0x6b8d, idx:  5903 },
-  { start: 0x6b95, end: 0x6bdf, idx:  5995 },
-  { start: 0x6beb, end: 0x6bf3, idx:  6070 },
-  { start: 0x6c08, end: 0x6c08, idx:  6079 },
-  { start: 0x6c0f, end: 0x6c1b, idx:  6080 },
-  { start: 0x6c23, end: 0x6c24, idx:  6093 },
-  { start: 0x6c34, end: 0x6c42, idx:  6095 },
-  { start: 0x6c4e, end: 0x6c73, idx:  6110 },
-  { start: 0x6c7a, end: 0x6ca2, idx:  6148 },
-  { start: 0x6cab, end: 0x6ccc, idx:  6189 },
-  { start: 0x6cd3, end: 0x6cf3, idx:  6223 },
-  { start: 0x6d0b, end: 0x6d2b, idx:  6256 },
-  { start: 0x6d32, end: 0x6d45, idx:  6289 },
-  { start: 0x6d59, end: 0x6d5c, idx:  6309 },
-  { start: 0x6d63, end: 0x6d79, idx:  6313 },
-  { start: 0x6d85, end: 0x6d9c, idx:  6336 },
-  { start: 0x6daf, end: 0x6dfb, idx:  6360 },
-  { start: 0x6e05, end: 0x6e0b, idx:  6437 },
-  { start: 0x6e13, end: 0x6e2f, idx:  6444 },
-  { start: 0x6e38, end: 0x6e43, idx:  6473 },
-  { start: 0x6e4a, end: 0x6e4e, idx:  6485 },
-  { start: 0x6e56, end: 0x6e5f, idx:  6490 },
-  { start: 0x6e67, end: 0x6e76, idx:  6500 },
-  { start: 0x6e7e, end: 0x6e82, idx:  6516 },
-  { start: 0x6e8c, end: 0x6ed5, idx:  6521 },
-  { start: 0x6edd, end: 0x6ede, idx:  6595 },
-  { start: 0x6eec, end: 0x6f15, idx:  6597 },
-  { start: 0x6f20, end: 0x6f23, idx:  6639 },
-  { start: 0x6f2b, end: 0x6f45, idx:  6643 },
-  { start: 0x6f54, end: 0x6f66, idx:  6670 },
-  { start: 0x6f6d, end: 0x6f86, idx:  6689 },
-  { start: 0x6f8e, end: 0x6f97, idx:  6715 },
-  { start: 0x6fa1, end: 0x6faa, idx:  6725 },
-  { start: 0x6fb1, end: 0x6fb9, idx:  6735 },
-  { start: 0x6fc0, end: 0x6fc6, idx:  6744 },
-  { start: 0x6fd4, end: 0x6fe4, idx:  6751 },
-  { start: 0x6feb, end: 0x7001, idx:  6768 },
-  { start: 0x7009, end: 0x701f, idx:  6791 },
-  { start: 0x7026, end: 0x7032, idx:  6814 },
-  { start: 0x703e, end: 0x703e, idx:  6827 },
-  { start: 0x704c, end: 0x7051, idx:  6828 },
-  { start: 0x7058, end: 0x7058, idx:  6834 },
-  { start: 0x7063, end: 0x7063, idx:  6835 },
-  { start: 0x706b, end: 0x7070, idx:  6836 },
-  { start: 0x7078, end: 0x707d, idx:  6842 },
-  { start: 0x7089, end: 0x7092, idx:  6848 },
-  { start: 0x7099, end: 0x7099, idx:  6858 },
-  { start: 0x70ac, end: 0x70ba, idx:  6859 },
-  { start: 0x70c8, end: 0x70cf, idx:  6874 },
-  { start: 0x70d9, end: 0x70df, idx:  6882 },
-  { start: 0x70f1, end: 0x70f1, idx:  6889 },
-  { start: 0x70f9, end: 0x70fd, idx:  6890 },
-  { start: 0x7109, end: 0x7109, idx:  6895 },
-  { start: 0x7114, end: 0x7126, idx:  6896 },
-  { start: 0x7136, end: 0x713c, idx:  6915 },
-  { start: 0x7149, end: 0x714e, idx:  6922 },
-  { start: 0x7155, end: 0x7159, idx:  6928 },
-  { start: 0x7162, end: 0x716e, idx:  6933 },
-  { start: 0x717d, end: 0x717d, idx:  6946 },
-  { start: 0x7184, end: 0x719f, idx:  6947 },
-  { start: 0x71a8, end: 0x71b1, idx:  6975 },
-  { start: 0x71b9, end: 0x71d7, idx:  6985 },
-  { start: 0x71df, end: 0x71ee, idx:  7016 },
-  { start: 0x71f5, end: 0x71ff, idx:  7032 },
-  { start: 0x7206, end: 0x7206, idx:  7043 },
-  { start: 0x720d, end: 0x7210, idx:  7044 },
-  { start: 0x721b, end: 0x721b, idx:  7048 },
-  { start: 0x7228, end: 0x7269, idx:  7049 },
-  { start: 0x7272, end: 0x7287, idx:  7115 },
-  { start: 0x7292, end: 0x7296, idx:  7137 },
-  { start: 0x72a0, end: 0x72b9, idx:  7142 },
-  { start: 0x72c2, end: 0x72c6, idx:  7168 },
-  { start: 0x72ce, end: 0x72e2, idx:  7173 },
-  { start: 0x72e9, end: 0x72ed, idx:  7194 },
-  { start: 0x72f7, end: 0x72fd, idx:  7199 },
-  { start: 0x730a, end: 0x730a, idx:  7206 },
-  { start: 0x7316, end: 0x7337, idx:  7207 },
-  { start: 0x733e, end: 0x7345, idx:  7241 },
-  { start: 0x734e, end: 0x734f, idx:  7249 },
-  { start: 0x7357, end: 0x7357, idx:  7251 },
-  { start: 0x7363, end: 0x737b, idx:  7252 },
-  { start: 0x7384, end: 0x738b, idx:  7277 },
-  { start: 0x7396, end: 0x7396, idx:  7285 },
-  { start: 0x73a9, end: 0x73a9, idx:  7286 },
-  { start: 0x73b2, end: 0x73b3, idx:  7287 },
-  { start: 0x73bb, end: 0x73ce, idx:  7289 },
-  { start: 0x73de, end: 0x73f1, idx:  7309 },
-  { start: 0x73f8, end: 0x7409, idx:  7329 },
-  { start: 0x7422, end: 0x7425, idx:  7347 },
-  { start: 0x7432, end: 0x7441, idx:  7351 },
-  { start: 0x7455, end: 0x7476, idx:  7367 },
-  { start: 0x747e, end: 0x7483, idx:  7401 },
-  { start: 0x748b, end: 0x748b, idx:  7407 },
-  { start: 0x749e, end: 0x74a7, idx:  7408 },
-  { start: 0x74b0, end: 0x74b0, idx:  7418 },
-  { start: 0x74bd, end: 0x74bd, idx:  7419 },
-  { start: 0x74ca, end: 0x74d4, idx:  7420 },
-  { start: 0x74dc, end: 0x74f8, idx:  7431 },
-  { start: 0x7503, end: 0x7505, idx:  7460 },
-  { start: 0x750c, end: 0x753c, idx:  7463 },
-  { start: 0x7544, end: 0x7578, idx:  7512 },
-  { start: 0x757f, end: 0x75e9, idx:  7565 },
-  { start: 0x75f0, end: 0x7601, idx:  7672 },
-  { start: 0x7609, end: 0x760d, idx:  7690 },
-  { start: 0x761f, end: 0x7627, idx:  7695 },
-  { start: 0x7630, end: 0x7634, idx:  7704 },
-  { start: 0x763b, end: 0x763b, idx:  7709 },
-  { start: 0x7642, end: 0x769a, idx:  7710 },
-  { start: 0x76ae, end: 0x770c, idx:  7799 },
-  { start: 0x771b, end: 0x7729, idx:  7894 },
-  { start: 0x7737, end: 0x7740, idx:  7909 },
-  { start: 0x7747, end: 0x7747, idx:  7919 },
-  { start: 0x775a, end: 0x776b, idx:  7920 },
-  { start: 0x7779, end: 0x777f, idx:  7938 },
-  { start: 0x778b, end: 0x7791, idx:  7945 },
-  { start: 0x779e, end: 0x77a5, idx:  7952 },
-  { start: 0x77ac, end: 0x77bf, idx:  7960 },
-  { start: 0x77c7, end: 0x77cd, idx:  7980 },
-  { start: 0x77d7, end: 0x77f3, idx:  7987 },
-  { start: 0x77fc, end: 0x7802, idx:  8016 },
-  { start: 0x780c, end: 0x7815, idx:  8023 },
-  { start: 0x7820, end: 0x7827, idx:  8033 },
-  { start: 0x7832, end: 0x7845, idx:  8041 },
-  { start: 0x785d, end: 0x785d, idx:  8061 },
-  { start: 0x786b, end: 0x7874, idx:  8062 },
-  { start: 0x787c, end: 0x789a, idx:  8072 },
-  { start: 0x78a3, end: 0x78da, idx:  8103 },
-  { start: 0x78e7, end: 0x78f4, idx:  8159 },
-  { start: 0x78fd, end: 0x7907, idx:  8173 },
-  { start: 0x790e, end: 0x7912, idx:  8184 },
-  { start: 0x7919, end: 0x7919, idx:  8189 },
-  { start: 0x7926, end: 0x792c, idx:  8190 },
-  { start: 0x793a, end: 0x7949, idx:  8197 },
-  { start: 0x7950, end: 0x796d, idx:  8213 },
-  { start: 0x7977, end: 0x798f, idx:  8243 },
-  { start: 0x799d, end: 0x799d, idx:  8268 },
-  { start: 0x79a6, end: 0x79c1, idx:  8269 },
-  { start: 0x79c9, end: 0x79d8, idx:  8297 },
-  { start: 0x79df, end: 0x79f0, idx:  8313 },
-  { start: 0x79fb, end: 0x7a00, idx:  8331 },
-  { start: 0x7a08, end: 0x7a20, idx:  8337 },
-  { start: 0x7a2e, end: 0x7a50, idx:  8362 },
-  { start: 0x7a57, end: 0x7a57, idx:  8397 },
-  { start: 0x7a61, end: 0x7a88, idx:  8398 },
-  { start: 0x7a92, end: 0x7a98, idx:  8438 },
-  { start: 0x7a9f, end: 0x7a9f, idx:  8445 },
-  { start: 0x7aa9, end: 0x7b11, idx:  8446 },
-  { start: 0x7b18, end: 0x7b2c, idx:  8551 },
-  { start: 0x7b33, end: 0x7b39, idx:  8572 },
-  { start: 0x7b45, end: 0x7b56, idx:  8579 },
-  { start: 0x7b5d, end: 0x7b5d, idx:  8597 },
-  { start: 0x7b65, end: 0x7b7a, idx:  8598 },
-  { start: 0x7b86, end: 0x7ba1, idx:  8620 },
-  { start: 0x7baa, end: 0x7bb8, idx:  8648 },
-  { start: 0x7bc0, end: 0x7bcf, idx:  8663 },
-  { start: 0x7bdd, end: 0x7bf7, idx:  8679 },
-  { start: 0x7c00, end: 0x7c00, idx:  8706 },
-  { start: 0x7c07, end: 0x7c17, idx:  8707 },
-  { start: 0x7c1f, end: 0x7c2b, idx:  8724 },
-  { start: 0x7c37, end: 0x7c43, idx:  8737 },
-  { start: 0x7c4c, end: 0x7c58, idx:  8750 },
-  { start: 0x7c5f, end: 0x7c65, idx:  8763 },
-  { start: 0x7c6c, end: 0x7c6c, idx:  8770 },
-  { start: 0x7c73, end: 0x7c75, idx:  8771 },
-  { start: 0x7c7e, end: 0x7ce7, idx:  8774 },
-  { start: 0x7cef, end: 0x7d22, idx:  8880 },
-  { start: 0x7d2b, end: 0x7d7d, idx:  8932 },
-  { start: 0x7d89, end: 0x7da3, idx:  9015 },
-  { start: 0x7dab, end: 0x7dbf, idx:  9042 },
-  { start: 0x7dc7, end: 0x7df4, idx:  9063 },
-  { start: 0x7dfb, end: 0x7e0b, idx:  9109 },
-  { start: 0x7e12, end: 0x7e12, idx:  9126 },
-  { start: 0x7e1b, end: 0x7e4d, idx:  9127 },
-  { start: 0x7e54, end: 0x7e5e, idx:  9178 },
-  { start: 0x7e66, end: 0x7e70, idx:  9189 },
-  { start: 0x7e79, end: 0x7e9c, idx:  9200 },
-  { start: 0x7f36, end: 0x7f3a, idx:  9236 },
-  { start: 0x7f45, end: 0x7f45, idx:  9241 },
-  { start: 0x7f4c, end: 0x7f58, idx:  9242 },
-  { start: 0x7f5f, end: 0x7f60, idx:  9255 },
-  { start: 0x7f67, end: 0x7f79, idx:  9257 },
-  { start: 0x7f82, end: 0x7fd5, idx:  9276 },
-  { start: 0x7fe0, end: 0x8021, idx:  9360 },
-  { start: 0x8028, end: 0x8028, idx:  9426 },
-  { start: 0x8033, end: 0x803f, idx:  9427 },
-  { start: 0x8046, end: 0x804a, idx:  9440 },
-  { start: 0x8052, end: 0x8068, idx:  9445 },
-  { start: 0x806f, end: 0x808c, idx:  9468 },
-  { start: 0x8093, end: 0x80ba, idx:  9498 },
-  { start: 0x80c3, end: 0x80ce, idx:  9538 },
-  { start: 0x80d6, end: 0x80e5, idx:  9550 },
-  { start: 0x80ef, end: 0x810a, idx:  9566 },
-  { start: 0x811a, end: 0x811b, idx:  9594 },
-  { start: 0x8123, end: 0x813e, idx:  9596 },
-  { start: 0x8146, end: 0x8155, idx:  9624 },
-  { start: 0x815f, end: 0x81a9, idx:  9640 },
-  { start: 0x81b0, end: 0x821f, idx:  9715 },
-  { start: 0x8229, end: 0x8239, idx:  9827 },
-  { start: 0x8240, end: 0x8240, idx:  9844 },
-  { start: 0x8247, end: 0x8247, idx:  9845 },
-  { start: 0x8258, end: 0x827e, idx:  9846 },
-  { start: 0x828b, end: 0x8292, idx:  9885 },
-  { start: 0x8299, end: 0x82bd, idx:  9893 },
-  { start: 0x82c5, end: 0x82c5, idx:  9930 },
-  { start: 0x82d1, end: 0x82fb, idx:  9931 },
-  { start: 0x8302, end: 0x830e, idx:  9974 },
-  { start: 0x8316, end: 0x831c, idx:  9987 },
-  { start: 0x8323, end: 0x8339, idx:  9994 },
-  { start: 0x8340, end: 0x8358, idx: 10017 },
-  { start: 0x8373, end: 0x837c, idx: 10042 },
-  { start: 0x8385, end: 0x83b5, idx: 10052 },
-  { start: 0x83bd, end: 0x83e0, idx: 10101 },
-  { start: 0x83e9, end: 0x8413, idx: 10137 },
-  { start: 0x8420, end: 0x8422, idx: 10180 },
-  { start: 0x8429, end: 0x843d, idx: 10183 },
-  { start: 0x8446, end: 0x844e, idx: 10204 },
-  { start: 0x8457, end: 0x847a, idx: 10213 },
-  { start: 0x8482, end: 0x8484, idx: 10249 },
-  { start: 0x848b, end: 0x84a1, idx: 10252 },
-  { start: 0x84ad, end: 0x84da, idx: 10275 },
-  { start: 0x84ec, end: 0x84f4, idx: 10321 },
-  { start: 0x84fc, end: 0x8506, idx: 10330 },
-  { start: 0x8511, end: 0x852d, idx: 10341 },
-  { start: 0x8535, end: 0x8535, idx: 10370 },
-  { start: 0x853d, end: 0x854e, idx: 10371 },
-  { start: 0x8555, end: 0x855a, idx: 10389 },
-  { start: 0x8563, end: 0x856d, idx: 10395 },
-  { start: 0x8577, end: 0x8577, idx: 10406 },
-  { start: 0x857e, end: 0x859c, idx: 10407 },
-  { start: 0x85a4, end: 0x85af, idx: 10438 },
-  { start: 0x85b9, end: 0x85ba, idx: 10450 },
-  { start: 0x85c1, end: 0x85c1, idx: 10452 },
-  { start: 0x85c9, end: 0x85d5, idx: 10453 },
-  { start: 0x85dc, end: 0x85dd, idx: 10466 },
-  { start: 0x85e4, end: 0x85ea, idx: 10468 },
-  { start: 0x85f7, end: 0x860b, idx: 10475 },
-  { start: 0x8613, end: 0x861a, idx: 10496 },
-  { start: 0x8622, end: 0x8622, idx: 10504 },
-  { start: 0x862d, end: 0x8630, idx: 10505 },
-  { start: 0x863f, end: 0x863f, idx: 10509 },
-  { start: 0x864d, end: 0x865f, idx: 10510 },
-  { start: 0x8667, end: 0x8671, idx: 10529 },
-  { start: 0x8679, end: 0x867b, idx: 10540 },
-  { start: 0x868a, end: 0x868c, idx: 10543 },
-  { start: 0x8693, end: 0x8695, idx: 10546 },
-  { start: 0x86a3, end: 0x86b6, idx: 10549 },
-  { start: 0x86c4, end: 0x86ef, idx: 10569 },
-  { start: 0x86f8, end: 0x871c, idx: 10613 },
-  { start: 0x8725, end: 0x8729, idx: 10650 },
-  { start: 0x8734, end: 0x873f, idx: 10655 },
-  { start: 0x8749, end: 0x8778, idx: 10667 },
-  { start: 0x877f, end: 0x8782, idx: 10715 },
-  { start: 0x878d, end: 0x878d, idx: 10719 },
-  { start: 0x879f, end: 0x87a2, idx: 10720 },
-  { start: 0x87ab, end: 0x87b3, idx: 10724 },
-  { start: 0x87ba, end: 0x87d2, idx: 10733 },
-  { start: 0x87e0, end: 0x87e0, idx: 10758 },
-  { start: 0x87ef, end: 0x87fe, idx: 10759 },
-  { start: 0x8805, end: 0x8805, idx: 10775 },
-  { start: 0x880d, end: 0x8816, idx: 10776 },
-  { start: 0x8821, end: 0x8827, idx: 10786 },
-  { start: 0x8831, end: 0x88a4, idx: 10793 },
-  { start: 0x88ab, end: 0x88b7, idx: 10909 },
-  { start: 0x88bf, end: 0x88c5, idx: 10922 },
-  { start: 0x88cf, end: 0x88e1, idx: 10929 },
-  { start: 0x88e8, end: 0x88e8, idx: 10948 },
-  { start: 0x88f2, end: 0x8913, idx: 10949 },
-  { start: 0x891d, end: 0x891e, idx: 10983 },
-  { start: 0x8925, end: 0x892b, idx: 10985 },
-  { start: 0x8936, end: 0x8944, idx: 10992 },
-  { start: 0x894c, end: 0x894d, idx: 11007 },
-  { start: 0x8956, end: 0x8956, idx: 11009 },
-  { start: 0x895e, end: 0x8977, idx: 11010 },
-  { start: 0x897e, end: 0x899a, idx: 11036 },
-  { start: 0x89a1, end: 0x89b3, idx: 11065 },
-  { start: 0x89ba, end: 0x89c0, idx: 11084 },
-  { start: 0x89d2, end: 0x89d2, idx: 11091 },
-  { start: 0x89da, end: 0x89e7, idx: 11092 },
-  { start: 0x89f4, end: 0x89f8, idx: 11106 },
-  { start: 0x8a00, end: 0x8a48, idx: 11111 },
-  { start: 0x8a50, end: 0x8a73, idx: 11184 },
-  { start: 0x8a7c, end: 0x8ab2, idx: 11220 },
-  { start: 0x8ab9, end: 0x8b2c, idx: 11275 },
-  { start: 0x8b33, end: 0x8b41, idx: 11391 },
-  { start: 0x8b49, end: 0x8b4f, idx: 11406 },
-  { start: 0x8b56, end: 0x8b5f, idx: 11413 },
-  { start: 0x8b66, end: 0x8b83, idx: 11423 },
-  { start: 0x8b8a, end: 0x8b9a, idx: 11453 },
-  { start: 0x8c37, end: 0x8c5a, idx: 11470 },
-  { start: 0x8c61, end: 0x8c62, idx: 11506 },
-  { start: 0x8c6a, end: 0x8c6c, idx: 11508 },
-  { start: 0x8c78, end: 0x8cd3, idx: 11511 },
-  { start: 0x8cda, end: 0x8ced, idx: 11603 },
-  { start: 0x8cfa, end: 0x8cfd, idx: 11623 },
-  { start: 0x8d04, end: 0x8d16, idx: 11627 },
-  { start: 0x8d64, end: 0x8d77, idx: 11646 },
-  { start: 0x8d81, end: 0x8d8a, idx: 11666 },
-  { start: 0x8d99, end: 0x8d99, idx: 11676 },
-  { start: 0x8da3, end: 0x8da8, idx: 11677 },
-  { start: 0x8db3, end: 0x8db3, idx: 11683 },
-  { start: 0x8dba, end: 0x8dc2, idx: 11684 },
-  { start: 0x8dcb, end: 0x8dcf, idx: 11693 },
-  { start: 0x8dd6, end: 0x8df5, idx: 11698 },
-  { start: 0x8dfc, end: 0x8dff, idx: 11730 },
-  { start: 0x8e08, end: 0x8e10, idx: 11734 },
-  { start: 0x8e1d, end: 0x8e1f, idx: 11743 },
-  { start: 0x8e2a, end: 0x8e35, idx: 11746 },
-  { start: 0x8e42, end: 0x8e64, idx: 11758 },
-  { start: 0x8e72, end: 0x8e99, idx: 11793 },
-  { start: 0x8ea1, end: 0x8ea1, idx: 11833 },
-  { start: 0x8eaa, end: 0x8eb1, idx: 11834 },
-  { start: 0x8ebe, end: 0x8ebe, idx: 11842 },
-  { start: 0x8ec5, end: 0x8ed2, idx: 11843 },
-  { start: 0x8edb, end: 0x8ee3, idx: 11857 },
-  { start: 0x8eeb, end: 0x8eeb, idx: 11866 },
-  { start: 0x8ef8, end: 0x8f1f, idx: 11867 },
-  { start: 0x8f26, end: 0x8f4e, idx: 11907 },
-  { start: 0x8f57, end: 0x8f64, idx: 11948 },
-  { start: 0x8f9b, end: 0x8fc5, idx: 11962 },
-  { start: 0x8fce, end: 0x8fda, idx: 12005 },
-  { start: 0x8fe2, end: 0x9027, idx: 12018 },
-  { start: 0x902e, end: 0x9091, idx: 12088 },
-  { start: 0x90a3, end: 0x90b8, idx: 12188 },
-  { start: 0x90c1, end: 0x90c1, idx: 12210 },
-  { start: 0x90ca, end: 0x90ce, idx: 12211 },
-  { start: 0x90db, end: 0x90ed, idx: 12216 },
-  { start: 0x90f5, end: 0x9102, idx: 12235 },
-  { start: 0x9112, end: 0x9112, idx: 12249 },
-  { start: 0x9119, end: 0x9119, idx: 12250 },
-  { start: 0x912d, end: 0x9132, idx: 12251 },
-  { start: 0x9149, end: 0x9158, idx: 12257 },
-  { start: 0x9162, end: 0x9178, idx: 12273 },
-  { start: 0x9182, end: 0x91e7, idx: 12296 },
-  { start: 0x91f5, end: 0x91ff, idx: 12398 },
-  { start: 0x920d, end: 0x9215, idx: 12409 },
-  { start: 0x921e, end: 0x921e, idx: 12418 },
-  { start: 0x9229, end: 0x922c, idx: 12419 },
-  { start: 0x9234, end: 0x9237, idx: 12423 },
-  { start: 0x923f, end: 0x9250, idx: 12427 },
-  { start: 0x9257, end: 0x9266, idx: 12445 },
-  { start: 0x9271, end: 0x9271, idx: 12461 },
-  { start: 0x927e, end: 0x9285, idx: 12462 },
-  { start: 0x9291, end: 0x929c, idx: 12470 },
-  { start: 0x92ad, end: 0x92ad, idx: 12482 },
-  { start: 0x92b7, end: 0x92b9, idx: 12483 },
-  { start: 0x92cf, end: 0x92d2, idx: 12486 },
-  { start: 0x92e4, end: 0x92fc, idx: 12490 },
-  { start: 0x9306, end: 0x9306, idx: 12515 },
-  { start: 0x930f, end: 0x9310, idx: 12516 },
-  { start: 0x9318, end: 0x933b, idx: 12518 },
-  { start: 0x9344, end: 0x9344, idx: 12554 },
-  { start: 0x934b, end: 0x934d, idx: 12555 },
-  { start: 0x9354, end: 0x9360, idx: 12558 },
-  { start: 0x936c, end: 0x936e, idx: 12571 },
-  { start: 0x9375, end: 0x9375, idx: 12574 },
-  { start: 0x937c, end: 0x937e, idx: 12575 },
-  { start: 0x938c, end: 0x938c, idx: 12578 },
-  { start: 0x9394, end: 0x939a, idx: 12579 },
-  { start: 0x93a7, end: 0x93b0, idx: 12586 },
-  { start: 0x93b9, end: 0x93b9, idx: 12596 },
-  { start: 0x93c3, end: 0x93c8, idx: 12597 },
-  { start: 0x93d0, end: 0x93e8, idx: 12603 },
-  { start: 0x9403, end: 0x9407, idx: 12628 },
-  { start: 0x9410, end: 0x941a, idx: 12633 },
-  { start: 0x9421, end: 0x9421, idx: 12644 },
-  { start: 0x942b, end: 0x942b, idx: 12645 },
-  { start: 0x9435, end: 0x943a, idx: 12646 },
-  { start: 0x9441, end: 0x9444, idx: 12652 },
-  { start: 0x9451, end: 0x9453, idx: 12656 },
-  { start: 0x945a, end: 0x9462, idx: 12659 },
-  { start: 0x946a, end: 0x9481, idx: 12668 },
-  { start: 0x9577, end: 0x9577, idx: 12692 },
-  { start: 0x9580, end: 0x9599, idx: 12693 },
-  { start: 0x95a0, end: 0x95b2, idx: 12719 },
-  { start: 0x95b9, end: 0x95cd, idx: 12738 },
-  { start: 0x95d4, end: 0x95e5, idx: 12759 },
-  { start: 0x961c, end: 0x9621, idx: 12777 },
-  { start: 0x9628, end: 0x9632, idx: 12783 },
-  { start: 0x963b, end: 0x9644, idx: 12794 },
-  { start: 0x964b, end: 0x9650, idx: 12804 },
-  { start: 0x965b, end: 0x967d, idx: 12810 },
-  { start: 0x9685, end: 0x9749, idx: 12845 },
-  { start: 0x9752, end: 0x9790, idx: 13042 },
-  { start: 0x9798, end: 0x97b4, idx: 13105 },
-  { start: 0x97c3, end: 0x97cb, idx: 13134 },
-  { start: 0x97d3, end: 0x97d3, idx: 13143 },
-  { start: 0x97dc, end: 0x97dc, idx: 13144 },
-  { start: 0x97ed, end: 0x981a, idx: 13145 },
-  { start: 0x9821, end: 0x9824, idx: 13191 },
-  { start: 0x982c, end: 0x982d, idx: 13195 },
-  { start: 0x9834, end: 0x983d, idx: 13197 },
-  { start: 0x9846, end: 0x985e, idx: 13207 },
-  { start: 0x9867, end: 0x9874, idx: 13232 },
-  { start: 0x98a8, end: 0x98b6, idx: 13246 },
-  { start: 0x98c3, end: 0x98c6, idx: 13261 },
-  { start: 0x98db, end: 0x98e2, idx: 13265 },
-  { start: 0x98e9, end: 0x98f4, idx: 13273 },
-  { start: 0x98fc, end: 0x992e, idx: 13285 },
-  { start: 0x993d, end: 0x9957, idx: 13336 },
-  { start: 0x9996, end: 0x9999, idx: 13363 },
-  { start: 0x99a5, end: 0x99b4, idx: 13367 },
-  { start: 0x99bc, end: 0x99c8, idx: 13383 },
-  { start: 0x99d0, end: 0x99e2, idx: 13396 },
-  { start: 0x99ed, end: 0x9a05, idx: 13415 },
-  { start: 0x9a0e, end: 0x9a19, idx: 13440 },
-  { start: 0x9a28, end: 0x9a30, idx: 13452 },
-  { start: 0x9a37, end: 0x9a37, idx: 13461 },
-  { start: 0x9a3e, end: 0x9a45, idx: 13462 },
-  { start: 0x9a4d, end: 0x9a4d, idx: 13470 },
-  { start: 0x9a55, end: 0x9a6b, idx: 13471 },
-  { start: 0x9aa8, end: 0x9ab0, idx: 13494 },
-  { start: 0x9ab8, end: 0x9ac4, idx: 13503 },
-  { start: 0x9acf, end: 0x9afb, idx: 13516 },
-  { start: 0x9b06, end: 0x9b06, idx: 13561 },
-  { start: 0x9b18, end: 0x9b32, idx: 13562 },
-  { start: 0x9b3b, end: 0x9b45, idx: 13589 },
-  { start: 0x9b4d, end: 0x9b5a, idx: 13600 },
-  { start: 0x9b6f, end: 0x9b74, idx: 13614 },
-  { start: 0x9b83, end: 0x9b83, idx: 13620 },
-  { start: 0x9b8e, end: 0x9b97, idx: 13621 },
-  { start: 0x9b9f, end: 0x9ba0, idx: 13631 },
-  { start: 0x9ba8, end: 0x9bb9, idx: 13633 },
-  { start: 0x9bc0, end: 0x9be8, idx: 13651 },
-  { start: 0x9bf0, end: 0x9bf5, idx: 13692 },
-  { start: 0x9c04, end: 0x9c25, idx: 13698 },
-  { start: 0x9c2d, end: 0x9c32, idx: 13732 },
-  { start: 0x9c39, end: 0x9c3e, idx: 13738 },
-  { start: 0x9c46, end: 0x9c48, idx: 13744 },
-  { start: 0x9c52, end: 0x9c60, idx: 13747 },
-  { start: 0x9c67, end: 0x9c67, idx: 13762 },
-  { start: 0x9c76, end: 0x9c78, idx: 13763 },
-  { start: 0x9ce5, end: 0x9cf6, idx: 13766 },
-  { start: 0x9d03, end: 0x9d2c, idx: 13784 },
-  { start: 0x9d3b, end: 0x9d48, idx: 13826 },
-  { start: 0x9d50, end: 0x9d51, idx: 13840 },
-  { start: 0x9d59, end: 0x9d64, idx: 13842 },
-  { start: 0x9d6c, end: 0x9d72, idx: 13854 },
-  { start: 0x9d7a, end: 0x9d7a, idx: 13861 },
-  { start: 0x9d87, end: 0x9d8f, idx: 13862 },
-  { start: 0x9d9a, end: 0x9d9a, idx: 13871 },
-  { start: 0x9da4, end: 0x9dc6, idx: 13872 },
-  { start: 0x9dcf, end: 0x9dd9, idx: 13907 },
-  { start: 0x9de6, end: 0x9de6, idx: 13918 },
-  { start: 0x9ded, end: 0x9dfd, idx: 13919 },
-  { start: 0x9e1a, end: 0x9e1e, idx: 13936 },
-  { start: 0x9e75, end: 0x9e81, idx: 13941 },
-  { start: 0x9e88, end: 0x9ead, idx: 13954 },
-  { start: 0x9eb8, end: 0x9ec4, idx: 13992 },
-  { start: 0x9ecc, end: 0x9ee8, idx: 14005 },
-  { start: 0x9eef, end: 0x9efd, idx: 14034 },
-  { start: 0x9f07, end: 0x9f15, idx: 14049 },
-  { start: 0x9f20, end: 0x9f21, idx: 14064 },
-  { start: 0x9f2c, end: 0x9f2c, idx: 14066 },
-  { start: 0x9f3b, end: 0x9f3e, idx: 14067 },
-  { start: 0x9f4a, end: 0x9f54, idx: 14071 },
-  { start: 0x9f5f, end: 0x9f77, idx: 14082 },
-  { start: 0x9f8d, end: 0x9f8d, idx: 14107 },
-  { start: 0x9f95, end: 0x9f95, idx: 14108 },
-  { start: 0x9f9c, end: 0x9fa0, idx: 14109 },
-  { start: 0xff01, end: 0xff5d, idx: 14114 },
-  { start: 0xffe3, end: 0xffe5, idx: 14207 },
-  { start: 0xffff, end: 0xffff, idx:     0 }
-};
-
-
-/* The following table is indexed using the previous tables.  It is
-   therefore indexed using UCS with leaving large gaps out.  It can
-   be computed with
-
-   egrep '^0x' < .../eastasia/jis/jis0208.txt | awk '{ print $3, $2}' |
-   egrep '^0x[^01]' | sort -u | perl tag.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=$first=$last=$idx=0;
-
-   sub fmt {
-     printf ("\n ") if (($n % 6) == 0);
-     ++$n;
-     my($val) = pop(@_);
-     printf (" \"\\x%02x\\x%02x\",", int($val / 256), $val % 256);
-   }
-
-   while (<>) {
-     local($ucs,$jis,%rest) = split;
-     local($u)=hex($ucs);
-     local($j)=hex($jis);
-     if ($u - $last > 6) {
-       if ($last != 0) {
-         $idx += $last - $first + 1;
-       }
-       $first=$u;
-     } else {
-       for ($m = $last + 1; $m < $u; ++$m) {
-	 fmt (0);
-       }
-     }
-     fmt ($j);
-     $last=$u;
-   }
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const char __jisx0208_from_ucs_tab[14210][2] =
-{
-  "\x21\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x21\x3d",
-  "\x21\x42", "\x00\x00", "\x21\x46", "\x21\x47", "\x00\x00", "\x00\x00",
-  "\x21\x48", "\x21\x49", "\x00\x00", "\x00\x00", "\x22\x77", "\x22\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x21\x45", "\x21\x44", "\x22\x73",
-  "\x00\x00", "\x21\x6c", "\x21\x6d", "\x22\x28", "\x21\x6e", "\x22\x72",
-  "\x22\x2b", "\x22\x2c", "\x22\x2a", "\x22\x2d", "\x22\x4d", "\x00\x00",
-  "\x22\x4e", "\x22\x4f", "\x00\x00", "\x22\x5f", "\x22\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x22\x60", "\x22\x3a", "\x00\x00", "\x00\x00",
-  "\x22\x3b", "\x21\x5d", "\x22\x65", "\x00\x00", "\x00\x00", "\x22\x67",
-  "\x21\x67", "\x00\x00", "\x22\x5c", "\x22\x4a", "\x22\x4b", "\x22\x41",
-  "\x22\x40", "\x22\x69", "\x22\x6a", "\x21\x68", "\x22\x68", "\x22\x66",
-  "\x22\x62", "\x21\x62", "\x22\x61", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x21\x65", "\x21\x66", "\x00\x00", "\x00\x00", "\x22\x63",
-  "\x22\x64", "\x22\x3e", "\x22\x3f", "\x00\x00", "\x00\x00", "\x22\x3c",
-  "\x22\x3d", "\x22\x5d", "\x22\x5e", "\x28\x21", "\x28\x2c", "\x28\x22",
-  "\x28\x2d", "\x28\x23", "\x00\x00", "\x00\x00", "\x28\x2e", "\x28\x24",
-  "\x00\x00", "\x00\x00", "\x28\x2f", "\x28\x26", "\x00\x00", "\x00\x00",
-  "\x28\x31", "\x28\x25", "\x00\x00", "\x00\x00", "\x28\x30", "\x28\x27",
-  "\x28\x3c", "\x00\x00", "\x00\x00", "\x28\x37", "\x00\x00", "\x00\x00",
-  "\x28\x32", "\x28\x29", "\x28\x3e", "\x00\x00", "\x00\x00", "\x28\x39",
-  "\x00\x00", "\x00\x00", "\x28\x34", "\x28\x28", "\x00\x00", "\x00\x00",
-  "\x28\x38", "\x28\x3d", "\x00\x00", "\x00\x00", "\x28\x33", "\x28\x2a",
-  "\x00\x00", "\x00\x00", "\x28\x3a", "\x28\x3f", "\x00\x00", "\x00\x00",
-  "\x28\x35", "\x28\x2b", "\x00\x00", "\x00\x00", "\x28\x3b", "\x00\x00",
-  "\x00\x00", "\x28\x40", "\x28\x36", "\x22\x23", "\x22\x22", "\x22\x25",
-  "\x22\x24", "\x22\x27", "\x22\x26", "\x22\x21", "\x21\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x21\x7b", "\x00\x00", "\x00\x00", "\x21\x7d",
-  "\x21\x7c", "\x22\x7e", "\x21\x7a", "\x21\x79", "\x21\x6a", "\x00\x00",
-  "\x21\x69", "\x22\x76", "\x00\x00", "\x00\x00", "\x22\x75", "\x00\x00",
-  "\x22\x74", "\x21\x21", "\x21\x22", "\x21\x23", "\x21\x37", "\x00\x00",
-  "\x21\x39", "\x21\x3a", "\x21\x3b", "\x21\x52", "\x21\x53", "\x21\x54",
-  "\x21\x55", "\x21\x56", "\x21\x57", "\x21\x58", "\x21\x59", "\x21\x5a",
-  "\x21\x5b", "\x22\x29", "\x22\x2e", "\x21\x4c", "\x21\x4d", "\x21\x41",
-  "\x24\x21", "\x24\x22", "\x24\x23", "\x24\x24", "\x24\x25", "\x24\x26",
-  "\x24\x27", "\x24\x28", "\x24\x29", "\x24\x2a", "\x24\x2b", "\x24\x2c",
-  "\x24\x2d", "\x24\x2e", "\x24\x2f", "\x24\x30", "\x24\x31", "\x24\x32",
-  "\x24\x33", "\x24\x34", "\x24\x35", "\x24\x36", "\x24\x37", "\x24\x38",
-  "\x24\x39", "\x24\x3a", "\x24\x3b", "\x24\x3c", "\x24\x3d", "\x24\x3e",
-  "\x24\x3f", "\x24\x40", "\x24\x41", "\x24\x42", "\x24\x43", "\x24\x44",
-  "\x24\x45", "\x24\x46", "\x24\x47", "\x24\x48", "\x24\x49", "\x24\x4a",
-  "\x24\x4b", "\x24\x4c", "\x24\x4d", "\x24\x4e", "\x24\x4f", "\x24\x50",
-  "\x24\x51", "\x24\x52", "\x24\x53", "\x24\x54", "\x24\x55", "\x24\x56",
-  "\x24\x57", "\x24\x58", "\x24\x59", "\x24\x5a", "\x24\x5b", "\x24\x5c",
-  "\x24\x5d", "\x24\x5e", "\x24\x5f", "\x24\x60", "\x24\x61", "\x24\x62",
-  "\x24\x63", "\x24\x64", "\x24\x65", "\x24\x66", "\x24\x67", "\x24\x68",
-  "\x24\x69", "\x24\x6a", "\x24\x6b", "\x24\x6c", "\x24\x6d", "\x24\x6e",
-  "\x24\x6f", "\x24\x70", "\x24\x71", "\x24\x72", "\x24\x73", "\x21\x2b",
-  "\x21\x2c", "\x21\x35", "\x21\x36", "\x00\x00", "\x00\x00", "\x25\x21",
-  "\x25\x22", "\x25\x23", "\x25\x24", "\x25\x25", "\x25\x26", "\x25\x27",
-  "\x25\x28", "\x25\x29", "\x25\x2a", "\x25\x2b", "\x25\x2c", "\x25\x2d",
-  "\x25\x2e", "\x25\x2f", "\x25\x30", "\x25\x31", "\x25\x32", "\x25\x33",
-  "\x25\x34", "\x25\x35", "\x25\x36", "\x25\x37", "\x25\x38", "\x25\x39",
-  "\x25\x3a", "\x25\x3b", "\x25\x3c", "\x25\x3d", "\x25\x3e", "\x25\x3f",
-  "\x25\x40", "\x25\x41", "\x25\x42", "\x25\x43", "\x25\x44", "\x25\x45",
-  "\x25\x46", "\x25\x47", "\x25\x48", "\x25\x49", "\x25\x4a", "\x25\x4b",
-  "\x25\x4c", "\x25\x4d", "\x25\x4e", "\x25\x4f", "\x25\x50", "\x25\x51",
-  "\x25\x52", "\x25\x53", "\x25\x54", "\x25\x55", "\x25\x56", "\x25\x57",
-  "\x25\x58", "\x25\x59", "\x25\x5a", "\x25\x5b", "\x25\x5c", "\x25\x5d",
-  "\x25\x5e", "\x25\x5f", "\x25\x60", "\x25\x61", "\x25\x62", "\x25\x63",
-  "\x25\x64", "\x25\x65", "\x25\x66", "\x25\x67", "\x25\x68", "\x25\x69",
-  "\x25\x6a", "\x25\x6b", "\x25\x6c", "\x25\x6d", "\x25\x6e", "\x25\x6f",
-  "\x25\x70", "\x25\x71", "\x25\x72", "\x25\x73", "\x25\x74", "\x25\x75",
-  "\x25\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x21\x26",
-  "\x21\x3c", "\x21\x33", "\x21\x34", "\x30\x6c", "\x43\x7a", "\x00\x00",
-  "\x3c\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x7c", "\x3e\x66",
-  "\x3b\x30", "\x3e\x65", "\x32\x3c", "\x00\x00", "\x49\x54", "\x4d\x3f",
-  "\x00\x00", "\x50\x22", "\x31\x2f", "\x00\x00", "\x00\x00", "\x33\x6e",
-  "\x50\x23", "\x40\x24", "\x52\x42", "\x35\x56", "\x4a\x3a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x67", "\x00\x00", "\x00\x00",
-  "\x4e\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x24", "\x00\x00", "\x00\x00",
-  "\x43\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x25", "\x36\x7a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x26", "\x00\x00", "\x34\x5d",
-  "\x43\x30", "\x00\x00", "\x3c\x67", "\x50\x27", "\x00\x00", "\x00\x00",
-  "\x50\x28", "\x00\x00", "\x00\x00", "\x50\x29", "\x47\x35", "\x00\x00",
-  "\x35\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x37", "\x00\x00", "\x46\x63", "\x38\x43", "\x4b\x33", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x49", "\x50\x2a",
-  "\x3e\x68", "\x50\x2b", "\x32\x35", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x36\x65", "\x38\x70", "\x4c\x69", "\x00\x00", "\x00\x00", "\x56\x26",
-  "\x4d\x70", "\x00\x00", "\x46\x7d", "\x34\x25", "\x00\x00", "\x35\x35",
-  "\x00\x00", "\x50\x2c", "\x00\x00", "\x00\x00", "\x50\x2d", "\x4e\x3b",
-  "\x00\x00", "\x4d\x3d", "\x41\x68", "\x50\x2f", "\x3b\x76", "\x46\x73",
-  "\x00\x00", "\x50\x32", "\x00\x00", "\x00\x00", "\x31\x3e", "\x38\x5f",
-  "\x00\x00", "\x38\x5e", "\x30\x66", "\x00\x00", "\x00\x00", "\x4f\x4b",
-  "\x4f\x4a", "\x00\x00", "\x3a\x33", "\x30\x21", "\x00\x00", "\x50\x33",
-  "\x50\x34", "\x50\x35", "\x4b\x34", "\x50\x36", "\x00\x00", "\x38\x72",
-  "\x30\x67", "\x4b\x72", "\x00\x00", "\x35\x7c", "\x00\x00", "\x00\x00",
-  "\x35\x7d", "\x35\x7e", "\x44\x62", "\x4e\x3c", "\x00\x00", "\x50\x37",
-  "\x00\x00", "\x00\x00", "\x50\x38", "\x00\x00", "\x00\x00", "\x50\x39",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x4d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x3a", "\x3f\x4e", "\x50\x3e",
-  "\x00\x00", "\x50\x3c", "\x00\x00", "\x50\x3d", "\x35\x58", "\x00\x00",
-  "\x00\x00", "\x3a\x23", "\x32\x70", "\x00\x00", "\x50\x3b", "\x50\x3a",
-  "\x4a\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x46",
-  "\x3b\x45", "\x42\x3e", "\x50\x3f", "\x49\x55", "\x40\x67", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x21\x38", "\x50\x40", "\x50\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x65", "\x4e\x61", "\x30\x4a", "\x50\x41",
-  "\x32\x3e", "\x00\x00", "\x36\x44", "\x00\x00", "\x43\x67", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x6f", "\x50\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x34\x6b", "\x50\x44", "\x30\x4b", "\x00\x00", "\x00\x00",
-  "\x38\x60", "\x34\x6c", "\x49\x7a", "\x48\x32", "\x35\x59", "\x32\x71",
-  "\x00\x00", "\x50\x67", "\x45\x41", "\x47\x6c", "\x50\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x3c", "\x00\x00", "\x4e\x62", "\x00\x00",
-  "\x3f\x2d", "\x00\x00", "\x3b\x47", "\x00\x00", "\x3b\x77", "\x32\x40",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x51",
-  "\x00\x00", "\x00\x00", "\x43\x22", "\x50\x4a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x4c", "\x44\x63", "\x3d\x3b",
-  "\x3a\x34", "\x4d\x24", "\x00\x00", "\x42\x4e", "\x00\x00", "\x32\x3f",
-  "\x00\x00", "\x50\x49", "\x00\x00", "\x4d\x3e", "\x50\x45", "\x50\x47",
-  "\x3a\x6e", "\x50\x48", "\x55\x24", "\x50\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x53", "\x50\x51", "\x00\x00",
-  "\x00\x00", "\x32\x42", "\x00\x00", "\x4a\x3b", "\x50\x4b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x4f", "\x38\x73", "\x00\x00",
-  "\x00\x00", "\x3b\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x26",
-  "\x00\x00", "\x00\x00", "\x50\x54", "\x00\x00", "\x50\x4c", "\x00\x00",
-  "\x00\x00", "\x4e\x63", "\x00\x00", "\x3b\x78", "\x00\x00", "\x50\x4d",
-  "\x00\x00", "\x50\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x55", "\x00\x00", "\x50\x4e", "\x00\x00", "\x00\x00", "\x36\x21",
-  "\x00\x00", "\x30\x4d", "\x00\x00", "\x00\x00", "\x36\x22", "\x32\x41",
-  "\x55\x25", "\x00\x00", "\x4b\x79", "\x49\x6e", "\x38\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x2f", "\x4e\x37",
-  "\x4a\x58", "\x00\x00", "\x00\x00", "\x37\x38", "\x42\x25", "\x32\x64",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x53",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x59", "\x00\x00", "\x50\x5e",
-  "\x50\x5c", "\x00\x00", "\x00\x00", "\x50\x57", "\x00\x00", "\x00\x00",
-  "\x42\x2f", "\x50\x5a", "\x00\x00", "\x50\x5d", "\x50\x5b", "\x00\x00",
-  "\x4a\x5d", "\x00\x00", "\x50\x58", "\x00\x00", "\x3f\x2e", "\x00\x00",
-  "\x4b\x73", "\x50\x5f", "\x50\x60", "\x3d\x24", "\x50\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x50", "\x00\x00", "\x49\x36", "\x50\x68",
-  "\x00\x00", "\x4a\x70", "\x00\x00", "\x32\x36", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x50\x6c", "\x50\x66", "\x50\x6f", "\x00\x00", "\x00\x00",
-  "\x41\x52", "\x00\x00", "\x38\x44", "\x00\x00", "\x47\x5c", "\x00\x00",
-  "\x60\x47", "\x00\x00", "\x50\x6e", "\x45\x5d", "\x00\x00", "\x50\x63",
-  "\x00\x00", "\x38\x76", "\x00\x00", "\x00\x00", "\x38\x75", "\x50\x61",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x5a", "\x00\x00",
-  "\x50\x69", "\x00\x00", "\x4a\x6f", "\x43\x4d", "\x50\x65", "\x37\x71",
-  "\x00\x00", "\x50\x62", "\x50\x6a", "\x50\x64", "\x4e\x51", "\x50\x6b",
-  "\x4f\x41", "\x36\x66", "\x00\x00", "\x00\x00", "\x37\x70", "\x50\x70",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x71", "\x50\x75", "\x30\x4e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x50",
-  "\x50\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x73",
-  "\x50\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x76", "\x00\x00",
-  "\x44\x64", "\x37\x72", "\x50\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x45", "\x00\x00", "\x42\x26", "\x44\x65",
-  "\x36\x76", "\x00\x00", "\x50\x79", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x36", "\x00\x00", "\x00\x00", "\x50\x7a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x7c", "\x4b\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x66", "\x3b\x31", "\x48\x77", "\x50\x7b",
-  "\x3a\x45", "\x4d\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x7e", "\x51\x23", "\x50\x7d", "\x3a\x44", "\x00\x00", "\x3d\x7d",
-  "\x37\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x24", "\x00\x00",
-  "\x00\x00", "\x36\x4f", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x21",
-  "\x51\x22", "\x00\x00", "\x00\x00", "\x46\x2f", "\x00\x00", "\x41\x7c",
-  "\x00\x00", "\x36\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x4d",
-  "\x51\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x51\x29", "\x00\x00", "\x51\x27", "\x00\x00", "\x41\x4e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x28",
-  "\x51\x2a", "\x51\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x2b",
-  "\x00\x00", "\x4a\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x37", "\x51\x2e", "\x51\x2f", "\x00\x00", "\x32\x2f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x2d", "\x3c\x74", "\x00\x00",
-  "\x51\x32", "\x51\x31", "\x51\x30", "\x00\x00", "\x50\x56", "\x00\x00",
-  "\x51\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x7e",
-  "\x00\x00", "\x51\x34", "\x4d\x25", "\x4c\x59", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x36", "\x00\x00", "\x00\x00", "\x51\x35",
-  "\x51\x38", "\x51\x37", "\x00\x00", "\x00\x00", "\x51\x39", "\x51\x3a",
-  "\x30\x74", "\x00\x00", "\x38\x35", "\x37\x3b", "\x3d\x3c", "\x43\x7b",
-  "\x36\x24", "\x40\x68", "\x38\x77", "\x00\x00", "\x39\x6e", "\x51\x3c",
-  "\x4c\x48", "\x45\x46", "\x00\x00", "\x3b\x79", "\x00\x00", "\x51\x3b",
-  "\x00\x00", "\x51\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x45\x5e", "\x00\x00", "\x33\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x3e", "\x00\x00", "\x00\x00",
-  "\x46\x7e", "\x00\x00", "\x00\x00", "\x41\x34", "\x51\x40", "\x51\x41",
-  "\x48\x2c", "\x38\x78", "\x4f\x3b", "\x51\x42", "\x00\x00", "\x00\x00",
-  "\x36\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x3c", "\x42\x36",
-  "\x36\x71", "\x45\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x73",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x43", "\x00\x00", "\x51\x44",
-  "\x00\x00", "\x00\x00", "\x46\x62", "\x31\x5f", "\x00\x00", "\x00\x00",
-  "\x51\x47", "\x3a\x7d", "\x00\x00", "\x51\x46", "\x3a\x46", "\x00\x00",
-  "\x51\x48", "\x66\x6e", "\x51\x49", "\x4b\x41", "\x51\x4a", "\x00\x00",
-  "\x51\x4b", "\x51\x4c", "\x3e\x69", "\x00\x00", "\x3c\x4c", "\x34\x27",
-  "\x00\x00", "\x51\x4f", "\x00\x00", "\x51\x4d", "\x4c\x3d", "\x51\x4e",
-  "\x00\x00", "\x49\x5a", "\x51\x50", "\x51\x51", "\x51\x52", "\x45\x5f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x56", "\x51\x54", "\x51\x55",
-  "\x51\x53", "\x3a\x63", "\x51\x57", "\x4c\x6a", "\x4e\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x58", "\x40\x28",
-  "\x51\x59", "\x3d\x5a", "\x00\x00", "\x00\x00", "\x51\x5a", "\x00\x00",
-  "\x43\x7c", "\x4e\x3f", "\x45\x60", "\x52\x45", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x5b", "\x74\x25", "\x36\x45", "\x00\x00",
-  "\x00\x00", "\x51\x5c", "\x4b\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3d\x68", "\x42\x7c", "\x00\x00", "\x51\x5e", "\x46\x64",
-  "\x00\x00", "\x00\x00", "\x51\x5f", "\x00\x00", "\x00\x00", "\x51\x60",
-  "\x33\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x61", "\x36\x27",
-  "\x00\x00", "\x46\x4c", "\x31\x7a", "\x3d\x50", "\x00\x00", "\x00\x00",
-  "\x48\x21", "\x51\x62", "\x00\x00", "\x45\x61", "\x00\x00", "\x00\x00",
-  "\x3f\x4f", "\x51\x63", "\x00\x00", "\x4a\x2c", "\x40\x5a", "\x34\x22",
-  "\x00\x00", "\x34\x29", "\x51\x64", "\x00\x00", "\x00\x00", "\x51\x66",
-  "\x00\x00", "\x00\x00", "\x37\x3a", "\x00\x00", "\x00\x00", "\x51\x65",
-  "\x00\x00", "\x00\x00", "\x4e\x73", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x69", "\x48\x3d", "\x4a\x4c", "\x00\x00",
-  "\x51\x67", "\x00\x00", "\x4d\x78", "\x51\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x51\x69", "\x00\x00", "\x45\x7e", "\x00\x00", "\x00\x00",
-  "\x51\x6a", "\x00\x00", "\x00\x00", "\x40\x29", "\x3a\x7e", "\x37\x74",
-  "\x51\x6b", "\x3b\x49", "\x39\x6f", "\x44\x66", "\x51\x6d", "\x00\x00",
-  "\x00\x00", "\x42\x27", "\x00\x00", "\x00\x00", "\x3a\x6f", "\x51\x6e",
-  "\x51\x6f", "\x41\x30", "\x00\x00", "\x51\x6c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x71", "\x00\x00", "\x4b\x36", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x64", "\x00\x00", "\x00\x00",
-  "\x51\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x75",
-  "\x3a\x5e", "\x47\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x74",
-  "\x51\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x7b",
-  "\x3e\x6a", "\x51\x7b", "\x33\x64", "\x51\x75", "\x51\x73", "\x41\x4f",
-  "\x51\x77", "\x00\x00", "\x51\x76", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x60", "\x51\x7c",
-  "\x4e\x2d", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x78", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x7d", "\x51\x7a", "\x00\x00", "\x51\x79",
-  "\x4e\x4f", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x79", "\x32\x43",
-  "\x00\x00", "\x00\x00", "\x4e\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x75", "\x45\x58", "\x39\x65", "\x52\x22",
-  "\x52\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x65", "\x00\x00",
-  "\x00\x00", "\x4f\x2b", "\x52\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x7a", "\x00\x00", "\x00\x00", "\x52\x24", "\x00\x00", "\x33\x2f",
-  "\x00\x00", "\x00\x00", "\x52\x26", "\x00\x00", "\x4b\x56", "\x00\x00",
-  "\x44\x3c", "\x00\x00", "\x4d\x26", "\x00\x00", "\x4a\x59", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x27", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x70\x55", "\x00\x00", "\x00\x00", "\x46\x30", "\x00\x00",
-  "\x52\x28", "\x34\x2a", "\x4c\x33", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x21", "\x52\x29", "\x4a\x67", "\x52\x2d", "\x00\x00", "\x40\x2a",
-  "\x52\x2a", "\x36\x50", "\x00\x00", "\x52\x2b", "\x34\x2b", "\x37\x2e",
-  "\x52\x2e", "\x00\x00", "\x52\x2f", "\x00\x00", "\x00\x00", "\x52\x30",
-  "\x52\x31", "\x3c\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x7b",
-  "\x4c\x5e", "\x00\x00", "\x4c\x68", "\x46\x77", "\x00\x00", "\x00\x00",
-  "\x4a\x71", "\x52\x32", "\x00\x00", "\x52\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x35", "\x00\x00", "\x52\x37", "\x52\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x38", "\x32\x3d",
-  "\x4b\x4c", "\x00\x00", "\x3a\x7c", "\x52\x39", "\x00\x00", "\x00\x00",
-  "\x41\x59", "\x00\x00", "\x00\x00", "\x3e\x22", "\x36\x29", "\x00\x00",
-  "\x52\x3a", "\x48\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x3b", "\x00\x00", "\x52\x3c", "\x00\x00", "\x52\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x3e", "\x49\x24", "\x36\x68",
-  "\x30\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x3f", "\x52\x3f",
-  "\x3d\x3d", "\x00\x00", "\x40\x69", "\x00\x00", "\x52\x41", "\x52\x40",
-  "\x3e\x23", "\x38\x61", "\x52\x43", "\x48\x3e", "\x00\x00", "\x00\x00",
-  "\x52\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x5c", "\x42\x34",
-  "\x42\x6e", "\x36\x28", "\x00\x00", "\x00\x00", "\x46\x6e", "\x43\x31",
-  "\x00\x00", "\x47\x6e", "\x00\x00", "\x4b\x4e", "\x00\x00", "\x52\x46",
-  "\x00\x00", "\x40\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x35", "\x00\x00", "\x00\x00", "\x52\x47", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x48", "\x31\x2c", "\x30\x75",
-  "\x34\x6d", "\x00\x00", "\x42\x28", "\x35\x51", "\x4d\x71", "\x00\x00",
-  "\x52\x4b", "\x32\x37", "\x00\x00", "\x00\x00", "\x52\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x36\x2a", "\x00\x00", "\x00\x00", "\x52\x4c",
-  "\x00\x00", "\x4c\x71", "\x52\x4d", "\x00\x00", "\x4e\x52", "\x00\x00",
-  "\x38\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x36",
-  "\x52\x4e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x50",
-  "\x52\x4f", "\x00\x00", "\x3f\x5f", "\x31\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x5e", "\x52\x51", "\x00\x00", "\x52\x52", "\x00\x00",
-  "\x00\x00", "\x38\x37", "\x00\x00", "\x00\x00", "\x52\x53", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x6e", "\x3b\x32", "\x52\x54",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x74", "\x3a\x35",
-  "\x35\x5a", "\x4d\x27", "\x41\x50", "\x48\x3f", "\x3c\x7d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x47", "\x00\x00",
-  "\x3c\x68", "\x3c\x75", "\x00\x00", "\x3d\x76", "\x00\x00", "\x48\x40",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x57", "\x00\x00", "\x31\x43",
-  "\x41\x51", "\x38\x7d", "\x38\x45", "\x36\x67", "\x00\x00", "\x00\x00",
-  "\x52\x5b", "\x43\x21", "\x42\x7e", "\x36\x2b", "\x3e\x24", "\x52\x5c",
-  "\x52\x5a", "\x32\x44", "\x42\x66", "\x3c\x38", "\x3b\x4b", "\x31\x26",
-  "\x00\x00", "\x00\x00", "\x33\x70", "\x39\x66", "\x3b\x4a", "\x00\x00",
-  "\x52\x5d", "\x52\x5e", "\x00\x00", "\x35\x49", "\x33\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x67", "\x35\x48", "\x44\x5f", "\x31\x25",
-  "\x46\x31", "\x4c\x3e", "\x39\x21", "\x4d\x79", "\x45\x47", "\x38\x7e",
-  "\x37\x2f", "\x00\x00", "\x52\x67", "\x00\x00", "\x36\x63", "\x4b\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x5d",
-  "\x00\x00", "\x00\x00", "\x52\x66", "\x00\x00", "\x34\x5e", "\x52\x61",
-  "\x52\x62", "\x52\x64", "\x52\x65", "\x00\x00", "\x35\x5b", "\x3f\x61",
-  "\x00\x00", "\x4a\x2d", "\x52\x63", "\x52\x5f", "\x38\x63", "\x00\x00",
-  "\x52\x60", "\x00\x00", "\x4f\x24", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x72", "\x00\x00", "\x44\x68", "\x38\x62", "\x39\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x68", "\x00\x00", "\x00\x00", "\x46\x5d",
-  "\x52\x6c", "\x3c\x7e", "\x00\x00", "\x3c\x76", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x6f", "\x52\x6d", "\x00\x00",
-  "\x4c\x23", "\x00\x00", "\x52\x6a", "\x52\x73", "\x52\x6e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x71", "\x38\x46", "\x4c\x3f", "\x00\x00",
-  "\x00\x00", "\x52\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x74",
-  "\x00\x00", "\x52\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x70", "\x4f\x42", "\x00\x00", "\x52\x6b", "\x52\x69", "\x52\x75",
-  "\x00\x00", "\x52\x70", "\x52\x78", "\x00\x00", "\x53\x23", "\x52\x7a",
-  "\x00\x00", "\x00\x00", "\x52\x7e", "\x00\x00", "\x00\x00", "\x53\x21",
-  "\x52\x7b", "\x00\x00", "\x00\x00", "\x53\x3e", "\x00\x00", "\x00\x00",
-  "\x3a\x69", "\x33\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x25", "\x30\x76",
-  "\x53\x24", "\x00\x00", "\x30\x25", "\x49\x4a", "\x53\x22", "\x00\x00",
-  "\x52\x7c", "\x00\x00", "\x00\x00", "\x52\x77", "\x52\x7d", "\x3a\x48",
-  "\x53\x26", "\x30\x77", "\x53\x2f", "\x00\x00", "\x00\x00", "\x53\x27",
-  "\x53\x28", "\x00\x00", "\x3e\x25", "\x4b\x69", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x2d", "\x53\x2c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x2f", "\x53\x2e", "\x00\x00", "\x00\x00", "\x53\x2b", "\x31\x34",
-  "\x00\x00", "\x3a\x36", "\x3f\x30", "\x53\x29", "\x45\x62", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x2a", "\x00\x00", "\x30\x22", "\x53\x34",
-  "\x4d\x23", "\x00\x00", "\x3e\x27", "\x00\x00", "\x53\x3a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x39", "\x53\x30", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x43", "\x00\x00", "\x53\x31",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x6f", "\x53\x36", "\x3e\x26",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x33",
-  "\x00\x00", "\x00\x00", "\x4c\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x3c", "\x00\x00", "\x00\x00", "\x53\x37", "\x53\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x35", "\x53\x3b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x32", "\x53\x41",
-  "\x53\x46", "\x00\x00", "\x53\x42", "\x00\x00", "\x53\x3d", "\x00\x00",
-  "\x00\x00", "\x53\x47", "\x41\x31", "\x00\x00", "\x00\x00", "\x53\x49",
-  "\x00\x00", "\x39\x22", "\x53\x3f", "\x43\x7d", "\x53\x43", "\x53\x3c",
-  "\x34\x2d", "\x00\x00", "\x34\x6e", "\x33\x65", "\x53\x44", "\x53\x40",
-  "\x37\x76", "\x53\x4a", "\x53\x48", "\x41\x53", "\x35\x4a", "\x36\x2c",
-  "\x00\x00", "\x53\x45", "\x00\x00", "\x36\x74", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x44", "\x53\x4e", "\x53\x4c",
-  "\x00\x00", "\x54\x27", "\x53\x51", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x4b", "\x00\x00", "\x53\x4f", "\x00\x00",
-  "\x00\x00", "\x53\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x4c",
-  "\x53\x50", "\x53\x53", "\x00\x00", "\x53\x58", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x56", "\x53\x55", "\x43\x32", "\x00\x00", "\x00\x00",
-  "\x32\x45", "\x53\x52", "\x00\x00", "\x53\x54", "\x3e\x28", "\x31\x33",
-  "\x00\x00", "\x00\x00", "\x53\x57", "\x32\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x62", "\x00\x00", "\x3e\x7c",
-  "\x53\x5e", "\x00\x00", "\x53\x5c", "\x00\x00", "\x53\x5d", "\x00\x00",
-  "\x53\x5f", "\x31\x3d", "\x41\x39", "\x00\x00", "\x53\x59", "\x00\x00",
-  "\x53\x5a", "\x33\x7a", "\x53\x61", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x6f", "\x00\x00", "\x53\x64", "\x53\x60", "\x53\x63", "\x4a\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x55", "\x00\x00", "\x48\x38",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x66",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x65",
-  "\x33\x45", "\x00\x00", "\x00\x00", "\x53\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x6a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x69", "\x53\x68", "\x00\x00", "\x47\x39", "\x00\x00",
-  "\x00\x00", "\x53\x6b", "\x53\x6c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x6e", "\x00\x00", "\x53\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x73", "\x53\x71", "\x53\x6f", "\x53\x72",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x75", "\x00\x00",
-  "\x00\x00", "\x53\x76", "\x00\x00", "\x53\x77", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x78", "\x51\x45", "\x00\x00", "\x3c\x7c", "\x3b\x4d",
-  "\x00\x00", "\x00\x00", "\x32\x73", "\x00\x00", "\x30\x78", "\x00\x00",
-  "\x00\x00", "\x43\x44", "\x53\x79", "\x00\x00", "\x3a\x24", "\x00\x00",
-  "\x30\x4f", "\x3f\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x7a", "\x38\x47", "\x00\x00", "\x00\x00", "\x39\x71",
-  "\x00\x00", "\x53\x7c", "\x53\x7b", "\x00\x00", "\x00\x00", "\x4a\x60",
-  "\x53\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x21", "\x53\x7e",
-  "\x00\x00", "\x54\x22", "\x00\x00", "\x54\x23", "\x00\x00", "\x37\x77",
-  "\x00\x00", "\x00\x00", "\x31\x60", "\x54\x24", "\x00\x00", "\x00\x00",
-  "\x54\x26", "\x00\x00", "\x54\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x28", "\x00\x00", "\x00\x00", "\x45\x5a", "\x54\x29", "\x30\x35",
-  "\x3a\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x3d",
-  "\x00\x00", "\x00\x00", "\x43\x4f", "\x54\x2a", "\x54\x2b", "\x00\x00",
-  "\x00\x00", "\x54\x2d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x2e", "\x00\x00", "\x3a\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x36\x51", "\x00\x00", "\x00\x00", "\x4b\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x2c", "\x54\x2f", "\x3a\x41", "\x39\x23",
-  "\x54\x33", "\x00\x00", "\x00\x00", "\x3a\x25", "\x00\x00", "\x43\x33",
-  "\x00\x00", "\x00\x00", "\x54\x30", "\x44\x5a", "\x54\x34", "\x00\x00",
-  "\x00\x00", "\x3f\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x54\x32", "\x54\x35", "\x00\x00", "\x37\x3f", "\x54\x36",
-  "\x54\x37", "\x00\x00", "\x39\x24", "\x33\x40", "\x54\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x3a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x3b", "\x00\x00",
-  "\x00\x00", "\x54\x38", "\x54\x31", "\x00\x00", "\x00\x00", "\x54\x3c",
-  "\x00\x00", "\x00\x00", "\x54\x3d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x64", "\x00\x00", "\x00\x00", "\x3e\x6b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x3f", "\x54\x40", "\x54\x3e", "\x00\x00",
-  "\x54\x42", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x38", "\x00\x00", "\x00\x00", "\x30\x68", "\x49\x56", "\x00\x00",
-  "\x00\x00", "\x54\x43", "\x3e\x7d", "\x00\x00", "\x00\x00", "\x3c\x39",
-  "\x00\x00", "\x47\x5d", "\x34\x70", "\x00\x00", "\x3a\x6b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4b\x59", "\x00\x00", "\x46\x32", "\x00\x00",
-  "\x00\x00", "\x37\x78", "\x42\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x41", "\x54\x44", "\x42\x44", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x48", "\x00\x00", "\x00\x00", "\x44\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x74\x21", "\x31\x61",
-  "\x4a\x73", "\x00\x00", "\x00\x00", "\x3e\x6c", "\x45\x48", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x66", "\x00\x00", "\x00\x00",
-  "\x54\x4e", "\x00\x00", "\x00\x00", "\x4a\x3d", "\x4e\x5d", "\x32\x74",
-  "\x54\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x3a", "\x54\x4d", "\x00\x00", "\x45\x63", "\x00\x00", "\x00\x00",
-  "\x45\x49", "\x45\x64", "\x48\x39", "\x44\x4d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3a\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x49",
-  "\x31\x76", "\x00\x00", "\x45\x36", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x54\x4b", "\x00\x00", "\x54\x47", "\x00\x00", "\x00\x00",
-  "\x3f\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x4f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x4e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x36\x2d", "\x00\x00", "\x54\x50", "\x4a\x68",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x7d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x44\x46", "\x00\x00", "\x00\x00", "\x54\x52",
-  "\x4b\x4f", "\x00\x00", "\x00\x00", "\x54\x53", "\x00\x00", "\x00\x00",
-  "\x54\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x57", "\x54\x51",
-  "\x54\x54", "\x54\x56", "\x00\x00", "\x00\x00", "\x3a\x26", "\x00\x00",
-  "\x00\x00", "\x4a\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x59",
-  "\x00\x00", "\x43\x45", "\x00\x00", "\x00\x00", "\x32\x75", "\x00\x00",
-  "\x3e\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x5b",
-  "\x00\x00", "\x54\x5a", "\x00\x00", "\x39\x68", "\x00\x00", "\x54\x5c",
-  "\x54\x5e", "\x54\x5d", "\x00\x00", "\x00\x00", "\x54\x60", "\x00\x00",
-  "\x54\x55", "\x54\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x61", "\x54\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x4e", "\x3f\x51", "\x00\x00", "\x41\x54", "\x54\x63",
-  "\x40\x3c", "\x30\x6d", "\x47\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x44\x5b", "\x00\x00", "\x54\x65", "\x54\x64", "\x54\x66",
-  "\x54\x67", "\x54\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x69", "\x4a\x51", "\x54\x6a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x46", "\x54\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x3c", "\x33\x30", "\x00\x00", "\x52\x49", "\x3d\x48",
-  "\x42\x3f", "\x54\x6c", "\x4c\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4c\x34", "\x00\x00", "\x00\x00", "\x54\x6e",
-  "\x00\x00", "\x42\x67", "\x00\x00", "\x45\x37", "\x42\x40", "\x49\x57",
-  "\x54\x6f", "\x54\x70", "\x31\x7b", "\x00\x00", "\x00\x00", "\x3c\x3a",
-  "\x54\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x50",
-  "\x54\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x62", "\x00\x00", "\x00\x00", "\x34\x71", "\x46\x60", "\x4a\x74",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x77", "\x41\x55",
-  "\x54\x76", "\x37\x40", "\x00\x00", "\x00\x00", "\x4b\x5b", "\x54\x75",
-  "\x00\x00", "\x45\x65", "\x54\x79", "\x00\x00", "\x54\x78", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x7b", "\x00\x00",
-  "\x54\x7a", "\x00\x00", "\x00\x00", "\x31\x7c", "\x00\x00", "\x54\x7c",
-  "\x3e\x29", "\x54\x7e", "\x43\x25", "\x00\x00", "\x54\x7d", "\x00\x00",
-  "\x4a\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x77",
-  "\x45\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x21", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x25", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x22", "\x47\x21", "\x48\x5e", "\x4c\x51", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x25", "\x00\x00",
-  "\x00\x00", "\x55\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x38", "\x00\x00", "\x00\x00", "\x4d\x45", "\x00\x00",
-  "\x00\x00", "\x4c\x2f", "\x00\x00", "\x56\x2c", "\x00\x00", "\x55\x23",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x26",
-  "\x00\x00", "\x42\x45", "\x00\x00", "\x00\x00", "\x4b\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x27", "\x4b\x65", "\x00\x00", "\x3a\x4a",
-  "\x00\x00", "\x00\x00", "\x3e\x2a", "\x55\x28", "\x00\x00", "\x00\x00",
-  "\x3b\x50", "\x00\x00", "\x3b\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x30\x39", "\x38\x48", "\x00\x00", "\x40\x2b", "\x30\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x2c", "\x55\x2d",
-  "\x00\x00", "\x55\x2a", "\x31\x38", "\x34\x2f", "\x00\x00", "\x55\x29",
-  "\x00\x00", "\x4c\x45", "\x49\x31", "\x30\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x30\x79", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x51", "\x00\x00", "\x30\x52", "\x00\x00", "\x30\x23", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x32", "\x55\x30",
-  "\x4c\x3c", "\x00\x00", "\x55\x33", "\x00\x00", "\x55\x31", "\x00\x00",
-  "\x00\x00", "\x55\x2f", "\x3f\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x64",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x37",
-  "\x55\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x34", "\x4f\x2c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x4c", "\x00\x00",
-  "\x00\x00", "\x55\x36", "\x3a\x27", "\x55\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x49\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x3a",
-  "\x00\x00", "\x55\x35", "\x4c\x3b", "\x47\x5e", "\x55\x3b", "\x49\x32",
-  "\x55\x3c", "\x55\x40", "\x55\x3d", "\x00\x00", "\x00\x00", "\x32\x47",
-  "\x55\x3f", "\x3c\x3b", "\x00\x00", "\x55\x3e", "\x37\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x4c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x45", "\x55\x42", "\x43\x64", "\x00\x00",
-  "\x55\x41", "\x00\x00", "\x00\x00", "\x55\x43", "\x00\x00", "\x00\x00",
-  "\x55\x44", "\x55\x46", "\x55\x47", "\x34\x72", "\x00\x00", "\x55\x49",
-  "\x55\x48", "\x55\x4a", "\x3e\x6e", "\x55\x4d", "\x00\x00", "\x44\x5c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x45", "\x00\x00", "\x55\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x4e", "\x55\x4f", "\x00\x00",
-  "\x55\x52", "\x00\x00", "\x00\x00", "\x55\x50", "\x00\x00", "\x55\x51",
-  "\x3b\x52", "\x55\x53", "\x00\x00", "\x00\x00", "\x39\x26", "\x55\x54",
-  "\x00\x00", "\x3b\x7a", "\x42\x38", "\x00\x00", "\x55\x55", "\x55\x56",
-  "\x3b\x5a", "\x39\x27", "\x00\x00", "\x4c\x52", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x28", "\x38\x49", "\x55\x57", "\x33\x58", "\x00\x00",
-  "\x00\x00", "\x55\x58", "\x00\x00", "\x42\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x59", "\x56\x23", "\x00\x00", "\x55\x5a",
-  "\x00\x00", "\x55\x5b", "\x00\x00", "\x00\x00", "\x55\x5c", "\x00\x00",
-  "\x55\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x55\x5f", "\x00\x00", "\x00\x00", "\x55\x60", "\x00\x00", "\x42\x70",
-  "\x00\x00", "\x31\x27", "\x3c\x69", "\x30\x42", "\x00\x00", "\x41\x57",
-  "\x34\x30", "\x3c\x35", "\x00\x00", "\x39\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x66", "\x00\x00", "\x3d\x21",
-  "\x34\x31", "\x43\x68", "\x44\x6a", "\x30\x38", "\x35\x39", "\x4a\x75",
-  "\x00\x00", "\x3c\x42", "\x00\x00", "\x00\x00", "\x35\x52", "\x40\x6b",
-  "\x3c\x3c", "\x4d\x28", "\x55\x61", "\x35\x5c", "\x00\x00", "\x3a\x4b",
-  "\x00\x00", "\x00\x00", "\x33\x32", "\x31\x63", "\x3e\x2c", "\x32\x48",
-  "\x00\x00", "\x55\x62", "\x4d\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x49", "\x00\x00", "\x00\x00", "\x3c\x64",
-  "\x55\x63", "\x34\x73", "\x46\x52", "\x4c\x29", "\x55\x64", "\x00\x00",
-  "\x55\x65", "\x00\x00", "\x00\x00", "\x49\x59", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x67", "\x00\x00", "\x34\x28", "\x36\x77", "\x55\x66",
-  "\x34\x32", "\x00\x00", "\x3f\x32", "\x55\x6b", "\x3b\x21", "\x00\x00",
-  "\x32\x49", "\x55\x6a", "\x00\x00", "\x55\x68", "\x55\x6c", "\x55\x69",
-  "\x47\x2b", "\x5c\x4d", "\x3f\x33", "\x00\x00", "\x55\x6d", "\x00\x00",
-  "\x00\x00", "\x4e\x40", "\x00\x00", "\x55\x6e", "\x00\x00", "\x00\x00",
-  "\x55\x70", "\x00\x00", "\x43\x7e", "\x55\x6f", "\x00\x00", "\x40\x23",
-  "\x00\x00", "\x3b\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x50",
-  "\x3c\x77", "\x00\x00", "\x49\x75", "\x40\x6c", "\x00\x00", "\x3c\x4d",
-  "\x55\x71", "\x3e\x2d", "\x55\x72", "\x55\x73", "\x30\x53", "\x42\x3a",
-  "\x3f\x52", "\x00\x00", "\x55\x74", "\x46\x33", "\x3e\x2e", "\x00\x00",
-  "\x3e\x2f", "\x00\x00", "\x55\x75", "\x00\x00", "\x00\x00", "\x40\x6d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x30", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x76", "\x00\x00", "\x55\x77",
-  "\x00\x00", "\x4c\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x22", "\x55\x79", "\x55\x7a", "\x3c\x5c",
-  "\x3f\x2c", "\x46\x74", "\x3f\x54", "\x48\x78", "\x47\x22", "\x36\x49",
-  "\x55\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x6f", "\x55\x7c",
-  "\x00\x00", "\x36\x7e", "\x00\x00", "\x46\x4f", "\x32\x30", "\x00\x00",
-  "\x3b\x53", "\x55\x7d", "\x56\x22", "\x56\x21", "\x36\x7d", "\x00\x00",
-  "\x55\x7e", "\x00\x00", "\x45\x38", "\x42\x30", "\x00\x00", "\x45\x4b",
-  "\x3c\x48", "\x00\x00", "\x00\x00", "\x41\x58", "\x4d\x7a", "\x56\x24",
-  "\x00\x00", "\x56\x25", "\x46\x56", "\x00\x00", "\x3b\x33", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x27", "\x00\x00", "\x00\x00",
-  "\x56\x28", "\x56\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x74",
-  "\x56\x2a", "\x00\x00", "\x00\x00", "\x56\x2b", "\x32\x2c", "\x41\x3b",
-  "\x34\x64", "\x00\x00", "\x56\x2d", "\x4c\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x52", "\x00\x00", "\x33\x59", "\x00\x00",
-  "\x00\x00", "\x56\x2f", "\x56\x31", "\x34\x5f", "\x00\x00", "\x00\x00",
-  "\x56\x2e", "\x56\x30", "\x00\x00", "\x56\x33", "\x56\x32", "\x00\x00",
-  "\x56\x34", "\x56\x35", "\x46\x3d", "\x36\x2e", "\x32\x65", "\x56\x36",
-  "\x56\x3b", "\x00\x00", "\x00\x00", "\x56\x39", "\x00\x00", "\x4a\x77",
-  "\x4a\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x38", "\x3d\x54",
-  "\x00\x00", "\x56\x37", "\x3f\x72", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x56\x3c", "\x00\x00", "\x00\x00", "\x3a\x6a", "\x00\x00", "\x00\x00",
-  "\x56\x42", "\x00\x00", "\x00\x00", "\x56\x43", "\x56\x3d", "\x33\x33",
-  "\x56\x3e", "\x56\x47", "\x56\x46", "\x56\x45", "\x56\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x40", "\x00\x00", "\x00\x00", "\x56\x44",
-  "\x4a\x78", "\x56\x4b", "\x56\x48", "\x00\x00", "\x56\x4a", "\x00\x00",
-  "\x4d\x72", "\x00\x00", "\x56\x49", "\x56\x3f", "\x3f\x73", "\x00\x00",
-  "\x00\x00", "\x56\x4c", "\x00\x00", "\x00\x00", "\x3a\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x4d", "\x00\x00", "\x00\x00", "\x56\x4e",
-  "\x56\x51", "\x00\x00", "\x56\x50", "\x00\x00", "\x00\x00", "\x56\x4f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x68", "\x56\x3a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x57", "\x56\x53", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x52", "\x56\x54", "\x00\x00", "\x56\x55",
-  "\x56\x58", "\x00\x00", "\x00\x00", "\x4e\x66", "\x00\x00", "\x56\x59",
-  "\x56\x56", "\x56\x5a", "\x00\x00", "\x00\x00", "\x34\x60", "\x56\x5b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x5d", "\x56\x5c",
-  "\x00\x00", "\x00\x00", "\x56\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x5f", "\x00\x00", "\x40\x6e", "\x3d\x23", "\x00\x00",
-  "\x00\x00", "\x3d\x64", "\x00\x00", "\x41\x63", "\x00\x00", "\x39\x29",
-  "\x3a\x38", "\x39\x2a", "\x35\x70", "\x00\x00", "\x00\x00", "\x56\x60",
-  "\x00\x00", "\x00\x00", "\x3a\x39", "\x00\x00", "\x00\x00", "\x38\x4a",
-  "\x56\x61", "\x4c\x26", "\x47\x43", "\x56\x62", "\x00\x00", "\x39\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x2c", "\x00\x00", "\x43\x27",
-  "\x36\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x54", "\x49\x5b",
-  "\x00\x00", "\x00\x00", "\x48\x41", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x63", "\x34\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x21", "\x00\x00", "\x00\x00", "\x56\x65", "\x56\x64", "\x56\x67",
-  "\x00\x00", "\x44\x6b", "\x3f\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3b\x55", "\x00\x00", "\x40\x4a", "\x00\x00",
-  "\x42\x53", "\x35\x22", "\x00\x00", "\x00\x00", "\x44\x22", "\x00\x00",
-  "\x00\x00", "\x56\x68", "\x56\x69", "\x3e\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4b\x39", "\x00\x00", "\x00\x00", "\x56\x6c",
-  "\x00\x00", "\x00\x00", "\x56\x6b", "\x56\x6a", "\x49\x7d", "\x00\x00",
-  "\x56\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x5a",
-  "\x00\x00", "\x56\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x6f", "\x4b\x6b", "\x00\x00", "\x56\x6e", "\x56\x70",
-  "\x00\x00", "\x48\x28", "\x56\x71", "\x4a\x3e", "\x56\x72", "\x34\x33",
-  "\x4a\x3f", "\x47\x2f", "\x56\x74", "\x56\x75", "\x00\x00", "\x39\x2c",
-  "\x34\x34", "\x56\x76", "\x38\x38", "\x4d\x44", "\x4d\x29", "\x34\x76",
-  "\x56\x78", "\x00\x00", "\x44\x23", "\x00\x00", "\x39\x2d", "\x3e\x31",
-  "\x00\x00", "\x00\x00", "\x48\x5f", "\x00\x00", "\x00\x00", "\x3e\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x78", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x6c", "\x4a\x79",
-  "\x45\x39", "\x00\x00", "\x00\x00", "\x39\x2e", "\x00\x00", "\x49\x5c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x79", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x59", "\x3a\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x4b", "\x00\x00", "\x44\x6d", "\x30\x43",
-  "\x3d\x6e", "\x39\x2f", "\x4d\x47", "\x56\x7a", "\x56\x7b", "\x47\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x7c", "\x4e\x77",
-  "\x4f\x2d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x7e",
-  "\x56\x7d", "\x00\x00", "\x00\x00", "\x33\x47", "\x00\x00", "\x00\x00",
-  "\x57\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x24", "\x57\x25",
-  "\x00\x00", "\x57\x23", "\x00\x00", "\x49\x40", "\x3e\x33", "\x57\x27",
-  "\x57\x26", "\x57\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x57\x28", "\x57\x29", "\x00\x00", "\x00\x00", "\x57\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x2d", "\x57\x2b", "\x00\x00", "\x57\x2c",
-  "\x57\x2e", "\x00\x00", "\x31\x64", "\x44\x6e", "\x57\x2f", "\x00\x00",
-  "\x37\x7a", "\x32\x76", "\x47\x36", "\x00\x00", "\x57\x30", "\x46\x7b",
-  "\x00\x00", "\x4a\x5b", "\x00\x00", "\x57\x31", "\x4f\x2e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x32", "\x4a\x40", "\x57\x35",
-  "\x50\x21", "\x50\x31", "\x00\x00", "\x3c\x30", "\x46\x75", "\x57\x36",
-  "\x00\x00", "\x35\x5d", "\x44\x24", "\x30\x7a", "\x57\x37", "\x4a\x26",
-  "\x39\x30", "\x00\x00", "\x00\x00", "\x43\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x44\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4c\x6f", "\x38\x39", "\x38\x4c", "\x00\x00", "\x57\x38",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x39", "\x00\x00", "\x57\x3f",
-  "\x00\x00", "\x3c\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x25",
-  "\x00\x00", "\x36\x2f", "\x57\x3a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x2b", "\x00\x00", "\x43\x46", "\x00\x00", "\x00\x00", "\x57\x3b",
-  "\x57\x3c", "\x00\x00", "\x36\x30", "\x00\x00", "\x57\x3d", "\x00\x00",
-  "\x57\x3e", "\x00\x00", "\x00\x00", "\x57\x40", "\x00\x00", "\x45\x76",
-  "\x00\x00", "\x00\x00", "\x57\x41", "\x57\x42", "\x00\x00", "\x57\x43",
-  "\x00\x00", "\x00\x00", "\x57\x34", "\x57\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x57\x44", "\x37\x41", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x27", "\x00\x00", "\x00\x00", "\x3a\x4c", "\x49\x37", "\x44\x26",
-  "\x49\x4b", "\x57\x45", "\x00\x00", "\x00\x00", "\x3e\x34", "\x31\x46",
-  "\x00\x00", "\x57\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x47",
-  "\x00\x00", "\x4c\x72", "\x00\x00", "\x00\x00", "\x48\x60", "\x00\x00",
-  "\x00\x00", "\x57\x4a", "\x31\x7d", "\x40\x2c", "\x57\x49", "\x57\x48",
-  "\x37\x42", "\x42\x54", "\x00\x00", "\x57\x4e", "\x57\x4c", "\x00\x00",
-  "\x57\x4b", "\x4e\x27", "\x38\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x79", "\x57\x4d", "\x45\x4c", "\x3d\x3e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x40", "\x57\x51", "\x57\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x4f", "\x00\x00", "\x57\x52", "\x38\x66",
-  "\x57\x53", "\x49\x7c", "\x3d\x5b", "\x00\x00", "\x00\x00", "\x57\x54",
-  "\x48\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x41",
-  "\x44\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x30",
-  "\x00\x00", "\x00\x00", "\x57\x55", "\x35\x2b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x34", "\x00\x00", "\x49\x2c",
-  "\x34\x77", "\x47\x26", "\x57\x56", "\x3b\x56", "\x4b\x3a", "\x4b\x3b",
-  "\x00\x00", "\x00\x00", "\x31\x7e", "\x57\x5b", "\x00\x00", "\x00\x00",
-  "\x43\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x58", "\x32\x77",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x2d", "\x57\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x30", "\x00\x00", "\x00\x00",
-  "\x57\x59", "\x00\x00", "\x00\x00", "\x57\x57", "\x00\x00", "\x39\x7a",
-  "\x00\x00", "\x57\x5d", "\x57\x63", "\x57\x69", "\x57\x61", "\x00\x00",
-  "\x45\x5c", "\x00\x00", "\x00\x00", "\x57\x66", "\x49\x5d", "\x00\x00",
-  "\x00\x00", "\x57\x60", "\x00\x00", "\x57\x65", "\x4e\x67", "\x3b\x57",
-  "\x00\x00", "\x00\x00", "\x42\x55", "\x57\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x5e", "\x57\x68", "\x40\x2d", "\x31\x65", "\x57\x62",
-  "\x32\x78", "\x57\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x31",
-  "\x00\x00", "\x57\x64", "\x57\x6a", "\x57\x6c", "\x57\x76", "\x57\x74",
-  "\x00\x00", "\x00\x00", "\x57\x71", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x57\x70", "\x4e\x78", "\x00\x00", "\x57\x72", "\x00\x00", "\x00\x00",
-  "\x36\x32", "\x00\x00", "\x39\x31", "\x00\x00", "\x00\x00", "\x3d\x7a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x79", "\x57\x6b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x6f", "\x57\x5f", "\x00\x00",
-  "\x32\x7a", "\x57\x73", "\x57\x75", "\x43\x51", "\x00\x00", "\x00\x00",
-  "\x3a\x28", "\x32\x38", "\x57\x6d", "\x57\x78", "\x57\x77", "\x36\x33",
-  "\x00\x00", "\x42\x29", "\x33\x66", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x43", "\x00\x00", "\x57\x6e", "\x57\x7a", "\x00\x00",
-  "\x57\x7d", "\x58\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3c\x3d", "\x00\x00", "\x58\x27", "\x44\x70", "\x57\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x25", "\x00\x00", "\x32\x79",
-  "\x00\x00", "\x58\x23", "\x58\x24", "\x00\x00", "\x00\x00", "\x57\x7e",
-  "\x58\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x67", "\x4d\x2a",
-  "\x00\x00", "\x00\x00", "\x34\x35", "\x00\x00", "\x00\x00", "\x31\x59",
-  "\x58\x26", "\x00\x00", "\x47\x3a", "\x30\x2d", "\x48\x61", "\x57\x5c",
-  "\x58\x2c", "\x58\x30", "\x4c\x65", "\x00\x00", "\x58\x29", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x69", "\x58\x2e", "\x3e\x70", "\x58\x2f",
-  "\x46\x57", "\x4f\x47", "\x00\x00", "\x58\x2b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x58\x31", "\x00\x00", "\x39\x7b", "\x00\x00",
-  "\x40\x4b", "\x00\x00", "\x00\x00", "\x30\x54", "\x58\x2a", "\x58\x28",
-  "\x00\x00", "\x41\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x7c",
-  "\x3b\x34", "\x42\x46", "\x58\x3d", "\x00\x00", "\x41\x5b", "\x58\x38",
-  "\x00\x00", "\x58\x35", "\x58\x36", "\x00\x00", "\x3c\x66", "\x58\x39",
-  "\x58\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x37",
-  "\x3d\x25", "\x00\x00", "\x58\x3a", "\x00\x00", "\x00\x00", "\x58\x34",
-  "\x00\x00", "\x4c\x7c", "\x4c\x7b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x58\x3e", "\x58\x3f", "\x30\x55", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x58\x33", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x36\x72", "\x30\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x36", "\x00\x00", "\x58\x3b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x58\x43", "\x58\x42", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x58\x47", "\x58\x48", "\x58\x46", "\x58\x49", "\x58\x41",
-  "\x58\x45", "\x00\x00", "\x00\x00", "\x58\x4a", "\x00\x00", "\x58\x4b",
-  "\x00\x00", "\x00\x00", "\x58\x40", "\x3b\x7c", "\x00\x00", "\x58\x44",
-  "\x42\x56", "\x39\x32", "\x58\x32", "\x3f\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x58\x58", "\x00\x00", "\x4a\x69", "\x00\x00",
-  "\x00\x00", "\x58\x4e", "\x58\x4f", "\x58\x50", "\x00\x00", "\x00\x00",
-  "\x58\x57", "\x00\x00", "\x58\x56", "\x00\x00", "\x00\x00", "\x4b\x7d",
-  "\x34\x37", "\x00\x00", "\x58\x54", "\x00\x00", "\x37\x45", "\x33\x34",
-  "\x00\x00", "\x00\x00", "\x58\x51", "\x00\x00", "\x00\x00", "\x4e\x38",
-  "\x58\x53", "\x30\x56", "\x58\x55", "\x00\x00", "\x58\x4c", "\x58\x52",
-  "\x58\x59", "\x37\x44", "\x58\x4d", "\x4d\x5d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x58\x5c", "\x00\x00", "\x00\x00", "\x58\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x7e", "\x00\x00", "\x4e\x79", "\x58\x61", "\x00\x00",
-  "\x00\x00", "\x58\x5e", "\x00\x00", "\x58\x5b", "\x00\x00", "\x00\x00",
-  "\x58\x5a", "\x58\x5f", "\x4a\x30", "\x00\x00", "\x00\x00", "\x46\x34",
-  "\x00\x00", "\x37\x46", "\x00\x00", "\x58\x62", "\x58\x5d", "\x00\x00",
-  "\x58\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x32\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x58\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x69", "\x00\x00", "\x00\x00",
-  "\x58\x6a", "\x3a\x29", "\x58\x68", "\x58\x66", "\x58\x65", "\x58\x6c",
-  "\x58\x64", "\x58\x6e", "\x00\x00", "\x00\x00", "\x32\x7b", "\x58\x70",
-  "\x00\x00", "\x00\x00", "\x58\x6f", "\x44\x28", "\x00\x00", "\x58\x73",
-  "\x00\x00", "\x58\x71", "\x58\x67", "\x37\x7c", "\x00\x00", "\x58\x72",
-  "\x00\x00", "\x58\x76", "\x58\x75", "\x58\x77", "\x58\x74", "\x58\x78",
-  "\x58\x79", "\x58\x7a", "\x4a\x6a", "\x00\x00", "\x58\x7c", "\x58\x7b",
-  "\x3d\x3f", "\x00\x00", "\x40\x2e", "\x32\x66", "\x32\x7c", "\x00\x00",
-  "\x58\x7d", "\x00\x00", "\x30\x3f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x40\x4c", "\x58\x7e", "\x00\x00", "\x6c\x43", "\x59\x21", "\x37\x61",
-  "\x00\x00", "\x59\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x40\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x23", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x24", "\x35\x3a", "\x59\x25", "\x00\x00",
-  "\x59\x26", "\x59\x27", "\x42\x57", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x4d", "\x00\x00", "\x00\x00", "\x4c\x61", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x3c", "\x3d\x6a", "\x59\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x70", "\x6e\x3d", "\x48\x62",
-  "\x00\x00", "\x3c\x6a", "\x00\x00", "\x3a\x4d", "\x59\x29", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x47", "\x00\x00", "\x4a\x27",
-  "\x00\x00", "\x00\x00", "\x42\x71", "\x00\x00", "\x00\x00", "\x59\x2c",
-  "\x00\x00", "\x00\x00", "\x59\x2a", "\x00\x00", "\x59\x2d", "\x00\x00",
-  "\x00\x00", "\x59\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x31", "\x00\x00", "\x00\x00", "\x30\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x49\x5e", "\x00\x00", "\x00\x00", "\x48\x63",
-  "\x00\x00", "\x00\x00", "\x59\x2f", "\x00\x00", "\x59\x32", "\x3e\x35",
-  "\x35\x3b", "\x00\x00", "\x59\x30", "\x59\x37", "\x3e\x36", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x31", "\x47\x44", "\x4d\x5e",
-  "\x59\x33", "\x59\x34", "\x59\x38", "\x45\x6a", "\x59\x35", "\x39\x33",
-  "\x40\x5e", "\x00\x00", "\x00\x00", "\x59\x46", "\x48\x34", "\x00\x00",
-  "\x42\x72", "\x48\x64", "\x5a\x2d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x7a", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x71",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x75", "\x00\x00", "\x59\x3b",
-  "\x32\x21", "\x43\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x44", "\x00\x00", "\x00\x00", "\x43\x34", "\x59\x3e", "\x59\x45",
-  "\x59\x40", "\x59\x47", "\x59\x43", "\x00\x00", "\x59\x42", "\x47\x6f",
-  "\x00\x00", "\x59\x3c", "\x32\x7d", "\x59\x3a", "\x35\x71", "\x42\x73",
-  "\x59\x36", "\x00\x00", "\x00\x00", "\x59\x39", "\x39\x34", "\x40\x5b",
-  "\x00\x00", "\x3e\x37", "\x59\x41", "\x47\x52", "\x00\x00", "\x00\x00",
-  "\x35\x72", "\x33\x48", "\x33\x67", "\x3f\x21", "\x59\x49", "\x59\x4e",
-  "\x00\x00", "\x59\x4a", "\x00\x00", "\x37\x7d", "\x00\x00", "\x59\x4f",
-  "\x3b\x22", "\x39\x69", "\x3d\x26", "\x59\x3d", "\x00\x00", "\x3b\x7d",
-  "\x59\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x58",
-  "\x59\x4d", "\x30\x44", "\x00\x00", "\x00\x00", "\x59\x48", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x29", "\x35\x73", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x34", "\x59\x4b",
-  "\x30\x27", "\x00\x00", "\x00\x00", "\x3a\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3f\x36", "\x44\x72", "\x00\x00", "\x00\x00", "\x48\x54",
-  "\x59\x51", "\x41\x5e", "\x42\x2a", "\x00\x00", "\x00\x00", "\x3b\x2b",
-  "\x59\x52", "\x00\x00", "\x59\x54", "\x59\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4a\x61", "\x00\x00", "\x44\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x5c", "\x4a\x7b", "\x3c\x4e",
-  "\x59\x60", "\x00\x00", "\x59\x5f", "\x00\x00", "\x00\x00", "\x3f\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x59\x59", "\x3e\x39", "\x00\x00", "\x00\x00", "\x46\x68",
-  "\x47\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x57",
-  "\x00\x00", "\x00\x00", "\x41\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3c\x78", "\x59\x5c", "\x00\x00", "\x00\x00", "\x3e\x38",
-  "\x00\x00", "\x59\x56", "\x59\x5b", "\x00\x00", "\x00\x00", "\x47\x53",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x55", "\x00\x00", "\x37\x21",
-  "\x00\x00", "\x00\x00", "\x33\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x5d", "\x4e\x2b", "\x3a\x4e", "\x43\x35", "\x59\x5a", "\x00\x00",
-  "\x40\x5c", "\x00\x00", "\x39\x35", "\x3f\x64", "\x31\x66", "\x41\x3c",
-  "\x59\x58", "\x35\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x47", "\x00\x00", "\x44\x4f", "\x59\x5e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x5f", "\x00\x00",
-  "\x00\x00", "\x59\x61", "\x00\x00", "\x59\x63", "\x00\x00", "\x00\x00",
-  "\x42\x37", "\x59\x69", "\x00\x00", "\x59\x64", "\x00\x00", "\x00\x00",
-  "\x59\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x41", "\x44\x73", "\x00\x00", "\x59\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x48",
-  "\x34\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x30\x2e", "\x00\x00", "\x59\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x34\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x67", "\x00\x00", "\x59\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x49", "\x59\x6c", "\x42\x3b", "\x00\x00", "\x59\x73",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x6d", "\x00\x00", "\x00\x00",
-  "\x59\x6a", "\x59\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x53", "\x59\x6e", "\x00\x00", "\x59\x72", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x48\x42", "\x45\x6b", "\x59\x6b", "\x00\x00", "\x59\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x48", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3a\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x5d",
-  "\x59\x77", "\x45\x26", "\x59\x74", "\x00\x00", "\x4b\x60", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x75", "\x59\x76",
-  "\x00\x00", "\x4c\x4e", "\x00\x00", "\x40\x22", "\x37\x62", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x7d", "\x3b\x35", "\x59\x7a",
-  "\x00\x00", "\x59\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x31", "\x59\x7b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x7c", "\x00\x00", "\x49\x6f",
-  "\x00\x00", "\x47\x45", "\x3b\x23", "\x00\x00", "\x40\x71", "\x00\x00",
-  "\x4b\x50", "\x33\x49", "\x00\x00", "\x5a\x25", "\x59\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x4a", "\x5a\x27", "\x00\x00",
-  "\x00\x00", "\x5a\x23", "\x00\x00", "\x5a\x24", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x22", "\x00\x00", "\x59\x3f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x26", "\x00\x00", "\x5a\x21", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x2b", "\x5a\x2c",
-  "\x45\x27", "\x5a\x2e", "\x00\x00", "\x00\x00", "\x3b\x24", "\x5a\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x3c", "\x00\x00",
-  "\x00\x00", "\x5a\x2f", "\x00\x00", "\x5a\x28", "\x5a\x33", "\x00\x00",
-  "\x5a\x32", "\x00\x00", "\x5a\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x34", "\x00\x00", "\x00\x00", "\x5a\x36", "\x3e\x71", "\x00\x00",
-  "\x5a\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x39",
-  "\x5a\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x38", "\x59\x70",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x3b",
-  "\x5a\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x78", "\x5a\x3c", "\x5a\x30", "\x00\x00", "\x00\x00", "\x3b\x59",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x3d", "\x5a\x3e",
-  "\x5a\x40", "\x5a\x3f", "\x5a\x41", "\x32\x7e", "\x00\x00", "\x39\x36",
-  "\x00\x00", "\x00\x00", "\x4a\x7c", "\x40\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x4e", "\x00\x00", "\x00\x00",
-  "\x5a\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x46",
-  "\x00\x00", "\x49\x52", "\x00\x00", "\x35\x5f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x45", "\x5a\x44", "\x47\x54", "\x5a\x47", "\x36\x35",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x49", "\x5a\x48", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x3a", "\x3b\x36", "\x00\x00", "\x00\x00",
-  "\x46\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x74", "\x00\x00",
-  "\x5a\x4a", "\x00\x00", "\x40\x30", "\x45\x28", "\x00\x00", "\x49\x5f",
-  "\x5a\x4b", "\x5a\x4c", "\x5a\x4d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x38", "\x55\x5d", "\x40\x46", "\x00\x00", "\x00\x00", "\x49\x4c",
-  "\x00\x00", "\x3a\x58", "\x00\x00", "\x48\x65", "\x48\x43", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x4d", "\x00\x00",
-  "\x4e\x41", "\x00\x00", "\x5a\x4f", "\x3c\x50", "\x00\x00", "\x00\x00",
-  "\x5a\x50", "\x00\x00", "\x30\x36", "\x00\x00", "\x00\x00", "\x36\x54",
-  "\x40\x4d", "\x00\x00", "\x49\x60", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x51", "\x3b\x42", "\x43\x47", "\x00\x00", "\x3b\x5b", "\x3f\x37",
-  "\x5a\x52", "\x00\x00", "\x4a\x7d", "\x00\x00", "\x00\x00", "\x31\x77",
-  "\x3b\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x55", "\x00\x00",
-  "\x5a\x53", "\x5a\x56", "\x4e\x39", "\x5a\x54", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x7b", "\x5a\x57", "\x00\x00", "\x00\x00",
-  "\x42\x32", "\x00\x00", "\x00\x00", "\x5a\x58", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x7a", "\x00\x00", "\x5a\x5a", "\x00\x00",
-  "\x5a\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x5b",
-  "\x5a\x5c", "\x34\x7b", "\x00\x00", "\x00\x00", "\x46\x7c", "\x43\x36",
-  "\x35\x6c", "\x3b\x5d", "\x41\x61", "\x00\x00", "\x00\x00", "\x3d\x5c",
-  "\x30\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x5d", "\x32\x22",
-  "\x5a\x61", "\x39\x37", "\x5a\x60", "\x00\x00", "\x00\x00", "\x3a\x2b",
-  "\x3e\x3a", "\x00\x00", "\x00\x00", "\x5a\x5f", "\x00\x00", "\x3e\x3b",
-  "\x00\x00", "\x4c\x40", "\x3a\x2a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x30\x57", "\x40\x4e", "\x5a\x66", "\x00\x00", "\x00\x00", "\x40\x31",
-  "\x31\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x55",
-  "\x00\x00", "\x4b\x66", "\x3a\x72", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3e\x3c", "\x00\x00", "\x40\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x65", "\x5a\x63", "\x5a\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x6b", "\x00\x00",
-  "\x00\x00", "\x5b\x26", "\x00\x00", "\x5a\x6a", "\x3b\x7e", "\x39\x38",
-  "\x5a\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x69",
-  "\x00\x00", "\x3f\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x67",
-  "\x00\x00", "\x00\x00", "\x3b\x2f", "\x5a\x6c", "\x5a\x6b", "\x5a\x70",
-  "\x00\x00", "\x00\x00", "\x5a\x71", "\x00\x00", "\x5a\x6d", "\x00\x00",
-  "\x33\x22", "\x5a\x6e", "\x5a\x6f", "\x48\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x49\x61", "\x37\x4a", "\x5a\x72", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x32", "\x00\x00", "\x3e\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x43\x52", "\x36\x47", "\x00\x00", "\x5a\x73",
-  "\x5a\x77", "\x00\x00", "\x00\x00", "\x32\x4b", "\x5a\x74", "\x5a\x76",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x75", "\x00\x00",
-  "\x00\x00", "\x3d\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x48", "\x30\x45", "\x5a\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x2a", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x71", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x43", "\x00\x00", "\x00\x00",
-  "\x4a\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4b\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x22", "\x5a\x7b",
-  "\x00\x00", "\x00\x00", "\x5a\x7e", "\x00\x00", "\x5a\x7d", "\x00\x00",
-  "\x00\x00", "\x5a\x7a", "\x00\x00", "\x00\x00", "\x5b\x21", "\x00\x00",
-  "\x00\x00", "\x46\x5e", "\x00\x00", "\x5a\x7c", "\x5b\x23", "\x00\x00",
-  "\x00\x00", "\x3d\x6c", "\x5b\x24", "\x00\x00", "\x4d\x4b", "\x47\x78",
-  "\x00\x00", "\x00\x00", "\x5b\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x27", "\x00\x00", "\x00\x00", "\x5b\x28",
-  "\x5b\x29", "\x00\x00", "\x36\x4a", "\x31\x48", "\x39\x39", "\x5b\x2a",
-  "\x00\x00", "\x5b\x2b", "\x3d\x71", "\x41\x62", "\x00\x00", "\x00\x00",
-  "\x52\x58", "\x41\x3e", "\x41\x3d", "\x42\x58", "\x3a\x47", "\x00\x00",
-  "\x00\x00", "\x50\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x6e", "\x4d\x2d", "\x00\x00", "\x4a\x7e", "\x00\x00", "\x49\x7e",
-  "\x00\x00", "\x5b\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x73", "\x44\x3f", "\x5b\x2d", "\x4f\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x3e", "\x00\x00", "\x44\x2b", "\x5b\x2e", "\x34\x7c",
-  "\x5b\x2f", "\x5b\x30", "\x4c\x5a", "\x00\x00", "\x4c\x24", "\x4b\x76",
-  "\x4b\x5c", "\x3b\x25", "\x5b\x32", "\x00\x00", "\x00\x00", "\x3c\x6b",
-  "\x00\x00", "\x00\x00", "\x4b\x51", "\x00\x00", "\x5b\x34", "\x5b\x37",
-  "\x5b\x36", "\x00\x00", "\x34\x79", "\x00\x00", "\x00\x00", "\x35\x60",
-  "\x00\x00", "\x5b\x33", "\x00\x00", "\x5b\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x38", "\x00\x00", "\x00\x00", "\x3f\x79",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x7b", "\x30\x49",
-  "\x3a\x60", "\x42\x3c", "\x00\x00", "\x3c\x5d", "\x00\x00", "\x00\x00",
-  "\x3e\x73", "\x00\x00", "\x00\x00", "\x5b\x3b", "\x00\x00", "\x00\x00",
-  "\x45\x4e", "\x00\x00", "\x5b\x39", "\x42\x2b", "\x5b\x3a", "\x3e\x72",
-  "\x4c\x5d", "\x5b\x3c", "\x5b\x3d", "\x4d\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x42", "\x00\x00", "\x00\x00", "\x39\x3a",
-  "\x00\x00", "\x47\x55", "\x5b\x3f", "\x45\x6c", "\x5a\x5e", "\x5a\x62",
-  "\x00\x00", "\x35\x4f", "\x00\x00", "\x47\x47", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x41", "\x00\x00", "\x3e\x3e", "\x48\x44",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x47",
-  "\x00\x00", "\x48\x7a", "\x00\x00", "\x5b\x3e", "\x00\x00", "\x5b\x44",
-  "\x5b\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x4f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x6d", "\x00\x00", "\x4e\x53",
-  "\x00\x00", "\x00\x00", "\x4b\x67", "\x00\x00", "\x32\x4c", "\x3b\x5e",
-  "\x00\x00", "\x00\x00", "\x4f\x48", "\x5b\x46", "\x3f\x75", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x45", "\x00\x00", "\x00\x00", "\x5b\x40",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x4f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x4c", "\x5b\x4a", "\x00\x00",
-  "\x32\x4d", "\x5b\x48", "\x5b\x4e", "\x5b\x54", "\x42\x48", "\x00\x00",
-  "\x00\x00", "\x4a\x41", "\x00\x00", "\x5b\x56", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x49\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x55",
-  "\x47\x70", "\x4b\x3f", "\x34\x3b", "\x00\x00", "\x40\x77", "\x3d\x40",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x53", "\x00\x00", "\x4d\x2e",
-  "\x00\x00", "\x00\x00", "\x5b\x51", "\x5b\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5b\x52", "\x00\x00", "\x5b\x4f", "\x00\x00", "\x00\x00",
-  "\x5b\x57", "\x00\x00", "\x5b\x4d", "\x00\x00", "\x00\x00", "\x5b\x4b",
-  "\x00\x00", "\x5b\x53", "\x5b\x49", "\x00\x00", "\x43\x6c", "\x00\x00",
-  "\x4c\x78", "\x3c\x46", "\x3a\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x3a", "\x00\x00", "\x00\x00", "\x4b\x6f",
-  "\x33\x41", "\x00\x00", "\x00\x00", "\x44\x4e", "\x46\x4a", "\x31\x49",
-  "\x40\x72", "\x00\x00", "\x00\x00", "\x40\x34", "\x37\x2a", "\x5b\x59",
-  "\x00\x00", "\x00\x00", "\x39\x3b", "\x33\x7c", "\x5b\x5b", "\x33\x74",
-  "\x5b\x61", "\x5b\x5e", "\x00\x00", "\x40\x73", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x4b", "\x3a\x2c", "\x00\x00", "\x00\x00", "\x33\x4a",
-  "\x3a\x4f", "\x00\x00", "\x00\x00", "\x5b\x5c", "\x37\x65", "\x37\x4b",
-  "\x45\x6d", "\x00\x00", "\x00\x00", "\x5b\x5a", "\x00\x00", "\x30\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x5d", "\x5b\x5f",
-  "\x00\x00", "\x36\x4d", "\x37\x2c", "\x00\x00", "\x34\x3c", "\x35\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x62", "\x00\x00",
-  "\x00\x00", "\x3a\x79", "\x4b\x71", "\x00\x00", "\x3b\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x30", "\x5b\x6f", "\x00\x00", "\x32\x33", "\x5b\x64", "\x5b\x75",
-  "\x5b\x65", "\x00\x00", "\x4e\x42", "\x00\x00", "\x5b\x6c", "\x00\x00",
-  "\x47\x5f", "\x5b\x74", "\x00\x00", "\x5b\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x30\x34", "\x5b\x69", "\x00\x00", "\x00\x00", "\x39\x3c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x6b", "\x00\x00", "\x5b\x6a",
-  "\x00\x00", "\x5b\x66", "\x5b\x71", "\x00\x00", "\x3e\x3f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x6d", "\x38\x68", "\x4d\x7c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x68", "\x00\x00", "\x44\x74",
-  "\x33\x23", "\x3a\x2d", "\x00\x00", "\x5b\x60", "\x00\x00", "\x5b\x70",
-  "\x33\x61", "\x00\x00", "\x00\x00", "\x5b\x6e", "\x5b\x72", "\x00\x00",
-  "\x45\x6e", "\x34\x7e", "\x00\x00", "\x5c\x32", "\x00\x00", "\x00\x00",
-  "\x4c\x49", "\x5b\x77", "\x34\x7d", "\x00\x00", "\x5b\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x40", "\x00\x00", "\x5c\x21",
-  "\x5c\x23", "\x00\x00", "\x5c\x27", "\x5b\x79", "\x00\x00", "\x43\x2a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x6f", "\x5c\x2b",
-  "\x5b\x7c", "\x00\x00", "\x5c\x28", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x22", "\x3f\x39", "\x5c\x2c", "\x00\x00", "\x00\x00", "\x40\x33",
-  "\x5c\x2a", "\x34\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4f\x50", "\x5b\x76", "\x00\x00", "\x00\x00", "\x5c\x26",
-  "\x30\x58", "\x00\x00", "\x00\x00", "\x5b\x78", "\x00\x00", "\x00\x00",
-  "\x4c\x3a", "\x5b\x7d", "\x3f\x22", "\x44\x47", "\x5b\x73", "\x00\x00",
-  "\x00\x00", "\x5c\x25", "\x3f\x7a", "\x5c\x2f", "\x33\x71", "\x38\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x31", "\x5b\x7a",
-  "\x5c\x30", "\x00\x00", "\x5c\x29", "\x5b\x7b", "\x00\x00", "\x5c\x2d",
-  "\x00\x00", "\x5c\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x4e",
-  "\x00\x00", "\x5c\x24", "\x00\x00", "\x00\x00", "\x5c\x3b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5c\x3d", "\x00\x00", "\x44\x58", "\x4d\x4c",
-  "\x49\x76", "\x5c\x38", "\x42\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x3e", "\x41\x3f", "\x00\x00", "\x5c\x35", "\x5c\x42", "\x5c\x41",
-  "\x00\x00", "\x46\x6f", "\x5c\x40", "\x46\x6a", "\x5c\x44", "\x5c\x37",
-  "\x00\x00", "\x36\x48", "\x5c\x3a", "\x3d\x5d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x60", "\x5c\x3c", "\x36\x4b", "\x00\x00", "\x5c\x34",
-  "\x5c\x36", "\x5c\x33", "\x00\x00", "\x00\x00", "\x4f\x30", "\x33\x5a",
-  "\x5c\x39", "\x00\x00", "\x00\x00", "\x5c\x43", "\x33\x35", "\x3a\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x5d", "\x00\x00", "\x00\x00",
-  "\x5c\x54", "\x00\x00", "\x00\x00", "\x4f\x31", "\x5c\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x3a", "\x5c\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x55", "\x5c\x52", "\x5c\x46",
-  "\x00\x00", "\x00\x00", "\x5c\x63", "\x5c\x45", "\x00\x00", "\x5c\x58",
-  "\x5c\x50", "\x00\x00", "\x00\x00", "\x5c\x4b", "\x5c\x48", "\x00\x00",
-  "\x5c\x49", "\x00\x00", "\x5c\x51", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x74\x22", "\x00\x00", "\x00\x00", "\x5c\x4e", "\x39\x3d", "\x44\x48",
-  "\x41\x64", "\x5c\x4c", "\x00\x00", "\x5c\x47", "\x00\x00", "\x00\x00",
-  "\x5c\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x4d",
-  "\x4b\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x4f", "\x5c\x59",
-  "\x5c\x61", "\x5c\x5a", "\x00\x00", "\x00\x00", "\x5c\x67", "\x00\x00",
-  "\x5c\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x60",
-  "\x5c\x5f", "\x00\x00", "\x44\x50", "\x00\x00", "\x41\x65", "\x00\x00",
-  "\x5c\x5d", "\x00\x00", "\x00\x00", "\x5c\x5b", "\x00\x00", "\x00\x00",
-  "\x5c\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x68",
-  "\x48\x75", "\x5c\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x69", "\x5c\x6c", "\x5c\x66", "\x00\x00", "\x00\x00",
-  "\x43\x74", "\x00\x00", "\x49\x38", "\x00\x00", "\x5c\x5c", "\x00\x00",
-  "\x00\x00", "\x5c\x64", "\x3e\x40", "\x00\x00", "\x4c\x4f", "\x5c\x78",
-  "\x5c\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x22", "\x32\x23", "\x33\x5f", "\x00\x00", "\x00\x00", "\x5c\x53",
-  "\x3e\x41", "\x5c\x70", "\x00\x00", "\x5c\x77", "\x3c\x79", "\x33\x72",
-  "\x00\x00", "\x00\x00", "\x43\x2e", "\x5c\x6d", "\x00\x00", "\x00\x00",
-  "\x5c\x72", "\x5c\x76", "\x00\x00", "\x00\x00", "\x36\x36", "\x35\x4c",
-  "\x5c\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x21", "\x00\x00", "\x46\x4b", "\x5c\x73", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x75", "\x5c\x6f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5c\x71", "\x33\x60", "\x43\x49", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5c\x7c", "\x5c\x7a", "\x38\x69", "\x00\x00",
-  "\x5c\x79", "\x5d\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5b\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x7b", "\x00\x00",
-  "\x5c\x7d", "\x5c\x7e", "\x5d\x2c", "\x00\x00", "\x5d\x28", "\x00\x00",
-  "\x5b\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x27",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x26", "\x00\x00",
-  "\x00\x00", "\x5d\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x6a", "\x5d\x25", "\x5d\x24", "\x5d\x2a", "\x00\x00",
-  "\x4f\x26", "\x5d\x2d", "\x36\x7b", "\x00\x00", "\x00\x00", "\x5d\x29",
-  "\x5d\x2b", "\x48\x27", "\x00\x00", "\x5d\x2e", "\x5d\x32", "\x5d\x2f",
-  "\x4d\x73", "\x5d\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x5e", "\x5d\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x34",
-  "\x31\x35", "\x00\x00", "\x5d\x36", "\x37\x67", "\x3c\x21", "\x00\x00",
-  "\x36\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x24", "\x4d\x5f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x38", "\x5d\x37",
-  "\x5d\x3a", "\x35\x3d", "\x00\x00", "\x00\x00", "\x36\x56", "\x34\x3e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x3c", "\x00\x00", "\x5d\x3e", "\x00\x00",
-  "\x00\x00", "\x32\x4e", "\x00\x00", "\x43\x37", "\x00\x00", "\x5d\x3f",
-  "\x00\x00", "\x00\x00", "\x34\x3f", "\x5d\x41", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x40", "\x00\x00", "\x5d\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x43", "\x00\x00", "\x5d\x44", "\x3b\x5f",
-  "\x40\x35", "\x3a\x21", "\x00\x00", "\x49\x70", "\x00\x00", "\x00\x00",
-  "\x4a\x62", "\x4f\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x50", "\x4e\x72",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x45", "\x5d\x46", "\x00\x00",
-  "\x3b\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x47", "\x5d\x48",
-  "\x00\x00", "\x00\x00", "\x5d\x4a", "\x5d\x49", "\x00\x00", "\x4b\x58",
-  "\x00\x00", "\x00\x00", "\x3d\x5e", "\x3c\x6c", "\x3b\x44", "\x00\x00",
-  "\x5d\x4b", "\x5d\x4d", "\x3f\x23", "\x00\x00", "\x5d\x4c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x4e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x4f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x50", "\x5d\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x52", "\x00\x00", "\x5d\x54",
-  "\x5d\x53", "\x5d\x55", "\x32\x25", "\x43\x4a", "\x00\x00", "\x5d\x56",
-  "\x00\x00", "\x00\x00", "\x3b\x26", "\x33\x4c", "\x5d\x57", "\x00\x00",
-  "\x00\x00", "\x45\x42", "\x54\x4c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x23", "\x5d\x58", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x59", "\x00\x00", "\x4a\x6c", "\x4b\x68", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x47", "\x5d\x5a", "\x48\x66", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x7b", "\x00\x00", "\x00\x00", "\x4c\x53",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x5b", "\x5d\x5d", "\x5d\x5c",
-  "\x00\x00", "\x00\x00", "\x5d\x5f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x5e", "\x5d\x61", "\x3b\x61", "\x00\x00", "\x4c\x31", "\x00\x00",
-  "\x5d\x62", "\x5d\x63", "\x00\x00", "\x00\x00", "\x35\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x64", "\x5d\x66", "\x5d\x65", "\x3f\x65",
-  "\x00\x00", "\x00\x00", "\x49\x39", "\x31\x4a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x45", "\x00\x00", "\x44\x75",
-  "\x3d\x41", "\x35\x61", "\x48\x46", "\x00\x00", "\x3c\x2e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x68", "\x00\x00", "\x34\x40",
-  "\x00\x00", "\x00\x00", "\x31\x78", "\x00\x00", "\x00\x00", "\x46\x72",
-  "\x5d\x67", "\x39\x3e", "\x43\x53", "\x00\x00", "\x5d\x69", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x71", "\x00\x00",
-  "\x5d\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x41", "\x00\x00", "\x35\x62", "\x5d\x72", "\x37\x68", "\x00\x00",
-  "\x00\x00", "\x35\x25", "\x5d\x70", "\x00\x00", "\x00\x00", "\x5d\x6e",
-  "\x5d\x6b", "\x4d\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x59", "\x5d\x6c",
-  "\x00\x00", "\x00\x00", "\x5d\x74", "\x00\x00", "\x5d\x73", "\x37\x23",
-  "\x00\x00", "\x00\x00", "\x32\x2d", "\x00\x00", "\x00\x00", "\x3a\x3b",
-  "\x5d\x6d", "\x5d\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x57", "\x42\x74", "\x4b\x77", "\x00\x00", "\x00\x00",
-  "\x5d\x7c", "\x00\x00", "\x00\x00", "\x5d\x7d", "\x00\x00", "\x32\x4f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x28", "\x4c\x7d",
-  "\x5e\x21", "\x3c\x23", "\x3e\x42", "\x5d\x78", "\x5d\x7e", "\x31\x68",
-  "\x00\x00", "\x36\x37", "\x00\x00", "\x00\x00", "\x5d\x75", "\x5d\x7a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x74", "\x47\x71", "\x00\x00",
-  "\x48\x67", "\x5d\x77", "\x00\x00", "\x4b\x21", "\x00\x00", "\x5d\x79",
-  "\x00\x00", "\x5e\x24", "\x00\x00", "\x5e\x22", "\x00\x00", "\x5d\x7b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x22", "\x47\x48", "\x35\x63",
-  "\x00\x00", "\x45\x25", "\x00\x00", "\x00\x00", "\x43\x6d", "\x00\x00",
-  "\x5e\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x23",
-  "\x42\x59", "\x5d\x76", "\x00\x00", "\x31\x4b", "\x4d\x4e", "\x5e\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x76", "\x00\x00",
-  "\x5e\x2c", "\x00\x00", "\x4d\x6c", "\x00\x00", "\x00\x00", "\x46\x36",
-  "\x5e\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x4c", "\x39\x3f",
-  "\x5e\x29", "\x3d\x27", "\x5e\x2e", "\x00\x00", "\x5e\x2d", "\x5e\x28",
-  "\x00\x00", "\x5e\x2b", "\x00\x00", "\x00\x00", "\x33\x68", "\x00\x00",
-  "\x5e\x2a", "\x47\x49", "\x00\x00", "\x00\x00", "\x4e\x2e", "\x00\x00",
-  "\x00\x00", "\x3e\x74", "\x40\x75", "\x5e\x36", "\x5e\x34", "\x00\x00",
-  "\x49\x4d", "\x5e\x31", "\x5e\x33", "\x00\x00", "\x31\x3a", "\x00\x00",
-  "\x00\x00", "\x39\x40", "\x4f\x32", "\x00\x00", "\x33\x3d", "\x00\x00",
-  "\x49\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4d\x61", "\x00\x00", "\x00\x00", "\x33\x24", "\x3f\x3b", "\x5e\x35",
-  "\x5e\x3a", "\x00\x00", "\x00\x00", "\x3e\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x30", "\x00\x00", "\x5e\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5e\x32", "\x00\x00", "\x5e\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x5e", "\x00\x00", "\x45\x73", "\x46\x42",
-  "\x33\x36", "\x00\x00", "\x00\x00", "\x31\x55", "\x00\x00", "\x00\x00",
-  "\x5e\x3e", "\x00\x00", "\x00\x00", "\x5e\x41", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4e\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x64",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x48", "\x5e\x42",
-  "\x5e\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x54", "\x5e\x45",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x4a", "\x5e\x47",
-  "\x00\x00", "\x00\x00", "\x5e\x4c", "\x00\x00", "\x00\x00", "\x45\x71",
-  "\x5e\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x44",
-  "\x00\x00", "\x00\x00", "\x43\x38", "\x00\x00", "\x00\x00", "\x5e\x4b",
-  "\x00\x00", "\x5e\x40", "\x00\x00", "\x5e\x46", "\x00\x00", "\x5e\x4d",
-  "\x30\x7c", "\x5e\x43", "\x00\x00", "\x5e\x4e", "\x00\x00", "\x00\x00",
-  "\x3f\x3c", "\x00\x00", "\x3d\x5f", "\x00\x00", "\x4a\x25", "\x00\x00",
-  "\x3a\x2e", "\x00\x00", "\x5e\x3b", "\x5e\x49", "\x45\x3a", "\x40\x36",
-  "\x00\x00", "\x33\x69", "\x3a\x51", "\x3e\x44", "\x5e\x3d", "\x3d\x42",
-  "\x37\x4c", "\x00\x00", "\x5e\x3c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5e\x52", "\x3d\x6d", "\x38\x3a", "\x00\x00", "\x5e\x61", "\x00\x00",
-  "\x5e\x5b", "\x35\x74", "\x45\x4f", "\x00\x00", "\x5e\x56", "\x5e\x5f",
-  "\x30\x2f", "\x31\x32", "\x00\x00", "\x00\x00", "\x32\x39", "\x00\x00",
-  "\x5e\x58", "\x42\x2c", "\x5e\x4f", "\x5e\x51", "\x39\x41", "\x5e\x62",
-  "\x00\x00", "\x5e\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x55",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x5c", "\x4c\x2b",
-  "\x00\x00", "\x00\x00", "\x5e\x5a", "\x5e\x5e", "\x38\x50", "\x00\x00",
-  "\x3e\x45", "\x00\x00", "\x00\x00", "\x43\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x54", "\x4d\x2f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5e\x57", "\x00\x00", "\x00\x00", "\x5e\x50", "\x45\x72", "\x00\x00",
-  "\x00\x00", "\x5e\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x59",
-  "\x4f\x51", "\x3c\x3e", "\x4b\x7e", "\x00\x00", "\x5e\x63", "\x48\x2e",
-  "\x00\x00", "\x00\x00", "\x5e\x6f", "\x38\x3b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x60", "\x00\x00", "\x5e\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x2f", "\x39\x42", "\x00\x00",
-  "\x5e\x72", "\x00\x00", "\x00\x00", "\x30\x6e", "\x00\x00", "\x00\x00",
-  "\x5e\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x64",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x6a", "\x00\x00",
-  "\x00\x00", "\x5e\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x4f",
-  "\x5e\x67", "\x00\x00", "\x00\x00", "\x45\x2e", "\x00\x00", "\x00\x00",
-  "\x5e\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x71",
-  "\x00\x00", "\x5e\x6b", "\x4c\x47", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5e\x66", "\x00\x00", "\x3c\x22", "\x5e\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x33\x6a", "\x00\x00", "\x5e\x68", "\x5e\x6d",
-  "\x5e\x6e", "\x42\x6c", "\x42\x5a", "\x5e\x76", "\x00\x00", "\x00\x00",
-  "\x5e\x7c", "\x00\x00", "\x00\x00", "\x5e\x7a", "\x00\x00", "\x45\x29",
-  "\x00\x00", "\x00\x00", "\x5f\x23", "\x5e\x77", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x78", "\x5e\x60", "\x00\x00",
-  "\x35\x79", "\x49\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x3f",
-  "\x00\x00", "\x00\x00", "\x39\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x33", "\x00\x00", "\x5e\x74", "\x00\x00",
-  "\x5f\x22", "\x31\x69", "\x41\x66", "\x47\x79", "\x00\x00", "\x34\x41",
-  "\x4e\x7a", "\x4c\x21", "\x44\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x7b", "\x5e\x7d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x32", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x21", "\x5e\x79", "\x00\x00", "\x5e\x73",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x43", "\x37\x69", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x2f", "\x00\x00", "\x00\x00", "\x5f\x2a",
-  "\x40\x78", "\x00\x00", "\x00\x00", "\x33\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x61", "\x00\x00", "\x5f\x33", "\x5f\x2c",
-  "\x44\x2c", "\x5f\x29", "\x44\x59", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x26", "\x00\x00",
-  "\x5f\x25", "\x00\x00", "\x5f\x2e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x28", "\x5f\x27", "\x5f\x2d", "\x00\x00", "\x40\x21", "\x00\x00",
-  "\x5f\x24", "\x5f\x30", "\x00\x00", "\x00\x00", "\x5f\x31", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x42", "\x5f\x36",
-  "\x00\x00", "\x5f\x35", "\x5f\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x3a", "\x45\x43", "\x00\x00", "\x5f\x34",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x38",
-  "\x37\x63", "\x42\x79", "\x5f\x32", "\x47\x3b", "\x00\x00", "\x00\x00",
-  "\x5f\x39", "\x5f\x3e", "\x5f\x3c", "\x00\x00", "\x00\x00", "\x5f\x3f",
-  "\x00\x00", "\x00\x00", "\x5f\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x3b", "\x39\x6a", "\x47\x28", "\x00\x00", "\x00\x00", "\x5e\x39",
-  "\x4d\x74", "\x5f\x3d", "\x00\x00", "\x5f\x41", "\x42\x75", "\x00\x00",
-  "\x5f\x40", "\x00\x00", "\x5f\x2b", "\x00\x00", "\x00\x00", "\x6f\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x45", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x49", "\x00\x00", "\x00\x00", "\x5f\x47", "\x5f\x43",
-  "\x00\x00", "\x5f\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x48",
-  "\x00\x00", "\x5f\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x4e",
-  "\x00\x00", "\x00\x00", "\x5f\x4e", "\x00\x00", "\x5f\x4b", "\x5f\x4a",
-  "\x00\x00", "\x5f\x4d", "\x46\x54", "\x5f\x4f", "\x43\x75", "\x42\x6d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x25", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x50", "\x00\x00", "\x5f\x52", "\x5f\x51",
-  "\x5e\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x53",
-  "\x46\x67", "\x5f\x54", "\x32\x50", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x74", "\x33\x25", "\x35\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3c\x5e", "\x3a\x52", "\x4f\x27", "\x3f\x66", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x56",
-  "\x5f\x55", "\x5f\x59", "\x43\x3a", "\x5f\x5c", "\x5f\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x5b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x5a", "\x45\x40", "\x30\x59", "\x4e\x75", "\x00\x00",
-  "\x00\x00", "\x5f\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x28",
-  "\x5f\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x5f", "\x00\x00",
-  "\x5f\x5d", "\x5f\x58", "\x4b\x23", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x62", "\x5f\x61", "\x31\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x64", "\x4a\x32", "\x00\x00", "\x5f\x63", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x47", "\x41\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x46", "\x4e\x7b", "\x00\x00",
-  "\x00\x00", "\x5f\x6a", "\x00\x00", "\x40\x79", "\x5f\x66", "\x5f\x6b",
-  "\x00\x00", "\x00\x00", "\x31\x6c", "\x5f\x69", "\x00\x00", "\x47\x61",
-  "\x5f\x65", "\x5f\x68", "\x3e\x48", "\x00\x00", "\x48\x51", "\x00\x00",
-  "\x00\x00", "\x5f\x6c", "\x00\x00", "\x3c\x51", "\x40\x7a", "\x5f\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x67", "\x00\x00", "\x37\x27",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x50", "\x5f\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x74\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x4f", "\x5f\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x2e", "\x5f\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x75", "\x5f\x77",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x79", "\x00\x00",
-  "\x4e\x55", "\x00\x00", "\x5f\x76", "\x00\x00", "\x5f\x78", "\x31\x6d",
-  "\x00\x00", "\x5f\x73", "\x53\x5b", "\x5f\x7a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x67", "\x3b\x38", "\x5f\x7c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x7b", "\x3f\x24", "\x52\x59",
-  "\x5f\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x21", "\x00\x00",
-  "\x5f\x6e", "\x5f\x7e", "\x00\x00", "\x00\x00", "\x60\x22", "\x47\x7a",
-  "\x60\x23", "\x00\x00", "\x00\x00", "\x60\x24", "\x60\x25", "\x60\x26",
-  "\x00\x00", "\x44\x5e", "\x00\x00", "\x60\x28", "\x60\x27", "\x00\x00",
-  "\x00\x00", "\x60\x29", "\x00\x00", "\x60\x2a", "\x00\x00", "\x00\x00",
-  "\x3c\x5f", "\x49\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x6c",
-  "\x60\x2b", "\x60\x2c", "\x41\x56", "\x3c\x24", "\x60\x2d", "\x60\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x2f",
-  "\x4a\x52", "\x48\x47", "\x00\x00", "\x00\x00", "\x60\x30", "\x47\x57",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x2d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x31",
-  "\x32\x67", "\x00\x00", "\x35\x6d", "\x00\x00", "\x4c\x46", "\x00\x00",
-  "\x4c\x36", "\x00\x00", "\x32\x34", "\x4f\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4b\x52", "\x00\x00", "\x4a\x2a", "\x40\x37",
-  "\x00\x00", "\x60\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x46\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x23", "\x60\x33",
-  "\x00\x00", "\x3a\x54", "\x60\x35", "\x60\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x36", "\x60\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x38", "\x35\x3e", "\x00\x00", "\x60\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x3a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x24", "\x00\x00", "\x00\x00", "\x48\x48",
-  "\x00\x00", "\x00\x00", "\x60\x3c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x75", "\x00\x00", "\x00\x00", "\x60\x3b", "\x36\x38", "\x60\x3d",
-  "\x60\x3f", "\x00\x00", "\x60\x3e", "\x60\x40", "\x00\x00", "\x38\x51",
-  "\x00\x00", "\x60\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x36\x69", "\x00\x00", "\x41\x40", "\x00\x00", "\x39\x7d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x43", "\x60\x44", "\x60\x42",
-  "\x3c\x6d", "\x00\x00", "\x00\x00", "\x46\x48", "\x36\x39", "\x60\x46",
-  "\x43\x2c", "\x60\x45", "\x00\x00", "\x00\x00", "\x4f\x35", "\x47\x62",
-  "\x60\x49", "\x60\x4b", "\x60\x48", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x54", "\x60\x4a", "\x60\x4c", "\x00\x00", "\x4e\x44", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x4f", "\x43\x76", "\x47\x2d", "\x00\x00",
-  "\x00\x00", "\x38\x25", "\x60\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x4d", "\x00\x00", "\x4d\x31", "\x4d\x32", "\x60\x51",
-  "\x31\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x76",
-  "\x3b\x62", "\x60\x52", "\x60\x53", "\x60\x55", "\x3d\x43", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x57", "\x00\x00", "\x60\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x58",
-  "\x00\x00", "\x33\x4d", "\x00\x00", "\x00\x00", "\x60\x5a", "\x00\x00",
-  "\x00\x00", "\x60\x59", "\x00\x00", "\x60\x5c", "\x60\x5b", "\x38\x3c",
-  "\x00\x00", "\x00\x00", "\x4e\x28", "\x00\x00", "\x36\x4c", "\x00\x00",
-  "\x32\x26", "\x36\x6a", "\x34\x61", "\x4e\x68", "\x60\x5e", "\x60\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x61", "\x00\x00",
-  "\x32\x51", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x60\x5d", "\x00\x00", "\x3b\x39", "\x00\x00", "\x00\x00", "\x44\x41",
-  "\x60\x5f", "\x60\x64", "\x00\x00", "\x3c\x6e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x3e", "\x00\x00", "\x00\x00", "\x48\x49", "\x60\x63",
-  "\x00\x00", "\x00\x00", "\x60\x7e", "\x60\x69", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x3d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x35\x65", "\x00\x00", "\x60\x66", "\x4d\x7d",
-  "\x00\x00", "\x00\x00", "\x4e\x30", "\x42\x76", "\x00\x00", "\x00\x00",
-  "\x60\x68", "\x60\x6a", "\x4e\x56", "\x36\x57", "\x48\x7c", "\x47\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x6b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x6d", "\x00\x00", "\x60\x70", "\x60\x6c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x6f", "\x38\x6a", "\x31\x4d",
-  "\x60\x71", "\x00\x00", "\x3f\x70", "\x60\x6e", "\x4e\x5c", "\x00\x00",
-  "\x00\x00", "\x60\x74", "\x74\x24", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x72", "\x60\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x67", "\x60\x73", "\x00\x00", "\x00\x00", "\x3a\x3c",
-  "\x00\x00", "\x00\x00", "\x60\x76", "\x60\x77", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4d\x7e", "\x60\x78", "\x60\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x7a", "\x34\x44", "\x3c\x25", "\x60\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x7c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x7d", "\x31\x3b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x21", "\x00\x00", "\x49\x3b", "\x61\x22", "\x00\x00",
-  "\x00\x00", "\x34\x24", "\x61\x23", "\x00\x00", "\x61\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x25", "\x00\x00", "\x61\x27",
-  "\x61\x28", "\x61\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x53",
-  "\x61\x2a", "\x61\x29", "\x61\x2c", "\x61\x2b", "\x61\x2d", "\x61\x2e",
-  "\x61\x30", "\x61\x2f", "\x00\x00", "\x00\x00", "\x39\x79", "\x00\x00",
-  "\x61\x32", "\x00\x00", "\x61\x31", "\x00\x00", "\x00\x00", "\x34\x45",
-  "\x00\x00", "\x3f\x53", "\x00\x00", "\x45\x3c", "\x00\x00", "\x61\x33",
-  "\x40\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x3a", "\x00\x00",
-  "\x31\x79", "\x61\x34", "\x00\x00", "\x4d\x51", "\x00\x00", "\x00\x00",
-  "\x4a\x63", "\x61\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x44",
-  "\x4d\x33", "\x39\x43", "\x3f\x3d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x4b", "\x52\x34", "\x00\x00", "\x44\x2e", "\x32\x68", "\x61\x36",
-  "\x61\x37", "\x00\x00", "\x61\x3c", "\x00\x00", "\x00\x00", "\x61\x3a",
-  "\x61\x39", "\x5a\x42", "\x33\x26", "\x61\x38", "\x00\x00", "\x30\x5a",
-  "\x00\x00", "\x48\x2a", "\x00\x00", "\x00\x00", "\x48\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x31", "\x61\x3d", "\x61\x3b",
-  "\x43\x5c", "\x40\x26", "\x00\x00", "\x00\x00", "\x48\x2b", "\x00\x00",
-  "\x49\x2d", "\x00\x00", "\x61\x3f", "\x4e\x2c", "\x37\x4d", "\x61\x40",
-  "\x00\x00", "\x61\x3e", "\x48\x56", "\x61\x41", "\x00\x00", "\x61\x42",
-  "\x00\x00", "\x00\x00", "\x30\x5b", "\x00\x00", "\x00\x00", "\x3e\x76",
-  "\x61\x47", "\x00\x00", "\x61\x44", "\x46\x6d", "\x61\x43", "\x35\x26",
-  "\x00\x00", "\x00\x00", "\x61\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x61\x45", "\x61\x46", "\x00\x00", "\x61\x49", "\x61\x48", "\x49\x25",
-  "\x00\x00", "\x00\x00", "\x41\x42", "\x41\x41", "\x00\x00", "\x35\x3f",
-  "\x00\x00", "\x00\x00", "\x61\x4b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x4c", "\x00\x00", "\x00\x00", "\x61\x4d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x4f",
-  "\x00\x00", "\x61\x4e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x57", "\x48\x68", "\x61\x51", "\x00\x00", "\x61\x53",
-  "\x00\x00", "\x00\x00", "\x61\x55", "\x3f\x3e", "\x00\x00", "\x00\x00",
-  "\x61\x56", "\x61\x54", "\x3c\x40", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x61\x50", "\x61\x52", "\x00\x00", "\x49\x42", "\x00\x00", "\x3e\x49",
-  "\x00\x00", "\x00\x00", "\x61\x59", "\x00\x00", "\x00\x00", "\x61\x58",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x5a", "\x00\x00",
-  "\x3c\x26", "\x3a\x2f", "\x00\x00", "\x00\x00", "\x45\x77", "\x61\x5b",
-  "\x00\x00", "\x44\x4b", "\x00\x00", "\x00\x00", "\x61\x5d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x21", "\x61\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x69", "\x61\x62", "\x00\x00",
-  "\x61\x64", "\x61\x65", "\x43\x54", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x63", "\x00\x00", "\x61\x60", "\x00\x00",
-  "\x61\x5e", "\x61\x5f", "\x00\x00", "\x61\x61", "\x61\x68", "\x00\x00",
-  "\x61\x66", "\x00\x00", "\x61\x67", "\x61\x69", "\x61\x6b", "\x61\x6c",
-  "\x61\x6d", "\x00\x00", "\x61\x6e", "\x00\x00", "\x00\x00", "\x61\x6a",
-  "\x61\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x6f", "\x61\x71",
-  "\x4e\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x74", "\x61\x72",
-  "\x61\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x62", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4a\x4a", "\x00\x00", "\x61\x76", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x77", "\x61\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x7c", "\x61\x79", "\x61\x7a", "\x61\x7b", "\x00\x00",
-  "\x61\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x7e", "\x00\x00",
-  "\x62\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x22", "\x00\x00",
-  "\x62\x23", "\x00\x00", "\x48\x2f", "\x45\x50", "\x62\x24", "\x47\x72",
-  "\x49\x34", "\x00\x00", "\x62\x25", "\x00\x00", "\x00\x00", "\x62\x26",
-  "\x45\x2a", "\x00\x00", "\x33\x27", "\x39\x44", "\x62\x27", "\x00\x00",
-  "\x00\x00", "\x62\x28", "\x00\x00", "\x00\x00", "\x62\x29", "\x00\x00",
-  "\x3b\x29", "\x00\x00", "\x00\x00", "\x62\x2b", "\x00\x00", "\x00\x00",
-  "\x62\x2a", "\x00\x00", "\x00\x00", "\x62\x2c", "\x62\x2d", "\x48\x69",
-  "\x00\x00", "\x62\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x2f",
-  "\x00\x00", "\x00\x00", "\x73\x69", "\x62\x30", "\x62\x31", "\x62\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x2e", "\x00\x00",
-  "\x00\x00", "\x62\x33", "\x47\x56", "\x00\x00", "\x00\x00", "\x4b\x5f",
-  "\x00\x00", "\x31\x4e", "\x00\x00", "\x31\x57", "\x00\x00", "\x00\x00",
-  "\x62\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x35", "\x45\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x39", "\x5d\x39", "\x00\x00", "\x62\x37",
-  "\x4c\x41", "\x00\x00", "\x62\x38", "\x00\x00", "\x34\x46", "\x48\x57",
-  "\x62\x39", "\x00\x00", "\x62\x3a", "\x00\x00", "\x00\x00", "\x62\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4c\x55", "\x00\x00", "\x44\x3e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x6a", "\x00\x00", "\x00\x00", "\x62\x3d", "\x00\x00",
-  "\x00\x00", "\x3d\x62", "\x00\x00", "\x00\x00", "\x3e\x4a", "\x00\x00",
-  "\x00\x00", "\x62\x40", "\x00\x00", "\x00\x00", "\x62\x3f", "\x62\x3e",
-  "\x48\x7d", "\x00\x00", "\x34\x47", "\x38\x29", "\x62\x46", "\x00\x00",
-  "\x00\x00", "\x62\x43", "\x3f\x3f", "\x4c\x32", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x62\x42", "\x62\x44", "\x62\x45", "\x00\x00", "\x00\x00",
-  "\x62\x41", "\x62\x47", "\x62\x48", "\x00\x00", "\x44\x2f", "\x00\x00",
-  "\x34\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x65", "\x62\x49",
-  "\x62\x4a", "\x62\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3f\x67", "\x00\x00", "\x46\x44", "\x00\x00", "\x62\x4e",
-  "\x4b\x53", "\x00\x00", "\x62\x4b", "\x00\x00", "\x00\x00", "\x62\x4c",
-  "\x62\x51", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x50",
-  "\x62\x4f", "\x62\x53", "\x00\x00", "\x00\x00", "\x62\x52", "\x00\x00",
-  "\x00\x00", "\x62\x54", "\x62\x56", "\x00\x00", "\x62\x55", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x4d", "\x3d\x56", "\x4e\x46",
-  "\x00\x00", "\x00\x00", "\x62\x57", "\x00\x00", "\x00\x00", "\x46\x37",
-  "\x00\x00", "\x00\x00", "\x62\x58", "\x00\x00", "\x00\x00", "\x62\x59",
-  "\x00\x00", "\x62\x5d", "\x62\x5b", "\x62\x5c", "\x00\x00", "\x62\x5a",
-  "\x62\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x5f", "\x62\x60", "\x00\x00", "\x00\x00", "\x62\x61", "\x4c\x37",
-  "\x62\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x70", "\x62\x63", "\x00\x00", "\x43\x4e", "\x00\x00", "\x47\x6a",
-  "\x00\x00", "\x36\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x3b",
-  "\x62\x64", "\x36\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x50",
-  "\x62\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x3d", "\x62\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x62\x67", "\x00\x00", "\x38\x26", "\x3a\x55", "\x62\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x56", "\x3a\x56",
-  "\x35\x4e", "\x4b\x24", "\x00\x00", "\x47\x4b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x6b", "\x3e\x4b", "\x4e\x32", "\x39\x45",
-  "\x00\x00", "\x00\x00", "\x38\x27", "\x00\x00", "\x00\x00", "\x48\x23",
-  "\x00\x00", "\x62\x6d", "\x62\x6f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x38\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x6e", "\x44\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x71", "\x33\x37", "\x62\x6c", "\x00\x00", "\x00\x00", "\x48\x6a",
-  "\x00\x00", "\x31\x30", "\x00\x00", "\x3a\x6c", "\x00\x00", "\x4f\x52",
-  "\x00\x00", "\x00\x00", "\x62\x70", "\x62\x72", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x4b", "\x00\x00", "\x40\x59", "\x62\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x73", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x33\x4e", "\x00\x00", "\x62\x7b", "\x00\x00",
-  "\x62\x7a", "\x00\x00", "\x00\x00", "\x3c\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x62\x7c", "\x62\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x7d", "\x62\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x48\x58", "\x62\x76", "\x00\x00", "\x00\x00", "\x62\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x22", "\x63\x21",
-  "\x4b\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x7e", "\x00\x00",
-  "\x00\x00", "\x30\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x24", "\x63\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x4c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x25",
-  "\x41\x43", "\x00\x00", "\x00\x00", "\x63\x27", "\x63\x26", "\x63\x28",
-  "\x62\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x6a", "\x63\x2a",
-  "\x63\x29", "\x3c\x28", "\x00\x00", "\x4e\x69", "\x00\x00", "\x3c\x52",
-  "\x00\x00", "\x63\x2b", "\x37\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x35\x40", "\x35\x27", "\x3b\x63", "\x4d\x34",
-  "\x00\x00", "\x00\x00", "\x63\x31", "\x00\x00", "\x63\x30", "\x41\x44",
-  "\x63\x2d", "\x00\x00", "\x00\x00", "\x63\x2f", "\x00\x00", "\x00\x00",
-  "\x3d\x4b", "\x3f\x40", "\x63\x2e", "\x63\x2c", "\x00\x00", "\x47\x2a",
-  "\x00\x00", "\x00\x00", "\x3e\x4d", "\x00\x00", "\x00\x00", "\x49\x3c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x57", "\x45\x78",
-  "\x00\x00", "\x00\x00", "\x63\x32", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x33", "\x63\x49", "\x36\x58", "\x00\x00", "\x00\x00",
-  "\x4f\x3d", "\x41\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x34", "\x00\x00", "\x00\x00", "\x32\x52", "\x44\x77", "\x4a\x21",
-  "\x63\x35", "\x35\x7a", "\x63\x36", "\x00\x00", "\x00\x00", "\x63\x38",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x39", "\x00\x00", "\x47\x29",
-  "\x00\x00", "\x00\x00", "\x63\x3a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x63\x3b", "\x63\x3c", "\x00\x00", "\x00\x00",
-  "\x36\x59", "\x32\x53", "\x46\x45", "\x3d\x28", "\x3b\x64", "\x63\x3d",
-  "\x00\x00", "\x3d\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x4a", "\x49\x43", "\x00\x00", "\x00\x00", "\x63\x3e",
-  "\x00\x00", "\x00\x00", "\x48\x6b", "\x41\x45", "\x00\x00", "\x63\x41",
-  "\x00\x00", "\x63\x42", "\x47\x69", "\x00\x00", "\x3f\x41", "\x63\x3f",
-  "\x00\x00", "\x43\x61", "\x00\x00", "\x00\x00", "\x63\x40", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x4e", "\x30\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x35\x29", "\x63\x43", "\x00\x00", "\x00\x00",
-  "\x44\x78", "\x00\x00", "\x63\x44", "\x40\x47", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x2d", "\x00\x00", "\x00\x00",
-  "\x49\x23", "\x63\x45", "\x63\x46", "\x43\x55", "\x00\x00", "\x4e\x47",
-  "\x00\x00", "\x00\x00", "\x63\x48", "\x63\x47", "\x3c\x6f", "\x00\x00",
-  "\x00\x00", "\x63\x4a", "\x30\x70", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x4b",
-  "\x32\x54", "\x37\x4e", "\x63\x4c", "\x39\x46", "\x39\x72", "\x00\x00",
-  "\x4a\x66", "\x63\x4e", "\x00\x00", "\x00\x00", "\x4b\x54", "\x00\x00",
-  "\x00\x00", "\x63\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x51",
-  "\x31\x4f", "\x32\x3a", "\x30\x2c", "\x63\x4f", "\x63\x51", "\x63\x52",
-  "\x3e\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x53", "\x00\x00", "\x33\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x6a",
-  "\x00\x00", "\x35\x66", "\x00\x00", "\x00\x00", "\x63\x56", "\x36\x75",
-  "\x00\x00", "\x00\x00", "\x63\x57", "\x00\x00", "\x40\x7c", "\x00\x00",
-  "\x46\x4d", "\x00\x00", "\x40\x60", "\x3a\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x58", "\x43\x62", "\x41\x6b", "\x00\x00", "\x63\x5a",
-  "\x63\x5c", "\x63\x59", "\x63\x5b", "\x37\x22", "\x63\x5d", "\x37\x26",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x67", "\x4d\x52", "\x63\x5f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x2e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x63\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x76", "\x63\x62", "\x63\x61", "\x00\x00", "\x63\x65", "\x63\x5e",
-  "\x00\x00", "\x63\x66", "\x4e\x29", "\x00\x00", "\x63\x67", "\x00\x00",
-  "\x63\x68", "\x00\x00", "\x00\x00", "\x54\x74", "\x63\x6a", "\x00\x00",
-  "\x63\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x6b", "\x63\x6c",
-  "\x00\x00", "\x4e\x35", "\x63\x6d", "\x00\x00", "\x70\x6f", "\x3e\x4f",
-  "\x63\x6e", "\x63\x6f", "\x3d\x57", "\x00\x00", "\x46\x38", "\x63\x70",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x28", "\x00\x00", "\x00\x00",
-  "\x63\x71", "\x00\x00", "\x43\x3c", "\x63\x72", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x25", "\x00\x00", "\x51\x3f",
-  "\x43\x5d", "\x3c\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x48", "\x00\x00", "\x00\x00", "\x63\x73", "\x00\x00", "\x64\x22",
-  "\x00\x00", "\x63\x76", "\x00\x00", "\x35\x68", "\x00\x00", "\x63\x75",
-  "\x64\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x74", "\x00\x00",
-  "\x3e\x50", "\x63\x78", "\x63\x79", "\x00\x00", "\x45\x2b", "\x00\x00",
-  "\x00\x00", "\x63\x7a", "\x00\x00", "\x33\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x5a", "\x49\x64", "\x00\x00", "\x63\x7c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x68", "\x63\x77", "\x00\x00",
-  "\x63\x7b", "\x63\x7d", "\x00\x00", "\x00\x00", "\x3a\x7b", "\x64\x26",
-  "\x49\x2e", "\x00\x00", "\x48\x26", "\x45\x79", "\x00\x00", "\x36\x5a",
-  "\x64\x25", "\x64\x23", "\x00\x00", "\x48\x35", "\x63\x7e", "\x43\x5e",
-  "\x45\x7b", "\x00\x00", "\x45\x7a", "\x00\x00", "\x3a\x76", "\x64\x38",
-  "\x64\x28", "\x00\x00", "\x64\x2a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x64\x2d", "\x00\x00", "\x64\x2e", "\x00\x00", "\x64\x2b",
-  "\x64\x2c", "\x00\x00", "\x00\x00", "\x64\x29", "\x64\x27", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x21", "\x4a\x4f", "\x32\x55",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x35", "\x00\x00", "\x64\x32",
-  "\x00\x00", "\x64\x37", "\x00\x00", "\x00\x00", "\x64\x36", "\x00\x00",
-  "\x47\x73", "\x4c\x27", "\x00\x00", "\x3b\x3b", "\x64\x30", "\x64\x39",
-  "\x64\x34", "\x00\x00", "\x64\x33", "\x64\x2f", "\x00\x00", "\x64\x31",
-  "\x00\x00", "\x34\x49", "\x43\x3d", "\x00\x00", "\x00\x00", "\x40\x7d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x22", "\x00\x00", "\x00\x00",
-  "\x64\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x24", "\x40\x61",
-  "\x64\x3b", "\x00\x00", "\x00\x00", "\x48\x4f", "\x00\x00", "\x64\x3f",
-  "\x4a\x53", "\x00\x00", "\x43\x5b", "\x00\x00", "\x64\x3a", "\x64\x3c",
-  "\x00\x00", "\x00\x00", "\x64\x3d", "\x64\x40", "\x00\x00", "\x00\x00",
-  "\x3c\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x46", "\x64\x45",
-  "\x64\x44", "\x00\x00", "\x00\x00", "\x64\x41", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4f\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x64\x4a", "\x00\x00", "\x00\x00", "\x64\x4e", "\x64\x4b",
-  "\x64\x47", "\x64\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x64\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x42",
-  "\x52\x55", "\x64\x49", "\x64\x43", "\x00\x00", "\x00\x00", "\x64\x4c",
-  "\x64\x52", "\x00\x00", "\x34\x4a", "\x00\x00", "\x64\x4f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x64\x50", "\x00\x00", "\x00\x00", "\x64\x51",
-  "\x64\x54", "\x64\x53", "\x48\x76", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x64\x55", "\x4e\x7c", "\x4a\x6d", "\x64\x5a", "\x00\x00",
-  "\x00\x00", "\x64\x57", "\x64\x56", "\x40\x52", "\x00\x00", "\x64\x59",
-  "\x64\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x58", "\x00\x00",
-  "\x64\x5f", "\x00\x00", "\x64\x5c", "\x64\x5d", "\x64\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x64\x5e", "\x64\x60", "\x64\x61", "\x4a\x46",
-  "\x00\x00", "\x64\x62", "\x4c\x62", "\x00\x00", "\x00\x00", "\x36\x4e",
-  "\x37\x29", "\x64\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x34", "\x00\x00", "\x3f\x68", "\x00\x00", "\x4c\x30",
-  "\x00\x00", "\x00\x00", "\x64\x64", "\x00\x00", "\x4e\x33", "\x00\x00",
-  "\x00\x00", "\x47\x74", "\x00\x00", "\x41\x46", "\x47\x34", "\x00\x00",
-  "\x00\x00", "\x3d\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x40",
-  "\x00\x00", "\x64\x69", "\x64\x67", "\x00\x00", "\x64\x65", "\x34\x21",
-  "\x00\x00", "\x3e\x51", "\x64\x6a", "\x00\x00", "\x00\x00", "\x64\x68",
-  "\x00\x00", "\x64\x66", "\x64\x6e", "\x00\x00", "\x00\x00", "\x64\x6d",
-  "\x64\x6c", "\x64\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x64\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x70",
-  "\x40\x3a", "\x00\x00", "\x64\x71", "\x00\x00", "\x64\x73", "\x00\x00",
-  "\x00\x00", "\x64\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x64\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x7c", "\x00\x00", "\x64\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x64\x76", "\x00\x00", "\x4a\x35", "\x41\x6c", "\x39\x47", "\x00\x00",
-  "\x64\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x48",
-  "\x64\x79", "\x00\x00", "\x00\x00", "\x64\x7a", "\x00\x00", "\x64\x7b",
-  "\x00\x00", "\x64\x7c", "\x00\x00", "\x3b\x65", "\x00\x00", "\x64\x7d",
-  "\x37\x4f", "\x00\x00", "\x00\x00", "\x35\x6a", "\x00\x00", "\x35\x2a",
-  "\x00\x00", "\x65\x21", "\x00\x00", "\x4c\x73", "\x39\x48", "\x64\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x24", "\x4c\x66", "\x00\x00",
-  "\x47\x3c", "\x00\x00", "\x00\x00", "\x49\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3d\x63", "\x65\x23", "\x00\x00", "\x3c\x53", "\x39\x49",
-  "\x3b\x66", "\x35\x69", "\x4a\x36", "\x65\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x47", "\x4b\x42", "\x3a\x77", "\x3b\x67", "\x44\x5d",
-  "\x00\x00", "\x65\x27", "\x4e\x5f", "\x3a\x59", "\x00\x00", "\x65\x28",
-  "\x3f\x42", "\x00\x00", "\x65\x2a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x52", "\x3a\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x65\x29", "\x00\x00", "\x00\x00", "\x3d\x2a", "\x38\x3e", "\x41\x48",
-  "\x65\x25", "\x65\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x65\x26", "\x37\x50", "\x00\x00", "\x65\x2e", "\x65\x32", "\x37\x6b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x2d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x36", "\x00\x00",
-  "\x00\x00", "\x39\x4a", "\x00\x00", "\x00\x00", "\x4d\x6d", "\x30\x3c",
-  "\x65\x33", "\x00\x00", "\x00\x00", "\x35\x6b", "\x00\x00", "\x65\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x31",
-  "\x00\x00", "\x00\x00", "\x45\x7d", "\x65\x2f", "\x65\x2c", "\x00\x00",
-  "\x33\x28", "\x40\x64", "\x00\x00", "\x00\x00", "\x38\x28", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x65\x38", "\x65\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x65\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x51", "\x42\x33", "\x65\x39", "\x41\x6e", "\x00\x00",
-  "\x00\x00", "\x65\x46", "\x00\x00", "\x00\x00", "\x65\x42", "\x65\x3c",
-  "\x65\x40", "\x3c\x7a", "\x30\x5d", "\x65\x3b", "\x65\x43", "\x65\x47",
-  "\x39\x4b", "\x4c\x56", "\x00\x00", "\x44\x56", "\x65\x3d", "\x00\x00",
-  "\x00\x00", "\x65\x45", "\x00\x00", "\x65\x3a", "\x43\x3e", "\x00\x00",
-  "\x65\x3f", "\x30\x3d", "\x4c\x4a", "\x65\x3e", "\x00\x00", "\x00\x00",
-  "\x36\x5b", "\x48\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x6d",
-  "\x00\x00", "\x4e\x50", "\x3d\x6f", "\x00\x00", "\x00\x00", "\x65\x6e",
-  "\x00\x00", "\x00\x00", "\x65\x48", "\x00\x00", "\x40\x7e", "\x00\x00",
-  "\x65\x44", "\x65\x49", "\x65\x4b", "\x00\x00", "\x44\x79", "\x65\x4e",
-  "\x00\x00", "\x00\x00", "\x65\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x54", "\x34\x4b", "\x00\x00", "\x00\x00", "\x4c\x4b", "\x00\x00",
-  "\x00\x00", "\x30\x5e", "\x00\x00", "\x00\x00", "\x65\x4d", "\x00\x00",
-  "\x4e\x7d", "\x65\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x6f", "\x00\x00", "\x00\x00", "\x46\x6c", "\x65\x4f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x56", "\x65\x50", "\x65\x57",
-  "\x65\x53", "\x47\x7b", "\x00\x00", "\x00\x00", "\x3c\x4a", "\x65\x55",
-  "\x00\x00", "\x65\x52", "\x65\x58", "\x65\x51", "\x00\x00", "\x00\x00",
-  "\x3d\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x25",
-  "\x00\x00", "\x00\x00", "\x3d\x4c", "\x00\x00", "\x00\x00", "\x65\x54",
-  "\x65\x60", "\x00\x00", "\x00\x00", "\x65\x5c", "\x00\x00", "\x65\x5f",
-  "\x00\x00", "\x65\x5d", "\x65\x61", "\x65\x5b", "\x00\x00", "\x65\x41",
-  "\x40\x53", "\x00\x00", "\x00\x00", "\x48\x4b", "\x00\x00", "\x65\x5e",
-  "\x00\x00", "\x00\x00", "\x65\x59", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x21", "\x37\x52", "\x00\x00", "\x3d\x2b", "\x3f\x25", "\x41\x36",
-  "\x65\x64", "\x00\x00", "\x00\x00", "\x65\x66", "\x65\x67", "\x00\x00",
-  "\x00\x00", "\x65\x63", "\x65\x65", "\x65\x5a", "\x65\x62", "\x00\x00",
-  "\x65\x6a", "\x65\x69", "\x00\x00", "\x00\x00", "\x4b\x7a", "\x00\x00",
-  "\x00\x00", "\x37\x2b", "\x65\x68", "\x00\x00", "\x65\x6c", "\x65\x6b",
-  "\x65\x6f", "\x00\x00", "\x65\x71", "\x00\x00", "\x00\x00", "\x3b\x3c",
-  "\x65\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x72",
-  "\x65\x73", "\x00\x00", "\x00\x00", "\x65\x74", "\x00\x00", "\x65\x7a",
-  "\x45\x3b", "\x65\x76", "\x00\x00", "\x65\x75", "\x65\x77", "\x65\x78",
-  "\x00\x00", "\x65\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x65\x7b", "\x65\x7c", "\x34\x4c", "\x00\x00", "\x65\x7d", "\x00\x00",
-  "\x65\x7e", "\x66\x21", "\x66\x22", "\x66\x23", "\x66\x24", "\x00\x00",
-  "\x66\x25", "\x66\x26", "\x00\x00", "\x00\x00", "\x66\x28", "\x66\x27",
-  "\x00\x00", "\x00\x00", "\x66\x29", "\x66\x2a", "\x66\x2b", "\x66\x2e",
-  "\x66\x2c", "\x66\x2d", "\x3a\x61", "\x37\x53", "\x00\x00", "\x00\x00",
-  "\x43\x56", "\x00\x00", "\x48\x33", "\x00\x00", "\x3d\x70", "\x00\x00",
-  "\x00\x00", "\x47\x4d", "\x00\x00", "\x48\x6d", "\x66\x2f", "\x58\x6d",
-  "\x66\x30", "\x66\x32", "\x00\x00", "\x4d\x65", "\x66\x31", "\x66\x34",
-  "\x66\x33", "\x00\x00", "\x4d\x53", "\x00\x00", "\x66\x35", "\x00\x00",
-  "\x48\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x39", "\x00\x00", "\x00\x00", "\x66\x38", "\x66\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x3a", "\x37\x32", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x22", "\x35\x41", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x3e", "\x66\x3b", "\x00\x00", "\x00\x00",
-  "\x66\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x3f", "\x00\x00",
-  "\x66\x40", "\x66\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x66\x42", "\x66\x43", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x44", "\x00\x00", "\x4d\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x2c", "\x00\x00", "\x66\x46", "\x66\x45",
-  "\x3f\x69", "\x66\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x48", "\x00\x00", "\x00\x00", "\x66\x49", "\x00\x00", "\x34\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x4d", "\x00\x00",
-  "\x00\x00", "\x66\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x66\x4b", "\x00\x00", "\x4b\x5d", "\x4d\x63", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4d\x54", "\x4f\x37", "\x00\x00", "\x39\x4d",
-  "\x66\x4e", "\x3c\x54", "\x66\x4d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x66\x4f", "\x3c\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x51", "\x00\x00", "\x66\x50", "\x00\x00", "\x00\x00", "\x39\x4c",
-  "\x00\x00", "\x4c\x57", "\x66\x51", "\x66\x52", "\x00\x00", "\x00\x00",
-  "\x66\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x54",
-  "\x66\x55", "\x3c\x2a", "\x00\x00", "\x00\x00", "\x4c\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x57", "\x00\x00", "\x43\x3f",
-  "\x00\x00", "\x66\x56", "\x66\x59", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x58", "\x66\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x3b",
-  "\x00\x00", "\x66\x5b", "\x00\x00", "\x66\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x39", "\x66\x5d", "\x00\x00", "\x41\x6f", "\x66\x5e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x5f",
-  "\x4e\x7e", "\x66\x62", "\x00\x00", "\x66\x61", "\x66\x60", "\x44\x30",
-  "\x00\x00", "\x66\x63", "\x3f\x26", "\x00\x00", "\x66\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x65", "\x4f\x38", "\x66\x66", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x67", "\x66\x69", "\x66\x68",
-  "\x48\x25", "\x00\x00", "\x46\x79", "\x00\x00", "\x4f\x3e", "\x48\x29",
-  "\x66\x6b", "\x00\x00", "\x00\x00", "\x3e\x53", "\x00\x00", "\x49\x2a",
-  "\x00\x00", "\x66\x6c", "\x66\x6a", "\x00\x00", "\x34\x4e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x54", "\x3b\x68", "\x00\x00", "\x00\x00",
-  "\x48\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x2a", "\x4b\x43",
-  "\x00\x00", "\x66\x6f", "\x66\x6d", "\x00\x00", "\x39\x4e", "\x00\x00",
-  "\x39\x4f", "\x30\x69", "\x00\x00", "\x3a\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x59", "\x30\x5f", "\x66\x74",
-  "\x00\x00", "\x43\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x58", "\x00\x00", "\x42\x5b", "\x66\x76", "\x00\x00",
-  "\x00\x00", "\x66\x72", "\x66\x75", "\x66\x70", "\x00\x00", "\x66\x73",
-  "\x4b\x26", "\x00\x00", "\x00\x00", "\x38\x55", "\x00\x00", "\x00\x00",
-  "\x30\x7d", "\x66\x71", "\x66\x78", "\x00\x00", "\x66\x79", "\x00\x00",
-  "\x00\x00", "\x46\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x26", "\x47\x3d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x69", "\x00\x00", "\x00\x00",
-  "\x36\x3c", "\x40\x48", "\x4f\x46", "\x4c\x2e", "\x66\x77", "\x40\x54",
-  "\x35\x53", "\x66\x7a", "\x66\x7c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x7b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x7d", "\x00\x00", "\x43\x26", "\x00\x00",
-  "\x47\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x23",
-  "\x67\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x7e",
-  "\x00\x00", "\x00\x00", "\x3f\x55", "\x00\x00", "\x49\x65", "\x67\x25",
-  "\x00\x00", "\x67\x24", "\x39\x50", "\x4f\x53", "\x67\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x29", "\x67\x2a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x70", "\x00\x00",
-  "\x00\x00", "\x67\x28", "\x00\x00", "\x39\x78", "\x67\x27", "\x00\x00",
-  "\x00\x00", "\x67\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x32",
-  "\x4a\x22", "\x41\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x5c", "\x67\x2f", "\x00\x00", "\x67\x30", "\x67\x2c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x2d", "\x00\x00", "\x67\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x51", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x67\x36", "\x00\x00", "\x67\x32", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x66", "\x00\x00", "\x4b\x6c",
-  "\x49\x28", "\x00\x00", "\x00\x00", "\x67\x31", "\x00\x00", "\x00\x00",
-  "\x67\x34", "\x67\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x44",
-  "\x67\x37", "\x67\x38", "\x00\x00", "\x00\x00", "\x41\x37", "\x00\x00",
-  "\x67\x39", "\x00\x00", "\x00\x00", "\x67\x3b", "\x00\x00", "\x67\x3f",
-  "\x00\x00", "\x00\x00", "\x67\x3c", "\x67\x3a", "\x47\x3f", "\x67\x3d",
-  "\x00\x00", "\x67\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x32",
-  "\x00\x00", "\x67\x45", "\x67\x40", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x67\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x42", "\x00\x00",
-  "\x42\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x44",
-  "\x67\x43", "\x67\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x67\x47", "\x67\x48", "\x00\x00", "\x00\x00", "\x3f\x43", "\x00\x00",
-  "\x32\x69", "\x00\x00", "\x67\x49", "\x4e\x57", "\x00\x00", "\x3c\x2b",
-  "\x00\x00", "\x00\x00", "\x3d\x2d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3b\x6a", "\x43\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x4a", "\x67\x4b", "\x31\x31",
-  "\x00\x00", "\x67\x4c", "\x00\x00", "\x00\x00", "\x67\x4d", "\x67\x4e",
-  "\x00\x00", "\x00\x00", "\x67\x4f", "\x00\x00", "\x67\x50", "\x36\x3d",
-  "\x5a\x2a", "\x67\x51", "\x00\x00", "\x40\x65", "\x67\x52", "\x3c\x4b",
-  "\x00\x00", "\x67\x53", "\x00\x00", "\x50\x30", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x54", "\x4a\x5e", "\x34\x5c", "\x00\x00", "\x00\x00",
-  "\x41\x24", "\x3d\x58", "\x00\x00", "\x49\x71", "\x3d\x2e", "\x67\x55",
-  "\x39\x52", "\x67\x56", "\x48\x4c", "\x00\x00", "\x67\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x58", "\x00\x00", "\x42\x49",
-  "\x47\x75", "\x38\x3f", "\x67\x57", "\x41\x25", "\x67\x59", "\x44\x7a",
-  "\x67\x5b", "\x67\x5a", "\x67\x5d", "\x00\x00", "\x00\x00", "\x67\x5c",
-  "\x00\x00", "\x67\x5e", "\x00\x00", "\x00\x00", "\x67\x60", "\x00\x00",
-  "\x67\x5f", "\x00\x00", "\x34\x4f", "\x00\x00", "\x67\x61", "\x00\x00",
-  "\x67\x62", "\x67\x63", "\x00\x00", "\x00\x00", "\x3a\x31", "\x4e\x49",
-  "\x00\x00", "\x67\x65", "\x3f\x27", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x70", "\x67\x66", "\x67\x67", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x67\x68", "\x30\x72", "\x00\x00", "\x67\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x6a", "\x49\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x47", "\x00\x00", "\x67\x6c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x29",
-  "\x30\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x6b",
-  "\x67\x6e", "\x47\x4e", "\x00\x00", "\x3f\x44", "\x00\x00", "\x32\x56",
-  "\x00\x00", "\x4b\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x5d", "\x36\x5c", "\x00\x00", "\x67\x6d", "\x00\x00", "\x32\x6a",
-  "\x34\x23", "\x31\x71", "\x67\x72", "\x4e\x6a", "\x42\x5d", "\x00\x00",
-  "\x00\x00", "\x49\x44", "\x00\x00", "\x67\x7e", "\x00\x00", "\x32\x57",
-  "\x67\x7c", "\x00\x00", "\x67\x7a", "\x67\x71", "\x00\x00", "\x67\x6f",
-  "\x00\x00", "\x67\x70", "\x00\x00", "\x3c\x63", "\x36\x6c", "\x43\x77",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x51", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x51", "\x00\x00", "\x67\x74",
-  "\x67\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x79",
-  "\x67\x75", "\x67\x78", "\x4c\x50", "\x67\x77", "\x32\x58", "\x33\x7d",
-  "\x67\x7b", "\x00\x00", "\x00\x00", "\x67\x7d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x54", "\x68\x23", "\x68\x2c", "\x68\x2d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x2b", "\x68\x34", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x71", "\x00\x00", "\x00\x00",
-  "\x68\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x2a", "\x00\x00",
-  "\x68\x25", "\x68\x24", "\x00\x00", "\x68\x22", "\x68\x21", "\x43\x63",
-  "\x00\x00", "\x42\x7b", "\x68\x27", "\x68\x26", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x70", "\x37\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x41", "\x68\x28", "\x00\x00", "\x39\x53", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x71", "\x68\x3a", "\x00\x00",
-  "\x68\x3b", "\x00\x00", "\x32\x59", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x32\x2e", "\x68\x38", "\x68\x2e", "\x00\x00", "\x68\x36", "\x00\x00",
-  "\x68\x3d", "\x68\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x35",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x76", "\x00\x00",
-  "\x00\x00", "\x68\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x50", "\x68\x31", "\x68\x3c",
-  "\x00\x00", "\x68\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x68\x3e", "\x00\x00", "\x68\x30", "\x47\x7c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x69", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x39", "\x68\x4f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x68\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x7b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x46", "\x00\x00",
-  "\x36\x5d", "\x00\x00", "\x68\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x5b", "\x00\x00", "\x00\x00", "\x3e\x54", "\x00\x00",
-  "\x68\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x5a", "\x00\x00",
-  "\x00\x00", "\x45\x51", "\x68\x4a", "\x4a\x6e", "\x00\x00", "\x68\x41",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x5a", "\x38\x56", "\x49\x29",
-  "\x68\x4b", "\x00\x00", "\x68\x3f", "\x00\x00", "\x00\x00", "\x68\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x52", "\x00\x00", "\x68\x43",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x44",
-  "\x46\x3a", "\x00\x00", "\x00\x00", "\x68\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x68\x46", "\x4b\x28", "\x68\x4c", "\x30\x60", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x40", "\x68\x4e", "\x00\x00",
-  "\x68\x4d", "\x47\x6b", "\x68\x54", "\x00\x00", "\x68\x5f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x68\x62", "\x00\x00", "\x00\x00", "\x68\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x55", "\x4d\x6e", "\x68\x5e", "\x00\x00",
-  "\x00\x00", "\x4d\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x2a", "\x43\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x6b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x72",
-  "\x68\x64", "\x46\x21", "\x00\x00", "\x00\x00", "\x30\x31", "\x00\x00",
-  "\x00\x00", "\x68\x5d", "\x00\x00", "\x68\x59", "\x41\x72", "\x68\x53",
-  "\x68\x5b", "\x68\x60", "\x00\x00", "\x47\x2c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x30\x2a", "\x00\x00", "\x68\x58", "\x00\x00", "\x68\x61",
-  "\x49\x78", "\x68\x5c", "\x00\x00", "\x68\x57", "\x3e\x55", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3c\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x58", "\x00\x00", "\x00\x00", "\x49\x47", "\x00\x00", "\x00\x00",
-  "\x68\x67", "\x00\x00", "\x68\x70", "\x68\x5a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x33\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x78", "\x68\x65", "\x00\x00", "\x68\x6a",
-  "\x41\x73", "\x00\x00", "\x00\x00", "\x68\x66", "\x00\x00", "\x68\x6d",
-  "\x00\x00", "\x00\x00", "\x43\x5f", "\x00\x00", "\x68\x6e", "\x00\x00",
-  "\x00\x00", "\x4d\x56", "\x68\x63", "\x33\x38", "\x00\x00", "\x68\x69",
-  "\x00\x00", "\x00\x00", "\x68\x6c", "\x4c\x2c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x6f", "\x00\x00", "\x00\x00", "\x68\x68",
-  "\x68\x6b", "\x4b\x29", "\x00\x00", "\x4f\x21", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x73", "\x68\x7a", "\x00\x00",
-  "\x00\x00", "\x68\x72", "\x3c\x43", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x51", "\x4a\x4e", "\x00\x00", "\x4c\x22",
-  "\x68\x79", "\x68\x78", "\x00\x00", "\x68\x74", "\x68\x75", "\x00\x00",
-  "\x31\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x77",
-  "\x00\x00", "\x68\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x68\x76", "\x30\x7e", "\x42\x22", "\x4a\x43", "\x00\x00", "\x00\x00",
-  "\x68\x7b", "\x69\x21", "\x00\x00", "\x48\x59", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x7e", "\x3e\x56", "\x3c\x49", "\x69\x23",
-  "\x00\x00", "\x00\x00", "\x36\x3e", "\x69\x24", "\x00\x00", "\x49\x79",
-  "\x68\x7d", "\x00\x00", "\x68\x56", "\x68\x7c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x4f", "\x46\x22", "\x49\x73", "\x00\x00",
-  "\x00\x00", "\x69\x2b", "\x69\x31", "\x69\x32", "\x00\x00", "\x69\x25",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x76", "\x00\x00", "\x00\x00",
-  "\x69\x2f", "\x69\x27", "\x00\x00", "\x69\x29", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x33", "\x69\x28", "\x00\x00",
-  "\x00\x00", "\x69\x2c", "\x00\x00", "\x00\x00", "\x31\x72", "\x00\x00",
-  "\x46\x65", "\x00\x00", "\x69\x2d", "\x69\x30", "\x69\x26", "\x00\x00",
-  "\x41\x26", "\x00\x00", "\x69\x2a", "\x3b\x27", "\x3f\x45", "\x37\x30",
-  "\x4c\x74", "\x00\x00", "\x4c\x79", "\x3d\x72", "\x69\x37", "\x69\x35",
-  "\x4f\x4e", "\x69\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x75",
-  "\x00\x00", "\x69\x36", "\x69\x38", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x39", "\x69\x3c", "\x69\x3a", "\x46\x23", "\x69\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x4d", "\x69\x2e", "\x3d\x73",
-  "\x00\x00", "\x69\x3d", "\x69\x42", "\x41\x74", "\x00\x00", "\x00\x00",
-  "\x69\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x22", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x43", "\x41\x49", "\x00\x00", "\x00\x00",
-  "\x69\x3e", "\x69\x40", "\x69\x3f", "\x00\x00", "\x00\x00", "\x5d\x31",
-  "\x5d\x22", "\x00\x00", "\x00\x00", "\x69\x45", "\x69\x44", "\x4d\x76",
-  "\x00\x00", "\x62\x3c", "\x69\x46", "\x69\x47", "\x69\x48", "\x38\x57",
-  "\x00\x00", "\x35\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x4a",
-  "\x51\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x75",
-  "\x00\x00", "\x4e\x3a", "\x00\x00", "\x36\x73", "\x69\x4b", "\x69\x4c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x6e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x4d", "\x46\x7a", "\x00\x00",
-  "\x30\x3a", "\x32\x63", "\x69\x52", "\x69\x53", "\x69\x4e", "\x00\x00",
-  "\x3b\x3d", "\x69\x4f", "\x47\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x50", "\x69\x51", "\x69\x5b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x55", "\x69\x58", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x54", "\x69\x56", "\x00\x00", "\x69\x57",
-  "\x3c\x58", "\x00\x00", "\x69\x59", "\x00\x00", "\x43\x41", "\x00\x00",
-  "\x37\x56", "\x33\x42", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x3f", "\x00\x00", "\x69\x61", "\x00\x00", "\x00\x00", "\x69\x5d",
-  "\x69\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x5e", "\x00\x00",
-  "\x00\x00", "\x69\x5f", "\x49\x48", "\x48\x5a", "\x69\x62", "\x42\x7d",
-  "\x69\x6c", "\x00\x00", "\x69\x68", "\x00\x00", "\x00\x00", "\x32\x6b",
-  "\x00\x00", "\x69\x66", "\x00\x00", "\x4b\x2a", "\x69\x67", "\x00\x00",
-  "\x00\x00", "\x69\x64", "\x00\x00", "\x69\x65", "\x69\x6a", "\x69\x6d",
-  "\x00\x00", "\x00\x00", "\x69\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x69", "\x69\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x58", "\x00\x00", "\x69\x74", "\x00\x00", "\x4c\x2a",
-  "\x69\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x73", "\x69\x6e",
-  "\x00\x00", "\x00\x00", "\x69\x70", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x6f", "\x40\x66",
-  "\x00\x00", "\x4f\x39", "\x69\x78", "\x00\x00", "\x69\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x21", "\x00\x00", "\x3f\x2a",
-  "\x00\x00", "\x69\x7b", "\x00\x00", "\x69\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x76", "\x69\x75", "\x00\x00",
-  "\x00\x00", "\x6a\x22", "\x00\x00", "\x00\x00", "\x32\x5c", "\x00\x00",
-  "\x69\x7c", "\x00\x00", "\x6a\x23", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x7a", "\x00\x00", "\x44\x33", "\x00\x00", "\x69\x77", "\x47\x68",
-  "\x00\x00", "\x00\x00", "\x6a\x27", "\x4d\x3b", "\x6a\x26", "\x00\x00",
-  "\x00\x00", "\x6a\x25", "\x6a\x2e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6a\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x30", "\x4d\x66",
-  "\x6a\x33", "\x00\x00", "\x6a\x2a", "\x00\x00", "\x00\x00", "\x6a\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x2f", "\x00\x00", "\x6a\x32",
-  "\x6a\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x29", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x2c", "\x00\x00", "\x6a\x3d",
-  "\x6a\x36", "\x6a\x34", "\x00\x00", "\x00\x00", "\x6a\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6a\x3a", "\x6a\x3b", "\x00\x00", "\x33\x2a",
-  "\x00\x00", "\x35\x42", "\x00\x00", "\x00\x00", "\x6a\x39", "\x6a\x24",
-  "\x6a\x38", "\x6a\x3c", "\x6a\x37", "\x00\x00", "\x6a\x3e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6a\x40", "\x6a\x3f", "\x6a\x42", "\x6a\x41",
-  "\x69\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x46", "\x6a\x43",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x44", "\x00\x00",
-  "\x00\x00", "\x6a\x45", "\x00\x00", "\x6a\x47", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x6c", "\x00\x00", "\x6a\x49", "\x00\x00",
-  "\x6a\x48", "\x00\x00", "\x3d\x30", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x54", "\x5e\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6a\x4a", "\x3d\x51", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x39", "\x00\x00", "\x6a\x4b", "\x00\x00", "\x31\x52",
-  "\x00\x00", "\x3e\x57", "\x6a\x4c", "\x00\x00", "\x00\x00", "\x39\x55",
-  "\x6a\x4d", "\x30\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x3d", "\x00\x00", "\x00\x00", "\x6a\x4e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x6a", "\x00\x00", "\x6a\x55", "\x00\x00",
-  "\x00\x00", "\x6a\x52", "\x00\x00", "\x43\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x53", "\x6a\x50", "\x36\x5e",
-  "\x00\x00", "\x6a\x4f", "\x6a\x56", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x36", "\x00\x00", "\x00\x00", "\x42\x5e",
-  "\x00\x00", "\x6a\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6a\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x35", "\x6a\x57",
-  "\x00\x00", "\x6a\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6a\x51", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x5b", "\x00\x00",
-  "\x6a\x5d", "\x48\x6f", "\x00\x00", "\x00\x00", "\x6a\x59", "\x00\x00",
-  "\x6a\x5e", "\x6a\x60", "\x00\x00", "\x00\x00", "\x38\x53", "\x6a\x54",
-  "\x00\x00", "\x30\x41", "\x6a\x5f", "\x00\x00", "\x3a\x5b", "\x4e\x76",
-  "\x6a\x61", "\x6a\x62", "\x41\x75", "\x4e\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6a\x63", "\x4d\x35", "\x00\x00", "\x00\x00",
-  "\x6a\x64", "\x6a\x65", "\x00\x00", "\x00\x00", "\x4a\x64", "\x6a\x66",
-  "\x00\x00", "\x3a\x40", "\x00\x00", "\x4e\x23", "\x6a\x6b", "\x6a\x6c",
-  "\x3e\x58", "\x6a\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x67",
-  "\x6a\x67", "\x00\x00", "\x00\x00", "\x6a\x69", "\x40\x3d", "\x3f\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x68", "\x00\x00", "\x6a\x6d",
-  "\x00\x00", "\x00\x00", "\x4a\x23", "\x00\x00", "\x00\x00", "\x6a\x6f",
-  "\x00\x00", "\x6a\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x6c",
-  "\x00\x00", "\x4b\x2b", "\x6a\x70", "\x6a\x7c", "\x6a\x72", "\x6a\x73",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x74", "\x6a\x75",
-  "\x6a\x79", "\x00\x00", "\x6a\x7a", "\x00\x00", "\x00\x00", "\x6a\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x76",
-  "\x00\x00", "\x6a\x71", "\x6a\x77", "\x6a\x7b", "\x70\x37", "\x32\x28",
-  "\x6a\x7e", "\x36\x5f", "\x6a\x7d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x22", "\x00\x00", "\x6b\x21", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x24", "\x00\x00", "\x00\x00", "\x6b\x23", "\x00\x00", "\x6b\x25",
-  "\x00\x00", "\x00\x00", "\x3d\x31", "\x00\x00", "\x6b\x26", "\x00\x00",
-  "\x00\x00", "\x6b\x27", "\x6b\x28", "\x40\x3e", "\x00\x00", "\x4d\x57",
-  "\x00\x00", "\x6b\x29", "\x00\x00", "\x00\x00", "\x4a\x24", "\x47\x46",
-  "\x6b\x2a", "\x00\x00", "\x6b\x2b", "\x38\x2b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x2c",
-  "\x00\x00", "\x00\x00", "\x3b\x6b", "\x47\x41", "\x6b\x2d", "\x00\x00",
-  "\x33\x50", "\x6b\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x30", "\x4d\x77", "\x00\x00", "\x6b\x2f", "\x3f\x46", "\x00\x00",
-  "\x6b\x31", "\x00\x00", "\x00\x00", "\x6b\x32", "\x00\x00", "\x00\x00",
-  "\x6b\x33", "\x34\x51", "\x6b\x34", "\x00\x00", "\x00\x00", "\x6b\x35",
-  "\x00\x00", "\x6b\x36", "\x6b\x37", "\x33\x51", "\x6b\x38", "\x00\x00",
-  "\x6b\x39", "\x6b\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x72", "\x00\x00", "\x00\x00", "\x3f\x28", "\x6b\x3b",
-  "\x6b\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x3d", "\x38\x40",
-  "\x00\x00", "\x44\x7b", "\x6b\x3e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x57", "\x00\x00", "\x3f\x56", "\x00\x00", "\x6b\x41",
-  "\x00\x00", "\x46\x24", "\x00\x00", "\x6b\x40", "\x00\x00", "\x00\x00",
-  "\x37\x31", "\x00\x00", "\x00\x00", "\x6b\x3f", "\x42\x77", "\x35\x2d",
-  "\x00\x00", "\x00\x00", "\x6b\x42", "\x00\x00", "\x6b\x43", "\x00\x00",
-  "\x3e\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x6d", "\x00\x00",
-  "\x6b\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x2c",
-  "\x00\x00", "\x00\x00", "\x40\x5f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x76", "\x00\x00", "\x4c\x75", "\x41\x4a", "\x00\x00", "\x6b\x45",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x47", "\x43\x70", "\x3e\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x49", "\x00\x00", "\x6b\x4a",
-  "\x3a\x3e", "\x42\x42", "\x6b\x48", "\x00\x00", "\x3e\x5b", "\x49\x3e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x47",
-  "\x00\x00", "\x00\x00", "\x3b\x6c", "\x00\x00", "\x31\x53", "\x00\x00",
-  "\x6b\x4e", "\x37\x58", "\x00\x00", "\x00\x00", "\x3b\x6e", "\x00\x00",
-  "\x00\x00", "\x3b\x6d", "\x00\x00", "\x4f\x4d", "\x6b\x4d", "\x6b\x4c",
-  "\x41\x27", "\x00\x00", "\x35\x4d", "\x4f\x43", "\x33\x3a", "\x3e\x5c",
-  "\x6b\x4b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x50", "\x00\x00", "\x6b\x51", "\x6b\x4f", "\x00\x00", "\x38\x58",
-  "\x00\x00", "\x4d\x40", "\x00\x00", "\x00\x00", "\x3b\x6f", "\x47\x27",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x54", "\x00\x00", "\x40\x40",
-  "\x00\x00", "\x43\x42", "\x00\x00", "\x00\x00", "\x4d\x36", "\x00\x00",
-  "\x6b\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x6c", "\x00\x00",
-  "\x40\x3f", "\x6b\x53", "\x00\x00", "\x6b\x58", "\x38\x6d", "\x6b\x55",
-  "\x6b\x56", "\x00\x00", "\x6b\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x40\x62", "\x46\x49", "\x00\x00", "\x00\x00", "\x43\x2f", "\x00\x00",
-  "\x32\x5d", "\x48\x70", "\x00\x00", "\x00\x00", "\x35\x43", "\x00\x00",
-  "\x00\x00", "\x44\x34", "\x00\x00", "\x00\x00", "\x6b\x5b", "\x00\x00",
-  "\x6b\x59", "\x00\x00", "\x00\x00", "\x43\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x41", "\x34\x52", "\x6b\x5a", "\x00\x00", "\x3f\x5b",
-  "\x00\x00", "\x00\x00", "\x4e\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x5c", "\x6b\x67",
-  "\x44\x35", "\x00\x00", "\x6b\x66", "\x00\x00", "\x6b\x63", "\x6b\x6b",
-  "\x6b\x64", "\x00\x00", "\x6b\x60", "\x00\x00", "\x44\x7c", "\x6b\x5f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x5d", "\x00\x00", "\x4d\x21",
-  "\x3b\x70", "\x00\x00", "\x00\x00", "\x6b\x61", "\x00\x00", "\x6b\x5e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x65", "\x3d\x74", "\x00\x00",
-  "\x38\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x7a", "\x00\x00",
-  "\x4b\x45", "\x31\x5a", "\x30\x62", "\x00\x00", "\x46\x25", "\x00\x00",
-  "\x00\x00", "\x6b\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x68", "\x00\x00", "\x46\x66", "\x00\x00", "\x6b\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x62", "\x00\x00", "\x6b\x6c", "\x6b\x6e",
-  "\x00\x00", "\x38\x2c", "\x6b\x6a", "\x39\x56", "\x00\x00", "\x3c\x55",
-  "\x00\x00", "\x00\x00", "\x6b\x6f", "\x4d\x58", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x72", "\x00\x00", "\x6b\x75", "\x00\x00",
-  "\x00\x00", "\x6b\x73", "\x49\x35", "\x6b\x70", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x74", "\x00\x00", "\x00\x00", "\x6b\x76",
-  "\x6b\x7a", "\x00\x00", "\x00\x00", "\x6b\x77", "\x00\x00", "\x6b\x79",
-  "\x6b\x78", "\x6b\x7b", "\x00\x00", "\x3c\x31", "\x00\x00", "\x6b\x7d",
-  "\x6b\x7c", "\x49\x68", "\x00\x00", "\x00\x00", "\x6c\x21", "\x37\x59",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x7e", "\x6c\x22",
-  "\x00\x00", "\x00\x00", "\x6c\x23", "\x35\x44", "\x66\x41", "\x3e\x79",
-  "\x00\x00", "\x6c\x24", "\x00\x00", "\x00\x00", "\x38\x6e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x25", "\x00\x00",
-  "\x00\x00", "\x6c\x26", "\x00\x00", "\x00\x00", "\x3b\x3e", "\x5a\x4e",
-  "\x00\x00", "\x6c\x27", "\x00\x00", "\x6c\x28", "\x00\x00", "\x3d\x32",
-  "\x00\x00", "\x6c\x29", "\x6c\x2a", "\x00\x00", "\x00\x00", "\x6c\x2b",
-  "\x00\x00", "\x00\x00", "\x6c\x2c", "\x6c\x2d", "\x43\x2b", "\x00\x00",
-  "\x00\x00", "\x6c\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6c\x30", "\x00\x00", "\x6c\x2f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x26", "\x00\x00", "\x6c\x31", "\x00\x00", "\x4b\x2d",
-  "\x00\x00", "\x6c\x32", "\x00\x00", "\x6c\x33", "\x00\x00", "\x6c\x34",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x5a", "\x3e\x5d", "\x6c\x36",
-  "\x39\x6b", "\x50\x2e", "\x6c\x37", "\x6c\x38", "\x49\x3f", "\x6c\x39",
-  "\x00\x00", "\x6c\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6c\x3a", "\x00\x00", "\x00\x00", "\x6c\x3c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x3b", "\x6c\x3d", "\x00\x00", "\x4b\x46",
-  "\x6c\x3e", "\x6c\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6c\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x2d", "\x44\x67",
-  "\x00\x00", "\x49\x69", "\x3a\x62", "\x39\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x49\x4f", "\x32\x5f", "\x48\x4e", "\x6c\x45",
-  "\x34\x53", "\x40\x55", "\x6c\x44", "\x6c\x49", "\x43\x79", "\x4c\x63",
-  "\x00\x00", "\x6c\x47", "\x6c\x48", "\x35\x2e", "\x00\x00", "\x6c\x4a",
-  "\x47\x63", "\x42\x5f", "\x00\x00", "\x00\x00", "\x48\x71", "\x45\x3d",
-  "\x6c\x46", "\x00\x00", "\x4b\x47", "\x32\x6c", "\x6c\x4c", "\x4f\x28",
-  "\x44\x42", "\x4f\x45", "\x00\x00", "\x00\x00", "\x3b\x71", "\x6c\x4b",
-  "\x00\x00", "\x42\x31", "\x00\x00", "\x00\x00", "\x6c\x5c", "\x41\x28",
-  "\x00\x00", "\x00\x00", "\x46\x78", "\x00\x00", "\x49\x50", "\x6c\x4f",
-  "\x3b\x3f", "\x3b\x72", "\x00\x00", "\x3e\x5e", "\x00\x00", "\x47\x65",
-  "\x00\x00", "\x38\x2d", "\x6c\x4e", "\x6c\x4d", "\x00\x00", "\x49\x6a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x41", "\x00\x00", "\x00\x00",
-  "\x45\x52", "\x6c\x51", "\x6c\x52", "\x39\x58", "\x6c\x50", "\x6c\x53",
-  "\x6c\x54", "\x00\x00", "\x6c\x56", "\x42\x23", "\x00\x00", "\x6c\x55",
-  "\x34\x66", "\x00\x00", "\x6c\x58", "\x00\x00", "\x6c\x57", "\x6c\x59",
-  "\x00\x00", "\x00\x00", "\x6c\x5b", "\x6c\x5d", "\x00\x00", "\x6c\x5e",
-  "\x40\x56", "\x00\x00", "\x3c\x4f", "\x6c\x5f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x52", "\x00\x00", "\x6c\x60", "\x00\x00", "\x00\x00",
-  "\x41\x76", "\x6c\x61", "\x00\x00", "\x6c\x62", "\x49\x6b", "\x00\x00",
-  "\x00\x00", "\x35\x2f", "\x6c\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x5b",
-  "\x6c\x64", "\x3c\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3f\x76", "\x42\x2d", "\x6c\x67", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6c\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x65", "\x6c\x6d",
-  "\x6c\x6b", "\x00\x00", "\x00\x00", "\x6c\x68", "\x6c\x6a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x69", "\x6c\x6c", "\x00\x00", "\x35\x77",
-  "\x00\x00", "\x6c\x70", "\x00\x00", "\x40\x57", "\x00\x00", "\x6c\x71",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x59", "\x00\x00",
-  "\x6c\x6e", "\x6c\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x37", "\x00\x00", "\x41\x29",
-  "\x6c\x72", "\x00\x00", "\x00\x00", "\x6c\x75", "\x6c\x73", "\x6c\x74",
-  "\x4d\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x27",
-  "\x6c\x78", "\x6c\x76", "\x6c\x77", "\x6c\x79", "\x6d\x29", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x7c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x7d", "\x6c\x7b", "\x6c\x7a", "\x00\x00",
-  "\x44\x7d", "\x00\x00", "\x00\x00", "\x6d\x21", "\x6d\x25", "\x6d\x22",
-  "\x6c\x7e", "\x00\x00", "\x6d\x23", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x26", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x58", "\x6d\x28", "\x00\x00",
-  "\x00\x00", "\x6d\x2a", "\x6d\x27", "\x6d\x2d", "\x00\x00", "\x3d\x33",
-  "\x00\x00", "\x6d\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6d\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x2f", "\x00\x00", "\x00\x00", "\x6d\x32", "\x6d\x31", "\x00\x00",
-  "\x6d\x30", "\x00\x00", "\x00\x00", "\x6d\x34", "\x6d\x33", "\x00\x00",
-  "\x4c\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x36", "\x00\x00",
-  "\x6d\x35", "\x6d\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x38", "\x6d\x3a", "\x6d\x39", "\x3f\x48", "\x6d\x3b", "\x00\x00",
-  "\x00\x00", "\x36\x6d", "\x6d\x3c", "\x6d\x3e", "\x6d\x3f", "\x6d\x40",
-  "\x6d\x3d", "\x00\x00", "\x6d\x41", "\x00\x00", "\x3c\x56", "\x6d\x42",
-  "\x35\x30", "\x37\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x2e", "\x6d\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x70",
-  "\x00\x00", "\x00\x00", "\x45\x3e", "\x6d\x44", "\x6d\x47", "\x3c\x34",
-  "\x00\x00", "\x00\x00", "\x6d\x46", "\x6d\x45", "\x37\x5a", "\x6d\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x53", "\x00\x00",
-  "\x6d\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x5c", "\x6d\x49",
-  "\x00\x00", "\x6d\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6d\x4c", "\x6d\x4e", "\x4a\x65", "\x6d\x4b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6d\x4d", "\x00\x00", "\x6d\x51", "\x6d\x4f",
-  "\x35\x31", "\x00\x00", "\x6d\x50", "\x6d\x53", "\x00\x00", "\x00\x00",
-  "\x47\x5a", "\x4e\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x54", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x22", "\x6d\x56", "\x00\x00",
-  "\x6d\x55", "\x00\x00", "\x00\x00", "\x6d\x59", "\x4d\x41", "\x00\x00",
-  "\x00\x00", "\x6d\x58", "\x00\x00", "\x33\x6d", "\x6d\x57", "\x6d\x5c",
-  "\x00\x00", "\x00\x00", "\x6d\x5b", "\x00\x00", "\x00\x00", "\x6d\x5a",
-  "\x45\x32", "\x6d\x5d", "\x6d\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6d\x5f", "\x00\x00", "\x00\x00", "\x39\x6c", "\x00\x00",
-  "\x37\x25", "\x6d\x60", "\x6d\x61", "\x6d\x62", "\x3f\x49", "\x6d\x63",
-  "\x00\x00", "\x3c\x2d", "\x6d\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x21", "\x51\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x66", "\x65\x70",
-  "\x6d\x67", "\x43\x24", "\x3f\x2b", "\x47\x40", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6d\x68", "\x00\x00", "\x00\x00", "\x4a\x55",
-  "\x44\x54", "\x39\x7e", "\x00\x00", "\x00\x00", "\x43\x29", "\x00\x00",
-  "\x00\x00", "\x31\x2a", "\x00\x00", "\x4b\x78", "\x3f\x57", "\x37\x5e",
-  "\x00\x00", "\x00\x00", "\x36\x61", "\x00\x00", "\x00\x00", "\x4a\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x69",
-  "\x6d\x6b", "\x00\x00", "\x00\x00", "\x6d\x6a", "\x32\x60", "\x00\x00",
-  "\x00\x00", "\x46\x76", "\x6d\x6c", "\x47\x77", "\x00\x00", "\x45\x33",
-  "\x00\x00", "\x6d\x6d", "\x3d\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x6f", "\x00\x00", "\x00\x00", "\x4c\x42", "\x6d\x7e", "\x6d\x71",
-  "\x6d\x72", "\x00\x00", "\x00\x00", "\x44\x49", "\x00\x00", "\x00\x00",
-  "\x42\x60", "\x41\x77", "\x00\x00", "\x46\x28", "\x00\x00", "\x6d\x70",
-  "\x35\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x79",
-  "\x00\x00", "\x6d\x76", "\x6e\x25", "\x46\x29", "\x43\x60", "\x6d\x73",
-  "\x00\x00", "\x44\x7e", "\x45\x53", "\x6d\x74", "\x6d\x78", "\x3f\x60",
-  "\x00\x00", "\x47\x67", "\x44\x4c", "\x00\x00", "\x00\x00", "\x40\x42",
-  "\x6d\x77", "\x42\x2e", "\x42\x24", "\x6d\x75", "\x30\x29", "\x4f\x22",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x7a", "\x42\x61", "\x00\x00",
-  "\x00\x00", "\x3d\x35", "\x3f\x4a", "\x00\x00", "\x00\x00", "\x6d\x7c",
-  "\x6d\x7b", "\x00\x00", "\x30\x6f", "\x6d\x7d", "\x00\x00", "\x00\x00",
-  "\x49\x2f", "\x00\x00", "\x6e\x27", "\x00\x00", "\x00\x00", "\x46\x5b",
-  "\x3f\x6b", "\x00\x00", "\x00\x00", "\x43\x59", "\x00\x00", "\x36\x78",
-  "\x00\x00", "\x6e\x26", "\x4d\x37", "\x31\x3f", "\x00\x00", "\x4a\x57",
-  "\x32\x61", "\x6e\x21", "\x6e\x22", "\x6e\x23", "\x6e\x24", "\x46\x3b",
-  "\x43\x23", "\x30\x63", "\x6e\x28", "\x00\x00", "\x6e\x29", "\x74\x23",
-  "\x00\x00", "\x00\x00", "\x42\x3d", "\x00\x00", "\x6e\x2a", "\x00\x00",
-  "\x31\x73", "\x41\x4c", "\x00\x00", "\x38\x2f", "\x00\x00", "\x4d\x5a",
-  "\x00\x00", "\x00\x00", "\x6e\x2b", "\x45\x2c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x78", "\x3c\x57", "\x6e\x2c", "\x00\x00", "\x00\x00",
-  "\x6e\x2f", "\x00\x00", "\x00\x00", "\x3d\x65", "\x6e\x2d", "\x41\x2b",
-  "\x41\x2a", "\x00\x00", "\x30\x64", "\x00\x00", "\x4e\x4b", "\x6e\x31",
-  "\x00\x00", "\x48\x72", "\x6e\x33", "\x6e\x32", "\x6e\x30", "\x63\x64",
-  "\x34\x54", "\x00\x00", "\x00\x00", "\x6d\x6e", "\x00\x00", "\x6e\x35",
-  "\x6e\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x36",
-  "\x00\x00", "\x4d\x38", "\x46\x61", "\x00\x00", "\x00\x00", "\x4b\x2e",
-  "\x00\x00", "\x6e\x37", "\x00\x00", "\x3c\x59", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6e\x38", "\x00\x00", "\x6e\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6e\x3a", "\x00\x00", "\x00\x00", "\x45\x21",
-  "\x30\x6a", "\x39\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x3a",
-  "\x6e\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x34", "\x6e\x3b", "\x00\x00", "\x6e\x3c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x49\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x54", "\x4d\x39", "\x00\x00", "\x36\x3f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x54", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6e\x3f", "\x6e\x40", "\x6e\x41", "\x45\x22",
-  "\x00\x00", "\x00\x00", "\x6e\x43", "\x00\x00", "\x6e\x42", "\x46\x53",
-  "\x6e\x44", "\x3d\x36", "\x3c\x60", "\x47\x5b", "\x43\x71", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x72", "\x00\x00", "\x3f\x6c", "\x00\x00",
-  "\x6e\x45", "\x00\x00", "\x6e\x46", "\x3f\x5d", "\x6e\x47", "\x00\x00",
-  "\x6e\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x49", "\x4d\x6f",
-  "\x00\x00", "\x3d\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6e\x4b", "\x6e\x4a", "\x00\x00", "\x39\x5a", "\x00\x00",
-  "\x39\x73", "\x3b\x40", "\x6e\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3d\x66", "\x00\x00", "\x6e\x4d", "\x00\x00", "\x6e\x4c",
-  "\x00\x00", "\x42\x69", "\x00\x00", "\x00\x00", "\x38\x6f", "\x00\x00",
-  "\x40\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x4f", "\x00\x00",
-  "\x3e\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6e\x52", "\x6e\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x54", "\x6e\x53",
-  "\x00\x00", "\x00\x00", "\x3e\x7a", "\x00\x00", "\x6e\x55", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x56", "\x6e\x57",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x50", "\x3a\x53",
-  "\x3c\x61", "\x6e\x58", "\x00\x00", "\x6e\x59", "\x4e\x24", "\x3d\x45",
-  "\x4c\x6e", "\x4e\x4c", "\x6e\x5a", "\x36\x62", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6e\x5b", "\x00\x00", "\x45\x23", "\x00\x00",
-  "\x00\x00", "\x6e\x5e", "\x33\x78", "\x3f\x4b", "\x00\x00", "\x6e\x5c",
-  "\x00\x00", "\x6e\x5d", "\x00\x00", "\x44\x60", "\x00\x00", "\x00\x00",
-  "\x4b\x55", "\x36\x7c", "\x6e\x60", "\x6e\x61", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x5f", "\x00\x00", "\x00\x00",
-  "\x6e\x63", "\x46\x5f", "\x33\x43", "\x00\x00", "\x00\x00", "\x6e\x67",
-  "\x00\x00", "\x00\x00", "\x6e\x64", "\x6e\x66", "\x6e\x62", "\x6f\x4f",
-  "\x00\x00", "\x00\x00", "\x6e\x65", "\x4e\x6b", "\x00\x00", "\x00\x00",
-  "\x38\x5a", "\x6e\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x34", "\x6e\x6a", "\x00\x00", "\x00\x00", "\x6e\x6d", "\x6e\x6b",
-  "\x00\x00", "\x6e\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6e\x71", "\x6e\x69", "\x00\x00", "\x00\x00", "\x6e\x76", "\x31\x74",
-  "\x00\x00", "\x00\x00", "\x6e\x68", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x48\x2d", "\x00\x00", "\x6e\x6c", "\x00\x00", "\x3e\x60", "\x39\x5b",
-  "\x4b\x48", "\x00\x00", "\x36\x64", "\x00\x00", "\x00\x00", "\x3d\x46",
-  "\x00\x00", "\x46\x3c", "\x41\x2d", "\x00\x00", "\x6e\x74", "\x00\x00",
-  "\x6e\x6e", "\x6e\x73", "\x00\x00", "\x4c\x43", "\x00\x00", "\x44\x38",
-  "\x6e\x75", "\x6e\x72", "\x41\x2c", "\x6e\x79", "\x00\x00", "\x6e\x78",
-  "\x6e\x77", "\x00\x00", "\x00\x00", "\x4b\x2f", "\x3d\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6e\x7a", "\x4a\x5f", "\x00\x00",
-  "\x00\x00", "\x31\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x46", "\x43\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x78", "\x00\x00", "\x6e\x7c", "\x00\x00", "\x39\x5d", "\x3b\x2c",
-  "\x6e\x7b", "\x3f\x6d", "\x3f\x6e", "\x6f\x21", "\x6f\x23", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x7b", "\x00\x00",
-  "\x6f\x22", "\x6f\x24", "\x00\x00", "\x00\x00", "\x36\x53", "\x00\x00",
-  "\x49\x45", "\x00\x00", "\x00\x00", "\x3c\x62", "\x4f\x23", "\x00\x00",
-  "\x6e\x7e", "\x3a\x78", "\x00\x00", "\x00\x00", "\x4f\x3f", "\x00\x00",
-  "\x00\x00", "\x6f\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6f\x25", "\x6f\x27", "\x6e\x7d", "\x46\x69", "\x00\x00", "\x45\x55",
-  "\x44\x57", "\x00\x00", "\x6f\x2c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x43", "\x6f\x28", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6f\x29", "\x37\x2d", "\x00\x00", "\x6f\x2b", "\x38\x30", "\x6f\x2a",
-  "\x00\x00", "\x3e\x61", "\x33\x79", "\x6f\x30", "\x00\x00", "\x3a\x3f",
-  "\x41\x79", "\x00\x00", "\x00\x00", "\x44\x4a", "\x33\x3b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x2e", "\x6f\x2f", "\x44\x43",
-  "\x00\x00", "\x6f\x2d", "\x6f\x31", "\x6f\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6f\x3a", "\x6f\x39", "\x45\x2d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x32", "\x6f\x33", "\x6f\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x36\x40", "\x00\x00", "\x00\x00", "\x6f\x3b",
-  "\x6f\x35", "\x00\x00", "\x00\x00", "\x6f\x34", "\x6f\x3f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6f\x40", "\x6f\x41", "\x00\x00", "\x00\x00",
-  "\x6f\x3e", "\x6f\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x62",
-  "\x46\x2a", "\x6f\x3c", "\x6f\x45", "\x6f\x43", "\x6f\x44", "\x6f\x42",
-  "\x00\x00", "\x42\x78", "\x00\x00", "\x6f\x46", "\x6f\x47", "\x00\x00",
-  "\x00\x00", "\x6f\x49", "\x34\x55", "\x6f\x48", "\x4c\x7a", "\x6f\x54",
-  "\x6f\x4a", "\x00\x00", "\x00\x00", "\x6f\x4d", "\x00\x00", "\x6f\x4b",
-  "\x00\x00", "\x6f\x4c", "\x6f\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6f\x50", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6f\x51", "\x00\x00", "\x6f\x52", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6f\x55", "\x6f\x53", "\x6f\x56", "\x6f\x58",
-  "\x00\x00", "\x6f\x57", "\x44\x39", "\x4c\x67", "\x00\x00", "\x6f\x59",
-  "\x41\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x5a", "\x00\x00",
-  "\x4a\x44", "\x6f\x5b", "\x33\x2b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x3c", "\x00\x00", "\x34\x57", "\x00\x00", "\x34\x56", "\x6f\x5c",
-  "\x00\x00", "\x6f\x5d", "\x00\x00", "\x6f\x5e", "\x6f\x5f", "\x6f\x60",
-  "\x00\x00", "\x34\x58", "\x33\x55", "\x39\x5e", "\x48\x36", "\x00\x00",
-  "\x6f\x62", "\x6f\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6f\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x5c",
-  "\x6f\x66", "\x00\x00", "\x6f\x65", "\x6f\x64", "\x00\x00", "\x6f\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x6a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x30\x47", "\x00\x00", "\x00\x00", "\x6f\x68",
-  "\x00\x00", "\x6f\x6c", "\x6f\x6b", "\x6f\x6e", "\x6f\x6d", "\x6f\x6f",
-  "\x00\x00", "\x46\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x70",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x71", "\x6f\x73",
-  "\x00\x00", "\x00\x00", "\x6f\x72", "\x49\x6c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6f\x74", "\x6f\x75", "\x00\x00", "\x3a\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6f\x76", "\x6f\x77", "\x00\x00",
-  "\x00\x00", "\x4b\x49", "\x41\x4b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x30\x24", "\x42\x4b", "\x00\x00", "\x6f\x78", "\x00\x00", "\x49\x6d",
-  "\x6f\x7b", "\x6f\x79", "\x39\x5f", "\x00\x00", "\x6f\x7a", "\x38\x42",
-  "\x4a\x45", "\x6f\x7d", "\x70\x21", "\x6f\x7e", "\x70\x22", "\x00\x00",
-  "\x00\x00", "\x31\x21", "\x3f\x58", "\x3d\x7c", "\x34\x59", "\x70\x23",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x66", "\x00\x00", "\x70\x25",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x22", "\x00\x00", "\x70\x24",
-  "\x44\x44", "\x00\x00", "\x4e\x4d", "\x46\x2b", "\x6f\x7c", "\x4e\x26",
-  "\x00\x00", "\x38\x31", "\x00\x00", "\x00\x00", "\x4d\x5b", "\x36\x79",
-  "\x4e\x34", "\x00\x00", "\x37\x28", "\x00\x00", "\x42\x62", "\x67\x21",
-  "\x00\x00", "\x70\x26", "\x33\x2c", "\x3f\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x33\x56", "\x70\x28", "\x00\x00", "\x70\x29",
-  "\x70\x27", "\x37\x64", "\x00\x00", "\x3a\x5d", "\x3e\x63", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x23", "\x00\x00", "\x00\x00", "\x4e\x59",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x2b", "\x6e\x2e", "\x00\x00",
-  "\x70\x2a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x70\x2e", "\x70\x2c", "\x70\x2d", "\x00\x00", "\x70\x2f", "\x00\x00",
-  "\x70\x30", "\x4e\x6c", "\x70\x31", "\x70\x32", "\x00\x00", "\x40\x49",
-  "\x48\x3b", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x7d", "\x34\x67",
-  "\x00\x00", "\x00\x00", "\x4d\x3a", "\x32\x6d", "\x3d\x38", "\x38\x5b",
-  "\x00\x00", "\x70\x35", "\x00\x00", "\x70\x34", "\x3b\x73", "\x70\x36",
-  "\x70\x33", "\x00\x00", "\x00\x00", "\x3b\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x70\x3a", "\x6a\x2d", "\x00\x00", "\x00\x00", "\x52\x56",
-  "\x00\x00", "\x3f\x77", "\x70\x38", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x25", "\x46\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x2b", "\x00\x00", "\x40\x63", "\x3c\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x37", "\x00\x00",
-  "\x31\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x6d", "\x4d\x6b",
-  "\x00\x00", "\x70\x3b", "\x00\x00", "\x45\x45", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x7b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x70\x3c", "\x00\x00", "\x70\x3d", "\x3f\x4c", "\x70\x3e", "\x00\x00",
-  "\x4e\x6e", "\x00\x00", "\x00\x00", "\x70\x39", "\x70\x40", "\x70\x42",
-  "\x00\x00", "\x70\x41", "\x00\x00", "\x70\x3f", "\x00\x00", "\x00\x00",
-  "\x70\x43", "\x00\x00", "\x00\x00", "\x70\x44", "\x00\x00", "\x00\x00",
-  "\x41\x7a", "\x00\x00", "\x32\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x70\x45", "\x00\x00", "\x00\x00", "\x4c\x38",
-  "\x00\x00", "\x00\x00", "\x70\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x70\x47", "\x00\x00", "\x4f\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x31", "\x70\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x49", "\x70\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x70\x4e", "\x00\x00", "\x70\x4b", "\x00\x00",
-  "\x70\x4c", "\x00\x00", "\x70\x4d", "\x70\x4f", "\x40\x44", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4c\x77", "\x00\x00", "\x00\x00", "\x40\x45",
-  "\x00\x00", "\x00\x00", "\x70\x50", "\x00\x00", "\x48\x73", "\x00\x00",
-  "\x70\x51", "\x73\x53", "\x4c\x4c", "\x00\x00", "\x70\x52", "\x00\x00",
-  "\x70\x53", "\x00\x00", "\x70\x54", "\x33\x57", "\x00\x00", "\x70\x56",
-  "\x00\x00", "\x3f\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x57",
-  "\x00\x00", "\x00\x00", "\x37\x24", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x70\x58", "\x70\x5c", "\x00\x00", "\x70\x5a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x5b", "\x00\x00", "\x00\x00",
-  "\x33\x73", "\x70\x59", "\x70\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x70\x5e", "\x00\x00", "\x30\x48", "\x00\x00", "\x70\x5f",
-  "\x70\x60", "\x3e\x64", "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x61",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x47", "\x00\x00", "\x00\x00",
-  "\x70\x64", "\x00\x00", "\x00\x00", "\x70\x63", "\x00\x00", "\x70\x62",
-  "\x00\x00", "\x00\x00", "\x6b\x71", "\x00\x00", "\x4a\x5c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x65", "\x70\x66",
-  "\x70\x67", "\x00\x00", "\x00\x00", "\x70\x68", "\x00\x00", "\x70\x69",
-  "\x00\x00", "\x00\x00", "\x70\x6a", "\x34\x5a", "\x70\x6b", "\x70\x6c",
-  "\x47\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x6e", "\x32\x3b",
-  "\x00\x00", "\x70\x71", "\x70\x70", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x41",
-  "\x00\x00", "\x4a\x47", "\x44\x3a", "\x3a\x22", "\x00\x00", "\x39\x60",
-  "\x3d\x67", "\x00\x00", "\x3f\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x70\x73", "\x00\x00", "\x00\x00", "\x70\x72", "\x4d\x42", "\x34\x68",
-  "\x48\x52", "\x46\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x7c",
-  "\x4e\x4e", "\x00\x00", "\x37\x5b", "\x70\x76", "\x00\x00", "\x00\x00",
-  "\x70\x75", "\x4b\x4b", "\x46\x2c", "\x31\x50", "\x00\x00", "\x00\x00",
-  "\x70\x77", "\x70\x74", "\x00\x00", "\x00\x00", "\x49\x51", "\x4d\x6a",
-  "\x70\x78", "\x70\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x70\x7b", "\x42\x6a", "\x33\x5b", "\x33\x5c", "\x70\x7a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x69", "\x38\x32", "\x00\x00",
-  "\x00\x00", "\x34\x6a", "\x00\x00", "\x00\x00", "\x45\x3f", "\x00\x00",
-  "\x00\x00", "\x4e\x60", "\x38\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x70\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x70\x7d", "\x70\x7e",
-  "\x71\x21", "\x00\x00", "\x71\x23", "\x71\x22", "\x49\x77", "\x00\x00",
-  "\x71\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x25",
-  "\x00\x00", "\x71\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x71\x27", "\x71\x29", "\x71\x28", "\x00\x00", "\x71\x2a", "\x48\x74",
-  "\x66\x4c", "\x00\x00", "\x00\x00", "\x3f\x29", "\x00\x00", "\x00\x00",
-  "\x35\x32", "\x71\x2b", "\x00\x00", "\x71\x2c", "\x00\x00", "\x52\x2c",
-  "\x5d\x3b", "\x48\x53", "\x00\x00", "\x00\x00", "\x30\x7b", "\x00\x00",
-  "\x30\x3b", "\x3b\x74", "\x4b\x30", "\x3e\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x71\x2d", "\x00\x00", "\x4c\x5f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x71\x2e", "\x4d\x5c", "\x00\x00", "\x31\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x41", "\x00\x00", "\x71\x2f",
-  "\x32\x6e", "\x71\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x31",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x33", "\x71\x34",
-  "\x00\x00", "\x71\x36", "\x71\x32", "\x00\x00", "\x00\x00", "\x71\x35",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x5b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x71\x37", "\x00\x00", "\x71\x38", "\x71\x39", "\x71\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x3b", "\x00\x00", "\x00\x00",
-  "\x71\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x3c", "\x00\x00",
-  "\x71\x3f", "\x71\x42", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x3e",
-  "\x71\x40", "\x71\x41", "\x00\x00", "\x00\x00", "\x71\x43", "\x00\x00",
-  "\x36\x42", "\x3c\x73", "\x71\x44", "\x71\x45", "\x39\x61", "\x71\x46",
-  "\x00\x00", "\x00\x00", "\x33\x3e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x4f", "\x71\x47", "\x71\x48", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x5a", "\x46\x6b", "\x71\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x7d", "\x00\x00", "\x00\x00", "\x42\x4c",
-  "\x31\x58", "\x36\x6e", "\x00\x00", "\x36\x6f", "\x43\x73", "\x71\x4e",
-  "\x36\x70", "\x00\x00", "\x00\x00", "\x32\x6f", "\x00\x00", "\x00\x00",
-  "\x71\x4d", "\x00\x00", "\x00\x00", "\x71\x4b", "\x00\x00", "\x71\x4c",
-  "\x00\x00", "\x71\x4a", "\x00\x00", "\x00\x00", "\x71\x58", "\x71\x4f",
-  "\x71\x50", "\x00\x00", "\x00\x00", "\x71\x51", "\x71\x52", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x54", "\x00\x00",
-  "\x00\x00", "\x71\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x59",
-  "\x00\x00", "\x71\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x57",
-  "\x35\x33", "\x71\x56", "\x00\x00", "\x00\x00", "\x41\x7b", "\x38\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x59",
-  "\x42\x4d", "\x00\x00", "\x00\x00", "\x71\x5a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x2d", "\x71\x5b", "\x71\x60", "\x00\x00",
-  "\x71\x5e", "\x00\x00", "\x71\x5d", "\x71\x5f", "\x00\x00", "\x71\x5c",
-  "\x71\x62", "\x71\x61", "\x00\x00", "\x71\x64", "\x00\x00", "\x00\x00",
-  "\x36\x43", "\x71\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x65",
-  "\x00\x00", "\x00\x00", "\x71\x66", "\x00\x00", "\x71\x68", "\x71\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x69", "\x71\x6b", "\x71\x6a",
-  "\x39\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x6c",
-  "\x00\x00", "\x00\x00", "\x71\x6d", "\x33\x3c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x71\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x71\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x71", "\x71\x70", "\x00\x00",
-  "\x71\x71", "\x00\x00", "\x71\x72", "\x71\x73", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x71\x74", "\x71\x75", "\x00\x00", "\x00\x00", "\x71\x76",
-  "\x71\x77", "\x00\x00", "\x00\x00", "\x71\x78", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x48\x31", "\x71\x7a", "\x00\x00", "\x49\x26", "\x71\x7b",
-  "\x71\x79", "\x00\x00", "\x71\x7d", "\x00\x00", "\x00\x00", "\x71\x7c",
-  "\x00\x00", "\x00\x00", "\x71\x7e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x72\x21", "\x72\x22", "\x72\x23", "\x00\x00", "\x72\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x25", "\x00\x00", "\x00\x00",
-  "\x72\x26", "\x72\x27", "\x00\x00", "\x72\x28", "\x00\x00", "\x72\x29",
-  "\x72\x2a", "\x72\x2b", "\x72\x2c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x72\x2d", "\x72\x2e", "\x00\x00", "\x5d\x35", "\x72\x2f", "\x64\x78",
-  "\x35\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x21",
-  "\x3a\x32", "\x72\x31", "\x72\x30", "\x4c\x25", "\x72\x33", "\x72\x34",
-  "\x72\x32", "\x00\x00", "\x72\x35", "\x00\x00", "\x00\x00", "\x4b\x62",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x36", "\x00\x00", "\x35\x7b",
-  "\x4f\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x37",
-  "\x72\x39", "\x30\x3e", "\x00\x00", "\x00\x00", "\x72\x3a", "\x4a\x2b",
-  "\x72\x38", "\x00\x00", "\x00\x00", "\x72\x3b", "\x72\x3c", "\x72\x3d",
-  "\x72\x3e", "\x72\x3f", "\x00\x00", "\x4b\x6e", "\x3b\x2d", "\x00\x00",
-  "\x3a\x7a", "\x41\x2f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x72\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x72\x43", "\x72\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x72\x44", "\x00\x00", "\x00\x00", "\x38\x71", "\x72\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x45", "\x00\x00",
-  "\x72\x46", "\x72\x47", "\x00\x00", "\x72\x4b", "\x00\x00", "\x3b\x2a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x4c", "\x72\x49",
-  "\x72\x48", "\x72\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x5f",
-  "\x72\x50", "\x72\x4f", "\x72\x4e", "\x00\x00", "\x00\x00", "\x30\x33",
-  "\x72\x5a", "\x00\x00", "\x72\x56", "\x00\x00", "\x72\x57", "\x72\x53",
-  "\x72\x59", "\x00\x00", "\x72\x55", "\x33\x62", "\x00\x00", "\x00\x00",
-  "\x4f\x4c", "\x00\x00", "\x72\x58", "\x72\x54", "\x72\x52", "\x72\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x5c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x5f",
-  "\x00\x00", "\x00\x00", "\x72\x5e", "\x72\x5d", "\x49\x49", "\x72\x5b",
-  "\x30\x73", "\x72\x60", "\x00\x00", "\x72\x62", "\x33\x6f", "\x72\x4d",
-  "\x31\x37", "\x00\x00", "\x00\x00", "\x72\x64", "\x72\x63", "\x72\x61",
-  "\x43\x2d", "\x4b\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x5a", "\x00\x00", "\x00\x00", "\x72\x65", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x66", "\x72\x67", "\x72\x68",
-  "\x00\x00", "\x72\x69", "\x44\x3b", "\x00\x00", "\x72\x6a", "\x00\x00",
-  "\x48\x37", "\x00\x00", "\x72\x6f", "\x72\x6b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x72\x6c", "\x00\x00", "\x00\x00", "\x4b\x31", "\x4c\x44",
-  "\x00\x00", "\x46\x50", "\x72\x70", "\x00\x00", "\x00\x00", "\x72\x71",
-  "\x46\x3e", "\x72\x6e", "\x72\x6d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x2a", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x79",
-  "\x00\x00", "\x00\x00", "\x72\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x72\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x75", "\x00\x00",
-  "\x00\x00", "\x72\x73", "\x00\x00", "\x33\x7b", "\x00\x00", "\x72\x72",
-  "\x3c\x32", "\x32\x29", "\x39\x63", "\x00\x00", "\x00\x00", "\x72\x7c",
-  "\x72\x7b", "\x00\x00", "\x72\x7a", "\x00\x00", "\x00\x00", "\x72\x77",
-  "\x00\x00", "\x72\x7d", "\x00\x00", "\x72\x7e", "\x73\x25", "\x73\x24",
-  "\x73\x26", "\x00\x00", "\x00\x00", "\x31\x2d", "\x73\x21", "\x73\x22",
-  "\x00\x00", "\x39\x74", "\x4c\x39", "\x00\x00", "\x00\x00", "\x73\x23",
-  "\x4b\x32", "\x00\x00", "\x00\x00", "\x73\x2b", "\x00\x00", "\x00\x00",
-  "\x73\x27", "\x73\x2c", "\x73\x29", "\x00\x00", "\x73\x28", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x5c", "\x73\x2d",
-  "\x73\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x2f",
-  "\x00\x00", "\x73\x2a", "\x00\x00", "\x00\x00", "\x00\x00", "\x72\x74",
-  "\x00\x00", "\x00\x00", "\x73\x30", "\x00\x00", "\x44\x61", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x73\x34", "\x00\x00", "\x73\x35", "\x73\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x32",
-  "\x73\x38", "\x00\x00", "\x73\x31", "\x00\x00", "\x73\x36", "\x73\x37",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x3a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x39", "\x73\x3c", "\x73\x3d",
-  "\x00\x00", "\x73\x3e", "\x00\x00", "\x00\x00", "\x4f\x49", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x3b", "\x42\x6b",
-  "\x3a\x6d", "\x00\x00", "\x00\x00", "\x73\x3f", "\x73\x40", "\x73\x41",
-  "\x00\x00", "\x00\x00", "\x73\x42", "\x73\x43", "\x00\x00", "\x00\x00",
-  "\x38\x34", "\x73\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x45",
-  "\x00\x00", "\x3c\x2f", "\x00\x00", "\x73\x46", "\x73\x47", "\x00\x00",
-  "\x00\x00", "\x73\x48", "\x73\x49", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x73\x4c", "\x73\x4a", "\x4f\x3c", "\x00\x00", "\x73\x4b",
-  "\x00\x00", "\x4e\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x73\x4d", "\x00\x00", "\x4e\x5b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x4e", "\x47\x7e", "\x00\x00",
-  "\x00\x00", "\x73\x4f", "\x73\x51", "\x00\x00", "\x00\x00", "\x73\x52",
-  "\x73\x50", "\x39\x6d", "\x4c\x4d", "\x4b\x63", "\x56\x77", "\x00\x00",
-  "\x5d\x60", "\x4b\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x32\x2b", "\x73\x54", "\x35\x50", "\x73\x55", "\x73\x56", "\x73\x57",
-  "\x00\x00", "\x39\x75", "\x00\x00", "\x73\x58", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x54", "\x4c\x5b", "\x00\x00", "\x42\x63", "\x73\x59",
-  "\x73\x5b", "\x73\x5a", "\x00\x00", "\x73\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x73\x5d", "\x00\x00", "\x00\x00", "\x73\x5e",
-  "\x73\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x60",
-  "\x00\x00", "\x73\x61", "\x73\x62", "\x00\x00", "\x73\x63", "\x00\x00",
-  "\x73\x64", "\x73\x65", "\x73\x66", "\x73\x67", "\x73\x68", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x5d", "\x00\x00", "\x73\x6a",
-  "\x41\x4d", "\x73\x6b", "\x73\x6c", "\x49\x21", "\x00\x00", "\x00\x00",
-  "\x73\x6d", "\x73\x6e", "\x63\x37", "\x00\x00", "\x00\x00", "\x6c\x5a",
-  "\x70\x6d", "\x00\x00", "\x00\x00", "\x73\x6f", "\x00\x00", "\x73\x70",
-  "\x73\x72", "\x73\x73", "\x73\x74", "\x4e\x70", "\x73\x71", "\x00\x00",
-  "\x00\x00", "\x73\x75", "\x73\x76", "\x00\x00", "\x00\x00", "\x73\x78",
-  "\x00\x00", "\x73\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x73\x7a", "\x00\x00", "\x00\x00", "\x00\x00", "\x73\x7b",
-  "\x73\x79", "\x4e\x36", "\x73\x7c", "\x73\x7d", "\x63\x54", "\x00\x00",
-  "\x00\x00", "\x73\x7e", "\x21\x2a", "\x00\x00", "\x21\x74", "\x21\x70",
-  "\x21\x73", "\x21\x75", "\x00\x00", "\x21\x4a", "\x21\x4b", "\x21\x76",
-  "\x21\x5c", "\x21\x24", "\x00\x00", "\x21\x25", "\x21\x3f", "\x23\x30",
-  "\x23\x31", "\x23\x32", "\x23\x33", "\x23\x34", "\x23\x35", "\x23\x36",
-  "\x23\x37", "\x23\x38", "\x23\x39", "\x21\x27", "\x21\x28", "\x21\x63",
-  "\x21\x61", "\x21\x64", "\x21\x29", "\x21\x77", "\x23\x41", "\x23\x42",
-  "\x23\x43", "\x23\x44", "\x23\x45", "\x23\x46", "\x23\x47", "\x23\x48",
-  "\x23\x49", "\x23\x4a", "\x23\x4b", "\x23\x4c", "\x23\x4d", "\x23\x4e",
-  "\x23\x4f", "\x23\x50", "\x23\x51", "\x23\x52", "\x23\x53", "\x23\x54",
-  "\x23\x55", "\x23\x56", "\x23\x57", "\x23\x58", "\x23\x59", "\x23\x5a",
-  "\x21\x4e", "\x21\x40", "\x21\x4f", "\x21\x30", "\x21\x32", "\x21\x2e",
-  "\x23\x61", "\x23\x62", "\x23\x63", "\x23\x64", "\x23\x65", "\x23\x66",
-  "\x23\x67", "\x23\x68", "\x23\x69", "\x23\x6a", "\x23\x6b", "\x23\x6c",
-  "\x23\x6d", "\x23\x6e", "\x23\x6f", "\x23\x70", "\x23\x71", "\x23\x72",
-  "\x23\x73", "\x23\x74", "\x23\x75", "\x23\x76", "\x23\x77", "\x23\x78",
-  "\x23\x79", "\x23\x7a", "\x21\x50", "\x21\x43", "\x21\x51", "\x21\x31",
-  "\x00\x00", "\x21\x6f"
-};
diff --git a/newlib/iconvdata/jis0208.h b/newlib/iconvdata/jis0208.h
deleted file mode 100644
index ef6b891eb..000000000
--- a/newlib/iconvdata/jis0208.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* Access functions for JISX0208 conversion.
-   Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _JIS0208_H
-#define _JIS0208_H	1
-
-#include <gconv.h>
-#include <stdint.h>
-
-/* Conversion table.  */
-extern const uint16_t __jis0208_to_ucs[];
-
-extern const char __jisx0208_from_ucs4_lat1[256][2];
-extern const char __jisx0208_from_ucs4_greek[0xc1][2];
-extern const struct jisx0208_ucs_idx __jisx0208_from_ucs_idx[];
-extern const char __jisx0208_from_ucs_tab[][2];
-
-
-/* Struct for table with indeces in UCS mapping table.  */
-struct jisx0208_ucs_idx
-{
-  uint16_t start;
-  uint16_t end;
-  uint16_t idx;
-};
-
-
-static inline uint32_t
-jisx0208_to_ucs4 (const unsigned char **s, size_t avail, unsigned char offset)
-{
-  unsigned char ch = *(*s);
-  unsigned char ch2;
-  int idx;
-
-  if (ch < offset || (ch - offset) <= 0x20)
-    return __UNKNOWN_10646_CHAR;
-
-  if (avail < 2)
-    return 0;
-
-  ch2 = (*s)[1];
-  if (ch2 < offset || (ch2 - offset) <= 0x20 || (ch2 - offset) >= 0x7f)
-    return __UNKNOWN_10646_CHAR;
-
-  idx = (ch - 0x21 - offset) * 94 + (ch2 - 0x21 - offset);
-  if (idx >= 0x1e80)
-    return __UNKNOWN_10646_CHAR;
-
-  (*s) += 2;
-
-  return __jis0208_to_ucs[idx] ?: ((*s) -= 2, __UNKNOWN_10646_CHAR);
-}
-
-
-static inline size_t
-ucs4_to_jisx0208 (uint32_t wch, char *s, size_t avail)
-{
-  unsigned int ch = (unsigned int) wch;
-  const char *cp;
-
-  if (avail < 2)
-    return 0;
-
-  if (ch < 0x100)
-    cp = __jisx0208_from_ucs4_lat1[ch];
-  else if (ch >= 0x391 && ch <= 0x451)
-    cp = __jisx0208_from_ucs4_greek[ch - 0x391];
-  else
-    {
-      const struct jisx0208_ucs_idx *rp = __jisx0208_from_ucs_idx;
-
-      if (ch >= 0xffff)
-	return __UNKNOWN_10646_CHAR;
-      while (ch > rp->end)
-	++rp;
-      if (ch >= rp->start)
-	cp = __jisx0208_from_ucs_tab[rp->idx + ch - rp->start];
-      else
-	return __UNKNOWN_10646_CHAR;
-    }
-
-  if (cp[0] == '\0')
-    return __UNKNOWN_10646_CHAR;
-
-  s[0] = cp[0];
-  s[1] = cp[1];
-
-  return 2;
-}
-
-#endif /* jis0208.h */
diff --git a/newlib/iconvdata/jis0212.c b/newlib/iconvdata/jis0212.c
deleted file mode 100644
index 8ad1c9062..000000000
--- a/newlib/iconvdata/jis0212.c
+++ /dev/null
@@ -1,3940 +0,0 @@
-/* Mapping tables for JIS0212 handling.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdint.h>
-
-#include <jis0212.h>
-
-/* The defined JIS 0201 positions contains large gaps.  It's better to
-   avoid using one large table with such big gaps.  Instead we match each
-   char in a table resulting in an index to a table with the UCS.  The
-   following command can be used to generate the table:
-
-   egrep '^0x[[:xdigit:]][[:xdigit:]][[:xdigit:]][[:xdigit:]]' \
-     .../eastasia/jis/jis0212.txt | perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $first=$last=$idx=0;
-   while (<>) {
-     local($jis,$ucs,%rest) = split;
-     local($u)=hex($ucs);
-     local($j)=hex($jis);
-     local($k) = int(($j - 0x2121) / 256) * 94 + (($j - 0x2121) % 256);
-     if ($k - $last > 6) {
-       if ($last != 0) {
-	 printf (" { start: %#06x, end: %#06x, idx: %5d },\n",
-		 $first, $last, $idx);
-	 $idx += $last - $first + 1;
-       }
-       $first=$k;
-     }
-     $last=$k;
-   }
-   printf (" { start: %#06x, end: %#06x, idx: %5d }\n",
-	   $first, $last, $idx);
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const struct jisx0212_idx __jisx0212_to_ucs_idx[] =
-{
- { start: 0x006c, end: 0x0076, idx:     0 },
- { start: 0x007f, end: 0x0081, idx:    11 },
- { start: 0x00a8, end: 0x00ae, idx:    14 },
- { start: 0x0216, end: 0x0231, idx:    21 },
- { start: 0x0255, end: 0x0261, idx:    49 },
- { start: 0x0285, end: 0x0291, idx:    62 },
- { start: 0x02f0, end: 0x02ff, idx:    75 },
- { start: 0x0310, end: 0x031f, idx:    91 },
- { start: 0x034e, end: 0x03a4, idx:   107 },
- { start: 0x03ac, end: 0x0402, idx:   194 },
- { start: 0x0582, end: 0x1c2a, idx:   281 },
- { start: 0xffff, end: 0xffff, idx:     0 },
-};
-
-
-/* The table which the UCS values indexed by the table above can be
-   generated using the following code:
-
-   egrep '^0x[[:xdigit:]][[:xdigit:]][[:xdigit:]][[:xdigit:]]' \
-     .../eastasia/jis/jis0212.txt | perl tab.pl
-
-   where tab.pl is:
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $first=$last=$idx=0;
-
-   sub fmt {
-     printf ("\n ") if (($n % 8) == 0);
-     ++$n;
-     my($val) = pop(@_);
-     printf (" %#06x,", $val);
-   }
-
-   while (<>) {
-     local($jis,$ucs,%rest) = split;
-     local($u)=hex($ucs);
-     local($j)=hex($jis);
-     local($k) = int(($j - 0x2121) / 256) * 94 + (($j - 0x2121) % 256);
-     if ($k - $last > 6) {
-       if ($last != 0) {
-	 $idx += $last - $first + 1;
-       }
-       $first=$k;
-     } else {
-       for ($m = $last + 1; $m < $k; ++$m) {
-         fmt (0);
-       }
-     }
-     fmt ($u);
-     $last=$k;
-   }
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const uint16_t __jisx0212_to_ucs[] =
-{
-  0x02d8, 0x02c7, 0x00b8, 0x02d9, 0x02dd, 0x00af, 0x02db, 0x02da,
-  0xff5e, 0x0384, 0x0385, 0x00a1, 0x00a6, 0x00bf, 0x00ba, 0x00aa,
-  0x00a9, 0x00ae, 0x2122, 0x00a4, 0x2116, 0x0386, 0x0388, 0x0389,
-  0x038a, 0x03aa, 000000, 0x038c, 000000, 0x038e, 0x03ab, 000000,
-  0x038f, 000000, 000000, 000000, 000000, 0x03ac, 0x03ad, 0x03ae,
-  0x03af, 0x03ca, 0x0390, 0x03cc, 0x03c2, 0x03cd, 0x03cb, 0x03b0,
-  0x03ce, 0x0402, 0x0403, 0x0404, 0x0405, 0x0406, 0x0407, 0x0408,
-  0x0409, 0x040a, 0x040b, 0x040c, 0x040e, 0x040f, 0x0452, 0x0453,
-  0x0454, 0x0455, 0x0456, 0x0457, 0x0458, 0x0459, 0x045a, 0x045b,
-  0x045c, 0x045e, 0x045f, 0x00c6, 0x0110, 000000, 0x0126, 000000,
-  0x0132, 000000, 0x0141, 0x013f, 000000, 0x014a, 0x00d8, 0x0152,
-  000000, 0x0166, 0x00de, 0x00e6, 0x0111, 0x00f0, 0x0127, 0x0131,
-  0x0133, 0x0138, 0x0142, 0x0140, 0x0149, 0x014b, 0x00f8, 0x0153,
-  0x00df, 0x0167, 0x00fe, 0x00c1, 0x00c0, 0x00c4, 0x00c2, 0x0102,
-  0x01cd, 0x0100, 0x0104, 0x00c5, 0x00c3, 0x0106, 0x0108, 0x010c,
-  0x00c7, 0x010a, 0x010e, 0x00c9, 0x00c8, 0x00cb, 0x00ca, 0x011a,
-  0x0116, 0x0112, 0x0118, 000000, 0x011c, 0x011e, 0x0122, 0x0120,
-  0x0124, 0x00cd, 0x00cc, 0x00cf, 0x00ce, 0x01cf, 0x0130, 0x012a,
-  0x012e, 0x0128, 0x0134, 0x0136, 0x0139, 0x013d, 0x013b, 0x0143,
-  0x0147, 0x0145, 0x00d1, 0x00d3, 0x00d2, 0x00d6, 0x00d4, 0x01d1,
-  0x0150, 0x014c, 0x00d5, 0x0154, 0x0158, 0x0156, 0x015a, 0x015c,
-  0x0160, 0x015e, 0x0164, 0x0162, 0x00da, 0x00d9, 0x00dc, 0x00db,
-  0x016c, 0x01d3, 0x0170, 0x016a, 0x0172, 0x016e, 0x0168, 0x01d7,
-  0x01db, 0x01d9, 0x01d5, 0x0174, 0x00dd, 0x0178, 0x0176, 0x0179,
-  0x017d, 0x017b, 0x00e1, 0x00e0, 0x00e4, 0x00e2, 0x0103, 0x01ce,
-  0x0101, 0x0105, 0x00e5, 0x00e3, 0x0107, 0x0109, 0x010d, 0x00e7,
-  0x010b, 0x010f, 0x00e9, 0x00e8, 0x00eb, 0x00ea, 0x011b, 0x0117,
-  0x0113, 0x0119, 0x01f5, 0x011d, 0x011f, 000000, 0x0121, 0x0125,
-  0x00ed, 0x00ec, 0x00ef, 0x00ee, 0x01d0, 000000, 0x012b, 0x012f,
-  0x0129, 0x0135, 0x0137, 0x013a, 0x013e, 0x013c, 0x0144, 0x0148,
-  0x0146, 0x00f1, 0x00f3, 0x00f2, 0x00f6, 0x00f4, 0x01d2, 0x0151,
-  0x014d, 0x00f5, 0x0155, 0x0159, 0x0157, 0x015b, 0x015d, 0x0161,
-  0x015f, 0x0165, 0x0163, 0x00fa, 0x00f9, 0x00fc, 0x00fb, 0x016d,
-  0x01d4, 0x0171, 0x016b, 0x0173, 0x016f, 0x0169, 0x01d8, 0x01dc,
-  0x01da, 0x01d6, 0x0175, 0x00fd, 0x00ff, 0x0177, 0x017a, 0x017e,
-  0x017c, 0x4e02, 0x4e04, 0x4e05, 0x4e0c, 0x4e12, 0x4e1f, 0x4e23,
-  0x4e24, 0x4e28, 0x4e2b, 0x4e2e, 0x4e2f, 0x4e30, 0x4e35, 0x4e40,
-  0x4e41, 0x4e44, 0x4e47, 0x4e51, 0x4e5a, 0x4e5c, 0x4e63, 0x4e68,
-  0x4e69, 0x4e74, 0x4e75, 0x4e79, 0x4e7f, 0x4e8d, 0x4e96, 0x4e97,
-  0x4e9d, 0x4eaf, 0x4eb9, 0x4ec3, 0x4ed0, 0x4eda, 0x4edb, 0x4ee0,
-  0x4ee1, 0x4ee2, 0x4ee8, 0x4eef, 0x4ef1, 0x4ef3, 0x4ef5, 0x4efd,
-  0x4efe, 0x4eff, 0x4f00, 0x4f02, 0x4f03, 0x4f08, 0x4f0b, 0x4f0c,
-  0x4f12, 0x4f15, 0x4f16, 0x4f17, 0x4f19, 0x4f2e, 0x4f31, 0x4f60,
-  0x4f33, 0x4f35, 0x4f37, 0x4f39, 0x4f3b, 0x4f3e, 0x4f40, 0x4f42,
-  0x4f48, 0x4f49, 0x4f4b, 0x4f4c, 0x4f52, 0x4f54, 0x4f56, 0x4f58,
-  0x4f5f, 0x4f63, 0x4f6a, 0x4f6c, 0x4f6e, 0x4f71, 0x4f77, 0x4f78,
-  0x4f79, 0x4f7a, 0x4f7d, 0x4f7e, 0x4f81, 0x4f82, 0x4f84, 0x4f85,
-  0x4f89, 0x4f8a, 0x4f8c, 0x4f8e, 0x4f90, 0x4f92, 0x4f93, 0x4f94,
-  0x4f97, 0x4f99, 0x4f9a, 0x4f9e, 0x4f9f, 0x4fb2, 0x4fb7, 0x4fb9,
-  0x4fbb, 0x4fbc, 0x4fbd, 0x4fbe, 0x4fc0, 0x4fc1, 0x4fc5, 0x4fc6,
-  0x4fc8, 0x4fc9, 0x4fcb, 0x4fcc, 0x4fcd, 0x4fcf, 0x4fd2, 0x4fdc,
-  0x4fe0, 0x4fe2, 0x4ff0, 0x4ff2, 0x4ffc, 0x4ffd, 0x4fff, 0x5000,
-  0x5001, 0x5004, 0x5007, 0x500a, 0x500c, 0x500e, 0x5010, 0x5013,
-  0x5017, 0x5018, 0x501b, 0x501c, 0x501d, 0x501e, 0x5022, 0x5027,
-  0x502e, 0x5030, 0x5032, 0x5033, 0x5035, 0x5040, 0x5041, 0x5042,
-  0x5045, 0x5046, 0x504a, 0x504c, 0x504e, 0x5051, 0x5052, 0x5053,
-  0x5057, 0x5059, 0x505f, 0x5060, 0x5062, 0x5063, 0x5066, 0x5067,
-  0x506a, 0x506d, 0x5070, 0x5071, 0x503b, 0x5081, 0x5083, 0x5084,
-  0x5086, 0x508a, 0x508e, 0x508f, 0x5090, 0x5092, 0x5093, 0x5094,
-  0x5096, 0x509b, 0x509c, 0x509e, 0x509f, 0x50a0, 0x50a1, 0x50a2,
-  0x50aa, 0x50af, 0x50b0, 0x50b9, 0x50ba, 0x50bd, 0x50c0, 0x50c3,
-  0x50c4, 0x50c7, 0x50cc, 0x50ce, 0x50d0, 0x50d3, 0x50d4, 0x50d8,
-  0x50dc, 0x50dd, 0x50df, 0x50e2, 0x50e4, 0x50e6, 0x50e8, 0x50e9,
-  0x50ef, 0x50f1, 0x50f6, 0x50fa, 0x50fe, 0x5103, 0x5106, 0x5107,
-  0x5108, 0x510b, 0x510c, 0x510d, 0x510e, 0x50f2, 0x5110, 0x5117,
-  0x5119, 0x511b, 0x511c, 0x511d, 0x511e, 0x5123, 0x5127, 0x5128,
-  0x512c, 0x512d, 0x512f, 0x5131, 0x5133, 0x5134, 0x5135, 0x5138,
-  0x5139, 0x5142, 0x514a, 0x514f, 0x5153, 0x5155, 0x5157, 0x5158,
-  0x515f, 0x5164, 0x5166, 0x517e, 0x5183, 0x5184, 0x518b, 0x518e,
-  0x5198, 0x519d, 0x51a1, 0x51a3, 0x51ad, 0x51b8, 0x51ba, 0x51bc,
-  0x51be, 0x51bf, 0x51c2, 0x51c8, 0x51cf, 0x51d1, 0x51d2, 0x51d3,
-  0x51d5, 0x51d8, 0x51de, 0x51e2, 0x51e5, 0x51ee, 0x51f2, 0x51f3,
-  0x51f4, 0x51f7, 0x5201, 0x5202, 0x5205, 0x5212, 0x5213, 0x5215,
-  0x5216, 0x5218, 0x5222, 0x5228, 0x5231, 0x5232, 0x5235, 0x523c,
-  0x5245, 0x5249, 0x5255, 0x5257, 0x5258, 0x525a, 0x525c, 0x525f,
-  0x5260, 0x5261, 0x5266, 0x526e, 0x5277, 0x5278, 0x5279, 0x5280,
-  0x5282, 0x5285, 0x528a, 0x528c, 0x5293, 0x5295, 0x5296, 0x5297,
-  0x5298, 0x529a, 0x529c, 0x52a4, 0x52a5, 0x52a6, 0x52a7, 0x52af,
-  0x52b0, 0x52b6, 0x52b7, 0x52b8, 0x52ba, 0x52bb, 0x52bd, 0x52c0,
-  0x52c4, 0x52c6, 0x52c8, 0x52cc, 0x52cf, 0x52d1, 0x52d4, 0x52d6,
-  0x52db, 0x52dc, 0x52e1, 0x52e5, 0x52e8, 0x52e9, 0x52ea, 0x52ec,
-  0x52f0, 0x52f1, 0x52f4, 0x52f6, 0x52f7, 0x5300, 0x5303, 0x530a,
-  0x530b, 0x530c, 0x5311, 0x5313, 0x5318, 0x531b, 0x531c, 0x531e,
-  0x531f, 0x5325, 0x5327, 0x5328, 0x5329, 0x532b, 0x532c, 0x532d,
-  0x5330, 0x5332, 0x5335, 0x533c, 0x533d, 0x533e, 0x5342, 0x534c,
-  0x534b, 0x5359, 0x535b, 0x5361, 0x5363, 0x5365, 0x536c, 0x536d,
-  0x5372, 0x5379, 0x537e, 0x5383, 0x5387, 0x5388, 0x538e, 0x5393,
-  0x5394, 0x5399, 0x539d, 0x53a1, 0x53a4, 0x53aa, 0x53ab, 0x53af,
-  0x53b2, 0x53b4, 0x53b5, 0x53b7, 0x53b8, 0x53ba, 0x53bd, 0x53c0,
-  0x53c5, 0x53cf, 0x53d2, 0x53d3, 0x53d5, 0x53da, 0x53dd, 0x53de,
-  0x53e0, 0x53e6, 0x53e7, 0x53f5, 0x5402, 0x5413, 0x541a, 0x5421,
-  0x5427, 0x5428, 0x542a, 0x542f, 0x5431, 0x5434, 0x5435, 0x5443,
-  0x5444, 0x5447, 0x544d, 0x544f, 0x545e, 0x5462, 0x5464, 0x5466,
-  0x5467, 0x5469, 0x546b, 0x546d, 0x546e, 0x5474, 0x547f, 0x5481,
-  0x5483, 0x5485, 0x5488, 0x5489, 0x548d, 0x5491, 0x5495, 0x5496,
-  0x549c, 0x549f, 0x54a1, 0x54a6, 0x54a7, 0x54a9, 0x54aa, 0x54ad,
-  0x54ae, 0x54b1, 0x54b7, 0x54b9, 0x54ba, 0x54bb, 0x54bf, 0x54c6,
-  0x54ca, 0x54cd, 0x54ce, 0x54e0, 0x54ea, 0x54ec, 0x54ef, 0x54f6,
-  0x54fc, 0x54fe, 0x54ff, 0x5500, 0x5501, 0x5505, 0x5508, 0x5509,
-  0x550c, 0x550d, 0x550e, 0x5515, 0x552a, 0x552b, 0x5532, 0x5535,
-  0x5536, 0x553b, 0x553c, 0x553d, 0x5541, 0x5547, 0x5549, 0x554a,
-  0x554d, 0x5550, 0x5551, 0x5558, 0x555a, 0x555b, 0x555e, 0x5560,
-  0x5561, 0x5564, 0x5566, 0x557f, 0x5581, 0x5582, 0x5586, 0x5588,
-  0x558e, 0x558f, 0x5591, 0x5592, 0x5593, 0x5594, 0x5597, 0x55a3,
-  0x55a4, 0x55ad, 0x55b2, 0x55bf, 0x55c1, 0x55c3, 0x55c6, 0x55c9,
-  0x55cb, 0x55cc, 0x55ce, 0x55d1, 0x55d2, 0x55d3, 0x55d7, 0x55d8,
-  0x55db, 0x55de, 0x55e2, 0x55e9, 0x55f6, 0x55ff, 0x5605, 0x5608,
-  0x560a, 0x560d, 0x560e, 0x560f, 0x5610, 0x5611, 0x5612, 0x5619,
-  0x562c, 0x5630, 0x5633, 0x5635, 0x5637, 0x5639, 0x563b, 0x563c,
-  0x563d, 0x563f, 0x5640, 0x5641, 0x5643, 0x5644, 0x5646, 0x5649,
-  0x564b, 0x564d, 0x564f, 0x5654, 0x565e, 0x5660, 0x5661, 0x5662,
-  0x5663, 0x5666, 0x5669, 0x566d, 0x566f, 0x5671, 0x5672, 0x5675,
-  0x5684, 0x5685, 0x5688, 0x568b, 0x568c, 0x5695, 0x5699, 0x569a,
-  0x569d, 0x569e, 0x569f, 0x56a6, 0x56a7, 0x56a8, 0x56a9, 0x56ab,
-  0x56ac, 0x56ad, 0x56b1, 0x56b3, 0x56b7, 0x56be, 0x56c5, 0x56c9,
-  0x56ca, 0x56cb, 0x56cf, 0x56d0, 0x56cc, 0x56cd, 0x56d9, 0x56dc,
-  0x56dd, 0x56df, 0x56e1, 0x56e4, 0x56e5, 0x56e6, 0x56e7, 0x56e8,
-  0x56f1, 0x56eb, 0x56ed, 0x56f6, 0x56f7, 0x5701, 0x5702, 0x5707,
-  0x570a, 0x570c, 0x5711, 0x5715, 0x571a, 0x571b, 0x571d, 0x5720,
-  0x5722, 0x5723, 0x5724, 0x5725, 0x5729, 0x572a, 0x572c, 0x572e,
-  0x572f, 0x5733, 0x5734, 0x573d, 0x573e, 0x573f, 0x5745, 0x5746,
-  0x574c, 0x574d, 0x5752, 0x5762, 0x5765, 0x5767, 0x5768, 0x576b,
-  0x576d, 0x576e, 0x576f, 0x5770, 0x5771, 0x5773, 0x5774, 0x5775,
-  0x5777, 0x5779, 0x577a, 0x577b, 0x577c, 0x577e, 0x5781, 0x5783,
-  0x578c, 0x5794, 0x5797, 0x5799, 0x579a, 0x579c, 0x579d, 0x579e,
-  0x579f, 0x57a1, 0x5795, 0x57a7, 0x57a8, 0x57a9, 0x57ac, 0x57b8,
-  0x57bd, 0x57c7, 0x57c8, 0x57cc, 0x57cf, 0x57d5, 0x57dd, 0x57de,
-  0x57e4, 0x57e6, 0x57e7, 0x57e9, 0x57ed, 0x57f0, 0x57f5, 0x57f6,
-  0x57f8, 0x57fd, 0x57fe, 0x57ff, 0x5803, 0x5804, 0x5808, 0x5809,
-  0x57e1, 0x580c, 0x580d, 0x581b, 0x581e, 0x581f, 0x5820, 0x5826,
-  0x5827, 0x582d, 0x5832, 0x5839, 0x583f, 0x5849, 0x584c, 0x584d,
-  0x584f, 0x5850, 0x5855, 0x585f, 0x5861, 0x5864, 0x5867, 0x5868,
-  0x5878, 0x587c, 0x587f, 0x5880, 0x5881, 0x5887, 0x5888, 0x5889,
-  0x588a, 0x588c, 0x588d, 0x588f, 0x5890, 0x5894, 0x5896, 0x589d,
-  0x58a0, 0x58a1, 0x58a2, 0x58a6, 0x58a9, 0x58b1, 0x58b2, 0x58c4,
-  0x58bc, 0x58c2, 0x58c8, 0x58cd, 0x58ce, 0x58d0, 0x58d2, 0x58d4,
-  0x58d6, 0x58da, 0x58dd, 0x58e1, 0x58e2, 0x58e9, 0x58f3, 0x5905,
-  0x5906, 0x590b, 0x590c, 0x5912, 0x5913, 0x5914, 0x8641, 0x591d,
-  0x5921, 0x5923, 0x5924, 0x5928, 0x592f, 0x5930, 0x5933, 0x5935,
-  0x5936, 0x593f, 0x5943, 0x5946, 0x5952, 0x5953, 0x5959, 0x595b,
-  0x595d, 0x595e, 0x595f, 0x5961, 0x5963, 0x596b, 0x596d, 0x596f,
-  0x5972, 0x5975, 0x5976, 0x5979, 0x597b, 0x597c, 0x598b, 0x598c,
-  0x598e, 0x5992, 0x5995, 0x5997, 0x599f, 0x59a4, 0x59a7, 0x59ad,
-  0x59ae, 0x59af, 0x59b0, 0x59b3, 0x59b7, 0x59ba, 0x59bc, 0x59c1,
-  0x59c3, 0x59c4, 0x59c8, 0x59ca, 0x59cd, 0x59d2, 0x59dd, 0x59de,
-  0x59df, 0x59e3, 0x59e4, 0x59e7, 0x59ee, 0x59ef, 0x59f1, 0x59f2,
-  0x59f4, 0x59f7, 0x5a00, 0x5a04, 0x5a0c, 0x5a0d, 0x5a0e, 0x5a12,
-  0x5a13, 0x5a1e, 0x5a23, 0x5a24, 0x5a27, 0x5a28, 0x5a2a, 0x5a2d,
-  0x5a30, 0x5a44, 0x5a45, 0x5a47, 0x5a48, 0x5a4c, 0x5a50, 0x5a55,
-  0x5a5e, 0x5a63, 0x5a65, 0x5a67, 0x5a6d, 0x5a77, 0x5a7a, 0x5a7b,
-  0x5a7e, 0x5a8b, 0x5a90, 0x5a93, 0x5a96, 0x5a99, 0x5a9c, 0x5a9e,
-  0x5a9f, 0x5aa0, 0x5aa2, 0x5aa7, 0x5aac, 0x5ab1, 0x5ab2, 0x5ab3,
-  0x5ab5, 0x5ab8, 0x5aba, 0x5abb, 0x5abf, 0x5ac4, 0x5ac6, 0x5ac8,
-  0x5acf, 0x5ada, 0x5adc, 0x5ae0, 0x5ae5, 0x5aea, 0x5aee, 0x5af5,
-  0x5af6, 0x5afd, 0x5b00, 0x5b01, 0x5b08, 0x5b17, 0x5b34, 0x5b19,
-  0x5b1b, 0x5b1d, 0x5b21, 0x5b25, 0x5b2d, 0x5b38, 0x5b41, 0x5b4b,
-  0x5b4c, 0x5b52, 0x5b56, 0x5b5e, 0x5b68, 0x5b6e, 0x5b6f, 0x5b7c,
-  0x5b7d, 0x5b7e, 0x5b7f, 0x5b81, 0x5b84, 0x5b86, 0x5b8a, 0x5b8e,
-  0x5b90, 0x5b91, 0x5b93, 0x5b94, 0x5b96, 0x5ba8, 0x5ba9, 0x5bac,
-  0x5bad, 0x5baf, 0x5bb1, 0x5bb2, 0x5bb7, 0x5bba, 0x5bbc, 0x5bc0,
-  0x5bc1, 0x5bcd, 0x5bcf, 0x5bd6, 0x5bd7, 0x5bd8, 0x5bd9, 0x5bda,
-  0x5be0, 0x5bef, 0x5bf1, 0x5bf4, 0x5bfd, 0x5c0c, 0x5c17, 0x5c1e,
-  0x5c1f, 0x5c23, 0x5c26, 0x5c29, 0x5c2b, 0x5c2c, 0x5c2e, 0x5c30,
-  0x5c32, 0x5c35, 0x5c36, 0x5c59, 0x5c5a, 0x5c5c, 0x5c62, 0x5c63,
-  0x5c67, 0x5c68, 0x5c69, 0x5c6d, 0x5c70, 0x5c74, 0x5c75, 0x5c7a,
-  0x5c7b, 0x5c7c, 0x5c7d, 0x5c87, 0x5c88, 0x5c8a, 0x5c8f, 0x5c92,
-  0x5c9d, 0x5c9f, 0x5ca0, 0x5ca2, 0x5ca3, 0x5ca6, 0x5caa, 0x5cb2,
-  0x5cb4, 0x5cb5, 0x5cba, 0x5cc9, 0x5ccb, 0x5cd2, 0x5cdd, 0x5cd7,
-  0x5cee, 0x5cf1, 0x5cf2, 0x5cf4, 0x5d01, 0x5d06, 0x5d0d, 0x5d12,
-  0x5d2b, 0x5d23, 0x5d24, 0x5d26, 0x5d27, 0x5d31, 0x5d34, 0x5d39,
-  0x5d3d, 0x5d3f, 0x5d42, 0x5d43, 0x5d46, 0x5d48, 0x5d55, 0x5d51,
-  0x5d59, 0x5d4a, 0x5d5f, 0x5d60, 0x5d61, 0x5d62, 0x5d64, 0x5d6a,
-  0x5d6d, 0x5d70, 0x5d79, 0x5d7a, 0x5d7e, 0x5d7f, 0x5d81, 0x5d83,
-  0x5d88, 0x5d8a, 0x5d92, 0x5d93, 0x5d94, 0x5d95, 0x5d99, 0x5d9b,
-  0x5d9f, 0x5da0, 0x5da7, 0x5dab, 0x5db0, 0x5db4, 0x5db8, 0x5db9,
-  0x5dc3, 0x5dc7, 0x5dcb, 0x5dd0, 0x5dce, 0x5dd8, 0x5dd9, 0x5de0,
-  0x5de4, 0x5de9, 0x5df8, 0x5df9, 0x5e00, 0x5e07, 0x5e0d, 0x5e12,
-  0x5e14, 0x5e15, 0x5e18, 0x5e1f, 0x5e20, 0x5e2e, 0x5e28, 0x5e32,
-  0x5e35, 0x5e3e, 0x5e4b, 0x5e50, 0x5e49, 0x5e51, 0x5e56, 0x5e58,
-  0x5e5b, 0x5e5c, 0x5e5e, 0x5e68, 0x5e6a, 0x5e6b, 0x5e6c, 0x5e6d,
-  0x5e6e, 0x5e70, 0x5e80, 0x5e8b, 0x5e8e, 0x5ea2, 0x5ea4, 0x5ea5,
-  0x5ea8, 0x5eaa, 0x5eac, 0x5eb1, 0x5eb3, 0x5ebd, 0x5ebe, 0x5ebf,
-  0x5ec6, 0x5ecc, 0x5ecb, 0x5ece, 0x5ed1, 0x5ed2, 0x5ed4, 0x5ed5,
-  0x5edc, 0x5ede, 0x5ee5, 0x5eeb, 0x5f02, 0x5f06, 0x5f07, 0x5f08,
-  0x5f0e, 0x5f19, 0x5f1c, 0x5f1d, 0x5f21, 0x5f22, 0x5f23, 0x5f24,
-  0x5f28, 0x5f2b, 0x5f2c, 0x5f2e, 0x5f30, 0x5f34, 0x5f36, 0x5f3b,
-  0x5f3d, 0x5f3f, 0x5f40, 0x5f44, 0x5f45, 0x5f47, 0x5f4d, 0x5f50,
-  0x5f54, 0x5f58, 0x5f5b, 0x5f60, 0x5f63, 0x5f64, 0x5f67, 0x5f6f,
-  0x5f72, 0x5f74, 0x5f75, 0x5f78, 0x5f7a, 0x5f7d, 0x5f7e, 0x5f89,
-  0x5f8d, 0x5f8f, 0x5f96, 0x5f9c, 0x5f9d, 0x5fa2, 0x5fa7, 0x5fab,
-  0x5fa4, 0x5fac, 0x5faf, 0x5fb0, 0x5fb1, 0x5fb8, 0x5fc4, 0x5fc7,
-  0x5fc8, 0x5fc9, 0x5fcb, 0x5fd0, 0x5fd1, 0x5fd2, 0x5fd3, 0x5fd4,
-  0x5fde, 0x5fe1, 0x5fe2, 0x5fe8, 0x5fe9, 0x5fea, 0x5fec, 0x5fed,
-  0x5fee, 0x5fef, 0x5ff2, 0x5ff3, 0x5ff6, 0x5ffa, 0x5ffc, 0x6007,
-  0x600a, 0x600d, 0x6013, 0x6014, 0x6017, 0x6018, 0x601a, 0x601f,
-  0x6024, 0x602d, 0x6033, 0x6035, 0x6040, 0x6047, 0x6048, 0x6049,
-  0x604c, 0x6051, 0x6054, 0x6056, 0x6057, 0x605d, 0x6061, 0x6067,
-  0x6071, 0x607e, 0x607f, 0x6082, 0x6086, 0x6088, 0x608a, 0x608e,
-  0x6091, 0x6093, 0x6095, 0x6098, 0x609d, 0x609e, 0x60a2, 0x60a4,
-  0x60a5, 0x60a8, 0x60b0, 0x60b1, 0x60b7, 0x60bb, 0x60be, 0x60c2,
-  0x60c4, 0x60c8, 0x60c9, 0x60ca, 0x60cb, 0x60ce, 0x60cf, 0x60d4,
-  0x60d5, 0x60d9, 0x60db, 0x60dd, 0x60de, 0x60e2, 0x60e5, 0x60f2,
-  0x60f5, 0x60f8, 0x60fc, 0x60fd, 0x6102, 0x6107, 0x610a, 0x610c,
-  0x6110, 0x6111, 0x6112, 0x6113, 0x6114, 0x6116, 0x6117, 0x6119,
-  0x611c, 0x611e, 0x6122, 0x612a, 0x612b, 0x6130, 0x6131, 0x6135,
-  0x6136, 0x6137, 0x6139, 0x6141, 0x6145, 0x6146, 0x6149, 0x615e,
-  0x6160, 0x616c, 0x6172, 0x6178, 0x617b, 0x617c, 0x617f, 0x6180,
-  0x6181, 0x6183, 0x6184, 0x618b, 0x618d, 0x6192, 0x6193, 0x6197,
-  0x6198, 0x619c, 0x619d, 0x619f, 0x61a0, 0x61a5, 0x61a8, 0x61aa,
-  0x61ad, 0x61b8, 0x61b9, 0x61bc, 0x61c0, 0x61c1, 0x61c2, 0x61ce,
-  0x61cf, 0x61d5, 0x61dc, 0x61dd, 0x61de, 0x61df, 0x61e1, 0x61e2,
-  0x61e7, 0x61e9, 0x61e5, 0x61ec, 0x61ed, 0x61ef, 0x6201, 0x6203,
-  0x6204, 0x6207, 0x6213, 0x6215, 0x621c, 0x6220, 0x6222, 0x6223,
-  0x6227, 0x6229, 0x622b, 0x6239, 0x623d, 0x6242, 0x6243, 0x6244,
-  0x6246, 0x624c, 0x6250, 0x6251, 0x6252, 0x6254, 0x6256, 0x625a,
-  0x625c, 0x6264, 0x626d, 0x626f, 0x6273, 0x627a, 0x627d, 0x628d,
-  0x628e, 0x628f, 0x6290, 0x62a6, 0x62a8, 0x62b3, 0x62b6, 0x62b7,
-  0x62ba, 0x62be, 0x62bf, 0x62c4, 0x62ce, 0x62d5, 0x62d6, 0x62da,
-  0x62ea, 0x62f2, 0x62f4, 0x62fc, 0x62fd, 0x6303, 0x6304, 0x630a,
-  0x630b, 0x630d, 0x6310, 0x6313, 0x6316, 0x6318, 0x6329, 0x632a,
-  0x632d, 0x6335, 0x6336, 0x6339, 0x633c, 0x6341, 0x6342, 0x6343,
-  0x6344, 0x6346, 0x634a, 0x634b, 0x634e, 0x6352, 0x6353, 0x6354,
-  0x6358, 0x635b, 0x6365, 0x6366, 0x636c, 0x636d, 0x6371, 0x6374,
-  0x6375, 0x6378, 0x637c, 0x637d, 0x637f, 0x6382, 0x6384, 0x6387,
-  0x638a, 0x6390, 0x6394, 0x6395, 0x6399, 0x639a, 0x639e, 0x63a4,
-  0x63a6, 0x63ad, 0x63ae, 0x63af, 0x63bd, 0x63c1, 0x63c5, 0x63c8,
-  0x63ce, 0x63d1, 0x63d3, 0x63d4, 0x63d5, 0x63dc, 0x63e0, 0x63e5,
-  0x63ea, 0x63ec, 0x63f2, 0x63f3, 0x63f5, 0x63f8, 0x63f9, 0x6409,
-  0x640a, 0x6410, 0x6412, 0x6414, 0x6418, 0x641e, 0x6420, 0x6422,
-  0x6424, 0x6425, 0x6429, 0x642a, 0x642f, 0x6430, 0x6435, 0x643d,
-  0x643f, 0x644b, 0x644f, 0x6451, 0x6452, 0x6453, 0x6454, 0x645a,
-  0x645b, 0x645c, 0x645d, 0x645f, 0x6460, 0x6461, 0x6463, 0x646d,
-  0x6473, 0x6474, 0x647b, 0x647d, 0x6485, 0x6487, 0x648f, 0x6490,
-  0x6491, 0x6498, 0x6499, 0x649b, 0x649d, 0x649f, 0x64a1, 0x64a3,
-  0x64a6, 0x64a8, 0x64ac, 0x64b3, 0x64bd, 0x64be, 0x64bf, 0x64c4,
-  0x64c9, 0x64ca, 0x64cb, 0x64cc, 0x64ce, 0x64d0, 0x64d1, 0x64d5,
-  0x64d7, 0x64e4, 0x64e5, 0x64e9, 0x64ea, 0x64ed, 0x64f0, 0x64f5,
-  0x64f7, 0x64fb, 0x64ff, 0x6501, 0x6504, 0x6508, 0x6509, 0x650a,
-  0x650f, 0x6513, 0x6514, 0x6516, 0x6519, 0x651b, 0x651e, 0x651f,
-  0x6522, 0x6526, 0x6529, 0x652e, 0x6531, 0x653a, 0x653c, 0x653d,
-  0x6543, 0x6547, 0x6549, 0x6550, 0x6552, 0x6554, 0x655f, 0x6560,
-  0x6567, 0x656b, 0x657a, 0x657d, 0x6581, 0x6585, 0x658a, 0x6592,
-  0x6595, 0x6598, 0x659d, 0x65a0, 0x65a3, 0x65a6, 0x65ae, 0x65b2,
-  0x65b3, 0x65b4, 0x65bf, 0x65c2, 0x65c8, 0x65c9, 0x65ce, 0x65d0,
-  0x65d4, 0x65d6, 0x65d8, 0x65df, 0x65f0, 0x65f2, 0x65f4, 0x65f5,
-  0x65f9, 0x65fe, 0x65ff, 0x6600, 0x6604, 0x6608, 0x6609, 0x660d,
-  0x6611, 0x6612, 0x6615, 0x6616, 0x661d, 0x661e, 0x6621, 0x6622,
-  0x6623, 0x6624, 0x6626, 0x6629, 0x662a, 0x662b, 0x662c, 0x662e,
-  0x6630, 0x6631, 0x6633, 0x6639, 0x6637, 0x6640, 0x6645, 0x6646,
-  0x664a, 0x664c, 0x6651, 0x664e, 0x6657, 0x6658, 0x6659, 0x665b,
-  0x665c, 0x6660, 0x6661, 0x66fb, 0x666a, 0x666b, 0x666c, 0x667e,
-  0x6673, 0x6675, 0x667f, 0x6677, 0x6678, 0x6679, 0x667b, 0x6680,
-  0x667c, 0x668b, 0x668c, 0x668d, 0x6690, 0x6692, 0x6699, 0x669a,
-  0x669b, 0x669c, 0x669f, 0x66a0, 0x66a4, 0x66ad, 0x66b1, 0x66b2,
-  0x66b5, 0x66bb, 0x66bf, 0x66c0, 0x66c2, 0x66c3, 0x66c8, 0x66cc,
-  0x66ce, 0x66cf, 0x66d4, 0x66db, 0x66df, 0x66e8, 0x66eb, 0x66ec,
-  0x66ee, 0x66fa, 0x6705, 0x6707, 0x670e, 0x6713, 0x6719, 0x671c,
-  0x6720, 0x6722, 0x6733, 0x673e, 0x6745, 0x6747, 0x6748, 0x674c,
-  0x6754, 0x6755, 0x675d, 0x6766, 0x676c, 0x676e, 0x6774, 0x6776,
-  0x677b, 0x6781, 0x6784, 0x678e, 0x678f, 0x6791, 0x6793, 0x6796,
-  0x6798, 0x6799, 0x679b, 0x67b0, 0x67b1, 0x67b2, 0x67b5, 0x67bb,
-  0x67bc, 0x67bd, 0x67f9, 0x67c0, 0x67c2, 0x67c3, 0x67c5, 0x67c8,
-  0x67c9, 0x67d2, 0x67d7, 0x67d9, 0x67dc, 0x67e1, 0x67e6, 0x67f0,
-  0x67f2, 0x67f6, 0x67f7, 0x6852, 0x6814, 0x6819, 0x681d, 0x681f,
-  0x6828, 0x6827, 0x682c, 0x682d, 0x682f, 0x6830, 0x6831, 0x6833,
-  0x683b, 0x683f, 0x6844, 0x6845, 0x684a, 0x684c, 0x6855, 0x6857,
-  0x6858, 0x685b, 0x686b, 0x686e, 0x686f, 0x6870, 0x6871, 0x6872,
-  0x6875, 0x6879, 0x687a, 0x687b, 0x687c, 0x6882, 0x6884, 0x6886,
-  0x6888, 0x6896, 0x6898, 0x689a, 0x689c, 0x68a1, 0x68a3, 0x68a5,
-  0x68a9, 0x68aa, 0x68ae, 0x68b2, 0x68bb, 0x68c5, 0x68c8, 0x68cc,
-  0x68cf, 0x68d0, 0x68d1, 0x68d3, 0x68d6, 0x68d9, 0x68dc, 0x68dd,
-  0x68e5, 0x68e8, 0x68ea, 0x68eb, 0x68ec, 0x68ed, 0x68f0, 0x68f1,
-  0x68f5, 0x68f6, 0x68fb, 0x68fc, 0x68fd, 0x6906, 0x6909, 0x690a,
-  0x6910, 0x6911, 0x6913, 0x6916, 0x6917, 0x6931, 0x6933, 0x6935,
-  0x6938, 0x693b, 0x6942, 0x6945, 0x6949, 0x694e, 0x6957, 0x695b,
-  0x6963, 0x6964, 0x6965, 0x6966, 0x6968, 0x6969, 0x696c, 0x6970,
-  0x6971, 0x6972, 0x697a, 0x697b, 0x697f, 0x6980, 0x698d, 0x6992,
-  0x6996, 0x6998, 0x69a1, 0x69a5, 0x69a6, 0x69a8, 0x69ab, 0x69ad,
-  0x69af, 0x69b7, 0x69b8, 0x69ba, 0x69bc, 0x69c5, 0x69c8, 0x69d1,
-  0x69d6, 0x69d7, 0x69e2, 0x69e5, 0x69ee, 0x69ef, 0x69f1, 0x69f3,
-  0x69f5, 0x69fe, 0x6a00, 0x6a01, 0x6a03, 0x6a0f, 0x6a11, 0x6a15,
-  0x6a1a, 0x6a1d, 0x6a20, 0x6a24, 0x6a28, 0x6a30, 0x6a32, 0x6a34,
-  0x6a37, 0x6a3b, 0x6a3e, 0x6a3f, 0x6a45, 0x6a46, 0x6a49, 0x6a4a,
-  0x6a4e, 0x6a50, 0x6a51, 0x6a52, 0x6a55, 0x6a56, 0x6a5b, 0x6a64,
-  0x6a67, 0x6a6a, 0x6a71, 0x6a73, 0x6a7e, 0x6a81, 0x6a83, 0x6a86,
-  0x6a87, 0x6a89, 0x6a8b, 0x6a91, 0x6a9b, 0x6a9d, 0x6a9e, 0x6a9f,
-  0x6aa5, 0x6aab, 0x6aaf, 0x6ab0, 0x6ab1, 0x6ab4, 0x6abd, 0x6abe,
-  0x6abf, 0x6ac6, 0x6ac9, 0x6ac8, 0x6acc, 0x6ad0, 0x6ad4, 0x6ad5,
-  0x6ad6, 0x6adc, 0x6add, 0x6ae4, 0x6ae7, 0x6aec, 0x6af0, 0x6af1,
-  0x6af2, 0x6afc, 0x6afd, 0x6b02, 0x6b03, 0x6b06, 0x6b07, 0x6b09,
-  0x6b0f, 0x6b10, 0x6b11, 0x6b17, 0x6b1b, 0x6b1e, 0x6b24, 0x6b28,
-  0x6b2b, 0x6b2c, 0x6b2f, 0x6b35, 0x6b36, 0x6b3b, 0x6b3f, 0x6b46,
-  0x6b4a, 0x6b4d, 0x6b52, 0x6b56, 0x6b58, 0x6b5d, 0x6b60, 0x6b67,
-  0x6b6b, 0x6b6e, 0x6b70, 0x6b75, 0x6b7d, 0x6b7e, 0x6b82, 0x6b85,
-  0x6b97, 0x6b9b, 0x6b9f, 0x6ba0, 0x6ba2, 0x6ba3, 0x6ba8, 0x6ba9,
-  0x6bac, 0x6bad, 0x6bae, 0x6bb0, 0x6bb8, 0x6bb9, 0x6bbd, 0x6bbe,
-  0x6bc3, 0x6bc4, 0x6bc9, 0x6bcc, 0x6bd6, 0x6bda, 0x6be1, 0x6be3,
-  0x6be6, 0x6be7, 0x6bee, 0x6bf1, 0x6bf7, 0x6bf9, 0x6bff, 0x6c02,
-  0x6c04, 0x6c05, 0x6c09, 0x6c0d, 0x6c0e, 0x6c10, 0x6c12, 0x6c19,
-  0x6c1f, 0x6c26, 0x6c27, 0x6c28, 0x6c2c, 0x6c2e, 0x6c33, 0x6c35,
-  0x6c36, 0x6c3a, 0x6c3b, 0x6c3f, 0x6c4a, 0x6c4b, 0x6c4d, 0x6c4f,
-  0x6c52, 0x6c54, 0x6c59, 0x6c5b, 0x6c5c, 0x6c6b, 0x6c6d, 0x6c6f,
-  0x6c74, 0x6c76, 0x6c78, 0x6c79, 0x6c7b, 0x6c85, 0x6c86, 0x6c87,
-  0x6c89, 0x6c94, 0x6c95, 0x6c97, 0x6c98, 0x6c9c, 0x6c9f, 0x6cb0,
-  0x6cb2, 0x6cb4, 0x6cc2, 0x6cc6, 0x6ccd, 0x6ccf, 0x6cd0, 0x6cd1,
-  0x6cd2, 0x6cd4, 0x6cd6, 0x6cda, 0x6cdc, 0x6ce0, 0x6ce7, 0x6ce9,
-  0x6ceb, 0x6cec, 0x6cee, 0x6cf2, 0x6cf4, 0x6d04, 0x6d07, 0x6d0a,
-  0x6d0e, 0x6d0f, 0x6d11, 0x6d13, 0x6d1a, 0x6d26, 0x6d27, 0x6d28,
-  0x6c67, 0x6d2e, 0x6d2f, 0x6d31, 0x6d39, 0x6d3c, 0x6d3f, 0x6d57,
-  0x6d5e, 0x6d5f, 0x6d61, 0x6d65, 0x6d67, 0x6d6f, 0x6d70, 0x6d7c,
-  0x6d82, 0x6d87, 0x6d91, 0x6d92, 0x6d94, 0x6d96, 0x6d97, 0x6d98,
-  0x6daa, 0x6dac, 0x6db4, 0x6db7, 0x6db9, 0x6dbd, 0x6dbf, 0x6dc4,
-  0x6dc8, 0x6dca, 0x6dce, 0x6dcf, 0x6dd6, 0x6ddb, 0x6ddd, 0x6ddf,
-  0x6de0, 0x6de2, 0x6de5, 0x6de9, 0x6def, 0x6df0, 0x6df4, 0x6df6,
-  0x6dfc, 0x6e00, 0x6e04, 0x6e1e, 0x6e22, 0x6e27, 0x6e32, 0x6e36,
-  0x6e39, 0x6e3b, 0x6e3c, 0x6e44, 0x6e45, 0x6e48, 0x6e49, 0x6e4b,
-  0x6e4f, 0x6e51, 0x6e52, 0x6e53, 0x6e54, 0x6e57, 0x6e5c, 0x6e5d,
-  0x6e5e, 0x6e62, 0x6e63, 0x6e68, 0x6e73, 0x6e7b, 0x6e7d, 0x6e8d,
-  0x6e93, 0x6e99, 0x6ea0, 0x6ea7, 0x6ead, 0x6eae, 0x6eb1, 0x6eb3,
-  0x6ebb, 0x6ebf, 0x6ec0, 0x6ec1, 0x6ec3, 0x6ec7, 0x6ec8, 0x6eca,
-  0x6ecd, 0x6ece, 0x6ecf, 0x6eeb, 0x6eed, 0x6eee, 0x6ef9, 0x6efb,
-  0x6efd, 0x6f04, 0x6f08, 0x6f0a, 0x6f0c, 0x6f0d, 0x6f16, 0x6f18,
-  0x6f1a, 0x6f1b, 0x6f26, 0x6f29, 0x6f2a, 0x6f2f, 0x6f30, 0x6f33,
-  0x6f36, 0x6f3b, 0x6f3c, 0x6f2d, 0x6f4f, 0x6f51, 0x6f52, 0x6f53,
-  0x6f57, 0x6f59, 0x6f5a, 0x6f5d, 0x6f5e, 0x6f61, 0x6f62, 0x6f68,
-  0x6f6c, 0x6f7d, 0x6f7e, 0x6f83, 0x6f87, 0x6f88, 0x6f8b, 0x6f8c,
-  0x6f8d, 0x6f90, 0x6f92, 0x6f93, 0x6f94, 0x6f96, 0x6f9a, 0x6f9f,
-  0x6fa0, 0x6fa5, 0x6fa6, 0x6fa7, 0x6fa8, 0x6fae, 0x6faf, 0x6fb0,
-  0x6fb5, 0x6fb6, 0x6fbc, 0x6fc5, 0x6fc7, 0x6fc8, 0x6fca, 0x6fda,
-  0x6fde, 0x6fe8, 0x6fe9, 0x6ff0, 0x6ff5, 0x6ff9, 0x6ffc, 0x6ffd,
-  0x7000, 0x7005, 0x7006, 0x7007, 0x700d, 0x7017, 0x7020, 0x7023,
-  0x702f, 0x7034, 0x7037, 0x7039, 0x703c, 0x7043, 0x7044, 0x7048,
-  0x7049, 0x704a, 0x704b, 0x7054, 0x7055, 0x705d, 0x705e, 0x704e,
-  0x7064, 0x7065, 0x706c, 0x706e, 0x7075, 0x7076, 0x707e, 0x7081,
-  0x7085, 0x7086, 0x7094, 0x7095, 0x7096, 0x7097, 0x7098, 0x709b,
-  0x70a4, 0x70ab, 0x70b0, 0x70b1, 0x70b4, 0x70b7, 0x70ca, 0x70d1,
-  0x70d3, 0x70d4, 0x70d5, 0x70d6, 0x70d8, 0x70dc, 0x70e4, 0x70fa,
-  0x7103, 0x7104, 0x7105, 0x7106, 0x7107, 0x710b, 0x710c, 0x710f,
-  0x711e, 0x7120, 0x712b, 0x712d, 0x712f, 0x7130, 0x7131, 0x7138,
-  0x7141, 0x7145, 0x7146, 0x7147, 0x714a, 0x714b, 0x7150, 0x7152,
-  0x7157, 0x715a, 0x715c, 0x715e, 0x7160, 0x7168, 0x7179, 0x7180,
-  0x7185, 0x7187, 0x718c, 0x7192, 0x719a, 0x719b, 0x71a0, 0x71a2,
-  0x71af, 0x71b0, 0x71b2, 0x71b3, 0x71ba, 0x71bf, 0x71c0, 0x71c1,
-  0x71c4, 0x71cb, 0x71cc, 0x71d3, 0x71d6, 0x71d9, 0x71da, 0x71dc,
-  0x71f8, 0x71fe, 0x7200, 0x7207, 0x7208, 0x7209, 0x7213, 0x7217,
-  0x721a, 0x721d, 0x721f, 0x7224, 0x722b, 0x722f, 0x7234, 0x7238,
-  0x7239, 0x7241, 0x7242, 0x7243, 0x7245, 0x724e, 0x724f, 0x7250,
-  0x7253, 0x7255, 0x7256, 0x725a, 0x725c, 0x725e, 0x7260, 0x7263,
-  0x7268, 0x726b, 0x726e, 0x726f, 0x7271, 0x7277, 0x7278, 0x727b,
-  0x727c, 0x727f, 0x7284, 0x7289, 0x728d, 0x728e, 0x7293, 0x729b,
-  0x72a8, 0x72ad, 0x72ae, 0x72b1, 0x72b4, 0x72be, 0x72c1, 0x72c7,
-  0x72c9, 0x72cc, 0x72d5, 0x72d6, 0x72d8, 0x72df, 0x72e5, 0x72f3,
-  0x72f4, 0x72fa, 0x72fb, 0x72fe, 0x7302, 0x7304, 0x7305, 0x7307,
-  0x730b, 0x730d, 0x7312, 0x7313, 0x7318, 0x7319, 0x731e, 0x7322,
-  0x7324, 0x7327, 0x7328, 0x732c, 0x7331, 0x7332, 0x7335, 0x733a,
-  0x733b, 0x733d, 0x7343, 0x734d, 0x7350, 0x7352, 0x7356, 0x7358,
-  0x735d, 0x735e, 0x735f, 0x7360, 0x7366, 0x7367, 0x7369, 0x736b,
-  0x736c, 0x736e, 0x736f, 0x7371, 0x7377, 0x7379, 0x737c, 0x7380,
-  0x7381, 0x7383, 0x7385, 0x7386, 0x738e, 0x7390, 0x7393, 0x7395,
-  0x7397, 0x7398, 0x739c, 0x739e, 0x739f, 0x73a0, 0x73a2, 0x73a5,
-  0x73a6, 0x73aa, 0x73ab, 0x73ad, 0x73b5, 0x73b7, 0x73b9, 0x73bc,
-  0x73bd, 0x73bf, 0x73c5, 0x73c6, 0x73c9, 0x73cb, 0x73cc, 0x73cf,
-  0x73d2, 0x73d3, 0x73d6, 0x73d9, 0x73dd, 0x73e1, 0x73e3, 0x73e6,
-  0x73e7, 0x73e9, 0x73f4, 0x73f5, 0x73f7, 0x73f9, 0x73fa, 0x73fb,
-  0x73fd, 0x73ff, 0x7400, 0x7401, 0x7404, 0x7407, 0x740a, 0x7411,
-  0x741a, 0x741b, 0x7424, 0x7426, 0x7428, 0x7429, 0x742a, 0x742b,
-  0x742c, 0x742d, 0x742e, 0x742f, 0x7430, 0x7431, 0x7439, 0x7440,
-  0x7443, 0x7444, 0x7446, 0x7447, 0x744b, 0x744d, 0x7451, 0x7452,
-  0x7457, 0x745d, 0x7462, 0x7466, 0x7467, 0x7468, 0x746b, 0x746d,
-  0x746e, 0x7471, 0x7472, 0x7480, 0x7481, 0x7485, 0x7486, 0x7487,
-  0x7489, 0x748f, 0x7490, 0x7491, 0x7492, 0x7498, 0x7499, 0x749a,
-  0x749c, 0x749f, 0x74a0, 0x74a1, 0x74a3, 0x74a6, 0x74a8, 0x74a9,
-  0x74aa, 0x74ab, 0x74ae, 0x74af, 0x74b1, 0x74b2, 0x74b5, 0x74b9,
-  0x74bb, 0x74bf, 0x74c8, 0x74c9, 0x74cc, 0x74d0, 0x74d3, 0x74d8,
-  0x74da, 0x74db, 0x74de, 0x74df, 0x74e4, 0x74e8, 0x74ea, 0x74eb,
-  0x74ef, 0x74f4, 0x74fa, 0x74fb, 0x74fc, 0x74ff, 0x7506, 0x7512,
-  0x7516, 0x7517, 0x7520, 0x7521, 0x7524, 0x7527, 0x7529, 0x752a,
-  0x752f, 0x7536, 0x7539, 0x753d, 0x753e, 0x753f, 0x7540, 0x7543,
-  0x7547, 0x7548, 0x754e, 0x7550, 0x7552, 0x7557, 0x755e, 0x755f,
-  0x7561, 0x756f, 0x7571, 0x7579, 0x757a, 0x757b, 0x757c, 0x757d,
-  0x757e, 0x7581, 0x7585, 0x7590, 0x7592, 0x7593, 0x7595, 0x7599,
-  0x759c, 0x75a2, 0x75a4, 0x75b4, 0x75ba, 0x75bf, 0x75c0, 0x75c1,
-  0x75c4, 0x75c6, 0x75cc, 0x75ce, 0x75cf, 0x75d7, 0x75dc, 0x75df,
-  0x75e0, 0x75e1, 0x75e4, 0x75e7, 0x75ec, 0x75ee, 0x75ef, 0x75f1,
-  0x75f9, 0x7600, 0x7602, 0x7603, 0x7604, 0x7607, 0x7608, 0x760a,
-  0x760c, 0x760f, 0x7612, 0x7613, 0x7615, 0x7616, 0x7619, 0x761b,
-  0x761c, 0x761d, 0x761e, 0x7623, 0x7625, 0x7626, 0x7629, 0x762d,
-  0x7632, 0x7633, 0x7635, 0x7638, 0x7639, 0x763a, 0x763c, 0x764a,
-  0x7640, 0x7641, 0x7643, 0x7644, 0x7645, 0x7649, 0x764b, 0x7655,
-  0x7659, 0x765f, 0x7664, 0x7665, 0x766d, 0x766e, 0x766f, 0x7671,
-  0x7674, 0x7681, 0x7685, 0x768c, 0x768d, 0x7695, 0x769b, 0x769c,
-  0x769d, 0x769f, 0x76a0, 0x76a2, 0x76a3, 0x76a4, 0x76a5, 0x76a6,
-  0x76a7, 0x76a8, 0x76aa, 0x76ad, 0x76bd, 0x76c1, 0x76c5, 0x76c9,
-  0x76cb, 0x76cc, 0x76ce, 0x76d4, 0x76d9, 0x76e0, 0x76e6, 0x76e8,
-  0x76ec, 0x76f0, 0x76f1, 0x76f6, 0x76f9, 0x76fc, 0x7700, 0x7706,
-  0x770a, 0x770e, 0x7712, 0x7714, 0x7715, 0x7717, 0x7719, 0x771a,
-  0x771c, 0x7722, 0x7728, 0x772d, 0x772e, 0x772f, 0x7734, 0x7735,
-  0x7736, 0x7739, 0x773d, 0x773e, 0x7742, 0x7745, 0x7746, 0x774a,
-  0x774d, 0x774e, 0x774f, 0x7752, 0x7756, 0x7757, 0x775c, 0x775e,
-  0x775f, 0x7760, 0x7762, 0x7764, 0x7767, 0x776a, 0x776c, 0x7770,
-  0x7772, 0x7773, 0x7774, 0x777a, 0x777d, 0x7780, 0x7784, 0x778c,
-  0x778d, 0x7794, 0x7795, 0x7796, 0x779a, 0x779f, 0x77a2, 0x77a7,
-  0x77aa, 0x77ae, 0x77af, 0x77b1, 0x77b5, 0x77be, 0x77c3, 0x77c9,
-  0x77d1, 0x77d2, 0x77d5, 0x77d9, 0x77de, 0x77df, 0x77e0, 0x77e4,
-  0x77e6, 0x77ea, 0x77ec, 0x77f0, 0x77f1, 0x77f4, 0x77f8, 0x77fb,
-  0x7805, 0x7806, 0x7809, 0x780d, 0x780e, 0x7811, 0x781d, 0x7821,
-  0x7822, 0x7823, 0x782d, 0x782e, 0x7830, 0x7835, 0x7837, 0x7843,
-  0x7844, 0x7847, 0x7848, 0x784c, 0x784e, 0x7852, 0x785c, 0x785e,
-  0x7860, 0x7861, 0x7863, 0x7864, 0x7868, 0x786a, 0x786e, 0x787a,
-  0x787e, 0x788a, 0x788f, 0x7894, 0x7898, 0x78a1, 0x789d, 0x789e,
-  0x789f, 0x78a4, 0x78a8, 0x78ac, 0x78ad, 0x78b0, 0x78b1, 0x78b2,
-  0x78b3, 0x78bb, 0x78bd, 0x78bf, 0x78c7, 0x78c8, 0x78c9, 0x78cc,
-  0x78ce, 0x78d2, 0x78d3, 0x78d5, 0x78d6, 0x78e4, 0x78db, 0x78df,
-  0x78e0, 0x78e1, 0x78e6, 0x78ea, 0x78f2, 0x78f3, 0x7900, 0x78f6,
-  0x78f7, 0x78fa, 0x78fb, 0x78ff, 0x7906, 0x790c, 0x7910, 0x791a,
-  0x791c, 0x791e, 0x791f, 0x7920, 0x7925, 0x7927, 0x7929, 0x792d,
-  0x7931, 0x7934, 0x7935, 0x793b, 0x793d, 0x793f, 0x7944, 0x7945,
-  0x7946, 0x794a, 0x794b, 0x794f, 0x7951, 0x7954, 0x7958, 0x795b,
-  0x795c, 0x7967, 0x7969, 0x796b, 0x7972, 0x7979, 0x797b, 0x797c,
-  0x797e, 0x798b, 0x798c, 0x7991, 0x7993, 0x7994, 0x7995, 0x7996,
-  0x7998, 0x799b, 0x799c, 0x79a1, 0x79a8, 0x79a9, 0x79ab, 0x79af,
-  0x79b1, 0x79b4, 0x79b8, 0x79bb, 0x79c2, 0x79c4, 0x79c7, 0x79c8,
-  0x79ca, 0x79cf, 0x79d4, 0x79d6, 0x79da, 0x79dd, 0x79de, 0x79e0,
-  0x79e2, 0x79e5, 0x79ea, 0x79eb, 0x79ed, 0x79f1, 0x79f8, 0x79fc,
-  0x7a02, 0x7a03, 0x7a07, 0x7a09, 0x7a0a, 0x7a0c, 0x7a11, 0x7a15,
-  0x7a1b, 0x7a1e, 0x7a21, 0x7a27, 0x7a2b, 0x7a2d, 0x7a2f, 0x7a30,
-  0x7a34, 0x7a35, 0x7a38, 0x7a39, 0x7a3a, 0x7a44, 0x7a45, 0x7a47,
-  0x7a48, 0x7a4c, 0x7a55, 0x7a56, 0x7a59, 0x7a5c, 0x7a5d, 0x7a5f,
-  0x7a60, 0x7a65, 0x7a67, 0x7a6a, 0x7a6d, 0x7a75, 0x7a78, 0x7a7e,
-  0x7a80, 0x7a82, 0x7a85, 0x7a86, 0x7a8a, 0x7a8b, 0x7a90, 0x7a91,
-  0x7a94, 0x7a9e, 0x7aa0, 0x7aa3, 0x7aac, 0x7ab3, 0x7ab5, 0x7ab9,
-  0x7abb, 0x7abc, 0x7ac6, 0x7ac9, 0x7acc, 0x7ace, 0x7ad1, 0x7adb,
-  0x7ae8, 0x7ae9, 0x7aeb, 0x7aec, 0x7af1, 0x7af4, 0x7afb, 0x7afd,
-  0x7afe, 0x7b07, 0x7b14, 0x7b1f, 0x7b23, 0x7b27, 0x7b29, 0x7b2a,
-  0x7b2b, 0x7b2d, 0x7b2e, 0x7b2f, 0x7b30, 0x7b31, 0x7b34, 0x7b3d,
-  0x7b3f, 0x7b40, 0x7b41, 0x7b47, 0x7b4e, 0x7b55, 0x7b60, 0x7b64,
-  0x7b66, 0x7b69, 0x7b6a, 0x7b6d, 0x7b6f, 0x7b72, 0x7b73, 0x7b77,
-  0x7b84, 0x7b89, 0x7b8e, 0x7b90, 0x7b91, 0x7b96, 0x7b9b, 0x7b9e,
-  0x7ba0, 0x7ba5, 0x7bac, 0x7baf, 0x7bb0, 0x7bb2, 0x7bb5, 0x7bb6,
-  0x7bba, 0x7bbb, 0x7bbc, 0x7bbd, 0x7bc2, 0x7bc5, 0x7bc8, 0x7bca,
-  0x7bd4, 0x7bd6, 0x7bd7, 0x7bd9, 0x7bda, 0x7bdb, 0x7be8, 0x7bea,
-  0x7bf2, 0x7bf4, 0x7bf5, 0x7bf8, 0x7bf9, 0x7bfa, 0x7bfc, 0x7bfe,
-  0x7c01, 0x7c02, 0x7c03, 0x7c04, 0x7c06, 0x7c09, 0x7c0b, 0x7c0c,
-  0x7c0e, 0x7c0f, 0x7c19, 0x7c1b, 0x7c20, 0x7c25, 0x7c26, 0x7c28,
-  0x7c2c, 0x7c31, 0x7c33, 0x7c34, 0x7c36, 0x7c39, 0x7c3a, 0x7c46,
-  0x7c4a, 0x7c55, 0x7c51, 0x7c52, 0x7c53, 0x7c59, 0x7c5a, 0x7c5b,
-  0x7c5c, 0x7c5d, 0x7c5e, 0x7c61, 0x7c63, 0x7c67, 0x7c69, 0x7c6d,
-  0x7c6e, 0x7c70, 0x7c72, 0x7c79, 0x7c7c, 0x7c7d, 0x7c86, 0x7c87,
-  0x7c8f, 0x7c94, 0x7c9e, 0x7ca0, 0x7ca6, 0x7cb0, 0x7cb6, 0x7cb7,
-  0x7cba, 0x7cbb, 0x7cbc, 0x7cbf, 0x7cc4, 0x7cc7, 0x7cc8, 0x7cc9,
-  0x7ccd, 0x7ccf, 0x7cd3, 0x7cd4, 0x7cd5, 0x7cd7, 0x7cd9, 0x7cda,
-  0x7cdd, 0x7ce6, 0x7ce9, 0x7ceb, 0x7cf5, 0x7d03, 0x7d07, 0x7d08,
-  0x7d09, 0x7d0f, 0x7d11, 0x7d12, 0x7d13, 0x7d16, 0x7d1d, 0x7d1e,
-  0x7d23, 0x7d26, 0x7d2a, 0x7d2d, 0x7d31, 0x7d3c, 0x7d3d, 0x7d3e,
-  0x7d40, 0x7d41, 0x7d47, 0x7d48, 0x7d4d, 0x7d51, 0x7d53, 0x7d57,
-  0x7d59, 0x7d5a, 0x7d5c, 0x7d5d, 0x7d65, 0x7d67, 0x7d6a, 0x7d70,
-  0x7d78, 0x7d7a, 0x7d7b, 0x7d7f, 0x7d81, 0x7d82, 0x7d83, 0x7d85,
-  0x7d86, 0x7d88, 0x7d8b, 0x7d8c, 0x7d8d, 0x7d91, 0x7d96, 0x7d97,
-  0x7d9d, 0x7d9e, 0x7da6, 0x7da7, 0x7daa, 0x7db3, 0x7db6, 0x7db7,
-  0x7db9, 0x7dc2, 0x7dc3, 0x7dc4, 0x7dc5, 0x7dc6, 0x7dcc, 0x7dcd,
-  0x7dce, 0x7dd7, 0x7dd9, 0x7e00, 0x7de2, 0x7de5, 0x7de6, 0x7dea,
-  0x7deb, 0x7ded, 0x7df1, 0x7df5, 0x7df6, 0x7df9, 0x7dfa, 0x7e08,
-  0x7e10, 0x7e11, 0x7e15, 0x7e17, 0x7e1c, 0x7e1d, 0x7e20, 0x7e27,
-  0x7e28, 0x7e2c, 0x7e2d, 0x7e2f, 0x7e33, 0x7e36, 0x7e3f, 0x7e44,
-  0x7e45, 0x7e47, 0x7e4e, 0x7e50, 0x7e52, 0x7e58, 0x7e5f, 0x7e61,
-  0x7e62, 0x7e65, 0x7e6b, 0x7e6e, 0x7e6f, 0x7e73, 0x7e78, 0x7e7e,
-  0x7e81, 0x7e86, 0x7e87, 0x7e8a, 0x7e8d, 0x7e91, 0x7e95, 0x7e98,
-  0x7e9a, 0x7e9d, 0x7e9e, 0x7f3c, 0x7f3b, 0x7f3d, 0x7f3e, 0x7f3f,
-  0x7f43, 0x7f44, 0x7f47, 0x7f4f, 0x7f52, 0x7f53, 0x7f5b, 0x7f5c,
-  0x7f5d, 0x7f61, 0x7f63, 0x7f64, 0x7f65, 0x7f66, 0x7f6d, 0x7f71,
-  0x7f7d, 0x7f7e, 0x7f7f, 0x7f80, 0x7f8b, 0x7f8d, 0x7f8f, 0x7f90,
-  0x7f91, 0x7f96, 0x7f97, 0x7f9c, 0x7fa1, 0x7fa2, 0x7fa6, 0x7faa,
-  0x7fad, 0x7fb4, 0x7fbc, 0x7fbf, 0x7fc0, 0x7fc3, 0x7fc8, 0x7fce,
-  0x7fcf, 0x7fdb, 0x7fdf, 0x7fe3, 0x7fe5, 0x7fe8, 0x7fec, 0x7fee,
-  0x7fef, 0x7ff2, 0x7ffa, 0x7ffd, 0x7ffe, 0x7fff, 0x8007, 0x8008,
-  0x800a, 0x800d, 0x800e, 0x800f, 0x8011, 0x8013, 0x8014, 0x8016,
-  0x801d, 0x801e, 0x801f, 0x8020, 0x8024, 0x8026, 0x802c, 0x802e,
-  0x8030, 0x8034, 0x8035, 0x8037, 0x8039, 0x803a, 0x803c, 0x803e,
-  0x8040, 0x8044, 0x8060, 0x8064, 0x8066, 0x806d, 0x8071, 0x8075,
-  0x8081, 0x8088, 0x808e, 0x809c, 0x809e, 0x80a6, 0x80a7, 0x80ab,
-  0x80b8, 0x80b9, 0x80c8, 0x80cd, 0x80cf, 0x80d2, 0x80d4, 0x80d5,
-  0x80d7, 0x80d8, 0x80e0, 0x80ed, 0x80ee, 0x80f0, 0x80f2, 0x80f3,
-  0x80f6, 0x80f9, 0x80fa, 0x80fe, 0x8103, 0x810b, 0x8116, 0x8117,
-  0x8118, 0x811c, 0x811e, 0x8120, 0x8124, 0x8127, 0x812c, 0x8130,
-  0x8135, 0x813a, 0x813c, 0x8145, 0x8147, 0x814a, 0x814c, 0x8152,
-  0x8157, 0x8160, 0x8161, 0x8167, 0x8168, 0x8169, 0x816d, 0x816f,
-  0x8177, 0x8181, 0x8190, 0x8184, 0x8185, 0x8186, 0x818b, 0x818e,
-  0x8196, 0x8198, 0x819b, 0x819e, 0x81a2, 0x81ae, 0x81b2, 0x81b4,
-  0x81bb, 0x81cb, 0x81c3, 0x81c5, 0x81ca, 0x81ce, 0x81cf, 0x81d5,
-  0x81d7, 0x81db, 0x81dd, 0x81de, 0x81e1, 0x81e4, 0x81eb, 0x81ec,
-  0x81f0, 0x81f1, 0x81f2, 0x81f5, 0x81f6, 0x81f8, 0x81f9, 0x81fd,
-  0x81ff, 0x8200, 0x8203, 0x820f, 0x8213, 0x8214, 0x8219, 0x821a,
-  0x821d, 0x8221, 0x8222, 0x8228, 0x8232, 0x8234, 0x823a, 0x8243,
-  0x8244, 0x8245, 0x8246, 0x824b, 0x824e, 0x824f, 0x8251, 0x8256,
-  0x825c, 0x8260, 0x8263, 0x8267, 0x826d, 0x8274, 0x827b, 0x827d,
-  0x827f, 0x8280, 0x8281, 0x8283, 0x8284, 0x8287, 0x8289, 0x828a,
-  0x828e, 0x8291, 0x8294, 0x8296, 0x8298, 0x829a, 0x829b, 0x82a0,
-  0x82a1, 0x82a3, 0x82a4, 0x82a7, 0x82a8, 0x82a9, 0x82aa, 0x82ae,
-  0x82b0, 0x82b2, 0x82b4, 0x82b7, 0x82ba, 0x82bc, 0x82be, 0x82bf,
-  0x82c6, 0x82d0, 0x82d5, 0x82da, 0x82e0, 0x82e2, 0x82e4, 0x82e8,
-  0x82ea, 0x82ed, 0x82ef, 0x82f6, 0x82f7, 0x82fd, 0x82fe, 0x8300,
-  0x8301, 0x8307, 0x8308, 0x830a, 0x830b, 0x8354, 0x831b, 0x831d,
-  0x831e, 0x831f, 0x8321, 0x8322, 0x832c, 0x832d, 0x832e, 0x8330,
-  0x8333, 0x8337, 0x833a, 0x833c, 0x833d, 0x8342, 0x8343, 0x8344,
-  0x8347, 0x834d, 0x834e, 0x8351, 0x8355, 0x8356, 0x8357, 0x8370,
-  0x8378, 0x837d, 0x837f, 0x8380, 0x8382, 0x8384, 0x8386, 0x838d,
-  0x8392, 0x8394, 0x8395, 0x8398, 0x8399, 0x839b, 0x839c, 0x839d,
-  0x83a6, 0x83a7, 0x83a9, 0x83ac, 0x83be, 0x83bf, 0x83c0, 0x83c7,
-  0x83c9, 0x83cf, 0x83d0, 0x83d1, 0x83d4, 0x83dd, 0x8353, 0x83e8,
-  0x83ea, 0x83f6, 0x83f8, 0x83f9, 0x83fc, 0x8401, 0x8406, 0x840a,
-  0x840f, 0x8411, 0x8415, 0x8419, 0x83ad, 0x842f, 0x8439, 0x8445,
-  0x8447, 0x8448, 0x844a, 0x844d, 0x844f, 0x8451, 0x8452, 0x8456,
-  0x8458, 0x8459, 0x845a, 0x845c, 0x8460, 0x8464, 0x8465, 0x8467,
-  0x846a, 0x8470, 0x8473, 0x8474, 0x8476, 0x8478, 0x847c, 0x847d,
-  0x8481, 0x8485, 0x8492, 0x8493, 0x8495, 0x849e, 0x84a6, 0x84a8,
-  0x84a9, 0x84aa, 0x84af, 0x84b1, 0x84b4, 0x84ba, 0x84bd, 0x84be,
-  0x84c0, 0x84c2, 0x84c7, 0x84c8, 0x84cc, 0x84cf, 0x84d3, 0x84dc,
-  0x84e7, 0x84ea, 0x84ef, 0x84f0, 0x84f1, 0x84f2, 0x84f7, 0x8532,
-  0x84fa, 0x84fb, 0x84fd, 0x8502, 0x8503, 0x8507, 0x850c, 0x850e,
-  0x8510, 0x851c, 0x851e, 0x8522, 0x8523, 0x8524, 0x8525, 0x8527,
-  0x852a, 0x852b, 0x852f, 0x8533, 0x8534, 0x8536, 0x853f, 0x8546,
-  0x854f, 0x8550, 0x8551, 0x8552, 0x8553, 0x8556, 0x8559, 0x855c,
-  0x855d, 0x855e, 0x855f, 0x8560, 0x8561, 0x8562, 0x8564, 0x856b,
-  0x856f, 0x8579, 0x857a, 0x857b, 0x857d, 0x857f, 0x8581, 0x8585,
-  0x8586, 0x8589, 0x858b, 0x858c, 0x858f, 0x8593, 0x8598, 0x859d,
-  0x859f, 0x85a0, 0x85a2, 0x85a5, 0x85a7, 0x85b4, 0x85b6, 0x85b7,
-  0x85b8, 0x85bc, 0x85bd, 0x85be, 0x85bf, 0x85c2, 0x85c7, 0x85ca,
-  0x85cb, 0x85ce, 0x85ad, 0x85d8, 0x85da, 0x85df, 0x85e0, 0x85e6,
-  0x85e8, 0x85ed, 0x85f3, 0x85f6, 0x85fc, 0x85ff, 0x8600, 0x8604,
-  0x8605, 0x860d, 0x860e, 0x8610, 0x8611, 0x8612, 0x8618, 0x8619,
-  0x861b, 0x861e, 0x8621, 0x8627, 0x8629, 0x8636, 0x8638, 0x863a,
-  0x863c, 0x863d, 0x8640, 0x8642, 0x8646, 0x8652, 0x8653, 0x8656,
-  0x8657, 0x8658, 0x8659, 0x865d, 0x8660, 0x8661, 0x8662, 0x8663,
-  0x8664, 0x8669, 0x866c, 0x866f, 0x8675, 0x8676, 0x8677, 0x867a,
-  0x868d, 0x8691, 0x8696, 0x8698, 0x869a, 0x869c, 0x86a1, 0x86a6,
-  0x86a7, 0x86a8, 0x86ad, 0x86b1, 0x86b3, 0x86b4, 0x86b5, 0x86b7,
-  0x86b8, 0x86b9, 0x86bf, 0x86c0, 0x86c1, 0x86c3, 0x86c5, 0x86d1,
-  0x86d2, 0x86d5, 0x86d7, 0x86da, 0x86dc, 0x86e0, 0x86e3, 0x86e5,
-  0x86e7, 0x8688, 0x86fa, 0x86fc, 0x86fd, 0x8704, 0x8705, 0x8707,
-  0x870b, 0x870e, 0x870f, 0x8710, 0x8713, 0x8714, 0x8719, 0x871e,
-  0x871f, 0x8721, 0x8723, 0x8728, 0x872e, 0x872f, 0x8731, 0x8732,
-  0x8739, 0x873a, 0x873c, 0x873d, 0x873e, 0x8740, 0x8743, 0x8745,
-  0x874d, 0x8758, 0x875d, 0x8761, 0x8764, 0x8765, 0x876f, 0x8771,
-  0x8772, 0x877b, 0x8783, 0x8784, 0x8785, 0x8786, 0x8787, 0x8788,
-  0x8789, 0x878b, 0x878c, 0x8790, 0x8793, 0x8795, 0x8797, 0x8798,
-  0x8799, 0x879e, 0x87a0, 0x87a3, 0x87a7, 0x87ac, 0x87ad, 0x87ae,
-  0x87b1, 0x87b5, 0x87be, 0x87bf, 0x87c1, 0x87c8, 0x87c9, 0x87ca,
-  0x87ce, 0x87d5, 0x87d6, 0x87d9, 0x87da, 0x87dc, 0x87df, 0x87e2,
-  0x87e3, 0x87e4, 0x87ea, 0x87eb, 0x87ed, 0x87f1, 0x87f3, 0x87f8,
-  0x87fa, 0x87ff, 0x8801, 0x8803, 0x8806, 0x8809, 0x880a, 0x880b,
-  0x8810, 0x8819, 0x8812, 0x8813, 0x8814, 0x8818, 0x881a, 0x881b,
-  0x881c, 0x881e, 0x881f, 0x8828, 0x882d, 0x882e, 0x8830, 0x8832,
-  0x8835, 0x883a, 0x883c, 0x8841, 0x8843, 0x8845, 0x8848, 0x8849,
-  0x884a, 0x884b, 0x884e, 0x8851, 0x8855, 0x8856, 0x8858, 0x885a,
-  0x885c, 0x885f, 0x8860, 0x8864, 0x8869, 0x8871, 0x8879, 0x887b,
-  0x8880, 0x8898, 0x889a, 0x889b, 0x889c, 0x889f, 0x88a0, 0x88a8,
-  0x88aa, 0x88ba, 0x88bd, 0x88be, 0x88c0, 0x88ca, 0x88cb, 0x88cc,
-  0x88cd, 0x88ce, 0x88d1, 0x88d2, 0x88d3, 0x88db, 0x88de, 0x88e7,
-  0x88ef, 0x88f0, 0x88f1, 0x88f5, 0x88f7, 0x8901, 0x8906, 0x890d,
-  0x890e, 0x890f, 0x8915, 0x8916, 0x8918, 0x8919, 0x891a, 0x891c,
-  0x8920, 0x8926, 0x8927, 0x8928, 0x8930, 0x8931, 0x8932, 0x8935,
-  0x8939, 0x893a, 0x893e, 0x8940, 0x8942, 0x8945, 0x8946, 0x8949,
-  0x894f, 0x8952, 0x8957, 0x895a, 0x895b, 0x895c, 0x8961, 0x8962,
-  0x8963, 0x896b, 0x896e, 0x8970, 0x8973, 0x8975, 0x897a, 0x897b,
-  0x897c, 0x897d, 0x8989, 0x898d, 0x8990, 0x8994, 0x8995, 0x899b,
-  0x899c, 0x899f, 0x89a0, 0x89a5, 0x89b0, 0x89b4, 0x89b5, 0x89b6,
-  0x89b7, 0x89bc, 0x89d4, 0x89d5, 0x89d6, 0x89d7, 0x89d8, 0x89e5,
-  0x89e9, 0x89eb, 0x89ed, 0x89f1, 0x89f3, 0x89f6, 0x89f9, 0x89fd,
-  0x89ff, 0x8a04, 0x8a05, 0x8a07, 0x8a0f, 0x8a11, 0x8a12, 0x8a14,
-  0x8a15, 0x8a1e, 0x8a20, 0x8a22, 0x8a24, 0x8a26, 0x8a2b, 0x8a2c,
-  0x8a2f, 0x8a35, 0x8a37, 0x8a3d, 0x8a3e, 0x8a40, 0x8a43, 0x8a45,
-  0x8a47, 0x8a49, 0x8a4d, 0x8a4e, 0x8a53, 0x8a56, 0x8a57, 0x8a58,
-  0x8a5c, 0x8a5d, 0x8a61, 0x8a65, 0x8a67, 0x8a75, 0x8a76, 0x8a77,
-  0x8a79, 0x8a7a, 0x8a7b, 0x8a7e, 0x8a7f, 0x8a80, 0x8a83, 0x8a86,
-  0x8a8b, 0x8a8f, 0x8a90, 0x8a92, 0x8a96, 0x8a97, 0x8a99, 0x8a9f,
-  0x8aa7, 0x8aa9, 0x8aae, 0x8aaf, 0x8ab3, 0x8ab6, 0x8ab7, 0x8abb,
-  0x8abe, 0x8ac3, 0x8ac6, 0x8ac8, 0x8ac9, 0x8aca, 0x8ad1, 0x8ad3,
-  0x8ad4, 0x8ad5, 0x8ad7, 0x8add, 0x8adf, 0x8aec, 0x8af0, 0x8af4,
-  0x8af5, 0x8af6, 0x8afc, 0x8aff, 0x8b05, 0x8b06, 0x8b0b, 0x8b11,
-  0x8b1c, 0x8b1e, 0x8b1f, 0x8b0a, 0x8b2d, 0x8b30, 0x8b37, 0x8b3c,
-  0x8b42, 0x8b43, 0x8b44, 0x8b45, 0x8b46, 0x8b48, 0x8b52, 0x8b53,
-  0x8b54, 0x8b59, 0x8b4d, 0x8b5e, 0x8b63, 0x8b6d, 0x8b76, 0x8b78,
-  0x8b79, 0x8b7c, 0x8b7e, 0x8b81, 0x8b84, 0x8b85, 0x8b8b, 0x8b8d,
-  0x8b8f, 0x8b94, 0x8b95, 0x8b9c, 0x8b9e, 0x8b9f, 0x8c38, 0x8c39,
-  0x8c3d, 0x8c3e, 0x8c45, 0x8c47, 0x8c49, 0x8c4b, 0x8c4f, 0x8c51,
-  0x8c53, 0x8c54, 0x8c57, 0x8c58, 0x8c5b, 0x8c5d, 0x8c59, 0x8c63,
-  0x8c64, 0x8c66, 0x8c68, 0x8c69, 0x8c6d, 0x8c73, 0x8c75, 0x8c76,
-  0x8c7b, 0x8c7e, 0x8c86, 0x8c87, 0x8c8b, 0x8c90, 0x8c92, 0x8c93,
-  0x8c99, 0x8c9b, 0x8c9c, 0x8ca4, 0x8cb9, 0x8cba, 0x8cc5, 0x8cc6,
-  0x8cc9, 0x8ccb, 0x8ccf, 0x8cd6, 0x8cd5, 0x8cd9, 0x8cdd, 0x8ce1,
-  0x8ce8, 0x8cec, 0x8cef, 0x8cf0, 0x8cf2, 0x8cf5, 0x8cf7, 0x8cf8,
-  0x8cfe, 0x8cff, 0x8d01, 0x8d03, 0x8d09, 0x8d12, 0x8d17, 0x8d1b,
-  0x8d65, 0x8d69, 0x8d6c, 0x8d6e, 0x8d7f, 0x8d82, 0x8d84, 0x8d88,
-  0x8d8d, 0x8d90, 0x8d91, 0x8d95, 0x8d9e, 0x8d9f, 0x8da0, 0x8da6,
-  0x8dab, 0x8dac, 0x8daf, 0x8db2, 0x8db5, 0x8db7, 0x8db9, 0x8dbb,
-  0x8dc0, 0x8dc5, 0x8dc6, 0x8dc7, 0x8dc8, 0x8dca, 0x8dce, 0x8dd1,
-  0x8dd4, 0x8dd5, 0x8dd7, 0x8dd9, 0x8de4, 0x8de5, 0x8de7, 0x8dec,
-  0x8df0, 0x8dbc, 0x8df1, 0x8df2, 0x8df4, 0x8dfd, 0x8e01, 0x8e04,
-  0x8e05, 0x8e06, 0x8e0b, 0x8e11, 0x8e14, 0x8e16, 0x8e20, 0x8e21,
-  0x8e22, 0x8e23, 0x8e26, 0x8e27, 0x8e31, 0x8e33, 0x8e36, 0x8e37,
-  0x8e38, 0x8e39, 0x8e3d, 0x8e40, 0x8e41, 0x8e4b, 0x8e4d, 0x8e4e,
-  0x8e4f, 0x8e54, 0x8e5b, 0x8e5c, 0x8e5d, 0x8e5e, 0x8e61, 0x8e62,
-  0x8e69, 0x8e6c, 0x8e6d, 0x8e6f, 0x8e70, 0x8e71, 0x8e79, 0x8e7a,
-  0x8e7b, 0x8e82, 0x8e83, 0x8e89, 0x8e90, 0x8e92, 0x8e95, 0x8e9a,
-  0x8e9b, 0x8e9d, 0x8e9e, 0x8ea2, 0x8ea7, 0x8ea9, 0x8ead, 0x8eae,
-  0x8eb3, 0x8eb5, 0x8eba, 0x8ebb, 0x8ec0, 0x8ec1, 0x8ec3, 0x8ec4,
-  0x8ec7, 0x8ecf, 0x8ed1, 0x8ed4, 0x8edc, 0x8ee8, 0x8eee, 0x8ef0,
-  0x8ef1, 0x8ef7, 0x8ef9, 0x8efa, 0x8eed, 0x8f00, 0x8f02, 0x8f07,
-  0x8f08, 0x8f0f, 0x8f10, 0x8f16, 0x8f17, 0x8f18, 0x8f1e, 0x8f20,
-  0x8f21, 0x8f23, 0x8f25, 0x8f27, 0x8f28, 0x8f2c, 0x8f2d, 0x8f2e,
-  0x8f34, 0x8f35, 0x8f36, 0x8f37, 0x8f3a, 0x8f40, 0x8f41, 0x8f43,
-  0x8f47, 0x8f4f, 0x8f51, 0x8f52, 0x8f53, 0x8f54, 0x8f55, 0x8f58,
-  0x8f5d, 0x8f5e, 0x8f65, 0x8f9d, 0x8fa0, 0x8fa1, 0x8fa4, 0x8fa5,
-  0x8fa6, 0x8fb5, 0x8fb6, 0x8fb8, 0x8fbe, 0x8fc0, 0x8fc1, 0x8fc6,
-  0x8fca, 0x8fcb, 0x8fcd, 0x8fd0, 0x8fd2, 0x8fd3, 0x8fd5, 0x8fe0,
-  0x8fe3, 0x8fe4, 0x8fe8, 0x8fee, 0x8ff1, 0x8ff5, 0x8ff6, 0x8ffb,
-  0x8ffe, 0x9002, 0x9004, 0x9008, 0x900c, 0x9018, 0x901b, 0x9028,
-  0x9029, 0x902f, 0x902a, 0x902c, 0x902d, 0x9033, 0x9034, 0x9037,
-  0x903f, 0x9043, 0x9044, 0x904c, 0x905b, 0x905d, 0x9062, 0x9066,
-  0x9067, 0x906c, 0x9070, 0x9074, 0x9079, 0x9085, 0x9088, 0x908b,
-  0x908c, 0x908e, 0x9090, 0x9095, 0x9097, 0x9098, 0x9099, 0x909b,
-  0x90a0, 0x90a1, 0x90a2, 0x90a5, 0x90b0, 0x90b2, 0x90b3, 0x90b4,
-  0x90b6, 0x90bd, 0x90cc, 0x90be, 0x90c3, 0x90c4, 0x90c5, 0x90c7,
-  0x90c8, 0x90d5, 0x90d7, 0x90d8, 0x90d9, 0x90dc, 0x90dd, 0x90df,
-  0x90e5, 0x90d2, 0x90f6, 0x90eb, 0x90ef, 0x90f0, 0x90f4, 0x90fe,
-  0x90ff, 0x9100, 0x9104, 0x9105, 0x9106, 0x9108, 0x910d, 0x9110,
-  0x9114, 0x9116, 0x9117, 0x9118, 0x911a, 0x911c, 0x911e, 0x9120,
-  0x9125, 0x9122, 0x9123, 0x9127, 0x9129, 0x912e, 0x912f, 0x9131,
-  0x9134, 0x9136, 0x9137, 0x9139, 0x913a, 0x913c, 0x913d, 0x9143,
-  0x9147, 0x9148, 0x914f, 0x9153, 0x9157, 0x9159, 0x915a, 0x915b,
-  0x9161, 0x9164, 0x9167, 0x916d, 0x9174, 0x9179, 0x917a, 0x917b,
-  0x9181, 0x9183, 0x9185, 0x9186, 0x918a, 0x918e, 0x9191, 0x9193,
-  0x9194, 0x9195, 0x9198, 0x919e, 0x91a1, 0x91a6, 0x91a8, 0x91ac,
-  0x91ad, 0x91ae, 0x91b0, 0x91b1, 0x91b2, 0x91b3, 0x91b6, 0x91bb,
-  0x91bc, 0x91bd, 0x91bf, 0x91c2, 0x91c3, 0x91c5, 0x91d3, 0x91d4,
-  0x91d7, 0x91d9, 0x91da, 0x91de, 0x91e4, 0x91e5, 0x91e9, 0x91ea,
-  0x91ec, 0x91ed, 0x91ee, 0x91ef, 0x91f0, 0x91f1, 0x91f7, 0x91f9,
-  0x91fb, 0x91fd, 0x9200, 0x9201, 0x9204, 0x9205, 0x9206, 0x9207,
-  0x9209, 0x920a, 0x920c, 0x9210, 0x9212, 0x9213, 0x9216, 0x9218,
-  0x921c, 0x921d, 0x9223, 0x9224, 0x9225, 0x9226, 0x9228, 0x922e,
-  0x922f, 0x9230, 0x9233, 0x9235, 0x9236, 0x9238, 0x9239, 0x923a,
-  0x923c, 0x923e, 0x9240, 0x9242, 0x9243, 0x9246, 0x9247, 0x924a,
-  0x924d, 0x924e, 0x924f, 0x9251, 0x9258, 0x9259, 0x925c, 0x925d,
-  0x9260, 0x9261, 0x9265, 0x9267, 0x9268, 0x9269, 0x926e, 0x926f,
-  0x9270, 0x9275, 0x9276, 0x9277, 0x9278, 0x9279, 0x927b, 0x927c,
-  0x927d, 0x927f, 0x9288, 0x9289, 0x928a, 0x928d, 0x928e, 0x9292,
-  0x9297, 0x9299, 0x929f, 0x92a0, 0x92a4, 0x92a5, 0x92a7, 0x92a8,
-  0x92ab, 0x92af, 0x92b2, 0x92b6, 0x92b8, 0x92ba, 0x92bb, 0x92bc,
-  0x92bd, 0x92bf, 0x92c0, 0x92c1, 0x92c2, 0x92c3, 0x92c5, 0x92c6,
-  0x92c7, 0x92c8, 0x92cb, 0x92cc, 0x92cd, 0x92ce, 0x92d0, 0x92d3,
-  0x92d5, 0x92d7, 0x92d8, 0x92d9, 0x92dc, 0x92dd, 0x92df, 0x92e0,
-  0x92e1, 0x92e3, 0x92e5, 0x92e7, 0x92e8, 0x92ec, 0x92ee, 0x92f0,
-  0x92f9, 0x92fb, 0x92ff, 0x9300, 0x9302, 0x9308, 0x930d, 0x9311,
-  0x9314, 0x9315, 0x931c, 0x931d, 0x931e, 0x931f, 0x9321, 0x9324,
-  0x9325, 0x9327, 0x9329, 0x932a, 0x9333, 0x9334, 0x9336, 0x9337,
-  0x9347, 0x9348, 0x9349, 0x9350, 0x9351, 0x9352, 0x9355, 0x9357,
-  0x9358, 0x935a, 0x935e, 0x9364, 0x9365, 0x9367, 0x9369, 0x936a,
-  0x936d, 0x936f, 0x9370, 0x9371, 0x9373, 0x9374, 0x9376, 0x937a,
-  0x937d, 0x937f, 0x9380, 0x9381, 0x9382, 0x9388, 0x938a, 0x938b,
-  0x938d, 0x938f, 0x9392, 0x9395, 0x9398, 0x939b, 0x939e, 0x93a1,
-  0x93a3, 0x93a4, 0x93a6, 0x93a8, 0x93ab, 0x93b4, 0x93b5, 0x93b6,
-  0x93ba, 0x93a9, 0x93c1, 0x93c4, 0x93c5, 0x93c6, 0x93c7, 0x93c9,
-  0x93ca, 0x93cb, 0x93cc, 0x93cd, 0x93d3, 0x93d9, 0x93dc, 0x93de,
-  0x93df, 0x93e2, 0x93e6, 0x93e7, 0x93f9, 0x93f7, 0x93f8, 0x93fa,
-  0x93fb, 0x93fd, 0x9401, 0x9402, 0x9404, 0x9408, 0x9409, 0x940d,
-  0x940e, 0x940f, 0x9415, 0x9416, 0x9417, 0x941f, 0x942e, 0x942f,
-  0x9431, 0x9432, 0x9433, 0x9434, 0x943b, 0x943f, 0x943d, 0x9443,
-  0x9445, 0x9448, 0x944a, 0x944c, 0x9455, 0x9459, 0x945c, 0x945f,
-  0x9461, 0x9463, 0x9468, 0x946b, 0x946d, 0x946e, 0x946f, 0x9471,
-  0x9472, 0x9484, 0x9483, 0x9578, 0x9579, 0x957e, 0x9584, 0x9588,
-  0x958c, 0x958d, 0x958e, 0x959d, 0x959e, 0x959f, 0x95a1, 0x95a6,
-  0x95a9, 0x95ab, 0x95ac, 0x95b4, 0x95b6, 0x95ba, 0x95bd, 0x95bf,
-  0x95c6, 0x95c8, 0x95c9, 0x95cb, 0x95d0, 0x95d1, 0x95d2, 0x95d3,
-  0x95d9, 0x95da, 0x95dd, 0x95de, 0x95df, 0x95e0, 0x95e4, 0x95e6,
-  0x961d, 0x961e, 0x9622, 0x9624, 0x9625, 0x9626, 0x962c, 0x9631,
-  0x9633, 0x9637, 0x9638, 0x9639, 0x963a, 0x963c, 0x963d, 0x9641,
-  0x9652, 0x9654, 0x9656, 0x9657, 0x9658, 0x9661, 0x966e, 0x9674,
-  0x967b, 0x967c, 0x967e, 0x967f, 0x9681, 0x9682, 0x9683, 0x9684,
-  0x9689, 0x9691, 0x9696, 0x969a, 0x969d, 0x969f, 0x96a4, 0x96a5,
-  0x96a6, 0x96a9, 0x96ae, 0x96af, 0x96b3, 0x96ba, 0x96ca, 0x96d2,
-  0x5db2, 0x96d8, 0x96da, 0x96dd, 0x96de, 0x96df, 0x96e9, 0x96ef,
-  0x96f1, 0x96fa, 0x9702, 0x9703, 0x9705, 0x9709, 0x971a, 0x971b,
-  0x971d, 0x9721, 0x9722, 0x9723, 0x9728, 0x9731, 0x9733, 0x9741,
-  0x9743, 0x974a, 0x974e, 0x974f, 0x9755, 0x9757, 0x9758, 0x975a,
-  0x975b, 0x9763, 0x9767, 0x976a, 0x976e, 0x9773, 0x9776, 0x9777,
-  0x9778, 0x977b, 0x977d, 0x977f, 0x9780, 0x9789, 0x9795, 0x9796,
-  0x9797, 0x9799, 0x979a, 0x979e, 0x979f, 0x97a2, 0x97ac, 0x97ae,
-  0x97b1, 0x97b2, 0x97b5, 0x97b6, 0x97b8, 0x97b9, 0x97ba, 0x97bc,
-  0x97be, 0x97bf, 0x97c1, 0x97c4, 0x97c5, 0x97c7, 0x97c9, 0x97ca,
-  0x97cc, 0x97cd, 0x97ce, 0x97d0, 0x97d1, 0x97d4, 0x97d7, 0x97d8,
-  0x97d9, 0x97dd, 0x97de, 0x97e0, 0x97db, 0x97e1, 0x97e4, 0x97ef,
-  0x97f1, 0x97f4, 0x97f7, 0x97f8, 0x97fa, 0x9807, 0x980a, 0x9819,
-  0x980d, 0x980e, 0x9814, 0x9816, 0x981c, 0x981e, 0x9820, 0x9823,
-  0x9826, 0x982b, 0x982e, 0x982f, 0x9830, 0x9832, 0x9833, 0x9835,
-  0x9825, 0x983e, 0x9844, 0x9847, 0x984a, 0x9851, 0x9852, 0x9853,
-  0x9856, 0x9857, 0x9859, 0x985a, 0x9862, 0x9863, 0x9865, 0x9866,
-  0x986a, 0x986c, 0x98ab, 0x98ad, 0x98ae, 0x98b0, 0x98b4, 0x98b7,
-  0x98b8, 0x98ba, 0x98bb, 0x98bf, 0x98c2, 0x98c5, 0x98c8, 0x98cc,
-  0x98e1, 0x98e3, 0x98e5, 0x98e6, 0x98e7, 0x98ea, 0x98f3, 0x98f6,
-  0x9902, 0x9907, 0x9908, 0x9911, 0x9915, 0x9916, 0x9917, 0x991a,
-  0x991b, 0x991c, 0x991f, 0x9922, 0x9926, 0x9927, 0x992b, 0x9931,
-  0x9932, 0x9933, 0x9934, 0x9935, 0x9939, 0x993a, 0x993b, 0x993c,
-  0x9940, 0x9941, 0x9946, 0x9947, 0x9948, 0x994d, 0x994e, 0x9954,
-  0x9958, 0x9959, 0x995b, 0x995c, 0x995e, 0x995f, 0x9960, 0x999b,
-  0x999d, 0x999f, 0x99a6, 0x99b0, 0x99b1, 0x99b2, 0x99b5, 0x99b9,
-  0x99ba, 0x99bd, 0x99bf, 0x99c3, 0x99c9, 0x99d3, 0x99d4, 0x99d9,
-  0x99da, 0x99dc, 0x99de, 0x99e7, 0x99ea, 0x99eb, 0x99ec, 0x99f0,
-  0x99f4, 0x99f5, 0x99f9, 0x99fd, 0x99fe, 0x9a02, 0x9a03, 0x9a04,
-  0x9a0b, 0x9a0c, 0x9a10, 0x9a11, 0x9a16, 0x9a1e, 0x9a20, 0x9a22,
-  0x9a23, 0x9a24, 0x9a27, 0x9a2d, 0x9a2e, 0x9a33, 0x9a35, 0x9a36,
-  0x9a38, 0x9a47, 0x9a41, 0x9a44, 0x9a4a, 0x9a4b, 0x9a4c, 0x9a4e,
-  0x9a51, 0x9a54, 0x9a56, 0x9a5d, 0x9aaa, 0x9aac, 0x9aae, 0x9aaf,
-  0x9ab2, 0x9ab4, 0x9ab5, 0x9ab6, 0x9ab9, 0x9abb, 0x9abe, 0x9abf,
-  0x9ac1, 0x9ac3, 0x9ac6, 0x9ac8, 0x9ace, 0x9ad0, 0x9ad2, 0x9ad5,
-  0x9ad6, 0x9ad7, 0x9adb, 0x9adc, 0x9ae0, 0x9ae4, 0x9ae5, 0x9ae7,
-  0x9ae9, 0x9aec, 0x9af2, 0x9af3, 0x9af5, 0x9af9, 0x9afa, 0x9afd,
-  0x9aff, 0x9b00, 0x9b01, 0x9b02, 0x9b03, 0x9b04, 0x9b05, 0x9b08,
-  0x9b09, 0x9b0b, 0x9b0c, 0x9b0d, 0x9b0e, 0x9b10, 0x9b12, 0x9b16,
-  0x9b19, 0x9b1b, 0x9b1c, 0x9b20, 0x9b26, 0x9b2b, 0x9b2d, 0x9b33,
-  0x9b34, 0x9b35, 0x9b37, 0x9b39, 0x9b3a, 0x9b3d, 0x9b48, 0x9b4b,
-  0x9b4c, 0x9b55, 0x9b56, 0x9b57, 0x9b5b, 0x9b5e, 0x9b61, 0x9b63,
-  0x9b65, 0x9b66, 0x9b68, 0x9b6a, 0x9b6b, 0x9b6c, 0x9b6d, 0x9b6e,
-  0x9b73, 0x9b75, 0x9b77, 0x9b78, 0x9b79, 0x9b7f, 0x9b80, 0x9b84,
-  0x9b85, 0x9b86, 0x9b87, 0x9b89, 0x9b8a, 0x9b8b, 0x9b8d, 0x9b8f,
-  0x9b90, 0x9b94, 0x9b9a, 0x9b9d, 0x9b9e, 0x9ba6, 0x9ba7, 0x9ba9,
-  0x9bac, 0x9bb0, 0x9bb1, 0x9bb2, 0x9bb7, 0x9bb8, 0x9bbb, 0x9bbc,
-  0x9bbe, 0x9bbf, 0x9bc1, 0x9bc7, 0x9bc8, 0x9bce, 0x9bd0, 0x9bd7,
-  0x9bd8, 0x9bdd, 0x9bdf, 0x9be5, 0x9be7, 0x9bea, 0x9beb, 0x9bef,
-  0x9bf3, 0x9bf7, 0x9bf8, 0x9bf9, 0x9bfa, 0x9bfd, 0x9bff, 0x9c00,
-  0x9c02, 0x9c0b, 0x9c0f, 0x9c11, 0x9c16, 0x9c18, 0x9c19, 0x9c1a,
-  0x9c1c, 0x9c1e, 0x9c22, 0x9c23, 0x9c26, 0x9c27, 0x9c28, 0x9c29,
-  0x9c2a, 0x9c31, 0x9c35, 0x9c36, 0x9c37, 0x9c3d, 0x9c41, 0x9c43,
-  0x9c44, 0x9c45, 0x9c49, 0x9c4a, 0x9c4e, 0x9c4f, 0x9c50, 0x9c53,
-  0x9c54, 0x9c56, 0x9c58, 0x9c5b, 0x9c5d, 0x9c5e, 0x9c5f, 0x9c63,
-  0x9c69, 0x9c6a, 0x9c5c, 0x9c6b, 0x9c68, 0x9c6e, 0x9c70, 0x9c72,
-  0x9c75, 0x9c77, 0x9c7b, 0x9ce6, 0x9cf2, 0x9cf7, 0x9cf9, 0x9d0b,
-  0x9d02, 0x9d11, 0x9d17, 0x9d18, 0x9d1c, 0x9d1d, 0x9d1e, 0x9d2f,
-  0x9d30, 0x9d32, 0x9d33, 0x9d34, 0x9d3a, 0x9d3c, 0x9d45, 0x9d3d,
-  0x9d42, 0x9d43, 0x9d47, 0x9d4a, 0x9d53, 0x9d54, 0x9d5f, 0x9d63,
-  0x9d62, 0x9d65, 0x9d69, 0x9d6a, 0x9d6b, 0x9d70, 0x9d76, 0x9d77,
-  0x9d7b, 0x9d7c, 0x9d7e, 0x9d83, 0x9d84, 0x9d86, 0x9d8a, 0x9d8d,
-  0x9d8e, 0x9d92, 0x9d93, 0x9d95, 0x9d96, 0x9d97, 0x9d98, 0x9da1,
-  0x9daa, 0x9dac, 0x9dae, 0x9db1, 0x9db5, 0x9db9, 0x9dbc, 0x9dbf,
-  0x9dc3, 0x9dc7, 0x9dc9, 0x9dca, 0x9dd4, 0x9dd5, 0x9dd6, 0x9dd7,
-  0x9dda, 0x9dde, 0x9ddf, 0x9de0, 0x9de5, 0x9de7, 0x9de9, 0x9deb,
-  0x9dee, 0x9df0, 0x9df3, 0x9df4, 0x9dfe, 0x9e0a, 0x9e02, 0x9e07,
-  0x9e0e, 0x9e10, 0x9e11, 0x9e12, 0x9e15, 0x9e16, 0x9e19, 0x9e1c,
-  0x9e1d, 0x9e7a, 0x9e7b, 0x9e7c, 0x9e80, 0x9e82, 0x9e83, 0x9e84,
-  0x9e85, 0x9e87, 0x9e8e, 0x9e8f, 0x9e96, 0x9e98, 0x9e9b, 0x9e9e,
-  0x9ea4, 0x9ea8, 0x9eac, 0x9eae, 0x9eaf, 0x9eb0, 0x9eb3, 0x9eb4,
-  0x9eb5, 0x9ec6, 0x9ec8, 0x9ecb, 0x9ed5, 0x9edf, 0x9ee4, 0x9ee7,
-  0x9eec, 0x9eed, 0x9eee, 0x9ef0, 0x9ef1, 0x9ef2, 0x9ef5, 0x9ef8,
-  0x9eff, 0x9f02, 0x9f03, 0x9f09, 0x9f0f, 0x9f10, 0x9f11, 0x9f12,
-  0x9f14, 0x9f16, 0x9f17, 0x9f19, 0x9f1a, 0x9f1b, 0x9f1f, 0x9f22,
-  0x9f26, 0x9f2a, 0x9f2b, 0x9f2f, 0x9f31, 0x9f32, 0x9f34, 0x9f37,
-  0x9f39, 0x9f3a, 0x9f3c, 0x9f3d, 0x9f3f, 0x9f41, 0x9f43, 0x9f44,
-  0x9f45, 0x9f46, 0x9f47, 0x9f53, 0x9f55, 0x9f56, 0x9f57, 0x9f58,
-  0x9f5a, 0x9f5d, 0x9f5e, 0x9f68, 0x9f69, 0x9f6d, 0x9f6e, 0x9f6f,
-  0x9f70, 0x9f71, 0x9f73, 0x9f75, 0x9f7a, 0x9f7d, 0x9f8f, 0x9f90,
-  0x9f91, 0x9f92, 0x9f94, 0x9f96, 0x9f97, 0x9f9e, 0x9fa1, 0x9fa2,
-  0x9fa3, 0x9fa5
-};
-
-
-/* The UCS char covered by JIS X0212 are sparsely distributed.  So we
-   use again a two-step mapping table.  The index table can be computed
-   using
-
-   egrep '^0x[[:xdigit:]][[:xdigit:]][[:xdigit:]][[:xdigit:]]' \
-     ../eastasia/jis/jis0212.txt | awk '{ print $2, $1 }' | sort -u |
-   perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $first=$last=$idx=0;
-   while (<>) {
-     local($ucs,$jis,%rest) = split;
-     local($u)=hex($ucs);
-     local($j)=hex($jis);
-     if ($u - $last > 6) {
-       if ($last != 0) {
-	 printf ("  { start: %#06x, end: %#06x, idx: %5d },\n",
-		 $first, $last, $idx);
-	 $idx += $last - $first + 1;
-       }
-       $first=$u;
-     }
-     $last=$u;
-   }
-   printf ("  { start: %#06x, end: %#06x, idx: %5d }, \n",
-	   $first, $last, $idx);
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const struct jisx0212_idx __jisx0212_from_ucs_idx[] =
-{
-  { start: 0x007e, end: 0x007e, idx:     0 },
-  { start: 0x00a1, end: 0x00af, idx:     1 },
-  { start: 0x00b8, end: 0x017e, idx:    16 },
-  { start: 0x01cd, end: 0x01dc, idx:   215 },
-  { start: 0x01f5, end: 0x01f5, idx:   231 },
-  { start: 0x02c7, end: 0x02c7, idx:   232 },
-  { start: 0x02d8, end: 0x02dd, idx:   233 },
-  { start: 0x0384, end: 0x0390, idx:   239 },
-  { start: 0x03aa, end: 0x03b0, idx:   252 },
-  { start: 0x03c2, end: 0x03c2, idx:   259 },
-  { start: 0x03ca, end: 0x03ce, idx:   260 },
-  { start: 0x0402, end: 0x040f, idx:   265 },
-  { start: 0x0452, end: 0x045f, idx:   279 },
-  { start: 0x2116, end: 0x2116, idx:   293 },
-  { start: 0x2122, end: 0x2122, idx:   294 },
-  { start: 0x4e02, end: 0x4e05, idx:   295 },
-  { start: 0x4e0c, end: 0x4e12, idx:   299 },
-  { start: 0x4e1f, end: 0x4e35, idx:   306 },
-  { start: 0x4e40, end: 0x4e47, idx:   329 },
-  { start: 0x4e51, end: 0x4e51, idx:   337 },
-  { start: 0x4e5a, end: 0x4e5c, idx:   338 },
-  { start: 0x4e63, end: 0x4e69, idx:   341 },
-  { start: 0x4e74, end: 0x4e7f, idx:   348 },
-  { start: 0x4e8d, end: 0x4e8d, idx:   360 },
-  { start: 0x4e96, end: 0x4e9d, idx:   361 },
-  { start: 0x4eaf, end: 0x4eaf, idx:   369 },
-  { start: 0x4eb9, end: 0x4eb9, idx:   370 },
-  { start: 0x4ec3, end: 0x4ec3, idx:   371 },
-  { start: 0x4ed0, end: 0x4ed0, idx:   372 },
-  { start: 0x4eda, end: 0x4ee8, idx:   373 },
-  { start: 0x4eef, end: 0x4ef5, idx:   388 },
-  { start: 0x4efd, end: 0x4f19, idx:   395 },
-  { start: 0x4f2e, end: 0x4f58, idx:   424 },
-  { start: 0x4f5f, end: 0x4f63, idx:   467 },
-  { start: 0x4f6a, end: 0x4f9f, idx:   472 },
-  { start: 0x4fb2, end: 0x4fd2, idx:   526 },
-  { start: 0x4fdc, end: 0x4fe2, idx:   559 },
-  { start: 0x4ff0, end: 0x4ff2, idx:   566 },
-  { start: 0x4ffc, end: 0x5027, idx:   569 },
-  { start: 0x502e, end: 0x5071, idx:   613 },
-  { start: 0x5081, end: 0x50a2, idx:   681 },
-  { start: 0x50aa, end: 0x50b0, idx:   715 },
-  { start: 0x50b9, end: 0x5110, idx:   722 },
-  { start: 0x5117, end: 0x5139, idx:   810 },
-  { start: 0x5142, end: 0x5142, idx:   845 },
-  { start: 0x514a, end: 0x5158, idx:   846 },
-  { start: 0x515f, end: 0x5166, idx:   861 },
-  { start: 0x517e, end: 0x5184, idx:   869 },
-  { start: 0x518b, end: 0x518e, idx:   876 },
-  { start: 0x5198, end: 0x51a3, idx:   880 },
-  { start: 0x51ad, end: 0x51ad, idx:   892 },
-  { start: 0x51b8, end: 0x51c8, idx:   893 },
-  { start: 0x51cf, end: 0x51e5, idx:   910 },
-  { start: 0x51ee, end: 0x51f7, idx:   933 },
-  { start: 0x5201, end: 0x5205, idx:   943 },
-  { start: 0x5212, end: 0x5218, idx:   948 },
-  { start: 0x5222, end: 0x5228, idx:   955 },
-  { start: 0x5231, end: 0x5235, idx:   962 },
-  { start: 0x523c, end: 0x523c, idx:   967 },
-  { start: 0x5245, end: 0x5249, idx:   968 },
-  { start: 0x5255, end: 0x5266, idx:   973 },
-  { start: 0x526e, end: 0x526e, idx:   991 },
-  { start: 0x5277, end: 0x5279, idx:   992 },
-  { start: 0x5280, end: 0x528c, idx:   995 },
-  { start: 0x5293, end: 0x529c, idx:  1008 },
-  { start: 0x52a4, end: 0x52a7, idx:  1018 },
-  { start: 0x52af, end: 0x52f7, idx:  1022 },
-  { start: 0x5300, end: 0x5303, idx:  1095 },
-  { start: 0x530a, end: 0x5335, idx:  1099 },
-  { start: 0x533c, end: 0x5342, idx:  1143 },
-  { start: 0x534b, end: 0x534c, idx:  1150 },
-  { start: 0x5359, end: 0x5365, idx:  1152 },
-  { start: 0x536c, end: 0x5372, idx:  1165 },
-  { start: 0x5379, end: 0x53c5, idx:  1172 },
-  { start: 0x53cf, end: 0x53e7, idx:  1249 },
-  { start: 0x53f5, end: 0x53f5, idx:  1274 },
-  { start: 0x5402, end: 0x5402, idx:  1275 },
-  { start: 0x5413, end: 0x5413, idx:  1276 },
-  { start: 0x541a, end: 0x541a, idx:  1277 },
-  { start: 0x5421, end: 0x5435, idx:  1278 },
-  { start: 0x5443, end: 0x544f, idx:  1299 },
-  { start: 0x545e, end: 0x5474, idx:  1312 },
-  { start: 0x547f, end: 0x54bf, idx:  1335 },
-  { start: 0x54c6, end: 0x54ce, idx:  1400 },
-  { start: 0x54e0, end: 0x54e0, idx:  1409 },
-  { start: 0x54ea, end: 0x54ef, idx:  1410 },
-  { start: 0x54f6, end: 0x550e, idx:  1416 },
-  { start: 0x5515, end: 0x5515, idx:  1441 },
-  { start: 0x552a, end: 0x552b, idx:  1442 },
-  { start: 0x5532, end: 0x5551, idx:  1444 },
-  { start: 0x5558, end: 0x5566, idx:  1476 },
-  { start: 0x557f, end: 0x5597, idx:  1491 },
-  { start: 0x55a3, end: 0x55a4, idx:  1516 },
-  { start: 0x55ad, end: 0x55b2, idx:  1518 },
-  { start: 0x55bf, end: 0x55e2, idx:  1524 },
-  { start: 0x55e9, end: 0x55e9, idx:  1560 },
-  { start: 0x55f6, end: 0x55f6, idx:  1561 },
-  { start: 0x55ff, end: 0x5612, idx:  1562 },
-  { start: 0x5619, end: 0x5619, idx:  1582 },
-  { start: 0x562c, end: 0x5654, idx:  1583 },
-  { start: 0x565e, end: 0x5675, idx:  1624 },
-  { start: 0x5684, end: 0x568c, idx:  1648 },
-  { start: 0x5695, end: 0x569f, idx:  1657 },
-  { start: 0x56a6, end: 0x56b7, idx:  1668 },
-  { start: 0x56be, end: 0x56be, idx:  1686 },
-  { start: 0x56c5, end: 0x56d0, idx:  1687 },
-  { start: 0x56d9, end: 0x56f7, idx:  1699 },
-  { start: 0x5701, end: 0x5734, idx:  1730 },
-  { start: 0x573d, end: 0x5752, idx:  1782 },
-  { start: 0x5762, end: 0x5783, idx:  1804 },
-  { start: 0x578c, end: 0x578c, idx:  1838 },
-  { start: 0x5794, end: 0x57ac, idx:  1839 },
-  { start: 0x57b8, end: 0x57bd, idx:  1864 },
-  { start: 0x57c7, end: 0x57d5, idx:  1870 },
-  { start: 0x57dd, end: 0x580d, idx:  1885 },
-  { start: 0x581b, end: 0x5832, idx:  1934 },
-  { start: 0x5839, end: 0x583f, idx:  1958 },
-  { start: 0x5849, end: 0x5855, idx:  1965 },
-  { start: 0x585f, end: 0x5868, idx:  1978 },
-  { start: 0x5878, end: 0x5896, idx:  1988 },
-  { start: 0x589d, end: 0x58a9, idx:  2019 },
-  { start: 0x58b1, end: 0x58b2, idx:  2032 },
-  { start: 0x58bc, end: 0x58e2, idx:  2034 },
-  { start: 0x58e9, end: 0x58e9, idx:  2073 },
-  { start: 0x58f3, end: 0x58f3, idx:  2074 },
-  { start: 0x5905, end: 0x5914, idx:  2075 },
-  { start: 0x591d, end: 0x5928, idx:  2091 },
-  { start: 0x592f, end: 0x5936, idx:  2103 },
-  { start: 0x593f, end: 0x5946, idx:  2111 },
-  { start: 0x5952, end: 0x5963, idx:  2119 },
-  { start: 0x596b, end: 0x597c, idx:  2137 },
-  { start: 0x598b, end: 0x5997, idx:  2155 },
-  { start: 0x599f, end: 0x59d2, idx:  2168 },
-  { start: 0x59dd, end: 0x59e7, idx:  2220 },
-  { start: 0x59ee, end: 0x59f7, idx:  2231 },
-  { start: 0x5a00, end: 0x5a04, idx:  2241 },
-  { start: 0x5a0c, end: 0x5a13, idx:  2246 },
-  { start: 0x5a1e, end: 0x5a30, idx:  2254 },
-  { start: 0x5a44, end: 0x5a55, idx:  2273 },
-  { start: 0x5a5e, end: 0x5a6d, idx:  2291 },
-  { start: 0x5a77, end: 0x5a7e, idx:  2307 },
-  { start: 0x5a8b, end: 0x5ac8, idx:  2315 },
-  { start: 0x5acf, end: 0x5acf, idx:  2377 },
-  { start: 0x5ada, end: 0x5aee, idx:  2378 },
-  { start: 0x5af5, end: 0x5af6, idx:  2399 },
-  { start: 0x5afd, end: 0x5b01, idx:  2401 },
-  { start: 0x5b08, end: 0x5b08, idx:  2406 },
-  { start: 0x5b17, end: 0x5b25, idx:  2407 },
-  { start: 0x5b2d, end: 0x5b2d, idx:  2422 },
-  { start: 0x5b34, end: 0x5b38, idx:  2423 },
-  { start: 0x5b41, end: 0x5b41, idx:  2428 },
-  { start: 0x5b4b, end: 0x5b56, idx:  2429 },
-  { start: 0x5b5e, end: 0x5b5e, idx:  2441 },
-  { start: 0x5b68, end: 0x5b6f, idx:  2442 },
-  { start: 0x5b7c, end: 0x5b96, idx:  2450 },
-  { start: 0x5ba8, end: 0x5bc1, idx:  2477 },
-  { start: 0x5bcd, end: 0x5bcf, idx:  2503 },
-  { start: 0x5bd6, end: 0x5be0, idx:  2506 },
-  { start: 0x5bef, end: 0x5bf4, idx:  2517 },
-  { start: 0x5bfd, end: 0x5bfd, idx:  2523 },
-  { start: 0x5c0c, end: 0x5c0c, idx:  2524 },
-  { start: 0x5c17, end: 0x5c17, idx:  2525 },
-  { start: 0x5c1e, end: 0x5c36, idx:  2526 },
-  { start: 0x5c59, end: 0x5c7d, idx:  2551 },
-  { start: 0x5c87, end: 0x5c92, idx:  2588 },
-  { start: 0x5c9d, end: 0x5caa, idx:  2600 },
-  { start: 0x5cb2, end: 0x5cba, idx:  2614 },
-  { start: 0x5cc9, end: 0x5ccb, idx:  2623 },
-  { start: 0x5cd2, end: 0x5cdd, idx:  2626 },
-  { start: 0x5cee, end: 0x5cf4, idx:  2638 },
-  { start: 0x5d01, end: 0x5d06, idx:  2645 },
-  { start: 0x5d0d, end: 0x5d12, idx:  2651 },
-  { start: 0x5d23, end: 0x5d4a, idx:  2657 },
-  { start: 0x5d51, end: 0x5d70, idx:  2697 },
-  { start: 0x5d79, end: 0x5d8a, idx:  2729 },
-  { start: 0x5d92, end: 0x5da0, idx:  2747 },
-  { start: 0x5da7, end: 0x5db9, idx:  2762 },
-  { start: 0x5dc3, end: 0x5dd0, idx:  2781 },
-  { start: 0x5dd8, end: 0x5dd9, idx:  2795 },
-  { start: 0x5de0, end: 0x5de9, idx:  2797 },
-  { start: 0x5df8, end: 0x5df9, idx:  2807 },
-  { start: 0x5e00, end: 0x5e00, idx:  2809 },
-  { start: 0x5e07, end: 0x5e18, idx:  2810 },
-  { start: 0x5e1f, end: 0x5e20, idx:  2828 },
-  { start: 0x5e28, end: 0x5e35, idx:  2830 },
-  { start: 0x5e3e, end: 0x5e3e, idx:  2844 },
-  { start: 0x5e49, end: 0x5e5e, idx:  2845 },
-  { start: 0x5e68, end: 0x5e70, idx:  2867 },
-  { start: 0x5e80, end: 0x5e80, idx:  2876 },
-  { start: 0x5e8b, end: 0x5e8e, idx:  2877 },
-  { start: 0x5ea2, end: 0x5eb3, idx:  2881 },
-  { start: 0x5ebd, end: 0x5ebf, idx:  2899 },
-  { start: 0x5ec6, end: 0x5ed5, idx:  2902 },
-  { start: 0x5edc, end: 0x5ede, idx:  2918 },
-  { start: 0x5ee5, end: 0x5eeb, idx:  2921 },
-  { start: 0x5f02, end: 0x5f0e, idx:  2928 },
-  { start: 0x5f19, end: 0x5f67, idx:  2941 },
-  { start: 0x5f6f, end: 0x5f7e, idx:  3020 },
-  { start: 0x5f89, end: 0x5f8f, idx:  3036 },
-  { start: 0x5f96, end: 0x5fb1, idx:  3043 },
-  { start: 0x5fb8, end: 0x5fb8, idx:  3071 },
-  { start: 0x5fc4, end: 0x5fd4, idx:  3072 },
-  { start: 0x5fde, end: 0x5ffc, idx:  3089 },
-  { start: 0x6007, end: 0x6024, idx:  3120 },
-  { start: 0x602d, end: 0x6035, idx:  3150 },
-  { start: 0x6040, end: 0x6040, idx:  3159 },
-  { start: 0x6047, end: 0x6067, idx:  3160 },
-  { start: 0x6071, end: 0x6071, idx:  3193 },
-  { start: 0x607e, end: 0x60a8, idx:  3194 },
-  { start: 0x60b0, end: 0x60e5, idx:  3237 },
-  { start: 0x60f2, end: 0x6122, idx:  3291 },
-  { start: 0x612a, end: 0x6139, idx:  3340 },
-  { start: 0x6141, end: 0x6149, idx:  3356 },
-  { start: 0x615e, end: 0x6160, idx:  3365 },
-  { start: 0x616c, end: 0x6184, idx:  3368 },
-  { start: 0x618b, end: 0x61ad, idx:  3393 },
-  { start: 0x61b8, end: 0x61c2, idx:  3428 },
-  { start: 0x61ce, end: 0x61d5, idx:  3439 },
-  { start: 0x61dc, end: 0x61ef, idx:  3447 },
-  { start: 0x6201, end: 0x6207, idx:  3467 },
-  { start: 0x6213, end: 0x6215, idx:  3474 },
-  { start: 0x621c, end: 0x622b, idx:  3477 },
-  { start: 0x6239, end: 0x625c, idx:  3493 },
-  { start: 0x6264, end: 0x6264, idx:  3529 },
-  { start: 0x626d, end: 0x6273, idx:  3530 },
-  { start: 0x627a, end: 0x627d, idx:  3537 },
-  { start: 0x628d, end: 0x6290, idx:  3541 },
-  { start: 0x62a6, end: 0x62a8, idx:  3545 },
-  { start: 0x62b3, end: 0x62c4, idx:  3548 },
-  { start: 0x62ce, end: 0x62ce, idx:  3566 },
-  { start: 0x62d5, end: 0x62da, idx:  3567 },
-  { start: 0x62ea, end: 0x62ea, idx:  3573 },
-  { start: 0x62f2, end: 0x62f4, idx:  3574 },
-  { start: 0x62fc, end: 0x6318, idx:  3577 },
-  { start: 0x6329, end: 0x632d, idx:  3606 },
-  { start: 0x6335, end: 0x635b, idx:  3611 },
-  { start: 0x6365, end: 0x63a6, idx:  3650 },
-  { start: 0x63ad, end: 0x63af, idx:  3716 },
-  { start: 0x63bd, end: 0x63d5, idx:  3719 },
-  { start: 0x63dc, end: 0x63f9, idx:  3744 },
-  { start: 0x6409, end: 0x6435, idx:  3774 },
-  { start: 0x643d, end: 0x643f, idx:  3819 },
-  { start: 0x644b, end: 0x6463, idx:  3822 },
-  { start: 0x646d, end: 0x6474, idx:  3847 },
-  { start: 0x647b, end: 0x647d, idx:  3855 },
-  { start: 0x6485, end: 0x6487, idx:  3858 },
-  { start: 0x648f, end: 0x6491, idx:  3861 },
-  { start: 0x6498, end: 0x64ac, idx:  3864 },
-  { start: 0x64b3, end: 0x64b3, idx:  3885 },
-  { start: 0x64bd, end: 0x64d7, idx:  3886 },
-  { start: 0x64e4, end: 0x6531, idx:  3913 },
-  { start: 0x653a, end: 0x6549, idx:  3991 },
-  { start: 0x6550, end: 0x6554, idx:  4007 },
-  { start: 0x655f, end: 0x6560, idx:  4012 },
-  { start: 0x6567, end: 0x656b, idx:  4014 },
-  { start: 0x657a, end: 0x658a, idx:  4019 },
-  { start: 0x6592, end: 0x65a6, idx:  4036 },
-  { start: 0x65ae, end: 0x65b4, idx:  4057 },
-  { start: 0x65bf, end: 0x65d8, idx:  4064 },
-  { start: 0x65df, end: 0x65df, idx:  4090 },
-  { start: 0x65f0, end: 0x6616, idx:  4091 },
-  { start: 0x661d, end: 0x6639, idx:  4130 },
-  { start: 0x6640, end: 0x6661, idx:  4159 },
-  { start: 0x666a, end: 0x666c, idx:  4193 },
-  { start: 0x6673, end: 0x6680, idx:  4196 },
-  { start: 0x668b, end: 0x6692, idx:  4210 },
-  { start: 0x6699, end: 0x66a4, idx:  4218 },
-  { start: 0x66ad, end: 0x66d4, idx:  4230 },
-  { start: 0x66db, end: 0x66df, idx:  4270 },
-  { start: 0x66e8, end: 0x66ee, idx:  4275 },
-  { start: 0x66fa, end: 0x66fb, idx:  4282 },
-  { start: 0x6705, end: 0x6707, idx:  4284 },
-  { start: 0x670e, end: 0x6722, idx:  4287 },
-  { start: 0x6733, end: 0x6733, idx:  4308 },
-  { start: 0x673e, end: 0x673e, idx:  4309 },
-  { start: 0x6745, end: 0x674c, idx:  4310 },
-  { start: 0x6754, end: 0x6755, idx:  4318 },
-  { start: 0x675d, end: 0x675d, idx:  4320 },
-  { start: 0x6766, end: 0x6784, idx:  4321 },
-  { start: 0x678e, end: 0x679b, idx:  4352 },
-  { start: 0x67b0, end: 0x67c9, idx:  4366 },
-  { start: 0x67d2, end: 0x67e6, idx:  4392 },
-  { start: 0x67f0, end: 0x67f9, idx:  4413 },
-  { start: 0x6814, end: 0x681f, idx:  4423 },
-  { start: 0x6827, end: 0x6833, idx:  4435 },
-  { start: 0x683b, end: 0x685b, idx:  4448 },
-  { start: 0x686b, end: 0x6888, idx:  4481 },
-  { start: 0x6896, end: 0x68b2, idx:  4511 },
-  { start: 0x68bb, end: 0x68bb, idx:  4540 },
-  { start: 0x68c5, end: 0x68dd, idx:  4541 },
-  { start: 0x68e5, end: 0x68fd, idx:  4566 },
-  { start: 0x6906, end: 0x6917, idx:  4591 },
-  { start: 0x6931, end: 0x693b, idx:  4609 },
-  { start: 0x6942, end: 0x694e, idx:  4620 },
-  { start: 0x6957, end: 0x695b, idx:  4633 },
-  { start: 0x6963, end: 0x6972, idx:  4638 },
-  { start: 0x697a, end: 0x6980, idx:  4654 },
-  { start: 0x698d, end: 0x6998, idx:  4661 },
-  { start: 0x69a1, end: 0x69af, idx:  4673 },
-  { start: 0x69b7, end: 0x69bc, idx:  4688 },
-  { start: 0x69c5, end: 0x69c8, idx:  4694 },
-  { start: 0x69d1, end: 0x69d7, idx:  4698 },
-  { start: 0x69e2, end: 0x69e5, idx:  4705 },
-  { start: 0x69ee, end: 0x69f5, idx:  4709 },
-  { start: 0x69fe, end: 0x6a03, idx:  4717 },
-  { start: 0x6a0f, end: 0x6a28, idx:  4723 },
-  { start: 0x6a30, end: 0x6a5b, idx:  4749 },
-  { start: 0x6a64, end: 0x6a6a, idx:  4793 },
-  { start: 0x6a71, end: 0x6a73, idx:  4800 },
-  { start: 0x6a7e, end: 0x6a91, idx:  4803 },
-  { start: 0x6a9b, end: 0x6ab4, idx:  4823 },
-  { start: 0x6abd, end: 0x6abf, idx:  4849 },
-  { start: 0x6ac6, end: 0x6add, idx:  4852 },
-  { start: 0x6ae4, end: 0x6af2, idx:  4876 },
-  { start: 0x6afc, end: 0x6b3f, idx:  4891 },
-  { start: 0x6b46, end: 0x6b60, idx:  4959 },
-  { start: 0x6b67, end: 0x6b75, idx:  4986 },
-  { start: 0x6b7d, end: 0x6b85, idx:  5001 },
-  { start: 0x6b97, end: 0x6bb0, idx:  5010 },
-  { start: 0x6bb8, end: 0x6bcc, idx:  5036 },
-  { start: 0x6bd6, end: 0x6bda, idx:  5057 },
-  { start: 0x6be1, end: 0x6be7, idx:  5062 },
-  { start: 0x6bee, end: 0x6c12, idx:  5069 },
-  { start: 0x6c19, end: 0x6c1f, idx:  5106 },
-  { start: 0x6c26, end: 0x6c3f, idx:  5113 },
-  { start: 0x6c4a, end: 0x6c5c, idx:  5139 },
-  { start: 0x6c67, end: 0x6c7b, idx:  5158 },
-  { start: 0x6c85, end: 0x6c89, idx:  5179 },
-  { start: 0x6c94, end: 0x6c9f, idx:  5184 },
-  { start: 0x6cb0, end: 0x6cb4, idx:  5196 },
-  { start: 0x6cc2, end: 0x6cc6, idx:  5201 },
-  { start: 0x6ccd, end: 0x6ce0, idx:  5206 },
-  { start: 0x6ce7, end: 0x6cf4, idx:  5226 },
-  { start: 0x6d04, end: 0x6d13, idx:  5240 },
-  { start: 0x6d1a, end: 0x6d1a, idx:  5256 },
-  { start: 0x6d26, end: 0x6d31, idx:  5257 },
-  { start: 0x6d39, end: 0x6d3f, idx:  5269 },
-  { start: 0x6d57, end: 0x6d57, idx:  5276 },
-  { start: 0x6d5e, end: 0x6d67, idx:  5277 },
-  { start: 0x6d6f, end: 0x6d70, idx:  5287 },
-  { start: 0x6d7c, end: 0x6d87, idx:  5289 },
-  { start: 0x6d91, end: 0x6d98, idx:  5301 },
-  { start: 0x6daa, end: 0x6dac, idx:  5309 },
-  { start: 0x6db4, end: 0x6dcf, idx:  5312 },
-  { start: 0x6dd6, end: 0x6e04, idx:  5340 },
-  { start: 0x6e1e, end: 0x6e27, idx:  5387 },
-  { start: 0x6e32, end: 0x6e3c, idx:  5397 },
-  { start: 0x6e44, end: 0x6e68, idx:  5408 },
-  { start: 0x6e73, end: 0x6e73, idx:  5445 },
-  { start: 0x6e7b, end: 0x6e7d, idx:  5446 },
-  { start: 0x6e8d, end: 0x6e99, idx:  5449 },
-  { start: 0x6ea0, end: 0x6ea0, idx:  5462 },
-  { start: 0x6ea7, end: 0x6eb3, idx:  5463 },
-  { start: 0x6ebb, end: 0x6ecf, idx:  5476 },
-  { start: 0x6eeb, end: 0x6eee, idx:  5497 },
-  { start: 0x6ef9, end: 0x6efd, idx:  5501 },
-  { start: 0x6f04, end: 0x6f0d, idx:  5506 },
-  { start: 0x6f16, end: 0x6f1b, idx:  5516 },
-  { start: 0x6f26, end: 0x6f3c, idx:  5522 },
-  { start: 0x6f4f, end: 0x6f6c, idx:  5545 },
-  { start: 0x6f7d, end: 0x6fbc, idx:  5575 },
-  { start: 0x6fc5, end: 0x6fca, idx:  5639 },
-  { start: 0x6fda, end: 0x6fde, idx:  5645 },
-  { start: 0x6fe8, end: 0x6fe9, idx:  5650 },
-  { start: 0x6ff0, end: 0x700d, idx:  5652 },
-  { start: 0x7017, end: 0x7017, idx:  5682 },
-  { start: 0x7020, end: 0x7023, idx:  5683 },
-  { start: 0x702f, end: 0x703c, idx:  5687 },
-  { start: 0x7043, end: 0x7055, idx:  5701 },
-  { start: 0x705d, end: 0x7065, idx:  5720 },
-  { start: 0x706c, end: 0x706e, idx:  5729 },
-  { start: 0x7075, end: 0x7076, idx:  5732 },
-  { start: 0x707e, end: 0x7086, idx:  5734 },
-  { start: 0x7094, end: 0x709b, idx:  5743 },
-  { start: 0x70a4, end: 0x70a4, idx:  5751 },
-  { start: 0x70ab, end: 0x70b7, idx:  5752 },
-  { start: 0x70ca, end: 0x70ca, idx:  5765 },
-  { start: 0x70d1, end: 0x70dc, idx:  5766 },
-  { start: 0x70e4, end: 0x70e4, idx:  5778 },
-  { start: 0x70fa, end: 0x70fa, idx:  5779 },
-  { start: 0x7103, end: 0x710f, idx:  5780 },
-  { start: 0x711e, end: 0x7120, idx:  5793 },
-  { start: 0x712b, end: 0x7131, idx:  5796 },
-  { start: 0x7138, end: 0x7138, idx:  5803 },
-  { start: 0x7141, end: 0x7160, idx:  5804 },
-  { start: 0x7168, end: 0x7168, idx:  5836 },
-  { start: 0x7179, end: 0x7179, idx:  5837 },
-  { start: 0x7180, end: 0x7192, idx:  5838 },
-  { start: 0x719a, end: 0x71a2, idx:  5857 },
-  { start: 0x71af, end: 0x71b3, idx:  5866 },
-  { start: 0x71ba, end: 0x71c4, idx:  5871 },
-  { start: 0x71cb, end: 0x71cc, idx:  5882 },
-  { start: 0x71d3, end: 0x71dc, idx:  5884 },
-  { start: 0x71f8, end: 0x7200, idx:  5894 },
-  { start: 0x7207, end: 0x7209, idx:  5903 },
-  { start: 0x7213, end: 0x7224, idx:  5906 },
-  { start: 0x722b, end: 0x7239, idx:  5924 },
-  { start: 0x7241, end: 0x7245, idx:  5939 },
-  { start: 0x724e, end: 0x7293, idx:  5944 },
-  { start: 0x729b, end: 0x729b, idx:  6014 },
-  { start: 0x72a8, end: 0x72b4, idx:  6015 },
-  { start: 0x72be, end: 0x72cc, idx:  6028 },
-  { start: 0x72d5, end: 0x72d8, idx:  6043 },
-  { start: 0x72df, end: 0x72e5, idx:  6047 },
-  { start: 0x72f3, end: 0x7343, idx:  6054 },
-  { start: 0x734d, end: 0x7386, idx:  6135 },
-  { start: 0x738e, end: 0x73ad, idx:  6193 },
-  { start: 0x73b5, end: 0x73e9, idx:  6225 },
-  { start: 0x73f4, end: 0x740a, idx:  6278 },
-  { start: 0x7411, end: 0x7411, idx:  6301 },
-  { start: 0x741a, end: 0x741b, idx:  6302 },
-  { start: 0x7424, end: 0x7431, idx:  6304 },
-  { start: 0x7439, end: 0x7439, idx:  6318 },
-  { start: 0x7440, end: 0x7472, idx:  6319 },
-  { start: 0x7480, end: 0x74bf, idx:  6370 },
-  { start: 0x74c8, end: 0x74ff, idx:  6434 },
-  { start: 0x7506, end: 0x7506, idx:  6490 },
-  { start: 0x7512, end: 0x7517, idx:  6491 },
-  { start: 0x7520, end: 0x752f, idx:  6497 },
-  { start: 0x7536, end: 0x7557, idx:  6513 },
-  { start: 0x755e, end: 0x7561, idx:  6547 },
-  { start: 0x756f, end: 0x7571, idx:  6551 },
-  { start: 0x7579, end: 0x7585, idx:  6554 },
-  { start: 0x7590, end: 0x75a4, idx:  6567 },
-  { start: 0x75b4, end: 0x75cf, idx:  6588 },
-  { start: 0x75d7, end: 0x75f1, idx:  6616 },
-  { start: 0x75f9, end: 0x75f9, idx:  6643 },
-  { start: 0x7600, end: 0x764b, idx:  6644 },
-  { start: 0x7655, end: 0x7665, idx:  6720 },
-  { start: 0x766d, end: 0x7674, idx:  6737 },
-  { start: 0x7681, end: 0x7685, idx:  6745 },
-  { start: 0x768c, end: 0x768d, idx:  6750 },
-  { start: 0x7695, end: 0x76ad, idx:  6752 },
-  { start: 0x76bd, end: 0x76d9, idx:  6777 },
-  { start: 0x76e0, end: 0x7784, idx:  6806 },
-  { start: 0x778c, end: 0x778d, idx:  6971 },
-  { start: 0x7794, end: 0x77b5, idx:  6973 },
-  { start: 0x77be, end: 0x77c9, idx:  7007 },
-  { start: 0x77d1, end: 0x77fb, idx:  7019 },
-  { start: 0x7805, end: 0x7811, idx:  7062 },
-  { start: 0x781d, end: 0x7823, idx:  7075 },
-  { start: 0x782d, end: 0x7837, idx:  7082 },
-  { start: 0x7843, end: 0x7852, idx:  7093 },
-  { start: 0x785c, end: 0x786e, idx:  7109 },
-  { start: 0x787a, end: 0x787e, idx:  7128 },
-  { start: 0x788a, end: 0x78b3, idx:  7133 },
-  { start: 0x78bb, end: 0x78bf, idx:  7175 },
-  { start: 0x78c7, end: 0x78ea, idx:  7180 },
-  { start: 0x78f2, end: 0x7910, idx:  7216 },
-  { start: 0x791a, end: 0x795c, idx:  7247 },
-  { start: 0x7967, end: 0x796b, idx:  7314 },
-  { start: 0x7972, end: 0x7972, idx:  7319 },
-  { start: 0x7979, end: 0x797e, idx:  7320 },
-  { start: 0x798b, end: 0x79a1, idx:  7326 },
-  { start: 0x79a8, end: 0x79bb, idx:  7349 },
-  { start: 0x79c2, end: 0x79f1, idx:  7369 },
-  { start: 0x79f8, end: 0x7a3a, idx:  7417 },
-  { start: 0x7a44, end: 0x7a4c, idx:  7484 },
-  { start: 0x7a55, end: 0x7a6d, idx:  7493 },
-  { start: 0x7a75, end: 0x7a94, idx:  7518 },
-  { start: 0x7a9e, end: 0x7aa3, idx:  7550 },
-  { start: 0x7aac, end: 0x7aac, idx:  7556 },
-  { start: 0x7ab3, end: 0x7abc, idx:  7557 },
-  { start: 0x7ac6, end: 0x7ad1, idx:  7567 },
-  { start: 0x7adb, end: 0x7adb, idx:  7579 },
-  { start: 0x7ae8, end: 0x7af4, idx:  7580 },
-  { start: 0x7afb, end: 0x7afe, idx:  7593 },
-  { start: 0x7b07, end: 0x7b07, idx:  7597 },
-  { start: 0x7b14, end: 0x7b14, idx:  7598 },
-  { start: 0x7b1f, end: 0x7b34, idx:  7599 },
-  { start: 0x7b3d, end: 0x7b47, idx:  7621 },
-  { start: 0x7b4e, end: 0x7b4e, idx:  7632 },
-  { start: 0x7b55, end: 0x7b55, idx:  7633 },
-  { start: 0x7b60, end: 0x7b77, idx:  7634 },
-  { start: 0x7b84, end: 0x7ba5, idx:  7658 },
-  { start: 0x7bac, end: 0x7bca, idx:  7692 },
-  { start: 0x7bd4, end: 0x7bdb, idx:  7723 },
-  { start: 0x7be8, end: 0x7bea, idx:  7731 },
-  { start: 0x7bf2, end: 0x7c0f, idx:  7734 },
-  { start: 0x7c19, end: 0x7c3a, idx:  7764 },
-  { start: 0x7c46, end: 0x7c4a, idx:  7798 },
-  { start: 0x7c51, end: 0x7c72, idx:  7803 },
-  { start: 0x7c79, end: 0x7c7d, idx:  7837 },
-  { start: 0x7c86, end: 0x7c87, idx:  7842 },
-  { start: 0x7c8f, end: 0x7c94, idx:  7844 },
-  { start: 0x7c9e, end: 0x7ca6, idx:  7850 },
-  { start: 0x7cb0, end: 0x7cdd, idx:  7859 },
-  { start: 0x7ce6, end: 0x7ceb, idx:  7905 },
-  { start: 0x7cf5, end: 0x7cf5, idx:  7911 },
-  { start: 0x7d03, end: 0x7d16, idx:  7912 },
-  { start: 0x7d1d, end: 0x7d31, idx:  7932 },
-  { start: 0x7d3c, end: 0x7d5d, idx:  7953 },
-  { start: 0x7d65, end: 0x7d70, idx:  7987 },
-  { start: 0x7d78, end: 0x7d9e, idx:  7999 },
-  { start: 0x7da6, end: 0x7daa, idx:  8038 },
-  { start: 0x7db3, end: 0x7db9, idx:  8043 },
-  { start: 0x7dc2, end: 0x7dce, idx:  8050 },
-  { start: 0x7dd7, end: 0x7dd9, idx:  8063 },
-  { start: 0x7de2, end: 0x7e00, idx:  8066 },
-  { start: 0x7e08, end: 0x7e08, idx:  8097 },
-  { start: 0x7e10, end: 0x7e20, idx:  8098 },
-  { start: 0x7e27, end: 0x7e36, idx:  8115 },
-  { start: 0x7e3f, end: 0x7e47, idx:  8131 },
-  { start: 0x7e4e, end: 0x7e58, idx:  8140 },
-  { start: 0x7e5f, end: 0x7e9e, idx:  8151 },
-  { start: 0x7f3b, end: 0x7f47, idx:  8215 },
-  { start: 0x7f4f, end: 0x7f53, idx:  8228 },
-  { start: 0x7f5b, end: 0x7f66, idx:  8233 },
-  { start: 0x7f6d, end: 0x7f71, idx:  8245 },
-  { start: 0x7f7d, end: 0x7f80, idx:  8250 },
-  { start: 0x7f8b, end: 0x7fad, idx:  8254 },
-  { start: 0x7fb4, end: 0x7fb4, idx:  8289 },
-  { start: 0x7fbc, end: 0x7fcf, idx:  8290 },
-  { start: 0x7fdb, end: 0x7ff2, idx:  8310 },
-  { start: 0x7ffa, end: 0x7fff, idx:  8334 },
-  { start: 0x8007, end: 0x8016, idx:  8340 },
-  { start: 0x801d, end: 0x8044, idx:  8356 },
-  { start: 0x8060, end: 0x8066, idx:  8396 },
-  { start: 0x806d, end: 0x8075, idx:  8403 },
-  { start: 0x8081, end: 0x8081, idx:  8412 },
-  { start: 0x8088, end: 0x808e, idx:  8413 },
-  { start: 0x809c, end: 0x809e, idx:  8420 },
-  { start: 0x80a6, end: 0x80ab, idx:  8423 },
-  { start: 0x80b8, end: 0x80b9, idx:  8429 },
-  { start: 0x80c8, end: 0x80d8, idx:  8431 },
-  { start: 0x80e0, end: 0x80e0, idx:  8448 },
-  { start: 0x80ed, end: 0x8103, idx:  8449 },
-  { start: 0x810b, end: 0x810b, idx:  8472 },
-  { start: 0x8116, end: 0x813c, idx:  8473 },
-  { start: 0x8145, end: 0x8157, idx:  8512 },
-  { start: 0x8160, end: 0x816f, idx:  8531 },
-  { start: 0x8177, end: 0x8177, idx:  8547 },
-  { start: 0x8181, end: 0x81a2, idx:  8548 },
-  { start: 0x81ae, end: 0x81b4, idx:  8582 },
-  { start: 0x81bb, end: 0x81bb, idx:  8589 },
-  { start: 0x81c3, end: 0x81e4, idx:  8590 },
-  { start: 0x81eb, end: 0x8203, idx:  8624 },
-  { start: 0x820f, end: 0x8228, idx:  8649 },
-  { start: 0x8232, end: 0x823a, idx:  8675 },
-  { start: 0x8243, end: 0x826d, idx:  8684 },
-  { start: 0x8274, end: 0x8274, idx:  8727 },
-  { start: 0x827b, end: 0x82bf, idx:  8728 },
-  { start: 0x82c6, end: 0x82c6, idx:  8797 },
-  { start: 0x82d0, end: 0x82ef, idx:  8798 },
-  { start: 0x82f6, end: 0x830b, idx:  8830 },
-  { start: 0x831b, end: 0x8322, idx:  8852 },
-  { start: 0x832c, end: 0x8357, idx:  8860 },
-  { start: 0x8370, end: 0x8370, idx:  8904 },
-  { start: 0x8378, end: 0x8386, idx:  8905 },
-  { start: 0x838d, end: 0x839d, idx:  8920 },
-  { start: 0x83a6, end: 0x83ad, idx:  8937 },
-  { start: 0x83be, end: 0x83c0, idx:  8945 },
-  { start: 0x83c7, end: 0x83d4, idx:  8948 },
-  { start: 0x83dd, end: 0x83dd, idx:  8962 },
-  { start: 0x83e8, end: 0x83ea, idx:  8963 },
-  { start: 0x83f6, end: 0x8419, idx:  8966 },
-  { start: 0x842f, end: 0x842f, idx:  9002 },
-  { start: 0x8439, end: 0x8439, idx:  9003 },
-  { start: 0x8445, end: 0x8485, idx:  9004 },
-  { start: 0x8492, end: 0x8495, idx:  9069 },
-  { start: 0x849e, end: 0x849e, idx:  9073 },
-  { start: 0x84a6, end: 0x84d3, idx:  9074 },
-  { start: 0x84dc, end: 0x84dc, idx:  9120 },
-  { start: 0x84e7, end: 0x8510, idx:  9121 },
-  { start: 0x851c, end: 0x8536, idx:  9163 },
-  { start: 0x853f, end: 0x853f, idx:  9190 },
-  { start: 0x8546, end: 0x8546, idx:  9191 },
-  { start: 0x854f, end: 0x8564, idx:  9192 },
-  { start: 0x856b, end: 0x856f, idx:  9214 },
-  { start: 0x8579, end: 0x85ad, idx:  9219 },
-  { start: 0x85b4, end: 0x85ce, idx:  9272 },
-  { start: 0x85d8, end: 0x8605, idx:  9299 },
-  { start: 0x860d, end: 0x8629, idx:  9345 },
-  { start: 0x8636, end: 0x8646, idx:  9374 },
-  { start: 0x8652, end: 0x867a, idx:  9391 },
-  { start: 0x8688, end: 0x86c5, idx:  9432 },
-  { start: 0x86d1, end: 0x86e7, idx:  9494 },
-  { start: 0x86fa, end: 0x86fd, idx:  9517 },
-  { start: 0x8704, end: 0x8732, idx:  9521 },
-  { start: 0x8739, end: 0x8745, idx:  9568 },
-  { start: 0x874d, end: 0x874d, idx:  9581 },
-  { start: 0x8758, end: 0x8765, idx:  9582 },
-  { start: 0x876f, end: 0x8772, idx:  9596 },
-  { start: 0x877b, end: 0x877b, idx:  9600 },
-  { start: 0x8783, end: 0x87b5, idx:  9601 },
-  { start: 0x87be, end: 0x87c1, idx:  9652 },
-  { start: 0x87c8, end: 0x87ce, idx:  9656 },
-  { start: 0x87d5, end: 0x881f, idx:  9663 },
-  { start: 0x8828, end: 0x8869, idx:  9738 },
-  { start: 0x8871, end: 0x8871, idx:  9804 },
-  { start: 0x8879, end: 0x8880, idx:  9805 },
-  { start: 0x8898, end: 0x88a0, idx:  9813 },
-  { start: 0x88a8, end: 0x88aa, idx:  9822 },
-  { start: 0x88ba, end: 0x88c0, idx:  9825 },
-  { start: 0x88ca, end: 0x88d3, idx:  9832 },
-  { start: 0x88db, end: 0x88de, idx:  9842 },
-  { start: 0x88e7, end: 0x88e7, idx:  9846 },
-  { start: 0x88ef, end: 0x88f7, idx:  9847 },
-  { start: 0x8901, end: 0x8906, idx:  9856 },
-  { start: 0x890d, end: 0x8928, idx:  9862 },
-  { start: 0x8930, end: 0x8963, idx:  9890 },
-  { start: 0x896b, end: 0x897d, idx:  9942 },
-  { start: 0x8989, end: 0x89a5, idx:  9961 },
-  { start: 0x89b0, end: 0x89bc, idx:  9990 },
-  { start: 0x89d4, end: 0x89d8, idx: 10003 },
-  { start: 0x89e5, end: 0x8a07, idx: 10008 },
-  { start: 0x8a0f, end: 0x8a15, idx: 10043 },
-  { start: 0x8a1e, end: 0x8a67, idx: 10050 },
-  { start: 0x8a75, end: 0x8a9f, idx: 10124 },
-  { start: 0x8aa7, end: 0x8aca, idx: 10167 },
-  { start: 0x8ad1, end: 0x8adf, idx: 10203 },
-  { start: 0x8aec, end: 0x8b11, idx: 10218 },
-  { start: 0x8b1c, end: 0x8b1f, idx: 10256 },
-  { start: 0x8b2d, end: 0x8b30, idx: 10260 },
-  { start: 0x8b37, end: 0x8b63, idx: 10264 },
-  { start: 0x8b6d, end: 0x8b6d, idx: 10309 },
-  { start: 0x8b76, end: 0x8b95, idx: 10310 },
-  { start: 0x8b9c, end: 0x8b9f, idx: 10342 },
-  { start: 0x8c38, end: 0x8c3e, idx: 10346 },
-  { start: 0x8c45, end: 0x8c7e, idx: 10353 },
-  { start: 0x8c86, end: 0x8c9c, idx: 10411 },
-  { start: 0x8ca4, end: 0x8ca4, idx: 10434 },
-  { start: 0x8cb9, end: 0x8cba, idx: 10435 },
-  { start: 0x8cc5, end: 0x8ce1, idx: 10437 },
-  { start: 0x8ce8, end: 0x8d09, idx: 10466 },
-  { start: 0x8d12, end: 0x8d1b, idx: 10500 },
-  { start: 0x8d65, end: 0x8d6e, idx: 10510 },
-  { start: 0x8d7f, end: 0x8d95, idx: 10520 },
-  { start: 0x8d9e, end: 0x8dd9, idx: 10543 },
-  { start: 0x8de4, end: 0x8df4, idx: 10603 },
-  { start: 0x8dfd, end: 0x8e16, idx: 10620 },
-  { start: 0x8e20, end: 0x8e27, idx: 10646 },
-  { start: 0x8e31, end: 0x8e41, idx: 10654 },
-  { start: 0x8e4b, end: 0x8e54, idx: 10671 },
-  { start: 0x8e5b, end: 0x8e62, idx: 10681 },
-  { start: 0x8e69, end: 0x8e71, idx: 10689 },
-  { start: 0x8e79, end: 0x8e7b, idx: 10698 },
-  { start: 0x8e82, end: 0x8e89, idx: 10701 },
-  { start: 0x8e90, end: 0x8ec7, idx: 10709 },
-  { start: 0x8ecf, end: 0x8ed4, idx: 10765 },
-  { start: 0x8edc, end: 0x8edc, idx: 10771 },
-  { start: 0x8ee8, end: 0x8f08, idx: 10772 },
-  { start: 0x8f0f, end: 0x8f47, idx: 10805 },
-  { start: 0x8f4f, end: 0x8f5e, idx: 10862 },
-  { start: 0x8f65, end: 0x8f65, idx: 10878 },
-  { start: 0x8f9d, end: 0x8fa6, idx: 10879 },
-  { start: 0x8fb5, end: 0x8fd5, idx: 10889 },
-  { start: 0x8fe0, end: 0x900c, idx: 10922 },
-  { start: 0x9018, end: 0x901b, idx: 10967 },
-  { start: 0x9028, end: 0x9037, idx: 10971 },
-  { start: 0x903f, end: 0x9044, idx: 10987 },
-  { start: 0x904c, end: 0x904c, idx: 10993 },
-  { start: 0x905b, end: 0x9079, idx: 10994 },
-  { start: 0x9085, end: 0x90a5, idx: 11025 },
-  { start: 0x90b0, end: 0x90b6, idx: 11058 },
-  { start: 0x90bd, end: 0x90f6, idx: 11065 },
-  { start: 0x90fe, end: 0x9148, idx: 11123 },
-  { start: 0x914f, end: 0x916d, idx: 11198 },
-  { start: 0x9174, end: 0x91c5, idx: 11229 },
-  { start: 0x91d3, end: 0x9251, idx: 11311 },
-  { start: 0x9258, end: 0x927f, idx: 11438 },
-  { start: 0x9288, end: 0x92f0, idx: 11478 },
-  { start: 0x92f9, end: 0x9315, idx: 11583 },
-  { start: 0x931c, end: 0x932a, idx: 11612 },
-  { start: 0x9333, end: 0x9337, idx: 11627 },
-  { start: 0x9347, end: 0x9349, idx: 11632 },
-  { start: 0x9350, end: 0x93ab, idx: 11635 },
-  { start: 0x93b4, end: 0x93ba, idx: 11727 },
-  { start: 0x93c1, end: 0x93e7, idx: 11734 },
-  { start: 0x93f7, end: 0x9417, idx: 11773 },
-  { start: 0x941f, end: 0x941f, idx: 11806 },
-  { start: 0x942e, end: 0x9434, idx: 11807 },
-  { start: 0x943b, end: 0x944c, idx: 11814 },
-  { start: 0x9455, end: 0x9472, idx: 11832 },
-  { start: 0x9483, end: 0x9484, idx: 11862 },
-  { start: 0x9578, end: 0x958e, idx: 11864 },
-  { start: 0x959d, end: 0x95ac, idx: 11887 },
-  { start: 0x95b4, end: 0x95bf, idx: 11903 },
-  { start: 0x95c6, end: 0x95e6, idx: 11915 },
-  { start: 0x961d, end: 0x9641, idx: 11948 },
-  { start: 0x9652, end: 0x9658, idx: 11985 },
-  { start: 0x9661, end: 0x9661, idx: 11992 },
-  { start: 0x966e, end: 0x9674, idx: 11993 },
-  { start: 0x967b, end: 0x9689, idx: 12000 },
-  { start: 0x9691, end: 0x96b3, idx: 12015 },
-  { start: 0x96ba, end: 0x96ba, idx: 12050 },
-  { start: 0x96ca, end: 0x96ca, idx: 12051 },
-  { start: 0x96d2, end: 0x96df, idx: 12052 },
-  { start: 0x96e9, end: 0x96f1, idx: 12066 },
-  { start: 0x96fa, end: 0x96fa, idx: 12075 },
-  { start: 0x9702, end: 0x9709, idx: 12076 },
-  { start: 0x971a, end: 0x9728, idx: 12084 },
-  { start: 0x9731, end: 0x9733, idx: 12099 },
-  { start: 0x9741, end: 0x9743, idx: 12102 },
-  { start: 0x974a, end: 0x975b, idx: 12105 },
-  { start: 0x9763, end: 0x9780, idx: 12123 },
-  { start: 0x9789, end: 0x9789, idx: 12153 },
-  { start: 0x9795, end: 0x97a2, idx: 12154 },
-  { start: 0x97ac, end: 0x97e4, idx: 12168 },
-  { start: 0x97ef, end: 0x97fa, idx: 12225 },
-  { start: 0x9807, end: 0x9835, idx: 12237 },
-  { start: 0x983e, end: 0x984a, idx: 12284 },
-  { start: 0x9851, end: 0x985a, idx: 12297 },
-  { start: 0x9862, end: 0x986c, idx: 12307 },
-  { start: 0x98ab, end: 0x98cc, idx: 12318 },
-  { start: 0x98e1, end: 0x98ea, idx: 12352 },
-  { start: 0x98f3, end: 0x98f6, idx: 12362 },
-  { start: 0x9902, end: 0x9908, idx: 12366 },
-  { start: 0x9911, end: 0x9960, idx: 12373 },
-  { start: 0x999b, end: 0x999f, idx: 12453 },
-  { start: 0x99a6, end: 0x99a6, idx: 12458 },
-  { start: 0x99b0, end: 0x99c9, idx: 12459 },
-  { start: 0x99d3, end: 0x99de, idx: 12485 },
-  { start: 0x99e7, end: 0x9a04, idx: 12497 },
-  { start: 0x9a0b, end: 0x9a16, idx: 12527 },
-  { start: 0x9a1e, end: 0x9a38, idx: 12539 },
-  { start: 0x9a41, end: 0x9a56, idx: 12566 },
-  { start: 0x9a5d, end: 0x9a5d, idx: 12588 },
-  { start: 0x9aaa, end: 0x9b3d, idx: 12589 },
-  { start: 0x9b48, end: 0x9b4c, idx: 12737 },
-  { start: 0x9b55, end: 0x9b9e, idx: 12742 },
-  { start: 0x9ba6, end: 0x9bd0, idx: 12816 },
-  { start: 0x9bd7, end: 0x9c02, idx: 12859 },
-  { start: 0x9c0b, end: 0x9c2a, idx: 12903 },
-  { start: 0x9c31, end: 0x9c7b, idx: 12935 },
-  { start: 0x9ce6, end: 0x9ce6, idx: 13010 },
-  { start: 0x9cf2, end: 0x9cf9, idx: 13011 },
-  { start: 0x9d02, end: 0x9d02, idx: 13019 },
-  { start: 0x9d0b, end: 0x9d1e, idx: 13020 },
-  { start: 0x9d2f, end: 0x9d4a, idx: 13040 },
-  { start: 0x9d53, end: 0x9d54, idx: 13068 },
-  { start: 0x9d5f, end: 0x9d98, idx: 13070 },
-  { start: 0x9da1, end: 0x9da1, idx: 13128 },
-  { start: 0x9daa, end: 0x9dca, idx: 13129 },
-  { start: 0x9dd4, end: 0x9df4, idx: 13162 },
-  { start: 0x9dfe, end: 0x9e1d, idx: 13195 },
-  { start: 0x9e7a, end: 0x9e87, idx: 13227 },
-  { start: 0x9e8e, end: 0x9e8f, idx: 13241 },
-  { start: 0x9e96, end: 0x9eb5, idx: 13243 },
-  { start: 0x9ec6, end: 0x9ecb, idx: 13275 },
-  { start: 0x9ed5, end: 0x9ed5, idx: 13281 },
-  { start: 0x9edf, end: 0x9ef8, idx: 13282 },
-  { start: 0x9eff, end: 0x9f47, idx: 13308 },
-  { start: 0x9f53, end: 0x9f5e, idx: 13381 },
-  { start: 0x9f68, end: 0x9f7d, idx: 13393 },
-  { start: 0x9f8f, end: 0x9f97, idx: 13415 },
-  { start: 0x9f9e, end: 0x9fa5, idx: 13424 },
-  { start: 0xff5e, end: 0xff5e, idx: 13432 },
-  { start: 0xffff, end: 0xffff, idx:     0 }
-};
-
-/* The values corresponding to the table can be computed using
-
-    egrep '^0x[[:xdigit:]][[:xdigit:]][[:xdigit:]][[:xdigit:]]' \
-      .../eastasia/jis/jis0212.txt | awk '{ print $2, $1 }' |
-    sort -u | perl tab.pl
-
-   where tab.pl contains:
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $first=$last=$idx=0;
-
-   sub fmt {
-     printf ("\n ") if (($n % 6) == 0);
-     ++$n;
-     my($val) = pop(@_);
-     printf (" \"\\x%02x\\x%02x\",",
-	     $val < 256 ? $val : int($val / 256),
-	     $val < 256 ? 0 : $val % 256);
-   }
-
-   while (<>) {
-     local($ucs,$jis,%rest) = split;
-     local($u)=hex($ucs);
-     local($j)=hex($jis);
-     if ($u - $last > 6) {
-       if ($last != 0) {
-	 $idx += $last - $first + 1;
-       }
-       $first=$u;
-     } else {
-       for ($m = $last + 1; $m < $u; ++$m) {
-	 fmt (0);
-       }
-     }
-     fmt ($j);
-     $last=$u;
-   }
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-const char __jisx0212_from_ucs[][2] =
-{
-  "\x22\x37", "\x22\x42", "\x00\x00", "\x00\x00", "\x22\x70", "\x00\x00",
-  "\x22\x43", "\x00\x00", "\x00\x00", "\x22\x6d", "\x22\x6c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x22\x6e", "\x22\x34", "\x22\x31", "\x00\x00",
-  "\x22\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x22\x44",
-  "\x2a\x22", "\x2a\x21", "\x2a\x24", "\x2a\x2a", "\x2a\x23", "\x2a\x29",
-  "\x29\x21", "\x2a\x2e", "\x2a\x32", "\x2a\x31", "\x2a\x34", "\x2a\x33",
-  "\x2a\x40", "\x2a\x3f", "\x2a\x42", "\x2a\x41", "\x00\x00", "\x2a\x50",
-  "\x2a\x52", "\x2a\x51", "\x2a\x54", "\x2a\x58", "\x2a\x53", "\x00\x00",
-  "\x29\x2c", "\x2a\x63", "\x2a\x62", "\x2a\x65", "\x2a\x64", "\x2a\x72",
-  "\x29\x30", "\x29\x4e", "\x2b\x22", "\x2b\x21", "\x2b\x24", "\x2b\x2a",
-  "\x2b\x23", "\x2b\x29", "\x29\x41", "\x2b\x2e", "\x2b\x32", "\x2b\x31",
-  "\x2b\x34", "\x2b\x33", "\x2b\x40", "\x2b\x3f", "\x2b\x42", "\x2b\x41",
-  "\x29\x43", "\x2b\x50", "\x2b\x52", "\x2b\x51", "\x2b\x54", "\x2b\x58",
-  "\x2b\x53", "\x00\x00", "\x29\x4c", "\x2b\x63", "\x2b\x62", "\x2b\x65",
-  "\x2b\x64", "\x2b\x72", "\x29\x50", "\x2b\x73", "\x2a\x27", "\x2b\x27",
-  "\x2a\x25", "\x2b\x25", "\x2a\x28", "\x2b\x28", "\x2a\x2b", "\x2b\x2b",
-  "\x2a\x2c", "\x2b\x2c", "\x2a\x2f", "\x2b\x2f", "\x2a\x2d", "\x2b\x2d",
-  "\x2a\x30", "\x2b\x30", "\x29\x22", "\x29\x42", "\x2a\x37", "\x2b\x37",
-  "\x00\x00", "\x00\x00", "\x2a\x36", "\x2b\x36", "\x2a\x38", "\x2b\x38",
-  "\x2a\x35", "\x2b\x35", "\x2a\x3a", "\x2b\x3a", "\x2a\x3b", "\x2b\x3b",
-  "\x2a\x3d", "\x2b\x3d", "\x2a\x3c", "\x00\x00", "\x2a\x3e", "\x2b\x3e",
-  "\x29\x24", "\x29\x44", "\x2a\x47", "\x2b\x47", "\x2a\x45", "\x2b\x45",
-  "\x00\x00", "\x00\x00", "\x2a\x46", "\x2b\x46", "\x2a\x44", "\x29\x45",
-  "\x29\x26", "\x29\x46", "\x2a\x48", "\x2b\x48", "\x2a\x49", "\x2b\x49",
-  "\x29\x47", "\x2a\x4a", "\x2b\x4a", "\x2a\x4c", "\x2b\x4c", "\x2a\x4b",
-  "\x2b\x4b", "\x29\x29", "\x29\x49", "\x29\x28", "\x29\x48", "\x2a\x4d",
-  "\x2b\x4d", "\x2a\x4f", "\x2b\x4f", "\x2a\x4e", "\x2b\x4e", "\x29\x4a",
-  "\x29\x2b", "\x29\x4b", "\x2a\x57", "\x2b\x57", "\x00\x00", "\x00\x00",
-  "\x2a\x56", "\x2b\x56", "\x29\x2d", "\x29\x4d", "\x2a\x59", "\x2b\x59",
-  "\x2a\x5b", "\x2b\x5b", "\x2a\x5a", "\x2b\x5a", "\x2a\x5c", "\x2b\x5c",
-  "\x2a\x5d", "\x2b\x5d", "\x2a\x5f", "\x2b\x5f", "\x2a\x5e", "\x2b\x5e",
-  "\x2a\x61", "\x2b\x61", "\x2a\x60", "\x2b\x60", "\x29\x2f", "\x29\x4f",
-  "\x2a\x6c", "\x2b\x6c", "\x2a\x69", "\x2b\x69", "\x2a\x66", "\x2b\x66",
-  "\x2a\x6b", "\x2b\x6b", "\x2a\x68", "\x2b\x68", "\x2a\x6a", "\x2b\x6a",
-  "\x2a\x71", "\x2b\x71", "\x2a\x74", "\x2b\x74", "\x2a\x73", "\x2a\x75",
-  "\x2b\x75", "\x2a\x77", "\x2b\x77", "\x2a\x76", "\x2b\x76", "\x2a\x26",
-  "\x2b\x26", "\x2a\x43", "\x2b\x43", "\x2a\x55", "\x2b\x55", "\x2a\x67",
-  "\x2b\x67", "\x2a\x70", "\x2b\x70", "\x2a\x6d", "\x2b\x6d", "\x2a\x6f",
-  "\x2b\x6f", "\x2a\x6e", "\x2b\x6e", "\x2b\x39", "\x22\x30", "\x22\x2f",
-  "\x22\x32", "\x22\x36", "\x22\x35", "\x00\x00", "\x22\x33", "\x22\x38",
-  "\x22\x39", "\x26\x61", "\x00\x00", "\x26\x62", "\x26\x63", "\x26\x64",
-  "\x00\x00", "\x26\x67", "\x00\x00", "\x26\x69", "\x26\x6c", "\x26\x76",
-  "\x26\x65", "\x26\x6a", "\x26\x71", "\x26\x72", "\x26\x73", "\x26\x74",
-  "\x26\x7b", "\x26\x78", "\x26\x75", "\x26\x7a", "\x26\x77", "\x26\x79",
-  "\x26\x7c", "\x27\x42", "\x27\x43", "\x27\x44", "\x27\x45", "\x27\x46",
-  "\x27\x47", "\x27\x48", "\x27\x49", "\x27\x4a", "\x27\x4b", "\x27\x4c",
-  "\x00\x00", "\x27\x4d", "\x27\x4e", "\x27\x72", "\x27\x73", "\x27\x74",
-  "\x27\x75", "\x27\x76", "\x27\x77", "\x27\x78", "\x27\x79", "\x27\x7a",
-  "\x27\x7b", "\x27\x7c", "\x00\x00", "\x27\x7d", "\x27\x7e", "\x22\x71",
-  "\x22\x6f", "\x30\x21", "\x00\x00", "\x30\x22", "\x30\x23", "\x30\x24",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x25",
-  "\x30\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x27", "\x30\x28",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x29", "\x00\x00", "\x00\x00",
-  "\x30\x2a", "\x00\x00", "\x00\x00", "\x30\x2b", "\x30\x2c", "\x30\x2d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x2e", "\x30\x2f",
-  "\x30\x30", "\x00\x00", "\x00\x00", "\x30\x31", "\x00\x00", "\x00\x00",
-  "\x30\x32", "\x30\x33", "\x30\x34", "\x00\x00", "\x30\x35", "\x30\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x37", "\x30\x38",
-  "\x30\x39", "\x30\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x3c",
-  "\x30\x3d", "\x30\x3e", "\x30\x3f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x30\x40", "\x30\x41", "\x30\x42", "\x30\x43",
-  "\x30\x44", "\x30\x45", "\x30\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x30\x47", "\x30\x48", "\x30\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x4a", "\x30\x4b", "\x00\x00",
-  "\x30\x4c", "\x00\x00", "\x30\x4d", "\x00\x00", "\x30\x4e", "\x30\x4f",
-  "\x30\x50", "\x30\x51", "\x30\x52", "\x00\x00", "\x30\x53", "\x30\x54",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x55", "\x00\x00",
-  "\x00\x00", "\x30\x56", "\x30\x57", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x30\x58", "\x00\x00", "\x00\x00", "\x30\x59",
-  "\x30\x5a", "\x30\x5b", "\x00\x00", "\x30\x5c", "\x30\x5d", "\x00\x00",
-  "\x00\x00", "\x30\x5e", "\x00\x00", "\x30\x60", "\x00\x00", "\x30\x61",
-  "\x00\x00", "\x30\x62", "\x00\x00", "\x30\x63", "\x00\x00", "\x30\x64",
-  "\x00\x00", "\x00\x00", "\x30\x65", "\x00\x00", "\x30\x66", "\x00\x00",
-  "\x30\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x30\x68", "\x30\x69", "\x00\x00", "\x30\x6a", "\x30\x6b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x6c", "\x00\x00",
-  "\x30\x6d", "\x00\x00", "\x30\x6e", "\x00\x00", "\x30\x6f", "\x30\x70",
-  "\x30\x5f", "\x00\x00", "\x00\x00", "\x30\x71", "\x30\x72", "\x00\x00",
-  "\x30\x73", "\x00\x00", "\x30\x74", "\x00\x00", "\x00\x00", "\x30\x75",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x30\x76",
-  "\x30\x77", "\x30\x78", "\x30\x79", "\x00\x00", "\x00\x00", "\x30\x7a",
-  "\x30\x7b", "\x00\x00", "\x00\x00", "\x30\x7c", "\x30\x7d", "\x00\x00",
-  "\x30\x7e", "\x31\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x22",
-  "\x31\x23", "\x00\x00", "\x31\x24", "\x00\x00", "\x31\x25", "\x00\x00",
-  "\x31\x26", "\x00\x00", "\x31\x27", "\x31\x28", "\x31\x29", "\x00\x00",
-  "\x00\x00", "\x31\x2a", "\x00\x00", "\x31\x2b", "\x31\x2c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x2d", "\x31\x2e", "\x31\x2f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x30", "\x00\x00", "\x31\x31",
-  "\x00\x00", "\x31\x32", "\x31\x33", "\x31\x34", "\x31\x35", "\x00\x00",
-  "\x31\x36", "\x31\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x38",
-  "\x31\x39", "\x00\x00", "\x31\x3a", "\x31\x3b", "\x00\x00", "\x31\x3c",
-  "\x31\x3d", "\x31\x3e", "\x00\x00", "\x31\x3f", "\x00\x00", "\x00\x00",
-  "\x31\x40", "\x31\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x42",
-  "\x00\x00", "\x31\x43", "\x31\x44", "\x00\x00", "\x31\x45", "\x31\x46",
-  "\x31\x47", "\x00\x00", "\x31\x48", "\x31\x49", "\x31\x4a", "\x00\x00",
-  "\x00\x00", "\x31\x4b", "\x00\x00", "\x00\x00", "\x31\x4c", "\x00\x00",
-  "\x00\x00", "\x31\x4d", "\x00\x00", "\x31\x4e", "\x00\x00", "\x31\x4f",
-  "\x00\x00", "\x31\x50", "\x00\x00", "\x00\x00", "\x31\x51", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x52", "\x31\x53", "\x00\x00", "\x00\x00",
-  "\x31\x54", "\x31\x55", "\x31\x56", "\x31\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x59", "\x31\x5a", "\x00\x00", "\x31\x5b", "\x00\x00", "\x31\x5c",
-  "\x31\x5d", "\x00\x00", "\x31\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x76", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x31\x5f", "\x31\x60", "\x31\x61", "\x00\x00", "\x00\x00",
-  "\x31\x62", "\x31\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x64",
-  "\x00\x00", "\x31\x65", "\x00\x00", "\x31\x66", "\x00\x00", "\x00\x00",
-  "\x31\x67", "\x31\x68", "\x31\x69", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x6a", "\x00\x00", "\x31\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x31\x6c", "\x31\x6d", "\x00\x00", "\x31\x6e",
-  "\x31\x6f", "\x00\x00", "\x00\x00", "\x31\x70", "\x31\x71", "\x00\x00",
-  "\x00\x00", "\x31\x72", "\x00\x00", "\x00\x00", "\x31\x73", "\x00\x00",
-  "\x00\x00", "\x31\x74", "\x31\x75", "\x31\x77", "\x00\x00", "\x31\x78",
-  "\x31\x79", "\x00\x00", "\x31\x7a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x31\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x31\x7c", "\x31\x7d",
-  "\x31\x7e", "\x00\x00", "\x32\x21", "\x32\x22", "\x32\x23", "\x00\x00",
-  "\x32\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x25",
-  "\x32\x26", "\x00\x00", "\x32\x27", "\x32\x28", "\x32\x29", "\x32\x2a",
-  "\x32\x2b", "\x32\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x32\x2d", "\x32\x2e", "\x32\x2f", "\x32\x30", "\x00\x00", "\x00\x00",
-  "\x32\x31", "\x00\x00", "\x00\x00", "\x32\x32", "\x00\x00", "\x00\x00",
-  "\x32\x33", "\x32\x34", "\x00\x00", "\x00\x00", "\x32\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x36", "\x00\x00", "\x32\x37",
-  "\x00\x00", "\x32\x38", "\x00\x00", "\x00\x00", "\x32\x39", "\x32\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x3b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x3c", "\x32\x3d", "\x00\x00", "\x32\x3e", "\x00\x00",
-  "\x00\x00", "\x32\x3f", "\x00\x00", "\x32\x40", "\x00\x00", "\x32\x41",
-  "\x00\x00", "\x32\x42", "\x32\x43", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x32\x44", "\x00\x00", "\x32\x45", "\x32\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x46", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x49", "\x00\x00",
-  "\x00\x00", "\x32\x4a", "\x32\x4b", "\x32\x4c", "\x00\x00", "\x00\x00",
-  "\x32\x4d", "\x32\x4e", "\x32\x4f", "\x32\x50", "\x00\x00", "\x32\x52",
-  "\x32\x53", "\x00\x00", "\x32\x54", "\x00\x00", "\x32\x55", "\x32\x56",
-  "\x32\x57", "\x32\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x32\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x5a", "\x32\x5b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x5c", "\x32\x5d", "\x00\x00",
-  "\x32\x5e", "\x00\x00", "\x32\x5f", "\x00\x00", "\x32\x60", "\x32\x61",
-  "\x32\x62", "\x00\x00", "\x00\x00", "\x32\x63", "\x32\x64", "\x32\x65",
-  "\x32\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x68", "\x00\x00", "\x32\x69",
-  "\x00\x00", "\x32\x6a", "\x32\x6b", "\x32\x6c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x32\x6d", "\x00\x00", "\x32\x6e", "\x32\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x70", "\x32\x71",
-  "\x32\x72", "\x00\x00", "\x00\x00", "\x32\x73", "\x32\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x32\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x32\x76", "\x00\x00", "\x32\x77", "\x32\x78", "\x32\x79",
-  "\x00\x00", "\x32\x7a", "\x00\x00", "\x32\x7b", "\x00\x00", "\x32\x7c",
-  "\x32\x7d", "\x00\x00", "\x00\x00", "\x32\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x21", "\x33\x22", "\x00\x00",
-  "\x33\x23", "\x33\x24", "\x33\x25", "\x00\x00", "\x33\x26", "\x00\x00",
-  "\x00\x00", "\x33\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x29",
-  "\x00\x00", "\x00\x00", "\x33\x2a", "\x33\x2b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x2c", "\x33\x2d", "\x33\x2e", "\x00\x00", "\x00\x00",
-  "\x33\x2f", "\x33\x30", "\x33\x31", "\x00\x00", "\x00\x00", "\x33\x32",
-  "\x33\x33", "\x33\x34", "\x00\x00", "\x33\x35", "\x33\x36", "\x00\x00",
-  "\x33\x37", "\x33\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x39", "\x33\x3a", "\x33\x3b", "\x00\x00", "\x00\x00",
-  "\x33\x3c", "\x33\x3d", "\x33\x3e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x3f", "\x33\x40", "\x00\x00", "\x33\x41", "\x33\x42", "\x00\x00",
-  "\x33\x43", "\x00\x00", "\x33\x44", "\x00\x00", "\x00\x00", "\x33\x45",
-  "\x33\x46", "\x33\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x33\x48", "\x33\x49", "\x33\x4a", "\x33\x4b", "\x33\x4c", "\x33\x4d",
-  "\x00\x00", "\x33\x4e", "\x00\x00", "\x00\x00", "\x33\x4f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x50", "\x00\x00", "\x33\x51",
-  "\x33\x52", "\x00\x00", "\x33\x53", "\x33\x54", "\x33\x55", "\x33\x56",
-  "\x00\x00", "\x33\x57", "\x00\x00", "\x33\x58", "\x33\x59", "\x33\x5a",
-  "\x33\x5b", "\x33\x5c", "\x33\x5d", "\x33\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x5f", "\x33\x60", "\x33\x61",
-  "\x00\x00", "\x33\x62", "\x33\x63", "\x00\x00", "\x33\x64", "\x00\x00",
-  "\x00\x00", "\x33\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x66",
-  "\x00\x00", "\x33\x67", "\x00\x00", "\x33\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x69", "\x00\x00", "\x00\x00", "\x33\x6a", "\x00\x00",
-  "\x33\x6b", "\x00\x00", "\x00\x00", "\x33\x6c", "\x00\x00", "\x33\x6d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x6e", "\x33\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x33\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x33\x71", "\x00\x00", "\x00\x00", "\x33\x72",
-  "\x33\x73", "\x33\x74", "\x00\x00", "\x33\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x33\x76", "\x33\x77", "\x00\x00", "\x00\x00", "\x33\x78",
-  "\x00\x00", "\x33\x79", "\x33\x7a", "\x33\x7b", "\x00\x00", "\x00\x00",
-  "\x33\x7c", "\x33\x7d", "\x33\x7e", "\x34\x21", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x22", "\x00\x00", "\x34\x23", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x24", "\x00\x00", "\x00\x00",
-  "\x34\x25", "\x34\x26", "\x00\x00", "\x34\x27", "\x34\x28", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x29", "\x00\x00",
-  "\x34\x2a", "\x34\x2b", "\x34\x2c", "\x00\x00", "\x34\x2d", "\x34\x2e",
-  "\x34\x2f", "\x00\x00", "\x00\x00", "\x34\x30", "\x00\x00", "\x34\x31",
-  "\x00\x00", "\x00\x00", "\x34\x32", "\x34\x33", "\x34\x34", "\x34\x35",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x36", "\x34\x38", "\x34\x37",
-  "\x34\x39", "\x00\x00", "\x34\x3a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x3b", "\x00\x00", "\x34\x3c", "\x00\x00",
-  "\x34\x3d", "\x34\x3e", "\x34\x3f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x34\x40", "\x34\x41", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x34\x42", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x44", "\x34\x45",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x47", "\x34\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x49", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x4b", "\x00\x00", "\x00\x00", "\x34\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x34\x4d", "\x34\x4e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x4f", "\x00\x00", "\x00\x00", "\x34\x50",
-  "\x00\x00", "\x34\x51", "\x34\x52", "\x00\x00", "\x34\x53", "\x34\x54",
-  "\x00\x00", "\x34\x55", "\x00\x00", "\x00\x00", "\x34\x56", "\x00\x00",
-  "\x00\x00", "\x34\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x58", "\x34\x59", "\x00\x00", "\x00\x00", "\x34\x5a", "\x34\x5b",
-  "\x00\x00", "\x34\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x5d", "\x00\x00", "\x00\x00", "\x34\x5e", "\x34\x5f", "\x00\x00",
-  "\x34\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x61", "\x34\x62", "\x34\x63", "\x34\x64", "\x34\x65", "\x34\x66",
-  "\x34\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x34\x68", "\x34\x69", "\x00\x00", "\x34\x6a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x6b", "\x00\x00", "\x34\x6c", "\x00\x00",
-  "\x00\x00", "\x34\x6d", "\x34\x6e", "\x34\x6f", "\x34\x70", "\x00\x00",
-  "\x00\x00", "\x34\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x34\x72", "\x00\x00", "\x34\x73", "\x34\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x75", "\x00\x00", "\x34\x76", "\x00\x00",
-  "\x34\x77", "\x34\x78", "\x00\x00", "\x34\x79", "\x00\x00", "\x34\x7a",
-  "\x00\x00", "\x34\x7b", "\x34\x7c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x34\x7d", "\x34\x7e", "\x00\x00", "\x35\x21",
-  "\x00\x00", "\x35\x22", "\x00\x00", "\x35\x23", "\x00\x00", "\x00\x00",
-  "\x35\x24", "\x35\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x26",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x28", "\x35\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x35\x2a", "\x00\x00", "\x00\x00", "\x35\x2b",
-  "\x00\x00", "\x35\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x2d", "\x35\x2e", "\x00\x00", "\x35\x2f", "\x35\x30", "\x00\x00",
-  "\x00\x00", "\x35\x31", "\x35\x32", "\x00\x00", "\x00\x00", "\x35\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x34",
-  "\x00\x00", "\x35\x35", "\x35\x36", "\x35\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x38", "\x35\x39", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x3a", "\x00\x00", "\x00\x00", "\x35\x3b", "\x35\x3c", "\x35\x3d",
-  "\x35\x3e", "\x00\x00", "\x35\x3f", "\x00\x00", "\x00\x00", "\x35\x40",
-  "\x35\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x42", "\x00\x00", "\x35\x43", "\x35\x44", "\x35\x45", "\x35\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x47", "\x00\x00", "\x00\x00",
-  "\x35\x48", "\x35\x49", "\x00\x00", "\x00\x00", "\x35\x4a", "\x35\x4b",
-  "\x35\x4c", "\x35\x4d", "\x35\x4e", "\x35\x4f", "\x35\x50", "\x00\x00",
-  "\x00\x00", "\x35\x51", "\x35\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x53", "\x35\x54", "\x35\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x35\x57", "\x00\x00", "\x35\x58", "\x35\x59", "\x00\x00",
-  "\x00\x00", "\x35\x5a", "\x00\x00", "\x00\x00", "\x35\x5b", "\x35\x5c",
-  "\x35\x5d", "\x00\x00", "\x35\x5e", "\x35\x5f", "\x00\x00", "\x00\x00",
-  "\x35\x60", "\x00\x00", "\x35\x61", "\x35\x62", "\x00\x00", "\x00\x00",
-  "\x35\x63", "\x00\x00", "\x35\x64", "\x35\x65", "\x00\x00", "\x35\x66",
-  "\x35\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x68", "\x00\x00",
-  "\x35\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x35\x6a", "\x35\x6b", "\x00\x00", "\x35\x6c", "\x35\x6d", "\x35\x6e",
-  "\x35\x6f", "\x00\x00", "\x00\x00", "\x35\x70", "\x35\x71", "\x35\x72",
-  "\x35\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x35\x74",
-  "\x35\x75", "\x00\x00", "\x35\x76", "\x00\x00", "\x35\x77", "\x00\x00",
-  "\x00\x00", "\x35\x78", "\x00\x00", "\x00\x00", "\x35\x79", "\x00\x00",
-  "\x35\x7a", "\x35\x7b", "\x00\x00", "\x35\x7c", "\x00\x00", "\x00\x00",
-  "\x35\x7d", "\x35\x7e", "\x36\x21", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x36\x22", "\x36\x23", "\x00\x00", "\x00\x00", "\x36\x24", "\x00\x00",
-  "\x00\x00", "\x36\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x26",
-  "\x36\x27", "\x36\x28", "\x36\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x36\x2a", "\x00\x00", "\x00\x00", "\x36\x2b",
-  "\x00\x00", "\x36\x2c", "\x00\x00", "\x00\x00", "\x36\x2d", "\x36\x2e",
-  "\x36\x2f", "\x36\x30", "\x36\x31", "\x36\x32", "\x36\x33", "\x36\x34",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x35", "\x00\x00", "\x00\x00",
-  "\x36\x36", "\x00\x00", "\x36\x37", "\x00\x00", "\x36\x38", "\x00\x00",
-  "\x36\x39", "\x00\x00", "\x36\x3a", "\x36\x3b", "\x36\x3c", "\x00\x00",
-  "\x36\x3d", "\x36\x3e", "\x36\x3f", "\x00\x00", "\x36\x40", "\x36\x41",
-  "\x00\x00", "\x36\x42", "\x00\x00", "\x00\x00", "\x36\x43", "\x00\x00",
-  "\x36\x44", "\x00\x00", "\x36\x45", "\x00\x00", "\x36\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x47", "\x36\x48", "\x00\x00",
-  "\x36\x49", "\x36\x4a", "\x36\x4b", "\x36\x4c", "\x00\x00", "\x00\x00",
-  "\x36\x4d", "\x00\x00", "\x00\x00", "\x36\x4e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x36\x4f", "\x00\x00", "\x36\x50", "\x00\x00", "\x36\x51",
-  "\x36\x52", "\x00\x00", "\x00\x00", "\x36\x53", "\x36\x54", "\x36\x55",
-  "\x00\x00", "\x00\x00", "\x36\x56", "\x00\x00", "\x00\x00", "\x36\x57",
-  "\x36\x58", "\x36\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x5a",
-  "\x36\x5b", "\x00\x00", "\x00\x00", "\x36\x5c", "\x36\x5d", "\x36\x5e",
-  "\x36\x5f", "\x36\x60", "\x36\x61", "\x36\x62", "\x00\x00", "\x36\x63",
-  "\x36\x64", "\x36\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x66",
-  "\x00\x00", "\x36\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x68",
-  "\x36\x69", "\x36\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x36\x6b",
-  "\x36\x6c", "\x36\x6d", "\x36\x70", "\x36\x71", "\x00\x00", "\x36\x6e",
-  "\x36\x6f", "\x36\x72", "\x00\x00", "\x00\x00", "\x36\x73", "\x36\x74",
-  "\x00\x00", "\x36\x75", "\x00\x00", "\x36\x76", "\x00\x00", "\x00\x00",
-  "\x36\x77", "\x36\x78", "\x36\x79", "\x36\x7a", "\x36\x7b", "\x00\x00",
-  "\x00\x00", "\x36\x7d", "\x00\x00", "\x36\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x36\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x21", "\x37\x22", "\x37\x23", "\x37\x24", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x25", "\x00\x00", "\x00\x00", "\x37\x26",
-  "\x00\x00", "\x37\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x29", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x2a", "\x37\x2b", "\x00\x00",
-  "\x37\x2c", "\x00\x00", "\x00\x00", "\x37\x2d", "\x00\x00", "\x37\x2e",
-  "\x37\x2f", "\x37\x30", "\x37\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x32", "\x37\x33", "\x00\x00", "\x37\x34", "\x00\x00", "\x37\x35",
-  "\x37\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x37", "\x37\x38",
-  "\x37\x39", "\x37\x3a", "\x37\x3b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x3c", "\x37\x3d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x3e", "\x37\x3f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x40", "\x37\x41", "\x00\x00",
-  "\x00\x00", "\x37\x42", "\x00\x00", "\x37\x43", "\x37\x44", "\x00\x00",
-  "\x00\x00", "\x37\x45", "\x00\x00", "\x37\x46", "\x37\x47", "\x37\x48",
-  "\x37\x49", "\x37\x4a", "\x00\x00", "\x37\x4b", "\x37\x4c", "\x37\x4d",
-  "\x00\x00", "\x37\x4e", "\x00\x00", "\x37\x4f", "\x37\x50", "\x37\x51",
-  "\x37\x52", "\x00\x00", "\x37\x53", "\x00\x00", "\x00\x00", "\x37\x54",
-  "\x00\x00", "\x37\x55", "\x37\x56", "\x37\x57", "\x37\x60", "\x00\x00",
-  "\x37\x58", "\x00\x00", "\x37\x59", "\x37\x5a", "\x00\x00", "\x37\x5b",
-  "\x37\x5c", "\x37\x5d", "\x37\x5e", "\x00\x00", "\x37\x5f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x61", "\x37\x62",
-  "\x37\x63", "\x00\x00", "\x00\x00", "\x37\x64", "\x37\x65", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x66", "\x37\x67", "\x37\x68",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x69", "\x00\x00", "\x00\x00",
-  "\x37\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x37\x6b", "\x37\x6c", "\x37\x6d", "\x00\x00", "\x00\x00", "\x37\x7e",
-  "\x00\x00", "\x00\x00", "\x37\x6e", "\x00\x00", "\x37\x6f", "\x37\x70",
-  "\x00\x00", "\x37\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x72",
-  "\x00\x00", "\x00\x00", "\x37\x73", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x37\x74", "\x37\x75", "\x00\x00", "\x37\x76", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x77", "\x37\x78", "\x37\x79",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x37\x7a", "\x37\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x37\x7c", "\x37\x7d", "\x00\x00", "\x00\x00",
-  "\x38\x21", "\x38\x22", "\x38\x23", "\x00\x00", "\x00\x00", "\x38\x24",
-  "\x38\x25", "\x38\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x38\x27", "\x38\x28", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x38\x2a", "\x38\x2b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x2c", "\x38\x2d", "\x00\x00", "\x00\x00",
-  "\x38\x2e", "\x38\x2f", "\x00\x00", "\x38\x30", "\x38\x31", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x32", "\x38\x33", "\x00\x00",
-  "\x38\x34", "\x00\x00", "\x00\x00", "\x38\x35", "\x00\x00", "\x00\x00",
-  "\x38\x36", "\x38\x37", "\x38\x38", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x39", "\x00\x00", "\x00\x00", "\x38\x3a", "\x38\x3b", "\x38\x3c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x3d",
-  "\x38\x3e", "\x38\x3f", "\x38\x40", "\x00\x00", "\x38\x41", "\x38\x42",
-  "\x00\x00", "\x38\x43", "\x38\x44", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x45", "\x00\x00", "\x38\x46", "\x38\x47", "\x00\x00", "\x00\x00",
-  "\x38\x48", "\x38\x49", "\x38\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x4b", "\x00\x00", "\x00\x00", "\x38\x4c", "\x38\x4d", "\x38\x4e",
-  "\x38\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x51", "\x00\x00", "\x38\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x53",
-  "\x38\x54", "\x00\x00", "\x38\x55", "\x00\x00", "\x38\x56", "\x00\x00",
-  "\x38\x57", "\x00\x00", "\x38\x58", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x59", "\x00\x00", "\x00\x00", "\x38\x5a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x38\x5b", "\x38\x5c", "\x38\x5d", "\x38\x5e", "\x38\x5f",
-  "\x38\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x61",
-  "\x38\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x38\x63", "\x38\x64", "\x38\x65", "\x38\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x38\x68", "\x00\x00", "\x38\x69", "\x38\x6a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x6b", "\x38\x6c", "\x38\x6d", "\x00\x00",
-  "\x00\x00", "\x38\x6e", "\x00\x00", "\x38\x6f", "\x38\x70", "\x38\x71",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x38\x72", "\x00\x00", "\x00\x00",
-  "\x38\x73", "\x38\x74", "\x38\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x38\x76", "\x00\x00", "\x38\x77", "\x00\x00",
-  "\x38\x78", "\x38\x79", "\x38\x7a", "\x00\x00", "\x38\x7b", "\x00\x00",
-  "\x38\x7c", "\x38\x7d", "\x00\x00", "\x38\x7e", "\x00\x00", "\x39\x21",
-  "\x00\x00", "\x00\x00", "\x39\x22", "\x00\x00", "\x00\x00", "\x39\x23",
-  "\x39\x24", "\x00\x00", "\x00\x00", "\x39\x25", "\x00\x00", "\x39\x26",
-  "\x39\x27", "\x39\x28", "\x39\x29", "\x00\x00", "\x39\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x2b", "\x00\x00", "\x00\x00", "\x39\x2c",
-  "\x00\x00", "\x39\x2d", "\x39\x2e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x2f", "\x00\x00", "\x00\x00", "\x39\x30", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x31", "\x39\x32",
-  "\x39\x33", "\x39\x34", "\x00\x00", "\x00\x00", "\x39\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x36", "\x00\x00", "\x00\x00", "\x39\x37",
-  "\x00\x00", "\x39\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x39\x39", "\x00\x00", "\x39\x3a", "\x39\x3b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x3c", "\x00\x00", "\x39\x3d", "\x00\x00", "\x00\x00",
-  "\x39\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x3f",
-  "\x39\x40", "\x39\x41", "\x39\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x39\x43", "\x39\x44", "\x00\x00", "\x00\x00", "\x39\x45", "\x39\x46",
-  "\x39\x47", "\x00\x00", "\x39\x48", "\x39\x49", "\x00\x00", "\x39\x4a",
-  "\x00\x00", "\x00\x00", "\x39\x4b", "\x39\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x4d", "\x39\x4e", "\x39\x4f", "\x39\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x51", "\x39\x52", "\x39\x53", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x54", "\x39\x55", "\x00\x00",
-  "\x00\x00", "\x39\x56", "\x39\x57", "\x00\x00", "\x39\x58", "\x00\x00",
-  "\x00\x00", "\x39\x59", "\x00\x00", "\x00\x00", "\x39\x5a", "\x39\x5b",
-  "\x39\x5c", "\x00\x00", "\x39\x5d", "\x39\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x61", "\x39\x62",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x63", "\x00\x00",
-  "\x39\x64", "\x00\x00", "\x39\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x66", "\x39\x67", "\x00\x00", "\x00\x00",
-  "\x39\x68", "\x39\x69", "\x00\x00", "\x00\x00", "\x39\x6a", "\x39\x6b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x6c", "\x00\x00",
-  "\x00\x00", "\x39\x6d", "\x00\x00", "\x00\x00", "\x39\x6e", "\x00\x00",
-  "\x00\x00", "\x39\x6f", "\x00\x00", "\x00\x00", "\x39\x70", "\x00\x00",
-  "\x39\x71", "\x39\x72", "\x39\x73", "\x00\x00", "\x39\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x39\x76", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x39\x77", "\x39\x78", "\x39\x79", "\x00\x00", "\x39\x7a",
-  "\x00\x00", "\x00\x00", "\x39\x7b", "\x00\x00", "\x39\x7c", "\x39\x7d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x39\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x21", "\x00\x00", "\x3a\x22", "\x00\x00",
-  "\x3a\x23", "\x3a\x24", "\x3a\x25", "\x00\x00", "\x3a\x26", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x27", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3a\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x2a", "\x3a\x2b",
-  "\x3a\x2c", "\x3a\x2d", "\x00\x00", "\x00\x00", "\x3a\x2e", "\x3a\x2f",
-  "\x3a\x30", "\x3a\x31", "\x00\x00", "\x3a\x33", "\x00\x00", "\x3a\x34",
-  "\x00\x00", "\x3a\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x37", "\x3a\x38", "\x3a\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x39", "\x3a\x3a", "\x3a\x3b",
-  "\x3a\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x3e", "\x3a\x3f",
-  "\x3a\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3a\x41", "\x3a\x42", "\x3a\x43", "\x3a\x44", "\x3a\x45", "\x3a\x46",
-  "\x00\x00", "\x3a\x47", "\x00\x00", "\x00\x00", "\x3a\x48", "\x00\x00",
-  "\x3a\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x4b", "\x00\x00", "\x3a\x4c", "\x3a\x4d",
-  "\x00\x00", "\x3a\x4e", "\x3a\x4f", "\x00\x00", "\x3a\x50", "\x3a\x51",
-  "\x3a\x52", "\x00\x00", "\x00\x00", "\x3a\x53", "\x3a\x54", "\x00\x00",
-  "\x3a\x55", "\x00\x00", "\x3a\x56", "\x3a\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x58", "\x00\x00", "\x00\x00", "\x3a\x59",
-  "\x00\x00", "\x3a\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x5b",
-  "\x3a\x5c", "\x3a\x5d", "\x00\x00", "\x3a\x5e", "\x3a\x5f", "\x3a\x60",
-  "\x3a\x61", "\x3a\x62", "\x3a\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3a\x64", "\x3a\x65", "\x00\x00", "\x3a\x66",
-  "\x00\x00", "\x00\x00", "\x3a\x67", "\x3a\x68", "\x3a\x69", "\x3a\x6a",
-  "\x3a\x6b", "\x3a\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x6d",
-  "\x00\x00", "\x00\x00", "\x3a\x6e", "\x00\x00", "\x00\x00", "\x3a\x6f",
-  "\x00\x00", "\x3a\x70", "\x3a\x71", "\x00\x00", "\x3a\x72", "\x00\x00",
-  "\x3a\x73", "\x00\x00", "\x3a\x74", "\x00\x00", "\x00\x00", "\x3a\x75",
-  "\x3a\x76", "\x3a\x77", "\x3a\x78", "\x00\x00", "\x3a\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x7a", "\x3a\x7b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3a\x7c", "\x3a\x7d", "\x3a\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x21", "\x00\x00", "\x00\x00",
-  "\x3b\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x23", "\x3b\x24",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x25", "\x3b\x26",
-  "\x3b\x27", "\x3b\x28", "\x3b\x29", "\x3b\x2a", "\x00\x00", "\x3b\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x2c", "\x00\x00",
-  "\x00\x00", "\x3b\x2d", "\x3b\x2e", "\x00\x00", "\x3b\x2f", "\x3b\x30",
-  "\x00\x00", "\x3b\x31", "\x3b\x32", "\x00\x00", "\x00\x00", "\x3b\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x34", "\x3b\x35", "\x00\x00",
-  "\x3b\x36", "\x3b\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x38", "\x3b\x39", "\x00\x00", "\x3b\x3a", "\x3b\x3b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x3d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x3c", "\x3b\x3e", "\x00\x00",
-  "\x00\x00", "\x3b\x3f", "\x3b\x40", "\x00\x00", "\x3b\x41", "\x3b\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x43", "\x3b\x44",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x45", "\x3b\x47",
-  "\x3b\x48", "\x00\x00", "\x3b\x49", "\x3b\x4a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x4b", "\x00\x00", "\x00\x00", "\x3b\x4c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x4d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x4e", "\x00\x00", "\x3b\x4f", "\x00\x00", "\x00\x00",
-  "\x3b\x50", "\x3b\x51", "\x00\x00", "\x00\x00", "\x3b\x52", "\x00\x00",
-  "\x3b\x53", "\x00\x00", "\x3b\x57", "\x3b\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x58",
-  "\x3b\x59", "\x3b\x5a", "\x3b\x5b", "\x00\x00", "\x3b\x5c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x5d", "\x00\x00",
-  "\x00\x00", "\x3b\x5e", "\x00\x00", "\x00\x00", "\x3b\x5f", "\x3b\x60",
-  "\x3b\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x62", "\x3b\x63",
-  "\x00\x00", "\x3b\x64", "\x00\x00", "\x3b\x65", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3b\x66", "\x00\x00", "\x3b\x67", "\x3b\x68",
-  "\x3b\x69", "\x3b\x6a", "\x3b\x6b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x6c", "\x00\x00", "\x3b\x6d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x6e", "\x3b\x6f", "\x3b\x70", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3b\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x72",
-  "\x00\x00", "\x66\x74", "\x00\x00", "\x3b\x73", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x74", "\x3b\x75", "\x3b\x76", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3b\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x78",
-  "\x00\x00", "\x00\x00", "\x3b\x7a", "\x00\x00", "\x3b\x79", "\x3b\x7b",
-  "\x3b\x7c", "\x3b\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x3b\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x21", "\x3c\x22",
-  "\x3c\x23", "\x3c\x24", "\x3c\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3c\x27", "\x00\x00", "\x3c\x28", "\x3c\x29", "\x00\x00",
-  "\x00\x00", "\x3c\x2a", "\x3c\x2b", "\x3c\x2c", "\x3c\x2e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x2d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x2f", "\x00\x00", "\x00\x00", "\x3c\x30",
-  "\x3c\x31", "\x3c\x34", "\x00\x00", "\x3c\x32", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x33", "\x3c\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x36", "\x00\x00", "\x3c\x37", "\x00\x00",
-  "\x00\x00", "\x3c\x38", "\x3c\x39", "\x00\x00", "\x3c\x3a", "\x3c\x3b",
-  "\x00\x00", "\x3c\x3c", "\x3c\x3d", "\x3c\x3e", "\x3c\x3f", "\x3c\x40",
-  "\x00\x00", "\x3c\x41", "\x3c\x42", "\x3c\x43", "\x00\x00", "\x00\x00",
-  "\x3c\x44", "\x3c\x45", "\x00\x00", "\x3c\x46", "\x3c\x47", "\x00\x00",
-  "\x00\x00", "\x3c\x48", "\x00\x00", "\x3c\x49", "\x00\x00", "\x3c\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x4b", "\x00\x00",
-  "\x3c\x4c", "\x3c\x4d", "\x3c\x4e", "\x3c\x4f", "\x3c\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x52", "\x3c\x51", "\x00\x00",
-  "\x3c\x53", "\x00\x00", "\x00\x00", "\x3c\x54", "\x3c\x55", "\x00\x00",
-  "\x3c\x56", "\x3c\x57", "\x3c\x58", "\x00\x00", "\x3c\x59", "\x3c\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x5b",
-  "\x3c\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x5d", "\x3c\x5e",
-  "\x3c\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3c\x60", "\x3c\x61", "\x00\x00", "\x00\x00", "\x3c\x62", "\x3c\x63",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x64", "\x3c\x65", "\x3c\x66",
-  "\x3c\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x68", "\x00\x00",
-  "\x00\x00", "\x3c\x69", "\x3c\x6a", "\x00\x00", "\x3c\x6b", "\x00\x00",
-  "\x3c\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x6d", "\x00\x00",
-  "\x3c\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x6f",
-  "\x00\x00", "\x3c\x70", "\x00\x00", "\x3c\x71", "\x3c\x72", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3c\x73", "\x3c\x74", "\x00\x00", "\x3c\x75",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x76",
-  "\x00\x00", "\x00\x00", "\x3c\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3c\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x3c\x79", "\x00\x00",
-  "\x00\x00", "\x3c\x7a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3c\x7b", "\x00\x00", "\x00\x00", "\x3c\x7c", "\x3c\x7d", "\x00\x00",
-  "\x00\x00", "\x3c\x7e", "\x3d\x21", "\x00\x00", "\x00\x00", "\x3d\x22",
-  "\x00\x00", "\x3d\x23", "\x3d\x24", "\x00\x00", "\x00\x00", "\x3d\x25",
-  "\x00\x00", "\x3d\x26", "\x00\x00", "\x00\x00", "\x3d\x27", "\x3d\x28",
-  "\x3d\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x2a", "\x00\x00",
-  "\x3d\x2b", "\x3d\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3d\x2d", "\x3d\x2e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3d\x2f", "\x00\x00", "\x3d\x32", "\x00\x00", "\x00\x00",
-  "\x3d\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x31", "\x3d\x33",
-  "\x00\x00", "\x00\x00", "\x3d\x34", "\x3d\x35", "\x3d\x36", "\x3d\x37",
-  "\x3d\x38", "\x00\x00", "\x00\x00", "\x3d\x39", "\x3d\x3a", "\x3d\x3b",
-  "\x00\x00", "\x3d\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x3d", "\x3d\x3e", "\x3d\x3f", "\x3d\x40", "\x3d\x41", "\x3d\x42",
-  "\x00\x00", "\x00\x00", "\x3d\x43", "\x3d\x44", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x45", "\x3d\x46", "\x3d\x47",
-  "\x00\x00", "\x3d\x48", "\x3d\x49", "\x3d\x4a", "\x3d\x4b", "\x00\x00",
-  "\x00\x00", "\x3d\x4c", "\x3d\x4d", "\x00\x00", "\x00\x00", "\x3d\x4e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x4f", "\x00\x00", "\x3d\x50",
-  "\x3d\x51", "\x00\x00", "\x00\x00", "\x3d\x52", "\x00\x00", "\x00\x00",
-  "\x3d\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x54", "\x3d\x55", "\x00\x00", "\x00\x00", "\x3d\x56", "\x3d\x57",
-  "\x00\x00", "\x3d\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x5a",
-  "\x3d\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x5c", "\x00\x00", "\x3d\x5d", "\x3d\x5e", "\x3d\x5f", "\x3d\x60",
-  "\x3d\x61", "\x00\x00", "\x00\x00", "\x3d\x62", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x63", "\x00\x00", "\x00\x00", "\x3d\x64",
-  "\x00\x00", "\x3d\x65", "\x3d\x66", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x67", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x69", "\x3d\x6a", "\x3d\x6b", "\x3d\x6c", "\x00\x00", "\x00\x00",
-  "\x3d\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x6e", "\x00\x00",
-  "\x3d\x6f", "\x00\x00", "\x3d\x70", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3d\x71", "\x00\x00", "\x00\x00", "\x3d\x72", "\x00\x00", "\x3d\x73",
-  "\x00\x00", "\x3d\x74", "\x00\x00", "\x00\x00", "\x3d\x75", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x76", "\x3d\x77", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3d\x78", "\x00\x00", "\x3d\x79", "\x3d\x7a",
-  "\x00\x00", "\x00\x00", "\x3d\x7b", "\x3d\x7c", "\x3d\x7d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3d\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x21", "\x00\x00", "\x00\x00", "\x3e\x22",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x23", "\x00\x00", "\x3e\x24",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x25", "\x3e\x26", "\x3e\x27",
-  "\x3e\x28", "\x00\x00", "\x00\x00", "\x3e\x29", "\x3e\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x2b", "\x3e\x2c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x2d", "\x00\x00", "\x3e\x2e", "\x00\x00",
-  "\x3e\x2f", "\x3e\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x31",
-  "\x00\x00", "\x00\x00", "\x3e\x32", "\x3e\x33", "\x00\x00", "\x00\x00",
-  "\x3e\x34", "\x00\x00", "\x00\x00", "\x3e\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3e\x36", "\x3e\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3e\x38", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x39", "\x00\x00", "\x00\x00", "\x3e\x3a", "\x00\x00", "\x3e\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x3c", "\x3e\x3d", "\x3e\x3e",
-  "\x3e\x3f", "\x3e\x40", "\x00\x00", "\x3e\x41", "\x3e\x42", "\x00\x00",
-  "\x3e\x43", "\x00\x00", "\x00\x00", "\x3e\x44", "\x00\x00", "\x3e\x45",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x46", "\x3e\x47", "\x3e\x48",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x49", "\x3e\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x4b", "\x3e\x4c", "\x3e\x4d",
-  "\x00\x00", "\x3e\x4e", "\x3e\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3e\x50", "\x3e\x51", "\x00\x00", "\x00\x00", "\x3e\x52", "\x3e\x53",
-  "\x00\x00", "\x3e\x54", "\x3e\x55", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x56", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x57", "\x00\x00", "\x00\x00", "\x3e\x58",
-  "\x3e\x59", "\x00\x00", "\x00\x00", "\x3e\x5a", "\x3e\x5b", "\x3e\x5c",
-  "\x00\x00", "\x3e\x5d", "\x3e\x5e", "\x3e\x5f", "\x00\x00", "\x3e\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x61", "\x3e\x62",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x63", "\x3e\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x65", "\x3e\x66", "\x00\x00", "\x3e\x67",
-  "\x3e\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x69",
-  "\x00\x00", "\x00\x00", "\x3e\x6a", "\x00\x00", "\x3e\x6b", "\x00\x00",
-  "\x00\x00", "\x3e\x6c", "\x3e\x6d", "\x3e\x6e", "\x00\x00", "\x00\x00",
-  "\x3e\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x3e\x70", "\x3e\x71",
-  "\x3e\x72", "\x3e\x73", "\x3e\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3e\x75", "\x3e\x76", "\x3e\x77", "\x3e\x78",
-  "\x3e\x79", "\x00\x00", "\x3e\x7a", "\x3e\x7b", "\x00\x00", "\x00\x00",
-  "\x3e\x7e", "\x00\x00", "\x3e\x7c", "\x00\x00", "\x3e\x7d", "\x00\x00",
-  "\x00\x00", "\x3f\x21", "\x3f\x22", "\x00\x00", "\x3f\x23", "\x3f\x24",
-  "\x00\x00", "\x3f\x25", "\x3f\x26", "\x00\x00", "\x00\x00", "\x3f\x27",
-  "\x3f\x28", "\x00\x00", "\x3f\x29", "\x3f\x2a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3f\x2b", "\x00\x00", "\x3f\x2c", "\x3f\x2d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x2e", "\x00\x00", "\x3f\x2f", "\x00\x00",
-  "\x3f\x30", "\x3f\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x33", "\x3f\x34",
-  "\x3f\x35", "\x00\x00", "\x3f\x36", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x3f\x38", "\x3f\x39", "\x3f\x3a", "\x00\x00", "\x3f\x3b", "\x00\x00",
-  "\x3f\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x3d", "\x00\x00",
-  "\x3f\x3e", "\x3f\x3f", "\x3f\x40", "\x00\x00", "\x3f\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x42", "\x3f\x43", "\x00\x00", "\x00\x00",
-  "\x3f\x44", "\x3f\x45", "\x3f\x46", "\x3f\x47", "\x3f\x48", "\x3f\x49",
-  "\x00\x00", "\x3f\x4a", "\x3f\x4b", "\x00\x00", "\x00\x00", "\x3f\x4c",
-  "\x3f\x4d", "\x00\x00", "\x00\x00", "\x3f\x4e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3f\x4f", "\x3f\x50", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x3f\x51", "\x3f\x52", "\x3f\x53", "\x3f\x54", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x55", "\x3f\x56", "\x3f\x57", "\x00\x00",
-  "\x3f\x58", "\x3f\x59", "\x3f\x5a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x5b", "\x3f\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x5d", "\x3f\x5e", "\x00\x00",
-  "\x3f\x5f", "\x00\x00", "\x00\x00", "\x3f\x60", "\x00\x00", "\x00\x00",
-  "\x3f\x61", "\x00\x00", "\x00\x00", "\x3f\x62", "\x00\x00", "\x3f\x63",
-  "\x3f\x64", "\x3f\x65", "\x00\x00", "\x00\x00", "\x3f\x66", "\x3f\x67",
-  "\x3f\x68", "\x00\x00", "\x00\x00", "\x3f\x69", "\x00\x00", "\x00\x00",
-  "\x3f\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x6b",
-  "\x3f\x6c", "\x3f\x6d", "\x3f\x6e", "\x00\x00", "\x3f\x6f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x70", "\x3f\x71", "\x00\x00", "\x00\x00",
-  "\x3f\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x73", "\x3f\x74",
-  "\x3f\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x76", "\x00\x00",
-  "\x00\x00", "\x3f\x77", "\x3f\x78", "\x3f\x79", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x3f\x7a", "\x3f\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x3f\x7c", "\x00\x00", "\x00\x00", "\x3f\x7d",
-  "\x3f\x7e", "\x00\x00", "\x00\x00", "\x40\x21", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x22", "\x40\x23", "\x00\x00", "\x40\x24", "\x00\x00",
-  "\x00\x00", "\x40\x25", "\x00\x00", "\x40\x26", "\x00\x00", "\x00\x00",
-  "\x40\x27", "\x00\x00", "\x00\x00", "\x40\x28", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x29", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x2a", "\x40\x2b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x40\x2c", "\x40\x2d", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x2f",
-  "\x00\x00", "\x40\x30", "\x40\x31", "\x40\x32", "\x40\x33", "\x40\x34",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x36", "\x00\x00", "\x00\x00", "\x40\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x38", "\x00\x00",
-  "\x00\x00", "\x40\x39", "\x00\x00", "\x40\x3a", "\x40\x3b", "\x40\x3c",
-  "\x40\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x3e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x3f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x40", "\x00\x00", "\x40\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x42", "\x40\x43",
-  "\x00\x00", "\x40\x44", "\x00\x00", "\x00\x00", "\x40\x45", "\x40\x46",
-  "\x40\x47", "\x40\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x49", "\x00\x00", "\x40\x4a", "\x00\x00", "\x40\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x4d", "\x00\x00", "\x40\x4e",
-  "\x00\x00", "\x40\x4f", "\x00\x00", "\x40\x50", "\x40\x51", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x52", "\x40\x53", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x54", "\x40\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x56", "\x40\x57", "\x00\x00", "\x40\x58",
-  "\x40\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x5a", "\x00\x00",
-  "\x40\x5b", "\x40\x5c", "\x40\x5d", "\x40\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x40\x5f", "\x40\x60", "\x40\x61",
-  "\x40\x62", "\x00\x00", "\x40\x63", "\x40\x64", "\x40\x65", "\x00\x00",
-  "\x40\x66", "\x40\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x40\x68", "\x40\x69", "\x40\x6a", "\x00\x00", "\x40\x6b",
-  "\x40\x6c", "\x00\x00", "\x40\x6d", "\x40\x6e", "\x40\x6f", "\x40\x70",
-  "\x40\x71", "\x40\x72", "\x00\x00", "\x40\x73", "\x00\x00", "\x40\x74",
-  "\x00\x00", "\x40\x75", "\x00\x00", "\x40\x76", "\x00\x00", "\x40\x77",
-  "\x00\x00", "\x00\x00", "\x40\x78", "\x00\x00", "\x40\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x40\x7a", "\x40\x7b", "\x40\x7c", "\x40\x7d",
-  "\x40\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x22", "\x41\x23",
-  "\x41\x24", "\x41\x25", "\x00\x00", "\x41\x26", "\x00\x00", "\x41\x27",
-  "\x41\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x29", "\x00\x00",
-  "\x41\x2a", "\x41\x2b", "\x41\x2c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x2d", "\x41\x2e", "\x00\x00", "\x00\x00", "\x41\x2f", "\x00\x00",
-  "\x00\x00", "\x41\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x31", "\x00\x00", "\x41\x32", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x34", "\x00\x00",
-  "\x41\x35", "\x00\x00", "\x00\x00", "\x41\x36", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x37", "\x41\x38", "\x41\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x3a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x3b", "\x41\x3c", "\x00\x00", "\x41\x3d", "\x00\x00", "\x00\x00",
-  "\x41\x3e", "\x00\x00", "\x41\x3f", "\x00\x00", "\x00\x00", "\x41\x40",
-  "\x41\x41", "\x00\x00", "\x00\x00", "\x41\x42", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x43", "\x00\x00", "\x00\x00", "\x41\x44", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x45", "\x00\x00", "\x00\x00",
-  "\x41\x46", "\x41\x47", "\x00\x00", "\x41\x48", "\x41\x49", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x4b", "\x00\x00", "\x41\x4c", "\x41\x4d",
-  "\x00\x00", "\x41\x4e", "\x00\x00", "\x41\x4f", "\x41\x50", "\x41\x51",
-  "\x41\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x53", "\x41\x54",
-  "\x00\x00", "\x00\x00", "\x41\x55", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x41\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x58", "\x41\x59", "\x00\x00",
-  "\x00\x00", "\x41\x5a", "\x00\x00", "\x00\x00", "\x41\x5b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x5c", "\x00\x00", "\x00\x00",
-  "\x41\x5d", "\x00\x00", "\x00\x00", "\x41\x5e", "\x00\x00", "\x00\x00",
-  "\x41\x5f", "\x41\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x61",
-  "\x41\x62", "\x41\x63", "\x41\x64", "\x00\x00", "\x00\x00", "\x41\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x66",
-  "\x41\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x68",
-  "\x00\x00", "\x41\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x6a",
-  "\x00\x00", "\x41\x6b", "\x00\x00", "\x41\x6c", "\x41\x6d", "\x41\x6e",
-  "\x00\x00", "\x41\x6f", "\x00\x00", "\x41\x70", "\x41\x71", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x72", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x73", "\x41\x74", "\x41\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x41\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x77",
-  "\x41\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x41\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x41\x7a", "\x41\x7b", "\x00\x00", "\x00\x00",
-  "\x41\x7c", "\x41\x7d", "\x41\x7e", "\x42\x21", "\x00\x00", "\x00\x00",
-  "\x42\x22", "\x42\x23", "\x42\x24", "\x42\x25", "\x00\x00", "\x42\x26",
-  "\x00\x00", "\x00\x00", "\x42\x27", "\x42\x28", "\x42\x29", "\x42\x2a",
-  "\x00\x00", "\x42\x2b", "\x00\x00", "\x42\x2c", "\x42\x2d", "\x00\x00",
-  "\x42\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x30", "\x00\x00",
-  "\x42\x2f", "\x42\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x32", "\x42\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x34",
-  "\x00\x00", "\x42\x35", "\x00\x00", "\x42\x37", "\x00\x00", "\x00\x00",
-  "\x42\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x38", "\x42\x39", "\x42\x3a", "\x00\x00", "\x42\x3b", "\x42\x3c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x3d", "\x42\x3e", "\x42\x40",
-  "\x42\x41", "\x42\x42", "\x42\x44", "\x00\x00", "\x42\x45", "\x00\x00",
-  "\x42\x47", "\x42\x48", "\x42\x49", "\x00\x00", "\x42\x4a", "\x42\x4c",
-  "\x00\x00", "\x42\x43", "\x42\x46", "\x42\x4b", "\x42\x4d", "\x42\x4e",
-  "\x42\x4f", "\x00\x00", "\x00\x00", "\x42\x50", "\x00\x00", "\x42\x51",
-  "\x42\x52", "\x42\x53", "\x42\x54", "\x42\x55", "\x00\x00", "\x00\x00",
-  "\x42\x56", "\x42\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x58",
-  "\x42\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x5a", "\x42\x5b",
-  "\x00\x00", "\x00\x00", "\x42\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x42\x5e", "\x42\x5f", "\x00\x00", "\x42\x60", "\x42\x61", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x62", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x42\x63", "\x00\x00", "\x42\x64", "\x42\x65", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x66", "\x42\x67", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x68", "\x42\x69", "\x00\x00", "\x00\x00",
-  "\x42\x6a", "\x42\x6b", "\x00\x00", "\x42\x6c", "\x42\x6d", "\x42\x3f",
-  "\x42\x6e", "\x00\x00", "\x42\x6f", "\x42\x70", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x71", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x42\x72", "\x00\x00", "\x00\x00", "\x42\x73",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x74", "\x00\x00", "\x42\x75",
-  "\x42\x76", "\x42\x77", "\x42\x78", "\x00\x00", "\x42\x79", "\x42\x7a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x42\x7b", "\x42\x7c", "\x42\x7d",
-  "\x42\x7e", "\x43\x21", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x22", "\x00\x00", "\x43\x23", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x24", "\x00\x00", "\x43\x25",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x26", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x27", "\x00\x00",
-  "\x00\x00", "\x43\x28", "\x43\x29", "\x43\x2a", "\x00\x00", "\x43\x2b",
-  "\x00\x00", "\x43\x2c", "\x00\x00", "\x00\x00", "\x43\x2d", "\x00\x00",
-  "\x43\x2e", "\x43\x2f", "\x00\x00", "\x43\x30", "\x43\x31", "\x43\x32",
-  "\x43\x33", "\x00\x00", "\x00\x00", "\x43\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x35", "\x43\x36", "\x43\x37",
-  "\x00\x00", "\x00\x00", "\x43\x39", "\x00\x00", "\x43\x3a", "\x43\x3b",
-  "\x00\x00", "\x43\x3c", "\x00\x00", "\x00\x00", "\x43\x3d", "\x43\x3e",
-  "\x43\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x40",
-  "\x00\x00", "\x43\x41", "\x00\x00", "\x00\x00", "\x43\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x43\x44", "\x43\x45", "\x00\x00", "\x43\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x47", "\x43\x48", "\x00\x00",
-  "\x43\x38", "\x43\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x4b", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x4c", "\x00\x00",
-  "\x43\x4d", "\x43\x4f", "\x43\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x50", "\x43\x51", "\x00\x00", "\x43\x52", "\x43\x53", "\x43\x54",
-  "\x00\x00", "\x43\x55", "\x43\x56", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x58",
-  "\x43\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x5a",
-  "\x00\x00", "\x43\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x49", "\x00\x00", "\x00\x00", "\x43\x5c", "\x00\x00",
-  "\x43\x5d", "\x43\x5e", "\x00\x00", "\x00\x00", "\x43\x5f", "\x43\x60",
-  "\x00\x00", "\x00\x00", "\x43\x61", "\x43\x62", "\x43\x63", "\x43\x64",
-  "\x43\x65", "\x00\x00", "\x00\x00", "\x43\x66", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x43\x67", "\x43\x68", "\x43\x69", "\x43\x6a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x6b", "\x00\x00",
-  "\x43\x6c", "\x00\x00", "\x43\x6d", "\x00\x00", "\x43\x6e", "\x43\x6f",
-  "\x00\x00", "\x43\x70", "\x00\x00", "\x43\x71", "\x00\x00", "\x43\x72",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x73", "\x00\x00",
-  "\x43\x74", "\x00\x00", "\x43\x75", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x76", "\x43\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x43\x79", "\x43\x7a", "\x43\x7b",
-  "\x00\x00", "\x00\x00", "\x43\x7c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x43\x7d", "\x00\x00", "\x00\x00", "\x43\x7e", "\x44\x21", "\x44\x22",
-  "\x00\x00", "\x44\x23", "\x00\x00", "\x00\x00", "\x44\x24", "\x00\x00",
-  "\x00\x00", "\x44\x25", "\x00\x00", "\x00\x00", "\x44\x26", "\x44\x27",
-  "\x44\x28", "\x00\x00", "\x00\x00", "\x44\x29", "\x00\x00", "\x44\x2a",
-  "\x44\x2b", "\x44\x2c", "\x44\x2d", "\x00\x00", "\x00\x00", "\x44\x2e",
-  "\x44\x2f", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x30", "\x44\x31",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x32", "\x44\x33",
-  "\x44\x34", "\x44\x35", "\x00\x00", "\x00\x00", "\x44\x36", "\x44\x37",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x38",
-  "\x44\x39", "\x00\x00", "\x44\x3a", "\x00\x00", "\x00\x00", "\x44\x3b",
-  "\x44\x3c", "\x44\x3d", "\x00\x00", "\x44\x3e", "\x00\x00", "\x44\x3f",
-  "\x00\x00", "\x00\x00", "\x44\x40", "\x00\x00", "\x00\x00", "\x44\x41",
-  "\x44\x42", "\x00\x00", "\x00\x00", "\x44\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x44\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x45", "\x44\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x47",
-  "\x44\x48", "\x44\x49", "\x44\x4a", "\x44\x4b", "\x00\x00", "\x44\x4c",
-  "\x44\x4d", "\x00\x00", "\x00\x00", "\x44\x4e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x44\x4f", "\x44\x50", "\x44\x51", "\x44\x52", "\x44\x53",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x54", "\x44\x55", "\x44\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x44\x58", "\x00\x00", "\x44\x59", "\x44\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x5b", "\x44\x5c", "\x00\x00",
-  "\x44\x5d", "\x00\x00", "\x00\x00", "\x44\x5e", "\x00\x00", "\x44\x5f",
-  "\x00\x00", "\x44\x60", "\x44\x61", "\x44\x62", "\x00\x00", "\x44\x63",
-  "\x00\x00", "\x44\x64", "\x44\x65", "\x00\x00", "\x00\x00", "\x44\x66",
-  "\x44\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x68",
-  "\x44\x69", "\x44\x6a", "\x00\x00", "\x00\x00", "\x44\x6b", "\x44\x6c",
-  "\x44\x6d", "\x00\x00", "\x44\x6e", "\x00\x00", "\x44\x6f", "\x00\x00",
-  "\x44\x70", "\x44\x71", "\x00\x00", "\x44\x72", "\x44\x73", "\x00\x00",
-  "\x44\x74", "\x44\x75", "\x00\x00", "\x44\x76", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x44\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x44\x78", "\x00\x00", "\x00\x00", "\x44\x79", "\x00\x00", "\x00\x00",
-  "\x44\x7a", "\x00\x00", "\x00\x00", "\x00\x00", "\x44\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x44\x7c", "\x44\x7d", "\x00\x00", "\x44\x7e",
-  "\x00\x00", "\x45\x21", "\x00\x00", "\x00\x00", "\x45\x22", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x23", "\x00\x00", "\x00\x00", "\x45\x24",
-  "\x45\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x26", "\x45\x27", "\x00\x00", "\x00\x00", "\x45\x28", "\x45\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x2a", "\x00\x00", "\x45\x2b",
-  "\x45\x2c", "\x45\x2d", "\x00\x00", "\x00\x00", "\x45\x2e", "\x45\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x30", "\x45\x31",
-  "\x00\x00", "\x00\x00", "\x45\x32", "\x00\x00", "\x00\x00", "\x45\x33",
-  "\x45\x34", "\x00\x00", "\x45\x35", "\x45\x36", "\x00\x00", "\x00\x00",
-  "\x45\x37", "\x00\x00", "\x45\x38", "\x00\x00", "\x00\x00", "\x45\x39",
-  "\x45\x3a", "\x00\x00", "\x45\x3b", "\x00\x00", "\x45\x3c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x3d", "\x45\x3e",
-  "\x00\x00", "\x45\x3f", "\x45\x40", "\x45\x41", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x42", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x45\x44", "\x45\x45", "\x45\x46", "\x00\x00", "\x00\x00",
-  "\x45\x47", "\x45\x48", "\x45\x49", "\x45\x4a", "\x45\x4b", "\x00\x00",
-  "\x45\x4d", "\x45\x4c", "\x00\x00", "\x00\x00", "\x45\x4e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x50", "\x45\x51", "\x45\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x53", "\x45\x54", "\x45\x55", "\x00\x00",
-  "\x00\x00", "\x45\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x45\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x58", "\x45\x59",
-  "\x45\x5a", "\x45\x5b", "\x45\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x45\x5d", "\x45\x5e", "\x00\x00", "\x00\x00", "\x45\x5f",
-  "\x45\x60", "\x00\x00", "\x45\x61", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x62", "\x45\x63", "\x45\x64", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x65", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x66", "\x00\x00", "\x00\x00", "\x45\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x68",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x69", "\x00\x00", "\x00\x00",
-  "\x45\x6a", "\x45\x6b", "\x00\x00", "\x00\x00", "\x45\x6c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x6d", "\x45\x6e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x6f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x70", "\x45\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x45\x72", "\x00\x00", "\x00\x00", "\x45\x73", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x74", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x45\x75", "\x00\x00", "\x45\x76", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x77", "\x00\x00", "\x00\x00", "\x45\x78",
-  "\x45\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x45\x7a", "\x00\x00",
-  "\x00\x00", "\x45\x7b", "\x00\x00", "\x45\x7c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x45\x7d", "\x45\x7e", "\x46\x21", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x22", "\x00\x00", "\x00\x00", "\x46\x23",
-  "\x46\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x25", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x26", "\x46\x27", "\x00\x00", "\x46\x28",
-  "\x46\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x2a",
-  "\x46\x2b", "\x00\x00", "\x00\x00", "\x46\x2c", "\x46\x2d", "\x46\x2e",
-  "\x00\x00", "\x46\x2f", "\x46\x30", "\x46\x31", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x32", "\x46\x33", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x34", "\x46\x35", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x36", "\x00\x00", "\x00\x00", "\x46\x37", "\x46\x38",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x39", "\x46\x3a", "\x00\x00",
-  "\x46\x3b", "\x00\x00", "\x00\x00", "\x46\x3c", "\x46\x3d", "\x46\x3e",
-  "\x00\x00", "\x00\x00", "\x46\x3f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x40", "\x00\x00", "\x46\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x42", "\x00\x00",
-  "\x00\x00", "\x46\x43", "\x00\x00", "\x46\x44", "\x46\x45", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x46\x47", "\x46\x48", "\x00\x00", "\x46\x49", "\x00\x00", "\x46\x4a",
-  "\x46\x4b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x46\x4c", "\x46\x4d", "\x46\x4e", "\x46\x4f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x46\x50", "\x00\x00", "\x46\x51", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x52", "\x00\x00", "\x46\x53", "\x46\x54",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x55", "\x46\x56", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x57", "\x46\x58", "\x46\x59", "\x00\x00",
-  "\x46\x5a", "\x00\x00", "\x46\x5b", "\x00\x00", "\x00\x00", "\x46\x5c",
-  "\x00\x00", "\x46\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x46\x5e", "\x00\x00", "\x46\x5f", "\x46\x60", "\x47\x36", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x61", "\x00\x00", "\x46\x62", "\x00\x00",
-  "\x46\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x64",
-  "\x00\x00", "\x46\x65", "\x00\x00", "\x46\x66", "\x46\x67", "\x00\x00",
-  "\x46\x68", "\x46\x69", "\x46\x6a", "\x46\x6b", "\x00\x00", "\x46\x6c",
-  "\x46\x6d", "\x46\x6e", "\x00\x00", "\x46\x6f", "\x46\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x46\x71", "\x00\x00", "\x00\x00", "\x46\x72",
-  "\x46\x73", "\x00\x00", "\x46\x74", "\x00\x00", "\x46\x75", "\x46\x76",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x46\x77", "\x46\x78", "\x00\x00",
-  "\x46\x79", "\x46\x7a", "\x46\x7b", "\x46\x7c", "\x00\x00", "\x46\x7d",
-  "\x00\x00", "\x46\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x21",
-  "\x00\x00", "\x47\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x23",
-  "\x47\x24", "\x00\x00", "\x47\x25", "\x00\x00", "\x47\x26", "\x47\x27",
-  "\x00\x00", "\x47\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x29",
-  "\x00\x00", "\x47\x2a", "\x47\x2b", "\x00\x00", "\x00\x00", "\x47\x2c",
-  "\x00\x00", "\x00\x00", "\x47\x2d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x2e", "\x47\x2f", "\x00\x00", "\x47\x30", "\x00\x00", "\x47\x31",
-  "\x47\x32", "\x47\x33", "\x47\x34", "\x47\x35", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x37", "\x47\x38", "\x00\x00",
-  "\x47\x39", "\x47\x3a", "\x00\x00", "\x00\x00", "\x47\x3b", "\x00\x00",
-  "\x00\x00", "\x47\x3c", "\x47\x3d", "\x47\x3e", "\x47\x3f", "\x00\x00",
-  "\x47\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x41", "\x00\x00",
-  "\x47\x42", "\x47\x43", "\x47\x44", "\x47\x45", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x46", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x47", "\x47\x48", "\x47\x49", "\x00\x00",
-  "\x47\x4a", "\x00\x00", "\x47\x4b", "\x47\x4c", "\x47\x4d", "\x47\x4e",
-  "\x00\x00", "\x47\x4f", "\x47\x50", "\x00\x00", "\x00\x00", "\x47\x51",
-  "\x00\x00", "\x47\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x53",
-  "\x00\x00", "\x47\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x56", "\x00\x00",
-  "\x47\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x58", "\x47\x59",
-  "\x47\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x5b",
-  "\x00\x00", "\x47\x5c", "\x00\x00", "\x47\x5d", "\x47\x5e", "\x00\x00",
-  "\x47\x5f", "\x00\x00", "\x00\x00", "\x47\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x62", "\x47\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x64", "\x00\x00", "\x47\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x66", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x47\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x68", "\x47\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x47\x6a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x6b", "\x47\x6c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x6d", "\x00\x00", "\x00\x00", "\x47\x6e", "\x00\x00",
-  "\x47\x6f", "\x47\x70", "\x47\x71", "\x47\x72", "\x00\x00", "\x00\x00",
-  "\x47\x73", "\x47\x74", "\x00\x00", "\x47\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x47\x76", "\x00\x00", "\x47\x77", "\x47\x78", "\x47\x79",
-  "\x47\x7a", "\x00\x00", "\x00\x00", "\x47\x7b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x47\x7c", "\x47\x7d", "\x47\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x21", "\x48\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x23", "\x48\x24", "\x48\x25", "\x00\x00",
-  "\x48\x26", "\x48\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x48\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x48\x29", "\x48\x2a", "\x48\x2b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x2c", "\x48\x2d", "\x00\x00",
-  "\x00\x00", "\x48\x2e", "\x00\x00", "\x48\x2f", "\x48\x30", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x31", "\x48\x32", "\x48\x33", "\x00\x00",
-  "\x48\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x35", "\x48\x36",
-  "\x00\x00", "\x48\x37", "\x00\x00", "\x00\x00", "\x48\x38", "\x48\x39",
-  "\x48\x3a", "\x48\x3b", "\x00\x00", "\x48\x3c", "\x48\x3d", "\x48\x3e",
-  "\x00\x00", "\x48\x3f", "\x00\x00", "\x48\x40", "\x48\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x42", "\x00\x00", "\x48\x43", "\x00\x00",
-  "\x48\x44", "\x48\x45", "\x48\x46", "\x00\x00", "\x48\x47", "\x00\x00",
-  "\x48\x48", "\x48\x49", "\x48\x4a", "\x00\x00", "\x00\x00", "\x48\x4b",
-  "\x48\x4c", "\x00\x00", "\x00\x00", "\x48\x53", "\x00\x00", "\x48\x4d",
-  "\x48\x4e", "\x00\x00", "\x00\x00", "\x48\x4f", "\x00\x00", "\x00\x00",
-  "\x48\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x51",
-  "\x48\x52", "\x48\x54", "\x00\x00", "\x48\x55", "\x48\x56", "\x48\x57",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x58", "\x00\x00", "\x48\x59",
-  "\x48\x5a", "\x00\x00", "\x00\x00", "\x48\x5b", "\x48\x5c", "\x00\x00",
-  "\x00\x00", "\x48\x5d", "\x48\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x5f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x48\x60", "\x48\x61", "\x48\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x48\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x64",
-  "\x48\x65", "\x00\x00", "\x00\x00", "\x48\x66", "\x48\x67", "\x48\x68",
-  "\x00\x00", "\x00\x00", "\x48\x69", "\x00\x00", "\x48\x6a", "\x48\x6b",
-  "\x48\x6c", "\x00\x00", "\x48\x6d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x48\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x6f",
-  "\x48\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x71",
-  "\x48\x72", "\x48\x73", "\x48\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x48\x75", "\x48\x76", "\x48\x77", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x78", "\x48\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x48\x7a", "\x48\x7b",
-  "\x00\x00", "\x48\x7c", "\x48\x7d", "\x00\x00", "\x48\x7e", "\x49\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x22", "\x49\x23", "\x49\x24",
-  "\x49\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x26",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x27", "\x00\x00", "\x00\x00",
-  "\x49\x28", "\x49\x29", "\x00\x00", "\x00\x00", "\x49\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x2b", "\x49\x2c", "\x49\x2d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x2e",
-  "\x49\x2f", "\x49\x30", "\x00\x00", "\x00\x00", "\x49\x31", "\x49\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x33", "\x00\x00",
-  "\x00\x00", "\x49\x34", "\x00\x00", "\x49\x35", "\x00\x00", "\x00\x00",
-  "\x49\x36", "\x49\x37", "\x49\x38", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x39", "\x49\x3a", "\x49\x3b", "\x49\x3c", "\x00\x00", "\x00\x00",
-  "\x49\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x3d", "\x49\x3e", "\x49\x3f", "\x49\x40", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x42", "\x49\x43", "\x49\x44",
-  "\x00\x00", "\x49\x45", "\x49\x46", "\x49\x47", "\x49\x48", "\x00\x00",
-  "\x00\x00", "\x49\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x4a",
-  "\x49\x4b", "\x49\x4c", "\x49\x4d", "\x49\x4e", "\x49\x4f", "\x49\x50",
-  "\x00\x00", "\x00\x00", "\x49\x51", "\x49\x52", "\x49\x53", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x54", "\x49\x55", "\x00\x00",
-  "\x00\x00", "\x49\x56", "\x00\x00", "\x00\x00", "\x49\x57", "\x49\x58",
-  "\x49\x59", "\x00\x00", "\x49\x5a", "\x49\x5b", "\x49\x5c", "\x49\x5d",
-  "\x00\x00", "\x49\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x5f",
-  "\x49\x60", "\x49\x61", "\x49\x62", "\x49\x63", "\x49\x64", "\x49\x65",
-  "\x49\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x67", "\x49\x68",
-  "\x00\x00", "\x00\x00", "\x49\x69", "\x49\x6a", "\x00\x00", "\x49\x6b",
-  "\x49\x6c", "\x00\x00", "\x49\x6d", "\x00\x00", "\x49\x6e", "\x49\x6f",
-  "\x49\x70", "\x49\x71", "\x49\x72", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x73", "\x49\x74", "\x49\x75", "\x00\x00", "\x00\x00", "\x49\x76",
-  "\x49\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x49\x78",
-  "\x00\x00", "\x49\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x49\x7a", "\x00\x00", "\x00\x00", "\x49\x7b", "\x00\x00", "\x49\x7c",
-  "\x00\x00", "\x49\x7d", "\x00\x00", "\x49\x7e", "\x4a\x21", "\x4a\x22",
-  "\x4a\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x24",
-  "\x00\x00", "\x4a\x25", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x26", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x27", "\x4a\x28", "\x4a\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x2a", "\x00\x00", "\x4a\x2b", "\x4a\x2c", "\x4a\x2d",
-  "\x00\x00", "\x4a\x2e", "\x4a\x2f", "\x4a\x30", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4a\x31", "\x4a\x32", "\x4a\x33", "\x00\x00",
-  "\x00\x00", "\x4a\x34", "\x4a\x35", "\x4a\x36", "\x4a\x37", "\x00\x00",
-  "\x00\x00", "\x4a\x38", "\x00\x00", "\x00\x00", "\x4a\x39", "\x4a\x3a",
-  "\x00\x00", "\x4a\x3b", "\x4a\x3c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4a\x3d", "\x00\x00", "\x4a\x3e", "\x4a\x3f",
-  "\x4a\x40", "\x4a\x41", "\x4a\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x43", "\x00\x00", "\x00\x00", "\x4a\x44", "\x00\x00", "\x00\x00",
-  "\x4a\x45", "\x00\x00", "\x4a\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x47", "\x4a\x48", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x4b", "\x4a\x4c", "\x4a\x4d",
-  "\x4a\x4e", "\x4a\x4f", "\x00\x00", "\x4a\x50", "\x4a\x51", "\x4a\x52",
-  "\x4a\x53", "\x00\x00", "\x00\x00", "\x4a\x54", "\x00\x00", "\x4a\x55",
-  "\x4a\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x57", "\x00\x00",
-  "\x4a\x58", "\x00\x00", "\x4a\x59", "\x00\x00", "\x4a\x5a", "\x00\x00",
-  "\x00\x00", "\x4a\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4a\x5c", "\x00\x00", "\x00\x00", "\x4a\x5d", "\x00\x00", "\x00\x00",
-  "\x4a\x5e", "\x4a\x5f", "\x00\x00", "\x4a\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x61", "\x4a\x62", "\x00\x00",
-  "\x00\x00", "\x4a\x63", "\x4a\x64", "\x00\x00", "\x00\x00", "\x4a\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x66", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x68", "\x4a\x69", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x6a", "\x4a\x6b", "\x4a\x6c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4a\x6d", "\x4a\x6e", "\x00\x00", "\x00\x00",
-  "\x4a\x6f", "\x00\x00", "\x00\x00", "\x4a\x70", "\x4a\x71", "\x00\x00",
-  "\x00\x00", "\x4a\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x73", "\x00\x00", "\x4a\x74", "\x00\x00", "\x00\x00",
-  "\x4a\x75", "\x4a\x76", "\x4a\x77", "\x00\x00", "\x4a\x78", "\x4a\x79",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4a\x7a",
-  "\x4a\x7b", "\x4a\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4a\x7d", "\x4a\x7e", "\x00\x00", "\x00\x00", "\x4b\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x22", "\x00\x00", "\x4b\x23",
-  "\x4b\x24", "\x00\x00", "\x4b\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4b\x26", "\x00\x00", "\x4b\x27", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x28", "\x4b\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x2a", "\x4b\x2b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x2d",
-  "\x00\x00", "\x4b\x2e", "\x00\x00", "\x00\x00", "\x4b\x2f", "\x4b\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x31", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4b\x32", "\x4b\x33", "\x00\x00", "\x00\x00",
-  "\x4b\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x35",
-  "\x4b\x36", "\x00\x00", "\x4b\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4b\x38", "\x4b\x39", "\x00\x00", "\x00\x00",
-  "\x4b\x3a", "\x00\x00", "\x4b\x3b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4b\x3c", "\x00\x00", "\x4b\x3d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x3e", "\x4b\x3f", "\x4b\x40", "\x4b\x41", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x42", "\x4b\x43",
-  "\x00\x00", "\x4b\x44", "\x00\x00", "\x4b\x45", "\x4b\x46", "\x00\x00",
-  "\x4b\x47", "\x4b\x48", "\x00\x00", "\x4b\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x4a", "\x00\x00", "\x4b\x4b",
-  "\x00\x00", "\x00\x00", "\x4b\x4c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4b\x4d", "\x4b\x4e", "\x00\x00", "\x4b\x4f", "\x00\x00", "\x4b\x50",
-  "\x4b\x51", "\x4b\x52", "\x00\x00", "\x4b\x53", "\x00\x00", "\x00\x00",
-  "\x4b\x54", "\x00\x00", "\x4b\x55", "\x00\x00", "\x4b\x56", "\x4b\x57",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x58", "\x00\x00", "\x4b\x59",
-  "\x4b\x5a", "\x4b\x5b", "\x00\x00", "\x4b\x5c", "\x00\x00", "\x00\x00",
-  "\x4b\x5d", "\x4b\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x5f",
-  "\x4b\x60", "\x00\x00", "\x4b\x61", "\x4b\x62", "\x00\x00", "\x4b\x63",
-  "\x00\x00", "\x4b\x64", "\x00\x00", "\x00\x00", "\x4b\x65", "\x4b\x66",
-  "\x00\x00", "\x4b\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x68", "\x4b\x69", "\x00\x00", "\x00\x00", "\x4b\x6a",
-  "\x00\x00", "\x4b\x6b", "\x4b\x6c", "\x00\x00", "\x00\x00", "\x4b\x6d",
-  "\x00\x00", "\x00\x00", "\x4b\x6e", "\x4b\x6f", "\x00\x00", "\x00\x00",
-  "\x4b\x70", "\x00\x00", "\x00\x00", "\x4b\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4b\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x4b\x73",
-  "\x00\x00", "\x4b\x74", "\x00\x00", "\x00\x00", "\x4b\x75", "\x4b\x76",
-  "\x00\x00", "\x4b\x77", "\x4b\x78", "\x4b\x79", "\x00\x00", "\x4b\x7a",
-  "\x00\x00", "\x4b\x7b", "\x4b\x7c", "\x4b\x7d", "\x00\x00", "\x4b\x7e",
-  "\x00\x00", "\x4c\x21", "\x4c\x22", "\x4c\x23", "\x00\x00", "\x00\x00",
-  "\x4c\x24", "\x00\x00", "\x00\x00", "\x4c\x25", "\x00\x00", "\x00\x00",
-  "\x4c\x26", "\x4c\x27", "\x4c\x28", "\x4c\x29", "\x4c\x2a", "\x00\x00",
-  "\x4c\x2b", "\x00\x00", "\x4c\x2c", "\x4c\x2d", "\x4c\x2e", "\x4c\x2f",
-  "\x4c\x30", "\x4c\x31", "\x4c\x32", "\x4c\x33", "\x4c\x34", "\x4c\x35",
-  "\x4c\x36", "\x4c\x37", "\x00\x00", "\x00\x00", "\x4c\x38", "\x4c\x39",
-  "\x00\x00", "\x4c\x3a", "\x4c\x3b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x3c", "\x00\x00", "\x4c\x3d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x3e", "\x4c\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x40", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x42",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x43", "\x4c\x44", "\x4c\x45",
-  "\x00\x00", "\x00\x00", "\x4c\x46", "\x00\x00", "\x4c\x47", "\x4c\x48",
-  "\x00\x00", "\x00\x00", "\x4c\x49", "\x4c\x4a", "\x4c\x4b", "\x4c\x4c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x4d", "\x4c\x4e", "\x4c\x4f",
-  "\x00\x00", "\x4c\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4c\x51", "\x4c\x52", "\x4c\x53", "\x4c\x54", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x55", "\x4c\x56",
-  "\x4c\x57", "\x00\x00", "\x4c\x58", "\x00\x00", "\x00\x00", "\x4c\x59",
-  "\x4c\x5a", "\x4c\x5b", "\x00\x00", "\x4c\x5c", "\x00\x00", "\x00\x00",
-  "\x4c\x5d", "\x00\x00", "\x4c\x5e", "\x4c\x5f", "\x4c\x60", "\x4c\x61",
-  "\x00\x00", "\x00\x00", "\x4c\x62", "\x4c\x63", "\x00\x00", "\x4c\x64",
-  "\x4c\x65", "\x00\x00", "\x00\x00", "\x4c\x66", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4c\x67", "\x00\x00", "\x4c\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4c\x69", "\x4c\x6a", "\x4c\x6b", "\x00\x00", "\x00\x00",
-  "\x4c\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x6d", "\x00\x00",
-  "\x00\x00", "\x4c\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x6f", "\x00\x00", "\x4c\x70", "\x4c\x71", "\x00\x00", "\x00\x00",
-  "\x4c\x72", "\x4c\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4c\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x75", "\x00\x00",
-  "\x4c\x76", "\x4c\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x79", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4c\x7a", "\x4c\x7b",
-  "\x4c\x7c", "\x00\x00", "\x00\x00", "\x4c\x7d", "\x4c\x7e", "\x4d\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x22", "\x4d\x23", "\x4d\x24",
-  "\x4d\x25", "\x00\x00", "\x00\x00", "\x4d\x26", "\x00\x00", "\x00\x00",
-  "\x4d\x27", "\x00\x00", "\x4d\x28", "\x4d\x29", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4d\x2a", "\x4d\x2b", "\x00\x00", "\x00\x00",
-  "\x4d\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x2d", "\x4d\x2e",
-  "\x4d\x2f", "\x4d\x30", "\x00\x00", "\x00\x00", "\x4d\x31", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4d\x32", "\x4d\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x34", "\x00\x00", "\x4d\x35",
-  "\x00\x00", "\x4d\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4d\x37", "\x4d\x38", "\x4d\x39", "\x00\x00", "\x4d\x3a", "\x4d\x3b",
-  "\x00\x00", "\x4d\x3c", "\x4d\x3d", "\x4d\x3e", "\x4d\x3f", "\x4d\x40",
-  "\x4d\x41", "\x4d\x42", "\x00\x00", "\x00\x00", "\x4d\x43", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4d\x44", "\x4d\x45", "\x00\x00", "\x4d\x46",
-  "\x4d\x47", "\x00\x00", "\x4d\x48", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4d\x49", "\x00\x00", "\x00\x00", "\x4d\x4a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x4b", "\x00\x00", "\x4d\x4c",
-  "\x4d\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4d\x4e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x4f",
-  "\x4d\x50", "\x4d\x51", "\x00\x00", "\x00\x00", "\x4d\x52", "\x00\x00",
-  "\x4d\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4d\x54", "\x00\x00", "\x4d\x55", "\x4d\x56", "\x4d\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x58", "\x00\x00", "\x00\x00",
-  "\x4d\x59", "\x4d\x5a", "\x4d\x5b", "\x00\x00", "\x00\x00", "\x4d\x5c",
-  "\x00\x00", "\x00\x00", "\x4d\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x5e", "\x00\x00", "\x4d\x5f", "\x4d\x60", "\x00\x00",
-  "\x4d\x61", "\x4d\x62", "\x4d\x63", "\x00\x00", "\x4d\x64", "\x4d\x65",
-  "\x4d\x66", "\x00\x00", "\x00\x00", "\x4d\x67", "\x4d\x68", "\x00\x00",
-  "\x4d\x69", "\x00\x00", "\x4d\x6a", "\x00\x00", "\x00\x00", "\x4d\x6b",
-  "\x00\x00", "\x00\x00", "\x4d\x6c", "\x4d\x6d", "\x00\x00", "\x4d\x6e",
-  "\x4d\x6f", "\x00\x00", "\x00\x00", "\x4d\x70", "\x00\x00", "\x4d\x71",
-  "\x4d\x72", "\x4d\x73", "\x4d\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4d\x75", "\x00\x00", "\x4d\x76", "\x4d\x77", "\x00\x00",
-  "\x00\x00", "\x4d\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x79",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4d\x7a", "\x4d\x7b",
-  "\x00\x00", "\x4d\x7c", "\x00\x00", "\x00\x00", "\x4d\x7d", "\x4d\x7e",
-  "\x4e\x21", "\x00\x00", "\x4e\x22", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x24", "\x4e\x25", "\x00\x00", "\x4e\x26", "\x4e\x27", "\x4e\x28",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x29", "\x4e\x23", "\x4e\x2a",
-  "\x4e\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x2c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x2d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x2e", "\x4e\x2f", "\x4e\x30",
-  "\x4e\x31", "\x4e\x32", "\x00\x00", "\x4e\x33", "\x00\x00", "\x00\x00",
-  "\x4e\x34", "\x4e\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x36",
-  "\x4e\x37", "\x4e\x38", "\x4e\x39", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x3a", "\x4e\x3b", "\x4e\x3c", "\x00\x00",
-  "\x4e\x3d", "\x4e\x3e", "\x00\x00", "\x4e\x3f", "\x4e\x40", "\x4e\x41",
-  "\x4e\x42", "\x4e\x43", "\x4e\x44", "\x4e\x45", "\x00\x00", "\x4e\x46",
-  "\x00\x00", "\x00\x00", "\x4e\x47", "\x4e\x48", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4e\x49", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x4b", "\x00\x00", "\x4e\x4c",
-  "\x4e\x4d", "\x00\x00", "\x4e\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4e\x50", "\x4e\x51", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x52", "\x00\x00", "\x4e\x53", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x54", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x55", "\x4e\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x57", "\x00\x00", "\x00\x00", "\x4e\x58", "\x00\x00", "\x00\x00",
-  "\x4e\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x5a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x5b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x5c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x5e", "\x00\x00",
-  "\x4e\x5f", "\x4e\x60", "\x00\x00", "\x4e\x61", "\x00\x00", "\x4e\x62",
-  "\x4e\x63", "\x00\x00", "\x4e\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x65", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x66", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4e\x67", "\x4e\x68", "\x4e\x69", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4e\x6a", "\x4e\x6b", "\x4e\x6c", "\x00\x00",
-  "\x00\x00", "\x4e\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x6e",
-  "\x4e\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x4e\x70", "\x00\x00",
-  "\x00\x00", "\x4e\x71", "\x4e\x72", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x73", "\x00\x00", "\x00\x00", "\x4e\x74", "\x4e\x75", "\x4e\x76",
-  "\x00\x00", "\x00\x00", "\x4e\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x78", "\x4e\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4e\x7a", "\x00\x00", "\x4e\x7b", "\x4e\x7c", "\x4e\x7d", "\x00\x00",
-  "\x4e\x7e", "\x00\x00", "\x4f\x21", "\x00\x00", "\x00\x00", "\x4f\x22",
-  "\x00\x00", "\x00\x00", "\x4f\x23", "\x00\x00", "\x4f\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x25", "\x00\x00", "\x4f\x26", "\x4f\x27",
-  "\x4f\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x29", "\x00\x00", "\x00\x00", "\x4f\x2a", "\x00\x00", "\x00\x00",
-  "\x4f\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x2c", "\x4f\x2d",
-  "\x4f\x2e", "\x4f\x2f", "\x4f\x30", "\x4f\x31", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4f\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x33", "\x00\x00", "\x00\x00", "\x4f\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x35", "\x00\x00", "\x00\x00", "\x4f\x36",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x37", "\x4f\x38", "\x00\x00",
-  "\x4f\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x3a", "\x4f\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x3c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x3d", "\x4f\x3e",
-  "\x4f\x3f", "\x00\x00", "\x00\x00", "\x4f\x40", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4f\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x42", "\x4f\x43", "\x4f\x44", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x45", "\x00\x00", "\x4f\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x47", "\x00\x00", "\x4f\x48", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x49", "\x4f\x4a", "\x00\x00", "\x00\x00", "\x4f\x4b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x4c", "\x00\x00", "\x00\x00", "\x4f\x4d",
-  "\x4f\x4e", "\x4f\x4f", "\x00\x00", "\x00\x00", "\x4f\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x4f\x51", "\x4f\x52", "\x00\x00", "\x00\x00",
-  "\x4f\x53", "\x4f\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x55",
-  "\x4f\x56", "\x4f\x57", "\x4f\x58", "\x4f\x59", "\x00\x00", "\x4f\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x5b", "\x00\x00",
-  "\x4f\x5c", "\x4f\x5d", "\x4f\x5e", "\x00\x00", "\x00\x00", "\x4f\x5f",
-  "\x4f\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x61", "\x00\x00",
-  "\x4f\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x63", "\x4f\x64",
-  "\x00\x00", "\x4f\x65", "\x00\x00", "\x4f\x66", "\x4f\x67", "\x00\x00",
-  "\x4f\x68", "\x4f\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x6a",
-  "\x00\x00", "\x4f\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x6c",
-  "\x4f\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x6e", "\x4f\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x4f\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x4f\x74", "\x4f\x75", "\x4f\x76", "\x00\x00", "\x4f\x73", "\x00\x00",
-  "\x00\x00", "\x4f\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x78",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x4f\x79", "\x4f\x7a", "\x00\x00",
-  "\x00\x00", "\x4f\x7b", "\x4f\x7c", "\x4f\x7d", "\x4f\x7e", "\x50\x21",
-  "\x00\x00", "\x50\x22", "\x00\x00", "\x50\x23", "\x50\x24", "\x50\x25",
-  "\x50\x26", "\x00\x00", "\x00\x00", "\x50\x27", "\x00\x00", "\x50\x28",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x29", "\x50\x2a", "\x00\x00",
-  "\x50\x2b", "\x50\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x2f", "\x50\x30",
-  "\x50\x31", "\x00\x00", "\x00\x00", "\x50\x2d", "\x00\x00", "\x50\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x33", "\x50\x34", "\x50\x35",
-  "\x00\x00", "\x00\x00", "\x50\x37", "\x50\x38", "\x00\x00", "\x00\x00",
-  "\x50\x39", "\x50\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x3b",
-  "\x50\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x3e", "\x50\x3f",
-  "\x00\x00", "\x50\x40", "\x00\x00", "\x50\x41", "\x50\x42", "\x50\x43",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x44", "\x00\x00",
-  "\x50\x45", "\x00\x00", "\x50\x46", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x48", "\x00\x00",
-  "\x00\x00", "\x50\x49", "\x50\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x50\x4b", "\x00\x00", "\x50\x4c", "\x00\x00",
-  "\x50\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x4e",
-  "\x50\x4f", "\x50\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x51",
-  "\x50\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x53", "\x00\x00",
-  "\x50\x54", "\x00\x00", "\x00\x00", "\x50\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x50\x56", "\x00\x00", "\x00\x00", "\x50\x57", "\x50\x58",
-  "\x50\x59", "\x00\x00", "\x50\x5a", "\x00\x00", "\x50\x5b", "\x50\x5c",
-  "\x50\x5d", "\x00\x00", "\x50\x5e", "\x50\x5f", "\x00\x00", "\x50\x60",
-  "\x50\x61", "\x50\x62", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x63", "\x00\x00", "\x50\x64", "\x50\x65", "\x50\x66", "\x50\x67",
-  "\x00\x00", "\x50\x68", "\x00\x00", "\x00\x00", "\x50\x69", "\x50\x6a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x6b", "\x50\x6c",
-  "\x50\x6d", "\x00\x00", "\x50\x6e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x50\x6f", "\x00\x00", "\x50\x70", "\x00\x00", "\x00\x00", "\x50\x71",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x50\x72", "\x00\x00", "\x00\x00",
-  "\x50\x73", "\x50\x74", "\x00\x00", "\x50\x75", "\x00\x00", "\x00\x00",
-  "\x50\x76", "\x50\x77", "\x00\x00", "\x50\x78", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x50\x79", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x50\x7a", "\x00\x00", "\x50\x7b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x50\x7c", "\x00\x00", "\x00\x00", "\x50\x7d", "\x50\x7e",
-  "\x00\x00", "\x51\x21", "\x00\x00", "\x51\x22", "\x00\x00", "\x00\x00",
-  "\x51\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x24",
-  "\x51\x25", "\x00\x00", "\x51\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x51\x27", "\x51\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x2a",
-  "\x51\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x2c", "\x00\x00",
-  "\x51\x2d", "\x51\x2e", "\x00\x00", "\x51\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x51\x30", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x51\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x51\x32", "\x00\x00", "\x00\x00", "\x51\x33", "\x00\x00", "\x00\x00",
-  "\x51\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x51\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x36", "\x00\x00",
-  "\x51\x37", "\x00\x00", "\x51\x38", "\x51\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x51\x3a", "\x51\x3b", "\x00\x00", "\x00\x00", "\x51\x3c",
-  "\x51\x3d", "\x51\x3e", "\x51\x3f", "\x51\x40", "\x00\x00", "\x51\x41",
-  "\x51\x42", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x43", "\x51\x44",
-  "\x51\x45", "\x00\x00", "\x00\x00", "\x51\x46", "\x00\x00", "\x00\x00",
-  "\x51\x47", "\x51\x48", "\x00\x00", "\x51\x49", "\x51\x4a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x4b", "\x00\x00", "\x51\x4c",
-  "\x00\x00", "\x00\x00", "\x51\x4d", "\x00\x00", "\x00\x00", "\x51\x4e",
-  "\x51\x4f", "\x00\x00", "\x00\x00", "\x51\x50", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x51", "\x00\x00", "\x51\x52",
-  "\x00\x00", "\x51\x53", "\x00\x00", "\x00\x00", "\x51\x54", "\x51\x55",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x56", "\x51\x57", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x58", "\x51\x59", "\x00\x00",
-  "\x00\x00", "\x51\x5a", "\x51\x5b", "\x00\x00", "\x51\x5c", "\x00\x00",
-  "\x00\x00", "\x51\x5d", "\x51\x5e", "\x51\x5f", "\x00\x00", "\x51\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x61", "\x00\x00", "\x51\x62",
-  "\x51\x63", "\x51\x64", "\x00\x00", "\x00\x00", "\x51\x65", "\x00\x00",
-  "\x00\x00", "\x51\x66", "\x00\x00", "\x51\x67", "\x00\x00", "\x00\x00",
-  "\x51\x68", "\x51\x69", "\x51\x6a", "\x51\x6b", "\x00\x00", "\x51\x6c",
-  "\x51\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x6e",
-  "\x00\x00", "\x00\x00", "\x51\x6f", "\x51\x70", "\x00\x00", "\x51\x71",
-  "\x51\x72", "\x51\x73", "\x51\x74", "\x51\x75", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x51\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x51\x77",
-  "\x00\x00", "\x51\x78", "\x51\x79", "\x51\x7a", "\x00\x00", "\x51\x7b",
-  "\x51\x7c", "\x51\x7d", "\x51\x7e", "\x52\x21", "\x00\x00", "\x00\x00",
-  "\x52\x22", "\x52\x23", "\x00\x00", "\x52\x24", "\x52\x25", "\x52\x26",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x27",
-  "\x52\x28", "\x52\x29", "\x52\x2a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x2b", "\x00\x00", "\x52\x2c", "\x00\x00", "\x00\x00", "\x52\x2d",
-  "\x52\x2e", "\x00\x00", "\x00\x00", "\x52\x2f", "\x00\x00", "\x52\x30",
-  "\x00\x00", "\x00\x00", "\x52\x31", "\x52\x32", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x52\x33", "\x52\x34", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x52\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x36", "\x00\x00", "\x52\x37", "\x52\x38", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x39", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x52\x3a", "\x00\x00", "\x00\x00", "\x52\x3b", "\x00\x00",
-  "\x52\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x3d",
-  "\x52\x3e", "\x00\x00", "\x00\x00", "\x52\x3f", "\x52\x40", "\x00\x00",
-  "\x52\x41", "\x00\x00", "\x00\x00", "\x52\x42", "\x52\x43", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x44", "\x52\x45", "\x52\x46", "\x52\x47",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x48", "\x00\x00",
-  "\x00\x00", "\x52\x49", "\x00\x00", "\x00\x00", "\x52\x4a", "\x00\x00",
-  "\x52\x4b", "\x52\x4c", "\x00\x00", "\x52\x4d", "\x52\x4e", "\x00\x00",
-  "\x52\x4f", "\x52\x50", "\x52\x51", "\x52\x52", "\x00\x00", "\x52\x53",
-  "\x52\x54", "\x00\x00", "\x52\x55", "\x52\x56", "\x00\x00", "\x00\x00",
-  "\x52\x57", "\x52\x58", "\x52\x59", "\x00\x00", "\x52\x5a", "\x00\x00",
-  "\x52\x5b", "\x00\x00", "\x00\x00", "\x52\x5c", "\x52\x5d", "\x52\x5e",
-  "\x52\x5f", "\x00\x00", "\x52\x60", "\x00\x00", "\x00\x00", "\x52\x61",
-  "\x00\x00", "\x52\x62", "\x52\x63", "\x00\x00", "\x52\x64", "\x52\x65",
-  "\x52\x66", "\x00\x00", "\x52\x67", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x52\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x69", "\x52\x6a", "\x00\x00", "\x52\x6b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x52\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x52\x6d", "\x00\x00", "\x52\x6e", "\x52\x6f", "\x00\x00", "\x52\x70",
-  "\x00\x00", "\x00\x00", "\x52\x71", "\x52\x72", "\x52\x73", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x52\x74", "\x52\x76", "\x52\x77", "\x52\x78",
-  "\x00\x00", "\x52\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x52\x79",
-  "\x52\x7a", "\x52\x7b", "\x52\x7c", "\x52\x7d", "\x52\x7e", "\x00\x00",
-  "\x00\x00", "\x53\x21", "\x00\x00", "\x53\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x23", "\x00\x00", "\x53\x24", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x25", "\x53\x26", "\x00\x00", "\x53\x27", "\x00\x00",
-  "\x53\x28", "\x53\x29", "\x00\x00", "\x00\x00", "\x53\x2a", "\x53\x2b",
-  "\x53\x2c", "\x53\x2d", "\x53\x2e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x2f", "\x53\x30", "\x00\x00", "\x53\x31", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x32", "\x53\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x34",
-  "\x53\x35", "\x00\x00", "\x00\x00", "\x53\x36", "\x53\x37", "\x53\x38",
-  "\x00\x00", "\x00\x00", "\x53\x39", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x3a", "\x00\x00", "\x00\x00", "\x53\x3b", "\x53\x3c",
-  "\x53\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x3e", "\x00\x00",
-  "\x53\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x40", "\x53\x41",
-  "\x53\x42", "\x00\x00", "\x53\x43", "\x00\x00", "\x53\x44", "\x53\x45",
-  "\x00\x00", "\x00\x00", "\x53\x46", "\x53\x47", "\x00\x00", "\x00\x00",
-  "\x53\x48", "\x00\x00", "\x53\x49", "\x53\x4a", "\x53\x4b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x4c", "\x53\x4d", "\x53\x4e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x53\x4f", "\x00\x00",
-  "\x53\x50", "\x53\x51", "\x53\x52", "\x00\x00", "\x00\x00", "\x53\x53",
-  "\x53\x54", "\x53\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x53\x56", "\x00\x00", "\x00\x00", "\x53\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x58", "\x00\x00", "\x00\x00", "\x53\x59", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x5a", "\x53\x5b", "\x53\x5c", "\x53\x5d",
-  "\x00\x00", "\x53\x5e", "\x53\x5f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x60", "\x53\x61", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x53\x63", "\x00\x00", "\x53\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x53\x65", "\x00\x00", "\x53\x66", "\x53\x67", "\x00\x00", "\x53\x68",
-  "\x53\x69", "\x53\x6a", "\x00\x00", "\x53\x6b", "\x00\x00", "\x00\x00",
-  "\x53\x6c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x53\x6d", "\x53\x6e", "\x00\x00", "\x53\x6f", "\x53\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x71", "\x00\x00", "\x53\x72", "\x53\x73",
-  "\x53\x74", "\x00\x00", "\x53\x75", "\x53\x76", "\x00\x00", "\x53\x77",
-  "\x00\x00", "\x00\x00", "\x53\x78", "\x53\x79", "\x53\x7a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x7b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x53\x7c", "\x53\x7d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x53\x7e", "\x54\x21", "\x54\x22", "\x54\x23",
-  "\x00\x00", "\x00\x00", "\x54\x24", "\x54\x25", "\x00\x00", "\x00\x00",
-  "\x54\x26", "\x54\x27", "\x00\x00", "\x54\x28", "\x54\x29", "\x54\x2a",
-  "\x54\x2b", "\x54\x2c", "\x54\x2d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x2e", "\x54\x2f", "\x54\x30", "\x54\x31",
-  "\x00\x00", "\x54\x32", "\x54\x34", "\x00\x00", "\x00\x00", "\x54\x35",
-  "\x54\x36", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x37", "\x54\x38",
-  "\x00\x00", "\x54\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x3b", "\x54\x3c", "\x00\x00",
-  "\x00\x00", "\x54\x3d", "\x54\x3e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x33", "\x54\x3f", "\x54\x40", "\x54\x41",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x42", "\x00\x00", "\x54\x43",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x44", "\x54\x45",
-  "\x00\x00", "\x00\x00", "\x54\x46", "\x54\x47", "\x54\x48", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x49", "\x54\x4a", "\x00\x00", "\x54\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x4c", "\x00\x00", "\x00\x00",
-  "\x54\x4d", "\x54\x4e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x4f", "\x54\x50", "\x00\x00", "\x54\x51", "\x54\x52", "\x00\x00",
-  "\x54\x53", "\x00\x00", "\x54\x54", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x54\x55", "\x54\x56", "\x00\x00", "\x54\x57",
-  "\x54\x58", "\x00\x00", "\x00\x00", "\x54\x59", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x5a", "\x00\x00", "\x00\x00",
-  "\x54\x5b", "\x54\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x5d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x5e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x5f", "\x00\x00",
-  "\x00\x00", "\x54\x60", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x54\x61", "\x54\x62", "\x00\x00", "\x00\x00", "\x54\x63", "\x00\x00",
-  "\x00\x00", "\x54\x64", "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x65",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x66", "\x00\x00", "\x00\x00",
-  "\x54\x67", "\x00\x00", "\x54\x68", "\x00\x00", "\x00\x00", "\x54\x69",
-  "\x54\x6a", "\x54\x6c", "\x54\x6b", "\x54\x6d", "\x54\x6e", "\x54\x6f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x54\x70", "\x54\x71", "\x00\x00",
-  "\x00\x00", "\x54\x72", "\x54\x73", "\x00\x00", "\x00\x00", "\x54\x74",
-  "\x54\x75", "\x54\x76", "\x54\x77", "\x54\x78", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x54\x79", "\x00\x00", "\x54\x7a", "\x54\x7b", "\x54\x7c",
-  "\x54\x7d", "\x54\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x21",
-  "\x55\x22", "\x55\x23", "\x55\x24", "\x55\x25", "\x55\x26", "\x00\x00",
-  "\x55\x27", "\x00\x00", "\x55\x28", "\x55\x29", "\x55\x2a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x2b", "\x55\x2c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x2d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x2e", "\x55\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x31",
-  "\x00\x00", "\x00\x00", "\x55\x32", "\x55\x33", "\x55\x34", "\x00\x00",
-  "\x00\x00", "\x55\x35", "\x55\x36", "\x00\x00", "\x00\x00", "\x55\x37",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x39", "\x55\x3a",
-  "\x55\x3b", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x3c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x55\x3d", "\x00\x00", "\x55\x3e", "\x00\x00",
-  "\x00\x00", "\x55\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x40",
-  "\x00\x00", "\x55\x41", "\x55\x42", "\x00\x00", "\x00\x00", "\x55\x43",
-  "\x55\x44", "\x00\x00", "\x00\x00", "\x55\x45", "\x55\x46", "\x55\x47",
-  "\x55\x48", "\x55\x49", "\x00\x00", "\x55\x4a", "\x00\x00", "\x00\x00",
-  "\x55\x4b", "\x55\x4c", "\x55\x4d", "\x00\x00", "\x55\x4e", "\x00\x00",
-  "\x55\x4f", "\x55\x50", "\x00\x00", "\x55\x51", "\x55\x52", "\x55\x53",
-  "\x55\x54", "\x55\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x56",
-  "\x00\x00", "\x55\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x58", "\x00\x00", "\x55\x59", "\x00\x00", "\x55\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x5b", "\x55\x5c", "\x00\x00",
-  "\x55\x5d", "\x00\x00", "\x55\x5e", "\x55\x5f", "\x00\x00", "\x55\x60",
-  "\x00\x00", "\x55\x61", "\x00\x00", "\x55\x62", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x63", "\x55\x64", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x55\x65", "\x00\x00", "\x55\x66", "\x55\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x69",
-  "\x55\x6a", "\x55\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x55\x6c", "\x55\x6d", "\x00\x00", "\x55\x6e", "\x55\x6f",
-  "\x55\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x55\x71", "\x55\x72",
-  "\x55\x73", "\x55\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x55\x75", "\x00\x00", "\x55\x76", "\x00\x00", "\x00\x00", "\x55\x77",
-  "\x00\x00", "\x55\x78", "\x55\x79", "\x00\x00", "\x55\x7a", "\x55\x7b",
-  "\x55\x7c", "\x55\x7d", "\x55\x7e", "\x00\x00", "\x56\x21", "\x00\x00",
-  "\x56\x22", "\x56\x23", "\x00\x00", "\x00\x00", "\x56\x24", "\x00\x00",
-  "\x00\x00", "\x56\x25", "\x56\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x56\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x28",
-  "\x56\x29", "\x56\x2a", "\x56\x2b", "\x56\x2c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x2d", "\x00\x00", "\x56\x2e", "\x00\x00", "\x56\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x30", "\x00\x00", "\x00\x00",
-  "\x56\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x32",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x33", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x34", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x35", "\x00\x00", "\x56\x36", "\x56\x37", "\x00\x00",
-  "\x56\x38", "\x00\x00", "\x00\x00", "\x56\x39", "\x00\x00", "\x56\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x3c", "\x56\x3d",
-  "\x56\x3e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x56\x3f", "\x56\x40", "\x56\x41", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x56\x42", "\x00\x00", "\x56\x43", "\x56\x44", "\x56\x45", "\x00\x00",
-  "\x00\x00", "\x56\x47", "\x56\x48", "\x56\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x4a", "\x00\x00", "\x00\x00", "\x56\x4b",
-  "\x00\x00", "\x56\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x4c", "\x00\x00", "\x56\x4d", "\x00\x00", "\x00\x00",
-  "\x56\x4e", "\x00\x00", "\x00\x00", "\x56\x4f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x50", "\x56\x51", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x56\x52", "\x00\x00", "\x56\x53", "\x56\x54", "\x56\x56", "\x00\x00",
-  "\x56\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x58",
-  "\x56\x55", "\x00\x00", "\x00\x00", "\x56\x59", "\x56\x5a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x5b", "\x00\x00",
-  "\x56\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x5d", "\x00\x00",
-  "\x56\x5e", "\x56\x5f", "\x00\x00", "\x00\x00", "\x56\x60", "\x00\x00",
-  "\x00\x00", "\x56\x61", "\x56\x62", "\x56\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x64", "\x56\x65", "\x56\x66", "\x00\x00", "\x00\x00",
-  "\x56\x67", "\x56\x68", "\x00\x00", "\x56\x69", "\x56\x6a", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x56\x6b", "\x00\x00", "\x56\x6c", "\x56\x6d",
-  "\x00\x00", "\x00\x00", "\x56\x6e", "\x56\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x70", "\x56\x71", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x72", "\x56\x73", "\x00\x00", "\x00\x00", "\x56\x74",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x75", "\x56\x76", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x56\x77", "\x56\x78",
-  "\x00\x00", "\x56\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x56\x7a", "\x56\x7b", "\x56\x7c", "\x56\x7d", "\x56\x7e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x21", "\x00\x00",
-  "\x00\x00", "\x57\x22", "\x57\x23", "\x00\x00", "\x57\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x25", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x26", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x57\x27", "\x00\x00", "\x00\x00", "\x57\x28", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x2a", "\x57\x2b", "\x57\x2c", "\x00\x00",
-  "\x57\x2d", "\x00\x00", "\x57\x2e", "\x57\x2f", "\x57\x30", "\x00\x00",
-  "\x57\x31", "\x57\x32", "\x00\x00", "\x00\x00", "\x57\x33", "\x00\x00",
-  "\x57\x34", "\x57\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x36",
-  "\x00\x00", "\x00\x00", "\x57\x37", "\x00\x00", "\x00\x00", "\x57\x38",
-  "\x00\x00", "\x57\x39", "\x00\x00", "\x57\x3a", "\x00\x00", "\x57\x3b",
-  "\x57\x3c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x3d",
-  "\x57\x3e", "\x00\x00", "\x57\x3f", "\x57\x40", "\x00\x00", "\x00\x00",
-  "\x57\x41", "\x57\x42", "\x57\x43", "\x57\x44", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x57\x45", "\x00\x00", "\x57\x46", "\x00\x00", "\x57\x47",
-  "\x00\x00", "\x57\x48", "\x00\x00", "\x00\x00", "\x57\x49", "\x00\x00",
-  "\x00\x00", "\x57\x4a", "\x00\x00", "\x57\x4b", "\x00\x00", "\x57\x4c",
-  "\x57\x4d", "\x57\x4e", "\x57\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x57\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x57\x51", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x57\x52", "\x00\x00", "\x57\x53", "\x00\x00", "\x57\x54", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x55", "\x00\x00", "\x57\x56", "\x00\x00",
-  "\x00\x00", "\x57\x57", "\x00\x00", "\x57\x58", "\x57\x59", "\x57\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x5b",
-  "\x57\x5c", "\x00\x00", "\x57\x5d", "\x57\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x5f", "\x57\x60", "\x00\x00",
-  "\x57\x61", "\x57\x62", "\x57\x64", "\x00\x00", "\x57\x65", "\x57\x66",
-  "\x57\x67", "\x00\x00", "\x57\x68", "\x57\x69", "\x57\x6a", "\x57\x6b",
-  "\x57\x6c", "\x00\x00", "\x57\x6d", "\x00\x00", "\x00\x00", "\x57\x6e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x57\x6f", "\x00\x00", "\x00\x00",
-  "\x57\x70", "\x00\x00", "\x57\x71", "\x57\x72", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x57\x73", "\x57\x74", "\x57\x75", "\x00\x00",
-  "\x00\x00", "\x57\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x57\x77", "\x57\x78", "\x00\x00", "\x00\x00", "\x57\x79",
-  "\x00\x00", "\x58\x3e", "\x57\x63", "\x57\x7a", "\x57\x7b", "\x57\x7c",
-  "\x57\x7d", "\x57\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x58\x21", "\x00\x00", "\x58\x22", "\x58\x23", "\x00\x00", "\x58\x24",
-  "\x00\x00", "\x58\x25", "\x00\x00", "\x58\x26", "\x58\x27", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x28", "\x00\x00", "\x58\x29",
-  "\x58\x2a", "\x00\x00", "\x00\x00", "\x58\x2b", "\x58\x2c", "\x00\x00",
-  "\x58\x2d", "\x58\x2e", "\x58\x2f", "\x58\x30", "\x58\x31", "\x00\x00",
-  "\x58\x32", "\x00\x00", "\x00\x00", "\x58\x33", "\x58\x4c", "\x58\x34",
-  "\x58\x35", "\x58\x36", "\x58\x37", "\x00\x00", "\x58\x38", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x39", "\x58\x3a",
-  "\x58\x3b", "\x00\x00", "\x00\x00", "\x58\x3c", "\x58\x3d", "\x58\x3f",
-  "\x00\x00", "\x58\x40", "\x58\x41", "\x00\x00", "\x58\x42", "\x58\x43",
-  "\x00\x00", "\x00\x00", "\x58\x44", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x58\x45", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x58\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x47", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x48", "\x00\x00", "\x58\x49",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x4a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x58\x4b", "\x58\x4d", "\x58\x4e", "\x58\x4f", "\x00\x00",
-  "\x58\x50", "\x58\x51", "\x00\x00", "\x58\x52", "\x00\x00", "\x00\x00",
-  "\x58\x53", "\x00\x00", "\x58\x54", "\x00\x00", "\x58\x55", "\x58\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x57", "\x00\x00", "\x58\x58",
-  "\x58\x59", "\x58\x5a", "\x00\x00", "\x58\x5b", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x58\x5c", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x5d",
-  "\x58\x5e", "\x00\x00", "\x58\x5f", "\x00\x00", "\x00\x00", "\x58\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x61",
-  "\x00\x00", "\x00\x00", "\x58\x62", "\x58\x63", "\x00\x00", "\x58\x64",
-  "\x00\x00", "\x58\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x66",
-  "\x58\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x68", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x58\x69", "\x58\x6a", "\x58\x6b", "\x00\x00",
-  "\x58\x6c", "\x58\x6d", "\x58\x6e", "\x00\x00", "\x58\x6f", "\x58\x70",
-  "\x58\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x72",
-  "\x00\x00", "\x58\x73", "\x00\x00", "\x00\x00", "\x58\x74", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x75", "\x00\x00",
-  "\x00\x00", "\x58\x76", "\x58\x77", "\x00\x00", "\x58\x78", "\x00\x00",
-  "\x58\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x7a",
-  "\x58\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x7c", "\x00\x00",
-  "\x00\x00", "\x58\x7d", "\x00\x00", "\x00\x00", "\x00\x00", "\x58\x7e",
-  "\x59\x21", "\x59\x22", "\x00\x00", "\x00\x00", "\x59\x23", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x24", "\x59\x25", "\x59\x26",
-  "\x59\x27", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x28",
-  "\x00\x00", "\x00\x00", "\x59\x2a", "\x59\x2b", "\x00\x00", "\x59\x2c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x2d", "\x59\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x30", "\x00\x00", "\x59\x31", "\x00\x00",
-  "\x59\x32", "\x59\x33", "\x00\x00", "\x59\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x59\x35", "\x59\x36", "\x59\x37", "\x59\x38", "\x00\x00",
-  "\x59\x39", "\x00\x00", "\x00\x00", "\x59\x3a", "\x59\x3b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x3c", "\x00\x00", "\x00\x00", "\x59\x29",
-  "\x59\x3d", "\x59\x3e", "\x00\x00", "\x59\x3f", "\x59\x40", "\x59\x41",
-  "\x59\x42", "\x59\x43", "\x59\x44", "\x59\x45", "\x59\x46", "\x00\x00",
-  "\x00\x00", "\x59\x47", "\x00\x00", "\x00\x00", "\x59\x48", "\x00\x00",
-  "\x00\x00", "\x59\x49", "\x59\x4a", "\x59\x4b", "\x59\x4c", "\x59\x4d",
-  "\x59\x4e", "\x59\x4f", "\x00\x00", "\x59\x50", "\x59\x51", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x52", "\x59\x53", "\x59\x54", "\x59\x55",
-  "\x00\x00", "\x59\x56", "\x00\x00", "\x59\x57", "\x00\x00", "\x59\x58",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x59", "\x59\x5a", "\x00\x00",
-  "\x00\x00", "\x59\x5b", "\x00\x00", "\x59\x5c", "\x59\x5d", "\x00\x00",
-  "\x00\x00", "\x59\x5e", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x5f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x60", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x61", "\x00\x00", "\x59\x62",
-  "\x59\x63", "\x00\x00", "\x59\x64", "\x00\x00", "\x00\x00", "\x59\x65",
-  "\x00\x00", "\x59\x66", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x59\x74", "\x59\x67", "\x00\x00", "\x59\x68", "\x59\x69",
-  "\x59\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x6b", "\x59\x6c",
-  "\x59\x6d", "\x59\x6e", "\x00\x00", "\x00\x00", "\x59\x6f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x70", "\x00\x00", "\x00\x00",
-  "\x59\x71", "\x59\x72", "\x00\x00", "\x00\x00", "\x59\x73", "\x59\x75",
-  "\x00\x00", "\x59\x76", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x59\x77", "\x59\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x59\x79", "\x00\x00", "\x59\x7a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x7b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x59\x7c", "\x00\x00", "\x00\x00", "\x59\x7d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x59\x7e",
-  "\x00\x00", "\x00\x00", "\x5a\x21", "\x5a\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x23", "\x5a\x24", "\x5a\x25", "\x5a\x26", "\x00\x00",
-  "\x5a\x27", "\x5a\x28", "\x5a\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x2a", "\x5a\x2b", "\x00\x00", "\x5a\x2c",
-  "\x00\x00", "\x00\x00", "\x5a\x2d", "\x00\x00", "\x00\x00", "\x5a\x2e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x2f",
-  "\x00\x00", "\x5a\x30", "\x5a\x31", "\x00\x00", "\x5a\x32", "\x00\x00",
-  "\x5a\x33", "\x00\x00", "\x5a\x34", "\x5a\x35", "\x00\x00", "\x00\x00",
-  "\x5a\x36", "\x38\x66", "\x5a\x37", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x38", "\x5a\x39", "\x5a\x3a", "\x00\x00", "\x00\x00", "\x5a\x3b",
-  "\x5a\x3c", "\x5a\x3d", "\x5a\x3e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x3f", "\x00\x00", "\x00\x00", "\x5a\x40", "\x5a\x41", "\x5a\x42",
-  "\x5a\x43", "\x5a\x44", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x45", "\x00\x00", "\x00\x00", "\x5a\x46", "\x00\x00", "\x00\x00",
-  "\x5a\x47", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x48", "\x5a\x49", "\x5a\x4a", "\x00\x00", "\x00\x00", "\x5a\x4b",
-  "\x5a\x6d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x4c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x4d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x4e", "\x00\x00", "\x5a\x4f", "\x00\x00",
-  "\x5a\x50", "\x00\x00", "\x5a\x51", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x52", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x53", "\x5a\x54", "\x5a\x55", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x56", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x57",
-  "\x00\x00", "\x5a\x58", "\x5a\x59", "\x5a\x5a", "\x00\x00", "\x5a\x5b",
-  "\x5a\x5c", "\x5a\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x5e", "\x5a\x5f", "\x5a\x60", "\x00\x00", "\x5a\x61",
-  "\x00\x00", "\x5a\x62", "\x5a\x63", "\x5a\x64", "\x00\x00", "\x00\x00",
-  "\x5a\x65", "\x00\x00", "\x5a\x66", "\x00\x00", "\x00\x00", "\x5a\x67",
-  "\x00\x00", "\x5a\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x5a\x69",
-  "\x00\x00", "\x00\x00", "\x5a\x6a", "\x00\x00", "\x5a\x6b", "\x00\x00",
-  "\x5a\x6c", "\x5a\x6e", "\x00\x00", "\x5a\x6f", "\x5a\x70", "\x5a\x71",
-  "\x5a\x72", "\x00\x00", "\x5a\x73", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5a\x74", "\x00\x00", "\x00\x00", "\x5a\x75", "\x5a\x76", "\x5a\x77",
-  "\x00\x00", "\x00\x00", "\x5a\x78", "\x5a\x79", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5a\x7a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5a\x7b", "\x5a\x7c", "\x00\x00", "\x5a\x7d", "\x00\x00",
-  "\x5a\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x22",
-  "\x5b\x23", "\x00\x00", "\x5b\x24", "\x5b\x25", "\x5b\x26", "\x5b\x27",
-  "\x00\x00", "\x5b\x28", "\x5b\x29", "\x5b\x2a", "\x00\x00", "\x5b\x2b",
-  "\x00\x00", "\x00\x00", "\x5b\x2c", "\x00\x00", "\x5b\x2d", "\x5b\x2e",
-  "\x5b\x2f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x31", "\x00\x00", "\x00\x00",
-  "\x5b\x32", "\x5b\x33", "\x5b\x34", "\x00\x00", "\x5b\x35", "\x5b\x36",
-  "\x5b\x37", "\x5b\x38", "\x5b\x39", "\x5b\x3a", "\x5b\x3b", "\x5b\x3c",
-  "\x5b\x3d", "\x5b\x3e", "\x00\x00", "\x5b\x3f", "\x5b\x40", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x41", "\x00\x00", "\x00\x00", "\x5b\x42",
-  "\x00\x00", "\x5b\x43", "\x00\x00", "\x5b\x44", "\x5b\x45", "\x5b\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x47", "\x00\x00",
-  "\x5b\x48", "\x00\x00", "\x00\x00", "\x5b\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5b\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5b\x4b", "\x5b\x4c", "\x5b\x4d", "\x00\x00", "\x00\x00", "\x5b\x4e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x4f", "\x5b\x50", "\x5b\x51",
-  "\x00\x00", "\x5b\x52", "\x5b\x53", "\x5b\x54", "\x5b\x55", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x56", "\x5b\x57", "\x5b\x58", "\x00\x00",
-  "\x00\x00", "\x5b\x59", "\x5b\x5a", "\x00\x00", "\x5b\x5b", "\x00\x00",
-  "\x00\x00", "\x5b\x5c", "\x00\x00", "\x00\x00", "\x5b\x5d", "\x5b\x5e",
-  "\x5b\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5b\x60", "\x5b\x61", "\x00\x00", "\x5b\x62", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5b\x63", "\x00\x00", "\x5b\x64", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x65", "\x00\x00", "\x5b\x66", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x67", "\x00\x00", "\x5b\x68",
-  "\x00\x00", "\x5b\x69", "\x00\x00", "\x00\x00", "\x5b\x6a", "\x00\x00",
-  "\x00\x00", "\x5b\x6b", "\x5b\x6c", "\x5b\x6d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5b\x6e", "\x00\x00", "\x5b\x70", "\x5b\x71",
-  "\x5b\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x73", "\x5b\x6f",
-  "\x5b\x74", "\x5b\x75", "\x5b\x76", "\x00\x00", "\x5b\x77", "\x5b\x78",
-  "\x5b\x79", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5b\x7a",
-  "\x5b\x7b", "\x00\x00", "\x5b\x7c", "\x00\x00", "\x5b\x7d", "\x00\x00",
-  "\x00\x00", "\x5b\x7e", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x21", "\x00\x00", "\x5c\x22", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x23", "\x00\x00", "\x5c\x24", "\x00\x00", "\x5c\x25",
-  "\x00\x00", "\x00\x00", "\x5c\x26", "\x5c\x27", "\x5c\x28", "\x5c\x29",
-  "\x00\x00", "\x00\x00", "\x5c\x2a", "\x00\x00", "\x00\x00", "\x5c\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x2c", "\x5c\x2d", "\x00\x00",
-  "\x5c\x2e", "\x00\x00", "\x5c\x2f", "\x00\x00", "\x5c\x30", "\x00\x00",
-  "\x00\x00", "\x5c\x31", "\x5c\x32", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x34",
-  "\x5c\x35", "\x5c\x36", "\x00\x00", "\x5c\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5c\x38", "\x5c\x39", "\x00\x00", "\x5c\x3a",
-  "\x5c\x3b", "\x5c\x3c", "\x00\x00", "\x00\x00", "\x5c\x3d", "\x5c\x3e",
-  "\x5c\x3f", "\x00\x00", "\x5c\x40", "\x5c\x41", "\x00\x00", "\x00\x00",
-  "\x5c\x42", "\x5c\x43", "\x00\x00", "\x5c\x44", "\x5c\x45", "\x5c\x46",
-  "\x5c\x47", "\x5c\x48", "\x5c\x49", "\x00\x00", "\x00\x00", "\x5c\x4a",
-  "\x5c\x4b", "\x5c\x4c", "\x5c\x4d", "\x00\x00", "\x00\x00", "\x5c\x4e",
-  "\x5c\x4f", "\x5c\x50", "\x5c\x51", "\x5c\x52", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5c\x53", "\x00\x00", "\x5c\x54", "\x5c\x55", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x56", "\x5c\x57", "\x5c\x58",
-  "\x5c\x59", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5c\x5a", "\x5c\x5b", "\x00\x00", "\x5c\x5c", "\x5c\x5d", "\x5c\x5e",
-  "\x00\x00", "\x5c\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x61",
-  "\x5c\x62", "\x5c\x63", "\x5c\x64", "\x5c\x65", "\x5c\x66", "\x00\x00",
-  "\x00\x00", "\x5c\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x68",
-  "\x5c\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x6a", "\x00\x00",
-  "\x5c\x6b", "\x00\x00", "\x5c\x6c", "\x00\x00", "\x00\x00", "\x5c\x6d",
-  "\x5c\x6e", "\x00\x00", "\x00\x00", "\x5c\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x70", "\x00\x00", "\x00\x00",
-  "\x5c\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x72",
-  "\x00\x00", "\x00\x00", "\x5c\x73", "\x5c\x74", "\x5c\x75", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x76", "\x5c\x77", "\x5c\x78",
-  "\x5c\x79", "\x00\x00", "\x00\x00", "\x5c\x7a", "\x00\x00", "\x5c\x7b",
-  "\x00\x00", "\x00\x00", "\x5c\x7c", "\x00\x00", "\x5c\x7d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5c\x7e", "\x5d\x21", "\x5d\x22",
-  "\x5d\x23", "\x5d\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x25",
-  "\x00\x00", "\x00\x00", "\x5d\x26", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x27", "\x5d\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x29", "\x5d\x2a", "\x00\x00", "\x00\x00", "\x5d\x2b",
-  "\x5d\x2c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x2d",
-  "\x5d\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x2f", "\x5d\x30",
-  "\x5d\x31", "\x5d\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x33", "\x5d\x34", "\x5d\x35", "\x5d\x36", "\x5d\x37", "\x5d\x38",
-  "\x5d\x39", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x3a", "\x00\x00",
-  "\x5d\x3b", "\x00\x00", "\x5d\x3c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x3d", "\x00\x00", "\x5d\x3e", "\x00\x00", "\x00\x00", "\x5d\x3f",
-  "\x00\x00", "\x00\x00", "\x5d\x40", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x41", "\x00\x00", "\x5d\x42", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x43", "\x5d\x44", "\x00\x00", "\x5d\x45", "\x5d\x46",
-  "\x00\x00", "\x5d\x47", "\x5d\x48", "\x00\x00", "\x5d\x49", "\x5d\x4a",
-  "\x5d\x4b", "\x00\x00", "\x5d\x4c", "\x00\x00", "\x5d\x4d", "\x00\x00",
-  "\x5d\x4e", "\x00\x00", "\x5d\x4f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x50", "\x5d\x51", "\x00\x00", "\x00\x00", "\x5d\x52",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x53",
-  "\x00\x00", "\x5d\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x55", "\x5d\x56", "\x00\x00", "\x5d\x57", "\x00\x00",
-  "\x00\x00", "\x5d\x58", "\x00\x00", "\x5d\x59", "\x00\x00", "\x5d\x5a",
-  "\x00\x00", "\x5d\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x5c",
-  "\x5d\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x5e",
-  "\x00\x00", "\x00\x00", "\x5d\x5f", "\x5d\x60", "\x5d\x61", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x62", "\x5d\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5d\x64", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x65",
-  "\x00\x00", "\x5d\x66", "\x5d\x67", "\x5d\x68", "\x5d\x69", "\x00\x00",
-  "\x5d\x6a", "\x5d\x6b", "\x5d\x6c", "\x00\x00", "\x00\x00", "\x5d\x6d",
-  "\x5d\x6e", "\x5d\x6f", "\x00\x00", "\x00\x00", "\x5d\x70", "\x00\x00",
-  "\x00\x00", "\x5d\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5d\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x73", "\x5d\x74",
-  "\x00\x00", "\x5d\x75", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x76",
-  "\x5d\x77", "\x00\x00", "\x5d\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5d\x79", "\x5d\x7a", "\x00\x00", "\x5d\x7b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x7c", "\x5d\x7d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5d\x7e", "\x00\x00", "\x00\x00",
-  "\x5e\x21", "\x5e\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x23",
-  "\x00\x00", "\x00\x00", "\x5e\x24", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x25", "\x00\x00", "\x00\x00", "\x5e\x26", "\x00\x00",
-  "\x5e\x27", "\x5e\x28", "\x5e\x29", "\x5e\x2a", "\x00\x00", "\x5e\x2b",
-  "\x5e\x2c", "\x5e\x2d", "\x00\x00", "\x5e\x2e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x2f", "\x00\x00", "\x5e\x30",
-  "\x5e\x31", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x32", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5e\x33", "\x5e\x34", "\x5e\x35", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x36", "\x00\x00",
-  "\x00\x00", "\x5e\x37", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x38", "\x5e\x39", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5e\x3f", "\x5e\x3a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x3b", "\x5e\x3c", "\x00\x00", "\x5e\x3d", "\x5e\x3e",
-  "\x5e\x40", "\x00\x00", "\x00\x00", "\x5e\x41", "\x5e\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x43", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x44", "\x5e\x45", "\x5e\x46",
-  "\x5e\x47", "\x5e\x48", "\x00\x00", "\x5e\x49", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5e\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x4a", "\x5e\x4b", "\x5e\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5e\x4d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x4f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5e\x50", "\x5e\x51", "\x5e\x52", "\x00\x00", "\x5e\x53", "\x5e\x54",
-  "\x00\x00", "\x00\x00", "\x5e\x55", "\x00\x00", "\x5e\x56", "\x00\x00",
-  "\x00\x00", "\x5e\x57", "\x00\x00", "\x00\x00", "\x5e\x58", "\x5e\x59",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x5a",
-  "\x00\x00", "\x5e\x5b", "\x00\x00", "\x5e\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5e\x5d", "\x5e\x5e", "\x5e\x5f", "\x00\x00",
-  "\x5e\x60", "\x5e\x61", "\x5e\x62", "\x5e\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x64", "\x5e\x65", "\x5e\x66", "\x00\x00", "\x5e\x67",
-  "\x00\x00", "\x5e\x68", "\x00\x00", "\x5e\x69", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x6a", "\x00\x00", "\x5e\x6b", "\x00\x00", "\x5e\x6c",
-  "\x5e\x6d", "\x00\x00", "\x00\x00", "\x5e\x6e", "\x5e\x6f", "\x5e\x72",
-  "\x00\x00", "\x5e\x70", "\x00\x00", "\x5e\x71", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x73", "\x5e\x74", "\x00\x00",
-  "\x5e\x75", "\x00\x00", "\x5e\x76", "\x5e\x77", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x78", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5e\x79", "\x00\x00", "\x5e\x7a", "\x5e\x7b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5e\x7c", "\x00\x00", "\x00\x00",
-  "\x5e\x7d", "\x5e\x7e", "\x5f\x21", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x23",
-  "\x00\x00", "\x5f\x24", "\x5f\x25", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x26", "\x00\x00", "\x5f\x27", "\x5f\x28",
-  "\x5f\x29", "\x5f\x2a", "\x5f\x2b", "\x5f\x2c", "\x5f\x2d", "\x00\x00",
-  "\x00\x00", "\x5f\x2e", "\x00\x00", "\x5f\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x32", "\x5f\x31", "\x00\x00", "\x00\x00", "\x5f\x33",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x34", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x35", "\x5f\x36", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x37", "\x00\x00", "\x00\x00", "\x5f\x38", "\x5f\x39", "\x00\x00",
-  "\x5f\x3a", "\x00\x00", "\x00\x00", "\x5f\x3b", "\x00\x00", "\x5f\x3c",
-  "\x5f\x3d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x3e", "\x5f\x3f", "\x00\x00", "\x5f\x40", "\x00\x00", "\x5f\x41",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x42",
-  "\x5f\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x44",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x45", "\x5f\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x47", "\x00\x00", "\x00\x00", "\x5f\x48",
-  "\x00\x00", "\x5f\x49", "\x5f\x4a", "\x00\x00", "\x00\x00", "\x5f\x4b",
-  "\x00\x00", "\x5f\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x4d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x4e", "\x00\x00",
-  "\x00\x00", "\x5f\x4f", "\x5f\x50", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x5f\x51", "\x5f\x52", "\x5f\x53", "\x5f\x54", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x55", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x56", "\x5f\x57", "\x00\x00", "\x00\x00",
-  "\x5f\x58", "\x00\x00", "\x00\x00", "\x5f\x59", "\x00\x00", "\x00\x00",
-  "\x5f\x5a", "\x00\x00", "\x5f\x5b", "\x00\x00", "\x5f\x5c", "\x00\x00",
-  "\x5f\x5d", "\x5f\x6f", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x5e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x5f", "\x5f\x60",
-  "\x5f\x61", "\x5f\x62", "\x00\x00", "\x5f\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x64", "\x00\x00", "\x00\x00", "\x5f\x65", "\x00\x00",
-  "\x00\x00", "\x5f\x66", "\x5f\x67", "\x00\x00", "\x5f\x68", "\x00\x00",
-  "\x5f\x69", "\x5f\x6a", "\x5f\x6b", "\x00\x00", "\x5f\x6c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x6d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x5f\x6e", "\x5f\x70", "\x5f\x71", "\x00\x00", "\x5f\x72",
-  "\x5f\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x5f\x74", "\x00\x00",
-  "\x00\x00", "\x5f\x75", "\x5f\x76", "\x5f\x77", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x78", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x5f\x79", "\x00\x00", "\x00\x00", "\x5f\x7a",
-  "\x00\x00", "\x5f\x7b", "\x5f\x7c", "\x5f\x7d", "\x5f\x7e", "\x60\x21",
-  "\x00\x00", "\x00\x00", "\x60\x22", "\x60\x23", "\x60\x24", "\x00\x00",
-  "\x60\x25", "\x00\x00", "\x00\x00", "\x60\x26", "\x60\x27", "\x60\x28",
-  "\x60\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x2a", "\x00\x00",
-  "\x00\x00", "\x60\x2b", "\x60\x2c", "\x60\x2d", "\x00\x00", "\x60\x2e",
-  "\x60\x2f", "\x60\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x60\x31", "\x60\x32", "\x60\x33", "\x60\x34", "\x60\x35", "\x00\x00",
-  "\x00\x00", "\x60\x36", "\x60\x37", "\x60\x38", "\x00\x00", "\x00\x00",
-  "\x60\x39", "\x60\x3a", "\x00\x00", "\x60\x3b", "\x60\x3c", "\x60\x3d",
-  "\x60\x3e", "\x60\x3f", "\x60\x40", "\x60\x41", "\x60\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x43", "\x60\x44",
-  "\x00\x00", "\x60\x45", "\x00\x00", "\x00\x00", "\x60\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x47", "\x60\x48", "\x00\x00",
-  "\x60\x49", "\x60\x4a", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x4c", "\x00\x00",
-  "\x60\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x4e", "\x60\x4f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x50", "\x00\x00",
-  "\x60\x51", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x52",
-  "\x60\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x54",
-  "\x60\x55", "\x00\x00", "\x60\x56", "\x60\x57", "\x00\x00", "\x00\x00",
-  "\x60\x58", "\x60\x59", "\x00\x00", "\x60\x5a", "\x00\x00", "\x00\x00",
-  "\x60\x5b", "\x60\x5c", "\x60\x5d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x60\x64", "\x60\x5e", "\x00\x00", "\x60\x5f", "\x60\x60",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x61",
-  "\x00\x00", "\x60\x62", "\x60\x63", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x65", "\x00\x00", "\x60\x66", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x67", "\x60\x68", "\x60\x69",
-  "\x60\x6a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x60\x6b", "\x60\x6c", "\x60\x6d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x60\x6e", "\x00\x00", "\x60\x6f", "\x60\x70",
-  "\x00\x00", "\x60\x71", "\x00\x00", "\x60\x72", "\x00\x00", "\x60\x73",
-  "\x60\x74", "\x00\x00", "\x00\x00", "\x00\x00", "\x60\x75", "\x60\x76",
-  "\x60\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x60\x78", "\x60\x79", "\x60\x7a", "\x60\x7b", "\x00\x00", "\x00\x00",
-  "\x60\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x60\x7d", "\x60\x7e", "\x00\x00", "\x61\x21", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x22", "\x61\x23", "\x00\x00", "\x61\x24", "\x61\x25",
-  "\x61\x26", "\x61\x27", "\x61\x28", "\x00\x00", "\x00\x00", "\x61\x29",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x2a", "\x61\x2b",
-  "\x61\x2c", "\x61\x2d", "\x00\x00", "\x00\x00", "\x61\x2e", "\x61\x2f",
-  "\x00\x00", "\x00\x00", "\x61\x30", "\x61\x31", "\x61\x32", "\x61\x33",
-  "\x61\x34", "\x00\x00", "\x61\x35", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x36", "\x00\x00", "\x61\x37", "\x61\x38",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x3a", "\x61\x3b", "\x00\x00", "\x61\x3c",
-  "\x00\x00", "\x00\x00", "\x61\x3d", "\x00\x00", "\x61\x3e", "\x61\x3f",
-  "\x00\x00", "\x61\x40", "\x61\x41", "\x00\x00", "\x00\x00", "\x61\x42",
-  "\x61\x43", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x44", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x45", "\x00\x00",
-  "\x00\x00", "\x61\x46", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x47",
-  "\x61\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x49",
-  "\x00\x00", "\x00\x00", "\x61\x4a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x61\x4b", "\x00\x00", "\x61\x4c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x61\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x4e", "\x61\x4f",
-  "\x00\x00", "\x00\x00", "\x61\x50", "\x61\x51", "\x61\x52", "\x61\x54",
-  "\x00\x00", "\x61\x55", "\x61\x56", "\x00\x00", "\x61\x53", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x57", "\x61\x58", "\x00\x00", "\x00\x00",
-  "\x61\x59", "\x61\x5a", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x5b",
-  "\x61\x5c", "\x61\x5d", "\x61\x5e", "\x00\x00", "\x61\x5f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x61", "\x61\x62", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x64",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x65", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x61\x66", "\x61\x67", "\x00\x00", "\x00\x00",
-  "\x61\x68", "\x00\x00", "\x00\x00", "\x61\x69", "\x61\x6a", "\x00\x00",
-  "\x61\x6b", "\x00\x00", "\x61\x6c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x6d", "\x00\x00", "\x61\x6e", "\x61\x6f", "\x61\x70",
-  "\x00\x00", "\x61\x71", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x61\x72", "\x61\x73", "\x61\x74", "\x00\x00", "\x00\x00", "\x61\x75",
-  "\x61\x76", "\x00\x00", "\x61\x77", "\x61\x78", "\x61\x79", "\x00\x00",
-  "\x61\x7a", "\x61\x7b", "\x61\x7d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x61\x7e", "\x62\x21", "\x62\x22", "\x00\x00", "\x62\x23",
-  "\x62\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x61\x7c", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x2d", "\x00\x00",
-  "\x00\x00", "\x62\x25", "\x00\x00", "\x62\x26", "\x62\x27", "\x62\x28",
-  "\x00\x00", "\x00\x00", "\x62\x29", "\x62\x2a", "\x00\x00", "\x62\x2b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x2c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x30", "\x62\x31", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x32", "\x00\x00", "\x62\x2e", "\x62\x33",
-  "\x62\x34", "\x62\x35", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x36",
-  "\x62\x37", "\x62\x38", "\x00\x00", "\x62\x39", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x3a", "\x00\x00", "\x00\x00", "\x62\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x3c", "\x00\x00", "\x62\x3d",
-  "\x62\x3e", "\x62\x3f", "\x00\x00", "\x62\x40", "\x00\x00", "\x62\x41",
-  "\x00\x00", "\x62\x42", "\x00\x00", "\x62\x43", "\x00\x00", "\x62\x45",
-  "\x62\x46", "\x00\x00", "\x62\x44", "\x00\x00", "\x62\x47", "\x00\x00",
-  "\x62\x48", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x49",
-  "\x62\x4a", "\x00\x00", "\x62\x4b", "\x00\x00", "\x00\x00", "\x62\x4c",
-  "\x00\x00", "\x62\x4d", "\x62\x4e", "\x00\x00", "\x62\x4f", "\x62\x50",
-  "\x00\x00", "\x62\x51", "\x62\x52", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x53", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x54", "\x62\x55", "\x62\x56", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x62\x57", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x58", "\x00\x00",
-  "\x62\x59", "\x62\x5a", "\x62\x5b", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x5c", "\x00\x00", "\x00\x00", "\x62\x5d",
-  "\x00\x00", "\x00\x00", "\x62\x5e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x5f", "\x62\x60", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x61", "\x62\x62", "\x62\x63", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x64", "\x00\x00",
-  "\x62\x65", "\x00\x00", "\x62\x66", "\x62\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x62\x68", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x69",
-  "\x00\x00", "\x00\x00", "\x62\x6a", "\x00\x00", "\x62\x6b", "\x62\x6c",
-  "\x62\x6d", "\x00\x00", "\x00\x00", "\x62\x6e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x6f", "\x00\x00", "\x00\x00",
-  "\x62\x70", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x71",
-  "\x00\x00", "\x62\x72", "\x00\x00", "\x00\x00", "\x00\x00", "\x62\x73",
-  "\x62\x74", "\x62\x75", "\x00\x00", "\x62\x76", "\x62\x77", "\x62\x78",
-  "\x62\x79", "\x00\x00", "\x00\x00", "\x62\x7a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x62\x7b", "\x62\x7c", "\x62\x7d", "\x00\x00",
-  "\x62\x7e", "\x00\x00", "\x00\x00", "\x63\x21", "\x63\x22", "\x00\x00",
-  "\x63\x23", "\x63\x24", "\x63\x25", "\x00\x00", "\x00\x00", "\x63\x26",
-  "\x00\x00", "\x63\x27", "\x63\x28", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x29", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x2a", "\x63\x2b", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x2c",
-  "\x63\x2d", "\x00\x00", "\x63\x2e", "\x63\x2f", "\x63\x30", "\x63\x31",
-  "\x63\x32", "\x63\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x34", "\x00\x00", "\x63\x35", "\x00\x00", "\x63\x36",
-  "\x00\x00", "\x63\x37", "\x00\x00", "\x00\x00", "\x63\x38", "\x63\x39",
-  "\x00\x00", "\x00\x00", "\x63\x3a", "\x63\x3b", "\x63\x3c", "\x63\x3d",
-  "\x00\x00", "\x63\x3e", "\x63\x3f", "\x00\x00", "\x63\x40", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x63\x41", "\x00\x00", "\x63\x42", "\x63\x43",
-  "\x00\x00", "\x00\x00", "\x63\x44", "\x00\x00", "\x63\x45", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x63\x46", "\x63\x47", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x48", "\x63\x49", "\x63\x4a",
-  "\x63\x4b", "\x00\x00", "\x63\x4c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x63\x4d", "\x63\x4e", "\x63\x4f", "\x00\x00",
-  "\x00\x00", "\x63\x50", "\x00\x00", "\x63\x51", "\x63\x52", "\x00\x00",
-  "\x63\x53", "\x63\x54", "\x63\x55", "\x00\x00", "\x63\x56", "\x00\x00",
-  "\x63\x57", "\x00\x00", "\x63\x58", "\x00\x00", "\x63\x59", "\x63\x5a",
-  "\x00\x00", "\x00\x00", "\x63\x5b", "\x63\x5c", "\x00\x00", "\x00\x00",
-  "\x63\x5d", "\x00\x00", "\x00\x00", "\x63\x5e", "\x63\x5f", "\x63\x60",
-  "\x00\x00", "\x63\x61", "\x63\x62", "\x63\x63", "\x00\x00", "\x00\x00",
-  "\x63\x64", "\x63\x65", "\x00\x00", "\x00\x00", "\x63\x66", "\x63\x67",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x68", "\x00\x00", "\x63\x69",
-  "\x63\x6a", "\x63\x6b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x63\x6c", "\x63\x6d", "\x63\x6e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x63\x6f", "\x63\x70", "\x63\x71", "\x63\x72", "\x63\x73",
-  "\x00\x00", "\x63\x74", "\x63\x75", "\x63\x76", "\x00\x00", "\x63\x77",
-  "\x63\x78", "\x63\x79", "\x63\x7a", "\x00\x00", "\x00\x00", "\x63\x7b",
-  "\x63\x7c", "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x7d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x63\x7e", "\x00\x00", "\x64\x21",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x22",
-  "\x64\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x24", "\x64\x25",
-  "\x00\x00", "\x64\x26", "\x64\x27", "\x00\x00", "\x00\x00", "\x64\x28",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x29", "\x00\x00", "\x00\x00",
-  "\x64\x2a", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x2b", "\x00\x00",
-  "\x64\x2c", "\x00\x00", "\x64\x2d", "\x64\x2e", "\x64\x2f", "\x64\x30",
-  "\x00\x00", "\x64\x31", "\x64\x32", "\x64\x33", "\x64\x34", "\x64\x35",
-  "\x00\x00", "\x64\x36", "\x64\x37", "\x64\x38", "\x64\x39", "\x00\x00",
-  "\x00\x00", "\x64\x3a", "\x64\x3b", "\x64\x3c", "\x64\x3d", "\x00\x00",
-  "\x64\x3e", "\x00\x00", "\x00\x00", "\x64\x3f", "\x00\x00", "\x64\x40",
-  "\x00\x00", "\x64\x41", "\x64\x42", "\x64\x43", "\x00\x00", "\x00\x00",
-  "\x64\x44", "\x64\x45", "\x00\x00", "\x64\x46", "\x64\x47", "\x64\x48",
-  "\x00\x00", "\x64\x49", "\x00\x00", "\x64\x4a", "\x00\x00", "\x64\x4b",
-  "\x64\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x4d", "\x00\x00",
-  "\x64\x4e", "\x00\x00", "\x64\x4f", "\x64\x50", "\x00\x00", "\x64\x51",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x52", "\x64\x53", "\x00\x00",
-  "\x64\x54", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x64\x55", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x56",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x57", "\x00\x00", "\x00\x00",
-  "\x64\x58", "\x64\x59", "\x64\x5a", "\x64\x5b", "\x64\x5c", "\x64\x5d",
-  "\x00\x00", "\x64\x5e", "\x00\x00", "\x00\x00", "\x64\x5f", "\x64\x60",
-  "\x00\x00", "\x64\x61", "\x00\x00", "\x64\x62", "\x64\x63", "\x64\x64",
-  "\x64\x65", "\x00\x00", "\x64\x66", "\x64\x67", "\x64\x68", "\x64\x69",
-  "\x64\x6a", "\x64\x6b", "\x64\x6c", "\x64\x6d", "\x00\x00", "\x00\x00",
-  "\x64\x6e", "\x00\x00", "\x64\x6f", "\x64\x70", "\x00\x00", "\x64\x71",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x72", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x64\x73", "\x64\x74", "\x00\x00",
-  "\x64\x75", "\x00\x00", "\x64\x76", "\x64\x77", "\x00\x00", "\x00\x00",
-  "\x64\x78", "\x00\x00", "\x64\x79", "\x64\x7a", "\x64\x7b", "\x00\x00",
-  "\x64\x7c", "\x64\x7d", "\x00\x00", "\x64\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x65\x21", "\x00\x00", "\x00\x00", "\x65\x22", "\x00\x00",
-  "\x65\x23", "\x65\x24", "\x65\x25", "\x65\x26", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x27", "\x00\x00", "\x65\x28",
-  "\x65\x29", "\x00\x00", "\x65\x2a", "\x00\x00", "\x65\x2b", "\x00\x00",
-  "\x00\x00", "\x65\x2c", "\x00\x00", "\x00\x00", "\x65\x2d", "\x00\x00",
-  "\x00\x00", "\x65\x2e", "\x00\x00", "\x00\x00", "\x65\x2f", "\x00\x00",
-  "\x00\x00", "\x65\x30", "\x00\x00", "\x00\x00", "\x65\x31", "\x00\x00",
-  "\x65\x32", "\x65\x33", "\x00\x00", "\x65\x34", "\x00\x00", "\x65\x35",
-  "\x65\x3b", "\x00\x00", "\x65\x36", "\x65\x37", "\x65\x38", "\x65\x39",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x3a", "\x65\x3c", "\x00\x00",
-  "\x00\x00", "\x65\x3d", "\x65\x3e", "\x65\x3f", "\x65\x40", "\x00\x00",
-  "\x65\x41", "\x65\x42", "\x65\x43", "\x65\x44", "\x65\x45", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x46", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x47", "\x00\x00",
-  "\x00\x00", "\x65\x48", "\x00\x00", "\x65\x49", "\x65\x4a", "\x00\x00",
-  "\x00\x00", "\x65\x4b", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x4c",
-  "\x65\x4d", "\x65\x4f", "\x65\x50", "\x65\x4e", "\x65\x51", "\x65\x52",
-  "\x00\x00", "\x65\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x54",
-  "\x65\x55", "\x00\x00", "\x65\x56", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x65\x57", "\x65\x58", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x59",
-  "\x65\x5a", "\x65\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x65\x5c", "\x65\x5d", "\x65\x5e", "\x65\x5f", "\x65\x60",
-  "\x65\x61", "\x00\x00", "\x65\x62", "\x65\x63", "\x65\x64", "\x65\x65",
-  "\x65\x66", "\x00\x00", "\x65\x68", "\x00\x00", "\x65\x67", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x65\x69", "\x00\x00", "\x65\x6a", "\x00\x00",
-  "\x00\x00", "\x65\x6b", "\x00\x00", "\x65\x6c", "\x00\x00", "\x65\x6d",
-  "\x65\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x65\x6f", "\x00\x00",
-  "\x00\x00", "\x65\x70", "\x00\x00", "\x00\x00", "\x65\x71", "\x00\x00",
-  "\x65\x72", "\x00\x00", "\x65\x73", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x65\x74", "\x00\x00", "\x00\x00", "\x65\x75", "\x00\x00",
-  "\x65\x76", "\x65\x77", "\x65\x78", "\x00\x00", "\x65\x79", "\x65\x7a",
-  "\x65\x7c", "\x65\x7b", "\x65\x7d", "\x65\x7e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x21", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x22", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x23", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x24", "\x66\x25",
-  "\x66\x26", "\x66\x27", "\x66\x28", "\x66\x29", "\x00\x00", "\x66\x2a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x2b", "\x00\x00",
-  "\x00\x00", "\x66\x2c", "\x00\x00", "\x66\x2d", "\x66\x2e", "\x66\x2f",
-  "\x00\x00", "\x66\x30", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x31",
-  "\x00\x00", "\x00\x00", "\x66\x32", "\x00\x00", "\x66\x33", "\x66\x34",
-  "\x00\x00", "\x66\x35", "\x66\x36", "\x00\x00", "\x66\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x38", "\x66\x39", "\x66\x3a",
-  "\x66\x3b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x3c", "\x66\x3d", "\x00\x00", "\x00\x00", "\x66\x3e", "\x66\x3f",
-  "\x66\x40", "\x66\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x42",
-  "\x00\x00", "\x66\x43", "\x66\x44", "\x66\x45", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x66\x46", "\x00\x00", "\x66\x47", "\x66\x48", "\x66\x49",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x4a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x4b", "\x00\x00",
-  "\x66\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x4d", "\x66\x4e",
-  "\x66\x4f", "\x66\x50", "\x00\x00", "\x66\x51", "\x66\x52", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x53", "\x66\x54", "\x00\x00", "\x66\x55",
-  "\x00\x00", "\x66\x56", "\x66\x57", "\x66\x58", "\x66\x59", "\x66\x5a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x5b",
-  "\x66\x5c", "\x66\x5d", "\x00\x00", "\x66\x5e", "\x66\x5f", "\x00\x00",
-  "\x66\x60", "\x66\x61", "\x66\x62", "\x66\x63", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x64", "\x66\x65", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x66", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x67", "\x00\x00", "\x00\x00", "\x66\x68", "\x00\x00", "\x66\x69",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x6a", "\x66\x6b",
-  "\x66\x6c", "\x00\x00", "\x00\x00", "\x66\x6d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x66\x6e", "\x66\x6f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x66\x70", "\x66\x71", "\x66\x72", "\x66\x73", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x66\x75", "\x00\x00",
-  "\x66\x76", "\x00\x00", "\x00\x00", "\x66\x77", "\x66\x78", "\x66\x79",
-  "\x66\x7a", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x66\x7b", "\x00\x00", "\x66\x7c", "\x66\x7d", "\x66\x7e", "\x67\x21",
-  "\x00\x00", "\x67\x22", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x23",
-  "\x67\x24", "\x67\x25", "\x00\x00", "\x67\x26", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x27", "\x67\x28", "\x67\x29", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x67\x2a", "\x67\x2b", "\x00\x00", "\x67\x2c",
-  "\x67\x2d", "\x00\x00", "\x67\x2e", "\x67\x2f", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x30", "\x67\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x67\x32", "\x00\x00", "\x67\x33", "\x67\x34",
-  "\x00\x00", "\x67\x35", "\x67\x36", "\x67\x37", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x38", "\x00\x00", "\x00\x00", "\x67\x39", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x67\x3a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x3b", "\x00\x00", "\x00\x00", "\x67\x3c", "\x67\x3d",
-  "\x67\x3e", "\x00\x00", "\x00\x00", "\x67\x3f", "\x00\x00", "\x67\x40",
-  "\x00\x00", "\x67\x41", "\x67\x42", "\x67\x43", "\x67\x44", "\x67\x45",
-  "\x67\x46", "\x00\x00", "\x67\x47", "\x67\x48", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x67\x49", "\x67\x4a", "\x00\x00", "\x00\x00", "\x67\x4b",
-  "\x67\x4c", "\x00\x00", "\x67\x4d", "\x00\x00", "\x00\x00", "\x67\x4e",
-  "\x67\x4f", "\x00\x00", "\x00\x00", "\x67\x50", "\x67\x51", "\x00\x00",
-  "\x67\x52", "\x67\x53", "\x67\x54", "\x00\x00", "\x67\x55", "\x00\x00",
-  "\x67\x56", "\x67\x57", "\x00\x00", "\x67\x58", "\x00\x00", "\x00\x00",
-  "\x67\x59", "\x67\x5a", "\x00\x00", "\x67\x5b", "\x00\x00", "\x67\x5c",
-  "\x67\x5d", "\x00\x00", "\x67\x5e", "\x67\x5f", "\x67\x60", "\x00\x00",
-  "\x67\x61", "\x67\x62", "\x00\x00", "\x00\x00", "\x67\x63", "\x00\x00",
-  "\x00\x00", "\x67\x64", "\x67\x65", "\x67\x66", "\x00\x00", "\x67\x6a",
-  "\x00\x00", "\x67\x67", "\x67\x68", "\x00\x00", "\x67\x69", "\x67\x6b",
-  "\x00\x00", "\x00\x00", "\x67\x6c", "\x67\x6d", "\x00\x00", "\x67\x6e",
-  "\x00\x00", "\x00\x00", "\x67\x6f", "\x00\x00", "\x00\x00", "\x67\x70",
-  "\x67\x71", "\x00\x00", "\x67\x72", "\x67\x73", "\x00\x00", "\x00\x00",
-  "\x67\x74", "\x00\x00", "\x00\x00", "\x67\x76", "\x67\x77", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x67\x78", "\x00\x00",
-  "\x67\x79", "\x00\x00", "\x00\x00", "\x67\x75", "\x00\x00", "\x00\x00",
-  "\x67\x7a", "\x00\x00", "\x67\x7b", "\x00\x00", "\x67\x7c", "\x00\x00",
-  "\x00\x00", "\x67\x7d", "\x00\x00", "\x68\x28", "\x67\x7e", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x21", "\x00\x00", "\x00\x00",
-  "\x68\x22", "\x68\x23", "\x68\x24", "\x00\x00", "\x68\x25", "\x68\x26",
-  "\x00\x00", "\x68\x27", "\x68\x29", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x2a", "\x00\x00", "\x00\x00", "\x68\x2b",
-  "\x00\x00", "\x00\x00", "\x68\x2c", "\x68\x2d", "\x68\x2e", "\x68\x2f",
-  "\x00\x00", "\x00\x00", "\x68\x30", "\x68\x31", "\x00\x00", "\x68\x32",
-  "\x68\x33", "\x68\x34", "\x68\x35", "\x00\x00", "\x68\x36", "\x68\x37",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x38", "\x00\x00", "\x68\x39",
-  "\x68\x3a", "\x00\x00", "\x68\x3b", "\x68\x3c", "\x00\x00", "\x68\x3d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x3e", "\x00\x00", "\x00\x00",
-  "\x68\x3f", "\x68\x40", "\x00\x00", "\x68\x41", "\x68\x42", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x43", "\x00\x00", "\x00\x00", "\x68\x44",
-  "\x00\x00", "\x00\x00", "\x68\x45", "\x00\x00", "\x00\x00", "\x68\x46",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x47", "\x68\x48", "\x00\x00",
-  "\x68\x49", "\x00\x00", "\x68\x4a", "\x68\x4b", "\x68\x4c", "\x00\x00",
-  "\x00\x00", "\x68\x4d", "\x68\x4e", "\x00\x00", "\x00\x00", "\x68\x4f",
-  "\x68\x50", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x51",
-  "\x68\x52", "\x68\x53", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x54",
-  "\x68\x55", "\x68\x56", "\x00\x00", "\x00\x00", "\x68\x57", "\x68\x58",
-  "\x68\x59", "\x00\x00", "\x00\x00", "\x68\x5a", "\x00\x00", "\x00\x00",
-  "\x68\x5b", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x5c", "\x68\x5d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x5e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x5f", "\x68\x60", "\x68\x61",
-  "\x68\x62", "\x68\x63", "\x00\x00", "\x00\x00", "\x00\x00", "\x68\x64",
-  "\x68\x65", "\x68\x66", "\x68\x67", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x68\x68", "\x68\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x68\x6a", "\x68\x6b", "\x68\x6c", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x68\x6d", "\x68\x6e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x68\x6f", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x68\x70", "\x68\x71", "\x00\x00", "\x68\x72", "\x68\x73", "\x00\x00",
-  "\x68\x74", "\x68\x75", "\x68\x76", "\x68\x77", "\x00\x00", "\x68\x78",
-  "\x00\x00", "\x68\x79", "\x68\x7a", "\x68\x7b", "\x68\x7c", "\x68\x7d",
-  "\x00\x00", "\x00\x00", "\x68\x7e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x21", "\x69\x22", "\x00\x00", "\x00\x00", "\x69\x23", "\x00\x00",
-  "\x69\x24", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x25", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x26", "\x69\x27",
-  "\x69\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x29",
-  "\x69\x2a", "\x00\x00", "\x69\x2b", "\x00\x00", "\x69\x2c", "\x69\x2d",
-  "\x00\x00", "\x00\x00", "\x69\x2e", "\x69\x2f", "\x69\x30", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x31", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x69\x32", "\x69\x33", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x34",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x35", "\x69\x36", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x37", "\x69\x38", "\x69\x39", "\x69\x3a",
-  "\x69\x3b", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x3c", "\x69\x3d",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x3e", "\x69\x3f",
-  "\x00\x00", "\x69\x40", "\x00\x00", "\x69\x41", "\x69\x42", "\x69\x43",
-  "\x00\x00", "\x00\x00", "\x69\x44", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x45", "\x69\x46", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x47", "\x00\x00", "\x69\x48", "\x69\x49",
-  "\x00\x00", "\x69\x4a", "\x69\x4c", "\x00\x00", "\x00\x00", "\x69\x4d",
-  "\x00\x00", "\x00\x00", "\x69\x4b", "\x00\x00", "\x00\x00", "\x69\x4e",
-  "\x69\x4f", "\x69\x50", "\x00\x00", "\x69\x51", "\x00\x00", "\x00\x00",
-  "\x69\x52", "\x00\x00", "\x00\x00", "\x69\x53", "\x00\x00", "\x69\x54",
-  "\x69\x55", "\x69\x56", "\x00\x00", "\x69\x57", "\x00\x00", "\x69\x58",
-  "\x69\x59", "\x00\x00", "\x00\x00", "\x69\x5a", "\x00\x00", "\x69\x5b",
-  "\x69\x5c", "\x69\x5d", "\x00\x00", "\x00\x00", "\x69\x5e", "\x00\x00",
-  "\x69\x5f", "\x00\x00", "\x00\x00", "\x69\x60", "\x69\x61", "\x00\x00",
-  "\x69\x62", "\x00\x00", "\x69\x63", "\x00\x00", "\x00\x00", "\x69\x64",
-  "\x00\x00", "\x69\x65", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x66", "\x00\x00", "\x69\x67", "\x00\x00", "\x69\x68",
-  "\x00\x00", "\x00\x00", "\x69\x69", "\x69\x6a", "\x69\x6b", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x6c", "\x69\x6d", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x6e", "\x00\x00", "\x00\x00", "\x00\x00", "\x69\x6f",
-  "\x69\x70", "\x00\x00", "\x69\x71", "\x00\x00", "\x69\x72", "\x00\x00",
-  "\x00\x00", "\x69\x73", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x69\x74", "\x69\x75", "\x00\x00", "\x69\x76", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x69\x77", "\x69\x78", "\x00\x00", "\x00\x00",
-  "\x69\x79", "\x00\x00", "\x69\x7a", "\x69\x7b", "\x69\x7c", "\x69\x7d",
-  "\x69\x7e", "\x6a\x21", "\x6a\x22", "\x00\x00", "\x00\x00", "\x6a\x23",
-  "\x6a\x24", "\x00\x00", "\x6a\x25", "\x6a\x26", "\x6a\x27", "\x6a\x28",
-  "\x00\x00", "\x6a\x29", "\x00\x00", "\x6a\x2a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6a\x2b", "\x00\x00", "\x00\x00", "\x6a\x2c", "\x00\x00",
-  "\x6a\x2d", "\x6a\x2e", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x2f",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x30",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x31", "\x00\x00",
-  "\x6a\x32", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6a\x33", "\x6a\x34", "\x6a\x35", "\x00\x00", "\x6a\x36", "\x00\x00",
-  "\x6a\x37", "\x6a\x38", "\x00\x00", "\x00\x00", "\x6a\x39", "\x6a\x3a",
-  "\x00\x00", "\x00\x00", "\x6a\x3b", "\x6a\x3c", "\x6a\x3d", "\x6a\x3e",
-  "\x6a\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x40", "\x00\x00",
-  "\x00\x00", "\x6a\x41", "\x00\x00", "\x00\x00", "\x6a\x42", "\x00\x00",
-  "\x6a\x43", "\x00\x00", "\x6a\x44", "\x6a\x45", "\x00\x00", "\x6a\x46",
-  "\x00\x00", "\x6a\x47", "\x6a\x48", "\x6a\x49", "\x6a\x4a", "\x6a\x4b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x4c", "\x00\x00",
-  "\x6a\x4d", "\x00\x00", "\x6a\x4e", "\x6a\x4f", "\x6a\x50", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x51", "\x6a\x52",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x53", "\x6a\x54", "\x6a\x55",
-  "\x6a\x56", "\x00\x00", "\x6a\x57", "\x6a\x58", "\x6a\x59", "\x00\x00",
-  "\x6a\x5a", "\x00\x00", "\x6a\x5b", "\x6a\x5c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6a\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6a\x5e", "\x00\x00", "\x00\x00", "\x6a\x5f", "\x6a\x60",
-  "\x6a\x61", "\x6a\x62", "\x00\x00", "\x6a\x63", "\x00\x00", "\x00\x00",
-  "\x6a\x64", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x65", "\x6a\x66",
-  "\x6a\x67", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x68",
-  "\x6a\x69", "\x00\x00", "\x00\x00", "\x6a\x6a", "\x6a\x6b", "\x00\x00",
-  "\x6a\x6c", "\x6a\x6d", "\x00\x00", "\x6a\x6e", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x6f", "\x6a\x70", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x71", "\x00\x00",
-  "\x6a\x72", "\x6a\x73", "\x6a\x74", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6a\x75", "\x00\x00", "\x6a\x76", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x77", "\x00\x00", "\x6a\x78",
-  "\x00\x00", "\x00\x00", "\x6a\x79", "\x6a\x7a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6a\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x7c",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6a\x7d", "\x6a\x7e", "\x6b\x21",
-  "\x6b\x22", "\x00\x00", "\x00\x00", "\x6b\x23", "\x00\x00", "\x6b\x24",
-  "\x6b\x25", "\x00\x00", "\x6b\x26", "\x6b\x27", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x28", "\x00\x00", "\x6b\x29", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x2a", "\x00\x00", "\x6b\x2b", "\x6b\x2c",
-  "\x6b\x2d", "\x00\x00", "\x6b\x2e", "\x00\x00", "\x6b\x2f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x30", "\x6b\x31", "\x00\x00", "\x00\x00",
-  "\x6b\x32", "\x6b\x33", "\x6b\x34", "\x6b\x35", "\x6b\x36", "\x6b\x37",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x38", "\x6b\x39", "\x6b\x3a",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x3b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x3c", "\x00\x00", "\x6b\x3d",
-  "\x6b\x3e", "\x6b\x3f", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x40",
-  "\x6b\x41", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x42", "\x6b\x43",
-  "\x6b\x44", "\x00\x00", "\x00\x00", "\x6b\x45", "\x6b\x46", "\x00\x00",
-  "\x6b\x47", "\x00\x00", "\x6b\x48", "\x00\x00", "\x00\x00", "\x6b\x49",
-  "\x6b\x50", "\x6b\x4a", "\x6b\x4b", "\x6b\x4c", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x52", "\x6b\x4e", "\x6b\x4f", "\x6b\x51", "\x00\x00", "\x00\x00",
-  "\x6b\x53", "\x00\x00", "\x6b\x54", "\x00\x00", "\x6b\x55", "\x00\x00",
-  "\x00\x00", "\x6b\x56", "\x00\x00", "\x6b\x57", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x58", "\x6b\x59", "\x6b\x5a", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6b\x5b", "\x00\x00", "\x6b\x5c", "\x6b\x5e",
-  "\x6b\x5d", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x5f", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x60", "\x6b\x61", "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x62",
-  "\x6b\x63", "\x6b\x64", "\x6b\x65", "\x6b\x66", "\x00\x00", "\x6b\x67",
-  "\x6b\x68", "\x6b\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x6a", "\x00\x00", "\x6b\x6b", "\x6b\x6d", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6b\x6e", "\x6b\x6f", "\x00\x00",
-  "\x6b\x6c", "\x00\x00", "\x6b\x70", "\x00\x00", "\x00\x00", "\x6b\x71",
-  "\x6b\x72", "\x6b\x73", "\x6b\x74", "\x00\x00", "\x00\x00", "\x6b\x76",
-  "\x6b\x75", "\x00\x00", "\x6b\x77", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x78", "\x6b\x79", "\x6b\x7a", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x7b", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6b\x7c", "\x6b\x7d", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6b\x7e", "\x6c\x21", "\x00\x00", "\x6c\x22", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x23", "\x6c\x24", "\x00\x00", "\x6c\x25",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x26", "\x00\x00", "\x00\x00",
-  "\x6c\x27", "\x6c\x28", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x29",
-  "\x6c\x2a", "\x00\x00", "\x6c\x2b", "\x6c\x2c", "\x6c\x2d", "\x6c\x2e",
-  "\x6c\x2f", "\x6c\x30", "\x00\x00", "\x6c\x31", "\x00\x00", "\x6c\x32",
-  "\x00\x00", "\x00\x00", "\x6c\x33", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6c\x34", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x35", "\x00\x00",
-  "\x00\x00", "\x6c\x36", "\x00\x00", "\x00\x00", "\x6c\x37", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x38", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6c\x39", "\x00\x00", "\x6c\x3a", "\x6c\x3b", "\x6c\x3c", "\x6c\x3d",
-  "\x6c\x3e", "\x6c\x3f", "\x00\x00", "\x00\x00", "\x6c\x40", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6c\x41", "\x6c\x42", "\x6c\x43", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x44", "\x00\x00", "\x6c\x45",
-  "\x00\x00", "\x6c\x46", "\x00\x00", "\x6c\x47", "\x00\x00", "\x00\x00",
-  "\x6c\x48", "\x00\x00", "\x6c\x49", "\x00\x00", "\x00\x00", "\x6c\x4a",
-  "\x6c\x4b", "\x6c\x4c", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x4e",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x4f", "\x00\x00",
-  "\x00\x00", "\x6c\x4d", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x50",
-  "\x00\x00", "\x6c\x51", "\x6c\x52", "\x6c\x53", "\x00\x00", "\x00\x00",
-  "\x6c\x54", "\x6c\x55", "\x00\x00", "\x00\x00", "\x6c\x56", "\x00\x00",
-  "\x00\x00", "\x6c\x57", "\x6c\x58", "\x6c\x59", "\x6c\x5a", "\x6c\x5b",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x5c", "\x00\x00", "\x6c\x5d",
-  "\x6c\x5e", "\x6c\x5f", "\x6c\x60", "\x00\x00", "\x6c\x61", "\x6c\x62",
-  "\x6c\x63", "\x6c\x64", "\x00\x00", "\x6c\x65", "\x00\x00", "\x00\x00",
-  "\x6c\x66", "\x00\x00", "\x00\x00", "\x6c\x67", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x68", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6c\x69", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x6a",
-  "\x00\x00", "\x6c\x6b", "\x6c\x6c", "\x6c\x6d", "\x00\x00", "\x00\x00",
-  "\x6c\x6e", "\x6c\x6f", "\x6c\x70", "\x6c\x71", "\x00\x00", "\x6c\x72",
-  "\x00\x00", "\x00\x00", "\x6c\x73", "\x6c\x74", "\x6c\x75", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x76", "\x00\x00", "\x00\x00",
-  "\x6c\x77", "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6c\x78",
-  "\x6c\x79", "\x6c\x7a", "\x00\x00", "\x6c\x7b", "\x6c\x7c", "\x6c\x7d",
-  "\x00\x00", "\x00\x00", "\x6c\x7e", "\x00\x00", "\x00\x00", "\x6d\x21",
-  "\x6d\x22", "\x00\x00", "\x00\x00", "\x6d\x23", "\x6d\x24", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x25", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x26", "\x6d\x27",
-  "\x6d\x28", "\x6d\x29", "\x00\x00", "\x6d\x2a", "\x00\x00", "\x6d\x2b",
-  "\x6d\x2c", "\x00\x00", "\x6d\x2d", "\x6d\x2e", "\x6d\x2f", "\x00\x00",
-  "\x00\x00", "\x00\x00", "\x6d\x30", "\x00\x00", "\x00\x00", "\x6d\x31",
-  "\x00\x00", "\x00\x00", "\x00\x00", "\x6d\x32", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6d\x33", "\x6d\x34", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x35", "\x00\x00", "\x6d\x36", "\x6d\x37", "\x00\x00", "\x6d\x38",
-  "\x00\x00", "\x00\x00", "\x6d\x39", "\x00\x00", "\x6d\x3a", "\x6d\x3b",
-  "\x00\x00", "\x6d\x3c", "\x6d\x3d", "\x00\x00", "\x6d\x3e", "\x00\x00",
-  "\x6d\x3f", "\x00\x00", "\x6d\x40", "\x6d\x41", "\x6d\x42", "\x6d\x43",
-  "\x6d\x44", "\x6d\x45", "\x00\x00", "\x6d\x46", "\x6d\x47", "\x6d\x48",
-  "\x6d\x49", "\x00\x00", "\x6d\x4a", "\x00\x00", "\x00\x00", "\x6d\x4b",
-  "\x6d\x4c", "\x6d\x4d", "\x6d\x4e", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x6d\x4f", "\x6d\x50", "\x6d\x51", "\x6d\x52", "\x6d\x53", "\x00\x00",
-  "\x6d\x54", "\x00\x00", "\x6d\x55", "\x00\x00", "\x00\x00", "\x00\x00",
-  "\x00\x00", "\x6d\x56", "\x00\x00", "\x00\x00", "\x6d\x57", "\x6d\x58",
-  "\x6d\x59", "\x6d\x5a", "\x6d\x5b", "\x00\x00", "\x6d\x5c", "\x00\x00",
-  "\x6d\x5d", "\x6d\x5e", "\x6d\x5f", "\x00\x00", "\x00\x00", "\x6d\x60",
-  "\x6d\x61", "\x6d\x62", "\x00\x00", "\x6d\x63", "\x22\x37"
-};
diff --git a/newlib/iconvdata/jis0212.h b/newlib/iconvdata/jis0212.h
deleted file mode 100644
index f57778eba..000000000
--- a/newlib/iconvdata/jis0212.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Access functions for JISX0212 conversion.
-   Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _JIS0212_H
-#define _JIS0212_H	1
-
-#include <gconv.h>
-#include <stdint.h>
-
-
-/* Struct for table with indeces in mapping table.  */
-struct jisx0212_idx
-{
-  uint16_t start;
-  uint16_t end;
-  uint16_t idx;
-};
-
-/* Conversion table.  */
-extern const struct jisx0212_idx __jisx0212_to_ucs_idx[];
-extern const uint16_t __jisx0212_to_ucs[];
-
-extern const struct jisx0212_idx __jisx0212_from_ucs_idx[];
-extern const char __jisx0212_from_ucs[][2];
-
-
-static inline uint32_t
-jisx0212_to_ucs4 (const unsigned char **s, size_t avail, unsigned char offset)
-{
-  const struct jisx0212_idx *rp = __jisx0212_to_ucs_idx;
-  unsigned char ch = *(*s);
-  unsigned char ch2;
-  uint32_t wch = 0;
-  int idx;
-
-  if (ch < offset || (ch - offset) < 0x22 || (ch - offset) > 0x6d)
-    return __UNKNOWN_10646_CHAR;
-
-  if (avail < 2)
-    return 0;
-
-  ch2 = (*s)[1];
-  if (ch2 < offset || (ch2 - offset) <= 0x20 || (ch2 - offset) >= 0x7f)
-    return __UNKNOWN_10646_CHAR;
-
-  idx = (ch - offset - 0x21) * 94 + (ch2 - offset - 0x21);
-
-  while (idx > rp->end)
-    ++rp;
-  if (idx >= rp->start)
-    wch = __jisx0212_to_ucs[rp->idx + idx - rp->start];
-
-  if (wch != L'\0')
-    (*s) += 2;
-  else
-    wch = __UNKNOWN_10646_CHAR;
-
-  return wch;
-}
-
-
-static inline size_t
-ucs4_to_jisx0212 (uint32_t wch, char *s, size_t avail)
-{
-  const struct jisx0212_idx *rp = __jisx0212_from_ucs_idx;
-  unsigned int ch = (unsigned int) wch;
-  const char *cp;
-
-  if (ch >= 0xffff)
-    return __UNKNOWN_10646_CHAR;
-  while (ch > rp->end)
-    ++rp;
-  if (ch >= rp->start)
-    cp = __jisx0212_from_ucs[rp->idx + ch - rp->start];
-  else
-    return __UNKNOWN_10646_CHAR;
-
-  if (cp[0] == '\0')
-    return __UNKNOWN_10646_CHAR;
-
-  s[0] = cp[0];
-  if (cp[1] != '\0')
-    {
-      if (avail < 2)
-	return 0;
-
-      s[1] = cp[1];
-    }
-
-  return 2;
-}
-
-#endif /* jis0212.h */
diff --git a/newlib/iconvdata/sjis.c b/newlib/iconvdata/sjis.c
deleted file mode 100644
index 3a19642c8..000000000
--- a/newlib/iconvdata/sjis.c
+++ /dev/null
@@ -1,4512 +0,0 @@
-/* Mapping tables for SJIS handling.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <stdint.h>
-#include <wchar.h>
-
-static const uint32_t halfkana_to_ucs4[] =
-{
-  0xff61, 0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67, 0xff68,
-  0xff69, 0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f, 0xff70,
-  0xff71, 0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77, 0xff78,
-  0xff79, 0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f, 0xff80,
-  0xff81, 0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87, 0xff88,
-  0xff89, 0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f, 0xff90,
-  0xff91, 0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97, 0xff98,
-  0xff99, 0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f
-};
-
-
-/* The following table can be generated from the file
-	unix/mappings/eastasia/jis/shiftjis.txt
-   from the Unicode CD (also available on their FTP server) using
-   the command
-
-	egrep '^0x8[01234][[:xdigit:]][[:xdigit:]]' \
-	  /mnt/cdrom/unix/mappings/eastasia/jis/shiftjis.txt | perl ~/sjis.pl
-
-   where sjis.pl contains:
-
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  while (<>) {
-    local($sjis, $ucs, %rest) = split;
-    $sjis = hex($sjis) - 0x8140;
-    local($sidx) = int($sjis / 256) * 192 + ($sjis % 256);
-    printf "\n " if (($n % 4) == 0);
-    ++$n;
-    printf " [%4d] = %s,", $sidx, $ucs;
-  }
-  print "\n";
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-
-static const uint16_t cjk_block1[703] =
-{
-  [  0] = 0x3000, [  1] = 0x3001, [  2] = 0x3002, [  3] = 0xFF0C,
-  [  4] = 0xFF0E, [  5] = 0x30FB, [  6] = 0xFF1A, [  7] = 0xFF1B,
-  [  8] = 0xFF1F, [  9] = 0xFF01, [ 10] = 0x309B, [ 11] = 0x309C,
-  [ 12] = 0x00B4, [ 13] = 0xFF40, [ 14] = 0x00A8, [ 15] = 0xFF3E,
-  [ 16] = 0xFFE3, [ 17] = 0xFF3F, [ 18] = 0x30FD, [ 19] = 0x30FE,
-  [ 20] = 0x309D, [ 21] = 0x309E, [ 22] = 0x3003, [ 23] = 0x4EDD,
-  [ 24] = 0x3005, [ 25] = 0x3006, [ 26] = 0x3007, [ 27] = 0x30FC,
-  [ 28] = 0x2015, [ 29] = 0x2010, [ 30] = 0xFF0F, [ 31] = 0xFF3C,
-  [ 32] = 0x301C, [ 33] = 0x2016, [ 34] = 0xFF5C, [ 35] = 0x2026,
-  [ 36] = 0x2025, [ 37] = 0x2018, [ 38] = 0x2019, [ 39] = 0x201C,
-  [ 40] = 0x201D, [ 41] = 0xFF08, [ 42] = 0xFF09, [ 43] = 0x3014,
-  [ 44] = 0x3015, [ 45] = 0xFF3B, [ 46] = 0xFF3D, [ 47] = 0xFF5B,
-  [ 48] = 0xFF5D, [ 49] = 0x3008, [ 50] = 0x3009, [ 51] = 0x300A,
-  [ 52] = 0x300B, [ 53] = 0x300C, [ 54] = 0x300D, [ 55] = 0x300E,
-  [ 56] = 0x300F, [ 57] = 0x3010, [ 58] = 0x3011, [ 59] = 0xFF0B,
-  [ 60] = 0x2212, [ 61] = 0x00B1, [ 62] = 0x00D7, [ 64] = 0x00F7,
-  [ 65] = 0xFF1D, [ 66] = 0x2260, [ 67] = 0xFF1C, [ 68] = 0xFF1E,
-  [ 69] = 0x2266, [ 70] = 0x2267, [ 71] = 0x221E, [ 72] = 0x2234,
-  [ 73] = 0x2642, [ 74] = 0x2640, [ 75] = 0x00B0, [ 76] = 0x2032,
-  [ 77] = 0x2033, [ 78] = 0x2103, [ 79] = 0xFFE5, [ 80] = 0xFF04,
-  [ 81] = 0x00A2, [ 82] = 0x00A3, [ 83] = 0xFF05, [ 84] = 0xFF03,
-  [ 85] = 0xFF06, [ 86] = 0xFF0A, [ 87] = 0xFF20, [ 88] = 0x00A7,
-  [ 89] = 0x2606, [ 90] = 0x2605, [ 91] = 0x25CB, [ 92] = 0x25CF,
-  [ 93] = 0x25CE, [ 94] = 0x25C7, [ 95] = 0x25C6, [ 96] = 0x25A1,
-  [ 97] = 0x25A0, [ 98] = 0x25B3, [ 99] = 0x25B2, [100] = 0x25BD,
-  [101] = 0x25BC, [102] = 0x203B, [103] = 0x3012, [104] = 0x2192,
-  [105] = 0x2190, [106] = 0x2191, [107] = 0x2193, [108] = 0x3013,
-  [120] = 0x2208, [121] = 0x220B, [122] = 0x2286, [123] = 0x2287,
-  [124] = 0x2282, [125] = 0x2283, [126] = 0x222A, [127] = 0x2229,
-  [136] = 0x2227, [137] = 0x2228, [138] = 0x00AC, [139] = 0x21D2,
-  [140] = 0x21D4, [141] = 0x2200, [142] = 0x2203, [154] = 0x2220,
-  [155] = 0x22A5, [156] = 0x2312, [157] = 0x2202, [158] = 0x2207,
-  [159] = 0x2261, [160] = 0x2252, [161] = 0x226A, [162] = 0x226B,
-  [163] = 0x221A, [164] = 0x223D, [165] = 0x221D, [166] = 0x2235,
-  [167] = 0x222B, [168] = 0x222C, [176] = 0x212B, [177] = 0x2030,
-  [178] = 0x266F, [179] = 0x266D, [180] = 0x266A, [181] = 0x2020,
-  [182] = 0x2021, [183] = 0x00B6, [188] = 0x25EF, [207] = 0xFF10,
-  [208] = 0xFF11, [209] = 0xFF12, [210] = 0xFF13, [211] = 0xFF14,
-  [212] = 0xFF15, [213] = 0xFF16, [214] = 0xFF17, [215] = 0xFF18,
-  [216] = 0xFF19, [224] = 0xFF21, [225] = 0xFF22, [226] = 0xFF23,
-  [227] = 0xFF24, [228] = 0xFF25, [229] = 0xFF26, [230] = 0xFF27,
-  [231] = 0xFF28, [232] = 0xFF29, [233] = 0xFF2A, [234] = 0xFF2B,
-  [235] = 0xFF2C, [236] = 0xFF2D, [237] = 0xFF2E, [238] = 0xFF2F,
-  [239] = 0xFF30, [240] = 0xFF31, [241] = 0xFF32, [242] = 0xFF33,
-  [243] = 0xFF34, [244] = 0xFF35, [245] = 0xFF36, [246] = 0xFF37,
-  [247] = 0xFF38, [248] = 0xFF39, [249] = 0xFF3A, [257] = 0xFF41,
-  [258] = 0xFF42, [259] = 0xFF43, [260] = 0xFF44, [261] = 0xFF45,
-  [262] = 0xFF46, [263] = 0xFF47, [264] = 0xFF48, [265] = 0xFF49,
-  [266] = 0xFF4A, [267] = 0xFF4B, [268] = 0xFF4C, [269] = 0xFF4D,
-  [270] = 0xFF4E, [271] = 0xFF4F, [272] = 0xFF50, [273] = 0xFF51,
-  [274] = 0xFF52, [275] = 0xFF53, [276] = 0xFF54, [277] = 0xFF55,
-  [278] = 0xFF56, [279] = 0xFF57, [280] = 0xFF58, [281] = 0xFF59,
-  [282] = 0xFF5A, [287] = 0x3041, [288] = 0x3042, [289] = 0x3043,
-  [290] = 0x3044, [291] = 0x3045, [292] = 0x3046, [293] = 0x3047,
-  [294] = 0x3048, [295] = 0x3049, [296] = 0x304A, [297] = 0x304B,
-  [298] = 0x304C, [299] = 0x304D, [300] = 0x304E, [301] = 0x304F,
-  [302] = 0x3050, [303] = 0x3051, [304] = 0x3052, [305] = 0x3053,
-  [306] = 0x3054, [307] = 0x3055, [308] = 0x3056, [309] = 0x3057,
-  [310] = 0x3058, [311] = 0x3059, [312] = 0x305A, [313] = 0x305B,
-  [314] = 0x305C, [315] = 0x305D, [316] = 0x305E, [317] = 0x305F,
-  [318] = 0x3060, [319] = 0x3061, [320] = 0x3062, [321] = 0x3063,
-  [322] = 0x3064, [323] = 0x3065, [324] = 0x3066, [325] = 0x3067,
-  [326] = 0x3068, [327] = 0x3069, [328] = 0x306A, [329] = 0x306B,
-  [330] = 0x306C, [331] = 0x306D, [332] = 0x306E, [333] = 0x306F,
-  [334] = 0x3070, [335] = 0x3071, [336] = 0x3072, [337] = 0x3073,
-  [338] = 0x3074, [339] = 0x3075, [340] = 0x3076, [341] = 0x3077,
-  [342] = 0x3078, [343] = 0x3079, [344] = 0x307A, [345] = 0x307B,
-  [346] = 0x307C, [347] = 0x307D, [348] = 0x307E, [349] = 0x307F,
-  [350] = 0x3080, [351] = 0x3081, [352] = 0x3082, [353] = 0x3083,
-  [354] = 0x3084, [355] = 0x3085, [356] = 0x3086, [357] = 0x3087,
-  [358] = 0x3088, [359] = 0x3089, [360] = 0x308A, [361] = 0x308B,
-  [362] = 0x308C, [363] = 0x308D, [364] = 0x308E, [365] = 0x308F,
-  [366] = 0x3090, [367] = 0x3091, [368] = 0x3092, [369] = 0x3093,
-  [384] = 0x30A1, [385] = 0x30A2, [386] = 0x30A3, [387] = 0x30A4,
-  [388] = 0x30A5, [389] = 0x30A6, [390] = 0x30A7, [391] = 0x30A8,
-  [392] = 0x30A9, [393] = 0x30AA, [394] = 0x30AB, [395] = 0x30AC,
-  [396] = 0x30AD, [397] = 0x30AE, [398] = 0x30AF, [399] = 0x30B0,
-  [400] = 0x30B1, [401] = 0x30B2, [402] = 0x30B3, [403] = 0x30B4,
-  [404] = 0x30B5, [405] = 0x30B6, [406] = 0x30B7, [407] = 0x30B8,
-  [408] = 0x30B9, [409] = 0x30BA, [410] = 0x30BB, [411] = 0x30BC,
-  [412] = 0x30BD, [413] = 0x30BE, [414] = 0x30BF, [415] = 0x30C0,
-  [416] = 0x30C1, [417] = 0x30C2, [418] = 0x30C3, [419] = 0x30C4,
-  [420] = 0x30C5, [421] = 0x30C6, [422] = 0x30C7, [423] = 0x30C8,
-  [424] = 0x30C9, [425] = 0x30CA, [426] = 0x30CB, [427] = 0x30CC,
-  [428] = 0x30CD, [429] = 0x30CE, [430] = 0x30CF, [431] = 0x30D0,
-  [432] = 0x30D1, [433] = 0x30D2, [434] = 0x30D3, [435] = 0x30D4,
-  [436] = 0x30D5, [437] = 0x30D6, [438] = 0x30D7, [439] = 0x30D8,
-  [440] = 0x30D9, [441] = 0x30DA, [442] = 0x30DB, [443] = 0x30DC,
-  [444] = 0x30DD, [445] = 0x30DE, [446] = 0x30DF, [448] = 0x30E0,
-  [449] = 0x30E1, [450] = 0x30E2, [451] = 0x30E3, [452] = 0x30E4,
-  [453] = 0x30E5, [454] = 0x30E6, [455] = 0x30E7, [456] = 0x30E8,
-  [457] = 0x30E9, [458] = 0x30EA, [459] = 0x30EB, [460] = 0x30EC,
-  [461] = 0x30ED, [462] = 0x30EE, [463] = 0x30EF, [464] = 0x30F0,
-  [465] = 0x30F1, [466] = 0x30F2, [467] = 0x30F3, [468] = 0x30F4,
-  [469] = 0x30F5, [470] = 0x30F6, [479] = 0x0391, [480] = 0x0392,
-  [481] = 0x0393, [482] = 0x0394, [483] = 0x0395, [484] = 0x0396,
-  [485] = 0x0397, [486] = 0x0398, [487] = 0x0399, [488] = 0x039A,
-  [489] = 0x039B, [490] = 0x039C, [491] = 0x039D, [492] = 0x039E,
-  [493] = 0x039F, [494] = 0x03A0, [495] = 0x03A1, [496] = 0x03A3,
-  [497] = 0x03A4, [498] = 0x03A5, [499] = 0x03A6, [500] = 0x03A7,
-  [501] = 0x03A8, [502] = 0x03A9, [511] = 0x03B1, [512] = 0x03B2,
-  [513] = 0x03B3, [514] = 0x03B4, [515] = 0x03B5, [516] = 0x03B6,
-  [517] = 0x03B7, [518] = 0x03B8, [519] = 0x03B9, [520] = 0x03BA,
-  [521] = 0x03BB, [522] = 0x03BC, [523] = 0x03BD, [524] = 0x03BE,
-  [525] = 0x03BF, [526] = 0x03C0, [527] = 0x03C1, [528] = 0x03C3,
-  [529] = 0x03C4, [530] = 0x03C5, [531] = 0x03C6, [532] = 0x03C7,
-  [533] = 0x03C8, [534] = 0x03C9, [576] = 0x0410, [577] = 0x0411,
-  [578] = 0x0412, [579] = 0x0413, [580] = 0x0414, [581] = 0x0415,
-  [582] = 0x0401, [583] = 0x0416, [584] = 0x0417, [585] = 0x0418,
-  [586] = 0x0419, [587] = 0x041A, [588] = 0x041B, [589] = 0x041C,
-  [590] = 0x041D, [591] = 0x041E, [592] = 0x041F, [593] = 0x0420,
-  [594] = 0x0421, [595] = 0x0422, [596] = 0x0423, [597] = 0x0424,
-  [598] = 0x0425, [599] = 0x0426, [600] = 0x0427, [601] = 0x0428,
-  [602] = 0x0429, [603] = 0x042A, [604] = 0x042B, [605] = 0x042C,
-  [606] = 0x042D, [607] = 0x042E, [608] = 0x042F, [624] = 0x0430,
-  [625] = 0x0431, [626] = 0x0432, [627] = 0x0433, [628] = 0x0434,
-  [629] = 0x0435, [630] = 0x0451, [631] = 0x0436, [632] = 0x0437,
-  [633] = 0x0438, [634] = 0x0439, [635] = 0x043A, [636] = 0x043B,
-  [637] = 0x043C, [638] = 0x043D, [640] = 0x043E, [641] = 0x043F,
-  [642] = 0x0440, [643] = 0x0441, [644] = 0x0442, [645] = 0x0443,
-  [646] = 0x0444, [647] = 0x0445, [648] = 0x0446, [649] = 0x0447,
-  [650] = 0x0448, [651] = 0x0449, [652] = 0x044A, [653] = 0x044B,
-  [654] = 0x044C, [655] = 0x044D, [656] = 0x044E, [657] = 0x044F,
-  [671] = 0x2500, [672] = 0x2502, [673] = 0x250C, [674] = 0x2510,
-  [675] = 0x2518, [676] = 0x2514, [677] = 0x251C, [678] = 0x252C,
-  [679] = 0x2524, [680] = 0x2534, [681] = 0x253C, [682] = 0x2501,
-  [683] = 0x2503, [684] = 0x250F, [685] = 0x2513, [686] = 0x251B,
-  [687] = 0x2517, [688] = 0x2523, [689] = 0x2533, [690] = 0x252B,
-  [691] = 0x253B, [692] = 0x254B, [693] = 0x2520, [694] = 0x252F,
-  [695] = 0x2528, [696] = 0x2537, [697] = 0x253F, [698] = 0x251D,
-  [699] = 0x2530, [700] = 0x2525, [701] = 0x2538, [702] = 0x2542
-};
-
-
-/* The following table can be generated from the file
-	unix/mappings/eastasia/jis/shiftjis.txt
-   from the Unicode CD (also available on their FTP server) using
-   the command
-
-	egrep '^0x8[89][[:xdigit:]][[:xdigit:]]' \
-	  /mnt/cdrom/unix/mappings/eastasia/jis/shiftjis.txt | perl ~/sjis.pl
-
-   where sjis.pl contains:
-
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  while (<>) {
-    local($sjis, $ucs, %rest) = split;
-    $sjis = hex($sjis) - 0x8840;
-    local($sidx) = int($sjis / 256) * 192 + ($sjis % 256) - 0x5f;
-    printf "\n " if (($n % 4) == 0);
-    ++$n;
-    printf " [%3d] = %s,", $sidx, $ucs;
-  }
-  print "\n";
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-static const uint16_t cjk_block2[94] =
-{
-  [  0] = 0x4E9C, [  1] = 0x5516, [  2] = 0x5A03, [  3] = 0x963F,
-  [  4] = 0x54C0, [  5] = 0x611B, [  6] = 0x6328, [  7] = 0x59F6,
-  [  8] = 0x9022, [  9] = 0x8475, [ 10] = 0x831C, [ 11] = 0x7A50,
-  [ 12] = 0x60AA, [ 13] = 0x63E1, [ 14] = 0x6E25, [ 15] = 0x65ED,
-  [ 16] = 0x8466, [ 17] = 0x82A6, [ 18] = 0x9BF5, [ 19] = 0x6893,
-  [ 20] = 0x5727, [ 21] = 0x65A1, [ 22] = 0x6271, [ 23] = 0x5B9B,
-  [ 24] = 0x59D0, [ 25] = 0x867B, [ 26] = 0x98F4, [ 27] = 0x7D62,
-  [ 28] = 0x7DBE, [ 29] = 0x9B8E, [ 30] = 0x6216, [ 31] = 0x7C9F,
-  [ 32] = 0x88B7, [ 33] = 0x5B89, [ 34] = 0x5EB5, [ 35] = 0x6309,
-  [ 36] = 0x6697, [ 37] = 0x6848, [ 38] = 0x95C7, [ 39] = 0x978D,
-  [ 40] = 0x674F, [ 41] = 0x4EE5, [ 42] = 0x4F0A, [ 43] = 0x4F4D,
-  [ 44] = 0x4F9D, [ 45] = 0x5049, [ 46] = 0x56F2, [ 47] = 0x5937,
-  [ 48] = 0x59D4, [ 49] = 0x5A01, [ 50] = 0x5C09, [ 51] = 0x60DF,
-  [ 52] = 0x610F, [ 53] = 0x6170, [ 54] = 0x6613, [ 55] = 0x6905,
-  [ 56] = 0x70BA, [ 57] = 0x754F, [ 58] = 0x7570, [ 59] = 0x79FB,
-  [ 60] = 0x7DAD, [ 61] = 0x7DEF, [ 62] = 0x80C3, [ 63] = 0x840E,
-  [ 64] = 0x8863, [ 65] = 0x8B02, [ 66] = 0x9055, [ 67] = 0x907A,
-  [ 68] = 0x533B, [ 69] = 0x4E95, [ 70] = 0x4EA5, [ 71] = 0x57DF,
-  [ 72] = 0x80B2, [ 73] = 0x90C1, [ 74] = 0x78EF, [ 75] = 0x4E00,
-  [ 76] = 0x58F1, [ 77] = 0x6EA2, [ 78] = 0x9038, [ 79] = 0x7A32,
-  [ 80] = 0x8328, [ 81] = 0x828B, [ 82] = 0x9C2F, [ 83] = 0x5141,
-  [ 84] = 0x5370, [ 85] = 0x54BD, [ 86] = 0x54E1, [ 87] = 0x56E0,
-  [ 88] = 0x59FB, [ 89] = 0x5F15, [ 90] = 0x98F2, [ 91] = 0x6DEB,
-  [ 92] = 0x80E4, [ 93] = 0x852D
-};
-
-/* The following table can be generated from the file
-	unix/mappings/eastasia/jis/shiftjis.txt
-   from the Unicode CD (also available on their FTP server) using
-   the command
-
-	egrep '^0x(8[9a-fA-F]|9[[:xdigit:]])[[:xdigit:]][[:xdigit:]]' \
-	  /mnt/cdrom/unix/mappings/eastasia/jis/shiftjis.txt | perl ~/sjis.pl
-
-   where sjis.pl contains:
-
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  while (<>) {
-    local($sjis, $ucs, %rest) = split;
-    $sjis = hex($sjis) - 0x8940;
-    local($sidx) = int($sjis / 256) * 192 + ($sjis % 256) - 0x5f;
-    printf "\n " if (($n % 4) == 0);
-    ++$n;
-    printf " [%4d] = %s,", $sidx, $ucs;
-  }
-  print "\n";
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-static const uint16_t cjk_block3[4413] =
-{
-  [   0] = 0x9662, [   1] = 0x9670, [   2] = 0x96A0, [   3] = 0x97FB,
-  [   4] = 0x540B, [   5] = 0x53F3, [   6] = 0x5B87, [   7] = 0x70CF,
-  [   8] = 0x7FBD, [   9] = 0x8FC2, [  10] = 0x96E8, [  11] = 0x536F,
-  [  12] = 0x9D5C, [  13] = 0x7ABA, [  14] = 0x4E11, [  15] = 0x7893,
-  [  16] = 0x81FC, [  17] = 0x6E26, [  18] = 0x5618, [  19] = 0x5504,
-  [  20] = 0x6B1D, [  21] = 0x851A, [  22] = 0x9C3B, [  23] = 0x59E5,
-  [  24] = 0x53A9, [  25] = 0x6D66, [  26] = 0x74DC, [  27] = 0x958F,
-  [  28] = 0x5642, [  29] = 0x4E91, [  30] = 0x904B, [  31] = 0x96F2,
-  [  32] = 0x834F, [  33] = 0x990C, [  34] = 0x53E1, [  35] = 0x55B6,
-  [  36] = 0x5B30, [  37] = 0x5F71, [  38] = 0x6620, [  39] = 0x66F3,
-  [  40] = 0x6804, [  41] = 0x6C38, [  42] = 0x6CF3, [  43] = 0x6D29,
-  [  44] = 0x745B, [  45] = 0x76C8, [  46] = 0x7A4E, [  47] = 0x9834,
-  [  48] = 0x82F1, [  49] = 0x885B, [  50] = 0x8A60, [  51] = 0x92ED,
-  [  52] = 0x6DB2, [  53] = 0x75AB, [  54] = 0x76CA, [  55] = 0x99C5,
-  [  56] = 0x60A6, [  57] = 0x8B01, [  58] = 0x8D8A, [  59] = 0x95B2,
-  [  60] = 0x698E, [  61] = 0x53AD, [  62] = 0x5186, [  64] = 0x5712,
-  [  65] = 0x5830, [  66] = 0x5944, [  67] = 0x5BB4, [  68] = 0x5EF6,
-  [  69] = 0x6028, [  70] = 0x63A9, [  71] = 0x63F4, [  72] = 0x6CBF,
-  [  73] = 0x6F14, [  74] = 0x708E, [  75] = 0x7114, [  76] = 0x7159,
-  [  77] = 0x71D5, [  78] = 0x733F, [  79] = 0x7E01, [  80] = 0x8276,
-  [  81] = 0x82D1, [  82] = 0x8597, [  83] = 0x9060, [  84] = 0x925B,
-  [  85] = 0x9D1B, [  86] = 0x5869, [  87] = 0x65BC, [  88] = 0x6C5A,
-  [  89] = 0x7525, [  90] = 0x51F9, [  91] = 0x592E, [  92] = 0x5965,
-  [  93] = 0x5F80, [  94] = 0x5FDC, [  95] = 0x62BC, [  96] = 0x65FA,
-  [  97] = 0x6A2A, [  98] = 0x6B27, [  99] = 0x6BB4, [ 100] = 0x738B,
-  [ 101] = 0x7FC1, [ 102] = 0x8956, [ 103] = 0x9D2C, [ 104] = 0x9D0E,
-  [ 105] = 0x9EC4, [ 106] = 0x5CA1, [ 107] = 0x6C96, [ 108] = 0x837B,
-  [ 109] = 0x5104, [ 110] = 0x5C4B, [ 111] = 0x61B6, [ 112] = 0x81C6,
-  [ 113] = 0x6876, [ 114] = 0x7261, [ 115] = 0x4E59, [ 116] = 0x4FFA,
-  [ 117] = 0x5378, [ 118] = 0x6069, [ 119] = 0x6E29, [ 120] = 0x7A4F,
-  [ 121] = 0x97F3, [ 122] = 0x4E0B, [ 123] = 0x5316, [ 124] = 0x4EEE,
-  [ 125] = 0x4F55, [ 126] = 0x4F3D, [ 127] = 0x4FA1, [ 128] = 0x4F73,
-  [ 129] = 0x52A0, [ 130] = 0x53EF, [ 131] = 0x5609, [ 132] = 0x590F,
-  [ 133] = 0x5AC1, [ 134] = 0x5BB6, [ 135] = 0x5BE1, [ 136] = 0x79D1,
-  [ 137] = 0x6687, [ 138] = 0x679C, [ 139] = 0x67B6, [ 140] = 0x6B4C,
-  [ 141] = 0x6CB3, [ 142] = 0x706B, [ 143] = 0x73C2, [ 144] = 0x798D,
-  [ 145] = 0x79BE, [ 146] = 0x7A3C, [ 147] = 0x7B87, [ 148] = 0x82B1,
-  [ 149] = 0x82DB, [ 150] = 0x8304, [ 151] = 0x8377, [ 152] = 0x83EF,
-  [ 153] = 0x83D3, [ 154] = 0x8766, [ 155] = 0x8AB2, [ 156] = 0x5629,
-  [ 157] = 0x8CA8, [ 158] = 0x8FE6, [ 159] = 0x904E, [ 160] = 0x971E,
-  [ 161] = 0x868A, [ 162] = 0x4FC4, [ 163] = 0x5CE8, [ 164] = 0x6211,
-  [ 165] = 0x7259, [ 166] = 0x753B, [ 167] = 0x81E5, [ 168] = 0x82BD,
-  [ 169] = 0x86FE, [ 170] = 0x8CC0, [ 171] = 0x96C5, [ 172] = 0x9913,
-  [ 173] = 0x99D5, [ 174] = 0x4ECB, [ 175] = 0x4F1A, [ 176] = 0x89E3,
-  [ 177] = 0x56DE, [ 178] = 0x584A, [ 179] = 0x58CA, [ 180] = 0x5EFB,
-  [ 181] = 0x5FEB, [ 182] = 0x602A, [ 183] = 0x6094, [ 184] = 0x6062,
-  [ 185] = 0x61D0, [ 186] = 0x6212, [ 187] = 0x62D0, [ 188] = 0x6539,
-  [ 192] = 0x9B41, [ 193] = 0x6666, [ 194] = 0x68B0, [ 195] = 0x6D77,
-  [ 196] = 0x7070, [ 197] = 0x754C, [ 198] = 0x7686, [ 199] = 0x7D75,
-  [ 200] = 0x82A5, [ 201] = 0x87F9, [ 202] = 0x958B, [ 203] = 0x968E,
-  [ 204] = 0x8C9D, [ 205] = 0x51F1, [ 206] = 0x52BE, [ 207] = 0x5916,
-  [ 208] = 0x54B3, [ 209] = 0x5BB3, [ 210] = 0x5D16, [ 211] = 0x6168,
-  [ 212] = 0x6982, [ 213] = 0x6DAF, [ 214] = 0x788D, [ 215] = 0x84CB,
-  [ 216] = 0x8857, [ 217] = 0x8A72, [ 218] = 0x93A7, [ 219] = 0x9AB8,
-  [ 220] = 0x6D6C, [ 221] = 0x99A8, [ 222] = 0x86D9, [ 223] = 0x57A3,
-  [ 224] = 0x67FF, [ 225] = 0x86CE, [ 226] = 0x920E, [ 227] = 0x5283,
-  [ 228] = 0x5687, [ 229] = 0x5404, [ 230] = 0x5ED3, [ 231] = 0x62E1,
-  [ 232] = 0x64B9, [ 233] = 0x683C, [ 234] = 0x6838, [ 235] = 0x6BBB,
-  [ 236] = 0x7372, [ 237] = 0x78BA, [ 238] = 0x7A6B, [ 239] = 0x899A,
-  [ 240] = 0x89D2, [ 241] = 0x8D6B, [ 242] = 0x8F03, [ 243] = 0x90ED,
-  [ 244] = 0x95A3, [ 245] = 0x9694, [ 246] = 0x9769, [ 247] = 0x5B66,
-  [ 248] = 0x5CB3, [ 249] = 0x697D, [ 250] = 0x984D, [ 251] = 0x984E,
-  [ 252] = 0x639B, [ 253] = 0x7B20, [ 254] = 0x6A2B, [ 256] = 0x6A7F,
-  [ 257] = 0x68B6, [ 258] = 0x9C0D, [ 259] = 0x6F5F, [ 260] = 0x5272,
-  [ 261] = 0x559D, [ 262] = 0x6070, [ 263] = 0x62EC, [ 264] = 0x6D3B,
-  [ 265] = 0x6E07, [ 266] = 0x6ED1, [ 267] = 0x845B, [ 268] = 0x8910,
-  [ 269] = 0x8F44, [ 270] = 0x4E14, [ 271] = 0x9C39, [ 272] = 0x53F6,
-  [ 273] = 0x691B, [ 274] = 0x6A3A, [ 275] = 0x9784, [ 276] = 0x682A,
-  [ 277] = 0x515C, [ 278] = 0x7AC3, [ 279] = 0x84B2, [ 280] = 0x91DC,
-  [ 281] = 0x938C, [ 282] = 0x565B, [ 283] = 0x9D28, [ 284] = 0x6822,
-  [ 285] = 0x8305, [ 286] = 0x8431, [ 287] = 0x7CA5, [ 288] = 0x5208,
-  [ 289] = 0x82C5, [ 290] = 0x74E6, [ 291] = 0x4E7E, [ 292] = 0x4F83,
-  [ 293] = 0x51A0, [ 294] = 0x5BD2, [ 295] = 0x520A, [ 296] = 0x52D8,
-  [ 297] = 0x52E7, [ 298] = 0x5DFB, [ 299] = 0x559A, [ 300] = 0x582A,
-  [ 301] = 0x59E6, [ 302] = 0x5B8C, [ 303] = 0x5B98, [ 304] = 0x5BDB,
-  [ 305] = 0x5E72, [ 306] = 0x5E79, [ 307] = 0x60A3, [ 308] = 0x611F,
-  [ 309] = 0x6163, [ 310] = 0x61BE, [ 311] = 0x63DB, [ 312] = 0x6562,
-  [ 313] = 0x67D1, [ 314] = 0x6853, [ 315] = 0x68FA, [ 316] = 0x6B3E,
-  [ 317] = 0x6B53, [ 318] = 0x6C57, [ 319] = 0x6F22, [ 320] = 0x6F97,
-  [ 321] = 0x6F45, [ 322] = 0x74B0, [ 323] = 0x7518, [ 324] = 0x76E3,
-  [ 325] = 0x770B, [ 326] = 0x7AFF, [ 327] = 0x7BA1, [ 328] = 0x7C21,
-  [ 329] = 0x7DE9, [ 330] = 0x7F36, [ 331] = 0x7FF0, [ 332] = 0x809D,
-  [ 333] = 0x8266, [ 334] = 0x839E, [ 335] = 0x89B3, [ 336] = 0x8ACC,
-  [ 337] = 0x8CAB, [ 338] = 0x9084, [ 339] = 0x9451, [ 340] = 0x9593,
-  [ 341] = 0x9591, [ 342] = 0x95A2, [ 343] = 0x9665, [ 344] = 0x97D3,
-  [ 345] = 0x9928, [ 346] = 0x8218, [ 347] = 0x4E38, [ 348] = 0x542B,
-  [ 349] = 0x5CB8, [ 350] = 0x5DCC, [ 351] = 0x73A9, [ 352] = 0x764C,
-  [ 353] = 0x773C, [ 354] = 0x5CA9, [ 355] = 0x7FEB, [ 356] = 0x8D0B,
-  [ 357] = 0x96C1, [ 358] = 0x9811, [ 359] = 0x9854, [ 360] = 0x9858,
-  [ 361] = 0x4F01, [ 362] = 0x4F0E, [ 363] = 0x5371, [ 364] = 0x559C,
-  [ 365] = 0x5668, [ 366] = 0x57FA, [ 367] = 0x5947, [ 368] = 0x5B09,
-  [ 369] = 0x5BC4, [ 370] = 0x5C90, [ 371] = 0x5E0C, [ 372] = 0x5E7E,
-  [ 373] = 0x5FCC, [ 374] = 0x63EE, [ 375] = 0x673A, [ 376] = 0x65D7,
-  [ 377] = 0x65E2, [ 378] = 0x671F, [ 379] = 0x68CB, [ 380] = 0x68C4,
-  [ 384] = 0x6A5F, [ 385] = 0x5E30, [ 386] = 0x6BC5, [ 387] = 0x6C17,
-  [ 388] = 0x6C7D, [ 389] = 0x757F, [ 390] = 0x7948, [ 391] = 0x5B63,
-  [ 392] = 0x7A00, [ 393] = 0x7D00, [ 394] = 0x5FBD, [ 395] = 0x898F,
-  [ 396] = 0x8A18, [ 397] = 0x8CB4, [ 398] = 0x8D77, [ 399] = 0x8ECC,
-  [ 400] = 0x8F1D, [ 401] = 0x98E2, [ 402] = 0x9A0E, [ 403] = 0x9B3C,
-  [ 404] = 0x4E80, [ 405] = 0x507D, [ 406] = 0x5100, [ 407] = 0x5993,
-  [ 408] = 0x5B9C, [ 409] = 0x622F, [ 410] = 0x6280, [ 411] = 0x64EC,
-  [ 412] = 0x6B3A, [ 413] = 0x72A0, [ 414] = 0x7591, [ 415] = 0x7947,
-  [ 416] = 0x7FA9, [ 417] = 0x87FB, [ 418] = 0x8ABC, [ 419] = 0x8B70,
-  [ 420] = 0x63AC, [ 421] = 0x83CA, [ 422] = 0x97A0, [ 423] = 0x5409,
-  [ 424] = 0x5403, [ 425] = 0x55AB, [ 426] = 0x6854, [ 427] = 0x6A58,
-  [ 428] = 0x8A70, [ 429] = 0x7827, [ 430] = 0x6775, [ 431] = 0x9ECD,
-  [ 432] = 0x5374, [ 433] = 0x5BA2, [ 434] = 0x811A, [ 435] = 0x8650,
-  [ 436] = 0x9006, [ 437] = 0x4E18, [ 438] = 0x4E45, [ 439] = 0x4EC7,
-  [ 440] = 0x4F11, [ 441] = 0x53CA, [ 442] = 0x5438, [ 443] = 0x5BAE,
-  [ 444] = 0x5F13, [ 445] = 0x6025, [ 446] = 0x6551, [ 448] = 0x673D,
-  [ 449] = 0x6C42, [ 450] = 0x6C72, [ 451] = 0x6CE3, [ 452] = 0x7078,
-  [ 453] = 0x7403, [ 454] = 0x7A76, [ 455] = 0x7AAE, [ 456] = 0x7B08,
-  [ 457] = 0x7D1A, [ 458] = 0x7CFE, [ 459] = 0x7D66, [ 460] = 0x65E7,
-  [ 461] = 0x725B, [ 462] = 0x53BB, [ 463] = 0x5C45, [ 464] = 0x5DE8,
-  [ 465] = 0x62D2, [ 466] = 0x62E0, [ 467] = 0x6319, [ 468] = 0x6E20,
-  [ 469] = 0x865A, [ 470] = 0x8A31, [ 471] = 0x8DDD, [ 472] = 0x92F8,
-  [ 473] = 0x6F01, [ 474] = 0x79A6, [ 475] = 0x9B5A, [ 476] = 0x4EA8,
-  [ 477] = 0x4EAB, [ 478] = 0x4EAC, [ 479] = 0x4F9B, [ 480] = 0x4FA0,
-  [ 481] = 0x50D1, [ 482] = 0x5147, [ 483] = 0x7AF6, [ 484] = 0x5171,
-  [ 485] = 0x51F6, [ 486] = 0x5354, [ 487] = 0x5321, [ 488] = 0x537F,
-  [ 489] = 0x53EB, [ 490] = 0x55AC, [ 491] = 0x5883, [ 492] = 0x5CE1,
-  [ 493] = 0x5F37, [ 494] = 0x5F4A, [ 495] = 0x602F, [ 496] = 0x6050,
-  [ 497] = 0x606D, [ 498] = 0x631F, [ 499] = 0x6559, [ 500] = 0x6A4B,
-  [ 501] = 0x6CC1, [ 502] = 0x72C2, [ 503] = 0x72ED, [ 504] = 0x77EF,
-  [ 505] = 0x80F8, [ 506] = 0x8105, [ 507] = 0x8208, [ 508] = 0x854E,
-  [ 509] = 0x90F7, [ 510] = 0x93E1, [ 511] = 0x97FF, [ 512] = 0x9957,
-  [ 513] = 0x9A5A, [ 514] = 0x4EF0, [ 515] = 0x51DD, [ 516] = 0x5C2D,
-  [ 517] = 0x6681, [ 518] = 0x696D, [ 519] = 0x5C40, [ 520] = 0x66F2,
-  [ 521] = 0x6975, [ 522] = 0x7389, [ 523] = 0x6850, [ 524] = 0x7C81,
-  [ 525] = 0x50C5, [ 526] = 0x52E4, [ 527] = 0x5747, [ 528] = 0x5DFE,
-  [ 529] = 0x9326, [ 530] = 0x65A4, [ 531] = 0x6B23, [ 532] = 0x6B3D,
-  [ 533] = 0x7434, [ 534] = 0x7981, [ 535] = 0x79BD, [ 536] = 0x7B4B,
-  [ 537] = 0x7DCA, [ 538] = 0x82B9, [ 539] = 0x83CC, [ 540] = 0x887F,
-  [ 541] = 0x895F, [ 542] = 0x8B39, [ 543] = 0x8FD1, [ 544] = 0x91D1,
-  [ 545] = 0x541F, [ 546] = 0x9280, [ 547] = 0x4E5D, [ 548] = 0x5036,
-  [ 549] = 0x53E5, [ 550] = 0x533A, [ 551] = 0x72D7, [ 552] = 0x7396,
-  [ 553] = 0x77E9, [ 554] = 0x82E6, [ 555] = 0x8EAF, [ 556] = 0x99C6,
-  [ 557] = 0x99C8, [ 558] = 0x99D2, [ 559] = 0x5177, [ 560] = 0x611A,
-  [ 561] = 0x865E, [ 562] = 0x55B0, [ 563] = 0x7A7A, [ 564] = 0x5076,
-  [ 565] = 0x5BD3, [ 566] = 0x9047, [ 567] = 0x9685, [ 568] = 0x4E32,
-  [ 569] = 0x6ADB, [ 570] = 0x91E7, [ 571] = 0x5C51, [ 572] = 0x5C48,
-  [ 576] = 0x6398, [ 577] = 0x7A9F, [ 578] = 0x6C93, [ 579] = 0x9774,
-  [ 580] = 0x8F61, [ 581] = 0x7AAA, [ 582] = 0x718A, [ 583] = 0x9688,
-  [ 584] = 0x7C82, [ 585] = 0x6817, [ 586] = 0x7E70, [ 587] = 0x6851,
-  [ 588] = 0x936C, [ 589] = 0x52F2, [ 590] = 0x541B, [ 591] = 0x85AB,
-  [ 592] = 0x8A13, [ 593] = 0x7FA4, [ 594] = 0x8ECD, [ 595] = 0x90E1,
-  [ 596] = 0x5366, [ 597] = 0x8888, [ 598] = 0x7941, [ 599] = 0x4FC2,
-  [ 600] = 0x50BE, [ 601] = 0x5211, [ 602] = 0x5144, [ 603] = 0x5553,
-  [ 604] = 0x572D, [ 605] = 0x73EA, [ 606] = 0x578B, [ 607] = 0x5951,
-  [ 608] = 0x5F62, [ 609] = 0x5F84, [ 610] = 0x6075, [ 611] = 0x6176,
-  [ 612] = 0x6167, [ 613] = 0x61A9, [ 614] = 0x63B2, [ 615] = 0x643A,
-  [ 616] = 0x656C, [ 617] = 0x666F, [ 618] = 0x6842, [ 619] = 0x6E13,
-  [ 620] = 0x7566, [ 621] = 0x7A3D, [ 622] = 0x7CFB, [ 623] = 0x7D4C,
-  [ 624] = 0x7D99, [ 625] = 0x7E4B, [ 626] = 0x7F6B, [ 627] = 0x830E,
-  [ 628] = 0x834A, [ 629] = 0x86CD, [ 630] = 0x8A08, [ 631] = 0x8A63,
-  [ 632] = 0x8B66, [ 633] = 0x8EFD, [ 634] = 0x981A, [ 635] = 0x9D8F,
-  [ 636] = 0x82B8, [ 637] = 0x8FCE, [ 638] = 0x9BE8, [ 640] = 0x5287,
-  [ 641] = 0x621F, [ 642] = 0x6483, [ 643] = 0x6FC0, [ 644] = 0x9699,
-  [ 645] = 0x6841, [ 646] = 0x5091, [ 647] = 0x6B20, [ 648] = 0x6C7A,
-  [ 649] = 0x6F54, [ 650] = 0x7A74, [ 651] = 0x7D50, [ 652] = 0x8840,
-  [ 653] = 0x8A23, [ 654] = 0x6708, [ 655] = 0x4EF6, [ 656] = 0x5039,
-  [ 657] = 0x5026, [ 658] = 0x5065, [ 659] = 0x517C, [ 660] = 0x5238,
-  [ 661] = 0x5263, [ 662] = 0x55A7, [ 663] = 0x570F, [ 664] = 0x5805,
-  [ 665] = 0x5ACC, [ 666] = 0x5EFA, [ 667] = 0x61B2, [ 668] = 0x61F8,
-  [ 669] = 0x62F3, [ 670] = 0x6372, [ 671] = 0x691C, [ 672] = 0x6A29,
-  [ 673] = 0x727D, [ 674] = 0x72AC, [ 675] = 0x732E, [ 676] = 0x7814,
-  [ 677] = 0x786F, [ 678] = 0x7D79, [ 679] = 0x770C, [ 680] = 0x80A9,
-  [ 681] = 0x898B, [ 682] = 0x8B19, [ 683] = 0x8CE2, [ 684] = 0x8ED2,
-  [ 685] = 0x9063, [ 686] = 0x9375, [ 687] = 0x967A, [ 688] = 0x9855,
-  [ 689] = 0x9A13, [ 690] = 0x9E78, [ 691] = 0x5143, [ 692] = 0x539F,
-  [ 693] = 0x53B3, [ 694] = 0x5E7B, [ 695] = 0x5F26, [ 696] = 0x6E1B,
-  [ 697] = 0x6E90, [ 698] = 0x7384, [ 699] = 0x73FE, [ 700] = 0x7D43,
-  [ 701] = 0x8237, [ 702] = 0x8A00, [ 703] = 0x8AFA, [ 704] = 0x9650,
-  [ 705] = 0x4E4E, [ 706] = 0x500B, [ 707] = 0x53E4, [ 708] = 0x547C,
-  [ 709] = 0x56FA, [ 710] = 0x59D1, [ 711] = 0x5B64, [ 712] = 0x5DF1,
-  [ 713] = 0x5EAB, [ 714] = 0x5F27, [ 715] = 0x6238, [ 716] = 0x6545,
-  [ 717] = 0x67AF, [ 718] = 0x6E56, [ 719] = 0x72D0, [ 720] = 0x7CCA,
-  [ 721] = 0x88B4, [ 722] = 0x80A1, [ 723] = 0x80E1, [ 724] = 0x83F0,
-  [ 725] = 0x864E, [ 726] = 0x8A87, [ 727] = 0x8DE8, [ 728] = 0x9237,
-  [ 729] = 0x96C7, [ 730] = 0x9867, [ 731] = 0x9F13, [ 732] = 0x4E94,
-  [ 733] = 0x4E92, [ 734] = 0x4F0D, [ 735] = 0x5348, [ 736] = 0x5449,
-  [ 737] = 0x543E, [ 738] = 0x5A2F, [ 739] = 0x5F8C, [ 740] = 0x5FA1,
-  [ 741] = 0x609F, [ 742] = 0x68A7, [ 743] = 0x6A8E, [ 744] = 0x745A,
-  [ 745] = 0x7881, [ 746] = 0x8A9E, [ 747] = 0x8AA4, [ 748] = 0x8B77,
-  [ 749] = 0x9190, [ 750] = 0x4E5E, [ 751] = 0x9BC9, [ 752] = 0x4EA4,
-  [ 753] = 0x4F7C, [ 754] = 0x4FAF, [ 755] = 0x5019, [ 756] = 0x5016,
-  [ 757] = 0x5149, [ 758] = 0x516C, [ 759] = 0x529F, [ 760] = 0x52B9,
-  [ 761] = 0x52FE, [ 762] = 0x539A, [ 763] = 0x53E3, [ 764] = 0x5411,
-  [ 768] = 0x540E, [ 769] = 0x5589, [ 770] = 0x5751, [ 771] = 0x57A2,
-  [ 772] = 0x597D, [ 773] = 0x5B54, [ 774] = 0x5B5D, [ 775] = 0x5B8F,
-  [ 776] = 0x5DE5, [ 777] = 0x5DE7, [ 778] = 0x5DF7, [ 779] = 0x5E78,
-  [ 780] = 0x5E83, [ 781] = 0x5E9A, [ 782] = 0x5EB7, [ 783] = 0x5F18,
-  [ 784] = 0x6052, [ 785] = 0x614C, [ 786] = 0x6297, [ 787] = 0x62D8,
-  [ 788] = 0x63A7, [ 789] = 0x653B, [ 790] = 0x6602, [ 791] = 0x6643,
-  [ 792] = 0x66F4, [ 793] = 0x676D, [ 794] = 0x6821, [ 795] = 0x6897,
-  [ 796] = 0x69CB, [ 797] = 0x6C5F, [ 798] = 0x6D2A, [ 799] = 0x6D69,
-  [ 800] = 0x6E2F, [ 801] = 0x6E9D, [ 802] = 0x7532, [ 803] = 0x7687,
-  [ 804] = 0x786C, [ 805] = 0x7A3F, [ 806] = 0x7CE0, [ 807] = 0x7D05,
-  [ 808] = 0x7D18, [ 809] = 0x7D5E, [ 810] = 0x7DB1, [ 811] = 0x8015,
-  [ 812] = 0x8003, [ 813] = 0x80AF, [ 814] = 0x80B1, [ 815] = 0x8154,
-  [ 816] = 0x818F, [ 817] = 0x822A, [ 818] = 0x8352, [ 819] = 0x884C,
-  [ 820] = 0x8861, [ 821] = 0x8B1B, [ 822] = 0x8CA2, [ 823] = 0x8CFC,
-  [ 824] = 0x90CA, [ 825] = 0x9175, [ 826] = 0x9271, [ 827] = 0x783F,
-  [ 828] = 0x92FC, [ 829] = 0x95A4, [ 830] = 0x964D, [ 832] = 0x9805,
-  [ 833] = 0x9999, [ 834] = 0x9AD8, [ 835] = 0x9D3B, [ 836] = 0x525B,
-  [ 837] = 0x52AB, [ 838] = 0x53F7, [ 839] = 0x5408, [ 840] = 0x58D5,
-  [ 841] = 0x62F7, [ 842] = 0x6FE0, [ 843] = 0x8C6A, [ 844] = 0x8F5F,
-  [ 845] = 0x9EB9, [ 846] = 0x514B, [ 847] = 0x523B, [ 848] = 0x544A,
-  [ 849] = 0x56FD, [ 850] = 0x7A40, [ 851] = 0x9177, [ 852] = 0x9D60,
-  [ 853] = 0x9ED2, [ 854] = 0x7344, [ 855] = 0x6F09, [ 856] = 0x8170,
-  [ 857] = 0x7511, [ 858] = 0x5FFD, [ 859] = 0x60DA, [ 860] = 0x9AA8,
-  [ 861] = 0x72DB, [ 862] = 0x8FBC, [ 863] = 0x6B64, [ 864] = 0x9803,
-  [ 865] = 0x4ECA, [ 866] = 0x56F0, [ 867] = 0x5764, [ 868] = 0x58BE,
-  [ 869] = 0x5A5A, [ 870] = 0x6068, [ 871] = 0x61C7, [ 872] = 0x660F,
-  [ 873] = 0x6606, [ 874] = 0x6839, [ 875] = 0x68B1, [ 876] = 0x6DF7,
-  [ 877] = 0x75D5, [ 878] = 0x7D3A, [ 879] = 0x826E, [ 880] = 0x9B42,
-  [ 881] = 0x4E9B, [ 882] = 0x4F50, [ 883] = 0x53C9, [ 884] = 0x5506,
-  [ 885] = 0x5D6F, [ 886] = 0x5DE6, [ 887] = 0x5DEE, [ 888] = 0x67FB,
-  [ 889] = 0x6C99, [ 890] = 0x7473, [ 891] = 0x7802, [ 892] = 0x8A50,
-  [ 893] = 0x9396, [ 894] = 0x88DF, [ 895] = 0x5750, [ 896] = 0x5EA7,
-  [ 897] = 0x632B, [ 898] = 0x50B5, [ 899] = 0x50AC, [ 900] = 0x518D,
-  [ 901] = 0x6700, [ 902] = 0x54C9, [ 903] = 0x585E, [ 904] = 0x59BB,
-  [ 905] = 0x5BB0, [ 906] = 0x5F69, [ 907] = 0x624D, [ 908] = 0x63A1,
-  [ 909] = 0x683D, [ 910] = 0x6B73, [ 911] = 0x6E08, [ 912] = 0x707D,
-  [ 913] = 0x91C7, [ 914] = 0x7280, [ 915] = 0x7815, [ 916] = 0x7826,
-  [ 917] = 0x796D, [ 918] = 0x658E, [ 919] = 0x7D30, [ 920] = 0x83DC,
-  [ 921] = 0x88C1, [ 922] = 0x8F09, [ 923] = 0x969B, [ 924] = 0x5264,
-  [ 925] = 0x5728, [ 926] = 0x6750, [ 927] = 0x7F6A, [ 928] = 0x8CA1,
-  [ 929] = 0x51B4, [ 930] = 0x5742, [ 931] = 0x962A, [ 932] = 0x583A,
-  [ 933] = 0x698A, [ 934] = 0x80B4, [ 935] = 0x54B2, [ 936] = 0x5D0E,
-  [ 937] = 0x57FC, [ 938] = 0x7895, [ 939] = 0x9DFA, [ 940] = 0x4F5C,
-  [ 941] = 0x524A, [ 942] = 0x548B, [ 943] = 0x643E, [ 944] = 0x6628,
-  [ 945] = 0x6714, [ 946] = 0x67F5, [ 947] = 0x7A84, [ 948] = 0x7B56,
-  [ 949] = 0x7D22, [ 950] = 0x932F, [ 951] = 0x685C, [ 952] = 0x9BAD,
-  [ 953] = 0x7B39, [ 954] = 0x5319, [ 955] = 0x518A, [ 956] = 0x5237,
-  [ 960] = 0x5BDF, [ 961] = 0x62F6, [ 962] = 0x64AE, [ 963] = 0x64E6,
-  [ 964] = 0x672D, [ 965] = 0x6BBA, [ 966] = 0x85A9, [ 967] = 0x96D1,
-  [ 968] = 0x7690, [ 969] = 0x9BD6, [ 970] = 0x634C, [ 971] = 0x9306,
-  [ 972] = 0x9BAB, [ 973] = 0x76BF, [ 974] = 0x6652, [ 975] = 0x4E09,
-  [ 976] = 0x5098, [ 977] = 0x53C2, [ 978] = 0x5C71, [ 979] = 0x60E8,
-  [ 980] = 0x6492, [ 981] = 0x6563, [ 982] = 0x685F, [ 983] = 0x71E6,
-  [ 984] = 0x73CA, [ 985] = 0x7523, [ 986] = 0x7B97, [ 987] = 0x7E82,
-  [ 988] = 0x8695, [ 989] = 0x8B83, [ 990] = 0x8CDB, [ 991] = 0x9178,
-  [ 992] = 0x9910, [ 993] = 0x65AC, [ 994] = 0x66AB, [ 995] = 0x6B8B,
-  [ 996] = 0x4ED5, [ 997] = 0x4ED4, [ 998] = 0x4F3A, [ 999] = 0x4F7F,
-  [1000] = 0x523A, [1001] = 0x53F8, [1002] = 0x53F2, [1003] = 0x55E3,
-  [1004] = 0x56DB, [1005] = 0x58EB, [1006] = 0x59CB, [1007] = 0x59C9,
-  [1008] = 0x59FF, [1009] = 0x5B50, [1010] = 0x5C4D, [1011] = 0x5E02,
-  [1012] = 0x5E2B, [1013] = 0x5FD7, [1014] = 0x601D, [1015] = 0x6307,
-  [1016] = 0x652F, [1017] = 0x5B5C, [1018] = 0x65AF, [1019] = 0x65BD,
-  [1020] = 0x65E8, [1021] = 0x679D, [1022] = 0x6B62, [1024] = 0x6B7B,
-  [1025] = 0x6C0F, [1026] = 0x7345, [1027] = 0x7949, [1028] = 0x79C1,
-  [1029] = 0x7CF8, [1030] = 0x7D19, [1031] = 0x7D2B, [1032] = 0x80A2,
-  [1033] = 0x8102, [1034] = 0x81F3, [1035] = 0x8996, [1036] = 0x8A5E,
-  [1037] = 0x8A69, [1038] = 0x8A66, [1039] = 0x8A8C, [1040] = 0x8AEE,
-  [1041] = 0x8CC7, [1042] = 0x8CDC, [1043] = 0x96CC, [1044] = 0x98FC,
-  [1045] = 0x6B6F, [1046] = 0x4E8B, [1047] = 0x4F3C, [1048] = 0x4F8D,
-  [1049] = 0x5150, [1050] = 0x5B57, [1051] = 0x5BFA, [1052] = 0x6148,
-  [1053] = 0x6301, [1054] = 0x6642, [1055] = 0x6B21, [1056] = 0x6ECB,
-  [1057] = 0x6CBB, [1058] = 0x723E, [1059] = 0x74BD, [1060] = 0x75D4,
-  [1061] = 0x78C1, [1062] = 0x793A, [1063] = 0x800C, [1064] = 0x8033,
-  [1065] = 0x81EA, [1066] = 0x8494, [1067] = 0x8F9E, [1068] = 0x6C50,
-  [1069] = 0x9E7F, [1070] = 0x5F0F, [1071] = 0x8B58, [1072] = 0x9D2B,
-  [1073] = 0x7AFA, [1074] = 0x8EF8, [1075] = 0x5B8D, [1076] = 0x96EB,
-  [1077] = 0x4E03, [1078] = 0x53F1, [1079] = 0x57F7, [1080] = 0x5931,
-  [1081] = 0x5AC9, [1082] = 0x5BA4, [1083] = 0x6089, [1084] = 0x6E7F,
-  [1085] = 0x6F06, [1086] = 0x75BE, [1087] = 0x8CEA, [1088] = 0x5B9F,
-  [1089] = 0x8500, [1090] = 0x7BE0, [1091] = 0x5072, [1092] = 0x67F4,
-  [1093] = 0x829D, [1094] = 0x5C61, [1095] = 0x854A, [1096] = 0x7E1E,
-  [1097] = 0x820E, [1098] = 0x5199, [1099] = 0x5C04, [1100] = 0x6368,
-  [1101] = 0x8D66, [1102] = 0x659C, [1103] = 0x716E, [1104] = 0x793E,
-  [1105] = 0x7D17, [1106] = 0x8005, [1107] = 0x8B1D, [1108] = 0x8ECA,
-  [1109] = 0x906E, [1110] = 0x86C7, [1111] = 0x90AA, [1112] = 0x501F,
-  [1113] = 0x52FA, [1114] = 0x5C3A, [1115] = 0x6753, [1116] = 0x707C,
-  [1117] = 0x7235, [1118] = 0x914C, [1119] = 0x91C8, [1120] = 0x932B,
-  [1121] = 0x82E5, [1122] = 0x5BC2, [1123] = 0x5F31, [1124] = 0x60F9,
-  [1125] = 0x4E3B, [1126] = 0x53D6, [1127] = 0x5B88, [1128] = 0x624B,
-  [1129] = 0x6731, [1130] = 0x6B8A, [1131] = 0x72E9, [1132] = 0x73E0,
-  [1133] = 0x7A2E, [1134] = 0x816B, [1135] = 0x8DA3, [1136] = 0x9152,
-  [1137] = 0x9996, [1138] = 0x5112, [1139] = 0x53D7, [1140] = 0x546A,
-  [1141] = 0x5BFF, [1142] = 0x6388, [1143] = 0x6A39, [1144] = 0x7DAC,
-  [1145] = 0x9700, [1146] = 0x56DA, [1147] = 0x53CE, [1148] = 0x5468,
-  [1152] = 0x5B97, [1153] = 0x5C31, [1154] = 0x5DDE, [1155] = 0x4FEE,
-  [1156] = 0x6101, [1157] = 0x62FE, [1158] = 0x6D32, [1159] = 0x79C0,
-  [1160] = 0x79CB, [1161] = 0x7D42, [1162] = 0x7E4D, [1163] = 0x7FD2,
-  [1164] = 0x81ED, [1165] = 0x821F, [1166] = 0x8490, [1167] = 0x8846,
-  [1168] = 0x8972, [1169] = 0x8B90, [1170] = 0x8E74, [1171] = 0x8F2F,
-  [1172] = 0x9031, [1173] = 0x914B, [1174] = 0x916C, [1175] = 0x96C6,
-  [1176] = 0x919C, [1177] = 0x4EC0, [1178] = 0x4F4F, [1179] = 0x5145,
-  [1180] = 0x5341, [1181] = 0x5F93, [1182] = 0x620E, [1183] = 0x67D4,
-  [1184] = 0x6C41, [1185] = 0x6E0B, [1186] = 0x7363, [1187] = 0x7E26,
-  [1188] = 0x91CD, [1189] = 0x9283, [1190] = 0x53D4, [1191] = 0x5919,
-  [1192] = 0x5BBF, [1193] = 0x6DD1, [1194] = 0x795D, [1195] = 0x7E2E,
-  [1196] = 0x7C9B, [1197] = 0x587E, [1198] = 0x719F, [1199] = 0x51FA,
-  [1200] = 0x8853, [1201] = 0x8FF0, [1202] = 0x4FCA, [1203] = 0x5CFB,
-  [1204] = 0x6625, [1205] = 0x77AC, [1206] = 0x7AE3, [1207] = 0x821C,
-  [1208] = 0x99FF, [1209] = 0x51C6, [1210] = 0x5FAA, [1211] = 0x65EC,
-  [1212] = 0x696F, [1213] = 0x6B89, [1214] = 0x6DF3, [1216] = 0x6E96,
-  [1217] = 0x6F64, [1218] = 0x76FE, [1219] = 0x7D14, [1220] = 0x5DE1,
-  [1221] = 0x9075, [1222] = 0x9187, [1223] = 0x9806, [1224] = 0x51E6,
-  [1225] = 0x521D, [1226] = 0x6240, [1227] = 0x6691, [1228] = 0x66D9,
-  [1229] = 0x6E1A, [1230] = 0x5EB6, [1231] = 0x7DD2, [1232] = 0x7F72,
-  [1233] = 0x66F8, [1234] = 0x85AF, [1235] = 0x85F7, [1236] = 0x8AF8,
-  [1237] = 0x52A9, [1238] = 0x53D9, [1239] = 0x5973, [1240] = 0x5E8F,
-  [1241] = 0x5F90, [1242] = 0x6055, [1243] = 0x92E4, [1244] = 0x9664,
-  [1245] = 0x50B7, [1246] = 0x511F, [1247] = 0x52DD, [1248] = 0x5320,
-  [1249] = 0x5347, [1250] = 0x53EC, [1251] = 0x54E8, [1252] = 0x5546,
-  [1253] = 0x5531, [1254] = 0x5617, [1255] = 0x5968, [1256] = 0x59BE,
-  [1257] = 0x5A3C, [1258] = 0x5BB5, [1259] = 0x5C06, [1260] = 0x5C0F,
-  [1261] = 0x5C11, [1262] = 0x5C1A, [1263] = 0x5E84, [1264] = 0x5E8A,
-  [1265] = 0x5EE0, [1266] = 0x5F70, [1267] = 0x627F, [1268] = 0x6284,
-  [1269] = 0x62DB, [1270] = 0x638C, [1271] = 0x6377, [1272] = 0x6607,
-  [1273] = 0x660C, [1274] = 0x662D, [1275] = 0x6676, [1276] = 0x677E,
-  [1277] = 0x68A2, [1278] = 0x6A1F, [1279] = 0x6A35, [1280] = 0x6CBC,
-  [1281] = 0x6D88, [1282] = 0x6E09, [1283] = 0x6E58, [1284] = 0x713C,
-  [1285] = 0x7126, [1286] = 0x7167, [1287] = 0x75C7, [1288] = 0x7701,
-  [1289] = 0x785D, [1290] = 0x7901, [1291] = 0x7965, [1292] = 0x79F0,
-  [1293] = 0x7AE0, [1294] = 0x7B11, [1295] = 0x7CA7, [1296] = 0x7D39,
-  [1297] = 0x8096, [1298] = 0x83D6, [1299] = 0x848B, [1300] = 0x8549,
-  [1301] = 0x885D, [1302] = 0x88F3, [1303] = 0x8A1F, [1304] = 0x8A3C,
-  [1305] = 0x8A54, [1306] = 0x8A73, [1307] = 0x8C61, [1308] = 0x8CDE,
-  [1309] = 0x91A4, [1310] = 0x9266, [1311] = 0x937E, [1312] = 0x9418,
-  [1313] = 0x969C, [1314] = 0x9798, [1315] = 0x4E0A, [1316] = 0x4E08,
-  [1317] = 0x4E1E, [1318] = 0x4E57, [1319] = 0x5197, [1320] = 0x5270,
-  [1321] = 0x57CE, [1322] = 0x5834, [1323] = 0x58CC, [1324] = 0x5B22,
-  [1325] = 0x5E38, [1326] = 0x60C5, [1327] = 0x64FE, [1328] = 0x6761,
-  [1329] = 0x6756, [1330] = 0x6D44, [1331] = 0x72B6, [1332] = 0x7573,
-  [1333] = 0x7A63, [1334] = 0x84B8, [1335] = 0x8B72, [1336] = 0x91B8,
-  [1337] = 0x9320, [1338] = 0x5631, [1339] = 0x57F4, [1340] = 0x98FE,
-  [1344] = 0x62ED, [1345] = 0x690D, [1346] = 0x6B96, [1347] = 0x71ED,
-  [1348] = 0x7E54, [1349] = 0x8077, [1350] = 0x8272, [1351] = 0x89E6,
-  [1352] = 0x98DF, [1353] = 0x8755, [1354] = 0x8FB1, [1355] = 0x5C3B,
-  [1356] = 0x4F38, [1357] = 0x4FE1, [1358] = 0x4FB5, [1359] = 0x5507,
-  [1360] = 0x5A20, [1361] = 0x5BDD, [1362] = 0x5BE9, [1363] = 0x5FC3,
-  [1364] = 0x614E, [1365] = 0x632F, [1366] = 0x65B0, [1367] = 0x664B,
-  [1368] = 0x68EE, [1369] = 0x699B, [1370] = 0x6D78, [1371] = 0x6DF1,
-  [1372] = 0x7533, [1373] = 0x75B9, [1374] = 0x771F, [1375] = 0x795E,
-  [1376] = 0x79E6, [1377] = 0x7D33, [1378] = 0x81E3, [1379] = 0x82AF,
-  [1380] = 0x85AA, [1381] = 0x89AA, [1382] = 0x8A3A, [1383] = 0x8EAB,
-  [1384] = 0x8F9B, [1385] = 0x9032, [1386] = 0x91DD, [1387] = 0x9707,
-  [1388] = 0x4EBA, [1389] = 0x4EC1, [1390] = 0x5203, [1391] = 0x5875,
-  [1392] = 0x58EC, [1393] = 0x5C0B, [1394] = 0x751A, [1395] = 0x5C3D,
-  [1396] = 0x814E, [1397] = 0x8A0A, [1398] = 0x8FC5, [1399] = 0x9663,
-  [1400] = 0x976D, [1401] = 0x7B25, [1402] = 0x8ACF, [1403] = 0x9808,
-  [1404] = 0x9162, [1405] = 0x56F3, [1406] = 0x53A8, [1408] = 0x9017,
-  [1409] = 0x5439, [1410] = 0x5782, [1411] = 0x5E25, [1412] = 0x63A8,
-  [1413] = 0x6C34, [1414] = 0x708A, [1415] = 0x7761, [1416] = 0x7C8B,
-  [1417] = 0x7FE0, [1418] = 0x8870, [1419] = 0x9042, [1420] = 0x9154,
-  [1421] = 0x9310, [1422] = 0x9318, [1423] = 0x968F, [1424] = 0x745E,
-  [1425] = 0x9AC4, [1426] = 0x5D07, [1427] = 0x5D69, [1428] = 0x6570,
-  [1429] = 0x67A2, [1430] = 0x8DA8, [1431] = 0x96DB, [1432] = 0x636E,
-  [1433] = 0x6749, [1434] = 0x6919, [1435] = 0x83C5, [1436] = 0x9817,
-  [1437] = 0x96C0, [1438] = 0x88FE, [1439] = 0x6F84, [1440] = 0x647A,
-  [1441] = 0x5BF8, [1442] = 0x4E16, [1443] = 0x702C, [1444] = 0x755D,
-  [1445] = 0x662F, [1446] = 0x51C4, [1447] = 0x5236, [1448] = 0x52E2,
-  [1449] = 0x59D3, [1450] = 0x5F81, [1451] = 0x6027, [1452] = 0x6210,
-  [1453] = 0x653F, [1454] = 0x6574, [1455] = 0x661F, [1456] = 0x6674,
-  [1457] = 0x68F2, [1458] = 0x6816, [1459] = 0x6B63, [1460] = 0x6E05,
-  [1461] = 0x7272, [1462] = 0x751F, [1463] = 0x76DB, [1464] = 0x7CBE,
-  [1465] = 0x8056, [1466] = 0x58F0, [1467] = 0x88FD, [1468] = 0x897F,
-  [1469] = 0x8AA0, [1470] = 0x8A93, [1471] = 0x8ACB, [1472] = 0x901D,
-  [1473] = 0x9192, [1474] = 0x9752, [1475] = 0x9759, [1476] = 0x6589,
-  [1477] = 0x7A0E, [1478] = 0x8106, [1479] = 0x96BB, [1480] = 0x5E2D,
-  [1481] = 0x60DC, [1482] = 0x621A, [1483] = 0x65A5, [1484] = 0x6614,
-  [1485] = 0x6790, [1486] = 0x77F3, [1487] = 0x7A4D, [1488] = 0x7C4D,
-  [1489] = 0x7E3E, [1490] = 0x810A, [1491] = 0x8CAC, [1492] = 0x8D64,
-  [1493] = 0x8DE1, [1494] = 0x8E5F, [1495] = 0x78A9, [1496] = 0x5207,
-  [1497] = 0x62D9, [1498] = 0x63A5, [1499] = 0x6442, [1500] = 0x6298,
-  [1501] = 0x8A2D, [1502] = 0x7A83, [1503] = 0x7BC0, [1504] = 0x8AAC,
-  [1505] = 0x96EA, [1506] = 0x7D76, [1507] = 0x820C, [1508] = 0x8749,
-  [1509] = 0x4ED9, [1510] = 0x5148, [1511] = 0x5343, [1512] = 0x5360,
-  [1513] = 0x5BA3, [1514] = 0x5C02, [1515] = 0x5C16, [1516] = 0x5DDD,
-  [1517] = 0x6226, [1518] = 0x6247, [1519] = 0x64B0, [1520] = 0x6813,
-  [1521] = 0x6834, [1522] = 0x6CC9, [1523] = 0x6D45, [1524] = 0x6D17,
-  [1525] = 0x67D3, [1526] = 0x6F5C, [1527] = 0x714E, [1528] = 0x717D,
-  [1529] = 0x65CB, [1530] = 0x7A7F, [1531] = 0x7BAD, [1532] = 0x7DDA,
-  [1536] = 0x7E4A, [1537] = 0x7FA8, [1538] = 0x817A, [1539] = 0x821B,
-  [1540] = 0x8239, [1541] = 0x85A6, [1542] = 0x8A6E, [1543] = 0x8CCE,
-  [1544] = 0x8DF5, [1545] = 0x9078, [1546] = 0x9077, [1547] = 0x92AD,
-  [1548] = 0x9291, [1549] = 0x9583, [1550] = 0x9BAE, [1551] = 0x524D,
-  [1552] = 0x5584, [1553] = 0x6F38, [1554] = 0x7136, [1555] = 0x5168,
-  [1556] = 0x7985, [1557] = 0x7E55, [1558] = 0x81B3, [1559] = 0x7CCE,
-  [1560] = 0x564C, [1561] = 0x5851, [1562] = 0x5CA8, [1563] = 0x63AA,
-  [1564] = 0x66FE, [1565] = 0x66FD, [1566] = 0x695A, [1567] = 0x72D9,
-  [1568] = 0x758F, [1569] = 0x758E, [1570] = 0x790E, [1571] = 0x7956,
-  [1572] = 0x79DF, [1573] = 0x7C97, [1574] = 0x7D20, [1575] = 0x7D44,
-  [1576] = 0x8607, [1577] = 0x8A34, [1578] = 0x963B, [1579] = 0x9061,
-  [1580] = 0x9F20, [1581] = 0x50E7, [1582] = 0x5275, [1583] = 0x53CC,
-  [1584] = 0x53E2, [1585] = 0x5009, [1586] = 0x55AA, [1587] = 0x58EE,
-  [1588] = 0x594F, [1589] = 0x723D, [1590] = 0x5B8B, [1591] = 0x5C64,
-  [1592] = 0x531D, [1593] = 0x60E3, [1594] = 0x60F3, [1595] = 0x635C,
-  [1596] = 0x6383, [1597] = 0x633F, [1598] = 0x63BB, [1600] = 0x64CD,
-  [1601] = 0x65E9, [1602] = 0x66F9, [1603] = 0x5DE3, [1604] = 0x69CD,
-  [1605] = 0x69FD, [1606] = 0x6F15, [1607] = 0x71E5, [1608] = 0x4E89,
-  [1609] = 0x75E9, [1610] = 0x76F8, [1611] = 0x7A93, [1612] = 0x7CDF,
-  [1613] = 0x7DCF, [1614] = 0x7D9C, [1615] = 0x8061, [1616] = 0x8349,
-  [1617] = 0x8358, [1618] = 0x846C, [1619] = 0x84BC, [1620] = 0x85FB,
-  [1621] = 0x88C5, [1622] = 0x8D70, [1623] = 0x9001, [1624] = 0x906D,
-  [1625] = 0x9397, [1626] = 0x971C, [1627] = 0x9A12, [1628] = 0x50CF,
-  [1629] = 0x5897, [1630] = 0x618E, [1631] = 0x81D3, [1632] = 0x8535,
-  [1633] = 0x8D08, [1634] = 0x9020, [1635] = 0x4FC3, [1636] = 0x5074,
-  [1637] = 0x5247, [1638] = 0x5373, [1639] = 0x606F, [1640] = 0x6349,
-  [1641] = 0x675F, [1642] = 0x6E2C, [1643] = 0x8DB3, [1644] = 0x901F,
-  [1645] = 0x4FD7, [1646] = 0x5C5E, [1647] = 0x8CCA, [1648] = 0x65CF,
-  [1649] = 0x7D9A, [1650] = 0x5352, [1651] = 0x8896, [1652] = 0x5176,
-  [1653] = 0x63C3, [1654] = 0x5B58, [1655] = 0x5B6B, [1656] = 0x5C0A,
-  [1657] = 0x640D, [1658] = 0x6751, [1659] = 0x905C, [1660] = 0x4ED6,
-  [1661] = 0x591A, [1662] = 0x592A, [1663] = 0x6C70, [1664] = 0x8A51,
-  [1665] = 0x553E, [1666] = 0x5815, [1667] = 0x59A5, [1668] = 0x60F0,
-  [1669] = 0x6253, [1670] = 0x67C1, [1671] = 0x8235, [1672] = 0x6955,
-  [1673] = 0x9640, [1674] = 0x99C4, [1675] = 0x9A28, [1676] = 0x4F53,
-  [1677] = 0x5806, [1678] = 0x5BFE, [1679] = 0x8010, [1680] = 0x5CB1,
-  [1681] = 0x5E2F, [1682] = 0x5F85, [1683] = 0x6020, [1684] = 0x614B,
-  [1685] = 0x6234, [1686] = 0x66FF, [1687] = 0x6CF0, [1688] = 0x6EDE,
-  [1689] = 0x80CE, [1690] = 0x817F, [1691] = 0x82D4, [1692] = 0x888B,
-  [1693] = 0x8CB8, [1694] = 0x9000, [1695] = 0x902E, [1696] = 0x968A,
-  [1697] = 0x9EDB, [1698] = 0x9BDB, [1699] = 0x4EE3, [1700] = 0x53F0,
-  [1701] = 0x5927, [1702] = 0x7B2C, [1703] = 0x918D, [1704] = 0x984C,
-  [1705] = 0x9DF9, [1706] = 0x6EDD, [1707] = 0x7027, [1708] = 0x5353,
-  [1709] = 0x5544, [1710] = 0x5B85, [1711] = 0x6258, [1712] = 0x629E,
-  [1713] = 0x62D3, [1714] = 0x6CA2, [1715] = 0x6FEF, [1716] = 0x7422,
-  [1717] = 0x8A17, [1718] = 0x9438, [1719] = 0x6FC1, [1720] = 0x8AFE,
-  [1721] = 0x8338, [1722] = 0x51E7, [1723] = 0x86F8, [1724] = 0x53EA,
-  [1728] = 0x53E9, [1729] = 0x4F46, [1730] = 0x9054, [1731] = 0x8FB0,
-  [1732] = 0x596A, [1733] = 0x8131, [1734] = 0x5DFD, [1735] = 0x7AEA,
-  [1736] = 0x8FBF, [1737] = 0x68DA, [1738] = 0x8C37, [1739] = 0x72F8,
-  [1740] = 0x9C48, [1741] = 0x6A3D, [1742] = 0x8AB0, [1743] = 0x4E39,
-  [1744] = 0x5358, [1745] = 0x5606, [1746] = 0x5766, [1747] = 0x62C5,
-  [1748] = 0x63A2, [1749] = 0x65E6, [1750] = 0x6B4E, [1751] = 0x6DE1,
-  [1752] = 0x6E5B, [1753] = 0x70AD, [1754] = 0x77ED, [1755] = 0x7AEF,
-  [1756] = 0x7BAA, [1757] = 0x7DBB, [1758] = 0x803D, [1759] = 0x80C6,
-  [1760] = 0x86CB, [1761] = 0x8A95, [1762] = 0x935B, [1763] = 0x56E3,
-  [1764] = 0x58C7, [1765] = 0x5F3E, [1766] = 0x65AD, [1767] = 0x6696,
-  [1768] = 0x6A80, [1769] = 0x6BB5, [1770] = 0x7537, [1771] = 0x8AC7,
-  [1772] = 0x5024, [1773] = 0x77E5, [1774] = 0x5730, [1775] = 0x5F1B,
-  [1776] = 0x6065, [1777] = 0x667A, [1778] = 0x6C60, [1779] = 0x75F4,
-  [1780] = 0x7A1A, [1781] = 0x7F6E, [1782] = 0x81F4, [1783] = 0x8718,
-  [1784] = 0x9045, [1785] = 0x99B3, [1786] = 0x7BC9, [1787] = 0x755C,
-  [1788] = 0x7AF9, [1789] = 0x7B51, [1790] = 0x84C4, [1792] = 0x9010,
-  [1793] = 0x79E9, [1794] = 0x7A92, [1795] = 0x8336, [1796] = 0x5AE1,
-  [1797] = 0x7740, [1798] = 0x4E2D, [1799] = 0x4EF2, [1800] = 0x5B99,
-  [1801] = 0x5FE0, [1802] = 0x62BD, [1803] = 0x663C, [1804] = 0x67F1,
-  [1805] = 0x6CE8, [1806] = 0x866B, [1807] = 0x8877, [1808] = 0x8A3B,
-  [1809] = 0x914E, [1810] = 0x92F3, [1811] = 0x99D0, [1812] = 0x6A17,
-  [1813] = 0x7026, [1814] = 0x732A, [1815] = 0x82E7, [1816] = 0x8457,
-  [1817] = 0x8CAF, [1818] = 0x4E01, [1819] = 0x5146, [1820] = 0x51CB,
-  [1821] = 0x558B, [1822] = 0x5BF5, [1823] = 0x5E16, [1824] = 0x5E33,
-  [1825] = 0x5E81, [1826] = 0x5F14, [1827] = 0x5F35, [1828] = 0x5F6B,
-  [1829] = 0x5FB4, [1830] = 0x61F2, [1831] = 0x6311, [1832] = 0x66A2,
-  [1833] = 0x671D, [1834] = 0x6F6E, [1835] = 0x7252, [1836] = 0x753A,
-  [1837] = 0x773A, [1838] = 0x8074, [1839] = 0x8139, [1840] = 0x8178,
-  [1841] = 0x8776, [1842] = 0x8ABF, [1843] = 0x8ADC, [1844] = 0x8D85,
-  [1845] = 0x8DF3, [1846] = 0x929A, [1847] = 0x9577, [1848] = 0x9802,
-  [1849] = 0x9CE5, [1850] = 0x52C5, [1851] = 0x6357, [1852] = 0x76F4,
-  [1853] = 0x6715, [1854] = 0x6C88, [1855] = 0x73CD, [1856] = 0x8CC3,
-  [1857] = 0x93AE, [1858] = 0x9673, [1859] = 0x6D25, [1860] = 0x589C,
-  [1861] = 0x690E, [1862] = 0x69CC, [1863] = 0x8FFD, [1864] = 0x939A,
-  [1865] = 0x75DB, [1866] = 0x901A, [1867] = 0x585A, [1868] = 0x6802,
-  [1869] = 0x63B4, [1870] = 0x69FB, [1871] = 0x4F43, [1872] = 0x6F2C,
-  [1873] = 0x67D8, [1874] = 0x8FBB, [1875] = 0x8526, [1876] = 0x7DB4,
-  [1877] = 0x9354, [1878] = 0x693F, [1879] = 0x6F70, [1880] = 0x576A,
-  [1881] = 0x58F7, [1882] = 0x5B2C, [1883] = 0x7D2C, [1884] = 0x722A,
-  [1885] = 0x540A, [1886] = 0x91E3, [1887] = 0x9DB4, [1888] = 0x4EAD,
-  [1889] = 0x4F4E, [1890] = 0x505C, [1891] = 0x5075, [1892] = 0x5243,
-  [1893] = 0x8C9E, [1894] = 0x5448, [1895] = 0x5824, [1896] = 0x5B9A,
-  [1897] = 0x5E1D, [1898] = 0x5E95, [1899] = 0x5EAD, [1900] = 0x5EF7,
-  [1901] = 0x5F1F, [1902] = 0x608C, [1903] = 0x62B5, [1904] = 0x633A,
-  [1905] = 0x63D0, [1906] = 0x68AF, [1907] = 0x6C40, [1908] = 0x7887,
-  [1909] = 0x798E, [1910] = 0x7A0B, [1911] = 0x7DE0, [1912] = 0x8247,
-  [1913] = 0x8A02, [1914] = 0x8AE6, [1915] = 0x8E44, [1916] = 0x9013,
-  [1920] = 0x90B8, [1921] = 0x912D, [1922] = 0x91D8, [1923] = 0x9F0E,
-  [1924] = 0x6CE5, [1925] = 0x6458, [1926] = 0x64E2, [1927] = 0x6575,
-  [1928] = 0x6EF4, [1929] = 0x7684, [1930] = 0x7B1B, [1931] = 0x9069,
-  [1932] = 0x93D1, [1933] = 0x6EBA, [1934] = 0x54F2, [1935] = 0x5FB9,
-  [1936] = 0x64A4, [1937] = 0x8F4D, [1938] = 0x8FED, [1939] = 0x9244,
-  [1940] = 0x5178, [1941] = 0x586B, [1942] = 0x5929, [1943] = 0x5C55,
-  [1944] = 0x5E97, [1945] = 0x6DFB, [1946] = 0x7E8F, [1947] = 0x751C,
-  [1948] = 0x8CBC, [1949] = 0x8EE2, [1950] = 0x985B, [1951] = 0x70B9,
-  [1952] = 0x4F1D, [1953] = 0x6BBF, [1954] = 0x6FB1, [1955] = 0x7530,
-  [1956] = 0x96FB, [1957] = 0x514E, [1958] = 0x5410, [1959] = 0x5835,
-  [1960] = 0x5857, [1961] = 0x59AC, [1962] = 0x5C60, [1963] = 0x5F92,
-  [1964] = 0x6597, [1965] = 0x675C, [1966] = 0x6E21, [1967] = 0x767B,
-  [1968] = 0x83DF, [1969] = 0x8CED, [1970] = 0x9014, [1971] = 0x90FD,
-  [1972] = 0x934D, [1973] = 0x7825, [1974] = 0x783A, [1975] = 0x52AA,
-  [1976] = 0x5EA6, [1977] = 0x571F, [1978] = 0x5974, [1979] = 0x6012,
-  [1980] = 0x5012, [1981] = 0x515A, [1982] = 0x51AC, [1984] = 0x51CD,
-  [1985] = 0x5200, [1986] = 0x5510, [1987] = 0x5854, [1988] = 0x5858,
-  [1989] = 0x5957, [1990] = 0x5B95, [1991] = 0x5CF6, [1992] = 0x5D8B,
-  [1993] = 0x60BC, [1994] = 0x6295, [1995] = 0x642D, [1996] = 0x6771,
-  [1997] = 0x6843, [1998] = 0x68BC, [1999] = 0x68DF, [2000] = 0x76D7,
-  [2001] = 0x6DD8, [2002] = 0x6E6F, [2003] = 0x6D9B, [2004] = 0x706F,
-  [2005] = 0x71C8, [2006] = 0x5F53, [2007] = 0x75D8, [2008] = 0x7977,
-  [2009] = 0x7B49, [2010] = 0x7B54, [2011] = 0x7B52, [2012] = 0x7CD6,
-  [2013] = 0x7D71, [2014] = 0x5230, [2015] = 0x8463, [2016] = 0x8569,
-  [2017] = 0x85E4, [2018] = 0x8A0E, [2019] = 0x8B04, [2020] = 0x8C46,
-  [2021] = 0x8E0F, [2022] = 0x9003, [2023] = 0x900F, [2024] = 0x9419,
-  [2025] = 0x9676, [2026] = 0x982D, [2027] = 0x9A30, [2028] = 0x95D8,
-  [2029] = 0x50CD, [2030] = 0x52D5, [2031] = 0x540C, [2032] = 0x5802,
-  [2033] = 0x5C0E, [2034] = 0x61A7, [2035] = 0x649E, [2036] = 0x6D1E,
-  [2037] = 0x77B3, [2038] = 0x7AE5, [2039] = 0x80F4, [2040] = 0x8404,
-  [2041] = 0x9053, [2042] = 0x9285, [2043] = 0x5CE0, [2044] = 0x9D07,
-  [2045] = 0x533F, [2046] = 0x5F97, [2047] = 0x5FB3, [2048] = 0x6D9C,
-  [2049] = 0x7279, [2050] = 0x7763, [2051] = 0x79BF, [2052] = 0x7BE4,
-  [2053] = 0x6BD2, [2054] = 0x72EC, [2055] = 0x8AAD, [2056] = 0x6803,
-  [2057] = 0x6A61, [2058] = 0x51F8, [2059] = 0x7A81, [2060] = 0x6934,
-  [2061] = 0x5C4A, [2062] = 0x9CF6, [2063] = 0x82EB, [2064] = 0x5BC5,
-  [2065] = 0x9149, [2066] = 0x701E, [2067] = 0x5678, [2068] = 0x5C6F,
-  [2069] = 0x60C7, [2070] = 0x6566, [2071] = 0x6C8C, [2072] = 0x8C5A,
-  [2073] = 0x9041, [2074] = 0x9813, [2075] = 0x5451, [2076] = 0x66C7,
-  [2077] = 0x920D, [2078] = 0x5948, [2079] = 0x90A3, [2080] = 0x5185,
-  [2081] = 0x4E4D, [2082] = 0x51EA, [2083] = 0x8599, [2084] = 0x8B0E,
-  [2085] = 0x7058, [2086] = 0x637A, [2087] = 0x934B, [2088] = 0x6962,
-  [2089] = 0x99B4, [2090] = 0x7E04, [2091] = 0x7577, [2092] = 0x5357,
-  [2093] = 0x6960, [2094] = 0x8EDF, [2095] = 0x96E3, [2096] = 0x6C5D,
-  [2097] = 0x4E8C, [2098] = 0x5C3C, [2099] = 0x5F10, [2100] = 0x8FE9,
-  [2101] = 0x5302, [2102] = 0x8CD1, [2103] = 0x8089, [2104] = 0x8679,
-  [2105] = 0x5EFF, [2106] = 0x65E5, [2107] = 0x4E73, [2108] = 0x5165,
-  [2112] = 0x5982, [2113] = 0x5C3F, [2114] = 0x97EE, [2115] = 0x4EFB,
-  [2116] = 0x598A, [2117] = 0x5FCD, [2118] = 0x8A8D, [2119] = 0x6FE1,
-  [2120] = 0x79B0, [2121] = 0x7962, [2122] = 0x5BE7, [2123] = 0x8471,
-  [2124] = 0x732B, [2125] = 0x71B1, [2126] = 0x5E74, [2127] = 0x5FF5,
-  [2128] = 0x637B, [2129] = 0x649A, [2130] = 0x71C3, [2131] = 0x7C98,
-  [2132] = 0x4E43, [2133] = 0x5EFC, [2134] = 0x4E4B, [2135] = 0x57DC,
-  [2136] = 0x56A2, [2137] = 0x60A9, [2138] = 0x6FC3, [2139] = 0x7D0D,
-  [2140] = 0x80FD, [2141] = 0x8133, [2142] = 0x81BF, [2143] = 0x8FB2,
-  [2144] = 0x8997, [2145] = 0x86A4, [2146] = 0x5DF4, [2147] = 0x628A,
-  [2148] = 0x64AD, [2149] = 0x8987, [2150] = 0x6777, [2151] = 0x6CE2,
-  [2152] = 0x6D3E, [2153] = 0x7436, [2154] = 0x7834, [2155] = 0x5A46,
-  [2156] = 0x7F75, [2157] = 0x82AD, [2158] = 0x99AC, [2159] = 0x4FF3,
-  [2160] = 0x5EC3, [2161] = 0x62DD, [2162] = 0x6392, [2163] = 0x6557,
-  [2164] = 0x676F, [2165] = 0x76C3, [2166] = 0x724C, [2167] = 0x80CC,
-  [2168] = 0x80BA, [2169] = 0x8F29, [2170] = 0x914D, [2171] = 0x500D,
-  [2172] = 0x57F9, [2173] = 0x5A92, [2174] = 0x6885, [2176] = 0x6973,
-  [2177] = 0x7164, [2178] = 0x72FD, [2179] = 0x8CB7, [2180] = 0x58F2,
-  [2181] = 0x8CE0, [2182] = 0x966A, [2183] = 0x9019, [2184] = 0x877F,
-  [2185] = 0x79E4, [2186] = 0x77E7, [2187] = 0x8429, [2188] = 0x4F2F,
-  [2189] = 0x5265, [2190] = 0x535A, [2191] = 0x62CD, [2192] = 0x67CF,
-  [2193] = 0x6CCA, [2194] = 0x767D, [2195] = 0x7B94, [2196] = 0x7C95,
-  [2197] = 0x8236, [2198] = 0x8584, [2199] = 0x8FEB, [2200] = 0x66DD,
-  [2201] = 0x6F20, [2202] = 0x7206, [2203] = 0x7E1B, [2204] = 0x83AB,
-  [2205] = 0x99C1, [2206] = 0x9EA6, [2207] = 0x51FD, [2208] = 0x7BB1,
-  [2209] = 0x7872, [2210] = 0x7BB8, [2211] = 0x8087, [2212] = 0x7B48,
-  [2213] = 0x6AE8, [2214] = 0x5E61, [2215] = 0x808C, [2216] = 0x7551,
-  [2217] = 0x7560, [2218] = 0x516B, [2219] = 0x9262, [2220] = 0x6E8C,
-  [2221] = 0x767A, [2222] = 0x9197, [2223] = 0x9AEA, [2224] = 0x4F10,
-  [2225] = 0x7F70, [2226] = 0x629C, [2227] = 0x7B4F, [2228] = 0x95A5,
-  [2229] = 0x9CE9, [2230] = 0x567A, [2231] = 0x5859, [2232] = 0x86E4,
-  [2233] = 0x96BC, [2234] = 0x4F34, [2235] = 0x5224, [2236] = 0x534A,
-  [2237] = 0x53CD, [2238] = 0x53DB, [2239] = 0x5E06, [2240] = 0x642C,
-  [2241] = 0x6591, [2242] = 0x677F, [2243] = 0x6C3E, [2244] = 0x6C4E,
-  [2245] = 0x7248, [2246] = 0x72AF, [2247] = 0x73ED, [2248] = 0x7554,
-  [2249] = 0x7E41, [2250] = 0x822C, [2251] = 0x85E9, [2252] = 0x8CA9,
-  [2253] = 0x7BC4, [2254] = 0x91C6, [2255] = 0x7169, [2256] = 0x9812,
-  [2257] = 0x98EF, [2258] = 0x633D, [2259] = 0x6669, [2260] = 0x756A,
-  [2261] = 0x76E4, [2262] = 0x78D0, [2263] = 0x8543, [2264] = 0x86EE,
-  [2265] = 0x532A, [2266] = 0x5351, [2267] = 0x5426, [2268] = 0x5983,
-  [2269] = 0x5E87, [2270] = 0x5F7C, [2271] = 0x60B2, [2272] = 0x6249,
-  [2273] = 0x6279, [2274] = 0x62AB, [2275] = 0x6590, [2276] = 0x6BD4,
-  [2277] = 0x6CCC, [2278] = 0x75B2, [2279] = 0x76AE, [2280] = 0x7891,
-  [2281] = 0x79D8, [2282] = 0x7DCB, [2283] = 0x7F77, [2284] = 0x80A5,
-  [2285] = 0x88AB, [2286] = 0x8AB9, [2287] = 0x8CBB, [2288] = 0x907F,
-  [2289] = 0x975E, [2290] = 0x98DB, [2291] = 0x6A0B, [2292] = 0x7C38,
-  [2293] = 0x5099, [2294] = 0x5C3E, [2295] = 0x5FAE, [2296] = 0x6787,
-  [2297] = 0x6BD8, [2298] = 0x7435, [2299] = 0x7709, [2300] = 0x7F8E,
-  [2304] = 0x9F3B, [2305] = 0x67CA, [2306] = 0x7A17, [2307] = 0x5339,
-  [2308] = 0x758B, [2309] = 0x9AED, [2310] = 0x5F66, [2311] = 0x819D,
-  [2312] = 0x83F1, [2313] = 0x8098, [2314] = 0x5F3C, [2315] = 0x5FC5,
-  [2316] = 0x7562, [2317] = 0x7B46, [2318] = 0x903C, [2319] = 0x6867,
-  [2320] = 0x59EB, [2321] = 0x5A9B, [2322] = 0x7D10, [2323] = 0x767E,
-  [2324] = 0x8B2C, [2325] = 0x4FF5, [2326] = 0x5F6A, [2327] = 0x6A19,
-  [2328] = 0x6C37, [2329] = 0x6F02, [2330] = 0x74E2, [2331] = 0x7968,
-  [2332] = 0x8868, [2333] = 0x8A55, [2334] = 0x8C79, [2335] = 0x5EDF,
-  [2336] = 0x63CF, [2337] = 0x75C5, [2338] = 0x79D2, [2339] = 0x82D7,
-  [2340] = 0x9328, [2341] = 0x92F2, [2342] = 0x849C, [2343] = 0x86ED,
-  [2344] = 0x9C2D, [2345] = 0x54C1, [2346] = 0x5F6C, [2347] = 0x658C,
-  [2348] = 0x6D5C, [2349] = 0x7015, [2350] = 0x8CA7, [2351] = 0x8CD3,
-  [2352] = 0x983B, [2353] = 0x654F, [2354] = 0x74F6, [2355] = 0x4E0D,
-  [2356] = 0x4ED8, [2357] = 0x57E0, [2358] = 0x592B, [2359] = 0x5A66,
-  [2360] = 0x5BCC, [2361] = 0x51A8, [2362] = 0x5E03, [2363] = 0x5E9C,
-  [2364] = 0x6016, [2365] = 0x6276, [2366] = 0x6577, [2368] = 0x65A7,
-  [2369] = 0x666E, [2370] = 0x6D6E, [2371] = 0x7236, [2372] = 0x7B26,
-  [2373] = 0x8150, [2374] = 0x819A, [2375] = 0x8299, [2376] = 0x8B5C,
-  [2377] = 0x8CA0, [2378] = 0x8CE6, [2379] = 0x8D74, [2380] = 0x961C,
-  [2381] = 0x9644, [2382] = 0x4FAE, [2383] = 0x64AB, [2384] = 0x6B66,
-  [2385] = 0x821E, [2386] = 0x8461, [2387] = 0x856A, [2388] = 0x90E8,
-  [2389] = 0x5C01, [2390] = 0x6953, [2391] = 0x98A8, [2392] = 0x847A,
-  [2393] = 0x8557, [2394] = 0x4F0F, [2395] = 0x526F, [2396] = 0x5FA9,
-  [2397] = 0x5E45, [2398] = 0x670D, [2399] = 0x798F, [2400] = 0x8179,
-  [2401] = 0x8907, [2402] = 0x8986, [2403] = 0x6DF5, [2404] = 0x5F17,
-  [2405] = 0x6255, [2406] = 0x6CB8, [2407] = 0x4ECF, [2408] = 0x7269,
-  [2409] = 0x9B92, [2410] = 0x5206, [2411] = 0x543B, [2412] = 0x5674,
-  [2413] = 0x58B3, [2414] = 0x61A4, [2415] = 0x626E, [2416] = 0x711A,
-  [2417] = 0x596E, [2418] = 0x7C89, [2419] = 0x7CDE, [2420] = 0x7D1B,
-  [2421] = 0x96F0, [2422] = 0x6587, [2423] = 0x805E, [2424] = 0x4E19,
-  [2425] = 0x4F75, [2426] = 0x5175, [2427] = 0x5840, [2428] = 0x5E63,
-  [2429] = 0x5E73, [2430] = 0x5F0A, [2431] = 0x67C4, [2432] = 0x4E26,
-  [2433] = 0x853D, [2434] = 0x9589, [2435] = 0x965B, [2436] = 0x7C73,
-  [2437] = 0x9801, [2438] = 0x50FB, [2439] = 0x58C1, [2440] = 0x7656,
-  [2441] = 0x78A7, [2442] = 0x5225, [2443] = 0x77A5, [2444] = 0x8511,
-  [2445] = 0x7B86, [2446] = 0x504F, [2447] = 0x5909, [2448] = 0x7247,
-  [2449] = 0x7BC7, [2450] = 0x7DE8, [2451] = 0x8FBA, [2452] = 0x8FD4,
-  [2453] = 0x904D, [2454] = 0x4FBF, [2455] = 0x52C9, [2456] = 0x5A29,
-  [2457] = 0x5F01, [2458] = 0x97AD, [2459] = 0x4FDD, [2460] = 0x8217,
-  [2461] = 0x92EA, [2462] = 0x5703, [2463] = 0x6355, [2464] = 0x6B69,
-  [2465] = 0x752B, [2466] = 0x88DC, [2467] = 0x8F14, [2468] = 0x7A42,
-  [2469] = 0x52DF, [2470] = 0x5893, [2471] = 0x6155, [2472] = 0x620A,
-  [2473] = 0x66AE, [2474] = 0x6BCD, [2475] = 0x7C3F, [2476] = 0x83E9,
-  [2477] = 0x5023, [2478] = 0x4FF8, [2479] = 0x5305, [2480] = 0x5446,
-  [2481] = 0x5831, [2482] = 0x5949, [2483] = 0x5B9D, [2484] = 0x5CF0,
-  [2485] = 0x5CEF, [2486] = 0x5D29, [2487] = 0x5E96, [2488] = 0x62B1,
-  [2489] = 0x6367, [2490] = 0x653E, [2491] = 0x65B9, [2492] = 0x670B,
-  [2496] = 0x6CD5, [2497] = 0x6CE1, [2498] = 0x70F9, [2499] = 0x7832,
-  [2500] = 0x7E2B, [2501] = 0x80DE, [2502] = 0x82B3, [2503] = 0x840C,
-  [2504] = 0x84EC, [2505] = 0x8702, [2506] = 0x8912, [2507] = 0x8A2A,
-  [2508] = 0x8C4A, [2509] = 0x90A6, [2510] = 0x92D2, [2511] = 0x98FD,
-  [2512] = 0x9CF3, [2513] = 0x9D6C, [2514] = 0x4E4F, [2515] = 0x4EA1,
-  [2516] = 0x508D, [2517] = 0x5256, [2518] = 0x574A, [2519] = 0x59A8,
-  [2520] = 0x5E3D, [2521] = 0x5FD8, [2522] = 0x5FD9, [2523] = 0x623F,
-  [2524] = 0x66B4, [2525] = 0x671B, [2526] = 0x67D0, [2527] = 0x68D2,
-  [2528] = 0x5192, [2529] = 0x7D21, [2530] = 0x80AA, [2531] = 0x81A8,
-  [2532] = 0x8B00, [2533] = 0x8C8C, [2534] = 0x8CBF, [2535] = 0x927E,
-  [2536] = 0x9632, [2537] = 0x5420, [2538] = 0x982C, [2539] = 0x5317,
-  [2540] = 0x50D5, [2541] = 0x535C, [2542] = 0x58A8, [2543] = 0x64B2,
-  [2544] = 0x6734, [2545] = 0x7267, [2546] = 0x7766, [2547] = 0x7A46,
-  [2548] = 0x91E6, [2549] = 0x52C3, [2550] = 0x6CA1, [2551] = 0x6B86,
-  [2552] = 0x5800, [2553] = 0x5E4C, [2554] = 0x5954, [2555] = 0x672C,
-  [2556] = 0x7FFB, [2557] = 0x51E1, [2558] = 0x76C6, [2560] = 0x6469,
-  [2561] = 0x78E8, [2562] = 0x9B54, [2563] = 0x9EBB, [2564] = 0x57CB,
-  [2565] = 0x59B9, [2566] = 0x6627, [2567] = 0x679A, [2568] = 0x6BCE,
-  [2569] = 0x54E9, [2570] = 0x69D9, [2571] = 0x5E55, [2572] = 0x819C,
-  [2573] = 0x6795, [2574] = 0x9BAA, [2575] = 0x67FE, [2576] = 0x9C52,
-  [2577] = 0x685D, [2578] = 0x4EA6, [2579] = 0x4FE3, [2580] = 0x53C8,
-  [2581] = 0x62B9, [2582] = 0x672B, [2583] = 0x6CAB, [2584] = 0x8FC4,
-  [2585] = 0x4FAD, [2586] = 0x7E6D, [2587] = 0x9EBF, [2588] = 0x4E07,
-  [2589] = 0x6162, [2590] = 0x6E80, [2591] = 0x6F2B, [2592] = 0x8513,
-  [2593] = 0x5473, [2594] = 0x672A, [2595] = 0x9B45, [2596] = 0x5DF3,
-  [2597] = 0x7B95, [2598] = 0x5CAC, [2599] = 0x5BC6, [2600] = 0x871C,
-  [2601] = 0x6E4A, [2602] = 0x84D1, [2603] = 0x7A14, [2604] = 0x8108,
-  [2605] = 0x5999, [2606] = 0x7C8D, [2607] = 0x6C11, [2608] = 0x7720,
-  [2609] = 0x52D9, [2610] = 0x5922, [2611] = 0x7121, [2612] = 0x725F,
-  [2613] = 0x77DB, [2614] = 0x9727, [2615] = 0x9D61, [2616] = 0x690B,
-  [2617] = 0x5A7F, [2618] = 0x5A18, [2619] = 0x51A5, [2620] = 0x540D,
-  [2621] = 0x547D, [2622] = 0x660E, [2623] = 0x76DF, [2624] = 0x8FF7,
-  [2625] = 0x9298, [2626] = 0x9CF4, [2627] = 0x59EA, [2628] = 0x725D,
-  [2629] = 0x6EC5, [2630] = 0x514D, [2631] = 0x68C9, [2632] = 0x7DBF,
-  [2633] = 0x7DEC, [2634] = 0x9762, [2635] = 0x9EBA, [2636] = 0x6478,
-  [2637] = 0x6A21, [2638] = 0x8302, [2639] = 0x5984, [2640] = 0x5B5F,
-  [2641] = 0x6BDB, [2642] = 0x731B, [2643] = 0x76F2, [2644] = 0x7DB2,
-  [2645] = 0x8017, [2646] = 0x8499, [2647] = 0x5132, [2648] = 0x6728,
-  [2649] = 0x9ED9, [2650] = 0x76EE, [2651] = 0x6762, [2652] = 0x52FF,
-  [2653] = 0x9905, [2654] = 0x5C24, [2655] = 0x623B, [2656] = 0x7C7E,
-  [2657] = 0x8CB0, [2658] = 0x554F, [2659] = 0x60B6, [2660] = 0x7D0B,
-  [2661] = 0x9580, [2662] = 0x5301, [2663] = 0x4E5F, [2664] = 0x51B6,
-  [2665] = 0x591C, [2666] = 0x723A, [2667] = 0x8036, [2668] = 0x91CE,
-  [2669] = 0x5F25, [2670] = 0x77E2, [2671] = 0x5384, [2672] = 0x5F79,
-  [2673] = 0x7D04, [2674] = 0x85AC, [2675] = 0x8A33, [2676] = 0x8E8D,
-  [2677] = 0x9756, [2678] = 0x67F3, [2679] = 0x85AE, [2680] = 0x9453,
-  [2681] = 0x6109, [2682] = 0x6108, [2683] = 0x6CB9, [2684] = 0x7652,
-  [2688] = 0x8AED, [2689] = 0x8F38, [2690] = 0x552F, [2691] = 0x4F51,
-  [2692] = 0x512A, [2693] = 0x52C7, [2694] = 0x53CB, [2695] = 0x5BA5,
-  [2696] = 0x5E7D, [2697] = 0x60A0, [2698] = 0x6182, [2699] = 0x63D6,
-  [2700] = 0x6709, [2701] = 0x67DA, [2702] = 0x6E67, [2703] = 0x6D8C,
-  [2704] = 0x7336, [2705] = 0x7337, [2706] = 0x7531, [2707] = 0x7950,
-  [2708] = 0x88D5, [2709] = 0x8A98, [2710] = 0x904A, [2711] = 0x9091,
-  [2712] = 0x90F5, [2713] = 0x96C4, [2714] = 0x878D, [2715] = 0x5915,
-  [2716] = 0x4E88, [2717] = 0x4F59, [2718] = 0x4E0E, [2719] = 0x8A89,
-  [2720] = 0x8F3F, [2721] = 0x9810, [2722] = 0x50AD, [2723] = 0x5E7C,
-  [2724] = 0x5996, [2725] = 0x5BB9, [2726] = 0x5EB8, [2727] = 0x63DA,
-  [2728] = 0x63FA, [2729] = 0x64C1, [2730] = 0x66DC, [2731] = 0x694A,
-  [2732] = 0x69D8, [2733] = 0x6D0B, [2734] = 0x6EB6, [2735] = 0x7194,
-  [2736] = 0x7528, [2737] = 0x7AAF, [2738] = 0x7F8A, [2739] = 0x8000,
-  [2740] = 0x8449, [2741] = 0x84C9, [2742] = 0x8981, [2743] = 0x8B21,
-  [2744] = 0x8E0A, [2745] = 0x9065, [2746] = 0x967D, [2747] = 0x990A,
-  [2748] = 0x617E, [2749] = 0x6291, [2750] = 0x6B32, [2752] = 0x6C83,
-  [2753] = 0x6D74, [2754] = 0x7FCC, [2755] = 0x7FFC, [2756] = 0x6DC0,
-  [2757] = 0x7F85, [2758] = 0x87BA, [2759] = 0x88F8, [2760] = 0x6765,
-  [2761] = 0x83B1, [2762] = 0x983C, [2763] = 0x96F7, [2764] = 0x6D1B,
-  [2765] = 0x7D61, [2766] = 0x843D, [2767] = 0x916A, [2768] = 0x4E71,
-  [2769] = 0x5375, [2770] = 0x5D50, [2771] = 0x6B04, [2772] = 0x6FEB,
-  [2773] = 0x85CD, [2774] = 0x862D, [2775] = 0x89A7, [2776] = 0x5229,
-  [2777] = 0x540F, [2778] = 0x5C65, [2779] = 0x674E, [2780] = 0x68A8,
-  [2781] = 0x7406, [2782] = 0x7483, [2783] = 0x75E2, [2784] = 0x88CF,
-  [2785] = 0x88E1, [2786] = 0x91CC, [2787] = 0x96E2, [2788] = 0x9678,
-  [2789] = 0x5F8B, [2790] = 0x7387, [2791] = 0x7ACB, [2792] = 0x844E,
-  [2793] = 0x63A0, [2794] = 0x7565, [2795] = 0x5289, [2796] = 0x6D41,
-  [2797] = 0x6E9C, [2798] = 0x7409, [2799] = 0x7559, [2800] = 0x786B,
-  [2801] = 0x7C92, [2802] = 0x9686, [2803] = 0x7ADC, [2804] = 0x9F8D,
-  [2805] = 0x4FB6, [2806] = 0x616E, [2807] = 0x65C5, [2808] = 0x865C,
-  [2809] = 0x4E86, [2810] = 0x4EAE, [2811] = 0x50DA, [2812] = 0x4E21,
-  [2813] = 0x51CC, [2814] = 0x5BEE, [2815] = 0x6599, [2816] = 0x6881,
-  [2817] = 0x6DBC, [2818] = 0x731F, [2819] = 0x7642, [2820] = 0x77AD,
-  [2821] = 0x7A1C, [2822] = 0x7CE7, [2823] = 0x826F, [2824] = 0x8AD2,
-  [2825] = 0x907C, [2826] = 0x91CF, [2827] = 0x9675, [2828] = 0x9818,
-  [2829] = 0x529B, [2830] = 0x7DD1, [2831] = 0x502B, [2832] = 0x5398,
-  [2833] = 0x6797, [2834] = 0x6DCB, [2835] = 0x71D0, [2836] = 0x7433,
-  [2837] = 0x81E8, [2838] = 0x8F2A, [2839] = 0x96A3, [2840] = 0x9C57,
-  [2841] = 0x9E9F, [2842] = 0x7460, [2843] = 0x5841, [2844] = 0x6D99,
-  [2845] = 0x7D2F, [2846] = 0x985E, [2847] = 0x4EE4, [2848] = 0x4F36,
-  [2849] = 0x4F8B, [2850] = 0x51B7, [2851] = 0x52B1, [2852] = 0x5DBA,
-  [2853] = 0x601C, [2854] = 0x73B2, [2855] = 0x793C, [2856] = 0x82D3,
-  [2857] = 0x9234, [2858] = 0x96B7, [2859] = 0x96F6, [2860] = 0x970A,
-  [2861] = 0x9E97, [2862] = 0x9F62, [2863] = 0x66A6, [2864] = 0x6B74,
-  [2865] = 0x5217, [2866] = 0x52A3, [2867] = 0x70C8, [2868] = 0x88C2,
-  [2869] = 0x5EC9, [2870] = 0x604B, [2871] = 0x6190, [2872] = 0x6F23,
-  [2873] = 0x7149, [2874] = 0x7C3E, [2875] = 0x7DF4, [2876] = 0x806F,
-  [2880] = 0x84EE, [2881] = 0x9023, [2882] = 0x932C, [2883] = 0x5442,
-  [2884] = 0x9B6F, [2885] = 0x6AD3, [2886] = 0x7089, [2887] = 0x8CC2,
-  [2888] = 0x8DEF, [2889] = 0x9732, [2890] = 0x52B4, [2891] = 0x5A41,
-  [2892] = 0x5ECA, [2893] = 0x5F04, [2894] = 0x6717, [2895] = 0x697C,
-  [2896] = 0x6994, [2897] = 0x6D6A, [2898] = 0x6F0F, [2899] = 0x7262,
-  [2900] = 0x72FC, [2901] = 0x7BED, [2902] = 0x8001, [2903] = 0x807E,
-  [2904] = 0x874B, [2905] = 0x90CE, [2906] = 0x516D, [2907] = 0x9E93,
-  [2908] = 0x7984, [2909] = 0x808B, [2910] = 0x9332, [2911] = 0x8AD6,
-  [2912] = 0x502D, [2913] = 0x548C, [2914] = 0x8A71, [2915] = 0x6B6A,
-  [2916] = 0x8CC4, [2917] = 0x8107, [2918] = 0x60D1, [2919] = 0x67A0,
-  [2920] = 0x9DF2, [2921] = 0x4E99, [2922] = 0x4E98, [2923] = 0x9C10,
-  [2924] = 0x8A6B, [2925] = 0x85C1, [2926] = 0x8568, [2927] = 0x6900,
-  [2928] = 0x6E7E, [2929] = 0x7897, [2930] = 0x8155, [2975] = 0x5F0C,
-  [2976] = 0x4E10, [2977] = 0x4E15, [2978] = 0x4E2A, [2979] = 0x4E31,
-  [2980] = 0x4E36, [2981] = 0x4E3C, [2982] = 0x4E3F, [2983] = 0x4E42,
-  [2984] = 0x4E56, [2985] = 0x4E58, [2986] = 0x4E82, [2987] = 0x4E85,
-  [2988] = 0x8C6B, [2989] = 0x4E8A, [2990] = 0x8212, [2991] = 0x5F0D,
-  [2992] = 0x4E8E, [2993] = 0x4E9E, [2994] = 0x4E9F, [2995] = 0x4EA0,
-  [2996] = 0x4EA2, [2997] = 0x4EB0, [2998] = 0x4EB3, [2999] = 0x4EB6,
-  [3000] = 0x4ECE, [3001] = 0x4ECD, [3002] = 0x4EC4, [3003] = 0x4EC6,
-  [3004] = 0x4EC2, [3005] = 0x4ED7, [3006] = 0x4EDE, [3007] = 0x4EED,
-  [3008] = 0x4EDF, [3009] = 0x4EF7, [3010] = 0x4F09, [3011] = 0x4F5A,
-  [3012] = 0x4F30, [3013] = 0x4F5B, [3014] = 0x4F5D, [3015] = 0x4F57,
-  [3016] = 0x4F47, [3017] = 0x4F76, [3018] = 0x4F88, [3019] = 0x4F8F,
-  [3020] = 0x4F98, [3021] = 0x4F7B, [3022] = 0x4F69, [3023] = 0x4F70,
-  [3024] = 0x4F91, [3025] = 0x4F6F, [3026] = 0x4F86, [3027] = 0x4F96,
-  [3028] = 0x5118, [3029] = 0x4FD4, [3030] = 0x4FDF, [3031] = 0x4FCE,
-  [3032] = 0x4FD8, [3033] = 0x4FDB, [3034] = 0x4FD1, [3035] = 0x4FDA,
-  [3036] = 0x4FD0, [3037] = 0x4FE4, [3038] = 0x4FE5, [3039] = 0x501A,
-  [3040] = 0x5028, [3041] = 0x5014, [3042] = 0x502A, [3043] = 0x5025,
-  [3044] = 0x5005, [3045] = 0x4F1C, [3046] = 0x4FF6, [3047] = 0x5021,
-  [3048] = 0x5029, [3049] = 0x502C, [3050] = 0x4FFE, [3051] = 0x4FEF,
-  [3052] = 0x5011, [3053] = 0x5006, [3054] = 0x5043, [3055] = 0x5047,
-  [3056] = 0x6703, [3057] = 0x5055, [3058] = 0x5050, [3059] = 0x5048,
-  [3060] = 0x505A, [3061] = 0x5056, [3062] = 0x506C, [3063] = 0x5078,
-  [3064] = 0x5080, [3065] = 0x509A, [3066] = 0x5085, [3067] = 0x50B4,
-  [3068] = 0x50B2, [3072] = 0x50C9, [3073] = 0x50CA, [3074] = 0x50B3,
-  [3075] = 0x50C2, [3076] = 0x50D6, [3077] = 0x50DE, [3078] = 0x50E5,
-  [3079] = 0x50ED, [3080] = 0x50E3, [3081] = 0x50EE, [3082] = 0x50F9,
-  [3083] = 0x50F5, [3084] = 0x5109, [3085] = 0x5101, [3086] = 0x5102,
-  [3087] = 0x5116, [3088] = 0x5115, [3089] = 0x5114, [3090] = 0x511A,
-  [3091] = 0x5121, [3092] = 0x513A, [3093] = 0x5137, [3094] = 0x513C,
-  [3095] = 0x513B, [3096] = 0x513F, [3097] = 0x5140, [3098] = 0x5152,
-  [3099] = 0x514C, [3100] = 0x5154, [3101] = 0x5162, [3102] = 0x7AF8,
-  [3103] = 0x5169, [3104] = 0x516A, [3105] = 0x516E, [3106] = 0x5180,
-  [3107] = 0x5182, [3108] = 0x56D8, [3109] = 0x518C, [3110] = 0x5189,
-  [3111] = 0x518F, [3112] = 0x5191, [3113] = 0x5193, [3114] = 0x5195,
-  [3115] = 0x5196, [3116] = 0x51A4, [3117] = 0x51A6, [3118] = 0x51A2,
-  [3119] = 0x51A9, [3120] = 0x51AA, [3121] = 0x51AB, [3122] = 0x51B3,
-  [3123] = 0x51B1, [3124] = 0x51B2, [3125] = 0x51B0, [3126] = 0x51B5,
-  [3127] = 0x51BD, [3128] = 0x51C5, [3129] = 0x51C9, [3130] = 0x51DB,
-  [3131] = 0x51E0, [3132] = 0x8655, [3133] = 0x51E9, [3134] = 0x51ED,
-  [3136] = 0x51F0, [3137] = 0x51F5, [3138] = 0x51FE, [3139] = 0x5204,
-  [3140] = 0x520B, [3141] = 0x5214, [3142] = 0x520E, [3143] = 0x5227,
-  [3144] = 0x522A, [3145] = 0x522E, [3146] = 0x5233, [3147] = 0x5239,
-  [3148] = 0x524F, [3149] = 0x5244, [3150] = 0x524B, [3151] = 0x524C,
-  [3152] = 0x525E, [3153] = 0x5254, [3154] = 0x526A, [3155] = 0x5274,
-  [3156] = 0x5269, [3157] = 0x5273, [3158] = 0x527F, [3159] = 0x527D,
-  [3160] = 0x528D, [3161] = 0x5294, [3162] = 0x5292, [3163] = 0x5271,
-  [3164] = 0x5288, [3165] = 0x5291, [3166] = 0x8FA8, [3167] = 0x8FA7,
-  [3168] = 0x52AC, [3169] = 0x52AD, [3170] = 0x52BC, [3171] = 0x52B5,
-  [3172] = 0x52C1, [3173] = 0x52CD, [3174] = 0x52D7, [3175] = 0x52DE,
-  [3176] = 0x52E3, [3177] = 0x52E6, [3178] = 0x98ED, [3179] = 0x52E0,
-  [3180] = 0x52F3, [3181] = 0x52F5, [3182] = 0x52F8, [3183] = 0x52F9,
-  [3184] = 0x5306, [3185] = 0x5308, [3186] = 0x7538, [3187] = 0x530D,
-  [3188] = 0x5310, [3189] = 0x530F, [3190] = 0x5315, [3191] = 0x531A,
-  [3192] = 0x5323, [3193] = 0x532F, [3194] = 0x5331, [3195] = 0x5333,
-  [3196] = 0x5338, [3197] = 0x5340, [3198] = 0x5346, [3199] = 0x5345,
-  [3200] = 0x4E17, [3201] = 0x5349, [3202] = 0x534D, [3203] = 0x51D6,
-  [3204] = 0x535E, [3205] = 0x5369, [3206] = 0x536E, [3207] = 0x5918,
-  [3208] = 0x537B, [3209] = 0x5377, [3210] = 0x5382, [3211] = 0x5396,
-  [3212] = 0x53A0, [3213] = 0x53A6, [3214] = 0x53A5, [3215] = 0x53AE,
-  [3216] = 0x53B0, [3217] = 0x53B6, [3218] = 0x53C3, [3219] = 0x7C12,
-  [3220] = 0x96D9, [3221] = 0x53DF, [3222] = 0x66FC, [3223] = 0x71EE,
-  [3224] = 0x53EE, [3225] = 0x53E8, [3226] = 0x53ED, [3227] = 0x53FA,
-  [3228] = 0x5401, [3229] = 0x543D, [3230] = 0x5440, [3231] = 0x542C,
-  [3232] = 0x542D, [3233] = 0x543C, [3234] = 0x542E, [3235] = 0x5436,
-  [3236] = 0x5429, [3237] = 0x541D, [3238] = 0x544E, [3239] = 0x548F,
-  [3240] = 0x5475, [3241] = 0x548E, [3242] = 0x545F, [3243] = 0x5471,
-  [3244] = 0x5477, [3245] = 0x5470, [3246] = 0x5492, [3247] = 0x547B,
-  [3248] = 0x5480, [3249] = 0x5476, [3250] = 0x5484, [3251] = 0x5490,
-  [3252] = 0x5486, [3253] = 0x54C7, [3254] = 0x54A2, [3255] = 0x54B8,
-  [3256] = 0x54A5, [3257] = 0x54AC, [3258] = 0x54C4, [3259] = 0x54C8,
-  [3260] = 0x54A8, [3264] = 0x54AB, [3265] = 0x54C2, [3266] = 0x54A4,
-  [3267] = 0x54BE, [3268] = 0x54BC, [3269] = 0x54D8, [3270] = 0x54E5,
-  [3271] = 0x54E6, [3272] = 0x550F, [3273] = 0x5514, [3274] = 0x54FD,
-  [3275] = 0x54EE, [3276] = 0x54ED, [3277] = 0x54FA, [3278] = 0x54E2,
-  [3279] = 0x5539, [3280] = 0x5540, [3281] = 0x5563, [3282] = 0x554C,
-  [3283] = 0x552E, [3284] = 0x555C, [3285] = 0x5545, [3286] = 0x5556,
-  [3287] = 0x5557, [3288] = 0x5538, [3289] = 0x5533, [3290] = 0x555D,
-  [3291] = 0x5599, [3292] = 0x5580, [3293] = 0x54AF, [3294] = 0x558A,
-  [3295] = 0x559F, [3296] = 0x557B, [3297] = 0x557E, [3298] = 0x5598,
-  [3299] = 0x559E, [3300] = 0x55AE, [3301] = 0x557C, [3302] = 0x5583,
-  [3303] = 0x55A9, [3304] = 0x5587, [3305] = 0x55A8, [3306] = 0x55DA,
-  [3307] = 0x55C5, [3308] = 0x55DF, [3309] = 0x55C4, [3310] = 0x55DC,
-  [3311] = 0x55E4, [3312] = 0x55D4, [3313] = 0x5614, [3314] = 0x55F7,
-  [3315] = 0x5616, [3316] = 0x55FE, [3317] = 0x55FD, [3318] = 0x561B,
-  [3319] = 0x55F9, [3320] = 0x564E, [3321] = 0x5650, [3322] = 0x71DF,
-  [3323] = 0x5634, [3324] = 0x5636, [3325] = 0x5632, [3326] = 0x5638,
-  [3328] = 0x566B, [3329] = 0x5664, [3330] = 0x562F, [3331] = 0x566C,
-  [3332] = 0x566A, [3333] = 0x5686, [3334] = 0x5680, [3335] = 0x568A,
-  [3336] = 0x56A0, [3337] = 0x5694, [3338] = 0x568F, [3339] = 0x56A5,
-  [3340] = 0x56AE, [3341] = 0x56B6, [3342] = 0x56B4, [3343] = 0x56C2,
-  [3344] = 0x56BC, [3345] = 0x56C1, [3346] = 0x56C3, [3347] = 0x56C0,
-  [3348] = 0x56C8, [3349] = 0x56CE, [3350] = 0x56D1, [3351] = 0x56D3,
-  [3352] = 0x56D7, [3353] = 0x56EE, [3354] = 0x56F9, [3355] = 0x5700,
-  [3356] = 0x56FF, [3357] = 0x5704, [3358] = 0x5709, [3359] = 0x5708,
-  [3360] = 0x570B, [3361] = 0x570D, [3362] = 0x5713, [3363] = 0x5718,
-  [3364] = 0x5716, [3365] = 0x55C7, [3366] = 0x571C, [3367] = 0x5726,
-  [3368] = 0x5737, [3369] = 0x5738, [3370] = 0x574E, [3371] = 0x573B,
-  [3372] = 0x5740, [3373] = 0x574F, [3374] = 0x5769, [3375] = 0x57C0,
-  [3376] = 0x5788, [3377] = 0x5761, [3378] = 0x577F, [3379] = 0x5789,
-  [3380] = 0x5793, [3381] = 0x57A0, [3382] = 0x57B3, [3383] = 0x57A4,
-  [3384] = 0x57AA, [3385] = 0x57B0, [3386] = 0x57C3, [3387] = 0x57C6,
-  [3388] = 0x57D4, [3389] = 0x57D2, [3390] = 0x57D3, [3391] = 0x580A,
-  [3392] = 0x57D6, [3393] = 0x57E3, [3394] = 0x580B, [3395] = 0x5819,
-  [3396] = 0x581D, [3397] = 0x5872, [3398] = 0x5821, [3399] = 0x5862,
-  [3400] = 0x584B, [3401] = 0x5870, [3402] = 0x6BC0, [3403] = 0x5852,
-  [3404] = 0x583D, [3405] = 0x5879, [3406] = 0x5885, [3407] = 0x58B9,
-  [3408] = 0x589F, [3409] = 0x58AB, [3410] = 0x58BA, [3411] = 0x58DE,
-  [3412] = 0x58BB, [3413] = 0x58B8, [3414] = 0x58AE, [3415] = 0x58C5,
-  [3416] = 0x58D3, [3417] = 0x58D1, [3418] = 0x58D7, [3419] = 0x58D9,
-  [3420] = 0x58D8, [3421] = 0x58E5, [3422] = 0x58DC, [3423] = 0x58E4,
-  [3424] = 0x58DF, [3425] = 0x58EF, [3426] = 0x58FA, [3427] = 0x58F9,
-  [3428] = 0x58FB, [3429] = 0x58FC, [3430] = 0x58FD, [3431] = 0x5902,
-  [3432] = 0x590A, [3433] = 0x5910, [3434] = 0x591B, [3435] = 0x68A6,
-  [3436] = 0x5925, [3437] = 0x592C, [3438] = 0x592D, [3439] = 0x5932,
-  [3440] = 0x5938, [3441] = 0x593E, [3442] = 0x7AD2, [3443] = 0x5955,
-  [3444] = 0x5950, [3445] = 0x594E, [3446] = 0x595A, [3447] = 0x5958,
-  [3448] = 0x5962, [3449] = 0x5960, [3450] = 0x5967, [3451] = 0x596C,
-  [3452] = 0x5969, [3456] = 0x5978, [3457] = 0x5981, [3458] = 0x599D,
-  [3459] = 0x4F5E, [3460] = 0x4FAB, [3461] = 0x59A3, [3462] = 0x59B2,
-  [3463] = 0x59C6, [3464] = 0x59E8, [3465] = 0x59DC, [3466] = 0x598D,
-  [3467] = 0x59D9, [3468] = 0x59DA, [3469] = 0x5A25, [3470] = 0x5A1F,
-  [3471] = 0x5A11, [3472] = 0x5A1C, [3473] = 0x5A09, [3474] = 0x5A1A,
-  [3475] = 0x5A40, [3476] = 0x5A6C, [3477] = 0x5A49, [3478] = 0x5A35,
-  [3479] = 0x5A36, [3480] = 0x5A62, [3481] = 0x5A6A, [3482] = 0x5A9A,
-  [3483] = 0x5ABC, [3484] = 0x5ABE, [3485] = 0x5ACB, [3486] = 0x5AC2,
-  [3487] = 0x5ABD, [3488] = 0x5AE3, [3489] = 0x5AD7, [3490] = 0x5AE6,
-  [3491] = 0x5AE9, [3492] = 0x5AD6, [3493] = 0x5AFA, [3494] = 0x5AFB,
-  [3495] = 0x5B0C, [3496] = 0x5B0B, [3497] = 0x5B16, [3498] = 0x5B32,
-  [3499] = 0x5AD0, [3500] = 0x5B2A, [3501] = 0x5B36, [3502] = 0x5B3E,
-  [3503] = 0x5B43, [3504] = 0x5B45, [3505] = 0x5B40, [3506] = 0x5B51,
-  [3507] = 0x5B55, [3508] = 0x5B5A, [3509] = 0x5B5B, [3510] = 0x5B65,
-  [3511] = 0x5B69, [3512] = 0x5B70, [3513] = 0x5B73, [3514] = 0x5B75,
-  [3515] = 0x5B78, [3516] = 0x6588, [3517] = 0x5B7A, [3518] = 0x5B80,
-  [3520] = 0x5B83, [3521] = 0x5BA6, [3522] = 0x5BB8, [3523] = 0x5BC3,
-  [3524] = 0x5BC7, [3525] = 0x5BC9, [3526] = 0x5BD4, [3527] = 0x5BD0,
-  [3528] = 0x5BE4, [3529] = 0x5BE6, [3530] = 0x5BE2, [3531] = 0x5BDE,
-  [3532] = 0x5BE5, [3533] = 0x5BEB, [3534] = 0x5BF0, [3535] = 0x5BF6,
-  [3536] = 0x5BF3, [3537] = 0x5C05, [3538] = 0x5C07, [3539] = 0x5C08,
-  [3540] = 0x5C0D, [3541] = 0x5C13, [3542] = 0x5C20, [3543] = 0x5C22,
-  [3544] = 0x5C28, [3545] = 0x5C38, [3546] = 0x5C39, [3547] = 0x5C41,
-  [3548] = 0x5C46, [3549] = 0x5C4E, [3550] = 0x5C53, [3551] = 0x5C50,
-  [3552] = 0x5C4F, [3553] = 0x5B71, [3554] = 0x5C6C, [3555] = 0x5C6E,
-  [3556] = 0x4E62, [3557] = 0x5C76, [3558] = 0x5C79, [3559] = 0x5C8C,
-  [3560] = 0x5C91, [3561] = 0x5C94, [3562] = 0x599B, [3563] = 0x5CAB,
-  [3564] = 0x5CBB, [3565] = 0x5CB6, [3566] = 0x5CBC, [3567] = 0x5CB7,
-  [3568] = 0x5CC5, [3569] = 0x5CBE, [3570] = 0x5CC7, [3571] = 0x5CD9,
-  [3572] = 0x5CE9, [3573] = 0x5CFD, [3574] = 0x5CFA, [3575] = 0x5CED,
-  [3576] = 0x5D8C, [3577] = 0x5CEA, [3578] = 0x5D0B, [3579] = 0x5D15,
-  [3580] = 0x5D17, [3581] = 0x5D5C, [3582] = 0x5D1F, [3583] = 0x5D1B,
-  [3584] = 0x5D11, [3585] = 0x5D14, [3586] = 0x5D22, [3587] = 0x5D1A,
-  [3588] = 0x5D19, [3589] = 0x5D18, [3590] = 0x5D4C, [3591] = 0x5D52,
-  [3592] = 0x5D4E, [3593] = 0x5D4B, [3594] = 0x5D6C, [3595] = 0x5D73,
-  [3596] = 0x5D76, [3597] = 0x5D87, [3598] = 0x5D84, [3599] = 0x5D82,
-  [3600] = 0x5DA2, [3601] = 0x5D9D, [3602] = 0x5DAC, [3603] = 0x5DAE,
-  [3604] = 0x5DBD, [3605] = 0x5D90, [3606] = 0x5DB7, [3607] = 0x5DBC,
-  [3608] = 0x5DC9, [3609] = 0x5DCD, [3610] = 0x5DD3, [3611] = 0x5DD2,
-  [3612] = 0x5DD6, [3613] = 0x5DDB, [3614] = 0x5DEB, [3615] = 0x5DF2,
-  [3616] = 0x5DF5, [3617] = 0x5E0B, [3618] = 0x5E1A, [3619] = 0x5E19,
-  [3620] = 0x5E11, [3621] = 0x5E1B, [3622] = 0x5E36, [3623] = 0x5E37,
-  [3624] = 0x5E44, [3625] = 0x5E43, [3626] = 0x5E40, [3627] = 0x5E4E,
-  [3628] = 0x5E57, [3629] = 0x5E54, [3630] = 0x5E5F, [3631] = 0x5E62,
-  [3632] = 0x5E64, [3633] = 0x5E47, [3634] = 0x5E75, [3635] = 0x5E76,
-  [3636] = 0x5E7A, [3637] = 0x9EBC, [3638] = 0x5E7F, [3639] = 0x5EA0,
-  [3640] = 0x5EC1, [3641] = 0x5EC2, [3642] = 0x5EC8, [3643] = 0x5ED0,
-  [3644] = 0x5ECF, [3648] = 0x5ED6, [3649] = 0x5EE3, [3650] = 0x5EDD,
-  [3651] = 0x5EDA, [3652] = 0x5EDB, [3653] = 0x5EE2, [3654] = 0x5EE1,
-  [3655] = 0x5EE8, [3656] = 0x5EE9, [3657] = 0x5EEC, [3658] = 0x5EF1,
-  [3659] = 0x5EF3, [3660] = 0x5EF0, [3661] = 0x5EF4, [3662] = 0x5EF8,
-  [3663] = 0x5EFE, [3664] = 0x5F03, [3665] = 0x5F09, [3666] = 0x5F5D,
-  [3667] = 0x5F5C, [3668] = 0x5F0B, [3669] = 0x5F11, [3670] = 0x5F16,
-  [3671] = 0x5F29, [3672] = 0x5F2D, [3673] = 0x5F38, [3674] = 0x5F41,
-  [3675] = 0x5F48, [3676] = 0x5F4C, [3677] = 0x5F4E, [3678] = 0x5F2F,
-  [3679] = 0x5F51, [3680] = 0x5F56, [3681] = 0x5F57, [3682] = 0x5F59,
-  [3683] = 0x5F61, [3684] = 0x5F6D, [3685] = 0x5F73, [3686] = 0x5F77,
-  [3687] = 0x5F83, [3688] = 0x5F82, [3689] = 0x5F7F, [3690] = 0x5F8A,
-  [3691] = 0x5F88, [3692] = 0x5F91, [3693] = 0x5F87, [3694] = 0x5F9E,
-  [3695] = 0x5F99, [3696] = 0x5F98, [3697] = 0x5FA0, [3698] = 0x5FA8,
-  [3699] = 0x5FAD, [3700] = 0x5FBC, [3701] = 0x5FD6, [3702] = 0x5FFB,
-  [3703] = 0x5FE4, [3704] = 0x5FF8, [3705] = 0x5FF1, [3706] = 0x5FDD,
-  [3707] = 0x60B3, [3708] = 0x5FFF, [3709] = 0x6021, [3710] = 0x6060,
-  [3712] = 0x6019, [3713] = 0x6010, [3714] = 0x6029, [3715] = 0x600E,
-  [3716] = 0x6031, [3717] = 0x601B, [3718] = 0x6015, [3719] = 0x602B,
-  [3720] = 0x6026, [3721] = 0x600F, [3722] = 0x603A, [3723] = 0x605A,
-  [3724] = 0x6041, [3725] = 0x606A, [3726] = 0x6077, [3727] = 0x605F,
-  [3728] = 0x604A, [3729] = 0x6046, [3730] = 0x604D, [3731] = 0x6063,
-  [3732] = 0x6043, [3733] = 0x6064, [3734] = 0x6042, [3735] = 0x606C,
-  [3736] = 0x606B, [3737] = 0x6059, [3738] = 0x6081, [3739] = 0x608D,
-  [3740] = 0x60E7, [3741] = 0x6083, [3742] = 0x609A, [3743] = 0x6084,
-  [3744] = 0x609B, [3745] = 0x6096, [3746] = 0x6097, [3747] = 0x6092,
-  [3748] = 0x60A7, [3749] = 0x608B, [3750] = 0x60E1, [3751] = 0x60B8,
-  [3752] = 0x60E0, [3753] = 0x60D3, [3754] = 0x60B4, [3755] = 0x5FF0,
-  [3756] = 0x60BD, [3757] = 0x60C6, [3758] = 0x60B5, [3759] = 0x60D8,
-  [3760] = 0x614D, [3761] = 0x6115, [3762] = 0x6106, [3763] = 0x60F6,
-  [3764] = 0x60F7, [3765] = 0x6100, [3766] = 0x60F4, [3767] = 0x60FA,
-  [3768] = 0x6103, [3769] = 0x6121, [3770] = 0x60FB, [3771] = 0x60F1,
-  [3772] = 0x610D, [3773] = 0x610E, [3774] = 0x6147, [3775] = 0x613E,
-  [3776] = 0x6128, [3777] = 0x6127, [3778] = 0x614A, [3779] = 0x613F,
-  [3780] = 0x613C, [3781] = 0x612C, [3782] = 0x6134, [3783] = 0x613D,
-  [3784] = 0x6142, [3785] = 0x6144, [3786] = 0x6173, [3787] = 0x6177,
-  [3788] = 0x6158, [3789] = 0x6159, [3790] = 0x615A, [3791] = 0x616B,
-  [3792] = 0x6174, [3793] = 0x616F, [3794] = 0x6165, [3795] = 0x6171,
-  [3796] = 0x615F, [3797] = 0x615D, [3798] = 0x6153, [3799] = 0x6175,
-  [3800] = 0x6199, [3801] = 0x6196, [3802] = 0x6187, [3803] = 0x61AC,
-  [3804] = 0x6194, [3805] = 0x619A, [3806] = 0x618A, [3807] = 0x6191,
-  [3808] = 0x61AB, [3809] = 0x61AE, [3810] = 0x61CC, [3811] = 0x61CA,
-  [3812] = 0x61C9, [3813] = 0x61F7, [3814] = 0x61C8, [3815] = 0x61C3,
-  [3816] = 0x61C6, [3817] = 0x61BA, [3818] = 0x61CB, [3819] = 0x7F79,
-  [3820] = 0x61CD, [3821] = 0x61E6, [3822] = 0x61E3, [3823] = 0x61F6,
-  [3824] = 0x61FA, [3825] = 0x61F4, [3826] = 0x61FF, [3827] = 0x61FD,
-  [3828] = 0x61FC, [3829] = 0x61FE, [3830] = 0x6200, [3831] = 0x6208,
-  [3832] = 0x6209, [3833] = 0x620D, [3834] = 0x620C, [3835] = 0x6214,
-  [3836] = 0x621B, [3840] = 0x621E, [3841] = 0x6221, [3842] = 0x622A,
-  [3843] = 0x622E, [3844] = 0x6230, [3845] = 0x6232, [3846] = 0x6233,
-  [3847] = 0x6241, [3848] = 0x624E, [3849] = 0x625E, [3850] = 0x6263,
-  [3851] = 0x625B, [3852] = 0x6260, [3853] = 0x6268, [3854] = 0x627C,
-  [3855] = 0x6282, [3856] = 0x6289, [3857] = 0x627E, [3858] = 0x6292,
-  [3859] = 0x6293, [3860] = 0x6296, [3861] = 0x62D4, [3862] = 0x6283,
-  [3863] = 0x6294, [3864] = 0x62D7, [3865] = 0x62D1, [3866] = 0x62BB,
-  [3867] = 0x62CF, [3868] = 0x62FF, [3869] = 0x62C6, [3870] = 0x64D4,
-  [3871] = 0x62C8, [3872] = 0x62DC, [3873] = 0x62CC, [3874] = 0x62CA,
-  [3875] = 0x62C2, [3876] = 0x62C7, [3877] = 0x629B, [3878] = 0x62C9,
-  [3879] = 0x630C, [3880] = 0x62EE, [3881] = 0x62F1, [3882] = 0x6327,
-  [3883] = 0x6302, [3884] = 0x6308, [3885] = 0x62EF, [3886] = 0x62F5,
-  [3887] = 0x6350, [3888] = 0x633E, [3889] = 0x634D, [3890] = 0x641C,
-  [3891] = 0x634F, [3892] = 0x6396, [3893] = 0x638E, [3894] = 0x6380,
-  [3895] = 0x63AB, [3896] = 0x6376, [3897] = 0x63A3, [3898] = 0x638F,
-  [3899] = 0x6389, [3900] = 0x639F, [3901] = 0x63B5, [3902] = 0x636B,
-  [3904] = 0x6369, [3905] = 0x63BE, [3906] = 0x63E9, [3907] = 0x63C0,
-  [3908] = 0x63C6, [3909] = 0x63E3, [3910] = 0x63C9, [3911] = 0x63D2,
-  [3912] = 0x63F6, [3913] = 0x63C4, [3914] = 0x6416, [3915] = 0x6434,
-  [3916] = 0x6406, [3917] = 0x6413, [3918] = 0x6426, [3919] = 0x6436,
-  [3920] = 0x651D, [3921] = 0x6417, [3922] = 0x6428, [3923] = 0x640F,
-  [3924] = 0x6467, [3925] = 0x646F, [3926] = 0x6476, [3927] = 0x644E,
-  [3928] = 0x652A, [3929] = 0x6495, [3930] = 0x6493, [3931] = 0x64A5,
-  [3932] = 0x64A9, [3933] = 0x6488, [3934] = 0x64BC, [3935] = 0x64DA,
-  [3936] = 0x64D2, [3937] = 0x64C5, [3938] = 0x64C7, [3939] = 0x64BB,
-  [3940] = 0x64D8, [3941] = 0x64C2, [3942] = 0x64F1, [3943] = 0x64E7,
-  [3944] = 0x8209, [3945] = 0x64E0, [3946] = 0x64E1, [3947] = 0x62AC,
-  [3948] = 0x64E3, [3949] = 0x64EF, [3950] = 0x652C, [3951] = 0x64F6,
-  [3952] = 0x64F4, [3953] = 0x64F2, [3954] = 0x64FA, [3955] = 0x6500,
-  [3956] = 0x64FD, [3957] = 0x6518, [3958] = 0x651C, [3959] = 0x6505,
-  [3960] = 0x6524, [3961] = 0x6523, [3962] = 0x652B, [3963] = 0x6534,
-  [3964] = 0x6535, [3965] = 0x6537, [3966] = 0x6536, [3967] = 0x6538,
-  [3968] = 0x754B, [3969] = 0x6548, [3970] = 0x6556, [3971] = 0x6555,
-  [3972] = 0x654D, [3973] = 0x6558, [3974] = 0x655E, [3975] = 0x655D,
-  [3976] = 0x6572, [3977] = 0x6578, [3978] = 0x6582, [3979] = 0x6583,
-  [3980] = 0x8B8A, [3981] = 0x659B, [3982] = 0x659F, [3983] = 0x65AB,
-  [3984] = 0x65B7, [3985] = 0x65C3, [3986] = 0x65C6, [3987] = 0x65C1,
-  [3988] = 0x65C4, [3989] = 0x65CC, [3990] = 0x65D2, [3991] = 0x65DB,
-  [3992] = 0x65D9, [3993] = 0x65E0, [3994] = 0x65E1, [3995] = 0x65F1,
-  [3996] = 0x6772, [3997] = 0x660A, [3998] = 0x6603, [3999] = 0x65FB,
-  [4000] = 0x6773, [4001] = 0x6635, [4002] = 0x6636, [4003] = 0x6634,
-  [4004] = 0x661C, [4005] = 0x664F, [4006] = 0x6644, [4007] = 0x6649,
-  [4008] = 0x6641, [4009] = 0x665E, [4010] = 0x665D, [4011] = 0x6664,
-  [4012] = 0x6667, [4013] = 0x6668, [4014] = 0x665F, [4015] = 0x6662,
-  [4016] = 0x6670, [4017] = 0x6683, [4018] = 0x6688, [4019] = 0x668E,
-  [4020] = 0x6689, [4021] = 0x6684, [4022] = 0x6698, [4023] = 0x669D,
-  [4024] = 0x66C1, [4025] = 0x66B9, [4026] = 0x66C9, [4027] = 0x66BE,
-  [4028] = 0x66BC, [4032] = 0x66C4, [4033] = 0x66B8, [4034] = 0x66D6,
-  [4035] = 0x66DA, [4036] = 0x66E0, [4037] = 0x663F, [4038] = 0x66E6,
-  [4039] = 0x66E9, [4040] = 0x66F0, [4041] = 0x66F5, [4042] = 0x66F7,
-  [4043] = 0x670F, [4044] = 0x6716, [4045] = 0x671E, [4046] = 0x6726,
-  [4047] = 0x6727, [4048] = 0x9738, [4049] = 0x672E, [4050] = 0x673F,
-  [4051] = 0x6736, [4052] = 0x6741, [4053] = 0x6738, [4054] = 0x6737,
-  [4055] = 0x6746, [4056] = 0x675E, [4057] = 0x6760, [4058] = 0x6759,
-  [4059] = 0x6763, [4060] = 0x6764, [4061] = 0x6789, [4062] = 0x6770,
-  [4063] = 0x67A9, [4064] = 0x677C, [4065] = 0x676A, [4066] = 0x678C,
-  [4067] = 0x678B, [4068] = 0x67A6, [4069] = 0x67A1, [4070] = 0x6785,
-  [4071] = 0x67B7, [4072] = 0x67EF, [4073] = 0x67B4, [4074] = 0x67EC,
-  [4075] = 0x67B3, [4076] = 0x67E9, [4077] = 0x67B8, [4078] = 0x67E4,
-  [4079] = 0x67DE, [4080] = 0x67DD, [4081] = 0x67E2, [4082] = 0x67EE,
-  [4083] = 0x67B9, [4084] = 0x67CE, [4085] = 0x67C6, [4086] = 0x67E7,
-  [4087] = 0x6A9C, [4088] = 0x681E, [4089] = 0x6846, [4090] = 0x6829,
-  [4091] = 0x6840, [4092] = 0x684D, [4093] = 0x6832, [4094] = 0x684E,
-  [4096] = 0x68B3, [4097] = 0x682B, [4098] = 0x6859, [4099] = 0x6863,
-  [4100] = 0x6877, [4101] = 0x687F, [4102] = 0x689F, [4103] = 0x688F,
-  [4104] = 0x68AD, [4105] = 0x6894, [4106] = 0x689D, [4107] = 0x689B,
-  [4108] = 0x6883, [4109] = 0x6AAE, [4110] = 0x68B9, [4111] = 0x6874,
-  [4112] = 0x68B5, [4113] = 0x68A0, [4114] = 0x68BA, [4115] = 0x690F,
-  [4116] = 0x688D, [4117] = 0x687E, [4118] = 0x6901, [4119] = 0x68CA,
-  [4120] = 0x6908, [4121] = 0x68D8, [4122] = 0x6922, [4123] = 0x6926,
-  [4124] = 0x68E1, [4125] = 0x690C, [4126] = 0x68CD, [4127] = 0x68D4,
-  [4128] = 0x68E7, [4129] = 0x68D5, [4130] = 0x6936, [4131] = 0x6912,
-  [4132] = 0x6904, [4133] = 0x68D7, [4134] = 0x68E3, [4135] = 0x6925,
-  [4136] = 0x68F9, [4137] = 0x68E0, [4138] = 0x68EF, [4139] = 0x6928,
-  [4140] = 0x692A, [4141] = 0x691A, [4142] = 0x6923, [4143] = 0x6921,
-  [4144] = 0x68C6, [4145] = 0x6979, [4146] = 0x6977, [4147] = 0x695C,
-  [4148] = 0x6978, [4149] = 0x696B, [4150] = 0x6954, [4151] = 0x697E,
-  [4152] = 0x696E, [4153] = 0x6939, [4154] = 0x6974, [4155] = 0x693D,
-  [4156] = 0x6959, [4157] = 0x6930, [4158] = 0x6961, [4159] = 0x695E,
-  [4160] = 0x695D, [4161] = 0x6981, [4162] = 0x696A, [4163] = 0x69B2,
-  [4164] = 0x69AE, [4165] = 0x69D0, [4166] = 0x69BF, [4167] = 0x69C1,
-  [4168] = 0x69D3, [4169] = 0x69BE, [4170] = 0x69CE, [4171] = 0x5BE8,
-  [4172] = 0x69CA, [4173] = 0x69DD, [4174] = 0x69BB, [4175] = 0x69C3,
-  [4176] = 0x69A7, [4177] = 0x6A2E, [4178] = 0x6991, [4179] = 0x69A0,
-  [4180] = 0x699C, [4181] = 0x6995, [4182] = 0x69B4, [4183] = 0x69DE,
-  [4184] = 0x69E8, [4185] = 0x6A02, [4186] = 0x6A1B, [4187] = 0x69FF,
-  [4188] = 0x6B0A, [4189] = 0x69F9, [4190] = 0x69F2, [4191] = 0x69E7,
-  [4192] = 0x6A05, [4193] = 0x69B1, [4194] = 0x6A1E, [4195] = 0x69ED,
-  [4196] = 0x6A14, [4197] = 0x69EB, [4198] = 0x6A0A, [4199] = 0x6A12,
-  [4200] = 0x6AC1, [4201] = 0x6A23, [4202] = 0x6A13, [4203] = 0x6A44,
-  [4204] = 0x6A0C, [4205] = 0x6A72, [4206] = 0x6A36, [4207] = 0x6A78,
-  [4208] = 0x6A47, [4209] = 0x6A62, [4210] = 0x6A59, [4211] = 0x6A66,
-  [4212] = 0x6A48, [4213] = 0x6A38, [4214] = 0x6A22, [4215] = 0x6A90,
-  [4216] = 0x6A8D, [4217] = 0x6AA0, [4218] = 0x6A84, [4219] = 0x6AA2,
-  [4220] = 0x6AA3, [4224] = 0x6A97, [4225] = 0x8617, [4226] = 0x6ABB,
-  [4227] = 0x6AC3, [4228] = 0x6AC2, [4229] = 0x6AB8, [4230] = 0x6AB3,
-  [4231] = 0x6AAC, [4232] = 0x6ADE, [4233] = 0x6AD1, [4234] = 0x6ADF,
-  [4235] = 0x6AAA, [4236] = 0x6ADA, [4237] = 0x6AEA, [4238] = 0x6AFB,
-  [4239] = 0x6B05, [4240] = 0x8616, [4241] = 0x6AFA, [4242] = 0x6B12,
-  [4243] = 0x6B16, [4244] = 0x9B31, [4245] = 0x6B1F, [4246] = 0x6B38,
-  [4247] = 0x6B37, [4248] = 0x76DC, [4249] = 0x6B39, [4250] = 0x98EE,
-  [4251] = 0x6B47, [4252] = 0x6B43, [4253] = 0x6B49, [4254] = 0x6B50,
-  [4255] = 0x6B59, [4256] = 0x6B54, [4257] = 0x6B5B, [4258] = 0x6B5F,
-  [4259] = 0x6B61, [4260] = 0x6B78, [4261] = 0x6B79, [4262] = 0x6B7F,
-  [4263] = 0x6B80, [4264] = 0x6B84, [4265] = 0x6B83, [4266] = 0x6B8D,
-  [4267] = 0x6B98, [4268] = 0x6B95, [4269] = 0x6B9E, [4270] = 0x6BA4,
-  [4271] = 0x6BAA, [4272] = 0x6BAB, [4273] = 0x6BAF, [4274] = 0x6BB2,
-  [4275] = 0x6BB1, [4276] = 0x6BB3, [4277] = 0x6BB7, [4278] = 0x6BBC,
-  [4279] = 0x6BC6, [4280] = 0x6BCB, [4281] = 0x6BD3, [4282] = 0x6BDF,
-  [4283] = 0x6BEC, [4284] = 0x6BEB, [4285] = 0x6BF3, [4286] = 0x6BEF,
-  [4288] = 0x9EBE, [4289] = 0x6C08, [4290] = 0x6C13, [4291] = 0x6C14,
-  [4292] = 0x6C1B, [4293] = 0x6C24, [4294] = 0x6C23, [4295] = 0x6C5E,
-  [4296] = 0x6C55, [4297] = 0x6C62, [4298] = 0x6C6A, [4299] = 0x6C82,
-  [4300] = 0x6C8D, [4301] = 0x6C9A, [4302] = 0x6C81, [4303] = 0x6C9B,
-  [4304] = 0x6C7E, [4305] = 0x6C68, [4306] = 0x6C73, [4307] = 0x6C92,
-  [4308] = 0x6C90, [4309] = 0x6CC4, [4310] = 0x6CF1, [4311] = 0x6CD3,
-  [4312] = 0x6CBD, [4313] = 0x6CD7, [4314] = 0x6CC5, [4315] = 0x6CDD,
-  [4316] = 0x6CAE, [4317] = 0x6CB1, [4318] = 0x6CBE, [4319] = 0x6CBA,
-  [4320] = 0x6CDB, [4321] = 0x6CEF, [4322] = 0x6CD9, [4323] = 0x6CEA,
-  [4324] = 0x6D1F, [4325] = 0x884D, [4326] = 0x6D36, [4327] = 0x6D2B,
-  [4328] = 0x6D3D, [4329] = 0x6D38, [4330] = 0x6D19, [4331] = 0x6D35,
-  [4332] = 0x6D33, [4333] = 0x6D12, [4334] = 0x6D0C, [4335] = 0x6D63,
-  [4336] = 0x6D93, [4337] = 0x6D64, [4338] = 0x6D5A, [4339] = 0x6D79,
-  [4340] = 0x6D59, [4341] = 0x6D8E, [4342] = 0x6D95, [4343] = 0x6FE4,
-  [4344] = 0x6D85, [4345] = 0x6DF9, [4346] = 0x6E15, [4347] = 0x6E0A,
-  [4348] = 0x6DB5, [4349] = 0x6DC7, [4350] = 0x6DE6, [4351] = 0x6DB8,
-  [4352] = 0x6DC6, [4353] = 0x6DEC, [4354] = 0x6DDE, [4355] = 0x6DCC,
-  [4356] = 0x6DE8, [4357] = 0x6DD2, [4358] = 0x6DC5, [4359] = 0x6DFA,
-  [4360] = 0x6DD9, [4361] = 0x6DE4, [4362] = 0x6DD5, [4363] = 0x6DEA,
-  [4364] = 0x6DEE, [4365] = 0x6E2D, [4366] = 0x6E6E, [4367] = 0x6E2E,
-  [4368] = 0x6E19, [4369] = 0x6E72, [4370] = 0x6E5F, [4371] = 0x6E3E,
-  [4372] = 0x6E23, [4373] = 0x6E6B, [4374] = 0x6E2B, [4375] = 0x6E76,
-  [4376] = 0x6E4D, [4377] = 0x6E1F, [4378] = 0x6E43, [4379] = 0x6E3A,
-  [4380] = 0x6E4E, [4381] = 0x6E24, [4382] = 0x6EFF, [4383] = 0x6E1D,
-  [4384] = 0x6E38, [4385] = 0x6E82, [4386] = 0x6EAA, [4387] = 0x6E98,
-  [4388] = 0x6EC9, [4389] = 0x6EB7, [4390] = 0x6ED3, [4391] = 0x6EBD,
-  [4392] = 0x6EAF, [4393] = 0x6EC4, [4394] = 0x6EB2, [4395] = 0x6ED4,
-  [4396] = 0x6ED5, [4397] = 0x6E8F, [4398] = 0x6EA5, [4399] = 0x6EC2,
-  [4400] = 0x6E9F, [4401] = 0x6F41, [4402] = 0x6F11, [4403] = 0x704C,
-  [4404] = 0x6EEC, [4405] = 0x6EF8, [4406] = 0x6EFE, [4407] = 0x6F3F,
-  [4408] = 0x6EF2, [4409] = 0x6F31, [4410] = 0x6EEF, [4411] = 0x6F32,
-  [4412] = 0x6ECC
-};
-
-
-/* The following table can be generated from the file
-	unix/mappings/eastasia/jis/shiftjis.txt
-   from the Unicode CD (also available on their FTP server) using
-   the command
-
-	egrep '^0x[eE][[:xdigit:]][[:xdigit:]][[:xdigit:]]' \
-	  /mnt/cdrom/unix/mappings/eastasia/jis/shiftjis.txt | perl ~/sjis.pl
-
-   where sjis.pl contains:
-
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  $n = 0;
-  while (<>) {
-    local($sjis, $ucs, %rest) = split;
-    $sjis = hex($sjis) - 0xe040;
-    local($sidx) = int($sjis / 256) * 192 + ($sjis % 256);
-    printf "\n " if (($n % 4) == 0);
-    ++$n;
-    printf " [%4d] = %s,", $sidx, $ucs;
-  }
-  print "\n";
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-static const uint16_t cjk_block4[2021] =
-{
-  [   0] = 0x6F3E, [   1] = 0x6F13, [   2] = 0x6EF7, [   3] = 0x6F86,
-  [   4] = 0x6F7A, [   5] = 0x6F78, [   6] = 0x6F81, [   7] = 0x6F80,
-  [   8] = 0x6F6F, [   9] = 0x6F5B, [  10] = 0x6FF3, [  11] = 0x6F6D,
-  [  12] = 0x6F82, [  13] = 0x6F7C, [  14] = 0x6F58, [  15] = 0x6F8E,
-  [  16] = 0x6F91, [  17] = 0x6FC2, [  18] = 0x6F66, [  19] = 0x6FB3,
-  [  20] = 0x6FA3, [  21] = 0x6FA1, [  22] = 0x6FA4, [  23] = 0x6FB9,
-  [  24] = 0x6FC6, [  25] = 0x6FAA, [  26] = 0x6FDF, [  27] = 0x6FD5,
-  [  28] = 0x6FEC, [  29] = 0x6FD4, [  30] = 0x6FD8, [  31] = 0x6FF1,
-  [  32] = 0x6FEE, [  33] = 0x6FDB, [  34] = 0x7009, [  35] = 0x700B,
-  [  36] = 0x6FFA, [  37] = 0x7011, [  38] = 0x7001, [  39] = 0x700F,
-  [  40] = 0x6FFE, [  41] = 0x701B, [  42] = 0x701A, [  43] = 0x6F74,
-  [  44] = 0x701D, [  45] = 0x7018, [  46] = 0x701F, [  47] = 0x7030,
-  [  48] = 0x703E, [  49] = 0x7032, [  50] = 0x7051, [  51] = 0x7063,
-  [  52] = 0x7099, [  53] = 0x7092, [  54] = 0x70AF, [  55] = 0x70F1,
-  [  56] = 0x70AC, [  57] = 0x70B8, [  58] = 0x70B3, [  59] = 0x70AE,
-  [  60] = 0x70DF, [  61] = 0x70CB, [  62] = 0x70DD, [  64] = 0x70D9,
-  [  65] = 0x7109, [  66] = 0x70FD, [  67] = 0x711C, [  68] = 0x7119,
-  [  69] = 0x7165, [  70] = 0x7155, [  71] = 0x7188, [  72] = 0x7166,
-  [  73] = 0x7162, [  74] = 0x714C, [  75] = 0x7156, [  76] = 0x716C,
-  [  77] = 0x718F, [  78] = 0x71FB, [  79] = 0x7184, [  80] = 0x7195,
-  [  81] = 0x71A8, [  82] = 0x71AC, [  83] = 0x71D7, [  84] = 0x71B9,
-  [  85] = 0x71BE, [  86] = 0x71D2, [  87] = 0x71C9, [  88] = 0x71D4,
-  [  89] = 0x71CE, [  90] = 0x71E0, [  91] = 0x71EC, [  92] = 0x71E7,
-  [  93] = 0x71F5, [  94] = 0x71FC, [  95] = 0x71F9, [  96] = 0x71FF,
-  [  97] = 0x720D, [  98] = 0x7210, [  99] = 0x721B, [ 100] = 0x7228,
-  [ 101] = 0x722D, [ 102] = 0x722C, [ 103] = 0x7230, [ 104] = 0x7232,
-  [ 105] = 0x723B, [ 106] = 0x723C, [ 107] = 0x723F, [ 108] = 0x7240,
-  [ 109] = 0x7246, [ 110] = 0x724B, [ 111] = 0x7258, [ 112] = 0x7274,
-  [ 113] = 0x727E, [ 114] = 0x7282, [ 115] = 0x7281, [ 116] = 0x7287,
-  [ 117] = 0x7292, [ 118] = 0x7296, [ 119] = 0x72A2, [ 120] = 0x72A7,
-  [ 121] = 0x72B9, [ 122] = 0x72B2, [ 123] = 0x72C3, [ 124] = 0x72C6,
-  [ 125] = 0x72C4, [ 126] = 0x72CE, [ 127] = 0x72D2, [ 128] = 0x72E2,
-  [ 129] = 0x72E0, [ 130] = 0x72E1, [ 131] = 0x72F9, [ 132] = 0x72F7,
-  [ 133] = 0x500F, [ 134] = 0x7317, [ 135] = 0x730A, [ 136] = 0x731C,
-  [ 137] = 0x7316, [ 138] = 0x731D, [ 139] = 0x7334, [ 140] = 0x732F,
-  [ 141] = 0x7329, [ 142] = 0x7325, [ 143] = 0x733E, [ 144] = 0x734E,
-  [ 145] = 0x734F, [ 146] = 0x9ED8, [ 147] = 0x7357, [ 148] = 0x736A,
-  [ 149] = 0x7368, [ 150] = 0x7370, [ 151] = 0x7378, [ 152] = 0x7375,
-  [ 153] = 0x737B, [ 154] = 0x737A, [ 155] = 0x73C8, [ 156] = 0x73B3,
-  [ 157] = 0x73CE, [ 158] = 0x73BB, [ 159] = 0x73C0, [ 160] = 0x73E5,
-  [ 161] = 0x73EE, [ 162] = 0x73DE, [ 163] = 0x74A2, [ 164] = 0x7405,
-  [ 165] = 0x746F, [ 166] = 0x7425, [ 167] = 0x73F8, [ 168] = 0x7432,
-  [ 169] = 0x743A, [ 170] = 0x7455, [ 171] = 0x743F, [ 172] = 0x745F,
-  [ 173] = 0x7459, [ 174] = 0x7441, [ 175] = 0x745C, [ 176] = 0x7469,
-  [ 177] = 0x7470, [ 178] = 0x7463, [ 179] = 0x746A, [ 180] = 0x7476,
-  [ 181] = 0x747E, [ 182] = 0x748B, [ 183] = 0x749E, [ 184] = 0x74A7,
-  [ 185] = 0x74CA, [ 186] = 0x74CF, [ 187] = 0x74D4, [ 188] = 0x73F1,
-  [ 192] = 0x74E0, [ 193] = 0x74E3, [ 194] = 0x74E7, [ 195] = 0x74E9,
-  [ 196] = 0x74EE, [ 197] = 0x74F2, [ 198] = 0x74F0, [ 199] = 0x74F1,
-  [ 200] = 0x74F8, [ 201] = 0x74F7, [ 202] = 0x7504, [ 203] = 0x7503,
-  [ 204] = 0x7505, [ 205] = 0x750C, [ 206] = 0x750E, [ 207] = 0x750D,
-  [ 208] = 0x7515, [ 209] = 0x7513, [ 210] = 0x751E, [ 211] = 0x7526,
-  [ 212] = 0x752C, [ 213] = 0x753C, [ 214] = 0x7544, [ 215] = 0x754D,
-  [ 216] = 0x754A, [ 217] = 0x7549, [ 218] = 0x755B, [ 219] = 0x7546,
-  [ 220] = 0x755A, [ 221] = 0x7569, [ 222] = 0x7564, [ 223] = 0x7567,
-  [ 224] = 0x756B, [ 225] = 0x756D, [ 226] = 0x7578, [ 227] = 0x7576,
-  [ 228] = 0x7586, [ 229] = 0x7587, [ 230] = 0x7574, [ 231] = 0x758A,
-  [ 232] = 0x7589, [ 233] = 0x7582, [ 234] = 0x7594, [ 235] = 0x759A,
-  [ 236] = 0x759D, [ 237] = 0x75A5, [ 238] = 0x75A3, [ 239] = 0x75C2,
-  [ 240] = 0x75B3, [ 241] = 0x75C3, [ 242] = 0x75B5, [ 243] = 0x75BD,
-  [ 244] = 0x75B8, [ 245] = 0x75BC, [ 246] = 0x75B1, [ 247] = 0x75CD,
-  [ 248] = 0x75CA, [ 249] = 0x75D2, [ 250] = 0x75D9, [ 251] = 0x75E3,
-  [ 252] = 0x75DE, [ 253] = 0x75FE, [ 254] = 0x75FF, [ 256] = 0x75FC,
-  [ 257] = 0x7601, [ 258] = 0x75F0, [ 259] = 0x75FA, [ 260] = 0x75F2,
-  [ 261] = 0x75F3, [ 262] = 0x760B, [ 263] = 0x760D, [ 264] = 0x7609,
-  [ 265] = 0x761F, [ 266] = 0x7627, [ 267] = 0x7620, [ 268] = 0x7621,
-  [ 269] = 0x7622, [ 270] = 0x7624, [ 271] = 0x7634, [ 272] = 0x7630,
-  [ 273] = 0x763B, [ 274] = 0x7647, [ 275] = 0x7648, [ 276] = 0x7646,
-  [ 277] = 0x765C, [ 278] = 0x7658, [ 279] = 0x7661, [ 280] = 0x7662,
-  [ 281] = 0x7668, [ 282] = 0x7669, [ 283] = 0x766A, [ 284] = 0x7667,
-  [ 285] = 0x766C, [ 286] = 0x7670, [ 287] = 0x7672, [ 288] = 0x7676,
-  [ 289] = 0x7678, [ 290] = 0x767C, [ 291] = 0x7680, [ 292] = 0x7683,
-  [ 293] = 0x7688, [ 294] = 0x768B, [ 295] = 0x768E, [ 296] = 0x7696,
-  [ 297] = 0x7693, [ 298] = 0x7699, [ 299] = 0x769A, [ 300] = 0x76B0,
-  [ 301] = 0x76B4, [ 302] = 0x76B8, [ 303] = 0x76B9, [ 304] = 0x76BA,
-  [ 305] = 0x76C2, [ 306] = 0x76CD, [ 307] = 0x76D6, [ 308] = 0x76D2,
-  [ 309] = 0x76DE, [ 310] = 0x76E1, [ 311] = 0x76E5, [ 312] = 0x76E7,
-  [ 313] = 0x76EA, [ 314] = 0x862F, [ 315] = 0x76FB, [ 316] = 0x7708,
-  [ 317] = 0x7707, [ 318] = 0x7704, [ 319] = 0x7729, [ 320] = 0x7724,
-  [ 321] = 0x771E, [ 322] = 0x7725, [ 323] = 0x7726, [ 324] = 0x771B,
-  [ 325] = 0x7737, [ 326] = 0x7738, [ 327] = 0x7747, [ 328] = 0x775A,
-  [ 329] = 0x7768, [ 330] = 0x776B, [ 331] = 0x775B, [ 332] = 0x7765,
-  [ 333] = 0x777F, [ 334] = 0x777E, [ 335] = 0x7779, [ 336] = 0x778E,
-  [ 337] = 0x778B, [ 338] = 0x7791, [ 339] = 0x77A0, [ 340] = 0x779E,
-  [ 341] = 0x77B0, [ 342] = 0x77B6, [ 343] = 0x77B9, [ 344] = 0x77BF,
-  [ 345] = 0x77BC, [ 346] = 0x77BD, [ 347] = 0x77BB, [ 348] = 0x77C7,
-  [ 349] = 0x77CD, [ 350] = 0x77D7, [ 351] = 0x77DA, [ 352] = 0x77DC,
-  [ 353] = 0x77E3, [ 354] = 0x77EE, [ 355] = 0x77FC, [ 356] = 0x780C,
-  [ 357] = 0x7812, [ 358] = 0x7926, [ 359] = 0x7820, [ 360] = 0x792A,
-  [ 361] = 0x7845, [ 362] = 0x788E, [ 363] = 0x7874, [ 364] = 0x7886,
-  [ 365] = 0x787C, [ 366] = 0x789A, [ 367] = 0x788C, [ 368] = 0x78A3,
-  [ 369] = 0x78B5, [ 370] = 0x78AA, [ 371] = 0x78AF, [ 372] = 0x78D1,
-  [ 373] = 0x78C6, [ 374] = 0x78CB, [ 375] = 0x78D4, [ 376] = 0x78BE,
-  [ 377] = 0x78BC, [ 378] = 0x78C5, [ 379] = 0x78CA, [ 380] = 0x78EC,
-  [ 384] = 0x78E7, [ 385] = 0x78DA, [ 386] = 0x78FD, [ 387] = 0x78F4,
-  [ 388] = 0x7907, [ 389] = 0x7912, [ 390] = 0x7911, [ 391] = 0x7919,
-  [ 392] = 0x792C, [ 393] = 0x792B, [ 394] = 0x7940, [ 395] = 0x7960,
-  [ 396] = 0x7957, [ 397] = 0x795F, [ 398] = 0x795A, [ 399] = 0x7955,
-  [ 400] = 0x7953, [ 401] = 0x797A, [ 402] = 0x797F, [ 403] = 0x798A,
-  [ 404] = 0x799D, [ 405] = 0x79A7, [ 406] = 0x9F4B, [ 407] = 0x79AA,
-  [ 408] = 0x79AE, [ 409] = 0x79B3, [ 410] = 0x79B9, [ 411] = 0x79BA,
-  [ 412] = 0x79C9, [ 413] = 0x79D5, [ 414] = 0x79E7, [ 415] = 0x79EC,
-  [ 416] = 0x79E1, [ 417] = 0x79E3, [ 418] = 0x7A08, [ 419] = 0x7A0D,
-  [ 420] = 0x7A18, [ 421] = 0x7A19, [ 422] = 0x7A20, [ 423] = 0x7A1F,
-  [ 424] = 0x7980, [ 425] = 0x7A31, [ 426] = 0x7A3B, [ 427] = 0x7A3E,
-  [ 428] = 0x7A37, [ 429] = 0x7A43, [ 430] = 0x7A57, [ 431] = 0x7A49,
-  [ 432] = 0x7A61, [ 433] = 0x7A62, [ 434] = 0x7A69, [ 435] = 0x9F9D,
-  [ 436] = 0x7A70, [ 437] = 0x7A79, [ 438] = 0x7A7D, [ 439] = 0x7A88,
-  [ 440] = 0x7A97, [ 441] = 0x7A95, [ 442] = 0x7A98, [ 443] = 0x7A96,
-  [ 444] = 0x7AA9, [ 445] = 0x7AC8, [ 446] = 0x7AB0, [ 448] = 0x7AB6,
-  [ 449] = 0x7AC5, [ 450] = 0x7AC4, [ 451] = 0x7ABF, [ 452] = 0x9083,
-  [ 453] = 0x7AC7, [ 454] = 0x7ACA, [ 455] = 0x7ACD, [ 456] = 0x7ACF,
-  [ 457] = 0x7AD5, [ 458] = 0x7AD3, [ 459] = 0x7AD9, [ 460] = 0x7ADA,
-  [ 461] = 0x7ADD, [ 462] = 0x7AE1, [ 463] = 0x7AE2, [ 464] = 0x7AE6,
-  [ 465] = 0x7AED, [ 466] = 0x7AF0, [ 467] = 0x7B02, [ 468] = 0x7B0F,
-  [ 469] = 0x7B0A, [ 470] = 0x7B06, [ 471] = 0x7B33, [ 472] = 0x7B18,
-  [ 473] = 0x7B19, [ 474] = 0x7B1E, [ 475] = 0x7B35, [ 476] = 0x7B28,
-  [ 477] = 0x7B36, [ 478] = 0x7B50, [ 479] = 0x7B7A, [ 480] = 0x7B04,
-  [ 481] = 0x7B4D, [ 482] = 0x7B0B, [ 483] = 0x7B4C, [ 484] = 0x7B45,
-  [ 485] = 0x7B75, [ 486] = 0x7B65, [ 487] = 0x7B74, [ 488] = 0x7B67,
-  [ 489] = 0x7B70, [ 490] = 0x7B71, [ 491] = 0x7B6C, [ 492] = 0x7B6E,
-  [ 493] = 0x7B9D, [ 494] = 0x7B98, [ 495] = 0x7B9F, [ 496] = 0x7B8D,
-  [ 497] = 0x7B9C, [ 498] = 0x7B9A, [ 499] = 0x7B8B, [ 500] = 0x7B92,
-  [ 501] = 0x7B8F, [ 502] = 0x7B5D, [ 503] = 0x7B99, [ 504] = 0x7BCB,
-  [ 505] = 0x7BC1, [ 506] = 0x7BCC, [ 507] = 0x7BCF, [ 508] = 0x7BB4,
-  [ 509] = 0x7BC6, [ 510] = 0x7BDD, [ 511] = 0x7BE9, [ 512] = 0x7C11,
-  [ 513] = 0x7C14, [ 514] = 0x7BE6, [ 515] = 0x7BE5, [ 516] = 0x7C60,
-  [ 517] = 0x7C00, [ 518] = 0x7C07, [ 519] = 0x7C13, [ 520] = 0x7BF3,
-  [ 521] = 0x7BF7, [ 522] = 0x7C17, [ 523] = 0x7C0D, [ 524] = 0x7BF6,
-  [ 525] = 0x7C23, [ 526] = 0x7C27, [ 527] = 0x7C2A, [ 528] = 0x7C1F,
-  [ 529] = 0x7C37, [ 530] = 0x7C2B, [ 531] = 0x7C3D, [ 532] = 0x7C4C,
-  [ 533] = 0x7C43, [ 534] = 0x7C54, [ 535] = 0x7C4F, [ 536] = 0x7C40,
-  [ 537] = 0x7C50, [ 538] = 0x7C58, [ 539] = 0x7C5F, [ 540] = 0x7C64,
-  [ 541] = 0x7C56, [ 542] = 0x7C65, [ 543] = 0x7C6C, [ 544] = 0x7C75,
-  [ 545] = 0x7C83, [ 546] = 0x7C90, [ 547] = 0x7CA4, [ 548] = 0x7CAD,
-  [ 549] = 0x7CA2, [ 550] = 0x7CAB, [ 551] = 0x7CA1, [ 552] = 0x7CA8,
-  [ 553] = 0x7CB3, [ 554] = 0x7CB2, [ 555] = 0x7CB1, [ 556] = 0x7CAE,
-  [ 557] = 0x7CB9, [ 558] = 0x7CBD, [ 559] = 0x7CC0, [ 560] = 0x7CC5,
-  [ 561] = 0x7CC2, [ 562] = 0x7CD8, [ 563] = 0x7CD2, [ 564] = 0x7CDC,
-  [ 565] = 0x7CE2, [ 566] = 0x9B3B, [ 567] = 0x7CEF, [ 568] = 0x7CF2,
-  [ 569] = 0x7CF4, [ 570] = 0x7CF6, [ 571] = 0x7CFA, [ 572] = 0x7D06,
-  [ 576] = 0x7D02, [ 577] = 0x7D1C, [ 578] = 0x7D15, [ 579] = 0x7D0A,
-  [ 580] = 0x7D45, [ 581] = 0x7D4B, [ 582] = 0x7D2E, [ 583] = 0x7D32,
-  [ 584] = 0x7D3F, [ 585] = 0x7D35, [ 586] = 0x7D46, [ 587] = 0x7D73,
-  [ 588] = 0x7D56, [ 589] = 0x7D4E, [ 590] = 0x7D72, [ 591] = 0x7D68,
-  [ 592] = 0x7D6E, [ 593] = 0x7D4F, [ 594] = 0x7D63, [ 595] = 0x7D93,
-  [ 596] = 0x7D89, [ 597] = 0x7D5B, [ 598] = 0x7D8F, [ 599] = 0x7D7D,
-  [ 600] = 0x7D9B, [ 601] = 0x7DBA, [ 602] = 0x7DAE, [ 603] = 0x7DA3,
-  [ 604] = 0x7DB5, [ 605] = 0x7DC7, [ 606] = 0x7DBD, [ 607] = 0x7DAB,
-  [ 608] = 0x7E3D, [ 609] = 0x7DA2, [ 610] = 0x7DAF, [ 611] = 0x7DDC,
-  [ 612] = 0x7DB8, [ 613] = 0x7D9F, [ 614] = 0x7DB0, [ 615] = 0x7DD8,
-  [ 616] = 0x7DDD, [ 617] = 0x7DE4, [ 618] = 0x7DDE, [ 619] = 0x7DFB,
-  [ 620] = 0x7DF2, [ 621] = 0x7DE1, [ 622] = 0x7E05, [ 623] = 0x7E0A,
-  [ 624] = 0x7E23, [ 625] = 0x7E21, [ 626] = 0x7E12, [ 627] = 0x7E31,
-  [ 628] = 0x7E1F, [ 629] = 0x7E09, [ 630] = 0x7E0B, [ 631] = 0x7E22,
-  [ 632] = 0x7E46, [ 633] = 0x7E66, [ 634] = 0x7E3B, [ 635] = 0x7E35,
-  [ 636] = 0x7E39, [ 637] = 0x7E43, [ 638] = 0x7E37, [ 640] = 0x7E32,
-  [ 641] = 0x7E3A, [ 642] = 0x7E67, [ 643] = 0x7E5D, [ 644] = 0x7E56,
-  [ 645] = 0x7E5E, [ 646] = 0x7E59, [ 647] = 0x7E5A, [ 648] = 0x7E79,
-  [ 649] = 0x7E6A, [ 650] = 0x7E69, [ 651] = 0x7E7C, [ 652] = 0x7E7B,
-  [ 653] = 0x7E83, [ 654] = 0x7DD5, [ 655] = 0x7E7D, [ 656] = 0x8FAE,
-  [ 657] = 0x7E7F, [ 658] = 0x7E88, [ 659] = 0x7E89, [ 660] = 0x7E8C,
-  [ 661] = 0x7E92, [ 662] = 0x7E90, [ 663] = 0x7E93, [ 664] = 0x7E94,
-  [ 665] = 0x7E96, [ 666] = 0x7E8E, [ 667] = 0x7E9B, [ 668] = 0x7E9C,
-  [ 669] = 0x7F38, [ 670] = 0x7F3A, [ 671] = 0x7F45, [ 672] = 0x7F4C,
-  [ 673] = 0x7F4D, [ 674] = 0x7F4E, [ 675] = 0x7F50, [ 676] = 0x7F51,
-  [ 677] = 0x7F55, [ 678] = 0x7F54, [ 679] = 0x7F58, [ 680] = 0x7F5F,
-  [ 681] = 0x7F60, [ 682] = 0x7F68, [ 683] = 0x7F69, [ 684] = 0x7F67,
-  [ 685] = 0x7F78, [ 686] = 0x7F82, [ 687] = 0x7F86, [ 688] = 0x7F83,
-  [ 689] = 0x7F88, [ 690] = 0x7F87, [ 691] = 0x7F8C, [ 692] = 0x7F94,
-  [ 693] = 0x7F9E, [ 694] = 0x7F9D, [ 695] = 0x7F9A, [ 696] = 0x7FA3,
-  [ 697] = 0x7FAF, [ 698] = 0x7FB2, [ 699] = 0x7FB9, [ 700] = 0x7FAE,
-  [ 701] = 0x7FB6, [ 702] = 0x7FB8, [ 703] = 0x8B71, [ 704] = 0x7FC5,
-  [ 705] = 0x7FC6, [ 706] = 0x7FCA, [ 707] = 0x7FD5, [ 708] = 0x7FD4,
-  [ 709] = 0x7FE1, [ 710] = 0x7FE6, [ 711] = 0x7FE9, [ 712] = 0x7FF3,
-  [ 713] = 0x7FF9, [ 714] = 0x98DC, [ 715] = 0x8006, [ 716] = 0x8004,
-  [ 717] = 0x800B, [ 718] = 0x8012, [ 719] = 0x8018, [ 720] = 0x8019,
-  [ 721] = 0x801C, [ 722] = 0x8021, [ 723] = 0x8028, [ 724] = 0x803F,
-  [ 725] = 0x803B, [ 726] = 0x804A, [ 727] = 0x8046, [ 728] = 0x8052,
-  [ 729] = 0x8058, [ 730] = 0x805A, [ 731] = 0x805F, [ 732] = 0x8062,
-  [ 733] = 0x8068, [ 734] = 0x8073, [ 735] = 0x8072, [ 736] = 0x8070,
-  [ 737] = 0x8076, [ 738] = 0x8079, [ 739] = 0x807D, [ 740] = 0x807F,
-  [ 741] = 0x8084, [ 742] = 0x8086, [ 743] = 0x8085, [ 744] = 0x809B,
-  [ 745] = 0x8093, [ 746] = 0x809A, [ 747] = 0x80AD, [ 748] = 0x5190,
-  [ 749] = 0x80AC, [ 750] = 0x80DB, [ 751] = 0x80E5, [ 752] = 0x80D9,
-  [ 753] = 0x80DD, [ 754] = 0x80C4, [ 755] = 0x80DA, [ 756] = 0x80D6,
-  [ 757] = 0x8109, [ 758] = 0x80EF, [ 759] = 0x80F1, [ 760] = 0x811B,
-  [ 761] = 0x8129, [ 762] = 0x8123, [ 763] = 0x812F, [ 764] = 0x814B,
-  [ 768] = 0x968B, [ 769] = 0x8146, [ 770] = 0x813E, [ 771] = 0x8153,
-  [ 772] = 0x8151, [ 773] = 0x80FC, [ 774] = 0x8171, [ 775] = 0x816E,
-  [ 776] = 0x8165, [ 777] = 0x8166, [ 778] = 0x8174, [ 779] = 0x8183,
-  [ 780] = 0x8188, [ 781] = 0x818A, [ 782] = 0x8180, [ 783] = 0x8182,
-  [ 784] = 0x81A0, [ 785] = 0x8195, [ 786] = 0x81A4, [ 787] = 0x81A3,
-  [ 788] = 0x815F, [ 789] = 0x8193, [ 790] = 0x81A9, [ 791] = 0x81B0,
-  [ 792] = 0x81B5, [ 793] = 0x81BE, [ 794] = 0x81B8, [ 795] = 0x81BD,
-  [ 796] = 0x81C0, [ 797] = 0x81C2, [ 798] = 0x81BA, [ 799] = 0x81C9,
-  [ 800] = 0x81CD, [ 801] = 0x81D1, [ 802] = 0x81D9, [ 803] = 0x81D8,
-  [ 804] = 0x81C8, [ 805] = 0x81DA, [ 806] = 0x81DF, [ 807] = 0x81E0,
-  [ 808] = 0x81E7, [ 809] = 0x81FA, [ 810] = 0x81FB, [ 811] = 0x81FE,
-  [ 812] = 0x8201, [ 813] = 0x8202, [ 814] = 0x8205, [ 815] = 0x8207,
-  [ 816] = 0x820A, [ 817] = 0x820D, [ 818] = 0x8210, [ 819] = 0x8216,
-  [ 820] = 0x8229, [ 821] = 0x822B, [ 822] = 0x8238, [ 823] = 0x8233,
-  [ 824] = 0x8240, [ 825] = 0x8259, [ 826] = 0x8258, [ 827] = 0x825D,
-  [ 828] = 0x825A, [ 829] = 0x825F, [ 830] = 0x8264, [ 832] = 0x8262,
-  [ 833] = 0x8268, [ 834] = 0x826A, [ 835] = 0x826B, [ 836] = 0x822E,
-  [ 837] = 0x8271, [ 838] = 0x8277, [ 839] = 0x8278, [ 840] = 0x827E,
-  [ 841] = 0x828D, [ 842] = 0x8292, [ 843] = 0x82AB, [ 844] = 0x829F,
-  [ 845] = 0x82BB, [ 846] = 0x82AC, [ 847] = 0x82E1, [ 848] = 0x82E3,
-  [ 849] = 0x82DF, [ 850] = 0x82D2, [ 851] = 0x82F4, [ 852] = 0x82F3,
-  [ 853] = 0x82FA, [ 854] = 0x8393, [ 855] = 0x8303, [ 856] = 0x82FB,
-  [ 857] = 0x82F9, [ 858] = 0x82DE, [ 859] = 0x8306, [ 860] = 0x82DC,
-  [ 861] = 0x8309, [ 862] = 0x82D9, [ 863] = 0x8335, [ 864] = 0x8334,
-  [ 865] = 0x8316, [ 866] = 0x8332, [ 867] = 0x8331, [ 868] = 0x8340,
-  [ 869] = 0x8339, [ 870] = 0x8350, [ 871] = 0x8345, [ 872] = 0x832F,
-  [ 873] = 0x832B, [ 874] = 0x8317, [ 875] = 0x8318, [ 876] = 0x8385,
-  [ 877] = 0x839A, [ 878] = 0x83AA, [ 879] = 0x839F, [ 880] = 0x83A2,
-  [ 881] = 0x8396, [ 882] = 0x8323, [ 883] = 0x838E, [ 884] = 0x8387,
-  [ 885] = 0x838A, [ 886] = 0x837C, [ 887] = 0x83B5, [ 888] = 0x8373,
-  [ 889] = 0x8375, [ 890] = 0x83A0, [ 891] = 0x8389, [ 892] = 0x83A8,
-  [ 893] = 0x83F4, [ 894] = 0x8413, [ 895] = 0x83EB, [ 896] = 0x83CE,
-  [ 897] = 0x83FD, [ 898] = 0x8403, [ 899] = 0x83D8, [ 900] = 0x840B,
-  [ 901] = 0x83C1, [ 902] = 0x83F7, [ 903] = 0x8407, [ 904] = 0x83E0,
-  [ 905] = 0x83F2, [ 906] = 0x840D, [ 907] = 0x8422, [ 908] = 0x8420,
-  [ 909] = 0x83BD, [ 910] = 0x8438, [ 911] = 0x8506, [ 912] = 0x83FB,
-  [ 913] = 0x846D, [ 914] = 0x842A, [ 915] = 0x843C, [ 916] = 0x855A,
-  [ 917] = 0x8484, [ 918] = 0x8477, [ 919] = 0x846B, [ 920] = 0x84AD,
-  [ 921] = 0x846E, [ 922] = 0x8482, [ 923] = 0x8469, [ 924] = 0x8446,
-  [ 925] = 0x842C, [ 926] = 0x846F, [ 927] = 0x8479, [ 928] = 0x8435,
-  [ 929] = 0x84CA, [ 930] = 0x8462, [ 931] = 0x84B9, [ 932] = 0x84BF,
-  [ 933] = 0x849F, [ 934] = 0x84D9, [ 935] = 0x84CD, [ 936] = 0x84BB,
-  [ 937] = 0x84DA, [ 938] = 0x84D0, [ 939] = 0x84C1, [ 940] = 0x84C6,
-  [ 941] = 0x84D6, [ 942] = 0x84A1, [ 943] = 0x8521, [ 944] = 0x84FF,
-  [ 945] = 0x84F4, [ 946] = 0x8517, [ 947] = 0x8518, [ 948] = 0x852C,
-  [ 949] = 0x851F, [ 950] = 0x8515, [ 951] = 0x8514, [ 952] = 0x84FC,
-  [ 953] = 0x8540, [ 954] = 0x8563, [ 955] = 0x8558, [ 956] = 0x8548,
-  [ 960] = 0x8541, [ 961] = 0x8602, [ 962] = 0x854B, [ 963] = 0x8555,
-  [ 964] = 0x8580, [ 965] = 0x85A4, [ 966] = 0x8588, [ 967] = 0x8591,
-  [ 968] = 0x858A, [ 969] = 0x85A8, [ 970] = 0x856D, [ 971] = 0x8594,
-  [ 972] = 0x859B, [ 973] = 0x85EA, [ 974] = 0x8587, [ 975] = 0x859C,
-  [ 976] = 0x8577, [ 977] = 0x857E, [ 978] = 0x8590, [ 979] = 0x85C9,
-  [ 980] = 0x85BA, [ 981] = 0x85CF, [ 982] = 0x85B9, [ 983] = 0x85D0,
-  [ 984] = 0x85D5, [ 985] = 0x85DD, [ 986] = 0x85E5, [ 987] = 0x85DC,
-  [ 988] = 0x85F9, [ 989] = 0x860A, [ 990] = 0x8613, [ 991] = 0x860B,
-  [ 992] = 0x85FE, [ 993] = 0x85FA, [ 994] = 0x8606, [ 995] = 0x8622,
-  [ 996] = 0x861A, [ 997] = 0x8630, [ 998] = 0x863F, [ 999] = 0x864D,
-  [1000] = 0x4E55, [1001] = 0x8654, [1002] = 0x865F, [1003] = 0x8667,
-  [1004] = 0x8671, [1005] = 0x8693, [1006] = 0x86A3, [1007] = 0x86A9,
-  [1008] = 0x86AA, [1009] = 0x868B, [1010] = 0x868C, [1011] = 0x86B6,
-  [1012] = 0x86AF, [1013] = 0x86C4, [1014] = 0x86C6, [1015] = 0x86B0,
-  [1016] = 0x86C9, [1017] = 0x8823, [1018] = 0x86AB, [1019] = 0x86D4,
-  [1020] = 0x86DE, [1021] = 0x86E9, [1022] = 0x86EC, [1024] = 0x86DF,
-  [1025] = 0x86DB, [1026] = 0x86EF, [1027] = 0x8712, [1028] = 0x8706,
-  [1029] = 0x8708, [1030] = 0x8700, [1031] = 0x8703, [1032] = 0x86FB,
-  [1033] = 0x8711, [1034] = 0x8709, [1035] = 0x870D, [1036] = 0x86F9,
-  [1037] = 0x870A, [1038] = 0x8734, [1039] = 0x873F, [1040] = 0x8737,
-  [1041] = 0x873B, [1042] = 0x8725, [1043] = 0x8729, [1044] = 0x871A,
-  [1045] = 0x8760, [1046] = 0x875F, [1047] = 0x8778, [1048] = 0x874C,
-  [1049] = 0x874E, [1050] = 0x8774, [1051] = 0x8757, [1052] = 0x8768,
-  [1053] = 0x876E, [1054] = 0x8759, [1055] = 0x8753, [1056] = 0x8763,
-  [1057] = 0x876A, [1058] = 0x8805, [1059] = 0x87A2, [1060] = 0x879F,
-  [1061] = 0x8782, [1062] = 0x87AF, [1063] = 0x87CB, [1064] = 0x87BD,
-  [1065] = 0x87C0, [1066] = 0x87D0, [1067] = 0x96D6, [1068] = 0x87AB,
-  [1069] = 0x87C4, [1070] = 0x87B3, [1071] = 0x87C7, [1072] = 0x87C6,
-  [1073] = 0x87BB, [1074] = 0x87EF, [1075] = 0x87F2, [1076] = 0x87E0,
-  [1077] = 0x880F, [1078] = 0x880D, [1079] = 0x87FE, [1080] = 0x87F6,
-  [1081] = 0x87F7, [1082] = 0x880E, [1083] = 0x87D2, [1084] = 0x8811,
-  [1085] = 0x8816, [1086] = 0x8815, [1087] = 0x8822, [1088] = 0x8821,
-  [1089] = 0x8831, [1090] = 0x8836, [1091] = 0x8839, [1092] = 0x8827,
-  [1093] = 0x883B, [1094] = 0x8844, [1095] = 0x8842, [1096] = 0x8852,
-  [1097] = 0x8859, [1098] = 0x885E, [1099] = 0x8862, [1100] = 0x886B,
-  [1101] = 0x8881, [1102] = 0x887E, [1103] = 0x889E, [1104] = 0x8875,
-  [1105] = 0x887D, [1106] = 0x88B5, [1107] = 0x8872, [1108] = 0x8882,
-  [1109] = 0x8897, [1110] = 0x8892, [1111] = 0x88AE, [1112] = 0x8899,
-  [1113] = 0x88A2, [1114] = 0x888D, [1115] = 0x88A4, [1116] = 0x88B0,
-  [1117] = 0x88BF, [1118] = 0x88B1, [1119] = 0x88C3, [1120] = 0x88C4,
-  [1121] = 0x88D4, [1122] = 0x88D8, [1123] = 0x88D9, [1124] = 0x88DD,
-  [1125] = 0x88F9, [1126] = 0x8902, [1127] = 0x88FC, [1128] = 0x88F4,
-  [1129] = 0x88E8, [1130] = 0x88F2, [1131] = 0x8904, [1132] = 0x890C,
-  [1133] = 0x890A, [1134] = 0x8913, [1135] = 0x8943, [1136] = 0x891E,
-  [1137] = 0x8925, [1138] = 0x892A, [1139] = 0x892B, [1140] = 0x8941,
-  [1141] = 0x8944, [1142] = 0x893B, [1143] = 0x8936, [1144] = 0x8938,
-  [1145] = 0x894C, [1146] = 0x891D, [1147] = 0x8960, [1148] = 0x895E,
-  [1152] = 0x8966, [1153] = 0x8964, [1154] = 0x896D, [1155] = 0x896A,
-  [1156] = 0x896F, [1157] = 0x8974, [1158] = 0x8977, [1159] = 0x897E,
-  [1160] = 0x8983, [1161] = 0x8988, [1162] = 0x898A, [1163] = 0x8993,
-  [1164] = 0x8998, [1165] = 0x89A1, [1166] = 0x89A9, [1167] = 0x89A6,
-  [1168] = 0x89AC, [1169] = 0x89AF, [1170] = 0x89B2, [1171] = 0x89BA,
-  [1172] = 0x89BD, [1173] = 0x89BF, [1174] = 0x89C0, [1175] = 0x89DA,
-  [1176] = 0x89DC, [1177] = 0x89DD, [1178] = 0x89E7, [1179] = 0x89F4,
-  [1180] = 0x89F8, [1181] = 0x8A03, [1182] = 0x8A16, [1183] = 0x8A10,
-  [1184] = 0x8A0C, [1185] = 0x8A1B, [1186] = 0x8A1D, [1187] = 0x8A25,
-  [1188] = 0x8A36, [1189] = 0x8A41, [1190] = 0x8A5B, [1191] = 0x8A52,
-  [1192] = 0x8A46, [1193] = 0x8A48, [1194] = 0x8A7C, [1195] = 0x8A6D,
-  [1196] = 0x8A6C, [1197] = 0x8A62, [1198] = 0x8A85, [1199] = 0x8A82,
-  [1200] = 0x8A84, [1201] = 0x8AA8, [1202] = 0x8AA1, [1203] = 0x8A91,
-  [1204] = 0x8AA5, [1205] = 0x8AA6, [1206] = 0x8A9A, [1207] = 0x8AA3,
-  [1208] = 0x8AC4, [1209] = 0x8ACD, [1210] = 0x8AC2, [1211] = 0x8ADA,
-  [1212] = 0x8AEB, [1213] = 0x8AF3, [1214] = 0x8AE7, [1216] = 0x8AE4,
-  [1217] = 0x8AF1, [1218] = 0x8B14, [1219] = 0x8AE0, [1220] = 0x8AE2,
-  [1221] = 0x8AF7, [1222] = 0x8ADE, [1223] = 0x8ADB, [1224] = 0x8B0C,
-  [1225] = 0x8B07, [1226] = 0x8B1A, [1227] = 0x8AE1, [1228] = 0x8B16,
-  [1229] = 0x8B10, [1230] = 0x8B17, [1231] = 0x8B20, [1232] = 0x8B33,
-  [1233] = 0x97AB, [1234] = 0x8B26, [1235] = 0x8B2B, [1236] = 0x8B3E,
-  [1237] = 0x8B28, [1238] = 0x8B41, [1239] = 0x8B4C, [1240] = 0x8B4F,
-  [1241] = 0x8B4E, [1242] = 0x8B49, [1243] = 0x8B56, [1244] = 0x8B5B,
-  [1245] = 0x8B5A, [1246] = 0x8B6B, [1247] = 0x8B5F, [1248] = 0x8B6C,
-  [1249] = 0x8B6F, [1250] = 0x8B74, [1251] = 0x8B7D, [1252] = 0x8B80,
-  [1253] = 0x8B8C, [1254] = 0x8B8E, [1255] = 0x8B92, [1256] = 0x8B93,
-  [1257] = 0x8B96, [1258] = 0x8B99, [1259] = 0x8B9A, [1260] = 0x8C3A,
-  [1261] = 0x8C41, [1262] = 0x8C3F, [1263] = 0x8C48, [1264] = 0x8C4C,
-  [1265] = 0x8C4E, [1266] = 0x8C50, [1267] = 0x8C55, [1268] = 0x8C62,
-  [1269] = 0x8C6C, [1270] = 0x8C78, [1271] = 0x8C7A, [1272] = 0x8C82,
-  [1273] = 0x8C89, [1274] = 0x8C85, [1275] = 0x8C8A, [1276] = 0x8C8D,
-  [1277] = 0x8C8E, [1278] = 0x8C94, [1279] = 0x8C7C, [1280] = 0x8C98,
-  [1281] = 0x621D, [1282] = 0x8CAD, [1283] = 0x8CAA, [1284] = 0x8CBD,
-  [1285] = 0x8CB2, [1286] = 0x8CB3, [1287] = 0x8CAE, [1288] = 0x8CB6,
-  [1289] = 0x8CC8, [1290] = 0x8CC1, [1291] = 0x8CE4, [1292] = 0x8CE3,
-  [1293] = 0x8CDA, [1294] = 0x8CFD, [1295] = 0x8CFA, [1296] = 0x8CFB,
-  [1297] = 0x8D04, [1298] = 0x8D05, [1299] = 0x8D0A, [1300] = 0x8D07,
-  [1301] = 0x8D0F, [1302] = 0x8D0D, [1303] = 0x8D10, [1304] = 0x9F4E,
-  [1305] = 0x8D13, [1306] = 0x8CCD, [1307] = 0x8D14, [1308] = 0x8D16,
-  [1309] = 0x8D67, [1310] = 0x8D6D, [1311] = 0x8D71, [1312] = 0x8D73,
-  [1313] = 0x8D81, [1314] = 0x8D99, [1315] = 0x8DC2, [1316] = 0x8DBE,
-  [1317] = 0x8DBA, [1318] = 0x8DCF, [1319] = 0x8DDA, [1320] = 0x8DD6,
-  [1321] = 0x8DCC, [1322] = 0x8DDB, [1323] = 0x8DCB, [1324] = 0x8DEA,
-  [1325] = 0x8DEB, [1326] = 0x8DDF, [1327] = 0x8DE3, [1328] = 0x8DFC,
-  [1329] = 0x8E08, [1330] = 0x8E09, [1331] = 0x8DFF, [1332] = 0x8E1D,
-  [1333] = 0x8E1E, [1334] = 0x8E10, [1335] = 0x8E1F, [1336] = 0x8E42,
-  [1337] = 0x8E35, [1338] = 0x8E30, [1339] = 0x8E34, [1340] = 0x8E4A,
-  [1344] = 0x8E47, [1345] = 0x8E49, [1346] = 0x8E4C, [1347] = 0x8E50,
-  [1348] = 0x8E48, [1349] = 0x8E59, [1350] = 0x8E64, [1351] = 0x8E60,
-  [1352] = 0x8E2A, [1353] = 0x8E63, [1354] = 0x8E55, [1355] = 0x8E76,
-  [1356] = 0x8E72, [1357] = 0x8E7C, [1358] = 0x8E81, [1359] = 0x8E87,
-  [1360] = 0x8E85, [1361] = 0x8E84, [1362] = 0x8E8B, [1363] = 0x8E8A,
-  [1364] = 0x8E93, [1365] = 0x8E91, [1366] = 0x8E94, [1367] = 0x8E99,
-  [1368] = 0x8EAA, [1369] = 0x8EA1, [1370] = 0x8EAC, [1371] = 0x8EB0,
-  [1372] = 0x8EC6, [1373] = 0x8EB1, [1374] = 0x8EBE, [1375] = 0x8EC5,
-  [1376] = 0x8EC8, [1377] = 0x8ECB, [1378] = 0x8EDB, [1379] = 0x8EE3,
-  [1380] = 0x8EFC, [1381] = 0x8EFB, [1382] = 0x8EEB, [1383] = 0x8EFE,
-  [1384] = 0x8F0A, [1385] = 0x8F05, [1386] = 0x8F15, [1387] = 0x8F12,
-  [1388] = 0x8F19, [1389] = 0x8F13, [1390] = 0x8F1C, [1391] = 0x8F1F,
-  [1392] = 0x8F1B, [1393] = 0x8F0C, [1394] = 0x8F26, [1395] = 0x8F33,
-  [1396] = 0x8F3B, [1397] = 0x8F39, [1398] = 0x8F45, [1399] = 0x8F42,
-  [1400] = 0x8F3E, [1401] = 0x8F4C, [1402] = 0x8F49, [1403] = 0x8F46,
-  [1404] = 0x8F4E, [1405] = 0x8F57, [1406] = 0x8F5C, [1408] = 0x8F62,
-  [1409] = 0x8F63, [1410] = 0x8F64, [1411] = 0x8F9C, [1412] = 0x8F9F,
-  [1413] = 0x8FA3, [1414] = 0x8FAD, [1415] = 0x8FAF, [1416] = 0x8FB7,
-  [1417] = 0x8FDA, [1418] = 0x8FE5, [1419] = 0x8FE2, [1420] = 0x8FEA,
-  [1421] = 0x8FEF, [1422] = 0x9087, [1423] = 0x8FF4, [1424] = 0x9005,
-  [1425] = 0x8FF9, [1426] = 0x8FFA, [1427] = 0x9011, [1428] = 0x9015,
-  [1429] = 0x9021, [1430] = 0x900D, [1431] = 0x901E, [1432] = 0x9016,
-  [1433] = 0x900B, [1434] = 0x9027, [1435] = 0x9036, [1436] = 0x9035,
-  [1437] = 0x9039, [1438] = 0x8FF8, [1439] = 0x904F, [1440] = 0x9050,
-  [1441] = 0x9051, [1442] = 0x9052, [1443] = 0x900E, [1444] = 0x9049,
-  [1445] = 0x903E, [1446] = 0x9056, [1447] = 0x9058, [1448] = 0x905E,
-  [1449] = 0x9068, [1450] = 0x906F, [1451] = 0x9076, [1452] = 0x96A8,
-  [1453] = 0x9072, [1454] = 0x9082, [1455] = 0x907D, [1456] = 0x9081,
-  [1457] = 0x9080, [1458] = 0x908A, [1459] = 0x9089, [1460] = 0x908F,
-  [1461] = 0x90A8, [1462] = 0x90AF, [1463] = 0x90B1, [1464] = 0x90B5,
-  [1465] = 0x90E2, [1466] = 0x90E4, [1467] = 0x6248, [1468] = 0x90DB,
-  [1469] = 0x9102, [1470] = 0x9112, [1471] = 0x9119, [1472] = 0x9132,
-  [1473] = 0x9130, [1474] = 0x914A, [1475] = 0x9156, [1476] = 0x9158,
-  [1477] = 0x9163, [1478] = 0x9165, [1479] = 0x9169, [1480] = 0x9173,
-  [1481] = 0x9172, [1482] = 0x918B, [1483] = 0x9189, [1484] = 0x9182,
-  [1485] = 0x91A2, [1486] = 0x91AB, [1487] = 0x91AF, [1488] = 0x91AA,
-  [1489] = 0x91B5, [1490] = 0x91B4, [1491] = 0x91BA, [1492] = 0x91C0,
-  [1493] = 0x91C1, [1494] = 0x91C9, [1495] = 0x91CB, [1496] = 0x91D0,
-  [1497] = 0x91D6, [1498] = 0x91DF, [1499] = 0x91E1, [1500] = 0x91DB,
-  [1501] = 0x91FC, [1502] = 0x91F5, [1503] = 0x91F6, [1504] = 0x921E,
-  [1505] = 0x91FF, [1506] = 0x9214, [1507] = 0x922C, [1508] = 0x9215,
-  [1509] = 0x9211, [1510] = 0x925E, [1511] = 0x9257, [1512] = 0x9245,
-  [1513] = 0x9249, [1514] = 0x9264, [1515] = 0x9248, [1516] = 0x9295,
-  [1517] = 0x923F, [1518] = 0x924B, [1519] = 0x9250, [1520] = 0x929C,
-  [1521] = 0x9296, [1522] = 0x9293, [1523] = 0x929B, [1524] = 0x925A,
-  [1525] = 0x92CF, [1526] = 0x92B9, [1527] = 0x92B7, [1528] = 0x92E9,
-  [1529] = 0x930F, [1530] = 0x92FA, [1531] = 0x9344, [1532] = 0x932E,
-  [1536] = 0x9319, [1537] = 0x9322, [1538] = 0x931A, [1539] = 0x9323,
-  [1540] = 0x933A, [1541] = 0x9335, [1542] = 0x933B, [1543] = 0x935C,
-  [1544] = 0x9360, [1545] = 0x937C, [1546] = 0x936E, [1547] = 0x9356,
-  [1548] = 0x93B0, [1549] = 0x93AC, [1550] = 0x93AD, [1551] = 0x9394,
-  [1552] = 0x93B9, [1553] = 0x93D6, [1554] = 0x93D7, [1555] = 0x93E8,
-  [1556] = 0x93E5, [1557] = 0x93D8, [1558] = 0x93C3, [1559] = 0x93DD,
-  [1560] = 0x93D0, [1561] = 0x93C8, [1562] = 0x93E4, [1563] = 0x941A,
-  [1564] = 0x9414, [1565] = 0x9413, [1566] = 0x9403, [1567] = 0x9407,
-  [1568] = 0x9410, [1569] = 0x9436, [1570] = 0x942B, [1571] = 0x9435,
-  [1572] = 0x9421, [1573] = 0x943A, [1574] = 0x9441, [1575] = 0x9452,
-  [1576] = 0x9444, [1577] = 0x945B, [1578] = 0x9460, [1579] = 0x9462,
-  [1580] = 0x945E, [1581] = 0x946A, [1582] = 0x9229, [1583] = 0x9470,
-  [1584] = 0x9475, [1585] = 0x9477, [1586] = 0x947D, [1587] = 0x945A,
-  [1588] = 0x947C, [1589] = 0x947E, [1590] = 0x9481, [1591] = 0x947F,
-  [1592] = 0x9582, [1593] = 0x9587, [1594] = 0x958A, [1595] = 0x9594,
-  [1596] = 0x9596, [1597] = 0x9598, [1598] = 0x9599, [1600] = 0x95A0,
-  [1601] = 0x95A8, [1602] = 0x95A7, [1603] = 0x95AD, [1604] = 0x95BC,
-  [1605] = 0x95BB, [1606] = 0x95B9, [1607] = 0x95BE, [1608] = 0x95CA,
-  [1609] = 0x6FF6, [1610] = 0x95C3, [1611] = 0x95CD, [1612] = 0x95CC,
-  [1613] = 0x95D5, [1614] = 0x95D4, [1615] = 0x95D6, [1616] = 0x95DC,
-  [1617] = 0x95E1, [1618] = 0x95E5, [1619] = 0x95E2, [1620] = 0x9621,
-  [1621] = 0x9628, [1622] = 0x962E, [1623] = 0x962F, [1624] = 0x9642,
-  [1625] = 0x964C, [1626] = 0x964F, [1627] = 0x964B, [1628] = 0x9677,
-  [1629] = 0x965C, [1630] = 0x965E, [1631] = 0x965D, [1632] = 0x965F,
-  [1633] = 0x9666, [1634] = 0x9672, [1635] = 0x966C, [1636] = 0x968D,
-  [1637] = 0x9698, [1638] = 0x9695, [1639] = 0x9697, [1640] = 0x96AA,
-  [1641] = 0x96A7, [1642] = 0x96B1, [1643] = 0x96B2, [1644] = 0x96B0,
-  [1645] = 0x96B4, [1646] = 0x96B6, [1647] = 0x96B8, [1648] = 0x96B9,
-  [1649] = 0x96CE, [1650] = 0x96CB, [1651] = 0x96C9, [1652] = 0x96CD,
-  [1653] = 0x894D, [1654] = 0x96DC, [1655] = 0x970D, [1656] = 0x96D5,
-  [1657] = 0x96F9, [1658] = 0x9704, [1659] = 0x9706, [1660] = 0x9708,
-  [1661] = 0x9713, [1662] = 0x970E, [1663] = 0x9711, [1664] = 0x970F,
-  [1665] = 0x9716, [1666] = 0x9719, [1667] = 0x9724, [1668] = 0x972A,
-  [1669] = 0x9730, [1670] = 0x9739, [1671] = 0x973D, [1672] = 0x973E,
-  [1673] = 0x9744, [1674] = 0x9746, [1675] = 0x9748, [1676] = 0x9742,
-  [1677] = 0x9749, [1678] = 0x975C, [1679] = 0x9760, [1680] = 0x9764,
-  [1681] = 0x9766, [1682] = 0x9768, [1683] = 0x52D2, [1684] = 0x976B,
-  [1685] = 0x9771, [1686] = 0x9779, [1687] = 0x9785, [1688] = 0x977C,
-  [1689] = 0x9781, [1690] = 0x977A, [1691] = 0x9786, [1692] = 0x978B,
-  [1693] = 0x978F, [1694] = 0x9790, [1695] = 0x979C, [1696] = 0x97A8,
-  [1697] = 0x97A6, [1698] = 0x97A3, [1699] = 0x97B3, [1700] = 0x97B4,
-  [1701] = 0x97C3, [1702] = 0x97C6, [1703] = 0x97C8, [1704] = 0x97CB,
-  [1705] = 0x97DC, [1706] = 0x97ED, [1707] = 0x9F4F, [1708] = 0x97F2,
-  [1709] = 0x7ADF, [1710] = 0x97F6, [1711] = 0x97F5, [1712] = 0x980F,
-  [1713] = 0x980C, [1714] = 0x9838, [1715] = 0x9824, [1716] = 0x9821,
-  [1717] = 0x9837, [1718] = 0x983D, [1719] = 0x9846, [1720] = 0x984F,
-  [1721] = 0x984B, [1722] = 0x986B, [1723] = 0x986F, [1724] = 0x9870,
-  [1728] = 0x9871, [1729] = 0x9874, [1730] = 0x9873, [1731] = 0x98AA,
-  [1732] = 0x98AF, [1733] = 0x98B1, [1734] = 0x98B6, [1735] = 0x98C4,
-  [1736] = 0x98C3, [1737] = 0x98C6, [1738] = 0x98E9, [1739] = 0x98EB,
-  [1740] = 0x9903, [1741] = 0x9909, [1742] = 0x9912, [1743] = 0x9914,
-  [1744] = 0x9918, [1745] = 0x9921, [1746] = 0x991D, [1747] = 0x991E,
-  [1748] = 0x9924, [1749] = 0x9920, [1750] = 0x992C, [1751] = 0x992E,
-  [1752] = 0x993D, [1753] = 0x993E, [1754] = 0x9942, [1755] = 0x9949,
-  [1756] = 0x9945, [1757] = 0x9950, [1758] = 0x994B, [1759] = 0x9951,
-  [1760] = 0x9952, [1761] = 0x994C, [1762] = 0x9955, [1763] = 0x9997,
-  [1764] = 0x9998, [1765] = 0x99A5, [1766] = 0x99AD, [1767] = 0x99AE,
-  [1768] = 0x99BC, [1769] = 0x99DF, [1770] = 0x99DB, [1771] = 0x99DD,
-  [1772] = 0x99D8, [1773] = 0x99D1, [1774] = 0x99ED, [1775] = 0x99EE,
-  [1776] = 0x99F1, [1777] = 0x99F2, [1778] = 0x99FB, [1779] = 0x99F8,
-  [1780] = 0x9A01, [1781] = 0x9A0F, [1782] = 0x9A05, [1783] = 0x99E2,
-  [1784] = 0x9A19, [1785] = 0x9A2B, [1786] = 0x9A37, [1787] = 0x9A45,
-  [1788] = 0x9A42, [1789] = 0x9A40, [1790] = 0x9A43, [1792] = 0x9A3E,
-  [1793] = 0x9A55, [1794] = 0x9A4D, [1795] = 0x9A5B, [1796] = 0x9A57,
-  [1797] = 0x9A5F, [1798] = 0x9A62, [1799] = 0x9A65, [1800] = 0x9A64,
-  [1801] = 0x9A69, [1802] = 0x9A6B, [1803] = 0x9A6A, [1804] = 0x9AAD,
-  [1805] = 0x9AB0, [1806] = 0x9ABC, [1807] = 0x9AC0, [1808] = 0x9ACF,
-  [1809] = 0x9AD1, [1810] = 0x9AD3, [1811] = 0x9AD4, [1812] = 0x9ADE,
-  [1813] = 0x9ADF, [1814] = 0x9AE2, [1815] = 0x9AE3, [1816] = 0x9AE6,
-  [1817] = 0x9AEF, [1818] = 0x9AEB, [1819] = 0x9AEE, [1820] = 0x9AF4,
-  [1821] = 0x9AF1, [1822] = 0x9AF7, [1823] = 0x9AFB, [1824] = 0x9B06,
-  [1825] = 0x9B18, [1826] = 0x9B1A, [1827] = 0x9B1F, [1828] = 0x9B22,
-  [1829] = 0x9B23, [1830] = 0x9B25, [1831] = 0x9B27, [1832] = 0x9B28,
-  [1833] = 0x9B29, [1834] = 0x9B2A, [1835] = 0x9B2E, [1836] = 0x9B2F,
-  [1837] = 0x9B32, [1838] = 0x9B44, [1839] = 0x9B43, [1840] = 0x9B4F,
-  [1841] = 0x9B4D, [1842] = 0x9B4E, [1843] = 0x9B51, [1844] = 0x9B58,
-  [1845] = 0x9B74, [1846] = 0x9B93, [1847] = 0x9B83, [1848] = 0x9B91,
-  [1849] = 0x9B96, [1850] = 0x9B97, [1851] = 0x9B9F, [1852] = 0x9BA0,
-  [1853] = 0x9BA8, [1854] = 0x9BB4, [1855] = 0x9BC0, [1856] = 0x9BCA,
-  [1857] = 0x9BB9, [1858] = 0x9BC6, [1859] = 0x9BCF, [1860] = 0x9BD1,
-  [1861] = 0x9BD2, [1862] = 0x9BE3, [1863] = 0x9BE2, [1864] = 0x9BE4,
-  [1865] = 0x9BD4, [1866] = 0x9BE1, [1867] = 0x9C3A, [1868] = 0x9BF2,
-  [1869] = 0x9BF1, [1870] = 0x9BF0, [1871] = 0x9C15, [1872] = 0x9C14,
-  [1873] = 0x9C09, [1874] = 0x9C13, [1875] = 0x9C0C, [1876] = 0x9C06,
-  [1877] = 0x9C08, [1878] = 0x9C12, [1879] = 0x9C0A, [1880] = 0x9C04,
-  [1881] = 0x9C2E, [1882] = 0x9C1B, [1883] = 0x9C25, [1884] = 0x9C24,
-  [1885] = 0x9C21, [1886] = 0x9C30, [1887] = 0x9C47, [1888] = 0x9C32,
-  [1889] = 0x9C46, [1890] = 0x9C3E, [1891] = 0x9C5A, [1892] = 0x9C60,
-  [1893] = 0x9C67, [1894] = 0x9C76, [1895] = 0x9C78, [1896] = 0x9CE7,
-  [1897] = 0x9CEC, [1898] = 0x9CF0, [1899] = 0x9D09, [1900] = 0x9D08,
-  [1901] = 0x9CEB, [1902] = 0x9D03, [1903] = 0x9D06, [1904] = 0x9D2A,
-  [1905] = 0x9D26, [1906] = 0x9DAF, [1907] = 0x9D23, [1908] = 0x9D1F,
-  [1909] = 0x9D44, [1910] = 0x9D15, [1911] = 0x9D12, [1912] = 0x9D41,
-  [1913] = 0x9D3F, [1914] = 0x9D3E, [1915] = 0x9D46, [1916] = 0x9D48,
-  [1920] = 0x9D5D, [1921] = 0x9D5E, [1922] = 0x9D64, [1923] = 0x9D51,
-  [1924] = 0x9D50, [1925] = 0x9D59, [1926] = 0x9D72, [1927] = 0x9D89,
-  [1928] = 0x9D87, [1929] = 0x9DAB, [1930] = 0x9D6F, [1931] = 0x9D7A,
-  [1932] = 0x9D9A, [1933] = 0x9DA4, [1934] = 0x9DA9, [1935] = 0x9DB2,
-  [1936] = 0x9DC4, [1937] = 0x9DC1, [1938] = 0x9DBB, [1939] = 0x9DB8,
-  [1940] = 0x9DBA, [1941] = 0x9DC6, [1942] = 0x9DCF, [1943] = 0x9DC2,
-  [1944] = 0x9DD9, [1945] = 0x9DD3, [1946] = 0x9DF8, [1947] = 0x9DE6,
-  [1948] = 0x9DED, [1949] = 0x9DEF, [1950] = 0x9DFD, [1951] = 0x9E1A,
-  [1952] = 0x9E1B, [1953] = 0x9E1E, [1954] = 0x9E75, [1955] = 0x9E79,
-  [1956] = 0x9E7D, [1957] = 0x9E81, [1958] = 0x9E88, [1959] = 0x9E8B,
-  [1960] = 0x9E8C, [1961] = 0x9E92, [1962] = 0x9E95, [1963] = 0x9E91,
-  [1964] = 0x9E9D, [1965] = 0x9EA5, [1966] = 0x9EA9, [1967] = 0x9EB8,
-  [1968] = 0x9EAA, [1969] = 0x9EAD, [1970] = 0x9761, [1971] = 0x9ECC,
-  [1972] = 0x9ECE, [1973] = 0x9ECF, [1974] = 0x9ED0, [1975] = 0x9ED4,
-  [1976] = 0x9EDC, [1977] = 0x9EDE, [1978] = 0x9EDD, [1979] = 0x9EE0,
-  [1980] = 0x9EE5, [1981] = 0x9EE8, [1982] = 0x9EEF, [1984] = 0x9EF4,
-  [1985] = 0x9EF6, [1986] = 0x9EF7, [1987] = 0x9EF9, [1988] = 0x9EFB,
-  [1989] = 0x9EFC, [1990] = 0x9EFD, [1991] = 0x9F07, [1992] = 0x9F08,
-  [1993] = 0x76B7, [1994] = 0x9F15, [1995] = 0x9F21, [1996] = 0x9F2C,
-  [1997] = 0x9F3E, [1998] = 0x9F4A, [1999] = 0x9F52, [2000] = 0x9F54,
-  [2001] = 0x9F63, [2002] = 0x9F5F, [2003] = 0x9F60, [2004] = 0x9F61,
-  [2005] = 0x9F66, [2006] = 0x9F67, [2007] = 0x9F6C, [2008] = 0x9F6A,
-  [2009] = 0x9F77, [2010] = 0x9F72, [2011] = 0x9F76, [2012] = 0x9F95,
-  [2013] = 0x9F9C, [2014] = 0x9FA0, [2015] = 0x582F, [2016] = 0x69C7,
-  [2017] = 0x9059, [2018] = 0x7464, [2019] = 0x51DC, [2020] = 0x7199
-};
-
-
-
-
-/* The following table can be generated using
-
-   awk '/^0x/ { print $2, $1; }' < .../eastasia/jis/shiftjis.txt |
-   egrep "^0x00[[:xdigit:]][[:xdigit:]]" |
-   sort -u | perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=0;
-   while (<>) {
-     local($ucs4, $sjis, %rest) = split;
-     local($u)=hex($ucs4);
-     local($s)=hex($sjis);
-     printf ("\n ") if ($n % 3 == 0);
-     ++$n;
-     printf (" [0x%04x] = \"\\x%02x\\x%02x\",", $u,
-	     $s < 0x100 ? $s : int($s/256), $s < 0x100 ? 0 : $s&255);
-   }
-   printf ("\n");
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-   The only problem is that the shiftjis.txt file does not contain the
-   mapping for the characters 0x00 to 0x1f.  We add them ourself.
-
-   A much bigger problem is that mapping of the tilde and the backslash
-   character.  There are no such characters in SJIS.  The proposed
-   handling is to simply map the two input values to the corresponding
-   byte values of ASCII.  Things fall more or less in place this way.
-*/
-static const char from_ucs4_lat1[0xf8][2] =
-{
-  [0x0000] = "\x00\x00", [0x0001] = "\x01\x00", [0x0002] = "\x02\x00",
-  [0x0003] = "\x03\x00", [0x0004] = "\x04\x00", [0x0005] = "\x05\x00",
-  [0x0006] = "\x06\x00", [0x0007] = "\x07\x00", [0x0008] = "\x08\x00",
-  [0x0009] = "\x09\x00", [0x000a] = "\x0a\x00", [0x000b] = "\x0b\x00",
-  [0x000c] = "\x0c\x00", [0x000d] = "\x0d\x00", [0x000e] = "\x0e\x00",
-  [0x000f] = "\x0f\x00", [0x0010] = "\x10\x00", [0x0011] = "\x11\x00",
-  [0x0012] = "\x12\x00", [0x0013] = "\x13\x00", [0x0014] = "\x14\x00",
-  [0x0015] = "\x15\x00", [0x0016] = "\x16\x00", [0x0017] = "\x17\x00",
-  [0x0018] = "\x18\x00", [0x0019] = "\x19\x00", [0x001a] = "\x1a\x00",
-  [0x001b] = "\x1b\x00", [0x001c] = "\x1c\x00", [0x001d] = "\x1d\x00",
-  [0x001e] = "\x1e\x00", [0x001f] = "\x1f\x00", [0x0020] = "\x20\x00",
-  [0x0021] = "\x21\x00", [0x0022] = "\x22\x00", [0x0023] = "\x23\x00",
-  [0x0024] = "\x24\x00", [0x0025] = "\x25\x00", [0x0026] = "\x26\x00",
-  [0x0027] = "\x27\x00", [0x0028] = "\x28\x00", [0x0029] = "\x29\x00",
-  [0x002a] = "\x2a\x00", [0x002b] = "\x2b\x00", [0x002c] = "\x2c\x00",
-  [0x002d] = "\x2d\x00", [0x002e] = "\x2e\x00", [0x002f] = "\x2f\x00",
-  [0x0030] = "\x30\x00", [0x0031] = "\x31\x00", [0x0032] = "\x32\x00",
-  [0x0033] = "\x33\x00", [0x0034] = "\x34\x00", [0x0035] = "\x35\x00",
-  [0x0036] = "\x36\x00", [0x0037] = "\x37\x00", [0x0038] = "\x38\x00",
-  [0x0039] = "\x39\x00", [0x003a] = "\x3a\x00", [0x003b] = "\x3b\x00",
-  [0x003c] = "\x3c\x00", [0x003d] = "\x3d\x00", [0x003e] = "\x3e\x00",
-  [0x003f] = "\x3f\x00", [0x0040] = "\x40\x00", [0x0041] = "\x41\x00",
-  [0x0042] = "\x42\x00", [0x0043] = "\x43\x00", [0x0044] = "\x44\x00",
-  [0x0045] = "\x45\x00", [0x0046] = "\x46\x00", [0x0047] = "\x47\x00",
-  [0x0048] = "\x48\x00", [0x0049] = "\x49\x00", [0x004a] = "\x4a\x00",
-  [0x004b] = "\x4b\x00", [0x004c] = "\x4c\x00", [0x004d] = "\x4d\x00",
-  [0x004e] = "\x4e\x00", [0x004f] = "\x4f\x00", [0x0050] = "\x50\x00",
-  [0x0051] = "\x51\x00", [0x0052] = "\x52\x00", [0x0053] = "\x53\x00",
-  [0x0054] = "\x54\x00", [0x0055] = "\x55\x00", [0x0056] = "\x56\x00",
-  [0x0057] = "\x57\x00", [0x0058] = "\x58\x00", [0x0059] = "\x59\x00",
-  [0x005a] = "\x5a\x00", [0x005b] = "\x5b\x00", [0x005c] = "\x5c\x00",
-  [0x005d] = "\x5d\x00", [0x005e] = "\x5e\x00", [0x005f] = "\x5f\x00",
-  [0x0060] = "\x60\x00", [0x0061] = "\x61\x00", [0x0062] = "\x62\x00",
-  [0x0063] = "\x63\x00", [0x0064] = "\x64\x00", [0x0065] = "\x65\x00",
-  [0x0066] = "\x66\x00", [0x0067] = "\x67\x00", [0x0068] = "\x68\x00",
-  [0x0069] = "\x69\x00", [0x006a] = "\x6a\x00", [0x006b] = "\x6b\x00",
-  [0x006c] = "\x6c\x00", [0x006d] = "\x6d\x00", [0x006e] = "\x6e\x00",
-  [0x006f] = "\x6f\x00", [0x0070] = "\x70\x00", [0x0071] = "\x71\x00",
-  [0x0072] = "\x72\x00", [0x0073] = "\x73\x00", [0x0074] = "\x74\x00",
-  [0x0075] = "\x75\x00", [0x0076] = "\x76\x00", [0x0077] = "\x77\x00",
-  [0x0078] = "\x78\x00", [0x0079] = "\x79\x00", [0x007a] = "\x7a\x00",
-  [0x007b] = "\x7b\x00", [0x007c] = "\x7c\x00", [0x007d] = "\x7d\x00",
-  [0x007e] = "\x7e\x00", [0x007f] = "\x7f\x00",
-  [0x00a2] = "\x81\x91", [0x00a3] = "\x81\x92", [0x00a5] = "\x5c\x00",
-  [0x00a7] = "\x81\x98", [0x00a8] = "\x81\x4e", [0x00ac] = "\x81\xca",
-  [0x00b0] = "\x81\x8b", [0x00b1] = "\x81\x7d", [0x00b4] = "\x81\x4c",
-  [0x00b6] = "\x81\xf7", [0x00d7] = "\x81\x7e", [0x00f7] = "\x81\x80"
-};
-
-
-/* The following table can be generated using
-
-   awk '/^0x/ { print $2, $1; }' < .../eastasia/jis/shiftjis.txt |
-   egrep "^0x0[34][[:xdigit:]][[:xdigit:]]" |
-   sort -u | perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=0;
-   while (<>) {
-     local($ucs4, $sjis, %rest) = split;
-     local($u)=hex($ucs4);
-     local($s)=hex($sjis);
-     printf ("\n ") if ($n % 3 == 0);
-     ++$n;
-     printf (" [0x%04x] = \"\\x%02x\\x%02x\",", $u - 0x391,
-	     $s < 0x100 ? $s : int($s/256), $s < 0x100 ? 0 : $s&255);
-   }
-   printf ("\n");
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-static const char from_ucs4_greek[193][2] =
-{
-  [0x0000] = "\x83\x9f", [0x0001] = "\x83\xa0", [0x0002] = "\x83\xa1",
-  [0x0003] = "\x83\xa2", [0x0004] = "\x83\xa3", [0x0005] = "\x83\xa4",
-  [0x0006] = "\x83\xa5", [0x0007] = "\x83\xa6", [0x0008] = "\x83\xa7",
-  [0x0009] = "\x83\xa8", [0x000a] = "\x83\xa9", [0x000b] = "\x83\xaa",
-  [0x000c] = "\x83\xab", [0x000d] = "\x83\xac", [0x000e] = "\x83\xad",
-  [0x000f] = "\x83\xae", [0x0010] = "\x83\xaf", [0x0012] = "\x83\xb0",
-  [0x0013] = "\x83\xb1", [0x0014] = "\x83\xb2", [0x0015] = "\x83\xb3",
-  [0x0016] = "\x83\xb4", [0x0017] = "\x83\xb5", [0x0018] = "\x83\xb6",
-  [0x0020] = "\x83\xbf", [0x0021] = "\x83\xc0", [0x0022] = "\x83\xc1",
-  [0x0023] = "\x83\xc2", [0x0024] = "\x83\xc3", [0x0025] = "\x83\xc4",
-  [0x0026] = "\x83\xc5", [0x0027] = "\x83\xc6", [0x0028] = "\x83\xc7",
-  [0x0029] = "\x83\xc8", [0x002a] = "\x83\xc9", [0x002b] = "\x83\xca",
-  [0x002c] = "\x83\xcb", [0x002d] = "\x83\xcc", [0x002e] = "\x83\xcd",
-  [0x002f] = "\x83\xce", [0x0030] = "\x83\xcf", [0x0032] = "\x83\xd0",
-  [0x0033] = "\x83\xd1", [0x0034] = "\x83\xd2", [0x0035] = "\x83\xd3",
-  [0x0036] = "\x83\xd4", [0x0037] = "\x83\xd5", [0x0038] = "\x83\xd6",
-  [0x0070] = "\x84\x46", [0x007f] = "\x84\x40", [0x0080] = "\x84\x41",
-  [0x0081] = "\x84\x42", [0x0082] = "\x84\x43", [0x0083] = "\x84\x44",
-  [0x0084] = "\x84\x45", [0x0085] = "\x84\x47", [0x0086] = "\x84\x48",
-  [0x0087] = "\x84\x49", [0x0088] = "\x84\x4a", [0x0089] = "\x84\x4b",
-  [0x008a] = "\x84\x4c", [0x008b] = "\x84\x4d", [0x008c] = "\x84\x4e",
-  [0x008d] = "\x84\x4f", [0x008e] = "\x84\x50", [0x008f] = "\x84\x51",
-  [0x0090] = "\x84\x52", [0x0091] = "\x84\x53", [0x0092] = "\x84\x54",
-  [0x0093] = "\x84\x55", [0x0094] = "\x84\x56", [0x0095] = "\x84\x57",
-  [0x0096] = "\x84\x58", [0x0097] = "\x84\x59", [0x0098] = "\x84\x5a",
-  [0x0099] = "\x84\x5b", [0x009a] = "\x84\x5c", [0x009b] = "\x84\x5d",
-  [0x009c] = "\x84\x5e", [0x009d] = "\x84\x5f", [0x009e] = "\x84\x60",
-  [0x009f] = "\x84\x70", [0x00a0] = "\x84\x71", [0x00a1] = "\x84\x72",
-  [0x00a2] = "\x84\x73", [0x00a3] = "\x84\x74", [0x00a4] = "\x84\x75",
-  [0x00a5] = "\x84\x77", [0x00a6] = "\x84\x78", [0x00a7] = "\x84\x79",
-  [0x00a8] = "\x84\x7a", [0x00a9] = "\x84\x7b", [0x00aa] = "\x84\x7c",
-  [0x00ab] = "\x84\x7d", [0x00ac] = "\x84\x7e", [0x00ad] = "\x84\x80",
-  [0x00ae] = "\x84\x81", [0x00af] = "\x84\x82", [0x00b0] = "\x84\x83",
-  [0x00b1] = "\x84\x84", [0x00b2] = "\x84\x85", [0x00b3] = "\x84\x86",
-  [0x00b4] = "\x84\x87", [0x00b5] = "\x84\x88", [0x00b6] = "\x84\x89",
-  [0x00b7] = "\x84\x8a", [0x00b8] = "\x84\x8b", [0x00b9] = "\x84\x8c",
-  [0x00ba] = "\x84\x8d", [0x00bb] = "\x84\x8e", [0x00bc] = "\x84\x8f",
-  [0x00bd] = "\x84\x90", [0x00be] = "\x84\x91", [0x00c0] = "\x84\x76"
-};
-
-
-/* The mapping of the Kanji is horrible.  The glyphs covered by Shift JIS
-   are spreaded all around the Unicode CJK area.  We use one big table
-   since using the gaps will not buy us much.
-
-   The following table can be generated using
-
-   awk '/^0x/ { print $2, $1; }' < ...eastasia/jis/shiftjis.txt |
-   egrep "^0x[2-9][[:xdigit:]][[:xdigit:]][[:xdigit:]]" |
-   sort -u | perl tab.pl
-
-   where tab.pl is
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   $n=0;
-   while (<>) {
-     local($ucs4, $sjis, %rest) = split;
-     local($u)=hex($ucs4);
-     local($s)=hex($sjis);
-     printf ("\n ") if ($n % 3 == 0);
-     ++$n;
-     printf (" [0x%04x] = \"\\x%02x\\x%02x\",", $u - 0x2010,
-	     $s < 0x100 ? $s : int($s/256), $s < 0x100 ? 0 : $s&255);
-   }
-   printf ("\n");
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-*/
-static const char from_ucs4_cjk[32657][2] =
-{
-  [0x0000] = "\x81\x5d", [0x0005] = "\x81\x5c", [0x0006] = "\x81\x61",
-  [0x0008] = "\x81\x65", [0x0009] = "\x81\x66", [0x000c] = "\x81\x67",
-  [0x000d] = "\x81\x68", [0x0010] = "\x81\xf5", [0x0011] = "\x81\xf6",
-  [0x0015] = "\x81\x64", [0x0016] = "\x81\x63", [0x0020] = "\x81\xf1",
-  [0x0022] = "\x81\x8c", [0x0023] = "\x81\x8d", [0x002b] = "\x81\xa6",
-  [0x002e] = "\x7e\x00", [0x00f3] = "\x81\x8e", [0x011b] = "\x81\xf0",
-  [0x0180] = "\x81\xa9", [0x0181] = "\x81\xaa", [0x0182] = "\x81\xa8",
-  [0x0183] = "\x81\xab", [0x01c2] = "\x81\xcb", [0x01c4] = "\x81\xcc",
-  [0x01f0] = "\x81\xcd", [0x01f2] = "\x81\xdd", [0x01f3] = "\x81\xce",
-  [0x01f7] = "\x81\xde", [0x01f8] = "\x81\xb8", [0x01fb] = "\x81\xb9",
-  [0x0202] = "\x81\x7c", [0x020a] = "\x81\xe3", [0x020d] = "\x81\xe5",
-  [0x020e] = "\x81\x87", [0x0210] = "\x81\xda", [0x0217] = "\x81\xc8",
-  [0x0218] = "\x81\xc9", [0x0219] = "\x81\xbf", [0x021a] = "\x81\xbe",
-  [0x021b] = "\x81\xe7", [0x021c] = "\x81\xe8", [0x0224] = "\x81\x88",
-  [0x0225] = "\x81\xe6", [0x022d] = "\x81\xe4", [0x0242] = "\x81\xe0",
-  [0x0250] = "\x81\x82", [0x0251] = "\x81\xdf", [0x0256] = "\x81\x85",
-  [0x0257] = "\x81\x86", [0x025a] = "\x81\xe1", [0x025b] = "\x81\xe2",
-  [0x0272] = "\x81\xbc", [0x0273] = "\x81\xbd", [0x0276] = "\x81\xba",
-  [0x0277] = "\x81\xbb", [0x0295] = "\x81\xdb", [0x0302] = "\x81\xdc",
-  [0x04f0] = "\x84\x9f", [0x04f1] = "\x84\xaa", [0x04f2] = "\x84\xa0",
-  [0x04f3] = "\x84\xab", [0x04fc] = "\x84\xa1", [0x04ff] = "\x84\xac",
-  [0x0500] = "\x84\xa2", [0x0503] = "\x84\xad", [0x0504] = "\x84\xa4",
-  [0x0507] = "\x84\xaf", [0x0508] = "\x84\xa3", [0x050b] = "\x84\xae",
-  [0x050c] = "\x84\xa5", [0x050d] = "\x84\xba", [0x0510] = "\x84\xb5",
-  [0x0513] = "\x84\xb0", [0x0514] = "\x84\xa7", [0x0515] = "\x84\xbc",
-  [0x0518] = "\x84\xb7", [0x051b] = "\x84\xb2", [0x051c] = "\x84\xa6",
-  [0x051f] = "\x84\xb6", [0x0520] = "\x84\xbb", [0x0523] = "\x84\xb1",
-  [0x0524] = "\x84\xa8", [0x0527] = "\x84\xb8", [0x0528] = "\x84\xbd",
-  [0x052b] = "\x84\xb3", [0x052c] = "\x84\xa9", [0x052f] = "\x84\xb9",
-  [0x0532] = "\x84\xbe", [0x053b] = "\x84\xb4", [0x0590] = "\x81\xa1",
-  [0x0591] = "\x81\xa0", [0x05a2] = "\x81\xa3", [0x05a3] = "\x81\xa2",
-  [0x05ac] = "\x81\xa5", [0x05ad] = "\x81\xa4", [0x05b6] = "\x81\x9f",
-  [0x05b7] = "\x81\x9e", [0x05bb] = "\x81\x9b", [0x05be] = "\x81\x9d",
-  [0x05bf] = "\x81\x9c", [0x05df] = "\x81\xfc", [0x05f5] = "\x81\x9a",
-  [0x05f6] = "\x81\x99", [0x0630] = "\x81\x8a", [0x0632] = "\x81\x89",
-  [0x065a] = "\x81\xf4", [0x065d] = "\x81\xf3", [0x065f] = "\x81\xf2",
-  [0x0ff0] = "\x81\x40", [0x0ff1] = "\x81\x41", [0x0ff2] = "\x81\x42",
-  [0x0ff3] = "\x81\x56", [0x0ff5] = "\x81\x58", [0x0ff6] = "\x81\x59",
-  [0x0ff7] = "\x81\x5a", [0x0ff8] = "\x81\x71", [0x0ff9] = "\x81\x72",
-  [0x0ffa] = "\x81\x73", [0x0ffb] = "\x81\x74", [0x0ffc] = "\x81\x75",
-  [0x0ffd] = "\x81\x76", [0x0ffe] = "\x81\x77", [0x0fff] = "\x81\x78",
-  [0x1000] = "\x81\x79", [0x1001] = "\x81\x7a", [0x1002] = "\x81\xa7",
-  [0x1003] = "\x81\xac", [0x1004] = "\x81\x6b", [0x1005] = "\x81\x6c",
-  [0x100c] = "\x81\x60", [0x1031] = "\x82\x9f", [0x1032] = "\x82\xa0",
-  [0x1033] = "\x82\xa1", [0x1034] = "\x82\xa2", [0x1035] = "\x82\xa3",
-  [0x1036] = "\x82\xa4", [0x1037] = "\x82\xa5", [0x1038] = "\x82\xa6",
-  [0x1039] = "\x82\xa7", [0x103a] = "\x82\xa8", [0x103b] = "\x82\xa9",
-  [0x103c] = "\x82\xaa", [0x103d] = "\x82\xab", [0x103e] = "\x82\xac",
-  [0x103f] = "\x82\xad", [0x1040] = "\x82\xae", [0x1041] = "\x82\xaf",
-  [0x1042] = "\x82\xb0", [0x1043] = "\x82\xb1", [0x1044] = "\x82\xb2",
-  [0x1045] = "\x82\xb3", [0x1046] = "\x82\xb4", [0x1047] = "\x82\xb5",
-  [0x1048] = "\x82\xb6", [0x1049] = "\x82\xb7", [0x104a] = "\x82\xb8",
-  [0x104b] = "\x82\xb9", [0x104c] = "\x82\xba", [0x104d] = "\x82\xbb",
-  [0x104e] = "\x82\xbc", [0x104f] = "\x82\xbd", [0x1050] = "\x82\xbe",
-  [0x1051] = "\x82\xbf", [0x1052] = "\x82\xc0", [0x1053] = "\x82\xc1",
-  [0x1054] = "\x82\xc2", [0x1055] = "\x82\xc3", [0x1056] = "\x82\xc4",
-  [0x1057] = "\x82\xc5", [0x1058] = "\x82\xc6", [0x1059] = "\x82\xc7",
-  [0x105a] = "\x82\xc8", [0x105b] = "\x82\xc9", [0x105c] = "\x82\xca",
-  [0x105d] = "\x82\xcb", [0x105e] = "\x82\xcc", [0x105f] = "\x82\xcd",
-  [0x1060] = "\x82\xce", [0x1061] = "\x82\xcf", [0x1062] = "\x82\xd0",
-  [0x1063] = "\x82\xd1", [0x1064] = "\x82\xd2", [0x1065] = "\x82\xd3",
-  [0x1066] = "\x82\xd4", [0x1067] = "\x82\xd5", [0x1068] = "\x82\xd6",
-  [0x1069] = "\x82\xd7", [0x106a] = "\x82\xd8", [0x106b] = "\x82\xd9",
-  [0x106c] = "\x82\xda", [0x106d] = "\x82\xdb", [0x106e] = "\x82\xdc",
-  [0x106f] = "\x82\xdd", [0x1070] = "\x82\xde", [0x1071] = "\x82\xdf",
-  [0x1072] = "\x82\xe0", [0x1073] = "\x82\xe1", [0x1074] = "\x82\xe2",
-  [0x1075] = "\x82\xe3", [0x1076] = "\x82\xe4", [0x1077] = "\x82\xe5",
-  [0x1078] = "\x82\xe6", [0x1079] = "\x82\xe7", [0x107a] = "\x82\xe8",
-  [0x107b] = "\x82\xe9", [0x107c] = "\x82\xea", [0x107d] = "\x82\xeb",
-  [0x107e] = "\x82\xec", [0x107f] = "\x82\xed", [0x1080] = "\x82\xee",
-  [0x1081] = "\x82\xef", [0x1082] = "\x82\xf0", [0x1083] = "\x82\xf1",
-  [0x108b] = "\x81\x4a", [0x108c] = "\x81\x4b", [0x108d] = "\x81\x54",
-  [0x108e] = "\x81\x55", [0x1091] = "\x83\x40", [0x1092] = "\x83\x41",
-  [0x1093] = "\x83\x42", [0x1094] = "\x83\x43", [0x1095] = "\x83\x44",
-  [0x1096] = "\x83\x45", [0x1097] = "\x83\x46", [0x1098] = "\x83\x47",
-  [0x1099] = "\x83\x48", [0x109a] = "\x83\x49", [0x109b] = "\x83\x4a",
-  [0x109c] = "\x83\x4b", [0x109d] = "\x83\x4c", [0x109e] = "\x83\x4d",
-  [0x109f] = "\x83\x4e", [0x10a0] = "\x83\x4f", [0x10a1] = "\x83\x50",
-  [0x10a2] = "\x83\x51", [0x10a3] = "\x83\x52", [0x10a4] = "\x83\x53",
-  [0x10a5] = "\x83\x54", [0x10a6] = "\x83\x55", [0x10a7] = "\x83\x56",
-  [0x10a8] = "\x83\x57", [0x10a9] = "\x83\x58", [0x10aa] = "\x83\x59",
-  [0x10ab] = "\x83\x5a", [0x10ac] = "\x83\x5b", [0x10ad] = "\x83\x5c",
-  [0x10ae] = "\x83\x5d", [0x10af] = "\x83\x5e", [0x10b0] = "\x83\x5f",
-  [0x10b1] = "\x83\x60", [0x10b2] = "\x83\x61", [0x10b3] = "\x83\x62",
-  [0x10b4] = "\x83\x63", [0x10b5] = "\x83\x64", [0x10b6] = "\x83\x65",
-  [0x10b7] = "\x83\x66", [0x10b8] = "\x83\x67", [0x10b9] = "\x83\x68",
-  [0x10ba] = "\x83\x69", [0x10bb] = "\x83\x6a", [0x10bc] = "\x83\x6b",
-  [0x10bd] = "\x83\x6c", [0x10be] = "\x83\x6d", [0x10bf] = "\x83\x6e",
-  [0x10c0] = "\x83\x6f", [0x10c1] = "\x83\x70", [0x10c2] = "\x83\x71",
-  [0x10c3] = "\x83\x72", [0x10c4] = "\x83\x73", [0x10c5] = "\x83\x74",
-  [0x10c6] = "\x83\x75", [0x10c7] = "\x83\x76", [0x10c8] = "\x83\x77",
-  [0x10c9] = "\x83\x78", [0x10ca] = "\x83\x79", [0x10cb] = "\x83\x7a",
-  [0x10cc] = "\x83\x7b", [0x10cd] = "\x83\x7c", [0x10ce] = "\x83\x7d",
-  [0x10cf] = "\x83\x7e", [0x10d0] = "\x83\x80", [0x10d1] = "\x83\x81",
-  [0x10d2] = "\x83\x82", [0x10d3] = "\x83\x83", [0x10d4] = "\x83\x84",
-  [0x10d5] = "\x83\x85", [0x10d6] = "\x83\x86", [0x10d7] = "\x83\x87",
-  [0x10d8] = "\x83\x88", [0x10d9] = "\x83\x89", [0x10da] = "\x83\x8a",
-  [0x10db] = "\x83\x8b", [0x10dc] = "\x83\x8c", [0x10dd] = "\x83\x8d",
-  [0x10de] = "\x83\x8e", [0x10df] = "\x83\x8f", [0x10e0] = "\x83\x90",
-  [0x10e1] = "\x83\x91", [0x10e2] = "\x83\x92", [0x10e3] = "\x83\x93",
-  [0x10e4] = "\x83\x94", [0x10e5] = "\x83\x95", [0x10e6] = "\x83\x96",
-  [0x10eb] = "\x81\x45", [0x10ec] = "\x81\x5b", [0x10ed] = "\x81\x52",
-  [0x10ee] = "\x81\x53", [0x2df0] = "\x88\xea", [0x2df1] = "\x92\x9a",
-  [0x2df3] = "\x8e\xb5", [0x2df7] = "\x96\x9c", [0x2df8] = "\x8f\xe4",
-  [0x2df9] = "\x8e\x4f", [0x2dfa] = "\x8f\xe3", [0x2dfb] = "\x89\xba",
-  [0x2dfd] = "\x95\x73", [0x2dfe] = "\x97\x5e", [0x2e00] = "\x98\xa0",
-  [0x2e01] = "\x89\x4e", [0x2e04] = "\x8a\x8e", [0x2e05] = "\x98\xa1",
-  [0x2e06] = "\x90\xa2", [0x2e07] = "\x99\xc0", [0x2e08] = "\x8b\x75",
-  [0x2e09] = "\x95\xb8", [0x2e0e] = "\x8f\xe5", [0x2e11] = "\x97\xbc",
-  [0x2e16] = "\x95\xc0", [0x2e1a] = "\x98\xa2", [0x2e1d] = "\x92\x86",
-  [0x2e21] = "\x98\xa3", [0x2e22] = "\x8b\xf8", [0x2e26] = "\x98\xa4",
-  [0x2e28] = "\x8a\xdb", [0x2e29] = "\x92\x4f", [0x2e2b] = "\x8e\xe5",
-  [0x2e2c] = "\x98\xa5", [0x2e2f] = "\x98\xa6", [0x2e32] = "\x98\xa7",
-  [0x2e33] = "\x94\x54", [0x2e35] = "\x8b\x76", [0x2e3b] = "\x94\x56",
-  [0x2e3d] = "\x93\xe1", [0x2e3e] = "\x8c\xc1", [0x2e3f] = "\x96\x52",
-  [0x2e45] = "\xe5\x68", [0x2e46] = "\x98\xa8", [0x2e47] = "\x8f\xe6",
-  [0x2e48] = "\x98\xa9", [0x2e49] = "\x89\xb3", [0x2e4d] = "\x8b\xe3",
-  [0x2e4e] = "\x8c\xee", [0x2e4f] = "\x96\xe7", [0x2e52] = "\x9b\xa4",
-  [0x2e61] = "\x97\x90", [0x2e63] = "\x93\xfb", [0x2e6e] = "\x8a\xa3",
-  [0x2e70] = "\x8b\x54", [0x2e72] = "\x98\xaa", [0x2e75] = "\x98\xab",
-  [0x2e76] = "\x97\xb9", [0x2e78] = "\x97\x5c", [0x2e79] = "\x91\x88",
-  [0x2e7a] = "\x98\xad", [0x2e7b] = "\x8e\x96", [0x2e7c] = "\x93\xf1",
-  [0x2e7e] = "\x98\xb0", [0x2e81] = "\x89\x5d", [0x2e82] = "\x8c\xdd",
-  [0x2e84] = "\x8c\xdc", [0x2e85] = "\x88\xe4", [0x2e88] = "\x98\x6a",
-  [0x2e89] = "\x98\x69", [0x2e8b] = "\x8d\xb1", [0x2e8c] = "\x88\x9f",
-  [0x2e8e] = "\x98\xb1", [0x2e8f] = "\x98\xb2", [0x2e90] = "\x98\xb3",
-  [0x2e91] = "\x96\x53", [0x2e92] = "\x98\xb4", [0x2e94] = "\x8c\xf0",
-  [0x2e95] = "\x88\xe5", [0x2e96] = "\x96\x92", [0x2e98] = "\x8b\x9c",
-  [0x2e9b] = "\x8b\x9d", [0x2e9c] = "\x8b\x9e", [0x2e9d] = "\x92\xe0",
-  [0x2e9e] = "\x97\xba", [0x2ea0] = "\x98\xb5", [0x2ea3] = "\x98\xb6",
-  [0x2ea6] = "\x98\xb7", [0x2eaa] = "\x90\x6c", [0x2eb0] = "\x8f\x59",
-  [0x2eb1] = "\x90\x6d", [0x2eb2] = "\x98\xbc", [0x2eb4] = "\x98\xba",
-  [0x2eb6] = "\x98\xbb", [0x2eb7] = "\x8b\x77", [0x2eba] = "\x8d\xa1",
-  [0x2ebb] = "\x89\xee", [0x2ebd] = "\x98\xb9", [0x2ebe] = "\x98\xb8",
-  [0x2ebf] = "\x95\xa7", [0x2ec4] = "\x8e\x65", [0x2ec5] = "\x8e\x64",
-  [0x2ec6] = "\x91\xbc", [0x2ec7] = "\x98\xbd", [0x2ec8] = "\x95\x74",
-  [0x2ec9] = "\x90\xe5", [0x2ecd] = "\x81\x57", [0x2ece] = "\x98\xbe",
-  [0x2ecf] = "\x98\xc0", [0x2ed3] = "\x91\xe3", [0x2ed4] = "\x97\xdf",
-  [0x2ed5] = "\x88\xc8", [0x2edd] = "\x98\xbf", [0x2ede] = "\x89\xbc",
-  [0x2ee0] = "\x8b\xc2", [0x2ee2] = "\x92\x87", [0x2ee6] = "\x8c\x8f",
-  [0x2ee7] = "\x98\xc1", [0x2eeb] = "\x94\x43", [0x2ef1] = "\x8a\xe9",
-  [0x2ef9] = "\x98\xc2", [0x2efa] = "\x88\xc9", [0x2efd] = "\x8c\xde",
-  [0x2efe] = "\x8a\xea", [0x2eff] = "\x95\x9a", [0x2f00] = "\x94\xb0",
-  [0x2f01] = "\x8b\x78", [0x2f0a] = "\x89\xef", [0x2f0c] = "\x98\xe5",
-  [0x2f0d] = "\x93\x60", [0x2f1f] = "\x94\x8c", [0x2f20] = "\x98\xc4",
-  [0x2f24] = "\x94\xba", [0x2f26] = "\x97\xe0", [0x2f28] = "\x90\x4c",
-  [0x2f2a] = "\x8e\x66", [0x2f2c] = "\x8e\x97", [0x2f2d] = "\x89\xbe",
-  [0x2f33] = "\x92\xcf", [0x2f36] = "\x92\x41", [0x2f37] = "\x98\xc8",
-  [0x2f3d] = "\x88\xca", [0x2f3e] = "\x92\xe1", [0x2f3f] = "\x8f\x5a",
-  [0x2f40] = "\x8d\xb2", [0x2f41] = "\x97\x43", [0x2f43] = "\x91\xcc",
-  [0x2f45] = "\x89\xbd", [0x2f47] = "\x98\xc7", [0x2f49] = "\x97\x5d",
-  [0x2f4a] = "\x98\xc3", [0x2f4b] = "\x98\xc5", [0x2f4c] = "\x8d\xec",
-  [0x2f4d] = "\x98\xc6", [0x2f4e] = "\x9b\x43", [0x2f59] = "\x98\xce",
-  [0x2f5f] = "\x98\xd1", [0x2f60] = "\x98\xcf", [0x2f63] = "\x89\xc0",
-  [0x2f65] = "\x95\xb9", [0x2f66] = "\x98\xc9", [0x2f6b] = "\x98\xcd",
-  [0x2f6c] = "\x8c\xf1", [0x2f6f] = "\x8e\x67", [0x2f73] = "\x8a\xa4",
-  [0x2f76] = "\x98\xd2", [0x2f78] = "\x98\xca", [0x2f7b] = "\x97\xe1",
-  [0x2f7d] = "\x8e\x98", [0x2f7f] = "\x98\xcb", [0x2f81] = "\x98\xd0",
-  [0x2f86] = "\x98\xd3", [0x2f88] = "\x98\xcc", [0x2f8b] = "\x8b\x9f",
-  [0x2f8d] = "\x88\xcb", [0x2f90] = "\x8b\xa0", [0x2f91] = "\x89\xbf",
-  [0x2f9b] = "\x9b\x44", [0x2f9d] = "\x96\x99", [0x2f9e] = "\x95\x8e",
-  [0x2f9f] = "\x8c\xf2", [0x2fa5] = "\x90\x4e", [0x2fa6] = "\x97\xb5",
-  [0x2faf] = "\x95\xd6", [0x2fb2] = "\x8c\x57", [0x2fb3] = "\x91\xa3",
-  [0x2fb4] = "\x89\xe2", [0x2fba] = "\x8f\x72", [0x2fbe] = "\x98\xd7",
-  [0x2fc0] = "\x98\xdc", [0x2fc1] = "\x98\xda", [0x2fc4] = "\x98\xd5",
-  [0x2fc7] = "\x91\xad", [0x2fc8] = "\x98\xd8", [0x2fca] = "\x98\xdb",
-  [0x2fcb] = "\x98\xd9", [0x2fcd] = "\x95\xdb", [0x2fcf] = "\x98\xd6",
-  [0x2fd1] = "\x90\x4d", [0x2fd3] = "\x96\x93", [0x2fd4] = "\x98\xdd",
-  [0x2fd5] = "\x98\xde", [0x2fde] = "\x8f\x43", [0x2fdf] = "\x98\xeb",
-  [0x2fe3] = "\x94\x6f", [0x2fe5] = "\x95\x55", [0x2fe6] = "\x98\xe6",
-  [0x2fe8] = "\x95\xee", [0x2fea] = "\x89\xb4", [0x2fee] = "\x98\xea",
-  [0x2ff5] = "\x98\xe4", [0x2ff6] = "\x98\xed", [0x2ff9] = "\x91\x71",
-  [0x2ffb] = "\x8c\xc2", [0x2ffd] = "\x94\x7b", [0x2fff] = "\xe0\xc5",
-  [0x3001] = "\x98\xec", [0x3002] = "\x93\x7c", [0x3004] = "\x98\xe1",
-  [0x3006] = "\x8c\xf4", [0x3009] = "\x8c\xf3", [0x300a] = "\x98\xdf",
-  [0x300f] = "\x8e\xd8", [0x3011] = "\x98\xe7", [0x3013] = "\x95\xed",
-  [0x3014] = "\x92\x6c", [0x3015] = "\x98\xe3", [0x3016] = "\x8c\x91",
-  [0x3018] = "\x98\xe0", [0x3019] = "\x98\xe8", [0x301a] = "\x98\xe2",
-  [0x301b] = "\x97\xcf", [0x301c] = "\x98\xe9", [0x301d] = "\x98\x60",
-  [0x3026] = "\x8b\xe4", [0x3029] = "\x8c\x90", [0x3033] = "\x98\xee",
-  [0x3037] = "\x98\xef", [0x3038] = "\x98\xf3", [0x3039] = "\x88\xcc",
-  [0x303f] = "\x95\xce", [0x3040] = "\x98\xf2", [0x3045] = "\x98\xf1",
-  [0x3046] = "\x98\xf5", [0x304a] = "\x98\xf4", [0x304c] = "\x92\xe2",
-  [0x3055] = "\x8c\x92", [0x305c] = "\x98\xf6", [0x3062] = "\x8e\xc3",
-  [0x3064] = "\x91\xa4", [0x3065] = "\x92\xe3", [0x3066] = "\x8b\xf4",
-  [0x3068] = "\x98\xf7", [0x306d] = "\x8b\x55", [0x3070] = "\x98\xf8",
-  [0x3075] = "\x98\xfa", [0x307d] = "\x96\x54", [0x3081] = "\x8c\x86",
-  [0x3088] = "\x8e\x50", [0x3089] = "\x94\xf5", [0x308a] = "\x98\xf9",
-  [0x309c] = "\x8d\xc3", [0x309d] = "\x97\x62", [0x30a2] = "\x98\xfc",
-  [0x30a3] = "\x99\x42", [0x30a4] = "\x98\xfb", [0x30a5] = "\x8d\xc2",
-  [0x30a7] = "\x8f\x9d", [0x30ae] = "\x8c\x58", [0x30b2] = "\x99\x43",
-  [0x30b5] = "\x8b\xcd", [0x30b9] = "\x99\x40", [0x30ba] = "\x99\x41",
-  [0x30bd] = "\x93\xad", [0x30bf] = "\x91\x9c", [0x30c1] = "\x8b\xa1",
-  [0x30c5] = "\x96\x6c", [0x30c6] = "\x99\x44", [0x30ca] = "\x97\xbb",
-  [0x30ce] = "\x99\x45", [0x30d3] = "\x99\x48", [0x30d5] = "\x99\x46",
-  [0x30d7] = "\x91\x6d", [0x30dd] = "\x99\x47", [0x30de] = "\x99\x49",
-  [0x30e5] = "\x99\x4b", [0x30e9] = "\x99\x4a", [0x30eb] = "\x95\xc6",
-  [0x30f0] = "\x8b\x56", [0x30f1] = "\x99\x4d", [0x30f2] = "\x99\x4e",
-  [0x30f4] = "\x89\xad", [0x30f9] = "\x99\x4c", [0x3102] = "\x8e\xf2",
-  [0x3104] = "\x99\x51", [0x3105] = "\x99\x50", [0x3106] = "\x99\x4f",
-  [0x3108] = "\x98\xd4", [0x310a] = "\x99\x52", [0x310f] = "\x8f\x9e",
-  [0x3111] = "\x99\x53", [0x311a] = "\x97\x44", [0x3122] = "\x96\xd7",
-  [0x3127] = "\x99\x55", [0x312a] = "\x99\x54", [0x312b] = "\x99\x57",
-  [0x312c] = "\x99\x56", [0x312f] = "\x99\x58", [0x3130] = "\x99\x59",
-  [0x3131] = "\x88\xf2", [0x3133] = "\x8c\xb3", [0x3134] = "\x8c\x5a",
-  [0x3135] = "\x8f\x5b", [0x3136] = "\x92\x9b", [0x3137] = "\x8b\xa2",
-  [0x3138] = "\x90\xe6", [0x3139] = "\x8c\xf5", [0x313b] = "\x8d\x8e",
-  [0x313c] = "\x99\x5b", [0x313d] = "\x96\xc6", [0x313e] = "\x93\x65",
-  [0x3140] = "\x8e\x99", [0x3142] = "\x99\x5a", [0x3144] = "\x99\x5c",
-  [0x314a] = "\x93\x7d", [0x314c] = "\x8a\x95", [0x3152] = "\x99\x5d",
-  [0x3155] = "\x93\xfc", [0x3158] = "\x91\x53", [0x3159] = "\x99\x5f",
-  [0x315a] = "\x99\x60", [0x315b] = "\x94\xaa", [0x315c] = "\x8c\xf6",
-  [0x315d] = "\x98\x5a", [0x315e] = "\x99\x61", [0x3161] = "\x8b\xa4",
-  [0x3165] = "\x95\xba", [0x3166] = "\x91\xb4", [0x3167] = "\x8b\xef",
-  [0x3168] = "\x93\x54", [0x316c] = "\x8c\x93", [0x3170] = "\x99\x62",
-  [0x3172] = "\x99\x63", [0x3175] = "\x93\xe0", [0x3176] = "\x89\x7e",
-  [0x3179] = "\x99\x66", [0x317a] = "\x8d\xfb", [0x317c] = "\x99\x65",
-  [0x317d] = "\x8d\xc4", [0x317f] = "\x99\x67", [0x3180] = "\xe3\xec",
-  [0x3181] = "\x99\x68", [0x3182] = "\x96\x60", [0x3183] = "\x99\x69",
-  [0x3185] = "\x99\x6a", [0x3186] = "\x99\x6b", [0x3187] = "\x8f\xe7",
-  [0x3189] = "\x8e\xca", [0x3190] = "\x8a\xa5", [0x3192] = "\x99\x6e",
-  [0x3194] = "\x99\x6c", [0x3195] = "\x96\xbb", [0x3196] = "\x99\x6d",
-  [0x3198] = "\x95\x79", [0x3199] = "\x99\x6f", [0x319a] = "\x99\x70",
-  [0x319b] = "\x99\x71", [0x319c] = "\x93\x7e", [0x31a0] = "\x99\x75",
-  [0x31a1] = "\x99\x73", [0x31a2] = "\x99\x74", [0x31a3] = "\x99\x72",
-  [0x31a4] = "\x8d\xe1", [0x31a5] = "\x99\x76", [0x31a6] = "\x96\xe8",
-  [0x31a7] = "\x97\xe2", [0x31ad] = "\x99\x77", [0x31b4] = "\x90\xa6",
-  [0x31b5] = "\x99\x78", [0x31b6] = "\x8f\x79", [0x31b9] = "\x99\x79",
-  [0x31bb] = "\x92\x9c", [0x31bc] = "\x97\xbd", [0x31bd] = "\x93\x80",
-  [0x31c6] = "\x99\xc3", [0x31cb] = "\x99\x7a", [0x31cc] = "\xea\xa3",
-  [0x31cd] = "\x8b\xc3", [0x31d0] = "\x99\x7b", [0x31d1] = "\x96\x7d",
-  [0x31d6] = "\x8f\x88", [0x31d7] = "\x91\xfa", [0x31d9] = "\x99\x7d",
-  [0x31da] = "\x93\xe2", [0x31dd] = "\x99\x7e", [0x31e0] = "\x99\x80",
-  [0x31e1] = "\x8a\x4d", [0x31e5] = "\x99\x81", [0x31e6] = "\x8b\xa5",
-  [0x31e8] = "\x93\xca", [0x31e9] = "\x89\x9a", [0x31ea] = "\x8f\x6f",
-  [0x31ed] = "\x94\x9f", [0x31ee] = "\x99\x82", [0x31f0] = "\x93\x81",
-  [0x31f3] = "\x90\x6e", [0x31f4] = "\x99\x83", [0x31f6] = "\x95\xaa",
-  [0x31f7] = "\x90\xd8", [0x31f8] = "\x8a\xa0", [0x31fa] = "\x8a\xa7",
-  [0x31fb] = "\x99\x84", [0x31fe] = "\x99\x86", [0x3201] = "\x8c\x59",
-  [0x3204] = "\x99\x85", [0x3207] = "\x97\xf1", [0x320d] = "\x8f\x89",
-  [0x3214] = "\x94\xbb", [0x3215] = "\x95\xca", [0x3217] = "\x99\x87",
-  [0x3219] = "\x97\x98", [0x321a] = "\x99\x88", [0x321e] = "\x99\x89",
-  [0x3220] = "\x93\x9e", [0x3223] = "\x99\x8a", [0x3226] = "\x90\xa7",
-  [0x3227] = "\x8d\xfc", [0x3228] = "\x8c\x94", [0x3229] = "\x99\x8b",
-  [0x322a] = "\x8e\x68", [0x322b] = "\x8d\x8f", [0x3233] = "\x92\xe4",
-  [0x3234] = "\x99\x8d", [0x3237] = "\x91\xa5", [0x323a] = "\x8d\xed",
-  [0x323b] = "\x99\x8e", [0x323c] = "\x99\x8f", [0x323d] = "\x91\x4f",
-  [0x323f] = "\x99\x8c", [0x3244] = "\x99\x91", [0x3246] = "\x96\x55",
-  [0x324b] = "\x8d\x84", [0x324e] = "\x99\x90", [0x3253] = "\x8c\x95",
-  [0x3254] = "\x8d\xdc", [0x3255] = "\x94\x8d", [0x3259] = "\x99\x94",
-  [0x325a] = "\x99\x92", [0x325f] = "\x95\x9b", [0x3260] = "\x8f\xe8",
-  [0x3261] = "\x99\x9b", [0x3262] = "\x8a\x84", [0x3263] = "\x99\x95",
-  [0x3264] = "\x99\x93", [0x3265] = "\x91\x6e", [0x326d] = "\x99\x97",
-  [0x326f] = "\x99\x96", [0x3273] = "\x8a\x63", [0x3277] = "\x8c\x80",
-  [0x3278] = "\x99\x9c", [0x3279] = "\x97\xab", [0x327d] = "\x99\x98",
-  [0x3281] = "\x99\x9d", [0x3282] = "\x99\x9a", [0x3284] = "\x99\x99",
-  [0x328b] = "\x97\xcd", [0x328f] = "\x8c\xf7", [0x3290] = "\x89\xc1",
-  [0x3293] = "\x97\xf2", [0x3299] = "\x8f\x95", [0x329a] = "\x93\x77",
-  [0x329b] = "\x8d\x85", [0x329c] = "\x99\xa0", [0x329d] = "\x99\xa1",
-  [0x32a1] = "\x97\xe3", [0x32a4] = "\x98\x4a", [0x32a5] = "\x99\xa3",
-  [0x32a9] = "\x8c\xf8", [0x32ac] = "\x99\xa2", [0x32ae] = "\x8a\x4e",
-  [0x32b1] = "\x99\xa4", [0x32b3] = "\x96\x75", [0x32b5] = "\x92\xba",
-  [0x32b7] = "\x97\x45", [0x32b9] = "\x95\xd7", [0x32bd] = "\x99\xa5",
-  [0x32c2] = "\xe8\xd3", [0x32c5] = "\x93\xae", [0x32c7] = "\x99\xa6",
-  [0x32c8] = "\x8a\xa8", [0x32c9] = "\x96\xb1", [0x32cd] = "\x8f\x9f",
-  [0x32ce] = "\x99\xa7", [0x32cf] = "\x95\xe5", [0x32d0] = "\x99\xab",
-  [0x32d2] = "\x90\xa8", [0x32d3] = "\x99\xa8", [0x32d4] = "\x8b\xce",
-  [0x32d6] = "\x99\xa9", [0x32d7] = "\x8a\xa9", [0x32e2] = "\x8c\x4d",
-  [0x32e3] = "\x99\xac", [0x32e5] = "\x99\xad", [0x32e8] = "\x99\xae",
-  [0x32e9] = "\x99\xaf", [0x32ea] = "\x8e\xd9", [0x32ee] = "\x8c\xf9",
-  [0x32ef] = "\x96\xdc", [0x32f1] = "\x96\xe6", [0x32f2] = "\x93\xf5",
-  [0x32f5] = "\x95\xef", [0x32f6] = "\x99\xb0", [0x32f8] = "\x99\xb1",
-  [0x32fd] = "\x99\xb3", [0x32ff] = "\x99\xb5", [0x3300] = "\x99\xb4",
-  [0x3305] = "\x99\xb6", [0x3306] = "\x89\xbb", [0x3307] = "\x96\x6b",
-  [0x3309] = "\x8d\xfa", [0x330a] = "\x99\xb7", [0x330d] = "\x91\x78",
-  [0x3310] = "\x8f\xa0", [0x3311] = "\x8b\xa7", [0x3313] = "\x99\xb8",
-  [0x331a] = "\x94\xd9", [0x331f] = "\x99\xb9", [0x3321] = "\x99\xba",
-  [0x3323] = "\x99\xbb", [0x3328] = "\x99\xbc", [0x3329] = "\x95\x43",
-  [0x332a] = "\x8b\xe6", [0x332b] = "\x88\xe3", [0x332f] = "\x93\xbd",
-  [0x3330] = "\x99\xbd", [0x3331] = "\x8f\x5c", [0x3333] = "\x90\xe7",
-  [0x3335] = "\x99\xbf", [0x3336] = "\x99\xbe", [0x3337] = "\x8f\xa1",
-  [0x3338] = "\x8c\xdf", [0x3339] = "\x99\xc1", [0x333a] = "\x94\xbc",
-  [0x333d] = "\x99\xc2", [0x3341] = "\x94\xda", [0x3342] = "\x91\xb2",
-  [0x3343] = "\x91\xec", [0x3344] = "\x8b\xa6", [0x3347] = "\x93\xec",
-  [0x3348] = "\x92\x50", [0x334a] = "\x94\x8e", [0x334c] = "\x96\x6d",
-  [0x334e] = "\x99\xc4", [0x3350] = "\x90\xe8", [0x3356] = "\x8c\x54",
-  [0x3359] = "\x99\xc5", [0x335e] = "\x99\xc6", [0x335f] = "\x89\x4b",
-  [0x3360] = "\x88\xf3", [0x3361] = "\x8a\xeb", [0x3363] = "\x91\xa6",
-  [0x3364] = "\x8b\x70", [0x3365] = "\x97\x91", [0x3367] = "\x99\xc9",
-  [0x3368] = "\x89\xb5", [0x336b] = "\x99\xc8", [0x336f] = "\x8b\xa8",
-  [0x3372] = "\x99\xca", [0x3374] = "\x96\xef", [0x3386] = "\x99\xcb",
-  [0x3388] = "\x97\xd0", [0x338a] = "\x8c\xfa", [0x338f] = "\x8c\xb4",
-  [0x3390] = "\x99\xcc", [0x3395] = "\x99\xce", [0x3396] = "\x99\xcd",
-  [0x3398] = "\x90\x7e", [0x3399] = "\x89\x58", [0x339d] = "\x89\x7d",
-  [0x339e] = "\x99\xcf", [0x33a0] = "\x99\xd0", [0x33a3] = "\x8c\xb5",
-  [0x33a6] = "\x99\xd1", [0x33ab] = "\x8b\x8e", [0x33b2] = "\x8e\x51",
-  [0x33b3] = "\x99\xd2", [0x33b8] = "\x96\x94", [0x33b9] = "\x8d\xb3",
-  [0x33ba] = "\x8b\x79", [0x33bb] = "\x97\x46", [0x33bc] = "\x91\x6f",
-  [0x33bd] = "\x94\xbd", [0x33be] = "\x8e\xfb", [0x33c4] = "\x8f\x66",
-  [0x33c6] = "\x8e\xe6", [0x33c7] = "\x8e\xf3", [0x33c9] = "\x8f\x96",
-  [0x33cb] = "\x94\xbe", [0x33cf] = "\x99\xd5", [0x33d1] = "\x89\x62",
-  [0x33d2] = "\x91\x70", [0x33d3] = "\x8c\xfb", [0x33d4] = "\x8c\xc3",
-  [0x33d5] = "\x8b\xe5", [0x33d8] = "\x99\xd9", [0x33d9] = "\x92\x40",
-  [0x33da] = "\x91\xfc", [0x33db] = "\x8b\xa9", [0x33dc] = "\x8f\xa2",
-  [0x33dd] = "\x99\xda", [0x33de] = "\x99\xd8", [0x33df] = "\x89\xc2",
-  [0x33e0] = "\x91\xe4", [0x33e1] = "\x8e\xb6", [0x33e2] = "\x8e\x6a",
-  [0x33e3] = "\x89\x45", [0x33e6] = "\x8a\x90", [0x33e7] = "\x8d\x86",
-  [0x33e8] = "\x8e\x69", [0x33ea] = "\x99\xdb", [0x33f1] = "\x99\xdc",
-  [0x33f3] = "\x8b\x68", [0x33f4] = "\x8a\x65", [0x33f8] = "\x8d\x87",
-  [0x33f9] = "\x8b\x67", [0x33fa] = "\x92\xdd", [0x33fb] = "\x89\x44",
-  [0x33fc] = "\x93\xaf", [0x33fd] = "\x96\xbc", [0x33fe] = "\x8d\x40",
-  [0x33ff] = "\x97\x99", [0x3400] = "\x93\x66", [0x3401] = "\x8c\xfc",
-  [0x340b] = "\x8c\x4e", [0x340d] = "\x99\xe5", [0x340f] = "\x8b\xe1",
-  [0x3410] = "\x96\x69", [0x3416] = "\x94\xdb", [0x3419] = "\x99\xe4",
-  [0x341b] = "\x8a\xdc", [0x341c] = "\x99\xdf", [0x341d] = "\x99\xe0",
-  [0x341e] = "\x99\xe2", [0x3426] = "\x99\xe3", [0x3428] = "\x8b\x7a",
-  [0x3429] = "\x90\x81", [0x342b] = "\x95\xab", [0x342c] = "\x99\xe1",
-  [0x342d] = "\x99\xdd", [0x342e] = "\x8c\xe1", [0x3430] = "\x99\xde",
-  [0x3432] = "\x98\x43", [0x3436] = "\x95\xf0", [0x3438] = "\x92\xe6",
-  [0x3439] = "\x8c\xe0", [0x343a] = "\x8d\x90", [0x343e] = "\x99\xe6",
-  [0x3441] = "\x93\xdb", [0x344f] = "\x99\xea", [0x3458] = "\x8e\xfc",
-  [0x345a] = "\x8e\xf4", [0x3460] = "\x99\xed", [0x3461] = "\x99\xeb",
-  [0x3463] = "\x96\xa1", [0x3465] = "\x99\xe8", [0x3466] = "\x99\xf1",
-  [0x3467] = "\x99\xec", [0x346b] = "\x99\xef", [0x346c] = "\x8c\xc4",
-  [0x346d] = "\x96\xbd", [0x3470] = "\x99\xf0", [0x3474] = "\x99\xf2",
-  [0x3476] = "\x99\xf4", [0x347b] = "\x8d\xee", [0x347c] = "\x98\x61",
-  [0x347e] = "\x99\xe9", [0x347f] = "\x99\xe7", [0x3480] = "\x99\xf3",
-  [0x3482] = "\x99\xee", [0x3492] = "\x99\xf6", [0x3494] = "\x9a\x42",
-  [0x3495] = "\x99\xf8", [0x3498] = "\x99\xfc", [0x349b] = "\x9a\x40",
-  [0x349c] = "\x99\xf9", [0x349f] = "\x9a\x5d", [0x34a2] = "\x8d\xe7",
-  [0x34a3] = "\x8a\x50", [0x34a8] = "\x99\xf7", [0x34ac] = "\x9a\x44",
-  [0x34ad] = "\x88\xf4", [0x34ae] = "\x9a\x43", [0x34b0] = "\x88\xa3",
-  [0x34b1] = "\x95\x69", [0x34b2] = "\x9a\x41", [0x34b4] = "\x99\xfa",
-  [0x34b7] = "\x99\xf5", [0x34b8] = "\x99\xfb", [0x34b9] = "\x8d\xc6",
-  [0x34c8] = "\x9a\x45", [0x34d1] = "\x88\xf5", [0x34d2] = "\x9a\x4e",
-  [0x34d5] = "\x9a\x46", [0x34d6] = "\x9a\x47", [0x34d8] = "\x8f\xa3",
-  [0x34d9] = "\x96\x89", [0x34dd] = "\x9a\x4c", [0x34de] = "\x9a\x4b",
-  [0x34e2] = "\x93\x4e", [0x34ea] = "\x9a\x4d", [0x34ed] = "\x9a\x4a",
-  [0x34f4] = "\x89\x53", [0x34f6] = "\x8d\xb4", [0x34f7] = "\x90\x4f",
-  [0x34ff] = "\x9a\x48", [0x3500] = "\x93\x82", [0x3504] = "\x9a\x49",
-  [0x3506] = "\x88\xa0", [0x351e] = "\x9a\x53", [0x351f] = "\x97\x42",
-  [0x3521] = "\x8f\xa5", [0x3523] = "\x9a\x59", [0x3528] = "\x9a\x58",
-  [0x3529] = "\x9a\x4f", [0x352e] = "\x91\xc1", [0x3530] = "\x9a\x50",
-  [0x3534] = "\x91\xed", [0x3535] = "\x9a\x55", [0x3536] = "\x8f\xa4",
-  [0x353c] = "\x9a\x52", [0x353f] = "\x96\xe2", [0x3543] = "\x8c\x5b",
-  [0x3546] = "\x9a\x56", [0x3547] = "\x9a\x57", [0x354c] = "\x9a\x54",
-  [0x354d] = "\x9a\x5a", [0x3553] = "\x9a\x51", [0x356b] = "\x9a\x60",
-  [0x356c] = "\x9a\x65", [0x356e] = "\x9a\x61", [0x3570] = "\x9a\x5c",
-  [0x3573] = "\x9a\x66", [0x3574] = "\x91\x50", [0x3577] = "\x9a\x68",
-  [0x3579] = "\x8d\x41", [0x357a] = "\x9a\x5e", [0x357b] = "\x92\x9d",
-  [0x3588] = "\x9a\x62", [0x3589] = "\x9a\x5b", [0x358a] = "\x8a\xab",
-  [0x358c] = "\x8a\xec", [0x358d] = "\x8a\x85", [0x358e] = "\x9a\x63",
-  [0x358f] = "\x9a\x5f", [0x3597] = "\x8c\x96", [0x3598] = "\x9a\x69",
-  [0x3599] = "\x9a\x67", [0x359a] = "\x91\x72", [0x359b] = "\x8b\x69",
-  [0x359c] = "\x8b\xaa", [0x359e] = "\x9a\x64", [0x35a0] = "\x8b\xf2",
-  [0x35a6] = "\x89\x63", [0x35b4] = "\x9a\x6d", [0x35b5] = "\x9a\x6b",
-  [0x35b7] = "\x9a\xa5", [0x35c4] = "\x9a\x70", [0x35ca] = "\x9a\x6a",
-  [0x35cc] = "\x9a\x6e", [0x35cf] = "\x9a\x6c", [0x35d3] = "\x8e\x6b",
-  [0x35d4] = "\x9a\x6f", [0x35e7] = "\x9a\x72", [0x35e9] = "\x9a\x77",
-  [0x35ed] = "\x9a\x75", [0x35ee] = "\x9a\x74", [0x35f6] = "\x92\x51",
-  [0x35f9] = "\x89\xc3", [0x3604] = "\x9a\x71", [0x3606] = "\x9a\x73",
-  [0x3607] = "\x8f\xa6", [0x3608] = "\x89\x52", [0x360b] = "\x9a\x76",
-  [0x3619] = "\x89\xdc", [0x361f] = "\x9a\x82", [0x3621] = "\x8f\xfa",
-  [0x3622] = "\x9a\x7d", [0x3624] = "\x9a\x7b", [0x3626] = "\x9a\x7c",
-  [0x3628] = "\x9a\x7e", [0x3632] = "\x89\x5c", [0x363c] = "\x91\x58",
-  [0x363e] = "\x9a\x78", [0x3640] = "\x9a\x79", [0x364b] = "\x8a\x9a",
-  [0x3654] = "\x9a\x81", [0x3658] = "\x8a\xed", [0x365a] = "\x9a\x84",
-  [0x365b] = "\x9a\x80", [0x365c] = "\x9a\x83", [0x3664] = "\x95\xac",
-  [0x3668] = "\x93\xd3", [0x366a] = "\x94\xb6", [0x3670] = "\x9a\x86",
-  [0x3676] = "\x9a\x85", [0x3677] = "\x8a\x64", [0x367a] = "\x9a\x87",
-  [0x367f] = "\x9a\x8a", [0x3684] = "\x9a\x89", [0x3690] = "\x9a\x88",
-  [0x3692] = "\x94\x58", [0x3695] = "\x9a\x8b", [0x369e] = "\x9a\x8c",
-  [0x36a4] = "\x9a\x8e", [0x36a6] = "\x9a\x8d", [0x36ac] = "\x9a\x90",
-  [0x36b0] = "\x9a\x93", [0x36b1] = "\x9a\x91", [0x36b2] = "\x9a\x8f",
-  [0x36b3] = "\x9a\x92", [0x36b8] = "\x9a\x94", [0x36be] = "\x9a\x95",
-  [0x36c1] = "\x9a\x96", [0x36c3] = "\x9a\x97", [0x36c7] = "\x9a\x98",
-  [0x36c8] = "\x99\x64", [0x36ca] = "\x8e\xfa", [0x36cb] = "\x8e\x6c",
-  [0x36ce] = "\x89\xf1", [0x36d0] = "\x88\xf6", [0x36d3] = "\x92\x63",
-  [0x36de] = "\x9a\x99", [0x36e0] = "\x8d\xa2", [0x36e2] = "\x88\xcd",
-  [0x36e3] = "\x90\x7d", [0x36e9] = "\x9a\x9a", [0x36ea] = "\x8c\xc5",
-  [0x36ed] = "\x8d\x91", [0x36ef] = "\x9a\x9c", [0x36f0] = "\x9a\x9b",
-  [0x36f3] = "\x95\xde", [0x36f4] = "\x9a\x9d", [0x36f8] = "\x9a\x9f",
-  [0x36f9] = "\x9a\x9e", [0x36fb] = "\x9a\xa0", [0x36fd] = "\x9a\xa1",
-  [0x36ff] = "\x8c\x97", [0x3702] = "\x89\x80", [0x3703] = "\x9a\xa2",
-  [0x3706] = "\x9a\xa4", [0x3708] = "\x9a\xa3", [0x370c] = "\x9a\xa6",
-  [0x370f] = "\x93\x79", [0x3716] = "\x9a\xa7", [0x3717] = "\x88\xb3",
-  [0x3718] = "\x8d\xdd", [0x371d] = "\x8c\x5c", [0x3720] = "\x92\x6e",
-  [0x3727] = "\x9a\xa8", [0x3728] = "\x9a\xa9", [0x372b] = "\x9a\xab",
-  [0x3730] = "\x9a\xac", [0x3732] = "\x8d\xe2", [0x3737] = "\x8b\xcf",
-  [0x373a] = "\x96\x56", [0x373e] = "\x9a\xaa", [0x373f] = "\x9a\xad",
-  [0x3740] = "\x8d\xbf", [0x3741] = "\x8d\x42", [0x3751] = "\x9a\xb1",
-  [0x3754] = "\x8d\xa3", [0x3756] = "\x92\x52", [0x3759] = "\x9a\xae",
-  [0x375a] = "\x92\xd8", [0x376f] = "\x9a\xb2", [0x3772] = "\x90\x82",
-  [0x3778] = "\x9a\xb0", [0x3779] = "\x9a\xb3", [0x377b] = "\x8c\x5e",
-  [0x3783] = "\x9a\xb4", [0x3790] = "\x9a\xb5", [0x3792] = "\x8d\x43",
-  [0x3793] = "\x8a\x5f", [0x3794] = "\x9a\xb7", [0x379a] = "\x9a\xb8",
-  [0x37a0] = "\x9a\xb9", [0x37a3] = "\x9a\xb6", [0x37b0] = "\x9a\xaf",
-  [0x37b3] = "\x9a\xba", [0x37b6] = "\x9a\xbb", [0x37bb] = "\x96\x84",
-  [0x37be] = "\x8f\xe9", [0x37c2] = "\x9a\xbd", [0x37c3] = "\x9a\xbe",
-  [0x37c4] = "\x9a\xbc", [0x37c6] = "\x9a\xc0", [0x37cc] = "\x94\x57",
-  [0x37cf] = "\x88\xe6", [0x37d0] = "\x95\x75", [0x37d3] = "\x9a\xc1",
-  [0x37e4] = "\x8f\xfb", [0x37e7] = "\x8e\xb7", [0x37e9] = "\x94\x7c",
-  [0x37ea] = "\x8a\xee", [0x37ec] = "\x8d\xe9", [0x37f0] = "\x96\x78",
-  [0x37f2] = "\x93\xb0", [0x37f5] = "\x8c\x98", [0x37f6] = "\x91\xcd",
-  [0x37fa] = "\x9a\xbf", [0x37fb] = "\x9a\xc2", [0x3805] = "\x91\xc2",
-  [0x3809] = "\x9a\xc3", [0x380d] = "\x9a\xc4", [0x3811] = "\x9a\xc6",
-  [0x3814] = "\x92\xe7", [0x381a] = "\x8a\xac", [0x381f] = "\xea\x9f",
-  [0x3820] = "\x89\x81", [0x3821] = "\x95\xf1", [0x3824] = "\x8f\xea",
-  [0x3825] = "\x93\x67", [0x382a] = "\x8d\xe4", [0x382d] = "\x9a\xcc",
-  [0x3830] = "\x95\xbb", [0x3831] = "\x97\xdb", [0x383a] = "\x89\xf2",
-  [0x383b] = "\x9a\xc8", [0x3841] = "\x91\x59", [0x3842] = "\x9a\xcb",
-  [0x3844] = "\x93\x83", [0x3847] = "\x93\x68", [0x3848] = "\x93\x84",
-  [0x3849] = "\x94\xb7", [0x384a] = "\x92\xcb", [0x384e] = "\x8d\xc7",
-  [0x3852] = "\x9a\xc7", [0x3859] = "\x89\x96", [0x385b] = "\x93\x55",
-  [0x3860] = "\x9a\xc9", [0x3862] = "\x9a\xc5", [0x3865] = "\x90\x6f",
-  [0x3869] = "\x9a\xcd", [0x386e] = "\x8f\x6d", [0x3873] = "\x8b\xab",
-  [0x3875] = "\x9a\xce", [0x3883] = "\x95\xe6", [0x3887] = "\x91\x9d",
-  [0x388c] = "\x92\xc4", [0x388f] = "\x9a\xd0", [0x3898] = "\x96\x6e",
-  [0x389b] = "\x9a\xd1", [0x389e] = "\x9a\xd6", [0x38a3] = "\x95\xad",
-  [0x38a8] = "\x9a\xd5", [0x38a9] = "\x9a\xcf", [0x38aa] = "\x9a\xd2",
-  [0x38ab] = "\x9a\xd4", [0x38ae] = "\x8d\xa4", [0x38b1] = "\x95\xc7",
-  [0x38b5] = "\x9a\xd7", [0x38b7] = "\x92\x64", [0x38ba] = "\x89\xf3",
-  [0x38bc] = "\x8f\xeb", [0x38c1] = "\x9a\xd9", [0x38c3] = "\x9a\xd8",
-  [0x38c5] = "\x8d\x88", [0x38c7] = "\x9a\xda", [0x38c8] = "\x9a\xdc",
-  [0x38c9] = "\x9a\xdb", [0x38cc] = "\x9a\xde", [0x38ce] = "\x9a\xd3",
-  [0x38cf] = "\x9a\xe0", [0x38d4] = "\x9a\xdf", [0x38d5] = "\x9a\xdd",
-  [0x38db] = "\x8e\x6d", [0x38dc] = "\x90\x70", [0x38de] = "\x91\x73",
-  [0x38df] = "\x9a\xe1", [0x38e0] = "\x90\xba", [0x38e1] = "\x88\xeb",
-  [0x38e2] = "\x94\x84", [0x38e7] = "\x92\xd9", [0x38e9] = "\x9a\xe3",
-  [0x38ea] = "\x9a\xe2", [0x38eb] = "\x9a\xe4", [0x38ec] = "\x9a\xe5",
-  [0x38ed] = "\x9a\xe6", [0x38f2] = "\x9a\xe7", [0x38f9] = "\x95\xcf",
-  [0x38fa] = "\x9a\xe8", [0x38ff] = "\x89\xc4", [0x3900] = "\x9a\xe9",
-  [0x3905] = "\x97\x5b", [0x3906] = "\x8a\x4f", [0x3908] = "\x99\xc7",
-  [0x3909] = "\x8f\x67", [0x390a] = "\x91\xbd", [0x390b] = "\x9a\xea",
-  [0x390c] = "\x96\xe9", [0x3912] = "\x96\xb2", [0x3915] = "\x9a\xec",
-  [0x3917] = "\x91\xe5", [0x3919] = "\x93\x56", [0x391a] = "\x91\xbe",
-  [0x391b] = "\x95\x76", [0x391c] = "\x9a\xed", [0x391d] = "\x9a\xee",
-  [0x391e] = "\x89\x9b", [0x3921] = "\x8e\xb8", [0x3922] = "\x9a\xef",
-  [0x3927] = "\x88\xce", [0x3928] = "\x9a\xf0", [0x392e] = "\x9a\xf1",
-  [0x3934] = "\x89\x82", [0x3937] = "\x8a\xef", [0x3938] = "\x93\xde",
-  [0x3939] = "\x95\xf2", [0x393e] = "\x9a\xf5", [0x393f] = "\x91\x74",
-  [0x3940] = "\x9a\xf4", [0x3941] = "\x8c\x5f", [0x3944] = "\x96\x7a",
-  [0x3945] = "\x9a\xf3", [0x3947] = "\x93\x85", [0x3948] = "\x9a\xf7",
-  [0x394a] = "\x9a\xf6", [0x3950] = "\x9a\xf9", [0x3952] = "\x9a\xf8",
-  [0x3955] = "\x89\x9c", [0x3957] = "\x9a\xfa", [0x3958] = "\x8f\xa7",
-  [0x3959] = "\x9a\xfc", [0x395a] = "\x92\x44", [0x395c] = "\x9a\xfb",
-  [0x395e] = "\x95\xb1", [0x3963] = "\x8f\x97", [0x3964] = "\x93\x7a",
-  [0x3968] = "\x9b\x40", [0x396d] = "\x8d\x44", [0x3971] = "\x9b\x41",
-  [0x3972] = "\x94\x40", [0x3973] = "\x94\xdc", [0x3974] = "\x96\xcf",
-  [0x397a] = "\x94\x44", [0x397d] = "\x9b\x4a", [0x3983] = "\x8b\x57",
-  [0x3986] = "\x97\x64", [0x3989] = "\x96\xad", [0x398b] = "\x9b\xaa",
-  [0x398d] = "\x9b\x42", [0x3993] = "\x9b\x45", [0x3995] = "\x91\xc3",
-  [0x3998] = "\x96\x57", [0x399c] = "\x93\x69", [0x39a2] = "\x9b\x46",
-  [0x39a9] = "\x96\x85", [0x39ab] = "\x8d\xc8", [0x39ae] = "\x8f\xa8",
-  [0x39b6] = "\x9b\x47", [0x39b9] = "\x8e\x6f", [0x39bb] = "\x8e\x6e",
-  [0x39c0] = "\x88\xb7", [0x39c1] = "\x8c\xc6", [0x39c3] = "\x90\xa9",
-  [0x39c4] = "\x88\xcf", [0x39c9] = "\x9b\x4b", [0x39ca] = "\x9b\x4c",
-  [0x39cc] = "\x9b\x49", [0x39d5] = "\x89\x57", [0x39d6] = "\x8a\xad",
-  [0x39d8] = "\x9b\x48", [0x39da] = "\x96\xc3", [0x39db] = "\x95\x50",
-  [0x39e6] = "\x88\xa6", [0x39eb] = "\x88\xf7", [0x39ef] = "\x8e\x70",
-  [0x39f1] = "\x88\xd0", [0x39f3] = "\x88\xa1", [0x39f9] = "\x9b\x51",
-  [0x3a01] = "\x9b\x4f", [0x3a08] = "\x96\xba", [0x3a0a] = "\x9b\x52",
-  [0x3a0c] = "\x9b\x50", [0x3a0f] = "\x9b\x4e", [0x3a10] = "\x90\x50",
-  [0x3a15] = "\x9b\x4d", [0x3a19] = "\x95\xd8", [0x3a1f] = "\x8c\xe2",
-  [0x3a25] = "\x9b\x56", [0x3a26] = "\x9b\x57", [0x3a2c] = "\x8f\xa9",
-  [0x3a30] = "\x9b\x53", [0x3a31] = "\x98\x4b", [0x3a36] = "\x94\x6b",
-  [0x3a39] = "\x9b\x55", [0x3a4a] = "\x8d\xa5", [0x3a52] = "\x9b\x58",
-  [0x3a56] = "\x95\x77", [0x3a5a] = "\x9b\x59", [0x3a5c] = "\x9b\x54",
-  [0x3a6f] = "\x96\xb9", [0x3a82] = "\x94\x7d", [0x3a8a] = "\x9b\x5a",
-  [0x3a8b] = "\x95\x51", [0x3aac] = "\x9b\x5b", [0x3aad] = "\x9b\x5f",
-  [0x3aae] = "\x9b\x5c", [0x3ab1] = "\x89\xc5", [0x3ab2] = "\x9b\x5e",
-  [0x3ab9] = "\x8e\xb9", [0x3abb] = "\x9b\x5d", [0x3abc] = "\x8c\x99",
-  [0x3ac0] = "\x9b\x6b", [0x3ac6] = "\x9b\x64", [0x3ac7] = "\x9b\x61",
-  [0x3ad1] = "\x92\x84", [0x3ad3] = "\x9b\x60", [0x3ad6] = "\x9b\x62",
-  [0x3ad9] = "\x9b\x63", [0x3aea] = "\x9b\x65", [0x3aeb] = "\x9b\x66",
-  [0x3af9] = "\x8a\xf0", [0x3afb] = "\x9b\x68", [0x3afc] = "\x9b\x67",
-  [0x3b06] = "\x9b\x69", [0x3b12] = "\x8f\xec", [0x3b1a] = "\x9b\x6c",
-  [0x3b1c] = "\x92\xda", [0x3b20] = "\x89\x64", [0x3b22] = "\x9b\x6a",
-  [0x3b26] = "\x9b\x6d", [0x3b2e] = "\x9b\x6e", [0x3b30] = "\x9b\x71",
-  [0x3b33] = "\x9b\x6f", [0x3b35] = "\x9b\x70", [0x3b40] = "\x8e\x71",
-  [0x3b41] = "\x9b\x72", [0x3b44] = "\x8d\x45", [0x3b45] = "\x9b\x73",
-  [0x3b47] = "\x8e\x9a", [0x3b48] = "\x91\xb6", [0x3b4a] = "\x9b\x74",
-  [0x3b4b] = "\x9b\x75", [0x3b4c] = "\x8e\x79", [0x3b4d] = "\x8d\x46",
-  [0x3b4f] = "\x96\xd0", [0x3b53] = "\x8b\x47", [0x3b54] = "\x8c\xc7",
-  [0x3b55] = "\x9b\x76", [0x3b56] = "\x8a\x77", [0x3b59] = "\x9b\x77",
-  [0x3b5b] = "\x91\xb7", [0x3b60] = "\x9b\x78", [0x3b61] = "\x9b\xa1",
-  [0x3b63] = "\x9b\x79", [0x3b65] = "\x9b\x7a", [0x3b68] = "\x9b\x7b",
-  [0x3b6a] = "\x9b\x7d", [0x3b70] = "\x9b\x7e", [0x3b73] = "\x9b\x80",
-  [0x3b75] = "\x91\xee", [0x3b77] = "\x89\x46", [0x3b78] = "\x8e\xe7",
-  [0x3b79] = "\x88\xc0", [0x3b7b] = "\x91\x76", [0x3b7c] = "\x8a\xae",
-  [0x3b7d] = "\x8e\xb3", [0x3b7f] = "\x8d\x47", [0x3b85] = "\x93\x86",
-  [0x3b87] = "\x8f\x40", [0x3b88] = "\x8a\xaf", [0x3b89] = "\x92\x88",
-  [0x3b8a] = "\x92\xe8", [0x3b8b] = "\x88\xb6", [0x3b8c] = "\x8b\x58",
-  [0x3b8d] = "\x95\xf3", [0x3b8f] = "\x8e\xc0", [0x3b92] = "\x8b\x71",
-  [0x3b93] = "\x90\xe9", [0x3b94] = "\x8e\xba", [0x3b95] = "\x97\x47",
-  [0x3b96] = "\x9b\x81", [0x3b9e] = "\x8b\x7b", [0x3ba0] = "\x8d\xc9",
-  [0x3ba3] = "\x8a\x51", [0x3ba4] = "\x89\x83", [0x3ba5] = "\x8f\xaa",
-  [0x3ba6] = "\x89\xc6", [0x3ba8] = "\x9b\x82", [0x3ba9] = "\x97\x65",
-  [0x3baf] = "\x8f\x68", [0x3bb2] = "\x8e\xe2", [0x3bb3] = "\x9b\x83",
-  [0x3bb4] = "\x8a\xf1", [0x3bb5] = "\x93\xd0", [0x3bb6] = "\x96\xa7",
-  [0x3bb7] = "\x9b\x84", [0x3bb9] = "\x9b\x85", [0x3bbc] = "\x95\x78",
-  [0x3bc0] = "\x9b\x87", [0x3bc2] = "\x8a\xa6", [0x3bc3] = "\x8b\xf5",
-  [0x3bc4] = "\x9b\x86", [0x3bcb] = "\x8a\xb0", [0x3bcd] = "\x90\x51",
-  [0x3bce] = "\x9b\x8b", [0x3bcf] = "\x8e\x40", [0x3bd1] = "\x89\xc7",
-  [0x3bd2] = "\x9b\x8a", [0x3bd4] = "\x9b\x88", [0x3bd5] = "\x9b\x8c",
-  [0x3bd6] = "\x9b\x89", [0x3bd7] = "\x94\x4a", [0x3bd8] = "\x9e\xcb",
-  [0x3bd9] = "\x90\x52", [0x3bdb] = "\x9b\x8d", [0x3bde] = "\x97\xbe",
-  [0x3be0] = "\x9b\x8e", [0x3be3] = "\x9b\x90", [0x3be5] = "\x92\x9e",
-  [0x3be6] = "\x9b\x8f", [0x3be8] = "\x90\xa1", [0x3bea] = "\x8e\x9b",
-  [0x3bee] = "\x91\xce", [0x3bef] = "\x8e\xf5", [0x3bf1] = "\x95\x95",
-  [0x3bf2] = "\x90\xea", [0x3bf4] = "\x8e\xcb", [0x3bf5] = "\x9b\x91",
-  [0x3bf6] = "\x8f\xab", [0x3bf7] = "\x9b\x92", [0x3bf8] = "\x9b\x93",
-  [0x3bf9] = "\x88\xd1", [0x3bfa] = "\x91\xb8", [0x3bfb] = "\x90\x71",
-  [0x3bfd] = "\x9b\x94", [0x3bfe] = "\x93\xb1", [0x3bff] = "\x8f\xac",
-  [0x3c01] = "\x8f\xad", [0x3c03] = "\x9b\x95", [0x3c06] = "\x90\xeb",
-  [0x3c0a] = "\x8f\xae", [0x3c10] = "\x9b\x96", [0x3c12] = "\x9b\x97",
-  [0x3c14] = "\x96\xde", [0x3c18] = "\x9b\x98", [0x3c1d] = "\x8b\xc4",
-  [0x3c21] = "\x8f\x41", [0x3c28] = "\x9b\x99", [0x3c29] = "\x9b\x9a",
-  [0x3c2a] = "\x8e\xda", [0x3c2b] = "\x90\x4b", [0x3c2c] = "\x93\xf2",
-  [0x3c2d] = "\x90\x73", [0x3c2e] = "\x94\xf6", [0x3c2f] = "\x94\x41",
-  [0x3c30] = "\x8b\xc7", [0x3c31] = "\x9b\x9b", [0x3c35] = "\x8b\x8f",
-  [0x3c36] = "\x9b\x9c", [0x3c38] = "\x8b\xfc", [0x3c3a] = "\x93\xcd",
-  [0x3c3b] = "\x89\xae", [0x3c3d] = "\x8e\x72", [0x3c3e] = "\x9b\x9d",
-  [0x3c3f] = "\x9b\xa0", [0x3c40] = "\x9b\x9f", [0x3c41] = "\x8b\xfb",
-  [0x3c43] = "\x9b\x9e", [0x3c45] = "\x93\x57", [0x3c4e] = "\x91\xae",
-  [0x3c50] = "\x93\x6a", [0x3c51] = "\x8e\xc6", [0x3c54] = "\x91\x77",
-  [0x3c55] = "\x97\x9a", [0x3c5c] = "\x9b\xa2", [0x3c5e] = "\x9b\xa3",
-  [0x3c5f] = "\x93\xd4", [0x3c61] = "\x8e\x52", [0x3c66] = "\x9b\xa5",
-  [0x3c69] = "\x9b\xa6", [0x3c7c] = "\x9b\xa7", [0x3c80] = "\x8a\xf2",
-  [0x3c81] = "\x9b\xa8", [0x3c84] = "\x9b\xa9", [0x3c91] = "\x89\xaa",
-  [0x3c98] = "\x91\x5a", [0x3c99] = "\x8a\xe2", [0x3c9b] = "\x9b\xab",
-  [0x3c9c] = "\x96\xa6", [0x3ca1] = "\x91\xd0", [0x3ca3] = "\x8a\x78",
-  [0x3ca6] = "\x9b\xad", [0x3ca7] = "\x9b\xaf", [0x3ca8] = "\x8a\xdd",
-  [0x3cab] = "\x9b\xac", [0x3cac] = "\x9b\xae", [0x3cae] = "\x9b\xb1",
-  [0x3cb5] = "\x9b\xb0", [0x3cb7] = "\x9b\xb2", [0x3cc9] = "\x9b\xb3",
-  [0x3cd0] = "\x93\xbb", [0x3cd1] = "\x8b\xac", [0x3cd8] = "\x89\xe3",
-  [0x3cd9] = "\x9b\xb4", [0x3cda] = "\x9b\xb9", [0x3cdd] = "\x9b\xb7",
-  [0x3cdf] = "\x95\xf5", [0x3ce0] = "\x95\xf4", [0x3ce6] = "\x93\x87",
-  [0x3cea] = "\x9b\xb6", [0x3ceb] = "\x8f\x73", [0x3ced] = "\x9b\xb5",
-  [0x3cf7] = "\x90\x92", [0x3cfb] = "\x9b\xba", [0x3cfe] = "\x8d\xe8",
-  [0x3d01] = "\x9b\xc0", [0x3d04] = "\x9b\xc1", [0x3d05] = "\x9b\xbb",
-  [0x3d06] = "\x8a\x52", [0x3d07] = "\x9b\xbc", [0x3d08] = "\x9b\xc5",
-  [0x3d09] = "\x9b\xc4", [0x3d0a] = "\x9b\xc3", [0x3d0b] = "\x9b\xbf",
-  [0x3d0f] = "\x9b\xbe", [0x3d12] = "\x9b\xc2", [0x3d19] = "\x95\xf6",
-  [0x3d3b] = "\x9b\xc9", [0x3d3c] = "\x9b\xc6", [0x3d3e] = "\x9b\xc8",
-  [0x3d40] = "\x97\x92", [0x3d42] = "\x9b\xc7", [0x3d4c] = "\x9b\xbd",
-  [0x3d59] = "\x90\x93", [0x3d5c] = "\x9b\xca", [0x3d5f] = "\x8d\xb5",
-  [0x3d63] = "\x9b\xcb", [0x3d66] = "\x9b\xcc", [0x3d72] = "\x9b\xcf",
-  [0x3d74] = "\x9b\xce", [0x3d77] = "\x9b\xcd", [0x3d7b] = "\x93\x88",
-  [0x3d7c] = "\x9b\xb8", [0x3d80] = "\x9b\xd5", [0x3d8d] = "\x9b\xd1",
-  [0x3d92] = "\x9b\xd0", [0x3d9c] = "\x9b\xd2", [0x3d9e] = "\x9b\xd3",
-  [0x3da7] = "\x9b\xd6", [0x3daa] = "\x97\xe4", [0x3dac] = "\x9b\xd7",
-  [0x3dad] = "\x9b\xd4", [0x3db9] = "\x9b\xd8", [0x3dbc] = "\x8a\xde",
-  [0x3dbd] = "\x9b\xd9", [0x3dc2] = "\x9b\xdb", [0x3dc3] = "\x9b\xda",
-  [0x3dc6] = "\x9b\xdc", [0x3dcb] = "\x9b\xdd", [0x3dcd] = "\x90\xec",
-  [0x3dce] = "\x8f\x42", [0x3dd1] = "\x8f\x84", [0x3dd3] = "\x91\x83",
-  [0x3dd5] = "\x8d\x48", [0x3dd6] = "\x8d\xb6", [0x3dd7] = "\x8d\x49",
-  [0x3dd8] = "\x8b\x90", [0x3ddb] = "\x9b\xde", [0x3dde] = "\x8d\xb7",
-  [0x3de1] = "\x8c\xc8", [0x3de2] = "\x9b\xdf", [0x3de3] = "\x96\xa4",
-  [0x3de4] = "\x94\x62", [0x3de5] = "\x9b\xe0", [0x3de7] = "\x8d\x4a",
-  [0x3deb] = "\x8a\xaa", [0x3ded] = "\x92\x46", [0x3dee] = "\x8b\xd0",
-  [0x3df2] = "\x8e\x73", [0x3df3] = "\x95\x7a", [0x3df6] = "\x94\xbf",
-  [0x3dfb] = "\x9b\xe1", [0x3dfc] = "\x8a\xf3", [0x3e01] = "\x9b\xe4",
-  [0x3e06] = "\x92\x9f", [0x3e09] = "\x9b\xe3", [0x3e0a] = "\x9b\xe2",
-  [0x3e0b] = "\x9b\xe5", [0x3e0d] = "\x92\xe9", [0x3e15] = "\x90\x83",
-  [0x3e1b] = "\x8e\x74", [0x3e1d] = "\x90\xc8", [0x3e1f] = "\x91\xd1",
-  [0x3e20] = "\x8b\x41", [0x3e23] = "\x92\xa0", [0x3e26] = "\x9b\xe6",
-  [0x3e27] = "\x9b\xe7", [0x3e28] = "\x8f\xed", [0x3e2d] = "\x96\x58",
-  [0x3e30] = "\x9b\xea", [0x3e33] = "\x9b\xe9", [0x3e34] = "\x9b\xe8",
-  [0x3e35] = "\x95\x9d", [0x3e37] = "\x9b\xf1", [0x3e3c] = "\x96\x79",
-  [0x3e3e] = "\x9b\xeb", [0x3e44] = "\x9b\xed", [0x3e45] = "\x96\x8b",
-  [0x3e47] = "\x9b\xec", [0x3e4f] = "\x9b\xee", [0x3e51] = "\x94\xa6",
-  [0x3e52] = "\x9b\xef", [0x3e53] = "\x95\xbc", [0x3e54] = "\x9b\xf0",
-  [0x3e62] = "\x8a\xb1", [0x3e63] = "\x95\xbd", [0x3e64] = "\x94\x4e",
-  [0x3e65] = "\x9b\xf2", [0x3e66] = "\x9b\xf3", [0x3e68] = "\x8d\x4b",
-  [0x3e69] = "\x8a\xb2", [0x3e6a] = "\x9b\xf4", [0x3e6b] = "\x8c\xb6",
-  [0x3e6c] = "\x97\x63", [0x3e6d] = "\x97\x48", [0x3e6e] = "\x8a\xf4",
-  [0x3e6f] = "\x9b\xf6", [0x3e71] = "\x92\xa1", [0x3e73] = "\x8d\x4c",
-  [0x3e74] = "\x8f\xaf", [0x3e77] = "\x94\xdd", [0x3e7a] = "\x8f\xb0",
-  [0x3e7f] = "\x8f\x98", [0x3e85] = "\x92\xea", [0x3e86] = "\x95\xf7",
-  [0x3e87] = "\x93\x58", [0x3e8a] = "\x8d\x4d", [0x3e8c] = "\x95\x7b",
-  [0x3e90] = "\x9b\xf7", [0x3e96] = "\x93\x78", [0x3e97] = "\x8d\xc0",
-  [0x3e9b] = "\x8c\xc9", [0x3e9d] = "\x92\xeb", [0x3ea5] = "\x88\xc1",
-  [0x3ea6] = "\x8f\x8e", [0x3ea7] = "\x8d\x4e", [0x3ea8] = "\x97\x66",
-  [0x3eb1] = "\x9b\xf8", [0x3eb2] = "\x9b\xf9", [0x3eb3] = "\x94\x70",
-  [0x3eb8] = "\x9b\xfa", [0x3eb9] = "\x97\xf5", [0x3eba] = "\x98\x4c",
-  [0x3ebf] = "\x9b\xfc", [0x3ec0] = "\x9b\xfb", [0x3ec3] = "\x8a\x66",
-  [0x3ec6] = "\x9c\x40", [0x3eca] = "\x9c\x43", [0x3ecb] = "\x9c\x44",
-  [0x3ecd] = "\x9c\x42", [0x3ecf] = "\x95\x5f", [0x3ed0] = "\x8f\xb1",
-  [0x3ed1] = "\x9c\x46", [0x3ed2] = "\x9c\x45", [0x3ed3] = "\x9c\x41",
-  [0x3ed8] = "\x9c\x47", [0x3ed9] = "\x9c\x48", [0x3edc] = "\x9c\x49",
-  [0x3ee0] = "\x9c\x4c", [0x3ee1] = "\x9c\x4a", [0x3ee3] = "\x9c\x4b",
-  [0x3ee4] = "\x9c\x4d", [0x3ee6] = "\x89\x84", [0x3ee7] = "\x92\xec",
-  [0x3ee8] = "\x9c\x4e", [0x3eea] = "\x8c\x9a", [0x3eeb] = "\x89\xf4",
-  [0x3eec] = "\x94\x55", [0x3eee] = "\x9c\x4f", [0x3eef] = "\x93\xf9",
-  [0x3ef1] = "\x95\xd9", [0x3ef3] = "\x9c\x50", [0x3ef4] = "\x98\x4d",
-  [0x3ef9] = "\x9c\x51", [0x3efa] = "\x95\xbe", [0x3efb] = "\x9c\x54",
-  [0x3efc] = "\x98\x9f", [0x3efd] = "\x98\xaf", [0x3eff] = "\x8e\xae",
-  [0x3f00] = "\x93\xf3", [0x3f01] = "\x9c\x55", [0x3f03] = "\x8b\x7c",
-  [0x3f04] = "\x92\xa2", [0x3f05] = "\x88\xf8", [0x3f06] = "\x9c\x56",
-  [0x3f07] = "\x95\xa4", [0x3f08] = "\x8d\x4f", [0x3f0b] = "\x92\x6f",
-  [0x3f0f] = "\x92\xed", [0x3f15] = "\x96\xed", [0x3f16] = "\x8c\xb7",
-  [0x3f17] = "\x8c\xca", [0x3f19] = "\x9c\x57", [0x3f1d] = "\x9c\x58",
-  [0x3f1f] = "\x9c\x5e", [0x3f21] = "\x8e\xe3", [0x3f25] = "\x92\xa3",
-  [0x3f27] = "\x8b\xad", [0x3f28] = "\x9c\x59", [0x3f2c] = "\x95\x4a",
-  [0x3f2e] = "\x92\x65", [0x3f31] = "\x9c\x5a", [0x3f38] = "\x9c\x5b",
-  [0x3f3a] = "\x8b\xae", [0x3f3c] = "\x9c\x5c", [0x3f3e] = "\x9c\x5d",
-  [0x3f41] = "\x9c\x5f", [0x3f43] = "\x93\x96", [0x3f46] = "\x9c\x60",
-  [0x3f47] = "\x9c\x61", [0x3f49] = "\x9c\x62", [0x3f4c] = "\x9c\x53",
-  [0x3f4d] = "\x9c\x52", [0x3f51] = "\x9c\x63", [0x3f52] = "\x8c\x60",
-  [0x3f56] = "\x95\x46", [0x3f59] = "\x8d\xca", [0x3f5a] = "\x95\x56",
-  [0x3f5b] = "\x92\xa4", [0x3f5c] = "\x95\x6a", [0x3f5d] = "\x9c\x64",
-  [0x3f60] = "\x8f\xb2", [0x3f61] = "\x89\x65", [0x3f63] = "\x9c\x65",
-  [0x3f67] = "\x9c\x66", [0x3f69] = "\x96\xf0", [0x3f6c] = "\x94\xde",
-  [0x3f6f] = "\x9c\x69", [0x3f70] = "\x89\x9d", [0x3f71] = "\x90\xaa",
-  [0x3f72] = "\x9c\x68", [0x3f73] = "\x9c\x67", [0x3f74] = "\x8c\x61",
-  [0x3f75] = "\x91\xd2", [0x3f77] = "\x9c\x6d", [0x3f78] = "\x9c\x6b",
-  [0x3f7a] = "\x9c\x6a", [0x3f7b] = "\x97\xa5", [0x3f7c] = "\x8c\xe3",
-  [0x3f80] = "\x8f\x99", [0x3f81] = "\x9c\x6c", [0x3f82] = "\x93\x6b",
-  [0x3f83] = "\x8f\x5d", [0x3f87] = "\x93\xbe", [0x3f88] = "\x9c\x70",
-  [0x3f89] = "\x9c\x6f", [0x3f8e] = "\x9c\x6e", [0x3f90] = "\x9c\x71",
-  [0x3f91] = "\x8c\xe4", [0x3f98] = "\x9c\x72", [0x3f99] = "\x95\x9c",
-  [0x3f9a] = "\x8f\x7a", [0x3f9d] = "\x9c\x73", [0x3f9e] = "\x94\xf7",
-  [0x3fa3] = "\x93\xbf", [0x3fa4] = "\x92\xa5", [0x3fa9] = "\x93\x4f",
-  [0x3fac] = "\x9c\x74", [0x3fad] = "\x8b\x4a", [0x3fb3] = "\x90\x53",
-  [0x3fb5] = "\x95\x4b", [0x3fbc] = "\x8a\xf5", [0x3fbd] = "\x94\x45",
-  [0x3fc6] = "\x9c\x75", [0x3fc7] = "\x8e\x75", [0x3fc8] = "\x96\x59",
-  [0x3fc9] = "\x96\x5a", [0x3fcc] = "\x89\x9e", [0x3fcd] = "\x9c\x7a",
-  [0x3fd0] = "\x92\x89", [0x3fd4] = "\x9c\x77", [0x3fdb] = "\x89\xf5",
-  [0x3fe0] = "\x9c\xab", [0x3fe1] = "\x9c\x79", [0x3fe5] = "\x94\x4f",
-  [0x3fe8] = "\x9c\x78", [0x3feb] = "\x9c\x76", [0x3fed] = "\x8d\x9a",
-  [0x3fef] = "\x9c\x7c", [0x3ffe] = "\x9c\x83", [0x3fff] = "\x9c\x89",
-  [0x4000] = "\x9c\x81", [0x4002] = "\x93\x7b", [0x4005] = "\x9c\x86",
-  [0x4006] = "\x95\x7c", [0x4009] = "\x9c\x80", [0x400b] = "\x9c\x85",
-  [0x400c] = "\x97\xe5", [0x400d] = "\x8e\x76", [0x4010] = "\x91\xd3",
-  [0x4011] = "\x9c\x7d", [0x4015] = "\x8b\x7d", [0x4016] = "\x9c\x88",
-  [0x4017] = "\x90\xab", [0x4018] = "\x89\x85", [0x4019] = "\x9c\x82",
-  [0x401a] = "\x89\xf6", [0x401b] = "\x9c\x87", [0x401f] = "\x8b\xaf",
-  [0x4021] = "\x9c\x84", [0x402a] = "\x9c\x8a", [0x4031] = "\x9c\x8c",
-  [0x4032] = "\x9c\x96", [0x4033] = "\x9c\x94", [0x4036] = "\x9c\x91",
-  [0x403a] = "\x9c\x90", [0x403b] = "\x97\xf6", [0x403d] = "\x9c\x92",
-  [0x4040] = "\x8b\xb0", [0x4042] = "\x8d\x50", [0x4045] = "\x8f\x9a",
-  [0x4049] = "\x9c\x99", [0x404a] = "\x9c\x8b", [0x404f] = "\x9c\x8f",
-  [0x4050] = "\x9c\x7e", [0x4052] = "\x89\xf8", [0x4053] = "\x9c\x93",
-  [0x4054] = "\x9c\x95", [0x4055] = "\x92\x70", [0x4058] = "\x8d\xa6",
-  [0x4059] = "\x89\xb6", [0x405a] = "\x9c\x8d", [0x405b] = "\x9c\x98",
-  [0x405c] = "\x9c\x97", [0x405d] = "\x8b\xb1", [0x405f] = "\x91\xa7",
-  [0x4060] = "\x8a\x86", [0x4065] = "\x8c\x62", [0x4067] = "\x9c\x8e",
-  [0x4071] = "\x9c\x9a", [0x4073] = "\x9c\x9d", [0x4074] = "\x9c\x9f",
-  [0x4079] = "\x8e\xbb", [0x407b] = "\x9c\xa5", [0x407c] = "\x92\xee",
-  [0x407d] = "\x9c\x9b", [0x4082] = "\x9c\xa3", [0x4084] = "\x89\xf7",
-  [0x4086] = "\x9c\xa1", [0x4087] = "\x9c\xa2", [0x408a] = "\x9c\x9e",
-  [0x408b] = "\x9c\xa0", [0x408f] = "\x8c\xe5", [0x4090] = "\x97\x49",
-  [0x4093] = "\x8a\xb3", [0x4096] = "\x89\x78", [0x4097] = "\x9c\xa4",
-  [0x4099] = "\x94\x59", [0x409a] = "\x88\xab", [0x40a2] = "\x94\xdf",
-  [0x40a3] = "\x9c\x7b", [0x40a4] = "\x9c\xaa", [0x40a5] = "\x9c\xae",
-  [0x40a6] = "\x96\xe3", [0x40a8] = "\x9c\xa7", [0x40ac] = "\x93\x89",
-  [0x40ad] = "\x9c\xac", [0x40b5] = "\x8f\xee", [0x40b6] = "\x9c\xad",
-  [0x40b7] = "\x93\xd5", [0x40c1] = "\x98\x66", [0x40c3] = "\x9c\xa9",
-  [0x40c8] = "\x9c\xaf", [0x40ca] = "\x8d\x9b", [0x40cc] = "\x90\xc9",
-  [0x40cf] = "\x88\xd2", [0x40d0] = "\x9c\xa8", [0x40d1] = "\x9c\xa6",
-  [0x40d3] = "\x91\x79", [0x40d7] = "\x9c\x9c", [0x40d8] = "\x8e\x53",
-  [0x40e0] = "\x91\xc4", [0x40e1] = "\x9c\xbb", [0x40e3] = "\x91\x7a",
-  [0x40e4] = "\x9c\xb6", [0x40e6] = "\x9c\xb3", [0x40e7] = "\x9c\xb4",
-  [0x40e9] = "\x8e\xe4", [0x40ea] = "\x9c\xb7", [0x40eb] = "\x9c\xba",
-  [0x40f0] = "\x9c\xb5", [0x40f1] = "\x8f\x44", [0x40f3] = "\x9c\xb8",
-  [0x40f6] = "\x9c\xb2", [0x40f8] = "\x96\xfa", [0x40f9] = "\x96\xf9",
-  [0x40fd] = "\x9c\xbc", [0x40fe] = "\x9c\xbd", [0x40ff] = "\x88\xd3",
-  [0x4105] = "\x9c\xb1", [0x410a] = "\x8b\xf0", [0x410b] = "\x88\xa4",
-  [0x410f] = "\x8a\xb4", [0x4111] = "\x9c\xb9", [0x4117] = "\x9c\xc1",
-  [0x4118] = "\x9c\xc0", [0x411c] = "\x9c\xc5", [0x4124] = "\x9c\xc6",
-  [0x412c] = "\x9c\xc4", [0x412d] = "\x9c\xc7", [0x412e] = "\x9c\xbf",
-  [0x412f] = "\x9c\xc3", [0x4132] = "\x9c\xc8", [0x4134] = "\x9c\xc9",
-  [0x4137] = "\x9c\xbe", [0x4138] = "\x8e\x9c", [0x413a] = "\x9c\xc2",
-  [0x413b] = "\x91\xd4", [0x413c] = "\x8d\x51", [0x413d] = "\x9c\xb0",
-  [0x413e] = "\x90\x54", [0x4143] = "\x9c\xd6", [0x4145] = "\x95\xe7",
-  [0x4148] = "\x9c\xcc", [0x4149] = "\x9c\xcd", [0x414a] = "\x9c\xce",
-  [0x414d] = "\x9c\xd5", [0x414f] = "\x9c\xd4", [0x4152] = "\x96\x9d",
-  [0x4153] = "\x8a\xb5", [0x4155] = "\x9c\xd2", [0x4157] = "\x8c\x64",
-  [0x4158] = "\x8a\x53", [0x415b] = "\x9c\xcf", [0x415e] = "\x97\xb6",
-  [0x415f] = "\x9c\xd1", [0x4160] = "\x88\xd4", [0x4161] = "\x9c\xd3",
-  [0x4163] = "\x9c\xca", [0x4164] = "\x9c\xd0", [0x4165] = "\x9c\xd7",
-  [0x4166] = "\x8c\x63", [0x4167] = "\x9c\xcb", [0x416e] = "\x97\x7c",
-  [0x4172] = "\x97\x4a", [0x4177] = "\x9c\xda", [0x417a] = "\x9c\xde",
-  [0x417e] = "\x91\x9e", [0x4180] = "\x97\xf7", [0x4181] = "\x9c\xdf",
-  [0x4184] = "\x9c\xdc", [0x4186] = "\x9c\xd9", [0x4189] = "\x9c\xd8",
-  [0x418a] = "\x9c\xdd", [0x4194] = "\x95\xae", [0x4197] = "\x93\xb2",
-  [0x4199] = "\x8c\x65", [0x419b] = "\x9c\xe0", [0x419c] = "\x9c\xdb",
-  [0x419e] = "\x9c\xe1", [0x41a2] = "\x8c\x9b", [0x41a6] = "\x89\xaf",
-  [0x41aa] = "\x9c\xe9", [0x41ae] = "\x8a\xb6", [0x41b3] = "\x9c\xe7",
-  [0x41b6] = "\x9c\xe8", [0x41b7] = "\x8d\xa7", [0x41b8] = "\x9c\xe6",
-  [0x41b9] = "\x9c\xe4", [0x41ba] = "\x9c\xe3", [0x41bb] = "\x9c\xea",
-  [0x41bc] = "\x9c\xe2", [0x41bd] = "\x9c\xec", [0x41c0] = "\x89\xf9",
-  [0x41d3] = "\x9c\xee", [0x41d6] = "\x9c\xed", [0x41e2] = "\x92\xa6",
-  [0x41e4] = "\x9c\xf1", [0x41e6] = "\x9c\xef", [0x41e7] = "\x9c\xe5",
-  [0x41e8] = "\x8c\x9c", [0x41ea] = "\x9c\xf0", [0x41ec] = "\x9c\xf4",
-  [0x41ed] = "\x9c\xf3", [0x41ee] = "\x9c\xf5", [0x41ef] = "\x9c\xf2",
-  [0x41f0] = "\x9c\xf6", [0x41f8] = "\x9c\xf7", [0x41f9] = "\x9c\xf8",
-  [0x41fa] = "\x95\xe8", [0x41fc] = "\x9c\xfa", [0x41fd] = "\x9c\xf9",
-  [0x41fe] = "\x8f\x5e", [0x4200] = "\x90\xac", [0x4201] = "\x89\xe4",
-  [0x4202] = "\x89\xfa", [0x4204] = "\x9c\xfb", [0x4206] = "\x88\xbd",
-  [0x420a] = "\x90\xca", [0x420b] = "\x9c\xfc", [0x420d] = "\xe6\xc1",
-  [0x420e] = "\x9d\x40", [0x420f] = "\x8c\x81", [0x4211] = "\x9d\x41",
-  [0x4216] = "\x90\xed", [0x421a] = "\x9d\x42", [0x421e] = "\x9d\x43",
-  [0x421f] = "\x8b\x59", [0x4220] = "\x9d\x44", [0x4222] = "\x9d\x45",
-  [0x4223] = "\x9d\x46", [0x4224] = "\x91\xd5", [0x4228] = "\x8c\xcb",
-  [0x422b] = "\x96\xdf", [0x422f] = "\x96\x5b", [0x4230] = "\x8f\x8a",
-  [0x4231] = "\x9d\x47", [0x4237] = "\x90\xee", [0x4238] = "\xe7\xbb",
-  [0x4239] = "\x94\xe0", [0x423b] = "\x8e\xe8", [0x423d] = "\x8d\xcb",
-  [0x423e] = "\x9d\x48", [0x4243] = "\x91\xc5", [0x4245] = "\x95\xa5",
-  [0x4248] = "\x91\xef", [0x424b] = "\x9d\x4b", [0x424e] = "\x9d\x49",
-  [0x4250] = "\x9d\x4c", [0x4253] = "\x9d\x4a", [0x4258] = "\x9d\x4d",
-  [0x425e] = "\x95\xaf", [0x4261] = "\x88\xb5", [0x4266] = "\x95\x7d",
-  [0x4269] = "\x94\xe1", [0x426c] = "\x9d\x4e", [0x426e] = "\x9d\x51",
-  [0x426f] = "\x8f\xb3", [0x4270] = "\x8b\x5a", [0x4272] = "\x9d\x4f",
-  [0x4273] = "\x9d\x56", [0x4274] = "\x8f\xb4", [0x4279] = "\x9d\x50",
-  [0x427a] = "\x94\x63", [0x4281] = "\x97\x7d", [0x4282] = "\x9d\x52",
-  [0x4283] = "\x9d\x53", [0x4284] = "\x9d\x57", [0x4285] = "\x93\x8a",
-  [0x4286] = "\x9d\x54", [0x4287] = "\x8d\x52", [0x4288] = "\x90\xdc",
-  [0x428b] = "\x9d\x65", [0x428c] = "\x94\xb2", [0x428e] = "\x91\xf0",
-  [0x429b] = "\x94\xe2", [0x429c] = "\x9d\xab", [0x42a1] = "\x95\xf8",
-  [0x42a5] = "\x92\xef", [0x42a9] = "\x96\x95", [0x42ab] = "\x9d\x5a",
-  [0x42ac] = "\x89\x9f", [0x42ad] = "\x92\x8a", [0x42b2] = "\x9d\x63",
-  [0x42b5] = "\x92\x53", [0x42b6] = "\x9d\x5d", [0x42b7] = "\x9d\x64",
-  [0x42b8] = "\x9d\x5f", [0x42b9] = "\x9d\x66", [0x42ba] = "\x9d\x62",
-  [0x42bc] = "\x9d\x61", [0x42bd] = "\x94\x8f", [0x42bf] = "\x9d\x5b",
-  [0x42c0] = "\x89\xfb", [0x42c1] = "\x9d\x59", [0x42c2] = "\x8b\x91",
-  [0x42c3] = "\x91\xf1", [0x42c4] = "\x9d\x55", [0x42c7] = "\x9d\x58",
-  [0x42c8] = "\x8d\x53", [0x42c9] = "\x90\xd9", [0x42cb] = "\x8f\xb5",
-  [0x42cc] = "\x9d\x60", [0x42cd] = "\x94\x71", [0x42d0] = "\x8b\x92",
-  [0x42d1] = "\x8a\x67", [0x42dc] = "\x8a\x87", [0x42dd] = "\x90\x40",
-  [0x42de] = "\x9d\x68", [0x42df] = "\x9d\x6d", [0x42e1] = "\x9d\x69",
-  [0x42e3] = "\x8c\x9d", [0x42e5] = "\x9d\x6e", [0x42e6] = "\x8e\x41",
-  [0x42e7] = "\x8d\x89", [0x42ee] = "\x8f\x45", [0x42ef] = "\x9d\x5c",
-  [0x42f1] = "\x8e\x9d", [0x42f2] = "\x9d\x6b", [0x42f7] = "\x8e\x77",
-  [0x42f8] = "\x9d\x6c", [0x42f9] = "\x88\xc2", [0x42fc] = "\x9d\x67",
-  [0x4301] = "\x92\xa7", [0x4309] = "\x8b\x93", [0x430f] = "\x8b\xb2",
-  [0x4317] = "\x9d\x6a", [0x4318] = "\x88\xa5", [0x431b] = "\x8d\xc1",
-  [0x431f] = "\x90\x55", [0x432a] = "\x92\xf0", [0x432d] = "\x94\xd2",
-  [0x432e] = "\x9d\x70", [0x432f] = "\x91\x7d", [0x4339] = "\x91\xa8",
-  [0x433c] = "\x8e\x4a", [0x433d] = "\x9d\x71", [0x433f] = "\x9d\x73",
-  [0x4340] = "\x9d\x6f", [0x4345] = "\x95\xdf", [0x4347] = "\x92\xbb",
-  [0x434c] = "\x91\x7b", [0x4357] = "\x95\xf9", [0x4358] = "\x8e\xcc",
-  [0x4359] = "\x9d\x80", [0x435b] = "\x9d\x7e", [0x435e] = "\x90\x98",
-  [0x4362] = "\x8c\x9e", [0x4366] = "\x9d\x78", [0x4367] = "\x8f\xb7",
-  [0x436a] = "\x93\xe6", [0x436b] = "\x94\x50", [0x4370] = "\x9d\x76",
-  [0x4373] = "\x91\x7c", [0x4378] = "\x8e\xf6", [0x4379] = "\x9d\x7b",
-  [0x437c] = "\x8f\xb6", [0x437e] = "\x9d\x75", [0x437f] = "\x9d\x7a",
-  [0x4382] = "\x94\x72", [0x4386] = "\x9d\x74", [0x4388] = "\x8c\x40",
-  [0x438b] = "\x8a\x7c", [0x438f] = "\x9d\x7c", [0x4390] = "\x97\xa9",
-  [0x4391] = "\x8d\xcc", [0x4392] = "\x92\x54", [0x4393] = "\x9d\x79",
-  [0x4395] = "\x90\xda", [0x4397] = "\x8d\x54", [0x4398] = "\x90\x84",
-  [0x4399] = "\x89\x86", [0x439a] = "\x91\x5b", [0x439b] = "\x9d\x77",
-  [0x439c] = "\x8b\x64", [0x43a2] = "\x8c\x66", [0x43a4] = "\x92\xcd",
-  [0x43a5] = "\x9d\x7d", [0x43ab] = "\x91\x7e", [0x43ae] = "\x9d\x81",
-  [0x43b0] = "\x9d\x83", [0x43b3] = "\x91\xb5", [0x43b4] = "\x9d\x89",
-  [0x43b6] = "\x9d\x84", [0x43b9] = "\x9d\x86", [0x43bf] = "\x95\x60",
-  [0x43c0] = "\x92\xf1", [0x43c2] = "\x9d\x87", [0x43c6] = "\x97\x4b",
-  [0x43ca] = "\x97\x67", [0x43cb] = "\x8a\xb7", [0x43d1] = "\x88\xac",
-  [0x43d3] = "\x9d\x85", [0x43d9] = "\x9d\x82", [0x43de] = "\x8a\xf6",
-  [0x43e4] = "\x89\x87", [0x43e6] = "\x9d\x88", [0x43ea] = "\x97\x68",
-  [0x43f6] = "\x9d\x8c", [0x43fd] = "\x91\xb9", [0x43ff] = "\x9d\x93",
-  [0x4403] = "\x9d\x8d", [0x4406] = "\x9d\x8a", [0x4407] = "\x9d\x91",
-  [0x440c] = "\x9d\x72", [0x4416] = "\x9d\x8e", [0x4418] = "\x9d\x92",
-  [0x441c] = "\x94\xc0", [0x441d] = "\x93\x8b", [0x4424] = "\x9d\x8b",
-  [0x4426] = "\x9d\x8f", [0x442a] = "\x8c\x67", [0x442e] = "\x8d\xef",
-  [0x4432] = "\x90\xdb", [0x443e] = "\x9d\x97", [0x4448] = "\x93\x45",
-  [0x4457] = "\x9d\x94", [0x4459] = "\x96\x80", [0x445f] = "\x9d\x95",
-  [0x4466] = "\x9d\x96", [0x4468] = "\x96\xcc", [0x446a] = "\x90\xa0",
-  [0x4473] = "\x8c\x82", [0x4478] = "\x9d\x9d", [0x4482] = "\x8e\x54",
-  [0x4483] = "\x9d\x9a", [0x4485] = "\x9d\x99", [0x448a] = "\x94\x51",
-  [0x448e] = "\x93\xb3", [0x4494] = "\x93\x50", [0x4495] = "\x9d\x9b",
-  [0x4499] = "\x9d\x9c", [0x449b] = "\x95\x8f", [0x449d] = "\x94\x64",
-  [0x449e] = "\x8e\x42", [0x44a0] = "\x90\xef", [0x44a2] = "\x96\x6f",
-  [0x44a9] = "\x8a\x68", [0x44ab] = "\x9d\xa3", [0x44ac] = "\x9d\x9e",
-  [0x44b1] = "\x97\x69", [0x44b2] = "\x9d\xa5", [0x44b5] = "\x9d\xa1",
-  [0x44b7] = "\x9d\xa2", [0x44bd] = "\x91\x80", [0x44c2] = "\x9d\xa0",
-  [0x44c4] = "\x9d\x5e", [0x44c8] = "\x9d\xa4", [0x44ca] = "\x9d\x9f",
-  [0x44d0] = "\x9d\xa9", [0x44d1] = "\x9d\xaa", [0x44d2] = "\x93\x46",
-  [0x44d3] = "\x9d\xac", [0x44d6] = "\x8e\x43", [0x44d7] = "\x9d\xa7",
-  [0x44dc] = "\x8b\x5b", [0x44df] = "\x9d\xad", [0x44e1] = "\x9d\xa6",
-  [0x44e2] = "\x9d\xb1", [0x44e4] = "\x9d\xb0", [0x44e6] = "\x9d\xaf",
-  [0x44ea] = "\x9d\xb2", [0x44ed] = "\x9d\xb4", [0x44ee] = "\x8f\xef",
-  [0x44f0] = "\x9d\xb3", [0x44f5] = "\x9d\xb7", [0x4508] = "\x9d\xb5",
-  [0x450c] = "\x9d\xb6", [0x450d] = "\x9d\x90", [0x4513] = "\x9d\xb9",
-  [0x4514] = "\x9d\xb8", [0x451a] = "\x9d\x98", [0x451b] = "\x9d\xba",
-  [0x451c] = "\x9d\xae", [0x451f] = "\x8e\x78", [0x4524] = "\x9d\xbb",
-  [0x4525] = "\x9d\xbc", [0x4526] = "\x9d\xbe", [0x4527] = "\x9d\xbd",
-  [0x4528] = "\x9d\xbf", [0x4529] = "\x89\xfc", [0x452b] = "\x8d\x55",
-  [0x452e] = "\x95\xfa", [0x452f] = "\x90\xad", [0x4535] = "\x8c\xcc",
-  [0x4538] = "\x9d\xc1", [0x453d] = "\x9d\xc4", [0x453f] = "\x95\x71",
-  [0x4541] = "\x8b\x7e", [0x4545] = "\x9d\xc3", [0x4546] = "\x9d\xc2",
-  [0x4547] = "\x94\x73", [0x4548] = "\x9d\xc5", [0x4549] = "\x8b\xb3",
-  [0x454d] = "\x9d\xc7", [0x454e] = "\x9d\xc6", [0x4552] = "\x8a\xb8",
-  [0x4553] = "\x8e\x55", [0x4556] = "\x93\xd6", [0x455c] = "\x8c\x68",
-  [0x4560] = "\x90\x94", [0x4562] = "\x9d\xc8", [0x4564] = "\x90\xae",
-  [0x4565] = "\x93\x47", [0x4567] = "\x95\x7e", [0x4568] = "\x9d\xc9",
-  [0x4572] = "\x9d\xca", [0x4573] = "\x9d\xcb", [0x4577] = "\x95\xb6",
-  [0x4578] = "\x9b\x7c", [0x4579] = "\x90\xc4", [0x457c] = "\x95\x6b",
-  [0x457e] = "\x8d\xd6", [0x4580] = "\x94\xe3", [0x4581] = "\x94\xc1",
-  [0x4587] = "\x93\x6c", [0x4589] = "\x97\xbf", [0x458b] = "\x9d\xcd",
-  [0x458c] = "\x8e\xce", [0x458f] = "\x9d\xce", [0x4591] = "\x88\xb4",
-  [0x4594] = "\x8b\xd2", [0x4595] = "\x90\xcb", [0x4597] = "\x95\x80",
-  [0x459b] = "\x9d\xcf", [0x459c] = "\x8e\x61", [0x459d] = "\x92\x66",
-  [0x459f] = "\x8e\x7a", [0x45a0] = "\x90\x56", [0x45a7] = "\x9d\xd0",
-  [0x45a9] = "\x95\xfb", [0x45ac] = "\x89\x97", [0x45ad] = "\x8e\x7b",
-  [0x45b1] = "\x9d\xd3", [0x45b3] = "\x9d\xd1", [0x45b4] = "\x9d\xd4",
-  [0x45b5] = "\x97\xb7", [0x45b6] = "\x9d\xd2", [0x45bb] = "\x90\xf9",
-  [0x45bc] = "\x9d\xd5", [0x45bf] = "\x91\xb0", [0x45c2] = "\x9d\xd6",
-  [0x45c7] = "\x8a\xf8", [0x45c9] = "\x9d\xd8", [0x45cb] = "\x9d\xd7",
-  [0x45d0] = "\x9d\xd9", [0x45d1] = "\x9d\xda", [0x45d2] = "\x8a\xf9",
-  [0x45d5] = "\x93\xfa", [0x45d6] = "\x92\x55", [0x45d7] = "\x8b\x8c",
-  [0x45d8] = "\x8e\x7c", [0x45d9] = "\x91\x81", [0x45dc] = "\x8f\x7b",
-  [0x45dd] = "\x88\xae", [0x45e1] = "\x9d\xdb", [0x45ea] = "\x89\xa0",
-  [0x45eb] = "\x9d\xdf", [0x45f2] = "\x8d\x56", [0x45f3] = "\x9d\xde",
-  [0x45f6] = "\x8d\xa9", [0x45f7] = "\x8f\xb8", [0x45fa] = "\x9d\xdd",
-  [0x45fc] = "\x8f\xb9", [0x45fe] = "\x96\xbe", [0x45ff] = "\x8d\xa8",
-  [0x4603] = "\x88\xd5", [0x4604] = "\x90\xcc", [0x460c] = "\x9d\xe4",
-  [0x460f] = "\x90\xaf", [0x4610] = "\x89\x66", [0x4615] = "\x8f\x74",
-  [0x4617] = "\x96\x86", [0x4618] = "\x8d\xf0", [0x461d] = "\x8f\xba",
-  [0x461f] = "\x90\xa5", [0x4624] = "\x9d\xe3", [0x4625] = "\x9d\xe1",
-  [0x4626] = "\x9d\xe2", [0x462c] = "\x92\x8b", [0x462f] = "\x9e\x45",
-  [0x4631] = "\x9d\xe8", [0x4632] = "\x8e\x9e", [0x4633] = "\x8d\x57",
-  [0x4634] = "\x9d\xe6", [0x4639] = "\x9d\xe7", [0x463b] = "\x90\x57",
-  [0x463f] = "\x9d\xe5", [0x4642] = "\x8e\x4e", [0x464d] = "\x9d\xea",
-  [0x464e] = "\x9d\xe9", [0x464f] = "\x9d\xee", [0x4652] = "\x9d\xef",
-  [0x4654] = "\x9d\xeb", [0x4656] = "\x8a\x41", [0x4657] = "\x9d\xec",
-  [0x4658] = "\x9d\xed", [0x4659] = "\x94\xd3", [0x465e] = "\x95\x81",
-  [0x465f] = "\x8c\x69", [0x4660] = "\x9d\xf0", [0x4664] = "\x90\xb0",
-  [0x4666] = "\x8f\xbb", [0x466a] = "\x92\x71", [0x4671] = "\x8b\xc5",
-  [0x4673] = "\x9d\xf1", [0x4674] = "\x9d\xf5", [0x4677] = "\x89\xc9",
-  [0x4678] = "\x9d\xf2", [0x4679] = "\x9d\xf4", [0x467e] = "\x9d\xf3",
-  [0x4681] = "\x8f\x8b", [0x4686] = "\x92\x67", [0x4687] = "\x88\xc3",
-  [0x4688] = "\x9d\xf6", [0x468d] = "\x9d\xf7", [0x4692] = "\x92\xa8",
-  [0x4696] = "\x97\xef", [0x469b] = "\x8e\x62", [0x469e] = "\x95\xe9",
-  [0x46a4] = "\x96\x5c", [0x46a8] = "\x9e\x41", [0x46a9] = "\x9d\xf9",
-  [0x46ac] = "\x9d\xfc", [0x46ae] = "\x9d\xfb", [0x46b1] = "\x9d\xf8",
-  [0x46b4] = "\x9e\x40", [0x46b7] = "\x93\xdc", [0x46b9] = "\x9d\xfa",
-  [0x46c6] = "\x9e\x42", [0x46c9] = "\x8f\x8c", [0x46ca] = "\x9e\x43",
-  [0x46cc] = "\x97\x6a", [0x46cd] = "\x94\x98", [0x46d0] = "\x9e\x44",
-  [0x46d6] = "\x9e\x46", [0x46d9] = "\x9e\x47", [0x46e0] = "\x9e\x48",
-  [0x46e2] = "\x8b\xc8", [0x46e3] = "\x89\x67", [0x46e4] = "\x8d\x58",
-  [0x46e5] = "\x9e\x49", [0x46e7] = "\x9e\x4a", [0x46e8] = "\x8f\x91",
-  [0x46e9] = "\x91\x82", [0x46ec] = "\x99\xd6", [0x46ed] = "\x91\x5d",
-  [0x46ee] = "\x91\x5c", [0x46ef] = "\x91\xd6", [0x46f0] = "\x8d\xc5",
-  [0x46f3] = "\x98\xf0", [0x46f8] = "\x8c\x8e", [0x46f9] = "\x97\x4c",
-  [0x46fb] = "\x95\xfc", [0x46fd] = "\x95\x9e", [0x46ff] = "\x9e\x4b",
-  [0x4704] = "\x8d\xf1", [0x4705] = "\x92\xbd", [0x4706] = "\x9e\x4c",
-  [0x4707] = "\x98\x4e", [0x470b] = "\x96\x5d", [0x470d] = "\x92\xa9",
-  [0x470e] = "\x9e\x4d", [0x470f] = "\x8a\xfa", [0x4716] = "\x9e\x4e",
-  [0x4717] = "\x9e\x4f", [0x4718] = "\x96\xd8", [0x471a] = "\x96\xa2",
-  [0x471b] = "\x96\x96", [0x471c] = "\x96\x7b", [0x471d] = "\x8e\x44",
-  [0x471e] = "\x9e\x51", [0x4721] = "\x8e\xe9", [0x4724] = "\x96\x70",
-  [0x4726] = "\x9e\x53", [0x4727] = "\x9e\x56", [0x4728] = "\x9e\x55",
-  [0x472a] = "\x8a\xf7", [0x472d] = "\x8b\x80", [0x472f] = "\x9e\x52",
-  [0x4731] = "\x9e\x54", [0x4736] = "\x9e\x57", [0x4739] = "\x90\x99",
-  [0x473e] = "\x97\x9b", [0x473f] = "\x88\xc7", [0x4740] = "\x8d\xde",
-  [0x4741] = "\x91\xba", [0x4743] = "\x8e\xdb", [0x4746] = "\x8f\xf1",
-  [0x4749] = "\x9e\x5a", [0x474c] = "\x93\x6d", [0x474e] = "\x9e\x58",
-  [0x474f] = "\x91\xa9", [0x4750] = "\x9e\x59", [0x4751] = "\x8f\xf0",
-  [0x4752] = "\x96\xdb", [0x4753] = "\x9e\x5b", [0x4754] = "\x9e\x5c",
-  [0x4755] = "\x97\x88", [0x475a] = "\x9e\x61", [0x475d] = "\x8d\x59",
-  [0x475f] = "\x94\x74", [0x4760] = "\x9e\x5e", [0x4761] = "\x93\x8c",
-  [0x4762] = "\x9d\xdc", [0x4763] = "\x9d\xe0", [0x4765] = "\x8b\x6e",
-  [0x4767] = "\x94\x66", [0x476c] = "\x9e\x60", [0x476e] = "\x8f\xbc",
-  [0x476f] = "\x94\xc2", [0x4775] = "\x9e\x66", [0x4777] = "\x94\xf8",
-  [0x4779] = "\x9e\x5d", [0x477b] = "\x9e\x63", [0x477c] = "\x9e\x62",
-  [0x4780] = "\x90\xcd", [0x4785] = "\x96\x8d", [0x4787] = "\x97\xd1",
-  [0x478a] = "\x96\x87", [0x478c] = "\x89\xca", [0x478d] = "\x8e\x7d",
-  [0x4790] = "\x98\x67", [0x4791] = "\x9e\x65", [0x4792] = "\x90\x95",
-  [0x4796] = "\x9e\x64", [0x4799] = "\x9e\x5f", [0x479f] = "\x8c\xcd",
-  [0x47a3] = "\x9e\x6b", [0x47a4] = "\x9e\x69", [0x47a6] = "\x89\xcb",
-  [0x47a7] = "\x9e\x67", [0x47a8] = "\x9e\x6d", [0x47a9] = "\x9e\x73",
-  [0x47b1] = "\x91\xc6", [0x47b4] = "\x95\xbf", [0x47b6] = "\x9e\x75",
-  [0x47ba] = "\x95\x41", [0x47be] = "\x9e\x74", [0x47bf] = "\x94\x90",
-  [0x47c0] = "\x96\x5e", [0x47c1] = "\x8a\xb9", [0x47c3] = "\x90\xf5",
-  [0x47c4] = "\x8f\x5f", [0x47c8] = "\x92\xd1", [0x47ca] = "\x97\x4d",
-  [0x47cd] = "\x9e\x70", [0x47ce] = "\x9e\x6f", [0x47d2] = "\x9e\x71",
-  [0x47d4] = "\x9e\x6e", [0x47d7] = "\x9e\x76", [0x47d9] = "\x9e\x6c",
-  [0x47dc] = "\x9e\x6a", [0x47de] = "\x9e\x72", [0x47df] = "\x9e\x68",
-  [0x47e1] = "\x92\x8c", [0x47e3] = "\x96\xf6", [0x47e4] = "\x8e\xc4",
-  [0x47e5] = "\x8d\xf2", [0x47eb] = "\x8d\xb8", [0x47ee] = "\x96\x8f",
-  [0x47ef] = "\x8a\x60", [0x47f2] = "\x92\xcc", [0x47f3] = "\x93\xc8",
-  [0x47f4] = "\x89\x68", [0x4803] = "\x90\xf0", [0x4806] = "\x90\xb2",
-  [0x4807] = "\x8c\x49", [0x480e] = "\x9e\x78", [0x4811] = "\x8d\x5a",
-  [0x4812] = "\x8a\x9c", [0x4819] = "\x9e\x7a", [0x481a] = "\x8a\x94",
-  [0x481b] = "\x9e\x81", [0x4822] = "\x9e\x7d", [0x4824] = "\x90\xf1",
-  [0x4828] = "\x8a\x6a", [0x4829] = "\x8d\xaa", [0x482c] = "\x8a\x69",
-  [0x482d] = "\x8d\xcd", [0x4830] = "\x9e\x7b", [0x4831] = "\x8c\x85",
-  [0x4832] = "\x8c\x6a", [0x4833] = "\x93\x8d", [0x4836] = "\x9e\x79",
-  [0x4838] = "\x88\xc4", [0x483d] = "\x9e\x7c", [0x483e] = "\x9e\x7e",
-  [0x4840] = "\x8b\xcb", [0x4841] = "\x8c\x4b", [0x4843] = "\x8a\xba",
-  [0x4844] = "\x8b\x6a", [0x4849] = "\x9e\x82", [0x484c] = "\x8d\xf7",
-  [0x484d] = "\x96\x91", [0x484f] = "\x8e\x56", [0x4853] = "\x9e\x83",
-  [0x4857] = "\x95\x4f", [0x4864] = "\x9e\x8f", [0x4866] = "\x89\xb1",
-  [0x4867] = "\x9e\x84", [0x486e] = "\x9e\x95", [0x486f] = "\x9e\x85",
-  [0x4871] = "\x97\xc0", [0x4873] = "\x9e\x8c", [0x4875] = "\x94\x7e",
-  [0x487d] = "\x9e\x94", [0x487f] = "\x9e\x87", [0x4883] = "\x88\xb2",
-  [0x4884] = "\x9e\x89", [0x4887] = "\x8d\x5b", [0x488b] = "\x9e\x8b",
-  [0x488d] = "\x9e\x8a", [0x488f] = "\x9e\x86", [0x4890] = "\x9e\x91",
-  [0x4892] = "\x8f\xbd", [0x4896] = "\x9a\xeb", [0x4897] = "\x8c\xe6",
-  [0x4898] = "\x97\x9c", [0x489d] = "\x9e\x88", [0x489f] = "\x92\xf2",
-  [0x48a0] = "\x8a\x42", [0x48a1] = "\x8d\xab", [0x48a3] = "\x9e\x80",
-  [0x48a5] = "\x9e\x90", [0x48a6] = "\x8a\x81", [0x48a9] = "\x9e\x8e",
-  [0x48aa] = "\x9e\x92", [0x48ac] = "\x93\x8e", [0x48b4] = "\x8a\xfc",
-  [0x48b6] = "\x9e\xb0", [0x48b9] = "\x96\xc7", [0x48ba] = "\x9e\x97",
-  [0x48bb] = "\x8a\xfb", [0x48bd] = "\x9e\x9e", [0x48c2] = "\x96\x5f",
-  [0x48c4] = "\x9e\x9f", [0x48c5] = "\x9e\xa1", [0x48c7] = "\x9e\xa5",
-  [0x48c8] = "\x9e\x99", [0x48ca] = "\x92\x49", [0x48cf] = "\x93\x8f",
-  [0x48d0] = "\x9e\xa9", [0x48d1] = "\x9e\x9c", [0x48d3] = "\x9e\xa6",
-  [0x48d7] = "\x9e\xa0", [0x48de] = "\x90\x58", [0x48df] = "\x9e\xaa",
-  [0x48e2] = "\x90\xb1", [0x48e9] = "\x9e\xa8", [0x48ea] = "\x8a\xbb",
-  [0x48f0] = "\x98\x6f", [0x48f1] = "\x9e\x96", [0x48f4] = "\x9e\xa4",
-  [0x48f5] = "\x88\xd6", [0x48f8] = "\x9e\x98", [0x48fb] = "\x96\xb8",
-  [0x48fc] = "\x9e\x9d", [0x48fd] = "\x90\x41", [0x48fe] = "\x92\xc5",
-  [0x48ff] = "\x9e\x93", [0x4902] = "\x9e\xa3", [0x4909] = "\x90\x9a",
-  [0x490a] = "\x9e\xad", [0x490b] = "\x8a\x91", [0x490c] = "\x8c\x9f",
-  [0x4911] = "\x9e\xaf", [0x4912] = "\x9e\x9a", [0x4913] = "\x9e\xae",
-  [0x4915] = "\x9e\xa7", [0x4916] = "\x9e\x9b", [0x4918] = "\x9e\xab",
-  [0x491a] = "\x9e\xac", [0x4920] = "\x9e\xbd", [0x4924] = "\x93\xcc",
-  [0x4926] = "\x9e\xa2", [0x4929] = "\x9e\xb9", [0x492d] = "\x9e\xbb",
-  [0x492f] = "\x92\xd6", [0x493a] = "\x97\x6b", [0x4943] = "\x95\x96",
-  [0x4944] = "\x9e\xb6", [0x4945] = "\x91\xc8", [0x4949] = "\x9e\xbc",
-  [0x494a] = "\x91\x5e", [0x494c] = "\x9e\xb3", [0x494d] = "\x9e\xc0",
-  [0x494e] = "\x9e\xbf", [0x4950] = "\x93\xed", [0x4951] = "\x9e\xbe",
-  [0x4952] = "\x93\xe8", [0x495a] = "\x9e\xc2", [0x495b] = "\x9e\xb5",
-  [0x495d] = "\x8b\xc6", [0x495e] = "\x9e\xb8", [0x495f] = "\x8f\x7c",
-  [0x4963] = "\x94\x80", [0x4964] = "\x9e\xba", [0x4965] = "\x8b\xc9",
-  [0x4967] = "\x9e\xb2", [0x4968] = "\x9e\xb4", [0x4969] = "\x9e\xb1",
-  [0x496c] = "\x98\x4f", [0x496d] = "\x8a\x79", [0x496e] = "\x9e\xb7",
-  [0x4971] = "\x9e\xc1", [0x4972] = "\x8a\x54", [0x497a] = "\x8d\xe5",
-  [0x497e] = "\x89\x7c", [0x4981] = "\x9e\xd2", [0x4984] = "\x98\x50",
-  [0x4985] = "\x9e\xd5", [0x498b] = "\x90\x59", [0x498c] = "\x9e\xd4",
-  [0x4990] = "\x9e\xd3", [0x4997] = "\x9e\xd0", [0x499e] = "\x9e\xc4",
-  [0x49a1] = "\x9e\xe1", [0x49a2] = "\x9e\xc3", [0x49a4] = "\x9e\xd6",
-  [0x49ab] = "\x9e\xce", [0x49ae] = "\x9e\xc9", [0x49af] = "\x9e\xc6",
-  [0x49b1] = "\x9e\xc7", [0x49b3] = "\x9e\xcf", [0x49b7] = "\xea\xa0",
-  [0x49ba] = "\x9e\xcc", [0x49bb] = "\x8d\x5c", [0x49bc] = "\x92\xc6",
-  [0x49bd] = "\x91\x84", [0x49be] = "\x9e\xca", [0x49c0] = "\x9e\xc5",
-  [0x49c3] = "\x9e\xc8", [0x49c8] = "\x97\x6c", [0x49c9] = "\x96\x8a",
-  [0x49cd] = "\x9e\xcd", [0x49ce] = "\x9e\xd7", [0x49d7] = "\x9e\xdf",
-  [0x49d8] = "\x9e\xd8", [0x49db] = "\x9e\xe5", [0x49dd] = "\x9e\xe3",
-  [0x49e2] = "\x9e\xde", [0x49e9] = "\x9e\xdd", [0x49eb] = "\x92\xce",
-  [0x49ed] = "\x91\x85", [0x49ef] = "\x9e\xdb", [0x49f2] = "\x9e\xd9",
-  [0x49f5] = "\x9e\xe0", [0x49fa] = "\x9e\xe6", [0x49fb] = "\x94\xf3",
-  [0x49fc] = "\x9e\xec", [0x4a02] = "\x9e\xe7", [0x4a03] = "\x9e\xea",
-  [0x4a04] = "\x9e\xe4", [0x4a07] = "\x92\x94", [0x4a09] = "\x95\x57",
-  [0x4a0b] = "\x9e\xda", [0x4a0e] = "\x9e\xe2", [0x4a0f] = "\x8f\xbe",
-  [0x4a11] = "\x96\xcd", [0x4a12] = "\x9e\xf6", [0x4a13] = "\x9e\xe9",
-  [0x4a19] = "\x8c\xa0", [0x4a1a] = "\x89\xa1", [0x4a1b] = "\x8a\x7e",
-  [0x4a1e] = "\x9e\xd1", [0x4a25] = "\x8f\xbf", [0x4a26] = "\x9e\xee",
-  [0x4a28] = "\x9e\xf5", [0x4a29] = "\x8e\xf7", [0x4a2a] = "\x8a\x92",
-  [0x4a2d] = "\x92\x4d", [0x4a34] = "\x9e\xeb", [0x4a37] = "\x9e\xf0",
-  [0x4a38] = "\x9e\xf4", [0x4a3b] = "\x8b\xb4", [0x4a48] = "\x8b\x6b",
-  [0x4a49] = "\x9e\xf2", [0x4a4f] = "\x8b\x40", [0x4a51] = "\x93\xc9",
-  [0x4a52] = "\x9e\xf1", [0x4a56] = "\x9e\xf3", [0x4a62] = "\x9e\xed",
-  [0x4a68] = "\x9e\xef", [0x4a6f] = "\x8a\x80", [0x4a70] = "\x92\x68",
-  [0x4a74] = "\x9e\xfa", [0x4a7d] = "\x9e\xf8", [0x4a7e] = "\x8c\xe7",
-  [0x4a80] = "\x9e\xf7", [0x4a87] = "\x9f\x40", [0x4a8c] = "\x9e\x77",
-  [0x4a90] = "\x9e\xf9", [0x4a92] = "\x9e\xfb", [0x4a93] = "\x9e\xfc",
-  [0x4a9a] = "\x9f\x4b", [0x4a9c] = "\x9f\x47", [0x4a9e] = "\x9e\x8d",
-  [0x4aa3] = "\x9f\x46", [0x4aa8] = "\x9f\x45", [0x4aab] = "\x9f\x42",
-  [0x4ab1] = "\x9e\xe8", [0x4ab2] = "\x9f\x44", [0x4ab3] = "\x9f\x43",
-  [0x4ac1] = "\x9f\x49", [0x4ac3] = "\x98\x45", [0x4aca] = "\x9f\x4c",
-  [0x4acb] = "\x8b\xf9", [0x4ace] = "\x9f\x48", [0x4acf] = "\x9f\x4a",
-  [0x4ad8] = "\x94\xa5", [0x4ada] = "\x9f\x4d", [0x4aea] = "\x9f\x51",
-  [0x4aeb] = "\x9f\x4e", [0x4af4] = "\x97\x93", [0x4af5] = "\x9f\x4f",
-  [0x4afa] = "\x9e\xdc", [0x4b02] = "\x9f\x52", [0x4b06] = "\x9f\x53",
-  [0x4b0d] = "\x89\x54", [0x4b0f] = "\x9f\x55", [0x4b10] = "\x8c\x87",
-  [0x4b11] = "\x8e\x9f", [0x4b13] = "\x8b\xd3", [0x4b17] = "\x89\xa2",
-  [0x4b22] = "\x97\x7e", [0x4b27] = "\x9f\x57", [0x4b28] = "\x9f\x56",
-  [0x4b29] = "\x9f\x59", [0x4b2a] = "\x8b\x5c", [0x4b2d] = "\x8b\xd4",
-  [0x4b2e] = "\x8a\xbc", [0x4b33] = "\x9f\x5c", [0x4b37] = "\x9f\x5b",
-  [0x4b39] = "\x9f\x5d", [0x4b3c] = "\x89\xcc", [0x4b3e] = "\x92\x56",
-  [0x4b40] = "\x9f\x5e", [0x4b43] = "\x8a\xbd", [0x4b44] = "\x9f\x60",
-  [0x4b49] = "\x9f\x5f", [0x4b4b] = "\x9f\x61", [0x4b4f] = "\x9f\x62",
-  [0x4b51] = "\x9f\x63", [0x4b52] = "\x8e\x7e", [0x4b53] = "\x90\xb3",
-  [0x4b54] = "\x8d\x9f", [0x4b56] = "\x95\x90", [0x4b59] = "\x95\xe0",
-  [0x4b5a] = "\x98\x63", [0x4b5f] = "\x8e\x95", [0x4b63] = "\x8d\xce",
-  [0x4b64] = "\x97\xf0", [0x4b68] = "\x9f\x64", [0x4b69] = "\x9f\x65",
-  [0x4b6b] = "\x8e\x80", [0x4b6f] = "\x9f\x66", [0x4b70] = "\x9f\x67",
-  [0x4b73] = "\x9f\x69", [0x4b74] = "\x9f\x68", [0x4b76] = "\x96\x77",
-  [0x4b79] = "\x8f\x7d", [0x4b7a] = "\x8e\xea", [0x4b7b] = "\x8e\x63",
-  [0x4b7d] = "\x9f\x6a", [0x4b85] = "\x9f\x6c", [0x4b86] = "\x90\x42",
-  [0x4b88] = "\x9f\x6b", [0x4b8e] = "\x9f\x6d", [0x4b94] = "\x9f\x6e",
-  [0x4b9a] = "\x9f\x6f", [0x4b9b] = "\x9f\x70", [0x4b9f] = "\x9f\x71",
-  [0x4ba1] = "\x9f\x73", [0x4ba2] = "\x9f\x72", [0x4ba3] = "\x9f\x74",
-  [0x4ba4] = "\x89\xa3", [0x4ba5] = "\x92\x69", [0x4ba7] = "\x9f\x75",
-  [0x4baa] = "\x8e\x45", [0x4bab] = "\x8a\x6b", [0x4bac] = "\x9f\x76",
-  [0x4baf] = "\x93\x61", [0x4bb0] = "\x9a\xca", [0x4bb5] = "\x8b\x42",
-  [0x4bb6] = "\x9f\x77", [0x4bbb] = "\x9f\x78", [0x4bbd] = "\x95\xea",
-  [0x4bbe] = "\x96\x88", [0x4bc2] = "\x93\xc5", [0x4bc3] = "\x9f\x79",
-  [0x4bc4] = "\x94\xe4", [0x4bc8] = "\x94\xf9", [0x4bcb] = "\x96\xd1",
-  [0x4bcf] = "\x9f\x7a", [0x4bdb] = "\x9f\x7c", [0x4bdc] = "\x9f\x7b",
-  [0x4bdf] = "\x9f\x7e", [0x4be3] = "\x9f\x7d", [0x4bf8] = "\x9f\x81",
-  [0x4bff] = "\x8e\x81", [0x4c01] = "\x96\xaf", [0x4c03] = "\x9f\x82",
-  [0x4c04] = "\x9f\x83", [0x4c07] = "\x8b\x43", [0x4c0b] = "\x9f\x84",
-  [0x4c13] = "\x9f\x86", [0x4c14] = "\x9f\x85", [0x4c24] = "\x90\x85",
-  [0x4c27] = "\x95\x58", [0x4c28] = "\x89\x69", [0x4c2e] = "\x94\xc3",
-  [0x4c30] = "\x92\xf3", [0x4c31] = "\x8f\x60", [0x4c32] = "\x8b\x81",
-  [0x4c3e] = "\x94\xc4", [0x4c40] = "\x8e\xac", [0x4c45] = "\x9f\x88",
-  [0x4c47] = "\x8a\xbe", [0x4c4a] = "\x89\x98", [0x4c4d] = "\x93\xf0",
-  [0x4c4e] = "\x9f\x87", [0x4c4f] = "\x8d\x5d", [0x4c50] = "\x92\x72",
-  [0x4c52] = "\x9f\x89", [0x4c58] = "\x9f\x91", [0x4c5a] = "\x9f\x8a",
-  [0x4c60] = "\x91\xbf", [0x4c62] = "\x8b\x82", [0x4c63] = "\x9f\x92",
-  [0x4c6a] = "\x8c\x88", [0x4c6d] = "\x8b\x44", [0x4c6e] = "\x9f\x90",
-  [0x4c71] = "\x9f\x8e", [0x4c72] = "\x9f\x8b", [0x4c73] = "\x97\x80",
-  [0x4c78] = "\x92\xbe", [0x4c7c] = "\x93\xd7", [0x4c7d] = "\x9f\x8c",
-  [0x4c80] = "\x9f\x94", [0x4c82] = "\x9f\x93", [0x4c83] = "\x8c\x42",
-  [0x4c86] = "\x89\xab", [0x4c89] = "\x8d\xb9", [0x4c8a] = "\x9f\x8d",
-  [0x4c8b] = "\x9f\x8f", [0x4c91] = "\x96\x76", [0x4c92] = "\x91\xf2",
-  [0x4c9b] = "\x96\x97", [0x4c9e] = "\x9f\x9c", [0x4ca1] = "\x9f\x9d",
-  [0x4ca3] = "\x89\xcd", [0x4ca8] = "\x95\xa6", [0x4ca9] = "\x96\xfb",
-  [0x4caa] = "\x9f\x9f", [0x4cab] = "\x8e\xa1", [0x4cac] = "\x8f\xc0",
-  [0x4cad] = "\x9f\x98", [0x4cae] = "\x9f\x9e", [0x4caf] = "\x89\x88",
-  [0x4cb1] = "\x8b\xb5", [0x4cb4] = "\x9f\x95", [0x4cb5] = "\x9f\x9a",
-  [0x4cb9] = "\x90\xf2", [0x4cba] = "\x94\x91", [0x4cbc] = "\x94\xe5",
-  [0x4cc3] = "\x9f\x97", [0x4cc5] = "\x96\x40", [0x4cc7] = "\x9f\x99",
-  [0x4cc9] = "\x9f\xa2", [0x4ccb] = "\x9f\xa0", [0x4ccd] = "\x9f\x9b",
-  [0x4cd1] = "\x96\x41", [0x4cd2] = "\x94\x67", [0x4cd3] = "\x8b\x83",
-  [0x4cd5] = "\x93\x44", [0x4cd8] = "\x92\x8d", [0x4cda] = "\x9f\xa3",
-  [0x4cdf] = "\x9f\xa1", [0x4ce0] = "\x91\xd7", [0x4ce1] = "\x9f\x96",
-  [0x4ce3] = "\x89\x6a", [0x4cfb] = "\x97\x6d", [0x4cfc] = "\x9f\xae",
-  [0x4d02] = "\x9f\xad", [0x4d07] = "\x90\xf4", [0x4d09] = "\x9f\xaa",
-  [0x4d0b] = "\x97\x8c", [0x4d0e] = "\x93\xb4", [0x4d0f] = "\x9f\xa4",
-  [0x4d15] = "\x92\xc3", [0x4d19] = "\x89\x6b", [0x4d1a] = "\x8d\x5e",
-  [0x4d1b] = "\x9f\xa7", [0x4d22] = "\x8f\x46", [0x4d23] = "\x9f\xac",
-  [0x4d25] = "\x9f\xab", [0x4d26] = "\x9f\xa6", [0x4d28] = "\x9f\xa9",
-  [0x4d2b] = "\x8a\x88", [0x4d2d] = "\x9f\xa8", [0x4d2e] = "\x94\x68",
-  [0x4d31] = "\x97\xac", [0x4d34] = "\x8f\xf2", [0x4d35] = "\x90\xf3",
-  [0x4d49] = "\x9f\xb4", [0x4d4a] = "\x9f\xb2", [0x4d4c] = "\x95\x6c",
-  [0x4d53] = "\x9f\xaf", [0x4d54] = "\x9f\xb1", [0x4d56] = "\x89\x59",
-  [0x4d59] = "\x8d\x5f", [0x4d5a] = "\x98\x51", [0x4d5c] = "\x8a\x5c",
-  [0x4d5e] = "\x95\x82", [0x4d64] = "\x97\x81", [0x4d67] = "\x8a\x43",
-  [0x4d68] = "\x90\x5a", [0x4d69] = "\x9f\xb3", [0x4d75] = "\x9f\xb8",
-  [0x4d78] = "\x8f\xc1", [0x4d7c] = "\x97\x4f", [0x4d7e] = "\x9f\xb5",
-  [0x4d83] = "\x9f\xb0", [0x4d85] = "\x9f\xb6", [0x4d89] = "\x97\xdc",
-  [0x4d8b] = "\x93\x93", [0x4d8c] = "\x93\xc0", [0x4d9f] = "\x8a\x55",
-  [0x4da2] = "\x89\x74", [0x4da5] = "\x9f\xbc", [0x4da8] = "\x9f\xbf",
-  [0x4dac] = "\x97\xc1", [0x4db0] = "\x97\x84", [0x4db5] = "\x9f\xc6",
-  [0x4db6] = "\x9f\xc0", [0x4db7] = "\x9f\xbd", [0x4dbb] = "\x97\xd2",
-  [0x4dbc] = "\x9f\xc3", [0x4dc1] = "\x8f\x69", [0x4dc2] = "\x9f\xc5",
-  [0x4dc5] = "\x9f\xca", [0x4dc8] = "\x93\x91", [0x4dc9] = "\x9f\xc8",
-  [0x4dce] = "\x9f\xc2", [0x4dd1] = "\x92\x57", [0x4dd4] = "\x9f\xc9",
-  [0x4dd6] = "\x9f\xbe", [0x4dd8] = "\x9f\xc4", [0x4dda] = "\x9f\xcb",
-  [0x4ddb] = "\x88\xfa", [0x4ddc] = "\x9f\xc1", [0x4dde] = "\x9f\xcc",
-  [0x4de1] = "\x90\x5b", [0x4de3] = "\x8f\x7e", [0x4de5] = "\x95\xa3",
-  [0x4de7] = "\x8d\xac", [0x4de9] = "\x9f\xb9", [0x4dea] = "\x9f\xc7",
-  [0x4deb] = "\x93\x59", [0x4df5] = "\x90\xb4", [0x4df7] = "\x8a\x89",
-  [0x4df8] = "\x8d\xcf", [0x4df9] = "\x8f\xc2", [0x4dfa] = "\x9f\xbb",
-  [0x4dfb] = "\x8f\x61", [0x4e03] = "\x8c\x6b", [0x4e05] = "\x9f\xba",
-  [0x4e09] = "\x9f\xd0", [0x4e0a] = "\x8f\x8d", [0x4e0b] = "\x8c\xb8",
-  [0x4e0d] = "\x9f\xdf", [0x4e0f] = "\x9f\xd9", [0x4e10] = "\x8b\x94",
-  [0x4e11] = "\x93\x6e", [0x4e13] = "\x9f\xd4", [0x4e14] = "\x9f\xdd",
-  [0x4e15] = "\x88\xad", [0x4e16] = "\x89\x51", [0x4e19] = "\x89\xb7",
-  [0x4e1b] = "\x9f\xd6", [0x4e1c] = "\x91\xaa", [0x4e1d] = "\x9f\xcd",
-  [0x4e1e] = "\x9f\xcf", [0x4e1f] = "\x8d\x60", [0x4e28] = "\x9f\xe0",
-  [0x4e2a] = "\x9f\xdb", [0x4e2e] = "\x9f\xd3", [0x4e33] = "\x9f\xda",
-  [0x4e3a] = "\x96\xa9", [0x4e3d] = "\x9f\xd8", [0x4e3e] = "\x9f\xdc",
-  [0x4e46] = "\x8c\xce", [0x4e48] = "\x8f\xc3", [0x4e4b] = "\x92\x58",
-  [0x4e4f] = "\x9f\xd2", [0x4e57] = "\x97\x4e", [0x4e5b] = "\x9f\xd5",
-  [0x4e5e] = "\x9f\xce", [0x4e5f] = "\x93\x92", [0x4e62] = "\x9f\xd1",
-  [0x4e66] = "\x9f\xd7", [0x4e6e] = "\x98\x70", [0x4e6f] = "\x8e\xbc",
-  [0x4e70] = "\x96\x9e", [0x4e72] = "\x9f\xe1", [0x4e7c] = "\x94\xac",
-  [0x4e7f] = "\x9f\xed", [0x4e80] = "\x8c\xb9", [0x4e86] = "\x8f\x80",
-  [0x4e88] = "\x9f\xe3", [0x4e8c] = "\x97\xad", [0x4e8d] = "\x8d\x61",
-  [0x4e8f] = "\x9f\xf0", [0x4e92] = "\x88\xec", [0x4e95] = "\x9f\xee",
-  [0x4e9a] = "\x9f\xe2", [0x4e9f] = "\x9f\xe8", [0x4ea2] = "\x9f\xea",
-  [0x4ea6] = "\x97\x6e", [0x4ea7] = "\x9f\xe5", [0x4eaa] = "\x93\x4d",
-  [0x4ead] = "\x9f\xe7", [0x4eb2] = "\x9f\xef", [0x4eb4] = "\x9f\xe9",
-  [0x4eb5] = "\x96\xc5", [0x4eb9] = "\x9f\xe4", [0x4ebb] = "\x8e\xa0",
-  [0x4ebc] = "\x9f\xfc", [0x4ec1] = "\x8a\x8a", [0x4ec3] = "\x9f\xe6",
-  [0x4ec4] = "\x9f\xeb", [0x4ec5] = "\x9f\xec", [0x4ecd] = "\x91\xea",
-  [0x4ece] = "\x91\xd8", [0x4edc] = "\x9f\xf4", [0x4edf] = "\x9f\xfa",
-  [0x4ee2] = "\x9f\xf8", [0x4ee4] = "\x93\x48", [0x4ee7] = "\xe0\x42",
-  [0x4ee8] = "\x9f\xf5", [0x4eee] = "\x9f\xf6", [0x4eef] = "\x9f\xde",
-  [0x4ef1] = "\x8b\x99", [0x4ef2] = "\x95\x59", [0x4ef6] = "\x8e\xbd",
-  [0x4ef9] = "\x8d\x97", [0x4eff] = "\x98\x52", [0x4f01] = "\x9f\xf2",
-  [0x4f03] = "\xe0\x41", [0x4f04] = "\x89\x89", [0x4f05] = "\x91\x86",
-  [0x4f10] = "\x94\x99", [0x4f12] = "\x8a\xbf", [0x4f13] = "\x97\xf8",
-  [0x4f1b] = "\x96\x9f", [0x4f1c] = "\x92\xd0", [0x4f21] = "\x9f\xf9",
-  [0x4f22] = "\x9f\xfb", [0x4f28] = "\x91\x51", [0x4f2e] = "\xe0\x40",
-  [0x4f2f] = "\x9f\xf7", [0x4f31] = "\x9f\xf1", [0x4f35] = "\x8a\xc1",
-  [0x4f44] = "\x8c\x89", [0x4f48] = "\xe0\x4e", [0x4f4b] = "\xe0\x49",
-  [0x4f4c] = "\x90\xf6", [0x4f4f] = "\x8a\x83", [0x4f54] = "\x8f\x81",
-  [0x4f56] = "\xe0\x52", [0x4f5d] = "\xe0\x4b", [0x4f5e] = "\x92\xaa",
-  [0x4f5f] = "\xe0\x48", [0x4f60] = "\x92\xd7", [0x4f64] = "\xe0\x6b",
-  [0x4f68] = "\xe0\x45", [0x4f6a] = "\xe0\x44", [0x4f6c] = "\xe0\x4d",
-  [0x4f70] = "\xe0\x47", [0x4f71] = "\xe0\x46", [0x4f72] = "\xe0\x4c",
-  [0x4f74] = "\x90\x9f", [0x4f76] = "\xe0\x43", [0x4f7e] = "\xe0\x4f",
-  [0x4f81] = "\xe0\x50", [0x4f87] = "\x8a\xc0", [0x4f91] = "\xe0\x55",
-  [0x4f93] = "\xe0\x54", [0x4f94] = "\xe0\x56", [0x4f9a] = "\xe0\x59",
-  [0x4fa1] = "\x93\x62", [0x4fa3] = "\xe0\x53", [0x4fa9] = "\xe0\x57",
-  [0x4fb0] = "\x8c\x83", [0x4fb1] = "\x91\xf7", [0x4fb2] = "\xe0\x51",
-  [0x4fb3] = "\x94\x5a", [0x4fb6] = "\xe0\x58", [0x4fc4] = "\xe0\x5d",
-  [0x4fc5] = "\xe0\x5b", [0x4fc8] = "\xe0\x5e", [0x4fcb] = "\xe0\x61",
-  [0x4fcf] = "\xe0\x5a", [0x4fd0] = "\x8d\x8a", [0x4fd1] = "\x94\x47",
-  [0x4fd4] = "\x9f\xb7", [0x4fdb] = "\x97\x94", [0x4fdc] = "\xe0\x5c",
-  [0x4fde] = "\xe0\x60", [0x4fdf] = "\x91\xf3", [0x4fe1] = "\xe0\x5f",
-  [0x4fe3] = "\xe0\x4a", [0x4fe6] = "\xe8\x89", [0x4fea] = "\xe0\x64",
-  [0x4fee] = "\xe0\x68", [0x4ff1] = "\xe0\x66", [0x4ff9] = "\xe0\x62",
-  [0x4ffb] = "\xe0\x63", [0x4fff] = "\xe0\x67", [0x5001] = "\xe0\x65",
-  [0x5005] = "\x95\x6d", [0x5008] = "\xe0\x6d", [0x500a] = "\xe0\x6a",
-  [0x500b] = "\xe0\x69", [0x500d] = "\xe0\x6c", [0x500e] = "\x93\xd2",
-  [0x500f] = "\xe0\x6e", [0x5016] = "\x92\x95", [0x5017] = "\x91\xeb",
-  [0x501c] = "\x90\xa3", [0x5020] = "\xe0\x6f", [0x5022] = "\xe0\x71",
-  [0x502e] = "\xe0\x70", [0x503c] = "\x9f\xf3", [0x5041] = "\xe0\x72",
-  [0x5048] = "\x93\xe5", [0x5053] = "\xe0\x73", [0x505b] = "\x89\xce",
-  [0x505f] = "\x93\x94", [0x5060] = "\x8a\x44", [0x5068] = "\x8b\x84",
-  [0x506c] = "\x8e\xdc", [0x506d] = "\x8d\xd0", [0x5079] = "\x98\x46",
-  [0x507a] = "\x90\x86", [0x507e] = "\x89\x8a", [0x5082] = "\xe0\x75",
-  [0x5089] = "\xe0\x74", [0x509c] = "\xe0\x78", [0x509d] = "\x92\x59",
-  [0x509e] = "\xe0\x7b", [0x509f] = "\xe0\x76", [0x50a3] = "\xe0\x7a",
-  [0x50a8] = "\xe0\x79", [0x50a9] = "\x93\x5f", [0x50aa] = "\x88\xd7",
-  [0x50b8] = "\x97\xf3", [0x50bb] = "\xe0\x7d", [0x50bf] = "\x89\x47",
-  [0x50c9] = "\xe0\x80", [0x50cd] = "\xe0\x7e", [0x50cf] = "\xe0\x7c",
-  [0x50e1] = "\xe0\x77", [0x50e9] = "\x96\x42", [0x50ed] = "\xe0\x82",
-  [0x50f9] = "\xe0\x81", [0x5104] = "\x89\x8b", [0x5109] = "\xe0\x84",
-  [0x510a] = "\x95\xb0", [0x510c] = "\xe0\x83", [0x5111] = "\x96\xb3",
-  [0x5116] = "\x8f\xc5", [0x5126] = "\x91\x52", [0x512c] = "\x8f\xc4",
-  [0x5139] = "\x97\xf9", [0x513c] = "\xe0\x8a", [0x513e] = "\x90\xf7",
-  [0x5145] = "\xe0\x86", [0x5146] = "\xe0\x8b", [0x5149] = "\x89\x8c",
-  [0x5152] = "\xe0\x89", [0x5154] = "\x94\x81", [0x5155] = "\xe0\x85",
-  [0x5156] = "\xe0\x88", [0x5157] = "\x8f\xc6", [0x5159] = "\x94\xcf",
-  [0x515c] = "\xe0\x8c", [0x515e] = "\x8e\xcf", [0x516d] = "\x90\xf8",
-  [0x5174] = "\xe0\x8f", [0x5178] = "\xe0\x87", [0x517a] = "\x8c\x46",
-  [0x517f] = "\xe0\x8d", [0x5184] = "\x97\x6f", [0x5185] = "\xe0\x90",
-  [0x5189] = "\xea\xa4", [0x518f] = "\x8f\x6e", [0x5198] = "\xe0\x91",
-  [0x519c] = "\xe0\x92", [0x51a1] = "\x94\x4d", [0x51a9] = "\xe0\x94",
-  [0x51ae] = "\xe0\x95", [0x51b3] = "\x94\x52", [0x51b8] = "\x93\x95",
-  [0x51b9] = "\xe0\x97", [0x51be] = "\xe0\x99", [0x51c0] = "\x97\xd3",
-  [0x51c2] = "\xe0\x96", [0x51c4] = "\xe0\x98", [0x51c5] = "\x89\x8d",
-  [0x51c7] = "\xe0\x93", [0x51cf] = "\x9a\x7a", [0x51d0] = "\xe0\x9a",
-  [0x51d5] = "\x91\x87", [0x51d6] = "\x8e\x57", [0x51d7] = "\xe0\x9c",
-  [0x51dc] = "\xe0\x9b", [0x51dd] = "\x90\x43", [0x51de] = "\x99\xd7",
-  [0x51e5] = "\xe0\x9d", [0x51e9] = "\xe0\x9f", [0x51eb] = "\xe0\x8e",
-  [0x51ec] = "\xe0\x9e", [0x51ef] = "\xe0\xa0", [0x51f6] = "\x94\x9a",
-  [0x51fd] = "\xe0\xa1", [0x5200] = "\xe0\xa2", [0x520b] = "\xe0\xa3",
-  [0x5218] = "\xe0\xa4", [0x521a] = "\x92\xdc", [0x521c] = "\xe0\xa6",
-  [0x521d] = "\xe0\xa5", [0x5220] = "\xe0\xa7", [0x5222] = "\xe0\xa8",
-  [0x5225] = "\x8e\xdd", [0x5226] = "\x95\x83", [0x522a] = "\x96\xea",
-  [0x522b] = "\xe0\xa9", [0x522c] = "\xe0\xaa", [0x522d] = "\x91\x75",
-  [0x522e] = "\x8e\xa2", [0x522f] = "\xe0\xab", [0x5230] = "\xe0\xac",
-  [0x5236] = "\xe0\xad", [0x5237] = "\x95\xd0", [0x5238] = "\x94\xc5",
-  [0x523b] = "\xe0\xae", [0x523c] = "\x94\x76", [0x5242] = "\x92\xab",
-  [0x5248] = "\xe0\xaf", [0x5249] = "\x89\xe5", [0x524b] = "\x8b\x8d",
-  [0x524d] = "\x96\xc4", [0x524f] = "\x96\xb4", [0x5251] = "\x89\xb2",
-  [0x5252] = "\x98\x53", [0x5257] = "\x96\x71", [0x5259] = "\x95\xa8",
-  [0x5262] = "\x90\xb5", [0x5264] = "\xe0\xb0", [0x5269] = "\x93\xc1",
-  [0x526d] = "\x8c\xa1", [0x526e] = "\xe0\xb1", [0x5270] = "\x8d\xd2",
-  [0x5271] = "\xe0\xb3", [0x5272] = "\xe0\xb2", [0x5277] = "\xe0\xb4",
-  [0x5282] = "\xe0\xb5", [0x5286] = "\xe0\xb6", [0x5290] = "\x8b\x5d",
-  [0x5292] = "\xe0\xb7", [0x5297] = "\xe0\xb8", [0x529c] = "\x8c\xa2",
-  [0x529f] = "\x94\xc6", [0x52a2] = "\xe0\xba", [0x52a6] = "\x8f\xf3",
-  [0x52a9] = "\xe0\xb9", [0x52b2] = "\x8b\xb6", [0x52b3] = "\xe0\xbb",
-  [0x52b4] = "\xe0\xbd", [0x52b6] = "\xe0\xbc", [0x52be] = "\xe0\xbe",
-  [0x52c0] = "\x8c\xcf", [0x52c2] = "\xe0\xbf", [0x52c7] = "\x8b\xe7",
-  [0x52c9] = "\x91\x5f", [0x52cb] = "\x8d\x9d", [0x52d0] = "\xe0\xc1",
-  [0x52d1] = "\xe0\xc2", [0x52d2] = "\xe0\xc0", [0x52d9] = "\x8e\xeb",
-  [0x52dc] = "\x93\xc6", [0x52dd] = "\x8b\xb7", [0x52e7] = "\xe0\xc4",
-  [0x52e8] = "\x92\x4b", [0x52e9] = "\xe0\xc3", [0x52ec] = "\x98\x54",
-  [0x52ed] = "\x94\x82", [0x52fa] = "\xe0\xc7", [0x5306] = "\xe0\xc9",
-  [0x5307] = "\xe0\xc6", [0x530b] = "\x96\xd2", [0x530c] = "\xe0\xc8",
-  [0x530d] = "\xe0\xca", [0x530f] = "\x97\xc2", [0x5315] = "\xe0\xce",
-  [0x5319] = "\xe0\xcd", [0x531a] = "\x92\x96", [0x531b] = "\x94\x4c",
-  [0x531e] = "\x8c\xa3", [0x531f] = "\xe0\xcc", [0x5324] = "\xe0\xcb",
-  [0x5326] = "\x97\x50", [0x5327] = "\x97\x51", [0x532e] = "\xe0\xcf",
-  [0x532f] = "\x89\x8e", [0x5334] = "\x8d\x96", [0x5335] = "\x8e\x82",
-  [0x533e] = "\xe0\xd0", [0x533f] = "\xe0\xd1", [0x5347] = "\xe0\xd3",
-  [0x5353] = "\x8f\x62", [0x5358] = "\xe0\xd5", [0x535a] = "\xe0\xd4",
-  [0x5360] = "\xe0\xd6", [0x5362] = "\x8a\x6c", [0x5365] = "\xe0\xd8",
-  [0x5368] = "\xe0\xd7", [0x536a] = "\xe0\xda", [0x536b] = "\xe0\xd9",
-  [0x5374] = "\x8c\xba", [0x5377] = "\x97\xa6", [0x5379] = "\x8b\xca",
-  [0x537b] = "\x89\xa4", [0x5386] = "\x8b\xe8", [0x5399] = "\x8a\xdf",
-  [0x53a2] = "\x97\xe6", [0x53a3] = "\xe0\xdc", [0x53ab] = "\xe0\xde",
-  [0x53b0] = "\xe0\xdf", [0x53b2] = "\x89\xcf", [0x53b8] = "\xe0\xdb",
-  [0x53ba] = "\x8e\x58", [0x53bd] = "\x92\xbf", [0x53be] = "\xe0\xdd",
-  [0x53ce] = "\xe0\xe2", [0x53d0] = "\x8e\xec", [0x53d5] = "\xe0\xe0",
-  [0x53da] = "\x8c\x5d", [0x53dd] = "\x94\xc7", [0x53de] = "\xe0\xe1",
-  [0x53e1] = "\xe0\xfc", [0x53e8] = "\xe0\xe7", [0x53ee] = "\x8c\xbb",
-  [0x53f3] = "\x8b\x85", [0x53f5] = "\xe0\xe4", [0x53f6] = "\x97\x9d",
-  [0x53f9] = "\x97\xae", [0x5412] = "\x91\xf4", [0x5415] = "\xe0\xe6",
-  [0x5422] = "\xe0\xe8", [0x5423] = "\x97\xd4", [0x5424] = "\x8b\xd5",
-  [0x5425] = "\x94\xfa", [0x5426] = "\x94\x69", [0x542a] = "\xe0\xe9",
-  [0x542f] = "\xe0\xeb", [0x5431] = "\xe0\xee", [0x5445] = "\xe0\xea",
-  [0x5449] = "\xe0\xed", [0x544a] = "\x8c\xe8", [0x544b] = "\x89\x6c",
-  [0x544c] = "\xe0\xef", [0x544e] = "\x90\x90", [0x544f] = "\xe0\xec",
-  [0x5450] = "\x97\xda", [0x5453] = "\xe0\xf2", [0x5454] = "\xea\xa2",
-  [0x5459] = "\xe0\xf0", [0x545a] = "\xe0\xf3", [0x545f] = "\xe0\xe5",
-  [0x5460] = "\xe0\xf1", [0x5463] = "\x8d\xba", [0x5466] = "\xe0\xf4",
-  [0x546e] = "\xe0\xf5", [0x5473] = "\x97\x9e", [0x547b] = "\xe0\xf6",
-  [0x548e] = "\xe0\xf7", [0x5492] = "\xe0\xe3", [0x5497] = "\xe0\xf8",
-  [0x54a0] = "\x8a\xc2", [0x54ad] = "\x8e\xa3", [0x54ba] = "\xe0\xf9",
-  [0x54bf] = "\xe0\xfa", [0x54c4] = "\xe0\xfb", [0x54cc] = "\x89\x5a",
-  [0x54d0] = "\xe1\x40", [0x54d2] = "\x95\x5a", [0x54d3] = "\xe1\x41",
-  [0x54d6] = "\x8a\xa2", [0x54d7] = "\xe1\x42", [0x54d9] = "\xe1\x43",
-  [0x54de] = "\xe1\x44", [0x54e0] = "\xe1\x46", [0x54e1] = "\xe1\x47",
-  [0x54e2] = "\xe1\x45", [0x54e6] = "\x95\x72", [0x54e7] = "\xe1\x49",
-  [0x54e8] = "\xe1\x48", [0x54f3] = "\xe1\x4b", [0x54f4] = "\xe1\x4a",
-  [0x54f5] = "\xe1\x4c", [0x54fc] = "\xe1\x4d", [0x54fd] = "\xe1\x4f",
-  [0x54fe] = "\xe1\x4e", [0x5501] = "\x8d\x99", [0x5503] = "\xe1\x51",
-  [0x5505] = "\xe1\x50", [0x5508] = "\x8a\xc3", [0x550a] = "\x90\x72",
-  [0x550c] = "\x93\x5b", [0x550e] = "\xe1\x52", [0x550f] = "\x90\xb6",
-  [0x5513] = "\x8e\x59", [0x5515] = "\x89\x99", [0x5516] = "\xe1\x53",
-  [0x5518] = "\x97\x70", [0x551b] = "\x95\xe1", [0x551c] = "\xe1\x54",
-  [0x5520] = "\x93\x63", [0x5521] = "\x97\x52", [0x5522] = "\x8d\x62",
-  [0x5523] = "\x90\x5c", [0x5527] = "\x92\x6a", [0x5528] = "\x99\xb2",
-  [0x552a] = "\x92\xac", [0x552b] = "\x89\xe6", [0x552c] = "\xe1\x55",
-  [0x5534] = "\xe1\x56", [0x5536] = "\xe1\x5b", [0x5539] = "\xe1\x59",
-  [0x553a] = "\xe1\x58", [0x553b] = "\x9d\xc0", [0x553c] = "\x8a\x45",
-  [0x553d] = "\xe1\x57", [0x553f] = "\x88\xd8", [0x5541] = "\x94\xa8",
-  [0x5544] = "\x94\xc8", [0x5549] = "\x97\xaf", [0x554a] = "\xe1\x5c",
-  [0x554b] = "\xe1\x5a", [0x554c] = "\x92\x7b", [0x554d] = "\x90\xa4",
-  [0x5550] = "\x94\xa9", [0x5552] = "\x95\x4c", [0x5554] = "\xe1\x5e",
-  [0x5555] = "\x97\xaa", [0x5556] = "\x8c\x6c", [0x5557] = "\xe1\x5f",
-  [0x5559] = "\xe1\x5d", [0x555a] = "\x94\xd4", [0x555b] = "\xe1\x60",
-  [0x555d] = "\xe1\x61", [0x5560] = "\x88\xd9", [0x5563] = "\x8f\xf4",
-  [0x5564] = "\xe1\x66", [0x5566] = "\xe1\x63", [0x5567] = "\x93\xeb",
-  [0x5568] = "\xe1\x62", [0x556f] = "\x8b\x45", [0x5572] = "\xe1\x69",
-  [0x5576] = "\xe1\x64", [0x5577] = "\xe1\x65", [0x5579] = "\xe1\x68",
-  [0x557a] = "\xe1\x67", [0x557b] = "\x95\x44", [0x557e] = "\x91\x61",
-  [0x557f] = "\x91\x60", [0x5581] = "\x8b\x5e", [0x5584] = "\xe1\x6a",
-  [0x558a] = "\xe1\x6b", [0x558d] = "\xe1\x6c", [0x5593] = "\xe1\x6e",
-  [0x5595] = "\xe1\x6d", [0x559b] = "\x89\x75", [0x55a1] = "\xe1\x76",
-  [0x55a2] = "\x94\xe6", [0x55a3] = "\xe1\x70", [0x55a5] = "\xe1\x72",
-  [0x55a8] = "\xe1\x74", [0x55a9] = "\x90\x5d", [0x55ac] = "\xe1\x75",
-  [0x55ad] = "\xe1\x73", [0x55ae] = "\x8e\xbe", [0x55b2] = "\xe1\x6f",
-  [0x55b3] = "\xe1\x71", [0x55b5] = "\x95\x61", [0x55b7] = "\x8f\xc7",
-  [0x55ba] = "\xe1\x78", [0x55bd] = "\xe1\x77", [0x55c2] = "\xe1\x79",
-  [0x55c4] = "\x8e\xa4", [0x55c5] = "\x8d\xad", [0x55c8] = "\x93\x97",
-  [0x55c9] = "\xe1\x7a", [0x55cb] = "\x92\xc9", [0x55ce] = "\xe1\x7c",
-  [0x55d2] = "\x97\x9f", [0x55d3] = "\xe1\x7b", [0x55d9] = "\x91\x89",
-  [0x55e0] = "\xe1\x82", [0x55e2] = "\xe1\x84", [0x55e3] = "\xe1\x85",
-  [0x55e4] = "\x92\x73", [0x55ea] = "\xe1\x83", [0x55ec] = "\xe1\x80",
-  [0x55ee] = "\xe1\x7d", [0x55ef] = "\xe1\x7e", [0x55f1] = "\xe1\x81",
-  [0x55f9] = "\xe1\x88", [0x55fb] = "\xe1\x86", [0x55fd] = "\xe1\x87",
-  [0x560f] = "\xe1\x89", [0x5610] = "\xe1\x8b", [0x5611] = "\xe1\x8c",
-  [0x5612] = "\xe1\x8d", [0x5614] = "\xe1\x8e", [0x5617] = "\xe1\x8a",
-  [0x5620] = "\xe1\x90", [0x5624] = "\xe1\x8f", [0x562b] = "\xe1\x91",
-  [0x5632] = "\x97\xc3", [0x5636] = "\xe1\x94", [0x5637] = "\xe1\x92",
-  [0x5638] = "\xe1\x93", [0x563c] = "\x8a\xe0", [0x5642] = "\x96\xfc",
-  [0x5646] = "\x95\xc8", [0x5648] = "\xe1\x96", [0x564c] = "\xe1\x95",
-  [0x5651] = "\xe1\x97", [0x5652] = "\xe1\x98", [0x5657] = "\xe1\x9c",
-  [0x5658] = "\xe1\x99", [0x5659] = "\xe1\x9a", [0x565a] = "\xe1\x9b",
-  [0x565c] = "\xe1\x9d", [0x5660] = "\xe1\x9e", [0x5662] = "\xe1\x9f",
-  [0x5666] = "\xe1\xa0", [0x5668] = "\xe1\xa1", [0x566a] = "\x94\xad",
-  [0x566b] = "\x93\x6f", [0x566c] = "\xe1\xa2", [0x566d] = "\x94\x92",
-  [0x566e] = "\x95\x53", [0x5670] = "\xe1\xa3", [0x5673] = "\xe1\xa4",
-  [0x5674] = "\x93\x49", [0x5676] = "\x8a\x46", [0x5677] = "\x8d\x63",
-  [0x5678] = "\xe1\xa5", [0x567b] = "\xe1\xa6", [0x567e] = "\xe1\xa7",
-  [0x5680] = "\x8e\x48", [0x5683] = "\xe1\xa9", [0x5686] = "\xe1\xa8",
-  [0x5689] = "\xe1\xaa", [0x568a] = "\xe1\xab", [0x569e] = "\x94\xe7",
-  [0x56a0] = "\xe1\xac", [0x56a4] = "\xe1\xad", [0x56a7] = "\xea\x89",
-  [0x56a8] = "\xe1\xae", [0x56a9] = "\xe1\xaf", [0x56aa] = "\xe1\xb0",
-  [0x56af] = "\x8e\x4d", [0x56b2] = "\xe1\xb1", [0x56b3] = "\x94\x75",
-  [0x56b6] = "\x96\x7e", [0x56b8] = "\x89\x6d", [0x56ba] = "\x89\x76",
-  [0x56bd] = "\xe1\xb2", [0x56c2] = "\xe1\xb4", [0x56c6] = "\xe1\xb3",
-  [0x56c7] = "\x93\x90", [0x56cb] = "\x90\xb7", [0x56cc] = "\x9f\x58",
-  [0x56ce] = "\xe1\xb5", [0x56cf] = "\x96\xbf", [0x56d1] = "\xe1\xb6",
-  [0x56d3] = "\x8a\xc4", [0x56d4] = "\x94\xd5", [0x56d5] = "\xe1\xb7",
-  [0x56d7] = "\xe1\xb8", [0x56da] = "\xe1\xb9", [0x56de] = "\x96\xda",
-  [0x56e2] = "\x96\xd3", [0x56e4] = "\x92\xbc", [0x56e8] = "\x91\x8a",
-  [0x56eb] = "\xe1\xbb", [0x56ee] = "\x8f\x82", [0x56f1] = "\x8f\xc8",
-  [0x56f4] = "\xe1\xbe", [0x56f7] = "\xe1\xbd", [0x56f8] = "\xe1\xbc",
-  [0x56f9] = "\x94\xfb", [0x56fb] = "\x8a\xc5", [0x56fc] = "\x8c\xa7",
-  [0x570b] = "\xe1\xc4", [0x570e] = "\xe1\xc1", [0x570f] = "\x90\x5e",
-  [0x5710] = "\x96\xb0", [0x5714] = "\xe1\xc0", [0x5715] = "\xe1\xc2",
-  [0x5716] = "\xe1\xc3", [0x5719] = "\xe1\xbf", [0x5727] = "\xe1\xc5",
-  [0x5728] = "\xe1\xc6", [0x572a] = "\x92\xad", [0x572c] = "\x8a\xe1",
-  [0x5730] = "\x92\x85", [0x5737] = "\xe1\xc7", [0x574a] = "\xe1\xc8",
-  [0x574b] = "\xe1\xcb", [0x5751] = "\x90\x87", [0x5753] = "\x93\xc2",
-  [0x5755] = "\xe1\xcc", [0x5756] = "\x96\x72", [0x5758] = "\xe1\xc9",
-  [0x575b] = "\xe1\xca", [0x5769] = "\xe1\xcf", [0x576e] = "\xe1\xce",
-  [0x576f] = "\xe1\xcd", [0x577b] = "\xe1\xd1", [0x577e] = "\xe1\xd0",
-  [0x5781] = "\xe1\xd2", [0x578e] = "\xe1\xd4", [0x5790] = "\xe1\xd3",
-  [0x5795] = "\x95\xcb", [0x579c] = "\x8f\x75", [0x579d] = "\x97\xc4",
-  [0x57a0] = "\xe1\xd5", [0x57a3] = "\x93\xb5", [0x57a6] = "\xe1\xd6",
-  [0x57a9] = "\xe1\xd7", [0x57ab] = "\xe1\xdb", [0x57ac] = "\xe1\xd9",
-  [0x57ad] = "\xe1\xda", [0x57af] = "\xe1\xd8", [0x57b7] = "\xe1\xdc",
-  [0x57bd] = "\xe1\xdd", [0x57c7] = "\xe1\xde", [0x57ca] = "\xe1\xdf",
-  [0x57cb] = "\x96\xb5", [0x57cc] = "\xe1\xe0", [0x57d2] = "\x96\xee",
-  [0x57d3] = "\xe1\xe1", [0x57d5] = "\x92\x6d", [0x57d7] = "\x94\x8a",
-  [0x57d9] = "\x8b\xe9", [0x57dd] = "\x92\x5a", [0x57de] = "\xe1\xe2",
-  [0x57df] = "\x8b\xb8", [0x57e3] = "\x90\xce", [0x57ec] = "\xe1\xe3",
-  [0x57f2] = "\x8d\xbb", [0x57fc] = "\xe1\xe4", [0x5802] = "\xe1\xe5",
-  [0x5804] = "\x8c\xa4", [0x5805] = "\x8d\xd3", [0x5810] = "\xe1\xe7",
-  [0x5815] = "\x93\x75", [0x5816] = "\x8d\xd4", [0x5817] = "\x8b\x6d",
-  [0x5822] = "\x96\x43", [0x5824] = "\x94\x6a", [0x582a] = "\x93\x76",
-  [0x582f] = "\x8d\x7b", [0x5835] = "\xe1\xe9", [0x584d] = "\x8f\xc9",
-  [0x585b] = "\x97\xb0", [0x585c] = "\x8d\x64", [0x585f] = "\x8c\xa5",
-  [0x5862] = "\x94\xa1", [0x5864] = "\xe1\xeb", [0x586c] = "\xe1\xed",
-  [0x5871] = "\x8c\xe9", [0x5876] = "\xe1\xec", [0x5877] = "\x92\xf4",
-  [0x587c] = "\xe1\xef", [0x587d] = "\x8a\x56", [0x587e] = "\xe1\xea",
-  [0x5881] = "\x94\xe8", [0x5883] = "\x89\x4f", [0x5885] = "\x8d\xea",
-  [0x5887] = "\x98\x71", [0x588a] = "\xe1\xee", [0x5893] = "\xe1\xf0",
-  [0x5897] = "\x95\xc9", [0x5899] = "\x90\xd7", [0x589a] = "\xe1\xf2",
-  [0x589f] = "\xe1\xf3", [0x58a5] = "\xe1\xf1", [0x58aa] = "\x8a\x6d",
-  [0x58ac] = "\xe1\xf9", [0x58ae] = "\xe1\xf8", [0x58b1] = "\x8e\xa5",
-  [0x58b5] = "\xe1\xfa", [0x58b6] = "\xe1\xf5", [0x58ba] = "\xe1\xfb",
-  [0x58bb] = "\xe1\xf6", [0x58c0] = "\x94\xd6", [0x58c1] = "\xe1\xf4",
-  [0x58c4] = "\xe1\xf7", [0x58ca] = "\xe2\x41", [0x58d7] = "\xe2\x40",
-  [0x58d8] = "\x96\x81", [0x58dc] = "\xe1\xfc", [0x58df] = "\x88\xe9",
-  [0x58e4] = "\xe2\x43", [0x58ed] = "\xe2\x42", [0x58f1] = "\x8f\xca",
-  [0x58f7] = "\xe2\x44", [0x58fe] = "\x91\x62", [0x5901] = "\xe2\x46",
-  [0x5902] = "\xe2\x45", [0x5909] = "\xe2\x47", [0x5916] = "\xe1\xe6",
-  [0x591a] = "\xe1\xe8", [0x591b] = "\xe2\x49", [0x591c] = "\xe2\x48",
-  [0x592a] = "\x8e\xa6", [0x592c] = "\x97\xe7", [0x592e] = "\x8e\xd0",
-  [0x5930] = "\xe2\x4a", [0x5931] = "\x8c\x56", [0x5937] = "\x8b\x5f",
-  [0x5938] = "\x8b\x46", [0x5939] = "\x8e\x83", [0x5940] = "\x97\x53",
-  [0x5943] = "\xe2\x50", [0x5945] = "\xe2\x4f", [0x5946] = "\x91\x63",
-  [0x5947] = "\xe2\x4c", [0x594a] = "\xe2\x4e", [0x594d] = "\x8f\x6a",
-  [0x594e] = "\x90\x5f", [0x594f] = "\xe2\x4d", [0x5950] = "\xe2\x4b",
-  [0x5952] = "\x94\x49", [0x5955] = "\x8f\xcb", [0x5958] = "\x95\x5b",
-  [0x595d] = "\x8d\xd5", [0x5967] = "\x93\x98", [0x596a] = "\xe2\x51",
-  [0x596f] = "\xe2\x52", [0x5970] = "\xe2\x68", [0x5971] = "\x8b\xd6",
-  [0x5974] = "\x98\x5c", [0x5975] = "\x91\x54", [0x597a] = "\xe2\x53",
-  [0x597d] = "\x89\xd0", [0x597e] = "\x92\xf5", [0x597f] = "\x95\x9f",
-  [0x598d] = "\xe2\x54", [0x5996] = "\x8b\x9a", [0x5997] = "\xe2\x55",
-  [0x599a] = "\xe2\x57", [0x599e] = "\xe2\x58", [0x59a0] = "\x94\x48",
-  [0x59a3] = "\xe2\x59", [0x59a9] = "\xe2\x5a", [0x59aa] = "\xe2\x5b",
-  [0x59ad] = "\x8b\xd7", [0x59ae] = "\x89\xd1", [0x59af] = "\x93\xc3",
-  [0x59b0] = "\x8f\x47", [0x59b1] = "\x8e\x84", [0x59b9] = "\xe2\x5c",
-  [0x59bb] = "\x8f\x48", [0x59c1] = "\x89\xc8", [0x59c2] = "\x95\x62",
-  [0x59c5] = "\xe2\x5d", [0x59c8] = "\x94\xe9", [0x59cf] = "\x91\x64",
-  [0x59d1] = "\xe2\x60", [0x59d3] = "\xe2\x61", [0x59d4] = "\x94\x89",
-  [0x59d6] = "\x90\x60", [0x59d7] = "\xe2\x5e", [0x59d9] = "\x92\x81",
-  [0x59dc] = "\xe2\x5f", [0x59e0] = "\x8f\xcc", [0x59eb] = "\x88\xda",
-  [0x59f0] = "\x8b\x48", [0x59f8] = "\xe2\x62", [0x59fb] = "\x92\xf6",
-  [0x59fd] = "\xe2\x63", [0x59fe] = "\x90\xc5", [0x5a04] = "\x96\xab",
-  [0x5a07] = "\x95\x42", [0x5a08] = "\xe2\x64", [0x5a09] = "\xe2\x65",
-  [0x5a0a] = "\x92\x74", [0x5a0c] = "\x97\xc5", [0x5a0f] = "\xe2\x67",
-  [0x5a10] = "\xe2\x66", [0x5a1e] = "\x8e\xed", [0x5a21] = "\xe2\x69",
-  [0x5a22] = "\x88\xee", [0x5a27] = "\xe2\x6c", [0x5a2b] = "\xe2\x6a",
-  [0x5a2c] = "\x89\xd2", [0x5a2d] = "\x8c\x6d", [0x5a2e] = "\xe2\x6b",
-  [0x5a2f] = "\x8d\x65", [0x5a30] = "\x8d\x92", [0x5a32] = "\x95\xe4",
-  [0x5a33] = "\xe2\x6d", [0x5a36] = "\x96\x73", [0x5a39] = "\xe2\x6f",
-  [0x5a3d] = "\x90\xcf", [0x5a3e] = "\x89\x6e", [0x5a3f] = "\x89\xb8",
-  [0x5a40] = "\x88\xaa", [0x5a47] = "\xe2\x6e", [0x5a51] = "\xe2\x70",
-  [0x5a52] = "\xe2\x71", [0x5a53] = "\x8f\xf5", [0x5a59] = "\xe2\x72",
-  [0x5a5b] = "\x8a\x6e", [0x5a60] = "\xe2\x74", [0x5a64] = "\x8c\x8a",
-  [0x5a66] = "\x8b\x86", [0x5a69] = "\xe2\x75", [0x5a6a] = "\x8b\xf3",
-  [0x5a6d] = "\xe2\x76", [0x5a6f] = "\x90\xfa", [0x5a71] = "\x93\xcb",
-  [0x5a73] = "\x90\xde", [0x5a74] = "\x8d\xf3", [0x5a78] = "\xe2\x77",
-  [0x5a82] = "\x92\x82", [0x5a83] = "\x91\x8b", [0x5a85] = "\xe2\x79",
-  [0x5a86] = "\xe2\x7b", [0x5a87] = "\xe2\x78", [0x5a88] = "\xe2\x7a",
-  [0x5a8f] = "\x8c\x41", [0x5a99] = "\xe2\x7c", [0x5a9a] = "\x8c\x45",
-  [0x5a9e] = "\x8b\x87", [0x5a9f] = "\x97\x71", [0x5aa0] = "\xe2\x7e",
-  [0x5aa6] = "\xe2\x80", [0x5aaa] = "\x89\x4d", [0x5aaf] = "\xe2\x83",
-  [0x5ab3] = "\x8a\x96", [0x5ab4] = "\xe2\x82", [0x5ab5] = "\xe2\x81",
-  [0x5ab7] = "\xe2\x85", [0x5ab8] = "\xe2\x7d", [0x5aba] = "\xe2\x86",
-  [0x5abb] = "\x97\xa7", [0x5abd] = "\xe2\x87", [0x5abf] = "\xe2\x88",
-  [0x5ac2] = "\x9a\xf2", [0x5ac3] = "\xe2\x8a", [0x5ac5] = "\xe2\x89",
-  [0x5ac9] = "\xe2\x8b", [0x5aca] = "\xe2\x8c", [0x5acc] = "\x97\xb3",
-  [0x5acd] = "\xe2\x8d", [0x5acf] = "\xe8\xed", [0x5ad0] = "\x8f\xcd",
-  [0x5ad1] = "\xe2\x8e", [0x5ad2] = "\xe2\x8f", [0x5ad3] = "\x8f\x76",
-  [0x5ad5] = "\x93\xb6", [0x5ad6] = "\xe2\x90", [0x5ada] = "\x92\x47",
-  [0x5add] = "\xe2\x91", [0x5adf] = "\x92\x5b", [0x5ae0] = "\xe2\x92",
-  [0x5ae6] = "\x8b\xa3", [0x5ae8] = "\x99\x5e", [0x5ae9] = "\x92\x7c",
-  [0x5aea] = "\x8e\xb1", [0x5aef] = "\x8a\xc6", [0x5af2] = "\xe2\x93",
-  [0x5af4] = "\xe2\xa0", [0x5af6] = "\xe2\x96", [0x5af8] = "\x8b\x88",
-  [0x5afa] = "\xe2\x95", [0x5afb] = "\xe2\xa2", [0x5aff] = "\xe2\x94",
-  [0x5b01] = "\x8f\xce", [0x5b08] = "\xe2\x98", [0x5b09] = "\xe2\x99",
-  [0x5b0b] = "\x93\x4a", [0x5b0e] = "\xe2\x9a", [0x5b10] = "\x8a\x7d",
-  [0x5b15] = "\x90\x79", [0x5b16] = "\x95\x84", [0x5b18] = "\xe2\x9c",
-  [0x5b1c] = "\x91\xe6", [0x5b23] = "\xe2\x97", [0x5b25] = "\xe2\x9b",
-  [0x5b26] = "\xe2\x9d", [0x5b29] = "\x8d\xf9", [0x5b35] = "\xe2\xa4",
-  [0x5b36] = "\x95\x4d", [0x5b38] = "\x94\xa4", [0x5b39] = "\x93\x99",
-  [0x5b3b] = "\x8b\xd8", [0x5b3c] = "\xe2\xa3", [0x5b3d] = "\xe2\xa1",
-  [0x5b3f] = "\x94\xb3", [0x5b40] = "\xe2\x9e", [0x5b41] = "\x92\x7d",
-  [0x5b42] = "\x93\x9b", [0x5b44] = "\x93\x9a", [0x5b46] = "\x8d\xf4",
-  [0x5b4d] = "\xe2\xb6", [0x5b55] = "\xe2\xa6", [0x5b57] = "\xe2\xa8",
-  [0x5b5c] = "\xe2\xab", [0x5b5e] = "\xe2\xac", [0x5b60] = "\xe2\xa9",
-  [0x5b61] = "\xe2\xaa", [0x5b64] = "\xe2\xa7", [0x5b65] = "\xe2\xa5",
-  [0x5b6a] = "\xe2\x9f", [0x5b76] = "\x95\xcd", [0x5b77] = "\x89\xd3",
-  [0x5b7b] = "\xe2\xb3", [0x5b7d] = "\xe2\xb0", [0x5b7f] = "\xe2\xb5",
-  [0x5b82] = "\xe2\xb4", [0x5b84] = "\x94\x93", [0x5b85] = "\x96\xa5",
-  [0x5b87] = "\x8e\x5a", [0x5b88] = "\xe2\xae", [0x5b89] = "\xe2\xb7",
-  [0x5b8a] = "\xe2\xb2", [0x5b8c] = "\xe2\xb1", [0x5b8d] = "\xe2\xad",
-  [0x5b8f] = "\xe2\xaf", [0x5b91] = "\x8a\xc7", [0x5b9a] = "\x92\x5c",
-  [0x5b9d] = "\x90\xfb", [0x5ba1] = "\x94\xa0", [0x5ba4] = "\xe2\xbc",
-  [0x5ba8] = "\x94\xa2", [0x5bb0] = "\x90\xdf", [0x5bb1] = "\xe2\xb9",
-  [0x5bb4] = "\x94\xcd", [0x5bb6] = "\xe2\xbd", [0x5bb7] = "\x95\xd1",
-  [0x5bb9] = "\x92\x7a", [0x5bbb] = "\xe2\xb8", [0x5bbc] = "\xe2\xba",
-  [0x5bbf] = "\xe2\xbb", [0x5bcd] = "\xe2\xbe", [0x5bd0] = "\x8e\xc2",
-  [0x5bd4] = "\x93\xc4", [0x5bd5] = "\xe2\xc3", [0x5bd6] = "\xe2\xc2",
-  [0x5bd9] = "\xe2\xbf", [0x5bdd] = "\x98\x55", [0x5be3] = "\xe2\xc8",
-  [0x5be6] = "\xe2\xcc", [0x5be7] = "\xe2\xc9", [0x5bf0] = "\xe2\xc5",
-  [0x5bf7] = "\xe2\xc6", [0x5bfd] = "\xe2\xcb", [0x5c01] = "\xe2\xc0",
-  [0x5c02] = "\x99\xd3", [0x5c03] = "\xe2\xc7", [0x5c04] = "\xe2\xc1",
-  [0x5c07] = "\xe2\xca", [0x5c0f] = "\xe2\xd0", [0x5c11] = "\x8a\xc8",
-  [0x5c13] = "\xe2\xcd", [0x5c17] = "\xe2\xce", [0x5c1a] = "\xe2\xcf",
-  [0x5c1b] = "\xe2\xd2", [0x5c27] = "\xe2\xd1", [0x5c28] = "\x94\xf4",
-  [0x5c2d] = "\xe2\xd3", [0x5c2e] = "\x97\xfa", [0x5c2f] = "\x95\xeb",
-  [0x5c30] = "\xe2\xd8", [0x5c33] = "\xe2\xd5", [0x5c3c] = "\xe2\xd4",
-  [0x5c3d] = "\x90\xd0", [0x5c3f] = "\xe2\xd7", [0x5c40] = "\xe2\xd9",
-  [0x5c44] = "\xe2\xd6", [0x5c46] = "\xe2\xdd", [0x5c48] = "\xe2\xda",
-  [0x5c4f] = "\xe2\xdb", [0x5c50] = "\xe2\xc4", [0x5c54] = "\xe2\xdc",
-  [0x5c55] = "\xe2\xde", [0x5c5c] = "\xe2\xdf", [0x5c63] = "\x95\xc4",
-  [0x5c65] = "\xe2\xe0", [0x5c6e] = "\x96\xe0", [0x5c71] = "\x8b\xcc",
-  [0x5c72] = "\x8c\x48", [0x5c73] = "\xe2\xe1", [0x5c79] = "\x95\xb2",
-  [0x5c7b] = "\x90\x88", [0x5c7d] = "\x96\xae", [0x5c80] = "\xe2\xe2",
-  [0x5c82] = "\x97\xb1", [0x5c85] = "\x94\x94", [0x5c87] = "\x91\x65",
-  [0x5c88] = "\x94\x53", [0x5c8b] = "\x8f\x6c", [0x5c8f] = "\x88\xbe",
-  [0x5c91] = "\xe2\xe7", [0x5c92] = "\xe2\xe5", [0x5c94] = "\xe2\xe3",
-  [0x5c95] = "\x8a\x9f", [0x5c97] = "\x8f\xcf", [0x5c98] = "\xe2\xe8",
-  [0x5c9b] = "\xe2\xe6", [0x5c9d] = "\xe2\xe4", [0x5c9e] = "\xe2\xec",
-  [0x5ca1] = "\xe2\xeb", [0x5ca2] = "\xe2\xea", [0x5ca3] = "\xe2\xe9",
-  [0x5ca9] = "\xe2\xed", [0x5cad] = "\xe2\xee", [0x5cae] = "\x90\xb8",
-  [0x5cb0] = "\xe2\xef", [0x5cb2] = "\xe2\xf1", [0x5cb5] = "\xe2\xf0",
-  [0x5cba] = "\x8c\xd0", [0x5cbe] = "\x91\x57", [0x5cc2] = "\xe2\xf3",
-  [0x5cc6] = "\x93\x9c", [0x5cc8] = "\xe2\xf2", [0x5ccc] = "\xe2\xf4",
-  [0x5cce] = "\x95\xb3", [0x5ccf] = "\x91\x8c", [0x5cd0] = "\x8d\x66",
-  [0x5cd2] = "\xe2\xf5", [0x5cd7] = "\x97\xc6", [0x5cdf] = "\xe2\xf7",
-  [0x5ce2] = "\xe2\xf8", [0x5ce4] = "\xe2\xf9", [0x5ce6] = "\xe2\xfa",
-  [0x5ce8] = "\x8e\x85", [0x5cea] = "\xe2\xfb", [0x5ceb] = "\x8c\x6e",
-  [0x5cee] = "\x8b\x8a", [0x5cf0] = "\x8b\x49", [0x5cf2] = "\xe3\x40",
-  [0x5cf4] = "\x96\xf1", [0x5cf5] = "\x8d\x67", [0x5cf6] = "\xe2\xfc",
-  [0x5cfa] = "\xe3\x43", [0x5cfb] = "\x96\xe4", [0x5cfd] = "\x94\x5b",
-  [0x5d00] = "\x95\x52", [0x5d04] = "\x8f\x83", [0x5d05] = "\xe3\x42",
-  [0x5d07] = "\x8e\xd1", [0x5d08] = "\x8d\x68", [0x5d09] = "\x8e\x86",
-  [0x5d0a] = "\x8b\x89", [0x5d0b] = "\x95\xb4", [0x5d0c] = "\xe3\x41",
-  [0x5d10] = "\x91\x66", [0x5d11] = "\x96\x61", [0x5d12] = "\x8d\xf5",
-  [0x5d1b] = "\x8e\x87", [0x5d1c] = "\x92\xdb", [0x5d1e] = "\xe3\x46",
-  [0x5d1f] = "\x97\xdd", [0x5d20] = "\x8d\xd7", [0x5d22] = "\xe3\x47",
-  [0x5d23] = "\x90\x61", [0x5d25] = "\xe3\x49", [0x5d29] = "\x8f\xd0",
-  [0x5d2a] = "\x8d\xae", [0x5d2f] = "\xe3\x48", [0x5d32] = "\x8f\x49",
-  [0x5d33] = "\x8c\xbc", [0x5d34] = "\x91\x67", [0x5d35] = "\xe3\x44",
-  [0x5d36] = "\xe3\x4a", [0x5d3b] = "\xe3\x45", [0x5d3c] = "\x8c\x6f",
-  [0x5d3e] = "\xe3\x4d", [0x5d3f] = "\xe3\x51", [0x5d40] = "\x8c\x8b",
-  [0x5d46] = "\xe3\x4c", [0x5d4b] = "\xe3\x55", [0x5d4e] = "\x8d\x69",
-  [0x5d51] = "\x97\x8d", [0x5d52] = "\x88\xba", [0x5d53] = "\xe3\x52",
-  [0x5d56] = "\x8b\x8b", [0x5d58] = "\xe3\x4f", [0x5d5e] = "\xe3\x50",
-  [0x5d61] = "\x93\x9d", [0x5d62] = "\xe3\x4e", [0x5d63] = "\xe3\x4b",
-  [0x5d65] = "\x8a\x47", [0x5d66] = "\x90\xe2", [0x5d69] = "\x8c\xa6",
-  [0x5d6d] = "\xe3\x57", [0x5d79] = "\xe3\x54", [0x5d7f] = "\xe3\x56",
-  [0x5d83] = "\xe3\x53", [0x5d89] = "\x8c\x70", [0x5d8a] = "\x91\xb1",
-  [0x5d8b] = "\xe3\x58", [0x5d8c] = "\x91\x8e", [0x5d8f] = "\xe3\x65",
-  [0x5d92] = "\xe3\x61", [0x5d93] = "\xe3\x5b", [0x5d9b] = "\xe3\x5f",
-  [0x5d9c] = "\x8e\xf8", [0x5d9d] = "\x88\xdb", [0x5d9e] = "\xe3\x5a",
-  [0x5d9f] = "\xe3\x62", [0x5da0] = "\xe3\x66", [0x5da1] = "\x8d\x6a",
-  [0x5da2] = "\x96\xd4", [0x5da4] = "\x92\xd4", [0x5da5] = "\xe3\x5c",
-  [0x5da8] = "\xe3\x64", [0x5daa] = "\xe3\x59", [0x5dab] = "\x92\x5d",
-  [0x5dad] = "\xe3\x5e", [0x5dae] = "\x88\xbb", [0x5daf] = "\x96\xc8",
-  [0x5db7] = "\xe3\x5d", [0x5dba] = "\x8b\xd9", [0x5dbb] = "\x94\xea",
-  [0x5dbf] = "\x91\x8d", [0x5dc1] = "\x97\xce", [0x5dc2] = "\x8f\x8f",
-  [0x5dc5] = "\xe3\x8e", [0x5dc8] = "\xe3\x67", [0x5dca] = "\x90\xfc",
-  [0x5dcc] = "\xe3\x63", [0x5dcd] = "\xe3\x68", [0x5dce] = "\xe3\x6a",
-  [0x5dd0] = "\x92\xf7", [0x5dd1] = "\xe3\x6d", [0x5dd4] = "\xe3\x69",
-  [0x5dd8] = "\x95\xd2", [0x5dd9] = "\x8a\xc9", [0x5ddc] = "\x96\xc9",
-  [0x5ddf] = "\x88\xdc", [0x5de2] = "\xe3\x6c", [0x5de4] = "\x97\xfb",
-  [0x5deb] = "\xe3\x6b", [0x5df1] = "\x89\x8f", [0x5df4] = "\x93\xea",
-  [0x5df5] = "\xe3\x6e", [0x5df9] = "\xe3\x75", [0x5dfa] = "\xe3\x6f",
-  [0x5dfb] = "\xe3\x76", [0x5e02] = "\xe3\x72", [0x5e0b] = "\x94\x9b",
-  [0x5e0e] = "\x8e\xc8", [0x5e0f] = "\xe3\x74", [0x5e11] = "\xe3\x71",
-  [0x5e12] = "\xe3\x77", [0x5e13] = "\xe3\x70", [0x5e16] = "\x8f\x63",
-  [0x5e1b] = "\x96\x44", [0x5e1e] = "\x8f\x6b", [0x5e21] = "\xe3\x73",
-  [0x5e22] = "\xe3\x80", [0x5e25] = "\xe3\x7b", [0x5e27] = "\xe3\x7e",
-  [0x5e29] = "\xe3\x7c", [0x5e2a] = "\xe3\x81", [0x5e2b] = "\xe3\x7a",
-  [0x5e2d] = "\xe3\x60", [0x5e2e] = "\x90\xd1", [0x5e31] = "\x94\xc9",
-  [0x5e33] = "\xe3\x7d", [0x5e36] = "\xe3\x78", [0x5e3a] = "\x91\x40",
-  [0x5e3b] = "\x8c\x71", [0x5e3d] = "\x8f\x4a", [0x5e44] = "\x90\x44",
-  [0x5e45] = "\x91\x55", [0x5e46] = "\xe3\x84", [0x5e49] = "\xe3\x86",
-  [0x5e4a] = "\xe3\x87", [0x5e4d] = "\xe3\x83", [0x5e4e] = "\xe3\x85",
-  [0x5e56] = "\xe3\x79", [0x5e57] = "\xe3\x82", [0x5e59] = "\xe3\x8a",
-  [0x5e5a] = "\xe3\x89", [0x5e5d] = "\x96\x9a", [0x5e60] = "\x8c\x4a",
-  [0x5e69] = "\xe3\x88", [0x5e6b] = "\xe3\x8c", [0x5e6c] = "\xe3\x8b",
-  [0x5e6d] = "\xe3\x8f", [0x5e6f] = "\xe3\x91", [0x5e72] = "\x8e\x5b",
-  [0x5e73] = "\xe3\x8d", [0x5e78] = "\xe3\x92", [0x5e79] = "\xe3\x93",
-  [0x5e7c] = "\xe3\x94", [0x5e7e] = "\xe3\x9a", [0x5e7f] = "\x93\x5a",
-  [0x5e80] = "\xe3\x96", [0x5e82] = "\xe3\x95", [0x5e83] = "\xe3\x97",
-  [0x5e84] = "\xe3\x98", [0x5e86] = "\xe3\x99", [0x5e8b] = "\xe3\x9b",
-  [0x5e8c] = "\xe3\x9c", [0x5f26] = "\x8a\xca", [0x5f28] = "\xe3\x9d",
-  [0x5f2a] = "\xe3\x9e", [0x5f35] = "\xe3\x9f", [0x5f3c] = "\xe3\xa0",
-  [0x5f3d] = "\xe3\xa1", [0x5f3e] = "\xe3\xa2", [0x5f40] = "\xe3\xa3",
-  [0x5f41] = "\xe3\xa4", [0x5f44] = "\xe3\xa6", [0x5f45] = "\xe3\xa5",
-  [0x5f48] = "\xe3\xa7", [0x5f4f] = "\xe3\xa8", [0x5f50] = "\xe3\xa9",
-  [0x5f57] = "\xe3\xac", [0x5f58] = "\xe3\xaa", [0x5f59] = "\xe3\xab",
-  [0x5f5a] = "\x8d\xdf", [0x5f5b] = "\x8c\x72", [0x5f5e] = "\x92\x75",
-  [0x5f60] = "\x94\xb1", [0x5f62] = "\x8f\x90", [0x5f65] = "\x94\x6c",
-  [0x5f67] = "\x94\xeb", [0x5f68] = "\xe3\xad", [0x5f69] = "\x9c\xeb",
-  [0x5f72] = "\xe3\xae", [0x5f73] = "\xe3\xb0", [0x5f75] = "\x97\x85",
-  [0x5f76] = "\xe3\xaf", [0x5f77] = "\xe3\xb2", [0x5f78] = "\xe3\xb1",
-  [0x5f7a] = "\x97\x72", [0x5f7c] = "\xe3\xb3", [0x5f7e] = "\x94\xfc",
-  [0x5f84] = "\xe3\xb4", [0x5f8a] = "\xe3\xb7", [0x5f8d] = "\xe3\xb6",
-  [0x5f8e] = "\xe3\xb5", [0x5f93] = "\xe3\xb8", [0x5f94] = "\x8c\x51",
-  [0x5f98] = "\x91\x41", [0x5f99] = "\x8b\x60", [0x5f9e] = "\xe3\xbc",
-  [0x5f9f] = "\xe3\xb9", [0x5fa2] = "\xe3\xba", [0x5fa6] = "\xe3\xbd",
-  [0x5fa8] = "\xe3\xbe", [0x5fa9] = "\xe3\xbb", [0x5fad] = "\x89\x48",
-  [0x5fb1] = "\x89\xa5", [0x5fb5] = "\xe3\xc0", [0x5fb6] = "\xe3\xc1",
-  [0x5fba] = "\xe3\xc2", [0x5fbc] = "\x97\x82", [0x5fc2] = "\x8f\x4b",
-  [0x5fc4] = "\xe3\xc4", [0x5fc5] = "\xe3\xc3", [0x5fd0] = "\x90\x89",
-  [0x5fd1] = "\xe3\xc5", [0x5fd6] = "\xe3\xc6", [0x5fd9] = "\xe3\xc7",
-  [0x5fdb] = "\x8a\xe3", [0x5fe0] = "\x8a\xcb", [0x5fe3] = "\xe3\xc8",
-  [0x5fe9] = "\xe3\xc9", [0x5feb] = "\x96\x7c", [0x5fec] = "\x97\x83",
-  [0x5ff0] = "\x97\x73", [0x5ff1] = "\x98\x56", [0x5ff3] = "\x8d\x6c",
-  [0x5ff4] = "\xe3\xcc", [0x5ff5] = "\x8e\xd2", [0x5ff6] = "\xe3\xcb",
-  [0x5ffb] = "\xe3\xcd", [0x5ffc] = "\x8e\xa7", [0x6000] = "\x91\xcf",
-  [0x6002] = "\xe3\xce", [0x6005] = "\x8d\x6b", [0x6007] = "\x96\xd5",
-  [0x6008] = "\xe3\xcf", [0x6009] = "\xe3\xd0", [0x600c] = "\xe3\xd1",
-  [0x6011] = "\xe3\xd2", [0x6018] = "\xe3\xd3", [0x6023] = "\x8e\xa8",
-  [0x6026] = "\x96\xeb", [0x602b] = "\xe3\xd5", [0x602d] = "\x92\x5e",
-  [0x602f] = "\xe3\xd4", [0x6036] = "\xe3\xd7", [0x603a] = "\xe3\xd6",
-  [0x6042] = "\xe3\xd8", [0x6046] = "\x90\xb9", [0x6048] = "\xe3\xd9",
-  [0x604a] = "\xe3\xda", [0x604e] = "\x95\xb7", [0x604f] = "\xe3\xdb",
-  [0x6051] = "\x91\x8f", [0x6052] = "\xe3\xdc", [0x6058] = "\xe3\xdd",
-  [0x605f] = "\x97\xfc", [0x6060] = "\xe3\xe0", [0x6062] = "\xe3\xdf",
-  [0x6063] = "\xe3\xde", [0x6064] = "\x92\xae", [0x6066] = "\xe3\xe1",
-  [0x6067] = "\x90\x45", [0x6069] = "\xe3\xe2", [0x606d] = "\xe3\xe3",
-  [0x606e] = "\x98\x57", [0x606f] = "\xe3\xe4", [0x6074] = "\xe3\xe5",
-  [0x6075] = "\xe3\xe7", [0x6076] = "\xe3\xe6", [0x6077] = "\x94\xa3",
-  [0x6079] = "\x93\xf7", [0x607b] = "\x98\x5d", [0x607c] = "\x94\xa7",
-  [0x6083] = "\xe3\xe9", [0x6086] = "\x8f\xd1", [0x6088] = "\x95\x49",
-  [0x608a] = "\xe3\xea", [0x608b] = "\xe3\xe8", [0x608d] = "\x8a\xcc",
-  [0x6091] = "\x8c\xd2", [0x6092] = "\x8e\x88", [0x6095] = "\x94\xec",
-  [0x6099] = "\x8c\xa8", [0x609a] = "\x96\x62", [0x609c] = "\xe3\xed",
-  [0x609d] = "\xe3\xeb", [0x609f] = "\x8d\x6d", [0x60a1] = "\x8d\x6e",
-  [0x60a2] = "\x88\xe7", [0x60a4] = "\x8d\xe6", [0x60aa] = "\x94\x78",
-  [0x60b3] = "\x88\xdd", [0x60b4] = "\xe3\xf2", [0x60b6] = "\x92\x5f",
-  [0x60bc] = "\x94\x77", [0x60be] = "\x91\xd9", [0x60c6] = "\xe3\xf4",
-  [0x60c9] = "\xe3\xf0", [0x60ca] = "\xe3\xf3", [0x60cb] = "\xe3\xee",
-  [0x60cd] = "\xe3\xf1", [0x60ce] = "\x96\x45", [0x60d1] = "\x8c\xd3",
-  [0x60d4] = "\x88\xfb", [0x60d5] = "\xe3\xef", [0x60df] = "\xe3\xf6",
-  [0x60e1] = "\xe3\xf7", [0x60e4] = "\x93\xb7", [0x60e8] = "\x8b\xb9",
-  [0x60ec] = "\xe4\x45", [0x60ed] = "\x94\x5c", [0x60f2] = "\x8e\x89",
-  [0x60f5] = "\x8b\xba", [0x60f6] = "\x90\xc6", [0x60f7] = "\x98\x65",
-  [0x60f8] = "\x96\xac", [0x60f9] = "\xe3\xf5", [0x60fa] = "\x90\xd2",
-  [0x610a] = "\x8b\x72", [0x610b] = "\xe3\xf8", [0x6113] = "\xe3\xfa",
-  [0x6119] = "\xe3\xf9", [0x611f] = "\xe3\xfb", [0x6121] = "\x92\x45",
-  [0x6123] = "\x94\x5d", [0x6129] = "\x92\xaf", [0x612e] = "\xe4\x42",
-  [0x6136] = "\xe4\x41", [0x613b] = "\xe3\xfc", [0x613e] = "\x90\x74",
-  [0x6140] = "\x95\x85", [0x6141] = "\xe4\x44", [0x6143] = "\xe4\x43",
-  [0x6144] = "\x8d\x6f", [0x6145] = "\x98\x72", [0x614f] = "\xe4\x54",
-  [0x6155] = "\xe4\x48", [0x6156] = "\xe4\x49", [0x615b] = "\x8e\xee",
-  [0x615e] = "\xe4\x47", [0x6160] = "\x8d\x98", [0x6161] = "\xe4\x46",
-  [0x6164] = "\xe4\x4a", [0x6168] = "\x92\xb0", [0x6169] = "\x95\xa0",
-  [0x616a] = "\x91\x42", [0x616f] = "\x91\xda", [0x6170] = "\xe4\x4e",
-  [0x6172] = "\xe4\x4f", [0x6173] = "\xe4\x4b", [0x6178] = "\xe4\x4c",
-  [0x617a] = "\xe4\x4d", [0x617f] = "\x8d\x70", [0x6183] = "\xe4\x55",
-  [0x6185] = "\xe4\x51", [0x618a] = "\x95\x86", [0x618c] = "\x96\x8c",
-  [0x618d] = "\x95\x47", [0x6190] = "\xe4\x50", [0x6193] = "\xe4\x53",
-  [0x6194] = "\xe4\x52", [0x6198] = "\x96\x63", [0x6199] = "\xe4\x56",
-  [0x61a0] = "\xe4\x57", [0x61a3] = "\x91\x56", [0x61a5] = "\xe4\x58",
-  [0x61a8] = "\xe4\x5a", [0x61aa] = "\xe4\x5e", [0x61ad] = "\xe4\x5b",
-  [0x61ae] = "\xe4\x59", [0x61af] = "\x94\x5e", [0x61b0] = "\xe4\x5c",
-  [0x61b2] = "\xe4\x5d", [0x61b6] = "\x89\xb0", [0x61b8] = "\xe4\x64",
-  [0x61b9] = "\xe4\x5f", [0x61bd] = "\xe4\x60", [0x61c1] = "\xe4\x61",
-  [0x61c3] = "\x91\x9f", [0x61c8] = "\xe4\x63", [0x61c9] = "\xe4\x62",
-  [0x61ca] = "\xe4\x65", [0x61cf] = "\xe4\x66", [0x61d0] = "\xe4\x67",
-  [0x61d3] = "\x90\x62", [0x61d5] = "\x89\xe7", [0x61d7] = "\xe4\x68",
-  [0x61d8] = "\x97\xd5", [0x61da] = "\x8e\xa9", [0x61dd] = "\x8f\x4c",
-  [0x61e3] = "\x8e\x8a", [0x61e4] = "\x92\x76", [0x61ea] = "\xe4\x69",
-  [0x61eb] = "\xe4\x6a", [0x61ec] = "\x89\x50", [0x61ee] = "\xe4\x6b",
-  [0x61f1] = "\xe4\x6c", [0x61f2] = "\xe4\x6d", [0x61f5] = "\xe4\x6e",
-  [0x61f7] = "\xe4\x6f", [0x61f8] = "\x8b\xbb", [0x61f9] = "\x9d\xa8",
-  [0x61fa] = "\xe4\x70", [0x61fc] = "\x90\xe3", [0x61fd] = "\xe4\x71",
-  [0x61fe] = "\x8e\xc9", [0x6200] = "\xe4\x72", [0x6202] = "\x98\xae",
-  [0x6206] = "\xe4\x73", [0x6207] = "\x95\xdc", [0x6208] = "\x8a\xda",
-  [0x620b] = "\x91\x43", [0x620c] = "\x8f\x77", [0x620e] = "\x95\x91",
-  [0x620f] = "\x8f\x4d", [0x6219] = "\xe4\x74", [0x621a] = "\x8d\x71",
-  [0x621b] = "\xe4\x75", [0x621c] = "\x94\xca", [0x621e] = "\xe4\x84",
-  [0x6223] = "\xe4\x77", [0x6225] = "\x91\xc7", [0x6226] = "\x94\x95",
-  [0x6227] = "\x8c\xbd", [0x6228] = "\xe4\x76", [0x6229] = "\x91\x44",
-  [0x6230] = "\xe4\x78", [0x6237] = "\x92\xf8", [0x6248] = "\xe4\x7a",
-  [0x6249] = "\xe4\x79", [0x624a] = "\xe4\x7c", [0x624d] = "\xe4\x7b",
-  [0x624f] = "\xe4\x7d", [0x6252] = "\xe4\x80", [0x6254] = "\xe4\x7e",
-  [0x6256] = "\x8a\xcd", [0x6258] = "\xe4\x81", [0x625a] = "\xe4\x82",
-  [0x625b] = "\xe4\x83", [0x625e] = "\x8d\xaf", [0x625f] = "\x97\xc7",
-  [0x6261] = "\xe4\x85", [0x6262] = "\x90\x46", [0x6266] = "\x89\x90",
-  [0x6267] = "\xe4\x86", [0x6268] = "\xe4\x87", [0x626e] = "\xe4\x88",
-  [0x627b] = "\x88\xf0", [0x627d] = "\xe4\x89", [0x6282] = "\xe4\x8a",
-  [0x6289] = "\x95\x87", [0x628d] = "\x8e\xc5", [0x628f] = "\xe4\x8c",
-  [0x6295] = "\x8a\x48", [0x6296] = "\x88\xb0", [0x629b] = "\xe4\x8b",
-  [0x629c] = "\xe4\x8e", [0x629d] = "\x94\x6d", [0x629f] = "\x90\x63",
-  [0x62a1] = "\x89\xd4", [0x62a3] = "\x96\x46", [0x62a8] = "\x8c\x7c",
-  [0x62a9] = "\x8b\xda", [0x62ab] = "\xe4\x8d", [0x62ad] = "\x89\xe8",
-  [0x62b5] = "\x8a\xa1", [0x62c1] = "\x89\x91", [0x62c2] = "\xe4\x92",
-  [0x62c3] = "\x97\xe8", [0x62c4] = "\x91\xdb", [0x62c7] = "\x95\x63",
-  [0x62c9] = "\xe4\x9e", [0x62cb] = "\x89\xd5", [0x62cc] = "\xe4\x9c",
-  [0x62ce] = "\xe4\x9a", [0x62cf] = "\xe4\x91", [0x62d1] = "\xe4\x8f",
-  [0x62d3] = "\xe4\x90", [0x62d5] = "\x8e\xe1", [0x62d6] = "\x8b\xea",
-  [0x62d7] = "\x92\x97", [0x62db] = "\x93\xcf", [0x62e1] = "\x89\x70",
-  [0x62e3] = "\xe4\x94", [0x62e4] = "\xe4\x93", [0x62e9] = "\xe4\x99",
-  [0x62ea] = "\xe4\x95", [0x62eb] = "\xe4\x98", [0x62f2] = "\x96\xce",
-  [0x62f3] = "\xe4\x97", [0x62f4] = "\x89\xd6", [0x62f5] = "\x8a\x9d",
-  [0x62f6] = "\xe4\x9b", [0x62f9] = "\xe4\x9d", [0x62fe] = "\x8c\x73",
-  [0x6306] = "\xe4\xa1", [0x6307] = "\xe4\xaa", [0x6308] = "\xe4\xab",
-  [0x630c] = "\x88\xa9", [0x6313] = "\xe4\xb2", [0x6318] = "\x88\xef",
-  [0x631b] = "\xe4\xa9", [0x631f] = "\xe4\xa8", [0x6321] = "\xe4\xa3",
-  [0x6322] = "\xe4\xa2", [0x6324] = "\xe4\xa0", [0x6325] = "\xe4\x9f",
-  [0x6326] = "\x92\x83", [0x6328] = "\x91\xf9", [0x6329] = "\xe4\xa5",
-  [0x6330] = "\xe4\xa4", [0x6335] = "\xe4\xa7", [0x6339] = "\x91\x90",
-  [0x633a] = "\x8c\x74", [0x633f] = "\x89\x60", [0x6340] = "\xe4\xa6",
-  [0x6342] = "\x8d\x72", [0x6348] = "\x91\x91", [0x6363] = "\xe4\xb8",
-  [0x6365] = "\xe4\xb9", [0x6367] = "\x89\xd7", [0x636b] = "\x89\xac",
-  [0x636c] = "\xe4\xb6", [0x6375] = "\xe4\xac", [0x6377] = "\xe4\xb4",
-  [0x6379] = "\xe4\xbb", [0x637a] = "\xe4\xb5", [0x637e] = "\xe4\xb3",
-  [0x6383] = "\xe4\x96", [0x6386] = "\xe4\xb1", [0x638a] = "\xe4\xad",
-  [0x638e] = "\x8a\xce", [0x638f] = "\xe4\xaf", [0x6390] = "\xe4\xba",
-  [0x6392] = "\xe4\xb0", [0x6398] = "\xe4\xbc", [0x639a] = "\xe4\xae",
-  [0x639b] = "\x94\x9c", [0x63a1] = "\x97\x89", [0x63a5] = "\xe4\xb7",
-  [0x63ad] = "\xe4\xcd", [0x63b1] = "\xe4\xc5", [0x63b5] = "\x90\x9b",
-  [0x63ba] = "\x8b\x65", [0x63bc] = "\x8b\xdb", [0x63be] = "\xe4\xc0",
-  [0x63c3] = "\x89\xd9", [0x63c6] = "\x8f\xd2", [0x63c8] = "\xe4\xc3",
-  [0x63cc] = "\x8d\xd8", [0x63cf] = "\x93\x70", [0x63d0] = "\xe4\xc8",
-  [0x63d9] = "\x95\xec", [0x63db] = "\xe4\xbf", [0x63df] = "\x89\xd8",
-  [0x63e0] = "\x8c\xd4", [0x63e1] = "\x95\x48", [0x63e2] = "\xe4\xc9",
-  [0x63e4] = "\xe4\xbd", [0x63e7] = "\xe4\xc6", [0x63eb] = "\xe4\xd0",
-  [0x63ed] = "\xe4\xc1", [0x63f3] = "\xe4\xc2", [0x63f4] = "\x93\xb8",
-  [0x63f7] = "\xe4\xc7", [0x63fb] = "\xe4\xc4", [0x63fc] = "\x96\x47",
-  [0x63fd] = "\xe4\xca", [0x63fe] = "\x88\xde", [0x6403] = "\xe4\xbe",
-  [0x6410] = "\xe4\xcc", [0x6412] = "\xe4\xcb", [0x6419] = "\x94\x8b",
-  [0x641a] = "\xe4\xd2", [0x641c] = "\xe4\xdd", [0x6421] = "\x8a\x9e",
-  [0x6425] = "\xe4\xe0", [0x6428] = "\xe4\xce", [0x642c] = "\xe4\xd3",
-  [0x642d] = "\x97\x8e", [0x6436] = "\xe4\xdc", [0x6439] = "\x97\x74",
-  [0x643e] = "\x97\xa8", [0x6447] = "\x92\x98", [0x644b] = "\x8a\x8b",
-  [0x6451] = "\x95\x92", [0x6452] = "\xe4\xe2", [0x6453] = "\x93\x9f",
-  [0x6456] = "\x88\xaf", [0x6459] = "\xe4\xdb", [0x645b] = "\xe4\xd7",
-  [0x645c] = "\x91\x92", [0x645d] = "\xe4\xd1", [0x645e] = "\xe4\xd9",
-  [0x645f] = "\xe4\xde", [0x6461] = "\x94\x4b", [0x6465] = "\x88\xa8",
-  [0x6467] = "\xe4\xd6", [0x6469] = "\xe4\xdf", [0x646a] = "\x95\x98",
-  [0x6472] = "\xe4\xda", [0x6474] = "\xe4\xd5", [0x647b] = "\x8f\xd3",
-  [0x6480] = "\x8f\x4e", [0x6484] = "\x8e\xaa", [0x6489] = "\x96\xd6",
-  [0x648c] = "\x95\x66", [0x648f] = "\xe4\xe5", [0x6491] = "\xe4\xee",
-  [0x649d] = "\xe4\xd8", [0x64a2] = "\x8a\x97", [0x64a8] = "\x8f\xf6",
-  [0x64a9] = "\xe4\xe3", [0x64ab] = "\xe4\xe8", [0x64ac] = "\x91\x93",
-  [0x64af] = "\xe4\xe4", [0x64b1] = "\xe4\xeb", [0x64b4] = "\x92\x7e",
-  [0x64b6] = "\xe4\xec", [0x64b9] = "\x97\x75", [0x64ba] = "\xe4\xe1",
-  [0x64bb] = "\x8a\x57", [0x64bd] = "\xe4\xe7", [0x64c0] = "\xe4\xea",
-  [0x64c1] = "\x96\xaa", [0x64c6] = "\xe4\xed", [0x64c9] = "\xe4\xe6",
-  [0x64ca] = "\xe4\xe9", [0x64dc] = "\x96\x48", [0x64de] = "\x98\x40",
-  [0x64e4] = "\xe4\xf1", [0x64ec] = "\xe4\xf8", [0x64ef] = "\xe4\xf0",
-  [0x64f0] = "\x8e\xc1", [0x64f6] = "\xe4\xcf", [0x6501] = "\x95\xcc",
-  [0x6503] = "\x96\xa0", [0x6504] = "\xe4\xf7", [0x6505] = "\xe4\xf6",
-  [0x6507] = "\xe4\xf2", [0x6508] = "\xe4\xf3", [0x650a] = "\x89\x55",
-  [0x650f] = "\xe4\xf5", [0x6511] = "\xe4\xef", [0x6516] = "\x92\xd3",
-  [0x651c] = "\xe4\xf4", [0x651d] = "\x88\xfc", [0x6525] = "\x91\xa0",
-  [0x652d] = "\x95\xc1", [0x6530] = "\xe4\xf9", [0x6531] = "\xe5\x40",
-  [0x6533] = "\x94\xd7", [0x6538] = "\xe4\xfc", [0x6539] = "\x8f\xd4",
-  [0x653a] = "\x8e\xc7", [0x653b] = "\xe5\x42", [0x653e] = "\x8b\xbc",
-  [0x6545] = "\xe5\x43", [0x6547] = "\x95\x99", [0x6548] = "\xe4\xfb",
-  [0x654a] = "\xe4\xd4", [0x6553] = "\xe4\xfa", [0x6558] = "\x98\x6e",
-  [0x6559] = "\x93\xa0", [0x655a] = "\x95\x93", [0x655d] = "\xe5\x4a",
-  [0x6567] = "\xe5\x50", [0x656e] = "\xe5\x51", [0x6570] = "\xe5\x44",
-  [0x6574] = "\x94\x96", [0x6577] = "\xe5\x4e", [0x6578] = "\xe5\x46",
-  [0x657a] = "\xe5\x48", [0x6580] = "\xe5\x52", [0x6581] = "\xe5\x47",
-  [0x6584] = "\xe5\x4b", [0x6587] = "\x89\x92", [0x6589] = "\x93\xe3",
-  [0x658b] = "\xe5\x4c", [0x658c] = "\xe5\x4f", [0x6594] = "\xe5\x45",
-  [0x6596] = "\x91\x45", [0x6598] = "\xe5\x49", [0x6599] = "\x8e\x46",
-  [0x659a] = "\x90\x64", [0x659b] = "\x8c\x4f", [0x659c] = "\x96\xf2",
-  [0x659e] = "\x96\xf7", [0x659f] = "\x8f\x92", [0x65a9] = "\xe5\x56",
-  [0x65aa] = "\xe5\x54", [0x65b1] = "\x98\x6d", [0x65b9] = "\xe5\x53",
-  [0x65bd] = "\x97\x95", [0x65bf] = "\xe5\x55", [0x65c0] = "\xe5\x57",
-  [0x65c5] = "\xe5\x58", [0x65cc] = "\xe5\x5b", [0x65cd] = "\xe5\x59",
-  [0x65d4] = "\x93\xa1", [0x65d5] = "\xe5\x5a", [0x65d9] = "\x94\xcb",
-  [0x65da] = "\xe5\x4d", [0x65e7] = "\x8f\x93", [0x65e9] = "\xe5\x5c",
-  [0x65ea] = "\xe5\x61", [0x65eb] = "\x91\x94", [0x65ee] = "\xe5\x60",
-  [0x65f2] = "\xe5\x41", [0x65f6] = "\xe5\x62", [0x65f7] = "\x91\x68",
-  [0x65fa] = "\xe5\x5d", [0x65fb] = "\xe5\x5f", [0x6603] = "\xe5\x5e",
-  [0x6606] = "\x9f\x50", [0x6607] = "\x9f\x41", [0x660a] = "\xe5\x64",
-  [0x6612] = "\xe5\x63", [0x661d] = "\x97\x96", [0x661f] = "\xe1\xba",
-  [0x6620] = "\xe5\x65", [0x662f] = "\xe5\x66", [0x663d] = "\xe5\x67",
-  [0x663e] = "\x8c\xd5", [0x6640] = "\x8b\x73", [0x6644] = "\xe5\x69",
-  [0x6645] = "\x99\x7c", [0x664a] = "\x8b\x95", [0x664c] = "\x97\xb8",
-  [0x664e] = "\x8b\xf1", [0x664f] = "\xe5\x6a", [0x6657] = "\xe5\x6b",
-  [0x665b] = "\x92\x8e", [0x6661] = "\xe5\x6c", [0x6669] = "\x93\xf8",
-  [0x666b] = "\x88\xb8", [0x667a] = "\x89\xe1", [0x667b] = "\xe5\x71",
-  [0x667c] = "\xe5\x72", [0x6683] = "\xe5\x6d", [0x6685] = "\x8e\x5c",
-  [0x6693] = "\xe5\x6e", [0x6694] = "\x94\x61", [0x6699] = "\xe5\x6f",
-  [0x669a] = "\xe5\x70", [0x669b] = "\xe5\x7a", [0x669f] = "\xe5\x74",
-  [0x66a0] = "\xe5\x77", [0x66a6] = "\xe5\x73", [0x66b4] = "\xe5\x75",
-  [0x66b6] = "\xe5\x76", [0x66b7] = "\x8e\xd6", [0x66b9] = "\xe5\x78",
-  [0x66bb] = "\x92\x60", [0x66bd] = "\x8c\x75", [0x66be] = "\x8a\x61",
-  [0x66c4] = "\xe5\x7b", [0x66c9] = "\x8a\x5e", [0x66cb] = "\xe5\x81",
-  [0x66ce] = "\xe5\x7c", [0x66cf] = "\xe5\x80", [0x66d4] = "\x94\xb8",
-  [0x66d9] = "\xe5\x7d", [0x66dc] = "\xe5\x7e", [0x66dd] = "\x95\x67",
-  [0x66de] = "\x94\xd8", [0x66df] = "\xe5\x82", [0x66e8] = "\x91\xfb",
-  [0x66e9] = "\xe5\x8c", [0x66eb] = "\xe5\x88", [0x66ee] = "\x89\xe9",
-  [0x66f0] = "\xe5\x86", [0x66f2] = "\x96\x49", [0x66f3] = "\xe5\x87",
-  [0x66f6] = "\xe5\x84", [0x66f8] = "\xe5\x85", [0x66f9] = "\xe5\x8a",
-  [0x66fa] = "\xe5\x8d", [0x66fd] = "\xe5\x8b", [0x6701] = "\xe5\x89",
-  [0x6702] = "\xe5\x83", [0x6708] = "\x92\x77", [0x670a] = "\xe5\x94",
-  [0x670c] = "\x96\xa8", [0x6715] = "\xe5\x92", [0x6719] = "\xe5\x93",
-  [0x6724] = "\xe5\x8e", [0x6727] = "\xe5\x90", [0x672b] = "\xe5\x91",
-  [0x672f] = "\xe5\x8f", [0x6739] = "\x90\xe4", [0x673b] = "\x98\x58",
-  [0x673c] = "\xe5\x98", [0x673e] = "\xe5\x99", [0x6743] = "\xe5\x9f",
-  [0x6745] = "\x90\x49", [0x6747] = "\xe5\x9b", [0x6749] = "\xe5\x9e",
-  [0x674f] = "\xe5\x96", [0x6750] = "\xe5\x95", [0x6753] = "\xe5\xa0",
-  [0x6756] = "\x89\xda", [0x6758] = "\xe5\x9c", [0x675a] = "\xe5\xa1",
-  [0x675e] = "\xe5\x9d", [0x6764] = "\xe5\x9a", [0x6766] = "\x92\xb1",
-  [0x6768] = "\xe5\x97", [0x676f] = "\x94\x88", [0x6772] = "\xe5\xa5",
-  [0x677d] = "\x97\x5a", [0x678f] = "\xe5\xa4", [0x6792] = "\xe5\xa3",
-  [0x679b] = "\xe5\xac", [0x679f] = "\xe5\xa6", [0x67a3] = "\xe5\xae",
-  [0x67aa] = "\x97\x86", [0x67ab] = "\xe5\xb1", [0x67ad] = "\xe5\xa8",
-  [0x67b0] = "\xe5\xa9", [0x67b4] = "\xe5\xad", [0x67b6] = "\xe5\xb0",
-  [0x67b7] = "\xe5\xaf", [0x67bb] = "\xe5\xa7", [0x67c0] = "\xe5\xaa",
-  [0x67c2] = "\xe5\xbb", [0x67d0] = "\xe5\xb4", [0x67df] = "\xe5\xb2",
-  [0x67e2] = "\xe5\xb3", [0x67e6] = "\xe5\xb8", [0x67e7] = "\xe5\xb9",
-  [0x67e9] = "\x8a\x49", [0x67eb] = "\x8b\x61", [0x67ee] = "\xe5\xb7",
-  [0x67f5] = "\xe5\xa2", [0x67fd] = "\xe5\xb6", [0x67fe] = "\xe5\xba",
-  [0x67ff] = "\xe5\xb5", [0x6801] = "\xe5\xbc", [0x6805] = "\xe5\xbe",
-  [0x6806] = "\xe5\xbd", [0x6811] = "\xe5\xc0", [0x6812] = "\xe5\xbf",
-  [0x6813] = "\xe5\x79", [0x6817] = "\xe5\xc4", [0x6821] = "\xe5\xc1",
-  [0x6826] = "\xe5\xc2", [0x6829] = "\xe5\xc3", [0x682b] = "\xe5\xc5",
-  [0x6830] = "\x8c\x8c", [0x6832] = "\xe5\xc7", [0x6834] = "\xe5\xc6",
-  [0x6836] = "\x8f\x4f", [0x683c] = "\x8d\x73", [0x683d] = "\x9f\xa5",
-  [0x6842] = "\xe5\xc8", [0x6843] = "\x8f\x70", [0x6847] = "\x8a\x58",
-  [0x6849] = "\xe5\xc9", [0x684b] = "\x89\x71", [0x684d] = "\x8f\xd5",
-  [0x684e] = "\xe5\xca", [0x6851] = "\x8d\x74", [0x6852] = "\xe5\xcb",
-  [0x6853] = "\x88\xdf", [0x6858] = "\x95\x5c", [0x685b] = "\xe5\xcc",
-  [0x6860] = "\x90\x8a", [0x6862] = "\xe5\xd3", [0x6865] = "\xe5\xd0",
-  [0x6867] = "\x92\x8f", [0x686d] = "\xe5\xd1", [0x686e] = "\xe5\xce",
-  [0x686f] = "\x8b\xdc", [0x6871] = "\xe5\xcd", [0x6872] = "\xe5\xd4",
-  [0x6878] = "\x8c\x55", [0x687b] = "\x91\xdc", [0x687d] = "\xe5\xda",
-  [0x6882] = "\xe5\xd6", [0x6886] = "\x91\xb3", [0x6887] = "\xe5\xd5",
-  [0x6889] = "\xe5\xd8", [0x688e] = "\xe5\xcf", [0x6892] = "\xe5\xd9",
-  [0x6894] = "\xe5\xdb", [0x689b] = "\x94\xed", [0x689e] = "\xe5\xd7",
-  [0x68a0] = "\xe5\xdc", [0x68a1] = "\xe5\xde", [0x68a4] = "\x8c\xd1",
-  [0x68a5] = "\xe5\xd2", [0x68a7] = "\x88\xbf", [0x68af] = "\xe5\xdd",
-  [0x68b1] = "\x8d\xd9", [0x68b2] = "\x97\xf4", [0x68b3] = "\xe5\xdf",
-  [0x68b4] = "\xe5\xe0", [0x68b5] = "\x91\x95", [0x68bf] = "\x97\xa0",
-  [0x68c4] = "\xe5\xe1", [0x68c5] = "\x97\x54", [0x68c8] = "\xe5\xe2",
-  [0x68c9] = "\xe5\xe3", [0x68cc] = "\x95\xe2", [0x68cd] = "\xe5\xe4",
-  [0x68cf] = "\x8d\xbe", [0x68d1] = "\x97\xa1", [0x68d8] = "\xe5\xe9",
-  [0x68e2] = "\xe5\xea", [0x68e3] = "\x8f\xd6", [0x68e4] = "\xe5\xe8",
-  [0x68e8] = "\x97\x87", [0x68e9] = "\xe5\xe5", [0x68ec] = "\xe5\xe7",
-  [0x68ed] = "\x90\xbb", [0x68ee] = "\x90\x9e", [0x68f2] = "\xe5\xe6",
-  [0x68f4] = "\xe5\xeb", [0x68f7] = "\x95\xa1", [0x68fa] = "\xe5\xed",
-  [0x68fc] = "\xe5\xec", [0x6900] = "\x8a\x8c", [0x6902] = "\x96\x4a",
-  [0x6903] = "\xe5\xee", [0x690d] = "\xe5\xfa", [0x690e] = "\xe5\xf0",
-  [0x6915] = "\xe5\xf1", [0x691a] = "\xe5\xf2", [0x691b] = "\xe5\xf3",
-  [0x6926] = "\xe5\xf7", [0x6928] = "\xe5\xf8", [0x692b] = "\xe5\xf6",
-  [0x6931] = "\xe5\xf4", [0x6933] = "\xe5\xef", [0x6934] = "\xe5\xf5",
-  [0x693c] = "\xe5\xf9", [0x693d] = "\xe8\xb5", [0x6946] = "\x89\xa6",
-  [0x694e] = "\xe5\xfc", [0x694f] = "\x8b\xdd", [0x6950] = "\xe5\xfb",
-  [0x6954] = "\xe6\x41", [0x6956] = "\xe6\x40", [0x695a] = "\xe6\x43",
-  [0x695d] = "\xe6\x42", [0x695f] = "\xe6\x44", [0x6962] = "\x8f\x50",
-  [0x6964] = "\xe6\x45", [0x6967] = "\xe6\x46", [0x696e] = "\xe6\x47",
-  [0x696f] = "\x90\xbc", [0x6971] = "\x97\x76", [0x6973] = "\xe6\x48",
-  [0x6976] = "\x95\xa2", [0x6977] = "\x94\x65", [0x6978] = "\xe6\x49",
-  [0x697a] = "\xe6\x4a", [0x697b] = "\x8c\xa9", [0x697f] = "\x8b\x4b",
-  [0x6983] = "\xe6\x4b", [0x6986] = "\x8e\x8b", [0x6987] = "\x94\x60",
-  [0x6988] = "\xe6\x4c", [0x698a] = "\x8a\x6f", [0x6991] = "\xe6\x4d",
-  [0x6996] = "\xe6\x4f", [0x6997] = "\x97\x97", [0x6999] = "\xe6\x4e",
-  [0x699a] = "\x90\x65", [0x699c] = "\xe6\x50", [0x699f] = "\xe6\x51",
-  [0x69a2] = "\xe6\x52", [0x69a3] = "\x8a\xcf", [0x69aa] = "\xe6\x53",
-  [0x69ad] = "\xe6\x54", [0x69af] = "\xe6\x55", [0x69b0] = "\xe6\x56",
-  [0x69c2] = "\x8a\x70", [0x69ca] = "\xe6\x57", [0x69cc] = "\xe6\x58",
-  [0x69cd] = "\xe6\x59", [0x69d3] = "\x89\xf0", [0x69d6] = "\x90\x47",
-  [0x69d7] = "\xe6\x5a", [0x69e4] = "\xe6\x5b", [0x69e8] = "\xe6\x5c",
-  [0x69f0] = "\x8c\xbe", [0x69f2] = "\x92\xf9", [0x69f3] = "\xe6\x5d",
-  [0x69f8] = "\x8c\x76", [0x69fa] = "\x90\x75", [0x69fc] = "\xe6\x60",
-  [0x69fe] = "\x93\xa2", [0x6a00] = "\xe6\x5f", [0x6a03] = "\x8c\x50",
-  [0x6a06] = "\xe6\x5e", [0x6a07] = "\x91\xf5", [0x6a08] = "\x8b\x4c",
-  [0x6a0b] = "\xe6\x61", [0x6a0d] = "\xe6\x62", [0x6a0f] = "\x8f\xd7",
-  [0x6a13] = "\x8c\x8d", [0x6a15] = "\xe6\x63", [0x6a1a] = "\x96\x4b",
-  [0x6a1d] = "\x90\xdd", [0x6a21] = "\x8b\x96", [0x6a23] = "\x96\xf3",
-  [0x6a24] = "\x91\x69", [0x6a26] = "\xe6\x64", [0x6a2a] = "\x90\x66",
-  [0x6a2b] = "\x92\x90", [0x6a2c] = "\x8f\xd8", [0x6a31] = "\xe6\x65",
-  [0x6a36] = "\xe6\x68", [0x6a38] = "\xe6\x69", [0x6a40] = "\x8d\xbc",
-  [0x6a41] = "\x91\xc0", [0x6a42] = "\xe6\x67", [0x6a44] = "\x8f\xd9",
-  [0x6a45] = "\x95\x5d", [0x6a4b] = "\xe6\x66", [0x6a4e] = "\x8e\x8c",
-  [0x6a50] = "\x89\x72", [0x6a52] = "\xe6\x6d", [0x6a53] = "\x8c\x77",
-  [0x6a56] = "\x8e\x8e", [0x6a59] = "\x8e\x8d", [0x6a5b] = "\x98\x6c",
-  [0x6a5c] = "\xe6\x6c", [0x6a5d] = "\xe6\x6b", [0x6a5e] = "\x91\x46",
-  [0x6a60] = "\x8b\x6c", [0x6a61] = "\x98\x62", [0x6a62] = "\x8a\x59",
-  [0x6a63] = "\x8f\xda", [0x6a6c] = "\xe6\x6a", [0x6a72] = "\xe6\x6f",
-  [0x6a74] = "\xe6\x70", [0x6a75] = "\xe6\x6e", [0x6a77] = "\x8c\xd6",
-  [0x6a79] = "\x97\x5f", [0x6a7c] = "\x8e\x8f", [0x6a7d] = "\x94\x46",
-  [0x6a81] = "\xe6\x73", [0x6a83] = "\x90\xbe", [0x6a85] = "\x92\x61",
-  [0x6a88] = "\x97\x55", [0x6a8a] = "\xe6\x76", [0x6a8e] = "\x8c\xea",
-  [0x6a90] = "\x90\xbd", [0x6a91] = "\xe6\x72", [0x6a93] = "\xe6\x77",
-  [0x6a94] = "\x8c\xeb", [0x6a95] = "\xe6\x74", [0x6a96] = "\xe6\x75",
-  [0x6a98] = "\xe6\x71", [0x6a9c] = "\x90\xe0", [0x6a9d] = "\x93\xc7",
-  [0x6aa0] = "\x92\x4e", [0x6aa2] = "\x89\xdb", [0x6aa9] = "\x94\xee",
-  [0x6aac] = "\x8b\x62", [0x6aaf] = "\x92\xb2", [0x6ab2] = "\xe6\x7a",
-  [0x6ab4] = "\xe6\x78", [0x6ab7] = "\x92\x6b", [0x6abb] = "\x90\xbf",
-  [0x6abc] = "\x8a\xd0", [0x6abd] = "\xe6\x79", [0x6abf] = "\x90\x7a",
-  [0x6ac2] = "\x97\xc8", [0x6ac6] = "\x98\x5f", [0x6aca] = "\xe6\x7b",
-  [0x6acb] = "\xe6\x87", [0x6acc] = "\x92\xb3", [0x6ace] = "\xe6\x86",
-  [0x6ad0] = "\xe6\x83", [0x6ad1] = "\xe6\x8b", [0x6ad2] = "\xe6\x84",
-  [0x6ad4] = "\xe6\x80", [0x6ad6] = "\x92\xfa", [0x6ad7] = "\xe6\x7e",
-  [0x6adb] = "\xe6\x7c", [0x6add] = "\x97\x40", [0x6ade] = "\x8e\x90",
-  [0x6ae1] = "\xe6\x81", [0x6ae3] = "\xe6\x7d", [0x6ae7] = "\xe6\x85",
-  [0x6ae8] = "\x8f\x94", [0x6aea] = "\x8c\xbf", [0x6aee] = "\x91\xf8",
-  [0x6af0] = "\x96\x64", [0x6af1] = "\x89\x79", [0x6af2] = "\x88\xe0",
-  [0x6af4] = "\x93\xa3", [0x6af7] = "\xe6\x89", [0x6afc] = "\xe6\x88",
-  [0x6afe] = "\x93\xe4", [0x6b00] = "\xe6\x8d", [0x6b04] = "\xe6\x82",
-  [0x6b06] = "\xe6\x8c", [0x6b07] = "\xe6\x8e", [0x6b09] = "\x8c\xaa",
-  [0x6b0a] = "\xe6\x8a", [0x6b0b] = "\x8d\x75", [0x6b0d] = "\x8e\xd3",
-  [0x6b10] = "\xe6\x8f", [0x6b11] = "\x97\x77", [0x6b16] = "\xe6\x92",
-  [0x6b18] = "\xe6\x95", [0x6b1b] = "\xe6\x93", [0x6b1c] = "\x95\x54",
-  [0x6b23] = "\xe6\x90", [0x6b29] = "\x8b\xde", [0x6b2e] = "\xe6\x94",
-  [0x6b31] = "\xe6\x96", [0x6b39] = "\xe6\x9a", [0x6b3c] = "\xe6\x97",
-  [0x6b3e] = "\xe6\x99", [0x6b3f] = "\xe6\x98", [0x6b46] = "\xe6\x9b",
-  [0x6b48] = "\x8e\xaf", [0x6b4a] = "\xe6\x9d", [0x6b4b] = "\xe6\x9c",
-  [0x6b4c] = "\x95\x88", [0x6b4f] = "\xe6\x9f", [0x6b56] = "\x8c\x78",
-  [0x6b5b] = "\xe6\x9e", [0x6b5c] = "\xe6\xa0", [0x6b5f] = "\xe6\xa1",
-  [0x6b60] = "\x8b\x63", [0x6b61] = "\xe3\xbf", [0x6b62] = "\x8f\xf7",
-  [0x6b64] = "\xe6\xa2", [0x6b67] = "\x8c\xec", [0x6b6d] = "\xe6\xa3",
-  [0x6b70] = "\xe6\xa4", [0x6b73] = "\x8e\x5d", [0x6b7a] = "\x9d\xcc",
-  [0x6b7c] = "\xe6\xa5", [0x6b7e] = "\xe6\xa6", [0x6b80] = "\x8f\x51",
-  [0x6b82] = "\xe6\xa7", [0x6b83] = "\xe6\xa8", [0x6b86] = "\xe6\xa9",
-  [0x6b89] = "\xe6\xaa", [0x6b8a] = "\xe6\xab", [0x6c27] = "\x92\x4a",
-  [0x6c2a] = "\xe6\xac", [0x6c2f] = "\xe6\xae", [0x6c31] = "\xe6\xad",
-  [0x6c36] = "\x93\xa4", [0x6c38] = "\xe6\xaf", [0x6c3a] = "\x96\x4c",
-  [0x6c3c] = "\xe6\xb0", [0x6c3e] = "\xe6\xb1", [0x6c40] = "\xe6\xb2",
-  [0x6c45] = "\xe6\xb3", [0x6c4a] = "\x93\xd8", [0x6c51] = "\x8f\xdb",
-  [0x6c52] = "\xe6\xb4", [0x6c5a] = "\x8d\x8b", [0x6c5b] = "\x98\xac",
-  [0x6c5c] = "\xe6\xb5", [0x6c68] = "\xe6\xb6", [0x6c69] = "\x95\x5e",
-  [0x6c6a] = "\xe6\xb7", [0x6c6c] = "\xe6\xbf", [0x6c72] = "\xe6\xb8",
-  [0x6c75] = "\xe6\xba", [0x6c79] = "\xe6\xb9", [0x6c7a] = "\xe6\xbb",
-  [0x6c7c] = "\x96\x65", [0x6c7d] = "\xe6\xbc", [0x6c7e] = "\xe6\xbd",
-  [0x6c84] = "\xe6\xbe", [0x6c88] = "\xe6\xc0", [0x6c8d] = "\x8a\x4c",
-  [0x6c8e] = "\x92\xe5", [0x6c90] = "\x95\x89", [0x6c91] = "\x8d\xe0",
-  [0x6c92] = "\x8d\x76", [0x6c97] = "\x95\x6e", [0x6c98] = "\x89\xdd",
-  [0x6c99] = "\x94\xcc", [0x6c9a] = "\xe6\xc3", [0x6c9b] = "\x8a\xd1",
-  [0x6c9c] = "\x90\xd3", [0x6c9d] = "\xe6\xc2", [0x6c9e] = "\xe6\xc7",
-  [0x6c9f] = "\x92\x99", [0x6ca0] = "\x96\xe1", [0x6ca2] = "\xe6\xc5",
-  [0x6ca3] = "\xe6\xc6", [0x6ca4] = "\x8b\x4d", [0x6ca6] = "\xe6\xc8",
-  [0x6ca7] = "\x94\x83", [0x6ca8] = "\x91\xdd", [0x6cab] = "\x94\xef",
-  [0x6cac] = "\x93\x5c", [0x6cad] = "\xe6\xc4", [0x6caf] = "\x96\x66",
-  [0x6cb0] = "\x89\xea", [0x6cb1] = "\xe6\xca", [0x6cb2] = "\x98\x47",
-  [0x6cb3] = "\x92\xc0", [0x6cb4] = "\x98\x64", [0x6cb7] = "\x8e\x91",
-  [0x6cb8] = "\xe6\xc9", [0x6cba] = "\x91\xaf", [0x6cbd] = "\xe6\xda",
-  [0x6cbe] = "\x91\x47", [0x6cc1] = "\x93\xf6", [0x6cc3] = "\x95\x6f",
-  [0x6cca] = "\xe6\xcd", [0x6ccb] = "\x8e\x5e", [0x6ccc] = "\x8e\x92",
-  [0x6cce] = "\x8f\xdc", [0x6cd0] = "\x94\x85", [0x6cd2] = "\x8c\xab",
-  [0x6cd3] = "\xe6\xcc", [0x6cd4] = "\xe6\xcb", [0x6cd6] = "\x95\x8a",
-  [0x6cda] = "\x8e\xbf", [0x6cdd] = "\x93\x71", [0x6cea] = "\xe6\xcf",
-  [0x6ceb] = "\xe6\xd0", [0x6cec] = "\x8d\x77", [0x6ced] = "\xe6\xce",
-  [0x6cf4] = "\xe6\xd1", [0x6cf5] = "\xe6\xd2", [0x6cf7] = "\xe6\xd4",
-  [0x6cf8] = "\x91\xa1", [0x6cfa] = "\xe6\xd3", [0x6cfb] = "\x8a\xe4",
-  [0x6cfd] = "\xe6\xd6", [0x6cff] = "\xe6\xd5", [0x6d00] = "\xe6\xd7",
-  [0x6d03] = "\xe6\xd9", [0x6d04] = "\xe6\xdb", [0x6d06] = "\xe6\xdc",
-  [0x6d54] = "\x90\xd4", [0x6d56] = "\x8e\xcd", [0x6d57] = "\xe6\xdd",
-  [0x6d5b] = "\x8a\x71", [0x6d5d] = "\xe6\xde", [0x6d60] = "\x91\x96",
-  [0x6d61] = "\xe6\xdf", [0x6d63] = "\xe6\xe0", [0x6d64] = "\x95\x8b",
-  [0x6d67] = "\x8b\x4e", [0x6d71] = "\xe6\xe1", [0x6d75] = "\x92\xb4",
-  [0x6d7a] = "\x89\x7a", [0x6d89] = "\xe6\xe2", [0x6d93] = "\x8e\xef",
-  [0x6d98] = "\x90\x96", [0x6da3] = "\x91\xab", [0x6daa] = "\xe6\xe5",
-  [0x6dae] = "\xe6\xe4", [0x6db2] = "\xe6\xe3", [0x6dbb] = "\xe6\xeb",
-  [0x6dbc] = "\xe6\xe9", [0x6dbf] = "\xe6\xe6", [0x6dc6] = "\xe6\xe8",
-  [0x6dca] = "\xe6\xe7", [0x6dcb] = "\xe6\xea", [0x6dcd] = "\x8b\x97",
-  [0x6dcf] = "\xe6\xee", [0x6dd1] = "\x90\xd5", [0x6dd3] = "\xe6\xef",
-  [0x6dd8] = "\x8c\xd7", [0x6dda] = "\xe6\xec", [0x6ddb] = "\xe6\xed",
-  [0x6ddf] = "\x98\x48", [0x6de3] = "\x92\xb5", [0x6de5] = "\x91\x48",
-  [0x6dec] = "\xe6\xf0", [0x6def] = "\xe6\xf3", [0x6df8] = "\xe6\xf1",
-  [0x6df9] = "\xe6\xf2", [0x6dfa] = "\x97\x78", [0x6dff] = "\x93\xa5",
-  [0x6e00] = "\xe6\xf6", [0x6e0d] = "\xe6\xf4", [0x6e0e] = "\xe6\xf5",
-  [0x6e0f] = "\xe6\xf7", [0x6e1a] = "\xe7\x48", [0x6e20] = "\xe6\xfa",
-  [0x6e24] = "\xe6\xfb", [0x6e25] = "\xe6\xf9", [0x6e32] = "\xe6\xf8",
-  [0x6e34] = "\x92\xfb", [0x6e37] = "\xe7\x40", [0x6e38] = "\xe7\x44",
-  [0x6e39] = "\xe7\x41", [0x6e3a] = "\xe6\xfc", [0x6e3c] = "\xe7\x42",
-  [0x6e40] = "\xe7\x43", [0x6e45] = "\xe7\x4a", [0x6e49] = "\xe7\x45",
-  [0x6e4f] = "\x90\xd6", [0x6e50] = "\xe7\x47", [0x6e53] = "\xe7\x49",
-  [0x6e54] = "\xe7\x46", [0x6e62] = "\xe7\x4c", [0x6e64] = "\x8f\x52",
-  [0x6e66] = "\xe7\x4b", [0x6e6c] = "\xe7\x4d", [0x6e71] = "\xe7\x4e",
-  [0x6e74] = "\xe7\x51", [0x6e75] = "\xe7\x50", [0x6e77] = "\xe7\x4f",
-  [0x6e7a] = "\xe7\x53", [0x6e7b] = "\xe7\x52", [0x6e7d] = "\x96\xf4",
-  [0x6e81] = "\xe7\x55", [0x6e83] = "\xe7\x54", [0x6e84] = "\xe7\x56",
-  [0x6e89] = "\xe7\x57", [0x6e91] = "\xe7\x59", [0x6e9a] = "\xe7\x58",
-  [0x6e9b] = "\x90\x67", [0x6e9c] = "\xe7\x5a", [0x6e9f] = "\x8b\xeb",
-  [0x6ea0] = "\xe7\x5b", [0x6ea1] = "\xe7\x5d", [0x6eae] = "\xe7\x5e",
-  [0x6eb5] = "\xe7\x5f", [0x6eb6] = "\xe7\x5c", [0x6eb8] = "\xe7\x60",
-  [0x6eba] = "\x8e\xd4", [0x6ebb] = "\xe7\x61", [0x6ebc] = "\x8b\x4f",
-  [0x6ebd] = "\x8c\x52", [0x6ec2] = "\x8c\xac", [0x6ecb] = "\xe7\x62",
-  [0x6ecf] = "\x93\xee", [0x6ed2] = "\x93\x5d", [0x6ed3] = "\xe7\x63",
-  [0x6edb] = "\xe7\x66", [0x6ee8] = "\x8e\xb2", [0x6eeb] = "\xe7\x65",
-  [0x6eec] = "\xe7\x64", [0x6eed] = "\x8c\x79", [0x6eee] = "\xe7\x67",
-  [0x6ef3] = "\x8a\x72", [0x6ef5] = "\xe7\x69", [0x6ef9] = "\x8d\xda",
-  [0x6efa] = "\xe7\x68", [0x6efc] = "\xe7\x71", [0x6f02] = "\xe7\x6b",
-  [0x6f03] = "\xe7\x6d", [0x6f04] = "\x95\xe3", [0x6f05] = "\xe7\x6a",
-  [0x6f09] = "\xe7\x6c", [0x6f0b] = "\xe7\x70", [0x6f0c] = "\xe7\x6e",
-  [0x6f0d] = "\x8b\x50", [0x6f0f] = "\xe7\x6f", [0x6f16] = "\xe7\x72",
-  [0x6f19] = "\x94\x79", [0x6f1a] = "\x97\xd6", [0x6f1f] = "\x8f\x53",
-  [0x6f23] = "\xe7\x73", [0x6f28] = "\x97\x41", [0x6f29] = "\xe7\x75",
-  [0x6f2b] = "\xe7\x74", [0x6f2e] = "\xe7\x78", [0x6f2f] = "\x97\x60",
-  [0x6f32] = "\xe7\x77", [0x6f34] = "\x8a\x8d", [0x6f35] = "\xe7\x76",
-  [0x6f36] = "\xe7\x7b", [0x6f39] = "\xe7\x7a", [0x6f3c] = "\xe7\x79",
-  [0x6f3d] = "\x93\x51", [0x6f3e] = "\xe7\x7c", [0x6f47] = "\xe7\x7d",
-  [0x6f4c] = "\xe7\x7e", [0x6f4f] = "\x8d\x8c", [0x6f51] = "\x8c\x44",
-  [0x6f52] = "\xe7\x80", [0x6f53] = "\xe7\x81", [0x6f54] = "\xe7\x82",
-  [0x6f8b] = "\x90\x68", [0x6f8c] = "\xe7\x83", [0x6f8e] = "\x8e\xab",
-  [0x6f8f] = "\xe7\x84", [0x6f93] = "\xe7\x85", [0x6f97] = "\x99\x9f",
-  [0x6f98] = "\x99\x9e", [0x6f9d] = "\xe7\x86", [0x6f9e] = "\xe3\x90",
-  [0x6f9f] = "\xe7\x87", [0x6fa0] = "\x92\x43", [0x6fa1] = "\x90\x4a",
-  [0x6fa2] = "\x94\x5f", [0x6fa7] = "\xe7\x88", [0x6faa] = "\x95\xd3",
-  [0x6fab] = "\x92\xd2", [0x6fac] = "\x8d\x9e", [0x6faf] = "\x92\x48",
-  [0x6fb2] = "\x89\x49", [0x6fb4] = "\x96\x98", [0x6fb5] = "\x90\x76",
-  [0x6fbe] = "\x8c\x7d", [0x6fc1] = "\x8b\xdf", [0x6fc4] = "\x95\xd4",
-  [0x6fca] = "\xe7\x89", [0x6fd2] = "\xe7\x8b", [0x6fd5] = "\xe7\x8a",
-  [0x6fd6] = "\x89\xde", [0x6fd9] = "\x93\xf4", [0x6fda] = "\xe7\x8c",
-  [0x6fdb] = "\x94\x97", [0x6fdd] = "\x93\x52", [0x6fdf] = "\xe7\x8d",
-  [0x6fe0] = "\x8f\x71", [0x6fe4] = "\xe7\x8f", [0x6fe7] = "\x96\xc0",
-  [0x6fe8] = "\xe7\x9e", [0x6fe9] = "\xe7\x91", [0x6fea] = "\xe7\x92",
-  [0x6fed] = "\x92\xc7", [0x6ff0] = "\x91\xde", [0x6ff1] = "\x91\x97",
-  [0x6ff3] = "\x93\xa6", [0x6ff5] = "\xe7\x90", [0x6ff6] = "\x8b\x74",
-  [0x6ffb] = "\xe7\x99", [0x6ffd] = "\xe7\x96", [0x6ffe] = "\xe7\xa3",
-  [0x6fff] = "\x93\xa7", [0x7000] = "\x92\x80", [0x7001] = "\xe7\x93",
-  [0x7003] = "\x92\xfc", [0x7004] = "\x93\x72", [0x7005] = "\xe7\x94",
-  [0x7006] = "\xe7\x98", [0x7007] = "\x90\x80", [0x7009] = "\x94\x87",
-  [0x700a] = "\x92\xca", [0x700d] = "\x90\xc0", [0x700e] = "\xe7\x97",
-  [0x700f] = "\x91\xac", [0x7010] = "\x91\xa2", [0x7011] = "\xe7\x95",
-  [0x7012] = "\x88\xa7", [0x7013] = "\x98\x41", [0x7017] = "\xe7\x9a",
-  [0x701e] = "\x91\xdf", [0x7021] = "\x8f\x54", [0x7022] = "\x90\x69",
-  [0x7025] = "\xe7\x9c", [0x7026] = "\xe7\x9b", [0x7028] = "\x88\xed",
-  [0x7029] = "\xe7\x9d", [0x702c] = "\x95\x4e", [0x702e] = "\xe7\xa5",
-  [0x7031] = "\x93\xd9", [0x7032] = "\x90\x8b", [0x7035] = "\x92\x78",
-  [0x7037] = "\x8b\xf6", [0x7039] = "\xe7\xa4", [0x703a] = "\x97\x56",
-  [0x703b] = "\x89\x5e", [0x703d] = "\x95\xd5", [0x703e] = "\x89\xdf",
-  [0x703f] = "\xe7\x9f", [0x7040] = "\xe7\xa0", [0x7041] = "\xe7\xa1",
-  [0x7042] = "\xe7\xa2", [0x7043] = "\x93\xb9", [0x7044] = "\x92\x42",
-  [0x7045] = "\x88\xe1", [0x7046] = "\xe7\xa6", [0x7048] = "\xe7\xa7",
-  [0x7049] = "\xea\xa1", [0x704c] = "\x91\xbb", [0x704e] = "\xe7\xa8",
-  [0x7050] = "\x89\x93", [0x7051] = "\x91\x6b", [0x7053] = "\x8c\xad",
-  [0x7055] = "\x97\x79", [0x7058] = "\xe7\xa9", [0x7059] = "\x93\x4b",
-  [0x705d] = "\x91\x98", [0x705e] = "\x8e\xd5", [0x705f] = "\xe7\xaa",
-  [0x7062] = "\xe7\xad", [0x7065] = "\x8f\x85", [0x7066] = "\xe7\xab",
-  [0x7067] = "\x91\x4a", [0x7068] = "\x91\x49", [0x706a] = "\x88\xe2",
-  [0x706c] = "\x97\xc9", [0x706d] = "\xe7\xaf", [0x706f] = "\x94\xf0",
-  [0x7070] = "\xe7\xb1", [0x7071] = "\xe7\xb0", [0x7072] = "\xe7\xae",
-  [0x7073] = "\xe2\x84", [0x7074] = "\x8a\xd2", [0x7077] = "\xe7\x8e",
-  [0x7079] = "\xe7\xb3", [0x707a] = "\xe7\xb2", [0x707f] = "\xe7\xb4",
-  [0x7081] = "\x97\x57", [0x7093] = "\x93\xdf", [0x7096] = "\x96\x4d",
-  [0x7098] = "\xe7\xb5", [0x709a] = "\x8e\xd7", [0x709f] = "\xe7\xb6",
-  [0x70a1] = "\xe7\xb7", [0x70a5] = "\xe7\xb8", [0x70a8] = "\x93\x40",
-  [0x70b1] = "\x88\xe8", [0x70ba] = "\x8d\x78", [0x70be] = "\x98\x59",
-  [0x70cb] = "\xe7\xbc", [0x70d1] = "\x8c\x53", [0x70d2] = "\xe7\xb9",
-  [0x70d4] = "\xe7\xba", [0x70d8] = "\x95\x94", [0x70dd] = "\x8a\x73",
-  [0x70e5] = "\x97\x58", [0x70e7] = "\x8b\xbd", [0x70ed] = "\x93\x73",
-  [0x70f2] = "\xe7\xbd", [0x7102] = "\xe7\xbe", [0x7109] = "\xe7\xbf",
-  [0x711d] = "\x93\x41", [0x7120] = "\xe7\xc1", [0x7122] = "\xe7\xc0",
-  [0x7139] = "\x93\xd1", [0x713a] = "\xe7\xc2", [0x713b] = "\x8f\x55",
-  [0x713c] = "\x8e\xde", [0x713d] = "\x94\x7a", [0x713e] = "\x92\x91",
-  [0x7142] = "\x8e\xf0", [0x7144] = "\x90\x8c", [0x7146] = "\xe7\xc3",
-  [0x7148] = "\xe7\xc4", [0x7152] = "\x90\x7c", [0x7153] = "\xe7\xc5",
-  [0x7155] = "\xe7\xc6", [0x7159] = "\xe7\xc7", [0x715a] = "\x97\x8f",
-  [0x715c] = "\x8f\x56", [0x7162] = "\xe7\xc9", [0x7163] = "\xe7\xc8",
-  [0x7165] = "\x8d\x79", [0x7167] = "\x8d\x93", [0x7168] = "\x8e\x5f",
-  [0x7172] = "\xe7\xcc", [0x7177] = "\x8f\x86", [0x7179] = "\xe7\xcb",
-  [0x717b] = "\xe7\xca", [0x717d] = "\x91\xe7", [0x7180] = "\x8c\xed",
-  [0x7182] = "\x90\xc1", [0x7187] = "\x94\xae", [0x718c] = "\x8f\x58",
-  [0x7192] = "\xe7\xcd", [0x7194] = "\x8f\xdd", [0x719a] = "\xe7\xd0",
-  [0x719b] = "\xe7\xce", [0x719f] = "\xe7\xcf", [0x71a4] = "\xe7\xd2",
-  [0x71a5] = "\xe7\xd1", [0x71a8] = "\x8f\xf8", [0x71aa] = "\xe7\xd3",
-  [0x71b0] = "\xe7\xd4", [0x71b1] = "\xe7\xd5", [0x71b6] = "\x94\xce",
-  [0x71b7] = "\x8d\xd1", [0x71b8] = "\x8e\xdf", [0x71b9] = "\xe7\xd6",
-  [0x71bb] = "\xe7\xd7", [0x71bc] = "\x97\xa2", [0x71bd] = "\x8f\x64",
-  [0x71be] = "\x96\xec", [0x71bf] = "\x97\xca", [0x71c0] = "\xe7\xd8",
-  [0x71c1] = "\x8b\xe0", [0x71c6] = "\xe7\xd9", [0x71c8] = "\x93\x42",
-  [0x71cb] = "\xe7\xdc", [0x71cc] = "\x8a\x98", [0x71cd] = "\x90\x6a",
-  [0x71cf] = "\xe7\xda", [0x71d1] = "\xe7\xdb", [0x71d3] = "\x92\xde",
-  [0x71d6] = "\x96\x74", [0x71d7] = "\x8b\xfa", [0x71e5] = "\xe7\xde",
-  [0x71e6] = "\xe7\xdf", [0x71ec] = "\xe7\xdd", [0x71ef] = "\xe7\xe1",
-  [0x71fd] = "\x93\xdd", [0x71fe] = "\x8a\x62", [0x7201] = "\xe7\xe5",
-  [0x7204] = "\xe7\xe2", [0x7205] = "\xe7\xe4", [0x720e] = "\xe7\xe0",
-  [0x7219] = "\xe8\x6e", [0x721c] = "\xe7\xe3", [0x7224] = "\x97\xe9",
-  [0x7227] = "\x8c\xd8", [0x722f] = "\xe7\xed", [0x7234] = "\x93\x53",
-  [0x7235] = "\xe7\xe8", [0x7238] = "\xe7\xeb", [0x7239] = "\xe7\xe9",
-  [0x723b] = "\xe7\xee", [0x7240] = "\xe7\xef", [0x7247] = "\xe7\xe7",
-  [0x724a] = "\xe7\xf4", [0x724b] = "\x89\x94", [0x724e] = "\xe7\xe6",
-  [0x7252] = "\x94\xab", [0x7254] = "\xe7\xea", [0x7256] = "\x8f\xde",
-  [0x7261] = "\x8d\x7a", [0x726e] = "\x96\x67", [0x7270] = "\x8b\xe2",
-  [0x7273] = "\x8f\x65", [0x7275] = "\x93\xba", [0x7281] = "\x91\x4c",
-  [0x7283] = "\xe7\xf2", [0x7285] = "\xe7\xec", [0x7286] = "\xe7\xf1",
-  [0x7288] = "\x96\xc1", [0x728a] = "\x92\xb6", [0x728b] = "\xe7\xf3",
-  [0x728c] = "\xe7\xf0", [0x729d] = "\x91\x4b", [0x72a7] = "\xe7\xf7",
-  [0x72a9] = "\xe7\xf6", [0x72bf] = "\xe7\xf5", [0x72c2] = "\x96\x4e",
-  [0x72d4] = "\x8f\x9b", [0x72d9] = "\xe7\xf8", [0x72da] = "\x95\xdd",
-  [0x72dd] = "\x89\x73", [0x72e2] = "\x95\x65", [0x72e3] = "\x92\x92",
-  [0x72e8] = "\x8b\x98", [0x72ea] = "\xe7\xfa", [0x72ec] = "\x8d\x7c",
-  [0x72f6] = "\x8e\x4b", [0x72ff] = "\xe7\xf9", [0x7300] = "\x90\x8d",
-  [0x7308] = "\x90\x8e", [0x7309] = "\xe8\x40", [0x730a] = "\xe8\x42",
-  [0x7310] = "\x8f\xf9", [0x7312] = "\xe8\x41", [0x7313] = "\xe8\x43",
-  [0x7316] = "\x8b\xd1", [0x7318] = "\x95\x64", [0x731b] = "\x8e\xe0",
-  [0x731c] = "\x98\x42", [0x731e] = "\xe7\xfc", [0x731f] = "\x8d\xf6",
-  [0x7322] = "\x98\x5e", [0x7325] = "\xe8\x45", [0x732a] = "\xe8\x44",
-  [0x732b] = "\xe8\x46", [0x7334] = "\xe7\xfb", [0x733b] = "\x93\xe7",
-  [0x733d] = "\x93\x74", [0x7344] = "\x92\xd5", [0x7346] = "\xe8\x4b",
-  [0x734b] = "\x92\x62", [0x734c] = "\xe8\x47", [0x7350] = "\xe8\x48",
-  [0x735c] = "\x8c\x4c", [0x735e] = "\xe8\x4a", [0x7365] = "\x8c\xae",
-  [0x736c] = "\xe8\x49", [0x736e] = "\x8f\xdf", [0x737c] = "\x8a\x99",
-  [0x7384] = "\xe8\x4f", [0x7386] = "\x8d\xbd", [0x7387] = "\x91\x99",
-  [0x738a] = "\x92\xc8", [0x7397] = "\x8a\x5a", [0x739c] = "\xe8\x4d",
-  [0x739d] = "\xe8\x4e", [0x739e] = "\x92\xc1", [0x73a0] = "\xe8\x4c",
-  [0x73a9] = "\xe8\x50", [0x73b3] = "\xe8\x56", [0x73b8] = "\xe8\x59",
-  [0x73c0] = "\xe8\x58", [0x73c1] = "\x93\x4c", [0x73c6] = "\xe8\x51",
-  [0x73c7] = "\xe8\x52", [0x73c8] = "\xe8\x55", [0x73cd] = "\xe8\x57",
-  [0x73d1] = "\x8b\xbe", [0x73d4] = "\xe8\x5a", [0x73d5] = "\xe8\x54",
-  [0x73d8] = "\xe8\x53", [0x73f3] = "\xe8\x5e", [0x73f7] = "\xe8\x5f",
-  [0x7400] = "\xe8\x60", [0x7403] = "\xe8\x5d", [0x7404] = "\xe8\x5c",
-  [0x7408] = "\x8f\xe0", [0x7409] = "\x93\xa8", [0x740a] = "\xe8\x5b",
-  [0x7411] = "\xe8\x64", [0x741b] = "\xe8\x62", [0x7425] = "\xe8\x63",
-  [0x7426] = "\xe8\x61", [0x7428] = "\x91\xf6", [0x742a] = "\xe8\x65",
-  [0x7431] = "\xe8\x66", [0x7434] = "\xe8\x68", [0x7441] = "\x8a\xd3",
-  [0x7442] = "\xe8\x67", [0x7443] = "\x96\xf8", [0x744a] = "\xe8\x73",
-  [0x744b] = "\xe8\x69", [0x744e] = "\xe8\x6c", [0x7450] = "\xe8\x6a",
-  [0x7452] = "\xe8\x6b", [0x745a] = "\xe8\x6d", [0x7460] = "\xe8\x6f",
-  [0x7465] = "\xe8\x70", [0x7467] = "\xe8\x71", [0x746c] = "\xe8\x74",
-  [0x746d] = "\xe8\x72", [0x746e] = "\xe8\x75", [0x746f] = "\xe8\x77",
-  [0x7471] = "\xe8\x76", [0x7567] = "\x92\xb7", [0x7570] = "\x96\xe5",
-  [0x7572] = "\xe8\x78", [0x7573] = "\x91\x4d", [0x7577] = "\xe8\x79",
-  [0x7579] = "\x95\xc2", [0x757a] = "\xe8\x7a", [0x757b] = "\x8a\x4a",
-  [0x757f] = "\x89\x5b", [0x7581] = "\x8a\xd5", [0x7583] = "\x8a\xd4",
-  [0x7584] = "\xe8\x7b", [0x7586] = "\xe8\x7c", [0x7588] = "\xe8\x7d",
-  [0x7589] = "\xe8\x7e", [0x7590] = "\xe8\x80", [0x7592] = "\x8a\xd6",
-  [0x7593] = "\x8a\x74", [0x7594] = "\x8d\x7d", [0x7595] = "\x94\xb4",
-  [0x7597] = "\xe8\x82", [0x7598] = "\xe8\x81", [0x759d] = "\xe8\x83",
-  [0x75a2] = "\x89\x7b", [0x75a9] = "\xe8\x86", [0x75ab] = "\xe8\x85",
-  [0x75ac] = "\xe8\x84", [0x75ae] = "\xe8\x87", [0x75b3] = "\xe8\x8a",
-  [0x75b7] = "\x88\xc5", [0x75ba] = "\xe8\x88", [0x75bc] = "\xe8\x8c",
-  [0x75bd] = "\xe8\x8b", [0x75c4] = "\xe8\x8e", [0x75c5] = "\xe8\x8d",
-  [0x75c6] = "\xe8\x8f", [0x75c8] = "\x93\xac", [0x75cc] = "\xe8\x90",
-  [0x75d1] = "\xe8\x91", [0x75d2] = "\xe8\x93", [0x75d5] = "\xe8\x92",
-  [0x760c] = "\x95\x8c", [0x7611] = "\xe8\x94", [0x7618] = "\xe8\x95",
-  [0x761a] = "\x8d\xe3", [0x761e] = "\xe8\x96", [0x761f] = "\xe8\x97",
-  [0x7622] = "\x96\x68", [0x762b] = "\x91\x6a", [0x762f] = "\x88\xa2",
-  [0x7630] = "\x91\xc9", [0x7632] = "\xe8\x98", [0x7634] = "\x95\x8d",
-  [0x763b] = "\xe8\x9b", [0x763c] = "\xe8\x99", [0x763d] = "\x8d\x7e",
-  [0x763f] = "\xe8\x9a", [0x7640] = "\x8c\xc0", [0x764b] = "\x95\xc3",
-  [0x764c] = "\xe8\x9d", [0x764d] = "\xe8\x9f", [0x764e] = "\xe8\x9e",
-  [0x764f] = "\xe8\xa0", [0x7652] = "\x89\x40", [0x7653] = "\x90\x77",
-  [0x7654] = "\x8f\x9c", [0x7655] = "\x8a\xd7", [0x7656] = "\xe8\xa1",
-  [0x765a] = "\x94\x86", [0x765c] = "\xe8\xa3", [0x7660] = "\x89\x41",
-  [0x7662] = "\xe8\xa2", [0x7663] = "\x92\xc2", [0x7665] = "\x97\xcb",
-  [0x7666] = "\x93\xa9", [0x7667] = "\xe8\x9c", [0x7668] = "\x97\xa4",
-  [0x766a] = "\x8c\xaf", [0x766d] = "\x97\x7a", [0x7675] = "\x8b\xf7",
-  [0x7676] = "\x97\xb2", [0x7678] = "\x8c\x47", [0x767a] = "\x91\xe0",
-  [0x767b] = "\xe4\x40", [0x767d] = "\xe8\xa4", [0x767e] = "\x8a\x4b",
-  [0x767f] = "\x90\x8f", [0x7684] = "\x8a\x75", [0x7685] = "\xe8\xa6",
-  [0x7687] = "\xe8\xa7", [0x7688] = "\xe8\xa5", [0x7689] = "\x8c\x84",
-  [0x768b] = "\x8d\xdb", [0x768c] = "\x8f\xe1", [0x7690] = "\x89\x42",
-  [0x7693] = "\x97\xd7", [0x7697] = "\xe8\xa9", [0x7698] = "\xe7\xac",
-  [0x769a] = "\xe8\xa8", [0x76a0] = "\xe8\xac", [0x76a1] = "\xe8\xaa",
-  [0x76a2] = "\xe8\xab", [0x76a4] = "\xe8\xad", [0x76a6] = "\xe8\xae",
-  [0x76a7] = "\x97\xea", [0x76a8] = "\xe8\xaf", [0x76a9] = "\xe8\xb0",
-  [0x76ab] = "\x90\xc7", [0x76ac] = "\x94\xb9", [0x76b0] = "\x90\x9d",
-  [0x76b1] = "\x8a\xe5", [0x76b4] = "\x97\x59", [0x76b5] = "\x89\xeb",
-  [0x76b6] = "\x8f\x57", [0x76b7] = "\x8c\xd9", [0x76b9] = "\xe8\xb3",
-  [0x76bb] = "\xe8\xb2", [0x76bc] = "\x8e\x93", [0x76bd] = "\xe8\xb4",
-  [0x76be] = "\xe8\xb1", [0x76c1] = "\x8e\x47", [0x76c5] = "\xe8\xb8",
-  [0x76c6] = "\xe5\xab", [0x76c9] = "\x99\xd4", [0x76cb] = "\x90\x97",
-  [0x76cc] = "\xe8\xb6", [0x76d2] = "\x97\xa3", [0x76d3] = "\x93\xef",
-  [0x76d8] = "\x89\x4a", [0x76da] = "\x90\xe1", [0x76db] = "\x8e\xb4",
-  [0x76e0] = "\x95\xb5", [0x76e2] = "\x89\x5f", [0x76e6] = "\x97\xeb",
-  [0x76e7] = "\x97\x8b", [0x76e9] = "\xe8\xb9", [0x76eb] = "\x93\x64",
-  [0x76f0] = "\x8e\xf9", [0x76f4] = "\xe8\xba", [0x76f6] = "\xe8\xbb",
-  [0x76f7] = "\x90\x6b", [0x76f8] = "\xe8\xbc", [0x76fa] = "\x97\xec",
-  [0x76fd] = "\xe8\xb7", [0x76fe] = "\xe8\xbe", [0x76ff] = "\xe8\xc0",
-  [0x7701] = "\xe8\xbf", [0x7703] = "\xe8\xbd", [0x7706] = "\xe8\xc1",
-  [0x7709] = "\xe8\xc2", [0x770c] = "\x91\x9a", [0x770e] = "\x89\xe0",
-  [0x7714] = "\xe8\xc3", [0x7717] = "\x96\xb6", [0x771a] = "\xe8\xc4",
-  [0x7720] = "\xe8\xc5", [0x7722] = "\x98\x49", [0x7728] = "\x9e\x50",
-  [0x7729] = "\xe8\xc6", [0x772d] = "\xe8\xc7", [0x772e] = "\xe8\xc8",
-  [0x7732] = "\xe8\xcc", [0x7734] = "\xe8\xc9", [0x7736] = "\xe8\xca",
-  [0x7738] = "\xe8\xcb", [0x7739] = "\xe8\xcd", [0x7742] = "\x90\xc2",
-  [0x7746] = "\x96\xf5", [0x7749] = "\x90\xc3", [0x774c] = "\xe8\xce",
-  [0x774e] = "\x94\xf1", [0x7750] = "\xe8\xcf", [0x7751] = "\xea\x72",
-  [0x7752] = "\x96\xca", [0x7754] = "\xe8\xd0", [0x7756] = "\xe8\xd1",
-  [0x7758] = "\xe8\xd2", [0x7759] = "\x8a\x76", [0x775b] = "\xe8\xd4",
-  [0x775d] = "\x90\x78", [0x7761] = "\xe8\xd5", [0x7764] = "\x8c\x43",
-  [0x7769] = "\xe8\xd6", [0x776a] = "\xe8\xda", [0x776c] = "\xe8\xd8",
-  [0x7771] = "\xe8\xd9", [0x7774] = "\x8a\x93", [0x7775] = "\xe8\xd7",
-  [0x7776] = "\xe8\xdb", [0x777b] = "\xe8\xdc", [0x777d] = "\x88\xc6",
-  [0x777f] = "\xe8\xdd", [0x7780] = "\xe8\xde", [0x7788] = "\x8f\xe2",
-  [0x778c] = "\xe8\xdf", [0x7790] = "\x8b\x66", [0x7793] = "\xe8\xe2",
-  [0x7796] = "\xe8\xe1", [0x7798] = "\xe8\xe0", [0x779b] = "\xe6\x91",
-  [0x779d] = "\x95\xda", [0x77a3] = "\xe8\xe3", [0x77a4] = "\xe8\xe4",
-  [0x77b3] = "\xe8\xe5", [0x77b6] = "\xe8\xe6", [0x77b8] = "\xe8\xe7",
-  [0x77bb] = "\xe8\xe8", [0x77c3] = "\x8a\xd8", [0x77cc] = "\xe8\xe9",
-  [0x77dd] = "\xe8\xea", [0x77de] = "\x94\x42", [0x77e2] = "\xe8\xec",
-  [0x77e3] = "\x89\xb9", [0x77e5] = "\xe8\xef", [0x77e6] = "\xe8\xee",
-  [0x77eb] = "\x89\x43", [0x77ef] = "\x8b\xbf", [0x77f1] = "\x95\xc5",
-  [0x77f2] = "\x92\xb8", [0x77f3] = "\x8d\xa0", [0x77f5] = "\x8d\x80",
-  [0x77f6] = "\x8f\x87", [0x77f8] = "\x90\x7b", [0x77fc] = "\xe8\xf1",
-  [0x77ff] = "\xe8\xf0", [0x7800] = "\x97\x61", [0x7801] = "\x8a\xe6",
-  [0x7802] = "\x94\xd0", [0x7803] = "\x93\xda", [0x7807] = "\x90\x9c",
-  [0x7808] = "\x97\xcc", [0x780a] = "\x8c\x7a", [0x7811] = "\xe8\xf4",
-  [0x7814] = "\xe8\xf3", [0x781c] = "\x96\x6a", [0x781d] = "\x93\xaa",
-  [0x7824] = "\x89\x6f", [0x7827] = "\xe8\xf5", [0x7828] = "\xe8\xf2",
-  [0x782b] = "\x95\x70", [0x782c] = "\x97\x8a", [0x782d] = "\xe8\xf6",
-  [0x7836] = "\xe8\xf7", [0x783b] = "\xe8\xf9", [0x783c] = "\x91\xe8",
-  [0x783d] = "\x8a\x7a", [0x783e] = "\x8a\x7b", [0x783f] = "\xe8\xf8",
-  [0x7844] = "\x8a\xe7", [0x7845] = "\x8c\xb0", [0x7848] = "\x8a\xe8",
-  [0x784b] = "\x93\x5e", [0x784e] = "\x97\xde", [0x7857] = "\x8c\xda",
-  [0x785b] = "\xe8\xfa", [0x785f] = "\xe8\xfb", [0x7860] = "\xe8\xfc",
-  [0x7861] = "\xe9\x40", [0x7863] = "\xe9\x42", [0x7864] = "\xe9\x41",
-  [0x7898] = "\x95\x97", [0x789a] = "\xe9\x43", [0x789f] = "\xe9\x44",
-  [0x78a1] = "\xe9\x45", [0x78a6] = "\xe9\x46", [0x78b3] = "\xe9\x48",
-  [0x78b4] = "\xe9\x47", [0x78b6] = "\xe9\x49", [0x78cb] = "\x94\xf2",
-  [0x78cc] = "\xe3\xca", [0x78cf] = "\x90\x48", [0x78d2] = "\x8b\x51",
-  [0x78d9] = "\xe9\x4a", [0x78db] = "\xe9\x4b", [0x78dd] = "\x99\xaa",
-  [0x78de] = "\x9f\x5a", [0x78df] = "\x94\xd1", [0x78e2] = "\x88\xf9",
-  [0x78e4] = "\x88\xb9", [0x78ec] = "\x8e\x94", [0x78ed] = "\x96\x4f",
-  [0x78ee] = "\x8f\xfc", [0x78f3] = "\xe9\x4c", [0x78f5] = "\x96\xdd",
-  [0x78f9] = "\xe9\x4d", [0x78fa] = "\x97\x7b", [0x78fc] = "\x89\x61",
-  [0x7900] = "\x8e\x60", [0x7902] = "\xe9\x4e", [0x7903] = "\x89\xec",
-  [0x7904] = "\xe9\x4f", [0x7908] = "\xe9\x50", [0x790d] = "\xe9\x52",
-  [0x790e] = "\xe9\x53", [0x7910] = "\xe9\x55", [0x7911] = "\xe9\x51",
-  [0x7914] = "\xe9\x54", [0x7918] = "\x8a\xd9", [0x791c] = "\xe9\x56",
-  [0x791e] = "\xe9\x57", [0x792d] = "\xe9\x58", [0x792e] = "\xe9\x59",
-  [0x7932] = "\xe9\x5a", [0x7935] = "\xe9\x5c", [0x7939] = "\xe9\x5b",
-  [0x793b] = "\xe9\x5e", [0x793c] = "\xe9\x61", [0x7940] = "\xe9\x5d",
-  [0x7941] = "\xe9\x5f", [0x7942] = "\xe9\x60", [0x7945] = "\xe9\x62",
-  [0x7947] = "\x8b\xc0", [0x7986] = "\x8e\xf1", [0x7987] = "\xe9\x63",
-  [0x7988] = "\xe9\x64", [0x7989] = "\x8d\x81", [0x7995] = "\xe9\x65",
-  [0x7998] = "\x8a\x5d", [0x799c] = "\x94\x6e", [0x799d] = "\xe9\x66",
-  [0x799e] = "\xe9\x67", [0x79a3] = "\x92\x79", [0x79a4] = "\x93\xe9",
-  [0x79ac] = "\xe9\x68", [0x79b1] = "\x94\x9d", [0x79b4] = "\x91\xca",
-  [0x79b5] = "\x89\x77", [0x79b6] = "\x8b\xec", [0x79b8] = "\x8b\xed",
-  [0x79c0] = "\x92\x93", [0x79c1] = "\xe9\x6d", [0x79c2] = "\x8b\xee",
-  [0x79c5] = "\x89\xed", [0x79c8] = "\xe9\x6c", [0x79cb] = "\xe9\x6a",
-  [0x79cd] = "\xe9\x6b", [0x79cf] = "\xe9\x69", [0x79d2] = "\xe9\x77",
-  [0x79dd] = "\xe9\x6e", [0x79de] = "\xe9\x6f", [0x79e1] = "\xe9\x70",
-  [0x79e2] = "\xe9\x71", [0x79e8] = "\xe9\x73", [0x79eb] = "\xe9\x72",
-  [0x79ef] = "\x8f\x78", [0x79f1] = "\xe9\x74", [0x79f5] = "\xe9\x76",
-  [0x79fe] = "\x8b\x52", [0x79ff] = "\xe9\x75", [0x7a02] = "\x91\x9b",
-  [0x7a03] = "\x8c\xb1", [0x7a09] = "\xe9\x78", [0x7a18] = "\x91\xcb",
-  [0x7a1b] = "\xe9\x79", [0x7a20] = "\x93\xab", [0x7a27] = "\xe9\x7a",
-  [0x7a2e] = "\xe9\x80", [0x7a30] = "\xe9\x7d", [0x7a32] = "\xe9\x7c",
-  [0x7a33] = "\xe9\x7e", [0x7a35] = "\xe9\x7b", [0x7a3d] = "\xe9\x82",
-  [0x7a45] = "\xe9\x81", [0x7a47] = "\xe9\x84", [0x7a4a] = "\x8b\xc1",
-  [0x7a4b] = "\xe9\x83", [0x7a4f] = "\xe9\x85", [0x7a52] = "\xe9\x86",
-  [0x7a54] = "\xe9\x88", [0x7a55] = "\xe9\x87", [0x7a59] = "\xe9\x89",
-  [0x7a5a] = "\xe9\x8b", [0x7a5b] = "\xe9\x8a", [0x7a98] = "\x8d\x9c",
-  [0x7a9d] = "\xe9\x8c", [0x7aa0] = "\xe9\x8d", [0x7aa8] = "\x8a\x5b",
-  [0x7aac] = "\xe9\x8e", [0x7ab0] = "\xe9\x8f", [0x7ab4] = "\x90\x91",
-  [0x7abf] = "\xe9\x90", [0x7ac1] = "\xe9\x91", [0x7ac3] = "\xe9\x92",
-  [0x7ac4] = "\xe9\x93", [0x7ac8] = "\x8d\x82", [0x7ace] = "\xe9\x94",
-  [0x7acf] = "\xe9\x95", [0x7ad2] = "\xe9\x96", [0x7ad3] = "\xe9\x97",
-  [0x7ad6] = "\xe9\x98", [0x7ada] = "\x94\xaf", [0x7adb] = "\xe9\x9a",
-  [0x7add] = "\x95\x45", [0x7ade] = "\xe9\x9b", [0x7adf] = "\xe9\x99",
-  [0x7ae1] = "\xe9\x9d", [0x7ae4] = "\xe9\x9c", [0x7ae7] = "\xe9\x9e",
-  [0x7aeb] = "\xe9\x9f", [0x7af6] = "\xe9\xa0", [0x7b08] = "\xe9\xa1",
-  [0x7b0a] = "\xe9\xa2", [0x7b0f] = "\xe9\xa3", [0x7b12] = "\xe9\xa4",
-  [0x7b13] = "\xe9\xa5", [0x7b15] = "\xe9\xa6", [0x7b17] = "\xe9\xa7",
-  [0x7b18] = "\xe9\xa8", [0x7b19] = "\xe9\xa9", [0x7b1a] = "\xe9\xaa",
-  [0x7b1e] = "\xe9\xab", [0x7b1f] = "\xe9\xac", [0x7b21] = "\x9f\x54",
-  [0x7b22] = "\xe9\xad", [0x7b2b] = "\xe2\xf6", [0x7b2c] = "\x8b\x53",
-  [0x7b31] = "\x8a\x40", [0x7b32] = "\x8d\xb0", [0x7b33] = "\xe9\xaf",
-  [0x7b34] = "\xe9\xae", [0x7b35] = "\x96\xa3", [0x7b3d] = "\xe9\xb1",
-  [0x7b3e] = "\xe9\xb2", [0x7b3f] = "\xe9\xb0", [0x7b41] = "\xe9\xb3",
-  [0x7b44] = "\x96\x82", [0x7b48] = "\xe9\xb4", [0x7b4a] = "\x8b\x9b",
-  [0x7b5f] = "\x98\x44", [0x7b64] = "\xe9\xb5", [0x7b73] = "\xe9\xb7",
-  [0x7b7e] = "\x88\xbc", [0x7b81] = "\xe9\xb8", [0x7b82] = "\x95\xa9",
-  [0x7b83] = "\xe9\xb6", [0x7b86] = "\xe9\xb9", [0x7b87] = "\xe9\xba",
-  [0x7b8f] = "\xe9\xbb", [0x7b90] = "\xe9\xbc", [0x7b98] = "\xe9\xbd",
-  [0x7b9a] = "\x96\x8e", [0x7b9b] = "\x8e\x4c", [0x7b9d] = "\x8d\xf8",
-  [0x7b9e] = "\x91\x4e", [0x7ba4] = "\xe9\xbe", [0x7ba9] = "\xe9\xc1",
-  [0x7bb0] = "\xe9\xbf", [0x7bb6] = "\xe9\xc2", [0x7bb9] = "\x8c\xef",
-  [0x7bba] = "\xe9\xc0", [0x7bbf] = "\xe9\xc3", [0x7bc1] = "\xe9\xc4",
-  [0x7bc2] = "\xe9\xc5", [0x7bc4] = "\xe9\xc9", [0x7bc6] = "\x8e\x49",
-  [0x7bcb] = "\x91\xe2", [0x7bd1] = "\xe9\xca", [0x7bd2] = "\xe9\xc7",
-  [0x7bd3] = "\xe9\xc6", [0x7bd4] = "\xe9\xc8", [0x7bd8] = "\x8c\x7e",
-  [0x7be0] = "\xe9\xce", [0x7be1] = "\xe9\xcd", [0x7be2] = "\xe9\xcc",
-  [0x7be5] = "\x88\xb1", [0x7bf4] = "\xe9\xd8", [0x7bf6] = "\xe9\xd4",
-  [0x7bf8] = "\xe9\xd5", [0x7bf9] = "\xe9\xd1", [0x7bfa] = "\xe9\xd7",
-  [0x7bfc] = "\xe9\xd3", [0x7bfd] = "\x8a\x82", [0x7c00] = "\x98\x6b",
-  [0x7c02] = "\xe9\xd6", [0x7c03] = "\xe9\xd2", [0x7c04] = "\xe9\xd0",
-  [0x7c05] = "\xe9\xcf", [0x7c0b] = "\xe9\xda", [0x7c11] = "\xe9\xdd",
-  [0x7c14] = "\xe9\xdc", [0x7c15] = "\xe9\xdb", [0x7c1d] = "\x95\x68",
-  [0x7c1e] = "\xe9\xd9", [0x7c1f] = "\x88\xf1", [0x7c20] = "\xe9\xde",
-  [0x7c22] = "\xe9\xe0", [0x7c29] = "\x8a\x8f", [0x7c2a] = "\xe9\xcb",
-  [0x7c2b] = "\x89\x56", [0x7c2e] = "\xe9\xe2", [0x7c36] = "\xe9\xe1",
-  [0x7c37] = "\xe9\xdf", [0x7c38] = "\x92\x4c", [0x7c42] = "\x96\x90",
-  [0x7c47] = "\x97\xd8", [0x7c4a] = "\xe9\xe3", [0x7c50] = "\xe9\xe4",
-  [0x7c57] = "\xe9\xe5", [0x7c66] = "\xe9\xe6", [0x7c68] = "\xe9\xe7",
-  [0x7cd5] = "\x92\xb9", [0x7cd7] = "\xe9\xe8", [0x7cd9] = "\x94\xb5",
-  [0x7cdb] = "\xe9\xed", [0x7cdc] = "\xe9\xe9", [0x7ce0] = "\xe9\xea",
-  [0x7ce3] = "\x96\x50", [0x7ce4] = "\x96\xc2", [0x7ce6] = "\x93\xce",
-  [0x7cf3] = "\xe9\xee", [0x7cf6] = "\xe9\xef", [0x7cf7] = "\x93\xbc",
-  [0x7cf8] = "\xe9\xec", [0x7cf9] = "\xe9\xeb", [0x7cfe] = "\x89\xa8",
-  [0x7d02] = "\xe9\xf7", [0x7d05] = "\xe9\xf6", [0x7d0b] = "\x89\x95",
-  [0x7d0f] = "\xe9\xf4", [0x7d13] = "\xe9\xf3", [0x7d16] = "\xe9\xf1",
-  [0x7d18] = "\x8a\x9b", [0x7d1a] = "\xe9\xf0", [0x7d1b] = "\x8e\xb0",
-  [0x7d1c] = "\x89\xa7", [0x7d2b] = "\x8d\x83", [0x7d2e] = "\xe9\xfa",
-  [0x7d2f] = "\xe9\xf9", [0x7d31] = "\xe9\xf8", [0x7d34] = "\xe9\xf5",
-  [0x7d36] = "\xe9\xfb", [0x7d38] = "\xe9\xfc", [0x7d40] = "\xea\x44",
-  [0x7d41] = "\xea\x43", [0x7d49] = "\xea\x45", [0x7d4c] = "\x89\x4c",
-  [0x7d4d] = "\xea\x40", [0x7d4e] = "\xea\x41", [0x7d50] = "\x8d\x94",
-  [0x7d51] = "\x96\xb7", [0x7d54] = "\xea\x42", [0x7d5c] = "\x96\x51",
-  [0x7d5f] = "\xea\x4a", [0x7d62] = "\xea\x46", [0x7d6a] = "\xea\x4b",
-  [0x7d77] = "\xea\x48", [0x7d79] = "\xea\x47", [0x7d7f] = "\x8c\x7b",
-  [0x7d8a] = "\xea\x4c", [0x7d94] = "\xea\x4d", [0x7d99] = "\xea\x4e",
-  [0x7d9b] = "\xea\x49", [0x7d9f] = "\xe9\xf2", [0x7da2] = "\xea\x4f",
-  [0x7da4] = "\x92\xdf", [0x7da8] = "\xea\x53", [0x7daa] = "\xea\x54",
-  [0x7dab] = "\xea\x52", [0x7db1] = "\xea\x51", [0x7db2] = "\xea\x57",
-  [0x7db4] = "\xea\x50", [0x7db6] = "\xea\x55", [0x7dbf] = "\xea\x56",
-  [0x7dc3] = "\xea\x59", [0x7dc9] = "\xea\x58", [0x7dd6] = "\xea\x5b",
-  [0x7ddd] = "\xea\x5c", [0x7ddf] = "\xea\x5d", [0x7de2] = "\x98\x68",
-  [0x7de8] = "\xea\x5a", [0x7de9] = "\x91\xe9", [0x7dea] = "\x8d\xeb",
-  [0x7ded] = "\xea\x5e", [0x7e0a] = "\xea\x5f", [0x7e0b] = "\xea\x60",
-  [0x7e0e] = "\xea\x61", [0x7e65] = "\xea\x62", [0x7e68] = "\x8c\xb2",
-  [0x7e69] = "\xea\x63", [0x7e6d] = "\xea\x64", [0x7e6f] = "\x8e\xad",
-  [0x7e71] = "\xea\x65", [0x7e78] = "\xea\x66", [0x7e7b] = "\xea\x67",
-  [0x7e7c] = "\xea\x68", [0x7e81] = "\xea\x6b", [0x7e82] = "\xea\x69",
-  [0x7e83] = "\x98\x5b", [0x7e85] = "\xea\x6a", [0x7e87] = "\x97\xed",
-  [0x7e8d] = "\xea\x6c", [0x7e8f] = "\x97\xd9", [0x7e95] = "\xea\x6d",
-  [0x7e96] = "\x94\x9e", [0x7e99] = "\xea\x6e", [0x7e9a] = "\xea\x70",
-  [0x7e9d] = "\xea\x71", [0x7ea8] = "\xea\x6f", [0x7ea9] = "\x8d\x8d",
-  [0x7eaa] = "\x96\xcb", [0x7eab] = "\x96\x83", [0x7eac] = "\x9b\xf5",
-  [0x7eae] = "\x9f\x80", [0x7eaf] = "\x96\x9b", [0x7eb4] = "\x89\xa9",
-  [0x7ebc] = "\xea\x73", [0x7ebd] = "\x8b\x6f", [0x7ebe] = "\xea\x74",
-  [0x7ebf] = "\xea\x75", [0x7ec0] = "\xea\x76", [0x7ec2] = "\x8d\x95",
-  [0x7ec4] = "\xea\x77", [0x7ec8] = "\xe0\xd2", [0x7ec9] = "\x96\xd9",
-  [0x7ecb] = "\x91\xe1", [0x7ecc] = "\xea\x78", [0x7ecd] = "\xea\x7a",
-  [0x7ece] = "\xea\x79", [0x7ed0] = "\xea\x7b", [0x7ed5] = "\xea\x7c",
-  [0x7ed8] = "\xea\x7d", [0x7edf] = "\xea\x7e", [0x7ee4] = "\xea\x80",
-  [0x7ee6] = "\xea\x81", [0x7ee7] = "\xea\x82", [0x7ee9] = "\xea\x83",
-  [0x7eeb] = "\xea\x84", [0x7eec] = "\xea\x85", [0x7eed] = "\xea\x86",
-  [0x7ef7] = "\xea\x87", [0x7ef8] = "\xea\x88", [0x7efe] = "\x93\x43",
-  [0x7f03] = "\x8c\xdb", [0x7f05] = "\xea\x8a", [0x7f10] = "\x91\x6c",
-  [0x7f11] = "\xea\x8b", [0x7f1c] = "\xea\x8c", [0x7f2b] = "\x95\x40",
-  [0x7f2e] = "\xea\x8d", [0x7f3a] = "\xea\x8e", [0x7f3b] = "\xe2\x56",
-  [0x7f3e] = "\xe6\xd8", [0x7f3f] = "\xe8\xeb", [0x7f42] = "\xea\x8f",
-  [0x7f44] = "\xea\x90", [0x7f4f] = "\xea\x92", [0x7f50] = "\xea\x93",
-  [0x7f51] = "\xea\x94", [0x7f52] = "\x97\xee", [0x7f53] = "\xea\x91",
-  [0x7f56] = "\xea\x95", [0x7f57] = "\xea\x96", [0x7f5a] = "\xea\x98",
-  [0x7f5c] = "\xea\x97", [0x7f62] = "\xea\x9a", [0x7f66] = "\xea\x9b",
-  [0x7f67] = "\xea\x99", [0x7f7d] = "\x97\xb4", [0x7f85] = "\xea\x9c",
-  [0x7f8c] = "\xea\x9d", [0x7f8d] = "\xe2\x73", [0x7f90] = "\xea\x9e"
-};
-
-static const char from_ucs4_extra[0x100][2] =
-{
-  [0x0001] = "\x81\x49", [0x0003] = "\x81\x94", [0x0004] = "\x81\x90",
-  [0x0005] = "\x81\x93", [0x0006] = "\x81\x95", [0x0008] = "\x81\x69",
-  [0x0009] = "\x81\x6a", [0x000a] = "\x81\x96", [0x000b] = "\x81\x7b",
-  [0x000c] = "\x81\x43", [0x000e] = "\x81\x44", [0x000f] = "\x81\x5e",
-  [0x0010] = "\x82\x4f", [0x0011] = "\x82\x50", [0x0012] = "\x82\x51",
-  [0x0013] = "\x82\x52", [0x0014] = "\x82\x53", [0x0015] = "\x82\x54",
-  [0x0016] = "\x82\x55", [0x0017] = "\x82\x56", [0x0018] = "\x82\x57",
-  [0x0019] = "\x82\x58", [0x001a] = "\x81\x46", [0x001b] = "\x81\x47",
-  [0x001c] = "\x81\x83", [0x001d] = "\x81\x81", [0x001e] = "\x81\x84",
-  [0x001f] = "\x81\x48", [0x0020] = "\x81\x97", [0x0021] = "\x82\x60",
-  [0x0022] = "\x82\x61", [0x0023] = "\x82\x62", [0x0024] = "\x82\x63",
-  [0x0025] = "\x82\x64", [0x0026] = "\x82\x65", [0x0027] = "\x82\x66",
-  [0x0028] = "\x82\x67", [0x0029] = "\x82\x68", [0x002a] = "\x82\x69",
-  [0x002b] = "\x82\x6a", [0x002c] = "\x82\x6b", [0x002d] = "\x82\x6c",
-  [0x002e] = "\x82\x6d", [0x002f] = "\x82\x6e", [0x0030] = "\x82\x6f",
-  [0x0031] = "\x82\x70", [0x0032] = "\x82\x71", [0x0033] = "\x82\x72",
-  [0x0034] = "\x82\x73", [0x0035] = "\x82\x74", [0x0036] = "\x82\x75",
-  [0x0037] = "\x82\x76", [0x0038] = "\x82\x77", [0x0039] = "\x82\x78",
-  [0x003a] = "\x82\x79", [0x003b] = "\x81\x6d", [0x003c] = "\x81\x5f",
-  [0x003d] = "\x81\x6e", [0x003e] = "\x81\x4f", [0x003f] = "\x81\x51",
-  [0x0040] = "\x81\x4d", [0x0041] = "\x82\x81", [0x0042] = "\x82\x82",
-  [0x0043] = "\x82\x83", [0x0044] = "\x82\x84", [0x0045] = "\x82\x85",
-  [0x0046] = "\x82\x86", [0x0047] = "\x82\x87", [0x0048] = "\x82\x88",
-  [0x0049] = "\x82\x89", [0x004a] = "\x82\x8a", [0x004b] = "\x82\x8b",
-  [0x004c] = "\x82\x8c", [0x004d] = "\x82\x8d", [0x004e] = "\x82\x8e",
-  [0x004f] = "\x82\x8f", [0x0050] = "\x82\x90", [0x0051] = "\x82\x91",
-  [0x0052] = "\x82\x92", [0x0053] = "\x82\x93", [0x0054] = "\x82\x94",
-  [0x0055] = "\x82\x95", [0x0056] = "\x82\x96", [0x0057] = "\x82\x97",
-  [0x0058] = "\x82\x98", [0x0059] = "\x82\x99", [0x005a] = "\x82\x9a",
-  [0x005b] = "\x81\x6f", [0x005c] = "\x81\x62", [0x005d] = "\x81\x70",
-  [0x005e] = "\x00\x00", [0x005f] = "\x00\x00",
-  [0x0060] = "\x00\x00", [0x0061] = "\xa1\x00", [0x0062] = "\xa2\x00",
-  [0x0063] = "\xa3\x00", [0x0064] = "\xa4\x00", [0x0065] = "\xa5\x00",
-  [0x0066] = "\xa6\x00", [0x0067] = "\xa7\x00", [0x0068] = "\xa8\x00",
-  [0x0069] = "\xa9\x00", [0x006a] = "\xaa\x00", [0x006b] = "\xab\x00",
-  [0x006c] = "\xac\x00", [0x006d] = "\xad\x00", [0x006e] = "\xae\x00",
-  [0x006f] = "\xaf\x00", [0x0070] = "\xb0\x00", [0x0071] = "\xb1\x00",
-  [0x0072] = "\xb2\x00", [0x0073] = "\xb3\x00", [0x0074] = "\xb4\x00",
-  [0x0075] = "\xb5\x00", [0x0076] = "\xb6\x00", [0x0077] = "\xb7\x00",
-  [0x0078] = "\xb8\x00", [0x0079] = "\xb9\x00", [0x007a] = "\xba\x00",
-  [0x007b] = "\xbb\x00", [0x007c] = "\xbc\x00", [0x007d] = "\xbd\x00",
-  [0x007e] = "\xbe\x00", [0x007f] = "\xbf\x00", [0x0080] = "\xc0\x00",
-  [0x0081] = "\xc1\x00", [0x0082] = "\xc2\x00", [0x0083] = "\xc3\x00",
-  [0x0084] = "\xc4\x00", [0x0085] = "\xc5\x00", [0x0086] = "\xc6\x00",
-  [0x0087] = "\xc7\x00", [0x0088] = "\xc8\x00", [0x0089] = "\xc9\x00",
-  [0x008a] = "\xca\x00", [0x008b] = "\xcb\x00", [0x008c] = "\xcc\x00",
-  [0x008d] = "\xcd\x00", [0x008e] = "\xce\x00", [0x008f] = "\xcf\x00",
-  [0x0090] = "\xd0\x00", [0x0091] = "\xd1\x00", [0x0092] = "\xd2\x00",
-  [0x0093] = "\xd3\x00", [0x0094] = "\xd4\x00", [0x0095] = "\xd5\x00",
-  [0x0096] = "\xd6\x00", [0x0097] = "\xd7\x00", [0x0098] = "\xd8\x00",
-  [0x0099] = "\xd9\x00", [0x009a] = "\xda\x00", [0x009b] = "\xdb\x00",
-  [0x009c] = "\xdc\x00", [0x009d] = "\xdd\x00", [0x009e] = "\xde\x00",
-  [0x009f] = "\xdf\x00",
-  [0x00e0] = "\x81\x91", [0x00e1] = "\x81\x92", [0x00e2] = "\x81\xCA",
-  [0x00e3] = "\x81\x50", [0x00e5] = "\x81\x8f"
-};
-
-/* Definitions used in the body of the `gconv' function.  */
-#define CHARSET_NAME		"SJIS//"
-#define FROM_LOOP		from_sjis
-#define TO_LOOP			to_sjis
-#define DEFINE_INIT		1
-#define DEFINE_FINI		1
-#define MIN_NEEDED_FROM		1
-#define MAX_NEEDED_FROM		2
-#define MIN_NEEDED_TO		4
-
-/* First define the conversion function from SJIS to UCS4.  */
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MAX_NEEDED_INPUT	MAX_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t ch = *inptr;						      \
-									      \
-    if (__builtin_expect (ch, 0) == 0x5c)				      \
-      {									      \
-	ch = 0xa5;							      \
-	++inptr;							      \
-      }									      \
-    else if (__builtin_expect (ch, 0) == 0x7e)				      \
-      {									      \
-	ch = 0x203e;							      \
-	++inptr;							      \
-      }									      \
-    else if (ch < 0x80)							      \
-      ++inptr;								      \
-    else if (ch >= 0xa1 && ch <= 0xdf)					      \
-      {									      \
-	ch = halfkana_to_ucs4[ch - 0xa1];				      \
-	++inptr;							      \
-      }									      \
-    else if (__builtin_expect (ch > 0xea, 0)				      \
-	     || __builtin_expect (ch, 0) == 0xa0			      \
-	     || __builtin_expect (ch <= 0x80, 0))			      \
-      {									      \
-	/* These are illegal.  */					      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    /* This is an illegal character.  */			      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	++inptr;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-    else								      \
-      {									      \
-	/* Two-byte character.  First test whether the next character	      \
-	   is also available.  */					      \
-	uint32_t ch2;							      \
-	uint_fast32_t idx;						      \
-									      \
-	if (__builtin_expect (inptr + 1 >= inend, 0))			      \
-	  {								      \
-	    /* The second character is not available.  Store		      \
-	       the intermediate result.  */				      \
-	    result = __GCONV_INCOMPLETE_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	ch2 = inptr[1];							      \
-	idx = ch * 256 + ch2;						      \
-	if (__builtin_expect (ch2 < 0x40, 0)				      \
-	    || (__builtin_expect (idx > 0x84be, 0) && idx < 0x889f)      \
-	    || (__builtin_expect (idx > 0x88fc, 0) && idx < 0x8940)      \
-	    || (__builtin_expect (idx > 0x9ffc, 0) && idx < 0xe040)      \
-	    || __builtin_expect (idx > 0xeaa4, 0))			      \
-	  {								      \
-	    /* This is illegal.  */					      \
-	    if (! ignore_errors_p ())					      \
-	      {								      \
-	        /* This is an illegal character.  */			      \
-	        result = __GCONV_ILLEGAL_INPUT;				      \
-	        break;							      \
-	      }								      \
-									      \
-	    ++inptr;							      \
-	    ++*irreversible;						      \
-	    continue;							      \
-	  }								      \
-	else								      \
-	  {								      \
-	    /* We could pack the data a bit more dense.  The second	      \
-	       byte will never be 0x7f and it will also be never	      \
-	       >0xfc.  But this would mean yet more `if's.  */		      \
-	    if (idx <= 0x84be)						      \
-	      ch = cjk_block1[(ch - 0x81) * 192 + ch2 - 0x40];		      \
-	    else if (idx <= 0x88fc)					      \
-	      ch = cjk_block2[(ch - 0x88) * 192 + ch2 - 0x9f];		      \
-	    else if (idx <= 0x9ffc)					      \
-	      ch = cjk_block3[(ch - 0x89) * 192 + ch2 - 0x40];		      \
-	    else							      \
-	      ch = cjk_block4[(ch - 0xe0) * 192 + ch2 - 0x40];		      \
-									      \
-	    inptr += 2;							      \
-	  }								      \
-									      \
-	if (__builtin_expect (ch, 1) == 0)				      \
-	  {								      \
-	    /* This is an illegal character.  */			      \
-	    if (! ignore_errors_p ())					      \
-	      {								      \
-	        /* This is an illegal character.  */			      \
-	        result = __GCONV_ILLEGAL_INPUT;				      \
-	        break;							      \
-	      }								      \
-									      \
-	    inptr += 2;							      \
-	    ++*irreversible;						      \
-	    continue;							      \
-	  }								      \
-      }									      \
-									      \
-    put32 (outptr, ch);							      \
-    outptr += 4;							      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-
-
-/* Next, define the other direction.  */
-#define MIN_NEEDED_INPUT	MIN_NEEDED_TO
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_FROM
-#define MAX_NEEDED_OUTPUT	MAX_NEEDED_FROM
-#define LOOPFCT			TO_LOOP
-#define BODY \
-  {									      \
-    uint32_t ch = get32 (inptr);					      \
-    const char *cp;							      \
-									      \
-    if (ch >= (sizeof (from_ucs4_lat1) / sizeof (from_ucs4_lat1[0])))	      \
-      {									      \
-	if (ch >= 0x0391 && ch <= 0x0451)				      \
-	  cp = from_ucs4_greek[ch - 0x391];				      \
-	else if (ch >= 0x2010 && ch <= 0x9fa0)				      \
-	  cp = from_ucs4_cjk[ch - 0x02010];				      \
-	else if (__builtin_expect (ch >= 0xff01, 1)			      \
-		 && __builtin_expect (ch <= 0xffef, 1))			      \
-	  cp = from_ucs4_extra[ch - 0xff00];				      \
-	else								      \
-	  {								      \
-	    UNICODE_TAG_HANDLER (ch, 4);				      \
-	    /* Illegal character.  */					      \
-	    cp = "";							      \
-	  }								      \
-      }									      \
-    else								      \
-      cp = from_ucs4_lat1[ch];						      \
-									      \
-    if (__builtin_expect (cp[0], '\1') == '\0' && ch != 0)		      \
-      {									      \
-	/* Illegal character.  */					      \
-	STANDARD_ERR_HANDLER (4);					      \
-      }									      \
-    else								      \
-      {									      \
-	*outptr = cp[0];						      \
-	/* Now test for a possible second byte and write this if possible.  */\
-	if (cp[1] != '\0')						      \
-	  {								      \
-	    if (__builtin_expect (outptr + 1 >= outend, 0))		      \
-	      {								      \
-		/* The result does not fit into the buffer.  */		      \
-		result = __GCONV_FULL_OUTPUT;				      \
-		break;							      \
-	      }								      \
-	    *++outptr = cp[1];						      \
-	  }								      \
-	++outptr;							      \
-      }									      \
-									      \
-    inptr += 4;								      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-
-
-/* Now define the toplevel functions.  */
-#include <iconv/skeleton.c>
diff --git a/newlib/libc/Makefile.am b/newlib/libc/Makefile.am
deleted file mode 100644
index d0ae37976..000000000
--- a/newlib/libc/Makefile.am
+++ /dev/null
@@ -1,184 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-if HAVE_POSIX_DIR
-POSIX_SUBDIR = posix
-endif
-
-if HAVE_SIGNAL_DIR
-SIGNAL_SUBDIR = signal
-endif
-
-if HAVE_SYSCALL_DIR
-SYSCALLS_SUBDIR = syscalls
-endif
-
-if HAVE_UNIX_DIR
-UNIX_SUBDIR = unix
-endif
-
-if HAVE_STDIO64_DIR
-STDIO64_SUBDIR = stdio64
-endif
-
-# The order of SUBDIRS is important for the integrated documentation.
-# Do not change the order without considering the doc impact.
-SUBDIRS = argz stdlib ctype search stdio $(STDIO64_SUBDIR) string $(SIGNAL_SUBDIR) time locale sys reent \
-	$(extra_dir) errno misc machine $(UNIX_SUBDIR) $(POSIX_SUBDIR) $(SYSCALLS_SUBDIR) .
-
-noinst_DATA = $(CRT0)
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libc.la
-SUBLIBS = \
-	argz/libargz.$(aext) \
-	stdlib/libstdlib.$(aext) \
-	ctype/libctype.$(aext) \
-	search/libsearch.$(aext) \
-	stdio/libstdio.$(aext) \
-	$(LIBC_STDIO64_LIB) \
-	string/libstring.$(aext) \
-	$(LIBC_SIGNAL_LIB) \
-	time/libtime.$(aext) \
-	locale/liblocale.$(aext) \
-	$(LIBC_SYS_LIB) \
-	reent/libreent.$(aext) \
-	$(LIBC_EXTRA_LIB) \
-	errno/liberrno.$(aext) \
-	misc/libmisc.$(aext) \
-	$(LIBC_MACHINE_LIB) \
-	$(LIBC_UNIX_LIB) \
-	$(LIBC_POSIX_LIB) \
-	$(LIBC_SYSCALL_LIB)
-else
-noinst_LIBRARIES = libc.a
-SUBLIBS = \
-	argz/lib.$(aext) \
-	stdlib/lib.$(aext) \
-	ctype/lib.$(aext) \
-	search/lib.$(aext) \
-	stdio/lib.$(aext) \
-	$(LIBC_STDIO64_LIB) \
-	string/lib.$(aext) \
-	$(LIBC_SIGNAL_LIB) \
-	time/lib.$(aext) \
-	locale/lib.$(aext) \
-	$(LIBC_SYS_LIB) \
-	reent/lib.$(aext) \
-	$(LIBC_EXTRA_LIB) \
-	errno/lib.$(aext) \
-	misc/lib.$(aext) \
-	$(LIBC_MACHINE_LIB) \
-	$(LIBC_UNIX_LIB) \
-	$(LIBC_POSIX_LIB) \
-	$(LIBC_SYSCALL_LIB)
-endif
-
-libc_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-libc_la_SOURCES =
-libc_la_LIBADD = $(SUBLIBS)
-libc_la_DEPENDENCIES = $(SUBLIBS)
-else
-libc.a: $(SUBLIBS)
-	rm -f $@
-	rm -rf tmp
-	mkdir tmp
-	cd tmp; \
-	 for i in $(SUBLIBS); do \
-	   $(AR) x ../$$i; \
-	 done; \
-	$(AR) $(AR_FLAGS) ../$@ *.o
-	$(RANLIB) $@
-	rm -rf tmp
-endif # USE_LIBTOOL
-
-$(SUBLIBS): ; @true
-
-crt0.o: sys/crt0.o
-	rm -f $@
-	ln sys/crt0.o $@ >/dev/null 2>/dev/null || cp sys/crt0.o $@
-
-sys/crt0.o: ; @true
-
-info_TEXINFOS = libc.texinfo
-
-# This is a list of the stmp-def files in each subdirectory which
-# builds .def files.  We don't list subdirectories which don't build
-# .def files; if the list of subdirectories changes, we must change
-# this as well.
-SUBDEFS = \
-	stdlib/stmp-def \
-	ctype/stmp-def \
-	stdio/stmp-def \
-	$(LIBC_STDIO64_DEF) \
-	string/stmp-def \
-	$(LIBC_SIGNAL_DEF) \
-	time/stmp-def \
-	locale/stmp-def \
-	reent/stmp-def \
-	$(LIBC_EXTRA_DEF) \
-	misc/stmp-def
-
-libc.info: sigset.texi extra.texi stdio64.texi targetdep.tex $(SUBDEFS)
-
-stmp-sigset: config.status
-	if test -n "$(LIBC_SIGNAL_LIB)"; then \
-	  echo "@set SIGNALS" >tmp.texi; \
-	else \
-	  echo "@clear SIGNALS" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi sigset.texi
-	touch $@
-
-sigset.texi: stmp-sigset ; @true
-
-stmp-extra: config.status
-	if test -n "$(LIBC_EXTRA_LIB)"; then \
-	  echo "@set EXTRA" >tmp.texi; \
-	else \
-	  echo "@clear EXTRA" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi extra.texi
-	touch $@
-
-extra.texi: stmp-extra ; @true
-
-stmp-stdio64: config.status
-	if test -n "$(LIBC_STDIO64_LIB)"; then \
-	  echo "@set STDIO64" >tmp.texi; \
-	else \
-	  echo "@clear STDIO64" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi stdio64.texi
-	touch $@
-
-stdio64.texi: stmp-stdio64 ; @true
-
-stmp-targetdep: force
-	rm -f tmp.texi
-	targetdoc=`pwd`/tmp.texi; \
-	for d in $(SUBDIRS); do \
-	  if test "$$d" != "."; then \
-	    (cd $$d && $(MAKE) TARGETDOC=$${targetdoc} doc) || exit 1; \
-	  fi; \
-	done
-	cat $(srcdir)/sys.tex >>tmp.texi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
-	touch $@
-
-targetdep.tex: stmp-targetdep ; @true
-
-$(SUBDEFS): stmp-targetdep ; @true
-
-.PHONY: force
-force:
-
-CLEANFILES = $(CRT0) \
-	sigset.texi stmp-sigset extra.texi stmp-extra \
-	stdio64.texi stmp-stdio64 tmp.texi targetdep.tex stmp-targetdep
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/Makefile.in b/newlib/libc/Makefile.in
deleted file mode 100644
index 53e726d21..000000000
--- a/newlib/libc/Makefile.in
+++ /dev/null
@@ -1,756 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-@HAVE_POSIX_DIR_TRUE@POSIX_SUBDIR = @HAVE_POSIX_DIR_TRUE@posix
-
-@HAVE_SIGNAL_DIR_TRUE@SIGNAL_SUBDIR = @HAVE_SIGNAL_DIR_TRUE@signal
-
-@HAVE_SYSCALL_DIR_TRUE@SYSCALLS_SUBDIR = @HAVE_SYSCALL_DIR_TRUE@syscalls
-
-@HAVE_UNIX_DIR_TRUE@UNIX_SUBDIR = @HAVE_UNIX_DIR_TRUE@unix
-
-@HAVE_STDIO64_DIR_TRUE@STDIO64_SUBDIR = @HAVE_STDIO64_DIR_TRUE@stdio64
-
-# The order of SUBDIRS is important for the integrated documentation.
-# Do not change the order without considering the doc impact.
-SUBDIRS = argz stdlib ctype search stdio $(STDIO64_SUBDIR) string $(SIGNAL_SUBDIR) time locale sys reent \
-	$(extra_dir) errno misc machine $(UNIX_SUBDIR) $(POSIX_SUBDIR) $(SYSCALLS_SUBDIR) .
-
-
-noinst_DATA = $(CRT0)
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libc.la
-@USE_LIBTOOL_TRUE@SUBLIBS = @USE_LIBTOOL_TRUE@\
-@USE_LIBTOOL_TRUE@	argz/libargz.$(aext) \
-@USE_LIBTOOL_TRUE@	stdlib/libstdlib.$(aext) \
-@USE_LIBTOOL_TRUE@	ctype/libctype.$(aext) \
-@USE_LIBTOOL_TRUE@	search/libsearch.$(aext) \
-@USE_LIBTOOL_TRUE@	stdio/libstdio.$(aext) \
-@USE_LIBTOOL_TRUE@	$(LIBC_STDIO64_LIB) \
-@USE_LIBTOOL_TRUE@	string/libstring.$(aext) \
-@USE_LIBTOOL_TRUE@	$(LIBC_SIGNAL_LIB) \
-@USE_LIBTOOL_TRUE@	time/libtime.$(aext) \
-@USE_LIBTOOL_TRUE@	locale/liblocale.$(aext) \
-@USE_LIBTOOL_TRUE@	$(LIBC_SYS_LIB) \
-@USE_LIBTOOL_TRUE@	reent/libreent.$(aext) \
-@USE_LIBTOOL_TRUE@	$(LIBC_EXTRA_LIB) \
-@USE_LIBTOOL_TRUE@	errno/liberrno.$(aext) \
-@USE_LIBTOOL_TRUE@	misc/libmisc.$(aext) \
-@USE_LIBTOOL_TRUE@	$(LIBC_MACHINE_LIB) \
-@USE_LIBTOOL_TRUE@	$(LIBC_UNIX_LIB) \
-@USE_LIBTOOL_TRUE@	$(LIBC_POSIX_LIB) \
-@USE_LIBTOOL_TRUE@	$(LIBC_SYSCALL_LIB)
-@USE_LIBTOOL_FALSE@SUBLIBS = @USE_LIBTOOL_FALSE@\
-@USE_LIBTOOL_FALSE@	argz/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	stdlib/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	ctype/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	search/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	stdio/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	$(LIBC_STDIO64_LIB) \
-@USE_LIBTOOL_FALSE@	string/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	$(LIBC_SIGNAL_LIB) \
-@USE_LIBTOOL_FALSE@	time/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	locale/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	$(LIBC_SYS_LIB) \
-@USE_LIBTOOL_FALSE@	reent/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	$(LIBC_EXTRA_LIB) \
-@USE_LIBTOOL_FALSE@	errno/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	misc/lib.$(aext) \
-@USE_LIBTOOL_FALSE@	$(LIBC_MACHINE_LIB) \
-@USE_LIBTOOL_FALSE@	$(LIBC_UNIX_LIB) \
-@USE_LIBTOOL_FALSE@	$(LIBC_POSIX_LIB) \
-@USE_LIBTOOL_FALSE@	$(LIBC_SYSCALL_LIB)
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@libc.a
-
-libc_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@libc_la_SOURCES = 
-@USE_LIBTOOL_TRUE@libc_la_LIBADD = @USE_LIBTOOL_TRUE@$(SUBLIBS)
-@USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(SUBLIBS)
-
-info_TEXINFOS = libc.texinfo
-
-# This is a list of the stmp-def files in each subdirectory which
-# builds .def files.  We don't list subdirectories which don't build
-# .def files; if the list of subdirectories changes, we must change
-# this as well.
-SUBDEFS = \
-	stdlib/stmp-def \
-	ctype/stmp-def \
-	stdio/stmp-def \
-	$(LIBC_STDIO64_DEF) \
-	string/stmp-def \
-	$(LIBC_SIGNAL_DEF) \
-	time/stmp-def \
-	locale/stmp-def \
-	reent/stmp-def \
-	$(LIBC_EXTRA_DEF) \
-	misc/stmp-def
-
-
-CLEANFILES = $(CRT0) \
-	sigset.texi stmp-sigset extra.texi stmp-extra \
-	stdio64.texi stmp-stdio64 tmp.texi targetdep.tex stmp-targetdep
-
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-libc_a_LIBADD = 
-libc_a_SOURCES = libc.a.c
-libc_a_OBJECTS =  libc.a.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libc_la_OBJECTS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
-TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
-INFO_DEPS = libc.info
-DVIS = libc.dvi
-TEXINFOS = libc.texinfo
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-DIST_SUBDIRS =  argz stdlib ctype search stdio stdio64 string signal \
-time locale sys reent @extra_dir@ errno misc machine unix posix \
-syscalls .
-SOURCES = libc.a.c $(libc_la_SOURCES)
-OBJECTS = libc.a.$(OBJEXT) $(libc_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .lo .o .obj .ps .s .texi .texinfo .txi
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../acinclude.m4 \
-		../aclocal.m4 ../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES)
-	$(LINK)  $(libc_la_LDFLAGS) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS)
-
-libc.info: libc.texinfo
-libc.dvi: libc.texinfo
-
-
-DVIPS = dvips
-
-.texi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.txi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
-	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f libc.aux libc.cp libc.cps libc.dvi libc.fn libc.fns libc.ky \
-	  libc.kys libc.ps libc.log libc.pg libc.toc libc.tp libc.tps \
-	  libc.vr libc.vrs libc.op libc.tr libc.cv libc.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-clean-info: mostlyclean-aminfo
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(DIST_SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-aminfo clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-aminfo distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-aminfo maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-@USE_LIBTOOL_FALSE@libc.a: $(SUBLIBS)
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-@USE_LIBTOOL_FALSE@	mkdir tmp
-@USE_LIBTOOL_FALSE@	cd tmp; \
-@USE_LIBTOOL_FALSE@	 for i in $(SUBLIBS); do \
-@USE_LIBTOOL_FALSE@	   $(AR) x ../$$i; \
-@USE_LIBTOOL_FALSE@	 done; \
-@USE_LIBTOOL_FALSE@	$(AR) $(AR_FLAGS) ../$@ *.o
-@USE_LIBTOOL_FALSE@	$(RANLIB) $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-
-$(SUBLIBS): ; @true
-
-crt0.o: sys/crt0.o
-	rm -f $@
-	ln sys/crt0.o $@ >/dev/null 2>/dev/null || cp sys/crt0.o $@
-
-sys/crt0.o: ; @true
-
-libc.info: sigset.texi extra.texi stdio64.texi targetdep.tex $(SUBDEFS)
-
-stmp-sigset: config.status
-	if test -n "$(LIBC_SIGNAL_LIB)"; then \
-	  echo "@set SIGNALS" >tmp.texi; \
-	else \
-	  echo "@clear SIGNALS" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi sigset.texi
-	touch $@
-
-sigset.texi: stmp-sigset ; @true
-
-stmp-extra: config.status
-	if test -n "$(LIBC_EXTRA_LIB)"; then \
-	  echo "@set EXTRA" >tmp.texi; \
-	else \
-	  echo "@clear EXTRA" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi extra.texi
-	touch $@
-
-extra.texi: stmp-extra ; @true
-
-stmp-stdio64: config.status
-	if test -n "$(LIBC_STDIO64_LIB)"; then \
-	  echo "@set STDIO64" >tmp.texi; \
-	else \
-	  echo "@clear STDIO64" >tmp.texi; \
-	fi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi stdio64.texi
-	touch $@
-
-stdio64.texi: stmp-stdio64 ; @true
-
-stmp-targetdep: force
-	rm -f tmp.texi
-	targetdoc=`pwd`/tmp.texi; \
-	for d in $(SUBDIRS); do \
-	  if test "$$d" != "."; then \
-	    (cd $$d && $(MAKE) TARGETDOC=$${targetdoc} doc) || exit 1; \
-	  fi; \
-	done
-	cat $(srcdir)/sys.tex >>tmp.texi
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
-	touch $@
-
-targetdep.tex: stmp-targetdep ; @true
-
-$(SUBDEFS): stmp-targetdep ; @true
-
-.PHONY: force
-force:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/aclocal.m4 b/newlib/libc/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/argz/Makefile.am b/newlib/libc/argz/Makefile.am
deleted file mode 100644
index bbc82fc8e..000000000
--- a/newlib/libc/argz/Makefile.am
+++ /dev/null
@@ -1,65 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-## All functions in this directory are EL/IX level 2 and above
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	argz_add.$(oext) \
-	argz_add_sep.$(oext) \
-	argz_append.$(oext) \
-	argz_count.$(oext) \
-	argz_create.$(oext) \
-	argz_create_sep.$(oext) \
-	argz_delete.$(oext) \
-	argz_extract.$(oext) \
-	argz_insert.$(oext) \
-	argz_next.$(oext) \
-	argz_replace.$(oext) \
-	argz_stringify.$(oext) \
-	buf_findstr.$(oext) \
-	envz_entry.$(oext) \
-	envz_get.$(oext) \
-	envz_add.$(oext) \
-	envz_remove.$(oext) \
-	envz_merge.$(oext) \
-	envz_strip.$(oext)
-endif
-
-libargz_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libargz.la
-libargz_la_SOURCES = dummy.c
-libargz_la_LIBADD = $(LIB_OBJS)
-libargz_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = dummy.c
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-SUFFIXES = .def
-
-CHEWOUT_FILES =
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-
-include $(srcdir)/../../Makefile.shared
diff --git a/newlib/libc/argz/Makefile.in b/newlib/libc/argz/Makefile.in
deleted file mode 100644
index 868a75482..000000000
--- a/newlib/libc/argz/Makefile.in
+++ /dev/null
@@ -1,407 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	argz_add.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_add_sep.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_append.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_count.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_create.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_create_sep.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_delete.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_extract.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_insert.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_next.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_replace.$(oext) \
-@ELIX_LEVEL_1_FALSE@	argz_stringify.$(oext) \
-@ELIX_LEVEL_1_FALSE@	buf_findstr.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_entry.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_get.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_add.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_remove.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_merge.$(oext) \
-@ELIX_LEVEL_1_FALSE@	envz_strip.$(oext)
-
-libargz_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libargz.la
-@USE_LIBTOOL_TRUE@libargz_la_SOURCES = @USE_LIBTOOL_TRUE@dummy.c
-@USE_LIBTOOL_TRUE@libargz_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libargz_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@dummy.c
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-SUFFIXES = .def
-
-CHEWOUT_FILES = 
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  dummy.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libargz_la_OBJECTS =  dummy.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libargz_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libargz_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus argz/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libargz.la: $(libargz_la_OBJECTS) $(libargz_la_DEPENDENCIES)
-	$(LINK)  $(libargz_la_LDFLAGS) $(libargz_la_OBJECTS) $(libargz_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = argz
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/argz/argz_add.c b/newlib/libc/argz/argz_add.c
deleted file mode 100644
index 46e71ca37..000000000
--- a/newlib/libc/argz/argz_add.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-error_t
-_DEFUN (argz_add, (argz, argz_len, str),
-       char **argz _AND
-       size_t *argz_len _AND
-       const char *str)
-{
-  int len_to_add = 0;
-  size_t last = *argz_len;
-
-  if (str == NULL)
-    return 0;
-
-  len_to_add = strlen(str) + 1;
-  *argz_len += len_to_add;
-
-  if(!(*argz = (char *)realloc(*argz, *argz_len)))
-    return ENOMEM;
-
-  memcpy(*argz + last, str, len_to_add);
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_add_sep.c b/newlib/libc/argz/argz_add_sep.c
deleted file mode 100644
index 5a56ec931..000000000
--- a/newlib/libc/argz/argz_add_sep.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <string.h>
-#include <argz.h>
-
-error_t
-_DEFUN (argz_add_sep, (argz, argz_len, str, sep),
-       char **argz _AND
-       size_t *argz_len _AND
-       const char *str _AND
-       int sep)
-{
-  char *str_argz = 0;
-  size_t str_argz_len = 0;
-  size_t last = *argz_len;
-
-  argz_create_sep (str, sep, &str_argz, &str_argz_len);
-
-  *argz_len += str_argz_len;
-
-  if(!(*argz = (char *)realloc(*argz, *argz_len)))
-    return ENOMEM;
-
-  memcpy(*argz + last, str_argz, str_argz_len);
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_append.c b/newlib/libc/argz/argz_append.c
deleted file mode 100644
index 7519e1608..000000000
--- a/newlib/libc/argz/argz_append.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-error_t
-_DEFUN (argz_append, (argz, argz_len, buf, buf_len),
-       char **argz _AND
-       size_t *argz_len _AND
-       const char *buf _AND
-       size_t buf_len)
-{
-  size_t last = *argz_len;
-
-  *argz_len += buf_len;
-
-  if(!(*argz = (char *)realloc(*argz, *argz_len)))
-    return ENOMEM;
-
-  memcpy(*argz + last, buf, buf_len);
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_count.c b/newlib/libc/argz/argz_count.c
deleted file mode 100644
index 0c8a816c1..000000000
--- a/newlib/libc/argz/argz_count.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-size_t
-_DEFUN (argz_count, (argz, argz_len), 
-       const char *argz _AND
-       size_t argz_len)
-{
-  int i;
-  size_t count = 0;
-
-  for (i = 0; i < argz_len; i++)
-    {
-      if (argz[i] == '\0')
-        count++;
-    }
-  return count;
-}
diff --git a/newlib/libc/argz/argz_create.c b/newlib/libc/argz/argz_create.c
deleted file mode 100644
index f5651c618..000000000
--- a/newlib/libc/argz/argz_create.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-error_t
-_DEFUN (argz_create, (argv, argz, argz_len),
-       char *const argv[] _AND
-       char **argz _AND
-       size_t *argz_len)
-{
-  int argc = 0;
-  int i = 0;
-  int len = 0;
-  char *iter;
-
-  *argz_len = 0;
-
-  if (*argv == NULL)
-    {
-      *argz = NULL;
-      return 0;
-    }
-
-  while (argv[argc])
-    {
-      *argz_len += (strlen(argv[argc]) + 1);
-      argc++;
-    }
-
-  /* There are argc strings to copy into argz. */
-  if(!(*argz = (char *)malloc(*argz_len)))
-    return ENOMEM;
-
-  iter = *argz;
-  for(i = 0; i < argc; i++)
-    {
-      len = strlen(argv[i]) + 1;
-      memcpy(iter, argv[i], len);
-      iter += len;
-    }
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_create_sep.c b/newlib/libc/argz/argz_create_sep.c
deleted file mode 100644
index bf0670bda..000000000
--- a/newlib/libc/argz/argz_create_sep.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-error_t
-_DEFUN (argz_create_sep, (string, sep, argz, argz_len),
-       const char *string _AND
-       int sep _AND
-       char **argz _AND
-       size_t *argz_len)
-{
-  int len = 0;
-  int i = 0;
-  int num_strings = 0;
-  char delim[2];
-  char *running = 0;
-  char *old_running = 0;
-  char *token = 0;
-  char *iter = 0;
-
-  delim[0] = sep;
-  delim[1] = '\0';
-
-  running = strdup(string);
-  old_running = running;
-
-  while ((token = strsep(&running, delim)))
-    {
-      len = strlen(token);
-      *argz_len += (len + 1);
-      num_strings++;
-    }
-
-  if(!(*argz = (char *)malloc(*argz_len)))
-    return ENOMEM;
-
-  free(old_running);
-
-  running = strdup(string);
-  old_running = running;
-
-  iter = *argz;
-  for (i = 0; i < num_strings; i++)
-    {
-      token = strsep(&running, delim);
-      len = strlen(token) + 1;
-      memcpy(iter, token, len);
-      iter += len;
-    }
-
-  free(old_running);
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_delete.c b/newlib/libc/argz/argz_delete.c
deleted file mode 100644
index 237128c88..000000000
--- a/newlib/libc/argz/argz_delete.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-error_t
-_DEFUN (argz_delete, (argz, argz_len, entry),
-       char **argz _AND
-       size_t *argz_len _AND
-       char *entry)
-{
-  int len = 0;
-  char *moveto = entry;
-
-  if (entry)
-    {
-      len = strlen(entry) + 1;
-      entry += len;
-      
-      memmove(moveto, entry, *argz + *argz_len - entry);
-
-      *argz_len -= len;
-
-      if(!(*argz = (char *)realloc(*argz, *argz_len)))
-        return ENOMEM;
-
-      if (*argz_len <= 0)
-        {
-          free(*argz);
-          *argz = NULL;
-        }
-    }
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_extract.c b/newlib/libc/argz/argz_extract.c
deleted file mode 100644
index 289c6e100..000000000
--- a/newlib/libc/argz/argz_extract.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <argz.h>
-#include <sys/types.h>
-
-void
-_DEFUN (argz_extract, (argz, argz_len, argv),
-       char *argz _AND
-       size_t argz_len _AND
-       char **argv)
-{
-  size_t i = 0;
-  int j = 0;
-  const size_t count = argz_count(argz, argz_len);
-
-  for (i = argz_len - 2; i > 0; i--)
-    {
-      if (argz[i] == '\0')
-        {
-          j++;
-          argv[count - j] = &argz[i + 1];
-        }
-    }
-  argv[0] = &argz[0];
-  argv[count] = NULL;
-}
diff --git a/newlib/libc/argz/argz_insert.c b/newlib/libc/argz/argz_insert.c
deleted file mode 100644
index 043a10193..000000000
--- a/newlib/libc/argz/argz_insert.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-
-error_t
-_DEFUN (argz_insert, (argz, argz_len, before, entry),
-       char **argz _AND
-       size_t *argz_len _AND
-       char *before _AND
-       const char *entry)
-{
-  int len = 0;
-
-  if (before == NULL)
-    argz_add(argz, argz_len, entry);
-
-  if (before < *argz || before >= *argz + *argz_len)
-    return EINVAL;
-
-  while (before != *argz && before[-1])
-    before--;
-
-  len = strlen(entry) + 1;
-
-  if(!(*argz = (char *)realloc(*argz, *argz_len + len)))
-    return ENOMEM;
-  
-  memmove(before + len, before, *argz + *argz_len - before);
-  memcpy(before, entry, len);
-
-  *argz_len += len;
-
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_next.c b/newlib/libc/argz/argz_next.c
deleted file mode 100644
index e9dbe0694..000000000
--- a/newlib/libc/argz/argz_next.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-char *
-_DEFUN (argz_next, (argz, argz_len, entry),
-       char *argz _AND
-       size_t argz_len _AND
-       const char *entry)
-{
-  if (entry)
-    {
-      while(*entry != '\0')
-        entry++;
-      entry++;
-
-      if (entry >= argz + argz_len)
-        return NULL;
-      else
-        return (char *) entry;
-    }
-  else
-    {
-      if (argz_len > 0)
-        return (char *) argz;
-      else
-        return NULL;
-    }
-}
diff --git a/newlib/libc/argz/argz_replace.c b/newlib/libc/argz/argz_replace.c
deleted file mode 100644
index cb01eaef5..000000000
--- a/newlib/libc/argz/argz_replace.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-
-#include "buf_findstr.h"
-
-error_t
-_DEFUN (argz_replace, (argz, argz_len, str, with, replace_count),
-       char **argz _AND
-       size_t *argz_len _AND
-       const char *str _AND
-       const char *with _AND
-       unsigned *replace_count)
-{
-  const int str_len = strlen(str);
-  const int with_len = strlen(with);
-  const int len_diff = with_len - str_len;
-
-  char *buf_iter = *argz;
-  size_t buf_len = *argz_len;
-  char *last_iter = NULL;
-  char *new_argz = NULL;
-  size_t new_argz_len = 0;
-  char *new_argz_iter = NULL;
-
-  *replace_count = 0;
-  new_argz_len = *argz_len;
-
-  while(buf_len)
-    {
-      if(_buf_findstr(str, &buf_iter, &buf_len))
-        {
-          *replace_count += 1;
-          new_argz_len += len_diff;
-        }
-    }
-
-  if (*replace_count)
-    {
-      new_argz = (char *)malloc(new_argz_len);
-      
-      buf_iter = *argz;
-      buf_len = *argz_len;
-      last_iter = buf_iter;
-      new_argz_iter = new_argz;
-      
-      while(buf_len)
-        {
-          if (_buf_findstr(str, &buf_iter, &buf_len))
-            {
-              /* copy everything up to, but not including str, from old argz to
-                 new argz. */
-              memcpy(new_argz_iter, last_iter, buf_iter - last_iter - str_len);
-              new_argz_iter += (buf_iter - last_iter - str_len);
-              /* copy replacement string. */
-              memcpy(new_argz_iter, with, with_len);
-              new_argz_iter += with_len;
-              last_iter = buf_iter;
-            }
-        }
-      /* copy everything after last occurrence of str. */
-      memcpy(new_argz_iter, last_iter, *argz + *argz_len - last_iter);
-
-      /* reallocate argz, and copy over the new value. */
-      if(!(*argz = (char *)realloc(*argz, new_argz_len)))
-        return ENOMEM;
-
-      memcpy(*argz, new_argz, new_argz_len);
-      *argz_len = new_argz_len;
-
-      if (*argz_len == 0)
-        {
-          free(*argz);
-          *argz = NULL;
-        }
-      free(new_argz);
-    }
-
-  return 0;
-}
diff --git a/newlib/libc/argz/argz_stringify.c b/newlib/libc/argz/argz_stringify.c
deleted file mode 100644
index 6ff5dd001..000000000
--- a/newlib/libc/argz/argz_stringify.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-void
-_DEFUN (argz_stringify, (argz, argz_len, sep),
-       char *argz _AND
-       size_t argz_len _AND
-       int sep)
-{
-  size_t i;
-
-  /* len includes trailing \0, which we don't want to replace. */
-  for (i = 0; i < argz_len - 1; i++)
-    {
-      if (argz[i] == '\0')
-        argz[i] = sep;
-    }
-}
diff --git a/newlib/libc/argz/buf_findstr.c b/newlib/libc/argz/buf_findstr.c
deleted file mode 100644
index aeb32a943..000000000
--- a/newlib/libc/argz/buf_findstr.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "buf_findstr.h"
-
-/* Find string str in buffer buf of length buf_len.  Point buf to character after string,
-   or set it to NULL if end of buffer is reached.  Return 1 if found, 0 if not. */
-int
-_buf_findstr(const char *str, char **buf, size_t *buf_len)
-{
-  int i = 0;
-  int j = 0;
-
-  for (i = 0; i < *buf_len; i++)
-    {
-      if (str[0] == (*buf)[i])
-        {
-          j = i;
-          while (str[j - i] && (str[j - i] == (*buf)[j])) j++;
-          if(str[j - i] == '\0')
-            {
-              *buf += j;
-              *buf_len -= j;
-              return 1;
-            }
-        }
-    }
-
-  if (i == *buf_len)
-    {
-      *buf += *buf_len;
-      *buf_len = 0;
-    }
-
-  return 0;
-}
diff --git a/newlib/libc/argz/buf_findstr.h b/newlib/libc/argz/buf_findstr.h
deleted file mode 100644
index d6cef7c15..000000000
--- a/newlib/libc/argz/buf_findstr.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <sys/types.h>
-
-/* Find string str in buffer buf of length buf_len.  Point buf to
-   character after string, or set it to NULL if end of buffer is
-   reached.  Return 1 if found, 0 if not. */
-int _buf_findstr(const char *str, char **buf, size_t *buf_len);
diff --git a/newlib/libc/argz/dummy.c b/newlib/libc/argz/dummy.c
deleted file mode 100644
index 895395e51..000000000
--- a/newlib/libc/argz/dummy.c
+++ /dev/null
@@ -1 +0,0 @@
-/* empty stub to allow objectlist.awk.in to be created */
diff --git a/newlib/libc/argz/envz_add.c b/newlib/libc/argz/envz_add.c
deleted file mode 100644
index 3e91a5867..000000000
--- a/newlib/libc/argz/envz_add.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-#include <envz.h>
-
-error_t
-_DEFUN (envz_add, (envz, envz_len, name, value),
-       char **envz _AND 
-       size_t *envz_len _AND 
-       const char *name _AND
-       const char *value)
-{
-  char *concat = NULL;
-  int name_len = 0;
-  int val_len = 0;
-  int retval = 0;
-
-  envz_remove(envz, envz_len, name);
-
-  if (value)
-    {
-      name_len = strlen(name);
-      val_len = strlen(value);
-      if(!(concat = (char *) malloc(name_len + val_len + 2)))
-        return ENOMEM;
-
-      memcpy(concat, name, name_len);
-      concat[name_len] = '=';
-      memcpy(concat + name_len + 1, value, val_len + 1);
-
-      retval = argz_add(envz, envz_len, concat);
-      free(concat);
-    }
-  else
-    {
-      retval = argz_add(envz, envz_len, name);
-    }
-  return retval;
-}
diff --git a/newlib/libc/argz/envz_entry.c b/newlib/libc/argz/envz_entry.c
deleted file mode 100644
index 3d1986ba7..000000000
--- a/newlib/libc/argz/envz_entry.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <envz.h>
-
-#include "buf_findstr.h"
-
-char *
-_DEFUN (envz_entry, (envz, envz_len, name),
-       const char *envz _AND
-       size_t envz_len _AND
-       const char *name)
-{
-  char *buf_ptr = (char *)envz;
-  size_t buf_len = envz_len;
-
-  while(buf_len)
-    {
-      if (_buf_findstr(name, &buf_ptr, &buf_len))
-        {
-          if (buf_ptr)
-            {
-              if (*buf_ptr == '=' || *buf_ptr == '\0')
-                {
-                  buf_ptr--;
-
-                  /* Move buf_ptr back to start of entry. */
-                  while(*buf_ptr != '\0' && buf_ptr != envz) buf_ptr--;
-                  
-                  if(*buf_ptr == '\0')
-                    buf_ptr++;
-
-                  return (char *)buf_ptr;
-                }
-            }
-        }
-    }
-  return 0;
-}
diff --git a/newlib/libc/argz/envz_get.c b/newlib/libc/argz/envz_get.c
deleted file mode 100644
index b4f7c2806..000000000
--- a/newlib/libc/argz/envz_get.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <envz.h>
-
-#include "buf_findstr.h"
-
-char *
-_DEFUN (envz_get, (envz, envz_len, name),
-       const char *envz _AND 
-       size_t envz_len _AND
-       const char *name)
-{
-  char *buf_ptr = (char *)envz;
-  size_t buf_len = envz_len;
-
-  while(buf_len)
-    {
-      if (_buf_findstr(name, &buf_ptr, &buf_len))
-        {
-          if (*buf_ptr == '=')
-            {
-              buf_ptr++;
-              return (char *)buf_ptr;
-            }
-          else
-            {
-              if (*buf_ptr == '\0')
-                /* NULL entry. */
-                return NULL;
-            }
-        }
-    }
-  /* No matching entries found. */
-  return NULL;
-}
diff --git a/newlib/libc/argz/envz_merge.c b/newlib/libc/argz/envz_merge.c
deleted file mode 100644
index 46832202e..000000000
--- a/newlib/libc/argz/envz_merge.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-#include <envz.h>
-
-error_t
-_DEFUN (envz_merge, (envz, envz_len, envz2, envz2_len, override),
-       char **envz _AND
-       size_t *envz_len _AND
-       const char *envz2 _AND
-       size_t envz2_len _AND
-       int override)
-{
-  char *entry = NULL;
-  char *name_str = NULL;
-  char *val_str = NULL;
-  char *name_iter = NULL;
-  int retval = 0;
-
-  while((entry = argz_next((char *)envz2, envz2_len, entry)) && !retval)
-    {
-      if (!override)
-        {
-          name_str = strdup (entry);
-          name_iter = strchr(name_str, '=');
-          if(name_iter)
-            *name_iter = '\0';
-
-          if(!envz_entry(*envz, *envz_len, name_str))
-            {
-              retval = argz_add(envz, envz_len, entry);
-            }
-          free(name_str);
-        }
-      else
-        {
-          name_str = strdup (entry);
-          name_iter = strchr(name_str, '=');
-          if(name_iter)
-            {
-              *name_iter = '\0';
-              val_str = name_iter + 1;
-            }
-          else
-            {
-              val_str = NULL;
-            }
-
-          retval = envz_add(envz, envz_len, name_str, val_str);
-        }
-    }
-  return retval;
-}
diff --git a/newlib/libc/argz/envz_remove.c b/newlib/libc/argz/envz_remove.c
deleted file mode 100644
index 1882297f0..000000000
--- a/newlib/libc/argz/envz_remove.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-#include <envz.h>
-
-void
-_DEFUN (envz_remove, (envz, envz_len, name),
-       char **envz _AND
-       size_t *envz_len _AND
-       const char *name)
-{
-  char *entry = NULL;
-  int len = 0;
-  entry = envz_entry (*envz, *envz_len, name);
-
-  if (entry)
-    {
-      len = strlen(entry) + 1;
-
-      /* Not the last entry. */
-      if (*envz + *envz_len != entry + len - 1)
-        {
-          memmove(entry, entry + len, *envz + *envz_len - entry - len);
-        }
-
-      *envz = (char *)realloc(*envz, *envz_len - len);
-      *envz_len -= len;
-    }
-}
diff --git a/newlib/libc/argz/envz_strip.c b/newlib/libc/argz/envz_strip.c
deleted file mode 100644
index e1c461091..000000000
--- a/newlib/libc/argz/envz_strip.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <argz.h>
-#include <envz.h>
-
-void
-_DEFUN (envz_strip, (envz, envz_len),
-       char **envz _AND
-       size_t *envz_len)
-{
-  char *entry = 0;
-  int len = 0;
-  int null_found = 0;
-
-  while((entry = argz_next(*envz, *envz_len, entry)))
-    {
-      if(!strchr(entry, '='))
-        {
-          null_found = 1;
-          len = strlen(entry) + 1;
-          /* Make sure this is not the last entry in envz. If it is, it
-           will be chopped off by the realloc anyway.*/
-          if(*envz + *envz_len != entry + len - 1)
-            {
-              memmove(entry, entry + len, *envz + *envz_len - entry - len);
-            }
-          *envz_len -= len;
-        }
-    }
-  if(null_found)
-    {
-      *envz = (char *)realloc(*envz, *envz_len);
-    }
-}
diff --git a/newlib/libc/configure b/newlib/libc/configure
deleted file mode 100755
index e1ba59f89..000000000
--- a/newlib/libc/configure
+++ /dev/null
@@ -1,3593 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-newlib-io-pos-args enable printf-family positional arg support"
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=sys.tex
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Check whether --enable-newlib-io-pos-args or --disable-newlib-io-pos-args was given.
-if test "${enable_newlib_io_pos_args+set}" = set; then
-  enableval="$enable_newlib_io_pos_args"
-  case "${enableval}" in
-  yes) newlib_io_pos_args=yes ;;
-  no)  newlib_io_pos_args=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-pos-args option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_pos_args=no
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:614: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:667: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:724: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:757: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 762 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:790: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 795 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:802: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}.."
-  fi
-else
-  newlib_basedir="${srcdir}/.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:970: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:991: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1009: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1052: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1078: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1091: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1104: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1129: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1159: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1208: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1232: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1263: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1295: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1327: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1359: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1404: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1458: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1492: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1678: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1759: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1791: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1802 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1838: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1866: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1909: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1939: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1942: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1977: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1994: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:2006: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2044: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2065: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2238: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2244: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2268: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2330: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2401: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2433: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2468: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2500: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2567 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2605: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2618 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2655: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2687: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2722: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2754: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2789: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2821: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2857: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2862 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2891: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2896 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-subdirs="machine sys"
-
-
-CRT0=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-fi
-
-
-
-LIBC_POSIX_LIB=
-if test -n "${posix_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_POSIX_LIB=${posix_dir}/lib${posix_dir}.${aext}
-  else
-    LIBC_POSIX_LIB=${posix_dir}/lib.${aext}
-  fi
-fi
-
-
-
-if test x${posix_dir} != x; then
-  HAVE_POSIX_DIR_TRUE=
-  HAVE_POSIX_DIR_FALSE='#'
-else
-  HAVE_POSIX_DIR_TRUE='#'
-  HAVE_POSIX_DIR_FALSE=
-fi
-
-LIBC_SIGNAL_LIB=
-LIBC_SIGNAL_DEF=
-if test -n "${signal_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SIGNAL_LIB=${signal_dir}/lib${signal_dir}.${aext}
-  else
-    LIBC_SIGNAL_LIB=${signal_dir}/lib.${aext}
-  fi
-  LIBC_SIGNAL_DEF=${signal_dir}/stmp-def
-fi
-
-
-
-
-if test x${signal_dir} != x; then
-  HAVE_SIGNAL_DIR_TRUE=
-  HAVE_SIGNAL_DIR_FALSE='#'
-else
-  HAVE_SIGNAL_DIR_TRUE='#'
-  HAVE_SIGNAL_DIR_FALSE=
-fi
-
-LIBC_STDIO64_LIB=
-LIBC_STDIO64_DEF=
-if test -n "${stdio64_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_STDIO64_LIB=${stdio64_dir}/lib${stdio64_dir}.${aext}
-  else
-    LIBC_STDIO64_LIB=${stdio64_dir}/lib.${aext}
-  fi
-  LIBC_STDIO64_DEF=${stdio64_dir}/stmp-def
-fi
-
-
-
-
-if test x${stdio64_dir} != x; then
-  HAVE_STDIO64_DIR_TRUE=
-  HAVE_STDIO64_DIR_FALSE='#'
-else
-  HAVE_STDIO64_DIR_TRUE='#'
-  HAVE_STDIO64_DIR_FALSE=
-fi
-
-LIBC_SYSCALL_LIB=
-if test -n "${syscall_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SYSCALL_LIB=${syscall_dir}/lib${syscall_dir}.${aext}
-  else
-    LIBC_SYSCALL_LIB=${syscall_dir}/lib.${aext}
-  fi
-fi
-
-
-
-if test x${syscall_dir} != x; then
-  HAVE_SYSCALL_DIR_TRUE=
-  HAVE_SYSCALL_DIR_FALSE='#'
-else
-  HAVE_SYSCALL_DIR_TRUE='#'
-  HAVE_SYSCALL_DIR_FALSE=
-fi
-
-LIBC_UNIX_LIB=
-if test -n "${unix_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_UNIX_LIB=${unix_dir}/lib${unix_dir}.${aext}
-  else
-    LIBC_UNIX_LIB=${unix_dir}/lib.${aext}
-  fi
-fi
-
-
-
-if test x${unix_dir} != x; then
-  HAVE_UNIX_DIR_TRUE=
-  HAVE_UNIX_DIR_FALSE='#'
-else
-  HAVE_UNIX_DIR_TRUE='#'
-  HAVE_UNIX_DIR_FALSE=
-fi
-
-LIBC_EXTRA_LIB=
-LIBC_EXTRA_DEF=
-extra_dir=
-
-
-
-
-
-
-LIBC_SYS_LIB=
-if test -n "${sys_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SYS_LIB=sys/${sys_dir}/lib${sys_dir}.${aext}
-  else
-    LIBC_SYS_LIB=sys/lib.${aext}
-  fi
-fi
-
-
-
-LIBC_MACHINE_LIB=
-if test -n "${machine_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_MACHINE_LIB=machine/${machine_dir}/lib${machine_dir}.${aext}
-  else
-    LIBC_MACHINE_LIB=machine/lib.${aext}
-  fi
-fi
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@CRT0@%$CRT0%g
-s%@LIBC_POSIX_LIB@%$LIBC_POSIX_LIB%g
-s%@HAVE_POSIX_DIR_TRUE@%$HAVE_POSIX_DIR_TRUE%g
-s%@HAVE_POSIX_DIR_FALSE@%$HAVE_POSIX_DIR_FALSE%g
-s%@LIBC_SIGNAL_LIB@%$LIBC_SIGNAL_LIB%g
-s%@LIBC_SIGNAL_DEF@%$LIBC_SIGNAL_DEF%g
-s%@HAVE_SIGNAL_DIR_TRUE@%$HAVE_SIGNAL_DIR_TRUE%g
-s%@HAVE_SIGNAL_DIR_FALSE@%$HAVE_SIGNAL_DIR_FALSE%g
-s%@LIBC_STDIO64_LIB@%$LIBC_STDIO64_LIB%g
-s%@LIBC_STDIO64_DEF@%$LIBC_STDIO64_DEF%g
-s%@HAVE_STDIO64_DIR_TRUE@%$HAVE_STDIO64_DIR_TRUE%g
-s%@HAVE_STDIO64_DIR_FALSE@%$HAVE_STDIO64_DIR_FALSE%g
-s%@LIBC_SYSCALL_LIB@%$LIBC_SYSCALL_LIB%g
-s%@HAVE_SYSCALL_DIR_TRUE@%$HAVE_SYSCALL_DIR_TRUE%g
-s%@HAVE_SYSCALL_DIR_FALSE@%$HAVE_SYSCALL_DIR_FALSE%g
-s%@LIBC_UNIX_LIB@%$LIBC_UNIX_LIB%g
-s%@HAVE_UNIX_DIR_TRUE@%$HAVE_UNIX_DIR_TRUE%g
-s%@HAVE_UNIX_DIR_FALSE@%$HAVE_UNIX_DIR_FALSE%g
-s%@LIBC_EXTRA_LIB@%$LIBC_EXTRA_LIB%g
-s%@LIBC_EXTRA_DEF@%$LIBC_EXTRA_DEF%g
-s%@extra_dir@%$extra_dir%g
-s%@LIBC_SYS_LIB@%$LIBC_SYS_LIB%g
-s%@LIBC_MACHINE_LIB@%$LIBC_MACHINE_LIB%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in machine sys; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/configure.in b/newlib/libc/configure.in
deleted file mode 100644
index 93b86132c..000000000
--- a/newlib/libc/configure.in
+++ /dev/null
@@ -1,136 +0,0 @@
-dnl This is the newlib/libc configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(sys.tex)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../..)
-
-dnl Support --enable-newlib-io-pos-args used by libc/stdio
-AC_ARG_ENABLE(newlib-io-pos-args,
-[  --enable-newlib-io-pos-args enable printf-family positional arg support],
-[case "${enableval}" in
-  yes) newlib_io_pos_args=yes ;;
-  no)  newlib_io_pos_args=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-pos-args option) ;;
- esac], [newlib_io_pos_args=no])dnl
-
-NEWLIB_CONFIGURE(..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-AC_CONFIG_SUBDIRS(machine sys)
-
-CRT0=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-fi
-AC_SUBST(CRT0)
-
-dnl For each directory which we may or may not want, we define a name
-dnl for the library and an automake conditional for whether we should
-dnl build the library.
-
-LIBC_POSIX_LIB=
-if test -n "${posix_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_POSIX_LIB=${posix_dir}/lib${posix_dir}.${aext}
-  else
-    LIBC_POSIX_LIB=${posix_dir}/lib.${aext}
-  fi
-fi
-AC_SUBST(LIBC_POSIX_LIB)
-AM_CONDITIONAL(HAVE_POSIX_DIR, test x${posix_dir} != x)
-
-LIBC_SIGNAL_LIB=
-LIBC_SIGNAL_DEF=
-if test -n "${signal_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SIGNAL_LIB=${signal_dir}/lib${signal_dir}.${aext}
-  else
-    LIBC_SIGNAL_LIB=${signal_dir}/lib.${aext}
-  fi
-  LIBC_SIGNAL_DEF=${signal_dir}/stmp-def
-fi
-AC_SUBST(LIBC_SIGNAL_LIB)
-AC_SUBST(LIBC_SIGNAL_DEF)
-AM_CONDITIONAL(HAVE_SIGNAL_DIR, test x${signal_dir} != x)
-
-LIBC_STDIO64_LIB=
-LIBC_STDIO64_DEF=
-if test -n "${stdio64_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_STDIO64_LIB=${stdio64_dir}/lib${stdio64_dir}.${aext}
-  else
-    LIBC_STDIO64_LIB=${stdio64_dir}/lib.${aext}
-  fi
-  LIBC_STDIO64_DEF=${stdio64_dir}/stmp-def
-fi
-AC_SUBST(LIBC_STDIO64_LIB)
-AC_SUBST(LIBC_STDIO64_DEF)
-AM_CONDITIONAL(HAVE_STDIO64_DIR, test x${stdio64_dir} != x)
-
-LIBC_SYSCALL_LIB=
-if test -n "${syscall_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SYSCALL_LIB=${syscall_dir}/lib${syscall_dir}.${aext}
-  else
-    LIBC_SYSCALL_LIB=${syscall_dir}/lib.${aext}
-  fi
-fi
-AC_SUBST(LIBC_SYSCALL_LIB)
-AM_CONDITIONAL(HAVE_SYSCALL_DIR, test x${syscall_dir} != x)
-
-LIBC_UNIX_LIB=
-if test -n "${unix_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_UNIX_LIB=${unix_dir}/lib${unix_dir}.${aext}
-  else
-    LIBC_UNIX_LIB=${unix_dir}/lib.${aext}
-  fi
-fi
-AC_SUBST(LIBC_UNIX_LIB)
-AM_CONDITIONAL(HAVE_UNIX_DIR, test x${unix_dir} != x)
-
-LIBC_EXTRA_LIB=
-LIBC_EXTRA_DEF=
-extra_dir=
-
-AC_SUBST(LIBC_EXTRA_LIB)
-AC_SUBST(LIBC_EXTRA_DEF)
-AC_SUBST(extra_dir)
-
-dnl We always recur into sys and machine, and let them decide what to
-dnl do.  However, we do need to know whether they will produce a library.
-
-LIBC_SYS_LIB=
-if test -n "${sys_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_SYS_LIB=sys/${sys_dir}/lib${sys_dir}.${aext}
-  else
-    LIBC_SYS_LIB=sys/lib.${aext}
-  fi
-fi
-AC_SUBST(LIBC_SYS_LIB)
-AC_SUBST(sys_dir)
-
-LIBC_MACHINE_LIB=
-if test -n "${machine_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LIBC_MACHINE_LIB=machine/${machine_dir}/lib${machine_dir}.${aext}
-  else
-    LIBC_MACHINE_LIB=machine/lib.${aext}
-  fi
-fi
-AC_SUBST(LIBC_MACHINE_LIB)
-AC_SUBST(machine_dir)
-
-AC_OUTPUT(Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile)
diff --git a/newlib/libc/ctype/Makefile.am b/newlib/libc/ctype/Makefile.am
deleted file mode 100644
index 4a85b7210..000000000
--- a/newlib/libc/ctype/Makefile.am
+++ /dev/null
@@ -1,118 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	ctype_.c \
-	isalnum.c \
-	isalpha.c \
-	iscntrl.c \
-	isdigit.c \
-	islower.c \
-	isupper.c \
-	isprint.c \
-	ispunct.c \
-	isspace.c \
-	isxdigit.c \
-	tolower.c \
-	toupper.c
-
-## The following handles EL/IX level 2 functions
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	isascii.$(oext) \
-	isblank.$(oext) \
-	iswalnum.$(oext) \
-	iswalpha.$(oext) \
-	iswblank.$(oext) \
-	iswcntrl.$(oext) \
-	iswctype.$(oext) \
-	iswdigit.$(oext) \
-	iswgraph.$(oext) \
-	iswlower.$(oext) \
-	iswprint.$(oext) \
-	iswpunct.$(oext) \
-	iswspace.$(oext) \
-	iswupper.$(oext) \
-	iswxdigit.$(oext) \
-	jp2uc.$(oext) \
-	toascii.$(oext) \
-	_tolower.$(oext) \
-	_toupper.$(oext) \
-	towctrans.$(oext) \
-	towlower.$(oext) \
-	towupper.$(oext) \
-	wctrans.$(oext)	\
-	wctype.$(oext)
-endif
-
-libctype_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libctype.la
-libctype_la_SOURCES = $(GENERAL_SOURCES)
-libctype_la_LIBADD = $(LIB_OBJS)
-libctype_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES= \
-	isalnum.def	\
-	isalpha.def	\
-	isascii.def	\
-	iscntrl.def	\
-	isdigit.def	\
-	islower.def	\
-	isprint.def	\
-	ispunct.def	\
-	isspace.def	\
-	isupper.def	\
-	iswalnum.def	\
-	iswalpha.def	\
-	iswblank.def 	\
-	iswcntrl.def 	\
-	iswctype.def 	\
-	iswdigit.def 	\
-	iswgraph.def 	\
-	iswlower.def 	\
-	iswprint.def 	\
-	iswpunct.def 	\
-	iswspace.def 	\
-	iswupper.def 	\
-	iswxdigit.def 	\
-	isxdigit.def	\
-	toascii.def	\
-	tolower.def	\
-	toupper.def	\
-	towctrans.def	\
-	towlower.def	\
-	towupper.def	\
-	wctrans.def	\
-	wctype.def	
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/ctype.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/ctype/Makefile.in b/newlib/libc/ctype/Makefile.in
deleted file mode 100644
index 0104df381..000000000
--- a/newlib/libc/ctype/Makefile.in
+++ /dev/null
@@ -1,471 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	ctype_.c \
-	isalnum.c \
-	isalpha.c \
-	iscntrl.c \
-	isdigit.c \
-	islower.c \
-	isupper.c \
-	isprint.c \
-	ispunct.c \
-	isspace.c \
-	isxdigit.c \
-	tolower.c \
-	toupper.c
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	isascii.$(oext) \
-@ELIX_LEVEL_1_FALSE@	isblank.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswalnum.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswalpha.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswblank.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswcntrl.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswctype.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswdigit.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswgraph.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswlower.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswprint.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswpunct.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswspace.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswupper.$(oext) \
-@ELIX_LEVEL_1_FALSE@	iswxdigit.$(oext) \
-@ELIX_LEVEL_1_FALSE@	jp2uc.$(oext) \
-@ELIX_LEVEL_1_FALSE@	toascii.$(oext) \
-@ELIX_LEVEL_1_FALSE@	_tolower.$(oext) \
-@ELIX_LEVEL_1_FALSE@	_toupper.$(oext) \
-@ELIX_LEVEL_1_FALSE@	towctrans.$(oext) \
-@ELIX_LEVEL_1_FALSE@	towlower.$(oext) \
-@ELIX_LEVEL_1_FALSE@	towupper.$(oext) \
-@ELIX_LEVEL_1_FALSE@	wctrans.$(oext)	\
-@ELIX_LEVEL_1_FALSE@	wctype.$(oext)
-
-libctype_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libctype.la
-@USE_LIBTOOL_TRUE@libctype_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libctype_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libctype_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = \
-	isalnum.def	\
-	isalpha.def	\
-	isascii.def	\
-	iscntrl.def	\
-	isdigit.def	\
-	islower.def	\
-	isprint.def	\
-	ispunct.def	\
-	isspace.def	\
-	isupper.def	\
-	iswalnum.def	\
-	iswalpha.def	\
-	iswblank.def 	\
-	iswcntrl.def 	\
-	iswctype.def 	\
-	iswdigit.def 	\
-	iswgraph.def 	\
-	iswlower.def 	\
-	iswprint.def 	\
-	iswpunct.def 	\
-	iswspace.def 	\
-	iswupper.def 	\
-	iswxdigit.def 	\
-	isxdigit.def	\
-	toascii.def	\
-	tolower.def	\
-	toupper.def	\
-	towctrans.def	\
-	towlower.def	\
-	towupper.def	\
-	wctrans.def	\
-	wctype.def	
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  ctype_.$(OBJEXT) isalnum.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@isalpha.$(OBJEXT) iscntrl.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@isdigit.$(OBJEXT) islower.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@isupper.$(OBJEXT) isprint.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ispunct.$(OBJEXT) isspace.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@isxdigit.$(OBJEXT) tolower.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@toupper.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libctype_la_OBJECTS =  ctype_.lo isalnum.lo isalpha.lo \
-@USE_LIBTOOL_TRUE@iscntrl.lo isdigit.lo islower.lo isupper.lo \
-@USE_LIBTOOL_TRUE@isprint.lo ispunct.lo isspace.lo isxdigit.lo \
-@USE_LIBTOOL_TRUE@tolower.lo toupper.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libctype_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libctype_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus ctype/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libctype.la: $(libctype_la_OBJECTS) $(libctype_la_DEPENDENCIES)
-	$(LINK)  $(libctype_la_LDFLAGS) $(libctype_la_OBJECTS) $(libctype_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = ctype
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/ctype.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/ctype/_tolower.c b/newlib/libc/ctype/_tolower.c
deleted file mode 100644
index 968dcf738..000000000
--- a/newlib/libc/ctype/_tolower.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef _tolower
-int
-_DEFUN(_tolower,(c),int c)
-{
-	return isupper(c) ? (c) - 'A' + 'a' : c;
-}
diff --git a/newlib/libc/ctype/_toupper.c b/newlib/libc/ctype/_toupper.c
deleted file mode 100644
index db4e00dd0..000000000
--- a/newlib/libc/ctype/_toupper.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef _toupper
-int
-_DEFUN(_toupper,(c),int c)
-{
-  return islower(c) ? c - 'a' + 'A' : c;
-}
diff --git a/newlib/libc/ctype/ctype.tex b/newlib/libc/ctype/ctype.tex
deleted file mode 100644
index df398f609..000000000
--- a/newlib/libc/ctype/ctype.tex
+++ /dev/null
@@ -1,136 +0,0 @@
-@node Ctype
-@chapter Character Type Macros and Functions (@file{ctype.h})
-This chapter groups macros (which are also available as subroutines)
-to classify characters into several categories (alphabetic,
-numeric, control characters, whitespace, and so on), or to perform
-simple character mappings.
-
-The header file @file{ctype.h} defines the macros.
-@menu 
-* isalnum::   Alphanumeric character predicate
-* isalpha::   Alphabetic character predicate
-* isascii::   ASCII character predicate
-* iscntrl::   Control character predicate
-* isdigit::   Decimal digit predicate
-* islower::   Lower-case character predicate
-* isprint::   Printable character predicates (isprint, isgraph)
-* ispunct::   Punctuation character predicate
-* isspace::   Whitespace character predicate
-* isupper::   Uppercase character predicate
-* isxdigit::  Hexadecimal digit predicate
-* toascii::   Force integers to ASCII range
-* tolower::   Translate characters to lower case
-* toupper::   Translate characters to upper case
-* iswalnum::  Alphanumeric wide-character predicate
-* iswalpha::  Alphabetic wide-character predicate
-* iswcntrl::  Control wide-character predicate
-* iswdigit::  Decimal digit wide-character predicate
-* iswgraph::  Graphic wide-character predicate
-* iswlower::  Lower-case wide-character predicate
-* iswprint::  Printable wide-character predicate
-* iswpunct::  Punctuation wide-character predicate
-* iswspace::  Whitespace wide-character predicate
-* iswupper::  Uppercase wide-character predicate
-* iswxdigit:: Hexadecimal digit wide-character predicate
-* iswctype::  Extensible wide-character test
-* wctype::    Compute wide-character test type
-* towlower::  Translate wide-characters to lower case
-* towupper::  Translate wide-characters to upper case
-* towctrans:: Extensible wide-character case mapping
-* wctrans::   Compute wide-character translation type
-@end menu
-
-@page
-@include ctype/isalnum.def
-
-@page
-@include ctype/isalpha.def
-
-@page
-@include ctype/isascii.def
-
-@page
-@include ctype/iscntrl.def
-
-@page
-@include ctype/isdigit.def
-
-@page
-@include ctype/islower.def
-
-@page
-@include ctype/isprint.def
-
-@page
-@include ctype/ispunct.def
-
-@page
-@include ctype/isspace.def
-
-@page
-@include ctype/isupper.def
-
-@page
-@include ctype/isxdigit.def
-
-@page
-@include ctype/toascii.def
-
-@page
-@include ctype/tolower.def
-
-@page
-@include ctype/toupper.def
-
-@page
-@include ctype/iswalnum.def
-
-@page
-@include ctype/iswalpha.def
-
-@page
-@include ctype/iswcntrl.def
-
-@page
-@include ctype/iswdigit.def
-
-@page
-@include ctype/iswgraph.def
-
-@page
-@include ctype/iswlower.def
-
-@page
-@include ctype/iswprint.def
-
-@page
-@include ctype/iswpunct.def
-
-@page
-@include ctype/iswspace.def
-
-@page
-@include ctype/iswupper.def
-
-@page
-@include ctype/iswxdigit.def
-
-@page
-@include ctype/iswctype.def
-
-@page
-@include ctype/wctype.def
-
-@page
-@include ctype/towlower.def
-
-@page
-@include ctype/towupper.def
-
-@page
-@include ctype/towctrans.def
-
-@page
-@include ctype/wctrans.def
-
-
diff --git a/newlib/libc/ctype/ctype_.c b/newlib/libc/ctype/ctype_.c
deleted file mode 100644
index 9991dd222..000000000
--- a/newlib/libc/ctype/ctype_.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (c) 1989 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)ctype_.c	5.6 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <ctype.h>
-
-#define _CTYPE_DATA_0_127 \
-	_C,	_C,	_C,	_C,	_C,	_C,	_C,	_C, \
-	_C,	_C|_S,	_C|_S,	_C|_S,	_C|_S,	_C|_S,	_C,	_C, \
-	_C,	_C,	_C,	_C,	_C,	_C,	_C,	_C, \
-	_C,	_C,	_C,	_C,	_C,	_C,	_C,	_C, \
-	_S|_B,	_P,	_P,	_P,	_P,	_P,	_P,	_P, \
-	_P,	_P,	_P,	_P,	_P,	_P,	_P,	_P, \
-	_N,	_N,	_N,	_N,	_N,	_N,	_N,	_N, \
-	_N,	_N,	_P,	_P,	_P,	_P,	_P,	_P, \
-	_P,	_U|_X,	_U|_X,	_U|_X,	_U|_X,	_U|_X,	_U|_X,	_U, \
-	_U,	_U,	_U,	_U,	_U,	_U,	_U,	_U, \
-	_U,	_U,	_U,	_U,	_U,	_U,	_U,	_U, \
-	_U,	_U,	_U,	_P,	_P,	_P,	_P,	_P, \
-	_P,	_L|_X,	_L|_X,	_L|_X,	_L|_X,	_L|_X,	_L|_X,	_L, \
-	_L,	_L,	_L,	_L,	_L,	_L,	_L,	_L, \
-	_L,	_L,	_L,	_L,	_L,	_L,	_L,	_L, \
-	_L,	_L,	_L,	_P,	_P,	_P,	_P,	_C
-
-#define _CTYPE_DATA_128_256 \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0, \
-	0,	0,	0,	0,	0,	0,	0,	0
-
-#if defined(__GNUC__) && !defined(__CHAR_UNSIGNED__) && !defined(COMPACT_CTYPE)
-#define ALLOW_NEGATIVE_CTYPE_INDEX
-#endif
-
-#if defined(ALLOW_NEGATIVE_CTYPE_INDEX)
-static _CONST char _ctype_b[128 + 256] = {
-	_CTYPE_DATA_128_256,
-	_CTYPE_DATA_0_127,
-	_CTYPE_DATA_128_256
-};
-
-#if defined(__CYGWIN__)
-extern _CONST char __declspec(dllexport) _ctype_[1 + 256] __attribute__ ((alias ("_ctype_b+127")));
-_CONST char __declspec(dllexport) *__ctype_ptr = _ctype_b + 128;
-#else
-extern _CONST char _ctype_[1 + 256] __attribute__ ((alias ("_ctype_b+127")));
-_CONST char *__ctype_ptr = _ctype_b + 128;
-#endif
-
-#else	/* !defined(ALLOW_NEGATIVE_CTYPE_INDEX) */
-
-#if defined(__CYGWIN__)
-_CONST char __declspec(dllexport) _ctype_[1 + 256] = {
-#else
-_CONST char _ctype_[1 + 256] = {
-#endif
-	0,
-	_CTYPE_DATA_0_127,
-	_CTYPE_DATA_128_256
-};
-
-_CONST char *__ctype_ptr = _ctype_ + 1;
-#endif
diff --git a/newlib/libc/ctype/isalnum.c b/newlib/libc/ctype/isalnum.c
deleted file mode 100644
index 7e05bd1a2..000000000
--- a/newlib/libc/ctype/isalnum.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-FUNCTION 
-	<<isalnum>>---alphanumeric character predicate
-
-INDEX
-	isalnum
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isalnum(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isalnum(<[c]>);
-
-
-DESCRIPTION
-<<isalnum>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for alphabetic or
-numeric ASCII characters, and <<0>> for other arguments.  It is defined
-for all integer values.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isalnum>>'.
-
-RETURNS
-<<isalnum>> returns non-zero if <[c]> is a letter (<<a>>--<<z>> or
-<<A>>--<<Z>>) or a digit (<<0>>--<<9>>).
-
-PORTABILITY
-<<isalnum>> is ANSI C.
-
-No OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef isalnum
-
-int
-_DEFUN(isalnum,(c),int c)
-{
-	return((_ctype_ + 1)[c] & (_U|_L|_N));
-}
-
diff --git a/newlib/libc/ctype/isalpha.c b/newlib/libc/ctype/isalpha.c
deleted file mode 100644
index 35f14d396..000000000
--- a/newlib/libc/ctype/isalpha.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-	<<isalpha>>---alphabetic character predicate
-
-INDEX
-	isalpha
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isalpha(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isalpha(<[c]>);
-
-DESCRIPTION
-<<isalpha>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero when <[c]> represents an
-alphabetic ASCII character, and 0 otherwise.  It is defined only when
-<<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isalpha>>'.
-
-RETURNS
-<<isalpha>> returns non-zero if <[c]> is a letter (<<A>>--<<Z>> or
-<<a>>--<<z>>). 
-
-PORTABILITY
-<<isalpha>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef isalpha
-int
-_DEFUN(isalpha,(c),int c)
-{
-	return((_ctype_ + 1)[c] & (_U|_L));
-}
-
diff --git a/newlib/libc/ctype/isascii.c b/newlib/libc/ctype/isascii.c
deleted file mode 100644
index 109fd3ace..000000000
--- a/newlib/libc/ctype/isascii.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-FUNCTION
-	<<isascii>>---ASCII character predicate
-
-INDEX
-	isascii
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isascii(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isascii(<[c]>);
-
-DESCRIPTION
-<<isascii>> is a macro which returns non-zero when <[c]> is an ASCII
-character, and 0 otherwise.  It is defined for all integer values.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isascii>>'.
-
-RETURNS
-<<isascii>> returns non-zero if the low order byte of <[c]> is in the range
-0 to 127 (<<0x00>>--<<0x7F>>).
-
-PORTABILITY
-<<isascii>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <ctype.h>
-
-
-
-#undef isascii
-
-int 
-_DEFUN(isascii,(c),int c)
-{
-	return c >= 0 && c< 128;
-}
diff --git a/newlib/libc/ctype/isblank.c b/newlib/libc/ctype/isblank.c
deleted file mode 100644
index c75d8ab02..000000000
--- a/newlib/libc/ctype/isblank.c
+++ /dev/null
@@ -1,40 +0,0 @@
-
-/*
-FUNCTION
-	<<isblank>>---blank character predicate
-
-INDEX
-	isblank
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isblank(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isblank(<[c]>);
-
-DESCRIPTION
-<<isblank>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for blank characters, and 0 
-for other characters.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isblank>>'.
-
-RETURNS
-<<isblank>> returns non-zero if <[c]> is a blank character.
-
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-
-
-#undef isblank
-int
-_DEFUN(isblank,(c),int c)
-{
-	return (c == ' ' || c == '\t');
-}
diff --git a/newlib/libc/ctype/iscntrl.c b/newlib/libc/ctype/iscntrl.c
deleted file mode 100644
index 7b6da349d..000000000
--- a/newlib/libc/ctype/iscntrl.c
+++ /dev/null
@@ -1,48 +0,0 @@
-
-/*
-FUNCTION
-	<<iscntrl>>---control character predicate
-
-INDEX
-	iscntrl
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int iscntrl(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int iscntrl(<[c]>);
-
-DESCRIPTION
-<<iscntrl>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for control characters, and 0 
-for other characters.  It is defined only when <<isascii>>(<[c]>) is
-true or <[c]> is EOF. 
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef iscntrl>>'.
-
-RETURNS
-<<iscntrl>> returns non-zero if <[c]> is a delete character or ordinary
-control character (<<0x7F>> or <<0x00>>--<<0x1F>>).
-
-PORTABILITY
-<<iscntrl>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-
-
-#undef iscntrl
-int
-_DEFUN(iscntrl,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _C);
-}
-
-
diff --git a/newlib/libc/ctype/isdigit.c b/newlib/libc/ctype/isdigit.c
deleted file mode 100644
index 5c21898e6..000000000
--- a/newlib/libc/ctype/isdigit.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-FUNCTION
-<<isdigit>>---decimal digit predicate
-
-INDEX
-isdigit
-
-ANSI_SYNOPSIS
-#include <ctype.h>
-int isdigit(int <[c]>);
-
-TRAD_SYNOPSIS
-#include <ctype.h>
-int isdigit(<[c]>);
-
-DESCRIPTION
-<<isdigit>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for decimal digits, and 0 for
-other characters.  It is defined only when <<isascii>>(<[c]>) is true
-or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isdigit>>'.
-
-RETURNS
-<<isdigit>> returns non-zero if <[c]> is a decimal digit (<<0>>--<<9>>).
-
-PORTABILITY
-<<isdigit>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-
-#undef isdigit
-int
-_DEFUN(isdigit,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _N);
-}
diff --git a/newlib/libc/ctype/islower.c b/newlib/libc/ctype/islower.c
deleted file mode 100644
index 81ad0bb27..000000000
--- a/newlib/libc/ctype/islower.c
+++ /dev/null
@@ -1,43 +0,0 @@
-
-/*
-FUNCTION
-<<islower>>---lower-case character predicate
-
-INDEX
-islower
-
-ANSI_SYNOPSIS
-#include <ctype.h>
-int islower(int <[c]>);
-
-TRAD_SYNOPSIS
-#include <ctype.h>
-int islower(<[c]>);
-
-DESCRIPTION
-<<islower>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for minuscules
-(lower-case alphabetic characters), and 0 for other characters.
-It is defined only when <<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef islower>>'.
-
-RETURNS
-<<islower>> returns non-zero if <[c]> is a lower case letter (<<a>>--<<z>>).
-
-PORTABILITY
-<<islower>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef islower
-int
-_DEFUN(islower,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _L);
-}
-
diff --git a/newlib/libc/ctype/isprint.c b/newlib/libc/ctype/isprint.c
deleted file mode 100644
index 2ff00f4e3..000000000
--- a/newlib/libc/ctype/isprint.c
+++ /dev/null
@@ -1,60 +0,0 @@
-
-/*
-FUNCTION
-	<<isprint>>, <<isgraph>>---printable character predicates
-
-INDEX
-	isprint
-INDEX
-	isgraph
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isprint(int <[c]>);
-	int isgraph(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isprint(<[c]>);
-	int isgraph(<[c]>);
-
-
-DESCRIPTION
-<<isprint>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for printable
-characters, and 0 for other character arguments. 
-It is defined only when <<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining either macro using `<<#undef isprint>>' or `<<#undef isgraph>>'.
-
-RETURNS
-<<isprint>> returns non-zero if <[c]> is a printing character,
-(<<0x20>>--<<0x7E>>).
-<<isgraph>> behaves identically to <<isprint>>, except that the space
-character (<<0x20>>) is excluded.
-
-PORTABILITY
-<<isprint>> and <<isgraph>> are ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef isgraph
-int
-_DEFUN(isgraph,(c),int c)
-{
-	return((_ctype_ + 1)[c] & (_P|_U|_L|_N));
-}
-
-
-#undef isprint
-int
-_DEFUN(isprint,(c),int c)
-{
-	return((_ctype_ + 1)[c] & (_P|_U|_L|_N|_B));
-}
-
diff --git a/newlib/libc/ctype/ispunct.c b/newlib/libc/ctype/ispunct.c
deleted file mode 100644
index c5679323c..000000000
--- a/newlib/libc/ctype/ispunct.c
+++ /dev/null
@@ -1,46 +0,0 @@
-
-/*
-FUNCTION
-<<ispunct>>---punctuation character predicate
-
-INDEX
-ispunct
-
-ANSI_SYNOPSIS
-#include <ctype.h>
-int ispunct(int <[c]>);
-
-TRAD_SYNOPSIS
-#include <ctype.h>
-int ispunct(<[c]>);
-
-DESCRIPTION
-<<ispunct>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for printable
-punctuation characters, and 0 for other characters.  It is defined
-only when <<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef ispunct>>'.
-
-RETURNS
-<<ispunct>> returns non-zero if <[c]> is a printable punctuation character 
-(<<isgraph(<[c]>) && !isalnum(<[c]>)>>).
-
-PORTABILITY
-<<ispunct>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-
-#undef ispunct
-int
-_DEFUN(ispunct,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _P);
-}
-
diff --git a/newlib/libc/ctype/isspace.c b/newlib/libc/ctype/isspace.c
deleted file mode 100644
index 1bc0798a2..000000000
--- a/newlib/libc/ctype/isspace.c
+++ /dev/null
@@ -1,44 +0,0 @@
-
-/*
-FUNCTION
-	<<isspace>>---whitespace character predicate
-
-INDEX
-	isspace
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int isspace(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int isspace(<[c]>);
-
-DESCRIPTION
-<<isspace>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for whitespace
-characters, and 0 for other characters.  It is defined only when <<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isspace>>'.
-
-RETURNS
-<<isspace>> returns non-zero if <[c]> is a space, tab, carriage return, new
-line, vertical tab, or formfeed (<<0x09>>--<<0x0D>>, <<0x20>>).
-
-PORTABILITY
-<<isspace>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <ctype.h>
-
-
-#undef isspace
-int
-_DEFUN(isspace,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _S);
-}
-
diff --git a/newlib/libc/ctype/isupper.c b/newlib/libc/ctype/isupper.c
deleted file mode 100644
index 8127e25da..000000000
--- a/newlib/libc/ctype/isupper.c
+++ /dev/null
@@ -1,43 +0,0 @@
-
-/*
-FUNCTION
-<<isupper>>---uppercase character predicate
-
-INDEX
-isupper
-
-ANSI_SYNOPSIS
-#include <ctype.h>
-int isupper(int <[c]>);
-
-TRAD_SYNOPSIS
-#include <ctype.h>
-int isupper(<[c]>);
-
-DESCRIPTION
-<<isupper>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for upper-case letters
-(<<A>>--<<Z>>), and 0 for other characters.  It is defined only when
-<<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isupper>>'.
-
-RETURNS
-<<isupper>> returns non-zero if <[c]> is a upper case letter (A-Z).
-
-PORTABILITY
-<<isupper>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef isupper
-int
-_DEFUN(isupper,(c),int c)
-{
-	return((_ctype_ + 1)[c] & _U);
-}
-
diff --git a/newlib/libc/ctype/iswalnum.c b/newlib/libc/ctype/iswalnum.c
deleted file mode 100644
index 12613c7a1..000000000
--- a/newlib/libc/ctype/iswalnum.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-FUNCTION
-	<<iswalnum>>---alpha-numeric wide-character test
-
-INDEX
-	iswalnum
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswalnum(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswalnum(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswalnum>> is a function which classifies wide-character values that
-are alpha-numeric.
-
-RETURNS
-<<iswalnum>> returns non-zero if <[c]> is a alpha-numeric wide-character.
-
-PORTABILITY
-<<iswalnum>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswalnum,(c),wint_t c)
-{
-  return (iswalpha (c) || iswdigit (c));
-}
-
diff --git a/newlib/libc/ctype/iswalpha.c b/newlib/libc/ctype/iswalpha.c
deleted file mode 100644
index 97fda7f17..000000000
--- a/newlib/libc/ctype/iswalpha.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswalpha>>---alphabetic wide-character test
-
-INDEX
-	iswalpha
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswalpha(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswalpha(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswalpha>> is a function which classifies wide-character values that
-are alphabetic.
-
-RETURNS
-<<iswalpha>> returns non-zero if <[c]> is an alphabetic wide-character.
-
-PORTABILITY
-<<iswalpha>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <string.h>
-#include <ctype.h>
-#include "local.h"
-
-#ifdef MB_CAPABLE
-#include "utf8alpha.h"
-#endif /* MB_CAPABLE */
-
-int
-_DEFUN(iswalpha,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      unsigned const char *table;
-      unsigned char *ptr;
-      unsigned char ctmp;
-      int size;
-      wint_t x = (c >> 8);
-      
-      /* for some large sections, all characters are alphabetic so handle them here */
-      if ((x >= 0x34 && x <= 0x4c) ||
-	  (x >= 0x4e && x <= 0x9e) ||
-	  (x >= 0xac && x <= 0xd6) ||
-	  (x >= 0x200 && x <= 0x2a5))
-	return 1;
-      
-      switch (x)
-	{
-	case 0x00:
-	  table = u0;
-	  size = sizeof(u0);
-	  break;
-	case 0x01:
-	case 0x15:
-	case 0xa0:
-	case 0xa1:
-	case 0xa2:
-	case 0xa3:
-	case 0xf9:
-	case 0xfc:
-	case 0x2f8:
-	case 0x2f9:
-	  return 1;
-	case 0x02:
-	  table = u2;
-	  size = sizeof(u2);
-	  break;
-	case 0x03:
-	  table = u3;
-	  size = sizeof(u3);
-	  break;
-	case 0x04:
-	  table = u4;
-	  size = sizeof(u4);
-	  break;
-	case 0x05:
-	  table = u5;
-	  size = sizeof(u5);
-	  break;
-	case 0x06:
-	  table = u6;
-	  size = sizeof(u6);
-	  break;
-	case 0x07:
-	  table = u7;
-	  size = sizeof(u7);
-	  break;
-	case 0x09:
-	  table = u9;
-	  size = sizeof(u9);
-	  break;
-	case 0x0a:
-	  table = ua;
-	  size = sizeof(ua);
-	  break;
-	case 0x0b:
-	  table = ub;
-	  size = sizeof(ub);
-	  break;
-	case 0x0c:
-	  table = uc;
-	  size = sizeof(uc);
-	  break;
-	case 0x0d:
-	  table = ud;
-	  size = sizeof(ud);
-	  break;
-	case 0x0e:
-	  table = ue;
-	  size = sizeof(ue);
-	  break;
-	case 0x0f:
-	  table = uf;
-	  size = sizeof(uf);
-	  break;
-	case 0x10:
-	  table = u10;
-	  size = sizeof(u10);
-	  break;
-	case 0x11:
-	  table = u11;
-	  size = sizeof(u11);
-	  break;
-	case 0x12:
-	  table = u12;
-	  size = sizeof(u12);
-	  break;
-	case 0x13:
-	  table = u13;
-	  size = sizeof(u13);
-	  break;
-	case 0x14:
-	  table = u14;
-	  size = sizeof(u14);
-	  break;
-	case 0x16:
-	  table = u16;
-	  size = sizeof(u16);
-	  break;
-	case 0x17:
-	  table = u17;
-	  size = sizeof(u17);
-	  break;
-	case 0x18:
-	  table = u18;
-	  size = sizeof(u18);
-	  break;
-	case 0x1e:
-	  table = u1e;
-	  size = sizeof(u1e);
-	  break;
-	case 0x1f:
-	  table = u1f;
-	  size = sizeof(u1f);
-	  break;
-	case 0x20:
-	  table = u20;
-	  size = sizeof(u20);
-	  break;
-	case 0x21:
-	  table = u21;
-	  size = sizeof(u21);
-	  break;
-	case 0x24:
-	  table = u24;
-	  size = sizeof(u24);
-	  break;
-	case 0x30:
-	  table = u30;
-	  size = sizeof(u30);
-	  break;
-	case 0x31:
-	  table = u31;
-	  size = sizeof(u31);
-	  break;
-	case 0x4d:
-	  table = u4d;
-	  size = sizeof(u4d);
-	  break;
-	case 0x9f:
-	  table = u9f;
-	  size = sizeof(u9f);
-	  break;
-	case 0xa4:
-	  table = ua4;
-	  size = sizeof(ua4);
-	  break;
-	case 0xd7:
-	  table = ud7;
-	  size = sizeof(ud7);
-	  break;
-	case 0xfa:
-	  table = ufa;
-	  size = sizeof(ufa);
-	  break;
-	case 0xfb:
-	  table = ufb;
-	  size = sizeof(ufb);
-	  break;
-	case 0xfd:
-	  table = ufd;
-	  size = sizeof(ufd);
-	  break;
-	case 0xfe:
-	  table = ufe;
-	  size = sizeof(ufe);
-	  break;
-	case 0xff:
-	  table = uff;
-	  size = sizeof(uff);
-	  break;
-	case 0x103:
-	  table = u103;
-	  size = sizeof(u103);
-	  break;
-	case 0x104:
-	  table = u104;
-	  size = sizeof(u104);
-	  break;
-	case 0x1d4:
-	  table = u1d4;
-	  size = sizeof(u1d4);
-	  break;
-	case 0x1d5:
-	  table = u1d5;
-	  size = sizeof(u1d5);
-	  break;
-	case 0x1d6:
-	  table = u1d6;
-	  size = sizeof(u1d6);
-	  break;
-	case 0x1d7:
-	  table = u1d7;
-	  size = sizeof(u1d7);
-	  break;
-	case 0x2a6:
-	  table = u2a6;
-	  size = sizeof(u2a6);
-	  break;
-	case 0x2fa:
-	  table = u2fa;
-	  size = sizeof(u2fa);
-	  break;
-	default:
-	  return 0;
-	}
-      /* we have narrowed down to a section of 256 characters to check */
-      /* now check if c matches the alphabetic wide-chars within that section */
-      ptr = (unsigned char *)table;
-      ctmp = (unsigned char)c;
-      while (ptr < table + size)
-	{
-	  if (ctmp == *ptr)
-	    return 1;
-	  if (ctmp < *ptr)
-	    return 0;
-	  /* otherwise c > *ptr */
-	  /* look for 0x0 as next element which indicates a range */
-	  ++ptr;
-	  if (*ptr == 0x0)
-	    {
-	      /* we have a range..see if c falls within range */
-	      ++ptr;
-	      if (ctmp <= *ptr)
-		return 1;
-	      ++ptr;
-	    }
-	}
-      /* not in table */
-      return 0;
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < (wint_t)0x100 ? isalpha (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswblank.c b/newlib/libc/ctype/iswblank.c
deleted file mode 100644
index 8834e954d..000000000
--- a/newlib/libc/ctype/iswblank.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswblank>>---wide-character blank test
-
-INDEX
-	iswblank
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswblank(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswblank(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswblank>> is a function which classifies wide-character values that
-are categorized as blank.
-
-RETURNS
-<<iswblank>> returns non-zero if <[c]> is a blank wide-character.
-
-PORTABILITY
-<<iswblank>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <ctype.h>
-#include <string.h>
-#include "local.h"
-
-int
-_DEFUN(iswblank,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      return (c == 0x0009 || c == 0x0020 || c == 0x1680 ||
-              (c >= 0x2000 && c <= 0x2006) ||
-              (c >= 0x2008 && c <= 0x200b) ||
-              c == 0x205f || c == 0x3000);
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < 0x100 ? isblank (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswcntrl.c b/newlib/libc/ctype/iswcntrl.c
deleted file mode 100644
index b33af01ee..000000000
--- a/newlib/libc/ctype/iswcntrl.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswcntrl>>---wide-character cntrl test
-
-INDEX
-	iswcntrl
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswcntrl(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswcntrl(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswcntrl>> is a function which classifies wide-character values that
-are categorized as a control character.
-
-RETURNS
-<<iswcntrl>> returns non-zero if <[c]> is a control wide-character.
-
-PORTABILITY
-<<iswcntrl>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <ctype.h>
-#include <string.h>
-#include "local.h"
-
-int
-_DEFUN(iswcntrl,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      return ((c >= 0x0000 && c <= 0x001f) || 
-              (c >= 0x007f && c <= 0x009f) ||
-              c == 0x2028 || c == 0x2029);
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < 0x100 ? iscntrl (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswctype.c b/newlib/libc/ctype/iswctype.c
deleted file mode 100644
index fbf5da7be..000000000
--- a/newlib/libc/ctype/iswctype.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-FUNCTION
-	<<iswctype>>---extensible wide-character test
-
-INDEX
-	iswctype
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswctype(wint_t <[c]>, wctype_t <[desc]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswctype(<[c]>, <[desc]>)
-	wint_t <[c]>;
-	wctype_t <[desc]>;
-
-DESCRIPTION
-<<iswctype>> is a function which classifies wide-character values using the
-wide-character test specified by <[desc]>.
-
-RETURNS
-<<iswctype>> returns non-zero if and only if <[c]> matches the test specified by <[desc]>.
-If <[desc]> is unknown, zero is returned.
-
-PORTABILITY
-<<iswctype>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include "local.h"
-
-int
-_DEFUN(iswctype,(c, desc), wint_t c _AND wctype_t desc)
-{
-  switch (desc)
-    {
-    case WC_ALNUM:
-      return iswalnum (c);
-    case WC_ALPHA:
-      return iswalpha (c);
-    case WC_BLANK:
-      return iswblank (c);
-    case WC_CNTRL:
-      return iswcntrl (c);
-    case WC_DIGIT:
-      return iswdigit (c);
-    case WC_GRAPH:
-      return iswgraph (c);
-    case WC_LOWER:
-      return iswlower (c);
-    case WC_PRINT:
-      return iswprint (c);
-    case WC_PUNCT:
-      return iswpunct (c);
-    case WC_SPACE:
-      return iswspace (c);
-    case WC_UPPER:
-      return iswupper (c);
-    case WC_XDIGIT:
-      return iswxdigit (c);
-    default:
-    }
-
-  /* otherwise unknown */
-  return 0;
-}
-
diff --git a/newlib/libc/ctype/iswdigit.c b/newlib/libc/ctype/iswdigit.c
deleted file mode 100644
index 94c74ae9c..000000000
--- a/newlib/libc/ctype/iswdigit.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-FUNCTION
-	<<iswdigit>>---decimal digit wide-character test
-
-INDEX
-	iswdigit
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswdigit(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswdigit(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswdigit>> is a function which classifies wide-character values that
-are decimal digits.
-
-RETURNS
-<<iswdigit>> returns non-zero if <[c]> is a decimal digit wide-character.
-
-PORTABILITY
-<<iswdigit>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswdigit,(c), wint_t c)
-{
-  return (c >= (wint_t)'0' && c <= (wint_t)'9');
-}
-
diff --git a/newlib/libc/ctype/iswgraph.c b/newlib/libc/ctype/iswgraph.c
deleted file mode 100644
index 880c66478..000000000
--- a/newlib/libc/ctype/iswgraph.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswgraph>>---graphic wide-character test
-
-INDEX
-	iswgraph
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswgraph(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswgraph(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswgraph>> is a function which classifies wide-character values that
-are graphic.
-
-RETURNS
-<<iswgraph>> returns non-zero if <[c]> is a graphic wide-character.
-
-PORTABILITY
-<<iswgraph>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswgraph,(c),wint_t c)
-{
-  return (iswprint (c) && !iswspace (c));
-}
-
diff --git a/newlib/libc/ctype/iswlower.c b/newlib/libc/ctype/iswlower.c
deleted file mode 100644
index d320486a9..000000000
--- a/newlib/libc/ctype/iswlower.c
+++ /dev/null
@@ -1,38 +0,0 @@
-
-/*
-FUNCTION
-	<<iswlower>>---lower-case wide-character test
-
-INDEX
-	iswlower
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswlower(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswlower(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswlower>> is a function which classifies wide-character values that
-have an upper-case translation.
-
-RETURNS
-<<iswlower>> returns non-zero if <[c]> is a lower-case wide-character.
-
-PORTABILITY
-<<iswlower>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswlower,(c),wint_t c)
-{
-	return (towupper (c) != c);
-}
-
diff --git a/newlib/libc/ctype/iswprint.c b/newlib/libc/ctype/iswprint.c
deleted file mode 100644
index 5acba9cd7..000000000
--- a/newlib/libc/ctype/iswprint.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswprint>>---printable wide-character test
-
-INDEX
-	iswprint
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswprint(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswprint(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswprint>> is a function which classifies wide-character values that
-are printable.
-
-RETURNS
-<<iswprint>> returns non-zero if <[c]> is a printable wide-character.
-
-PORTABILITY
-<<iswprint>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <string.h>
-#include <ctype.h>
-#include "local.h"
-
-#ifdef MB_CAPABLE
-#include "utf8print.h"
-#endif /* MB_CAPABLE */
-
-int
-_DEFUN(iswprint,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      unsigned const char *table;
-      unsigned char *ptr;
-      unsigned char ctmp;
-      int size;
-      wint_t x = (c >> 8);
-      
-      /* for some large sections, all characters are printuation so handle them here */
-      if ((x >= 0x34 && x <= 0x4c) ||
-	  (x >= 0x4e && x <= 0x9e) ||
-	  (x >= 0xac && x <= 0xd6) ||
-	  (x >= 0xe0 && x <= 0xf9) ||
-	  (x >= 0x200 && x <= 0x2a5) ||
-	  (x >= 0xf00 && x <= 0xffe) ||
-	  (x >= 0x1000 && x <= 0x10fe))
-	return 1;
-      
-      switch (x)
-	{
-	case 0x01:
-	case 0x15:
-	case 0x22:
-	case 0x25:
-	case 0x28:
-	case 0x29:
-	case 0x2a:
-	case 0xa0:
-	case 0xa1:
-	case 0xa2:
-	case 0xa3:
-	case 0xfc:
-	case 0x2f8:
-	case 0x2f9:
-	  return 1;
-	case 0x00:
-	  table = u0;
-	  size = sizeof(u0);
-	  break;
-	case 0x02:
-	  table = u2;
-	  size = sizeof(u2);
-	  break;
-	case 0x03:
-	  table = u3;
-	  size = sizeof(u3);
-	  break;
-	case 0x04:
-	  table = u4;
-	  size = sizeof(u4);
-	  break;
-	case 0x05:
-	  table = u5;
-	  size = sizeof(u5);
-	  break;
-	case 0x06:
-	  table = u6;
-	  size = sizeof(u6);
-	  break;
-	case 0x07:
-	  table = u7;
-	  size = sizeof(u7);
-	  break;
-	case 0x09:
-	  table = u9;
-	  size = sizeof(u9);
-	  break;
-	case 0x0a:
-	  table = ua;
-	  size = sizeof(ua);
-	  break;
-	case 0x0b:
-	  table = ub;
-	  size = sizeof(ub);
-	  break;
-	case 0x0c:
-	  table = uc;
-	  size = sizeof(uc);
-	  break;
-	case 0x0d:
-	  table = ud;
-	  size = sizeof(ud);
-	  break;
-	case 0x0e:
-	  table = ue;
-	  size = sizeof(ue);
-	  break;
-	case 0x0f:
-	  table = uf;
-	  size = sizeof(uf);
-	  break;
-	case 0x10:
-	  table = u10;
-	  size = sizeof(u10);
-	  break;
-	case 0x11:
-	  table = u11;
-	  size = sizeof(u11);
-	  break;
-	case 0x12:
-	  table = u12;
-	  size = sizeof(u12);
-	  break;
-	case 0x13:
-	  table = u13;
-	  size = sizeof(u13);
-	  break;
-	case 0x14:
-	  table = u14;
-	  size = sizeof(u14);
-	  break;
-	case 0x16:
-	  table = u16;
-	  size = sizeof(u16);
-	  break;
-	case 0x17:
-	  table = u17;
-	  size = sizeof(u17);
-	  break;
-	case 0x18:
-	  table = u18;
-	  size = sizeof(u18);
-	  break;
-	case 0x1e:
-	  table = u1e;
-	  size = sizeof(u1e);
-	  break;
-	case 0x1f:
-	  table = u1f;
-	  size = sizeof(u1f);
-	  break;
-	case 0x20:
-	  table = u20;
-	  size = sizeof(u20);
-	  break;
-	case 0x21:
-	  table = u21;
-	  size = sizeof(u21);
-	  break;
-	case 0x23:
-	  table = u23;
-	  size = sizeof(u23);
-	  break;
-	case 0x24:
-	  table = u24;
-	  size = sizeof(u24);
-	  break;
-	case 0x26:
-	  table = u26;
-	  size = sizeof(u26);
-	  break;
-	case 0x27:
-	  table = u27;
-	  size = sizeof(u27);
-	  break;
-	case 0x2e:
-	  table = u2e;
-	  size = sizeof(u2e);
-	  break;
-	case 0x2f:
-	  table = u2f;
-	  size = sizeof(u2f);
-	  break;
-	case 0x30:
-	  table = u30;
-	  size = sizeof(u30);
-	  break;
-	case 0x31:
-	  table = u31;
-	  size = sizeof(u31);
-	  break;
-	case 0x32:
-	  table = u32;
-	  size = sizeof(u32);
-	  break;
-	case 0x33:
-	  table = u33;
-	  size = sizeof(u33);
-	  break;
-	case 0x4d:
-	  table = u4d;
-	  size = sizeof(u4d);
-	  break;
-	case 0x9f:
-	  table = u9f;
-	  size = sizeof(u9f);
-	  break;
-	case 0xa4:
-	  table = ua4;
-	  size = sizeof(ua4);
-	  break;
-	case 0xd7:
-	  table = ud7;
-	  size = sizeof(ud7);
-	  break;
-	case 0xfa:
-	  table = ufa;
-	  size = sizeof(ufa);
-	  break;
-	case 0xfb:
-	  table = ufb;
-	  size = sizeof(ufb);
-	  break;
-	case 0xfd:
-	  table = ufd;
-	  size = sizeof(ufd);
-	  break;
-	case 0xfe:
-	  table = ufe;
-	  size = sizeof(ufe);
-	  break;
-	case 0xff:
-	  table = uff;
-	  size = sizeof(uff);
-	  break;
-	case 0x103:
-	  table = u103;
-	  size = sizeof(u103);
-	  break;
-	case 0x104:
-	  table = u104;
-	  size = sizeof(u104);
-	  break;
-	case 0x1d0:
-	  table = u1d0;
-	  size = sizeof(u1d0);
-	  break;
-	case 0x1d1:
-	  table = u1d1;
-	  size = sizeof(u1d1);
-	  break;
-	case 0x1d4:
-	  table = u1d4;
-	  size = sizeof(u1d4);
-	  break;
-	case 0x1d5:
-	  table = u1d5;
-	  size = sizeof(u1d5);
-	  break;
-	case 0x1d6:
-	  table = u1d6;
-	  size = sizeof(u1d6);
-	  break;
-	case 0x1d7:
-	  table = u1d7;
-	  size = sizeof(u1d7);
-	  break;
-	case 0x2a6:
-	  table = u2a6;
-	  size = sizeof(u2a6);
-	  break;
-	case 0x2fa:
-	  table = u2fa;
-	  size = sizeof(u2fa);
-	  break;
-	case 0xe00:
-	  table = ue00;
-	  size = sizeof(ue00);
-	  break;
-	case 0xfff:
-	  table = ufff;
-	  size = sizeof(ufff);
-	  break;
-	case 0x10ff:
-	  table = u10ff;
-	  size = sizeof(u10ff);
-	  break;
-	default:
-	  return 0;
-	}
-      /* we have narrowed down to a section of 256 characters to check */
-      /* now check if c matches the printuation wide-chars within that section */
-      ptr = (unsigned char *)table;
-      ctmp = (unsigned char)c;
-      while (ptr < table + size)
-	{
-	  if (ctmp == *ptr)
-	    return 1;
-	  if (ctmp < *ptr)
-	    return 0;
-	  /* otherwise c > *ptr */
-	  /* look for 0x0 as next element which indicates a range */
-	  ++ptr;
-	  if (*ptr == 0x0)
-	    {
-	      /* we have a range..see if c falls within range */
-	      ++ptr;
-	      if (ctmp <= *ptr)
-		return 1;
-	      ++ptr;
-	    }
-	}
-      /* not in table */
-      return 0;
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < (wint_t)0x100 ? isprint (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswpunct.c b/newlib/libc/ctype/iswpunct.c
deleted file mode 100644
index 716fe5f62..000000000
--- a/newlib/libc/ctype/iswpunct.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswpunct>>---punctuation wide-character test
-
-INDEX
-	iswpunct
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswpunct(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswpunct(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswpunct>> is a function which classifies wide-character values that
-are punctuation.
-
-RETURNS
-<<iswpunct>> returns non-zero if <[c]> is a punctuation wide-character.
-
-PORTABILITY
-<<iswpunct>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <string.h>
-#include <ctype.h>
-#include "local.h"
-
-#ifdef MB_CAPABLE
-#include "utf8punct.h"
-#endif /* MB_CAPABLE */
-
-int
-_DEFUN(iswpunct,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      unsigned const char *table;
-      unsigned char *ptr;
-      unsigned char ctmp;
-      int size;
-      wint_t x = (c >> 8);
-      
-      /* for some large sections, all characters are punctuation so handle them here */
-      if ((x >= 0xe0 && x <= 0xf8) ||
-	  (x >= 0xf00 && x <= 0xffe) ||
-	  (x >= 0x1000 && x <= 0x10fe))
-	return 1;
-      
-      switch (x)
-	{
-	case 0x22:
-	case 0x25:
-	case 0x28:
-	case 0x29:
-	case 0x2a:
-	  return 1;
-	case 0x00:
-	  table = u0;
-	  size = sizeof(u0);
-	  break;
-	case 0x02:
-	  table = u2;
-	  size = sizeof(u2);
-	  break;
-	case 0x03:
-	  table = u3;
-	  size = sizeof(u3);
-	  break;
-	case 0x04:
-	  table = u4;
-	  size = sizeof(u4);
-	  break;
-	case 0x05:
-	  table = u5;
-	  size = sizeof(u5);
-	  break;
-	case 0x06:
-	  table = u6;
-	  size = sizeof(u6);
-	  break;
-	case 0x07:
-	  table = u7;
-	  size = sizeof(u7);
-	  break;
-	case 0x09:
-	  table = u9;
-	  size = sizeof(u9);
-	  break;
-	case 0x0a:
-	  table = ua;
-	  size = sizeof(ua);
-	  break;
-	case 0x0b:
-	  table = ub;
-	  size = sizeof(ub);
-	  break;
-	case 0x0c:
-	  table = uc;
-	  size = sizeof(uc);
-	  break;
-	case 0x0d:
-	  table = ud;
-	  size = sizeof(ud);
-	  break;
-	case 0x0e:
-	  table = ue;
-	  size = sizeof(ue);
-	  break;
-	case 0x0f:
-	  table = uf;
-	  size = sizeof(uf);
-	  break;
-	case 0x10:
-	  table = u10;
-	  size = sizeof(u10);
-	  break;
-	case 0x13:
-	  table = u13;
-	  size = sizeof(u13);
-	  break;
-	case 0x16:
-	  table = u16;
-	  size = sizeof(u16);
-	  break;
-	case 0x17:
-	  table = u17;
-	  size = sizeof(u17);
-	  break;
-	case 0x18:
-	  table = u18;
-	  size = sizeof(u18);
-	  break;
-	case 0x1f:
-	  table = u1f;
-	  size = sizeof(u1f);
-	  break;
-	case 0x20:
-	  table = u20;
-	  size = sizeof(u20);
-	  break;
-	case 0x21:
-	  table = u21;
-	  size = sizeof(u21);
-	  break;
-	case 0x23:
-	  table = u23;
-	  size = sizeof(u23);
-	  break;
-	case 0x24:
-	  table = u24;
-	  size = sizeof(u24);
-	  break;
-	case 0x26:
-	  table = u26;
-	  size = sizeof(u26);
-	  break;
-	case 0x27:
-	  table = u27;
-	  size = sizeof(u27);
-	  break;
-	case 0x2e:
-	  table = u2e;
-	  size = sizeof(u2e);
-	  break;
-	case 0x2f:
-	  table = u2f;
-	  size = sizeof(u2f);
-	  break;
-	case 0x30:
-	  table = u30;
-	  size = sizeof(u30);
-	  break;
-	case 0x31:
-	  table = u31;
-	  size = sizeof(u31);
-	  break;
-	case 0x32:
-	  table = u32;
-	  size = sizeof(u32);
-	  break;
-	case 0x33:
-	  table = u33;
-	  size = sizeof(u33);
-	  break;
-	case 0xa4:
-	  table = ua4;
-	  size = sizeof(ua4);
-	  break;
-	case 0xfb:
-	  table = ufb;
-	  size = sizeof(ufb);
-	  break;
-	case 0xfd:
-	  table = ufd;
-	  size = sizeof(ufd);
-	  break;
-	case 0xfe:
-	  table = ufe;
-	  size = sizeof(ufe);
-	  break;
-	case 0xff:
-	  table = uff;
-	  size = sizeof(uff);
-	  break;
-	case 0x103:
-	  table = u103;
-	  size = sizeof(u103);
-	  break;
-	case 0x1d0:
-	  table = u1d0;
-	  size = sizeof(u1d0);
-	  break;
-	case 0x1d1:
-	  table = u1d1;
-	  size = sizeof(u1d1);
-	  break;
-	case 0x1d6:
-	  table = u1d6;
-	  size = sizeof(u1d6);
-	  break;
-	case 0x1d7:
-	  table = u1d7;
-	  size = sizeof(u1d7);
-	  break;
-	case 0xe00:
-	  table = ue00;
-	  size = sizeof(ue00);
-	  break;
-	case 0xfff:
-	  table = ufff;
-	  size = sizeof(ufff);
-	  break;
-	case 0x10ff:
-	  table = u10ff;
-	  size = sizeof(u10ff);
-	  break;
-	default:
-	  return 0;
-	}
-      /* we have narrowed down to a section of 256 characters to check */
-      /* now check if c matches the punctuation wide-chars within that section */
-      ptr = (unsigned char *)table;
-      ctmp = (unsigned char)c;
-      while (ptr < table + size)
-	{
-	  if (ctmp == *ptr)
-	    return 1;
-	  if (ctmp < *ptr)
-	    return 0;
-	  /* otherwise c > *ptr */
-	  /* look for 0x0 as next element which indicates a range */
-	  ++ptr;
-	  if (*ptr == 0x0)
-	    {
-	      /* we have a range..see if c falls within range */
-	      ++ptr;
-	      if (ctmp <= *ptr)
-		return 1;
-	      ++ptr;
-	    }
-	}
-      /* not in table */
-      return 0;
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < (wint_t)0x100 ? ispunct (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswspace.c b/newlib/libc/ctype/iswspace.c
deleted file mode 100644
index cd3d85a7c..000000000
--- a/newlib/libc/ctype/iswspace.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<iswspace>>---wide-character space test
-
-INDEX
-	iswspace
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswspace(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswspace(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswspace>> is a function which classifies wide-character values that
-are categorized as white-space.
-
-RETURNS
-<<iswspace>> returns non-zero if <[c]> is a white-space wide-character.
-
-PORTABILITY
-<<iswspace>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-#include <ctype.h>
-#include <string.h>
-#include "local.h"
-
-int
-_DEFUN(iswspace,(c), wint_t c)
-{
-  int unicode = 0;
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      return ((c >= 0x0009 && c <= 0x000d) || c == 0x0020 || c == 0x1680 ||
-              (c >= 0x2000 && c <= 0x2006) ||
-              (c >= 0x2008 && c <= 0x200b) ||
-              c == 0x2028 || c == 0x2029 ||
-              c == 0x205f || c == 0x3000);
-    }
-#endif /* MB_CAPABLE */
-
-  return (c < 0x100 ? isspace (c) : 0);
-}
-
diff --git a/newlib/libc/ctype/iswupper.c b/newlib/libc/ctype/iswupper.c
deleted file mode 100644
index 872475da2..000000000
--- a/newlib/libc/ctype/iswupper.c
+++ /dev/null
@@ -1,38 +0,0 @@
-
-/*
-FUNCTION
-	<<iswupper>>---upper-case wide-character test
-
-INDEX
-	iswupper
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswupper(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswupper(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswupper>> is a function which classifies wide-character values that
-have an upper-case translation.
-
-RETURNS
-<<iswupper>> returns non-zero if <[c]> is a upper-case wide-character.
-
-PORTABILITY
-<<iswupper>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswupper,(c),wint_t c)
-{
-  return (towlower (c) != c);
-}
-
diff --git a/newlib/libc/ctype/iswxdigit.c b/newlib/libc/ctype/iswxdigit.c
deleted file mode 100644
index 73d8fa445..000000000
--- a/newlib/libc/ctype/iswxdigit.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
-FUNCTION
-	<<iswxdigit>>---hexadecimal digit wide-character test
-
-INDEX
-	iswxdigit
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	int iswxdigit(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	int iswxdigit(<[c]>)
-	wint_t <[c]>;
-
-DESCRIPTION
-<<iswxdigit>> is a function which classifies wide-character values that
-are hexadecimal digits.
-
-RETURNS
-<<iswxdigit>> returns non-zero if <[c]> is a hexadecimal digit wide-character.
-
-PORTABILITY
-<<iswxdigit>> is C99.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <wctype.h>
-
-int
-_DEFUN(iswxdigit,(c), wint_t c)
-{
-  return ((c >= (wint_t)'0' && c <= (wint_t)'9') ||
-	  (c >= (wint_t)'a' && c <= (wint_t)'f') ||
-	  (c >= (wint_t)'A' && c <= (wint_t)'F'));
-}
-
diff --git a/newlib/libc/ctype/isxdigit.c b/newlib/libc/ctype/isxdigit.c
deleted file mode 100644
index f8a035f37..000000000
--- a/newlib/libc/ctype/isxdigit.c
+++ /dev/null
@@ -1,45 +0,0 @@
-
-/*
-FUNCTION
-<<isxdigit>>---hexadecimal digit predicate
-
-INDEX
-isxdigit
-
-ANSI_SYNOPSIS
-#include <ctype.h>
-int isxdigit(int <[c]>);
-
-TRAD_SYNOPSIS
-#include <ctype.h>
-int isxdigit(int <[c]>);
-
-DESCRIPTION
-<<isxdigit>> is a macro which classifies ASCII integer values by table
-lookup.  It is a predicate returning non-zero for hexadecimal digits,
-and <<0>> for other characters.  It is defined only when
-<<isascii>>(<[c]>) is true or <[c]> is EOF.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining the macro using `<<#undef isxdigit>>'.
-
-RETURNS
-<<isxdigit>> returns non-zero if <[c]> is a hexadecimal digit
-(<<0>>--<<9>>, <<a>>--<<f>>, or <<A>>--<<F>>).
-
-PORTABILITY
-<<isxdigit>> is ANSI C.
-
-No supporting OS subroutines are required.
-*/
-#include <_ansi.h>
-#include <ctype.h>
-
-
-#undef isxdigit
-int
-_DEFUN(isxdigit,(c),int c)
-{
-	return((_ctype_ + 1)[c] & ((_X)|(_N)));
-}
-
diff --git a/newlib/libc/ctype/jp2uc.c b/newlib/libc/ctype/jp2uc.c
deleted file mode 100644
index 044c76b86..000000000
--- a/newlib/libc/ctype/jp2uc.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Routine to translate from Japanese characters to Unicode */
-
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifdef MB_CAPABLE
-
-#include <_ansi.h>
-#include <wctype.h>
-#include "local.h"
-#include "jp2uc.h"
-
-wint_t
-_DEFUN (__jp2uc, (c, type), wint_t c _AND int type)
-{
-  int index, adj;
-  unsigned char byte1, byte2;
-  wint_t ret;
-
-  /* we actually use tables of EUCJP to Unicode.  For JIS, we simply
-     note that EUCJP is essentially JIS with the top bits on in each
-     byte and translate to EUCJP.  For SJIS, we do a translation to EUCJP before
-     accessing the tables. */
-  switch (type)
-    {
-    case JP_JIS:
-      byte1 = (c >> 8) + 0x80;
-      byte2 = (c & 0xff) + 0x80;
-      break;
-    case JP_EUCJP:
-      byte1 = (c >> 8);
-      byte2 = (c & 0xff);
-      break;
-    case JP_SJIS:
-      byte1 = c >> 8;
-      byte2 = c & 0xff;
-      if (byte2 <= 0x9e)
-        {
-          adj = 0xa1 - 0x22;
-          byte2 = (byte2 - 31) + 0xa1;
-        }
-      else
-        {
-          adj = 0xa1 - 0x21;
-          byte2 = (byte2 - 126) + 0xa1;
-        }
-      if (byte1 <= 0x9f)
-        byte1 = ((byte1 - 112) << 1) + adj;
-      else
-        byte1 = ((byte1 - 176) << 1) + adj;
-      break;
-    default:
-      return WEOF;
-    }
-
-  /* find conversion in jp2uc arrays */
-
-  /* handle larger ranges first */
-  if (byte1 >= 0xb0 && byte1 <= 0xcf && c <= 0xcfd3)
-    {
-      index = (byte1 - 0xb0) * 0xfe + (byte2 - 0xa1);
-      return b02cf[index];
-    }
-  else if (byte1 >= 0xd0 && byte1 <= 0xf4 && c <= 0xf4a6)
-    {
-      index = (byte1 - 0xd0) * 0xfe + (byte2 - 0xa1);
-      return d02f4[index];
-    }
-
-  /* handle smaller ranges here */    
-  switch (byte1)
-    {
-    case 0xA1:
-      return (wint_t)a1[byte2 - 0xa1];
-    case 0xA2:
-      ret = a2[byte2 - 0xa1];
-      if (ret != 0)
-	return (wint_t)ret;
-      break;
-    case 0xA3:
-      if (a3[byte2 - 0xa1])
-	return (wint_t)(0xff00 + (byte2 - 0xa0));
-      break;
-    case 0xA4:
-      if (byte2 <= 0xf3)
-	return (wint_t)(0x3000 + (byte2 - 0x60));
-      break;
-    case 0xA5:
-      if (byte2 <= 0xf6)
-	return (wint_t)(0x3000 + byte2);
-      break;
-    case 0xA6:
-      ret = 0;
-      if (byte2 <= 0xd8)
-	ret = (wint_t)a6[byte2 - 0xa1];
-      if (ret != 0)
-	return ret;
-      break;
-    case 0xA7:
-      ret = 0;
-      if (byte2 <= 0xf1)
-	ret = (wint_t)a7[byte2 - 0xa1];
-      if (ret != 0)
-	return ret;
-      break;
-    case 0xA8:
-      if (byte2 <= 0xc0)
-	return (wint_t)a8[byte2 - 0xa1];
-      break;
-    default:
-      return WEOF;
-    }
-
-  return WEOF; 
-}
-
-#endif /* MB_CAPABLE */
diff --git a/newlib/libc/ctype/jp2uc.h b/newlib/libc/ctype/jp2uc.h
deleted file mode 100644
index 04eb67d29..000000000
--- a/newlib/libc/ctype/jp2uc.h
+++ /dev/null
@@ -1,6849 +0,0 @@
-/* based on eucjp-208A.txt */
-
-/* a1 is contiguous from a1a1 to a1fe */
-static unsigned short a1[] = {
-  0x3000,
-  0x3001,
-  0x3002,
-  0xFF0C,
-  0xFF0E,
-  0x30FB,
-  0xFF1A,
-  0xFF1B,
-  0xFF1F,
-  0xFF01,
-  0x309B,
-  0x309C,
-  0x00B4,
-  0xFF40,
-  0x00A8,
-  0xFF3E,
-  0x203E,
-  0xFF3F,
-  0x30FD,
-  0x30FE,
-  0x309D,
-  0x309E,
-  0x3003,
-  0x4EDD,
-  0x3005,
-  0x3006,
-  0x3007,
-  0x30FC,
-  0x2014,
-  0x2010,
-  0xFF0F,
-  0xFF3C,
-  0x301C,
-  0x2016,
-  0xFF5C,
-  0x2026,
-  0x2025,
-  0x2018,
-  0x2019,
-  0x201C,
-  0x201D,
-  0xFF08,
-  0xFF09,
-  0x3014,
-  0x3015,
-  0xFF3B,
-  0xFF3D,
-  0xFF5B,
-  0xFF5D,
-  0x3008,
-  0x3009,
-  0x300A,
-  0x300B,
-  0x300C,
-  0x300D,
-  0x300E,
-  0x300F,
-  0x3010,
-  0x3011,
-  0xFF0B,
-  0x2212,
-  0x00B1,
-  0x00D7,
-  0x00F7,
-  0xFF1D,
-  0x2260,
-  0xFF1C,
-  0xFF1E,
-  0x2266,
-  0x2267,
-  0x221E,
-  0x2234,
-  0x2642,
-  0x2640,
-  0x00B0,
-  0x2032,
-  0x2033,
-  0x2103,
-  0x00A5,
-  0xFF04,
-  0x00A2,
-  0x00A3,
-  0xFF05,
-  0xFF03,
-  0xFF06,
-  0xFF0A,
-  0xFF20,
-  0x00A7,
-  0x2606,
-  0x2605,
-  0x25CB,
-  0x25CF,
-  0x25CE,
-  0x25C7
-};
-
-/* a2 has a number of holes between a2a1 and a2fe which we fill with 0x0000 */
-static unsigned short a2[] = {
-  0x25C6,
-  0x25A1,
-  0x25A0,
-  0x25B3,
-  0x25B2,
-  0x25BD,
-  0x25BC,
-  0x203B,
-  0x3012,
-  0x2192,
-  0x2190,
-  0x2191,
-  0x2193,
-  0x3013,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x2208,
-  0x220B,
-  0x2286,
-  0x2287,
-  0x2282,
-  0x2283,
-  0x222A,
-  0x2229,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x2227,
-  0x2228,
-  0x00AC,
-  0x21D2,
-  0x21D4,
-  0x2200,
-  0x2203,
-  0x2229,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x2220,
-  0x22A5,
-  0x2312,
-  0x2202,
-  0x2207,
-  0x2261,
-  0x2252,
-  0x226A,
-  0x226B,
-  0x221A,
-  0x223D,
-  0x221D,
-  0x2235,
-  0x222B,
-  0x222C,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x212B,
-  0x2030,
-  0x266F,
-  0x266D,
-  0x266A,
-  0x2020,
-  0x2021,
-  0x00B6,
-  0x222C,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x25EF
-};
-
-
-/* a3a1 to a3fe is mostly contiguous.  Conversion output values are
-   of the form 0xFFxx where xx is (yy - 0xA0) where the input is 0xA3yy */
-static unsigned char a3[] = {
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1,
-  1
-};
-
-/* a4 is contiguous from a4a1 to a4f3 */
-/* transform = 0x30xx where xx = last byte - 0x60 */
-
-/* a5 is contiguous from a5a1 to a5f6 */
-/* transform = 0x30xx where xx = last byte */
-
-/* a6 is mostly contiguous from a6a1 to a6d8 */
-static unsigned short a6[] = {
-  0x0391,
-  0x0392,
-  0x0393,
-  0x0394,
-  0x0395,
-  0x0396,
-  0x0397,
-  0x0398,
-  0x0399,
-  0x039A,
-  0x039B,
-  0x039C,
-  0x039D,
-  0x039E,
-  0x039F,
-  0x03A0,
-  0x03A1,
-  0x03A3,
-  0x03A4,
-  0x03A5,
-  0x03A6,
-  0x03A7,
-  0x03A8,
-  0x03A9,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x03B1,
-  0x03B2,
-  0x03B3,
-  0x03B4,
-  0x03B5,
-  0x03B6,
-  0x03B7,
-  0x03B8,
-  0x03B9,
-  0x03BA,
-  0x03BB,
-  0x03BC,
-  0x03BD,
-  0x03BE,
-  0x03BF,
-  0x03C0,
-  0x03C1,
-  0x03C3,
-  0x03C4,
-  0x03C5,
-  0x03C6,
-  0x03C7,
-  0x03C8,
-  0x03C9
-};
-
-/* a7 is mostly contiguous from a7a1 to a7f1 */
-static unsigned short a7[] = {
-  0x0410,
-  0x0411,
-  0x0412,
-  0x0413,
-  0x0414,
-  0x0415,
-  0x0401,
-  0x0416,
-  0x0417,
-  0x0418,
-  0x0419,
-  0x041A,
-  0x041B,
-  0x041C,
-  0x041D,
-  0x041E,
-  0x041F,
-  0x0420,
-  0x0421,
-  0x0422,
-  0x0423,
-  0x0424,
-  0x0425,
-  0x0426,
-  0x0427,
-  0x0428,
-  0x0429,
-  0x042A,
-  0x042B,
-  0x042C,
-  0x042D,
-  0x042E,
-  0x042F,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0000,
-  0x0430,
-  0x0431,
-  0x0432,
-  0x0433,
-  0x0434,
-  0x0435,
-  0x0451,
-  0x0436,
-  0x0437,
-  0x0438,
-  0x0439,
-  0x043A,
-  0x043B,
-  0x043C,
-  0x043D,
-  0x043E,
-  0x043F,
-  0x0440,
-  0x0441,
-  0x0442,
-  0x0443,
-  0x0444,
-  0x0445,
-  0x0446,
-  0x0447,
-  0x0448,
-  0x0449,
-  0x044A,
-  0x044B,
-  0x044C,
-  0x044D,
-  0x044E,
-  0x044F
-};
-
-/* a8 is contiguous from a8a1 to a8c0 */
-static unsigned short a8[] = {
-  0x2500,
-  0x2502,
-  0x250C,
-  0x2510,
-  0x2518,
-  0x2514,
-  0x251C,
-  0x252C,
-  0x2524,
-  0x2534,
-  0x253C,
-  0x2501,
-  0x2503,
-  0x250F,
-  0x2513,
-  0x251B,
-  0x2517,
-  0x2523,
-  0x2533,
-  0x252B,
-  0x253B,
-  0x254B,
-  0x2520,
-  0x252F,
-  0x2528,
-  0x2537,
-  0x253F,
-  0x251D,
-  0x2530,
-  0x2525,
-  0x2538,
-  0x2542
-};
-
-/* no conversion a9 to af */
-
-/* b0a1 to cfd3 is contiguous except for illegal sequences with 0xfe */
-static unsigned short b02cf[] = {
-  0x4E9C,
-  0x5516,
-  0x5A03,
-  0x963F,
-  0x54C0,
-  0x611B,
-  0x6328,
-  0x59F6,
-  0x9022,
-  0x8475,
-  0x831C,
-  0x7A50,
-  0x60AA,
-  0x63E1,
-  0x6E25,
-  0x65ED,
-  0x8466,
-  0x82A6,
-  0x9BF5,
-  0x6893,
-  0x5727,
-  0x65A1,
-  0x6271,
-  0x5B9B,
-  0x59D0,
-  0x867B,
-  0x98F4,
-  0x7D62,
-  0x7DBE,
-  0x9B8E,
-  0x6216,
-  0x7C9F,
-  0x88B7,
-  0x5B89,
-  0x5EB5,
-  0x6309,
-  0x6697,
-  0x6848,
-  0x95C7,
-  0x978D,
-  0x674F,
-  0x4EE5,
-  0x4F0A,
-  0x4F4D,
-  0x4F9D,
-  0x5049,
-  0x56F2,
-  0x5937,
-  0x59D4,
-  0x5A01,
-  0x5C09,
-  0x60DF,
-  0x610F,
-  0x6170,
-  0x6613,
-  0x6905,
-  0x70BA,
-  0x754F,
-  0x7570,
-  0x79FB,
-  0x7DAD,
-  0x7DEF,
-  0x80C3,
-  0x840E,
-  0x8863,
-  0x8B02,
-  0x9055,
-  0x907A,
-  0x533B,
-  0x4E95,
-  0x4EA5,
-  0x57DF,
-  0x80B2,
-  0x90C1,
-  0x78EF,
-  0x4E00,
-  0x58F1,
-  0x6EA2,
-  0x9038,
-  0x7A32,
-  0x8328,
-  0x828B,
-  0x9C2F,
-  0x5141,
-  0x5370,
-  0x54BD,
-  0x54E1,
-  0x56E0,
-  0x59FB,
-  0x5F15,
-  0x98F2,
-  0x6DEB,
-  0x80E4,
-  0x852D,
-  0x9662,
-  0x9670,
-  0x96A0,
-  0x97FB,
-  0x540B,
-  0x53F3,
-  0x5B87,
-  0x70CF,
-  0x7FBD,
-  0x8FC2,
-  0x96E8,
-  0x536F,
-  0x9D5C,
-  0x7ABA,
-  0x4E11,
-  0x7893,
-  0x81FC,
-  0x6E26,
-  0x5618,
-  0x5504,
-  0x6B1D,
-  0x851A,
-  0x9C3B,
-  0x59E5,
-  0x53A9,
-  0x6D66,
-  0x74DC,
-  0x958F,
-  0x5642,
-  0x4E91,
-  0x904B,
-  0x96F2,
-  0x834F,
-  0x990C,
-  0x53E1,
-  0x55B6,
-  0x5B30,
-  0x5F71,
-  0x6620,
-  0x66F3,
-  0x6804,
-  0x6C38,
-  0x6CF3,
-  0x6D29,
-  0x745B,
-  0x76C8,
-  0x7A4E,
-  0x9834,
-  0x82F1,
-  0x885B,
-  0x8A60,
-  0x92ED,
-  0x6DB2,
-  0x75AB,
-  0x76CA,
-  0x99C5,
-  0x60A6,
-  0x8B01,
-  0x8D8A,
-  0x95B2,
-  0x698E,
-  0x53AD,
-  0x5186,
-  0x5712,
-  0x5830,
-  0x5944,
-  0x5BB4,
-  0x5EF6,
-  0x6028,
-  0x63A9,
-  0x63F4,
-  0x6CBF,
-  0x6F14,
-  0x708E,
-  0x7114,
-  0x7159,
-  0x71D5,
-  0x733F,
-  0x7E01,
-  0x8276,
-  0x82D1,
-  0x8597,
-  0x9060,
-  0x925B,
-  0x9D1B,
-  0x5869,
-  0x65BC,
-  0x6C5A,
-  0x7525,
-  0x51F9,
-  0x592E,
-  0x5965,
-  0x5F80,
-  0x5FDC,
-  0x62BC,
-  0x65FA,
-  0x6A2A,
-  0x6B27,
-  0x6BB4,
-  0x738B,
-  0x7FC1,
-  0x8956,
-  0x9D2C,
-  0x9D0E,
-  0x9EC4,
-  0x5CA1,
-  0x6C96,
-  0x837B,
-  0x5104,
-  0x5C4B,
-  0x61B6,
-  0x81C6,
-  0x6876,
-  0x7261,
-  0x4E59,
-  0x4FFA,
-  0x5378,
-  0x6069,
-  0x6E29,
-  0x7A4F,
-  0x97F3,
-  0x4E0B,
-  0x5316,
-  0x4EEE,
-  0x4F55,
-  0x4F3D,
-  0x4FA1,
-  0x4F73,
-  0x52A0,
-  0x53EF,
-  0x5609,
-  0x590F,
-  0x5AC1,
-  0x5BB6,
-  0x5BE1,
-  0x79D1,
-  0x6687,
-  0x679C,
-  0x67B6,
-  0x6B4C,
-  0x6CB3,
-  0x706B,
-  0x73C2,
-  0x798D,
-  0x79BE,
-  0x7A3C,
-  0x7B87,
-  0x82B1,
-  0x82DB,
-  0x8304,
-  0x8377,
-  0x83EF,
-  0x83D3,
-  0x8766,
-  0x8AB2,
-  0x5629,
-  0x8CA8,
-  0x8FE6,
-  0x904E,
-  0x971E,
-  0x868A,
-  0x4FC4,
-  0x5CE8,
-  0x6211,
-  0x7259,
-  0x753B,
-  0x81E5,
-  0x82BD,
-  0x86FE,
-  0x8CC0,
-  0x96C5,
-  0x9913,
-  0x99D5,
-  0x4ECB,
-  0x4F1A,
-  0x89E3,
-  0x56DE,
-  0x584A,
-  0x58CA,
-  0x5EFB,
-  0x5FEB,
-  0x602A,
-  0x6094,
-  0x6062,
-  0x61D0,
-  0x6212,
-  0x62D0,
-  0x6539,
-  0x9B41,
-  0x6666,
-  0x68B0,
-  0x6D77,
-  0x7070,
-  0x754C,
-  0x7686,
-  0x7D75,
-  0x82A5,
-  0x87F9,
-  0x958B,
-  0x968E,
-  0x8C9D,
-  0x51F1,
-  0x52BE,
-  0x5916,
-  0x54B3,
-  0x5BB3,
-  0x5D16,
-  0x6168,
-  0x6982,
-  0x6DAF,
-  0x788D,
-  0x84CB,
-  0x8857,
-  0x8A72,
-  0x93A7,
-  0x9AB8,
-  0x6D6C,
-  0x99A8,
-  0x86D9,
-  0x57A3,
-  0x67FF,
-  0x86CE,
-  0x920E,
-  0x5283,
-  0x5687,
-  0x5404,
-  0x5ED3,
-  0x62E1,
-  0x64B9,
-  0x683C,
-  0x6838,
-  0x6BBB,
-  0x7372,
-  0x78BA,
-  0x7A6B,
-  0x899A,
-  0x89D2,
-  0x8D6B,
-  0x8F03,
-  0x90ED,
-  0x95A3,
-  0x9694,
-  0x9769,
-  0x5B66,
-  0x5CB3,
-  0x697D,
-  0x984D,
-  0x984E,
-  0x639B,
-  0x7B20,
-  0x6A2B,
-  0x6A7F,
-  0x68B6,
-  0x9C0D,
-  0x6F5F,
-  0x5272,
-  0x559D,
-  0x6070,
-  0x62EC,
-  0x6D3B,
-  0x6E07,
-  0x6ED1,
-  0x845B,
-  0x8910,
-  0x8F44,
-  0x4E14,
-  0x9C39,
-  0x53F6,
-  0x691B,
-  0x6A3A,
-  0x9784,
-  0x682A,
-  0x515C,
-  0x7AC3,
-  0x84B2,
-  0x91DC,
-  0x938C,
-  0x565B,
-  0x9D28,
-  0x6822,
-  0x8305,
-  0x8431,
-  0x7CA5,
-  0x5208,
-  0x82C5,
-  0x74E6,
-  0x4E7E,
-  0x4F83,
-  0x51A0,
-  0x5BD2,
-  0x520A,
-  0x52D8,
-  0x52E7,
-  0x5DFB,
-  0x559A,
-  0x582A,
-  0x59E6,
-  0x5B8C,
-  0x5B98,
-  0x5BDB,
-  0x5E72,
-  0x5E79,
-  0x60A3,
-  0x611F,
-  0x6163,
-  0x61BE,
-  0x63DB,
-  0x6562,
-  0x67D1,
-  0x6853,
-  0x68FA,
-  0x6B3E,
-  0x6B53,
-  0x6C57,
-  0x6F22,
-  0x6F97,
-  0x6F45,
-  0x74B0,
-  0x7518,
-  0x76E3,
-  0x770B,
-  0x7AFF,
-  0x7BA1,
-  0x7C21,
-  0x7DE9,
-  0x7F36,
-  0x7FF0,
-  0x809D,
-  0x8266,
-  0x839E,
-  0x89B3,
-  0x8ACC,
-  0x8CAB,
-  0x9084,
-  0x9451,
-  0x9593,
-  0x9591,
-  0x95A2,
-  0x9665,
-  0x97D3,
-  0x9928,
-  0x8218,
-  0x4E38,
-  0x542B,
-  0x5CB8,
-  0x5DCC,
-  0x73A9,
-  0x764C,
-  0x773C,
-  0x5CA9,
-  0x7FEB,
-  0x8D0B,
-  0x96C1,
-  0x9811,
-  0x9854,
-  0x9858,
-  0x4F01,
-  0x4F0E,
-  0x5371,
-  0x559C,
-  0x5668,
-  0x57FA,
-  0x5947,
-  0x5B09,
-  0x5BC4,
-  0x5C90,
-  0x5E0C,
-  0x5E7E,
-  0x5FCC,
-  0x63EE,
-  0x673A,
-  0x65D7,
-  0x65E2,
-  0x671F,
-  0x68CB,
-  0x68C4,
-  0x6A5F,
-  0x5E30,
-  0x6BC5,
-  0x6C17,
-  0x6C7D,
-  0x757F,
-  0x7948,
-  0x5B63,
-  0x7A00,
-  0x7D00,
-  0x5FBD,
-  0x898F,
-  0x8A18,
-  0x8CB4,
-  0x8D77,
-  0x8ECC,
-  0x8F1D,
-  0x98E2,
-  0x9A0E,
-  0x9B3C,
-  0x4E80,
-  0x507D,
-  0x5100,
-  0x5993,
-  0x5B9C,
-  0x622F,
-  0x6280,
-  0x64EC,
-  0x6B3A,
-  0x72A0,
-  0x7591,
-  0x7947,
-  0x7FA9,
-  0x87FB,
-  0x8ABC,
-  0x8B70,
-  0x63AC,
-  0x83CA,
-  0x97A0,
-  0x5409,
-  0x5403,
-  0x55AB,
-  0x6854,
-  0x6A58,
-  0x8A70,
-  0x7827,
-  0x6775,
-  0x9ECD,
-  0x5374,
-  0x5BA2,
-  0x811A,
-  0x8650,
-  0x9006,
-  0x4E18,
-  0x4E45,
-  0x4EC7,
-  0x4F11,
-  0x53CA,
-  0x5438,
-  0x5BAE,
-  0x5F13,
-  0x6025,
-  0x6551,
-  0x673D,
-  0x6C42,
-  0x6C72,
-  0x6CE3,
-  0x7078,
-  0x7403,
-  0x7A76,
-  0x7AAE,
-  0x7B08,
-  0x7D1A,
-  0x7CFE,
-  0x7D66,
-  0x65E7,
-  0x725B,
-  0x53BB,
-  0x5C45,
-  0x5DE8,
-  0x62D2,
-  0x62E0,
-  0x6319,
-  0x6E20,
-  0x865A,
-  0x8A31,
-  0x8DDD,
-  0x92F8,
-  0x6F01,
-  0x79A6,
-  0x9B5A,
-  0x4EA8,
-  0x4EAB,
-  0x4EAC,
-  0x4F9B,
-  0x4FA0,
-  0x50D1,
-  0x5147,
-  0x7AF6,
-  0x5171,
-  0x51F6,
-  0x5354,
-  0x5321,
-  0x537F,
-  0x53EB,
-  0x55AC,
-  0x5883,
-  0x5CE1,
-  0x5F37,
-  0x5F4A,
-  0x602F,
-  0x6050,
-  0x606D,
-  0x631F,
-  0x6559,
-  0x6A4B,
-  0x6CC1,
-  0x72C2,
-  0x72ED,
-  0x77EF,
-  0x80F8,
-  0x8105,
-  0x8208,
-  0x854E,
-  0x90F7,
-  0x93E1,
-  0x97FF,
-  0x9957,
-  0x9A5A,
-  0x4EF0,
-  0x51DD,
-  0x5C2D,
-  0x6681,
-  0x696D,
-  0x5C40,
-  0x66F2,
-  0x6975,
-  0x7389,
-  0x6850,
-  0x7C81,
-  0x50C5,
-  0x52E4,
-  0x5747,
-  0x5DFE,
-  0x9326,
-  0x65A4,
-  0x6B23,
-  0x6B3D,
-  0x7434,
-  0x7981,
-  0x79BD,
-  0x7B4B,
-  0x7DCA,
-  0x82B9,
-  0x83CC,
-  0x887F,
-  0x895F,
-  0x8B39,
-  0x8FD1,
-  0x91D1,
-  0x541F,
-  0x9280,
-  0x4E5D,
-  0x5036,
-  0x53E5,
-  0x533A,
-  0x72D7,
-  0x7396,
-  0x77E9,
-  0x82E6,
-  0x8EAF,
-  0x99C6,
-  0x99C8,
-  0x99D2,
-  0x5177,
-  0x611A,
-  0x865E,
-  0x55B0,
-  0x7A7A,
-  0x5076,
-  0x5BD3,
-  0x9047,
-  0x9685,
-  0x4E32,
-  0x6ADB,
-  0x91E7,
-  0x5C51,
-  0x5C48,
-  0x6398,
-  0x7A9F,
-  0x6C93,
-  0x9774,
-  0x8F61,
-  0x7AAA,
-  0x718A,
-  0x9688,
-  0x7C82,
-  0x6817,
-  0x7E70,
-  0x6851,
-  0x936C,
-  0x52F2,
-  0x541B,
-  0x85AB,
-  0x8A13,
-  0x7FA4,
-  0x8ECD,
-  0x90E1,
-  0x5366,
-  0x8888,
-  0x7941,
-  0x4FC2,
-  0x50BE,
-  0x5211,
-  0x5144,
-  0x5553,
-  0x572D,
-  0x73EA,
-  0x578B,
-  0x5951,
-  0x5F62,
-  0x5F84,
-  0x6075,
-  0x6176,
-  0x6167,
-  0x61A9,
-  0x63B2,
-  0x643A,
-  0x656C,
-  0x666F,
-  0x6842,
-  0x6E13,
-  0x7566,
-  0x7A3D,
-  0x7CFB,
-  0x7D4C,
-  0x7D99,
-  0x7E4B,
-  0x7F6B,
-  0x830E,
-  0x834A,
-  0x86CD,
-  0x8A08,
-  0x8A63,
-  0x8B66,
-  0x8EFD,
-  0x981A,
-  0x9D8F,
-  0x82B8,
-  0x8FCE,
-  0x9BE8,
-  0x5287,
-  0x621F,
-  0x6483,
-  0x6FC0,
-  0x9699,
-  0x6841,
-  0x5091,
-  0x6B20,
-  0x6C7A,
-  0x6F54,
-  0x7A74,
-  0x7D50,
-  0x8840,
-  0x8A23,
-  0x6708,
-  0x4EF6,
-  0x5039,
-  0x5026,
-  0x5065,
-  0x517C,
-  0x5238,
-  0x5263,
-  0x55A7,
-  0x570F,
-  0x5805,
-  0x5ACC,
-  0x5EFA,
-  0x61B2,
-  0x61F8,
-  0x62F3,
-  0x6372,
-  0x691C,
-  0x6A29,
-  0x727D,
-  0x72AC,
-  0x732E,
-  0x7814,
-  0x786F,
-  0x7D79,
-  0x770C,
-  0x80A9,
-  0x898B,
-  0x8B19,
-  0x8CE2,
-  0x8ED2,
-  0x9063,
-  0x9375,
-  0x967A,
-  0x9855,
-  0x9A13,
-  0x9E78,
-  0x5143,
-  0x539F,
-  0x53B3,
-  0x5E7B,
-  0x5F26,
-  0x6E1B,
-  0x6E90,
-  0x7384,
-  0x73FE,
-  0x7D43,
-  0x8237,
-  0x8A00,
-  0x8AFA,
-  0x9650,
-  0x4E4E,
-  0x500B,
-  0x53E4,
-  0x547C,
-  0x56FA,
-  0x59D1,
-  0x5B64,
-  0x5DF1,
-  0x5EAB,
-  0x5F27,
-  0x6238,
-  0x6545,
-  0x67AF,
-  0x6E56,
-  0x72D0,
-  0x7CCA,
-  0x88B4,
-  0x80A1,
-  0x80E1,
-  0x83F0,
-  0x864E,
-  0x8A87,
-  0x8DE8,
-  0x9237,
-  0x96C7,
-  0x9867,
-  0x9F13,
-  0x4E94,
-  0x4E92,
-  0x4F0D,
-  0x5348,
-  0x5449,
-  0x543E,
-  0x5A2F,
-  0x5F8C,
-  0x5FA1,
-  0x609F,
-  0x68A7,
-  0x6A8E,
-  0x745A,
-  0x7881,
-  0x8A9E,
-  0x8AA4,
-  0x8B77,
-  0x9190,
-  0x4E5E,
-  0x9BC9,
-  0x4EA4,
-  0x4F7C,
-  0x4FAF,
-  0x5019,
-  0x5016,
-  0x5149,
-  0x516C,
-  0x529F,
-  0x52B9,
-  0x52FE,
-  0x539A,
-  0x53E3,
-  0x5411,
-  0x540E,
-  0x5589,
-  0x5751,
-  0x57A2,
-  0x597D,
-  0x5B54,
-  0x5B5D,
-  0x5B8F,
-  0x5DE5,
-  0x5DE7,
-  0x5DF7,
-  0x5E78,
-  0x5E83,
-  0x5E9A,
-  0x5EB7,
-  0x5F18,
-  0x6052,
-  0x614C,
-  0x6297,
-  0x62D8,
-  0x63A7,
-  0x653B,
-  0x6602,
-  0x6643,
-  0x66F4,
-  0x676D,
-  0x6821,
-  0x6897,
-  0x69CB,
-  0x6C5F,
-  0x6D2A,
-  0x6D69,
-  0x6E2F,
-  0x6E9D,
-  0x7532,
-  0x7687,
-  0x786C,
-  0x7A3F,
-  0x7CE0,
-  0x7D05,
-  0x7D18,
-  0x7D5E,
-  0x7DB1,
-  0x8015,
-  0x8003,
-  0x80AF,
-  0x80B1,
-  0x8154,
-  0x818F,
-  0x822A,
-  0x8352,
-  0x884C,
-  0x8861,
-  0x8B1B,
-  0x8CA2,
-  0x8CFC,
-  0x90CA,
-  0x9175,
-  0x9271,
-  0x783F,
-  0x92FC,
-  0x95A4,
-  0x964D,
-  0x9805,
-  0x9999,
-  0x9AD8,
-  0x9D3B,
-  0x525B,
-  0x52AB,
-  0x53F7,
-  0x5408,
-  0x58D5,
-  0x62F7,
-  0x6FE0,
-  0x8C6A,
-  0x8F5F,
-  0x9EB9,
-  0x514B,
-  0x523B,
-  0x544A,
-  0x56FD,
-  0x7A40,
-  0x9177,
-  0x9D60,
-  0x9ED2,
-  0x7344,
-  0x6F09,
-  0x8170,
-  0x7511,
-  0x5FFD,
-  0x60DA,
-  0x9AA8,
-  0x72DB,
-  0x8FBC,
-  0x6B64,
-  0x9803,
-  0x4ECA,
-  0x56F0,
-  0x5764,
-  0x58BE,
-  0x5A5A,
-  0x6068,
-  0x61C7,
-  0x660F,
-  0x6606,
-  0x6839,
-  0x68B1,
-  0x6DF7,
-  0x75D5,
-  0x7D3A,
-  0x826E,
-  0x9B42,
-  0x4E9B,
-  0x4F50,
-  0x53C9,
-  0x5506,
-  0x5D6F,
-  0x5DE6,
-  0x5DEE,
-  0x67FB,
-  0x6C99,
-  0x7473,
-  0x7802,
-  0x8A50,
-  0x9396,
-  0x88DF,
-  0x5750,
-  0x5EA7,
-  0x632B,
-  0x50B5,
-  0x50AC,
-  0x518D,
-  0x6700,
-  0x54C9,
-  0x585E,
-  0x59BB,
-  0x5BB0,
-  0x5F69,
-  0x624D,
-  0x63A1,
-  0x683D,
-  0x6B73,
-  0x6E08,
-  0x707D,
-  0x91C7,
-  0x7280,
-  0x7815,
-  0x7826,
-  0x796D,
-  0x658E,
-  0x7D30,
-  0x83DC,
-  0x88C1,
-  0x8F09,
-  0x969B,
-  0x5264,
-  0x5728,
-  0x6750,
-  0x7F6A,
-  0x8CA1,
-  0x51B4,
-  0x5742,
-  0x962A,
-  0x583A,
-  0x698A,
-  0x80B4,
-  0x54B2,
-  0x5D0E,
-  0x57FC,
-  0x7895,
-  0x9DFA,
-  0x4F5C,
-  0x524A,
-  0x548B,
-  0x643E,
-  0x6628,
-  0x6714,
-  0x67F5,
-  0x7A84,
-  0x7B56,
-  0x7D22,
-  0x932F,
-  0x685C,
-  0x9BAD,
-  0x7B39,
-  0x5319,
-  0x518A,
-  0x5237,
-  0x5BDF,
-  0x62F6,
-  0x64AE,
-  0x64E6,
-  0x672D,
-  0x6BBA,
-  0x85A9,
-  0x96D1,
-  0x7690,
-  0x9BD6,
-  0x634C,
-  0x9306,
-  0x9BAB,
-  0x76BF,
-  0x6652,
-  0x4E09,
-  0x5098,
-  0x53C2,
-  0x5C71,
-  0x60E8,
-  0x6492,
-  0x6563,
-  0x685F,
-  0x71E6,
-  0x73CA,
-  0x7523,
-  0x7B97,
-  0x7E82,
-  0x8695,
-  0x8B83,
-  0x8CDB,
-  0x9178,
-  0x9910,
-  0x65AC,
-  0x66AB,
-  0x6B8B,
-  0x4ED5,
-  0x4ED4,
-  0x4F3A,
-  0x4F7F,
-  0x523A,
-  0x53F8,
-  0x53F2,
-  0x55E3,
-  0x56DB,
-  0x58EB,
-  0x59CB,
-  0x59C9,
-  0x59FF,
-  0x5B50,
-  0x5C4D,
-  0x5E02,
-  0x5E2B,
-  0x5FD7,
-  0x601D,
-  0x6307,
-  0x652F,
-  0x5B5C,
-  0x65AF,
-  0x65BD,
-  0x65E8,
-  0x679D,
-  0x6B62,
-  0x6B7B,
-  0x6C0F,
-  0x7345,
-  0x7949,
-  0x79C1,
-  0x7CF8,
-  0x7D19,
-  0x7D2B,
-  0x80A2,
-  0x8102,
-  0x81F3,
-  0x8996,
-  0x8A5E,
-  0x8A69,
-  0x8A66,
-  0x8A8C,
-  0x8AEE,
-  0x8CC7,
-  0x8CDC,
-  0x96CC,
-  0x98FC,
-  0x6B6F,
-  0x4E8B,
-  0x4F3C,
-  0x4F8D,
-  0x5150,
-  0x5B57,
-  0x5BFA,
-  0x6148,
-  0x6301,
-  0x6642,
-  0x6B21,
-  0x6ECB,
-  0x6CBB,
-  0x723E,
-  0x74BD,
-  0x75D4,
-  0x78C1,
-  0x793A,
-  0x800C,
-  0x8033,
-  0x81EA,
-  0x8494,
-  0x8F9E,
-  0x6C50,
-  0x9E7F,
-  0x5F0F,
-  0x8B58,
-  0x9D2B,
-  0x7AFA,
-  0x8EF8,
-  0x5B8D,
-  0x96EB,
-  0x4E03,
-  0x53F1,
-  0x57F7,
-  0x5931,
-  0x5AC9,
-  0x5BA4,
-  0x6089,
-  0x6E7F,
-  0x6F06,
-  0x75BE,
-  0x8CEA,
-  0x5B9F,
-  0x8500,
-  0x7BE0,
-  0x5072,
-  0x67F4,
-  0x829D,
-  0x5C61,
-  0x854A,
-  0x7E1E,
-  0x820E,
-  0x5199,
-  0x5C04,
-  0x6368,
-  0x8D66,
-  0x659C,
-  0x716E,
-  0x793E,
-  0x7D17,
-  0x8005,
-  0x8B1D,
-  0x8ECA,
-  0x906E,
-  0x86C7,
-  0x90AA,
-  0x501F,
-  0x52FA,
-  0x5C3A,
-  0x6753,
-  0x707C,
-  0x7235,
-  0x914C,
-  0x91C8,
-  0x932B,
-  0x82E5,
-  0x5BC2,
-  0x5F31,
-  0x60F9,
-  0x4E3B,
-  0x53D6,
-  0x5B88,
-  0x624B,
-  0x6731,
-  0x6B8A,
-  0x72E9,
-  0x73E0,
-  0x7A2E,
-  0x816B,
-  0x8DA3,
-  0x9152,
-  0x9996,
-  0x5112,
-  0x53D7,
-  0x546A,
-  0x5BFF,
-  0x6388,
-  0x6A39,
-  0x7DAC,
-  0x9700,
-  0x56DA,
-  0x53CE,
-  0x5468,
-  0x5B97,
-  0x5C31,
-  0x5DDE,
-  0x4FEE,
-  0x6101,
-  0x62FE,
-  0x6D32,
-  0x79C0,
-  0x79CB,
-  0x7D42,
-  0x7E4D,
-  0x7FD2,
-  0x81ED,
-  0x821F,
-  0x8490,
-  0x8846,
-  0x8972,
-  0x8B90,
-  0x8E74,
-  0x8F2F,
-  0x9031,
-  0x914B,
-  0x916C,
-  0x96C6,
-  0x919C,
-  0x4EC0,
-  0x4F4F,
-  0x5145,
-  0x5341,
-  0x5F93,
-  0x620E,
-  0x67D4,
-  0x6C41,
-  0x6E0B,
-  0x7363,
-  0x7E26,
-  0x91CD,
-  0x9283,
-  0x53D4,
-  0x5919,
-  0x5BBF,
-  0x6DD1,
-  0x795D,
-  0x7E2E,
-  0x7C9B,
-  0x587E,
-  0x719F,
-  0x51FA,
-  0x8853,
-  0x8FF0,
-  0x4FCA,
-  0x5CFB,
-  0x6625,
-  0x77AC,
-  0x7AE3,
-  0x821C,
-  0x99FF,
-  0x51C6,
-  0x5FAA,
-  0x65EC,
-  0x696F,
-  0x6B89,
-  0x6DF3,
-  0x6E96,
-  0x6F64,
-  0x76FE,
-  0x7D14,
-  0x5DE1,
-  0x9075,
-  0x9187,
-  0x9806,
-  0x51E6,
-  0x521D,
-  0x6240,
-  0x6691,
-  0x66D9,
-  0x6E1A,
-  0x5EB6,
-  0x7DD2,
-  0x7F72,
-  0x66F8,
-  0x85AF,
-  0x85F7,
-  0x8AF8,
-  0x52A9,
-  0x53D9,
-  0x5973,
-  0x5E8F,
-  0x5F90,
-  0x6055,
-  0x92E4,
-  0x9664,
-  0x50B7,
-  0x511F,
-  0x52DD,
-  0x5320,
-  0x5347,
-  0x53EC,
-  0x54E8,
-  0x5546,
-  0x5531,
-  0x5617,
-  0x5968,
-  0x59BE,
-  0x5A3C,
-  0x5BB5,
-  0x5C06,
-  0x5C0F,
-  0x5C11,
-  0x5C1A,
-  0x5E84,
-  0x5E8A,
-  0x5EE0,
-  0x5F70,
-  0x627F,
-  0x6284,
-  0x62DB,
-  0x638C,
-  0x6377,
-  0x6607,
-  0x660C,
-  0x662D,
-  0x6676,
-  0x677E,
-  0x68A2,
-  0x6A1F,
-  0x6A35,
-  0x6CBC,
-  0x6D88,
-  0x6E09,
-  0x6E58,
-  0x713C,
-  0x7126,
-  0x7167,
-  0x75C7,
-  0x7701,
-  0x785D,
-  0x7901,
-  0x7965,
-  0x79F0,
-  0x7AE0,
-  0x7B11,
-  0x7CA7,
-  0x7D39,
-  0x8096,
-  0x83D6,
-  0x848B,
-  0x8549,
-  0x885D,
-  0x88F3,
-  0x8A1F,
-  0x8A3C,
-  0x8A54,
-  0x8A73,
-  0x8C61,
-  0x8CDE,
-  0x91A4,
-  0x9266,
-  0x937E,
-  0x9418,
-  0x969C,
-  0x9798,
-  0x4E0A,
-  0x4E08,
-  0x4E1E,
-  0x4E57,
-  0x5197,
-  0x5270,
-  0x57CE,
-  0x5834,
-  0x58CC,
-  0x5B22,
-  0x5E38,
-  0x60C5,
-  0x64FE,
-  0x6761,
-  0x6756,
-  0x6D44,
-  0x72B6,
-  0x7573,
-  0x7A63,
-  0x84B8,
-  0x8B72,
-  0x91B8,
-  0x9320,
-  0x5631,
-  0x57F4,
-  0x98FE,
-  0x62ED,
-  0x690D,
-  0x6B96,
-  0x71ED,
-  0x7E54,
-  0x8077,
-  0x8272,
-  0x89E6,
-  0x98DF,
-  0x8755,
-  0x8FB1,
-  0x5C3B,
-  0x4F38,
-  0x4FE1,
-  0x4FB5,
-  0x5507,
-  0x5A20,
-  0x5BDD,
-  0x5BE9,
-  0x5FC3,
-  0x614E,
-  0x632F,
-  0x65B0,
-  0x664B,
-  0x68EE,
-  0x699B,
-  0x6D78,
-  0x6DF1,
-  0x7533,
-  0x75B9,
-  0x771F,
-  0x795E,
-  0x79E6,
-  0x7D33,
-  0x81E3,
-  0x82AF,
-  0x85AA,
-  0x89AA,
-  0x8A3A,
-  0x8EAB,
-  0x8F9B,
-  0x9032,
-  0x91DD,
-  0x9707,
-  0x4EBA,
-  0x4EC1,
-  0x5203,
-  0x5875,
-  0x58EC,
-  0x5C0B,
-  0x751A,
-  0x5C3D,
-  0x814E,
-  0x8A0A,
-  0x8FC5,
-  0x9663,
-  0x976D,
-  0x7B25,
-  0x8ACF,
-  0x9808,
-  0x9162,
-  0x56F3,
-  0x53A8,
-  0x9017,
-  0x5439,
-  0x5782,
-  0x5E25,
-  0x63A8,
-  0x6C34,
-  0x708A,
-  0x7761,
-  0x7C8B,
-  0x7FE0,
-  0x8870,
-  0x9042,
-  0x9154,
-  0x9310,
-  0x9318,
-  0x968F,
-  0x745E,
-  0x9AC4,
-  0x5D07,
-  0x5D69,
-  0x6570,
-  0x67A2,
-  0x8DA8,
-  0x96DB,
-  0x636E,
-  0x6749,
-  0x6919,
-  0x83C5,
-  0x9817,
-  0x96C0,
-  0x88FE,
-  0x6F84,
-  0x647A,
-  0x5BF8,
-  0x4E16,
-  0x702C,
-  0x755D,
-  0x662F,
-  0x51C4,
-  0x5236,
-  0x52E2,
-  0x59D3,
-  0x5F81,
-  0x6027,
-  0x6210,
-  0x653F,
-  0x6574,
-  0x661F,
-  0x6674,
-  0x68F2,
-  0x6816,
-  0x6B63,
-  0x6E05,
-  0x7272,
-  0x751F,
-  0x76DB,
-  0x7CBE,
-  0x8056,
-  0x58F0,
-  0x88FD,
-  0x897F,
-  0x8AA0,
-  0x8A93,
-  0x8ACB,
-  0x901D,
-  0x9192,
-  0x9752,
-  0x9759,
-  0x6589,
-  0x7A0E,
-  0x8106,
-  0x96BB,
-  0x5E2D,
-  0x60DC,
-  0x621A,
-  0x65A5,
-  0x6614,
-  0x6790,
-  0x77F3,
-  0x7A4D,
-  0x7C4D,
-  0x7E3E,
-  0x810A,
-  0x8CAC,
-  0x8D64,
-  0x8DE1,
-  0x8E5F,
-  0x78A9,
-  0x5207,
-  0x62D9,
-  0x63A5,
-  0x6442,
-  0x6298,
-  0x8A2D,
-  0x7A83,
-  0x7BC0,
-  0x8AAC,
-  0x96EA,
-  0x7D76,
-  0x820C,
-  0x8749,
-  0x4ED9,
-  0x5148,
-  0x5343,
-  0x5360,
-  0x5BA3,
-  0x5C02,
-  0x5C16,
-  0x5DDD,
-  0x6226,
-  0x6247,
-  0x64B0,
-  0x6813,
-  0x6834,
-  0x6CC9,
-  0x6D45,
-  0x6D17,
-  0x67D3,
-  0x6F5C,
-  0x714E,
-  0x717D,
-  0x65CB,
-  0x7A7F,
-  0x7BAD,
-  0x7DDA,
-  0x7E4A,
-  0x7FA8,
-  0x817A,
-  0x821B,
-  0x8239,
-  0x85A6,
-  0x8A6E,
-  0x8CCE,
-  0x8DF5,
-  0x9078,
-  0x9077,
-  0x92AD,
-  0x9291,
-  0x9583,
-  0x9BAE,
-  0x524D,
-  0x5584,
-  0x6F38,
-  0x7136,
-  0x5168,
-  0x7985,
-  0x7E55,
-  0x81B3,
-  0x7CCE,
-  0x564C,
-  0x5851,
-  0x5CA8,
-  0x63AA,
-  0x66FE,
-  0x66FD,
-  0x695A,
-  0x72D9,
-  0x758F,
-  0x758E,
-  0x790E,
-  0x7956,
-  0x79DF,
-  0x7C97,
-  0x7D20,
-  0x7D44,
-  0x8607,
-  0x8A34,
-  0x963B,
-  0x9061,
-  0x9F20,
-  0x50E7,
-  0x5275,
-  0x53CC,
-  0x53E2,
-  0x5009,
-  0x55AA,
-  0x58EE,
-  0x594F,
-  0x723D,
-  0x5B8B,
-  0x5C64,
-  0x531D,
-  0x60E3,
-  0x60F3,
-  0x635C,
-  0x6383,
-  0x633F,
-  0x63BB,
-  0x64CD,
-  0x65E9,
-  0x66F9,
-  0x5DE3,
-  0x69CD,
-  0x69FD,
-  0x6F15,
-  0x71E5,
-  0x4E89,
-  0x75E9,
-  0x76F8,
-  0x7A93,
-  0x7CDF,
-  0x7DCF,
-  0x7D9C,
-  0x8061,
-  0x8349,
-  0x8358,
-  0x846C,
-  0x84BC,
-  0x85FB,
-  0x88C5,
-  0x8D70,
-  0x9001,
-  0x906D,
-  0x9397,
-  0x971C,
-  0x9A12,
-  0x50CF,
-  0x5897,
-  0x618E,
-  0x81D3,
-  0x8535,
-  0x8D08,
-  0x9020,
-  0x4FC3,
-  0x5074,
-  0x5247,
-  0x5373,
-  0x606F,
-  0x6349,
-  0x675F,
-  0x6E2C,
-  0x8DB3,
-  0x901F,
-  0x4FD7,
-  0x5C5E,
-  0x8CCA,
-  0x65CF,
-  0x7D9A,
-  0x5352,
-  0x8896,
-  0x5176,
-  0x63C3,
-  0x5B58,
-  0x5B6B,
-  0x5C0A,
-  0x640D,
-  0x6751,
-  0x905C,
-  0x4ED6,
-  0x591A,
-  0x592A,
-  0x6C70,
-  0x8A51,
-  0x553E,
-  0x5815,
-  0x59A5,
-  0x60F0,
-  0x6253,
-  0x67C1,
-  0x8235,
-  0x6955,
-  0x9640,
-  0x99C4,
-  0x9A28,
-  0x4F53,
-  0x5806,
-  0x5BFE,
-  0x8010,
-  0x5CB1,
-  0x5E2F,
-  0x5F85,
-  0x6020,
-  0x614B,
-  0x6234,
-  0x66FF,
-  0x6CF0,
-  0x6EDE,
-  0x80CE,
-  0x817F,
-  0x82D4,
-  0x888B,
-  0x8CB8,
-  0x9000,
-  0x902E,
-  0x968A,
-  0x9EDB,
-  0x9BDB,
-  0x4EE3,
-  0x53F0,
-  0x5927,
-  0x7B2C,
-  0x918D,
-  0x984C,
-  0x9DF9,
-  0x6EDD,
-  0x7027,
-  0x5353,
-  0x5544,
-  0x5B85,
-  0x6258,
-  0x629E,
-  0x62D3,
-  0x6CA2,
-  0x6FEF,
-  0x7422,
-  0x8A17,
-  0x9438,
-  0x6FC1,
-  0x8AFE,
-  0x8338,
-  0x51E7,
-  0x86F8,
-  0x53EA,
-  0x53E9,
-  0x4F46,
-  0x9054,
-  0x8FB0,
-  0x596A,
-  0x8131,
-  0x5DFD,
-  0x7AEA,
-  0x8FBF,
-  0x68DA,
-  0x8C37,
-  0x72F8,
-  0x9C48,
-  0x6A3D,
-  0x8AB0,
-  0x4E39,
-  0x5358,
-  0x5606,
-  0x5766,
-  0x62C5,
-  0x63A2,
-  0x65E6,
-  0x6B4E,
-  0x6DE1,
-  0x6E5B,
-  0x70AD,
-  0x77ED,
-  0x7AEF,
-  0x7BAA,
-  0x7DBB,
-  0x803D,
-  0x80C6,
-  0x86CB,
-  0x8A95,
-  0x935B,
-  0x56E3,
-  0x58C7,
-  0x5F3E,
-  0x65AD,
-  0x6696,
-  0x6A80,
-  0x6BB5,
-  0x7537,
-  0x8AC7,
-  0x5024,
-  0x77E5,
-  0x5730,
-  0x5F1B,
-  0x6065,
-  0x667A,
-  0x6C60,
-  0x75F4,
-  0x7A1A,
-  0x7F6E,
-  0x81F4,
-  0x8718,
-  0x9045,
-  0x99B3,
-  0x7BC9,
-  0x755C,
-  0x7AF9,
-  0x7B51,
-  0x84C4,
-  0x9010,
-  0x79E9,
-  0x7A92,
-  0x8336,
-  0x5AE1,
-  0x7740,
-  0x4E2D,
-  0x4EF2,
-  0x5B99,
-  0x5FE0,
-  0x62BD,
-  0x663C,
-  0x67F1,
-  0x6CE8,
-  0x866B,
-  0x8877,
-  0x8A3B,
-  0x914E,
-  0x92F3,
-  0x99D0,
-  0x6A17,
-  0x7026,
-  0x732A,
-  0x82E7,
-  0x8457,
-  0x8CAF,
-  0x4E01,
-  0x5146,
-  0x51CB,
-  0x558B,
-  0x5BF5,
-  0x5E16,
-  0x5E33,
-  0x5E81,
-  0x5F14,
-  0x5F35,
-  0x5F6B,
-  0x5FB4,
-  0x61F2,
-  0x6311,
-  0x66A2,
-  0x671D,
-  0x6F6E,
-  0x7252,
-  0x753A,
-  0x773A,
-  0x8074,
-  0x8139,
-  0x8178,
-  0x8776,
-  0x8ABF,
-  0x8ADC,
-  0x8D85,
-  0x8DF3,
-  0x929A,
-  0x9577,
-  0x9802,
-  0x9CE5,
-  0x52C5,
-  0x6357,
-  0x76F4,
-  0x6715,
-  0x6C88,
-  0x73CD,
-  0x8CC3,
-  0x93AE,
-  0x9673,
-  0x6D25,
-  0x589C,
-  0x690E,
-  0x69CC,
-  0x8FFD,
-  0x939A,
-  0x75DB,
-  0x901A,
-  0x585A,
-  0x6802,
-  0x63B4,
-  0x69FB,
-  0x4F43,
-  0x6F2C,
-  0x67D8,
-  0x8FBB,
-  0x8526,
-  0x7DB4,
-  0x9354,
-  0x693F,
-  0x6F70,
-  0x576A,
-  0x58F7,
-  0x5B2C,
-  0x7D2C,
-  0x722A,
-  0x540A,
-  0x91E3,
-  0x9DB4,
-  0x4EAD,
-  0x4F4E,
-  0x505C,
-  0x5075,
-  0x5243,
-  0x8C9E,
-  0x5448,
-  0x5824,
-  0x5B9A,
-  0x5E1D,
-  0x5E95,
-  0x5EAD,
-  0x5EF7,
-  0x5F1F,
-  0x608C,
-  0x62B5,
-  0x633A,
-  0x63D0,
-  0x68AF,
-  0x6C40,
-  0x7887,
-  0x798E,
-  0x7A0B,
-  0x7DE0,
-  0x8247,
-  0x8A02,
-  0x8AE6,
-  0x8E44,
-  0x9013,
-  0x90B8,
-  0x912D,
-  0x91D8,
-  0x9F0E,
-  0x6CE5,
-  0x6458,
-  0x64E2,
-  0x6575,
-  0x6EF4,
-  0x7684,
-  0x7B1B,
-  0x9069,
-  0x93D1,
-  0x6EBA,
-  0x54F2,
-  0x5FB9,
-  0x64A4,
-  0x8F4D,
-  0x8FED,
-  0x9244,
-  0x5178,
-  0x586B,
-  0x5929,
-  0x5C55,
-  0x5E97,
-  0x6DFB,
-  0x7E8F,
-  0x751C,
-  0x8CBC,
-  0x8EE2,
-  0x985B,
-  0x70B9,
-  0x4F1D,
-  0x6BBF,
-  0x6FB1,
-  0x7530,
-  0x96FB,
-  0x514E,
-  0x5410,
-  0x5835,
-  0x5857,
-  0x59AC,
-  0x5C60,
-  0x5F92,
-  0x6597,
-  0x675C,
-  0x6E21,
-  0x767B,
-  0x83DF,
-  0x8CED,
-  0x9014,
-  0x90FD,
-  0x934D,
-  0x7825,
-  0x783A,
-  0x52AA,
-  0x5EA6,
-  0x571F,
-  0x5974,
-  0x6012,
-  0x5012,
-  0x515A,
-  0x51AC,
-  0x51CD,
-  0x5200,
-  0x5510,
-  0x5854,
-  0x5858,
-  0x5957,
-  0x5B95,
-  0x5CF6,
-  0x5D8B,
-  0x60BC,
-  0x6295,
-  0x642D,
-  0x6771,
-  0x6843,
-  0x68BC,
-  0x68DF,
-  0x76D7,
-  0x6DD8,
-  0x6E6F,
-  0x6D9B,
-  0x706F,
-  0x71C8,
-  0x5F53,
-  0x75D8,
-  0x7977,
-  0x7B49,
-  0x7B54,
-  0x7B52,
-  0x7CD6,
-  0x7D71,
-  0x5230,
-  0x8463,
-  0x8569,
-  0x85E4,
-  0x8A0E,
-  0x8B04,
-  0x8C46,
-  0x8E0F,
-  0x9003,
-  0x900F,
-  0x9419,
-  0x9676,
-  0x982D,
-  0x9A30,
-  0x95D8,
-  0x50CD,
-  0x52D5,
-  0x540C,
-  0x5802,
-  0x5C0E,
-  0x61A7,
-  0x649E,
-  0x6D1E,
-  0x77B3,
-  0x7AE5,
-  0x80F4,
-  0x8404,
-  0x9053,
-  0x9285,
-  0x5CE0,
-  0x9D07,
-  0x533F,
-  0x5F97,
-  0x5FB3,
-  0x6D9C,
-  0x7279,
-  0x7763,
-  0x79BF,
-  0x7BE4,
-  0x6BD2,
-  0x72EC,
-  0x8AAD,
-  0x6803,
-  0x6A61,
-  0x51F8,
-  0x7A81,
-  0x6934,
-  0x5C4A,
-  0x9CF6,
-  0x82EB,
-  0x5BC5,
-  0x9149,
-  0x701E,
-  0x5678,
-  0x5C6F,
-  0x60C7,
-  0x6566,
-  0x6C8C,
-  0x8C5A,
-  0x9041,
-  0x9813,
-  0x5451,
-  0x66C7,
-  0x920D,
-  0x5948,
-  0x90A3,
-  0x5185,
-  0x4E4D,
-  0x51EA,
-  0x8599,
-  0x8B0E,
-  0x7058,
-  0x637A,
-  0x934B,
-  0x6962,
-  0x99B4,
-  0x7E04,
-  0x7577,
-  0x5357,
-  0x6960,
-  0x8EDF,
-  0x96E3,
-  0x6C5D,
-  0x4E8C,
-  0x5C3C,
-  0x5F10,
-  0x8FE9,
-  0x5302,
-  0x8CD1,
-  0x8089,
-  0x8679,
-  0x5EFF,
-  0x65E5,
-  0x4E73,
-  0x5165,
-  0x5982,
-  0x5C3F,
-  0x97EE,
-  0x4EFB,
-  0x598A,
-  0x5FCD,
-  0x8A8D,
-  0x6FE1,
-  0x79B0,
-  0x7962,
-  0x5BE7,
-  0x8471,
-  0x732B,
-  0x71B1,
-  0x5E74,
-  0x5FF5,
-  0x637B,
-  0x649A,
-  0x71C3,
-  0x7C98,
-  0x4E43,
-  0x5EFC,
-  0x4E4B,
-  0x57DC,
-  0x56A2,
-  0x60A9,
-  0x6FC3,
-  0x7D0D,
-  0x80FD,
-  0x8133,
-  0x81BF,
-  0x8FB2,
-  0x8997,
-  0x86A4,
-  0x5DF4,
-  0x628A,
-  0x64AD,
-  0x8987,
-  0x6777,
-  0x6CE2,
-  0x6D3E,
-  0x7436,
-  0x7834,
-  0x5A46,
-  0x7F75,
-  0x82AD,
-  0x99AC,
-  0x4FF3,
-  0x5EC3,
-  0x62DD,
-  0x6392,
-  0x6557,
-  0x676F,
-  0x76C3,
-  0x724C,
-  0x80CC,
-  0x80BA,
-  0x8F29,
-  0x914D,
-  0x500D,
-  0x57F9,
-  0x5A92,
-  0x6885,
-  0x6973,
-  0x7164,
-  0x72FD,
-  0x8CB7,
-  0x58F2,
-  0x8CE0,
-  0x966A,
-  0x9019,
-  0x877F,
-  0x79E4,
-  0x77E7,
-  0x8429,
-  0x4F2F,
-  0x5265,
-  0x535A,
-  0x62CD,
-  0x67CF,
-  0x6CCA,
-  0x767D,
-  0x7B94,
-  0x7C95,
-  0x8236,
-  0x8584,
-  0x8FEB,
-  0x66DD,
-  0x6F20,
-  0x7206,
-  0x7E1B,
-  0x83AB,
-  0x99C1,
-  0x9EA6,
-  0x51FD,
-  0x7BB1,
-  0x7872,
-  0x7BB8,
-  0x8087,
-  0x7B48,
-  0x6AE8,
-  0x5E61,
-  0x808C,
-  0x7551,
-  0x7560,
-  0x516B,
-  0x9262,
-  0x6E8C,
-  0x767A,
-  0x9197,
-  0x9AEA,
-  0x4F10,
-  0x7F70,
-  0x629C,
-  0x7B4F,
-  0x95A5,
-  0x9CE9,
-  0x567A,
-  0x5859,
-  0x86E4,
-  0x96BC,
-  0x4F34,
-  0x5224,
-  0x534A,
-  0x53CD,
-  0x53DB,
-  0x5E06,
-  0x642C,
-  0x6591,
-  0x677F,
-  0x6C3E,
-  0x6C4E,
-  0x7248,
-  0x72AF,
-  0x73ED,
-  0x7554,
-  0x7E41,
-  0x822C,
-  0x85E9,
-  0x8CA9,
-  0x7BC4,
-  0x91C6,
-  0x7169,
-  0x9812,
-  0x98EF,
-  0x633D,
-  0x6669,
-  0x756A,
-  0x76E4,
-  0x78D0,
-  0x8543,
-  0x86EE,
-  0x532A,
-  0x5351,
-  0x5426,
-  0x5983,
-  0x5E87,
-  0x5F7C,
-  0x60B2,
-  0x6249,
-  0x6279,
-  0x62AB,
-  0x6590,
-  0x6BD4,
-  0x6CCC,
-  0x75B2,
-  0x76AE,
-  0x7891,
-  0x79D8,
-  0x7DCB,
-  0x7F77,
-  0x80A5,
-  0x88AB,
-  0x8AB9,
-  0x8CBB,
-  0x907F,
-  0x975E,
-  0x98DB,
-  0x6A0B,
-  0x7C38,
-  0x5099,
-  0x5C3E,
-  0x5FAE,
-  0x6787,
-  0x6BD8,
-  0x7435,
-  0x7709,
-  0x7F8E,
-  0x9F3B,
-  0x67CA,
-  0x7A17,
-  0x5339,
-  0x758B,
-  0x9AED,
-  0x5F66,
-  0x819D,
-  0x83F1,
-  0x8098,
-  0x5F3C,
-  0x5FC5,
-  0x7562,
-  0x7B46,
-  0x903C,
-  0x6867,
-  0x59EB,
-  0x5A9B,
-  0x7D10,
-  0x767E,
-  0x8B2C,
-  0x4FF5,
-  0x5F6A,
-  0x6A19,
-  0x6C37,
-  0x6F02,
-  0x74E2,
-  0x7968,
-  0x8868,
-  0x8A55,
-  0x8C79,
-  0x5EDF,
-  0x63CF,
-  0x75C5,
-  0x79D2,
-  0x82D7,
-  0x9328,
-  0x92F2,
-  0x849C,
-  0x86ED,
-  0x9C2D,
-  0x54C1,
-  0x5F6C,
-  0x658C,
-  0x6D5C,
-  0x7015,
-  0x8CA7,
-  0x8CD3,
-  0x983B,
-  0x654F,
-  0x74F6,
-  0x4E0D,
-  0x4ED8,
-  0x57E0,
-  0x592B,
-  0x5A66,
-  0x5BCC,
-  0x51A8,
-  0x5E03,
-  0x5E9C,
-  0x6016,
-  0x6276,
-  0x6577,
-  0x65A7,
-  0x666E,
-  0x6D6E,
-  0x7236,
-  0x7B26,
-  0x8150,
-  0x819A,
-  0x8299,
-  0x8B5C,
-  0x8CA0,
-  0x8CE6,
-  0x8D74,
-  0x961C,
-  0x9644,
-  0x4FAE,
-  0x64AB,
-  0x6B66,
-  0x821E,
-  0x8461,
-  0x856A,
-  0x90E8,
-  0x5C01,
-  0x6953,
-  0x98A8,
-  0x847A,
-  0x8557,
-  0x4F0F,
-  0x526F,
-  0x5FA9,
-  0x5E45,
-  0x670D,
-  0x798F,
-  0x8179,
-  0x8907,
-  0x8986,
-  0x6DF5,
-  0x5F17,
-  0x6255,
-  0x6CB8,
-  0x4ECF,
-  0x7269,
-  0x9B92,
-  0x5206,
-  0x543B,
-  0x5674,
-  0x58B3,
-  0x61A4,
-  0x626E,
-  0x711A,
-  0x596E,
-  0x7C89,
-  0x7CDE,
-  0x7D1B,
-  0x96F0,
-  0x6587,
-  0x805E,
-  0x4E19,
-  0x4F75,
-  0x5175,
-  0x5840,
-  0x5E63,
-  0x5E73,
-  0x5F0A,
-  0x67C4,
-  0x4E26,
-  0x853D,
-  0x9589,
-  0x965B,
-  0x7C73,
-  0x9801,
-  0x50FB,
-  0x58C1,
-  0x7656,
-  0x78A7,
-  0x5225,
-  0x77A5,
-  0x8511,
-  0x7B86,
-  0x504F,
-  0x5909,
-  0x7247,
-  0x7BC7,
-  0x7DE8,
-  0x8FBA,
-  0x8FD4,
-  0x904D,
-  0x4FBF,
-  0x52C9,
-  0x5A29,
-  0x5F01,
-  0x97AD,
-  0x4FDD,
-  0x8217,
-  0x92EA,
-  0x5703,
-  0x6355,
-  0x6B69,
-  0x752B,
-  0x88DC,
-  0x8F14,
-  0x7A42,
-  0x52DF,
-  0x5893,
-  0x6155,
-  0x620A,
-  0x66AE,
-  0x6BCD,
-  0x7C3F,
-  0x83E9,
-  0x5023,
-  0x4FF8,
-  0x5305,
-  0x5446,
-  0x5831,
-  0x5949,
-  0x5B9D,
-  0x5CF0,
-  0x5CEF,
-  0x5D29,
-  0x5E96,
-  0x62B1,
-  0x6367,
-  0x653E,
-  0x65B9,
-  0x670B,
-  0x6CD5,
-  0x6CE1,
-  0x70F9,
-  0x7832,
-  0x7E2B,
-  0x80DE,
-  0x82B3,
-  0x840C,
-  0x84EC,
-  0x8702,
-  0x8912,
-  0x8A2A,
-  0x8C4A,
-  0x90A6,
-  0x92D2,
-  0x98FD,
-  0x9CF3,
-  0x9D6C,
-  0x4E4F,
-  0x4EA1,
-  0x508D,
-  0x5256,
-  0x574A,
-  0x59A8,
-  0x5E3D,
-  0x5FD8,
-  0x5FD9,
-  0x623F,
-  0x66B4,
-  0x671B,
-  0x67D0,
-  0x68D2,
-  0x5192,
-  0x7D21,
-  0x80AA,
-  0x81A8,
-  0x8B00,
-  0x8C8C,
-  0x8CBF,
-  0x927E,
-  0x9632,
-  0x5420,
-  0x982C,
-  0x5317,
-  0x50D5,
-  0x535C,
-  0x58A8,
-  0x64B2,
-  0x6734,
-  0x7267,
-  0x7766,
-  0x7A46,
-  0x91E6,
-  0x52C3,
-  0x6CA1,
-  0x6B86,
-  0x5800,
-  0x5E4C,
-  0x5954,
-  0x672C,
-  0x7FFB,
-  0x51E1,
-  0x76C6,
-  0x6469,
-  0x78E8,
-  0x9B54,
-  0x9EBB,
-  0x57CB,
-  0x59B9,
-  0x6627,
-  0x679A,
-  0x6BCE,
-  0x54E9,
-  0x69D9,
-  0x5E55,
-  0x819C,
-  0x6795,
-  0x9BAA,
-  0x67FE,
-  0x9C52,
-  0x685D,
-  0x4EA6,
-  0x4FE3,
-  0x53C8,
-  0x62B9,
-  0x672B,
-  0x6CAB,
-  0x8FC4,
-  0x4FAD,
-  0x7E6D,
-  0x9EBF,
-  0x4E07,
-  0x6162,
-  0x6E80,
-  0x6F2B,
-  0x8513,
-  0x5473,
-  0x672A,
-  0x9B45,
-  0x5DF3,
-  0x7B95,
-  0x5CAC,
-  0x5BC6,
-  0x871C,
-  0x6E4A,
-  0x84D1,
-  0x7A14,
-  0x8108,
-  0x5999,
-  0x7C8D,
-  0x6C11,
-  0x7720,
-  0x52D9,
-  0x5922,
-  0x7121,
-  0x725F,
-  0x77DB,
-  0x9727,
-  0x9D61,
-  0x690B,
-  0x5A7F,
-  0x5A18,
-  0x51A5,
-  0x540D,
-  0x547D,
-  0x660E,
-  0x76DF,
-  0x8FF7,
-  0x9298,
-  0x9CF4,
-  0x59EA,
-  0x725D,
-  0x6EC5,
-  0x514D,
-  0x68C9,
-  0x7DBF,
-  0x7DEC,
-  0x9762,
-  0x9EBA,
-  0x6478,
-  0x6A21,
-  0x8302,
-  0x5984,
-  0x5B5F,
-  0x6BDB,
-  0x731B,
-  0x76F2,
-  0x7DB2,
-  0x8017,
-  0x8499,
-  0x5132,
-  0x6728,
-  0x9ED9,
-  0x76EE,
-  0x6762,
-  0x52FF,
-  0x9905,
-  0x5C24,
-  0x623B,
-  0x7C7E,
-  0x8CB0,
-  0x554F,
-  0x60B6,
-  0x7D0B,
-  0x9580,
-  0x5301,
-  0x4E5F,
-  0x51B6,
-  0x591C,
-  0x723A,
-  0x8036,
-  0x91CE,
-  0x5F25,
-  0x77E2,
-  0x5384,
-  0x5F79,
-  0x7D04,
-  0x85AC,
-  0x8A33,
-  0x8E8D,
-  0x9756,
-  0x67F3,
-  0x85AE,
-  0x9453,
-  0x6109,
-  0x6108,
-  0x6CB9,
-  0x7652,
-  0x8AED,
-  0x8F38,
-  0x552F,
-  0x4F51,
-  0x512A,
-  0x52C7,
-  0x53CB,
-  0x5BA5,
-  0x5E7D,
-  0x60A0,
-  0x6182,
-  0x63D6,
-  0x6709,
-  0x67DA,
-  0x6E67,
-  0x6D8C,
-  0x7336,
-  0x7337,
-  0x7531,
-  0x7950,
-  0x88D5,
-  0x8A98,
-  0x904A,
-  0x9091,
-  0x90F5,
-  0x96C4,
-  0x878D,
-  0x5915,
-  0x4E88,
-  0x4F59,
-  0x4E0E,
-  0x8A89,
-  0x8F3F,
-  0x9810,
-  0x50AD,
-  0x5E7C,
-  0x5996,
-  0x5BB9,
-  0x5EB8,
-  0x63DA,
-  0x63FA,
-  0x64C1,
-  0x66DC,
-  0x694A,
-  0x69D8,
-  0x6D0B,
-  0x6EB6,
-  0x7194,
-  0x7528,
-  0x7AAF,
-  0x7F8A,
-  0x8000,
-  0x8449,
-  0x84C9,
-  0x8981,
-  0x8B21,
-  0x8E0A,
-  0x9065,
-  0x967D,
-  0x990A,
-  0x617E,
-  0x6291,
-  0x6B32,
-  0x6C83,
-  0x6D74,
-  0x7FCC,
-  0x7FFC,
-  0x6DC0,
-  0x7F85,
-  0x87BA,
-  0x88F8,
-  0x6765,
-  0x83B1,
-  0x983C,
-  0x96F7,
-  0x6D1B,
-  0x7D61,
-  0x843D,
-  0x916A,
-  0x4E71,
-  0x5375,
-  0x5D50,
-  0x6B04,
-  0x6FEB,
-  0x85CD,
-  0x862D,
-  0x89A7,
-  0x5229,
-  0x540F,
-  0x5C65,
-  0x674E,
-  0x68A8,
-  0x7406,
-  0x7483,
-  0x75E2,
-  0x88CF,
-  0x88E1,
-  0x91CC,
-  0x96E2,
-  0x9678,
-  0x5F8B,
-  0x7387,
-  0x7ACB,
-  0x844E,
-  0x63A0,
-  0x7565,
-  0x5289,
-  0x6D41,
-  0x6E9C,
-  0x7409,
-  0x7559,
-  0x786B,
-  0x7C92,
-  0x9686,
-  0x7ADC,
-  0x9F8D,
-  0x4FB6,
-  0x616E,
-  0x65C5,
-  0x865C,
-  0x4E86,
-  0x4EAE,
-  0x50DA,
-  0x4E21,
-  0x51CC,
-  0x5BEE,
-  0x6599,
-  0x6881,
-  0x6DBC,
-  0x731F,
-  0x7642,
-  0x77AD,
-  0x7A1C,
-  0x7CE7,
-  0x826F,
-  0x8AD2,
-  0x907C,
-  0x91CF,
-  0x9675,
-  0x9818,
-  0x529B,
-  0x7DD1,
-  0x502B,
-  0x5398,
-  0x6797,
-  0x6DCB,
-  0x71D0,
-  0x7433,
-  0x81E8,
-  0x8F2A,
-  0x96A3,
-  0x9C57,
-  0x9E9F,
-  0x7460,
-  0x5841,
-  0x6D99,
-  0x7D2F,
-  0x985E,
-  0x4EE4,
-  0x4F36,
-  0x4F8B,
-  0x51B7,
-  0x52B1,
-  0x5DBA,
-  0x601C,
-  0x73B2,
-  0x793C,
-  0x82D3,
-  0x9234,
-  0x96B7,
-  0x96F6,
-  0x970A,
-  0x9E97,
-  0x9F62,
-  0x66A6,
-  0x6B74,
-  0x5217,
-  0x52A3,
-  0x70C8,
-  0x88C2,
-  0x5EC9,
-  0x604B,
-  0x6190,
-  0x6F23,
-  0x7149,
-  0x7C3E,
-  0x7DF4,
-  0x806F,
-  0x84EE,
-  0x9023,
-  0x932C,
-  0x5442,
-  0x9B6F,
-  0x6AD3,
-  0x7089,
-  0x8CC2,
-  0x8DEF,
-  0x9732,
-  0x52B4,
-  0x5A41,
-  0x5ECA,
-  0x5F04,
-  0x6717,
-  0x697C,
-  0x6994,
-  0x6D6A,
-  0x6F0F,
-  0x7262,
-  0x72FC,
-  0x7BED,
-  0x8001,
-  0x807E,
-  0x874B,
-  0x90CE,
-  0x516D,
-  0x9E93,
-  0x7984,
-  0x808B,
-  0x9332,
-  0x8AD6,
-  0x502D,
-  0x548C,
-  0x8A71,
-  0x6B6A,
-  0x8CC4,
-  0x8107,
-  0x60D1,
-  0x67A0,
-  0x9DF2,
-  0x4E99,
-  0x4E98,
-  0x9C10,
-  0x8A6B,
-  0x85C1,
-  0x8568,
-  0x6900,
-  0x6E7E,
-  0x7897,
-  0x8155
-};
-
-/* d0a1 to f4a6 is contiguous */
-
-static unsigned short d02f4[] = {
-  0x5F0C,
-  0x4E10,
-  0x4E15,
-  0x4E2A,
-  0x4E31,
-  0x4E36,
-  0x4E3C,
-  0x4E3F,
-  0x4E42,
-  0x4E56,
-  0x4E58,
-  0x4E82,
-  0x4E85,
-  0x8C6B,
-  0x4E8A,
-  0x8212,
-  0x5F0D,
-  0x4E8E,
-  0x4E9E,
-  0x4E9F,
-  0x4EA0,
-  0x4EA2,
-  0x4EB0,
-  0x4EB3,
-  0x4EB6,
-  0x4ECE,
-  0x4ECD,
-  0x4EC4,
-  0x4EC6,
-  0x4EC2,
-  0x4ED7,
-  0x4EDE,
-  0x4EED,
-  0x4EDF,
-  0x4EF7,
-  0x4F09,
-  0x4F5A,
-  0x4F30,
-  0x4F5B,
-  0x4F5D,
-  0x4F57,
-  0x4F47,
-  0x4F76,
-  0x4F88,
-  0x4F8F,
-  0x4F98,
-  0x4F7B,
-  0x4F69,
-  0x4F70,
-  0x4F91,
-  0x4F6F,
-  0x4F86,
-  0x4F96,
-  0x5118,
-  0x4FD4,
-  0x4FDF,
-  0x4FCE,
-  0x4FD8,
-  0x4FDB,
-  0x4FD1,
-  0x4FDA,
-  0x4FD0,
-  0x4FE4,
-  0x4FE5,
-  0x501A,
-  0x5028,
-  0x5014,
-  0x502A,
-  0x5025,
-  0x5005,
-  0x4F1C,
-  0x4FF6,
-  0x5021,
-  0x5029,
-  0x502C,
-  0x4FFE,
-  0x4FEF,
-  0x5011,
-  0x5006,
-  0x5043,
-  0x5047,
-  0x6703,
-  0x5055,
-  0x5050,
-  0x5048,
-  0x505A,
-  0x5056,
-  0x506C,
-  0x5078,
-  0x5080,
-  0x509A,
-  0x5085,
-  0x50B4,
-  0x50B2,
-  0x50C9,
-  0x50CA,
-  0x50B3,
-  0x50C2,
-  0x50D6,
-  0x50DE,
-  0x50E5,
-  0x50ED,
-  0x50E3,
-  0x50EE,
-  0x50F9,
-  0x50F5,
-  0x5109,
-  0x5101,
-  0x5102,
-  0x5116,
-  0x5115,
-  0x5114,
-  0x511A,
-  0x5121,
-  0x513A,
-  0x5137,
-  0x513C,
-  0x513B,
-  0x513F,
-  0x5140,
-  0x5152,
-  0x514C,
-  0x5154,
-  0x5162,
-  0x7AF8,
-  0x5169,
-  0x516A,
-  0x516E,
-  0x5180,
-  0x5182,
-  0x56D8,
-  0x518C,
-  0x5189,
-  0x518F,
-  0x5191,
-  0x5193,
-  0x5195,
-  0x5196,
-  0x51A4,
-  0x51A6,
-  0x51A2,
-  0x51A9,
-  0x51AA,
-  0x51AB,
-  0x51B3,
-  0x51B1,
-  0x51B2,
-  0x51B0,
-  0x51B5,
-  0x51BD,
-  0x51C5,
-  0x51C9,
-  0x51DB,
-  0x51E0,
-  0x8655,
-  0x51E9,
-  0x51ED,
-  0x51F0,
-  0x51F5,
-  0x51FE,
-  0x5204,
-  0x520B,
-  0x5214,
-  0x520E,
-  0x5227,
-  0x522A,
-  0x522E,
-  0x5233,
-  0x5239,
-  0x524F,
-  0x5244,
-  0x524B,
-  0x524C,
-  0x525E,
-  0x5254,
-  0x526A,
-  0x5274,
-  0x5269,
-  0x5273,
-  0x527F,
-  0x527D,
-  0x528D,
-  0x5294,
-  0x5292,
-  0x5271,
-  0x5288,
-  0x5291,
-  0x8FA8,
-  0x8FA7,
-  0x52AC,
-  0x52AD,
-  0x52BC,
-  0x52B5,
-  0x52C1,
-  0x52CD,
-  0x52D7,
-  0x52DE,
-  0x52E3,
-  0x52E6,
-  0x98ED,
-  0x52E0,
-  0x52F3,
-  0x52F5,
-  0x52F8,
-  0x52F9,
-  0x5306,
-  0x5308,
-  0x7538,
-  0x530D,
-  0x5310,
-  0x530F,
-  0x5315,
-  0x531A,
-  0x5323,
-  0x532F,
-  0x5331,
-  0x5333,
-  0x5338,
-  0x5340,
-  0x5346,
-  0x5345,
-  0x4E17,
-  0x5349,
-  0x534D,
-  0x51D6,
-  0x535E,
-  0x5369,
-  0x536E,
-  0x5918,
-  0x537B,
-  0x5377,
-  0x5382,
-  0x5396,
-  0x53A0,
-  0x53A6,
-  0x53A5,
-  0x53AE,
-  0x53B0,
-  0x53B6,
-  0x53C3,
-  0x7C12,
-  0x96D9,
-  0x53DF,
-  0x66FC,
-  0x71EE,
-  0x53EE,
-  0x53E8,
-  0x53ED,
-  0x53FA,
-  0x5401,
-  0x543D,
-  0x5440,
-  0x542C,
-  0x542D,
-  0x543C,
-  0x542E,
-  0x5436,
-  0x5429,
-  0x541D,
-  0x544E,
-  0x548F,
-  0x5475,
-  0x548E,
-  0x545F,
-  0x5471,
-  0x5477,
-  0x5470,
-  0x5492,
-  0x547B,
-  0x5480,
-  0x5476,
-  0x5484,
-  0x5490,
-  0x5486,
-  0x54C7,
-  0x54A2,
-  0x54B8,
-  0x54A5,
-  0x54AC,
-  0x54C4,
-  0x54C8,
-  0x54A8,
-  0x54AB,
-  0x54C2,
-  0x54A4,
-  0x54BE,
-  0x54BC,
-  0x54D8,
-  0x54E5,
-  0x54E6,
-  0x550F,
-  0x5514,
-  0x54FD,
-  0x54EE,
-  0x54ED,
-  0x54FA,
-  0x54E2,
-  0x5539,
-  0x5540,
-  0x5563,
-  0x554C,
-  0x552E,
-  0x555C,
-  0x5545,
-  0x5556,
-  0x5557,
-  0x5538,
-  0x5533,
-  0x555D,
-  0x5599,
-  0x5580,
-  0x54AF,
-  0x558A,
-  0x559F,
-  0x557B,
-  0x557E,
-  0x5598,
-  0x559E,
-  0x55AE,
-  0x557C,
-  0x5583,
-  0x55A9,
-  0x5587,
-  0x55A8,
-  0x55DA,
-  0x55C5,
-  0x55DF,
-  0x55C4,
-  0x55DC,
-  0x55E4,
-  0x55D4,
-  0x5614,
-  0x55F7,
-  0x5616,
-  0x55FE,
-  0x55FD,
-  0x561B,
-  0x55F9,
-  0x564E,
-  0x5650,
-  0x71DF,
-  0x5634,
-  0x5636,
-  0x5632,
-  0x5638,
-  0x566B,
-  0x5664,
-  0x562F,
-  0x566C,
-  0x566A,
-  0x5686,
-  0x5680,
-  0x568A,
-  0x56A0,
-  0x5694,
-  0x568F,
-  0x56A5,
-  0x56AE,
-  0x56B6,
-  0x56B4,
-  0x56C2,
-  0x56BC,
-  0x56C1,
-  0x56C3,
-  0x56C0,
-  0x56C8,
-  0x56CE,
-  0x56D1,
-  0x56D3,
-  0x56D7,
-  0x56EE,
-  0x56F9,
-  0x5700,
-  0x56FF,
-  0x5704,
-  0x5709,
-  0x5708,
-  0x570B,
-  0x570D,
-  0x5713,
-  0x5718,
-  0x5716,
-  0x55C7,
-  0x571C,
-  0x5726,
-  0x5737,
-  0x5738,
-  0x574E,
-  0x573B,
-  0x5740,
-  0x574F,
-  0x5769,
-  0x57C0,
-  0x5788,
-  0x5761,
-  0x577F,
-  0x5789,
-  0x5793,
-  0x57A0,
-  0x57B3,
-  0x57A4,
-  0x57AA,
-  0x57B0,
-  0x57C3,
-  0x57C6,
-  0x57D4,
-  0x57D2,
-  0x57D3,
-  0x580A,
-  0x57D6,
-  0x57E3,
-  0x580B,
-  0x5819,
-  0x581D,
-  0x5872,
-  0x5821,
-  0x5862,
-  0x584B,
-  0x5870,
-  0x6BC0,
-  0x5852,
-  0x583D,
-  0x5879,
-  0x5885,
-  0x58B9,
-  0x589F,
-  0x58AB,
-  0x58BA,
-  0x58DE,
-  0x58BB,
-  0x58B8,
-  0x58AE,
-  0x58C5,
-  0x58D3,
-  0x58D1,
-  0x58D7,
-  0x58D9,
-  0x58D8,
-  0x58E5,
-  0x58DC,
-  0x58E4,
-  0x58DF,
-  0x58EF,
-  0x58FA,
-  0x58F9,
-  0x58FB,
-  0x58FC,
-  0x58FD,
-  0x5902,
-  0x590A,
-  0x5910,
-  0x591B,
-  0x68A6,
-  0x5925,
-  0x592C,
-  0x592D,
-  0x5932,
-  0x5938,
-  0x593E,
-  0x7AD2,
-  0x5955,
-  0x5950,
-  0x594E,
-  0x595A,
-  0x5958,
-  0x5962,
-  0x5960,
-  0x5967,
-  0x596C,
-  0x5969,
-  0x5978,
-  0x5981,
-  0x599D,
-  0x4F5E,
-  0x4FAB,
-  0x59A3,
-  0x59B2,
-  0x59C6,
-  0x59E8,
-  0x59DC,
-  0x598D,
-  0x59D9,
-  0x59DA,
-  0x5A25,
-  0x5A1F,
-  0x5A11,
-  0x5A1C,
-  0x5A09,
-  0x5A1A,
-  0x5A40,
-  0x5A6C,
-  0x5A49,
-  0x5A35,
-  0x5A36,
-  0x5A62,
-  0x5A6A,
-  0x5A9A,
-  0x5ABC,
-  0x5ABE,
-  0x5ACB,
-  0x5AC2,
-  0x5ABD,
-  0x5AE3,
-  0x5AD7,
-  0x5AE6,
-  0x5AE9,
-  0x5AD6,
-  0x5AFA,
-  0x5AFB,
-  0x5B0C,
-  0x5B0B,
-  0x5B16,
-  0x5B32,
-  0x5AD0,
-  0x5B2A,
-  0x5B36,
-  0x5B3E,
-  0x5B43,
-  0x5B45,
-  0x5B40,
-  0x5B51,
-  0x5B55,
-  0x5B5A,
-  0x5B5B,
-  0x5B65,
-  0x5B69,
-  0x5B70,
-  0x5B73,
-  0x5B75,
-  0x5B78,
-  0x6588,
-  0x5B7A,
-  0x5B80,
-  0x5B83,
-  0x5BA6,
-  0x5BB8,
-  0x5BC3,
-  0x5BC7,
-  0x5BC9,
-  0x5BD4,
-  0x5BD0,
-  0x5BE4,
-  0x5BE6,
-  0x5BE2,
-  0x5BDE,
-  0x5BE5,
-  0x5BEB,
-  0x5BF0,
-  0x5BF6,
-  0x5BF3,
-  0x5C05,
-  0x5C07,
-  0x5C08,
-  0x5C0D,
-  0x5C13,
-  0x5C20,
-  0x5C22,
-  0x5C28,
-  0x5C38,
-  0x5C39,
-  0x5C41,
-  0x5C46,
-  0x5C4E,
-  0x5C53,
-  0x5C50,
-  0x5C4F,
-  0x5B71,
-  0x5C6C,
-  0x5C6E,
-  0x4E62,
-  0x5C76,
-  0x5C79,
-  0x5C8C,
-  0x5C91,
-  0x5C94,
-  0x599B,
-  0x5CAB,
-  0x5CBB,
-  0x5CB6,
-  0x5CBC,
-  0x5CB7,
-  0x5CC5,
-  0x5CBE,
-  0x5CC7,
-  0x5CD9,
-  0x5CE9,
-  0x5CFD,
-  0x5CFA,
-  0x5CED,
-  0x5D8C,
-  0x5CEA,
-  0x5D0B,
-  0x5D15,
-  0x5D17,
-  0x5D5C,
-  0x5D1F,
-  0x5D1B,
-  0x5D11,
-  0x5D14,
-  0x5D22,
-  0x5D1A,
-  0x5D19,
-  0x5D18,
-  0x5D4C,
-  0x5D52,
-  0x5D4E,
-  0x5D4B,
-  0x5D6C,
-  0x5D73,
-  0x5D76,
-  0x5D87,
-  0x5D84,
-  0x5D82,
-  0x5DA2,
-  0x5D9D,
-  0x5DAC,
-  0x5DAE,
-  0x5DBD,
-  0x5D90,
-  0x5DB7,
-  0x5DBC,
-  0x5DC9,
-  0x5DCD,
-  0x5DD3,
-  0x5DD2,
-  0x5DD6,
-  0x5DDB,
-  0x5DEB,
-  0x5DF2,
-  0x5DF5,
-  0x5E0B,
-  0x5E1A,
-  0x5E19,
-  0x5E11,
-  0x5E1B,
-  0x5E36,
-  0x5E37,
-  0x5E44,
-  0x5E43,
-  0x5E40,
-  0x5E4E,
-  0x5E57,
-  0x5E54,
-  0x5E5F,
-  0x5E62,
-  0x5E64,
-  0x5E47,
-  0x5E75,
-  0x5E76,
-  0x5E7A,
-  0x9EBC,
-  0x5E7F,
-  0x5EA0,
-  0x5EC1,
-  0x5EC2,
-  0x5EC8,
-  0x5ED0,
-  0x5ECF,
-  0x5ED6,
-  0x5EE3,
-  0x5EDD,
-  0x5EDA,
-  0x5EDB,
-  0x5EE2,
-  0x5EE1,
-  0x5EE8,
-  0x5EE9,
-  0x5EEC,
-  0x5EF1,
-  0x5EF3,
-  0x5EF0,
-  0x5EF4,
-  0x5EF8,
-  0x5EFE,
-  0x5F03,
-  0x5F09,
-  0x5F5D,
-  0x5F5C,
-  0x5F0B,
-  0x5F11,
-  0x5F16,
-  0x5F29,
-  0x5F2D,
-  0x5F38,
-  0x5F41,
-  0x5F48,
-  0x5F4C,
-  0x5F4E,
-  0x5F2F,
-  0x5F51,
-  0x5F56,
-  0x5F57,
-  0x5F59,
-  0x5F61,
-  0x5F6D,
-  0x5F73,
-  0x5F77,
-  0x5F83,
-  0x5F82,
-  0x5F7F,
-  0x5F8A,
-  0x5F88,
-  0x5F91,
-  0x5F87,
-  0x5F9E,
-  0x5F99,
-  0x5F98,
-  0x5FA0,
-  0x5FA8,
-  0x5FAD,
-  0x5FBC,
-  0x5FD6,
-  0x5FFB,
-  0x5FE4,
-  0x5FF8,
-  0x5FF1,
-  0x5FDD,
-  0x60B3,
-  0x5FFF,
-  0x6021,
-  0x6060,
-  0x6019,
-  0x6010,
-  0x6029,
-  0x600E,
-  0x6031,
-  0x601B,
-  0x6015,
-  0x602B,
-  0x6026,
-  0x600F,
-  0x603A,
-  0x605A,
-  0x6041,
-  0x606A,
-  0x6077,
-  0x605F,
-  0x604A,
-  0x6046,
-  0x604D,
-  0x6063,
-  0x6043,
-  0x6064,
-  0x6042,
-  0x606C,
-  0x606B,
-  0x6059,
-  0x6081,
-  0x608D,
-  0x60E7,
-  0x6083,
-  0x609A,
-  0x6084,
-  0x609B,
-  0x6096,
-  0x6097,
-  0x6092,
-  0x60A7,
-  0x608B,
-  0x60E1,
-  0x60B8,
-  0x60E0,
-  0x60D3,
-  0x60B4,
-  0x5FF0,
-  0x60BD,
-  0x60C6,
-  0x60B5,
-  0x60D8,
-  0x614D,
-  0x6115,
-  0x6106,
-  0x60F6,
-  0x60F7,
-  0x6100,
-  0x60F4,
-  0x60FA,
-  0x6103,
-  0x6121,
-  0x60FB,
-  0x60F1,
-  0x610D,
-  0x610E,
-  0x6147,
-  0x613E,
-  0x6128,
-  0x6127,
-  0x614A,
-  0x613F,
-  0x613C,
-  0x612C,
-  0x6134,
-  0x613D,
-  0x6142,
-  0x6144,
-  0x6173,
-  0x6177,
-  0x6158,
-  0x6159,
-  0x615A,
-  0x616B,
-  0x6174,
-  0x616F,
-  0x6165,
-  0x6171,
-  0x615F,
-  0x615D,
-  0x6153,
-  0x6175,
-  0x6199,
-  0x6196,
-  0x6187,
-  0x61AC,
-  0x6194,
-  0x619A,
-  0x618A,
-  0x6191,
-  0x61AB,
-  0x61AE,
-  0x61CC,
-  0x61CA,
-  0x61C9,
-  0x61F7,
-  0x61C8,
-  0x61C3,
-  0x61C6,
-  0x61BA,
-  0x61CB,
-  0x7F79,
-  0x61CD,
-  0x61E6,
-  0x61E3,
-  0x61F6,
-  0x61FA,
-  0x61F4,
-  0x61FF,
-  0x61FD,
-  0x61FC,
-  0x61FE,
-  0x6200,
-  0x6208,
-  0x6209,
-  0x620D,
-  0x620C,
-  0x6214,
-  0x621B,
-  0x621E,
-  0x6221,
-  0x622A,
-  0x622E,
-  0x6230,
-  0x6232,
-  0x6233,
-  0x6241,
-  0x624E,
-  0x625E,
-  0x6263,
-  0x625B,
-  0x6260,
-  0x6268,
-  0x627C,
-  0x6282,
-  0x6289,
-  0x627E,
-  0x6292,
-  0x6293,
-  0x6296,
-  0x62D4,
-  0x6283,
-  0x6294,
-  0x62D7,
-  0x62D1,
-  0x62BB,
-  0x62CF,
-  0x62FF,
-  0x62C6,
-  0x64D4,
-  0x62C8,
-  0x62DC,
-  0x62CC,
-  0x62CA,
-  0x62C2,
-  0x62C7,
-  0x629B,
-  0x62C9,
-  0x630C,
-  0x62EE,
-  0x62F1,
-  0x6327,
-  0x6302,
-  0x6308,
-  0x62EF,
-  0x62F5,
-  0x6350,
-  0x633E,
-  0x634D,
-  0x641C,
-  0x634F,
-  0x6396,
-  0x638E,
-  0x6380,
-  0x63AB,
-  0x6376,
-  0x63A3,
-  0x638F,
-  0x6389,
-  0x639F,
-  0x63B5,
-  0x636B,
-  0x6369,
-  0x63BE,
-  0x63E9,
-  0x63C0,
-  0x63C6,
-  0x63E3,
-  0x63C9,
-  0x63D2,
-  0x63F6,
-  0x63C4,
-  0x6416,
-  0x6434,
-  0x6406,
-  0x6413,
-  0x6426,
-  0x6436,
-  0x651D,
-  0x6417,
-  0x6428,
-  0x640F,
-  0x6467,
-  0x646F,
-  0x6476,
-  0x644E,
-  0x652A,
-  0x6495,
-  0x6493,
-  0x64A5,
-  0x64A9,
-  0x6488,
-  0x64BC,
-  0x64DA,
-  0x64D2,
-  0x64C5,
-  0x64C7,
-  0x64BB,
-  0x64D8,
-  0x64C2,
-  0x64F1,
-  0x64E7,
-  0x8209,
-  0x64E0,
-  0x64E1,
-  0x62AC,
-  0x64E3,
-  0x64EF,
-  0x652C,
-  0x64F6,
-  0x64F4,
-  0x64F2,
-  0x64FA,
-  0x6500,
-  0x64FD,
-  0x6518,
-  0x651C,
-  0x6505,
-  0x6524,
-  0x6523,
-  0x652B,
-  0x6534,
-  0x6535,
-  0x6537,
-  0x6536,
-  0x6538,
-  0x754B,
-  0x6548,
-  0x6556,
-  0x6555,
-  0x654D,
-  0x6558,
-  0x655E,
-  0x655D,
-  0x6572,
-  0x6578,
-  0x6582,
-  0x6583,
-  0x8B8A,
-  0x659B,
-  0x659F,
-  0x65AB,
-  0x65B7,
-  0x65C3,
-  0x65C6,
-  0x65C1,
-  0x65C4,
-  0x65CC,
-  0x65D2,
-  0x65DB,
-  0x65D9,
-  0x65E0,
-  0x65E1,
-  0x65F1,
-  0x6772,
-  0x660A,
-  0x6603,
-  0x65FB,
-  0x6773,
-  0x6635,
-  0x6636,
-  0x6634,
-  0x661C,
-  0x664F,
-  0x6644,
-  0x6649,
-  0x6641,
-  0x665E,
-  0x665D,
-  0x6664,
-  0x6667,
-  0x6668,
-  0x665F,
-  0x6662,
-  0x6670,
-  0x6683,
-  0x6688,
-  0x668E,
-  0x6689,
-  0x6684,
-  0x6698,
-  0x669D,
-  0x66C1,
-  0x66B9,
-  0x66C9,
-  0x66BE,
-  0x66BC,
-  0x66C4,
-  0x66B8,
-  0x66D6,
-  0x66DA,
-  0x66E0,
-  0x663F,
-  0x66E6,
-  0x66E9,
-  0x66F0,
-  0x66F5,
-  0x66F7,
-  0x670F,
-  0x6716,
-  0x671E,
-  0x6726,
-  0x6727,
-  0x9738,
-  0x672E,
-  0x673F,
-  0x6736,
-  0x6741,
-  0x6738,
-  0x6737,
-  0x6746,
-  0x675E,
-  0x6760,
-  0x6759,
-  0x6763,
-  0x6764,
-  0x6789,
-  0x6770,
-  0x67A9,
-  0x677C,
-  0x676A,
-  0x678C,
-  0x678B,
-  0x67A6,
-  0x67A1,
-  0x6785,
-  0x67B7,
-  0x67EF,
-  0x67B4,
-  0x67EC,
-  0x67B3,
-  0x67E9,
-  0x67B8,
-  0x67E4,
-  0x67DE,
-  0x67DD,
-  0x67E2,
-  0x67EE,
-  0x67B9,
-  0x67CE,
-  0x67C6,
-  0x67E7,
-  0x6A9C,
-  0x681E,
-  0x6846,
-  0x6829,
-  0x6840,
-  0x684D,
-  0x6832,
-  0x684E,
-  0x68B3,
-  0x682B,
-  0x6859,
-  0x6863,
-  0x6877,
-  0x687F,
-  0x689F,
-  0x688F,
-  0x68AD,
-  0x6894,
-  0x689D,
-  0x689B,
-  0x6883,
-  0x6AAE,
-  0x68B9,
-  0x6874,
-  0x68B5,
-  0x68A0,
-  0x68BA,
-  0x690F,
-  0x688D,
-  0x687E,
-  0x6901,
-  0x68CA,
-  0x6908,
-  0x68D8,
-  0x6922,
-  0x6926,
-  0x68E1,
-  0x690C,
-  0x68CD,
-  0x68D4,
-  0x68E7,
-  0x68D5,
-  0x6936,
-  0x6912,
-  0x6904,
-  0x68D7,
-  0x68E3,
-  0x6925,
-  0x68F9,
-  0x68E0,
-  0x68EF,
-  0x6928,
-  0x692A,
-  0x691A,
-  0x6923,
-  0x6921,
-  0x68C6,
-  0x6979,
-  0x6977,
-  0x695C,
-  0x6978,
-  0x696B,
-  0x6954,
-  0x697E,
-  0x696E,
-  0x6939,
-  0x6974,
-  0x693D,
-  0x6959,
-  0x6930,
-  0x6961,
-  0x695E,
-  0x695D,
-  0x6981,
-  0x696A,
-  0x69B2,
-  0x69AE,
-  0x69D0,
-  0x69BF,
-  0x69C1,
-  0x69D3,
-  0x69BE,
-  0x69CE,
-  0x5BE8,
-  0x69CA,
-  0x69DD,
-  0x69BB,
-  0x69C3,
-  0x69A7,
-  0x6A2E,
-  0x6991,
-  0x69A0,
-  0x699C,
-  0x6995,
-  0x69B4,
-  0x69DE,
-  0x69E8,
-  0x6A02,
-  0x6A1B,
-  0x69FF,
-  0x6B0A,
-  0x69F9,
-  0x69F2,
-  0x69E7,
-  0x6A05,
-  0x69B1,
-  0x6A1E,
-  0x69ED,
-  0x6A14,
-  0x69EB,
-  0x6A0A,
-  0x6A12,
-  0x6AC1,
-  0x6A23,
-  0x6A13,
-  0x6A44,
-  0x6A0C,
-  0x6A72,
-  0x6A36,
-  0x6A78,
-  0x6A47,
-  0x6A62,
-  0x6A59,
-  0x6A66,
-  0x6A48,
-  0x6A38,
-  0x6A22,
-  0x6A90,
-  0x6A8D,
-  0x6AA0,
-  0x6A84,
-  0x6AA2,
-  0x6AA3,
-  0x6A97,
-  0x8617,
-  0x6ABB,
-  0x6AC3,
-  0x6AC2,
-  0x6AB8,
-  0x6AB3,
-  0x6AAC,
-  0x6ADE,
-  0x6AD1,
-  0x6ADF,
-  0x6AAA,
-  0x6ADA,
-  0x6AEA,
-  0x6AFB,
-  0x6B05,
-  0x8616,
-  0x6AFA,
-  0x6B12,
-  0x6B16,
-  0x9B31,
-  0x6B1F,
-  0x6B38,
-  0x6B37,
-  0x76DC,
-  0x6B39,
-  0x98EE,
-  0x6B47,
-  0x6B43,
-  0x6B49,
-  0x6B50,
-  0x6B59,
-  0x6B54,
-  0x6B5B,
-  0x6B5F,
-  0x6B61,
-  0x6B78,
-  0x6B79,
-  0x6B7F,
-  0x6B80,
-  0x6B84,
-  0x6B83,
-  0x6B8D,
-  0x6B98,
-  0x6B95,
-  0x6B9E,
-  0x6BA4,
-  0x6BAA,
-  0x6BAB,
-  0x6BAF,
-  0x6BB2,
-  0x6BB1,
-  0x6BB3,
-  0x6BB7,
-  0x6BBC,
-  0x6BC6,
-  0x6BCB,
-  0x6BD3,
-  0x6BDF,
-  0x6BEC,
-  0x6BEB,
-  0x6BF3,
-  0x6BEF,
-  0x9EBE,
-  0x6C08,
-  0x6C13,
-  0x6C14,
-  0x6C1B,
-  0x6C24,
-  0x6C23,
-  0x6C5E,
-  0x6C55,
-  0x6C62,
-  0x6C6A,
-  0x6C82,
-  0x6C8D,
-  0x6C9A,
-  0x6C81,
-  0x6C9B,
-  0x6C7E,
-  0x6C68,
-  0x6C73,
-  0x6C92,
-  0x6C90,
-  0x6CC4,
-  0x6CF1,
-  0x6CD3,
-  0x6CBD,
-  0x6CD7,
-  0x6CC5,
-  0x6CDD,
-  0x6CAE,
-  0x6CB1,
-  0x6CBE,
-  0x6CBA,
-  0x6CDB,
-  0x6CEF,
-  0x6CD9,
-  0x6CEA,
-  0x6D1F,
-  0x884D,
-  0x6D36,
-  0x6D2B,
-  0x6D3D,
-  0x6D38,
-  0x6D19,
-  0x6D35,
-  0x6D33,
-  0x6D12,
-  0x6D0C,
-  0x6D63,
-  0x6D93,
-  0x6D64,
-  0x6D5A,
-  0x6D79,
-  0x6D59,
-  0x6D8E,
-  0x6D95,
-  0x6FE4,
-  0x6D85,
-  0x6DF9,
-  0x6E15,
-  0x6E0A,
-  0x6DB5,
-  0x6DC7,
-  0x6DE6,
-  0x6DB8,
-  0x6DC6,
-  0x6DEC,
-  0x6DDE,
-  0x6DCC,
-  0x6DE8,
-  0x6DD2,
-  0x6DC5,
-  0x6DFA,
-  0x6DD9,
-  0x6DE4,
-  0x6DD5,
-  0x6DEA,
-  0x6DEE,
-  0x6E2D,
-  0x6E6E,
-  0x6E2E,
-  0x6E19,
-  0x6E72,
-  0x6E5F,
-  0x6E3E,
-  0x6E23,
-  0x6E6B,
-  0x6E2B,
-  0x6E76,
-  0x6E4D,
-  0x6E1F,
-  0x6E43,
-  0x6E3A,
-  0x6E4E,
-  0x6E24,
-  0x6EFF,
-  0x6E1D,
-  0x6E38,
-  0x6E82,
-  0x6EAA,
-  0x6E98,
-  0x6EC9,
-  0x6EB7,
-  0x6ED3,
-  0x6EBD,
-  0x6EAF,
-  0x6EC4,
-  0x6EB2,
-  0x6ED4,
-  0x6ED5,
-  0x6E8F,
-  0x6EA5,
-  0x6EC2,
-  0x6E9F,
-  0x6F41,
-  0x6F11,
-  0x704C,
-  0x6EEC,
-  0x6EF8,
-  0x6EFE,
-  0x6F3F,
-  0x6EF2,
-  0x6F31,
-  0x6EEF,
-  0x6F32,
-  0x6ECC,
-  0x6F3E,
-  0x6F13,
-  0x6EF7,
-  0x6F86,
-  0x6F7A,
-  0x6F78,
-  0x6F81,
-  0x6F80,
-  0x6F6F,
-  0x6F5B,
-  0x6FF3,
-  0x6F6D,
-  0x6F82,
-  0x6F7C,
-  0x6F58,
-  0x6F8E,
-  0x6F91,
-  0x6FC2,
-  0x6F66,
-  0x6FB3,
-  0x6FA3,
-  0x6FA1,
-  0x6FA4,
-  0x6FB9,
-  0x6FC6,
-  0x6FAA,
-  0x6FDF,
-  0x6FD5,
-  0x6FEC,
-  0x6FD4,
-  0x6FD8,
-  0x6FF1,
-  0x6FEE,
-  0x6FDB,
-  0x7009,
-  0x700B,
-  0x6FFA,
-  0x7011,
-  0x7001,
-  0x700F,
-  0x6FFE,
-  0x701B,
-  0x701A,
-  0x6F74,
-  0x701D,
-  0x7018,
-  0x701F,
-  0x7030,
-  0x703E,
-  0x7032,
-  0x7051,
-  0x7063,
-  0x7099,
-  0x7092,
-  0x70AF,
-  0x70F1,
-  0x70AC,
-  0x70B8,
-  0x70B3,
-  0x70AE,
-  0x70DF,
-  0x70CB,
-  0x70DD,
-  0x70D9,
-  0x7109,
-  0x70FD,
-  0x711C,
-  0x7119,
-  0x7165,
-  0x7155,
-  0x7188,
-  0x7166,
-  0x7162,
-  0x714C,
-  0x7156,
-  0x716C,
-  0x718F,
-  0x71FB,
-  0x7184,
-  0x7195,
-  0x71A8,
-  0x71AC,
-  0x71D7,
-  0x71B9,
-  0x71BE,
-  0x71D2,
-  0x71C9,
-  0x71D4,
-  0x71CE,
-  0x71E0,
-  0x71EC,
-  0x71E7,
-  0x71F5,
-  0x71FC,
-  0x71F9,
-  0x71FF,
-  0x720D,
-  0x7210,
-  0x721B,
-  0x7228,
-  0x722D,
-  0x722C,
-  0x7230,
-  0x7232,
-  0x723B,
-  0x723C,
-  0x723F,
-  0x7240,
-  0x7246,
-  0x724B,
-  0x7258,
-  0x7274,
-  0x727E,
-  0x7282,
-  0x7281,
-  0x7287,
-  0x7292,
-  0x7296,
-  0x72A2,
-  0x72A7,
-  0x72B9,
-  0x72B2,
-  0x72C3,
-  0x72C6,
-  0x72C4,
-  0x72CE,
-  0x72D2,
-  0x72E2,
-  0x72E0,
-  0x72E1,
-  0x72F9,
-  0x72F7,
-  0x500F,
-  0x7317,
-  0x730A,
-  0x731C,
-  0x7316,
-  0x731D,
-  0x7334,
-  0x732F,
-  0x7329,
-  0x7325,
-  0x733E,
-  0x734E,
-  0x734F,
-  0x9ED8,
-  0x7357,
-  0x736A,
-  0x7368,
-  0x7370,
-  0x7378,
-  0x7375,
-  0x737B,
-  0x737A,
-  0x73C8,
-  0x73B3,
-  0x73CE,
-  0x73BB,
-  0x73C0,
-  0x73E5,
-  0x73EE,
-  0x73DE,
-  0x74A2,
-  0x7405,
-  0x746F,
-  0x7425,
-  0x73F8,
-  0x7432,
-  0x743A,
-  0x7455,
-  0x743F,
-  0x745F,
-  0x7459,
-  0x7441,
-  0x745C,
-  0x7469,
-  0x7470,
-  0x7463,
-  0x746A,
-  0x7476,
-  0x747E,
-  0x748B,
-  0x749E,
-  0x74A7,
-  0x74CA,
-  0x74CF,
-  0x74D4,
-  0x73F1,
-  0x74E0,
-  0x74E3,
-  0x74E7,
-  0x74E9,
-  0x74EE,
-  0x74F2,
-  0x74F0,
-  0x74F1,
-  0x74F8,
-  0x74F7,
-  0x7504,
-  0x7503,
-  0x7505,
-  0x750C,
-  0x750E,
-  0x750D,
-  0x7515,
-  0x7513,
-  0x751E,
-  0x7526,
-  0x752C,
-  0x753C,
-  0x7544,
-  0x754D,
-  0x754A,
-  0x7549,
-  0x755B,
-  0x7546,
-  0x755A,
-  0x7569,
-  0x7564,
-  0x7567,
-  0x756B,
-  0x756D,
-  0x7578,
-  0x7576,
-  0x7586,
-  0x7587,
-  0x7574,
-  0x758A,
-  0x7589,
-  0x7582,
-  0x7594,
-  0x759A,
-  0x759D,
-  0x75A5,
-  0x75A3,
-  0x75C2,
-  0x75B3,
-  0x75C3,
-  0x75B5,
-  0x75BD,
-  0x75B8,
-  0x75BC,
-  0x75B1,
-  0x75CD,
-  0x75CA,
-  0x75D2,
-  0x75D9,
-  0x75E3,
-  0x75DE,
-  0x75FE,
-  0x75FF,
-  0x75FC,
-  0x7601,
-  0x75F0,
-  0x75FA,
-  0x75F2,
-  0x75F3,
-  0x760B,
-  0x760D,
-  0x7609,
-  0x761F,
-  0x7627,
-  0x7620,
-  0x7621,
-  0x7622,
-  0x7624,
-  0x7634,
-  0x7630,
-  0x763B,
-  0x7647,
-  0x7648,
-  0x7646,
-  0x765C,
-  0x7658,
-  0x7661,
-  0x7662,
-  0x7668,
-  0x7669,
-  0x766A,
-  0x7667,
-  0x766C,
-  0x7670,
-  0x7672,
-  0x7676,
-  0x7678,
-  0x767C,
-  0x7680,
-  0x7683,
-  0x7688,
-  0x768B,
-  0x768E,
-  0x7696,
-  0x7693,
-  0x7699,
-  0x769A,
-  0x76B0,
-  0x76B4,
-  0x76B8,
-  0x76B9,
-  0x76BA,
-  0x76C2,
-  0x76CD,
-  0x76D6,
-  0x76D2,
-  0x76DE,
-  0x76E1,
-  0x76E5,
-  0x76E7,
-  0x76EA,
-  0x862F,
-  0x76FB,
-  0x7708,
-  0x7707,
-  0x7704,
-  0x7729,
-  0x7724,
-  0x771E,
-  0x7725,
-  0x7726,
-  0x771B,
-  0x7737,
-  0x7738,
-  0x7747,
-  0x775A,
-  0x7768,
-  0x776B,
-  0x775B,
-  0x7765,
-  0x777F,
-  0x777E,
-  0x7779,
-  0x778E,
-  0x778B,
-  0x7791,
-  0x77A0,
-  0x779E,
-  0x77B0,
-  0x77B6,
-  0x77B9,
-  0x77BF,
-  0x77BC,
-  0x77BD,
-  0x77BB,
-  0x77C7,
-  0x77CD,
-  0x77D7,
-  0x77DA,
-  0x77DC,
-  0x77E3,
-  0x77EE,
-  0x77FC,
-  0x780C,
-  0x7812,
-  0x7926,
-  0x7820,
-  0x792A,
-  0x7845,
-  0x788E,
-  0x7874,
-  0x7886,
-  0x787C,
-  0x789A,
-  0x788C,
-  0x78A3,
-  0x78B5,
-  0x78AA,
-  0x78AF,
-  0x78D1,
-  0x78C6,
-  0x78CB,
-  0x78D4,
-  0x78BE,
-  0x78BC,
-  0x78C5,
-  0x78CA,
-  0x78EC,
-  0x78E7,
-  0x78DA,
-  0x78FD,
-  0x78F4,
-  0x7907,
-  0x7912,
-  0x7911,
-  0x7919,
-  0x792C,
-  0x792B,
-  0x7940,
-  0x7960,
-  0x7957,
-  0x795F,
-  0x795A,
-  0x7955,
-  0x7953,
-  0x797A,
-  0x797F,
-  0x798A,
-  0x799D,
-  0x79A7,
-  0x9F4B,
-  0x79AA,
-  0x79AE,
-  0x79B3,
-  0x79B9,
-  0x79BA,
-  0x79C9,
-  0x79D5,
-  0x79E7,
-  0x79EC,
-  0x79E1,
-  0x79E3,
-  0x7A08,
-  0x7A0D,
-  0x7A18,
-  0x7A19,
-  0x7A20,
-  0x7A1F,
-  0x7980,
-  0x7A31,
-  0x7A3B,
-  0x7A3E,
-  0x7A37,
-  0x7A43,
-  0x7A57,
-  0x7A49,
-  0x7A61,
-  0x7A62,
-  0x7A69,
-  0x9F9D,
-  0x7A70,
-  0x7A79,
-  0x7A7D,
-  0x7A88,
-  0x7A97,
-  0x7A95,
-  0x7A98,
-  0x7A96,
-  0x7AA9,
-  0x7AC8,
-  0x7AB0,
-  0x7AB6,
-  0x7AC5,
-  0x7AC4,
-  0x7ABF,
-  0x9083,
-  0x7AC7,
-  0x7ACA,
-  0x7ACD,
-  0x7ACF,
-  0x7AD5,
-  0x7AD3,
-  0x7AD9,
-  0x7ADA,
-  0x7ADD,
-  0x7AE1,
-  0x7AE2,
-  0x7AE6,
-  0x7AED,
-  0x7AF0,
-  0x7B02,
-  0x7B0F,
-  0x7B0A,
-  0x7B06,
-  0x7B33,
-  0x7B18,
-  0x7B19,
-  0x7B1E,
-  0x7B35,
-  0x7B28,
-  0x7B36,
-  0x7B50,
-  0x7B7A,
-  0x7B04,
-  0x7B4D,
-  0x7B0B,
-  0x7B4C,
-  0x7B45,
-  0x7B75,
-  0x7B65,
-  0x7B74,
-  0x7B67,
-  0x7B70,
-  0x7B71,
-  0x7B6C,
-  0x7B6E,
-  0x7B9D,
-  0x7B98,
-  0x7B9F,
-  0x7B8D,
-  0x7B9C,
-  0x7B9A,
-  0x7B8B,
-  0x7B92,
-  0x7B8F,
-  0x7B5D,
-  0x7B99,
-  0x7BCB,
-  0x7BC1,
-  0x7BCC,
-  0x7BCF,
-  0x7BB4,
-  0x7BC6,
-  0x7BDD,
-  0x7BE9,
-  0x7C11,
-  0x7C14,
-  0x7BE6,
-  0x7BE5,
-  0x7C60,
-  0x7C00,
-  0x7C07,
-  0x7C13,
-  0x7BF3,
-  0x7BF7,
-  0x7C17,
-  0x7C0D,
-  0x7BF6,
-  0x7C23,
-  0x7C27,
-  0x7C2A,
-  0x7C1F,
-  0x7C37,
-  0x7C2B,
-  0x7C3D,
-  0x7C4C,
-  0x7C43,
-  0x7C54,
-  0x7C4F,
-  0x7C40,
-  0x7C50,
-  0x7C58,
-  0x7C5F,
-  0x7C64,
-  0x7C56,
-  0x7C65,
-  0x7C6C,
-  0x7C75,
-  0x7C83,
-  0x7C90,
-  0x7CA4,
-  0x7CAD,
-  0x7CA2,
-  0x7CAB,
-  0x7CA1,
-  0x7CA8,
-  0x7CB3,
-  0x7CB2,
-  0x7CB1,
-  0x7CAE,
-  0x7CB9,
-  0x7CBD,
-  0x7CC0,
-  0x7CC5,
-  0x7CC2,
-  0x7CD8,
-  0x7CD2,
-  0x7CDC,
-  0x7CE2,
-  0x9B3B,
-  0x7CEF,
-  0x7CF2,
-  0x7CF4,
-  0x7CF6,
-  0x7CFA,
-  0x7D06,
-  0x7D02,
-  0x7D1C,
-  0x7D15,
-  0x7D0A,
-  0x7D45,
-  0x7D4B,
-  0x7D2E,
-  0x7D32,
-  0x7D3F,
-  0x7D35,
-  0x7D46,
-  0x7D73,
-  0x7D56,
-  0x7D4E,
-  0x7D72,
-  0x7D68,
-  0x7D6E,
-  0x7D4F,
-  0x7D63,
-  0x7D93,
-  0x7D89,
-  0x7D5B,
-  0x7D8F,
-  0x7D7D,
-  0x7D9B,
-  0x7DBA,
-  0x7DAE,
-  0x7DA3,
-  0x7DB5,
-  0x7DC7,
-  0x7DBD,
-  0x7DAB,
-  0x7E3D,
-  0x7DA2,
-  0x7DAF,
-  0x7DDC,
-  0x7DB8,
-  0x7D9F,
-  0x7DB0,
-  0x7DD8,
-  0x7DDD,
-  0x7DE4,
-  0x7DDE,
-  0x7DFB,
-  0x7DF2,
-  0x7DE1,
-  0x7E05,
-  0x7E0A,
-  0x7E23,
-  0x7E21,
-  0x7E12,
-  0x7E31,
-  0x7E1F,
-  0x7E09,
-  0x7E0B,
-  0x7E22,
-  0x7E46,
-  0x7E66,
-  0x7E3B,
-  0x7E35,
-  0x7E39,
-  0x7E43,
-  0x7E37,
-  0x7E32,
-  0x7E3A,
-  0x7E67,
-  0x7E5D,
-  0x7E56,
-  0x7E5E,
-  0x7E59,
-  0x7E5A,
-  0x7E79,
-  0x7E6A,
-  0x7E69,
-  0x7E7C,
-  0x7E7B,
-  0x7E83,
-  0x7DD5,
-  0x7E7D,
-  0x8FAE,
-  0x7E7F,
-  0x7E88,
-  0x7E89,
-  0x7E8C,
-  0x7E92,
-  0x7E90,
-  0x7E93,
-  0x7E94,
-  0x7E96,
-  0x7E8E,
-  0x7E9B,
-  0x7E9C,
-  0x7F38,
-  0x7F3A,
-  0x7F45,
-  0x7F4C,
-  0x7F4D,
-  0x7F4E,
-  0x7F50,
-  0x7F51,
-  0x7F55,
-  0x7F54,
-  0x7F58,
-  0x7F5F,
-  0x7F60,
-  0x7F68,
-  0x7F69,
-  0x7F67,
-  0x7F78,
-  0x7F82,
-  0x7F86,
-  0x7F83,
-  0x7F88,
-  0x7F87,
-  0x7F8C,
-  0x7F94,
-  0x7F9E,
-  0x7F9D,
-  0x7F9A,
-  0x7FA3,
-  0x7FAF,
-  0x7FB2,
-  0x7FB9,
-  0x7FAE,
-  0x7FB6,
-  0x7FB8,
-  0x8B71,
-  0x7FC5,
-  0x7FC6,
-  0x7FCA,
-  0x7FD5,
-  0x7FD4,
-  0x7FE1,
-  0x7FE6,
-  0x7FE9,
-  0x7FF3,
-  0x7FF9,
-  0x98DC,
-  0x8006,
-  0x8004,
-  0x800B,
-  0x8012,
-  0x8018,
-  0x8019,
-  0x801C,
-  0x8021,
-  0x8028,
-  0x803F,
-  0x803B,
-  0x804A,
-  0x8046,
-  0x8052,
-  0x8058,
-  0x805A,
-  0x805F,
-  0x8062,
-  0x8068,
-  0x8073,
-  0x8072,
-  0x8070,
-  0x8076,
-  0x8079,
-  0x807D,
-  0x807F,
-  0x8084,
-  0x8086,
-  0x8085,
-  0x809B,
-  0x8093,
-  0x809A,
-  0x80AD,
-  0x5190,
-  0x80AC,
-  0x80DB,
-  0x80E5,
-  0x80D9,
-  0x80DD,
-  0x80C4,
-  0x80DA,
-  0x80D6,
-  0x8109,
-  0x80EF,
-  0x80F1,
-  0x811B,
-  0x8129,
-  0x8123,
-  0x812F,
-  0x814B,
-  0x968B,
-  0x8146,
-  0x813E,
-  0x8153,
-  0x8151,
-  0x80FC,
-  0x8171,
-  0x816E,
-  0x8165,
-  0x8166,
-  0x8174,
-  0x8183,
-  0x8188,
-  0x818A,
-  0x8180,
-  0x8182,
-  0x81A0,
-  0x8195,
-  0x81A4,
-  0x81A3,
-  0x815F,
-  0x8193,
-  0x81A9,
-  0x81B0,
-  0x81B5,
-  0x81BE,
-  0x81B8,
-  0x81BD,
-  0x81C0,
-  0x81C2,
-  0x81BA,
-  0x81C9,
-  0x81CD,
-  0x81D1,
-  0x81D9,
-  0x81D8,
-  0x81C8,
-  0x81DA,
-  0x81DF,
-  0x81E0,
-  0x81E7,
-  0x81FA,
-  0x81FB,
-  0x81FE,
-  0x8201,
-  0x8202,
-  0x8205,
-  0x8207,
-  0x820A,
-  0x820D,
-  0x8210,
-  0x8216,
-  0x8229,
-  0x822B,
-  0x8238,
-  0x8233,
-  0x8240,
-  0x8259,
-  0x8258,
-  0x825D,
-  0x825A,
-  0x825F,
-  0x8264,
-  0x8262,
-  0x8268,
-  0x826A,
-  0x826B,
-  0x822E,
-  0x8271,
-  0x8277,
-  0x8278,
-  0x827E,
-  0x828D,
-  0x8292,
-  0x82AB,
-  0x829F,
-  0x82BB,
-  0x82AC,
-  0x82E1,
-  0x82E3,
-  0x82DF,
-  0x82D2,
-  0x82F4,
-  0x82F3,
-  0x82FA,
-  0x8393,
-  0x8303,
-  0x82FB,
-  0x82F9,
-  0x82DE,
-  0x8306,
-  0x82DC,
-  0x8309,
-  0x82D9,
-  0x8335,
-  0x8334,
-  0x8316,
-  0x8332,
-  0x8331,
-  0x8340,
-  0x8339,
-  0x8350,
-  0x8345,
-  0x832F,
-  0x832B,
-  0x8317,
-  0x8318,
-  0x8385,
-  0x839A,
-  0x83AA,
-  0x839F,
-  0x83A2,
-  0x8396,
-  0x8323,
-  0x838E,
-  0x8387,
-  0x838A,
-  0x837C,
-  0x83B5,
-  0x8373,
-  0x8375,
-  0x83A0,
-  0x8389,
-  0x83A8,
-  0x83F4,
-  0x8413,
-  0x83EB,
-  0x83CE,
-  0x83FD,
-  0x8403,
-  0x83D8,
-  0x840B,
-  0x83C1,
-  0x83F7,
-  0x8407,
-  0x83E0,
-  0x83F2,
-  0x840D,
-  0x8422,
-  0x8420,
-  0x83BD,
-  0x8438,
-  0x8506,
-  0x83FB,
-  0x846D,
-  0x842A,
-  0x843C,
-  0x855A,
-  0x8484,
-  0x8477,
-  0x846B,
-  0x84AD,
-  0x846E,
-  0x8482,
-  0x8469,
-  0x8446,
-  0x842C,
-  0x846F,
-  0x8479,
-  0x8435,
-  0x84CA,
-  0x8462,
-  0x84B9,
-  0x84BF,
-  0x849F,
-  0x84D9,
-  0x84CD,
-  0x84BB,
-  0x84DA,
-  0x84D0,
-  0x84C1,
-  0x84C6,
-  0x84D6,
-  0x84A1,
-  0x8521,
-  0x84FF,
-  0x84F4,
-  0x8517,
-  0x8518,
-  0x852C,
-  0x851F,
-  0x8515,
-  0x8514,
-  0x84FC,
-  0x8540,
-  0x8563,
-  0x8558,
-  0x8548,
-  0x8541,
-  0x8602,
-  0x854B,
-  0x8555,
-  0x8580,
-  0x85A4,
-  0x8588,
-  0x8591,
-  0x858A,
-  0x85A8,
-  0x856D,
-  0x8594,
-  0x859B,
-  0x85EA,
-  0x8587,
-  0x859C,
-  0x8577,
-  0x857E,
-  0x8590,
-  0x85C9,
-  0x85BA,
-  0x85CF,
-  0x85B9,
-  0x85D0,
-  0x85D5,
-  0x85DD,
-  0x85E5,
-  0x85DC,
-  0x85F9,
-  0x860A,
-  0x8613,
-  0x860B,
-  0x85FE,
-  0x85FA,
-  0x8606,
-  0x8622,
-  0x861A,
-  0x8630,
-  0x863F,
-  0x864D,
-  0x4E55,
-  0x8654,
-  0x865F,
-  0x8667,
-  0x8671,
-  0x8693,
-  0x86A3,
-  0x86A9,
-  0x86AA,
-  0x868B,
-  0x868C,
-  0x86B6,
-  0x86AF,
-  0x86C4,
-  0x86C6,
-  0x86B0,
-  0x86C9,
-  0x8823,
-  0x86AB,
-  0x86D4,
-  0x86DE,
-  0x86E9,
-  0x86EC,
-  0x86DF,
-  0x86DB,
-  0x86EF,
-  0x8712,
-  0x8706,
-  0x8708,
-  0x8700,
-  0x8703,
-  0x86FB,
-  0x8711,
-  0x8709,
-  0x870D,
-  0x86F9,
-  0x870A,
-  0x8734,
-  0x873F,
-  0x8737,
-  0x873B,
-  0x8725,
-  0x8729,
-  0x871A,
-  0x8760,
-  0x875F,
-  0x8778,
-  0x874C,
-  0x874E,
-  0x8774,
-  0x8757,
-  0x8768,
-  0x876E,
-  0x8759,
-  0x8753,
-  0x8763,
-  0x876A,
-  0x8805,
-  0x87A2,
-  0x879F,
-  0x8782,
-  0x87AF,
-  0x87CB,
-  0x87BD,
-  0x87C0,
-  0x87D0,
-  0x96D6,
-  0x87AB,
-  0x87C4,
-  0x87B3,
-  0x87C7,
-  0x87C6,
-  0x87BB,
-  0x87EF,
-  0x87F2,
-  0x87E0,
-  0x880F,
-  0x880D,
-  0x87FE,
-  0x87F6,
-  0x87F7,
-  0x880E,
-  0x87D2,
-  0x8811,
-  0x8816,
-  0x8815,
-  0x8822,
-  0x8821,
-  0x8831,
-  0x8836,
-  0x8839,
-  0x8827,
-  0x883B,
-  0x8844,
-  0x8842,
-  0x8852,
-  0x8859,
-  0x885E,
-  0x8862,
-  0x886B,
-  0x8881,
-  0x887E,
-  0x889E,
-  0x8875,
-  0x887D,
-  0x88B5,
-  0x8872,
-  0x8882,
-  0x8897,
-  0x8892,
-  0x88AE,
-  0x8899,
-  0x88A2,
-  0x888D,
-  0x88A4,
-  0x88B0,
-  0x88BF,
-  0x88B1,
-  0x88C3,
-  0x88C4,
-  0x88D4,
-  0x88D8,
-  0x88D9,
-  0x88DD,
-  0x88F9,
-  0x8902,
-  0x88FC,
-  0x88F4,
-  0x88E8,
-  0x88F2,
-  0x8904,
-  0x890C,
-  0x890A,
-  0x8913,
-  0x8943,
-  0x891E,
-  0x8925,
-  0x892A,
-  0x892B,
-  0x8941,
-  0x8944,
-  0x893B,
-  0x8936,
-  0x8938,
-  0x894C,
-  0x891D,
-  0x8960,
-  0x895E,
-  0x8966,
-  0x8964,
-  0x896D,
-  0x896A,
-  0x896F,
-  0x8974,
-  0x8977,
-  0x897E,
-  0x8983,
-  0x8988,
-  0x898A,
-  0x8993,
-  0x8998,
-  0x89A1,
-  0x89A9,
-  0x89A6,
-  0x89AC,
-  0x89AF,
-  0x89B2,
-  0x89BA,
-  0x89BD,
-  0x89BF,
-  0x89C0,
-  0x89DA,
-  0x89DC,
-  0x89DD,
-  0x89E7,
-  0x89F4,
-  0x89F8,
-  0x8A03,
-  0x8A16,
-  0x8A10,
-  0x8A0C,
-  0x8A1B,
-  0x8A1D,
-  0x8A25,
-  0x8A36,
-  0x8A41,
-  0x8A5B,
-  0x8A52,
-  0x8A46,
-  0x8A48,
-  0x8A7C,
-  0x8A6D,
-  0x8A6C,
-  0x8A62,
-  0x8A85,
-  0x8A82,
-  0x8A84,
-  0x8AA8,
-  0x8AA1,
-  0x8A91,
-  0x8AA5,
-  0x8AA6,
-  0x8A9A,
-  0x8AA3,
-  0x8AC4,
-  0x8ACD,
-  0x8AC2,
-  0x8ADA,
-  0x8AEB,
-  0x8AF3,
-  0x8AE7,
-  0x8AE4,
-  0x8AF1,
-  0x8B14,
-  0x8AE0,
-  0x8AE2,
-  0x8AF7,
-  0x8ADE,
-  0x8ADB,
-  0x8B0C,
-  0x8B07,
-  0x8B1A,
-  0x8AE1,
-  0x8B16,
-  0x8B10,
-  0x8B17,
-  0x8B20,
-  0x8B33,
-  0x97AB,
-  0x8B26,
-  0x8B2B,
-  0x8B3E,
-  0x8B28,
-  0x8B41,
-  0x8B4C,
-  0x8B4F,
-  0x8B4E,
-  0x8B49,
-  0x8B56,
-  0x8B5B,
-  0x8B5A,
-  0x8B6B,
-  0x8B5F,
-  0x8B6C,
-  0x8B6F,
-  0x8B74,
-  0x8B7D,
-  0x8B80,
-  0x8B8C,
-  0x8B8E,
-  0x8B92,
-  0x8B93,
-  0x8B96,
-  0x8B99,
-  0x8B9A,
-  0x8C3A,
-  0x8C41,
-  0x8C3F,
-  0x8C48,
-  0x8C4C,
-  0x8C4E,
-  0x8C50,
-  0x8C55,
-  0x8C62,
-  0x8C6C,
-  0x8C78,
-  0x8C7A,
-  0x8C82,
-  0x8C89,
-  0x8C85,
-  0x8C8A,
-  0x8C8D,
-  0x8C8E,
-  0x8C94,
-  0x8C7C,
-  0x8C98,
-  0x621D,
-  0x8CAD,
-  0x8CAA,
-  0x8CBD,
-  0x8CB2,
-  0x8CB3,
-  0x8CAE,
-  0x8CB6,
-  0x8CC8,
-  0x8CC1,
-  0x8CE4,
-  0x8CE3,
-  0x8CDA,
-  0x8CFD,
-  0x8CFA,
-  0x8CFB,
-  0x8D04,
-  0x8D05,
-  0x8D0A,
-  0x8D07,
-  0x8D0F,
-  0x8D0D,
-  0x8D10,
-  0x9F4E,
-  0x8D13,
-  0x8CCD,
-  0x8D14,
-  0x8D16,
-  0x8D67,
-  0x8D6D,
-  0x8D71,
-  0x8D73,
-  0x8D81,
-  0x8D99,
-  0x8DC2,
-  0x8DBE,
-  0x8DBA,
-  0x8DCF,
-  0x8DDA,
-  0x8DD6,
-  0x8DCC,
-  0x8DDB,
-  0x8DCB,
-  0x8DEA,
-  0x8DEB,
-  0x8DDF,
-  0x8DE3,
-  0x8DFC,
-  0x8E08,
-  0x8E09,
-  0x8DFF,
-  0x8E1D,
-  0x8E1E,
-  0x8E10,
-  0x8E1F,
-  0x8E42,
-  0x8E35,
-  0x8E30,
-  0x8E34,
-  0x8E4A,
-  0x8E47,
-  0x8E49,
-  0x8E4C,
-  0x8E50,
-  0x8E48,
-  0x8E59,
-  0x8E64,
-  0x8E60,
-  0x8E2A,
-  0x8E63,
-  0x8E55,
-  0x8E76,
-  0x8E72,
-  0x8E7C,
-  0x8E81,
-  0x8E87,
-  0x8E85,
-  0x8E84,
-  0x8E8B,
-  0x8E8A,
-  0x8E93,
-  0x8E91,
-  0x8E94,
-  0x8E99,
-  0x8EAA,
-  0x8EA1,
-  0x8EAC,
-  0x8EB0,
-  0x8EC6,
-  0x8EB1,
-  0x8EBE,
-  0x8EC5,
-  0x8EC8,
-  0x8ECB,
-  0x8EDB,
-  0x8EE3,
-  0x8EFC,
-  0x8EFB,
-  0x8EEB,
-  0x8EFE,
-  0x8F0A,
-  0x8F05,
-  0x8F15,
-  0x8F12,
-  0x8F19,
-  0x8F13,
-  0x8F1C,
-  0x8F1F,
-  0x8F1B,
-  0x8F0C,
-  0x8F26,
-  0x8F33,
-  0x8F3B,
-  0x8F39,
-  0x8F45,
-  0x8F42,
-  0x8F3E,
-  0x8F4C,
-  0x8F49,
-  0x8F46,
-  0x8F4E,
-  0x8F57,
-  0x8F5C,
-  0x8F62,
-  0x8F63,
-  0x8F64,
-  0x8F9C,
-  0x8F9F,
-  0x8FA3,
-  0x8FAD,
-  0x8FAF,
-  0x8FB7,
-  0x8FDA,
-  0x8FE5,
-  0x8FE2,
-  0x8FEA,
-  0x8FEF,
-  0x9087,
-  0x8FF4,
-  0x9005,
-  0x8FF9,
-  0x8FFA,
-  0x9011,
-  0x9015,
-  0x9021,
-  0x900D,
-  0x901E,
-  0x9016,
-  0x900B,
-  0x9027,
-  0x9036,
-  0x9035,
-  0x9039,
-  0x8FF8,
-  0x904F,
-  0x9050,
-  0x9051,
-  0x9052,
-  0x900E,
-  0x9049,
-  0x903E,
-  0x9056,
-  0x9058,
-  0x905E,
-  0x9068,
-  0x906F,
-  0x9076,
-  0x96A8,
-  0x9072,
-  0x9082,
-  0x907D,
-  0x9081,
-  0x9080,
-  0x908A,
-  0x9089,
-  0x908F,
-  0x90A8,
-  0x90AF,
-  0x90B1,
-  0x90B5,
-  0x90E2,
-  0x90E4,
-  0x6248,
-  0x90DB,
-  0x9102,
-  0x9112,
-  0x9119,
-  0x9132,
-  0x9130,
-  0x914A,
-  0x9156,
-  0x9158,
-  0x9163,
-  0x9165,
-  0x9169,
-  0x9173,
-  0x9172,
-  0x918B,
-  0x9189,
-  0x9182,
-  0x91A2,
-  0x91AB,
-  0x91AF,
-  0x91AA,
-  0x91B5,
-  0x91B4,
-  0x91BA,
-  0x91C0,
-  0x91C1,
-  0x91C9,
-  0x91CB,
-  0x91D0,
-  0x91D6,
-  0x91DF,
-  0x91E1,
-  0x91DB,
-  0x91FC,
-  0x91F5,
-  0x91F6,
-  0x921E,
-  0x91FF,
-  0x9214,
-  0x922C,
-  0x9215,
-  0x9211,
-  0x925E,
-  0x9257,
-  0x9245,
-  0x9249,
-  0x9264,
-  0x9248,
-  0x9295,
-  0x923F,
-  0x924B,
-  0x9250,
-  0x929C,
-  0x9296,
-  0x9293,
-  0x929B,
-  0x925A,
-  0x92CF,
-  0x92B9,
-  0x92B7,
-  0x92E9,
-  0x930F,
-  0x92FA,
-  0x9344,
-  0x932E,
-  0x9319,
-  0x9322,
-  0x931A,
-  0x9323,
-  0x933A,
-  0x9335,
-  0x933B,
-  0x935C,
-  0x9360,
-  0x937C,
-  0x936E,
-  0x9356,
-  0x93B0,
-  0x93AC,
-  0x93AD,
-  0x9394,
-  0x93B9,
-  0x93D6,
-  0x93D7,
-  0x93E8,
-  0x93E5,
-  0x93D8,
-  0x93C3,
-  0x93DD,
-  0x93D0,
-  0x93C8,
-  0x93E4,
-  0x941A,
-  0x9414,
-  0x9413,
-  0x9403,
-  0x9407,
-  0x9410,
-  0x9436,
-  0x942B,
-  0x9435,
-  0x9421,
-  0x943A,
-  0x9441,
-  0x9452,
-  0x9444,
-  0x945B,
-  0x9460,
-  0x9462,
-  0x945E,
-  0x946A,
-  0x9229,
-  0x9470,
-  0x9475,
-  0x9477,
-  0x947D,
-  0x945A,
-  0x947C,
-  0x947E,
-  0x9481,
-  0x947F,
-  0x9582,
-  0x9587,
-  0x958A,
-  0x9594,
-  0x9596,
-  0x9598,
-  0x9599,
-  0x95A0,
-  0x95A8,
-  0x95A7,
-  0x95AD,
-  0x95BC,
-  0x95BB,
-  0x95B9,
-  0x95BE,
-  0x95CA,
-  0x6FF6,
-  0x95C3,
-  0x95CD,
-  0x95CC,
-  0x95D5,
-  0x95D4,
-  0x95D6,
-  0x95DC,
-  0x95E1,
-  0x95E5,
-  0x95E2,
-  0x9621,
-  0x9628,
-  0x962E,
-  0x962F,
-  0x9642,
-  0x964C,
-  0x964F,
-  0x964B,
-  0x9677,
-  0x965C,
-  0x965E,
-  0x965D,
-  0x965F,
-  0x9666,
-  0x9672,
-  0x966C,
-  0x968D,
-  0x9698,
-  0x9695,
-  0x9697,
-  0x96AA,
-  0x96A7,
-  0x96B1,
-  0x96B2,
-  0x96B0,
-  0x96B4,
-  0x96B6,
-  0x96B8,
-  0x96B9,
-  0x96CE,
-  0x96CB,
-  0x96C9,
-  0x96CD,
-  0x894D,
-  0x96DC,
-  0x970D,
-  0x96D5,
-  0x96F9,
-  0x9704,
-  0x9706,
-  0x9708,
-  0x9713,
-  0x970E,
-  0x9711,
-  0x970F,
-  0x9716,
-  0x9719,
-  0x9724,
-  0x972A,
-  0x9730,
-  0x9739,
-  0x973D,
-  0x973E,
-  0x9744,
-  0x9746,
-  0x9748,
-  0x9742,
-  0x9749,
-  0x975C,
-  0x9760,
-  0x9764,
-  0x9766,
-  0x9768,
-  0x52D2,
-  0x976B,
-  0x9771,
-  0x9779,
-  0x9785,
-  0x977C,
-  0x9781,
-  0x977A,
-  0x9786,
-  0x978B,
-  0x978F,
-  0x9790,
-  0x979C,
-  0x97A8,
-  0x97A6,
-  0x97A3,
-  0x97B3,
-  0x97B4,
-  0x97C3,
-  0x97C6,
-  0x97C8,
-  0x97CB,
-  0x97DC,
-  0x97ED,
-  0x9F4F,
-  0x97F2,
-  0x7ADF,
-  0x97F6,
-  0x97F5,
-  0x980F,
-  0x980C,
-  0x9838,
-  0x9824,
-  0x9821,
-  0x9837,
-  0x983D,
-  0x9846,
-  0x984F,
-  0x984B,
-  0x986B,
-  0x986F,
-  0x9870,
-  0x9871,
-  0x9874,
-  0x9873,
-  0x98AA,
-  0x98AF,
-  0x98B1,
-  0x98B6,
-  0x98C4,
-  0x98C3,
-  0x98C6,
-  0x98E9,
-  0x98EB,
-  0x9903,
-  0x9909,
-  0x9912,
-  0x9914,
-  0x9918,
-  0x9921,
-  0x991D,
-  0x991E,
-  0x9924,
-  0x9920,
-  0x992C,
-  0x992E,
-  0x993D,
-  0x993E,
-  0x9942,
-  0x9949,
-  0x9945,
-  0x9950,
-  0x994B,
-  0x9951,
-  0x9952,
-  0x994C,
-  0x9955,
-  0x9997,
-  0x9998,
-  0x99A5,
-  0x99AD,
-  0x99AE,
-  0x99BC,
-  0x99DF,
-  0x99DB,
-  0x99DD,
-  0x99D8,
-  0x99D1,
-  0x99ED,
-  0x99EE,
-  0x99F1,
-  0x99F2,
-  0x99FB,
-  0x99F8,
-  0x9A01,
-  0x9A0F,
-  0x9A05,
-  0x99E2,
-  0x9A19,
-  0x9A2B,
-  0x9A37,
-  0x9A45,
-  0x9A42,
-  0x9A40,
-  0x9A43,
-  0x9A3E,
-  0x9A55,
-  0x9A4D,
-  0x9A5B,
-  0x9A57,
-  0x9A5F,
-  0x9A62,
-  0x9A65,
-  0x9A64,
-  0x9A69,
-  0x9A6B,
-  0x9A6A,
-  0x9AAD,
-  0x9AB0,
-  0x9ABC,
-  0x9AC0,
-  0x9ACF,
-  0x9AD1,
-  0x9AD3,
-  0x9AD4,
-  0x9ADE,
-  0x9ADF,
-  0x9AE2,
-  0x9AE3,
-  0x9AE6,
-  0x9AEF,
-  0x9AEB,
-  0x9AEE,
-  0x9AF4,
-  0x9AF1,
-  0x9AF7,
-  0x9AFB,
-  0x9B06,
-  0x9B18,
-  0x9B1A,
-  0x9B1F,
-  0x9B22,
-  0x9B23,
-  0x9B25,
-  0x9B27,
-  0x9B28,
-  0x9B29,
-  0x9B2A,
-  0x9B2E,
-  0x9B2F,
-  0x9B32,
-  0x9B44,
-  0x9B43,
-  0x9B4F,
-  0x9B4D,
-  0x9B4E,
-  0x9B51,
-  0x9B58,
-  0x9B74,
-  0x9B93,
-  0x9B83,
-  0x9B91,
-  0x9B96,
-  0x9B97,
-  0x9B9F,
-  0x9BA0,
-  0x9BA8,
-  0x9BB4,
-  0x9BC0,
-  0x9BCA,
-  0x9BB9,
-  0x9BC6,
-  0x9BCF,
-  0x9BD1,
-  0x9BD2,
-  0x9BE3,
-  0x9BE2,
-  0x9BE4,
-  0x9BD4,
-  0x9BE1,
-  0x9C3A,
-  0x9BF2,
-  0x9BF1,
-  0x9BF0,
-  0x9C15,
-  0x9C14,
-  0x9C09,
-  0x9C13,
-  0x9C0C,
-  0x9C06,
-  0x9C08,
-  0x9C12,
-  0x9C0A,
-  0x9C04,
-  0x9C2E,
-  0x9C1B,
-  0x9C25,
-  0x9C24,
-  0x9C21,
-  0x9C30,
-  0x9C47,
-  0x9C32,
-  0x9C46,
-  0x9C3E,
-  0x9C5A,
-  0x9C60,
-  0x9C67,
-  0x9C76,
-  0x9C78,
-  0x9CE7,
-  0x9CEC,
-  0x9CF0,
-  0x9D09,
-  0x9D08,
-  0x9CEB,
-  0x9D03,
-  0x9D06,
-  0x9D2A,
-  0x9D26,
-  0x9DAF,
-  0x9D23,
-  0x9D1F,
-  0x9D44,
-  0x9D15,
-  0x9D12,
-  0x9D41,
-  0x9D3F,
-  0x9D3E,
-  0x9D46,
-  0x9D48,
-  0x9D5D,
-  0x9D5E,
-  0x9D64,
-  0x9D51,
-  0x9D50,
-  0x9D59,
-  0x9D72,
-  0x9D89,
-  0x9D87,
-  0x9DAB,
-  0x9D6F,
-  0x9D7A,
-  0x9D9A,
-  0x9DA4,
-  0x9DA9,
-  0x9DB2,
-  0x9DC4,
-  0x9DC1,
-  0x9DBB,
-  0x9DB8,
-  0x9DBA,
-  0x9DC6,
-  0x9DCF,
-  0x9DC2,
-  0x9DD9,
-  0x9DD3,
-  0x9DF8,
-  0x9DE6,
-  0x9DED,
-  0x9DEF,
-  0x9DFD,
-  0x9E1A,
-  0x9E1B,
-  0x9E1E,
-  0x9E75,
-  0x9E79,
-  0x9E7D,
-  0x9E81,
-  0x9E88,
-  0x9E8B,
-  0x9E8C,
-  0x9E92,
-  0x9E95,
-  0x9E91,
-  0x9E9D,
-  0x9EA5,
-  0x9EA9,
-  0x9EB8,
-  0x9EAA,
-  0x9EAD,
-  0x9761,
-  0x9ECC,
-  0x9ECE,
-  0x9ECF,
-  0x9ED0,
-  0x9ED4,
-  0x9EDC,
-  0x9EDE,
-  0x9EDD,
-  0x9EE0,
-  0x9EE5,
-  0x9EE8,
-  0x9EEF,
-  0x9EF4,
-  0x9EF6,
-  0x9EF7,
-  0x9EF9,
-  0x9EFB,
-  0x9EFC,
-  0x9EFD,
-  0x9F07,
-  0x9F08,
-  0x76B7,
-  0x9F15,
-  0x9F21,
-  0x9F2C,
-  0x9F3E,
-  0x9F4A,
-  0x9F52,
-  0x9F54,
-  0x9F63,
-  0x9F5F,
-  0x9F60,
-  0x9F61,
-  0x9F66,
-  0x9F67,
-  0x9F6C,
-  0x9F6A,
-  0x9F77,
-  0x9F72,
-  0x9F76,
-  0x9F95,
-  0x9F9C,
-  0x9FA0,
-  0x582F,
-  0x69C7,
-  0x9059,
-  0x7464,
-  0x51DC,
-  0x7199
-};
-
-/* f5 to fe is non-existent */
diff --git a/newlib/libc/ctype/local.h b/newlib/libc/ctype/local.h
deleted file mode 100644
index b1eca42e6..000000000
--- a/newlib/libc/ctype/local.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* wctrans constants */
-
-#include <_ansi.h>
-
-/* valid values for wctrans_t */
-#define WCT_TOLOWER 1
-#define WCT_TOUPPER 2
-
-/* valid values for wctype_t */
-#define WC_ALNUM	1
-#define WC_ALPHA	2
-#define WC_BLANK	3
-#define WC_CNTRL	4
-#define WC_DIGIT	5
-#define WC_GRAPH	6
-#define WC_LOWER	7
-#define WC_PRINT	8
-#define WC_PUNCT	9
-#define WC_SPACE	10
-#define WC_UPPER	11
-#define WC_XDIGIT	12
-
-extern char __lc_ctype[12];
-
-/* Japanese encoding types supported */
-#define JP_JIS		1
-#define JP_SJIS		2
-#define JP_EUCJP	3
-
-/* internal function to translate JP to Unicode */
-wint_t _EXFUN (__jp2uc, (wint_t, int));
-
diff --git a/newlib/libc/ctype/toascii.c b/newlib/libc/ctype/toascii.c
deleted file mode 100644
index 4506f355d..000000000
--- a/newlib/libc/ctype/toascii.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
-FUNCTION
-	<<toascii>>---force integers to ASCII range
-
-INDEX
-	toascii
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int toascii(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int toascii(<[c]>);
-	int (<[c]>);
-
-DESCRIPTION
-<<toascii>> is a macro which coerces integers to the ASCII range (0--127) by zeroing any higher-order bits.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining this macro using `<<#undef toascii>>'.
-
-RETURNS
-<<toascii>> returns integers between 0 and 127.
-
-PORTABILITY
-<<toascii>> is not ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-#undef toascii
-
-int
-_DEFUN(toascii,(c),int c)
-{
-  return (c)&0177;
-}
-
diff --git a/newlib/libc/ctype/tolower.c b/newlib/libc/ctype/tolower.c
deleted file mode 100644
index e43fa6c9d..000000000
--- a/newlib/libc/ctype/tolower.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-FUNCTION
-	<<tolower>>---translate characters to lower case
-
-INDEX
-	tolower
-INDEX
-	_tolower
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int tolower(int <[c]>);
-	int _tolower(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int tolower(<[c]>);
-	int _tolower(<[c]>);
-
-
-DESCRIPTION
-<<tolower>> is a macro which converts upper-case characters to lower
-case, leaving all other characters unchanged.  It is only defined when
-<[c]> is an integer in the range <<EOF>> to <<255>>.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining this macro using `<<#undef tolower>>'.
-
-<<_tolower>> performs the same conversion as <<tolower>>, but should
-only be used when <[c]> is known to be an uppercase character (<<A>>--<<Z>>).
-
-RETURNS
-<<tolower>> returns the lower-case equivalent of <[c]> when it is a
-character between <<A>> and <<Z>>, and <[c]> otherwise.
-
-<<_tolower>> returns the lower-case equivalent of <[c]> when it is a
-character between <<A>> and <<Z>>.  If <[c]> is not one of these
-characters, the behaviour of <<_tolower>> is undefined.
-
-PORTABILITY
-<<tolower>> is ANSI C.  <<_tolower>> is not recommended for portable
-programs.
-
-No supporting OS subroutines are required.
-*/ 
-
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef tolower
-int
-_DEFUN(tolower,(c),int c)
-{
-	return isupper(c) ? (c) - 'A' + 'a' : c;
-}
diff --git a/newlib/libc/ctype/toupper.c b/newlib/libc/ctype/toupper.c
deleted file mode 100644
index 7977beb79..000000000
--- a/newlib/libc/ctype/toupper.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-FUNCTION
-	<<toupper>>---translate characters to upper case
-
-INDEX
-	toupper
-INDEX
-	_toupper
-
-ANSI_SYNOPSIS
-	#include <ctype.h>
-	int toupper(int <[c]>);
-	int _toupper(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <ctype.h>
-	int toupper(<[c]>);
-	int _toupper(<[c]>);
-
-
-DESCRIPTION
-<<toupper>> is a macro which converts lower-case characters to upper
-case, leaving all other characters unchanged.  It is only defined when
-<[c]> is an integer in the range <<EOF>> to <<255>>.
-
-You can use a compiled subroutine instead of the macro definition by
-undefining this macro using `<<#undef toupper>>'.
-
-<<_toupper>> performs the same conversion as <<toupper>>, but should
-only be used when <[c]> is known to be a lowercase character (<<a>>--<<z>>).
-
-RETURNS
-<<toupper>> returns the upper-case equivalent of <[c]> when it is a
-character between <<a>> and <<z>>, and <[c]> otherwise.
-
-<<_toupper>> returns the upper-case equivalent of <[c]> when it is a
-character between <<a>> and <<z>>.  If <[c]> is not one of these
-characters, the behaviour of <<_toupper>> is undefined.
-
-PORTABILITY
-<<toupper>> is ANSI C.  <<_toupper>> is not recommended for portable programs.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <ctype.h>
-
-#undef toupper
-int
-_DEFUN(toupper,(c),int c)
-{
-  return islower(c) ? c - 'a' + 'A' : c;
-}
diff --git a/newlib/libc/ctype/towctrans.c b/newlib/libc/ctype/towctrans.c
deleted file mode 100644
index cf2162670..000000000
--- a/newlib/libc/ctype/towctrans.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<towctrans>>---extensible wide-character case mapping
-
-INDEX
-	towctrans
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	wint_t towctrans(wint_t <[c]>, wctrans_t <[w]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	wint_t towctrans(<[c]>, <[w]>)
-	wint_t <[c]>;
-	wctrans_t <[w]>;
-
-
-DESCRIPTION
-<<towctrans>> is a function which converts wide-characters based on
-a specified translation type <[w]>.  If the translation type is
-invalid or cannot be applied to the current character, no change
-to the character is made.
-
-RETURNS
-<<towctrans>> returns the translated equivalent of <[c]> when it is a
-valid for the given translation, otherwise, it returns the input character.
-When the translation type is invalid, <<errno>> is set <<EINVAL>>.
-
-PORTABILITY
-<<towctrans>> is C99.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <reent.h>
-#include <wctype.h>
-#include <errno.h>
-#include "local.h"
-
-wint_t
-_DEFUN (_towctrans_r, (r, c, w), 
-	struct _reent *r _AND
-	wint_t c _AND 
-	wctrans_t w)
-{
-  if (w == WCT_TOLOWER)
-    return towlower (c);
-  else if (w == WCT_TOUPPER)
-    return towupper (c);
-  else
-    {
-      r->_errno = EINVAL;
-      return c;
-    }
-}
-
-#ifndef _REENT_ONLY
-wint_t
-_DEFUN (towctrans, (c, w),
-	wint_t c _AND
-        wctrans_t w)
-{
-  return _towctrans_r (_REENT, c, w);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/ctype/towlower.c b/newlib/libc/ctype/towlower.c
deleted file mode 100644
index a0b03b8c5..000000000
--- a/newlib/libc/ctype/towlower.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<towlower>>---translate wide-characters to lower case
-
-INDEX
-	towlower
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	wint_t towlower(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	wint_t towlower(<[c]>)
-	wint_t <[c]>;
-
-
-DESCRIPTION
-<<towlower>> is a function which converts upper-case wide-characters to lower
-case, leaving all other characters unchanged.
-
-RETURNS
-<<towlower>> returns the lower-case equivalent of <[c]> when it is a
-upper-case wide-character, otherwise, it returns the input character.
-
-PORTABILITY
-<<towlower>> is C99.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <reent.h>
-#include <ctype.h>
-#include <wctype.h>
-#include "local.h"
-
-wint_t
-_DEFUN(towlower,(c), wint_t c)
-{
-  int unicode = 0;
-
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      if (c < 0x100)
-	{
-	  if ((c >= 0x0041 && c <= 0x005a) ||
-	      (c >= 0x00c0 && c <= 0x00de))
-	    return (c + 0x20);
-
-	  if (c == 0x00b5)
-	    return 0x03bc;
-	  
-	  return c;
-	}
-      else if (c < 0x300)
-	{
-	  if ((c >= 0x0100 && c <= 0x012e) ||
-	      (c >= 0x0132 && c <= 0x0136) ||
-	      (c >= 0x014a && c <= 0x0176) ||
-	      (c >= 0x01de && c <= 0x01ee) ||
-	      (c >= 0x01f8 && c <= 0x021e) ||
-	      (c >= 0x0222 && c <= 0x0232))
-	    {
-	      if (!(c & 0x01))
-		return (c + 1);
-	      return c;
-	    }
-
-	  if ((c >= 0x0139 && c <= 0x0147) ||
-	      (c >= 0x01cd && c <= 0x91db))
-	    {
-	      if (c & 0x01)
-		return (c + 1);
-	      return c;
-	    }
-	  
-	  if (c >= 0x178 && c <= 0x01f7)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x0178:
-		  k = 0x00ff;
-		  break;
-		case 0x0179:
-		case 0x017b:
-		case 0x017d:
-		case 0x0182:
-		case 0x0184:
-		case 0x0187:
-		case 0x018b:
-		case 0x0191:
-		case 0x0198:
-		case 0x01a0:
-		case 0x01a2:
-		case 0x01a4:
-		case 0x01a7:
-		case 0x01ac:
-		case 0x01af:
-		case 0x01b3:
-		case 0x01b5:
-		case 0x01b8:
-		case 0x01bc:
-		case 0x01c5:
-		case 0x01c8:
-		case 0x01cb:
-		case 0x01cd:
-		case 0x01cf:
-		case 0x01d1:
-		case 0x01d3:
-		case 0x01d5:
-		case 0x01d7:
-		case 0x01d9:
-		case 0x01db:
-		case 0x01f2:
-		case 0x01f4:
-		  k = c + 1;
-		  break;
-		case 0x017f:
-		  k = 0x0073;
-		  break;
-		case 0x0181:
-		  k = 0x0253;
-		  break;
-		case 0x0186:
-		  k = 0x0254;
-		  break;
-		case 0x0189:
-		  k = 0x0256;
-		  break;
-		case 0x018a:
-		  k = 0x0257;
-		  break;
-		case 0x018e:
-		  k = 0x01dd;
-		  break;
-		case 0x018f:
-		  k = 0x0259;
-		  break;
-		case 0x0190:
-		  k = 0x025b;
-		  break;
-		case 0x0193:
-		  k = 0x0260;
-		  break;
-		case 0x0194:
-		  k = 0x0263;
-		  break;
-		case 0x0196:
-		  k = 0x0269;
-		  break;
-		case 0x0197:
-		  k = 0x0268;
-		  break;
-		case 0x019c:
-		  k = 0x026f;
-		  break;
-		case 0x019d:
-		  k = 0x0272;
-		  break;
-		case 0x019f:
-		  k = 0x0275;
-		  break;
-		case 0x01a6:
-		  k = 0x0280;
-		  break;
-		case 0x01a9:
-		  k = 0x0283;
-		  break;
-		case 0x01ae:
-		  k = 0x0288;
-		  break;
-		case 0x01b1:
-		  k = 0x028a;
-		  break;
-		case 0x01b2:
-		  k = 0x028b;
-		  break;
-		case 0x01b7:
-		  k = 0x0292;
-		  break;
-		case 0x01c4:
-		case 0x01c7:
-		case 0x01ca:
-		case 0x01f1:
-		  k = c + 2;
-		  break;
-		case 0x01f6:
-		  k = 0x0195;
-		  break;
-		case 0x01f7:
-		  k = 0x01bf;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-
-	  if (c == 0x0220)
-	    return 0x019e;
-	}
-      else if (c < 0x0400)
-	{
-	  if (c >= 0x0391 && c <= 0x03ab && c != 0x03a2)
-	    return (c + 0x20);
-	  if (c >= 0x03d8 && c <= 0x03ee && !(c & 0x01))
-	    return (c + 1);
-	  if (c >= 0x0386 && c <= 0x03f5)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x0386:
-		  k = 0x03ac;
-		  break;
-		case 0x0388:
-		  k = 0x03ad;
-		  break;
-		case 0x0389:
-		  k = 0x03ae;
-		  break;
-		case 0x038a:
-		  k = 0x03af;
-		  break;
-		case 0x038c:
-		  k = 0x03cc;
-		  break;
-		case 0x038e:
-		  k = 0x03cd;
-		  break;
-		case 0x038f:
-		  k = 0x038f;
-		  break;
-		case 0x03c2:
-		  k = 0x03c3;
-		  break;
-		case 0x03d0:
-		  k = 0x03b2;
-		  break;
-		case 0x03d1:
-		  k = 0x03b8;
-		  break;
-		case 0x03d5:
-		  k = 0x03c6;
-		  break;
-		case 0x03d6:
-		  k = 0x03c0;
-		  break;
-		case 0x03f0:
-		  k = 0x03ba;
-		  break;
-		case 0x03f1:
-		  k = 0x03c1;
-		  break;
-		case 0x03f2:
-		  k = 0x03c3;
-		  break;
-		case 0x03f4:
-		  k = 0x03b8;
-		  break;
-		case 0x03f5:
-		  k = 0x03b5;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-
-	  if (c == 0x0345)
-	    return 0x03b9;
-	}
-      else if (c < 0x500)
-	{
-	  if (c >= 0x0400 && c <= 0x040f)
-	    return (c + 0x50);
-	  
-	  if (c >= 0x0410 && c <= 0x042f)
-	    return (c + 0x20);
-	  
-	  if ((c >= 0x0460 && c <= 0x0480) ||
-	      (c >= 0x048a && c <= 0x04be) ||
-	      (c >= 0x04d0 && c <= 0x04f4) ||
-	      (c == 0x04f8))
-	    {
-	      if (!(c & 0x01))
-		return (c + 1);
-	      return c;
-	    }
-	  
-	  if (c >= 0x04c1 && c <= 0x04cd)
-	    {
-	      if (c & 0x01)
-		return (c + 1);
-	      return c;
-	    }
-	}
-      else if (c < 0x1f00)
-	{
-	  if ((c >= 0x0500 && c <= 0x050e) ||
-	      (c >= 0x1e00 && c <= 0x1e94) ||
-	      (c >= 0x1ea0 && c <= 0x1ef8))
-	    {
-	      if (!(c & 0x01))
-		return (c + 1);
-	      return c;
-	    }
-	  
-	  if (c >= 0x0531 && c <= 0x0556)
-	    return (c + 0x30);
-
-	  if (c == 0x1e9b)
-	    return 0x1e61;
-	}
-      else if (c < 0x2000)
-	{
-	  if ((c >= 0x1f08 && c <= 0x1f0f) ||
-	      (c >= 0x1f18 && c <= 0x1f1d) ||
-	      (c >= 0x1f28 && c <= 0x1f2f) ||
-	      (c >= 0x1f38 && c <= 0x1f3f) ||
-	      (c >= 0x1f48 && c <= 0x1f4d) ||
-	      (c >= 0x1f68 && c <= 0x1f6f) ||
-	      (c >= 0x1f88 && c <= 0x1f8f) ||
-	      (c >= 0x1f98 && c <= 0x1f9f) ||
-	      (c >= 0x1fa8 && c <= 0x1faf))
-	    return (c - 0x08);
-
-	  if (c >= 0x1f59 && c <= 0x1f5f)
-	    {
-	      if (c & 0x01)
-		return (c - 0x08);
-	      return c;
-	    }
-	
-	  if (c >= 0x1fb8 && c <= 0x1ffc)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x1fb8:
-		case 0x1fb9:
-		case 0x1fd8:
-		case 0x1fd9:
-		case 0x1fe8:
-		case 0x1fe9:
-		  k = c - 0x08;
-		  break;
-		case 0x1fba:
-		case 0x1fbb:
-		  k = c - 0x4a;
-		  break;
-		case 0x1fbc:
-		  k = 0x1fb3;
-		  break;
-		case 0x1fbe:
-		  k = 0x03b9;
-		  break;
-		case 0x1fc8:
-		case 0x1fc9:
-		case 0x1fca:
-		case 0x1fcb:
-		  k = c - 0x56;
-		  break;
-		case 0x1fcc:
-		  k = 0x1fc3;
-		  break;
-		case 0x1fda:
-		case 0x1fdb:
-		  k = c - 0x64;
-		  break;
-		case 0x1fea:
-		case 0x1feb:
-		  k = c - 0x70;
-		  break;
-		case 0x1fec:
-		  k = 0x1fe5;
-		  break;
-		case 0x1ffa:
-		case 0x1ffb:
-		  k = c - 0x7e;
-		  break;
-		case 0x1ffc:
-		  k = 0x1ff3;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-	}
-      else 
-	{
-	  if (c >= 0x2160 && c <= 0x216f)
-	    return (c + 0x10);
-	  
-	  if (c >= 0x24b6 && c <= 0x24cf)
-	    return (c + 0x1a);
-	  
-	  if (c >= 0xff21 && c <= 0xff3a)
-	    return (c + 0x20);
-	  
-	  if (c >= 0x10400 && c <= 0x10425)
-	    return (c + 0x28);
-
-	  if (c == 0x2126)
-	    return 0x03c9;
-	  if (c == 0x212a)
-	    return 0x006b;
-	  if (c == 0x212b)
-	    return 0x00e5;
-	}
-    }     
-#endif /* MB_CAPABLE */
-  
-  return (c < 0x00ff ? (wint_t)(tolower ((int)c)) : c);
-}
-
diff --git a/newlib/libc/ctype/towupper.c b/newlib/libc/ctype/towupper.c
deleted file mode 100644
index b14e5aa07..000000000
--- a/newlib/libc/ctype/towupper.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<towupper>>---translate wide-characters to upper case
-
-INDEX
-	towupper
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	wint_t towupper(wint_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	wint_t towupper(<[c]>)
-	wint_t <[c]>;
-
-
-DESCRIPTION
-<<towupper>> is a function which converts lower-case wide-characters to upper
-case, leaving all other characters unchanged.
-
-RETURNS
-<<towupper>> returns the upper-case equivalent of <[c]> when it is a
-lower-case wide-character, otherwise, it returns the input character.
-
-PORTABILITY
-<<towupper>> is C99.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <reent.h>
-#include <ctype.h>
-#include <wctype.h>
-#include "local.h"
-
-wint_t
-_DEFUN(towupper,(c), wint_t c)
-{
-  int unicode = 0;
-
-  if (__lc_ctype[0] == 'C' && __lc_ctype[1] == '\0')
-    {
-      unicode = 0;
-      /* fall-through */ 
-    }
-#ifdef MB_CAPABLE
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      c = __jp2uc (c, JP_JIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      c = __jp2uc (c, JP_SJIS);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      c = __jp2uc (c, JP_EUCJP);
-      unicode = 1;
-    }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      unicode = 1;
-    }
-
-  if (unicode)
-    {
-      if (c < 0x100)
-	{
-	  if (c == 0x00b5)
-	    return 0x039c;
-	  
-	  if ((c >= 0x00e0 && c <= 0x00fe) ||
-	      (c >= 0x0061 && c <= 0x007a))
-	    return (c - 0x20);
-	  
-	  if (c == 0xff)
-	    return 0x0178;
-	  
-	  return c;
-	}
-      else if (c < 0x300)
-	{
-	  if ((c >= 0x0101 && c <= 0x012f) ||
-	      (c >= 0x0133 && c <= 0x0137) ||
-	      (c >= 0x014b && c <= 0x0177) ||
-	      (c >= 0x01df && c <= 0x01ef) ||
-	      (c >= 0x01f9 && c <= 0x021f) ||
-	      (c >= 0x0223 && c <= 0x0233))
-	    {
-	      if (c & 0x01)
-		return (c - 1);
-	      return c;
-	    }
-
-	  if ((c >= 0x013a && c <= 0x0148) ||
-	      (c >= 0x01ce && c <= 0x1dc))
-	    {
-	      if (!(c & 0x01))
-		return (c - 1);
-	      return c;
-	    }
-	  
-	  if (c == 0x0131)
-	    return 0x0049;
-	  
-	  if (c == 0x017a || c == 0x017c || c == 0x017e)
-	    return (c - 1);
-	  
-	  if (c >= 0x017f && c <= 0x0292)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x017f:
-		  k = 0x0053;
-		  break;
-		case 0x0183:
-		  k = 0x0182;
-		  break;
-		case 0x0185:
-		  k = 0x0184;
-		  break;
-		case 0x0188:
-		  k = 0x0187;
-		  break;
-		case 0x018c:
-		  k = 0x018b;
-		  break;
-		case 0x0192:
-		  k = 0x0191;
-		  break;
-		case 0x0195:
-		  k = 0x01f6;
-		  break;
-		case 0x0199:
-		  k = 0x0198;
-		  break;
-		case 0x019e:
-		  k = 0x0220;
-		  break;
-		case 0x01a1:
-		case 0x01a3:
-		case 0x01a5:
-		case 0x01a8:
-		case 0x01ad:
-		case 0x01b0:
-		case 0x01b4:
-		case 0x01b6:
-		case 0x01b9:
-		case 0x01bd:
-		case 0x01c5:
-		case 0x01c8:
-		case 0x01cb:
-		case 0x01f2:
-		case 0x01f5:
-		  k = c - 1;
-		  break;
-		case 0x01bf:
-		  k = 0x01f7;
-		  break;
-		case 0x01c6:
-		case 0x01c9:
-		case 0x01cc:
-		  k = c - 2;
-		  break;
-		case 0x01dd:
-		  k = 0x018e;
-		  break;
-		case 0x01f3:
-		  k = 0x01f1;
-		  break;
-		case 0x0253:
-		  k = 0x0181;
-		  break;
-		case 0x0254:
-		  k = 0x0186;
-		  break;
-		case 0x0256:
-		  k = 0x0189;
-		  break;
-		case 0x0257:
-		  k = 0x018a;
-		  break;
-		case 0x0259:
-		  k = 0x018f;
-		  break;
-		case 0x025b:
-		  k = 0x0190;
-		  break;
-		case 0x0260:
-		  k = 0x0193;
-		  break;
-		case 0x0263:
-		  k = 0x0194;
-		  break;
-		case 0x0268:
-		  k = 0x0197;
-		  break;
-		case 0x0269:
-		  k = 0x0196;
-		  break;
-		case 0x026f:
-		  k = 0x019c;
-		  break;
-		case 0x0272:
-		  k = 0x019d;
-		  break;
-		case 0x0275:
-		  k = 0x019f;
-		  break;
-		case 0x0280:
-		  k = 0x01a6;
-		  break;
-		case 0x0283:
-		  k = 0x01a9;
-		  break;
-		case 0x0288:
-		  k = 0x01ae;
-		  break;
-		case 0x028a:
-		  k = 0x01b1;
-		  break;
-		case 0x028b:
-		  k = 0x01b2;
-		  break;
-		case 0x0292:
-		  k = 0x01b7;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-	}
-      else if (c < 0x0400)
-	{
-	  if (c == 0x03ac)
-	    return 0x0386;
-	  
-	  if ((c & 0xfff0) == 0x03a0 && c >= 0x03ad)
-	    return (c - 0x15);
-	  
-	  if (c >= 0x03b1 && c <= 0x03cb && c != 0x03c2)
-	    return (c - 0x20);
-	  
-	  if (c == 0x03c2)
-	    return 0x03a3;
-	  
-	  if (c >= 0x03cc && c <= 0x03f5)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x03cc:
-		  k = 0x038c;
-		  break;
-		case 0x03cd:
-		case 0x03ce:
-		  k = c - 0x3f;
-		  break;
-		case 0x03d0:
-		  k = 0x0392;
-		  break;
-		case 0x03d1:
-		  k = 0x0398;
-		  break;
-		case 0x03d5:
-		  k = 0x03a6;
-		  break;
-		case 0x03d6:
-		  k = 0x03a0;
-		  break;
-		case 0x03d9:
-		case 0x03db:
-		case 0x03dd:
-		case 0x03df:
-		case 0x03e1:
-		case 0x03e3:
-		case 0x03e5:
-		case 0x03e7:
-		case 0x03e9:
-		case 0x03eb:
-		case 0x03ed:
-		case 0x03ef:
-		  k = c - 1;
-		  break;
-		case 0x03f0:
-		  k = 0x039a;
-		  break;
-		case 0x03f1:
-		  k = 0x03a1;
-		  break;
-		case 0x03f2:
-		  k = 0x03a3;
-		  break;
-		case 0x03f5:
-		  k = 0x0395;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-	}
-      else if (c < 0x500)
-	{
-	  if (c >= 0x0450 && c <= 0x045f)
-	    return (c - 0x50);
-	  
-	  if (c >= 0x0430 && c <= 0x044f)
-	    return (c - 0x20);
-	  
-	  if ((c >= 0x0461 && c <= 0x0481) ||
-	      (c >= 0x048b && c <= 0x04bf) ||
-	      (c >= 0x04d1 && c <= 0x04f5))
-	    {
-	      if (c & 0x01)
-		return (c - 1);
-	      return c;
-	    }
-	  
-	  if (c >= 0x04c2 && c <= 0x04ce)
-	    {
-	      if (!(c & 0x01))
-		return (c - 1);
-	      return c;
-	    }
-	  
-	  if (c == 0x04f9)
-	    return 0x04f8;
-	}
-      else if (c < 0x1f00)
-	{
-	  if ((c >= 0x0501 && c <= 0x050f) ||
-	      (c >= 0x1e01 && c <= 0x1e95) ||
-	      (c >= 0x1ea1 && c <= 0x1ef9))
-	    {
-	      if (c & 0x01)
-		return (c - 1);
-	      return c;
-	    }
-	  
-	  if (c >= 0x0561 && c <= 0x0586)
-	    return (c - 0x30);
-
-	  if (c == 0x1e9b)
-	    return 0x1e60;
-	}
-      else if (c < 0x2000)
-	{
-	  
-	  if ((c >= 0x1f00 && c <= 0x1f07) ||
-	      (c >= 0x1f10 && c <= 0x1f15) ||
-	      (c >= 0x1f20 && c <= 0x1f27) ||
-	      (c >= 0x1f30 && c <= 0x1f37) ||
-	      (c >= 0x1f40 && c <= 0x1f45) ||
-	      (c >= 0x1f60 && c <= 0x1f67) ||
-	      (c >= 0x1f80 && c <= 0x1f87) ||
-	      (c >= 0x1f90 && c <= 0x1f97) ||
-	      (c >= 0x1fa0 && c <= 0x1fa7))
-	    return (c + 0x08);
- 
-	  if (c >= 0x1f51 && c <= 0x1f57 && (c & 0x01))
-	    return (c + 0x08);
-	  
-	  if (c >= 0x1f70 && c <= 0x1ff3)
-	    {
-	      wint_t k;
-	      switch (c)
-		{
-		case 0x1fb0:
-		  k = 0x1fb8;
-		  break;
-		case 0x1fb1:
-		  k = 0x1fb9;
-		  break;
-		case 0x1f70:
-		  k = 0x1fba;
-		  break;
-		case 0x1f71:
-		  k = 0x1fbb;
-		  break;
-		case 0x1fb3:
-		  k = 0x1fbc;
-		  break;
-		case 0x1fbe:
-		  k = 0x0399;
-		  break;
-		case 0x1f72:
-		  k = 0x1fc8;
-		  break;
-		case 0x1f73:
-		  k = 0x1fc9;
-		  break;
-		case 0x1f74:
-		  k = 0x1fca;
-		  break;
-		case 0x1f75:
-		  k = 0x1fcb;
-		  break;
-		case 0x1fd0:
-		  k = 0x1fd8;
-		  break;
-		case 0x1fd1:
-		  k = 0x1fd9;
-		  break;
-		case 0x1f76:
-		  k = 0x1fda;
-		  break;
-		case 0x1f77:
-		  k = 0x1fdb;
-		  break;
-		case 0x1fe0:
-		  k = 0x1fe8;
-		  break;
-		case 0x1fe1:
-		  k = 0x1fe9;
-		  break;
-		case 0x1f7a:
-		  k = 0x1fea;
-		  break;
-		case 0x1f7b:
-		  k = 0x1feb;
-		  break;
-		case 0x1fe5:
-		  k = 0x1fec;
-		  break;
-		case 0x1f78:
-		  k = 0x1ff8;
-		  break;
-		case 0x1f79:
-		  k = 0x1ff9;
-		  break;
-		case 0x1f7c:
-		  k = 0x1ffa;
-		  break;
-		case 0x1f7d:
-		  k = 0x1ffb;
-		  break;
-		case 0x1ff3:
-		  k = 0x1ffc;
-		  break;
-		default:
-		  k = 0;
-		}
-	      if (k != 0)
-		return k;
-	    }
-	}
-      else 
-	{
-	  if (c >= 0x2170 && c <= 0x217f)
-	    return (c - 0x10);
-	  
-	  if (c >= 0x24d0 && c <= 0x24e9)
-	    return (c - 0x1a);
-	  
-	  if (c >= 0xff41 && c <= 0xff5a)
-	    return (c - 0x20);
-	  
-	  if (c >= 0x10428 && c <= 0x1044d)
-	    return (c - 0x28);
-	}
-    }     
-#endif /* MB_CAPABLE */
-  
-  return (c < 0x00ff ? (wint_t)(toupper ((int)c)) : c);
-}
-
diff --git a/newlib/libc/ctype/utf8alpha.h b/newlib/libc/ctype/utf8alpha.h
deleted file mode 100644
index c7ee160ae..000000000
--- a/newlib/libc/ctype/utf8alpha.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/* Generated using unicode.txt 3.2 */
-
-static const unsigned char u0[] = {
-  0x41, 0x0, 0x5a, 0x61, 0x0, 0x7a, 0xaa, 0xb5, 
-  0xba, 0xc0, 0x0, 0xd6, 0xd8, 0x0, 0xf6, 0xf8, 
-  0x0, 0xff };
-/* u1 all alphabetic */
-static const unsigned char u2[] = {
-  0x00, 0x0, 0x20, 0x22, 0x0, 0x33, 0x50, 0x0, 0xad, 
-  0xb0, 0x0, 0xb8, 0xbb, 0x0, 0xc1, 0xd0, 0x0, 
-  0xd1, 0xe0, 0x0, 0xe4, 0xee };
-static const unsigned char u3[] = {
-  0x45, 0x7a, 0x86, 
-  0x88, 0x0, 0x8a, 0x8c, 0x8e, 0x0, 0xa1, 0xa3, 
-  0x0, 0xce, 0xd0, 0x0, 0xf5 };
-static const unsigned char u4[] = { 
-  0x00, 0x0, 0x81, 
-  0x8a, 0x0, 0xce, 0xd0, 0x0, 0xf5, 0xf8, 0x0, 
-  0xf9 };
-static const unsigned char u5[] = { 
-  0x00, 0x0, 0x0f, 0x31, 0x0, 0x56, 0x59, 
-  0x61, 0x0, 0x87, 0xd0, 0x0, 0xea, 0xf0, 0x0, 
-  0xf2 };
-static const unsigned char u6[] = { 
-  0x21, 0x0, 0x3a, 
-  0x40, 0x0, 0x4a, 0x60, 
-  0x0, 0x69, 0x6e, 0x0, 0x6f, 0x71, 0x0, 0xd3, 
-  0xd5, 0xe5, 0x0, 0xe6, 0xf0, 0x0, 0xfc };
-static const unsigned char u7[] = { 
-  0x10, 
-  0x12, 0x0, 0x2c, 0x80, 0x0, 0xa5, 0xb1 };
-static const unsigned char u9[] = { 
-  0x05, 
-  0x0, 0x39, 0x3d, 0x50, 0x58, 0x0, 0x61, 0x66, 
-  0x0, 0x6f, 0x85, 0x0, 0x8c, 0x8f, 0x0, 0x90, 
-  0x93, 0x0, 0xa8, 0xaa, 0x0, 0xb0, 0xb2, 0xb6, 
-  0x0, 0xb9, 0xdc, 0x0, 0xdd, 0xdf, 0x0, 0xe1, 
-  0xe6, 0x0, 0xf1 };
-static const unsigned char ua[] = { 
-  0x05, 0x0, 0x0a, 0x0f, 0x0, 
-  0x10, 0x13, 0x0, 0x28, 0x2a, 0x0, 0x30, 0x32, 
-  0x0, 0x33, 0x35, 0x0, 0x36, 0x38, 0x0, 0x39, 
-  0x59, 0x0, 0x5c, 0x5e, 0x66, 0x0, 0x6f, 0x72, 
-  0x0, 0x74, 0x85, 0x0, 0x8b, 0x8d, 0x8f, 0x0, 
-  0x91, 0x93, 0x0, 0xa8, 0xaa, 0x0, 0xb0, 0xb2, 
-  0x0, 0xb3, 0xb5, 0x0, 0xb9, 0xbd, 0xd0, 0xe0, 
-  0xe6, 0x0, 0xef };
-static const unsigned char ub[] = { 
-  0x05, 0x0, 0x0c, 0x0f, 0x0, 
-  0x10, 0x13, 0x0, 0x28, 0x2a, 0x0, 0x30, 0x32, 
-  0x0, 0x33, 0x36, 0x0, 0x39, 0x3d, 0x5c, 0x0, 
-  0x5d, 0x5f, 0x0, 0x61, 0x66, 0x0, 0x6f, 0x83, 
-  0x85, 0x0, 0x8a, 0x8e, 0x0, 0x90, 0x92, 0x0, 
-  0x95, 0x99, 0x0, 0x9a, 0x9c, 0x9e, 0x0, 0x9f, 
-  0xa3, 0x0, 0xa4, 0xa8, 0x0, 0xaa, 0xae, 0x0, 
-  0xb5, 0xb7, 0x0, 0xb9, 0xe7, 0x0, 0xef };
-static const unsigned char uc[] = { 
-  0x05, 
-  0x0, 0x0c, 0x0e, 0x0, 0x10, 0x12, 0x0, 0x28, 
-  0x2a, 0x0, 0x33, 0x35, 0x0, 0x39, 0x60, 0x0, 
-  0x61, 0x66, 0x0, 0x6f, 0x85, 0x0, 0x8c, 0x8e, 
-  0x0, 0x90, 0x92, 0x0, 0xa8, 0xaa, 0x0, 0xb3, 
-  0xb5, 0x0, 0xb9, 0xde, 0xe0, 0x0, 0xe1, 0xe6, 
-  0x0, 0xef };
-static const unsigned char ud[] = { 
-  0x05, 0x0, 0x0c, 0x0e, 0x0, 0x10, 
-  0x12, 0x0, 0x28, 0x2a, 0x0, 0x39, 0x60, 0x0, 
-  0x61, 0x66, 0x0, 0x6f, 0x85, 0x0, 0x96, 0x9a, 
-  0x0, 0xb1, 0xb3, 0x0, 0xbb, 0xbd, 0xc0, 0x0, 
-  0xc6 };
-static const unsigned char ue[] = { 
-  0x01, 0x0, 0x2e, 0x30, 0x0, 0x3a, 0x40, 
-  0x0, 0x45, 0x47, 0x0, 0x4e, 0x50, 0x0, 0x59, 
-  0x81, 0x0, 0x82, 0x84, 0x87, 0x0, 0x88, 0x8a, 
-  0x8d, 0x94, 0x0, 0x97, 0x99, 0x0, 0x9f, 0xa1, 
-  0x0, 0xa3, 0xa5, 0xa7, 0xaa, 0x0, 0xab, 0xad, 
-  0x0, 0xb0, 0xb2, 0x0, 0xb3, 0xbd, 0xc0, 0x0, 
-  0xc4, 0xc6, 0xd0, 0x0, 0xd9, 0xdc, 0x0, 0xdd }; 
-static const unsigned char uf[] = {
-  0x00, 0x20, 0x0, 0x29, 0x40, 0x0, 0x47, 0x49, 
-  0x0, 0x6a, 0x88, 0x0, 0x8b };
-static const unsigned char u10[] = { 
-  0x00, 0x0, 0x21, 
-  0x23, 0x0, 0x27, 0x29, 0x0, 0x2a, 0x40, 0x0, 
-  0x49, 0x50, 0x0, 0x55, 0xa0, 0x0, 0xc5, 0xd0, 
-  0x0, 0xf8 };
-static const unsigned char u11[] = { 
-  0x00, 0x0, 0x59, 0x5f, 0x0, 0xa2, 
-  0xa8, 0x0, 0xf9 };
-static const unsigned char u12[] = { 
-  0x00, 0x0, 0x06, 0x08, 0x0, 
-  0x46, 0x48, 0x4a, 0x0, 0x4d, 0x50, 0x0, 0x56, 
-  0x58, 0x5a, 0x0, 0x5d, 0x60, 0x0, 0x86, 0x88, 
-  0x8a, 0x0, 0x8d, 0x90, 0x0, 0xae, 0xb0, 0xb2, 
-  0x0, 0xb5, 0xb8, 0x0, 0xbe, 0xc0, 0xc2, 0x0, 
-  0xc5, 0xc8, 0x0, 0xce, 0xd0, 0x0, 0xd6, 0xd8, 
-  0x0, 0xee, 0xf0, 0x0, 0xff };
-static const unsigned char u13[] = { 
-  0x00, 0x0, 0x0e, 0x10, 0x12, 0x0, 
-  0x15, 0x18, 0x0, 0x1e, 0x20, 0x0, 0x46, 0x48, 
-  0x0, 0x5a, 0x69, 0x0, 0x71, 0xa0, 0x0, 0xf4 };
-static const unsigned char u14[] = { 
-  0x01, 0x0, 0xff };
-/* u15 all alphabetic */
-static const unsigned char u16[] = { 
-  0x00, 0x0, 0x6c, 0x6f, 0x0, 0x76, 
-  0x81, 0x0, 0x9a, 0xa0, 0x0, 0xea, 0xee, 0x0, 0xf0 };
-static const unsigned char u17[] = { 
-  0x00, 
-  0x0, 0x0c, 0x0e, 0x0, 0x11, 0x20, 0x0, 0x31, 
-  0x40, 0x0, 0x51, 0x60, 0x0, 0x6c, 0x6e, 0x0, 
-  0x70, 0x80, 0x0, 0xb3, 0xd7, 0xdc, 0xe0, 0x0, 
-  0xe9 };
-static const unsigned char u18[] = { 
-  0x10, 0x0, 0x19, 0x20, 0x0, 0x77, 0x80, 
-  0x0, 0xa8 };
-static const unsigned char u1e[] = { 
-  0x00, 0x0, 0x9b, 0xa0, 0x0, 0xf9 }; 
-static const unsigned char u1f[] = { 
-  0x00, 0x0, 0x15, 0x18, 0x0, 0x1d, 
-  0x20, 0x0, 0x45, 0x48, 0x0, 0x4d, 0x50, 0x0, 0x57, 0x59, 
-  0x5b, 0x5d, 0x5f, 0x0, 0x7d, 0x80, 0x0, 0xb4, 
-  0xb6, 0x0, 0xbc, 0xbe, 0xc2, 0x0, 0xc4, 0xc6, 
-  0x0, 0xcc, 0xd0, 0x0, 0xd3, 0xd6, 0x0, 0xdb, 
-  0xe0, 0x0, 0xec, 0xf2, 0x0, 0xf4, 0xf6, 0x0, 
-  0xfc };
-static const unsigned char u20[] = { 
-  0x71, 0x7f };
-static const unsigned char u21[] = { 
-  0x02, 0x07, 0x0a, 0x0, 0x13, 
-  0x15, 0x19, 0x0, 0x1d, 0x24, 0x26, 0x28, 0x0, 
-  0x2d, 0x2f, 0x0, 0x31, 0x33, 0x0, 0x39, 0x3d, 
-  0x0, 0x3f, 0x45, 0x0, 0x49, 0x60, 0x0, 0x83 }; 
-static const unsigned char u24[] = { 
-  0x9c, 0x0, 0xe9 };
-static const unsigned char u30[] = { 
-  0x05, 0x0, 0x07, 0x21, 0x0, 
-  0x29, 0x31, 0x0, 0x35, 0x38, 0x0, 0x3c, 0x41, 
-  0x0, 0x96, 0x9d, 0x0, 0x9f, 0xa1, 0x0, 0xfa, 
-  0xfc, 0x0, 0xff };
-static const unsigned char u31[] = { 
-  0x05, 0x0, 0x2c, 0x31, 0x0, 
-  0x8e, 0xa0, 0x0, 0xb7, 0xf0, 0x0, 0xff };
-/* u34 to u4c all alphabetic */
-static const unsigned char u4d[] = { 
-  0x00, 0x0, 0xb5 };
-/* u4e to u9e all alphabetic */
-static const unsigned char u9f[] = { 
-  0x00, 0x0, 0xa5 };
-/* ua0 to ua3 all alphabetic */
-static const unsigned char ua4[] = { 
-  0x00, 0x0, 0x8c }; 
-/* uac to ud6 all alphabetic */
-static const unsigned char ud7[] = { 
-  0xa3 };
-/* uf9 all alphabetic */
-static const unsigned char ufa[] = { 
-  0x00, 0x0, 0x2d, 0x30, 0x0, 0x6a };
-static const unsigned char ufb[] = { 
-  0x00, 0x0, 0x06, 0x13, 0x0, 0x17, 0x1d, 
-  0x1f, 0x0, 0x28, 0x2a, 0x0, 0x36, 0x38, 0x0, 
-  0x3c, 0x3e, 0x40, 0x0, 0x41, 0x43, 0x0, 0x44, 
-  0x46, 0x0, 0xb1, 0xd3, 0x0, 0xff };
-/* ufc all alphabetic */
-static const unsigned char ufd[] = { 
-  0x00, 0x0, 0x3d, 0x50, 0x0, 
-  0x8f, 0x92, 0x0, 0xc7, 0xf0, 0x0, 0xfb };
-static const unsigned char ufe[] = { 
-  0x70, 
-  0x0, 0x74, 0x76, 0x0, 0xfc };
-static const unsigned char uff[] = { 
-  0x10, 0x0, 0x19, 
-  0x21, 0x0, 0x3a, 0x41, 0x0, 0x5a, 0x66, 0x0, 
-  0xbe, 0xc2, 0x0, 0xc7, 0xca, 0x0, 0xcf, 0xd2, 
-  0x0, 0xd7, 0xda, 0x0, 0xdc };
-static const unsigned char u103[] = { 
-  0x00, 0x0, 0x1e, 
-  0x30, 0x0, 0x4a };
-static const unsigned char u104[] = { 
-  0x00, 0x0, 0x25, 0x28, 0x0, 
-  0x4d };
-static const unsigned char u1d4[] = { 
-  0x00, 0x0, 0x54, 0x56, 0x0, 0x9c, 0x9e, 
-  0x0, 0x9f, 0xa2, 0xa5, 0x0, 0xa6, 0xa9, 0x0, 
-  0xac, 0xae, 0x0, 0xb9, 0xbb, 0xbd, 0x0, 0xc0, 
-  0xc2, 0x0, 0xc3, 0xc5, 0x0, 0xff };
-static const unsigned char u1d5[] = { 
-  0x00, 0x0, 0x05, 0x07, 0x0, 
-  0x0a, 0x0d, 0x0, 0x14, 0x16, 0x0, 0x1c, 0x1e, 
-  0x0, 0x39, 0x3b, 0x0, 0x3e, 0x40, 0x0, 0x44, 
-  0x46, 0x4a, 0x0, 0x50, 0x52, 0x0, 0xff }; 
-static const unsigned char u1d6[] = { 
-  0x00, 0x0, 0xa3, 0xa8, 
-  0x0, 0xc0, 0xc2, 0x0, 0xda, 0xdc, 0x0, 0xfa, 
-  0xfc, 0x0, 0xff };
-static const unsigned char u1d7[] = { 
-  0x00, 0x0, 0x14, 0x16, 0x0, 
-  0x34, 0x36, 0x0, 0x4e, 0x50, 0x0, 0x6e, 
-  0x70, 0x0, 0x88, 0x8a, 0x0, 0xa8, 0xaa, 0x0, 0xc2, 
-  0xc4, 0x0, 0xc9, 0xce, 0x0, 0xff };
-/* u200 to u2a5 all alphabetic */
-static const unsigned char u2a6[] = { 
-  0x00, 0x0, 0xd6 };
-/* u2f8 to u2f9 all alphabetic */
-static const unsigned char u2fa[] = { 
-  0x00, 0x0, 0x1d };
diff --git a/newlib/libc/ctype/utf8print.h b/newlib/libc/ctype/utf8print.h
deleted file mode 100644
index c895a3cb8..000000000
--- a/newlib/libc/ctype/utf8print.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/* Generated using unicode.txt 3.2 */
-
-static const unsigned char u0[] = {
-  0x20, 0x0, 0x7e, 0xa0, 0x0, 0xff };
-/* u1 is all-print */
-static const unsigned char u2[] = {
-  0x00, 0x0, 0x20, 0x22, 0x0, 
-  0x33, 0x50, 0x0, 0xad, 0xb0, 0x0, 0xee };
-static const unsigned char u3[] = { 
-  0x00, 0x0, 0x4f, 0x60, 0x0, 0x6f, 0x74, 0x0, 0x75, 
-  0x7a, 0x7e, 0x84, 0x0, 0x8a, 0x8c, 0x8e, 0x0, 
-  0xa1, 0xa3, 0x0, 0xce, 0xd0, 0x0, 0xf6 };
-static const unsigned char u4[] = {
-  0x00, 0x0, 0x86, 0x88, 0x0, 0xce, 0xd0, 0x0, 0xf5, 
-  0xf8, 0x0, 0xf9 };
-static const unsigned char u5[] = {
-  0x00, 0x0, 0x0f, 0x31, 0x0, 
-  0x56, 0x59, 0x0, 0x5f, 0x61, 0x0, 0x87, 0x89, 
-  0x0, 0x8a, 0x91, 0x0, 0xa1, 0xa3, 0x0, 0xb9, 
-  0xbb, 0x0, 0xc4, 0xd0, 0x0, 0xea, 0xf0, 0x0, 
-  0xf4 };
-static const unsigned char u6[] = {
-  0x0c, 0x1b, 0x1f, 0x21, 0x0, 0x3a, 0x40, 
-  0x0, 0x55, 0x60, 0x0, 0xed, 0xf0, 0x0, 0xfe };
-static const unsigned char u7[] = { 
-  0x00, 0x0, 0x0d, 0x0f, 0x0, 0x2c, 0x30, 0x0, 
-  0x4a, 0x80, 0x0, 0xb1 };
-static const unsigned char u9[] = {
-  0x01, 0x0, 0x03, 0x05, 
-  0x0, 0x39, 0x3c, 0x0, 0x4d, 0x50, 0x0, 0x54, 
-  0x58, 0x0, 0x70, 0x81, 0x0, 0x83, 0x85, 0x0, 
-  0x8c, 0x8f, 0x0, 0x90, 0x93, 0x0, 0xa8, 0xaa, 
-  0x0, 0xb0, 0xb2, 0xb6, 0x0, 0xb9, 0xbc, 0xbe, 
-  0x0, 0xc4, 0xc7, 0x0, 0xc8, 0xcb, 0x0, 0xcd, 
-  0xd7, 0xdc, 0x0, 0xdd, 0xdf, 0x0, 0xe3, 0xe6, 
-  0x0, 0xfa };
-static const unsigned char ua[] = { 
-  0x02, 0x05, 0x0, 0x0a, 0x0f, 0x0, 
-  0x10, 0x13, 0x0, 0x28, 0x2a, 0x0, 0x30, 0x32, 
-  0x0, 0x33, 0x35, 0x0, 0x36, 0x38, 0x0, 0x39, 
-  0x3c, 0x3e, 0x0, 0x42, 0x47, 0x0, 0x48, 0x4b, 
-  0x0, 0x4d, 0x59, 0x0, 0x5c, 0x5e, 0x66, 0x0, 
-  0x74, 0x81, 0x0, 0x83, 0x85, 0x0, 0x8b, 0x8d, 
-  0x8f, 0x0, 0x91, 0x93, 0x0, 0xa8, 0xaa, 0x0, 
-  0xb0, 0xb2, 0x0, 0xb3, 0xb5, 0x0, 0xb9, 0xbc, 
-  0x0, 0xc5, 0xc7, 0x0, 0xc9, 0xcb, 0x0, 0xcd, 
-  0xd0, 0xe0, 0xe6, 0x0, 0xef };
-static const unsigned char ub[] = {
-  0x01, 0x0, 0x03, 
-  0x05, 0x0, 0x0c, 0x0f, 0x0, 0x10, 0x13, 0x0, 
-  0x28, 0x2a, 0x0, 0x30, 0x32, 0x0, 0x33, 0x36, 
-  0x0, 0x39, 0x3c, 0x0, 0x43, 0x47, 0x0, 0x48, 
-  0x4b, 0x0, 0x4d, 0x56, 0x0, 0x57, 0x5c, 0x0, 
-  0x5d, 0x5f, 0x0, 0x61, 0x66, 0x0, 0x70, 0x82, 
-  0x0, 0x83, 0x85, 0x0, 0x8a, 0x8e, 0x0, 0x90, 
-  0x92, 0x0, 0x95, 0x99, 0x0, 0x9a, 0x9c, 0x9e, 
-  0x0, 0x9f, 0xa3, 0x0, 0xa4, 0xa8, 0x0, 0xaa, 
-  0xae, 0x0, 0xb5, 0xb7, 0x0, 0xb9, 0xbe, 0x0, 
-  0xc2, 0xc6, 0x0, 0xc8, 0xca, 0x0, 0xcd, 0xd7, 
-  0xe7, 0x0, 0xf2 };
-static const unsigned char uc[] = {
-  0x01, 0x0, 0x03, 0x05, 0x0, 
-  0x0c, 0x0e, 0x0, 0x10, 0x12, 0x0, 0x28, 0x2a, 
-  0x0, 0x33, 0x35, 0x0, 0x39, 0x3e, 0x0, 0x44, 
-  0x46, 0x0, 0x48, 0x4a, 0x0, 0x4d, 0x55, 0x0, 
-  0x56, 0x60, 0x0, 0x61, 0x66, 0x0, 0x6f, 0x82, 
-  0x0, 0x83, 0x85, 0x0, 0x8c, 0x8e, 0x0, 0x90, 
-  0x92, 0x0, 0xa8, 0xaa, 0x0, 0xb3, 0xb5, 0x0, 
-  0xb9, 0xbe, 0x0, 0xc4, 0xc6, 0x0, 0xc8, 0xca, 
-  0x0, 0xcd, 0xd5, 0x0, 0xd6, 0xde, 0xe0, 0x0, 
-  0xe1, 0xe6, 0x0, 0xef };
-static const unsigned char ud[] = {
-  0x02, 0x0, 0x03, 0x05, 
-  0x0, 0x0c, 0x0e, 0x0, 0x10, 0x12, 0x0, 0x28, 
-  0x2a, 0x0, 0x39, 0x3e, 0x0, 0x43, 0x46, 0x0, 
-  0x48, 0x4a, 0x0, 0x4d, 0x57, 0x60, 0x0, 0x61, 
-  0x66, 0x0, 0x6f, 0x82, 0x0, 0x83, 0x85, 0x0, 
-  0x96, 0x9a, 0x0, 0xb1, 0xb3, 0x0, 0xbb, 0xbd, 
-  0xc0, 0x0, 0xc6, 0xca, 0xcf, 0x0, 0xd4, 0xd6, 
-  0xd8, 0x0, 0xdf, 0xf2, 0x0, 0xf4 };
-static const unsigned char ue[] = {
-  0x01, 0x0, 
-  0x3a, 0x3f, 0x0, 0x5b, 0x81, 0x0, 0x82, 0x84, 
-  0x87, 0x0, 0x88, 0x8a, 0x8d, 0x94, 0x0, 0x97, 
-  0x99, 0x0, 0x9f, 0xa1, 0x0, 0xa3, 0xa5, 0xa7, 
-  0xaa, 0x0, 0xab, 0xad, 0x0, 0xb9, 0xbb, 0x0, 
-  0xbd, 0xc0, 0x0, 0xc4, 0xc6, 0xc8, 0x0, 0xcd, 
-  0xd0, 0x0, 0xd9, 0xdc, 0x0, 0xdd };
-static const unsigned char uf[] = {
-  0x00, 0x0, 
-  0x47, 0x49, 0x0, 0x6a, 0x71, 0x0, 0x8b, 0x90, 
-  0x0, 0x97, 0x99, 0x0, 0xbc, 0xbe, 0x0, 0xcc, 
-  0xcf };
-static const unsigned char u10[] = {
-  0x00, 0x0, 0x21, 0x23, 0x0, 0x27, 0x29, 
-  0x0, 0x2a, 0x2c, 0x0, 0x32, 0x36, 0x0, 0x39, 
-  0x40, 0x0, 0x59, 0xa0, 0x0, 0xc5, 0xd0, 0x0, 
-  0xf8, 0xfb };
-static const unsigned char u11[] = {
-  0x00, 0x0, 0x59, 0x5f, 0x0, 0xa2, 
-  0xa8, 0x0, 0xf9 };
-static const unsigned char u12[] = {
-  0x00, 0x0, 0x06, 0x08, 0x0, 
-  0x46, 0x48, 0x4a, 0x0, 0x4d, 0x50, 0x0, 0x56, 
-  0x58, 0x5a, 0x0, 0x5d, 0x60, 0x0, 0x86, 0x88, 
-  0x8a, 0x0, 0x8d, 0x90, 0x0, 0xae, 0xb0, 0xb2, 
-  0x0, 0xb5, 0xb8, 0x0, 0xbe, 0xc0, 0xc2, 0x0, 
-  0xc5, 0xc8, 0x0, 0xce, 0xd0, 0x0, 0xd6, 0xd8, 
-  0x0, 0xee, 0xf0, 0x0, 0xff };
-static const unsigned char u13[] = {
-  0x00, 0x0, 0x0e, 0x10, 0x12, 0x0, 
-  0x15, 0x18, 0x0, 0x1e, 0x20, 0x0, 0x46, 0x48, 
-  0x0, 0x5a, 0x61, 0x0, 0x7c, 0xa0, 0x0, 0xf4 };
-static const unsigned char u14[] = { 
-  0x01, 0x0, 0xff };
-/* u15 is all-print */
-static const unsigned char u16[] = {
-  0x00, 0x0, 0x76, 0x80, 0x0, 0x9c, 0xa0, 0x0, 
-  0xf0 };
-static const unsigned char u17[] = {
-  0x00, 0x0, 0x0c, 0x0e, 0x0, 0x14, 0x20, 
-  0x0, 0x36, 0x40, 0x0, 0x53, 0x60, 0x0, 0x6c, 
-  0x6e, 0x0, 0x70, 0x72, 0x0, 0x73, 0x80, 0x0, 
-  0xdc, 0xe0, 0x0, 0xe9 };
-static const unsigned char u18[] = {
-  0x00, 0x0, 0x0e, 0x10, 
-  0x0, 0x19, 0x20, 0x0, 0x77, 0x80, 0x0, 0xa9 };
-static const unsigned char u1e[] = { 
-  0x00, 0x0, 0x9b, 0xa0, 0x0, 0xf9 };
-static const unsigned char u1f[] = {
-  0x00, 0x0, 
-  0x15, 0x18, 0x0, 0x1d, 0x20, 0x0, 0x45, 0x48, 
-  0x0, 0x4d, 0x50, 0x0, 0x57, 0x59, 0x5b, 0x5d, 
-  0x5f, 0x0, 0x7d, 0x80, 0x0, 0xb4, 0xb6, 0x0, 
-  0xc4, 0xc6, 0x0, 0xd3, 0xd6, 0x0, 0xdb, 0xdd, 
-  0x0, 0xef, 0xf2, 0x0, 0xf4, 0xf6, 0x0, 0xfe };
-static const unsigned char u20[] = { 
-  0x00, 0x0, 0x27, 0x2a, 0x0, 0x52, 0x57, 0x5f, 
-  0x0, 0x63, 0x6a, 0x0, 0x71, 0x74, 0x0, 0x8e, 
-  0xa0, 0x0, 0xb1, 0xd0, 0x0, 0xea };
-static const unsigned char u21[] = {
-  0x00, 0x0, 
-  0x3a, 0x3d, 0x0, 0x4b, 0x53, 0x0, 0x83, 0x90, 
-  0x0, 0xff };
-/* u22 is all-print */
-static const unsigned char u23[] = {
-  0x00, 0x0, 0xce };
-static const unsigned char u24[] = {
-  0x00, 0x0, 0x26, 0x40, 0x0, 0x4a, 
-  0x60, 0x0, 0xfe };
-/* u25 is all-print */
-static const unsigned char u26[] = {
-  0x00, 0x0, 0x13, 0x16, 0x0, 
-  0x17, 0x19, 0x0, 0x7d, 0x80, 0x0, 0x89 };
-static const unsigned char u27[] = {
-  0x01, 
-  0x0, 0x04, 0x06, 0x0, 0x09, 0x0c, 0x0, 0x27, 
-  0x29, 0x0, 0x4b, 0x4d, 0x4f, 0x0, 0x52, 0x56, 
-  0x58, 0x0, 0x5e, 0x61, 0x0, 0x94, 0x98, 0x0, 
-  0xaf, 0xb1, 0x0, 0xbe, 0xd0, 0x0, 0xeb, 0xf0, 
-  0x0, 0xff };
-/* u28 to u2a are all-print */
-static const unsigned char u2e[] = {
-  0x80, 0x0, 0x99, 0x9b, 0x0, 0xf3 };
-static const unsigned char u2f[] = { 
-  0x00, 0x0, 0xd5, 0xf0, 0x0, 0xfb };
-static const unsigned char u30[] = {
-  0x00, 0x0, 
-  0x3f, 0x41, 0x0, 0x96, 0x99, 0x0, 0xff };
-static const unsigned char u31[] = {
-  0x05, 
-  0x0, 0x2c, 0x31, 0x0, 0x8e, 0x90, 0x0, 0xb7, 
-  0xf0, 0x0, 0xff };
-static const unsigned char u32[] = {
-  0x00, 0x0, 0x1c, 0x20, 0x0, 0x43, 0x51, 0x0, 
-  0x7b, 0x7f, 0x0, 0xcb, 0xd0, 0x0, 0xfe };
-static const unsigned char u33[] = {
-  0x00, 
-  0x0, 0x76, 0x7b, 0x0, 0xdd, 0xe0, 0x0, 0xfe };
-/* u34 to u4c is all-print */
-static const unsigned char u4d[] = { 
-  0x00, 0x0, 0xb5 };
-/* u4e to u9e is all-print */
-static const unsigned char u9f[] = {
-  0x00, 0x0, 0xa5 };
-/* ua0 to ua3 is all-print */
-static const unsigned char ua4[] = {
-  0x00, 0x0, 
-  0x8c, 0x90, 0x0, 0xc6 };
-/* uac to ud6 is all-print */
-static const unsigned char ud7[] = {
-  0x00, 0x0, 0xa3 };
-/* ue0 to uf9 is all-print */
-static const unsigned char ufa[] = {
-  0x00, 0x0, 0x2d, 0x30, 0x0, 0x6a };
-static const unsigned char ufb[] = {
-  0x00, 0x0, 0x06, 
-  0x13, 0x0, 0x17, 0x1d, 0x0, 0x36, 0x38, 0x0, 
-  0x3c, 0x3e, 0x40, 0x0, 0x41, 0x43, 0x0, 0x44, 
-  0x46, 0x0, 0xb1, 0xd3, 0x0, 0xff };
-/* ufc is all-print */
-static const unsigned char ufd[] = {
-  0x00, 0x0, 0x3f, 0x50, 0x0, 
-  0x8f, 0x92, 0x0, 0xc7, 0xf0, 0x0, 0xfc };
-static const unsigned char ufe[] = {
-  0x00, 
-  0x0, 0x0f, 0x20, 0x0, 0x23, 0x30, 0x0, 0x46, 
-  0x49, 0x0, 0x52, 0x54, 0x0, 0x66, 0x68, 0x0, 
-  0x6b, 0x70, 0x0, 0x74, 0x76, 0x0, 0xfc, 0xff };
-static const unsigned char uff[] = {
-  0x01, 0x0, 0xbe, 0xc2, 0x0, 0xc7, 0xca, 0x0, 
-  0xcf, 0xd2, 0x0, 0xd7, 0xda, 0x0, 0xdc, 0xe0, 
-  0x0, 0xe6, 0xe8, 0x0, 0xee, 0xf9, 0x0, 0xfd }; 
-static const unsigned char u103[] = {
-  0x00, 0x0, 0x1e, 0x20, 0x0, 0x23, 0x30, 0x0, 
-  0x4a };
-static const unsigned char u104[] = {
-  0x00, 0x0, 0x25, 0x28, 0x0, 0x4d };
-static const unsigned char u1d0[] = {
-  0x00, 
-  0x0, 0xf5 };
-static const unsigned char u1d1[] = {
-  0x00, 0x0, 0x26, 0x2a, 0x0, 0xdd };
-static const unsigned char u1d4[] = { 
-  0x00, 0x0, 0x54, 0x56, 0x0, 0x9c, 0x9e, 0x0, 
-  0x9f, 0xa2, 0xa5, 0x0, 0xa6, 0xa9, 0x0, 0xac, 
-  0xae, 0x0, 0xb9, 0xbb, 0xbd, 0x0, 0xc0, 0xc2, 
-  0x0, 0xc3, 0xc5, 0x0, 0xff };
-static const unsigned char u1d5[] = {
-  0x00, 0x0, 0x05, 0x07, 0x0, 0x0a, 
-  0x0d, 0x0, 0x14, 0x16, 0x0, 0x1c, 0x1e, 0x0, 
-  0x39, 0x3b, 0x0, 0x3e, 0x40, 0x0, 0x44, 0x46, 
-  0x4a, 0x0, 0x50, 0x52, 0x0, 0xff };
-static const unsigned char u1d6[] = {
-  0x00, 0x0, 0xa3, 0xa8, 0x0, 0xff };
-static const unsigned char u1d7[] = {
-  0x00, 0x0, 0xc9, 0xce, 0x0, 0xff };
-/* u200 to u2a5 is all-print */
-static const unsigned char u2a6[] = {
-  0x00, 0x0, 0xd6 };
-/* u2f8 to u2f9 is all-print */
-static const unsigned char u2fa[] = {
-  0x00, 
-  0x0, 0x1d };
-static const unsigned char ue00[] = {
-  0x01, 0x20, 0x0, 0x7f };
-/* uf00 to uffe is all-print */
-static const unsigned char ufff[] = {
-  0x00, 0x0, 
-  0xfd };
-/* u1000 to u10fe is all-print */
-static const unsigned char u10ff[] = {
-  0x00, 0x0, 0xfd };
diff --git a/newlib/libc/ctype/utf8punct.h b/newlib/libc/ctype/utf8punct.h
deleted file mode 100644
index 55c31f9fe..000000000
--- a/newlib/libc/ctype/utf8punct.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/* Generated using unicode.txt 3.2 */
-
-static const unsigned char u0[] = {
-  0x21, 0x0, 0x2f, 0x3a, 0x0, 0x40, 0x5b, 0x0, 
-  0x60, 0x7b, 0x0, 0x7e, 0xa0, 0x0, 0xa9, 0xab, 
-  0x0, 0xb4, 0xb6, 0x0, 0xb9, 0xbb, 0x0, 0xbf, 
-  0xd7, 0xf7 };
-static const unsigned char u2[] = {
-  0xb9, 0x0, 0xba, 0xc2, 0x0, 0xcf, 
-  0xd2, 0x0, 0xdf, 0xe5, 0x0, 0xed };
-static const unsigned char u3[] = { 
-  0x00, 0x0, 
-  0x44, 0x46, 0x0, 0x4f, 0x60, 0x0, 0x6f, 0x74, 
-  0x0, 0x75, 0x7e, 0x84, 0x0, 0x85, 0x87, 0xf6 };
-static const unsigned char u4[] = {
-  0x82, 0x0, 0x86, 0x88, 0x0, 0x89 };
-static const unsigned char u5[] = { 
-  0x5a, 0x0, 
-  0x5f, 0x89, 0x0, 0x8a, 0x91, 0x0, 0xa1, 0xa3, 
-  0x0, 0xb9, 0xbb, 0x0, 0xc4, 0xf3, 0x0, 0xf4 };
-static const unsigned char u6[] = { 
-  0x0c, 0x1b, 0x1f, 0x4b, 0x0, 0x55, 0x6a, 0x0, 
-  0x6d, 0x70, 0xd4, 0xd6, 0x0, 0xe4, 0xe7, 0x0, 
-  0xed, 0xfd, 0x0, 0xfe };
-static const unsigned char u7[] =  { 
-  0x00, 0x0, 0x0d, 0x0f, 
-  0x11, 0x30, 0x0, 0x4a, 0xa6, 0x0, 0xb0 };
-static const unsigned char u9[] = { 
-  0x01, 
-  0x0, 0x03, 0x3c, 0x3e, 0x0, 0x4d, 0x51, 0x0, 
-  0x54, 0x62, 0x0, 0x65, 0x70, 0x81, 0x0, 0x83, 
-  0xbc, 0xbe, 0x0, 0xc4, 0xc7, 0x0, 0xc8, 0xcb, 
-  0x0, 0xcd, 0xd7, 0xe2, 0x0, 0xe3, 0xf2, 0x0, 
-  0xfa };
-static const unsigned char ua[] = {
-  0x02, 0x3c, 0x3e, 0x0, 0x42, 0x47, 0x0, 
-  0x48, 0x4b, 0x0, 0x4d, 0x70, 0x0, 0x71, 0x81, 
-  0x0, 0x83, 0xbc, 0xbe, 0x0, 0xc5, 0xc7, 0x0, 
-  0xc9, 0xcb, 0x0, 0xcd };
-static const unsigned char ub[] = { 
-  0x01, 0x0, 0x03, 0x3c, 
-  0x3e, 0x0, 0x43, 0x47, 0x0, 0x48, 0x4b, 0x0, 
-  0x4d, 0x56, 0x0, 0x57, 0x70, 0x82, 0xbe, 0x0, 
-  0xc2, 0xc6, 0x0, 0xc8, 0xca, 0x0, 0xcd, 0xd7, 
-  0xf0, 0x0, 0xf2 };
-static const unsigned char uc[] = { 
-  0x01, 0x0, 0x03, 0x3e, 0x0, 
-  0x44, 0x46, 0x0, 0x48, 0x4a, 0x0, 0x4d, 0x55, 
-  0x0, 0x56, 0x82, 0x0, 0x83, 0xbe, 0x0, 0xc4, 
-  0xc6, 0x0, 0xc8, 0xca, 0x0, 0xcd, 0xd5, 0x0, 
-  0xd6 };
-static const unsigned char ud[] = { 
-  0x02, 0x0, 0x03, 
-  0x3e, 0x0, 0x43, 0x46, 
-  0x0, 0x48, 0x4a, 0x0, 0x4d, 0x57, 0x82, 0x0, 
-  0x83, 0xca, 0xcf, 0x0, 0xd4, 0xd6, 0xd8, 0x0, 
-  0xdf, 0xf2, 0x0, 0xf4 };
-static const unsigned char ue[] = { 
-  0x2f, 0x3f, 0x46, 0x4f, 
-  0x5a, 0x0, 0x5b, 0xb1, 0xb4, 0x0, 0xb9, 0xbb, 
-  0x0, 0xbc, 0xc8, 0x0, 0xcd };
-static const unsigned char uf[] = { 
-  0x01, 0x0, 0x1f, 
-  0x2a, 0x0, 0x3f, 0x71, 0x0, 0x87, 0x90, 0x0, 
-  0x97, 0x99, 0x0, 0xbc, 0xbe, 0x0, 0xcc, 0xcf };
-static const unsigned char u10[] = { 
-  0x2c, 0x0, 0x32, 0x36, 0x0, 0x39, 0x4a, 0x0, 
-  0x4f, 0x56, 0x0, 0x59, 0xfb };
-static const unsigned char u13[] = { 
-  0x61, 0x0, 0x68, 
-  0x72, 0x0, 0x7c };
-static const unsigned char u16[] = { 
-  0x6d, 0x0, 0x6e, 0x9b, 0x0, 
-  0x9c, 0xeb, 0x0, 0xed };
-static const unsigned char u17[] = { 
-  0x12, 0x0, 0x14, 0x32, 
-  0x0, 0x36, 0x52, 0x0, 0x53, 0x72, 0x0, 0x73, 
-  0xb4, 0x0, 0xd6, 0xd8, 0x0, 0xdb };
-static const unsigned char u18[] = { 
-  0x00, 0x0, 
-  0x0e, 0xa9 };
-static const unsigned char u1f[] = { 
-  0xbd, 0xbf, 0x0, 0xc1, 
-  0xcd, 0x0, 0xcf, 0xdd, 0x0, 0xdf, 0xed, 0x0, 0xef, 0xfd, 
-  0x0, 0xfe };
-static const unsigned char u20[] = { 
-  0x07, 0x0c, 0x0, 0x27, 0x2a, 0x0, 
-  0x52, 0x57, 0x60, 0x0, 0x63, 0x6a, 0x0, 0x70, 
-  0x74, 0x0, 0x7e, 0x80, 0x0, 0x8e, 0xa0, 0x0, 
-  0xb1, 0xd0, 0x0, 0xea };
-static const unsigned char u21[] = { 
-  0x00, 0x0, 0x01, 0x03, 
-  0x0, 0x06, 0x08, 0x0, 0x09, 0x14, 0x16, 0x0, 
-  0x18, 0x1e, 0x0, 0x23, 0x25, 0x27, 0x2e, 0x32, 
-  0x3a, 0x40, 0x0, 0x44, 0x4a, 0x0, 0x4b, 0x53, 
-  0x0, 0x5f, 0x90, 0x0, 0xff };
-/* u22 is all-punctuation */
-static const unsigned char u23[] = { 
-  0x00, 0x0, 0xce };
-static const unsigned char u24[] = { 
-  0x00, 0x0, 0x26, 
-  0x40, 0x0, 0x4a, 0x60, 0x0, 0x9b, 0xea, 0x0, 
-  0xfe };
-/* u25 is all-punctuation */
-static const unsigned char u26[] = { 
-  0x00, 0x0, 0x13, 
-  0x16, 0x0, 0x17, 0x19, 
-  0x0, 0x7d, 0x80, 0x0, 0x89 };
-static const unsigned char u27[] = { 
-  0x01, 0x0, 0x04, 
-  0x06, 0x0, 0x09, 0x0c, 0x0, 0x27, 0x29, 0x0, 
-  0x4b, 0x4d, 0x4f, 0x0, 0x52, 0x56, 0x58, 0x0, 
-  0x5e, 0x61, 0x0, 0x94, 0x98, 0x0, 0xaf, 0xb1, 
-  0x0, 0xbe, 0xd0, 0x0, 0xeb, 0xf0, 0x0, 0xff };
-/* u28 to u2a is all-punctuation */ 
-static const unsigned char u2e[] = { 
-  0x80, 0x0, 0x99, 
-  0x9b, 0x0, 0xf3 };
-static const unsigned char u2f[] = { 
-  0x00, 0x0, 
-  0xd5, 0xf0, 0x0, 0xfb };
-static const unsigned char u30[] = { 
-  0x01, 0x0, 0x04, 0x08, 
-  0x0, 0x20, 0x2a, 0x0, 0x30, 0x36, 0x0, 0x37, 
-  0x3d, 0x0, 0x3f, 0x99, 0x0, 0x9c, 0xa0, 0xfb };
-static const unsigned char u31[] = { 
-  0x90, 0x0, 0x9f };
-static const unsigned char u32[] = { 
-  0x00, 0x0, 0x1c, 0x20, 0x0, 
-  0x43, 0x51, 0x0, 0x7b, 0x7f, 0x0, 0xcb, 0xd0, 
-  0x0, 0xfe };
-static const unsigned char u33[] = { 
-  0x00, 0x0, 0x76, 0x7b, 0x0, 0xdd, 
-  0xe0, 0x0, 0xfe };
-static const unsigned char ua4[] = { 
-  0x90, 0x0, 0xc6 };
-/* ue0 to uf8 are all-punctuation */
-static const unsigned char ufb[] = { 
-  0x1e, 0x29 };
-static const unsigned char ufd[] = { 
-  0x3e, 0x0, 0x3f, 0xfc };
-static const unsigned char ufe[] = { 
-  0x00, 
-  0x0, 0x0f, 0x20, 0x0, 0x23, 0x30, 0x0, 0x46, 
-  0x49, 0x0, 0x52, 0x54, 0x0, 0x66, 0x68, 0x0, 
-  0x6b, 0xff };
-static const unsigned char uff[] = { 
-  0x01, 0x0, 0x0f, 0x1a, 0x0, 0x20, 
-  0x3b, 0x0, 0x40, 0x5b, 0x0, 0x65, 0xe0, 0x0, 
-  0xe6, 0xe8, 0x0, 0xee, 0xf9, 0x0, 0xfd };
-static const unsigned char u103[] = { 
-  0x20, 
-  0x0, 0x23 };
-static const unsigned char u1d0[] = { 
-  0x00, 0x0, 0xf5 }; 
-static const unsigned char u1d1[] = { 
-  0x00, 0x0, 0x26, 
-  0x2a, 0x0, 0xdd };
-static const unsigned char u1d6[] = { 
-  0xc1, 0xdb, 0xfb };
-static const unsigned char u1d7[] = { 
-  0x15, 0x35, 
-  0x4f, 0x6f, 0x89, 0xa9, 0xc3 };
-static const unsigned char ue00[] = { 
-  0x01, 0x20, 0x0, 
-  0x7f };
-/* uf00 to uffe are all punctuation */
-static const unsigned char ufff[] = { 
-  0x00, 0x0, 0xfd };
-/* u1000 to u10fe are all punctuation */
-static const unsigned char u10ff[] = { 
-  0x00, 0x0, 0xfd };
diff --git a/newlib/libc/ctype/wctrans.c b/newlib/libc/ctype/wctrans.c
deleted file mode 100644
index 75069831e..000000000
--- a/newlib/libc/ctype/wctrans.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<wctrans>>---get wide-character translation type
-
-INDEX
-	wctrans
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	wctrans_t wctrans(const char *<[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	wctrans_t wctrans(<[c]>)
-	const char * <[c]>;
-
-
-DESCRIPTION
-<<wctrans>> is a function which takes a string <[c]> and gives back
-the appropriate wctrans_t type value associated with the string,
-if one exists.  The following values are guaranteed to be recognized:
-"tolower" and "toupper".
-
-RETURNS
-<<wctrans>> returns 0 and sets <<errno>> to <<EINVAL>> if the
-given name is invalid.  Otherwise, it returns a valid non-zero wctrans_t
-value.
-
-PORTABILITY
-<<wctrans>> is C99.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <reent.h>
-#include <wctype.h>
-#include <errno.h>
-#include "local.h"
-
-wctrans_t
-_DEFUN (_wctrans_r, (r, c), 
-	struct _reent *r _AND
-	const char *c)
-{
-  if (!strcmp (c, "tolower"))
-    return WCT_TOLOWER;
-  else if (!strcmp (c, "toupper"))
-    return WCT_TOUPPER;
-  else
-    {
-      r->_errno = EINVAL;
-      return 0;
-    }
-}
-
-#ifndef _REENT_ONLY
-wctrans_t
-_DEFUN (wctrans, (c),
-	const char *c)
-{
-  return _wctrans_r (_REENT, c);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/ctype/wctype.c b/newlib/libc/ctype/wctype.c
deleted file mode 100644
index dc400c422..000000000
--- a/newlib/libc/ctype/wctype.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-     Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-     Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-
-     The name of Red Hat Incorporated may not be used to endorse
-     or promote products derived from this software without specific
-     prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS   
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-FUNCTION
-	<<wctype>>---get wide-character classification type
-
-INDEX
-	wctype
-
-ANSI_SYNOPSIS
-	#include <wctype.h>
-	wctype_t wctype(const char *<[c]>);
-
-TRAD_SYNOPSIS
-	#include <wctype.h>
-	wctype_t wctype(<[c]>)
-	const char * <[c]>;
-
-
-DESCRIPTION
-<<wctype>> is a function which takes a string <[c]> and gives back
-the appropriate wctype_t type value associated with the string,
-if one exists.  The following values are guaranteed to be recognized:
-"alnum", "alpha", "blank", "cntrl", "digit", "graph", "lower", "print",
-"punct", "space", "upper", and "xdigit".
-
-RETURNS
-<<wctype>> returns 0 and sets <<errno>> to <<EINVAL>> if the
-given name is invalid.  Otherwise, it returns a valid non-zero wctype_t
-value.
-
-PORTABILITY
-<<wctype>> is C99.
-
-No supporting OS subroutines are required.
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <reent.h>
-#include <wctype.h>
-#include <errno.h>
-#include "local.h"
-
-wctype_t
-_DEFUN (_wctype_r, (r, c), 
-	struct _reent *r _AND
-	const char *c)
-{
-  switch (*c)
-    {
-    case 'a':
-      if (!strcmp (c, "alnum"))
-        return WC_ALNUM; 
-      else if (!strcmp (c, "alpha"))
-        return WC_ALPHA;
-      break;
-    case 'b':
-      if (!strcmp (c, "blank"))
-        return WC_BLANK;
-      break;
-    case 'c':
-      if (!strcmp (c, "cntrl"))
-        return WC_CNTRL;
-      break;
-    case 'd':
-      if (!strcmp (c, "digit"))
-        return WC_DIGIT;
-      break;
-    case 'g':
-      if (!strcmp (c, "graph"))
-        return WC_GRAPH;
-      break;
-    case 'l':
-      if (!strcmp (c, "lower"))
-        return WC_LOWER;
-      break;
-    case 'p':
-      if (!strcmp (c, "print"))
-        return WC_PRINT;
-      else if (!strcmp (c, "punct"))
-        return WC_PUNCT;
-      break;
-    case 's':
-      if (!strcmp (c, "space"))
-        return WC_SPACE;
-      break;
-    case 'u':
-      if (!strcmp (c, "upper"))
-        return WC_UPPER;
-      break;
-    case 'x':
-      if (!strcmp (c, "xdigit"))
-        return WC_XDIGIT;
-      break;
-    }
-
-  /* otherwise invalid */
-  r->_errno = EINVAL;
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-wctype_t
-_DEFUN (wctype, (c),
-	const char *c)
-{
-  return _wctype_r (_REENT, c);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/errno/Makefile.am b/newlib/libc/errno/Makefile.am
deleted file mode 100644
index 680aecada..000000000
--- a/newlib/libc/errno/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = errno.c
-
-liberrno_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = liberrno.la
-liberrno_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES =
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-# No doc for errno.
-doc:
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/errno/Makefile.in b/newlib/libc/errno/Makefile.in
deleted file mode 100644
index 6cb5349e2..000000000
--- a/newlib/libc/errno/Makefile.in
+++ /dev/null
@@ -1,387 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = errno.c
-
-liberrno_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@liberrno.la
-@USE_LIBTOOL_TRUE@liberrno_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-CHEWOUT_FILES = 
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  errno.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-liberrno_la_LIBADD = 
-@USE_LIBTOOL_TRUE@liberrno_la_OBJECTS =  errno.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(liberrno_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(liberrno_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus errno/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-liberrno.la: $(liberrno_la_OBJECTS) $(liberrno_la_DEPENDENCIES)
-	$(LINK)  $(liberrno_la_LDFLAGS) $(liberrno_la_OBJECTS) $(liberrno_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = errno
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-# No doc for errno.
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/errno/errno.c b/newlib/libc/errno/errno.c
deleted file mode 100644
index fd1743d73..000000000
--- a/newlib/libc/errno/errno.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* The errno variable is stored in the reentrancy structure.  This
-   function returns its address for use by the macro errno defined in
-   errno.h.  */
-
-#include <errno.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-int *
-__errno ()
-{
-  return &_REENT->_errno;
-}
-
-#endif
diff --git a/newlib/libc/include/_ansi.h b/newlib/libc/include/_ansi.h
deleted file mode 100644
index 07bfd88eb..000000000
--- a/newlib/libc/include/_ansi.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Provide support for both ANSI and non-ANSI environments.  */
-
-/* Some ANSI environments are "broken" in the sense that __STDC__ cannot be
-   relied upon to have it's intended meaning.  Therefore we must use our own
-   concoction: _HAVE_STDC.  Always use _HAVE_STDC instead of __STDC__ in newlib
-   sources!
-
-   To get a strict ANSI C environment, define macro __STRICT_ANSI__.  This will
-   "comment out" the non-ANSI parts of the ANSI header files (non-ANSI header
-   files aren't affected).  */
-
-#ifndef	_ANSIDECL_H_
-#define	_ANSIDECL_H_
-
-#include <newlib.h>
-#include <sys/config.h>
-
-/* First try to figure out whether we really are in an ANSI C environment.  */
-/* FIXME: This probably needs some work.  Perhaps sys/config.h can be
-   prevailed upon to give us a clue.  */
-
-#ifdef __STDC__
-#define _HAVE_STDC
-#endif
-
-#ifdef _HAVE_STDC
-#define	_PTR		void *
-#define	_AND		,
-#define	_NOARGS		void
-#define	_CONST		const
-#define	_VOLATILE	volatile
-#define	_SIGNED		signed
-#define	_DOTS		, ...
-#define _VOID void
-#ifdef __CYGWIN__
-#define	_EXFUN(name, proto)		__cdecl name proto
-#define	_EXPARM(name, proto)		(* __cdecl name) proto
-#else
-#define	_EXFUN(name, proto)		name proto
-#define _EXPARM(name, proto)		(* name) proto
-#endif
-#define	_DEFUN(name, arglist, args)	name(args)
-#define	_DEFUN_VOID(name)		name(_NOARGS)
-#define _CAST_VOID (void)
-#ifndef _LONG_DOUBLE
-#define _LONG_DOUBLE long double
-#endif
-#ifndef _PARAMS
-#define _PARAMS(paramlist)		paramlist
-#endif
-#else	
-#define	_PTR		char *
-#define	_AND		;
-#define	_NOARGS
-#define	_CONST
-#define	_VOLATILE
-#define	_SIGNED
-#define	_DOTS
-#define _VOID void
-#define	_EXFUN(name, proto)		name()
-#define	_DEFUN(name, arglist, args)	name arglist args;
-#define	_DEFUN_VOID(name)		name()
-#define _CAST_VOID
-#define _LONG_DOUBLE double
-#ifndef _PARAMS
-#define _PARAMS(paramlist)		()
-#endif
-#endif
-
-/* Support gcc's __attribute__ facility.  */
-
-#ifdef __GNUC__
-#define _ATTRIBUTE(attrs) __attribute__ (attrs)
-#else
-#define _ATTRIBUTE(attrs)
-#endif
-
-/*  ISO C++.  */
-
-#ifdef __cplusplus
-#if !(defined(_BEGIN_STD_C) && defined(_END_STD_C))
-#ifdef _HAVE_STD_CXX
-#define _BEGIN_STD_C namespace std { extern "C" {
-#define _END_STD_C  } }
-#else
-#define _BEGIN_STD_C extern "C" {
-#define _END_STD_C  }
-#endif
-#endif
-#else
-#define _BEGIN_STD_C
-#define _END_STD_C
-#endif
-
-#endif /* _ANSIDECL_H_ */
diff --git a/newlib/libc/include/_syslist.h b/newlib/libc/include/_syslist.h
deleted file mode 100644
index fa552fb60..000000000
--- a/newlib/libc/include/_syslist.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* internal use only -- mapping of "system calls" for libraries that lose
-   and only provide C names, so that we end up in violation of ANSI */
-#ifndef __SYSLIST_H
-#define __SYSLIST_H
-#ifdef MISSING_SYSCALL_NAMES
-#define _close close
-#define _execve execve
-#define _fcntl fcntl
-#define _fork fork
-#define _fstat fstat
-#define _getpid getpid
-#define _gettimeofday gettimeofday
-#define _kill kill
-#define _link link
-#define _lseek lseek
-#define _open open
-#define _read read
-#define _sbrk sbrk
-#define _stat stat
-#define _times times
-#define _unlink unlink
-#define _wait wait
-#define _write write
-/* functions not yet sysfaked */
-#define _opendir opendir
-#define _readdir readdir
-#define _closedir closedir
-#endif
-#endif
diff --git a/newlib/libc/include/alloca.h b/newlib/libc/include/alloca.h
deleted file mode 100644
index 42439e370..000000000
--- a/newlib/libc/include/alloca.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* libc/include/alloca.h - Allocate memory on stack */
-
-/* Written 2000 by Werner Almesberger */
-/* Rearranged for general inclusion by stdlib.h.
-   2001, Corinna Vinschen <vinschen@redhat.com> */
-
-#ifndef _NEWLIB_ALLOCA_H
-#define _NEWLIB_ALLOCA_H
-
-#include "_ansi.h"
-#include <sys/reent.h>
-
-#ifdef __GNUC__
-#define alloca(size) __builtin_alloca(size)
-#else
-void * _EXFUN(alloca,(size_t));
-#endif
-
-#endif
diff --git a/newlib/libc/include/ar.h b/newlib/libc/include/ar.h
deleted file mode 100644
index ac2e4ca92..000000000
--- a/newlib/libc/include/ar.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*	$NetBSD: ar.h,v 1.4 1994/10/26 00:55:43 cgd Exp $	*/
-
-/*-
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- * (c) UNIX System Laboratories, Inc.
- * All or some portions of this file are derived from material licensed
- * to the University of California by American Telephone and Telegraph
- * Co. or Unix System Laboratories, Inc. and are reproduced herein with
- * the permission of UNIX System Laboratories, Inc.
- *
- * This code is derived from software contributed to Berkeley by
- * Hugh Smith at The University of Guelph.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ar.h	8.2 (Berkeley) 1/21/94
- */
-
-#ifndef _AR_H_
-#define	_AR_H_
-
-/* Pre-4BSD archives had these magic numbers in them. */
-#define	OARMAG1	0177555
-#define	OARMAG2	0177545
-
-#define	ARMAG		"!<arch>\n"	/* ar "magic number" */
-#define	SARMAG		8		/* strlen(ARMAG); */
-
-#define	AR_EFMT1	"#1/"		/* extended format #1 */
-
-struct ar_hdr {
-	char ar_name[16];		/* name */
-	char ar_date[12];		/* modification time */
-	char ar_uid[6];			/* user id */
-	char ar_gid[6];			/* group id */
-	char ar_mode[8];		/* octal file permissions */
-	char ar_size[10];		/* size in bytes */
-#define	ARFMAG	"`\n"
-	char ar_fmag[2];		/* consistency check */
-};
-
-#endif /* !_AR_H_ */
diff --git a/newlib/libc/include/argz.h b/newlib/libc/include/argz.h
deleted file mode 100644
index 76afc062d..000000000
--- a/newlib/libc/include/argz.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-
-/* The newlib implementation of these functions assumes that sizeof(char) == 1. */
-error_t argz_create (char *const argv[], char **argz, size_t *argz_len);
-error_t argz_create_sep (const char *string, int sep, char **argz, size_t *argz_len);
-size_t argz_count (const char *argz, size_t argz_len);
-void argz_extract (char *argz, size_t argz_len, char **argv);
-void argz_stringify (char *argz, size_t argz_len, int sep);
-error_t argz_add (char **argz, size_t *argz_len, const char *str);
-error_t argz_add_sep (char **argz, size_t *argz_len, const char *str, int sep);
-error_t argz_append (char **argz, size_t *argz_len, const char *buf, size_t buf_len);
-error_t argz_delete (char **argz, size_t *argz_len, char *entry);
-error_t argz_insert (char **argz, size_t *argz_len, char *before, const char *entry);
-char * argz_next (char *argz, size_t argz_len, const char *entry);
-error_t argz_replace (char **argz, size_t *argz_len, const char *str, const char *with, unsigned *replace_count);
diff --git a/newlib/libc/include/assert.h b/newlib/libc/include/assert.h
deleted file mode 100644
index b681a8518..000000000
--- a/newlib/libc/include/assert.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-	assert.h
-*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "_ansi.h"
-
-#undef assert
-
-#ifdef NDEBUG           /* required by ANSI standard */
-#define assert(p)  	((void)0)
-#else
-
-#ifdef __STDC__
-#define assert(e)       ((e) ? (void)0 : __assert(__FILE__, __LINE__, #e))
-#else   /* PCC */
-#define assert(e)       ((e) ? (void)0 : __assert(__FILE__, __LINE__, "e"))
-#endif
-
-#endif /* NDEBUG */
-
-void _EXFUN(__assert,(const char *, int, const char *));
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/newlib/libc/include/ctype.h b/newlib/libc/include/ctype.h
deleted file mode 100644
index a3581df1b..000000000
--- a/newlib/libc/include/ctype.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _CTYPE_H_
-#define _CTYPE_H_
-
-#include "_ansi.h"
-
-_BEGIN_STD_C
-
-int _EXFUN(isalnum, (int __c));
-int _EXFUN(isalpha, (int __c));
-int _EXFUN(iscntrl, (int __c));
-int _EXFUN(isdigit, (int __c));
-int _EXFUN(isgraph, (int __c));
-int _EXFUN(islower, (int __c));
-int _EXFUN(isprint, (int __c));
-int _EXFUN(ispunct, (int __c));
-int _EXFUN(isspace, (int __c));
-int _EXFUN(isupper, (int __c));
-int _EXFUN(isxdigit,(int __c));
-int _EXFUN(tolower, (int __c));
-int _EXFUN(toupper, (int __c));
-
-#ifndef __STRICT_ANSI__
-int _EXFUN(isblank, (int __c));
-int _EXFUN(isascii, (int __c));
-int _EXFUN(toascii, (int __c));
-int _EXFUN(_tolower, (int __c));
-int _EXFUN(_toupper, (int __c));
-#endif
-
-#define	_U	01
-#define	_L	02
-#define	_N	04
-#define	_S	010
-#define _P	020
-#define _C	040
-#define _X	0100
-#define	_B	0200
-
-extern	__IMPORT _CONST char	_ctype_[];
-
-#ifndef __cplusplus
-#define	isalpha(c)	((_ctype_+1)[(unsigned)(c)]&(_U|_L))
-#define	isupper(c)	((_ctype_+1)[(unsigned)(c)]&_U)
-#define	islower(c)	((_ctype_+1)[(unsigned)(c)]&_L)
-#define	isdigit(c)	((_ctype_+1)[(unsigned)(c)]&_N)
-#define	isxdigit(c)	((_ctype_+1)[(unsigned)(c)]&(_X|_N))
-#define	isspace(c)	((_ctype_+1)[(unsigned)(c)]&_S)
-#define ispunct(c)	((_ctype_+1)[(unsigned)(c)]&_P)
-#define isalnum(c)	((_ctype_+1)[(unsigned)(c)]&(_U|_L|_N))
-#define isprint(c)	((_ctype_+1)[(unsigned)(c)]&(_P|_U|_L|_N|_B))
-#define	isgraph(c)	((_ctype_+1)[(unsigned)(c)]&(_P|_U|_L|_N))
-#define iscntrl(c)	((_ctype_+1)[(unsigned)(c)]&_C)
-/* Non-gcc versions will get the library versions, and will be
-   slightly slower */
-#ifdef __GNUC__
-# define toupper(c) \
-	__extension__ ({ int __x = (c); islower(__x) ? (__x - 'a' + 'A') : __x;})
-# define tolower(c) \
-	__extension__ ({ int __x = (c); isupper(__x) ? (__x - 'A' + 'a') : __x;})
-#endif
-#endif /* !__cplusplus */
-
-#ifndef __STRICT_ANSI__
-#define isascii(c)	((unsigned)(c)<=0177)
-#define toascii(c)	((c)&0177)
-#endif
-
-_END_STD_C
-
-#endif /* _CTYPE_H_ */
diff --git a/newlib/libc/include/dirent.h b/newlib/libc/include/dirent.h
deleted file mode 100644
index 6fefc03cb..000000000
--- a/newlib/libc/include/dirent.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _DIRENT_H_
-#define _DIRENT_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <sys/dirent.h>
-
-#if !defined(MAXNAMLEN) && !defined(_POSIX_SOURCE)
-#define MAXNAMLEN 1024
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*_DIRENT_H_*/
diff --git a/newlib/libc/include/envz.h b/newlib/libc/include/envz.h
deleted file mode 100644
index e6a31c31d..000000000
--- a/newlib/libc/include/envz.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <errno.h>
-#include <sys/types.h>
-
-/* The newlib implementation of these functions assumes that sizeof(char) == 1. */
-char * envz_entry (const char *envz, size_t envz_len, const char *name);
-char * envz_get (const char *envz, size_t envz_len, const char *name);
-error_t envz_add (char **envz, size_t *envz_len, const char *name, const char *value);
-error_t envz_merge (char **envz, size_t *envz_len, const char *envz2, size_t envz2_len, int override);
-void envz_remove(char **envz, size_t *envz_len, const char *name);
-void envz_strip (char **envz, size_t *envz_len);
diff --git a/newlib/libc/include/errno.h b/newlib/libc/include/errno.h
deleted file mode 100644
index 7cc2ca86f..000000000
--- a/newlib/libc/include/errno.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ERRNO_H__
-#define __ERRNO_H__
-
-#ifndef __error_t_defined
-typedef int error_t;
-#define __error_t_defined 1
-#endif
-
-#include <sys/errno.h>
-
-#endif /* !__ERRNO_H__ */
diff --git a/newlib/libc/include/fastmath.h b/newlib/libc/include/fastmath.h
deleted file mode 100644
index 95eea5f34..000000000
--- a/newlib/libc/include/fastmath.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _FASTMATH_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define _FASTMATH_H_
-
-#include <math.h>
-#include <machine/fastmath.h>
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FASTMATH_H_ */
diff --git a/newlib/libc/include/fcntl.h b/newlib/libc/include/fcntl.h
deleted file mode 100644
index 86a916775..000000000
--- a/newlib/libc/include/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <sys/fcntl.h>
diff --git a/newlib/libc/include/grp.h b/newlib/libc/include/grp.h
deleted file mode 100644
index e453dca78..000000000
--- a/newlib/libc/include/grp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*	$NetBSD: grp.h,v 1.7 1995/04/29 05:30:40 cgd Exp $	*/
-
-/*-
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- * (c) UNIX System Laboratories, Inc.
- * All or some portions of this file are derived from material licensed
- * to the University of California by American Telephone and Telegraph
- * Co. or Unix System Laboratories, Inc. and are reproduced herein with
- * the permission of UNIX System Laboratories, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)grp.h	8.2 (Berkeley) 1/21/94
- */
-
-#ifndef _GRP_H_
-#define	_GRP_H_
-
-#include <sys/types.h>
-#ifdef __CYGWIN__
-#include <cygwin/grp.h>
-#endif
-
-#if !defined(_POSIX_SOURCE) && !defined(_XOPEN_SOURCE)
-#define	_PATH_GROUP		"/etc/group"
-#endif
-
-struct group {
-	char	*gr_name;		/* group name */
-	char	*gr_passwd;		/* group password */
-	gid_t	gr_gid;			/* group id */
-	char	**gr_mem;		/* group members */
-};
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef __INSIDE_CYGWIN__
-struct group	*getgrgid (gid_t);
-struct group	*getgrnam (const char *);
-#ifndef __CYGWIN__
-int		 getgrnam_r (const char *, struct group *,
-			char *, size_t, struct group **);
-int		 getgrgid_r (gid_t, struct group *,
-			char *, size_t, struct group **);
-#endif /* !__CYGWIN__ */
-#ifndef _POSIX_SOURCE
-struct group	*getgrent (void);
-void		 setgrent (void);
-void		 endgrent (void);
-#ifndef __CYGWIN__
-void		 setgrfile (const char *);
-#endif /* !__CYGWIN__ */
-#ifndef _XOPEN_SOURCE
-#ifndef __CYGWIN__
-char		*group_from_gid (gid_t, int);
-int		 setgroupent (int);
-#endif /* !__CYGWIN__ */
-int		 initgroups (const char *, gid_t);
-#endif /* !_XOPEN_SOURCE */
-#endif /* !_POSIX_SOURCE */
-#endif /* !__INSIDE_CYGWIN__ */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !_GRP_H_ */
diff --git a/newlib/libc/include/ieeefp.h b/newlib/libc/include/ieeefp.h
deleted file mode 100644
index 78bb5bf62..000000000
--- a/newlib/libc/include/ieeefp.h
+++ /dev/null
@@ -1,241 +0,0 @@
-#ifndef _IEEE_FP_H_
-#define _IEEE_FP_H_
-
-#include "_ansi.h"
-
-#include <machine/ieeefp.h>
-
-/* FIXME FIXME FIXME:
-   Neither of __ieee_{float,double}_shape_tape seem to be used anywhere
-   except in libm/test.  If that is the case, please delete these from here.
-   If that is not the case, please insert documentation here describing why
-   they're needed.  */
-
-#ifdef __IEEE_BIG_ENDIAN
-
-typedef union 
-{
-  double value;
-  struct 
-  {
-    unsigned int sign : 1;
-    unsigned int exponent: 11;
-    unsigned int fraction0:4;
-    unsigned int fraction1:16;
-    unsigned int fraction2:16;
-    unsigned int fraction3:16;
-    
-  } number;
-  struct 
-  {
-    unsigned int sign : 1;
-    unsigned int exponent: 11;
-    unsigned int quiet:1;
-    unsigned int function0:3;
-    unsigned int function1:16;
-    unsigned int function2:16;
-    unsigned int function3:16;
-  } nan;
-  struct 
-  {
-    unsigned long msw;
-    unsigned long lsw;
-  } parts;
-    long aslong[2];
-} __ieee_double_shape_type;
-
-#endif
-
-#ifdef __IEEE_LITTLE_ENDIAN
-
-typedef union 
-{
-  double value;
-  struct 
-  {
-#ifdef __SMALL_BITFIELDS
-    unsigned int fraction3:16;
-    unsigned int fraction2:16;
-    unsigned int fraction1:16;
-    unsigned int fraction0: 4;
-#else
-    unsigned int fraction1:32;
-    unsigned int fraction0:20;
-#endif
-    unsigned int exponent :11;
-    unsigned int sign     : 1;
-  } number;
-  struct 
-  {
-#ifdef __SMALL_BITFIELDS
-    unsigned int function3:16;
-    unsigned int function2:16;
-    unsigned int function1:16;
-    unsigned int function0:3;
-#else
-    unsigned int function1:32;
-    unsigned int function0:19;
-#endif
-    unsigned int quiet:1;
-    unsigned int exponent: 11;
-    unsigned int sign : 1;
-  } nan;
-  struct 
-  {
-    unsigned long lsw;
-    unsigned long msw;
-  } parts;
-
-  long aslong[2];
-
-} __ieee_double_shape_type;
-
-#endif
-
-#ifdef __IEEE_BIG_ENDIAN
-
-typedef union
-{
-  float value;
-  struct 
-  {
-    unsigned int sign : 1;
-    unsigned int exponent: 8;
-    unsigned int fraction0: 7;
-    unsigned int fraction1: 16;
-  } number;
-  struct 
-  {
-    unsigned int sign:1;
-    unsigned int exponent:8;
-    unsigned int quiet:1;
-    unsigned int function0:6;
-    unsigned int function1:16;
-  } nan;
-  long p1;
-  
-} __ieee_float_shape_type;
-
-#endif
-
-#ifdef __IEEE_LITTLE_ENDIAN
-
-typedef union
-{
-  float value;
-  struct 
-  {
-    unsigned int fraction0: 7;
-    unsigned int fraction1: 16;
-    unsigned int exponent: 8;
-    unsigned int sign : 1;
-  } number;
-  struct 
-  {
-    unsigned int function1:16;
-    unsigned int function0:6;
-    unsigned int quiet:1;
-    unsigned int exponent:8;
-    unsigned int sign:1;
-  } nan;
-  long p1;
-  
-} __ieee_float_shape_type;
-
-#endif
-
-
-
-
-
-/* FLOATING ROUNDING */
-
-typedef int fp_rnd;
-#define FP_RN 0 	/* Round to nearest 		*/
-#define FP_RM 1		/* Round down 			*/
-#define FP_RP 2		/* Round up 			*/
-#define FP_RZ 3		/* Round to zero (trunate) 	*/
-
-fp_rnd _EXFUN(fpgetround,(void));
-fp_rnd _EXFUN(fpsetround, (fp_rnd));
-
-/* EXCEPTIONS */
-
-typedef int fp_except;
-#define FP_X_INV 0x10	/* Invalid operation 		*/
-#define FP_X_DX  0x80	/* Divide by zero		*/
-#define FP_X_OFL 0x04	/* Overflow exception		*/
-#define FP_X_UFL 0x02	/* Underflow exception		*/
-#define FP_X_IMP 0x01	/* imprecise exception		*/
-
-fp_except _EXFUN(fpgetmask,(void));
-fp_except _EXFUN(fpsetmask,(fp_except));
-fp_except _EXFUN(fpgetsticky,(void));
-fp_except _EXFUN(fpsetsticky, (fp_except));
-
-/* INTEGER ROUNDING */
-
-typedef int fp_rdi;
-#define FP_RDI_TOZ 0	/* Round to Zero 		*/
-#define FP_RDI_RD  1	/* Follow float mode		*/
-
-fp_rdi _EXFUN(fpgetroundtoi,(void));
-fp_rdi _EXFUN(fpsetroundtoi,(fp_rdi));
-
-int _EXFUN(isnan, (double));
-int _EXFUN(isinf, (double));
-int _EXFUN(finite, (double));
-
-
-
-int _EXFUN(isnanf, (float));
-int _EXFUN(isinff, (float));
-int _EXFUN(finitef, (float));
-
-#define __IEEE_DBL_EXPBIAS 1023
-#define __IEEE_FLT_EXPBIAS 127
-
-#define __IEEE_DBL_EXPLEN 11
-#define __IEEE_FLT_EXPLEN 8
-
-
-#define __IEEE_DBL_FRACLEN (64 - (__IEEE_DBL_EXPLEN + 1))
-#define __IEEE_FLT_FRACLEN (32 - (__IEEE_FLT_EXPLEN + 1))
-
-#define __IEEE_DBL_MAXPOWTWO	((double)(1L << 32 - 2) * (1L << (32-11) - 32 + 1))
-#define __IEEE_FLT_MAXPOWTWO	((float)(1L << (32-8) - 1))
-
-#define __IEEE_DBL_NAN_EXP 0x7ff
-#define __IEEE_FLT_NAN_EXP 0xff
-
-
-#define isnanf(x) (((*(long *)&(x) & 0x7f800000L)==0x7f800000L) && \
-		   ((*(long *)&(x) & 0x007fffffL)!=0000000000L))
-
-#define isinff(x) (((*(long *)&(x) & 0x7f800000L)==0x7f800000L) && \
-		   ((*(long *)&(x) & 0x007fffffL)==0000000000L))
-
-#define finitef(x) (((*(long *)&(x) & 0x7f800000L)!=0x7f800000L))
-
-#ifdef _DOUBLE_IS_32BITS
-#undef __IEEE_DBL_EXPBIAS
-#define __IEEE_DBL_EXPBIAS __IEEE_FLT_EXPBIAS
-
-#undef __IEEE_DBL_EXPLEN
-#define __IEEE_DBL_EXPLEN __IEEE_FLT_EXPLEN
-
-#undef __IEEE_DBL_FRACLEN
-#define __IEEE_DBL_FRACLEN __IEEE_FLT_FRACLEN
-
-#undef __IEEE_DBL_MAXPOWTWO
-#define __IEEE_DBL_MAXPOWTWO __IEEE_FLT_MAXPOWTWO
-
-#undef __IEEE_DBL_NAN_EXP
-#define __IEEE_DBL_NAN_EXP __IEEE_FLT_NAN_EXP
-
-#undef __ieee_double_shape_type
-#define __ieee_double_shape_type __ieee_float_shape_type
-
-#endif /* _DOUBLE_IS_32BITS */
-
-#endif /* _IEEE_FP_H_ */
diff --git a/newlib/libc/include/langinfo.h b/newlib/libc/include/langinfo.h
deleted file mode 100644
index 33ae8d0a4..000000000
--- a/newlib/libc/include/langinfo.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*-
- * Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/include/langinfo.h,v 1.5 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef _LANGINFO_H_
-#define	_LANGINFO_H_
-
-#include <sys/cdefs.h>
-
-typedef int nl_item;
-
-/* Extract the category and item index from a constructed `nl_item' value.  */
-#define _NL_ITEM_CATEGORY(item)		((int) (item) >> 16)
-#define _NL_ITEM_INDEX(item)		((int) (item) & 0xffff)
-
-#define	CODESET		0	/* codeset name */
-#define	D_T_FMT		1	/* string for formatting date and time */
-#define	D_FMT		2	/* date format string */
-#define	T_FMT		3	/* time format string */
-#define	T_FMT_AMPM	4	/* a.m. or p.m. time formatting string */
-#define	AM_STR		5	/* Ante Meridian affix */
-#define	PM_STR		6	/* Post Meridian affix */
-
-/* week day names */
-#define	DAY_1		7
-#define	DAY_2		8
-#define	DAY_3		9
-#define	DAY_4		10
-#define	DAY_5		11
-#define	DAY_6		12
-#define	DAY_7		13
-
-/* abbreviated week day names */
-#define	ABDAY_1		14
-#define	ABDAY_2		15
-#define	ABDAY_3		16
-#define	ABDAY_4		17
-#define	ABDAY_5		18
-#define	ABDAY_6		19
-#define	ABDAY_7		20
-
-/* month names */
-#define	MON_1		21
-#define	MON_2		22
-#define	MON_3		23
-#define	MON_4		24
-#define	MON_5		25
-#define	MON_6		26
-#define	MON_7		27
-#define	MON_8		28
-#define	MON_9		29
-#define	MON_10		30
-#define	MON_11		31
-#define	MON_12		32
-
-/* abbreviated month names */
-#define	ABMON_1		33
-#define	ABMON_2		34
-#define	ABMON_3		35
-#define	ABMON_4		36
-#define	ABMON_5		37
-#define	ABMON_6		38
-#define	ABMON_7		39
-#define	ABMON_8		40
-#define	ABMON_9		41
-#define	ABMON_10	42
-#define	ABMON_11	43
-#define	ABMON_12	44
-
-#define	ERA		45	/* era description segments */
-#define	ERA_D_FMT	46	/* era date format string */
-#define	ERA_D_T_FMT	47	/* era date and time format string */
-#define	ERA_T_FMT	48	/* era time format string */
-#define	ALT_DIGITS	49	/* alternative symbols for digits */
-
-#define	RADIXCHAR	50	/* radix char */
-#define	THOUSEP		51	/* separator for thousands */
-
-#define	YESEXPR		52	/* affirmative response expression */
-#define	NOEXPR		53	/* negative response expression */
-#define	YESSTR		54	/* affirmative response for yes/no queries */
-#define	NOSTR		55	/* negative response for yes/no queries */
-
-#define	CRNCYSTR	56	/* currency symbol */
-
-#define	D_MD_ORDER	57	/* month/day order (local extension) */
-
-#define _NL_CTYPE_TRANSLIT_TAB_SIZE 58
-#define _NL_CTYPE_TRANSLIT_FROM_IDX 59
-#define _NL_CTYPE_TRANSLIT_FROM_TBL 60
-#define _NL_CTYPE_TRANSLIT_TO_IDX 61
-#define _NL_CTYPE_TRANSLIT_TO_TBL 62
-#define _NL_CTYPE_TRANSLIT_DEFAULT_MISSING_LEN 63
-#define _NL_CTYPE_TRANSLIT_DEFAULT_MISSING 64
-#define _NL_CTYPE_TRANSLIT_IGNORE_LEN 65
-#define _NL_CTYPE_TRANSLIT_IGNORE 66
-#define _NL_CTYPE_EXTRA_MAP_1 70
-#define _NL_CTYPE_EXTRA_MAP_2 71
-#define _NL_CTYPE_EXTRA_MAP_3 72
-#define _NL_CTYPE_EXTRA_MAP_4 73
-#define _NL_CTYPE_EXTRA_MAP_5 74
-#define _NL_CTYPE_EXTRA_MAP_6 75
-#define _NL_CTYPE_EXTRA_MAP_7 76
-#define _NL_CTYPE_EXTRA_MAP_8 77
-#define _NL_CTYPE_EXTRA_MAP_9 78
-#define _NL_CTYPE_EXTRA_MAP_10 79
-#define _NL_CTYPE_EXTRA_MAP_11 80
-#define _NL_CTYPE_EXTRA_MAP_12 81
-#define _NL_CTYPE_EXTRA_MAP_13 82
-#define _NL_CTYPE_EXTRA_MAP_14 83
-
-__BEGIN_DECLS
-char	*nl_langinfo(nl_item);
-__END_DECLS
-
-#endif /* !_LANGINFO_H_ */
diff --git a/newlib/libc/include/limits.h b/newlib/libc/include/limits.h
deleted file mode 100644
index 53a7a41d6..000000000
--- a/newlib/libc/include/limits.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _LIBC_LIMITS_H_
-# define _LIBC_LIMITS_H_	1
-
-#include <newlib.h>
-
-# ifdef _MB_LEN_MAX
-#  define MB_LEN_MAX	_MB_LEN_MAX
-# else
-#  define MB_LEN_MAX    1
-# endif
-
-/* if do not have #include_next support, then we
-   have to define the limits here. */
-# if !defined __GNUC__ || __GNUC__ < 2
-
-#  ifndef _LIMITS_H
-#   define _LIMITS_H	1
-
-#   include <sys/config.h>
-
-/* Number of bits in a `char'.  */
-#   undef CHAR_BIT
-#   define CHAR_BIT 8
-
-/* Minimum and maximum values a `signed char' can hold.  */
-#   undef SCHAR_MIN
-#   define SCHAR_MIN (-128)
-#   undef SCHAR_MAX
-#   define SCHAR_MAX 127
-
-/* Maximum value an `unsigned char' can hold.  (Minimum is 0).  */
-#   undef UCHAR_MAX
-#   define UCHAR_MAX 255
-
-/* Minimum and maximum values a `char' can hold.  */
-#   ifdef __CHAR_UNSIGNED__
-#    undef CHAR_MIN
-#    define CHAR_MIN 0
-#    undef CHAR_MAX
-#    define CHAR_MAX 255
-#   else
-#    undef CHAR_MIN
-#    define CHAR_MIN (-128)
-#    undef CHAR_MAX
-#    define CHAR_MAX 127
-#   endif
-
-/* Minimum and maximum values a `signed short int' can hold.  */
-#   undef SHRT_MIN
-/* For the sake of 16 bit hosts, we may not use -32768 */
-#   define SHRT_MIN (-32767-1)
-#   undef SHRT_MAX
-#   define SHRT_MAX 32767
-
-/* Maximum value an `unsigned short int' can hold.  (Minimum is 0).  */
-#   undef USHRT_MAX
-#   define USHRT_MAX 65535
-
-/* Minimum and maximum values a `signed int' can hold.  */
-#   ifndef __INT_MAX__
-#    define __INT_MAX__ 2147483647
-#   endif
-#   undef INT_MIN
-#   define INT_MIN (-INT_MAX-1)
-#   undef INT_MAX
-#   define INT_MAX __INT_MAX__
-
-/* Maximum value an `unsigned int' can hold.  (Minimum is 0).  */
-#   undef UINT_MAX
-#   define UINT_MAX (INT_MAX * 2U + 1)
-
-/* Minimum and maximum values a `signed long int' can hold.
-   (Same as `int').  */
-#   ifndef __LONG_MAX__
-#    if defined (__alpha__) || (defined (__sparc__) && defined(__arch64__)) || defined (__sparcv9)
-#     define __LONG_MAX__ 9223372036854775807L
-#    else
-#     define __LONG_MAX__ 2147483647L
-#    endif /* __alpha__ || sparc64 */
-#   endif
-#   undef LONG_MIN
-#   define LONG_MIN (-LONG_MAX-1)
-#   undef LONG_MAX
-#   define LONG_MAX __LONG_MAX__
-
-/* Maximum value an `unsigned long int' can hold.  (Minimum is 0).  */
-#   undef ULONG_MAX
-#   define ULONG_MAX (LONG_MAX * 2UL + 1)
-
-#   ifndef __LONG_LONG_MAX__
-#    define __LONG_LONG_MAX__ 9223372036854775807LL
-#   endif
-
-#   if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-/* Minimum and maximum values a `signed long long int' can hold.  */
-#    undef LLONG_MIN
-#    define LLONG_MIN (-LLONG_MAX-1)
-#    undef LLONG_MAX
-#    define LLONG_MAX __LONG_LONG_MAX__
-
-/* Maximum value an `unsigned long long int' can hold.  (Minimum is 0).  */
-#    undef ULLONG_MAX
-#    define ULLONG_MAX (LLONG_MAX * 2ULL + 1)
-#   endif
-
-#  if defined (__GNU_LIBRARY__) ? defined (__USE_GNU) : !defined (__STRICT_ANSI__)
-/* Minimum and maximum values a `signed long long int' can hold.  */
-#    undef LONG_LONG_MIN
-#    define LONG_LONG_MIN (-LONG_LONG_MAX-1)
-#    undef LONG_LONG_MAX
-#    define LONG_LONG_MAX __LONG_LONG_MAX__
-
-/* Maximum value an `unsigned long long int' can hold.  (Minimum is 0).  */
-#    undef ULONG_LONG_MAX
-#    define ULONG_LONG_MAX (LONG_LONG_MAX * 2ULL + 1)
-#   endif
-
-#  endif /* _LIMITS_H  */
-# endif	 /* GCC 2.  */
-
-#endif	 /* !_LIBC_LIMITS_H_ */
-
-#if defined __GNUC__ && !defined _GCC_LIMITS_H_
-/* `_GCC_LIMITS_H_' is what GCC's file defines.  */
-# include_next <limits.h>
-#endif /* __GNUC__ && !_GCC_LIMITS_H_ */
-
diff --git a/newlib/libc/include/locale.h b/newlib/libc/include/locale.h
deleted file mode 100644
index ebe1422fe..000000000
--- a/newlib/libc/include/locale.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-	locale.h
-	Values appropriate for the formatting of monetary and other
-	numberic quantities.
-*/
-
-#ifndef _LOCALE_H_
-#define _LOCALE_H_
-
-#include "_ansi.h"
-
-#ifndef NULL
-#define NULL    0
-#endif
-
-#define LC_ALL	    0
-#define LC_COLLATE  1
-#define LC_CTYPE    2
-#define LC_MONETARY 3
-#define LC_NUMERIC  4
-#define LC_TIME     5
-#define LC_MESSAGES 6
-
-_BEGIN_STD_C
-
-struct lconv
-{
-  char *decimal_point;
-  char *thousands_sep;
-  char *grouping;
-  char *int_curr_symbol;
-  char *currency_symbol;
-  char *mon_decimal_point;
-  char *mon_thousands_sep;
-  char *mon_grouping;
-  char *positive_sign;
-  char *negative_sign;
-  char int_frac_digits;
-  char frac_digits;
-  char p_cs_precedes;
-  char p_sep_by_space;
-  char n_cs_precedes;
-  char n_sep_by_space;
-  char p_sign_posn;
-  char n_sign_posn;
-};
-
-#ifndef _REENT_ONLY
-char *_EXFUN(setlocale,(int category, const char *locale));
-struct lconv *_EXFUN(localeconv,(void));
-#endif
-
-struct _reent;
-char *_EXFUN(_setlocale_r,(struct _reent *, int category, const char *locale));
-struct lconv *_EXFUN(_localeconv_r,(struct _reent *));
-
-_END_STD_C
-
-#endif /* _LOCALE_H_ */
diff --git a/newlib/libc/include/machine/ansi.h b/newlib/libc/include/machine/ansi.h
deleted file mode 100644
index 737b6d066..000000000
--- a/newlib/libc/include/machine/ansi.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy header file to support BSD compiler */
diff --git a/newlib/libc/include/machine/fastmath.h b/newlib/libc/include/machine/fastmath.h
deleted file mode 100644
index b13befa22..000000000
--- a/newlib/libc/include/machine/fastmath.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifdef __sysvnecv70_target
-double EXFUN(fast_sin,(double));
-double EXFUN(fast_cos,(double));
-double EXFUN(fast_tan,(double));
-
-double EXFUN(fast_asin,(double));
-double EXFUN(fast_acos,(double));
-double EXFUN(fast_atan,(double));
-
-double EXFUN(fast_sinh,(double));
-double EXFUN(fast_cosh,(double));
-double EXFUN(fast_tanh,(double));
-
-double EXFUN(fast_asinh,(double));
-double EXFUN(fast_acosh,(double));
-double EXFUN(fast_atanh,(double));
-
-double EXFUN(fast_abs,(double));
-double EXFUN(fast_sqrt,(double));
-double EXFUN(fast_exp2,(double));
-double EXFUN(fast_exp10,(double));
-double EXFUN(fast_expe,(double));
-double EXFUN(fast_log10,(double));
-double EXFUN(fast_log2,(double));
-double EXFUN(fast_loge,(double));
-
-
-#define	sin(x)		fast_sin(x)
-#define	cos(x)		fast_cos(x)
-#define	tan(x)		fast_tan(x)
-#define	asin(x)		fast_asin(x)
-#define	acos(x)		fast_acos(x)
-#define	atan(x)		fast_atan(x)
-#define	sinh(x)		fast_sinh(x)
-#define	cosh(x)		fast_cosh(x)
-#define	tanh(x)		fast_tanh(x)
-#define	asinh(x)	fast_asinh(x)
-#define	acosh(x)	fast_acosh(x)
-#define	atanh(x)	fast_atanh(x)
-#define	abs(x)		fast_abs(x)
-#define	sqrt(x)		fast_sqrt(x)
-#define	exp2(x)		fast_exp2(x)
-#define	exp10(x)	fast_exp10(x)
-#define	expe(x)		fast_expe(x)
-#define	log10(x)	fast_log10(x)
-#define	log2(x)		fast_log2(x)
-#define	loge(x)		fast_loge(x)
-
-#ifdef _HAVE_STDC
-/* These functions are in assembler, they really do take floats. This
-   can only be used with a real ANSI compiler */
-
-float EXFUN(fast_sinf,(float));
-float EXFUN(fast_cosf,(float));
-float EXFUN(fast_tanf,(float));
-
-float EXFUN(fast_asinf,(float));
-float EXFUN(fast_acosf,(float));
-float EXFUN(fast_atanf,(float));
-
-float EXFUN(fast_sinhf,(float));
-float EXFUN(fast_coshf,(float));
-float EXFUN(fast_tanhf,(float));
-
-float EXFUN(fast_asinhf,(float));
-float EXFUN(fast_acoshf,(float));
-float EXFUN(fast_atanhf,(float));
-
-float EXFUN(fast_absf,(float));
-float EXFUN(fast_sqrtf,(float));
-float EXFUN(fast_exp2f,(float));
-float EXFUN(fast_exp10f,(float));
-float EXFUN(fast_expef,(float));
-float EXFUN(fast_log10f,(float));
-float EXFUN(fast_log2f,(float));
-float EXFUN(fast_logef,(float));
-#define	sinf(x)		fast_sinf(x)
-#define	cosf(x)		fast_cosf(x)
-#define	tanf(x)		fast_tanf(x)
-#define	asinf(x)	fast_asinf(x)
-#define	acosf(x)	fast_acosf(x)
-#define	atanf(x)	fast_atanf(x)
-#define	sinhf(x)	fast_sinhf(x)
-#define	coshf(x)	fast_coshf(x)
-#define	tanhf(x)	fast_tanhf(x)
-#define	asinhf(x)	fast_asinhf(x)
-#define	acoshf(x)	fast_acoshf(x)
-#define	atanhf(x)	fast_atanhf(x)
-#define	absf(x)		fast_absf(x)
-#define	sqrtf(x)	fast_sqrtf(x)
-#define	exp2f(x)	fast_exp2f(x)
-#define	exp10f(x)	fast_exp10f(x)
-#define	expef(x)	fast_expef(x)
-#define	log10f(x)	fast_log10f(x)
-#define	log2f(x)	fast_log2f(x)
-#define	logef(x)	fast_logef(x)
-#endif
-/* Override the functions defined in math.h */
-#endif /* __sysvnecv70_target */
-
diff --git a/newlib/libc/include/machine/ieeefp.h b/newlib/libc/include/machine/ieeefp.h
deleted file mode 100644
index 573cc28de..000000000
--- a/newlib/libc/include/machine/ieeefp.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef __IEEE_BIG_ENDIAN
-#ifndef __IEEE_LITTLE_ENDIAN
-
-/* This file can define macros to choose variations of the IEEE float
-   format:
-
-   _FLT_LARGEST_EXPONENT_IS_NORMAL
-
-	Defined if the float format uses the largest exponent for finite
-	numbers rather than NaN and infinity representations.  Such a
-	format cannot represent NaNs or infinities at all, but it's FLT_MAX
-	is twice the IEEE value.
-
-   _FLT_NO_DENORMALS
-
-	Defined if the float format does not support IEEE denormals.  Every
-	float with a zero exponent is taken to be a zero representation.
- 
-   ??? At the moment, there are no equivalent macros above for doubles and
-   the macros are not fully supported by --enable-newlib-hw-fp.
-
-   __IEEE_BIG_ENDIAN
-
-        Defined if the float format is big endian.  This is mutually exclusive
-        with __IEEE_LITTLE_ENDIAN.
-
-   __IEEE_LITTLE_ENDIAN
- 
-        Defined if the float format is little endian.  This is mutually exclusive
-        with __IEEE_BIG_ENDIAN.
-
-   Note that one of __IEEE_BIG_ENDIAN or __IEEE_LITTLE_ENDIAN must be specified for a
-   platform or error will occur.
-
-   __IEEE_BYTES_LITTLE_ENDIAN
-
-        This flag is used in conjunction with __IEEE_BIG_ENDIAN to describe a situation 
-	whereby multiple words of an IEEE floating point are in big endian order, but the
-	words themselves are little endian with respect to the bytes.
-
-   _DOUBLE_IS_32_BITS 
-
-        This is used on platforms that support double by using the 32-bit IEEE
-        float type.
-
-   _FLOAT_ARG
-
-        This represents what type a float arg is passed as.  It is used when the type is
-        not promoted to double.
-	
-*/
-
-#if (defined(__arm__) || defined(__thumb__)) && !defined(__MAVERICK__)
-/* ARM always has big-endian words.  Within those words the byte ordering
-   will be big or little endian depending upon the target.  */
-#define __IEEE_BIG_ENDIAN
-#ifdef __ARMEL__
-#define __IEEE_BYTES_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __hppa__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __sparc__
-#ifdef __LITTLE_ENDIAN_DATA__
-#define __IEEE_LITTLE_ENDIAN
-#else
-#define __IEEE_BIG_ENDIAN
-#endif
-#endif
-
-#if defined(__m68k__) || defined(__mc68000__)
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#if defined(__mc68hc11__) || defined(__mc68hc12__) || defined(__mc68hc1x__)
-#define __IEEE_BIG_ENDIAN
-#ifdef __HAVE_SHORT_DOUBLE__
-# define _DOUBLE_IS_32BITS
-#endif
-#endif
-
-#if defined (__H8300__) || defined (__H8300H__) || defined (__H8300S__) || defined (__H8500__)
-#define __IEEE_BIG_ENDIAN
-#define _FLOAT_ARG float
-#define _DOUBLE_IS_32BITS
-#endif
-
-#ifdef __sh__
-#ifdef __LITTLE_ENDIAN__
-#define __IEEE_LITTLE_ENDIAN
-#else
-#define __IEEE_BIG_ENDIAN
-#endif
-#if defined(__SH2E__) || defined(__SH3E__) || defined(__SH4_SINGLE_ONLY__)
-#define _DOUBLE_IS_32BITS
-#endif
-#endif
-
-#ifdef _AM29K
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef _WIN32
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __i386__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __i960__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __M32R__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __TIC80__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __MIPSEL__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-#ifdef __MIPSEB__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __MMIX__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __D30V__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-/* necv70 was __IEEE_LITTLE_ENDIAN. */
-
-#ifdef __W65__
-#define __IEEE_LITTLE_ENDIAN
-#define _DOUBLE_IS_32BITS
-#endif
-
-#if defined(__Z8001__) || defined(__Z8002__)
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __m88k__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __mn10300__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __mn10200__
-#define __IEEE_LITTLE_ENDIAN
-#define _DOUBLE_IS_32BITS
-#endif
-
-#ifdef __v800
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __v850
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __D10V__
-#define __IEEE_BIG_ENDIAN
-#if __DOUBLE__ == 32
-#define _DOUBLE_IS_32BITS
-#endif
-#endif
-
-#ifdef __PPC__
-#if (defined(_BIG_ENDIAN) && _BIG_ENDIAN) || (defined(_AIX) && _AIX)
-#define __IEEE_BIG_ENDIAN
-#else
-#if (defined(_LITTLE_ENDIAN) && _LITTLE_ENDIAN) || (defined(__sun__) && __sun__) || (defined(_WIN32) && _WIN32)
-#define __IEEE_LITTLE_ENDIAN
-#endif
-#endif
-#endif
-
-#ifdef __xstormy16__
-#define __IEEE_LITTLE_ENDIAN
-#endif
-
-#ifdef __arc__
-#ifdef __big_endian__
-#define __IEEE_BIG_ENDIAN
-#else
-#define __IEEE_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __fr30__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __mcore__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __frv__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __ia64__
-#ifdef __BIG_ENDIAN__
-#define __IEEE_BIG_ENDIAN
-#else
-#define __IEEE_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __AVR__
-#define __IEEE_LITTLE_ENDIAN
-#define _DOUBLE_IS_32BITS
-#endif
-
-#if defined(__or32__) || defined(__or1k__) || defined(__or16__)
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __IP2K__
-#define __IEEE_BIG_ENDIAN
-#define __SMALL_BITFIELDS
-#define _DOUBLE_IS_32BITS
-#endif
-
-#ifdef __iq2000__
-#define __IEEE_BIG_ENDIAN
-#endif
-
-#ifdef __MAVERICK__
-#ifdef __ARMEL__
-#  define __IEEE_LITTLE_ENDIAN
-#else  /* must be __ARMEB__ */
-#  define __IEEE_BIG_ENDIAN
-#endif /* __ARMEL__ */
-#endif /* __MAVERICK__ */
-
-#ifndef __IEEE_BIG_ENDIAN
-#ifndef __IEEE_LITTLE_ENDIAN
-#error Endianess not declared!!
-#endif /* not __IEEE_LITTLE_ENDIAN */
-#endif /* not __IEEE_BIG_ENDIAN */
-
-#endif /* not __IEEE_LITTLE_ENDIAN */
-#endif /* not __IEEE_BIG_ENDIAN */
-
diff --git a/newlib/libc/include/machine/malloc.h b/newlib/libc/include/machine/malloc.h
deleted file mode 100644
index fdada9ed7..000000000
--- a/newlib/libc/include/machine/malloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef	_MACHMALLOC_H_
-#define	_MACHMALLOC_H_
-
-/* place holder so platforms may add malloc.h extensions */
-
-#endif	/* _MACHMALLOC_H_ */
-
-
diff --git a/newlib/libc/include/machine/setjmp-dj.h b/newlib/libc/include/machine/setjmp-dj.h
deleted file mode 100644
index 9eb6bcf03..000000000
--- a/newlib/libc/include/machine/setjmp-dj.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 1991 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* Modified to use SETJMP_DJ_H rather than SETJMP_H to avoid
-   conflicting with setjmp.h.  Ian Taylor, Cygnus support, April,
-   1993.  */
-
-#ifndef _SETJMP_DJ_H_
-#define _SETJMP_DJ_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
-  unsigned long eax;
-  unsigned long ebx;
-  unsigned long ecx;
-  unsigned long edx;
-  unsigned long esi;
-  unsigned long edi;
-  unsigned long ebp;
-  unsigned long esp;
-  unsigned long eip;
-} jmp_buf[1];
-
-extern int setjmp(jmp_buf);
-extern void longjmp(jmp_buf, int);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/newlib/libc/include/machine/setjmp.h b/newlib/libc/include/machine/setjmp.h
deleted file mode 100644
index e6d5e3944..000000000
--- a/newlib/libc/include/machine/setjmp.h
+++ /dev/null
@@ -1,231 +0,0 @@
-
-_BEGIN_STD_C
-
-#if defined(__arm__) || defined(__thumb__)
-/*
- * All callee preserved registers:
- * v1 - v7, fp, ip, sp, lr, f4, f5, f6, f7
- */
-#define _JBLEN 23
-#endif
-
-#ifdef __sparc__
-/*
- * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext).
- * All else recovered by under/over(flow) handling.
- */
-#define	_JBLEN	13
-#endif
-
-/* necv70 was 9 as well. */
-
-#ifdef __mc68000__
-/*
- * onsstack,sigmask,sp,pc,psl,d2-d7,a2-a6,
- * fp2-fp7	for 68881.
- * All else recovered by under/over(flow) handling.
- */
-#define	_JBLEN	34
-#endif
-
-#if defined(__mc68hc11__) || defined(__mc68hc12__) || defined(__mc68hc1x__)
-/*
- * D, X, Y are not saved.
- * Only take into account the pseudo soft registers (max 32).
- */
-#define _JBLEN  32
-#endif
-
-#if defined(__Z8001__) || defined(__Z8002__)
-/* 16 regs + pc */
-#define _JBLEN 20
-#endif
-
-#ifdef _AM29K
-/*
- * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext).
- * All else recovered by under/over(flow) handling.
- */
-#define	_JBLEN	9
-#endif
-
-#if defined(__CYGWIN__) && !defined (_JBLEN)
-#define _JBLEN (13 * 4)
-#elif defined (__i386__)
-#if defined(__unix__) || defined(__rtems__)
-# define _JBLEN	9
-#else
-#include "setjmp-dj.h"
-#endif
-#endif
-
-#ifdef __i960__
-#define _JBLEN 35
-#endif
-
-#ifdef __M32R__
-/* Only 8 words are currently needed.  10 gives us some slop if we need
-   to expand.  */
-#define _JBLEN 10
-#endif
-
-#ifdef __mips__
-#ifdef __mips64
-#define _JBTYPE long long
-#endif
-#ifdef __mips_soft_float
-#define _JBLEN 11
-#else
-#define _JBLEN 23
-#endif
-#endif
-
-#ifdef __m88000__
-#define _JBLEN 21
-#endif
-
-#ifdef __H8300__
-#define _JBLEN 5
-typedef int jmp_buf[_JBLEN];
-#endif
-
-#ifdef __H8300H__
-/* same as H8/300 but registers are twice as big */
-#define _JBLEN 5
-#define _JBTYPE long
-#endif
-
-#ifdef __H8300S__
-/* same as H8/300 but registers are twice as big */
-#define _JBLEN 5
-#define _JBTYPE long
-#endif
-
-#ifdef __H8500__
-#define _JBLEN 4
-#endif
-
-#ifdef  __sh__
-#if __SH5__
-#define _JBLEN 50
-#define _JBTYPE long long
-#else
-#define _JBLEN 20
-#endif /* __SH5__ */
-#endif
-
-#ifdef  __v800
-#define _JBLEN 28
-#endif
-
-#ifdef __PPC__
-#ifdef __ALTIVEC__
-#define _JBLEN 64
-#else
-#define _JBLEN 32
-#endif
-#define _JBTYPE double
-#endif
-
-#ifdef __hppa__
-/* %r30, %r2-%r18, %r27, pad, %fr12-%fr15.
-   Note space exists for the FP registers, but they are not
-   saved.  */
-#define _JBLEN 28
-#endif
-
-#if defined(__mn10300__) || defined(__mn10200__)
-#ifdef __AM33_2__
-#define _JBLEN 26
-#else
-/* A guess */
-#define _JBLEN 10
-#endif
-#endif
-
-#ifdef __v850
-/* I think our setjmp is saving 15 regs at the moment.  Gives us one word
-   slop if we need to expand.  */
-#define _JBLEN 16
-#endif
-
-#ifdef __TIC80__
-#define _JBLEN 13
-#endif
-
-#ifdef __D10V__
-#define _JBLEN 8
-#endif
-
-#ifdef __D30V__
-#define _JBLEN ((64 /* GPR */ + (2*2) /* ACs */ + 18 /* CRs */) / 2)
-#define _JBTYPE double
-#endif
-
-#ifdef __frv__
-#define _JBLEN (68/2)  /* room for 68 32-bit regs */
-#define _JBTYPE double
-#endif
-
-#ifdef __fr30__
-#define _JBLEN 10
-#endif
-
-#ifdef __iq2000__
-#define _JBLEN 32
-#endif
-
-#ifdef __mcore__
-#define _JBLEN 16
-#endif
-
-#ifdef __MMIX__
-/* Using a layout compatible with GCC's built-in.  */
-#define _JBLEN 5
-#define _JBTYPE unsigned long
-#endif
-
-#ifdef __xstormy16__
-/* 4 GPRs plus SP plus PC. */
-#define _JBLEN 8
-#endif
-
-#ifdef _JBLEN
-#ifdef _JBTYPE
-typedef	_JBTYPE jmp_buf[_JBLEN];
-#else
-typedef	int jmp_buf[_JBLEN];
-#endif
-
-_END_STD_C
-
-#if defined(__CYGWIN__) || defined(__rtems__)
-#include <signal.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* POSIX sigsetjmp/siglongjmp macros */
-typedef int sigjmp_buf[_JBLEN+2];
-
-#define _SAVEMASK	_JBLEN
-#define _SIGMASK	(_JBLEN+1)
-
-#ifdef __CYGWIN__
-# define _CYGWIN_WORKING_SIGSETJMP
-#endif
-
-#define sigsetjmp(env, savemask) ((env)[_SAVEMASK] = savemask,\
-               sigprocmask (SIG_SETMASK, 0, (sigset_t *) ((env) + _SIGMASK)),\
-               setjmp (env))
-
-#define siglongjmp(env, val) ((((env)[_SAVEMASK])?\
-               sigprocmask (SIG_SETMASK, (sigset_t *) ((env) + _SIGMASK), 0):0),\
-               longjmp (env, val))
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* __CYGWIN__ or __rtems__ */
-#endif
diff --git a/newlib/libc/include/machine/stdlib.h b/newlib/libc/include/machine/stdlib.h
deleted file mode 100644
index fa3f3a139..000000000
--- a/newlib/libc/include/machine/stdlib.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef	_MACHSTDLIB_H_
-#define	_MACHSTDLIB_H_
-
-/* place holder so platforms may add stdlib.h extensions */
-
-#endif	/* _MACHSTDLIB_H_ */
-
-
diff --git a/newlib/libc/include/machine/termios.h b/newlib/libc/include/machine/termios.h
deleted file mode 100644
index 41fd45938..000000000
--- a/newlib/libc/include/machine/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#define __MAX_BAUD  B4000000
diff --git a/newlib/libc/include/machine/time.h b/newlib/libc/include/machine/time.h
deleted file mode 100644
index 0caf12655..000000000
--- a/newlib/libc/include/machine/time.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef	_MACHTIME_H_
-#define	_MACHTIME_H_
-
-#if defined(__rtems__)
-#define _CLOCKS_PER_SEC_  sysconf(_SC_CLK_TCK)
-#else  /* !__rtems__ */
-#if defined(__arm__) || defined(__thumb__)
-#define _CLOCKS_PER_SEC_ 100
-#endif
-#endif /* !__rtems__ */
-
-#endif	/* _MACHTIME_H_ */
-
-
diff --git a/newlib/libc/include/machine/types.h b/newlib/libc/include/machine/types.h
deleted file mode 100644
index b573336b7..000000000
--- a/newlib/libc/include/machine/types.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef	_MACHTYPES_H_
-#define	_MACHTYPES_H_
-
-/*
- *  The following section is RTEMS specific and is needed to more
- *  closely match the types defined in the BSD machine/types.h.
- *  This is needed to let the RTEMS/BSD TCP/IP stack compile.
- */
-
-#if defined(__rtems__)
-typedef signed long long   int64_t;
-#if defined( __h8300__)
-typedef signed long        int32_t;
-#else
-typedef signed int         int32_t;
-#endif
-typedef signed short       int16_t;
-typedef signed char        int8_t;
-
-typedef unsigned long long u_int64_t;
-#if defined( __h8300__)
-typedef unsigned long      u_int32_t;
-#else
-typedef unsigned int       u_int32_t;
-#endif
-typedef unsigned short     u_int16_t;
-typedef unsigned char      u_int8_t;
-#endif
-
-#define	_CLOCK_T_	unsigned long		/* clock() */
-#define	_TIME_T_	long			/* time() */
-#define _CLOCKID_T_ 	unsigned long
-#define _TIMER_T_   	unsigned long
-
-#ifndef _HAVE_SYSTYPES
-typedef long int __off_t;
-typedef int __pid_t;
-#ifdef __GNUC__
-__extension__ typedef long long int __loff_t;
-#else
-typedef long int __loff_t;
-#endif
-#endif
-
-#endif	/* _MACHTYPES_H_ */
-
-
diff --git a/newlib/libc/include/malloc.h b/newlib/libc/include/malloc.h
deleted file mode 100644
index c46357c65..000000000
--- a/newlib/libc/include/malloc.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* malloc.h -- header file for memory routines.  */
-
-#ifndef _INCLUDE_MALLOC_H_
-#define _INCLUDE_MALLOC_H_
-
-#include <_ansi.h>
-#include <sys/reent.h>
-
-#define __need_size_t
-#include <stddef.h>
-
-/* include any machine-specific extensions */
-#include <machine/malloc.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* This version of struct mallinfo must match the one in
-   libc/stdlib/mallocr.c.  */
-
-struct mallinfo {
-  int arena;    /* total space allocated from system */
-  int ordblks;  /* number of non-inuse chunks */
-  int smblks;   /* unused -- always zero */
-  int hblks;    /* number of mmapped regions */
-  int hblkhd;   /* total space in mmapped regions */
-  int usmblks;  /* unused -- always zero */
-  int fsmblks;  /* unused -- always zero */
-  int uordblks; /* total allocated space */
-  int fordblks; /* total non-inuse space */
-  int keepcost; /* top-most, releasable (via malloc_trim) space */
-};	
-
-/* The routines.  */
-
-extern _PTR malloc _PARAMS ((size_t));
-#ifdef __CYGWIN__
-#undef _malloc_r
-#define _malloc_r(r, s) malloc (s)
-#else
-extern _PTR _malloc_r _PARAMS ((struct _reent *, size_t));
-#endif
-
-extern _VOID free _PARAMS ((_PTR));
-#ifdef __CYGWIN__
-#undef _free_r
-#define _free_r(r, p) free (p)
-#else
-extern _VOID _free_r _PARAMS ((struct _reent *, _PTR));
-#endif
-
-extern _PTR realloc _PARAMS ((_PTR, size_t));
-#ifdef __CYGWIN__
-#undef _realloc_r
-#define _realloc_r(r, p, s) realloc (p, s)
-#else
-extern _PTR _realloc_r _PARAMS ((struct _reent *, _PTR, size_t));
-#endif
-
-extern _PTR calloc _PARAMS ((size_t, size_t));
-#ifdef __CYGWIN__
-#undef _calloc_r
-#define _calloc_r(r, s1, s2) calloc (s1, s2);
-#else
-extern _PTR _calloc_r _PARAMS ((struct _reent *, size_t, size_t));
-#endif
-
-extern _PTR memalign _PARAMS ((size_t, size_t));
-#ifdef __CYGWIN__
-#undef _memalign_r
-#define _memalign_r(r, s1, s2) memalign (s1, s2);
-#else
-extern _PTR _memalign_r _PARAMS ((struct _reent *, size_t, size_t));
-#endif
-
-extern struct mallinfo mallinfo _PARAMS ((void));
-#ifdef __CYGWIN__
-#undef _mallinfo_r
-#define _mallinfo_r(r) mallinfo ()
-#else
-extern struct mallinfo _mallinfo_r _PARAMS ((struct _reent *));
-#endif
-
-extern void malloc_stats _PARAMS ((void));
-#ifdef __CYGWIN__
-#undef _malloc_stats_r
-#define _malloc_stats_r(r) malloc_stats ()
-#else
-extern void _malloc_stats_r _PARAMS ((struct _reent *));
-#endif
-
-extern int mallopt _PARAMS ((int, int));
-#ifdef __CYGWIN__
-#undef _mallopt_r
-#define _mallopt_r(i1, i2) mallopt (i1, i2)
-#else
-extern int _mallopt_r _PARAMS ((struct _reent *, int, int));
-#endif
-
-extern size_t malloc_usable_size _PARAMS ((_PTR));
-#ifdef __CYGWIN__
-#undef _malloc_usable_size_r
-#define _malloc_usable_size_r(r, p) malloc_usable_size (p)
-#else
-extern size_t _malloc_usable_size_r _PARAMS ((struct _reent *, _PTR));
-#endif
-
-/* These aren't too useful on an embedded system, but we define them
-   anyhow.  */
-
-extern _PTR valloc _PARAMS ((size_t));
-#ifdef __CYGWIN__
-#undef _valloc_r
-#define _valloc_r(r, s) valloc (s)
-#else
-extern _PTR _valloc_r _PARAMS ((struct _reent *, size_t));
-#endif
-
-extern _PTR pvalloc _PARAMS ((size_t));
-#ifdef __CYGWIN__
-#undef _pvalloc_r
-#define _pvalloc_r(r, s) pvalloc (s)
-#else
-extern _PTR _pvalloc_r _PARAMS ((struct _reent *, size_t));
-#endif
-
-extern int malloc_trim _PARAMS ((size_t));
-#ifdef __CYGWIN__
-#undef _malloc_trim_r
-#define _malloc_trim_r(r, s) malloc_trim (s)
-#else
-extern int _malloc_trim_r _PARAMS ((struct _reent *, size_t));
-#endif
-
-/* A compatibility routine for an earlier version of the allocator.  */
-
-extern _VOID mstats _PARAMS ((char *));
-#ifdef __CYGWIN__
-#undef _mstats_r
-#define _mstats_r(r, p) mstats (p)
-#else
-extern _VOID _mstats_r _PARAMS ((struct _reent *, char *));
-#endif
-
-/* SVID2/XPG mallopt options */
-
-#define M_MXFAST  1    /* UNUSED in this malloc */
-#define M_NLBLKS  2    /* UNUSED in this malloc */
-#define M_GRAIN   3    /* UNUSED in this malloc */
-#define M_KEEP    4    /* UNUSED in this malloc */
-
-/* mallopt options that actually do something */
-  
-#define M_TRIM_THRESHOLD    -1
-#define M_TOP_PAD           -2
-#define M_MMAP_THRESHOLD    -3 
-#define M_MMAP_MAX          -4
-
-#ifndef __CYGWIN__
-/* Some systems provide this, so do too for compatibility.  */
-extern void cfree _PARAMS ((_PTR));
-#endif /* __CYGWIN__ */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _INCLUDE_MALLOC_H_ */
diff --git a/newlib/libc/include/math.h b/newlib/libc/include/math.h
deleted file mode 100644
index dbbae0048..000000000
--- a/newlib/libc/include/math.h
+++ /dev/null
@@ -1,373 +0,0 @@
-/* math.h -- Definitions for the math floating point package.  */
-
-#ifndef  _MATH_H_
-#define  _MATH_H_
-
-#include <sys/reent.h>
-#include <machine/ieeefp.h>
-#include "_ansi.h"
-
-_BEGIN_STD_C
-
-#ifndef HUGE_VAL
-
-/* Define HUGE_VAL as infinity, unless HUGE_VAL is already defined
-   (which might have been done by something like math-68881.h).  */
-
-union __dmath
-{
-  __ULong i[2];
-  double d;
-};
-
-/* Declare this as an array without bounds so that no matter what small data
-   support a port and/or library has, this reference will be via the general
-   method for accessing globals. */
-extern __IMPORT const union __dmath __infinity[];
-
-#define HUGE_VAL (__infinity[0].d)
-
-#endif /* ! defined (HUGE_VAL) */
-
-/* Reentrant ANSI C functions.  */
-
-#ifndef __math_68881
-extern double atan _PARAMS((double));
-extern double cos _PARAMS((double));
-extern double sin _PARAMS((double));
-extern double tan _PARAMS((double));
-extern double tanh _PARAMS((double));
-extern double frexp _PARAMS((double, int *));
-extern double modf _PARAMS((double, double *));
-extern double ceil _PARAMS((double));
-extern double fabs _PARAMS((double));
-extern double floor _PARAMS((double));
-#endif /* ! defined (__math_68881) */
-
-/* Non reentrant ANSI C functions.  */
-
-#ifndef _REENT_ONLY
-#ifndef __math_6881
-extern double acos _PARAMS((double));
-extern double asin _PARAMS((double));
-extern double atan2 _PARAMS((double, double));
-extern double cosh _PARAMS((double));
-extern double sinh _PARAMS((double));
-extern double exp _PARAMS((double));
-extern double ldexp _PARAMS((double, int));
-extern double log _PARAMS((double));
-extern double log10 _PARAMS((double));
-extern double pow _PARAMS((double, double));
-extern double sqrt _PARAMS((double));
-extern double fmod _PARAMS((double, double));
-#endif /* ! defined (__math_68881) */
-#endif /* ! defined (_REENT_ONLY) */
-
-#ifndef __STRICT_ANSI__
-
-/* ISO C99 types and macros. */
-
-#ifndef FLT_EVAL_METHOD
-#define FLT_EVAL_METHOD 0
-typedef float float_t;
-typedef double double_t;
-#endif /* FLT_EVAL_METHOD */
-
-#define FP_NAN         0
-#define FP_INFINITE    1
-#define FP_ZERO        2
-#define FP_SUBNORMAL   3
-#define FP_NORMAL      4
-
-extern int __fpclassifyf (float x);
-extern int __fpclassifyd (double x);
-extern int __signbitf (float x);
-extern int __signbitd (double x);
-
-#define fpclassify(x) \
-          (__extension__ ({__typeof__(x) __x = (x); \
-                           (sizeof (__x) == sizeof (float))  ? __fpclassifyf(__x) : __fpclassifyd(__x);}))
-
-#define isfinite(x) \
-          (__extension__ ({__typeof__(x) __x = (x); \
-                           fpclassify(__x) != FP_INFINITE && fpclassify(__x) != FP_NAN;}))
-#define isnormal(x) \
-          (__extension__ ({__typeof__(x) __x = (x); \
-                           fpclassify(__x) == FP_NORMAL;}))
-#define signbit(x) \
-          (__extension__ ({__typeof__(x) __x = (x); \
-                           (sizeof(__x) == sizeof(float)) ? __signbitf(__x) : __signbitd(__x);}))
-
-#define isgreater(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           !isunordered(__x,__y) && (__x > __y);}))
-#define isgreaterequal(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           !isunordered(__x,__y) && (__x >= __y);}))
-#define isless(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           !isunordered(__x,__y) && (__x < __y);}))
-#define islessequal(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           !isunordered(__x,__y) && (__x <= __y);}))
-#define islessgreater(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           !isunordered(__x,__y) && (__x < __y || __x > __y);}))
-
-#define isunordered(x,y) \
-          (__extension__ ({__typeof__(x) __x = (x); __typeof__(y) __y = (y); \
-                           fpclassify(__x) == FP_NAN || fpclassify(__y) == FP_NAN;}))
-
-/* Non ANSI double precision functions.  */
-
-extern double infinity _PARAMS((void));
-extern double nan _PARAMS((const char *));
-extern int isnan _PARAMS((double));
-extern int isinf _PARAMS((double));
-extern int finite _PARAMS((double));
-extern double copysign _PARAMS((double, double));
-extern int ilogb _PARAMS((double));
-
-extern double asinh _PARAMS((double));
-extern double cbrt _PARAMS((double));
-extern double nextafter _PARAMS((double, double));
-extern double rint _PARAMS((double));
-extern double scalbn _PARAMS((double, int));
-
-extern double exp2 _PARAMS((double));
-extern double scalbln _PARAMS((double, long int));
-extern double tgamma _PARAMS((double));
-extern double nearbyint _PARAMS((double));
-extern long int lrint _PARAMS((double));
-extern double round _PARAMS((double));
-extern long int lround _PARAMS((double));
-extern double trunc _PARAMS((double));
-extern double remquo _PARAMS((double, double, int *));
-extern double copysign _PARAMS((double, double));
-extern double fdim _PARAMS((double, double));
-extern double fmax _PARAMS((double, double));
-extern double fmin _PARAMS((double, double));
-extern double fma _PARAMS((double, double, double));
-extern void sincos _PARAMS((double, double *, double *));
-
-#ifndef __math_68881
-extern double log1p _PARAMS((double));
-extern double expm1 _PARAMS((double));
-#endif /* ! defined (__math_68881) */
-
-#ifndef _REENT_ONLY
-extern double acosh _PARAMS((double));
-extern double atanh _PARAMS((double));
-extern double remainder _PARAMS((double, double));
-extern double gamma _PARAMS((double));
-extern double gamma_r _PARAMS((double, int *));
-extern double lgamma _PARAMS((double));
-extern double lgamma_r _PARAMS((double, int *));
-extern double erf _PARAMS((double));
-extern double erfc _PARAMS((double));
-extern double y0 _PARAMS((double));
-extern double y1 _PARAMS((double));
-extern double yn _PARAMS((int, double));
-extern double j0 _PARAMS((double));
-extern double j1 _PARAMS((double));
-extern double jn _PARAMS((int, double));
-#define log2(x) (log (x) / M_LOG2_E)
-
-#ifndef __math_68881
-extern double hypot _PARAMS((double, double));
-#endif
-
-extern double cabs();
-extern double drem _PARAMS((double, double));
-
-#endif /* ! defined (_REENT_ONLY) */
-
-#endif /* ! defined (__STRICT_ANSI__) */
-
-#if !defined(__STRICT_ANSI__) || defined(__cplusplus)
-
-/* Single precision versions of ANSI functions.  */
-
-extern float atanf _PARAMS((float));
-extern float cosf _PARAMS((float));
-extern float sinf _PARAMS((float));
-extern float tanf _PARAMS((float));
-extern float tanhf _PARAMS((float));
-extern float frexpf _PARAMS((float, int *));
-extern float modff _PARAMS((float, float *));
-extern float ceilf _PARAMS((float));
-extern float fabsf _PARAMS((float));
-extern float floorf _PARAMS((float));
-
-#ifndef _REENT_ONLY
-extern float acosf _PARAMS((float));
-extern float asinf _PARAMS((float));
-extern float atan2f _PARAMS((float, float));
-extern float coshf _PARAMS((float));
-extern float sinhf _PARAMS((float));
-extern float expf _PARAMS((float));
-extern float ldexpf _PARAMS((float, int));
-extern float logf _PARAMS((float));
-extern float log10f _PARAMS((float));
-extern float powf _PARAMS((float, float));
-extern float sqrtf _PARAMS((float));
-extern float fmodf _PARAMS((float, float));
-#endif /* ! defined (_REENT_ONLY) */
-
-#endif /* !defined(__STRICT_ANSI__) || defined(__cplusplus) */
-
-#ifndef __STRICT_ANSI__
-
-/* Other single precision functions.  */
-
-extern float exp2f _PARAMS((float));
-extern float scalblnf _PARAMS((float, long int));
-extern float tgammaf _PARAMS((float));
-extern float nearbyintf _PARAMS((float));
-extern long int lrintf _PARAMS((float));
-extern float roundf _PARAMS((float));
-extern long int lroundf _PARAMS((float));
-extern float truncf _PARAMS((float));
-extern float remquof _PARAMS((float, float, int *));
-extern float copysignf _PARAMS((float, float));
-extern float fdimf _PARAMS((float, float));
-extern float fmaxf _PARAMS((float, float));
-extern float fminf _PARAMS((float, float));
-extern float fmaf _PARAMS((float, float, float));
-
-extern float infinityf _PARAMS((void));
-extern float nanf _PARAMS((const char *));
-extern int isnanf _PARAMS((float));
-extern int isinff _PARAMS((float));
-extern int finitef _PARAMS((float));
-extern float copysignf _PARAMS((float, float));
-extern int ilogbf _PARAMS((float));
-
-extern float asinhf _PARAMS((float));
-extern float cbrtf _PARAMS((float));
-extern float nextafterf _PARAMS((float, float));
-extern float rintf _PARAMS((float));
-extern float scalbnf _PARAMS((float, int));
-extern float log1pf _PARAMS((float));
-extern float expm1f _PARAMS((float));
-extern void sincosf _PARAMS((float, float *, float *));
-
-#ifndef _REENT_ONLY
-extern float acoshf _PARAMS((float));
-extern float atanhf _PARAMS((float));
-extern float remainderf _PARAMS((float, float));
-extern float gammaf _PARAMS((float));
-extern float gammaf_r _PARAMS((float, int *));
-extern float lgammaf _PARAMS((float));
-extern float lgammaf_r _PARAMS((float, int *));
-extern float erff _PARAMS((float));
-extern float erfcf _PARAMS((float));
-extern float y0f _PARAMS((float));
-extern float y1f _PARAMS((float));
-extern float ynf _PARAMS((int, float));
-extern float j0f _PARAMS((float));
-extern float j1f _PARAMS((float));
-extern float jnf _PARAMS((int, float));
-#define log2f(x) (logf (x) / (float) M_LOG2_E)
-extern float hypotf _PARAMS((float, float));
-
-extern float cabsf();
-extern float dremf _PARAMS((float, float));
-
-#endif /* ! defined (_REENT_ONLY) */
-
-/* The gamma functions use a global variable, signgam.  */
-#ifndef _REENT_ONLY
-#define signgam (*__signgam())
-extern int *__signgam _PARAMS((void));
-#endif /* ! defined (_REENT_ONLY) */
-
-#define __signgam_r(ptr) _REENT_SIGNGAM(ptr)
-
-/* The exception structure passed to the matherr routine.  */
-
-#ifdef __cplusplus
-struct __exception 
-#else
-struct exception 
-#endif
-{
-  int type;
-  char *name;
-  double arg1;
-  double arg2;
-  double retval;
-  int err;
-};
-
-#ifdef __cplusplus
-extern int matherr _PARAMS((struct __exception *e));
-#else
-extern int matherr _PARAMS((struct exception *e));
-#endif
-
-/* Values for the type field of struct exception.  */
-
-#define DOMAIN 1
-#define SING 2
-#define OVERFLOW 3
-#define UNDERFLOW 4
-#define TLOSS 5
-#define PLOSS 6
-
-/* Useful constants.  */
-
-#define MAXFLOAT	3.40282347e+38F
-
-#define M_E		2.7182818284590452354
-#define M_LOG2E		1.4426950408889634074
-#define M_LOG10E	0.43429448190325182765
-#define M_LN2		0.69314718055994530942
-#define M_LN10		2.30258509299404568402
-#define M_PI		3.14159265358979323846
-#define M_TWOPI         (M_PI * 2.0)
-#define M_PI_2		1.57079632679489661923
-#define M_PI_4		0.78539816339744830962
-#define M_3PI_4		2.3561944901923448370E0
-#define M_SQRTPI        1.77245385090551602792981
-#define M_1_PI		0.31830988618379067154
-#define M_2_PI		0.63661977236758134308
-#define M_2_SQRTPI	1.12837916709551257390
-#define M_SQRT2		1.41421356237309504880
-#define M_SQRT1_2	0.70710678118654752440
-#define M_LN2LO         1.9082149292705877000E-10
-#define M_LN2HI         6.9314718036912381649E-1
-#define M_SQRT3   	1.73205080756887719000
-#define M_IVLN10        0.43429448190325182765 /* 1 / log(10) */
-#define M_LOG2_E        0.693147180559945309417
-#define M_INVLN2        1.4426950408889633870E0  /* 1 / log(2) */
-
-/* Global control over fdlibm error handling.  */
-
-enum __fdlibm_version
-{
-  __fdlibm_ieee = -1,
-  __fdlibm_svid,
-  __fdlibm_xopen,
-  __fdlibm_posix
-};
-
-#define _LIB_VERSION_TYPE enum __fdlibm_version
-#define _LIB_VERSION __fdlib_version
-
-extern __IMPORT _CONST _LIB_VERSION_TYPE _LIB_VERSION;
-
-#define _IEEE_  __fdlibm_ieee
-#define _SVID_  __fdlibm_svid
-#define _XOPEN_ __fdlibm_xopen
-#define _POSIX_ __fdlibm_posix
-
-#endif /* ! defined (__STRICT_ANSI__) */
-
-_END_STD_C
-
-#ifdef __FAST_MATH__
-#include <machine/fastmath.h>
-#endif
-
-#endif /* _MATH_H_ */
diff --git a/newlib/libc/include/newlib.h b/newlib/libc/include/newlib.h
deleted file mode 100644
index d4fffb169..000000000
--- a/newlib/libc/include/newlib.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* dummy file for external tools to use.  Real file is created by
-   newlib configuration. */
diff --git a/newlib/libc/include/paths.h b/newlib/libc/include/paths.h
deleted file mode 100644
index 36cf78a9b..000000000
--- a/newlib/libc/include/paths.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef	_PATHS_H_
-#define _PATHS_H_
-
-#define _PATH_DEV	"/dev/"
-#define _PATH_BSHELL    "/bin/sh"
-
-#endif /* _PATHS_H_ */
diff --git a/newlib/libc/include/process.h b/newlib/libc/include/process.h
deleted file mode 100644
index a73564a33..000000000
--- a/newlib/libc/include/process.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* process.h.  This file comes with MSDOS and WIN32 systems.  */
-
-#ifndef __PROCESS_H_
-#define __PROCESS_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int execl(const char *path, const char *argv0, ...);
-int execle(const char *path, const char *argv0, ... /*, char * const *envp */);
-int execlp(const char *path, const char *argv0, ...);
-int execlpe(const char *path, const char *argv0, ... /*, char * const *envp */);
-
-int execv(const char *path, char * const *argv);
-int execve(const char *path, char * const *argv, char * const *envp);
-int execvp(const char *path, char * const *argv);
-int execvpe(const char *path, char * const *argv, char * const *envp);
-
-int spawnl(int mode, const char *path, const char *argv0, ...);
-int spawnle(int mode, const char *path, const char *argv0, ... /*, char * const *envp */);
-int spawnlp(int mode, const char *path, const char *argv0, ...);
-int spawnlpe(int mode, const char *path, const char *argv0, ... /*, char * const *envp */);
-
-int spawnv(int mode, const char *path, const char * const *argv);
-int spawnve(int mode, const char *path, const char * const *argv, const char * const *envp);
-int spawnvp(int mode, const char *path, const char * const *argv);
-int spawnvpe(int mode, const char *path, const char * const *argv, const char * const *envp);
-
-int cwait(int *, int, int);
-
-#define _P_WAIT		1
-#define _P_NOWAIT	2	/* always generates error */
-#define _P_OVERLAY	3
-#define _P_NOWAITO	4
-#define _P_DETACH	5
-
-#define WAIT_CHILD 1
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/newlib/libc/include/pthread.h b/newlib/libc/include/pthread.h
deleted file mode 100644
index 05ff38b11..000000000
--- a/newlib/libc/include/pthread.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*  pthread.h
- *
- *  Written by Joel Sherrill <joel@OARcorp.com>.
- *
- *  COPYRIGHT (c) 1989-2000.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  Permission to use, copy, modify, and distribute this software for any
- *  purpose without fee is hereby granted, provided that this entire notice
- *  is included in all copies of any software which is or includes a copy
- *  or modification of this software.
- *
- *  THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- *  WARRANTY.  IN PARTICULAR,  THE AUTHOR MAKES NO REPRESENTATION
- *  OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
- *  SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- *  $Id$
- */
-
-#ifndef __PTHREAD_h
-#define __PTHREAD_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <unistd.h>
-
-#if defined(_POSIX_THREADS)
-
-#include <sys/types.h>
-#include <time.h>
-#include <sys/sched.h>
-
-/* Register Fork Handlers, P1003.1c/Draft 10, P1003.1c/Draft 10, p. 27
-  
-    If an OS does not support processes, then it falls under this provision
-    and may not provide pthread_atfork():
-  
-    "Either the implementation shall support the pthread_atfork() function
-     as described above or the pthread_atfork() funciton shall not be 
-     provided."
-  
-    NOTE: RTEMS does not provide pthread_atfork().  */
-
-#if !defined(__rtems__)
-#warning "Add pthread_atfork() prototype"
-#endif
-
-/* Mutex Initialization Attributes, P1003.1c/Draft 10, p. 81 */
-
-int	_EXFUN(pthread_mutexattr_init, (pthread_mutexattr_t *attr));
-int	_EXFUN(pthread_mutexattr_destroy, (pthread_mutexattr_t *attr));
-int	_EXFUN(pthread_mutexattr_getpshared,
-		(const pthread_mutexattr_t *attr, int  *pshared));
-int	_EXFUN(pthread_mutexattr_setpshared,
-		(pthread_mutexattr_t *attr, int pshared));
-
-/* Initializing and Destroying a Mutex, P1003.1c/Draft 10, p. 87 */
-
-int	_EXFUN(pthread_mutex_init,
-	(pthread_mutex_t *mutex, const pthread_mutexattr_t *attr));
-int	_EXFUN(pthread_mutex_destroy, (pthread_mutex_t *mutex));
-
-/* This is used to statically initialize a pthread_mutex_t. Example:
-  
-    pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
- */
-
-#define PTHREAD_MUTEX_INITIALIZER  ((pthread_mutex_t) 0xFFFFFFFF)
-
-/*  Locking and Unlocking a Mutex, P1003.1c/Draft 10, p. 93
-    NOTE: P1003.4b/D8 adds pthread_mutex_timedlock(), p. 29 */
-
-int	_EXFUN(pthread_mutex_lock, (pthread_mutex_t *mutex));
-int	_EXFUN(pthread_mutex_trylock, (pthread_mutex_t *mutex));
-int	_EXFUN(pthread_mutex_unlock, (pthread_mutex_t *mutex));
-
-#if defined(_POSIX_TIMEOUTS)
-
-int	_EXFUN(pthread_mutex_timedlock,
-	(pthread_mutex_t *mutex, const struct timespec *timeout));
-
-#endif /* _POSIX_TIMEOUTS */
-
-/* Condition Variable Initialization Attributes, P1003.1c/Draft 10, p. 96 */
- 
-int	_EXFUN(pthread_condattr_init, (pthread_condattr_t *attr));
-int	_EXFUN(pthread_condattr_destroy, (pthread_condattr_t *attr));
-int	_EXFUN(pthread_condattr_getpshared,
-		(const pthread_condattr_t *attr, int *pshared));
-int	_EXFUN(pthread_condattr_setpshared,
-		(pthread_condattr_t *attr, int pshared));
- 
-/* Initializing and Destroying a Condition Variable, P1003.1c/Draft 10, p. 87 */
- 
-int	_EXFUN(pthread_cond_init,
-	(pthread_cond_t *cond, const pthread_condattr_t *attr));
-int	_EXFUN(pthread_cond_destroy, (pthread_cond_t *mutex));
- 
-/* This is used to statically initialize a pthread_cond_t. Example:
-  
-    pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
- */
- 
-#define PTHREAD_COND_INITIALIZER  ((pthread_mutex_t) 0xFFFFFFFF)
- 
-/* Broadcasting and Signaling a Condition, P1003.1c/Draft 10, p. 101 */
- 
-int	_EXFUN(pthread_cond_signal, (pthread_cond_t *cond));
-int	_EXFUN(pthread_cond_broadcast, (pthread_cond_t *cond));
- 
-/* Waiting on a Condition, P1003.1c/Draft 10, p. 105 */
- 
-int	_EXFUN(pthread_cond_wait,
-	(pthread_cond_t *cond, pthread_mutex_t *mutex));
- 
-int	_EXFUN(pthread_cond_timedwait,
-		(pthread_cond_t *cond, pthread_mutex_t *mutex,
-		const struct timespec *abstime));
- 
-#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
-
-/* Thread Creation Scheduling Attributes, P1003.1c/Draft 10, p. 120 */
-
-int	_EXFUN(pthread_attr_setscope,
-		(pthread_attr_t *attr, int contentionscope));
-int	_EXFUN(pthread_attr_getscope,
-	(const pthread_attr_t *attr, int *contentionscope));
-int	_EXFUN(pthread_attr_setinheritsched,
-		(pthread_attr_t *attr, int inheritsched));
-int	_EXFUN(pthread_attr_getinheritsched,
-		(const pthread_attr_t *attr, int *inheritsched));
-int	_EXFUN(pthread_attr_setschedpolicy, (pthread_attr_t *attr, int policy));
-int	_EXFUN(pthread_attr_getschedpolicy,
-	(const pthread_attr_t *attr, int *policy));
-
-#endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */
-
-int	_EXFUN(pthread_attr_setschedparam,
-	(pthread_attr_t *attr, const struct sched_param *param));
-int	_EXFUN(pthread_attr_getschedparam,
-	(const pthread_attr_t *attr, struct sched_param *param));
-
-#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
-
-/* Dynamic Thread Scheduling Parameters Access, P1003.1c/Draft 10, p. 124 */
-
-int	_EXFUN(pthread_getschedparam,
-	(pthread_t thread, int *policy, struct sched_param *param));
-int	_EXFUN(pthread_setschedparam,
-	(pthread_t thread, int policy, struct sched_param *param));
-
-#endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */
-
-#if defined(_POSIX_THREAD_PRIO_INHERIT) || defined(_POSIX_THREAD_PRIO_PROTECT)
-
-/* Mutex Initialization Scheduling Attributes, P1003.1c/Draft 10, p. 128 */
- 
-int	_EXFUN(pthread_mutexattr_setprotocol,
-	(pthread_mutexattr_t *attr, int protocol));
-int	_EXFUN(pthread_mutexattr_getprotocol,
-		(const pthread_mutexattr_t *attr, int *protocol));
-int	_EXFUN(pthread_mutexattr_setprioceiling,
-	(pthread_mutexattr_t *attr, int prioceiling));
-int	_EXFUN(pthread_mutexattr_getprioceiling,
-	(const pthread_mutexattr_t *attr, int *prioceiling));
-
-#endif /* _POSIX_THREAD_PRIO_INHERIT || _POSIX_THREAD_PRIO_PROTECT */
-
-#if defined(_POSIX_THREAD_PRIO_PROTECT)
-
-/* Change the Priority Ceiling of a Mutex, P1003.1c/Draft 10, p. 131 */
-
-int	_EXFUN(pthread_mutex_setprioceiling,
-	(pthread_mutex_t *mutex, int prioceiling, int *old_ceiling));
-int	_EXFUN(pthread_mutex_getprioceiling,
-	(pthread_mutex_t *mutex, int *prioceiling));
-
-#endif /* _POSIX_THREAD_PRIO_PROTECT */
-
-/* Thread Creation Attributes, P1003.1c/Draft 10, p, 140 */
-
-int	_EXFUN(pthread_attr_init, (pthread_attr_t *attr));
-int	_EXFUN(pthread_attr_destroy, (pthread_attr_t *attr));
-int	_EXFUN(pthread_attr_getstacksize,
-	(const pthread_attr_t *attr, size_t *stacksize));
-int	_EXFUN(pthread_attr_setstacksize,
-	(pthread_attr_t *attr, size_t stacksize));
-int	_EXFUN(pthread_attr_getstackaddr,
-	(const pthread_attr_t *attr, void **stackaddr));
-int	_EXFUN(pthread_attr_setstackaddr,
-	(pthread_attr_t  *attr, void *stackaddr));
-int	_EXFUN(pthread_attr_getdetachstate,
-	(const pthread_attr_t *attr, int *detachstate));
-int	_EXFUN(pthread_attr_setdetachstate,
-	(pthread_attr_t *attr, int detachstate));
-
-/* Thread Creation, P1003.1c/Draft 10, p. 144 */
-
-int	_EXFUN(pthread_create,
-	(pthread_t *thread, const pthread_attr_t  *attr,
-	void *(*start_routine)( void * ), void *arg));
-
-/* Wait for Thread Termination, P1003.1c/Draft 10, p. 147 */
-
-int	_EXFUN(pthread_join, (pthread_t thread, void **value_ptr));
-
-/* Detaching a Thread, P1003.1c/Draft 10, p. 149 */
-
-int	_EXFUN(pthread_detach, (pthread_t thread));
-
-/* Thread Termination, p1003.1c/Draft 10, p. 150 */
-
-void	_EXFUN(pthread_exit, (void *value_ptr));
-
-/* Get Calling Thread's ID, p1003.1c/Draft 10, p. XXX */
-
-pthread_t	_EXFUN(pthread_self, (void));
-
-/* Compare Thread IDs, p1003.1c/Draft 10, p. 153 */
-
-int	_EXFUN(pthread_equal, (pthread_t t1, pthread_t t2));
-
-/* Dynamic Package Initialization */
-
-/* This is used to statically initialize a pthread_once_t. Example:
-  
-    pthread_once_t once = PTHREAD_ONCE_INIT;
-  
-    NOTE:  This is named inconsistently -- it should be INITIALIZER.  */
- 
-#define PTHREAD_ONCE_INIT  { 1, 0 }  /* is initialized and not run */
- 
-int	_EXFUN(pthread_once,
-	(pthread_once_t *once_control, void (*init_routine)(void)));
-
-/* Thread-Specific Data Key Create, P1003.1c/Draft 10, p. 163 */
-
-int	_EXFUN(pthread_key_create,
-	(pthread_key_t *key, void (*destructor)( void * )));
-
-/* Thread-Specific Data Management, P1003.1c/Draft 10, p. 165 */
-
-int	_EXFUN(pthread_setspecific, (pthread_key_t key, const void *value));
-void *	_EXFUN(pthread_getspecific, (pthread_key_t key));
-
-/* Thread-Specific Data Key Deletion, P1003.1c/Draft 10, p. 167 */
-
-int	_EXFUN(pthread_key_delete, (pthread_key_t key));
-
-/* Execution of a Thread, P1003.1c/Draft 10, p. 181 */
-
-#define PTHREAD_CANCEL_ENABLE  0
-#define PTHREAD_CANCEL_DISABLE 1
-
-#define PTHREAD_CANCEL_DEFERRED 0
-#define PTHREAD_CANCEL_ASYNCHRONOUS 1
-
-#define PTHREAD_CANCELED ((void *) -1)
-
-int	_EXFUN(pthread_cancel, (pthread_t thread));
-
-/* Setting Cancelability State, P1003.1c/Draft 10, p. 183 */
-
-int	_EXFUN(pthread_setcancelstate, (int state, int *oldstate));
-int	_EXFUN(pthread_setcanceltype, (int type, int *oldtype));
-void 	_EXFUN(pthread_testcancel, (void));
-
-/* Establishing Cancellation Handlers, P1003.1c/Draft 10, p. 184 */
-
-void 	_EXFUN(pthread_cleanup_push, (void (*routine)( void * ), void *arg));
-void 	_EXFUN(pthread_cleanup_pop, (int execute));
-
-#if defined(_POSIX_THREAD_CPUTIME)
- 
-/* Accessing a Thread CPU-time Clock, P1003.4b/D8, p. 58 */
- 
-int	_EXFUN(pthread_getcpuclockid,
-	(pthread_t thread_id, clockid_t *clock_id));
- 
-/* CPU-time Clock Thread Creation Attribute, P1003.4b/D8, p. 59 */
-
-int	_EXFUN(pthread_attr_setcputime,
-	(pthread_attr_t *attr, int clock_allowed));
-
-int	_EXFUN(pthread_attr_getcputime,
-	(pthread_attr_t *attr, int *clock_allowed));
-
-#endif /* defined(_POSIX_THREAD_CPUTIME) */
-
-#endif /* defined(_POSIX_THREADS) */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-/* end of include file */
diff --git a/newlib/libc/include/pwd.h b/newlib/libc/include/pwd.h
deleted file mode 100644
index 27b21f877..000000000
--- a/newlib/libc/include/pwd.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*-
- * Copyright (c) 1989 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)pwd.h	5.13 (Berkeley) 5/28/91
- */
-
-#ifndef _PWD_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define	_PWD_H_
-
-#include <sys/types.h>
-
-#ifndef _POSIX_SOURCE
-#define	_PATH_PASSWD		"/etc/passwd"
-
-#define	_PASSWORD_LEN		128	/* max length, not counting NULL */
-#endif
-
-struct passwd {
-	char	*pw_name;		/* user name */
-	char	*pw_passwd;		/* encrypted password */
-	int	pw_uid;			/* user uid */
-	int	pw_gid;			/* user gid */
-	char	*pw_comment;		/* comment */
-	char	*pw_gecos;		/* Honeywell login info */
-	char	*pw_dir;		/* home directory */
-	char	*pw_shell;		/* default shell */
-};
-
-#ifndef __INSIDE_CYGWIN__
-struct passwd	*getpwuid (uid_t);
-struct passwd	*getpwnam (const char *);
-int 		 getpwnam_r (const char *, struct passwd *,
-			char *, size_t , struct passwd **);
-int		 getpwuid_r (uid_t, struct passwd *, char *,
-			size_t, struct passwd **);
-#ifndef _POSIX_SOURCE
-struct passwd	*getpwent (void);
-void		 setpwent (void);
-void		 endpwent (void);
-#endif
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _PWD_H_ */
diff --git a/newlib/libc/include/reent.h b/newlib/libc/include/reent.h
deleted file mode 100644
index 00c2eb4b6..000000000
--- a/newlib/libc/include/reent.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* This header file provides the reentrancy.  */
-
-/* The reentrant system calls here serve two purposes:
-
-   1) Provide reentrant versions of the system calls the ANSI C library
-      requires.
-   2) Provide these system calls in a namespace clean way.
-
-   It is intended that *all* system calls that the ANSI C library needs
-   be declared here.  It documents them all in one place.  All library access
-   to the system is via some form of these functions.
-
-   There are three ways a target may provide the needed syscalls.
-
-   1) Define the reentrant versions of the syscalls directly.
-      (eg: _open_r, _close_r, etc.).  Please keep the namespace clean.
-      When you do this, set "syscall_dir" to "syscalls" and add
-      -DREENTRANT_SYSCALLS_PROVIDED to newlib_cflags in configure.host.
-
-   2) Define namespace clean versions of the system calls by prefixing
-      them with '_' (eg: _open, _close, etc.).  Technically, there won't be
-      true reentrancy at the syscall level, but the library will be namespace
-      clean.
-      When you do this, set "syscall_dir" to "syscalls" in configure.host.
-
-   3) Define or otherwise provide the regular versions of the syscalls
-      (eg: open, close, etc.).  The library won't be reentrant nor namespace
-      clean, but at least it will work.
-      When you do this, add -DMISSING_SYSCALL_NAMES to newlib_cflags in
-      configure.host.
-
-   Stubs of the reentrant versions of the syscalls exist in the libc/reent
-   source directory and are used if REENTRANT_SYSCALLS_PROVIDED isn't defined.
-   They use the native system calls: _open, _close, etc. if they're available
-   (MISSING_SYSCALL_NAMES is *not* defined), otherwise open, close, etc.
-   (MISSING_SYSCALL_NAMES *is* defined).  */
-
-/* WARNING: All identifiers here must begin with an underscore.  This file is
-   included by stdio.h and others and we therefore must only use identifiers
-   in the namespace allotted to us.  */
-
-#ifndef _REENT_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define _REENT_H_
-
-#include <sys/reent.h>
-#include <sys/_types.h>
-#include <machine/types.h>
-
-#define __need_size_t
-#define __need_ptrdiff_t
-#include <stddef.h>
-
-/* FIXME: not namespace clean */
-struct stat;
-struct tms;
-struct timeval;
-struct timezone;
-
-/* Reentrant versions of system calls.  */
-
-extern int _close_r _PARAMS ((struct _reent *, int));
-extern int _execve_r _PARAMS ((struct _reent *, char *, char **, char **));
-extern int _fcntl_r _PARAMS ((struct _reent *, int, int, int));
-extern int _fork_r _PARAMS ((struct _reent *));
-extern int _fstat_r _PARAMS ((struct _reent *, int, struct stat *));
-extern int _getpid_r _PARAMS ((struct _reent *));
-extern int _kill_r _PARAMS ((struct _reent *, int, int));
-extern int _link_r _PARAMS ((struct _reent *, const char *, const char *));
-extern _off_t _lseek_r _PARAMS ((struct _reent *, int, _off_t, int));
-extern int _open_r _PARAMS ((struct _reent *, const char *, int, int));
-extern _ssize_t _read_r _PARAMS ((struct _reent *, int, void *, size_t));
-extern void *_sbrk_r _PARAMS ((struct _reent *, ptrdiff_t));
-extern int _stat_r _PARAMS ((struct _reent *, const char *, struct stat *));
-extern _CLOCK_T_ _times_r _PARAMS ((struct _reent *, struct tms *));
-extern int _unlink_r _PARAMS ((struct _reent *, const char *));
-extern int _wait_r _PARAMS ((struct _reent *, int *));
-extern _ssize_t _write_r _PARAMS ((struct _reent *, int, const void *, size_t));
-
-/* This one is not guaranteed to be available on all targets.  */
-extern int _gettimeofday_r _PARAMS ((struct _reent *, struct timeval *tp, struct timezone *tzp));
-
-#ifdef __LARGE64_FILES
-
-#if defined(__CYGWIN__) && defined(_COMPILING_NEWLIB)
-#define stat64 __stat64
-#endif
-
-struct stat64;
-
-extern _off64_t _lseek64_r _PARAMS ((struct _reent *, int, _off64_t, int));
-extern int _fstat64_r _PARAMS ((struct _reent *, int, struct stat64 *));
-extern int _open64_r _PARAMS ((struct _reent *, const char *, int, int));
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _REENT_H_ */
diff --git a/newlib/libc/include/regdef.h b/newlib/libc/include/regdef.h
deleted file mode 100644
index 8cf144b85..000000000
--- a/newlib/libc/include/regdef.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* regdef.h -- define register names.  */
-
-/* This is a standard include file for MIPS targets.  Other target
-   probably don't define it, and attempts to include this file will
-   fail.  */
-
-#include <machine/regdef.h>
diff --git a/newlib/libc/include/search.h b/newlib/libc/include/search.h
deleted file mode 100644
index c78ce1841..000000000
--- a/newlib/libc/include/search.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*	$NetBSD: search.h,v 1.12 1999/02/22 10:34:28 christos Exp $	*/
-/* $FreeBSD: src/include/search.h,v 1.4 2002/03/23 17:24:53 imp Exp $ */
-
-/*
- * Written by J.T. Conklin <jtc@netbsd.org>
- * Public domain.
- */
-
-#ifndef _SEARCH_H_
-#define _SEARCH_H_
-
-#include <sys/cdefs.h>
-#include <machine/ansi.h>
-#include <sys/types.h>
-
-typedef struct entry {
-	char *key;
-	void *data;
-} ENTRY;
-
-typedef enum {
-	FIND, ENTER
-} ACTION;
-
-typedef enum {
-	preorder,
-	postorder,
-	endorder,
-	leaf
-} VISIT;
-
-#ifdef _SEARCH_PRIVATE
-typedef struct node {
-	char         *key;
-	struct node  *llink, *rlink;
-} node_t;
-#endif
-
-struct hsearch_data
-{
-  struct internal_head *htable;
-  size_t htablesize;
-};
-
-__BEGIN_DECLS
-int	 hcreate(size_t);
-void	 hdestroy(void);
-ENTRY	*hsearch(ENTRY, ACTION);
-int	 hcreate_r(size_t, struct hsearch_data *);
-void	 hdestroy_r(struct hsearch_data *);
-int	hsearch_r(ENTRY, ACTION, ENTRY **, struct hsearch_data *);
-void	*tdelete(const void *, void **, int (*)(const void *, const void *));
-void	tdestroy (void *, void (*)(void *));
-void	*tfind(const void *, void **, int (*)(const void *, const void *));
-void	*tsearch(const void *, void **, int (*)(const void *, const void *));
-void      twalk(const void *, void (*)(const void *, VISIT, int));
-__END_DECLS
-
-#endif /* !_SEARCH_H_ */
diff --git a/newlib/libc/include/setjmp.h b/newlib/libc/include/setjmp.h
deleted file mode 100644
index c958d9042..000000000
--- a/newlib/libc/include/setjmp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
-	setjmp.h
-	stubs for future use.
-*/
-
-#ifndef _SETJMP_H_
-#define _SETJMP_H_
-
-#include "_ansi.h"
-#include <machine/setjmp.h>
-
-_BEGIN_STD_C
-
-void	_EXFUN(longjmp,(jmp_buf __jmpb, int __retval));
-int	_EXFUN(setjmp,(jmp_buf __jmpb));
-
-_END_STD_C
-
-#endif /* _SETJMP_H_ */
-
diff --git a/newlib/libc/include/signal.h b/newlib/libc/include/signal.h
deleted file mode 100644
index 1b3b57b49..000000000
--- a/newlib/libc/include/signal.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _SIGNAL_H_
-#define _SIGNAL_H_
-
-#include "_ansi.h"
-#include <sys/signal.h>
-
-_BEGIN_STD_C
-
-typedef int	sig_atomic_t;		/* Atomic entity type (ANSI) */
-
-#define SIG_DFL ((_sig_func_ptr)0)	/* Default action */
-#define SIG_IGN ((_sig_func_ptr)1)	/* Ignore action */
-#define SIG_ERR ((_sig_func_ptr)-1)	/* Error return */
-
-struct _reent;
-
-_sig_func_ptr _EXFUN(_signal_r, (struct _reent *, int, _sig_func_ptr));
-int	_EXFUN(_raise_r, (struct _reent *, int));
-
-#ifndef _REENT_ONLY
-_sig_func_ptr _EXFUN(signal, (int, _sig_func_ptr));
-int	_EXFUN(raise, (int));
-#endif
-
-_END_STD_C
-
-#endif /* _SIGNAL_H_ */
diff --git a/newlib/libc/include/stdio.h b/newlib/libc/include/stdio.h
deleted file mode 100644
index f1ee3ee4f..000000000
--- a/newlib/libc/include/stdio.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	@(#)stdio.h	5.3 (Berkeley) 3/15/86
- */
-
-/*
- * NB: to fit things in six character monocase externals, the
- * stdio code uses the prefix `__s' for stdio objects, typically
- * followed by a three-character attempt at a mnemonic.
- */
-
-#ifndef _STDIO_H_
-#define	_STDIO_H_
-
-#include "_ansi.h"
-
-#define	_FSTDIO			/* ``function stdio'' */
-
-#define __need_size_t
-#include <stddef.h>
-
-#define __need___va_list
-#include <stdarg.h>
-
-/*
- * <sys/reent.h> defines __FILE, _fpos_t.
- * They must be defined there because struct _reent needs them (and we don't
- * want reent.h to include this file.
- */
-
-#include <sys/reent.h>
-#include <sys/types.h>
-
-_BEGIN_STD_C
-
-typedef __FILE FILE;
-
-#ifdef __CYGWIN__
-#ifdef __CYGWIN_USE_BIG_TYPES__
-typedef _fpos64_t fpos_t;
-#else
-typedef _fpos_t fpos_t;
-#endif
-#else
-typedef _fpos_t fpos_t;
-#ifdef __LARGE64_FILES
-typedef _fpos64_t fpos64_t;
-#endif
-#endif /* !__CYGWIN__ */
-
-#include <sys/stdio.h>
-
-#define	__SLBF	0x0001		/* line buffered */
-#define	__SNBF	0x0002		/* unbuffered */
-#define	__SRD	0x0004		/* OK to read */
-#define	__SWR	0x0008		/* OK to write */
-	/* RD and WR are never simultaneously asserted */
-#define	__SRW	0x0010		/* open for reading & writing */
-#define	__SEOF	0x0020		/* found EOF */
-#define	__SERR	0x0040		/* found error */
-#define	__SMBF	0x0080		/* _buf is from malloc */
-#define	__SAPP	0x0100		/* fdopen()ed in append mode - so must  write to end */
-#define	__SSTR	0x0200		/* this is an sprintf/snprintf string */
-#define	__SOPT	0x0400		/* do fseek() optimisation */
-#define	__SNPT	0x0800		/* do not do fseek() optimisation */
-#define	__SOFF	0x1000		/* set iff _offset is in fact correct */
-#define	__SMOD	0x2000		/* true => fgetline modified _p text */
-#if defined(__CYGWIN__)
-#  define __SCLE  0x4000        /* convert line endings CR/LF <-> NL */
-#endif
-#define	__SL64	0x8000		/* is 64-bit offset large file */
-
-/*
- * The following three definitions are for ANSI C, which took them
- * from System V, which stupidly took internal interface macros and
- * made them official arguments to setvbuf(), without renaming them.
- * Hence, these ugly _IOxxx names are *supposed* to appear in user code.
- *
- * Although these happen to match their counterparts above, the
- * implementation does not rely on that (so these could be renumbered).
- */
-#define	_IOFBF	0		/* setvbuf should set fully buffered */
-#define	_IOLBF	1		/* setvbuf should set line buffered */
-#define	_IONBF	2		/* setvbuf should set unbuffered */
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-#define	EOF	(-1)
-
-#ifdef __BUFSIZ__
-#define	BUFSIZ		__BUFSIZ__
-#else
-#define	BUFSIZ		1024
-#endif
-
-#ifdef __FOPEN_MAX__
-#define FOPEN_MAX	__FOPEN_MAX__
-#else
-#define	FOPEN_MAX	20
-#endif
-
-#ifdef __FILENAME_MAX__
-#define FILENAME_MAX    __FILENAME_MAX__
-#else
-#define	FILENAME_MAX	1024
-#endif
-
-#ifdef __L_tmpnam__
-#define L_tmpnam	__L_tmpnam__
-#else
-#define	L_tmpnam	FILENAME_MAX
-#endif
-
-#ifndef __STRICT_ANSI__
-#define P_tmpdir        "/tmp"
-#endif
-
-#ifndef SEEK_SET
-#define	SEEK_SET	0	/* set file offset to offset */
-#endif
-#ifndef SEEK_CUR
-#define	SEEK_CUR	1	/* set file offset to current plus offset */
-#endif
-#ifndef SEEK_END
-#define	SEEK_END	2	/* set file offset to EOF plus offset */
-#endif
-
-#define	TMP_MAX		26
-
-#ifndef _REENT_ONLY
-#define	stdin	(_REENT->_stdin)
-#define	stdout	(_REENT->_stdout)
-#define	stderr	(_REENT->_stderr)
-#else /* _REENT_ONLY */
-#define	stdin	(_impure_ptr->_stdin)
-#define	stdout	(_impure_ptr->_stdout)
-#define	stderr	(_impure_ptr->_stderr)
-#endif /* _REENT_ONLY */
-
-#define _stdin_r(x)	((x)->_stdin)
-#define _stdout_r(x)	((x)->_stdout)
-#define _stderr_r(x)	((x)->_stderr)
-
-/*
- * Functions defined in ANSI C standard.
- */
-
-#ifdef __GNUC__
-#define __VALIST __gnuc_va_list
-#else
-#define __VALIST char*
-#endif
-
-FILE *	_EXFUN(tmpfile, (void));
-char *	_EXFUN(tmpnam, (char *));
-int	_EXFUN(fclose, (FILE *));
-int	_EXFUN(fflush, (FILE *));
-FILE *	_EXFUN(freopen, (const char *, const char *, FILE *));
-void	_EXFUN(setbuf, (FILE *, char *));
-int	_EXFUN(setvbuf, (FILE *, char *, int, size_t));
-int	_EXFUN(fprintf, (FILE *, const char *, ...));
-int	_EXFUN(fscanf, (FILE *, const char *, ...));
-int	_EXFUN(printf, (const char *, ...));
-int	_EXFUN(scanf, (const char *, ...));
-int	_EXFUN(sscanf, (const char *, const char *, ...));
-int	_EXFUN(vfprintf, (FILE *, const char *, __VALIST));
-int	_EXFUN(vprintf, (const char *, __VALIST));
-int	_EXFUN(vsprintf, (char *, const char *, __VALIST));
-int	_EXFUN(fgetc, (FILE *));
-char *  _EXFUN(fgets, (char *, int, FILE *));
-int	_EXFUN(fputc, (int, FILE *));
-int	_EXFUN(fputs, (const char *, FILE *));
-int	_EXFUN(getc, (FILE *));
-int	_EXFUN(getchar, (void));
-char *  _EXFUN(gets, (char *));
-int	_EXFUN(putc, (int, FILE *));
-int	_EXFUN(putchar, (int));
-int	_EXFUN(puts, (const char *));
-int	_EXFUN(ungetc, (int, FILE *));
-size_t	_EXFUN(fread, (_PTR, size_t _size, size_t _n, FILE *));
-size_t	_EXFUN(fwrite, (const _PTR , size_t _size, size_t _n, FILE *));
-#ifdef _COMPILING_NEWLIB
-int	_EXFUN(fgetpos, (FILE *, _fpos_t *));
-#else
-int	_EXFUN(fgetpos, (FILE *, fpos_t *));
-#endif
-int	_EXFUN(fseek, (FILE *, long, int));
-#ifdef _COMPILING_NEWLIB
-int	_EXFUN(fsetpos, (FILE *, const _fpos_t *));
-#else
-int	_EXFUN(fsetpos, (FILE *, const fpos_t *));
-#endif
-long	_EXFUN(ftell, ( FILE *));
-void	_EXFUN(rewind, (FILE *));
-void	_EXFUN(clearerr, (FILE *));
-int	_EXFUN(feof, (FILE *));
-int	_EXFUN(ferror, (FILE *));
-void    _EXFUN(perror, (const char *));
-#ifndef _REENT_ONLY
-FILE *	_EXFUN(fopen, (const char *_name, const char *_type));
-int	_EXFUN(sprintf, (char *, const char *, ...));
-int	_EXFUN(remove, (const char *));
-int	_EXFUN(rename, (const char *, const char *));
-#endif
-#ifndef __STRICT_ANSI__
-int	_EXFUN(asprintf, (char **, const char *, ...));
-#ifdef _COMPILING_NEWLIB
-int	_EXFUN(fseeko, (FILE *, _off_t, int));
-_off_t	_EXFUN(ftello, ( FILE *));
-#else
-int	_EXFUN(fseeko, (FILE *, off_t, int));
-off_t	_EXFUN(ftello, ( FILE *));
-#endif
-int	_EXFUN(vfiprintf, (FILE *, const char *, __VALIST));
-int	_EXFUN(iprintf, (const char *, ...));
-int	_EXFUN(fiprintf, (FILE *, const char *, ...));
-int	_EXFUN(siprintf, (char *, const char *, ...));
-char *	_EXFUN(tempnam, (const char *, const char *));
-int	_EXFUN(vasprintf, (char **, const char *, __VALIST));
-int	_EXFUN(vsnprintf, (char *, size_t, const char *, __VALIST));
-int	_EXFUN(vfscanf, (FILE *, const char *, __VALIST));
-int	_EXFUN(vscanf, (const char *, __VALIST));
-int	_EXFUN(vsscanf, (const char *, const char *, __VALIST));
-#ifndef _REENT_ONLY
-int	_EXFUN(fcloseall, (_VOID));
-int	_EXFUN(snprintf, (char *, size_t, const char *, ...));
-#endif
-#endif
-
-/*
- * Routines in POSIX 1003.1.
- */
-
-#ifndef __STRICT_ANSI__
-#ifndef _REENT_ONLY
-FILE *	_EXFUN(fdopen, (int, const char *));
-#endif
-int	_EXFUN(fileno, (FILE *));
-int	_EXFUN(getw, (FILE *));
-int	_EXFUN(pclose, (FILE *));
-FILE *  _EXFUN(popen, (const char *, const char *));
-int	_EXFUN(putw, (int, FILE *));
-void    _EXFUN(setbuffer, (FILE *, char *, int));
-int	_EXFUN(setlinebuf, (FILE *));
-int	_EXFUN(getc_unlocked, (FILE *));
-int	_EXFUN(getchar_unlocked, (void));
-void	_EXFUN(flockfile, (FILE *));
-int	_EXFUN(ftrylockfile, (FILE *));
-void	_EXFUN(funlockfile, (FILE *));
-int	_EXFUN(putc_unlocked, (int, FILE *));
-int	_EXFUN(putchar_unlocked, (int));
-#endif
-
-/*
- * Recursive versions of the above.
- */
-
-int	_EXFUN(_asprintf_r, (struct _reent *, char **, const char *, ...));
-int	_EXFUN(_fcloseall_r, (struct _reent *));
-FILE *	_EXFUN(_fdopen_r, (struct _reent *, int, const char *));
-FILE *	_EXFUN(_fopen_r, (struct _reent *, const char *, const char *));
-int	_EXFUN(_fscanf_r, (struct _reent *, FILE *, const char *, ...));
-int	_EXFUN(_getchar_r, (struct _reent *));
-char *	_EXFUN(_gets_r, (struct _reent *, char *));
-int	_EXFUN(_iprintf_r, (struct _reent *, const char *, ...));
-int	_EXFUN(_mkstemp_r, (struct _reent *, char *));
-char *	_EXFUN(_mktemp_r, (struct _reent *, char *));
-void	_EXFUN(_perror_r, (struct _reent *, const char *));
-int	_EXFUN(_printf_r, (struct _reent *, const char *, ...));
-int	_EXFUN(_putchar_r, (struct _reent *, int));
-int	_EXFUN(_puts_r, (struct _reent *, const char *));
-int	_EXFUN(_remove_r, (struct _reent *, const char *));
-int	_EXFUN(_rename_r, (struct _reent *,
-			   const char *_old, const char *_new));
-int	_EXFUN(_scanf_r, (struct _reent *, const char *, ...));
-int	_EXFUN(_sprintf_r, (struct _reent *, char *, const char *, ...));
-int	_EXFUN(_snprintf_r, (struct _reent *, char *, size_t, const char *, ...));
-int	_EXFUN(_sscanf_r, (struct _reent *, const char *, const char *, ...));
-char *	_EXFUN(_tempnam_r, (struct _reent *, const char *, const char *));
-FILE *	_EXFUN(_tmpfile_r, (struct _reent *));
-char *	_EXFUN(_tmpnam_r, (struct _reent *, char *));
-int	_EXFUN(_vasprintf_r, (struct _reent *, char **, const char *, __VALIST));
-int	_EXFUN(_vfprintf_r, (struct _reent *, FILE *, const char *, __VALIST));
-int	_EXFUN(_vprintf_r, (struct _reent *, const char *, __VALIST));
-int	_EXFUN(_vsprintf_r, (struct _reent *, char *, const char *, __VALIST));
-int	_EXFUN(_vsnprintf_r, (struct _reent *, char *, size_t, const char *, __VALIST));
-int	_EXFUN(_vfscanf_r, (struct _reent *, FILE *, const char *, __VALIST));
-int	_EXFUN(_vscanf_r, (struct _reent *, const char *, __VALIST));
-int	_EXFUN(_vsscanf_r, (struct _reent *, const char *, const char *, __VALIST));
-
-ssize_t _EXFUN(__getdelim, (char **, size_t *, int, FILE *));
-ssize_t _EXFUN(__getline, (char **, size_t *, FILE *));
-
-#ifdef __LARGE64_FILES
-#if !defined(__CYGWIN__) || defined(_COMPILING_NEWLIB)
-FILE *	_EXFUN(fdopen64, (int, const char *));
-FILE *  _EXFUN(fopen64, (const char *, const char *));
-_off64_t _EXFUN(ftello64, (FILE *));
-_off64_t _EXFUN(fseeko64, (FILE *, _off64_t, int));
-int     _EXFUN(fgetpos64, (FILE *, _fpos64_t *));
-int     _EXFUN(fsetpos64, (FILE *, const _fpos64_t *));
-FILE *  _EXFUN(tmpfile64, (void));
-
-FILE *	_EXFUN(_fdopen64_r, (struct _reent *, int, const char *));
-FILE *  _EXFUN(_fopen64_r, (struct _reent *,const char *, const char *));
-_off64_t _EXFUN(_ftello64_r, (struct _reent *, FILE *));
-_off64_t _EXFUN(_fseeko64_r, (struct _reent *, FILE *, _off64_t, int));
-int     _EXFUN(_fgetpos64_r, (struct _reent *, FILE *, _fpos64_t *));
-int     _EXFUN(_fsetpos64_r, (struct _reent *, FILE *, const _fpos64_t *));
-FILE *  _EXFUN(_tmpfile64_r, (struct _reent *));
-#endif /* !__CYGWIN__ */
-#endif /* __LARGE64_FILES */
- 
-/*
- * Routines internal to the implementation.
- */
-
-int	_EXFUN(__srget, (FILE *));
-int	_EXFUN(__swbuf, (int, FILE *));
-
-/*
- * Stdio function-access interface.
- */
-
-#ifndef __STRICT_ANSI__
-FILE	*_EXFUN(funopen,(const _PTR _cookie,
-		int (*readfn)(_PTR _cookie, char *_buf, int _n),
-		int (*writefn)(_PTR _cookie, const char *_buf, int _n),
-		fpos_t (*seekfn)(_PTR _cookie, fpos_t _off, int _whence),
-		int (*closefn)(_PTR _cookie)));
-
-#define	fropen(cookie, fn) funopen(cookie, fn, (int (*)())0, (fpos_t (*)())0, (int (*)())0)
-#define	fwopen(cookie, fn) funopen(cookie, (int (*)())0, fn, (fpos_t (*)())0, (int (*)())0)
-#endif
-
-/*
- * The __sfoo macros are here so that we can 
- * define function versions in the C library.
- */
-#define       __sgetc_raw(p) (--(p)->_r < 0 ? __srget(p) : (int)(*(p)->_p++))
-
-#ifdef __SCLE
-static __inline__ int __sgetc(FILE *__p)
-  {
-    int __c = __sgetc_raw(__p);
-    if ((__p->_flags & __SCLE) && (__c == '\r'))
-      {
-      int __c2 = __sgetc_raw(__p);
-      if (__c2 == '\n')
-        __c = __c2;
-      else
-        ungetc(__c2, __p);
-      }
-    return __c;
-  }
-#else
-#define __sgetc(p) __sgetc_raw(p)
-#endif
-
-#ifdef _never /* __GNUC__ */
-/* If this inline is actually used, then systems using coff debugging
-   info get hopelessly confused.  21sept93 rich@cygnus.com.  */
-static __inline int __sputc(int _c, FILE *_p) {
-	if (--_p->_w >= 0 || (_p->_w >= _p->_lbfsize && (char)_c != '\n'))
-		return (*_p->_p++ = _c);
-	else
-		return (__swbuf(_c, _p));
-}
-#else
-/*
- * This has been tuned to generate reasonable code on the vax using pcc
- */
-#define       __sputc_raw(c, p) \
-	(--(p)->_w < 0 ? \
-		(p)->_w >= (p)->_lbfsize ? \
-			(*(p)->_p = (c)), *(p)->_p != '\n' ? \
-				(int)*(p)->_p++ : \
-				__swbuf('\n', p) : \
-			__swbuf((int)(c), p) : \
-		(*(p)->_p = (c), (int)*(p)->_p++))
-#ifdef __SCLE
-#define __sputc(c, p) \
-        ((((p)->_flags & __SCLE) && ((c) == '\n')) \
-          ? __sputc_raw('\r', (p)) : 0 , \
-        __sputc_raw((c), (p)))
-#else
-#define __sputc(c, p) __sputc_raw(c, p)
-#endif
-#endif
-
-#define	__sfeof(p)	(((p)->_flags & __SEOF) != 0)
-#define	__sferror(p)	(((p)->_flags & __SERR) != 0)
-#define	__sclearerr(p)	((void)((p)->_flags &= ~(__SERR|__SEOF)))
-#define	__sfileno(p)	((p)->_file)
-
-#define	feof(p)		__sfeof(p)
-#define	ferror(p)	__sferror(p)
-#define	clearerr(p)	__sclearerr(p)
-
-#if 0 /*ndef __STRICT_ANSI__ - FIXME: must initialize stdio first, use fn */
-#define	fileno(p)	__sfileno(p)
-#endif
-
-#ifndef __CYGWIN__
-#ifndef lint
-#define	getc(fp)	__sgetc(fp)
-#define putc(x, fp)	__sputc(x, fp)
-#endif /* lint */
-#endif /* __CYGWIN__ */
-
-#define	getchar()	getc(stdin)
-#define	putchar(x)	putc(x, stdout)
-
-#ifndef __STRICT_ANSI__
-/* fast always-buffered version, true iff error */
-#define	fast_putc(x,p) (--(p)->_w < 0 ? \
-	__swbuf((int)(x), p) == EOF : (*(p)->_p = (x), (p)->_p++, 0))
-
-#define	L_cuserid	9		/* posix says it goes in stdio.h :( */
-#ifdef __CYGWIN__
-#define L_ctermid       16
-#endif
-#endif
-
-_END_STD_C
-
-#endif /* _STDIO_H_ */
diff --git a/newlib/libc/include/stdlib.h b/newlib/libc/include/stdlib.h
deleted file mode 100644
index 9354b1ea2..000000000
--- a/newlib/libc/include/stdlib.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * stdlib.h
- *
- * Definitions for common types, variables, and functions.
- */
-
-#ifndef _STDLIB_H_
-#define _STDLIB_H_
-
-#include "_ansi.h"
-
-#define __need_size_t
-#define __need_wchar_t
-#include <stddef.h>
-
-#include <sys/reent.h>
-#include <machine/stdlib.h>
-#ifndef __STRICT_ANSI__
-#include <alloca.h>
-#endif
-
-_BEGIN_STD_C
-
-typedef struct 
-{
-  int quot; /* quotient */
-  int rem; /* remainder */
-} div_t;
-
-typedef struct 
-{
-  long quot; /* quotient */
-  long rem; /* remainder */
-} ldiv_t;
-
-#ifndef __STRICT_ANSI__
-typedef struct
-{
-  long long int quot; /* quotient */
-  long long int rem; /* remainder */
-} lldiv_t;
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-#define EXIT_FAILURE 1
-#define EXIT_SUCCESS 0
-
-#define RAND_MAX __RAND_MAX
-
-extern __IMPORT int __mb_cur_max;
-
-#define MB_CUR_MAX __mb_cur_max
-
-_VOID	_EXFUN(abort,(_VOID) _ATTRIBUTE ((noreturn)));
-int	_EXFUN(abs,(int));
-int	_EXFUN(atexit,(_VOID (*__func)(_VOID)));
-double	_EXFUN(atof,(const char *__nptr));
-#ifndef __STRICT_ANSI__
-float	_EXFUN(atoff,(const char *__nptr));
-#endif
-int	_EXFUN(atoi,(const char *__nptr));
-int	_EXFUN(_atoi_r,(struct _reent *, const char *__nptr));
-long	_EXFUN(atol,(const char *__nptr));
-long	_EXFUN(_atol_r,(struct _reent *, const char *__nptr));
-_PTR	_EXFUN(bsearch,(const _PTR __key,
-		       const _PTR __base,
-		       size_t __nmemb,
-		       size_t __size,
-		       int _EXPARM(_compar,(const _PTR, const _PTR))));
-_PTR	_EXFUN(calloc,(size_t __nmemb, size_t __size));
-div_t	_EXFUN(div,(int __numer, int __denom));
-_VOID	_EXFUN(exit,(int __status) _ATTRIBUTE ((noreturn)));
-_VOID	_EXFUN(free,(_PTR));
-char *  _EXFUN(getenv,(const char *__string));
-char *	_EXFUN(_getenv_r,(struct _reent *, const char *__string));
-#ifdef __CYGWIN__
-const char *_EXFUN(getprogname,(void));
-#endif
-char *	_EXFUN(_findenv,(_CONST char *, int *));
-char *	_EXFUN(_findenv_r,(struct _reent *, _CONST char *, int *));
-long	_EXFUN(labs,(long));
-ldiv_t	_EXFUN(ldiv,(long __numer, long __denom));
-_PTR	_EXFUN(malloc,(size_t __size));
-int	_EXFUN(mblen,(const char *, size_t));
-int	_EXFUN(_mblen_r,(struct _reent *, const char *, size_t, _mbstate_t *));
-int	_EXFUN(mbtowc,(wchar_t *, const char *, size_t));
-int	_EXFUN(_mbtowc_r,(struct _reent *, wchar_t *, const char *, size_t, _mbstate_t *));
-int	_EXFUN(wctomb,(char *, wchar_t));
-int	_EXFUN(_wctomb_r,(struct _reent *, char *, wchar_t, _mbstate_t *));
-size_t	_EXFUN(mbstowcs,(wchar_t *, const char *, size_t));
-size_t	_EXFUN(_mbstowcs_r,(struct _reent *, wchar_t *, const char *, size_t, _mbstate_t *));
-size_t	_EXFUN(wcstombs,(char *, const wchar_t *, size_t));
-size_t	_EXFUN(_wcstombs_r,(struct _reent *, char *, const wchar_t *, size_t, _mbstate_t *));
-#ifndef __STRICT_ANSI__
-#ifndef _REENT_ONLY
-int     _EXFUN(mkstemp,(char *));
-char *  _EXFUN(mktemp,(char *));
-#endif
-#endif
-_VOID	_EXFUN(qsort,(_PTR __base, size_t __nmemb, size_t __size, int(*_compar)(const _PTR, const _PTR)));
-int	_EXFUN(rand,(_VOID));
-_PTR	_EXFUN(realloc,(_PTR __r, size_t __size));
-#ifdef __CYGWIN__
-void	_EXFUN(setprogname,(const char *));
-#endif
-_VOID	_EXFUN(srand,(unsigned __seed));
-double	_EXFUN(strtod,(const char *__n, char **__end_PTR));
-double	_EXFUN(_strtod_r,(struct _reent *,const char *__n, char **__end_PTR));
-float	_EXFUN(strtof,(const char *__n, char **__end_PTR));
-#ifndef __STRICT_ANSI__
-/* the following strtodf interface is deprecated...use strtof instead */
-# ifndef strtodf 
-#  define strtodf strtof
-# endif
-#endif
-long	_EXFUN(strtol,(const char *__n, char **__end_PTR, int __base));
-long	_EXFUN(_strtol_r,(struct _reent *,const char *__n, char **__end_PTR, int __base));
-unsigned long _EXFUN(strtoul,(const char *__n, char **__end_PTR, int __base));
-unsigned long _EXFUN(_strtoul_r,(struct _reent *,const char *__n, char **__end_PTR, int __base));
-
-int	_EXFUN(system,(const char *__string));
-
-#ifndef __STRICT_ANSI__
-long    _EXFUN(a64l,(const char *__input));
-char *  _EXFUN(l64a,(long __input));
-char *  _EXFUN(_l64a_r,(struct _reent *,long __input));
-int	_EXFUN(on_exit,(_VOID (*__func)(int, _PTR),_PTR __arg));
-_VOID	_EXFUN(_Exit,(int __status) _ATTRIBUTE ((noreturn)));
-int	_EXFUN(putenv,(const char *__string));
-int	_EXFUN(_putenv_r,(struct _reent *, const char *__string));
-int	_EXFUN(setenv,(const char *__string, const char *__value, int __overwrite));
-int	_EXFUN(_setenv_r,(struct _reent *, const char *__string, const char *__value, int __overwrite));
-
-char *	_EXFUN(gcvt,(double,int,char *));
-char *	_EXFUN(gcvtf,(float,int,char *));
-char *	_EXFUN(fcvt,(double,int,int *,int *));
-char *	_EXFUN(fcvtf,(float,int,int *,int *));
-char *	_EXFUN(ecvt,(double,int,int *,int *));
-char *	_EXFUN(ecvtbuf,(double, int, int*, int*, char *));
-char *	_EXFUN(fcvtbuf,(double, int, int*, int*, char *));
-char *	_EXFUN(ecvtf,(float,int,int *,int *));
-char *	_EXFUN(dtoa,(double, int, int, int *, int*, char**));
-int	_EXFUN(rand_r,(unsigned *__seed));
-
-double _EXFUN(drand48,(_VOID));
-double _EXFUN(_drand48_r,(struct _reent *));
-double _EXFUN(erand48,(unsigned short [3]));
-double _EXFUN(_erand48_r,(struct _reent *, unsigned short [3]));
-long   _EXFUN(jrand48,(unsigned short [3]));
-long   _EXFUN(_jrand48_r,(struct _reent *, unsigned short [3]));
-_VOID  _EXFUN(lcong48,(unsigned short [7]));
-_VOID  _EXFUN(_lcong48_r,(struct _reent *, unsigned short [7]));
-long   _EXFUN(lrand48,(_VOID));
-long   _EXFUN(_lrand48_r,(struct _reent *));
-long   _EXFUN(mrand48,(_VOID));
-long   _EXFUN(_mrand48_r,(struct _reent *));
-long   _EXFUN(nrand48,(unsigned short [3]));
-long   _EXFUN(_nrand48_r,(struct _reent *, unsigned short [3]));
-unsigned short *
-       _EXFUN(seed48,(unsigned short [3]));
-unsigned short *
-       _EXFUN(_seed48_r,(struct _reent *, unsigned short [3]));
-_VOID  _EXFUN(srand48,(long));
-_VOID  _EXFUN(_srand48_r,(struct _reent *, long));
-long long _EXFUN(atoll,(const char *__nptr));
-long long _EXFUN(_atoll_r,(struct _reent *, const char *__nptr));
-long long _EXFUN(llabs,(long long));
-lldiv_t	_EXFUN(lldiv,(long long __numer, long long __denom));
-long long _EXFUN(strtoll,(const char *__n, char **__end_PTR, int __base));
-long long _EXFUN(_strtoll_r,(struct _reent *, const char *__n, char **__end_PTR, int __base));
-unsigned long long _EXFUN(strtoull,(const char *__n, char **__end_PTR, int __base));
-unsigned long long _EXFUN(_strtoull_r,(struct _reent *, const char *__n, char **__end_PTR, int __base));
-
-#ifndef __CYGWIN__
-_VOID	_EXFUN(cfree,(_PTR));
-#else
-char *	_EXFUN(realpath,(const char *, char *));
-void	_EXFUN(unsetenv,(const char *__string));
-void	_EXFUN(_unsetenv_r,(struct _reent *, const char *__string));
-int	_EXFUN(random,(_VOID));
-long	_EXFUN(srandom,(unsigned __seed));
-char *  _EXFUN(ptsname, (int));
-int     _EXFUN(grantpt, (int));
-int     _EXFUN(unlockpt,(int));
-#endif
-
-#endif /* ! __STRICT_ANSI__ */
-
-char *	_EXFUN(_dtoa_r,(struct _reent *, double, int, int, int *, int*, char**));
-#ifndef __CYGWIN__
-_PTR	_EXFUN(_malloc_r,(struct _reent *, size_t));
-_PTR	_EXFUN(_calloc_r,(struct _reent *, size_t, size_t));
-_VOID	_EXFUN(_free_r,(struct _reent *, _PTR));
-_PTR	_EXFUN(_realloc_r,(struct _reent *, _PTR, size_t));
-_VOID	_EXFUN(_mstats_r,(struct _reent *, char *));
-#endif
-int	_EXFUN(_system_r,(struct _reent *, const char *));
-
-_VOID	_EXFUN(__eprintf,(const char *, const char *, unsigned int, const char *));
-
-#ifdef __CYGWIN__
-#undef _malloc_r
-#define _malloc_r(r, s) malloc (s)
-#undef _free_r
-#define _free_r(r, p) free (p)
-#undef _realloc_r
-#define _realloc_r(r, p, s) realloc (p, s)
-#undef _calloc_r
-#define _calloc_r(r, s1, s2) calloc (s1, s2);
-#undef _memalign_r
-#define _memalign_r(r, s1, s2) memalign (s1, s2);
-#undef _mallinfo_r
-#define _mallinfo_r(r) mallinfo ()
-#undef _malloc_stats_r
-#define _malloc_stats_r(r) malloc_stats ()
-#undef _mallopt_r
-#define _mallopt_r(i1, i2) mallopt (i1, i2)
-#undef _malloc_usable_size_r
-#define _malloc_usable_size_r(r, p) malloc_usable_size (p)
-#undef _valloc_r
-#define _valloc_r(r, s) valloc (s)
-#undef _pvalloc_r
-#define _pvalloc_r(r, s) pvalloc (s)
-#undef _malloc_trim_r
-#define _malloc_trim_r(r, s) malloc_trim (s)
-#undef _mstats_r
-#define _mstats_r(r, p) mstats (p)
-#endif
-
-_END_STD_C
-
-#endif /* _STDLIB_H_ */
diff --git a/newlib/libc/include/string.h b/newlib/libc/include/string.h
deleted file mode 100644
index bbc66d469..000000000
--- a/newlib/libc/include/string.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * string.h
- *
- * Definitions for memory and string functions.
- */
-
-#ifndef _STRING_H_
-#define	_STRING_H_
-
-#include "_ansi.h"
-#include <sys/reent.h>
-
-#define __need_size_t
-#include <stddef.h>
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-_BEGIN_STD_C
-
-_PTR 	 _EXFUN(memchr,(const _PTR, int, size_t));
-int 	 _EXFUN(memcmp,(const _PTR, const _PTR, size_t));
-_PTR 	 _EXFUN(memcpy,(_PTR, const _PTR, size_t));
-_PTR	 _EXFUN(memmove,(_PTR, const _PTR, size_t));
-_PTR	 _EXFUN(memset,(_PTR, int, size_t));
-char 	*_EXFUN(strcat,(char *, const char *));
-char 	*_EXFUN(strchr,(const char *, int));
-int	 _EXFUN(strcmp,(const char *, const char *));
-int	 _EXFUN(strcoll,(const char *, const char *));
-char 	*_EXFUN(strcpy,(char *, const char *));
-size_t	 _EXFUN(strcspn,(const char *, const char *));
-char 	*_EXFUN(strerror,(int));
-size_t	 _EXFUN(strlen,(const char *));
-char 	*_EXFUN(strncat,(char *, const char *, size_t));
-int	 _EXFUN(strncmp,(const char *, const char *, size_t));
-char 	*_EXFUN(strncpy,(char *, const char *, size_t));
-char 	*_EXFUN(strpbrk,(const char *, const char *));
-char 	*_EXFUN(strrchr,(const char *, int));
-size_t	 _EXFUN(strspn,(const char *, const char *));
-char 	*_EXFUN(strstr,(const char *, const char *));
-
-#ifndef _REENT_ONLY
-char 	*_EXFUN(strtok,(char *, const char *));
-#endif
-
-size_t	 _EXFUN(strxfrm,(char *, const char *, size_t));
-
-#ifndef __STRICT_ANSI__
-char 	*_EXFUN(strtok_r,(char *, const char *, char **));
-
-int	 _EXFUN(bcmp,(const void *, const void *, size_t));
-void	 _EXFUN(bcopy,(const void *, void *, size_t));
-void	 _EXFUN(bzero,(void *, size_t));
-int	 _EXFUN(ffs,(int));
-char 	*_EXFUN(index,(const char *, int));
-_PTR	 _EXFUN(memccpy,(_PTR, const _PTR, int, size_t));
-_PTR	 _EXFUN(mempcpy,(_PTR, const _PTR, size_t));
-char 	*_EXFUN(rindex,(const char *, int));
-int	 _EXFUN(strcasecmp,(const char *, const char *));
-char 	*_EXFUN(strdup,(const char *));
-char 	*_EXFUN(_strdup_r,(struct _reent *, const char *));
-char 	*_EXFUN(strndup,(const char *, size_t));
-char 	*_EXFUN(_strndup_r,(struct _reent *, const char *, size_t));
-char 	*_EXFUN(strerror_r,(int, char *, size_t));
-size_t	 _EXFUN(strlcat,(char *, const char *, size_t));
-size_t	 _EXFUN(strlcpy,(char *, const char *, size_t));
-int	 _EXFUN(strncasecmp,(const char *, const char *, size_t));
-size_t	 _EXFUN(strnlen,(const char *, size_t));
-char 	*_EXFUN(strsep,(char **, const char *));
-char	*_EXFUN(strlwr,(char *));
-char	*_EXFUN(strupr,(char *));
-#ifdef __CYGWIN__
-#ifndef DEFS_H	/* Kludge to work around problem compiling in gdb */
-const char  *_EXFUN(strsignal, (int __signo));
-#endif
-int     _EXFUN(strtosigno, (const char *__name));
-#elif defined(__linux__)
-char	*_EXFUN(strsignal, (int __signo));
-#endif
-
-/* These function names are used on Windows and perhaps other systems.  */
-#ifndef strcmpi
-#define strcmpi strcasecmp
-#endif
-#ifndef stricmp
-#define stricmp strcasecmp
-#endif
-#ifndef strncmpi
-#define strncmpi strncasecmp
-#endif
-#ifndef strnicmp
-#define strnicmp strncasecmp
-#endif
-
-#endif /* ! __STRICT_ANSI__ */
-
-_END_STD_C
-
-#endif /* _STRING_H_ */
diff --git a/newlib/libc/include/sys/_types.h b/newlib/libc/include/sys/_types.h
deleted file mode 100644
index 3d66f5a01..000000000
--- a/newlib/libc/include/sys/_types.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* ANSI C namespace clean utility typedefs */
-
-/* This file defines various typedefs needed by the system calls that support
-   the C library.  Basically, they're just the POSIX versions with an '_'
-   prepended.  This file lives in the `sys' directory so targets can provide
-   their own if desired (or they can put target dependant conditionals here).
-*/
-
-#ifndef	_SYS__TYPES_H
-#define _SYS__TYPES_H
-
-typedef long _off_t;
-__extension__ typedef long long _off64_t;
-
-#if defined(__INT_MAX__) && __INT_MAX__ == 2147483647
-typedef int _ssize_t;
-#else
-typedef long _ssize_t;
-#endif
-
-#define __need_wint_t
-#include <stddef.h>
-
-/* Conversion state information.  */
-typedef struct
-{
-  int __count;
-  union
-  {
-    wint_t __wch;
-    unsigned char __wchb[4];
-  } __value;		/* Value so far.  */
-} _mbstate_t;
-
-typedef int _flock_t;
-
-#endif	/* _SYS__TYPES_H */
diff --git a/newlib/libc/include/sys/cdefs.h b/newlib/libc/include/sys/cdefs.h
deleted file mode 100644
index f0b6a27b4..000000000
--- a/newlib/libc/include/sys/cdefs.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* libc/sys/linux/sys/cdefs.h - Helper macros for K&R vs. ANSI C compat. */
-
-/* Written 2000 by Werner Almesberger */
-
-/*
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Berkeley Software Design, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)cdefs.h	8.8 (Berkeley) 1/9/95
- * $FreeBSD: src/sys/sys/cdefs.h,v 1.54 2002/05/11 03:58:24 alfred Exp $
- */
-
-#ifndef _SYS_CDEFS_H
-#define _SYS_CDEFS_H
-
-#define __FBSDID(x) /* nothing */
-/*
- * Note: the goal here is not compatibility to K&R C. Since we know that we
- * have GCC which understands ANSI C perfectly well, we make use of this.
- */
-
-#define __P(args)	args
-#define __PMT(args)	args
-#define __const		const
-#define __signed	signed
-#define __volatile	volatile
-#define __DOTS    	, ...
-#define __THROW
-
-#define __ptr_t void *
-#define __long_double_t  long double
-
-#define __attribute_malloc__
-#define __attribute_pure__
-#define __attribute_format_strfmon__(a,b)
-#define __flexarr      [0]
-
-#ifdef  __cplusplus
-# define __BEGIN_DECLS  extern "C" {
-# define __END_DECLS    }
-#else
-# define __BEGIN_DECLS
-# define __END_DECLS
-#endif
-
-#ifndef __BOUNDED_POINTERS__
-# define __bounded      /* nothing */
-# define __unbounded    /* nothing */
-# define __ptrvalue     /* nothing */
-#endif
-
-#ifdef __GNUC__
-#define	__strong_reference(sym,aliassym)	\
-	extern __typeof (sym) aliassym __attribute__ ((__alias__ (#sym)));
-#ifdef __ELF__
-#ifdef __STDC__
-#define	__weak_reference(sym,alias)	\
-	__asm__(".weak " #alias);	\
-	__asm__(".equ "  #alias ", " #sym)
-#define	__warn_references(sym,msg)	\
-	__asm__(".section .gnu.warning." #sym);	\
-	__asm__(".asciz \"" msg "\"");	\
-	__asm__(".previous")
-#else
-#define	__weak_reference(sym,alias)	\
-	__asm__(".weak alias");		\
-	__asm__(".equ alias, sym")
-#define	__warn_references(sym,msg)	\
-	__asm__(".section .gnu.warning.sym"); \
-	__asm__(".asciz \"msg\"");	\
-	__asm__(".previous")
-#endif	/* __STDC__ */
-#else	/* !__ELF__ */
-#ifdef __STDC__
-#define	__weak_reference(sym,alias)	\
-	__asm__(".stabs \"_" #alias "\",11,0,0,0");	\
-	__asm__(".stabs \"_" #sym "\",1,0,0,0")
-#define	__warn_references(sym,msg)	\
-	__asm__(".stabs \"" msg "\",30,0,0,0");		\
-	__asm__(".stabs \"_" #sym "\",1,0,0,0")
-#else
-#define	__weak_reference(sym,alias)	\
-	__asm__(".stabs \"_/**/alias\",11,0,0,0");	\
-	__asm__(".stabs \"_/**/sym\",1,0,0,0")
-#define	__warn_references(sym,msg)	\
-	__asm__(".stabs msg,30,0,0,0");			\
-	__asm__(".stabs \"_/**/sym\",1,0,0,0")
-#endif	/* __STDC__ */
-#endif	/* __ELF__ */
-#endif	/* __GNUC__ */
-
-#endif /* _SYS_CDEFS_H */
diff --git a/newlib/libc/include/sys/config.h b/newlib/libc/include/sys/config.h
deleted file mode 100644
index 0859392bb..000000000
--- a/newlib/libc/include/sys/config.h
+++ /dev/null
@@ -1,176 +0,0 @@
-#ifndef __SYS_CONFIG_H__
-#define __SYS_CONFIG_H__
-
-#include <machine/ieeefp.h>  /* floating point macros */
-
-/* exceptions first */
-#if defined(__H8500__) || defined(__W65__)
-#define __SMALL_BITFIELDS
-/* ???  This conditional is true for the h8500 and the w65, defining H8300
-   in those cases probably isn't the right thing to do.  */
-#define H8300 1
-#endif
-
-/* 16 bit integer machines */
-#if defined(__Z8001__) || defined(__Z8002__) || defined(__H8500__) || defined(__W65__) || defined (__mn10200__) || defined (__AVR__)
-
-#undef INT_MAX
-#undef UINT_MAX
-#define INT_MAX 32767
-#define UINT_MAX 65535
-#endif
-
-#if defined (__H8300__) || defined (__H8300H__) || defined(__H8300S__)
-#define __SMALL_BITFIELDS
-#define H8300 1
-#undef INT_MAX
-#undef UINT_MAX
-#define INT_MAX __INT_MAX__
-#define UINT_MAX (__INT_MAX__ * 2U + 1)
-#endif
-
-#ifdef __W65__
-#define __SMALL_BITFIELDS
-#endif
-
-#if defined(__D10V__)
-#define __SMALL_BITFIELDS
-#undef INT_MAX
-#undef UINT_MAX
-#define INT_MAX __INT_MAX__
-#define UINT_MAX (__INT_MAX__ * 2U + 1)
-#define _POINTER_INT short
-#endif
-
-#if defined(__mc68hc11__) || defined(__mc68hc12__) || defined(__mc68hc1x__)
-#undef INT_MAX
-#undef UINT_MAX
-#define INT_MAX __INT_MAX__
-#define UINT_MAX (__INT_MAX__ * 2U + 1)
-#define _POINTER_INT short
-#endif
-
-#ifdef ___AM29K__
-#define _FLOAT_RET double
-#endif
-
-#ifdef __i386__
-#ifndef __unix__
-/* in other words, go32 */
-#define _FLOAT_RET double
-#endif
-#ifdef __linux__
-/* we want the reentrancy structure to be returned by a function */
-#define __DYNAMIC_REENT__
-#define HAVE_GETDATE
-#define _HAVE_SYSTYPES
-#define _READ_WRITE_RETURN_TYPE _ssize_t
-#define __LARGE64_FILES 1
-/* we use some glibc header files so turn on glibc large file feature */
-#define _LARGEFILE64_SOURCE 1
-#endif
-#endif
-
-#ifdef __mn10200__
-#define __SMALL_BITFIELDS
-#endif
-
-#ifdef __AVR__
-#define __SMALL_BITFIELDS
-#define _POINTER_INT short
-#endif
-
-#ifdef __v850
-#define __ATTRIBUTE_IMPURE_PTR__ __attribute__((__sda__))
-#endif
-
-/* For the PowerPC eabi, force the _impure_ptr to be in .sdata */
-#if defined(__PPC__)
-#if defined(_CALL_SYSV)
-#define __ATTRIBUTE_IMPURE_PTR__ __attribute__((__section__(".sdata")))
-#endif
-#ifdef __SPE__
-#define _LONG_DOUBLE double
-#endif
-#endif
-
-#ifdef __xstormy16__
-#define __SMALL_BITFIELDS
-#undef INT_MAX
-#undef UINT_MAX
-#define INT_MAX __INT_MAX__
-#define UINT_MAX (__INT_MAX__ * 2U + 1)
-#define MALLOC_ALIGNMENT 8
-#define _POINTER_INT short
-#define __BUFSIZ__ 16
-#define _REENT_SMALL
-#endif
-
-/* This block should be kept in sync with GCC's limits.h.  The point
-   of having these definitions here is to not include limits.h, which
-   would pollute the user namespace, while still using types of the
-   the correct widths when deciding how to define __int32_t and
-   __int64_t.  */
-#ifndef __INT_MAX__
-# ifdef INT_MAX
-#  define __INT_MAX__ INT_MAX
-# else
-#  define __INT_MAX__ 2147483647
-# endif
-#endif
-
-#ifndef __LONG_MAX__
-# ifdef LONG_MAX
-#  define __LONG_MAX__ LONG_MAX
-# else
-#  if defined (__alpha__) || (defined (__sparc__) && defined(__arch64__)) \
-      || defined (__sparcv9)
-#   define __LONG_MAX__ 9223372036854775807L
-#  else
-#   define __LONG_MAX__ 2147483647L
-#  endif /* __alpha__ || sparc64 */
-# endif
-#endif
-/* End of block that should be kept in sync with GCC's limits.h.  */
-
-#ifndef _POINTER_INT
-#define _POINTER_INT long
-#endif
-
-#ifdef __frv__
-#define __ATTRIBUTE_IMPURE_PTR__ __attribute__((__section__(".sdata")))
-#endif
-#undef __RAND_MAX
-#if __INT_MAX__ == 32767
-#define __RAND_MAX 32767
-#else
-#define __RAND_MAX 0x7fffffff
-#endif
-
-#if defined(__CYGWIN__)
-#include <cygwin/config.h>
-#endif
-
-#if defined(__rtems__)
-#define __FILENAME_MAX__ 255
-#define _READ_WRITE_RETURN_TYPE _ssize_t
-#endif
-
-#ifndef __IMPORT
-#define __IMPORT
-#endif
-
-/* Define return type of read/write routines.  In POSIX, the return type
-   for read()/write() is "ssize_t" but legacy newlib code has been using
-   "int" for some time.  If not specified, "int" is defaulted.  */
-#ifndef _READ_WRITE_RETURN_TYPE
-#define _READ_WRITE_RETURN_TYPE int
-#endif
-
-#ifndef __WCHAR_MAX__
-#if __INT_MAX__ == 32767 || defined (_WIN32)
-#define __WCHAR_MAX__ 0xffffu
-#endif
-#endif
-
-#endif /* __SYS_CONFIG_H__ */
diff --git a/newlib/libc/include/sys/dirent.h b/newlib/libc/include/sys/dirent.h
deleted file mode 100644
index f2f2342d5..000000000
--- a/newlib/libc/include/sys/dirent.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* <dirent.h> includes <sys/dirent.h>, which is this file.  On a
-   system which supports <dirent.h>, this file is overridden by
-   dirent.h in the libc/sys/.../sys directory.  On a system which does
-   not support <dirent.h>, we will get this file which tries to find
-   any other <dirent.h> which may be lurking around.  If there isn't
-   one, the user will get an error indicating that there is no
-   <dirent.h>.  */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include_next <dirent.h>
-#ifdef __cplusplus
-}
-#endif
diff --git a/newlib/libc/include/sys/errno.h b/newlib/libc/include/sys/errno.h
deleted file mode 100644
index e0c43de9d..000000000
--- a/newlib/libc/include/sys/errno.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/* errno is not a global variable, because that would make using it
-   non-reentrant.  Instead, its address is returned by the function
-   __errno.  */
-
-#ifndef _SYS_ERRNO_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define _SYS_ERRNO_H_
-
-#include <sys/reent.h>
-
-#ifndef _REENT_ONLY
-#define errno (*__errno())
-extern int *__errno _PARAMS ((void));
-#endif
-
-/* Please don't use these variables directly.
-   Use strerror instead. */
-extern __IMPORT _CONST char * _CONST _sys_errlist[];
-extern __IMPORT int _sys_nerr;
-#ifdef __CYGWIN__
-extern __IMPORT const char * const sys_errlist[];
-extern __IMPORT int sys_nerr;
-#endif
-
-#define __errno_r(ptr) ((ptr)->_errno)
-
-#define	EPERM 1		/* Not super-user */
-#define	ENOENT 2	/* No such file or directory */
-#define	ESRCH 3		/* No such process */
-#define	EINTR 4		/* Interrupted system call */
-#define	EIO 5		/* I/O error */
-#define	ENXIO 6		/* No such device or address */
-#define	E2BIG 7		/* Arg list too long */
-#define	ENOEXEC 8	/* Exec format error */
-#define	EBADF 9		/* Bad file number */
-#define	ECHILD 10	/* No children */
-#define	EAGAIN 11	/* No more processes */
-#define	ENOMEM 12	/* Not enough core */
-#define	EACCES 13	/* Permission denied */
-#define	EFAULT 14	/* Bad address */
-#define	ENOTBLK 15	/* Block device required */
-#define	EBUSY 16	/* Mount device busy */
-#define	EEXIST 17	/* File exists */
-#define	EXDEV 18	/* Cross-device link */
-#define	ENODEV 19	/* No such device */
-#define	ENOTDIR 20	/* Not a directory */
-#define	EISDIR 21	/* Is a directory */
-#define	EINVAL 22	/* Invalid argument */
-#define	ENFILE 23	/* Too many open files in system */
-#define	EMFILE 24	/* Too many open files */
-#define	ENOTTY 25	/* Not a typewriter */
-#define	ETXTBSY 26	/* Text file busy */
-#define	EFBIG 27	/* File too large */
-#define	ENOSPC 28	/* No space left on device */
-#define	ESPIPE 29	/* Illegal seek */
-#define	EROFS 30	/* Read only file system */
-#define	EMLINK 31	/* Too many links */
-#define	EPIPE 32	/* Broken pipe */
-#define	EDOM 33		/* Math arg out of domain of func */
-#define	ERANGE 34	/* Math result not representable */
-#define	ENOMSG 35	/* No message of desired type */
-#define	EIDRM 36	/* Identifier removed */
-#define	ECHRNG 37	/* Channel number out of range */
-#define	EL2NSYNC 38	/* Level 2 not synchronized */
-#define	EL3HLT 39	/* Level 3 halted */
-#define	EL3RST 40	/* Level 3 reset */
-#define	ELNRNG 41	/* Link number out of range */
-#define	EUNATCH 42	/* Protocol driver not attached */
-#define	ENOCSI 43	/* No CSI structure available */
-#define	EL2HLT 44	/* Level 2 halted */
-#define	EDEADLK 45	/* Deadlock condition */
-#define	ENOLCK 46	/* No record locks available */
-#define EBADE 50	/* Invalid exchange */
-#define EBADR 51	/* Invalid request descriptor */
-#define EXFULL 52	/* Exchange full */
-#define ENOANO 53	/* No anode */
-#define EBADRQC 54	/* Invalid request code */
-#define EBADSLT 55	/* Invalid slot */
-#define EDEADLOCK 56	/* File locking deadlock error */
-#define EBFONT 57	/* Bad font file fmt */
-#define ENOSTR 60	/* Device not a stream */
-#define ENODATA 61	/* No data (for no delay io) */
-#define ETIME 62	/* Timer expired */
-#define ENOSR 63	/* Out of streams resources */
-#define ENONET 64	/* Machine is not on the network */
-#define ENOPKG 65	/* Package not installed */
-#define EREMOTE 66	/* The object is remote */
-#define ENOLINK 67	/* The link has been severed */
-#define EADV 68		/* Advertise error */
-#define ESRMNT 69	/* Srmount error */
-#define	ECOMM 70	/* Communication error on send */
-#define EPROTO 71	/* Protocol error */
-#define	EMULTIHOP 74	/* Multihop attempted */
-#define	ELBIN 75	/* Inode is remote (not really error) */
-#define	EDOTDOT 76	/* Cross mount point (not really error) */
-#define EBADMSG 77	/* Trying to read unreadable message */
-#define EFTYPE 79	/* Inappropriate file type or format */
-#define ENOTUNIQ 80	/* Given log. name not unique */
-#define EBADFD 81	/* f.d. invalid for this operation */
-#define EREMCHG 82	/* Remote address changed */
-#define ELIBACC 83	/* Can't access a needed shared lib */
-#define ELIBBAD 84	/* Accessing a corrupted shared lib */
-#define ELIBSCN 85	/* .lib section in a.out corrupted */
-#define ELIBMAX 86	/* Attempting to link in too many libs */
-#define ELIBEXEC 87	/* Attempting to exec a shared library */
-#define ENOSYS 88	/* Function not implemented */
-#define ENMFILE 89      /* No more files */
-#define ENOTEMPTY 90	/* Directory not empty */
-#define ENAMETOOLONG 91	/* File or path name too long */
-#define ELOOP 92	/* Too many symbolic links */
-#define EOPNOTSUPP 95	/* Operation not supported on transport endpoint */
-#define EPFNOSUPPORT 96 /* Protocol family not supported */
-#define ECONNRESET 104  /* Connection reset by peer */
-#define ENOBUFS 105	/* No buffer space available */
-#define EAFNOSUPPORT 106 /* Address family not supported by protocol family */
-#define EPROTOTYPE 107	/* Protocol wrong type for socket */
-#define ENOTSOCK 108	/* Socket operation on non-socket */
-#define ENOPROTOOPT 109	/* Protocol not available */
-#define ESHUTDOWN 110	/* Can't send after socket shutdown */
-#define ECONNREFUSED 111	/* Connection refused */
-#define EADDRINUSE 112		/* Address already in use */
-#define ECONNABORTED 113	/* Connection aborted */
-#define ENETUNREACH 114		/* Network is unreachable */
-#define ENETDOWN 115		/* Network interface is not configured */
-#define ETIMEDOUT 116		/* Connection timed out */
-#define EHOSTDOWN 117		/* Host is down */
-#define EHOSTUNREACH 118	/* Host is unreachable */
-#define EINPROGRESS 119		/* Connection already in progress */
-#define EALREADY 120		/* Socket already connected */
-#define EDESTADDRREQ 121	/* Destination address required */
-#define EMSGSIZE 122		/* Message too long */
-#define EPROTONOSUPPORT 123	/* Unknown protocol */
-#define ESOCKTNOSUPPORT 124	/* Socket type not supported */
-#define EADDRNOTAVAIL 125	/* Address not available */
-#define ENETRESET 126
-#define EISCONN 127		/* Socket is already connected */
-#define ENOTCONN 128		/* Socket is not connected */
-#define ETOOMANYREFS 129
-#define EPROCLIM 130
-#define EUSERS 131
-#define EDQUOT 132
-#define ESTALE 133
-#define ENOTSUP 134		/* Not supported */
-#define ENOMEDIUM 135   /* No medium (in tape drive) */
-#define ENOSHARE 136    /* No such host or network path */
-#define ECASECLASH 137  /* Filename exists with different case */
-#define EILSEQ 138
-#define EOVERFLOW 139	/* Value too large for defined data type */
-
-/* From cygwin32.  */
-#define EWOULDBLOCK EAGAIN	/* Operation would block */
-
-#define __ELASTERROR 2000	/* Users can add values starting here */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_ERRNO_H */
diff --git a/newlib/libc/include/sys/fcntl.h b/newlib/libc/include/sys/fcntl.h
deleted file mode 100644
index 4cb12a368..000000000
--- a/newlib/libc/include/sys/fcntl.h
+++ /dev/null
@@ -1,183 +0,0 @@
-
-#ifndef	_FCNTL_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define	_FCNTL_
-#include <_ansi.h>
-#define	_FOPEN		(-1)	/* from sys/file.h, kernel use only */
-#define	_FREAD		0x0001	/* read enabled */
-#define	_FWRITE		0x0002	/* write enabled */
-#define	_FAPPEND	0x0008	/* append (writes guaranteed at the end) */
-#define	_FMARK		0x0010	/* internal; mark during gc() */
-#define	_FDEFER		0x0020	/* internal; defer for next gc pass */
-#define	_FASYNC		0x0040	/* signal pgrp when data ready */
-#define	_FSHLOCK	0x0080	/* BSD flock() shared lock present */
-#define	_FEXLOCK	0x0100	/* BSD flock() exclusive lock present */
-#define	_FCREAT		0x0200	/* open with file create */
-#define	_FTRUNC		0x0400	/* open with truncation */
-#define	_FEXCL		0x0800	/* error on open if file exists */
-#define	_FNBIO		0x1000	/* non blocking I/O (sys5 style) */
-#define	_FSYNC		0x2000	/* do all writes synchronously */
-#define	_FNONBLOCK	0x4000	/* non blocking I/O (POSIX style) */
-#define	_FNDELAY	_FNONBLOCK	/* non blocking I/O (4.2 style) */
-#define	_FNOCTTY	0x8000	/* don't assign a ctty on this open */
-
-#define	O_ACCMODE	(O_RDONLY|O_WRONLY|O_RDWR)
-
-/*
- * Flag values for open(2) and fcntl(2)
- * The kernel adds 1 to the open modes to turn it into some
- * combination of FREAD and FWRITE.
- */
-#define	O_RDONLY	0		/* +1 == FREAD */
-#define	O_WRONLY	1		/* +1 == FWRITE */
-#define	O_RDWR		2		/* +1 == FREAD|FWRITE */
-#define	O_APPEND	_FAPPEND
-#define	O_CREAT		_FCREAT
-#define	O_TRUNC		_FTRUNC
-#define	O_EXCL		_FEXCL
-/*	O_SYNC		_FSYNC		not posix, defined below */
-/*	O_NDELAY	_FNDELAY 	set in include/fcntl.h */
-/*	O_NDELAY	_FNBIO 		set in 5include/fcntl.h */
-#define	O_NONBLOCK	_FNONBLOCK
-#define	O_NOCTTY	_FNOCTTY
-/* For machines which care - */
-#if defined (_WIN32) || defined (__CYGWIN__)
-#define _FBINARY        0x10000
-#define _FTEXT          0x20000
-#define _FNOINHERIT	0x40000
-
-#define O_BINARY	_FBINARY
-#define O_TEXT		_FTEXT
-#define O_NOINHERIT	_FNOINHERIT
-
-/* The windows header files define versions with a leading underscore.  */
-#define _O_RDONLY	O_RDONLY
-#define _O_WRONLY	O_WRONLY
-#define _O_RDWR		O_RDWR
-#define _O_APPEND	O_APPEND
-#define _O_CREAT	O_CREAT
-#define _O_TRUNC	O_TRUNC
-#define _O_EXCL		O_EXCL
-#define _O_TEXT		O_TEXT
-#define _O_BINARY	O_BINARY
-#define _O_RAW		O_BINARY
-#define _O_NOINHERIT	O_NOINHERIT
-#endif
-
-#ifndef	_POSIX_SOURCE
-
-#define	O_SYNC		_FSYNC
-
-/*
- * Flags that work for fcntl(fd, F_SETFL, FXXXX)
- */
-#define	FAPPEND		_FAPPEND
-#define	FSYNC		_FSYNC
-#define	FASYNC		_FASYNC
-#define	FNBIO		_FNBIO
-#define	FNONBIO		_FNONBLOCK	/* XXX fix to be NONBLOCK everywhere */
-#define	FNDELAY		_FNDELAY
-
-/*
- * Flags that are disallowed for fcntl's (FCNTLCANT);
- * used for opens, internal state, or locking.
- */
-#define	FREAD		_FREAD
-#define	FWRITE		_FWRITE
-#define	FMARK		_FMARK
-#define	FDEFER		_FDEFER
-#define	FSHLOCK		_FSHLOCK
-#define	FEXLOCK		_FEXLOCK
-
-/*
- * The rest of the flags, used only for opens
- */
-#define	FOPEN		_FOPEN
-#define	FCREAT		_FCREAT
-#define	FTRUNC		_FTRUNC
-#define	FEXCL		_FEXCL
-#define	FNOCTTY		_FNOCTTY
-
-#endif	/* !_POSIX_SOURCE */
-
-/* XXX close on exec request; must match UF_EXCLOSE in user.h */
-#define	FD_CLOEXEC	1	/* posix */
-
-/* fcntl(2) requests */
-#define	F_DUPFD		0	/* Duplicate fildes */
-#define	F_GETFD		1	/* Get fildes flags (close on exec) */
-#define	F_SETFD		2	/* Set fildes flags (close on exec) */
-#define	F_GETFL		3	/* Get file flags */
-#define	F_SETFL		4	/* Set file flags */
-#ifndef	_POSIX_SOURCE
-#define	F_GETOWN 	5	/* Get owner - for ASYNC */
-#define	F_SETOWN 	6	/* Set owner - for ASYNC */
-#endif	/* !_POSIX_SOURCE */
-#define	F_GETLK  	7	/* Get record-locking information */
-#define	F_SETLK  	8	/* Set or Clear a record-lock (Non-Blocking) */
-#define	F_SETLKW 	9	/* Set or Clear a record-lock (Blocking) */
-#ifndef	_POSIX_SOURCE
-#define	F_RGETLK 	10	/* Test a remote lock to see if it is blocked */
-#define	F_RSETLK 	11	/* Set or unlock a remote lock */
-#define	F_CNVT 		12	/* Convert a fhandle to an open fd */
-#define	F_RSETLKW 	13	/* Set or Clear remote record-lock(Blocking) */
-#endif	/* !_POSIX_SOURCE */
-
-/* fcntl(2) flags (l_type field of flock structure) */
-#define	F_RDLCK		1	/* read lock */
-#define	F_WRLCK		2	/* write lock */
-#define	F_UNLCK		3	/* remove lock(s) */
-#ifndef	_POSIX_SOURCE
-#define	F_UNLKSYS	4	/* remove remote locks for a given system */
-#endif	/* !_POSIX_SOURCE */
-
-/*#include <sys/stdtypes.h>*/
-
-/* file segment locking set data type - information passed to system by user */
-struct flock {
-	short	l_type;		/* F_RDLCK, F_WRLCK, or F_UNLCK */
-	short	l_whence;	/* flag to choose starting offset */
-	long	l_start;	/* relative offset, in bytes */
-	long	l_len;		/* length, in bytes; 0 means lock to EOF */
-	short	l_pid;		/* returned with F_GETLK */
-	short	l_xxx;		/* reserved for future use */
-};
-
-#ifndef	_POSIX_SOURCE
-/* extended file segment locking set data type */
-struct eflock {
-	short	l_type;		/* F_RDLCK, F_WRLCK, or F_UNLCK */
-	short	l_whence;	/* flag to choose starting offset */
-	long	l_start;	/* relative offset, in bytes */
-	long	l_len;		/* length, in bytes; 0 means lock to EOF */
-	short	l_pid;		/* returned with F_GETLK */
-	short	l_xxx;		/* reserved for future use */
-	long	l_rpid;		/* Remote process id wanting this lock */
-	long	l_rsys;		/* Remote system id wanting this lock */
-};
-#endif	/* !_POSIX_SOURCE */
-
-
-#include <sys/types.h>
-#include <sys/stat.h>		/* sigh. for the mode bits for open/creat */
-
-extern int open _PARAMS ((const char *, int, ...));
-extern int creat _PARAMS ((const char *, mode_t));
-extern int fcntl _PARAMS ((int, int, ...));
-
-/* Provide _<systemcall> prototypes for functions provided by some versions
-   of newlib.  */
-#ifdef _COMPILING_NEWLIB
-extern int _open _PARAMS ((const char *, int, ...));
-extern int _fcntl _PARAMS ((int, int, ...));
-#ifdef __LARGE64_FILES
-extern int _open64 _PARAMS ((const char *, int, ...));
-#endif
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif	/* !_FCNTL_ */
diff --git a/newlib/libc/include/sys/features.h b/newlib/libc/include/sys/features.h
deleted file mode 100644
index f69c803ff..000000000
--- a/newlib/libc/include/sys/features.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  Written by Joel Sherrill <joel@OARcorp.com>.
- *
- *  COPYRIGHT (c) 1989-2000.
- *
- *  On-Line Applications Research Corporation (OAR).
- *
- *  Permission to use, copy, modify, and distribute this software for any
- *  purpose without fee is hereby granted, provided that this entire notice
- *  is included in all copies of any software which is or includes a copy
- *  or modification of this software.
- *
- *  THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- *  WARRANTY.  IN PARTICULAR,  THE AUTHOR MAKES NO REPRESENTATION
- *  OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
- *  SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- *  $Id$
- */
-
-#ifndef _SYS_FEATURES_H
-#define _SYS_FEATURES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* RTEMS adheres to POSIX -- 1003.1b with some features from annexes.  */
-
-#ifdef __rtems__
-#define _POSIX_JOB_CONTROL     		1
-#define _POSIX_SAVED_IDS       		1
-#define _POSIX_VERSION			199309L
-#define _POSIX_ASYNCHRONOUS_IO		1
-#define _POSIX_FSYNC			1
-#define _POSIX_MAPPED_FILES		1
-#define _POSIX_MEMLOCK			1
-#define _POSIX_MEMLOCK_RANGE		1
-#define _POSIX_MEMORY_PROTECTION	1
-#define _POSIX_MESSAGE_PASSING		1
-#define _POSIX_PRIORITIZED_IO		1
-#define _POSIX_PRIORITY_SCHEDULING	1
-#define _POSIX_REALTIME_SIGNALS		1
-#define _POSIX_SEMAPHORES		1
-#define _POSIX_SHARED_MEMORY_OBJECTS	1
-#define _POSIX_SYNCHRONIZED_IO		1
-#define _POSIX_TIMERS			1
-
-
-/* In P1003.1b but defined by drafts at least as early as P1003.1c/D10  */
-#define _POSIX_THREADS				1
-#define _POSIX_THREAD_ATTR_STACKADDR		1
-#define _POSIX_THREAD_ATTR_STACKSIZE		1
-#define _POSIX_THREAD_PRIORITY_SCHEDULING	1
-#define _POSIX_THREAD_PRIO_INHERIT		1
-#define _POSIX_THREAD_PRIO_PROTECT		1
-#define _POSIX_THREAD_PROCESS_SHARED		1
-#define _POSIX_THREAD_SAFE_FUNCTIONS		1
-
-/* P1003.4b/D8 defines the constants below this comment. */
-#define _POSIX_SPAWN				1
-#define _POSIX_TIMEOUTS				1
-#define _POSIX_CPUTIME				1
-#define _POSIX_THREAD_CPUTIME			1
-#define _POSIX_SPORADIC_SERVER			1
-#define _POSIX_THREAD_SPORADIC_SERVER		1
-#define _POSIX_DEVICE_CONTROL			1
-#define _POSIX_DEVCTL_DIRECTION			1
-#define _POSIX_INTERRUPT_CONTROL		1
-#define _POSIX_ADVISORY_INFO			1
-
-#endif
-
-#ifdef __svr4__
-# define _POSIX_JOB_CONTROL     1
-# define _POSIX_SAVED_IDS       1
-# define _POSIX_VERSION 199009L
-#endif
-
-#ifdef __CYGWIN__
-# define _POSIX_JOB_CONTROL	1
-# define _POSIX_SAVED_IDS	0
-# define _POSIX_VERSION		199009L
-# define _POSIX_THREADS                          1
-# define _POSIX_THREAD_PROCESS_SHARED            1
-# define _POSIX_THREAD_SAFE_FUNCTIONS            1
-# define _POSIX_THREAD_PRIORITY_SCHEDULING       1
-# define _POSIX_THREAD_ATTR_STACKSIZE            1
-# define _POSIX_SEMAPHORES                       1
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_FEATURES_H */
diff --git a/newlib/libc/include/sys/file.h b/newlib/libc/include/sys/file.h
deleted file mode 100644
index 58d4fac31..000000000
--- a/newlib/libc/include/sys/file.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#include <sys/fcntl.h>
diff --git a/newlib/libc/include/sys/lock.h b/newlib/libc/include/sys/lock.h
deleted file mode 100644
index 984bc5f80..000000000
--- a/newlib/libc/include/sys/lock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __SYS_LOCK_H__
-#define __SYS_LOCK_H__
-
-/* dummy lock routines for single-threaded aps */
-
-typedef int _LOCK_T;
-typedef int _LOCK_RECURSIVE_T;
-
-#define __LOCK_INIT(class,lock) static int lock = 0;
-#define __LOCK_INIT_RECURSIVE(class,lock) static int lock = 0;
-#define __lock_init(lock) {}
-#define __lock_init_recursive(lock) {}
-#define __lock_close(lock) {}
-#define __lock_close_recursive(lock) {}
-#define __lock_acquire(lock) {}
-#define __lock_acquire_recursive(lock) {}
-#define __lock_try_acquire(lock) {}
-#define __lock_try_acquire_recursive(lock) {}
-#define __lock_release(lock) {}
-#define __lock_release_recursive(lock) {}
-
-#endif /* __SYS_LOCK_H__ */
diff --git a/newlib/libc/include/sys/param.h b/newlib/libc/include/sys/param.h
deleted file mode 100644
index 9676c910a..000000000
--- a/newlib/libc/include/sys/param.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* This is a dummy <sys/param.h> file, not customized for any
-   particular system.  If there is a param.h in libc/sys/SYSDIR/sys,
-   it will override this one.  */
-
-#ifndef _SYS_PARAM_H
-# define _SYS_PARAM_H
-
-#include <sys/config.h>
-
-#ifndef BIG_ENDIAN
-#define BIG_ENDIAN 4321
-#endif
-#ifndef LITTLE_ENDIAN
-#define LITTLE_ENDIAN 1234
-#endif
-
-# define HZ (60)
-# define NOFILE	(60)
-# define PATHSIZE (1024)
-
-#define MAX(a,b) ((a) > (b) ? (a) : (b))
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-
-#ifndef BYTE_ORDER
-#ifdef __IEEE_LITTLE_ENDIAN
-#define BYTE_ORDER LITTLE_ENDIAN
-#else
-#define BYTE_ORDER BIG_ENDIAN
-#endif
-#endif
-
-#endif
diff --git a/newlib/libc/include/sys/queue.h b/newlib/libc/include/sys/queue.h
deleted file mode 100644
index af637ca03..000000000
--- a/newlib/libc/include/sys/queue.h
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)queue.h	8.5 (Berkeley) 8/20/94
- * $FreeBSD: src/sys/sys/queue.h,v 1.48 2002/04/17 14:00:37 tmm Exp $
- */
-
-#ifndef _SYS_QUEUE_H_
-#define	_SYS_QUEUE_H_
-
-#include <machine/ansi.h>	/* for __offsetof */
-
-/*
- * This file defines four types of data structures: singly-linked lists,
- * singly-linked tail queues, lists and tail queues.
- *
- * A singly-linked list is headed by a single forward pointer. The elements
- * are singly linked for minimum space and pointer manipulation overhead at
- * the expense of O(n) removal for arbitrary elements. New elements can be
- * added to the list after an existing element or at the head of the list.
- * Elements being removed from the head of the list should use the explicit
- * macro for this purpose for optimum efficiency. A singly-linked list may
- * only be traversed in the forward direction.  Singly-linked lists are ideal
- * for applications with large datasets and few or no removals or for
- * implementing a LIFO queue.
- *
- * A singly-linked tail queue is headed by a pair of pointers, one to the
- * head of the list and the other to the tail of the list. The elements are
- * singly linked for minimum space and pointer manipulation overhead at the
- * expense of O(n) removal for arbitrary elements. New elements can be added
- * to the list after an existing element, at the head of the list, or at the
- * end of the list. Elements being removed from the head of the tail queue
- * should use the explicit macro for this purpose for optimum efficiency.
- * A singly-linked tail queue may only be traversed in the forward direction.
- * Singly-linked tail queues are ideal for applications with large datasets
- * and few or no removals or for implementing a FIFO queue.
- *
- * A list is headed by a single forward pointer (or an array of forward
- * pointers for a hash table header). The elements are doubly linked
- * so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before
- * or after an existing element or at the head of the list. A list
- * may only be traversed in the forward direction.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may be traversed in either direction.
- *
- * For details on the use of these macros, see the queue(3) manual page.
- *
- *
- *			SLIST	LIST	STAILQ	TAILQ
- * _HEAD		+	+	+	+
- * _HEAD_INITIALIZER	+	+	+	+
- * _ENTRY		+	+	+	+
- * _INIT		+	+	+	+
- * _EMPTY		+	+	+	+
- * _FIRST		+	+	+	+
- * _NEXT		+	+	+	+
- * _PREV		-	-	-	+
- * _LAST		-	-	+	+
- * _FOREACH		+	+	+	+
- * _FOREACH_REVERSE	-	-	-	+
- * _INSERT_HEAD		+	+	+	+
- * _INSERT_BEFORE	-	+	-	+
- * _INSERT_AFTER	+	+	+	+
- * _INSERT_TAIL		-	-	+	+
- * _CONCAT		-	-	+	+
- * _REMOVE_HEAD		+	-	+	-
- * _REMOVE		+	+	+	+
- *
- */
-
-/*
- * Singly-linked List declarations.
- */
-#define	SLIST_HEAD(name, type)						\
-struct name {								\
-	struct type *slh_first;	/* first element */			\
-}
-
-#define	SLIST_HEAD_INITIALIZER(head)					\
-	{ NULL }
- 
-#define	SLIST_ENTRY(type)						\
-struct {								\
-	struct type *sle_next;	/* next element */			\
-}
- 
-/*
- * Singly-linked List functions.
- */
-#define	SLIST_EMPTY(head)	((head)->slh_first == NULL)
-
-#define	SLIST_FIRST(head)	((head)->slh_first)
-
-#define	SLIST_FOREACH(var, head, field)					\
-	for ((var) = SLIST_FIRST((head));				\
-	    (var);							\
-	    (var) = SLIST_NEXT((var), field))
-
-#define	SLIST_INIT(head) do {						\
-	SLIST_FIRST((head)) = NULL;					\
-} while (0)
-
-#define	SLIST_INSERT_AFTER(slistelm, elm, field) do {			\
-	SLIST_NEXT((elm), field) = SLIST_NEXT((slistelm), field);	\
-	SLIST_NEXT((slistelm), field) = (elm);				\
-} while (0)
-
-#define	SLIST_INSERT_HEAD(head, elm, field) do {			\
-	SLIST_NEXT((elm), field) = SLIST_FIRST((head));			\
-	SLIST_FIRST((head)) = (elm);					\
-} while (0)
-
-#define	SLIST_NEXT(elm, field)	((elm)->field.sle_next)
-
-#define	SLIST_REMOVE(head, elm, type, field) do {			\
-	if (SLIST_FIRST((head)) == (elm)) {				\
-		SLIST_REMOVE_HEAD((head), field);			\
-	}								\
-	else {								\
-		struct type *curelm = SLIST_FIRST((head));		\
-		while (SLIST_NEXT(curelm, field) != (elm))		\
-			curelm = SLIST_NEXT(curelm, field);		\
-		SLIST_NEXT(curelm, field) =				\
-		    SLIST_NEXT(SLIST_NEXT(curelm, field), field);	\
-	}								\
-} while (0)
-
-#define	SLIST_REMOVE_HEAD(head, field) do {				\
-	SLIST_FIRST((head)) = SLIST_NEXT(SLIST_FIRST((head)), field);	\
-} while (0)
-
-/*
- * Singly-linked Tail queue declarations.
- */
-#define	STAILQ_HEAD(name, type)						\
-struct name {								\
-	struct type *stqh_first;/* first element */			\
-	struct type **stqh_last;/* addr of last next element */		\
-}
-
-#define	STAILQ_HEAD_INITIALIZER(head)					\
-	{ NULL, &(head).stqh_first }
-
-#define	STAILQ_ENTRY(type)						\
-struct {								\
-	struct type *stqe_next;	/* next element */			\
-}
-
-/*
- * Singly-linked Tail queue functions.
- */
-#define	STAILQ_CONCAT(head1, head2) do {				\
-	if (!STAILQ_EMPTY((head2))) {					\
-		*(head1)->stqh_last = (head2)->stqh_first;		\
-		(head1)->stqh_last = (head2)->stqh_last;		\
-		STAILQ_INIT((head2));					\
-	}								\
-} while (0)
-
-#define	STAILQ_EMPTY(head)	((head)->stqh_first == NULL)
-
-#define	STAILQ_FIRST(head)	((head)->stqh_first)
-
-#define	STAILQ_FOREACH(var, head, field)				\
-	for((var) = STAILQ_FIRST((head));				\
-	   (var);							\
-	   (var) = STAILQ_NEXT((var), field))
-
-#define	STAILQ_INIT(head) do {						\
-	STAILQ_FIRST((head)) = NULL;					\
-	(head)->stqh_last = &STAILQ_FIRST((head));			\
-} while (0)
-
-#define	STAILQ_INSERT_AFTER(head, tqelm, elm, field) do {		\
-	if ((STAILQ_NEXT((elm), field) = STAILQ_NEXT((tqelm), field)) == NULL)\
-		(head)->stqh_last = &STAILQ_NEXT((elm), field);		\
-	STAILQ_NEXT((tqelm), field) = (elm);				\
-} while (0)
-
-#define	STAILQ_INSERT_HEAD(head, elm, field) do {			\
-	if ((STAILQ_NEXT((elm), field) = STAILQ_FIRST((head))) == NULL)	\
-		(head)->stqh_last = &STAILQ_NEXT((elm), field);		\
-	STAILQ_FIRST((head)) = (elm);					\
-} while (0)
-
-#define	STAILQ_INSERT_TAIL(head, elm, field) do {			\
-	STAILQ_NEXT((elm), field) = NULL;				\
-	*(head)->stqh_last = (elm);					\
-	(head)->stqh_last = &STAILQ_NEXT((elm), field);			\
-} while (0)
-
-#define	STAILQ_LAST(head, type, field)					\
-	(STAILQ_EMPTY((head)) ?						\
-		NULL :							\
-	        ((struct type *)					\
-		((char *)((head)->stqh_last) - __offsetof(struct type, field))))
-
-#define	STAILQ_NEXT(elm, field)	((elm)->field.stqe_next)
-
-#define	STAILQ_REMOVE(head, elm, type, field) do {			\
-	if (STAILQ_FIRST((head)) == (elm)) {				\
-		STAILQ_REMOVE_HEAD((head), field);			\
-	}								\
-	else {								\
-		struct type *curelm = STAILQ_FIRST((head));		\
-		while (STAILQ_NEXT(curelm, field) != (elm))		\
-			curelm = STAILQ_NEXT(curelm, field);		\
-		if ((STAILQ_NEXT(curelm, field) =			\
-		     STAILQ_NEXT(STAILQ_NEXT(curelm, field), field)) == NULL)\
-			(head)->stqh_last = &STAILQ_NEXT((curelm), field);\
-	}								\
-} while (0)
-
-#define	STAILQ_REMOVE_HEAD(head, field) do {				\
-	if ((STAILQ_FIRST((head)) =					\
-	     STAILQ_NEXT(STAILQ_FIRST((head)), field)) == NULL)		\
-		(head)->stqh_last = &STAILQ_FIRST((head));		\
-} while (0)
-
-#define	STAILQ_REMOVE_HEAD_UNTIL(head, elm, field) do {			\
-	if ((STAILQ_FIRST((head)) = STAILQ_NEXT((elm), field)) == NULL)	\
-		(head)->stqh_last = &STAILQ_FIRST((head));		\
-} while (0)
-
-/*
- * List declarations.
- */
-#define	LIST_HEAD(name, type)						\
-struct name {								\
-	struct type *lh_first;	/* first element */			\
-}
-
-#define	LIST_HEAD_INITIALIZER(head)					\
-	{ NULL }
-
-#define	LIST_ENTRY(type)						\
-struct {								\
-	struct type *le_next;	/* next element */			\
-	struct type **le_prev;	/* address of previous next element */	\
-}
-
-/*
- * List functions.
- */
-
-#define	LIST_EMPTY(head)	((head)->lh_first == NULL)
-
-#define	LIST_FIRST(head)	((head)->lh_first)
-
-#define	LIST_FOREACH(var, head, field)					\
-	for ((var) = LIST_FIRST((head));				\
-	    (var);							\
-	    (var) = LIST_NEXT((var), field))
-
-#define	LIST_INIT(head) do {						\
-	LIST_FIRST((head)) = NULL;					\
-} while (0)
-
-#define	LIST_INSERT_AFTER(listelm, elm, field) do {			\
-	if ((LIST_NEXT((elm), field) = LIST_NEXT((listelm), field)) != NULL)\
-		LIST_NEXT((listelm), field)->field.le_prev =		\
-		    &LIST_NEXT((elm), field);				\
-	LIST_NEXT((listelm), field) = (elm);				\
-	(elm)->field.le_prev = &LIST_NEXT((listelm), field);		\
-} while (0)
-
-#define	LIST_INSERT_BEFORE(listelm, elm, field) do {			\
-	(elm)->field.le_prev = (listelm)->field.le_prev;		\
-	LIST_NEXT((elm), field) = (listelm);				\
-	*(listelm)->field.le_prev = (elm);				\
-	(listelm)->field.le_prev = &LIST_NEXT((elm), field);		\
-} while (0)
-
-#define	LIST_INSERT_HEAD(head, elm, field) do {				\
-	if ((LIST_NEXT((elm), field) = LIST_FIRST((head))) != NULL)	\
-		LIST_FIRST((head))->field.le_prev = &LIST_NEXT((elm), field);\
-	LIST_FIRST((head)) = (elm);					\
-	(elm)->field.le_prev = &LIST_FIRST((head));			\
-} while (0)
-
-#define	LIST_NEXT(elm, field)	((elm)->field.le_next)
-
-#define	LIST_REMOVE(elm, field) do {					\
-	if (LIST_NEXT((elm), field) != NULL)				\
-		LIST_NEXT((elm), field)->field.le_prev = 		\
-		    (elm)->field.le_prev;				\
-	*(elm)->field.le_prev = LIST_NEXT((elm), field);		\
-} while (0)
-
-/*
- * Tail queue declarations.
- */
-#define	TAILQ_HEAD(name, type)						\
-struct name {								\
-	struct type *tqh_first;	/* first element */			\
-	struct type **tqh_last;	/* addr of last next element */		\
-}
-
-#define	TAILQ_HEAD_INITIALIZER(head)					\
-	{ NULL, &(head).tqh_first }
-
-#define	TAILQ_ENTRY(type)						\
-struct {								\
-	struct type *tqe_next;	/* next element */			\
-	struct type **tqe_prev;	/* address of previous next element */	\
-}
-
-/*
- * Tail queue functions.
- */
-#define	TAILQ_CONCAT(head1, head2, field) do {				\
-	if (!TAILQ_EMPTY(head2)) {					\
-		*(head1)->tqh_last = (head2)->tqh_first;		\
-		(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last;	\
-		(head1)->tqh_last = (head2)->tqh_last;			\
-		TAILQ_INIT((head2));					\
-	}								\
-} while (0)
-
-#define	TAILQ_EMPTY(head)	((head)->tqh_first == NULL)
-
-#define	TAILQ_FIRST(head)	((head)->tqh_first)
-
-#define	TAILQ_FOREACH(var, head, field)					\
-	for ((var) = TAILQ_FIRST((head));				\
-	    (var);							\
-	    (var) = TAILQ_NEXT((var), field))
-
-#define	TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
-	for ((var) = TAILQ_LAST((head), headname);			\
-	    (var);							\
-	    (var) = TAILQ_PREV((var), headname, field))
-
-#define	TAILQ_INIT(head) do {						\
-	TAILQ_FIRST((head)) = NULL;					\
-	(head)->tqh_last = &TAILQ_FIRST((head));			\
-} while (0)
-
-#define	TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
-	if ((TAILQ_NEXT((elm), field) = TAILQ_NEXT((listelm), field)) != NULL)\
-		TAILQ_NEXT((elm), field)->field.tqe_prev = 		\
-		    &TAILQ_NEXT((elm), field);				\
-	else								\
-		(head)->tqh_last = &TAILQ_NEXT((elm), field);		\
-	TAILQ_NEXT((listelm), field) = (elm);				\
-	(elm)->field.tqe_prev = &TAILQ_NEXT((listelm), field);		\
-} while (0)
-
-#define	TAILQ_INSERT_BEFORE(listelm, elm, field) do {			\
-	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
-	TAILQ_NEXT((elm), field) = (listelm);				\
-	*(listelm)->field.tqe_prev = (elm);				\
-	(listelm)->field.tqe_prev = &TAILQ_NEXT((elm), field);		\
-} while (0)
-
-#define	TAILQ_INSERT_HEAD(head, elm, field) do {			\
-	if ((TAILQ_NEXT((elm), field) = TAILQ_FIRST((head))) != NULL)	\
-		TAILQ_FIRST((head))->field.tqe_prev =			\
-		    &TAILQ_NEXT((elm), field);				\
-	else								\
-		(head)->tqh_last = &TAILQ_NEXT((elm), field);		\
-	TAILQ_FIRST((head)) = (elm);					\
-	(elm)->field.tqe_prev = &TAILQ_FIRST((head));			\
-} while (0)
-
-#define	TAILQ_INSERT_TAIL(head, elm, field) do {			\
-	TAILQ_NEXT((elm), field) = NULL;				\
-	(elm)->field.tqe_prev = (head)->tqh_last;			\
-	*(head)->tqh_last = (elm);					\
-	(head)->tqh_last = &TAILQ_NEXT((elm), field);			\
-} while (0)
-
-#define	TAILQ_LAST(head, headname)					\
-	(*(((struct headname *)((head)->tqh_last))->tqh_last))
-
-#define	TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
-
-#define	TAILQ_PREV(elm, headname, field)				\
-	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-
-#define	TAILQ_REMOVE(head, elm, field) do {				\
-	if ((TAILQ_NEXT((elm), field)) != NULL)				\
-		TAILQ_NEXT((elm), field)->field.tqe_prev = 		\
-		    (elm)->field.tqe_prev;				\
-	else								\
-		(head)->tqh_last = (elm)->field.tqe_prev;		\
-	*(elm)->field.tqe_prev = TAILQ_NEXT((elm), field);		\
-} while (0)
-
-
-#ifdef _KERNEL
-
-/*
- * XXX insque() and remque() are an old way of handling certain queues.
- * They bogusly assumes that all queue heads look alike.
- */
-
-struct quehead {
-	struct quehead *qh_link;
-	struct quehead *qh_rlink;
-};
-
-#ifdef	__GNUC__
-
-static __inline void
-insque(void *a, void *b)
-{
-	struct quehead *element = (struct quehead *)a,
-		 *head = (struct quehead *)b;
-
-	element->qh_link = head->qh_link;
-	element->qh_rlink = head;
-	head->qh_link = element;
-	element->qh_link->qh_rlink = element;
-}
-
-static __inline void
-remque(void *a)
-{
-	struct quehead *element = (struct quehead *)a;
-
-	element->qh_link->qh_rlink = element->qh_rlink;
-	element->qh_rlink->qh_link = element->qh_link;
-	element->qh_rlink = 0;
-}
-
-#else /* !__GNUC__ */
-
-void	insque(void *a, void *b);
-void	remque(void *a);
-
-#endif /* __GNUC__ */
-
-#endif /* _KERNEL */
-
-#endif /* !_SYS_QUEUE_H_ */
diff --git a/newlib/libc/include/sys/reent.h b/newlib/libc/include/sys/reent.h
deleted file mode 100644
index a5d6f5c9e..000000000
--- a/newlib/libc/include/sys/reent.h
+++ /dev/null
@@ -1,752 +0,0 @@
-/* This header file provides the reentrancy.  */
-
-/* WARNING: All identifiers here must begin with an underscore.  This file is
-   included by stdio.h and others and we therefore must only use identifiers
-   in the namespace allotted to us.  */
-
-#ifndef _SYS_REENT_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define _SYS_REENT_H_
-
-#include <_ansi.h>
-#include <sys/_types.h>
-
-#ifndef __Long
-#if __LONG_MAX__ == 2147483647L
-#define __Long long
-typedef unsigned __Long __ULong;
-#elif __INT_MAX__ == 2147483647
-#define __Long int
-typedef unsigned __Long __ULong;
-#endif
-#endif
-
-#if !defined( __Long)
-#include <sys/types.h>
-#endif
-
-#ifndef __Long
-#define __Long __int32_t
-typedef __uint32_t __ULong;
-#endif
-
-/*
- * If _REENT_SMALL is defined, we make struct _reent as small as possible,
- * by having nearly everything possible allocated at first use.
- */
-
-struct _Bigint 
-{
-  struct _Bigint *_next;
-  int _k, _maxwds, _sign, _wds;
-  __ULong _x[1];
-};
-
-/* needed by reentrant structure */
-struct __tm
-{
-  int   __tm_sec;
-  int   __tm_min;
-  int   __tm_hour;
-  int   __tm_mday;
-  int   __tm_mon;
-  int   __tm_year;
-  int   __tm_wday;
-  int   __tm_yday;
-  int   __tm_isdst;
-};
-
-/*
- * atexit() support.  For _REENT_SMALL, we limit to 32 max.
- */
-
-#define	_ATEXIT_SIZE 32	/* must be at least 32 to guarantee ANSI conformance */
-
-struct _on_exit_args {
-	void *  _fnargs[_ATEXIT_SIZE];	        /* fn args for on_exit */
-	__ULong _fntypes;           	        /* type of exit routine -
-						   Must have at least _ATEXIT_SIZE bits */
-};
-
-#ifdef _REENT_SMALL
-struct _atexit {
-	int	_ind;				/* next index in this table */
-	void	(*_fns[_ATEXIT_SIZE])(void);	/* the table itself */
-        struct _on_exit_args * _on_exit_args_ptr;
-};
-#else
-struct _atexit {
-	struct	_atexit *_next;			/* next in list */
-	int	_ind;				/* next index in this table */
-	void	(*_fns[_ATEXIT_SIZE])(void);	/* the table itself */
-        struct _on_exit_args _on_exit_args;
-};
-#endif
-
-/*
- * Stdio buffers.
- *
- * This and __FILE are defined here because we need them for struct _reent,
- * but we don't want stdio.h included when stdlib.h is.
- */
-
-struct __sbuf {
-	unsigned char *_base;
-	int	_size;
-};
-
-/*
- * We need fpos_t for the following, but it doesn't have a leading "_",
- * so we use _fpos_t instead.
- */
-
-typedef long _fpos_t;		/* XXX must match off_t in <sys/types.h> */
-				/* (and must be `long' for now) */
-
-#ifdef __LARGE64_FILES
-typedef _off64_t _fpos64_t;
-#endif
-
-/*
- * Stdio state variables.
- *
- * The following always hold:
- *
- *	if (_flags&(__SLBF|__SWR)) == (__SLBF|__SWR),
- *		_lbfsize is -_bf._size, else _lbfsize is 0
- *	if _flags&__SRD, _w is 0
- *	if _flags&__SWR, _r is 0
- *
- * This ensures that the getc and putc macros (or inline functions) never
- * try to write or read from a file that is in `read' or `write' mode.
- * (Moreover, they can, and do, automatically switch from read mode to
- * write mode, and back, on "r+" and "w+" files.)
- *
- * _lbfsize is used only to make the inline line-buffered output stream
- * code as compact as possible.
- *
- * _ub, _up, and _ur are used when ungetc() pushes back more characters
- * than fit in the current _bf, or when ungetc() pushes back a character
- * that does not match the previous one in _bf.  When this happens,
- * _ub._base becomes non-nil (i.e., a stream has ungetc() data iff
- * _ub._base!=NULL) and _up and _ur save the current values of _p and _r.
- */
-
-#ifdef _REENT_SMALL
-/*
- * struct __sFILE_fake is the start of a struct __sFILE, with only the
- * minimal fields allocated.  In __sinit() we really allocate the 3
- * standard streams, etc., and point away from this fake.
- */
-struct __sFILE_fake {
-  unsigned char *_p;	/* current position in (some) buffer */
-  int	_r;		/* read space left for getc() */
-  int	_w;		/* write space left for putc() */
-  short	_flags;		/* flags, below; this FILE is free if 0 */
-  short	_file;		/* fileno, if Unix descriptor, else -1 */
-  struct __sbuf _bf;	/* the buffer (at least 1 byte, if !NULL) */
-  int	_lbfsize;	/* 0 or -_bf._size, for inline putc */
-
-  struct _reent *_data;
-};
-/* CHECK_INIT() comes from stdio/local.h; be sure to include that.  */
-# define _REENT_SMALL_CHECK_INIT(fp) CHECK_INIT(fp)
-#else
-# define _REENT_SMALL_CHECK_INIT(fp) /* nothing */
-#endif
-
-struct __sFILE {
-  unsigned char *_p;	/* current position in (some) buffer */
-  int	_r;		/* read space left for getc() */
-  int	_w;		/* write space left for putc() */
-  short	_flags;		/* flags, below; this FILE is free if 0 */
-  short	_file;		/* fileno, if Unix descriptor, else -1 */
-  struct __sbuf _bf;	/* the buffer (at least 1 byte, if !NULL) */
-  int	_lbfsize;	/* 0 or -_bf._size, for inline putc */
-
-#ifdef _REENT_SMALL
-  struct _reent *_data;
-#endif
-
-  /* operations */
-  _PTR	_cookie;	/* cookie passed to io functions */
-
-  _READ_WRITE_RETURN_TYPE _EXFUN((*_read),(_PTR _cookie, char *_buf, int _n));
-  _READ_WRITE_RETURN_TYPE _EXFUN((*_write),(_PTR _cookie, const char *_buf,
-					    int _n));
-  _fpos_t _EXFUN((*_seek),(_PTR _cookie, _fpos_t _offset, int _whence));
-  int	_EXFUN((*_close),(_PTR _cookie));
-
-  /* separate buffer for long sequences of ungetc() */
-  struct __sbuf _ub;	/* ungetc buffer */
-  unsigned char *_up;	/* saved _p when _p is doing ungetc data */
-  int	_ur;		/* saved _r when _r is counting ungetc data */
-
-  /* tricks to meet minimum requirements even when malloc() fails */
-  unsigned char _ubuf[3];	/* guarantee an ungetc() buffer */
-  unsigned char _nbuf[1];	/* guarantee a getc() buffer */
-
-  /* separate buffer for fgetline() when line crosses buffer boundary */
-  struct __sbuf _lb;	/* buffer for fgetline() */
-
-  /* Unix stdio files get aligned to block boundaries on fseek() */
-  int	_blksize;	/* stat.st_blksize (may be != _bf._size) */
-  int	_offset;	/* current lseek offset */
-
-#ifndef _REENT_SMALL
-  struct _reent *_data;	/* Here for binary compatibility? Remove? */
-#endif
-
-#ifndef __SINGLE_THREAD__
-  _flock_t _lock;	/* for thread-safety locking */
-#endif
-};
-
-#ifdef __LARGE64_FILES
-struct __sFILE64 {
-  unsigned char *_p;	/* current position in (some) buffer */
-  int	_r;		/* read space left for getc() */
-  int	_w;		/* write space left for putc() */
-  short	_flags;		/* flags, below; this FILE is free if 0 */
-  short	_file;		/* fileno, if Unix descriptor, else -1 */
-  struct __sbuf _bf;	/* the buffer (at least 1 byte, if !NULL) */
-  int	_lbfsize;	/* 0 or -_bf._size, for inline putc */
-
-  struct _reent *_data;
-
-  /* operations */
-  _PTR	_cookie;	/* cookie passed to io functions */
-
-  _READ_WRITE_RETURN_TYPE _EXFUN((*_read),(_PTR _cookie, char *_buf, int _n));
-  _READ_WRITE_RETURN_TYPE _EXFUN((*_write),(_PTR _cookie, const char *_buf,
-					    int _n));
-  _fpos_t _EXFUN((*_seek),(_PTR _cookie, _fpos_t _offset, int _whence));
-  int	_EXFUN((*_close),(_PTR _cookie));
-
-  /* separate buffer for long sequences of ungetc() */
-  struct __sbuf _ub;	/* ungetc buffer */
-  unsigned char *_up;	/* saved _p when _p is doing ungetc data */
-  int	_ur;		/* saved _r when _r is counting ungetc data */
-
-  /* tricks to meet minimum requirements even when malloc() fails */
-  unsigned char _ubuf[3];	/* guarantee an ungetc() buffer */
-  unsigned char _nbuf[1];	/* guarantee a getc() buffer */
-
-  /* separate buffer for fgetline() when line crosses buffer boundary */
-  struct __sbuf _lb;	/* buffer for fgetline() */
-
-  /* Unix stdio files get aligned to block boundaries on fseek() */
-  int	_blksize;	/* stat.st_blksize (may be != _bf._size) */
-  int   _flags2;        /* for future use */
-
-  _off64_t _offset;     /* current lseek offset */
-  _fpos64_t _EXFUN((*_seek64),(_PTR _cookie, _fpos64_t _offset, int _whence));
-
-#ifndef __SINGLE_THREAD__
-  _flock_t _lock;	/* for thread-safety locking */
-#endif
-};
-typedef struct __sFILE64 __FILE;
-#else
-typedef struct __sFILE   __FILE;
-#endif /* __LARGE64_FILES */
-
-struct _glue 
-{
-  struct _glue *_next;
-  int _niobs;
-  __FILE *_iobs;
-};
-
-/*
- * rand48 family support
- *
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-#define        _RAND48_SEED_0  (0x330e)
-#define        _RAND48_SEED_1  (0xabcd)
-#define        _RAND48_SEED_2  (0x1234)
-#define        _RAND48_MULT_0  (0xe66d)
-#define        _RAND48_MULT_1  (0xdeec)
-#define        _RAND48_MULT_2  (0x0005)
-#define        _RAND48_ADD     (0x000b)
-struct _rand48 {
-  unsigned short _seed[3];
-  unsigned short _mult[3];
-  unsigned short _add;
-#ifdef _REENT_SMALL
-  /* Put this in here as well, for good luck.  */
-  __extension__ unsigned long long _rand_next;
-#endif
-};
-
-/* How big the some arrays are.  */
-#define _REENT_EMERGENCY_SIZE 25
-#define _REENT_ASCTIME_SIZE 26
-#define _REENT_SIGNAL_SIZE 24
-
-/*
- * struct _reent
- *
- * This structure contains *all* globals needed by the library.
- * It's raison d'etre is to facilitate threads by making all library routines
- * reentrant.  IE: All state information is contained here.
- */
-
-#ifdef _REENT_SMALL
-
-struct _mprec
-{
-  /* used by mprec routines */
-  struct _Bigint *_result;
-  int _result_k;
-  struct _Bigint *_p5s;
-  struct _Bigint **_freelist;
-};
-
-
-struct _misc_reent
-{
-  /* miscellaneous reentrant data */
-  char *_strtok_last;
-  _mbstate_t _mblen_state;
-  _mbstate_t _wctomb_state;
-  _mbstate_t _mbtowc_state;
-  char _l64a_buf[8];
-  int _getdate_err;
-  _mbstate_t _mbrlen_state;
-  _mbstate_t _mbrtowc_state;
-  _mbstate_t _mbsrtowcs_state;
-  _mbstate_t _wcrtomb_state;
-  _mbstate_t _wcsrtombs_state;
-};
-
-/* This version of _reent is layed our with "int"s in pairs, to help
- * ports with 16-bit int's but 32-bit pointers, align nicely.  */
-struct _reent
-{
-
-  /* FILE is a big struct and may change over time.  To try to achieve binary
-     compatibility with future versions, put stdin,stdout,stderr here.
-     These are pointers into member __sf defined below.  */
-  __FILE *_stdin, *_stdout, *_stderr;	/* XXX */
-
-  int _errno;			/* local copy of errno */
-
-  int  _inc;			/* used by tmpnam */
-
-  char *_emergency;
- 
-  int __sdidinit;		/* 1 means stdio has been init'd */
-
-  int _current_category;	/* used by setlocale */
-  _CONST char *_current_locale;
-
-  struct _mprec *_mp;
-
-  void _EXFUN((*__cleanup),(struct _reent *));
-
-  int _gamma_signgam;
-
-  /* used by some fp conversion routines */
-  int _cvtlen;			/* should be size_t */
-  char *_cvtbuf;
-
-  struct _rand48 *_r48;
-  struct __tm *_localtime_buf;
-  char *_asctime_buf;
-
-  /* signal info */
-  void (**(_sig_func))(int);
-
-  /* atexit stuff */
-  struct _atexit _atexit;
-
-  struct _glue __sglue;			/* root of glue chain */
-  __FILE *__sf;			        /* file descriptors */
-  struct __sFILE_fake __sf_fake;	/* fake initial stdin/out/err */
-  struct _misc_reent *_misc;            /* strtok, multibyte states */
-  char *_signal_buf;                    /* strsignal */
-};
-
-#define _REENT_INIT(var) \
-  { (__FILE *)&var.__sf_fake, (__FILE *)&var.__sf_fake, \
-    (__FILE *)&var.__sf_fake, 0, 0, _NULL, 0, 0, \
-    "C", _NULL, _NULL, 0, 0, _NULL, _NULL, _NULL, _NULL, _NULL, \
-    { 0, _NULL, _NULL, 0 }, { _NULL, 0, _NULL }, _NULL, 0, _NULL, _NULL }
-
-#define _REENT_INIT_PTR(var) \
-  { var->_stdin = (__FILE *)&var->__sf_fake; \
-    var->_stdout = (__FILE *)&var->__sf_fake; \
-    var->_stderr = (__FILE *)&var->__sf_fake; \
-    var->_errno = 0; \
-    var->_inc = 0; \
-    var->_emergency = _NULL; \
-    var->__sdidinit = 0; \
-    var->_current_category = 0; \
-    var->_current_locale = "C"; \
-    var->_mp = _NULL; \
-    var->__cleanup = _NULL; \
-    var->_gamma_signgam = 0; \
-    var->_cvtlen = 0; \
-    var->_cvtbuf = _NULL; \
-    var->_r48 = _NULL; \
-    var->_localtime_buf = _NULL; \
-    var->_asctime_buf = _NULL; \
-    var->_sig_func = _NULL; \
-    var->_atexit._ind = 0; \
-    var->_atexit._fns[0] = _NULL; \
-    var->_atexit._on_exit_args = _NULL; \
-    var->__sglue._next = _NULL; \
-    var->__sglue._niobs = 0; \
-    var->__sglue._iobs = _NULL; \
-    var->__sf = 0; \
-    var->_misc = _NULL; \
-    var->_signal_buf = _NULL; \
-    var->_getdate_err = 0; \
-    var->__sf_fake._p = _NULL; \
-    var->__sf_fake._r = 0; \
-    var->__sf_fake._w = 0; \
-    var->__sf_fake._flags = 0; \
-    var->__sf_fake._file = 0; \
-    var->__sf_fake._lbfsize = 0; \
-    var->__sf_fake._data = _NULL; \
-  }
-
-/* Only built the assert() calls if we are built with debugging.  */
-#if DEBUG 
-#include <assert.h>
-#else
-#define assert(x) ((void)0)
-#endif
-
-/* Generic _REENT check macro.  */
-#define _REENT_CHECK(var, what, type, size, init) do { \
-  struct _reent *_r = (var); \
-  if (_r->what == NULL) { \
-    _r->what = (type)malloc(size); \
-    assert(_r->what); \
-    init; \
-  } \
-} while (0)
-
-#define _REENT_CHECK_TM(var) \
-  _REENT_CHECK(var, _localtime_buf, struct __tm *, sizeof *((var)->_localtime_buf), \
-    /* nothing */)
-
-#define _REENT_CHECK_ASCTIME_BUF(var) \
-  _REENT_CHECK(var, _asctime_buf, char *, _REENT_ASCTIME_SIZE, \
-    memset((var)->_asctime_buf, 0, _REENT_ASCTIME_SIZE))
-
-/* Handle the dynamically allocated rand48 structure. */
-#define _REENT_INIT_RAND48(var) do { \
-  struct _reent *_r = (var); \
-  _r->_r48->_seed[0] = _RAND48_SEED_0; \
-  _r->_r48->_seed[1] = _RAND48_SEED_1; \
-  _r->_r48->_seed[2] = _RAND48_SEED_2; \
-  _r->_r48->_mult[0] = _RAND48_MULT_0; \
-  _r->_r48->_mult[1] = _RAND48_MULT_1; \
-  _r->_r48->_mult[2] = _RAND48_MULT_2; \
-  _r->_r48->_add = _RAND48_ADD; \
-} while (0)
-#define _REENT_CHECK_RAND48(var) \
-  _REENT_CHECK(var, _r48, struct _rand48 *, sizeof *((var)->_r48), _REENT_INIT_RAND48((var)))
-
-#define _REENT_INIT_MP(var) do { \
-  struct _reent *_r = (var); \
-  _r->_mp->_result_k = 0; \
-  _r->_mp->_result = _r->_mp->_p5s = _NULL; \
-  _r->_mp->_freelist = _NULL; \
-} while (0)
-#define _REENT_CHECK_MP(var) \
-  _REENT_CHECK(var, _mp, struct _mprec *, sizeof *((var)->_mp), _REENT_INIT_MP(var))
-
-#define _REENT_CHECK_EMERGENCY(var) \
-  _REENT_CHECK(var, _emergency, char *, _REENT_EMERGENCY_SIZE, /* nothing */)
-
-#define _REENT_INIT_MISC(var) do { \
-  struct _reent *_r = (var); \
-  _r->_misc->_strtok_last = _NULL; \
-  _r->_misc->_mblen_state.__count = 0; \
-  _r->_misc->_mblen_state.__value.__wch = 0; \
-  _r->_misc->_wctomb_state.__count = 0; \
-  _r->_misc->_wctomb_state.__value.__wch = 0; \
-  _r->_misc->_mbtowc_state.__count = 0; \
-  _r->_misc->_mbtowc_state.__value.__wch = 0; \
-  _r->_misc->_mbrlen_state.__count = 0; \
-  _r->_misc->_mbrlen_state.__value.__wch = 0; \
-  _r->_misc->_mbrtowc_state.__count = 0; \
-  _r->_misc->_mbrtowc_state.__value.__wch = 0; \
-  _r->_misc->_mbsrtowcs_state.__count = 0; \
-  _r->_misc->_mbsrtowcs_state.__value.__wch = 0; \
-  _r->_misc->_wcrtomb_state.__count = 0; \
-  _r->_misc->_wcrtomb_state.__value.__wch = 0; \
-  _r->_misc->_wcsrtombs_state.__count = 0; \
-  _r->_misc->_wcsrtombs_state.__value.__wch = 0; \
-  _r->_misc->_l64a_buf[0] = '\0'; \
-  _r->_misc->_getdate_err = 0; \
-} while (0)
-#define _REENT_CHECK_MISC(var) \
-  _REENT_CHECK(var, _misc, struct _misc_reent *, sizeof *((var)->_misc), _REENT_INIT_MISC(var))
-
-#define _REENT_CHECK_SIGNAL_BUF(var) \
-  _REENT_CHECK(var, _signal_buf, char *, _REENT_SIGNAL_SIZE, /* nothing */)
-
-#define _REENT_SIGNGAM(ptr)	((ptr)->_gamma_signgam)
-#define _REENT_RAND_NEXT(ptr)	((ptr)->_r48->_rand_next)
-#define _REENT_RAND48_SEED(ptr)	((ptr)->_r48->_seed)
-#define _REENT_RAND48_MULT(ptr)	((ptr)->_r48->_mult)
-#define _REENT_RAND48_ADD(ptr)	((ptr)->_r48->_add)
-#define _REENT_MP_RESULT(ptr)	((ptr)->_mp->_result)
-#define _REENT_MP_RESULT_K(ptr)	((ptr)->_mp->_result_k)
-#define _REENT_MP_P5S(ptr)	((ptr)->_mp->_p5s)
-#define _REENT_MP_FREELIST(ptr)	((ptr)->_mp->_freelist)
-#define _REENT_ASCTIME_BUF(ptr)	((ptr)->_asctime_buf)
-#define _REENT_TM(ptr)		((ptr)->_localtime_buf)
-#define _REENT_EMERGENCY(ptr)	((ptr)->_emergency)
-#define _REENT_STRTOK_LAST(ptr)	((ptr)->_misc->_strtok_last)
-#define _REENT_MBLEN_STATE(ptr)	((ptr)->_misc->_mblen_state)
-#define _REENT_MBTOWC_STATE(ptr)((ptr)->_misc->_mbtowc_state)
-#define _REENT_WCTOMB_STATE(ptr)((ptr)->_misc->_wctomb_state)
-#define _REENT_MBRLEN_STATE(ptr) ((ptr)->_misc->_mbrlen_state)
-#define _REENT_MBRTOWC_STATE(ptr) ((ptr)->_misc->_mbrtowc_state)
-#define _REENT_MBSRTOWCS_STATE(ptr) ((ptr)->_misc->_mbsrtowcs_state)
-#define _REENT_WCRTOMB_STATE(ptr) ((ptr)->_misc->_wcrtomb_state)
-#define _REENT_WCSRTOMBS_STATE(ptr) ((ptr)->_misc->_wcsrtombs_state)
-#define _REENT_L64A_BUF(ptr)    ((ptr)->_misc->_l64a_buf)
-#define _REENT_GETDATE_ERR_P(ptr) (&((ptr)->_misc->_getdate_err))
-#define _REENT_SIGNAL_BUF(ptr)  ((ptr)->_signal_buf)
-
-#else /* !_REENT_SMALL */
-
-struct _reent
-{
-  int _errno;			/* local copy of errno */
-
-  /* FILE is a big struct and may change over time.  To try to achieve binary
-     compatibility with future versions, put stdin,stdout,stderr here.
-     These are pointers into member __sf defined below.  */
-  __FILE *_stdin, *_stdout, *_stderr;
-
-  int  _inc;			/* used by tmpnam */
-  char _emergency[_REENT_EMERGENCY_SIZE];
- 
-  int _current_category;	/* used by setlocale */
-  _CONST char *_current_locale;
-
-  int __sdidinit;		/* 1 means stdio has been init'd */
-
-  void _EXFUN((*__cleanup),(struct _reent *));
-
-  /* used by mprec routines */
-  struct _Bigint *_result;
-  int _result_k;
-  struct _Bigint *_p5s;
-  struct _Bigint **_freelist;
-
-  /* used by some fp conversion routines */
-  int _cvtlen;			/* should be size_t */
-  char *_cvtbuf;
-
-  union
-    {
-      struct
-        {
-          unsigned int _unused_rand;
-          char * _strtok_last;
-          char _asctime_buf[_REENT_ASCTIME_SIZE];
-          struct __tm _localtime_buf;
-          int _gamma_signgam;
-          __extension__ unsigned long long _rand_next;
-          struct _rand48 _r48;
-          _mbstate_t _mblen_state;
-          _mbstate_t _mbtowc_state;
-          _mbstate_t _wctomb_state;
-          char _l64a_buf[8];
-          char _signal_buf[_REENT_SIGNAL_SIZE];
-          int _getdate_err;  
-          _mbstate_t _mbrlen_state;
-          _mbstate_t _mbrtowc_state;
-          _mbstate_t _mbsrtowcs_state;
-          _mbstate_t _wcrtomb_state;
-          _mbstate_t _wcsrtombs_state;
-        } _reent;
-  /* Two next two fields were once used by malloc.  They are no longer
-     used. They are used to preserve the space used before so as to
-     allow addition of new reent fields and keep binary compatibility.   */ 
-      struct
-        {
-#define _N_LISTS 30
-          unsigned char * _nextf[_N_LISTS];
-          unsigned int _nmalloc[_N_LISTS];
-        } _unused;
-    } _new;
-
-  /* atexit stuff */
-  struct _atexit *_atexit;	/* points to head of LIFO stack */
-  struct _atexit _atexit0;	/* one guaranteed table, required by ANSI */
-
-  /* signal info */
-  void (**(_sig_func))(int);
-
-  /* These are here last so that __FILE can grow without changing the offsets
-     of the above members (on the off chance that future binary compatibility
-     would be broken otherwise).  */
-  struct _glue __sglue;		/* root of glue chain */
-  __FILE __sf[3];  		/* first three file descriptors */
-};
-
-#define _REENT_INIT(var) \
-  { 0, &var.__sf[0], &var.__sf[1], &var.__sf[2], 0, "", 0, "C", \
-    0, _NULL, _NULL, 0, _NULL, _NULL, 0, _NULL, { {0, _NULL, "", \
-    { 0,0,0,0,0,0,0,0}, 0, 1, \
-    {{_RAND48_SEED_0, _RAND48_SEED_1, _RAND48_SEED_2}, \
-     {_RAND48_MULT_0, _RAND48_MULT_1, _RAND48_MULT_2}, _RAND48_ADD}, \
-    {0, {0}}, {0, {0}}, {0, {0}}, "", "", 0, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}} } } }
-
-#define _REENT_INIT_PTR(var) \
-  { int i; \
-    char *tmp_ptr; \
-    var->_errno = 0; \
-    var->_stdin = &var->__sf[0]; \
-    var->_stdout = &var->__sf[1]; \
-    var->_stderr = &var->__sf[2]; \
-    var->_inc = 0; \
-    for (i = 0; i < _REENT_EMERGENCY_SIZE; ++i) \
-      var->_emergency[i] = 0; \
-    var->_current_category = 0; \
-    var->_current_locale = "C"; \
-    var->__sdidinit = 0; \
-    var->__cleanup = _NULL; \
-    var->_result = _NULL; \
-    var->_result_k = 0; \
-    var->_p5s = _NULL; \
-    var->_freelist = _NULL; \
-    var->_cvtlen = 0; \
-    var->_cvtbuf = _NULL; \
-    var->_new._reent._unused_rand = 0; \
-    var->_new._reent._strtok_last = _NULL; \
-    var->_new._reent._asctime_buf[0] = 0; \
-    tmp_ptr = (char *)&var->_new._reent._localtime_buf; \
-    for (i = 0; i < sizeof(struct __tm); ++i) \
-      tmp_ptr[i] = 0; \
-    var->_new._reent._gamma_signgam = 0; \
-    var->_new._reent._rand_next = 1; \
-    var->_new._reent._r48._seed[0] = _RAND48_SEED_0; \
-    var->_new._reent._r48._seed[1] = _RAND48_SEED_1; \
-    var->_new._reent._r48._seed[2] = _RAND48_SEED_2; \
-    var->_new._reent._r48._mult[0] = _RAND48_MULT_0; \
-    var->_new._reent._r48._mult[1] = _RAND48_MULT_1; \
-    var->_new._reent._r48._mult[2] = _RAND48_MULT_2; \
-    var->_new._reent._r48._add = _RAND48_ADD; \
-    var->_new._reent._mblen_state.__count = 0; \
-    var->_new._reent._mblen_state.__value.__wch = 0; \
-    var->_new._reent._mbtowc_state.__count = 0; \
-    var->_new._reent._mbtowc_state.__value.__wch = 0; \
-    var->_new._reent._wctomb_state.__count = 0; \
-    var->_new._reent._wctomb_state.__value.__wch = 0; \
-    var->_new._reent._mbrlen_state.__count = 0; \
-    var->_new._reent._mbrlen_state.__value.__wch = 0; \
-    var->_new._reent._mbrtowc_state.__count = 0; \
-    var->_new._reent._mbrtowc_state.__value.__wch = 0; \
-    var->_new._reent._mbsrtowcs_state.__count = 0; \
-    var->_new._reent._mbsrtowcs_state.__value.__wch = 0; \
-    var->_new._reent._wcrtomb_state.__count = 0; \
-    var->_new._reent._wcrtomb_state.__value.__wch = 0; \
-    var->_new._reent._wcsrtombs_state.__count = 0; \
-    var->_new._reent._wcsrtombs_state.__value.__wch = 0; \
-    var->_new._reent._l64a_buf[0] = '\0'; \
-    var->_new._reent._signal_buf[0] = '\0'; \
-    var->_new._reent._getdate_err = 0; \
-    var->_atexit = _NULL; \
-    var->_atexit0._ind = 0; \
-    var->_atexit0._fns[0] = _NULL; \
-    var->_atexit0._on_exit_args._fntypes = 0; \
-    var->_atexit0._on_exit_args._fnargs[0] = _NULL; \
-    var->_sig_func = _NULL; \
-    var->__sglue._next = _NULL; \
-    var->__sglue._niobs = 0; \
-    var->__sglue._iobs = _NULL; \
-    memset(var->__sf,0,sizeof(var->__sf)); \
-  }
-
-#define _REENT_CHECK_RAND48(ptr)	/* nothing */
-#define _REENT_CHECK_MP(ptr)		/* nothing */
-#define _REENT_CHECK_TM(ptr)		/* nothing */
-#define _REENT_CHECK_ASCTIME_BUF(ptr)	/* nothing */
-#define _REENT_CHECK_EMERGENCY(ptr)	/* nothing */
-#define _REENT_CHECK_MISC(ptr)	        /* nothing */
-#define _REENT_CHECK_SIGNAL_BUF(ptr)	/* nothing */
-
-#define _REENT_SIGNGAM(ptr)	((ptr)->_new._reent._gamma_signgam)
-#define _REENT_RAND_NEXT(ptr)	((ptr)->_new._reent._rand_next)
-#define _REENT_RAND48_SEED(ptr)	((ptr)->_new._reent._r48._seed)
-#define _REENT_RAND48_MULT(ptr)	((ptr)->_new._reent._r48._mult)
-#define _REENT_RAND48_ADD(ptr)	((ptr)->_new._reent._r48._add)
-#define _REENT_MP_RESULT(ptr)	((ptr)->_result)
-#define _REENT_MP_RESULT_K(ptr)	((ptr)->_result_k)
-#define _REENT_MP_P5S(ptr)	((ptr)->_p5s)
-#define _REENT_MP_FREELIST(ptr)	((ptr)->_freelist)
-#define _REENT_ASCTIME_BUF(ptr)	(&(ptr)->_new._reent._asctime_buf)
-#define _REENT_TM(ptr)		(&(ptr)->_new._reent._localtime_buf)
-#define _REENT_EMERGENCY(ptr)	((ptr)->_emergency)
-#define _REENT_STRTOK_LAST(ptr)	((ptr)->_new._reent._strtok_last)
-#define _REENT_MBLEN_STATE(ptr)	((ptr)->_new._reent._mblen_state)
-#define _REENT_MBTOWC_STATE(ptr)((ptr)->_new._reent._mbtowc_state)
-#define _REENT_WCTOMB_STATE(ptr)((ptr)->_new._reent._wctomb_state)
-#define _REENT_MBRLEN_STATE(ptr)((ptr)->_new._reent._mbrlen_state)
-#define _REENT_MBRTOWC_STATE(ptr)((ptr)->_new._reent._mbrtowc_state)
-#define _REENT_MBSRTOWCS_STATE(ptr)((ptr)->_new._reent._mbsrtowcs_state)
-#define _REENT_WCRTOMB_STATE(ptr)((ptr)->_new._reent._wcrtomb_state)
-#define _REENT_WCSRTOMBS_STATE(ptr)((ptr)->_new._reent._wcsrtombs_state)
-#define _REENT_L64A_BUF(ptr)    ((ptr)->_new._reent._l64a_buf)
-#define _REENT_SIGNAL_BUF(ptr)  ((ptr)->_new._reent._signal_buf)
-#define _REENT_GETDATE_ERR_P(ptr) (&((ptr)->_new._reent._getdate_err))
-
-#endif /* !_REENT_SMALL */
-
-#define _NULL 0
-
-/*
- * All references to struct _reent are via this pointer.
- * Internally, newlib routines that need to reference it should use _REENT.
- */
-
-#ifndef __ATTRIBUTE_IMPURE_PTR__
-#define __ATTRIBUTE_IMPURE_PTR__
-#endif
-
-extern struct _reent *_impure_ptr __ATTRIBUTE_IMPURE_PTR__;
-
-void _reclaim_reent _PARAMS ((struct _reent *));
-
-/* #define _REENT_ONLY define this to get only reentrant routines */
-
-#ifndef _REENT_ONLY
-
-#if defined(__DYNAMIC_REENT__) && !defined(__SINGLE_THREAD__)
-  struct _reent * _EXFUN(__getreent, (void));
-# define _REENT (__getreent())
-#else /* __SINGLE_THREAD__ || !__DYNAMIC_REENT__ */
-# define _REENT _impure_ptr
-#endif /* __SINGLE_THREAD__ || !__DYNAMIC_REENT__ */
-
-#endif /* !_REENT_ONLY */
-
-#define _GLOBAL_REENT _impure_ptr
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_REENT_H_ */
diff --git a/newlib/libc/include/sys/resource.h b/newlib/libc/include/sys/resource.h
deleted file mode 100644
index eb827552c..000000000
--- a/newlib/libc/include/sys/resource.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _SYS_RESOURCE_H_
-#define _SYS_RESOURCE_H_
-
-#include <sys/time.h>
-
-#define	RUSAGE_SELF	0		/* calling process */
-#define	RUSAGE_CHILDREN	-1		/* terminated child processes */
-
-struct rusage {
-  	struct timeval ru_utime;	/* user time used */
-	struct timeval ru_stime;	/* system time used */
-};
-
-#endif
-
diff --git a/newlib/libc/include/sys/sched.h b/newlib/libc/include/sys/sched.h
deleted file mode 100644
index 540552199..000000000
--- a/newlib/libc/include/sys/sched.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  Written by Joel Sherrill <joel@OARcorp.com>.
- *
- *  COPYRIGHT (c) 1989-2000.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  Permission to use, copy, modify, and distribute this software for any
- *  purpose without fee is hereby granted, provided that this entire notice
- *  is included in all copies of any software which is or includes a copy
- *  or modification of this software.
- *
- *  THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- *  WARRANTY.  IN PARTICULAR,  THE AUTHOR MAKES NO REPRESENTATION
- *  OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
- *  SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- *  $Id$
- */
-
-
-#ifndef __POSIX_SYS_SCHEDULING_h
-#define __POSIX_SYS_SCHEDULING_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <sys/unistd.h>
-
-#include <sys/types.h>
-#include <sys/time.h>
-
-/* Scheduling Policies, P1003.1b-1993, p. 250
-   NOTE:  SCHED_SPORADIC added by P1003.4b/D8, p. 34.  */
-
-#define SCHED_OTHER    0
-#define SCHED_FIFO     1
-#define SCHED_RR       2
-
-#if defined(_POSIX_SPORADIC_SERVER)
-#define SCHED_SPORADIC 3 
-#endif
-
-/* Scheduling Parameters, P1003.1b-1993, p. 249
-   NOTE:  Fields whose name begins with "ss_" added by P1003.4b/D8, p. 33.  */
-
-struct sched_param {
-  int sched_priority;           /* Process execution scheduling priority */
-
-#if defined(_POSIX_SPORADIC_SERVER)
-  int ss_low_priority;          /* Low scheduling priority for sporadic */
-                                /*   server */
-  struct timespec ss_replenish_period; 
-                                /* Replenishment period for sporadic server */
-  struct timespec ss_initial_budget;   /* Initial budget for sporadic server */
-#endif
-};
-
-#ifdef __cplusplus
-}
-#endif 
-
-#endif
-/* end of include file */
-
diff --git a/newlib/libc/include/sys/signal.h b/newlib/libc/include/sys/signal.h
deleted file mode 100644
index dde3aaa04..000000000
--- a/newlib/libc/include/sys/signal.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/* sys/signal.h */
-
-#ifndef _SYS_SIGNAL_H
-#define _SYS_SIGNAL_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "_ansi.h"
-#include <sys/features.h>
-
-/* #ifndef __STRICT_ANSI__*/
-
-#if defined(_POSIX_THREADS)
-#include <sys/types.h>   /* for pthread data types */
-#endif
-
-typedef unsigned long sigset_t;
-
-#if defined(__rtems__)
-
-#if defined(_POSIX_REALTIME_SIGNALS)
-
-/* sigev_notify values
-   NOTE: P1003.1c/D10, p. 34 adds SIGEV_THREAD.  */
-
-#define SIGEV_NONE   1  /* No asynchronous notification shall be delivered */
-                        /*   when the event of interest occurs. */
-#define SIGEV_SIGNAL 2  /* A queued signal, with an application defined */
-                        /*  value, shall be delivered when the event of */
-                        /*  interest occurs. */
-#define SIGEV_THREAD 3  /* A notification function shall be called to */
-                        /*   perform notification. */
-
-/*  Signal Generation and Delivery, P1003.1b-1993, p. 63
-    NOTE: P1003.1c/D10, p. 34 adds sigev_notify_function and
-          sigev_notify_attributes to the sigevent structure.  */
-
-union sigval {
-  int    sival_int;    /* Integer signal value */
-  void  *sival_ptr;    /* Pointer signal value */
-};
-
-struct sigevent {
-  int              sigev_notify;               /* Notification type */
-  int              sigev_signo;                /* Signal number */
-  union sigval     sigev_value;                /* Signal value */
-
-#if defined(_POSIX_THREADS)
-  void           (*sigev_notify_function)( union sigval );
-                                               /* Notification function */
-  pthread_attr_t  *sigev_notify_attributes;    /* Notification Attributes */
-#endif
-};
-
-/* Signal Actions, P1003.1b-1993, p. 64 */
-/* si_code values, p. 66 */
-
-#define SI_USER    1    /* Sent by a user. kill(), abort(), etc */
-#define SI_QUEUE   2    /* Sent by sigqueue() */
-#define SI_TIMER   3    /* Sent by expiration of a timer_settime() timer */
-#define SI_ASYNCIO 4    /* Indicates completion of asycnhronous IO */
-#define SI_MESGQ   5    /* Indicates arrival of a message at an empty queue */
-
-typedef struct {
-  int          si_signo;    /* Signal number */
-  int          si_code;     /* Cause of the signal */
-  union sigval si_value;    /* Signal value */
-} siginfo_t;
-#endif
-
-/*  3.3.8 Synchronously Accept a Signal, P1003.1b-1993, p. 76 */
-
-#define SA_NOCLDSTOP 1   /* Do not generate SIGCHLD when children stop */
-#define SA_SIGINFO   2   /* Invoke the signal catching function with */
-                         /*   three arguments instead of one. */
-
-/* struct sigaction notes from POSIX:
- *
- *  (1) Routines stored in sa_handler should take a single int as
- *      there argument although the POSIX standard does not require this.
- *  (2) The fields sa_handler and sa_sigaction may overlap, and a conforming
- *      application should not use both simultaneously.
- */
-
-typedef void (*_sig_func_ptr)();
-
-struct sigaction {
-  int         sa_flags;       /* Special flags to affect behavior of signal */
-  sigset_t    sa_mask;        /* Additional set of signals to be blocked */
-                              /*   during execution of signal-catching */
-                              /*   function. */
-  union {
-    _sig_func_ptr _handler;  /* SIG_DFL, SIG_IGN, or pointer to a function */
-#if defined(_POSIX_REALTIME_SIGNALS)
-    void      (*_sigaction)( int, siginfo_t *, void * );
-#endif
-  } _signal_handlers;
-};
-
-#define sa_handler    _signal_handlers._handler
-#if defined(_POSIX_REALTIME_SIGNALS)
-#define sa_sigaction  _signal_handlers._sigaction
-#endif
-
-#else
-
-typedef void (*_sig_func_ptr)(int);
-
-struct sigaction 
-{
-	_sig_func_ptr sa_handler;
-	sigset_t sa_mask;
-	int sa_flags;
-};
-
-#define SA_NOCLDSTOP 1  /* only value supported now for sa_flags */
-
-#ifdef __CYGWIN__
-# define SA_RESTART   0x10000000 /* Restart syscall on signal return.  */
-# define SA_NODEFER   0x40000000 /* Don't automatically block the signal when
-                                    its handler is being executed.  */
-# define SA_RESETHAND 0x80000000 /* Reset to SIG_DFL on entry to handler.  */
-#endif
-
-#endif /* defined(__rtems__) */
-
-#define SIG_SETMASK 0	/* set mask with sigprocmask() */
-#define SIG_BLOCK 1	/* set of signals to block */
-#define SIG_UNBLOCK 2	/* set of signals to, well, unblock */
-
-/* These depend upon the type of sigset_t, which right now 
-   is always a long.. They're in the POSIX namespace, but
-   are not ANSI. */
-#define sigaddset(what,sig) (*(what) |= (1<<(sig)))
-#define sigemptyset(what)   (*(what) = 0)
-
-int _EXFUN(sigprocmask, (int how, const sigset_t *set, sigset_t *oset));
-
-#if defined(_POSIX_THREADS)
-int _EXFUN(pthread_sigmask, (int how, const sigset_t *set, sigset_t *oset));
-#endif
-
-/* protos for functions found in winsup sources for CYGWIN */
-#if defined(__CYGWIN__) || defined(__rtems__)
-#undef sigaddset
-#undef sigemptyset
-/* The first argument to kill should be pid_t.  Right now
-   <sys/types.h> always defines pid_t to be int.  If that ever
-   changes, then we will need to do something else, perhaps along the
-   lines of <machine/types.h>.  */
-int _EXFUN(kill, (int, int));
-int _EXFUN(killpg, (pid_t, int));
-int _EXFUN(sigaction, (int, const struct sigaction *, struct sigaction *));
-int _EXFUN(sigaddset, (sigset_t *, const int));
-int _EXFUN(sigdelset, (sigset_t *, const int));
-int _EXFUN(sigismember, (const sigset_t *, int));
-int _EXFUN(sigfillset, (sigset_t *));
-int _EXFUN(sigemptyset, (sigset_t *));
-int _EXFUN(sigpending, (sigset_t *));
-int _EXFUN(sigsuspend, (const sigset_t *));
-int _EXFUN(sigpause, (int));
-
-#if defined(_POSIX_THREADS)
-#ifdef __CYGWIN__
-#  ifndef _CYGWIN_TYPES_H
-#    error You need the winsup sources or a cygwin installation to compile the cygwin version of newlib.
-#  endif
-#endif
-int _EXFUN(pthread_kill, (pthread_t thread, int sig));
-#endif
-
-#if defined(_POSIX_REALTIME_SIGNALS)
-
-/*  3.3.8 Synchronously Accept a Signal, P1003.1b-1993, p. 76
-    NOTE: P1003.1c/D10, p. 39 adds sigwait().  */
-
-int _EXFUN(sigwaitinfo, (const sigset_t *set, siginfo_t *info));
-int _EXFUN(sigtimedwait,
-  (const sigset_t *set, siginfo_t *info, const struct timespec  *timeout)
-);
-int _EXFUN(sigwait, (const sigset_t *set, int *sig));
-
-/*  3.3.9 Queue a Signal to a Process, P1003.1b-1993, p. 78 */
-int _EXFUN(sigqueue, (pid_t pid, int signo, const union sigval value));
-
-#endif /* defined(_POSIX_REALTIME_SIGNALS) */
-
-#endif /* defined(__CYGWIN__) || defined(__rtems__) */
-
-/* #endif __STRICT_ANSI__ */
-
-#if defined(___AM29K__)
-/* These all need to be defined for ANSI C, but I don't think they are
-   meaningful.  */
-#define SIGABRT 1
-#define SIGFPE 1
-#define SIGILL 1
-#define SIGINT 1
-#define SIGSEGV 1
-#define SIGTERM 1
-/* These need to be defined for POSIX, and some others do too.  */
-#define SIGHUP 1
-#define SIGQUIT 1
-#define NSIG 2
-#elif defined(__GO32__)
-#define SIGINT  1
-#define SIGKILL 2
-#define SIGPIPE 3
-#define SIGFPE  4
-#define SIGHUP  5
-#define SIGTERM 6
-#define SIGSEGV 7
-#define SIGTSTP 8
-#define SIGQUIT 9
-#define SIGTRAP 10
-#define SIGILL  11
-#define SIGEMT  12
-#define SIGALRM 13
-#define SIGBUS  14
-#define SIGLOST 15
-#define SIGSTOP 16
-#define SIGABRT 17
-#define SIGUSR1	18
-#define SIGUSR2	19
-#define NSIG    20
-#elif defined(__CYGWIN__)	/* BSD signals semantics */
-#define	SIGHUP	1	/* hangup */
-#define	SIGINT	2	/* interrupt */
-#define	SIGQUIT	3	/* quit */
-#define	SIGILL	4	/* illegal instruction (not reset when caught) */
-#define	SIGTRAP	5	/* trace trap (not reset when caught) */
-#define	SIGABRT 6	/* used by abort */
-#define	SIGEMT	7	/* EMT instruction */
-#define	SIGFPE	8	/* floating point exception */
-#define	SIGKILL	9	/* kill (cannot be caught or ignored) */
-#define	SIGBUS	10	/* bus error */
-#define	SIGSEGV	11	/* segmentation violation */
-#define	SIGSYS	12	/* bad argument to system call */
-#define	SIGPIPE	13	/* write on a pipe with no one to read it */
-#define	SIGALRM	14	/* alarm clock */
-#define	SIGTERM	15	/* software termination signal from kill */
-#define	SIGURG	16	/* urgent condition on IO channel */
-#define	SIGSTOP	17	/* sendable stop signal not from tty */
-#define	SIGTSTP	18	/* stop signal from tty */
-#define	SIGCONT	19	/* continue a stopped process */
-#define	SIGCHLD	20	/* to parent on child stop or exit */
-#define	SIGCLD	20	/* System V name for SIGCHLD */
-#define	SIGTTIN	21	/* to readers pgrp upon background tty read */
-#define	SIGTTOU	22	/* like TTIN for output if (tp->t_local&LTOSTOP) */
-#define	SIGIO	23	/* input/output possible signal */
-#define	SIGPOLL	SIGIO	/* System V name for SIGIO */
-#define	SIGXCPU	24	/* exceeded CPU time limit */
-#define	SIGXFSZ	25	/* exceeded file size limit */
-#define	SIGVTALRM 26	/* virtual time alarm */
-#define	SIGPROF	27	/* profiling time alarm */
-#define	SIGWINCH 28	/* window changed */
-#define	SIGLOST 29	/* resource lost (eg, record-lock lost) */
-#define	SIGUSR1 30	/* user defined signal 1 */
-#define	SIGUSR2 31	/* user defined signal 2 */
-#define NSIG	32      /* signal 0 implied */
-#else
-#define	SIGHUP	1	/* hangup */
-#define	SIGINT	2	/* interrupt */
-#define	SIGQUIT	3	/* quit */
-#define	SIGILL	4	/* illegal instruction (not reset when caught) */
-#define	SIGTRAP	5	/* trace trap (not reset when caught) */
-#define	SIGIOT	6	/* IOT instruction */
-#define	SIGABRT 6	/* used by abort, replace SIGIOT in the future */
-#define	SIGEMT	7	/* EMT instruction */
-#define	SIGFPE	8	/* floating point exception */
-#define	SIGKILL	9	/* kill (cannot be caught or ignored) */
-#define	SIGBUS	10	/* bus error */
-#define	SIGSEGV	11	/* segmentation violation */
-#define	SIGSYS	12	/* bad argument to system call */
-#define	SIGPIPE	13	/* write on a pipe with no one to read it */
-#define	SIGALRM	14	/* alarm clock */
-#define	SIGTERM	15	/* software termination signal from kill */
-
-#if defined(__rtems__)
-#define SIGUSR1 16  /* reserved as application defined signal 1 */
-#define SIGUSR2 17  /* reserved as application defined signal 2 */
-
-#define __SIGFIRSTNOTRT SIGHUP
-#define __SIGLASTNOTRT  SIGUSR2
-
-/* RTEMS does not support job control, hence no Job Control Signals are
-   defined per P1003.1b-1993, p. 60-61.
-
-   RTEMS does not support memory protection, hence no Memory Protection
-   Signals are defined per P1003.1b-1993, p. 60-61. */
-
-/* Real-Time Signals Range, P1003.1b-1993, p. 61
-   NOTE: By P1003.1b-1993, this should be at least RTSIG_MAX
-         (which is a minimum of 8) signals.
- */
-
-#define SIGRTMIN 18
-#define SIGRTMAX 32
-
-#elif defined(__svr4__)
-/* svr4 specifics. different signals above 15, and sigaction. */
-#define	SIGUSR1	16
-#define SIGUSR2	17
-#define SIGCLD	18
-#define	SIGPWR	19
-#define SIGWINCH 20
-#define	SIGPOLL	22	/* 20 for x.out binaries!!!! */
-#define	SIGSTOP	23	/* sendable stop signal not from tty */
-#define	SIGTSTP	24	/* stop signal from tty */
-#define	SIGCONT	25	/* continue a stopped process */
-#define	SIGTTIN	26	/* to readers pgrp upon background tty read */
-#define	SIGTTOU	27	/* like TTIN for output if (tp->t_local&LTOSTOP) */
-#define NSIG	28	
-#else
-#define	SIGURG	16	/* urgent condition on IO channel */
-#define	SIGSTOP	17	/* sendable stop signal not from tty */
-#define	SIGTSTP	18	/* stop signal from tty */
-#define	SIGCONT	19	/* continue a stopped process */
-#define	SIGCHLD	20	/* to parent on child stop or exit */
-#define	SIGCLD	20	/* System V name for SIGCHLD */
-#define	SIGTTIN	21	/* to readers pgrp upon background tty read */
-#define	SIGTTOU	22	/* like TTIN for output if (tp->t_local&LTOSTOP) */
-#define	SIGIO	23	/* input/output possible signal */
-#define	SIGPOLL	SIGIO	/* System V name for SIGIO */
-#define	SIGXCPU	24	/* exceeded CPU time limit */
-#define	SIGXFSZ	25	/* exceeded file size limit */
-#define	SIGVTALRM 26	/* virtual time alarm */
-#define	SIGPROF	27	/* profiling time alarm */
-#define	SIGWINCH 28	/* window changed */
-#define	SIGLOST 29	/* resource lost (eg, record-lock lost) */
-#define	SIGUSR1 30	/* user defined signal 1 */
-#define	SIGUSR2 31	/* user defined signal 2 */
-#define NSIG	32      /* signal 0 implied */
-#endif
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_SIGNAL_H */
diff --git a/newlib/libc/include/sys/stat-dj.h b/newlib/libc/include/sys/stat-dj.h
deleted file mode 100644
index 5ecc84eff..000000000
--- a/newlib/libc/include/sys/stat-dj.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* This is file STAT.H */
-/*
- * Copyright (C) 1991 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _STAT_H_
-#define _STAT_H_
-
-struct	stat {
-	short st_dev;
-	short st_ino;
-	unsigned short st_mode;
-	short st_nlink;
-	short st_uid;
-	short st_gid;
-	short st_rdev;
-	short st_align_for_word32;
-	long  st_size;
-	long  st_atime;
-	long  st_mtime;
-	long  st_ctime;
-	long  st_blksize;
-};
-
-#define S_IFMT	0xF000	/* file type mask */
-#define S_IFDIR	0x4000	/* directory */
-#define S_IFIFO	0x1000	/* FIFO special */
-#define S_IFCHR	0x2000	/* character special */
-#define S_IFBLK	0x3000	/* block special */
-#define S_IFREG	0x8000	/* or just 0x0000, regular */
-#define S_IREAD	0x0100	/* owner may read */
-#define S_IWRITE 0x0080	/* owner may write */
-#define S_IEXEC	0x0040	/* owner may execute <directory search> */
-
-#define	S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
-#define	S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
-#define	S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
-#define	S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
-#define	S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-int stat(const char *, struct stat *);
-int fstat(int, struct stat *);
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/newlib/libc/include/sys/stat.h b/newlib/libc/include/sys/stat.h
deleted file mode 100644
index 4749506c6..000000000
--- a/newlib/libc/include/sys/stat.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef	_SYS_STAT_H
-#define	_SYS_STAT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-#include <time.h>
-#include <sys/types.h>
-
-#ifdef __i386__
-#ifdef __MSDOS__
-#include "stat-dj.h"
-#endif
-#endif
-
-/* dj's stat defines _STAT_H_ */
-#ifndef _STAT_H_
-
-/* It is intended that the layout of this structure not change when the
-   sizes of any of the basic types change (short, int, long) [via a compile
-   time option].  */
-
-#ifdef __CYGWIN__
-#include <cygwin/stat.h>
-#ifdef _COMPILING_NEWLIB
-#define stat64 __stat64
-#endif
-#else
-struct	stat 
-{
-  dev_t		st_dev;
-  ino_t		st_ino;
-  mode_t	st_mode;
-  nlink_t	st_nlink;
-  uid_t		st_uid;
-  gid_t		st_gid;
-  dev_t		st_rdev;
-  off_t		st_size;
-  /* SysV/sco doesn't have the rest... But Solaris, eabi does.  */
-#if defined(__svr4__) && !defined(__PPC__) && !defined(__sun__)
-  time_t	st_atime;
-  time_t	st_mtime;
-  time_t	st_ctime;
-#else
-  time_t	st_atime;
-  long		st_spare1;
-  time_t	st_mtime;
-  long		st_spare2;
-  time_t	st_ctime;
-  long		st_spare3;
-  long		st_blksize;
-  long		st_blocks;
-  long	st_spare4[2];
-#endif
-};
-#endif
-
-#define	_IFMT		0170000	/* type of file */
-#define		_IFDIR	0040000	/* directory */
-#define		_IFCHR	0020000	/* character special */
-#define		_IFBLK	0060000	/* block special */
-#define		_IFREG	0100000	/* regular */
-#define		_IFLNK	0120000	/* symbolic link */
-#define		_IFSOCK	0140000	/* socket */
-#define		_IFIFO	0010000	/* fifo */
-
-#define 	S_BLKSIZE  1024 /* size of a block */
-
-#define	S_ISUID		0004000	/* set user id on execution */
-#define	S_ISGID		0002000	/* set group id on execution */
-#ifndef	_POSIX_SOURCE
-#define	S_ISVTX		0001000	/* save swapped text even after use */
-#define	S_IREAD		0000400	/* read permission, owner */
-#define	S_IWRITE 	0000200	/* write permission, owner */
-#define	S_IEXEC		0000100	/* execute/search permission, owner */
-#define	S_ENFMT 	0002000	/* enforcement-mode locking */
-
-#define	S_IFMT		_IFMT
-#define	S_IFDIR		_IFDIR
-#define	S_IFCHR		_IFCHR
-#define	S_IFBLK		_IFBLK
-#define	S_IFREG		_IFREG
-#define	S_IFLNK		_IFLNK
-#define	S_IFSOCK	_IFSOCK
-#define	S_IFIFO		_IFIFO
-#endif	/* !_POSIX_SOURCE */
-
-#ifdef _WIN32
-/* The Windows header files define _S_ forms of these, so we do too
-   for easier portability.  */
-#define _S_IFMT		_IFMT
-#define _S_IFDIR	_IFDIR
-#define _S_IFCHR	_IFCHR
-#define _S_IFIFO	_IFIFO
-#define _S_IFREG	_IFREG
-#define _S_IREAD	0000400
-#define _S_IWRITE	0000200
-#define _S_IEXEC	0000100
-#endif
-
-#define	S_IRWXU 	(S_IRUSR | S_IWUSR | S_IXUSR)
-#define		S_IRUSR	0000400	/* read permission, owner */
-#define		S_IWUSR	0000200	/* write permission, owner */
-#define		S_IXUSR 0000100/* execute/search permission, owner */
-#define	S_IRWXG		(S_IRGRP | S_IWGRP | S_IXGRP)
-#define		S_IRGRP	0000040	/* read permission, group */
-#define		S_IWGRP	0000020	/* write permission, grougroup */
-#define		S_IXGRP 0000010/* execute/search permission, group */
-#define	S_IRWXO		(S_IROTH | S_IWOTH | S_IXOTH)
-#define		S_IROTH	0000004	/* read permission, other */
-#define		S_IWOTH	0000002	/* write permission, other */
-#define		S_IXOTH 0000001/* execute/search permission, other */
-
-#define	S_ISBLK(m)	(((m)&_IFMT) == _IFBLK)
-#define	S_ISCHR(m)	(((m)&_IFMT) == _IFCHR)
-#define	S_ISDIR(m)	(((m)&_IFMT) == _IFDIR)
-#define	S_ISFIFO(m)	(((m)&_IFMT) == _IFIFO)
-#define	S_ISREG(m)	(((m)&_IFMT) == _IFREG)
-#define	S_ISLNK(m)	(((m)&_IFMT) == _IFLNK)
-#define	S_ISSOCK(m)	(((m)&_IFMT) == _IFSOCK)
-
-
-int	_EXFUN(chmod,( const char *__path, mode_t __mode ));
-int     _EXFUN(fchmod,(int __fd, mode_t __mode));
-int	_EXFUN(fstat,( int __fd, struct stat *__sbuf ));
-int	_EXFUN(mkdir,( const char *_path, mode_t __mode ));
-int	_EXFUN(mkfifo,( const char *__path, mode_t __mode ));
-int	_EXFUN(stat,( const char *__path, struct stat *__sbuf ));
-mode_t	_EXFUN(umask,( mode_t __mask ));
-
-#if defined(__rtems__) || defined(__CYGWIN__) && !defined(__INSIDE_CYGWIN__)
-int	_EXFUN(lstat,( const char *__path, struct stat *__buf ));
-int	_EXFUN(mknod,( const char *__path, mode_t __mode, dev_t __dev ));
-#endif
-
-/* Provide prototypes for most of the _<systemcall> names that are
-   provided in newlib for some compilers.  */
-#ifdef _COMPILING_NEWLIB
-int	_EXFUN(_fstat,( int __fd, struct stat *__sbuf ));
-int	_EXFUN(_stat,( const char *__path, struct stat *__sbuf ));
-#ifdef __LARGE64_FILES
-struct stat64;
-int	_EXFUN(_fstat64,( int __fd, struct stat64 *__sbuf ));
-#endif
-#endif
-
-#endif /* !_STAT_H_ */
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_STAT_H */
diff --git a/newlib/libc/include/sys/stdio.h b/newlib/libc/include/sys/stdio.h
deleted file mode 100644
index 8177322a0..000000000
--- a/newlib/libc/include/sys/stdio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _NEWLIB_STDIO_H
-#define _NEWLIB_STDIO_H
-
-/* Internal locking macros, used to protect stdio functions.  In the
-   general case, expand to nothing. */
-#if !defined(_flockfile)
-#  define _flockfile(fp)
-#endif
-
-#if !defined(_funlockfile)
-#  define _funlockfile(fp)
-#endif
-
-#endif /* _NEWLIB_STDIO_H */
diff --git a/newlib/libc/include/sys/syslimits.h b/newlib/libc/include/sys/syslimits.h
deleted file mode 100644
index ba9dbd667..000000000
--- a/newlib/libc/include/sys/syslimits.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)syslimits.h	8.1 (Berkeley) 6/2/93
- * $FreeBSD: src/sys/sys/syslimits.h,v 1.10 2001/06/18 20:24:54 wollman Exp $
- */
-
-#ifndef _SYS_SYSLIMITS_H_
-#define _SYS_SYSLIMITS_H_
-
-#define	ARG_MAX			65536	/* max bytes for an exec function */
-#ifndef CHILD_MAX
-#define	CHILD_MAX		   40	/* max simultaneous processes */
-#endif
-#define	LINK_MAX		32767	/* max file link count */
-#define	MAX_CANON		  255	/* max bytes in term canon input line */
-#define	MAX_INPUT		  255	/* max bytes in terminal input */
-#define	NAME_MAX		  255	/* max bytes in a file name */
-#define	NGROUPS_MAX		   16	/* max supplemental group id's */
-#ifndef OPEN_MAX
-#define	OPEN_MAX		   64	/* max open files per process */
-#endif
-#define	PATH_MAX		 1024	/* max bytes in pathname */
-#define	PIPE_BUF		  512	/* max bytes for atomic pipe writes */
-#define	IOV_MAX			 1024	/* max elements in i/o vector */
-
-#define	BC_BASE_MAX		   99	/* max ibase/obase values in bc(1) */
-#define	BC_DIM_MAX		 2048	/* max array elements in bc(1) */
-#define	BC_SCALE_MAX		   99	/* max scale value in bc(1) */
-#define	BC_STRING_MAX		 1000	/* max const string length in bc(1) */
-#define	COLL_WEIGHTS_MAX	    0	/* max weights for order keyword */
-#define	EXPR_NEST_MAX		   32	/* max expressions nested in expr(1) */
-#define	LINE_MAX		 2048	/* max bytes in an input line */
-#define	RE_DUP_MAX		  255	/* max RE's in interval notation */
-
-#endif
diff --git a/newlib/libc/include/sys/time.h b/newlib/libc/include/sys/time.h
deleted file mode 100644
index 20f2903c3..000000000
--- a/newlib/libc/include/sys/time.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* time.h -- An implementation of the standard Unix <sys/time.h> file.
-   Written by Geoffrey Noer <noer@cygnus.com>
-   Public domain; no rights reserved. */
-
-#ifndef _SYS_TIME_H_
-#define _SYS_TIME_H_
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef _WINSOCK_H
-struct timeval {
-  long tv_sec;
-  long tv_usec;
-};
-
-struct timezone {
-  int tz_minuteswest;
-  int tz_dsttime;
-};
-
-#ifdef __CYGWIN__
-#include <sys/select.h>
-#endif /* __CYGWIN__ */
-
-#endif /* _WINSOCK_H */
-
-#define ITIMER_REAL     0
-#define ITIMER_VIRTUAL  1
-#define ITIMER_PROF     2
-
-struct  itimerval {
-  struct  timeval it_interval;
-  struct  timeval it_value;
-};
-
-/* BSD time macros used by RTEMS code */
-#if defined (__rtems__) || defined (__CYGWIN__)
-
-/* Convenience macros for operations on timevals.
-   NOTE: `timercmp' does not work for >= or <=.  */
-#define	timerisset(tvp)		((tvp)->tv_sec || (tvp)->tv_usec)
-#define	timerclear(tvp)		((tvp)->tv_sec = (tvp)->tv_usec = 0)
-#define	timercmp(a, b, CMP) 						      \
-  (((a)->tv_sec == (b)->tv_sec) ? 					      \
-   ((a)->tv_usec CMP (b)->tv_usec) : 					      \
-   ((a)->tv_sec CMP (b)->tv_sec))
-#define	timeradd(a, b, result)						      \
-  do {									      \
-    (result)->tv_sec = (a)->tv_sec + (b)->tv_sec;			      \
-    (result)->tv_usec = (a)->tv_usec + (b)->tv_usec;			      \
-    if ((result)->tv_usec >= 1000000)					      \
-      {									      \
-	++(result)->tv_sec;						      \
-	(result)->tv_usec -= 1000000;					      \
-      }									      \
-  } while (0)
-#define	timersub(a, b, result)						      \
-  do {									      \
-    (result)->tv_sec = (a)->tv_sec - (b)->tv_sec;			      \
-    (result)->tv_usec = (a)->tv_usec - (b)->tv_usec;			      \
-    if ((result)->tv_usec < 0) {					      \
-      --(result)->tv_sec;						      \
-      (result)->tv_usec += 1000000;					      \
-    }									      \
-  } while (0)
-#endif /* defined (__rtems__) || defined (__CYGWIN__) */
-
-int _EXFUN(gettimeofday, (struct timeval *__p, struct timezone *__z));
-int _EXFUN(settimeofday, (const struct timeval *, const struct timezone *));
-int _EXFUN(utimes, (const char *__path, struct timeval *__tvp));
-int _EXFUN(getitimer, (int __which, struct itimerval *__value));
-int _EXFUN(setitimer, (int __which, const struct itimerval *__value,
-					struct itimerval *__ovalue));
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_TIME_H_ */
diff --git a/newlib/libc/include/sys/timeb.h b/newlib/libc/include/sys/timeb.h
deleted file mode 100644
index 0a2c3de8b..000000000
--- a/newlib/libc/include/sys/timeb.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* timeb.h -- An implementation of the standard Unix <sys/timeb.h> file.
-   Written by Ian Lance Taylor <ian@cygnus.com>
-   Public domain; no rights reserved.
-
-   <sys/timeb.h> declares the structure used by the ftime function, as
-   well as the ftime function itself.  Newlib does not provide an
-   implementation of ftime.  */
-
-#ifndef _SYS_TIMEB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define _SYS_TIMEB_H
-
-#include <_ansi.h>
-#include <machine/types.h>
-
-#ifndef __time_t_defined
-typedef _TIME_T_ time_t;
-#define __time_t_defined
-#endif
-
-struct timeb
-{
-  time_t time;
-  unsigned short millitm;
-  short timezone;
-  short dstflag;
-};
-
-extern int ftime _PARAMS ((struct timeb *));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ! defined (_SYS_TIMEB_H) */
diff --git a/newlib/libc/include/sys/times.h b/newlib/libc/include/sys/times.h
deleted file mode 100644
index 9375cb19d..000000000
--- a/newlib/libc/include/sys/times.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef	_SYS_TIMES_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define	_SYS_TIMES_H
-
-#include <_ansi.h>
-#include <machine/types.h>
-
-#ifndef __clock_t_defined
-typedef _CLOCK_T_ clock_t;
-#define __clock_t_defined
-#endif
-
-/*  Get Process Times, P1003.1b-1993, p. 92 */
-struct tms {
-	clock_t	tms_utime;		/* user time */
-	clock_t	tms_stime;		/* system time */
-	clock_t	tms_cutime;		/* user time, children */
-	clock_t	tms_cstime;		/* system time, children */
-};
-
-clock_t _EXFUN(times,(struct tms *));
-
-#ifdef __cplusplus
-}
-#endif
-#endif	/* !_SYS_TIMES_H */
diff --git a/newlib/libc/include/sys/types.h b/newlib/libc/include/sys/types.h
deleted file mode 100644
index 238af1f50..000000000
--- a/newlib/libc/include/sys/types.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/* unified sys/types.h: 
-   start with sef's sysvi386 version.
-   merge go32 version -- a few ifdefs.
-   h8300hms, h8300xray, and sysvnecv70 disagree on the following types:
-
-   typedef int gid_t;
-   typedef int uid_t;
-   typedef int dev_t;
-   typedef int ino_t;
-   typedef int mode_t;
-   typedef int caddr_t;
-
-   however, these aren't "reasonable" values, the sysvi386 ones make far 
-   more sense, and should work sufficiently well (in particular, h8300 
-   doesn't have a stat, and the necv70 doesn't matter.) -- eichin
- */
-
-#ifndef _SYS_TYPES_H
-
-#include <_ansi.h>
-
-#ifndef __INTTYPES_DEFINED__
-#define __INTTYPES_DEFINED__
-typedef short int __int16_t;
-typedef unsigned short int __uint16_t;
-
-#if __INT_MAX__ == 32767
-typedef long int __int32_t;
-typedef unsigned long int __uint32_t;
-#else
-typedef int __int32_t;
-typedef unsigned int __uint32_t;
-#endif
-
-#if __LONG_MAX__ > 2147483647 || !defined(__GNUC__)
-typedef long int __int64_t;
-typedef unsigned long int __uint64_t;
-#else
-__extension__ typedef long long __int64_t;
-__extension__ typedef unsigned long long __uint64_t;
-#endif
-#endif /* ! __INTTYPES_DEFINED */
-
-#ifndef __need_inttypes
-
-#define _SYS_TYPES_H
-#include <sys/_types.h>
-
-#ifdef __i386__
-#if defined (GO32) || defined (__MSDOS__)
-#define __MS_types__
-#endif
-#endif
-
-# include <stddef.h>
-# include <machine/types.h>
-
-/* To ensure the stat struct's layout doesn't change when sizeof(int), etc.
-   changes, we assume sizeof short and long never change and have all types
-   used to define struct stat use them and not int where possible.
-   Where not possible, _ST_INTxx are used.  It would be preferable to not have
-   such assumptions, but until the extra fluff is necessary, it's avoided.
-   No 64 bit targets use stat yet.  What to do about them is postponed
-   until necessary.  */
-#ifdef __GNUC__
-#define _ST_INT32 __attribute__ ((__mode__ (__SI__)))
-#else
-#define _ST_INT32
-#endif
-
-# ifndef	_POSIX_SOURCE
-
-#  define	physadr		physadr_t
-#  define	quad		quad_t
-
-#ifndef _BSDTYPES_DEFINED
-/* also defined in mingw/gmon.h and in w32api/winsock[2].h */
-typedef	unsigned char	u_char;
-typedef	unsigned short	u_short;
-typedef	unsigned int	u_int;
-typedef	unsigned long	u_long;
-#define _BSDTYPES_DEFINED
-#endif
-
-typedef	unsigned short	ushort;		/* System V compatibility */
-typedef	unsigned int	uint;		/* System V compatibility */
-# endif	/*!_POSIX_SOURCE */
-
-#ifndef __clock_t_defined
-typedef _CLOCK_T_ clock_t;
-#define __clock_t_defined
-#endif
-
-#ifndef __time_t_defined
-typedef _TIME_T_ time_t;
-#define __time_t_defined
-
-/* Time Value Specification Structures, P1003.1b-1993, p. 261 */
-
-struct timespec {
-  time_t  tv_sec;   /* Seconds */
-  long    tv_nsec;  /* Nanoseconds */
-};
-
-struct itimerspec {
-  struct timespec  it_interval;  /* Timer period */
-  struct timespec  it_value;     /* Timer expiration */
-};
-#endif
-
-typedef	long	daddr_t;
-typedef	char *	caddr_t;
-
-#ifndef __CYGWIN__
-#if defined(__MS_types__) || defined(__rtems__)
-typedef	unsigned long	ino_t;
-#else
-#ifdef __sparc__
-typedef	unsigned long	ino_t;
-#else
-typedef	unsigned short	ino_t;
-#endif
-#endif
-#endif /*__CYGWIN__*/
-
-#ifdef __MS_types__
-typedef unsigned long vm_offset_t;
-typedef unsigned long vm_size_t;
-
-#define __BIT_TYPES_DEFINED__
-
-typedef signed char int8_t;
-typedef unsigned char u_int8_t;
-typedef short int16_t;
-typedef unsigned short u_int16_t;
-typedef int int32_t;
-typedef unsigned int u_int32_t;
-typedef long long int64_t;
-typedef unsigned long long u_int64_t;
-typedef int32_t register_t;
-#endif /* __MS_types__ */
-
-/*
- * All these should be machine specific - right now they are all broken.
- * However, for all of Cygnus' embedded targets, we want them to all be
- * the same.  Otherwise things like sizeof (struct stat) might depend on
- * how the file was compiled (e.g. -mint16 vs -mint32, etc.).
- */
-
-#if defined(__rtems__)
-/* device numbers are 32-bit major and and 32-bit minor */
-typedef unsigned long long dev_t;
-#else
-#ifndef __CYGWIN__
-typedef	short	dev_t;
-#endif
-#endif
-
-#ifndef __CYGWIN__	/* which defines these types in it's own types.h. */
-typedef long		off_t;
-
-typedef	unsigned short	uid_t;
-typedef	unsigned short	gid_t;
-#endif
-
-typedef int pid_t;
-#ifndef __CYGWIN__
-typedef	long key_t;
-#endif
-typedef _ssize_t ssize_t;
-
-#ifndef __CYGWIN__
-#ifdef __MS_types__
-typedef	char *	addr_t;
-typedef int mode_t;
-#else
-#if defined (__sparc__) && !defined (__sparc_v9__)
-#ifdef __svr4__
-typedef unsigned long mode_t;
-#else
-typedef unsigned short mode_t;
-#endif
-#else
-typedef unsigned int mode_t _ST_INT32;
-#endif
-#endif /* ! __MS_types__ */
-#endif /*__CYGWIN__*/
-
-typedef unsigned short nlink_t;
-
-/* We don't define fd_set and friends if we are compiling POSIX
-   source, or if we have included (or may include as indicated
-   by __USE_W32_SOCKETS) the W32api winsock[2].h header which
-   defines Windows versions of them.   Note that a program which
-   includes the W32api winsock[2].h header must know what it is doing;
-   it must not call the cygwin32 select function.
-*/
-# if !(defined (_POSIX_SOURCE) || defined (_WINSOCK_H) || defined (__USE_W32_SOCKETS)) 
-#  define _SYS_TYPES_FD_SET
-#  define	NBBY	8		/* number of bits in a byte */
-/*
- * Select uses bit masks of file descriptors in longs.
- * These macros manipulate such bit fields (the filesystem macros use chars).
- * FD_SETSIZE may be defined by the user, but the default here
- * should be >= NOFILE (param.h).
- */
-#  ifndef	FD_SETSIZE
-#	define	FD_SETSIZE	64
-#  endif
-
-typedef	long	fd_mask;
-#  define	NFDBITS	(sizeof (fd_mask) * NBBY)	/* bits per mask */
-#  ifndef	howmany
-#	define	howmany(x,y)	(((x)+((y)-1))/(y))
-#  endif
-
-/* We use a macro for fd_set so that including Sockets.h afterwards
-   can work.  */
-typedef	struct _types_fd_set {
-	fd_mask	fds_bits[howmany(FD_SETSIZE, NFDBITS)];
-} _types_fd_set;
-
-#define fd_set _types_fd_set
-
-#  define	FD_SET(n, p)	((p)->fds_bits[(n)/NFDBITS] |= (1L << ((n) % NFDBITS)))
-#  define	FD_CLR(n, p)	((p)->fds_bits[(n)/NFDBITS] &= ~(1L << ((n) % NFDBITS)))
-#  define	FD_ISSET(n, p)	((p)->fds_bits[(n)/NFDBITS] & (1L << ((n) % NFDBITS)))
-#  define	FD_ZERO(p)	(__extension__ (void)({ \
-     size_t __i; \
-     char *__tmp = (char *)p; \
-     for (__i = 0; __i < sizeof (*(p)); ++__i) \
-       *__tmp++ = 0; \
-}))
-
-# endif	/* !(defined (_POSIX_SOURCE) || defined (_WINSOCK_H) || defined (__USE_W32_SOCKETS)) */
-
-#undef __MS_types__
-#undef _ST_INT32
-
-/* The following are actually standard POSIX 1003.1b-1993 threads, mutexes,
-   condition variables, and keys.  But since RTEMS is currently the only
-   newlib user of these, the ifdef is just on RTEMS. */
-
-#if defined(__rtems__) || defined(__CYGWIN__)
-
-#ifndef __clockid_t_defined
-typedef _CLOCKID_T_ clockid_t;
-#define __clockid_t_defined
-#endif
-
-#ifndef __timer_t_defined
-typedef _TIMER_T_ timer_t;
-#define __timer_t_defined
-#endif
-
-#if defined(__CYGWIN__) || defined(__rtems__)
-typedef long useconds_t;
-#endif
-
-#include <sys/features.h>
-
-
-/* Cygwin will probably never have full posix compliance due to little things
- * like an inability to set the stackaddress. Cygwin is also using void *  
- * pointers rather than structs to ensure maximum binary compatability with
- * previous releases.
- * This means that we don't use the types defined here, but rather in
- * <cygwin/types.h>
- */
-#if defined(_POSIX_THREADS) && !defined(__CYGWIN__)
-
-#include <sys/sched.h>
-
-/*
- *  2.5 Primitive System Data Types,  P1003.1c/D10, p. 19.
- */
-
-typedef __uint32_t pthread_t;            /* identify a thread */
-
-/* P1003.1c/D10, p. 118-119 */
-#define PTHREAD_SCOPE_PROCESS 0
-#define PTHREAD_SCOPE_SYSTEM  1
-
-/* P1003.1c/D10, p. 111 */
-#define PTHREAD_INHERIT_SCHED  1      /* scheduling policy and associated */
-                                      /*   attributes are inherited from */
-                                      /*   the calling thread. */
-#define PTHREAD_EXPLICIT_SCHED 2      /* set from provided attribute object */
-
-/* P1003.1c/D10, p. 141 */
-#define PTHREAD_CREATE_DETACHED 0
-#define PTHREAD_CREATE_JOINABLE  1
-
-typedef struct {
-  int is_initialized;
-  void *stackaddr;
-  int stacksize;
-  int contentionscope;
-  int inheritsched;
-  int schedpolicy;
-  struct sched_param schedparam;
-
-  /* P1003.4b/D8, p. 54 adds cputime_clock_allowed attribute.  */
-#if defined(_POSIX_THREAD_CPUTIME)
-  int  cputime_clock_allowed;  /* see time.h */
-#endif
-  int  detachstate;
-
-} pthread_attr_t;
-
-#if defined(_POSIX_THREAD_PROCESS_SHARED)
-/* NOTE: P1003.1c/D10, p. 81 defines following values for process_shared.  */
-
-#define PTHREAD_PROCESS_PRIVATE 0 /* visible within only the creating process */
-#define PTHREAD_PROCESS_SHARED  1 /* visible too all processes with access to */
-                                  /*   the memory where the resource is */
-                                  /*   located */
-#endif
-
-#if defined(_POSIX_THREAD_PRIO_PROTECT)
-/* Mutexes */
-
-/* Values for blocking protocol. */
-
-#define PTHREAD_PRIO_NONE    0
-#define PTHREAD_PRIO_INHERIT 1
-#define PTHREAD_PRIO_PROTECT 2
-#endif
-
-typedef __uint32_t pthread_mutex_t;      /* identify a mutex */
-
-typedef struct {
-  int   is_initialized;
-#if defined(_POSIX_THREAD_PROCESS_SHARED)
-  int   process_shared;  /* allow mutex to be shared amongst processes */
-#endif
-#if defined(_POSIX_THREAD_PRIO_PROTECT)
-  int   prio_ceiling;
-  int   protocol;
-#endif
-  int   recursive;
-} pthread_mutexattr_t;
-
-/* Condition Variables */
-
-typedef __uint32_t pthread_cond_t;       /* identify a condition variable */
-
-typedef struct {
-  int   is_initialized;
-#if defined(_POSIX_THREAD_PROCESS_SHARED)
-  int   process_shared;       /* allow this to be shared amongst processes */
-#endif
-} pthread_condattr_t;         /* a condition attribute object */
-
-/* Keys */
-
-typedef __uint32_t pthread_key_t;        /* thread-specific data keys */
-
-typedef struct {
-  int   is_initialized;  /* is this structure initialized? */
-  int   init_executed;   /* has the initialization routine been run? */
-} pthread_once_t;       /* dynamic package initialization */
-#else
-#if defined (__CYGWIN__)
-#include <cygwin/types.h>
-#endif
-#endif /* defined(_POSIX_THREADS) */
-
-#endif  /* defined(__rtems__) */
-
-#endif  /* !__need_inttypes */
-
-#undef __need_inttypes
-
-#endif	/* _SYS_TYPES_H */
diff --git a/newlib/libc/include/sys/unistd.h b/newlib/libc/include/sys/unistd.h
deleted file mode 100644
index e86895928..000000000
--- a/newlib/libc/include/sys/unistd.h
+++ /dev/null
@@ -1,329 +0,0 @@
-#ifndef _SYS_UNISTD_H
-#define _SYS_UNISTD_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/_types.h>
-#define __need_size_t
-#define __need_ptrdiff_t
-#include <stddef.h>
-
-extern char **environ;
-
-void	_EXFUN(_exit, (int __status ) _ATTRIBUTE ((noreturn)));
-
-int	_EXFUN(access,(const char *__path, int __amode ));
-unsigned  _EXFUN(alarm, (unsigned __secs ));
-int     _EXFUN(chdir, (const char *__path ));
-int     _EXFUN(chmod, (const char *__path, mode_t __mode ));
-#if !defined(__INSIDE_CYGWIN__)
-int     _EXFUN(chown, (const char *__path, uid_t __owner, gid_t __group ));
-#endif
-#if defined(__CYGWIN__) || defined(__rtems__)
-int     _EXFUN(chroot, (const char *__path ));
-#endif
-int     _EXFUN(close, (int __fildes ));
-char    _EXFUN(*ctermid, (char *__s ));
-char    _EXFUN(*cuserid, (char *__s ));
-#if defined(__CYGWIN__)
-int	_EXFUN(daemon, (int nochdir, int noclose));
-#endif
-int     _EXFUN(dup, (int __fildes ));
-int     _EXFUN(dup2, (int __fildes, int __fildes2 ));
-#if defined(__CYGWIN__)
-void	_EXFUN(endusershell, (void));
-#endif
-int     _EXFUN(execl, (const char *__path, const char *, ... ));
-int     _EXFUN(execle, (const char *__path, const char *, ... ));
-int     _EXFUN(execlp, (const char *__file, const char *, ... ));
-int     _EXFUN(execv, (const char *__path, char * const __argv[] ));
-int     _EXFUN(execve, (const char *__path, char * const __argv[], char * const __envp[] ));
-int     _EXFUN(execvp, (const char *__file, char * const __argv[] ));
-#if defined(__CYGWIN__) || defined(__rtems__)
-int     _EXFUN(fchdir, (int __fildes));
-#endif
-int     _EXFUN(fchmod, (int __fildes, mode_t __mode ));
-#if !defined(__INSIDE_CYGWIN__)
-int     _EXFUN(fchown, (int __fildes, uid_t __owner, gid_t __group ));
-#endif
-pid_t   _EXFUN(fork, (void ));
-long    _EXFUN(fpathconf, (int __fd, int __name ));
-int     _EXFUN(fsync, (int __fd));
-char    _EXFUN(*getcwd, (char *__buf, size_t __size ));
-#if defined(__CYGWIN__)
-int	_EXFUN(getdomainname ,(char *__name, size_t __len));
-#endif
-#if !defined(__INSIDE_CYGWIN__)
-gid_t   _EXFUN(getegid, (void ));
-uid_t   _EXFUN(geteuid, (void ));
-gid_t   _EXFUN(getgid, (void ));
-#endif
-int     _EXFUN(getgroups, (int __gidsetsize, gid_t __grouplist[] ));
-#if defined(__CYGWIN__)
-long    _EXFUN(gethostid, (void));
-#endif
-char    _EXFUN(*getlogin, (void ));
-#if defined(_POSIX_THREAD_SAFE_FUNCTIONS)
-int _EXFUN(getlogin_r, (char *name, size_t namesize) );
-#endif
-char 	_EXFUN(*getpass, (__const char *__prompt));
-size_t  _EXFUN(getpagesize, (void));
-pid_t   _EXFUN(getpgid, (pid_t));
-pid_t   _EXFUN(getpgrp, (void ));
-pid_t   _EXFUN(getpid, (void ));
-pid_t   _EXFUN(getppid, (void ));
-#ifdef __CYGWIN__
-pid_t   _EXFUN(getsid, (pid_t));
-#endif
-#if !defined(__INSIDE_CYGWIN__)
-uid_t   _EXFUN(getuid, (void ));
-#endif
-#ifdef __CYGWIN__
-char *	_EXFUN(getusershell, (void));
-char    _EXFUN(*getwd, (char *__buf ));
-int	_EXFUN(iruserok, (unsigned long raddr, int superuser, const char *ruser, const char *luser));
-#endif
-int     _EXFUN(isatty, (int __fildes ));
-#if !defined(__INSIDE_CYGWIN__)
-int     _EXFUN(lchown, (const char *__path, uid_t __owner, gid_t __group ));
-#endif
-int     _EXFUN(link, (const char *__path1, const char *__path2 ));
-int	_EXFUN(nice, (int __nice_value ));
-#if !defined(__INSIDE_CYGWIN__)
-off_t   _EXFUN(lseek, (int __fildes, off_t __offset, int __whence ));
-#endif
-long    _EXFUN(pathconf, (const char *__path, int __name ));
-int     _EXFUN(pause, (void ));
-#ifdef __CYGWIN__
-int	_EXFUN(pthread_atfork, (void (*)(void), void (*)(void), void (*)(void)));
-#endif
-int     _EXFUN(pipe, (int __fildes[2] ));
-ssize_t _EXFUN(pread, (int __fd, void *__buf, size_t __nbytes, off_t __offset));
-ssize_t _EXFUN(pwrite, (int __fd, const void *__buf, size_t __nbytes, off_t __offset));
-_READ_WRITE_RETURN_TYPE _EXFUN(read, (int __fd, void *__buf, size_t __nbyte ));
-#if defined(__CYGWIN__)
-int	_EXFUN(rresvport, (int *__alport));
-int	_EXFUN(revoke, (char *__path));
-#endif
-int     _EXFUN(rmdir, (const char *__path ));
-#if defined(__CYGWIN__)
-int	_EXFUN(ruserok, (const char *rhost, int superuser, const char *ruser, const char *luser));
-#endif
-void *  _EXFUN(sbrk,  (ptrdiff_t __incr));
-#if !defined(__INSIDE_CYGWIN__)
-#if defined(__CYGWIN__)
-int     _EXFUN(setegid, (gid_t __gid ));
-int     _EXFUN(seteuid, (uid_t __uid ));
-#endif
-int     _EXFUN(setgid, (gid_t __gid ));
-#endif
-#if defined(__CYGWIN__)
-int	_EXFUN(setgroups, (int ngroups, const gid_t *grouplist ));
-#endif
-int     _EXFUN(setpgid, (pid_t __pid, pid_t __pgid ));
-int     _EXFUN(setpgrp, (void ));
-#if defined(__CYGWIN__) && !defined(__INSIDE_CYGWIN__)
-int	_EXFUN(setregid, (gid_t __rgid, gid_t __egid));
-int	_EXFUN(setreuid, (uid_t __ruid, uid_t __euid));
-#endif
-pid_t   _EXFUN(setsid, (void ));
-#if !defined(__INSIDE_CYGWIN__)
-int     _EXFUN(setuid, (uid_t __uid ));
-#endif
-#if defined(__CYGWIN__)
-void	_EXFUN(setusershell, (void));
-#endif
-unsigned _EXFUN(sleep, (unsigned int __seconds ));
-void    _EXFUN(swab, (const void *, void *, ssize_t));
-long    _EXFUN(sysconf, (int __name ));
-pid_t   _EXFUN(tcgetpgrp, (int __fildes ));
-int     _EXFUN(tcsetpgrp, (int __fildes, pid_t __pgrp_id ));
-char    _EXFUN(*ttyname, (int __fildes ));
-int     _EXFUN(unlink, (const char *__path ));
-int     _EXFUN(vhangup, (void ));
-_READ_WRITE_RETURN_TYPE _EXFUN(write, (int __fd, const void *__buf, size_t __nbyte ));
-
-#ifdef __CYGWIN__
-# define __UNISTD_GETOPT__
-# include <getopt.h>
-# undef __UNISTD_GETOPT__
-#else
-extern char *optarg;			/* getopt(3) external variables */
-extern int optind, opterr, optopt;
-int	 getopt(int, char * const [], const char *);
-extern int optreset;			/* getopt(3) external variable */
-#endif
-
-#ifndef        _POSIX_SOURCE
-pid_t   _EXFUN(vfork, (void ));
-
-extern char *suboptarg;			/* getsubopt(3) external variable */
-int	 getsubopt(char **, char * const *, char **);
-#endif /* _POSIX_SOURCE */
-
-#ifdef _COMPILING_NEWLIB
-/* Provide prototypes for most of the _<systemcall> names that are
-   provided in newlib for some compilers.  */
-int     _EXFUN(_close, (int __fildes ));
-pid_t   _EXFUN(_fork, (void ));
-pid_t   _EXFUN(_getpid, (void ));
-int     _EXFUN(_link, (const char *__path1, const char *__path2 ));
-_off_t   _EXFUN(_lseek, (int __fildes, _off_t __offset, int __whence ));
-#ifdef __LARGE64_FILES
-_off64_t _EXFUN(_lseek64, (int __filedes, _off64_t __offset, int __whence ));
-#endif
-_READ_WRITE_RETURN_TYPE _EXFUN(_read, (int __fd, void *__buf, size_t __nbyte ));
-void *  _EXFUN(_sbrk,  (ptrdiff_t __incr));
-int     _EXFUN(_unlink, (const char *__path ));
-_READ_WRITE_RETURN_TYPE _EXFUN(_write, (int __fd, const void *__buf, size_t __nbyte ));
-int     _EXFUN(_execve, (const char *__path, char * const __argv[], char * const __envp[] ));
-#endif
-
-#if defined(__CYGWIN__) || defined(__rtems__) || defined(__sh__)
-#if !defined(__INSIDE_CYGWIN__)
-int     _EXFUN(ftruncate, (int __fd, off_t __length));
-int     _EXFUN(truncate, (const char *, off_t __length));
-#endif
-#endif
-#if defined(__CYGWIN__) || defined(__rtems__)
-int	_EXFUN(getdtablesize, (void));
-int	_EXFUN(setdtablesize, (int));
-useconds_t _EXFUN(ualarm, (useconds_t __useconds, useconds_t __interval));
-unsigned _EXFUN(usleep, (unsigned int __useconds));
-#if !(defined  (_WINSOCK_H) || defined (__USE_W32_SOCKETS))
-/* winsock[2].h defines as __stdcall, and with int as 2nd arg */
- int	_EXFUN(gethostname, (char *__name, size_t __len));
-#endif
-char *	_EXFUN(mktemp, (char *));
-int     _EXFUN(sync, (void));
-int     _EXFUN(readlink, (const char *__path, char *__buf, int __buflen));
-int     _EXFUN(symlink, (const char *__name1, const char *__name2));
-#endif
-
-#define	F_OK	0
-#define	R_OK	4
-#define	W_OK	2
-#define	X_OK	1
-
-# define	SEEK_SET	0
-# define	SEEK_CUR	1
-# define	SEEK_END	2
-
-#include <sys/features.h>
-
-#define STDIN_FILENO    0       /* standard input file descriptor */
-#define STDOUT_FILENO   1       /* standard output file descriptor */
-#define STDERR_FILENO   2       /* standard error file descriptor */
-
-/*
- *  4.8.1 Get Configurable System Variables, P1003.1b-1993, p. 96
- *
- *  NOTE: Table 4-2, Configurable System Variables, p. 96
- */
-
-#define _SC_ARG_MAX                 0
-#define _SC_CHILD_MAX               1
-#define _SC_CLK_TCK                 2
-#define _SC_NGROUPS_MAX             3
-#define _SC_OPEN_MAX                4
-  /* no _SC_STREAM_MAX */
-#define _SC_JOB_CONTROL             5
-#define _SC_SAVED_IDS               6
-#define _SC_VERSION                 7
-#define _SC_PAGESIZE                8
-/* CYGWIN-specific values .. do not touch */
-#define _SC_NPROCESSORS_CONF        9
-#define _SC_NPROCESSORS_ONLN       10
-#define _SC_PHYS_PAGES             11
-#define _SC_AVPHYS_PAGES           12
-/* end of CYGWIN-specific values */
-#define _SC_MQ_OPEN_MAX            13
-#define _SC_MQ_PRIO_MAX            14
-#define _SC_RTSIG_MAX              15
-#define _SC_SEM_NSEMS_MAX          16
-#define _SC_SEM_VALUE_MAX          17
-#define _SC_SIGQUEUE_MAX           18
-#define _SC_TIMER_MAX              19
-#define _SC_TZNAME_MAX             20
-
-#define _SC_ASYNCHRONOUS_IO        21
-#define _SC_FSYNC                  22
-#define _SC_MAPPED_FILES           23
-#define _SC_MEMLOCK                24
-#define _SC_MEMLOCK_RANGE          25
-#define _SC_MEMORY_PROTECTION      26
-#define _SC_MESSAGE_PASSING        27
-#define _SC_PRIORITIZED_IO         28
-#define _SC_REALTIME_SIGNALS       29
-#define _SC_SEMAPHORES             30
-#define _SC_SHARED_MEMORY_OBJECTS  31
-#define _SC_SYNCHRONIZED_IO        32
-#define _SC_TIMERS                 33
-#define _SC_AIO_LISTIO_MAX         34
-#define _SC_AIO_MAX                35
-#define _SC_AIO_PRIO_DELTA_MAX     36
-#define _SC_DELAYTIMER_MAX         37
-
-/*
- *  P1003.1c/D10, p. 52 adds the following.
- */
-
-#define _SC_THREAD_KEYS_MAX              38
-#define _SC_THREAD_STACK_MIN             39
-#define _SC_THREAD_THREADS_MAX           40
-#define _SC_TTY_NAME_MAX                 41
-
-#define _SC_THREADS                      42
-#define _SC_THREAD_ATTR_STACKADDR        43
-#define _SC_THREAD_ATTR_STACKSIZE        44
-#define _SC_THREAD_PRIORITY_SCHEDULING   45
-#define _SC_THREAD_PRIO_INHERIT          46
-/* _SC_THREAD_PRIO_PROTECT was _SC_THREAD_PRIO_CEILING in early drafts */
-#define _SC_THREAD_PRIO_PROTECT          47
-#define _SC_THREAD_PRIO_CEILING          _SC_THREAD_PRIO_PROTECT
-#define _SC_THREAD_PROCESS_SHARED        48
-#define _SC_THREAD_SAFE_FUNCTIONS        49
-#define _SC_GETGR_R_SIZE_MAX             50
-#define _SC_GETPW_R_SIZE_MAX             51
-#define _SC_LOGIN_NAME_MAX               52
-#define _SC_THREAD_DESTRUCTOR_ITERATIONS 53
-
-#if !defined(__CYGWIN__) && !defined(__rtems__)
-#define _SC_STREAM_MAX			100
-#define _SC_PRIORITY_SCHEDULING		101
-#endif
-  
-# define	_PC_LINK_MAX	        0
-# define	_PC_MAX_CANON	        1
-# define	_PC_MAX_INPUT	        2
-# define	_PC_NAME_MAX	        3
-# define	_PC_PATH_MAX	        4
-# define	_PC_PIPE_BUF	        5
-# define	_PC_CHOWN_RESTRICTED   	6
-# define	_PC_NO_TRUNC	        7
-# define	_PC_VDISABLE	        8
-# define	_PC_ASYNC_IO            9
-# define	_PC_PRIO_IO            10
-# define	_PC_SYNC_IO            11
-#ifdef __CYGWIN__
-/* Ask for POSIX permission bits support. */
-# define	_PC_POSIX_PERMISSIONS   90
-/* Ask for full POSIX permission support including uid/gid settings. */
-# define	_PC_POSIX_SECURITY     91
-#endif
-
-/* FIXME: This is temporary until winsup gets sorted out.  */
-#ifdef __CYGWIN__
-#define MAXPATHLEN (260 - 1 /* NUL */)
-#else
-# define	MAXPATHLEN	1024
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_UNISTD_H */
diff --git a/newlib/libc/include/sys/utime.h b/newlib/libc/include/sys/utime.h
deleted file mode 100644
index 5e937f103..000000000
--- a/newlib/libc/include/sys/utime.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _SYS_UTIME_H
-#define _SYS_UTIME_H
-
-/* This is a dummy <sys/utime.h> file, not customized for any
-   particular system.  If there is a utime.h in libc/sys/SYSDIR/sys,
-   it will override this one.  */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct utimbuf 
-{
-  time_t actime;
-  time_t modtime; 
-};
-
-#ifdef __cplusplus
-};
-#endif
-
-#endif /* _SYS_UTIME_H */
diff --git a/newlib/libc/include/sys/wait.h b/newlib/libc/include/sys/wait.h
deleted file mode 100644
index 0e4a33945..000000000
--- a/newlib/libc/include/sys/wait.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _SYS_WAIT_H
-#define _SYS_WAIT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <sys/types.h>
-
-#define WNOHANG 1
-#define WUNTRACED 2
-
-/* A status looks like:
-      <2 bytes info> <2 bytes code>
-
-      <code> == 0, child has exited, info is the exit value
-      <code> == 1..7e, child has exited, info is the signal number.
-      <code> == 7f, child has stopped, info was the signal number.
-      <code> == 80, there was a core dump.
-*/
-   
-#define WIFEXITED(w)	(((w) & 0xff) == 0)
-#define WIFSIGNALED(w)	(((w) & 0x7f) > 0 && (((w) & 0x7f) < 0x7f))
-#define WIFSTOPPED(w)	(((w) & 0xff) == 0x7f)
-#define WEXITSTATUS(w)	(((w) >> 8) & 0xff)
-#define WTERMSIG(w)	((w) & 0x7f)
-#define WSTOPSIG	WEXITSTATUS
-
-pid_t wait (int *);
-pid_t waitpid (pid_t, int *, int);
-
-/* Provide prototypes for most of the _<systemcall> names that are
-   provided in newlib for some compilers.  */
-pid_t _wait (int *);
-
-#ifdef __cplusplus
-};
-#endif
-
-#endif
diff --git a/newlib/libc/include/termios.h b/newlib/libc/include/termios.h
deleted file mode 100644
index ee1820ce0..000000000
--- a/newlib/libc/include/termios.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <sys/termios.h>
-#ifdef __cplusplus
-}
-#endif
diff --git a/newlib/libc/include/time.h b/newlib/libc/include/time.h
deleted file mode 100644
index f83c38d05..000000000
--- a/newlib/libc/include/time.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * time.h
- * 
- * Struct and function declarations for dealing with time.
- */
-
-#ifndef _TIME_H_
-#define _TIME_H_
-
-#include "_ansi.h"
-#include <sys/reent.h>
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-/* Get _CLOCKS_PER_SEC_ */
-#include <machine/time.h>
-
-#ifndef _CLOCKS_PER_SEC_
-#define _CLOCKS_PER_SEC_ 1000
-#endif
-
-#define CLOCKS_PER_SEC _CLOCKS_PER_SEC_
-#define CLK_TCK CLOCKS_PER_SEC
-#define __need_size_t
-#include <stddef.h>
-
-#include <sys/types.h>
-
-_BEGIN_STD_C
-
-struct tm
-{
-  int	tm_sec;
-  int	tm_min;
-  int	tm_hour;
-  int	tm_mday;
-  int	tm_mon;
-  int	tm_year;
-  int	tm_wday;
-  int	tm_yday;
-  int	tm_isdst;
-};
-
-clock_t	   _EXFUN(clock,    (void));
-double	   _EXFUN(difftime, (time_t _time2, time_t _time1));
-time_t	   _EXFUN(mktime,   (struct tm *_timeptr));
-time_t	   _EXFUN(time,     (time_t *_timer));
-#ifndef _REENT_ONLY
-char	  *_EXFUN(asctime,  (const struct tm *_tblock));
-char	  *_EXFUN(ctime,    (const time_t *_time));
-struct tm *_EXFUN(gmtime,   (const time_t *_timer));
-struct tm *_EXFUN(localtime,(const time_t *_timer));
-#endif
-size_t	   _EXFUN(strftime, (char *_s, size_t _maxsize, const char *_fmt, const struct tm *_t));
-
-char	  *_EXFUN(asctime_r,	(const struct tm *, char *));
-char	  *_EXFUN(ctime_r,	(const time_t *, char *));
-struct tm *_EXFUN(gmtime_r,	(const time_t *, struct tm *));
-struct tm *_EXFUN(localtime_r,	(const time_t *, struct tm *));
-
-_END_STD_C
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef __STRICT_ANSI__
-char      *_EXFUN(strptime,     (const char *, const char *, struct tm *));
-_VOID      _EXFUN(tzset,	(_VOID));
-_VOID      _EXFUN(_tzset_r,	(struct _reent *));
-
-/* getdate functions */
-
-#ifdef HAVE_GETDATE
-#ifndef _REENT_ONLY
-#define getdate_err (*__getdate_err())
-int *_EXFUN(__getdate_err,(_VOID));
-
-struct tm *	_EXFUN(getdate, (const char *));
-/* getdate_err is set to one of the following values to indicate the error.
-     1  the DATEMSK environment variable is null or undefined,
-     2  the template file cannot be opened for reading,
-     3  failed to get file status information,
-     4  the template file is not a regular file,
-     5  an error is encountered while reading the template file,
-     6  memory allication failed (not enough memory available),
-     7  there is no line in the template that matches the input,
-     8  invalid input specification  */
-#endif /* !_REENT_ONLY */
-
-/* getdate_r returns the error code as above */
-int		_EXFUN(getdate_r, (const char *, struct tm *));
-#endif /* HAVE_GETDATE */
-
-/* defines for the opengroup specifications Derived from Issue 1 of the SVID.  */
-extern __IMPORT time_t _timezone;
-extern __IMPORT int _daylight;
-extern __IMPORT char *_tzname[2];
-
-/* POSIX defines the external tzname being defined in time.h */
-#ifndef tzname
-#define tzname _tzname
-#endif
-
-/* CYGWIN also exposes daylight and timezone in the name space */
-#ifdef __CYGWIN__
-#ifndef daylight
-#define daylight _daylight
-#endif
-#ifdef timezonevar
-#ifndef timezone
-#define timezone ((long int) _timezone)
-#endif
-#else
-char *_EXFUN(timezone, (void));
-#endif
-#endif /* __CYGWIN__ */
-#endif /* !__STRICT_ANSI__ */
-
-#ifdef __cplusplus
-}
-#endif
-
-#include <sys/features.h>
-
-#if defined(_POSIX_TIMERS)
-
-#include <signal.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Clocks, P1003.1b-1993, p. 263 */
-
-int _EXFUN(clock_settime, (clockid_t clock_id, const struct timespec *tp));
-int _EXFUN(clock_gettime, (clockid_t clock_id, struct timespec *tp));
-int _EXFUN(clock_getres,  (clockid_t clock_id, struct timespec *res));
-
-/* Create a Per-Process Timer, P1003.1b-1993, p. 264 */
-
-int _EXFUN(timer_create,
-  (clockid_t clock_id, struct sigevent *evp, timer_t *timerid));
-
-/* Delete a Per_process Timer, P1003.1b-1993, p. 266 */
-
-int _EXFUN(timer_delete, (timer_t timerid));
-
-/* Per-Process Timers, P1003.1b-1993, p. 267 */
-
-int _EXFUN(timer_settime,
-  (timer_t timerid, int flags, const struct itimerspec *value,
-   struct itimerspec *ovalue));
-int _EXFUN(timer_gettime, (timer_t timerid, struct itimerspec *value));
-int _EXFUN(timer_getoverrun, (timer_t timerid));
-
-/* High Resolution Sleep, P1003.1b-1993, p. 269 */
-
-int _EXFUN(nanosleep, (const struct timespec  *rqtp, struct timespec *rmtp));
-
-#ifdef __cplusplus
-}
-#endif
-#else
-#ifdef __CYGWIN__
-#ifdef __cplusplus
-extern "C" {
-#endif
-int _EXFUN(nanosleep, (const struct timespec  *rqtp, struct timespec *rmtp));
-#ifdef __cplusplus
-}
-#endif
-#endif /* __CYGWIN__ */
-#endif /* _POSIX_TIMERS */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* CPU-time Clock Attributes, P1003.4b/D8, p. 54 */
-
-/* values for the clock enable attribute */
-
-#define CLOCK_ENABLED  1  /* clock is enabled, i.e. counting execution time */
-#define CLOCK_DISABLED 0  /* clock is disabled */
-
-/* values for the pthread cputime_clock_allowed attribute */
-
-#define CLOCK_ALLOWED    1 /* If a thread is created with this value a */
-                           /*   CPU-time clock attached to that thread */
-                           /*   shall be accessible. */
-#define CLOCK_DISALLOWED 0 /* If a thread is created with this value, the */
-                           /*   thread shall not have a CPU-time clock */
-                           /*   accessible. */
-
-/* Manifest Constants, P1003.1b-1993, p. 262 */
-
-#define CLOCK_REALTIME (clockid_t)1
-
-/* Flag indicating time is "absolute" with respect to the clock
-   associated with a time.  */
-
-#define TIMER_ABSTIME  4
-
-/* Manifest Constants, P1003.4b/D8, p. 55 */
-
-#if defined(_POSIX_CPUTIME)
-
-/* When used in a clock or timer function call, this is interpreted as
-   the identifier of the CPU_time clock associated with the PROCESS
-   making the function call.  */
-
-#define CLOCK_PROCESS_CPUTIME (clockid_t)2
-
-#endif
-
-#if defined(_POSIX_THREAD_CPUTIME)
-
-/*  When used in a clock or timer function call, this is interpreted as
-    the identifier of the CPU_time clock associated with the THREAD
-    making the function call.  */
-
-#define CLOCK_THREAD_CPUTIME (clockid_t)3
-
-#endif
-
-#if defined(_POSIX_CPUTIME)
-
-/* Accessing a Process CPU-time CLock, P1003.4b/D8, p. 55 */
-
-int _EXFUN(clock_getcpuclockid, (pid_t pid, clockid_t *clock_id));
-
-#endif /* _POSIX_CPUTIME */
-
-#if defined(_POSIX_CPUTIME) || defined(_POSIX_THREAD_CPUTIME)
-
-/* CPU-time Clock Attribute Access, P1003.4b/D8, p. 56 */
-
-int _EXFUN(clock_setenable_attr, (clockid_t clock_id, int attr));
-int _EXFUN(clock_getenable_attr, (clockid_t clock_id, int *attr));
-
-#endif /* _POSIX_CPUTIME or _POSIX_THREAD_CPUTIME */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TIME_H_ */
-
diff --git a/newlib/libc/include/unctrl.h b/newlib/libc/include/unctrl.h
deleted file mode 100644
index 004075232..000000000
--- a/newlib/libc/include/unctrl.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* From curses.h.  */
-/*
- * Copyright (c) 1981, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _UNCTRL_H_
-#define _UNCTRL_H_
-
-#include <_ansi.h>
-
-#define unctrl(c)		__unctrl[(c) & 0xff]
-#define unctrllen(ch)		__unctrllen[(ch) & 0xff]
-
-extern __IMPORT _CONST char * _CONST __unctrl[256];	/* Control strings. */
-extern __IMPORT _CONST char __unctrllen[256];	/* Control strings length. */
-
-#endif /* _UNCTRL_H_ */
diff --git a/newlib/libc/include/unistd.h b/newlib/libc/include/unistd.h
deleted file mode 100644
index f9fca8476..000000000
--- a/newlib/libc/include/unistd.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _UNISTD_H_
-#define _UNISTD_H_
-
-# include <sys/unistd.h>
-
-#endif /* _UNISTD_H_ */
diff --git a/newlib/libc/include/utime.h b/newlib/libc/include/utime.h
deleted file mode 100644
index 652891aab..000000000
--- a/newlib/libc/include/utime.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-
-/* The utime function is defined in libc/sys/<arch>/sys if it exists. */
-#include <sys/utime.h>
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/newlib/libc/include/utmp.h b/newlib/libc/include/utmp.h
deleted file mode 100644
index 88cf6f852..000000000
--- a/newlib/libc/include/utmp.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <sys/utmp.h>
-#ifdef __cplusplus
-}
-#endif
-
diff --git a/newlib/libc/include/wchar.h b/newlib/libc/include/wchar.h
deleted file mode 100644
index 9e8953739..000000000
--- a/newlib/libc/include/wchar.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _WCHAR_H_
-#define _WCHAR_H_
-
-#include <_ansi.h>
-
-#define __need_size_t
-#define __need_wchar_t
-#define __need_wint_t
-#include <stddef.h>
-
-/* For _mbstate_t definition. */
-#include <sys/_types.h>
-
-#ifndef NULL
-#define NULL	0
-#endif
-
-#ifndef WEOF
-# define WEOF ((wint_t)-1)
-#endif
-
-#ifndef WCHAR_MIN
-#define WCHAR_MIN 0
-#endif
-
-#ifndef WCHAR_MAX
-#ifdef __WCHAR_MAX__
-#define WCHAR_MAX __WCHAR_MAX__
-#else
-#define WCHAR_MAX 0x7fffffffu
-#endif
-#endif
-
-_BEGIN_STD_C
-
-#ifndef _MBSTATE_T
-#define _MBSTATE_T
-typedef _mbstate_t mbstate_t;
-#endif /* _MBSTATE_T */
-
-wint_t	_EXFUN(btowc, (int));
-int	_EXFUN(wctob, (wint_t));
-size_t	_EXFUN(mbrlen, (const char * , size_t, mbstate_t *));
-size_t	_EXFUN(mbrtowc, (wchar_t * , const char * , size_t, mbstate_t *));
-int	_EXFUN(mbsinit, (const mbstate_t *));
-size_t	_EXFUN(mbsrtowcs, (wchar_t * , const char ** , size_t, mbstate_t *));
-size_t	_EXFUN(wcrtomb, (char * , wchar_t, mbstate_t *));
-size_t	_EXFUN(wcsrtombs, (char * , const wchar_t ** , size_t, mbstate_t *));
-wchar_t	*_EXFUN(wcscat, (wchar_t * , const wchar_t *));
-wchar_t	*_EXFUN(wcschr, (const wchar_t *, wchar_t));
-int	_EXFUN(wcscmp, (const wchar_t *, const wchar_t *));
-int	_EXFUN(wcscoll, (const wchar_t *, const wchar_t *));
-wchar_t	*_EXFUN(wcscpy, (wchar_t * , const wchar_t *));
-size_t	_EXFUN(wcscspn, (const wchar_t *, const wchar_t *));
-size_t	_EXFUN(wcslcat, (wchar_t *, const wchar_t *, size_t));
-size_t	_EXFUN(wcslcpy, (wchar_t *, const wchar_t *, size_t));
-size_t	_EXFUN(wcslen, (const wchar_t *));
-wchar_t	*_EXFUN(wcsncat, (wchar_t * , const wchar_t * , size_t));
-int	_EXFUN(wcsncmp, (const wchar_t *, const wchar_t *, size_t));
-wchar_t	*_EXFUN(wcsncpy, (wchar_t *  , const wchar_t * , size_t));
-size_t	_EXFUN(wcsnlen, (const wchar_t *, size_t));
-wchar_t	*_EXFUN(wcspbrk, (const wchar_t *, const wchar_t *));
-wchar_t	*_EXFUN(wcsrchr, (const wchar_t *, wchar_t));
-size_t	_EXFUN(wcsspn, (const wchar_t *, const wchar_t *));
-wchar_t	*_EXFUN(wcsstr, (const wchar_t *, const wchar_t *));
-int	_EXFUN(wcswidth, (const wchar_t *, size_t));
-int	_EXFUN(wcwidth, (const wchar_t));
-wchar_t	*_EXFUN(wmemchr, (const wchar_t *, wchar_t, size_t));
-int	_EXFUN(wmemcmp, (const wchar_t *, const wchar_t *, size_t));
-wchar_t	*_EXFUN(wmemcpy, (wchar_t * , const wchar_t * , size_t));
-wchar_t	*_EXFUN(wmemmove, (wchar_t *, const wchar_t *, size_t));
-wchar_t	*_EXFUN(wmemset, (wchar_t *, wchar_t, size_t));
-
-_END_STD_C
-
-#endif /* _WCHAR_H_ */
diff --git a/newlib/libc/include/wctype.h b/newlib/libc/include/wctype.h
deleted file mode 100644
index c72c9decf..000000000
--- a/newlib/libc/include/wctype.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _WCTYPE_H_
-#define _WCTYPE_H_
-
-#include <_ansi.h>
-#include <sys/_types.h>
-
-#define __need_wint_t
-#include <stddef.h>
-
-#ifndef WEOF
-# define WEOF ((wint_t)-1)
-#endif
-
-_BEGIN_STD_C
-
-#ifndef _WCTYPE_T
-#define _WCTYPE_T
-typedef int wctype_t;
-#endif
-
-#ifndef _WCTRANS_T
-#define _WCTRANS_T
-typedef int wctrans_t;
-#endif
-
-int	_EXFUN(iswalpha, (wint_t));
-int	_EXFUN(iswalnum, (wint_t));
-int	_EXFUN(iswblank, (wint_t));
-int	_EXFUN(iswcntrl, (wint_t));
-int	_EXFUN(iswctype, (wint_t, wctype_t));
-int	_EXFUN(iswdigit, (wint_t));
-int	_EXFUN(iswgraph, (wint_t));
-int	_EXFUN(iswlower, (wint_t));
-int	_EXFUN(iswprint, (wint_t));
-int	_EXFUN(iswpunct, (wint_t));
-int	_EXFUN(iswspace, (wint_t));
-int	_EXFUN(iswupper, (wint_t));
-int	_EXFUN(iswxdigit, (wint_t));
-wint_t	_EXFUN(towctrans, (wint_t, wctrans_t));
-wint_t	_EXFUN(towupper, (wint_t));
-wint_t	_EXFUN(towlower, (wint_t));
-wctrans_t _EXFUN(wctrans, (const char *));
-wctype_t _EXFUN(wctype, (const char *));
-
-_END_STD_C
-
-#endif /* _WCTYPE_H_ */
diff --git a/newlib/libc/libc.texinfo b/newlib/libc/libc.texinfo
deleted file mode 100644
index b83ba3a64..000000000
--- a/newlib/libc/libc.texinfo
+++ /dev/null
@@ -1,436 +0,0 @@
-\input texinfo.tex
-@setfilename libc.info
-@tex
-% NOTE LOCAL KLUGE TO AVOID TOO MUCH WHITESPACE FROM "makedoc"
-\global\long\def\example{%
-\begingroup
-\let\aboveenvbreak=\par
-\let\afterenvbreak=\par
-\parskip=0pt
-\lisp}
-\global\long\def\Eexample{%
-\Elisp
-\endgroup
-\vskip -\parskip% to cancel out effect of following \par
-}
-% END LOCAL WHITESPACE KLUGE
-@end tex
-@syncodeindex fn cp
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* libc::                        The ANSI C library.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@ifinfo
-This file documents the ANSI C library.
-
-Copyright (C) 1992, 1993, 1994-2002 Red Hat, Inc.
-
-@file{libc} includes software developed by the
-University of California, Berkeley and its contributors.
-
-libc includes software developed by Martin Jackson, Graham Haley
-and Steve Chamberlain of Tadpole Technology and released to Cygnus.
-
-libc uses floating-point conversion software developed at AT&T, which
-includes this copyright information:
-
- The author of this software is David M. Gay.
-
- Copyright (c) 1991 by AT&T.
-
- Permission to use, copy, modify, and distribute this software for any
- purpose without fee is hereby granted, provided that this entire notice
- is included in all copies of any software which is or includes a copy
- or modification of this software and in all copies of the supporting
- documentation for such software.
-
- THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-@iftex
-@c @smallbook
-@c @cropmarks
-@finalout
-@setchapternewpage odd
-@settitle Red Hat newlib C Library, Full
-@titlepage
-@title The Red Hat newlib C Library
-@subtitle Full Configuration
-@sp 1
-@subtitle @code{libc} 1.11.0
-@subtitle July 2002 
-@author {Steve Chamberlain}
-@author {Roland Pesch}
-@author {Red Hat Support}
-@author {Jeff Johnston}
-@page
-
-@tex
-{\parskip=0pt
-sac@@cygnus.com, pesch@@cygnus.com, jjohnstn@redhat.com\hfill {\it The Red Hat newlib C Library}\par
-Copyright \copyright{} 1992, 1993, 1994-2002 Red Hat Inc. 
-}
-\global\parindent=0pt % Steve likes it this way
-@end tex
-
-@file{libc} includes software developed by the
-University of California, Berkeley and its contributors.
-
-@file{libc} includes software developed by Martin Jackson, Graham Haley
-and Steve Chamberlain of Tadpole Technology and released to Cygnus.
-
-@file{libc} uses floating-point conversion software developed at AT&T,
-which includes this copyright information:
-
-@cartouche
-@quotation
-The author of this software is David M. Gay.
-
-Copyright (c) 1991 by AT&T.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose without fee is hereby granted, provided that this entire notice
-is included in all copies of any software which is or includes a copy
-or modification of this software and in all copies of the supporting
-documentation for such software.
-
-THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
-WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
-REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
-OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
-@end quotation
-@end cartouche
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end titlepage
-@end iftex
-
-@ifinfo
-@node Top
-@top The Red Hat newlib C Library
-
-@c The menu contents depend on the configuration, so we include them
-@c as a separate file
-
-@c switch to set SIGNALS on or off, according to whether config picks up
-@c signal subdirectory:
-@include sigset.texi
-@include extra.texi
-@include stdio64.texi
-
-@menu
-* Stdlib::
-* Ctype::
-* Stdio::
-@ifset STDIO64
-* Stdio64::
-@end ifset
-
-* Strings::
-* Wchar strings::
-@ifset SIGNALS
-* Signals::
-@end ifset
-
-* Timefns::
-* Locale::
-* Syscalls::
-
-* Misc::
-* Arglists::
-* Reentrancy::
-* Library Index::
-@end menu
-@end ifinfo
-
-@include targetdep.tex
-
-@node Arglists
-@chapter Variable Argument Lists
-
-The @code{printf} family of functions is defined to accept a variable
-number of arguments, rather than a fixed argument list.  You can define
-your own functions with a variable argument list, by using macro
-definitions from either @file{stdarg.h} (for compatibility with ANSI C)
-or from @file{varargs.h} (for compatibility with a popular convention
-prior to ANSI C).  
-
-@menu
-* Stdarg::
-* Varargs::
-@end menu
-
-@node Stdarg
-@section ANSI-standard macros, @file{stdarg.h}
-
-In ANSI C, a function has a variable number of arguments when its
-parameter list ends in an ellipsis (@code{...}).  The parameter list
-must also include at least one explicitly named argument; that argument
-is used to initialize the variable list data structure.
-
-ANSI C defines three macros (@code{va_start}, @code{va_arg}, and
-@code{va_end}) to operate on variable argument lists.  @file{stdarg.h}
-also defines a special type to represent variable argument lists: this
-type is called @code{va_list}.  
-
-@menu
-* va_start::
-* va_arg::
-* va_end::
-@end menu
-
-@page
-@node va_start
-@subsection Initialize variable argument list
-@findex va_start
-@strong{Synopsis}
-@example
-#include <stdarg.h>
-void va_start(va_list @var{ap}, @var{rightmost});
-@end example
-
-@strong{Description}@*
-Use @code{va_start} to initialize the variable argument list @var{ap},
-so that @code{va_arg} can extract values from it.  @var{rightmost} is
-the name of the last explicit argument in the parameter list (the
-argument immediately preceding the ellipsis @samp{...} that flags
-variable arguments in an ANSI C function header).  You can only use
-@code{va_start} in a function declared using this ellipsis notation
-(not, for example, in one of its subfunctions).
-
-@strong{Returns}@*
-@code{va_start} does not return a result.
-
-@strong{Portability}@*
-ANSI C requires @code{va_start}.
-
-@page
-@node va_arg
-@subsection Extract a value from argument list
-@findex va_arg
-@strong{Synopsis}
-@example
-#include <stdarg.h>
-@var{type} va_arg(va_list @var{ap}, @var{type});
-@end example
-
-@strong{Description}@*
-@code{va_arg} returns the next unprocessed value from a variable
-argument list @var{ap} (which you must previously create with
-@var{va_start}).  Specify the type for the value as the second parameter
-to the macro, @var{type}.
-
-You may pass a @code{va_list} object @var{ap} to a subfunction, and use
-@code{va_arg} from the subfunction rather than from the function
-actually declared with an ellipsis in the header; however, in that case
-you may @emph{only} use @code{va_arg} from the subfunction.  ANSI C does
-not permit extracting successive values from a single variable-argument
-list from different levels of the calling stack.
-
-There is no mechanism for testing whether there is actually a next
-argument available; you might instead pass an argument count (or some
-other data that implies an argument count) as one of the fixed arguments
-in your function call.
-
-@strong{Returns}@*
-@code{va_arg} returns the next argument, an object of type @var{type}.
-
-@strong{Portability}@*
-ANSI C requires @code{va_arg}.
-
-@page
-@node va_end
-@subsection Abandon a variable argument list
-@findex va_end
-@strong{Synopsis}
-@example
-#include <stdarg.h>
-void va_end(va_list @var{ap});
-@end example
-
-@strong{Description}@*
-Use @code{va_end} to declare that your program will not use the variable
-argument list @var{ap} any further.
-
-@strong{Returns}@*
-@code{va_end} does not return a result.
-
-@strong{Portability}@*
-ANSI C requires @code{va_end}.
-
-@node Varargs
-@section Traditional macros, @file{varargs.h}
-
-If your C compiler predates ANSI C, you may still be able to use
-variable argument lists using the macros from the @file{varargs.h}
-header file.  These macros resemble their ANSI counterparts, but have
-important differences in usage.   In particular, since traditional C has
-no declaration mechanism for variable argument lists, two additional
-macros are provided simply for the purpose of defining functions with
-variable argument lists.  
-
-As with @file{stdarg.h}, the type @code{va_list} is used to hold a data
-structure representing a variable argument list.
-
-@menu
-* va_alist::
-* va_start-trad::
-* va_arg-trad::
-* va_end-trad::
-@end menu
-
-@page
-@node va_alist
-@subsection Declare variable arguments
-@findex va_alist
-@findex va_dcl
-@strong{Synopsis}
-@example
-#include <varargs.h>
-@var{function}(va_alist)
-va_dcl
-@end example
-
-@strong{Description}@*
-To use the @file{varargs.h} version of variable argument lists, you must
-declare your function with a call to the macro @code{va_alist} as its
-argument list, and use @code{va_dcl} as the declaration.  @emph{Do not
-use a semicolon after @code{va_dcl}.}  
-
-@strong{Returns}@*
-These macros cannot be used in a context where a return is syntactically
-possible. 
-
-@strong{Portability}@*
-@var{va_alist} and @var{va_dcl} were the most widespread method of
-declaring variable argument lists prior to ANSI C.
-
-@page
-@node va_start-trad
-@subsection Initialize variable argument list
-@findex va_start
-@strong{Synopsis}
-@example
-#include <varargs.h>
-va_list @var{ap};
-va_start(@var{ap});
-@end example
-
-@strong{Description}@*
-With the @file{varargs.h} macros, use @code{va_start} to initialize a
-data structure @var{ap} to permit manipulating a variable argument list.
-@var{ap} must have the type @var{va_alist}.
-
-@strong{Returns}@*
-@code{va_start} does not return a result.
-
-@strong{Portability}@*
-@code{va_start} is also defined as a macro in ANSI C, but the
-definitions are incompatible; the ANSI version has another parameter
-besides @var{ap}.
-
-@page
-@node va_arg-trad
-@subsection Extract a value from argument list
-@findex va_arg
-@strong{Synopsis}
-@example
-#include <varargs.h>
-@var{type} va_arg(va_list @var{ap}, @var{type});
-@end example
-
-@strong{Description}@*
-@code{va_arg} returns the next unprocessed value from a variable
-argument list @var{ap} (which you must previously create with
-@var{va_start}).  Specify the type for the value as the second parameter
-to the macro, @var{type}.
-
-@strong{Returns}@*
-@code{va_arg} returns the next argument, an object of type @var{type}.
-
-@strong{Portability}@*
-The @code{va_arg} defined in @file{varargs.h} has the same syntax and
-usage as the ANSI C version from @file{stdarg.h}.
-
-@page
-@node va_end-trad
-@subsection Abandon a variable argument list
-@findex va_end
-@strong{Synopsis}
-@example
-#include <varargs.h>
-va_end(va_list @var{ap});
-@end example
-
-@strong{Description}@*
-Use @code{va_end} to declare that your program will not use the variable
-argument list @var{ap} any further.
-
-@strong{Returns}@*
-@code{va_end} does not return a result.
-
-@strong{Portability}@*
-The @code{va_end} defined in @file{varargs.h} has the same syntax and
-usage as the ANSI C version from @file{stdarg.h}.
-
-@node Library Index
-@unnumbered Index
-@printindex cp
-
-@tex
-% I think something like @colophon should be in texinfo.  In the
-% meantime:
-\long\def\colophon{\hbox to0pt{}\vfill
-\centerline{The body of this manual is set in}
-\centerline{\fontname\tenrm,}
-\centerline{with headings in {\bf\fontname\tenbf}}
-\centerline{and examples in {\tt\fontname\tentt}.}
-\centerline{{\it\fontname\tenit\/} and}
-\centerline{{\sl\fontname\tensl\/}}
-\centerline{are used for emphasis.}\vfill}
-\page\colophon
-% Blame: pesch@cygnus.com, 28mar91.
-@end tex
-
-@contents
-@bye
-
-
diff --git a/newlib/libc/locale/Makefile.am b/newlib/libc/locale/Makefile.am
deleted file mode 100644
index bffe9be9b..000000000
--- a/newlib/libc/locale/Makefile.am
+++ /dev/null
@@ -1,56 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = timelocal.h ldpart.h locale.c lnumeric.h lmonetary.h lmessages.h
-
-## The following interfaces are EL/IX level 2
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	fix_grouping.$(oext) \
-	ldpart.$(oext) \
-	lmessages.$(oext) \
-	lnumeric.$(oext) \
-	lmonetary.$(oext) \
-	nl_langinfo.$(oext) \
-	timelocal.$(oext)
-endif
-
-liblocale_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = liblocale.la
-liblocale_la_SOURCES = $(GENERAL_SOURCES)
-liblocale_la_LIBADD = $(LIB_OBJS)
-liblocale_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES = locale.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/locale.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/locale/Makefile.in b/newlib/libc/locale/Makefile.in
deleted file mode 100644
index 8d6d0f61d..000000000
--- a/newlib/libc/locale/Makefile.in
+++ /dev/null
@@ -1,398 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = timelocal.h ldpart.h locale.c lnumeric.h lmonetary.h lmessages.h
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	fix_grouping.$(oext) \
-@ELIX_LEVEL_1_FALSE@	ldpart.$(oext) \
-@ELIX_LEVEL_1_FALSE@	lmessages.$(oext) \
-@ELIX_LEVEL_1_FALSE@	lnumeric.$(oext) \
-@ELIX_LEVEL_1_FALSE@	lmonetary.$(oext) \
-@ELIX_LEVEL_1_FALSE@	nl_langinfo.$(oext) \
-@ELIX_LEVEL_1_FALSE@	timelocal.$(oext)
-
-liblocale_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@liblocale.la
-@USE_LIBTOOL_TRUE@liblocale_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@liblocale_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@liblocale_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = locale.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  locale.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@liblocale_la_OBJECTS =  locale.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(liblocale_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(liblocale_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus locale/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-liblocale.la: $(liblocale_la_OBJECTS) $(liblocale_la_DEPENDENCIES)
-	$(LINK)  $(liblocale_la_LDFLAGS) $(liblocale_la_OBJECTS) $(liblocale_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = locale
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/locale.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/locale/fix_grouping.c b/newlib/libc/locale/fix_grouping.c
deleted file mode 100644
index c44fc331e..000000000
--- a/newlib/libc/locale/fix_grouping.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <ctype.h>
-#include <limits.h>
-#include <stddef.h>
-
-static const char nogrouping[] = { CHAR_MAX, '\0' };
-
-/*
- * "3;3;-1" -> "\003\003\177"
- */
-
-const char *
-__fix_locale_grouping_str(const char *str) {
-
-	char *src, *dst;
-	char n;
-
-	if (str == NULL || *str == '\0') {
-		return nogrouping;
-	}
-
-	for (src = (char*)str, dst = (char*)str; *src != '\0'; src++) {
-
-		/* input string examples: "3;3", "3;2;-1" */
-		if (*src == ';')
-			continue;
-	
-		if (*src == '-' && *(src+1) == '1') {
-			*dst++ = CHAR_MAX;
-			src++;
-			continue;
-		}
-
-		if (!isdigit((unsigned char)*src)) {
-			/* broken grouping string */
-			return nogrouping;
-		}
-
-		/* assume all numbers <= 99 */
-		n = *src - '0';
-		if (isdigit((unsigned char)*(src+1))) {
-			src++;
-			n *= 10;
-			n += *src - '0';
-		}
-
-		*dst = n;
-		/* NOTE: assume all input started with "0" as 'no grouping' */
-		if (*dst == '\0')
-			return (dst == (char*)str) ? nogrouping : str;
-		dst++;
-	}
-	*dst = '\0';
-	return str;
-}
diff --git a/newlib/libc/locale/ldpart.c b/newlib/libc/locale/ldpart.c
deleted file mode 100644
index a284b9db2..000000000
--- a/newlib/libc/locale/ldpart.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/syslimits.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "setlocale.h"
-#include "ldpart.h"
-
-static int split_lines(char *, const char *);
-static void set_from_buf(const char *, int, const char **);
-
-int
-__part_load_locale(const char *name,
-		int *using_locale,
-		char *locale_buf,
-		const char *category_filename,
-		int locale_buf_size_max,
-		int locale_buf_size_min,
-		const char **dst_localebuf) {
-
-	static char		locale_buf_C[] = "C";
-	static int		num_lines;
-
-	int			 fd;
-	char			*lbuf;
-	char			*p;
-	const char 		*plim;
-	char                     filename[PATH_MAX];
-	struct stat		 st;
-	size_t			 namesize;
-	size_t			 bufsize;
-	int                      save_using_locale;
-        char *nptr;
-
-	save_using_locale = *using_locale;
-	*using_locale = 0;
-
-	if (name == NULL)
-		goto no_locale;
-
-	if (!strcmp(name, "C") || !strcmp(name, "POSIX"))
-		return 0;
-
-	/*
-	 * If the locale name is the same as our cache, use the cache.
-	 */
-	lbuf = locale_buf;
-	if (lbuf != NULL && strcmp(name, lbuf) == 0) {
-		set_from_buf(lbuf, num_lines, dst_localebuf);
-		*using_locale = 1;
-		return 0;
-	}
-
-	/*
-	 * Slurp the locale file into the cache.
-	 */
-	namesize = strlen(name) + 1;
-
-	if (!_PathLocale)
-		goto no_locale;
-	/* Range checking not needed, 'name' size is limited */
-	strcpy(filename, _PathLocale);
-	strcat(filename, "/");
-	strcat(filename, name);
-	strcat(filename, "/");
-	strcat(filename, category_filename);
-	fd = open(filename, O_RDONLY);
-	if (fd < 0)
-		goto no_locale;
-#ifdef __USE_INTERNAL_STAT64
-	if (fstat64(fd, &st) != 0)
-#else
-	if (fstat(fd, &st) != 0)
-#endif
-		goto bad_locale;
-	if (st.st_size <= 0)
-		goto bad_locale;
-	bufsize = namesize + st.st_size;
-	locale_buf = NULL;
-
-        if (lbuf == NULL || lbuf == locale_buf_C)
-          {
-            lbuf = malloc(bufsize);
-          }
-        else
-          { 
-            nptr = realloc(lbuf, bufsize);
-            if (!nptr && lbuf)
-              free (lbuf);
-            lbuf = nptr;
-          }
-
-	if (lbuf == NULL)
-		goto bad_locale;
-	(void) strcpy(lbuf, name);
-	p = lbuf + namesize;
-	plim = p + st.st_size;
-	if (read(fd, p, (size_t) st.st_size) != st.st_size)
-		goto bad_lbuf;
-	if (close(fd) != 0)
-		goto bad_lbuf;
-	/*
-	 * Parse the locale file into localebuf.
-	 */
-	if (plim[-1] != '\n')
-		goto bad_lbuf;
-	num_lines = split_lines(p, plim);
-	if (num_lines >= locale_buf_size_max)
-		num_lines = locale_buf_size_max;
-	else if (num_lines >= locale_buf_size_min)
-		num_lines = locale_buf_size_min;
-	else
-		goto reset_locale;
-	set_from_buf(lbuf, num_lines, dst_localebuf);
-	/*
-	 * Record the successful parse in the cache.
-	 */
-	locale_buf = lbuf;
-
-	*using_locale = 1;
-	return 0;
-
-reset_locale:
-	locale_buf = locale_buf_C;
-	save_using_locale = 0;
-bad_lbuf:
-	free(lbuf);
-bad_locale:
-	(void)close(fd);
-no_locale:
-	*using_locale = save_using_locale;
-	return -1;
-}
-
-static int
-split_lines(char *p, const char *plim) {
-
-	int i;
-
-	for (i = 0; p < plim; i++) {
-		p = strchr(p, '\n');
-		*p++ = '\0';
-	}
-	return i;
-}
-
-static void
-set_from_buf(const char *p, int num_lines, const char **dst_localebuf) {
-
-	const char **ap;
-	int i;
-
-	for (ap = dst_localebuf, i = 0; i < num_lines; ++ap, ++i)
-		*ap = p += strlen(p) + 1;
-}
-
diff --git a/newlib/libc/locale/ldpart.h b/newlib/libc/locale/ldpart.h
deleted file mode 100644
index 86031fd33..000000000
--- a/newlib/libc/locale/ldpart.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*-
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/ldpart.h,v 1.4 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _LDPART_H_
-#define	_LDPART_H_
-
-int	__part_load_locale(const char *, int*, char *, const char *,
-		    int, int, const char **);
-
-#endif /* !_LDPART_H_ */
diff --git a/newlib/libc/locale/lmessages.c b/newlib/libc/locale/lmessages.c
deleted file mode 100644
index 9a4bb799a..000000000
--- a/newlib/libc/locale/lmessages.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <stddef.h>
-
-#include "lmessages.h"
-#include "ldpart.h"
-
-#define LCMESSAGES_SIZE_FULL (sizeof(struct lc_messages_T) / sizeof(char *))
-#define LCMESSAGES_SIZE_MIN \
-		(offsetof(struct lc_messages_T, yesstr) / sizeof(char *))
-
-static char empty[] = "";
-
-static const struct lc_messages_T _C_messages_locale = {
-	"^[yY]" ,	/* yesexpr */
-	"^[nN]" ,	/* noexpr */
-	"yes" , 	/* yesstr */
-	"no"		/* nostr */
-};
-
-static struct lc_messages_T _messages_locale;
-static int	_messages_using_locale;
-static char	*_messages_locale_buf;
-
-int
-__messages_load_locale(const char *name) {
-
-	/*
-	 * Propose that we can have incomplete locale file (w/o "{yes,no}str").
-	 * Initialize them before loading.  In case of complete locale, they'll
-	 * be initialized to loaded value, otherwise they'll not be touched.
-	 */
-	_messages_locale.yesstr = empty;
-	_messages_locale.nostr = empty;
-
-	return __part_load_locale(name, &_messages_using_locale,
-		_messages_locale_buf, "LC_MESSAGES",
-		LCMESSAGES_SIZE_FULL, LCMESSAGES_SIZE_MIN,
-		(const char **)&_messages_locale);
-}
-
-struct lc_messages_T *
-__get_current_messages_locale(void) {
-
-	return (_messages_using_locale
-		? &_messages_locale
-		: (struct lc_messages_T *)&_C_messages_locale);
-}
-
-#ifdef LOCALE_DEBUG
-void
-msgdebug() {
-printf(	"yesexpr = %s\n"
-	"noexpr = %s\n"
-	"yesstr = %s\n"
-	"nostr = %s\n",
-	_messages_locale.yesexpr,
-	_messages_locale.noexpr,
-	_messages_locale.yesstr,
-	_messages_locale.nostr
-);
-}
-#endif /* LOCALE_DEBUG */
diff --git a/newlib/libc/locale/lmessages.h b/newlib/libc/locale/lmessages.h
deleted file mode 100644
index ee690ae7c..000000000
--- a/newlib/libc/locale/lmessages.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*-
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/lmessages.h,v 1.3 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _LMESSAGES_H_
-#define	_LMESSAGES_H_
-
-struct	lc_messages_T {
-	const char	*yesexpr;
-	const char	*noexpr;
-	const char	*yesstr;
-	const char	*nostr;
-};
-
-struct lc_messages_T *__get_current_messages_locale(void);
-int	__messages_load_locale(const char *);
-
-#endif /* !_LMESSAGES_H_ */
diff --git a/newlib/libc/locale/lmonetary.c b/newlib/libc/locale/lmonetary.c
deleted file mode 100644
index d31e88ccd..000000000
--- a/newlib/libc/locale/lmonetary.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <limits.h>
-#include <stdlib.h>
-#include "lmonetary.h"
-#include "ldpart.h"
-
-extern int __mlocale_changed;
-extern const char * __fix_locale_grouping_str(const char *);
-
-#define LCMONETARY_SIZE (sizeof(struct lc_monetary_T) / sizeof(char *))
-
-static char	empty[] = "";
-static char	numempty[] = { CHAR_MAX, '\0'};
-
-static const struct lc_monetary_T _C_monetary_locale = {
-	empty,		/* int_curr_symbol */
-	empty,		/* currency_symbol */
-	empty,		/* mon_decimal_point */
-	empty,		/* mon_thousands_sep */
-	numempty,	/* mon_grouping */
-	empty,		/* positive_sign */
-	empty,		/* negative_sign */
-	numempty,	/* int_frac_digits */
-	numempty,	/* frac_digits */
-	numempty,	/* p_cs_precedes */
-	numempty,	/* p_sep_by_space */
-	numempty,	/* n_cs_precedes */
-	numempty,	/* n_sep_by_space */
-	numempty,	/* p_sign_posn */
-	numempty	/* n_sign_posn */
-};
-
-static struct lc_monetary_T _monetary_locale;
-static int	_monetary_using_locale;
-static char	*_monetary_locale_buf;
-
-static char
-cnv(const char *str) {
-	int i = strtol(str, NULL, 10);
-	if (i == -1)
-		i = CHAR_MAX;
-	return (char)i;
-}
-
-int
-__monetary_load_locale(const char *name) {
-
-	int ret;
-	__mlocale_changed = 1;
-	ret = __part_load_locale(name, &_monetary_using_locale,
-		_monetary_locale_buf, "LC_MONETARY",
-		LCMONETARY_SIZE, LCMONETARY_SIZE,
-		(const char **)&_monetary_locale);
-	if (ret == 0 && _monetary_using_locale) {
-		_monetary_locale.mon_grouping =
-		     __fix_locale_grouping_str(_monetary_locale.mon_grouping);
-
-#define M_ASSIGN_CHAR(NAME) (((char *)_monetary_locale.NAME)[0] = \
-			     cnv(_monetary_locale.NAME))
-
-		M_ASSIGN_CHAR(int_frac_digits);
-		M_ASSIGN_CHAR(frac_digits);
-		M_ASSIGN_CHAR(p_cs_precedes);
-		M_ASSIGN_CHAR(p_sep_by_space);
-		M_ASSIGN_CHAR(n_cs_precedes);
-		M_ASSIGN_CHAR(n_sep_by_space);
-		M_ASSIGN_CHAR(p_sign_posn);
-		M_ASSIGN_CHAR(n_sign_posn);
-	}
-	return ret;
-}
-
-struct lc_monetary_T *
-__get_current_monetary_locale(void) {
-
-	return (_monetary_using_locale
-		? &_monetary_locale
-		: (struct lc_monetary_T *)&_C_monetary_locale);
-}
-
-#ifdef LOCALE_DEBUG
-void
-monetdebug() {
-printf(	"int_curr_symbol = %s\n"
-	"currency_symbol = %s\n"
-	"mon_decimal_point = %s\n"
-	"mon_thousands_sep = %s\n"
-	"mon_grouping = %s\n"
-	"positive_sign = %s\n"
-	"negative_sign = %s\n"
-	"int_frac_digits = %d\n"
-	"frac_digits = %d\n"
-	"p_cs_precedes = %d\n"
-	"p_sep_by_space = %d\n"
-	"n_cs_precedes = %d\n"
-	"n_sep_by_space = %d\n"
-	"p_sign_posn = %d\n"
-	"n_sign_posn = %d\n",
-	_monetary_locale.int_curr_symbol,
-	_monetary_locale.currency_symbol,
-	_monetary_locale.mon_decimal_point,
-	_monetary_locale.mon_thousands_sep,
-	_monetary_locale.mon_grouping,
-	_monetary_locale.positive_sign,
-	_monetary_locale.negative_sign,
-	_monetary_locale.int_frac_digits[0],
-	_monetary_locale.frac_digits[0],
-	_monetary_locale.p_cs_precedes[0],
-	_monetary_locale.p_sep_by_space[0],
-	_monetary_locale.n_cs_precedes[0],
-	_monetary_locale.n_sep_by_space[0],
-	_monetary_locale.p_sign_posn[0],
-	_monetary_locale.n_sign_posn[0]
-);
-}
-#endif /* LOCALE_DEBUG */
diff --git a/newlib/libc/locale/lmonetary.h b/newlib/libc/locale/lmonetary.h
deleted file mode 100644
index bbe77db42..000000000
--- a/newlib/libc/locale/lmonetary.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*-
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/lmonetary.h,v 1.3 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _LMONETARY_H_
-#define	_LMONETARY_H_
-
-struct lc_monetary_T {
-	const char	*int_curr_symbol;
-	const char	*currency_symbol;
-	const char	*mon_decimal_point;
-	const char	*mon_thousands_sep;
-	const char	*mon_grouping;
-	const char	*positive_sign;
-	const char	*negative_sign;
-	const char	*int_frac_digits;
-	const char	*frac_digits;
-	const char	*p_cs_precedes;
-	const char	*p_sep_by_space;
-	const char	*n_cs_precedes;
-	const char	*n_sep_by_space;
-	const char	*p_sign_posn;
-	const char	*n_sign_posn;
-};
-
-struct lc_monetary_T *__get_current_monetary_locale(void);
-int	__monetary_load_locale(const char *);
-
-#endif /* !_LMONETARY_H_ */
diff --git a/newlib/libc/locale/lnumeric.c b/newlib/libc/locale/lnumeric.c
deleted file mode 100644
index 90b404ca2..000000000
--- a/newlib/libc/locale/lnumeric.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <limits.h>
-#include "lnumeric.h"
-#include "ldpart.h"
-
-extern int __nlocale_changed;
-extern const char *__fix_locale_grouping_str(const char *);
-
-#define LCNUMERIC_SIZE (sizeof(struct lc_numeric_T) / sizeof(char *))
-
-static char	numempty[] = { CHAR_MAX, '\0' };
-
-static const struct lc_numeric_T _C_numeric_locale = {
-	".",     	/* decimal_point */
-	"",     	/* thousands_sep */
-	numempty	/* grouping */
-};
-
-static struct lc_numeric_T _numeric_locale;
-static int	_numeric_using_locale;
-static char	*_numeric_locale_buf;
-
-int
-__numeric_load_locale(const char *name) {
-
-	int ret;
-
-	__nlocale_changed = 1;
-	ret = __part_load_locale(name, &_numeric_using_locale,
-		_numeric_locale_buf, "LC_NUMERIC",
-		LCNUMERIC_SIZE, LCNUMERIC_SIZE,
-		(const char **)&_numeric_locale);
-	if (ret == 0 && _numeric_using_locale)
-		_numeric_locale.grouping =
-			__fix_locale_grouping_str(_numeric_locale.grouping);
-	return ret;
-}
-
-struct lc_numeric_T *
-__get_current_numeric_locale(void) {
-
-	return (_numeric_using_locale
-		? &_numeric_locale
-		: (struct lc_numeric_T *)&_C_numeric_locale);
-}
-
-#ifdef LOCALE_DEBUG
-void
-numericdebug(void) {
-printf(	"decimal_point = %s\n"
-	"thousands_sep = %s\n"
-	"grouping = %s\n",
-	_numeric_locale.decimal_point,
-	_numeric_locale.thousands_sep,
-	_numeric_locale.grouping
-);
-}
-#endif /* LOCALE_DEBUG */
diff --git a/newlib/libc/locale/lnumeric.h b/newlib/libc/locale/lnumeric.h
deleted file mode 100644
index 9678c1f02..000000000
--- a/newlib/libc/locale/lnumeric.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*-
- * Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/lnumeric.h,v 1.3 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _LNUMERIC_H_
-#define	_LNUMERIC_H_
-
-struct lc_numeric_T {
-	const char	*decimal_point;
-	const char	*thousands_sep;
-	const char	*grouping;
-};
-
-struct lc_numeric_T *__get_current_numeric_locale(void);
-int	__numeric_load_locale(const char *);
-
-#endif /* !_LNUMERIC_H_ */
diff --git a/newlib/libc/locale/locale.c b/newlib/libc/locale/locale.c
deleted file mode 100644
index 66c93d740..000000000
--- a/newlib/libc/locale/locale.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
-FUNCTION
-<<setlocale>>, <<localeconv>>---select or query locale
-
-INDEX
-	setlocale
-INDEX
-	localeconv
-INDEX
-	_setlocale_r
-INDEX
-	_localeconv_r
-
-ANSI_SYNOPSIS
-	#include <locale.h>
-	char *setlocale(int <[category]>, const char *<[locale]>);
-	lconv *localeconv(void);
-
-	char *_setlocale_r(void *<[reent]>,
-                        int <[category]>, const char *<[locale]>);
-	lconv *_localeconv_r(void *<[reent]>);
-
-TRAD_SYNOPSIS
-	#include <locale.h>
-	char *setlocale(<[category]>, <[locale]>)
-	int <[category]>;
-	char *<[locale]>;
-
-	lconv *localeconv();
-
-	char *_setlocale_r(<[reent]>, <[category]>, <[locale]>)
-	char *<[reent]>;
-	int <[category]>;
-	char *<[locale]>;
-
-	lconv *_localeconv_r(<[reent]>);
-	char *<[reent]>;
-
-DESCRIPTION
-<<setlocale>> is the facility defined by ANSI C to condition the
-execution environment for international collating and formatting
-information; <<localeconv>> reports on the settings of the current
-locale.
-
-This is a minimal implementation, supporting only the required <<"C">>
-value for <[locale]>; strings representing other locales are not
-honored unless MB_CAPABLE is defined in which case three new
-extensions are allowed for LC_CTYPE or LC_MESSAGES only: <<"C-JIS">>, 
-<<"C-EUCJP">>, <<"C-SJIS">>, or <<"C-ISO-8859-1">>.  (<<"">> is 
-also accepted; it represents the default locale
-for an implementation, here equivalent to <<"C">>.)
-
-If you use <<NULL>> as the <[locale]> argument, <<setlocale>> returns
-a pointer to the string representing the current locale (always
-<<"C">> in this implementation).  The acceptable values for
-<[category]> are defined in `<<locale.h>>' as macros beginning with
-<<"LC_">>, but this implementation does not check the values you pass
-in the <[category]> argument.
-
-<<localeconv>> returns a pointer to a structure (also defined in
-`<<locale.h>>') describing the locale-specific conventions currently
-in effect.  
-
-<<_localeconv_r>> and <<_setlocale_r>> are reentrant versions of
-<<localeconv>> and <<setlocale>> respectively.  The extra argument
-<[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<setlocale>> returns either a pointer to a string naming the locale
-currently in effect (always <<"C">> for this implementation, or, if
-the locale request cannot be honored, <<NULL>>.
-
-<<localeconv>> returns a pointer to a structure of type <<lconv>>,
-which describes the formatting and collating conventions in effect (in
-this implementation, always those of the C locale).
-
-PORTABILITY
-ANSI C requires <<setlocale>>, but the only locale required across all
-implementations is the C locale.
-
-No supporting OS subroutines are required.
-*/
-
-/*
- * setlocale, localeconv : internationalize your locale.
- *                         (Only "C" or null supported).
- */
-
-#include <locale.h>
-#include <string.h>
-#include <limits.h>
-#include <reent.h>
-
-#ifdef __CYGWIN__
-int __declspec(dllexport) __mb_cur_max = 1;
-#else
-int __mb_cur_max = 1;
-#endif
-
-int __nlocale_changed = 0;
-int __mlocale_changed = 0;
-char *_PathLocale = NULL;
-
-static _CONST struct lconv lconv = 
-{
-  ".", "", "", "", "", "", "", "", "", "",
-  CHAR_MAX, CHAR_MAX, CHAR_MAX, CHAR_MAX,
-  CHAR_MAX, CHAR_MAX, CHAR_MAX, CHAR_MAX,
-};
-
-
-char * _EXFUN(__locale_charset,(_VOID));
-
-static char *charset = "ISO-8859-1";
-char __lc_ctype[12] = "C";
-
-char *
-_DEFUN(_setlocale_r, (p, category, locale),
-       struct _reent *p _AND
-       int category _AND
-       _CONST char *locale)
-{
-#ifndef MB_CAPABLE
-  if (locale)
-    { 
-      if (strcmp (locale, "C") && strcmp (locale, ""))
-        return 0;
-      p->_current_category = category;  
-      p->_current_locale = locale;
-    }
-  return "C";
-#else
-  static char last_lc_ctype[12] = "C";
-  static char lc_messages[12] = "C";
-  static char last_lc_messages[12] = "C";
-
-  if (locale)
-    {
-      char *locale_name = (char *)locale;
-      if (category != LC_CTYPE && category != LC_MESSAGES) 
-        { 
-          if (strcmp (locale, "C") && strcmp (locale, ""))
-            return 0;
-          if (category == LC_ALL)
-            {
-              strcpy (last_lc_ctype, __lc_ctype);
-              strcpy (__lc_ctype, "C");
-              strcpy (last_lc_messages, lc_messages);
-              strcpy (lc_messages, "C");
-              __mb_cur_max = 1;
-            }
-        }
-      else
-        {
-          if (locale[0] == 'C' && locale[1] == '-')
-            {
-              switch (locale[2])
-                {
-                case 'U':
-                  if (strcmp (locale, "C-UTF-8"))
-                    return 0;
-                break;
-                case 'J':
-                  if (strcmp (locale, "C-JIS"))
-                    return 0;
-                break;
-                case 'E':
-                  if (strcmp (locale, "C-EUCJP"))
-                    return 0;
-                break;
-                case 'S':
-                  if (strcmp (locale, "C-SJIS"))
-                    return 0;
-                break;
-                case 'I':
-                  if (strcmp (locale, "C-ISO-8859-1"))
-                    return 0;
-                break;
-                default:
-                  return 0;
-                }
-            }
-          else 
-            {
-              if (strcmp (locale, "C") && strcmp (locale, ""))
-                return 0;
-              locale_name = "C"; /* C is always the default locale */
-            }
-
-          if (category == LC_CTYPE)
-            {
-              strcpy (last_lc_ctype, __lc_ctype);
-              strcpy (__lc_ctype, locale_name);
-
-              __mb_cur_max = 1;
-              if (locale[1] == '-')
-                {
-                  switch (locale[2])
-                    {
-                    case 'U':
-                      __mb_cur_max = 6;
-                    break;
-                    case 'J':
-                      __mb_cur_max = 8;
-                    break;
-                    case 'E':
-                      __mb_cur_max = 2;
-                    break;
-                    case 'S':
-                      __mb_cur_max = 2;
-                    break;
-                    case 'I':
-                    default:
-                      __mb_cur_max = 1;
-                    }
-                }
-            }
-          else
-            {
-              strcpy (last_lc_messages, lc_messages);
-              strcpy (lc_messages, locale_name);
-
-              charset = "ISO-8859-1";
-              if (locale[1] == '-')
-                {
-                  switch (locale[2])
-                    {
-                    case 'U':
-                      charset = "UTF-8";
-                    break;
-                    case 'J':
-                      charset = "JIS";
-                    break;
-                    case 'E':
-                      charset = "EUCJP";
-                    break;
-                    case 'S':
-                      charset = "SJIS";
-                    break;
-                    case 'I':
-                      charset = "ISO-8859-1";
-                    break;
-                    default:
-                      return 0;
-                    }
-                }
-            }
-        }
-      p->_current_category = category;  
-      p->_current_locale = locale;
-
-      if (category == LC_CTYPE)
-        return last_lc_ctype;
-      else if (category == LC_MESSAGES)
-        return last_lc_messages;
-    }
-  else
-    {
-      if (category == LC_CTYPE)
-        return __lc_ctype;
-      else if (category == LC_MESSAGES)
-        return lc_messages;
-    }
- 
-  return "C";
-#endif
-  
-}
-
-char *
-_DEFUN_VOID(__locale_charset)
-{
-  return charset;
-}
-
-struct lconv *
-_DEFUN(_localeconv_r, (data), 
-      struct _reent *data)
-{
-  return (struct lconv *) &lconv;
-}
-
-#ifndef _REENT_ONLY
-
-char *
-_DEFUN(setlocale, (category, locale),
-       int category _AND
-       _CONST char *locale)
-{
-  return _setlocale_r (_REENT, category, locale);
-}
-
-
-struct lconv *
-_DEFUN_VOID(localeconv)
-{
-  return _localeconv_r (_REENT);
-}
-
-#endif
diff --git a/newlib/libc/locale/locale.tex b/newlib/libc/locale/locale.tex
deleted file mode 100644
index 20dc5d2bc..000000000
--- a/newlib/libc/locale/locale.tex
+++ /dev/null
@@ -1,123 +0,0 @@
-@node Locale
-@chapter Locale (@file{locale.h})
-
-A @dfn{locale} is the name for a collection of parameters (affecting
-collating sequences and formatting conventions) that may be different
-depending on location or culture.  The @code{"C"} locale is the only
-one defined in the ANSI C standard.
-
-This is a minimal implementation, supporting only the required @code{"C"}
-value for locale; strings representing other locales are not
-honored.  (@code{""} is also accepted; it represents the default locale
-for an implementation, here equivalent to @code{"C"}.
-
-
-@file{locale.h} defines the structure @code{lconv} to collect the
-information on a locale, with the following fields:
-
-@table @code
-@item char *decimal_point
-The decimal point character used to format ``ordinary'' numbers (all
-numbers except those referring to amounts of money).  @code{"."} in the
-C locale. 
-
-@item char *thousands_sep
-The character (if any) used to separate groups of digits, when
-formatting ordinary numbers.
-@code{""} in the C locale.
-
-@item char *grouping
-Specifications for how many digits to group (if any grouping is done at
-all) when formatting ordinary numbers.  The @emph{numeric value} of each
-character in the string represents the number of digits for the next
-group, and a value of @code{0} (that is, the string's trailing
-@code{NULL}) means to continue grouping digits using the last value
-specified.  Use @code{CHAR_MAX} to indicate that no further grouping is
-desired.  @code{""} in the C locale. 
-
-@item char *int_curr_symbol
-The international currency symbol (first three characters), if any, and
-the character used to separate it from numbers.
-@code{""} in the C locale.
-
-@item char *currency_symbol
-The local currency symbol, if any.
-@code{""} in the C locale.
-
-@item char *mon_decimal_point
-The symbol used to delimit fractions in amounts of money.
-@code{""} in the C locale.
-
-@item char *mon_thousands_sep
-Similar to @code{thousands_sep}, but used for amounts of money.
-@code{""} in the C locale.
-
-@item char *mon_grouping
-Similar to @code{grouping}, but used for amounts of money.
-@code{""} in the C locale.
-
-@item char *positive_sign
-A string to flag positive amounts of money when formatting.
-@code{""} in the C locale.
-
-@item char *negative_sign
-A string to flag negative amounts of money when formatting.
-@code{""} in the C locale.
-
-@item char int_frac_digits
-The number of digits to display when formatting amounts of money to
-international conventions.
-@code{CHAR_MAX} (the largest number representable as a @code{char}) in
-the C locale. 
-
-@item char frac_digits
-The number of digits to display when formatting amounts of money to
-local conventions.
-@code{CHAR_MAX} in the C locale. 
-
-@item char p_cs_precedes
-@code{1} indicates the local currency symbol is used before a
-@emph{positive or zero} formatted amount of money; @code{0} indicates
-the currency symbol is placed after the formatted number.
-@code{CHAR_MAX} in the C locale. 
-
-@item char p_sep_by_space
-@code{1} indicates the local currency symbol must be separated from
-@emph{positive or zero} numbers by a space; @code{0} indicates that it
-is immediately adjacent to numbers.
-@code{CHAR_MAX} in the C locale. 
-
-@item char n_cs_precedes
-@code{1} indicates the local currency symbol is used before a
-@emph{negative} formatted amount of money; @code{0} indicates
-the currency symbol is placed after the formatted number.
-@code{CHAR_MAX} in the C locale. 
-
-@item char n_sep_by_space
-@code{1} indicates the local currency symbol must be separated from
-@emph{negative} numbers by a space; @code{0} indicates that it
-is immediately adjacent to numbers.
-@code{CHAR_MAX} in the C locale. 
-
-@item char p_sign_posn
-Controls the position of the @emph{positive} sign for
-numbers representing money.  @code{0} means parentheses surround the
-number; @code{1} means the sign is placed before both the number and the
-currency symbol; @code{2} means the sign is placed after both the number
-and the currency symbol; @code{3} means the sign is placed just before
-the currency symbol; and @code{4} means the sign is placed just after
-the currency symbol.
-@code{CHAR_MAX} in the C locale. 
-
-@item char n_sign_posn
-Controls the position of the @emph{negative} sign for numbers
-representing money, using the same rules as @code{p_sign_posn}.
-@code{CHAR_MAX} in the C locale. 
-@end table
-
-@menu
-* setlocale::  Select or query locale
-@end menu
-
-@page
-@include locale/locale.def
diff --git a/newlib/libc/locale/nl_langinfo.3 b/newlib/libc/locale/nl_langinfo.3
deleted file mode 100644
index 96819e1c7..000000000
--- a/newlib/libc/locale/nl_langinfo.3
+++ /dev/null
@@ -1,90 +0,0 @@
-.\" Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/lib/libc/locale/nl_langinfo.3,v 1.4 2002/04/13 04:25:56 dd Exp $
-.\"
-.Dd May 3, 2001
-.Dt NL_LANGINFO 3
-.Os
-.Sh NAME
-.Nm nl_langinfo
-.Nd language information
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In langinfo.h
-.Ft char *
-.Fn nl_langinfo "nl_item item"
-.Sh DESCRIPTION
-The
-.Fn nl_langinfo
-function returns a pointer to a string containing information relevant to
-the particular language or cultural area defined in the program's locale.
-The manifest constant names and values of
-.Fa item
-are defined in
-.Aq Pa langinfo.h .
-.Pp
-Calls to
-.Fn setlocale
-with a category corresponding to the category of
-.Fa item ,
-or to the
-category
-.Dv LC_ALL ,
-may overwrite buffer pointed by the return value.
-.Sh EXAMPLES
-For example:
-.Pp
-.Dl nl_langinfo(ABDAY_1)
-.Pp
-would return a pointer to the string
-.Qq Li Dom
-if the identified language was
-Portuguese, and
-.Qq Li Sun
-if the identified language was English.
-.Sh RETURN VALUES
-In a locale where langinfo data is not defined,
-.Fn nl_langinfo
-returns a pointer to the corresponding string in the
-.Tn POSIX
-locale.
-In all locales,
-.Fn nl_langinfo
-returns a pointer to an empty string if
-.Fa item
-contains an invalid setting.
-.Sh SEE ALSO
-.Xr setlocale 3
-.Sh STANDARDS
-The
-.Fn nl_langinfo
-function conforms to
-.St -susv2 .
-.Sh HISTORY
-The
-.Fn nl_langinfo
-function first appeared in
-.Fx 4.6 .
diff --git a/newlib/libc/locale/nl_langinfo.c b/newlib/libc/locale/nl_langinfo.c
deleted file mode 100644
index b2923bd65..000000000
--- a/newlib/libc/locale/nl_langinfo.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*-
- * Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <locale.h>
-#include <langinfo.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "timelocal.h"
-#include "lnumeric.h"
-#include "lmonetary.h"
-#include "lmessages.h"
-
-#define TRANSITION_PERIOD_HACK
-
-#define _REL(BASE) ((int)item-BASE)
-
-char *
-_DEFUN(nl_langinfo, (item), 
-       nl_item item) {
-
-   char *ret, *s, *cs;
-   static char *csym = NULL;
-#ifdef TRANSITION_PERIOD_HACK
-   static char *cset = NULL;
-#endif /* TRANSITION_PERIOD_HACK */
-   char *nptr;
-
-   switch (item) {
-	case CODESET:
-		ret = "";
-		if ((s = setlocale(LC_CTYPE, NULL)) != NULL) {
-			if ((cs = strchr(s, '.')) != NULL) {
-				ret = cs + 1;
-#ifdef TRANSITION_PERIOD_HACK
-				if (strncmp(ret, "ISO_", 4) == 0) {
-					int slen = strlen(ret);
-
-                                        nptr = realloc(cset, slen);
-
-                                        if (!nptr && cset)
-                                          free (cset);
-
-                                        cset = nptr;
-					if (cset != NULL) {
-						strcpy(cset, "ISO");
-						strcat(cset, ret + 4);
-						ret = cset;
-					} else
-						ret = "";
-				} else if (strcmp(ret, "EUC") == 0) {
-					if (strncmp(s, "ja_JP", 5) == 0)
-						ret = "eucJP";
-					else if (strncmp(s, "ko_KR", 5) == 0)
-						ret = "eucKR";
-					else if (strncmp(s, "zh_CN", 5) == 0)
-						ret = "eucCN";
-				} else if (strcmp(ret, "ASCII") == 0)
-					ret = "US-ASCII";
-#endif /* TRANSITION_PERIOD_HACK */
-			} else if (strcmp(s, "C") == 0 ||
-				   strcmp(s, "POSIX") == 0
-#ifdef TRANSITION_PERIOD_HACK
-				   || strstr(s, "ASCII") != NULL
-#endif /* TRANSITION_PERIOD_HACK */
-				  )
-				ret = "US-ASCII";
-		}
-		break;
-	case D_T_FMT:
-		ret = (char *) __get_current_time_locale()->c_fmt;
-		break;
-	case D_FMT:
-		ret = (char *) __get_current_time_locale()->x_fmt;
-		break;
-	case T_FMT:
-		ret = (char *) __get_current_time_locale()->X_fmt;
-		break;
-	case T_FMT_AMPM:
-		ret = (char *) __get_current_time_locale()->ampm_fmt;
-		break;
-	case AM_STR:
-		ret = (char *) __get_current_time_locale()->am;
-		break;
-	case PM_STR:
-		ret = (char *) __get_current_time_locale()->pm;
-		break;
-	case DAY_1: case DAY_2: case DAY_3:
-	case DAY_4: case DAY_5: case DAY_6: case DAY_7:
-		ret = (char*) __get_current_time_locale()->weekday[_REL(DAY_1)];
-		break;
-	case ABDAY_1: case ABDAY_2: case ABDAY_3:
-	case ABDAY_4: case ABDAY_5: case ABDAY_6: case ABDAY_7:
-		ret = (char*) __get_current_time_locale()->wday[_REL(ABDAY_1)];
-		break;
-	case MON_1: case MON_2: case MON_3: case MON_4:
-	case MON_5: case MON_6: case MON_7: case MON_8:
-	case MON_9: case MON_10: case MON_11: case MON_12:
-		ret = (char*) __get_current_time_locale()->month[_REL(MON_1)];
-		break;
-	case ABMON_1: case ABMON_2: case ABMON_3: case ABMON_4:
-	case ABMON_5: case ABMON_6: case ABMON_7: case ABMON_8:
-	case ABMON_9: case ABMON_10: case ABMON_11: case ABMON_12:
-		ret = (char*) __get_current_time_locale()->mon[_REL(ABMON_1)];
-		break;
-	case ERA:
-		/* XXX: need to be implemented  */
-		ret = "";
-		break;
-	case ERA_D_FMT:
-		/* XXX: need to be implemented  */
-		ret = "";
-		break;
-	case ERA_D_T_FMT:
-		/* XXX: need to be implemented  */
-		ret = "";
-		break;
-	case ERA_T_FMT:
-		/* XXX: need to be implemented  */
-		ret = "";
-		break;
-	case ALT_DIGITS:
-		/* XXX: need to be implemented  */
-		ret = "";
-		break;
-	case RADIXCHAR:
-		ret = (char*) __get_current_numeric_locale()->decimal_point;
-		break;
-	case THOUSEP:
-		ret = (char*) __get_current_numeric_locale()->thousands_sep;
-		break;
-	case YESEXPR:
-		ret = (char*) __get_current_messages_locale()->yesexpr;
-		break;
-	case NOEXPR:
-		ret = (char*) __get_current_messages_locale()->noexpr;
-		break;
-	/*
-	 * All items marked with LEGACY are available, but not recomended
-	 * by SUSv2 to be used in portable applications since they're subject
-	 * to remove in future specification editions
-	 */
-	case YESSTR:            /* LEGACY  */
-		ret = (char*) __get_current_messages_locale()->yesstr;
-		break;
-	case NOSTR:             /* LEGACY  */
-		ret = (char*) __get_current_messages_locale()->nostr;
-		break;
-	case CRNCYSTR:
-		ret = "";
-		cs = (char*) __get_current_monetary_locale()->currency_symbol;
-		if (*cs != '\0') {
-			char pos = localeconv()->p_cs_precedes;
-
-			if (pos == localeconv()->n_cs_precedes) {
-				char psn = '\0';
-
-				if (pos == CHAR_MAX) {
-					if (strcmp(cs, __get_current_monetary_locale()->mon_decimal_point) == 0)
-						psn = '.';
-				} else
-					psn = pos ? '-' : '+';
-				if (psn != '\0') {
-					int clen = strlen(cs);
-
-                                        nptr = realloc(csym, clen + 2);
-                                        if (!nptr && csym)
-                                          free (csym);
-
-                                        csym = nptr;
-
-					if (csym != NULL) {
-						*csym = psn;
-						strcpy(csym + 1, cs);
-						ret = csym;
-					}
-				}
-			}
-		}
-		break;
-	case D_MD_ORDER:        /* local extension */
-		ret = (char *) __get_current_time_locale()->md_order;
-		break;
-	default:
-		ret = "";
-   }
-   return (ret);
-}
diff --git a/newlib/libc/locale/setlocale.h b/newlib/libc/locale/setlocale.h
deleted file mode 100644
index 3eb769863..000000000
--- a/newlib/libc/locale/setlocale.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*-
- * Copyright (C) 1997 by Andrey A. Chernov, Moscow, Russia.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/setlocale.h,v 1.4 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _SETLOCALE_H_
-#define	_SETLOCALE_H_
-
-#define ENCODING_LEN 31
-#define CATEGORY_LEN 11
-
-extern char *_PathLocale;
-
-#endif /* !_SETLOCALE_H_ */
diff --git a/newlib/libc/locale/timelocal.c b/newlib/libc/locale/timelocal.c
deleted file mode 100644
index 5b097ad7c..000000000
--- a/newlib/libc/locale/timelocal.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*-
- * Copyright (c) 2001 Alexey Zelkin <phantom@FreeBSD.org>
- * Copyright (c) 1997 FreeBSD Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-
-#include <stddef.h>
-
-#include "ldpart.h"
-#include "timelocal.h"
-
-static struct lc_time_T _time_locale;
-static int _time_using_locale;
-static char *time_locale_buf;
-
-#define LCTIME_SIZE (sizeof(struct lc_time_T) / sizeof(char *))
-
-static const struct lc_time_T	_C_time_locale = {
-	{
-		"Jan", "Feb", "Mar", "Apr", "May", "Jun",
-		"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
-	}, {
-		"January", "February", "March", "April", "May", "June",
-		"July", "August", "September", "October", "November", "December"
-	}, {
-		"Sun", "Mon", "Tue", "Wed",
-		"Thu", "Fri", "Sat"
-	}, {
-		"Sunday", "Monday", "Tuesday", "Wednesday",
-		"Thursday", "Friday", "Saturday"
-	},
-
-	/* X_fmt */
-	"%H:%M:%S",
-
-	/*
-	 * x_fmt
-	 * Since the C language standard calls for
-	 * "date, using locale's date format," anything goes.
-	 * Using just numbers (as here) makes Quakers happier;
-	 * it's also compatible with SVR4.
-	 */
-	"%m/%d/%y",
-
-	/*
-	 * c_fmt
-	 */
-	"%a %b %e %H:%M:%S %Y",
-
-	/* am */
-	"AM",
-
-	/* pm */
-	"PM",
-
-	/* date_fmt */
-	"%a %b %e %H:%M:%S %Z %Y",
-	
-	/* alt_month
-	 * Standalone months forms for %OB
-	 */
-	{
-		"January", "February", "March", "April", "May", "June",
-		"July", "August", "September", "October", "November", "December"
-	},
-
-	/* md_order
-	 * Month / day order in dates
-	 */
-	"md",
-
-	/* ampm_fmt
-	 * To determine 12-hour clock format time (empty, if N/A)
-	 */
-	"%I:%M:%S %p"
-};
-
-struct lc_time_T *
-__get_current_time_locale(void) {
-	return (_time_using_locale
-		? &_time_locale
-		: (struct lc_time_T *)&_C_time_locale);
-}
-
-int
-__time_load_locale(const char *name) {
-
-	int	ret;
-
-	ret = __part_load_locale(name, &_time_using_locale,
-			time_locale_buf, "LC_TIME",
-			LCTIME_SIZE, LCTIME_SIZE,
-			(const char **)&_time_locale);
-
-	return (ret);
-}
diff --git a/newlib/libc/locale/timelocal.h b/newlib/libc/locale/timelocal.h
deleted file mode 100644
index 0b0a59a48..000000000
--- a/newlib/libc/locale/timelocal.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*-
- * Copyright (c) 1997-2002 FreeBSD Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/stdtime/timelocal.h,v 1.11 2002/01/24 15:07:44 phantom Exp $
- */
-
-#ifndef _TIMELOCAL_H_
-#define	_TIMELOCAL_H_
-
-/*
- * Private header file for the strftime and strptime localization
- * stuff.
- */
-struct lc_time_T {
-	const char	*mon[12];
-	const char	*month[12];
-	const char	*wday[7];
-	const char	*weekday[7];
-	const char	*X_fmt;
-	const char	*x_fmt;
-	const char	*c_fmt;
-	const char	*am;
-	const char	*pm;
-	const char	*date_fmt;
-	const char	*alt_month[12];
-	const char	*md_order;
-	const char	*ampm_fmt;
-};
-
-struct lc_time_T *__get_current_time_locale(void);
-int	__time_load_locale(const char *);
-
-#endif /* !_TIMELOCAL_H_ */
diff --git a/newlib/libc/machine/Makefile.am b/newlib/libc/machine/Makefile.am
deleted file mode 100644
index 7e71be193..000000000
--- a/newlib/libc/machine/Makefile.am
+++ /dev/null
@@ -1,26 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-if HAVE_MACHINE_DIR
-MACHLIB = lib.a
-endif
-
-if USE_LIBTOOL
-else
-noinst_LIBRARIES = $(MACHLIB)
-
-lib.a: $(machine_dir)/lib.a
-	rm -f $@
-	ln $(machine_dir)/lib.a $@ >/dev/null 2>/dev/null || \
-	 cp $(machine_dir)/lib.a $@
-endif
-
-$(machine_dir)/lib.a:
-
-doc:
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/Makefile.in b/newlib/libc/machine/Makefile.in
deleted file mode 100644
index b17309088..000000000
--- a/newlib/libc/machine/Makefile.in
+++ /dev/null
@@ -1,448 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-@HAVE_MACHINE_DIR_TRUE@MACHLIB = @HAVE_MACHINE_DIR_TRUE@lib.a
-
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@$(MACHLIB)
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_SOURCES = lib.a.c
-lib_a_OBJECTS =  lib.a.$(OBJEXT)
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = lib.a.c
-OBJECTS = lib.a.$(OBJEXT)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../../acinclude.m4 \
-		../../aclocal.m4 ../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-@USE_LIBTOOL_FALSE@lib.a: $(machine_dir)/lib.a
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	ln $(machine_dir)/lib.a $@ >/dev/null 2>/dev/null || \
-@USE_LIBTOOL_FALSE@	 cp $(machine_dir)/lib.a $@
-
-$(machine_dir)/lib.a:
-
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/a29k/Makefile.am b/newlib/libc/machine/a29k/Makefile.am
deleted file mode 100644
index ec5ca63e2..000000000
--- a/newlib/libc/machine/a29k/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES =
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/a29k/Makefile.in b/newlib/libc/machine/a29k/Makefile.in
deleted file mode 100644
index 4659a3fe9..000000000
--- a/newlib/libc/machine/a29k/Makefile.in
+++ /dev/null
@@ -1,296 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = 
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-tags: TAGS
-TAGS:
-
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/a29k/aclocal.m4 b/newlib/libc/machine/a29k/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/a29k/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/a29k/configure b/newlib/libc/machine/a29k/configure
deleted file mode 100755
index 6afd35773..000000000
--- a/newlib/libc/machine/a29k/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=Makefile.am
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/a29k/configure.in b/newlib/libc/machine/a29k/configure.in
deleted file mode 100644
index 1dffe2144..000000000
--- a/newlib/libc/machine/a29k/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/a29k configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/aclocal.m4 b/newlib/libc/machine/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/machine/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/machine/arm/Makefile.am b/newlib/libc/machine/arm/Makefile.am
deleted file mode 100644
index ec5ca63e2..000000000
--- a/newlib/libc/machine/arm/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES =
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/arm/Makefile.in b/newlib/libc/machine/arm/Makefile.in
deleted file mode 100644
index 4659a3fe9..000000000
--- a/newlib/libc/machine/arm/Makefile.in
+++ /dev/null
@@ -1,296 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = 
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-tags: TAGS
-TAGS:
-
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/arm/aclocal.m4 b/newlib/libc/machine/arm/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/arm/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/arm/configure b/newlib/libc/machine/arm/configure
deleted file mode 100755
index 6afd35773..000000000
--- a/newlib/libc/machine/arm/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=Makefile.am
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/arm/configure.in b/newlib/libc/machine/arm/configure.in
deleted file mode 100644
index a5384f62a..000000000
--- a/newlib/libc/machine/arm/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/arm configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/configure b/newlib/libc/machine/configure
deleted file mode 100755
index 428723874..000000000
--- a/newlib/libc/machine/configure
+++ /dev/null
@@ -1,3431 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=d10v
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../.. $srcdir/../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../.. $srcdir/../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-if test -n "${machine_dir}"; then
-  subdirs="${machine_dir}"
-
-fi
-
-
-
-if test x${machine_dir} != x; then
-  HAVE_MACHINE_DIR_TRUE=
-  HAVE_MACHINE_DIR_FALSE='#'
-else
-  HAVE_MACHINE_DIR_TRUE='#'
-  HAVE_MACHINE_DIR_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@HAVE_MACHINE_DIR_TRUE@%$HAVE_MACHINE_DIR_TRUE%g
-s%@HAVE_MACHINE_DIR_FALSE@%$HAVE_MACHINE_DIR_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${machine_dir}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/machine/configure.in b/newlib/libc/machine/configure.in
deleted file mode 100644
index 5918554f8..000000000
--- a/newlib/libc/machine/configure.in
+++ /dev/null
@@ -1,28 +0,0 @@
-dnl This is the newlib/libc/machine configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(d10v)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../..)
-
-NEWLIB_CONFIGURE(../..)
-
-dnl We have to add the following lines because automake detects the
-dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This must be added after
-dnl the call to NEWLIB_CONFIGURE.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-if test -n "${machine_dir}"; then
-  AC_CONFIG_SUBDIRS(${machine_dir})
-fi
-
-AM_CONDITIONAL(HAVE_MACHINE_DIR, test x${machine_dir} != x)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/d10v/Makefile.am b/newlib/libc/machine/d10v/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/d10v/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/d10v/Makefile.in b/newlib/libc/machine/d10v/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/d10v/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/d10v/aclocal.m4 b/newlib/libc/machine/d10v/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/d10v/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/d10v/configure b/newlib/libc/machine/d10v/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/d10v/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/d10v/configure.in b/newlib/libc/machine/d10v/configure.in
deleted file mode 100644
index fd67e066d..000000000
--- a/newlib/libc/machine/d10v/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/d10v configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/d10v/setjmp.S b/newlib/libc/machine/d10v/setjmp.S
deleted file mode 100644
index 22287dd1e..000000000
--- a/newlib/libc/machine/d10v/setjmp.S
+++ /dev/null
@@ -1,55 +0,0 @@
-; setjmp/longjmp for D10V.  The jmpbuf looks like this:
-;
-; Register		jmpbuf offset
-; R6			0x00
-; R7			0x02
-; R8			0x04
-; R9			0x06
-; R10			0x08
-; R11			0x0a
-; R13 (return address)	0x0c
-; R15 (SP)		0x0E
-
-	.text
-	.globl	setjmp
-	.type	setjmp,@function
-	.stabs	"setjmp.S",100,0,0,setjmp
-	.stabs	"int:t(0,1)=r(0,1);-65536;65535;",128,0,0,0
-	.stabs	"setjmp:F(0,1)",36,0,1,setjmp
-
-setjmp:
-; Address of jmpbuf is passed in R0.  Save the appropriate registers.
-	st2w	r6, @r0+
-	st2w	r8, @r0+
-	st2w	r10, @r0+
-	st	r13, @r0+
-	st	r15, @r0+
-
-; Return 0 to caller
-	ldi	r0, 0
-	jmp	r13
-.Lsetjmp:
-	.size	setjmp,.Lsetjmp-setjmp
-	.stabs	"",36,0,0,.Lsetjmp-setjmp
-
-	.globl	longjmp
-	.type	longjmp,@function
-	.stabs	"longjmp:F(0,1)",36,0,1,longjmp
-longjmp:
-; Address of jmpbuf is in R0.  Restore the registers.
-	ld2w	r6, @r0+
-	ld2w	r8, @r0+
-	ld2w	r10, @r0+
-	ld	r13, @r0+
-	ld	r15, @r0+
-
-; Value to return to caller is in R1.  If caller attemped to return 0,
-; return 1 instead.
-
-	mv	r0, r1
-	cmpeqi	r0, 0
-	exef0t || ldi r0,1
-	jmp	r13
-.Llongjmp:
-	.size	longjmp,.Llongjmp-longjmp
-	.stabs	"",36,0,0,.Llongjmp-longjmp
diff --git a/newlib/libc/machine/d30v/Makefile.am b/newlib/libc/machine/d30v/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/d30v/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/d30v/Makefile.in b/newlib/libc/machine/d30v/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/d30v/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/d30v/aclocal.m4 b/newlib/libc/machine/d30v/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/d30v/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/d30v/configure b/newlib/libc/machine/d30v/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/d30v/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/d30v/configure.in b/newlib/libc/machine/d30v/configure.in
deleted file mode 100644
index 604025ecd..000000000
--- a/newlib/libc/machine/d30v/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/d30v configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/d30v/setjmp.S b/newlib/libc/machine/d30v/setjmp.S
deleted file mode 100644
index c0ca8250b..000000000
--- a/newlib/libc/machine/d30v/setjmp.S
+++ /dev/null
@@ -1,106 +0,0 @@
-; setjmp/longjmp for D30V.
-
-	.text
-	.globl	setjmp
-	.type	setjmp,@function
-	.stabs	"setjmp.S",100,0,0,setjmp
-	.stabs	"int:t(0,1)=r(0,1);-2147483648;2147483647;",128,0,0,0
-	.stabs	"setjmp:F(0,1)",36,0,1,setjmp
-
-setjmp:
-; Address of jmpbuf is passed in R2.  Save the appropriate registers.
-	st2w	r26, @(r2+,r0)
-	st2w	r28, @(r2+,r0)
-	st2w	r30, @(r2+,r0)
-	st2w	r32, @(r2+,r0)
-	st2w	r34, @(r2+,r0)
-	st2w	r36, @(r2+,r0)
-	st2w	r38, @(r2+,r0)
-	st2w	r40, @(r2+,r0)
-	st2w	r42, @(r2+,r0)
-	st2w	r44, @(r2+,r0)
-	st2w	r46, @(r2+,r0)
-	st2w	r48, @(r2+,r0)
-	st2w	r50, @(r2+,r0)
-	st2w	r52, @(r2+,r0)
-	st2w	r54, @(r2+,r0)
-	st2w	r56, @(r2+,r0)
-	st2w	r58, @(r2+,r0)
-	st2w	r60, @(r2+,r0)
-	st2w	r62, @(r2+,r0)
-
-	mvfacc	r4, a1, 16
-	mvfacc	r5, a1, 0
-	st2w	r4, @(r2+,r0)
-
-	mvfsys	r4, psw
-	mvfsys	r5, rpt_c
-	st2w	r4, @(r2+,r0)
-
-	mvfsys	r4, rpt_s
-	mvfsys	r5, rpt_e
-	st2w	r4, @(r2+,r0)
-
-	mvfsys	r4, mod_s
-	mvfsys	r5, mod_e
-	st2w	r4, @(r2+,r0)
-
-; Return 0 to caller
-	add	r2, r0, r0
-	jmp	link
-.Lsetjmp:
-	.size	setjmp,.Lsetjmp-setjmp
-	.stabs	"",36,0,0,.Lsetjmp-setjmp
-
-	.globl	longjmp
-	.type	longjmp,@function
-	.stabs	"longjmp:F(0,1)",36,0,1,longjmp
-longjmp:
-; Address of jmpbuf is in R2.  Restore the registers.
-	ld2w	r26, @(r2+,r0)
-	ld2w	r28, @(r2+,r0)
-	ld2w	r30, @(r2+,r0)
-	ld2w	r32, @(r2+,r0)
-	ld2w	r34, @(r2+,r0)
-	ld2w	r36, @(r2+,r0)
-	ld2w	r38, @(r2+,r0)
-	ld2w	r40, @(r2+,r0)
-	ld2w	r42, @(r2+,r0)
-	ld2w	r44, @(r2+,r0)
-	ld2w	r46, @(r2+,r0)
-	ld2w	r48, @(r2+,r0)
-	ld2w	r50, @(r2+,r0)
-	ld2w	r52, @(r2+,r0)
-	ld2w	r54, @(r2+,r0)
-	ld2w	r56, @(r2+,r0)
-	ld2w	r58, @(r2+,r0)
-	ld2w	r60, @(r2+,r0)
-	ld2w	r62, @(r2+,r0)
-
-	ld2w	r4, @(r2+,r0)
-	mvtacc	a1, r4, r5
-
-	mvfsys	r6, psw
-	ld2w	r4, @(r2+,r0)		/* psw, rpt_c */
-	and	r6, r6, 0xfcff		/* set rp, md bits from setjmp, leave */
-	and	r4, r4, 0x0300		/* all other psw bits the same */
-	or	r4, r4, r6
-	mvtsys	psw, r4
-	mvtsys	rpt_c, r5
-
-	ld2w	r4, @(r2+,r0)
-	mvtsys	rpt_s, r4
-	mvtsys	rpt_e, r5
-
-	ld2w	r4, @(r2+,r0)
-	mvtsys	mod_s, r4
-	mvtsys	mod_e, r5
-
-; Value to return to caller is in R3.  If caller attemped to return 0,
-; return 1 instead.
-
-	cmpeq	f0, r3, 0	|| 	add	r2, r3, r0
-	jmp	link		||	add/tx	r2, r2, 1
-.Llongjmp:
-	.size	longjmp,.Llongjmp-longjmp
-	.stabs	"",36,0,0,.Llongjmp-longjmp
diff --git a/newlib/libc/machine/fr30/Makefile.am b/newlib/libc/machine/fr30/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/fr30/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/fr30/Makefile.in b/newlib/libc/machine/fr30/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/fr30/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/fr30/aclocal.m4 b/newlib/libc/machine/fr30/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/fr30/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/fr30/configure b/newlib/libc/machine/fr30/configure
deleted file mode 100755
index 6afd35773..000000000
--- a/newlib/libc/machine/fr30/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=Makefile.am
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/fr30/configure.in b/newlib/libc/machine/fr30/configure.in
deleted file mode 100644
index a5384f62a..000000000
--- a/newlib/libc/machine/fr30/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/arm configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/fr30/setjmp.S b/newlib/libc/machine/fr30/setjmp.S
deleted file mode 100644
index 98ac44d48..000000000
--- a/newlib/libc/machine/fr30/setjmp.S
+++ /dev/null
@@ -1,64 +0,0 @@
-# setjmp/longjmp for FR30.  The jmpbuf looks like this:
-#	
-# Register	jmpbuf offset
-# R8		0x00
-# R9		0x04
-# R10		0x08
-# R11		0x0c
-# R12		0x10
-# R13		0x14
-# R14 (FP)	0x18
-# R15 (SP)	0x1c
-# RP            0x20
-	
-.macro save reg
-	st	\reg,@r4
-	add	#4,r4
-.endm
-	
-.macro restore reg
-	ld	@r4,\reg
-	add	#4,r4
-.endm
-
-
-	.text
-	.global	setjmp
-setjmp:
-	save	r8
-	save	r9
-	save	r10
-	save	r11
-	save	r12
-	save	r13
-	save	r14
-	save	r15
-	mov	RP,r5
-	st	r5,@r4
-
-# Return 0 to caller.
-	ldi:8	#0,r4
-	ret
-
-	.global	longjmp
-longjmp:
-	restore	r8
-	restore	r9
-	restore	r10
-	restore	r11
-	restore	r12
-	restore	r13
-	restore	r14
-	restore	r15
-	ld	@r4,r4
-	mov	r4,RP
-
-# If caller attempted to return 0, return 1 instead.
-
-	mov	r5,r4
-	or	r4,r4
-	bne	1f
-	ldi:8	#1,r4
-    1:
-	ret
-	
\ No newline at end of file
diff --git a/newlib/libc/machine/frv/Makefile.am b/newlib/libc/machine/frv/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/frv/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/frv/Makefile.in b/newlib/libc/machine/frv/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/frv/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/frv/aclocal.m4 b/newlib/libc/machine/frv/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/frv/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/frv/configure b/newlib/libc/machine/frv/configure
deleted file mode 100755
index 6afd35773..000000000
--- a/newlib/libc/machine/frv/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=Makefile.am
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/frv/configure.in b/newlib/libc/machine/frv/configure.in
deleted file mode 100644
index a5384f62a..000000000
--- a/newlib/libc/machine/frv/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/arm configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/frv/setjmp.S b/newlib/libc/machine/frv/setjmp.S
deleted file mode 100644
index 296eff719..000000000
--- a/newlib/libc/machine/frv/setjmp.S
+++ /dev/null
@@ -1,126 +0,0 @@
-# setjmp/longjmp for Frv.  The jmpbuf looks like this:
-#	
-# Register	jmpbuf offset
-# R16-R31	0x0-0x03c
-# R48-R63	0x40-0x7c
-# FR16-FR31     0x80-0xbc
-# FR48-FR63     0xc0-0xfc
-# LR            0x100
-# SP            0x104
-# FP            0x108
-#
-# R8 contains the pointer to jmpbuf
-
-#include <frv-asm.h>
-
-	.text
-	.global	EXT(setjmp)
-	.type	EXT(setjmp),@function
-EXT(setjmp):
-	stdi	gr16, @(gr8,0)
-	stdi	gr18, @(gr8,8)
-	stdi 	gr20, @(gr8,16)
-	stdi	gr22, @(gr8,24)
-	stdi	gr24, @(gr8,32)
-	stdi	gr26, @(gr8,40)
-	stdi	gr28, @(gr8,48)
-	stdi	gr30, @(gr8,56)
-#if __FRV_GPR__ != 32
-	stdi	gr48, @(gr8,64)
-	stdi	gr50, @(gr8,72)
-	stdi	gr52, @(gr8,80)
-	stdi	gr54, @(gr8,88)
-	stdi	gr56, @(gr8,96)
-	stdi	gr58, @(gr8,104)
-	stdi	gr60, @(gr8,112)
-	stdi	gr62, @(gr8,120)
-#endif
-
-#if __FRV_FPR__ != 0
-	stdfi	fr16, @(gr8,128)
-	stdfi	fr18, @(gr8,136)
-	stdfi 	fr20, @(gr8,144)
-	stdfi	fr22, @(gr8,152)
-	stdfi	fr24, @(gr8,160)
-	stdfi	fr26, @(gr8,168)
-	stdfi	fr28, @(gr8,176)
-	stdfi	fr30, @(gr8,184)
-#if __FRV_FPR__ != 32
-	stdfi	fr48, @(gr8,192)
-	stdfi	fr50, @(gr8,200)
-	stdfi	fr52, @(gr8,208)
-	stdfi	fr54, @(gr8,216)
-	stdfi	fr56, @(gr8,224)
-	stdfi	fr58, @(gr8,232)
-	stdfi	fr60, @(gr8,240)
-	stdfi	fr62, @(gr8,248)
-#endif
-#endif
-
-        movsg	lr, gr4
-	sti     gr4, @(gr8,256)
-	sti     sp, @(gr8,260)
-	sti     fp, @(gr8,264)
-	
-	mov     gr0,gr8
-	ret
-.Lend1:
-	.size	EXT(setjmp),.Lend1-EXT(setjmp)
-
-	.global	EXT(longjmp)
-	.type	EXT(longjmp),@function
-EXT(longjmp):
-	lddi	@(gr8,0), gr16
-	lddi	@(gr8,8), gr18
-	lddi 	@(gr8,16), gr20
-	lddi	@(gr8,24), gr22
-	lddi	@(gr8,32), gr24
-	lddi	@(gr8,40), gr26
-	lddi	@(gr8,48), gr28
-	lddi	@(gr8,56), gr30
-#if __FRV_GPR__ != 32
-	lddi	@(gr8,64), gr48
-	lddi	@(gr8,72), gr50
-	lddi	@(gr8,80), gr52
-	lddi	@(gr8,88), gr54
-	lddi	@(gr8,96), gr56
-	lddi	@(gr8,104), gr58
-	lddi	@(gr8,112), gr60
-	lddi	@(gr8,120), gr62
-#endif
-
-#if __FRV_FPR__ != 0
-	lddfi	@(gr8,128), fr16
-	lddfi	@(gr8,136), fr18
-	lddfi 	@(gr8,144), fr20
-	lddfi	@(gr8,152), fr22
-	lddfi	@(gr8,160), fr24
-	lddfi	@(gr8,168), fr26
-	lddfi	@(gr8,176), fr28
-	lddfi	@(gr8,184), fr30
-#if __FRV_FPR__ != 32
-	lddfi	@(gr8,192), fr48
-	lddfi	@(gr8,200), fr50
-	lddfi	@(gr8,208), fr52
-	lddfi	@(gr8,216), fr54
-	lddfi	@(gr8,224), fr56
-	lddfi	@(gr8,232), fr58
-	lddfi	@(gr8,240), fr60
-	lddfi	@(gr8,248), fr62
-#endif
-#endif
-
-        ldi     @(gr8,256), gr4
-	movgs   gr4,lr
-
-        ldi     @(gr8,260), sp
-        ldi     @(gr8,264), fp
-	
-# Value to return is in r9.  If zero, return 1
-	cmp	gr9, gr0, icc0
-	setlos	#1, gr8
-	ckne	icc0, cc4
-	cmov	gr9, gr8, cc4, 1
-	ret
-.Lend2:
-	.size	EXT(longjmp),.Lend2-EXT(longjmp2)
diff --git a/newlib/libc/machine/h8300/Makefile.am b/newlib/libc/machine/h8300/Makefile.am
deleted file mode 100644
index 2ce8319b4..000000000
--- a/newlib/libc/machine/h8300/Makefile.am
+++ /dev/null
@@ -1,13 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = reg_memcpy.S reg_memset.S strcmp.S memcpy.S memset.S \
-	setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/h8300/Makefile.in b/newlib/libc/machine/h8300/Makefile.in
deleted file mode 100644
index a4c01b821..000000000
--- a/newlib/libc/machine/h8300/Makefile.in
+++ /dev/null
@@ -1,330 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = reg_memcpy.S reg_memset.S strcmp.S memcpy.S memset.S \
-	setjmp.S
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  reg_memcpy.o reg_memset.o strcmp.o memcpy.o memset.o \
-setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/h8300/aclocal.m4 b/newlib/libc/machine/h8300/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/h8300/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/h8300/configure b/newlib/libc/machine/h8300/configure
deleted file mode 100755
index 834aa4c11..000000000
--- a/newlib/libc/machine/h8300/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=memcpy.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/h8300/configure.in b/newlib/libc/machine/h8300/configure.in
deleted file mode 100644
index 013345e00..000000000
--- a/newlib/libc/machine/h8300/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/h8300 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(memcpy.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/h8300/defines.h b/newlib/libc/machine/h8300/defines.h
deleted file mode 100644
index 84b2506d5..000000000
--- a/newlib/libc/machine/h8300/defines.h
+++ /dev/null
@@ -1,132 +0,0 @@
-
-#define A0 r0
-#define A0L r0l
-#define A0H r0h
-
-#define A1 r1
-#define A1L r1l
-#define A1H r1h
-
-#define A2 r2
-#define A2L r2l
-#define A2H r2h
-
-#define A3 r3
-#define A3L r3l
-#define A3H r3h
-
-#define S0 r4
-#define S0L r4l
-#define S0H r4h
-
-#define S1 r5
-#define S1L r5l
-#define S1H r5h
-
-#define S2 r6
-#define S2L r6l
-#define S2H r6h
-
-#ifdef __H8300__
-
-#define MOVP	mov.w	/* pointers are 16 bits */
-#define ADDP	add.w
-#define CMPP	cmp.w
-#define PUSHP	push
-#define POPP	pop
-
-#define A0P	r0
-#define A1P	r1
-#define A2P	r2
-#define A3P	r3
-#define S0P	r4
-#define S1P	r5
-#define S2P	r6
-
-#endif /* __H8300__ */
-
-#ifdef __H8300H__
-
-#ifdef __NORMAL_MODE__
-
-#define MOVP	mov.w	/* pointers are 16 bits */
-#define ADDP	add.w
-#define CMPP	cmp.w
-#define PUSHP	push
-#define POPP	pop
-
-#define A0P	r0
-#define A1P	r1
-#define A2P	r2
-#define A3P	r3
-#define S0P	r4
-#define S1P	r5
-#define S2P	r6
-
-#else /* !__NORMAL_MODE__ */
-
-#define MOVP	mov.l	/* pointers are 32 bits */
-#define ADDP	add.l
-#define CMPP	cmp.l
-#define PUSHP	push.l
-#define POPP	pop.l
-
-#define A0P	er0
-#define A1P	er1
-#define A2P	er2
-#define A3P	er3
-#define S0P	er4
-#define S1P	er5
-#define S2P	er6
-
-#endif /* !__NORMAL_MODE__ */
-
-#define A0E	e0
-#define A1E	e1
-#define A2E	e2
-#define A3E	e3
-
-#endif /* __H8300H__ */
-
-#ifdef __H8300S__
-
-#ifdef __NORMAL_MODE__
-
-#define MOVP	mov.w	/* pointers are 16 bits */
-#define ADDP	add.w
-#define CMPP	cmp.w
-#define PUSHP	push
-#define POPP	pop
-
-#define A0P	r0
-#define A1P	r1
-#define A2P	r2
-#define A3P	r3
-#define S0P	r4
-#define S1P	r5
-#define S2P	r6
-
-#else /* !__NORMAL_MODE__ */
-
-#define MOVP	mov.l	/* pointers are 32 bits */
-#define ADDP	add.l
-#define CMPP	cmp.l
-#define PUSHP	push.l
-#define POPP	pop.l
-
-#define A0P	er0
-#define A1P	er1
-#define A2P	er2
-#define A3P	er3
-#define S0P	er4
-#define S1P	er5
-#define S2P	er6
-
-#endif /* !__NORMAL_MODE__ */
-
-#define A0E	e0
-#define A1E	e1
-#define A2E	e2
-#define A3E	e3
-
-#endif /* __H8300S__ */
diff --git a/newlib/libc/machine/h8300/memcpy.S b/newlib/libc/machine/h8300/memcpy.S
deleted file mode 100644
index 305e865df..000000000
--- a/newlib/libc/machine/h8300/memcpy.S
+++ /dev/null
@@ -1,50 +0,0 @@
-#include "setarch.h"
-
-#include "defines.h"
-
-	.global _memcpy
-_memcpy:
-;	MOVP	@(2/4,r7),A0P	; dst
-;	MOVP	@(4/8,r7),A1P	; src
-;	MOVP	@(6/12,r7),A2P	; len
-
-	MOVP	A0P,A3P	; keep copy of final dst
-	ADDP	A2P,A0P	; point to end of dst
-	CMPP	A0P,A3P	; see if anything to do
-	beq	quit
-
-	ADDP	A2P,A1P	; point to end of src
-
-	; lets see if we can do this in words
-	or	A0L,A2L	; or in the dst address
-	or	A3L,A2L	; or the length 
-	or	A1L,A2L	; or the src address
-	btst	#0,A2L	; see if the lsb is zero
-	bne	byteloop
-
-wordloop:
-#ifdef __NORMAL_MODE__
-	sub	#2,A1P
-#else
-	subs	#2,A1P		; point to word
-#endif
-	mov.w	@A1P,A2		; get word
-	mov.w	A2,@-A0P	; save word
-	CMPP	A0P,A3P		; at the front again ?
-	bne 	wordloop
-	rts
-
-byteloop:
-#ifdef __NORMAL_MODE__
-	sub	#1,A1P
-#else
-	subs	#1,A1P		; point to byte
-#endif
-	mov.b	@A1P,A2L	; get byte
-	mov.b	A2L,@-A0P	; save byte
-	CMPP	A0P,A3P 	; at the front again ?
-	bne 	byteloop
-
-	; return with A0 pointing to dst
-quit:	rts
-
diff --git a/newlib/libc/machine/h8300/memset.S b/newlib/libc/machine/h8300/memset.S
deleted file mode 100644
index ccd3fb766..000000000
--- a/newlib/libc/machine/h8300/memset.S
+++ /dev/null
@@ -1,44 +0,0 @@
-#include "setarch.h"
-
-#include "defines.h"
-
-; A0P pointer to cursor
-; A1P thing to copy
-	.global	_memset
-
-_memset:
-
-;	MOVP	@(2/4,r7),A2P	; dst
-;	MOVP	@(4/8,r7),A1	; src thing
-;	MOVP	@(6/12,r7),A3P	; len
-
-	MOVP	A2P,A2P
-	beq	quit
-
-	; A3 points to the end of the area
-	MOVP	A0P,A3P
-	ADDP	A2P,A3P
-
-	; see if we can do it in words
-	; by oring in the start of the buffer to the end address
-
-	or	A0L,A2L
-	btst	#0,A2L
-	bne	byteloop
-	
-	; we can do it a word at a time
-
-	mov.b	A1L,A1H	
-
-wordloop:
-	mov.w	A1,@-A3P
-	CMPP	A3P,A0P
-	bne	wordloop
-quit:	rts	
-
-byteloop:
-	mov.b	A1L,@-A3P
-	CMPP	A3P,A0P
-	bne	byteloop
-	rts
-
diff --git a/newlib/libc/machine/h8300/reg_memcpy.S b/newlib/libc/machine/h8300/reg_memcpy.S
deleted file mode 100644
index 5402fc46d..000000000
--- a/newlib/libc/machine/h8300/reg_memcpy.S
+++ /dev/null
@@ -1,30 +0,0 @@
-#include "setarch.h"
-
-#include "defines.h"
-
-	; dst A0
-	; src A1
-	; len A2
-	.global ___reg_memcpy
-___reg_memcpy:
-
-	MOVP	A0P,A3P	; keep copy of result
-	ADDP	A2P,A0P	; point to end of dst
-	ADDP	A2P,A1P	; point to end of src
-	CMPP	A0P,A3P	; see if anything to do
-	beq	quit
-
-loop:
-#ifdef __NORMAL_MODE__
-	sub     #1,A1P		; point to byte
-#else
-	subs    #1,A1P          ; point to byte
-#endif
-	mov.b	@A1P,A2L	; get byte
-	mov.b	A2L,@-A0P	; save byte
-	CMPP	A0P,A3P 	; at the front again ?
-	bne 	loop
-
-	; return with A0 pointing to dst
-quit:	rts
-
diff --git a/newlib/libc/machine/h8300/reg_memset.S b/newlib/libc/machine/h8300/reg_memset.S
deleted file mode 100644
index ce4f5ca66..000000000
--- a/newlib/libc/machine/h8300/reg_memset.S
+++ /dev/null
@@ -1,30 +0,0 @@
-#include "setarch.h"
-
-#include "defines.h"
-
-	; dst A0
-	; src A1
-	; len A2
-
-	.global ___reg_memset
-___reg_memset:
-	MOVP	A0P,A3P
-	MOVP	A2P,A2P
-	beq	noset
-
-memloop:
-	mov.b	A1L,@A0P
-#ifdef __NORMAL_MODE__
-	add	#1,A0P
-	sub	#1,A2P
-#else
-	adds	#1,A0P
-	subs	#1,A2P
-#endif
-	MOVP	A2P,A2P
-	bne	memloop
-
-noset:
-	MOVP	A3P,A0P
-	rts
-
diff --git a/newlib/libc/machine/h8300/setarch.h b/newlib/libc/machine/h8300/setarch.h
deleted file mode 100644
index b670e1773..000000000
--- a/newlib/libc/machine/h8300/setarch.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifdef __H8300H__
-#ifdef __NORMAL_MODE__
-	.h8300hn
-#else
-	.h8300h
-#endif
-#endif
-#ifdef __H8300S__
-#ifdef __NORMAL_MODE__
-	.h8300sn
-#else
-	.h8300s
-#endif
-#endif
diff --git a/newlib/libc/machine/h8300/setjmp.S b/newlib/libc/machine/h8300/setjmp.S
deleted file mode 100644
index c6661a926..000000000
--- a/newlib/libc/machine/h8300/setjmp.S
+++ /dev/null
@@ -1,57 +0,0 @@
-#include "setarch.h"
-
-	.file "setjmp.S"
-
-	.section .text
-	.align	2
-	.global	_setjmp
-_setjmp:
-#if defined(__H8300H__) || defined(__H8300S__)
-	mov.l	er7,@er0
-	mov.l	er6,@(4,er0)
-	mov.l	er5,@(8,er0)
-	mov.l	er4,@(12,er0)
-	mov.l	@sp,er1
-	mov.l	er1,@(16,er0)
-	sub.l   er0,er0
-#else
-	mov.w	r7,@r0
-	mov.w	r6,@(2,r0)
-	mov.w	r5,@(4,r0)
-	mov.w	r4,@(6,r0)
-	mov.w   @sp,r1
-	mov.w	r1,@(8,r0)
-	sub.w	r0,r0
-#endif
-	rts
-
-	.global	_longjmp
-_longjmp:
-#if defined(__H8300H__) || defined (__H8300S__)
-	mov.l	@er0+,er7
-	mov.l	@er0+,er6
-	mov.l	@er0+,er5
-	mov.l	@er0+,er4
-	mov.l	@er0,er2
-	mov.l	er2,@sp
-#if (__INT_MAX__ <= 32767)
-	mov.w	r1,r0
-#else
-	mov.l   er1,er0
-#endif
-	bne	.L1
-	sub	er0,er0
-	adds	#1,er0
-#else
-	mov.w	@r0+,r7
-	mov.w	@r0+,r6
-	mov.w	@r0+,r5
-	mov.w	@r0+,r4
-	mov.w	@r0,r2
-	mov.w	r2,@sp
-	mov.w	r1,r0
-	bne	.L1
-	mov.w	#1,r0
-#endif
-.L1:
-	rts
diff --git a/newlib/libc/machine/h8300/strcmp.S b/newlib/libc/machine/h8300/strcmp.S
deleted file mode 100644
index 2ee31f05c..000000000
--- a/newlib/libc/machine/h8300/strcmp.S
+++ /dev/null
@@ -1,43 +0,0 @@
-#include "setarch.h"
-
-#include "defines.h"
-
-	.section .text
-	.align 2
-	.global _strcmp
-_strcmp:
-	MOVP	A0P,A2P
-	MOVP	A1P,A3P
-.L5:
-	mov.b	@A2P+,A1L
-	beq	.L3
-	mov.b	@A3P+,A0L
-	cmp.b	A0L,A1L
-	beq	.L5
-#ifdef __NORMAL_MODE__
-	sub	#1,A3P
-#else
-	subs	#1,A3P
-#endif
-.L3:
-	mov.b	@(-1,A2P),A0L
-	mov.b	@A3P,A1L
-	sub.b	A1L,A0L
-	; We have to sign extend the result to 32bits just in case
-	; we are using 32bit integers.
-#ifdef __H8300H__
-	exts.w	r0
-	exts.l	er0
-#else
-#ifdef __H8300S__
-	exts.w	r0
-	exts.l	er0
-#else
-	bld	#7,r0l
-	subx	r0h,r0h
-	subx	r1l,r1l
-	subx	r1h,r1h
-#endif
-#endif
-	rts
-	.end
diff --git a/newlib/libc/machine/h8500/Makefile.am b/newlib/libc/machine/h8500/Makefile.am
deleted file mode 100644
index 2d881a69a..000000000
--- a/newlib/libc/machine/h8500/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = divsi3.c mulsi3.c divhi3.S shifts.c cmpsi.c psi.S setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/h8500/Makefile.in b/newlib/libc/machine/h8500/Makefile.in
deleted file mode 100644
index 3f22a11bf..000000000
--- a/newlib/libc/machine/h8500/Makefile.in
+++ /dev/null
@@ -1,328 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = divsi3.c mulsi3.c divhi3.S shifts.c cmpsi.c psi.S setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  divsi3.o mulsi3.o divhi3.o shifts.o cmpsi.o psi.o \
-setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/h8500/aclocal.m4 b/newlib/libc/machine/h8500/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/h8500/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/h8500/cmpsi.c b/newlib/libc/machine/h8500/cmpsi.c
deleted file mode 100644
index 3357343f5..000000000
--- a/newlib/libc/machine/h8500/cmpsi.c
+++ /dev/null
@@ -1,126 +0,0 @@
-
-union u 
-{
-  struct 
-    {
-      short int msw;
-      unsigned short lsw;
-    } w;
-  long l;
-};
-
-union us
-{
-  struct 
-    {
-      short int msw;
-      unsigned short lsw;
-    } w;
-  long l;
-};
-
-int
-__cmpsi2(long arga,
-	 short int msw_b, unsigned short int lsw_b)
-{
-  union u u;
-  u.l = arga;
-
-  if (u.w.msw != msw_b)
-    {
-      if (u.w.msw < msw_b) return 0;
-      return 2;
-    }
-  if (u.w.lsw != lsw_b) 
-    {
-      if (u.w.lsw < lsw_b) return 0;
-      return 2;
-    }
-  return 1;
-}
-
-
-int
-__ucmpsi2(unsigned long arga,
-	 unsigned short int msw_b, unsigned short int lsw_b)
-{
-  union us u;
-  u.l = arga;
-
-  if (u.w.msw != msw_b)
-    {
-      if (u.w.msw < msw_b) return 0;
-      return 2;
-    }
-  if (u.w.lsw != lsw_b) 
-    {
-      if (u.w.lsw < lsw_b) return 0;
-      return 2;
-    }
-  return 1;
-}
-
-
-union pu 
-{
-  struct {
-    char ignore;
-    signed char msb;
-    unsigned short lsw;
-  } w;
-  long l;
-};
-
-union pun
-{
-  struct {
-    char ignore;
-    unsigned char msb;
-    unsigned short lsw;
-  } w;
-  long l;
-};
-
-
-int
-__cmppsi2(long arga, long argb)
-{
-  union pu a;
-  union pu b;
-  a.l = arga;
-  b.l = argb;
-
-  if (a.w.msb != b.w.msb)
-    {
-      if (a.w.msb < b.w.msb) return 0;
-      return 2;
-    }
-  if (a.w.lsw != b.w.lsw)
-    {
-      if (a.w.lsw < b.w.lsw) return 0;
-      return 2;
-    }
-  return 1;
-}
-
-
-int
-__ucmppsi2(long arga, long argb)
-{
-  union pun a;
-  union pun b;
-  a.l = arga;
-  b.l = argb;
-
-  if (a.w.msb != b.w.msb)
-    {
-      if (a.w.msb < b.w.msb) return 0;
-      return 2;
-    }
-  if (a.w.lsw != b.w.lsw)
-    {
-      if (a.w.lsw < b.w.lsw) return 0;
-      return 2;
-    }
-  return 1;
-}
diff --git a/newlib/libc/machine/h8500/configure b/newlib/libc/machine/h8500/configure
deleted file mode 100755
index 4e1ccde65..000000000
--- a/newlib/libc/machine/h8500/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=cmpsi.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/h8500/configure.in b/newlib/libc/machine/h8500/configure.in
deleted file mode 100644
index e51a5f424..000000000
--- a/newlib/libc/machine/h8500/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/h8500 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(cmpsi.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/h8500/divhi3.S b/newlib/libc/machine/h8500/divhi3.S
deleted file mode 100644
index ee3135110..000000000
--- a/newlib/libc/machine/h8500/divhi3.S
+++ /dev/null
@@ -1,54 +0,0 @@
-	.title "H8/500 DIVIDE"
-!! 2 byte integer Divide code for the H8/500
-!!
-!! Steve Chamberlain
-!! sac@cygnus.com
-!!
-!!
-
-!! args in r1 and r4, result in r0/r1
-
-#if __CODE__==32
-#define RET prts
-#else
-#define RET rts
-#endif
-	.global	__divmodhi4
-
-		
-__divmodhi4:
-	clr.w	r0	
-	tst.w	r1	! neg arg1
-	bpl	PU	
-
-
-	neg.w   r1	
-NU:	tst.w	r4	
-	bmi	NN
-
-NP:	divxu.w	r4,r0
-	neg.w	r0
-	neg.w	r1
-	RET
-
-NN:	neg.w	r4
-	divxu.w	r4,r0
-	neg.w	r0	! get rem sign right
-	RET
-
-
-PU:
-	tst.w	r4
-	bpl	PP
-	
-
-PN:	neg.w	r4
-	divxu.w	r4,r0
-	neg.w	r1
-	RET
-
-PP:	divxu.w	r4,r0	! rem in r0, q in r1
-	RET
-
-	
-	
diff --git a/newlib/libc/machine/h8500/divsi3.c b/newlib/libc/machine/h8500/divsi3.c
deleted file mode 100644
index e19855d0a..000000000
--- a/newlib/libc/machine/h8500/divsi3.c
+++ /dev/null
@@ -1,134 +0,0 @@
-
-#define divnorm(num, den, sign) 		\
-{						\
-  if (num < 0) 					\
-    {						\
-      num = -num;				\
-      sign = 1;					\
-    }						\
-  else 						\
-    {						\
-      sign = 0;					\
-    }						\
-						\
-  if (den < 0) 					\
-    {						\
-      den = - den;				\
-      sign = 1 - sign;				\
-    } 						\
-}
-
-
-
-
-
-unsigned long 
-divmodsi4(int modwanted, unsigned long num, unsigned long den)	
-{						
-  long int bit = 1;				
-  long int res = 0;				
-  long prevden;
-  while (den < num && bit && !(den & (1L<<31)))			       
-    {
-      den <<=1;					
-      bit <<=1;					
-    }						
-  while (bit)
-    {					
-      if (num >= den)
-	{				
-	  num -= den;				
-	  res |= bit;				
-	}						
-      bit >>=1;					
-      den >>=1;					
-    }						
-  if (modwanted) return num;
-  return res;
-}
-
-
-#define exitdiv(sign, res) if (sign) { res = - res;} return res;
-
-long 
-__modsi3 (long numerator, long denominator)
-{
-  int sign = 0;
-  long dividend;
-  long modul;
-
-
-  if (numerator < 0) 
-    {
-      numerator = -numerator;
-      sign = 1;
-    }
-  if (denominator < 0)
-    {
-      denominator = -denominator;
-    }  
-  
-  modul =  divmodsi4 (1, numerator, denominator);
-  if (sign)
-    return - modul;
-  return modul;
-}
-
-
-long 
-__divsi3 (long numerator, long denominator)
-{
-  int sign;
-  long dividend;
-  long modul;
-  divnorm (numerator, denominator, sign);
-
-  dividend = divmodsi4 (0,  numerator, denominator);
-  exitdiv (sign, dividend);
-}
-
-long 
-__umodsi3 (unsigned long numerator, unsigned long denominator)
-{
-  long dividend;
-  long modul;
-
-modul= divmodsi4 (1,  numerator, denominator);
-  return modul;
-}
-
-long 
-__udivsi3 (unsigned long numerator, unsigned long denominator)
-{
-  int sign;
-  long dividend;
-  long modul;
-  dividend =   divmodsi4 (0, numerator, denominator);
-  return dividend;
-}
-
-
-
-
-
-
-#ifdef TEST
-
-
-
-main ()
-{
-  long int i, j, k, m;
-  for (i = -10000; i < 10000; i += 8)
-    {
-      for (j = -10000; j < 10000; j += 11)
-	{
-	  k = i / j;
-	  m = __divsi3 (i, j);
-	  if (k != m)
-	    printf ("fail %d %d %d %d\n", i, j, k, m);
-	}
-    }
-}
-
-#endif
diff --git a/newlib/libc/machine/h8500/mulhi3.c b/newlib/libc/machine/h8500/mulhi3.c
deleted file mode 100644
index 869e131ea..000000000
--- a/newlib/libc/machine/h8500/mulhi3.c
+++ /dev/null
@@ -1,21 +0,0 @@
-
-
-short 
-__mulhi3(short a, short b)
-{
-  int r;
-
-  r = 0;
-  while (a) 
-    {
-      if (a & 1) 
-	{
-	  r += b;
-	  a>>=1;
-	  b<<=1;
-	}
-    }
-  return r;
-}
-
-
diff --git a/newlib/libc/machine/h8500/mulsi3.c b/newlib/libc/machine/h8500/mulsi3.c
deleted file mode 100644
index a923e8db5..000000000
--- a/newlib/libc/machine/h8500/mulsi3.c
+++ /dev/null
@@ -1,72 +0,0 @@
-
-typedef union {
-  struct {
-  unsigned int msw;
-  unsigned int lsw;
-} s;
-  long v;
-} u;
-
-long __mulsi3(u a, u b)
-{
-  int s;
-  long pp1;
-  long pp2;
-  long r;
-
-  if (a.s.msw == 0 &&
-      b.s.msw == 0)
-    {
-      return (long)a.s.lsw * b.s.lsw;
-    }
-
-  s = 0;
-  if (a.v < 0)
-    {
-      s = 1;
-      a.v = - a.v;
-    }
-  if (b.v < 0)
-    { 
-      s = 1-s;
-      b.v = - b.v;
-    }
-
-  pp1 = (long)a.s.lsw * b.s.lsw ;
-  pp2 = (long)a.s.lsw * b.s.msw + (long)a.s.msw * b.s.lsw;
-
-  pp1 += pp2 << 16;
-
-  if (s)
-    {
-      pp1 = -pp1;
-    }
-  return pp1;
-}
-long __mulpsi3(long a, long b)
-{
- return a*b;
-}
-
-
-short 
-__mulhi3(short a, short b)
-{
-  int r;
-
-  r = 0;
-  while (a) 
-    {
-      if (a & 1) 
-	{
-	  r += b;
-
-	}
-      b<<=1;
-      a>>=1;
-
-    }
-  return r;
-}
-
-
diff --git a/newlib/libc/machine/h8500/negsi2.c b/newlib/libc/machine/h8500/negsi2.c
deleted file mode 100644
index c5b31b19d..000000000
--- a/newlib/libc/machine/h8500/negsi2.c
+++ /dev/null
@@ -1,7 +0,0 @@
-
-
-long
-__negsi2(long x)
-{
-  return ~x+1;
-}
diff --git a/newlib/libc/machine/h8500/psi.S b/newlib/libc/machine/h8500/psi.S
deleted file mode 100644
index 47c818329..000000000
--- a/newlib/libc/machine/h8500/psi.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/* convert psi to si inplace
-
-Note that `fp' below isn't a segment register.
-It's r6, the frame pointer.  */
-
-#if __CODE__==32
-#define RET prts
-#else
-#define RET rts
-#endif
-
-#define EXTPSISI_SN(r_msw,r_lsw,sp)		; \
-	.global	__extpsisi##r_msw		; \
-__extpsisi##r_msw:				; \
-	mov	r_msw,r_lsw			; \
-	stc	sp,r_msw			; \
-	RET
-
-	EXTPSISI_SN(r2,r3,dp)
-	EXTPSISI_SN(r4,r5,ep)
-
-
-#define ADDPSI_AR_RN(sr,an,r_msw,r_lsw)	\
-	.global	__addpsi##an##r_msw ;	\
-__addpsi##an##r_msw:		 ;	\
-	stc	sr,@-sp		 ;	\
-	add	an,r_lsw		 ;	\
-	addx	@sp+,r_msw		 ;	\
-	RET
-
-	ADDPSI_AR_RN(dp,r2,r0,r1)
-	ADDPSI_AR_RN(dp,r2,r3,r4)
-	ADDPSI_AR_RN(ep,r4,r0,r1)
-	ADDPSI_AR_RN(ep,r4,r1,r2)
-	ADDPSI_AR_RN(ep,r4,r3,r4)
-	ADDPSI_AR_RN(ep,r4,r5,fp)
-
-	ADDPSI_AR_RN(tp,fp,r0,r1)
-
-	
-#define ADDPSI_RN_AR(r_msw,r_lsw,sr,an,t_msw,t_lsw)	\
-	.global	__addpsi##r_msw##an		; \
-__addpsi##r_msw##an:				; \
-	mov.w	t_msw,@-sp			; \
-	mov.w	t_lsw,@-sp			; \
-	stc	sr,t_msw			; \
-	mov	an,t_lsw			; \
-	add	r_lsw,t_lsw			; \
-	addx	r_msw,t_msw			; \
-	ldc	t_msw,sr			; \
-	mov.w	t_lsw,an			; \
-	mov.w	@sp+,t_lsw			; \
-	mov.w	@sp+,t_msw			; \
-	RET	
-
-	ADDPSI_RN_AR(r0,r1,dp,r2,r4,r5)
-	ADDPSI_RN_AR(r0,r1,ep,r4,r2,r3)
-
-
-
-#define EXTPSIHI_RN_RN(rm,r_msw,r_lsw)	; \
-	.global	__extpsihi##rm##r_msw 	; \
-__extpsihi##rm##r_msw:		   	; \
-	mov	rm,r_lsw	   	; \
-	clr.w	r_msw		   	; \
-	RET
-
-	EXTPSIHI_RN_RN(r3,r0,r1)
-	EXTPSIHI_RN_RN(r4,r0,r1)
-	EXTPSIHI_RN_RN(r5,r0,r1)
-	EXTPSIHI_RN_RN(r2,r0,r1)
-
-
-
-/* ifdefed out, because gcc doesn't like the # character in the above
-   macro.  The macro expands into an assembly languange comment anyways,
-   so it serves no useful purpose.  */
-#if 0
-#define EXTPSIHI_RN_SN(rm,r_msw,r_lsw)	; \
-	.global	__extpsihi##rm##r_lsw 	; \
-__extpsihi##rm##r_lsw:		   	; \
-	mov	rm,r_lsw	   	; \
-	ldc	\#0,r_msw	   	; \
-	RET
-
-	EXTPSIHI_RN_SN(r0,dp,r2)
-	EXTPSIHI_RN_SN(r0,ep,r4)
-	EXTPSIHI_RN_SN(r1,dp,r2)
-	EXTPSIHI_RN_SN(r1,ep,r4)
-	EXTPSIHI_RN_SN(r3,dp,r2)
-	EXTPSIHI_RN_SN(r3,ep,r4)
-	EXTPSIHI_RN_SN(r5,dp,r2)
-	EXTPSIHI_RN_SN(r5,ep,r4)
-	EXTPSIHI_RN_SN(r2,ep,r4)
-#endif
-
-
-#define EXTPSISI_RN(r_msw,r_lsw)		; \
-	.global	__extpsisi##r_msw	 	; \
-__extpsisi##r_msw:		   		; \
-	RET
-
-	EXTPSISI_RN(r0,r1)
-
-
-
-#define ADDPSI_SA_SB(sa,ra,sb,rb)	; \
-	.global	__addpsi##ra##rb	; \
-__addpsi##ra##rb:			; \
-	mov.w	r0,@-sp			; \
-	mov.w	r1,@-sp			; \
-	stc	sa,r0			; \
-	stc	sb,r1			; \
-	add.w	ra,rb			; \
-	addx	r0,r1			; \
-	ldc	r1,sb			; \
-	mov.w	@sp+,r1			; \
-	mov.w	@sp+,r0			; \
-	RET		
-
-
-	ADDPSI_SA_SB(dp,r2,ep,r4)
-	ADDPSI_SA_SB(ep,r4,dp,r2)
-	ADDPSI_SA_SB(tp,fp,dp,r2)
-	ADDPSI_SA_SB(tp,fp,ep,r4)
-
-	ADDPSI_SA_SB(dp,r2,dp,r2)
-
-
-
-	.global	__addpsir0r0
-__addpsir0r0:
-	add.w	r1,r1
-	addx	r0,r0
-	RET
-
diff --git a/newlib/libc/machine/h8500/setjmp.S b/newlib/libc/machine/h8500/setjmp.S
deleted file mode 100644
index 4b25fc0c9..000000000
--- a/newlib/libc/machine/h8500/setjmp.S
+++ /dev/null
@@ -1,27 +0,0 @@
-!
-	.file	"setjmp.S"
-	.section .text
-
-	.global	_setjmp
-_setjmp:
-	mov.w	r7,@r0+
-	mov.w	r6,@r0+
-	mov.w	r5,@r0+
-	mov.w	@sp,r1
-	mov.w	r1,@r0
-	clr.w	r0
-	rts
-
-	.global	_longjmp
-_longjmp:
-	mov.w	@r0+,r7
-	mov.w	@r0+,r6
-	mov.w	@r0+,r5
-	mov.w	@r0,r2
-	mov.w	r2,@sp
-	mov.w	r1,r0
-	tst.w	r0
-	bne	.L1
-	mov.w	#1,r0
-.L1:
-	rts
diff --git a/newlib/libc/machine/h8500/shifts.c b/newlib/libc/machine/h8500/shifts.c
deleted file mode 100644
index 5b8106931..000000000
--- a/newlib/libc/machine/h8500/shifts.c
+++ /dev/null
@@ -1,45 +0,0 @@
-
-
-int __ashrhi3(int a,int b)
-{
-  return a>>b;
-}
-
-int __ashlhi3(int a,int b)
-{
-  return a<<b;
-}
-
-unsigned __lshlhi3(unsigned int a,int b)
-{
-  return a<<b;
-}
-
-unsigned __lshrhi3(unsigned int a,int b)
-{
-  return a>>b;
-}
-
-
-
-
-long __ashrsi3(long a, int b)
-{
-  return a>>b;
-}
-
-long __ashlsi3(long a,int b)
-{
-  return a<<b;
-}
-
-unsigned __lshlsi3(unsigned long a,int b)
-{
-  return a<<b;
-}
-
-unsigned __lshrsi3(unsigned long a,int b)
-{
-  return a>>b;
-}
-
diff --git a/newlib/libc/machine/hppa/DEFS.h b/newlib/libc/machine/hppa/DEFS.h
deleted file mode 100644
index a8b19b5b4..000000000
--- a/newlib/libc/machine/hppa/DEFS.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include "pcc_prefix.s"
-
-#define	BLANK
-#define	BANNER(str)	BLANK	.VERSION str
-#define	ENTRY(Name)	BLANK	M_ENTRY	(Name,PROF_/**/Name)
-#define	ENTRYC(Name)	BLANK	M_ENTRYC(Name,PROF_/**/Name)
-#define	EXIT(Name)	BLANK	M_EXIT	(Name,PROF_/**/Name)
-#define	EXITC(Name)	BLANK	M_EXITC	(Name,PROF_/**/Name)
-
-#if 0
-#define TEXT_SEGMENT \
-        .SPACE  $TEXT$          !\
-        .SUBSPA $CODE$
-#define RO_SEGMENT \
-        .SPACE  $TEXT$          !\
-        .SUBSPA $lit$
-#define DATA_SEGMENT \
-        .SPACE  $PRIVATE$          !\
-        .SUBSPA $data$
-#define BSS_SEGMENT \
-        .SPACE  $PRIVATE$          !\
-        .SUBSPA $bss$
-#else
-#define TEXT_SEGMENT .text
-#define RO_SEGMENT .rodata
-#define DATA_SEGMENT .data
-#define BSS_SEGMENT .bss
-#endif
-
-
-
-
-#ifdef PROF
-
-;
-; All four argument registers are saved into caller save registers
-; and restored after the call to _mcount.  This is possible because
-; the mcount routine does not modify them, so we can.  Mcount takes
-; 3 arguments; the first argument is the incoming 'rp', the second
-; is the starting address of the profiled routine, and the third is
-; the address of the PROF label (which is where mcount stores the
-; profile data).
-;
-#define M_ENTRY(name,prof)	\
-	TEXT_SEGMENT		!\
-        .label name		!\
-        .PROC			!\
-	.CALLINFO CALLER,SAVE_RP !\
-	.ENTRY			!\
-	stw	rp,-20(sp)	!\
-	ldo	48(sp),sp	!\
-	or	arg0,r0,r19	!\
-	or	arg1,r0,r20	!\
-	or	arg2,r0,r21	!\
-	or	arg3,r0,r22	!\
-	or	rp,r0,arg0	!\
-	ldil	L%name,r1	!\
-	ldo	R%name(r1),arg1	!\
-	addil	L%prof-$global$,dp	!\
-	bl	_mcount,rp	!\
-	ldo	R%prof-$global$(r1),arg2	!\
-	ldw	-68(sp),rp	!\
-	ldo	-48(sp),sp	!\
-	or	r19,r0,arg0	!\
-	or	r20,r0,arg1	!\
-	or	r21,r0,arg2	!\
-	or	r22,r0,arg3	!\
-
-
-#define M_ENTRYC(name,prof)	\
-	TEXT_SEGMENT		!\
-        .label name		!\
-        .PROC			!\
-	.CALLINFO CALLER,SAVE_RP !\
-	.ENTRY			!\
-	stw	rp,-20(sp)	!\
-	ldo	128(sp),sp	!\
-	or	arg0,r0,r19	!\
-	or	arg1,r0,r20	!\
-	or	arg2,r0,r21	!\
-	or	arg3,r0,r22	!\
-	or	rp,r0,arg0	!\
-	ldil	L%name,r1	!\
-	ldo	R%name(r1),arg1	!\
-	addil	L%prof-$global$,dp	!\
-	bl	_mcount,rp	!\
-	ldo	R%prof-$global$(r1),arg2	!\
-	ldw	-148(sp),rp	!\
-	or	r19,r0,arg0	!\
-	or	r20,r0,arg1	!\
-	or	r21,r0,arg2	!\
-	or	r22,r0,arg3	!\
-
-;
-; The HPUX profiler uses a word for each entrypoint to store the profiling
-; information.  The setup code passes the address to the _mcount routine.
-; The EXIT macro defines a label (PROF_foo), and a word of storage.
-;
-#define M_EXIT(name,prof)	\
-        bv,n	r0(rp)		!\
-	.EXIT			!\
-        .PROCEND		!\
-        .EXPORT	name,ENTRY	!\
-	DATA_SEGMENT		!\
-	.label prof		!\
-	.WORD	0		!\
-	.IMPORT	$global$,DATA	!\
-	.IMPORT	_mcount,CODE
-
-#define M_EXITC(name,prof)	\
-        bv	r0(rp)		!\
-        ldo	-128(sp),sp	!\
-	.EXIT			!\
-        .PROCEND		!\
-        .EXPORT	name,ENTRY	!\
-	DATA_SEGMENT		!\
-	.label prof		!\
-	.WORD	0		!\
-	.IMPORT	$global$,DATA	!\
-	.IMPORT	_mcount,CODE
-
-#else	/* NOT profiling */
-
-#define M_ENTRY(name,prof)	\
-	TEXT_SEGMENT		!\
-        .label name	!\
-        .PROC		!\
-        .CALLINFO	!\
-	.ENTRY
-
-#define M_ENTRYC(name,prof)	\
-	TEXT_SEGMENT		!\
-        .label name	!\
-        .PROC		!\
-        .CALLINFO CALLER,SAVE_RP	!\
-	.ENTRY		!\
-        stw     rp,-20(sp)	!\
-        ldo     128(sp),sp
-
-#define M_EXIT(name,prof)	\
-        bv,n	r0(rp)	!\
-	.EXIT		!\
-        .PROCEND	!\
-        .EXPORT	name,ENTRY
-
-#define M_EXITC(name,prof)	\
-        ldw	-148(sp),rp	!\
-        bv	r0(rp)	!\
-        ldo	-128(sp),sp	!\
-	.EXIT		!\
-        .PROCEND	!\
-        .EXPORT	name,ENTRY
-
-#define	ENTRY(Name)	BLANK	M_ENTRY	(Name,PROF_/**/Name)
-#define	ENTRYC(Name)	BLANK	M_ENTRYC(Name,PROF_/**/Name)
-#define	EXIT(Name)	BLANK	M_EXIT	(Name,PROF_/**/Name)
-#define	EXITC(Name)	BLANK	M_EXITC	(Name,PROF_/**/Name)
-
-
-#endif
-
diff --git a/newlib/libc/machine/hppa/Makefile.am b/newlib/libc/machine/hppa/Makefile.am
deleted file mode 100644
index 413cd722a..000000000
--- a/newlib/libc/machine/hppa/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	memchr.S memcmp.S memcpy.S memset.S setjmp.S strcat.S strcmp.S \
-	strcpy.S strlen.S strncat.S strncmp.S strncpy.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/hppa/Makefile.in b/newlib/libc/machine/hppa/Makefile.in
deleted file mode 100644
index b53e5b736..000000000
--- a/newlib/libc/machine/hppa/Makefile.in
+++ /dev/null
@@ -1,331 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	memchr.S memcmp.S memcpy.S memset.S setjmp.S strcat.S strcmp.S \
-	strcpy.S strlen.S strncat.S strncmp.S strncpy.S
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  memchr.o memcmp.o memcpy.o memset.o setjmp.o strcat.o \
-strcmp.o strcpy.o strlen.o strncat.o strncmp.o strncpy.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/hppa/aclocal.m4 b/newlib/libc/machine/hppa/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/hppa/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/hppa/configure b/newlib/libc/machine/hppa/configure
deleted file mode 100755
index f7eb96f49..000000000
--- a/newlib/libc/machine/hppa/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=memchr.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/hppa/configure.in b/newlib/libc/machine/hppa/configure.in
deleted file mode 100644
index 59ec18d3a..000000000
--- a/newlib/libc/machine/hppa/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/hppa configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(memchr.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/hppa/memchr.S b/newlib/libc/machine/hppa/memchr.S
deleted file mode 100644
index 1cca3e5e8..000000000
--- a/newlib/libc/machine/hppa/memchr.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* SPECTRUM_ID: @(#)memchr.s	37.4     86/04/23 */
-/*
- * memchr(s, c, n)
- *
- * returns pointer to first occurrence of char c
- * in first n characters of memory area s,
- * or null if c does not occur.
- */
-
-#include "DEFS.h"
-
-#define FROM	arg0
-#define CHAR	arg1
-#define COUNT	arg2
-#define TEMP1	r19
-
-ENTRY(memchr)
-	comb,<=	COUNT,r0,memchrexit	/* return if count is zero */
-	copy	r0,ret0			/* null if c not found in n chars */
-	depi	0,23,24,CHAR		/* make char unsigned */
-
-	ldbs,ma	1(FROM),TEMP1
-memchrloop:
-	comb,=,n	TEMP1,CHAR,memchrequal
-	addib,<>	-1,COUNT,memchrloop
-	ldbs,ma	1(FROM),TEMP1
-	b,n	memchrexit
-
-memchrequal:
-	ldo	-1(FROM),ret0
-
-memchrexit:
-EXIT(memchr)
diff --git a/newlib/libc/machine/hppa/memcmp.S b/newlib/libc/machine/hppa/memcmp.S
deleted file mode 100644
index babb20761..000000000
--- a/newlib/libc/machine/hppa/memcmp.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* memcmp(s1, s2, n) */
-/* returns integer: < 0 iff s1 lexicographically less than s2 */
-/* 		    > 0 iff s1 lexicographically greater than s2 */
-/* 		    = 0 iff s1 lexicographically equal to s2 */
-/*  		    = 0 iff s1 lexicographically equal to s2 */
-/*		    quit after n charachters */
-#ifndef _NAMESPACE_CLEAN
-#define NOSECDEF   /* prevents _memcmp from becoming primary entry */
-#endif
-
-#include "DEFS.h"
-
-#define s1 26
-#define s2 25
-#define tmp1 19
-#define s2word 20
-#define tmp3 21
-#define tmp7 22
-#define s1word 29
-#define save 1
-#define tmp6 23
-#define tmp5 28
-#define count 24
-
-ENTRY(memcmp)
-	combt,<,n	r0,count,search	/*N <= 0 yields equality */
-	b	done			/**/
-	copy	0,ret0			/*return 0 (DELAY SLOT) */
-search:	combf,=,n 	s1,s2,findout 	/*s1 != s2? */
-        b	done
-        copy 	0,ret0			/*return 0 (delay slot) 	 */
-findout:
-        comibf,=,n 	0,s1,checks1	/*s1 == NULL? 	 */
-	ldbs	0(0,s2),ret0		/**/
-        b	done 			/*quit	 */
-	sub	0,ret0,ret0		/*ret0 <- -*s2 */
-checks1:
-        comibf,=,n 	0,s2,checkitout	/*s2 == NULL? 	 */
-        b	done 			/* quit	 */
-        ldbs 	0(0,s1),28 		/* return *s1 */
-
-checkitout:
-        extru	s2,31,2,tmp1		/* Extract the low two bits of the s2. */
-        extru	s1,31,2,tmp5		/* Extract the low two bits of the s1 */
-        sub,=	tmp5,tmp1,tmp3		/* Are s1 & s2 aligned with each other? */
-	b	not_aligned		/* It's more complicated (not_aligned) */
-	dep	0,31,2,s1		/* Compute word address of s1 (DELAY SLOT) */
-	dep	0,31,2,s2		/* Compute word address of s2 */
-	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
-	combt,=	tmp5,r0,skipmask	/* skip masking, if we can */
-	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 (DELAY SLOT) */
-	add	tmp5,count,count	/* bump count by the number of bytes */
-					/*  we are going to mask */
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word	/* mask s1word (s1) */
-	or	save,s2word,s2word	/* mask s2word (s2) */
- 	
-
-skipmask:
-	combt,=,n	s1word,s2word,checkN	/* We may be done */
-
-checkbyte:
-	extru	s1word,7,8,tmp3		/* get first byte (character) */
-ckbyte2:	extru	s2word,7,8,tmp7		/* get first byte (character) */
-	combf,=	tmp3,tmp7,done		/* quit if first byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? ret0 == 0 */
-	extru	s1word,15,8,tmp3	/* get second byte (character) */
-	extru	s2word,15,8,tmp7	/* get second byte (character)	 */
-	combf,=	tmp3,tmp7,done		/* quit if second byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? */
-	extru	s1word,23,8,tmp3	/* get third byte (character) */
-	extru	s2word,23,8,tmp7	/* get third byte (character)	 */
-	combf,=	tmp3,tmp7,done		/* done if third byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? */
-	extru	s1word,31,8,tmp3	/* get last byte (character) */
-	extru	s2word,31,8,tmp7	/* get last byte (character)	 */
-	b	done			/* if we reach this point we know that */
-	sub	tmp3,tmp7,ret0		/*  the last character in the word is */
-					/*   where the  difference is, so return */
-					/*    the difference and we're outta here */
-
-
-checkN:
-	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
-	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 */
-	b	skipmask		/* keep checking */
-	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
-
-
-not_aligned:
-	dep	r0,31,2,s2		/* Compute word address of s2 */
-	combt,<,n	r0,tmp3,shifts1	/* Do we shift s1 or s2 */
-	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
-	ldwm	4(0,s1),s1word		/* get first word of s1 */
-	ldwm	4(0,s2),s2word		/* get first word or s2 */
-	combt,=,n	r0,tmp5,masks2	/* Do we need to mask beginning of s1 */
-	add	tmp5,count,count	/* bump count by the number of bytes */
-					/*  we are going to mask */
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word	/**/
-masks2:	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s2word,s2word	/**/
-	subi	4,tmp1,tmp1		/* tmp1 now has the number of byte that */
-					/* are valid in s2word before the vshd */
-	mtctl	tmp3,11			/* Move shift amount to CR11 */
-more:	combt,<=,n	count,tmp1,chunk1	/* Can we do the vshd? */
-	ldwm	4(0,s2),tmp7		/* load second word to enable us to shift */
-	vshd	s2word,tmp7,s2word	/**/
-	combf,=,n	s1word,s2word,ckbyte2	/**/
-	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
-	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
-	copy	tmp7,s2word		/**/
-	b	more			/* keep checking */
-	ldwm	4(0,s1),s1word		/* get next s1 (DELAY SLOT) */
-
-chunk1:
-	vshd	s2word,r0,s2word	/* do an arithmetic shift left to position data */
-	b	ckbyte2			/**/
-	extru	s1word,7,8,tmp3		/**/
-
-
-shifts1:
-	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
-	sub	r0,tmp3,tmp3		/* Get negative value for left shift */
-	dep	r0,31,2,s2		/* Compute word address of s2 */
-	ldwm	4(0,s2),s2word		/* get first word of s2 */
-	ldwm	4(0,s1),s1word		/* get first word or s1 */
-	combt,=,n	r0,tmp1,masks1	/*Do we need to mask beginning of s2 */
-	add	tmp1,count,count	/*bump count by the number of bytes */
-					/* we are going to mask */
-	sh3add	tmp1,r0,save		/*save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/*load save with proper mask */
-	or	save,s2word,s2word	/**/
-masks1:	sh3add	tmp5,r0,save		/*save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/*load save with proper mask */
-	or	save,s1word,s1word	/**/
-	subi	4,tmp5,tmp5		/*tmp5 now has the number of byte that */
-					/*are valid in s1word before the vshd */
-	mtctl	tmp3,11			/*Move shift amount to CR11 */
-more1:	combt,<=,n	count,tmp5,chunk2	/*Can we do the vshd? */
-	ldwm	4(0,s1),tmp7		/*load second word to enable us to shift */
-	vshd	s1word,tmp7,s1word	/**/
-	combf,=,n	s2word,s1word,ckbyte2	/**/
-	extru	s1word,7,8,tmp3		/*get first byte (DELAY SLOT) */
-	addibt,<=,n	-4,count,zero	/*have we checked N chars? */
-	copy	tmp7,s1word		/**/
-	b	more1			/*keep checking */
-	ldwm	4(0,s2),s2word		/*get next s2 (DELAY SLOT) */
-
-chunk2:	
-	vshd	s1word,r0,s1word	/**/
-	b	ckbyte2			/**/
-	extru	s1word,7,8,tmp3		/**/
-
-zero:	copy 	r0,ret0
-done:
-EXIT(memcmp)
diff --git a/newlib/libc/machine/hppa/memcpy.S b/newlib/libc/machine/hppa/memcpy.S
deleted file mode 100644
index 713c1c11b..000000000
--- a/newlib/libc/machine/hppa/memcpy.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* HPUX_ID:	@(#) $Revision$	*/
-/*
- * memcpy(s1, s2, n)
- *
- * Copy n characters from s2 to s1; returns s1.
- */
-
-#define d_addr  arg0
-#define s_addr  arg1
-#define count   arg2
-#define tmp5	arg3
-#define tmp1    r19
-#define tmp2    r20
-#define tmp3    r21
-#define tmp4    r22
-#define tmp6	r31
-
-#include "DEFS.h"
-
-ENTRY(memcpy)
-        comib,>=  5,count,byteloop     /* If count is <= 6 don't get fancy.*/ 
-        movb,=,n      d_addr,ret0,done    /* The return value is defined to be the value of d_addr. DELAY SLOT */
-					/* if d_addr is null then exit */
-        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
-        extru       d_addr,31,2,tmp2   /* Extract the low two bits of the destination address. */
-        add         count,tmp2,count   /* pre increment the count to adjust for alignment of s1 */
-        comb,<>       tmp2,tmp1,not_aligned /* see if s1 is aligned w.r.t. s2. */
-        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
-
-/* aligned */
-
-/* We will now begin the 16 byte at a time word move if count >= 16 ! */
-/* Else we will branch to the  4 byte-at-a time word move ! */
-
-        addibt,<,n -16,count,chekchunk  /* If count < 16 then we can't move 16 byte chunks ! */
-                                        /*   actually we can legally move 13 or more bytes on the first loop.  */
-        /* These loads and stores are done so as to prevent processor interlock. */
-chunks:
-        ldwm        16(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 16 */
-        ldw         -12(0,s_addr),tmp2  /* tmp2 = 2nd word */
-        ldw         -8(0,s_addr),tmp3   /* tmp3 = 3rd word */
-        ldw         -4(0,s_addr),tmp4   /* tmp4 = 4th word */
-        /* Now store the results !  */
-        stbys,b,m   tmp1,4(0,d_addr)   /* tmp1 = 1st word stored d_addr += 16 also take care of front porch. */
-        stwm        tmp2,4(0,d_addr)    /* tmp2 = 2nd word stored. */
-        stwm        tmp3,4(0,d_addr)   /* tmp3 = 3rd word stored. */
-        addibf,<    -16,count,chunks    /* If count is still >= 16 do another loop. */
-        stwm        tmp4,4(0,d_addr)   /* tmp4 = 4th word stored. DELAY SLOT */
-
-chekchunk:
-        addibt,<,n  12,count,back_porch /* since the count is already decremented by -16 we're testing */
-                                        /*   to see if there are at least 4 bytes left ? */
-subchunk:
-        ldws,ma      4(s_addr),tmp1     /* tmp1 = *s_addr++ */
-        addibf,<     -4,count,subchunk  /* count -= 4 */
-        stbys,b,m    tmp1,4(d_addr)     /* *d_addr++ = tmp1 */
-
-
-back_porch:
-         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done ! */
-         ldws        0(s_addr),tmp1     /* load up the back_porch */
-         add         d_addr,count,d_addr/* final store address  is +1 too high ! */
-	 bv		0(r2)		/* return--were done. */
-         stbys,e     tmp1,0(d_addr)    /* kerplunk! whew !  */
-
-/* Begin non_aligned code. (no refrence to politics) */
-not_aligned:
-        sub,>=       tmp2,tmp1,tmp3     /* compute the shift quantity again and skip the load if tmp2 > tmp1. */
-        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++ */
-        zdep         tmp3,28,29,tmp4    /* compute the number of bits to shift based on the number of bytes above. */
-        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register. */
-
-        addibt,<,n   -16,count,chkchnk2 /* first step in pre adjustment of count for looping. */
-
-chunk2:   
-        ldwm        	16(0,s_addr),tmp2    /* get either first or second word . tmp2 = *s_addr++ */
-	ldw		-12(s_addr),tmp3
-	ldw		-8(s_addr),tmp4
-	ldw		-4(s_addr),tmp5
-        vshd		tmp1,tmp2,tmp6      /* position data !  */
-        stbys,b,m	tmp6,4(0,d_addr)    /* store !  */
-
-        vshd		tmp2,tmp3,tmp6      /* position data !  */
-        stwm		tmp6,4(0,d_addr)    /* store ! */
-
-        vshd		tmp3,tmp4,tmp6      /* position data ! */
-        stwm		tmp6,4(0,d_addr)    /* store ! */
-
-        vshd		tmp4,tmp5,tmp6      /* position data ! */
-        stwm   		tmp6,4(0,d_addr)    /* store the data ! */
-        addibf,<    -16,count,chunk2    /* If count is still >= 16 do another loop. */
-	copy		tmp5,tmp1
-        
-
-chkchnk2:
-        addibt,<,n  12,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0) */
-
-subchnk2: 
-        ldwm        4(0,s_addr),tmp2    /* get next word ! */
-        vshd        tmp1,tmp2,tmp3      /* position data ! */
-        addibt,<    -4,count,bp_1       /* decrement count and when count < 4 goto back_porch (bp_1) */
-        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
-
-        ldwm        4(0,s_addr),tmp1    /* get 4th word ! */
-        vshd        tmp2,tmp1,tmp3      /* position data ! */
-        addib,>=    -4,count,subchnk2   /* decrement count and when count <= 4 go to back porch (bp_2) */
-        stbys,b,m   tmp3,4(0,d_addr)    /* store the data ! */
-
-bp_0:    copy        tmp1,tmp2           /* switch registers used in the shift process. */
-bp_1:    addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done  */
-        add         d_addr,count,d_addr /* bump destination address to be +1 too high ! */
-	mfctl		sar,tmp3	/* suppress final ldwm unless result used */
-	extru		tmp3,28,2,tmp3	/* convert bitshift to byteshift */
-	sub,<=		count,tmp3,r0	/* bytes unused if (count-byteshift <= 0*/
-
-        ldwm        4(0,s_addr),tmp1    /* get final word !         */
-        vshd        tmp2,tmp1,tmp3      /* position data ! */
-	bv		0(r2)		/* return */
-        stbys,e     tmp3,0(0,d_addr)    /* store the data ! */
-
-/* here we do ye old byte-at-a-time moves. */
-byteloop: 
-        comb,>=,n    0,count,done
-
-encore:
-        ldbs,ma     1(s_addr),tmp1
-        addibf,=   -1,count,encore
-        stbs,ma     tmp1,1(d_addr) 
-
-done:
-EXIT(memcpy)
diff --git a/newlib/libc/machine/hppa/memset.S b/newlib/libc/machine/hppa/memset.S
deleted file mode 100644
index cea738251..000000000
--- a/newlib/libc/machine/hppa/memset.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* SPECTRUM_ID: @(#)memset.s	37.4     86/08/25 */
-/*
- * memset(s, c, n)
- *
- * Sets first n chars in memory area s to value of character c.
- * Returns s.
- */
-#ifndef _NAMESPACE_CLEAN
-#define NOSECDEF   /* prevent _memset from being defined as entry */
-#endif
-
-#include "DEFS.h"
-
-#define TO	arg0
-#define FILLCHAR arg1
-#define COUNT	arg2
-#define TMP	r31
-
-ENTRY(memset)
-	comb,<=	COUNT,r0,msexit /* return if count not positive */
-	copy	TO,ret0 	/* return value is start of copy */
-	comibf,<,n	5,COUNT,msbyteloop /* be straightforward */
-
-	dep	FILLCHAR,23,8,FILLCHAR	/* dup low byte  */
-	dep	FILLCHAR,15,16,FILLCHAR /* into high bytes */
-
-	add		TO,COUNT,TMP	/* TMP points just past fill area */
-	stbys,m		FILLCHAR,0(TO)	/* fill out first word */
-	/*
-	 * If we're pointing to high-order byte, no fill will happen,
-	 * but permissions will be checked.  We don't want this (we
-	 * might be pointing at the beginning of a protected region),
-	 * so we branch around stbys if neither low bits are set.
-	 */
-	bb,<,n		TMP,31,filend	/* if low bit is set, stbys */
-	bb,>=,n		TMP,30,endfil	/* if next lowest bit isn't set */
-					/*  (and lowest isn't, either) */
-					/*  do not stbys */
-filend:
-	stbys,m,e	FILLCHAR,0(TMP)	/* fill out the last */
-endfil:
-	addi		4, TO, TO
-	sub		TMP,TO,COUNT	/* will now divide by 4 */
-	comb,=,n	COUNT,r0,msexit /* If count is zero ret. */
-
-	extru,<>	COUNT,31,4,r1
-	b		msquadloop
-	depi		0,31,4,COUNT	/* will now divide by 16 */
-
-
-mswordloop:
-	addib,<>	-4,r1,mswordloop
-	stws,ma 	FILLCHAR,4(TO)
-
-	comb,=,n	COUNT,r0,msexit /* If count is zero ret. */
-
-msquadloop:
-	stws,ma 	FILLCHAR,4(TO)
-	stws,ma 	FILLCHAR,4(TO)
-	stws,ma 	FILLCHAR,4(TO)
-	addib,<>	-16,COUNT,msquadloop
-	stws,ma 	FILLCHAR,4(TO)
-	b,n		msexit
-
-msbyteloop:
-	addib,<>	-1,COUNT,msbyteloop
-	stbs,ma		FILLCHAR,1(TO)
-
-msexit:
-EXIT(memset)
diff --git a/newlib/libc/machine/hppa/pcc_prefix.s b/newlib/libc/machine/hppa/pcc_prefix.s
deleted file mode 100644
index 61bf9c9e3..000000000
--- a/newlib/libc/machine/hppa/pcc_prefix.s
+++ /dev/null
@@ -1,393 +0,0 @@
-;
-;  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
-;
-;  To anyone who acknowledges that this file is provided "AS IS"
-;  without any express or implied warranty:
-;      permission to use, copy, modify, and distribute this file
-;  for any purpose is hereby granted without fee, provided that
-;  the above copyright notice and this notice appears in all
-;  copies, and that the name of Hewlett-Packard Company not be
-;  used in advertising or publicity pertaining to distribution
-;  of the software without specific, written prior permission.
-;  Hewlett-Packard Company makes no representations about the
-;  suitability of this software for any purpose.
-;
-
-; Standard Hardware Register Definitions for Use with Assembler
-; version A.08.06
-;	- fr16-31 added at Utah
-;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-; Hardware General Registers
-r0: .equ	0
-
-r1: .equ	1
-
-r2: .equ	2
-
-r3: .equ	3
-
-r4: .equ	4
-
-r5: .equ	5
-
-r6: .equ	6
-
-r7: .equ	7
-
-r8: .equ	8
-
-r9: .equ	9
-
-r10: .equ	10
-
-r11: .equ	11
-
-r12: .equ	12
-
-r13: .equ	13
-
-r14: .equ	14
-
-r15: .equ	15
-
-r16: .equ	16
-
-r17: .equ	17
-
-r18: .equ	18
-
-r19: .equ	19
-
-r20: .equ	20
-
-r21: .equ	21
-
-r22: .equ	22
-
-r23: .equ	23
-
-r24: .equ	24
-
-r25: .equ	25
-
-r26: .equ	26
-
-r27: .equ	27
-
-r28: .equ	28
-
-r29: .equ	29
-
-r30: .equ	30
-
-r31: .equ	31
-
-; Hardware Space Registers
-sr0: .equ	0
-
-sr1: .equ	1
-
-sr2: .equ	2
-
-sr3: .equ	3
-
-sr4: .equ	4
-
-sr5: .equ	5
-
-sr6: .equ	6
-
-sr7: .equ	7
-
-; Hardware Floating Point Registers
-fr0: .equ	0
-
-fr1: .equ	1
-
-fr2: .equ	2
-
-fr3: .equ	3
-
-fr4: .equ	4
-
-fr5: .equ	5
-
-fr6: .equ	6
-
-fr7: .equ	7
-
-fr8: .equ	8
-
-fr9: .equ	9
-
-fr10: .equ	10
-
-fr11: .equ	11
-
-fr12: .equ	12
-
-fr13: .equ	13
-
-fr14: .equ	14
-
-fr15: .equ	15
-
-fr16: .equ	16
-
-fr17: .equ	17
-
-fr18: .equ	18
-
-fr19: .equ	19
-
-fr20: .equ	20
-
-fr21: .equ	21
-
-fr22: .equ	22
-
-fr23: .equ	23
-
-fr24: .equ	24
-
-fr25: .equ	25
-
-fr26: .equ	26
-
-fr27: .equ	27
-
-fr28: .equ	28
-
-fr29: .equ	29
-
-fr30: .equ	30
-
-fr31: .equ	31
-
-; Hardware Control Registers
-cr0: .equ	0
-
-rctr: .equ	0			; Recovery Counter Register
-
-
-cr8: .equ	8			; Protection ID 1
-
-pidr1: .equ	8
-
-
-cr9: .equ	9			; Protection ID 2
-
-pidr2: .equ	9
-
-
-cr10: .equ	10
-
-ccr: .equ	10			; Coprocessor Confiquration Register
-
-
-cr11: .equ	11
-
-sar: .equ	11			; Shift Amount Register
-
-
-cr12: .equ	12
-
-pidr3: .equ	12			; Protection ID 3
-
-
-cr13: .equ	13
-
-pidr4: .equ	13			; Protection ID 4
-
-
-cr14: .equ	14
-
-iva: .equ	14			; Interrupt Vector Address
-
-
-cr15: .equ	15
-
-eiem: .equ	15			; External Interrupt Enable Mask
-
-
-cr16: .equ	16
-
-itmr: .equ	16			; Interval Timer
-
-
-cr17: .equ	17
-
-pcsq: .equ	17			; Program Counter Space queue
-
-
-cr18: .equ	18
-
-pcoq: .equ	18			; Program Counter Offset queue
-
-
-cr19: .equ	19
-
-iir: .equ	19			; Interruption Instruction Register
-
-
-cr20: .equ	20
-
-isr: .equ	20			; Interruption Space Register
-
-
-cr21: .equ	21
-
-ior: .equ	21			; Interruption Offset Register
-
-
-cr22: .equ	22
-
-ipsw: .equ	22			; Interrpution Processor Status Word
-
-
-cr23: .equ	23
-
-eirr: .equ	23			; External Interrupt Request
-
-
-cr24: .equ	24
-
-ppda: .equ	24			; Physcial Page Directory Address
-
-tr0: .equ	24			; Temporary register 0
-
-
-cr25: .equ	25
-
-hta: .equ	25			; Hash Table Address
-
-tr1: .equ	25			; Temporary register 1
-
-
-cr26: .equ	26
-
-tr2: .equ	26			; Temporary register 2
-
-
-cr27: .equ	27
-
-tr3: .equ	27			; Temporary register 3
-
-
-cr28: .equ	28
-
-tr4: .equ	28			; Temporary register 4
-
-
-cr29: .equ	29
-
-tr5: .equ	29			; Temporary register 5
-
-
-cr30: .equ	30
-
-tr6: .equ	30			; Temporary register 6
-
-
-cr31: .equ	31
-
-tr7: .equ	31			; Temporary register 7
-
-;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-; Procedure Call Convention                                                  ~
-; Register Definitions for Use with Assembler                                ~
-; version A.08.06
-;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-; Software Architecture General Registers
-rp: .equ    r2	; return pointer
-
-mrp: .equ	r31	; millicode return pointer
-
-ret0: .equ    r28	; return value
-
-ret1: .equ    r29	; return value (high part of double)
-
-sl: .equ    r29	; static link
-
-sp: .equ 	r30	; stack pointer
-
-dp: .equ	r27	; data pointer
-
-arg0: .equ	r26	; argument
-
-arg1: .equ	r25	; argument or high part of double argument
-
-arg2: .equ	r24	; argument
-
-arg3: .equ	r23	; argument or high part of double argument
-
-;_____________________________________________________________________________
-; Software Architecture Space Registers
-;		sr0	; return link form BLE
-sret: .equ	sr1	; return value
-
-sarg: .equ	sr1	; argument
-
-;		sr4	; PC SPACE tracker
-;		sr5	; process private data
-;_____________________________________________________________________________
-; Software Architecture Pseudo Registers
-previous_sp: .equ	64	; old stack pointer (locates previous frame)
-
-#if 0
-;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-; Standard space and subspace definitions.  version A.08.06
-; These are generally suitable for programs on HP_UX and HPE.
-; Statements commented out are used when building such things as operating
-; system kernels.
-;;;;;;;;;;;;;;;;
-	.SPACE	$TEXT$,		SPNUM=0,SORT=8
-;	.subspa $FIRST$,	QUAD=0,ALIGN=2048,ACCESS=0x2c,SORT=4,FIRST
-;	.subspa $REAL$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=4,FIRST,LOCK
-	.subspa $MILLICODE$,	QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=8
-	.subspa $LIT$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
-	.subspa $CODE$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=24
-;	.subspa $UNWIND$,	QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=64
-;	.subspa $RECOVER$,	QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=80
-;	.subspa $RESERVED$,	QUAD=0,ALIGN=8,ACCESS=0x73,SORT=82
-;	.subspa $GATE$,		QUAD=0,ALIGN=8,ACCESS=0x4c,SORT=84,CODE_ONLY
-; Additional code subspaces should have ALIGN=8 for an interspace BV
-; and should have SORT=24.
-; 
-; For an incomplete executable (program bound to shared libraries), 
-; sort keys $GLOBAL$ -1 and $GLOBAL$ -2 are reserved for the $DLT$ 
-; and $PLT$ subspaces respectively. 
-;;;;;;;;;;;;;;;
-	.SPACE $PRIVATE$,	SPNUM=1,PRIVATE,SORT=16
-	.subspa $GLOBAL$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=40
-	.import $global$
-	.subspa $SHORTDATA$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=24
-	.subspa $DATA$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=16
-	.subspa $PFA_COUNTER$,	QUAD=1,ALIGN=4,ACCESS=0x1f,SORT=8
-	.subspa $SHORTBSS$,     QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=80,ZERO
-	.subspa $BSS$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82,ZERO
-;	.subspa $PCB$,		QUAD=1,ALIGN=8,ACCESS=0x10,SORT=82
-;	.subspa	$STACK$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82
-;	.subspa	$HEAP$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82
-;;;;;;;;;;;;;;;;
-;	.SPACE	$PFA$,		SPNUM=0,PRIVATE,UNLOADABLE,SORT=64
-;	.subspa	$PFA_ADDRESS$,	ALIGN=4,ACCESS=0x2c,UNLOADABLE
-;;;;;;;;;;;;;;;;
-;	.SPACE	$DEBUG$,	SPNUM=2,PRIVATE,UNLOADABLE,SORT=80
-;	.subspa $HEADER$,	ALIGN=4,ACCESS=0,UNLOADABLE,FIRST
-;	.subspa	$GNTT$,		ALIGN=4,ACCESS=0,UNLOADABLE
-;	.subspa $LNTT$,		ALIGN=4,ACCESS=0,UNLOADABLE
-;	.subspa	$SLT$,		ALIGN=4,ACCESS=0,UNLOADABLE
-;	.subspa $VT$,		ALIGN=4,ACCESS=0,UNLOADABLE
-
-; To satisfy the copyright terms each .o will have a reference
-; the the actual copyright.  This will force the actual copyright
-; message to be brought in from libgloss/hp-milli.s
-        .space $PRIVATE$
-        .subspa $DATA$
-#else
-	.data
-#endif
-        .import ___hp_free_copyright,data
-L$copyright .word ___hp_free_copyright
diff --git a/newlib/libc/machine/hppa/setjmp.S b/newlib/libc/machine/hppa/setjmp.S
deleted file mode 100644
index 7dd7c74e2..000000000
--- a/newlib/libc/machine/hppa/setjmp.S
+++ /dev/null
@@ -1,156 +0,0 @@
-/* Copyright (c) 1995, 2002 Red Hat Incorporated.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *    Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- *    Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- *    The name of Red Hat Incorporated may not be used to endorse
- *    or promote products derived from this software without specific
- *    prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Note I don't know an easy way to get the FP version into the
-   traditional C library and the non-FP version into the soft-float
-   library.  Maybe we'll have to have -msoft-float trigger something
-   like -DSOFT_FLOAT if this issue ever arises.  */
-
-#include "DEFS.h"
-
-#if 0
-	.SPACE $PRIVATE$
-	.SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31
-	.SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82
-	.SPACE $TEXT$
-	.SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44
-	.SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY
-	.IMPORT $global$,DATA
-	.IMPORT $$dyncall,MILLICODE
-; gcc_compiled.:
-#endif
-	TEXT_SEGMENT
-
-	.align 4
-	.EXPORT setjmp,ENTRY,PRIV_LEV=3,ARGW0=GR,RTNVAL=GR
-setjmp
-	.PROC
-	.CALLINFO FRAME=64,NO_CALLS,SAVE_SP,ENTRY_GR=3
-	.ENTRY
-	stwm  %r30,4(%r26)
-	stwm  %r2,4(%r26)
-	stwm  %r3,4(%r26)
-	stwm  %r4,4(%r26)
-	stwm  %r5,4(%r26)
-	stwm  %r6,4(%r26)
-	stwm  %r7,4(%r26)
-	stwm  %r8,4(%r26)
-	stwm  %r9,4(%r26)
-	stwm  %r10,4(%r26)
-	stwm  %r11,4(%r26)
-	stwm  %r12,4(%r26)
-	stwm  %r13,4(%r26)
-	stwm  %r14,4(%r26)
-	stwm  %r15,4(%r26)
-	stwm  %r16,4(%r26)
-	stwm  %r17,4(%r26)
-	stwm  %r18,4(%r26)
-	stwm  %r27,4(%r26)
-#ifdef FP
-	; jmp_buf may only have a 4 byte alignment, so handle FP stores
-	; very carefully.
-	fstds %fr12,-16(%r30)
-	ldw -16(%r30),%r28
-	stwm  %r28,4(%r26)
-	ldw -12(%r30),%r28
-	stwm  %r28,4(%r26) 
-	fstds %fr13,-16(%r30)
-	ldw -16(%r30),%r28
-	stwm  %r28,4(%r26)
-	ldw -12(%r30),%r28
-	stwm  %r28,4(%r26) 
-	fstds %fr14,-16(%r30)
-	ldw -16(%r30),%r28
-	stwm  %r28,4(%r26)
-	ldw -12(%r30),%r28
-	stwm  %r28,4(%r26) 
-	fstds %fr15,-16(%r30)
-	ldw -16(%r30),%r28
-	stwm  %r28,4(%r26)
-	ldw -12(%r30),%r28
-	stwm  %r28,4(%r26) 
-#endif
-
-	bv 0(%r2)
-	copy %r0,%r28
-	.EXIT
-	.PROCEND
-	.align 4
-	.EXPORT longjmp,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,RTNVAL=GR
-longjmp
-	.PROC
-	.CALLINFO FRAME=64,NO_CALLS,SAVE_SP,ENTRY_GR=3
-	.ENTRY
-	ldwm 4(%r26),%r30
-	ldwm 4(%r26),%r2
-	ldwm 4(%r26),%r3
-	ldwm 4(%r26),%r4
-	ldwm 4(%r26),%r5
-	ldwm 4(%r26),%r6
-	ldwm 4(%r26),%r7
-	ldwm 4(%r26),%r8
-	ldwm 4(%r26),%r9
-	ldwm 4(%r26),%r10
-	ldwm 4(%r26),%r11
-	ldwm 4(%r26),%r12
-	ldwm 4(%r26),%r13
-	ldwm 4(%r26),%r14
-	ldwm 4(%r26),%r15
-	ldwm 4(%r26),%r16
-	ldwm 4(%r26),%r17
-	ldwm 4(%r26),%r18
-	ldwm 4(%r26),%r27
-#ifdef FP
-	ldwm 4(%r26),%r28
-	stw %r28,-16(%r30)
-	ldwm 4(%r26),%r28
-	stw %r28,-12(%r30)
-	fldds -16(%r30),%fr12
-	ldwm 4(%r26),%r28
-	stw %r28,-16(%r30)
-	ldwm 4(%r26),%r28
-	stw %r28,-12(%r30)
-	fldds -16(%r30),%fr13
-	ldwm 4(%r26),%r28
-	stw %r28,-16(%r30)
-	ldwm 4(%r26),%r28
-	stw %r28,-12(%r30)
-	fldds -16(%r30),%fr14
-	ldwm 4(%r26),%r28
-	stw %r28,-16(%r30)
-	ldwm 4(%r26),%r28
-	stw %r28,-12(%r30)
-	fldds -16(%r30),%fr15
-#endif
-	comclr,<> %r0,%r25,%r0
-	ldi 1,%r25
-	bv 0(%r2)
-	copy %r25,%r28
-	.EXIT
-	.PROCEND
diff --git a/newlib/libc/machine/hppa/strcat.S b/newlib/libc/machine/hppa/strcat.S
deleted file mode 100644
index 9fcdd790f..000000000
--- a/newlib/libc/machine/hppa/strcat.S
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* HPUX_ID:	@(#) $Revision$	*/
-/*
- * strcat(s1, s2)
- *
- * Concatenate s2 on the end of s1.  S1's space must be large enough.
- * Return s1.
- */
-#include "DEFS.h"
-
-#define	d_addr  r26
-#define	s_addr  r25
-#define	tmp6    r24
-#define	tmp1    r19
-#define	tmp2    r20
-#define	tmp3    r21
-#define	tmp4    r22
-#define	tmp5	arg3
-#define	save	r1
-
-
-ENTRY(strcat)
-
-	comb,=		r0,s_addr,done	/* quit if s2=NULL */
-        copy      d_addr,ret0          /* The return value is the value of d_addr. DELAY SLOT*/
-
-/* First look for end of s1 (d_addr) */
-
-        extru       d_addr,31,2,tmp1   /* Extract the low two bits of the dest address. */
-	combt,=		tmp1,r0,dont_mask
-	dep		0,31,2,d_addr	/*set word alignment */
-	ldwm		4(d_addr),tmp2
-	sh3add		tmp1,r0,save	/* build mask based on tmp1 */
-	mtctl		save,11
-	zvdepi		-2,32,save
-	or		save,tmp2,tmp2
-	uxor,nbz	tmp2,r0,save
-search:
-	b,n		found_end	/* nullified under uxor conditions above and below */
-dont_mask:
-	ldwm		4(d_addr),tmp2
-	comib,tr	r0,r0,search
-	uxor,nbz	tmp2,r0,save
-
-found_end:				/* at this point d_addr points to word */
-	extru,<>	save,7,8,r0	/* following word with null */
-	addib,tr,n	-4,d_addr,begin_copy	/*set d_addr to end of s1 */
-	extru,<>	save,15,8,r0
-	addib,tr,n	-3,d_addr,begin_copy
-	extru,<>	save,23,8,r0
-	addi		-1,d_addr,d_addr
-	addi		-1,d_addr,d_addr
-
-
-begin_copy:
-
-        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
-        extru       d_addr,31,2,tmp6   /* Extract the low two bits of the destination address. */
-        sub,=       tmp6,tmp1,tmp3     /* Compute the shift quantity and don't branch if tmp6=tmp1. */
-        b           not_aligned        /* Not_aligned says that shifts Will be needed. */
-        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
-/* aligned */
-
-	combt,=		tmp6,r0,skip_mask
-        ldwm        	4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT) */
-	sh3add		tmp6,r0,save
-	mtctl		save,r11
-	zvdepi		-2,32,save
-	or		save,tmp1,tmp1
-	uxor,nbz	tmp1,r0,save
-	b,n		first_null	/* special case: null in first word */
-	b,n		skip_mask2
-
-chunks:
-	b,n		null_found	/* delay slot for uxor below */
-
-skip_mask2:
-	stbys,b,m	tmp1,4(d_addr)
-	ldwm		4(s_addr),tmp1
-skip_mask:
-	comib,tr	0,0,chunks
-	uxor,nbz	tmp1,r0,save
-
-/* Begin non_aligned code.  */
-
-not_aligned:
-        sh3add,>=       tmp3,r0,tmp4        /* compute the shift amt.and skip load if tmp6 > tmp1. */
-        ldwm         	4(0,s_addr),tmp1    /* load up the first word from the source. tmp1 = *s_addr++ */
-        ldwm        	4(0,s_addr),tmp2    /* get either first or second word from source.  */
-	combt,=		tmp6,r0,chunk2      /* don't mask if whole word is valid */
-        mtctl        	tmp4,11             /* load the shift count into cr11 = shift count register. */
-        vshd        	tmp1,tmp2,tmp3      /* position data !  (delay slot) */
-	sh3add		tmp6,r0,save  	    /* setup r1 */
-	mtctl		save,r11	    /* set-up cr11 for mask */
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-	uxor,nbz	tmp3,r0,save
-	b,n		first_null2
-	b		did_mask
-        mtctl        	tmp4,11            /* re-load the shift count into cr11 */
-
-chunk2:
-	vshd		tmp1,tmp2,tmp3
-	uxor,nbz	tmp3, r0, save
-	b,n		null_found
-did_mask:
-        stbys,b,m   	tmp3,4(0,d_addr)    /* store !  */
-
-        ldwm        	4(0,s_addr),tmp1    /* get next word !  */
-        vshd        	tmp2,tmp1,tmp3      /* position data !  */
-	uxor,nbz	tmp3, r0, save
-	b,n		null_found
-	stwm		tmp3,4(d_addr)
-	comib,tr	0,0,chunk2
-	ldwm		4(s_addr),tmp2
-
-
-null_found:				/* adjust d_addr and store final word */
-
-	extru,<>	save,7,8,r0
-	addib,tr,n	1,d_addr,store_final
-	extru,<>	save,15,8,r0
-	addib,tr,n	2,d_addr,store_final
-	extru,<> 	save,23,8,r0
-	addib,tr	3,d_addr,store_final2
-	bv		0(r2)
-	stw		save,0(d_addr)
-
-store_final:
-	bv		0(r2)
-store_final2:
-	stbys,e		save,0(d_addr) 	/* delay slot */
-
-first_null:			/* null found in first word of aligned (wrt d_addr) */
-	addi		-4,s_addr,s_addr
-	ldbx		tmp6(s_addr),tmp4
-	add		tmp6,s_addr,s_addr
-	comib,=		0,tmp4,done
-	stbs,ma		tmp4,1(d_addr)
-	ldbs		1(s_addr),tmp4
-	comib,=		0,tmp4,done
-	stbs,ma		tmp4,1(d_addr)
-	bv		0(r2)		/* done */
-	stbs		0,0(d_addr)
-
-first_null2:	/* null found in first word of non-aligned (wrt d_addr) */
-	addibt,=	-1,tmp6,check3	/* check last 3 bytes of word */
-	extru   	save,15,8,tmp4
-	addibt,=,n	-1,tmp6,check2	/* check last 2 bytes */
-	bv		0(r2)
-	stbys,b		save, 0(d_addr)
-
-check3:
-	combt,=		tmp4,r0,done
-	stbs,ma		tmp4,1(d_addr)
-check2:
-	extru,<>	save,23,8,tmp4
-	bv		0(r2)
-	stbs,ma		tmp4,1(d_addr)
-	bv		0(r2)
-	stbs		r0,0(d_addr)
-
-done:
-EXIT(strcat)
diff --git a/newlib/libc/machine/hppa/strcmp.S b/newlib/libc/machine/hppa/strcmp.S
deleted file mode 100644
index 007a64849..000000000
--- a/newlib/libc/machine/hppa/strcmp.S
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/*
-
-	strcmp
-
-	Jerry Huck
-	Edgar Circenis
-
-*/
-/* 
- * strcmp(s1, s2)
- *
- * returns integer: < 0 iff s1 lexicographically less than s2
- * 		    > 0 iff s1 lexicographically greater than s2
- * 		    = 0 iff s1 lexicographically equal to s2
- */
-
-#include "DEFS.h"
-
-#define s1	 26
-#define s2	 25
-#define tmp1     19
-#define s2word   20
-#define tmp3     21
-#define tmp7     22
-#define s1word	 23
-#define save	  1
-#define tmp6	 24
-#define tmp5	 28
-
-ENTRY(strcmp)
-	comb,=,n   s1,s2,samestring
-	comib,=,n  0,s1,s1isnull
-        comib,=,n  0,s2,s2isnull
-/* Hope for word alignment.  Pick up low two bits of each adress */
-        extru,<>   s1,31,2,tmp1
-        ldwm       4(s1),s1word
-        dep,=      s2,29,2,tmp1
-        b,n        case_analysis
-
-/* Start looping until null is found in s1 or they mis-compare */
-loop:
-        ldwm       4(s2),s2word
-loop_plus:
-        uxor,nbz   s1word,r0,r0   /* Null in this? */
-        b,n        nullins1
-        comb,=,n   s1word,s2word,loop
-        ldwm       4(s1),s1word
-
-/* The words do not compare equal and s1 does not have a null.
-   Need to treat words as unsigned and generate either a positive
-   or negative return value */
-wordcomparereturn:
-        comclr,>>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if greater*/
-        ldi        -2,ret0           /*Set ret0 to -2 when less */
-        bv         r0(rp)
-        addi       1,ret0,ret0           /*Fix return value to be -1 or +1 */
-
-/* s1 has a null.  s2 has not been checked. */
-nullins1:
-        /*If s2 has no nulls this is simple, but assume that it might
-          and fix up s1 to allow the word comparision to work by
-          scanning s1 and duplicating all the bytes in s2 below that byte into
-          the remainder of s1.  A remainder only exists if the zero byte
-          is found in the upper three bytes */
-        extru,<>   s1word,7,8,r0         /*in the first byte? */
-        dep,tr     s2word,31,24,s1word   /*copy low 3 bytes of *s2 into *s1 */
-        extru,<>   s1word,15,8,r0         /*in the second byte? */
-        dep,tr     s2word,31,16,s1word   /*copy low 2 bytes of *s2 into *s1 */
-        extru,<>   s1word,23,8,r0         /*in the third byte? */
-        dep        s2word,31,8,s1word   /*copy low 1 byte of *s2 into *s1 */
-        /* Do the normal unsigned compare and return */
-        comclr,<>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if not equal */
-	bv,n	   r0(rp)
-        comclr,>>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if greater*/
-        ldi        -2,ret0           /*Set ret0 to -2 when less */
-        bv         r0(rp)
-        addi       1,ret0,ret0           /*Fix return value to be -1 or +1 */
-
-/* s1 and s2 are the same string and therefore equal */
-samestring:
-        bv      r0(rp)
-        copy    r0,ret0
-/* s1 is null.  Treat as string of nulls.  Therefore return
-   the negative of s2's first byte.  s2 cannot be zero. */
-s1isnull:
-	ldbs	0(0,s2),ret0
-        bv      r0(rp)
-	sub	0,ret0,ret0
-/* s2 is null.  Treat as string of nulls.  Therefore return 
-   s1's first byte.  s1 cannot be zero. */
-s2isnull:
-        bv      r0(rp)
-	ldbs	0(0,s1),ret0
-
-case_analysis:
-	blr	tmp1,r0
-	nop
-
-	/*
-	   Case statement for non-aligned cases (we've already
-	   checked the aligned case.
-	   NOTE: for non-aligned cases, the absolute shift value
-	   gets loaded into tmp3.
-	*/
-
-				/* S2 S1 */
-	nop			/* 00 00 can't happen */
-	nop
-	b	shifts2		/* 00 01 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	b	shifts2		/* 00 10 */
-	ldi	16,tmp3		/* load shift count (delay slot) */
-	b	shifts2		/* 00 11 */
-	ldi	24,tmp3		/* load shift count (delay slot) */
-	b	shifts1_0	/* 01 00 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	b	eq_align1	/* 01 01 */
-	ldbs,ma	1(s1),s1word
-	b	shifts2		/* 01 10 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	b	shifts2		/* 01 11 */
-	ldi	16,tmp3		/* load shift count (delay slot) */
-	b	shifts1_0	/* 10 00 */
-	ldi	16,tmp3		/* load shift count (delay slot) */
-	b	shifts1		/* 10 01 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	b	eq_align2	/* 10 10 */
-	ldhs,ma	2(s1),s1word
-	b	shifts2		/* 10 11 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	b	shifts1_0	/* 11 00 */
-	ldi	24,tmp3		/* load shift count (delay slot) */
-	b	shifts1		/* 11 01 */
-	ldi	16,tmp3		/* load shift count (delay slot) */
-	b	shifts1		/* 11 10 */
-	ldi	8,tmp3		/* load shift count (delay slot) */
-	ldbs,ma	1(s1),s1word	/* 11 11 */
-	ldbs,ma 1(s2),s2word
-	sub,=	s1word,s2word,ret0	/* if not equal, we can return now */
-	bv,n	r0(rp)
-	comclr,<>	s1word,r0,ret0
-	bv,n	r0(rp)			
-	b	loop			/* fall into main loop */
-	ldwm	4(s1),s1word
-
-eq_align1:
-	ldbs,ma 1(s2),s2word
-	sub,=	s1word,s2word,ret0	/* if not equal, we can return now */
-	bv,n	r0(rp)
-	comclr,<>	s1word,r0,ret0
-	bv,n	r0(rp)			
-	/* fall through to half-word aligned case */
-	ldhs,ma	2(s1),s1word		/* load next halfword */
-eq_align2:
-	ldhs,ma	2(s2),s2word		/* load next halfword */
-	/* form the mask: 0xffff0000 and mask leading nulls in s1word and s2word
-	   so that we can fall into the main loop with word aligned data */
-	ldi	16,save	
-	mtctl	save,r11
-	zvdepi	-2,32,save
-	or	save,s1word,s1word
-	b	loop_plus		/* fall into main loop */
-	or	save,s2word,s2word
-
-/* s2's alignment is greater than s1's alignment, so we will shift s1 */
-shifts1_0:
-	addi	-4,s1,s1		/* fix up s1 due to earlier read */
-shifts1:
-        extru   s1,31,2,tmp1
-        extru   s2,31,2,tmp5
-	dep	r0,31,2,s1		/* Compute word address of s1 */
-	dep	r0,31,2,s2		/* Compute word address of s2 */
-	ldwm	4(s1),s1word		/* get first word of s1 */
-	ldwm	4(s2),s2word		/* get first word of s2 */
-	combt,=,n	r0,tmp1,masks2	/* Do we need to mask beginning of s1 */
-	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
-	mtctl	save,r11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word
-masks2:
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,r11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s2word,s2word
-	ldi	-1,tmp7			/* load tmp7 with 0xffffffff */
-	mtctl	tmp3,r11		/* Move shift amount to CR11 */
-more:	uxor,nbz	s1word,r0,r0	/* Is there a null in s1? */
-	b	ends1
-	vshd	tmp7,s1word,save
-	combf,=,n	save,s2word,cmps1
-	ldwm	4(s1),tmp7
-	ldwm	4(s2),s2word
-	uxor,nbz	tmp7,r0,r0	/* is there a null in s1? */
-	b	ends1_0
-	vshd	s1word,tmp7,save
-	combf,=,n	save,s2word,cmps1
-	ldwm	4(s1),s1word
-	b	more
-	ldwm	4(s2),s2word
-
-cmps1:	movb,tr		save,s1word,wordcomparereturn
-	nop
-
-ends1_0:
-	copy	tmp7,s1word			/* move tmp7 to s1word */
-ends1:
-	combf,=,n	save,s2word,nullins1	/* branch if no match */
-	copy	save,s1word			/* delay slot */
-/* At this point, we know that we've read a null */
-/* from s1, so we can't read more from s1 */
-	uxor,nbz	save,r0,r0		/* are the strings equal? */
-	b,n	samestring
-	vshd	s1word,r0,s1word
-	b	nullins1
-	ldwm	4(s2),s2word
-
-/* s1's alignment is greater than s2's alignment, so we will shift s2 */
-shifts2:
-        extru   s1,31,2,tmp1
-        extru   s2,31,2,tmp5
-	dep	r0,31,2,s1		/* Compute word address of s1 */
-	dep	r0,31,2,s2		/* Compute word address of s2 */
-	ldwm	4(s2),s2word		/* get first word of s2 */
-	ldwm	4(s1),s1word		/* get first word of s1 */
-	combt,=,n	r0,tmp5,masks1	/* Do we need to mask beginning of s2 */
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,r11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s2word,s2word
-masks1:
-	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
-	mtctl	save,r11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word
-	ldi	-1,tmp7			/* load tmp7 with 0xffffffff */
-	mtctl	tmp3,r11		/* Move shift amount to CR11 */
-more1:	uxor,nbz	s2word,r0,r0	/* is there a null in s2? */
-	b	ends2
-	vshd	tmp7,s2word,save
-	combf,=,n	s1word,save,cmps2
-	ldwm	4(s2),tmp7
-	ldwm	4(s1),s1word
-	uxor,nbz	tmp7,r0,r0	/* is there a null in s2? */
-	b	ends2_0
-	vshd	s2word,tmp7,save
-	combf,=,n	s1word,save,cmps2
-	ldwm	4(s2),s2word
-	b	more1
-	ldwm	4(s1),s1word
-
-cmps2:	movb,tr		save,s2word,wordcomparereturn
-	nop
-
-ends2_0:
-	copy	tmp7,s2word			/* move tmp7 to s2word */
-ends2:
-	combf,=,n	s1word,save,nullins1	/* branch if no match */
-	copy	save,s2word			/* delay slot */
-/* At this point, we know that we've read a null */
-/* from s2, so we can't read more from s2 */
-	uxor,nbz	save,r0,r0		/* are the strings equal? */
-	b,n	samestring
-	vshd	s2word,r0,s2word
-	b	nullins1
-	ldwm	4(s1),s1word
-
-EXIT(strcmp)
diff --git a/newlib/libc/machine/hppa/strcpy.S b/newlib/libc/machine/hppa/strcpy.S
deleted file mode 100644
index 3068cd5e1..000000000
--- a/newlib/libc/machine/hppa/strcpy.S
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/*
-	A faster strcpy.
-
-	by
-
-	Jerry Huck (aligned case)
-	Daryl Odnert (equal-alignment case)
-	Edgar Circenis (non-aligned case)
-*/
-/*
- * strcpy(s1, s2)
- *
- * Copy string s2 to s1.  s1 must be large enough.
- * return s1
- */
-
-#include "DEFS.h"
-
-#define	d_addr		r26
-#define	s_addr		r25
-#define	tmp6		r24
-#define	tmp1		r19
-#define evenside	r19
-#define	tmp2		r20
-#define oddside		r20
-#define	tmp3		r21
-#define	tmp4		r22
-#define	tmp5		arg3
-#define	save		r1
-
-
-ENTRY(strcpy)
-/* Do some quick alignment checking on and fast path both word aligned */
-        extru,<>   s_addr,31,2,tmp6    /*Is source word aligned? */
-        ldwm       4(0,s_addr),oddside /*Assume yes and guess that it
-                                          is double-word aligned. */
-        dep,=      d_addr,29,2,tmp6    /*Is target word aligned? */
-        b          case_analysis
-	copy       d_addr,ret0
-/* Both are aligned.  First source word already loaded assuming that
-   source was oddword aligned.  Fall through (therefore fastest) code
-   shuffles the registers to join the main loop */
-bothaligned:
-	bb,>=    s_addr,29,twoatatime  /*Branch if source was odd aligned*/
-	uxor,nbz oddside,r0,save
-
-/* Even aligned source.  save holds that operand.
-   Do one iteration of the main copy loop juggling the registers to avoid
-   one copy. */
-	b,n	 nullfound
-	ldwm     4(s_addr),oddside
-	stwm     save,4(d_addr)
-	uxor,nbz oddside,r0,save
-	b,n      nullfound
-        ldwm     4(s_addr),evenside
-        stwm     oddside,4(d_addr)
-        uxor,nbz evenside,r0,save
-        b,n      nullfound
-        ldwm     4(s_addr),oddside
-
-/* Main loop body.  Entry expects evenside still to be stored, oddside
-   just loaded. */
-loop:
-        stwm     evenside,4(d_addr)
-        uxor,nbz oddside,r0,save
-
-/* mid loop entry */
-twoatatime:
-        b,n      nullfound
-        ldwm     4(s_addr),evenside
-        stwm     oddside,4(d_addr)
-        uxor,sbz evenside,r0,save
-        b        loop
-        ldwm     4(s_addr),oddside
-
-/* fall through when null found in evenside.  oddside actually loaded */
-nullfound:				/* adjust d_addr and store final word */
-
-	extru,<>	save,7,8,r0         /* pick up leftmost byte */
-	addib,tr,n	1,d_addr,store_final
-	extru,<>	save,15,8,r0
-	addib,tr,n	2,d_addr,store_final
-	extru,<> 	save,23,8,r0
-	addib,tr	3,d_addr,store_final2
-	bv		0(rp)
-	stw		save,0(d_addr)
-
-store_final:
-	bv		0(rp)
-store_final2:
-	stbys,e		save,0(d_addr) 	/* delay slot */
-	
-case_analysis:
-
-        blr         tmp6,r0
-        nop
-
-	/* NOTE: the delay slots for the non-aligned cases load a   */
-	/* shift quantity which is TGT-SRC into tmp3.               */
-        /* Note also, the case for both strings being word aligned  */
-	/* is already checked before the BLR is executed, so that   */
-	/* case can never occur.                                    */
-
-                                       /* TGT SRC */
-        nop                            /* 00  00  can't happen */
-        nop
-        b           neg_aligned_copy   /* 00  01  */
-	ldi         -1,tmp3            /* load shift quantity. delay slot */
-        b           neg_aligned_copy   /* 00  10  */
-	ldi         -2,tmp3            /* load shift quantity. delay slot */
-        b           neg_aligned_copy   /* 00  11  */
-	ldi         -3,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy0  /* 01  00  */
-	ldi         1,tmp3            /* load shift quantity. delay slot */
-        b           equal_alignment_1  /* 01  01  */
-        ldbs,ma     1(s_addr),tmp1
-        b           neg_aligned_copy   /* 01  10  */
-	ldi         -1,tmp3            /* load shift quantity. delay slot */
-        b           neg_aligned_copy   /* 01  11  */
-	ldi         -2,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy0  /* 10  00  */
-	ldi         2,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy   /* 10  01  */
-	ldi         1,tmp3            /* load shift quantity. delay slot */
-        b           equal_alignment_2  /* 10  10  */
-        ldhs,ma     2(s_addr),tmp1
-        b           neg_aligned_copy   /* 10  11  */
-	ldi         -1,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy0  /* 11  00  */
-	ldi         3,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy   /* 11  01  */
-	ldi         2,tmp3            /* load shift quantity. delay slot */
-        b           pos_aligned_copy   /* 11  10  */
-	ldi         1,tmp3            /* load shift quantity. delay slot */
-        ldbs,ma     1(s_addr),tmp1     /* 11  11  */
-        comiclr,<>  r0,tmp1,r0
-        bv          0(rp)              /* return if 1st byte was null */
-        stbs,ma     tmp1,1(d_addr)     /* store a byte to dst string  */
-        b           bothaligned       /* can now goto word_aligned   */
-        ldwm        4(s_addr),oddside     /* load next word of source    */
-
-equal_alignment_1:
-        comiclr,<>  r0,tmp1,r0      /* nullify next if tmp1 <> 0  */
-        bv          0(rp)           /* return if null byte found  */
-        stbs,ma     tmp1,1(d_addr)  /* store a byte to dst string */
-        ldhs,ma     2(s_addr),tmp1  /* load next halfword         */
-equal_alignment_2:
-        extru,<>    tmp1,23,8,tmp6  /* look at left byte of halfword */
-        bv          0(rp)           /* return if 1st byte was null */
-        stbs,ma     tmp6,1(d_addr)
-        extru,<>    tmp1,31,8,r0
-        bv          0(rp)           /* return if 2nd byte was null */
-        stbs,ma     tmp1,1(d_addr)
-        b           bothaligned
-        ldwm        4(s_addr),oddside  /* load next word              */
-
-/* source and destination are not aligned, so we do it the hard way. */
-
-/* target alignment is greater than source alignment */
-pos_aligned_copy0:
-	addi		-4,s_addr,s_addr
-pos_aligned_copy:
-        extru       d_addr,31,2,tmp6   /* Extract low 2 bits of the dest addr */
-        extru       s_addr,31,2,tmp1   /* Extract low 2 bits of the src addr */
-        dep         r0,31,2,s_addr     /* Compute word address of the source. */
-        sh3add		tmp3,r0,tmp4        /* compute shift amt */
-        ldwm        	4(0,s_addr),tmp2    /* get 1st source word */
-	sh3add		tmp1,r0,save  	    /* setup mask shift amount */
-	mtctl		save,r11	    /* set-up cr11 for mask */
-	zvdepi		-2,32,save	    /* create mask */
-	or		save,tmp2,tmp2	    /* mask unused bytes in src */
-	ldi		-1,tmp1		    /* load tmp1 with 0xffffffff */
-        mtctl        	tmp4,r11            /* shift count -> shift count reg */
-        vshd        	tmp1,tmp2,tmp3      /* position data ! */
-	uxor,nbz	tmp3,r0,save
-	b,n		first_null
-	uxor,nbz	tmp2,r0,save
-	b		nullfound1
-        mtctl        	tmp4,r11            /* re-load shift cnt (delay slot) */
-	b		loop_entry
-        ldwm        	4(0,s_addr),tmp1    /* get next word. delay slot */
-
-neg_aligned_copy:
-        extru       d_addr,31,2,tmp6   /* Extract low 2 bits of the dest addr */
-	extru	    s_addr,31,2,tmp2   /* Extract low 2 bits of the src addr */
-        dep         r0,31,2,s_addr     /* Compute word address of the source. */
-        sh3add		tmp3,r0,tmp4        /* compute shift amt */
-        ldwm         	4(0,s_addr),tmp1    /* load first word from source. */
-/* check to see if next word can be read safely */
-	sh3add		tmp2,r0,save
-        mtctl        	save,r11            /* shift count -> shift count reg */
-	zvdepi		-2,32,save
-	or		save, tmp1, tmp1
-	uxor,nbz	tmp1,r0,save	    /* any nulls in first word? */
-	b		first_null0
-	mtctl		tmp4,r11
-        ldwm        	4(0,s_addr),tmp2    /* load second word from source */
-	combt,=		tmp6,r0,chunk1      /* don't mask if whole word valid */
-        vshd        	tmp1,tmp2,tmp3      /* position data ! */
-	sh3add		tmp6,r0,save  	    /* setup r1 */
-	mtctl		save,r11	    /* set-up cr11 for mask */
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-	uxor,nbz	tmp3,r0,save
-	b,n		first_null
-	uxor,nbz	tmp2,r0,save
-	b		nullfound1
-        mtctl        	tmp4,r11            /* re-load shift cnt (delay slot) */
-	b		loop_entry
-        ldwm        	4(0,s_addr),tmp1    /* get next word. delay slot */
-
-chunk1:
-	uxor,nbz	tmp2,r0,save
-	b		nullfound0
-	vshd		tmp1,tmp2,tmp3
-did_mask:
-        ldwm        	4(0,s_addr),tmp1    /* get next word !  */
-loop_entry:
-        stbys,b,m   	tmp3,4(0,d_addr)    /* store !  */
-
-	uxor,nbz	tmp1, r0, save
-	b		nullfound2
-        vshd        	tmp2,tmp1,tmp3      /* position data !  */
-	ldwm		4(s_addr),tmp2
-	stwm		tmp3,4(d_addr)
-	uxor,sbz	tmp2,r0,save
-	b		did_mask
-nullfound0:
-	vshd		tmp1,tmp2,tmp3	    /* delay slot */
-	uxor,nbz	tmp3,r0,save
-	b,n		nullfound
-nullfound1:
-	stbys,b,m	tmp3,4(0,d_addr)
-	b		nullfound
-	vshd		tmp2,r0,save	    /* delay slot */
-
-nullfound2:
-	uxor,nbz	tmp3,r0,save
-	b,n		nullfound
-	stwm		tmp3,4(d_addr)
-	b		nullfound
-	/* notice that delay slot is in next routine */
-
-first_null0:	/* null found in first word of non-aligned (wrt d_addr) */
-	vshd		tmp1,r0,save	    /* delay slot */
-	combt,=		tmp6,r0,check4
-	extru		save,7,8,tmp4
-first_null:
-	addibt,=	-1,tmp6,check3	/* check last 3 bytes of word */
-	extru   	save,15,8,tmp4
-	addibt,=,n	-1,tmp6,check2	/* check last 2 bytes */
-	bv		0(rp)		/* null in last byte--store and exit */
-	stbys,b		save, 0(d_addr)
-
-check4:
-	combt,=		tmp4,r0,done
-	stbs,ma		tmp4,1(d_addr)
-	extru,<>	save,15,8,tmp4
-check3:
-	combt,=		tmp4,r0,done
-	stbs,ma		tmp4,1(d_addr)
-check2:
-	extru,<>	save,23,8,tmp4
-	bv		0(rp)
-	stbs,ma		tmp4,1(d_addr)
-	bv		0(rp)
-	stbs		r0,0(d_addr)
-
-done:    
-EXIT(strcpy)
diff --git a/newlib/libc/machine/hppa/strlen.S b/newlib/libc/machine/hppa/strlen.S
deleted file mode 100644
index 12e9ef2a9..000000000
--- a/newlib/libc/machine/hppa/strlen.S
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* HPUX_ID = "@(#) $Revision$" */
-/* strlen(s): Return length of string s */
-
-#define start   arg0
-#define end     ret0
-#define tmp1    arg1
-#define tmp2    arg2
-
-#include "DEFS.h"
-
-ENTRY(strlen)
-        movb,=,n        start,end,$null_ptr
-        depi            0,31,2,end
-        comb,<>         start,end,$not_aligned
-        ldws,ma         4(end),tmp1
-        comib,tr        0,0,$loop       /* avoid INDIGO two register interlock */
-        uxor,nbz        0,tmp1,0
-$not_aligned:
-        /*
-        ;       Tricky code.  The problem is that the value of of the word
-        ;       including the start of the string has some garbage bytes that
-        ;       may be 0.  We don't want them to stop the string scan.  So
-        ;       we make those bytes non-zero (and any old non-zero value
-        ;       will do).  Notice that the end pointer has been rounded
-        ;       down to a word boundary, and then incremented to the next
-        ;       word by the time we get here.  Therefore, (start-end) has
-        ;       one of the values (-3, -2, or -1).  Use uaddcm to do the
-        ;       subtraction (instead of sub), and the result will be
-        ;       (-4, -3, or -2).  Multiply this by 8, and put into the
-        ;       shift register (which truncates to the last 5 bits) and
-        ;       the value will be (0, 8, or 16).  Use this as a bit position,
-        ;       and drop a mask down into tmp1.  All the garbage bytes will
-        ;       have at least 1 bit affected by the vdepi, so all the garbage
-        ;       in this first word will be non-zero garbage.
-        */
-        uaddcm          start,end,tmp2  /*  tmp2 <- {  -4,  -3,  -2 } */
-        sh3add          tmp2,0,tmp2     /*  tmp2 <- { -32, -24, -16 } */
-        mtsar           tmp2            /*  sar  <- {   0,   8,  16 } */
-        vdepi           -1,32,tmp1
-        uxor,nbz        0,tmp1,0
-$loop:
-        b,n             $end_loop
-        ldws,ma         4(end),tmp1
-        comib,tr        0,0,$loop       /* avoid INDIGO two register interlock */
-        uxor,nbz        0,tmp1,0
-$end_loop:
-        /*       adjust the end pointer to one past the end of the string */
-        extru,<>        tmp1,7,8,0
-        addib,tr,n      -3,end,$out
-        extru,<>        tmp1,15,8,0
-        addib,tr,n      -2,end,$out
-        extru,<>        tmp1,23,8,0
-        addi            -1,end,end
-$out:
-        bv              0(rp)
-        /*
-        ;       tricky code.  the end pointer is just beyond the terminating
-        ;       null byte, so the length is (end-start-1).  use uaddcm
-        ;       to do this in 1 instruction
-        */
-        uaddcm          end,start,ret0
-
-$null_ptr:
-EXIT(strlen)
diff --git a/newlib/libc/machine/hppa/strncat.S b/newlib/libc/machine/hppa/strncat.S
deleted file mode 100644
index 04bd156c9..000000000
--- a/newlib/libc/machine/hppa/strncat.S
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/*HPUX_ID:	@(#) $Revision$	*/
-/* strncat(s1,s2,n) : concatonate at most n characters from s2 onto s1 */
-
-#include "DEFS.h"
-
-#define	d_addr  r26
-#define	s_addr  r25
-#define	count   r24
-#define	tmp1    r19
-#define	tmp2    r20
-#define	tmp3    r21
-#define	tmp4    r22
-#define	tmp5	arg3
-#define tmp6	r31
-#define	save	r1
-#define tmp7	ret1	/* source offset-- reset to orig source addr if not aligned */
-
-
-ENTRY(strncat)
-
-	comb,=		r0,s_addr,quit	/* quit if s2=NULL */
-        copy      d_addr,ret0          /* The return value is the value of d_addr. DELAY SLOT*/
-
-/* First look for end of s1 (d_addr) */
-
-        extru       d_addr,31,2,tmp1   /* Extract the low two bits of the dest address. */
-	combt,=		tmp1,r0,dont_mask
-	dep		0,31,2,d_addr	/*set word alignment */
-	ldwm		4(d_addr),tmp2
-	sh3add		tmp1,r0,save	/* build mask based on tmp1 */
-	mtctl		save,11
-	zvdepi		-2,32,save
-	or		save,tmp2,tmp2
-	uxor,nbz	tmp2,r0,save
-search:
-	b,n		found_end	/* nullified under uxor conditions above and below */
-dont_mask:
-	ldwm		4(d_addr),tmp2
-	comib,tr	r0,r0,search
-	uxor,nbz	tmp2,r0,save
-
-found_end:				/* at this point d_addr points to word */
-	extru,<>	save,7,8,r0	/* following word with null */
-	addib,tr,n	-4,d_addr,begin_copy	/*set d_addr to end of s1 */
-	extru,<>	save,15,8,r0
-	addib,tr,n	-3,d_addr,begin_copy
-	extru,<>	save,23,8,r0
-	addi		-1,d_addr,d_addr
-	addi		-1,d_addr,d_addr
-
-
-begin_copy:
-        addibt,<,n  -4,count,byteloop     /* If count is <= 4 don't get fancy.*/
-
-        extru       s_addr,31,2,tmp4   /* Extract the low two bits of the source address.*/
-        extru       d_addr,31,2,tmp5   /* Extract the low two bits of the destination address.*/
-        add         count,tmp5,count   /* pre increment the count by the byte address so that the count is*/
-	copy		s_addr,tmp6	/* save original s_addr in case we find null in first word */
-	copy	     s_addr, tmp7	/* save s_addr in case we find null before first store */
-        comb,<>       tmp5,tmp4,not_aligned /* branch if tmp5<>tmp4. */
-        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT.*/
-/* aligned*/
-	combt,=		tmp5,r0,skip_mask
-        ldwm        4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT)*/
-	sh3add		tmp5,r0,save	/* compute mask in save*/
-	mtctl		save,11
-	zvdepi		-2,32,save
-	or		save,tmp1,tmp1  /* or mask with data*/
-	uxor,nbz	tmp1,r0,save 	/* check for null*/
-	b,n		null1
-	addibt,<	-4,count,back_porch
-        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
-
-chunks:
-	ldwm		4(0,s_addr),tmp1 /* get a word*/
-
-skip_mask:
-	uxor,nbz	tmp1,r0,save 	/* check for null*/
-	b,n		align_null1
-	addibf,<	-4,count,chunks
-        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
-
-back_porch:				   /* last word to store*/
-         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done !*/
-         ldws        0(s_addr),tmp1     /* load up the back_porch*/
-	 sh3add		count,r0, save	/* setup right mask based on count*/
-	 mtctl		save,r11
-	 zvdepi		-2,32,save	/*save now has left-hand mask*/
-	 uaddcm		r0,save,save	/*form right hand mask */
-	 or		tmp1,save,tmp1	/*and insert data*/
-	 uxor,nbz	tmp1,r0,save	/* check for null*/
-	 b,n 		null2
-         add         d_addr,count,d_addr/* final store address  is +1 too high !*/
-	 b		done
-	 stbys,e	tmp1,0(d_addr)	/* done */
-
-/* Begin non_aligned code. */
-not_aligned:
-        sub,>=       tmp5,tmp4,tmp6     /* compute the shift amt.and skip load if tmp5 > tmp4.*/
-        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++*/
-        zdep         tmp6,28,29,tmp4    /* compute the number of bits to shift */
-        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register.*/
-        addibt,<,n   -4,count,chkchnk2 /* first step in pre adjustment of count for looping.*/
-
-        ldwm        4(0,s_addr),tmp2    /* get either first or second word from source. */
-	combt,=		tmp5,r0,skip_mask4 /* don't mask if whole word is valid*/
-        vshd        tmp1,tmp2,tmp3      /* position data !  (delay slot)*/
-	sh3add		tmp5,r0,save	/* setup r1*/
-	mtctl		save,r11	/* setup mask in save*/
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-        mtctl           tmp4,11            /* re-load the shift count into cr11 */
-
-skip_mask4:
-	uxor,nbz	tmp3, r0, save
-	b,n		null4		/* special case for first word */
-	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
-	copy		r0, tmp7	/* zero out tmp7 so we don't try to use original s_addr anymore */
-	b		continue
-        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
-
-chunk2:
-        ldwm        4(0,s_addr),tmp2
-        vshd        tmp1,tmp2,tmp3 
-
-skip_mask2:
-	uxor,nbz	tmp3, r0, save
-	b,n		null3
-        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
-
-continue:
-        ldwm        4(0,s_addr),tmp1    /* get 2nd word ! */
-        vshd        tmp2,tmp1,tmp3      /* position data ! */
-	uxor,nbz	tmp3, r0, save
-	b,n		null3
-
-        addibf,<    -8,count,chunk2    /* If count is still >= 8 do another loop.*/
-        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
-
-chkchnk2:
-        addibt,<,n  4,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0)*/
-
-subchnk2: /* we have less than 8 chars to copy*/
-
-        ldwm        4(0,s_addr),tmp2    /* get next word !*/
-	combt,=		tmp5,r0,skip_mask3
-        vshd        tmp1,tmp2,tmp3      /* position data !*/
-	sh3add		tmp5,r0,save	/* setup r1*/
-	mtctl		save,r11	/* setup mask in save*/
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-	mtctl		tmp4,11		/* restore shift value again */
-skip_mask3:
-	uxor,nbz	tmp3,r0,save
-	b,n		null3
-	copy		r0,tmp5   /* zero out tmp5 so null3 does correct alignment */
-	copy		r0,tmp7	  /* zero out tmp7 so we don't use orignal s_addr since no longer valid */
-	b		bp_1 /* we now have less than 4 bytes to move*/
-        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
-
-bp_0:    
-	copy		tmp1,tmp2	/* switch registers for shift process */
-	addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done */
-
-bp_1:
-        ldwm        4(0,s_addr),tmp1    /* get final word !        */
-        vshd        tmp2,tmp1,tmp3      /* position data !*/
-	uxor,nbz	tmp3,r0,save	/* if no-byte-zero */
-	b,n		bp_null		/* don't goto no_null-find which null instead */
-no_null:
-	add	    d_addr,count,d_addr	/* set up d_addr for stbys,e */
-	b		done		/* were done*/
-        stbys,e     tmp3,0(0,d_addr)    /* store the data !*/
-
-/* here we do ye old byte-at-a-time moves.*/
-align_null1:
-	b	byteloop
-	addi	-4,s_addr,s_addr
-null1:
-	copy		tmp6,s_addr		/* restore orig s_addr (aligned only) */
-byteloop:
-	addibt,=     4,count,done
-null2:
-        ldbs,ma     1(s_addr),tmp1
-encore:
-	combt,=,n	tmp1,r0, done
-        stbs,ma     tmp1,1(d_addr) 
-        addibf,=,n  -1,count,encore
-        ldbs,ma     1(s_addr),tmp1
-	b,n		done
-
-bp_null:
-	addi	-4,count,count		/* fudge count 'cause byteloop will re-increment */
-
-null3:	/* not_aligned case reset s_addr and finish byte-wise */
-	combt,=,n  r0,tmp7,null3a	/* if tmp7 is not valid address then branch below */
-	b 	byteloop		  	/* otherwise reset s_addr to tmp7 and finish */
-	copy 	tmp7, s_addr
-
-null3a: /* right shift target */
-	addibt,<,n  0,tmp6,null3b	/* if left shifting */
-	sub	r0,tmp6,tmp6		/* do null3b code */
-	addi	-4,tmp6,tmp6
-	b	byteloop
-	add	tmp6,s_addr,s_addr	/* reset s_addr by 4 + shift_amt */
-
-null3b:
-	subi	-8,tmp6,tmp6
-	add	tmp5,tmp6,tmp6  /* adjust by the dest offset if this is our first store */
-	b	byteloop
-	add	tmp6,s_addr,s_addr	/* adjust s_addr by (8-shift_amt-dest_off) */
-
-null4:
-	add,>	tmp6,r0,tmp6		/* if left shift */
-	b,n	null3			/* then do null3 */
-	b	byteloop
-	addi	-4,s_addr,s_addr	/* adj source only by 4 */
-	
-done:    
-	bv		0(r2)
-	stbs		r0,0(d_addr)
-quit:
-EXIT(strncat)
diff --git a/newlib/libc/machine/hppa/strncmp.S b/newlib/libc/machine/hppa/strncmp.S
deleted file mode 100644
index 222384ee7..000000000
--- a/newlib/libc/machine/hppa/strncmp.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* strcmp(s1, s2) */
-/* returns integer: < 0 iff s1 lexicographically less than s2 */
-/* 		    > 0 iff s1 lexicographically greater than s2 */
-/* 		    = 0 iff s1 lexicographically equal to s2 */
-/*  		    = 0 iff s1 lexicographically equal to s2 */
-/*		    quit after n charachters */
-#include "DEFS.h"
-
-#define s1   	  26
-#define s2  	  25
-#define tmp1	  19
-#define s2word    20
-#define tmp3      21
-#define tmp7      22
-#define s1word	  29
-#define save	   1
-#define tmp6	  23
-#define tmp5	  28
-#define count	  24
-
-ENTRY(strncmp)
-	combt,<,n	r0,count,search	/* N <= 0 yields equality */
-	bv	r0(rp)			/* */
-	copy	0,ret0			/* return 0 (DELAY SLOT) */
-search:	combf,=,n 	s1,s2,findout 	/* s1 != s2? */
-	bv	r0(rp)			/* */
-        copy 	0,ret0			/* return 0 (delay slot) 	 */
-findout:
-        comibf,=,n 	0,s1,checks1	/* s1 == NULL? 	 */
-	ldbs	0(0,s2),ret0		/* */
-	bv	r0(rp)			/* */
-	subi	0,ret0,ret0		/* ret0 <- -*s2 */
-checks1:
-        comibf,=,n 	0,s2,checkitout	/* s2 == NULL? 	 */
-	bv	r0(rp)			/* */
-        ldbs 	0(0,s1),28 		/* return *s1 */
-
-checkitout:
-        extru	s2,31,2,tmp1		/* Extract the low two bits of the s2. */
-        extru	s1,31,2,tmp5		/* Extract the low two bits of the s1 */
-        sub,=	tmp5,tmp1,tmp3		/* Are s1 & s2 aligned with each other? */
-	b	not_aligned		/* It's more complicated (not_aligned) */
-	dep	0,31,2,s1		/* Compute word address of s1 (DELAY SLOT) */
-	dep	0,31,2,s2		/* Compute word address of s2 */
-	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
-	combt,=	tmp5,r0,skipmask	/* skip masking, if we can */
-	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 (DELAY SLOT) */
-	add	tmp5,count,count	/* bump count by the number of bytes */
-					/*  we are going to mask */
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word	/* mask s1word (s1) */
-	or	save,s2word,s2word	/* mask s2word (s2) */
-	
-
-skipmask:
-	combt,=,n	s1word,s2word,chknulls	/* are these words equal? */
-
-checkbyte:
-	extru	s1word,7,8,tmp3		/* get first byte (character) */
-ckbyte2:	extru	s2word,7,8,tmp7		/* get first byte (character) */
-	combf,=	tmp3,tmp7,done		/* quit if first byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
-					/* if so done ret0 already has zero */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? ret0 == 0 */
-	extru	s1word,15,8,tmp3	/* get second byte (character) */
-	extru	s2word,15,8,tmp7	/* get second byte (character)	 */
-	combf,=	tmp3,tmp7,done		/* quit if second byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
-					/* if so done ret0 already has zero */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? */
-	extru	s1word,23,8,tmp3	/* get third byte (character) */
-	extru	s2word,23,8,tmp7	/* get third byte (character)	 */
-	combf,=	tmp3,tmp7,done		/* done if third byte is not equal */
-	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
-	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
-					/* if so done ret0 already has zero */
-	addibt,<=,n	-1,count,done	/* have we checked N chars? */
-	extru	s1word,31,8,tmp3	/* get last byte (character) */
-	extru	s2word,31,8,tmp7	/* get last byte (character)	 */
-	bv	r0(rp)			/* */
-	sub	tmp3,tmp7,ret0		/*  the last characters in the word is */
-					/*   where the  difference is, so return */
-					/*    the difference and we're outta here */
-
-
-chknulls:
-	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
-	uxor,nbz	s1word,0,0	/* don't have to check s2   Just quit */
-	bv	r0(rp)			/* */
-	copy	0,28			/* return 0 */
-	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 */
-	b	skipmask		/* keep checking */
-	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
-
-
-not_aligned:
-	dep	r0,31,2,s2		/* Compute word address of s2 */
-	combt,<,n	r0,tmp3,shifts1	/* Do we shift s1 or s2 */
-	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
-	ldwm	4(0,s1),s1word		/* get first word of s1 */
-	ldwm	4(0,s2),s2word		/* get first word or s2 */
-	combt,=,n	r0,tmp5,masks2	/* Do we need to mask beginning of s1 */
-	add	tmp5,count,count	/* bump count by the number of bytes */
-					/*  we are going to mask */
-	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word	/* */
-masks2:	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s2word,s2word	/* */
-	mtctl	tmp3,11			/* Move shift amount to CR11 */
-more:	uxor,nbz	s2word,r0,r0		/* Is there a null in first word	 */
-	b,n	chunk1			/* */
-	ldwm	4(0,s2),tmp7		/* load second word to enable us to shift */
-	vshd	s2word,tmp7,s2word	/* */
-	combf,=,n	s1word,s2word,ckbyte2	/* */
-	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
-	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
-	uxor,nbz	s1word,0,0	/* even though they're equal we could be done */
-	b,n	zero	
-	copy	tmp7,s2word		/* */
-	b	more			/* keep checking */
-	ldwm	4(0,s1),s1word		/* get next s1 (DELAY SLOT) */
-
-chunk1:	
-	vshd	s2word,r0,s2word	/* */
-	b	ckbyte2			/* */
-	extru	s1word,7,8,tmp3		/* */
-
-
-shifts1:
-	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 4 */
-	sub	r0,tmp3,tmp3		/* Get negative value for left shift */
-	ldwm	4(0,s2),s2word		/* get first word of s2 */
-	ldwm	4(0,s1),s1word		/* get first word or s1 */
-	combt,=,n	r0,tmp1,masks1	/* Do we need to mask beginning of s2 */
-	add	tmp1,count,count	/* bump count by the number of bytes */
-					/*  we are going to mask */
-	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s2word,s2word	/* */
-masks1:	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
-	mtctl	save,11
-	zvdepi	-2,32,save		/* load save with proper mask */
-	or	save,s1word,s1word	/* */
-	mtctl	tmp3,11			/* Move shift amount to CR11 */
-more1:	uxor,nbz	s1word,r0,r0		/* Is there a null in first byte	 */
-	b,n	chunk2			/* */
-	ldwm	4(0,s1),tmp7		/* load second word to enable us to shift */
-	vshd	s1word,tmp7,s1word	/* */
-	combf,=,n	s2word,s1word,ckbyte2	/* */
-	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
-	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
-	uxor,nbz	s2word,0,0	/* even though they're equal we could be done */
-	b,n	zero			/* zero ret0 and quit */
-	copy	tmp7,s1word		/* */
-	b	more1			/* keep checking */
-	ldwm	4(0,s2),s2word		/* get next s2 (DELAY SLOT) */
-
-chunk2:	
-	vshd	s1word,r0,s1word	/* */
-	b	ckbyte2			/* */
-	extru	s1word,7,8,tmp3		/* */
-
-zero:	copy 	r0,ret0
-done:
-EXIT(strncmp)
diff --git a/newlib/libc/machine/hppa/strncpy.S b/newlib/libc/machine/hppa/strncpy.S
deleted file mode 100644
index 37ed83237..000000000
--- a/newlib/libc/machine/hppa/strncpy.S
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
- *
- *  To anyone who acknowledges that this file is provided "AS IS"
- *  without any express or implied warranty:
- *      permission to use, copy, modify, and distribute this file
- *  for any purpose is hereby granted without fee, provided that
- *  the above copyright notice and this notice appears in all
- *  copies, and that the name of Hewlett-Packard Company not be
- *  used in advertising or publicity pertaining to distribution
- *  of the software without specific, written prior permission.
- *  Hewlett-Packard Company makes no representations about the
- *  suitability of this software for any purpose.
- */
-
-/* HPUX_ID:	@(#) $Revision$	*/
-/*
- * strncpy(s1, s2, n)
- *
- * Copy s2 to s1, truncating or null-padding to always copy n bytes
- * return s1
- */
-
-#include "DEFS.h"
-
-#define	d_addr  r26
-#define	s_addr  r25
-#define	count   r24
-#define	tmp1    r19
-#define	tmp2    r20
-#define	tmp3    r21
-#define	tmp4    r22
-#define	tmp5	arg3
-#define	save	r1
-
-
-ENTRY(strncpy)
-
-	combt,=   s_addr,r0,pad_null_bytes1	/* if s2==NULL then pad nulls and exit */
-        copy      d_addr,ret0          /* The return value is defined to be the value of d_addr. DELAY SLOT*/
-        addibt,<,n  -4,count,byteloop     /* If count is <= 4 don't get fancy.*/
-
-        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address.*/
-        extru       d_addr,31,2,tmp5   /* Extract the low two bits of the destination address.*/
-        add         count,tmp5,count   /* pre increment the count by the byte address so that the count is*/
-        comb,<>       tmp5,tmp1,not_aligned /* branch if tmp5<>tmp1. */
-        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT.*/
-/* aligned*/
-	combt,=		tmp5,r0,skip_mask
-        ldwm        4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT)*/
-	sh3add		tmp5,r0,save	/* compute mask in save*/
-	mtctl		save,11
-	zvdepi		-2,32,save
-	b		skip_mask	/* don't reload tmp1*/
-	or		save,tmp1,tmp1  /* or mask with data*/
-
-chunks:
-	ldwm		4(0,s_addr),tmp1 /* get a word*/
-
-skip_mask:
-	uxor,nbz	tmp1,r0,save 	/* check for null*/
-	b,n		null1
-	addibf,<	-4,count,chunks
-        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
-
-/* back_porch				   last word to store*/
-         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done !*/
-         ldws        0(s_addr),tmp1     /* load up the back_porch*/
-         add         d_addr,count,d_addr/* final store address  is +1 too high !*/
-	 sh3add		count,r0, save	/* setup right mask based on count*/
-	 mtctl		save,r11
-	 zvdepi		-2,32,save	/*save now has left-hand mask*/
-	 uaddcm		r0,save,save	/*form right hand mask */
-	 or		tmp1,save,tmp1	/*and insert data*/
-	 uxor,nbz	tmp1,r0,save	/* check for null*/
-	 b,n 		null2
-	 bv		0(r2)
-	 stbys,e	tmp1,0(d_addr)	/* done */
-
-/* Begin non_aligned code. */
-not_aligned:
-        sub,>=       tmp5,tmp1,tmp3     /* compute the shift amt.and skip load if tmp5 > tmp1.*/
-        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++*/
-        zdep         tmp3,28,29,tmp4    /* compute the number of bits to shift */
-        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register.*/
-        addibt,<,n   -4,count,chkchnk2 /* first step in pre adjustment of count for looping.*/
-
-        ldwm        4(0,s_addr),tmp2    /* get either first or second word from source. */
-	combt,=		tmp5,r0,skip_mask2 /* don't mask if whole word is valid*/
-        vshd        tmp1,tmp2,tmp3      /* position data !  (delay slot)*/
-	sh3add		tmp5,r0,save	/* setup r1*/
-	mtctl		save,r11	/* setup mask in save*/
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-        mtctl           tmp4,11            /* re-load the shift count into cr11 */
-	b		skip_mask2
-	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
-
-chunk2:
-        ldwm        4(0,s_addr),tmp2
-        vshd        tmp1,tmp2,tmp3 
-
-skip_mask2:
-	uxor,nbz	tmp3, r0, save
-	b,n		null3
-        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
-
-        ldwm        4(0,s_addr),tmp1    /* get 2nd word ! */
-        vshd        tmp2,tmp1,tmp3      /* position data ! */
-	uxor,nbz	tmp3, r0, save
-	b,n		null4
-
-        addibf,<    -8,count,chunk2    /* If count is still >= 8 do another loop.*/
-        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
-
-chkchnk2:
-        addibt,<,n  4,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0)*/
-
-subchnk2: /* we have less than 8 chars to copy*/
-
-        ldwm        4(0,s_addr),tmp2    /* get next word !*/
-	combt,=		tmp5,r0,skip_mask3
-        vshd        tmp1,tmp2,tmp3      /* position data !*/
-	sh3add		tmp5,r0,save	/* setup r1*/
-	mtctl		save,r11	/* setup mask in save*/
-	zvdepi		-2,32,save
-	or		save, tmp3, tmp3
-	mtctl		tmp4,11		/* restore shift value again */
-	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
-skip_mask3:
-	uxor,nbz	tmp3,r0,save
-	b,n		null4
-	b		bp_1 /* we now have less than 4 bytes to move*/
-        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
-
-bp_0:    
-	copy        tmp1,tmp2           /* switch registers used in the shift process.*/
-	addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done */
-
-bp_1:
-        ldwm        4(0,s_addr),tmp1    /* get final word !        */
-        vshd        tmp2,tmp1,tmp3      /* position data !*/
-	uxor,sbz	tmp3,r0,save	/* if some-byte-zero */
-	b		no_null		/* don't goto no_null-find which null instead */
-	add		d_addr,count,d_addr	/* get d_addr ready for stbys,e */
-	extru,<>	save,7,8,r0
-	b		found_null5
-	copy		r0, tmp5
-	extru,<>	save,15,8,r0
-	b		found_null5
-	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
-	extru,<> 	save,23,8,r0
-	b		found_null5
-	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
-	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
-found_null5:
-	and		tmp3,tmp5,tmp3  /* zero out tmp5 based on mask in tmp5*/
-no_null:
-	bv		0(r2)		/* were done*/
-        stbys,e     tmp3,0(0,d_addr)    /* store the data !*/
-
-/* here we do ye old byte-at-a-time moves.*/
-byteloop: 
-	addibt,=,n     4,count,done
-        comb,=    0,s_addr,done
-	stbs	  r0,0(d_addr)		/* store null in case s_addr == NULL */
-        ldbs,ma     1(s_addr),tmp1
-encore:
-	combt,=,n	tmp1,r0, pad_null_bytes1
-        stbs,ma     tmp1,1(d_addr) 
-        addibf,=,n  -1,count,encore
-        ldbs,ma     1(s_addr),tmp1
-	b,n		done
-
-pnb_1:
-	addibt,=,n	4,count,done /* if count was already 0 then we're done*/
-
-pad_null_bytes1:
-	combt,=,n   	count,r0,done	/* if count==0 then exit */
-pad_null_bytes2:
-	addibf,=	-1,count,pad_null_bytes2
-	stbs,ma		r0,1(d_addr)
-	b,n		done
-
-pad_nulls:
-	addibf,<=,n	-4,count,pad_nulls
-	stwm		r0,4(d_addr)
-	b,n		pnb_1
-
-
-null1:
-	extru,<>	save,7,8,r0
-	b		found_null1
-	copy		r0, tmp5
-	extru,<>	save,15,8,r0
-	b		found_null1
-	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
-	extru,<> 	save,23,8,r0
-	b		found_null1
-	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
-	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
-found_null1:
-	and		tmp1,tmp5,tmp1		/*zero out tmp1 according to mask*/
-	b		pad_nulls		/* nullify remaining count bytes*/
-	stbys,b,m	tmp1,4(0,d_addr)	/* first word (account for alignment)*/
-
-
-null2:	/* back porch case. We have less than 4 bytes to go.*/
-	extru,<>	save,7,8,r0 	/* is null in 1st byte? */
-	b		found_null2
-	copy		r0, tmp5
-	extru,<>	save,15,8,r0	/* is null in 2nd byte? */
-	b		found_null2
-	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
-	b		found_null2	/* null must be in 3rd byte */
-	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
-found_null2:	
-	and		tmp1,tmp5,tmp1		/*zero out tmp1 according to mask*/
-	bv		0(r2)			/* we're done*/
-	stbys,e		tmp1,0(0,d_addr)	/* last word (back porch)*/
-
-null3:	/* not_aligned case where null is found in first of two words--adjust count*/
-	extru,<>	save,7,8,r0
-	b		found_null3
-	copy		r0, tmp5
-	extru,<>	save,15,8,r0
-	b		found_null3
-	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
-	extru,<> 	save,23,8,r0
-	b		found_null3
-	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
-	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
-found_null3:
-	addi		4,count,count 		/* fix count since null is in first of two words*/
-	and		tmp3,tmp5,tmp3		/*zero out tmp3 according to mask*/
-	b		pad_nulls		/* nullify remaining count bytes*/
-        stbys,b,m       tmp3,4(d_addr)
-
-null4:	/* not_aligned case where null is found in second of two words*/
-	extru,<>	save,7,8,r0
-	b		found_null4
-	copy		r0, tmp5
-	extru,<>	save,15,8,r0
-	b		found_null4
-	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
-	extru,<> 	save,23,8,r0
-	b		found_null4
-	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
-	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
-found_null4:
-	and		tmp3,tmp5,tmp3		/*zero out tmp4 according to mask*/
-	b		pad_nulls		/* nullify remaining count bytes*/
-        stbys,b,m       tmp3,4(d_addr)
-
-done:    
-EXIT(strncpy)
diff --git a/newlib/libc/machine/i386/Makefile.am b/newlib/libc/machine/i386/Makefile.am
deleted file mode 100644
index d48f3ae1c..000000000
--- a/newlib/libc/machine/i386/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-if MACH_ADD_SETJMP
-mach_add_obj=setjmp.$(oext)
-else
-mach_add_obj=
-endif
-
-LIB_SOURCES = \
-	memchr.S memcmp.S memcpy.S memset.S strchr.S \
-	memmove.S strlen.S i386mach.h
-
-libi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libi386.la
-libi386_la_SOURCES = $(LIB_SOURCES)
-EXTRA_libi386_la_SOURCES = setjmp.S
-libi386_la_LIBADD = $(mach_add_obj)
-libi386_la_DEPENDENCIES = $(mach_add_obj)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-lib_a_LIBADD = $(mach_add_obj)
-lib_a_DEPENDENCIES = $(mach_add_obj)
-EXTRA_lib_a_SOURCES = setjmp.S
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../Makefile.shared
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/i386/Makefile.in b/newlib/libc/machine/i386/Makefile.in
deleted file mode 100644
index 35489d123..000000000
--- a/newlib/libc/machine/i386/Makefile.in
+++ /dev/null
@@ -1,416 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-@MACH_ADD_SETJMP_TRUE@mach_add_obj = @MACH_ADD_SETJMP_TRUE@setjmp.$(oext)
-@MACH_ADD_SETJMP_FALSE@mach_add_obj = 
-
-LIB_SOURCES = \
-	memchr.S memcmp.S memcpy.S memset.S strchr.S \
-	memmove.S strlen.S i386mach.h
-
-
-libi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libi386.la
-@USE_LIBTOOL_TRUE@libi386_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@EXTRA_libi386_la_SOURCES = @USE_LIBTOOL_TRUE@setjmp.S
-@USE_LIBTOOL_TRUE@libi386_la_LIBADD = @USE_LIBTOOL_TRUE@$(mach_add_obj)
-@USE_LIBTOOL_TRUE@libi386_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(mach_add_obj)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(mach_add_obj)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(mach_add_obj)
-@USE_LIBTOOL_FALSE@EXTRA_lib_a_SOURCES = @USE_LIBTOOL_FALSE@setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  memchr.$(OBJEXT) memcmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@memcpy.$(OBJEXT) memset.$(OBJEXT) strchr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@memmove.$(OBJEXT) strlen.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libi386_la_OBJECTS =  memchr.lo memcmp.lo memcpy.lo \
-@USE_LIBTOOL_TRUE@memset.lo strchr.lo memmove.lo strlen.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(EXTRA_lib_a_SOURCES) $(libi386_la_SOURCES) $(EXTRA_libi386_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libi386_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libi386.la: $(libi386_la_OBJECTS) $(libi386_la_DEPENDENCIES)
-	$(LINK)  $(libi386_la_LDFLAGS) $(libi386_la_OBJECTS) $(libi386_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/i386/aclocal.m4 b/newlib/libc/machine/i386/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/machine/i386/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/machine/i386/configure b/newlib/libc/machine/i386/configure
deleted file mode 100755
index 36ac5cd65..000000000
--- a/newlib/libc/machine/i386/configure
+++ /dev/null
@@ -1,3328 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-
-
-if test "x$mach_add_setjmp" = 'xtrue'; then
-  MACH_ADD_SETJMP_TRUE=
-  MACH_ADD_SETJMP_FALSE='#'
-else
-  MACH_ADD_SETJMP_TRUE='#'
-  MACH_ADD_SETJMP_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@MACH_ADD_SETJMP_TRUE@%$MACH_ADD_SETJMP_TRUE%g
-s%@MACH_ADD_SETJMP_FALSE@%$MACH_ADD_SETJMP_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/i386/configure.in b/newlib/libc/machine/i386/configure.in
deleted file mode 100644
index b04f8b695..000000000
--- a/newlib/libc/machine/i386/configure.in
+++ /dev/null
@@ -1,24 +0,0 @@
-dnl This is the newlib/libc/machine/i386 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-dnl We have to add the following lines because automake detects the
-dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This code must occur after
-dnl NEWLIB_CONFIGURE. 
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-AM_CONDITIONAL(MACH_ADD_SETJMP, test "x$mach_add_setjmp" = 'xtrue')
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/i386/f_atan2.S b/newlib/libc/machine/i386/f_atan2.S
deleted file mode 100644
index 5bb074f80..000000000
--- a/newlib/libc/machine/i386/f_atan2.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/* 
-Fast version of atan2 using Intel float instructions.
-
-   double _f_atan2 (double y, double x);
-
-Function computes arctan ( y / x ).
-There is no error checking or setting of errno.
-*/
-	
-	#include "i386mach.h"
-
-	.global SYM (_f_atan2)
-       SOTYPE_FUNCTION(_f_atan2)
-
-SYM (_f_atan2):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	fldl 16(ebp)
-	fpatan
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_atan2f.S b/newlib/libc/machine/i386/f_atan2f.S
deleted file mode 100644
index 6df0c7539..000000000
--- a/newlib/libc/machine/i386/f_atan2f.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of atan2f using Intel float instructions.
-
-   float _f_atan2f (float y, float x);
-
-Function computes arctan ( y / x ).
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_atan2f)
-       SOTYPE_FUNCTION(_f_atan2f)
-
-SYM (_f_atan2f):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	flds 12(ebp)
-	fpatan
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_exp.c b/newlib/libc/machine/i386/f_exp.c
deleted file mode 100644
index 0ec721b7b..000000000
--- a/newlib/libc/machine/i386/f_exp.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998,2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of exp using Intel float instructions.
-
-   double _f_exp (double x);
-
-Function computes e ** x.  The following special cases exist:
-   1. if x is 0.0 ==> return 1.0
-   2. if x is infinity ==> return infinity
-   3. if x is -infinity ==> return 0.0
-   4. if x is NaN ==> return x
-There is no error checking or setting of errno.
-*/
-
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-double _f_exp (double x)
-{
-   if (check_finite(x))
-     {
-       double result;
-       asm ("fldl2e; fmulp; fld %%st; frndint; fsub %%st,%%st(1); fxch;" \
-          "fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1); fmulp" :
-          "=t"(result) : "0"(x));
-       return result;
-     }
-   else if (x == -infinity())
-     return 0.0;
-
-   return x;
-}
-
-#endif
diff --git a/newlib/libc/machine/i386/f_expf.c b/newlib/libc/machine/i386/f_expf.c
deleted file mode 100644
index b32d1f208..000000000
--- a/newlib/libc/machine/i386/f_expf.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of exp using Intel float instructions.
-
-   float _f_expf (float x);
-
-Function computes e ** x.  The following special cases exist:
-   1. if x is 0.0 ==> return 1.0
-   2. if x is infinity ==> return infinity
-   3. if x is -infinity ==> return 0.0
-   4. if x is NaN ==> return x
-There is no error checking or setting of errno.
-*/
-
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-float _f_expf (float x)
-{
-   if (check_finitef(x))
-     {
-       float result;
-       asm ("fldl2e; fmulp; fld %%st; frndint; fsub %%st,%%st(1); fxch;" \
-          "fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1); fmulp" :
-          "=t"(result) : "0"(x));
-       return result;
-     }
-   else if (x == -infinityf())
-     return 0.0;
-
-   return x;
-}
-
-#endif
diff --git a/newlib/libc/machine/i386/f_frexp.S b/newlib/libc/machine/i386/f_frexp.S
deleted file mode 100644
index febe115bc..000000000
--- a/newlib/libc/machine/i386/f_frexp.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of frexp using Intel float instructions.
-
-   double _f_frexp (double x, int *exp);
-
-Function splits x into y * 2 ** z.  It then
-returns the value of y and updates *exp with z.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_frexp)
-       SOTYPE_FUNCTION(_f_frexp)
-
-SYM (_f_frexp):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	movl 16(ebp),eax
-
-	fxtract
-	fld1
-	fchs
-	fxch
-	fscale
-	fstp st1
-	fxch
-	fld1
-	faddp
-	fistpl 0(eax)
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_frexpf.S b/newlib/libc/machine/i386/f_frexpf.S
deleted file mode 100644
index 909026d66..000000000
--- a/newlib/libc/machine/i386/f_frexpf.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of frexpf using Intel float instructions.
-
-   float _f_frexpf (float x, int *exp);
-
-Function splits x into y * 2 ** z.  It then
-returns the value of y and updates *exp with z.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_frexpf)
-       SOTYPE_FUNCTION(_f_frexpf)
-
-SYM (_f_frexpf):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	movl 12(ebp),eax
-
-	fxtract
-	fld1
-	fchs
-	fxch
-	fscale
-	fstp st1
-	fxch
-	fld1
-	faddp
-	fistpl 0(eax)
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_ldexp.S b/newlib/libc/machine/i386/f_ldexp.S
deleted file mode 100644
index e7b83c438..000000000
--- a/newlib/libc/machine/i386/f_ldexp.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of ldexp using Intel float instructions.
-
-   double _f_ldexp (double x, int exp);
-
-Function calculates x * 2 ** exp.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_ldexp)
-       SOTYPE_FUNCTION(_f_ldexp)
-
-SYM (_f_ldexp):
-	pushl ebp
-	movl esp,ebp
-	fild 16(ebp)
-	fldl 8(ebp)
-	fscale
-	fstp st1
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_ldexpf.S b/newlib/libc/machine/i386/f_ldexpf.S
deleted file mode 100644
index 59d53548c..000000000
--- a/newlib/libc/machine/i386/f_ldexpf.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of ldexpf using Intel float instructions.
-
-   float _f_ldexpf (float x, int exp);
-
-Function calculates x * 2 ** exp.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_ldexpf)
-       SOTYPE_FUNCTION(_f_ldexpf)
-
-SYM (_f_ldexpf):
-	pushl ebp
-	movl esp,ebp
-	fild 12(ebp)
-	flds 8(ebp)
-	fscale
-	fstp st1
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_log.S b/newlib/libc/machine/i386/f_log.S
deleted file mode 100644
index 70e62cbc5..000000000
--- a/newlib/libc/machine/i386/f_log.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of log using Intel float instructions.
-
-   double _f_log (double x);
-
-Function calculates the log base e of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log)
-       SOTYPE_FUNCTION(_f_log)
-
-SYM (_f_log):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2e
-	fdivrp
-	fldl 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_log10.S b/newlib/libc/machine/i386/f_log10.S
deleted file mode 100644
index 8d1b87319..000000000
--- a/newlib/libc/machine/i386/f_log10.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of log10 using Intel float instructions.
-
-   double _f_log10 (double x);
-
-Function calculates the log base 10 of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log10)
-       SOTYPE_FUNCTION(_f_log10)
-
-SYM (_f_log10):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2t
-	fdivrp
-	fldl 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_log10f.S b/newlib/libc/machine/i386/f_log10f.S
deleted file mode 100644
index 66ec5062e..000000000
--- a/newlib/libc/machine/i386/f_log10f.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of logf using Intel float instructions.
-
-   float _f_log10f (float x);
-
-Function calculates the log base 10 of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log10f)
-       SOTYPE_FUNCTION(_f_log10f)
-
-SYM (_f_log10f):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2t
-	fdivrp
-	flds 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_logf.S b/newlib/libc/machine/i386/f_logf.S
deleted file mode 100644
index 3fafa8d84..000000000
--- a/newlib/libc/machine/i386/f_logf.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of logf using Intel float instructions.
-
-   float _f_logf (float x);
-
-Function calculates the log base e of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_logf)
-       SOTYPE_FUNCTION(_f_logf)
-
-SYM (_f_logf):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2e
-	fdivrp
-	flds 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_math.h b/newlib/libc/machine/i386/f_math.h
deleted file mode 100644
index bd44b1e92..000000000
--- a/newlib/libc/machine/i386/f_math.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __F_MATH_H__
-#define __F_MATH_H__
-
-#include <_ansi.h>
-#include "fdlibm.h"
-
-__inline__
-static 
-int 
-_DEFUN (check_finite, (x),
-         double x)
-{  
-  __int32_t hx;
-  GET_HIGH_WORD(hx,x);
-  return  (int)((__uint32_t)((hx&0x7fffffff)-0x7ff00000)>>31);
-}
-
-__inline__
-static 
-int 
-_DEFUN (check_finitef, (x),
-         float x)
-{  
-  __int32_t ix;
-  GET_FLOAT_WORD(ix,x);
-  return  (int)((__uint32_t)((ix&0x7fffffff)-0x7f800000)>>31);
-}
-
-#endif /* __F_MATH_H__ */
diff --git a/newlib/libc/machine/i386/f_pow.c b/newlib/libc/machine/i386/f_pow.c
deleted file mode 100644
index 050faa371..000000000
--- a/newlib/libc/machine/i386/f_pow.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of pow using Intel float instructions.
-
-   double _f_pow (double x, double y);
-
-Function calculates x to power of y.
-The function optimizes the case where x is >0.0 and y is finite.
-In such a case, there is no error checking or setting of errno.
-All other cases defer to normal pow() function which will
-set errno as normal.
-*/
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-double _f_pow (double x, double y)
-{
-  /* following sequence handles the majority of cases for pow() */
-  if (x > 0.0 && check_finite(y))
-    {
-      double result;
-      /* calculate x ** y as 2 ** (y log2(x)).  On Intel, can only
-         raise 2 to an integer or a small fraction, thus, we have
-         to perform two steps 2**integer portion * 2**fraction. */
-      asm ("fldl 8(%%ebp); fyl2x; fld %%st; frndint; fsub %%st,%%st(1);" \
-           "fxch; fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1);"\
-           "fmulp" : "=t" (result) : "0" (y));
-      return result;
-    }
-  else /* all other strange cases, defer to normal pow() */
-    return pow (x,y);
-}
-
-#endif
diff --git a/newlib/libc/machine/i386/f_powf.c b/newlib/libc/machine/i386/f_powf.c
deleted file mode 100644
index ca3ef60c7..000000000
--- a/newlib/libc/machine/i386/f_powf.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of pow using Intel float instructions.
-
-   float _f_powf (float x, float y);
-
-Function calculates x to power of y.
-The function optimizes the case where x is >0.0 and y is finite.
-In such a case, there is no error checking or setting of errno.
-All other cases defer to normal powf() function which will
-set errno as normal.
-*/
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-float _f_powf (float x, float y)
-{
-  /* following sequence handles the majority of cases for pow() */
-  if (x > 0.0 && check_finitef(y))
-    {
-      float result;
-      /* calculate x ** y as 2 ** (y log2(x)).  On Intel, can only
-         raise 2 to an integer or a small fraction, thus, we have
-         to perform two steps 2**integer portion * 2**fraction. */
-      asm ("flds 8(%%ebp); fyl2x; fld %%st; frndint; fsub %%st,%%st(1);" \
-           "fxch; fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1);"\
-           "fmulp" : "=t" (result) : "0" (y));
-      return result;
-    }
-  else /* all other strange cases, defer to normal pow() */
-    return powf (x,y);
-}
-
-#endif
diff --git a/newlib/libc/machine/i386/f_tan.S b/newlib/libc/machine/i386/f_tan.S
deleted file mode 100644
index c7c370470..000000000
--- a/newlib/libc/machine/i386/f_tan.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *                      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.             
- * ==================================================== 
- */             
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of tan using Intel float instructions.
-
-   double _f_tan (double x);
-
-Function calculates the tangent of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_tan)
-       SOTYPE_FUNCTION(_f_tan)
-
-SYM (_f_tan):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	fptan
-	fincstp
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/f_tanf.S b/newlib/libc/machine/i386/f_tanf.S
deleted file mode 100644
index 6afda9e73..000000000
--- a/newlib/libc/machine/i386/f_tanf.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *                              
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.                
- * ====================================================
- */                     
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of tanf using Intel float instructions.
-
-   float _f_tanf (float x);
-
-Function calculates the tangent of x.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_tanf)
-       SOTYPE_FUNCTION(_f_tanf)
-
-SYM (_f_tanf):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	fptan
-	fincstp
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libc/machine/i386/i386mach.h b/newlib/libc/machine/i386/i386mach.h
deleted file mode 100644
index 23c32190d..000000000
--- a/newlib/libc/machine/i386/i386mach.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*  This file was based on the modified setjmp.S performed by
- *  Joel Sherill (joel@OARcorp.com) which specified the use
- *  of the __USER_LABEL_PREFIX__ and __REGISTER_PREFIX__ macros.
- **
- ** This file is distributed WITHOUT ANY WARRANTY; without even the implied
- ** warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* These are predefined by new versions of GNU cpp.  */
- 
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#define __REG_PREFIX__ %
- 
-/* ANSI concatenation macros.  */
- 
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a##b
- 
-/* Use the right prefix for global labels.  */
- 
-#define SYM(x) CONCAT1(__USER_LABEL_PREFIX__, x)
- 
-/* Use the right prefix for registers.  */
- 
-#define REG(x) CONCAT1(__REG_PREFIX__, x)
- 
-#define eax REG(eax)
-#define ebx REG(ebx)
-#define ecx REG(ecx)
-#define edx REG(edx)
-#define esi REG(esi)
-#define edi REG(edi)
-#define ebp REG(ebp)
-#define esp REG(esp)
-
-#define st0 REG(st)
-#define st1 REG(st(1))
-#define st2 REG(st(2))
-#define st3 REG(st(3))
-#define st4 REG(st(4))
-#define st5 REG(st(5))
-#define st6 REG(st(6))
-#define st7 REG(st(7))
-
-#define ax REG(ax)
-#define bx REG(bx)
-#define cx REG(cx)
-#define dx REG(dx)
-
-#define ah REG(ah)
-#define bh REG(bh)
-#define ch REG(ch)
-#define dh REG(dh)
-
-#define al REG(al)
-#define bl REG(bl)
-#define cl REG(cl)
-#define dl REG(dl)
-
-#define mm1 REG(mm1)
-#define mm2 REG(mm2)
-#define mm3 REG(mm3)
-#define mm4 REG(mm4)
-#define mm5 REG(mm5)
-#define mm6 REG(mm6)
-#define mm7 REG(mm7)
-
-#ifdef _I386MACH_NEED_SOTYPE_FUNCTION
-#define SOTYPE_FUNCTION(sym) .type SYM(sym),@function
-#else
-#define SOTYPE_FUNCTION(sym)
-#endif
-
-#ifdef _I386MACH_ALLOW_HW_INTERRUPTS
-#define        __CLI
-#define        __STI
-#else
-#define __CLI  cli
-#define __STI  sti
-#endif
diff --git a/newlib/libc/machine/i386/memchr.S b/newlib/libc/machine/i386/memchr.S
deleted file mode 100644
index d29a04521..000000000
--- a/newlib/libc/machine/i386/memchr.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-	
-	.global	SYM (memchr)
-       SOTYPE_FUNCTION(memchr)
-
-SYM (memchr):
-	pushl	ebp
-	movl	esp,ebp
-	pushl 	edi
-	movl 	12(ebp),eax
-	movl 	16(ebp),ecx
-	movl 	8(ebp),edi
-
-	xorl	edx,edx
-	testl	ecx,ecx
-	jz	L1
-
-	cld
-	repnz
-	scasb
-
-	setnz	dl
-	decl	edi
-	decl	edx
-	andl	edi,edx
-L1:
-	movl	edx,eax
-
-	leal	-4(ebp),esp
-	popl	edi
-	leave
-	ret
diff --git a/newlib/libc/machine/i386/memcmp.S b/newlib/libc/machine/i386/memcmp.S
deleted file mode 100644
index 26b8ef1b6..000000000
--- a/newlib/libc/machine/i386/memcmp.S
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-
-	.global SYM (memcmp)
-       SOTYPE_FUNCTION(memcmp)
-
-SYM (memcmp):
-
-	pushl ebp
-	movl esp,ebp
-	subl $16,esp
-	pushl ebx
-	pushl edi
-	pushl esi
-	movl 8(ebp),edi
-	movl 12(ebp),esi
-	movl 16(ebp),ecx
-	cld
-
-/* check if length is zero in which case just return 0 */
-
-	xorl eax,eax
-	testl ecx,ecx
-	jz L4
-
-#ifndef __OPTIMIZE_SIZE__
-
-/* if aligned on long boundary, compare doublewords at a time first */
-
-	movl edi,eax
-	orl esi,eax
-	testb $3,al
-	jne BYTECMP
-	movl ecx,ebx
-	shrl $2,ecx		/* calculate number of long words to compare */
-	repz
-	cmpsl
-	jz L5
-	subl $4,esi
-	subl $4,edi
-	movl $4,ecx
-	jmp BYTECMP
-L5:
-	andl $3,ebx		/* calculate number of remaining bytes */
-	movl ebx,ecx
-
-#endif /* not __OPTIMIZE_SIZE__ */
-
-BYTECMP: /* compare any unaligned bytes or remainder bytes */
-	repz
-	cmpsb
-
-/* set output to be < 0 if less than, 0 if equal, or > 0 if greater than */
-L3:
-	xorl edx,edx
-	movb -1(esi),dl
-	xorl eax,eax
-	movb -1(edi),al
-	subl edx,eax
-
-L4:
-	leal -28(ebp),esp
-	popl esi
-	popl edi
-	popl ebx
-	leave
-	ret
diff --git a/newlib/libc/machine/i386/memcpy.S b/newlib/libc/machine/i386/memcpy.S
deleted file mode 100644
index b53e2a17b..000000000
--- a/newlib/libc/machine/i386/memcpy.S
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-	
-	.global SYM (memcpy)
-       SOTYPE_FUNCTION(memcpy)
-
-SYM (memcpy):
-
-	pushl ebp
-	movl esp,ebp
-	pushl esi
-	pushl edi
-	pushl ebx
-	movl 8(ebp),edi
-	movl 16(ebp),ecx
-	movl 12(ebp),esi
-	cld
-		
-#ifndef __OPTIMIZE_SIZE__
-		
-	cmpl $8,ecx
-	jbe .L3
-
-/* move any preceding bytes until destination address is long word aligned */
-		
-	movl edi,edx	
-	movl ecx,ebx
-	andl $3,edx
-	jz .L11
-	movl $4,ecx
-	subl edx,ecx
-	andl $3,ecx
-	subl ecx,ebx
-	rep
-	movsb
-	
-	mov ebx,ecx
-
-/* move bytes a long word at a time */
-		
-.L11:
-	shrl $2,ecx
-	.p2align 2
-	rep
-	movsl
-	
-	movl ebx,ecx
-	andl $3,ecx
-	
-#endif /* !__OPTIMIZE_SIZE__ */
-
-/* handle any remaining bytes */
-		
-.L3:		
-	rep
-	movsb
-.L5:		
-	movl 8(ebp),eax
-
-	leal -12(ebp),esp
-	popl ebx
-	popl edi
-	popl esi
-	leave
-	ret
diff --git a/newlib/libc/machine/i386/memmove.S b/newlib/libc/machine/i386/memmove.S
deleted file mode 100644
index 1ea2f6dfc..000000000
--- a/newlib/libc/machine/i386/memmove.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-	
-	.global SYM (memmove)
-       SOTYPE_FUNCTION(memmove)
-
-SYM (memmove):
-
-	pushl ebp
-	movl esp,ebp
-	pushl esi
-	pushl edi
-	pushl ebx
-	movl 8(ebp),edi
-	movl 16(ebp),ecx
-	movl 12(ebp),esi
-
-/*  check for destructive overlap (src < dst && dst < src + length) */
-
-	cld
-	cmpl edi,esi
-	jae  .L2
-	leal -1(ecx,esi),ebx
-	cmpl ebx,edi
-	ja   .L2
-
-/* IF:	 destructive overlap, must copy backwards */
-
-	addl ecx,esi
-	addl ecx,edi
-	std
-
-#ifndef __OPTIMIZE_SIZE__
-	
-	cmpl $8,ecx
-	jbe .L13
-.L18:
-
-/* move trailing bytes in reverse until destination address is long word aligned */
-		
-	movl edi,edx
-	movl ecx,ebx
-	andl $3,edx
-	jz .L21
-	
-	movl edx,ecx
-	decl esi
-	decl edi
-	subl ecx,ebx
-	rep
-	movsb
-	
-	mov ebx,ecx
-	incl esi
-	incl edi
-
-.L21:
-	
-/* move bytes in reverse, a long word at a time */
-		
-	shrl $2,ecx
-	subl $4,esi
-	subl $4,edi
-	rep
-	movsl
-	
-	addl $4,esi
-	addl $4,edi
-	movl ebx,ecx
-	andl $3,ecx
-	
-#endif /* !__OPTIMIZE_SIZE__ */
-
-/* handle any remaining bytes not on a long word boundary */			
-	
-.L13: 
-	decl esi
-	decl edi
-
-.L15:
-	rep
-	movsb
-	jmp .L5
-	.p2align 4,,7
-
-/* ELSE:   no destructive overlap so we copy forwards */
-		
-.L2:
-
-#ifndef __OPTIMIZE_SIZE__
-		
-	cmpl $8,ecx
-	jbe .L3
-
-/* move any preceding bytes until destination address is long word aligned */
-		
-	movl edi,edx	
-	movl ecx,ebx
-	andl $3,edx
-	jz .L11
-	movl $4,ecx
-	subl edx,ecx
-	andl $3,ecx
-	subl ecx,ebx
-	rep
-	movsb
-	
-	mov ebx,ecx
-
-/* move bytes a long word at a time */
-		
-.L11:
-	shrl $2,ecx
-	.p2align 2
-	rep
-	movsl
-	
-	movl ebx,ecx
-	andl $3,ecx
-	
-#endif /* !__OPTIMIZE_SIZE__ */
-
-/* handle any remaining bytes */
-		
-.L3:		
-	rep
-	movsb
-.L5:		
-	movl 8(ebp),eax
-	cld
-
-	leal -12(ebp),esp
-	popl ebx
-	popl edi
-	popl esi
-	leave
-	ret
diff --git a/newlib/libc/machine/i386/memset.S b/newlib/libc/machine/i386/memset.S
deleted file mode 100644
index ce40820ff..000000000
--- a/newlib/libc/machine/i386/memset.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-
-	.global SYM (memset)
-       SOTYPE_FUNCTION(memset)
-
-SYM (memset):
-
-	pushl ebp
-	movl esp,ebp
-	pushl edi
-	pushl ebx
-	movl 8(ebp),edi
-	movl 12(ebp),eax
-	movl 16(ebp),ecx
-	cld
-
-#ifndef __OPTIMIZE_SIZE__
-	andl $255,eax
-	movl ecx,ebx
-	testl $3,edi
-	jne .L19
-	cmpl $16,ecx
-	jbe .L19
-
-	movl eax,edx
-	sall $8,eax
-	orl edx,eax
-
-	movl eax,edx
-	sall $16,edx
-	orl edx,eax
-
-	shrl $2,ecx
-	andl $3,ebx
-	rep
-	stosl
-	movl ebx,ecx
-#endif /* not __OPTIMIZE_SIZE__ */
-	
-.L19:
-	rep
-	stosb
-
-	movl 8(ebp),eax
-
-	leal -8(ebp),esp
-	popl ebx
-	popl edi
-	leave
-	ret
diff --git a/newlib/libc/machine/i386/setjmp.S b/newlib/libc/machine/i386/setjmp.S
deleted file mode 100644
index 7cabba4d0..000000000
--- a/newlib/libc/machine/i386/setjmp.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/* This is file is a merger of SETJMP.S and LONGJMP.S */
-/*
- *  This file was modified to use the __USER_LABEL_PREFIX__ and
- *  __REGISTER_PREFIX__ macros defined by later versions of GNU cpp by
- *  Joel Sherrill (joel@OARcorp.com)
- *  Slight change: now includes i386mach.h for this (Werner Almesberger)
- *
- * Copyright (C) 1991 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
- /*
- **	jmp_buf:
- **	 eax ebx ecx edx esi edi ebp esp eip
- **	 0   4   8   12  16  20  24  28  32
- */
-
-       #include "i386mach.h"
-
-        .global SYM (setjmp)
-        .global SYM (longjmp)
-       SOTYPE_FUNCTION(setjmp)
-       SOTYPE_FUNCTION(longjmp)
- 
-SYM (setjmp):
-
-	pushl	ebp
-	movl	esp,ebp
-
-	pushl	edi
-	movl	8 (ebp),edi
-
-	movl	eax,0 (edi)
-	movl	ebx,4 (edi)
-	movl	ecx,8 (edi)
-	movl	edx,12 (edi)
-	movl	esi,16 (edi)
-
-	movl	-4 (ebp),eax
-	movl	eax,20 (edi)
-
-	movl	0 (ebp),eax
-	movl	eax,24 (edi)
-
-	movl	esp,eax
-	addl	$12,eax
-	movl	eax,28 (edi)
-	
-	movl	4 (ebp),eax
-	movl	eax,32 (edi)
-
-	popl	edi
-	movl	$0,eax
-	leave
-	ret
-
-SYM (longjmp):
-	pushl	ebp
-	movl	esp,ebp
-
-	movl	8(ebp),edi	/* get jmp_buf */
-	movl	12(ebp),eax	/* store retval in j->eax */
-	movl	eax,0(edi)
-
-	movl	24(edi),ebp
-
-       __CLI
-	movl	28(edi),esp
-	
-	pushl	32(edi)	
-
-	movl	0(edi),eax
-	movl	4(edi),ebx
-	movl	8(edi),ecx
-	movl	12(edi),edx
-	movl	16(edi),esi
-	movl	20(edi),edi
-       __STI
-
-	ret
diff --git a/newlib/libc/machine/i386/strchr.S b/newlib/libc/machine/i386/strchr.S
deleted file mode 100644
index fe425d2d8..000000000
--- a/newlib/libc/machine/i386/strchr.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-	
-	.global SYM (strchr)
-       SOTYPE_FUNCTION(strchr)
-
-SYM (strchr):
-
-	pushl ebp
-	movl esp,ebp
-	pushl edi
-	pushl ebx
-	xorl ebx,ebx
-	movl 8(ebp),edi
-	movb 12(ebp),bl
-
-#ifndef __OPTIMIZE_SIZE__	
-/* check if string is aligned, if not do check one byte at a time */
-	test $3,edi
-	jne L9
-
-/* create 4 byte mask which is just the desired byte repeated 4 times */
-	movl ebx,ecx
-	sall $8,ebx
-	subl $4,edi
-	orl ecx,ebx
-	movl ebx,edx
-	sall $16,ebx
-	orl edx,ebx
-
-/* loop performing 4 byte mask checking for 0 byte or desired byte */
-	.p2align 4,,7
-L10:
-	addl $4,edi
-	movl (edi),ecx
-	leal -16843009(ecx),edx
-	movl ecx,eax
-	notl eax
-	andl eax,edx
-	testl $-2139062144,edx
-	jne L9
-
-	movl ebx,eax
-	xorl ecx,eax
-	leal -16843009(eax),edx
-	notl eax
-	andl eax,edx
-	testl $-2139062144,edx
-	je L10
-#endif /* not __OPTIMIZE_SIZE__ */
-		
-/* loop while (*s && *s++ != c) */
-L9:
-	leal -1(edi),eax
-	.p2align 4,,7
-L15:
-	incl eax
-	movb (eax),dl
-	testb dl,dl
-	je L14
-	cmpb bl,dl
-	jne L15
-	
-L14:
-/*  if (*s == c) return address otherwise return NULL */
-	cmpb bl,(eax)
-	je L19
-	xorl eax,eax
-
-L19:
-	leal -8(ebp),esp
-	popl ebx
-	popl edi
-	leave
-	ret
-
diff --git a/newlib/libc/machine/i386/strlen.S b/newlib/libc/machine/i386/strlen.S
deleted file mode 100644
index 459b3a959..000000000
--- a/newlib/libc/machine/i386/strlen.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-	#include "i386mach.h"
-
-	.global SYM (strlen)
-       SOTYPE_FUNCTION(strlen)
-
-SYM (strlen):
-
-	pushl ebp
-	movl esp,ebp
-	pushl edi
-	movl 8(ebp),edx
-
-	cld
-	movl edx,edi
-	movl $4294967295,ecx
-	xor eax,eax
-	repnz
-	scasb
-	subl edx,edi
-	leal -1(edi),eax
-
-	leal -4(ebp),esp
-	popl edi
-	leave
-	ret
diff --git a/newlib/libc/machine/i960/Makefile.am b/newlib/libc/machine/i960/Makefile.am
deleted file mode 100644
index ec5ca63e2..000000000
--- a/newlib/libc/machine/i960/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES =
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/i960/Makefile.in b/newlib/libc/machine/i960/Makefile.in
deleted file mode 100644
index 4659a3fe9..000000000
--- a/newlib/libc/machine/i960/Makefile.in
+++ /dev/null
@@ -1,296 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = 
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-tags: TAGS
-TAGS:
-
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/i960/aclocal.m4 b/newlib/libc/machine/i960/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/i960/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/i960/configure b/newlib/libc/machine/i960/configure
deleted file mode 100755
index 091fadf52..000000000
--- a/newlib/libc/machine/i960/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=memccpy_ca.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/i960/configure.in b/newlib/libc/machine/i960/configure.in
deleted file mode 100644
index 365fe2038..000000000
--- a/newlib/libc/machine/i960/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/i960 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(memccpy_ca.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/i960/memccpy.S b/newlib/libc/machine/i960/memccpy.S
deleted file mode 100644
index df1947228..000000000
--- a/newlib/libc/machine/i960/memccpy.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memccpy.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure memccpy  (optimized assembler version for the 80960K series)
-
-	dest_addr = memccpy (dest_addr, src_addr, char, len)
-
-	copy len bytes pointed to by src_addr to the space pointed to by 
-        dest_addr, stopping if char is copied.  If char is copied,
-        return address of byte after char in dest string;  else null.
-
-
-	Undefined behavior will occur if the end of the source array is in 
-	the last two words of the program's allocated memory space.  This 
-	is so because the routine fetches ahead.  Disallowing the fetch 
-	ahead would impose a severe performance penalty.
-
-        Undefined behavior will also occur if the source and destination
-        strings overlap.
-
-	Strategy:
-
-	Fetch the source array by words and store them by words to the
-	destination array, until there are fewer than three bytes left
-	to copy.  Then, using the last word of the source (the one that
-	contains the remaining 0, 1, 2, or 3 bytes to be copied), store
-	a byte at a time until Ldone.
-
-	Tactics:
-
-	1) Do NOT try to fetch and store the words in a word aligned manner 
-	because, in my judgement, the performance degradation experienced due 
-	to non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  This is supported by the intuition that most source and
-	destination arrays (even more true of most big source arrays) will 
-	be word aligned to begin with.
-
-	2) Rather than decrementing len to zero,
-	I calculate the address of the byte after the last byte of the 
-	destination array, and quit when the destination byte pointer passes 
-	that.  
-
-*/
-
-	.globl _memccpy
-	.leafproc _memccpy, __memccpy
-	.align    2
-_memccpy:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__memccpy:
-	mov	g14, g13	# preserve return address
-	cmpibge	0,g3,Lexit_char_not_found
-
-	addo	g3,g1,g3	# compute beyond end of src
-	ld	(g1), g7	# fetch first word of source
-	lda	0xff,g5		# mask for char
-	and	g5,g2,g2	# extract only char
-	shlo	8,g2,g6
-	or	g2,g6,g6
-	shlo	16,g6,g4
-	or	g6,g4,g6	# word of char
-	b	Lwloop_b
-
-Lwloop_a:
-	ld	(g1), g7	# fetch ahead next word of source
-	st	g4, (g0)	# store word to dest
-	addo	4, g0, g0	# post-increment dest pointer
-Lwloop_b:			# word copying loop
-	addo	4, g1, g1	# pre-increment src pointer
-	cmpo	g3, g1		# is len <= 3 ?
-	mov	g7, g4		# keep a copy of the current word
-	bl	Lcloop_setup	# quit word loop if less than 4 bytes
-	scanbyte g6, g7		# check for char
-	bno	Lwloop_a		# continue word loop if char not found.
-
-Lcloop_setup:
-	subo	4, g1, g1	# back down src pointer
-	cmpobe	g1, g3, Lexit_char_not_found
-
-Lcloop_a:			# character copying loop (len < 3)
-	and	g5,g4,g7	# check the byte against char
-	cmpo	g7,g2
-	stob	g7,(g0)		# store the byte
-	addo	1, g0, g0
-	be	Lexit_char_found
-	addo	1,g1,g1
-	cmpo	g1,g3
-	shro	8,g4,g4		# position next byte
-	bne	Lcloop_a
-
-Lexit_char_not_found:
-	mov	0, g0
-Lexit_char_found:
-	lda	0,g14
-	bx	(g13)		# g0 = dest array address; g14 = 0
-Lrett:	
-	ret
-
-
-/* end of memccpy */
diff --git a/newlib/libc/machine/i960/memccpy_ca.S b/newlib/libc/machine/i960/memccpy_ca.S
deleted file mode 100644
index 60c197b72..000000000
--- a/newlib/libc/machine/i960/memccpy_ca.S
+++ /dev/null
@@ -1,245 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "mccpy_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memccpy  (optimized assembler version for the 80960CA)
-
-	dest_addr = memccpy (dest_addr, src_addr, char, len)
-
-	copy len bytes pointed to by src_addr to the space pointed to by 
-        dest_addr, stopping if char is copied.  If char is copied,
-        return address of byte after char in dest string;  else null.
-
-	Undefined behavior will occur if the end of the source array is in 
-	the last two words of the program's allocated memory space.  This 
-	is so because the routine fetches ahead.  Disallowing the fetch 
-	ahead would impose a severe performance penalty.
-
-        Undefined behavior will also occur if the source and destination
-        strings overlap.
-
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source is word aligned, destination is not
-	4) destination is word aligned, source is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g6
-#define LSW g7
-#else
-#define LSW g6
-#define MSW g7
-#endif
-
-	.globl	_memccpy
-	.leafproc	_memccpy, __memccpy
-	.align	2
-_memccpy:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memccpy:
-	notand	g1,3,g5		# extract word addr of start of src
-	 lda	(g14),g13	# preserve return address
-	cmpibge.f 0,g3,Lexit_char_not_found # Lexit if # of bytes to move is <= 0
-	cmpo	g5,g1		# check alignment of src
-	 ld	(g5),LSW	# fetch word containing at least first byte
-	notand	g0,3,g4		# extract word addr of start of dest
-	 lda	4(g5),g5	# advance src word addr
-	shlo	24,g2,g2	# reduce char to single byte
-	 bne.f	Lcase_245	# branch if src is NOT word aligned
-
-Lcase_13:
-	cmpobe.t g0,g4,Lcase_1_setup	# branch if dest word aligned
-
-Lcase_3:				# src is word aligned; dest is not
-	mov	LSW,MSW		# make copy of first word of src
-	addo	4,g4,g1		# move dest word ptr to first word boundary
-	 lda	32,g14		# initialize shift count to zero
-
-Lcase_25:
-Lcase_3_cloop_at_start:		# character copying loop for start of dest str
-	cmpdeci	0,g3,g3		# is max_bytes exhausted?
-#if __i960_BIG_ENDIAN__
-	 lda	-8(g14),g14	# augment the shift counter
-#else
-	 lda	8(g14),g14	# augment the shift counter
-#endif
-	be.f	Lexit_char_not_found	# Lexit if max_bytes is exhausted
-#if __i960_BIG_ENDIAN__
-	rotate	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	shlo	24,MSW,g4
-	 stob	MSW,(g0)	# store the byte in dest
-	cmpo	g4,g2
-	 lda	1(g0),g0	# post-increment dest ptr
-#if ! __i960_BIG_ENDIAN__
-	shro	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	 be.f	Lexit_char_found	# Lexit if char found
-	cmpobne.t g1,g0,Lcase_3_cloop_at_start # branch if reached word boundary
-
-	ld	(g5),MSW	# fetch msw of operand for double shift
-
-Lcase_4:
-	shro	8,g2,g4
-	or	g4,g2,g1
-	shro	16,g1,g4
-	or	g4,g1,g4
-
-#if __i960_BIG_ENDIAN__
-	cmpobne 0,g14,Lcase_3_wloop
-
-Lcase_3_wloop2:
-	cmpi	g3,4		# less than four bytes to move?
-	 lda	4(g5),g5	# post-increment src word addr
-	mov	LSW,g1		# extract 4 bytes of src
-	 bl.f	Lcase_13_cloop_setup	# branch if < four bytes left to move
-	scanbyte g4,g1		# branch if word has char in it
-	 bo.f	Lcase_13_cloop_setup
-	mov	MSW,LSW		# move msw to lsw
-	 ld	(g5),MSW	# pre-fetch msw of operand for double shift
-	subi	4,g3,g3		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g0)		# store 4 bytes to dest
-	addo	4,g0,g0		# post-increment dest ptr
-	 b	Lcase_3_wloop2
-#endif
-	
-Lcase_3_wloop:
-	cmpi	g3,4		# less than four bytes to move?
-	 lda	4(g5),g5	# post-increment src word addr
-	eshro	g14,g6,g1	# extract 4 bytes of src
-	 bl.f	Lcase_13_cloop_setup	# branch if < four bytes left to move
-	scanbyte g4,g1		# branch if word has char in it
-	 bo.f	Lcase_13_cloop_setup
-	mov	MSW,LSW		# move msw to lsw
-	 ld	(g5),MSW	# pre-fetch msw of operand for double shift
-	subi	4,g3,g3		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g0)		# store 4 bytes to dest
-	addo	4,g0,g0		# post-increment dest ptr
-	 b	Lcase_3_wloop
-
-Lcase_1_setup:
-	subo	4,g0,g0		# store is pre-incrementing;  back up dest addr
-	shro	8,g2,g4
-	or	g4,g2,MSW
-	shro	16,MSW,g4
-	or	g4,MSW,g4
-	 b	Lcase_1
-Lcase_1_wloop:			# word copying loop
-	subi	4,g3,g3		# decrease max_byte count by the 4 bytes moved
-	 ld	(g5),LSW	# pre-fetch next word of src
-	addo	4,g5,g5		# post-increment src addr
-	 st	g1,(g0)		# store word in dest string
-Lcase_1:				# src and dest are word aligned
-	cmpi	g3,4		# check for fewer than four bytes to move
-	addo	4,g0,g0		# pre-increment dest addr
-	 lda	(LSW),g1	# keep a copy of the src word
-	 bl.f	Lcase_13_cloop_setup	# branch if less than four bytes to copy
-	scanbyte LSW,g4		# branch if char is not in foursome
-	bno.t	Lcase_1_wloop
-Lcase_13_cloop_setup:
-	cmpibe.f 0,g3,Lexit_char_not_found	# Lexit if max_bytes is exhausted
-
-Lcase_1_cloop:
-#if __i960_BIG_ENDIAN__
-	rotate	8,g1,g1		# move next byte into position for extraction
-#endif
-	shlo	24,g1,g4
-	 stob	g1,(g0)		# store the byte in dest
-	cmpo	g4,g2
-	 lda	1(g0),g0	# post-increment dest byte addr
-	subi	1,g3,g3
-	 be.f	Lexit_char_found	# Lexit if char reached
-	cmpi	0,g3
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# move next byte into position for extraction
-#endif
-	 bne.t	Lcase_1_cloop	# continue if len not exhausted
-
-Lexit_char_not_found:
-	mov	0,g0
-Lexit_char_found:
-	lda	0,g14
-	bx	(g13)		# g0 = dest array address;  g14 = 0
-Lrett:
-	ret
-
-
-Lcase_245:
-	cmpo	g0,g4		# check alignment of dest
-	 ld	(g5),MSW	# pre-fetch second half
-	and	3,g1,g1		# compute shift count
-	shlo	3,g1,g14	
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian
-#endif
-	 be.t	Lcase_4		# branch if dest is word aligned
-	or	g4,g1,g1	# is src earlier in word, later, or sync w/ dst
-	cmpo    g0,g1		# < indicates first word of dest has more bytes
-				/* than first word of source. */
-	eshro	g14,g6,g4	# extract four bytes
-	 lda	4(g0),g1	# move dest word addr to first word boundary
-#if __i960_BIG_ENDIAN__
-	 bge.f	1f
-#else
-	 bg.f	1f
-#endif
-	mov	MSW,LSW
-	 lda	4(g5),g5	# move src word addr to second word boundary
-1:
-	notand	g1,3,g1
-	 mov	g4,MSW
-	 b	Lcase_25
-
-/* end of memccpy */
diff --git a/newlib/libc/machine/i960/memchr.S b/newlib/libc/machine/i960/memchr.S
deleted file mode 100644
index e9a4e426d..000000000
--- a/newlib/libc/machine/i960/memchr.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memchr.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memchr  (optimized assembler version for the 80960K series)
-
-	src_addr = memchr (src_addr, char, max_bytes)
-
-	searching from src_addr for a span of max_bytes bytes, return a 
-	pointer to the first byte in the source array that contains the 
-	indicated char.  Return null if the char is not found.
-
-	Undefined behavior will occur if the last byte of the source array 
-	is in the last two words of the program's allocated memory space.
-	This is so because memchr fetches ahead.  Disallowing the fetch 
-	ahead would impose a severe performance penalty.
-
-	Strategy:
-
-	Fetch the source array by words and scanbyte the words for the 
-	char until either a word with the byte is found or max_bytes is
-	exhausted.  In the former case, move through the word to find the
-	matching byte and return its memory address.  In the latter case, 
-	return zero (null).
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble that would be necessary to assure alignment.  This 
-	is supported by the intuition that most source arrays (even more 
-	true of most big source arrays) will be word aligned to begin with.
-
-	2) Rather than decrementing max_bytes to zero, I calculate the
-	address of the byte after the last byte of the source array, and
-	quit when the source byte pointer passes that.  Refining, actually
-	I calculate the address of the fifth byte after the last byte of
-	the source array, because the source byte pointer is ahead of the
-	actual examination point due to fetch ahead.
-*/
-
-	.globl	_memchr
-	.globl	__memchr
-	.leafproc	_memchr, __memchr
-	.align	2
-_memchr:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memchr:
-
-	mov	g14,g13		# preserve return address
-	lda	0xff,g7		# byte extraction mask
-	and	g1,g7,g1	# make char an 8-bit ordinal
-	mov	0,g14		# conform to register linkage standard
-	cmpibge 0,g2,Lnot_found	# do nothing if max_bytes <= 0
-	addo	4,g0,g6		# post-increment src word pointer
-	addo	g2,g6,g2	# compute ending address from start and len
-	ld	(g0),g4		# fetch first word 
-	shlo	8,g1,g3		# broadcast the char to four bytes
-	or	g1,g3,g3
-	shlo	16,g3,g5
-	or	g3,g5,g3
-
-Lsearch_for_word_with_char:
-	mov	g4,g5		# keep a copy of word
-	scanbyte g3,g5		# check for byte with char
-	ld	(g6),g4		# fetch next word of src
-	bo	Lsearch_for_char	# branch if null found 
-	addo	4,g6,g6		# post-increment src word pointer
-	cmpobge g2,g6,Lsearch_for_word_with_char	# branch if max_bytes > 3
-
-Lnot_found:
-	mov	0,g0		# char not found.  Return null
-	bx	(g13)		# g0 = addr of char in src (or null);  g14 = 0
-Lrett:
-	ret
-
-Lsearch_for_char:
-	cmpobe.f g6,g2,Lnot_found	# quit if max_bytes exhausted
-	and	g5,g7,g0	# extract byte
-	cmpo	g1,g0		# is it char?
-	addo	1,g6,g6		# bump src byte ptr
-	shro	8,g5,g5		# shift word to position next byte
-	bne.t	Lsearch_for_char
-	subo	5,g6,g0		# back up the byte pointer
-	bx	(g13)
-
-/* end of memchr */
diff --git a/newlib/libc/machine/i960/memchr_ca.S b/newlib/libc/machine/i960/memchr_ca.S
deleted file mode 100644
index ac80be71c..000000000
--- a/newlib/libc/machine/i960/memchr_ca.S
+++ /dev/null
@@ -1,153 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memchr_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memchr  (optimized assembler version for the CA)     
-
-	src_addr = memchr (src_addr, char, max_bytes)
-
-	searching from src_addr for max_bytes bytes, return a pointer to the 
-	first byte that contains the indicated byte in the source string.  
-	Return null if the byte is not found.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last two words of the program's
-	allocated memory space.  This is so because, in several cases, memchr
-	will fetch ahead.  Disallowing the fetch ahead would impose a severe 
-	performance penalty.
-
-	This program handles two cases:
-
-	1) the argument starts on a word boundary
-	2) the argument doesn't start on a word boundary
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  src ptr;  upon return it is a pointer to the matching byte, or null
-	g1  char to seek
-	g2  maximum number of bytes to check
-	g3  char to seek, broadcast to all four bytes 
-	g4  word of the source string
-	g5  copy of the word
-	g6  mask to avoid unimportant bytes in first word
-	g7  byte extraction mask
-	g13 return address
-	g14 
-*/
-
-	.globl	_memchr
-	.globl	__memchr
-	.leafproc	_memchr, __memchr
-	.align	2
-_memchr:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memchr:
-
-	mov	g14,g13		# preserve return address
-	 lda	0xff,g7		# byte extraction mask
-	and	g1,g7,g1	# make char an 8-bit ordinal
-	 lda	0,g14		# conform to register linkage standard
-	cmpibge.f 0,g2,Lnot_found	# do nothing if max_bytes <= 0
-	addo	g0,g2,g2	# compute ending address from start and len
-	and	g0,3,g6		# extract byte offset of src
-	notand	g0,3,g0		# extract word addr of start of src
-	shlo	8,g1,g3		# broadcast the char to four bytes
-	 ld	(g0),g4		# fetch word containing at least first byte
-	or	g1,g3,g3
-	shlo	16,g3,g5
-	cmpo	g1,g7		# is char being sought 0xff?
-	or	g5,g3,g3
-	shlo	3,g6,g6		# get shift count for making mask for first word
-	subi	1,0,g5		# mask initially all ones
-#if __i960_BIG_ENDIAN__
-	shro	g6,g5,g5	# get mask for bytes needed from first word
-#else
-	shlo	g6,g5,g5	# get mask for bytes needed from first word
-#endif
-	notor	g4,g5,g4	# set unneeded bytes to all ones
-	 be.f	Lsearch_for_0xff	# branch if seeking 0xff
-
-Lsearch_for_word_with_char:
-	scanbyte g3,g4		# check for byte with char
-	 lda	4(g0),g0	# pre-increment src word pointer
-	mov	g4,g5		# keep a copy of word
-	ld	(g0),g4		# fetch next word of src
-	 bo.f	Lsearch_for_char	# branch if null found 
-	cmpoble.t g0,g2,Lsearch_for_word_with_char	# branch if not null
-
-Lnot_found:
-	mov	0,g0		# char not found.  Return null
-Lexit_code:
-	bx	(g13)		# g0 = addr of char in src (or null);  g14 = 0
-Lrett:
-	ret
-
-Lsearch_for_char:
-	subo	4,g0,g0		# back up the byte pointer
-Lsearch_for_char.a:
-	cmpobe.f g0,g2,Lnot_found	# quit if max_bytes exhausted
-#if __i960_BIG_ENDIAN__
-	rotate	8,g5,g5		# shift word to position next byte
-#endif
-	and	g5,g7,g6	# extract byte
-	cmpo	g1,g6		# is it char?
-	 lda	1(g0),g0	# bump src byte ptr
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g5,g5		# shift word to position next byte
-#endif
-	 bne.t	Lsearch_for_char.a
-	subo	1,g0,g0		# back up the byte pointer
-	 b	Lexit_code
-
-Lsearch_for_0xff:
-	lda	0xf0f0f0f0,g6	# make first comparison mask for char=-1 case.
-	or	g6,g5,g6
-	and	g4,g6,g4	# make unimportant bytes of first word 0x0f
-	 b	Lsearch_for_word_with_char
-
-/* end of memchr */
diff --git a/newlib/libc/machine/i960/memcmp.S b/newlib/libc/machine/i960/memcmp.S
deleted file mode 100644
index 709eb2bdb..000000000
--- a/newlib/libc/machine/i960/memcmp.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memcmp.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure memcmp  (optimized assembler version for the 80960K series)
-
-	result = memcmp (src1_addr, src2_addr, max_bytes)
-
-	compare the byte array pointed to by src1_addr to the byte array
-	pointed to by src2_addr.  Return 0 iff the arrays are equal, -1 iff 
-	src1_addr is lexicographically less than src2_addr, and 1 iff it is 
-	lexicographically greater.  Do not compare more than max_bytes bytes.
-
-	Undefined behavior will occur if the end of either source array
-	is in the last two words of the program's allocated memory space. 
-	This is so because memcmp fetches ahead.  Disallowing the fetch ahead 
-	would impose a severe performance penalty.
-
-	Strategy:
-
-	Fetch the source strings by words and compare the words until either 
-	a differing word is found or max_bytes is exhausted.  In the former 
-	case, move through the words to find the differing byte and return 
-	plus or minus one, appropriately.  In the latter case, return zero 
-	(equality).
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble that would be necessary to assure alignment.  This 
-	is supported by the intuition that most source arrays (even more 
-	true of most big source arrays) will be word aligned to begin with.
-
-	2) Rather than decrementing max_bytes to zero, I calculate the
-	address of the byte after the last byte of the source_1 array, and
-	quit when the source byte pointer passes that.  
-*/
-
-	.globl _memcmp
-	.globl __memcmp
-	.leafproc _memcmp,__memcmp
-	.align 2
-
-_memcmp:
-#ifndef __PIC
-	lda	.Lrett,g14
-#else
-	lda	.Lrett-(.+8)(ip),g14
-#endif
-__memcmp:
-	mov	g14,g13		# preserve return address
-	ldconst 0,g14		# conform to register conventions
-	cmpibge	0,g2,Lequal_exit	# quit if max_bytes <= 0
-	addo	g0,g2,g2	# calculate byte addr of byte after last in src1
-
-.Lwloop:
-	cmpo	 g0,g2		
-	ld	(g0), g5	# fetch word of source_1
-	bge 	 Lequal_exit	# quit (equal) if max_bytes exhausted
-	ld	(g1), g3	# fetch word of source_2
-	addo     4,g0,g0	# post-increment source_1 byte ptr
-	addo     4,g1,g1       	# post-increment source_2 byte ptr
-	cmpobe	 g5,g3,.Lwloop	# branch if source words are equal
-
-	ldconst 0xff,g4		# byte extraction mask
-	subo     4,g0,g0	# back up src1 pointer
-
-.Lcloop: and	g4,g5,g7  	# extract and compare individual bytes
-	and	g4,g3,g6
-	cmpobne	g7,g6,.diff	# branch if they are different
-	shlo	8,g4,g4		# position mask for next extraction
-	addo	1,g0,g0
-	cmpobl	g0,g2,.Lcloop	# quit if max_bytes is exhausted
-
-Lequal_exit:
-	mov	0,g0
-	bx	(g13)
-.Lrett:	
-	ret
-
-.diff:	bl	.neg		# arrays differ at current byte.  
-				/* return 1 or -1 appropriately */
-        mov     1,g0
-	bx	(g13)
-.neg:	subi    1,0,g0
-.Lexit: 	
-	bx	(g13)
-
-/* end or memcmp */
diff --git a/newlib/libc/machine/i960/memcmp_ca.S b/newlib/libc/machine/i960/memcmp_ca.S
deleted file mode 100644
index 317ea89bf..000000000
--- a/newlib/libc/machine/i960/memcmp_ca.S
+++ /dev/null
@@ -1,205 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memcm_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1992,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memcmp  (optimized assembler version for the CA)     
-
-	result = memcmp (src1_addr, src2_addr, max_bytes)
-
-	compare the byte array pointed to by src1_addr to the byte array
-	pointed to by src2_addr.  Return 0 iff the arrays are equal, -1 if 
-	src1_addr is lexicly less than src2_addr, and 1 if it is lexicly 
-	greater.  Do not compare more than max_bytes bytes.
-
-	Undefined behavior will occur if the end of either source array
-	is in the last word of the program's allocated memory space.  This 
-	is so because, in several cases, memcmp will fetch ahead one word.
-	Disallowing the fetch ahead would impose a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source1 is word aligned, source2 is not
-	4) source2 is word aligned, source1 is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g14 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers are sufficient to implement the routine.
-	The registers are used as follows:
-
-	g0  original src1 ptr;  extracted word;  return result
-	g1  src2 ptr; byt extraction mask
-	g2  maximum number of bytes to compare
-	g3  src2 word ptr 
-	Little endian
-		g4  lsw of src1
-		g5  msw of src1
-		g6  src2 word
-		g7  src1 word ptr
-	Big endian
-		g4  msw of src1
-		g5  lsw of src1
-		g6  src1 word ptr
-		g7  src2 word
-	g13 return address
-	g14 shift count
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g4
-#define LSW g5
-#define SRC1 g6
-#define SRC2 g7
-#else
-#define LSW g4
-#define MSW g5
-#define SRC2 g6
-#define SRC1 g7
-#endif
-
-	.globl	_memcmp
-	.globl	__memcmp
-	.leafproc	_memcmp, __memcmp
-	.align	2
-_memcmp:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memcmp:
-Lrestart:
-#if __i960_BIG_ENDIAN__
-	subo	1,g0,SRC1
-	notand	SRC1,3,SRC1	# extract word addr of start of src1
-#else
-	notand	g0,3,SRC1	# extract word addr of start of src1
-#endif
-	 lda	(g14),g13	# preserve return address
-	cmpibge.f 0,g2,Lequal_exit	# return equality if number bytes 0
-	notand	g1,3,g3		# extract word addr of start of src2
-	 ld	(SRC1),LSW	# fetch word with at least first byte of src1
-	cmpo	g3,g1		# check alignment of src2
-	 ld	4(SRC1),MSW	# fetch second word of src1
-	shlo	3,g0,g14	# compute shift count for src1
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian.
-#endif
-	 ld	(g3),SRC2	# fetch word with at least first byte of src2
-	eshro	g14,g4,LSW	# extract word of src1
-	 lda	8(SRC1),SRC1	# advance src1 word addr
-	 bne.f	Lsrc2_unaligned	# branch if src2 is NOT word aligned
-
-	mov	LSW,g0		# at least src2 is word aligned
-
-	 lda	0xff,g1
-
-Lwloop:				# word comparing loop
-	cmpo	SRC2,g0		# compare src1 and src2 words
-	 lda	4(g3),g3	# pre-increment src2 addr
-	mov	MSW,LSW		# move msw of src1 to lsw
-	 ld	(SRC1),MSW	# pre-fetch next msw of src1
-	subi	4,g2,g2		# decrement maximum byte count
-	 bne.f	Lcloop		# branch if src1 and src2 unequal
-	cmpi	0,g2
-	 ld	(g3),SRC2	# pre-fetch next word of src2
-	eshro	g14,g4,g0	# extract word of src1
-	 lda	4(SRC1),SRC1	# post-increment src1 addr
-	bl.t	Lwloop		# branch if max_bytes not reached yet
-
-	b	Lequal_exit	# strings were equal up through max_bytes
-
-Lcloop_setup:			# setup for coming from Lsrc2_unaligned
-	mov	LSW,g0		# restore extracted src1 word
-	subo	4,g2,g2		# make up for later re-incrementing
-	 lda	0xff,g1		# byte extraction mask
-
-Lcloop:				# character comparing loop
-#if __i960_BIG_ENDIAN__
-	rotate	24,g1,g1	# shift mask for next byte
-#endif
-	and	SRC2,g1,g3	# extract next char of src2
-	and	g0,g1,LSW	# extract next char of src1
-	cmpobne.f LSW,g3,.diff	# check for equality
-#if ! __i960_BIG_ENDIAN__
-	shlo	8,g1,g1		# shift mask for next byte
-#endif
-	subi	1,g2,g2		# decrement character counter
-	 b	Lcloop		# branch if null not reached
-
-
-Lequal_exit: 			# words are equal up thru null byte
-	mov	0,g14		# conform to register conventions
-	 lda	0,g0		# return zero, indicating equality
-	bx	(g13)		# return
-Lrett:
-	ret
-
-.diff:
-	addo	4,g2,g2		# to make up for extra decrement in loop
-	 lda	0,g14
-	 bl	Lless_than_exit
-Lgreater_than_exit:
-	cmpibge.f 0,g2,Lequal_exit  # branch if difference is beyond max_bytes
-	mov	1,g0
-	 bx	(g13)		# g0 = 1 (src1 > src2)
-Lless_than_exit:
-	cmpibge.f 0,g2,Lequal_exit  # branch if difference is beyond max_bytes
-	subi	1,0,g0
-	 bx	(g13)		# g0 = -1 (src1 < src2)
-
-Lsrc2_unaligned:
-	notor	g1,3,g14	# first step in computing new src1 ptr
-	 ld	4(g3),SRC1	# fetch second word of src2
-	shlo	3,g1,MSW	# compute shift count for src2
-#if __i960_BIG_ENDIAN__
-	subo	MSW,0,MSW
-#endif
-	eshro	MSW,g6,SRC2	# extract word of src2
-	cmpo	LSW,SRC2	# compare src1 and src2 words
-	 lda	4(g3),g1	# set new src2 ptr
-	 bne.f	Lcloop_setup	# first four bytes differ
-	subo	g14,g0,g0	# second (final) step in computing new src1 ptr
-	addi	g14,g2,g2	# compute new max_bytes too
-	 lda	(g13),g14	# prepare return pointer for Lrestart
-	 b	Lrestart		# continue with both string fetches shifted
diff --git a/newlib/libc/machine/i960/memcpy.S b/newlib/libc/machine/i960/memcpy.S
deleted file mode 100644
index 8465e474b..000000000
--- a/newlib/libc/machine/i960/memcpy.S
+++ /dev/null
@@ -1,160 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memcpy.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure memmove  (optimized assembler version for the 80960K series)
-	procedure memcpy   (optimized assembler version for the 80960K series)
-
-	dest_addr = memmove (dest_addr, src_addr, len)
-	dest_addr = memcpy  (dest_addr, src_addr, len)
-
-	copy len bytes pointed to by src_addr to the space pointed to by 
-	dest_addr.  Return the original dest_addr.
-
-	These routines will work even if the arrays overlap.  The standard
-	requires this of memmove, but memcpy is allowed to fail if overlap
-	is present.  Nevertheless, it is implemented the same as memmove
-	because the overhead is trifling.
-
-	Undefined behavior will occur if the end of the source array is in 
-	the last two words of the program's allocated memory space.  This 
-	is so because the routine fetches ahead.  Disallowing the fetch 
-	ahead would impose a severe performance penalty.
-
-	Strategy:
-
-	Fetch the source array by words and store them by words to the
-	destination array, until there are fewer than three bytes left
-	to copy.  Then, using the last word of the source (the one that
-	contains the remaining 0, 1, 2, or 3 bytes to be copied), store
-	a byte at a time until Ldone.
-
-	Tactics:
-
-	1) Do NOT try to fetch and store the words in a word aligned manner 
-	because, in my judgement, the performance degradation experienced due 
-	to non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  This is supported by the intuition that most source and
-	destination arrays (even more true of most big source arrays) will 
-	be word aligned to begin with.
-
-	2) For non-overlapping arrays, rather than decrementing len to zero,
-	I calculate the address of the byte after the last byte of the 
-	destination array, and quit when the destination byte pointer passes 
-	that.  
-
-	3) For overlapping arrays where the source starts at a lower address
-	than the destination the move is performed in reverse order.
-
-	4) Overlapping arrays where the source starts at a higher address
-	are treated like non-overlapping case.  Where the two arrays exactly
-	coincide, the routine is short-circuited;  no move is Ldone at all.
-	This costs only one cycle.
-*/
-
-	.globl _memcpy, _memmove
-	.globl __memcpy, __memmove
-	.leafproc _memmove, __memmove
-	.leafproc _memcpy, __memcpy
-	.align    2
-_memmove:
-_memcpy:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__memmove:
-__memcpy:
-	mov	g14, g13	# preserve return address
-	cmpibge	0,g2,Lexit	# exit if number of bytes to move is <= zero.
-	cmpo	g0,g1		# does start of dest overlap end of src?
-	addo	g2,g1,g3
-	be	Lexit		# no move necessary if src and dest are same
-	concmpo	g3,g0
-	addo	g2, g0, g6
-	bg	Lbackwards	# if overlap, then do move backwards
-
-	ld	(g1), g7	# fetch first word of source
-	mov	g0, g5
-	b	Lwloop_b
-
-Lwloop_a:
-	ld	(g1), g7	# fetch ahead next word of source
-	st	g4, (g5)	# store word to dest
-	addo	4, g5, g5	# post-increment dest pointer
-Lwloop_b:			# word copying loop
-	addo	4, g1, g1	# pre-increment src pointer
-	cmpo	g3, g1		# is len <= 3 ?
-	mov	g7, g4		# keep a copy of the current word
-	bge	Lwloop_a		# loop if more than 3 bytes to move
-	cmpobe	g6, g5, Lexit    # quit if no more bytes to move
-
-Lcloop_a:			# character copying loop (len < 3)
-	stob	g4, (g5)	# store a byte
-	shro	8, g4, g4	# position next byte for storing
-	addo	1, g5, g5        
-	cmpobne	g6, g5, Lcloop_a	# quit if no more bytes to move
-
-Lexit:
-	mov	0, g14
-	bx	(g13)		# g0 = dest array address; g14 = 0
-Lrett:	
-	ret
-
-Lwloop.a:
-	subo	4, g6, g6	# pre-decrement dest pointer
-	st	g7, (g6)	# store word to dest
-Lbackwards:			# word copying loop
-	subo	4, g3, g3	# pre-decrement src pointer
-	cmpo	g1, g3		# is len <= 3?
-	ld	(g3), g7	# fetch ahead next word of source
-	ble	Lwloop.a		# loop if more than 3 bytes to move
-	cmpobe	g6, g0, Lexit	# quit if no more bytes to move
-
-Lcloop.a:
-	subo	1, g6, g6	
-	rotate	8, g7, g7	# position byte for storing
-	stob	g7, (g6)	# store byte
-	cmpobne	g6, g0, Lcloop.a	# quit if no more bytes to move
-	b	Lexit
-
-/* end of memmove */
diff --git a/newlib/libc/machine/i960/memcpy_ca.S b/newlib/libc/machine/i960/memcpy_ca.S
deleted file mode 100644
index eebfa88a1..000000000
--- a/newlib/libc/machine/i960/memcpy_ca.S
+++ /dev/null
@@ -1,353 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memcp_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1992,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memmove  (optimized assembler version for the CA)
-	procedure memcpy   (optimized assembler version for the CA)
-
-	dest_addr = memmove (dest_addr, src_addr, len)
-	dest_addr = memcpy  (dest_addr, src_addr, len)
-
-	copy len bytes pointed to by src_addr to the space pointed to by 
-	dest_addr.  Return the original dest_addr.
-
-	Memcpy will fail if the source and destination string overlap 
-	(in particular, if the end of the source is overlapped by the 
-	beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-	Memmove will not fail if overlap exists.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, the
-	routine will fetch ahead one word.  Disallowing the fetch ahead would 
-	impose a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source is word aligned, destination is not
-	4) destination is word aligned, source is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  dest ptr;  not modified, so that it may be returned
-	g1  src ptr;  shift count
-	g2  len
-	g3  src ptr (word aligned)
-	g4  dest ptr (word aligned)
-	g5  -4 for Lbackwards move
-	Little endian
-		g6  lsw of double word for extraction of 4 bytes
-		g7  msw of double word for extraction of 4 bytes
-	Big endian
-		g6  msw of double word for extraction of 4 bytes
-		g7  lsw of double word for extraction of 4 bytes
-	g13 return address
-	g14 byte extracted.
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g6
-#define LSW g7
-#else
-#define LSW g6
-#define MSW g7
-#endif
-
-	.globl	_memmove, _memcpy
-	.globl	__memmove, __memcpy
-	.leafproc	_memmove, __memmove
-	.leafproc	_memcpy,  __memcpy
-	.align	2
-_memcpy:
-_memmove:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memcpy:
-__memmove:
-	cmpibge.f 0,g2,Lquick_exit # Lexit if number of bytes to move is <= zero.
-	cmpo	g0,g1		# if dest starts earlier than src ...
-	 lda	(g14),g13	# preserve return address
-	addo	g2,g1,g5	# compute addr of byte after last byte of src
-	 be.f	Lexit_code	# no move necessary if src and dest are same
-	concmpo	g5,g0		# ... or if dest starts after end of src ...
-	notand	g1,3,g3		# extract word addr of start of src
-	 bg.f	Lbackwards	# ... then drop thru, else do move backwards
-	cmpo	g3,g1		# check alignment of src
-	 ld	(g3),LSW	# fetch word containing at least first byte
-	notand	g0,3,g4		# extract word addr of start of dest
-	 lda	4(g3),g3	# advance src word addr
-	 bne.f	Lcase_245	# branch if src is NOT word aligned
-
-Lcase_13:
-	cmpo	g0,g4		# check alignment of dest
-	subo	4,g4,g4		# store is pre-incrementing;  back up dest addr
-	 be.t	Lcase_1		# branch if dest word aligned
-
-Lcase_3:				# src is word aligned; dest is not
-	addo	8,g4,g4		# move dest word ptr to first word boundary
-	 lda	(g0),g1		# copy dest byte ptr
-	mov	LSW,MSW		# make copy of first word of src
-	 lda	32,g14		# initialize shift count to zero (mod 32)
-
-Lcase_25:
-Lcase_3_cloop_at_start:		# character copying loop for start of dest str
-	cmpdeci	0,g2,g2		# is max_bytes exhausted?
-	be.f	Lexit_code	# Lexit if max_bytes is exhausted
-#if __i960_BIG_ENDIAN__
-	rotate	8,MSW,MSW	# move next byte into position for extraction
-	subo	8,g14,g14	# augment the shift counter
-	 stob	MSW,(g1)	# store the byte in dest
-#else
-	addo	8,g14,g14	# augment the shift counter
-	 stob	MSW,(g1)	# store the byte in dest
-	shro	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	 lda	1(g1),g1	# post-increment dest ptr
-	cmpobne.t g1,g4,Lcase_3_cloop_at_start # branch if reached word boundary
-
-	ld	(g3),MSW	# fetch msw of operand for double shift
-
-Lcase_4:
-Lcase_3_wloop:
-	cmpi	g2,4		# less than four bytes to move?
-	 lda	4(g3),g3	# post-increment src word addr
-	eshro	g14,g6,g1	# extract 4 bytes of src
-	 bl.f	Lcase_3_cloop	# branch if < four bytes left to move
-	mov	MSW,LSW		# move msw to lsw
-	 ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	 b	Lcase_3_wloop
-
-Lcase_1_wloop:			# word copying loop
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 ld	(g3),LSW	# pre-fetch next word of src
-	addo	4,g3,g3		# post-increment src addr
-	 st	g1,(g4)		# store word in dest string
-Lcase_1:				# src and dest are word aligned
-	cmpi	g2,4		# check for fewer than four bytes to move
-	addo	4,g4,g4		# pre-increment dest addr
-	 lda	(LSW),g1	# keep a copy of the src word
-	 bge.t	Lcase_1_wloop	# branch if at least four bytes to copy
-Lcase_3_cloop:
-	cmpibe.f 0,g2,Lexit_code	# Lexit if max_bytes is exhausted
-
-Lcase_1_cloop:
-#if __i960_BIG_ENDIAN__
-	rotate	8,g1,g1		# move next byte into position for extraction
-#endif
-	subi	1,g2,g2
-	 stob	g1,(g4)		# store the byte in dest
-	cmpi	0,g2
-	 lda	1(g4),g4	# post-increment dest byte addr
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# move next byte into position for extraction
-#endif
-	 bne.t	Lcase_1_cloop	# Lexit if max_bytes is exhausted
-
-Lexit_code:
-	mov	0,g14		# conform to register conventions
-	bx	(g13)		# g0 = addr of dest;  g14 = 0
-Lrett:
-	ret
-
-
-Lcase_245:
-	cmpo	g0,g4		# check alignment of dest
-	 ld	(g3),MSW	# pre-fetch second half
-	and	3,g1,g1		# compute shift count
-	shlo	3,g1,g14	
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian
-#endif
-	 be.t	Lcase_4		# branch if dest is word aligned
-	or	g4,g1,g1	# is src earlier in word, later, or sync w/ dst
-	cmpo    g0,g1		# < indicates first word of dest has more bytes
-	 lda	4(g4),g4	# move dest word addr to first word boundary
-	eshro	g14,g6,g5	# extract four bytes
-	 lda	(g0),g1
-#if __i960_BIG_ENDIAN__
-	 bge.f	1f
-#else
-	 bg.f	1f
-#endif
-	mov	MSW,LSW
-	 lda	4(g3),g3	# move src word addr to second word boundary
-1:
-	mov	g5,MSW
-	 b	Lcase_25
-
-
-Lbackwards:
-	notand	g5,3,MSW	# extract word addr of byte after end of src
-	cmpo	MSW,g5		# check alignment of end of src
-	subo	4,MSW,g3	# retreat src word addr
-	addo	g2,g0,g1	# compute addr of byte after end of dest
-	notand	g1,3,g4		# extract word addr of start of dest
-	 bne.f	Lcase.245	# branch if src is NOT word aligned
-
-Lcase.13:
-	cmpo	g1,g4		# check alignment of dest
-	 ld	(g3),MSW	# fetch last word of src
-	subo	4,g3,g3		# retreat src word addr
-	 be.t	Lcase.1		# branch if dest word aligned
-
-Lcase.3:			# src is word aligned; dest is not
-	mov	MSW,LSW		# make copy of first word of src
-	 lda	32,g14		# initialize shift count to zero (mod 32)
-
-Lcase.25:
-Lcase.3_cloop_at_start:		# character copying loop for start of dest str
-	cmpdeci	0,g2,g2		# is max.bytes exhausted?
-	 be.f	Lexit_code	# Lexit if max_bytes is exhausted
-#if ! __i960_BIG_ENDIAN__
-	rotate	8,LSW,LSW	# move next byte into position for storing
-#endif
-	 lda	-1(g1),g1	# pre-decrement dest ptr
-	cmpo	g1,g4		# have we reached word boundary in dest yet?
-	 stob	LSW,(g1)	# store the byte in dest
-#if __i960_BIG_ENDIAN__
-	shro	8,LSW,LSW	# move next byte into position for storing
-	addo	8,g14,g14	# augment the shift counter
-#else
-	subo	8,g14,g14	# augment the shift counter
-#endif
-	 bne.t	Lcase.3_cloop_at_start	# branch if reached word boundary?
-
-	ld	(g3),LSW	# fetch lsw of operand for double shift
-
-#if __i960_BIG_ENDIAN__
-	cmpobne	0,g14,Lcase.3_wloop
-Lcase.3_wloop2:
-	cmpi	g2,4		# less than four bytes to move?
-	 lda	-4(g3),g3	# post-decrement src word addr
-	mov	MSW,g1 		# extract 4 bytes of src
-	 lda	(LSW),MSW	# move lsw to msw
-	subo	4,g4,g4		# pre-decrement dest ptr
-	 bl.f	Lcase.3_cloop	# branch if < four bytes left to move
-	 ld	(g3),LSW	# pre-fetch lsw of operand for double shift
-	subi	4,g2,g2		# decrease max.byte count by the 4 bytes moved
-	 st	g1,(g4)		# store 4 bytes to dest
-	 b	Lcase.3_wloop2
-#endif
-
-Lcase.4:
-Lcase.3_wloop:
-	cmpi	g2,4		# less than four bytes to move?
-	 lda	-4(g3),g3	# post-decrement src word addr
-	eshro	g14,g6,g1	# extract 4 bytes of src
-	 lda	(LSW),MSW	# move lsw to msw
-	subo	4,g4,g4		# pre-decrement dest ptr
-	 bl.f	Lcase.3_cloop	# branch if < four bytes left to move
-	ld	(g3),LSW	# pre-fetch lsw of operand for double shift
-	subi	4,g2,g2		# decrease max.byte count by the 4 bytes moved
-	 st	g1,(g4)		# store 4 bytes to dest
-	 b	Lcase.3_wloop
-
-Lcase.1_wloop:			# word copying loop
-	subi	4,g2,g2		# decrease max.byte count by the 4 bytes moved
-	 ld	(g3),MSW	# pre-fetch next word of src
-	subo	4,g3,g3		# post-decrement src addr
-	 st	g1,(g4)		# store word in dest string
-Lcase.1:				# src and dest are word aligned
-	cmpi	g2,4		# check for fewer than four bytes to move
-	subo	4,g4,g4		# pre-decrement dest addr
-	 lda	(MSW),g1	# keep a copy of the src word
-	 bge.t	Lcase.1_wloop	# branch if at least four bytes to copy
-Lcase.3_cloop:
-	cmpibe.f 0,g2,Lexit_code	# Lexit if max_bytes is exhausted
-#if ! __i960_BIG_ENDIAN__
-	rotate	8,g1,g1		# move next byte into position for storing
-#endif
-	 lda	4(g4),g4	# pre-decremented dest addr 4 too much
-
-Lcase.1_cloop:
-	subi	1,g4,g4		# pre-decrement dest byte addr
-	cmpi	g4,g0		# has dest ptr reached beginning of dest?
-	 stob	g1,(g4)		# store the byte in dest
-#if __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# move next byte into position for storing
-#else
-	rotate	8,g1,g1		# move next byte into position for storing
-#endif
-	 bne.t	Lcase.1_cloop	# Lexit if move is completed
-	b	Lexit_code
-
-Lcase.245:
-	cmpo	g1,g4		# check alignment of dest
-	 ld	(MSW),MSW	# pre-fetch word with at least last byte
-	and	3,g5,g5		# compute shift count
-	 ld	(g3),LSW	# pre-fetch second to last word
-	shlo	3,g5,g14	
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian
-#endif
-	 be.t	Lcase.4		# branch if dest is word aligned
-	or	g4,g5,g5	# is src earlier in word, later, or sync w/ dst
-	cmpo    g1,g5		# < indicates last word of dest has less bytes
-	eshro	g14,g6,g5	# extract four bytes
-	 bl.t	1f
-	mov	LSW,MSW
-#if ! __i960_BIG_ENDIAN__
-	 be.t	1f
-#endif
-	subo	4,g3,g3		# move src word addr to second word boundary
-1:
-	mov	g5,LSW
-	 b	Lcase.25
-
-
-Lquick_exit:
-	mov	g14,g13
-	 b	Lexit_code
-
-/* end of memmove */
diff --git a/newlib/libc/machine/i960/memset.S b/newlib/libc/machine/i960/memset.S
deleted file mode 100644
index 9121d4524..000000000
--- a/newlib/libc/machine/i960/memset.S
+++ /dev/null
@@ -1,121 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "memset.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure memset  (optimized assembler version: 80960K series, 80960CA)
-
-	dest_addr = memset (dest_addr, char, len)
-
-	Fill len bytes pointed to by dest_addr with the value of char.
-        Return the original address of dest_addr.
-
-        This program avoids performing unaligned accesses.  It stores
-        from zero to seven bytes, and then stores aligned longwords,
-        and then stores from zero to seven bytes, as necessary to
-        store len bytes starting at dest_addr.
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.
-*/
-
-	.globl	_memset
-	.globl	__memset
-	.leafproc	_memset, __memset
-	.align	2
-_memset:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__memset:
-	cmpo	7,g2		# are there fewer than seven characters to move?
-	 lda	(g14),g13	# save return address
-	notand	g0,7,g3		# test for non-aligned dest_ptr
-	 lda	0,g14		# conform to register conventions
-	shlo	24,g1,g4	# prepare word of char
-	 lda	(g0),g6		# preserve dest_ptr for return
-	shro	8,g4,g5
-	 bge.f	Lcloop_setup
-	cmpo	g3,g0		# is dest longword aligned
-	 lda	7(g3),g3	# bump dest_ptr to next longword boundary
-	or	g4,g5,g4
-	 be.t	Lwloop_setup
-
-Lbgn_cloop:
-	cmpo	g6,g3		# Have we reached longword boundary?
-	 stob	g1,(g6)		# store one byte of char
-	subo	1,g2,g2		# decrement len
-	 lda	1(g6),g6	# increment dest_ptr
-	bne.t	Lbgn_cloop	# loop if more bytes to store before longword
-
-	cmpobge.f 7,g2,Lcloop
-
-Lwloop_setup:
-	shro	16,g4,g5
-	or	g4,g5,g4
-	mov	g4,g5		# now have a longword of char
-
-Lwloop:
-	cmpo	15,g2		# Do we have to store more longwords?
-	 stl	g4,(g6)		# Store longword of char
-	subo	8,g2,g2		# Decrement len
-	 lda	8(g6),g6	# Increment dest_ptr
-	bl.t	Lwloop		# loop if more longwords to store
-
-Lcloop_setup:
-	cmpobge.t 0,g2,Lexit
-
-Lcloop:
-	cmpo	1,g2		# Is len exhausted?
-	 stob	g1,(g6)		# Store byte
-	subo	1,g2,g2		# Decrement len
-	 lda	1(g6),g6	# Increment dest_ptr
-	bne.t	Lcloop		# loop if more bytes to store
-
-Lexit:	
-	bx	(g13)
-Lrett:	
-	ret
-
-/* end of memset */
diff --git a/newlib/libc/machine/i960/setjmp.S b/newlib/libc/machine/i960/setjmp.S
deleted file mode 100644
index 804df0e0f..000000000
--- a/newlib/libc/machine/i960/setjmp.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-/******************************************************************************/
-/*                                                                            */
-/*      setjmp(), longjmp()                                                   */
-/*                                                                            */
-/******************************************************************************/
-	.file "setjmp.as"
-	.text
-	/* .link_pix */
-
-	.align	4
-	.globl	_setjmp
-_setjmp:
-	flushreg
-	andnot	0xf,pfp,g1	/* get pfp, mask out return status bits */
-	st	g1, 0x58(g0)	/* save fp of caller*/
-   /* save globals not killed by the calling convention */
-	stq	g8, 0x40(g0)	/* save g8-g11*/
-	st	g12, 0x50(g0)	/* save g12*/
-	st	g14, 0x54(g0)	/* save g14*/
-   /* save previous frame local registers */
-	ldq	(g1), g4	/* get previous frame pfp, sp, rip, r3 */
-	stq	g4, (g0)	/* save pfp, sp, rip, r3 */
-	ldq	0x10(g1), g4	/* get previous frame r4-r7 */
-	stq	g4, 0x10(g0)	/* save r4-r7 */
-	ldq	0x20(g1), g4	/* get previous frame r8-r11 */
-	stq	g4, 0x20(g0)	/* save r8-r11 */
-	ldq	0x30(g1), g4	/* get previous frame r12-r15 */
-	stq	g4, 0x30(g0)	/* save r12-r15 */
-
-	mov	0, g0		/* return 0 */
-	ret
-
-   /*
-    * fake a return to the place that called the corresponding _setjmp
-   */
-	.align	4
-	.globl	_longjmp
-_longjmp:
-	call	0f		/* ensure there is at least one stack frame */
-
-0:
-	flushreg		/* do this before swapping stack */
-	ld	0x58(g0), pfp	/* get fp of caller of setjmp */
-   /* restore local registers 
-    * the following code modifies the frame of the function which originally 
-    *  called setjmp.
-    */
-	ldq	(g0), g4	/* get pfp, sp, rip, r3 */
-	stq	g4, (pfp)	/* restore pfp, sp, rip, r3 */
-	ldq	0x10(g0), g4	/* get r4-r7 */
-	stq	g4, 0x10(pfp)	/* restore r4-r7 */
-	ldq	0x20(g0), g4	/* get r8-r11 */
-	stq	g4, 0x20(pfp)	/* restore r8-r11 */
-	ldq	0x30(g0), g4	/* get r12-r15 */
-	stq	g4, 0x30(pfp)	/* restore r12-r15 */
-   /* restore global registers */
-	ldq	0x40(g0), g8	/* get old g8-g11 values */
-	ld	0x50(g0), g12	/* get old g12 value */
-	ld	0x54(g0), g14	/* get old g14 value */
-
-	mov	g1, g0		/* get return value */
-	cmpo	g0, 0		/* make sure it is not zero */
-	bne	0f
-	mov	1, g0		/* return 1 by default */
-0:
-	ret			/* return to caller of _setjmp */
diff --git a/newlib/libc/machine/i960/strchr.S b/newlib/libc/machine/i960/strchr.S
deleted file mode 100644
index bc50c2c41..000000000
--- a/newlib/libc/machine/i960/strchr.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strchr.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strchr  (optimized assembler version for the 80960K series)
-
-	src_addr = strchr (src_addr, char)
-
-	return a pointer to the first byte that contains the indicated
-	byte in the source string.  Return null if the byte is not found.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last two words of the program's
-	allocated memory space.  This is so because strchr fetches ahead.  
-	Disallowing the fetch ahead would impose a severe performance penalty.
-
-	Strategy:
-
-	Fetch the source string by words and scanbyte the words for the 
-	char until either a word with the byte is found or the null byte is
-	encountered.  In the former case, move through the word to find the
-	matching byte and return its memory address.  In the latter case, 
-	return zero (null).
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble that would be necessary to assure alignment.  This 
-	is supported by the intuition that most source arrays (even more 
-	true of most big source arrays) will be word aligned to begin with.
-*/
-
-	.globl	_strchr
-	.globl	__strchr
-	.leafproc	_strchr, __strchr
-	.align	2
-_strchr:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strchr:
-
-	ld	(g0),g4		# fetch first word
-	lda	0xff,g7		# byte extraction mask
-	and	g1,g7,g1	# make char an 8-bit ordinal
-	shlo	8,g1,g2		# broadcast the char to four bytes
-	or	g1,g2,g2
-	shlo	16,g2,g5
-	or	g2,g5,g3
-	mov	g14,g13		# preserve return address
-	addo	4,g0,g0		# post-increment src pointer
-	mov	0,g14		# conform to register linkage standard
-
-Lsearch_for_word_with_char_or_null:
-	mov	g4,g5		# copy word
-	scanbyte g3,g5		# check for byte with char
-	ld	(g0),g4		# fetch next word of src
-	bo	Lsearch_for_char	# branch if char found 
-	scanbyte 0,g5		# check for null byte
-	addo	4,g0,g0		# post-increment src pointer
-	bno	Lsearch_for_word_with_char_or_null	# branch if not null
-
-Lnot_found:
-	mov	0,g0		# char not found.  Return null
-Lexit_code:
-	bx	(g13)		# g0 = addr of char in src (or null);  g14 = 0
-Lrett:
-	ret
-
-Lsearch_for_char:
-	subo	5,g0,g0		# back up the byte pointer
-Lsearch_for_char.a:
-	and	g5,g7,g6	# extract byte
-	cmpo	g1,g6		# is it char?
-	addo	1,g0,g0		# bump src byte ptr
-	shro	8,g5,g5		# shift word to position next byte
-	be	Lexit_code
-	cmpobne 0,g6,Lsearch_for_char.a	# quit if null comes before char
-	b	Lnot_found
-
-/* end of strchr */
diff --git a/newlib/libc/machine/i960/strchr_ca.S b/newlib/libc/machine/i960/strchr_ca.S
deleted file mode 100644
index f52eae217..000000000
--- a/newlib/libc/machine/i960/strchr_ca.S
+++ /dev/null
@@ -1,152 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strch_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strchr  (optimized assembler version for the CA)
-
-	src_addr = strchr (src_addr, char)
-
-	return a pointer to the first byte that contains the indicated
-	byte in the source string.  Return null if the byte is not found.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last two words of the program's
-	allocated memory space.  This is so because, in several cases, strchr
-	will fetch ahead.  Disallowing the fetch ahead would impose a severe 
-	performance penalty.
-
-	This program handles two cases:
-
-	1) the argument starts on a word boundary
-	2) the argument doesn't start on a word boundary
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  src ptr;  upon return it is a pointer to the matching byte, or null
-	g1  char to seek
-	g2  mask to avoid unimportant bytes in first word
-	g3  char to seek, broadcast to all four bytes 
-	g4  word of the source string
-	g5  copy of the word
-	g6  extracted character
-	g7  byte extraction mask
-	g13 return address
-	g14 
-*/
-
-	.globl	_strchr
-	.globl	__strchr
-	.leafproc	_strchr, __strchr
-	.align	2
-_strchr:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strchr:
-
-	lda	0xff,g7		# byte extraction mask
-	and	g1,g7,g1	# make char an 8-bit ordinal
-	shlo	8,g1,g2		# broadcast the char to four bytes
-	or	g1,g2,g2
-	shlo	16,g2,g4
-	cmpo	g1,g7		# is char being sought 0xff?
-	or	g4,g2,g3
-	 lda	(g14),g13	# preserve return address
-	notand	g0,3,g5		# extract word addr of start of src
-	 lda	0,g14		# conform to register linkage standard
-	and	g0,3,g6		# extract byte offset of src
-	 ld	(g5),g4		# fetch word containing at least first byte
-	shlo	3,g6,g6		# get shift count for making mask for first word
-	 lda	4(g5),g0	# post-increment src word pointer
-	subi	1,0,g5		# mask initially all ones
-#if __i960_BIG_ENDIAN__
-	shro	g6,g5,g5	# get mask for bytes needed from first word
-#else
-	shlo	g6,g5,g5	# get mask for bytes needed from first word
-#endif
-	notor	g4,g5,g4	# set unneeded bytes to all ones
-	 be.f	Lsearch_for_0xff	# branch if seeking 0xff
-
-Lsearch_for_word_with_char_or_null:
-	scanbyte g3,g4		# check for byte with char
-	 lda	(g4),g5		# copy word
-	ld	(g0),g4		# fetch next word of src
-	 bo.f	Lsearch_for_char	# branch if null found 
-	scanbyte 0,g5		# check for null byte
-	 lda	4(g0),g0	# post-increment src word pointer
-	bno.t	Lsearch_for_word_with_char_or_null	# branch if not null
-
-Lnot_found:
-	mov	0,g0		# char not found.  Return null
-Lexit_code:
-	bx	(g13)		# g0 = addr of char in src (or null);  g14 = 0
-Lrett:
-	ret
-
-Lsearch_for_char:
-	subo	5,g0,g0		# back up the byte pointer
-Lsearch_for_char.a:
-#if __i960_BIG_ENDIAN__
-	rotate	8,g5,g5		# shift word to position next byte
-#endif
-	and	g5,g7,g6	# extract byte
-	cmpo	g1,g6		# is it char?
-	 lda	1(g0),g0	# bump src byte ptr
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g5,g5		# shift word to position next byte
-#endif
-	 be.f	Lexit_code
-	cmpobne.t 0,g6,Lsearch_for_char.a	# quit if null comes before char
-	b	Lnot_found
-
-Lsearch_for_0xff:
-	lda	0xf0f0f0f0,g2	# make first comparison mask for char=-1 case.
-	or	g5,g2,g2
-	and	g4,g2,g4	# make unimportant bytes of first word 0x0f
-	 b	Lsearch_for_word_with_char_or_null
-
-/* end of strchr */
-
diff --git a/newlib/libc/machine/i960/strcmp.S b/newlib/libc/machine/i960/strcmp.S
deleted file mode 100644
index c0cd4bd6f..000000000
--- a/newlib/libc/machine/i960/strcmp.S
+++ /dev/null
@@ -1,118 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strcmp.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure strcmp  (optimized assembler version for the 80960K Series)
-
-	result = strcmp (src1_addr, src2_addr)
-
-	compare the null terminated string pointed to by src1_addr to 
-	the string pointed to by src2_addr.  Return 0 iff the strings
-	are equal, -1 if src1_addr is lexicographically less than src2_addr,
-	and 1 if it is lexicographically greater.
-
-	Undefined behavior will occur if the end of either source string
-	(i.e. the terminating null byte) is in the last two words of the 
-	program's allocated memory space.  This is so because strcmp fetches
-	ahead.  Disallowing the fetch ahead would impose a severe performance 
-	penalty.
-
-	Strategy:
-
-	Fetch the source strings by words and compare the words until either 
-	differing words are found or the null byte is encountered.  In either
-	case, move through the word until either the differing byte if found,
-	in which case return -1 or 1 appropriately;  or the null byte is 
-	encountered, in which case, return zero (equality).
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  This is supported by the intuition that many source 
-	strings will be word aligned to begin with.
-*/
-
-	.globl _strcmp
-	.globl __strcmp
-	.leafproc _strcmp,__strcmp
-	.align 2
-
-_strcmp:
-#ifndef __PIC
-	lda	.Lrett,g14
-#else
-	lda	.Lrett-(.+8)(ip),g14
-#endif
-__strcmp:
-	ld	(g0), g5	# fetch first word of source_1
-	mov	g14,g7		# preserve return address
-	ldconst 0,g14		# conform to register conventions
-	ldconst 0xff,g4		# byte extraction mask
-.Lwloop:
-	addo     4,g0,g0	# post-increment source_1 byte ptr
-	ld	(g1), g3	# fetch word of source_2
-	scanbyte 0,g5		# does word have a null byte?
-        mov      g5,g2		# save a copy of the source_1 word
-	be .Lcloop		# branch if null byte encountered
-	cmpo	 g2,g3		# are the source words the same?
-	addo     4,g1,g1	# post-increment source_2 byte ptr
-	ld	(g0), g5	# fetch ahead next word of source_1
-	be	 .Lwloop		# fall thru if words are unequal
-
-.Lcloop: and	g4,g2,g5  	# extract and compare individual bytes
-	and	g4,g3,g6
-	cmpobne	g5,g6,.diff	# if they differ, go return 1 or -1
-	cmpo    0,g6		# they are the same.  Are they null?
-	shlo	8,g4,g4		# position mask for next extraction
-	bne	.Lcloop		# loop if null not encountered
-
-	mov	0,g0		# return equality
-	bx	(g7)
-.Lrett:	
-	ret
-.diff:	bl	.neg
-        mov     1,g0
-	bx	(g7)
-.neg:	subi    1,0,g0
-.Lexit: 	
-	bx	(g7)
diff --git a/newlib/libc/machine/i960/strcmp_ca.S b/newlib/libc/machine/i960/strcmp_ca.S
deleted file mode 100644
index 0298ffa0d..000000000
--- a/newlib/libc/machine/i960/strcmp_ca.S
+++ /dev/null
@@ -1,246 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strcm_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strcmp  (optimized assembler version for the CA)
-
-	result = strcmp (src1_addr, src2_addr)
-
-	compare the null terminated string pointed to by src1_addr to 
-	the string space pointed to by src2_addr.  Return 0 iff the strings
-	are equal, -1 if src1_addr is lexicly less than src2_addr, and 1
-	if it is lexicly greater.
-
-	Undefined behavior will occur if the end of either source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, strcmp
-	will fetch ahead one word.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source1 is word aligned, source2 is not
-	4) source2 is word aligned, source1 is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g14 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers are sufficient to implement the routine.
-	The registers are used as follows:
-
-	g0  original src1 ptr;  return result
-	g1  src2 ptr;  0xff  --  byte extraction mask
-	g2  src1 word ptr
-	g3  src2 word ptr 
-	Little endian:
-		g4  lsw of src1
-		g5  msw of src1
-		g6  src2 word
-		g7  extracted src1
-	Big endian:
-		g4  msw of src1
-		g5  lsw of src1
-		g6  extracted src1
-		g7  src2 word
-	g13 return address
-	g14 shift count
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g4
-#define LSW g5
-#define SRC1 g6
-#define SRC2 g7
-#else
-#define LSW g4
-#define MSW g5
-#define SRC2 g6
-#define SRC1 g7
-#endif
-
-	.globl	_strcmp
-	.globl	__strcmp
-	.leafproc	_strcmp, __strcmp
-	.align	2
-_strcmp:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-
-__strcmp:
-Lrestart:
-	notand	g0,3,g2		# extract word addr of start of src1
-	 lda	(g14),g13	# preserve return address
-#if __i960_BIG_ENDIAN__
-	cmpo	g0,g2		# check alignment of src1
-#endif
-	 ld	(g2),LSW	# fetch word with at least first byte of src1
-	notand	g1,3,g3		# extract word addr of start of src2
-	 ld	4(g2),MSW	# fetch second word of src1
-#if __i960_BIG_ENDIAN__
-	 bne	Lsrc1_unaligned	# branch if src1 is unaligned
-	cmpo	g3,g1		# check alignment of src2
-	 ld	(g3),SRC2	# fetch word with at least first byte of src2
-	mov	LSW,SRC1	# extract word of src1
-	 lda	8(g2),g2	# advance src1 word addr
-	 bne.f	Lsrc2_unaligned	# branch if src2 is NOT word aligned
-
-				/* src2 is word aligned */
-
-Lwloop2:				# word comparing loop
-	cmpo	SRC2,SRC1	# compare src1 and src2 words
-	 lda	0xff000000,g1	# byte extraction mask
-	mov	MSW,LSW		# move msw of src1 to lsw
-	 ld	(g2),MSW	# pre-fetch next msw of src1
-	addo	4,g2,g2		# post-increment src1 addr
-	 lda	4(g3),g3	# pre-increment src2 addr
-	 bne.f	Lcloop		# branch if src1 and src2 unequal
-	scanbyte 0,SRC1		# check for null byte in src1 word
-	 ld	(g3),SRC2	# pre-fetch next word of src2
-	mov	LSW,SRC1	# extract word of src1
-	 lda	0,g0		# prepare to return zero, indicating equality
-	bno.t	Lwloop2		# branch if null byte not encountered
-
-				/* words were equal and contained null byte */
-
-	mov	0,g14		# conform to register conventions
-	 bx	(g13)		# return
-	
-
-Lsrc1_unaligned:
-#endif
-	cmpo	g3,g1		# check alignment of src2
-	 ld	(g3),SRC2	# fetch word with at least first byte of src2
-	shlo	3,g0,g14	# compute shift count for src1
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# 32 - shift count for big endian.
-#endif
-	eshro	g14,g4,SRC1	# extract word of src1
-	 lda	8(g2),g2	# advance src1 word addr
-	 bne.f	Lsrc2_unaligned	# branch if src2 is NOT word aligned
-
-				/* at least src2 is word aligned */
-
-Lwloop:				# word comparing loop
-	cmpo	SRC2,SRC1	# compare src1 and src2 words
-#if __i960_BIG_ENDIAN__
-	 lda	0xff000000,g1	# byte extraction mask
-#else
-	 lda	0xff,g1		# byte extraction mask
-#endif
-	mov	MSW,LSW		# move msw of src1 to lsw
-	 ld	(g2),MSW	# pre-fetch next msw of src1
-	addo	4,g2,g2		# post-increment src1 addr
-	 lda	4(g3),g3	# pre-increment src2 addr
-	 bne.f	Lcloop		# branch if src1 and src2 unequal
-	scanbyte 0,SRC1		# check for null byte in src1 word
-	 ld	(g3),SRC2	# pre-fetch next word of src2
-	eshro	g14,g4,SRC1	# extract word of src1
-	 lda	0,g0		# prepare to return zero, indicating equality
-	bno.t	Lwloop		# branch if null byte not encountered
-
-				/* words were equal and contained null byte */
-
-	mov	0,g14		# conform to register conventions
-	 bx	(g13)		# return
-	
-Lcloop_setup:			# setup for coming from Lsrc2_unaligned
-	mov	LSW,SRC1	# restore extracted src1 word
-#if __i960_BIG_ENDIAN__
-	 lda	0xff000000,g1	# byte extraction mask
-#else
-	 lda	0xff,g1		# byte extraction mask
-#endif
-
-Lcloop:				# character comparing loop
-	and	SRC2,g1,g3	# extract next char of src2
-	and	SRC1,g1,g0	# extract next char of src1
-	cmpobne.f g0,g3,.diff	# check for equality
-	cmpo	0,g0		# check for null byte
-#if __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# shift mask for next byte
-#else
-	shlo	8,g1,g1		# shift mask for next byte
-#endif
-	 bne.t	Lcloop		# branch if null not reached
-
-				/* words are equal up thru null byte */
-
-	mov	0,g14
-	 bx	(g13)		# g0 = 0 (src1 == src2)
-Lrett:
-	ret
-
-.diff:
-	mov	0,g14
-	 bl	Lless_than_exit
-Lgreater_than_exit:
-	mov	1,g0
-	 bx	(g13)		# g0 = 1 (src1 > src2)
-Lless_than_exit:
-	subi	1,0,g0
-	 bx	(g13)		# g0 = -1 (src1 < src2)
-
-Lsrc2_unaligned:
-	mov	SRC1,LSW	# retain src1 extracted word
-	 ld	4(g3),SRC1	# fetch second word of src2
-	shlo	3,g1,MSW	# compute shift count for src2
-#if __i960_BIG_ENDIAN__
-	subo	MSW,0,MSW	# 32 - shift count for big endian.
-#endif
-	eshro	MSW,g6,SRC2	# extract word of src2
-	cmpo	LSW,SRC2	# compare src1 and src2 words
-	notor	g1,3,MSW	# first step in computing new src1 ptr
-	 lda	4(g3),g1	# set new src2 ptr
-	 bne.f	Lcloop_setup	# first four bytes differ
-	scanbyte 0,LSW		# check for null byte
-	 lda	(g13),g14	# prepare return pointer for Lrestart
-	subo	MSW,g0,g0	# second (final) step in computing new src1 ptr
-	 bno.t	Lrestart		# if null byte not encountered, continue 
-				/* with both string fetches shifted such that */
-				/* src2 is now word aligned. */
-	mov	0,g14		# conform to register conventions.
-	 lda	0,g0		# return indicator of equality.
-	bx	(g13)
diff --git a/newlib/libc/machine/i960/strcpy.S b/newlib/libc/machine/i960/strcpy.S
deleted file mode 100644
index ed8bb7234..000000000
--- a/newlib/libc/machine/i960/strcpy.S
+++ /dev/null
@@ -1,177 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strcpy.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure strcpy  (optimized assembler version for the 80960K series)
-	procedure strcat  (optimized assembler version for the 80960K series)
-
-	dest_addr = strcpy (dest_addr, src_addr)
-
-	copy the null terminated string pointed to by src_addr to 
-	the string space pointed to by dest_addr.  Return the original
-	dest_addr.
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last two words of the 
-	program's allocated memory space.  This is so because strcpy fetches 
-	ahead.  Disallowing the fetch ahead would impose a severe performance 
-	penalty.
-
-	Strategy:
-
-	Fetch the source string and store the destination string by words
-	until the null byte is encountered.  When the word with the null
-	byte is reached, store it by bytes up through the null byte only.
-
-	Tactics:
-
-	1) Do NOT try to fetch and store the words in a word aligned manner 
-	because, in my judgement, the performance degradation experienced due
- 	to non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  This is supported by the intuition that most source and
-	destination strings will be word aligned to begin with.
-
-
-	procedure strcat
-
-	dest_addr = strcat (dest_addr, src_addr)
-
-	Appends the string pointed to by src_addr to the string pointed
-	to by dest_addr.  The first character of the source string is
-	copied to the location initially occupied by the trailing null
-	byte of the destination string.  Thereafter, characters are copied
-	from the source to the destination up thru the null byte that
-	trails the source string.
-
-	See the strcpy routine, above, for its caveats, as they apply here too.
-
-	Strategy:
-
-	Skip to the end (null byte) of the destination string, and then drop
-	into the strcpy code.
-
-	Tactics:
-
-	Skipping to the null byte is Ldone by reading the destination string
-	in long-words and scanbyte'ing them, then examining the bytes of the 
-	word that contains the null byte, until the address of the null byte is
-	known.  Then we drop into the strcpy routine.  It is probable (approx.
-	three out of four times) that the destination string as strcpy sees
-	it will NOT be word aligned (i.e. that the null byte won't be the
-	last byte of a word).  But it is not worth the complication to that
-	routine to force word aligned memory accesses to be gaurenteed.
-*/
-	.globl _strcpy, _strcat
-	.globl __strcpy, __strcat
-	.leafproc _strcpy,__strcpy
-	.leafproc _strcat,__strcat
-	.align    2
-_strcat:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__strcat:
-	mov	g14,g13		# preserve return address
-	ldl	(g0),g4		# fetch first two words
-	addo	8,g0,g2		# post-increment src word pointer
-	lda	0xff,g3		# byte extraction mask
-
-Lsearch_for_word_with_null_byte:
-	scanbyte 0,g4		# check for null byte
-	mov	g5,g7		# copy second word
-	bo.f	Lsearch_for_null	# branch if null found 
-	scanbyte 0,g7		# check for null byte
-	ldl	(g2),g4		# fetch next pair of word of src
-	addo	8,g2,g2		# post-increment src word pointer
-	bno	Lsearch_for_word_with_null_byte	# branch if null not found yet
-
-	subo	4,g2,g2		# back up the byte pointer
-	mov	g7,g4		# move word with null to search word
-Lsearch_for_null:
-	subo	9,g2,g5		# back up the byte pointer
-Lsearch_for_null.a:
-	and	g4,g3,g6	# extract byte
-	cmpo	0,g6		# is it null?
-	addo	1,g5,g5		# bump src byte ptr
-	shro	8,g4,g4		# shift word to position next byte
-	bne	Lsearch_for_null.a
-	b	Lend_of_dest_found
-
-_strcpy:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__strcpy:
-	mov	g0, g5
-Lend_of_dest_found:
-	ld	(g1), g2	# fetch first word of source 
-	mov	g14,g6		# preserve return address
-	lda	0xff, g3	# byte extraction mask = 0xff;
-Lwloop:				# word copying loop
-	addo	4, g1, g1	# post-increment source ptr
-	scanbyte 0, g2		# does source word contain null byte?
-	mov	g2, g4		# save a copy of the source word
-	be	Lcloop		# branch if null present
-	ld	(g1), g2	# pre-fetch next word of source
-	st	g4, (g5)	# store current word
-	addo	4, g5, g5	# post-increment dest ptr
-	b	Lwloop
-
-Lcloop:				# character copying loop
-	and	g3, g4, g14	# extract next char
-	shro	8, g4, g4	# position word for next byte extraction
-	cmpo	0, g14 		# is it null?
-	stob	g14, (g5)	# store the byte
-	addo	1, g5, g5	# post-increment dest ptr
-	bne	Lcloop		# quit if null encountered
-
-	bx	(g6)		# g0 = dest string address; g14 = 0
-Lrett:	
-	ret
diff --git a/newlib/libc/machine/i960/strcpy_ca.S b/newlib/libc/machine/i960/strcpy_ca.S
deleted file mode 100644
index dbb944455..000000000
--- a/newlib/libc/machine/i960/strcpy_ca.S
+++ /dev/null
@@ -1,284 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strcp_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strcpy  (optimized assembler version for the CA)     
-
-	dest_addr = strcpy (dest_addr, src_addr)
-
-	copy the null terminated string pointed to by src_addr to 
-	the string space pointed to by dest_addr.  Return the original
-	dest_addr.
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, strcpy
-	will fetch ahead one word.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source is word aligned, destination is not
-	4) destination is word aligned, source is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  original dest ptr;  not modified, so that it may be returned.
-	g1  src ptr;  shift count
-	g2  dest ptr;  4 bytes of src
-	g3  src ptr (word aligned)
-	g4  dest ptr (word aligned)
-	g5  0xff  --  byte extraction mask
-	g6  lsw of double word for extraction of 4 bytes (little endian)
-	    msw of double word for extraction of 4 bytes (big endian)
-	g7  msw of double word for extraction of 4 bytes (little endian)
-	    lsw of double word for extraction of 4 bytes (big endian)
-	g13 return address
-	g14 byte extracted.  When reaches null byte, which is zero, we will
-	    be in conformance with register conventions, and can return to
-	    the caller with a clear conscience.
-
-	procedure strcat
-
-	dest_addr = strcat (dest_addr, src_addr)
-
-	Appends the string pointed to by src_addr to the string pointed
-	to by dest_addr.  The first character of the source string is
-	copied to the location initially occupied by the trailing null
-	byte of the destination string.  Thereafter, characters are copied
-	from the source to the destination up thru the null byte that
-	trails the source string.
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g6
-#define LSW g7
-#else
-#define LSW g6
-#define MSW g7
-#endif
-
-	.globl	_strcpy, _strcat
-	.globl	__strcpy, __strcat
-	.leafproc	_strcpy, __strcpy
-	.leafproc	_strcat, __strcat
-	.align	2
-_strcat:
-#ifndef __PIC
-	lda	Lrett,g14
-#else
-	lda	Lrett-(.+8)(ip),g14
-#endif
-__strcat:
-	notand	g0,3,g4		# extract word addr of start of dest
-	lda	(g14),g13	# preserve return address
-	and	g0,3,LSW	# extract byte offset of dest
-	ld	(g4),MSW	# fetch word containing at least first byte
-	shlo	3,LSW,g14	# get shift count for making mask for first word
-	subi	1,0,LSW		# mask initially all ones
-#if __i960_BIG_ENDIAN__
-	shro	g14,LSW,LSW	# get mask for bytes needed from first word
-	lda	0xff000000,g5	# byte extraction mask
-#else
-	shlo	g14,LSW,LSW	# get mask for bytes needed from first word
-	lda	0xff,g5		# byte extraction mask
-#endif
-	notor	MSW,LSW,MSW	# set unneeded bytes to all ones
-Lsearch_for_word_with_null:
-	scanbyte 0,MSW		# check for null byte
-	lda	4(g4),g4	# post-increment dest word pointer
-	mov	MSW,LSW		# keep a copy of current word
-	ld	(g4),MSW	# fetch next word of dest
-	bno.t	Lsearch_for_word_with_null	# branch if null not found yet
-	and	g5,LSW,g14	# extract byte
-	cmpo	0,g14		# branch if null is first byte of word
-	subo	4,g4,g4		# move dest word ptr back to word with null
-	notand	g1,3,g3		# extract word addr of start of src
-	lda	(g4),g2		# set dest byte ptr to 1st byte of word w/ null
-	be.f	Lcase_14
-Lsearch_for_null:
-#if __i960_BIG_ENDIAN__
-	shro	8,g5,g5		# move mask down to next byte
-#else
-	shlo	8,g5,g5		# move mask up to next byte
-#endif
-	lda	1(g2),g2	# move dest byte ptr to next byte
-	and	g5,LSW,g14	# extract byte
-	cmpobne.t 0,g14,Lsearch_for_null	# branch if null is not yet found
-	lda	0xff,g5		# byte extraction mask
-	b	Lcase_235.a
-
-	
-_strcpy:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strcpy:
-	notand	g0,3,g4		# extract word addr of start of dest
-	lda	(g14),g13	# preserve return address
-	cmpo	g0,g4		# check alignment of dest
-	lda	0xff,g5		# load mask for byte extraction
-	notand	g1,3,g3		# extract word addr of start of src
-	bne.f	Lcase_235	# branch if dest is NOT word aligned
-
-Lcase_14:
-	cmpo	g3,g1		# check alignment of src
-	ld	(g3),LSW	# fetch word containing at least first byte
-	shlo	3,g1,g1		# compute shift count
-	lda	4(g3),g3	# advance src word addr
-#if __i960_BIG_ENDIAN__
-	lda	0xff,g5		# byte extraction mask
-#endif
-	bne.f	Lcase_4		# branch if src is NOT word aligned
-
-Lcase_1:				# src and dest are word aligned
-	subo	4,g4,g4		# store is pre-incrementing;  back up dest addr
-Lcase_1_wloop:			# word copying loop
-	scanbyte 0,LSW		# check for null byte in src word
-	lda	(LSW),g2	# keep a copy of the src word
-	addo	4,g4,g4		# pre-increment dest addr
-	ld	(g3),LSW	# pre-fetch next word of src
-	addo	4,g3,g3		# post-increment src addr
-	bo.f	Lcase_1_cloop	# branch if word contains null byte
-	st	g2,(g4)		# store word in dest string
-	b	Lcase_1_wloop
-
-Lcase_3_cloop:
-Lcase_1_cloop:			# character copying loop
-#if __i960_BIG_ENDIAN__
-	rotate	8,g2,g2		# move next byte into position for extraction
-	and	g5,g2,g14	# extract next char
-#else
-	and	g5,g2,g14	# extract next char
-	shro	8,g2,g2		# move next byte into position for extraction
-#endif
-	cmpo	0,g14		# check for null byte
-	stob	g14,(g4)	# store the byte in dest
-	lda	1(g4),g4	# post-increment dest byte addr
-	bne.t	Lcase_1_cloop	# branch if null not reached
-
-Lexit_code:
-	bx	(g13)		# g0 = addr of dest;  g14 = 0
-Lrett:
-	ret
-
-Lcase_3:				# src is word aligned; dest is not
-	addo	4,g4,g4		# move dest word ptr to first word boundary
-	mov	LSW,MSW		# make copy of first word of src
-	lda	0,g1		# initialize shift count to zero
-
-Lcase_25:
-Lcase_3_cloop_at_start:		# character copying loop for start of dest str
-#if __i960_BIG_ENDIAN__
-	rotate	8,MSW,MSW	# move next byte into position for extraction
-	and	g5,MSW,g14	# extract next char
-#else
-	and	g5,MSW,g14	# extract next char
-	shro	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	cmpo	0,g14		# check for null byte
-	stob	g14,(g2)	# store the byte in dest
-	lda	1(g2),g2	# post-increment dest ptr
-	be.f	Lexit_code	# branch if null byte reached
-	cmpo	g2,g4		# have we reached word boundary in dest?
-	lda	8(g1),g1	# augment the shift counter
-	bne.t	Lcase_3_cloop_at_start
-
-Lcase_4:
-	ld	(g3),MSW	# fetch msw of operand for double shift
-#if __i960_BIG_ENDIAN__
-	subo	g1,0,g1		# Adjust shift count for big endian.
-#endif
-
-Lcase_3_wloop:
-	eshro	g1,g6,g2	# extract 4 bytes of src
-	lda	4(g3),g3	# post-increment src word addr
-	scanbyte 0,g2		# check for null byte
-	lda	(MSW),LSW	# move msw to lsw
-	ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	bo.f	Lcase_3_cloop	# branch if word contains null byte
-	st	g2,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	b	Lcase_3_wloop
-
-Lcase_235:
-	lda	(g0),g2		# copy dest ptr 
-Lcase_235.a:
-	cmpo	g3,g1		# check alignment of src
-	ld	(g3),LSW	# fetch word containing at least first byte
-	and	3,g1,g14	# compute shift count
-	lda	4(g3),g3	# advance src word addr
-	shlo	3,g14,g1	
-	be.t	Lcase_3		# branch if dest is word aligned
-	or	g4,g14,g14	# is src earlier in word, later, or sync w/ dst
-	ld	(g3),MSW	# pre-fetch second half
-        cmpo    g2,g14		# < indicates first word of dest has more bytes
-	lda	4(g4),g4	# move dest word addr to first word boundary
-				/* than first word of source. */
-#if __i960_BIG_ENDIAN__
-	subo	g1,0,g14	# Adjust shift count for big endian.
-	eshro	g14,g6,g14	# extract four bytes
-	bge.f	1f
-#else
-	eshro	g1,g6,g14	# extract four bytes
-	bg.f	1f
-#endif
-	mov	MSW,LSW
-	lda	4(g3),g3	# move src word addr to second word boundary
-1:
-	mov	g14,MSW
-	b	Lcase_25
-
-/* end of strcpy */
-
diff --git a/newlib/libc/machine/i960/strcspn.S b/newlib/libc/machine/i960/strcspn.S
deleted file mode 100644
index cd7b2e694..000000000
--- a/newlib/libc/machine/i960/strcspn.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strcspn.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strcspn  (optimized assembler version: 80960K series, 80960CA)
-
-	len = strcspn (string, charset)
-
-	Return the number of characters in the maximum leading segment
-	of string which consists solely of characters NOT from charset.
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.
-*/
-
-	.globl	_strcspn
-	.globl	__strcspn
-	.leafproc	_strcspn, __strcspn
-	.align	2
-
-_strcspn:
-#ifndef __PIC
-	lda	Lrett,g14
-#else
-	lda	Lrett-(.+8)(ip),g14
-#endif
-__strcspn:
-	mov	g14,g13		# save return address
-	 lda	(g0),g3		# copy string pointer
-	mov	0,g14		# conform to register conventions
-
-Lnext_char:
-	ldob	(g3),g7		# fetch next character of string
-	addo	1,g1,g2		# g2 will be the charset ptr
-	ldob	(g1),g6		# fetch first character of charset
-	cmpobe.f 0,g7,Lexit	# quit if at end of string
-Lscan_set:
-	cmpo	g6,g7		# is charset char same as string char?
-	ldob	(g2),g5		# fetch next charset char
-	addo	1,g2,g2		# bump charset ptr
-	be.f	Lexit
-	cmpo	g6,0		# is charset exhausted?
-	lda	(g5),g6
-	bne.t	Lscan_set	# check next character of charset
-	addo	1,g3,g3		# check next character of string
-	b	Lnext_char
-
-Lexit:
-	subo	g0,g3,g0	# compute string length
-	bx	(g13)
-Lrett:	
-	ret
-
-/* end of strcspn */
diff --git a/newlib/libc/machine/i960/strdup.S b/newlib/libc/machine/i960/strdup.S
deleted file mode 100644
index 7e879ff0f..000000000
--- a/newlib/libc/machine/i960/strdup.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strdup.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strdup  (optimized assembler version: 80960K series, 80960CA)
-
-	dest_addr = strdup (src_addr)
-
-	Allocate memory and copy thereto the string pointed to by src_addr.
-	Return the address of the copy, or null if unable to perform the
-	operation.
-*/
-
-	.text
-	.align	2
-	.globl	_strdup
-_strdup:
-	mov	g0,r3		# Keep a copy of the original string addr
-	callj	_strlen		# Determine how much to allocate
-	addo	1,g0,g0		# Add one byte for the null byte at end
-	callj	_malloc		# Allocate the storage
-	cmpo	0,g0
-	mov	r3,g1		# Original string addr is now src for copy
-	bne.t	_strcpy		# Jump if allocation was successful
-	ret			# Return the null ptr otherwise
-
-/* end of strdup */
diff --git a/newlib/libc/machine/i960/strlen.S b/newlib/libc/machine/i960/strlen.S
deleted file mode 100644
index dfbeec29d..000000000
--- a/newlib/libc/machine/i960/strlen.S
+++ /dev/null
@@ -1,117 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strlen.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strlen  (optimized assembler version for the 80960K series)
-
-	src_addr = strlen (src_addr)
-
-	return the number of bytes that precede the null byte in the
-	string pointed to by src_addr.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last four words of the program's
-	allocated memory space.  This is so because strlen fetches ahead 
-	several words.  Disallowing the fetch ahead would impose a severe 
-	performance penalty.
-
-	Strategy:
-
-	Fetch the source array by long-words and scanbyte the words for the 
-	null byte until found.  Examine the word in which the null byte is
-	found, to determine its actual position, and return the length.
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble that would be necessary to assure alignment.  This 
-	is supported by the intuition that many source strings will be word 
-	aligned to begin with.
-*/
-
-	.globl	_strlen
-	.globl	__strlen
-	.leafproc	_strlen, __strlen
-	.align	2
-_strlen:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strlen:
-
-	mov	g14,g13		# preserve return address
-	ldl	(g0),g4		# fetch first two words
-	addo	8,g0,g2		# post-increment src word pointer
-	lda	0xff,g3		# byte extraction mask
-	
-
-Lsearch_for_word_with_null_byte:
-	scanbyte 0,g4		# check for null byte
-	mov	g5,g7		# copy second word
-	bo.f	Lsearch_for_null	# branch if null found 
-	scanbyte 0,g7		# check for null byte
-	ldl	(g2),g4		# fetch next pair of word of src
-	addo	8,g2,g2		# post-increment src word pointer
-	bno	Lsearch_for_word_with_null_byte	# branch if null not found yet
-
-	subo	4,g2,g2		# back up the byte pointer
-	mov	g7,g4		# move word with null to search word
-Lsearch_for_null:
-	subo	9,g2,g2		# back up the byte pointer
-Lsearch_for_null.a:
-	and	g4,g3,g14	# extract byte
-	cmpo	0,g14		# is it null?
-	addo	1,g2,g2		# bump src byte ptr
-	shro	8,g4,g4		# shift word to position next byte
-	bne	Lsearch_for_null.a
-
-Lexit_code:
-	subo	g0,g2,g0	# calculate string length
-	bx	(g13)		# g0 = addr of src;  g14 = 0
-Lrett:
-	ret
-
-/* end of strlen */
diff --git a/newlib/libc/machine/i960/strlen_ca.S b/newlib/libc/machine/i960/strlen_ca.S
deleted file mode 100644
index 350423bf0..000000000
--- a/newlib/libc/machine/i960/strlen_ca.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strle_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strlen  (optimized assembler version for the CA)
-
-	src_addr = strlen (src_addr)
-
-	return the number of bytes that precede the null byte in the
-	string pointed to by src_addr.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last four words of the program's
-	allocated memory space.  This is so because, in several cases, strlen
-	will fetch ahead several words.  Disallowing the fetch ahead would 
-	impose a severe performance penalty.
-
-	This program handles two cases:
-
-	1) the argument starts on a word boundary
-	2) the argument doesn't start on a word boundary
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  original src ptr;  upon return it is the byte count.
-	g1
-	g2  src ptr  
-	g3  mask
-	g4  even word of the source string
-	g5  odd word of the source string
-	g6  copy of even word, shift count
-	g7  copy of odd word
-	g13 return address
-	g14 byte extracted.
-*/
-
-	.globl	_strlen
-	.globl	__strlen
-	.leafproc	_strlen, __strlen
-	.align	2
-_strlen:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strlen:
-
-	notand	g0,3,g2		# extract word addr of start of src
-	lda	(g14),g13	# preserve return address
-	and	g0,3,g7		# extract byte offset of src
-	ld	(g2),g5		# fetch word containing at least first byte
-	shlo	3,g7,g7		# get shift count for making mask for first word
-	lda	4(g2),g2	# post-increment src word pointer
-	subi	1,0,g3		# mask initially all ones
-	chkbit	2,g2		# are we on an even word boundary or an odd one?
-#if __i960_BIG_ENDIAN__
-	shro	g7,g3,g3	# get mask for bytes needed from first word
-	notor	g5,g3,g7	# set unneeded bytes to all ones
-	lda	0xff000000,g3	# byte extraction mask
-#else
-	shlo	g7,g3,g3	# get mask for bytes needed from first word
-	notor	g5,g3,g7	# set unneeded bytes to all ones
-	lda	0xff,g3		# byte extraction mask
-#endif
-	bno.f	Lodd_word	# branch if first word is odd
-	mov	g7,g4		# move first word to copy thereof
-	ld	(g2),g5		# load odd word
-	lda	4(g2),g2	# post-increment src word pointer
-	
-
-Leven_word:
-	scanbyte 0,g4		# check for null byte
-	movl	g4,g6		# copy both words
-Lodd_word:			# trickery!  if we branch here, following branch
-				/* instruction will fall thru, as we want,  */
-				/* effecting the load of g4 and g5 only. */
-	ldl	(g2),g4		# fetch next pair of word of src
-	bo.f	Lsearch_for_null	# branch if null found 
-	scanbyte 0,g7		# check for null byte
-	lda	8(g2),g2	# post-increment src word pointer
-	bno.t	Leven_word	# branch if null not found yet
-
-	subo	4,g2,g2		# back up the byte pointer
-	lda	(g7),g6		# move odd word to search word
-Lsearch_for_null:
-	subo	9,g2,g2		# back up the byte pointer
-Lsearch_for_null.a:
-	and	g6,g3,g14	# extract byte
-	cmpo	0,g14		# is it null?
-	lda	1(g2),g2	# bump src byte ptr
-#if __i960_BIG_ENDIAN__
-	shlo	8,g6,g6		# shift word to position next byte
-#else
-	shro	8,g6,g6		# shift word to position next byte
-#endif
-	bne.t	Lsearch_for_null.a
-
-Lexit_code:
-	subo	g0,g2,g0	# calculate string length
-	bx	(g13)		# g0 = addr of src;  g14 = 0
-Lrett:
-	ret
-
-/* end of strlen */
diff --git a/newlib/libc/machine/i960/strncat.S b/newlib/libc/machine/i960/strncat.S
deleted file mode 100644
index a655824ea..000000000
--- a/newlib/libc/machine/i960/strncat.S
+++ /dev/null
@@ -1,155 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strncat.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure strncat  (optimized assembler version for the 80960K Series)
-
-	dest_addr = strncat (dest_addr, src_addr, max_bytes)
-
-	append the null terminated string pointed to by src_addr to the null 
-	terminated string pointed to by dest_addr.  Return the original
-	dest_addr.  If the source string is longer than max_bytes, then 
-	append only max_bytes bytes, and tack on a null byte on the end.
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last two words of the 
-	program's allocated memory space.  This is so because strncat fetches
-	ahead.  Disallowing the fetch ahead would impose a severe performance 
-	penalty.
-
-	Strategy:
-
-	First, skip to the null byte in the destination string.  Then
-	fetch the source string by words and store them by words to the
-	destination string, until there are fewer than three bytes left
-	to copy.  Then, using the last word of the source (the one that
-	contains the remaining 0, 1, 2, or 3 bytes to be copied), store
-	a byte at a time until Ldone.  
-
-	If, before exhausting the max_byte count, the null byte is encountered
-	in the source string, then just copy up thru the null byte.
-
-	Tactics:
-
-	1) Do NOT try to fetch and store the words in a word aligned manner 
-	because, in my judgement, the performance degradation experienced due 
-	to non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  
-*/
-
-	.globl _strncat
-	.globl __strncat
-	.leafproc _strncat,__strncat
-	.align    2
-_strncat:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__strncat:
-	mov	g14,g6
-	cmpibge	0, g2, Lno_operation	# Lexit early if max_bytes <= 0
-	mov	g0, g5
-Lskip_word_loop:
-	ld	(g5), g7	# fetch word of dest string
-	addo	4, g5, g5	# post-increment dest ptr
-	scanbyte 0, g7		# does it contain null byte?
-	bno	Lskip_word_loop	# if not, loop
-	subo	5, g5, g5	# adjust dest ptr 
-	lda	0xff, g3	# byte extraction mask = 0xff;
-Lskip_byte_loop:
-	and	g7, g3, g14	# extract byte of last word of dest string
-	cmpo	0, g14		# is it null?
-	addo	1, g5, g5	# adjust dest ptr
-	shro	8, g7, g7	# position next byte for extraction
-	bne	Lskip_byte_loop	# loop if null not found yet
-
-	ld	(g1), g7	# fetch first word of source string
-Lwloop:				# word copying loop
-	cmpo	4, g2		# max_bytes < 4 ?
-	addo	4, g1, g1	# post-increment source ptr
-	bge	Lcloop.a		# branch if less than 4 bytes to move
-	scanbyte 0, g7		# is null byte reached yet?
-	mov	g7, g4		# keep a copy of the source word
-	be	Lcloop		# branch if null byte reached
-	ld	(g1), g7	# pre-fetch next word of source
-	subo	4, g2, g2	# reduce max_byte counter
-	st	g4, (g5)	# store current word
-	addo	4, g5, g5	# post-increment destination ptr
-	b	Lwloop
-
-Lcloop.b:
-	addo	1, g5, g5	# post-increment destination ptr
-	shro	8, g7, g7	# position next byte for extraction
-Lcloop:				# character copying loop  (max_byte > 3)
-	and	g3, g7, g4	# extract character
-	cmpo	0, g4 		# is it null?
-	stob	g4, (g5)	# store it
-	bne	Lcloop.b		# loop if null not encountered yet
-
-	bx	(g6)		# g0 = dest string address; g14 = 0
-Lrett:	
-	ret
-
-Lcloop.c:
-	addo	1, g5, g5	# post-increment destination ptr
-	shro	8, g7, g7	# position next byte for extraction
-Lcloop.a:			# character copying loop  (max_byte <= 3)
-	cmpdeco	0,g2,g2		# max_byte == 0?
-	and	g3, g7, g4	# extract character
-	be	Ldone		# store null and Lexit if max_byte exhausted
-	cmpo	0, g4 		# is it null?
-	stob	g4, (g5)	# store it
-	bne	Lcloop.c		# loop if null not encountered yet
-
-Ldone:	stob	g14, (g5)	# store trailing null
-	bx	(g6)		# g0 = dest string address; g14 = 0
-
-Lno_operation: mov 0, g14	# conform to register conventions
-	bx	(g6)
-
-/* end of strncat */
diff --git a/newlib/libc/machine/i960/strncat_ca.S b/newlib/libc/machine/i960/strncat_ca.S
deleted file mode 100644
index 45c5e171e..000000000
--- a/newlib/libc/machine/i960/strncat_ca.S
+++ /dev/null
@@ -1,300 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "sncat_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strncat  (optimized assembler version for the CA)
-
-	dest_addr = strncat (dest_addr, src_addr, max_bytes)
-
-	append the null terminated string pointed to by src_addr to the null 
-	terminated string pointed to by dest_addr.  Return the original
-	dest_addr.  If the source string is longer than max_bytes, then 
-	append only max_bytes bytes, and tack on a null byte on the end
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, strncat
-	will fetch ahead one word.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source is word aligned, destination is not
-	4) destination is word aligned, source is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  original dest ptr;  not modified, so that it may be returned.
-	g1  src ptr;  shift count
-	g2  max_bytes
-	g3  src ptr (word aligned)
-	g4  dest ptr (word aligned)
-	g5  0xff  --  byte extraction mask
-	Little endian:
-		g6  lsw of double word for extraction of 4 bytes
-		g7  msw of double word for extraction of 4 bytes
-	Big endian:
-		g6  msw of double word for extraction of 4 bytes
-		g7  lsw of double word for extraction of 4 bytes
-	g13 return address
-	g14 byte extracted.
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g6
-#define LSW g7
-#else
-#define LSW g6
-#define MSW g7
-#endif
-
-	.globl	_strncat
-	.globl	__strncat
-	.leafproc	_strncat, __strncat
-	.align	2
-_strncat:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strncat:
-	notand	g0,3,g4		# extract word addr of start of dest
-	 lda	(g14),g13	# preserve return address
-	cmpibge.f 0,g2,Lexit_code # Lexit if number of bytes to move is <= zero.
-	and	g0,3,LSW	# extract byte offset of dest
-	 ld	(g4),MSW	# fetch word containing at least first byte
-	shlo	3,LSW,g14	# get shift count for making mask for first word
-	subi	1,0,LSW		# mask initially all ones
-#if __i960_BIG_ENDIAN__
-	shro	g14,LSW,LSW	# get mask for bytes needed from first word
-#else
-	shlo	g14,LSW,LSW	# get mask for bytes needed from first word
-#endif
-	notor	MSW,LSW,MSW	# set unneeded bytes to all ones
-	 lda	0xff,g5		# byte extraction mask
-Lsearch_for_word_with_null:
-	scanbyte 0,MSW		# check for null byte
-	 lda	4(g4),g4	# post-increment dest word pointer
-	mov	MSW,LSW		# keep a copy of current word
-	 ld	(g4),MSW	# fetch next word of dest
-	 bno.t	Lsearch_for_word_with_null	# branch if null not found yet
-#if __i960_BIG_ENDIAN__
-	shro	24,LSW,g14	# extract byte
-#else
-	and	g5,LSW,g14	# extract byte
-#endif
-	cmpo	0,g14		# branch if null is first byte of word
-	subo	4,g4,g4		# move dest word ptr to word with null
-	notand	g1,3,g3		# extract word addr of start of src
-	 bne.t	Lsearch_for_null
-
-Lcase_14:
-	cmpo	g1,g3		# check alignment of source
-	 ld	(g3),LSW	# fetch first word of source
-	shlo	3,g1,g14	# compute shift count
-	 lda	4(g3),g3	# post-increment src addr
-	 bne.f	Lcase_4		# branch if source is unaligned
-Lcase_1:
-Lcase_1_wloop:			# word copying loop
-	cmpi	g2,4		# check for fewer than four bytes to move
-	 lda	(LSW),g1	# keep a copy of the src word
-	 bl.f	Lcase_1_cloop	# branch if fewer than four bytes to copy
-	scanbyte 0,g1		# check for null byte in src word
-	 ld	(g3),LSW	# pre-fetch next word of src
-	addo	4,g3,g3		# post-increment src addr
-	 bo.f	Lcase_1_cloop	# branch if word contains null byte
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g4)		# store word in dest string
-	addo	4,g4,g4		# post-increment dest addr
-	 b	Lcase_1_wloop
-
-Lcase_3_cloop:
-Lcase_1_cloop:			# character copying loop (max_bytes <= 3)
-	cmpdeci	0,g2,g2		# is max_bytes exhausted?
-#if __i960_BIG_ENDIAN__
-	rotate	8,g1,g1		# move next byte into position for extraction
-#endif
-	and	g5,g1,g14	# extract next char
-	be.f	Lstore_null	# if max_bytes is exhausted, store null and quit
-	cmpo	0,g14		# check for null byte
-	 stob	g14,(g4)	# store the byte in dest
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# move next byte into position for extraction
-#endif
-	 lda	1(g4),g4	# post-increment dest byte addr
-	 bne.t	Lcase_1_cloop	# branch if null not reached
-	bx	(g13)		# Lexit (g14 == 0)
-
-Lstore_null:
-	mov	0,g14		# store null, and set g14 to zero
-	stob	g14,(g4)
-	bx	(g13)
-
-
-Lsearch_for_null:
-#if __i960_BIG_ENDIAN__
-	shlo	8,LSW,LSW	# check next byte
-	shro	24,LSW,g14
-#else
-	shlo	8,g5,g5		# move mask up to next byte
-	and	g5,LSW,g14	# extract byte
-#endif
-	 lda	1(g4),g4	# move dest byte ptr to next byte
-	cmpobne.t 0,g14,Lsearch_for_null	# branch if null is not yet found
-
-Lcase_235:
-	cmpo	g1,g3		# check alignment of src
-	 ld	(g3),LSW	# pre-fetch word with start of src
-	and	3,g1,g1		# compute shift count
-	 lda	0xff,g5		# load mask for byte extraction
-	shlo	3,g1,g14	
-	 lda	4(g3),g3	# post-increment src word counter
-	 be.t	Lcase_3		# branch if src is word aligned
-	and	g4,3,MSW	# extract byte offset for dest string
-	cmpo    MSW,g1		# < indicates first word of dest has more bytes
-				/* than first word of source. */
-	 ld	(g3),MSW	# fetch second word of src
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian
-#endif
-	eshro	g14,g6,g5	# extract four bytes
-#if __i960_BIG_ENDIAN__
-	 bge.f	1f
-#else
-	 bg.f	1f
-#endif
-	mov	MSW,LSW
-	 lda	4(g3),g3	# move src word addr to second word boundary
-1:
-	mov	g5,MSW
-	 lda	0xff,g5
-	 b	Lcase_25
-
-Lcase_3:				# src is word aligned; dest is not
-	mov	LSW,MSW		# make copy of first word of src
-	 lda	32,g14		# initialize shift count to zero (mod 32)
-Lcase_25:
-
-Lcase_3_cloop_at_start:		# character copying loop for start of dest str
-	cmpdeci	0,g2,g2		# is max_bytes exhausted?
-#if __i960_BIG_ENDIAN__
-	shro	24,MSW,g5	# extract next char
-#else
-	and	g5,MSW,g5	# extract next char
-#endif
-	 be.f	Lstore_null	# Lexit if max_bytes is exhausted
-	cmpo	0,g5		# check for null byte
-	 stob	g5,(g4)		# store the byte in dest
-	addo	1,g4,g4		# post-increment dest ptr
-	 lda	0xff,g5		# re-initialize byte extraction mask
-	notand	g4,3,g1		# extract word address
-	 be.t	Lexit_code	# Lexit if null byte reached
-	cmpo	g1,g4		# have we reached word boundary in dest yet?
-#if __i960_BIG_ENDIAN__
-	 lda	-8(g14),g14	# augment the shift counter
-	rotate	8,MSW,MSW	# move next byte into position for extraction
-#else
-	 lda	8(g14),g14	# augment the shift counter
-	shro	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	 bne.t	Lcase_3_cloop_at_start	# branch if reached word boundary?
-
-#if __i960_BIG_ENDIAN__
-	cmpo	0,g14
-	 ld	(g3),MSW	# fetch msw of operand for double shift
-	bne	Lcase_3_wloop	# branch if src is still unaligned.
-
-Lcase_3_wloop2:
-	cmpi	g2,4		# less than four bytes to move?
-	mov	LSW,g1		# extract 4 bytes of src
-	 lda	4(g3),g3	# post-increment src word addr
-	 bl.f	Lcase_3_cloop	# branch if < four bytes left to move
-	scanbyte 0,g1		# check for null byte
-	mov	MSW,LSW		# move msw to lsw
-	 ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	 bo.f	Lcase_3_cloop	# branch if word contains null byte
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	 b	Lcase_3_wloop2
-Lcase_4:
-	subo	g14,0,g14	# adjust shift count for big endian
-#else
-Lcase_4:
-#endif
-
-	ld	(g3),MSW	# fetch msw of operand for double shift
-
-Lcase_3_wloop:
-	cmpi	g2,4		# less than four bytes to move?
-	eshro	g14,g6,g1	# extract 4 bytes of src
-	 lda	4(g3),g3	# post-increment src word addr
-	 bl.f	Lcase_3_cloop	# branch if < four bytes left to move
-	scanbyte 0,g1		# check for null byte
-	mov	MSW,LSW		# move msw to lsw
-	 ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	 bo.f	Lcase_3_cloop	# branch if word contains null byte
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 st	g1,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	 b	Lcase_3_wloop
-
-
-Lexit_code:
-	mov	0,g14		# conform to register conventions
-	bx	(g13)		# g0 = addr of dest;  g14 = 0
-Lrett:
-	ret
-
-/* end of strncat */
-
diff --git a/newlib/libc/machine/i960/strncmp.S b/newlib/libc/machine/i960/strncmp.S
deleted file mode 100644
index 030b75084..000000000
--- a/newlib/libc/machine/i960/strncmp.S
+++ /dev/null
@@ -1,129 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strncmp.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure strncmp  (optimized assembler version for the 80960K Series)
-
-	result = strncmp (src1_addr, src2_addr, max_bytes)
-
-	compare the null terminated string pointed to by src1_addr to 
-	the string pointed to by src2_addr.  Return 0 iff the strings
-	are equal, -1 if src1_addr is lexicographically less than src2_addr, 
-	and 1 if it is lexicographically greater.  Do not compare more than 
-	max_bytes bytes.
-
-	Undefined behavior will occur if the end of either source string
-	(i.e. the terminating null byte) is in the last two words of the 
-	program's allocated memory space.  This is so because strncmp
-	will fetch ahead.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	Strategy:
-
-	Fetch and compare the strings by words and go to a character
-	comparison loop as soon as a pair of words differ.  If the
-	words are equal up through either the exhaustion of max_bytes
-	or the presence of the null byte, return 0 (equality).  Otherwise,
-	the character comparator will return -1 or 1 for inequality, or
-	0 if the differing byte is after the null byte or after the
-	exhaustion of max_bytes.
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  
-*/
-
-	.globl _strncmp
-	.globl __strncmp
-	.leafproc _strncmp,__strncmp
-	.align 2
-
-_strncmp:
-#ifndef __PIC
-	lda	.Lrett,g14
-#else
-	lda	.Lrett-(.+8)(ip),g14
-#endif
-__strncmp:
-	mov	g14,g13
-	ldconst 0,g14
-	cmpibge	0,g2,Lequal_exit		# Lexit early if max_bytes <= 0
-	addo	g2,g0,g2
-.Lwloop:
-	cmpo	g0,g2		# are max_bytes exhausted?
-	ld	(g0), g5	# fetch word of source_1
-	bge	 Lequal_exit	# Lexit (equality) if max_bytes exhausted
-	ld	(g1), g3	# fetch word of source_2
-	addo     4,g0,g0	# post-increment source_1 ptr
-	scanbyte 0,g5		# is a null byte present?
-	addo     4,g1,g1	# post-increment source_1 ptr
-	be 	.Lcloop.a	# perform char comparator if null byte found
-	cmpobe	 g5,g3,.Lwloop	# perform char comparator if words are unequal
-
-.Lcloop.a: subo	4,g0,g0		# adjust max_byte counter
-	ldconst 0xff,g4		# byte extraction mask
-
-.Lcloop: and	g4,g5,g7  	# compare individual bytes
-	and	g4,g3,g6
-	cmpobne	g7,g6,.diff	# if different, return -1 or 1
-	cmpo    0,g6		# they are equal.  are they null?
-	shlo	8,g4,g4		# position mask to extract next byte
-	be	Lequal_exit	# if they are null, Lexit (equality)
-	addo	1,g0,g0		# is max_bytes exhausted?
-	cmpobl	g0,g2,.Lcloop	# if not, loop.  if so, Lexit (equality)
-
-Lequal_exit:
-	mov	0,g0
-	bx	(g13)
-.Lrett:	
-	ret
-.diff:	bl	.neg
-        mov     1,g0
-	bx	(g13)
-
-.neg:	subi    1,0,g0
-.Lexit: 	
-	bx	(g13)
-
-/* end of strncmp */
diff --git a/newlib/libc/machine/i960/strncmp_ca.S b/newlib/libc/machine/i960/strncmp_ca.S
deleted file mode 100644
index 0b1a8ff4b..000000000
--- a/newlib/libc/machine/i960/strncmp_ca.S
+++ /dev/null
@@ -1,253 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "sncmp_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strncmp  (optimized assembler version for the CA)
-
-	result = strncmp (src1_addr, src2_addr, max_bytes)
-
-	compare the null terminated string pointed to by src1_addr to 
-	the string space pointed to by src2_addr.  Return 0 iff the strings
-	are equal, -1 if src1_addr is lexicly less than src2_addr, and 1
-	if it is lexicly greater.  Do not compare more than max_bytes bytes.
-
-	Undefined behavior will occur if the end of either source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, strncmp
-	will fetch ahead one word.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source1 is word aligned, source2 is not
-	4) source2 is word aligned, source1 is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g14 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers are sufficient to implement the routine.
-	The registers are used as follows:
-
-	g0  original src1 ptr;  extracted word;  return result
-	g1  src2 ptr;  0xff  --  byte extraction mask
-	g2  maximum number of bytes to compare
-	g3  src2 word ptr 
-	Little endian:
-		g4  lsw of src1
-		g5  msw of src1
-		g6  src2 word
-		g7  src1 word ptr
-	Big endian:
-		g4  msw of src1
-		g5  lsw of src1
-		g6  src1 word ptr
-		g7  src2 word
-	g13 return address
-	g14 shift count
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g4
-#define LSW g5
-#define SRC1 g6
-#define SRC2 g7
-#else
-#define LSW g4
-#define MSW g5
-#define SRC2 g6
-#define SRC1 g7
-#endif
-
-	.globl	_strncmp
-	.globl	__strncmp
-	.leafproc	_strncmp, __strncmp
-	.align	2
-_strncmp:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strncmp:
-Lrestart:
-	notand	g0,3,SRC1	# extract word addr of start of src1
-	 lda	(g14),g13	# preserve return address
-	 cmpibge.f 0,g2,Lequal_exit	# return equality if number of bytes to
-					/* compare is none. */
-#if __i960_BIG_ENDIAN__
-	cmpo	g0,SRC1		# check alignment of src1
-#endif
-	 ld	(SRC1),LSW	# fetch word with at least first byte of src1
-	notand	g1,3,g3		# extract word addr of start of src2
-	 ld	4(SRC1),MSW	# fetch second word of src1
-#if __i960_BIG_ENDIAN__
-	 bne	Lsrc1_unaligned	# branch if src1 is unaligned
-	cmpo	g3,g1		# check alignment of src2
-	 ld	(g3),SRC2	# fetch word with at least first byte of src2
-	shlo	3,g0,g14	# compute shift count for src1
-	subo	g14,0,g14	# adjust shift count for big endian
-	 lda	8(SRC1),SRC1	# advance src1 word addr
-	 bne.f	Lsrc2_unaligned	# branch if src2 is NOT word aligned
-
-				/* src2 is word aligned */
-
-	mov	LSW,g0
-
-Lwloop2:				# word comparing loop
-	cmpo	SRC2,g0		# compare src1 and src2 words
-	 lda	0xff000000,g1	# byte extraction mask
-	mov	MSW,LSW		# move msw of src1 to lsw
-	 ld	(SRC1),MSW	# pre-fetch next msw of src1
-	addo	4,SRC1,SRC1	# post-increment src1 addr
-	 lda	4(g3),g3	# pre-increment src2 addr
-	 bne.f	Lcloop		# branch if src1 and src2 unequal
-	scanbyte 0,g0		# check for null byte in src1 word
-	 ld	(g3),SRC2	# pre-fetch next word of src2
-	mov	LSW,g0		# extract word of src1
-	 subi	4,g2,g2		# decrement maximum byte count
-	bo.f	Lequal_exit	# branch if null byte encountered
-	cmpibl.t 0,g2,Lwloop2	# branch if max_bytes not reached yet
-
-	b	Lequal_exit	# strings were equal up through max_bytes
-
-Lsrc1_unaligned:
-#endif
-	cmpo	g3,g1		# check alignment of src2
-	 ld	(g3),SRC2	# fetch word with at least first byte of src2
-	shlo	3,g0,g14	# compute shift count for src1
-#if __i960_BIG_ENDIAN__
-	subo	g14,0,g14	# adjust shift count for big endian
-#endif
-	eshro	g14,g4,LSW	# extract word of src1
-	 lda	8(SRC1),SRC1	# advance src1 word addr
-	 bne.f	Lsrc2_unaligned	# branch if src2 is NOT word aligned
-
-				/* at least src2 is word aligned */
-
-	mov	LSW,g0
-
-Lwloop:				# word comparing loop
-	cmpo	SRC2,g0		# compare src1 and src2 words
-#if __i960_BIG_ENDIAN__
-	 lda	0xff000000,g1	# byte extraction mask
-#else
-	 lda	0xff,g1		# byte extraction mask
-#endif
-	mov	MSW,LSW		# move msw of src1 to lsw
-	 ld	(SRC1),MSW	# pre-fetch next msw of src1
-	addo	4,SRC1,SRC1	# post-increment src1 addr
-	 lda	4(g3),g3	# pre-increment src2 addr
-	 bne.f	Lcloop		# branch if src1 and src2 unequal
-	scanbyte 0,g0		# check for null byte in src1 word
-	 ld	(g3),SRC2	# pre-fetch next word of src2
-	eshro	g14,g4,g0	# extract word of src1
-	 subi	4,g2,g2		# decrement maximum byte count
-	bo.f	Lequal_exit	# branch if null byte encountered
-	cmpibl.t 0,g2,Lwloop	# branch if max_bytes not reached yet
-
-	b	Lequal_exit	# strings were equal up through max_bytes
-
-Lcloop_setup:			# setup for coming from Lsrc2_unaligned
-	mov	LSW,g0		# restore extracted src1 word
-#if __i960_BIG_ENDIAN__
-	 lda	0xff000000,g1	# byte extraction mask
-#else
-	 lda	0xff,g1		# byte extraction mask
-#endif
-
-Lcloop:				# character comparing loop
-	and	SRC2,g1,g3	# extract next char of src2
-	and	g0,g1,LSW	# extract next char of src1
-	cmpobne.f LSW,g3,.diff	# check for equality
-	cmpo	0,LSW		# check for null byte
-#if __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# shift mask for next byte
-#else
-	shlo	8,g1,g1		# shift mask for next byte
-#endif
-	subi	1,g2,g2		# decrement character counter
-	 bne.t	Lcloop		# branch if null not reached
-
-				/* words are equal up thru null byte */
-
-Lequal_exit:
-	mov	0,g14		# conform to register conventions
-	 lda	0,g0		# return zero, indicating equality
-	bx	(g13)		# return
-
-Lrett:
-	ret
-
-.diff:
-	mov	0,g14
-	 bl	Lless_than_exit
-Lgreater_than_exit:
-	cmpibge.f 0,g2,Lequal_exit  # branch if difference is beyond max_bytes
-	mov	1,g0
-	 bx	(g13)		# g0 = 1 (src1 > src2)
-Lless_than_exit:
-	cmpibge.f 0,g2,Lequal_exit  # branch if difference is beyond max_bytes
-	subi	1,0,g0
-	 bx	(g13)		# g0 = -1 (src1 < src2)
-
-Lsrc2_unaligned:
-	notor	g1,3,g14	# first step in computing new src1 ptr
-	 ld	4(g3),SRC1	# fetch second word of src2
-	shlo	3,g1,MSW	# compute shift count for src2
-#if __i960_BIG_ENDIAN__
-	subo	MSW,0,MSW	# adjust shift count for big endian
-#endif
-	eshro	MSW,g6,SRC2	# extract word of src2
-	cmpo	LSW,SRC2	# compare src1 and src2 words
-	 lda	4(g3),g1	# set new src2 ptr
-	 bne.f	Lcloop_setup	# first four bytes differ
-	scanbyte 0,LSW		# check for null byte
-	subo	g14,g0,g0	# second (final) step in computing new src1 ptr
-	addi	g14,g2,g2	# compute new max_bytes too
-	 lda	(g13),g14	# prepare return pointer for Lrestart
-	 bno.t	Lrestart		# if null byte not encountered, continue 
-				/* with both string fetches shifted such that*/
-				/* src2 is now word aligned.*/
-	mov	0,g14		# conform to register conventions.
-	 lda	0,g0		# return indicator of equality.
-	bx	(g13)
diff --git a/newlib/libc/machine/i960/strncpy.S b/newlib/libc/machine/i960/strncpy.S
deleted file mode 100644
index 9f51b607c..000000000
--- a/newlib/libc/machine/i960/strncpy.S
+++ /dev/null
@@ -1,154 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strncpy.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-/*
-	procedure strncpy  (optimized assembler version for the 80960K Series)
-
-	dest_addr = strncpy (dest_addr, src_addr, max_bytes)
-
-	copy the null terminated string pointed to by src_addr to the 
-	string pointed to by dest_addr.  Return the original dest_addr.
-	If the source string is shorter than max_bytes, then null-pad 
-	the destination string.  If it is longer than max_bytes, the 
-	copy stops at max_bytes bytes (and no terminating null appears 
-	in the destination string).
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last two words of the 
-	program's allocated memory space.  This is so because strncpy fetches
-	ahead.  Disallowing the fetch ahead would impose a severe performance 
-	penalty.
-
-	Strategy:
-
-	Fetch and store the strings by words and go to a character move loop 
-	as soon as a null byte is encountered.  If max_bytes is exhausted
-	first, then terminate after moving only max_bytes (with the last
-	0, 1, 2, or 3 bytes moved as single bytes, not as a word).
-	Otherwise, the character move loop moves the last bytes or the
-	source string, and then null-pads the destination string until
-	max_bytes is exhausted.
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added
-	by the preamble and convoluted body that would be necessary to assure 
-	alignment.  
-
-	2) When the null byte is encountered in a source word, null out the
-	higher-numbered bytes in that word, store the word in the destination,
-	and go to the word null-padder, which may eventually go to the byte
-	null-padder.
-*/
-
-	.globl _strncpy
-	.globl __strncpy
-	.leafproc _strncpy,__strncpy
-	.align    2
-_strncpy:
-#ifndef __PIC
- 	lda	Lrett,g14
-#else
- 	lda	Lrett-(.+8)(ip),g14
-#endif
-__strncpy:	
-	mov	g14, g13
-	cmpibge	0,g2,Lexit	# quit early if max_bytes <= 0
-	ld	(g1), g7	# fetch the first word of the source
-	mov	g0, g5
-	lda	0xff, g3	# byte extraction mask
-	addo	g1, g2, g6
-	addo	g2, g5, g2
-Lwloop:				# word copying loop
-	addo	4, g1, g1	# post-increment source ptr
-	cmpo	g6, g1		# max_bytes < 4 ?
-	mov	g7, g4		# keep a copy of source word
-	bl	Lcloop.a		# if less than four bytes to go, go to char loop
-	scanbyte 0, g4		# null byte found?
-	ld	(g1), g7	# pre-fetch next word of the source
-	be	Lcloop.c		# go to char loop if null encountered
-	st	g4, (g5)	# store current word
-	addo	4, g5, g5	# post-increment destination ptr
-	b	Lwloop
-
-Lcloop.a:			# character copying loop (max_bytes < 3)
-	and	g3, g4, g14	# extract byte
-Lcloop.b:
-	cmpo	g2, g5		# max_bytes <= 0 ?
-	shro	8, g4, g4	# position word to extract next byte
-	be	Lexit		# exit if max_bytes exhausted
-	cmpo	0, g14 		# is it null?
-	stob	g14, (g5)	# store it
-	addo	1, g5, g5	# post-increment dest ptr
-	bne	Lcloop.a		# branch if we are NOT null padding
-	b	Lcloop.b		# branch if we are null padding
-
-Lexit:
-	mov	0, g14
-	bx	(g13)		# g0 = dest string address; g14 = 0
-Lrett:	
-	ret
-
-Lcloop.c:			# character copying loop
-	and	g3, g4, g14	# extract byte
-	cmpo	0, g14 		# is it null?
-	mov	g3, g7		# save mask
-	shlo	8, g3, g3	# shift mask to next byte position
-	bne	Lcloop.c		# loop until null found
-	subo	1, g7, g3	# mask to null pad after null byte
-	and	g3, g4, g4	# null-out stuff after null byte
-	st	g4, (g5)	# store last part of src and first of null-pad
-	subo	8,g2,g6		# adjust max_byte counter
-
-Lzwloop:
-	cmpo	g5, g6		# max_bytes < 4 ?
-	addo	4, g5, g5	
-	bg	Lcloop.b		# if so, goto character loop
-	st	g14, (g5)	# store four null bytes
-	b	Lzwloop
-
-/* end of strncpy */
diff --git a/newlib/libc/machine/i960/strncpy_ca.S b/newlib/libc/machine/i960/strncpy_ca.S
deleted file mode 100644
index 1f90acf1c..000000000
--- a/newlib/libc/machine/i960/strncpy_ca.S
+++ /dev/null
@@ -1,289 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "sncpy_ca.s"
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strncpy  (optimized assembler version for the CA)
-
-	dest_addr = strncpy (dest_addr, src_addr, max_bytes)
-
-	copy the null terminated string pointed to by src_addr to 
-	the string space pointed to by dest_addr.  Return the original
-	dest_addr.  If the source string is shorter than max_bytes,
-        then null-pad the destination string.
-
-	This routine will fail if the source and destination string
-	overlap (in particular, if the end of the source is overlapped
-	by the beginning of the destination).  The behavior is undefined.
-	This is acceptable according to the draft C standard.
-
-	Undefined behavior will also occur if the end of the source string
-	(i.e. the terminating null byte) is in the last word of the program's
-	allocated memory space.  This is so because, in several cases, strcpy
-	will fetch ahead one word.  Disallowing the fetch ahead would impose
-	a severe performance penalty.
-
-	This program handles five cases:
-
-	1) both arguments start on a word boundary
-	2) neither are word aligned, but they are offset by the same amount
-	3) source is word aligned, destination is not
-	4) destination is word aligned, source is not
-	5) neither is word aligned, and they are offset by differing amounts
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.  The registers are used as follows:
-
-	g0  original dest ptr;  not modified, so that it may be returned.
-	g1  src ptr;  shift count
-	g2  max_bytes
-	g3  src ptr (word aligned)
-	g4  dest ptr (word aligned)
-	g5  0xff  --  byte extraction mask
-	Little endian:
-		g6  lsw of double word for extraction of 4 bytes
-		g7  msw of double word for extraction of 4 bytes
-	Big endian:
-		g6  msw of double word for extraction of 4 bytes
-		g7  lsw of double word for extraction of 4 bytes
-	g13 return address
-	g14 byte extracted.
-*/
-
-#if __i960_BIG_ENDIAN__
-#define MSW g6
-#define LSW g7
-#else
-#define LSW g6
-#define MSW g7
-#endif
-
-	.globl	_strncpy
-	.globl	__strncpy
-	.leafproc	_strncpy, __strncpy
-	.align	2
-_strncpy:
-#ifndef __PIC
-	lda 	Lrett,g14
-#else
-	lda 	Lrett-(.+8)(ip),g14
-#endif
-__strncpy:
-	notand	g1,3,g3		# extract word addr of start of src
-	 lda	(g14),g13	# preserve return address
-	 cmpibge.f 0,g2,Lexit_code # Lexit if number of bytes to move is <= zero.
-	cmpo	g3,g1		# check alignment of src
-	 ld	(g3),LSW	# fetch word containing at least first byte
-	notand	g0,3,g4		# extract word addr of start of dest
-	 lda	4(g3),g3	# advance src word addr
-	 bne.f	Lcase_245	# branch if src is NOT word aligned
-
-Lcase_13:
-	cmpo	g0,g4		# check alignment of dest
-	 lda	0xff,g5		# load mask for byte extraction
-	subo	4,g4,g4		# store is pre-incrementing;  back up dest addr
-	 bne.f	Lcase_3		# branch if dest not word aligned
-
-Lcase_1:				# src and dest are word aligned
-Lcase_1_wloop:			# word copying loop
-	cmpi	g2,4		# check for fewer than four bytes to move
-	 lda	(LSW),g1	# keep a copy of the src word
-	addo	4,g4,g4		# pre-increment dest addr
-	 bl.f	Lcase_1_cloop.a	# branch if fewer than four bytes to copy
-	scanbyte 0,g1		# check for null byte in src word
-	 ld	(g3),LSW	# pre-fetch next word of src
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 bo.f	Lcase_1_cloop.c	# branch if word contains null byte
-	addo	4,g3,g3		# post-increment src addr
-	 st	g1,(g4)		# store word in dest string
-	 b	Lcase_1_wloop
-
-Lcase_3_cloop.a:
-Lcase_1_cloop.a:			# character copying loop (max_bytes <= 3)
-#if __i960_BIG_ENDIAN__
-	rotate	8,g1,g1		# move next byte into position for extraction
-#endif
-	and	g5,g1,g14	# extract next char
-Lcase_1_cloop.b:
-	cmpdeci	0,g2,g2		# is max_bytes exhausted?
-	be.f	Lexit_code	# Lexit if max_bytes is exhausted
-	cmpo	0,g14		# check for null byte
-	 stob	g14,(g4)	# store the byte in dest
-#if ! __i960_BIG_ENDIAN__
-	shro	8,g1,g1		# move next byte into position for extraction
-#endif
-	 lda	1(g4),g4	# post-increment dest byte addr
-	 bne.t	Lcase_1_cloop.a	# branch if null not reached
-	 b	Lcase_1_cloop.b
-
-Lexit_code:
-	mov	0,g14		# conform to register conventions
-	bx	(g13)		# g0 = addr of dest;  g14 = 0
-Lrett:
-	ret
-
-Lcase_1_cloop.c:
-Lcase_3_cloop.c:
-#if __i960_BIG_ENDIAN__
-	rotate	24,g5,g5	# move mask into position for testing next byte
-#endif
-	and	g5,g1,g14	# extract next char
-	cmpo	0,g14		# check for null byte
-#if ! __i960_BIG_ENDIAN__
-	 lda	(g5),LSW	# keep a copy of the current mask
-	shlo	8,g5,g5		# move mask into position for testing next byte
-#endif
-	 bne.t	Lcase_1_cloop.c	# branch if null not reached
-#if __i960_BIG_ENDIAN__
-	subo	1,g5,g5		# null pad.
-	andnot	g5,g1,g1	# last bytes to copy, and null pad rest of word
-#else
-	subo	1,LSW,g5	# mask to get last bytes to copy, and null pad
-	and	g5,g1,g1	# last bytes to copy, and null pad rest of word
-#endif
-	st	g1,(g4)	
-
-Lcase_1_zwloop:			# zero word loop
-	cmpi	g2,4		# check for fewer than four bytes to move
-	addo	4,g4,g4		# pre-increment dest addr
-	 bl.f	Lcase_1_cloop.b	# branch if fewer than four bytes to copy
-	subo	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 st	g14,(g4)	# store word in dest string
-	 b	Lcase_1_zwloop
-
-Lcase_3:				# src is word aligned; dest is not
-	addo	8,g4,g4		# move dest word ptr to first word boundary
-	 lda	(g0),g1		# copy dest byte ptr
-	mov	LSW,MSW		# make copy of first word of src
-	 lda	32,g14		# initialize shift count to zero (mod 32)
-
-Lcase_25:
-Lcase_3_cloop_at_start:		# character copying loop for start of dest str
-	cmpdeci	0,g2,g2		# is max_bytes exhausted?
-#if __i960_BIG_ENDIAN__
-	shro	24,MSW,g5	# extract next char
-#else
-	and	g5,MSW,g5	# extract next char
-#endif
-	 be.f	Lexit_code	# Lexit if max_bytes is exhausted
-	cmpo	0,g5		# check for null byte
-	 stob	g5,(g1)		# store the byte in dest
-	addo	1,g1,g1		# post-increment dest ptr
-	 lda	0xff,g5		# re-initialize byte extraction mask
-	 bne.t	1f		# drop thru if null byte reached (to pad)
-	movl	0,g6		# blank out remainder of input buffer
-1:
-	cmpo	g1,g4		# have we reached word boundary in dest yet?
-#if __i960_BIG_ENDIAN__
-	 lda	-8(g14),g14	# augment the shift counter
-	rotate	8,MSW,MSW	# move next byte into position for extraction
-#else
-	 lda	8(g14),g14	# augment the shift counter
-	shro	8,MSW,MSW	# move next byte into position for extraction
-#endif
-	 bne.t	Lcase_3_cloop_at_start	# branch if reached word boundary?
-
-	ld	(g3),MSW	# fetch msw of operand for double shift
-
-Lcase_4:
-
-#if __i960_BIG_ENDIAN__
-	cmpobne	0,g14,Lcase_3_wloop # branch if src is still unaligned.
-
-Lcase_3_wloop2:
-	cmpi	g2,4		# less than four bytes to move?
-	 lda	(LSW),g1	# extract 4 bytes of src
-	lda	4(g3),g3	# post-increment src word addr
-	 bl.f	Lcase_3_cloop.a	# branch if < four bytes left to move
-	scanbyte 0,g1		# check for null byte
-	 lda	(MSW),LSW	# move msw to lsw
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	 bo.f	Lcase_3_cloop.c	# branch if word contains null byte
-	st	g1,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	 b	Lcase_3_wloop2
-
-#endif
-
-Lcase_3_wloop:
-	cmpi	g2,4		# less than four bytes to move?
-	eshro	g14,g6,g1	# extract 4 bytes of src
-	 lda	4(g3),g3	# post-increment src word addr
-	 bl.f	Lcase_3_cloop.a	# branch if < four bytes left to move
-	scanbyte 0,g1		# check for null byte
-	 lda	(MSW),LSW	# move msw to lsw
-	subi	4,g2,g2		# decrease max_byte count by the 4 bytes moved
-	 ld	(g3),MSW	# pre-fetch msw of operand for double shift
-	 bo.f	Lcase_3_cloop.c	# branch if word contains null byte
-	st	g1,(g4)		# store 4 bytes to dest
-	addo	4,g4,g4		# post-increment dest ptr
-	 b	Lcase_3_wloop
-
-Lcase_245:
-	cmpo	g0,g4		# check alignment of dest
-	 ld	(g3),MSW	# pre-fetch second half
-	and	3,g1,g1		# compute shift count
-	 lda	0xff,g5		# load mask for byte extraction
-#if __i960_BIG_ENDIAN__
-	subo	g1,4,g14	# adjust shift count for big endian.
-	shlo	3,g14,g14	
-#else
-	shlo	3,g1,g14	
-#endif
-	 be.t	Lcase_4		# branch if dest is word aligned
-	or	g4,g1,g1	# is src earlier in word, later, or sync w/ dst
-	cmpo    g0,g1		# < indicates first word of dest has more bytes
-				/* than first word of source. */
-	 lda	4(g4),g4	# move dest word addr to first word boundary
-	eshro	g14,g6,g5	# extract four bytes
-	 lda	(g0),g1
-	 bg.f	1f
-	mov	MSW,LSW
-	 lda	4(g3),g3	# move src word addr to second word boundary
-1:
-	mov	g5,MSW
-	 lda	0xff,g5
-	 b	Lcase_25
-
-/* end of strncpy */
-
diff --git a/newlib/libc/machine/i960/strpbrk.S b/newlib/libc/machine/i960/strpbrk.S
deleted file mode 100644
index bae909f20..000000000
--- a/newlib/libc/machine/i960/strpbrk.S
+++ /dev/null
@@ -1,100 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-/*
- * (c) copyright 1989,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strpbrk  (optimized assembler version: 80960K series, 80960CA)
-
-	char_addr = strpbrk (string, brkset_string)
-
-	Return the address of the first character in string that is NOT
-	in the brkset_string.  Return NULL if none exists.
-
-	At the time of this writing, only g0 thru g7 and g13 are available 
-	for use in this leafproc;  other registers would have to be saved and
-	restored.  These nine registers, plus tricky use of g14 are sufficient
-	to implement the routine.
-
-	This routine stays out of g3 and g4 altogether.  They may be used by 
-	the strtok routine, which calls this routine in an incestuous way.
-*/
-#ifdef  __PIC
-        .pic
-#endif
-#ifdef  __PID
-        .pid
-#endif
-
-	.file "strprk.s"
-	.globl	_strpbrk
-	.globl	__strpbrk
-	.leafproc	_strpbrk, __strpbrk
-	.align	2
-
-_strpbrk:
-#ifdef __PIC
-	lda	Lrett-(.+8)(ip),g14
-	b	__strpbrk
-#else
-	lda	Lrett,g14
-	b	__strpbrk
-#endif
-
-Lrett:	ret
-
-__strpbrk:
-
-Lnext_char_strpbrk:
-	addo	1,g1,g2		# g2 will be the brkset ptr
-	ldob	(g0),g7		# fetch next character of string
-	ldob	(g1),g6		# fetch first character of brkset
-	cmpobe.f 0,g7,Lexit_char_not_found	# quit if at end of string
-Lscan_set_strpbrk:
-	cmpo	g6,g7		# is brkset char equal to string char?
-	ldob	(g2),g5		# fetch next brkset char
-	addo	1,g2,g2		# bump brkset ptr
-	be.f	Lexit_char_found
-	cmpo	g6,0		# is brkset_string exhausted?
-	lda	(g5),g6
-	bne.t	Lscan_set_strpbrk # check next character of brkset
-	addo	1,g0,g0		# check next character of string
-	b	Lnext_char_strpbrk
-
-Lexit_char_not_found:
-	mov	0,g0		# return null if brkset char not found in string
-Lexit_char_found:
-	mov	g14,g13		# save return address
-	lda	0,g14		# conform to register conventions
-	bx	(g13)
-
-/* end of strpbrk */
diff --git a/newlib/libc/machine/i960/strrchr.S b/newlib/libc/machine/i960/strrchr.S
deleted file mode 100644
index 96fe5c269..000000000
--- a/newlib/libc/machine/i960/strrchr.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*******************************************************************************
- * 
- * Copyright (c) 1993 Intel Corporation
- * 
- * Intel hereby grants you permission to copy, modify, and distribute this
- * software and its documentation.  Intel grants this permission provided
- * that the above copyright notice appears in all copies and that both the
- * copyright notice and this permission notice appear in supporting
- * documentation.  In addition, Intel grants this permission provided that
- * you prominently mark as "not part of the original" any modifications
- * made to this software or documentation, and that the name of Intel
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software or the documentation without specific,
- * written prior permission.
- * 
- * Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
- * IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
- * OR FITNESS FOR A PARTICULAR PURPOSE.  Intel makes no guarantee or
- * representations regarding the use of, or the results of the use of,
- * the software and documentation in terms of correctness, accuracy,
- * reliability, currentness, or otherwise; and you rely on the software,
- * documentation and results solely at your own risk.
- *
- * IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
- * LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
- * OF ANY KIND.  IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
- * PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
- * 
- ******************************************************************************/
-
-	.file "strrchr.s"
-#ifdef	__i960_BIG_ENDIAN__
-#error	"This does not work in big-endian"
-#endif
-
-#ifdef	__PIC
-	.pic
-#endif
-#ifdef	__PID
-	.pid
-#endif
-
-/*
- * (c) copyright 1988,1993 Intel Corp., all rights reserved
- */
-
-/*
-	procedure strrchr  (optimized assembler version for the 80960K series)
-
-	src_addr = strrchr (src_addr, char)
-
-	return a pointer to the last byte that contains the indicated
-	byte in the source string.  Return null if the byte is not found.
-
-	Undefined behavior will occur if the end of the source string (i.e. 
-	the terminating null byte) is in the last two words of the program's
-	allocated memory space.  This is so because strrchr fetches ahead.  
-	Disallowing the fetch ahead would impose a severe performance penalty.
-
-	Strategy:
-
-	Fetch the source string by words and scanbyte the words for the 
-	char until either a word with the byte is found or the null byte is
-	encountered.  In the former case, move through the word to find the
-	matching byte and save its memory address, then continue the search.  
-	In the latter case, return the saved address, or zero (null) if none
-	was ever found to save.
-
-	Tactics:
-
-	1) Do NOT try to fetch the words in a word aligned manner because,
-	in my judgement, the performance degradation experienced due to 
-	non-aligned accesses does NOT outweigh the time and complexity added 
-	by the preamble that would be necessary to assure alignment.  This 
-	is supported by the intuition that most source arrays (even more 
-	true of most big source arrays) will be word aligned to begin with.
-*/
-
-	.globl	_strrchr
-	.globl	__strrchr
-	.leafproc	_strrchr, __strrchr
-	.align	2
-_strrchr:
-#ifdef __PIC
-	lda 	Lrett-(.+8)(ip),g14
-#else
-	lda 	Lrett,g14
-#endif
-__strrchr:
-
-	ld	(g0),g4		# fetch first word
-	lda	0xff,g7		# byte extraction mask
-	and	g1,g7,g1	# make char an 8-bit ordinal
-	shlo	8,g1,g2		# broadcast the char to four bytes
-	or	g1,g2,g2
-	shlo	16,g2,g5
-	or	g2,g5,g3
-	mov	g14,g13		# preserve return address
-	addo	4,g0,g2		# post-increment src pointer
-	mov	1,g0		# prepare to return null pointer
-	mov 	g3,g6		# prepare to return null pointer
-
-Lsearch_for_word_with_char_or_null:
-	mov	g4,g5		# copy word
-	scanbyte 0,g5		# check for null byte
-	ld	(g2),g4		# fetch next word of src
-	bo	Lword_has_null	# branch if null found 
-	scanbyte g3,g5		# check for byte with char
-	addo	4,g2,g2		# post-increment src pointer
-	bno	Lsearch_for_word_with_char_or_null   # branch if no copy of char
-	mov	g5,g6		# save word that has char in it (at least once)
-	subo	4,g2,g0		# save addr of byte after word with char
-	b	Lsearch_for_word_with_char_or_null
-
-Lword_has_null:
-	subo	4,g2,g2		# move src pointer back to word with null
-Lfind_null:
-	addo	1,g2,g2		# advance src pointer to byte after current
-	and	g7,g5,g14	# extract next byte
-	cmpo	g1,g14		# is current byte char?
-	shro	8,g5,g5		# position next byte for extraction
-	bne	1f		# skip if not char sought after
-	mov	g2,g0		# save addr of byte after char
-	mov	g3,g6		# save word of all char to short circuit search
-1:	cmpobne	0,g14,Lfind_null	# is current byte null?
-
-Lfind_last_char:
-	rotate	8,g6,g6		# position next highest byte
-	and	g7,g6,g5	# extract byte
-	subo	1,g0,g0		# move pointer to that byte (or nullify)
-	cmpobne	g5,g1,Lfind_last_char	# branch if not at char
-
-	bx	(g13)		# g0 = addr of char in src (or null);  g14 = 0
-Lrett:
-	ret
-
-/* end of strrchr */
diff --git a/newlib/libc/machine/iq2000/Makefile.am b/newlib/libc/machine/iq2000/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/iq2000/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/iq2000/Makefile.in b/newlib/libc/machine/iq2000/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/iq2000/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/iq2000/aclocal.m4 b/newlib/libc/machine/iq2000/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/iq2000/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/iq2000/configure b/newlib/libc/machine/iq2000/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/iq2000/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/iq2000/configure.in b/newlib/libc/machine/iq2000/configure.in
deleted file mode 100644
index c6aa0d1fb..000000000
--- a/newlib/libc/machine/iq2000/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/iq2000 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/iq2000/setjmp.S b/newlib/libc/machine/iq2000/setjmp.S
deleted file mode 100644
index cb094630d..000000000
--- a/newlib/libc/machine/iq2000/setjmp.S
+++ /dev/null
@@ -1,51 +0,0 @@
-/* This is a simple version of setjmp and longjmp for iq2000. */
-
-
-/* int setjmp (jmp_buf);  */
-	.globl	setjmp
-	.ent	setjmp
-setjmp:
-	sw	r16,0(r4)	/* rs0 */
-	sw	r17,4(r4)	/* rs1 */
-	sw	r18,8(r4)	/* rs2 */
-	sw	r19,12(r4)	/* rs3 */
-	sw	r20,16(r4)	/* rs4 */
-	sw	r21,20(r4)	/* rs5 */
-	sw	r22,24(r4)	/* rs6 */
-	sw	r23,28(r4)	/* rs7 */
-	sw	r30,32(r4)	/* rs8 */
-
-	sw	r29,36(r4)
-	sw	r31,40(r4)
-
-	move	r2,r0
-
-	j	r31
-
-	.end	setjmp
-
-/* volatile void longjmp (jmp_buf, int);  */
-	.globl	longjmp
-	.ent	longjmp
-longjmp:
-	lw	r16,0(r4)	/* rs0 */
-	lw	r17,4(r4)	/* rs1 */
-	lw	r18,8(r4)	/* rs2 */
-	lw	r19,12(r4)	/* rs3 */
-	lw	r20,16(r4)	/* rs4 */
-	lw	r21,20(r4)	/* rs5 */
-	lw	r22,24(r4)	/* rs6 */
-	lw	r23,28(r4)	/* rs7 */
-	lw	r30,32(r4)	/* rs8 */
-
-	lw	r29,36(r4)
-	lw	r31,40(r4)
-
-	bne	r5,r0,1f
-	li	r5,1
-1:
-	move	r2,r5
-
-	j	r31
-
-	.end longjmp
diff --git a/newlib/libc/machine/m32r/Makefile.am b/newlib/libc/machine/m32r/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/m32r/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/m32r/Makefile.in b/newlib/libc/machine/m32r/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/m32r/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/m32r/aclocal.m4 b/newlib/libc/machine/m32r/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/m32r/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/m32r/configure b/newlib/libc/machine/m32r/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/m32r/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/m32r/configure.in b/newlib/libc/machine/m32r/configure.in
deleted file mode 100644
index e53227db5..000000000
--- a/newlib/libc/machine/m32r/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/m32r configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/m32r/setjmp.S b/newlib/libc/machine/m32r/setjmp.S
deleted file mode 100644
index e6938efe3..000000000
--- a/newlib/libc/machine/m32r/setjmp.S
+++ /dev/null
@@ -1,52 +0,0 @@
-# setjmp/longjmp for m32r.  The jmpbuf looks like this:
-#
-# Register	jmpbuf offset
-# reserved	0x00	
-# R8		0x04
-# R9		0x08
-# R10		0x0c
-# R11		0x10
-# R12		0x14
-# R13 (FP)	0x18
-# R14 (LR)	0x1c
-# R15 (SP)	0x20
-# reserved	0x24
-
-	.text
-	.global	setjmp
-setjmp:
-	;addi	r0, #-4		; commented out as first word is reserved
-	;st	r1, @+r0
-	st	r8, @+r0
-	st	r9, @+r0
-	st	r10, @+r0
-	st	r11, @+r0
-	st	r12, @+r0
-	st	r13, @+r0
-	st	r14, @+r0
-	st	r15, @+r0
-
-# Return 0 to caller.
-	ldi	r0, #0
-	jmp	lr
-
-	.global	longjmp
-longjmp:
-	addi	r0, #4		; first word is reserved
-	;ld	r1, @r0+
-	ld	r8, @r0+
-	ld	r9, @r0+
-	ld	r10, @r0+
-	ld	r11, @r0+
-	ld	r12, @r0+
-	ld	r13, @r0+
-	ld	r2, @r0+	; return address
-	ld	r15, @r0+
-
-# If caller attempted to return 0, return 1 instead.
-
-	mv	r0, r1
-	bnez	r0, .Lnonzero
-	ldi	r0, #1
-.Lnonzero:
-	jmp	r2
diff --git a/newlib/libc/machine/m68hc11/Makefile.am b/newlib/libc/machine/m68hc11/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/m68hc11/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/m68hc11/Makefile.in b/newlib/libc/machine/m68hc11/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/m68hc11/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/m68hc11/aclocal.m4 b/newlib/libc/machine/m68hc11/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/m68hc11/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/m68hc11/configure b/newlib/libc/machine/m68hc11/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/m68hc11/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/m68hc11/configure.in b/newlib/libc/machine/m68hc11/configure.in
deleted file mode 100644
index 0a78711bb..000000000
--- a/newlib/libc/machine/m68hc11/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/m68hc11 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/m68hc11/setjmp.S b/newlib/libc/machine/m68hc11/setjmp.S
deleted file mode 100644
index 38d1188dc..000000000
--- a/newlib/libc/machine/m68hc11/setjmp.S
+++ /dev/null
@@ -1,141 +0,0 @@
-/* setjmp/longjmp routines for M68HC11 & M68HC12.
- * Copyright (C) 1999, 2000, 2001, 2002 Stephane Carrez (stcarrez@nerim.fr)	
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#if __INT__ == 32
-# define val 4
-# define INT32(X) X
-#else
-# define val 2
-# define INT32(X)
-#endif
-
-#ifdef mc6811
-# define REG(X) *X
-#else
-# define REG(X) X
-#endif
-
-	.sect .text
-	.global setjmp
-	.global longjmp
-
-#ifdef mc6811
-setjmp:
-	xgdx
-	tsy
-	ldd	0,y
-	std	0,x
-	sty	2,x
-	ldd	REG(_.frame)
-	std	4,x
-	ldd	REG(_.d1)
-	std	6,x
-	ldd	REG(_.d2)
-	std	8,x
-	ldd	REG(_.d3)
-	std	10,x
-	ldd	REG(_.d4)
-	std	12,x
-	ldd	REG(_.d5)
-	std	14,x
-	ldd	REG(_.d6)
-	std	16,x
-	ldd	REG(_.d7)
-	std	18,x
-	ldd	REG(_.d8)
-	std	20,x
-INT32(	ldx	#0)
-	clra
-	clrb
-	rts
-#else
-setjmp:
-	xgdx
-	movw	0,sp,2,x+
-	sts	2,x+
-	movw	_.frame,2,x+
-	movw	_.d1,2,x+
-	movw	_.d2,2,x+
-	movw	_.d3,2,x+
-	movw	_.d4,2,x+
-	movw	_.d5,2,x+
-	movw	_.d6,2,x+
-	movw	_.d7,2,x+
-	movw	_.d8,2,x+
-INT32(	ldx	#0)
-	clra
-	clrb
-	rts
-#endif
-
-#ifdef mc6811
-longjmp:
-	xgdx
-	tsy
-	ldd	val,y
-	bne	do_jump
-	ldd	#1
-do_jump:
-	xgdy
-	ldd	4,x
-	std	REG(_.frame)
-	ldd	6,x
-	std	REG(_.d1)
-	ldd	8,x
-	std	REG(_.d2)
-	ldd	10,x
-	std	REG(_.d3)
-	ldd	12,x
-	std	REG(_.d4)
-	ldd	14,x
-	std	REG(_.d5)
-	ldd	16,x
-	std	REG(_.d6)
-	ldd	18,x
-	std	REG(_.d7)
-	ldd	20,x
-	std	REG(_.d8)
-	ldd	0,x
-	ldx	2,x
-	txs
-	std	0,x
-INT32(	ldx	#0)
-	xgdy
-	rts
-#else
-
-longjmp:
-	xgdx
-	ldy	val,sp
-	bne	do_jump
-	ldy	#1
-do_jump:
-	ldd	4,x+
-	movw	2,x+,_.frame
-	movw	0,x,_.d1
-	movw	2,x,_.d2
-	movw	4,x,_.d3
-	movw	6,x,_.d4
-	movw	8,x,_.d5
-	movw	10,x,_.d6
-	movw	12,x,_.d7
-	movw	14,x,_.d8
-	ldx	-4,x
-	txs
-	std	0,x
-INT32(	ldx	#0)
-	xgdy
-	rts
-#endif
-	
diff --git a/newlib/libc/machine/m68k/Makefile.am b/newlib/libc/machine/m68k/Makefile.am
deleted file mode 100644
index 62a2ef897..000000000
--- a/newlib/libc/machine/m68k/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S strcpy.c strlen.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/m68k/Makefile.in b/newlib/libc/machine/m68k/Makefile.in
deleted file mode 100644
index 9786d8263..000000000
--- a/newlib/libc/machine/m68k/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S strcpy.c strlen.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o strcpy.o strlen.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/m68k/aclocal.m4 b/newlib/libc/machine/m68k/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/m68k/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/m68k/configure b/newlib/libc/machine/m68k/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/m68k/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/m68k/configure.in b/newlib/libc/machine/m68k/configure.in
deleted file mode 100644
index 628faed4d..000000000
--- a/newlib/libc/machine/m68k/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/m68k configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/m68k/setjmp.S b/newlib/libc/machine/m68k/setjmp.S
deleted file mode 100644
index 02a02c4e1..000000000
--- a/newlib/libc/machine/m68k/setjmp.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-.global SYM (setjmp)
-.global SYM (longjmp)
-
-SYM (setjmp):
-	moveal sp@(4),a0
-	movel sp@(0),a0@(12)
-	movel sp,a0@(8)
-	moveml d2-d7/a2-a6,a0@(20)
-	clrl d0
-	rts
-
-SYM (longjmp):
-	moveal sp@(4),a0
-	movel sp@(8),d0
-	bne 1f
-	movel &1,d0
-1:
-	moveml a0@(20),d2-d7/a2-a6
-	moveal a0@(8),sp
-	movel a0@(12),sp@
-	rts
-
-#ifdef M68881
-.global SYM (setjmp_68881)
-.global SYM (longjmp_68881)
-
-SYM (setjmp_68881):
-	moveal sp@(4),a0
-	movel sp@(0),a0@(12)
-	movel sp,a0@(8)
-	moveml d2-d7/a2-a6,a0@(20)
-	fmovemx fp2-fp7,a0@(64)
-	clrl d0
-	rts
-
-SYM (longjmp_68881):
-	moveal sp@(4),a0
-	fmovemx a0@(64),fp2-fp7
-	movel sp@(8),d0
-	bne 1f
-	movel &1,d0
-1:
-	moveml a0@(20),d2-d7/a2-a6
-	moveal a0@(8),sp
-	movel a0@(12),sp@
-	rts
-#endif
diff --git a/newlib/libc/machine/m68k/strcpy.c b/newlib/libc/machine/m68k/strcpy.c
deleted file mode 100644
index ccc914193..000000000
--- a/newlib/libc/machine/m68k/strcpy.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  C library strcpy routine
- *
- *  This routine has been optimized for the CPU32+.
- *  It should run on all 68k machines.
- *
- *  W. Eric Norum
- *  Saskatchewan Accelerator Laboratory
- *  University of Saskatchewan
- *  Saskatoon, Saskatchewan, CANADA
- *  eric@skatter.usask.ca
- */
-
-#include <string.h>
-
-/*
- * Copy bytes using CPU32+ loop mode if possible
- */
-
-char *
-strcpy (char *to, const char *from)
-{
-	char *pto = to;
-	unsigned int n = 0xFFFF;
-
-	asm volatile ("1:\n"
-	     "\tmove.b (%0)+,(%1)+\n"
-#if defined(__mcpu32__)
-	     "\tdbeq %2,1b\n"
-#endif
-	     "\tbne.b 1b\n" :
-		"=a" (from), "=a" (pto), "=d" (n) :
-		 "0" (from),  "1" (pto), "2" (n) :
-		 "cc", "memory");
-	return to;
-}
diff --git a/newlib/libc/machine/m68k/strlen.c b/newlib/libc/machine/m68k/strlen.c
deleted file mode 100644
index 589a69751..000000000
--- a/newlib/libc/machine/m68k/strlen.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  C library strlen routine
- *
- *  This routine has been optimized for the CPU32+.
- *  It should run on all 68k machines.
- *
- *  W. Eric Norum
- *  Saskatchewan Accelerator Laboratory
- *  University of Saskatchewan
- *  Saskatoon, Saskatchewan, CANADA
- *  eric@skatter.usask.ca
- */
-
-#include <string.h>
-
-/*
- * Test bytes using CPU32+ loop mode if possible.
- */
-size_t
-strlen (const char *str)
-{
-	unsigned int n = ~0;
-	const char *cp = str;
-
-	asm volatile ("1:\n"
-	     "\ttst.b (%0)+\n"
-#if defined(__mcpu32__)
-	     "\tdbeq %1,1b\n"
-#endif
-	     "\tbne.b 1b\n" :
-		"=a" (cp), "=d" (n) :
-		 "0" (cp),  "1" (n) :
-		 "cc");
-	return (cp - str) - 1;
-}
diff --git a/newlib/libc/machine/m88k/Makefile.am b/newlib/libc/machine/m88k/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/m88k/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/m88k/Makefile.in b/newlib/libc/machine/m88k/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/m88k/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/m88k/aclocal.m4 b/newlib/libc/machine/m88k/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/m88k/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/m88k/configure b/newlib/libc/machine/m88k/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/m88k/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/m88k/configure.in b/newlib/libc/machine/m88k/configure.in
deleted file mode 100644
index d78864a39..000000000
--- a/newlib/libc/machine/m88k/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/m88k configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/m88k/setjmp.S b/newlib/libc/machine/m88k/setjmp.S
deleted file mode 100644
index 24d44b6b1..000000000
--- a/newlib/libc/machine/m88k/setjmp.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* This is a simple version of setjmp and longjmp.
-
-   Ian Lance Taylor, Cygnus Support, 15 July 1993.  */
-
-/* We need to save the address of the return instruction, which is in
-   r1, as well as general register r14 through r25.  If we are
-   compiling for the 88110 with the extended register file, we also
-   need to save registers x22 through x29.  The jmp_buf should be 52
-   bytes long in the one case, 84 bytes in the other.  */
-
-/* int setjmp (jmp_buf);  */
-	globl	_setjmp
-_setjmp:
-	st	r1,r2,0
-	st.d	r14,r2,4
-	st.d	r16,r2,12
-	st.d	r18,r2,20
-	st.d	r20,r2,28
-	st.d	r22,r2,36
-	st.d	r24,r2,44
-#ifdef __m88110__
-	/* These instructions are just a guess, and gas doesn't
-	   support them anyhow.  */
-	st.d	x22,r2,52
-	st.d	x24,r2,60
-	st.d	x26,r2,68
-	st.d	x28,r2,76
-#endif
-	jmp	r1
-
-	global	_longjmp
-_longjmp:
-	ld	r1,r2,0
-	ld.d	r14,r2,4
-	ld.d	r16,r2,12
-	ld.d	r18,r2,20
-	ld.d	r20,r2,28
-	ld.d	r22,r2,36
-	ld.d	r24,r2,44
-#ifdef __m88110__
-	/* These instructions are just a guess, and gas doesn't
-	   support them anyhow.  */
-	ld.d	x22,r2,52
-	ld.d	x24,r2,60
-	ld.d	x26,r2,68
-	ld.d	x28,r2,76
-#endif
-	jmp	r1
diff --git a/newlib/libc/machine/mips/Makefile.am b/newlib/libc/machine/mips/Makefile.am
deleted file mode 100644
index 74c08bca5..000000000
--- a/newlib/libc/machine/mips/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S strlen.c strcmp.c strncpy.c memset.c memcpy.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/mips/Makefile.in b/newlib/libc/machine/mips/Makefile.in
deleted file mode 100644
index 790227724..000000000
--- a/newlib/libc/machine/mips/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S strlen.c strcmp.c strncpy.c memset.c memcpy.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o strlen.o strcmp.o strncpy.o memset.o memcpy.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/mips/aclocal.m4 b/newlib/libc/machine/mips/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/mips/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/mips/configure b/newlib/libc/machine/mips/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/mips/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/mips/configure.in b/newlib/libc/machine/mips/configure.in
deleted file mode 100644
index 64d4855db..000000000
--- a/newlib/libc/machine/mips/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/mips configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/mips/machine/regdef.h b/newlib/libc/machine/mips/machine/regdef.h
deleted file mode 100644
index 3906de6f4..000000000
--- a/newlib/libc/machine/mips/machine/regdef.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* regdef.h -- define MIPS register names.  */
-
-#ifndef mips_regdef_h
-
-#define zero	$0
-#define v0	$2
-#define v1	$3
-#define a0	$4
-#define a1	$5
-#define a2	$6
-#define a3	$7
-#define t0	$8
-#define t1	$9
-#define t2	$10
-#define t3	$11
-#define t4	$12
-#define t5	$13
-#define t6	$14
-#define t7	$15
-#define s0	$16
-#define s1	$17
-#define s2	$18
-#define s3	$19
-#define s4	$20
-#define s5	$21
-#define s6	$22
-#define s7	$23
-#define t8	$24
-#define t9	$25
-#define k0	$26
-#define k1	$27
-#define gp	$gp
-#define sp	$sp
-#define s8	$30
-#define ra	$31
-#define pc	$pc
-
-#endif /* mips_regdef_h */
diff --git a/newlib/libc/machine/mips/memcpy.c b/newlib/libc/machine/mips/memcpy.c
deleted file mode 100644
index 761f7e9ab..000000000
--- a/newlib/libc/machine/mips/memcpy.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
-FUNCTION
-        <<memcpy>>---copy memory regions, optimized for the mips processors
-
-ANSI_SYNOPSIS
-        #include <string.h>
-        void* memcpy(void *<[out]>, const void *<[in]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-        void *memcpy(<[out]>, <[in]>, <[n]>
-        void *<[out]>;
-        void *<[in]>;
-        size_t <[n]>;
-
-DESCRIPTION
-        This function copies <[n]> bytes from the memory region
-        pointed to by <[in]> to the memory region pointed to by
-        <[out]>.
-
-        If the regions overlap, the behavior is undefined.
-
-RETURNS
-        <<memcpy>> returns a pointer to the first byte of the <[out]>
-        region.
-
-PORTABILITY
-<<memcpy>> is ANSI C.
-
-<<memcpy>> requires no supporting OS subroutines.
-
-QUICKREF
-        memcpy ansi pure
-	*/
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <limits.h>
-
-#ifdef __mips64
-#define wordtype long long
-#else
-#define wordtype long
-#endif
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (wordtype) - 1)) | ((long)Y & (sizeof (wordtype) - 1)))
-
-/* How many bytes are copied each iteration of the 4X unrolled loop.  */
-#define BIGBLOCKSIZE    (sizeof (wordtype) << 2)
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LITTLEBLOCKSIZE (sizeof (wordtype))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < BIGBLOCKSIZE)
-
-_PTR
-_DEFUN (memcpy, (dst0, src0, len0),
-	_PTR dst0 _AND
-	_CONST _PTR src0 _AND
-	size_t len0)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__) || defined(__mips16)
-  char *dst = (char *) dst0;
-  char *src = (char *) src0;
-
-  _PTR save = dst0;
-
-  while (len0--)
-    {
-      *dst++ = *src++;
-    }
-
-  return save;
-#else
-  char *dst = dst0;
-  _CONST char *src = src0;
-  wordtype *aligned_dst;
-  _CONST wordtype *aligned_src;
-  int   len =  len0;
-  size_t iter;
-
-  /* Handle aligned moves here.  */
-  if (!UNALIGNED (src, dst))
-    {
-      iter = len / BIGBLOCKSIZE;
-      len = len % BIGBLOCKSIZE;
-      aligned_dst = (wordtype *)dst;
-      aligned_src = (wordtype *)src;
-
-	  /* Copy 4X long or long long words at a time if possible.  */
-      while (iter > 0)
-	{
-	  wordtype tmp0 = aligned_src[0];
-	  wordtype tmp1 = aligned_src[1];
-	  wordtype tmp2 = aligned_src[2];
-	  wordtype tmp3 = aligned_src[3];
-
-	  aligned_dst[0] = tmp0;
-	  aligned_dst[1] = tmp1;
-	  aligned_dst[2] = tmp2;
-	  aligned_dst[3] = tmp3;
-	  aligned_src += 4;
-	  aligned_dst += 4;
-	  iter--;
-	}
-
-      /* Copy one long or long long word at a time if possible.  */
-      iter = len / LITTLEBLOCKSIZE;
-      len = len % LITTLEBLOCKSIZE;
-
-      while (iter > 0)
-	{
-	  *aligned_dst++ = *aligned_src++;
-	  iter--;
-	}
-
-      /* Pick up any residual with a byte copier.  */
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-
-      while (len > 0)
-	{
-	  *dst++ = *src++;
-	  len--;
-	}
-
-      return dst0;
-    }
-
-  /* Handle unaligned moves here, using lwr/lwl and swr/swl where possible */
-  else
-    {
-#ifndef NO_UNALIGNED_LOADSTORE
-      int tmp;
-      int *int_src = (int *)src;
-      int *int_dst = (int *)dst;
-      iter = len / 4;
-      len = len % 4;
-      while (iter > 0)
-	{
-	  __asm__ ("ulw %0,%1" : "=r" (tmp) : "m" (*int_src));
-	  iter--;
-	  int_src++;
-	  __asm__ ("usw %1,%0" : "=m" (*int_dst) : "r" (tmp));
-	  int_dst++;
-	}
-
-      /* Pick up any residual with a byte copier.  */
-      dst = (char*)int_dst;
-      src = (char*)int_src;
-#endif
-
-      while (len > 0)
-	{
-	  *dst++ = *src++;
-	  len--;
-	}
-
-      return dst0;
-    }
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/machine/mips/memset.c b/newlib/libc/machine/mips/memset.c
deleted file mode 100644
index 786ba7971..000000000
--- a/newlib/libc/machine/mips/memset.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-FUNCTION
-	<<memset>>---set an area of memory, optimized for the MIPS processors
-
-INDEX
-	memset
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void *memset(const void *<[dst]>, int <[c]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	void *memset(<[dst]>, <[c]>, <[length]>)
-	void *<[dst]>;
-	int <[c]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	This function converts the argument <[c]> into an unsigned
-	char and fills the first <[length]> characters of the array
-	pointed to by <[dst]> to the value.
-
-RETURNS
-	<<memset>> returns the value of <[m]>.
-
-PORTABILITY
-<<memset>> is ANSI C.
-
-    <<memset>> requires no supporting OS subroutines.
-
-QUICKREF
-	memset ansi pure
-*/
-
-#include <string.h>
-
-#ifdef __mips64
-#define wordtype long long
-#else
-#define wordtype long
-#endif
-
-#define LBLOCKSIZE     (sizeof(wordtype))
-#define UNALIGNED(X)   ((long)(X) & (LBLOCKSIZE - 1))
-#define TOO_SMALL(LEN) ((LEN) < LBLOCKSIZE * 4)
-
-_PTR 
-_DEFUN (memset, (m, c, n),
-	_PTR m _AND
-	int c _AND
-	size_t n)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__) || defined(__mips16)
-  char *s = (char *) m;
-
-  while (n-- != 0)
-    {
-      *s++ = (char) c;
-    }
-
-  return m;
-#else
-  char *s = (char *) m;
-  int i;
-  unsigned wordtype buffer;
-  unsigned wordtype *aligned_addr;
-  unsigned short *short_addr;
-  size_t iter;
-
-  if (!TOO_SMALL (n))
-    {
-      int unaligned = UNALIGNED (s);
-
-      /* We know that N is >= LBLOCKSIZE so we can just word
-         align the S without having to check the length. */
-
-      if (unaligned)
-	{
-	  while (unaligned++ < LBLOCKSIZE)
-	    *s++ = (char)c, n--;
-	}
-
-      /* S is now word-aligned so we can process the remainder
-         in word sized chunks except for a few (< LBLOCKSIZE)
-         bytes which might be left over at the end. */
-
-      aligned_addr = (unsigned wordtype *)s;
-
-      /* Store C into each char sized location in BUFFER so that
-         we can set large blocks quickly.  */
-      c &= 0xff;
-      buffer = c;
-      if (buffer != 0)
-	{
-	  if (LBLOCKSIZE == 4)
-	    {
-	       buffer |= (buffer << 8);
-	       buffer |= (buffer << 16);
-	    }
-	  else if (LBLOCKSIZE == 8)
-	    {
-	      buffer |= (buffer << 8);
-	      buffer |= (buffer << 16);
-	      buffer |= ((buffer << 31) << 1);
-	    }
-	  else
-	    {
-	      for (i = 1; i < LBLOCKSIZE; i++)
-		buffer = (buffer << 8) | c;
-	    }
-        }
-
-      iter = n / (2*LBLOCKSIZE);
-      n = n % (2*LBLOCKSIZE);
-      while (iter > 0)
-	{
-	  aligned_addr[0] = buffer;
-	  aligned_addr[1] = buffer;
-	  aligned_addr += 2;
-	  iter--;
-	}
-
-      if (n >= LBLOCKSIZE)
-	{
-	  *aligned_addr++ = buffer;
-	  n -= LBLOCKSIZE;
-	}
-
-      /* Pick up the remainder with a bytewise loop.  */
-      s = (char*)aligned_addr;
-    }
-
-  while (n > 0)
-    {
-      *s++ = (char)c;
-      n--;
-    }
-
-  return m;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/machine/mips/setjmp.S b/newlib/libc/machine/mips/setjmp.S
deleted file mode 100644
index 268cb1862..000000000
--- a/newlib/libc/machine/mips/setjmp.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/* This is a simple version of setjmp and longjmp for MIPS 32 and 64.
-
-   Ian Lance Taylor, Cygnus Support, 13 May 1993.  */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#define GPR_LAYOUT		\
-	GPR_OFFSET ($16, 0);	\
-	GPR_OFFSET ($17, 1);	\
-	GPR_OFFSET ($18, 2);	\
-	GPR_OFFSET ($19, 3);	\
-	GPR_OFFSET ($20, 4);	\
-	GPR_OFFSET ($21, 5);	\
-	GPR_OFFSET ($22, 6);	\
-	GPR_OFFSET ($23, 7);	\
-	GPR_OFFSET ($29, 8);	\
-	GPR_OFFSET ($30, 9);	\
-	GPR_OFFSET ($31, 10)
-
-#define NUM_GPRS_SAVED 11
-
-#ifdef __mips_hard_float
-#define FPR_LAYOUT		\
-	FPR_OFFSET ($f20, 0);	\
-	FPR_OFFSET ($f21, 1);	\
-	FPR_OFFSET ($f22, 2);	\
-	FPR_OFFSET ($f23, 3);	\
-	FPR_OFFSET ($f24, 4);	\
-	FPR_OFFSET ($f25, 5);	\
-	FPR_OFFSET ($f26, 6);	\
-	FPR_OFFSET ($f27, 7);	\
-	FPR_OFFSET ($f28, 8);	\
-	FPR_OFFSET ($f29, 9);	\
-	FPR_OFFSET ($f30, 10);	\
-	FPR_OFFSET ($f31, 11)
-#else
-#define FPR_LAYOUT
-#endif
-
-#ifdef __mips64
-#define BYTES_PER_WORD 8
-#define LOAD_GPR ld
-#define LOAD_FPR ldc1
-#define STORE_GPR sd
-#define STORE_FPR sdc1
-#else
-#define BYTES_PER_WORD 4
-#define LOAD_GPR lw
-#define LOAD_FPR lwc1
-#define STORE_GPR sw
-#define STORE_FPR swc1
-#endif
-
-#define GPOFF(INDEX) (INDEX * BYTES_PER_WORD)
-#define FPOFF(INDEX) ((INDEX + NUM_GPRS_SAVED) * BYTES_PER_WORD)
-
-/* int setjmp (jmp_buf);  */
-	.globl	setjmp
-	.ent	setjmp
-setjmp:
-	.frame	$sp,0,$31
-
-#define GPR_OFFSET(REG, INDEX) STORE_GPR REG,GPOFF(INDEX)($4)
-#define FPR_OFFSET(REG, INDEX) STORE_FPR REG,FPOFF(INDEX)($4)
-	GPR_LAYOUT
-	FPR_LAYOUT
-#undef GPR_OFFSET
-#undef FPR_OFFSET
-
-	move	$2,$0
-	j	$31
-
-	.end	setjmp
-
-/* volatile void longjmp (jmp_buf, int);  */
-	.globl	longjmp
-	.ent	longjmp
-longjmp:
-	.frame	$sp,0,$31
-
-#define GPR_OFFSET(REG, INDEX) LOAD_GPR REG,GPOFF(INDEX)($4)
-#define FPR_OFFSET(REG, INDEX) LOAD_FPR REG,FPOFF(INDEX)($4)
-	GPR_LAYOUT
-	FPR_LAYOUT
-#undef GPR_OFFSET
-#undef FPR_OFFSET
-
-	bne	$5,$0,1f
-	li	$5,1
-1:
-	move	$2,$5
-	j	$31
-
-	.end longjmp
diff --git a/newlib/libc/machine/mips/strcmp.c b/newlib/libc/machine/mips/strcmp.c
deleted file mode 100644
index c9c1c6595..000000000
--- a/newlib/libc/machine/mips/strcmp.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * strcmp.c -- strcmp function.  On at least some MIPS chips, a strcmp that is
- * unrolled twice is faster than the 'optimized' C version in newlib.
- *
- * Copyright (c) 2001 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.  */
-
-#include <stddef.h>
-#include <string.h>
-#include <stdlib.h>
-
-int
-strcmp (const char *s1, const char *s2)
-{ 
-  unsigned const char *us1 = (unsigned const char *)s1;
-  unsigned const char *us2 = (unsigned const char *)s2;
-  int c1a, c1b;
-  int c2a, c2b;
-
-  /* If the pointers aren't both aligned to a 16-byte boundary, do the
-     comparison byte by byte, so that we don't get an invalid page fault if we
-     are comparing a string whose null byte is at the last byte on the last
-     valid page.  */
-  if (((((long)us1) | ((long)us2)) & 1) == 0)
-    {
-      c1a = *us1;
-      for (;;)
-	{
-	  c1b = *us2;
-	  us1 += 2;
-	  if (c1a == '\0')
-	    goto ret1;
-
-	  c2a = us1[-1];
-	  if (c1a != c1b)
-	    goto ret1;
-
-	  c2b = us2[1];
-	  us2 += 2;
-	  if (c2a == '\0')
-	    break;
-
-	  c1a = *us1;
-	  if (c2a != c2b)
-	    break;
-	}
-
-      return c2a - c2b;
-    }
-  else
-    {
-      do
-	{
-	  c1a = *us1++;
-	  c1b = *us2++;
-	}
-      while (c1a != '\0' && c1a == c1b);
-    }
-
- ret1:
-  return c1a - c1b;
-}
diff --git a/newlib/libc/machine/mips/strlen.c b/newlib/libc/machine/mips/strlen.c
deleted file mode 100644
index 158fb9f3f..000000000
--- a/newlib/libc/machine/mips/strlen.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * strlen.c -- strlen function.  On at least some MIPS chips, a simple
- * strlen is faster than the 'optimized' C version.
- *
- * Copyright (c) 2001, 2002 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#include <stddef.h>
-#include <string.h>
-
-/* MIPS16 needs to come first.  */
-
-#if defined(__mips16)
-size_t
-strlen (const char *str)
-{
-  const char *start = str;
-
-  while (*str++ != '\0')
-    ;
-
-  return str - start - 1;
-}
-#elif defined(__mips64)
-__asm__(""			/* 64-bit MIPS targets */
-	"	.set	noreorder\n"
-	"	.set	nomacro\n"
-	"	.globl	strlen\n"
-	"	.ent	strlen\n"
-	"strlen:\n"
-	"	daddiu	$2,$4,1\n"
-	"\n"
-	"1:	lbu	$3,0($4)\n"
-	"	bnez	$3,1b\n"
-	"	daddiu	$4,$4,1\n"
-	"\n"
-	"	jr	$31\n"
-	"	dsubu	$2,$4,$2\n"
-	"	.end	strlen\n"
-	"	.set	macro\n"
-	"	.set	reorder\n");
-
-#else
-__asm__(""			/* 32-bit MIPS targets */
-	"	.set	noreorder\n"
-	"	.set	nomacro\n"
-	"	.globl	strlen\n"
-	"	.ent	strlen\n"
-	"strlen:\n"
-	"	addiu	$2,$4,1\n"
-	"\n"
-	"1:	lbu	$3,0($4)\n"
-	"	bnez	$3,1b\n"
-	"	addiu	$4,$4,1\n"
-	"\n"
-	"	jr	$31\n"
-	"	subu	$2,$4,$2\n"
-	"	.end	strlen\n"
-	"	.set	macro\n"
-	"	.set	reorder\n");
-#endif
diff --git a/newlib/libc/machine/mips/strncpy.c b/newlib/libc/machine/mips/strncpy.c
deleted file mode 100644
index a2ceb2c77..000000000
--- a/newlib/libc/machine/mips/strncpy.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * strncpy.S -- strncmp function.  On at least some MIPS chips, you get better
- * code by hand unrolling the loops, and by using store words to zero the
- * remainder of the buffer than the default newlib C version.
- *
- * Copyright (c) 2001 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.  */
-
-#include <string.h>
-#include <stddef.h>
-#include <stdlib.h>
-
-#if !defined(__GNUC__) || (__GNUC__ < 3)
-#define __builtin_expect(a,b) a
-
-#else
-#ifdef __mips64
-/* Don't use limits test for the size of long, in order to allow the use of
-   64-bit stores on MIPS3 machines, even if -mlong32 was used.  */
-typedef unsigned word_type __attribute__ ((mode (DI)));
-#else
-typedef unsigned word_type __attribute__ ((mode (SI)));
-#endif
-
-typedef unsigned si_type __attribute__ ((mode (SI)));
-typedef unsigned hi_type __attribute__ ((mode (HI)));
-
-#ifndef UNROLL_FACTOR
-#define UNROLL_FACTOR 4
-
-#elif (UNROLL_FACTOR != 2) && (UNROLL_FACTOR != 4)
-#error "UNROLL_FACTOR must be 2 or 4"
-#endif
-#endif
-
-char *
-strncpy (char *dst0, const char *src0, size_t count)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__) || defined(__mips16) || !defined(__GNUC__) || (__GNUC__ < 3)
-  char *dst, *end;
-  const char *src;
-  int ch;
-
-  dst = dst0;
-  src = src0;
-  end = dst + count;
-  while (dst != end)
-    {
-      *dst++ = ch = *src++;
-      if (__builtin_expect (ch == '\0', 0))
-	{
-	  while (dst != end)
-	    *dst++ = '\0';
-
-	  break;
-	}
-    }
-
-  return dst0;
-
-#else
-  unsigned char *dst;
-  unsigned char *dst_end;
-  unsigned char *end;
-  const unsigned char *src;
-  int ch0, ch1;
-#if UNROLL_FACTOR > 2
-  int ch2, ch3;
-#endif
-  int ch;
-  int odd_bytes;
-  size_t long_count;
-
-  dst = (unsigned char *)dst0;
-  src = (unsigned const char *)src0;
-  if (__builtin_expect (count >= 4, 1))
-    {
-      odd_bytes = (count & (UNROLL_FACTOR - 1));
-      count -= odd_bytes;
-
-      do
-	{
-	  ch0 = src[0];
-	  ch1 = src[1];
-#if UNROLL_FACTOR > 2
-	  ch2 = src[2];
-	  ch3 = src[3];
-#endif
-	  src += UNROLL_FACTOR;
-	  count -= UNROLL_FACTOR;
-
-	  dst[0] = ch0;
-	  if (ch0 == '\0')
-	    goto found_null0;
-
-	  dst[1] = ch1;
-	  if (ch1 == '\0')
-	    goto found_null1;
-
-#if UNROLL_FACTOR > 2
-	  dst[2] = ch2;
-	  if (ch2 == '\0')
-	    goto found_null2;
-
-	  dst[3] = ch3;
-	  if (ch3 == '\0')
-	    goto found_null3;
-#endif
-
-	  dst += UNROLL_FACTOR;
-	}
-      while (count);
-
-      /* fall through, count == 0, no null found, deal with last bytes */
-      count = odd_bytes;
-    }
-
-  end = dst + count;
-  while (dst != end)
-    {
-      *dst++ = ch = *src++;
-      if (ch == '\0')
-	{
-	  while (dst != end)
-	    *dst++ = '\0';
-
-	  break;
-	}
-    }
-
-  return dst0;
-
-  /* Found null byte in first byte, count has been decremented by 4, null has
-     been stored in dst[0].  */
- found_null0:
-  count++;			/* add 1 to cover remaining byte */
-  dst -= 1;			/* adjust dst += 4 gets correct ptr */
-  /* fall through */
-
-  /* Found null byte in second byte, count has been decremented by 4, null has
-     been stored in dst[1].  */
- found_null1:
-#if UNROLL_FACTOR > 2
-  count++;			/* add 1 to cover remaining byte */
-  dst -= 1;			/* adjust dst += 4 gets correct ptr */
-  /* fall through */
-
-  /* Found null byte in third byte, count has been decremented by 4, null has
-     been stored in dst[2].  */
- found_null2:
-  count++;			/* add 1 to cover remaining byte */
-  dst -= 1;			/* adjust dst += 4 gets correct ptr */
-  /* fall through */
-
-  /* Found null byte in fourth byte, count is accurate, dst has not been
-     updated yet.  */
- found_null3:
-#endif
-  count += odd_bytes;		/* restore odd byte count */
-  dst += UNROLL_FACTOR;
-
-  /* Zero fill remainder of the array.  Unroll the loop, and use word/dword
-     stores where we can.  */
-  while (count && (((long)dst) & (sizeof (word_type) - 1)) != 0)
-    {
-      count--;
-      *dst++ = 0;
-    }
-
-  while (count >= UNROLL_FACTOR*sizeof (word_type))
-    {
-      count -= UNROLL_FACTOR*sizeof (word_type);
-      dst += UNROLL_FACTOR*sizeof (word_type);
-#if UNROLL_FACTOR > 2
-      ((word_type *)(void *)dst)[-4] = 0;
-      ((word_type *)(void *)dst)[-3] = 0;
-#endif
-      ((word_type *)(void *)dst)[-2] = 0;
-      ((word_type *)(void *)dst)[-1] = 0;
-    }
-
-#if UNROLL_FACTOR > 2
-  if (count >= 2*sizeof (word_type))
-    {
-      count -= 2*sizeof (word_type);
-      ((word_type *)(void *)dst)[0] = 0;
-      ((word_type *)(void *)dst)[1] = 0;
-      dst += 2*sizeof (word_type);
-    }
-#endif 
-
-  if (count >= sizeof (word_type))
-    {
-      count -= sizeof (word_type);
-      ((word_type *)(void *)dst)[0] = 0;
-      dst += sizeof (word_type);
-    }
-
-#ifdef __mips64
-  if (count >= sizeof (si_type))
-    {
-      count -= sizeof (si_type);
-      ((si_type *)(void *)dst)[0] = 0;
-      dst += sizeof (si_type);
-    }
-#endif
-
-  if (count >= sizeof (hi_type))
-    {
-      count -= sizeof (hi_type);
-      ((hi_type *)(void *)dst)[0] = 0;
-      dst += sizeof (hi_type);
-    }
-
-  if (count)
-    *dst = '\0';
-
-  return dst0;
-#endif
-}
diff --git a/newlib/libc/machine/mn10200/Makefile.am b/newlib/libc/machine/mn10200/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/mn10200/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/mn10200/Makefile.in b/newlib/libc/machine/mn10200/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/mn10200/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/mn10200/aclocal.m4 b/newlib/libc/machine/mn10200/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/mn10200/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/mn10200/configure b/newlib/libc/machine/mn10200/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/mn10200/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/mn10200/configure.in b/newlib/libc/machine/mn10200/configure.in
deleted file mode 100644
index a6ef29e09..000000000
--- a/newlib/libc/machine/mn10200/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/mn10200 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/mn10200/setjmp.S b/newlib/libc/machine/mn10200/setjmp.S
deleted file mode 100644
index f0036b120..000000000
--- a/newlib/libc/machine/mn10200/setjmp.S
+++ /dev/null
@@ -1,33 +0,0 @@
-	.file "setjmp.S"
-
-	.section .text
-	.align 1
-	.global _setjmp
-_setjmp:
-	mov d0,a0
-	movx d2,(0,a0)
-	movx d3,(4,a0)
-	mov a1,(8,a0)
-	mov a2,(12,a0)
-	mov a3,(16,a0)
-	movx (0,a3),d0
-	movx d0,(20,a0)
-	sub d0,d0
-	rts
-
-	.global _longjmp
-_longjmp:
-	mov d0,a0
-	movx (0,a0),d2
-	movx (4,a0),d3
-	mov (8,a0),a1
-	mov (12,a0),a2
-	mov (16,a0),a3
-	movx (20,a0),d0
-	movx d0,(0,a3)
-	cmp 0,d1
-	bne L1
-	mov 1,d1
-L1:
-	mov d1,d0
-	rts
diff --git a/newlib/libc/machine/mn10300/Makefile.am b/newlib/libc/machine/mn10300/Makefile.am
deleted file mode 100644
index cf04c3ab9..000000000
--- a/newlib/libc/machine/mn10300/Makefile.am
+++ /dev/null
@@ -1,13 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S memchr.S memcmp.S memcpy.S memset.S strchr.S \
-	strcmp.S strcpy.S strlen.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/mn10300/Makefile.in b/newlib/libc/machine/mn10300/Makefile.in
deleted file mode 100644
index 5b3c4185f..000000000
--- a/newlib/libc/machine/mn10300/Makefile.in
+++ /dev/null
@@ -1,330 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S memchr.S memcmp.S memcpy.S memset.S strchr.S \
-	strcmp.S strcpy.S strlen.S
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o memchr.o memcmp.o memcpy.o memset.o strchr.o \
-strcmp.o strcpy.o strlen.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/mn10300/aclocal.m4 b/newlib/libc/machine/mn10300/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/mn10300/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/mn10300/configure b/newlib/libc/machine/mn10300/configure
deleted file mode 100755
index f7eb96f49..000000000
--- a/newlib/libc/machine/mn10300/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=memchr.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/mn10300/configure.in b/newlib/libc/machine/mn10300/configure.in
deleted file mode 100644
index 6db494158..000000000
--- a/newlib/libc/machine/mn10300/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/mn10300 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(memchr.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/mn10300/memchr.S b/newlib/libc/machine/mn10300/memchr.S
deleted file mode 100644
index 4a808f9c6..000000000
--- a/newlib/libc/machine/mn10300/memchr.S
+++ /dev/null
@@ -1,76 +0,0 @@
-	.file "memchr.S"
-
-	.section .text
-	.global _memchr
-	.type	 _memchr,@function
-_memchr:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,a0
-	mov d1,d2
-	mov (28,sp),a1
-#ifndef __OPTIMIZE_SIZE__
-	cmp 3,a1
-	bls .L44
-	mov a0,d3
-	btst 3,d3
-	bne .L44
-	mov a0,a2
-	mov 0,a3
-	clr d1
-.L29:
-	setlb
-	mov a3,d0
-	asl 8,d0
-	mov d2,a3
-	add d0,a3
-	inc d1
-	cmp 3,d1
-	lls
-	cmp 3,a1
-	bls .L48
-.L33:
-	mov (a2),d0
-	mov a3,d3
-	xor d3,d0
-	mov d0,d1
-	not d1
-	add -16843009,d0
-	and d1,d0
-	btst -2139062144,d0
-	beq .L34
-	mov a2,a0
-	clr d1
-.L38:
-	setlb
-	movbu (a0),d0
-	cmp d2,d0
-	beq .L47
-	inc a0
-	inc d1
-	cmp 3,d1
-	lls
-.L34:
-	add -4,a1
-	inc4 a2
-	cmp 3,a1
-	bhi .L33
-.L48:
-	mov a2,a0
-#endif
-.L44:
-	cmp 0,a1
-	beq .L50
-.L49:
-	setlb
-	movbu (a0),d0
-	cmp d2,d0
-	beq .L47
-	inc a0
-	sub 1,a1  
-	lne
-.L50:
-	mov 0,a0
-.L47:
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _memchr,.Lfe1-_memchr
diff --git a/newlib/libc/machine/mn10300/memcmp.S b/newlib/libc/machine/mn10300/memcmp.S
deleted file mode 100644
index 41774892b..000000000
--- a/newlib/libc/machine/mn10300/memcmp.S
+++ /dev/null
@@ -1,53 +0,0 @@
-	.file "memcmp.S"
-
-	.section .text
-	.global _memcmp
-	.type	 _memcmp,@function
-_memcmp:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,a0
-	mov d1,a1
-	mov (28,sp),a2
-#ifndef __OPTIMIZE_SIZE__
-	cmp 3,a2
-	bls .L22
-	mov a1,d2
-	or d2,d0
-	btst 3,d0
-	bne .L22
-.L17:
-	setlb
-	mov (a0),d1
-	mov (a1),d0
-	cmp d0,d1
-	bne .L22
-	inc4 a0
-	inc4 a1
-	add -4,a2
-	cmp 3,a2
-	lhi
-#endif
-.L22:
-	cmp 0,a2
-	beq .L24
-.L18:
-	setlb
-	movbu (a0),d3
-	movbu (a1),d2
-	cmp d2,d3
-	beq .L23
-	mov d3,d0
-	sub d2,d0
-	jmp .L25
-.L23:
-	inc a0
-	inc a1
-.L26:
-	sub 1,a2
-	lne
-.L24:
-	clr d0
-.L25:
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _memcmp,.Lfe1-_memcmp
diff --git a/newlib/libc/machine/mn10300/memcpy.S b/newlib/libc/machine/mn10300/memcpy.S
deleted file mode 100644
index da4a21e30..000000000
--- a/newlib/libc/machine/mn10300/memcpy.S
+++ /dev/null
@@ -1,68 +0,0 @@
-	.file "memcpy.S"
-
-	.section .text
-	.global _memcpy
-	.type	 _memcpy,@function
-_memcpy:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,d2
-	mov d1,a0
-	mov d2,a1
-	mov (28,sp),d1
-#ifndef __OPTIMIZE_SIZE__
-	mov a0,d0
-	or d2,d0
-	btst 3,d0
-	bne .L37
-	cmp 15,d1
-	bls .L34
-.L29:
-	setlb
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	add -16,d1
-	cmp 15,d1
-	lhi
-.L34:
-	cmp 3,d1
-	bls .L37
-.L33:
-	setlb
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	add -4,d1
-	cmp 3,d1
-	lhi
-#endif
-.L37:
-	cmp 0,d1
-	beq .L36
-.L38:
-	setlb
-	movbu (a0),d0
-	movbu d0,(a1)
-	inc a0
-	inc a1
-	sub 1,d1
-	lne
-.L36:
-	mov d2,a0
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _memcpy,.Lfe1-_memcpy
diff --git a/newlib/libc/machine/mn10300/memset.S b/newlib/libc/machine/mn10300/memset.S
deleted file mode 100644
index 65b2ff53b..000000000
--- a/newlib/libc/machine/mn10300/memset.S
+++ /dev/null
@@ -1,63 +0,0 @@
-	.file "memset.S"
-
-	.section .text
-	.global _memset
-	.type	 _memset,@function
-_memset:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,d3
-	mov d1,d2
-	mov (28,sp),a1
-	mov d3,a0
-#ifndef __OPTIMIZE_SIZE__
-	cmp 3,a1
-	bls .L41
-	btst 3,d3
-	bne .L41
-	extbu d2
-	mov d2,d1
-	asl 8,d1
-	or d2,d1
-	mov d1,d0
-	asl 16,d0
-	or d0,d1
-	cmp 15,a1
-	bls .L36
-.L33:
-	setlb
-	mov d1,(a0)
-	inc4 a0
-	mov d1,(a0)
-	inc4 a0
-	mov d1,(a0)
-	inc4 a0
-	mov d1,(a0)
-	inc4 a0
-	add -16,a1
-	cmp 15,a1
-	lhi
-.L36:
-	cmp 3,a1
-	bls .L41
-.L37:
-	setlb
-	mov d1,(a0)
-	inc4 a0
-	add -4,a1
-	cmp 3,a1
-	lhi
-#endif
-.L41:
-	cmp 0,a1
-	beq .L47
-.L46:
-	setlb
-	movbu d2,(a0)
-	inc a0
-	sub 1,a1
-	lne
-.L47:
-	mov d3,a0
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _memset,.Lfe1-_memset
diff --git a/newlib/libc/machine/mn10300/setjmp.S b/newlib/libc/machine/mn10300/setjmp.S
deleted file mode 100644
index 144444980..000000000
--- a/newlib/libc/machine/mn10300/setjmp.S
+++ /dev/null
@@ -1,92 +0,0 @@
-	.file "setjmp.S"
-
-	.section .text
-	.align 1
-	.global _setjmp
-#ifdef __AM33__
-#ifdef __AM33_2__
-	.am33_2
-#else
-	.am33
-#endif
-#endif
-_setjmp:
-        mov d0,a0
-        mov d2,(0,a0)
-        mov d3,(4,a0)
-	mov mdr,d1
-	mov d1,(8,a0)
-        mov a2,(12,a0)
-        mov a3,(16,a0)
-	mov sp,a1
-	mov a1,(20,a0)
-#ifdef __AM33__
-	add 24,a0
-	mov r4,(a0+)
-	mov r5,(a0+)
-	mov r6,(a0+)
-	mov r7,(a0+)
-#ifdef __AM33_2__
-	fmov fs4,(a0+)
-	fmov fs5,(a0+)
-	fmov fs6,(a0+)
-	fmov fs7,(a0+)
-	fmov fs8,(a0+)
-	fmov fs9,(a0+)
-	fmov fs10,(a0+)
-	fmov fs11,(a0+)
-	fmov fs12,(a0+)
-	fmov fs13,(a0+)
-	fmov fs14,(a0+)
-	fmov fs15,(a0+)
-	fmov fs16,(a0+)
-	fmov fs17,(a0+)
-	fmov fs18,(a0+)
-	fmov fs19,(a0+)
-#endif
-#endif
-        sub d0,d0
-	rets
-
-	.global _longjmp
-_longjmp:
-	mov d0,a0
-	mov (8,a0),d2
-	mov d2,mdr
-        mov (0,a0),d2
-        mov (4,a0),d3
-        mov (12,a0),a2
-        mov (16,a0),a3
-	mov (20,a0),a1
-	mov a1,sp
-#ifdef __AM33__
-	add 24,a0
-	mov (a0+),r4
-	mov (a0+),r5
-	mov (a0+),r6
-	mov (a0+),r7
-#ifdef __AM33_2__
-	fmov (a0+),fs4
-	fmov (a0+),fs5
-	fmov (a0+),fs6
-	fmov (a0+),fs7
-	fmov (a0+),fs8
-	fmov (a0+),fs9
-	fmov (a0+),fs10
-	fmov (a0+),fs11
-	fmov (a0+),fs12
-	fmov (a0+),fs13
-	fmov (a0+),fs14
-	fmov (a0+),fs15
-	fmov (a0+),fs16
-	fmov (a0+),fs17
-	fmov (a0+),fs18
-	fmov (a0+),fs19
-#endif
-#endif
-	cmp 0,d1
-	bne L1
-	mov 1,d1
-L1: 
-	mov d1,d0
-	retf [],0
diff --git a/newlib/libc/machine/mn10300/strchr.S b/newlib/libc/machine/mn10300/strchr.S
deleted file mode 100644
index aa4799091..000000000
--- a/newlib/libc/machine/mn10300/strchr.S
+++ /dev/null
@@ -1,88 +0,0 @@
-	.file "strchr.S"
-
-	.section .text
-	.global _strchr
-	.type	 _strchr,@function
-_strchr:
-	movm [d2,d3,a2,a3],(sp)
-	add -12,sp
-	mov d0,a1
-	movbu d1,(7,sp)
-#ifndef __OPTIMIZE_SIZE__
-	btst 3,d0
-	bne .L20
-	clr d0
-.L24:
-	setlb
-	mov sp,a2
-	mov d0,d3
-	add d3,a2
-	mov a2,a0
-	add 12,a0
-	movbu (7,sp),d3
-	movbu d3,(-4,a0)
-	inc d0
-	cmp 3,d0
-	lls
-	mov a1,a0
-	mov -16843009,a1
-	mov (a0),d2
-	mov a1,d1
-	add d2,d1
-	mov d2,d0
-	not d0
-	and d0,d1
-	mov -2139062144,d3
-	mov d3,(0,sp)
-	btst -2139062144,d1
-	bne .L27
-	jmp .L38
-.L28:
-	inc4 a0
-	mov (a0),d2
-	mov a1,d1
-	add d2,d1
-	mov d2,d0
-	not d0
-	and d0,d1
-	mov (0,sp),d3
-	and d3,d1
-	bne .L27
-.L38:
-	mov (8,sp),d0
-	xor d2,d0
-	mov a1,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	and d3,d1
-	beq .L28
-.L27:
-	mov a0,a1
-#endif
-.L20:
-	movbu (a1),d0
-	cmp 0,d0
-	beq .L32
-	movbu (7,sp),d1
-.L35:
-	setlb
-	cmp d1,d0
-	beq .L36
-	inc a1
-	movbu (a1),d0
-	cmp 0,d0
-	lne
-.L32:
-	movbu (7,sp),d0
-	movbu (a1),d3
-	cmp d0,d3
-	beq .L36
-	mov 0,a0
-	jmp .L37
-.L36:
-	mov a1,a0
-.L37:
-	ret [d2,d3,a2,a3],28
-.Lfe1:
-	.size	 _strchr,.Lfe1-_strchr
diff --git a/newlib/libc/machine/mn10300/strcmp.S b/newlib/libc/machine/mn10300/strcmp.S
deleted file mode 100644
index 8aee9688a..000000000
--- a/newlib/libc/machine/mn10300/strcmp.S
+++ /dev/null
@@ -1,54 +0,0 @@
-	.file	"strcmp.S"
-
-	.section .text
-	.global _strcmp
-	.type	 _strcmp,@function
-_strcmp:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,a0
-	mov d1,a1
-#ifndef __OPTIMIZE_SIZE__
-	or d1,d0
-	btst 3,d0
-	bne .L11
-	mov (a0),d1
-	mov (a1),d0
-	cmp d0,d1
-	bne .L11
-	mov -16843009,d3
-.L5:
-	setlb
-	mov (a0),d0
-	mov d3,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	and -2139062144,d1
-	beq .L6
-	clr d0
-	jmp .L13
-.L6:
-	inc4 a0
-	inc4 a1
-	mov (a0),d1
-	mov (a1),d0
-	cmp d0,d1
-	leq
-#endif
-.L11:
-	setlb
-	movbu (a1),d2
-	movbu (a0),d0
-	cmp 0,d0
-	beq .L9
-	cmp d2,d0
-	bne .L9
-	inc a0
-	inc a1
-	lra
-.L9:
-	sub d2,d0
-.L13:
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _strcmp,.Lfe1-_strcmp
diff --git a/newlib/libc/machine/mn10300/strcpy.S b/newlib/libc/machine/mn10300/strcpy.S
deleted file mode 100644
index d73d06f33..000000000
--- a/newlib/libc/machine/mn10300/strcpy.S
+++ /dev/null
@@ -1,51 +0,0 @@
-	.file "strcpy.S"
-
-	.section .text
-	.global _strcpy
-	.type	 _strcpy,@function
-_strcpy:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,d3
-	mov d1,a0
-	mov d3,a1
-	mov a0,d0
-#ifndef __OPTIMIZE_SIZE__
-	or d3,d0
-	btst 3,d0
-	bne .L2
-	mov (a0),d0
-	mov -16843009,a2
-	mov a2,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	mov -2139062144,d2
-	btst -2139062144,d1
-	bne .L2
-.L5:
-	setlb
-	mov (a0),d0
-	mov d0,(a1)
-	inc4 a0
-	inc4 a1
-	mov (a0),d0
-	mov a2,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	and d2,d1
-	leq
-#endif
-.L2:
-.L7:
-	setlb
-	movbu (a0),d0
-	movbu d0,(a1)
-	inc a0
-	inc a1
-	cmp 0,d0
-	lne
-	mov d3,a0
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _strcpy,.Lfe1-_strcpy
diff --git a/newlib/libc/machine/mn10300/strlen.S b/newlib/libc/machine/mn10300/strlen.S
deleted file mode 100644
index 91e88dd73..000000000
--- a/newlib/libc/machine/mn10300/strlen.S
+++ /dev/null
@@ -1,44 +0,0 @@
-	.file "strlen.S"
-
-	.section .text
-	.global _strlen
-	.type	 _strlen,@function
-_strlen:
-	movm [d2,d3,a2,a3],(sp)
-	mov d0,a0
-	mov a0,a2
-#ifndef __OPTIMIZE_SIZE__
-	btst 3,d0
-	bne .L21
-	mov (a0),d0
-	mov -16843009,a1
-	mov a1,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	mov -2139062144,d2
-	btst -2139062144,d1
-	bne .L21
-.L15:
-	setlb
-	inc4 a0
-	mov (a0),d0
-	mov a1,d1
-	add d0,d1
-	not d0
-	and d0,d1
-	and d2,d1
-	leq
-	jmp .L21
-#endif
-.L19:
-	inc a0
-.L21:
-	movbu (a0),d3
-	cmp 0,d3
-	bne .L19
-	sub a2,a0
-	mov a0,d0
-	ret [d2,d3,a2,a3],16
-.Lfe1:
-	.size	 _strlen,.Lfe1-_strlen
diff --git a/newlib/libc/machine/necv70/Makefile.am b/newlib/libc/machine/necv70/Makefile.am
deleted file mode 100644
index 18cbcf706..000000000
--- a/newlib/libc/machine/necv70/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = fastmath.s setjmp.s
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/necv70/Makefile.in b/newlib/libc/machine/necv70/Makefile.in
deleted file mode 100644
index 3ae1df4ff..000000000
--- a/newlib/libc/machine/necv70/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = fastmath.s setjmp.s
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  fastmath.o setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/necv70/aclocal.m4 b/newlib/libc/machine/necv70/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/necv70/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/necv70/configure b/newlib/libc/machine/necv70/configure
deleted file mode 100755
index 1a96f2a24..000000000
--- a/newlib/libc/machine/necv70/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=fastmath.s
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/necv70/configure.in b/newlib/libc/machine/necv70/configure.in
deleted file mode 100644
index 1374322ee..000000000
--- a/newlib/libc/machine/necv70/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/necv70 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(fastmath.s)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/necv70/fastmath.s b/newlib/libc/machine/necv70/fastmath.s
deleted file mode 100644
index bccb20f12..000000000
--- a/newlib/libc/machine/necv70/fastmath.s
+++ /dev/null
@@ -1,251 +0,0 @@
-	.globl	_fast_sin
-_fast_sin:
-	fsin.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_sinf
-_fast_sinf:
-	fsin.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_cos
-_fast_cos:
-	fcos.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_cosf
-_fast_cosf:
-	fcos.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_tan
-_fast_tan:
-	ftan.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_tanf
-_fast_tanf:
-	ftan.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-
-	.globl	_fast_fabs
-_fast_fabs:
-	fabs.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_fabsf
-_fast_fabsf:
-	fabs.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_sqrt
-_fast_sqrt:
-	fsqrt.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_sqrtf
-_fast_sqrtf:
-	fsqrt.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_acos
-_fast_acos:
-	facos.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_acosf
-_fast_acosf:
-	facos.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_asin
-_fast_asin:
-	fasin.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_asinf
-_fast_asinf:
-	fasin.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_atan
-_fast_atan:
-	fatan.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_atanf
-_fast_atanf:
-	fatan.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_cosh
-_fast_cosh:
-	fcosh.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_coshf
-_fast_coshf:
-	fcosh.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_sinh
-_fast_sinh:
-	fsin.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_sinhf
-_fast_sinhf:
-	fsin.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_tanh
-_fast_tanh:
-	ftanh.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_tanhf
-_fast_tanhf:
-	ftanh.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_atanh
-_fast_atanh:
-	fatanh.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_atanhf
-_fast_atanhf:
-	fatanh.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-	.globl	_fast_exp2
-_fast_exp2:
-	fexp2.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_exp2f
-_fast_exp2f:
-	fexp2.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_exp10
-_fast_exp10:
-	fexp10.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_exp10f
-_fast_exp10f:
-	fexp10.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_expe
-_fast_expe:
-	fexpe.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_expef
-_fast_expef:
-	fexpe.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_log2
-_fast_log2:
-	flog2.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_log2f
-_fast_log2f:
-	flog2.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-	.globl	_fast_log10
-_fast_log10:
-	flog10.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_log10f
-_fast_log10f:
-	flog10.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_loge
-_fast_loge:
-	floge.l	[ap],[ap]
-	mov.d	[ap],r0
-	ret	#0
-
-
-	.globl	_fast_logef
-_fast_logef:
-	floge.s	[ap],[ap]
-	mov.w	[ap],r0
-	ret	#0
-
-
diff --git a/newlib/libc/machine/necv70/machine/registers.h b/newlib/libc/machine/necv70/machine/registers.h
deleted file mode 100644
index 9f02ed30c..000000000
--- a/newlib/libc/machine/necv70/machine/registers.h
+++ /dev/null
@@ -1,14 +0,0 @@
-
-
-typedef struct 
-{
-  	int fp_rounding:2;	/* fp rounding control 		*/
-  	int integer_rounding:1;	/* integer rounding 		*/
-  	int rfu:1;	        /* reserved			*/
-	int fp_trap:5;   	/* floating point trap bits 	*/
-	int otm:1;	
-	int rfu2:3;
-	int att:3;
-	int rfu3:16;
-} v60_tkcw_type;
-
diff --git a/newlib/libc/machine/necv70/necv70.tex b/newlib/libc/machine/necv70/necv70.tex
deleted file mode 100644
index 9c1530411..000000000
--- a/newlib/libc/machine/necv70/necv70.tex
+++ /dev/null
@@ -1,99 +0,0 @@
-@node machine,,syscalls,Top
-@chapter NEC V70 Specific Functions
-
-The NEC V70 has machine instructions for fast IEEE floating-point
-arithmetic, including operations normally provided by the library.  
-
-When you use the @file{/usr/include/fastmath.h} header file, the
-names of several library math functions are redefined to call the
-@code{fastmath} routine (using the corresponding V70 machine instructions)
-whenever possible.
-
-For example,
-@example
-
-#include <fastmath.h>
-
-double sqsin(x)
-double x;
-@{
-  return sin(x*x);
-@}
-
-@end example
-expands into the code
-@example
-
-@dots{}
-double sqsin(x)
-double x;
-@{
-  return fast_sin(x*x);
-@}
-
-@end example
-
-The library has an entry @code{fast_sin} which uses the machine
-instruction @code{fsin.l} to perform the operation.  Note that the
-built-in instructions cannot call @code{matherr} or set @code{errno}
-in the same way that the C coded functions do.  Refer to a V70
-instruction manual to see how errors are generated and handled.
-
-Also, the library provides true @code{float} entry points.  The
-@code{fast_sinf} entry point really performs a @code{fsin.s}
-operation.  Because of this, the instructions are only useful when
-using code compiled with an ANSI C compiler.  The prototypes
-and definitions for the floating-point versions of the math library
-routines are only defined if compiling a module with an ANSI C
-compiler.
-
-@page
-@section Entry points 
-The functions provided by @file{fastmath.h} are
-@example
-
- double fast_sin(double);	/*	fsin.l */
- double fast_cos(double);	/*	fcos.l */
- double fast_tan(double);	/*	ftan.l */
- double fast_asin(double);	/*	fasin.l */
- double fast_acos(double);	/*	facos.l */
- double fast_atan(double);	/*	fatan.l */
- double fast_sinh(double);	/*	fsinh.l */
- double fast_cosh(double);	/*	fcosh.l */
- double fast_tanh(double);	/*	ftanh.l */
- double fast_asinh(double);	/*	fasinh.l */
- double fast_acosh(double);	/*	facosh.l */
- double fast_atanh(double);	/*	fatanh.l */
- double fast_fabs(double);	/*	fabs.l */
- double fast_sqrt(double);	/*	fsqrt.l */
- double fast_exp2(double);	/*	fexp2.l */
- double fast_exp10(double);	/*	fexp10.l */
- double fast_expe(double);	/*	fexpe.l */
- double fast_log10(double);	/*	flog10.l */
- double fast_log2(double);	/*	flog2.l */
- double fast_loge(double);	/*	floge.l */
-
- float fast_sinf(float);	/*	fsin.s */
- float fast_cosf(float);	/*	fcos.s */
- float fast_tanf(float);	/*	ftan.s */
- float fast_asinf(float);	/*	fasin.s */
- float fast_acosf(float);	/*	facos.s */
- float fast_atanf(float);	/*	fatan.s */
- float fast_sinhf(float);	/*	fsinh.s */
- float fast_coshf(float);	/*	fcosh.s */
- float fast_tanhf(float);	/*	ftanh.s */
- float fast_asinhf(float);	/*	fasinh.s */
- float fast_acoshf(float);	/*	facosh.s */
- float fast_atanhf(float);	/*	fatanh.s */
- float fast_fabsf(float);	/*	fabs.s */
- float fast_sqrtf(float);	/*	fsqrt.s */
- float fast_exp2f(float);	/*	fexp2.s */
- float fast_exp10f(float);	/*	fexp10.s */
- float fast_expef(float);	/*	fexpe.s */
- float fast_log10f(float);	/*	flog10.s */
- float fast_log2f(float);	/*	flog2.s */
- float fast_logef(float);	/*	floge.s */
-
-@end example
-
-
diff --git a/newlib/libc/machine/necv70/setjmp.s b/newlib/libc/machine/necv70/setjmp.s
deleted file mode 100644
index d8aca1dfb..000000000
--- a/newlib/libc/machine/necv70/setjmp.s
+++ /dev/null
@@ -1,33 +0,0 @@
-	.globl	_setjmp
-_setjmp:
-	mov.w	[ap],r0
-	mov.d	r15,[r0+]
-	mov.d	r17,[r0+]
-	mov.d	r19,[r0+]
-	mov.d	r21,[r0+]
-	mov.d	r23,[r0+]
-	mov.w	-0x4[ap],[r0+]
-	mov.w	fp,[r0+]
-	mov.w	ap,[r0+]
-	mov.w	-0x8[ap],[r0]
-	xor.w	r0,r0
-	ret	#0x0
-
-	.globl	_longjmp
-_longjmp:
-	 mov.w	  0x4[ap],r0
-	 mov.w	  [ap],r1
-	 mov.d	  [r1+],r15
-	 mov.d	  [r1+],r17
-	 mov.d	  [r1+],r19
-	 mov.d	  [r1+],r21
-	 mov.d	  [r1+],r23
-	 mov.d	  [r1+],ap
-	 mov.w	  [r1+],sp
-	 test.w	  r0
-	 jne	  noz
-	 mov.w	  #0x1,r0
-noz:	 jmp	  [0x0[r1]]
-
-
-	
diff --git a/newlib/libc/machine/powerpc/Makefile.am b/newlib/libc/machine/powerpc/Makefile.am
deleted file mode 100644
index 917f79e8e..000000000
--- a/newlib/libc/machine/powerpc/Makefile.am
+++ /dev/null
@@ -1,25 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S times.c
-lib_a_LIBADD = @extra_objs@
-EXTRA_lib_a_SOURCES = @extra_sources@
-lib_a_DEPENDENCIES = @extra_objs@
-
-ACLOCAL_AMFLAGS = -I ../../.. 
-AM_CFLAGS = -I $(srcdir)/../../stdio -I $(srcdir)/../../stdlib
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-VEC_MALLOC_COMPILE = $(COMPILE) -DINTERNAL_NEWLIB
-
-vec_reallocr.o: vec_mallocr.c
-	$(VEC_MALLOC_COMPILE) -DDEFINE_VECREALLOC -c $(srcdir)/vec_mallocr.c -o $@
-
-vec_callocr.o: vec_mallocr.c
-	$(VEC_MALLOC_COMPILE) -DDEFINE_VECCALLOC -c $(srcdir)/vec_mallocr.c -o $@
-
diff --git a/newlib/libc/machine/powerpc/Makefile.in b/newlib/libc/machine/powerpc/Makefile.in
deleted file mode 100644
index 5da27f71e..000000000
--- a/newlib/libc/machine/powerpc/Makefile.in
+++ /dev/null
@@ -1,340 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-extra_objs = @extra_objs@
-extra_sources = @extra_sources@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S times.c
-lib_a_LIBADD = @extra_objs@
-EXTRA_lib_a_SOURCES = @extra_sources@
-lib_a_DEPENDENCIES = @extra_objs@
-
-ACLOCAL_AMFLAGS = -I ../../.. 
-AM_CFLAGS = -I $(srcdir)/../../stdio -I $(srcdir)/../../stdlib
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-VEC_MALLOC_COMPILE = $(COMPILE) -DINTERNAL_NEWLIB
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_OBJECTS =  setjmp.o times.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(EXTRA_lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-vec_reallocr.o: vec_mallocr.c
-	$(VEC_MALLOC_COMPILE) -DDEFINE_VECREALLOC -c $(srcdir)/vec_mallocr.c -o $@
-
-vec_callocr.o: vec_mallocr.c
-	$(VEC_MALLOC_COMPILE) -DDEFINE_VECCALLOC -c $(srcdir)/vec_mallocr.c -o $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/powerpc/aclocal.m4 b/newlib/libc/machine/powerpc/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/powerpc/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/powerpc/atosfix16.c b/newlib/libc/machine/powerpc/atosfix16.c
deleted file mode 100644
index 501c0f1cb..000000000
--- a/newlib/libc/machine/powerpc/atosfix16.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-FUNCTION
-   <<atosfix16>>, <<atosfix32>>, <<atosfix64>>---string to signed fixed-point
-
-INDEX
-	atosfix16
-INDEX
-	atosfix32
-INDEX
-	atosfix64
-INDEX
-	_atosfix16_r
-INDEX
-	_atosfix32_r
-INDEX
-	_atosfix64_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        __int16_t atosfix16(const char *<[s]>);
-	__int32_t atosfix32(const char *<[s]>);
-	__int64_t atosfix32(const char *<[s]>);
-
-        __int16_t _atosfix16_r(struct __reent *, const char *<[s]>);
-	__int32_t _atosfix32_r(struct __reent *, const char *<[s]>);
-	__int64_t _atosfix32_r(struct __reent *, const char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	__int16_t atosfix16(<[s]>)
-	const char *<[s]>;
-	
-	__int32_t atosfix32(<[s]>)
-	const char *<[s]>;
-
-	__int64_t atosfix64(<[s]>)
-	const char *<[s]>;
-
-	__int16_t _atosfix16_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-	__int32_t _atosfix32_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-	__int64_t _atosfix64_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-DESCRIPTION
-	<<atosfix16>> converts the initial portion of a string to a sign
-	+ 15-bit fraction fixed point value.
-	<<atosfix32>> converts the initial portion of a string to a sign
-	+ 31-bit fraction fixed point value.
-	<<atosfix64>> converts the initial portion of a string to a sign
-	+ 63-bit fraction fixed point value.
-	<<atosfix16(s)>> is implemented as <<strtosfix16(s, NULL).>>
-	<<atosfix32(s)>> is implemented as <<strtosfix32(s, NULL).>>
-	<<atosfix64(s)>> is implemented as <<strtosfix64(s, NULL).>>
-
-	The alternate functions <<_atosfix16_r>>, <<_atosfix32_r>>,
-	and <<_atosfix64_r>> are reentrant versions.
-	The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-	The functions return the converted value, if any. If no conversion was
-	made, <<0>> is returned.  If saturation occurs, <<ERANGE>> is stored
-	in errno.
-
-PORTABILITY
-	<<atosfix16>>, <<atosfix32>>, and <<atosfix64>> are non-standard.
-
-	No supporting OS subroutines are directly required.  The
-	OS subroutines required by <<strtod>> are used.
-*/
-
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__int16_t
-_DEFUN (_atosfix16_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtosfix16_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__int16_t
-_DEFUN (atosfix16, (s),
-	_CONST char *s)
-{
-  return strtosfix16 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/atosfix32.c b/newlib/libc/machine/powerpc/atosfix32.c
deleted file mode 100644
index dbcac7e2f..000000000
--- a/newlib/libc/machine/powerpc/atosfix32.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__int32_t
-_DEFUN (_atosfix32_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtosfix32_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__int32_t
-_DEFUN (atosfix32, (s),
-	_CONST char *s)
-{
-  return strtosfix32 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/atosfix64.c b/newlib/libc/machine/powerpc/atosfix64.c
deleted file mode 100644
index 109baf7b6..000000000
--- a/newlib/libc/machine/powerpc/atosfix64.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__ 
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__int64_t
-_DEFUN (_atosfix64_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtosfix64_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__int64_t
-_DEFUN (atosfix64, (s),
-	_CONST char *s)
-{
-  return strtosfix64 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/atoufix16.c b/newlib/libc/machine/powerpc/atoufix16.c
deleted file mode 100644
index 53db13764..000000000
--- a/newlib/libc/machine/powerpc/atoufix16.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-FUNCTION
-   <<atoufix16>>, <<atoufix32>>, <<atoufix64>>---string to unsigned fixed-point
-
-INDEX
-	atoufix16
-INDEX
-	atoufix32
-INDEX
-	atoufix64
-INDEX
-	_atoufix16_r
-INDEX
-	_atoufix32_r
-INDEX
-	_atoufix64_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        __uint16_t atoufix16(const char *<[s]>);
-	__uint32_t atoufix32(const char *<[s]>);
-	__uint64_t atoufix32(const char *<[s]>);
-
-        __uint16_t _atoufix16_r(struct __reent *, const char *<[s]>);
-	__uint32_t _atoufix32_r(struct __reent *, const char *<[s]>);
-	__uint64_t _atoufix32_r(struct __reent *, const char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	__uint16_t atoufix16(<[s]>)
-	const char *<[s]>;
-	
-	__uint32_t atoufix32(<[s]>)
-	const char *<[s]>;
-
-	__uint64_t atoufix64(<[s]>)
-	const char *<[s]>;
-
-	__uint16_t _atoufix16_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-	__uint32_t _atoufix32_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-	__uint64_t _atoufix64_r(<reent>, <[s]>)
-	struct _reent *<[reent]>;
-	const char *<[s]>;
-	
-DESCRIPTION
-	<<atoufix16>> converts the initial portion of a string to a
-	16-bit fraction unsigned fixed point value.
-	<<atoufix32>> converts the initial portion of a string to a
-	32-bit fraction unsigned fixed point value.
-	<<atoufix64>> converts the initial portion of a string to a
-	64-bit fraction unsigned fixed point value.
-	<<atoufix16(s)>> is implemented as <<strtoufix16(s, NULL).>>
-	<<atoufix32(s)>> is implemented as <<strtoufix32(s, NULL).>>
-	<<atoufix64(s)>> is implemented as <<strtoufix64(s, NULL).>>
-
-	The alternate functions <<_atoufix16_r>>, <<_atoufix32_r>>,
-	and <<_atoufix64_r>> are reentrant versions.
-	The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-	The functions return the converted value, if any. If no conversion was
-	made, <<0>> is returned.  If saturation occurs, <<ERANGE>> is stored
-	in errno.
-
-PORTABILITY
-	<<atoufix16>>, <<atoufix32>>, and <<atoufix64>> are non-standard.
-
-	No supporting OS subroutines are directly required.  The
-	OS subroutines required by <<strtod>> are used.
-*/
-
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__uint16_t
-_DEFUN (_atoufix16_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtoufix16_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__uint16_t
-_DEFUN (atoufix16, (s),
-	_CONST char *s)
-{
-  return strtoufix16 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/atoufix32.c b/newlib/libc/machine/powerpc/atoufix32.c
deleted file mode 100644
index ee29ac586..000000000
--- a/newlib/libc/machine/powerpc/atoufix32.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__ 
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__uint32_t
-_DEFUN (_atoufix32_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtoufix32_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__uint32_t
-_DEFUN (atoufix32, (s),
-	_CONST char *s)
-{
-  return strtoufix32 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/atoufix64.c b/newlib/libc/machine/powerpc/atoufix64.c
deleted file mode 100644
index e5eefc423..000000000
--- a/newlib/libc/machine/powerpc/atoufix64.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Jeff Johnston - 02/13/2002
- */
-
-#ifdef __SPE__
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-__uint64_t
-_DEFUN (_atoufix64_r, (reent, s),
-	struct _reent *reent _AND
-	_CONST char *s)
-{
-  return _strtoufix64_r (reent, s, NULL);
-}
-
-#ifndef _REENT_ONLY
-__uint64_t
-_DEFUN (atoufix64, (s),
-	_CONST char *s)
-{
-  return strtoufix64 (s, NULL);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/configure b/newlib/libc/machine/powerpc/configure
deleted file mode 100755
index 8740e26e3..000000000
--- a/newlib/libc/machine/powerpc/configure
+++ /dev/null
@@ -1,1905 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-extra_objs=
-extra_sources=
-case $host in
-  powerpc*-*altivec*)
-	extra_objs="vfprintf.o vfscanf.o vec_malloc.o vec_calloc.o vec_free.o vec_realloc.o vec_reallocr.o vec_callocr.o"
-	extra_sources="vfprintf.c vfscanf.c vec_malloc.c vec_calloc.c vec_free.c vec_realloc.c vec_mallocr.c"
-	;;
-  powerpc*-*spe*)
-	extra_objs="atosfix16.o atosfix32.o atosfix64.o atoufix16.o atoufix32.o atoufix64.o simdldtoa.o strtosfix16.o strtosfix32.o strtosfix64.o strtoufix16.o strtoufix32.o strtoufix64.o ufix64toa.o vfprintf.o vfscanf.o"
-	extra_sources="atosfix16.c atosfix32.c atosfix64.c atoufix16.c atoufix32.c atoufix64.c simdldtoa.c strtosfix16.c strtosfix32.c strtosfix64.c strtoufix16.c strtoufix32.c strtoufix64.c ufix64toa.c vfprintf.c vfscanf.c"
-	;;
-esac
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@extra_objs@%$extra_objs%g
-s%@extra_sources@%$extra_sources%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/powerpc/configure.in b/newlib/libc/machine/powerpc/configure.in
deleted file mode 100644
index b1c4734ca..000000000
--- a/newlib/libc/machine/powerpc/configure.in
+++ /dev/null
@@ -1,27 +0,0 @@
-dnl This is the newlib/libc/machine/powerpc configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-extra_objs=
-extra_sources=
-case $host in
-  powerpc*-*altivec*)
-	extra_objs="vfprintf.o vfscanf.o vec_malloc.o vec_calloc.o vec_free.o vec_realloc.o vec_reallocr.o vec_callocr.o"
-	extra_sources="vfprintf.c vfscanf.c vec_malloc.c vec_calloc.c vec_free.c vec_realloc.c vec_mallocr.c"
-	;;
-  powerpc*-*spe*)
-	extra_objs="atosfix16.o atosfix32.o atosfix64.o atoufix16.o atoufix32.o atoufix64.o simdldtoa.o strtosfix16.o strtosfix32.o strtosfix64.o strtoufix16.o strtoufix32.o strtoufix64.o ufix64toa.o vfprintf.o vfscanf.o"
-	extra_sources="atosfix16.c atosfix32.c atosfix64.c atoufix16.c atoufix32.c atoufix64.c simdldtoa.c strtosfix16.c strtosfix32.c strtosfix64.c strtoufix16.c strtoufix32.c strtoufix64.c ufix64toa.c vfprintf.c vfscanf.c"
-	;;
-esac
-AC_SUBST(extra_objs)
-AC_SUBST(extra_sources)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/powerpc/fix64.h b/newlib/libc/machine/powerpc/fix64.h
deleted file mode 100644
index ce9482091..000000000
--- a/newlib/libc/machine/powerpc/fix64.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _FIX64_H_
-
-#define _FIX64_H_
-
-#include <ieeefp.h>
-#include <math.h>
-#include <float.h>
-#include <errno.h>
-#include <sys/config.h>
-
-#ifdef __IEEE_LITTLE_ENDIAN
-#define IEEE_8087
-#endif
-
-#ifdef __IEEE_BIG_ENDIAN
-#define IEEE_MC68k
-#endif
-
-#ifdef __Z8000__
-#define Just_16
-#endif
-
-#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1
-Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined.
-#endif
-
-union long_double_union
-{
-  long double ld;
-  __uint32_t i[4];
-};
-
-typedef union long_double_union LONG_DOUBLE_UNION;
-
-extern void _simdstrtold (char *, char **, LONG_DOUBLE_UNION *);
-extern int  _simdldcheck (LONG_DOUBLE_UNION *);
-
-#define SIMD_LDBL_MANT_DIG 113
-
-#ifdef IEEE_8087
-# define word0(x) (x.i[3])
-# define word1(x) (x.i[2])
-# define word2(x) (x.i[1])
-# define word3(x) (x.i[0])
-#else /* !IEEE_8087 */
-# define word0(x) (x.i[0])
-# define word1(x) (x.i[1])
-# define word2(x) (x.i[2])
-# define word3(x) (x.i[3])
-#endif /* !IEEE_8087 */
-
-#undef  Exp_shift
-#define Exp_shift   16
-#undef  Exp_mask
-#define Exp_mask    ((__uint32_t)0x7fff0000L)
-#undef  Exp_msk1
-#define Exp_msk1    ((__uint32_t)0x00010000L)
-#undef  Bias
-#define Bias 	     16383
-#undef  Ebits
-#define Ebits 	     15
-#undef  Sign_bit
-#define Sign_bit    ((__uint32_t)0x80000000L)
-#define init(x) {} 
-
-union fix64_union
-{
-  __uint64_t ll;
-  __uint32_t j[2];
-};
-
-#ifdef __LITTLE_ENDIAN__
-# define hiword(y) (y.j[1])
-# define loword(y) (y.j[0])
-#else /* __BIG_ENDIAN__ */
-# define hiword(y) (y.j[0])
-# define loword(y) (y.j[1])
-#endif /* __BIG_ENDIAN__ */
-
-#endif /* _FIX64_H_ */
diff --git a/newlib/libc/machine/powerpc/machine/malloc.h b/newlib/libc/machine/powerpc/machine/malloc.h
deleted file mode 100644
index 945a9651a..000000000
--- a/newlib/libc/machine/powerpc/machine/malloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef	_MACHMALLOC_H_
-#define	_MACHMALLOC_H_
-
-# if defined(__ALTIVEC__)
-
-_PTR    _EXFUN(vec_calloc,(size_t __nmemb, size_t __size));
-_PTR    _EXFUN(_vec_calloc_r,(struct _reent *, size_t __nmemb, size_t __size));
-_VOID   _EXFUN(vec_free,(_PTR));
-#define _vec_freer _freer
-_PTR    _EXFUN(vec_malloc,(size_t __size));
-#define _vec_mallocr _memalign_r
-_PTR    _EXFUN(vec_realloc,(_PTR __r, size_t __size));
-_PTR    _EXFUN(_vec_realloc_r,(struct _reent *, _PTR __r, size_t __size));
-
-# endif /* __ALTIVEC__ */
-
-
-#endif	/* _MACHMALLOC_H_ */
-
-
diff --git a/newlib/libc/machine/powerpc/machine/stdlib.h b/newlib/libc/machine/powerpc/machine/stdlib.h
deleted file mode 100644
index 1cf18371a..000000000
--- a/newlib/libc/machine/powerpc/machine/stdlib.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef	_MACHSTDLIB_H_
-#define	_MACHSTDLIB_H_
-
-#ifndef __STRICT_ANSI__
-
-# if defined(__ALTIVEC__)
-
-_PTR    _EXFUN(vec_calloc,(size_t __nmemb, size_t __size));
-_PTR    _EXFUN(_vec_calloc_r,(struct _reent *, size_t __nmemb, size_t __size));
-_VOID   _EXFUN(vec_free,(_PTR));
-#define _vec_freer _freer
-_PTR    _EXFUN(vec_malloc,(size_t __size));
-#define _vec_mallocr _memalign_r
-_PTR    _EXFUN(vec_realloc,(_PTR __r, size_t __size));
-_PTR    _EXFUN(_vec_realloc_r,(struct _reent *, _PTR __r, size_t __size));
-
-# endif /* __ALTIVEC__ */
-
-# if defined(__SPE__)
-
-#define __need_inttypes
-#include <sys/types.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-__int16_t   _EXFUN(atosfix16,(const char *__str));
-__int16_t   _EXFUN(_atosfix16_r,(struct _reent *, const char *__str));
-__int32_t   _EXFUN(atosfix32,(const char *__str));
-__int32_t   _EXFUN(_atosfix32_r,(struct _reent *, const char *__str));
-__int64_t   _EXFUN(atosfix64,(const char *__str));
-__int64_t   _EXFUN(_atosfix64_r,(struct _reent *, const char *__str));
-
-__uint16_t _EXFUN(atoufix16,(const char *__str));
-__uint16_t _EXFUN(_atoufix16_r,(struct _reent *, const char *__str));
-__uint32_t _EXFUN(atoufix32,(const char *__str));
-__uint32_t _EXFUN(_atoufix32_r,(struct _reent *, const char *__str));
-__uint64_t _EXFUN(atoufix64,(const char *__str));
-__uint64_t _EXFUN(_atoufix64_r,(struct _reent *, const char *__str));
-
-__int16_t   _EXFUN(strtosfix16,(const char *__str, char **__endptr));
-__int16_t   _EXFUN(_strtosfix16_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-__int32_t   _EXFUN(strtosfix32,(const char *__str, char **__endptr));
-__int32_t   _EXFUN(_strtosfix32_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-__int64_t   _EXFUN(strtosfix64,(const char *__str, char **__endptr));
-__int64_t   _EXFUN(_strtosfix64_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-
-__uint16_t _EXFUN(strtoufix16,(const char *__str, char **__endptr));
-__uint16_t _EXFUN(_strtoufix16_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-__uint32_t _EXFUN(strtoufix32,(const char *__str, char **__endptr));
-__uint32_t _EXFUN(_strtoufix32_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-__uint64_t _EXFUN(strtoufix64,(const char *__str, char **__endptr));
-__uint64_t _EXFUN(_strtoufix64_r,(struct _reent *, const char *__str, 
-                 char **__endptr));
-#ifdef __cplusplus
-}
-#endif
-
-# endif /* __SPE__ */
-
-#endif /* !__STRICT_ANSI__ */
-
-
-#endif	/* _MACHSTDLIB_H_ */
-
-
diff --git a/newlib/libc/machine/powerpc/setjmp.S b/newlib/libc/machine/powerpc/setjmp.S
deleted file mode 100644
index ec3a443d7..000000000
--- a/newlib/libc/machine/powerpc/setjmp.S
+++ /dev/null
@@ -1,190 +0,0 @@
-/* This is a simple version of setjmp and longjmp for the PowerPC.
-   Ian Lance Taylor, Cygnus Support, 9 Feb 1994.  
-   Modified by Jeff Johnston, Red Hat Inc. 2 Oct 2001. */
-
-#include "ppc-asm.h"
-
-FUNC_START(setjmp)
-#ifdef __ALTIVEC__
-	addi	3,3,15		# align Altivec to 16 byte boundary
-	rlwinm	3,3,0,0,27
-#else
-	addi	3,3,7		# align to 8 byte boundary
-	rlwinm	3,3,0,0,28
-#endif
-	stw	1,0(3)		# offset 0
-	stwu	2,4(3)		# offset 4
-	stwu	13,4(3)		# offset 8
-	stwu	14,4(3)		# offset 12
-	stwu	15,4(3)		# offset 16
-	stwu	16,4(3)		# offset 20
-	stwu	17,4(3)		# offset 24
-	stwu	18,4(3)		# offset 28
-	stwu	19,4(3)		# offset 32
-	stwu	20,4(3)		# offset 36
-	stwu	21,4(3)		# offset 40
-	stwu	22,4(3)		# offset 44
-	stwu	23,4(3)		# offset 48
-	stwu	24,4(3)		# offset 52
-	stwu	25,4(3)		# offset 56
-	stwu	26,4(3)		# offset 60
-	stwu	27,4(3)		# offset 64
-	stwu	28,4(3)		# offset 68
-	stwu	29,4(3)		# offset 72
-	stwu	30,4(3)		# offset 76
-	stwu	31,4(3)		# offset 80
-	mflr	4
-	stwu	4,4(3)		# offset 84
-	mfcr	4
-	stwu	4,4(3)		# offset 88
-				# one word pad to get floating point aligned on 8 byte boundary
-#ifndef _SOFT_FLOAT
-	stfdu	14,8(3)		# offset 96
-	stfdu	15,8(3)		# offset 104
-	stfdu	16,8(3)		# offset 112
-	stfdu	17,8(3)		# offset 120
-	stfdu	18,8(3)		# offset 128
-	stfdu	19,8(3)		# offset 136
-	stfdu	20,8(3)		# offset 144
-	stfdu	21,8(3)		# offset 152
-	stfdu	22,8(3)		# offset 160
-	stfdu	23,8(3)		# offset 168
-	stfdu	24,8(3)		# offset 176
-	stfdu	25,8(3)		# offset 184
-	stfdu	26,8(3)		# offset 192
-	stfdu	27,8(3)		# offset 200
-	stfdu	28,8(3)		# offset 208
-	stfdu	29,8(3)		# offset 216
-	stfdu	30,8(3)		# offset 224
-	stfdu	31,8(3)		# offset 232
-#endif
-
-	/* This requires a total of 21 * 4 + 18 * 8 + 4 + 4 + 4
-	   bytes == 60 * 4 bytes == 240 bytes.  */
-
-#ifdef __ALTIVEC__
-	/* save Altivec vrsave and vr20-vr31 registers */
-	mfspr	4,256		# vrsave register
-	stwu	4,16(3)		# offset 248
-	addi	3,3,8
-	stvx	20,0,3		# offset 256
-	addi	3,3,16
-	stvx	21,0,3		# offset 272
-	addi	3,3,16
-	stvx	22,0,3		# offset 288
-	addi	3,3,16
-	stvx	23,0,3		# offset 304
-	addi	3,3,16
-	stvx	24,0,3		# offset 320
-	addi	3,3,16
-	stvx	25,0,3		# offset 336
-	addi	3,3,16
-	stvx	26,0,3		# offset 352
-	addi	3,3,16
-	stvx	27,0,3		# offset 368
-	addi	3,3,16
-	stvx	28,0,3		# offset 384
-	addi	3,3,16
-	stvx	29,0,3		# offset 400
-	addi	3,3,16
-	stvx	30,0,3		# offset 416
-	addi	3,3,16
-	stvx	31,0,3		# offset 432
-
-	/* This requires a total of 240 + 8 + 8 + 12 * 16 == 448 bytes. */
-#endif
-	li	3,0
-	blr
-FUNC_END(setjmp)
-
-
-FUNC_START(longjmp)
-#ifdef __ALTIVEC__
-	addi	3,3,15		# align Altivec to 16 byte boundary
-	rlwinm	3,3,0,0,27
-#else
-	addi	3,3,7		# align to 8 byte boundary
-	rlwinm	3,3,0,0,28
-#endif
-	lwz	1,0(3)		# offset 0 
-	lwzu	2,4(3)		# offset 4 
-	lwzu	13,4(3)		# offset 8 
-	lwzu	14,4(3)		# offset 12
-	lwzu	15,4(3)		# offset 16
-	lwzu	16,4(3)		# offset 20
-	lwzu	17,4(3)		# offset 24
-	lwzu	18,4(3)		# offset 28
-	lwzu	19,4(3)		# offset 32
-	lwzu	20,4(3)		# offset 36
-	lwzu	21,4(3)		# offset 40
-	lwzu	22,4(3)		# offset 44
-	lwzu	23,4(3)		# offset 48
-	lwzu	24,4(3)		# offset 52
-	lwzu	25,4(3)		# offset 56
-	lwzu	26,4(3)		# offset 60
-	lwzu	27,4(3)		# offset 64
-	lwzu	28,4(3)		# offset 68
-	lwzu	29,4(3)		# offset 72
-	lwzu	30,4(3)		# offset 76
-	lwzu	31,4(3)		# offset 80
-	lwzu	5,4(3)		# offset 84
-	mtlr	5
-	lwzu	5,4(3)		# offset 88
-	mtcrf	255,5
-				# one word pad to get floating point aligned on 8 byte boundary
-#ifndef _SOFT_FLOAT
-	lfdu	14,8(3)         # offset 96 
-	lfdu	15,8(3)         # offset 104
-	lfdu	16,8(3)         # offset 112
-	lfdu	17,8(3)         # offset 120
-	lfdu	18,8(3)         # offset 128
-	lfdu	19,8(3)         # offset 136
-	lfdu	20,8(3)         # offset 144
-	lfdu	21,8(3)         # offset 152
-	lfdu	22,8(3)         # offset 160
-	lfdu	23,8(3)         # offset 168
-	lfdu	24,8(3)         # offset 176
-	lfdu	25,8(3)         # offset 184
-	lfdu	26,8(3)         # offset 192
-	lfdu	27,8(3)         # offset 200
-	lfdu	28,8(3)         # offset 208
-	lfdu	29,8(3)         # offset 216
-	lfdu	30,8(3)         # offset 224
-	lfdu	31,8(3)         # offset 232
-#endif
-
-#ifdef __ALTIVEC__
-	/* restore Altivec vrsave and v20-v31 registers */
-	lwzu	5,16(3)		# offset 248
-	mtspr	256,5		# vrsave
-	addi	3,3,8
-	lvx	20,0,3		# offset 256
-	addi	3,3,16
-	lvx	21,0,3		# offset 272
-	addi	3,3,16
-	lvx	22,0,3		# offset 288
-	addi	3,3,16
-	lvx	23,0,3		# offset 304
-	addi	3,3,16
-	lvx	24,0,3		# offset 320
-	addi	3,3,16
-	lvx	25,0,3		# offset 336
-	addi	3,3,16
-	lvx	26,0,3		# offset 352
-	addi	3,3,16
-	lvx	27,0,3		# offset 368
-	addi	3,3,16
-	lvx	28,0,3		# offset 384
-	addi	3,3,16
-	lvx	29,0,3		# offset 400
-	addi	3,3,16
-	lvx	30,0,3		# offset 416
-	addi	3,3,16
-	lvx	31,0,3		# offset 432
-#endif
-
-	mr.	3,4
-	bclr+	4,2
-	li	3,1
-	blr
-FUNC_END(longjmp)
diff --git a/newlib/libc/machine/powerpc/simdldtoa.c b/newlib/libc/machine/powerpc/simdldtoa.c
deleted file mode 100644
index 9a90e64e2..000000000
--- a/newlib/libc/machine/powerpc/simdldtoa.c
+++ /dev/null
@@ -1,3722 +0,0 @@
-
- /* Extended precision arithmetic functions for long double I/O.
-  * This program has been placed in the public domain.
-  */
-
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <reent.h>
-#include <string.h>
-#include <stdlib.h>
-#include "mprec.h"
-#include "fix64.h"
-
-/* These are the externally visible entries. */
-/* linux name:  long double _IO_strtold (char *, char **); */
-void _simdstrtold (char *, char **, LONG_DOUBLE_UNION *);
-char * _simdldtoa_r (struct _reent *, LONG_DOUBLE_UNION *, int, int, int *, int *, char **);
-
- /* Number of 16 bit words in external x type format */
- #define NE 10
-
- /* Number of 16 bit words in internal format */
- #define NI (NE+3)
-
- /* Array offset to exponent */
- #define E 1
-
- /* Array offset to high guard word */
- #define M 2
-
- /* Number of bits of precision */
- #define NBITS ((NI-4)*16)
-
- /* Maximum number of decimal digits in ASCII conversion
-  * = NBITS*log10(2)
-  */
- #define NDEC (NBITS*8/27)
-
- /* The exponent of 1.0 */
- #define EXONE (0x3fff)
-
- /* Maximum exponent digits - base 10 */
- #define MAX_EXP_DIGITS 5
-
-/* Control structure for long doublue conversion including rounding precision values.
- * rndprc can be set to 80 (if NE=6), 64, 56, 53, or 24 bits.
- */
-typedef struct
-{
-  int rlast;
-  int rndprc;
-  int rw;
-  int re;
-  int outexpon;
-  unsigned short rmsk;
-  unsigned short rmbit;
-  unsigned short rebit;
-  unsigned short rbit[NI];
-  unsigned short equot[NI];
-} LDPARMS;
-
-static void esub(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static void emul(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static void ediv(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static int ecmp(short unsigned int *a, short unsigned int *b);
-static int enormlz(short unsigned int *x);
-static int eshift(short unsigned int *x, int sc);
-static void eshup1(register short unsigned int *x);
-static void eshup8(register short unsigned int *x);
-static void eshup6(register short unsigned int *x);
-static void eshdn1(register short unsigned int *x);
-static void eshdn8(register short unsigned int *x);
-static void eshdn6(register short unsigned int *x);
-static void eneg(short unsigned int *x);
-static void emov(register short unsigned int *a, register short unsigned int *b);
-static void eclear(register short unsigned int *x);
-static void einfin(register short unsigned int *x, register LDPARMS *ldp);
-static void efloor(short unsigned int *x, short unsigned int *y, LDPARMS *ldp);
-static void etoasc(short unsigned int *x, char *string, int ndigs, int outformat, LDPARMS *ldp);
-
-#if SIMD_LDBL_MANT_DIG == 24
-static void e24toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#elif SIMD_LDBL_MANT_DIG == 53
-static void e53toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#elif SIMD_LDBL_MANT_DIG == 64
-static void e64toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#else
-static void e113toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#endif
-
-/*							econst.c	*/
-/*  e type constants used by high precision check routines */
-
-#if NE == 10
-/* 0.0 */
-static unsigned short ezero[NE] =
- {0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,};
-
-/* 1.0E0 */
-static unsigned short eone[NE] =
- {0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x3fff,};
-
-#else
-
-/* 0.0 */
-static unsigned short ezero[NE] = {
-0, 0000000,0000000,0000000,0000000,0000000,};
-/* 1.0E0 */
-static unsigned short eone[NE] = {
-0, 0000000,0000000,0000000,0100000,0x3fff,};
-
-#endif
-
-/* Debugging routine for displaying errors */
-#ifdef DEBUG
-/* Notice: the order of appearance of the following
- * messages is bound to the error codes defined
- * in mconf.h.
- */
-static char *ermsg[7] = {
-"unknown",      /* error code 0 */
-"domain",       /* error code 1 */
-"singularity",  /* et seq.      */
-"overflow",
-"underflow",
-"total loss of precision",
-"partial loss of precision"
-};
-#define mtherr(name, code) printf( "\n%s %s error\n", name, ermsg[code] );
-#else
-#define mtherr(name, code)
-#endif
-
-/*							ieee.c
- *
- *    Extended precision IEEE binary floating point arithmetic routines
- *
- * Numbers are stored in C language as arrays of 16-bit unsigned
- * short integers.  The arguments of the routines are pointers to
- * the arrays.
- *
- *
- * External e type data structure, simulates Intel 8087 chip
- * temporary real format but possibly with a larger significand:
- *
- *	NE-1 significand words	(least significant word first,
- *				 most significant bit is normally set)
- *	exponent		(value = EXONE for 1.0,
- *				top bit is the sign)
- *
- *
- * Internal data structure of a number (a "word" is 16 bits):
- *
- * ei[0]	sign word	(0 for positive, 0xffff for negative)
- * ei[1]	biased exponent	(value = EXONE for the number 1.0)
- * ei[2]	high guard word	(always zero after normalization)
- * ei[3]
- * to ei[NI-2]	significand	(NI-4 significand words,
- *				 most significant word first,
- *				 most significant bit is set)
- * ei[NI-1]	low guard word	(0x8000 bit is rounding place)
- *
- *
- *
- *		Routines for external format numbers
- *
- *	asctoe( string, e )	ASCII string to extended double e type
- *	asctoe64( string, &d )	ASCII string to long double
- *	asctoe53( string, &d )	ASCII string to double
- *	asctoe24( string, &f )	ASCII string to single
- *	asctoeg( string, e, prec, ldp ) ASCII string to specified precision
- *	e24toe( &f, e, ldp )	IEEE single precision to e type
- *	e53toe( &d, e, ldp )	IEEE double precision to e type
- *	e64toe( &d, e, ldp )	IEEE long double precision to e type
- *	e113toe( &d, e, ldp )	IEEE long double precision to e type
- *	eabs(e)			absolute value
- *	eadd( a, b, c )		c = b + a
- *	eclear(e)		e = 0
- *	ecmp (a, b)		Returns 1 if a > b, 0 if a == b,
- *				-1 if a < b, -2 if either a or b is a NaN.
- *	ediv( a, b, c, ldp )	c = b / a
- *	efloor( a, b, ldp )	truncate to integer, toward -infinity
- *	efrexp( a, exp, s )	extract exponent and significand
- *	eifrac( e, &l, frac )   e to long integer and e type fraction
- *	euifrac( e, &l, frac )  e to unsigned long integer and e type fraction
- *	einfin( e, ldp )	set e to infinity, leaving its sign alone
- *	eldexp( a, n, b )	multiply by 2**n
- *	emov( a, b )		b = a
- *	emul( a, b, c, ldp )	c = b * a
- *	eneg(e)			e = -e
- *	eround( a, b )		b = nearest integer value to a
- *	esub( a, b, c, ldp )	c = b - a
- *	e24toasc( &f, str, n )	single to ASCII string, n digits after decimal
- *	e53toasc( &d, str, n )	double to ASCII string, n digits after decimal
- *	e64toasc( &d, str, n )	long double to ASCII string
- *	etoasc(e,str,n,fmt,ldp)e to ASCII string, n digits after decimal
- *	etoe24( e, &f )		convert e type to IEEE single precision
- *	etoe53( e, &d )		convert e type to IEEE double precision
- *	etoe64( e, &d )		convert e type to IEEE long double precision
- *	ltoe( &l, e )		long (32 bit) integer to e type
- *	ultoe( &l, e )		unsigned long (32 bit) integer to e type
- *      eisneg( e )             1 if sign bit of e != 0, else 0
- *      eisinf( e )             1 if e has maximum exponent (non-IEEE)
- *				or is infinite (IEEE)
- *      eisnan( e )             1 if e is a NaN
- *	esqrt( a, b )		b = square root of a
- *
- *
- *		Routines for internal format numbers
- *
- *	eaddm( ai, bi )		add significands, bi = bi + ai
- *	ecleaz(ei)		ei = 0
- *	ecleazs(ei)		set ei = 0 but leave its sign alone
- *	ecmpm( ai, bi )		compare significands, return 1, 0, or -1
- *	edivm( ai, bi, ldp )	divide  significands, bi = bi / ai
- *	emdnorm(ai,l,s,exp,ldp) normalize and round off
- *	emovi( a, ai )		convert external a to internal ai
- *	emovo( ai, a, ldp )	convert internal ai to external a
- *	emovz( ai, bi )		bi = ai, low guard word of bi = 0
- *	emulm( ai, bi, ldp )	multiply significands, bi = bi * ai
- *	enormlz(ei)		left-justify the significand
- *	eshdn1( ai )		shift significand and guards down 1 bit
- *	eshdn8( ai )		shift down 8 bits
- *	eshdn6( ai )		shift down 16 bits
- *	eshift( ai, n )		shift ai n bits up (or down if n < 0)
- *	eshup1( ai )		shift significand and guards up 1 bit
- *	eshup8( ai )		shift up 8 bits
- *	eshup6( ai )		shift up 16 bits
- *	esubm( ai, bi )		subtract significands, bi = bi - ai
- *
- *
- * The result is always normalized and rounded to NI-4 word precision
- * after each arithmetic operation.
- *
- * Exception flags are NOT fully supported.
- *
- * Define INFINITY in mconf.h for support of infinity; otherwise a
- * saturation arithmetic is implemented.
- *
- * Define NANS for support of Not-a-Number items; otherwise the
- * arithmetic will never produce a NaN output, and might be confused
- * by a NaN input.
- * If NaN's are supported, the output of ecmp(a,b) is -2 if
- * either a or b is a NaN. This means asking if(ecmp(a,b) < 0)
- * may not be legitimate. Use if(ecmp(a,b) == -1) for less-than
- * if in doubt.
- * Signaling NaN's are NOT supported; they are treated the same
- * as quiet NaN's.
- *
- * Denormals are always supported here where appropriate (e.g., not
- * for conversion to DEC numbers).
- */
-
-/*
- * Revision history:
- *
- *  5 Jan 84	PDP-11 assembly language version
- *  6 Dec 86	C language version
- * 30 Aug 88	100 digit version, improved rounding
- * 15 May 92    80-bit long double support
- * 22 Nov 00    Revised to fit into newlib by Jeff Johnston <jjohnstn@redhat.com>
- *
- * Author:  S. L. Moshier.
- *
- * Copyright (c) 1984,2000 S.L. Moshier
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR,  THE AUTHOR MAKES NO REPRESENTATION
- * OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
- * SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- */
-
-#include <stdio.h>
-/* #include "\usr\include\stdio.h" */
-/*#include "ehead.h"*/
-/*#include "mconf.h"*/
-/*							mconf.h
- *
- *	Common include file for math routines
- *
- *
- *
- * SYNOPSIS:
- *
- * #include "mconf.h"
- *
- *
- *
- * DESCRIPTION:
- *
- * This file contains definitions for error codes that are
- * passed to the common error handling routine mtherr()
- * (which see).
- *
- * The file also includes a conditional assembly definition
- * for the type of computer arithmetic (IEEE, DEC, Motorola
- * IEEE, or UNKnown).
- *
- * For Digital Equipment PDP-11 and VAX computers, certain
- * IBM systems, and others that use numbers with a 56-bit
- * significand, the symbol DEC should be defined.  In this
- * mode, most floating point constants are given as arrays
- * of octal integers to eliminate decimal to binary conversion
- * errors that might be introduced by the compiler.
- *
- * For computers, such as IBM PC, that follow the IEEE 
- * Standard for Binary Floating Point Arithmetic (ANSI/IEEE
- * Std 754-1985), the symbol IBMPC should be defined.  These
- * numbers have 53-bit significands.  In this mode, constants
- * are provided as arrays of hexadecimal 16 bit integers.
- *
- * To accommodate other types of computer arithmetic, all
- * constants are also provided in a normal decimal radix
- * which one can hope are correctly converted to a suitable
- * format by the available C language compiler.  To invoke
- * this mode, the symbol UNK is defined.
- *
- * An important difference among these modes is a predefined
- * set of machine arithmetic constants for each.  The numbers
- * MACHEP (the machine roundoff error), MAXNUM (largest number
- * represented), and several other parameters are preset by
- * the configuration symbol.  Check the file const.c to
- * ensure that these values are correct for your computer.
- *
- * For ANSI C compatibility, define ANSIC equal to 1.  Currently
- * this affects only the atan2() function and others that use it.
- */
-
-/* Constant definitions for math error conditions
- */
-
-#define DOMAIN		1	/* argument domain error */
-#define SING		2	/* argument singularity */
-#define OVERFLOW	3	/* overflow range error */
-#define UNDERFLOW	4	/* underflow range error */
-#define TLOSS		5	/* total loss of precision */
-#define PLOSS		6	/* partial loss of precision */
-
-#define EDOM		33
-#define ERANGE		34
-
-typedef struct
-	{
-	double r;
-	double i;
-	}cmplx;
-
-/* Type of computer arithmetic */
-
-#ifndef DEC
-#ifdef __IEEE_LITTLE_ENDIAN
-#define IBMPC 1
-#else  /* !__IEEE_LITTLE_ENDIAN */
-#define MIEEE 1
-#endif /* !__IEEE_LITTLE_ENDIAN */
-#endif /* !DEC */
-
-/* Define 1 for ANSI C atan2() function
- * See atan.c and clog.c.
- */
-#define ANSIC 1
-
-/*define VOLATILE volatile*/
-#define VOLATILE 
-
-#define NANS
-#define INFINITY
-
-/* NaN's require infinity support. */
-#ifdef NANS
-#ifndef INFINITY
-#define INFINITY
-#endif
-#endif
-
-/* This handles 64-bit long ints. */
-#define LONGBITS (8 * sizeof(long))
-
-
-static void eaddm(short unsigned int *x, short unsigned int *y);
-static void esubm(short unsigned int *x, short unsigned int *y);
-static void emdnorm(short unsigned int *s, int lost, int subflg, long int exp, int rcntrl, LDPARMS *ldp);
-static int  asctoeg(char *ss, short unsigned int *y, int oprec, LDPARMS *ldp);
-static void enan(short unsigned int *nan, int size);
-#if SIMD_LDBL_MANT_DIG == 24
-static void toe24(short unsigned int *x, short unsigned int *y);
-#elif SIMD_LDBL_MANT_DIG == 53
-static void toe53(short unsigned int *x, short unsigned int *y);
-#elif SIMD_LDBL_MANT_DIG == 64
-static void toe64(short unsigned int *a, short unsigned int *b);
-#else
-static void toe113(short unsigned int *a, short unsigned int *b);
-#endif
-static void eiremain(short unsigned int *den, short unsigned int *num, LDPARMS *ldp);
-static int ecmpm(register short unsigned int *a, register short unsigned int *b);
-static int edivm(short unsigned int *den, short unsigned int *num, LDPARMS *ldp);
-static int emulm(short unsigned int *a, short unsigned int *b, LDPARMS *ldp);
-static int eisneg(short unsigned int *x);
-static int eisinf(short unsigned int *x);
-static void emovi(short unsigned int *a, short unsigned int *b);
-static void emovo(short unsigned int *a, short unsigned int *b, LDPARMS *ldp);
-static void emovz(register short unsigned int *a, register short unsigned int *b);
-static void ecleaz(register short unsigned int *xi);
-static void eadd1(short unsigned int *a, short unsigned int *b, short unsigned int *c, int subflg, LDPARMS *ldp);
-static int eisnan(short unsigned int *x);
-static int eiisnan(short unsigned int *x);
-
-#ifdef DEC
-static void etodec(), todec(), dectoe();
-#endif
-
-/*
-; Clear out entire external format number.
-;
-; unsigned short x[];
-; eclear( x );
-*/
-
-static void eclear(register short unsigned int *x)
-{
-register int i;
-
-for( i=0; i<NE; i++ )
-	*x++ = 0;
-}
-
-
-
-/* Move external format number from a to b.
- *
- * emov( a, b );
- */
-
-static void emov(register short unsigned int *a, register short unsigned int *b)
-{
-register int i;
-
-for( i=0; i<NE; i++ )
-	*b++ = *a++;
-}
-
-
-/*
-;	Negate external format number
-;
-;	unsigned short x[NE];
-;	eneg( x );
-*/
-
-static void eneg(short unsigned int *x)
-{
-
-#ifdef NANS
-if( eisnan(x) )
-	return;
-#endif
-x[NE-1] ^= 0x8000; /* Toggle the sign bit */
-}
-
-
-
-/* Return 1 if external format number is negative,
- * else return zero.
- */
-static int eisneg(short unsigned int *x)
-{
-
-#ifdef NANS
-if( eisnan(x) )
-	return( 0 );
-#endif
-if( x[NE-1] & 0x8000 )
-	return( 1 );
-else
-	return( 0 );
-}
-
-
-/* Return 1 if external format number has maximum possible exponent,
- * else return zero.
- */
-static int eisinf(short unsigned int *x)
-{
-
-if( (x[NE-1] & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(x) )
-		return( 0 );
-#endif
-	return( 1 );
-	}
-else
-	return( 0 );
-}
-
-/* Check if e-type number is not a number.
- */
-static int eisnan(short unsigned int *x)
-{
-
-#ifdef NANS
-int i;
-/* NaN has maximum exponent */
-if( (x[NE-1] & 0x7fff) != 0x7fff )
-	return (0);
-/* ... and non-zero significand field. */
-for( i=0; i<NE-1; i++ )
-	{
-	if( *x++ != 0 )
-		return (1);
-	}
-#endif
-return (0);
-}
-
-/*
-; Fill entire number, including exponent and significand, with
-; largest possible number.  These programs implement a saturation
-; value that is an ordinary, legal number.  A special value
-; "infinity" may also be implemented; this would require tests
-; for that value and implementation of special rules for arithmetic
-; operations involving inifinity.
-*/
-
-static void einfin(register short unsigned int *x, register LDPARMS *ldp)
-{
-register int i;
-
-#ifdef INFINITY
-for( i=0; i<NE-1; i++ )
-	*x++ = 0;
-*x |= 32767;
-ldp = ldp;
-#else
-for( i=0; i<NE-1; i++ )
-	*x++ = 0xffff;
-*x |= 32766;
-if( ldp->rndprc < NBITS )
-	{
-	if (ldp->rndprc == 113)
-		{
-		*(x - 9) = 0;
-		*(x - 8) = 0;
-		}
-	if( ldp->rndprc == 64 )
-		{
-		*(x-5) = 0;
-		}
-	if( ldp->rndprc == 53 )
-		{
-		*(x-4) = 0xf800;
-		}
-	else
-		{
-		*(x-4) = 0;
-		*(x-3) = 0;
-		*(x-2) = 0xff00;
-		}
-	}
-#endif
-}
-
-/* Move in external format number,
- * converting it to internal format.
- */
-static void emovi(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-int i;
-
-q = b;
-p = a + (NE-1);	/* point to last word of external number */
-/* get the sign bit */
-if( *p & 0x8000 )
-	*q++ = 0xffff;
-else
-	*q++ = 0;
-/* get the exponent */
-*q = *p--;
-*q++ &= 0x7fff;	/* delete the sign bit */
-#ifdef INFINITY
-if( (*(q-1) & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(a) )
-		{
-		*q++ = 0;
-		for( i=3; i<NI; i++ )
-			*q++ = *p--;
-		return;
-		}
-#endif
-	for( i=2; i<NI; i++ )
-		*q++ = 0;
-	return;
-	}
-#endif
-/* clear high guard word */
-*q++ = 0;
-/* move in the significand */
-for( i=0; i<NE-1; i++ )
-	*q++ = *p--;
-/* clear low guard word */
-*q = 0;
-}
-
-
-/* Move internal format number out,
- * converting it to external format.
- */
-static void emovo(short unsigned int *a, short unsigned int *b, LDPARMS *ldp)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-p = a;
-q = b + (NE-1); /* point to output exponent */
-/* combine sign and exponent */
-i = *p++;
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#ifdef INFINITY
-if( *(p-1) == 0x7fff )
-	{
-#ifdef NANS
-	if( eiisnan(a) )
-		{
-		enan( b, NBITS );
-		return;
-		}
-#endif
-	einfin(b, ldp);
-	return;
-	}
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-for( i=0; i<NE-1; i++ )
-	*q-- = *p++;
-}
-
-
-/* Clear out internal format number.
- */
-
-static void ecleaz(register short unsigned int *xi)
-{
-register int i;
-
-for( i=0; i<NI; i++ )
-	*xi++ = 0;
-}
-
-/* same, but don't touch the sign. */
-
-static void ecleazs(register short unsigned int *xi)
-{
-register int i;
-
-++xi;
-for(i=0; i<NI-1; i++)
-	*xi++ = 0;
-}
-
-
-
-
-/* Move internal format number from a to b.
- */
-static void emovz(register short unsigned int *a, register short unsigned int *b)
-{
-register int i;
-
-for( i=0; i<NI-1; i++ )
-	*b++ = *a++;
-/* clear low guard word */
-*b = 0;
-}
-
-/* Return nonzero if internal format number is a NaN.
- */
-
-static int eiisnan (short unsigned int *x)
-{
-int i;
-
-if( (x[E] & 0x7fff) == 0x7fff )
-	{
-	for( i=M+1; i<NI; i++ )
-		{
-		if( x[i] != 0 )
-			return(1);
-		}
-	}
-return(0);
-}
-
-#if SIMD_LDBL_MANT_DIG == 64
-
-/* Return nonzero if internal format number is infinite. */
-static int 
-eiisinf (x)
-     unsigned short x[];
-{
-
-#ifdef NANS
-  if (eiisnan (x))
-    return (0);
-#endif
-  if ((x[E] & 0x7fff) == 0x7fff)
-    return (1);
-  return (0);
-}
-#endif /* SIMD_LDBL_MANT_DIG == 64 */
-
-/*
-;	Compare significands of numbers in internal format.
-;	Guard words are included in the comparison.
-;
-;	unsigned short a[NI], b[NI];
-;	cmpm( a, b );
-;
-;	for the significands:
-;	returns	+1 if a > b
-;		 0 if a == b
-;		-1 if a < b
-*/
-static int ecmpm(register short unsigned int *a, register short unsigned int *b)
-{
-int i;
-
-a += M; /* skip up to significand area */
-b += M;
-for( i=M; i<NI; i++ )
-	{
-	if( *a++ != *b++ )
-		goto difrnt;
-	}
-return(0);
-
-difrnt:
-if( *(--a) > *(--b) )
-	return(1);
-else
-	return(-1);
-}
-
-
-/*
-;	Shift significand down by 1 bit
-*/
-
-static void eshdn1(register short unsigned int *x)
-{
-register unsigned short bits;
-int i;
-
-x += M;	/* point to significand area */
-
-bits = 0;
-for( i=M; i<NI; i++ )
-	{
-	if( *x & 1 )
-		bits |= 1;
-	*x >>= 1;
-	if( bits & 2 )
-		*x |= 0x8000;
-	bits <<= 1;
-	++x;
-	}	
-}
-
-
-
-/*
-;	Shift significand up by 1 bit
-*/
-
-static void eshup1(register short unsigned int *x)
-{
-register unsigned short bits;
-int i;
-
-x += NI-1;
-bits = 0;
-
-for( i=M; i<NI; i++ )
-	{
-	if( *x & 0x8000 )
-		bits |= 1;
-	*x <<= 1;
-	if( bits & 2 )
-		*x |= 1;
-	bits <<= 1;
-	--x;
-	}
-}
-
-
-
-/*
-;	Shift significand down by 8 bits
-*/
-
-static void eshdn8(register short unsigned int *x)
-{
-register unsigned short newbyt, oldbyt;
-int i;
-
-x += M;
-oldbyt = 0;
-for( i=M; i<NI; i++ )
-	{
-	newbyt = *x << 8;
-	*x >>= 8;
-	*x |= oldbyt;
-	oldbyt = newbyt;
-	++x;
-	}
-}
-
-/*
-;	Shift significand up by 8 bits
-*/
-
-static void eshup8(register short unsigned int *x)
-{
-int i;
-register unsigned short newbyt, oldbyt;
-
-x += NI-1;
-oldbyt = 0;
-
-for( i=M; i<NI; i++ )
-	{
-	newbyt = *x >> 8;
-	*x <<= 8;
-	*x |= oldbyt;
-	oldbyt = newbyt;
-	--x;
-	}
-}
-
-/*
-;	Shift significand up by 16 bits
-*/
-
-static void eshup6(register short unsigned int *x)
-{
-int i;
-register unsigned short *p;
-
-p = x + M;
-x += M + 1;
-
-for( i=M; i<NI-1; i++ )
-	*p++ = *x++;
-
-*p = 0;
-}
-
-/*
-;	Shift significand down by 16 bits
-*/
-
-static void eshdn6(register short unsigned int *x)
-{
-int i;
-register unsigned short *p;
-
-x += NI-1;
-p = x + 1;
-
-for( i=M; i<NI-1; i++ )
-	*(--p) = *(--x);
-
-*(--p) = 0;
-}
-
-/*
-;	Add significands
-;	x + y replaces y
-*/
-
-static void eaddm(short unsigned int *x, short unsigned int *y)
-{
-register unsigned long a;
-int i;
-unsigned int carry;
-
-x += NI-1;
-y += NI-1;
-carry = 0;
-for( i=M; i<NI; i++ )
-	{
-	a = (unsigned long )(*x) + (unsigned long )(*y) + carry;
-	if( a & 0x10000 )
-		carry = 1;
-	else
-		carry = 0;
-	*y = (unsigned short )a;
-	--x;
-	--y;
-	}
-}
-
-/*
-;	Subtract significands
-;	y - x replaces y
-*/
-
-static void esubm(short unsigned int *x, short unsigned int *y)
-{
-unsigned long a;
-int i;
-unsigned int carry;
-
-x += NI-1;
-y += NI-1;
-carry = 0;
-for( i=M; i<NI; i++ )
-	{
-	a = (unsigned long )(*y) - (unsigned long )(*x) - carry;
-	if( a & 0x10000 )
-		carry = 1;
-	else
-		carry = 0;
-	*y = (unsigned short )a;
-	--x;
-	--y;
-	}
-}
-
-
-/* Divide significands */
-
-
-/* Multiply significand of e-type number b
-by 16-bit quantity a, e-type result to c. */
-
-static void m16m(short unsigned int a, short unsigned int *b, short unsigned int *c)
-{
-register unsigned short *pp;
-register unsigned long carry;
-unsigned short *ps;
-unsigned short p[NI];
-unsigned long aa, m;
-int i;
-
-aa = a;
-pp = &p[NI-2];
-*pp++ = 0;
-*pp = 0;
-ps = &b[NI-1];
-
-for( i=M+1; i<NI; i++ )
-	{
-	if( *ps == 0 )
-		{
-		--ps;
-		--pp;
-		*(pp-1) = 0;
-		}
-	else
-		{
-		m = (unsigned long) aa * *ps--;
-		carry = (m & 0xffff) + *pp;
-		*pp-- = (unsigned short )carry;
-		carry = (carry >> 16) + (m >> 16) + *pp;
-		*pp = (unsigned short )carry;
-		*(pp-1) = carry >> 16;
-		}
-	}
-for( i=M; i<NI; i++ )
-	c[i] = p[i];
-}
-
-
-/* Divide significands. Neither the numerator nor the denominator
-is permitted to have its high guard word nonzero.  */
-
-
-static int edivm(short unsigned int *den, short unsigned int *num, LDPARMS *ldp)
-{
-int i;
-register unsigned short *p;
-unsigned long tnum;
-unsigned short j, tdenm, tquot;
-unsigned short tprod[NI+1];
-unsigned short *equot = ldp->equot;
-
-p = &equot[0];
-*p++ = num[0];
-*p++ = num[1];
-
-for( i=M; i<NI; i++ )
-	{
-	*p++ = 0;
-	}
-eshdn1( num );
-tdenm = den[M+1];
-for( i=M; i<NI; i++ )
-	{
-	/* Find trial quotient digit (the radix is 65536). */
-	tnum = (((unsigned long) num[M]) << 16) + num[M+1];
-
-	/* Do not execute the divide instruction if it will overflow. */
-        if( (tdenm * 0xffffUL) < tnum )
-		tquot = 0xffff;
-	else
-		tquot = tnum / tdenm;
-
-		/* Prove that the divide worked. */
-/*
-	tcheck = (unsigned long )tquot * tdenm;
-	if( tnum - tcheck > tdenm )
-		tquot = 0xffff;
-*/
-	/* Multiply denominator by trial quotient digit. */
-	m16m( tquot, den, tprod );
-	/* The quotient digit may have been overestimated. */
-	if( ecmpm( tprod, num ) > 0 )
-		{
-		tquot -= 1;
-		esubm( den, tprod );
-		if( ecmpm( tprod, num ) > 0 )
-			{
-			tquot -= 1;
-			esubm( den, tprod );
-			}
-		}
-/*
-	if( ecmpm( tprod, num ) > 0 )
-		{
-		eshow( "tprod", tprod );
-		eshow( "num  ", num );
-		printf( "tnum = %08lx, tden = %04x, tquot = %04x\n",
-			 tnum, den[M+1], tquot );
-		}
-*/
-	esubm( tprod, num );
-/*
-	if( ecmpm( num, den ) >= 0 )
-		{
-		eshow( "num  ", num );
-		eshow( "den  ", den );
-		printf( "tnum = %08lx, tden = %04x, tquot = %04x\n",
-			 tnum, den[M+1], tquot );
-		}
-*/
-	equot[i] = tquot;
-	eshup6(num);
-	}
-/* test for nonzero remainder after roundoff bit */
-p = &num[M];
-j = 0;
-for( i=M; i<NI; i++ )
-	{
-	j |= *p++;
-	}
-if( j )
-	j = 1;
-
-for( i=0; i<NI; i++ )
-	num[i] = equot[i];
-
-return( (int )j );
-}
-
-
-
-/* Multiply significands */
-static int emulm(short unsigned int *a, short unsigned int *b, LDPARMS *ldp) 
-{
-unsigned short *p, *q;
-unsigned short pprod[NI];
-unsigned short j;
-int i;
-unsigned short *equot = ldp->equot;
-
-equot[0] = b[0];
-equot[1] = b[1];
-for( i=M; i<NI; i++ )
-	equot[i] = 0;
-
-j = 0;
-p = &a[NI-1];
-q = &equot[NI-1];
-for( i=M+1; i<NI; i++ )
-	{
-	if( *p == 0 )
-		{
-		--p;
-		}
-	else
-		{
-		m16m( *p--, b, pprod );
-		eaddm(pprod, equot);
-		}
-	j |= *q;
-	eshdn6(equot);
-	}
-
-for( i=0; i<NI; i++ )
-	b[i] = equot[i];
-
-/* return flag for lost nonzero bits */
-return( (int)j );
-}
-
-
-/*
-static void eshow(str, x)
-char *str;
-unsigned short *x;
-{
-int i;
-
-printf( "%s ", str );
-for( i=0; i<NI; i++ )
-	printf( "%04x ", *x++ );
-printf( "\n" );
-}
-*/
-
-
-/*
- * Normalize and round off.
- *
- * The internal format number to be rounded is "s".
- * Input "lost" indicates whether the number is exact.
- * This is the so-called sticky bit.
- *
- * Input "subflg" indicates whether the number was obtained
- * by a subtraction operation.  In that case if lost is nonzero
- * then the number is slightly smaller than indicated.
- *
- * Input "exp" is the biased exponent, which may be negative.
- * the exponent field of "s" is ignored but is replaced by
- * "exp" as adjusted by normalization and rounding.
- *
- * Input "rcntrl" is the rounding control.
- */
-
-
-static void emdnorm(short unsigned int *s, int lost, int subflg, long int exp, int rcntrl, LDPARMS *ldp)
-{
-int i, j;
-unsigned short r;
-
-/* Normalize */
-j = enormlz( s );
-
-/* a blank significand could mean either zero or infinity. */
-#ifndef INFINITY
-if( j > NBITS )
-	{
-	ecleazs( s );
-	return;
-	}
-#endif
-exp -= j;
-#ifndef INFINITY
-if( exp >= 32767L )
-	goto overf;
-#else
-if( (j > NBITS) && (exp < 32767L) )
-	{
-	ecleazs( s );
-	return;
-	}
-#endif
-if( exp < 0L )
-	{
-	if( exp > (long )(-NBITS-1) )
-		{
-		j = (int )exp;
-		i = eshift( s, j );
-		if( i )
-			lost = 1;
-		}
-	else
-		{
-		ecleazs( s );
-		return;
-		}
-	}
-/* Round off, unless told not to by rcntrl. */
-if( rcntrl == 0 )
-	goto mdfin;
-/* Set up rounding parameters if the control register changed. */
-if( ldp->rndprc != ldp->rlast )
-	{
-	ecleaz( ldp->rbit );
-	switch( ldp->rndprc )
-		{
-		default:
-		case NBITS:
-			ldp->rw = NI-1; /* low guard word */
-			ldp->rmsk = 0xffff;
-			ldp->rmbit = 0x8000;
-			ldp->rebit = 1;
-			ldp->re = ldp->rw - 1;
-			break;
-		case 113:
-			ldp->rw = 10;
-			ldp->rmsk = 0x7fff;
-			ldp->rmbit = 0x4000;
-			ldp->rebit = 0x8000;
-			ldp->re = ldp->rw;
-			break;
-		case 64:
-			ldp->rw = 7;
-			ldp->rmsk = 0xffff;
-			ldp->rmbit = 0x8000;
-			ldp->rebit = 1;
-			ldp->re = ldp->rw-1;
-			break;
-/* For DEC arithmetic */
-		case 56:
-			ldp->rw = 6;
-			ldp->rmsk = 0xff;
-			ldp->rmbit = 0x80;
-			ldp->rebit = 0x100;
-			ldp->re = ldp->rw;
-			break;
-		case 53:
-			ldp->rw = 6;
-			ldp->rmsk = 0x7ff;
-			ldp->rmbit = 0x0400;
-			ldp->rebit = 0x800;
-			ldp->re = ldp->rw;
-			break;
-		case 24:
-			ldp->rw = 4;
-			ldp->rmsk = 0xff;
-			ldp->rmbit = 0x80;
-			ldp->rebit = 0x100;
-			ldp->re = ldp->rw;
-			break;
-		}
-	ldp->rbit[ldp->re] = ldp->rebit;
-	ldp->rlast = ldp->rndprc;
-	}
-
-/* Shift down 1 temporarily if the data structure has an implied
- * most significant bit and the number is denormal.
- * For rndprc = 64 or NBITS, there is no implied bit.
- * But Intel long double denormals lose one bit of significance even so.
- */
-#if IBMPC
-if( (exp <= 0) && (ldp->rndprc != NBITS) )
-#else
-if( (exp <= 0) && (ldp->rndprc != 64) && (ldp->rndprc != NBITS) )
-#endif
-	{
-	lost |= s[NI-1] & 1;
-	eshdn1(s);
-	}
-/* Clear out all bits below the rounding bit,
- * remembering in r if any were nonzero.
- */
-r = s[ldp->rw] & ldp->rmsk;
-if( ldp->rndprc < NBITS )
-	{
-	i = ldp->rw + 1;
-	while( i < NI )
-		{
-		if( s[i] )
-			r |= 1;
-		s[i] = 0;
-		++i;
-		}
-	}
-s[ldp->rw] &= ~ldp->rmsk;
-if( (r & ldp->rmbit) != 0 )
-	{
-	if( r == ldp->rmbit )
-		{
-		if( lost == 0 )
-			{ /* round to even */
-			if( (s[ldp->re] & ldp->rebit) == 0 )
-				goto mddone;
-			}
-		else
-			{
-			if( subflg != 0 )
-				goto mddone;
-			}
-		}
-	eaddm( ldp->rbit, s );
-	}
-mddone:
-#if IBMPC
-if( (exp <= 0) && (ldp->rndprc != NBITS) )
-#else
-if( (exp <= 0) && (ldp->rndprc != 64) && (ldp->rndprc != NBITS) )
-#endif
-	{
-	eshup1(s);
-	}
-if( s[2] != 0 )
-	{ /* overflow on roundoff */
-	eshdn1(s);
-	exp += 1;
-	}
-mdfin:
-s[NI-1] = 0;
-if( exp >= 32767L )
-	{
-#ifndef INFINITY
-overf:
-#endif
-#ifdef INFINITY
-	s[1] = 32767;
-	for( i=2; i<NI-1; i++ )
-		s[i] = 0;
-#else
-	s[1] = 32766;
-	s[2] = 0;
-	for( i=M+1; i<NI-1; i++ )
-		s[i] = 0xffff;
-	s[NI-1] = 0;
-	if( (ldp->rndprc < 64) || (ldp->rndprc == 113) )
-		{
-		s[ldp->rw] &= ~ldp->rmsk;
-		if( ldp->rndprc == 24 )
-			{
-			s[5] = 0;
-			s[6] = 0;
-			}
-		}
-#endif
-	return;
-	}
-if( exp < 0 )
-	s[1] = 0;
-else
-	s[1] = (unsigned short )exp;
-}
-
-
-
-/*
-;	Subtract external format numbers.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp;
-;	esub( a, b, c, ldp );	 c = b - a
-*/
-
-static void esub(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-
-#ifdef NANS
-if( eisnan(a) )
-	{
-	emov (a, c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Infinity minus infinity is a NaN.
- * Test for subtracting infinities of the same sign.
- */
-if( eisinf(a) && eisinf(b) && ((eisneg (a) ^ eisneg (b)) == 0))
-	{
-	mtherr( "esub", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-eadd1( a, b, c, 1, ldp );
-}
-
-
-
-static void eadd1(short unsigned int *a, short unsigned int *b, short unsigned int *c, int subflg, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI], ci[NI];
-int i, lost, j, k;
-long lt, lta, ltb;
-
-#ifdef INFINITY
-if( eisinf(a) )
-	{
-	emov(a,c);
-	if( subflg )
-		eneg(c);
-	return;
-	}
-if( eisinf(b) )
-	{
-	emov(b,c);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-if( subflg )
-	ai[0] = ~ai[0];
-
-/* compare exponents */
-lta = ai[E];
-ltb = bi[E];
-lt = lta - ltb;
-if( lt > 0L )
-	{	/* put the larger number in bi */
-	emovz( bi, ci );
-	emovz( ai, bi );
-	emovz( ci, ai );
-	ltb = bi[E];
-	lt = -lt;
-	}
-lost = 0;
-if( lt != 0L )
-	{
-	if( lt < (long )(-NBITS-1) )
-		goto done;	/* answer same as larger addend */
-	k = (int )lt;
-	lost = eshift( ai, k ); /* shift the smaller number down */
-	}
-else
-	{
-/* exponents were the same, so must compare significands */
-	i = ecmpm( ai, bi );
-	if( i == 0 )
-		{ /* the numbers are identical in magnitude */
-		/* if different signs, result is zero */
-		if( ai[0] != bi[0] )
-			{
-			eclear(c);
-			return;
-			}
-		/* if same sign, result is double */
-		/* double denomalized tiny number */
-		if( (bi[E] == 0) && ((bi[3] & 0x8000) == 0) )
-			{
-			eshup1( bi );
-			goto done;
-			}
-		/* add 1 to exponent unless both are zero! */
-		for( j=1; j<NI-1; j++ )
-			{
-			if( bi[j] != 0 )
-				{
-/* This could overflow, but let emovo take care of that. */
-				ltb += 1;
-				break;
-				}
-			}
-		bi[E] = (unsigned short )ltb;
-		goto done;
-		}
-	if( i > 0 )
-		{	/* put the larger number in bi */
-		emovz( bi, ci );
-		emovz( ai, bi );
-		emovz( ci, ai );
-		}
-	}
-if( ai[0] == bi[0] )
-	{
-	eaddm( ai, bi );
-	subflg = 0;
-	}
-else
-	{
-	esubm( ai, bi );
-	subflg = 1;
-	}
-emdnorm( bi, lost, subflg, ltb, 64, ldp );
-
-done:
-emovo( bi, c, ldp );
-}
-
-
-
-/*
-;	Divide.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp;
-;	ediv( a, b, c, ldp );	c = b / a
-*/
-static void ediv(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI];
-int i;
-long lt, lta, ltb;
-
-#ifdef NANS
-/* Return any NaN input. */
-if( eisnan(a) )
-	{
-	emov(a,c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Zero over zero, or infinity over infinity, is a NaN. */
-if( ((ecmp(a,ezero) == 0) && (ecmp(b,ezero) == 0))
-	|| (eisinf (a) && eisinf (b)) )
-	{
-	mtherr( "ediv", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-/* Infinity over anything else is infinity. */
-#ifdef INFINITY
-if( eisinf(b) )
-	{
-	if( eisneg(a) ^ eisneg(b) )
-		*(c+(NE-1)) = 0x8000;
-	else
-		*(c+(NE-1)) = 0;
-	einfin(c, ldp);
-	return;
-	}
-if( eisinf(a) )
-	{
-	eclear(c);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-lta = ai[E];
-ltb = bi[E];
-if( bi[E] == 0 )
-	{ /* See if numerator is zero. */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( bi[i] != 0 )
-			{
-			ltb -= enormlz( bi );
-			goto dnzro1;
-			}
-		}
-	eclear(c);
-	return;
-	}
-dnzro1:
-
-if( ai[E] == 0 )
-	{	/* possible divide by zero */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			{
-			lta -= enormlz( ai );
-			goto dnzro2;
-			}
-		}
-	if( ai[0] == bi[0] )
-		*(c+(NE-1)) = 0;
-	else
-		*(c+(NE-1)) = 0x8000;
-	einfin(c, ldp);
-	mtherr( "ediv", SING );
-	return;
-	}
-dnzro2:
-
-i = edivm( ai, bi, ldp );
-/* calculate exponent */
-lt = ltb - lta + EXONE;
-emdnorm( bi, i, 0, lt, 64, ldp );
-/* set the sign */
-if( ai[0] == bi[0] )
-	bi[0] = 0;
-else
-	bi[0] = 0Xffff;
-emovo( bi, c, ldp );
-}
-
-
-
-/*
-;	Multiply.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp
-;	emul( a, b, c, ldp );	c = b * a
-*/
-static void emul(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI];
-int i, j;
-long lt, lta, ltb;
-
-#ifdef NANS
-/* NaN times anything is the same NaN. */
-if( eisnan(a) )
-	{
-	emov(a,c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Zero times infinity is a NaN. */
-if( (eisinf(a) && (ecmp(b,ezero) == 0))
-	|| (eisinf(b) && (ecmp(a,ezero) == 0)) )
-	{
-	mtherr( "emul", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-/* Infinity times anything else is infinity. */
-#ifdef INFINITY
-if( eisinf(a) || eisinf(b) )
-	{
-	if( eisneg(a) ^ eisneg(b) )
-		*(c+(NE-1)) = 0x8000;
-	else
-		*(c+(NE-1)) = 0;
-	einfin(c, ldp);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-lta = ai[E];
-ltb = bi[E];
-if( ai[E] == 0 )
-	{
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			{
-			lta -= enormlz( ai );
-			goto mnzer1;
-			}
-		}
-	eclear(c);
-	return;
-	}
-mnzer1:
-
-if( bi[E] == 0 )
-	{
-	for( i=1; i<NI-1; i++ )
-		{
-		if( bi[i] != 0 )
-			{
-			ltb -= enormlz( bi );
-			goto mnzer2;
-			}
-		}
-	eclear(c);
-	return;
-	}
-mnzer2:
-
-/* Multiply significands */
-j = emulm( ai, bi, ldp );
-/* calculate exponent */
-lt = lta + ltb - (EXONE - 1);
-emdnorm( bi, j, 0, lt, 64, ldp );
-/* calculate sign of product */
-if( ai[0] == bi[0] )
-	bi[0] = 0;
-else
-	bi[0] = 0xffff;
-emovo( bi, c, ldp );
-}
-
-
-
-#if SIMD_LDBL_MANT_DIG > 64
-static void e113toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-register unsigned short r;
-unsigned short *e, *p;
-unsigned short yy[NI];
-int denorm, i;
-
-e = pe;
-denorm = 0;
-ecleaz(yy);
-#ifdef IBMPC
-e += 7;
-#endif
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-r &= 0x7fff;
-#ifdef INFINITY
-if( r == 0x7fff )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	for( i=0; i<7; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#else  /* !IBMPC */
-	for( i=1; i<8; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif /* !IBMPC */
-#endif /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( *e & 0x8000 )
-		eneg(y);
-	return;
-	}
-#endif  /* INFINITY */
-yy[E] = r;
-p = &yy[M + 1];
-#ifdef IBMPC
-for( i=0; i<7; i++ )
-	*p++ = *(--e);
-#else  /* IBMPC */
-++e;
-for( i=0; i<7; i++ )
-	*p++ = *e++;
-#endif /* IBMPC */ 
-/* If denormal, remove the implied bit; else shift down 1. */
-if( r == 0 )
-	{
-	yy[M] = 0;
-	}
-else
-	{
-	yy[M] = 1;
-	eshift( yy, -1 );
-	}
-emovo(yy,y,ldp);
-}
-
-/* move out internal format to ieee long double */
-static void toe113(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-#ifdef NANS
-if( eiisnan(a) )
-	{
-	enan( b, 113 );
-	return;
-	}
-#endif
-p = a;
-#ifdef MIEEE
-q = b;
-#else
-q = b + 7;			/* point to output exponent */
-#endif
-
-/* If not denormal, delete the implied bit. */
-if( a[E] != 0 )
-	{
-	eshup1 (a);
-	}
-/* combine sign and exponent */
-i = *p++;
-#ifdef MIEEE
-if( i )
-	*q++ = *p++ | 0x8000;
-else
-	*q++ = *p++;
-#else
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-#ifdef MIEEE
-for (i = 0; i < 7; i++)
-	*q++ = *p++;
-#else
-for (i = 0; i < 7; i++)
-	*q-- = *p++;
-#endif
-}
-#endif /* SIMD_LDBL_MANT_DIG > 64 */
-
-
-#if SIMD_LDBL_MANT_DIG == 64
-static void e64toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-unsigned short yy[NI];
-unsigned short *p, *q, *e;
-int i;
-
-e = pe;
-p = yy;
-
-for( i=0; i<NE-5; i++ )
-	*p++ = 0;
-#ifdef IBMPC
-for( i=0; i<5; i++ )
-	*p++ = *e++;
-#endif
-#ifdef DEC
-for( i=0; i<5; i++ )
-	*p++ = *e++;
-#endif
-#ifdef MIEEE
-p = &yy[0] + (NE-1);
-*p-- = *e++;
-++e;  /* MIEEE skips over 2nd short */
-for( i=0; i<4; i++ )
-	*p-- = *e++;
-#endif
-
-#ifdef IBMPC
-/* For Intel long double, shift denormal significand up 1
-   -- but only if the top significand bit is zero.  */
-if((yy[NE-1] & 0x7fff) == 0 && (yy[NE-2] & 0x8000) == 0)
-  {
-    unsigned short temp[NI+1];
-    emovi(yy, temp);
-    eshup1(temp);
-    emovo(temp,y,ldp);
-    return;
-  }
-#endif
-#ifdef INFINITY
-/* Point to the exponent field.  */
-p = &yy[NE-1];
-if( *p == 0x7fff )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	for( i=0; i<4; i++ )
-		{
-		if((i != 3 && pe[i] != 0)
-		   /* Check for Intel long double infinity pattern.  */
-		   || (i == 3 && pe[i] != 0x8000))
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif
-#ifdef MIEEE
-	for( i=2; i<=5; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif
-#endif /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( *p & 0x8000 )
-		eneg(y);
-	return;
-	}
-#endif /* INFINITY */
-p = yy;
-q = y;
-for( i=0; i<NE; i++ )
-	*q++ = *p++;
-}
-
-/* move out internal format to ieee long double */
-static void toe64(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-#ifdef NANS
-if( eiisnan(a) )
-	{
-	enan( b, 64 );
-	return;
-	}
-#endif
-#ifdef IBMPC
-/* Shift Intel denormal significand down 1.  */
-if( a[E] == 0 )
-  eshdn1(a);
-#endif
-p = a;
-#ifdef MIEEE
-q = b;
-#else
-q = b + 4; /* point to output exponent */
-/* NOTE: Intel data type is 96 bits wide, clear the last word here. */
-*(q+1)= 0;
-#endif
-
-/* combine sign and exponent */
-i = *p++;
-#ifdef MIEEE
-if( i )
-	*q++ = *p++ | 0x8000;
-else
-	*q++ = *p++;
-*q++ = 0; /* leave 2nd short blank */
-#else
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-#ifdef MIEEE
-for( i=0; i<4; i++ )
-	*q++ = *p++;
-#else
-#ifdef INFINITY
-#ifdef IBMPC
-if (eiisinf (a))
-        {
-	/* Intel long double infinity.  */
-	*q-- = 0x8000;
-	*q-- = 0;
-	*q-- = 0;
-	*q = 0;
-	return;
-	}
-#endif /* IBMPC */
-#endif /* INFINITY */
-for( i=0; i<4; i++ )
-	*q-- = *p++;
-#endif
-}
-
-#endif /* SIMD_LDBL_MANT_DIG == 64 */
-
-#if SIMD_LDBL_MANT_DIG == 53
-/*
-; Convert IEEE double precision to e type
-;	double d;
-;	unsigned short x[N+2];
-;	e53toe( &d, x );
-*/
-static void e53toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-#ifdef DEC
-
-dectoe( pe, y ); /* see etodec.c */
-
-#else
-
-register unsigned short r;
-register unsigned short *p, *e;
-unsigned short yy[NI];
-int denorm, k;
-
-e = pe;
-denorm = 0;	/* flag if denormalized number */
-ecleaz(yy);
-#ifdef IBMPC
-e += 3;
-#endif
-#ifdef DEC
-e += 3;
-#endif 
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-yy[M] = (r & 0x0f) | 0x10;
-r &= ~0x800f;	/* strip sign and 4 significand bits */
-#ifdef INFINITY
-if( r == 0x7ff0 )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	if( ((pe[3] & 0xf) != 0) || (pe[2] != 0)
-		|| (pe[1] != 0) || (pe[0] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#else  /* !IBMPC */
-	if( ((pe[0] & 0xf) != 0) || (pe[1] != 0)
-		 || (pe[2] != 0) || (pe[3] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#endif /* !IBMPC */
-#endif  /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( yy[0] )
-		eneg(y);
-	return;
-	}
-#endif
-r >>= 4;
-/* If zero exponent, then the significand is denormalized.
- * So, take back the understood high significand bit. */ 
-if( r == 0 )
-	{
-	denorm = 1;
-	yy[M] &= ~0x10;
-	}
-r += EXONE - 01777;
-yy[E] = r;
-p = &yy[M+1];
-#ifdef IBMPC
-*p++ = *(--e);
-*p++ = *(--e);
-*p++ = *(--e);
-#else  /* !IBMPC */
-++e;
-*p++ = *e++;
-*p++ = *e++;
-*p++ = *e++;
-#endif /* !IBMPC */
-(void )eshift( yy, -5 );
-if( denorm )
-	{ /* if zero exponent, then normalize the significand */
-	if( (k = enormlz(yy)) > NBITS )
-		ecleazs(yy);
-	else
-		yy[E] -= (unsigned short )(k-1);
-	}
-emovo( yy, y, ldp );
-#endif /* !DEC */
-}
-
-/*
-; e type to IEEE double precision
-;	double d;
-;	unsigned short x[NE];
-;	etoe53( x, &d );
-*/
-
-#ifdef DEC
-
-static void etoe53( x, e )
-unsigned short *x, *e;
-{
-etodec( x, e ); /* see etodec.c */
-}
-
-static void toe53( x, y )
-unsigned short *x, *y;
-{
-todec( x, y );
-}
-
-#else
-
-static void toe53(short unsigned int *x, short unsigned int *y)
-{
-unsigned short i;
-unsigned short *p;
-
-
-#ifdef NANS
-if( eiisnan(x) )
-	{
-	enan( y, 53 );
-	return;
-	}
-#endif
-p = &x[0];
-#ifdef IBMPC
-y += 3;
-#endif
-#ifdef DEC
-y += 3;
-#endif
-*y = 0;	/* output high order */
-if( *p++ )
-	*y = 0x8000;	/* output sign bit */
-
-i = *p++;
-if( i >= (unsigned int )2047 )
-	{	/* Saturate at largest number less than infinity. */
-#ifdef INFINITY
-	*y |= 0x7ff0;
-#ifdef IBMPC
-	*(--y) = 0;
-	*(--y) = 0;
-	*(--y) = 0;
-#else /* !IBMPC */
-	++y;
-	*y++ = 0;
-	*y++ = 0;
-	*y++ = 0;
-#endif /* IBMPC */
-#else /* !INFINITY */
-	*y |= (unsigned short )0x7fef;
-#ifdef IBMPC
-	*(--y) = 0xffff;
-	*(--y) = 0xffff;
-	*(--y) = 0xffff;
-#else /* !IBMPC */
-	++y;
-	*y++ = 0xffff;
-	*y++ = 0xffff;
-	*y++ = 0xffff;
-#endif
-#endif /* !INFINITY */
-	return;
-	}
-if( i == 0 )
-	{
-	(void )eshift( x, 4 );
-	}
-else
-	{
-	i <<= 4;
-	(void )eshift( x, 5 );
-	}
-i |= *p++ & (unsigned short )0x0f;	/* *p = xi[M] */
-*y |= (unsigned short )i; /* high order output already has sign bit set */
-#ifdef IBMPC
-*(--y) = *p++;
-*(--y) = *p++;
-*(--y) = *p;
-#else /* !IBMPC */
-++y;
-*y++ = *p++;
-*y++ = *p++;
-*y++ = *p++;
-#endif /* !IBMPC */
-}
-
-#endif /* not DEC */
-#endif /* SIMD_LDBL_MANT_DIG == 53 */
-
-#if SIMD_LDBL_MANT_DIG == 24
-/*
-; Convert IEEE single precision to e type
-;	float d;
-;	unsigned short x[N+2];
-;	dtox( &d, x );
-*/
-void e24toe( short unsigned int *pe, short unsigned int *y, LDPARMS *ldp )
-{
-register unsigned short r;
-register unsigned short *p, *e;
-unsigned short yy[NI];
-int denorm, k;
-
-e = pe;
-denorm = 0;	/* flag if denormalized number */
-ecleaz(yy);
-#ifdef IBMPC
-e += 1;
-#endif
-#ifdef DEC
-e += 1;
-#endif
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-yy[M] = (r & 0x7f) | 0200;
-r &= ~0x807f;	/* strip sign and 7 significand bits */
-#ifdef INFINITY
-if( r == 0x7f80 )
-	{
-#ifdef NANS
-#ifdef MIEEE
-	if( ((pe[0] & 0x7f) != 0) || (pe[1] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#else  /* !MIEEE */
-	if( ((pe[1] & 0x7f) != 0) || (pe[0] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#endif /* !MIEEE */
-#endif  /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( yy[0] )
-		eneg(y);
-	return;
-	}
-#endif
-r >>= 7;
-/* If zero exponent, then the significand is denormalized.
- * So, take back the understood high significand bit. */ 
-if( r == 0 )
-	{
-	denorm = 1;
-	yy[M] &= ~0200;
-	}
-r += EXONE - 0177;
-yy[E] = r;
-p = &yy[M+1];
-#ifdef IBMPC
-*p++ = *(--e);
-#endif
-#ifdef DEC
-*p++ = *(--e);
-#endif
-#ifdef MIEEE
-++e;
-*p++ = *e++;
-#endif
-(void )eshift( yy, -8 );
-if( denorm )
-	{ /* if zero exponent, then normalize the significand */
-	if( (k = enormlz(yy)) > NBITS )
-		ecleazs(yy);
-	else
-		yy[E] -= (unsigned short )(k-1);
-	}
-emovo( yy, y, ldp );
-}
-
-static void toe24(short unsigned int *x, short unsigned int *y)
-{
-unsigned short i;
-unsigned short *p;
-
-#ifdef NANS
-if( eiisnan(x) )
-	{
-	enan( y, 24 );
-	return;
-	}
-#endif
-p = &x[0];
-#ifdef IBMPC
-y += 1;
-#endif
-#ifdef DEC
-y += 1;
-#endif
-*y = 0;	/* output high order */
-if( *p++ )
-	*y = 0x8000;	/* output sign bit */
-
-i = *p++;
-if( i >= 255 )
-	{	/* Saturate at largest number less than infinity. */
-#ifdef INFINITY
-	*y |= (unsigned short )0x7f80;
-#ifdef IBMPC
-	*(--y) = 0;
-#endif
-#ifdef DEC
-	*(--y) = 0;
-#endif
-#ifdef MIEEE
-	++y;
-	*y = 0;
-#endif
-#else /* !INFINITY */
-	*y |= (unsigned short )0x7f7f;
-#ifdef IBMPC
-	*(--y) = 0xffff;
-#endif
-#ifdef DEC
-	*(--y) = 0xffff;
-#endif
-#ifdef MIEEE
-	++y;
-	*y = 0xffff;
-#endif
-#endif /* !INFINITY */
-	return;
-	}
-if( i == 0 )
-	{
-	(void )eshift( x, 7 );
-	}
-else
-	{
-	i <<= 7;
-	(void )eshift( x, 8 );
-	}
-i |= *p++ & (unsigned short )0x7f;	/* *p = xi[M] */
-*y |= i;	/* high order output already has sign bit set */
-#ifdef IBMPC
-*(--y) = *p;
-#endif
-#ifdef DEC
-*(--y) = *p;
-#endif
-#ifdef MIEEE
-++y;
-*y = *p;
-#endif
-}
-#endif /* SIMD_LDBL_MANT_DIG == 24 */
-
-/* Compare two e type numbers.
- *
- * unsigned short a[NE], b[NE];
- * ecmp( a, b );
- *
- *  returns +1 if a > b
- *           0 if a == b
- *          -1 if a < b
- *          -2 if either a or b is a NaN.
- */
-static int ecmp(short unsigned int *a, short unsigned int *b)
-{
-unsigned short ai[NI], bi[NI];
-register unsigned short *p, *q;
-register int i;
-int msign;
-
-#ifdef NANS
-if (eisnan (a)  || eisnan (b))
-	return( -2 );
-#endif
-emovi( a, ai );
-p = ai;
-emovi( b, bi );
-q = bi;
-
-if( *p != *q )
-	{ /* the signs are different */
-/* -0 equals + 0 */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			goto nzro;
-		if( bi[i] != 0 )
-			goto nzro;
-		}
-	return(0);
-nzro:
-	if( *p == 0 )
-		return( 1 );
-	else
-		return( -1 );
-	}
-/* both are the same sign */
-if( *p == 0 )
-	msign = 1;
-else
-	msign = -1;
-i = NI-1;
-do
-	{
-	if( *p++ != *q++ )
-		{
-		goto diff;
-		}
-	}
-while( --i > 0 );
-
-return(0);	/* equality */
-
-
-
-diff:
-
-if( *(--p) > *(--q) )
-	return( msign );		/* p is bigger */
-else
-	return( -msign );	/* p is littler */
-}
-
-
-/*
-;	Shift significand
-;
-;	Shifts significand area up or down by the number of bits
-;	given by the variable sc.
-*/
-static int eshift(short unsigned int *x, int sc)
-{
-unsigned short lost;
-unsigned short *p;
-
-if( sc == 0 )
-	return( 0 );
-
-lost = 0;
-p = x + NI-1;
-
-if( sc < 0 )
-	{
-	sc = -sc;
-	while( sc >= 16 )
-		{
-		lost |= *p;	/* remember lost bits */
-		eshdn6(x);
-		sc -= 16;
-		}
-
-	while( sc >= 8 )
-		{
-		lost |= *p & 0xff;
-		eshdn8(x);
-		sc -= 8;
-		}
-
-	while( sc > 0 )
-		{
-		lost |= *p & 1;
-		eshdn1(x);
-		sc -= 1;
-		}
-	}
-else
-	{
-	while( sc >= 16 )
-		{
-		eshup6(x);
-		sc -= 16;
-		}
-
-	while( sc >= 8 )
-		{
-		eshup8(x);
-		sc -= 8;
-		}
-
-	while( sc > 0 )
-		{
-		eshup1(x);
-		sc -= 1;
-		}
-	}
-if( lost )
-	lost = 1;
-return( (int )lost );
-}
-
-
-
-/*
-;	normalize
-;
-; Shift normalizes the significand area pointed to by argument
-; shift count (up = positive) is returned.
-*/
-static int enormlz(short unsigned int *x)
-{
-register unsigned short *p;
-int sc;
-
-sc = 0;
-p = &x[M];
-if( *p != 0 )
-	goto normdn;
-++p;
-if( *p & 0x8000 )
-	return( 0 );	/* already normalized */
-while( *p == 0 )
-	{
-	eshup6(x);
-	sc += 16;
-/* With guard word, there are NBITS+16 bits available.
- * return true if all are zero.
- */
-	if( sc > NBITS )
-		return( sc );
-	}
-/* see if high byte is zero */
-while( (*p & 0xff00) == 0 )
-	{
-	eshup8(x);
-	sc += 8;
-	}
-/* now shift 1 bit at a time */
-while( (*p  & 0x8000) == 0)
-	{
-	eshup1(x);
-	sc += 1;
-	if( sc > (NBITS+16) )
-		{
-		mtherr( "enormlz", UNDERFLOW );
-		return( sc );
-		}
-	}
-return( sc );
-
-/* Normalize by shifting down out of the high guard word
-   of the significand */
-normdn:
-
-if( *p & 0xff00 )
-	{
-	eshdn8(x);
-	sc -= 8;
-	}
-while( *p != 0 )
-	{
-	eshdn1(x);
-	sc -= 1;
-
-	if( sc < -NBITS )
-		{
-		mtherr( "enormlz", OVERFLOW );
-		return( sc );
-		}
-	}
-return( sc );
-}
-
-
-
-
-/* Convert e type number to decimal format ASCII string.
- * The constants are for 64 bit precision.
- */
-
-#define NTEN 12
-#define MAXP 4096
-
-#if NE == 10
-static unsigned short etens[NTEN + 1][NE] =
-{
-  {0x6576, 0x4a92, 0x804a, 0x153f,
-   0xc94c, 0x979a, 0x8a20, 0x5202, 0xc460, 0x7525,},	/* 10**4096 */
-  {0x6a32, 0xce52, 0x329a, 0x28ce,
-   0xa74d, 0x5de4, 0xc53d, 0x3b5d, 0x9e8b, 0x5a92,},	/* 10**2048 */
-  {0x526c, 0x50ce, 0xf18b, 0x3d28,
-   0x650d, 0x0c17, 0x8175, 0x7586, 0xc976, 0x4d48,},
-  {0x9c66, 0x58f8, 0xbc50, 0x5c54,
-   0xcc65, 0x91c6, 0xa60e, 0xa0ae, 0xe319, 0x46a3,},
-  {0x851e, 0xeab7, 0x98fe, 0x901b,
-   0xddbb, 0xde8d, 0x9df9, 0xebfb, 0xaa7e, 0x4351,},
-  {0x0235, 0x0137, 0x36b1, 0x336c,
-   0xc66f, 0x8cdf, 0x80e9, 0x47c9, 0x93ba, 0x41a8,},
-  {0x50f8, 0x25fb, 0xc76b, 0x6b71,
-   0x3cbf, 0xa6d5, 0xffcf, 0x1f49, 0xc278, 0x40d3,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0xf020, 0xb59d, 0x2b70, 0xada8, 0x9dc5, 0x4069,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0400, 0xc9bf, 0x8e1b, 0x4034,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x2000, 0xbebc, 0x4019,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0x9c40, 0x400c,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0xc800, 0x4005,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0xa000, 0x4002,},	/* 10**1 */
-};
-
-static unsigned short emtens[NTEN + 1][NE] =
-{
-  {0x2030, 0xcffc, 0xa1c3, 0x8123,
-   0x2de3, 0x9fde, 0xd2ce, 0x04c8, 0xa6dd, 0x0ad8,},	/* 10**-4096 */
-  {0x8264, 0xd2cb, 0xf2ea, 0x12d4,
-   0x4925, 0x2de4, 0x3436, 0x534f, 0xceae, 0x256b,},	/* 10**-2048 */
-  {0xf53f, 0xf698, 0x6bd3, 0x0158,
-   0x87a6, 0xc0bd, 0xda57, 0x82a5, 0xa2a6, 0x32b5,},
-  {0xe731, 0x04d4, 0xe3f2, 0xd332,
-   0x7132, 0xd21c, 0xdb23, 0xee32, 0x9049, 0x395a,},
-  {0xa23e, 0x5308, 0xfefb, 0x1155,
-   0xfa91, 0x1939, 0x637a, 0x4325, 0xc031, 0x3cac,},
-  {0xe26d, 0xdbde, 0xd05d, 0xb3f6,
-   0xac7c, 0xe4a0, 0x64bc, 0x467c, 0xddd0, 0x3e55,},
-  {0x2a20, 0x6224, 0x47b3, 0x98d7,
-   0x3f23, 0xe9a5, 0xa539, 0xea27, 0xa87f, 0x3f2a,},
-  {0x0b5b, 0x4af2, 0xa581, 0x18ed,
-   0x67de, 0x94ba, 0x4539, 0x1ead, 0xcfb1, 0x3f94,},
-  {0xbf71, 0xa9b3, 0x7989, 0xbe68,
-   0x4c2e, 0xe15b, 0xc44d, 0x94be, 0xe695, 0x3fc9,},
-  {0x3d4d, 0x7c3d, 0x36ba, 0x0d2b,
-   0xfdc2, 0xcefc, 0x8461, 0x7711, 0xabcc, 0x3fe4,},
-  {0xc155, 0xa4a8, 0x404e, 0x6113,
-   0xd3c3, 0x652b, 0xe219, 0x1758, 0xd1b7, 0x3ff1,},
-  {0xd70a, 0x70a3, 0x0a3d, 0xa3d7,
-   0x3d70, 0xd70a, 0x70a3, 0x0a3d, 0xa3d7, 0x3ff8,},
-  {0xcccd, 0xcccc, 0xcccc, 0xcccc,
-   0xcccc, 0xcccc, 0xcccc, 0xcccc, 0xcccc, 0x3ffb,},	/* 10**-1 */
-};
-#else
-static unsigned short etens[NTEN+1][NE] = {
-{0xc94c,0x979a,0x8a20,0x5202,0xc460,0x7525,},/* 10**4096 */
-{0xa74d,0x5de4,0xc53d,0x3b5d,0x9e8b,0x5a92,},/* 10**2048 */
-{0x650d,0x0c17,0x8175,0x7586,0xc976,0x4d48,},
-{0xcc65,0x91c6,0xa60e,0xa0ae,0xe319,0x46a3,},
-{0xddbc,0xde8d,0x9df9,0xebfb,0xaa7e,0x4351,},
-{0xc66f,0x8cdf,0x80e9,0x47c9,0x93ba,0x41a8,},
-{0x3cbf,0xa6d5,0xffcf,0x1f49,0xc278,0x40d3,},
-{0xf020,0xb59d,0x2b70,0xada8,0x9dc5,0x4069,},
-{0x0000,0x0000,0x0400,0xc9bf,0x8e1b,0x4034,},
-{0x0000,0x0000,0x0000,0x2000,0xbebc,0x4019,},
-{0x0000,0x0000,0x0000,0x0000,0x9c40,0x400c,},
-{0x0000,0x0000,0x0000,0x0000,0xc800,0x4005,},
-{0x0000,0x0000,0x0000,0x0000,0xa000,0x4002,}, /* 10**1 */
-};
-
-static unsigned short emtens[NTEN+1][NE] = {
-{0x2de4,0x9fde,0xd2ce,0x04c8,0xa6dd,0x0ad8,}, /* 10**-4096 */
-{0x4925,0x2de4,0x3436,0x534f,0xceae,0x256b,}, /* 10**-2048 */
-{0x87a6,0xc0bd,0xda57,0x82a5,0xa2a6,0x32b5,},
-{0x7133,0xd21c,0xdb23,0xee32,0x9049,0x395a,},
-{0xfa91,0x1939,0x637a,0x4325,0xc031,0x3cac,},
-{0xac7d,0xe4a0,0x64bc,0x467c,0xddd0,0x3e55,},
-{0x3f24,0xe9a5,0xa539,0xea27,0xa87f,0x3f2a,},
-{0x67de,0x94ba,0x4539,0x1ead,0xcfb1,0x3f94,},
-{0x4c2f,0xe15b,0xc44d,0x94be,0xe695,0x3fc9,},
-{0xfdc2,0xcefc,0x8461,0x7711,0xabcc,0x3fe4,},
-{0xd3c3,0x652b,0xe219,0x1758,0xd1b7,0x3ff1,},
-{0x3d71,0xd70a,0x70a3,0x0a3d,0xa3d7,0x3ff8,},
-{0xcccd,0xcccc,0xcccc,0xcccc,0xcccc,0x3ffb,}, /* 10**-1 */
-};
-#endif
-
-
-
-/* ASCII string outputs for unix */
-
-
-#if 0
-void _IO_ldtostr(x, string, ndigs, flags, fmt)
-long double *x;
-char *string;
-int ndigs;
-int flags;
-char fmt;
-{
-unsigned short w[NI];
-char *t, *u;
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-if (sizeof(long double) == 16)
-  e113toe( (unsigned short *)x, w, ldp );
-else
-  e64toe( (unsigned short *)x, w, ldp );
-
-etoasc( w, string, ndigs, -1, ldp );
-if( ndigs == 0 && flags == 0 )
-	{
-	/* Delete the decimal point unless alternate format.  */
-	t = string;	
-	while( *t != '.' )
-		++t;
-	u = t +  1;
-	while( *t != '\0' )
-		*t++ = *u++;
-	}
-if (*string == ' ')
-	{
-	t = string;	
-	u = t + 1;
-	while( *t != '\0' )
-		*t++ = *u++;
-	}
-if (fmt == 'E')
-	{
-	t = string;	
-	while( *t != 'e' )
-		++t;
-	*t = 'E';
-	}
-}
-
-#endif
-
-/* This routine will not return more than NDEC+1 digits. */
-
-char *
-_simdldtoa_r (struct _reent *ptr, LONG_DOUBLE_UNION *d, int mode, int ndigits, int *decpt, 
-          int *sign, char **rve)
-{
-unsigned short e[NI];
-char *s, *p;
-int i, j, k;
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-char *outstr;
-
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-  _REENT_CHECK_MP(ptr);
-
-/* reentrancy addition to use mprec storage pool */
-if (_REENT_MP_RESULT(ptr))
-  {
-    _REENT_MP_RESULT(ptr)->_k = _REENT_MP_RESULT_K(ptr);
-    _REENT_MP_RESULT(ptr)->_maxwds = 1 << _REENT_MP_RESULT_K(ptr);
-    Bfree (ptr, _REENT_MP_RESULT(ptr));
-    _REENT_MP_RESULT(ptr) = 0;
-  }
-
-#if SIMD_LDBL_MANT_DIG == 24
-e24toe( (unsigned short *)d, e, ldp );
-#elif SIMD_LDBL_MANT_DIG == 53
-e53toe( (unsigned short *)d, e, ldp );
-#elif SIMD_LDBL_MANT_DIG == 64
-e64toe( (unsigned short *)d, e, ldp );
-#else
-e113toe( (unsigned short *)d, e, ldp );
-#endif
-
-if( eisneg(e) )
-        *sign = 1;
-else
-        *sign = 0;
-/* Mode 3 is "f" format.  */
-if( mode != 3 )
-        ndigits -= 1;
-/* Mode 0 is for %.999 format, which is supposed to give a
-   minimum length string that will convert back to the same binary value.
-   For now, just ask for 20 digits which is enough but sometimes too many.  */
-if( mode == 0 )
-        ndigits = 20;
-
-/* reentrancy addition to use mprec storage pool */
-/* we want to have enough space to hold the formatted result */
-i = ndigits + (mode == 3 ? (MAX_EXP_DIGITS + 1) : 1);
-j = sizeof (__ULong);
-for (_REENT_MP_RESULT_K(ptr) = 0; sizeof (_Bigint) - sizeof (__ULong) + j <= (unsigned)i; j <<= 1)
-  _REENT_MP_RESULT_K(ptr)++;
-_REENT_MP_RESULT(ptr) = Balloc (ptr, _REENT_MP_RESULT_K(ptr));
-outstr = (char *)_REENT_MP_RESULT(ptr);
-
-/* This sanity limit must agree with the corresponding one in etoasc, to
-   keep straight the returned value of outexpon.  */
-if( ndigits > NDEC )
-        ndigits = NDEC;
-
-etoasc( e, outstr, ndigits, mode, ldp );
-s =  outstr;
-if( eisinf(e) || eisnan(e) )
-        {
-        *decpt = 9999;
-        goto stripspaces;
-        }
-*decpt = ldp->outexpon + 1;
-
-/* Transform the string returned by etoasc into what the caller wants.  */
-
-/* Look for decimal point and delete it from the string. */
-s = outstr;
-while( *s != '\0' )
-        {
-        if( *s == '.' )
-               goto yesdecpt;
-        ++s;
-        }
-goto nodecpt;
-
-yesdecpt:
-
-/* Delete the decimal point.  */
-while( *s != '\0' )
-        {
-        *s = *(s+1);
-        ++s;
-        }
-
-nodecpt:
-
-/* Back up over the exponent field. */
-while( *s != 'E' && s > outstr)
-        --s;
-*s = '\0';
-
-stripspaces:
-
-/* Strip leading spaces and sign. */
-p = outstr;
-while( *p == ' ' || *p == '-')
-        ++p;
-
-/* Find new end of string.  */
-s = outstr;
-while( (*s++ = *p++) != '\0' )
-        ;
---s;
-
-/* Strip trailing zeros.  */
-if( mode == 2 )
-        k = 1;
-else if( ndigits > ldp->outexpon )
-        k = ndigits;
-else
-        k = ldp->outexpon;
-
-while( *(s-1) == '0' && ((s - outstr) > k))
-        *(--s) = '\0';
-
-/* In f format, flush small off-scale values to zero.
-   Rounding has been taken care of by etoasc. */
-if( mode == 3 && ((ndigits + ldp->outexpon) < 0))
-        {
-        s = outstr;
-        *s = '\0';
-        *decpt = 0;
-        }
-
-if( rve )
-        *rve = s;
-return outstr;
-}
-
-/* Routine used to tell if long double is NaN or Infinity or regular number. 
-   Returns:  0 = regular number
-             1 = Nan
-             2 = Infinity
-*/
-int
-_simdldcheck (LONG_DOUBLE_UNION *d)
-{
-unsigned short e[NI];
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-#if SIMD_LDBL_MANT_DIG == 24
-e24toe( (unsigned short *)d, e, ldp );
-#elif SIMD_LDBL_MANT_DIG == 53
-e53toe( (unsigned short *)d, e, ldp );
-#elif SIMD_LDBL_MANT_DIG == 64
-e64toe( (unsigned short *)d, e, ldp );
-#else
-e113toe( (unsigned short *)d, e, ldp );
-#endif
-
-if( (e[NE-1] & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(e) )
-		return( 1 );
-#endif
-	return( 2 );
-	}
-else
-	return( 0 );
-} /* _ldcheck */
-
-static void etoasc(short unsigned int *x, char *string, int ndigits, int outformat, LDPARMS *ldp)
-{
-long digit;
-unsigned short y[NI], t[NI], u[NI], w[NI];
-unsigned short *p, *r, *ten;
-unsigned short sign;
-int i, j, k, expon, rndsav, ndigs;
-char *s, *ss;
-unsigned short m;
-unsigned short *equot = ldp->equot;
-
-ndigs = ndigits;
-rndsav = ldp->rndprc;
-#ifdef NANS
-if( eisnan(x) )
-	{
-	sprintf( string, " NaN " );
-	expon = 9999;
-	goto bxit;
-	}
-#endif
-ldp->rndprc = NBITS;		/* set to full precision */
-emov( x, y ); /* retain external format */
-if( y[NE-1] & 0x8000 )
-	{
-	sign = 0xffff;
-	y[NE-1] &= 0x7fff;
-	}
-else
-	{
-	sign = 0;
-	}
-expon = 0;
-ten = &etens[NTEN][0];
-emov( eone, t );
-/* Test for zero exponent */
-if( y[NE-1] == 0 )
-	{
-	for( k=0; k<NE-1; k++ )
-		{
-		if( y[k] != 0 )
-			goto tnzro; /* denormalized number */
-		}
-	goto isone; /* legal all zeros */
-	}
-tnzro:
-
-/* Test for infinity.
- */
-if( y[NE-1] == 0x7fff )
-	{
-	if( sign )
-		sprintf( string, " -Infinity " );
-	else
-		sprintf( string, " Infinity " );
-	expon = 9999;
-	goto bxit;
-	}
-
-/* Test for exponent nonzero but significand denormalized.
- * This is an error condition.
- */
-if( (y[NE-1] != 0) && ((y[NE-2] & 0x8000) == 0) )
-	{
-	mtherr( "etoasc", DOMAIN );
-	sprintf( string, "NaN" );
-	expon = 9999;
-	goto bxit;
-	}
-
-/* Compare to 1.0 */
-i = ecmp( eone, y );
-if( i == 0 )
-	goto isone;
-
-if( i < 0 )
-	{ /* Number is greater than 1 */
-/* Convert significand to an integer and strip trailing decimal zeros. */
-	emov( y, u );
-	u[NE-1] = EXONE + NBITS - 1;
-
-	p = &etens[NTEN-4][0];
-	m = 16;
-do
-	{
-	ediv( p, u, t, ldp );
-	efloor( t, w, ldp );
-	for( j=0; j<NE-1; j++ )
-		{
-		if( t[j] != w[j] )
-			goto noint;
-		}
-	emov( t, u );
-	expon += (int )m;
-noint:
-	p += NE;
-	m >>= 1;
-	}
-while( m != 0 );
-
-/* Rescale from integer significand */
-	u[NE-1] += y[NE-1] - (unsigned int )(EXONE + NBITS - 1);
-	emov( u, y );
-/* Find power of 10 */
-	emov( eone, t );
-	m = MAXP;
-	p = &etens[0][0];
-	while( ecmp( ten, u ) <= 0 )
-		{
-		if( ecmp( p, u ) <= 0 )
-			{
-			ediv( p, u, u, ldp );
-			emul( p, t, t, ldp );
-			expon += (int )m;
-			}
-		m >>= 1;
-		if( m == 0 )
-			break;
-		p += NE;
-		}
-	}
-else
-	{ /* Number is less than 1.0 */
-/* Pad significand with trailing decimal zeros. */
-	if( y[NE-1] == 0 )
-		{
-		while( (y[NE-2] & 0x8000) == 0 )
-			{
-			emul( ten, y, y, ldp );
-			expon -= 1;
-			}
-		}
-	else
-		{
-		emovi( y, w );
-		for( i=0; i<NDEC+1; i++ )
-			{
-			if( (w[NI-1] & 0x7) != 0 )
-				break;
-/* multiply by 10 */
-			emovz( w, u );
-			eshdn1( u );
-			eshdn1( u );
-			eaddm( w, u );
-			u[1] += 3;
-			while( u[2] != 0 )
-				{
-				eshdn1(u);
-				u[1] += 1;
-				}
-			if( u[NI-1] != 0 )
-				break;
-			if( eone[NE-1] <= u[1] )
-				break;
-			emovz( u, w );
-			expon -= 1;
-			}
-		emovo( w, y, ldp );
-		}
-	k = -MAXP;
-	p = &emtens[0][0];
-	r = &etens[0][0];
-	emov( y, w );
-	emov( eone, t );
-	while( ecmp( eone, w ) > 0 )
-		{
-		if( ecmp( p, w ) >= 0 )
-			{
-			emul( r, w, w, ldp );
-			emul( r, t, t, ldp );
-			expon += k;
-			}
-		k /= 2;
-		if( k == 0 )
-			break;
-		p += NE;
-		r += NE;
-		}
-	ediv( t, eone, t, ldp );
-	}
-isone:
-/* Find the first (leading) digit. */
-emovi( t, w );
-emovz( w, t );
-emovi( y, w );
-emovz( w, y );
-eiremain( t, y, ldp );
-digit = equot[NI-1];
-while( (digit == 0) && (ecmp(y,ezero) != 0) )
-	{
-	eshup1( y );
-	emovz( y, u );
-	eshup1( u );
-	eshup1( u );
-	eaddm( u, y );
-	eiremain( t, y, ldp );
-	digit = equot[NI-1];
-	expon -= 1;
-	}
-s = string;
-if( sign )
-	*s++ = '-';
-else
-	*s++ = ' ';
-/* Examine number of digits requested by caller. */
-if( outformat == 3 )
-        ndigs += expon;
-/*
-else if( ndigs < 0 )
-        ndigs = 0;
-*/
-if( ndigs > NDEC )
-	ndigs = NDEC;
-if( digit == 10 )
-	{
-	*s++ = '1';
-	*s++ = '.';
-	if( ndigs > 0 )
-		{
-		*s++ = '0';
-		ndigs -= 1;
-		}
-	expon += 1;
-	if( ndigs < 0 )
-	        {
-	        ss = s;
-	        goto doexp;
-	        }
-	}
-else
-	{
-	*s++ = (char )digit + '0';
-	*s++ = '.';
-	}
-/* Generate digits after the decimal point. */
-for( k=0; k<=ndigs; k++ )
-	{
-/* multiply current number by 10, without normalizing */
-	eshup1( y );
-	emovz( y, u );
-	eshup1( u );
-	eshup1( u );
-	eaddm( u, y );
-	eiremain( t, y, ldp );
-	*s++ = (char )equot[NI-1] + '0';
-	}
-digit = equot[NI-1];
---s;
-ss = s;
-/* round off the ASCII string */
-if( digit > 4 )
-	{
-/* Test for critical rounding case in ASCII output. */
-	if( digit == 5 )
-		{
-		emovo( y, t, ldp );
-		if( ecmp(t,ezero) != 0 )
-			goto roun;	/* round to nearest */
-		if( (*(s-1) & 1) == 0 )
-			goto doexp;	/* round to even */
-		}
-/* Round up and propagate carry-outs */
-roun:
-	--s;
-	k = *s & 0x7f;
-/* Carry out to most significant digit? */
-	if( ndigs < 0 )
-		{
-	        /* This will print like "1E-6". */
-		*s = '1';
-		expon += 1;
-		goto doexp;
-		}
-	else if( k == '.' )
-		{
-		--s;
-		k = *s;
-		k += 1;
-		*s = (char )k;
-/* Most significant digit carries to 10? */
-		if( k > '9' )
-			{
-			expon += 1;
-			*s = '1';
-			}
-		goto doexp;
-		}
-/* Round up and carry out from less significant digits */
-	k += 1;
-	*s = (char )k;
-	if( k > '9' )
-		{
-		*s = '0';
-		goto roun;
-		}
-	}
-doexp:
-#ifdef __GO32__
-if( expon >= 0 )
-	sprintf( ss, "e+%02d", expon );
-else
-	sprintf( ss, "e-%02d", -expon );
-#else
-	sprintf( ss, "E%d", expon );
-#endif
-bxit:
-ldp->rndprc = rndsav;
-ldp->outexpon =  expon;
-}
-
-
-
-
-/*
-;								ASCTOQ
-;		ASCTOQ.MAC		LATEST REV: 11 JAN 84
-;					SLM, 3 JAN 78
-;
-;	Convert ASCII string to quadruple precision floating point
-;
-;		Numeric input is free field decimal number
-;		with max of 15 digits with or without 
-;		decimal point entered as ASCII from teletype.
-;	Entering E after the number followed by a second
-;	number causes the second number to be interpreted
-;	as a power of 10 to be multiplied by the first number
-;	(i.e., "scientific" notation).
-;
-;	Usage:
-;		asctoq( string, q );
-*/
-
-void _simdstrtold (char *s, char **se, LONG_DOUBLE_UNION *x)
-{
-  LDPARMS rnd;
-  LDPARMS *ldp = &rnd;
-  int lenldstr;
-
-  rnd.rlast = -1;
-  rnd.rndprc = NBITS;
-
-  lenldstr = asctoeg( s, (unsigned short *)x, SIMD_LDBL_MANT_DIG, ldp );
-  if (se)
-    *se = s + lenldstr;
-}
-
-#define REASONABLE_LEN 200
-
-static int
-asctoeg(char *ss, short unsigned int *y, int oprec, LDPARMS *ldp)
-{
-unsigned short yy[NI], xt[NI], tt[NI];
-int esign, decflg, sgnflg, nexp, exp, prec, lost;
-int k, trail, c, rndsav;
-long lexp;
-unsigned short nsign, *p;
-char *sp, *s, *lstr;
-int lenldstr;
-int mflag = 0;
-char tmpstr[REASONABLE_LEN];
-
-/* Copy the input string. */
-c = strlen (ss) + 2;
-if (c <= REASONABLE_LEN)
-  lstr = tmpstr;
-else
-  {
-    lstr = (char *) calloc (c, 1);
-    mflag = 1;
-  }
-s = ss;
-lenldstr = 0;
-while( *s == ' ' ) /* skip leading spaces */
-  {
-    ++s;
-    ++lenldstr;
-  }
-sp = lstr;
-for( k=0; k<c; k++ )
-	{
-	if( (*sp++ = *s++) == '\0' )
-		break;
-	}
-*sp = '\0';
-s = lstr;
-
-rndsav = ldp->rndprc;
-ldp->rndprc = NBITS; /* Set to full precision */
-lost = 0;
-nsign = 0;
-decflg = 0;
-sgnflg = 0;
-nexp = 0;
-exp = 0;
-prec = 0;
-ecleaz( yy );
-trail = 0;
-
-nxtcom:
-k = *s - '0';
-if( (k >= 0) && (k <= 9) )
-	{
-/* Ignore leading zeros */
-	if( (prec == 0) && (decflg == 0) && (k == 0) )
-		goto donchr;
-/* Identify and strip trailing zeros after the decimal point. */
-	if( (trail == 0) && (decflg != 0) )
-		{
-		sp = s;
-		while( (*sp >= '0') && (*sp <= '9') )
-			++sp;
-/* Check for syntax error */
-		c = *sp & 0x7f;
-		if( (c != 'e') && (c != 'E') && (c != '\0')
-			&& (c != '\n') && (c != '\r') && (c != ' ')
-			&& (c != ',') )
-			goto error;
-		--sp;
-		while( *sp == '0' )
-			*sp-- = 'z';
-		trail = 1;
-		if( *s == 'z' )
-			goto donchr;
-		}
-/* If enough digits were given to more than fill up the yy register,
- * continuing until overflow into the high guard word yy[2]
- * guarantees that there will be a roundoff bit at the top
- * of the low guard word after normalization.
- */
-	if( yy[2] == 0 )
-		{
-		if( decflg )
-			nexp += 1; /* count digits after decimal point */
-		eshup1( yy );	/* multiply current number by 10 */
-		emovz( yy, xt );
-		eshup1( xt );
-		eshup1( xt );
-		eaddm( xt, yy );
-		ecleaz( xt );
-		xt[NI-2] = (unsigned short )k;
-		eaddm( xt, yy );
-		}
-	else
-		{
-		/* Mark any lost non-zero digit.  */
-		lost |= k;
-		/* Count lost digits before the decimal point.  */
-		if (decflg == 0)
-		        nexp -= 1;
-		}
-	prec += 1;
-	goto donchr;
-	}
-
-switch( *s )
-	{
-	case 'z':
-		break;
-	case 'E':
-	case 'e':
-		goto expnt;
-	case '.':	/* decimal point */
-		if( decflg )
-			goto error;
-		++decflg;
-		break;
-	case '-':
-		nsign = 0xffff;
-		if( sgnflg )
-			goto error;
-		++sgnflg;
-		break;
-	case '+':
-		if( sgnflg )
-			goto error;
-		++sgnflg;
-		break;
-	case ',':
-	case ' ':
-	case '\0':
-	case '\n':
-	case '\r':
-		goto daldone;
-	case 'i':
-	case 'I':
-		goto infinite;
-	default:
-	error:
-#ifdef NANS
-		enan( yy, NI*16 );
-#else
-		mtherr( "asctoe", DOMAIN );
-		ecleaz(yy);
-#endif
-		goto aexit;
-	}
-donchr:
-++s;
-goto nxtcom;
-
-/* Exponent interpretation */
-expnt:
-
-esign = 1;
-exp = 0;
-++s;
-/* check for + or - */
-if( *s == '-' )
-	{
-	esign = -1;
-	++s;
-	}
-if( *s == '+' )
-	++s;
-while( (*s >= '0') && (*s <= '9') )
-	{
-	exp *= 10;
-	exp += *s++ - '0';
-	if (exp > 4977)
-		{
-		if (esign < 0)
-			goto zero;
-		else
-			goto infinite;
-		}
-	}
-if( esign < 0 )
-	exp = -exp;
-if( exp > 4932 )
-	{
-infinite:
-	ecleaz(yy);
-	yy[E] = 0x7fff;  /* infinity */
-	goto aexit;
-	}
-if( exp < -4977 )
-	{
-zero:
-	ecleaz(yy);
-	goto aexit;
-	}
-
-daldone:
-nexp = exp - nexp;
-/* Pad trailing zeros to minimize power of 10, per IEEE spec. */
-while( (nexp > 0) && (yy[2] == 0) )
-	{
-	emovz( yy, xt );
-	eshup1( xt );
-	eshup1( xt );
-	eaddm( yy, xt );
-	eshup1( xt );
-	if( xt[2] != 0 )
-		break;
-	nexp -= 1;
-	emovz( xt, yy );
-	}
-if( (k = enormlz(yy)) > NBITS )
-	{
-	ecleaz(yy);
-	goto aexit;
-	}
-lexp = (EXONE - 1 + NBITS) - k;
-emdnorm( yy, lost, 0, lexp, 64, ldp );
-/* convert to external format */
-
-
-/* Multiply by 10**nexp.  If precision is 64 bits,
- * the maximum relative error incurred in forming 10**n
- * for 0 <= n <= 324 is 8.2e-20, at 10**180.
- * For 0 <= n <= 999, the peak relative error is 1.4e-19 at 10**947.
- * For 0 >= n >= -999, it is -1.55e-19 at 10**-435.
- */
-lexp = yy[E];
-if( nexp == 0 )
-	{
-	k = 0;
-	goto expdon;
-	}
-esign = 1;
-if( nexp < 0 )
-	{
-	nexp = -nexp;
-	esign = -1;
-	if( nexp > 4096 )
-		{ /* Punt.  Can't handle this without 2 divides. */
-		emovi( etens[0], tt );
-		lexp -= tt[E];
-		k = edivm( tt, yy, ldp );
-		lexp += EXONE;
-		nexp -= 4096;
-		}
-	}
-p = &etens[NTEN][0];
-emov( eone, xt );
-exp = 1;
-do
-	{
-	if( exp & nexp )
-		emul( p, xt, xt, ldp );
-	p -= NE;
-	exp = exp + exp;
-	}
-while( exp <= MAXP );
-
-emovi( xt, tt );
-if( esign < 0 )
-	{
-	lexp -= tt[E];
-	k = edivm( tt, yy, ldp );
-	lexp += EXONE;
-	}
-else
-	{
-	lexp += tt[E];
-	k = emulm( tt, yy, ldp );
-	lexp -= EXONE - 1;
-	}
-
-expdon:
-
-/* Round and convert directly to the destination type */
-if( oprec == 53 )
-	lexp -= EXONE - 0x3ff;
-else if( oprec == 24 )
-	lexp -= EXONE - 0177;
-#ifdef DEC
-else if( oprec == 56 )
-	lexp -= EXONE - 0201;
-#endif
-ldp->rndprc = oprec;
-emdnorm( yy, k, 0, lexp, 64, ldp );
-
-aexit:
-
-ldp->rndprc = rndsav;
-yy[0] = nsign;
-switch( oprec )
-	{
-#ifdef DEC
-	case 56:
-		todec( yy, y ); /* see etodec.c */
-		break;
-#endif
-#if SIMD_LDBL_MANT_DIG == 53
-	case 53:
-		toe53( yy, y );
-		break;
-#elif SIMD_LDBL_MANT_DIG == 24
-	case 24:
-		toe24( yy, y );
-		break;
-#elif SIMD_LDBL_MANT_DIG == 64
-	case 64:
-		toe64( yy, y );
-		break;
-#elif SIMD_LDBL_MANT_DIG == 113
-	case 113:
-		toe113( yy, y );
-		break;
-#else
-	case NBITS:
-		emovo( yy, y, ldp );
-		break;
-#endif
-	}
-lenldstr += s - lstr;
-if (mflag)
-  free (lstr);
-return lenldstr;
-}
-
-
- 
-/* y = largest integer not greater than x
- * (truncated toward minus infinity)
- *
- * unsigned short x[NE], y[NE]
- * LDPARMS *ldp
- *
- * efloor( x, y, ldp );
- */
-static unsigned short bmask[] = {
-0xffff,
-0xfffe,
-0xfffc,
-0xfff8,
-0xfff0,
-0xffe0,
-0xffc0,
-0xff80,
-0xff00,
-0xfe00,
-0xfc00,
-0xf800,
-0xf000,
-0xe000,
-0xc000,
-0x8000,
-0x0000,
-};
-
-static void efloor(short unsigned int *x, short unsigned int *y, LDPARMS *ldp)
-{
-register unsigned short *p;
-int e, expon, i;
-unsigned short f[NE];
-
-emov( x, f ); /* leave in external format */
-expon = (int )f[NE-1];
-e = (expon & 0x7fff) - (EXONE - 1);
-if( e <= 0 )
-	{
-	eclear(y);
-	goto isitneg;
-	}
-/* number of bits to clear out */
-e = NBITS - e;
-emov( f, y );
-if( e <= 0 )
-	return;
-
-p = &y[0];
-while( e >= 16 )
-	{
-	*p++ = 0;
-	e -= 16;
-	}
-/* clear the remaining bits */
-*p &= bmask[e];
-/* truncate negatives toward minus infinity */
-isitneg:
-
-if( (unsigned short )expon & (unsigned short )0x8000 )
-	{
-	for( i=0; i<NE-1; i++ )
-		{
-		if( f[i] != y[i] )
-			{
-			esub( eone, y, y, ldp );
-			break;
-			}
-		}
-	}
-}
-
-
-
-static void eiremain(short unsigned int *den, short unsigned int *num, LDPARMS *ldp)
-{
-long ld, ln;
-unsigned short j;
- unsigned short *equot = ldp->equot;
-
-ld = den[E];
-ld -= enormlz( den );
-ln = num[E];
-ln -= enormlz( num );
-ecleaz( equot );
-while( ln >= ld )
-	{
-	if( ecmpm(den,num) <= 0 )
-		{
-		esubm(den, num);
-		j = 1;
-		}
-	else
-		{
-		j = 0;
-		}
-	eshup1(equot);
-	equot[NI-1] |= j;
-	eshup1(num);
-	ln -= 1;
-	}
-emdnorm( num, 0, 0, ln, 0, ldp );
-}
-
-/* NaN bit patterns
- */
-#ifdef MIEEE
-static unsigned short nan113[8] = {
-  0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan64[6] = {0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan53[4] = {0x7fff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan24[2] = {0x7fff, 0xffff};
-#else /* !MIEEE */
-static unsigned short nan113[8] = {0, 0, 0, 0, 0, 0, 0x8000, 0x7fff};
-static unsigned short nan64[6] = {0, 0, 0, 0, 0xc000, 0x7fff};
-static unsigned short nan53[4] = {0, 0, 0, 0x7ff8};
-static unsigned short nan24[2] = {0, 0x7fc0};
-#endif /* !MIEEE */
-
-
-static void enan (short unsigned int *nan, int size)
-{
-int i, n;
-unsigned short *p;
-
-switch( size )
-	{
-#ifndef DEC
-	case 113:
-	n = 8;
-	p = nan113;
-	break;
-
-	case 64:
-	n = 6;
-	p = nan64;
-	break;
-
-	case 53:
-	n = 4;
-	p = nan53;
-	break;
-
-	case 24:
-	n = 2;
-	p = nan24;
-	break;
-
-	case NBITS:
-	for( i=0; i<NE-2; i++ )
-		*nan++ = 0;
-	*nan++ = 0xc000;
-	*nan++ = 0x7fff;
-	return;
-
-	case NI*16:
-	*nan++ = 0;
-	*nan++ = 0x7fff;
-	*nan++ = 0;
-	*nan++ = 0xc000;
-	for( i=4; i<NI; i++ )
-		*nan++ = 0;
-	return;
-#endif
-	default:
-	mtherr( "enan", DOMAIN );
-	return;
-	}
-for (i=0; i < n; i++)
-	*nan++ = *p++;
-}
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtosfix16.c b/newlib/libc/machine/powerpc/strtosfix16.c
deleted file mode 100644
index d3cfe0781..000000000
--- a/newlib/libc/machine/powerpc/strtosfix16.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
-FUNCTION
-        <<strtosfix16>>, <<strtosfix32>>, <<strtosfix64>>---string to signed fixed point
-
-INDEX
-	strtosfix16
-INDEX
-	strtosfix32
-INDEX
-	strtosfix64
-INDEX
-	_strtosfix16_r
-INDEX
-	_strtosfix32_r
-INDEX
-	_strtosfix64_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        __int16 strtosfix16 (const char *<[s]>, char **<[ptr]>);
-
-        __int32 strtosfix32 (const char *<[s]>, char **<[ptr]>);
-
-        __int64 strtosfix64 (const char *<[s]>, char **<[ptr]>);
-
-        __int16 _strtosfix16_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-        __int32 _strtosfix32_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-        __int64 _strtosfix64_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	__int16 strtosfix16 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__int32 strtosfix32 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__int64 strtosfix64 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__int16 _strtosfix16_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__int32 _strtosfix32_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__int64 _strtosfix64_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-DESCRIPTION
-        The function <<strtosfix16>> converts the string <<*<[s]>>> to
-	a fixed-point sign + 15-bits fraction representation.  The function 
-	follows the same rules as <<strtod>>.
-
-	The substring converted is the longest initial
-	subsequence of <[s]>, beginning with the first
-	non-whitespace character, that has the format:
-	.[+|-]<[digits]>[.][<[digits]>][(e|E)[+|-]<[digits]>] 
-	The substring contains no characters if <[s]> is empty, consists
-	entirely of whitespace, or if the first non-whitespace
-	character is something other than <<+>>, <<->>, <<.>>, or a
-	digit. If the substring is empty, no conversion is done, and
-	the value of <[s]> is stored in <<*<[ptr]>>>.  Otherwise,
-	the substring is converted, and a pointer to the final string
-	(which will contain at least the terminating null character of
-	<[s]>) is stored in <<*<[ptr]>>>.  If you want no
-	assignment to <<*<[ptr]>>>, pass a null pointer as <[ptr]>.
-
-	<<strtosfix32>> is identical to <<strtosfix16>> except that it 
-	converts to fixed-point sign + 31-bits fraction representation.
-	<<strtosfix64>> is also similar, except that it converts
-	to fixed-point sign + 63-bit fraction format.
-
-	The alternate functions <<_strtosfix16_r>>, <<_strtosfix32_r>>,
-	and <<_strtosfix64_r>> are reentrant versions.
-	The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-	The functions return the converted substring value, if any.  If
-	no conversion can be performed, then 0 is returned.  If the converted
-	value is a NaN, 0 is returned and errno is set to <<EDOM>>.
-	If the converted value exceeds the maximum positive fixed-point value, 
-	the output value is saturated to the maximum value and <<ERANGE>> is stored in 
-	errno.  If the converted value is less than the minimum fixed-point negative
-	value, then the output is saturated to the minimum value  and <<ERANGE>> is stored
-	in errno.  Otherwise, the converted value is returned in the
-	specified fixed-point format.
-
-PORTABILITY
-        <<strtosfix16>>, <<strtosfix32>>, and <<strtosfix64>> are non-standard.
-
-        The OS subroutines of <<strtod>> are required.
-*/
-
-#ifdef __SPE__ 
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "vfieeefp.h"
-
-/*
- * Convert a string to a fixed-point (sign + 15-bits) value.
- *
- * Ignores `locale' stuff.
- */
-__int16_t
-_DEFUN (_strtosfix16_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union double_union dbl;
-  unsigned long tmp, tmp2;
-  int exp, negexp, sign;
-  __int16_t result;
-
-  dbl.d = _strtod_r (rptr, nptr, endptr);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  if (!finite(dbl.d))
-    {
-      if (isnan (dbl.d))
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(dbl) & Sign_bit)
-	return SHRT_MIN;
-      return SHRT_MAX;
-    }
-
-  /* check for normal saturation */
-  if (dbl.d >= 1.0)
-    {
-      rptr->_errno = ERANGE;
-      return SHRT_MAX;
-    }
-  else if (dbl.d < -1.0)
-    {
-      rptr->_errno = ERANGE;
-      return SHRT_MIN;
-    }
-
-  /* otherwise we have normal number in range */
-
-  /* strip off sign and exponent */
-  sign = word0(dbl) & Sign_bit;
-  exp = ((word0(dbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 15)
-    return 0;
-  /* add in implicit normalized bit */
-  tmp = word0(dbl) | Exp_msk1;
-  /* remove exponent and sign */
-  tmp <<= Ebits;
-  if (negexp != 0)
-    {
-      /* perform rounding */
-      tmp2 = tmp + (1 << (negexp - 1));
-      result = (short)(tmp2 >> (negexp + 16));
-      /* check if rounding caused carry bit which must be added into result */
-      if (tmp2 < tmp)
-	result |= (1 << (16 - negexp));
-      /* check if positive saturation has occurred because of rounding */
-      if (!sign && result < 0)
-	{
-	  rptr->_errno = ERANGE;
-	  return SHRT_MAX;
-	}
-    }
-  else
-    {
-      /* we have -1.0, no rounding necessary */
-      return SHRT_MIN;
-    }
-
-  return  sign ? -result : result;
-}
-
-#ifndef _REENT_ONLY
-
-__int16_t
-_DEFUN (strtosfix16, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtosfix16_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtosfix32.c b/newlib/libc/machine/powerpc/strtosfix32.c
deleted file mode 100644
index 2e22c1458..000000000
--- a/newlib/libc/machine/powerpc/strtosfix32.c
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "vfieeefp.h"
-
-/*
- * Convert a string to a fixed-point (sign + 31-bits) value.
- *
- * Ignores `locale' stuff.
- */
-__int32_t
-_DEFUN (_strtosfix32_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union double_union dbl;
-  int exp, negexp, sign;
-  unsigned long tmp, tmp2;
-  long result = 0;
-
-  dbl.d = _strtod_r (rptr, nptr, endptr);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  if (!finite(dbl.d))
-    {
-      if (isnan (dbl.d))
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(dbl) & Sign_bit)
-	return LONG_MIN;
-      return LONG_MAX;
-    }
-
-  /* check for normal saturation */
-  if (dbl.d >= 1.0)
-    {
-      rptr->_errno = ERANGE;
-      return LONG_MAX;
-    }
-  else if (dbl.d < -1.0)
-    {
-      rptr->_errno = ERANGE;
-      return LONG_MIN;
-    }
-
-  /* otherwise we have normal number in range */
-
-  /* strip off sign and exponent */
-  sign = word0(dbl) & Sign_bit;
-  exp = ((word0(dbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 31)
-    return 0;
-  word0(dbl) &= ~(Exp_mask | Sign_bit);
-  /* add in implicit normalized bit */
-  word0(dbl) |= Exp_msk1;
-  /* shift so result is contained in single word */
-  tmp = word0(dbl) << Ebits;
-  tmp |= ((unsigned long)word1(dbl) >> (32 - Ebits));
-  if (negexp != 0)
-    {
-      /* perform rounding */
-      tmp2 = tmp + (1 << (negexp - 1));
-      result = (long)(tmp2 >> negexp);
-      /* check if rounding caused carry bit which must be added into result */
-      if (tmp2 < tmp)
-	result |= (1 << (32 - negexp));
-      /* check if positive saturation has occurred because of rounding */
-      if (!sign && result < 0)
-	{
-	  rptr->_errno = ERANGE;
-	  return LONG_MAX;
-	}
-    }
-  else
-    {
-      /* we have -1.0, no rounding necessary */
-      return LONG_MIN;
-    }
-
-  return sign ? -result : result;
-}
-
-#ifndef _REENT_ONLY
-
-__int32_t
-_DEFUN (strtosfix32, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtosfix32_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtosfix64.c b/newlib/libc/machine/powerpc/strtosfix64.c
deleted file mode 100644
index 3006632a4..000000000
--- a/newlib/libc/machine/powerpc/strtosfix64.c
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "fix64.h"
-
-/*
- * Convert a string to a fixed-point (sign + 63-bits) value.
- *
- * Ignores `locale' stuff.
- */
-__int64_t
-_DEFUN (_strtosfix64_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union long_double_union ldbl;
-  int exp, negexp, sign, ld_type;
-  __uint64_t tmp, tmp2;
-  __int64_t result = 0;
-
-  init(ldbl);
-
-  _simdstrtold ((char *)nptr, endptr, &ldbl);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  ld_type = _simdldcheck (&ldbl);
-  if (ld_type != 0)
-    {
-      if (ld_type == 1)
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(ldbl) & Sign_bit)
-	return LONG_LONG_MIN;
-      return LONG_LONG_MAX;
-    }
-
-  /* strip off sign and exponent */
-  sign = word0(ldbl) & Sign_bit;
-  exp = ((word0(ldbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 63)
-    return 0;
-  word0(ldbl) &= ~(Exp_mask | Sign_bit);
-  /* add in implicit normalized bit */
-  word0(ldbl) |= Exp_msk1;
-  /* shift so result is contained in single word */
-  tmp = word0(ldbl) << Ebits;
-  tmp |= ((unsigned long)word1(ldbl) >> (32 - Ebits));
-  tmp <<= 32;
-  if (Ebits < 32)
-    tmp |= ((unsigned long)word1(ldbl) << Ebits);
-  tmp |= ((unsigned long)word2(ldbl) >> (32 - Ebits));
-
-  /* check for saturation */
-  if (sign)
-    {
-      if (exp > 0 || (exp == 0 && tmp != 0x8000000000000000LL))
-	{
-	  rptr->_errno = ERANGE;
-	  return LONG_LONG_MIN;
-	}
-    }
-  else
-    {
-      if (exp >= 0)
-	{
-	  rptr->_errno = ERANGE;
-	  return LONG_LONG_MAX;
-	}
-    }
-
-  /* otherwise we have normal number in range */
-  if (negexp != 0)
-    {
-      /* perform rounding */
-      tmp2 = tmp + (1 << (negexp - 1));
-      result = (long long)(tmp2 >> negexp);
-      /* check if rounding caused carry bit which must be added into result */
-      if (tmp2 < tmp)
-	result |= (1 << (64 - negexp));
-      /* check if positive saturation has occurred because of rounding */
-      if (!sign && result < 0)
-	{
-	  rptr->_errno = ERANGE;
-	  return LONG_LONG_MAX;
-	}
-    }
-  else
-    {
-      /* we have -1.0, no rounding necessary */
-      return LONG_LONG_MIN;
-    }
-
-  return sign ? -result : result;
-}
-
-#ifndef _REENT_ONLY
-
-__int64_t
-_DEFUN (strtosfix64, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtosfix64_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtoufix16.c b/newlib/libc/machine/powerpc/strtoufix16.c
deleted file mode 100644
index d90255c0e..000000000
--- a/newlib/libc/machine/powerpc/strtoufix16.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
-FUNCTION
-        <<strtoufix16>>, <<strtoufix32>>, <<strtoufix64>>---string to signed fixed point
-
-INDEX
-	strtoufix16
-INDEX
-	strtoufix32
-INDEX
-	strtoufix64
-INDEX
-	_strtoufix16_r
-INDEX
-	_strtoufix32_r
-INDEX
-	_strtoufix64_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        __uint16_t strtoufix16 (const char *<[s]>, char **<[ptr]>);
-
-        __uint32_t strtoufix32 (const char *<[s]>, char **<[ptr]>);
-
-        __uint64_t strtoufix64 (const char *<[s]>, char **<[ptr]>);
-
-        __uint16_t _strtoufix16_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-        __uint32_t _strtoufix32_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-        __uint64_t _strtoufix64_r (void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	__uint16_t strtoufix16 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__uint32_t strtoufix32 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__uint64_t strtoufix64 (<[s]>, <[ptr]>)
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__uint16_t _strtoufix16_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__uint32_t _strtoufix32_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-	__uint64_t _strtoufix64_r (<[reent]>, <[s]>, <[ptr]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-
-DESCRIPTION
-        The function <<strtoufix16>> converts the string <<*<[s]>>> to
-	a fixed-point 16-bits fraction representation.  The function 
-	follows the same rules as <<strtod>>.
-
-	The substring converted is the longest initial
-	subsequence of <[s]>, beginning with the first
-	non-whitespace character, that has the format:
-	.[+|-]<[digits]>[.][<[digits]>][(e|E)[+|-]<[digits]>] 
-	The substring contains no characters if <[s]> is empty, consists
-	entirely of whitespace, or if the first non-whitespace
-	character is something other than <<+>>, <<->>, <<.>>, or a
-	digit. If the substring is empty, no conversion is done, and
-	the value of <[s]> is stored in <<*<[ptr]>>>.  Otherwise,
-	the substring is converted, and a pointer to the final string
-	(which will contain at least the terminating null character of
-	<[s]>) is stored in <<*<[ptr]>>>.  If you want no
-	assignment to <<*<[ptr]>>>, pass a null pointer as <[ptr]>.
-
-	<<strtoufix32>> is identical to <<strtoufix16>> except that it 
-	converts to fixed-point 32-bit fraction representation.
-	<<strtoufix64>> is also similar, except that it converts
-	to fixed-point 64-bit fraction.
-
-	The alternate functions <<_strtoufix16_r>>, <<_strtoufix32_r>>,
-	and <<_strtoufix64_r>> are reentrant versions.
-	The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-	The functions return the converted substring value, if any.  If
-	no conversion can be performed, then 0 is returned.  If the converted
-	value is a NaN, 0 is returned and errno is set to <<EDOM>>.
-	If the converted value exceeds the maximum positive unsigned fixed-point value, 
-	the output value is saturated to the maximum value and <<ERANGE>> is stored in 
-	errno.  If the converted value is less than 0, then the output is saturated to 0
-	and <<ERANGE>> is stored in errno.  Otherwise, the converted value is returned in the
-	specified fixed-point format.
-
-PORTABILITY
-        <<strtoufix16>>, <<strtoufix32>>, and <<strtoufix64>> are non-standard.
-
-        The OS subroutines of <<strtod>> are required.
-*/
-
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "vfieeefp.h"
-
-/*
- * Convert a string to a fixed-point 16-bit value.
- *
- * Ignores `locale' stuff.
- */
-__uint16_t
-_DEFUN (_strtoufix16_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union double_union dbl;
-  unsigned long tmp, tmp2, result;
-  int exp, negexp;
-
-  dbl.d = _strtod_r (rptr, nptr, endptr);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  if (!finite(dbl.d))
-    {
-      if (isnan (dbl.d))
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(dbl) & Sign_bit)
-	return 0;
-      return USHRT_MAX;
-    }
-
-  /* check for normal saturation */
-  if (dbl.d >= 1.0)
-    {
-      rptr->_errno = ERANGE;
-      return USHRT_MAX;
-    }
-  else if (dbl.d < 0)
-    {
-      rptr->_errno = ERANGE;
-      return 0;
-    }
-
-  /* otherwise we have normal postive number in range */
-
-  /* strip off exponent */
-  exp = ((word0(dbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 16)
-    return 0;
-  /* add in implicit normalized bit */
-  tmp = word0(dbl) | Exp_msk1;
-  /* remove exponent and sign */
-  tmp <<= Ebits;
-  /* perform rounding */
-  tmp2 = tmp + (1 << (negexp + 14));
-  result = tmp2 >> (negexp + 15);
-  /* if rounding causes carry, must add carry bit in */
-  if (tmp2 < tmp)
-    {
-      if (negexp == 0)
-	{
-	  /* we have overflow which means saturation */
-	  rptr->_errno = ERANGE;
-	  return USHRT_MAX;
-	}
-      result |= (1 << (16 - negexp));
-    }
-
-  return (__uint16_t)result;
-}
-
-#ifndef _REENT_ONLY
-
-__uint16_t
-_DEFUN (strtoufix16, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtoufix16_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtoufix32.c b/newlib/libc/machine/powerpc/strtoufix32.c
deleted file mode 100644
index 6a8e0812f..000000000
--- a/newlib/libc/machine/powerpc/strtoufix32.c
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifdef __SPE__ 
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "vfieeefp.h"
-
-/*
- * Convert a string to a fixed-point 32-bit value.
- *
- * Ignores `locale' stuff.
- */
-__uint32_t
-_DEFUN (_strtoufix32_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union double_union dbl;
-  int exp, negexp;
-  __uint32_t tmp, tmp2, result = 0;
-
-  dbl.d = _strtod_r (rptr, nptr, endptr);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  if (!finite(dbl.d))
-    {
-      if (isnan (dbl.d))
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(dbl) & Sign_bit)
-	return 0;
-      return ULONG_MAX;
-    }
-
-  /* check for normal saturation */
-  if (dbl.d >= 1.0)
-    {
-      rptr->_errno = ERANGE;
-      return ULONG_MAX;
-    }
-  else if (dbl.d < 0)
-    {
-      rptr->_errno = ERANGE;
-      return 0;
-    }
-
-  /* otherwise we have normal positive number in range */
-
-  /* strip off exponent */
-  exp = ((word0(dbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 32)
-    return 0;
-  word0(dbl) &= ~(Exp_mask | Sign_bit);
-  /* add in implicit normalized bit */
-  word0(dbl) |= Exp_msk1;
-  /* shift so result is contained left-justified in word */
-  tmp = word0(dbl) << Ebits;
-  tmp |= ((unsigned long)word1(dbl) >> (32 - Ebits));
-  /* perform rounding */
-  if (negexp > 1)
-    {
-      tmp2 = tmp + (1 << (negexp - 2));
-      result = (tmp2 >> (negexp - 1));
-      /* if rounding causes carry, add carry bit in */
-      if (tmp2 < tmp)
-	result += 1 << (32 - negexp);
-    }
-  else
-    {
-      result = tmp + ((word1(dbl) & (1 << (32 - Ebits - 1))) != 0);
-      /* if rounding causes carry, then saturation has occurred */
-      if (result < tmp)
-	{
-	  rptr->_errno = ERANGE;
-	  return ULONG_MAX;
-	}
-    }
-
-  return result;
-}
-
-#ifndef _REENT_ONLY
-
-__uint32_t
-_DEFUN (strtoufix32, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtoufix32_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/strtoufix64.c b/newlib/libc/machine/powerpc/strtoufix64.c
deleted file mode 100644
index 539f953a4..000000000
--- a/newlib/libc/machine/powerpc/strtoufix64.c
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "fix64.h"
-
-/*
- * Convert a string to a fixed-point 64-bit unsigned value.
- *
- * Ignores `locale' stuff.
- */
-__uint64_t
-_DEFUN (_strtoufix64_r, (rptr, nptr, endptr),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr)
-{
-  union long_double_union ldbl;
-  int exp, sign, negexp, ld_type;
-  __uint64_t tmp, tmp2, result = 0;
-
-  init(ldbl);
-
-  _simdstrtold ((char *)nptr, endptr, &ldbl);
-
-  /* treat NAN as domain error, +/- infinity as saturation */
-  ld_type = _simdldcheck (&ldbl);
-  if (ld_type != 0)
-    {
-      if (ld_type == 1)
-	{
-	  rptr->_errno = EDOM;
-	  return 0;
-	}
-      rptr->_errno = ERANGE;
-      if (word0(ldbl) & Sign_bit)
-	return 0;
-      return ULONG_LONG_MAX;
-    }
-
-  /* strip off sign and exponent */
-  sign = word0(ldbl) & Sign_bit;
-  exp = ((word0(ldbl) & Exp_mask) >> Exp_shift) - Bias;
-  negexp = -exp;
-  if (negexp > 63)
-    return 0;
-  word0(ldbl) &= ~(Exp_mask | Sign_bit);
-  /* add in implicit normalized bit */
-  word0(ldbl) |= Exp_msk1;
-  /* shift so result is contained in single word */
-  tmp = word0(ldbl) << Ebits;
-  tmp |= ((unsigned long)word1(ldbl) >> (32 - Ebits));
-  tmp <<= 32;
-  if (Ebits < 32)
-    tmp |= ((unsigned long)word1(ldbl) << Ebits);
-  tmp |= ((unsigned long)word2(ldbl) >> (32 - Ebits));
-
-  /* check for saturation */
-  if (sign)
-    {
-      rptr->_errno = ERANGE;
-      return 0;
-    }
-  else
-    {
-      if (exp > 0 || (exp == 0 && tmp >= 0x8000000000000000LL))
-	{
-	  rptr->_errno = ERANGE;
-	  return ULONG_LONG_MAX;
-	}
-    }
-
-  /* otherwise we have normal number in range */
-  if (negexp > 1)
-    {
-      tmp2 = tmp + (1 << (negexp - 2));
-      result = (tmp2 >> (negexp - 1));
-      /* if rounding causes carry, add carry bit in */
-      if (tmp2 < tmp)
-	result += 1 << (64 - negexp);
-    }
-  else
-    {
-      if (Ebits < 32)
-	{
-	  result = tmp + ((word2(ldbl) & (1 << (32 - Ebits - 1))) != 0);
-	  /* if rounding causes carry, then saturation has occurred */
-	  if (result < tmp)
-	    {
-	      rptr->_errno = ERANGE;
-	      return ULONG_LONG_MAX;
-	    }
-	}
-      else
-	result = tmp;
-    }
-
-  return result;
-}
-
-#ifndef _REENT_ONLY
-
-__uint64_t
-_DEFUN (strtoufix64, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr)
-{
-  return _strtoufix64_r (_REENT, s, ptr);
-}
-
-#endif
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/times.c b/newlib/libc/machine/powerpc/times.c
deleted file mode 100644
index 64f4ddcb8..000000000
--- a/newlib/libc/machine/powerpc/times.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Time support routines for PowerPC.
- *
- * Written by Aldy Hernandez.
- */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <sys/time.h>
-#include <sys/times.h>
-#include <sys/resource.h>
-
-clock_t
-times (struct tms *tp)
-{
-  struct rusage usage;
-  union {
-    struct rusage r;
-    /* Newlib's rusage has only 2 fields.  We need to make room for
-       when we call the system's rusage.  This should be enough.  */
-    int filler[32];
-  } host_ru;
-
-  getrusage (RUSAGE_SELF, (void *)&host_ru);
-
-  if (tp)
-    {
-      tp->tms_utime = host_ru.r.ru_utime.tv_sec * 1000
-	+ host_ru.r.ru_utime.tv_usec;
-      tp->tms_stime = host_ru.r.ru_stime.tv_sec * 1000
-	+ host_ru.r.ru_stime.tv_usec;
-      tp->tms_cutime = 0;	/* user time, children */
-      tp->tms_cstime = 0;	/* system time, children */
-    }
-
-  return tp->tms_utime;
-}
diff --git a/newlib/libc/machine/powerpc/ufix64toa.c b/newlib/libc/machine/powerpc/ufix64toa.c
deleted file mode 100644
index 450e0a352..000000000
--- a/newlib/libc/machine/powerpc/ufix64toa.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* _ufix64toa_r: convert unsigned 64-bit fixed point to ASCII string.
- *
- * This routine converts an unsigned fixed-point number to long double format and
- * then calls _ldtoa_r to do the conversion.
- *
- * Written by Jeff Johnston.
- */
-
-#ifdef __SPE__
-
-#include <_ansi.h>
-#include <limits.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-#include "fix64.h"
-
-extern char *_simdldtoa_r _PARAMS((struct _reent *, LONG_DOUBLE_UNION *, int,
-			       int, int *, int *, char **));
-
-/*
- * Convert an unsigned fixed-point 64-bit value to string.
- *
- * Ignores `locale' stuff.
- */
-
-char *
-_DEFUN (_ufix64toa_r, (rptr, value, mode, ndigits, decpt, sign, rve),
-	struct _reent *rptr _AND
-	__uint64_t value _AND
-	int mode _AND
-	int ndigits _AND
-	int *decpt _AND
-	int *sign _AND
-	char **rve)
-{
-  union long_double_union ldbl;
-  union fix64_union fix64;
-  unsigned long tmp;
-  int exp, negexp;
-
-  /* if input is 0, no additional work is needed */
-  if (value == 0)
-    {
-      ldbl.i[0] = ldbl.i[1] = ldbl.i[2] = ldbl.i[3] = 0;
-    }
-  else /* otherwise, we calculate long double equivalent of value */
-    {
-      /* find exponent by locating most-significant one-bit */
-      fix64.ll = value;
-      negexp = 1;
-      if (hiword(fix64) == 0)
-	{
-	  tmp = loword(fix64);
-	  negexp = 33;
-	}
-      else
-	{
-	  tmp = hiword(fix64);
-	  negexp = 1;
-	}
-
-      while (negexp < 65)
-	{
-	  if (tmp & 0x80000000)
-	    break;
-	  ++negexp;
-	  tmp <<= 1;
-	}
-      
-      /* shift input appropriately */
-      fix64.ll = value << (negexp - 1 + (Exp_msk1 != 0));
-      
-      /* build long double */
-      exp = -negexp + Bias;
-      word0(ldbl) = (exp << Exp_shift);
-      word1(ldbl) = hiword(fix64) << (32-Ebits-1);
-      word2(ldbl) = loword(fix64) << (32-Ebits-1);
-      word3(ldbl) = 0;
-      if (Ebits+1 < 32)
-	{
-	  word0(ldbl) |= hiword(fix64) >> (Ebits + 1);
-	  word1(ldbl) |= loword(fix64) >> (Ebits + 1);
-	}
-    }
-
-  /* convert long double to character */
-  return _simdldtoa_r (rptr, &ldbl, mode, ndigits, decpt, sign, rve);
-}
-
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/vec_calloc.c b/newlib/libc/machine/powerpc/vec_calloc.c
deleted file mode 100644
index 5efe91049..000000000
--- a/newlib/libc/machine/powerpc/vec_calloc.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-FUNCTION
-<<vec_calloc>>---allocate space for arrays
-
-INDEX
-	vec_calloc
-
-INDEX
-	_vec_calloc_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void *vec_calloc(size_t <[n]>, size_t <[s]>);
-	void *vec_calloc_r(void *<[reent]>, size_t <n>, <size_t> <[s]>);
-	
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *vec_calloc(<[n]>, <[s]>)
-	size_t <[n]>, <[s]>;
-
-	char *_vec_calloc_r(<[reent]>, <[n]>, <[s]>)
-	char *<[reent]>;
-	size_t <[n]>;
-	size_t <[s]>;
-
-
-
-DESCRIPTION
-Use <<vec_calloc>> to request a block of memory sufficient to hold an
-array of <[n]> elements, each of which has size <[s]>.
-
-The memory allocated by <<vec_calloc>> comes out of the same memory pool
-used by <<vec_malloc>>, but the memory block is initialized to all zero
-bytes.  (To avoid the overhead of initializing the space, use
-<<vec_malloc>> instead.)
-
-The alternate function <<_vec_calloc_r>> is reentrant.
-The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-If successful, a pointer to the newly allocated space.
-
-If unsuccessful, <<NULL>>.
-
-PORTABILITY
-<<vec_calloc>> is an non-ANSI extension described in the AltiVec Programming
-Interface Manual.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <string.h>
-#include <stdlib.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (vec_calloc, (n, size),
-	size_t n _AND
-	size_t size)
-{
-  return _vec_calloc_r (_REENT, n, size);
-}
-
-#endif
diff --git a/newlib/libc/machine/powerpc/vec_free.c b/newlib/libc/machine/powerpc/vec_free.c
deleted file mode 100644
index b55c52dde..000000000
--- a/newlib/libc/machine/powerpc/vec_free.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* vec_free.c - a wrapper for _free_r */
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-
-#ifndef _REENT_ONLY
-
-void
-_DEFUN (vec_free, (aptr),
-        _PTR aptr)
-{
-  _free_r (_REENT, aptr);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/machine/powerpc/vec_malloc.c b/newlib/libc/machine/powerpc/vec_malloc.c
deleted file mode 100644
index 6bcad59b6..000000000
--- a/newlib/libc/machine/powerpc/vec_malloc.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
-FUNCTION
-<<vec_malloc>>, <<vec_realloc>>, <<vec_free>>---manage vector memory
-
-INDEX
-	vec_malloc
-INDEX
-	vec_realloc
-INDEX
-	vec_free
-INDEX
-	_vec_malloc_r
-INDEX
-	_vec_realloc_r
-INDEX
-	_vec_free_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void *vec_malloc(size_t <[nbytes]>);
-	void *vec_realloc(void *<[aptr]>, size_t <[nbytes]>);
-	void vec_free(void *<[aptr]>);
-
-
-	void *_vec_malloc_r(void *<[reent]>, size_t <[nbytes]>);
-	void *_vec_realloc_r(void *<[reent]>, 
-                         void *<[aptr]>, size_t <[nbytes]>);
-	void _vec_free_r(void *<[reent]>, void *<[aptr]>);
-
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *vec_malloc(<[nbytes]>)
-	size_t <[nbytes]>;
-
-	char *vec_realloc(<[aptr]>, <[nbytes]>)
-	char *<[aptr]>;
-	size_t <[nbytes]>;
-
-	void vec_free(<[aptr]>)
-	char *<[aptr]>;
-
-	char *_vec_malloc_r(<[reent]>,<[nbytes]>)
-	char *<[reent]>;
-	size_t <[nbytes]>;
-
-	char *_vec_realloc_r(<[reent]>, <[aptr]>, <[nbytes]>)
-	char *<[reent]>;
-	char *<[aptr]>;
-	size_t <[nbytes]>;
-
-	void _vec_free_r(<[reent]>, <[aptr]>)
-	char *<[reent]>;
-	char *<[aptr]>;
-
-DESCRIPTION
-These functions manage a pool of system memory that is 16-byte aligned..
-
-Use <<vec_malloc>> to request allocation of an object with at least
-<[nbytes]> bytes of storage available and is 16-byte aligned.  If the space is 
-available, <<vec_malloc>> returns a pointer to a newly allocated block as its result.
-
-If you already have a block of storage allocated by <<vec_malloc>>, but
-you no longer need all the space allocated to it, you can make it
-smaller by calling <<vec_realloc>> with both the object pointer and the
-new desired size as arguments.  <<vec_realloc>> guarantees that the
-contents of the smaller object match the beginning of the original object.
-
-Similarly, if you need more space for an object, use <<vec_realloc>> to
-request the larger size; again, <<vec_realloc>> guarantees that the
-beginning of the new, larger object matches the contents of the
-original object.
-
-When you no longer need an object originally allocated by <<vec_malloc>>
-or <<vec_realloc>> (or the related function <<vec_calloc>>), return it to the
-memory storage pool by calling <<vec_free>> with the address of the object
-as the argument.  You can also use <<vec_realloc>> for this purpose by
-calling it with <<0>> as the <[nbytes]> argument.
-
-The alternate functions <<_vec_malloc_r>>, <<_vec_realloc_r>>, <<_vec_free_r>>,
-are reentrant versions.  The extra argument <[reent]> is a pointer to a reentrancy 
-structure.
-
-If you have multiple threads of execution which may call any of these
-routines, or if any of these routines may be called reentrantly, then
-you must provide implementations of the <<__vec_malloc_lock>> and
-<<__vec_malloc_unlock>> functions for your system.  See the documentation
-for those functions.
-
-These functions operate by calling the function <<_sbrk_r>> or
-<<sbrk>>, which allocates space.  You may need to provide one of these
-functions for your system.  <<_sbrk_r>> is called with a positive
-value to allocate more space, and with a negative value to release
-previously allocated space if it is no longer required.
-@xref{Stubs}.
-
-RETURNS
-<<vec_malloc>> returns a pointer to the newly allocated space, if
-successful; otherwise it returns <<NULL>>.  If your application needs
-to generate empty objects, you may use <<vec_malloc(0)>> for this purpose.
-
-<<vec_realloc>> returns a pointer to the new block of memory, or <<NULL>>
-if a new block could not be allocated.  <<NULL>> is also the result
-when you use `<<vec_realloc(<[aptr]>,0)>>' (which has the same effect as
-`<<vec_free(<[aptr]>)>>').  You should always check the result of
-<<vec_realloc>>; successful vec_reallocation is not guaranteed even when
-you request a smaller object.
-
-<<vec_free>> does not return a result.
-
-PORTABILITY
-<<vec_malloc>>, <<vec_realloc>>, and <<vec_free>> are all extensions
-specified in the AltiVec Programming Interface Manual.
-
-Supporting OS subroutines required: <<sbrk>>.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (vec_malloc, (nbytes),
-	size_t nbytes)		/* get a block */
-{
-  return _memalign_r (_REENT, 16, nbytes);
-}
-
-#endif
-
diff --git a/newlib/libc/machine/powerpc/vec_mallocr.c b/newlib/libc/machine/powerpc/vec_mallocr.c
deleted file mode 100644
index c375c8be2..000000000
--- a/newlib/libc/machine/powerpc/vec_mallocr.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/* This code is based on mallocr.c written by Doug Lea which is released
-   to the public domain.  Any changes to libc/stdlib/mallocr.c
-   should be reflected here as well.    */
-
-/* Preliminaries */
-
-#ifndef __STD_C
-#ifdef __STDC__
-#define __STD_C     1
-#else
-#if __cplusplus
-#define __STD_C     1
-#else
-#define __STD_C     0
-#endif /*__cplusplus*/
-#endif /*__STDC__*/
-#endif /*__STD_C*/
-
-#ifndef Void_t
-#if __STD_C
-#define Void_t      void
-#else
-#define Void_t      char
-#endif
-#endif /*Void_t*/
-
-#if __STD_C
-#include <stddef.h>   /* for size_t */
-#else
-#include <sys/types.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <sys/config.h>
-
-/*
-  In newlib, all the publically visible routines take a reentrancy
-  pointer.  We don't currently do anything much with it, but we do
-  pass it to the lock routine.
- */
-
-#include <reent.h>
-#include <string.h>
-#include <malloc.h>
-
-#define MALLOC_LOCK __malloc_lock(reent_ptr)
-#define MALLOC_UNLOCK __malloc_unlock(reent_ptr)
-
-#ifdef SMALL_MEMORY
-#define malloc_getpagesize (128)
-#else
-#define malloc_getpagesize (4096)
-#endif
-
-#if __STD_C
-extern void __malloc_lock(struct _reent *);
-extern void __malloc_unlock(struct _reent *);
-#else
-extern void __malloc_lock();
-extern void __malloc_unlock();
-#endif
-
-#if __STD_C
-#define RARG struct _reent *reent_ptr,
-#define RONEARG struct _reent *reent_ptr
-#else
-#define RARG reent_ptr
-#define RONEARG reent_ptr
-#define RDECL struct _reent *reent_ptr;
-#endif
-
-#define RCALL reent_ptr,
-#define RONECALL reent_ptr
-
-/*
-   Define MALLOC_LOCK and MALLOC_UNLOCK to C expressions to run to
-   lock and unlock the malloc data structures.  MALLOC_LOCK may be
-   called recursively.
- */
-
-#ifndef MALLOC_LOCK
-#define MALLOC_LOCK
-#endif
-
-#ifndef MALLOC_UNLOCK
-#define MALLOC_UNLOCK
-#endif
-
-/*
-  INTERNAL_SIZE_T is the word-size used for internal bookkeeping
-  of chunk sizes. On a 64-bit machine, you can reduce malloc
-  overhead by defining INTERNAL_SIZE_T to be a 32 bit `unsigned int'
-  at the expense of not being able to handle requests greater than
-  2^31. This limitation is hardly ever a concern; you are encouraged
-  to set this. However, the default version is the same as size_t.
-*/
-
-#ifndef INTERNAL_SIZE_T
-#define INTERNAL_SIZE_T size_t
-#endif
-
-/*
-  Following is needed on implementations whereby long > size_t.
-  The problem is caused because the code performs subtractions of
-  size_t values and stores the result in long values.  In the case
-  where long > size_t and the first value is actually less than
-  the second value, the resultant value is positive.  For example,
-  (long)(x - y) where x = 0 and y is 1 ends up being 0x00000000FFFFFFFF
-  which is 2*31 - 1 instead of 0xFFFFFFFFFFFFFFFF.  This is due to the
-  fact that assignment from unsigned to signed won't sign extend.
-*/
-
-#ifdef SIZE_T_SMALLER_THAN_LONG
-#define long_sub_size_t(x, y) ( (x < y) ? -((long)(y - x)) : (x - y) );
-#else
-#define long_sub_size_t(x, y) ( (long)(x - y) )
-#endif
-
-/*
-  REALLOC_ZERO_BYTES_FREES should be set if a call to
-  realloc with zero bytes should be the same as a call to free.
-  Some people think it should. Otherwise, since this malloc
-  returns a unique pointer for malloc(0), so does realloc(p, 0). 
-*/
-
-/* The following macros are only invoked with (2n+1)-multiples of
-   INTERNAL_SIZE_T units, with a positive integer n. This is exploited
-   for fast inline execution when n is small. */
-
-#define MALLOC_ZERO(charp, nbytes)                                            \
-do {                                                                          \
-  INTERNAL_SIZE_T mzsz = (nbytes);                                            \
-  if(mzsz <= 9*sizeof(mzsz)) {                                                \
-    INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp);                         \
-    if(mzsz >= 5*sizeof(mzsz)) {     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-      if(mzsz >= 7*sizeof(mzsz)) {   *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-        if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0;                               \
-                                     *mz++ = 0; }}}                           \
-                                     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-                                     *mz   = 0;                               \
-  } else memset((charp), 0, mzsz);                                            \
-} while(0)
-
-#define MALLOC_COPY(dest,src,nbytes)                                          \
-do {                                                                          \
-  INTERNAL_SIZE_T mcsz = (nbytes);                                            \
-  if(mcsz <= 9*sizeof(mcsz)) {                                                \
-    INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src);                        \
-    INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest);                       \
-    if(mcsz >= 5*sizeof(mcsz)) {     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-      if(mcsz >= 7*sizeof(mcsz)) {   *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-        if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++; }}}                 \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst   = *mcsrc  ;                     \
-  } else memcpy(dest, src, mcsz);                                             \
-} while(0)
-
-#define vECCALLOc	_vec_calloc_r
-#define fREe		_free_r
-#define mEMALIGn	_memalign_r
-#define vECREALLOc	_vec_realloc_r
-#
-#if __STD_C
-
-Void_t* vECREALLOc(RARG Void_t*, size_t);
-Void_t* vECCALLOc(RARG size_t, size_t);
-#else
-Void_t* vECREALLOc();
-Void_t* vECCALLOc();
-#endif
-
-
-#ifdef __cplusplus
-};  /* end of extern "C" */
-#endif
-
-/*
-  Type declarations
-*/
-
-struct malloc_chunk
-{
-  INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
-  INTERNAL_SIZE_T size;      /* Size in bytes, including overhead. */
-  struct malloc_chunk* fd;   /* double links -- used only if free. */
-  struct malloc_chunk* bk;
-};
-
-typedef struct malloc_chunk* mchunkptr;
-
-/*  sizes, alignments */
-
-#define SIZE_SZ                (sizeof(INTERNAL_SIZE_T))
-#define MALLOC_ALIGN           16
-#define MALLOC_ALIGNMENT       16
-#define MALLOC_ALIGN_MASK      (MALLOC_ALIGNMENT - 1)
-#define MINSIZE                (sizeof(struct malloc_chunk))
-
-/* conversion from malloc headers to user pointers, and back */
-
-#define chunk2mem(p)   ((Void_t*)((char*)(p) + 2*SIZE_SZ))
-#define mem2chunk(mem) ((mchunkptr)((char*)(mem) - 2*SIZE_SZ))
-/* pad request bytes into a usable size */
-
-#define request2size(req) \
- (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
-  (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? ((MINSIZE + MALLOC_ALIGN_MASK) & ~(MALLOC_ALIGN_MASK)) : \
-   (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK)))
-
-
-/* Check if m has acceptable alignment */
-
-#define aligned_OK(m)    (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0)
-
-/* 
-  Physical chunk operations  
-*/
-
-
-/* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */
-
-#define PREV_INUSE 0x1 
-
-/* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */
-
-#define IS_MMAPPED 0x2
-
-/* Bits to mask off when extracting size */
-
-#define SIZE_BITS (PREV_INUSE|IS_MMAPPED)
-
-
-/* Ptr to next physical malloc_chunk. */
-
-#define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->size & ~PREV_INUSE) ))
-
-/* Ptr to previous physical malloc_chunk */
-
-#define prev_chunk(p)\
-   ((mchunkptr)( ((char*)(p)) - ((p)->prev_size) ))
-
-
-/* Treat space at ptr + offset as a chunk */
-
-#define chunk_at_offset(p, s)  ((mchunkptr)(((char*)(p)) + (s)))
-
-
-
-
-/* 
-  Dealing with use bits 
-*/
-
-/* extract p's inuse bit */
-
-#define inuse(p)\
-((((mchunkptr)(((char*)(p))+((p)->size & ~PREV_INUSE)))->size) & PREV_INUSE)
-
-/* extract inuse bit of previous chunk */
-
-#define prev_inuse(p)  ((p)->size & PREV_INUSE)
-
-/* check for mmap()'ed chunk */
-
-#define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED)
-
-/* set/clear chunk as in use without otherwise disturbing */
-
-#define set_inuse(p)\
-((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size |= PREV_INUSE
-
-#define clear_inuse(p)\
-((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size &= ~(PREV_INUSE)
-
-/* check/set/clear inuse bits in known places */
-
-#define inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size & PREV_INUSE)
-
-#define set_inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size |= PREV_INUSE)
-
-#define clear_inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size &= ~(PREV_INUSE))
-
-
-
-/* 
-  Dealing with size fields 
-*/
-
-/* Get size, ignoring use bits */
-
-#define chunksize(p)          ((p)->size & ~(SIZE_BITS))
-
-/* Set size at head, without disturbing its use bit */
-
-#define set_head_size(p, s)   ((p)->size = (((p)->size & PREV_INUSE) | (s)))
-
-/* Set size/use ignoring previous bits in header */
-
-#define set_head(p, s)        ((p)->size = (s))
-
-
-
-#ifdef DEFINE_VECREALLOC
-
-
-#if __STD_C
-Void_t* vECREALLOc(RARG Void_t* oldmem, size_t bytes)
-#else
-Void_t* vECREALLOc(RARG oldmem, bytes) RDECL Void_t* oldmem; size_t bytes;
-#endif
-{
-  INTERNAL_SIZE_T    nb;      /* padded request size */
-
-  mchunkptr oldp;             /* chunk corresponding to oldmem */
-  INTERNAL_SIZE_T    oldsize; /* its size */
-
-  mchunkptr newp;             /* chunk to return */
-  INTERNAL_SIZE_T    newsize; /* its size */
-  Void_t*   newmem;           /* corresponding user mem */
-
-  mchunkptr remainder;        /* holds split off extra space from newp */
-  INTERNAL_SIZE_T  remainder_size;   /* its size */
-
-#ifdef REALLOC_ZERO_BYTES_FREES
-  if (bytes == 0) { fREe(RCALL oldmem); return 0; }
-#endif
-
-
-  /* realloc of null is supposed to be same as malloc */
-  if (oldmem == 0) return mEMALIGn(RCALL 16, bytes);
-
-  MALLOC_LOCK;
-
-  newp    = oldp    = mem2chunk(oldmem);
-  newsize = oldsize = chunksize(oldp);
-
-  nb = request2size(bytes);
-
-  if ((long)(oldsize) < (long)(nb))  
-  {
-    /* Must allocate */
-
-    newmem = mEMALIGn (RCALL 16, bytes);
-
-    if (newmem == 0)  /* propagate failure */
-    {
-      MALLOC_UNLOCK;
-      return 0;
-    }
-
-    /* copy, free, and exit */
-    MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-    fREe(RCALL oldmem);
-    MALLOC_UNLOCK;
-    return newmem;
-  }
-
-  remainder_size = long_sub_size_t(newsize, nb);
-
-  if (remainder_size >= (long)MINSIZE) /* split off remainder */
-  {
-    remainder = chunk_at_offset(newp, nb);
-    set_head_size(newp, nb);
-    set_head(remainder, remainder_size | PREV_INUSE);
-    set_inuse_bit_at_offset(remainder, remainder_size);
-    fREe(RCALL chunk2mem(remainder)); /* let free() deal with it */
-  }
-  else
-  {
-    set_head_size(newp, newsize);
-    set_inuse_bit_at_offset(newp, newsize);
-  }
-
-  MALLOC_UNLOCK;
-  return chunk2mem(newp);
-}
-
-#endif /* DEFINE_VECREALLOC */
-
-
-#ifdef DEFINE_VECCALLOC
-
-/*
-
-  calloc calls malloc, then zeroes out the allocated chunk.
-
-*/
-
-#if __STD_C
-Void_t* vECCALLOc(RARG size_t n, size_t elem_size)
-#else
-Void_t* vECCALLOc(RARG n, elem_size) RDECL size_t n; size_t elem_size;
-#endif
-{
-  INTERNAL_SIZE_T sz = n * elem_size;
-
-  Void_t* mem;
-
-  mem = mEMALIGn (RCALL 16, sz);
-
-  if (mem == 0) 
-  {
-    return 0;
-  }
-
-  MALLOC_ZERO(mem, sz);
-  return mem;
-}
-
-#endif /* DEFINE_VECCALLOC */
-
diff --git a/newlib/libc/machine/powerpc/vec_realloc.c b/newlib/libc/machine/powerpc/vec_realloc.c
deleted file mode 100644
index e192e399d..000000000
--- a/newlib/libc/machine/powerpc/vec_realloc.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* vec_realloc.c -- a wrapper for _vec_realloc_r.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (vec_realloc, (ap, nbytes),
-	_PTR ap _AND
-	size_t nbytes)
-{
-  return _vec_realloc_r (_REENT, ap, nbytes);
-}
-
-#endif
diff --git a/newlib/libc/machine/powerpc/vfprintf.c b/newlib/libc/machine/powerpc/vfprintf.c
deleted file mode 100644
index ff3a4f66b..000000000
--- a/newlib/libc/machine/powerpc/vfprintf.c
+++ /dev/null
@@ -1,1430 +0,0 @@
-/*
-FUNCTION
-<<vprintf>>, <<vfprintf>>, <<vsprintf>>---format argument list
-
-INDEX
-	vprintf
-INDEX
-	vfprintf
-INDEX
-	vsprintf
-INDEX
-	vsnprintf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	#include <stdarg.h>
-	int vprintf(const char *<[fmt]>, va_list <[list]>);
-	int vfprintf(FILE *<[fp]>, const char *<[fmt]>, va_list <[list]>);
-	int vsprintf(char *<[str]>, const char *<[fmt]>, va_list <[list]>);
-	int vsnprintf(char *<[str]>, size_t <[size]>, const char *<[fmt]>, va_list <[list]>);
-
-	int _vprintf_r(void *<[reent]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vfprintf_r(void *<[reent]>, FILE *<[fp]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vsprintf_r(void *<[reent]>, char *<[str]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vsnprintf_r(void *<[reent]>, char *<[str]>, size_t <[size]>, const char *<[fmt]>,
-                        va_list <[list]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	#include <varargs.h>
-	int vprintf( <[fmt]>, <[list]>)
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vfprintf(<[fp]>, <[fmt]>, <[list]>)
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vsprintf(<[str]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vsnprintf(<[str]>, <[size]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-        size_t <[size]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vprintf_r(<[reent]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vfprintf_r(<[reent]>, <[fp]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vsprintf_r(<[reent]>, <[str]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vsnprintf_r(<[reent]>, <[str]>, <[size]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-        size_t <[size]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-DESCRIPTION
-<<vprintf>>, <<vfprintf>>, <<vsprintf>> and <<vsnprintf>> are (respectively)
-variants of <<printf>>, <<fprintf>>, <<sprintf>> and <<snprintf>>.  They differ
-only in allowing their caller to pass the variable argument list as a
-<<va_list>> object (initialized by <<va_start>>) rather than directly
-accepting a variable number of arguments.
-
-RETURNS
-The return values are consistent with the corresponding functions:
-<<vsprintf>> returns the number of bytes in the output string,
-save that the concluding <<NULL>> is not counted.
-<<vprintf>> and <<vfprintf>> return the number of characters transmitted.
-If an error occurs, <<vprintf>> and <<vfprintf>> return <<EOF>>. No
-error returns occur for <<vsprintf>>.
-
-PORTABILITY
-ANSI C requires all three functions.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Chris Torek.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-/*static char *sccsid = "from: @(#)vfprintf.c	5.50 (Berkeley) 12/16/92";*/
-static char *rcsid = "$Id$";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Actual printf innards.
- *
- * This code is large and complicated...
- */
-
-#ifdef INTEGER_ONLY
-#define VFPRINTF vfiprintf
-#define _VFPRINTF_R _vfiprintf_r
-#else
-#define VFPRINTF vfprintf
-#define _VFPRINTF_R _vfprintf_r
-#ifndef NO_FLOATING_POINT
-#define FLOATING_POINT
-#endif
-#endif
-
-#define _NO_LONGLONG
-#if defined WANT_PRINTF_LONG_LONG && defined __GNUC__
-# undef _NO_LONGLONG
-#endif
-
-#include <_ansi.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <reent.h>
-#include <wchar.h>
-#include <string.h>
-#ifdef __ALTIVEC__
-#include <altivec.h>
-#endif
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#include "local.h"
-#include "fvwrite.h"
-#include "vfieeefp.h"
-
-/* Currently a test is made to see if long double processing is warranted.
-   This could be changed in the future should the _ldtoa_r code be
-   preferred over _dtoa_r.  */
-#define _NO_LONGDBL
-#if defined WANT_IO_LONG_DBL && (LDBL_MANT_DIG > DBL_MANT_DIG)
-#undef _NO_LONGDBL
-#endif
-
-#ifdef __ALTIVEC__
-typedef union
-{
-  vector int v;
-  float f[4];
-  int   i[16 / sizeof(int)];
-  long  l[4];
-  short s[8];
-  signed char c[16];
-} vec_16_byte_union;
-#endif /* __ALTIVEC__ */
-
-/*
- * Flush out all the vectors defined by the given uio,
- * then reset it so that it can be reused.
- */
-static int
-__sprint(fp, uio)
-	FILE *fp;
-	register struct __suio *uio;
-{
-	register int err;
-
-	if (uio->uio_resid == 0) {
-		uio->uio_iovcnt = 0;
-		return (0);
-	}
-	err = __sfvwrite(fp, uio);
-	uio->uio_resid = 0;
-	uio->uio_iovcnt = 0;
-	return (err);
-}
-
-/*
- * Helper function for `fprintf to unbuffered unix file': creates a
- * temporary buffer.  We only work on write-only files; this avoids
- * worries about ungetc buffers and so forth.
- */
-static int
-__sbprintf(fp, fmt, ap)
-	register FILE *fp;
-	const char *fmt;
-	va_list ap;
-{
-	int ret;
-	FILE fake;
-	unsigned char buf[BUFSIZ];
-
-	/* copy the important variables */
-	fake._data = fp->_data;
-	fake._flags = fp->_flags & ~__SNBF;
-	fake._file = fp->_file;
-	fake._cookie = fp->_cookie;
-	fake._write = fp->_write;
-
-	/* set up the buffer */
-	fake._bf._base = fake._p = buf;
-	fake._bf._size = fake._w = sizeof(buf);
-	fake._lbfsize = 0;	/* not actually used, but Just In Case */
-
-	/* do the work, then copy any error status */
-	ret = VFPRINTF(&fake, fmt, ap);
-	if (ret >= 0 && fflush(&fake))
-		ret = EOF;
-	if (fake._flags & __SERR)
-		fp->_flags |= __SERR;
-	return (ret);
-}
-
-
-#ifdef FLOATING_POINT
-#include <locale.h>
-#include <math.h>
-#include "floatio.h"
-
-#define	BUF		(MAXEXP+MAXFRACT+1)	/* + decimal point */
-#define	DEFPREC		6
-
-#ifdef _NO_LONGDBL
-static char *cvt _PARAMS((struct _reent *, double, int, int, char *, int *, int, int *));
-#else
-static char *cvt _PARAMS((struct _reent *, _LONG_DOUBLE, int, int, char *, int *, int, int *));
-extern int  _ldcheck _PARAMS((_LONG_DOUBLE *));
-#endif
-
-static int exponent _PARAMS((char *, int, int));
-
-#ifdef __SPE__
-static char *cvt_ufix64 _PARAMS((struct _reent *, unsigned long long, int,  int *, int *));
-#endif /* __SPE__ */
-
-#else /* no FLOATING_POINT */
-
-#define	BUF		40
-
-#endif /* FLOATING_POINT */
-
-
-/*
- * Macros for converting digits to letters and vice versa
- */
-#define	to_digit(c)	((c) - '0')
-#define is_digit(c)	((unsigned)to_digit(c) <= 9)
-#define	to_char(n)	((n) + '0')
-
-/*
- * Flags used during conversion.
- */
-#define	ALT		0x001		/* alternate form */
-#define	HEXPREFIX	0x002		/* add 0x or 0X prefix */
-#define	LADJUST		0x004		/* left adjustment */
-#define	LONGDBL		0x008		/* long double */
-#define	LONGINT		0x010		/* long integer */
-#ifndef _NO_LONGLONG
-#define	QUADINT		0x020		/* quad integer */
-#else /* ifdef _NO_LONGLONG, make QUADINT equivalent to LONGINT, so
-	 that %lld behaves the same as %ld, not as %d, as expected if:
-	 sizeof (long long) = sizeof long > sizeof int  */
-#define	QUADINT		LONGINT
-#endif
-#define	SHORTINT	0x040		/* short integer */
-#define	ZEROPAD		0x080		/* zero (as opposed to blank) pad */
-#define FPT		0x100		/* Floating point number */
-#define VECTOR		0x200		/* vector */
-#define FIXEDPOINT	0x400		/* fixed-point */
-
-int 
-_DEFUN (VFPRINTF, (fp, fmt0, ap),
-	FILE * fp _AND
-	_CONST char *fmt0 _AND
-	va_list ap)
-{
-  CHECK_INIT (fp);
-  return _VFPRINTF_R (fp->_data, fp, fmt0, ap);
-}
-
-int 
-_DEFUN (_VFPRINTF_R, (data, fp, fmt0, ap),
-	struct _reent *data _AND
-	FILE * fp _AND
-	_CONST char *fmt0 _AND
-	va_list ap)
-{
-	register char *fmt;	/* format string */
-	register int ch;	/* character from fmt */
-	register int n, m;	/* handy integers (short term usage) */
-	register char *cp;	/* handy char pointer (short term usage) */
-	register struct __siov *iovp;/* for PRINT macro */
-	register int flags;	/* flags as above */
-	int ret;		/* return value accumulator */
-	int width;		/* width from format (%8d), or 0 */
-	int prec;		/* precision from format (%.3d), or -1 */
-	char sign;		/* sign prefix (' ', '+', '-', or \0) */
-	char old_sign;		/* saved value of sign when looping for vectors */
-	int old_ch;		/* saved value of ch when looping for vectors */
-	char *format_anchor;    /* start of format to process */
-	wchar_t wc;
-#ifdef FLOATING_POINT
-	char *decimal_point = localeconv()->decimal_point;
-	char softsign;		/* temporary negative sign for floats */
-#ifdef _NO_LONGDBL
-	union { int i; double d; } _double_ = {0};
-	#define _fpvalue (_double_.d)
-#else
-	union { int i; _LONG_DOUBLE ld; } _long_double_ = {0};
-	#define _fpvalue (_long_double_.ld)
-	int tmp;  
-#endif
-	int expt;		/* integer value of exponent */
-	int expsize = 0;	/* character count for expstr */
-	int ndig;		/* actual number of digits returned by cvt */
-	char expstr[7];		/* buffer for exponent string */
-#endif
-
-#ifndef _NO_LONGLONG
-#define	quad_t	  long long
-#define	u_quad_t  unsigned long long
-#endif
-
-#ifndef _NO_LONGLONG
-	u_quad_t _uquad;	/* integer arguments %[diouxX] */
-#else
-	u_long _uquad;
-#endif
-	enum { OCT, DEC, HEX } base;/* base for [diouxX] conversion */
-	int dprec;		/* a copy of prec if [diouxX], 0 otherwise */
-	int realsz;		/* field size expanded by dprec */
-	int size;		/* size of converted field or string */
-	char *xdigs = NULL;	/* digits for [xX] conversion */
-#define NIOV 8
-	struct __suio uio;	/* output information: summary */
-	struct __siov iov[NIOV];/* ... and individual io vectors */
-	char buf[BUF];		/* space for %c, %[diouxX], %[eEfgG] */
-	char ox[2];		/* space for 0x hex-prefix */
-#ifdef __ALTIVEC__
-	char vec_sep;           /* vector separator char */
-	int vec_print_count;    /* number of vector chunks remaining */
-	vec_16_byte_union vec_tmp;
-#endif /* __ALTIVEC__ */ 
-        mbstate_t state;          /* mbtowc calls from library must not change state */
-
-	/*
-	 * Choose PADSIZE to trade efficiency vs. size.  If larger printf
-	 * fields occur frequently, increase PADSIZE and make the initialisers
-	 * below longer.
-	 */
-#define	PADSIZE	16		/* pad chunk size */
-	static _CONST char blanks[PADSIZE] =
-	 {' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' '};
-	static _CONST char zeroes[PADSIZE] =
-	 {'0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0'};
-
-	/*
-	 * BEWARE, these `goto error' on error, and PAD uses `n'.
-	 */
-#define	PRINT(ptr, len) { \
-	iovp->iov_base = (ptr); \
-	iovp->iov_len = (len); \
-	uio.uio_resid += (len); \
-	iovp++; \
-	if (++uio.uio_iovcnt >= NIOV) { \
-		if (__sprint(fp, &uio)) \
-			goto error; \
-		iovp = iov; \
-	} \
-}
-#define	PAD(howmany, with) { \
-	if ((n = (howmany)) > 0) { \
-		while (n > PADSIZE) { \
-			PRINT(with, PADSIZE); \
-			n -= PADSIZE; \
-		} \
-		PRINT(with, n); \
-	} \
-}
-#define	FLUSH() { \
-	if (uio.uio_resid && __sprint(fp, &uio)) \
-		goto error; \
-	uio.uio_iovcnt = 0; \
-	iovp = iov; \
-}
-
-#ifdef __ALTIVEC__
-#define GET_SHORT(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 8 ? (short)vec_tmp.s[8 - vec_print_count] : \
-	        (vec_tmp.v = va_arg(ap, vector int), (short)vec_tmp.s[0])) : \
-	    (short)va_arg(ap, int))
-#define GET_USHORT(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 8 ? (u_short)vec_tmp.s[8 - vec_print_count] : \
-	        (vec_tmp.v = va_arg(ap, vector int), (u_short)vec_tmp.s[0])) : \
-	    (u_short)va_arg(ap, int))
-
-#define GET_LONG(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 4 ? (long)vec_tmp.l[4 - vec_print_count] : \
-	        (vec_tmp.v = va_arg(ap, vector int), vec_tmp.l[0])) : \
-	    va_arg(ap, long int))
-#define GET_ULONG(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 4 ? (u_long)vec_tmp.l[4 - vec_print_count] : \
-	        (vec_tmp.v = va_arg(ap, vector int), (u_long)vec_tmp.l[0])) : \
-	    (u_long)va_arg(ap, unsigned long int))
-
-#define GET_INT(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 16 ? \
-                vec_tmp.c[16 - vec_print_count] : \
-	        (vec_tmp.v = va_arg(ap, vector int), (int)vec_tmp.c[0])) : \
-	    va_arg(ap, int))
-#define GET_UINT(ap) \
-	(flags&VECTOR ? \
-	    (vec_print_count < 16 ? \
-                (u_int)((unsigned char)vec_tmp.c[16 - vec_print_count]) : \
-	        (vec_tmp.v = va_arg(ap, vector int), (u_int)((unsigned char)vec_tmp.c[0]))) : \
-	    (u_int)va_arg(ap, unsigned int))
-#else /* !__ALTIVEC__ */
-#define GET_SHORT(ap) ((short)va_arg(ap, int))
-#define GET_USHORT(ap) ((u_short)va_arg(ap, int))
-#define GET_LONG(ap) (va_arg(ap, long int))
-#define GET_ULONG(ap) ((u_long)va_arg(ap, unsigned long int))
-#define GET_INT(ap) ((int)va_arg(ap, int))
-#define GET_UINT(ap) ((u_int)va_arg(ap, unsigned int))
-#endif /* !__ALTIVEC__ */
-
-#ifndef _NO_LONGLONG
-#define	SARG() \
-	(flags&QUADINT ? va_arg(ap, quad_t) : \
-	    flags&LONGINT ? GET_LONG(ap) : \
-	    flags&SHORTINT ? (long)GET_SHORT(ap) : \
-	    (long)GET_INT(ap))
-#define	UARG() \
-	(flags&QUADINT ? va_arg(ap, u_quad_t) : \
-	    flags&LONGINT ? GET_ULONG(ap) : \
-	    flags&SHORTINT ? (u_long)GET_USHORT(ap) : \
-	    (u_long)GET_UINT(ap))
-#ifdef __SPE__
-#define	SFPARG() \
-	(flags&LONGINT ? va_arg(ap, quad_t) : \
-	    flags&SHORTINT ? (long)GET_SHORT(ap) : \
-	    (long)va_arg(ap, int))
-#define	UFPARG() \
-	(flags&LONGINT ? va_arg(ap, u_quad_t) : \
-	    flags&SHORTINT ? (u_long)GET_USHORT(ap) : \
-	    (u_long)va_arg(ap, u_int))
-#endif /* __SPE__ */
-#else
-#define	SARG() \
-	(flags&LONGINT ? GET_LONG(ap) : \
-	    flags&SHORTINT ? (long)GET_SHORT(ap) : \
-	    (long)GET_INT(ap))
-#define	UARG() \
-	(flags&LONGINT ? GET_ULONG(ap) : \
-	    flags&SHORTINT ? (u_long)GET_USHORT(ap) : \
-	    (u_long)GET_UINT(ap))
-#ifdef __SPE__
-#define	SFPARG() \
-	(flags&LONGINT ? (va_arg(ap, long) << 32) : \
-	    flags&SHORTINT ? (long)GET_SHORT(ap) : \
-	    (long)va_arg(ap, int))
-#define	UFPARG() \
-	(flags&LONGINT ? (va_arg(ap, u_long) <<32) : \
-	    flags&SHORTINT ? (u_long)GET_USHORT(ap) : \
-	    (u_long)va_arg(ap, u_int))
-#endif /* __SPE__ */
-#endif
-
-        memset (&state, '\0', sizeof (state));
-
-	/* sorry, fprintf(read_only_file, "") returns EOF, not 0 */
-	if (cantwrite(fp))
-		return (EOF);
-
-	/* optimise fprintf(stderr) (and other unbuffered Unix files) */
-	if ((fp->_flags & (__SNBF|__SWR|__SRW)) == (__SNBF|__SWR) &&
-	    fp->_file >= 0)
-		return (__sbprintf(fp, fmt0, ap));
-
-	fmt = (char *)fmt0;
-	uio.uio_iov = iovp = iov;
-	uio.uio_resid = 0;
-	uio.uio_iovcnt = 0;
-	ret = 0;
-
-	/*
-	 * Scan the format for conversions (`%' character).
-	 */
-	for (;;) {
-	        cp = fmt;
-	        while ((n = _mbtowc_r(_REENT, &wc, fmt, MB_CUR_MAX, &state)) > 0) {
-			fmt += n;
-			if (wc == '%') {
-				fmt--;
-				break;
-			}
-		}
-		if ((m = fmt - cp) != 0) {
-			PRINT(cp, m);
-			ret += m;
-		}
-		if (n <= 0)
-			goto done;
-		fmt++;		/* skip over '%' */
-
-		flags = 0;
-		dprec = 0;
-		width = 0;
-		prec = -1;
-		sign = '\0';
-		old_sign = '\0';
-#ifdef __ALTIVEC__
-		vec_print_count = 0;
-		vec_sep = ' ';
-#endif /* __ALTIVEC__ */
-
-		format_anchor = fmt;
-rflag:		ch = *fmt++;
-		old_ch = ch;
-reswitch:	switch (ch) {
-		case ' ':
-			/*
-			 * ``If the space and + flags both appear, the space
-			 * flag will be ignored.''
-			 *	-- ANSI X3J11
-			 */
-			if (!sign)
-				sign = ' ';
-			goto rflag;
-		case '#':
-			flags |= ALT;
-			goto rflag;
-		case '*':
-			/*
-			 * ``A negative field width argument is taken as a
-			 * - flag followed by a positive field width.''
-			 *	-- ANSI X3J11
-			 * They don't exclude field widths read from args.
-			 */
-			if ((width = va_arg(ap, int)) >= 0)
-				goto rflag;
-			width = -width;
-			/* FALLTHROUGH */
-		case '-':
-			flags |= LADJUST;
-			goto rflag;
-		case '+':
-			sign = '+';
-			goto rflag;
-#ifdef __ALTIVEC__
-		case ',':
-		case ';':
-		case ':':
-		case '_':
-		        if (vec_sep != ' ')
-		          {
-		            fmt = format_anchor;
-		            continue;
-		          }
-			vec_sep = ch;
-			goto rflag;
-#endif /* __ALTIVEC__ */
-		case '.':
-			if ((ch = *fmt++) == '*') {
-				n = va_arg(ap, int);
-				prec = n < 0 ? -1 : n;
-				goto rflag;
-			}
-			n = 0;
-			while (is_digit(ch)) {
-				n = 10 * n + to_digit(ch);
-				ch = *fmt++;
-			}
-			prec = n < 0 ? -1 : n;
-			goto reswitch;
-		case '0':
-			/*
-			 * ``Note that 0 is taken as a flag, not as the
-			 * beginning of a field width.''
-			 *	-- ANSI X3J11
-			 */
-			flags |= ZEROPAD;
-			goto rflag;
-		case '1': case '2': case '3': case '4':
-		case '5': case '6': case '7': case '8': case '9':
-			n = 0;
-			do {
-				n = 10 * n + to_digit(ch);
-				ch = *fmt++;
-			} while (is_digit(ch));
-			width = n;
-			goto reswitch;
-#ifdef FLOATING_POINT
-		case 'L':
-#ifdef __ALTIVEC__
-		        if (flags & VECTOR) 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			flags |= LONGDBL;
-			goto rflag;
-#endif
-		case 'h':
-		        if (flags & LONGINT)
-		          {
-		            fmt = format_anchor;
-		            continue;
-		          }
-			flags |= SHORTINT;
-#ifdef __ALTIVEC__
-			if (flags & VECTOR)
-			  vec_print_count = 8;
-#endif
-			goto rflag;
-		case 'l':
-		        if (flags & SHORTINT)
-		          {
-		            fmt = format_anchor;
-		            continue;
-		          }
-			if (*fmt == 'l') {
-				fmt++;
-				flags |= QUADINT;
-				flags &= ~VECTOR;
-			} else {
-				flags |= LONGINT;
-#ifdef __ALTIVEC__
-				if (flags & VECTOR)
-				  vec_print_count = 4;
-#endif
-			}
-			goto rflag;
-#ifdef __ALTIVEC__
-		case 'v':
-		        if (flags & VECTOR) 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-			flags |= VECTOR;
-			vec_print_count = (flags & SHORTINT) ? 8 : 
-			  ((flags & LONGINT) ? 4 : 16);
-			goto rflag;
-#endif
-                case 'q':
-#ifdef __ALTIVEC__
-		        if (flags & VECTOR) 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			flags |= QUADINT;
-			goto rflag;
-		case 'c':
-#ifdef __ALTIVEC__
-			if (flags & VECTOR)
-			  {
-			    int k;
-			    vec_16_byte_union tmp;
-		            if (flags & (SHORTINT | LONGINT))
-		              {
-		                fmt = format_anchor;
-		                continue;
-		              }
-			    tmp.v = va_arg(ap, vector int);
-			    cp = buf;
-			    for (k = 0; k < 15; ++k)
-			      {
-			        *cp++ = tmp.c[k];
-			        if (vec_sep != ' ')
-			          *cp++ = vec_sep;
-			      }
-			    *cp++ = tmp.c[15];
-			    size = cp - buf;
-			    cp = buf;
-			    vec_print_count = 0;
-			  }
-			else
-#endif /* __ALTIVEC__ */
-			  {
-			    *(cp = buf) = va_arg(ap, int);
-			    size = 1;
-			  }
-			sign = '\0';
-			break;
-		case 'D':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'd':
-		case 'i':
-#ifdef __ALTIVEC__
-		        if (!(flags & VECTOR) && vec_sep != ' ') 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			_uquad = SARG();
-#ifndef _NO_LONGLONG
-			if ((quad_t)_uquad < 0)
-#else
-			if ((long) _uquad < 0)
-#endif
-			{
-
-				_uquad = -_uquad;
-				old_sign = sign;
-				sign = '-';
-			}
-			base = DEC;
-			goto number;
-#ifdef FLOATING_POINT
-		case 'e':
-		case 'E':
-		case 'f':
-		case 'g':
-		case 'G':
-			if (prec == -1) {
-				prec = DEFPREC;
-			} else if ((ch == 'g' || ch == 'G') && prec == 0) {
-				prec = 1;
-			}
-
-#ifdef _NO_LONGDBL
-			if (flags & LONGDBL) {
-				_fpvalue = (double) va_arg(ap, _LONG_DOUBLE);
-#ifdef __ALTIVEC__
-			} else if (flags & VECTOR) {
-				if (vec_print_count >= 4)
-                                  {
-                                    vec_print_count = 4;
-				    vec_tmp.v = va_arg(ap, vector int);
-                                  }
-				_fpvalue = (double)vec_tmp.f[4 - vec_print_count];
-			} else if (vec_sep != ' ') {
-			         fmt = format_anchor;
-			         continue;
-			
-#endif /* __ALTIVEC__ */
-			} else {
-				_fpvalue = va_arg(ap, double);
-			}
-
-			/* do this before tricky precision changes */
-			if (isinf(_fpvalue)) {
-				if (_fpvalue < 0)
-				  {
-				    old_sign = sign;
-				    sign = '-';
-				  }
-				    
-				cp = "Inf";
-				size = 3;
-				break;
-			}
-			if (isnan(_fpvalue)) {
-				cp = "NaN";
-				size = 3;
-				break;
-			}
-
-#else /* !_NO_LONGDBL */
-			
-			if (flags & LONGDBL) {
-				_fpvalue = va_arg(ap, _LONG_DOUBLE);
-#ifdef __ALTIVEC__
-			} else if (flags & VECTOR) {
-				if (vec_print_count >= 4)
-                                  {
-                                    vec_print_count = 4;
-				    vec_tmp.v = va_arg(ap, vector int);
-                                  }
-				_fpvalue = (_LONG_DOUBLE)k.f[4 - vec_print_count];
-#endif /* __ALTIVEC__ */
-			} else {
-				_fpvalue = (_LONG_DOUBLE)va_arg(ap, double);
-			}
-
-			/* do this before tricky precision changes */
-			tmp = _ldcheck (&_fpvalue);
-			if (tmp == 2) {
-				if (_fpvalue < 0)
-				  {
-				    old_sign = sign;
-				    sign = '-';
-				  }
-				cp = "Inf";
-				size = 3;
-				break;
-			}
-			if (tmp == 1) {
-				cp = "NaN";
-				size = 3;
-				break;
-			}
-#endif /* !_NO_LONGDBL */
-
-			flags |= FPT;
-
-			cp = cvt(data, _fpvalue, prec, flags, &softsign,
-				&expt, ch, &ndig);
-
-			if (ch == 'g' || ch == 'G') {
-				if (expt <= -4 || expt > prec)
-				  {
-				    old_ch = ch;
-				    ch = (ch == 'g') ? 'e' : 'E';
-				  }
-				else
-					ch = 'g';
-			} 
-			if (ch <= 'e') {	/* 'e' or 'E' fmt */
-				--expt;
-				expsize = exponent(expstr, expt, ch);
-				size = expsize + ndig;
-				if (ndig > 1 || flags & ALT)
-					++size;
-			} else if (ch == 'f') {		/* f fmt */
-				if (expt > 0) {
-					size = expt;
-					if (prec || flags & ALT)
-						size += prec + 1;
-				} else	/* "0.X" */
-					size = prec + 2;
-			} else if (expt >= ndig) {	/* fixed g fmt */
-				size = expt;
-				if (flags & ALT)
-					++size;
-			} else
-				size = ndig + (expt > 0 ?
-					1 : 2 - expt);
-
-			if (softsign)
-			  {
-			    old_sign = sign;
-			    sign = '-';
-			  }
-			break;
-#endif /* FLOATING_POINT */
-#ifdef __SPE__
-                case 'r':
-		        flags |= FIXEDPOINT;
-	     	        _uquad = SFPARG();
-			if ((quad_t)_uquad < 0)
-			  {
-			    sign = '-';
-			    _uquad = -(quad_t)_uquad;
-			  }
-			if (flags & SHORTINT)
-			  _uquad <<= 49;
-			else if (flags & LONGINT)
-			  _uquad <<= 1;
-			else
-			  _uquad <<= 33;
-
-			if (_uquad == 0 && sign)
-			  {
-			    /* we have -1.0 which has to be handled special */
-			    cp = "100000";
-			    expt = 1;
-			    ndig = 6;
-			    break;
-			  }
-
-			goto fixed_nosign;
-                case 'R':
-		        flags |= FIXEDPOINT;
-		        _uquad = UFPARG();
-			if (flags & SHORTINT)
-			  _uquad <<= 48;
-			else if (!(flags & LONGINT))
-			  _uquad <<= 32;
-	
-fixed_nosign:
-			if (prec == -1)
-			  prec = DEFPREC;
-
-			cp = cvt_ufix64 (data, _uquad, prec, &expt, &ndig);
-
-			/* act like %f of format "0.X" */
-			size = prec + 2;
-
-                        break;
-#endif /* __SPE__ */
-		case 'n':
-#ifdef __ALTIVEC__
-		        if (flags & VECTOR)
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-#ifndef _NO_LONGLONG
-			if (flags & QUADINT)
-				*va_arg(ap, quad_t *) = ret;
-			else 
-#endif
-			if (flags & LONGINT)
-				*va_arg(ap, long *) = ret;
-			else if (flags & SHORTINT)
-				*va_arg(ap, short *) = ret;
-			else
-				*va_arg(ap, int *) = ret;
-			continue;	/* no output */
-		case 'O':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'o':
-#ifdef __ALTIVEC__
-		        if (!(flags & VECTOR) && vec_sep != ' ') 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			_uquad = UARG();
-			base = OCT;
-			goto nosign;
-		case 'p':
-			/*
-			 * ``The argument shall be a pointer to void.  The
-			 * value of the pointer is converted to a sequence
-			 * of printable characters, in an implementation-
-			 * defined manner.''
-			 *	-- ANSI X3J11
-			 */
-			/* NOSTRICT */
-#ifdef __ALTIVEC__
-		        if (flags & VECTOR)
-		          _uquad = UARG();
-		        else if (vec_sep != ' ')
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-			else
-#endif /* __ALTIVEC__ */
-		          _uquad = (u_long)(unsigned _POINTER_INT)va_arg(ap, void *);
-			base = HEX;
-			xdigs = "0123456789abcdef";
-			flags |= HEXPREFIX;
-			ch = 'x';
-			goto nosign;
-		case 's':
-#ifdef __ALTIVEC__
-		        if (flags & VECTOR)
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			if ((cp = va_arg(ap, char *)) == NULL)
-				cp = "(null)";
-			if (prec >= 0) {
-				/*
-				 * can't use strlen; can only look for the
-				 * NUL in the first `prec' characters, and
-				 * strlen() will go further.
-				 */
-				char *p = memchr(cp, 0, prec);
-
-				if (p != NULL) {
-					size = p - cp;
-					if (size > prec)
-						size = prec;
-				} else
-					size = prec;
-			} else
-				size = strlen(cp);
-			sign = '\0';
-			break;
-		case 'U':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'u':
-#ifdef __ALTIVEC__
-		        if (!(flags & VECTOR) && vec_sep != ' ') 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-			_uquad = UARG();
-			base = DEC;
-			goto nosign;
-		case 'X':
-			xdigs = "0123456789ABCDEF";
-			goto hex;
-		case 'x':
-			xdigs = "0123456789abcdef";
-#ifdef __ALTIVEC__
-		        if (!(flags & VECTOR) && vec_sep != ' ') 
-			  {
-			    fmt = format_anchor;
-			    continue;
-			  }
-#endif /* __ALTIVEC__ */
-hex:			_uquad = UARG();
-			base = HEX;
-			/* leading 0x/X only if non-zero */
-			if (flags & ALT && _uquad != 0)
-				flags |= HEXPREFIX;
-
-			/* unsigned conversions */
-nosign:			sign = '\0';
-			/*
-			 * ``... diouXx conversions ... if a precision is
-			 * specified, the 0 flag will be ignored.''
-			 *	-- ANSI X3J11
-			 */
-number:			if ((dprec = prec) >= 0)
-				flags &= ~ZEROPAD;
-
-			/*
-			 * ``The result of converting a zero value with an
-			 * explicit precision of zero is no characters.''
-			 *	-- ANSI X3J11
-			 */
-			cp = buf + BUF;
-			if (_uquad != 0 || prec != 0) {
-				/*
-				 * Unsigned mod is hard, and unsigned mod
-				 * by a constant is easier than that by
-				 * a variable; hence this switch.
-				 */
-				switch (base) {
-				case OCT:
-					do {
-						*--cp = to_char(_uquad & 7);
-						_uquad >>= 3;
-					} while (_uquad);
-					/* handle octal leading 0 */
-					if (flags & ALT && *cp != '0')
-						*--cp = '0';
-					break;
-
-				case DEC:
-					/* many numbers are 1 digit */
-					while (_uquad >= 10) {
-						*--cp = to_char(_uquad % 10);
-						_uquad /= 10;
-					}
-					*--cp = to_char(_uquad);
-					break;
-
-				case HEX:
-					do {
-						*--cp = xdigs[_uquad & 15];
-						_uquad >>= 4;
-					} while (_uquad);
-					break;
-
-				default:
-					cp = "bug in vfprintf: bad base";
-					size = strlen(cp);
-					goto skipsize;
-				}
-			}
-                       /*
-			* ...result is to be converted to an 'alternate form'.
-			* For o conversion, it increases the precision to force
-			* the first digit of the result to be a zero."
-			*     -- ANSI X3J11
-			*
-			* To demonstrate this case, compile and run:
-                        *    printf ("%#.0o",0);
-			*/
-                       else if (base == OCT && (flags & ALT))
-                         *--cp = '0';
-
-			size = buf + BUF - cp;
-		skipsize:
-			break;
-		default:	/* "%?" prints ?, unless ? is NUL */
-			flags &= ~VECTOR;
-			if (ch == '\0')
-				goto done;
-			/* pretend it was %c with argument ch */
-			cp = buf;
-			*cp = ch;
-			size = 1;
-			sign = '\0';
-			break;
-		}
-
-		/*
-		 * All reasonable formats wind up here.  At this point, `cp'
-		 * points to a string which (if not flags&LADJUST) should be
-		 * padded out to `width' places.  If flags&ZEROPAD, it should
-		 * first be prefixed by any sign or other prefix; otherwise,
-		 * it should be blank padded before the prefix is emitted.
-		 * After any left-hand padding and prefixing, emit zeroes
-		 * required by a decimal [diouxX] precision, then print the
-		 * string proper, then emit zeroes required by any leftover
-		 * floating precision; finally, if LADJUST, pad with blanks.
-		 *
-		 * Compute actual size, so we know how much to pad.
-		 * size excludes decimal prec; realsz includes it.
-		 */
-		realsz = dprec > size ? dprec : size;
-		if (sign)
-			realsz++;
-		else if (flags & HEXPREFIX)
-			realsz+= 2;
-
-		/* right-adjusting blank padding */
-		if ((flags & (LADJUST|ZEROPAD)) == 0)
-			PAD(width - realsz, blanks);
-
-		/* prefix */
-		if (sign) {
-			PRINT(&sign, 1);
-		} else if (flags & HEXPREFIX) {
-			ox[0] = '0';
-			ox[1] = ch;
-			PRINT(ox, 2);
-		}
-
-		/* right-adjusting zero padding */
-		if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD)
-			PAD(width - realsz, zeroes);
-
-		/* leading zeroes from decimal precision */
-		PAD(dprec - size, zeroes);
-
-		/* the string or number proper */
-#ifdef FLOATING_POINT
-		if ((flags & FPT) == 0) {
-#ifdef __SPE__
-		        if (flags & FIXEDPOINT) {
-				if (_uquad == 0 && !sign) {
-					/* kludge for __dtoa irregularity */
-					PRINT("0", 1);
-					if (expt < ndig || (flags & ALT) != 0) {
-						PRINT(decimal_point, 1);
-						PAD(ndig - 1, zeroes);
-					}
-				} else if (expt <= 0) {
-					PRINT("0", 1);
-					if(expt || ndig) {
-						PRINT(decimal_point, 1);
-						PAD(-expt, zeroes);
-						PRINT(cp, ndig);
-					}
-				} else if (expt >= ndig) {
-					PRINT(cp, ndig);
-					PAD(expt - ndig, zeroes);
-					if (flags & ALT)
-						PRINT(".", 1);
-				} else {
-					PRINT(cp, expt);
-					cp += expt;
-					PRINT(".", 1);
-					PRINT(cp, ndig-expt);
-				}
-		        } else
-#endif /* __SPE__ */
- 			        PRINT(cp, size);
-		} else {	/* glue together f_p fragments */
-			if (ch >= 'f') {	/* 'f' or 'g' */
-				if (_fpvalue == 0) {
-					/* kludge for __dtoa irregularity */
-					PRINT("0", 1);
-					if (expt < ndig || (flags & ALT) != 0) {
-						PRINT(decimal_point, 1);
-						PAD(ndig - 1, zeroes);
-					}
-				} else if (expt <= 0) {
-					PRINT("0", 1);
-					if(expt || ndig) {
-						PRINT(decimal_point, 1);
-						PAD(-expt, zeroes);
-						PRINT(cp, ndig);
-					}
-				} else if (expt >= ndig) {
-					PRINT(cp, ndig);
-					PAD(expt - ndig, zeroes);
-					if (flags & ALT)
-						PRINT(".", 1);
-				} else {
-					PRINT(cp, expt);
-					cp += expt;
-					PRINT(".", 1);
-					PRINT(cp, ndig-expt);
-				}
-			} else {	/* 'e' or 'E' */
-				if (ndig > 1 || flags & ALT) {
-					ox[0] = *cp++;
-					ox[1] = '.';
-					PRINT(ox, 2);
-                                       if (_fpvalue) {
-						PRINT(cp, ndig-1);
-					} else	/* 0.[0..] */
-						/* __dtoa irregularity */
-						PAD(ndig - 1, zeroes);
-				} else	/* XeYYY */
-					PRINT(cp, 1);
-				PRINT(expstr, expsize);
-			}
-		}
-#else
-		PRINT(cp, size);
-#endif
-		/* left-adjusting padding (always blank) */
-		if (flags & LADJUST)
-			PAD(width - realsz, blanks);
-
-		/* finally, adjust ret */
-		ret += width > realsz ? width : realsz;
-
-#ifdef __ALTIVEC__		
-		if ((flags & VECTOR) && vec_print_count-- > 1)
-		  {
-		    /* add vector separator */
-		    if (ch != 'c' || vec_sep != ' ')
-		      {
-		        PRINT(&vec_sep, 1);
-		        ret += 1;
-		      }
-		    FLUSH();
-		    sign = old_sign;
-		    ch = old_ch;
-		    goto reswitch;
-		  }
-#endif /* __ALTIVEC__ */
-		FLUSH();	/* copy out the I/O vectors */
-	}
-done:
-	FLUSH();
-error:
-	return (__sferror(fp) ? EOF : ret);
-	/* NOTREACHED */
-}
-
-#ifdef FLOATING_POINT
-
-#ifdef _NO_LONGDBL
-extern char *_dtoa_r _PARAMS((struct _reent *, double, int,
-			      int, int *, int *, char **));
-#else
-extern char *_ldtoa_r _PARAMS((struct _reent *, _LONG_DOUBLE, int,
-			      int, int *, int *, char **));
-#undef word0
-#define word0(x) ldword0(x)
-#endif
-
-static char *
-cvt(data, value, ndigits, flags, sign, decpt, ch, length)
-	struct _reent *data;
-#ifdef _NO_LONGDBL
-	double value;
-#else
-	_LONG_DOUBLE value;
-#endif
-	int ndigits, flags, *decpt, ch, *length;
-	char *sign;
-{
-	int mode, dsgn;
-	char *digits, *bp, *rve;
-#ifdef _NO_LONGDBL
-        union double_union tmp;
-#else
-        struct ldieee *ldptr;
-#endif
-
-	if (ch == 'f') {
-		mode = 3;		/* ndigits after the decimal point */
-	} else {
-		/* To obtain ndigits after the decimal point for the 'e' 
-		 * and 'E' formats, round to ndigits + 1 significant 
-		 * figures.
-		 */
-		if (ch == 'e' || ch == 'E') {
-			ndigits++;
-		}
-		mode = 2;		/* ndigits significant digits */
-	}
-
-#ifdef _NO_LONGDBL
-        tmp.d = value;
-
-	if (word0(tmp) & Sign_bit) { /* this will check for < 0 and -0.0 */
-		value = -value;
-		*sign = '-';
-        } else
-		*sign = '\000';
-
-	digits = _dtoa_r(data, value, mode, ndigits, decpt, &dsgn, &rve);
-#else /* !_NO_LONGDBL */
-	ldptr = (struct ldieee *)&value;
-	if (ldptr->sign) { /* this will check for < 0 and -0.0 */
-		value = -value;
-		*sign = '-';
-        } else
-		*sign = '\000';
-
-	digits = _ldtoa_r(data, value, mode, ndigits, decpt, &dsgn, &rve);
-#endif /* !_NO_LONGDBL */
-
-	if ((ch != 'g' && ch != 'G') || flags & ALT) {	/* Print trailing zeros */
-		bp = digits + ndigits;
-		if (ch == 'f') {
-			if (*digits == '0' && value)
-				*decpt = -ndigits + 1;
-			bp += *decpt;
-		}
-		if (value == 0)	/* kludge for __dtoa irregularity */
-			rve = bp;
-		while (rve < bp)
-			*rve++ = '0';
-	}
-	*length = rve - digits;
-	return (digits);
-}
-
-static int
-exponent(p0, exp, fmtch)
-	char *p0;
-	int exp, fmtch;
-{
-	register char *p, *t;
-	char expbuf[40];
-
-	p = p0;
-	*p++ = fmtch;
-	if (exp < 0) {
-		exp = -exp;
-		*p++ = '-';
-	}
-	else
-		*p++ = '+';
-	t = expbuf + 40;
-	if (exp > 9) {
-		do {
-			*--t = to_char(exp % 10);
-		} while ((exp /= 10) > 9);
-		*--t = to_char(exp);
-		for (; t < expbuf + 40; *p++ = *t++);
-	}
-	else {
-		*p++ = '0';
-		*p++ = to_char(exp);
-	}
-	return (p - p0);
-}
-#endif /* FLOATING_POINT */
-
-#ifdef __SPE__
-extern char *_ufix64toa_r _PARAMS((struct _reent *, unsigned long long, int,
-			           int, int *, int *, char **));
-static char *
-cvt_ufix64 (data, value, ndigits, decpt, length)
-	struct _reent *data;
-	unsigned long long value;
-	int ndigits, *decpt, *length;
-{
-	int dsgn;
-	char *digits, *bp, *rve;
-
-	/* treat the same as %f format and use mode=3 */
-	digits = _ufix64toa_r (data, value, 3, ndigits, decpt, &dsgn, &rve);
-
-        /* print trailing zeroes */
-	bp = digits + ndigits;
-	if (*digits == '0' && value)
-	  *decpt = -ndigits + 1;
-	bp += *decpt;
-	if (value == 0)	/* kludge for __dtoa irregularity */
-	  rve = bp;
-	while (rve < bp)
-	  *rve++ = '0';
-	*length = rve - digits;
-	return (digits);
-}
-#endif /* __SPE__ */
diff --git a/newlib/libc/machine/powerpc/vfscanf.c b/newlib/libc/machine/powerpc/vfscanf.c
deleted file mode 100644
index 37d2da7fe..000000000
--- a/newlib/libc/machine/powerpc/vfscanf.c
+++ /dev/null
@@ -1,1336 +0,0 @@
-/*
-FUNCTION
-<<vscanf>>, <<vfscanf>>, <<vsscanf>>---format argument list
-
-INDEX
-	vscanf
-INDEX
-	vfscanf
-INDEX
-	vsscanf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	#include <stdarg.h>
-	int vscanf(const char *<[fmt]>, va_list <[list]>);
-	int vfscanf(FILE *<[fp]>, const char *<[fmt]>, va_list <[list]>);
-	int vsscanf(const char *<[str]>, const char *<[fmt]>, va_list <[list]>);
-
-	int _vscanf_r(void *<[reent]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-	int _vfscanf_r(void *<[reent]>, FILE *<[fp]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-	int _vsscanf_r(void *<[reent]>, const char *<[str]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	#include <varargs.h>
-	int vscanf( <[fmt]>, <[ist]>)
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vfscanf( <[fp]>, <[fmt]>, <[list]>)
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-	
-	int vsscanf( <[str]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vscanf_r( <[reent]>, <[fmt]>, <[ist]>)
-	char *<[reent]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vfscanf_r( <[reent]>, <[fp]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-	
-	int _vsscanf_r( <[reent]>, <[str]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-DESCRIPTION
-<<vscanf>>, <<vfscanf>>, and <<vsscanf>> are (respectively) variants
-of <<scanf>>, <<fscanf>>, and <<sscanf>>.  They differ only in 
-allowing their caller to pass the variable argument list as a 
-<<va_list>> object (initialized by <<va_start>>) rather than 
-directly accepting a variable number of arguments.
-
-RETURNS
-The return values are consistent with the corresponding functions:
-<<vscanf>> returns the number of input fields successfully scanned,
-converted, and stored; the return value does not include scanned
-fields which were not stored.  
-
-If <<vscanf>> attempts to read at end-of-file, the return value 
-is <<EOF>>.
-
-If no fields were stored, the return value is <<0>>.
-
-The routines <<_vscanf_r>>, <<_vfscanf_f>>, and <<_vsscanf_r>> are
-reentrant versions which take an additional first parameter which points to the
-reentrancy structure.
-
-PORTABILITY
-These are GNU extensions.
-
-Supporting OS subroutines required:
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <wchar.h>
-#include <string.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include "local.h"
-
-#ifndef	NO_FLOATING_POINT
-#define FLOATING_POINT
-#endif
-
-#ifdef FLOATING_POINT
-#include <float.h>
-
-/* Currently a test is made to see if long double processing is warranted.
-   This could be changed in the future should the _ldtoa_r code be
-   preferred over _dtoa_r.  */
-#define _NO_LONGDBL
-#if defined WANT_IO_LONG_DBL && (LDBL_MANT_DIG > DBL_MANT_DIG)
-#undef _NO_LONGDBL
-extern _LONG_DOUBLE _strtold _PARAMS((char *s, char **sptr));
-#endif
-
-#define _NO_LONGLONG
-#if defined WANT_PRINTF_LONG_LONG && defined __GNUC__
-# undef _NO_LONGLONG
-#endif
-
-#include "floatio.h"
-#define	BUF	(MAXEXP+MAXFRACT+3)	/* 3 = sign + decimal point + NUL */
-/* An upper bound for how long a long prints in decimal.  4 / 13 approximates
-   log (2).  Add one char for roundoff compensation and one for the sign.  */
-#define MAX_LONG_LEN ((CHAR_BIT * sizeof (long)  - 1) * 4 / 13 + 2)
-#else
-#define	BUF	40
-#endif
-
-/*
- * Flags used during conversion.
- */
-
-#define	LONG		0x01	/* l: long or double */
-#define	LONGDBL		0x02	/* L: long double or long long */
-#define	SHORT		0x04	/* h: short */
-#define	SUPPRESS	0x08	/* suppress assignment */
-#define	POINTER		0x10	/* weird %p pointer (`fake hex') */
-#define	NOSKIP		0x20	/* do not skip blanks */
-
-/*
- * The following are used in numeric conversions only:
- * SIGNOK, NDIGITS, DPTOK, and EXPOK are for floating point;
- * SIGNOK, NDIGITS, PFXOK, and NZDIGITS are for integral.
- */
-
-#define	SIGNOK		0x40	/* +/- is (still) legal */
-#define	NDIGITS		0x80	/* no digits detected */
-
-#define	DPTOK		0x100	/* (float) decimal point is still legal */
-#define	EXPOK		0x200	/* (float) exponent (e+3, etc) still legal */
-
-#define	PFXOK		0x100	/* 0x prefix is (still) legal */
-#define	NZDIGITS	0x200	/* no zero digits detected */
-
-#define	VECTOR		0x400	/* v: vector */
-#define	FIXEDPOINT	0x800	/* r/R: fixed-point */
-#define	SIGNED  	0x1000	/* r: signed fixed-point */
-
-/*
- * Conversion types.
- */
-
-#define	CT_CHAR		0	/* %c conversion */
-#define	CT_CCL		1	/* %[...] conversion */
-#define	CT_STRING	2	/* %s conversion */
-#define	CT_INT		3	/* integer, i.e., strtol or strtoul */
-#define	CT_FLOAT	4	/* floating, i.e., strtod */
-
-#if 0
-#define u_char unsigned char
-#endif
-#define u_char char
-#define u_long unsigned long
-
-#ifndef _NO_LONGLONG
-typedef unsigned long long u_long_long;
-#endif
-
-typedef union
-{
-  char c[16] __attribute__ ((__aligned__ (16)));
-  short h[8];
-  long l[4];
-  int i[4];
-  float f[4];
-} vec_union;
-
-/*static*/ u_char *__sccl ();
-
-/*
- * vfscanf
- */
-
-#define BufferEmpty (fp->_r <= 0 && __srefill(fp))
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vfscanf, (fp, fmt, ap), 
-    register FILE *fp _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  CHECK_INIT(fp);
-  return __svfscanf_r (fp->_data, fp, fmt, ap);
-}
-
-int
-__svfscanf (fp, fmt0, ap)
-     register FILE *fp;
-     char _CONST *fmt0;
-     va_list ap;
-{
-  return __svfscanf_r (_REENT, fp, fmt0, ap);
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vfscanf_r, (data, fp, fmt, ap),
-    struct _reent *data _AND 
-    register FILE *fp _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  return __svfscanf_r (data, fp, fmt, ap);
-}
-
-
-int
-__svfscanf_r (rptr, fp, fmt0, ap)
-     struct _reent *rptr;
-     register FILE *fp;
-     char _CONST *fmt0;
-     va_list ap;
-{
-  register u_char *fmt = (u_char *) fmt0;
-  register int c;		/* character from format, or conversion */
-  register int type;		/* conversion type */
-  register size_t width;	/* field width, or 0 */
-  register char *p;		/* points into all kinds of strings */
-  register int n;		/* handy integer */
-  register int flags;		/* flags as defined above */
-  register char *p0;		/* saves original value of p when necessary */
-  int orig_flags;               /* saved flags used when processing vector */
-  int int_width;                /* tmp area to store width when processing int */
-  int nassigned;		/* number of fields assigned */
-  int nread;			/* number of characters consumed from fp */
-  int base = 0;			/* base argument to strtol/strtoul */
-  int nbytes = 1;               /* number of bytes read from fmt string */
-  wchar_t wc;                   /* wchar to use to read format string */
-  char vec_sep;                 /* vector separator char */
-  char last_space_char;         /* last white-space char eaten - needed for vec support */
-  int vec_read_count;           /* number of vector items to read separately */
-  int looped;                   /* has vector processing looped */
-  u_long (*ccfn) () = 0;	/* conversion function (strtol/strtoul) */
-  char ccltab[256];		/* character class table for %[...] */
-  char buf[BUF];		/* buffer for numeric conversions */
-  vec_union vec_buf;
-  char *lptr;                   /* literal pointer */
-#ifdef MB_CAPABLE
-  mbstate_t state;                /* value to keep track of multibyte state */
-#endif
-
-  char *ch_dest;
-  short *sp;
-  int *ip;
-  float *flp;
-  _LONG_DOUBLE *ldp;
-  double *dp;
-  long *lp;
-#ifndef _NO_LONGLONG
-  long long *llp;
-#else
-	u_long _uquad;
-#endif
-
-  /* `basefix' is used to avoid `if' tests in the integer scanner */
-  static _CONST short basefix[17] =
-    {10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16};
-
-  nassigned = 0;
-  nread = 0;
-  for (;;)
-    {
-#ifndef MB_CAPABLE
-      wc = *fmt;
-#else
-      memset (&state, '\0', sizeof (state));
-      nbytes = _mbtowc_r (rptr, &wc, fmt, MB_CUR_MAX, &state);
-#endif
-      fmt += nbytes;
-      if (wc == 0)
-	return nassigned;
-      if (nbytes == 1 && isspace (wc))
-	{
-	  for (;;)
-	    {
-	      if (BufferEmpty)
-		return nassigned;
-	      if (!isspace (*fp->_p))
-		break;
-	      nread++, fp->_r--, fp->_p++;
-	    }
-	  continue;
-	}
-      if (wc != '%')
-	goto literal;
-      width = 0;
-      flags = 0;
-      vec_sep = ' ';
-      vec_read_count = 0;
-      looped = 0;
-
-      /*
-       * switch on the format.  continue if done; break once format
-       * type is derived.
-       */
-
-    again:
-      c = *fmt++;
-
-      switch (c)
-	{
-	case '%':
-	literal:
-          lptr = fmt - nbytes;
-          for (n = 0; n < nbytes; ++n)
-            {
-	      if (BufferEmpty)
-	        goto input_failure;
-	      if (*fp->_p != *lptr)
-	        goto match_failure;
-	      fp->_r--, fp->_p++;
-	      nread++;
-              ++lptr;
-            }
-	  continue;
-
-	case '*':
-	  flags |= SUPPRESS;
-	  goto again;
-	case ',':
-	case ';':
-	case ':':
-	case '_':
-	  if (flags == SUPPRESS || flags == 0)
-	    vec_sep = c;
-	  goto again;
-	case 'l':
-	  if (flags & SHORT)
-	    continue; /* invalid format, don't process any further */
-	  if (flags & LONG)
-	    {
-	      flags &= ~LONG;
-	      flags &= ~VECTOR;
-	      flags |= LONGDBL;
-	    }
-	  else
-	    {
-	      flags |= LONG;
-	      if (flags & VECTOR)
-		vec_read_count = 4;
-	    }
-	  goto again;
-	case 'L':
-	  flags |= LONGDBL;
-	  flags &= ~VECTOR;
-	  goto again;
-	case 'h':
-	  flags |= SHORT;
-	  if (flags & LONG)
-	    continue;  /* invalid format, don't process any further */
-	  if (flags & VECTOR)
-	    vec_read_count = 8;
-	  goto again;
-#ifdef __ALTIVEC__
-	case 'v':
-	  flags |= VECTOR;
-	  vec_read_count = (flags & SHORT) ? 8 : ((flags & LONG) ? 4 : 16);
-	  goto again;
-#endif
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  width = width * 10 + c - '0';
-	  goto again;
-
-	  /*
-	   * Conversions. Those marked `compat' are for
-	   * 4.[123]BSD compatibility.
-	   *
-	   * (According to ANSI, E and X formats are supposed to
-	   * the same as e and x.  Sorry about that.)
-	   */
-
-	case 'D':		/* compat */
-	  flags |= LONG;
-	  /* FALLTHROUGH */
-	case 'd':
-	  type = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 10;
-	  break;
-
-	case 'i':
-	  type = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 0;
-	  break;
-
-	case 'O':		/* compat */
-	  flags |= LONG;
-	  /* FALLTHROUGH */
-	case 'o':
-	  type = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 8;
-	  break;
-
-	case 'u':
-	  type = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 10;
-	  break;
-
-	case 'X':		/* compat   XXX */
-	case 'x':
-	  flags |= PFXOK;	/* enable 0x prefixing */
-	  type = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 16;
-	  break;
-
-#ifdef FLOATING_POINT
-	case 'E':		/* compat   XXX */
-	case 'G':		/* compat   XXX */
-/* ANSI says that E,G and X behave the same way as e,g,x */
-	  /* FALLTHROUGH */
-	case 'e':
-	case 'f':
-	case 'g':
-	  type = CT_FLOAT;
-	  if (flags & VECTOR)
-	    vec_read_count = 4;
-	  break;
-       
-# ifdef __SPE__
-	  /* treat fixed-point like %f floating point */
-        case 'r':
-	  flags |= SIGNED;
-	  /* fallthrough */
-        case 'R':
-          flags |= FIXEDPOINT;
-	  type = CT_FLOAT;
-          break;
-# endif
-#endif
-
-	case 's':
-	  flags &= ~VECTOR;
-	  type = CT_STRING;
-	  break;
-
-	case '[':
-	  fmt = __sccl (ccltab, fmt);
-	  flags |= NOSKIP;
-	  flags &= ~VECTOR;
-	  type = CT_CCL;
-	  break;
-
-	case 'c':
-	  flags |= NOSKIP;
-	  type = CT_CHAR;
-	  if (flags & VECTOR)
-	    {
-	      /* not allowed to have h or l with c specifier */
-	      if (flags & (LONG | SHORT))
-		continue;  /* invalid format don't process any further */
-	      width = 0;
-	      vec_read_count = 16;
-	    }
-	  break;
-
-	case 'p':		/* pointer format is like hex */
-	  flags |= POINTER | PFXOK;
-	  type = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 16;
-	  break;
-
-	case 'n':
-	  if (flags & SUPPRESS)	/* ??? */
-	    continue;
-	  flags &= ~VECTOR;
-	  if (flags & SHORT)
-	    {
-	      sp = va_arg (ap, short *);
-	      *sp = nread;
-	    }
-	  else if (flags & LONG)
-	    {
-	      lp = va_arg (ap, long *);
-	      *lp = nread;
-	    }
-#ifndef _NO_LONGLONG
-	  else if (flags & LONGDBL)
-	    {
-	      llp = va_arg (ap, long long*);
-	      *llp = nread;
-	    }
-#endif
-	  else
-	    {
-	      ip = va_arg (ap, int *);
-	      *ip = nread;
-	    }
-	  continue;
-
-	  /*
-	   * Disgusting backwards compatibility hacks.	XXX
-	   */
-	case '\0':		/* compat */
-	  return EOF;
-
-	default:		/* compat */
-	  if (isupper (c))
-	    flags |= LONG;
-	  type = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 10;
-	  break;
-	}
-
-    process:
-      /*
-       * We have a conversion that requires input.
-       */
-      if (BufferEmpty)
-	goto input_failure;
-
-      /*
-       * Consume leading white space, except for formats that
-       * suppress this.
-       */
-      last_space_char = '\0';
-
-      if ((flags & NOSKIP) == 0)
-	{
-	  while (isspace (*fp->_p))
-	    {
-	      last_space_char = *fp->_p;
-	      nread++;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		goto input_failure;
-	    }
-	  /*
-	   * Note that there is at least one character in the
-	   * buffer, so conversions that do not set NOSKIP ca
-	   * no longer result in an input failure.
-	   */
-	}
-
-      /* for vector formats process separator characters after first loop */
-      if (looped && (flags & VECTOR))
-	{
-	  flags = orig_flags; 
-	  /* all formats other than default char have a separator char */
-	  if (vec_sep != ' ' || type != CT_CHAR)
-	    {
-	      if (vec_sep == ' ' && last_space_char != ' ' ||
-		  vec_sep != ' ' && *fp->_p != vec_sep)
-		goto match_failure;
-	      if (vec_sep != ' ')
-		{
-		  nread++;
-		  if (--fp->_r > 0)
-		    fp->_p++;
-		  else
-#ifndef CYGNUS_NEC
-		    if (__srefill (fp))
-#endif
-		      goto input_failure;
-		}
-	    }
-	  /* after eating the separator char, we must eat any white-space
-	     after the separator char that precedes the data to convert */
-	  if ((flags & NOSKIP) == 0)
-	    {
-	      while (isspace (*fp->_p))
-		{
-		  last_space_char = *fp->_p;
-		  nread++;
-		  if (--fp->_r > 0)
-		    fp->_p++;
-		  else
-#ifndef CYGNUS_NEC
-		    if (__srefill (fp))
-#endif
-		      goto input_failure;
-		}
-	    }
-
- 	}
-      else /* save to counter-act changes made to flags when processing */
-	orig_flags = flags;
-
-      /*
-       * Do the conversion.
-       */
-      switch (type)
-	{
-
-	case CT_CHAR:
-	  /* scan arbitrary characters (sets NOSKIP) */
-	  if (width == 0)
-	    width = 1;
-	  if (flags & SUPPRESS)
-	    {
-	      size_t sum = 0;
-
-	      for (;;)
-		{
-		  if ((n = fp->_r) < (int)width)
-		    {
-		      sum += n;
-		      width -= n;
-		      fp->_p += n;
-#ifndef CYGNUS_NEC
-		      if (__srefill (fp))
-			{
-#endif
-			  if (sum == 0)
-			    goto input_failure;
-			  break;
-#ifndef CYGNUS_NEC
-			}
-#endif
-		    }
-		  else
-		    {
-		      sum += width;
-		      fp->_r -= width;
-		      fp->_p += width;
-		      break;
-		    }
-		}
-	      nread += sum;
-	    }
-	  else
-	    {
-	      int n = width;
-	      if (!looped)
-		{
-		  if (flags & VECTOR)
-		    ch_dest = vec_buf.c;
-		  else
-		    ch_dest = va_arg (ap, char *);
-		}
-#ifdef CYGNUS_NEC
-	      /* Kludge city for the moment */
-	      if (fp->_r == 0)
-		goto input_failure;
-
-	      while (n && fp->_r)
-		{
-		  *ch_dest++ = *(fp->_p++);
-		  n--;
-		  fp->_r--;
-		  nread++;
-		}
-#else
-	      size_t r = fread (ch_dest, 1, width, fp);
-
-	      if (r == 0)
-		goto input_failure;
-	      nread += r;
-	      ch_dest += r;
-#endif
-	      if (!(flags & VECTOR))
-		nassigned++;
-	    }
-	  break;
-
-	case CT_CCL:
-	  /* scan a (nonempty) character class (sets NOSKIP) */
-	  if (width == 0)
-	    width = ~0;		/* `infinity' */
-	  /* take only those things in the class */
-	  if (flags & SUPPRESS)
-	    {
-	      n = 0;
-	      while (ccltab[*fp->_p])
-		{
-		  n++, fp->_r--, fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    {
-		      if (n == 0)
-			goto input_failure;
-		      break;
-		    }
-		}
-	      if (n == 0)
-		goto match_failure;
-	    }
-	  else
-	    {
-	      p0 = p = va_arg (ap, char *);
-	      while (ccltab[*fp->_p])
-		{
-		  fp->_r--;
-		  *p++ = *fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    {
-		      if (p == p0)
-			goto input_failure;
-		      break;
-		    }
-		}
-	      n = p - p0;
-	      if (n == 0)
-		goto match_failure;
-	      *p = 0;
-	      nassigned++;
-	    }
-	  nread += n;
-	  break;
-
-	case CT_STRING:
-	  /* like CCL, but zero-length string OK, & no NOSKIP */
-	  if (width == 0)
-	    width = ~0;
-	  if (flags & SUPPRESS)
-	    {
-	      n = 0;
-	      while (!isspace (*fp->_p))
-		{
-		  n++, fp->_r--, fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    break;
-		}
-	      nread += n;
-	    }
-	  else
-	    {
-	      p0 = p = va_arg (ap, char *);
-	      while (!isspace (*fp->_p))
-		{
-		  fp->_r--;
-		  *p++ = *fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    break;
-		}
-	      *p = 0;
-	      nread += p - p0;
-	      nassigned++;
-	    }
-	  continue;
-
-	case CT_INT:
-	  /* scan an integer as if by strtol/strtoul */
-	  int_width = width;
-#ifdef hardway
-	  if (int_width == 0 || int_width > sizeof (buf) - 1)
-	    int_width = sizeof (buf) - 1;
-#else
-	  /* size_t is unsigned, hence this optimisation */
-	  if (--int_width > sizeof (buf) - 2)
-	    int_width = sizeof (buf) - 2;
-	  int_width++;
-#endif
-	  flags |= SIGNOK | NDIGITS | NZDIGITS;
-	  for (p = buf; int_width; int_width--)
-	    {
-	      c = *fp->_p;
-	      /*
-	       * Switch on the character; `goto ok' if we
-	       * accept it as a part of number.
-	       */
-	      switch (c)
-		{
-		  /*
-		   * The digit 0 is always legal, but is special.
-		   * For %i conversions, if no digits (zero or nonzero)
-		   * have been scanned (only signs), we will have base==0.
-		   * In that case, we should set it to 8 and enable 0x
-		   * prefixing. Also, if we have not scanned zero digits
-		   * before this, do not turn off prefixing (someone else
-		   * will turn it off if we have scanned any nonzero digits).
-		   */
-		case '0':
-		  if (base == 0)
-		    {
-		      base = 8;
-		      flags |= PFXOK;
-		    }
-		  if (flags & NZDIGITS)
-		    flags &= ~(SIGNOK | NZDIGITS | NDIGITS);
-		  else
-		    flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* 1 through 7 always legal */
-		case '1':
-		case '2':
-		case '3':
-		case '4':
-		case '5':
-		case '6':
-		case '7':
-		  base = basefix[base];
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* digits 8 and 9 ok iff decimal or hex */
-		case '8':
-		case '9':
-		  base = basefix[base];
-		  if (base <= 8)
-		    break;	/* not legal here */
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* letters ok iff hex */
-		case 'A':
-		case 'B':
-		case 'C':
-		case 'D':
-		case 'E':
-		case 'F':
-		case 'a':
-		case 'b':
-		case 'c':
-		case 'd':
-		case 'e':
-		case 'f':
-		  /* no need to fix base here */
-		  if (base <= 10)
-		    break;	/* not legal here */
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* sign ok only as first character */
-		case '+':
-		case '-':
-		  if (flags & SIGNOK)
-		    {
-		      flags &= ~SIGNOK;
-		      goto ok;
-		    }
-		  break;
-
-		  /* x ok iff flag still set & 2nd char */
-		case 'x':
-		case 'X':
-		  if (flags & PFXOK && p == buf + 1)
-		    {
-		      base = 16;/* if %i */
-		      flags &= ~PFXOK;
-		      goto ok;
-		    }
-		  break;
-		}
-
-	      /*
-	       * If we got here, c is not a legal character
-	       * for a number.  Stop accumulating digits.
-	       */
-	      break;
-	    ok:
-	      /*
-	       * c is legal: store it and look at the next.
-	       */
-	      *p++ = c;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		break;		/* EOF */
-	    }
-	  /*
-	   * If we had only a sign, it is no good; push back the sign.
-	   * If the number ends in `x', it was [sign] '0' 'x', so push back
-	   * the x and treat it as [sign] '0'.
-	   */
-	  if (flags & NDIGITS)
-	    {
-	      if (p > buf)
-		_CAST_VOID ungetc (*(u_char *)-- p, fp);
-	      goto match_failure;
-	    }
-	  c = ((u_char *) p)[-1];
-	  if (c == 'x' || c == 'X')
-	    {
-	      --p;
-	      /*(void)*/ ungetc (c, fp);
-	    }
-	  if ((flags & SUPPRESS) == 0)
-	    {
-	      u_long res;
-
-	      *p = 0;
-	      res = (*ccfn) (rptr, buf, (char **) NULL, base);
-	      if ((flags & POINTER) && !(flags & VECTOR))
-		*(va_arg (ap, _PTR *)) = (_PTR) (unsigned _POINTER_INT) res;
-	      else if (flags & SHORT)
-		{
-		  if (!(flags & VECTOR))
-		    sp = va_arg (ap, short *);
-		  else if (!looped)
-		    sp = vec_buf.h;
-		  *sp++ = res;
-		}
-	      else if (flags & LONG)
-		{
-		  if (!(flags & VECTOR))
-		    lp = va_arg (ap, long *);
-		  else if (!looped)
-		    lp = vec_buf.l;
-		  *lp++ = res;
-		}
-#ifndef _NO_LONGLONG
-	      else if (flags & LONGDBL)
-		{
-		  u_long_long resll;
-		  if (ccfn == _strtoul_r)
-		    resll = _strtoull_r (rptr, buf, (char **) NULL, base);
-		  else
-		    resll = _strtoll_r (rptr, buf, (char **) NULL, base);
-		  llp = va_arg (ap, long long*);
-		  *llp = resll;
-		}
-#endif
-	      else
-		{
-		  if (!(flags & VECTOR))
-		    {
-		      ip = va_arg (ap, int *);
-		      *ip++ = res;
-		    }
-		  else
-		    {
-		      if (!looped)
-			ch_dest = vec_buf.c;
-		      *ch_dest++ = (char)res;
-		    }
-		}
-	      if (!(flags & VECTOR))
-		nassigned++;
-	    }
-	  nread += p - buf;
-	  break;
-
-#ifdef FLOATING_POINT
-	case CT_FLOAT:
-	{
-	  /* scan a floating point number as if by strtod */
-	  /* This code used to assume that the number of digits is reasonable.
-	     However, ANSI / ISO C makes no such stipulation; we have to get
-	     exact results even when there is an unreasonable amount of
-	     leading zeroes.  */
-	  long leading_zeroes = 0;
-	  long zeroes, exp_adjust;
-	  char *exp_start = NULL;
-	  int fl_width = width;
-#ifdef hardway
-	  if (fl_width == 0 || fl_width > sizeof (buf) - 1)
-	    fl_width = sizeof (buf) - 1;
-#else
-	  /* size_t is unsigned, hence this optimisation */
-	  if (--fl_width > sizeof (buf) - 2)
-	    fl_width = sizeof (buf) - 2;
-	  fl_width++;
-#endif
-	  flags |= SIGNOK | NDIGITS | DPTOK | EXPOK;
-	  zeroes = 0;
-	  exp_adjust = 0;
-	  for (p = buf; fl_width; )
-	    {
-	      c = *fp->_p;
-	      /*
-	       * This code mimicks the integer conversion
-	       * code, but is much simpler.
-	       */
-	      switch (c)
-		{
-
-		case '0':
-		  if (flags & NDIGITS)
-		    {
-		      flags &= ~SIGNOK;
-		      zeroes++;
-		      goto fskip;
-		    }
-		  /* Fall through.  */
-		case '1':
-		case '2':
-		case '3':
-		case '4':
-		case '5':
-		case '6':
-		case '7':
-		case '8':
-		case '9':
-		  flags &= ~(SIGNOK | NDIGITS);
-		  goto fok;
-
-		case '+':
-		case '-':
-		  if (flags & SIGNOK)
-		    {
-		      flags &= ~SIGNOK;
-		      goto fok;
-		    }
-		  break;
-		case '.':
-		  if (flags & DPTOK)
-		    {
-		      flags &= ~(SIGNOK | DPTOK);
-		      leading_zeroes = zeroes;
-		      goto fok;
-		    }
-		  break;
-		case 'e':
-		case 'E':
-		  /* no exponent without some digits */
-		  if ((flags & (NDIGITS | EXPOK)) == EXPOK
-		      || ((flags & EXPOK) && zeroes))
-		    {
-		      if (! (flags & DPTOK))
-			{
-			  exp_adjust = zeroes - leading_zeroes;
-			  exp_start = p;
-			}
-		      flags =
-			(flags & ~(EXPOK | DPTOK)) |
-			SIGNOK | NDIGITS;
-		      zeroes = 0;
-		      goto fok;
-		    }
-		  break;
-		}
-	      break;
-	    fok:
-	      *p++ = c;
-	    fskip:
-	      fl_width--;
-              ++nread;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		break;		/* EOF */
-	    }
-	  if (zeroes)
-	    flags &= ~NDIGITS;
-	  /*
-	   * If no digits, might be missing exponent digits
-	   * (just give back the exponent) or might be missing
-	   * regular digits, but had sign and/or decimal point.
-	   */
-	  if (flags & NDIGITS)
-	    {
-	      if (flags & EXPOK)
-		{
-		  /* no digits at all */
-		  while (p > buf)
-                    {
-		      ungetc (*(u_char *)-- p, fp);
-                      --nread;
-                    }
-		  goto match_failure;
-		}
-	      /* just a bad exponent (e and maybe sign) */
-	      c = *(u_char *)-- p;
-              --nread;
-	      if (c != 'e' && c != 'E')
-		{
-		  _CAST_VOID ungetc (c, fp);	/* sign */
-		  c = *(u_char *)-- p;
-                  --nread;
-		}
-	      _CAST_VOID ungetc (c, fp);
-	    }
-	  if ((flags & SUPPRESS) == 0)
-	    {
-#ifdef _NO_LONGDBL
-	      double res;
-#else  /* !_NO_LONG_DBL */
-	      long double res;
-#endif /* !_NO_LONG_DBL */
-	      long new_exp = 0;
-
-	      *p = 0;
-	      if ((flags & (DPTOK | EXPOK)) == EXPOK)
-		{
-		  exp_adjust = zeroes - leading_zeroes;
-		  new_exp = -exp_adjust;
-		  exp_start = p;
-		}
-	      else if (exp_adjust)
-                new_exp = _strtol_r (rptr, (exp_start + 1), NULL, 10) - exp_adjust;
-	      if (exp_adjust)
-		{
-
-		  /* If there might not be enough space for the new exponent,
-		     truncate some trailing digits to make room.  */
-		  if (exp_start >= buf + sizeof (buf) - MAX_LONG_LEN)
-		    exp_start = buf + sizeof (buf) - MAX_LONG_LEN - 1;
-                 sprintf (exp_start, "e%ld", new_exp);
-		}
-#ifdef __SPE__
-	      if (flags & FIXEDPOINT)
-		{
-		  __uint64_t ufix64;
-		  if (flags & SIGNED)
-		    ufix64 = (__uint64_t)_strtosfix64_r (rptr, buf, NULL);
-                  else
-		    ufix64 = _strtoufix64_r (rptr, buf, NULL);
-		  if (flags & SHORT)
-		    {
-		      __uint16_t *sp = va_arg (ap, __uint16_t *);
-		      *sp = (__uint16_t)(ufix64 >> 48);
-		    }
-		  else if (flags & LONG)
-		    {
-		      __uint64_t *llp = va_arg (ap, __uint64_t *);
-		      *llp = ufix64;
-		    }
-		  else
-		    {
-		      __uint32_t *lp = va_arg (ap, __uint32_t *);
-		      *lp = (__uint32_t)(ufix64 >> 32);
-		    }
-		  nassigned++;
-		  break;
-		}
-	      
-#endif /* __SPE__ */
-#ifdef _NO_LONGDBL
-	      res = _strtod_r (rptr, buf, NULL);
-#else  /* !_NO_LONGDBL */
-	      res = _strtold (buf, NULL);
-#endif /* !_NO_LONGDBL */
-	      if (flags & LONG)
-		{
-		  dp = va_arg (ap, double *);
-		  *dp = res;
-		}
-	      else if (flags & LONGDBL)
-		{
-		  ldp = va_arg (ap, _LONG_DOUBLE *);
-		  *ldp = res;
-		}
-	      else
-		{
-		  if (!(flags & VECTOR))
-		    flp = va_arg (ap, float *);
-		  else if (!looped)
-		    flp = vec_buf.f;
-		  *flp++ = res;
-		}
-	      if (!(flags & VECTOR))
-		nassigned++;
-	    }
-	  break;
-	}
-#endif /* FLOATING_POINT */
-	}
-      if (vec_read_count-- > 1)
-	{
-	  looped = 1;
-	  goto process;
-	}
-      if (flags & VECTOR)
-	{
-	  int i;
-	  unsigned long *vp = va_arg (ap, unsigned long *);
-	  for (i = 0; i < 4; ++i)
-	    *vp++ = vec_buf.l[i];
-	  nassigned++;
-	}
-    }
-input_failure:
-  return nassigned ? nassigned : -1;
-match_failure:
-  return nassigned;
-}
-
-/*
- * Fill in the given table from the scanset at the given format
- * (just after `[').  Return a pointer to the character past the
- * closing `]'.  The table has a 1 wherever characters should be
- * considered part of the scanset.
- */
-
-/*static*/
-u_char *
-__sccl (tab, fmt)
-     register char *tab;
-     register u_char *fmt;
-{
-  register int c, n, v;
-
-  /* first `clear' the whole table */
-  c = *fmt++;			/* first char hat => negated scanset */
-  if (c == '^')
-    {
-      v = 1;			/* default => accept */
-      c = *fmt++;		/* get new first char */
-    }
-  else
-    v = 0;			/* default => reject */
-  /* should probably use memset here */
-  for (n = 0; n < 256; n++)
-    tab[n] = v;
-  if (c == 0)
-    return fmt - 1;		/* format ended before closing ] */
-
-  /*
-   * Now set the entries corresponding to the actual scanset to the
-   * opposite of the above.
-   *
-   * The first character may be ']' (or '-') without being special; the
-   * last character may be '-'.
-   */
-
-  v = 1 - v;
-  for (;;)
-    {
-      tab[c] = v;		/* take character c */
-    doswitch:
-      n = *fmt++;		/* and examine the next */
-      switch (n)
-	{
-
-	case 0:		/* format ended too soon */
-	  return fmt - 1;
-
-	case '-':
-	  /*
-	   * A scanset of the form [01+-] is defined as `the digit 0, the
-	   * digit 1, the character +, the character -', but the effect of a
-	   * scanset such as [a-zA-Z0-9] is implementation defined.  The V7
-	   * Unix scanf treats `a-z' as `the letters a through z', but treats
-	   * `a-a' as `the letter a, the character -, and the letter a'.
-	   *
-	   * For compatibility, the `-' is not considerd to define a range if
-	   * the character following it is either a close bracket (required by
-	   * ANSI) or is not numerically greater than the character we just
-	   * stored in the table (c).
-	   */
-	  n = *fmt;
-	  if (n == ']' || n < c)
-	    {
-	      c = '-';
-	      break;		/* resume the for(;;) */
-	    }
-	  fmt++;
-	  do
-	    {			/* fill in the range */
-	      tab[++c] = v;
-	    }
-	  while (c < n);
-#if 1			/* XXX another disgusting compatibility hack */
-	  /*
-	   * Alas, the V7 Unix scanf also treats formats such
-	   * as [a-c-e] as `the letters a through e'. This too
-	   * is permitted by the standard....
-	   */
-	  goto doswitch;
-#else
-	  c = *fmt++;
-	  if (c == 0)
-	    return fmt - 1;
-	  if (c == ']')
-	    return fmt;
-#endif
-
-	  break;
-
-
-	case ']':		/* end of scanset */
-	  return fmt;
-
-	default:		/* just another character */
-	  c = n;
-	  break;
-	}
-    }
-  /* NOTREACHED */
-}
diff --git a/newlib/libc/machine/sh/Makefile.am b/newlib/libc/machine/sh/Makefile.am
deleted file mode 100644
index 14cd95a00..000000000
--- a/newlib/libc/machine/sh/Makefile.am
+++ /dev/null
@@ -1,23 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-if SH64
-lib_a_SOURCES = memcpy.S memset.S setjmp.S strcpy.S strlen.S strcmp.S strncpy.S
-else
-lib_a_SOURCES = memcpy.S memset.S setjmp.S strcpy.S strlen.S strcmp.S
-endif
-
-memcpy.o: asm.h
-memset.o: asm.h
-setjmp.o: asm.h
-strcpy.o: asm.h
-strcmp.o: asm.h
-strncpy.o: asm.h
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/sh/Makefile.in b/newlib/libc/machine/sh/Makefile.in
deleted file mode 100644
index db73facd1..000000000
--- a/newlib/libc/machine/sh/Makefile.in
+++ /dev/null
@@ -1,337 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-@SH64_TRUE@lib_a_SOURCES = @SH64_TRUE@memcpy.S memset.S setjmp.S strcpy.S strlen.S strcmp.S strncpy.S
-@SH64_FALSE@lib_a_SOURCES = @SH64_FALSE@memcpy.S memset.S setjmp.S strcpy.S strlen.S strcmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@SH64_TRUE@lib_a_OBJECTS =  memcpy.o memset.o setjmp.o strcpy.o strlen.o \
-@SH64_TRUE@strcmp.o strncpy.o
-@SH64_FALSE@lib_a_OBJECTS =  memcpy.o memset.o setjmp.o strcpy.o \
-@SH64_FALSE@strlen.o strcmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-memcpy.o: asm.h
-memset.o: asm.h
-setjmp.o: asm.h
-strcpy.o: asm.h
-strcmp.o: asm.h
-strncpy.o: asm.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/sh/aclocal.m4 b/newlib/libc/machine/sh/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/sh/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/sh/asm.h b/newlib/libc/machine/sh/asm.h
deleted file mode 100644
index 99a1866a1..000000000
--- a/newlib/libc/machine/sh/asm.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifdef __STDC__
-# define _C_LABEL(x)    _ ## x
-#else
-# define _C_LABEL(x)    _/**/x
-#endif
-#define _ASM_LABEL(x)   x
-
-#if __SH5__
-# if __SH5__ == 32 && __SHMEDIA__
-#  define TEXT .section .text..SHmedia32, "ax"
-# else
-#  define TEXT .text
-# endif
-
-# define _ENTRY(name)	\
-	TEXT; .balign 8; .globl name; name:
-#else
-#define _ENTRY(name)	\
-	.text; .align 2; .globl name; name:
-#endif /* __SH5__ */
-
-#define ENTRY(name)	\
-	_ENTRY(_C_LABEL(name))
-
-#if (defined (__sh2__) || defined (__SH2E__) || defined (__sh3__) || defined (__SH3E__) \
-     || defined (__SH4_SINGLE__) || defined (__SH4__)) \
-     || defined (__SH4_SINGLE_ONLY__) || defined (__SH5__)
-#define DELAYED_BRANCHES
-#define SL(branch, dest, in_slot, in_slot_arg2) \
-	branch##.s dest; in_slot, in_slot_arg2
-#else
-#define SL(branch, dest, in_slot, in_slot_arg2) \
-	in_slot, in_slot_arg2; branch dest
-#endif
-
-#ifdef __LITTLE_ENDIAN__
-#define SHHI shlld
-#define SHLO shlrd
-#else
-#define SHHI shlrd
-#define SHLO shlld
-#endif
diff --git a/newlib/libc/machine/sh/configure b/newlib/libc/machine/sh/configure
deleted file mode 100755
index d75fbb025..000000000
--- a/newlib/libc/machine/sh/configure
+++ /dev/null
@@ -1,2000 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=asm.h
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1578: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 1593 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1599: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 1610 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1616: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 1627 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1633: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-cat > conftest.$ac_ext <<EOF
-#line 1658 "configure"
-#include "confdefs.h"
-
-#if __SH5__
-  sh5
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "sh5" >/dev/null 2>&1; then
-  rm -rf conftest*
-  have_sh64=yes
-else
-  rm -rf conftest*
-  have_sh64=no
-fi
-rm -f conftest*
-
-
-
-if test $have_sh64 = yes; then
-  SH64_TRUE=
-  SH64_FALSE='#'
-else
-  SH64_TRUE='#'
-  SH64_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@CPP@%$CPP%g
-s%@SH64_TRUE@%$SH64_TRUE%g
-s%@SH64_FALSE@%$SH64_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/sh/configure.in b/newlib/libc/machine/sh/configure.in
deleted file mode 100644
index 7fb5afd0e..000000000
--- a/newlib/libc/machine/sh/configure.in
+++ /dev/null
@@ -1,19 +0,0 @@
-dnl This is the newlib/libc/machine/sh configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(asm.h)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_EGREP_CPP([sh5], [
-#if __SH5__
-  sh5
-#endif
-], [have_sh64=yes], [have_sh64=no])
-AM_CONDITIONAL(SH64, [test $have_sh64 = yes])
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/sh/memcpy.S b/newlib/libc/machine/sh/memcpy.S
deleted file mode 100644
index 56e6c6f43..000000000
--- a/newlib/libc/machine/sh/memcpy.S
+++ /dev/null
@@ -1,395 +0,0 @@
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-!        ARG1: source pointer
-!        ARG3: byte count
-!
-! Exit:  RESULT: destination pointer
-!        any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-!        unfortunately it is difficult in some cases to concatanate bytes
-!        into a longword on the SH, so this does a longword read and small
-!        writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-!     copied is unsigned greater than the address of the first byte to
-!     be copied.  This could be easily swapped for a signed comparison,
-!     but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-!     bytes memory chunk to b copied, the rest of the word can be read
-!     without side effects.
-!     This could be easily changed by increasing the minumum size of
-!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-!     however, this would cost a few extra cyles on average.
-!     For SHmedia, the assumption is that any quadword can be read in its
-!     enirety if at least one byte is included in the copy.
-!
-
-#include "asm.h"
-
-ENTRY(memcpy)
-
-#if __SHMEDIA__
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
-	ld.b r3,0,r63
-	pta/l Large,tr0
-	movi 25,r0
-	bgeu/u r4,r0,tr0
-	nsb r4,r0
-	shlli r0,5,r0
-	movi (L1-L0+63*32 + 1) & 0xffff,r1
-	sub r1, r0, r0
-L0:	ptrel r0,tr0
-	add r2,r4,r5
-	ptabs r18,tr1
-	add r3,r4,r6
-	blink tr0,r63
-
-	.balign 8
-L1:
-	/* 0 byte memcpy */
-	blink tr1,r63
-
-L4_7:	/* 4..7 byte memcpy cntd. */
-	stlo.l r2, 0, r0
-	or r6, r7, r6
-	sthi.l r5, -1, r6
-	stlo.l r5, -4, r6
-	blink tr1,r63
-
-L2_3:	/* 2 or 3 byte memcpy cntd. */
-	st.b r5,-1,r6
-	blink tr1,r63
-
-	/* 1 byte memcpy */
-	ld.b r3,0,r0
-	st.b r2,0,r0
-	blink tr1,r63
-
-L8_15:	/* 8..15 byte memcpy cntd. */
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-	
-	/* 2 or 3 byte memcpy */
-	ld.b r3,0,r0
-	ld.b r2,0,r63
-	ld.b r3,1,r1
-	st.b r2,0,r0
-	pta/l L2_3,tr0
-	ld.b r6,-1,r6
-	st.b r2,1,r1
-	blink tr0, r63
-
-	/* 4 .. 7 byte memcpy */
-	LDUAL (r3, 0, r0, r1)
-	pta L4_7, tr0
-	ldlo.l r6, -4, r7
-	or r0, r1, r0
-	sthi.l r2, 3, r0
-	ldhi.l r6, -1, r6
-	blink tr0, r63
-
-	/* 8 .. 15 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	pta L8_15, tr0
-	ldlo.q r6, -8, r7
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	ldhi.q r6, -1, r6
-	blink tr0, r63
-
-	/* 16 .. 24 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	LDUAQ (r3, 8, r8, r9)
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	or r8, r9, r8
-	sthi.q r2, 15, r8
-	ldlo.q r6, -8, r7
-	ldhi.q r6, -1, r6
-	stlo.q r2, 8, r8
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-
-Large:
-	ld.b r2, 0, r63
-	pta/l  Loop_ua, tr1
-	ori r3, -8, r7
-	sub r2, r7, r22
-	sub r3, r2, r6
-	add r2, r4, r5
-	ldlo.q r3, 0, r0
-	addi r5, -16, r5
-	movi 64+8, r27 // could subtract r7 from that.
-	stlo.q r2, 0, r0
-	sthi.q r2, 7, r0
-	ldx.q r22, r6, r0
-	bgtu/l r27, r4, tr1
-
-	addi r5, -48, r27
-	pta/l Loop_line, tr0
-	addi r6, 64, r36
-	addi r6, -24, r19
-	addi r6, -16, r20
-	addi r6, -8, r21
-
-Loop_line:
-	ldx.q r22, r36, r63
-	alloco r22, 32
-	addi r22, 32, r22
-	ldx.q r22, r19, r23
-	sthi.q r22, -25, r0
-	ldx.q r22, r20, r24
-	ldx.q r22, r21, r25
-	stlo.q r22, -32, r0
-	ldx.q r22, r6,  r0
-	sthi.q r22, -17, r23
-	sthi.q r22,  -9, r24
-	sthi.q r22,  -1, r25
-	stlo.q r22, -24, r23
-	stlo.q r22, -16, r24
-	stlo.q r22,  -8, r25
-	bgeu r27, r22, tr0
-
-Loop_ua:
-	addi r22, 8, r22
-	sthi.q r22, -1, r0
-	stlo.q r22, -8, r0
-	ldx.q r22, r6, r0
-	bgtu/l r5, r22, tr1
-
-	add r3, r4, r7
-	ldlo.q r7, -8, r1
-	sthi.q r22, 7, r0
-	ldhi.q r7, -1, r7
-	ptabs r18,tr1
-	stlo.q r22, 0, r0
-	or r1, r7, r1
-	sthi.q r5, 15, r1
-	stlo.q r5, 8, r1
-	blink tr1, r63
-
-#else /* ! SHMEDIA, i.e. SH1 .. SH4 / SHcompact */
-
-#ifdef __SH5__
-#define DST r2
-#define SRC r3
-#define COUNT r4
-#define TMP0 r5
-#define TMP1 r6
-#define RESULT r2
-#else
-#define DST r4
-#define SRC r5
-#define COUNT r6
-#define TMP0 r2
-#define TMP1 r3
-#define RESULT r0
-#endif
-
-#ifdef __LITTLE_ENDIAN__
-	! Little endian version copies with increasing addresses.
-	mov DST,TMP1	! Save return value
-	mov #11,r0	! Check if small number of bytes
-	cmp/hs r0,COUNT
-			! COUNT becomes src end address
-	SL(bf, L_small, add SRC,COUNT)
-	mov #1,r1
-	tst r1,SRC	! check if source even
-	SL(bt, L_even, mov COUNT,r7)
-	mov.b @SRC+,r0	! no, make it even.
-	mov.b r0,@DST
-	add #1,DST
-L_even:	tst r1,DST	! check if destination is even
-	add #-3,r7
-	SL(bf, L_odddst, mov #2,r1)
-	tst r1,DST	! check if destination is 4-byte aligned
-	mov DST,r0
-	SL(bt, L_al4dst, sub SRC,r0)
-	mov.w @SRC+,TMP0
-	mov.w TMP0,@DST
-	! add #2,DST  DST is dead here.
-L_al4dst:
-	tst r1,SRC
-	bt L_al4both
-	mov.w @SRC+,r1
-	swap.w r1,r1
-	add #-6,r0
-	add #-6,r7	! r7 := src end address minus 9.
-	.align 2
-L_2l_loop:
-	mov.l @SRC+,TMP0 ! Read & write two longwords per iteration
-	xtrct TMP0,r1
-	mov.l r1,@(r0,SRC)
-	cmp/hs r7,SRC
-	mov.l @SRC+,r1
-	xtrct r1,TMP0
-	mov.l TMP0,@(r0,SRC)
-	bf L_2l_loop
-	add #-2,SRC
-	bra  L_cleanup
-	add #5,r0
-L_al4both:
-	add #-4,r0
-	.align 2
-L_al4both_loop:
-	mov.l @SRC+,DST   ! Read longword, write longword per iteration
-	cmp/hs r7,SRC
-	SL(bf, L_al4both_loop, mov.l DST,@(r0,SRC))
-
-	bra L_cleanup
-	add #3,r0
-
-L_odddst:
-	tst r1,SRC
-	SL(bt, L_al4src, add #-1,DST)
-	mov.w @SRC+,r0
-	mov.b r0,@(1,DST)
-	shlr8 r0
-	mov.b r0,@(2,DST)
-	add #2,DST
-L_al4src:
-	.align 2
-L_odd_loop:
-	mov.l @SRC+,r0   ! Read longword, write byte, word, byte per iteration
-	cmp/hs r7,SRC
-	mov.b r0,@(1,DST)
-	shlr8 r0
-	mov.w r0,@(2,DST)
-	shlr16 r0
-	mov.b r0,@(4,DST)
-	SL(bf, L_odd_loop, add #4,DST)
-	.align 2 ! avoid nop in more frequently executed code.
-L_cleanup2:
-	mov	DST,r0
-	sub	SRC,r0
-L_cleanup:
-	cmp/eq	COUNT,SRC
-	bt	L_ready
-	.align 2
-L_cleanup_loop:
-	mov.b	@SRC+,r1
-	cmp/eq	COUNT,SRC
-	mov.b	r1,@(r0,SRC)
-	bf	L_cleanup_loop
-L_ready:
-	rts
-	mov	TMP1,RESULT
-L_small:
-	bra L_cleanup2
-	add #-1,DST
-#else /* ! __LITTLE_ENDIAN__ */
-	! Big endian version copies with decreasing addresses.
-	mov DST,r0
-	add COUNT,r0
-	sub DST,SRC
-	mov #11,r1
-	cmp/hs r1,COUNT
-	SL(bf, L_small, add #-1,SRC)
-	mov SRC,TMP1
-	add r0,TMP1
-	shlr TMP1
-	SL(bt, L_even,
-	mov DST,r7)
-	mov.b @(r0,SRC),TMP0
-	add #-1,TMP1
-	mov.b TMP0,@-r0
-L_even:
-	tst #1,r0
-	add #-1,SRC
-	SL(bf, L_odddst, add #8,r7)
-	tst #2,r0
-	bt L_al4dst
-	add #-1,TMP1
-	mov.w @(r0,SRC),r1
-	mov.w r1,@-r0
-L_al4dst:
-	shlr TMP1
-	bt L_al4both
-	mov.w @(r0,SRC),r1
-	swap.w r1,r1
-	add #4,r7
-	add #-4,SRC
-	.align 2
-L_2l_loop:
-	mov.l @(r0,SRC),TMP0
-	xtrct TMP0,r1
-	mov.l r1,@-r0
-	cmp/hs r7,r0
-	mov.l @(r0,SRC),r1
-	xtrct r1,TMP0
-	mov.l TMP0,@-r0
-	bt L_2l_loop
-	bra L_cleanup
-	add #5,SRC
-
-	nop ! avoid nop in executed code.
-L_al4both:
-	add #-2,SRC
-	.align 2
-L_al4both_loop:
-	mov.l @(r0,SRC),r1
-	cmp/hs r7,r0
-	SL(bt, L_al4both_loop,
-	mov.l r1,@-r0)
-	bra L_cleanup
-	add #3,SRC
-
-	nop ! avoid nop in executed code.
-L_odddst:
-	shlr TMP1
-	bt L_al4src
-	mov.w @(r0,SRC),r1
-	mov.b r1,@-r0
-	shlr8 r1
-	mov.b r1,@-r0
-L_al4src:
-	add #-2,SRC
-	.align 2
-L_odd_loop:
-	mov.l @(r0,SRC),TMP0
-	cmp/hs r7,r0
-	mov.b TMP0,@-r0
-	shlr8 TMP0
-	mov.w TMP0,@-r0
-	shlr16 TMP0
-	mov.b TMP0,@-r0
-	bt L_odd_loop
-
-	add #3,SRC
-L_cleanup:
-L_small:
-	cmp/eq DST,r0
-	bt L_ready
-	add #1,DST
-	.align 2
-L_cleanup_loop:
-	mov.b @(r0,SRC),TMP0
-	cmp/eq DST,r0
-	mov.b TMP0,@-r0
-	bf L_cleanup_loop
-L_ready:
-	rts
-	mov r0,RESULT
-#endif /* ! __LITTLE_ENDIAN__ */
-#endif /* ! SHMEDIA */
diff --git a/newlib/libc/machine/sh/memset.S b/newlib/libc/machine/sh/memset.S
deleted file mode 100644
index 2b45aff36..000000000
--- a/newlib/libc/machine/sh/memset.S
+++ /dev/null
@@ -1,164 +0,0 @@
-!
-! Fast SH memset
-!
-! by Toshiyasu Morita (tm@netcom.com)
-!
-! SH5 code by J"orn Rennecke (joern.rennecke@superh.com)
-! Copyright 2002 SuperH Ltd.
-!
-
-#include "asm.h"
-
-ENTRY(memset)
-#if __SHMEDIA__
-	pta/l multiquad, tr0
-	ptabs r18, tr2
-
-	andi r2, -8, r25
-	add r2, r4, r5
-	addi r5, -1, r20    // calculate end address.
-	andi r20, -8, r20
-	cmveq r4, r25, r20
-	bne/u r25, r20, tr0 // multiquad
-
-!	This sequence could clobber volatile objects that are in the same
-!	quadword as a very short char array.
-!	ldlo.q r2, 0, r7
-!	shlli r4, 2, r4
-!	movi -1, r8
-!	SHHI r8, r4, r8
-!	SHHI r8, r4, r8
-!	mcmv r7, r8, r3
-!	stlo.q r2, 0, r3
-
-	pta/l setlongs, tr0
-	movi 4, r8
-	bgeu/u r4, r8, tr0
-	pta/l endset, tr0
-	beqi/u r4, 0, tr0
-	st.b r2, 0, r3
-	beqi/u r4, 1, tr0
-	nop
-	st.b r2, 1, r3
-	beqi/l r4, 2, tr0
-	st.b r2,2,r3
-endset: blink tr2, r63
-setlongs:
-	mshflo.b r3, r3, r3
-	mperm.w r3, r63, r3	// Fill pattern now in every byte of r3
-	stlo.l r2, 0, r3
-	nop
-	nop
-	sthi.l r5, -1, r3
-	blink tr2, r63
-
-multiquad:
-	mshflo.b r3, r3, r3
-	mperm.w r3, r63, r3	// Fill pattern now in every byte of r3
-	pta/l lastquad, tr0
-	stlo.q r2, 0, r3
-	sub r20, r25, r24
-	movi 64, r9
-	beqi/u r24, 8, tr0 // lastquad
-	pta/l loop, tr1
-	addi r20, -7*8, r8 // loop end address; This might overflow, so we need
-	                   // to use a different test before we start the loop
-	bgeu/u r24, r9, tr1// loop
-	st.q r25, 8, r3
-	shlri r24, 4, r24
-	st.q r20, -8, r3
-	beqi/u r24, 1, tr0 // lastquad
-	st.q r25, 16, r3
-	st.q r20, -16, r3
-	beqi/u r24, 2, tr0 // lastquad
-	st.q r25, 24, r3
-	st.q r20, -24, r3
-lastquad:
-	sthi.q r5, -1, r3
-	blink tr2,r63
-
-loop:
-	alloco r25, 32
-	st.q r25, 8, r3
-	st.q r25, 16, r3
-	st.q r25, 24, r3
-	st.q r25, 32, r3
-	addi r25, 32, r25
-	bgeu/l r8, r25, tr1 // loop
-
-	st.q r20, -40, r3
-	st.q r20, -32, r3
-	st.q r20, -24, r3
-	st.q r20, -16, r3
-	st.q r20, -8, r3
-	sthi.q r5, -1, r3
-	blink tr2,r63
-#else /* ! SHMEDIA, i.e. SH1 .. SH4 / SHcompact */
-! Entry: r4: destination pointer
-!        r5: fill value
-!        r6: byte count
-!
-! Exit:  r0-r3: trashed
-!
-
-! This assumes that the first four bytes of the address space (0..3) are
-! reserved - usually by the linker script.  Otherwise, we would had to check
-! for the case of objects of the size 12..15 at address 0..3 .
-
-#ifdef __SH5__
-#define DST r2
-#define VAL r3
-#define CNT r4
-#define TMP r5
-#else
-#define DST r4
-#define VAL r5
-#define CNT r6
-#define TMP r2
-#endif
-
-	mov	#12,r0	! Check for small number of bytes
-	cmp/gt	CNT,r0
-	mov	DST,r0
-	SL(bt, L_store_byte_loop_check0, add DST,CNT)
-
-	tst	#3,r0	! Align destination
-	SL(bt,	L_dup_bytes, extu.b r5,r5)
-	.balignw 4,0x0009
-L_align_loop:
-	mov.b	VAL,@r0
-	add	#1,r0
-	tst	#3,r0
-	bf	L_align_loop
-
-L_dup_bytes:	
-	swap.b	VAL,TMP	! Duplicate bytes across longword
-	or	TMP,VAL
-	swap.w	VAL,TMP
-	or	TMP,VAL
-
-	add	#-16,CNT
-
-	.balignw 4,0x0009
-L_store_long_loop:
-	mov.l	VAL,@r0	! Store double longs to memory
-	cmp/hs	CNT,r0
-	mov.l	VAL,@(4,r0)
-	SL(bf, L_store_long_loop, add #8,r0)
-
-	add	#16,CNT
-
-L_store_byte_loop_check0:
-	cmp/eq	CNT,r0
-	bt	L_exit
-	.balignw 4,0x0009
-L_store_byte_loop:
-	mov.b	VAL,@r0	! Store bytes to memory
-	add	#1,r0
-	cmp/eq	CNT,r0
-	bf	L_store_byte_loop
-
-L_exit:
-	rts
-	mov	r4,r0
-#endif /* ! SHMEDIA */
diff --git a/newlib/libc/machine/sh/setjmp.S b/newlib/libc/machine/sh/setjmp.S
deleted file mode 100644
index 520218f23..000000000
--- a/newlib/libc/machine/sh/setjmp.S
+++ /dev/null
@@ -1,191 +0,0 @@
-/* We want to pretend we're in SHmedia mode, even when assembling for
-   SHcompact.  */
-#if __SH5__ == 32 && ! __SHMEDIA__
-# undef __SHMEDIA__
-# define __SHMEDIA__ 1
-#endif
-
-#if __SHMEDIA__
-	.mode	SHmedia
-#endif
-
-#include "asm.h"
-
-ENTRY(setjmp)
-#if __SH5__
-	ptabs	r18, tr0
-	gettr	tr5, r5
-	gettr	tr6, r6
-	gettr	tr7, r7
-	st.q	r2,  0*8, r18
-	st.q	r2,  1*8, r10
-	st.q	r2,  2*8, r11
-	st.q	r2,  3*8, r12
-	st.q	r2,  4*8, r13
-	st.q	r2,  5*8, r14
-	st.q	r2,  6*8, r15
-	st.q	r2,  7*8, r28
-	st.q	r2,  8*8, r29
-	st.q	r2,  9*8, r30
-	st.q	r2, 10*8, r31
-	st.q	r2, 11*8, r32
-	st.q	r2, 12*8, r33
-	st.q	r2, 13*8, r34
-	st.q	r2, 14*8, r35
-	st.q	r2, 15*8, r44
-	st.q	r2, 16*8, r45
-	st.q	r2, 17*8, r46
-	st.q	r2, 18*8, r47
-	st.q	r2, 19*8, r48
-	st.q	r2, 20*8, r49
-	st.q	r2, 21*8, r50
-	st.q	r2, 22*8, r51
-	st.q	r2, 23*8, r52
-	st.q	r2, 24*8, r53
-	st.q	r2, 25*8, r54
-	st.q	r2, 26*8, r55
-	st.q	r2, 27*8, r56
-	st.q	r2, 28*8, r57
-	st.q	r2, 29*8, r58
-	st.q	r2, 30*8, r59
-	st.q	r2, 31*8, r5
-	st.q	r2, 32*8, r6
-	st.q	r2, 33*8, r7
-#if ! __SH4_NOFPU__
-	fst.d	r2, 34*8, dr12
-	fst.d	r2, 35*8, dr14
-	fst.d	r2, 36*8, dr36
-	fst.d	r2, 37*8, dr38
-	fst.d	r2, 38*8, dr40
-	fst.d	r2, 39*8, dr42
-	fst.d	r2, 40*8, dr44
-	fst.d	r2, 41*8, dr46
-	fst.d	r2, 42*8, dr48
-	fst.d	r2, 43*8, dr50
-	fst.d	r2, 44*8, dr52
-	fst.d	r2, 45*8, dr54
-	fst.d	r2, 46*8, dr56
-	fst.d	r2, 47*8, dr58
-	fst.d	r2, 48*8, dr60
-	fst.d	r2, 49*8, dr62
-#endif
-	movi	0, r2
-	blink	tr0, r63
-#else
-#if defined (__SH2E__) || defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__)
-	add	#(13*4),r4
-#else
-	add	#(9*4),r4
-#endif
-
-	sts.l	pr,@-r4
-
-#if defined (__SH2E__) || defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__)
-	fmov.s	fr15,@-r4	! call saved floating point registers
-	fmov.s	fr14,@-r4
-	fmov.s	fr13,@-r4
-	fmov.s	fr12,@-r4
-#endif
-
-	mov.l	r15,@-r4	! call saved integer registers
-	mov.l	r14,@-r4
-	mov.l	r13,@-r4
-	mov.l	r12,@-r4
-
-	mov.l	r11,@-r4
-	mov.l	r10,@-r4
-	mov.l	r9,@-r4
-	mov.l	r8,@-r4
-
-	rts
-	mov    #0,r0
-#endif /* __SH5__ */
-
-ENTRY(longjmp)
-#if __SH5__
-	ld.q	r2,  0*8, r18
-	ptabs	r18, tr0
-	ld.q	r2,  1*8, r10
-	ld.q	r2,  2*8, r11
-	ld.q	r2,  3*8, r12
-	ld.q	r2,  4*8, r13
-	ld.q	r2,  5*8, r14
-	ld.q	r2,  6*8, r15
-	ld.q	r2,  7*8, r28
-	ld.q	r2,  8*8, r29
-	ld.q	r2,  9*8, r30
-	ld.q	r2, 10*8, r31
-	ld.q	r2, 11*8, r32
-	ld.q	r2, 12*8, r33
-	ld.q	r2, 13*8, r34
-	ld.q	r2, 14*8, r35
-	ld.q	r2, 15*8, r44
-	ld.q	r2, 16*8, r45
-	ld.q	r2, 17*8, r46
-	ld.q	r2, 18*8, r47
-	ld.q	r2, 19*8, r48
-	ld.q	r2, 20*8, r49
-	ld.q	r2, 21*8, r50
-	ld.q	r2, 22*8, r51
-	ld.q	r2, 23*8, r52
-	ld.q	r2, 24*8, r53
-	ld.q	r2, 25*8, r54
-	ld.q	r2, 26*8, r55
-	ld.q	r2, 27*8, r56
-	ld.q	r2, 28*8, r57
-	ld.q	r2, 29*8, r58
-	ld.q	r2, 30*8, r59
-	ld.q	r2, 31*8, r5
-	ld.q	r2, 32*8, r6
-	ld.q	r2, 33*8, r7
-	ptabs	r5, tr5
-	ptabs	r6, tr6
-	ptabs	r7, tr7
-#if ! __SH4_NOFPU__
-	fld.d	r2, 34*8, dr12
-	fld.d	r2, 35*8, dr14
-	fld.d	r2, 36*8, dr36
-	fld.d	r2, 37*8, dr38
-	fld.d	r2, 38*8, dr40
-	fld.d	r2, 39*8, dr42
-	fld.d	r2, 40*8, dr44
-	fld.d	r2, 41*8, dr46
-	fld.d	r2, 42*8, dr48
-	fld.d	r2, 43*8, dr50
-	fld.d	r2, 44*8, dr52
-	fld.d	r2, 45*8, dr54
-	fld.d	r2, 46*8, dr56
-	fld.d	r2, 47*8, dr58
-	fld.d	r2, 48*8, dr60
-	fld.d	r2, 49*8, dr62
-#endif
-	movi	1, r2
-	cmvne	r3, r3, r2
-	blink	tr0, r63
-#else
-	mov.l	@r4+,r8
-	mov.l	@r4+,r9
-	mov.l	@r4+,r10
-	mov.l	@r4+,r11
-
-	mov.l	@r4+,r12
-	mov.l	@r4+,r13
-	mov.l	@r4+,r14
-	mov.l	@r4+,r15
-
-#if defined (__SH2E__) || defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__)
-	fmov.s	@r4+,fr12	! call saved floating point registers
-	fmov.s	@r4+,fr13
-	fmov.s	@r4+,fr14
-	fmov.s	@r4+,fr15
-#endif
-
-	lds.l	@r4+,pr
-
-	mov	r5,r0
-	tst	r0,r0
-	bf	retr4
-	movt	r0
-retr4:	rts
-	nop
-#endif /* __SH5__ */
diff --git a/newlib/libc/machine/sh/strcmp.S b/newlib/libc/machine/sh/strcmp.S
deleted file mode 100644
index 8dcc20b0c..000000000
--- a/newlib/libc/machine/sh/strcmp.S
+++ /dev/null
@@ -1,225 +0,0 @@
-! SH5 code Copyright 2002 SuperH Ltd.
-
-#include "asm.h"
-
-ENTRY(strcmp)
-
-#if __SHMEDIA__
-	ld.ub	r2,0,r4
-	pt/l	quickret0,tr0
-	ld.ub	r3,0,r5
-	ptabs	r18,tr2
-	beqi/u	r4,0,tr0
-	ld.ub	r2,1,r6
-	bne/u	r4,r5,tr0
-	pt/l	quickret1,tr1
-	ld.ub	r3,1,r7
-	beqi/u	r6,0,tr1
-	ld.ub	r2,2,r4
-	bne/u	r6,r7,tr1
-	ld.ub	r3,2,r5
-	beqi/u	r4,0,tr0
-	ld.ub	r2,3,r6
-	bne/u	r4,r5,tr0
-	ld.ub	r3,3,r7
-	beqi/u	r6,0,tr1
-	ld.ub	r2,4,r4
-	bne/u	r6,r7,tr1
-	ld.ub	r3,4,r5
-	beqi/u	r4,0,tr0
-	ld.ub	r2,5,r6
-	bne/u	r4,r5,tr0
-	ld.ub	r3,5,r7
-	beqi/u	r6,0,tr1
-	ld.ub	r2,6,r4
-	bne/u	r6,r7,tr1
-	ld.ub	r3,6,r5
-	beqi/u	r4,0,tr0
-	ld.ub	r2,7,r6
-	bne/u	r4,r5,tr0
-	ld.ub	r3,7,r7
-	beqi/u	r6,0,tr1
-	sub	r3,r2,r3
-	bne/u	r6,r7,tr1
-
-	andi	r2,-8,r2
-	add	r3,r2,r3
-	ldlo.q	r3,8,r23
-	pt	r23_zero,tr0
-	shlli	r3,3,r22
-	sub	r63,r22,r20
-	movi	0x101,r6
-	mperm.w	r6,r63,r6
-	SHLO	r6,r22,r7
-	msubs.ub r7,r23,r8
-	pt	loop,tr1
-	bnei/u	r8,0,tr0 // r23_zero
-	pt	found_zero,tr0
-	addi	r3,15,r3
-	andi	r3,-8,r3
-	sub	r3,r2,r3
-	bne/l	r7,r6,tr1 // loop
-	/* The strings are aligned to each other.  */
-	/* It is possible to have a loop with six cycles / iteration
-	   by re-ordering the exit conditions, but then it needs extra
-	   time and/or code to sort out the r4 != r5 case.  */
-	pt	al_loop,tr1
-	pt	al_found_zero,tr0
-al_loop:
-	ld.q	r2,8,r4
-	ldx.q	r2,r3,r5
-	addi	r2,8,r2
-	mcmpeq.b r63,r4,r8
-	pt	cmp_quad,tr3
-	bnei/u	r8,0,tr0  // al_found_zero
-	beq/l	r4,r5,tr1 // al_loop
-	blink	tr3,r63   // cmp_quad
-
-	.balign 8
-quickret0:
-	sub	r4,r5,r2
-	blink	tr2,r63
-quickret1:
-	sub	r6,r7,r2
-	blink	tr2,r63
-
-loop:
-	ld.q	r2,8,r4
-	ldx.q	r2,r3,r19
-	addi	r2,8,r2
-	msubs.ub r6,r4,r8
-	mcmpeq.b r63,r19,r9
-	SHHI	r19,r20,r21
-	or	r21,r23,r5
-	SHLO	r19,r22,r23
-	bne/u	r8,r9,tr0 // found_zero
-	beq/l	r4,r5,tr1 // loop
-cmp_quad:
-#ifdef __LITTLE_ENDIAN__
-	byterev r4,r4
-	byterev r5,r5
-#endif
-	cmpgtu	r4,r5,r6
-	cmpgtu	r5,r4,r7
-	sub	r6,r7,r2
-	blink tr2,r63
-found_zero:
-	pt	zero_now,tr0
-	pt	cmp_quad,tr1
-	SHHI	r9,r20,r7
-	bne/u	r8,r7,tr0 // zero_now
-	bne/u	r4,r5,tr1 // cmp_quad
-	SHLO	r9,r22,r8
-r23_zero:
-	ld.q	r2,8,r4
-	add	r23,r63,r5
-zero_now:
-al_found_zero:
-/* We konw that one of the values has at lest one zero, and r8 holds
-   an 0x01 or 0xff mask for every zero found in one of the operands.
-   If both operands have the first zero in the same place, this mask
-   allows us to truncate the comparison to the valid bytes in the
-   strings.  If the first zero is in different places, it doesn't
-   matter if some invalid bytes are included, since the comparison
-   of the zero with the non-zero will determine the outcome.  */
-#ifdef __LITTLE_ENDIAN__
-	shlli	r8,8,r8
-	addi	r8,-1,r9
-	andc	r9,r8,r8
-	and	r8,r4,r4
-	and	r8,r5,r5
-#else
-	shlri r8,1,r8
-	nsb	r8,r8
-	addi	r8,8,r8
-	andi	r8,56,r8
-	sub	r63,r8,r8
-	shlrd	r4,r8,r4
-	shlrd	r5,r8,r5
-#endif
-#ifdef __LITTLE_ENDIAN__
-	byterev r4,r4
-	byterev r5,r5
-#endif
-	cmpgtu	r4,r5,r6
-	cmpgtu	r5,r4,r7
-	sub	r6,r7,r2
-	blink tr2,r63
-
-#else /* ! __SHMEDIA__, i.e. SH 1..4 / SHcompact */
-
-#ifdef __SH5__
-#define STR1 r2
-#define STR2 r3
-#define RESULT r2
-#define TMP r4
-#else
-! Entry: r4: string1
-!        r5: string2
-! Exit:  r0: result
-!        r1-r2,r4-r5: clobbered
-#define STR1 r4
-#define STR2 r5
-#define RESULT r0
-#define TMP r2
-#endif /* __SH5__ */
-
-	mov     STR1,r0
-	or      STR2,r0
-	tst	#3,r0
-	bf	L_setup_char_loop
-	mov	#0,r0
-#ifdef DELAYED_BRANCHES
-	mov.l	@STR1+,r1
-	.align  2
-Longword_loop:
-	mov.l	@STR2+,TMP
-	cmp/str	r0,r1
-	bt	Longword_loop_end
-	cmp/eq	r1,TMP
-	bt.s	Longword_loop
-	mov.l	@STR1+,r1
-	add #-4, STR1
-Longword_loop_end:
-	add #-4, STR1
-	add #-4, STR2
-L_setup_char_loop:
-	mov.b	@STR1+,r0
-	.align  2
-L_char_loop:
-	mov.b	@STR2+,r1
-	tst	r0,r0
-	bt	L_return
-	cmp/eq	r0,r1
-	bt.s L_char_loop
-	mov.b	@STR1+,r0
-	add	#-2,STR1
-	mov.b	@STR1,r0
-#else /* ! DELAYED_BRANCHES */
-	.align  2
-Longword_loop:
-	mov.l	@r4+,r1
-	mov.l	@r5+,r2
-	cmp/str	r0,r1
-	bt	Longword_loop_end
-	cmp/eq	r1,r2
-	bt	Longword_loop
-Longword_loop_end:
-	add #-4, r4
-	add #-4, r5
-	.align  2
-L_setup_char_loop:
-L_char_loop:
-	mov.b	@r4+,r0
-	mov.b	@r5+,r1
-	tst	r0,r0
-	bt	L_return
-	cmp/eq	r0,r1
-	bt L_char_loop
-#endif
-L_return:
-	extu.b	r0,RESULT
-	extu.b	r1,r1
-	rts
-	sub	r1,RESULT
-#endif /* ! __SHMEDIA__ */
diff --git a/newlib/libc/machine/sh/strcpy.S b/newlib/libc/machine/sh/strcpy.S
deleted file mode 100644
index da951cd03..000000000
--- a/newlib/libc/machine/sh/strcpy.S
+++ /dev/null
@@ -1,134 +0,0 @@
-! Entry: arg0: destination
-!        arg1: source
-! Exit:  result: destination
-!
-! SH5 code Copyright 2002 SuperH Ltd.
-
-#include "asm.h"
-
-ENTRY(strcpy)
-
-#if __SHMEDIA__
-
-	pta/l shortstring,tr1
-	ldlo.q r3,0,r4
-	ptabs r18,tr4
-	shlli r3,3,r7
-	addi r2, 8, r0
-	mcmpeq.b r4,r63,r6
-	SHHI r6,r7,r6
-	bnei/u r6,0,tr1 // shortstring
-	pta/l no_lddst, tr2
-	ori r3,-8,r23
-	sub r2, r23, r0
-	sub r3, r2, r21
-	addi r21, 8, r20
-	ldx.q r0, r21, r5
-	pta/l loop, tr0
-	ori r2,-8,r22
-	mcmpeq.b r5, r63, r6
-	bgt/u r22, r23, tr2 // no_lddst
-
-	// r22 < r23 :  Need to do a load from the destination.
-	// r22 == r23 : Doesn't actually need to load from destination,
-	//              but still can be handled here.
-	ldlo.q r2, 0, r9
-	movi -1, r8
-	SHLO r8, r7, r8
-	mcmv r4, r8, r9
-	stlo.q r2, 0, r9
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-	blink tr1, r63 // shortstring
-no_lddst:
-	// r22 > r23: note that for r22 == r23 the sthi.q would clobber
-	//            bytes before the destination region.
-	stlo.q r2, 0, r4
-	SHHI r4, r7, r4
-	sthi.q r0, -1, r4
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-shortstring:
-#ifndef __LITTLE_ENDIAN__
-	pta/l shortstring2,tr1
-	byterev r4,r4
-#endif
-shortstring2:
-	st.b r0,-8,r4
-	andi r4,0xff,r5
-	shlri r4,8,r4
-	addi r0,1,r0
-	bnei/l r5,0,tr1
-	blink tr4,r63 // return
-	
-	.balign 8
-loop:
-	stlo.q r0, 0, r5
-	ldx.q r0, r20, r4
-	addi r0, 16, r0
-	sthi.q r0, -9, r5
-	mcmpeq.b r4, r63, r6
-	bnei/u r6, 0, tr1 // shortstring
-	ldx.q r0, r21, r5
-	stlo.q r0, -8, r4
-	sthi.q r0, -1, r4
-	mcmpeq.b r5, r63, r6
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-	blink tr1, r63 // shortstring
-
-#else /* ! __SHMEDIA__, i.e. SH 1..4 / SHcompact */
-
-#ifdef __SH5__
-#define DST r2
-#define SRC r3
-#define TMP r4
-#define RESULT R2
-!        r0,r1,r3,r4: clobbered
-#else
-#define DST r4
-#define SRC r5
-#define TMP r2
-#define RESULT r0
-!        r1-r2,r5: clobbered
-#endif
-	mov     DST,r0
-	or      SRC,r0
-	tst	#3,r0
-	SL(bf, L_setup_char_loop, mov DST,r0)
-	mov.l   @SRC+,r1
-	mov     #0,TMP
-	cmp/str TMP,r1
-	SL(bt, Longword_loop_end, sub SRC,r0)
-	.align  2
-Longword_loop:
-	mov.l   r1,@(r0,SRC)
-	mov.l   @SRC+,r1
-	cmp/str TMP,r1
-	bt      Longword_loop_end
-	mov.l   r1,@(r0,SRC)
-	mov.l   @SRC+,r1
-	cmp/str TMP,r1
-	bf      Longword_loop
-Longword_loop_end:
-	add	#-4,SRC
-	add	#3,r0
-	.align  2
-L_char_loop:
-	mov.b	@SRC+,r1
-L_char_loop_start:
-	tst	r1,r1
-	SL(bf, L_char_loop, mov.b r1,@(r0,SRC))
-	rts
-	mov DST,RESULT
-L_setup_char_loop:
-	mov.b	@SRC+,r1
-	bra L_char_loop_start
-	sub SRC,r0
-#endif /* ! __SHMEDIA__ */
diff --git a/newlib/libc/machine/sh/strlen.S b/newlib/libc/machine/sh/strlen.S
deleted file mode 100644
index b55b86b79..000000000
--- a/newlib/libc/machine/sh/strlen.S
+++ /dev/null
@@ -1,87 +0,0 @@
-! Entry: arg0: string start address
-! Exit:  result: length
-!
-! Copyright 2002 SuperH Ltd.
-
-#include "asm.h"
-
-ENTRY(strlen)
-
-#if __SHMEDIA__
-
-	ldlo.q r2,0,r3
-	ptabs/l r18,tr0
-	pta/l loop,tr1
-	andi r2,-8,r0
-	shlli r2,3,r1
-	mcmpeq.b r3,r63,r3
-	SHHI r3,r1,r4
-	beqi/u r4,0,tr1 // loop
-#ifdef __LITTLE_ENDIAN__
-	movi -1,r2
-	addi r3,-1,r4
-	msad.ubq r3,r4,r2
-#else
-	shlri r3,1,r3
-	nsb r3,r3
-	shlri r3,3,r2
-#endif
-	blink tr0,r63
-
-loop:
-	ldlo.q r0,8,r3
-	addi r0,8,r0
-	ldlo.q r0,8,r63
-	mcmpeq.b r3,r63,r3
-	beqi/l r3,0,tr1 // loop
-	sub r0,r2,r2
-#ifdef __LITTLE_ENDIAN__
-	addi r3,-1,r4
-	addi r2,-1,r2
-	msad.ubq r3,r4,r2
-#else
-	shlri r3,1,r3
-	nsb r3,r3
-	shlri r3,3,r3
-	add r2,r3,r2
-#endif
-	blink tr0,r63
-
-#else /* ! __SHMEDIA__, i.e. SH 1..4 / SHcompact */
-
-#ifdef __SH5__
-#define STR_INIT r2
-#define STR_ORIG r0
-#define STR_COPY STR_ORIG
-#define MASK r1
-#define TMP r3
-#define RESULT r2
-!        r0,r1,r3: clobbered
-#else
-#define STR_INIT r4
-#define STR_ORIG STR_INIT
-#define STR_COPY STR
-#define MASK r1
-#define TMP r3
-#define RESULT r0
-!        r1,r3: clobbered
-#endif
-#define STR RESULT
-
-	mov #3,MASK
-	and STR_INIT,MASK
-	tst MASK,MASK
-	SL(bf, L_char_loop, mov STR_INIT, STR_COPY)
-L_word_loop:
-	mov.l @STR+,TMP
-	cmp/str MASK,TMP
-	bf L_word_loop
-	add #-4,STR
-L_char_loop:
-	mov.b @STR+,TMP
-	tst TMP,TMP
-	bf L_char_loop
-	add #-1,STR
-	rts
-	sub STR_ORIG,STR
-#endif /* ! __SHMEDIA__ */
diff --git a/newlib/libc/machine/sh/strncpy.S b/newlib/libc/machine/sh/strncpy.S
deleted file mode 100644
index c22ae661f..000000000
--- a/newlib/libc/machine/sh/strncpy.S
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Copyright 2003 SuperH Ltd.  */
-
-#include "asm.h"
-
-#ifdef __SH5__
-#if __SHMEDIA__
-
-#ifdef __LITTLE_ENDIAN__
-#define ZPAD_MASK(src, dst) addi src, -1, dst
-#else
-#define ZPAD_MASK(src, dst) \
- byterev src, dst; addi dst, -1, dst; byterev dst, dst
-#endif
-
-
-/* We assume that the destination is not in the first 16 bytes of memory.
-   A typical linker script will put the text section first, and as
-   this code is longer that 16 bytes, you have to get out of your way
-    to put data there.  */
-ENTRY(strncpy)
- pt L_small, tr2
- ldlo.q r3, 0, r0
- shlli r3, 3, r19
- mcmpeq.b r0, r63, r1
- SHHI r1, r19, r7
- add r2, r4, r20
- addi r20, -8, r5
- /* If the size is greater than 8, we know we can read beyond the first
-    (possibly partial) quadword, and write out a full first and last
-    (possibly unaligned and/or overlapping) quadword.  */
- bge/u r2, r5, tr2 // L_small
- pt L_found0, tr0
- addi r2, 8, r22
- bnei/u r7, 0, tr0  // L_found0
- ori r3, -8, r38
- pt L_end_early, tr1
- sub r2, r38, r22
- stlo.q r2, 0, r0
- sthi.q r2, 7, r0
- sub r3, r2, r6
- ldx.q r22, r6, r0
- /* Before each iteration, check that we can store in full the next quad we
-    are about to fetch.  */
- addi r5, -8, r36
- bgtu/u r22, r36, tr1 // L_end_early
- pt L_scan0, tr1
-L_scan0:
- addi r22, 8, r22
- mcmpeq.b r0, r63, r1
- stlo.q r22, -8, r0
- bnei/u r1, 0, tr0   // L_found0
- sthi.q r22, -1, r0
- ldx.q r22, r6, r0
- bgeu/l r36, r22, tr1 // L_scan0
-L_end:
- // At end; we might re-read a few bytes when we fetch the last quad.
- // branch mispredict, so load is ready now.
- mcmpeq.b r0, r63, r1
- addi r22, 8, r22
- bnei/u r1, 0, tr0   // L_found0
- add r3, r4, r7
- ldlo.q r7, -8, r1
- ldhi.q r7, -1, r7
- ptabs r18, tr0
- stlo.q r22, -8, r0
- or r1, r7, r1
- mcmpeq.b r1, r63, r7
- sthi.q r22, -1, r0
- ZPAD_MASK (r7, r7)
- and r1, r7, r1 // mask out non-zero bytes after first zero byte
- stlo.q r20, -8, r1
- sthi.q r20, -1, r1
- blink tr0, r63
-
-L_end_early:
- /* Check if we can store the current quad in full.  */
- pt L_end, tr1
- add r3, r4, r7
- bgtu/u r5, r22, tr1 // L_end // Not really unlikely, but gap is short.
- /* If not, that means we can just proceed to process the last quad.
-    Two pipeline stalls are unavoidable, as we don't have enough ILP.  */
- ldlo.q r7, -8, r1
- ldhi.q r7, -1, r7
- ptabs r18, tr0
- or r1, r7, r1
- mcmpeq.b r1, r63, r7
- ZPAD_MASK (r7, r7)
- and r1, r7, r1 // mask out non-zero bytes after first zero byte
- stlo.q r20, -8, r1
- sthi.q r20, -1, r1
- blink tr0, r63
-
-L_found0:
- // r0: string to store, not yet zero-padding normalized.
- // r1: result of mcmpeq.b r0, r63, r1.
- // r22: store address plus 8.  I.e. address where zero padding beyond the
- //      string in r0 goes.
- // r20: store end address.
- // r5: store end address minus 8.
- pt L_write0_multiquad, tr0
- ZPAD_MASK (r1, r1)
- and r0, r1, r0 // mask out non-zero bytes after first zero byte
- stlo.q r22, -8, r0
- sthi.q r22, -1, r0
- andi r22, -8, r1 // Check if zeros to write fit in one quad word.
- bgtu/l r5, r1, tr0 // L_write0_multiquad
- ptabs r18, tr1
- sub r20, r22, r1
- shlli r1, 2, r1 // Do shift in two steps so that 64 bit case is
- SHLO r0, r1, r0 // handled correctly.
- SHLO r0, r1, r0
- sthi.q r20, -1, r0
- blink tr1, r63
-
-L_write0_multiquad:
- pt L_write0_loop, tr0
- ptabs r18, tr1
- stlo.q r22, 0, r63
- sthi.q r20, -1, r63
- addi r1, 8, r1
- bgeu/l r5, r1, tr0 // L_write0_loop
- blink tr1, r63
-
-L_write0_loop:
- st.q r1, 0 ,r63
- addi r1, 8, r1
- bgeu/l r5, r1, tr0 // L_write0_loop
- blink tr1, r63
-
-L_small:
- // r0: string to store, not yet zero-padding normalized.
- // r1: result of mcmpeq.b r0, r63, r1.
- // r7: nonzero indicates relevant zero found r0.
- // r2: store address.
- // r3: read address.
- // r4: size, max 8
- // r20: store end address.
- // r5: store end address minus 8.
- pt L_nohi, tr0
- pt L_small_storelong, tr1
- ptabs r18, tr2
- sub r63, r4, r23
- bnei/u r7, 0, tr0  // L_nohi
- ori r3, -8, r7
- bge/l r23, r7, tr0 // L_nohi
- ldhi.q r3, 7, r1
- or r0, r1, r0
- mcmpeq.b r0, r63, r1
-L_nohi:
- ZPAD_MASK (r1, r1)
- and r0, r1, r0
- movi 4, r19
- bge/u r4, r19, tr1 // L_small_storelong
-
- pt L_small_end, tr0
-#ifndef __LITTLE_ENDIAN__
- byterev r0, r0
-#endif
- beqi/u r4, 0, tr0 // L_small_end
- st.b r2, 0, r0
- beqi/u r4, 1, tr0 // L_small_end
- shlri r0, 8, r0
- st.b r2, 1, r0
- beqi/u r4, 2, tr0 // L_small_end
- shlri r0, 8, r0
- st.b r2, 2, r0
-L_small_end:
- blink tr2, r63
-
-L_small_storelong:
- shlli r23, 3, r7
- SHHI r0, r7, r1
-#ifdef __LITTLE_ENDIAN__
- shlri r1, 32, r1
-#else
- shlri r0, 32, r0
-#endif
- stlo.l r2, 0, r0
- sthi.l r2, 3, r0
- stlo.l r20, -4, r1
- sthi.l r20, -1, r1
- blink tr2, r63
-
-#else /* SHcompact */
-
-/* This code is optimized for size.  Instruction selection is SH5 specific.
-   SH4 should use a different version.  */
-ENTRY(strncpy)
- mov #0, r6
- cmp/eq r4, r6
- bt return
- mov r2, r5
- add #-1, r5
- add r5, r4
-loop:
- bt/s found0
- add #1, r5
- mov.b @r3+, r1
-found0:
- cmp/eq r5,r4
- mov.b r1, @r5
- bf/s loop
- cmp/eq r1, r6
-return:
- rts
- nop
- 
-#endif /* SHcompact */
-#endif /* __SH5__ */
diff --git a/newlib/libc/machine/sparc/Makefile.am b/newlib/libc/machine/sparc/Makefile.am
deleted file mode 100644
index a019f6558..000000000
--- a/newlib/libc/machine/sparc/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = scan.c shuffle.c setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/sparc/Makefile.in b/newlib/libc/machine/sparc/Makefile.in
deleted file mode 100644
index bf5387cbc..000000000
--- a/newlib/libc/machine/sparc/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = scan.c shuffle.c setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  scan.o shuffle.o setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/sparc/aclocal.m4 b/newlib/libc/machine/sparc/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/sparc/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/sparc/configure b/newlib/libc/machine/sparc/configure
deleted file mode 100755
index a4fe25645..000000000
--- a/newlib/libc/machine/sparc/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=shuffle.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/sparc/configure.in b/newlib/libc/machine/sparc/configure.in
deleted file mode 100644
index b0e44c240..000000000
--- a/newlib/libc/machine/sparc/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/sparc configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(shuffle.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/sparc/machine/sparclet.h b/newlib/libc/machine/sparc/machine/sparclet.h
deleted file mode 100644
index 34a0e82ff..000000000
--- a/newlib/libc/machine/sparc/machine/sparclet.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Various stuff for the sparclet processor.
-
-   This file is in the public domain.  */
-
-#ifndef _MACHINE_SPARCLET_H_
-#define _MACHINE_SPARCLET_H_
-
-#ifdef __sparclet__
-
-/* sparclet scan instruction */
-
-extern __inline__ int
-scan (int a, int b)
-{
-  int res;
-  __asm__ ("scan %1,%2,%0" : "=r" (res) : "r" (a), "r" (b));
-  return res;
-}
-
-/* sparclet shuffle instruction */
-
-extern __inline__ int
-shuffle (int a, int b)
-{
-  int res;
-  __asm__ ("shuffle %1,%2,%0" : "=r" (res) : "r" (a), "r" (b));
-  return res;
-}
-
-#endif /* __sparclet__ */
-
-#endif /* _MACHINE_SPARCLET_H_ */
diff --git a/newlib/libc/machine/sparc/scan.c b/newlib/libc/machine/sparc/scan.c
deleted file mode 100644
index d76c0b95f..000000000
--- a/newlib/libc/machine/sparc/scan.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Cover function to sparclet `scan' instruction.
-
-   This file is in the public domain.  */
-
-#ifdef __sparclet__
-
-int
-scan (int a, int b)
-{
-  int res;
-  __asm__ ("scan %1,%2,%0" : "=r" (res) : "r" (a), "r" (b));
-  return res;
-}
-
-#endif
diff --git a/newlib/libc/machine/sparc/setjmp.S b/newlib/libc/machine/sparc/setjmp.S
deleted file mode 100644
index 00d668f91..000000000
--- a/newlib/libc/machine/sparc/setjmp.S
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (c) 1992, 1993
- *      The Regents of the University of California.  All rights reserved.
- *
- *  Modified for incorporation into newlib by Joel Sherrill
- *  (joel@OARcorp.com), On-Line Applications Research, 1995.
- *  Did the following:
- *     + merged in DEFS.h
- *     + removed error check since it prevented using this setjmp
- *       to "context switch" 
- *     + added the support for the "user label" and "register" prefix
- *
- * This software was developed by the Computer Systems Engineering group
- * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
- * contributed to Berkeley.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * from: $Header$
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-        .asciz "@(#)_setjmp.s   8.1 (Berkeley) 6/4/93"
-#endif /* LIBC_SCCS and not lint */
-
-/*
- *  Recent versions of GNU cpp define variables which indicate the
- *  need for underscores and percents.  If not using GNU cpp or
- *  the version does not support this, then you will obviously
- *  have to define these as appropriate.
- */
- 
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
- 
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-/* ANSI concatenation macros.  */
- 
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
- 
-/* Use the right prefix for global labels.  */
- 
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/*********************************************************************
- *********************************************************************
- *                       Contents of DEFS.h                          *
- *********************************************************************
- *********************************************************************/
-
-#ifdef PROF
-#define ENTRY(x) \
-        .align 4; .globl SYM(x); .proc 1; SYM(x):; .data; .align 4; 1: .long 0; \
-        .text; save %sp,-96,%sp; sethi %hi(1b),%o0; call mcount; \
-        or %lo(1b),%o0,%o0; restore
-#else
-#define ENTRY(x) \
-        .align 4; .globl SYM(x); .proc 1; SYM(x):
-#endif
-
-
- 
-/*********************************************************************
- *********************************************************************
- *                           END of DEFS.h                           *
- *********************************************************************
- *********************************************************************/
-
-
-/*
- * C library -- _setjmp, _longjmp
- *
- *      _longjmp(a,v)
- * will generate a "return(v?v:1)" from
- * the last call to
- *      _setjmp(a)
- * by unwinding the call stack.
- * The previous signal state is NOT restored.
- */
-
-
-/* #include "DEFS.h" */
-
-ENTRY(setjmp)
-ENTRY(_setjmp)
-        st      %sp, [%o0]      /* caller's stack pointer */
-        st      %i7, [%o0+4]    /* caller's return pc */
-        st      %fp, [%o0+8]    /* store caller's frame pointer */
-        st      %o7, [%o0+12]
-        retl
-        clr    %o0              ! return 0
-
-ENTRY(longjmp)
-ENTRY(_longjmp)
-        ta      0x03            /* flush registers */
-        addcc   %o1, %g0, %g6   ! compute v ? v : 1 in a global register
-        be,a    0f
-        mov     1, %g6
-0:
-        ld      [%o0], %sp      /* caller's stack pointer */
-
-        ldd     [%sp], %l0
-        ldd     [%sp+8], %l2
-        ldd     [%sp+16], %l4
-        ldd     [%sp+24], %l6
-
-        ldd     [%sp+32], %i0
-        ldd     [%sp+40], %i2
-        ldd     [%sp+48], %i4
-
-        ld      [%o0+4], %i7    /* caller's return pc */
-        ld      [%o0+8], %fp    /* caller's frame pointer */
-        ld      [%o0+12], %o7 
-
-        jmp     %o7 + 8         ! success, return %g6
-        mov     %g6, %o0
-
diff --git a/newlib/libc/machine/sparc/shuffle.c b/newlib/libc/machine/sparc/shuffle.c
deleted file mode 100644
index 2c2ec1cd2..000000000
--- a/newlib/libc/machine/sparc/shuffle.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Cover function to sparclet `shuffle' instruction.
-
-   This file is in the public domain.  */
-
-#ifdef __sparclet__
-
-int
-shuffle (int a, int b)
-{
-  int res;
-  __asm__ ("shuffle %1,%2,%0" : "=r" (res) : "r" (a), "r" (b));
-  return res;
-}
-
-#endif
diff --git a/newlib/libc/machine/tic80/Makefile.am b/newlib/libc/machine/tic80/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/tic80/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/tic80/Makefile.in b/newlib/libc/machine/tic80/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/tic80/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/tic80/aclocal.m4 b/newlib/libc/machine/tic80/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/tic80/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/tic80/configure b/newlib/libc/machine/tic80/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/tic80/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/tic80/configure.in b/newlib/libc/machine/tic80/configure.in
deleted file mode 100644
index c21c4a791..000000000
--- a/newlib/libc/machine/tic80/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/tic80 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/tic80/setjmp.S b/newlib/libc/machine/tic80/setjmp.S
deleted file mode 100644
index 1946344a5..000000000
--- a/newlib/libc/machine/tic80/setjmp.S
+++ /dev/null
@@ -1,50 +0,0 @@
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-	.global SYM (setjmp)
-	.global SYM (_setjmp)
-	.global SYM (longjmp)
-
-	.section  .text,"x"
-	.align 4
-SYM (_setjmp):	
-SYM (setjmp):
-	st.d	0(r2),r20
-	st.d	8(r2),r22
-	st.d	16(r2),r24
-	st.d	24(r2),r26
-	st.d	32(r2),r28
-	st.d	40(r2),r30
-	st	48(r2),r1
-	jsr	r31(r0),r0
-	 addu	0,r0,r2
-
-	.section  .text,"x"
-	.align 4
-SYM (longjmp):
-	ld.d	0(r2),r20
-	ld.d	8(r2),r22
-	ld.d	16(r2),r24
-	ld.d	24(r2),r26
-	ld.d	32(r2),r28
-	ld.d	40(r2),r30
-	bcnd	L1,r4,ne0.w
-	 ld	48(r2),r1
-
-	jsr	r31(r0),r0
-	 addu	1,r0,r2
-L1:
-	jsr	r31(r0),r0
-	 addu	r4,r0,r2
diff --git a/newlib/libc/machine/v850/Makefile.am b/newlib/libc/machine/v850/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/v850/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/v850/Makefile.in b/newlib/libc/machine/v850/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/v850/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/v850/aclocal.m4 b/newlib/libc/machine/v850/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/v850/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/v850/configure b/newlib/libc/machine/v850/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/v850/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/v850/configure.in b/newlib/libc/machine/v850/configure.in
deleted file mode 100644
index 605320d75..000000000
--- a/newlib/libc/machine/v850/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/v850 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/v850/setjmp.S b/newlib/libc/machine/v850/setjmp.S
deleted file mode 100644
index 4b0153749..000000000
--- a/newlib/libc/machine/v850/setjmp.S
+++ /dev/null
@@ -1,47 +0,0 @@
-	.file "setjmp.S"
-
-	.section .text
-	.align 1
-	.global _setjmp
-_setjmp:
-	st.w r1,0[r6]
-	st.w r3,4[r6]
-	st.w r4,8[r6]
-	st.w r20,12[r6]
-	st.w r21,16[r6]
-	st.w r22,20[r6]
-	st.w r23,24[r6]
-	st.w r24,28[r6]
-	st.w r25,32[r6]
-	st.w r26,36[r6]
-	st.w r27,40[r6]
-	st.w r28,44[r6]
-	st.w r29,48[r6]
-	st.w r30,52[r6]
-	st.w r31,56[r6]
-	mov r0, r10
-	jmp [r31]
-
-	.global _longjmp
-_longjmp:
-	ld.w 0[r6],r1
-	ld.w 4[r6],r3
-	ld.w 8[r6],r4
-	ld.w 12[r6],r20
-	ld.w 16[r6],r21
-	ld.w 20[r6],r22
-	ld.w 24[r6],r23
-	ld.w 28[r6],r24
-	ld.w 32[r6],r25
-	ld.w 36[r6],r26
-	ld.w 40[r6],r27
-	ld.w 44[r6],r28
-	ld.w 48[r6],r29
-	ld.w 52[r6],r30
-	ld.w 56[r6],r31
-	cmp r7, r0
-	jne 1f
-	mov 1,r7
-1:
-	mov r7, r10
-	jmp [r31]
diff --git a/newlib/libc/machine/w65/Makefile.am b/newlib/libc/machine/w65/Makefile.am
deleted file mode 100644
index dc3b02f97..000000000
--- a/newlib/libc/machine/w65/Makefile.am
+++ /dev/null
@@ -1,13 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = udivhi3.s umodhi3.s smulhi3.s lshrhi.s sdivhi3.s mulsi3.c \
-	divsi3.c cmpsi.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/w65/Makefile.in b/newlib/libc/machine/w65/Makefile.in
deleted file mode 100644
index a1bd33dfe..000000000
--- a/newlib/libc/machine/w65/Makefile.in
+++ /dev/null
@@ -1,330 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = udivhi3.s umodhi3.s smulhi3.s lshrhi.s sdivhi3.s mulsi3.c \
-	divsi3.c cmpsi.c
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  udivhi3.o umodhi3.o smulhi3.o lshrhi.o sdivhi3.o \
-mulsi3.o divsi3.o cmpsi.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/w65/aclocal.m4 b/newlib/libc/machine/w65/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/w65/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/w65/cmpsi.c b/newlib/libc/machine/w65/cmpsi.c
deleted file mode 100644
index 3773c9d2e..000000000
--- a/newlib/libc/machine/w65/cmpsi.c
+++ /dev/null
@@ -1,28 +0,0 @@
-
-union u {
-  struct {
-  short int msw;
-  unsigned short lsw;
-} w;
-long l;
-};
-
-int
-__cmpsi2(long arga,
-	 short int msw_b, unsigned short int lsw_b)
-{
-  union u u;
-  u.l = arga;
-
-  if (u.w.msw != msw_b)
-    {
-      if (u.w.msw < msw_b) return 0;
-      return 2;
-    }
-  if (u.w.lsw != lsw_b) 
-    {
-      if (u.w.lsw < lsw_b) return 0;
-      return 2;
-    }
-  return 1;
-}
diff --git a/newlib/libc/machine/w65/configure b/newlib/libc/machine/w65/configure
deleted file mode 100755
index 4e1ccde65..000000000
--- a/newlib/libc/machine/w65/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=cmpsi.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/w65/configure.in b/newlib/libc/machine/w65/configure.in
deleted file mode 100644
index 7d3d724d6..000000000
--- a/newlib/libc/machine/w65/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/w65 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(cmpsi.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/w65/divsi3.c b/newlib/libc/machine/w65/divsi3.c
deleted file mode 100644
index bf749923c..000000000
--- a/newlib/libc/machine/w65/divsi3.c
+++ /dev/null
@@ -1,134 +0,0 @@
-
-#define divnorm(num, den, sign) 		\
-{						\
-  if (num < 0) 					\
-    {						\
-      num = -num;				\
-      sign = 1;					\
-    }						\
-  else 						\
-    {						\
-      sign = 0;					\
-    }						\
-						\
-  if (den < 0) 					\
-    {						\
-      den = - den;				\
-      sign = 1 - sign;				\
-    } 						\
-}
-
-
-
-
-
-static unsigned long 
-divmodsi4(int modwanted, unsigned long num, unsigned long den)	
-{						
-  long int bit = 1;				
-  long int res = 0;				
-  long prevden;
-  while (den < num && bit && !(den & (1L<<31)))			       
-    {
-      den <<=1;					
-      bit <<=1;					
-    }						
-  while (bit)
-    {					
-      if (num >= den)
-	{				
-	  num -= den;				
-	  res |= bit;				
-	}						
-      bit >>=1;					
-      den >>=1;					
-    }						
-  if (modwanted) return num;
-  return res;
-}
-
-
-#define exitdiv(sign, res) if (sign) { res = - res;} return res;
-
-long 
-__modsi3 (long numerator, long denominator)
-{
-  int sign = 0;
-  long dividend;
-  long modul;
-
-
-  if (numerator < 0) 
-    {
-      numerator = -numerator;
-      sign = 1;
-    }
-  if (denominator < 0)
-    {
-      denominator = -denominator;
-    }  
-  
-  modul =  divmodsi4 (1, numerator, denominator);
-  if (sign)
-    return - modul;
-  return modul;
-}
-
-
-long 
-__divsi3 (long numerator, long denominator)
-{
-  int sign;
-  long dividend;
-  long modul;
-  divnorm (numerator, denominator, sign);
-
-  dividend = divmodsi4 (0,  numerator, denominator);
-  exitdiv (sign, dividend);
-}
-
-long 
-__umodsi3 (unsigned long numerator, unsigned long denominator)
-{
-  long dividend;
-  long modul;
-
-modul= divmodsi4 (1,  numerator, denominator);
-  return modul;
-}
-
-long 
-__udivsi3 (unsigned long numerator, unsigned long denominator)
-{
-  int sign;
-  long dividend;
-  long modul;
-  dividend =   divmodsi4 (0, numerator, denominator);
-  return dividend;
-}
-
-
-
-
-
-
-#ifdef TEST
-
-
-
-main ()
-{
-  long int i, j, k, m;
-  for (i = -10000; i < 10000; i += 8)
-    {
-      for (j = -10000; j < 10000; j += 11)
-	{
-	  k = i / j;
-	  m = __divsi3 (i, j);
-	  if (k != m)
-	    printf ("fail %d %d %d %d\n", i, j, k, m);
-	}
-    }
-}
-
-#endif
diff --git a/newlib/libc/machine/w65/lshrhi.s b/newlib/libc/machine/w65/lshrhi.s
deleted file mode 100644
index 564229f57..000000000
--- a/newlib/libc/machine/w65/lshrhi.s
+++ /dev/null
@@ -1,48 +0,0 @@
-
-
-	.global	___lshrhi15
-___lshrhi15:
-	lsr	a
-
-	.global	___lshrhi14
-___lshrhi14:		
-	lsr	a	
-	.global	___lshrhi13
-___lshrhi13:	
-	lsr	a	
-	.global	___lshrhi12
-___lshrhi12:	
-	lsr	a	
-	.global	___lshrhi11
-___lshrhi11:	
-	lsr	a	
-	.global	___lshrhi10
-___lshrhi10:	
-	lsr	a	
-	.global	___lshrhi9
-___lshrhi9:	
-	lsr	a	
-	.global	___lshrhi8
-___lshrhi8:	
-	lsr	a	
-	.global	___lshrhi7
-___lshrhi7:	
-	lsr	a	
-	.global	___lshrhi6
-___lshrhi6:	
-	lsr	a	
-	.global	___lshrhi5
-___lshrhi5:	
-	lsr	a	
-	.global	___lshrhi4
-___lshrhi4:	
-	lsr	a	
-	.global	___lshrhi3
-___lshrhi3:	
-	lsr	a	
-	.global	___lshrhi2
-___lshrhi2:
-	lsr	a
-	lsr	a
-	rtl
-
diff --git a/newlib/libc/machine/w65/mulsi3.c b/newlib/libc/machine/w65/mulsi3.c
deleted file mode 100644
index b48fe97ac..000000000
--- a/newlib/libc/machine/w65/mulsi3.c
+++ /dev/null
@@ -1,17 +0,0 @@
-
-
-long
-__mulsi3(unsigned long a, unsigned long b)
-{
-  long res = 0;
-  while (a) 
-    {
-      if (a & 1)
-	{
-	  res += b;
-	}
-      b <<= 1;
-      a >>=1;
-    }
-  return res;
-}
diff --git a/newlib/libc/machine/w65/sdivhi3.s b/newlib/libc/machine/w65/sdivhi3.s
deleted file mode 100644
index 7958f11e7..000000000
--- a/newlib/libc/machine/w65/sdivhi3.s
+++ /dev/null
@@ -1,35 +0,0 @@
-	.global	___sdivhi3
-
-___sdivhi3:
-	lda	<r4
-	ldx	<r5		
-
-	ldy	#0		!flag positive result
-	rol	a
-	ror	a
-	bpl	L10
-
-	iny			!flag negative result
-	eor	#0xFFFF
-	inc	a
-
-L10:	pha
-	txa
-	bpl	L20
-
-	dey			!flag negative/positive result
-	eor	#0xFFFF
-	inc	a
-	tax
-
-L20:	pla
-	phy
-	jsr	>udv
-	ply
-	beq	Lend		!if positive result
-
-	eor	#0xFFFF		!negate result
-	inc	a
-
-Lend:	sta	<r0
-	rtl
diff --git a/newlib/libc/machine/w65/smulhi3.s b/newlib/libc/machine/w65/smulhi3.s
deleted file mode 100644
index 6ccbfba01..000000000
--- a/newlib/libc/machine/w65/smulhi3.s
+++ /dev/null
@@ -1,20 +0,0 @@
-	.global	___smulhi3
-___smulhi3:	
-
-
-	
-	lda	#0
-mult1:	ldx	<r4
-	beq	done
-	lsr	<r4
-	bcc	mult2
-	clc
-	adc	<r5
-
-mult2:	asl	<r5
-	bra	mult1
-
-done:	sta	<r0
-	rtl
-
-
diff --git a/newlib/libc/machine/w65/udivhi3.s b/newlib/libc/machine/w65/udivhi3.s
deleted file mode 100644
index 07d091e80..000000000
--- a/newlib/libc/machine/w65/udivhi3.s
+++ /dev/null
@@ -1,30 +0,0 @@
-	.global	___udivhi3
-
-___udivhi3:
-	stz	<r0
-	ldy	#1
-	ldx	<r4
-	lda	<r5
-	
-div1:	
-	asl	a
-	bcs	div2
-	iny
-	cpy	#17
-	bne	div1
-
-div2:	ror	a
-
-div4:	pha
-	txa
-	sec
-	sbc	1,s
-	bcc	div3
-	tax
-
-div3:	rol	<r0
-	pla
-	lsr	a
-	dey
-	bne	div4
-	rtl
diff --git a/newlib/libc/machine/w65/umodhi3.s b/newlib/libc/machine/w65/umodhi3.s
deleted file mode 100644
index 1d12df524..000000000
--- a/newlib/libc/machine/w65/umodhi3.s
+++ /dev/null
@@ -1,7 +0,0 @@
-	.global	___umodhi3
-
-___umodhi3:
-	jsr	>___udivhi3
-	stx	<r0
-	rtl
-
diff --git a/newlib/libc/machine/xscale/Makefile.am b/newlib/libc/machine/xscale/Makefile.am
deleted file mode 100644
index eaa413a88..000000000
--- a/newlib/libc/machine/xscale/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	memchr.c memcmp.c memcpy.c memmove.c memset.c \
-	strchr.c strcmp.c strcpy.c strlen.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/xscale/Makefile.in b/newlib/libc/machine/xscale/Makefile.in
deleted file mode 100644
index a45472c9e..000000000
--- a/newlib/libc/machine/xscale/Makefile.in
+++ /dev/null
@@ -1,331 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	memchr.c memcmp.c memcpy.c memmove.c memset.c \
-	strchr.c strcmp.c strcpy.c strlen.c
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  memchr.o memcmp.o memcpy.o memmove.o memset.o strchr.o \
-strcmp.o strcpy.o strlen.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/xscale/aclocal.m4 b/newlib/libc/machine/xscale/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/xscale/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/xscale/configure b/newlib/libc/machine/xscale/configure
deleted file mode 100755
index 6afd35773..000000000
--- a/newlib/libc/machine/xscale/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=Makefile.am
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/xscale/configure.in b/newlib/libc/machine/xscale/configure.in
deleted file mode 100644
index edcfe6b9b..000000000
--- a/newlib/libc/machine/xscale/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/strongarm2 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(Makefile.am)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/xscale/machine/profile.h b/newlib/libc/machine/xscale/machine/profile.h
deleted file mode 100644
index 90198ba69..000000000
--- a/newlib/libc/machine/xscale/machine/profile.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* profile.h
-
-   Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- 
-   Permission to use, copy, modify, and distribute this software
-   is freely granted, provided that this notice is preserved.  */
-
-#ifndef __XSCALE_PROFILE_H__
-#define __XSCALE_PROFILE_H__
-
-/* FIXME:
-   We need to create a string version of the CPP predefined
-   __USER_LABEL_PREFIX__ macro.  Ideally we would like to
-   so do something like:
-
-     #if  __USER_LABEL_PREFIX__ == _
-
-   but this fails for arm-elf targets because although
-   __USER_LABEL__PREFIX__ is defined, it is not defined to
-   a specific value (even 0) and so the above test fails
-   with:
-   
-      operator '==' has no left operand
-
-  Instead we have to test the CPP predefined __ELF__ and
-  rely upon the *assumption* that ELF targets will not use
-  an underscore prefix and that COFF targets will.  */
-
-#ifdef __ELF__
-#define FOO ""
-#else
-#define FOO "_"
-#endif
-
-#define _MCOUNT_DECL(frompc, selfpc) \
-void __attribute__ ((no_instrument_function)) \
-mcount_internal (frompc, selfpc)
-
-/* mcount_internal expects two arguments
-   r0 frompc (return address for function that call function that calls mcount)
-   r1 selfpc (return address for function that called mcount)
-
-   The frompc is extracted from the stack frames. If the code does not
-   generate stack frames, then mcount cannot extract this
-   information. Thus, the -fomit-frame-pointer optimization cannot be
-   used if a call graph information is required.
-
-   Due to optimizations mcount doesn't set up a new fp. mcount has the fp
-   of the calling function.
-
-   r0 frompc is from the current frame
-   r1 selfpc can be obtained directly from lr.  */
-
-#ifdef __thumb__
-#define MCOUNT					\
-void __attribute__ ((naked))			\
-     __attribute__ ((no_instrument_function))	\
-mcount (void)					\
-{						\
-  __asm__("push {r0, r1, r2, r3, lr};"		\
-	  "add r0, r7, #0;"			\
-	  "beq 1f;"				\
-	  "sub r0, r0, #4;"			\
-	  "ldr r0, [r0];"			\
-	  "1: mov r1, lr;"			\
-	  "bl " FOO "mcount_internal ;"		\
-	  "pop {r0, r1, r2, r3, pc};"		\
-	);					\
-}
-#else
-#define MCOUNT					\
-void __attribute__ ((naked))			\
-     __attribute__ ((no_instrument_function))	\
-mcount (void)					\
-{						\
-  __asm__("stmdb sp!, {r0, r1, r2, r3, lr};"	\
-	  "movs r0, fp;"			\
-	  "ldrne r0, [r0, #-4];"		\
-	  "mov r1, lr;"				\
-	  "bl " FOO "mcount_internal ;" 	\
-          "ldmia sp!, {r0, r1, r2, r3, pc};"	\
-	);					\
-}
-#endif
-
-#define FUNCTION_ALIGNMENT 2
-
-#endif /* !__XSCALE_PROFILE_H__ */
diff --git a/newlib/libc/machine/xscale/memchr.c b/newlib/libc/machine/xscale/memchr.c
deleted file mode 100644
index 9bf18268b..000000000
--- a/newlib/libc/machine/xscale/memchr.c
+++ /dev/null
@@ -1,102 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/memchr.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-void *
-memchr (const void *start, int c, size_t len)
-{
-  const char *str = start;
-
-  if (len == 0)
-    return 0;
-
-  asm (PRELOADSTR ("%0") : : "r" (start));
-
-  c &= 0xff;
-
-#ifndef __OPTIMIZE_SIZE__
-  /* Skip unaligned part.  */
-  if ((long)str & 3)
-    {
-      str--;
-      do
-	{
-	  if (*++str == c)
-	    return (void *)str;
-	}
-      while (((long)str & 3) != 0 && --len > 0);
-    }
-
-  if (len > 3)
-    {
-      unsigned int c2 = c + (c << 8);
-      c2 += c2 << 16;
-
-      /* Load two constants:
-         R7 = 0xfefefeff [ == ~(0x80808080 << 1) ]
-         R6 = 0x80808080  */
-
-      asm (
-       "mov	r6, #0x80\n\
-	add	r6, r6, #0x8000\n\
-	add	r6, r6, r6, lsl #16\n\
-	mvn	r7, r6, lsl #1\n\
-\n\
-0:\n\
-	cmp	%1, #0x7\n\
-	bls	1f\n\
-\n\
-	ldmia	%0!, { r3, r9 }\n\
-"	PRELOADSTR ("%0") "\n\
-	sub	%1, %1, #8\n\
-	eor	r3, r3, %2\n\
-	eor	r9, r9, %2\n\
-	add	r2, r3, r7\n\
-	add	r8, r9, r7\n\
-	bic	r2, r2, r3\n\
-	bic	r8, r8,	r9\n\
-	and	r1, r2, r6\n\
-	and	r9, r8, r6\n\
-	orrs	r1, r1, r9\n\
-	beq	0b\n\
-\n\
-	add	%1, %1, #8\n\
-	sub	%0, %0, #8\n\
-1:\n\
-	cmp	%1, #0x3\n\
-	bls	2f\n\
-\n\
-	ldr	r3, [%0], #4\n\
-"	PRELOADSTR ("%0") "\n\
-	sub	%1, %1, #4\n\
-	eor	r3, r3, %2\n\
-	add	r2, r3, r7\n\
-	bic	r2, r2, r3\n\
-	ands	r1, r2, r6\n\
-	beq	1b\n\
-\n\
-	sub	%0, %0, #4\n\
-	add	%1, %1, #4\n\
-2:\n\
-"
-       : "=&r" (str), "=&r" (len)
-       : "r" (c2), "0" (str), "1" (len)
-       : "r1", "r2", "r3", "r6", "r7", "r8", "r9", "cc");
-    }
-#endif
-
-  while (len-- > 0)
-    { 
-      if (*str == c)
-        return (void *)str;
-      str++;
-    } 
-
-  return 0;
-}
-#endif
diff --git a/newlib/libc/machine/xscale/memcmp.c b/newlib/libc/machine/xscale/memcmp.c
deleted file mode 100644
index 1eba4b8dd..000000000
--- a/newlib/libc/machine/xscale/memcmp.c
+++ /dev/null
@@ -1,112 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/memcmp.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-int
-memcmp (const void * s1, const void * s2, size_t len)
-{
-  int result;
-  asm (
-#ifndef __OPTIMIZE_SIZE__ 
-"\n\
-	cmp	%2, #0x3	@ Is the length a multiple of four ?\n\
-	bls	6f		@ no  = goto SLOW CHECK\n\
-	and	r2, %0, #0x3	@ get alignment of first pointer\n\
-	and	r3, %1, #0x3	@ get alignment of second pointer\n\
-	cmp	r2, r3		@ Do the two pointers share the same alignment ?\n\
-	bne	6f		@ no = goto SLOW CHECK\n\
-	mov	lr, %0		@ copy first pointer into LR\n\
-	mov	r4, %1		@ copy second pointer into R4\n\
-	cmp	r2, #0x0	@ Are we comparing word aligned pointers ?\n\
-	beq	3f		@ yes = goto START WORD CHECK LOOP\n\
-	b	1f		@ jump to LOOP TEST\n\
-0:			       @ LOOP START\n\
-	ldrb	r2, [lr], #1	@ load byte from LR, post inc.\n\
-"	PRELOADSTR("lr") "	@ preload\n\
-	ldrb	r3, [r4], #1	@ load byte from R4, post inc.\n\
-"	PRELOADSTR("r4") "	@ preload\n\
-	cmp	r2, r3		@ are the two bytes the same ?\n\
-	bne	5f		@ no = goto EXIT\n\
-	tst	lr, #0x3	@ has the LR become word aligned ?\n\
-	bne     1f		@ no = skip the next test\n\
-	cmp     %2, #4		@ is the count >= 4 ?\n\
-	bhs     3f		@ yes = goto START WORD CHECK LOOP\n\
-1:			       @ LOOP TEST\n\
-	sub	%2, %2, #1	@ decrement count by one\n\
-	cmn	%2, #0x1	@ has the count reached -1 ?\n\
-	bne	0b		@ no = loop back to LOOP START\n\
-	b	4f		@ goto PASS END\n\
-\n\
-0:			       @ ??\n\
-	cmp	%2, #0x7	@ Is the count a multiple of 8 ?\n\
-	bls	3f		@ no = goto ???\n\
-	ldmia	lr,{r2, r3}	@ get two words from first pointer, post inc\n\
-	ldmia	r4,{r5, r6}	@ get two words from second pointer, post inc\n\
-	sub	%2, %2, #0x4	@ decrement count by 4\n\
-	cmp	r2, r5		@ has the count reached ????\n\
-	bne	1f		@ no = goto\n\
-	sub	%2, %2, #0x4	@ decrement the count by 4\n\
-	add	lr, lr, #0x4	@ add 4 to first pointer\n\
-	add	r4, r4, #0x4	@ add 4 to second pointer\n\
-	cmp	r3, r6		@ ???\n\
-	beq	0b		@ goto ???\n\
-1:			       @ ??\n\
-	add	%2, %2, #0x4	@ Add four to count\n\
-	sub	%0, lr, #0x4	@ decrement first pointer by 4\n\
-	sub	%1, r4, #0x4	@ decrement second pointer by 4\n\
-	b	6f		@ goto SLOW CHECK\n\
-\n\
-3:			       @ START WORD CHECK LOOP\n\
-	cmp	%2, #0x3	@ is the count <= 3 ?\n\
-	bls	1f		@ yes = goto CHECK BYTES BY HAND\n\
-	ldr	r2, [lr], #4	@ get word from LR, post inc\n\
-	ldr	r3, [r4], #4	@ get word from R4, post inc\n\
-	sub	%2, %2, #4	@ decrement count by 4\n\
-	cmp	r2, r3		@ are the two words the same ?\n\
-	bne	1f		@ no = goto CHECK WORD CONTENTS\n\
-0:			       @ WORD CHECK LOOP\n\
-	cmp	%2, #0x3	@ is the count <= 3 ?\n\
-	bls	1f		@ yes = goto CHECK BYTES BY HAND\n\
-	ldr	r2, [lr], #4	@ load word from LR, post inc\n\
-"	PRELOADSTR("lr") "	@ preload\n\
-	ldr	r3, [r4], #4	@ load word from R4, post inc\n\
-"	PRELOADSTR("r4") "	@ preload\n\
-	sub	%2, %2, #4	@ decrement count by 4\n\
-	cmp	r2, r3		@ are the two words the same ?\n\
-	beq	0b		@ yes = goto WORD CHECK LOOP\n\
-1:			       @ CHECK BYTES BY HAND\n\
-	sub	%0, lr, #0x4	@ move LR back a word and put into first pointer\n\
-	sub	%1, r4, #0x4	@ move R4 back a word and put into second pointer\n\
-	add	%2, %2, #4	@ increment the count by 4\n\
-				@ fall through into SLOW CHECK"
-#endif /* !__OPTIMIZE_SIZE__ */
-"\n\
-6:			       @ SLOW CHECK\n\
-	sub	%2, %2, #1	@ Decrement the count by one\n\
-	cmn	%2, #0x1	@ Has the count reached -1 ?\n\
-	beq	4f		@ Yes - we are finished, goto PASS END\n\
-0:			       @ LOOP1\n\
-	ldrb	r2, [%0], #1	@ get byte from first pointer\n\
-"	PRELOADSTR("%0") "	@ preload first pointer\n\
-	ldrb	r3, [%1], #1	@ get byte from second pointer\n\
-"	PRELOADSTR("%1") "	@ preload second pointer\n\
-	cmp	r2, r3		@ compare the two loaded bytes\n\
-	bne	5f		@ if they are not equal goto EXIT\n\
-	sub	%2, %2, #1	@ decremented count by 1\n\
-	cmn	%2, #0x1	@ has the count reached -1 ?\n\
-	bne	0b		@ no = then go back to LOOP1\n\
-4:			       @ PASS END\n\
-	mov	r3, r2		@ Default return value is 0\n\
-5:			       @ EXIT\n\
-	rsb	%0, r3, r2	@ return difference between last two bytes loaded"
-       : "=r" (result), "=&r" (s2), "=&r" (len)
-       : "0" (s1), "1" (s2), "2" (len)
-       : "r2", "r3", "r4", "r5", "r6", "cc", "lr");
-  return result;
-}
-#endif
diff --git a/newlib/libc/machine/xscale/memcpy.c b/newlib/libc/machine/xscale/memcpy.c
deleted file mode 100644
index 1a3297778..000000000
--- a/newlib/libc/machine/xscale/memcpy.c
+++ /dev/null
@@ -1,101 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/memcpy.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-void *
-memcpy (void *dst0, const void *src0, size_t len)
-{
-  int dummy;
-  asm volatile (
-#ifndef __OPTIMIZE_SIZE__
-       "cmp	%2, #0x3\n\
-	bls	3f\n\
-	and	lr, %1, #0x3\n\
-	and	r3, %0, #0x3\n\
-	cmp	lr, r3\n\
-	bne	3f\n\
-	cmp	lr, #0x0\n\
-	beq	2f\n\
-	b	1f\n\
-0:\n\
-	ldrb	r3, [%1], #1\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	tst	%1, #0x3\n\
-	strb	r3, [%0], #1\n\
-	beq	3f\n\
-1:\n\
-	sub	%2, %2, #1\n\
-	cmn	%2, #1\n\
-	bne	0b\n\
-2:\n\
-	cmp	%2, #0xf\n\
-	bls	1f\n\
-0:\n\
-	ldmia	%1!, { r3, r4, r5, lr }\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	sub	%2, %2, #16\n\
-	cmp	%2, #0xf\n\
-	stmia	%0!, { r3, r4, r5, lr }\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x7\n\
-	bls	1f\n\
-0:\n\
-	ldmia	%1!, { r3, r4 }\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	sub	%2, %2, #8\n\
-	cmp	%2, #0x7\n\
-	stmia	%0!, { r3, r4 }\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x3\n\
-	bls	3f\n\
-0:\n\
-	sub	%2, %2, #4\n\
-	ldr	r3, [%1], #4\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	cmp	%2, #0x3\n\
-	str	r3, [%0], #4\n\
-	bhi	0b\n\
-"
-#endif /* !__OPTIMIZE_SIZE__ */
-"\n\
-3:\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	sub	%2, %2, #1\n\
-	cmn	%2, #1\n\
-	beq	1f\n\
-0:\n\
-	sub	%2, %2, #1\n\
-	ldrb	r3, [%1], #1\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	cmn	%2, #1\n\
-	strb	r3, [%0], #1\n\
-	bne	0b\n\
-1:"
-       : "=&r" (dummy), "=&r" (src0), "=&r" (len)
-       : "0" (dst0), "1" (src0), "2" (len)
-       : "memory", "lr", "r3", "r4", "r5", "cc");
-  return dst0;
-}
-#endif
diff --git a/newlib/libc/machine/xscale/memmove.c b/newlib/libc/machine/xscale/memmove.c
deleted file mode 100644
index 04d1a14d2..000000000
--- a/newlib/libc/machine/xscale/memmove.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/memmove.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-static inline void *
-do_memcpy (void *dst0, const void *src0, size_t len)
-{
-  int dummy;
-  asm volatile (
-#ifndef __OPTIMIZE_SIZE__
-       "cmp	%2, #0x3\n\
-	bls	3f\n\
-	and	lr, %1, #0x3\n\
-	and	r3, %0, #0x3\n\
-	cmp	lr, r3\n\
-	bne	3f\n\
-	cmp	lr, #0x0\n\
-	beq	2f\n\
-	b	1f\n\
-0:\n\
-	ldrb	r3, [%1], #1\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	tst	%1, #0x3\n\
-	strb	r3, [%0], #1\n\
-	beq	3f\n\
-1:\n\
-	sub	%2, %2, #1\n\
-	cmn	%2, #1\n\
-	bne	0b\n\
-2:\n\
-	cmp	%2, #0xf\n\
-	bls	1f\n\
-0:\n\
-	ldmia	%1!, { r3, r4, r5, lr }\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	sub	%2, %2, #16\n\
-	cmp	%2, #0xf\n\
-	stmia	%0!, { r3, r4, r5, lr }\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x7\n\
-	bls	1f\n\
-0:\n\
-	ldmia	%1!, { r3, r4 }\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	sub	%2, %2, #8\n\
-	cmp	%2, #0x7\n\
-	stmia	%0!, { r3, r4 }\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x3\n\
-	bls	3f\n\
-0:\n\
-	sub	%2, %2, #4\n\
-	ldr	r3, [%1], #4\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-\n\
-	cmp	%2, #0x3\n\
-	str	r3, [%0], #4\n\
-	bhi	0b\n\
-"
-#endif /* !__OPTIMIZE_SIZE__ */
-"\n\
-3:\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	sub	%2, %2, #1\n\
-	cmn	%2, #1\n\
-	beq	1f\n\
-0:\n\
-	sub	%2, %2, #1\n\
-	ldrb	r3, [%1], #1\n\
-"
-	PRELOADSTR ("%1")
-"\n\
-	cmn	%2, #1\n\
-	strb	r3, [%0], #1\n\
-	bne	0b\n\
-1:"
-       : "=&r" (dummy), "=&r" (src0), "=&r" (len)
-       : "0" (dst0), "1" (src0), "2" (len)
-       : "memory", "lr", "r3", "r4", "r5", "cc");
-  return dst0;
-}
-
-void *
-memmove (void *dst, const void *src, size_t len)
-{
-  char *d = dst;
-  const char *s = src;
-
-  if (s < d && d < s + len)
-    {
-      /* Destructive overlap...have to copy backwards.  */
-      s += len;
-      d += len;
-
-      while (len--)
-	*--d = *--s;
-
-      return dst;
-    }
-  else
-    return do_memcpy (dst, src, len);
-}
-#endif
diff --git a/newlib/libc/machine/xscale/memset.c b/newlib/libc/machine/xscale/memset.c
deleted file mode 100644
index 4ff8d01e0..000000000
--- a/newlib/libc/machine/xscale/memset.c
+++ /dev/null
@@ -1,89 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/memset.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-void *
-memset (void *dst, int c, size_t len)
-{
-  int dummy;
-
-  asm volatile ("tst	%0, #0x3"
-#ifndef __OPTIMIZE_SIZE__
-"\n\
-	beq	1f\n\
-	b	2f\n\
-0:\n\
-	strb	%1, [%0], #1\n\
-	tst	%0, #0x3\n\
-	beq	1f\n\
-2:\n\
-	movs	r3, %2\n\
-	sub	%2, %2, #1\n\
-	bne	0b\n\
-# At this point we know that %2 == len == -1 (since the SUB has already taken\n\
-# place).  If we fall through to the 1: label (as the code used to do), the\n\
-# CMP will detect this negative value and branch to the 2: label.  This will\n\
-# test %2 again, but this time against 0.  The test will fail and the loop\n\
-# at 2: will go on for (almost) ever.  Hence the explicit branch to the end\n\
-# of the hand written assembly code.\n\
-	b       4f\n\
-1:\n\
-	cmp	%2, #0x3\n\
-	bls	2f\n\
-	and	%1, %1, #0xff\n\
-	orr	lr, %1, %1, asl #8\n\
-	cmp	%2, #0xf\n\
-	orr	lr, lr, lr, asl #16\n\
-	bls	1f\n\
-	mov	r3, lr\n\
-	mov	r4, lr\n\
-	mov	r5, lr\n\
-0:\n\
-	sub	%2, %2, #16\n\
-	stmia	%0!, { r3, r4, r5, lr }\n\
-	cmp	%2, #0xf\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x7\n\
-	bls	1f\n\
-	mov	r3, lr\n\
-0:\n\
-	sub	%2, %2, #8\n\
-	stmia	%0!, { r3, lr }\n\
-	cmp	%2, #0x7\n\
-	bhi	0b\n\
-1:\n\
-	cmp	%2, #0x3\n\
-	bls	2f\n\
-0:\n\
-	sub	%2, %2, #4\n\
-	str	lr, [%0], #4\n\
-	cmp	%2, #0x3\n\
-	bhi	0b\n\
-"
-#endif /* !__OPTIMIZE_SIZE__ */
-"\n\
-2:\n\
-	movs	r3, %2\n\
-	sub	%2, %2, #1\n\
-	beq	4f\n\
-0:\n\
-	movs	r3, %2\n\
-	sub	%2, %2, #1\n\
-	strb	%1, [%0], #1\n\
-	bne	0b\n\
-4:"
-
-       : "=&r" (dummy), "=&r" (c), "=&r" (len)
-       : "0" (dst), "1" (c), "2" (len)
-       : "memory", "r3", "r4", "r5", "lr");
-
-  return dst;
-}
- 
-#endif
diff --git a/newlib/libc/machine/xscale/strchr.c b/newlib/libc/machine/xscale/strchr.c
deleted file mode 100644
index 3b736c53c..000000000
--- a/newlib/libc/machine/xscale/strchr.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/strchr.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-char *
-strchr (const char *s, int c)
-{
-  unsigned int c2;
-  asm (PRELOADSTR ("%0") : : "r" (s));
-
-  c &= 0xff;
-
-#ifndef __OPTIMIZE_SIZE__
-  /* Skip unaligned part.  */
-  if ((long)s & 3)
-    {
-      s--;
-      do
-	{
-	  int c2 = *++s;
-	  if (c2 == c)
-	    return (char *)s;
-	  if (c2 == '\0')
-	    return 0;
-	}
-      while (((long)s & 3) != 0);
-    }
-
-  c2 = c + (c << 8);
-  c2 += c2 << 16;
-
-  /* Load two constants:
-     R6 = 0xfefefeff [ == ~(0x80808080 << 1) ]
-     R5 = 0x80808080  */
-
-  asm (PRELOADSTR ("%0") "\n\
-	mov	r5, #0x80\n\
-	add	r5, r5, #0x8000\n\
-	add	r5, r5, r5, lsl #16\n\
-	mvn	r6, r5, lsl #1\n\
-\n\
-	sub	%0, %0, #4\n\
-0:\n\
-	ldr	r1, [%0, #4]!\n\
-"	PRELOADSTR ("%0") "\n\
-	add	r3, r1, r6\n\
-	bic	r3, r3, r1\n\
-	ands	r2, r3, r5\n\
-	bne	1f\n\
-	eor	r2, r1, %1\n\
-	add	r3, r2, r6\n\
-	bic	r3, r3, r2\n\
-	ands	r1, r3, r5\n\
-	beq	0b\n\
-1:"
-       : "=&r" (s)
-       : "r" (c2), "0" (s)
-       : "r1", "r2", "r3", "r5", "r6", "cc");
-#endif
-
-  while (*s && *s != c)
-    s++;
-  if (*s == c)
-    return (char *)s;
-  return NULL;
-}
-
-#endif
diff --git a/newlib/libc/machine/xscale/strcmp.c b/newlib/libc/machine/xscale/strcmp.c
deleted file mode 100644
index 6c94d126f..000000000
--- a/newlib/libc/machine/xscale/strcmp.c
+++ /dev/null
@@ -1,107 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/strcmp.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-int
-strcmp (const char *s1, const char *s2)
-{
-  asm (PRELOADSTR ("%0") : : "r" (s1));
-  asm (PRELOADSTR ("%0") : : "r" (s2));
-
-#ifndef __OPTIMIZE_SIZE__
-  if (((long)s1 & 3) == ((long)s2 & 3))
-    {
-      int result;
-
-      /* Skip unaligned part.  */
-      while ((long)s1 & 3)
-	{
-	  if (*s1 == '\0' || *s1 != *s2)
-	    goto out;
-	  s1++;
-	  s2++;
-	}
-
-  /* Load two constants:
-     lr = 0xfefefeff [ == ~(0x80808080 << 1) ]
-     ip = 0x80808080  */
-
-      asm (
-       "ldr	r2, [%1, #0]\n\
-	ldr	r3, [%2, #0]\n\
-	cmp	r2, r3\n\
-	bne	2f\n\
-\n\
-	mov	ip, #0x80\n\
-	add	ip, ip, #0x8000\n\
-	add	ip, ip, ip, lsl #16\n\
-	mvn	lr, ip, lsl #1\n\
-\n\
-0:\n\
-	ldr	r2, [%1, #0]\n\
-	add	r3, r2, lr\n\
-	bic	r3, r3, r2\n\
-	tst	r3, ip\n\
-	beq	1f\n\
-	mov	%0, #0x0\n\
-	b	3f\n\
-1:\n\
-	ldr	r2, [%1, #4]!\n\
-	ldr	r3, [%2, #4]!\n\
-"	PRELOADSTR("%1") "\n\
-"	PRELOADSTR("%2") "\n\
-	cmp	r2, r3\n\
-	beq	0b"
-
-       /* The following part could be done in a C loop as well, but it needs
-	  to be assembler to save some cycles in the case where the optimized
-	  loop above finds the strings to be equal.  */
-"\n\
-2:\n\
-	ldrb	r2, [%1, #0]\n\
-"	PRELOADSTR("%1") "\n\
-"	PRELOADSTR("%2") "\n\
-	cmp	r2, #0x0\n\
-	beq	1f\n\
-	ldrb	r3, [%2, #0]\n\
-	cmp	r2, r3\n\
-	bne	1f\n\
-0:\n\
-	ldrb	r3, [%1, #1]!\n\
-	add	%2, %2, #1\n\
-	ands	ip, r3, #0xff\n\
-	beq	1f\n\
-	ldrb	r3, [%2]\n\
-	cmp	ip, r3\n\
-	beq	0b\n\
-1:\n\
-	ldrb	lr, [%1, #0]\n\
-	ldrb	ip, [%2, #0]\n\
-	rsb	%0, ip, lr\n\
-3:\n\
-"
-
-       : "=r" (result), "=&r" (s1), "=&r" (s2)
-       : "1" (s1), "2" (s2)
-       : "lr", "ip", "r2", "r3", "cc");
-      return result;
-    }
-#endif
-
-  while (*s1 != '\0' && *s1 == *s2)
-    {
-      asm (PRELOADSTR("%0") : : "r" (s1));
-      asm (PRELOADSTR("%0") : : "r" (s2));
-      s1++;
-      s2++;
-    }
- out:
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-}
-
-#endif
diff --git a/newlib/libc/machine/xscale/strcpy.c b/newlib/libc/machine/xscale/strcpy.c
deleted file mode 100644
index 46db2ba6a..000000000
--- a/newlib/libc/machine/xscale/strcpy.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#if defined __thumb__
-
-#include "../../string/strcpy.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-char *
-strcpy (char *dest, const char *src)
-{
-  char *dest0 = dest;
-
-  asm (PRELOADSTR ("%0") : : "r" (src));
-
-#ifndef __OPTIMIZE_SIZE__
-  if (((long)src & 3) == ((long)dest & 3))
-    {
-      /* Skip unaligned part.  */
-      while ((long)src & 3)
-	{
-	  if (! (*dest++ = *src++))
-	    return dest0;
-	}
-
-  /* Load two constants:
-     R4 = 0xfefefeff [ == ~(0x80808080 << 1) ]
-     R5 = 0x80808080  */
-
-  asm ("mov	r5, #0x80\n\
-	ldr	r1, [%1, #0]\n\
-	add	r5, r5, #0x8000\n\
-	add	r5, r5, r5, lsl #16\n\
-	mvn	r4, r5, lsl #1\n\
-\n\
-	add	r3, r1, r5\n\
-	bic	r3, r3, r1\n\
-	ands	r2, r3, r4\n\
-	bne	1f\n\
-0:\n\
-	ldr	r3, [%1, #0]\n\
-	ldr	r1, [%1, #4]!\n\
-"	PRELOADSTR("%1") "\n\
-	str	r3, [%0], #4\n\
-	add	r2, r1, r4\n\
-	bic	r2, r2, r1\n\
-	ands	r3, r2, r5\n\
-	beq	0b\n\
-1:"
-       : "=&r" (dest), "=&r" (src)
-       : "0" (dest), "1" (src)
-       : "r1", "r2", "r3", "r4", "r5", "memory", "cc");
-    }
-#endif
-
-  while (*dest++ = *src++)
-    asm (PRELOADSTR ("%0") : : "r" (src));
-  return dest0;
-}
-
-#endif
diff --git a/newlib/libc/machine/xscale/strlen.c b/newlib/libc/machine/xscale/strlen.c
deleted file mode 100644
index a8bc0851d..000000000
--- a/newlib/libc/machine/xscale/strlen.c
+++ /dev/null
@@ -1,100 +0,0 @@
-#if defined __thumb__ || defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-
-#include "../../string/strlen.c"
-
-#else
-
-#include <string.h>
-#include "xscale.h"
-
-size_t
-strlen (const char *str)
-{
-  _CONST char *start = str;
-
-  /* Skip unaligned part.  */
-  if ((long)str & 3)
-    {
-      str--;
-      do
-	{
-	  if (*++str == '\0')
-	    goto out;
-	}
-      while ((long)str & 3);
-    }
-
-  /* Load two constants:
-     R4 = 0xfefefeff [ == ~(0x80808080 << 1) ]
-     R5 = 0x80808080  */
-
-  asm ("mov	r5, #0x80\n\
-	add	r5, r5, #0x8000\n\
-	add	r5, r5, r5, lsl #16\n\
-	mvn	r4, r5, lsl #1\n\
-"
-
-#if defined __ARM_ARCH_5__ || defined __ARM_ARCH_5T__ || defined __ARM_ARCH_5E__ || defined __ARM_ARCH_5TE__
-
-"	tst	%0, #0x7\n\
-	ldreqd	r6, [%0]\n\
-	beq	1f\n\
-	ldr	r2, [%0]\n\
-        add     r3, r2, r4\n\
-        bic     r3, r3, r2\n\
-        ands    r2, r3, r5\n\
-	bne	2f\n\
-	sub	%0, %0, #4\n\
-\n\
-0:\n\
-	ldrd	r6, [%0, #8]!\n\
-"
-	PRELOADSTR ("%0")
-"\n\
-1:\n\
-	add	r3, r6, r4\n\
-	add	r2, r7, r4\n\
-	bic	r3, r3, r6\n\
-	bic	r2, r2, r7\n\
-	and	r3, r3, r5\n\
-	and	r2, r2, r5\n\
-	orrs	r3, r2, r3\n\
-	beq	0b\n\
-"
-#else
-
-"	sub	%0, %0, #4\n\
-\n\
-0:\n\
-	ldr	r6, [%0, #4]!\n\
-"
-	PRELOADSTR ("%0")
-"\n\
-	add	r3, r6, r4\n\
-	bic	r3, r3, r6\n\
-	ands	r3, r3, r5\n\
-	beq	0b\n\
-"
-#endif /* __ARM_ARCH_5[T][E]__ */
-"\n\
-2:\n\
-	ldrb	r3, [%0]\n\
-	cmp	r3, #0x0\n\
-	beq	1f\n\
-\n\
-0:\n\
-	ldrb	r3, [%0, #1]!\n\
-"
-	PRELOADSTR ("%0")
-"\n\
-	cmp	r3, #0x0\n\
-	bne	0b\n\
-1:\n\
-"
-       : "=r" (str) : "0" (str) : "r2", "r3", "r4", "r5", "r6", "r7");
-
-  out:
-  return str - start;
-}
-
-#endif
diff --git a/newlib/libc/machine/xscale/xscale.h b/newlib/libc/machine/xscale/xscale.h
deleted file mode 100644
index c127e6653..000000000
--- a/newlib/libc/machine/xscale/xscale.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __XSCALE_MACH_H__
-#define __XSCALE_MACH_H__
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a##b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1(__USER_LABEL_PREFIX__, x)
-
-#ifdef __XSCALE__
-#define PRELOAD(X) pld	[X]
-#define PRELOADSTR(X) "	pld	[" X "]"
-#else
-#define PRELOAD(X)
-#define PRELOADSTR(X) ""
-#endif /* __XSCALE__ */
-
-#endif /* !__XSCALE_MACH_H__ */
diff --git a/newlib/libc/machine/xstormy16/Makefile.am b/newlib/libc/machine/xstormy16/Makefile.am
deleted file mode 100644
index fe4e6ab40..000000000
--- a/newlib/libc/machine/xstormy16/Makefile.am
+++ /dev/null
@@ -1,69 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-# hack: putting $(newlib_basedir)/libm/common into INCLUDES forces automake
-# to output a definition for newlib_basedir.
-INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-lib_a_LIBADD = malloc.o free.o realloc.o calloc.o cfree.o malign.o \
-	valloc.o pvalloc.o mallinfo.o mallstats.o msize.o mallopt.o \
-	mallocr.o freer.o reallocr.o callocr.o
-
-MALLOC_COMPILE = $(COMPILE)
-
-malloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-free.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/tiny-malloc.c -o $@
-
-realloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-calloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-cfree.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_CFREE -c $(srcdir)/tiny-malloc.c -o $@
-
-malign.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MEMALIGN -c $(srcdir)/tiny-malloc.c -o $@
-
-valloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_VALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-pvalloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_PVALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-mallinfo.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLINFO -c $(srcdir)/tiny-malloc.c -o $@
-
-mallstats.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_STATS -c $(srcdir)/tiny-malloc.c -o $@
-
-msize.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_USABLE_SIZE -c $(srcdir)/tiny-malloc.c -o $@
-
-mallopt.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOPT -c $(srcdir)/mallocr.c -o $@
-
-mallocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/mallocr.c -o $@
-
-freer.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/mallocr.c -o $@
-
-reallocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/mallocr.c -o $@
-
-callocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/mallocr.c -o $@
-
diff --git a/newlib/libc/machine/xstormy16/Makefile.in b/newlib/libc/machine/xstormy16/Makefile.in
deleted file mode 100644
index 37c2cacda..000000000
--- a/newlib/libc/machine/xstormy16/Makefile.in
+++ /dev/null
@@ -1,386 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-# hack: putting $(newlib_basedir)/libm/common into INCLUDES forces automake
-# to output a definition for newlib_basedir.
-INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-lib_a_LIBADD = malloc.o free.o realloc.o calloc.o cfree.o malign.o \
-	valloc.o pvalloc.o mallinfo.o mallstats.o msize.o mallopt.o \
-	mallocr.o freer.o reallocr.o callocr.o
-
-
-MALLOC_COMPILE = $(COMPILE)
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_DEPENDENCIES =  malloc.o free.o realloc.o calloc.o cfree.o \
-malign.o valloc.o pvalloc.o mallinfo.o mallstats.o msize.o mallopt.o \
-mallocr.o freer.o reallocr.o callocr.o
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-malloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-free.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/tiny-malloc.c -o $@
-
-realloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-calloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-cfree.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_CFREE -c $(srcdir)/tiny-malloc.c -o $@
-
-malign.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MEMALIGN -c $(srcdir)/tiny-malloc.c -o $@
-
-valloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_VALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-pvalloc.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_PVALLOC -c $(srcdir)/tiny-malloc.c -o $@
-
-mallinfo.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLINFO -c $(srcdir)/tiny-malloc.c -o $@
-
-mallstats.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_STATS -c $(srcdir)/tiny-malloc.c -o $@
-
-msize.o: tiny-malloc.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_USABLE_SIZE -c $(srcdir)/tiny-malloc.c -o $@
-
-mallopt.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOPT -c $(srcdir)/mallocr.c -o $@
-
-mallocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/mallocr.c -o $@
-
-freer.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/mallocr.c -o $@
-
-reallocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/mallocr.c -o $@
-
-callocr.o: mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/mallocr.c -o $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/xstormy16/aclocal.m4 b/newlib/libc/machine/xstormy16/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/xstormy16/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/xstormy16/configure b/newlib/libc/machine/xstormy16/configure
deleted file mode 100755
index 6ff88da2a..000000000
--- a/newlib/libc/machine/xstormy16/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=setjmp.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/xstormy16/configure.in b/newlib/libc/machine/xstormy16/configure.in
deleted file mode 100644
index 3bb438650..000000000
--- a/newlib/libc/machine/xstormy16/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/calmrisc16 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(setjmp.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/xstormy16/mallocr.c b/newlib/libc/machine/xstormy16/mallocr.c
deleted file mode 100644
index 23e02f74c..000000000
--- a/newlib/libc/machine/xstormy16/mallocr.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <malloc.h>
-
-#ifdef DEFINE_MALLOC
-_PTR 
-_malloc_r (struct _reent *r, size_t sz)
-{
-  return malloc (sz);
-}
-#endif
-
-#ifdef DEFINE_CALLOC
-_PTR 
-_calloc_r (struct _reent *r, size_t a, size_t b)
-{
-  return calloc (a, b);
-}
-#endif
-
-#ifdef DEFINE_FREE
-void
-_free_r (struct _reent *r, _PTR x)
-{
-  free (x);
-}
-#endif
-
-#ifdef DEFINE_REALLOC
-_PTR 
-_realloc_r (struct _reent *r, _PTR x, size_t sz)
-{
-  return realloc (x, sz);
-}
-#endif
diff --git a/newlib/libc/machine/xstormy16/setjmp.S b/newlib/libc/machine/xstormy16/setjmp.S
deleted file mode 100644
index f2f7210cd..000000000
--- a/newlib/libc/machine/xstormy16/setjmp.S
+++ /dev/null
@@ -1,57 +0,0 @@
-;;  xstormy16
-;;   Copyright (C) 2001 by  Red Hat, Incorporated. All rights reserved.
-;; 
-;; Permission to use, copy, modify, and distribute this software
-;; is freely granted, provided that this notice is preserved.
-;; 
-	.file "setjmp.S"
-
-	.section .text
-	.align 1
-	.global setjmp
-	.type setjmp,@function
-setjmp:
-	mov r0,r10
-	mov (r2++),r0
-	mov r0,r11
-	mov (r2++),r0
-	mov r0,r12
-	mov (r2++),r0
-	mov r0,r13
-	mov (r2++),r0
-	pop r0			; PC high word
-	pop r1			; PC low word
-	mov (r2++), r0
-	mov (r2++), r1
-	mov r3,sp
-	mov (r2++),r3
-	mov.w r2,#0
-	mov r8, r0
-	mov r9, r1
-	jmp r8, r9
-	.size setjmp,.-setjmp
-
-	.global longjmp
-	.type longjmp,@function
-longjmp:
-	mov r0,(r2++)
-	mov r10,r0
-	mov r0,(r2++)
-	mov r11,r0
-	mov r0,(r2++)
-	mov r12,r0
-	mov r0,(r2++)
-	mov r13,r0
-	mov r0,(r2++)
-	mov r8, r0
-	mov r1,(r2++)
-	mov r9, r1
-	mov r4,(r2++)
-	mov sp,r4
-;; status arg (r3) to longjmp is return value
-;; if it's zero, return 1
-	bnz r3, #0, 0f
-	mov.w r3,#1
-0:	mov r2, r3
-	jmp r8,r9
-	.size longjmp,.-longjmp
diff --git a/newlib/libc/machine/xstormy16/tiny-malloc.c b/newlib/libc/machine/xstormy16/tiny-malloc.c
deleted file mode 100644
index 597e389dc..000000000
--- a/newlib/libc/machine/xstormy16/tiny-malloc.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/* A replacement malloc with:
-   - Much reduced code size;
-   - Smaller RAM footprint;
-   - The ability to handle downward-growing heaps;
-   but
-   - Slower;
-   - Probably higher memory fragmentation;
-   - Doesn't support threads (but, if it did support threads,
-     it wouldn't need a global lock, only a compare-and-swap instruction);
-   - Assumes the maximum alignment required is the alignment of a pointer;
-   - Assumes that memory is already there and doesn't need to be allocated.
-
-* Synopsis of public routines
-
-  malloc(size_t n);
-     Return a pointer to a newly allocated chunk of at least n bytes, or null
-     if no space is available.
-  free(void* p);
-     Release the chunk of memory pointed to by p, or no effect if p is null.
-  realloc(void* p, size_t n);
-     Return a pointer to a chunk of size n that contains the same data
-     as does chunk p up to the minimum of (n, p's size) bytes, or null
-     if no space is available. The returned pointer may or may not be
-     the same as p. If p is null, equivalent to malloc.  Unless the
-     #define REALLOC_ZERO_BYTES_FREES below is set, realloc with a
-     size argument of zero (re)allocates a minimum-sized chunk.
-  memalign(size_t alignment, size_t n);
-     Return a pointer to a newly allocated chunk of n bytes, aligned
-     in accord with the alignment argument, which must be a power of
-     two.  Will fail if 'alignment' is too large.
-  calloc(size_t unit, size_t quantity);
-     Returns a pointer to quantity * unit bytes, with all locations
-     set to zero.
-  cfree(void* p);
-     Equivalent to free(p).
-  malloc_trim(size_t pad);
-     Release all but pad bytes of freed top-most memory back 
-     to the system. Return 1 if successful, else 0.
-  malloc_usable_size(void* p);
-     Report the number usable allocated bytes associated with allocated
-     chunk p. This may or may not report more bytes than were requested,
-     due to alignment and minimum size constraints.
-  malloc_stats();
-     Prints brief summary statistics on stderr.
-  mallinfo()
-     Returns (by copy) a struct containing various summary statistics.
-  mallopt(int parameter_number, int parameter_value)
-     Changes one of the tunable parameters described below. Returns
-     1 if successful in changing the parameter, else 0.  Actually, returns 0
-     always, as no parameter can be changed.
-*/
-
-#ifdef __xstormy16__
-#define MALLOC_DIRECTION -1
-#endif
-
-#ifndef MALLOC_DIRECTION
-#define MALLOC_DIRECTION 1
-#endif
-
-#include <stddef.h>
-
-void* malloc(size_t);
-void    free(void*);
-void* realloc(void*, size_t);
-void* memalign(size_t, size_t);
-void* valloc(size_t);
-void* pvalloc(size_t);
-void* calloc(size_t, size_t);
-void    cfree(void*);
-int     malloc_trim(size_t);
-size_t  malloc_usable_size(void*);
-void    malloc_stats(void);
-int     mallopt(int, int);
-struct mallinfo mallinfo(void);
-
-typedef struct freelist_entry {
-  size_t size;
-  struct freelist_entry *next;
-} *fle;
-
-extern void * __malloc_end;
-extern fle __malloc_freelist;
-
-/* Return the number of bytes that need to be added to X to make it
-   aligned to an ALIGN boundary.  ALIGN must be a power of 2.  */
-#define M_ALIGN(x, align) (-(size_t)(x) & ((align) - 1))
-
-/* Return the number of bytes that need to be subtracted from X to make it
-   aligned to an ALIGN boundary.  ALIGN must be a power of 2.  */
-#define M_ALIGN_SUB(x, align) ((size_t)(x) & ((align) - 1))
-
-extern void __malloc_start;
-
-/* This is the minimum gap allowed between __malloc_end and the top of
-   the stack.  This is only checked for when __malloc_end is
-   decreased; if instead the stack grows into the heap, silent data
-   corruption will result.  */
-#define MALLOC_MINIMUM_GAP 32
-
-#ifdef __xstormy16__
-register void * stack_pointer asm ("r15");
-#define MALLOC_LIMIT stack_pointer
-#else
-#define MALLOC_LIMIT __builtin_frame_address (0)
-#endif
-
-#if MALLOC_DIRECTION < 0
-#define CAN_ALLOC_P(required)				\
-  (((size_t) __malloc_end - (size_t)MALLOC_LIMIT	\
-    - MALLOC_MINIMUM_GAP) >= (required))
-#else
-#define CAN_ALLOC_P(required)				\
-  (((size_t)MALLOC_LIMIT - (size_t) __malloc_end	\
-    - MALLOC_MINIMUM_GAP) >= (required))
-#endif
-
-/* real_size is the size we actually have to allocate, allowing for
-   overhead and alignment.  */
-#define REAL_SIZE(sz)						\
-  ((sz) < sizeof (struct freelist_entry) - sizeof (size_t)	\
-   ? sizeof (struct freelist_entry)				\
-   : sz + sizeof (size_t) + M_ALIGN(sz, sizeof (size_t)))
-
-#ifdef DEFINE_MALLOC
-
-void * __malloc_end = &__malloc_start;
-fle __malloc_freelist;
-
-void *
-malloc (size_t sz)
-{
-  fle *nextfree;
-  fle block;
-
-  /* real_size is the size we actually have to allocate, allowing for
-     overhead and alignment.  */
-  size_t real_size = REAL_SIZE (sz);
-
-  /* Look for the first block on the freelist that is large enough.  */
-  for (nextfree = &__malloc_freelist; 
-       *nextfree; 
-       nextfree = &(*nextfree)->next)  
-    {
-      block = *nextfree;
-      
-      if (block->size >= real_size)
-	{
-	  /* If the block found is just the right size, remove it from
-	     the free list.  Otherwise, split it.  */
-	  if (block->size < real_size + sizeof (struct freelist_entry))
-	    {
-	      *nextfree = block->next;
-	      return (void *)&block->next;
-	    }
-	  else
-	    {
-	      size_t newsize = block->size - real_size;
-	      fle newnext = block->next;
-	      *nextfree = (fle)((size_t)block + real_size);
-	      (*nextfree)->size = newsize;
-	      (*nextfree)->next = newnext;
-	      goto done;
-	    }
-	}
-
-      /* If this is the last block on the freelist, and it was too small,
-	 enlarge it.  */
-      if (! block->next
-	  && __malloc_end == (void *)((size_t)block + block->size))
-	{
-	  size_t moresize = real_size - block->size;
-	  if (! CAN_ALLOC_P (moresize))
-	    return NULL;
-	  
-	  *nextfree = NULL;
-	  if (MALLOC_DIRECTION < 0)
-	    {
-	      block = __malloc_end = (void *)((size_t)block - moresize);
-	    }
-	  else
-	    {
-	      __malloc_end = (void *)((size_t)block + real_size);
-	    }
-
-	  goto done;
-	}
-    }
-
-  /* No free space at the end of the free list.  Allocate new space
-     and use that.  */
-
-  if (! CAN_ALLOC_P (real_size))
-    return NULL;
-
-  if (MALLOC_DIRECTION > 0)
-    {
-      block = __malloc_end;
-      __malloc_end = (void *)((size_t)__malloc_end + real_size);
-    }
-  else
-    {
-      block = __malloc_end = (void *)((size_t)__malloc_end - real_size);
-    }
- done:
-  block->size = real_size;
-  return (void *)&block->next;
-}
-
-#endif
-
-#ifdef DEFINE_FREE
-
-void
-free (void *block_p)
-{
-  fle *nextfree;
-  fle block = (fle)((size_t) block_p - offsetof (struct freelist_entry, next));
-
-  if (block_p == NULL)
-    return;
-  
-  /* Look on the freelist to see if there's a free block just before
-     or just after this block.  */
-  for (nextfree = &__malloc_freelist; 
-       *nextfree; 
-       nextfree = &(*nextfree)->next)
-    {
-      fle thisblock = *nextfree;
-      if ((size_t)thisblock + thisblock->size == (size_t) block)
-	{
-	  thisblock->size += block->size;
-	  if (MALLOC_DIRECTION > 0
-	      && thisblock->next
-	      && (size_t) block + block->size == (size_t) thisblock->next)
-	    {
-	      thisblock->size += thisblock->next->size;
-	      thisblock->next = thisblock->next->next;
-	    }
-	  return;
-	}
-      else if ((size_t) thisblock == (size_t) block + block->size)
-	{
-	  if (MALLOC_DIRECTION < 0
-	      && thisblock->next
-	      && (size_t) block == ((size_t) thisblock->next 
-				    + thisblock->next->size))
-	    {
-	      *nextfree = thisblock->next;
-	      thisblock->next->size += block->size + thisblock->size;
-	    }
-	  else
-	    {
-	      block->size += thisblock->size;
-	      block->next = thisblock->next;
-	      *nextfree = block;
-	    }
-	  return;
-	}
-      else if ((MALLOC_DIRECTION > 0
-		&& (size_t) thisblock > (size_t) block)
-	       || (MALLOC_DIRECTION < 0
-		   && (size_t) thisblock < (size_t) block))
-	break;
-    }
-
-  block->next = *nextfree;
-  *nextfree = block;
-  return;
-}
-#endif
-
-#ifdef DEFINE_REALLOC
-void *
-realloc (void *block_p, size_t sz)
-{
-  fle block = (fle)((size_t) block_p - offsetof (struct freelist_entry, next));
-  size_t real_size = REAL_SIZE (sz);
-  size_t old_real_size;
-
-  if (block_p == NULL)
-    return malloc (sz);
-
-  old_real_size = block->size;
-
-  /* Perhaps we need to allocate more space.  */
-  if (old_real_size < real_size)
-    {
-      void *result;
-      size_t old_size = old_real_size - sizeof (size_t);
-      
-      /* Need to allocate, copy, and free.  */
-      result = malloc (sz);
-      if (result == NULL)
-	return NULL;
-      memcpy (result, block_p, old_size < sz ? old_size : sz);
-      free (block_p);
-      return result;
-    }
-  /* Perhaps we can free some space.  */
-  if (old_real_size - real_size >= sizeof (struct freelist_entry))
-    {
-      fle newblock = (fle)((size_t)block + real_size);
-      block->size = real_size;
-      newblock->size = old_real_size - real_size;
-      free (&newblock->next);
-    }
-  return block_p;
-}
-#endif
-
-#ifdef DEFINE_CALLOC
-void *
-calloc (size_t n, size_t elem_size)
-{
-  void *result;
-  size_t sz = n * elem_size;
-  result = malloc (sz);
-  if (result != NULL)
-    memset (result, 0, sz);
-  return result;
-}
-#endif
-
-#ifdef DEFINE_CFREE
-void
-cfree (void *p)
-{
-  free (p);
-}
-#endif
-
-#ifdef DEFINE_MEMALIGN
-void *
-memalign (size_t align, size_t sz)
-{
-  fle *nextfree;
-  fle block;
-
-  /* real_size is the size we actually have to allocate, allowing for
-     overhead and alignment.  */
-  size_t real_size = REAL_SIZE (sz);
-
-  /* Some sanity checking on 'align'. */
-  if ((align & (align - 1)) != 0
-      || align <= 0)
-    return NULL;
-
-  /* Look for the first block on the freelist that is large enough.  */
-  /* One tricky part is this: We want the result to be a valid pointer
-     to free.  That means that there has to be room for a size_t
-     before the block.  If there's additional space before the block,
-     it should go on the freelist, or it'll be lost---we could add it
-     to the size of the block before it in memory, but finding the
-     previous block is expensive.  */
-  for (nextfree = &__malloc_freelist; 
-       ; 
-       nextfree = &(*nextfree)->next)  
-    {
-      size_t before_size;
-      size_t old_size;
-
-      /* If we've run out of free blocks, allocate more space.  */
-      if (! *nextfree)
-	{
-	  old_size = real_size;
-	  if (MALLOC_DIRECTION < 0)
-	    {
-	      old_size += M_ALIGN_SUB (((size_t)__malloc_end 
-					- old_size + sizeof (size_t)),
-				       align);
-	      if (! CAN_ALLOC_P (old_size))
-		return NULL;
-	      block = __malloc_end = (void *)((size_t)__malloc_end - old_size);
-	    }
-	  else
-	    {
-	      block = __malloc_end;
-	      old_size += M_ALIGN ((size_t)__malloc_end + sizeof (size_t),
-				   align);
-	      if (! CAN_ALLOC_P (old_size))
-		return NULL;
-	      __malloc_end = (void *)((size_t)__malloc_end + old_size);
-	    }
-	  *nextfree = block;
-	  block->size = old_size;
-	  block->next = NULL;
-	}
-      else
-	{
-	  block = *nextfree;
-	  old_size = block->size;
-	}
-      
-
-      before_size = M_ALIGN (&block->next, align);
-      if (before_size != 0)
-	before_size = sizeof (*block) + M_ALIGN (&(block+1)->next, align);
-
-      /* If this is the last block on the freelist, and it is too small,
-	 enlarge it.  */
-      if (! block->next
-	  && old_size < real_size + before_size
-	  && __malloc_end == (void *)((size_t)block + block->size))
-	{
-	  if (MALLOC_DIRECTION < 0)
-	    {
-	      size_t moresize = real_size - block->size;
-	      moresize += M_ALIGN_SUB ((size_t)&block->next - moresize, align);
-	      if (! CAN_ALLOC_P (moresize))
-		return NULL;
-	      block = __malloc_end = (void *)((size_t)block - moresize);
-	      block->next = NULL;
-	      block->size = old_size = old_size + moresize;
-	      before_size = 0;
-	    }
-	  else
-	    {
-	      if (! CAN_ALLOC_P (before_size + real_size - block->size))
-		return NULL;
-	      __malloc_end = (void *)((size_t)block + before_size + real_size);
-	      block->size = old_size = before_size + real_size;
-	    }
-
-	  /* Two out of the four cases below will now be possible; which
-	     two depends on MALLOC_DIRECTION.  */
-	}
-
-      if (old_size >= real_size + before_size)
-	{
-	  /* This block will do.  If there needs to be space before it, 
-	     split the block.  */
-	  if (before_size != 0)
-	    {
-	      fle old_block = block;
-
-	      old_block->size = before_size;
-	      block = (fle)((size_t)block + before_size);
-	      
-	      /* If there's no space after the block, we're now nearly
-                 done; just make a note of the size required.  
-	         Otherwise, we need to create a new free space block.  */
-	      if (old_size - before_size 
-		  <= real_size + sizeof (struct freelist_entry))
-		{
-		  block->size = old_size - before_size;
-		  return (void *)&block->next;
-		}
-	      else 
-		{
-		  fle new_block;
-		  new_block = (fle)((size_t)block + real_size);
-		  new_block->size = old_size - before_size - real_size;
-		  if (MALLOC_DIRECTION > 0)
-		    {
-		      new_block->next = old_block->next;
-		      old_block->next = new_block;
-		    }
-		  else
-		    {
-		      new_block->next = old_block;
-		      *nextfree = new_block;
-		    }
-		  goto done;
-		}
-	    }
-	  else
-	    {
-	      /* If the block found is just the right size, remove it from
-		 the free list.  Otherwise, split it.  */
-	      if (old_size <= real_size + sizeof (struct freelist_entry))
-		{
-		  *nextfree = block->next;
-		  return (void *)&block->next;
-		}
-	      else
-		{
-		  size_t newsize = old_size - real_size;
-		  fle newnext = block->next;
-		  *nextfree = (fle)((size_t)block + real_size);
-		  (*nextfree)->size = newsize;
-		  (*nextfree)->next = newnext;
-		  goto done;
-		}
-	    }
-	}
-    }
-
- done:
-  block->size = real_size;
-  return (void *)&block->next;
-}
-#endif
-
-#ifdef DEFINE_VALLOC
-void *
-valloc (size_t sz)
-{
-  return memalign (128, sz);
-}
-#endif
-#ifdef DEFINE_PVALLOC
-void *
-pvalloc (size_t sz)
-{
-  return memalign (128, sz + M_ALIGN (sz, 128));
-}
-#endif
-
-#ifdef DEFINE_MALLINFO
-#include "malloc.h"
-
-struct mallinfo 
-mallinfo (void)
-{
-  struct mallinfo r;
-  fle fr;
-  size_t free_size;
-  size_t total_size;
-  size_t free_blocks;
-
-  memset (&r, 0, sizeof (r));
-
-  free_size = 0;
-  free_blocks = 0;
-  for (fr = __malloc_freelist; fr; fr = fr->next)
-    {
-      free_size += fr->size;
-      free_blocks++;
-      if (! fr->next)
-	{
-	  int atend;
-	  if (MALLOC_DIRECTION > 0)
-	    atend = (void *)((size_t)fr + fr->size) == __malloc_end;
-	  else
-	    atend = (void *)fr == __malloc_end;
-	  if (atend)
-	    r.keepcost = fr->size;
-	}
-    }
-
-  if (MALLOC_DIRECTION > 0)
-    total_size = (char *)__malloc_end - (char *)&__malloc_start;
-  else
-    total_size = (char *)&__malloc_start - (char *)__malloc_end;
-  
-#ifdef DEBUG
-  /* Fixme: should walk through all the in-use blocks and see if
-     they're valid.  */
-#endif
-
-  r.arena = total_size;
-  r.fordblks = free_size;
-  r.uordblks = total_size - free_size;
-  r.ordblks = free_blocks;
-  return r;
-}
-#endif
-
-#ifdef DEFINE_MALLOC_STATS
-#include "malloc.h"
-#include <stdio.h>
-
-void 
-malloc_stats(void)
-{
-  struct mallinfo i;
-  FILE *fp;
-  
-  fp = stderr;
-  i = mallinfo();
-  fprintf (fp, "malloc has reserved %u bytes between %p and %p\n",
-	   i.arena, &__malloc_start, __malloc_end);
-  fprintf (fp, "there are %u bytes free in %u chunks\n",
-	   i.fordblks, i.ordblks);
-  fprintf (fp, "of which %u bytes are at the end of the reserved space\n",
-	   i.keepcost);
-  fprintf (fp, "and %u bytes are in use.\n", i.uordblks);
-}
-#endif
-
-#ifdef DEFINE_MALLOC_USABLE_SIZE
-size_t 
-malloc_usable_size (void *block_p)
-{
-  fle block = (fle)((size_t) block_p - offsetof (struct freelist_entry, next));
-  return block->size - sizeof (size_t);
-}
-#endif
-
-#ifdef DEFINE_MALLOPT
-int
-mallopt (int n, int v)
-{
-  (void)n; (void)v;
-  return 0;
-}
-#endif
diff --git a/newlib/libc/machine/z8k/Makefile.am b/newlib/libc/machine/z8k/Makefile.am
deleted file mode 100644
index 1c65b9ffe..000000000
--- a/newlib/libc/machine/z8k/Makefile.am
+++ /dev/null
@@ -1,12 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/z8k/Makefile.in b/newlib/libc/machine/z8k/Makefile.in
deleted file mode 100644
index b794ff2bb..000000000
--- a/newlib/libc/machine/z8k/Makefile.in
+++ /dev/null
@@ -1,327 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = setjmp.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/machine/z8k/aclocal.m4 b/newlib/libc/machine/z8k/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/machine/z8k/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/machine/z8k/args.h b/newlib/libc/machine/z8k/args.h
deleted file mode 100644
index 3f6062483..000000000
--- a/newlib/libc/machine/z8k/args.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifdef __Z8001__
-
-segm
-#define PARG_0 rr6
-#else
-unsegm
-#define PARG_0 r7
-#endif
-
-#define LARG_0 rr6
-#define ARG_0 r7
-
-#define LARG_1 rr4
diff --git a/newlib/libc/machine/z8k/configure b/newlib/libc/machine/z8k/configure
deleted file mode 100755
index de0fb3759..000000000
--- a/newlib/libc/machine/z8k/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=args.h
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/machine/z8k/configure.in b/newlib/libc/machine/z8k/configure.in
deleted file mode 100644
index d8c24dc8a..000000000
--- a/newlib/libc/machine/z8k/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/machine/z8k configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(args.h)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/z8k/setjmp.S b/newlib/libc/machine/z8k/setjmp.S
deleted file mode 100644
index e58d0d1f4..000000000
--- a/newlib/libc/machine/z8k/setjmp.S
+++ /dev/null
@@ -1,82 +0,0 @@
-
-#ifdef __Z8001__
-	segm
-
-	.global	_setjmp
-	.globl	_longjmp
-
-#ifdef __STD_CALL__
-
-_setjmp:
-	ldl	rr6,rr14(#4)	! get argument
-	ldl	rr2,@rr14	! fetch pc
-	ldl	@rr6,rr2	! save it
-	ldl	rr6(#16),rr8
-	ldl	rr6(#4),rr10
-	ldl	rr6(#8),rr12	! remember frame pointer
-	ldl	rr6(#12),rr14	! remember stack pointer
-	ldk	r7,#0
-	ret	t
-
-_longjmp:
-	ldl	rr4,rr14(#4)	! get first argument
-	ld	r7,rr14(#8)	! get return value
-	ldl	rr8,rr4(#16)
-	ldl	rr10,rr4(#4)
-	ldl	rr12,rr4(#8)	! restore old frame pointer
-	ldl	rr14,rr4(#12)	! restore old stack pointer
-	ldl	rr4,@rr4	! return address
-	inc	r15,#4
-	jp	@rr4
-
-#else /* above __STD_CALL_, below not */
-
-_setjmp:
-	ldl	rr2,@rr14	! fetch pc
-	ldl	@rr6,rr2	! save it
-	ldl	rr6(16),rr8
-	ldl	rr6(4),rr10
-	ldl	rr6(8),rr12	! and the other special regs
-	ldl	rr6(12),rr14
-	ldk	r2,#0
-	ret	t
-
-_longjmp:
-	ld	r2,r5		! get return value
-	ldl	rr4,rr6(0)
-	ldl	rr8,rr6(16)
-	ldl	rr10,rr6(4)
-	ldl	rr12,rr6(8)
-	ldl	rr14,rr6(12)
-	inc	r15,#4
-	jp	@rr4
-
-#endif  /* not __STD_CALL__ */
-#else /* above Z8001, below Z8002 */
-	unseg
-
-#ifdef __STD_CALL__
-#warning Z8002 std call not implemented!
-#endif
-
-	.global	_setjmp
-_setjmp:
-	ld	r2,@r15	! fetch pc
-	ld	@r7,r2	! save it
-	ldl	r7(4),rr10
-	ldl	r7(8),rr12	! and the other special regs
-	ldl	r7(12),rr14
-	ldk	r2,#0
-	ret	t
-	
-	.globl	_longjmp
-
-_longjmp:
-	ld	r2,r6		! get return value
-	ld	r4,@r7
-	ldl	rr10,rr7(4)
-	ldl	rr12,rr7(8)
-	ldl	rr14,rr7(12)
-	jp	@rr4
-	
-#endif  /* Z8002 version */
diff --git a/newlib/libc/misc/Makefile.am b/newlib/libc/misc/Makefile.am
deleted file mode 100644
index e5ed00b17..000000000
--- a/newlib/libc/misc/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = dprintf.c unctrl.c ffs.c
-
-libmisc_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libmisc.la
-libmisc_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA = 
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES = unctrl.def ffs.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/misc.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/misc/Makefile.in b/newlib/libc/misc/Makefile.in
deleted file mode 100644
index 6c66bbbc9..000000000
--- a/newlib/libc/misc/Makefile.in
+++ /dev/null
@@ -1,388 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = dprintf.c unctrl.c ffs.c
-
-libmisc_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libmisc.la
-@USE_LIBTOOL_TRUE@libmisc_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-CHEWOUT_FILES = unctrl.def ffs.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  dprintf.$(OBJEXT) unctrl.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ffs.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libmisc_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libmisc_la_OBJECTS =  dprintf.lo unctrl.lo ffs.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libmisc_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libmisc_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus misc/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libmisc.la: $(libmisc_la_OBJECTS) $(libmisc_la_DEPENDENCIES)
-	$(LINK)  $(libmisc_la_LDFLAGS) $(libmisc_la_OBJECTS) $(libmisc_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = misc
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/misc.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/misc/dprintf.c b/newlib/libc/misc/dprintf.c
deleted file mode 100644
index 0b780f59b..000000000
--- a/newlib/libc/misc/dprintf.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/* Debugging printf, for debugging the library itself.
-
-   We don't assume stdio is working.
-   We do assume _write_r is working.
-*/
-
-#include "ctype.h"
-#include "reent.h"
-#include "string.h"
-#include "unctrl.h"
-
-#ifdef __STDC__
-#include "stdarg.h"
-#else
-#include "varargs.h"
-#endif
-
-#if 0
-static char *parse_number ();
-#endif
-
-static long get_number ();
-static void print_number ();
-static void write_char ();
-static void write_string ();
-
-/* Non-zero for big-endian systems.  */
-static int big_endian_p;
-
-/* For now hardcode 2 (stderr) as the console file descriptor.
-   May wish to let the caller pass in a file descriptor or some such but
-   this is only for debugging purposes anyway.  */
-#define CONSOLE_FD 2
-
-/* Standalone printf routine.
-
-   The format string has been enhanced so that multiple values can be dumped
-   without having to have a %-field for each one (say if you want to dump
-   20 words at a certain address).  A modifier of `N' says the next argument
-   is a count, and the one after that is a pointer.
-
-   Example: __dprintf (stderr, "%Nx\n", 20, p); /-* print 20 ints at `p' *-/
-
-   Supported formats are: c d u x s p.
-
-   All ints are retrieved a byte at a time so alignment issues are not
-   a problem.
-
-   This routine is used in situations where the only debugging capability
-   is console output and was written to aid debugging newlib itself.  We don't
-   use printf ourselves as we may be debugging it.  We do assume _write_r is
-   working.
-*/
-
-void
-#ifdef __STDC__
-__dprintf (char *fmt, ...)
-#else
-__dprintf (fmt, va_alist)
-     char *fmt;
-     va_dcl
-#endif
-{
-  va_list args;
-
-  /* Which endian are we?  */
-  {
-    short tmp = 1;
-    big_endian_p = *(char *) &tmp == 0;
-  }
-
-#ifdef __STDC__
-  va_start (args, fmt);
-#else
-  va_start (args);
-#endif
-
-  while (*fmt)
-    {
-      char c, *p;
-      int count;
-      long l;
-
-      if (*fmt != '%' || *++fmt == '%')
-	{
-	  write_char (*fmt++);
-	  continue;
-	}
-
-      if (*fmt == 'N')
-	{
-	  count = va_arg (args, int);
-	  p = va_arg (args, char *);
-	  ++fmt;
-	  c = *fmt++;
-
-	  while (--count >= 0)
-	    {
-	      switch (c)
-		{
-		case 'c' :
-		  write_string (unctrl (*p++));
-		  break;
-		case 'p' :
-		  print_number (16, 1, get_number (p, sizeof (char *), 1));
-		  p += sizeof (char *);
-		  break;
-		case 'd' :
-		case 'u' :
-		case 'x' :
-		  print_number (c == 'x' ? 16 : 10, c != 'd',
-				get_number (p, sizeof (int), c != 'd'));
-		  p += sizeof (int);
-		  break;
-		case 's' :
-		  write_string (*(char **) p);
-		  p += sizeof (char *);
-		  break;
-		}
-	      if (count > 0)
-		write_char (' ');
-	    }
-	}
-      else
-	{
-	  switch (c = *fmt++)
-	    {
-	    case 'c' :
-	      c = va_arg (args, int);
-	      write_string (unctrl (c));
-	      break;
-	    case 'p' :
-	      l = (_POINTER_INT) va_arg (args, char *);
-	      print_number (16, 1, l);
-	      break;
-	    case 'd' :
-	    case 'u' :
-	    case 'x' :
-	      l = va_arg (args, int);
-	      print_number (c == 'x' ? 16 : 10, c != 'd', l);
-	      break;
-	    case 's' :
-	      p = va_arg (args, char *);
-	      write_string (p);
-	      break;
-	    }
-	}
-    }
-
-  va_end (args);
-}
-
-#if 0
-/* Parse a positive decimal integer at S.
-   FIXME: Was used in earlier version, but not currently used.
-   Keep for now.  */
-
-static char *
-parse_number (s, p)
-     char *s;
-     long *p;
-{
-  long x = 0;
-
-  while (isdigit (*s))
-    {
-      x = (x * 10) + (*s - '0');
-      ++s;
-    }
-
-  *p = x;
-  return s;
-}
-#endif
-
-/* Fetch the number at S of SIZE bytes.  */
-
-static long
-get_number (s, size, unsigned_p)
-     char *s;
-     long size;
-     int unsigned_p;
-{
-  long x;
-  unsigned char *p = (unsigned char *) s;
-
-  switch (size)
-    {
-    case 1 :
-      x = *p;
-      if (!unsigned_p)
-	x = (x ^ 0x80) - 0x80;
-      return x;
-    case 2 :
-      if (big_endian_p)
-	x = (p[0] << 8) | p[1];
-      else
-	x = (p[1] << 8) | p[0];
-      if (!unsigned_p)
-	x = (x ^ 0x8000) - 0x8000;
-      return x;
-    case 4 :
-      if (big_endian_p)
-	x = ((long)p[0] << 24) | ((long)p[1] << 16) | (p[2] << 8) | p[3];
-      else
-	x = ((long)p[3] << 24) | ((long)p[2] << 16) | (p[1] << 8) | p[0];
-      if (!unsigned_p)
-	x = (x ^ 0x80000000L) - 0x80000000L;
-      return x;
-#if 0 /* FIXME: Is there a standard mechanism for knowing if
-	 long longs exist?  */
-    case 8 :
-#endif
-    default :
-      return 0;
-  }
-}
-
-/* Print X in base BASE.  */
-
-static void
-print_number (base, unsigned_p, n)
-     int base;
-     int unsigned_p;
-     long n;
-{
-  static char chars[16] = "0123456789abcdef";
-  char *p, buf[32];
-  unsigned long x;
-
-  if (!unsigned_p && n < 0)
-    {
-      write_char ('-');
-      x = -n;
-    }
-  else
-    x = n;
-
-  p = buf + sizeof (buf);
-  *--p = '\0';
-  do
-    {
-      *--p = chars[x % base];
-      x /= base;
-    }
-  while (x != 0);
-
-  write_string (p);
-}
-
-/* Write C to the console.
-   We go through the file descriptor directly because we can't assume
-   stdio is working.  */
-
-static void
-write_char (c)
-     char c;
-{
-  _write_r (_REENT, CONSOLE_FD, &c, 1);
-}
-
-/* Write S to the console.
-   We go through the file descriptor directly because we can't assume
-   stdio is working.  */
-
-static void
-write_string (s)
-     char *s;
-{
-  _write_r (_REENT, CONSOLE_FD, s, strlen (s));
-}
diff --git a/newlib/libc/misc/ffs.c b/newlib/libc/misc/ffs.c
deleted file mode 100644
index 292ffabee..000000000
--- a/newlib/libc/misc/ffs.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-	<<ffs>>---find first bit set in a word
-
-INDEX
-	ffs
-
-ANSI_SYNOPSIS
-	int ffs(int <[word]>);
-
-TRAD_SYNOPSIS
-	int ffs(<[word]>);
-
-DESCRIPTION
-
-<<ffs>> returns the first bit set in a word.
-
-RETURNS
-<<ffs>> returns 0 if <[c]> is 0, 1 if <[c]> is odd, 2 if <[c]> is a multiple of
-2, etc.
-
-PORTABILITY
-<<ffs>> is not ANSI C.
-
-No supporting OS subroutines are required.  */
-
-#include <_ansi.h>
-
-int
-_DEFUN(ffs, (word),
-       int word)
-{
-  int i;
-
-  if (!word)
-    return 0;
-
-  i = 0;
-  for (;;)
-    {
-      if (((1 << i++) & word) != 0)
-	return i;
-    }
-}
diff --git a/newlib/libc/misc/misc.tex b/newlib/libc/misc/misc.tex
deleted file mode 100644
index 22c313eb1..000000000
--- a/newlib/libc/misc/misc.tex
+++ /dev/null
@@ -1,14 +0,0 @@
-@node Misc
-@chapter Miscellaneous Macros and Functions
-This chapter describes miscellaneous routines not covered elsewhere.
-
-@menu 
-* ffs::      Return first bit set in a word
-* unctrl::   Return printable representation of a character
-@end menu
-
-@page
-@include misc/ffs.def
-
-@page
-@include misc/unctrl.def
diff --git a/newlib/libc/misc/unctrl.c b/newlib/libc/misc/unctrl.c
deleted file mode 100644
index 710bf16bd..000000000
--- a/newlib/libc/misc/unctrl.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
-FUNCTION
-	<<unctrl>>---translate characters to upper case
-
-INDEX
-	unctrl
-INDEX
-	unctrllen
-
-ANSI_SYNOPSIS
-	#include <unctrl.h>
-	char *unctrl(int <[c]>);
-	int unctrllen(int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <unctrl.h>
-	char *unctrl(<[c]>);
-	int unctrllen(<[c]>);
-
-DESCRIPTION
-<<unctrl>> is a macro which returns the printable representation of <[c]>
-as a string.
-<<unctrllen>> is a macro which returns the length of the printable
-representation of <[c]>.
-
-RETURNS
-<<unctrl>> returns a string of the printable representation of <[c]>.
-
-<<unctrllen>> returns the length of the string which is the printable
-representation of <[c]>.
-
-PORTABILITY
-<<unctrl>> and <<unctrllen>> are not ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-/*
- * Copyright (c) 1981, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)unctrl.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-
-_CONST char * _CONST __unctrl[256] = {
-	"^@",  "^A",  "^B",  "^C",  "^D",  "^E",  "^F",  "^G",
-	"^H",  "^I",  "^J",  "^K",  "^L",  "^M",  "^N",  "^O",
-	"^P",  "^Q",  "^R",  "^S",  "^T",  "^U",  "^V",  "^W",
-	"^X",  "^Y",  "^Z",  "^[", "^\\",  "^]",  "^~",  "^_",
-	 " ",   "!",  "\"",   "#",   "$",   "%",   "&",   "'",
-	 "(",   ")",   "*",   "+",   ",",   "-",   ".",   "/",
-	 "0",   "1",   "2",   "3",   "4",   "5",   "6",   "7",
-	 "8",   "9",   ":",   ";",   "<",   "=",   ">",   "?",
-	 "@",   "A",   "B",   "C",   "D",   "E",   "F",   "G",
-	 "H",   "I",   "J",   "K",   "L",   "M",   "N",   "O",
-	 "P",   "Q",   "R",   "S",   "T",   "U",   "V",   "W",
-	 "X",   "Y",   "Z",   "[",  "\\",   "]",   "^",   "_",
-	 "`",   "a",   "b",   "c",   "d",   "e",   "f",   "g",
-	 "h",   "i",   "j",   "k",   "l",   "m",   "n",   "o",
-	 "p",   "q",   "r",   "s",   "t",   "u",   "v",   "w",
-	 "x",   "y",   "z",   "{",   "|",   "}",   "~",   "^?",
-
-	"0x80", "0x81",	"0x82", "0x83", "0x84", "0x85", "0x86", "0x87",
-	"0x88", "0x89",	"0x8a", "0x8b", "0x8c", "0x8d", "0x8e", "0x8f",
-	"0x90", "0x91",	"0x92", "0x93", "0x94", "0x95", "0x96", "0x97",
-	"0x98", "0x99",	"0x9a", "0x9b", "0x9c", "0x9d", "0x9e", "0x9f",
-	"0xa0", "0xa1",	"0xa2", "0xa3", "0xa4", "0xa5", "0xa6", "0xa7",
-	"0xa8", "0xa9",	"0xaa", "0xab", "0xac", "0xad", "0xae", "0xaf",
-	"0xb0", "0xb1",	"0xb2", "0xb3", "0xb4", "0xb5", "0xb6", "0xb7",
-	"0xb8", "0xb9",	"0xba", "0xbb", "0xbc", "0xbd", "0xbe", "0xbf",
-	"0xc0", "0xc1",	"0xc2", "0xc3", "0xc4", "0xc5", "0xc6", "0xc7",
-	"0xc8", "0xc9",	"0xca", "0xcb", "0xcc", "0xcd", "0xce", "0xcf",
-	"0xd0", "0xd1",	"0xd2", "0xd3", "0xd4", "0xd5", "0xd6", "0xd7",
-	"0xd8", "0xd9",	"0xda", "0xdb", "0xdc", "0xdd", "0xde", "0xdf",
-	"0xe0", "0xe1",	"0xe2", "0xe3", "0xe4", "0xe5", "0xe6", "0xe7",
-	"0xe8", "0xe9",	"0xea", "0xeb", "0xec", "0xed", "0xee", "0xef",
-	"0xf0", "0xf1",	"0xf2", "0xf3", "0xf4", "0xf5", "0xf6", "0xf7",
-	"0xf8", "0xf9",	"0xfa", "0xfb", "0xfc", "0xfd", "0xfe", "0xff",
-};
-
-_CONST char __unctrllen[256] = {
-	2, 2, 2, 2, 2, 2, 2, 2,
-	2, 2, 2, 2, 2, 2, 2, 2,
-	2, 2, 2, 2, 2, 2, 2, 2,
-	2, 2, 2, 2, 2, 2, 2, 2,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 2, 
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-};
diff --git a/newlib/libc/posix/Makefile.am b/newlib/libc/posix/Makefile.am
deleted file mode 100644
index d39aed316..000000000
--- a/newlib/libc/posix/Makefile.am
+++ /dev/null
@@ -1,69 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	closedir.c creat.c isatty.c \
-	opendir.c readdir.c \
-	readdir_r.c rewinddir.c telldir.c
-
-ELIX_2_OBJS = \
-        scandir.$(oext) seekdir.$(oext)
-
-ELIX_3_OBJS = \
-	execl.$(oext) execle.$(oext) execlp.$(oext) execv.$(oext) \
-	execve.$(oext) execvp.$(oext)
-
-ELIX_4_OBJS = \
-	popen.$(oext) 
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else 
-if ELIX_LEVEL_2
-LIB_OBJS = $(ELIX_2_OBJS)
-else 
-if ELIX_LEVEL_3
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS)
-else
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-endif
-endif
-endif
-
-libposix_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libposix.la
-libposix_la_SOURCES = $(GENERAL_SOURCES)
-libposix_la_LIBADD = $(LIB_OBJS)
-libposix_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared	
-
-CHEWOUT_FILES =
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-# No doc for posix.
-doc:
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/posix/Makefile.in b/newlib/libc/posix/Makefile.in
deleted file mode 100644
index 71430dda5..000000000
--- a/newlib/libc/posix/Makefile.in
+++ /dev/null
@@ -1,415 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	closedir.c creat.c isatty.c \
-	opendir.c readdir.c \
-	readdir_r.c rewinddir.c telldir.c
-
-
-ELIX_2_OBJS = \
-        scandir.$(oext) seekdir.$(oext)
-
-
-ELIX_3_OBJS = \
-	execl.$(oext) execle.$(oext) execlp.$(oext) execv.$(oext) \
-	execve.$(oext) execvp.$(oext)
-
-
-ELIX_4_OBJS = \
-	popen.$(oext) 
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@$(ELIX_2_OBJS) $(ELIX_3_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@$(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-
-libposix_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libposix.la
-@USE_LIBTOOL_TRUE@libposix_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libposix_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libposix_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = 
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  closedir.$(OBJEXT) creat.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@isatty.$(OBJEXT) opendir.$(OBJEXT) readdir.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@readdir_r.$(OBJEXT) rewinddir.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@telldir.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libposix_la_OBJECTS =  closedir.lo creat.lo isatty.lo \
-@USE_LIBTOOL_TRUE@opendir.lo readdir.lo readdir_r.lo rewinddir.lo \
-@USE_LIBTOOL_TRUE@telldir.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libposix_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libposix_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus posix/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libposix.la: $(libposix_la_OBJECTS) $(libposix_la_DEPENDENCIES)
-	$(LINK)  $(libposix_la_LDFLAGS) $(libposix_la_OBJECTS) $(libposix_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = posix
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-# No doc for posix.
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/posix/closedir.c b/newlib/libc/posix/closedir.c
deleted file mode 100644
index 634f5ad12..000000000
--- a/newlib/libc/posix/closedir.c
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)closedir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/lock.h>
-
-extern void _cleanupdir (DIR *dirp);
-
-/*
- * close a directory.
- */
-int
-_DEFUN(closedir, (dirp),
-       register DIR *dirp)
-{
-	int fd, rc;
-
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-#endif
-	rc = 0;
-	fd = dirp->dd_fd;
-	if (fd != -1) {
-		dirp->dd_fd = -1;
-		dirp->dd_loc = 0;
-		(void)free((void *)dirp->dd_buf);
-		(void)free((void *)dirp);
-		rc = close(fd);
-		_cleanupdir(dirp);
-	}
-#ifdef HAVE_DD_LOCK
-	__lock_release_recursive(dirp->dd_lock);
-	__lock_close_recursive(dirp->dd_lock);
-#endif
-	return rc;
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/creat.c b/newlib/libc/posix/creat.c
deleted file mode 100644
index b8a4f9a14..000000000
--- a/newlib/libc/posix/creat.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/* creat() "system call" */
-
-/* This is needed by f2c and therefore the SPEC benchmarks.  */
-
-#include <fcntl.h>
-
-int
-_DEFUN(creat, (path, mode), 
-       const char *path _AND 
-       mode_t mode)
-{
-  return open (path, O_WRONLY | O_CREAT | O_TRUNC, mode);
-}
diff --git a/newlib/libc/posix/execl.c b/newlib/libc/posix/execl.c
deleted file mode 100644
index 6acbe52ed..000000000
--- a/newlib/libc/posix/execl.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* execl.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-#include <_ansi.h>
-#include <unistd.h>
-
-/* Only deal with a pointer to environ, to work around subtle bugs with shared
-   libraries and/or small data systems where the user declares his own
-   'environ'.  */
-static char ***p_environ = &environ;
-
-#ifdef _HAVE_STDC
-
-#include <stdarg.h>
-
-int
-_DEFUN(execl, (path, arg0, ...), 
-      _CONST char *path _AND
-      _CONST char *arg0 _DOTS)
-
-#else
-
-#include <varargs.h>
-
-int
-_DEFUN(execl, (path, arg0, va_alist),
-     _CONST char *path _AND
-     _CONST char *arg0 _AND
-     va_dcl)
-
-#endif
-
-{
-  int i;
-  va_list args;
-  _CONST char *argv[256];
-
-  va_start (args, arg0);
-  argv[0] = arg0;
-  i = 1;
-  do
-      argv[i] = va_arg (args, _CONST char *);
-  while (argv[i++] != NULL);
-  va_end (args);
-
-  return _execve (path, (char * _CONST  *) argv, *p_environ);
-}
diff --git a/newlib/libc/posix/execle.c b/newlib/libc/posix/execle.c
deleted file mode 100644
index efe204d86..000000000
--- a/newlib/libc/posix/execle.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* execle.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-#include <_ansi.h>
-#include <unistd.h>
-
-#ifdef _HAVE_STDC
-
-#include <stdarg.h>
-
-int
-_DEFUN(execle, (path, arg0, ...),
-      _CONST char *path _AND
-      _CONST char *arg0 _DOTS)
-
-#else
-
-#include <varargs.h>
-
-int
-_DEFUN(execle, (path, arg0, va_alist),
-     _CONST char *path _AND
-     _CONST char *arg0 _AND
-     va_dcl)
-
-#endif
-
-{
-  int i;
-  va_list args;
-  _CONST char * _CONST *envp;
-  _CONST char *argv[256];
-
-  va_start (args, arg0);
-  argv[0] = arg0;
-  i = 1;
-  do
-    argv[i] = va_arg (args, _CONST char *);
-  while (argv[i++] != NULL);
-  envp = va_arg (args, _CONST char * _CONST *);
-  va_end (args);
-
-  return _execve (path, (char * _CONST *) argv, (char * _CONST *) envp);
-}
diff --git a/newlib/libc/posix/execlp.c b/newlib/libc/posix/execlp.c
deleted file mode 100644
index 5252cd988..000000000
--- a/newlib/libc/posix/execlp.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* execlp.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-#include <_ansi.h>
-#include <unistd.h>
-
-#ifdef _HAVE_STDC
-
-#include <stdarg.h>
-
-int
-_DEFUN(execlp, (path, arg0, ...),
-      _CONST char *path _AND
-      _CONST char *arg0 _DOTS)
-
-#else
-
-#include <varargs.h>
-
-int
-_DEFUN(execlp, (path, arg0, va_alist),
-     _CONST char *path _AND
-     _CONST char *arg0 _AND
-     va_dcl)
-
-#endif
-
-{
-  int i;
-  va_list args;
-  _CONST char *argv[256];
-
-  va_start (args, arg0);
-  argv[0] = arg0;
-  i = 1;
-  do
-      argv[i] = va_arg (args, _CONST char *);
-  while (argv[i++] != NULL);
-  va_end (args);
-
-  return execvp (path, (char * _CONST *) argv);
-}
diff --git a/newlib/libc/posix/execv.c b/newlib/libc/posix/execv.c
deleted file mode 100644
index 5effb9c57..000000000
--- a/newlib/libc/posix/execv.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* execv.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-#include <_ansi.h>
-#include <unistd.h>
-
-/* Only deal with a pointer to environ, to work around subtle bugs with shared
-   libraries and/or small data systems where the user declares his own
-   'environ'.  */
-static char ***p_environ = &environ;
-
-int
-_DEFUN (execv, (path, argv), 
-	const char *path _AND
-	char * const argv[])
-{
-  return _execve (path, (char * _CONST *) argv, *p_environ);
-}
diff --git a/newlib/libc/posix/execve.c b/newlib/libc/posix/execve.c
deleted file mode 100644
index 8083c03b0..000000000
--- a/newlib/libc/posix/execve.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* execve.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-
-#include <unistd.h>
-
-
-int
-_DEFUN(execve, (path, argv, envp),
-      const char *path _AND
-      char * const argv[] _AND
-      char * const envp[])
-{
-  return _execve (path, argv, envp);
-}
diff --git a/newlib/libc/posix/execvp.c b/newlib/libc/posix/execvp.c
deleted file mode 100644
index 70743163d..000000000
--- a/newlib/libc/posix/execvp.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* execvp.c */
-
-/* This and the other exec*.c files in this directory require 
-   the target to provide the _execve syscall.  */
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-
-#define PATH_DELIM ':'
-
-/*
- * Copy string, until c or <nul> is encountered.
- * NUL-terminate the destination string (s1).
- */
-
-static char *
-_DEFUN (strccpy, (s1, s2, c),
-	char *s1 _AND
-	char *s2 _AND
-	char c)
-{
-  char *dest = s1;
-
-  while (*s2 && *s2 != c)
-    *s1++ = *s2++;
-  *s1 = 0;
-
-  return dest;
-}
-
-int
-_DEFUN (execvp, (file, argv),
-	_CONST char *file _AND
-	char * _CONST argv[])
-{
-  char *path = getenv ("PATH");
-  char buf[MAXNAMLEN];
-
-  /* If $PATH doesn't exist, just pass FILE on unchanged.  */
-  if (!path)
-    return execv (file, argv);
-
-  /* If FILE contains a directory, don't search $PATH.  */
-  if (strchr (file, '/')
-      )
-    return execv (file, argv);
-
-  while (*path)
-    {
-      strccpy (buf, path, PATH_DELIM);
-      /* An empty entry means the current directory.  */
-      if (*buf != 0 && buf[strlen(buf) - 1] != '/')
-	strcat (buf, "/");
-      strcat (buf, file);
-      if (execv (buf, argv) == -1 && errno != ENOENT)
-	return -1;
-      while (*path && *path != PATH_DELIM)
-	path++;
-      if (*path == PATH_DELIM)
-	path++;			/* skip over delim */
-    }
-
-  return -1;
-}
diff --git a/newlib/libc/posix/isatty.c b/newlib/libc/posix/isatty.c
deleted file mode 100644
index 2732ca2a0..000000000
--- a/newlib/libc/posix/isatty.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* isatty.c */
-
-/* Dumb implementation so programs will at least run.  */
-
-#include <sys/stat.h>
-
-int
-_DEFUN(isatty, (fd), int fd)
-{
-  struct stat buf;
-
-  if (fstat (fd, &buf) < 0)
-    return 0;
-  if (S_ISCHR (buf.st_mode))
-    return 1;
-  return 0;
-}
diff --git a/newlib/libc/posix/opendir.c b/newlib/libc/posix/opendir.c
deleted file mode 100644
index c9a97dbf3..000000000
--- a/newlib/libc/posix/opendir.c
+++ /dev/null
@@ -1,95 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)opendir.c	5.11 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/lock.h>
-
-/*
- * open a directory.
- */
-DIR *
-_DEFUN(opendir, (name),
-	const char *name)
-{
-	register DIR *dirp;
-	register int fd;
-	int rc = 0;
-
-	if ((fd = open(name, 0)) == -1)
-		return NULL;
-#ifdef HAVE_FCNTL
-	rc = fcntl(fd, F_SETFD, 1);
-#endif
-	if (rc == -1 ||
-	    (dirp = (DIR *)malloc(sizeof(DIR))) == NULL) {
-		close (fd);
-		return NULL;
-	}
-	/*
-	 * If CLSIZE is an exact multiple of DIRBLKSIZ, use a CLSIZE
-	 * buffer that it cluster boundary aligned.
-	 * Hopefully this can be a big win someday by allowing page trades
-	 * to user space to be done by getdirentries()
-	 */
-	dirp->dd_buf = malloc (512);
-	dirp->dd_len = 512;
-
-	if (dirp->dd_buf == NULL) {
-		close (fd);
-		return NULL;
-	}
-	dirp->dd_fd = fd;
-	dirp->dd_loc = 0;
-	dirp->dd_seek = 0;
-	/*
-	 * Set up seek point for rewinddir.
-	 */
-
-#ifdef HAVE_DD_LOCK
-	/* if we have a locking mechanism, initialize it */
-	__lock_init_recursive(dirp->dd_lock);
-#endif
-
-	return dirp;
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/popen.c b/newlib/libc/posix/popen.c
deleted file mode 100644
index 0f25a3ed0..000000000
--- a/newlib/libc/posix/popen.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*	$NetBSD: popen.c,v 1.11 1995/06/16 07:05:33 jtc Exp $	*/
-
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software written by Ken Arnold and
- * published in UNIX Review, Vol. 6, No. 8.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-#if 0
-static char sccsid[] = "@(#)popen.c	8.1 (Berkeley) 6/4/93";
-#else
-static char rcsid[] = "$NetBSD: popen.c,v 1.11 1995/06/16 07:05:33 jtc Exp $";
-#endif
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-
-#include <signal.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <paths.h>
-
-static struct pid {
-	struct pid *next;
-	FILE *fp;
-	pid_t pid;
-} *pidlist; 
-	
-FILE *
-_DEFUN(popen, (program, type),
-	const char *program _AND
-	const char *type)
-{
-	struct pid *cur;
-	FILE *iop;
-	int pdes[2], pid;
-
-       if ((*type != 'r' && *type != 'w')
-	   || (type[1]
-#ifdef __CYGWIN__
-	       && (type[2] || (type[1] != 'b' && type[1] != 't'))
-#endif
-			       )) {
-		errno = EINVAL;
-		return (NULL);
-	}
-
-	if ((cur = malloc(sizeof(struct pid))) == NULL)
-		return (NULL);
-
-	if (pipe(pdes) < 0) {
-		free(cur);
-		return (NULL);
-	}
-
-	switch (pid = vfork()) {
-	case -1:			/* Error. */
-		(void)close(pdes[0]);
-		(void)close(pdes[1]);
-		free(cur);
-		return (NULL);
-		/* NOTREACHED */
-	case 0:				/* Child. */
-		if (*type == 'r') {
-			if (pdes[1] != STDOUT_FILENO) {
-				(void)dup2(pdes[1], STDOUT_FILENO);
-				(void)close(pdes[1]);
-			}
-			(void) close(pdes[0]);
-		} else {
-			if (pdes[0] != STDIN_FILENO) {
-				(void)dup2(pdes[0], STDIN_FILENO);
-				(void)close(pdes[0]);
-			}
-			(void)close(pdes[1]);
-		}
-		execl(_PATH_BSHELL, "sh", "-c", program, NULL);
-#ifdef __CYGWIN__
-		/* On cygwin32, we may not have /bin/sh.  In that
-                   case, try to find sh on PATH.  */
-		execlp("sh", "sh", "-c", program, NULL);
-#endif
-		_exit(127);
-		/* NOTREACHED */
-	}
-
-	/* Parent; assume fdopen can't fail. */
-	if (*type == 'r') {
-		iop = fdopen(pdes[0], type);
-		(void)close(pdes[1]);
-	} else {
-		iop = fdopen(pdes[1], type);
-		(void)close(pdes[0]);
-	}
-
-	/* Link into list of file descriptors. */
-	cur->fp = iop;
-	cur->pid =  pid;
-	cur->next = pidlist;
-	pidlist = cur;
-
-	return (iop);
-}
-
-/*
- * pclose --
- *	Pclose returns -1 if stream is not associated with a `popened' command,
- *	if already `pclosed', or waitpid returns an error.
- */
-int
-_DEFUN(pclose, (iop),
-	FILE *iop)
-{
-	register struct pid *cur, *last;
-	int pstat;
-	pid_t pid;
-
-	(void)fclose(iop);
-
-	/* Find the appropriate file pointer. */
-	for (last = NULL, cur = pidlist; cur; last = cur, cur = cur->next)
-		if (cur->fp == iop)
-			break;
-	if (cur == NULL)
-		return (-1);
-
-	do {
-		pid = waitpid(cur->pid, &pstat, 0);
-	} while (pid == -1 && errno == EINTR);
-
-	/* Remove the entry from the linked list. */
-	if (last == NULL)
-		pidlist = cur->next;
-	else
-		last->next = cur->next;
-	free(cur);
-		
-	return (pid == -1 ? -1 : pstat);
-}
diff --git a/newlib/libc/posix/readdir.c b/newlib/libc/posix/readdir.c
deleted file mode 100644
index da07d5c00..000000000
--- a/newlib/libc/posix/readdir.c
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)readdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-
-extern int getdents (int fd, void *dp, int count);
-
-/*
- * get next entry in a directory.
- */
-struct dirent *
-_DEFUN(readdir, (dirp),
-       register DIR *dirp)
-{
-  register struct dirent *dp;
- 
-#ifdef HAVE_DD_LOCK
-  __lock_acquire_recursive(dirp->dd_lock);
-#endif
-
-  if (dirp->dd_fd == -1)
-    return NULL;
- 
-  for (;;) {
-    if (dirp->dd_loc == 0) {
-      dirp->dd_size = getdents (dirp->dd_fd,
-				dirp->dd_buf,
-				dirp->dd_len);
-      
-      if (dirp->dd_size <= 0) {
-#ifdef HAVE_DD_LOCK
-        __lock_release_recursive(dirp->dd_lock);
-#endif
-	return NULL;
-      }
-    }
-    if (dirp->dd_loc >= dirp->dd_size) {
-      dirp->dd_loc = 0;
-      continue;
-    }
-    dp = (struct dirent *)(dirp->dd_buf + dirp->dd_loc);
-    if ((int)dp & 03) {	/* bogus pointer check */
-#ifdef HAVE_DD_LOCK
-      __lock_release_recursive(dirp->dd_lock);
-#endif
-      return NULL;
-    }
-    if (dp->d_reclen <= 0 ||
-	dp->d_reclen > dirp->dd_len + 1 - dirp->dd_loc) {
-#ifdef HAVE_DD_LOCK
-      __lock_release_recursive(dirp->dd_lock);
-#endif
-      return NULL;
-    }
-    dirp->dd_loc += dp->d_reclen;
-    if (dp->d_ino == 0)
-      continue;
-#ifdef HAVE_DD_LOCK
-    __lock_release_recursive(dirp->dd_lock);
-#endif
-    return (dp);
-  }
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/readdir_r.c b/newlib/libc/posix/readdir_r.c
deleted file mode 100644
index 9bc013c64..000000000
--- a/newlib/libc/posix/readdir_r.c
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/* this code is modified from readdir.c by Jeff Johnston, June 5, 2002 */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)readdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-#include <errno.h>
-#include <string.h>
-
-extern int getdents (int fd, void *dp, int count);
-
-/*
- * get next entry in a directory using supplied dirent structure.
- */
-int
-_DEFUN(readdir_r, (dirp, dp, dpp),
-	register DIR *dirp _AND
-	struct dirent *dp _AND
-	struct dirent **dpp) {
-
-struct dirent *tmpdp;
- 
-#ifdef HAVE_DD_LOCK
-  __lock_acquire_recursive(dirp->dd_lock);
-#endif
-
-  if (dirp->dd_fd == -1) {
-    *dpp = NULL;
-    return errno = EBADF;
-  }
- 
-  for (;;) {
-    if (dirp->dd_loc == 0) {
-      dirp->dd_size = getdents (dirp->dd_fd,
-				dirp->dd_buf,
-				dirp->dd_len);
-      
-      if (dirp->dd_size <= 0) {
-#ifdef HAVE_DD_LOCK
-        __lock_release_recursive(dirp->dd_lock);
-#endif
-        *dpp = NULL;
-        return errno;
-      }
-    }
-    if (dirp->dd_loc >= dirp->dd_size) {
-      dirp->dd_loc = 0;
-      continue;
-    }
-    tmpdp = (struct dirent *)(dirp->dd_buf + dirp->dd_loc);
-    memcpy (dp, tmpdp, sizeof(struct dirent));
-
-    if (dp->d_reclen <= 0 ||
-	dp->d_reclen > dirp->dd_len + 1 - dirp->dd_loc) {
-#ifdef HAVE_DD_LOCK
-      __lock_release_recursive(dirp->dd_lock);
-#endif
-      *dpp = NULL;
-      return -1;
-    }
-    dirp->dd_loc += dp->d_reclen;
-    if (dp->d_ino == 0)
-      continue;
-#ifdef HAVE_DD_LOCK
-    __lock_release_recursive(dirp->dd_lock);
-#endif
-    *dpp = dp;
-    return 0;
-  }
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/rewinddir.c b/newlib/libc/posix/rewinddir.c
deleted file mode 100644
index bffad9612..000000000
--- a/newlib/libc/posix/rewinddir.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)rewinddir.c	5.1 (Berkeley) 5/25/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-#include <sys/lock.h>
-
-void
-_DEFUN(rewinddir, (dirp),
-	DIR *dirp)
-{
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-#endif
-	_seekdir((dirp), (off_t)0);
-#ifdef HAVE_DD_LOCK
-	__lock_release_recursive(dirp->dd_lock);
-#endif
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/scandir.c b/newlib/libc/posix/scandir.c
deleted file mode 100644
index 97094a676..000000000
--- a/newlib/libc/posix/scandir.c
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)scandir.c	5.10 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Scan the directory dirname calling select to make a list of selected
- * directory entries then sort using qsort and compare routine dcomp.
- * Returns the number of entries and a pointer to a list of pointers to
- * struct dirent (through namelist). Returns -1 if there were any errors.
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/lock.h>
-
-/*
- * The DIRSIZ macro gives the minimum record length which will hold
- * the directory entry.  This requires the amount of space in struct dirent
- * without the d_name field, plus enough space for the name with a terminating
- * null byte (dp->d_namlen+1), rounded up to a 4 byte boundary.
- */
-#undef DIRSIZ
-#ifdef _DIRENT_HAVE_D_NAMLEN
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent) - (MAXNAMLEN+1)) + (((dp)->d_namlen+1 + 3) &~ 3))
-#else
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent) - (MAXNAMLEN+1)) + ((strlen((dp)->d_name)+1 + 3) &~ 3))
-#endif
-
-#ifndef __P
-#define __P(args) ()
-#endif
-
-int
-_DEFUN(scandir, (dirname, namelist, select, dcomp),
-	const char *dirname _AND
-	struct dirent ***namelist _AND
-	int (*select) __P((struct dirent *)) _AND
-	int (*dcomp) __P((const void *, const void *)))
-{
-	register struct dirent *d, *p, **names;
-	register size_t nitems;
-	struct stat stb;
-	long arraysz;
-	DIR *dirp;
-
-	if ((dirp = opendir(dirname)) == NULL)
-		return(-1);
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-#endif
-	if (fstat(dirp->dd_fd, &stb) < 0) {
-#ifdef HAVE_DD_LOCK
-		__lock_release_recursive(dirp->dd_lock);
-#endif
-		return(-1);
-	}
-
-	/*
-	 * estimate the array size by taking the size of the directory file
-	 * and dividing it by a multiple of the minimum size entry. 
-	 */
-	arraysz = (stb.st_size / 24);
-	names = (struct dirent **)malloc(arraysz * sizeof(struct dirent *));
-	if (names == NULL) {
-#ifdef HAVE_DD_LOCK
-		__lock_release_recursive(dirp->dd_lock);
-#endif
-		return(-1);
-	}
-
-	nitems = 0;
-	while ((d = readdir(dirp)) != NULL) {
-		if (select != NULL && !(*select)(d))
-			continue;	/* just selected names */
-		/*
-		 * Make a minimum size copy of the data
-		 */
-		p = (struct dirent *)malloc(DIRSIZ(d));
-		if (p == NULL) {
-#ifdef HAVE_DD_LOCK
-			__lock_release_recursive(dirp->dd_lock);
-#endif
-			return(-1);
-		}
-		p->d_ino = d->d_ino;
-		p->d_reclen = d->d_reclen;
-#ifdef _DIRENT_HAVE_D_NAMLEN
-		p->d_namlen = d->d_namlen;
-		bcopy(d->d_name, p->d_name, p->d_namlen + 1);
-#else
-               strcpy(p->d_name, d->d_name);
-#endif
-		/*
-		 * Check to make sure the array has space left and
-		 * realloc the maximum size.
-		 */
-		if (++nitems >= arraysz) {
-			if (fstat(dirp->dd_fd, &stb) < 0) {
-#ifdef HAVE_DD_LOCK
-				__lock_release_recursive(dirp->dd_lock);
-#endif
-				return(-1);	/* just might have grown */
-			}
-			arraysz = stb.st_size / 12;
-			names = (struct dirent **)realloc((char *)names,
-				arraysz * sizeof(struct dirent *));
-			if (names == NULL) {
-#ifdef HAVE_DD_LOCK
-				__lock_release_recursive(dirp->dd_lock);
-#endif
-				return(-1);
-			}
-		}
-		names[nitems-1] = p;
-	}
-	closedir(dirp);
-	if (nitems && dcomp != NULL)
-		qsort(names, nitems, sizeof(struct dirent *), dcomp);
-	*namelist = names;
-#ifdef HAVE_DD_LOCK
-	__lock_release_recursive(dirp->dd_lock);
-#endif
-	return(nitems);
-}
-
-/*
- * Alphabetic order comparison routine for those who want it.
- */
-int
-_DEFUN(alphasort, (d1, d2),
-       const struct dirent **d1 _AND
-       const struct dirent **d2)
-{
-       return(strcmp((*d1)->d_name, (*d2)->d_name));
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/seekdir.c b/newlib/libc/posix/seekdir.c
deleted file mode 100644
index 3965edabf..000000000
--- a/newlib/libc/posix/seekdir.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)seekdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-#include <sys/lock.h>
-
-/*
- * Seek to an entry in a directory.
- * _seekdir is in telldir.c so that it can share opaque data structures.
- */
-void
-_DEFUN(seekdir, (dirp, loc),
-	DIR *dirp _AND
-	long loc)
-{
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-#endif
-	_seekdir(dirp, loc);
-#ifdef HAVE_DD_LOCK
-	__lock_release_recursive(dirp->dd_lock);
-#endif
-}
-
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/posix/telldir.c b/newlib/libc/posix/telldir.c
deleted file mode 100644
index a8c5440d1..000000000
--- a/newlib/libc/posix/telldir.c
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef HAVE_OPENDIR
-
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)telldir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/lock.h>
-
-/*
- * The option SINGLEUSE may be defined to say that a telldir
- * cookie may be used only once before it is freed. This option
- * is used to avoid having memory usage grow without bound.
- */
-#define SINGLEUSE
-
-/*
- * One of these structures is malloced to describe the current directory
- * position each time telldir is called. It records the current magic 
- * cookie returned by getdirentries and the offset within the buffer
- * associated with that return value.
- */
-struct ddloc {
-	struct	ddloc *loc_next;/* next structure in list */
-	long	loc_index;	/* key associated with structure */
-	long	loc_seek;	/* magic cookie returned by getdirentries */
-	long	loc_loc;	/* offset of entry in buffer */
-	DIR    *loc_dirp;       /* DIR pointer */
-};
-
-#define	NDIRHASH	32	/* Num of hash lists, must be a power of 2 */
-#define	LOCHASH(i)	((i)&(NDIRHASH-1))
-
-static long	dd_loccnt;	/* Index of entry for sequential readdir's */
-static struct	ddloc *dd_hash[NDIRHASH];   /* Hash list heads for ddlocs */
-__LOCK_INIT(static, dd_hash_lock);
-
-/*
- * return a pointer into a directory
- */
-
-#ifndef _ELIX_LEVEL || _ELIX_LEVEL >= 2
-
-long
-_DEFUN(telldir, (dirp),
-       DIR *dirp)
-{
-	register int index;
-	register struct ddloc *lp;
-
-	if ((lp = (struct ddloc *)malloc(sizeof(struct ddloc))) == NULL)
-		return (-1);
-
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-	__lock_acquire(dd_hash_lock);
-#endif
-	index = dd_loccnt++;
-	lp->loc_index = index;
-	lp->loc_seek = dirp->dd_seek;
-	lp->loc_loc = dirp->dd_loc;
-	lp->loc_dirp = dirp;
-	lp->loc_next = dd_hash[LOCHASH(index)];
-	dd_hash[LOCHASH(index)] = lp;
-#ifdef HAVE_DD_LOCK
-	__lock_release(dd_hash_lock);
-	__lock_release_recursive(dirp->dd_lock);
-#endif
-	return (index);
-}
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-/*
- * seek to an entry in a directory.
- * Only values returned by "telldir" should be passed to seekdir.
- */
-void
-_DEFUN(_seekdir, (dirp, loc),
-	register DIR *dirp _AND
-	long loc)
-{
-	register struct ddloc *lp;
-	register struct ddloc **prevlp;
-	struct dirent *dp;
-	extern long lseek();
-
-#ifdef HAVE_DD_LOCK
-	__lock_acquire(dd_hash_lock);
-#endif
-	prevlp = &dd_hash[LOCHASH(loc)];
-	lp = *prevlp;
-	while (lp != NULL) {
-		if (lp->loc_index == loc)
-			break;
-		prevlp = &lp->loc_next;
-		lp = lp->loc_next;
-	}
-	if (lp == NULL) {
-#ifdef HAVE_DD_LOCK
-		__lock_release(dd_hash_lock);
-#endif
-		return;
-	}
-	if (lp->loc_loc == dirp->dd_loc && lp->loc_seek == dirp->dd_seek)
-		goto found;
-	(void) lseek(dirp->dd_fd, lp->loc_seek, 0);
-	dirp->dd_seek = lp->loc_seek;
-	dirp->dd_loc = 0;
-	while (dirp->dd_loc < lp->loc_loc) {
-		dp = readdir(dirp);
-		if (dp == NULL)
-			break;
-	}
-found:
-#ifdef SINGLEUSE
-	*prevlp = lp->loc_next;
-	free((caddr_t)lp);
-#endif
-#ifdef HAVE_DD_LOCK
-	__lock_release(dd_hash_lock);
-#endif
-}
-
-/* clean out any hash entries from a closed directory */
-void
-_DEFUN(_cleanupdir, (dirp),
-	register DIR *dirp)
-{
-	int i;
-
-#ifdef HAVE_DD_LOCK
-	__lock_acquire(dd_hash_lock);
-#endif
-	for (i = 0; i < NDIRHASH; ++i) {
-		register struct ddloc *lp;
-		register struct ddloc *prevlp;
-		lp = dd_hash[i];
-		while (lp != NULL && lp->loc_dirp == dirp) {
-			dd_hash[i] = lp->loc_next;
-			prevlp = lp;
-			free((caddr_t)lp);
-			lp = prevlp->loc_next;
-		}
-		prevlp = lp;
-		while (lp != NULL) {
-			lp = lp->loc_next;
-			if (lp != NULL && lp->loc_dirp == dirp) {
-				prevlp->loc_next = lp->loc_next;
-				free((caddr_t)lp);
-				lp = prevlp;
-			}
-			else
-				prevlp = lp;
-		}
-	}
-#ifdef HAVE_DD_LOCK
-	__lock_release(dd_hash_lock);
-#endif
-
-}
-#endif /* ! HAVE_OPENDIR */
diff --git a/newlib/libc/reent/Makefile.am b/newlib/libc/reent/Makefile.am
deleted file mode 100644
index dd396c33c..000000000
--- a/newlib/libc/reent/Makefile.am
+++ /dev/null
@@ -1,102 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-if HAVE_STDIO64_DIR
-STDIO64_OBJECTS = \
-	fstat64r.$(oext) \
-	lseek64r.$(oext) \
-	open64r.$(oext)
-
-STDIO64_DEFS = \
-	fstat64r.def \
-	lseek64r.def \
-	open64r.def
-endif
-
-ELIX_2_OBJS = $(STDIO64_OBJECTS)
-ELIX_3_OBJS = execr.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS = $(ELIX_2_OBJS)
-else
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS)
-endif
-endif
-
-GENERAL_SOURCES = \
-	closer.c \
-	reent.c \
-	impure.c \
-	fcntlr.c \
-	fstatr.c \
-	getreent.c \
-	linkr.c \
-	lseekr.c \
-	openr.c \
-	readr.c \
-	signalr.c \
-	signgam.c \
-	sbrkr.c \
-	statr.c \
-	timer.c \
-	unlinkr.c \
-	writer.c
-
-libreent_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libreent.la
-libreent_la_SOURCES = $(GENERAL_SOURCES)
-libreent_la_LIBADD = $(LIB_OBJS)
-libreent_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES = \
-	closer.def \
-	reent.def \
-	execr.def \
-	fcntlr.def \
-	fstatr.def \
-	linkr.def \
-	lseekr.def \
-	openr.def \
-	readr.def \
-	signalr.def \
-	sbrkr.def \
-	statr.def \
-	timer.def \
-	unlinkr.def \
-	$(STDIO64_DEFS) \
-	writer.def
-
-SUFFIXES = .def .h
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/reent.tex >> $(TARGETDOC)
-
-impure.$(oext): $(srcdir)/impure.c $(srcdir)/../include/sys/reent.h
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/reent/Makefile.in b/newlib/libc/reent/Makefile.in
deleted file mode 100644
index 07f237c7a..000000000
--- a/newlib/libc/reent/Makefile.in
+++ /dev/null
@@ -1,450 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-@HAVE_STDIO64_DIR_TRUE@STDIO64_OBJECTS = @HAVE_STDIO64_DIR_TRUE@\
-@HAVE_STDIO64_DIR_TRUE@	fstat64r.$(oext) \
-@HAVE_STDIO64_DIR_TRUE@	lseek64r.$(oext) \
-@HAVE_STDIO64_DIR_TRUE@	open64r.$(oext)
-
-@HAVE_STDIO64_DIR_TRUE@STDIO64_DEFS = @HAVE_STDIO64_DIR_TRUE@\
-@HAVE_STDIO64_DIR_TRUE@	fstat64r.def \
-@HAVE_STDIO64_DIR_TRUE@	lseek64r.def \
-@HAVE_STDIO64_DIR_TRUE@	open64r.def
-
-ELIX_2_OBJS = $(STDIO64_OBJECTS)
-ELIX_3_OBJS = execr.$(oext)
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@$(ELIX_2_OBJS) $(ELIX_3_OBJS)
-
-GENERAL_SOURCES = \
-	closer.c \
-	reent.c \
-	impure.c \
-	fcntlr.c \
-	fstatr.c \
-	getreent.c \
-	linkr.c \
-	lseekr.c \
-	openr.c \
-	readr.c \
-	signalr.c \
-	signgam.c \
-	sbrkr.c \
-	statr.c \
-	timer.c \
-	unlinkr.c \
-	writer.c
-
-
-libreent_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libreent.la
-@USE_LIBTOOL_TRUE@libreent_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libreent_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libreent_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = \
-	closer.def \
-	reent.def \
-	execr.def \
-	fcntlr.def \
-	fstatr.def \
-	linkr.def \
-	lseekr.def \
-	openr.def \
-	readr.def \
-	signalr.def \
-	sbrkr.def \
-	statr.def \
-	timer.def \
-	unlinkr.def \
-	$(STDIO64_DEFS) \
-	writer.def
-
-
-SUFFIXES = .def .h
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  closer.$(OBJEXT) reent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@impure.$(OBJEXT) fcntlr.$(OBJEXT) fstatr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getreent.$(OBJEXT) linkr.$(OBJEXT) lseekr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@openr.$(OBJEXT) readr.$(OBJEXT) signalr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@signgam.$(OBJEXT) sbrkr.$(OBJEXT) statr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@timer.$(OBJEXT) unlinkr.$(OBJEXT) writer.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libreent_la_OBJECTS =  closer.lo reent.lo impure.lo \
-@USE_LIBTOOL_TRUE@fcntlr.lo fstatr.lo getreent.lo linkr.lo lseekr.lo \
-@USE_LIBTOOL_TRUE@openr.lo readr.lo signalr.lo signgam.lo sbrkr.lo \
-@USE_LIBTOOL_TRUE@statr.lo timer.lo unlinkr.lo writer.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libreent_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libreent_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .h .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus reent/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libreent.la: $(libreent_la_OBJECTS) $(libreent_la_DEPENDENCIES)
-	$(LINK)  $(libreent_la_LDFLAGS) $(libreent_la_OBJECTS) $(libreent_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = reent
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/reent.tex >> $(TARGETDOC)
-
-impure.$(oext): $(srcdir)/impure.c $(srcdir)/../include/sys/reent.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/reent/closer.c b/newlib/libc/reent/closer.c
deleted file mode 100644
index aeacebd6c..000000000
--- a/newlib/libc/reent/closer.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Reentrant version of close system call.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_close_r>>---Reentrant version of close
-	
-INDEX
-	_close_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _close_r(struct _reent *<[ptr]>, int <[fd]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _close_r(<[ptr]>, <[fd]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-
-DESCRIPTION
-	This is a reentrant version of <<close>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_close_r (ptr, fd)
-     struct _reent *ptr;
-     int fd;
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _close (fd)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/execr.c b/newlib/libc/reent/execr.c
deleted file mode 100644
index 8bc1208d7..000000000
--- a/newlib/libc/reent/execr.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Reentrant versions of execution system calls.  These
-   implementations just call the usual system calls.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <sys/wait.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-/* If NO_EXEC is defined, we don't need these functions.  */
-
-#if defined (REENTRANT_SYSCALLS_PROVIDED) || defined (NO_EXEC)
-
-int _dummy_exec_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_execve_r>>---Reentrant version of execve	
-INDEX
-	_execve_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _execve_r(struct _reent *<[ptr]>, char *<[name]>,
-                      char **<[argv]>, char **<[env]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _execve_r(<[ptr]>, <[name]>, <[argv]>, <[env]>)
-	struct _reent *<[ptr]>;
-        char *<[name]>;
-        char **<[argv]>;
-        char **<[env]>;
-
-DESCRIPTION
-	This is a reentrant version of <<execve>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_execve_r, (ptr, name, argv, env),
-     struct _reent *ptr _AND
-     char *name _AND
-     char **argv _AND
-     char **env)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _execve (name, argv, env)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-
-/*
-FUNCTION
-	<<_fork_r>>---Reentrant version of fork
-	
-INDEX
-	_fork_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _fork_r(struct _reent *<[ptr]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _fork_r(<[ptr]>)
-	struct _reent *<[ptr]>;
-
-DESCRIPTION
-	This is a reentrant version of <<fork>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-#ifndef NO_FORK
-
-int
-_DEFUN (_fork_r, (ptr),
-     struct _reent *ptr)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _fork ()) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif
-
-/*
-FUNCTION
-	<<_wait_r>>---Reentrant version of wait
-	
-INDEX
-	_wait_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _wait_r(struct _reent *<[ptr]>, int *<[status]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _wait_r(<[ptr]>, <[status]>)
-	struct _reent *<[ptr]>;
-	int *<[status]>;
-
-DESCRIPTION
-	This is a reentrant version of <<wait>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_wait_r, (ptr, status),
-     struct _reent *ptr _AND
-     int *status)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _wait (status)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/fcntlr.c b/newlib/libc/reent/fcntlr.c
deleted file mode 100644
index d632d183f..000000000
--- a/newlib/libc/reent/fcntlr.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Reentrant versions of fcntl system call.  This implementation just
-   calls the fcntl system call.  */
-
-#include <reent.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_fcntl_r>>---Reentrant version of fcntl
-	
-INDEX
-	_fcntl_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _fcntl_r(struct _reent *<[ptr]>,
-		     int <[fd]>, int <[cmd]>, <[arg]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _fcntl_r(<[ptr]>, <[fd]>, <[cmd]>, <[arg]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	int <[cmd]>;
-	int <[arg]>;
-
-DESCRIPTION
-	This is a reentrant version of <<fcntl>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_fcntl_r, (ptr, fd, cmd, arg),
-     struct _reent *ptr _AND
-     int fd _AND
-     int cmd _AND
-     int arg)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _fcntl (fd, cmd, arg)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/fstat64r.c b/newlib/libc/reent/fstat64r.c
deleted file mode 100644
index 1c4589713..000000000
--- a/newlib/libc/reent/fstat64r.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Reentrant versions of fstat system call.  This implementation just
-   calls the fstat system call.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <sys/stat.h>
-#include <_syslist.h>
-
-#ifdef __LARGE64_FILES
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_fstat_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_fstat64_r>>---Reentrant version of fstat64
-	
-INDEX
-	_fstat64_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _fstat64_r(struct _reent *<[ptr]>,
-		       int <[fd]>, struct stat64 *<[pstat]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _fstat64_r(<[ptr]>, <[fd]>, <[pstat]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	struct stat *<[pstat]>;
-
-DESCRIPTION
-	This is a reentrant version of <<fstat64>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.  This function is only enabled on systems
-	that define __LARGE64_FILES.
-*/
-
-int
-_DEFUN (_fstat64_r, (ptr, fd, pstat),
-     struct _reent *ptr _AND
-     int fd _AND
-     struct stat64 *pstat)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _fstat64 (fd, pstat)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/reent/fstatr.c b/newlib/libc/reent/fstatr.c
deleted file mode 100644
index 7f5d559da..000000000
--- a/newlib/libc/reent/fstatr.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Reentrant versions of fstat system call.  This implementation just
-   calls the fstat system call.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <sys/stat.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_fstat_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_fstat_r>>---Reentrant version of fstat
-	
-INDEX
-	_fstat_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _fstat_r(struct _reent *<[ptr]>,
-		     int <[fd]>, struct stat *<[pstat]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _fstat_r(<[ptr]>, <[fd]>, <[pstat]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	struct stat *<[pstat]>;
-
-DESCRIPTION
-	This is a reentrant version of <<fstat>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_fstat_r (ptr, fd, pstat)
-     struct _reent *ptr;
-     int fd;
-     struct stat *pstat;
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _fstat (fd, pstat)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/getreent.c b/newlib/libc/reent/getreent.c
deleted file mode 100644
index b53ff26c8..000000000
--- a/newlib/libc/reent/getreent.c
+++ /dev/null
@@ -1,10 +0,0 @@
-/* default reentrant pointer when multithread enabled */
-
-#include <_ansi.h>
-#include <reent.h>
-
-struct _reent *
-_DEFUN_VOID(__getreent)
-{
-  return _impure_ptr;
-}
diff --git a/newlib/libc/reent/impure.c b/newlib/libc/reent/impure.c
deleted file mode 100644
index a14f5c3cd..000000000
--- a/newlib/libc/reent/impure.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <reent.h>
-
-/* Note that there is a copy of this in sys/reent.h.  */
-#ifndef __ATTRIBUTE_IMPURE_PTR__
-#define __ATTRIBUTE_IMPURE_PTR__
-#endif
-
-#ifndef __ATTRIBUTE_IMPURE_DATA__
-#define __ATTRIBUTE_IMPURE_DATA__
-#endif
-
-static struct _reent __ATTRIBUTE_IMPURE_DATA__ impure_data = _REENT_INIT (impure_data);
-struct _reent *__ATTRIBUTE_IMPURE_PTR__ _impure_ptr = &impure_data;
diff --git a/newlib/libc/reent/linkr.c b/newlib/libc/reent/linkr.c
deleted file mode 100644
index ded636af7..000000000
--- a/newlib/libc/reent/linkr.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Reentrant versions of file system calls.  These implementations
-   just call the usual system calls.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_link_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_link_r>>---Reentrant version of link
-	
-INDEX
-	_link_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _link_r(struct _reent *<[ptr]>,
-		    const char *<[old]>, const char *<[new]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _link_r(<[ptr]>, <[old]>, <[new]>)
-	struct _reent *<[ptr]>;
-	char *<[old]>;
-	char *<[new]>;
-
-DESCRIPTION
-	This is a reentrant version of <<link>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_link_r, (ptr, old, new),
-     struct _reent *ptr _AND
-     _CONST char *old _AND
-     _CONST char *new)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _link (old, new)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/lseek64r.c b/newlib/libc/reent/lseek64r.c
deleted file mode 100644
index 0207a1220..000000000
--- a/newlib/libc/reent/lseek64r.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Reentrant versions of lseek system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef __LARGE64_FILES
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_lseek64_r>>---Reentrant version of lseek
-	
-INDEX
-	_lseek64_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	off64_t _lseek64_r(struct _reent *<[ptr]>,
-		           int <[fd]>, off64_t <[pos]>, int <[whence]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	off64_t _lseek64_r(<[ptr]>, <[fd]>, <[pos]>, <[whence]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	off64_t <[pos]>;
-	int <[whence]>;
-
-DESCRIPTION
-	This is a reentrant version of <<lseek64>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.  This function only exists on a system
-        with large file support.
-*/
-
-_off64_t
-_DEFUN (_lseek64_r, (ptr, fd, pos, whence),
-     struct _reent *ptr _AND
-     int fd _AND
-     _off64_t pos _AND
-     int whence)
-{
-  _off64_t ret;
-
-  errno = 0;
-  if ((ret = _lseek64 (fd, pos, whence)) == (_off64_t) -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/reent/lseekr.c b/newlib/libc/reent/lseekr.c
deleted file mode 100644
index fa00695a8..000000000
--- a/newlib/libc/reent/lseekr.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* Reentrant versions of lseek system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_lseek_r>>---Reentrant version of lseek
-	
-INDEX
-	_lseek_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	off_t _lseek_r(struct _reent *<[ptr]>,
-		       int <[fd]>, off_t <[pos]>, int <[whence]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	off_t _lseek_r(<[ptr]>, <[fd]>, <[pos]>, <[whence]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	off_t <[pos]>;
-	int <[whence]>;
-
-DESCRIPTION
-	This is a reentrant version of <<lseek>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-_off_t
-_DEFUN (_lseek_r, (ptr, fd, pos, whence),
-     struct _reent *ptr _AND
-     int fd _AND
-     _off_t pos _AND
-     int whence)
-{
-  _off_t ret;
-
-  errno = 0;
-  if ((ret = _lseek (fd, pos, whence)) == (_off_t) -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/open64r.c b/newlib/libc/reent/open64r.c
deleted file mode 100644
index 30310d301..000000000
--- a/newlib/libc/reent/open64r.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* Reentrant versions of open system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <_syslist.h>
-
-#ifdef __LARGE64_FILES
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_open64_r>>---Reentrant version of open64
-	
-INDEX
-	_open64_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _open64_r(struct _reent *<[ptr]>,
-  		      const char *<[file]>, int <[flags]>, int <[mode]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _open64_r(<[ptr]>, <[file]>, <[flags]>, <[mode]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-	int <[flags]>;
-	int <[mode]>;
-
-DESCRIPTION
-	This is a reentrant version of <<open64>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.  This function only exists on systems with
-        large file support.
-*/
-
-int
-_open64_r (ptr, file, flags, mode)
-     struct _reent *ptr;
-     _CONST char *file;
-     int flags;
-     int mode;
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _open64 (file, flags, mode)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/reent/openr.c b/newlib/libc/reent/openr.c
deleted file mode 100644
index 35138c6de..000000000
--- a/newlib/libc/reent/openr.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Reentrant versions of open system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_open_r>>---Reentrant version of open
-	
-INDEX
-	_open_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _open_r(struct _reent *<[ptr]>,
-		    const char *<[file]>, int <[flags]>, int <[mode]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _open_r(<[ptr]>, <[file]>, <[flags]>, <[mode]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-	int <[flags]>;
-	int <[mode]>;
-
-DESCRIPTION
-	This is a reentrant version of <<open>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_open_r, (ptr, file, flags, mode),
-     struct _reent *ptr _AND
-     _CONST char *file _AND
-     int flags _AND
-     int mode)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _open (file, flags, mode)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/readr.c b/newlib/libc/reent/readr.c
deleted file mode 100644
index 38c1d9e39..000000000
--- a/newlib/libc/reent/readr.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* Reentrant versions of read system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_read_r>>---Reentrant version of read
-	
-INDEX
-	_read_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	_ssize_t _read_r(struct _reent *<[ptr]>,
-		         int <[fd]>, void *<[buf]>, size_t <[cnt]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	_ssize_t _read_r(<[ptr]>, <[fd]>, <[buf]>, <[cnt]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	char *<[buf]>;
-	size_t <[cnt]>;
-
-DESCRIPTION
-	This is a reentrant version of <<read>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-_ssize_t
-_DEFUN (_read_r, (ptr, fd, buf, cnt),
-     struct _reent *ptr _AND
-     int fd _AND
-     _PTR buf _AND
-     size_t cnt)
-{
-  _ssize_t ret;
-
-  errno = 0;
-  if ((ret = (_ssize_t)_read (fd, buf, cnt)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/reent.c b/newlib/libc/reent/reent.c
deleted file mode 100644
index 1903e4261..000000000
--- a/newlib/libc/reent/reent.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
-FUNCTION
-	<<reent>>---definition of impure data.
-	
-INDEX
-	reent
-
-DESCRIPTION
-	This module defines the impure data area used by the
-	non-reentrant functions, such as strtok.
-*/
-
-#include <stdlib.h>
-#include <reent.h>
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-int errno;
-
-#endif
-
-/* Interim cleanup code */
-
-void
-_DEFUN (cleanup_glue, (ptr, glue),
-     struct _reent *ptr _AND
-     struct _glue *glue)
-{
-  /* Have to reclaim these in reverse order: */
-  if (glue->_next)
-    cleanup_glue (ptr, glue->_next);
-
-  _free_r (ptr, glue);
-}
-
-void
-_DEFUN (_reclaim_reent, (ptr),
-     struct _reent *ptr)
-{
-  if (ptr != _impure_ptr)
-    {
-      /* used by mprec routines. */
-#ifdef _REENT_SMALL
-      if (ptr->_mp)	/* don't bother allocating it! */
-#endif
-      if (_REENT_MP_FREELIST(ptr))
-	{
-	  int i;
-	  for (i = 0; i < 15 /* _Kmax */; i++) 
-	    {
-	      struct _Bigint *thisone, *nextone;
-	
-	      nextone = _REENT_MP_FREELIST(ptr)[i];
-	      while (nextone)
-		{
-		  thisone = nextone;
-		  nextone = nextone->_next;
-		  _free_r (ptr, thisone);
-		}
-	    }    
-
-	  _free_r (ptr, _REENT_MP_FREELIST(ptr));
-	}
-
-#ifdef _REENT_SMALL
-      if (ptr->_emergency)
-	_free_r (ptr, ptr->_emergency);
-      if (ptr->_mp)
-	_free_r (ptr, ptr->_mp);
-      if (ptr->_r48)
-	_free_r (ptr, ptr->_r48);
-      if (ptr->_localtime_buf)
-	_free_r (ptr, ptr->_localtime_buf);
-      if (ptr->_asctime_buf)
-	_free_r (ptr, ptr->_asctime_buf);
-      if (ptr->_atexit._on_exit_args_ptr)
-	_free_r (ptr, ptr->_atexit._on_exit_args_ptr);
-#else
-      /* atexit stuff */
-      if ((ptr->_atexit) && (ptr->_atexit != &ptr->_atexit0))
-	{
-	  struct _atexit *p, *q;
-	  for (p = ptr->_atexit; p != &ptr->_atexit0;)
-	    {
-	      q = p;
-	      p = p->_next;
-	      _free_r (ptr, q);
-	    }
-	}
-#endif
-
-      if (ptr->_cvtbuf)
-	_free_r (ptr, ptr->_cvtbuf);
-
-      if (ptr->__sdidinit)
-	{
-	  /* cleanup won't reclaim memory 'coz usually it's run
-	     before the program exits, and who wants to wait for that? */
-	  ptr->__cleanup (ptr);
-
-	  if (ptr->__sglue._next)
-	    cleanup_glue (ptr, ptr->__sglue._next);
-	}
-
-      /* Malloc memory not reclaimed; no good way to return memory anyway. */
-
-    }
-}
-
-/*
- *  Do atexit() processing and cleanup
- *
- *  NOTE:  This is to be executed at task exit.  It does not tear anything
- *         down which is used on a global basis.
- */
-
-void
-_DEFUN (_wrapup_reent, (ptr), struct _reent *ptr)
-{
-  register struct _atexit *p;
-  register int n;
-
-  if (ptr == 0)
-      ptr = _REENT;
-
-#ifdef _REENT_SMALL
-  for (p = &ptr->_atexit, n = p->_ind; --n >= 0;)
-    (*p->_fns[n]) ();
-#else
-  for (p = ptr->_atexit; p; p = p->_next)
-    for (n = p->_ind; --n >= 0;)
-      (*p->_fns[n]) ();
-#endif
-  if (ptr->__cleanup)
-    (*ptr->__cleanup) (ptr);
-}
-
diff --git a/newlib/libc/reent/reent.tex b/newlib/libc/reent/reent.tex
deleted file mode 100644
index e76330b32..000000000
--- a/newlib/libc/reent/reent.tex
+++ /dev/null
@@ -1,117 +0,0 @@
-@node Reentrancy
-@chapter Reentrancy
-
-@cindex reentrancy
-Reentrancy is a characteristic of library functions which allows multiple
-processes to use the same address space with assurance that the values stored
-in those spaces will remain constant between calls. Cygnus's implementation
-of the library functions ensures that 
-whenever possible, these library functions are reentrant.  However,
-there are some functions that can not be trivially made reentrant.
-Hooks have been provided to allow you to use these functions in a fully
-reentrant fashion.
-
-@findex _reent
-@findex reent.h
-@cindex reentrancy structure
-These hooks use the structure @code{_reent} defined in @file{reent.h}.
-A variable defined as @samp{struct _reent} is called a @dfn{reentrancy
-structure}.  All functions which must manipulate global information are
-available in two versions.  The first version has the usual name, and
-uses a single global instance of the reentrancy structure.  The second
-has a different name, normally formed by prepending @samp{_} and
-appending @samp{_r}, and takes a pointer to the particular reentrancy
-structure to use.
-
-For example, the function @code{fopen} takes two arguments, @var{file}
-and @var{mode}, and uses the global reentrancy structure.  The function
-@code{_fopen_r} takes the arguments, @var{struct_reent}, which is a
-pointer to an instance of the reentrancy structure, @var{file}
-and @var{mode}.	
-
-There are two versions of @samp{struct _reent}, a normal one and one
-for small memory systems, controlled by the @code{_REENT_SMALL}
-definition from the (automatically included) @file{<sys/config.h>}.
-
-@cindex global reentrancy structure
-@findex _impure_ptr
-Each function which uses the global reentrancy structure uses the global
-variable @code{_impure_ptr}, which points to a reentrancy structure.
-
-This means that you have two ways to achieve reentrancy.  Both require
-that each thread of execution control initialize a unique global
-variable of type @samp{struct _reent}:
-
-@enumerate
-@item
-@cindex extra argument, reentrant fns
-Use the reentrant versions of the library functions, after initializing
-a global reentrancy structure for each process.  Use the pointer to this
-structure as the extra argument for all library functions.
-
-@item
-Ensure that each thread of execution control has a pointer to its own
-unique reentrancy structure in the global variable @code{_impure_ptr},
-and call the standard library subroutines.
-@end enumerate
-
-@cindex list of reentrant functions
-@cindex reentrant function list
-The following functions are provided in both reentrant
-and non-reentrant versions.
-
-@example
-@exdent @emph{Equivalent for errno variable:}
-_errno_r
-
-@exdent @emph{Locale functions:}
-_localeconv_r  _setlocale_r
-
-@exdent @emph{Equivalents for stdio variables:}
-_stdin_r        _stdout_r       _stderr_r
-
-@page  
-@exdent @emph{Stdio functions:}
-_fdopen_r       _perror_r       _tempnam_r
-_fopen_r        _putchar_r      _tmpnam_r
-_getchar_r      _puts_r         _tmpfile_r
-_gets_r         _remove_r       _vfprintf_r
-_iprintf_r      _rename_r       _vsnprintf_r
-_mkstemp_r      _snprintf_r     _vsprintf_r
-_mktemp_t       _sprintf_r
-
-@exdent @emph{Signal functions:}
-_init_signal_r  _signal_r
-_kill_r         __sigtramp_r
-_raise_r
-
-@exdent @emph{Stdlib functions:}
-_calloc_r       _mblen_r        _setenv_r
-_dtoa_r         _mbstowcs_r     _srand_r
-_free_r         _mbtowc_r       _strtod_r
-_getenv_r       _memalign_r     _strtol_r
-_mallinfo_r     _mstats_r       _strtoul_r
-_malloc_r       _putenv_r       _system_r
-_malloc_r       _rand_r         _wcstombs_r
-_malloc_stats_r _realloc_r      _wctomb_r
-
-@exdent @emph{String functions:}
-_strdup_r       _strtok_r
-
-@exdent @emph{System functions:}
-_close_r        _link_r         _unlink_r
-_execve_r       _lseek_r        _wait_r
-_fcntl_r        _open_r         _write_r 
-_fork_r         _read_r
-_fstat_r        _sbrk_r
-_gettimeofday_r _stat_r
-_getpid_r       _times_r
-
-@ifset STDIO64
-@exdent @emph{Additional 64-bit I/O System functions:}
-_fstat64_r	_lseek64_r	_open64_r
-@end ifset
-
-@exdent @emph{Time function:}
-_asctime_r
-@end example
diff --git a/newlib/libc/reent/sbrkr.c b/newlib/libc/reent/sbrkr.c
deleted file mode 100644
index b963307b6..000000000
--- a/newlib/libc/reent/sbrkr.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Reentrant version of sbrk system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-/* If MALLOC_PROVIDED is defined, we don't need this function.  */
-
-#if defined (REENTRANT_SYSCALLS_PROVIDED) || defined (MALLOC_PROVIDED)
-
-int _dummy_sbrk_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_sbrk_r>>---Reentrant version of sbrk
-	
-INDEX
-	_sbrk_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	void *_sbrk_r(struct _reent *<[ptr]>, ptrdiff_t <[incr]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	void *_sbrk_r(<[ptr]>, <[incr]>)
-	struct _reent *<[ptr]>;
-	ptrdiff_t <[incr]>;
-
-DESCRIPTION
-	This is a reentrant version of <<sbrk>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-void *
-_DEFUN (_sbrk_r, (ptr, incr),
-     struct _reent *ptr _AND
-     ptrdiff_t incr)
-{
-  char *ret;
-  void *_sbrk(ptrdiff_t);
-
-  errno = 0;
-  if ((ret = (char *)(_sbrk (incr))) == (void *) -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/signalr.c b/newlib/libc/reent/signalr.c
deleted file mode 100644
index 7d8aa7d71..000000000
--- a/newlib/libc/reent/signalr.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* Reentrant versions of syscalls need to support signal/raise.
-   These implementations just call the usual system calls.  */
-
-#include <reent.h>
-#include <signal.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_link_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_kill_r>>---Reentrant version of kill
-	
-INDEX
-	_kill_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _kill_r(struct _reent *<[ptr]>, int <[pid]>, int <[sig]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _kill_r(<[ptr]>, <[pid]>, <[sig]>)
-	struct _reent *<[ptr]>;
-	int <[pid]>;
-	int <[sig]>;
-
-DESCRIPTION
-	This is a reentrant version of <<kill>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_kill_r, (ptr, pid, sig),
-     struct _reent *ptr _AND
-     int pid _AND
-     int sig)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _kill (pid, sig)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-/*
-FUNCTION
-	<<_getpid_r>>---Reentrant version of getpid
-	
-INDEX
-	_getpid_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _getpid_r(struct _reent *<[ptr]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _getpid_r(<[ptr]>)
-	struct _reent *<[ptr]>;
-
-DESCRIPTION
-	This is a reentrant version of <<getpid>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-
-	We never need <<errno>>, of course, but for consistency we
-	still must have the reentrant pointer argument.
-*/
-
-int
-_DEFUN (_getpid_r, (ptr),
-     struct _reent *ptr)
-{
-  int ret;
-  ret = _getpid ();
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/signgam.c b/newlib/libc/reent/signgam.c
deleted file mode 100644
index bfb2dea51..000000000
--- a/newlib/libc/reent/signgam.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* The signgam variable is stored in the reentrancy structure.  This
-   function returns its address for use by the macro signgam defined in
-   math.h.  */
-
-#include <math.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-int *
-_DEFUN_VOID (__signgam)
-{
-  return &_REENT_SIGNGAM(_REENT);
-}
-
-#endif
diff --git a/newlib/libc/reent/statr.c b/newlib/libc/reent/statr.c
deleted file mode 100644
index 9ad2bb209..000000000
--- a/newlib/libc/reent/statr.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Reentrant versions of stat system call.  This implementation just
-   calls the stat system call.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <sys/stat.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in
-   TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_stat_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_stat_r>>---Reentrant version of stat
-	
-INDEX
-	_stat_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _stat_r(struct _reent *<[ptr]>,
-		    const char *<[file]>, struct stat *<[pstat]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _stat_r(<[ptr]>, <[file]>, <[pstat]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-	struct stat *<[pstat]>;
-
-DESCRIPTION
-	This is a reentrant version of <<stat>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_stat_r, (ptr, file, pstat),
-     struct _reent *ptr _AND
-     _CONST char *file _AND
-     struct stat *pstat)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _stat (file, pstat)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/timer.c b/newlib/libc/reent/timer.c
deleted file mode 100644
index b604b90f3..000000000
--- a/newlib/libc/reent/timer.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Reentrant versions of times and gettimeofday system calls for the
-   clock and time ANSI C routines.
-   This implementation just calls the times/gettimeofday system calls.
-   Gettimeofday may not be available on all targets.  It's presence
-   here is dubious.  Consider it for internal use only.  */
-
-#include <reent.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/times.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-
-int _dummy_time_syscalls = 1;
-
-#else
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_times_r>>---Reentrant version of times
-	
-INDEX
-	_times_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	#include <sys/times.h>
-	clock_t _times_r(struct _reent *<[ptr]>, struct tms *<[ptms]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	#include <sys/times.h>
-	clock_t _times_r(<[ptr]>, <[ptms]>)
-	struct _reent *<[ptr]>;
-	struct tms *<[ptms]>;
-
-DESCRIPTION
-	This is a reentrant version of <<times>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-clock_t
-_DEFUN (_times_r, (ptr, ptms),
-     struct _reent *ptr _AND
-     struct tms *ptms)
-{
-  clock_t ret;
-
-  ret = _times (ptms);
-  return ret;
-}
-
-/*
-FUNCTION
-	<<_gettimeofday_r>>---Reentrant version of gettimeofday
-	
-INDEX
-	_gettimeofday_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	#include <time.h>
-	int _gettimeofday_r(struct _reent *<[ptr]>,
-		struct timeval *<[ptimeval]>,
-		struct timezone *<[ptimezone]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	#include <time.h>
-	int _gettimeofday_r(<[ptr]>, <[ptimeval]>, <[ptimezone]>)
-	struct _reent *<[ptr]>;
-	struct timeval *<[ptimeval]>;
-	struct timezone *<[ptimezone]>;
-
-DESCRIPTION
-	This is a reentrant version of <<gettimeofday>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-
-	This function is only available for a few targets.
-	Check libc.a to see if its available on yours.
-*/
-
-int
-_DEFUN (_gettimeofday_r, (ptr, ptimeval, ptimezone),
-     struct _reent *ptr _AND
-     struct timeval *ptimeval _AND
-     struct timezone *ptimezone)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _gettimeofday (ptimeval, ptimezone)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/unlinkr.c b/newlib/libc/reent/unlinkr.c
deleted file mode 100644
index 95b815f1b..000000000
--- a/newlib/libc/reent/unlinkr.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Reentrant versions of file system calls.  These implementations
-   just call the usual system calls.  */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of these functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_unlink_r>>---Reentrant version of unlink
-	
-INDEX
-	_unlink_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	int _unlink_r(struct _reent *<[ptr]>, const char *<[file]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	int _unlink_r(<[ptr]>, <[file]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-
-DESCRIPTION
-	This is a reentrant version of <<unlink>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-int
-_DEFUN (_unlink_r, (ptr, file),
-     struct _reent *ptr _AND
-     _CONST char *file)
-{
-  int ret;
-
-  errno = 0;
-  if ((ret = _unlink (file)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/reent/writer.c b/newlib/libc/reent/writer.c
deleted file mode 100644
index 128f7f7ac..000000000
--- a/newlib/libc/reent/writer.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* Reentrant versions of write system call. */
-
-#include <reent.h>
-#include <unistd.h>
-#include <_syslist.h>
-
-/* Some targets provides their own versions of this functions.  Those
-   targets should define REENTRANT_SYSCALLS_PROVIDED in TARGET_CFLAGS.  */
-
-#ifdef _REENT_ONLY
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-#define REENTRANT_SYSCALLS_PROVIDED
-#endif
-#endif
-
-#ifndef REENTRANT_SYSCALLS_PROVIDED
-
-/* We use the errno variable used by the system dependent layer.  */
-#undef errno
-extern int errno;
-
-/*
-FUNCTION
-	<<_write_r>>---Reentrant version of write
-	
-INDEX
-	_write_r
-
-ANSI_SYNOPSIS
-	#include <reent.h>
-	_ssize_t _write_r(struct _reent *<[ptr]>,
-		          int <[fd]>, const void *<[buf]>, size_t <[cnt]>);
-
-TRAD_SYNOPSIS
-	#include <reent.h>
-	_ssize_t _write_r(<[ptr]>, <[fd]>, <[buf]>, <[cnt]>)
-	struct _reent *<[ptr]>;
-	int <[fd]>;
-	char *<[buf]>;
-	size_t <[cnt]>;
-
-DESCRIPTION
-	This is a reentrant version of <<write>>.  It
-	takes a pointer to the global data block, which holds
-	<<errno>>.
-*/
-
-_ssize_t
-_DEFUN (_write_r, (ptr, fd, buf, cnt),
-     struct _reent *ptr _AND
-     int fd _AND
-     _CONST _PTR buf _AND
-     size_t cnt)
-{
-  _ssize_t ret;
-
-  errno = 0;
-  if ((ret = (_ssize_t)_write (fd, buf, cnt)) == -1 && errno != 0)
-    ptr->_errno = errno;
-  return ret;
-}
-
-#endif /* ! defined (REENTRANT_SYSCALLS_PROVIDED) */
diff --git a/newlib/libc/saber b/newlib/libc/saber
deleted file mode 100644
index 4f16f976e..000000000
--- a/newlib/libc/saber
+++ /dev/null
@@ -1,185 +0,0 @@
-setopt sys_load_flags -L/lib -L/usr/lib -I/limbo/unsupported/packages/CenterLine/general/unsupported/sparc
-setopt load_flags -I./include -I./machine/sparc -I./sys/sun4 
-
-
-load signal/raise.c
-load signal/signal.c
-load stdio/clearerr.c
-load stdio/cvt.c
-load stdio/dcvt.c
-load stdio/fclose.c
-load stdio/feof.c
-load stdio/ferror.c
-load stdio/fflush.c
-load stdio/fgetc.c
-load stdio/fgetpos.c
-load stdio/fgets.c
-load stdio/findfp.c
-load stdio/flags.c
-load stdio/fopen.c
-
-load stdio/fputc.c
-load stdio/fputs.c
-load stdio/fread.c
-load stdio/freopen.c
-load stdio/fscanf.c
-load stdio/fseek.c
-load stdio/fsetpos.c
-load stdio/ftell.c
-load stdio/fvwrite.c
-load stdio/fwalk.c
-load stdio/fwrite.c
-load stdio/getc.c
-load stdio/getchar.c
-load stdio/gets.c
-load stdio/iprintf.c
-load stdio/makebuf.c
-load stdio/perror.c
-load stdio/printf.c
-load stdio/putc.c
-load stdio/putchar.c
-load stdio/puts.c
-load stdio/refill.c
-load stdio/remove.c
-load stdio/rename.c
-load stdio/rewind.c
-load stdio/rget.c
-load stdio/scanf.c
-load stdio/setbuf.c
-load stdio/setvbuf.c
-load stdio/sprintf.c
-load stdio/sscanf.c
-load stdio/stdio.c
-load stdio/tmpfile.c
-load stdio/tmpnam.c
-load stdio/ungetc.c
-load stdio/vfiprintf.c
-load stdio/vfprintf.c
-load stdio/vfscanf.c
-load stdio/vprintf.c
-load stdio/vsprintf.c
-load stdio/wbuf.c
-load stdio/wsetup.c
-load stdlib/__adjust.c
-load stdlib/__exp10.c
-load stdlib/__ten_mu.c
-load stdlib/abort.c
-load stdlib/abs.c
-load stdlib/assert.c
-load stdlib/atexit.c
-load stdlib/atof.c
-load stdlib/atoi.c
-load stdlib/atol.c
-load stdlib/bsearch.c
-load stdlib/calloc.c
-load stdlib/div.c
-load stdlib/efgcvt.c
-load stdlib/exit.c
-load stdlib/getenv.c
-load stdlib/labs.c
-load stdlib/ldiv.c
-load stdlib/malloc.c
-load stdlib/mbtowc.c
-load stdlib/qsort.c
-load stdlib/rand.c
-load stdlib/strtod.c
-load stdlib/strtol.c
-load stdlib/strtoul.c
-load stdlib/system.c
-load stdlib/wctomb.c
-load string/bcmp.c
-load string/bcopy.c
-load string/bzero.c
-load string/index.c
-load string/memchr.c
-load string/memcmp.c
-load string/memcpy.c
-load string/memmove.c
-load string/memset.c
-load string/rindex.c
-load string/strcat.c
-load string/strchr.c
-load string/strcmp.c
-load string/strcoll.c
-load string/strcpy.c
-load string/strcspn.c
-load string/strerror.c
-load string/strlen.c
-load string/strncat.c
-load string/strncmp.c
-load string/strncpy.c
-load string/strpbrk.c
-load string/strrchr.c
-load string/strspn.c
-load string/strstr.c
-load string/strtok.c
-load string/strxfrm.c
-time/asctime.c
-time/clock.c
-time/ctime.c
-time/difftime.c
-time/gmtime.c
-time/localtime.c
-time/mktime.c
-time/strftime.c
-
-
-load stdio/fiprintf.c
-load stdio/fprintf.c
-load ctype/ctype_.c
-load ctype/isalnum.c
-load ctype/isalpha.c
-load ctype/isascii.c
-load ctype/iscntrl.c
-load ctype/isdigit.c
-load ctype/islower.c
-load ctype/isprint.c
-load ctype/ispunct.c
-load ctype/isspace.c
-load ctype/isupper.c
-load ctype/isxdigit.c
-load ctype/toascii.c
-load ctype/tolower.c
-load ctype/toupper.c
-load errno/errno.c
-/*load ieeefp/fpmask.c
-load ieeefp/fpround.c
-load ieeefp/fpsticky.c
-load ieeefp/infinity.c
-load ieeefp/isnan.c
-load locale/locale.c
-load math/acos.c
-load math/acosh.c
-load math/asin.c
-load math/asinh.c
-load math/atan.c
-load math/atan2.c
-load math/atanh.c
-load math/bessel.c
-load math/copysign.c
-load math/cosh.c
-load math/erf.c
-load math/error.c
-load math/exp.c
-load math/fabs.c
-load math/floor.c
-load math/fmod.c
-load math/frexp.c
-load math/gamma.c
-load math/hypot.c
-load math/ldexp.c
-load math/log.c
-load math/log10.c
-load math/log1p.c
-load math/log2.c
-load math/log__L.c
-load math/matherr.c
-load math/modf.c
-load math/pow.c
-load math/scalb.c
-load math/sincos.c
-load math/sinh.c
-load math/sqrt.c
-load math/tan.c
-load math/tanh.c
-*/
diff --git a/newlib/libc/search/Makefile.am b/newlib/libc/search/Makefile.am
deleted file mode 100644
index d170cfa3a..000000000
--- a/newlib/libc/search/Makefile.am
+++ /dev/null
@@ -1,67 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	bsearch.c \
-	db_local.h \
-	extern.h \
-	hash.h \
-	page.h \
-	qsort.c
-
-## Following are EL/IX level 2 interfaces
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	hash.$(oext) \
-	hash_bigkey.$(oext) \
-	hash_buf.$(oext) \
-	hash_func.$(oext) \
-	hash_log2.$(oext) \
-	hash_page.$(oext) \
-	hcreate.$(oext) \
-	hcreate_r.$(oext) \
-	tdelete.$(oext) \
-	tdestroy.$(oext) \
-	tfind.$(oext) \
-	tsearch.$(oext) \
-	twalk.$(oext)
-endif
-
-libsearch_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libsearch.la
-libsearch_la_SOURCES = $(GENERAL_SOURCES)
-libsearch_la_LIBADD = $(LIB_OBJS)
-libsearch_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-SUFFIXES = .def
-
-CHEWOUT_FILES =
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-
-include $(srcdir)/../../Makefile.shared
diff --git a/newlib/libc/search/Makefile.in b/newlib/libc/search/Makefile.in
deleted file mode 100644
index 2aa82fe1a..000000000
--- a/newlib/libc/search/Makefile.in
+++ /dev/null
@@ -1,410 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	bsearch.c \
-	db_local.h \
-	extern.h \
-	hash.h \
-	page.h \
-	qsort.c
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	hash.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hash_bigkey.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hash_buf.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hash_func.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hash_log2.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hash_page.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hcreate.$(oext) \
-@ELIX_LEVEL_1_FALSE@	hcreate_r.$(oext) \
-@ELIX_LEVEL_1_FALSE@	tdelete.$(oext) \
-@ELIX_LEVEL_1_FALSE@	tdestroy.$(oext) \
-@ELIX_LEVEL_1_FALSE@	tfind.$(oext) \
-@ELIX_LEVEL_1_FALSE@	tsearch.$(oext) \
-@ELIX_LEVEL_1_FALSE@	twalk.$(oext)
-
-libsearch_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libsearch.la
-@USE_LIBTOOL_TRUE@libsearch_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libsearch_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libsearch_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-SUFFIXES = .def
-
-CHEWOUT_FILES = 
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  bsearch.$(OBJEXT) qsort.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libsearch_la_OBJECTS =  bsearch.lo qsort.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libsearch_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libsearch_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus search/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libsearch.la: $(libsearch_la_OBJECTS) $(libsearch_la_DEPENDENCIES)
-	$(LINK)  $(libsearch_la_LDFLAGS) $(libsearch_la_OBJECTS) $(libsearch_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = search
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/search/bsearch.c b/newlib/libc/search/bsearch.c
deleted file mode 100644
index b9539aa3b..000000000
--- a/newlib/libc/search/bsearch.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * bsearch.c
- * Original Author:	G. Haley
- * Rewritten by:	G. Noer
- *
- * Searches an array of nmemb members, the initial member of which is pointed
- * to by base, for a member that matches the object pointed to by key. The
- * contents of the array shall be in ascending order according to a comparison
- * function pointed to by compar. The function shall return an integer less
- * than, equal to or greater than zero if the first argument is considered to be
- * respectively less than, equal to or greater than the second. Returns a
- * pointer to the matching member of the array, or a null pointer if no match
- * is found.
- */
-
-/*
-FUNCTION
-<<bsearch>>---binary search
-
-INDEX
-	bsearch
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void *bsearch(const void *<[key]>, const void *<[base]>,
-		size_t <[nmemb]>, size_t <[size]>,
-		int (*<[compar]>)(const void *, const void *));
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *bsearch(<[key]>, <[base]>, <[nmemb]>, <[size]>, <[compar]>)
-	char *<[key]>;
-	char *<[base]>;
-	size_t <[nmemb]>, <[size]>;
-	int (*<[compar]>)();
-
-DESCRIPTION
-<<bsearch>> searches an array beginning at <[base]> for any element
-that matches <[key]>, using binary search.  <[nmemb]> is the element
-count of the array; <[size]> is the size of each element.
-
-The array must be sorted in ascending order with respect to the
-comparison function <[compar]> (which you supply as the last argument of
-<<bsearch>>).
-
-You must define the comparison function <<(*<[compar]>)>> to have two
-arguments; its result must be negative if the first argument is
-less than the second, zero if the two arguments match, and
-positive if the first argument is greater than the second (where
-``less than'' and ``greater than'' refer to whatever arbitrary
-ordering is appropriate).
-
-RETURNS
-Returns a pointer to an element of <[array]> that matches <[key]>.  If
-more than one matching element is available, the result may point to
-any of them.
-
-PORTABILITY
-<<bsearch>> is ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdlib.h>
-
-_PTR
-_DEFUN (bsearch, (key, base, nmemb, size, compar),
-	_CONST _PTR key _AND
-	_CONST _PTR base _AND
-	size_t nmemb _AND
-	size_t size _AND
-	int _EXFUN ((*compar), (const _PTR, const _PTR)))
-{
-  _PTR current;
-  size_t lower = 0;
-  size_t upper = nmemb;
-  size_t index;
-  int result;
-
-  if (nmemb == 0 || size == 0)
-    return NULL;
-
-  while (lower < upper)
-    {
-      index = (lower + upper) / 2;
-      current = (_PTR) (((char *) base) + (index * size));
-
-      result = compar (key, current);
-
-      if (result < 0)
-        upper = index;
-      else if (result > 0)
-        lower = index + 1;
-      else
-	return current;
-    }
-
-  return NULL;
-}
-
diff --git a/newlib/libc/search/db_local.h b/newlib/libc/search/db_local.h
deleted file mode 100644
index 53f9d17ff..000000000
--- a/newlib/libc/search/db_local.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)db.h	8.7 (Berkeley) 6/16/94
- * $FreeBSD: src/include/db.h,v 1.5 2002/03/26 01:35:05 bde Exp $
- */
-
-#ifndef _DB_H_
-#define	_DB_H_
-
-#include <sys/types.h>
-#include <sys/cdefs.h>
-#include <sys/config.h>
-
-#include <limits.h>
-
-#define	RET_ERROR	-1		/* Return values. */
-#define	RET_SUCCESS	 0
-#define	RET_SPECIAL	 1
-
-#define	MAX_PAGE_NUMBER	0xffffffff	/* >= # of pages in a file */
-typedef __uint32_t	pgno_t;
-#define	MAX_PAGE_OFFSET	65535		/* >= # of bytes in a page */
-typedef __uint16_t	indx_t;
-#define	MAX_REC_NUMBER	0xffffffff	/* >= # of records in a tree */
-typedef __uint32_t	recno_t;
-
-/* Key/data structure -- a Data-Base Thang. */
-typedef struct {
-	void	*data;			/* data */
-	size_t	 size;			/* data length */
-} DBT;
-
-/* Routine flags. */
-#define	R_CURSOR	1		/* del, put, seq */
-#define	__R_UNUSED	2		/* UNUSED */
-#define	R_FIRST		3		/* seq */
-#define	R_IAFTER	4		/* put (RECNO) */
-#define	R_IBEFORE	5		/* put (RECNO) */
-#define	R_LAST		6		/* seq (BTREE, RECNO) */
-#define	R_NEXT		7		/* seq */
-#define	R_NOOVERWRITE	8		/* put */
-#define	R_PREV		9		/* seq (BTREE, RECNO) */
-#define	R_SETCURSOR	10		/* put (RECNO) */
-#define	R_RECNOSYNC	11		/* sync (RECNO) */
-
-typedef enum { DB_BTREE, DB_HASH, DB_RECNO } DBTYPE;
-
-/*
- * !!!
- * The following flags are included in the dbopen(3) call as part of the
- * open(2) flags.  In order to avoid conflicts with the open flags, start
- * at the top of the 16 or 32-bit number space and work our way down.  If
- * the open flags were significantly expanded in the future, it could be
- * a problem.  Wish I'd left another flags word in the dbopen call.
- *
- * !!!
- * None of this stuff is implemented yet.  The only reason that it's here
- * is so that the access methods can skip copying the key/data pair when
- * the DB_LOCK flag isn't set.
- */
-#if UINT_MAX > 65535
-#define	DB_LOCK		0x20000000	/* Do locking. */
-#define	DB_SHMEM	0x40000000	/* Use shared memory. */
-#define	DB_TXN		0x80000000	/* Do transactions. */
-#else
-#define	DB_LOCK		    0x2000	/* Do locking. */
-#define	DB_SHMEM	    0x4000	/* Use shared memory. */
-#define	DB_TXN		    0x8000	/* Do transactions. */
-#endif
-
-/* Access method description structure. */
-typedef struct __db {
-	DBTYPE type;			/* Underlying db type. */
-	int (*close)(struct __db *);
-	int (*del)(const struct __db *, const DBT *, u_int);
-	int (*get)(const struct __db *, const DBT *, DBT *, u_int);
-	int (*put)(const struct __db *, DBT *, const DBT *, u_int);
-	int (*seq)(const struct __db *, DBT *, DBT *, u_int);
-	int (*sync)(const struct __db *, u_int);
-	void *internal;			/* Access method private. */
-	int (*fd)(const struct __db *);
-} DB;
-
-#define	BTREEMAGIC	0x053162
-#define	BTREEVERSION	3
-
-/* Structure used to pass parameters to the btree routines. */
-typedef struct {
-#define	R_DUP		0x01	/* duplicate keys */
-	u_long	flags;
-	u_int	cachesize;	/* bytes to cache */
-	int	maxkeypage;	/* maximum keys per page */
-	int	minkeypage;	/* minimum keys per page */
-	u_int	psize;		/* page size */
-	int	(*compare)	/* comparison function */
-	    (const DBT *, const DBT *);
-	size_t	(*prefix)	/* prefix function */
-	    (const DBT *, const DBT *);
-	int	lorder;		/* byte order */
-} BTREEINFO;
-
-#define	HASHMAGIC	0x061561
-#define	HASHVERSION	2
-
-/* Structure used to pass parameters to the hashing routines. */
-typedef struct {
-	u_int	bsize;		/* bucket size */
-	u_int	ffactor;	/* fill factor */
-	u_int	nelem;		/* number of elements */
-	u_int	cachesize;	/* bytes to cache */
-	__uint32_t		/* hash function */
-		(*hash)(const void *, size_t);
-	int	lorder;		/* byte order */
-} HASHINFO;
-
-/* Structure used to pass parameters to the record routines. */
-typedef struct {
-#define	R_FIXEDLEN	0x01	/* fixed-length records */
-#define	R_NOKEY		0x02	/* key not required */
-#define	R_SNAPSHOT	0x04	/* snapshot the input */
-	u_long	flags;
-	u_int	cachesize;	/* bytes to cache */
-	u_int	psize;		/* page size */
-	int	lorder;		/* byte order */
-	size_t	reclen;		/* record length (fixed-length records) */
-	u_char	bval;		/* delimiting byte (variable-length records */
-	char	*bfname;	/* btree file name */ 
-} RECNOINFO;
-
-/*
- * Little endian <==> big endian 32-bit swap macros.
- *	M_32_SWAP	swap a memory location
- *	P_32_SWAP	swap a referenced memory location
- *	P_32_COPY	swap from one location to another
- */
-#define	M_32_SWAP(a) {							\
-	__uint32_t _tmp = a;						\
-	((char *)&a)[0] = ((char *)&_tmp)[3];				\
-	((char *)&a)[1] = ((char *)&_tmp)[2];				\
-	((char *)&a)[2] = ((char *)&_tmp)[1];				\
-	((char *)&a)[3] = ((char *)&_tmp)[0];				\
-}
-#define	P_32_SWAP(a) {							\
-	__uint32_t _tmp = *(__uint32_t *)a;				\
-	((char *)a)[0] = ((char *)&_tmp)[3];				\
-	((char *)a)[1] = ((char *)&_tmp)[2];				\
-	((char *)a)[2] = ((char *)&_tmp)[1];				\
-	((char *)a)[3] = ((char *)&_tmp)[0];				\
-}
-#define	P_32_COPY(a, b) {						\
-	((char *)&(b))[0] = ((char *)&(a))[3];				\
-	((char *)&(b))[1] = ((char *)&(a))[2];				\
-	((char *)&(b))[2] = ((char *)&(a))[1];				\
-	((char *)&(b))[3] = ((char *)&(a))[0];				\
-}
-
-/*
- * Little endian <==> big endian 16-bit swap macros.
- *	M_16_SWAP	swap a memory location
- *	P_16_SWAP	swap a referenced memory location
- *	P_16_COPY	swap from one location to another
- */
-#define	M_16_SWAP(a) {							\
-	__uint16_t _tmp = a;						\
-	((char *)&a)[0] = ((char *)&_tmp)[1];				\
-	((char *)&a)[1] = ((char *)&_tmp)[0];				\
-}
-#define	P_16_SWAP(a) {							\
-	__uint16_t _tmp = *(__uint16_t *)a;				\
-	((char *)a)[0] = ((char *)&_tmp)[1];				\
-	((char *)a)[1] = ((char *)&_tmp)[0];				\
-}
-#define	P_16_COPY(a, b) {						\
-	((char *)&(b))[0] = ((char *)&(a))[1];				\
-	((char *)&(b))[1] = ((char *)&(a))[0];				\
-}
-
-__BEGIN_DECLS
-DB *dbopen(const char *, int, int, DBTYPE, const void *);
-
-#ifdef __DBINTERFACE_PRIVATE
-DB	*__bt_open(const char *, int, int, const BTREEINFO *, int);
-DB	*__hash_open(const char *, int, int, const HASHINFO *, int);
-DB	*__rec_open(const char *, int, int, const RECNOINFO *, int);
-void	 __dbpanic(DB *dbp);
-#endif
-__END_DECLS
-#endif /* !_DB_H_ */
diff --git a/newlib/libc/search/extern.h b/newlib/libc/search/extern.h
deleted file mode 100644
index 666a6e5bf..000000000
--- a/newlib/libc/search/extern.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*-
- * Copyright (c) 1991, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)extern.h	8.4 (Berkeley) 6/16/94
- * $FreeBSD: src/lib/libc/db/hash/extern.h,v 1.3 2002/03/22 09:18:22 obrien Exp $
- */
-
-BUFHEAD	*__add_ovflpage(HTAB *, BUFHEAD *);
-int	 __addel(HTAB *, BUFHEAD *, const DBT *, const DBT *);
-int	 __big_delete(HTAB *, BUFHEAD *);
-int	 __big_insert(HTAB *, BUFHEAD *, const DBT *, const DBT *);
-int	 __big_keydata(HTAB *, BUFHEAD *, DBT *, DBT *, int);
-int	 __big_return(HTAB *, BUFHEAD *, int, DBT *, int);
-int	 __big_split(HTAB *, BUFHEAD *, BUFHEAD *, BUFHEAD *,
-		int, __uint32_t, SPLIT_RETURN *);
-int	 __buf_free(HTAB *, int, int);
-void	 __buf_init(HTAB *, int);
-__uint32_t	 __call_hash(HTAB *, char *, int);
-int	 __delpair(HTAB *, BUFHEAD *, int);
-int	 __expand_table(HTAB *);
-int	 __find_bigpair(HTAB *, BUFHEAD *, int, char *, int);
-__uint16_t	 __find_last_page(HTAB *, BUFHEAD **);
-void	 __free_ovflpage(HTAB *, BUFHEAD *);
-BUFHEAD	*__get_buf(HTAB *, __uint32_t, BUFHEAD *, int);
-int	 __get_page(HTAB *, char *, __uint32_t, int, int, int);
-int	 __ibitmap(HTAB *, int, int, int);
-__uint32_t	 __log2(__uint32_t);
-int	 __put_page(HTAB *, char *, __uint32_t, int, int);
-void	 __reclaim_buf(HTAB *, BUFHEAD *);
-int	 __split_page(HTAB *, __uint32_t, __uint32_t);
-
-/* Default hash routine. */
-extern __uint32_t (*__default_hash)(const void *, size_t);
-
-#ifdef HASH_STATISTICS
-extern int hash_accesses, hash_collisions, hash_expansions, hash_overflows;
-#endif
diff --git a/newlib/libc/search/hash.c b/newlib/libc/search/hash.c
deleted file mode 100644
index 1b045e83f..000000000
--- a/newlib/libc/search/hash.c
+++ /dev/null
@@ -1,1023 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/param.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash.c	8.9 (Berkeley) 6/16/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/stat.h>
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#ifdef DEBUG
-#include <assert.h>
-#endif
-
-#include "db_local.h"
-#include "hash.h"
-#include "page.h"
-#include "extern.h"
-
-static int   alloc_segs(HTAB *, int);
-static int   flush_meta(HTAB *);
-static int   hash_access(HTAB *, ACTION, DBT *, DBT *);
-static int   hash_close(DB *);
-static int   hash_delete(const DB *, const DBT *, __uint32_t);
-static int   hash_fd(const DB *);
-static int   hash_get(const DB *, const DBT *, DBT *, __uint32_t);
-static int   hash_put(const DB *, DBT *, const DBT *, __uint32_t);
-static void *hash_realloc(SEGMENT **, int, int);
-static int   hash_seq(const DB *, DBT *, DBT *, __uint32_t);
-static int   hash_sync(const DB *, __uint32_t);
-static int   hdestroy(HTAB *);
-static HTAB *init_hash(HTAB *, const char *, HASHINFO *);
-static int   init_htab(HTAB *, int);
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-static void  swap_header(HTAB *);
-static void  swap_header_copy(HASHHDR *, HASHHDR *);
-#endif
-
-/* Macros for min/max.  */
-#define MIN(a,b) (((a)<(b))?(a):(b))
-#define MAX(a,b) (((a)>(b))?(a):(b))
-
-/* Fast arithmetic, relying on powers of 2, */
-#define MOD(x, y)		((x) & ((y) - 1))
-
-#define RETURN_ERROR(ERR, LOC)	{ save_errno = ERR; goto LOC; }
-
-/* Return values */
-#define	SUCCESS	 (0)
-#define	ERROR	(-1)
-#define	ABNORMAL (1)
-
-#ifdef HASH_STATISTICS
-int hash_accesses, hash_collisions, hash_expansions, hash_overflows;
-#endif
-
-/************************** INTERFACE ROUTINES ***************************/
-/* OPEN/CLOSE */
-
-extern DB *
-__hash_open(file, flags, mode, info, dflags)
-	const char *file;
-	int flags, mode, dflags;
-	const HASHINFO *info;	/* Special directives for create */
-{
-	HTAB *hashp;
-
-	struct stat statbuf;
-	DB *dbp;
-	int bpages, hdrsize, new_table, nsegs, save_errno;
-
-	if ((flags & O_ACCMODE) == O_WRONLY) {
-		errno = EINVAL;
-		return (NULL);
-	}
-
-	if (!(hashp = (HTAB *)calloc(1, sizeof(HTAB))))
-		return (NULL);
-	hashp->fp = -1;
-
-	/*
-	 * Even if user wants write only, we need to be able to read
-	 * the actual file, so we need to open it read/write. But, the
-	 * field in the hashp structure needs to be accurate so that
-	 * we can check accesses.
-	 */
-	hashp->flags = flags;
-
-	new_table = 0;
-	if (!file || (flags & O_TRUNC) ||
-#ifdef __USE_INTERNAL_STAT64
-	    (stat64(file, &statbuf) && (errno == ENOENT))) {
-#else
-	    (stat(file, &statbuf) && (errno == ENOENT))) {
-#endif
-		if (errno == ENOENT)
-			errno = 0; /* Just in case someone looks at errno */
-		new_table = 1;
-	}
-	if (file) {
-		if ((hashp->fp = open(file, flags, mode)) == -1)
-			RETURN_ERROR(errno, error0);
-
-		/* if the .db file is empty, and we had permission to create
-		   a new .db file, then reinitialize the database */
-		if ((flags & O_CREAT) &&
-#ifdef __USE_INTERNAL_STAT64
-		     fstat64(hashp->fp, &statbuf) == 0 && statbuf.st_size == 0)
-#else
-		     fstat(hashp->fp, &statbuf) == 0 && statbuf.st_size == 0)
-#endif
-			new_table = 1;
-
-#ifdef HAVE_FCNTL
-		(void)fcntl(hashp->fp, F_SETFD, 1);
-#endif
-	}
-	if (new_table) {
-		if (!(hashp = init_hash(hashp, file, (HASHINFO *)info)))
-			RETURN_ERROR(errno, error1);
-	} else {
-		/* Table already exists */
-		if (info && info->hash)
-			hashp->hash = info->hash;
-		else
-			hashp->hash = __default_hash;
-
-		hdrsize = read(hashp->fp, &hashp->hdr, sizeof(HASHHDR));
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-		swap_header(hashp);
-#endif
-		if (hdrsize == -1)
-			RETURN_ERROR(errno, error1);
-		if (hdrsize != sizeof(HASHHDR))
-			RETURN_ERROR(EFTYPE, error1);
-		/* Verify file type, versions and hash function */
-		if (hashp->MAGIC != HASHMAGIC)
-			RETURN_ERROR(EFTYPE, error1);
-#define	OLDHASHVERSION	1
-		if (hashp->HASH_VERSION != HASHVERSION &&
-		    hashp->HASH_VERSION != OLDHASHVERSION)
-			RETURN_ERROR(EFTYPE, error1);
-		if (hashp->hash(CHARKEY, sizeof(CHARKEY)) != hashp->H_CHARKEY)
-			RETURN_ERROR(EFTYPE, error1);
-		/*
-		 * Figure out how many segments we need.  Max_Bucket is the
-		 * maximum bucket number, so the number of buckets is
-		 * max_bucket + 1.
-		 */
-		nsegs = (hashp->MAX_BUCKET + 1 + hashp->SGSIZE - 1) /
-			 hashp->SGSIZE;
-		hashp->nsegs = 0;
-		if (alloc_segs(hashp, nsegs))
-			/*
-			 * If alloc_segs fails, table will have been destroyed
-			 * and errno will have been set.
-			 */
-			return (NULL);
-		/* Read in bitmaps */
-		bpages = (hashp->SPARES[hashp->OVFL_POINT] +
-		    (hashp->BSIZE << BYTE_SHIFT) - 1) >>
-		    (hashp->BSHIFT + BYTE_SHIFT);
-
-		hashp->nmaps = bpages;
-		(void)memset(&hashp->mapp[0], 0, bpages * sizeof(__uint32_t *));
-	}
-
-	/* Initialize Buffer Manager */
-	if (info && info->cachesize)
-		__buf_init(hashp, info->cachesize);
-	else
-		__buf_init(hashp, DEF_BUFSIZE);
-
-	hashp->new_file = new_table;
-	hashp->save_file = file && (hashp->flags & O_RDWR);
-	hashp->cbucket = -1;
-	if (!(dbp = (DB *)malloc(sizeof(DB)))) {
-		save_errno = errno;
-		hdestroy(hashp);
-		errno = save_errno;
-		return (NULL);
-	}
-	dbp->internal = hashp;
-	dbp->close = hash_close;
-	dbp->del = hash_delete;
-	dbp->fd = hash_fd;
-	dbp->get = hash_get;
-	dbp->put = hash_put;
-	dbp->seq = hash_seq;
-	dbp->sync = hash_sync;
-	dbp->type = DB_HASH;
-
-#ifdef DEBUG
-	(void)fprintf(stderr,
-"%s\n%s%x\n%s%d\n%s%d\n%s%d\n%s%d\n%s%d\n%s%d\n%s%d\n%s%d\n%s%d\n%s%x\n%s%x\n%s%d\n%s%d\n",
-	    "init_htab:",
-	    "TABLE POINTER   ", hashp,
-	    "BUCKET SIZE     ", hashp->BSIZE,
-	    "BUCKET SHIFT    ", hashp->BSHIFT,
-	    "DIRECTORY SIZE  ", hashp->DSIZE,
-	    "SEGMENT SIZE    ", hashp->SGSIZE,
-	    "SEGMENT SHIFT   ", hashp->SSHIFT,
-	    "FILL FACTOR     ", hashp->FFACTOR,
-	    "MAX BUCKET      ", hashp->MAX_BUCKET,
-	    "OVFL POINT	     ", hashp->OVFL_POINT,
-	    "LAST FREED      ", hashp->LAST_FREED,
-	    "HIGH MASK       ", hashp->HIGH_MASK,
-	    "LOW  MASK       ", hashp->LOW_MASK,
-	    "NSEGS           ", hashp->nsegs,
-	    "NKEYS           ", hashp->NKEYS);
-#endif
-#ifdef HASH_STATISTICS
-	hash_overflows = hash_accesses = hash_collisions = hash_expansions = 0;
-#endif
-	return (dbp);
-
-error1:
-	if (hashp != NULL)
-		(void)close(hashp->fp);
-
-error0:
-	free(hashp);
-	errno = save_errno;
-	return (NULL);
-}
-
-static int
-hash_close(dbp)
-	DB *dbp;
-{
-	HTAB *hashp;
-	int retval;
-
-	if (!dbp)
-		return (ERROR);
-
-	hashp = (HTAB *)dbp->internal;
-	retval = hdestroy(hashp);
-	free(dbp);
-	return (retval);
-}
-
-static int
-hash_fd(dbp)
-	const DB *dbp;
-{
-	HTAB *hashp;
-
-	if (!dbp)
-		return (ERROR);
-
-	hashp = (HTAB *)dbp->internal;
-	if (hashp->fp == -1) {
-		errno = ENOENT;
-		return (-1);
-	}
-	return (hashp->fp);
-}
-
-/************************** LOCAL CREATION ROUTINES **********************/
-static HTAB *
-init_hash(hashp, file, info)
-	HTAB *hashp;
-	const char *file;
-	HASHINFO *info;
-{
-	struct stat statbuf;
-	int nelem;
-
-	nelem = 1;
-	hashp->NKEYS = 0;
-       hashp->LORDER = DB_BYTE_ORDER;
-	hashp->BSIZE = DEF_BUCKET_SIZE;
-	hashp->BSHIFT = DEF_BUCKET_SHIFT;
-	hashp->SGSIZE = DEF_SEGSIZE;
-	hashp->SSHIFT = DEF_SEGSIZE_SHIFT;
-	hashp->DSIZE = DEF_DIRSIZE;
-	hashp->FFACTOR = DEF_FFACTOR;
-	hashp->hash = __default_hash;
-	memset(hashp->SPARES, 0, sizeof(hashp->SPARES));
-	memset(hashp->BITMAPS, 0, sizeof (hashp->BITMAPS));
-
-	/* Fix bucket size to be optimal for file system */
-	if (file != NULL) {
-#ifdef __USE_INTERNAL_STAT64
-		if (stat64(file, &statbuf))
-#else
-		if (stat(file, &statbuf))
-#endif
-			return (NULL);
-		hashp->BSIZE = statbuf.st_blksize;
-		hashp->BSHIFT = __log2(hashp->BSIZE);
-	}
-
-	if (info) {
-		if (info->bsize) {
-			/* Round pagesize up to power of 2 */
-			hashp->BSHIFT = __log2(info->bsize);
-			hashp->BSIZE = 1 << hashp->BSHIFT;
-			if (hashp->BSIZE > MAX_BSIZE) {
-				errno = EINVAL;
-				return (NULL);
-			}
-		}
-		if (info->ffactor)
-			hashp->FFACTOR = info->ffactor;
-		if (info->hash)
-			hashp->hash = info->hash;
-		if (info->nelem)
-			nelem = info->nelem;
-		if (info->lorder) {
-                       if (info->lorder != DB_BIG_ENDIAN &&
-                           info->lorder != DB_LITTLE_ENDIAN) {
-				errno = EINVAL;
-				return (NULL);
-			}
-			hashp->LORDER = info->lorder;
-		}
-	}
-	/* init_htab should destroy the table and set errno if it fails */
-	if (init_htab(hashp, nelem))
-		return (NULL);
-	else
-		return (hashp);
-}
-/*
- * This calls alloc_segs which may run out of memory.  Alloc_segs will destroy
- * the table and set errno, so we just pass the error information along.
- *
- * Returns 0 on No Error
- */
-static int
-init_htab(hashp, nelem)
-	HTAB *hashp;
-	int nelem;
-{
-	int nbuckets, nsegs;
-	int l2;
-
-	/*
-	 * Divide number of elements by the fill factor and determine a
-	 * desired number of buckets.  Allocate space for the next greater
-	 * power of two number of buckets.
-	 */
-	nelem = (nelem - 1) / hashp->FFACTOR + 1;
-
-	l2 = __log2(MAX(nelem, 2));
-	nbuckets = 1 << l2;
-
-	hashp->SPARES[l2] = l2 + 1;
-	hashp->SPARES[l2 + 1] = l2 + 1;
-	hashp->OVFL_POINT = l2;
-	hashp->LAST_FREED = 2;
-
-	/* First bitmap page is at: splitpoint l2 page offset 1 */
-	if (__ibitmap(hashp, OADDR_OF(l2, 1), l2 + 1, 0))
-		return (-1);
-
-	hashp->MAX_BUCKET = hashp->LOW_MASK = nbuckets - 1;
-	hashp->HIGH_MASK = (nbuckets << 1) - 1;
-	hashp->HDRPAGES = ((MAX(sizeof(HASHHDR), MINHDRSIZE) - 1) >>
-	    hashp->BSHIFT) + 1;
-
-	nsegs = (nbuckets - 1) / hashp->SGSIZE + 1;
-	nsegs = 1 << __log2(nsegs);
-
-	if (nsegs > hashp->DSIZE)
-		hashp->DSIZE = nsegs;
-	return (alloc_segs(hashp, nsegs));
-}
-
-/********************** DESTROY/CLOSE ROUTINES ************************/
-
-/*
- * Flushes any changes to the file if necessary and destroys the hashp
- * structure, freeing all allocated space.
- */
-static int
-hdestroy(hashp)
-	HTAB *hashp;
-{
-	int i, save_errno;
-
-	save_errno = 0;
-
-#ifdef HASH_STATISTICS
-	(void)fprintf(stderr, "hdestroy: accesses %ld collisions %ld\n",
-	    hash_accesses, hash_collisions);
-	(void)fprintf(stderr, "hdestroy: expansions %ld\n",
-	    hash_expansions);
-	(void)fprintf(stderr, "hdestroy: overflows %ld\n",
-	    hash_overflows);
-	(void)fprintf(stderr, "keys %ld maxp %d segmentcount %d\n",
-	    hashp->NKEYS, hashp->MAX_BUCKET, hashp->nsegs);
-
-	for (i = 0; i < NCACHED; i++)
-		(void)fprintf(stderr,
-		    "spares[%d] = %d\n", i, hashp->SPARES[i]);
-#endif
-	/*
-	 * Call on buffer manager to free buffers, and if required,
-	 * write them to disk.
-	 */
-	if (__buf_free(hashp, 1, hashp->save_file))
-		save_errno = errno;
-	if (hashp->dir) {
-		free(*hashp->dir);	/* Free initial segments */
-		/* Free extra segments */
-		while (hashp->exsegs--)
-			free(hashp->dir[--hashp->nsegs]);
-		free(hashp->dir);
-	}
-	if (flush_meta(hashp) && !save_errno)
-		save_errno = errno;
-	/* Free Bigmaps */
-	for (i = 0; i < hashp->nmaps; i++)
-		if (hashp->mapp[i])
-			free(hashp->mapp[i]);
-
-	if (hashp->fp != -1)
-		(void)close(hashp->fp);
-
-	free(hashp);
-
-	if (save_errno) {
-		errno = save_errno;
-		return (ERROR);
-	}
-	return (SUCCESS);
-}
-/*
- * Write modified pages to disk
- *
- * Returns:
- *	 0 == OK
- *	-1 ERROR
- */
-static int
-hash_sync(dbp, flags)
-	const DB *dbp;
-	__uint32_t flags;
-{
-	HTAB *hashp;
-
-	if (flags != 0) {
-		errno = EINVAL;
-		return (ERROR);
-	}
-
-	if (!dbp)
-		return (ERROR);
-
-	hashp = (HTAB *)dbp->internal;
-	if (!hashp->save_file)
-		return (0);
-	if (__buf_free(hashp, 0, 1) || flush_meta(hashp))
-		return (ERROR);
-	hashp->new_file = 0;
-	return (0);
-}
-
-/*
- * Returns:
- *	 0 == OK
- *	-1 indicates that errno should be set
- */
-static int
-flush_meta(hashp)
-	HTAB *hashp;
-{
-	HASHHDR *whdrp;
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-	HASHHDR whdr;
-#endif
-	int fp, i, wsize;
-
-	if (!hashp->save_file)
-		return (0);
-	hashp->MAGIC = HASHMAGIC;
-	hashp->HASH_VERSION = HASHVERSION;
-	hashp->H_CHARKEY = hashp->hash(CHARKEY, sizeof(CHARKEY));
-
-	fp = hashp->fp;
-	whdrp = &hashp->hdr;
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-	whdrp = &whdr;
-	swap_header_copy(&hashp->hdr, whdrp);
-#endif
-	if ((lseek(fp, (off_t)0, SEEK_SET) == -1) ||
-	    ((wsize = write(fp, whdrp, sizeof(HASHHDR))) == -1))
-		return (-1);
-	else
-		if (wsize != sizeof(HASHHDR)) {
-			errno = EFTYPE;
-			hashp->error = errno;
-			return (-1);
-		}
-	for (i = 0; i < NCACHED; i++)
-		if (hashp->mapp[i])
-			if (__put_page(hashp, (char *)hashp->mapp[i],
-				hashp->BITMAPS[i], 0, 1))
-				return (-1);
-	return (0);
-}
-
-/*******************************SEARCH ROUTINES *****************************/
-/*
- * All the access routines return
- *
- * Returns:
- *	 0 on SUCCESS
- *	 1 to indicate an external ERROR (i.e. key not found, etc)
- *	-1 to indicate an internal ERROR (i.e. out of memory, etc)
- */
-static int
-hash_get(dbp, key, data, flag)
-	const DB *dbp;
-	const DBT *key;
-	DBT *data;
-	__uint32_t flag;
-{
-	HTAB *hashp;
-
-	hashp = (HTAB *)dbp->internal;
-	if (flag) {
-		hashp->error = errno = EINVAL;
-		return (ERROR);
-	}
-	return (hash_access(hashp, HASH_GET, (DBT *)key, data));
-}
-
-static int
-hash_put(dbp, key, data, flag)
-	const DB *dbp;
-	DBT *key;
-	const DBT *data;
-	__uint32_t flag;
-{
-	HTAB *hashp;
-
-	hashp = (HTAB *)dbp->internal;
-	if (flag && flag != R_NOOVERWRITE) {
-		hashp->error = EINVAL;
-		errno = EINVAL;
-		return (ERROR);
-	}
-	if ((hashp->flags & O_ACCMODE) == O_RDONLY) {
-		hashp->error = errno = EPERM;
-		return (ERROR);
-	}
-	return (hash_access(hashp, flag == R_NOOVERWRITE ?
-	    HASH_PUTNEW : HASH_PUT, (DBT *)key, (DBT *)data));
-}
-
-static int
-hash_delete(dbp, key, flag)
-	const DB *dbp;
-	const DBT *key;
-	__uint32_t flag;		/* Ignored */
-{
-	HTAB *hashp;
-
-	hashp = (HTAB *)dbp->internal;
-	if (flag && flag != R_CURSOR) {
-		hashp->error = errno = EINVAL;
-		return (ERROR);
-	}
-	if ((hashp->flags & O_ACCMODE) == O_RDONLY) {
-		hashp->error = errno = EPERM;
-		return (ERROR);
-	}
-	return (hash_access(hashp, HASH_DELETE, (DBT *)key, NULL));
-}
-
-/*
- * Assume that hashp has been set in wrapper routine.
- */
-static int
-hash_access(hashp, action, key, val)
-	HTAB *hashp;
-	ACTION action;
-	DBT *key, *val;
-{
-	BUFHEAD *rbufp;
-	BUFHEAD *bufp, *save_bufp;
-	__uint16_t *bp;
-	int n, ndx, off, size;
-	char *kp;
-	__uint16_t pageno;
-
-#ifdef HASH_STATISTICS
-	hash_accesses++;
-#endif
-
-	off = hashp->BSIZE;
-	size = key->size;
-	kp = (char *)key->data;
-	rbufp = __get_buf(hashp, __call_hash(hashp, kp, size), NULL, 0);
-	if (!rbufp)
-		return (ERROR);
-	save_bufp = rbufp;
-
-	/* Pin the bucket chain */
-	rbufp->flags |= BUF_PIN;
-	for (bp = (__uint16_t *)rbufp->page, n = *bp++, ndx = 1; ndx < n;)
-		if (bp[1] >= REAL_KEY) {
-			/* Real key/data pair */
-			if (size == off - *bp &&
-			    memcmp(kp, rbufp->page + *bp, size) == 0)
-				goto found;
-			off = bp[1];
-#ifdef HASH_STATISTICS
-			hash_collisions++;
-#endif
-			bp += 2;
-			ndx += 2;
-		} else if (bp[1] == OVFLPAGE) {
-			rbufp = __get_buf(hashp, *bp, rbufp, 0);
-			if (!rbufp) {
-				save_bufp->flags &= ~BUF_PIN;
-				return (ERROR);
-			}
-			/* FOR LOOP INIT */
-			bp = (__uint16_t *)rbufp->page;
-			n = *bp++;
-			ndx = 1;
-			off = hashp->BSIZE;
-		} else if (bp[1] < REAL_KEY) {
-			if ((ndx =
-			    __find_bigpair(hashp, rbufp, ndx, kp, size)) > 0)
-				goto found;
-			if (ndx == -2) {
-				bufp = rbufp;
-				if (!(pageno =
-				    __find_last_page(hashp, &bufp))) {
-					ndx = 0;
-					rbufp = bufp;
-					break;	/* FOR */
-				}
-				rbufp = __get_buf(hashp, pageno, bufp, 0);
-				if (!rbufp) {
-					save_bufp->flags &= ~BUF_PIN;
-					return (ERROR);
-				}
-				/* FOR LOOP INIT */
-				bp = (__uint16_t *)rbufp->page;
-				n = *bp++;
-				ndx = 1;
-				off = hashp->BSIZE;
-			} else {
-				save_bufp->flags &= ~BUF_PIN;
-				return (ERROR);
-			}
-		}
-
-	/* Not found */
-	switch (action) {
-	case HASH_PUT:
-	case HASH_PUTNEW:
-		if (__addel(hashp, rbufp, key, val)) {
-			save_bufp->flags &= ~BUF_PIN;
-			return (ERROR);
-		} else {
-			save_bufp->flags &= ~BUF_PIN;
-			return (SUCCESS);
-		}
-	case HASH_GET:
-	case HASH_DELETE:
-	default:
-		save_bufp->flags &= ~BUF_PIN;
-		return (ABNORMAL);
-	}
-
-found:
-	switch (action) {
-	case HASH_PUTNEW:
-		save_bufp->flags &= ~BUF_PIN;
-		return (ABNORMAL);
-	case HASH_GET:
-		bp = (__uint16_t *)rbufp->page;
-		if (bp[ndx + 1] < REAL_KEY) {
-			if (__big_return(hashp, rbufp, ndx, val, 0))
-				return (ERROR);
-		} else {
-			val->data = (u_char *)rbufp->page + (int)bp[ndx + 1];
-			val->size = bp[ndx] - bp[ndx + 1];
-		}
-		break;
-	case HASH_PUT:
-		if ((__delpair(hashp, rbufp, ndx)) ||
-		    (__addel(hashp, rbufp, key, val))) {
-			save_bufp->flags &= ~BUF_PIN;
-			return (ERROR);
-		}
-		break;
-	case HASH_DELETE:
-		if (__delpair(hashp, rbufp, ndx))
-			return (ERROR);
-		break;
-	default:
-		abort();
-	}
-	save_bufp->flags &= ~BUF_PIN;
-	return (SUCCESS);
-}
-
-static int
-hash_seq(dbp, key, data, flag)
-	const DB *dbp;
-	DBT *key, *data;
-	__uint32_t flag;
-{
-	__uint32_t bucket;
-	BUFHEAD *bufp;
-	HTAB *hashp;
-	__uint16_t *bp, ndx;
-
-	hashp = (HTAB *)dbp->internal;
-	if (flag && flag != R_FIRST && flag != R_NEXT) {
-		hashp->error = errno = EINVAL;
-		return (ERROR);
-	}
-#ifdef HASH_STATISTICS
-	hash_accesses++;
-#endif
-	if ((hashp->cbucket < 0) || (flag == R_FIRST)) {
-		hashp->cbucket = 0;
-		hashp->cndx = 1;
-		hashp->cpage = NULL;
-	}
-
-	for (bp = NULL; !bp || !bp[0]; ) {
-		if (!(bufp = hashp->cpage)) {
-			for (bucket = hashp->cbucket;
-			    bucket <= hashp->MAX_BUCKET;
-			    bucket++, hashp->cndx = 1) {
-				bufp = __get_buf(hashp, bucket, NULL, 0);
-				if (!bufp)
-					return (ERROR);
-				hashp->cpage = bufp;
-				bp = (__uint16_t *)bufp->page;
-				if (bp[0])
-					break;
-			}
-			hashp->cbucket = bucket;
-			if (hashp->cbucket > hashp->MAX_BUCKET) {
-				hashp->cbucket = -1;
-				return (ABNORMAL);
-			}
-		} else
-			bp = (__uint16_t *)hashp->cpage->page;
-
-#ifdef DEBUG
-		assert(bp);
-		assert(bufp);
-#endif
-		while (bp[hashp->cndx + 1] == OVFLPAGE) {
-			bufp = hashp->cpage =
-			    __get_buf(hashp, bp[hashp->cndx], bufp, 0);
-			if (!bufp)
-				return (ERROR);
-			bp = (__uint16_t *)(bufp->page);
-			hashp->cndx = 1;
-		}
-		if (!bp[0]) {
-			hashp->cpage = NULL;
-			++hashp->cbucket;
-		}
-	}
-	ndx = hashp->cndx;
-	if (bp[ndx + 1] < REAL_KEY) {
-		if (__big_keydata(hashp, bufp, key, data, 1))
-			return (ERROR);
-	} else {
-		key->data = (u_char *)hashp->cpage->page + bp[ndx];
-		key->size = (ndx > 1 ? bp[ndx - 1] : hashp->BSIZE) - bp[ndx];
-		data->data = (u_char *)hashp->cpage->page + bp[ndx + 1];
-		data->size = bp[ndx] - bp[ndx + 1];
-		ndx += 2;
-		if (ndx > bp[0]) {
-			hashp->cpage = NULL;
-			hashp->cbucket++;
-			hashp->cndx = 1;
-		} else
-			hashp->cndx = ndx;
-	}
-	return (SUCCESS);
-}
-
-/********************************* UTILITIES ************************/
-
-/*
- * Returns:
- *	 0 ==> OK
- *	-1 ==> Error
- */
-extern int
-__expand_table(hashp)
-	HTAB *hashp;
-{
-	__uint32_t old_bucket, new_bucket;
-	int dirsize, new_segnum, spare_ndx;
-
-#ifdef HASH_STATISTICS
-	hash_expansions++;
-#endif
-	new_bucket = ++hashp->MAX_BUCKET;
-	old_bucket = (hashp->MAX_BUCKET & hashp->LOW_MASK);
-
-	new_segnum = new_bucket >> hashp->SSHIFT;
-
-	/* Check if we need a new segment */
-	if (new_segnum >= hashp->nsegs) {
-		/* Check if we need to expand directory */
-		if (new_segnum >= hashp->DSIZE) {
-			/* Reallocate directory */
-			dirsize = hashp->DSIZE * sizeof(SEGMENT *);
-			if (!hash_realloc(&hashp->dir, dirsize, dirsize << 1))
-				return (-1);
-			hashp->DSIZE = dirsize << 1;
-		}
-		if ((hashp->dir[new_segnum] =
-		    (SEGMENT)calloc(hashp->SGSIZE, sizeof(SEGMENT))) == NULL)
-			return (-1);
-		hashp->exsegs++;
-		hashp->nsegs++;
-	}
-	/*
-	 * If the split point is increasing (MAX_BUCKET's log base 2
-	 * * increases), we need to copy the current contents of the spare
-	 * split bucket to the next bucket.
-	 */
-	spare_ndx = __log2(hashp->MAX_BUCKET + 1);
-	if (spare_ndx > hashp->OVFL_POINT) {
-		hashp->SPARES[spare_ndx] = hashp->SPARES[hashp->OVFL_POINT];
-		hashp->OVFL_POINT = spare_ndx;
-	}
-
-	if (new_bucket > hashp->HIGH_MASK) {
-		/* Starting a new doubling */
-		hashp->LOW_MASK = hashp->HIGH_MASK;
-		hashp->HIGH_MASK = new_bucket | hashp->LOW_MASK;
-	}
-	/* Relocate records to the new bucket */
-	return (__split_page(hashp, old_bucket, new_bucket));
-}
-
-/*
- * If realloc guarantees that the pointer is not destroyed if the realloc
- * fails, then this routine can go away.
- */
-static void *
-hash_realloc(p_ptr, oldsize, newsize)
-	SEGMENT **p_ptr;
-	int oldsize, newsize;
-{
-	void *p;
-
-	if ( (p = malloc(newsize)) ) {
-		memmove(p, *p_ptr, oldsize);
-		memset((char *)p + oldsize, 0, newsize - oldsize);
-		free(*p_ptr);
-		*p_ptr = p;
-	}
-	return (p);
-}
-
-extern __uint32_t
-__call_hash(hashp, k, len)
-	HTAB *hashp;
-	char *k;
-	int len;
-{
-	int n, bucket;
-
-	n = hashp->hash(k, len);
-	bucket = n & hashp->HIGH_MASK;
-	if (bucket > hashp->MAX_BUCKET)
-		bucket = bucket & hashp->LOW_MASK;
-	return (bucket);
-}
-
-/*
- * Allocate segment table.  On error, destroy the table and set errno.
- *
- * Returns 0 on success
- */
-static int
-alloc_segs(hashp, nsegs)
-	HTAB *hashp;
-	int nsegs;
-{
-	int i;
-	SEGMENT store;
-
-	int save_errno;
-
-	if ((hashp->dir =
-	    (SEGMENT *)calloc(hashp->DSIZE, sizeof(SEGMENT *))) == NULL) {
-		save_errno = errno;
-		(void)hdestroy(hashp);
-		errno = save_errno;
-		return (-1);
-	}
-	/* Allocate segments */
-	if ((store =
-	    (SEGMENT)calloc(nsegs << hashp->SSHIFT, sizeof(SEGMENT))) == NULL) {
-		save_errno = errno;
-		(void)hdestroy(hashp);
-		errno = save_errno;
-		return (-1);
-	}
-	for (i = 0; i < nsegs; i++, hashp->nsegs++)
-		hashp->dir[i] = &store[i << hashp->SSHIFT];
-	return (0);
-}
-
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-/*
- * Hashp->hdr needs to be byteswapped.
- */
-static void
-swap_header_copy(srcp, destp)
-	HASHHDR *srcp, *destp;
-{
-	int i;
-
-	P_32_COPY(srcp->magic, destp->magic);
-	P_32_COPY(srcp->version, destp->version);
-	P_32_COPY(srcp->lorder, destp->lorder);
-	P_32_COPY(srcp->bsize, destp->bsize);
-	P_32_COPY(srcp->bshift, destp->bshift);
-	P_32_COPY(srcp->dsize, destp->dsize);
-	P_32_COPY(srcp->ssize, destp->ssize);
-	P_32_COPY(srcp->sshift, destp->sshift);
-	P_32_COPY(srcp->ovfl_point, destp->ovfl_point);
-	P_32_COPY(srcp->last_freed, destp->last_freed);
-	P_32_COPY(srcp->max_bucket, destp->max_bucket);
-	P_32_COPY(srcp->high_mask, destp->high_mask);
-	P_32_COPY(srcp->low_mask, destp->low_mask);
-	P_32_COPY(srcp->ffactor, destp->ffactor);
-	P_32_COPY(srcp->nkeys, destp->nkeys);
-	P_32_COPY(srcp->hdrpages, destp->hdrpages);
-	P_32_COPY(srcp->h_charkey, destp->h_charkey);
-	for (i = 0; i < NCACHED; i++) {
-		P_32_COPY(srcp->spares[i], destp->spares[i]);
-		P_16_COPY(srcp->bitmaps[i], destp->bitmaps[i]);
-	}
-}
-
-static void
-swap_header(hashp)
-	HTAB *hashp;
-{
-	HASHHDR *hdrp;
-	int i;
-
-	hdrp = &hashp->hdr;
-
-	M_32_SWAP(hdrp->magic);
-	M_32_SWAP(hdrp->version);
-	M_32_SWAP(hdrp->lorder);
-	M_32_SWAP(hdrp->bsize);
-	M_32_SWAP(hdrp->bshift);
-	M_32_SWAP(hdrp->dsize);
-	M_32_SWAP(hdrp->ssize);
-	M_32_SWAP(hdrp->sshift);
-	M_32_SWAP(hdrp->ovfl_point);
-	M_32_SWAP(hdrp->last_freed);
-	M_32_SWAP(hdrp->max_bucket);
-	M_32_SWAP(hdrp->high_mask);
-	M_32_SWAP(hdrp->low_mask);
-	M_32_SWAP(hdrp->ffactor);
-	M_32_SWAP(hdrp->nkeys);
-	M_32_SWAP(hdrp->hdrpages);
-	M_32_SWAP(hdrp->h_charkey);
-	for (i = 0; i < NCACHED; i++) {
-		M_32_SWAP(hdrp->spares[i]);
-		M_16_SWAP(hdrp->bitmaps[i]);
-	}
-}
-#endif
diff --git a/newlib/libc/search/hash.h b/newlib/libc/search/hash.h
deleted file mode 100644
index db9e96dd8..000000000
--- a/newlib/libc/search/hash.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)hash.h	8.3 (Berkeley) 5/31/94
- * $FreeBSD: src/lib/libc/db/hash/hash.h,v 1.6 2002/03/21 22:46:26 obrien Exp $
- */
-
-#include <sys/param.h>
-
-/* Check that newlib understands the byte order of its target system.  */
-#ifndef BYTE_ORDER
-#error BYTE_ORDER not defined by sys/param.h
-#endif
-
-/* Define DB endianness constants based on target endianness.  */
-#define DB_LITTLE_ENDIAN 1234
-#define DB_BIG_ENDIAN 4321
-#if (BYTE_ORDER == LITTLE_ENDIAN)
-#define DB_BYTE_ORDER DB_LITTLE_ENDIAN
-#else
-#define DB_BYTE_ORDER DB_BIG_ENDIAN
-#endif
-
-/* Operations */
-typedef enum {
-	HASH_GET, HASH_PUT, HASH_PUTNEW, HASH_DELETE, HASH_FIRST, HASH_NEXT
-} ACTION;
-
-/* Buffer Management structures */
-typedef struct _bufhead BUFHEAD;
-
-struct _bufhead {
-	BUFHEAD		*prev;		/* LRU links */
-	BUFHEAD		*next;		/* LRU links */
-	BUFHEAD		*ovfl;		/* Overflow page buffer header */
-	__uint32_t	 addr;		/* Address of this page */
-	char		*page;		/* Actual page data */
-	char	 	flags;
-#define	BUF_MOD		0x0001
-#define BUF_DISK	0x0002
-#define	BUF_BUCKET	0x0004
-#define	BUF_PIN		0x0008
-};
-
-#define IS_BUCKET(X)	((X) & BUF_BUCKET)
-
-typedef BUFHEAD **SEGMENT;
-
-/* Hash Table Information */
-typedef struct hashhdr {		/* Disk resident portion */
-	int		magic;		/* Magic NO for hash tables */
-	int		version;	/* Version ID */
-	__uint32_t	lorder;		/* Byte Order */
-	int		bsize;		/* Bucket/Page Size */
-	int		bshift;		/* Bucket shift */
-	int		dsize;		/* Directory Size */
-	int		ssize;		/* Segment Size */
-	int		sshift;		/* Segment shift */
-	int		ovfl_point;	/* Where overflow pages are being 
-					 * allocated */
-	int		last_freed;	/* Last overflow page freed */
-	int		max_bucket;	/* ID of Maximum bucket in use */
-	int		high_mask;	/* Mask to modulo into entire table */
-	int		low_mask;	/* Mask to modulo into lower half of 
-					 * table */
-	int		ffactor;	/* Fill factor */
-	int		nkeys;		/* Number of keys in hash table */
-	int		hdrpages;	/* Size of table header */
-	int		h_charkey;	/* value of hash(CHARKEY) */
-#define NCACHED	32			/* number of bit maps and spare 
-					 * points */
-	int		spares[NCACHED];/* spare pages for overflow */
-	__uint16_t	bitmaps[NCACHED];	/* address of overflow page 
-						 * bitmaps */
-} HASHHDR;
-
-typedef struct htab	 {		/* Memory resident data structure */
-	HASHHDR 	hdr;		/* Header */
-	int		nsegs;		/* Number of allocated segments */
-	int		exsegs;		/* Number of extra allocated 
-					 * segments */
-	__uint32_t			/* Hash function */
-	    (*hash)(const void *, size_t);
-	int		flags;		/* Flag values */
-	int		fp;		/* File pointer */
-	char		*tmp_buf;	/* Temporary Buffer for BIG data */
-	char		*tmp_key;	/* Temporary Buffer for BIG keys */
-	BUFHEAD 	*cpage;		/* Current page */
-	int		cbucket;	/* Current bucket */
-	int		cndx;		/* Index of next item on cpage */
-	int		error;		/* Error Number -- for DBM 
-					 * compatibility */
-	int		new_file;	/* Indicates if fd is backing store 
-					 * or no */
-	int		save_file;	/* Indicates whether we need to flush 
-					 * file at
-					 * exit */
-	__uint32_t	*mapp[NCACHED];	/* Pointers to page maps */
-	int		nmaps;		/* Initial number of bitmaps */
-	int		nbufs;		/* Number of buffers left to 
-					 * allocate */
-	BUFHEAD 	bufhead;	/* Header of buffer lru list */
-	SEGMENT 	*dir;		/* Hash Bucket directory */
-} HTAB;
-
-/*
- * Constants
- */
-#define	MAX_BSIZE		65536		/* 2^16 */
-#define MIN_BUFFERS		6
-#define MINHDRSIZE		512
-#define DEF_BUFSIZE		65536		/* 64 K */
-#define DEF_BUCKET_SIZE		4096
-#define DEF_BUCKET_SHIFT	12		/* log2(BUCKET) */
-#define DEF_SEGSIZE		256
-#define DEF_SEGSIZE_SHIFT	8		/* log2(SEGSIZE)	 */
-#define DEF_DIRSIZE		256
-#define DEF_FFACTOR		65536
-#define MIN_FFACTOR		4
-#define SPLTMAX			8
-#define CHARKEY			"%$sniglet^&"
-#define NUMKEY			1038583
-#define BYTE_SHIFT		3
-#define INT_TO_BYTE		2
-#define INT_BYTE_SHIFT		5
-#define ALL_SET			((__uint32_t)0xFFFFFFFF)
-#define ALL_CLEAR		0
-
-#define PTROF(X)	((BUFHEAD *)((ptrdiff_t)(X)&~0x3))
-#define ISMOD(X)	((__uint32_t)(ptrdiff_t)(X)&0x1)
-#define DOMOD(X)	((X) = (char *)((ptrdiff_t)(X)|0x1))
-#define ISDISK(X)	((__uint32_t)(ptrdiff_t)(X)&0x2)
-#define DODISK(X)	((X) = (char *)((ptrdiff_t)(X)|0x2))
-
-#define BITS_PER_MAP	32
-
-/* Given the address of the beginning of a big map, clear/set the nth bit */
-#define CLRBIT(A, N)	((A)[(N)/BITS_PER_MAP] &= ~(1<<((N)%BITS_PER_MAP)))
-#define SETBIT(A, N)	((A)[(N)/BITS_PER_MAP] |= (1<<((N)%BITS_PER_MAP)))
-#define ISSET(A, N)	((A)[(N)/BITS_PER_MAP] & (1<<((N)%BITS_PER_MAP)))
-
-/* Overflow management */
-/*
- * Overflow page numbers are allocated per split point.  At each doubling of
- * the table, we can allocate extra pages.  So, an overflow page number has
- * the top 5 bits indicate which split point and the lower 11 bits indicate
- * which page at that split point is indicated (pages within split points are
- * numberered starting with 1).
- */
-
-#define SPLITSHIFT	11
-#define SPLITMASK	0x7FF
-#define SPLITNUM(N)	(((__uint32_t)(N)) >> SPLITSHIFT)
-#define OPAGENUM(N)	((N) & SPLITMASK)
-#define	OADDR_OF(S,O)	((__uint32_t)((__uint32_t)(S) << SPLITSHIFT) + (O))
-
-#define BUCKET_TO_PAGE(B) \
-	(B) + hashp->HDRPAGES + ((B) ? hashp->SPARES[__log2((B)+1)-1] : 0)
-#define OADDR_TO_PAGE(B) 	\
-	BUCKET_TO_PAGE ( (1 << SPLITNUM((B))) -1 ) + OPAGENUM((B));
-
-/*
- * page.h contains a detailed description of the page format.
- *
- * Normally, keys and data are accessed from offset tables in the top of
- * each page which point to the beginning of the key and data.  There are
- * four flag values which may be stored in these offset tables which indicate
- * the following:
- *
- *
- * OVFLPAGE	Rather than a key data pair, this pair contains
- *		the address of an overflow page.  The format of
- *		the pair is:
- *		    OVERFLOW_PAGE_NUMBER OVFLPAGE
- *
- * PARTIAL_KEY	This must be the first key/data pair on a page
- *		and implies that page contains only a partial key.
- *		That is, the key is too big to fit on a single page
- *		so it starts on this page and continues on the next.
- *		The format of the page is:
- *		    KEY_OFF PARTIAL_KEY OVFL_PAGENO OVFLPAGE
- *
- *		    KEY_OFF -- offset of the beginning of the key
- *		    PARTIAL_KEY -- 1
- *		    OVFL_PAGENO - page number of the next overflow page
- *		    OVFLPAGE -- 0
- *
- * FULL_KEY	This must be the first key/data pair on the page.  It
- *		is used in two cases.
- *
- *		Case 1:
- *		    There is a complete key on the page but no data
- *		    (because it wouldn't fit).  The next page contains
- *		    the data.
- *
- *		    Page format it:
- *		    KEY_OFF FULL_KEY OVFL_PAGENO OVFL_PAGE
- *
- *		    KEY_OFF -- offset of the beginning of the key
- *		    FULL_KEY -- 2
- *		    OVFL_PAGENO - page number of the next overflow page
- *		    OVFLPAGE -- 0
- *
- *		Case 2:
- *		    This page contains no key, but part of a large
- *		    data field, which is continued on the next page.
- *
- *		    Page format it:
- *		    DATA_OFF FULL_KEY OVFL_PAGENO OVFL_PAGE
- *
- *		    KEY_OFF -- offset of the beginning of the data on
- *				this page
- *		    FULL_KEY -- 2
- *		    OVFL_PAGENO - page number of the next overflow page
- *		    OVFLPAGE -- 0
- *
- * FULL_KEY_DATA
- *		This must be the first key/data pair on the page.
- *		There are two cases:
- *
- *		Case 1:
- *		    This page contains a key and the beginning of the
- *		    data field, but the data field is continued on the
- *		    next page.
- *
- *		    Page format is:
- *		    KEY_OFF FULL_KEY_DATA OVFL_PAGENO DATA_OFF
- *
- *		    KEY_OFF -- offset of the beginning of the key
- *		    FULL_KEY_DATA -- 3
- *		    OVFL_PAGENO - page number of the next overflow page
- *		    DATA_OFF -- offset of the beginning of the data
- *
- *		Case 2:
- *		    This page contains the last page of a big data pair.
- *		    There is no key, only the  tail end of the data
- *		    on this page.
- *
- *		    Page format is:
- *		    DATA_OFF FULL_KEY_DATA <OVFL_PAGENO> <OVFLPAGE>
- *
- *		    DATA_OFF -- offset of the beginning of the data on
- *				this page
- *		    FULL_KEY_DATA -- 3
- *		    OVFL_PAGENO - page number of the next overflow page
- *		    OVFLPAGE -- 0
- *
- *		    OVFL_PAGENO and OVFLPAGE are optional (they are
- *		    not present if there is no next page).
- */
-
-#define OVFLPAGE	0
-#define PARTIAL_KEY	1
-#define FULL_KEY	2
-#define FULL_KEY_DATA	3
-#define	REAL_KEY	4
-
-/* Short hands for accessing structure */
-#define BSIZE		hdr.bsize
-#define BSHIFT		hdr.bshift
-#define DSIZE		hdr.dsize
-#define SGSIZE		hdr.ssize
-#define SSHIFT		hdr.sshift
-#define LORDER		hdr.lorder
-#define OVFL_POINT	hdr.ovfl_point
-#define	LAST_FREED	hdr.last_freed
-#define MAX_BUCKET	hdr.max_bucket
-#define FFACTOR		hdr.ffactor
-#define HIGH_MASK	hdr.high_mask
-#define LOW_MASK	hdr.low_mask
-#define NKEYS		hdr.nkeys
-#define HDRPAGES	hdr.hdrpages
-#define SPARES		hdr.spares
-#define BITMAPS		hdr.bitmaps
-#define HASH_VERSION	hdr.version
-#define MAGIC		hdr.magic
-#define NEXT_FREE	hdr.next_free
-#define H_CHARKEY	hdr.h_charkey
diff --git a/newlib/libc/search/hash_bigkey.c b/newlib/libc/search/hash_bigkey.c
deleted file mode 100644
index 821acd078..000000000
--- a/newlib/libc/search/hash_bigkey.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/param.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash_bigkey.c	8.3 (Berkeley) 5/31/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-/* Macros for min/max.  */
-#define MIN(a,b) (((a)<(b))?(a):(b))
-#define MAX(a,b) (((a)>(b))?(a):(b))
-
-/*
- * PACKAGE: hash
- * DESCRIPTION:
- *	Big key/data handling for the hashing package.
- *
- * ROUTINES:
- * External
- *	__big_keydata
- *	__big_split
- *	__big_insert
- *	__big_return
- *	__big_delete
- *	__find_last_page
- * Internal
- *	collect_key
- *	collect_data
- */
-
-#include <sys/param.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef DEBUG
-#include <assert.h>
-#endif
-
-#include "db_local.h"
-#include "hash.h"
-#include "page.h"
-#include "extern.h"
-
-static int collect_key(HTAB *, BUFHEAD *, int, DBT *, int);
-static int collect_data(HTAB *, BUFHEAD *, int, int);
-
-/*
- * Big_insert
- *
- * You need to do an insert and the key/data pair is too big
- *
- * Returns:
- * 0 ==> OK
- *-1 ==> ERROR
- */
-extern int
-__big_insert(hashp, bufp, key, val)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	const DBT *key, *val;
-{
-	__uint16_t *p;
-	int key_size, n, val_size;
-	__uint16_t space, move_bytes, off;
-	char *cp, *key_data, *val_data;
-
-	cp = bufp->page;		/* Character pointer of p. */
-	p = (__uint16_t *)cp;
-
-	key_data = (char *)key->data;
-	key_size = key->size;
-	val_data = (char *)val->data;
-	val_size = val->size;
-
-	/* First move the Key */
-	for (space = FREESPACE(p) - BIGOVERHEAD; key_size;
-	    space = FREESPACE(p) - BIGOVERHEAD) {
-		move_bytes = MIN(space, key_size);
-		off = OFFSET(p) - move_bytes;
-		memmove(cp + off, key_data, move_bytes);
-		key_size -= move_bytes;
-		key_data += move_bytes;
-		n = p[0];
-		p[++n] = off;
-		p[0] = ++n;
-		FREESPACE(p) = off - PAGE_META(n);
-		OFFSET(p) = off;
-		p[n] = PARTIAL_KEY;
-		bufp = __add_ovflpage(hashp, bufp);
-		if (!bufp)
-			return (-1);
-		n = p[0];
-		if (!key_size)
-			if (FREESPACE(p)) {
-				move_bytes = MIN(FREESPACE(p), val_size);
-				off = OFFSET(p) - move_bytes;
-				p[n] = off;
-				memmove(cp + off, val_data, move_bytes);
-				val_data += move_bytes;
-				val_size -= move_bytes;
-				p[n - 2] = FULL_KEY_DATA;
-				FREESPACE(p) = FREESPACE(p) - move_bytes;
-				OFFSET(p) = off;
-			} else
-				p[n - 2] = FULL_KEY;
-		p = (__uint16_t *)bufp->page;
-		cp = bufp->page;
-		bufp->flags |= BUF_MOD;
-	}
-
-	/* Now move the data */
-	for (space = FREESPACE(p) - BIGOVERHEAD; val_size;
-	    space = FREESPACE(p) - BIGOVERHEAD) {
-		move_bytes = MIN(space, val_size);
-		/*
-		 * Here's the hack to make sure that if the data ends on the
-		 * same page as the key ends, FREESPACE is at least one.
-		 */
-		if (space == val_size && val_size == val->size)
-			move_bytes--;
-		off = OFFSET(p) - move_bytes;
-		memmove(cp + off, val_data, move_bytes);
-		val_size -= move_bytes;
-		val_data += move_bytes;
-		n = p[0];
-		p[++n] = off;
-		p[0] = ++n;
-		FREESPACE(p) = off - PAGE_META(n);
-		OFFSET(p) = off;
-		if (val_size) {
-			p[n] = FULL_KEY;
-			bufp = __add_ovflpage(hashp, bufp);
-			if (!bufp)
-				return (-1);
-			cp = bufp->page;
-			p = (__uint16_t *)cp;
-		} else
-			p[n] = FULL_KEY_DATA;
-		bufp->flags |= BUF_MOD;
-	}
-	return (0);
-}
-
-/*
- * Called when bufp's page  contains a partial key (index should be 1)
- *
- * All pages in the big key/data pair except bufp are freed.  We cannot
- * free bufp because the page pointing to it is lost and we can't get rid
- * of its pointer.
- *
- * Returns:
- * 0 => OK
- *-1 => ERROR
- */
-extern int
-__big_delete(hashp, bufp)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-{
-	BUFHEAD *last_bfp, *rbufp;
-	__uint16_t *bp, pageno;
-	int key_done, n;
-
-	rbufp = bufp;
-	last_bfp = NULL;
-	bp = (__uint16_t *)bufp->page;
-	pageno = 0;
-	key_done = 0;
-
-	while (!key_done || (bp[2] != FULL_KEY_DATA)) {
-		if (bp[2] == FULL_KEY || bp[2] == FULL_KEY_DATA)
-			key_done = 1;
-
-		/*
-		 * If there is freespace left on a FULL_KEY_DATA page, then
-		 * the data is short and fits entirely on this page, and this
-		 * is the last page.
-		 */
-		if (bp[2] == FULL_KEY_DATA && FREESPACE(bp))
-			break;
-		pageno = bp[bp[0] - 1];
-		rbufp->flags |= BUF_MOD;
-		rbufp = __get_buf(hashp, pageno, rbufp, 0);
-		if (last_bfp)
-			__free_ovflpage(hashp, last_bfp);
-		last_bfp = rbufp;
-		if (!rbufp)
-			return (-1);		/* Error. */
-		bp = (__uint16_t *)rbufp->page;
-	}
-
-	/*
-	 * If we get here then rbufp points to the last page of the big
-	 * key/data pair.  Bufp points to the first one -- it should now be
-	 * empty pointing to the next page after this pair.  Can't free it
-	 * because we don't have the page pointing to it.
-	 */
-
-	/* This is information from the last page of the pair. */
-	n = bp[0];
-	pageno = bp[n - 1];
-
-	/* Now, bp is the first page of the pair. */
-	bp = (__uint16_t *)bufp->page;
-	if (n > 2) {
-		/* There is an overflow page. */
-		bp[1] = pageno;
-		bp[2] = OVFLPAGE;
-		bufp->ovfl = rbufp->ovfl;
-	} else
-		/* This is the last page. */
-		bufp->ovfl = NULL;
-	n -= 2;
-	bp[0] = n;
-	FREESPACE(bp) = hashp->BSIZE - PAGE_META(n);
-	OFFSET(bp) = hashp->BSIZE - 1;
-
-	bufp->flags |= BUF_MOD;
-	if (rbufp)
-		__free_ovflpage(hashp, rbufp);
-	if (last_bfp != rbufp)
-		__free_ovflpage(hashp, last_bfp);
-
-	hashp->NKEYS--;
-	return (0);
-}
-/*
- * Returns:
- *  0 = key not found
- * -1 = get next overflow page
- * -2 means key not found and this is big key/data
- * -3 error
- */
-extern int
-__find_bigpair(hashp, bufp, ndx, key, size)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	int ndx;
-	char *key;
-	int size;
-{
-	__uint16_t *bp;
-	char *p;
-	int ksize;
-	__uint16_t bytes;
-	char *kkey;
-
-	bp = (__uint16_t *)bufp->page;
-	p = bufp->page;
-	ksize = size;
-	kkey = key;
-
-	for (bytes = hashp->BSIZE - bp[ndx];
-	    bytes <= size && bp[ndx + 1] == PARTIAL_KEY;
-	    bytes = hashp->BSIZE - bp[ndx]) {
-		if (memcmp(p + bp[ndx], kkey, bytes))
-			return (-2);
-		kkey += bytes;
-		ksize -= bytes;
-		bufp = __get_buf(hashp, bp[ndx + 2], bufp, 0);
-		if (!bufp)
-			return (-3);
-		p = bufp->page;
-		bp = (__uint16_t *)p;
-		ndx = 1;
-	}
-
-	if (bytes != ksize || memcmp(p + bp[ndx], kkey, bytes)) {
-#ifdef HASH_STATISTICS
-		++hash_collisions;
-#endif
-		return (-2);
-	} else
-		return (ndx);
-}
-
-/*
- * Given the buffer pointer of the first overflow page of a big pair,
- * find the end of the big pair
- *
- * This will set bpp to the buffer header of the last page of the big pair.
- * It will return the pageno of the overflow page following the last page
- * of the pair; 0 if there isn't any (i.e. big pair is the last key in the
- * bucket)
- */
-extern __uint16_t
-__find_last_page(hashp, bpp)
-	HTAB *hashp;
-	BUFHEAD **bpp;
-{
-	BUFHEAD *bufp;
-	__uint16_t *bp, pageno;
-	int n;
-
-	bufp = *bpp;
-	bp = (__uint16_t *)bufp->page;
-	for (;;) {
-		n = bp[0];
-
-		/*
-		 * This is the last page if: the tag is FULL_KEY_DATA and
-		 * either only 2 entries OVFLPAGE marker is explicit there
-		 * is freespace on the page.
-		 */
-		if (bp[2] == FULL_KEY_DATA &&
-		    ((n == 2) || (bp[n] == OVFLPAGE) || (FREESPACE(bp))))
-			break;
-
-		pageno = bp[n - 1];
-		bufp = __get_buf(hashp, pageno, bufp, 0);
-		if (!bufp)
-			return (0);	/* Need to indicate an error! */
-		bp = (__uint16_t *)bufp->page;
-	}
-
-	*bpp = bufp;
-	if (bp[0] > 2)
-		return (bp[3]);
-	else
-		return (0);
-}
-
-/*
- * Return the data for the key/data pair that begins on this page at this
- * index (index should always be 1).
- */
-extern int
-__big_return(hashp, bufp, ndx, val, set_current)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	int ndx;
-	DBT *val;
-	int set_current;
-{
-	BUFHEAD *save_p;
-	__uint16_t *bp, len, off, save_addr;
-	char *tp;
-
-	bp = (__uint16_t *)bufp->page;
-	while (bp[ndx + 1] == PARTIAL_KEY) {
-		bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-		if (!bufp)
-			return (-1);
-		bp = (__uint16_t *)bufp->page;
-		ndx = 1;
-	}
-
-	if (bp[ndx + 1] == FULL_KEY) {
-		bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-		if (!bufp)
-			return (-1);
-		bp = (__uint16_t *)bufp->page;
-		save_p = bufp;
-		save_addr = save_p->addr;
-		off = bp[1];
-		len = 0;
-	} else
-		if (!FREESPACE(bp)) {
-			/*
-			 * This is a hack.  We can't distinguish between
-			 * FULL_KEY_DATA that contains complete data or
-			 * incomplete data, so we require that if the data
-			 * is complete, there is at least 1 byte of free
-			 * space left.
-			 */
-			off = bp[bp[0]];
-			len = bp[1] - off;
-			save_p = bufp;
-			save_addr = bufp->addr;
-			bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-			if (!bufp)
-				return (-1);
-			bp = (__uint16_t *)bufp->page;
-		} else {
-			/* The data is all on one page. */
-			tp = (char *)bp;
-			off = bp[bp[0]];
-			val->data = (u_char *)tp + off;
-			val->size = bp[1] - off;
-			if (set_current) {
-				if (bp[0] == 2) {	/* No more buckets in
-							 * chain */
-					hashp->cpage = NULL;
-					hashp->cbucket++;
-					hashp->cndx = 1;
-				} else {
-					hashp->cpage = __get_buf(hashp,
-					    bp[bp[0] - 1], bufp, 0);
-					if (!hashp->cpage)
-						return (-1);
-					hashp->cndx = 1;
-					if (!((__uint16_t *)
-					    hashp->cpage->page)[0]) {
-						hashp->cbucket++;
-						hashp->cpage = NULL;
-					}
-				}
-			}
-			return (0);
-		}
-
-	val->size = collect_data(hashp, bufp, (int)len, set_current);
-	if (val->size == -1)
-		return (-1);
-	if (save_p->addr != save_addr) {
-		/* We are pretty short on buffers. */
-		errno = EINVAL;			/* OUT OF BUFFERS */
-		return (-1);
-	}
-	memmove(hashp->tmp_buf, (save_p->page) + off, len);
-	val->data = (u_char *)hashp->tmp_buf;
-	return (0);
-}
-/*
- * Count how big the total datasize is by recursing through the pages.  Then
- * allocate a buffer and copy the data as you recurse up.
- */
-static int
-collect_data(hashp, bufp, len, set)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	int len, set;
-{
-	__uint16_t *bp;
-	char *p;
-	BUFHEAD *xbp;
-	__uint16_t save_addr;
-	int mylen, totlen;
-
-	p = bufp->page;
-	bp = (__uint16_t *)p;
-	mylen = hashp->BSIZE - bp[1];
-	save_addr = bufp->addr;
-
-	if (bp[2] == FULL_KEY_DATA) {		/* End of Data */
-		totlen = len + mylen;
-		if (hashp->tmp_buf)
-			free(hashp->tmp_buf);
-		if ((hashp->tmp_buf = (char *)malloc(totlen)) == NULL)
-			return (-1);
-		if (set) {
-			hashp->cndx = 1;
-			if (bp[0] == 2) {	/* No more buckets in chain */
-				hashp->cpage = NULL;
-				hashp->cbucket++;
-			} else {
-				hashp->cpage =
-				    __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-				if (!hashp->cpage)
-					return (-1);
-				else if (!((__uint16_t *)hashp->cpage->page)[0]) {
-					hashp->cbucket++;
-					hashp->cpage = NULL;
-				}
-			}
-		}
-	} else {
-		xbp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-		if (!xbp || ((totlen =
-		    collect_data(hashp, xbp, len + mylen, set)) < 1))
-			return (-1);
-	}
-	if (bufp->addr != save_addr) {
-		errno = EINVAL;			/* Out of buffers. */
-		return (-1);
-	}
-	memmove(&hashp->tmp_buf[len], (bufp->page) + bp[1], mylen);
-	return (totlen);
-}
-
-/*
- * Fill in the key and data for this big pair.
- */
-extern int
-__big_keydata(hashp, bufp, key, val, set)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	DBT *key, *val;
-	int set;
-{
-	key->size = collect_key(hashp, bufp, 0, val, set);
-	if (key->size == -1)
-		return (-1);
-	key->data = (u_char *)hashp->tmp_key;
-	return (0);
-}
-
-/*
- * Count how big the total key size is by recursing through the pages.  Then
- * collect the data, allocate a buffer and copy the key as you recurse up.
- */
-static int
-collect_key(hashp, bufp, len, val, set)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	int len;
-	DBT *val;
-	int set;
-{
-	BUFHEAD *xbp;
-	char *p;
-	int mylen, totlen;
-	__uint16_t *bp, save_addr;
-
-	p = bufp->page;
-	bp = (__uint16_t *)p;
-	mylen = hashp->BSIZE - bp[1];
-
-	save_addr = bufp->addr;
-	totlen = len + mylen;
-	if (bp[2] == FULL_KEY || bp[2] == FULL_KEY_DATA) {    /* End of Key. */
-		if (hashp->tmp_key != NULL)
-			free(hashp->tmp_key);
-		if ((hashp->tmp_key = (char *)malloc(totlen)) == NULL)
-			return (-1);
-		if (__big_return(hashp, bufp, 1, val, set))
-			return (-1);
-	} else {
-		xbp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-		if (!xbp || ((totlen =
-		    collect_key(hashp, xbp, totlen, val, set)) < 1))
-			return (-1);
-	}
-	if (bufp->addr != save_addr) {
-		errno = EINVAL;		/* MIS -- OUT OF BUFFERS */
-		return (-1);
-	}
-	memmove(&hashp->tmp_key[len], (bufp->page) + bp[1], mylen);
-	return (totlen);
-}
-
-/*
- * Returns:
- *  0 => OK
- * -1 => error
- */
-extern int
-__big_split(hashp, op, np, big_keyp, addr, obucket, ret)
-	HTAB *hashp;
-	BUFHEAD *op;	/* Pointer to where to put keys that go in old bucket */
-	BUFHEAD *np;	/* Pointer to new bucket page */
-			/* Pointer to first page containing the big key/data */
-	BUFHEAD *big_keyp;
-	int addr;	/* Address of big_keyp */
-	__uint32_t   obucket;/* Old Bucket */
-	SPLIT_RETURN *ret;
-{
-	BUFHEAD *tmpp;
-	__uint16_t *tp;
-	BUFHEAD *bp;
-	DBT key, val;
-	__uint32_t change;
-	__uint16_t free_space, n, off;
-
-	bp = big_keyp;
-
-	/* Now figure out where the big key/data goes */
-	if (__big_keydata(hashp, big_keyp, &key, &val, 0))
-		return (-1);
-	change = (__call_hash(hashp, key.data, key.size) != obucket);
-
-	if ( (ret->next_addr = __find_last_page(hashp, &big_keyp)) ) {
-		if (!(ret->nextp =
-		    __get_buf(hashp, ret->next_addr, big_keyp, 0)))
-			return (-1);;
-	} else
-		ret->nextp = NULL;
-
-	/* Now make one of np/op point to the big key/data pair */
-#ifdef DEBUG
-	assert(np->ovfl == NULL);
-#endif
-	if (change)
-		tmpp = np;
-	else
-		tmpp = op;
-
-	tmpp->flags |= BUF_MOD;
-#ifdef DEBUG1
-	(void)fprintf(stderr,
-	    "BIG_SPLIT: %d->ovfl was %d is now %d\n", tmpp->addr,
-	    (tmpp->ovfl ? tmpp->ovfl->addr : 0), (bp ? bp->addr : 0));
-#endif
-	tmpp->ovfl = bp;	/* one of op/np point to big_keyp */
-	tp = (__uint16_t *)tmpp->page;
-#ifdef DEBUG
-	assert(FREESPACE(tp) >= OVFLSIZE);
-#endif
-	n = tp[0];
-	off = OFFSET(tp);
-	free_space = FREESPACE(tp);
-	tp[++n] = (__uint16_t)addr;
-	tp[++n] = OVFLPAGE;
-	tp[0] = n;
-	OFFSET(tp) = off;
-	FREESPACE(tp) = free_space - OVFLSIZE;
-
-	/*
-	 * Finally, set the new and old return values. BIG_KEYP contains a
-	 * pointer to the last page of the big key_data pair. Make sure that
-	 * big_keyp has no following page (2 elements) or create an empty
-	 * following page.
-	 */
-
-	ret->newp = np;
-	ret->oldp = op;
-
-	tp = (__uint16_t *)big_keyp->page;
-	big_keyp->flags |= BUF_MOD;
-	if (tp[0] > 2) {
-		/*
-		 * There may be either one or two offsets on this page.  If
-		 * there is one, then the overflow page is linked on normally
-		 * and tp[4] is OVFLPAGE.  If there are two, tp[4] contains
-		 * the second offset and needs to get stuffed in after the
-		 * next overflow page is added.
-		 */
-		n = tp[4];
-		free_space = FREESPACE(tp);
-		off = OFFSET(tp);
-		tp[0] -= 2;
-		FREESPACE(tp) = free_space + OVFLSIZE;
-		OFFSET(tp) = off;
-		tmpp = __add_ovflpage(hashp, big_keyp);
-		if (!tmpp)
-			return (-1);
-		tp[4] = n;
-	} else
-		tmpp = big_keyp;
-
-	if (change)
-		ret->newp = tmpp;
-	else
-		ret->oldp = tmpp;
-	return (0);
-}
diff --git a/newlib/libc/search/hash_buf.c b/newlib/libc/search/hash_buf.c
deleted file mode 100644
index 3979bcdd5..000000000
--- a/newlib/libc/search/hash_buf.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/param.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash_buf.c	8.5 (Berkeley) 7/15/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-/*
- * PACKAGE: hash
- *
- * DESCRIPTION:
- *	Contains buffer management
- *
- * ROUTINES:
- * External
- *	__buf_init
- *	__get_buf
- *	__buf_free
- *	__reclaim_buf
- * Internal
- *	newbuf
- */
-
-#include <sys/param.h>
-
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-#ifdef DEBUG
-#include <assert.h>
-#endif
-
-#include "db_local.h"
-#include "hash.h"
-#include "page.h"
-#include "extern.h"
-
-static BUFHEAD *newbuf(HTAB *, __uint32_t, BUFHEAD *);
-
-/* Unlink B from its place in the lru */
-#define BUF_REMOVE(B) { \
-	(B)->prev->next = (B)->next; \
-	(B)->next->prev = (B)->prev; \
-}
-
-/* Insert B after P */
-#define BUF_INSERT(B, P) { \
-	(B)->next = (P)->next; \
-	(B)->prev = (P); \
-	(P)->next = (B); \
-	(B)->next->prev = (B); \
-}
-
-#define	MRU	hashp->bufhead.next
-#define	LRU	hashp->bufhead.prev
-
-#define MRU_INSERT(B)	BUF_INSERT((B), &hashp->bufhead)
-#define LRU_INSERT(B)	BUF_INSERT((B), LRU)
-
-/* Macros for min/max.  */
-#define MIN(a,b) (((a)<(b))?(a):(b))
-#define MAX(a,b) (((a)>(b))?(a):(b))
-
-/*
- * We are looking for a buffer with address "addr".  If prev_bp is NULL, then
- * address is a bucket index.  If prev_bp is not NULL, then it points to the
- * page previous to an overflow page that we are trying to find.
- *
- * CAVEAT:  The buffer header accessed via prev_bp's ovfl field may no longer
- * be valid.  Therefore, you must always verify that its address matches the
- * address you are seeking.
- */
-extern BUFHEAD *
-__get_buf(hashp, addr, prev_bp, newpage)
-	HTAB *hashp;
-	__uint32_t addr;
-	BUFHEAD *prev_bp;
-	int newpage;	/* If prev_bp set, indicates a new overflow page. */
-{
-	BUFHEAD *bp;
-	__uint32_t is_disk_mask;
-	int is_disk, segment_ndx;
-	SEGMENT segp;
-
-	is_disk = 0;
-	is_disk_mask = 0;
-	if (prev_bp) {
-		bp = prev_bp->ovfl;
-		if (!bp || (bp->addr != addr))
-			bp = NULL;
-		if (!newpage)
-			is_disk = BUF_DISK;
-	} else {
-		/* Grab buffer out of directory */
-		segment_ndx = addr & (hashp->SGSIZE - 1);
-
-		/* valid segment ensured by __call_hash() */
-		segp = hashp->dir[addr >> hashp->SSHIFT];
-#ifdef DEBUG
-		assert(segp != NULL);
-#endif
-		bp = PTROF(segp[segment_ndx]);
-		is_disk_mask = ISDISK(segp[segment_ndx]);
-		is_disk = is_disk_mask || !hashp->new_file;
-	}
-
-	if (!bp) {
-		bp = newbuf(hashp, addr, prev_bp);
-		if (!bp ||
-		    __get_page(hashp, bp->page, addr, !prev_bp, is_disk, 0))
-			return (NULL);
-		if (!prev_bp)
-			segp[segment_ndx] =
-			    (BUFHEAD *)((ptrdiff_t)bp | is_disk_mask);
-	} else {
-		BUF_REMOVE(bp);
-		MRU_INSERT(bp);
-	}
-	return (bp);
-}
-
-/*
- * We need a buffer for this page. Either allocate one, or evict a resident
- * one (if we have as many buffers as we're allowed) and put this one in.
- *
- * If newbuf finds an error (returning NULL), it also sets errno.
- */
-static BUFHEAD *
-newbuf(hashp, addr, prev_bp)
-	HTAB *hashp;
-	__uint32_t addr;
-	BUFHEAD *prev_bp;
-{
-	BUFHEAD *bp;		/* The buffer we're going to use */
-	BUFHEAD *xbp;		/* Temp pointer */
-	BUFHEAD *next_xbp;
-	SEGMENT segp;
-	int segment_ndx;
-	__uint16_t oaddr, *shortp;
-
-	oaddr = 0;
-	bp = LRU;
-	/*
-	 * If LRU buffer is pinned, the buffer pool is too small. We need to
-	 * allocate more buffers.
-	 */
-	if (hashp->nbufs || (bp->flags & BUF_PIN)) {
-		/* Allocate a new one */
-		if ((bp = (BUFHEAD *)malloc(sizeof(BUFHEAD))) == NULL)
-			return (NULL);
-#ifdef PURIFY
-		memset(bp, 0xff, sizeof(BUFHEAD));
-#endif
-		if ((bp->page = (char *)malloc(hashp->BSIZE)) == NULL) {
-			free(bp);
-			return (NULL);
-		}
-#ifdef PURIFY
-		memset(bp->page, 0xff, hashp->BSIZE);
-#endif
-		if (hashp->nbufs)
-			hashp->nbufs--;
-	} else {
-		/* Kick someone out */
-		BUF_REMOVE(bp);
-		/*
-		 * If this is an overflow page with addr 0, it's already been
-		 * flushed back in an overflow chain and initialized.
-		 */
-		if ((bp->addr != 0) || (bp->flags & BUF_BUCKET)) {
-			/*
-			 * Set oaddr before __put_page so that you get it
-			 * before bytes are swapped.
-			 */
-			shortp = (__uint16_t *)bp->page;
-			if (shortp[0])
-				oaddr = shortp[shortp[0] - 1];
-			if ((bp->flags & BUF_MOD) && __put_page(hashp, bp->page,
-			    bp->addr, (int)IS_BUCKET(bp->flags), 0))
-				return (NULL);
-			/*
-			 * Update the pointer to this page (i.e. invalidate it).
-			 *
-			 * If this is a new file (i.e. we created it at open
-			 * time), make sure that we mark pages which have been
-			 * written to disk so we retrieve them from disk later,
-			 * rather than allocating new pages.
-			 */
-			if (IS_BUCKET(bp->flags)) {
-				segment_ndx = bp->addr & (hashp->SGSIZE - 1);
-				segp = hashp->dir[bp->addr >> hashp->SSHIFT];
-#ifdef DEBUG
-				assert(segp != NULL);
-#endif
-
-				if (hashp->new_file &&
-				    ((bp->flags & BUF_MOD) ||
-				    ISDISK(segp[segment_ndx])))
-					segp[segment_ndx] = (BUFHEAD *)BUF_DISK;
-				else
-					segp[segment_ndx] = NULL;
-			}
-			/*
-			 * Since overflow pages can only be access by means of
-			 * their bucket, free overflow pages associated with
-			 * this bucket.
-			 */
-			for (xbp = bp; xbp->ovfl;) {
-				next_xbp = xbp->ovfl;
-				xbp->ovfl = 0;
-				xbp = next_xbp;
-
-				/* Check that ovfl pointer is up date. */
-				if (IS_BUCKET(xbp->flags) ||
-				    (oaddr != xbp->addr))
-					break;
-
-				shortp = (__uint16_t *)xbp->page;
-				if (shortp[0])
-					/* set before __put_page */
-					oaddr = shortp[shortp[0] - 1];
-				if ((xbp->flags & BUF_MOD) && __put_page(hashp,
-				    xbp->page, xbp->addr, 0, 0))
-					return (NULL);
-				xbp->addr = 0;
-				xbp->flags = 0;
-				BUF_REMOVE(xbp);
-				LRU_INSERT(xbp);
-			}
-		}
-	}
-
-	/* Now assign this buffer */
-	bp->addr = addr;
-#ifdef DEBUG1
-	(void)fprintf(stderr, "NEWBUF1: %d->ovfl was %d is now %d\n",
-	    bp->addr, (bp->ovfl ? bp->ovfl->addr : 0), 0);
-#endif
-	bp->ovfl = NULL;
-	if (prev_bp) {
-		/*
-		 * If prev_bp is set, this is an overflow page, hook it in to
-		 * the buffer overflow links.
-		 */
-#ifdef DEBUG1
-		(void)fprintf(stderr, "NEWBUF2: %d->ovfl was %d is now %d\n",
-		    prev_bp->addr, (prev_bp->ovfl ? bp->ovfl->addr : 0),
-		    (bp ? bp->addr : 0));
-#endif
-		prev_bp->ovfl = bp;
-		bp->flags = 0;
-	} else
-		bp->flags = BUF_BUCKET;
-	MRU_INSERT(bp);
-	return (bp);
-}
-
-extern void
-__buf_init(hashp, nbytes)
-	HTAB *hashp;
-	int nbytes;
-{
-	BUFHEAD *bfp;
-	int npages;
-
-	bfp = &(hashp->bufhead);
-	npages = (nbytes + hashp->BSIZE - 1) >> hashp->BSHIFT;
-	npages = MAX(npages, MIN_BUFFERS);
-
-	hashp->nbufs = npages;
-	bfp->next = bfp;
-	bfp->prev = bfp;
-	/*
-	 * This space is calloc'd so these are already null.
-	 *
-	 * bfp->ovfl = NULL;
-	 * bfp->flags = 0;
-	 * bfp->page = NULL;
-	 * bfp->addr = 0;
-	 */
-}
-
-extern int
-__buf_free(hashp, do_free, to_disk)
-	HTAB *hashp;
-	int do_free, to_disk;
-{
-	BUFHEAD *bp;
-
-	/* Need to make sure that buffer manager has been initialized */
-	if (!LRU)
-		return (0);
-	for (bp = LRU; bp != &hashp->bufhead;) {
-		/* Check that the buffer is valid */
-		if (bp->addr || IS_BUCKET(bp->flags)) {
-			if (to_disk && (bp->flags & BUF_MOD) &&
-			    __put_page(hashp, bp->page,
-			    bp->addr, IS_BUCKET(bp->flags), 0))
-				return (-1);
-		}
-		/* Check if we are freeing stuff */
-		if (do_free) {
-			if (bp->page)
-				free(bp->page);
-			BUF_REMOVE(bp);
-			free(bp);
-			bp = LRU;
-		} else
-			bp = bp->prev;
-	}
-	return (0);
-}
-
-extern void
-__reclaim_buf(hashp, bp)
-	HTAB *hashp;
-	BUFHEAD *bp;
-{
-	bp->ovfl = 0;
-	bp->addr = 0;
-	bp->flags = 0;
-	BUF_REMOVE(bp);
-	LRU_INSERT(bp);
-}
diff --git a/newlib/libc/search/hash_func.c b/newlib/libc/search/hash_func.c
deleted file mode 100644
index 52cb31ccb..000000000
--- a/newlib/libc/search/hash_func.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash_func.c	8.2 (Berkeley) 2/21/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include "db_local.h"
-#include "hash.h"
-#include "page.h"
-#include "extern.h"
-
-static __uint32_t hash1(const void *, size_t);
-static __uint32_t hash2(const void *, size_t);
-static __uint32_t hash3(const void *, size_t);
-static __uint32_t hash4(const void *, size_t);
-
-/* Global default hash function */
-__uint32_t (*__default_hash)(const void *, size_t) = hash4;
-
-/*
- * HASH FUNCTIONS
- *
- * Assume that we've already split the bucket to which this key hashes,
- * calculate that bucket, and check that in fact we did already split it.
- *
- * This came from ejb's hsearch.
- */
-
-#define PRIME1		37
-#define PRIME2		1048583
-
-static __uint32_t
-hash1(keyarg, len)
-	const void *keyarg;
-	size_t len;
-{
-	const u_char *key;
-	__uint32_t h;
-
-	/* Convert string to integer */
-	for (key = keyarg, h = 0; len--;)
-		h = h * PRIME1 ^ (*key++ - ' ');
-	h %= PRIME2;
-	return (h);
-}
-
-/*
- * Phong's linear congruential hash
- */
-#define dcharhash(h, c)	((h) = 0x63c63cd9*(h) + 0x9c39c33d + (c))
-
-static __uint32_t
-hash2(keyarg, len)
-	const void *keyarg;
-	size_t len;
-{
-	const u_char *e, *key;
-	__uint32_t h;
-	u_char c;
-
-	key = keyarg;
-	e = key + len;
-	for (h = 0; key != e;) {
-		c = *key++;
-		if (!c && key > e)
-			break;
-		dcharhash(h, c);
-	}
-	return (h);
-}
-
-/*
- * This is INCREDIBLY ugly, but fast.  We break the string up into 8 byte
- * units.  On the first time through the loop we get the "leftover bytes"
- * (strlen % 8).  On every other iteration, we perform 8 HASHC's so we handle
- * all 8 bytes.  Essentially, this saves us 7 cmp & branch instructions.  If
- * this routine is heavily used enough, it's worth the ugly coding.
- *
- * OZ's original sdbm hash
- */
-static __uint32_t
-hash3(keyarg, len)
-	const void *keyarg;
-	size_t len;
-{
-	const u_char *key;
-	size_t loop;
-	__uint32_t h;
-
-#define HASHC   h = *key++ + 65599 * h
-
-	h = 0;
-	key = keyarg;
-	if (len > 0) {
-		loop = (len + 8 - 1) >> 3;
-
-		switch (len & (8 - 1)) {
-		case 0:
-			do {
-				HASHC;
-				/* FALLTHROUGH */
-		case 7:
-				HASHC;
-				/* FALLTHROUGH */
-		case 6:
-				HASHC;
-				/* FALLTHROUGH */
-		case 5:
-				HASHC;
-				/* FALLTHROUGH */
-		case 4:
-				HASHC;
-				/* FALLTHROUGH */
-		case 3:
-				HASHC;
-				/* FALLTHROUGH */
-		case 2:
-				HASHC;
-				/* FALLTHROUGH */
-		case 1:
-				HASHC;
-			} while (--loop);
-		}
-	}
-	return (h);
-}
-
-/* Hash function from Chris Torek. */
-static __uint32_t
-hash4(keyarg, len)
-	const void *keyarg;
-	size_t len;
-{
-	const u_char *key;
-	size_t loop;
-	__uint32_t h;
-
-#define HASH4a   h = (h << 5) - h + *key++;
-#define HASH4b   h = (h << 5) + h + *key++;
-#define HASH4 HASH4b
-
-	h = 0;
-	key = keyarg;
-	if (len > 0) {
-		loop = (len + 8 - 1) >> 3;
-
-		switch (len & (8 - 1)) {
-		case 0:
-			do {
-				HASH4;
-				/* FALLTHROUGH */
-		case 7:
-				HASH4;
-				/* FALLTHROUGH */
-		case 6:
-				HASH4;
-				/* FALLTHROUGH */
-		case 5:
-				HASH4;
-				/* FALLTHROUGH */
-		case 4:
-				HASH4;
-				/* FALLTHROUGH */
-		case 3:
-				HASH4;
-				/* FALLTHROUGH */
-		case 2:
-				HASH4;
-				/* FALLTHROUGH */
-		case 1:
-				HASH4;
-			} while (--loop);
-		}
-	}
-	return (h);
-}
diff --git a/newlib/libc/search/hash_log2.c b/newlib/libc/search/hash_log2.c
deleted file mode 100644
index 9414f26c2..000000000
--- a/newlib/libc/search/hash_log2.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash_log2.c	8.2 (Berkeley) 5/31/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-
-#include "db_local.h"
-
-__uint32_t
-__log2(num)
-	__uint32_t num;
-{
-	__uint32_t i, limit;
-
-	limit = 1;
-	for (i = 0; limit < num; limit = limit << 1, i++);
-	return (i);
-}
diff --git a/newlib/libc/search/hash_page.c b/newlib/libc/search/hash_page.c
deleted file mode 100644
index 68ab9db17..000000000
--- a/newlib/libc/search/hash_page.c
+++ /dev/null
@@ -1,948 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/param.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)hash_page.c	8.7 (Berkeley) 8/16/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-/*
- * PACKAGE:  hashing
- *
- * DESCRIPTION:
- *	Page manipulation for hashing package.
- *
- * ROUTINES:
- *
- * External
- *	__get_page
- *	__add_ovflpage
- * Internal
- *	overflow_page
- *	open_temp
- */
-
-#include <sys/types.h>
-
-#include <errno.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#ifdef DEBUG
-#include <assert.h>
-#endif
-
-#include "db_local.h"
-#include "hash.h"
-#include "page.h"
-#include "extern.h"
-
-static __uint32_t	*fetch_bitmap(HTAB *, int);
-static __uint32_t	 first_free(__uint32_t);
-static int	 open_temp(HTAB *);
-static __uint16_t	 overflow_page(HTAB *);
-static void	 putpair(char *, const DBT *, const DBT *);
-static void	 squeeze_key(__uint16_t *, const DBT *, const DBT *);
-static int	 ugly_split
-(HTAB *, __uint32_t, BUFHEAD *, BUFHEAD *, int, int);
-
-#define	PAGE_INIT(P) { \
-	((__uint16_t *)(P))[0] = 0; \
-	((__uint16_t *)(P))[1] = hashp->BSIZE - 3 * sizeof(__uint16_t); \
-	((__uint16_t *)(P))[2] = hashp->BSIZE; \
-}
-
-/*
- * This is called AFTER we have verified that there is room on the page for
- * the pair (PAIRFITS has returned true) so we go right ahead and start moving
- * stuff on.
- */
-static void
-putpair(p, key, val)
-	char *p;
-	const DBT *key, *val;
-{
-	__uint16_t *bp, n, off;
-
-	bp = (__uint16_t *)p;
-
-	/* Enter the key first. */
-	n = bp[0];
-
-	off = OFFSET(bp) - key->size;
-	memmove(p + off, key->data, key->size);
-	bp[++n] = off;
-
-	/* Now the data. */
-	off -= val->size;
-	memmove(p + off, val->data, val->size);
-	bp[++n] = off;
-
-	/* Adjust page info. */
-	bp[0] = n;
-	bp[n + 1] = off - ((n + 3) * sizeof(__uint16_t));
-	bp[n + 2] = off;
-}
-
-/*
- * Returns:
- *	 0 OK
- *	-1 error
- */
-extern int
-__delpair(hashp, bufp, ndx)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	int ndx;
-{
-	__uint16_t *bp, newoff;
-	int n;
-	__uint16_t pairlen;
-
-	bp = (__uint16_t *)bufp->page;
-	n = bp[0];
-
-	if (bp[ndx + 1] < REAL_KEY)
-		return (__big_delete(hashp, bufp));
-	if (ndx != 1)
-		newoff = bp[ndx - 1];
-	else
-		newoff = hashp->BSIZE;
-	pairlen = newoff - bp[ndx + 1];
-
-	if (ndx != (n - 1)) {
-		/* Hard Case -- need to shuffle keys */
-		int i;
-		char *src = bufp->page + (int)OFFSET(bp);
-		char *dst = src + (int)pairlen;
-		memmove(dst, src, bp[ndx + 1] - OFFSET(bp));
-
-		/* Now adjust the pointers */
-		for (i = ndx + 2; i <= n; i += 2) {
-			if (bp[i + 1] == OVFLPAGE) {
-				bp[i - 2] = bp[i];
-				bp[i - 1] = bp[i + 1];
-			} else {
-				bp[i - 2] = bp[i] + pairlen;
-				bp[i - 1] = bp[i + 1] + pairlen;
-			}
-		}
-	}
-	/* Finally adjust the page data */
-	bp[n] = OFFSET(bp) + pairlen;
-	bp[n - 1] = bp[n + 1] + pairlen + 2 * sizeof(__uint16_t);
-	bp[0] = n - 2;
-	hashp->NKEYS--;
-
-	bufp->flags |= BUF_MOD;
-	return (0);
-}
-/*
- * Returns:
- *	 0 ==> OK
- *	-1 ==> Error
- */
-extern int
-__split_page(hashp, obucket, nbucket)
-	HTAB *hashp;
-	__uint32_t obucket, nbucket;
-{
-	BUFHEAD *new_bufp, *old_bufp;
-	__uint16_t *ino;
-	char *np;
-	DBT key, val;
-	int n, ndx, retval;
-	__uint16_t copyto, diff, off, moved;
-	char *op;
-
-	copyto = (__uint16_t)hashp->BSIZE;
-	off = (__uint16_t)hashp->BSIZE;
-	old_bufp = __get_buf(hashp, obucket, NULL, 0);
-	if (old_bufp == NULL)
-		return (-1);
-	new_bufp = __get_buf(hashp, nbucket, NULL, 0);
-	if (new_bufp == NULL)
-		return (-1);
-
-	old_bufp->flags |= (BUF_MOD | BUF_PIN);
-	new_bufp->flags |= (BUF_MOD | BUF_PIN);
-
-	ino = (__uint16_t *)(op = old_bufp->page);
-	np = new_bufp->page;
-
-	moved = 0;
-
-	for (n = 1, ndx = 1; n < ino[0]; n += 2) {
-		if (ino[n + 1] < REAL_KEY) {
-			retval = ugly_split(hashp, obucket, old_bufp, new_bufp,
-			    (int)copyto, (int)moved);
-			old_bufp->flags &= ~BUF_PIN;
-			new_bufp->flags &= ~BUF_PIN;
-			return (retval);
-
-		}
-		key.data = (u_char *)op + ino[n];
-		key.size = off - ino[n];
-
-		if (__call_hash(hashp, key.data, key.size) == obucket) {
-			/* Don't switch page */
-			diff = copyto - off;
-			if (diff) {
-				copyto = ino[n + 1] + diff;
-				memmove(op + copyto, op + ino[n + 1],
-				    off - ino[n + 1]);
-				ino[ndx] = copyto + ino[n] - ino[n + 1];
-				ino[ndx + 1] = copyto;
-			} else
-				copyto = ino[n + 1];
-			ndx += 2;
-		} else {
-			/* Switch page */
-			val.data = (u_char *)op + ino[n + 1];
-			val.size = ino[n] - ino[n + 1];
-			putpair(np, &key, &val);
-			moved += 2;
-		}
-
-		off = ino[n + 1];
-	}
-
-	/* Now clean up the page */
-	ino[0] -= moved;
-	FREESPACE(ino) = copyto - sizeof(__uint16_t) * (ino[0] + 3);
-	OFFSET(ino) = copyto;
-
-#ifdef DEBUG3
-	(void)fprintf(stderr, "split %d/%d\n",
-	    ((__uint16_t *)np)[0] / 2,
-	    ((__uint16_t *)op)[0] / 2);
-#endif
-	/* unpin both pages */
-	old_bufp->flags &= ~BUF_PIN;
-	new_bufp->flags &= ~BUF_PIN;
-	return (0);
-}
-
-/*
- * Called when we encounter an overflow or big key/data page during split
- * handling.  This is special cased since we have to begin checking whether
- * the key/data pairs fit on their respective pages and because we may need
- * overflow pages for both the old and new pages.
- *
- * The first page might be a page with regular key/data pairs in which case
- * we have a regular overflow condition and just need to go on to the next
- * page or it might be a big key/data pair in which case we need to fix the
- * big key/data pair.
- *
- * Returns:
- *	 0 ==> success
- *	-1 ==> failure
- */
-static int
-ugly_split(hashp, obucket, old_bufp, new_bufp, copyto, moved)
-	HTAB *hashp;
-	__uint32_t obucket;	/* Same as __split_page. */
-	BUFHEAD *old_bufp, *new_bufp;
-	int copyto;	/* First byte on page which contains key/data values. */
-	int moved;		/* Number of pairs moved to new page. */
-{
-	BUFHEAD *bufp;		/* Buffer header for ino */
-	__uint16_t *ino;		/* Page keys come off of */
-	__uint16_t *np;		/* New page */
-	__uint16_t *op;		/* Page keys go on to if they aren't moving */
-
-	BUFHEAD *last_bfp;	/* Last buf header OVFL needing to be freed */
-	DBT key, val;
-	SPLIT_RETURN ret;
-	__uint16_t n, off, ov_addr, scopyto;
-	char *cino;		/* Character value of ino */
-
-	bufp = old_bufp;
-	ino = (__uint16_t *)old_bufp->page;
-	np = (__uint16_t *)new_bufp->page;
-	op = (__uint16_t *)old_bufp->page;
-	last_bfp = NULL;
-	scopyto = (__uint16_t)copyto;	/* ANSI */
-
-	n = ino[0] - 1;
-	while (n < ino[0]) {
-		if (ino[2] < REAL_KEY && ino[2] != OVFLPAGE) {
-			if (__big_split(hashp, old_bufp,
-			    new_bufp, bufp, bufp->addr, obucket, &ret))
-				return (-1);
-			old_bufp = ret.oldp;
-			if (!old_bufp)
-				return (-1);
-			op = (__uint16_t *)old_bufp->page;
-			new_bufp = ret.newp;
-			if (!new_bufp)
-				return (-1);
-			np = (__uint16_t *)new_bufp->page;
-			bufp = ret.nextp;
-			if (!bufp)
-				return (0);
-			cino = (char *)bufp->page;
-			ino = (__uint16_t *)cino;
-			last_bfp = ret.nextp;
-		} else if (ino[n + 1] == OVFLPAGE) {
-			ov_addr = ino[n];
-			/*
-			 * Fix up the old page -- the extra 2 are the fields
-			 * which contained the overflow information.
-			 */
-			ino[0] -= (moved + 2);
-			FREESPACE(ino) =
-			    scopyto - sizeof(__uint16_t) * (ino[0] + 3);
-			OFFSET(ino) = scopyto;
-
-			bufp = __get_buf(hashp, ov_addr, bufp, 0);
-			if (!bufp)
-				return (-1);
-
-			ino = (__uint16_t *)bufp->page;
-			n = 1;
-			scopyto = hashp->BSIZE;
-			moved = 0;
-
-			if (last_bfp)
-				__free_ovflpage(hashp, last_bfp);
-			last_bfp = bufp;
-		}
-		/* Move regular sized pairs of there are any */
-		off = hashp->BSIZE;
-		for (n = 1; (n < ino[0]) && (ino[n + 1] >= REAL_KEY); n += 2) {
-			cino = (char *)ino;
-			key.data = (u_char *)cino + ino[n];
-			key.size = off - ino[n];
-			val.data = (u_char *)cino + ino[n + 1];
-			val.size = ino[n] - ino[n + 1];
-			off = ino[n + 1];
-
-			if (__call_hash(hashp, key.data, key.size) == obucket) {
-				/* Keep on old page */
-				if (PAIRFITS(op, (&key), (&val)))
-					putpair((char *)op, &key, &val);
-				else {
-					old_bufp =
-					    __add_ovflpage(hashp, old_bufp);
-					if (!old_bufp)
-						return (-1);
-					op = (__uint16_t *)old_bufp->page;
-					putpair((char *)op, &key, &val);
-				}
-				old_bufp->flags |= BUF_MOD;
-			} else {
-				/* Move to new page */
-				if (PAIRFITS(np, (&key), (&val)))
-					putpair((char *)np, &key, &val);
-				else {
-					new_bufp =
-					    __add_ovflpage(hashp, new_bufp);
-					if (!new_bufp)
-						return (-1);
-					np = (__uint16_t *)new_bufp->page;
-					putpair((char *)np, &key, &val);
-				}
-				new_bufp->flags |= BUF_MOD;
-			}
-		}
-	}
-	if (last_bfp)
-		__free_ovflpage(hashp, last_bfp);
-	return (0);
-}
-
-/*
- * Add the given pair to the page
- *
- * Returns:
- *	0 ==> OK
- *	1 ==> failure
- */
-extern int
-__addel(hashp, bufp, key, val)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-	const DBT *key, *val;
-{
-	__uint16_t *bp, *sop;
-	int do_expand;
-
-	bp = (__uint16_t *)bufp->page;
-	do_expand = 0;
-	while (bp[0] && (bp[2] < REAL_KEY || bp[bp[0]] < REAL_KEY))
-		/* Exception case */
-		if (bp[2] == FULL_KEY_DATA && bp[0] == 2)
-			/* This is the last page of a big key/data pair
-			   and we need to add another page */
-			break;
-		else if (bp[2] < REAL_KEY && bp[bp[0]] != OVFLPAGE) {
-			bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-			if (!bufp)
-				return (-1);
-			bp = (__uint16_t *)bufp->page;
-		} else
-			/* Try to squeeze key on this page */
-			if (FREESPACE(bp) > PAIRSIZE(key, val)) {
-				squeeze_key(bp, key, val);
-				return (0);
-			} else {
-				bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
-				if (!bufp)
-					return (-1);
-				bp = (__uint16_t *)bufp->page;
-			}
-
-	if (PAIRFITS(bp, key, val))
-		putpair(bufp->page, key, val);
-	else {
-		do_expand = 1;
-		bufp = __add_ovflpage(hashp, bufp);
-		if (!bufp)
-			return (-1);
-		sop = (__uint16_t *)bufp->page;
-
-		if (PAIRFITS(sop, key, val))
-			putpair((char *)sop, key, val);
-		else
-			if (__big_insert(hashp, bufp, key, val))
-				return (-1);
-	}
-	bufp->flags |= BUF_MOD;
-	/*
-	 * If the average number of keys per bucket exceeds the fill factor,
-	 * expand the table.
-	 */
-	hashp->NKEYS++;
-	if (do_expand ||
-	    (hashp->NKEYS / (hashp->MAX_BUCKET + 1) > hashp->FFACTOR))
-		return (__expand_table(hashp));
-	return (0);
-}
-
-/*
- *
- * Returns:
- *	pointer on success
- *	NULL on error
- */
-extern BUFHEAD *
-__add_ovflpage(hashp, bufp)
-	HTAB *hashp;
-	BUFHEAD *bufp;
-{
-	__uint16_t *sp;
-	__uint16_t ndx, ovfl_num;
-#ifdef DEBUG1
-	int tmp1, tmp2;
-#endif
-	sp = (__uint16_t *)bufp->page;
-
-	/* Check if we are dynamically determining the fill factor */
-	if (hashp->FFACTOR == DEF_FFACTOR) {
-		hashp->FFACTOR = sp[0] >> 1;
-		if (hashp->FFACTOR < MIN_FFACTOR)
-			hashp->FFACTOR = MIN_FFACTOR;
-	}
-	bufp->flags |= BUF_MOD;
-	ovfl_num = overflow_page(hashp);
-#ifdef DEBUG1
-	tmp1 = bufp->addr;
-	tmp2 = bufp->ovfl ? bufp->ovfl->addr : 0;
-#endif
-	if (!ovfl_num || !(bufp->ovfl = __get_buf(hashp, ovfl_num, bufp, 1)))
-		return (NULL);
-	bufp->ovfl->flags |= BUF_MOD;
-#ifdef DEBUG1
-	(void)fprintf(stderr, "ADDOVFLPAGE: %d->ovfl was %d is now %d\n",
-	    tmp1, tmp2, bufp->ovfl->addr);
-#endif
-	ndx = sp[0];
-	/*
-	 * Since a pair is allocated on a page only if there's room to add
-	 * an overflow page, we know that the OVFL information will fit on
-	 * the page.
-	 */
-	sp[ndx + 4] = OFFSET(sp);
-	sp[ndx + 3] = FREESPACE(sp) - OVFLSIZE;
-	sp[ndx + 1] = ovfl_num;
-	sp[ndx + 2] = OVFLPAGE;
-	sp[0] = ndx + 2;
-#ifdef HASH_STATISTICS
-	hash_overflows++;
-#endif
-	return (bufp->ovfl);
-}
-
-/*
- * Returns:
- *	 0 indicates SUCCESS
- *	-1 indicates FAILURE
- */
-extern int
-__get_page(hashp, p, bucket, is_bucket, is_disk, is_bitmap)
-	HTAB *hashp;
-	char *p;
-	__uint32_t bucket;
-	int is_bucket, is_disk, is_bitmap;
-{
-	int fd, page, size;
-	int rsize;
-	__uint16_t *bp;
-
-	fd = hashp->fp;
-	size = hashp->BSIZE;
-
-	if ((fd == -1) || !is_disk) {
-		PAGE_INIT(p);
-		return (0);
-	}
-	if (is_bucket)
-		page = BUCKET_TO_PAGE(bucket);
-	else
-		page = OADDR_TO_PAGE(bucket);
-	if ((lseek(fd, (off_t)page << hashp->BSHIFT, SEEK_SET) == -1) ||
-	    ((rsize = read(fd, p, size)) == -1))
-		return (-1);
-	bp = (__uint16_t *)p;
-	if (!rsize)
-		bp[0] = 0;	/* We hit the EOF, so initialize a new page */
-	else
-		if (rsize != size) {
-			errno = EFTYPE;
-			return (-1);
-		}
-	if (!is_bitmap && !bp[0]) {
-		PAGE_INIT(p);
-	} else
-               if (hashp->LORDER != DB_BYTE_ORDER) {
-			int i, max;
-
-			if (is_bitmap) {
-				max = hashp->BSIZE >> 2; /* divide by 4 */
-				for (i = 0; i < max; i++)
-					M_32_SWAP(((int *)p)[i]);
-			} else {
-				M_16_SWAP(bp[0]);
-				max = bp[0] + 2;
-				for (i = 1; i <= max; i++)
-					M_16_SWAP(bp[i]);
-			}
-		}
-	return (0);
-}
-
-/*
- * Write page p to disk
- *
- * Returns:
- *	 0 ==> OK
- *	-1 ==>failure
- */
-extern int
-__put_page(hashp, p, bucket, is_bucket, is_bitmap)
-	HTAB *hashp;
-	char *p;
-	__uint32_t bucket;
-	int is_bucket, is_bitmap;
-{
-	int fd, page, size;
-	int wsize;
-
-	size = hashp->BSIZE;
-	if ((hashp->fp == -1) && open_temp(hashp))
-		return (-1);
-	fd = hashp->fp;
-
-       if (hashp->LORDER != DB_BYTE_ORDER) {
-		int i;
-		int max;
-
-		if (is_bitmap) {
-			max = hashp->BSIZE >> 2;	/* divide by 4 */
-			for (i = 0; i < max; i++)
-				M_32_SWAP(((int *)p)[i]);
-		} else {
-			max = ((__uint16_t *)p)[0] + 2;
-			for (i = 0; i <= max; i++)
-				M_16_SWAP(((__uint16_t *)p)[i]);
-		}
-	}
-	if (is_bucket)
-		page = BUCKET_TO_PAGE(bucket);
-	else
-		page = OADDR_TO_PAGE(bucket);
-	if ((lseek(fd, (off_t)page << hashp->BSHIFT, SEEK_SET) == -1) ||
-	    ((wsize = write(fd, p, size)) == -1))
-		/* Errno is set */
-		return (-1);
-	if (wsize != size) {
-		errno = EFTYPE;
-		return (-1);
-	}
-	return (0);
-}
-
-#define BYTE_MASK	((1 << INT_BYTE_SHIFT) -1)
-/*
- * Initialize a new bitmap page.  Bitmap pages are left in memory
- * once they are read in.
- */
-extern int
-__ibitmap(hashp, pnum, nbits, ndx)
-	HTAB *hashp;
-	int pnum, nbits, ndx;
-{
-	__uint32_t *ip;
-	int clearbytes, clearints;
-
-	if ((ip = (__uint32_t *)malloc(hashp->BSIZE)) == NULL)
-		return (1);
-	hashp->nmaps++;
-	clearints = ((nbits - 1) >> INT_BYTE_SHIFT) + 1;
-	clearbytes = clearints << INT_TO_BYTE;
-	(void)memset((char *)ip, 0, clearbytes);
-	(void)memset(((char *)ip) + clearbytes, 0xFF,
-	    hashp->BSIZE - clearbytes);
-	ip[clearints - 1] = ALL_SET << (nbits & BYTE_MASK);
-	SETBIT(ip, 0);
-	hashp->BITMAPS[ndx] = (__uint16_t)pnum;
-	hashp->mapp[ndx] = ip;
-	return (0);
-}
-
-static __uint32_t
-first_free(map)
-	__uint32_t map;
-{
-	__uint32_t i, mask;
-
-	mask = 0x1;
-	for (i = 0; i < BITS_PER_MAP; i++) {
-		if (!(mask & map))
-			return (i);
-		mask = mask << 1;
-	}
-	return (i);
-}
-
-static __uint16_t
-overflow_page(hashp)
-	HTAB *hashp;
-{
-	__uint32_t *freep;
-	int max_free, offset, splitnum;
-	__uint16_t addr;
-	int bit, first_page, free_bit, free_page, i, in_use_bits, j;
-#ifdef DEBUG2
-	int tmp1, tmp2;
-#endif
-	splitnum = hashp->OVFL_POINT;
-	max_free = hashp->SPARES[splitnum];
-
-	free_page = (max_free - 1) >> (hashp->BSHIFT + BYTE_SHIFT);
-	free_bit = (max_free - 1) & ((hashp->BSIZE << BYTE_SHIFT) - 1);
-
-	/* Look through all the free maps to find the first free block */
-	first_page = hashp->LAST_FREED >>(hashp->BSHIFT + BYTE_SHIFT);
-	for ( i = first_page; i <= free_page; i++ ) {
-		if (!(freep = (__uint32_t *)hashp->mapp[i]) &&
-		    !(freep = fetch_bitmap(hashp, i)))
-			return (0);
-		if (i == free_page)
-			in_use_bits = free_bit;
-		else
-			in_use_bits = (hashp->BSIZE << BYTE_SHIFT) - 1;
-
-		if (i == first_page) {
-			bit = hashp->LAST_FREED &
-			    ((hashp->BSIZE << BYTE_SHIFT) - 1);
-			j = bit / BITS_PER_MAP;
-			bit = bit & ~(BITS_PER_MAP - 1);
-		} else {
-			bit = 0;
-			j = 0;
-		}
-		for (; bit <= in_use_bits; j++, bit += BITS_PER_MAP)
-			if (freep[j] != ALL_SET)
-				goto found;
-	}
-
-	/* No Free Page Found */
-	hashp->LAST_FREED = hashp->SPARES[splitnum];
-	hashp->SPARES[splitnum]++;
-	offset = hashp->SPARES[splitnum] -
-	    (splitnum ? hashp->SPARES[splitnum - 1] : 0);
-
-#define	OVMSG	"HASH: Out of overflow pages.  Increase page size\n"
-	if (offset > SPLITMASK) {
-		if (++splitnum >= NCACHED) {
-			(void)write(STDERR_FILENO, OVMSG, sizeof(OVMSG) - 1);
-			return (0);
-		}
-		hashp->OVFL_POINT = splitnum;
-		hashp->SPARES[splitnum] = hashp->SPARES[splitnum-1];
-		hashp->SPARES[splitnum-1]--;
-		offset = 1;
-	}
-
-	/* Check if we need to allocate a new bitmap page */
-	if (free_bit == (hashp->BSIZE << BYTE_SHIFT) - 1) {
-		free_page++;
-		if (free_page >= NCACHED) {
-			(void)write(STDERR_FILENO, OVMSG, sizeof(OVMSG) - 1);
-			return (0);
-		}
-		/*
-		 * This is tricky.  The 1 indicates that you want the new page
-		 * allocated with 1 clear bit.  Actually, you are going to
-		 * allocate 2 pages from this map.  The first is going to be
-		 * the map page, the second is the overflow page we were
-		 * looking for.  The init_bitmap routine automatically, sets
-		 * the first bit of itself to indicate that the bitmap itself
-		 * is in use.  We would explicitly set the second bit, but
-		 * don't have to if we tell init_bitmap not to leave it clear
-		 * in the first place.
-		 */
-		if (__ibitmap(hashp,
-		    (int)OADDR_OF(splitnum, offset), 1, free_page))
-			return (0);
-		hashp->SPARES[splitnum]++;
-#ifdef DEBUG2
-		free_bit = 2;
-#endif
-		offset++;
-		if (offset > SPLITMASK) {
-			if (++splitnum >= NCACHED) {
-				(void)write(STDERR_FILENO, OVMSG,
-				    sizeof(OVMSG) - 1);
-				return (0);
-			}
-			hashp->OVFL_POINT = splitnum;
-			hashp->SPARES[splitnum] = hashp->SPARES[splitnum-1];
-			hashp->SPARES[splitnum-1]--;
-			offset = 0;
-		}
-	} else {
-		/*
-		 * Free_bit addresses the last used bit.  Bump it to address
-		 * the first available bit.
-		 */
-		free_bit++;
-		SETBIT(freep, free_bit);
-	}
-
-	/* Calculate address of the new overflow page */
-	addr = OADDR_OF(splitnum, offset);
-#ifdef DEBUG2
-	(void)fprintf(stderr, "OVERFLOW_PAGE: ADDR: %d BIT: %d PAGE %d\n",
-	    addr, free_bit, free_page);
-#endif
-	return (addr);
-
-found:
-	bit = bit + first_free(freep[j]);
-	SETBIT(freep, bit);
-#ifdef DEBUG2
-	tmp1 = bit;
-	tmp2 = i;
-#endif
-	/*
-	 * Bits are addressed starting with 0, but overflow pages are addressed
-	 * beginning at 1. Bit is a bit addressnumber, so we need to increment
-	 * it to convert it to a page number.
-	 */
-	bit = 1 + bit + (i * (hashp->BSIZE << BYTE_SHIFT));
-	if (bit >= hashp->LAST_FREED)
-		hashp->LAST_FREED = bit - 1;
-
-	/* Calculate the split number for this page */
-	for (i = 0; (i < splitnum) && (bit > hashp->SPARES[i]); i++);
-	offset = (i ? bit - hashp->SPARES[i - 1] : bit);
-	if (offset >= SPLITMASK)
-		return (0);	/* Out of overflow pages */
-	addr = OADDR_OF(i, offset);
-#ifdef DEBUG2
-	(void)fprintf(stderr, "OVERFLOW_PAGE: ADDR: %d BIT: %d PAGE %d\n",
-	    addr, tmp1, tmp2);
-#endif
-
-	/* Allocate and return the overflow page */
-	return (addr);
-}
-
-/*
- * Mark this overflow page as free.
- */
-extern void
-__free_ovflpage(hashp, obufp)
-	HTAB *hashp;
-	BUFHEAD *obufp;
-{
-	__uint16_t addr;
-	__uint32_t *freep;
-	int bit_address, free_page, free_bit;
-	__uint16_t ndx;
-
-	addr = obufp->addr;
-#ifdef DEBUG1
-	(void)fprintf(stderr, "Freeing %d\n", addr);
-#endif
-	ndx = (((__uint16_t)addr) >> SPLITSHIFT);
-	bit_address =
-	    (ndx ? hashp->SPARES[ndx - 1] : 0) + (addr & SPLITMASK) - 1;
-	 if (bit_address < hashp->LAST_FREED)
-		hashp->LAST_FREED = bit_address;
-	free_page = (bit_address >> (hashp->BSHIFT + BYTE_SHIFT));
-	free_bit = bit_address & ((hashp->BSIZE << BYTE_SHIFT) - 1);
-
-	if (!(freep = hashp->mapp[free_page]))
-		freep = fetch_bitmap(hashp, free_page);
-#ifdef DEBUG
-	/*
-	 * This had better never happen.  It means we tried to read a bitmap
-	 * that has already had overflow pages allocated off it, and we
-	 * failed to read it from the file.
-	 */
-	if (!freep)
-		assert(0);
-#endif
-	CLRBIT(freep, free_bit);
-#ifdef DEBUG2
-	(void)fprintf(stderr, "FREE_OVFLPAGE: ADDR: %d BIT: %d PAGE %d\n",
-	    obufp->addr, free_bit, free_page);
-#endif
-	__reclaim_buf(hashp, obufp);
-}
-
-/*
- * Returns:
- *	 0 success
- *	-1 failure
- */
-static int
-open_temp(hashp)
-	HTAB *hashp;
-{
-	sigset_t set, oset;
-	static char namestr[] = "_hashXXXXXX";
-
-	/* Block signals; make sure file goes away at process exit. */
-	(void)sigfillset(&set);
-	(void)sigprocmask(SIG_BLOCK, &set, &oset);
-	if ((hashp->fp = mkstemp(namestr)) != -1) {
-		(void)unlink(namestr);
-#ifdef HAVE_FCNTL
-		(void)fcntl(hashp->fp, F_SETFD, 1);
-#endif
-	}
-	(void)sigprocmask(SIG_SETMASK, &oset, (sigset_t *)NULL);
-	return (hashp->fp != -1 ? 0 : -1);
-}
-
-/*
- * We have to know that the key will fit, but the last entry on the page is
- * an overflow pair, so we need to shift things.
- */
-static void
-squeeze_key(sp, key, val)
-	__uint16_t *sp;
-	const DBT *key, *val;
-{
-	char *p;
-	__uint16_t free_space, n, off, pageno;
-
-	p = (char *)sp;
-	n = sp[0];
-	free_space = FREESPACE(sp);
-	off = OFFSET(sp);
-
-	pageno = sp[n - 1];
-	off -= key->size;
-	sp[n - 1] = off;
-	memmove(p + off, key->data, key->size);
-	off -= val->size;
-	sp[n] = off;
-	memmove(p + off, val->data, val->size);
-	sp[0] = n + 2;
-	sp[n + 1] = pageno;
-	sp[n + 2] = OVFLPAGE;
-	FREESPACE(sp) = free_space - PAIRSIZE(key, val);
-	OFFSET(sp) = off;
-}
-
-static __uint32_t *
-fetch_bitmap(hashp, ndx)
-	HTAB *hashp;
-	int ndx;
-{
-	if (ndx >= hashp->nmaps)
-		return (NULL);
-	if ((hashp->mapp[ndx] = (__uint32_t *)malloc(hashp->BSIZE)) == NULL)
-		return (NULL);
-	if (__get_page(hashp,
-	    (char *)hashp->mapp[ndx], hashp->BITMAPS[ndx], 0, 1, 1)) {
-		free(hashp->mapp[ndx]);
-		return (NULL);
-	}
-	return (hashp->mapp[ndx]);
-}
-
-#ifdef DEBUG4
-int
-print_chain(addr)
-	int addr;
-{
-	BUFHEAD *bufp;
-	short *bp, oaddr;
-
-	(void)fprintf(stderr, "%d ", addr);
-	bufp = __get_buf(hashp, addr, NULL, 0);
-	bp = (short *)bufp->page;
-	while (bp[0] && ((bp[bp[0]] == OVFLPAGE) ||
-		((bp[0] > 2) && bp[2] < REAL_KEY))) {
-		oaddr = bp[bp[0] - 1];
-		(void)fprintf(stderr, "%d ", (int)oaddr);
-		bufp = __get_buf(hashp, (int)oaddr, bufp, 0);
-		bp = (short *)bufp->page;
-	}
-	(void)fprintf(stderr, "\n");
-}
-#endif
diff --git a/newlib/libc/search/hcreate.3 b/newlib/libc/search/hcreate.3
deleted file mode 100644
index 1619c9892..000000000
--- a/newlib/libc/search/hcreate.3
+++ /dev/null
@@ -1,206 +0,0 @@
-.\" $FreeBSD: src/lib/libc/stdlib/hcreate.3,v 1.2 2001/07/09 15:54:36 ru Exp $
-.\"
-.Dd May 8, 2001
-.Os
-.Dt HCREATE 3
-.Sh NAME
-.Nm hcreate , hdestroy , hsearch
-.Nd manage hash search table
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In search.h
-.Ft int
-.Fn hcreate "size_t nel"
-.Ft void
-.Fn hdestroy void
-.Ft ENTRY *
-.Fn hsearch "ENTRY item" "ACTION action"
-.Sh DESCRIPTION
-The
-.Fn hcreate ,
-.Fn hdestroy ,
-and
-.Fn hsearch
-functions manage hash search tables.
-.Pp
-The
-.Fn hcreate
-function allocates sufficient space for the table, and the application should
-ensure it is called before
-.Fn hsearch
-is used.
-The
-.Fa nel
-argument is an estimate of the maximum
-number of entries that the table should contain.
-This number may be adjusted upward by the
-algorithm in order to obtain certain mathematically favorable circumstances.
-.Pp
-The
-.Fn hdestroy
-function disposes of the search table, and may be followed by another call to
-.Fn hcreate .
-After the call to
-.Fn hdestroy ,
-the data can no longer be considered accessible.
-.Pp
-The
-.Fn hsearch
-function is a hash-table search routine.
-It returns a pointer into a hash table
-indicating the location at which an entry can be found.
-The
-.Fa item
-argument is a structure of type
-.Vt ENTRY
-(defined in the
-.Aq Pa search.h
-header) containing two pointers:
-.Fa item.key
-points to the comparison key (a
-.Vt "char *" ) ,
-and
-.Fa item.data
-(a
-.Vt "void *" )
-points to any other data to be associated with
-that key.
-The comparison function used by
-.Fn hsearch
-is
-.Xr strcmp 3 .
-The
-.Fa action
-argument is a
-member of an enumeration type
-.Vt ACTION
-indicating the disposition of the entry if it cannot be
-found in the table.
-.Dv ENTER
-indicates that the
-.Fa item
-should be inserted in the table at an
-appropriate point.
-.Dv FIND
-indicates that no entry should be made.
-Unsuccessful resolution is
-indicated by the return of a
-.Dv NULL
-pointer.
-.Sh RETURN VALUES
-The
-.Fn hcreate
-function returns 0 if it cannot allocate sufficient space for the table;
-otherwise, it returns non-zero.
-.Pp
-The
-.Fn hdestroy
-function does not return a value.
-.Pp
-The
-.Fn hsearch
-function returns a
-.Dv NULL
-pointer if either the
-.Fa action
-is
-.Dv FIND
-and the
-.Fa item
-could not be found or the
-.Fa action
-is
-.Dv ENTER
-and the table is full.
-.Sh ERRORS
-The
-.Fn hcreate
-and
-.Fn hsearch
-functions may fail if:
-.Bl -tag -width Er
-.It Bq Er ENOMEM
-Insufficient storage space is available.
-.El
-.Sh EXAMPLES
-The following example reads in strings followed by two numbers
-and stores them in a hash table, discarding duplicates.
-It then reads in strings and finds the matching entry in the hash
-table and prints it out.
-.Bd -literal
-#include <stdio.h>
-#include <search.h>
-#include <string.h>
-
-struct info {			/* This is the info stored in the table */
-	int age, room;		/* other than the key. */
-};
-
-#define NUM_EMPL	5000	/* # of elements in search table. */
-
-int
-main(void)
-{
-	char string_space[NUM_EMPL*20]; /* Space to store strings. */
-	struct info info_space[NUM_EMPL]; /* Space to store employee info. */
-	char *str_ptr = string_space; /* Next space in string_space. */
-	struct info *info_ptr = info_space; /* Next space in info_space. */
-	ENTRY item;
-	ENTRY *found_item; /* Name to look for in table. */
-	char name_to_find[30];
-	int i = 0;
-
-	/* Create table; no error checking is performed. */
-	(void) hcreate(NUM_EMPL);
-
-	while (scanf("%s%d%d", str_ptr, &info_ptr->age,
-	    &info_ptr->room) != EOF && i++ < NUM_EMPL) {
-		/* Put information in structure, and structure in item. */
-		item.key = str_ptr;
-		item.data = info_ptr;
-		str_ptr += strlen(str_ptr) + 1;
-		info_ptr++;
-		/* Put item into table. */
-		(void) hsearch(item, ENTER);
-	}
-
-	/* Access table. */
-	item.key = name_to_find;
-	while (scanf("%s", item.key) != EOF) {
-		if ((found_item = hsearch(item, FIND)) != NULL) {
-			/* If item is in the table. */
-			(void)printf("found %s, age = %d, room = %d\en",
-			    found_item->key,
-			    ((struct info *)found_item->data)->age,
-			    ((struct info *)found_item->data)->room);
-		} else
-			(void)printf("no such employee %s\en", name_to_find);
-	}
-	return 0;
-}
-.Ed
-.Sh SEE ALSO
-.Xr bsearch 3 ,
-.Xr lsearch 3 ,
-.Xr malloc 3 ,
-.Xr strcmp 3 ,
-.Xr tsearch 3
-.Sh STANDARDS
-The
-.Fn hcreate ,
-.Fn hdestroy ,
-and
-.Fn hsearch
-functions conform to
-.St -xpg4.2 .
-.Sh HISTORY
-The
-.Fn hcreate ,
-.Fn hdestroy ,
-and
-.Fn hsearch
-functions first appeared in
-.At V .
-.Sh BUGS
-The interface permits the use of only one hash table at a time.
diff --git a/newlib/libc/search/hcreate.c b/newlib/libc/search/hcreate.c
deleted file mode 100644
index 095e1f208..000000000
--- a/newlib/libc/search/hcreate.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* $NetBSD: hcreate.c,v 1.2 2001/02/19 21:26:04 ross Exp $ */
-
-/*
- * Copyright (c) 2001 Christopher G. Demetriou
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
- * <<Id: LICENSE_GC,v 1.1 2001/10/01 23:24:05 cgd Exp>>
- */
-
-/*
- * hcreate() / hsearch() / hdestroy()
- *
- * SysV/XPG4 hash table functions.
- *
- * Implementation done based on NetBSD manual page and Solaris manual page,
- * plus my own personal experience about how they're supposed to work.
- *
- * I tried to look at Knuth (as cited by the Solaris manual page), but
- * nobody had a copy in the office, so...
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: hcreate.c,v 1.2 2001/02/19 21:26:04 ross Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <sys/types.h>
-#include <sys/queue.h>
-#include <errno.h>
-#include <search.h>
-#include <stdlib.h>
-#include <string.h>
-
-static struct hsearch_data htab;
-
-int
-_DEFUN(hcreate, (nel), size_t nel)
-{
-  return hcreate_r (nel, &htab);
-}
-
-void
-_DEFUN_VOID (hdestroy)
-{
-  hdestroy_r (&htab);
-}
-
-ENTRY *
-_DEFUN(hsearch, (item, action), 
-       ENTRY item _AND
-       ACTION action)
-{
-  ENTRY *retval;
-
-  hsearch_r (item, action, &retval, &htab);
-
-  return retval;
-}
diff --git a/newlib/libc/search/hcreate_r.c b/newlib/libc/search/hcreate_r.c
deleted file mode 100644
index 4ff758fdb..000000000
--- a/newlib/libc/search/hcreate_r.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/* $NetBSD: hcreate.c,v 1.2 2001/02/19 21:26:04 ross Exp $ */
-
-/*
- * Copyright (c) 2001 Christopher G. Demetriou
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
- * <<Id: LICENSE_GC,v 1.1 2001/10/01 23:24:05 cgd Exp>>
- */
-
-/*
- * hcreate() / hsearch() / hdestroy()
- *
- * SysV/XPG4 hash table functions.
- *
- * Implementation done based on NetBSD manual page and Solaris manual page,
- * plus my own personal experience about how they're supposed to work.
- *
- * I tried to look at Knuth (as cited by the Solaris manual page), but
- * nobody had a copy in the office, so...
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: hcreate.c,v 1.2 2001/02/19 21:26:04 ross Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <sys/types.h>
-#include <sys/queue.h>
-#include <errno.h>
-#include <search.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*
- * DO NOT MAKE THIS STRUCTURE LARGER THAN 32 BYTES (4 ptrs on 64-bit
- * ptr machine) without adjusting MAX_BUCKETS_LG2 below.
- */
-struct internal_entry {
-	SLIST_ENTRY(internal_entry) link;
-	ENTRY ent;
-};
-SLIST_HEAD(internal_head, internal_entry);
-
-#define	MIN_BUCKETS_LG2	4
-#define	MIN_BUCKETS	(1 << MIN_BUCKETS_LG2)
-
-/*
- * max * sizeof internal_entry must fit into size_t.
- * assumes internal_entry is <= 32 (2^5) bytes.
- */
-#define	MAX_BUCKETS_LG2	(sizeof (size_t) * 8 - 1 - 5)
-#define	MAX_BUCKETS	((size_t)1 << MAX_BUCKETS_LG2)
-
-/* Default hash function, from db/hash/hash_func.c */
-extern __uint32_t (*__default_hash)(const void *, size_t);
-
-int
-hcreate_r(size_t nel, struct hsearch_data *htab)
-{
-	size_t idx;
-	unsigned int p2;
-
-	/* Make sure this this isn't called when a table already exists. */
-	if (htab->htable != NULL) {
-		errno = EINVAL;
-		return 0;
-	}
-
-	/* If nel is too small, make it min sized. */
-	if (nel < MIN_BUCKETS)
-		nel = MIN_BUCKETS;
-
-	/* If it's too large, cap it. */
-	if (nel > MAX_BUCKETS)
-		nel = MAX_BUCKETS;
-
-	/* If it's is not a power of two in size, round up. */
-	if ((nel & (nel - 1)) != 0) {
-		for (p2 = 0; nel != 0; p2++)
-			nel >>= 1;
-		nel = 1 << p2;
-	}
-	
-	/* Allocate the table. */
-	htab->htablesize = nel;
-	htab->htable = malloc(htab->htablesize * sizeof htab->htable[0]);
-	if (htab->htable == NULL) {
-		errno = ENOMEM;
-		return 0;
-	}
-
-	/* Initialize it. */
-	for (idx = 0; idx < htab->htablesize; idx++)
-		SLIST_INIT(&(htab->htable[idx]));
-
-	return 1;
-}
-
-void
-hdestroy_r(struct hsearch_data *htab)
-{
-	struct internal_entry *ie;
-	size_t idx;
-
-	if (htab->htable == NULL)
-		return;
-
-#if 0
-	for (idx = 0; idx < htab->htablesize; idx++) {
-		while (!SLIST_EMPTY(&(htab->htable[idx]))) {
-			ie = SLIST_FIRST(&(htab->htable[idx]));
-			SLIST_REMOVE_HEAD(&(htab->htable[idx]), link);
-                        free(ie->ent.key);
-			free(ie);
-		}
-	}
-#endif
-	free(htab->htable);
-	htab->htable = NULL;
-}
-
-int
-hsearch_r(ENTRY item, ACTION action, ENTRY **retval, struct hsearch_data *htab)
-{
-	struct internal_head *head;
-	struct internal_entry *ie;
-	__uint32_t hashval;
-	size_t len;
-
-	len = strlen(item.key);
-	hashval = (*__default_hash)(item.key, len);
-
-        head = &(htab->htable[hashval & (htab->htablesize - 1)]);
-	ie = SLIST_FIRST(head);
-	while (ie != NULL) {
-		if (strcmp(ie->ent.key, item.key) == 0)
-			break;
-		ie = SLIST_NEXT(ie, link);
-	}
-
-	if (ie != NULL)
-          {
-            *retval = &ie->ent;
-            return 1;
-          }
-	else if (action == FIND)
-          {
-            *retval = NULL;
-            return 0;
-          }
-
-	ie = malloc(sizeof *ie);
-	if (ie == NULL)
-          {
-            *retval = NULL;
-            return 0;
-          }
-	ie->ent.key = item.key;
-	ie->ent.data = item.data;
-
-	SLIST_INSERT_HEAD(head, ie, link);
-        *retval = &ie->ent;
-	return 1;
-}
diff --git a/newlib/libc/search/page.h b/newlib/libc/search/page.h
deleted file mode 100644
index 9ecabdacd..000000000
--- a/newlib/libc/search/page.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Margo Seltzer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)page.h	8.2 (Berkeley) 5/31/94
- * $FreeBSD: src/lib/libc/db/hash/page.h,v 1.2 2002/03/22 23:41:40 obrien Exp $
- */
-
-/*
- * Definitions for hashing page file format.
- */
-
-/*
- * routines dealing with a data page
- *
- * page format:
- *	+------------------------------+
- * p	| n | keyoff | datoff | keyoff |
- * 	+------------+--------+--------+
- *	| datoff | free  |  ptr  | --> |
- *	+--------+---------------------+
- *	|	 F R E E A R E A       |
- *	+--------------+---------------+
- *	|  <---- - - - | data          |
- *	+--------+-----+----+----------+
- *	|  key   | data     | key      |
- *	+--------+----------+----------+
- *
- * Pointer to the free space is always:  p[p[0] + 2]
- * Amount of free space on the page is:  p[p[0] + 1]
- */
-
-/*
- * How many bytes required for this pair?
- *	2 shorts in the table at the top of the page + room for the
- *	key and room for the data
- *
- * We prohibit entering a pair on a page unless there is also room to append
- * an overflow page. The reason for this it that you can get in a situation
- * where a single key/data pair fits on a page, but you can't append an
- * overflow page and later you'd have to split the key/data and handle like
- * a big pair.
- * You might as well do this up front.
- */
-
-#define	PAIRSIZE(K,D)	(2*sizeof(__uint16_t) + (K)->size + (D)->size)
-#define BIGOVERHEAD	(4*sizeof(__uint16_t))
-#define KEYSIZE(K)	(4*sizeof(__uint16_t) + (K)->size);
-#define OVFLSIZE	(2*sizeof(__uint16_t))
-#define FREESPACE(P)	((P)[(P)[0]+1])
-#define	OFFSET(P)	((P)[(P)[0]+2])
-#define PAIRFITS(P,K,D) \
-	(((P)[2] >= REAL_KEY) && \
-	    (PAIRSIZE((K),(D)) + OVFLSIZE) <= FREESPACE((P)))
-#define PAGE_META(N)	(((N)+3) * sizeof(__uint16_t))
-
-typedef struct {
-	BUFHEAD *newp;
-	BUFHEAD *oldp;
-	BUFHEAD *nextp;
-	__uint16_t next_addr;
-}       SPLIT_RETURN;
diff --git a/newlib/libc/search/qsort.c b/newlib/libc/search/qsort.c
deleted file mode 100644
index d47f47099..000000000
--- a/newlib/libc/search/qsort.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
-FUNCTION
-<<qsort>>---sort an array
-
-INDEX
-	qsort
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void qsort(void *<[base]>, size_t <[nmemb]>, size_t <[size]>,
-		   int (*<[compar]>)(const void *, const void *) );
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	qsort(<[base]>, <[nmemb]>, <[size]>, <[compar]> )
-	char *<[base]>;
-	size_t <[nmemb]>;
-	size_t <[size]>;
-	int (*<[compar]>)();
-
-DESCRIPTION
-<<qsort>> sorts an array (beginning at <[base]>) of <[nmemb]> objects.
-<[size]> describes the size of each element of the array.
-
-You must supply a pointer to a comparison function, using the argument
-shown as <[compar]>.  (This permits sorting objects of unknown
-properties.)  Define the comparison function to accept two arguments,
-each a pointer to an element of the array starting at <[base]>.  The
-result of <<(*<[compar]>)>> must be negative if the first argument is
-less than the second, zero if the two arguments match, and positive if
-the first argument is greater than the second (where ``less than'' and
-``greater than'' refer to whatever arbitrary ordering is appropriate).
-
-The array is sorted in place; that is, when <<qsort>> returns, the
-array elements beginning at <[base]> have been reordered.
-
-RETURNS
-<<qsort>> does not return a result.
-
-PORTABILITY
-<<qsort>> is required by ANSI (without specifying the sorting algorithm).
-*/
-
-/*-
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <stdlib.h>
-
-#ifndef __GNUC__
-#define inline
-#endif
-
-static inline char	*med3 _PARAMS((char *, char *, char *, int (*)()));
-static inline void	 swapfunc _PARAMS((char *, char *, int, int));
-
-#define min(a, b)	(a) < (b) ? a : b
-
-/*
- * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
- */
-#define swapcode(TYPE, parmi, parmj, n) { 		\
-	long i = (n) / sizeof (TYPE); 			\
-	register TYPE *pi = (TYPE *) (parmi); 		\
-	register TYPE *pj = (TYPE *) (parmj); 		\
-	do { 						\
-		register TYPE	t = *pi;		\
-		*pi++ = *pj;				\
-		*pj++ = t;				\
-        } while (--i > 0);				\
-}
-
-#define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
-
-static inline void
-_DEFUN(swapfunc, (a, b, n, swaptype),
-	char *a _AND
-	char *b _AND
-	int n _AND
-	int swaptype)
-{
-	if(swaptype <= 1) 
-		swapcode(long, a, b, n)
-	else
-		swapcode(char, a, b, n)
-}
-
-#define swap(a, b)					\
-	if (swaptype == 0) {				\
-		long t = *(long *)(a);			\
-		*(long *)(a) = *(long *)(b);		\
-		*(long *)(b) = t;			\
-	} else						\
-		swapfunc(a, b, es, swaptype)
-
-#define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
-
-static inline char *
-_DEFUN(med3, (a, b, c, cmp),
-	char *a _AND
-	char *b _AND
-	char *c _AND
-	int (*cmp)())
-{
-	return cmp(a, b) < 0 ?
-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
-}
-
-void
-_DEFUN(qsort, (a, n, es, cmp),
-	void *a _AND
-	size_t n _AND
-	size_t es _AND
-	int (*cmp)())
-{
-	char *pa, *pb, *pc, *pd, *pl, *pm, *pn;
-	int d, r, swaptype, swap_cnt;
-
-loop:	SWAPINIT(a, es);
-	swap_cnt = 0;
-	if (n < 7) {
-		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
-			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
-			     pl -= es)
-				swap(pl, pl - es);
-		return;
-	}
-	pm = (char *) a + (n / 2) * es;
-	if (n > 7) {
-		pl = a;
-		pn = (char *) a + (n - 1) * es;
-		if (n > 40) {
-			d = (n / 8) * es;
-			pl = med3(pl, pl + d, pl + 2 * d, cmp);
-			pm = med3(pm - d, pm, pm + d, cmp);
-			pn = med3(pn - 2 * d, pn - d, pn, cmp);
-		}
-		pm = med3(pl, pm, pn, cmp);
-	}
-	swap(a, pm);
-	pa = pb = (char *) a + es;
-
-	pc = pd = (char *) a + (n - 1) * es;
-	for (;;) {
-		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
-			if (r == 0) {
-				swap_cnt = 1;
-				swap(pa, pb);
-				pa += es;
-			}
-			pb += es;
-		}
-		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
-			if (r == 0) {
-				swap_cnt = 1;
-				swap(pc, pd);
-				pd -= es;
-			}
-			pc -= es;
-		}
-		if (pb > pc)
-			break;
-		swap(pb, pc);
-		swap_cnt = 1;
-		pb += es;
-		pc -= es;
-	}
-	if (swap_cnt == 0) {  /* Switch to insertion sort */
-		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
-			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0; 
-			     pl -= es)
-				swap(pl, pl - es);
-		return;
-	}
-
-	pn = (char *) a + n * es;
-	r = min(pa - (char *)a, pb - pa);
-	vecswap(a, pb - r, r);
-	r = min(pd - pc, pn - pd - es);
-	vecswap(pb, pn - r, r);
-	if ((r = pb - pa) > es)
-		qsort(a, r / es, es, cmp);
-	if ((r = pd - pc) > es) { 
-		/* Iterate rather than recurse to save stack space */
-		a = pn - r;
-		n = r / es;
-		goto loop;
-	}
-/*		qsort(pn - r, r / es, es, cmp);*/
-}
diff --git a/newlib/libc/search/tdelete.c b/newlib/libc/search/tdelete.c
deleted file mode 100644
index e75659913..000000000
--- a/newlib/libc/search/tdelete.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*	$NetBSD: tdelete.c,v 1.2 1999/09/16 11:45:37 lukem Exp $	*/
-
-/*
- * Tree search generalized from Knuth (6.2.2) Algorithm T just like
- * the AT&T man page says.
- *
- * The node_t structure is for internal use only, lint doesn't grok it.
- *
- * Written by reading the System V Interface Definition, not the code.
- *
- * Totally public domain.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: tdelete.c,v 1.2 1999/09/16 11:45:37 lukem Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <assert.h>
-#define _SEARCH_PRIVATE
-#include <search.h>
-#include <stdlib.h>
-
-
-/* delete node with given key */
-void *
-_DEFUN(tdelete, (vkey, vrootp, compar),
-	const void *vkey _AND	/* key to be deleted */
-	void      **vrootp _AND	/* address of the root of tree */
-	int       (*compar)(const void *, const void *))
-{
-	node_t **rootp = (node_t **)vrootp;
-	node_t *p, *q, *r;
-	int  cmp;
-
-	if (rootp == NULL || (p = *rootp) == NULL)
-		return NULL;
-
-	while ((cmp = (*compar)(vkey, (*rootp)->key)) != 0) {
-		p = *rootp;
-		rootp = (cmp < 0) ?
-		    &(*rootp)->llink :		/* follow llink branch */
-		    &(*rootp)->rlink;		/* follow rlink branch */
-		if (*rootp == NULL)
-			return NULL;		/* key not found */
-	}
-	r = (*rootp)->rlink;			/* D1: */
-	if ((q = (*rootp)->llink) == NULL)	/* Left NULL? */
-		q = r;
-	else if (r != NULL) {			/* Right link is NULL? */
-		if (r->llink == NULL) {		/* D2: Find successor */
-			r->llink = q;
-			q = r;
-		} else {			/* D3: Find NULL link */
-			for (q = r->llink; q->llink != NULL; q = r->llink)
-				r = q;
-			r->llink = q->rlink;
-			q->llink = (*rootp)->llink;
-			q->rlink = (*rootp)->rlink;
-		}
-	}
-	free(*rootp);				/* D4: Free node */
-	*rootp = q;				/* link parent to new node */
-	return p;
-}
diff --git a/newlib/libc/search/tdestroy.c b/newlib/libc/search/tdestroy.c
deleted file mode 100644
index 3e7327c4d..000000000
--- a/newlib/libc/search/tdestroy.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*	$NetBSD: tdelete.c,v 1.2 1999/09/16 11:45:37 lukem Exp $	*/
-
-/*
- * Tree search generalized from Knuth (6.2.2) Algorithm T just like
- * the AT&T man page says.
- *
- * The node_t structure is for internal use only, lint doesn't grok it.
- *
- * Written by reading the System V Interface Definition, not the code.
- *
- * Totally public domain.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: tdelete.c,v 1.2 1999/09/16 11:45:37 lukem Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <assert.h>
-#define _SEARCH_PRIVATE
-#include <search.h>
-#include <stdlib.h>
-
-
-/* Walk the nodes of a tree */
-static void
-trecurse(root, free_action)
-	node_t *root;	/* Root of the tree to be walked */
-	void (*free_action)(void *);
-{
-  if (root->llink != NULL)
-    trecurse(root->llink, free_action);
-  if (root->rlink != NULL)
-    trecurse(root->rlink, free_action);
-
-  (*free_action) ((void *) root->key);
-  free(root);
-}
-
-void
-_DEFUN(tdestroy, (vrootp, freefct),
-       void *vrootp _AND
-       void (*freefct)(void *))
-{
-  node_t *root = (node_t *) vrootp;
-
-  if (root != NULL)
-    trecurse(root, freefct);
-}
diff --git a/newlib/libc/search/tfind.c b/newlib/libc/search/tfind.c
deleted file mode 100644
index 5d7c40c93..000000000
--- a/newlib/libc/search/tfind.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*	$NetBSD: tfind.c,v 1.2 1999/09/16 11:45:37 lukem Exp $	*/
-
-/*
- * Tree search generalized from Knuth (6.2.2) Algorithm T just like
- * the AT&T man page says.
- *
- * The node_t structure is for internal use only, lint doesn't grok it.
- *
- * Written by reading the System V Interface Definition, not the code.
- *
- * Totally public domain.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: tfind.c,v 1.2 1999/09/16 11:45:37 lukem Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <assert.h>
-#define _SEARCH_PRIVATE
-#include <stdlib.h>
-#include <search.h>
-
-/* find a node, or return 0 */
-void *
-_DEFUN(tfind, (vkey, vrootp, compar),
-	const void *vkey _AND		/* key to be found */
-	void **vrootp _AND		/* address of the tree root */
-	int (*compar)(const void *, const void *))
-{
-	node_t **rootp = (node_t **)vrootp;
-
-	if (rootp == NULL)
-		return NULL;
-
-	while (*rootp != NULL) {		/* T1: */
-		int r;
-
-		if ((r = (*compar)(vkey, (*rootp)->key)) == 0)	/* T2: */
-			return *rootp;		/* key found */
-		rootp = (r < 0) ?
-		    &(*rootp)->llink :		/* T3: follow left branch */
-		    &(*rootp)->rlink;		/* T4: follow right branch */
-	}
-	return NULL;
-}
diff --git a/newlib/libc/search/tsearch.3 b/newlib/libc/search/tsearch.3
deleted file mode 100644
index a36fe894f..000000000
--- a/newlib/libc/search/tsearch.3
+++ /dev/null
@@ -1,118 +0,0 @@
-.\" $NetBSD$
-.\" Copyright (c) 1997 Todd C. Miller <Todd.Miller@courtesan.com>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\"    derived from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
-.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
-.\" THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-.\" EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-.\" PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-.\" OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-.\" WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-.\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"	OpenBSD: tsearch.3,v 1.2 1998/06/21 22:13:49 millert Exp
-.\" $FreeBSD: src/lib/libc/stdlib/tsearch.3,v 1.7 2001/09/07 14:46:36 asmodai Exp $
-.\"
-.Dd June 15, 1997
-.Dt TSEARCH 3
-.Os
-.Sh NAME
-.Nm tsearch , tfind , tdelete , twalk
-.Nd manipulate binary search trees
-.Sh SYNOPSIS
-.In search.h
-.Ft void *
-.Fn tdelete "const void *key" "void **rootp" "int (*compar) (const void *, const void *)"
-.Ft void *
-.Fn tfind "const void *key" "void **rootp" "int (*compar) (const void *, const void *)"
-.Ft void *
-.Fn tsearch "const void *key" "void **rootp" "int (*compar) (const void *, const void *)"
-.Ft void
-.Fn twalk "const void *root" "void (*compar) (const void *, VISIT, int)"
-.Sh DESCRIPTION
-The
-.Fn tdelete ,
-.Fn tfind ,
-.Fn tsearch ,
-and
-.Fn twalk
-functions manage binary search trees based on algorithms T and D
-from Knuth (6.2.2).  The comparison function passed in by
-the user has the same style of return values as
-.Xr strcmp 3 .
-.Pp
-.Fn Tfind
-searches for the datum matched by the argument
-.Fa key
-in the binary tree rooted at
-.Fa rootp ,
-returning a pointer to the datum if it is found and NULL
-if it is not.
-.Pp
-.Fn Tsearch
-is identical to
-.Fn tfind
-except that if no match is found,
-.Fa key
-is inserted into the tree and a pointer to it is returned.  If
-.Fa rootp
-points to a NULL value a new binary search tree is created.
-.Pp
-.Fn Tdelete
-deletes a node from the specified binary search tree and returns
-a pointer to the parent of the node to be deleted.
-It takes the same arguments as
-.Fn tfind
-and
-.Fn tsearch .
-If the node to be deleted is the root of the binary search tree,
-.Fa rootp
-will be adjusted.
-.Pp
-.Fn Twalk
-walks the binary search tree rooted in
-.Fa root
-and calls the function
-.Fa action
-on each node.
-.Fa Action
-is called with three arguments: a pointer to the current node,
-a value from the enum
-.Sy "typedef enum { preorder, postorder, endorder, leaf } VISIT;"
-specifying the traversal type, and a node level (where level
-zero is the root of the tree).
-.Sh SEE ALSO
-.Xr bsearch 3 ,
-.Xr hsearch 3 ,
-.Xr lsearch 3
-.Sh RETURN VALUES
-The
-.Fn tsearch
-function returns NULL if allocation of a new node fails (usually
-due to a lack of free memory).
-.Pp
-.Fn Tfind ,
-.Fn tsearch ,
-and
-.Fn tdelete
-return NULL if
-.Fa rootp
-is NULL or the datum cannot be found.
-.Pp
-The
-.Fn twalk
-function returns no value.
diff --git a/newlib/libc/search/tsearch.c b/newlib/libc/search/tsearch.c
deleted file mode 100644
index 5f41b407d..000000000
--- a/newlib/libc/search/tsearch.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*	$NetBSD: tsearch.c,v 1.3 1999/09/16 11:45:37 lukem Exp $	*/
-
-/*
- * Tree search generalized from Knuth (6.2.2) Algorithm T just like
- * the AT&T man page says.
- *
- * The node_t structure is for internal use only, lint doesn't grok it.
- *
- * Written by reading the System V Interface Definition, not the code.
- *
- * Totally public domain.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: tsearch.c,v 1.3 1999/09/16 11:45:37 lukem Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <assert.h>
-#define _SEARCH_PRIVATE
-#include <search.h>
-#include <stdlib.h>
-
-/* find or insert datum into search tree */
-void *
-_DEFUN(tsearch, (vkey, vrootp, compar),
-	const void *vkey _AND		/* key to be located */
-	void **vrootp _AND		/* address of tree root */
-	int (*compar)(const void *, const void *))
-{
-	node_t *q;
-	node_t **rootp = (node_t **)vrootp;
-
-	if (rootp == NULL)
-		return NULL;
-
-	while (*rootp != NULL) {	/* Knuth's T1: */
-		int r;
-
-		if ((r = (*compar)(vkey, (*rootp)->key)) == 0)	/* T2: */
-			return *rootp;		/* we found it! */
-
-		rootp = (r < 0) ?
-		    &(*rootp)->llink :		/* T3: follow left branch */
-		    &(*rootp)->rlink;		/* T4: follow right branch */
-	}
-
-	q = malloc(sizeof(node_t));		/* T5: key not found */
-	if (q != 0) {				/* make new node */
-		*rootp = q;			/* link new node to old */
-		/* LINTED const castaway ok */
-		q->key = (void *)vkey;		/* initialize new node */
-		q->llink = q->rlink = NULL;
-	}
-	return q;
-}
diff --git a/newlib/libc/search/twalk.c b/newlib/libc/search/twalk.c
deleted file mode 100644
index 74ad5a615..000000000
--- a/newlib/libc/search/twalk.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*	$NetBSD: twalk.c,v 1.1 1999/02/22 10:33:16 christos Exp $	*/
-
-/*
- * Tree search generalized from Knuth (6.2.2) Algorithm T just like
- * the AT&T man page says.
- *
- * The node_t structure is for internal use only, lint doesn't grok it.
- *
- * Written by reading the System V Interface Definition, not the code.
- *
- * Totally public domain.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: twalk.c,v 1.1 1999/02/22 10:33:16 christos Exp $");
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <assert.h>
-#define _SEARCH_PRIVATE
-#include <search.h>
-#include <stdlib.h>
-
-static void trecurse(const node_t *,
-    void (*action)(const void *, VISIT, int), int level);
-
-/* Walk the nodes of a tree */
-static void
-trecurse(root, action, level)
-	const node_t *root;	/* Root of the tree to be walked */
-	void (*action)(const void *, VISIT, int);
-	int level;
-{
-
-	if (root->llink == NULL && root->rlink == NULL)
-		(*action)(root, leaf, level);
-	else {
-		(*action)(root, preorder, level);
-		if (root->llink != NULL)
-			trecurse(root->llink, action, level + 1);
-		(*action)(root, postorder, level);
-		if (root->rlink != NULL)
-			trecurse(root->rlink, action, level + 1);
-		(*action)(root, endorder, level);
-	}
-}
-
-/* Walk the nodes of a tree */
-void
-_DEFUN(twalk, (vroot, action),
-	const void *vroot _AND	/* Root of the tree to be walked */
-	void (*action)(const void *, VISIT, int))
-{
-	if (vroot != NULL && action != NULL)
-		trecurse(vroot, action, 0);
-}
diff --git a/newlib/libc/signal/Makefile.am b/newlib/libc/signal/Makefile.am
deleted file mode 100644
index 7a8d4e53b..000000000
--- a/newlib/libc/signal/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = raise.c signal.c
-
-libsignal_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libsignal.la
-libsignal_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA = 
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES = raise.def signal.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/signal.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/signal/Makefile.in b/newlib/libc/signal/Makefile.in
deleted file mode 100644
index d8bb20bba..000000000
--- a/newlib/libc/signal/Makefile.in
+++ /dev/null
@@ -1,387 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = raise.c signal.c
-
-libsignal_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libsignal.la
-@USE_LIBTOOL_TRUE@libsignal_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-CHEWOUT_FILES = raise.def signal.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  raise.$(OBJEXT) signal.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libsignal_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libsignal_la_OBJECTS =  raise.lo signal.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libsignal_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libsignal_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus signal/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libsignal.la: $(libsignal_la_OBJECTS) $(libsignal_la_DEPENDENCIES)
-	$(LINK)  $(libsignal_la_LDFLAGS) $(libsignal_la_OBJECTS) $(libsignal_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = signal
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/signal.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/signal/raise.c b/newlib/libc/signal/raise.c
deleted file mode 100644
index bc47864e8..000000000
--- a/newlib/libc/signal/raise.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Embedded systems may want the simulated signals if no other form exists,
-   but UNIX versions will want to use the host facilities.
-   Define SIMULATED_SIGNALS when you want to use the simulated versions.
-*/
-
-/*
-FUNCTION
-<<raise>>---send a signal
-
-INDEX
-	raise
-INDEX
-	_raise_r
-
-ANSI_SYNOPSIS
-	#include <signal.h>
-	int raise(int <[sig]>);
-
-	int _raise_r(void *<[reent]>, int <[sig]>);
-
-TRAD_SYNOPSIS
-	#include <signal.h>
-	int raise(<[sig]>)
-	int <[sig]>;
-
-	int _raise_r(<[reent]>, <[sig]>)
-	char *<[reent]>;
-	int <[sig]>;
-
-DESCRIPTION
-Send the signal <[sig]> (one of the macros from `<<sys/signal.h>>').
-This interrupts your program's normal flow of execution, and allows a signal
-handler (if you've defined one, using <<signal>>) to take control.
-
-The alternate function <<_raise_r>> is a reentrant version.  The extra
-argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-The result is <<0>> if <[sig]> was successfully raised, <<1>>
-otherwise.  However, the return value (since it depends on the normal
-flow of execution) may not be visible, unless the signal handler for
-<[sig]> terminates with a <<return>> or unless <<SIG_IGN>> is in
-effect for this signal.
-
-PORTABILITY
-ANSI C requires <<raise>>, but allows the full set of signal numbers
-to vary from one implementation to another.
-
-Required OS subroutines: <<getpid>>, <<kill>>.
-*/
-
-#ifndef SIGNAL_PROVIDED
-
-int _dummy_raise;
-
-#else
-
-#include <reent.h>
-#include <signal.h>
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (raise, (sig),
-	int sig)
-{
-  return _raise_r (_REENT, sig);
-}
-
-#endif
-
-int
-_DEFUN (_raise_r, (reent, sig),
-	struct _reent *reent _AND
-	int sig)
-{
-  return _kill_r (reent, _getpid_r (reent), sig);
-}
-
-#endif /* SIGNAL_PROVIDED */
diff --git a/newlib/libc/signal/signal.c b/newlib/libc/signal/signal.c
deleted file mode 100644
index 20e919e74..000000000
--- a/newlib/libc/signal/signal.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
-FUNCTION
-<<signal>>---specify handler subroutine for a signal
-
-INDEX
-	signal
-INDEX
-	_signal_r
-INDEX
-	raise
-INDEX
-	_raise_r
-
-ANSI_SYNOPSIS
-	#include <signal.h>
-	void ( * signal(int <[sig]>, void(*<[func]>)(int)) )(int);
-
-	void ( * _signal_r(void *<[reent]>, 
-                           int <[sig]>, void(*<[func]>)(int)) )(int);
-
-	int raise (int <[sig]>);
-
-	int _raise_r (void *<[reent]>, int <[sig]>);
-
-TRAD_SYNOPSIS
-	#include <signal.h>
-	char ( * signal(<[sig]>, <[func]>) )()
-	int <[sig]>;
-	char ( * <[func]> )();
-
-	char ( * _signal_r(<[reent]>, <[sig]>, <[func]>) )()
-	char *<[reent]>;
-	int <[sig]>;
-	char ( * <[func]> )();
-
-	int raise (<[sig]>)()
-	int <[sig]>;
-
-	int _raise_r (<[reent]>, <[sig]>)()
-	char *<[reent]>;
-	int <[sig]>;
-
-DESCRIPTION
-<<signal, raise>> provide a simple signal/raise implementation for embedded
-targets.
-
-<<signal>> allows you to request changed treatment for a particular
-signal <[sig]>.  You can use one of the predefined macros <<SIG_DFL>>
-(select system default handling) or <<SIG_IGN>> (ignore this signal)
-as the value of <[func]>; otherwise, <[func]> is a function pointer
-that identifies a subroutine in your program as the handler for this signal.
-
-Some of the execution environment for signal handlers is
-unpredictable; notably, the only library function required to work
-correctly from within a signal handler is @code{signal} itself, and
-only when used to redefine the handler for the current signal value.
-
-Static storage is likewise unreliable for signal handlers, with one
-exception: if you declare a static storage location as `<<volatile
-sig_atomic_t>>', then you may use that location in a signal handler to
-store signal values.
-
-If your signal handler terminates using <<return>> (or implicit
-return), your program's execution continues at the point
-where it was when the signal was raised (whether by your program
-itself, or by an external event).  Signal handlers can also
-use functions such as <<exit>> and <<abort>> to avoid returning.
-
-<<raise>> sends the signal sig to the executing program.  It returns zero if
-successful, non-zero if unsuccessful.
-
-The alternate functions <<_signal_r, _raise_r>> are the reentrant versions.
-The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-@c FIXME: do we have setjmp.h and assoc fns?
-
-RETURNS
-If your request for a signal handler cannot be honored, the result is
-<<SIG_ERR>>; a specific error number is also recorded in <<errno>>.
-
-Otherwise, the result is the previous handler (a function pointer or
-one of the predefined macros).
-
-PORTABILITY
-ANSI C requires <<raise>>, <<signal>>.
-
-No supporting OS subroutines are required to link with <<signal>>, but
-it will not have any useful effects, except for software generated signals,
-without an operating system that can actually raise exceptions.
-*/
-
-/*
- * signal.c
- * Original Author:	G. Haley
- *
- * signal associates the function pointed to by func with the signal sig. When
- * a signal occurs, the value of func determines the action taken as follows:
- * if func is SIG_DFL, the default handling for that signal will occur; if func
- * is SIG_IGN, the signal will be ignored; otherwise, the default handling for
- * the signal is restored (SIG_DFL), and the function func is called with sig
- * as its argument. Returns the value of func for the previous call to signal
- * for the signal sig, or SIG_ERR if the request fails.
- */
-
-/* _init_signal initialises the signal handlers for each signal. This function
-   is called by crt0 at program startup.  */
-
-#ifdef SIGNAL_PROVIDED
-
-int _dummy_simulated_signal;
-
-#else
-
-#include <errno.h>
-#include <signal.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <reent.h>
-#include <_syslist.h>
-
-int
-_DEFUN (_init_signal_r, (ptr),
-	struct _reent *ptr)
-{
-  int i;
-
-  if (ptr->_sig_func == NULL)
-    {
-      ptr->_sig_func = (_sig_func_ptr *)_malloc_r (ptr, sizeof (_sig_func_ptr) * NSIG);
-      if (ptr->_sig_func == NULL)
-	return -1;
-
-      for (i = 0; i < NSIG; i++)
-	ptr->_sig_func[i] = SIG_DFL;
-    }
-
-  return 0;
-}
-
-_sig_func_ptr
-_DEFUN (_signal_r, (ptr, sig, func),
-	struct _reent *ptr _AND
-	int sig _AND
-	_sig_func_ptr func)
-{
-  _sig_func_ptr old_func;
-
-  if (sig < 0 || sig >= NSIG)
-    {
-      ptr->_errno = EINVAL;
-      return SIG_ERR;
-    }
-
-  if (ptr->_sig_func == NULL && _init_signal_r (ptr) != 0)
-    return SIG_ERR;
-  
-  old_func = ptr->_sig_func[sig];
-  ptr->_sig_func[sig] = func;
-
-  return old_func;
-}
-
-int 
-_DEFUN (_raise_r, (ptr, sig),
-     struct _reent *ptr _AND
-     int sig)
-{
-  _sig_func_ptr func;
-
-  if (sig < 0 || sig >= NSIG)
-    {
-      ptr->_errno = EINVAL;
-      return -1;
-    }
-
-  if (ptr->_sig_func == NULL && _init_signal_r (ptr) != 0)
-    return -1;
-  
-  func = ptr->_sig_func[sig];
-  if (func == SIG_DFL)
-    return _kill_r (ptr, _getpid_r (ptr), sig);
-  else if (func == SIG_IGN)
-    return 0;
-  else if (func == SIG_ERR)
-    {
-      ptr->_errno = EINVAL;
-      return 1;
-    }
-  else
-    {
-      ptr->_sig_func[sig] = SIG_DFL;
-      func (sig);
-      return 0;
-    }
-}
-
-int
-_DEFUN (__sigtramp_r, (ptr, sig),
-     struct _reent *ptr _AND
-     int sig)
-{
-  _sig_func_ptr func;
-
-  if (sig < 0 || sig >= NSIG)
-    {
-      return -1;
-    }
-
-  if (ptr->_sig_func == NULL && _init_signal_r (ptr) != 0)
-    return -1;
-
-  func = ptr->_sig_func[sig];
-  if (func == SIG_DFL)
-    return 1;
-  else if (func == SIG_ERR)
-    return 2;
-  else if (func == SIG_IGN)
-    return 3;
-  else
-    {
-      ptr->_sig_func[sig] = SIG_DFL;
-      func (sig);
-      return 0;
-    }
-}
-
-#ifndef _REENT_ONLY
-
-int 
-_DEFUN (raise, (sig),
-     int sig)
-{
-  return _raise_r (_REENT, sig);
-}
-
-_sig_func_ptr
-_DEFUN (signal, (sig, func),
-	int sig _AND
-	_sig_func_ptr func)
-{
-  return _signal_r (_REENT, sig, func);
-}
-
-int 
-_DEFUN_VOID (_init_signal)
-{
-  return _init_signal_r (_REENT);
-}
-
-int
-_DEFUN (__sigtramp, (sig), int sig)
-{
-  return __sigtramp_r (_REENT, sig);
-}
-
-#endif
-
-#endif /* !SIGNAL_PROVIDED */
diff --git a/newlib/libc/signal/signal.tex b/newlib/libc/signal/signal.tex
deleted file mode 100644
index 08c15bed8..000000000
--- a/newlib/libc/signal/signal.tex
+++ /dev/null
@@ -1,70 +0,0 @@
-@node Signals
-@chapter Signal Handling (@file{signal.h})
-
-A @dfn{signal} is an event that interrupts the normal flow of control
-in your program.  Your operating environment normally defines the full
-set of signals available (see @file{sys/signal.h}), as well as the
-default means of dealing with them---typically, either printing an
-error message and aborting your program, or ignoring the signal.
-
-All systems support at least the following signals:
-@table @code
-@item SIGABRT
-Abnormal termination of a program; raised by the <<abort>> function.
-
-@item SIGFPE
-A domain error in arithmetic, such as overflow, or division by zero.
-
-@item SIGILL
-Attempt to execute as a function data that is not executable.
-
-@item SIGINT
-Interrupt; an interactive attention signal.
-
-@item SIGSEGV
-An attempt to access a memory location that is not available.
-
-@item SIGTERM
-A request that your program end execution.
-@end table
-
-Two functions are available for dealing with asynchronous
-signals---one to allow your program to send signals to itself (this is
-called @dfn{raising} a signal), and one to specify subroutines (called
-@dfn{handlers} to handle particular signals that you anticipate may
-occur---whether raised by your own program or the operating environment.
-
-To support these functions, @file{signal.h} defines three macros:
-
-@table @code
-@item SIG_DFL
-Used with the @code{signal} function in place of a pointer to a
-handler subroutine, to select the operating environment's default
-handling of a signal.
-
-@item SIG_IGN
-Used with the @code{signal} function in place of a pointer to a
-handler, to ignore a particular signal.
-
-@item SIG_ERR
-Returned by the @code{signal} function in place of a pointer to a
-handler, to indicate that your request to set up a handler could not
-be honored for some reason.
-@end table
-
-@file{signal.h} also defines an integral type, @code{sig_atomic_t}.
-This type is not used in any function declarations; it exists only to
-allow your signal handlers to declare a static storage location where
-they may store a signal value.  (Static storage is not otherwise
-reliable from signal handlers.)
-
-@menu
-* raise::   Send a signal
-* signal::  Specify handler subroutine for a signal
-@end menu
-
-@page
-@include signal/raise.def
-
-@page
-@include signal/signal.def
diff --git a/newlib/libc/stdio/Makefile.am b/newlib/libc/stdio/Makefile.am
deleted file mode 100644
index 37911efb9..000000000
--- a/newlib/libc/stdio/Makefile.am
+++ /dev/null
@@ -1,222 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	clearerr.c 			\
-	fclose.c 			\
-	fdopen.c 			\
-	feof.c 				\
-	ferror.c 			\
-	fflush.c 			\
-	fgetc.c 			\
-	fgetpos.c 			\
-	fgets.c 			\
-	fileno.c			\
-	findfp.c 			\
-	fiprintf.c 			\
-	flags.c 			\
-	fopen.c 			\
-	fprintf.c 			\
-	fputc.c 			\
-	fputs.c 			\
-	fread.c 			\
-	freopen.c 			\
-	fscanf.c 			\
-	fseek.c 			\
-	fsetpos.c 			\
-	ftell.c 			\
-	fvwrite.c 			\
-	fwalk.c 			\
-	fwrite.c 			\
-	getc.c 				\
-	getchar.c 			\
-	getc_u.c			\
-	getchar_u.c			\
-	getdelim.c			\
-	getline.c			\
-	gets.c 				\
-	iprintf.c 			\
-	makebuf.c			\
-	perror.c 			\
-	printf.c 			\
-	putc.c 				\
-	putchar.c 			\
-	putc_u.c			\
-	putchar_u.c			\
-	puts.c 				\
-	refill.c 			\
-	remove.c 			\
-	rename.c 			\
-	rewind.c 			\
-	rget.c 				\
-	scanf.c 			\
-	setbuf.c 			\
-	setbuffer.c 			\
-	setlinebuf.c 			\
-	setvbuf.c 			\
-	siprintf.c 			\
-	snprintf.c			\
-	sprintf.c 			\
-	sscanf.c 			\
-	stdio.c 			\
-	tmpfile.c 			\
-	tmpnam.c 			\
-	ungetc.c 			\
-	vfscanf.c 			\
-	vprintf.c 			\
-	vscanf.c			\
-	vsnprintf.c			\
-	vsprintf.c 			\
-	vsscanf.c			\
-	wbuf.c 				\
-	wsetup.c 
-
-## The following are EL/IX level 2 interfaces
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	asprintf.$(oext)		\
-	fcloseall.$(oext)		\
-	fseeko.$(oext) 			\
-	ftello.$(oext) 			\
-	getw.$(oext)			\
-	mktemp.$(oext) 			\
-	putw.$(oext) 			\
-	vasprintf.$(oext)
-endif
-
-LIBADD_OBJS = vfiprintf.$(oext) vfprintf.$(oext)
-
-libstdio_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libstdio.la
-libstdio_la_SOURCES = $(GENERAL_SOURCES)
-libstdio_la_LIBADD = $(LIBADD_OBJS) $(LIB_OBJS)
-libstdio_la_DEPENDENCIES = $(LIBADD_OBJS) $(LIB_OBJS)
-LIB_COMPILE = $(LTCOMPILE)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIBADD_OBJS) $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIBADD_OBJS) $(LIB_OBJS)
-LIB_COMPILE = $(COMPILE)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-# This rule is needed so that libtool compiles vfiprintf before vfprintf. Otherwise
-# libtool moves vfprintf.o and subsequently can't find it.
-
-vfprintf.$(oext): vfprintf.c
-	$(LIB_COMPILE) -fshort-enums -c $(srcdir)/vfprintf.c
-
-vfiprintf.$(oext): vfprintf.c
-	$(LIB_COMPILE) -fshort-enums -DINTEGER_ONLY -c $(srcdir)/vfprintf.c -o $@
-
-CHEWOUT_FILES = \
-	clearerr.def		\
-	fclose.def		\
-	fcloseall.def		\
-	fdopen.def		\
-	feof.def		\
-	ferror.def		\
-	fflush.def		\
-	fgetc.def		\
-	fgetpos.def		\
-	fgets.def		\
-	fileno.def		\
-	fiprintf.def		\
-	fopen.def		\
-	fputc.def		\
-	fputs.def		\
-	fread.def		\
-	freopen.def		\
-	fseek.def		\
-	fsetpos.def		\
-	ftell.def		\
-	fwrite.def		\
-	getc.def		\
-	getchar.def		\
-	getc_u.def		\
-	getchar_u.def		\
-	getdelim.def		\
-	getline.def		\
-	gets.def		\
-	getw.def		\
-	iprintf.def		\
-	mktemp.def		\
-	perror.def		\
-	putc.def		\
-	putchar.def		\
-	putc_u.def		\
-	putchar_u.def		\
-	puts.def		\
-	putw.def		\
-	remove.def		\
-	rename.def		\
-	rewind.def		\
-	setbuf.def		\
-	setbuffer.def		\
-	setlinebuf.def		\
-	setvbuf.def		\
-	siprintf.def		\
-	sprintf.def		\
-	sscanf.def		\
-	tmpfile.def		\
-	tmpnam.def		\
-	vfprintf.def		\
-	vfscanf.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdio.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-
-fclose.$(oext): local.h
-fdopen.$(oext): local.h
-fflush.$(oext): local.h
-findfp.$(oext): local.h
-fopen.$(oext): local.h
-fputs.$(oext): fvwrite.h
-fread.$(oext): local.h
-freopen.$(oext): local.h
-fseek.$(oext): local.h
-ftell.$(oext): local.h
-fvwrite.$(oext): local.h fvwrite.h
-fwalk.$(oext): local.h
-fwrite.$(oext): local.h fvwrite.h
-makebuf.$(oext): local.h
-puts.$(oext): fvwrite.h
-refill.$(oext): local.h
-scanf.$(oext): local.h
-setbuf.$(oext): local.h
-setvbuf.$(oext): local.h
-siprintf.$(oext): local.h
-sprintf.$(oext): local.h
-sscanf.$(oext): local.h
-stdio.$(oext): local.h
-ungetc.$(oext): local.h
-vfiprintf.$(oext): local.h
-vfprintf.$(oext): local.h
-vfscanf.$(oext): local.h floatio.h
-vscanf.$(oext): local.h
-vsscanf.$(oext): local.h
-wbuf.$(oext): local.h fvwrite.h
-wsetup.$(oext): local.h
diff --git a/newlib/libc/stdio/Makefile.in b/newlib/libc/stdio/Makefile.in
deleted file mode 100644
index 4fa144998..000000000
--- a/newlib/libc/stdio/Makefile.in
+++ /dev/null
@@ -1,604 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	clearerr.c 			\
-	fclose.c 			\
-	fdopen.c 			\
-	feof.c 				\
-	ferror.c 			\
-	fflush.c 			\
-	fgetc.c 			\
-	fgetpos.c 			\
-	fgets.c 			\
-	fileno.c			\
-	findfp.c 			\
-	fiprintf.c 			\
-	flags.c 			\
-	fopen.c 			\
-	fprintf.c 			\
-	fputc.c 			\
-	fputs.c 			\
-	fread.c 			\
-	freopen.c 			\
-	fscanf.c 			\
-	fseek.c 			\
-	fsetpos.c 			\
-	ftell.c 			\
-	fvwrite.c 			\
-	fwalk.c 			\
-	fwrite.c 			\
-	getc.c 				\
-	getchar.c 			\
-	getc_u.c			\
-	getchar_u.c			\
-	getdelim.c			\
-	getline.c			\
-	gets.c 				\
-	iprintf.c 			\
-	makebuf.c			\
-	perror.c 			\
-	printf.c 			\
-	putc.c 				\
-	putchar.c 			\
-	putc_u.c			\
-	putchar_u.c			\
-	puts.c 				\
-	refill.c 			\
-	remove.c 			\
-	rename.c 			\
-	rewind.c 			\
-	rget.c 				\
-	scanf.c 			\
-	setbuf.c 			\
-	setbuffer.c 			\
-	setlinebuf.c 			\
-	setvbuf.c 			\
-	siprintf.c 			\
-	snprintf.c			\
-	sprintf.c 			\
-	sscanf.c 			\
-	stdio.c 			\
-	tmpfile.c 			\
-	tmpnam.c 			\
-	ungetc.c 			\
-	vfscanf.c 			\
-	vprintf.c 			\
-	vscanf.c			\
-	vsnprintf.c			\
-	vsprintf.c 			\
-	vsscanf.c			\
-	wbuf.c 				\
-	wsetup.c 
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	asprintf.$(oext)		\
-@ELIX_LEVEL_1_FALSE@	fcloseall.$(oext)		\
-@ELIX_LEVEL_1_FALSE@	fseeko.$(oext) 			\
-@ELIX_LEVEL_1_FALSE@	ftello.$(oext) 			\
-@ELIX_LEVEL_1_FALSE@	getw.$(oext)			\
-@ELIX_LEVEL_1_FALSE@	mktemp.$(oext) 			\
-@ELIX_LEVEL_1_FALSE@	putw.$(oext) 			\
-@ELIX_LEVEL_1_FALSE@	vasprintf.$(oext)
-
-LIBADD_OBJS = vfiprintf.$(oext) vfprintf.$(oext)
-
-libstdio_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libstdio.la
-@USE_LIBTOOL_TRUE@libstdio_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libstdio_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIBADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libstdio_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIBADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_TRUE@LIB_COMPILE = @USE_LIBTOOL_TRUE@$(LTCOMPILE)
-@USE_LIBTOOL_FALSE@LIB_COMPILE = @USE_LIBTOOL_FALSE@$(COMPILE)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(LIB_OBJS)
-
-CHEWOUT_FILES = \
-	clearerr.def		\
-	fclose.def		\
-	fcloseall.def		\
-	fdopen.def		\
-	feof.def		\
-	ferror.def		\
-	fflush.def		\
-	fgetc.def		\
-	fgetpos.def		\
-	fgets.def		\
-	fileno.def		\
-	fiprintf.def		\
-	fopen.def		\
-	fputc.def		\
-	fputs.def		\
-	fread.def		\
-	freopen.def		\
-	fseek.def		\
-	fsetpos.def		\
-	ftell.def		\
-	fwrite.def		\
-	getc.def		\
-	getchar.def		\
-	getc_u.def		\
-	getchar_u.def		\
-	getdelim.def		\
-	getline.def		\
-	gets.def		\
-	getw.def		\
-	iprintf.def		\
-	mktemp.def		\
-	perror.def		\
-	putc.def		\
-	putchar.def		\
-	putc_u.def		\
-	putchar_u.def		\
-	puts.def		\
-	putw.def		\
-	remove.def		\
-	rename.def		\
-	rewind.def		\
-	setbuf.def		\
-	setbuffer.def		\
-	setlinebuf.def		\
-	setvbuf.def		\
-	siprintf.def		\
-	sprintf.def		\
-	sscanf.def		\
-	tmpfile.def		\
-	tmpnam.def		\
-	vfprintf.def		\
-	vfscanf.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  clearerr.$(OBJEXT) fclose.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fdopen.$(OBJEXT) feof.$(OBJEXT) ferror.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fflush.$(OBJEXT) fgetc.$(OBJEXT) fgetpos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fgets.$(OBJEXT) fileno.$(OBJEXT) findfp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fiprintf.$(OBJEXT) flags.$(OBJEXT) fopen.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fprintf.$(OBJEXT) fputc.$(OBJEXT) fputs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fread.$(OBJEXT) freopen.$(OBJEXT) fscanf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fseek.$(OBJEXT) fsetpos.$(OBJEXT) ftell.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@fvwrite.$(OBJEXT) fwalk.$(OBJEXT) fwrite.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getc.$(OBJEXT) getchar.$(OBJEXT) getc_u.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getchar_u.$(OBJEXT) getdelim.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getline.$(OBJEXT) gets.$(OBJEXT) iprintf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@makebuf.$(OBJEXT) perror.$(OBJEXT) printf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@putc.$(OBJEXT) putchar.$(OBJEXT) putc_u.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@putchar_u.$(OBJEXT) puts.$(OBJEXT) refill.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@remove.$(OBJEXT) rename.$(OBJEXT) rewind.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@rget.$(OBJEXT) scanf.$(OBJEXT) setbuf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@setbuffer.$(OBJEXT) setlinebuf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@setvbuf.$(OBJEXT) siprintf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@snprintf.$(OBJEXT) sprintf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sscanf.$(OBJEXT) stdio.$(OBJEXT) tmpfile.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@tmpnam.$(OBJEXT) ungetc.$(OBJEXT) vfscanf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@vprintf.$(OBJEXT) vscanf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@vsnprintf.$(OBJEXT) vsprintf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@vsscanf.$(OBJEXT) wbuf.$(OBJEXT) wsetup.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libstdio_la_OBJECTS =  clearerr.lo fclose.lo fdopen.lo \
-@USE_LIBTOOL_TRUE@feof.lo ferror.lo fflush.lo fgetc.lo fgetpos.lo \
-@USE_LIBTOOL_TRUE@fgets.lo fileno.lo findfp.lo fiprintf.lo flags.lo \
-@USE_LIBTOOL_TRUE@fopen.lo fprintf.lo fputc.lo fputs.lo fread.lo \
-@USE_LIBTOOL_TRUE@freopen.lo fscanf.lo fseek.lo fsetpos.lo ftell.lo \
-@USE_LIBTOOL_TRUE@fvwrite.lo fwalk.lo fwrite.lo getc.lo getchar.lo \
-@USE_LIBTOOL_TRUE@getc_u.lo getchar_u.lo getdelim.lo getline.lo gets.lo \
-@USE_LIBTOOL_TRUE@iprintf.lo makebuf.lo perror.lo printf.lo putc.lo \
-@USE_LIBTOOL_TRUE@putchar.lo putc_u.lo putchar_u.lo puts.lo refill.lo \
-@USE_LIBTOOL_TRUE@remove.lo rename.lo rewind.lo rget.lo scanf.lo \
-@USE_LIBTOOL_TRUE@setbuf.lo setbuffer.lo setlinebuf.lo setvbuf.lo \
-@USE_LIBTOOL_TRUE@siprintf.lo snprintf.lo sprintf.lo sscanf.lo stdio.lo \
-@USE_LIBTOOL_TRUE@tmpfile.lo tmpnam.lo ungetc.lo vfscanf.lo vprintf.lo \
-@USE_LIBTOOL_TRUE@vscanf.lo vsnprintf.lo vsprintf.lo vsscanf.lo wbuf.lo \
-@USE_LIBTOOL_TRUE@wsetup.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libstdio_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libstdio_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus stdio/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libstdio.la: $(libstdio_la_OBJECTS) $(libstdio_la_DEPENDENCIES)
-	$(LINK)  $(libstdio_la_LDFLAGS) $(libstdio_la_OBJECTS) $(libstdio_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = stdio
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# This rule is needed so that libtool compiles vfiprintf before vfprintf. Otherwise
-# libtool moves vfprintf.o and subsequently can't find it.
-
-vfprintf.$(oext): vfprintf.c
-	$(LIB_COMPILE) -fshort-enums -c $(srcdir)/vfprintf.c
-
-vfiprintf.$(oext): vfprintf.c
-	$(LIB_COMPILE) -fshort-enums -DINTEGER_ONLY -c $(srcdir)/vfprintf.c -o $@
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdio.tex >> $(TARGETDOC)
-
-fclose.$(oext): local.h
-fdopen.$(oext): local.h
-fflush.$(oext): local.h
-findfp.$(oext): local.h
-fopen.$(oext): local.h
-fputs.$(oext): fvwrite.h
-fread.$(oext): local.h
-freopen.$(oext): local.h
-fseek.$(oext): local.h
-ftell.$(oext): local.h
-fvwrite.$(oext): local.h fvwrite.h
-fwalk.$(oext): local.h
-fwrite.$(oext): local.h fvwrite.h
-makebuf.$(oext): local.h
-puts.$(oext): fvwrite.h
-refill.$(oext): local.h
-scanf.$(oext): local.h
-setbuf.$(oext): local.h
-setvbuf.$(oext): local.h
-siprintf.$(oext): local.h
-sprintf.$(oext): local.h
-sscanf.$(oext): local.h
-stdio.$(oext): local.h
-ungetc.$(oext): local.h
-vfiprintf.$(oext): local.h
-vfprintf.$(oext): local.h
-vfscanf.$(oext): local.h floatio.h
-vscanf.$(oext): local.h
-vsscanf.$(oext): local.h
-wbuf.$(oext): local.h fvwrite.h
-wsetup.$(oext): local.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/stdio/asprintf.c b/newlib/libc/stdio/asprintf.c
deleted file mode 100644
index 1d7dd4bae..000000000
--- a/newlib/libc/stdio/asprintf.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* This code was copied from sprintf.c */
-
-#include <stdio.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include <limits.h>
-#include <_ansi.h>
-#include "local.h"
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (_asprintf_r, (ptr, strp, fmt), struct _reent *ptr _AND char **strp _AND _CONST char *fmt _DOTS)
-#else
-_asprintf_r (ptr, strp, fmt, va_alist)
-     struct _reent *ptr;
-     char **strp;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  /* mark a zero-length reallocatable buffer */
-  f._flags = __SWR | __SSTR | __SMBF;
-  f._bf._base = f._p = NULL;
-  f._bf._size = f._w = 0;
-  f._file = -1;  /* No file. */
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfprintf (&f, fmt, ap);
-  va_end (ap);
-  *f._p = 0;
-  *strp = f._bf._base;
-  return (ret);
-}
-
-#ifndef _REENT_ONLY
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (asprintf, (strp, fmt), char **strp _AND _CONST char *fmt _DOTS)
-#else
-asprintf (strp, fmt, va_alist)
-     char **strp;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-  
-  /* mark a zero-length reallocatable buffer */
-  f._flags = __SWR | __SSTR | __SMBF;
-  f._bf._base = f._p = NULL;
-  f._bf._size = f._w = 0;
-  f._file = -1;  /* No file. */
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfprintf (&f, fmt, ap);
-  va_end (ap);
-  *f._p = 0;
-  *strp = f._bf._base;
-  return (ret);
-}
-
-#endif
diff --git a/newlib/libc/stdio/clearerr.c b/newlib/libc/stdio/clearerr.c
deleted file mode 100644
index 6a1b0af3c..000000000
--- a/newlib/libc/stdio/clearerr.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<clearerr>>---clear file or stream error indicator
-
-INDEX
-	clearerr
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void clearerr(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void clearerr(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-The <<stdio>> functions maintain an error indicator with each file
-pointer <[fp]>, to record whether any read or write errors have
-occurred on the associated file or stream.  Similarly, it maintains an
-end-of-file indicator to record whether there is no more data in the
-file.
-
-Use <<clearerr>> to reset both of these indicators.
-
-See <<ferror>> and <<feof>> to query the two indicators.
-
-
-RETURNS
-<<clearerr>> does not return a result.
-
-PORTABILITY
-ANSI C requires <<clearerr>>.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdio.h>
-#undef	clearerr
-
-_VOID
-_DEFUN (clearerr, (fp),
-	FILE * fp)
-{
-  _flockfile(fp);
-  __sclearerr (fp);
-  _funlockfile(fp);
-}
diff --git a/newlib/libc/stdio/fclose.c b/newlib/libc/stdio/fclose.c
deleted file mode 100644
index b8cd51dc1..000000000
--- a/newlib/libc/stdio/fclose.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-FUNCTION
-<<fclose>>---close a file
-
-INDEX
-	fclose
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fclose(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fclose(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-If the file or stream identified by <[fp]> is open, <<fclose>> closes
-it, after first ensuring that any pending data is written (by calling
-<<fflush(<[fp]>)>>).
-
-RETURNS
-<<fclose>> returns <<0>> if successful (including when <[fp]> is
-<<NULL>> or not an open file); otherwise, it returns <<EOF>>.
-
-PORTABILITY
-<<fclose>> is required by ANSI C.
-
-Required OS subroutines: <<close>>, <<fstat>>, <<isatty>>, <<lseek>>,
-<<read>>, <<sbrk>>, <<write>>.
-*/
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "local.h"
-
-/*
- * Close a file.
- */
-
-int
-_DEFUN (fclose, (fp),
-	register FILE * fp)
-{
-  int r;
-
-  if (fp == NULL)
-    return (0);			/* on NULL */
-
-  _flockfile(fp);
-  
-  CHECK_INIT (fp);
-
-  if (fp->_flags == 0)		/* not open! */
-    {
-      _funlockfile(fp);
-      return (0);
-    }
-  r = fp->_flags & __SWR ? fflush (fp) : 0;
-  if (fp->_close != NULL && (*fp->_close) (fp->_cookie) < 0)
-    r = EOF;
-  if (fp->_flags & __SMBF)
-    _free_r (_REENT, (char *) fp->_bf._base);
-  if (HASUB (fp))
-    FREEUB (fp);
-  if (HASLB (fp))
-    FREELB (fp);
-  fp->_flags = 0;		/* release this FILE for reuse */
-  _funlockfile(fp);
-  return (r);
-}
diff --git a/newlib/libc/stdio/fcloseall.c b/newlib/libc/stdio/fcloseall.c
deleted file mode 100644
index d51c6fe34..000000000
--- a/newlib/libc/stdio/fcloseall.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-FUNCTION
-<<fcloseall>>---close all files
-
-INDEX
-	fcloseall
-INDEX
-	_fcloseall_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fcloseall(void);
-	int _fcloseall_r (struct _reent *<[ptr]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fcloseall()
-
-	int _fcloseall_r (<[ptr]>)
-	struct _reent *<[ptr]>;
-
-DESCRIPTION
-<<fcloseall>> closes all files in the current reentrancy struct's domain.
-The function <<_fcloseall_r>> is the same function, except the reentrancy
-struct is passed in as the <[ptr]> argument.
-
-This function is not recommended as it closes all streams, including
-the std streams.
-
-RETURNS
-<<fclose>> returns <<0>> if all closes are successful.  Otherwise,
-EOF is returned.
-
-PORTABILITY
-<<fcloseall>> is a glibc extension.
-
-Required OS subroutines: <<close>>, <<fstat>>, <<isatty>>, <<lseek>>,
-<<read>>, <<sbrk>>, <<write>>.
-*/
-
-/* This file based upon fwalk.c. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include "local.h"
-
-int
-_fcloseall_r (ptr)
-     struct _reent *ptr;
-{
-  register FILE *fp;
-  register int n, ret = 0;
-  register struct _glue *g;
-
-  for (g = &ptr->__sglue; g != NULL; g = g->_next)
-    for (fp = g->_iobs, n = g->_niobs; --n >= 0; fp++)
-      if (fp->_flags != 0)
-        ret |= fclose (fp);
-  return ret;
-}
-
-#ifndef _REENT_ONLY
-
-int
-fcloseall (void)
-{
-  return _fcloseall_r (_GLOBAL_REENT);
-}
-
-#endif
diff --git a/newlib/libc/stdio/fdopen.c b/newlib/libc/stdio/fdopen.c
deleted file mode 100644
index 0db6062dd..000000000
--- a/newlib/libc/stdio/fdopen.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
-FUNCTION
-<<fdopen>>---turn open file into a stream
-
-INDEX
-	fdopen
-INDEX
-	_fdopen_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *fdopen(int <[fd]>, const char *<[mode]>);
-	FILE *_fdopen_r(void *<[reent]>,
-                     int <[fd]>, const char *<[mode]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *fdopen(<[fd]>, <[mode]>)
-	int <[fd]>;
-	char *<[mode]>;
-
-	FILE *_fdopen_r(<[reent]>, <[fd]>, <[mode]>)
-	char *<[reent]>;
-        int <[fd]>;
-	char *<[mode]>);
-
-DESCRIPTION
-<<fdopen>> produces a file descriptor of type <<FILE *>>, from a
-descriptor for an already-open file (returned, for example, by the
-system subroutine <<open>> rather than by <<fopen>>).
-The <[mode]> argument has the same meanings as in <<fopen>>.
-
-RETURNS
-File pointer or <<NULL>>, as for <<fopen>>.
-
-PORTABILITY
-<<fdopen>> is ANSI.
-*/
-
-#include <sys/types.h>
-#include <sys/fcntl.h>
-
-#include <stdio.h>
-#include <errno.h>
-#include "local.h"
-#include <_syslist.h>
-
-extern int __sflags ();
-
-FILE *
-_DEFUN (_fdopen_r, (ptr, fd, mode),
-	struct _reent *ptr _AND
-	int fd _AND
-	_CONST char *mode)
-{
-  register FILE *fp;
-  int flags, oflags;
-#ifdef HAVE_FCNTL
-  int fdflags, fdmode;
-#endif
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    return 0;
-
-  /* make sure the mode the user wants is a subset of the actual mode */
-#ifdef HAVE_FCNTL
-  if ((fdflags = _fcntl_r (ptr, fd, F_GETFL, 0)) < 0)
-    return 0;
-  fdmode = fdflags & O_ACCMODE;
-  if (fdmode != O_RDWR && (fdmode != (oflags & O_ACCMODE)))
-    {
-      ptr->_errno = EBADF;
-      return 0;
-    }
-#endif
-
-  if ((fp = __sfp (ptr)) == 0)
-    return 0;
-  fp->_flags = flags;
-  /*
-   * If opened for appending, but underlying descriptor
-   * does not have O_APPEND bit set, assert __SAPP so that
-   * __swrite() will lseek to end before each write.
-   */
-  if ((oflags & O_APPEND)
-#ifdef HAVE_FCNTL
-       && !(fdflags & O_APPEND)
-#endif
-      )
-    fp->_flags |= __SAPP;
-  fp->_file = fd;
-  fp->_cookie = (_PTR) fp;
-
-#undef _read
-#undef _write
-#undef _seek
-#undef _close
-
-  fp->_read = __sread;
-  fp->_write = __swrite;
-  fp->_seek = __sseek;
-  fp->_close = __sclose;
-
-#ifdef __SCLE
-  /* Explicit given mode results in explicit setting mode on fd */
-  if (oflags & O_BINARY)
-    setmode(fp->_file, O_BINARY);
-  else if (oflags & O_TEXT)
-    setmode(fp->_file, O_TEXT);
-  if (__stextmode(fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (fdopen, (fd, mode),
-	int fd _AND
-	_CONST char *mode)
-{
-  return _fdopen_r (_REENT, fd, mode);
-}
-
-#endif
diff --git a/newlib/libc/stdio/feof.c b/newlib/libc/stdio/feof.c
deleted file mode 100644
index b7981bded..000000000
--- a/newlib/libc/stdio/feof.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-<<feof>>---test for end of file
-
-INDEX
-	feof
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int feof(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int feof(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<feof>> tests whether or not the end of the file identified by <[fp]>
-has been reached.
-
-RETURNS
-<<feof>> returns <<0>> if the end of file has not yet been reached; if
-at end of file, the result is nonzero.
-
-PORTABILITY
-<<feof>> is required by ANSI C.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdio.h>
-
-#undef feof
-
-int 
-_DEFUN (feof, (fp),
-	FILE * fp)
-{
-  int result;
-  _flockfile(fp);
-  result = __sfeof (fp);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/ferror.c b/newlib/libc/stdio/ferror.c
deleted file mode 100644
index ef17fd89d..000000000
--- a/newlib/libc/stdio/ferror.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<ferror>>---test whether read/write error has occurred
-
-INDEX
-	ferror
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int ferror(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int ferror(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-The <<stdio>> functions maintain an error indicator with each file
-pointer <[fp]>, to record whether any read or write errors have
-occurred on the associated file or stream.
-Use <<ferror>> to query this indicator.
-
-See <<clearerr>> to reset the error indicator.
-
-RETURNS
-<<ferror>> returns <<0>> if no errors have occurred; it returns a
-nonzero value otherwise.
-
-PORTABILITY
-ANSI C requires <<ferror>>.
-
-No supporting OS subroutines are required.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-/* A subroutine version of the macro ferror.  */
-
-#undef ferror
-
-int
-_DEFUN (ferror, (fp),
-	FILE * fp)
-{
-  int result;
-  _flockfile(fp);
-  result = __sferror (fp);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/fflush.c b/newlib/libc/stdio/fflush.c
deleted file mode 100644
index 30ac9967f..000000000
--- a/newlib/libc/stdio/fflush.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fflush>>---flush buffered file output
-
-INDEX
-	fflush
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fflush(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fflush(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-The <<stdio>> output functions can buffer output before delivering it
-to the host system, in order to minimize the overhead of system calls.
-
-Use <<fflush>> to deliver any such pending output (for the file
-or stream identified by <[fp]>) to the host system.
-
-If <[fp]> is <<NULL>>, <<fflush>> delivers pending output from all
-open files.
-
-RETURNS
-<<fflush>> returns <<0>> unless it encounters a write error; in that
-situation, it returns <<EOF>>.
-
-PORTABILITY
-ANSI C requires <<fflush>>.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdio.h>
-#include "local.h"
-
-/* Flush a single file, or (if fp is NULL) all files.  */
-
-int
-_DEFUN (fflush, (fp),
-	register FILE * fp)
-{
-  register unsigned char *p;
-  register int n, t;
-
-  if (fp == NULL)
-    return _fwalk (_GLOBAL_REENT, fflush);
-
-  _flockfile(fp);
-
-  CHECK_INIT (fp);
-
-  t = fp->_flags;
-  if ((t & __SWR) == 0 || (p = fp->_bf._base) == NULL)
-    {
-      _funlockfile(fp);
-      return 0;
-    }
-  n = fp->_p - p;		/* write this much */
-
-  /*
-   * Set these immediately to avoid problems with longjmp
-   * and to allow exchange buffering (via setvbuf) in user
-   * write function.
-   */
-  fp->_p = p;
-  fp->_w = t & (__SLBF | __SNBF) ? 0 : fp->_bf._size;
-
-  while (n > 0)
-    {
-      t = (*fp->_write) (fp->_cookie, (char *) p, n);
-      if (t <= 0)
-	{
-          fp->_flags |= __SERR;
-          _funlockfile(fp);
-          return EOF;
-	}
-      p += t;
-      n -= t;
-    }
-  _funlockfile(fp);
-  return 0;
-}
diff --git a/newlib/libc/stdio/fgetc.c b/newlib/libc/stdio/fgetc.c
deleted file mode 100644
index 1160b67a7..000000000
--- a/newlib/libc/stdio/fgetc.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-FUNCTION
-<<fgetc>>---get a character from a file or stream
-
-INDEX
-	fgetc
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fgetc(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fgetc(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-Use <<fgetc>> to get the next single character from the file or stream
-identified by <[fp]>.  As a side effect, <<fgetc>> advances the file's
-current position indicator.
-
-For a macro version of this function, see <<getc>>.
-
-RETURNS
-The next character (read as an <<unsigned char>>, and cast to
-<<int>>), unless there is no more data, or the host system reports a
-read error; in either of these situations, <<fgetc>> returns <<EOF>>.
-
-You can distinguish the two situations that cause an <<EOF>> result by
-using the <<ferror>> and <<feof>> functions.
-
-PORTABILITY
-ANSI C requires <<fgetc>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-
-int
-_DEFUN (fgetc, (fp),
-	FILE * fp)
-{
-  int result;
-  _flockfile(fp);
-  result = __sgetc (fp);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/fgetpos.c b/newlib/libc/stdio/fgetpos.c
deleted file mode 100644
index 26c69bf22..000000000
--- a/newlib/libc/stdio/fgetpos.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-FUNCTION
-<<fgetpos>>---record position in a stream or file
-
-INDEX
-	fgetpos
-INDEX
-	_fgetpos_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fgetpos(FILE *<[fp]>, fpos_t *<[pos]>);
-	int _fgetpos_r(struct _reent *<[ptr]>, FILE *<[fp]>, fpos_t *<[pos]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fgetpos(<[fp]>, <[pos]>)
-	FILE *<[fp]>;
-	fpos_t *<[pos]>;
-
-	int _fgetpos_r(<[ptr]>, <[fp]>, <[pos]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	fpos_t *<[pos]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fgetpos>> to report on the current position for a file
-identified by <[fp]>; <<fgetpos>> will write a value
-representing that position at <<*<[pos]>>>.  Later, you can
-use this value with <<fsetpos>> to return the file to this
-position.
-
-In the current implementation, <<fgetpos>> simply uses a character
-count to represent the file position; this is the same number that
-would be returned by <<ftell>>.
-
-RETURNS
-<<fgetpos>> returns <<0>> when successful.  If <<fgetpos>> fails, the
-result is <<1>>.  Failure occurs on streams that do not support
-positioning; the global <<errno>> indicates this condition with the
-value <<ESPIPE>>.
-
-PORTABILITY
-<<fgetpos>> is required by the ANSI C standard, but the meaning of the
-value it records is not specified beyond requiring that it be
-acceptable as an argument to <<fsetpos>>.  In particular, other
-conforming C implementations may return a different result from
-<<ftell>> than what <<fgetpos>> writes at <<*<[pos]>>>.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdio.h>
-
-int
-_DEFUN (_fgetpos_r, (ptr, fp, pos),
-	struct _reent * ptr _AND
-	FILE * fp _AND
-	_fpos_t * pos)
-{
-  _flockfile(fp);
-  *pos = _ftell_r (ptr, fp);
-
-  if (*pos != -1)
-    {
-      _funlockfile(fp);
-      return 0;
-    }
-  _funlockfile(fp);
-  return 1;
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (fgetpos, (fp, pos),
-	FILE * fp _AND
-	_fpos_t * pos)
-{
-  return _fgetpos_r (_REENT, fp, pos);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/fgets.c b/newlib/libc/stdio/fgets.c
deleted file mode 100644
index 46e190077..000000000
--- a/newlib/libc/stdio/fgets.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-
-FUNCTION
-        <<fgets>>---get character string from a file or stream
-INDEX
-	fgets
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-	char *fgets(char *<[buf]>, int <[n]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	char *fgets(<[buf]>,<[n]>,<[fp]>)
-        char *<[buf]>;
-	int <[n]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-	Reads at most <[n-1]> characters from <[fp]> until a newline
-	is found. The characters including to the newline are stored
-	in <[buf]>. The buffer is terminated with a 0.
-
-
-RETURNS
-	<<fgets>> returns the buffer passed to it, with the data
-	filled in. If end of file occurs with some data already
-	accumulated, the data is returned with no other indication. If
-	no data are read, NULL is returned instead.
-
-PORTABILITY
-	<<fgets>> should replace all uses of <<gets>>. Note however
-	that <<fgets>> returns all of the data, while <<gets>> removes
-	the trailing newline (with no indication that it has done so.)
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#include <string.h>
-
-extern int __srefill ();
-
-/*
- * Read at most n-1 characters from the given file.
- * Stop when a newline has been read, or the count runs out.
- * Return first argument, or NULL if no characters were read.
- */
-
-char *
-_DEFUN (fgets, (buf, n, fp),
-	char *buf _AND
-	int n _AND
-	FILE * fp)
-{
-  size_t len;
-  char *s;
-  unsigned char *p, *t;
-
-  if (n < 2)			/* sanity check */
-    return 0;
-
-  s = buf;
-
-  _flockfile(fp);
-#ifdef __SCLE
-  if (fp->_flags & __SCLE)
-    {
-      int c;
-      /* Sorry, have to do it the slow way */
-      while (--n > 0 && (c = __sgetc(fp)) != EOF)
-	{
-	  *s++ = c;
-	  if (c == '\n')
-	    break;
-	}
-      if (c == EOF && s == buf)
-        {
-          _funlockfile(fp);
-          return NULL;
-        }
-      *s = 0;
-      _funlockfile(fp);
-      return buf;
-    }
-#endif
-
-  n--;				/* leave space for NUL */
-  do
-    {
-      /*
-       * If the buffer is empty, refill it.
-       */
-      if ((len = fp->_r) <= 0)
-	{
-	  if (__srefill (fp))
-	    {
-	      /* EOF: stop with partial or no line */
-	      if (s == buf)
-                {
-                  _funlockfile(fp);
-                  return 0;
-                }
-	      break;
-	    }
-	  len = fp->_r;
-	}
-      p = fp->_p;
-
-      /*
-       * Scan through at most n bytes of the current buffer,
-       * looking for '\n'.  If found, copy up to and including
-       * newline, and stop.  Otherwise, copy entire chunk
-       * and loop.
-       */
-      if (len > n)
-	len = n;
-      t = (unsigned char *) memchr ((_PTR) p, '\n', len);
-      if (t != 0)
-	{
-	  len = ++t - p;
-	  fp->_r -= len;
-	  fp->_p = t;
-	  (void) memcpy ((_PTR) s, (_PTR) p, len);
-	  s[len] = 0;
-          _funlockfile(fp);
-	  return (buf);
-	}
-      fp->_r -= len;
-      fp->_p += len;
-      (void) memcpy ((_PTR) s, (_PTR) p, len);
-      s += len;
-    }
-  while ((n -= len) != 0);
-  *s = 0;
-  _funlockfile(fp);
-  return buf;
-}
diff --git a/newlib/libc/stdio/fileno.c b/newlib/libc/stdio/fileno.c
deleted file mode 100644
index c9ecbb424..000000000
--- a/newlib/libc/stdio/fileno.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-<<fileno>>---return file descriptor associated with stream
-
-INDEX
-	fileno
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fileno(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fileno(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-You can use <<fileno>> to return the file descriptor identified by <[fp]>.
-
-RETURNS
-<<fileno>> returns a non-negative integer when successful.
-If <[fp]> is not an open stream, <<fileno>> returns -1.
-
-PORTABILITY
-<<fileno>> is not part of ANSI C.
-POSIX requires <<fileno>>.
-
-Supporting OS subroutines required: none.
-*/
-
-#include <stdio.h>
-#include "local.h"
-
-int
-_DEFUN (fileno, (f),
-	FILE * f)
-{
-  int result;
-  _flockfile(f);
-  CHECK_INIT (f);
-  result = __sfileno (f);
-  _funlockfile(f);
-  return result;
-}
diff --git a/newlib/libc/stdio/findfp.c b/newlib/libc/stdio/findfp.c
deleted file mode 100644
index 2a907bb6d..000000000
--- a/newlib/libc/stdio/findfp.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <fcntl.h>
-#include <sys/lock.h>
-#include "local.h"
-
-static void
-std (ptr, flags, file, data)
-     FILE *ptr;
-     int flags;
-     int file;
-     struct _reent *data;
-{
-  ptr->_p = 0;
-  ptr->_r = 0;
-  ptr->_w = 0;
-  ptr->_flags = flags;
-  ptr->_file = file;
-  ptr->_bf._base = 0;
-  ptr->_bf._size = 0;
-  ptr->_lbfsize = 0;
-  ptr->_cookie = ptr;
-  ptr->_read = __sread;
-  ptr->_write = __swrite;
-  ptr->_seek = __sseek;
-  ptr->_close = __sclose;
-#ifndef __SINGLE_THREAD__
-  __lock_init_recursive (*(_LOCK_RECURSIVE_T *)&ptr->_lock);
-#endif
-
-#ifdef __SCLE
-  if (__stextmode(ptr->_file))
-    ptr->_flags |= __SCLE;
-#endif
-}
-
-struct _glue *
-__sfmoreglue (d, n)
-     struct _reent *d;
-     register int n;
-{
-  struct _glue *g;
-  FILE *p;
-
-  g = (struct _glue *) _malloc_r (d, sizeof (*g) + n * sizeof (FILE));
-  if (g == NULL)
-    return NULL;
-  p = (FILE *) (g + 1);
-  g->_next = NULL;
-  g->_niobs = n;
-  g->_iobs = p;
-  memset (p, 0, n * sizeof (FILE));
-  return g;
-}
-
-/*
- * Find a free FILE for fopen et al.
- */
-
-FILE *
-__sfp (d)
-     struct _reent *d;
-{
-  FILE *fp;
-  int n;
-  struct _glue *g;
-
-  if (!_GLOBAL_REENT->__sdidinit)
-    __sinit (_GLOBAL_REENT);
-  for (g = &_GLOBAL_REENT->__sglue;; g = g->_next)
-    {
-      for (fp = g->_iobs, n = g->_niobs; --n >= 0; fp++)
-	if (fp->_flags == 0)
-	  goto found;
-      if (g->_next == NULL &&
-	  (g->_next = __sfmoreglue (d, NDYNAMIC)) == NULL)
-	break;
-    }
-  d->_errno = ENOMEM;
-  return NULL;
-
-found:
-  fp->_flags = 1;		/* reserve this slot; caller sets real flags */
-  fp->_p = NULL;		/* no current pointer */
-  fp->_w = 0;			/* nothing to read or write */
-  fp->_r = 0;
-  fp->_bf._base = NULL;		/* no buffer */
-  fp->_bf._size = 0;
-  fp->_lbfsize = 0;		/* not line buffered */
-  fp->_file = -1;		/* no file */
-  /* fp->_cookie = <any>; */	/* caller sets cookie, _read/_write etc */
-  fp->_ub._base = NULL;		/* no ungetc buffer */
-  fp->_ub._size = 0;
-  fp->_lb._base = NULL;		/* no line buffer */
-  fp->_lb._size = 0;
-  return fp;
-}
-
-/*
- * exit() calls _cleanup() through *__cleanup, set whenever we
- * open or buffer a file.  This chicanery is done so that programs
- * that do not use stdio need not link it all in.
- *
- * The name `_cleanup' is, alas, fairly well known outside stdio.
- */
-
-void
-_cleanup_r (ptr)
-     struct _reent *ptr;
-{
-  /* (void) _fwalk(fclose); */
-  (void) _fwalk (ptr, fflush);	/* `cheating' */
-}
-
-#ifndef _REENT_ONLY
-void
-_cleanup ()
-{
-  _cleanup_r (_GLOBAL_REENT);
-}
-#endif
-
-/*
- * __sinit() is called whenever stdio's internal variables must be set up.
- */
-
-void
-__sinit (s)
-     struct _reent *s;
-{
-  /* make sure we clean up on exit */
-  s->__cleanup = _cleanup_r;	/* conservative */
-  s->__sdidinit = 1;
-
-  s->__sglue._next = NULL;
-#ifndef _REENT_SMALL
-  s->__sglue._niobs = 3;
-  s->__sglue._iobs = &s->__sf[0];
-#else
-  s->__sglue._niobs = 0;
-  s->__sglue._iobs = NULL;
-  s->_stdin = __sfp(s);
-  s->_stdout = __sfp(s);
-  s->_stderr = __sfp(s);
-#endif
-
-  std (s->_stdin,  __SRD, 0, s);
-
-  /* on platforms that have true file system I/O, we can verify whether stdout 
-     is an interactive terminal or not.  For all other platforms, we will
-     default to line buffered mode here.  */
-#ifdef HAVE_FCNTL
-  std (s->_stdout, __SWR, 1, s);
-#else
-  std (s->_stdout, __SWR | __SLBF, 1, s);
-#endif
-
-  std (s->_stderr, __SWR | __SNBF, 2, s);
-
-}
diff --git a/newlib/libc/stdio/fiprintf.c b/newlib/libc/stdio/fiprintf.c
deleted file mode 100644
index 77199c2c9..000000000
--- a/newlib/libc/stdio/fiprintf.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-FUNCTION
-        <<fiprintf>>---format output to file (integer only)
-INDEX
-	fiprintf
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-        int fiprintf(FILE *<[fd]>, const char *<[format]>, ...);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	int fiprintf(<[fd]>, <[format]> [, <[arg]>, ...]);
-	FILE *<[fd]>;
-	char *<[format]>;
-
-DESCRIPTION
-<<fiprintf>> is a restricted version of <<fprintf>>: it has the same
-arguments and behavior, save that it cannot perform any floating-point
-formatting---the <<f>>, <<g>>, <<G>>, <<e>>, and <<F>> type specifiers
-are not recognized.
-
-RETURNS
-        <<fiprintf>> returns the number of bytes in the output string,
-        save that the concluding <<NULL>> is not counted.
-        <<fiprintf>> returns when the end of the format string is
-        encountered.  If an error occurs, <<fiprintf>>
-        returns <<EOF>>.
-
-PORTABILITY
-<<fiprintf>> is not required by ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifdef _HAVE_STDC
-int
-fiprintf (FILE * fp, const char *fmt,...)
-#else
-int
-fiprintf (fp, fmt, va_alist)
-     FILE *fp;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfiprintf (fp, fmt, ap);
-  va_end (ap);
-  return ret;
-}
diff --git a/newlib/libc/stdio/flags.c b/newlib/libc/stdio/flags.c
deleted file mode 100644
index e448cca80..000000000
--- a/newlib/libc/stdio/flags.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* No user fns here. Pesch 15apr92 */
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <fcntl.h>
-
-#include <errno.h>
-#include <sys/types.h>
-
-/*
- * Return the (stdio) flags for a given mode.  Store the flags
- * to be passed to an open() syscall through *optr.
- * Return 0 on error.
- */
-
-int
-__sflags (ptr, mode, optr)
-     struct _reent *ptr;
-     register char *mode;
-     int *optr;
-{
-  register int ret, m, o;
-
-  switch (mode[0])
-    {
-    case 'r':			/* open for reading */
-      ret = __SRD;
-      m = O_RDONLY;
-      o = 0;
-      break;
-
-    case 'w':			/* open for writing */
-      ret = __SWR;
-      m = O_WRONLY;
-      o = O_CREAT | O_TRUNC;
-      break;
-
-    case 'a':			/* open for appending */
-      ret = __SWR | __SAPP;
-      m = O_WRONLY;
-      o = O_CREAT | O_APPEND;
-      break;
-    default:			/* illegal mode */
-      ptr->_errno = EINVAL;
-      return (0);
-    }
-  if (mode[1] && (mode[1] == '+' || mode[2] == '+'))
-    {
-      ret = __SRW;
-      m = O_RDWR;
-    }
-  if (mode[1] && (mode[1] == 'b' || mode[2] == 'b'))
-    {
-#ifdef O_BINARY
-      m |= O_BINARY;
-#endif
-    }
-#ifdef __CYGWIN__
-  else if (mode[1] && (mode[1] == 't' || mode[2] == 't'))
-#else
-  else
-#endif
-    {
-#ifdef O_TEXT
-      m |= O_TEXT;
-#endif
-    }
-  *optr = m | o;
-  return ret;
-}
diff --git a/newlib/libc/stdio/floatio.h b/newlib/libc/stdio/floatio.h
deleted file mode 100644
index 496721b88..000000000
--- a/newlib/libc/stdio/floatio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	%W% (Berkeley) %G%
- */
-
-/*
- * Floating point scanf/printf (input/output) definitions.
- */
-
-#ifdef _NO_LONGDBL
-/* 11-bit exponent (VAX G floating point) is 308 decimal digits */
-#define	MAXEXP		308
-#else  /* !_NO_LONGDBL */
-/* 15-bit exponent (Intel extended floating point) is 4932 decimal digits */
-#define MAXEXP          4932
-#endif /* !_NO_LONGDBL */
-/* 128 bit fraction takes up 39 decimal digits; max reasonable precision */
-#define	MAXFRACT	39
diff --git a/newlib/libc/stdio/fopen.c b/newlib/libc/stdio/fopen.c
deleted file mode 100644
index bcd2287c5..000000000
--- a/newlib/libc/stdio/fopen.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fopen>>---open a file
-
-INDEX
-	fopen
-INDEX
-	_fopen_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *fopen(const char *<[file]>, const char *<[mode]>);
-
-	FILE *_fopen_r(void *<[reent]>, 
-                       const char *<[file]>, const char *<[mode]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *fopen(<[file]>, <[mode]>)
-	char *<[file]>;
-	char *<[mode]>;
-
-	FILE *_fopen_r(<[reent]>, <[file]>, <[mode]>)
-	char *<[reent]>;
-	char *<[file]>;
-	char *<[mode]>;
-
-DESCRIPTION
-<<fopen>> initializes the data structures needed to read or write a
-file.  Specify the file's name as the string at <[file]>, and the kind
-of access you need to the file with the string at <[mode]>.
-
-The alternate function <<_fopen_r>> is a reentrant version.
-The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-Three fundamental kinds of access are available: read, write, and append.
-<<*<[mode]>>> must begin with one of the three characters `<<r>>',
-`<<w>>', or `<<a>>', to select one of these:
-
-o+
-o r
-Open the file for reading; the operation will fail if the file does
-not exist, or if the host system does not permit you to read it.
-
-o w
-Open the file for writing @emph{from the beginning} of the file:
-effectively, this always creates a new file.  If the file whose name you
-specified already existed, its old contents are discarded.
-
-o a
-Open the file for appending data, that is writing from the end of
-file.  When you open a file this way, all data always goes to the
-current end of file; you cannot change this using <<fseek>>.
-o-
-
-Some host systems distinguish between ``binary'' and ``text'' files.
-Such systems may perform data transformations on data written to, or
-read from, files opened as ``text''.
-If your system is one of these, then you can append a `<<b>>' to any
-of the three modes above, to specify that you are opening the file as
-a binary file (the default is to open the file as a text file).
-
-`<<rb>>', then, means ``read binary''; `<<wb>>', ``write binary''; and
-`<<ab>>', ``append binary''.
-
-To make C programs more portable, the `<<b>>' is accepted on all
-systems, whether or not it makes a difference.
-
-Finally, you might need to both read and write from the same file.
-You can also append a `<<+>>' to any of the three modes, to permit
-this.  (If you want to append both `<<b>>' and `<<+>>', you can do it
-in either order: for example, <<"rb+">> means the same thing as
-<<"r+b">> when used as a mode string.)
-
-Use <<"r+">> (or <<"rb+">>) to permit reading and writing anywhere in
-an existing file, without discarding any data; <<"w+">> (or <<"wb+">>)
-to create a new file (or begin by discarding all data from an old one)
-that permits reading and writing anywhere in it; and <<"a+">> (or
-<<"ab+">>) to permit reading anywhere in an existing file, but writing
-only at the end.
-
-RETURNS
-<<fopen>> returns a file pointer which you can use for other file
-operations, unless the file you requested could not be opened; in that
-situation, the result is <<NULL>>.  If the reason for failure was an
-invalid string at <[mode]>, <<errno>> is set to <<EINVAL>>.
-
-PORTABILITY
-<<fopen>> is required by ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<open>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <errno.h>
-#include "local.h"
-#ifdef __CYGWIN__
-#include <fcntl.h>
-#endif
-#include <sys/lock.h>
-
-FILE *
-_DEFUN (_fopen_r, (ptr, file, mode),
-	struct _reent *ptr _AND
-	_CONST char *file _AND
-	_CONST char *mode)
-{
-  register FILE *fp;
-  register int f;
-  int flags, oflags;
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    return NULL;
-  if ((fp = __sfp (ptr)) == NULL)
-    return NULL;
-
-  if ((f = _open_r (ptr, file, oflags, 0666)) < 0)
-    {
-      fp->_flags = 0;		/* release */
-      return NULL;
-    }
-
-  fp->_file = f;
-  fp->_flags = flags;
-  fp->_cookie = (_PTR) fp;
-  fp->_read = __sread;
-  fp->_write = __swrite;
-  fp->_seek = __sseek;
-  fp->_close = __sclose;
-
-  if (fp->_flags & __SAPP)
-    _fseek_r (ptr, fp, 0, SEEK_END);
-
-#ifdef __SCLE
-  if (__stextmode (fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-#ifndef __SINGLE_THREAD__
-  __lock_init_recursive (*(_LOCK_RECURSIVE_T *)&fp->_lock);
-#endif
-
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (fopen, (file, mode),
-	_CONST char *file _AND
-	_CONST char *mode)
-{
-  return _fopen_r (_REENT, file, mode);
-}
-
-#endif
diff --git a/newlib/libc/stdio/fprintf.c b/newlib/libc/stdio/fprintf.c
deleted file mode 100644
index 8f97a8b28..000000000
--- a/newlib/libc/stdio/fprintf.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifdef _HAVE_STDC
-int
-fprintf (FILE * fp, const char *fmt,...)
-#else
-int
-fprintf (fp, fmt, va_alist)
-     FILE *fp;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfprintf (fp, fmt, ap);
-  va_end (ap);
-  return ret;
-}
diff --git a/newlib/libc/stdio/fputc.c b/newlib/libc/stdio/fputc.c
deleted file mode 100644
index b945095e5..000000000
--- a/newlib/libc/stdio/fputc.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-FUNCTION
-<<fputc>>---write a character on a stream or file
-
-INDEX
-	fputc
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fputc(int <[ch]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fputc(<[ch]>, <[fp]>)
-	int <[ch]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<fputc>> converts the argument <[ch]> from an <<int>> to an
-<<unsigned char>>, then writes it to the file or stream identified by
-<[fp]>.
-
-If the file was opened with append mode (or if the stream cannot
-support positioning), then the new character goes at the end of the
-file or stream.  Otherwise, the new character is written at the
-current value of the position indicator, and the position indicator
-oadvances by one.
-
-For a macro version of this function, see <<putc>>.
-
-RETURNS
-If successful, <<fputc>> returns its argument <[ch]>.  If an error
-intervenes, the result is <<EOF>>.  You can use `<<ferror(<[fp]>)>>' to
-query for errors.
-
-PORTABILITY
-<<fputc>> is required by ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-
-int
-_DEFUN (fputc, (ch, file),
-	int ch _AND
-	FILE * file)
-{
-  int result;
-   _flockfile(file);
-  result = putc (ch, file);
-  _funlockfile(file);
-  return result;
-}
diff --git a/newlib/libc/stdio/fputs.c b/newlib/libc/stdio/fputs.c
deleted file mode 100644
index 78758ce93..000000000
--- a/newlib/libc/stdio/fputs.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fputs>>---write a character string in a file or stream
-
-INDEX
-	fputs
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fputs(const char *<[s]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fputs(<[s]>, <[fp]>)
-	char *<[s]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<fputs>> writes the string at <[s]> (but without the trailing null)
-to the file or stream identified by <[fp]>.
-
-RETURNS
-If successful, the result is <<0>>; otherwise, the result is <<EOF>>.
-
-PORTABILITY
-ANSI C requires <<fputs>>, but does not specify that the result on
-success must be <<0>>; any non-negative value is permitted.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#include <string.h>
-#include "fvwrite.h"
-
-/*
- * Write the given string to the given file.
- */
-
-int
-_DEFUN (fputs, (s, fp),
-	char _CONST * s _AND
-	FILE * fp)
-{
-  int result;
-  struct __suio uio;
-  struct __siov iov;
-
-  iov.iov_base = s;
-  iov.iov_len = uio.uio_resid = strlen (s);
-  uio.uio_iov = &iov;
-  uio.uio_iovcnt = 1;
-  _flockfile(fp);
-  result = __sfvwrite (fp, &uio);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/fread.c b/newlib/libc/stdio/fread.c
deleted file mode 100644
index faca53735..000000000
--- a/newlib/libc/stdio/fread.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fread>>---read array elements from a file
-
-INDEX
-	fread
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	size_t fread(void *<[buf]>, size_t <[size]>, size_t <[count]>,
-		     FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	size_t fread(<[buf]>, <[size]>, <[count]>, <[fp]>)
-	char *<[buf]>;
-	size_t <[size]>;
-	size_t <[count]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<fread>> attempts to copy, from the file or stream identified by
-<[fp]>, <[count]> elements (each of size <[size]>) into memory,
-starting at <[buf]>.   <<fread>> may copy fewer elements than
-<[count]> if an error, or end of file, intervenes.
-
-<<fread>> also advances the file position indicator (if any) for
-<[fp]> by the number of @emph{characters} actually read.
-
-RETURNS
-The result of <<fread>> is the number of elements it succeeded in
-reading.
-
-PORTABILITY
-ANSI C requires <<fread>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#include <string.h>
-#include "local.h"
-
-#ifdef __SCLE
-static size_t
-_DEFUN (crlf, (fp, buf, count, eof),
-        FILE * fp _AND
-        char * buf _AND
-        size_t count _AND
-        int eof)
-{
-  int newcount = 0, r;
-  char *s, *d, *e;
-
-  if (count == 0)
-    return 0;
-
-  e = buf + count;
-  for (s=d=buf; s<e-1; s++)
-    {
-      if (*s == '\r' && s[1] == '\n')
-        s++;
-      *d++ = *s;
-    }
-  if (s < e)
-    {
-      if (*s == '\r')
-        {
-          int c = __sgetc_raw(fp);
-          if (c == '\n')
-            *s = '\n';
-          else
-            ungetc(c, fp);
-        }
-      *d++ = *s++;
-    }
-
-
-  while (d < e)
-    {
-      r = getc(fp);
-      if (r == EOF)
-        return count - (e-d);
-      *d++ = r;
-    }
-
-  return count;
-  
-}
-
-#endif
-
-size_t
-_DEFUN (fread, (buf, size, count, fp),
-	_PTR buf _AND
-	size_t size _AND
-	size_t count _AND
-	FILE * fp)
-{
-  register size_t resid;
-  register char *p;
-  register int r;
-  size_t total;
-
-  if ((resid = count * size) == 0)
-    return 0;
-
-  _flockfile(fp);
-  if (fp->_r < 0)
-    fp->_r = 0;
-  total = resid;
-  p = buf;
-
-  while (resid > (r = fp->_r))
-    {
-      (void) memcpy ((void *) p, (void *) fp->_p, (size_t) r);
-      fp->_p += r;
-      /* fp->_r = 0 ... done in __srefill */
-      p += r;
-      resid -= r;
-      if (__srefill (fp))
-	{
-	  /* no more input: return partial result */
-#ifdef __SCLE
-          if (fp->_flags & __SCLE)
-            {
-              _funlockfile(fp);
-              return crlf(fp, buf, total-resid, 1) / size;
-            }
-#endif
-          _funlockfile(fp);
-	  return (total - resid) / size;
-	}
-    }
-  (void) memcpy ((void *) p, (void *) fp->_p, resid);
-  fp->_r -= resid;
-  fp->_p += resid;
-#ifdef __SCLE
-  if (fp->_flags & __SCLE)
-    {
-      _funlockfile(fp);
-      return crlf(fp, buf, total, 0) / size;
-    }
-#endif
-  _funlockfile(fp);
-  return count;
-}
diff --git a/newlib/libc/stdio/freopen.c b/newlib/libc/stdio/freopen.c
deleted file mode 100644
index 9010adcf7..000000000
--- a/newlib/libc/stdio/freopen.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<freopen>>---open a file using an existing file descriptor
-
-INDEX
-	freopen
-INDEX
-	_freopen_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *freopen(const char *<[file]>, const char *<[mode]>,
-		      FILE *<[fp]>);
-	FILE *_freopen_r(struct _reent *<[ptr]>, const char *<[file]>, 
-	              const char *<[mode]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *freopen(<[file]>, <[mode]>, <[fp]>)
-	char *<[file]>;
-	char *<[mode]>;
-	FILE *<[fp]>;
-
-	FILE *_freopen_r(<[ptr]>, <[file]>, <[mode]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-	char *<[mode]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-Use this variant of <<fopen>> if you wish to specify a particular file
-descriptor <[fp]> (notably <<stdin>>, <<stdout>>, or <<stderr>>) for
-the file.
-
-If <[fp]> was associated with another file or stream, <<freopen>>
-closes that other file or stream (but ignores any errors while closing
-it).
-
-<[file]> and <[mode]> are used just as in <<fopen>>.
-
-RETURNS
-If successful, the result is the same as the argument <[fp]>.  If the
-file cannot be opened as specified, the result is <<NULL>>.
-
-PORTABILITY
-ANSI C requires <<freopen>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<open>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <time.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include "local.h"
-
-/*
- * Re-direct an existing, open (probably) file to some other file.
- */
-
-FILE *
-_DEFUN (_freopen_r, (ptr, file, mode, fp),
-	struct _reent *ptr _AND
-	_CONST char *file _AND
-	_CONST char *mode _AND
-	register FILE *fp)
-{
-  register int f;
-  int flags, oflags, e;
-
-  _flockfile(fp);
-
-  CHECK_INIT (fp);
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    {
-      (void) fclose (fp);
-      _funlockfile(fp);
-      return NULL;
-    }
-
-  /*
-   * Remember whether the stream was open to begin with, and
-   * which file descriptor (if any) was associated with it.
-   * If it was attached to a descriptor, defer closing it,
-   * so that, e.g., freopen("/dev/stdin", "r", stdin) works.
-   * This is unnecessary if it was not a Unix file.
-   */
-
-  if (fp->_flags == 0)
-    fp->_flags = __SEOF;	/* hold on to it */
-  else
-    {
-      if (fp->_flags & __SWR)
-	(void) fflush (fp);
-      /* if close is NULL, closing is a no-op, hence pointless */
-      if (fp->_close != NULL)
-	(void) (*fp->_close) (fp->_cookie);
-    }
-
-  /*
-   * Now get a new descriptor to refer to the new file.
-   */
-
-  f = _open_r (ptr, (char *) file, oflags, 0666);
-  e = ptr->_errno;
-
-  /*
-   * Finish closing fp.  Even if the open succeeded above,
-   * we cannot keep fp->_base: it may be the wrong size.
-   * This loses the effect of any setbuffer calls,
-   * but stdio has always done this before.
-   */
-
-  if (fp->_flags & __SMBF)
-    _free_r (ptr, (char *) fp->_bf._base);
-  fp->_w = 0;
-  fp->_r = 0;
-  fp->_p = NULL;
-  fp->_bf._base = NULL;
-  fp->_bf._size = 0;
-  fp->_lbfsize = 0;
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_ub._size = 0;
-  if (HASLB (fp))
-    FREELB (fp);
-  fp->_lb._size = 0;
-
-  if (f < 0)
-    {				/* did not get it after all */
-      fp->_flags = 0;		/* set it free */
-      ptr->_errno = e;		/* restore in case _close clobbered */
-      _funlockfile(fp);
-      return NULL;
-    }
-
-  fp->_flags = flags;
-  fp->_file = f;
-  fp->_cookie = (_PTR) fp;
-  fp->_read = __sread;
-  fp->_write = __swrite;
-  fp->_seek = __sseek;
-  fp->_close = __sclose;
-
-#ifdef __SCLE
-  if (__stextmode(fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-  _funlockfile(fp);
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (freopen, (file, mode, fp),
-	_CONST char *file _AND
-	_CONST char *mode _AND
-	register FILE *fp)
-{
-  return _freopen_r (_REENT, file, mode, fp);
-}
-
-#endif /*!_REENT_ONLY */
diff --git a/newlib/libc/stdio/fscanf.c b/newlib/libc/stdio/fscanf.c
deleted file mode 100644
index 92fc4ea7e..000000000
--- a/newlib/libc/stdio/fscanf.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#include "local.h"
-
-#ifndef _REENT_ONLY
-
-int
-#ifdef _HAVE_STDC
-fscanf (FILE *fp, const char *fmt, ...)
-#else
-fscanf (FILE *fp, fmt, va_alist)
-     FILE *fp;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (_REENT, fp, fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-#ifdef _HAVE_STDC
-_fscanf_r (struct _reent *ptr, FILE *fp, const char *fmt, ...)
-#else
-_fscanf_r (ptr, FILE *fp, fmt, va_alist)
-     struct _reent *ptr;
-     FILE *fp;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (ptr, fp, fmt, ap);
-  va_end (ap);
-  return (ret);
-}
-
diff --git a/newlib/libc/stdio/fseek.c b/newlib/libc/stdio/fseek.c
deleted file mode 100644
index 4747e2156..000000000
--- a/newlib/libc/stdio/fseek.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fseek>>, <<fseeko>>---set file position
-
-INDEX
-	fseek
-INDEX
-	fseeko
-INDEX
-	_fseek_r
-INDEX
-	_fseeko_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fseek(FILE *<[fp]>, long <[offset]>, int <[whence]>)
-	int fseeko(FILE *<[fp]>, off_t <[offset]>, int <[whence]>)
-	int _fseek_r(struct _reent *<[ptr]>, FILE *<[fp]>, 
-	             long <[offset]>, int <[whence]>)
-	int _fseeko_r(struct _reent *<[ptr]>, FILE *<[fp]>, 
-	             off_t <[offset]>, int <[whence]>)
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fseek(<[fp]>, <[offset]>, <[whence]>)
-	FILE *<[fp]>;
-	long <[offset]>;
-	int <[whence]>;
-
-	int fseeko(<[fp]>, <[offset]>, <[whence]>)
-	FILE *<[fp]>;
-	off_t <[offset]>;
-	int <[whence]>;
-
-	int _fseek_r(<[ptr]>, <[fp]>, <[offset]>, <[whence]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	long <[offset]>;
-	int <[whence]>;
-
-	int _fseeko_r(<[ptr]>, <[fp]>, <[offset]>, <[whence]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	off_t <[offset]>;
-	int <[whence]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fseek>>/<<fseeko>> to set the position for the file identified by
-<[fp]>.  The value of <[offset]> determines the new position, in one
-of three ways selected by the value of <[whence]> (defined as macros
-in `<<stdio.h>>'):
-
-<<SEEK_SET>>---<[offset]> is the absolute file position (an offset
-from the beginning of the file) desired.  <[offset]> must be positive.
-
-<<SEEK_CUR>>---<[offset]> is relative to the current file position.
-<[offset]> can meaningfully be either positive or negative.
-
-<<SEEK_END>>---<[offset]> is relative to the current end of file.
-<[offset]> can meaningfully be either positive (to increase the size
-of the file) or negative.
-
-See <<ftell>>/<<ftello>> to determine the current file position.
-
-RETURNS
-<<fseek>>/<<fseeko>> return <<0>> when successful.  On failure, the
-result is <<EOF>>.  The reason for failure is indicated in <<errno>>:
-either <<ESPIPE>> (the stream identified by <[fp]> doesn't support
-repositioning) or <<EINVAL>> (invalid file position).
-
-PORTABILITY
-ANSI C requires <<fseek>>.
-
-<<fseeko>> is defined by the Single Unix specification.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#include <time.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include "local.h"
-
-#define	POS_ERR	(-(_fpos_t)1)
-
-/*
- * Seek the given file to the given offset.
- * `Whence' must be one of the three SEEK_* macros.
- */
-
-int
-_DEFUN (_fseek_r, (ptr, fp, offset, whence),
-     struct _reent *ptr _AND
-     register FILE *fp _AND
-     long offset _AND
-     int whence)
-{
-  _fpos_t _EXFUN ((*seekfn), (void *, _fpos_t, int));
-  _fpos_t target, curoff;
-  size_t n;
-  struct stat st;
-  int havepos;
-
-  _flockfile(fp);
-
-  /* Make sure stdio is set up.  */
-
-  CHECK_INIT (fp);
-
-  /* If we've been doing some writing, and we're in append mode
-     then we don't really know where the filepos is.  */
-
-  if (fp->_flags & __SAPP && fp->_flags & __SWR)
-    {
-      /* So flush the buffer and seek to the end.  */
-      fflush (fp);
-    }
-
-  /* Have to be able to seek.  */
-
-  if ((seekfn = fp->_seek) == NULL)
-    {
-      ptr->_errno = ESPIPE;	/* ??? */
-      _funlockfile(fp);
-      return EOF;
-    }
-
-  /*
-   * Change any SEEK_CUR to SEEK_SET, and check `whence' argument.
-   * After this, whence is either SEEK_SET or SEEK_END.
-   */
-
-  switch (whence)
-    {
-    case SEEK_CUR:
-      /*
-       * In order to seek relative to the current stream offset,
-       * we have to first find the current stream offset a la
-       * ftell (see ftell for details).
-       */
-      fflush(fp);   /* may adjust seek offset on append stream */
-      if (fp->_flags & __SOFF)
-	curoff = fp->_offset;
-      else
-	{
-	  curoff = (*seekfn) (fp->_cookie, (_fpos_t) 0, SEEK_CUR);
-	  if (curoff == -1L)
-	    {
-	      _funlockfile(fp);
-	      return EOF;
-	    }
-	}
-      if (fp->_flags & __SRD)
-	{
-	  curoff -= fp->_r;
-	  if (HASUB (fp))
-	    curoff -= fp->_ur;
-	}
-      else if (fp->_flags & __SWR && fp->_p != NULL)
-	curoff += fp->_p - fp->_bf._base;
-
-      offset += curoff;
-      whence = SEEK_SET;
-      havepos = 1;
-      break;
-
-    case SEEK_SET:
-    case SEEK_END:
-      havepos = 0;
-      break;
-
-    default:
-      ptr->_errno = EINVAL;
-      _funlockfile(fp);
-      return (EOF);
-    }
-
-  /*
-   * Can only optimise if:
-   *	reading (and not reading-and-writing);
-   *	not unbuffered; and
-   *	this is a `regular' Unix file (and hence seekfn==__sseek).
-   * We must check __NBF first, because it is possible to have __NBF
-   * and __SOPT both set.
-   */
-
-  if (fp->_bf._base == NULL)
-    __smakebuf (fp);
-  if (fp->_flags & (__SWR | __SRW | __SNBF | __SNPT))
-    goto dumb;
-  if ((fp->_flags & __SOPT) == 0)
-    {
-      if (seekfn != __sseek
-	  || fp->_file < 0
-#ifdef __USE_INTERNAL_STAT64
-	  || _fstat64_r (ptr, fp->_file, &st)
-#else
-	  || _fstat_r (ptr, fp->_file, &st)
-#endif
-	  || (st.st_mode & S_IFMT) != S_IFREG)
-	{
-	  fp->_flags |= __SNPT;
-	  goto dumb;
-	}
-#ifdef	HAVE_BLKSIZE
-      fp->_blksize = st.st_blksize;
-#else
-      fp->_blksize = 1024;
-#endif
-      fp->_flags |= __SOPT;
-    }
-
-  /*
-   * We are reading; we can try to optimise.
-   * Figure out where we are going and where we are now.
-   */
-
-  if (whence == SEEK_SET)
-    target = offset;
-  else
-    {
-#ifdef __USE_INTERNAL_STAT64
-      if (_fstat64_r (ptr, fp->_file, &st))
-#else
-      if (_fstat_r (ptr, fp->_file, &st))
-#endif
-	goto dumb;
-      target = st.st_size + offset;
-    }
-
-  if (!havepos)
-    {
-      if (fp->_flags & __SOFF)
-	curoff = fp->_offset;
-      else
-	{
-	  curoff = (*seekfn) (fp->_cookie, 0L, SEEK_CUR);
-	  if (curoff == POS_ERR)
-	    goto dumb;
-	}
-      curoff -= fp->_r;
-      if (HASUB (fp))
-	curoff -= fp->_ur;
-    }
-
-  /*
-   * Compute the number of bytes in the input buffer (pretending
-   * that any ungetc() input has been discarded).  Adjust current
-   * offset backwards by this count so that it represents the
-   * file offset for the first byte in the current input buffer.
-   */
-
-  if (HASUB (fp))
-    {
-      curoff += fp->_r;       /* kill off ungetc */
-      n = fp->_up - fp->_bf._base;
-      curoff -= n;
-      n += fp->_ur;
-    }
-  else
-    {
-      n = fp->_p - fp->_bf._base;
-      curoff -= n;
-      n += fp->_r;
-    }
-
-  /*
-   * If the target offset is within the current buffer,
-   * simply adjust the pointers, clear EOF, undo ungetc(),
-   * and return.  (If the buffer was modified, we have to
-   * skip this; see fgetline.c.)
-   */
-
-  if ((fp->_flags & __SMOD) == 0 &&
-      target >= curoff && target < curoff + n)
-    {
-      register int o = target - curoff;
-
-      fp->_p = fp->_bf._base + o;
-      fp->_r = n - o;
-      if (HASUB (fp))
-	FREEUB (fp);
-      fp->_flags &= ~__SEOF;
-      _funlockfile(fp);
-      return 0;
-    }
-
-  /*
-   * The place we want to get to is not within the current buffer,
-   * but we can still be kind to the kernel copyout mechanism.
-   * By aligning the file offset to a block boundary, we can let
-   * the kernel use the VM hardware to map pages instead of
-   * copying bytes laboriously.  Using a block boundary also
-   * ensures that we only read one block, rather than two.
-   */
-
-  curoff = target & ~(fp->_blksize - 1);
-  if ((*seekfn) (fp->_cookie, curoff, SEEK_SET) == POS_ERR)
-    goto dumb;
-  fp->_r = 0;
-  fp->_p = fp->_bf._base;
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_flags &= ~__SEOF;
-  n = target - curoff;
-  if (n)
-    {
-      if (__srefill (fp) || fp->_r < n)
-	goto dumb;
-      fp->_p += n;
-      fp->_r -= n;
-    }
-  _funlockfile(fp);
-  return 0;
-
-  /*
-   * We get here if we cannot optimise the seek ... just
-   * do it.  Allow the seek function to change fp->_bf._base.
-   */
-
-dumb:
-  if (fflush (fp) || (*seekfn) (fp->_cookie, offset, whence) == POS_ERR)
-    {
-      _funlockfile(fp);
-      return EOF;
-    }
-  /* success: clear EOF indicator and discard ungetc() data */
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_p = fp->_bf._base;
-  fp->_r = 0;
-  /* fp->_w = 0; *//* unnecessary (I think...) */
-  fp->_flags &= ~__SEOF;
-  _funlockfile(fp);
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (fseek, (fp, offset, whence),
-     register FILE *fp _AND
-     long offset _AND
-     int whence)
-{
-  return _fseek_r (_REENT, fp, offset, whence);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/fseeko.c b/newlib/libc/stdio/fseeko.c
deleted file mode 100644
index 62a9d43be..000000000
--- a/newlib/libc/stdio/fseeko.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 2002, Red Hat Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-
-int
-_DEFUN (_fseeko_r, (ptr, fp, offset, whence),
-        struct _reent *ptr _AND
-        register FILE *fp _AND
-        _off_t offset _AND
-        int whence)
-{
-  return _fseek_r (ptr, fp, (long)offset, whence);
-}
-
-#ifndef _REENT_ONLY
-
-int
-fseeko (fp, offset, whence)
-        register FILE *fp;
-        _off_t offset;
-        int whence;
-{
-  /* for now we simply cast since off_t should be long */
-  return _fseek_r (_REENT, fp, (long)offset, whence);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/fsetpos.c b/newlib/libc/stdio/fsetpos.c
deleted file mode 100644
index 75f719b22..000000000
--- a/newlib/libc/stdio/fsetpos.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-FUNCTION
-<<fsetpos>>---restore position of a stream or file
-
-INDEX
-	fsetpos
-INDEX
-	_fsetpos_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fsetpos(FILE *<[fp]>, const fpos_t *<[pos]>);
-	int _fsetpos_r(struct _reent *<[ptr]>, FILE *<[fp]>, l
-	               const fpos_t *<[pos]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fsetpos(<[fp]>, <[pos]>)
-	FILE *<[fp]>;
-	fpos_t *<[pos]>;
-
-	int _fsetpos_r(<[ptr]>, <[fp]>, <[pos]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	fpos_t *<[pos]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fsetpos>> to return the file identified by <[fp]> to a previous
-position <<*<[pos]>>> (after first recording it with <<fgetpos>>).
-
-See <<fseek>> for a similar facility.
-
-RETURNS
-<<fgetpos>> returns <<0>> when successful.  If <<fgetpos>> fails, the
-result is <<1>>.  The reason for failure is indicated in <<errno>>:
-either <<ESPIPE>> (the stream identified by <[fp]> doesn't support
-repositioning) or <<EINVAL>> (invalid file position).
-
-PORTABILITY
-ANSI C requires <<fsetpos>>, but does not specify the nature of
-<<*<[pos]>>> beyond identifying it as written by <<fgetpos>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-
-int
-_DEFUN (_fsetpos_r, (ptr, iop, pos),
-	struct _reent * ptr _AND
-	FILE * iop _AND
-	_CONST _fpos_t * pos)
-{
-  int x = _fseek_r (ptr, iop, *pos, SEEK_SET);
-
-  if (x != 0)
-    return 1;
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (fsetpos, (iop, pos),
-	FILE * iop _AND
-	_CONST _fpos_t * pos)
-{
-  return _fsetpos_r (_REENT, iop, pos);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/ftell.c b/newlib/libc/stdio/ftell.c
deleted file mode 100644
index 1df856366..000000000
--- a/newlib/libc/stdio/ftell.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<ftell>>, <<ftello>>---return position in a stream or file
-
-INDEX
-	ftell
-INDEX
-	ftello
-INDEX
-	_ftell_r
-INDEX
-	_ftello_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	long ftell(FILE *<[fp]>);
-	off_t ftello(FILE *<[fp]>);
-	long _ftell_r(struct _reent *<[ptr]>, FILE *<[fp]>);
-	off_t _ftello_r(struct _reent *<[ptr]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	long ftell(<[fp]>)
-	FILE *<[fp]>;
-
-	off_t ftello(<[fp]>)
-	FILE *<[fp]>;
-
-	long _ftell_r(<[ptr]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-
-	off_t _ftello_r(<[ptr]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-The result of <<ftell>>/<<ftello>> is the current position for a file
-identified by <[fp]>.  If you record this result, you can later
-use it with <<fseek>>/<<fseeko>> to return the file to this
-position.  The difference between <<ftell>> and <<ftello>> is that
-<<ftell>> returns <<long>> and <<ftello>> returns <<off_t>>.
-
-In the current implementation, <<ftell>>/<<ftello>> simply uses a character
-count to represent the file position; this is the same number that
-would be recorded by <<fgetpos>>.
-
-RETURNS
-<<ftell>>/<<ftello>> return the file position, if possible.  If they cannot do
-this, they return <<-1L>>.  Failure occurs on streams that do not support
-positioning; the global <<errno>> indicates this condition with the
-value <<ESPIPE>>.
-
-PORTABILITY
-<<ftell>> is required by the ANSI C standard, but the meaning of its
-result (when successful) is not specified beyond requiring that it be
-acceptable as an argument to <<fseek>>.  In particular, other
-conforming C implementations may return a different result from
-<<ftell>> than what <<fgetpos>> records.
-
-<<ftello>> is defined by the Single Unix specification.
-
-No supporting OS subroutines are required.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * ftell: return current offset.
- */
-
-#include <stdio.h>
-#include <errno.h>
-
-#include "local.h"
-
-long
-_DEFUN (_ftell_r, (ptr, fp),
-	struct _reent *ptr _AND
-	register FILE * fp)
-{
-  _fpos_t pos;
-
-  _flockfile(fp);
-
-  /* Ensure stdio is set up.  */
-
-  CHECK_INIT (fp);
-
-  if (fp->_seek == NULL)
-    {
-      ptr->_errno = ESPIPE;
-      _funlockfile(fp);
-      return -1L;
-    }
-
-  /* Find offset of underlying I/O object, then
-     adjust for buffered bytes.  */
-  fflush(fp);           /* may adjust seek offset on append stream */
-  if (fp->_flags & __SOFF)
-    pos = fp->_offset;
-  else
-    {
-      pos = (*fp->_seek) (fp->_cookie, (_fpos_t) 0, SEEK_CUR);
-      if (pos == -1L)
-        {
-          _funlockfile(fp);
-          return pos;
-        }
-    }
-  if (fp->_flags & __SRD)
-    {
-      /*
-       * Reading.  Any unread characters (including
-       * those from ungetc) cause the position to be
-       * smaller than that in the underlying object.
-       */
-      pos -= fp->_r;
-      if (HASUB (fp))
-	pos -= fp->_ur;
-    }
-  else if (fp->_flags & __SWR && fp->_p != NULL)
-    {
-      /*
-       * Writing.  Any buffered characters cause the
-       * position to be greater than that in the
-       * underlying object.
-       */
-      pos += fp->_p - fp->_bf._base;
-    }
-
-  _funlockfile(fp);
-  return pos;
-}
-
-#ifndef _REENT_ONLY
-
-long
-_DEFUN (ftell, (fp),
-	register FILE * fp)
-{
-  return _ftell_r (_REENT, fp);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/ftello.c b/newlib/libc/stdio/ftello.c
deleted file mode 100644
index 918883cf0..000000000
--- a/newlib/libc/stdio/ftello.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2002, Red Hat Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-
-_off_t
-_DEFUN (_ftello_r, (ptr, fp),
-	struct _reent * ptr _AND
-	register FILE * fp)
-{
-  /* for now we simply cast since off_t should be long */
-  return (_off_t)_ftell_r (ptr, fp);
-}
-
-#ifndef _REENT_ONLY
-
-_off_t
-_DEFUN (ftello, (fp),
-	register FILE * fp)
-{
-  return (_off_t)_ftell_r (_REENT, fp);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/fvwrite.c b/newlib/libc/stdio/fvwrite.c
deleted file mode 100644
index aaf3a192e..000000000
--- a/newlib/libc/stdio/fvwrite.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include "local.h"
-#include "fvwrite.h"
-
-#define	MIN(a, b) ((a) < (b) ? (a) : (b))
-#define	COPY(n)	  (void) memmove((void *) fp->_p, (void *) p, (size_t) (n))
-
-#define GETIOV(extra_work) \
-  while (len == 0) \
-    { \
-      extra_work; \
-      p = iov->iov_base; \
-      len = iov->iov_len; \
-      iov++; \
-    }
-
-/*
- * Write some memory regions.  Return zero on success, EOF on error.
- *
- * This routine is large and unsightly, but most of the ugliness due
- * to the three different kinds of output buffering is handled here.
- */
-
-int
-__sfvwrite (fp, uio)
-     register FILE *fp;
-     register struct __suio *uio;
-{
-  register size_t len;
-  register _CONST char *p;
-  register struct __siov *iov;
-  register int w, s;
-  char *nl;
-  int nlknown, nldist;
-
-  if ((len = uio->uio_resid) == 0)
-    return 0;
-
-  /* make sure we can write */
-  if (cantwrite (fp))
-    return EOF;
-
-  iov = uio->uio_iov;
-  len = 0;
-
-#ifdef __SCLE
-  if (fp->_flags & __SCLE) /* text mode */
-    {
-      do
-        {
-          GETIOV (;);
-          while (len > 0)
-            {
-              if (putc(*p, fp) == EOF)
-                return EOF;
-              p++;
-              len--;
-              uio->uio_resid--;
-            }
-        }
-      while (uio->uio_resid > 0);
-      return 0;
-    }
-#endif
-
-  if (fp->_flags & __SNBF)
-    {
-      /*
-       * Unbuffered: write up to BUFSIZ bytes at a time.
-       */
-      do
-	{
-	  GETIOV (;);
-	  w = (*fp->_write) (fp->_cookie, p, MIN (len, BUFSIZ));
-	  if (w <= 0)
-	    goto err;
-	  p += w;
-	  len -= w;
-	}
-      while ((uio->uio_resid -= w) != 0);
-    }
-  else if ((fp->_flags & __SLBF) == 0)
-    {
-      /*
-       * Fully buffered: fill partially full buffer, if any,
-       * and then flush.  If there is no partial buffer, write
-       * one _bf._size byte chunk directly (without copying).
-       *
-       * String output is a special case: write as many bytes
-       * as fit, but pretend we wrote everything.  This makes
-       * snprintf() return the number of bytes needed, rather
-       * than the number used, and avoids its write function
-       * (so that the write function can be invalid).  If
-       * we are dealing with the asprintf routines, we will
-       * dynamically increase the buffer size as needed.
-       */
-      do
-	{
-	  GETIOV (;);
-	  w = fp->_w;
-	  if (fp->_flags & __SSTR)
-	    {
-	      if (len > w && fp->_flags & __SMBF)
-		{ /* must be asprintf family */
-		  unsigned char *ptr;
-		  int curpos = (fp->_p - fp->_bf._base);
-		  ptr = (unsigned char *)_realloc_r (_REENT, 
-                                                     fp->_bf._base, 
-                                                     curpos + len);
-		  if (!ptr)
-		    goto err;
-		  fp->_bf._base = ptr;
-		  fp->_p = ptr + curpos;
-		  fp->_bf._size = curpos + len;
-		  w = fp->_w = len;
-		}
-	      if (len < w)
-		w = len;
-	      COPY (w);		/* copy MIN(fp->_w,len), */
-	      fp->_w -= w;
-	      fp->_p += w;
-	      w = len;		/* but pretend copied all */
-	    }
-	  else if (fp->_p > fp->_bf._base && len > w)
-	    {
-	      /* fill and flush */
-	      COPY (w);
-	      /* fp->_w -= w; *//* unneeded */
-	      fp->_p += w;
-	      if (fflush (fp))
-		goto err;
-	    }
-	  else if (len >= (w = fp->_bf._size))
-	    {
-	      /* write directly */
-	      w = (*fp->_write) (fp->_cookie, p, w);
-	      if (w <= 0)
-		goto err;
-	    }
-	  else
-	    {
-	      /* fill and done */
-	      w = len;
-	      COPY (w);
-	      fp->_w -= w;
-	      fp->_p += w;
-	    }
-	  p += w;
-	  len -= w;
-	}
-      while ((uio->uio_resid -= w) != 0);
-    }
-  else
-    {
-      /*
-       * Line buffered: like fully buffered, but we
-       * must check for newlines.  Compute the distance
-       * to the first newline (including the newline),
-       * or `infinity' if there is none, then pretend
-       * that the amount to write is MIN(len,nldist).
-       */
-      nlknown = 0;
-      do
-	{
-	  GETIOV (nlknown = 0);
-	  if (!nlknown)
-	    {
-	      nl = memchr ((void *) p, '\n', len);
-	      nldist = nl ? nl + 1 - p : len + 1;
-	      nlknown = 1;
-	    }
-	  s = MIN (len, nldist);
-	  w = fp->_w + fp->_bf._size;
-	  if (fp->_p > fp->_bf._base && s > w)
-	    {
-	      COPY (w);
-	      /* fp->_w -= w; */
-	      fp->_p += w;
-	      if (fflush (fp))
-		goto err;
-	    }
-	  else if (s >= (w = fp->_bf._size))
-	    {
-	      w = (*fp->_write) (fp->_cookie, p, w);
-	      if (w <= 0)
-		goto err;
-	    }
-	  else
-	    {
-	      w = s;
-	      COPY (w);
-	      fp->_w -= w;
-	      fp->_p += w;
-	    }
-	  if ((nldist -= w) == 0)
-	    {
-	      /* copied the newline: flush and forget */
-	      if (fflush (fp))
-		goto err;
-	      nlknown = 0;
-	    }
-	  p += w;
-	  len -= w;
-	}
-      while ((uio->uio_resid -= w) != 0);
-    }
-  return 0;
-
-err:
-  fp->_flags |= __SERR;
-  return EOF;
-}
diff --git a/newlib/libc/stdio/fvwrite.h b/newlib/libc/stdio/fvwrite.h
deleted file mode 100644
index f27abdf81..000000000
--- a/newlib/libc/stdio/fvwrite.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* %W% (Berkeley) %G% */
-#include <_ansi.h>
-
-/*
- * I/O descriptors for __sfvwrite().
- */
-struct __siov {
-	_CONST _PTR     iov_base;
-	size_t	iov_len;
-};
-struct __suio {
-	struct	__siov *uio_iov;
-	int	uio_iovcnt;
-	int	uio_resid;
-};
-
-
-extern int _EXFUN(__sfvwrite,(FILE *, struct __suio *));
-extern int _EXFUN(__swsetup,(FILE *));
-
-
diff --git a/newlib/libc/stdio/fwalk.c b/newlib/libc/stdio/fwalk.c
deleted file mode 100644
index 516283466..000000000
--- a/newlib/libc/stdio/fwalk.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include "local.h"
-
-int
-_fwalk (ptr, function)
-     struct _reent *ptr;
-     register int (*function) ();
-{
-  register FILE *fp;
-  register int n, ret = 0;
-  register struct _glue *g;
-
-  for (g = &ptr->__sglue; g != NULL; g = g->_next)
-    for (fp = g->_iobs, n = g->_niobs; --n >= 0; fp++)
-      if (fp->_flags != 0)
-	ret |= (*function) (fp);
-  return ret;
-}
diff --git a/newlib/libc/stdio/fwrite.c b/newlib/libc/stdio/fwrite.c
deleted file mode 100644
index 1c91632b8..000000000
--- a/newlib/libc/stdio/fwrite.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fwrite>>---write array elements
-
-INDEX
-	fwrite
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	size_t fwrite(const void *<[buf]>, size_t <[size]>,
-		      size_t <[count]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	size_t fwrite(<[buf]>, <[size]>, <[count]>, <[fp]>)
-	char *<[buf]>;
-	size_t <[size]>;
-	size_t <[count]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<fwrite>> attempts to copy, starting from the memory location
-<[buf]>, <[count]> elements (each of size <[size]>) into the file or
-stream identified by <[fp]>.  <<fwrite>> may copy fewer elements than
-<[count]> if an error intervenes.
-
-<<fwrite>> also advances the file position indicator (if any) for
-<[fp]> by the number of @emph{characters} actually written.
-
-RETURNS
-If <<fwrite>> succeeds in writing all the elements you specify, the
-result is the same as the argument <[count]>.  In any event, the
-result is the number of complete elements that <<fwrite>> copied to
-the file.
-
-PORTABILITY
-ANSI C requires <<fwrite>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <string.h>
-#if 0
-#include <sys/stdc.h>
-#endif
-#include "local.h"
-#if 1
-#include "fvwrite.h"
-#endif
-
-/*
- * Write `count' objects (each size `size') from memory to the given file.
- * Return the number of whole objects written.
- */
-
-size_t
-_DEFUN (fwrite, (buf, size, count, fp),
-	_CONST _PTR buf _AND
-	size_t size _AND
-	size_t count _AND
-	FILE * fp)
-{
-  size_t n;
-  struct __suio uio;
-  struct __siov iov;
-
-  iov.iov_base = buf;
-  uio.uio_resid = iov.iov_len = n = count * size;
-  uio.uio_iov = &iov;
-  uio.uio_iovcnt = 1;
-
-  /*
-   * The usual case is success (__sfvwrite returns 0);
-   * skip the divide if this happens, since divides are
-   * generally slow and since this occurs whenever size==0.
-   */
-
-  _flockfile(fp);
-  if (__sfvwrite (fp, &uio) == 0)
-    {
-      _funlockfile(fp);
-      return count;
-    }
-  _funlockfile(fp);
-  return (n - uio.uio_resid) / size;
-}
diff --git a/newlib/libc/stdio/getc.c b/newlib/libc/stdio/getc.c
deleted file mode 100644
index f7a2cac5a..000000000
--- a/newlib/libc/stdio/getc.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<getc>>---read a character (macro)
-
-INDEX
-	getc
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int getc(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int getc(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<getc>> is a macro, defined in <<stdio.h>>.  You can use <<getc>>
-to get the next single character from the file or stream
-identified by <[fp]>.  As a side effect, <<getc>> advances the file's
-current position indicator.
-
-For a subroutine version of this macro, see <<fgetc>>.
-
-RETURNS
-The next character (read as an <<unsigned char>>, and cast to
-<<int>>), unless there is no more data, or the host system reports a
-read error; in either of these situations, <<getc>> returns <<EOF>>.
-
-You can distinguish the two situations that cause an <<EOF>> result by
-using the <<ferror>> and <<feof>> functions.
-
-PORTABILITY
-ANSI C requires <<getc>>; it suggests, but does not require, that
-<<getc>> be implemented as a macro.  The standard explicitly permits
-macro implementations of <<getc>> to use the argument more than once;
-therefore, in a portable program, you should not use an expression
-with side effects as the <<getc>> argument.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-/*
- * A subroutine version of the macro getc.
- */
-
-#undef getc
-
-int
-getc (fp)
-     register FILE *fp;
-{
-  int result;
-  _flockfile(fp);
-  /* CHECK_INIT is called (eventually) by __srefill.  */
-  result = __sgetc (fp);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/getc_u.c b/newlib/libc/stdio/getc_u.c
deleted file mode 100644
index 877c7f8a0..000000000
--- a/newlib/libc/stdio/getc_u.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<getc_unlocked>>---non-thread-safe version of getc (macro)
-
-INDEX
-	getc_unlocked
-
-POSIX_SYNOPSIS
-	#include <stdio.h>
-	int getc_unlocked(FILE *<[fp]>);
-
-DESCRIPTION
-<<getc_unlocked>> is a non-thread-safe version of <<getc>> declared in
-<<stdio.h>>.  <<getc_unlocked>> may only safely be used within a scope
-protected by flockfile() (or ftrylockfile()) and funlockfile().  These
-functions may safely be used in a multi-threaded program if and only
-if they are called while the invoking thread owns the ( FILE *)
-object, as is the case after a successful call to the flockfile() or
-ftrylockfile() functions.  If threads are disabled, then
-<<getc_unlocked>> is equivalent to <<getc>>.
-
-RETURNS
-See <<getc>>.
-
-PORTABILITY
-POSIX 1003.1 requires <<getc_unlocked>>.  <<getc_unlocked>> may be
-implemented as a macro, so arguments should not have side-effects.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-/*
- * A subroutine version of the macro getc_unlocked.
- */
-
-#undef getc_unlocked
-
-int
-getc_unlocked (fp)
-     register FILE *fp;
-{
-  /* CHECK_INIT is called (eventually) by __srefill.  */
-
-  return __sgetc (fp);
-}
diff --git a/newlib/libc/stdio/getchar.c b/newlib/libc/stdio/getchar.c
deleted file mode 100644
index 345932666..000000000
--- a/newlib/libc/stdio/getchar.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<getchar>>---read a character (macro)
-
-INDEX
-	getchar
-INDEX
-	_getchar_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int getchar(void);
-
-	int _getchar_r(void *<[reent]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int getchar();
-
-	int _getchar_r(<[reent]>)
-	char * <[reent]>;
-
-DESCRIPTION
-<<getchar>> is a macro, defined in <<stdio.h>>.  You can use <<getchar>>
-to get the next single character from the standard input stream.
-As a side effect, <<getchar>> advances the standard input's
-current position indicator.
-
-The alternate function <<_getchar_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-The next character (read as an <<unsigned char>>, and cast to
-<<int>>), unless there is no more data, or the host system reports a
-read error; in either of these situations, <<getchar>> returns <<EOF>>.
-
-You can distinguish the two situations that cause an <<EOF>> result by
-using `<<ferror(stdin)>>' and `<<feof(stdin)>>'.
-
-PORTABILITY
-ANSI C requires <<getchar>>; it suggests, but does not require, that
-<<getchar>> be implemented as a macro.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * A subroutine version of the macro getchar.
- */
-
-#include <stdio.h>
-#include <reent.h>
-
-#include "local.h"
-
-#undef getchar
-
-int
-_getchar_r (f)
-     struct _reent *f;
-{
-  _REENT_SMALL_CHECK_INIT(_stdin_r (f));
-  return getc (_stdin_r (f));
-}
-
-#ifndef _REENT_ONLY
-
-int
-getchar ()
-{
-  /* CHECK_INIT is called (eventually) by __srefill.  */
-
-  return _getchar_r (_REENT);
-}
-
-#endif
diff --git a/newlib/libc/stdio/getchar_u.c b/newlib/libc/stdio/getchar_u.c
deleted file mode 100644
index f36f88810..000000000
--- a/newlib/libc/stdio/getchar_u.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<getchar_unlocked>>---non-thread-safe version of getchar (macro)
-
-INDEX
-	getchar_unlocked
-
-POSIX_SYNOPSIS
-	#include <stdio.h>
-	int getchar_unlocked();
-
-DESCRIPTION
-<<getchar_unlocked>> is a non-thread-safe version of <<getchar>>
-declared in <<stdio.h>>.  <<getchar_unlocked>> may only safely be used
-within a scope protected by flockfile() (or ftrylockfile()) and
-funlockfile().  These functions may safely be used in a multi-threaded
-program if and only if they are called while the invoking thread owns
-the ( FILE *) object, as is the case after a successful call to the
-flockfile() or ftrylockfile() functions.  If threads are disabled,
-then <<getchar_unlocked>> is equivalent to <<getchar>>.
-
-RETURNS
-See <<getchar>>.
-
-PORTABILITY
-POSIX 1003.1 requires <<getchar_unlocked>>.  <<getchar_unlocked>> may
-be implemented as a macro.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * A subroutine version of the macro getchar_unlocked.
- */
-
-#include <stdio.h>
-#include <reent.h>
-
-#undef getchar_unlocked
-
-int
-_getchar_unlocked_r (f)
-     struct _reent *f;
-{
-  return getc_unlocked (_stdin_r (f));
-}
-
-#ifndef _REENT_ONLY
-
-int
-getchar_unlocked ()
-{
-  /* CHECK_INIT is called (eventually) by __srefill.  */
-
-  return _getchar_unlocked_r (_REENT);
-}
-
-#endif
diff --git a/newlib/libc/stdio/getdelim.c b/newlib/libc/stdio/getdelim.c
deleted file mode 100644
index 64f60ee8c..000000000
--- a/newlib/libc/stdio/getdelim.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-FUNCTION
-<<getdelim>>---read a line up to a specified line delimeter
-
-INDEX
-	getdelim
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int getdelim(char **<[bufptr]>, size_t *<[n]>,
-                     int <[delim]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int getdelim(<[bufptr]>, <[n]>, <[delim]>, <[fp]>)
-	char **<[bufptr]>;
-	size_t *<[n]>;
-	int <[delim]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<getdelim>> reads a file <[fp]> up to and possibly including a specified
-delimeter <[delim]>.  The line is read into a buffer pointed to
-by <[bufptr]> and designated with size *<[n]>.  If the buffer is
-not large enough, it will be dynamically grown by <<getdelim>>.
-As the buffer is grown, the pointer to the size <[n]> will be
-updated.
-
-RETURNS
-<<getdelim>> returns <<-1>> if no characters were successfully read,
-otherwise, it returns the number of bytes successfully read.
-at end of file, the result is nonzero.
-
-PORTABILITY
-<<getdelim>> is a glibc extension.
-
-No supporting OS subroutines are directly required.
-*/
-
-/* Copyright 2002, Red Hat Inc. - all rights reserved */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include "local.h"
-
-#define MIN_LINE_SIZE 4
-#define DEFAULT_LINE_SIZE 128
-
-ssize_t
-__getdelim (bufptr, n, delim, fp)
-     char **bufptr;
-     size_t *n;
-     int delim;
-     FILE *fp;
-{
-  char *buf;
-  char *ptr;
-  size_t newsize, numbytes;
-  int pos;
-  int ch;
-  int cont;
-
-  if (fp == NULL || bufptr == NULL || n == NULL)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  buf = *bufptr;
-  if (buf == NULL || *n < MIN_LINE_SIZE) 
-    {
-      buf = (char *)realloc (*bufptr, DEFAULT_LINE_SIZE);
-      if (buf == NULL)
-        {
-	  return -1;
-        }
-      *bufptr = buf;
-      *n = DEFAULT_LINE_SIZE;
-    }
-
-  _flockfile(fp);
-
-  CHECK_INIT(fp);
-
-  numbytes = *n;
-  ptr = buf;
-
-  cont = 1;
-
-  while (cont)
-    {
-      /* fill buffer - leaving room for nul-terminator */
-      while (--numbytes > 0)
-        {
-          if ((ch = getc_unlocked (fp)) == EOF)
-            {
-	      cont = 0;
-              break;
-            }
-	  else 
-            {
-              *ptr++ = ch;
-              if (ch == delim)
-                {
-                  cont = 0;
-                  break;
-                }
-            }
-        }
-
-      if (cont)
-        {
-          /* Buffer is too small so reallocate a larger buffer.  */
-          pos = ptr - buf;
-          newsize = (*n << 1);
-          buf = realloc (buf, newsize);
-          if (buf == NULL)
-            {
-              cont = 0;
-              break;
-            }
-
-          /* After reallocating, continue in new buffer */          
-          *bufptr = buf;
-          *n = newsize;
-          ptr = buf + pos;
-          numbytes = newsize - pos;
-        }
-    }
-
-  _funlockfile (fp);
-
-  /* if no input data, return failure */
-  if (ptr == buf)
-    return -1;
-
-  /* otherwise, nul-terminate and return number of bytes read */
-  *ptr = '\0';
-  return (ssize_t)(ptr - buf);
-}
-
diff --git a/newlib/libc/stdio/getline.c b/newlib/libc/stdio/getline.c
deleted file mode 100644
index 741a7dc77..000000000
--- a/newlib/libc/stdio/getline.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-FUNCTION
-<<getline>>---read a line from a file
-
-INDEX
-        getline
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-        ssize_t getline(char **<[bufptr]>, size_t *<[n]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-        #include <stdio.h>
-        ssize_t getline(<[bufptr]>, <[n]>, <[fp]>)
-        char **<[bufptr]>;
-        size_t *<[n]>;
-        FILE *<[fp]>;
-
-DESCRIPTION
-<<getline>> reads a file <[fp]> up to and possibly including the
-newline character.  The line is read into a buffer pointed to
-by <[bufptr]> and designated with size *<[n]>.  If the buffer is
-not large enough, it will be dynamically grown by <<getdelim>>.
-As the buffer is grown, the pointer to the size <[n]> will be
-updated.
-
-<<getline>> is equivalent to getdelim(bufptr, n, '\n', fp);
-
-RETURNS
-<<getline>> returns <<-1>> if no characters were successfully read,
-otherwise, it returns the number of bytes successfully read.
-at end of file, the result is nonzero.
-
-PORTABILITY
-<<getline>> is a glibc extension.
-
-No supporting OS subroutines are directly required.
-*/
-
-/* Copyright 2002, Red Hat Inc. - all rights reserved */
-
-#include <stdio.h>
-
-extern ssize_t __getdelim (char **, size_t *, int, FILE *);
-
-ssize_t
-__getline (lptr, n, fp)
-     char **lptr;
-     size_t *n;
-     FILE *fp;
-{
-  return __getdelim (lptr, n, '\n', fp);
-}
-
diff --git a/newlib/libc/stdio/gets.c b/newlib/libc/stdio/gets.c
deleted file mode 100644
index 796100e32..000000000
--- a/newlib/libc/stdio/gets.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-
-/*
-
-FUNCTION
-        <<gets>>---get character string (obsolete, use <<fgets>> instead)
-INDEX
-	gets
-INDEX
-	_gets_r
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-	char *gets(char *<[buf]>);
-
-	char *_gets_r(void *<[reent]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	char *gets(<[buf]>)
-	char *<[buf]>;
-
-	char *_gets_r(<[reent]>, <[buf]>)
-	char *<[reent]>;
-	char *<[buf]>;
-
-DESCRIPTION
-	Reads characters from standard input until a newline is found.
-	The characters up to the newline are stored in <[buf]>. The
-	newline is discarded, and the buffer is terminated with a 0.
-
-	This is a @emph{dangerous} function, as it has no way of checking
-	the amount of space available in <[buf]>. One of the attacks
-	used by the Internet Worm of 1988 used this to overrun a
-	buffer allocated on the stack of the finger daemon and
-	overwrite the return address, causing the daemon to execute
-	code downloaded into it over the connection.
-
-	The alternate function <<_gets_r>> is a reentrant version.  The extra
-	argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-	<<gets>> returns the buffer passed to it, with the data filled
-	in. If end of file occurs with some data already accumulated,
-	the data is returned with no other indication. If end of file
-	occurs with no data in the buffer, NULL is returned.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-
-char *
-_gets_r (ptr, buf)
-     struct _reent *ptr;
-     char *buf;
-{
-  register int c;
-  register char *s = buf;
-
-  while ((c = _getchar_r (ptr)) != '\n')
-    if (c == EOF)
-      if (s == buf)
-	return NULL;
-      else
-	break;
-    else
-      *s++ = c;
-  *s = 0;
-  return buf;
-}
-
-#ifndef _REENT_ONLY
-
-char *
-gets (buf)
-     char *buf;
-{
-  return _gets_r (_REENT, buf);
-}
-
-#endif
diff --git a/newlib/libc/stdio/getw.c b/newlib/libc/stdio/getw.c
deleted file mode 100644
index b6fd87313..000000000
--- a/newlib/libc/stdio/getw.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<getw>>---read a word (int)
-
-INDEX
-	getw
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int getw(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int getw(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<getw>> is a function, defined in <<stdio.h>>.  You can use <<getw>>
-to get the next word from the file or stream identified by <[fp]>.  As
-a side effect, <<getw>> advances the file's current position
-indicator.
-
-RETURNS The next word (read as an <<int>>), unless there is no more
-data, or the host system reports a read error; in either of these
-situations, <<getw>> returns <<EOF>>.  Since <<EOF>> is a valid
-<<int>>, you must use <<ferror>> or <<feof>> to distinguish these
-situations.
-
-PORTABILITY
-<<getw>> is a remnant of K&R C, it is not part of any ISO C Standard.
-<<fread>> should be used instead.  In fact, this implementation of
-<<getw>> is based upon <<fread>>.
-
-Supporting OS subroutines required: <<fread>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-int
-getw (fp)
-     register FILE *fp;
-{
-  int result;
-  if (fread((char*)&result, sizeof(result), 1, fp) != 1)
-    return EOF;
-  return result;
-}
diff --git a/newlib/libc/stdio/iprintf.c b/newlib/libc/stdio/iprintf.c
deleted file mode 100644
index dc91b12fa..000000000
--- a/newlib/libc/stdio/iprintf.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
-FUNCTION
-        <<iprintf>>---write formatted output (integer only)
-INDEX
-	iprintf
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-        int iprintf(const char *<[format]>, ...);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	int iprintf(<[format]> [, <[arg]>, ...])
-	char *<[format]>;
-
-DESCRIPTION
-<<iprintf>> is a restricted version of <<printf>>: it has the same
-arguments and behavior, save that it cannot perform any floating-point
-formatting: the <<f>>, <<g>>, <<G>>, <<e>>, and <<F>> type specifiers
-are not recognized.
-
-RETURNS
-        <<iprintf>> returns the number of bytes in the output string,
-        save that the concluding <<NULL>> is not counted.
-        <<iprintf>> returns when the end of the format string is
-        encountered.  If an error occurs, <<iprintf>>
-        returns <<EOF>>.
-
-PORTABILITY
-<<iprintf>> is not required by ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#include "local.h"
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifndef _REENT_ONLY
-
-#ifdef _HAVE_STDC
-int
-iprintf (const char *fmt,...)
-#else
-int
-iprintf (fmt, va_alist)
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdout_r (_REENT));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfiprintf (stdout, fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#endif /* ! _REENT_ONLY */
-
-#ifdef _HAVE_STDC
-int
-_iprintf_r (struct _reent *ptr, const char *fmt, ...)
-#else
-int
-_iprintf_r (data, fmt, va_alist)
-     char *data;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdout_r (ptr));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfiprintf (_stdout_r (ptr), fmt, ap);
-  va_end (ap);
-  return ret;
-}
diff --git a/newlib/libc/stdio/local.h b/newlib/libc/stdio/local.h
deleted file mode 100644
index b4f4457fc..000000000
--- a/newlib/libc/stdio/local.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	%W% (UofMD/Berkeley) %G%
- */
-
-/*
- * Information local to this implementation of stdio,
- * in particular, macros and private variables.
- */
-
-#include <_ansi.h>
-#include <stdarg.h>
-#include <reent.h>
-#include <unistd.h>
-
-extern int    _EXFUN(__svfscanf_r,(struct _reent *,FILE *, _CONST char *,va_list));
-extern FILE  *_EXFUN(__sfp,(struct _reent *));
-extern int    _EXFUN(__sflags,(struct _reent *,_CONST char*, int*));
-extern int    _EXFUN(__srefill,(FILE *));
-extern _READ_WRITE_RETURN_TYPE _EXFUN(__sread,(void *, char *, int));
-extern _READ_WRITE_RETURN_TYPE _EXFUN(__swrite,(void *, char const *, int));
-extern _fpos_t _EXFUN(__sseek,(void *, _fpos_t, int));
-extern int    _EXFUN(__sclose,(void *));
-extern int    _EXFUN(__stextmode,(int));
-extern void   _EXFUN(__sinit,(struct _reent *));
-extern void   _EXFUN(_cleanup_r,(struct _reent *));
-extern void   _EXFUN(__smakebuf,(FILE *));
-extern int    _EXFUN(_fwalk,(struct _reent *, int (*)(FILE *)));
-struct _glue * _EXFUN(__sfmoreglue,(struct _reent *,int n));
-extern int   _EXFUN(__srefill,(FILE *fp));
-
-/* Called by the main entry point fns to ensure stdio has been initialized.  */
-
-#define CHECK_INIT(fp) \
-  do					\
-    {					\
-      if (!_REENT->__sdidinit)		\
-	__sinit (_REENT);		\
-    }					\
-  while (0)
-
-/* Return true iff the given FILE cannot be written now.  */
-
-#define	cantwrite(fp) \
-  ((((fp)->_flags & __SWR) == 0 || (fp)->_bf._base == NULL) && \
-   __swsetup(fp))
-
-/* Test whether the given stdio file has an active ungetc buffer;
-   release such a buffer, without restoring ordinary unread data.  */
-
-#define	HASUB(fp) ((fp)->_ub._base != NULL)
-#define	FREEUB(fp) { \
-	if ((fp)->_ub._base != (fp)->_ubuf) \
-		_free_r(_REENT, (char *)(fp)->_ub._base); \
-	(fp)->_ub._base = NULL; \
-}
-
-/* Test for an fgetline() buffer.  */
-
-#define	HASLB(fp) ((fp)->_lb._base != NULL)
-#define	FREELB(fp) { _free_r(_REENT,(char *)(fp)->_lb._base); (fp)->_lb._base = NULL; }
-
-/* WARNING: _dcvt is defined in the stdlib directory, not here!  */
-
-char *_EXFUN(_dcvt,(struct _reent *, char *, double, int, int, char, int));
-char *_EXFUN(_sicvt,(char *, short, char));
-char *_EXFUN(_icvt,(char *, int, char));
-char *_EXFUN(_licvt,(char *, long, char));
-#ifdef __GNUC__
-char *_EXFUN(_llicvt,(char *, long long, char));
-#endif
-
-#define CVT_BUF_SIZE 128
-
-#define	NDYNAMIC 4	/* add four more whenever necessary */
diff --git a/newlib/libc/stdio/makebuf.c b/newlib/libc/stdio/makebuf.c
deleted file mode 100644
index 48b664588..000000000
--- a/newlib/libc/stdio/makebuf.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <sys/unistd.h>
-
-#include "local.h"
-
-/*
- * Allocate a file buffer, or switch to unbuffered I/O.
- * Per the ANSI C standard, ALL tty devices default to line buffered.
- *
- * As a side effect, we set __SOPT or __SNPT (en/dis-able fseek
- * optimization) right after the _fstat() that finds the buffer size.
- */
-
-void
-__smakebuf (fp)
-     register FILE *fp;
-{
-  register size_t size, couldbetty;
-  register _PTR p;
-  struct stat st;
-
-  if (fp->_flags & __SNBF)
-    {
-      fp->_bf._base = fp->_p = fp->_nbuf;
-      fp->_bf._size = 1;
-      return;
-    }
-#ifdef __USE_INTERNAL_STAT64
-  if (fp->_file < 0 || _fstat64_r (_REENT, fp->_file, &st) < 0)
-#else
-  if (fp->_file < 0 || _fstat_r (_REENT, fp->_file, &st) < 0)
-#endif
-    {
-      couldbetty = 0;
-      size = BUFSIZ;
-      /* do not try to optimise fseek() */
-      fp->_flags |= __SNPT;
-    }
-  else
-    {
-      couldbetty = (st.st_mode & S_IFMT) == S_IFCHR;
-#ifdef HAVE_BLKSIZE
-      size = st.st_blksize <= 0 ? BUFSIZ : st.st_blksize;
-#else
-      size = BUFSIZ;
-#endif
-      /*
-       * Optimize fseek() only if it is a regular file.
-       * (The test for __sseek is mainly paranoia.)
-       */
-      if ((st.st_mode & S_IFMT) == S_IFREG && fp->_seek == __sseek)
-	{
-	  fp->_flags |= __SOPT;
-#ifdef HAVE_BLKSIZE
-	  fp->_blksize = st.st_blksize;
-#else
-	  fp->_blksize = 1024;
-#endif
-	}
-      else
-	fp->_flags |= __SNPT;
-    }
-  if ((p = _malloc_r (_REENT, size)) == NULL)
-    {
-      fp->_flags |= __SNBF;
-      fp->_bf._base = fp->_p = fp->_nbuf;
-      fp->_bf._size = 1;
-    }
-  else
-    {
-      _REENT->__cleanup = _cleanup_r;
-      fp->_flags |= __SMBF;
-      fp->_bf._base = fp->_p = (unsigned char *) p;
-      fp->_bf._size = size;
-      if (couldbetty && isatty (fp->_file))
-	fp->_flags |= __SLBF;
-    }
-}
diff --git a/newlib/libc/stdio/mktemp.c b/newlib/libc/stdio/mktemp.c
deleted file mode 100644
index f5757f3c7..000000000
--- a/newlib/libc/stdio/mktemp.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/* This is file MKTEMP.C */
-/* This file may have been modified by DJ Delorie (Jan 1991).  If so,
-** these modifications are Copyright (C) 1991 DJ Delorie.
-*/
-
-/*
- * Copyright (c) 1987 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<mktemp>>, <<mkstemp>>---generate unused file name
-
-INDEX
-	mktemp
-INDEX
-	mkstemp
-INDEX
-	_mktemp_r
-INDEX
-	_mkstemp_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	char *mktemp(char *<[path]>);
-	int mkstemp(char *<[path]>);
-
-	char *_mktemp_r(void *<[reent]>, char *<[path]>);
-	int *_mkstemp_r(void *<[reent]>, char *<[path]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	char *mktemp(<[path]>)
-	char *<[path]>;
-
-	int mkstemp(<[path]>)
-	char *<[path]>;
-
-	char *_mktemp_r(<[reent]>, <[path]>)
-	char *<[reent]>;
-	char *<[path]>;
-
-	int _mkstemp_r(<[reent]>, <[path]>)
-	char *<[reent]>;
-	char *<[path]>;
-
-DESCRIPTION
-<<mktemp>> and <<mkstemp>> attempt to generate a file name that is not
-yet in use for any existing file.  <<mkstemp>> creates the file and 
-opens it for reading and writing; <<mktemp>> simply generates the file name.
-
-You supply a simple pattern for the generated file name, as the string
-at <[path]>.  The pattern should be a valid filename (including path
-information if you wish) ending with some number of `<<X>>'
-characters.  The generated filename will match the leading part of the
-name you supply, with the trailing `<<X>>' characters replaced by some
-combination of digits and letters.
-
-The alternate functions <<_mktemp_r>> and <<_mkstemp_r>> are reentrant
-versions.  The extra argument <[reent]> is a pointer to a reentrancy
-structure.
-
-RETURNS
-<<mktemp>> returns the pointer <[path]> to the modified string
-representing an unused filename, unless it could not generate one, or
-the pattern you provided is not suitable for a filename; in that case,
-it returns <<NULL>>.
-
-<<mkstemp>> returns a file descriptor to the newly created file,
-unless it could not generate an unused filename, or the pattern you
-provided is not suitable for a filename; in that case, it returns
-<<-1>>.
-
-PORTABILITY
-ANSI C does not require either <<mktemp>> or <<mkstemp>>; the System
-V Interface Definition requires <<mktemp>> as of Issue 2.
-
-Supporting OS subroutines required: <<getpid>>, <<open>>, <<stat>>.
-*/
-
-#include <sys/types.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <reent.h>
-
-static int
-_DEFUN (_gettemp, (ptr, path, doopen),
-	struct _reent *ptr _AND
-	char *path _AND
-	register int *doopen)
-{
-  register char *start, *trv;
-  struct stat sbuf;
-  unsigned int pid;
-
-  pid = _getpid_r (ptr);
-  for (trv = path; *trv; ++trv)		/* extra X's get set to 0's */
-    continue;
-  while (*--trv == 'X')
-    {
-      *trv = (pid % 10) + '0';
-      pid /= 10;
-    }
-
-  /*
-   * Check the target directory; if you have six X's and it
-   * doesn't exist this runs for a *very* long time.
-   */
-
-  for (start = trv + 1;; --trv)
-    {
-      if (trv <= path)
-	break;
-      if (*trv == '/')
-	{
-	  *trv = '\0';
-#ifdef __USE_INTERNAL_STAT64
-	  if (_stat64_r (ptr, path, &sbuf))
-#else
-	  if (_stat_r (ptr, path, &sbuf))
-#endif
-	    return (0);
-	  if (!(sbuf.st_mode & S_IFDIR))
-	    {
-	      ptr->_errno = ENOTDIR;
-	      return (0);
-	    }
-	  *trv = '/';
-	  break;
-	}
-    }
-
-  for (;;)
-    {
-      if (doopen)
-	{
-	  if ((*doopen = _open_r (ptr, path, O_CREAT | O_EXCL | O_RDWR, 0600))
-	      >= 0)
-	    return 1;
-#if defined(__CYGWIN__)
-	  if (ptr->_errno != EEXIST && ptr->_errno != EACCES)
-#else
-	  if (ptr->_errno != EEXIST)
-#endif
-	    return 0;
-	}
-#ifdef __USE_INTERNAL_STAT64
-      else if (_stat64_r (ptr, path, &sbuf))
-#else
-      else if (_stat_r (ptr, path, &sbuf))
-#endif
-	return (ptr->_errno == ENOENT ? 1 : 0);
-
-      /* tricky little algorithm for backward compatibility */
-      for (trv = start;;)
-	{
-	  if (!*trv)
-	    return 0;
-	  if (*trv == 'z')
-	    *trv++ = 'a';
-	  else
-	    {
-	      if (isdigit (*trv))
-		*trv = 'a';
-	      else
-		++ * trv;
-	      break;
-	    }
-	}
-    }
-  /*NOTREACHED*/
-}
-
-int
-_DEFUN (_mkstemp_r, (ptr, path),
-	struct _reent *ptr _AND
-	char *path)
-{
-  int fd;
-
-  return (_gettemp (ptr, path, &fd) ? fd : -1);
-}
-
-char *
-_DEFUN (_mktemp_r, (ptr, path),
-	struct _reent *ptr _AND
-	char *path)
-{
-  return (_gettemp (ptr, path, (int *) NULL) ? path : (char *) NULL);
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (mkstemp, (path),
-	char *path)
-{
-  int fd;
-
-  return (_gettemp (_REENT, path, &fd) ? fd : -1);
-}
-
-char *
-_DEFUN (mktemp, (path),
-	char *path)
-{
-  return (_gettemp (_REENT, path, (int *) NULL) ? path : (char *) NULL);
-}
-
-#endif /* ! defined (_REENT_ONLY) */
diff --git a/newlib/libc/stdio/perror.c b/newlib/libc/stdio/perror.c
deleted file mode 100644
index 19354c112..000000000
--- a/newlib/libc/stdio/perror.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-FUNCTION
-<<perror>>---print an error message on standard error
-
-INDEX
-	perror
-INDEX
-	_perror_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void perror(char *<[prefix]>);
-
-	void _perror_r(void *<[reent]>, char *<[prefix]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void perror(<[prefix]>)
-	char *<[prefix]>;
-
-	void _perror_r(<[reent]>, <[prefix]>)
-	char *<[reent]>;
-	char *<[prefix]>;
-
-DESCRIPTION
-Use <<perror>> to print (on standard error) an error message
-corresponding to the current value of the global variable <<errno>>.
-Unless you use <<NULL>> as the value of the argument <[prefix]>, the
-error message will begin with the string at <[prefix]>, followed by a
-colon and a space (<<: >>). The remainder of the error message is one
-of the strings described for <<strerror>>.
-
-The alternate function <<_perror_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-<<perror>> returns no result.
-
-PORTABILITY
-ANSI C requires <<perror>>, but the strings issued vary from one
-implementation to another.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stddef.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "local.h"
-
-void
-_DEFUN (_perror_r, (ptr, s),
-	struct _reent *ptr _AND
-	_CONST char *s)
-{
-  char *error;
-
-  _REENT_SMALL_CHECK_INIT(_stderr_r (ptr));
-  if (s != NULL && *s != '\0')
-    {
-      fputs (s, _stderr_r (ptr));
-      fputs (": ", _stderr_r (ptr));
-    }
-
-  if ((error = strerror (ptr->_errno)) != NULL)
-    fputs (error, _stderr_r (ptr));
-
-  fputc ('\n', _stderr_r (ptr));
-}
-
-#ifndef _REENT_ONLY
-
-void
-_DEFUN (perror, (s),
-	_CONST char *s)
-{
-  _perror_r (_REENT, s);
-}
-
-#endif
diff --git a/newlib/libc/stdio/printf.c b/newlib/libc/stdio/printf.c
deleted file mode 100644
index da4cb8ee8..000000000
--- a/newlib/libc/stdio/printf.c
+++ /dev/null
@@ -1,64 +0,0 @@
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#include "local.h"
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifdef _HAVE_STDC
-int
-_printf_r (struct _reent *ptr, const char *fmt, ...)
-#else
-int
-_printf_r (ptr, fmt, va_alist)
-     struct _reent *ptr;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdout_r (ptr));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = _vfprintf_r (ptr, _stdout_r (ptr), fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#ifndef _REENT_ONLY
-
-#ifdef _HAVE_STDC
-int
-printf (const char *fmt, ...)
-#else
-int
-printf (fmt, va_alist)
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdout_r (_REENT));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfprintf (_stdout_r (_REENT), fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#endif /* ! _REENT_ONLY */
diff --git a/newlib/libc/stdio/putc.c b/newlib/libc/stdio/putc.c
deleted file mode 100644
index 7e53868ab..000000000
--- a/newlib/libc/stdio/putc.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<putc>>---write a character (macro)
-
-INDEX
-	putc
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int putc(int <[ch]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int putc(<[ch]>, <[fp]>)
-	int <[ch]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<putc>> is a macro, defined in <<stdio.h>>.  <<putc>>
-writes the argument <[ch]> to the file or stream identified by
-<[fp]>, after converting it from an <<int>> to an <<unsigned char>>.
-
-If the file was opened with append mode (or if the stream cannot
-support positioning), then the new character goes at the end of the
-file or stream.  Otherwise, the new character is written at the
-current value of the position indicator, and the position indicator
-advances by one.
-
-For a subroutine version of this macro, see <<fputc>>.
-
-RETURNS
-If successful, <<putc>> returns its argument <[ch]>.  If an error
-intervenes, the result is <<EOF>>.  You can use `<<ferror(<[fp]>)>>' to
-query for errors.
-
-PORTABILITY
-ANSI C requires <<putc>>; it suggests, but does not require, that
-<<putc>> be implemented as a macro.  The standard explicitly permits
-macro implementations of <<putc>> to use the <[fp]> argument more than once;
-therefore, in a portable program, you should not use an expression
-with side effects as this argument.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-/*
- * A subroutine version of the macro putc.
- */
-
-#undef putc
-
-int
-putc (c, fp)
-     int c;
-     register FILE *fp;
-{
-  int result;
-  _flockfile(fp);
-  /* CHECK_INIT is (eventually) called by __swbuf.  */
-  result = __sputc (c, fp);
-  _funlockfile(fp);
-  return result;
-}
diff --git a/newlib/libc/stdio/putc_u.c b/newlib/libc/stdio/putc_u.c
deleted file mode 100644
index a3c0e0864..000000000
--- a/newlib/libc/stdio/putc_u.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<putc_unlocked>>---non-thread-safe version of putc (macro)
-
-INDEX
-	putc_unlocked
-
-POSIX_SYNOPSIS
-	#include <stdio.h>
-	int putc_unlocked(int <[ch]>, FILE *<[fp]>);
-
-DESCRIPTION
-<<putc_unlocked>> is a non-thread-safe version of <<putc>> declared in
-<<stdio.h>>.  <<putc_unlocked>> may only safely be used within a scope
-protected by flockfile() (or ftrylockfile()) and funlockfile().  These
-functions may safely be used in a multi-threaded program if and only
-if they are called while the invoking thread owns the ( FILE *)
-object, as is the case after a successful call to the flockfile() or
-ftrylockfile() functions.  If threads are disabled, then
-<<putc_unlocked>> is equivalent to <<putc>>.
-
-RETURNS
-See <<putc>>.
-
-PORTABILITY
-POSIX 1003.1 requires <<putc_unlocked>>.  <<putc_unlocked>> may be
-implemented as a macro, so arguments should not have side-effects.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-/*
- * A subroutine version of the macro putc_unlocked.
- */
-
-#undef putc_unlocked
-
-int
-putc_unlocked (c, fp)
-     int c;
-     register FILE *fp;
-{
-  /* CHECK_INIT is (eventually) called by __swbuf.  */
-
-  return __sputc (c, fp);
-}
diff --git a/newlib/libc/stdio/putchar.c b/newlib/libc/stdio/putchar.c
deleted file mode 100644
index ff207f3d0..000000000
--- a/newlib/libc/stdio/putchar.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<putchar>>---write a character (macro)
-
-INDEX
-	putchar
-INDEX
-	_putchar_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int putchar(int <[ch]>);
-
-	int _putchar_r(void *<[reent]>, int <[ch]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int putchar(<[ch]>)
-	int <[ch]>;
-
-	int _putchar_r(<[reent]>, <[ch]>)
-	char *<[reent]>;
-	int <[ch]>;
-
-DESCRIPTION
-<<putchar>> is a macro, defined in <<stdio.h>>.  <<putchar>>
-writes its argument to the standard output stream,
-after converting it from an <<int>> to an <<unsigned char>>.
-
-The alternate function <<_putchar_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-If successful, <<putchar>> returns its argument <[ch]>.  If an error
-intervenes, the result is <<EOF>>.  You can use `<<ferror(stdin)>>' to
-query for errors.
-
-PORTABILITY
-ANSI C requires <<putchar>>; it suggests, but does not require, that
-<<putchar>> be implemented as a macro.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * A subroutine version of the macro putchar.
- */
-
-#include <stdio.h>
-
-#include "local.h"
-
-#undef putchar
-
-int
-_putchar_r (ptr, c)
-     struct _reent *ptr;
-     int c;
-{
-  _REENT_SMALL_CHECK_INIT(_stdout_r (ptr));
-  return putc (c, _stdout_r (ptr));
-}
-
-#ifndef _REENT_ONLY
-
-int
-putchar (c)
-     int c;
-{
-  /* CHECK_INIT is (eventually) called by __swbuf.  */
-
-  return _putchar_r (_REENT, c);
-}
-
-#endif
diff --git a/newlib/libc/stdio/putchar_u.c b/newlib/libc/stdio/putchar_u.c
deleted file mode 100644
index 3542fe443..000000000
--- a/newlib/libc/stdio/putchar_u.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<putchar_unlocked>>---non-thread-safe version of putchar (macro)
-
-INDEX
-	putchar_unlocked
-
-POSIX_SYNOPSIS
-	#include <stdio.h>
-	int putchar_unlocked(int <[ch]>);
-
-DESCRIPTION
-<<putchar_unlocked>> is a non-thread-safe version of <<putchar>>
-declared in <<stdio.h>>.  <<putchar_unlocked>> may only safely be used
-within a scope protected by flockfile() (or ftrylockfile()) and
-funlockfile().  These functions may safely be used in a multi-threaded
-program if and only if they are called while the invoking thread owns
-the ( FILE *) object, as is the case after a successful call to the
-flockfile() or ftrylockfile() functions.  If threads are disabled,
-then <<putchar_unlocked>> is equivalent to <<putchar>>.
-
-RETURNS
-See <<putchar>>.
-
-PORTABILITY
-POSIX 1003.1 requires <<putchar_unlocked>>.  <<putchar_unlocked>> may
-be implemented as a macro.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * A subroutine version of the macro putchar_unlocked.
- */
-
-#include <stdio.h>
-
-#undef putchar_unlocked
-
-int
-_putchar_unlocked_r (ptr, c)
-     struct _reent *ptr;
-     int c;
-{
-  return putc_unlocked (c, _stdout_r (ptr));
-}
-
-#ifndef _REENT_ONLY
-
-int
-putchar_unlocked (c)
-     int c;
-{
-  /* CHECK_INIT is (eventually) called by __swbuf.  */
-
-  _putchar_unlocked_r (_REENT, c);
-}
-
-#endif
diff --git a/newlib/libc/stdio/puts.c b/newlib/libc/stdio/puts.c
deleted file mode 100644
index e270199d2..000000000
--- a/newlib/libc/stdio/puts.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<puts>>---write a character string
-
-INDEX
-	puts
-INDEX
-	_puts_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int puts(const char *<[s]>);
-
-	int _puts_r(void *<[reent]>, const char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int puts(<[s]>)
-	char *<[s]>;
-
-	int _puts_r(<[reent]>, <[s]>)
-	char *<[reent]>;
-	char *<[s]>;
-
-DESCRIPTION
-<<puts>> writes the string at <[s]> (followed by a newline, instead of
-the trailing null) to the standard output stream.
-
-The alternate function <<_puts_r>> is a reentrant version.  The extra
-argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-If successful, the result is a nonnegative integer; otherwise, the
-result is <<EOF>>.
-
-PORTABILITY
-ANSI C requires <<puts>>, but does not specify that the result on
-success must be <<0>>; any non-negative value is permitted.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "fvwrite.h"
-#include "local.h"
-
-/*
- * Write the given string to stdout, appending a newline.
- */
-
-int
-_DEFUN (_puts_r, (ptr, s),
-	struct _reent *ptr _AND
-	_CONST char * s)
-{
-  size_t c = strlen (s);
-  struct __suio uio;
-  struct __siov iov[2];
-
-  iov[0].iov_base = s;
-  iov[0].iov_len = c;
-  iov[1].iov_base = "\n";
-  iov[1].iov_len = 1;
-  uio.uio_resid = c + 1;
-  uio.uio_iov = &iov[0];
-  uio.uio_iovcnt = 2;
-
-  _REENT_SMALL_CHECK_INIT(_stdout_r (ptr));
-  return (__sfvwrite (_stdout_r (ptr), &uio) ? EOF : '\n');
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (puts, (s),
-	char _CONST * s)
-{
-  return _puts_r (_REENT, s);
-}
-
-#endif
diff --git a/newlib/libc/stdio/putw.c b/newlib/libc/stdio/putw.c
deleted file mode 100644
index 19f4abc01..000000000
--- a/newlib/libc/stdio/putw.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<putw>>---write a word (int)
-
-INDEX
-	putw
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int putw(int <[w]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int putw(<w>, <[fp]>)
-	int <w>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<putw>> is a function, defined in <<stdio.h>>.  You can use <<putw>>
-to write a word to the file or stream identified by <[fp]>.  As a side
-effect, <<putw>> advances the file's current position indicator.
-
-RETURNS Zero on success, <<EOF>> on failure.
-
-PORTABILITY
-<<putw>> is a remnant of K&R C, it is not part of any ISO C Standard.
-<<fwrite>> should be used instead.  In fact, this implementation of
-<<putw>> is based upon <<fwrite>>.
-
-Supporting OS subroutines required: <<fwrite>>.  */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-int
-putw (w, fp)
-     int w;
-     register FILE *fp;
-{
-  if (fwrite((const char*)&w, sizeof(w), 1, fp) != 1)
-    return EOF;
-  return 0;
-}
diff --git a/newlib/libc/stdio/refill.c b/newlib/libc/stdio/refill.c
deleted file mode 100644
index 66ce4ca22..000000000
--- a/newlib/libc/stdio/refill.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include "local.h"
-#include <stdlib.h>
-
-static int
-lflush (fp)
-     FILE *fp;
-{
-  if ((fp->_flags & (__SLBF | __SWR)) == (__SLBF | __SWR))
-    return fflush (fp);
-  return 0;
-}
-
-/*
- * Refill a stdio buffer.
- * Return EOF on eof or error, 0 otherwise.
- */
-
-int
-_DEFUN (__srefill, (fp),
-	register FILE * fp)
-{
-  /* make sure stdio is set up */
-
-  CHECK_INIT (fp);
-
-  fp->_r = 0;			/* largely a convenience for callers */
-
-  /* SysV does not make this test; take it out for compatibility */
-  if (fp->_flags & __SEOF)
-    return EOF;
-
-  /* if not already reading, have to be reading and writing */
-  if ((fp->_flags & __SRD) == 0)
-    {
-      if ((fp->_flags & __SRW) == 0)
-	return EOF;
-      /* switch to reading */
-      if (fp->_flags & __SWR)
-	{
-	  if (fflush (fp))
-	    return EOF;
-	  fp->_flags &= ~__SWR;
-	  fp->_w = 0;
-	  fp->_lbfsize = 0;
-	}
-      fp->_flags |= __SRD;
-    }
-  else
-    {
-      /*
-       * We were reading.  If there is an ungetc buffer,
-       * we must have been reading from that.  Drop it,
-       * restoring the previous buffer (if any).  If there
-       * is anything in that buffer, return.
-       */
-      if (HASUB (fp))
-	{
-	  FREEUB (fp);
-	  if ((fp->_r = fp->_ur) != 0)
-	    {
-	      fp->_p = fp->_up;
-	      return 0;
-	    }
-	}
-    }
-
-  if (fp->_bf._base == NULL)
-    __smakebuf (fp);
-
-  /*
-   * Before reading from a line buffered or unbuffered file,
-   * flush all line buffered output files, per the ANSI C
-   * standard.
-   */
-
-  if (fp->_flags & (__SLBF | __SNBF))
-    (void) _fwalk (_GLOBAL_REENT, lflush);
-  fp->_p = fp->_bf._base;
-  fp->_r = (*fp->_read) (fp->_cookie, (char *) fp->_p, fp->_bf._size);
-  fp->_flags &= ~__SMOD;	/* buffer contents are again pristine */
-  if (fp->_r <= 0)
-    {
-      if (fp->_r == 0)
-	fp->_flags |= __SEOF;
-      else
-	{
-	  fp->_r = 0;
-	  fp->_flags |= __SERR;
-	}
-      return EOF;
-    }
-  return 0;
-}
diff --git a/newlib/libc/stdio/remove.c b/newlib/libc/stdio/remove.c
deleted file mode 100644
index b24ce713f..000000000
--- a/newlib/libc/stdio/remove.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-FUNCTION
-<<remove>>---delete a file's name
-
-INDEX
-	remove
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int remove(char *<[filename]>);
-
-	int _remove_r(void *<[reent]>, char *<[filename]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int remove(<[filename]>)
-	char *<[filename]>;
-
-	int _remove_r(<[reent]>, <[filename]>)
-	char *<[reent]>;
-	char *<[filename]>;
-
-DESCRIPTION
-Use <<remove>> to dissolve the association between a particular
-filename (the string at <[filename]>) and the file it represents.
-After calling <<remove>> with a particular filename, you will no
-longer be able to open the file by that name.
-
-In this implementation, you may use <<remove>> on an open file without
-error; existing file descriptors for the file will continue to access
-the file's data until the program using them closes the file.
-
-The alternate function <<_remove_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<remove>> returns <<0>> if it succeeds, <<-1>> if it fails.
-
-PORTABILITY
-ANSI C requires <<remove>>, but only specifies that the result on
-failure be nonzero.  The behavior of <<remove>> when you call it on an
-open file may vary among implementations.
-
-Supporting OS subroutine required: <<unlink>>.
-*/
-
-#include <stdio.h>
-#include <reent.h>
-
-int
-_remove_r (ptr, filename)
-     struct _reent *ptr;
-     _CONST char *filename;
-{
-  if (_unlink_r (ptr, filename) == -1)
-    return -1;
-
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-int
-remove (filename)
-     _CONST char *filename;
-{
-  return _remove_r (_REENT, filename);
-}
-
-#endif
diff --git a/newlib/libc/stdio/rename.c b/newlib/libc/stdio/rename.c
deleted file mode 100644
index 19a6afdd3..000000000
--- a/newlib/libc/stdio/rename.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-FUNCTION
-<<rename>>---rename a file
-
-INDEX
-	rename
-INDEX
-	_rename_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int rename(const char *<[old]>, const char *<[new]>);
-
-	int _rename_r(void *<[reent]>, 
-                      const char *<[old]>, const char *<[new]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int rename(<[old]>, <[new]>)
-	char *<[old]>;
-	char *<[new]>;
-
-	int _rename_r(<[reent]>, <[old]>, <[new]>)
-	char *<[reent]>;
-	char *<[old]>;
-	char *<[new]>;
-
-DESCRIPTION
-Use <<rename>> to establish a new name (the string at <[new]>) for a
-file now known by the string at <[old]>.  After a successful
-<<rename>>, the file is no longer accessible by the string at <[old]>.
-
-If <<rename>> fails, the file named <<*<[old]>>> is unaffected.  The
-conditions for failure depend on the host operating system.
-
-The alternate function <<_rename_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-The result is either <<0>> (when successful) or <<-1>> (when the file
-could not be renamed).
-
-PORTABILITY
-ANSI C requires <<rename>>, but only specifies that the result on
-failure be nonzero.  The effects of using the name of an existing file
-as <<*<[new]>>> may vary from one implementation to another.
-
-Supporting OS subroutines required: <<link>>, <<unlink>>, or <<rename>>.
-*/
-
-#include <stdio.h>
-#include <sys/unistd.h>
-#include <reent.h>
-
-int
-_rename_r (ptr, old, new)
-     struct _reent *ptr;
-     _CONST char *old;
-     _CONST char *new;
-{
-#ifdef HAVE_RENAME
-  return _rename (old,new);
-#else
-  if (_link_r (ptr, old, new) == -1)
-    return -1;
-
-  if (_unlink_r (ptr, old) == -1)
-    {
-      /* ??? Should we unlink new? (rhetorical question) */
-      return -1;
-    }
-#endif
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-int
-rename (old, new)
-     _CONST char *old;
-     _CONST char *new;
-{
-  return _rename_r (_REENT, old, new);
-}
-
-#endif
diff --git a/newlib/libc/stdio/rewind.c b/newlib/libc/stdio/rewind.c
deleted file mode 100644
index 2b9f3191f..000000000
--- a/newlib/libc/stdio/rewind.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<rewind>>---reinitialize a file or stream
-
-INDEX
-	rewind
-INDEX
-	_rewind_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void rewind(FILE *<[fp]>);
-	void _rewind_r(struct _reent *<[ptr]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void rewind(<[fp]>)
-	FILE *<[fp]>;
-
-	void _rewind_r(<[ptr]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<rewind>> returns the file position indicator (if any) for the file
-or stream identified by <[fp]> to the beginning of the file.  It also
-clears any error indicator and flushes any pending output.
-
-RETURNS
-<<rewind>> does not return a result.
-
-PORTABILITY
-ANSI C requires <<rewind>>.
-
-No supporting OS subroutines are required.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-
-void
-_DEFUN (_rewind_r, (ptr, fp),
-	struct _reent * ptr _AND
-	register FILE * fp)
-{
-	(void) _fseek_r (ptr, fp, 0L, SEEK_SET);
-	clearerr(fp);
-}
-
-#ifndef _REENT_ONLY
-
-void
-_DEFUN (rewind, (fp),
-	register FILE * fp)
-{
-	(void) _fseek_r (_REENT, fp, 0L, SEEK_SET);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdio/rget.c b/newlib/libc/stdio/rget.c
deleted file mode 100644
index ea29c2bce..000000000
--- a/newlib/libc/stdio/rget.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* No user fns here. Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include "local.h"
-
-/*
- * Handle getc() when the buffer ran out:
- * Refill, then return the first character
- * in the newly-filled buffer.
- */
-
-int
-__srget (fp)
-     register FILE *fp;
-{
-  if (__srefill (fp) == 0)
-    {
-      fp->_r--;
-      return *fp->_p++;
-    }
-  return EOF;
-}
diff --git a/newlib/libc/stdio/scanf.c b/newlib/libc/stdio/scanf.c
deleted file mode 100644
index de8e038fc..000000000
--- a/newlib/libc/stdio/scanf.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <stdio.h>
-#include "local.h"
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifndef _REENT_ONLY
-
-int
-#ifdef _HAVE_STDC
-scanf (const char *fmt, ...)
-#else
-scanf (fmt, va_alist)
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdin_r (_REENT));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (_REENT, _stdin_r (_REENT), fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-#ifdef _HAVE_STDC
-_scanf_r (struct _reent *ptr, const char *fmt, ...)
-#else
-_scanf_r (ptr, fmt, va_alist)
-     struct _reent *ptr;
-     char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-
-  _REENT_SMALL_CHECK_INIT(_stdin_r (ptr));
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (ptr, _stdin_r (ptr), fmt, ap);
-  va_end (ap);
-  return (ret);
-}
-
-
diff --git a/newlib/libc/stdio/setbuf.c b/newlib/libc/stdio/setbuf.c
deleted file mode 100644
index 15d09e0f3..000000000
--- a/newlib/libc/stdio/setbuf.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<setbuf>>---specify full buffering for a file or stream
-
-INDEX
-	setbuf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void setbuf(FILE *<[fp]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void setbuf(<[fp]>, <[buf]>)
-	FILE *<[fp]>;
-	char *<[buf]>;
-
-DESCRIPTION
-<<setbuf>> specifies that output to the file or stream identified by <[fp]>
-should be fully buffered.  All output for this file will go to a
-buffer (of size <<BUFSIZ>>, specified in `<<stdio.h>>').  Output will
-be passed on to the host system only when the buffer is full, or when
-an input operation intervenes.
-
-You may, if you wish, supply your own buffer by passing a pointer to
-it as the argument <[buf]>.  It must have size <<BUFSIZ>>.  You can
-also use <<NULL>> as the value of <[buf]>, to signal that the
-<<setbuf>> function is to allocate the buffer.
-
-WARNINGS
-You may only use <<setbuf>> before performing any file operation other
-than opening the file.
-
-If you supply a non-null <[buf]>, you must ensure that the associated
-storage continues to be available until you close the stream
-identified by <[fp]>.
-
-RETURNS
-<<setbuf>> does not return a result.
-
-PORTABILITY
-Both ANSI C and the System V Interface Definition (Issue 2) require
-<<setbuf>>.  However, they differ on the meaning of a <<NULL>> buffer
-pointer: the SVID issue 2 specification says that a <<NULL>> buffer
-pointer requests unbuffered output.  For maximum portability, avoid
-<<NULL>> buffer pointers.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-#include "local.h"
-
-void
-_DEFUN (setbuf, (fp, buf),
-	FILE * fp _AND
-	char *buf)
-{
-  (void) setvbuf (fp, buf, buf ? _IOFBF : _IONBF, BUFSIZ);
-}
diff --git a/newlib/libc/stdio/setbuffer.c b/newlib/libc/stdio/setbuffer.c
deleted file mode 100644
index c74c7fce1..000000000
--- a/newlib/libc/stdio/setbuffer.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* 
-Modified copy of setbuf.c to support the setbuffer function
-defined as part of BSD.
-Modifications by Gareth Pearce, 2001.
-*/
-
-/*
-FUNCTION
-<<setbuffer>>---specify full buffering for a file or stream with size
-
-INDEX
-	setbuffer
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void setbuffer(FILE *<[fp]>, char *<[buf]>, int <[size]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void setbuffer(<[fp]>, <[buf]>, <[size]>)
-	FILE *<[fp]>;
-	char *<[buf]>;
-	int <[size]>;
-
-DESCRIPTION
-<<setbuffer>> specifies that output to the file or stream identified by
-<[fp]> should be fully buffered.  All output for this file will go to a
-buffer (of size <[size]>).  Output will be passed on to the host system
-only when the buffer is full, or when an input operation intervenes.
-
-You may, if you wish, supply your own buffer by passing a pointer to
-it as the argument <[buf]>.  It must have size <[size]>.  You can
-also use <<NULL>> as the value of <[buf]>, to signal that the
-<<setbuffer>> function is to allocate the buffer.
-
-WARNINGS
-You may only use <<setbuffer>> before performing any file operation
-other than opening the file.
-
-If you supply a non-null <[buf]>, you must ensure that the associated
-storage continues to be available until you close the stream
-identified by <[fp]>.
-
-RETURNS
-<<setbuffer>> does not return a result.
-
-PORTABILITY
-This function comes from BSD not ANSI or POSIX.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-
-
-FUNCTION
-
-<<setlinebuf>>---specify line buffering for a file or stream
-
-INDEX
-	setlinebuf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void setlinebuf(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void setlinebuf(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<setlinebuf>> specifies that output to the file or stream identified by
-<[fp]> should be line buffered.  This causes the file or stream to pass
-on output to the host system at every newline, as well as when the
-buffer is full, or when an input operation intervenes.
-
-WARNINGS
-You may only use <<setlinebuf>> before performing any file operation
-other than opening the file.
-
-RETURNS
-<<setlinebuf>> returns as per setvbuf.
-
-PORTABILITY
-This function comes from BSD not ANSI or POSIX.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-#include "local.h"
-
-void
-_DEFUN (setbuffer, (fp, buf, size),
-	FILE * fp _AND
-	char *buf _AND
-	int size)
-{
-  (void) setvbuf (fp, buf, buf ? _IOFBF : _IONBF, (size_t) size);
-}
diff --git a/newlib/libc/stdio/setlinebuf.c b/newlib/libc/stdio/setlinebuf.c
deleted file mode 100644
index f27971357..000000000
--- a/newlib/libc/stdio/setlinebuf.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* 
-Modified copy of setbuf.c to support setlinebuf function
-defined as part of BSD.
-Modifications by Gareth Pearce, 2001.
-*/
-
-/*
-FUNCTION
-
-<<setlinebuf>>---specify line buffering for a file or stream
-
-INDEX
-	setlinebuf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	void setlinebuf(FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	void setlinebuf(<[fp]>)
-	FILE *<[fp]>;
-
-DESCRIPTION
-<<setlinebuf>> specifies that output to the file or stream identified by
-<[fp]> should be line buffered.  This causes the file or stream to pass
-on output to the host system at every newline, as well as when the
-buffer is full, or when an input operation intervenes.
-
-WARNINGS
-You may only use <<setlinebuf>> before performing any file operation
-other than opening the file.
-
-RETURNS
-<<setlinebuf>> returns as per setvbuf.
-
-PORTABILITY
-This function comes from BSD not ANSI or POSIX.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-#include "local.h"
-
-int
-_DEFUN (setlinebuf, (fp),
-	FILE * fp)
-{
-  return (setvbuf (fp, (char *) NULL, _IOLBF, (size_t) 0));
-}
diff --git a/newlib/libc/stdio/setvbuf.c b/newlib/libc/stdio/setvbuf.c
deleted file mode 100644
index 74a4ceaf2..000000000
--- a/newlib/libc/stdio/setvbuf.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<setvbuf>>---specify file or stream buffering
-
-INDEX
-	setvbuf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int setvbuf(FILE *<[fp]>, char *<[buf]>,
-	            int <[mode]>, size_t <[size]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int setvbuf(<[fp]>, <[buf]>, <[mode]>, <[size]>)
-	FILE *<[fp]>;
-	char *<[buf]>;
-	int <[mode]>;
-	size_t <[size]>;
-
-DESCRIPTION
-Use <<setvbuf>> to specify what kind of buffering you want for the
-file or stream identified by <[fp]>, by using one of the following
-values (from <<stdio.h>>) as the <[mode]> argument:
-
-o+
-o _IONBF
-Do not use a buffer: send output directly to the host system for the
-file or stream identified by <[fp]>.
-
-o _IOFBF
-Use full output buffering: output will be passed on to the host system
-only when the buffer is full, or when an input operation intervenes.
-
-o _IOLBF
-Use line buffering: pass on output to the host system at every
-newline, as well as when the buffer is full, or when an input
-operation intervenes.
-o-
-
-Use the <[size]> argument to specify how large a buffer you wish.  You
-can supply the buffer itself, if you wish, by passing a pointer to a
-suitable area of memory as <[buf]>.  Otherwise, you may pass <<NULL>>
-as the <[buf]> argument, and <<setvbuf>> will allocate the buffer.
-
-WARNINGS
-You may only use <<setvbuf>> before performing any file operation other
-than opening the file.
-
-If you supply a non-null <[buf]>, you must ensure that the associated
-storage continues to be available until you close the stream
-identified by <[fp]>.
-
-RETURNS
-A <<0>> result indicates success, <<EOF>> failure (invalid <[mode]> or
-<[size]> can cause failure).
-
-PORTABILITY
-Both ANSI C and the System V Interface Definition (Issue 2) require
-<<setvbuf>>. However, they differ on the meaning of a <<NULL>> buffer
-pointer: the SVID issue 2 specification says that a <<NULL>> buffer
-pointer requests unbuffered output.  For maximum portability, avoid
-<<NULL>> buffer pointers.
-
-Both specifications describe the result on failure only as a
-nonzero value.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include "local.h"
-
-/*
- * Set one of the three kinds of buffering, optionally including a buffer.
- */
-
-int
-_DEFUN (setvbuf, (fp, buf, mode, size),
-	register FILE * fp _AND
-	char *buf _AND
-	register int mode _AND
-	register size_t size)
-{
-  int ret = 0;
-
-  _flockfile(fp);
-
-  CHECK_INIT (fp);
-
-  /*
-   * Verify arguments.  The `int' limit on `size' is due to this
-   * particular implementation.
-   */
-
-  if ((mode != _IOFBF && mode != _IOLBF && mode != _IONBF) || (int)(_POINTER_INT) size < 0)
-    {
-      _funlockfile(fp);
-      return (EOF);
-    }
-
-  /*
-   * Write current buffer, if any; drop read count, if any.
-   * Make sure putc() will not think fp is line buffered.
-   * Free old buffer if it was from malloc().  Clear line and
-   * non buffer flags, and clear malloc flag.
-   */
-
-  (void) fflush (fp);
-  fp->_r = 0;
-  fp->_lbfsize = 0;
-  if (fp->_flags & __SMBF)
-    _free_r (_REENT, (void *) fp->_bf._base);
-  fp->_flags &= ~(__SLBF | __SNBF | __SMBF);
-
-  if (mode == _IONBF)
-    goto nbf;
-
-  /*
-   * Allocate buffer if needed. */
-  if (buf == NULL)
-    {
-      /* we need this here because malloc() may return a pointer
-	 even if size == 0 */
-      if (!size) size = BUFSIZ;
-      if ((buf = malloc (size)) == NULL)
-	{
-	  ret = EOF;
-	  /* Try another size... */
-	  buf = malloc (BUFSIZ);
-	  size = BUFSIZ;
-	}
-      if (buf == NULL)
-        {
-          /* Can't allocate it, let's try another approach */
-nbf:
-          fp->_flags |= __SNBF;
-          fp->_w = 0;
-          fp->_bf._base = fp->_p = fp->_nbuf;
-          fp->_bf._size = 1;
-          _funlockfile(fp);
-          return (ret);
-        }
-      fp->_flags |= __SMBF;
-    }
-  /*
-   * Now put back whichever flag is needed, and fix _lbfsize
-   * if line buffered.  Ensure output flush on exit if the
-   * stream will be buffered at all.
-   * If buf is NULL then make _lbfsize 0 to force the buffer
-   * to be flushed and hence malloced on first use
-   */
-
-  switch (mode)
-    {
-    case _IOLBF:
-      fp->_flags |= __SLBF;
-      fp->_lbfsize = buf ? -size : 0;
-      /* FALLTHROUGH */
-
-    case _IOFBF:
-      /* no flag */
-      _REENT->__cleanup = _cleanup_r;
-      fp->_bf._base = fp->_p = (unsigned char *) buf;
-      fp->_bf._size = size;
-      break;
-    }
-
-  /*
-   * Patch up write count if necessary.
-   */
-
-  if (fp->_flags & __SWR)
-    fp->_w = fp->_flags & (__SLBF | __SNBF) ? 0 : size;
-
-  _funlockfile(fp);
-  return 0;
-}
diff --git a/newlib/libc/stdio/siprintf.c b/newlib/libc/stdio/siprintf.c
deleted file mode 100644
index aeced2e53..000000000
--- a/newlib/libc/stdio/siprintf.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-FUNCTION
-        <<siprintf>>---write formatted output (integer only)
-INDEX
-	siprintf
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-        int siprintf(char *<[str]>, const char *<[format]> [, <[arg]>, ...]);
-
-
-DESCRIPTION
-<<siprintf>> is a restricted version of <<sprintf>>: it has the same
-arguments and behavior, save that it cannot perform any floating-point
-formatting: the <<f>>, <<g>>, <<G>>, <<e>>, and <<F>> type specifiers
-are not recognized.
-
-RETURNS
-        <<siprintf>> returns the number of bytes in the output string,
-        save that the concluding <<NULL>> is not counted.
-        <<siprintf>> returns when the end of the format string is
-        encountered.
-
-PORTABILITY
-<<siprintf>> is not required by ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include <limits.h>
-#include <_ansi.h>
-#include <reent.h>
-#include "local.h"
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (siprintf, (str, fmt), char *str _AND _CONST char *fmt _DOTS)
-#else
-siprintf (str, fmt, va_alist)
-     char *str;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = INT_MAX;
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = vfiprintf (&f, fmt, ap);
-  va_end (ap);
-  *f._p = 0;
-  return (ret);
-}
diff --git a/newlib/libc/stdio/snprintf.c b/newlib/libc/stdio/snprintf.c
deleted file mode 100644
index fe54ea081..000000000
--- a/newlib/libc/stdio/snprintf.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* doc in sprintf.c */
-
-/* This code created by modifying sprintf.c so copyright inherited. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include <limits.h>
-#include <_ansi.h>
-#include "local.h"
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (_snprintf_r, (ptr, str, size, fmt), struct _reent *ptr _AND char *str _AND size_t size _AND _CONST char *fmt _DOTS)
-#else
-_snprintf_r (ptr, str, size, fmt, va_alist)
-     struct _reent *ptr;
-     char *str;
-     size_t size;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = (size > 0 ? size - 1 : 0);
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = _vfprintf_r (ptr, &f, fmt, ap);
-  va_end (ap);
-  if (size > 0)
-    *f._p = 0;
-  return (ret);
-}
-
-#ifndef _REENT_ONLY
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (snprintf, (str, size, fmt), char *str _AND size_t size _AND _CONST char *fmt _DOTS)
-#else
-snprintf (str, size, fmt, va_alist)
-     char *str;
-     size_t size;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = (size > 0 ? size - 1 : 0);
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = _vfprintf_r (_REENT, &f, fmt, ap);
-  va_end (ap);
-  if (size > 0)
-    *f._p = 0;
-  return (ret);
-}
-
-#endif
diff --git a/newlib/libc/stdio/sprintf.c b/newlib/libc/stdio/sprintf.c
deleted file mode 100644
index 01be921aa..000000000
--- a/newlib/libc/stdio/sprintf.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-
-FUNCTION
-        <<printf>>, <<fprintf>>, <<asprintf>>, <<sprintf>>, <<snprintf>>---format output
-INDEX
-	fprintf
-INDEX
-	printf
-INDEX
-	asprintf
-INDEX
-	sprintf
-INDEX
-	snprintf
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-        int printf(const char *<[format]> [, <[arg]>, ...]);
-        int fprintf(FILE *<[fd]>, const char *<[format]> [, <[arg]>, ...]);
-        int sprintf(char *<[str]>, const char *<[format]> [, <[arg]>, ...]);
-        int asprintf(char **<[strp]>, const char *<[format]> [, <[arg]>, ...]);
-        int snprintf(char *<[str]>, size_t <[size]>, const char *<[format]> [, <[arg]>, ...]);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	int printf(<[format]> [, <[arg]>, ...])
-	char *<[format]>;
-
-	int fprintf(<[fd]>, <[format]> [, <[arg]>, ...]);
-	FILE *<[fd]>;
-	char *<[format]>;
-
-	int asprintf(<[strp]>, <[format]> [, <[arg]>, ...]);
-	char **<[strp]>;
-	char *<[format]>;
-
-	int sprintf(<[str]>, <[format]> [, <[arg]>, ...]);
-	char *<[str]>;
-	char *<[format]>;
-
-	int snprintf(<[str]>, size_t <[size]>, <[format]> [, <[arg]>, ...]);
-	char *<[str]>;
-        size_t <[size]>;
-	char *<[format]>;
-
-DESCRIPTION
-        <<printf>> accepts a series of arguments, applies to each a
-        format specifier from <<*<[format]>>>, and writes the
-        formatted data to <<stdout>>, terminated with a null character.
-        The behavior of <<printf>> is undefined if there are not enough
-        arguments for the format.
-        <<printf>> returns when it reaches the end of the format string.
-        If there are more arguments than the format requires, excess
-        arguments are ignored.
-
-        <<fprintf>>, <<asprintf>>, <<sprintf>> and <<snprintf>> are identical 
-	to <<printf>>, other than the destination of the formatted output: 
-	<<fprintf>> sends the output to a specified file <[fd]>, while 
-	<<asprintf>> stores the output in a dynamically allocated buffer,
-	while <<sprintf>> stores the output in the specified char array 
-	<[str]> and <<snprintf>> limits number of characters written to 
-	<[str]> to at most <[size]> (including terminating <<0>>).  For 
-	<<sprintf>> and <<snprintf>>, the behavior is undefined if the 
-	output <<*<[str]>>> overlaps with one of the arguments. For
-	<<asprintf>>, <[strp]> points to a pointer to char which is filled
-	in with the dynamically allocated buffer.  <[format]> is a pointer 
-	to a charater string containing two types of objects: ordinary 
-	characters (other than <<%>>), which are copied unchanged to the 
-	output, and conversion specifications, each of which is introduced 
-	by <<%>>. (To include <<%>> in the output, use <<%%>> in the format 
-	string.) A conversion specification has the following form:
-
-.       %[<[flags]>][<[width]>][.<[prec]>][<[size]>][<[type]>]
-
-        The fields of the conversion specification have the following meanings:
-
-        O+
-	o <[flags]>
-
-	an optional sequence of characters which control
-	output justification, numeric signs, decimal points,
-	trailing zeroes, and octal and hex prefixes.
-	The flag characters are minus (<<->>), plus (<<+>>),
-	space ( ), zero (<<0>>), and sharp (<<#>>).  They can
-	appear in any combination.
-
-	o+
-    	o -
-		The result of the conversion is left justified, and the right is
-		padded with blanks.  If you do not use this flag, the result is right
-		justified, and padded on the left.
-
-        o +
-		The result of a signed conversion (as determined by <[type]>)
-		will always begin with a plus or minus sign.  (If you do not use
-        this flag, positive values do not begin with a plus sign.)
-
-        o " " (space)
-		If the first character of a signed conversion specification
-        is not a sign, or if a signed conversion results in no
-		characters, the result will begin with a space.  If the
-        space ( ) flag and the plus (<<+>>) flag both appear,
-		the space flag is ignored.
-
-        o 0
-		If the <[type]> character is <<d>>, <<i>>, <<o>>, <<u>>,
-		<<x>>, <<X>>, <<e>>, <<E>>, <<f>>, <<g>>, or <<G>>: leading zeroes,
-		are used to pad the field width (following any indication of sign or
-		base); no spaces are used for padding.  If the zero (<<0>>) and
-		minus (<<->>) flags both appear, the zero (<<0>>) flag will
-		be ignored.  For <<d>>, <<i>>, <<o>>, <<u>>, <<x>>, and <<X>>
-		conversions, if a precision <[prec]> is specified, the zero (<<0>>)
-        flag is ignored.
-		
-		Note that <<0>> is interpreted as a flag, not as the beginning
-        of a field width.
-
-        o #
-		The result is to be converted to an alternative form, according
-		to the next character:
-
-	    o+
-		    o 0
-			increases precision to force the first digit
-                        of the result to be a zero.
-
-			o x
-			a non-zero result will have a <<0x>> prefix.
-
-			o X
-			a non-zero result will have a <<0X>> prefix.
-
-			o e, E or f
-			The result will always contain a decimal point
-		        even if no digits follow the point.
-                        (Normally, a decimal point appears only if a
-			digit follows it.)  Trailing zeroes are removed.
-
-			o g or G
-			same as <<e>> or <<E>>, but trailing zeroes
-                        are not removed.
-
-			o all others
-			undefined.
-
-			o-
-      o-
-
-      o <[width]>
-
-	  <[width]> is an optional minimum field width.  You can either
-	  specify it directly as a decimal integer, or indirectly by
-          using instead an asterisk (<<*>>), in which case an <<int>>
-          argument is used as the field width.  Negative field widths
-          are not supported; if you attempt to specify a negative field
-          width, it is interpreted as a minus (<<->>) flag followed by a
-          positive field width.
-
-      o <[prec]>
-
-	  an optional field; if present, it is introduced with `<<.>>'
-	  (a period). This field gives the maximum number of
-	  characters to print in a conversion; the minimum number of
-	  digits of an integer to print, for conversions with <[type]>
-	  <<d>>, <<i>>, <<o>>, <<u>>, <<x>>, and <<X>>; the maximum number of
-	  significant digits, for the <<g>> and <<G>> conversions;
-	  or the number of digits to print after the decimal
-	  point, for <<e>>, <<E>>, and <<f>> conversions.  You can specify
-	  the precision either directly as a decimal integer or
-	  indirectly by using an asterisk (<<*>>), in which case
-	  an <<int>> argument is used as the precision.  Supplying a negative
-      precision is equivalent to omitting the precision.
-	  If only a period is specified the precision is zero.
-	  If a precision appears with any other conversion <[type]>
-	  than those listed here, the behavior is undefined.
-
-      o  <[size]>
-
-		<<h>>, <<l>>, and <<L>> are optional size characters which
-		override the default way that <<printf>> interprets the
-		data type of the corresponding argument.  <<h>> forces
-		the following <<d>>, <<i>>, <<o>>, <<u>>, <<x>> or <<X>> conversion
-		<[type]> to apply to a <<short>> or <<unsigned short>>. <<h>> also
-		forces a following <<n>> <[type]> to apply to
-		a pointer to a <<short>>. Similarily, an
-		<<l>> forces the following <<d>>, <<i>>, <<o>>, <<u>>,
-		<<x>> or <<X>> conversion <[type]> to apply to a <<long>> or
-		<<unsigned long>>.  <<l>> also forces a following <<n>> <[type]> to
-		apply to a pointer to a <<long>>.  <<l>> with <<c>>, <<s>> is
-		equivalent to <<C>>, <<S>> respectively.  If an <<h>>
-		or an <<l>> appears with another conversion
-		specifier, the behavior is undefined.  <<L>> forces a
-		following <<e>>, <<E>>, <<f>>, <<g>> or <<G>> conversion <[type]> to
-		apply to a <<long double>> argument.  If <<L>> appears with
-		any other conversion <[type]>, the behavior is undefined.
-
-     o   <[type]>
-
-		<[type]> specifies what kind of conversion <<printf>> performs.
-		Here is a table of these:
-
-	o+
-		o %
-		prints the percent character (<<%>>)
-
-		o c
-		prints <[arg]> as single character
-		
-		o C
-		prints wchar_t <[arg]> as single multibyte character
-		
-		o s
-		prints characters until precision is reached or a null terminator
-		is encountered; takes a string pointer
-
-		o S
-		converts wchar_t characters to multibyte output characters until
-		precision is reached or a null wchar_t terminator
-		is encountered; takes a wchar_t pointer
-
-		o d
-		prints a signed decimal integer; takes an <<int>> (same as <<i>>)
-
-		o i
-		prints a signed decimal integer; takes an <<int>> (same as <<d>>)
-
-		o o
-		prints a signed octal integer; takes an <<int>>
-
-		o u
-		prints an unsigned decimal integer; takes an <<int>>
-
-		o x
-		prints an unsigned hexadecimal integer (using <<abcdef>> as
-		digits beyond <<9>>); takes an <<int>>
-
-		o X
-		prints an unsigned hexadecimal integer (using <<ABCDEF>> as
-		digits beyond <<9>>); takes an <<int>>
-
-		o f
-		prints a signed value of the form <<[-]9999.9999>>; takes
-		a floating-point number
-	
-		o e
-		prints a signed	value of the form <<[-]9.9999e[+|-]999>>; takes a
-		floating-point number
-
-		o E
-		prints the same way as <<e>>, but using <<E>> to introduce the
-		exponent; takes a floating-point number
-
-		o g
-		prints a signed value in either <<f>> or <<e>> form, based on given
-		value and precision---trailing zeros and the decimal point are
-		printed only if necessary; takes a floating-point number
-	
-		o G
-		prints the same way as <<g>>, but using <<E>> for the exponent if an
-		exponent is needed; takes a floating-point number
-
-		o n
-		stores (in the same object) a count of the characters written;
-		takes a pointer to <<int>>
-
-		o p
-		prints a pointer in an implementation-defined format.
-		This implementation treats the pointer as an
-		<<unsigned long>> (same as <<Lu>>).
-	o-
-O-
-
-
-RETURNS
-<<sprintf>> and <<asprintf>> return the number of bytes in the output string,
-save that the concluding <<NULL>> is not counted.
-<<printf>> and <<fprintf>> return the number of characters transmitted.
-If an error occurs, <<printf>> and <<fprintf>> return <<EOF>> and
-<<asprintf>> returns -1.  No error returns occur for <<sprintf>>.
-
-PORTABILITY
-        The  ANSI C standard specifies that implementations must
-        support at least formatted output of up to 509 characters.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include <limits.h>
-#include <_ansi.h>
-#include "local.h"
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (_sprintf_r, (ptr, str, fmt), struct _reent *ptr _AND char *str _AND _CONST char *fmt _DOTS)
-#else
-_sprintf_r (ptr, str, fmt, va_alist)
-     struct _reent *ptr;
-     char *str;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = INT_MAX;
-  f._file = -1;  /* No file. */
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = _vfprintf_r (ptr, &f, fmt, ap);
-  va_end (ap);
-  *f._p = 0;
-  return (ret);
-}
-
-#ifndef _REENT_ONLY
-
-int
-#ifdef _HAVE_STDC
-_DEFUN (sprintf, (str, fmt), char *str _AND _CONST char *fmt _DOTS)
-#else
-sprintf (str, fmt, va_alist)
-     char *str;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = INT_MAX;
-  f._file = -1;  /* No file. */
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = _vfprintf_r (_REENT, &f, fmt, ap);
-  va_end (ap);
-  *f._p = 0;
-  return (ret);
-}
-
-#endif
diff --git a/newlib/libc/stdio/sscanf.c b/newlib/libc/stdio/sscanf.c
deleted file mode 100644
index ca80c0e71..000000000
--- a/newlib/libc/stdio/sscanf.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-
-FUNCTION
-	<<scanf>>, <<fscanf>>, <<sscanf>>---scan and format input
-
-INDEX
-	scanf
-INDEX
-	fscanf
-INDEX
-	sscanf
-
-ANSI_SYNOPSIS
-        #include <stdio.h>
-
-        int scanf(const char *<[format]> [, <[arg]>, ...]);
-        int fscanf(FILE *<[fd]>, const char *<[format]> [, <[arg]>, ...]);
-        int sscanf(const char *<[str]>, const char *<[format]> 
-                   [, <[arg]>, ...]);
-
-        int _scanf_r(struct _reent *<[ptr]>, const char *<[format]> [, <[arg]>, ...]);
-        int _fscanf_r(struct _reent *<[ptr]>, FILE *<[fd]>, const char *<[format]> [, <[arg]>, ...]);
-        int _sscanf_r(struct _reent *<[ptr]>, const char *<[str]>, const char *<[format]> 
-                   [, <[arg]>, ...]);
-
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	int scanf(<[format]> [, <[arg]>, ...])
-	char *<[format]>;
-
-	int fscanf(<[fd]>, <[format]> [, <[arg]>, ...]);
-	FILE *<[fd]>;
-	char *<[format]>;
-
-	int sscanf(<[str]>, <[format]> [, <[arg]>, ...]);
-	char *<[str]>;
-	char *<[format]>;
-
-	int _scanf_r(<[ptr]>, <[format]> [, <[arg]>, ...])
-        struct _reent *<[ptr]>;
-	char *<[format]>;
-
-	int _fscanf_r(<[ptr]>, <[fd]>, <[format]> [, <[arg]>, ...]);
-        struct _reent *<[ptr]>;
-	FILE *<[fd]>;
-	char *<[format]>;
-
-	int _sscanf_r(<[ptr]>, <[str]>, <[format]> [, <[arg]>, ...]);
-        struct _reent *<[ptr]>;
-	char *<[str]>;
-	char *<[format]>;
-
-
-DESCRIPTION
-        <<scanf>> scans a series of input fields from standard input,
-		one character at a time.  Each field is interpreted according to
-		a format specifier passed to <<scanf>> in the format string at
-        <<*<[format]>>>.  <<scanf>> stores the interpreted input from
-		each field at the address passed to it as the corresponding argument
-		following <[format]>.  You must supply the same number of
-		format specifiers and address arguments as there are input fields.
-
-        There must be sufficient address arguments for the given format
-        specifiers; if not the results are unpredictable and likely
-        disasterous.  Excess address arguments are merely ignored.
-
-        <<scanf>> often produces unexpected results if the input diverges from
-        an expected pattern. Since the combination of <<gets>> or <<fgets>>
-        followed by <<sscanf>> is safe and easy, that is the preferred way
-        to be certain that a program is synchronized with input at the end
-		of a line.
-
-        <<fscanf>> and <<sscanf>> are identical to <<scanf>>, other than the
-        source of input: <<fscanf>> reads from a file, and <<sscanf>>
-		from a string.
-
-        The routines <<_scanf_r>>, <<_fscanf_r>>, and <<_sscanf_r>> are reentrant
-        versions of <<scanf>>, <<fscanf>>, and <<sscanf>> that take an additional
-        first argument pointing to a reentrancy structure.
-
-        The string at <<*<[format]>>> is a character sequence composed
-        of zero or more directives. Directives are composed of
-        one or more whitespace characters, non-whitespace characters,
-        and format specifications.
-
-        Whitespace characters are blank (<< >>), tab (<<\t>>), or
-		newline (<<\n>>).
-        When <<scanf>> encounters a whitespace character in the format string
-        it will read (but not store) all consecutive whitespace characters
-        up to the next non-whitespace character in the input.
-
-        Non-whitespace characters are all other ASCII characters except the
-        percent sign (<<%>>).  When <<scanf>> encounters a non-whitespace
-        character in the format string it will read, but not store
-        a matching non-whitespace character.
-
-        Format specifications tell <<scanf>> to read and convert characters
-        from the input field into specific types of values, and store then
-        in the locations specified by the address arguments.
-
-        Trailing whitespace is left unread unless explicitly
-        matched in the format string.
-
-        The format specifiers must begin with a percent sign (<<%>>)
-        and have the following form:
-
-.       %[*][<[width]>][<[size]>]<[type]>
-
-        Each format specification begins with the percent character (<<%>>).
-        The other fields are:
-	o+
-		o *
-		an optional marker; if present, it suppresses interpretation and
-        assignment of this input field.
-
-        o <[width]>
-		an optional maximum field width: a decimal integer,
-		which controls the maximum number of characters that
-		will be read before converting the current input field.  If the
-		input field has fewer than <[width]> characters, <<scanf>>
-		reads all the characters in the field, and then
-		proceeds with the next field and its format specification.
-
-		If a whitespace or a non-convertable character occurs
-		before <[width]> character are read, the characters up
-		to that character are read, converted, and stored.
-		Then <<scanf>> proceeds to the next format specification.
-
-        o size
-		<<h>>, <<l>>, and <<L>> are optional size characters which
-		override the default way that <<scanf>> interprets the
-		data type of the corresponding argument.
-
-
-.Modifier   Type(s)
-.   hh      d, i, o, u, x, n  convert input to char,
-.                             store in char object
-.
-.   h       d, i, o, u, x, n  convert input to short,
-.                             store in short object
-.
-.   h       D, I, O, U, X     no effect
-.           e, f, c, s, p
-.
-.   l       d, i, o, u, x, n  convert input to long,
-.                             store in long object
-.
-.   l       e, f, g           convert input to double
-.                             store in a double object
-.
-.   l       D, I, O, U, X     no effect
-.           c, s, p
-.
-.   ll      d, i, o, u, x, n  convert to long long,
-.                             store in long long
-.
-.   L       d, i, o, u, x, n  convert to long long,
-.                             store in long long
-.
-.   L       e, f, g, E, G     convert to long double,
-.                             store in long double
-.
-.   L      all others         no effect
-
-
-        o <[type]>
-
-		A character to specify what kind of conversion
-                <<scanf>> performs.  Here is a table of the conversion
-                characters:
-
-		o+
-		o  %
-		No conversion is done; the percent character (<<%>>) is stored.
-
-		o c
-		Scans one character.  Corresponding <[arg]>: <<(char *arg)>>.
-
-		o s
-		Reads a character string into the array supplied.
-		Corresponding <[arg]>: <<(char arg[])>>.
-
-		o  [<[pattern]>]
-		Reads a non-empty character string into memory
-		starting at <[arg]>.  This area must be large
-		enough to accept the sequence and a
-		terminating null character which will be added
-		automatically.  (<[pattern]> is discussed in the paragraph following
-		this table). Corresponding <[arg]>: <<(char *arg)>>.
-
-		o d
-		Reads a decimal integer into the corresponding <[arg]>: <<(int *arg)>>.
-
-		o D
-		Reads a decimal integer into the corresponding
-		<[arg]>: <<(long *arg)>>.
-
-		o o
-		Reads an octal integer into the corresponding <[arg]>: <<(int *arg)>>.
-
-		o O
-		Reads an octal integer into the corresponding <[arg]>: <<(long *arg)>>.
-
-		o u
-		Reads an unsigned decimal integer into the corresponding
-		<[arg]>: <<(unsigned int *arg)>>.
-			
-
-		o U
-		Reads an unsigned decimal integer into the corresponding <[arg]>:
-		<<(unsigned long *arg)>>.
-
-		o x,X
-		Read a hexadecimal integer into the corresponding <[arg]>:
-		<<(int *arg)>>.
-
-		o e, f, g
-		Read a floating-point number into the corresponding <[arg]>:
-		<<(float *arg)>>.
-
-		o E, F, G
-		Read a floating-point number into the corresponding <[arg]>:
-		<<(double *arg)>>.
-
-		o  i
-		Reads a decimal, octal or hexadecimal integer into the
-		corresponding <[arg]>: <<(int *arg)>>.
-
-		o  I
-		Reads a decimal, octal or hexadecimal integer into the
-		corresponding <[arg]>: <<(long *arg)>>.
-
-		o  n
-		Stores the number of characters read in the corresponding
-		<[arg]>: <<(int *arg)>>.
-
-		o  p
-                Stores a scanned pointer.  ANSI C leaves the details
-		to each implementation; this implementation treats
-		<<%p>> exactly the same as <<%U>>.  Corresponding
-		<[arg]>: <<(void **arg)>>.  
-                o-
-
-	A <[pattern]> of characters surrounded by square brackets can be used
-	instead of the <<s>> type character.  <[pattern]> is a set of
-	characters which define a search set of possible characters making up
-	the <<scanf>> input field.  If the first character in the brackets is a
-	caret (<<^>>), the search set is inverted to include all ASCII characters
-	except those between the brackets.  There is also a range facility
-	which you can use as a shortcut. <<%[0-9] >> matches all decimal digits.
-	The hyphen must not be the first or last character in the set.
-	The character prior to the hyphen must be lexically less than the
-	character after it.
-
-	Here are some <[pattern]> examples:
-		o+
-		o %[abcd]
-		matches strings containing only <<a>>, <<b>>, <<c>>, and <<d>>.
-
-		o %[^abcd]
-		matches strings containing any characters except <<a>>, <<b>>,
-		<<c>>, or <<d>>
-
-		o %[A-DW-Z]
-		matches strings containing <<A>>, <<B>>, <<C>>, <<D>>, <<W>>,
-		<<X>>, <<Y>>, <<Z>>
-
-		o %[z-a]
-		matches the characters  <<z>>, <<->>, and <<a>>
-		o-
-
-	Floating point numbers (for field types <<e>>, <<f>>, <<g>>, <<E>>,
-	<<F>>, <<G>>) must correspond to the following general form:
-
-.		[+/-] ddddd[.]ddd [E|e[+|-]ddd]
-
-	where objects inclosed in square brackets are optional, and <<ddd>>
-	represents decimal, octal, or hexadecimal digits.
-	o-
-
-RETURNS
-        <<scanf>> returns the number of input fields successfully
-        scanned, converted and stored; the return value does
-        not include scanned fields which were not stored.
-
-        If <<scanf>> attempts to read at end-of-file, the return
-        value is <<EOF>>.
-
-        If no fields were stored, the return value is <<0>>.
-
-        <<scanf>> might stop scanning a particular field before
-        reaching the normal field end character, or may
-        terminate entirely.
-
-        <<scanf>> stops scanning and storing the current field
-        and moves to the next input field (if any)
-        in any of the following situations:
-
-	O+
-	o       The assignment suppressing character (<<*>>) appears
-	after the <<%>> in the format specification; the current
-	input field is scanned but not stored.
-
-	o       <[width]> characters have been read (<[width]> is a
-	width specification, a positive decimal integer).
-
-	o       The next character read cannot be converted
-	under the the current format (for example,
-	if a <<Z>> is read when the format is decimal).
-
-	o       The next character in the input field does not appear
-	in the search set (or does appear in the inverted search set).
-	O-
-
-	When <<scanf>> stops scanning the current input field for one of
-	these reasons, the next character is considered unread and
-	used as the first character of the following input field, or the
-	first character in a subsequent read operation on the input.
-
-	<<scanf>> will terminate under the following circumstances:
-
-	O+
-	o       The next character in the input field conflicts
-	with a corresponding non-whitespace character in the
-	format string.
-
-	o       The next character in the input field is <<EOF>>.
-
-	o       The format string has been exhausted.
-	O-
-
-	When the format string contains a character sequence that is
-	not part of a format specification, the same character
-	sequence must appear in the input; <<scanf>> will
-	scan but not store the matched characters.  If a
-	conflict occurs, the first conflicting character remains in the input
-	as if it had never been read.
-
-PORTABILITY
-<<scanf>> is ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <string.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include "local.h"
-
-/* | ARGSUSED */
-/*SUPPRESS 590*/
-static
-_READ_WRITE_RETURN_TYPE
-eofread (cookie, buf, len)
-     _PTR cookie;
-     char *buf;
-     int len;
-{
-  return 0;
-}
-
-#ifndef _REENT_ONLY 
-
-#ifdef _HAVE_STDC
-int 
-_DEFUN (sscanf, (str, fmt), _CONST char *str _AND _CONST char *fmt _DOTS)
-#else
-int 
-sscanf (str, fmt, va_alist)
-     _CONST char *str;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SRD;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._r = strlen (str);
-  f._read = eofread;
-  f._ub._base = NULL;
-  f._lb._base = NULL;
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (_REENT, &f, fmt, ap);
-  va_end (ap);
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-#ifdef _HAVE_STDC
-int 
-_DEFUN (_sscanf_r, (ptr, str, fmt), struct _reent *ptr _AND _CONST char *str _AND _CONST char *fmt _DOTS)
-#else
-int 
-_sscanf_r (ptr, str, fmt, va_alist)
-     struct _reent *ptr;
-     _CONST char *str;
-     _CONST char *fmt;
-     va_dcl
-#endif
-{
-  int ret;
-  va_list ap;
-  FILE f;
-
-  f._flags = __SRD;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._r = strlen (str);
-  f._read = eofread;
-  f._ub._base = NULL;
-  f._lb._base = NULL;
-#ifdef _HAVE_STDC
-  va_start (ap, fmt);
-#else
-  va_start (ap);
-#endif
-  ret = __svfscanf_r (ptr, &f, fmt, ap);
-  va_end (ap);
-  return ret;
-}
diff --git a/newlib/libc/stdio/stdio.c b/newlib/libc/stdio/stdio.c
deleted file mode 100644
index bf304bc18..000000000
--- a/newlib/libc/stdio/stdio.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <sys/unistd.h>
-#include "local.h"
-
-/*
- * Small standard I/O/seek/close functions.
- * These maintain the `known seek offset' for seek optimisation.
- */
-
-_READ_WRITE_RETURN_TYPE
-__sread (cookie, buf, n)
-     _PTR cookie;
-     char *buf;
-     int n;
-{
-  register FILE *fp = (FILE *) cookie;
-  register int ret;
-
-#ifdef __SCLE
-  int oldmode = 0;
-  if (fp->_flags & __SCLE)
-    oldmode = setmode(fp->_file, O_BINARY);
-#endif
-
-  ret = _read_r (_REENT, fp->_file, buf, n);
-
-#ifdef __SCLE
-  if (oldmode)
-    setmode(fp->_file, oldmode);
-#endif
-
-  /* If the read succeeded, update the current offset.  */
-
-  if (ret >= 0)
-    fp->_offset += ret;
-  else
-    fp->_flags &= ~__SOFF;	/* paranoia */
-  return ret;
-}
-
-_READ_WRITE_RETURN_TYPE
-__swrite (cookie, buf, n)
-     _PTR cookie;
-     char _CONST *buf;
-     int n;
-{
-  register FILE *fp = (FILE *) cookie;
-  int w;
-#ifdef __SCLE
-  int oldmode=0;
-#endif
-
-  if (fp->_flags & __SAPP)
-    (void) _lseek_r (_REENT, fp->_file, (_off_t) 0, SEEK_END);
-  fp->_flags &= ~__SOFF;	/* in case O_APPEND mode is set */
-
-#ifdef __SCLE
-  if (fp->_flags & __SCLE)
-    oldmode = setmode(fp->_file, O_BINARY);
-#endif
-
-  w = _write_r (_REENT, fp->_file, buf, n);
-
-#ifdef __SCLE
-  if (oldmode)
-    setmode(fp->_file, oldmode);
-#endif
-
-  return w;
-}
-
-_fpos_t
-__sseek (cookie, offset, whence)
-     _PTR cookie;
-     _fpos_t offset;
-     int whence;
-{
-  register FILE *fp = (FILE *) cookie;
-  register _off_t ret;
-
-  ret = _lseek_r (_REENT, fp->_file, (_off_t) offset, whence);
-  if (ret == -1L)
-    fp->_flags &= ~__SOFF;
-  else
-    {
-      fp->_flags |= __SOFF;
-      fp->_offset = ret;
-    }
-  return ret;
-}
-
-int
-__sclose (cookie)
-     _PTR cookie;
-{
-  FILE *fp = (FILE *) cookie;
-
-  return _close_r (_REENT, fp->_file);
-}
-
-#ifdef __SCLE
-int
-__stextmode (int fd)
-{
-#ifdef __CYGWIN__
-  return _cygwin_istext_for_stdio (fd);
-#else
-  return 0;
-#endif
-}
-#endif
diff --git a/newlib/libc/stdio/stdio.tex b/newlib/libc/stdio/stdio.tex
deleted file mode 100644
index 217aed1ef..000000000
--- a/newlib/libc/stdio/stdio.tex
+++ /dev/null
@@ -1,192 +0,0 @@
-@node Stdio
-@chapter Input and Output (@file{stdio.h}) 
-
-This chapter comprises functions to manage files
-or other input/output streams. Among these functions are subroutines
-to generate or scan strings according to specifications from a format string. 
-
-The underlying facilities for input and output depend on the host
-system, but these functions provide a uniform interface.
-
-The corresponding declarations are in @file{stdio.h}.
-
-The reentrant versions of these functions use macros
-
-@example
-_stdin_r(@var{reent})
-_stdout_r(@var{reent})
-_stderr_r(@var{reent})
-@end example
-
-@noindent
-instead of the globals @code{stdin}, @code{stdout}, and
-@code{stderr}.  The argument <[reent]> is a pointer to a reentrancy
-structure.
- 
-@menu  
-* clearerr::    Clear file or stream error indicator
-* fclose::      Close a file
-* feof::        Test for end of file
-* ferror::      Test whether read/write error has occurred
-* fflush::      Flush buffered file output
-* fgetc::       Get a character from a file or stream
-* fgetpos::     Record position in a stream or file
-* fgets::       Get character string from a file or stream
-* fiprintf::    Write formatted output to file (integer only)
-* fopen::       Open a file
-* fdopen::	Turn an open file into a stream
-* fputc::       Write a character on a stream or file
-* fputs::       Write a character string in a file or stream
-* fread::       Read array elements from a file
-* freopen::     Open a file using an existing file descriptor
-* fseek::       Set file position
-* fsetpos::     Restore position of a stream or file
-* ftell::       Return position in a stream or file
-* fwrite::      Write array elements from memory to a file or stream
-* getc::        Get a character from a file or stream (macro)
-* getchar::     Get a character from standard input (macro)
-* gets::        Get character string from standard input (obsolete)
-* getw::        Get a word (int) from a file or stream
-* iprintf::     Write formatted output (integer only)
-* mktemp::      Generate unused file name
-* perror::      Print an error message on standard error
-* putc::        Write a character on a stream or file (macro)
-* putchar::     Write a character on standard output (macro)
-* puts::        Write a character string on standard output
-* putw::        Write a word (int) to a file or stream
-* remove::      Delete a file's name
-* rename::      Rename a file
-* rewind::      Reinitialize a file or stream
-* setbuf::      Specify full buffering for a file or stream
-* setvbuf::     Specify buffering for a file or stream
-* siprintf::    Write formatted output (integer only)
-* printf::      Write formatted output
-* scanf::       Scan and format input
-* tmpfile::     Create a temporary file
-* tmpnam::      Generate name for a temporary file
-* vprintf::     Format variable argument list
-@end menu 
-
-@page
-@include stdio/clearerr.def
-
-@page
-@include stdio/fclose.def
-
-@page
-@include stdio/feof.def
-
-@page
-@include stdio/ferror.def
-
-@page
-@include stdio/fflush.def
-
-@page 
-@include stdio/fgetc.def 
-
-@page
-@include stdio/fgetpos.def
-
-@page 
-@include stdio/fgets.def 
-
-@page
-@include stdio/fiprintf.def
-
-@page
-@include stdio/fopen.def
-
-@page
-@include stdio/fdopen.def
-
-@page
-@include stdio/fputc.def
-
-@page
-@include stdio/fputs.def
-
-@page
-@include stdio/fread.def
-
-@page
-@include stdio/freopen.def
-
-@page
-@include stdio/fseek.def
-
-@page
-@include stdio/fsetpos.def
-
-@page
-@include stdio/ftell.def
-
-@page
-@include stdio/fwrite.def
-
-@page 
-@include stdio/getc.def 
-
-@page
-@include stdio/getchar.def 
-
-@page 
-@include stdio/gets.def
-
-@page 
-@include stdio/getw.def 
-
-@page
-@include stdio/iprintf.def 
-
-@page
-@include stdio/mktemp.def
-
-@page
-@include stdio/perror.def
-
-@page
-@include stdio/putc.def
-
-@page
-@include stdio/putchar.def
-
-@page
-@include stdio/puts.def
-
-@page 
-@include stdio/putw.def 
-
-@page
-@include stdio/remove.def
-
-@page
-@include stdio/rename.def
-
-@page
-@include stdio/rewind.def
-
-@page
-@include stdio/setbuf.def
-
-@page
-@include stdio/setvbuf.def
-
-@page 
-@include stdio/siprintf.def 
-
-@page 
-@include stdio/sprintf.def 
-
-@page
-@include stdio/sscanf.def 
-
-@page
-@include stdio/tmpfile.def
-
-@page
-@include stdio/tmpnam.def
-
-@page 
-@include stdio/vfprintf.def 
-
diff --git a/newlib/libc/stdio/tmpfile.c b/newlib/libc/stdio/tmpfile.c
deleted file mode 100644
index c38e61d34..000000000
--- a/newlib/libc/stdio/tmpfile.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-FUNCTION
-<<tmpfile>>---create a temporary file
-
-INDEX
-	tmpfile
-INDEX
-	_tmpfile_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *tmpfile(void);
-
-	FILE *_tmpfile_r(void *<[reent]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *tmpfile();
-
-	FILE *_tmpfile_r(<[reent]>)
-	char *<[reent]>;
-
-DESCRIPTION
-Create a temporary file (a file which will be deleted automatically),
-using a name generated by <<tmpnam>>.  The temporary file is opened with
-the mode <<"wb+">>, permitting you to read and write anywhere in it
-as a binary file (without any data transformations the host system may
-perform for text files).
-
-The alternate function <<_tmpfile_r>> is a reentrant version.  The
-argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<tmpfile>> normally returns a pointer to the temporary file.  If no
-temporary file could be created, the result is NULL, and <<errno>>
-records the reason for failure.
-
-PORTABILITY
-Both ANSI C and the System V Interface Definition (Issue 2) require
-<<tmpfile>>.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<getpid>>,
-<<isatty>>, <<lseek>>, <<open>>, <<read>>, <<sbrk>>, <<write>>.
-
-<<tmpfile>> also requires the global pointer <<environ>>.
-*/
-
-#include <stdio.h>
-#include <errno.h>
-
-FILE *
-_DEFUN (_tmpfile_r, (ptr),
-	struct _reent *ptr)
-{
-  FILE *fp;
-  int e;
-  char *f;
-  char buf[L_tmpnam];
-
-  if ((f = _tmpnam_r (ptr, buf)) == NULL)
-    return NULL;
-  fp = _fopen_r (ptr, f, "wb+");
-  e = ptr->_errno;
-  _CAST_VOID _remove_r (ptr, f);
-  ptr->_errno = e;
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN_VOID (tmpfile)
-{
-  return _tmpfile_r (_REENT);
-}
-
-#endif
diff --git a/newlib/libc/stdio/tmpnam.c b/newlib/libc/stdio/tmpnam.c
deleted file mode 100644
index ec346c878..000000000
--- a/newlib/libc/stdio/tmpnam.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * tmpname.c
- * Original Author:	G. Haley
- */
-
-/*
-FUNCTION
-<<tmpnam>>, <<tempnam>>---name for a temporary file
-
-INDEX
-	tmpnam
-INDEX
-	tempnam
-INDEX
-	_tmpnam_r
-INDEX
-	_tempnam_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	char *tmpnam(char *<[s]>);
-	char *tempnam(char *<[dir]>, char *<[pfx]>);
-	char *_tmpnam_r(void *<[reent]>, char *<[s]>);
-	char *_tempnam_r(void *<[reent]>, char *<[dir]>, char *<[pfx]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	char *tmpnam(<[s]>)
-	char *<[s]>;
-
-	char *tempnam(<[dir]>, <[pfx]>)
-	char *<[dir]>;
-	char *<[pfx]>;
-
-	char *_tmpnam_r(<[reent]>, <[s]>)
-	char *<[reent]>;
-	char *<[s]>;
-
-	char *_tempnam_r(<[reent]>, <[dir]>, <[pfx]>)
-	char *<[reent]>;
-	char *<[dir]>;
-	char *<[pfx]>;
-
-DESCRIPTION
-Use either of these functions to generate a name for a temporary file.
-The generated name is guaranteed to avoid collision with other files
-(for up to <<TMP_MAX>> calls of either function).
-
-<<tmpnam>> generates file names with the value of <<P_tmpdir>>
-(defined in `<<stdio.h>>') as the leading directory component of the path.
-
-You can use the <<tmpnam>> argument <[s]> to specify a suitable area
-of memory for the generated filename; otherwise, you can call
-<<tmpnam(NULL)>> to use an internal static buffer.
-
-<<tempnam>> allows you more control over the generated filename: you
-can use the argument <[dir]> to specify the path to a directory for
-temporary files, and you can use the argument <[pfx]> to specify a
-prefix for the base filename.
-
-If <[dir]> is <<NULL>>, <<tempnam>> will attempt to use the value of
-environment variable <<TMPDIR>> instead; if there is no such value,
-<<tempnam>> uses the value of <<P_tmpdir>> (defined in `<<stdio.h>>').
-
-If you don't need any particular prefix to the basename of temporary
-files, you can pass <<NULL>> as the <[pfx]> argument to <<tempnam>>.
-
-<<_tmpnam_r>> and <<_tempnam_r>> are reentrant versions of <<tmpnam>>
-and <<tempnam>> respectively.  The extra argument <[reent]> is a
-pointer to a reentrancy structure.
-
-WARNINGS
-The generated filenames are suitable for temporary files, but do not
-in themselves make files temporary.  Files with these names must still
-be explicitly removed when you no longer want them.
-
-If you supply your own data area <[s]> for <<tmpnam>>, you must ensure
-that it has room for at least <<L_tmpnam>> elements of type <<char>>.
-
-RETURNS
-Both <<tmpnam>> and <<tempnam>> return a pointer to the newly
-generated filename.
-
-PORTABILITY
-ANSI C requires <<tmpnam>>, but does not specify the use of
-<<P_tmpdir>>.  The System V Interface Definition (Issue 2) requires
-both <<tmpnam>> and <<tempnam>>.
-
-Supporting OS subroutines required: <<close>>,  <<fstat>>, <<getpid>>,
-<<isatty>>, <<lseek>>, <<open>>, <<read>>, <<sbrk>>, <<write>>.
-
-The global pointer <<environ>> is also required.
-*/
-
-#include <_ansi.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <reent.h>
-#include <errno.h>
-
-/* Try to open the file specified, if it can't be opened then try
-   another one.  Return nonzero if successful, otherwise zero.  */
-
-static int
-worker (ptr, result, part1, part2, part3, part4)
-     struct _reent *ptr;
-     char *result;
-     _CONST char *part1;
-     _CONST char *part2;
-     int part3;
-     int *part4;
-{
-  /*  Generate the filename and make sure that there isn't one called
-      it already.  */
-
-  while (1)
-    {
-      int t;
-      _sprintf_r (ptr, result, "%s/%s%x.%x", part1, part2, part3, *part4);
-      (*part4)++;
-      t = _open_r (ptr, result, O_RDONLY, 0);
-      if (t == -1)
-	{
-	  if (ptr->_errno == ENOSYS)
-	    {
-	      result[0] = '\0';
-	      return 0;
-	    }
-	  break;
-	}
-      _close_r (ptr, t);
-    }
-  return 1;
-}
-
-char *
-_DEFUN (_tmpnam_r, (p, s),
-	struct _reent *p _AND
-	char *s)
-{
-  char *result;
-  int pid;
-
-  if (s == NULL)
-    {
-      /* ANSI states we must use an internal static buffer if s is NULL */
-      _REENT_CHECK_EMERGENCY(p);
-      result = _REENT_EMERGENCY(p);
-    }
-  else
-    {
-      result = s;
-    }
-  pid = _getpid_r (p);
-
-  if (worker (p, result, P_tmpdir, "t", pid, &p->_inc))
-    {
-      p->_inc++;
-      return result;
-    }
-
-  return NULL;
-}
-
-char *
-_DEFUN (_tempnam_r, (p, dir, pfx),
-	struct _reent *p _AND
-	_CONST char *dir _AND
-	_CONST char *pfx)
-{
-  char *filename;
-  int length;
-  _CONST char *prefix = (pfx) ? pfx : "";
-  if (dir == NULL && (dir = getenv ("TMPDIR")) == NULL)
-    dir = P_tmpdir;
-
-  /* two 8 digit numbers + . / */
-  length = strlen (dir) + strlen (prefix) + (4 * sizeof (int)) + 2 + 1;
-
-  filename = _malloc_r (p, length);
-  if (filename)
-    {
-      if (! worker (p, filename, dir, prefix,
-		    _getpid_r (p) ^ (int) (_POINTER_INT) p, &p->_inc))
-	return NULL;
-    }
-  return filename;
-}
-
-#ifndef _REENT_ONLY
-
-char *
-_DEFUN (tempnam, (dir, pfx),
-	_CONST char *dir _AND
-	_CONST char *pfx)
-{
-  return _tempnam_r (_REENT, dir, pfx);
-}
-
-char *
-_DEFUN (tmpnam, (s),
-	char *s)
-{
-  return _tmpnam_r (_REENT, s);
-}
-
-#endif
diff --git a/newlib/libc/stdio/ungetc.c b/newlib/libc/stdio/ungetc.c
deleted file mode 100644
index 5ca98251d..000000000
--- a/newlib/libc/stdio/ungetc.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "local.h"
-
-/*
- * Expand the ungetc buffer `in place'.  That is, adjust fp->_p when
- * the buffer moves, so that it points the same distance from the end,
- * and move the bytes in the buffer around as necessary so that they
- * are all at the end (stack-style).
- */
-
-/*static*/
-int
-__submore (fp)
-     register FILE *fp;
-{
-  register int i;
-  register unsigned char *p;
-
-  if (fp->_ub._base == fp->_ubuf)
-    {
-      /*
-       * Get a new buffer (rather than expanding the old one).
-       */
-      if ((p = (unsigned char *) _malloc_r (_REENT, (size_t) BUFSIZ)) == NULL)
-	return EOF;
-      fp->_ub._base = p;
-      fp->_ub._size = BUFSIZ;
-      p += BUFSIZ - sizeof (fp->_ubuf);
-      for (i = sizeof (fp->_ubuf); --i >= 0;)
-	p[i] = fp->_ubuf[i];
-      fp->_p = p;
-      return 0;
-    }
-  i = fp->_ub._size;
-  p = (unsigned char *) _realloc_r (_REENT, (_PTR) (fp->_ub._base), i << 1);
-  if (p == NULL)
-    return EOF;
-  (void) memcpy ((void *) (p + i), (void *) p, (size_t) i);
-  fp->_p = p + i;
-  fp->_ub._base = p;
-  fp->_ub._size = i << 1;
-  return 0;
-}
-
-int
-ungetc (c, fp)
-     int c;
-     register FILE *fp;
-{
-  if (c == EOF)
-    return (EOF);
-
-  _flockfile(fp);
-  
-  /* Ensure stdio has been initialized.
-     ??? Might be able to remove this as some other stdio routine should
-     have already been called to get the char we are un-getting.  */
-
-  CHECK_INIT (fp);
-
-  /* After ungetc, we won't be at eof anymore */
-  fp->_flags &= ~__SEOF;
-
-  if ((fp->_flags & __SRD) == 0)
-    {
-      /*
-       * Not already reading: no good unless reading-and-writing.
-       * Otherwise, flush any current write stuff.
-       */
-      if ((fp->_flags & __SRW) == 0)
-        {
-          _funlockfile(fp);
-          return EOF;
-        }
-      if (fp->_flags & __SWR)
-	{
-	  if (fflush (fp))
-            {
-              _funlockfile(fp);
-              return EOF;
-            }
-	  fp->_flags &= ~__SWR;
-	  fp->_w = 0;
-	  fp->_lbfsize = 0;
-	}
-      fp->_flags |= __SRD;
-    }
-  c = (unsigned char) c;
-
-  /*
-   * If we are in the middle of ungetc'ing, just continue.
-   * This may require expanding the current ungetc buffer.
-   */
-
-  if (HASUB (fp))
-    {
-      if (fp->_r >= fp->_ub._size && __submore (fp))
-        {
-          _funlockfile(fp);
-          return EOF;
-        }
-      *--fp->_p = c;
-      fp->_r++;
-      _funlockfile(fp);
-      return c;
-    }
-
-  /*
-   * If we can handle this by simply backing up, do so,
-   * but never replace the original character.
-   * (This makes sscanf() work when scanning `const' data.)
-   */
-
-  if (fp->_bf._base != NULL && fp->_p > fp->_bf._base && fp->_p[-1] == c)
-    {
-      fp->_p--;
-      fp->_r++;
-      _funlockfile(fp);
-      return c;
-    }
-
-  /*
-   * Create an ungetc buffer.
-   * Initially, we will use the `reserve' buffer.
-   */
-
-  fp->_ur = fp->_r;
-  fp->_up = fp->_p;
-  fp->_ub._base = fp->_ubuf;
-  fp->_ub._size = sizeof (fp->_ubuf);
-  fp->_ubuf[sizeof (fp->_ubuf) - 1] = c;
-  fp->_p = &fp->_ubuf[sizeof (fp->_ubuf) - 1];
-  fp->_r = 1;
-  _funlockfile(fp);
-  return c;
-}
diff --git a/newlib/libc/stdio/vasprintf.c b/newlib/libc/stdio/vasprintf.c
deleted file mode 100644
index 539e23114..000000000
--- a/newlib/libc/stdio/vasprintf.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* doc in vfprintf.c */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* This code was based on vsprintf.c */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <limits.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vasprintf, (strp, fmt, ap),
-     char **strp _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR | __SMBF;
-  f._bf._base = f._p = NULL;
-  f._bf._size = f._w = 0;
-  f._file = -1;  /* No file. */
-  ret = _vfprintf_r (_REENT, &f, fmt, ap);
-  *f._p = 0;
-  *strp = f._bf._base;
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vasprintf_r, (ptr, strp, fmt, ap),
-     struct _reent *ptr _AND
-     char **strp _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR | __SMBF ;
-  f._bf._base = f._p = NULL;
-  f._bf._size = f._w = 0;
-  f._file = -1;  /* No file. */
-  ret = _vfprintf_r (ptr, &f, fmt, ap);
-  *f._p = 0;
-  *strp = f._bf._base;
-  return ret;
-}
-
diff --git a/newlib/libc/stdio/vfieeefp.h b/newlib/libc/stdio/vfieeefp.h
deleted file mode 100644
index 1b240fcde..000000000
--- a/newlib/libc/stdio/vfieeefp.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/****************************************************************
- *
- * The author of this software is David M. Gay.
- *
- * Copyright (c) 1991 by AT&T.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- ***************************************************************/
-
-/* Please send bug reports to
-	David M. Gay
-	AT&T Bell Laboratories, Room 2C-463
-	600 Mountain Avenue
-	Murray Hill, NJ 07974-2070
-	U.S.A.
-	dmg@research.att.com or research!dmg
- */
-
-/* This header file is a modification of mprec.h that only contains floating
-   point union code. */
-
-#include <ieeefp.h>
-#include <math.h>
-#include <float.h>
-#include <errno.h>
-#include <sys/config.h>
-
-#ifdef __IEEE_LITTLE_ENDIAN
-#define IEEE_8087
-#endif
-
-#ifdef __IEEE_BIG_ENDIAN
-#define IEEE_MC68k
-#endif
-
-#ifdef __Z8000__
-#define Just_16
-#endif
-
-#ifdef Unsigned_Shifts
-#define Sign_Extend(a,b) if (b < 0) a |= (__uint32_t)0xffff0000;
-#else
-#define Sign_Extend(a,b) /*no-op*/
-#endif
-
-#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1
-Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined.
-#endif
-
-#ifdef WANT_IO_LONG_DBL
-/* If we are going to examine or modify specific bits in a long double using
-   the lword0 or lwordx macros, then we must wrap the long double inside
-   a union.  This is necessary to avoid undefined behavior according to
-   the ANSI C spec.  */
-
-#ifdef IEEE_8087
-#if LDBL_MANT_DIG == 24
-struct ldieee
-{
-  unsigned manh:23;
-  unsigned exp:8;
-  unsigned sign:1;
-};
-#elif LDBL_MANT_DIG == 53
-struct ldieee
-{
-  unsigned manl:20;
-  unsigned manh:32;
-  unsigned exp:11;
-  unsigned sign:1;
-};
-#elif LDBL_MANT_DIG == 64
-struct ldieee
-{
-  unsigned manl:32;
-  unsigned manh:32;
-  unsigned exp:15;
-  unsigned sign:1;
-};
-#elif LDBL_MANT_DIG > 64
-struct ldieee
-{
-  unsigned manl3:16;
-  unsigned manl2:32;
-  unsigned manl:32;
-  unsigned manh:32;
-  unsigned exp:15;
-  unsigned sign:1;
-};
-#endif /* LDBL_MANT_DIG */
-#else  /* !IEEE_8087 */
-#if LDBL_MANT_DIG == 24
-struct ldieee
-{
-  unsigned sign:1;
-  unsigned exp:8;
-  unsigned manh:23;
-};
-#elif LDBL_MANT_DIG == 53
-struct ldieee
-{
-  unsigned sign:1;
-  unsigned exp:11;
-  unsigned manh:32;
-  unsigned manl:20;
-};
-#elif LDBL_MANT_DIG == 64
-struct ldieee
-{
-  unsigned sign:1;
-  unsigned exp:15;
-  unsigned manh:32;
-  unsigned manl:32;
-};
-#elif LDBL_MANT_DIG > 64
-struct ldieee
-{
-  unsigned sign:1;
-  unsigned exp:15;
-  unsigned manh:32;
-  unsigned manl:32;
-  unsigned manl2:32;
-  unsigned manl3;16;
-};
-#endif /* LDBL_MANT_DIG */
-#endif /* !IEEE_8087 */
-#endif /* WANT_IO_LONG_DBL */
-
-/* If we are going to examine or modify specific bits in a double using
-   the word0 and/or word1 macros, then we must wrap the double inside
-   a union.  This is necessary to avoid undefined behavior according to
-   the ANSI C spec.  */
-union double_union
-{
-  double d;
-  __uint32_t i[2];
-};
-
-#ifdef IEEE_8087
-#define word0(x) (x.i[1])
-#define word1(x) (x.i[0])
-#else
-#define word0(x) (x.i[0])
-#define word1(x) (x.i[1])
-#endif
-
-/* #define P DBL_MANT_DIG */
-/* Ten_pmax = floor(P*log(2)/log(5)) */
-/* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 */
-/* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) */
-/* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */
-
-#if defined(IEEE_8087) + defined(IEEE_MC68k)
-#if defined (_DOUBLE_IS_32BITS) 
-#define Exp_shift   23
-#define Exp_shift1  23
-#define Exp_msk1    ((__uint32_t)0x00800000L)
-#define Exp_msk11   ((__uint32_t)0x00800000L)
-#define Exp_mask    ((__uint32_t)0x7f800000L)
-#define P    	    24
-#define Bias 	    127
-#if 0
-#define IEEE_Arith  /* it is, but the code doesn't handle IEEE singles yet */
-#endif
-#define Emin        (-126)
-#define Exp_1       ((__uint32_t)0x3f800000L)
-#define Exp_11      ((__uint32_t)0x3f800000L)
-#define Ebits 	    8
-#define Frac_mask   ((__uint32_t)0x007fffffL)
-#define Frac_mask1  ((__uint32_t)0x007fffffL)
-#define Ten_pmax    10
-#define Sign_bit    ((__uint32_t)0x80000000L)
-#define Ten_pmax    10
-#define Bletch	    2
-#define Bndry_mask  ((__uint32_t)0x007fffffL)
-#define Bndry_mask1 ((__uint32_t)0x007fffffL)
-#define LSB 1
-#define Sign_bit    ((__uint32_t)0x80000000L)
-#define Log2P 	    1
-#define Tiny0 	    0
-#define Tiny1 	    1
-#define Quick_max   5
-#define Int_max     6
-#define Infinite(x) (word0(x) == ((__uint32_t)0x7f800000L))
-#undef word0
-#undef word1
-
-#define word0(x) (x.i[0])
-#define word1(x) 0
-#else
-
-#define Exp_shift  20
-#define Exp_shift1 20
-#define Exp_msk1    ((__uint32_t)0x100000L)
-#define Exp_msk11   ((__uint32_t)0x100000L)
-#define Exp_mask  ((__uint32_t)0x7ff00000L)
-#define P 53
-#define Bias 1023
-#define IEEE_Arith
-#define Emin (-1022)
-#define Exp_1  ((__uint32_t)0x3ff00000L)
-#define Exp_11 ((__uint32_t)0x3ff00000L)
-#define Ebits 11
-#define Frac_mask  ((__uint32_t)0xfffffL)
-#define Frac_mask1 ((__uint32_t)0xfffffL)
-#define Ten_pmax 22
-#define Bletch 0x10
-#define Bndry_mask  ((__uint32_t)0xfffffL)
-#define Bndry_mask1 ((__uint32_t)0xfffffL)
-#define LSB 1
-#define Sign_bit ((__uint32_t)0x80000000L)
-#define Log2P 1
-#define Tiny0 0
-#define Tiny1 1
-#define Quick_max 14
-#define Int_max 14
-#define Infinite(x) (word0(x) == ((__uint32_t)0x7ff00000L)) /* sufficient test for here */
-#endif
-
-#else
-#undef  Sudden_Underflow
-#define Sudden_Underflow
-#ifdef IBM
-#define Exp_shift  24
-#define Exp_shift1 24
-#define Exp_msk1   ((__uint32_t)0x1000000L)
-#define Exp_msk11  ((__uint32_t)0x1000000L)
-#define Exp_mask  ((__uint32_t)0x7f000000L)
-#define P 14
-#define Bias 65
-#define Exp_1  ((__uint32_t)0x41000000L)
-#define Exp_11 ((__uint32_t)0x41000000L)
-#define Ebits 8	/* exponent has 7 bits, but 8 is the right value in b2d */
-#define Frac_mask  ((__uint32_t)0xffffffL)
-#define Frac_mask1 ((__uint32_t)0xffffffL)
-#define Bletch 4
-#define Ten_pmax 22
-#define Bndry_mask  ((__uint32_t)0xefffffL)
-#define Bndry_mask1 ((__uint32_t)0xffffffL)
-#define LSB 1
-#define Sign_bit ((__uint32_t)0x80000000L)
-#define Log2P 4
-#define Tiny0 ((__uint32_t)0x100000L)
-#define Tiny1 0
-#define Quick_max 14
-#define Int_max 15
-#else /* VAX */
-#define Exp_shift  23
-#define Exp_shift1 7
-#define Exp_msk1    0x80
-#define Exp_msk11   ((__uint32_t)0x800000L)
-#define Exp_mask  ((__uint32_t)0x7f80L)
-#define P 56
-#define Bias 129
-#define Exp_1  ((__uint32_t)0x40800000L)
-#define Exp_11 ((__uint32_t)0x4080L)
-#define Ebits 8
-#define Frac_mask  ((__uint32_t)0x7fffffL)
-#define Frac_mask1 ((__uint32_t)0xffff007fL)
-#define Ten_pmax 24
-#define Bletch 2
-#define Bndry_mask  ((__uint32_t)0xffff007fL)
-#define Bndry_mask1 ((__uint32_t)0xffff007fL)
-#define LSB ((__uint32_t)0x10000L)
-#define Sign_bit ((__uint32_t)0x8000L)
-#define Log2P 1
-#define Tiny0 0x80
-#define Tiny1 0
-#define Quick_max 15
-#define Int_max 15
-#endif
-#endif
-
-
diff --git a/newlib/libc/stdio/vfprintf.c b/newlib/libc/stdio/vfprintf.c
deleted file mode 100644
index 743d307a8..000000000
--- a/newlib/libc/stdio/vfprintf.c
+++ /dev/null
@@ -1,1713 +0,0 @@
-/*
-FUNCTION
-<<vprintf>>, <<vfprintf>>, <<vsprintf>>---format argument list
-
-INDEX
-	vprintf
-INDEX
-	vfprintf
-INDEX
-	vsprintf
-INDEX
-	vsnprintf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	#include <stdarg.h>
-	int vprintf(const char *<[fmt]>, va_list <[list]>);
-	int vfprintf(FILE *<[fp]>, const char *<[fmt]>, va_list <[list]>);
-	int vsprintf(char *<[str]>, const char *<[fmt]>, va_list <[list]>);
-	int vasprintf(char **<[strp]>, const char *<[fmt]>, va_list <[list]>);
-	int vsnprintf(char *<[str]>, size_t <[size]>, const char *<[fmt]>, va_list <[list]>);
-
-	int _vprintf_r(void *<[reent]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vfprintf_r(void *<[reent]>, FILE *<[fp]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vasprintf_r(void *<[reent]>, char **<[str]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vsprintf_r(void *<[reent]>, char *<[str]>, const char *<[fmt]>,
-                        va_list <[list]>);
-	int _vsnprintf_r(void *<[reent]>, char *<[str]>, size_t <[size]>, const char *<[fmt]>,
-                        va_list <[list]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	#include <varargs.h>
-	int vprintf( <[fmt]>, <[list]>)
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vfprintf(<[fp]>, <[fmt]>, <[list]>)
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vasprintf(<[strp]>, <[fmt]>, <[list]>)
-	char **<[strp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vsprintf(<[str]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vsnprintf(<[str]>, <[size]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-        size_t <[size]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vprintf_r(<[reent]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vfprintf_r(<[reent]>, <[fp]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vasprintf_r(<[reent]>, <[strp]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char **<[strp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vsprintf_r(<[reent]>, <[str]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vsnprintf_r(<[reent]>, <[str]>, <[size]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-        size_t <[size]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-DESCRIPTION
-<<vprintf>>, <<vfprintf>>, <<vasprintf>>, <<vsprintf>> and <<vsnprintf>> are 
-(respectively) variants of <<printf>>, <<fprintf>>, <<asprintf>>, <<sprintf>>,
-and <<snprintf>>.  They differ only in allowing their caller to pass the 
-variable argument list as a <<va_list>> object (initialized by <<va_start>>) 
-rather than directly accepting a variable number of arguments.
-
-RETURNS
-The return values are consistent with the corresponding functions:
-<<vasprintf>>/<<vsprintf>> returns the number of bytes in the output string,
-save that the concluding <<NULL>> is not counted.
-<<vprintf>> and <<vfprintf>> return the number of characters transmitted.
-If an error occurs, <<vprintf>> and <<vfprintf>> return <<EOF>> and
-<<vasprintf>> returns -1.  No error returns occur for <<vsprintf>>.
-
-PORTABILITY
-ANSI C requires all three functions.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Chris Torek.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-/*static char *sccsid = "from: @(#)vfprintf.c	5.50 (Berkeley) 12/16/92";*/
-static char *rcsid = "$Id$";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Actual printf innards.
- *
- * This code is large and complicated...
- */
-
-#ifdef INTEGER_ONLY
-#define VFPRINTF vfiprintf
-#define _VFPRINTF_R _vfiprintf_r
-#else
-#define VFPRINTF vfprintf
-#define _VFPRINTF_R _vfprintf_r
-#ifndef NO_FLOATING_POINT
-#define FLOATING_POINT
-#endif
-#endif
-
-#define _NO_LONGLONG
-#if defined WANT_PRINTF_LONG_LONG && defined __GNUC__
-# undef _NO_LONGLONG
-#endif
-
-#define _NO_POS_ARGS 
-#if defined WANT_IO_POS_ARGS
-# undef _NO_POS_ARGS
-#endif
-
-#include <_ansi.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include <reent.h>
-#include <wchar.h>
-#include <string.h>
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#include "local.h"
-#include "fvwrite.h"
-#include "vfieeefp.h"
-
-/* Currently a test is made to see if long double processing is warranted.
-   This could be changed in the future should the _ldtoa_r code be
-   preferred over _dtoa_r.  */
-#define _NO_LONGDBL
-#if defined WANT_IO_LONG_DBL && (LDBL_MANT_DIG > DBL_MANT_DIG)
-#undef _NO_LONGDBL
-#endif
-
-/*
- * Flush out all the vectors defined by the given uio,
- * then reset it so that it can be reused.
- */
-static int
-__sprint(fp, uio)
-	FILE *fp;
-	register struct __suio *uio;
-{
-	register int err;
-
-	if (uio->uio_resid == 0) {
-		uio->uio_iovcnt = 0;
-		return (0);
-	}
-	err = __sfvwrite(fp, uio);
-	uio->uio_resid = 0;
-	uio->uio_iovcnt = 0;
-	return (err);
-}
-
-/*
- * Helper function for `fprintf to unbuffered unix file': creates a
- * temporary buffer.  We only work on write-only files; this avoids
- * worries about ungetc buffers and so forth.
- */
-static int
-__sbprintf(fp, fmt, ap)
-	register FILE *fp;
-	const char *fmt;
-	va_list ap;
-{
-	int ret;
-	FILE fake;
-	unsigned char buf[BUFSIZ];
-
-	/* copy the important variables */
-	fake._flags = fp->_flags & ~__SNBF;
-	fake._file = fp->_file;
-	fake._cookie = fp->_cookie;
-	fake._write = fp->_write;
-
-	/* set up the buffer */
-	fake._bf._base = fake._p = buf;
-	fake._bf._size = fake._w = sizeof(buf);
-	fake._lbfsize = 0;	/* not actually used, but Just In Case */
-
-	/* do the work, then copy any error status */
-	ret = VFPRINTF(&fake, fmt, ap);
-	if (ret >= 0 && fflush(&fake))
-		ret = EOF;
-	if (fake._flags & __SERR)
-		fp->_flags |= __SERR;
-	return (ret);
-}
-
-
-#ifdef FLOATING_POINT
-#include <locale.h>
-#include <math.h>
-#include "floatio.h"
-
-#if ((MAXEXP+MAXFRACT+1) > MB_LEN_MAX)
-#  define BUF (MAXEXP+MAXFRACT+1) /* + decimal point */
-#else 
-#  define BUF MB_LEN_MAX
-#endif
-
-#define	DEFPREC		6
-
-#ifdef _NO_LONGDBL
-static char *cvt _PARAMS((struct _reent *, double, int, int, char *, int *, int, int *));
-#else
-static char *cvt _PARAMS((struct _reent *, _LONG_DOUBLE, int, int, char *, int *, int, int *));
-extern int  _ldcheck _PARAMS((_LONG_DOUBLE *));
-#endif
-
-static int exponent _PARAMS((char *, int, int));
-
-#else /* no FLOATING_POINT */
-
-#define	BUF		40
-
-#endif /* FLOATING_POINT */
-
-#ifndef _NO_LONGLONG
-#define quad_t long long
-#define u_quad_t unsigned long long
-#else
-#define quad_t long
-#define u_quad_t unsigned long
-#endif
-
-typedef quad_t * quad_ptr_t;
-typedef void *   void_ptr_t;
-typedef char *   char_ptr_t;
-typedef long *   long_ptr_t;
-typedef int  *   int_ptr_t;
-typedef short *  short_ptr_t;
-
-#ifndef _NO_POS_ARGS
-#define MAX_POS_ARGS 32
-
-union arg_val
-{
-  int val_int;
-  u_int val_u_int;
-  long val_long;
-  u_long val_u_long;
-  float val_float;
-  double val_double;
-  _LONG_DOUBLE val__LONG_DOUBLE;
-  int_ptr_t val_int_ptr_t;
-  short_ptr_t val_short_ptr_t;
-  long_ptr_t val_long_ptr_t;
-  char_ptr_t val_char_ptr_t;
-  quad_ptr_t val_quad_ptr_t;
-  void_ptr_t val_void_ptr_t;
-  quad_t val_quad_t;
-  u_quad_t val_u_quad_t;
-  wint_t val_wint_t;
-};
-
-static union arg_val *get_arg (struct _reent *data, int n, char *fmt, 
-                               va_list *ap, int *numargs, union arg_val *args, 
-			       int *arg_type, char **last_fmt);
-#endif /* !_NO_POS_ARGS */
-
-/*
- * Macros for converting digits to letters and vice versa
- */
-#define	to_digit(c)	((c) - '0')
-#define is_digit(c)	((unsigned)to_digit(c) <= 9)
-#define	to_char(n)	((n) + '0')
-
-/*
- * Flags used during conversion.
- */
-#define	ALT		0x001		/* alternate form */
-#define	HEXPREFIX	0x002		/* add 0x or 0X prefix */
-#define	LADJUST		0x004		/* left adjustment */
-#define	LONGDBL		0x008		/* long double */
-#define	LONGINT		0x010		/* long integer */
-#ifndef _NO_LONGLONG
-#define	QUADINT		0x020		/* quad integer */
-#else /* ifdef _NO_LONGLONG, make QUADINT equivalent to LONGINT, so
-	 that %lld behaves the same as %ld, not as %d, as expected if:
-	 sizeof (long long) = sizeof long > sizeof int  */
-#define	QUADINT		LONGINT
-#endif
-#define	SHORTINT	0x040		/* short integer */
-#define	ZEROPAD		0x080		/* zero (as opposed to blank) pad */
-#define FPT		0x100		/* Floating point number */
-
-int _EXFUN (_VFPRINTF_R, (struct _reent *, FILE *, _CONST char *, va_list));
-
-int 
-_DEFUN (VFPRINTF, (fp, fmt0, ap),
-	FILE * fp _AND
-	_CONST char *fmt0 _AND
-	va_list ap)
-{
-  int result;
-  _flockfile(fp);
-  CHECK_INIT (fp);
-  result = _VFPRINTF_R (_REENT, fp, fmt0, ap);
-  _funlockfile(fp);
-  return result;
-}
-
-int 
-_DEFUN (_VFPRINTF_R, (data, fp, fmt0, ap),
-	struct _reent *data _AND
-	FILE * fp _AND
-	_CONST char *fmt0 _AND
-	va_list ap)
-{
-	register char *fmt;	/* format string */
-	register int ch;	/* character from fmt */
-	register int n, m;	/* handy integers (short term usage) */
-	register char *cp;	/* handy char pointer (short term usage) */
-	register struct __siov *iovp;/* for PRINT macro */
-	register int flags;	/* flags as above */
-	char *fmt_anchor;       /* current format spec being processed */
-	int N;                  /* arg number */
-	int arg_index;          /* index into args processed directly */
-#ifndef _NO_POS_ARGS
-	int numargs;            /* number of varargs read */
-	char *saved_fmt;        /* saved fmt pointer */
-	union arg_val args[MAX_POS_ARGS];
-	int arg_type[MAX_POS_ARGS];
-	int is_pos_arg;         /* is current format positional? */
-	int old_is_pos_arg;     /* is current format positional? */
-#endif
-	int ret;		/* return value accumulator */
-	int width;		/* width from format (%8d), or 0 */
-	int prec;		/* precision from format (%.3d), or -1 */
-	char sign;		/* sign prefix (' ', '+', '-', or \0) */
-#ifdef FLOATING_POINT
-	char *decimal_point = localeconv()->decimal_point;
-	char softsign;		/* temporary negative sign for floats */
-#ifdef _NO_LONGDBL
-	union { int i; double d; } _double_ = {0};
-	#define _fpvalue (_double_.d)
-#else
-	union { int i; _LONG_DOUBLE ld; } _long_double_ = {0};
-	#define _fpvalue (_long_double_.ld)
-	int tmp;  
-#endif
-	int expt;		/* integer value of exponent */
-	int expsize = 0;	/* character count for expstr */
-	int ndig;		/* actual number of digits returned by cvt */
-	char expstr[7];		/* buffer for exponent string */
-#endif
-	u_quad_t _uquad;	/* integer arguments %[diouxX] */
-	enum { OCT, DEC, HEX } base;/* base for [diouxX] conversion */
-	int dprec;		/* a copy of prec if [diouxX], 0 otherwise */
-	int realsz;		/* field size expanded by dprec */
-	int size;		/* size of converted field or string */
-	char *xdigs = NULL;	/* digits for [xX] conversion */
-#define NIOV 8
-	struct __suio uio;	/* output information: summary */
-	struct __siov iov[NIOV];/* ... and individual io vectors */
-	char buf[BUF];		/* space for %c, %[diouxX], %[eEfgG] */
-	char ox[2];		/* space for 0x hex-prefix */
-#ifdef MB_CAPABLE
-	wchar_t wc;
-	mbstate_t state;        /* mbtowc calls from library must not change state */
-#endif
-	char *malloc_buf = NULL;/* handy pointer for malloced buffers */
-
-	/*
-	 * Choose PADSIZE to trade efficiency vs. size.  If larger printf
-	 * fields occur frequently, increase PADSIZE and make the initialisers
-	 * below longer.
-	 */
-#define	PADSIZE	16		/* pad chunk size */
-	static _CONST char blanks[PADSIZE] =
-	 {' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' '};
-	static _CONST char zeroes[PADSIZE] =
-	 {'0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0'};
-
-#ifdef MB_CAPABLE
-        memset (&state, '\0', sizeof (state));
-#endif
-	/*
-	 * BEWARE, these `goto error' on error, and PAD uses `n'.
-	 */
-#define	PRINT(ptr, len) { \
-	iovp->iov_base = (ptr); \
-	iovp->iov_len = (len); \
-	uio.uio_resid += (len); \
-	iovp++; \
-	if (++uio.uio_iovcnt >= NIOV) { \
-		if (__sprint(fp, &uio)) \
-			goto error; \
-		iovp = iov; \
-	} \
-}
-#define	PAD(howmany, with) { \
-	if ((n = (howmany)) > 0) { \
-		while (n > PADSIZE) { \
-			PRINT(with, PADSIZE); \
-			n -= PADSIZE; \
-		} \
-		PRINT(with, n); \
-	} \
-}
-#define	FLUSH() { \
-	if (uio.uio_resid && __sprint(fp, &uio)) \
-		goto error; \
-	uio.uio_iovcnt = 0; \
-	iovp = iov; \
-}
-
-	/* Macros to support positional arguments */
-#ifndef _NO_POS_ARGS
-#define GET_ARG(n, ap, type) \
-  ( is_pos_arg \
-      ? n < numargs \
-         ? args[n].val_##type \
-         : get_arg (data, n, fmt_anchor, &ap, &numargs, args, arg_type, &saved_fmt)->val_##type \
-      : arg_index++ < numargs \
-         ? args[n].val_##type \
-         : numargs < MAX_POS_ARGS \
-           ? args[numargs++].val_##type = va_arg(ap, type) \
-           : va_arg(ap, type) \
-  )
-#else
-#define GET_ARG(n, ap, type) (va_arg(ap, type))
-#endif
-    
-	/*
-	 * To extend shorts properly, we need both signed and unsigned
-	 * argument extraction methods.
-	 */
-#ifndef _NO_LONGLONG
-#define	SARG() \
-	(flags&QUADINT ? GET_ARG(N, ap, quad_t) : \
-	    flags&LONGINT ? GET_ARG(N, ap, long) : \
-	    flags&SHORTINT ? (long)(short)GET_ARG(N, ap, int) : \
-	    (long)GET_ARG(N, ap, int))
-#define	UARG() \
-	(flags&QUADINT ? GET_ARG(N, ap, u_quad_t) : \
-	    flags&LONGINT ? GET_ARG(N, ap, u_long) : \
-	    flags&SHORTINT ? (u_long)(u_short)GET_ARG(N, ap, int) : \
-	    (u_long)GET_ARG(N, ap, u_int))
-#else
-#define	SARG() \
-	(flags&LONGINT ? GET_ARG(N, ap, long) : \
-	    flags&SHORTINT ? (long)(short)GET_ARG(N, ap, int) : \
-	    (long)GET_ARG(N, ap, int))
-#define	UARG() \
-	(flags&LONGINT ? GET_ARG(N, ap, u_long) : \
-	    flags&SHORTINT ? (u_long)(u_short)GET_ARG(N, ap, int) : \
-	    (u_long)GET_ARG(N, ap, u_int))
-#endif
-
-	/* sorry, fprintf(read_only_file, "") returns EOF, not 0 */
-	if (cantwrite(fp))
-		return (EOF);
-
-	/* optimise fprintf(stderr) (and other unbuffered Unix files) */
-	if ((fp->_flags & (__SNBF|__SWR|__SRW)) == (__SNBF|__SWR) &&
-	    fp->_file >= 0)
-		return (__sbprintf(fp, fmt0, ap));
-
-	fmt = (char *)fmt0;
-	uio.uio_iov = iovp = iov;
-	uio.uio_resid = 0;
-	uio.uio_iovcnt = 0;
-	ret = 0;
-	arg_index = 0;
-#ifndef _NO_POS_ARGS
-	saved_fmt = NULL;
-	arg_type[0] = -1;
-	numargs = 0;
-	is_pos_arg = 0;
-#endif
-
-	/*
-	 * Scan the format for conversions (`%' character).
-	 */
-	for (;;) {
-	        cp = fmt;
-#ifdef MB_CAPABLE
-	        while ((n = _mbtowc_r(data, &wc, fmt, MB_CUR_MAX, &state)) > 0) {
-                    if (wc == '%')
-                        break;
-                    fmt += n;
-		}
-#else
-                while (*fmt != '\0' && *fmt != '%')
-                    fmt += 1;
-#endif
-		if ((m = fmt - cp) != 0) {
-			PRINT(cp, m);
-			ret += m;
-		}
-#ifdef MB_CAPABLE
-		if (n <= 0)
-                    goto done;
-#else
-                if (*fmt == '\0')
-                    goto done;
-#endif
-		fmt_anchor = fmt;
-		fmt++;		/* skip over '%' */
-
-		flags = 0;
-		dprec = 0;
-		width = 0;
-		prec = -1;
-		sign = '\0';
-		N = arg_index;
-#ifndef _NO_POS_ARGS
-		is_pos_arg = 0;
-#endif
-
-rflag:		ch = *fmt++;
-reswitch:	switch (ch) {
-		case ' ':
-			/*
-			 * ``If the space and + flags both appear, the space
-			 * flag will be ignored.''
-			 *	-- ANSI X3J11
-			 */
-			if (!sign)
-				sign = ' ';
-			goto rflag;
-		case '#':
-			flags |= ALT;
-			goto rflag;
-		case '*':
-			n = N;
-#ifndef _NO_POS_ARGS
-			/* we must check for positional arg used for dynamic width */
-			old_is_pos_arg = is_pos_arg;
-			is_pos_arg = 0;
-			if (is_digit(*fmt)) {
-				char *old_fmt = fmt;
-
-				n = 0;
-				ch = *fmt++;
-				do {
-					n = 10 * n + to_digit(ch);
-					ch = *fmt++;
-				} while (is_digit(ch));
-
-				if (ch == '$') {
-					if (n <= MAX_POS_ARGS) {
-						n -= 1;
-						is_pos_arg = 1;
-					}
-					else
-						goto error;
-				}
-				else {
-					fmt = old_fmt;
-					goto rflag;
-				}
-			}
-#endif /* !_NO_POS_ARGS */
-
-			/*
-			 * ``A negative field width argument is taken as a
-			 * - flag followed by a positive field width.''
-			 *	-- ANSI X3J11
-			 * They don't exclude field widths read from args.
-			 */
-			width = GET_ARG(n, ap, int);
-#ifndef _NO_POS_ARGS
-			is_pos_arg = old_is_pos_arg;
-#endif
-			if (width >= 0)
-				goto rflag;
-			width = -width;
-			/* FALLTHROUGH */
-		case '-':
-			flags |= LADJUST;
-			goto rflag;
-		case '+':
-			sign = '+';
-			goto rflag;
-		case '.':
-			if ((ch = *fmt++) == '*') {
-				n = N;
-#ifndef _NO_POS_ARGS
-				/* we must check for positional arg used for dynamic width */
-				old_is_pos_arg = is_pos_arg;
-				is_pos_arg = 0;
-				if (is_digit(*fmt)) {
-					char *old_fmt = fmt;
-
-					n = 0;
-					ch = *fmt++;
-					do {
-						n = 10 * n + to_digit(ch);
-						ch = *fmt++;
-					} while (is_digit(ch));
-
-					if (ch == '$') {
-						if (n <= MAX_POS_ARGS) {
-							n -= 1;
-							is_pos_arg = 1;
-						}
-						else
-							goto error;
-					}
-					else {
-						fmt = old_fmt;
-						goto rflag;
-					}
-				}
-#endif /* !_NO_POS_ARGS */
-				prec = GET_ARG(n, ap, int);
-#ifndef _NO_POS_ARGS
-				is_pos_arg = old_is_pos_arg;
-#endif
-				if (prec < 0)
-					prec = -1;
-				goto rflag;
-			}
-			n = 0;
-			while (is_digit(ch)) {
-				n = 10 * n + to_digit(ch);
-				ch = *fmt++;
-			}
-			prec = n < 0 ? -1 : n;
-			goto reswitch;
-		case '0':
-			/*
-			 * ``Note that 0 is taken as a flag, not as the
-			 * beginning of a field width.''
-			 *	-- ANSI X3J11
-			 */
-			flags |= ZEROPAD;
-			goto rflag;
-		case '1': case '2': case '3': case '4':
-		case '5': case '6': case '7': case '8': case '9':
-			n = 0;
-			do {
-				n = 10 * n + to_digit(ch);
-				ch = *fmt++;
-			} while (is_digit(ch));
-#ifndef _NO_POS_ARGS
-			if (ch == '$') {
-				if (n <= MAX_POS_ARGS) {
-					N = n - 1;
-					is_pos_arg = 1;
-					goto rflag;
-				}
-				else
-					goto error;
-			}
-#endif /* !_NO_POS_ARGS */
-			width = n;
-			goto reswitch;
-#ifdef FLOATING_POINT
-		case 'L':
-			flags |= LONGDBL;
-			goto rflag;
-#endif
-		case 'h':
-			flags |= SHORTINT;
-			goto rflag;
-		case 'l':
-			if (*fmt == 'l') {
-				fmt++;
-				flags |= QUADINT;
-			} else {
-				flags |= LONGINT;
-			}
-			goto rflag;
-		case 'q':
-			flags |= QUADINT;
-			goto rflag;
-		case 'c':
-		case 'C':
-			cp = buf;
-			if (ch == 'C' || (flags & LONGINT)) {
-				mbstate_t ps;
-
-				memset((void *)&ps, '\0', sizeof(mbstate_t));
-				if ((size = (int)wcrtomb(cp, 
-				    	       (wchar_t)GET_ARG(N, ap, wint_t), 
-					        &ps)) == -1)
-					goto error; 
-			}
-			else {
-				*cp = GET_ARG(N, ap, int);
-				size = 1;
-			}
-			sign = '\0';
-			break;
-		case 'D':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'd':
-		case 'i':
-			_uquad = SARG();
-#ifndef _NO_LONGLONG
-			if ((quad_t)_uquad < 0)
-#else
-			if ((long) _uquad < 0)
-#endif
-			{
-
-				_uquad = -_uquad;
-				sign = '-';
-			}
-			base = DEC;
-			goto number;
-#ifdef FLOATING_POINT
-		case 'e':
-		case 'E':
-		case 'f':
-		case 'g':
-		case 'G':
-			if (prec == -1) {
-				prec = DEFPREC;
-			} else if ((ch == 'g' || ch == 'G') && prec == 0) {
-				prec = 1;
-			}
-
-#ifdef _NO_LONGDBL
-			if (flags & LONGDBL) {
-				_fpvalue = (double) GET_ARG(N, ap, _LONG_DOUBLE);
-			} else {
-				_fpvalue = GET_ARG(N, ap, double);
-			}
-
-			/* do this before tricky precision changes */
-			if (isinf(_fpvalue)) {
-				if (_fpvalue < 0)
-					sign = '-';
-				cp = "Inf";
-				size = 3;
-				break;
-			}
-			if (isnan(_fpvalue)) {
-				cp = "NaN";
-				size = 3;
-				break;
-			}
-
-#else /* !_NO_LONGDBL */
-			
-			if (flags & LONGDBL) {
-				_fpvalue = GET_ARG(N, ap, _LONG_DOUBLE);
-			} else {
-				_fpvalue = (_LONG_DOUBLE)GET_ARG(N, ap, double);
-			}
-
-			/* do this before tricky precision changes */
-			tmp = _ldcheck (&_fpvalue);
-			if (tmp == 2) {
-				if (_fpvalue < 0)
-					sign = '-';
-				cp = "Inf";
-				size = 3;
-				break;
-			}
-			if (tmp == 1) {
-				cp = "NaN";
-				size = 3;
-				break;
-			}
-#endif /* !_NO_LONGDBL */
-
-			flags |= FPT;
-
-			cp = cvt(data, _fpvalue, prec, flags, &softsign,
-				&expt, ch, &ndig);
-
-			if (ch == 'g' || ch == 'G') {
-				if (expt <= -4 || expt > prec)
-					ch = (ch == 'g') ? 'e' : 'E';
-				else
-					ch = 'g';
-			} 
-			if (ch <= 'e') {	/* 'e' or 'E' fmt */
-				--expt;
-				expsize = exponent(expstr, expt, ch);
-				size = expsize + ndig;
-				if (ndig > 1 || flags & ALT)
-					++size;
-			} else if (ch == 'f') {		/* f fmt */
-				if (expt > 0) {
-					size = expt;
-					if (prec || flags & ALT)
-						size += prec + 1;
-				} else	/* "0.X" */
-					size = (prec || flags & ALT)
-						  ? prec + 2
-						  : 1;
-			} else if (expt >= ndig) {	/* fixed g fmt */
-				size = expt;
-				if (flags & ALT)
-					++size;
-			} else
-				size = ndig + (expt > 0 ?
-					1 : 2 - expt);
-
-			if (softsign)
-				sign = '-';
-			break;
-#endif /* FLOATING_POINT */
-		case 'n':
-#ifndef _NO_LONGLONG
-			if (flags & QUADINT)
-				*GET_ARG(N, ap, quad_ptr_t) = ret;
-			else 
-#endif
-			if (flags & LONGINT)
-				*GET_ARG(N, ap, long_ptr_t) = ret;
-			else if (flags & SHORTINT)
-				*GET_ARG(N, ap, short_ptr_t) = ret;
-			else
-				*GET_ARG(N, ap, int_ptr_t) = ret;
-			continue;	/* no output */
-		case 'O':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'o':
-			_uquad = UARG();
-			base = OCT;
-			goto nosign;
-		case 'p':
-			/*
-			 * ``The argument shall be a pointer to void.  The
-			 * value of the pointer is converted to a sequence
-			 * of printable characters, in an implementation-
-			 * defined manner.''
-			 *	-- ANSI X3J11
-			 */
-			/* NOSTRICT */
-			_uquad = (u_long)(unsigned _POINTER_INT)GET_ARG(N, ap, void_ptr_t);
-			base = HEX;
-			xdigs = "0123456789abcdef";
-			flags |= HEXPREFIX;
-			ch = 'x';
-			goto nosign;
-		case 's':
-		case 'S':
-			sign = '\0';
-			if ((cp = GET_ARG(N, ap, char_ptr_t)) == NULL) {
-				cp = "(null)";
-				size = 6;
-			}
-			else if (ch == 'S' || (flags & LONGINT)) {
-				mbstate_t ps;
-				_CONST wchar_t *wcp;
- 
-				wcp = (_CONST wchar_t *)cp;
-				size = m = 0;
-				memset((void *)&ps, '\0', sizeof(mbstate_t));
- 
-				/* Count number of bytes needed for multibyte
-				   string that will be produced from widechar
-				   string.  */
-  				if (prec >= 0) {
-					while (1) {
-						if (wcp[m] == L'\0')
-							break;
-						if ((n = (int)wcrtomb(buf, 
-							wcp[m], &ps)) == -1)
-							goto error;
-						if (n + size > prec)
-							break;
-						m += 1;
-						size += n;
-						if (size == prec)
-							break;
-					}
-				}
-				else {
-					if ((size = (int)wcsrtombs(NULL, &wcp, 
-								0, &ps)) == -1)
-						goto error; 
-					wcp = (_CONST wchar_t *)cp;
-				}
- 
-				if (size == 0)
-					break;
- 
-				if ((malloc_buf = 
-				    (char *)malloc(size + 1)) == NULL)
-					goto error;
-                             
-				/* Convert widechar string to multibyte string. */
-				memset((void *)&ps, '\0', sizeof(mbstate_t));
-				if (wcsrtombs(malloc_buf, &wcp, size, &ps) 
-				    != size)
-					goto error;
-				cp = malloc_buf;
-				cp[size] = '\0';
-			}
-			else if (prec >= 0) {
-				/*
-				 * can't use strlen; can only look for the
-				 * NUL in the first `prec' characters, and
-				 * strlen() will go further.
-				 */
-				char *p = memchr(cp, 0, prec);
-
-				if (p != NULL) {
-					size = p - cp;
-					if (size > prec)
-						size = prec;
-				} else
-					size = prec;
-			} else
-				size = strlen(cp);
-
-			break;
-		case 'U':
-			flags |= LONGINT;
-			/*FALLTHROUGH*/
-		case 'u':
-			_uquad = UARG();
-			base = DEC;
-			goto nosign;
-		case 'X':
-			xdigs = "0123456789ABCDEF";
-			goto hex;
-		case 'x':
-			xdigs = "0123456789abcdef";
-hex:			_uquad = UARG();
-			base = HEX;
-			/* leading 0x/X only if non-zero */
-			if (flags & ALT && _uquad != 0)
-				flags |= HEXPREFIX;
-
-			/* unsigned conversions */
-nosign:			sign = '\0';
-			/*
-			 * ``... diouXx conversions ... if a precision is
-			 * specified, the 0 flag will be ignored.''
-			 *	-- ANSI X3J11
-			 */
-number:			if ((dprec = prec) >= 0)
-				flags &= ~ZEROPAD;
-
-			/*
-			 * ``The result of converting a zero value with an
-			 * explicit precision of zero is no characters.''
-			 *	-- ANSI X3J11
-			 */
-			cp = buf + BUF;
-			if (_uquad != 0 || prec != 0) {
-				/*
-				 * Unsigned mod is hard, and unsigned mod
-				 * by a constant is easier than that by
-				 * a variable; hence this switch.
-				 */
-				switch (base) {
-				case OCT:
-					do {
-						*--cp = to_char(_uquad & 7);
-						_uquad >>= 3;
-					} while (_uquad);
-					/* handle octal leading 0 */
-					if (flags & ALT && *cp != '0')
-						*--cp = '0';
-					break;
-
-				case DEC:
-					/* many numbers are 1 digit */
-					while (_uquad >= 10) {
-						*--cp = to_char(_uquad % 10);
-						_uquad /= 10;
-					}
-					*--cp = to_char(_uquad);
-					break;
-
-				case HEX:
-					do {
-						*--cp = xdigs[_uquad & 15];
-						_uquad >>= 4;
-					} while (_uquad);
-					break;
-
-				default:
-					cp = "bug in vfprintf: bad base";
-					size = strlen(cp);
-					goto skipsize;
-				}
-			}
-                       /*
-			* ...result is to be converted to an 'alternate form'.
-			* For o conversion, it increases the precision to force
-			* the first digit of the result to be a zero."
-			*     -- ANSI X3J11
-			*
-			* To demonstrate this case, compile and run:
-                        *    printf ("%#.0o",0);
-			*/
-                       else if (base == OCT && (flags & ALT))
-                         *--cp = '0';
-
-			size = buf + BUF - cp;
-		skipsize:
-			break;
-		default:	/* "%?" prints ?, unless ? is NUL */
-			if (ch == '\0')
-				goto done;
-			/* pretend it was %c with argument ch */
-			cp = buf;
-			*cp = ch;
-			size = 1;
-			sign = '\0';
-			break;
-		}
-
-		/*
-		 * All reasonable formats wind up here.  At this point, `cp'
-		 * points to a string which (if not flags&LADJUST) should be
-		 * padded out to `width' places.  If flags&ZEROPAD, it should
-		 * first be prefixed by any sign or other prefix; otherwise,
-		 * it should be blank padded before the prefix is emitted.
-		 * After any left-hand padding and prefixing, emit zeroes
-		 * required by a decimal [diouxX] precision, then print the
-		 * string proper, then emit zeroes required by any leftover
-		 * floating precision; finally, if LADJUST, pad with blanks.
-		 *
-		 * Compute actual size, so we know how much to pad.
-		 * size excludes decimal prec; realsz includes it.
-		 */
-		realsz = dprec > size ? dprec : size;
-		if (sign)
-			realsz++;
-		else if (flags & HEXPREFIX)
-			realsz+= 2;
-
-		/* right-adjusting blank padding */
-		if ((flags & (LADJUST|ZEROPAD)) == 0)
-			PAD(width - realsz, blanks);
-
-		/* prefix */
-		if (sign) {
-			PRINT(&sign, 1);
-		} else if (flags & HEXPREFIX) {
-			ox[0] = '0';
-			ox[1] = ch;
-			PRINT(ox, 2);
-		}
-
-		/* right-adjusting zero padding */
-		if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD)
-			PAD(width - realsz, zeroes);
-
-		/* leading zeroes from decimal precision */
-		PAD(dprec - size, zeroes);
-
-		/* the string or number proper */
-#ifdef FLOATING_POINT
-		if ((flags & FPT) == 0) {
-			PRINT(cp, size);
-		} else {	/* glue together f_p fragments */
-			if (ch >= 'f') {	/* 'f' or 'g' */
-				if (_fpvalue == 0) {
-					/* kludge for __dtoa irregularity */
-					PRINT("0", 1);
-					if (expt < ndig || (flags & ALT) != 0) {
-						PRINT(decimal_point, 1);
-						PAD(ndig - 1, zeroes);
-					}
-				} else if (expt <= 0) {
-					PRINT("0", 1);
-					if(expt || ndig) {
-						PRINT(decimal_point, 1);
-						PAD(-expt, zeroes);
-						PRINT(cp, ndig);
-					}
-				} else if (expt >= ndig) {
-					PRINT(cp, ndig);
-					PAD(expt - ndig, zeroes);
-					if (flags & ALT)
-						PRINT(".", 1);
-				} else {
-					PRINT(cp, expt);
-					cp += expt;
-					PRINT(".", 1);
-					PRINT(cp, ndig-expt);
-				}
-			} else {	/* 'e' or 'E' */
-				if (ndig > 1 || flags & ALT) {
-					ox[0] = *cp++;
-					ox[1] = '.';
-					PRINT(ox, 2);
-                                       if (_fpvalue) {
-						PRINT(cp, ndig-1);
-					} else	/* 0.[0..] */
-						/* __dtoa irregularity */
-						PAD(ndig - 1, zeroes);
-				} else	/* XeYYY */
-					PRINT(cp, 1);
-				PRINT(expstr, expsize);
-			}
-		}
-#else
-		PRINT(cp, size);
-#endif
-		/* left-adjusting padding (always blank) */
-		if (flags & LADJUST)
-			PAD(width - realsz, blanks);
-
-		/* finally, adjust ret */
-		ret += width > realsz ? width : realsz;
-
-		FLUSH();	/* copy out the I/O vectors */
-
-                if (malloc_buf != NULL) {
-			free(malloc_buf);
-			malloc_buf = NULL;
-		}
-	}
-done:
-	FLUSH();
-error:
-	if (malloc_buf != NULL)
-		free(malloc_buf);
-	return (__sferror(fp) ? EOF : ret);
-	/* NOTREACHED */
-}
-
-#ifdef FLOATING_POINT
-
-#ifdef _NO_LONGDBL
-extern char *_dtoa_r _PARAMS((struct _reent *, double, int,
-			      int, int *, int *, char **));
-#else
-extern char *_ldtoa_r _PARAMS((struct _reent *, _LONG_DOUBLE, int,
-			      int, int *, int *, char **));
-#undef word0
-#define word0(x) ldword0(x)
-#endif
-
-static char *
-cvt(data, value, ndigits, flags, sign, decpt, ch, length)
-	struct _reent *data;
-#ifdef _NO_LONGDBL
-	double value;
-#else
-	_LONG_DOUBLE value;
-#endif
-	int ndigits, flags, *decpt, ch, *length;
-	char *sign;
-{
-	int mode, dsgn;
-	char *digits, *bp, *rve;
-#ifdef _NO_LONGDBL
-        union double_union tmp;
-#else
-        struct ldieee *ldptr;
-#endif
-
-	if (ch == 'f') {
-		mode = 3;		/* ndigits after the decimal point */
-	} else {
-		/* To obtain ndigits after the decimal point for the 'e' 
-		 * and 'E' formats, round to ndigits + 1 significant 
-		 * figures.
-		 */
-		if (ch == 'e' || ch == 'E') {
-			ndigits++;
-		}
-		mode = 2;		/* ndigits significant digits */
-	}
-
-#ifdef _NO_LONGDBL
-        tmp.d = value;
-
-	if (word0(tmp) & Sign_bit) { /* this will check for < 0 and -0.0 */
-		value = -value;
-		*sign = '-';
-        } else
-		*sign = '\000';
-
-	digits = _dtoa_r(data, value, mode, ndigits, decpt, &dsgn, &rve);
-#else /* !_NO_LONGDBL */
-	ldptr = (struct ldieee *)&value;
-	if (ldptr->sign) { /* this will check for < 0 and -0.0 */
-		value = -value;
-		*sign = '-';
-        } else
-		*sign = '\000';
-
-	digits = _ldtoa_r(data, value, mode, ndigits, decpt, &dsgn, &rve);
-#endif /* !_NO_LONGDBL */
-
-	if ((ch != 'g' && ch != 'G') || flags & ALT) {	/* Print trailing zeros */
-		bp = digits + ndigits;
-		if (ch == 'f') {
-			if (*digits == '0' && value)
-				*decpt = -ndigits + 1;
-			bp += *decpt;
-		}
-		if (value == 0)	/* kludge for __dtoa irregularity */
-			rve = bp;
-		while (rve < bp)
-			*rve++ = '0';
-	}
-	*length = rve - digits;
-	return (digits);
-}
-
-static int
-exponent(p0, exp, fmtch)
-	char *p0;
-	int exp, fmtch;
-{
-	register char *p, *t;
-	char expbuf[40];
-
-	p = p0;
-	*p++ = fmtch;
-	if (exp < 0) {
-		exp = -exp;
-		*p++ = '-';
-	}
-	else
-		*p++ = '+';
-	t = expbuf + 40;
-	if (exp > 9) {
-		do {
-			*--t = to_char(exp % 10);
-		} while ((exp /= 10) > 9);
-		*--t = to_char(exp);
-		for (; t < expbuf + 40; *p++ = *t++);
-	}
-	else {
-		*p++ = '0';
-		*p++ = to_char(exp);
-	}
-	return (p - p0);
-}
-#endif /* FLOATING_POINT */
-
-
-#ifndef _NO_POS_ARGS
-
-/* Positional argument support.
-   Written by Jeff Johnston
-
-   Copyright (c) 2002 Red Hat Incorporated.
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-      Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-
-      Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-      
-      The name of Red Hat Incorporated may not be used to endorse
-      or promote products derived from this software without specific
-      prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
-
-typedef enum {
-  ZERO,   /* '0' */
-  DIGIT,  /* '1-9' */
-  DOLLAR, /* '$' */
-  MODFR,  /* spec modifier */
-  SPEC,   /* format specifier */
-  DOT,    /* '.' */
-  STAR,   /* '*' */
-  FLAG,   /* format flag */
-  OTHER,  /* all other chars */ 
-  MAX_CH_CLASS /* place-holder */
-} CH_CLASS;
-
-typedef enum { 
-  START,  /* start */
-  SFLAG,  /* seen a flag */
-  WDIG,   /* seen digits in width area */
-  WIDTH,  /* processed width */
-  SMOD,   /* seen spec modifier */
-  SDOT,   /* seen dot */ 
-  VARW,   /* have variable width specifier */
-  VARP,   /* have variable precision specifier */
-  PREC,   /* processed precision */
-  VWDIG,  /* have digits in variable width specification */
-  VPDIG,  /* have digits in variable precision specification */
-  DONE,   /* done */   
-  MAX_STATE, /* place-holder */ 
-} STATE;
-
-typedef enum {
-  NOOP,  /* do nothing */
-  NUMBER, /* build a number from digits */
-  SKIPNUM, /* skip over digits */
-  GETMOD,  /* get and process format modifier */
-  GETARG,  /* get and process argument */
-  GETPW,   /* get variable precision or width */
-  GETPWB,  /* get variable precision or width and pushback fmt char */
-  GETPOS,  /* get positional parameter value */
-  PWPOS,   /* get positional parameter value for variable width or precision */
-} ACTION;
-
-const static CH_CLASS chclass[256] = {
-  /* 00-07 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 08-0f */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 10-17 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 18-1f */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 20-27 */  FLAG,    OTHER,   OTHER,   FLAG,    DOLLAR,  OTHER,   OTHER,   OTHER,
-  /* 28-2f */  OTHER,   OTHER,   STAR,    FLAG,    OTHER,   FLAG,    DOT,     OTHER,
-  /* 30-37 */  ZERO,    DIGIT,   DIGIT,   DIGIT,   DIGIT,   DIGIT,   DIGIT,   DIGIT,
-  /* 38-3f */  DIGIT,   DIGIT,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 40-47 */  OTHER,   OTHER,   OTHER,   SPEC,    SPEC,    SPEC,    OTHER,   SPEC, 
-  /* 48-4f */  OTHER,   OTHER,   OTHER,   OTHER,   MODFR,   OTHER,   OTHER,   SPEC, 
-  /* 50-57 */  OTHER,   OTHER,   OTHER,   SPEC,    OTHER,   SPEC,    OTHER,   SPEC, 
-  /* 58-5f */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 60-67 */  OTHER,   OTHER,   OTHER,   SPEC,    SPEC,    SPEC,    SPEC,    SPEC, 
-  /* 68-6f */  MODFR,   SPEC,    OTHER,   OTHER,   MODFR,   OTHER,   OTHER,   SPEC, 
-  /* 70-77 */  SPEC,    MODFR,   OTHER,   SPEC,    OTHER,   SPEC,    OTHER,   OTHER,
-  /* 78-7f */  SPEC,    OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 80-87 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 88-8f */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 90-97 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* 98-9f */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* a0-a7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* a8-af */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* b0-b7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* b8-bf */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* c0-c7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* c8-cf */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* d0-d7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* d8-df */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* e0-e7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* e8-ef */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* f0-f7 */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-  /* f8-ff */  OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,   OTHER,
-};
-
-const static STATE state_table[MAX_STATE][MAX_CH_CLASS] = {
-  /*             '0'     '1-9'     '$'     MODFR    SPEC    '.'     '*'    FLAG    OTHER */ 
-  /* START */  { SFLAG,   WDIG,    DONE,   SMOD,    DONE,   SDOT,  VARW,   SFLAG,  DONE },
-  /* SFLAG */  { SFLAG,   WDIG,    DONE,   SMOD,    DONE,   SDOT,  VARW,   SFLAG,  DONE },
-  /* WDIG  */  { DONE,    DONE,    WIDTH,  SMOD,    DONE,   SDOT,  DONE,   DONE,   DONE },
-  /* WIDTH */  { DONE,    DONE,    DONE,   SMOD,    DONE,   SDOT,  DONE,   DONE,   DONE },
-  /* SMOD  */  { DONE,    DONE,    DONE,   DONE,    DONE,   DONE,  DONE,   DONE,   DONE },
-  /* SDOT  */  { SDOT,    PREC,    DONE,   SMOD,    DONE,   DONE,  VARP,   DONE,   DONE },
-  /* VARW  */  { DONE,    VWDIG,   DONE,   SMOD,    DONE,   SDOT,  DONE,   DONE,   DONE },
-  /* VARP  */  { DONE,    VPDIG,   DONE,   SMOD,    DONE,   DONE,  DONE,   DONE,   DONE },
-  /* PREC  */  { DONE,    DONE,    DONE,   SMOD,    DONE,   DONE,  DONE,   DONE,   DONE },
-  /* VWDIG */  { DONE,    DONE,    WIDTH,  DONE,    DONE,   DONE,  DONE,   DONE,   DONE },
-  /* VPDIG */  { DONE,    DONE,    PREC,   DONE,    DONE,   DONE,  DONE,   DONE,   DONE },
-};
-
-const static ACTION action_table[MAX_STATE][MAX_CH_CLASS] = {
-  /*             '0'     '1-9'     '$'     MODFR    SPEC    '.'     '*'    FLAG    OTHER */ 
-  /* START */  { NOOP,    NUMBER,  NOOP,   GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* SFLAG */  { NOOP,    NUMBER,  NOOP,   GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* WDIG  */  { NOOP,    NOOP,    GETPOS, GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* WIDTH */  { NOOP,    NOOP,    NOOP,   GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* SMOD  */  { NOOP,    NOOP,    NOOP,   NOOP,    GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* SDOT  */  { NOOP,    SKIPNUM, NOOP,   GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* VARW  */  { NOOP,    NUMBER,  NOOP,   GETPW,   GETPWB, GETPW, NOOP,   NOOP,   NOOP },
-  /* VARP  */  { NOOP,    NUMBER,  NOOP,   GETPW,   GETPWB, NOOP,  NOOP,   NOOP,   NOOP },
-  /* PREC  */  { NOOP,    NOOP,    NOOP,   GETMOD,  GETARG, NOOP,  NOOP,   NOOP,   NOOP },
-  /* VWDIG */  { NOOP,    NOOP,    PWPOS,  NOOP,    NOOP,   NOOP,  NOOP,   NOOP,   NOOP },
-  /* VPDIG */  { NOOP,    NOOP,    PWPOS,  NOOP,    NOOP,   NOOP,  NOOP,   NOOP,   NOOP },
-};
-
-/* function to get positional parameter N where n = N - 1 */
-static union arg_val *
-get_arg (struct _reent *data, int n, char *fmt, va_list *ap, 
-         int *numargs_p, union arg_val *args, 
-	 int *arg_type, char **last_fmt) 
-{
-  int ch;
-  int number, flags;
-  int spec_type;
-  int numargs = *numargs_p;
-  CH_CLASS chtype;
-  STATE state, next_state;
-  ACTION action;
-  int pos, last_arg;
-  int max_pos_arg = n;
-  enum types { INT, LONG_INT, SHORT_INT, QUAD_INT, CHAR, CHAR_PTR, DOUBLE, LONG_DOUBLE, WIDE_CHAR };
-#ifdef MB_CAPABLE
-  wchar_t wc;
-  mbstate_t wc_state;
-  int nbytes; 
-#endif
-    
-  /* if this isn't the first call, pick up where we left off last time */
-  if (*last_fmt != NULL)
-    fmt = *last_fmt;
-
-#ifdef MB_CAPABLE
-  memset (&wc_state, '\0', sizeof (wc_state));
-#endif
-
-  /* we need to process either to end of fmt string or until we have actually
-     read the desired parameter from the vararg list. */
-  while (*fmt && n >= numargs)
-    {
-#ifdef MB_CAPABLE
-      while ((nbytes = _mbtowc_r(data, &wc, fmt, MB_CUR_MAX, &wc_state)) > 0) 
-	{
-	  fmt += nbytes;
-	  if (wc == '%') 
-	    break;
-	}
-
-      if (nbytes <= 0)
-	break;
-#else
-      while (*fmt != '\0' && *fmt != '%')
-	fmt += 1;
-
-      if (*fmt == '\0')
-	break;
-#endif
-      state = START;
-      flags = 0;
-      pos = -1;
-      number = 0;
-      spec_type = INT;
-
-      /* Use state/action table to process format specifiers.  We ignore invalid
-         formats and we are only interested in information that tells us how to
-         read the vararg list. */
-      while (state != DONE)
-	{
-	  ch = *fmt++;
-	  chtype = chclass[ch];
-	  next_state = state_table[state][chtype];
-	  action = action_table[state][chtype];
-	  state = next_state;
-	  
-	  switch (action)
-	    {
-	    case GETMOD:  /* we have format modifier */
-	      switch (ch)
-		{
-		case 'h':
-		  flags |= SHORTINT;
-		  break;
-		case 'L':
-		  flags |= LONGDBL;
-		  break;
-		case 'q':
-		  flags |= QUADINT;
-		  break;
-		case 'l':
-		default:
-		  if (*fmt == 'l')
-		    {
-		      flags |= QUADINT;
-		      ++fmt;
-		    }
-		  else
-		    flags |= LONGINT;
-		  break;
-		}
-	      break;
-	    case GETARG: /* we have format specifier */
-	      {
-		numargs &= (MAX_POS_ARGS - 1);
-		/* process the specifier and translate it to a type to fetch from varargs */
-		switch (ch)
-		  {
-		  case 'd':
-		  case 'i':
-		  case 'o':
-		  case 'x':
-		  case 'X':
-		  case 'u':
-		    if (flags & LONGINT)
-		      spec_type = LONG_INT;
-		    else if (flags & SHORTINT)
-		      spec_type = SHORT_INT;
-#ifndef _NO_LONGLONG
-		    else if (flags & QUADINT)
-		      spec_type = QUAD_INT;
-#endif
-		    else
-		      spec_type = INT;
-		    break;
-		  case 'D':
-		  case 'U':
-		  case 'O':
-		    spec_type = LONG_INT;
-		    break;
-		  case 'f':
-		  case 'g':
-		  case 'G':
-		  case 'E':
-		  case 'e':
-#ifndef _NO_LONGDBL
-		    if (flags & LONGDBL)
-		      spec_type = LONG_DOUBLE;
-		    else
-#endif
-		      spec_type = DOUBLE;
-		    break;
-		  case 's':
-		  case 'S':
-		  case 'p':
-		    spec_type = CHAR_PTR;
-		    break;
-		  case 'c':
-		    spec_type = CHAR;
-		    break;
-		  case 'C':
-		    spec_type = WIDE_CHAR;
-		    break;
-		  }
-
-		/* if we have a positional parameter, just store the type, otherwise
-		   fetch the parameter from the vararg list */
-		if (pos != -1)
-		  arg_type[pos] = spec_type;
-		else
-		  {
-		    switch (spec_type)
-		      {
-		      case LONG_INT:
-			args[numargs++].val_long = va_arg(*ap, long);
-			break;
-		      case QUAD_INT:
-			args[numargs++].val_quad_t = va_arg(*ap, quad_t);
-			break;
-		      case WIDE_CHAR:
-			args[numargs++].val_wint_t = va_arg(*ap, wint_t);
-			break;
-		      case CHAR:
-		      case SHORT_INT:
-		      case INT:
-			args[numargs++].val_int = va_arg(*ap, int);
-			break;
-		      case CHAR_PTR:
-			args[numargs++].val_char_ptr_t = va_arg(*ap, char *);
-			break;
-		      case DOUBLE:
-			args[numargs++].val_double = va_arg(*ap, double);
-			break;
-		      case LONG_DOUBLE:
-			args[numargs++].val__LONG_DOUBLE = va_arg(*ap, _LONG_DOUBLE);
-			break;
-		      }
-		  }
-	      }
-	      break;
-	    case GETPOS: /* we have positional specifier */
-	      if (arg_type[0] == -1)
-		memset (arg_type, 0, sizeof(int) * MAX_POS_ARGS);
-	      pos = number - 1;
-	      max_pos_arg = (max_pos_arg > pos ? max_pos_arg : pos);
-	      break;
-	    case PWPOS:  /* we have positional specifier for width or precision */
-	      if (arg_type[0] == -1)
-		memset (arg_type, 0, sizeof(int) * MAX_POS_ARGS);
-	      number -= 1;
-	      arg_type[number] = INT;
-	      max_pos_arg = (max_pos_arg > number ? max_pos_arg : number);
-	      break;
-	    case GETPWB: /* we require format pushback */
-	      --fmt;
-	      /* fallthrough */
-	    case GETPW:  /* we have a variable precision or width to acquire */
-	      args[numargs++].val_int = va_arg(*ap, int);
-	      break;
-	    case NUMBER: /* we have a number to process */
-	      number = (ch - '0');
-	      while ((ch = *fmt) != '\0' && is_digit(ch))
-		{
-		  number = number * 10 + (ch - '0');
-		  ++fmt;
-		}
-	      break;
-	    case SKIPNUM: /* we have a number to skip */
-	      while ((ch = *fmt) != '\0' && is_digit(ch))
-		++fmt;
-	      break;
-	    case NOOP:
-	    default:
-	      break; /* do nothing */
-	    }
-	}
-    }
-
-  /* process all arguments up to at least the one we are looking for and if we
-     have seen the end of the string, then process up to the max argument needed */
-  if (*fmt == '\0')
-    last_arg = max_pos_arg;
-  else
-    last_arg = n;
-
-  while (numargs <= last_arg)
-    {
-      switch (arg_type[numargs])
-	{
-	case LONG_INT:
-	  args[numargs++].val_long = va_arg(*ap, long);
-	  break;
-	case QUAD_INT:
-	  args[numargs++].val_quad_t = va_arg(*ap, quad_t);
-	  break;
-	case CHAR_PTR:
-	  args[numargs++].val_char_ptr_t = va_arg(*ap, char *);
-	  break;
-	case DOUBLE:
-	  args[numargs++].val_double = va_arg(*ap, double);
-	  break;
-	case LONG_DOUBLE:
-	  args[numargs++].val__LONG_DOUBLE = va_arg(*ap, _LONG_DOUBLE);
-	  break;
-	case WIDE_CHAR:
-	  args[numargs++].val_wint_t = va_arg(*ap, wint_t);
-	  break;
-	case INT:
-	case SHORT_INT:
-	case CHAR:
-	default:
-	  args[numargs++].val_int = va_arg(*ap, int);
-	  break;
-	}
-    }
-
-  /* alter the global numargs value and keep a reference to the last bit of the fmt
-     string we processed here because the caller will continue processing where we started */
-  *numargs_p = numargs;
-  *last_fmt = fmt;
-  return &args[n];
-}
-#endif /* !_NO_POS_ARGS */
diff --git a/newlib/libc/stdio/vfscanf.c b/newlib/libc/stdio/vfscanf.c
deleted file mode 100644
index fab2fbf3c..000000000
--- a/newlib/libc/stdio/vfscanf.c
+++ /dev/null
@@ -1,1169 +0,0 @@
-/*
-FUNCTION
-<<vscanf>>, <<vfscanf>>, <<vsscanf>>---format argument list
-
-INDEX
-	vscanf
-INDEX
-	vfscanf
-INDEX
-	vsscanf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	#include <stdarg.h>
-	int vscanf(const char *<[fmt]>, va_list <[list]>);
-	int vfscanf(FILE *<[fp]>, const char *<[fmt]>, va_list <[list]>);
-	int vsscanf(const char *<[str]>, const char *<[fmt]>, va_list <[list]>);
-
-	int _vscanf_r(void *<[reent]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-	int _vfscanf_r(void *<[reent]>, FILE *<[fp]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-	int _vsscanf_r(void *<[reent]>, const char *<[str]>, const char *<[fmt]>, 
-                       va_list <[list]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	#include <varargs.h>
-	int vscanf( <[fmt]>, <[ist]>)
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int vfscanf( <[fp]>, <[fmt]>, <[list]>)
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-	
-	int vsscanf( <[str]>, <[fmt]>, <[list]>)
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vscanf_r( <[reent]>, <[fmt]>, <[ist]>)
-	char *<[reent]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-	int _vfscanf_r( <[reent]>, <[fp]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	FILE *<[fp]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-	
-	int _vsscanf_r( <[reent]>, <[str]>, <[fmt]>, <[list]>)
-	char *<[reent]>;
-	char *<[str]>;
-	char *<[fmt]>;
-	va_list <[list]>;
-
-DESCRIPTION
-<<vscanf>>, <<vfscanf>>, and <<vsscanf>> are (respectively) variants
-of <<scanf>>, <<fscanf>>, and <<sscanf>>.  They differ only in 
-allowing their caller to pass the variable argument list as a 
-<<va_list>> object (initialized by <<va_start>>) rather than 
-directly accepting a variable number of arguments.
-
-RETURNS
-The return values are consistent with the corresponding functions:
-<<vscanf>> returns the number of input fields successfully scanned,
-converted, and stored; the return value does not include scanned
-fields which were not stored.  
-
-If <<vscanf>> attempts to read at end-of-file, the return value 
-is <<EOF>>.
-
-If no fields were stored, the return value is <<0>>.
-
-The routines <<_vscanf_r>>, <<_vfscanf_f>>, and <<_vsscanf_r>> are
-reentrant versions which take an additional first parameter which points to the
-reentrancy structure.
-
-PORTABILITY
-These are GNU extensions.
-
-Supporting OS subroutines required:
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <wchar.h>
-#include <string.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include "local.h"
-
-#ifndef	NO_FLOATING_POINT
-#define FLOATING_POINT
-#endif
-
-#ifdef FLOATING_POINT
-#include <float.h>
-
-/* Currently a test is made to see if long double processing is warranted.
-   This could be changed in the future should the _ldtoa_r code be
-   preferred over _dtoa_r.  */
-#define _NO_LONGDBL
-#if defined WANT_IO_LONG_DBL && (LDBL_MANT_DIG > DBL_MANT_DIG)
-#undef _NO_LONGDBL
-extern _LONG_DOUBLE _strtold _PARAMS((char *s, char **sptr));
-#endif
-
-#define _NO_LONGLONG
-#if defined WANT_PRINTF_LONG_LONG && defined __GNUC__
-# undef _NO_LONGLONG
-#endif
-
-#include "floatio.h"
-#define	BUF	(MAXEXP+MAXFRACT+3)	/* 3 = sign + decimal point + NUL */
-/* An upper bound for how long a long prints in decimal.  4 / 13 approximates
-   log (2).  Add one char for roundoff compensation and one for the sign.  */
-#define MAX_LONG_LEN ((CHAR_BIT * sizeof (long)  - 1) * 4 / 13 + 2)
-#else
-#define	BUF	40
-#endif
-
-/*
- * Flags used during conversion.
- */
-
-#define	LONG		0x01	/* l: long or double */
-#define	LONGDBL		0x02	/* L/ll: long double or long long */
-#define	SHORT		0x04	/* h: short */
-#define CHAR		0x08	/* hh: 8 bit integer */
-#define	SUPPRESS	0x10	/* suppress assignment */
-#define	POINTER		0x20	/* weird %p pointer (`fake hex') */
-#define	NOSKIP		0x40	/* do not skip blanks */
-
-/*
- * The following are used in numeric conversions only:
- * SIGNOK, NDIGITS, DPTOK, and EXPOK are for floating point;
- * SIGNOK, NDIGITS, PFXOK, and NZDIGITS are for integral.
- */
-
-#define	SIGNOK		0x80	/* +/- is (still) legal */
-#define	NDIGITS		0x100	/* no digits detected */
-
-#define	DPTOK		0x200	/* (float) decimal point is still legal */
-#define	EXPOK		0x400	/* (float) exponent (e+3, etc) still legal */
-
-#define	PFXOK		0x200	/* 0x prefix is (still) legal */
-#define	NZDIGITS	0x400	/* no zero digits detected */
-
-/*
- * Conversion types.
- */
-
-#define	CT_CHAR		0	/* %c conversion */
-#define	CT_CCL		1	/* %[...] conversion */
-#define	CT_STRING	2	/* %s conversion */
-#define	CT_INT		3	/* integer, i.e., strtol or strtoul */
-#define	CT_FLOAT	4	/* floating, i.e., strtod */
-
-#if 0
-#define u_char unsigned char
-#endif
-#define u_char char
-#define u_long unsigned long
-
-#ifndef _NO_LONGLONG
-typedef unsigned long long u_long_long;
-#endif
-
-/*static*/ u_char *__sccl ();
-
-/*
- * vfscanf
- */
-
-#define BufferEmpty (fp->_r <= 0 && __srefill(fp))
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vfscanf, (fp, fmt, ap), 
-    register FILE *fp _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  CHECK_INIT(fp);
-  return __svfscanf_r (_REENT, fp, fmt, ap);
-}
-
-int
-__svfscanf (fp, fmt0, ap)
-     register FILE *fp;
-     char _CONST *fmt0;
-     va_list ap;
-{
-  return __svfscanf_r (_REENT, fp, fmt0, ap);
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vfscanf_r, (data, fp, fmt, ap),
-    struct _reent *data _AND 
-    register FILE *fp _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  return __svfscanf_r (data, fp, fmt, ap);
-}
-
-
-int
-__svfscanf_r (rptr, fp, fmt0, ap)
-     struct _reent *rptr;
-     register FILE *fp;
-     char _CONST *fmt0;
-     va_list ap;
-{
-  register u_char *fmt = (u_char *) fmt0;
-  register int c;		/* character from format, or conversion */
-  register size_t width;	/* field width, or 0 */
-  register char *p;		/* points into all kinds of strings */
-  register int n;		/* handy integer */
-  register int flags;		/* flags as defined above */
-  register char *p0;		/* saves original value of p when necessary */
-  int nassigned;		/* number of fields assigned */
-  int nread;			/* number of characters consumed from fp */
-  int base = 0;			/* base argument to strtol/strtoul */
-  int nbytes = 1;               /* number of bytes read from fmt string */
-  wchar_t wc;                   /* wchar to use to read format string */
-
-  u_long (*ccfn) () = 0;	/* conversion function (strtol/strtoul) */
-  char ccltab[256];		/* character class table for %[...] */
-  char buf[BUF];		/* buffer for numeric conversions */
-  char *lptr;                   /* literal pointer */
-#ifdef MB_CAPABLE
-  mbstate_t state;                /* value to keep track of multibyte state */
-#endif
-
-  char *cp;
-  short *sp;
-  int *ip;
-  float *flp;
-  _LONG_DOUBLE *ldp;
-  double *dp;
-  long *lp;
-#ifndef _NO_LONGLONG
-  long long *llp;
-#else
-	u_long _uquad;
-#endif
-
-  /* `basefix' is used to avoid `if' tests in the integer scanner */
-  static _CONST short basefix[17] =
-    {10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16};
-
-  nassigned = 0;
-  nread = 0;
-  for (;;)
-    {
-#ifndef MB_CAPABLE
-      wc = *fmt;
-#else
-      memset (&state, '\0', sizeof (state));
-      nbytes = _mbtowc_r (rptr, &wc, fmt, MB_CUR_MAX, &state);
-#endif
-      fmt += nbytes;
-      if (wc == 0)
-	return nassigned;
-      if (nbytes == 1 && isspace (wc))
-	{
-	  for (;;)
-	    {
-	      if (BufferEmpty || !isspace (*fp->_p))
-		break;
-	      nread++, fp->_r--, fp->_p++;
-	    }
-	  continue;
-	}
-      if (wc != '%')
-	goto literal;
-      width = 0;
-      flags = 0;
-
-      /*
-       * switch on the format.  continue if done; break once format
-       * type is derived.
-       */
-
-    again:
-      c = *fmt++;
-
-      switch (c)
-	{
-	case '%':
-	literal:
-          lptr = fmt - nbytes;
-          for (n = 0; n < nbytes; ++n)
-            {
-	      if (BufferEmpty)
-	        goto input_failure;
-	      if (*fp->_p != *lptr)
-	        goto match_failure;
-	      fp->_r--, fp->_p++;
-	      nread++;
-              ++lptr;
-            }
-	  continue;
-
-	case '*':
-	  flags |= SUPPRESS;
-	  goto again;
-	case 'l':
-	  if (*fmt == 'l')	/* Check for 'll' = long long (SUSv3) */
-	    {
-	      ++fmt;
-	      flags |= LONGDBL;
-	    }
-	  else
-	    flags |= LONG;
-	  goto again;
-	case 'L':
-	  flags |= LONGDBL;
-	  goto again;
-	case 'h':
-	  if (*fmt == 'h')	/* Check for 'hh' = char int (SUSv3) */
-	    {
-	      ++fmt;
-	      flags |= CHAR;
-	    }
-	  else
-	    flags |= SHORT;
-	  goto again;
-
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  width = width * 10 + c - '0';
-	  goto again;
-
-	  /*
-	   * Conversions. Those marked `compat' are for
-	   * 4.[123]BSD compatibility.
-	   *
-	   * (According to ANSI, E and X formats are supposed to
-	   * the same as e and x.  Sorry about that.)
-	   */
-
-	case 'D':		/* compat */
-	  flags |= LONG;
-	  /* FALLTHROUGH */
-	case 'd':
-	  c = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 10;
-	  break;
-
-	case 'i':
-	  c = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 0;
-	  break;
-
-	case 'O':		/* compat */
-	  flags |= LONG;
-	  /* FALLTHROUGH */
-	case 'o':
-	  c = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 8;
-	  break;
-
-	case 'u':
-	  c = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 10;
-	  break;
-
-	case 'X':		/* compat   XXX */
-	case 'x':
-	  flags |= PFXOK;	/* enable 0x prefixing */
-	  c = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 16;
-	  break;
-
-#ifdef FLOATING_POINT
-	case 'E':		/* compat   XXX */
-	case 'G':		/* compat   XXX */
-/* ANSI says that E,G and X behave the same way as e,g,x */
-	  /* FALLTHROUGH */
-	case 'e':
-	case 'f':
-	case 'g':
-	  c = CT_FLOAT;
-	  break;
-#endif
-
-	case 's':
-	  c = CT_STRING;
-	  break;
-
-	case '[':
-	  fmt = __sccl (ccltab, fmt);
-	  flags |= NOSKIP;
-	  c = CT_CCL;
-	  break;
-
-	case 'c':
-	  flags |= NOSKIP;
-	  c = CT_CHAR;
-	  break;
-
-	case 'p':		/* pointer format is like hex */
-	  flags |= POINTER | PFXOK;
-	  c = CT_INT;
-	  ccfn = _strtoul_r;
-	  base = 16;
-	  break;
-
-	case 'n':
-	  if (flags & SUPPRESS)	/* ??? */
-	    continue;
-	  if (flags & CHAR)
-	    {
-	      cp = va_arg (ap, char *);
-	      *cp = nread;
-	    }
-	  else if (flags & SHORT)
-	    {
-	      sp = va_arg (ap, short *);
-	      *sp = nread;
-	    }
-	  else if (flags & LONG)
-	    {
-	      lp = va_arg (ap, long *);
-	      *lp = nread;
-	    }
-#ifndef _NO_LONGLONG
-	  else if (flags & LONGDBL)
-	    {
-	      llp = va_arg (ap, long long*);
-	      *llp = nread;
-	    }
-#endif
-	  else
-	    {
-	      ip = va_arg (ap, int *);
-	      *ip = nread;
-	    }
-	  continue;
-
-	  /*
-	   * Disgusting backwards compatibility hacks.	XXX
-	   */
-	case '\0':		/* compat */
-	  return EOF;
-
-	default:		/* compat */
-	  if (isupper (c))
-	    flags |= LONG;
-	  c = CT_INT;
-	  ccfn = (u_long (*)())_strtol_r;
-	  base = 10;
-	  break;
-	}
-
-      /*
-       * We have a conversion that requires input.
-       */
-      if (BufferEmpty)
-	goto input_failure;
-
-      /*
-       * Consume leading white space, except for formats that
-       * suppress this.
-       */
-      if ((flags & NOSKIP) == 0)
-	{
-	  while (isspace (*fp->_p))
-	    {
-	      nread++;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		goto input_failure;
-	    }
-	  /*
-	   * Note that there is at least one character in the
-	   * buffer, so conversions that do not set NOSKIP ca
-	   * no longer result in an input failure.
-	   */
-	}
-
-      /*
-       * Do the conversion.
-       */
-      switch (c)
-	{
-
-	case CT_CHAR:
-	  /* scan arbitrary characters (sets NOSKIP) */
-	  if (width == 0)
-	    width = 1;
-	  if (flags & SUPPRESS)
-	    {
-	      size_t sum = 0;
-
-	      for (;;)
-		{
-		  if ((n = fp->_r) < (int)width)
-		    {
-		      sum += n;
-		      width -= n;
-		      fp->_p += n;
-#ifndef CYGNUS_NEC
-		      if (__srefill (fp))
-			{
-#endif
-			  if (sum == 0)
-			    goto input_failure;
-			  break;
-#ifndef CYGNUS_NEC
-			}
-#endif
-		    }
-		  else
-		    {
-		      sum += width;
-		      fp->_r -= width;
-		      fp->_p += width;
-		      break;
-		    }
-		}
-	      nread += sum;
-	    }
-	  else
-	    {
-#ifdef CYGNUS_NEC
-	      /* Kludge city for the moment */
-	      char *dest = va_arg (ap, char *);
-	      int n = width;
-	      if (fp->_r == 0)
-		goto input_failure;
-
-	      while (n && fp->_r)
-		{
-		  *dest++ = *(fp->_p++);
-		  n--;
-		  fp->_r--;
-		  nread++;
-		}
-#else
-	      size_t r = fread ((_PTR) va_arg (ap, char *), 1, width, fp);
-
-	      if (r == 0)
-		goto input_failure;
-	      nread += r;
-#endif
-	      nassigned++;
-	    }
-	  break;
-
-	case CT_CCL:
-	  /* scan a (nonempty) character class (sets NOSKIP) */
-	  if (width == 0)
-	    width = ~0;		/* `infinity' */
-	  /* take only those things in the class */
-	  if (flags & SUPPRESS)
-	    {
-	      n = 0;
-	      while (ccltab[*fp->_p])
-		{
-		  n++, fp->_r--, fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    {
-		      if (n == 0)
-			goto input_failure;
-		      break;
-		    }
-		}
-	      if (n == 0)
-		goto match_failure;
-	    }
-	  else
-	    {
-	      p0 = p = va_arg (ap, char *);
-	      while (ccltab[*fp->_p])
-		{
-		  fp->_r--;
-		  *p++ = *fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    {
-		      if (p == p0)
-			goto input_failure;
-		      break;
-		    }
-		}
-	      n = p - p0;
-	      if (n == 0)
-		goto match_failure;
-	      *p = 0;
-	      nassigned++;
-	    }
-	  nread += n;
-	  break;
-
-	case CT_STRING:
-	  /* like CCL, but zero-length string OK, & no NOSKIP */
-	  if (width == 0)
-	    width = ~0;
-	  if (flags & SUPPRESS)
-	    {
-	      n = 0;
-	      while (!isspace (*fp->_p))
-		{
-		  n++, fp->_r--, fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    break;
-		}
-	      nread += n;
-	    }
-	  else
-	    {
-	      p0 = p = va_arg (ap, char *);
-	      while (!isspace (*fp->_p))
-		{
-		  fp->_r--;
-		  *p++ = *fp->_p++;
-		  if (--width == 0)
-		    break;
-		  if (BufferEmpty)
-		    break;
-		}
-	      *p = 0;
-	      nread += p - p0;
-	      nassigned++;
-	    }
-	  continue;
-
-	case CT_INT:
-	  /* scan an integer as if by strtol/strtoul */
-#ifdef hardway
-	  if (width == 0 || width > sizeof (buf) - 1)
-	    width = sizeof (buf) - 1;
-#else
-	  /* size_t is unsigned, hence this optimisation */
-	  if (--width > sizeof (buf) - 2)
-	    width = sizeof (buf) - 2;
-	  width++;
-#endif
-	  flags |= SIGNOK | NDIGITS | NZDIGITS;
-	  for (p = buf; width; width--)
-	    {
-	      c = *fp->_p;
-	      /*
-	       * Switch on the character; `goto ok' if we
-	       * accept it as a part of number.
-	       */
-	      switch (c)
-		{
-		  /*
-		   * The digit 0 is always legal, but is special.
-		   * For %i conversions, if no digits (zero or nonzero)
-		   * have been scanned (only signs), we will have base==0.
-		   * In that case, we should set it to 8 and enable 0x
-		   * prefixing. Also, if we have not scanned zero digits
-		   * before this, do not turn off prefixing (someone else
-		   * will turn it off if we have scanned any nonzero digits).
-		   */
-		case '0':
-		  if (base == 0)
-		    {
-		      base = 8;
-		      flags |= PFXOK;
-		    }
-		  if (flags & NZDIGITS)
-		    flags &= ~(SIGNOK | NZDIGITS | NDIGITS);
-		  else
-		    flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* 1 through 7 always legal */
-		case '1':
-		case '2':
-		case '3':
-		case '4':
-		case '5':
-		case '6':
-		case '7':
-		  base = basefix[base];
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* digits 8 and 9 ok iff decimal or hex */
-		case '8':
-		case '9':
-		  base = basefix[base];
-		  if (base <= 8)
-		    break;	/* not legal here */
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* letters ok iff hex */
-		case 'A':
-		case 'B':
-		case 'C':
-		case 'D':
-		case 'E':
-		case 'F':
-		case 'a':
-		case 'b':
-		case 'c':
-		case 'd':
-		case 'e':
-		case 'f':
-		  /* no need to fix base here */
-		  if (base <= 10)
-		    break;	/* not legal here */
-		  flags &= ~(SIGNOK | PFXOK | NDIGITS);
-		  goto ok;
-
-		  /* sign ok only as first character */
-		case '+':
-		case '-':
-		  if (flags & SIGNOK)
-		    {
-		      flags &= ~SIGNOK;
-		      goto ok;
-		    }
-		  break;
-
-		  /* x ok iff flag still set & 2nd char */
-		case 'x':
-		case 'X':
-		  if (flags & PFXOK && p == buf + 1)
-		    {
-		      base = 16;/* if %i */
-		      flags &= ~PFXOK;
-		      goto ok;
-		    }
-		  break;
-		}
-
-	      /*
-	       * If we got here, c is not a legal character
-	       * for a number.  Stop accumulating digits.
-	       */
-	      break;
-	    ok:
-	      /*
-	       * c is legal: store it and look at the next.
-	       */
-	      *p++ = c;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		break;		/* EOF */
-	    }
-	  /*
-	   * If we had only a sign, it is no good; push back the sign.
-	   * If the number ends in `x', it was [sign] '0' 'x', so push back
-	   * the x and treat it as [sign] '0'.
-	   */
-	  if (flags & NDIGITS)
-	    {
-	      if (p > buf)
-		_CAST_VOID ungetc (*(u_char *)-- p, fp);
-	      goto match_failure;
-	    }
-	  c = ((u_char *) p)[-1];
-	  if (c == 'x' || c == 'X')
-	    {
-	      --p;
-	      /*(void)*/ ungetc (c, fp);
-	    }
-	  if ((flags & SUPPRESS) == 0)
-	    {
-	      u_long res;
-
-	      *p = 0;
-	      res = (*ccfn) (rptr, buf, (char **) NULL, base);
-	      if (flags & POINTER)
-		*(va_arg (ap, _PTR *)) = (_PTR) (unsigned _POINTER_INT) res;
-	      else if (flags & CHAR)
-		{
-		  cp = va_arg (ap, char *);
-		  *cp = res;
-		}
-	      else if (flags & SHORT)
-		{
-		  sp = va_arg (ap, short *);
-		  *sp = res;
-		}
-	      else if (flags & LONG)
-		{
-		  lp = va_arg (ap, long *);
-		  *lp = res;
-		}
-#ifndef _NO_LONGLONG
-	      else if (flags & LONGDBL)
-		{
-		  u_long_long resll;
-		  if (ccfn == _strtoul_r)
-		    resll = _strtoull_r (rptr, buf, (char **) NULL, base);
-		  else
-		    resll = _strtoll_r (rptr, buf, (char **) NULL, base);
-		  llp = va_arg (ap, long long*);
-		  *llp = resll;
-		}
-#endif
-	      else
-		{
-		  ip = va_arg (ap, int *);
-		  *ip = res;
-		}
-	      nassigned++;
-	    }
-	  nread += p - buf;
-	  break;
-
-#ifdef FLOATING_POINT
-	case CT_FLOAT:
-	{
-	  /* scan a floating point number as if by strtod */
-	  /* This code used to assume that the number of digits is reasonable.
-	     However, ANSI / ISO C makes no such stipulation; we have to get
-	     exact results even when there is an unreasonable amount of
-	     leading zeroes.  */
-	  long leading_zeroes = 0;
-	  long zeroes, exp_adjust;
-	  char *exp_start = NULL;
-#ifdef hardway
-	  if (width == 0 || width > sizeof (buf) - 1)
-	    width = sizeof (buf) - 1;
-#else
-	  /* size_t is unsigned, hence this optimisation */
-	  if (--width > sizeof (buf) - 2)
-	    width = sizeof (buf) - 2;
-	  width++;
-#endif
-	  flags |= SIGNOK | NDIGITS | DPTOK | EXPOK;
-	  zeroes = 0;
-	  exp_adjust = 0;
-	  for (p = buf; width; )
-	    {
-	      c = *fp->_p;
-	      /*
-	       * This code mimicks the integer conversion
-	       * code, but is much simpler.
-	       */
-	      switch (c)
-		{
-
-		case '0':
-		  if (flags & NDIGITS)
-		    {
-		      flags &= ~SIGNOK;
-		      zeroes++;
-		      goto fskip;
-		    }
-		  /* Fall through.  */
-		case '1':
-		case '2':
-		case '3':
-		case '4':
-		case '5':
-		case '6':
-		case '7':
-		case '8':
-		case '9':
-		  flags &= ~(SIGNOK | NDIGITS);
-		  goto fok;
-
-		case '+':
-		case '-':
-		  if (flags & SIGNOK)
-		    {
-		      flags &= ~SIGNOK;
-		      goto fok;
-		    }
-		  break;
-		case '.':
-		  if (flags & DPTOK)
-		    {
-		      flags &= ~(SIGNOK | DPTOK);
-		      leading_zeroes = zeroes;
-		      goto fok;
-		    }
-		  break;
-		case 'e':
-		case 'E':
-		  /* no exponent without some digits */
-		  if ((flags & (NDIGITS | EXPOK)) == EXPOK
-		      || ((flags & EXPOK) && zeroes))
-		    {
-		      if (! (flags & DPTOK))
-			{
-			  exp_adjust = zeroes - leading_zeroes;
-			  exp_start = p;
-			}
-		      flags =
-			(flags & ~(EXPOK | DPTOK)) |
-			SIGNOK | NDIGITS;
-		      zeroes = 0;
-		      goto fok;
-		    }
-		  break;
-		}
-	      break;
-	    fok:
-	      *p++ = c;
-	    fskip:
-	      width--;
-              ++nread;
-	      if (--fp->_r > 0)
-		fp->_p++;
-	      else
-#ifndef CYGNUS_NEC
-	      if (__srefill (fp))
-#endif
-		break;		/* EOF */
-	    }
-	  if (zeroes)
-	    flags &= ~NDIGITS;
-	  /*
-	   * If no digits, might be missing exponent digits
-	   * (just give back the exponent) or might be missing
-	   * regular digits, but had sign and/or decimal point.
-	   */
-	  if (flags & NDIGITS)
-	    {
-	      if (flags & EXPOK)
-		{
-		  /* no digits at all */
-		  while (p > buf)
-                    {
-		      ungetc (*(u_char *)-- p, fp);
-                      --nread;
-                    }
-		  goto match_failure;
-		}
-	      /* just a bad exponent (e and maybe sign) */
-	      c = *(u_char *)-- p;
-              --nread;
-	      if (c != 'e' && c != 'E')
-		{
-		  _CAST_VOID ungetc (c, fp);	/* sign */
-		  c = *(u_char *)-- p;
-                  --nread;
-		}
-	      _CAST_VOID ungetc (c, fp);
-	    }
-	  if ((flags & SUPPRESS) == 0)
-	    {
-	      double res;
-#ifdef _NO_LONGDBL
-#define QUAD_RES res;
-#else  /* !_NO_LONG_DBL */
-	      long double qres;
-#define QUAD_RES qres;
-#endif /* !_NO_LONG_DBL */
-	      long new_exp = 0;
-
-	      *p = 0;
-	      if ((flags & (DPTOK | EXPOK)) == EXPOK)
-		{
-		  exp_adjust = zeroes - leading_zeroes;
-		  new_exp = -exp_adjust;
-		  exp_start = p;
-		}
-	      else if (exp_adjust)
-                new_exp = _strtol_r (rptr, (exp_start + 1), NULL, 10) - exp_adjust;
-	      if (exp_adjust)
-		{
-
-		  /* If there might not be enough space for the new exponent,
-		     truncate some trailing digits to make room.  */
-		  if (exp_start >= buf + sizeof (buf) - MAX_LONG_LEN)
-		    exp_start = buf + sizeof (buf) - MAX_LONG_LEN - 1;
-                 sprintf (exp_start, "e%ld", new_exp);
-		}
-
-	      /* Current _strtold routine is markedly slower than 
-	         _strtod_r.  Only use it if we have a long double
-	         result.  */
-#ifndef _NO_LONGDBL /* !_NO_LONGDBL */
-	      if (flags & LONGDBL)
-	      	qres = _strtold (buf, NULL);
-	      else
-#endif
-	        res = _strtod_r (rptr, buf, NULL);
-
-	      if (flags & LONG)
-		{
-		  dp = va_arg (ap, double *);
-		  *dp = res;
-		}
-	      else if (flags & LONGDBL)
-		{
-		  ldp = va_arg (ap, _LONG_DOUBLE *);
-		  *ldp = QUAD_RES;
-		}
-	      else
-		{
-		  flp = va_arg (ap, float *);
-		  *flp = res;
-		}
-	      nassigned++;
-	    }
-	  break;
-	}
-#endif /* FLOATING_POINT */
-	}
-    }
-input_failure:
-  return nassigned ? nassigned : -1;
-match_failure:
-  return nassigned;
-}
-
-/*
- * Fill in the given table from the scanset at the given format
- * (just after `[').  Return a pointer to the character past the
- * closing `]'.  The table has a 1 wherever characters should be
- * considered part of the scanset.
- */
-
-/*static*/
-u_char *
-__sccl (tab, fmt)
-     register char *tab;
-     register u_char *fmt;
-{
-  register int c, n, v;
-
-  /* first `clear' the whole table */
-  c = *fmt++;			/* first char hat => negated scanset */
-  if (c == '^')
-    {
-      v = 1;			/* default => accept */
-      c = *fmt++;		/* get new first char */
-    }
-  else
-    v = 0;			/* default => reject */
-  /* should probably use memset here */
-  for (n = 0; n < 256; n++)
-    tab[n] = v;
-  if (c == 0)
-    return fmt - 1;		/* format ended before closing ] */
-
-  /*
-   * Now set the entries corresponding to the actual scanset to the
-   * opposite of the above.
-   *
-   * The first character may be ']' (or '-') without being special; the
-   * last character may be '-'.
-   */
-
-  v = 1 - v;
-  for (;;)
-    {
-      tab[c] = v;		/* take character c */
-    doswitch:
-      n = *fmt++;		/* and examine the next */
-      switch (n)
-	{
-
-	case 0:		/* format ended too soon */
-	  return fmt - 1;
-
-	case '-':
-	  /*
-	   * A scanset of the form [01+-] is defined as `the digit 0, the
-	   * digit 1, the character +, the character -', but the effect of a
-	   * scanset such as [a-zA-Z0-9] is implementation defined.  The V7
-	   * Unix scanf treats `a-z' as `the letters a through z', but treats
-	   * `a-a' as `the letter a, the character -, and the letter a'.
-	   *
-	   * For compatibility, the `-' is not considerd to define a range if
-	   * the character following it is either a close bracket (required by
-	   * ANSI) or is not numerically greater than the character we just
-	   * stored in the table (c).
-	   */
-	  n = *fmt;
-	  if (n == ']' || n < c)
-	    {
-	      c = '-';
-	      break;		/* resume the for(;;) */
-	    }
-	  fmt++;
-	  do
-	    {			/* fill in the range */
-	      tab[++c] = v;
-	    }
-	  while (c < n);
-#if 1			/* XXX another disgusting compatibility hack */
-	  /*
-	   * Alas, the V7 Unix scanf also treats formats such
-	   * as [a-c-e] as `the letters a through e'. This too
-	   * is permitted by the standard....
-	   */
-	  goto doswitch;
-#else
-	  c = *fmt++;
-	  if (c == 0)
-	    return fmt - 1;
-	  if (c == ']')
-	    return fmt;
-#endif
-
-	  break;
-
-
-	case ']':		/* end of scanset */
-	  return fmt;
-
-	default:		/* just another character */
-	  c = n;
-	  break;
-	}
-    }
-  /* NOTREACHED */
-}
diff --git a/newlib/libc/stdio/vprintf.c b/newlib/libc/stdio/vprintf.c
deleted file mode 100644
index 916d51898..000000000
--- a/newlib/libc/stdio/vprintf.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* doc in vfprintf.c */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <stdio.h>
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#include "local.h"
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vprintf, (fmt, ap),
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  _REENT_SMALL_CHECK_INIT(_stdout_r (_REENT));
-  return _vfprintf_r (_REENT, _stdout_r (_REENT), fmt, ap);
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vprintf_r, (ptr, fmt, ap),
-     struct _reent *ptr _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  _REENT_SMALL_CHECK_INIT(_stdout_r (ptr));
-  return _vfprintf_r (ptr, _stdout_r (ptr), fmt, ap);
-}
diff --git a/newlib/libc/stdio/vscanf.c b/newlib/libc/stdio/vscanf.c
deleted file mode 100644
index e494aaf60..000000000
--- a/newlib/libc/stdio/vscanf.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*-
- * Code created by modifying scanf.c which has following copyright.
- *
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <stdio.h>
-#include "local.h"
-
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-/*
- * vscanf
- */
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vscanf, (fmt, ap), 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  _REENT_SMALL_CHECK_INIT(_stdin_r (_REENT));
-  return __svfscanf_r (_REENT, _stdin_r (_REENT), fmt, ap);
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vscanf_r, (ptr, fmt, ap),
-    struct _reent *ptr _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  _REENT_SMALL_CHECK_INIT(_stdin_r (ptr));
-  return __svfscanf_r (ptr, _stdin_r (ptr), fmt, ap);
-}
-
diff --git a/newlib/libc/stdio/vsnprintf.c b/newlib/libc/stdio/vsnprintf.c
deleted file mode 100644
index 0393ead29..000000000
--- a/newlib/libc/stdio/vsnprintf.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/* doc in vfprintf.c */
-
-/* This code created by modifying vsprintf.c so copyright inherited. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <limits.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vsnprintf, (str, size, fmt, ap),
-     char *str _AND
-     size_t size _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = (size > 0 ? size - 1 : 0);
-  ret = _vfprintf_r (_REENT, &f, fmt, ap);
-  if (size > 0)
-    *f._p = 0;
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vsnprintf_r, (ptr, str, size, fmt, ap),
-     struct _reent *ptr _AND
-     char *str _AND
-     size_t size _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = (size > 0 ? size - 1 : 0);
-  ret = _vfprintf_r (ptr, &f, fmt, ap);
-  if (size > 0)
-    *f._p = 0;
-  return ret;
-}
diff --git a/newlib/libc/stdio/vsprintf.c b/newlib/libc/stdio/vsprintf.c
deleted file mode 100644
index 5efd43a82..000000000
--- a/newlib/libc/stdio/vsprintf.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* doc in vfprintf.c */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <limits.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-#ifndef _REENT_ONLY 
-
-int
-_DEFUN (vsprintf, (str, fmt, ap),
-     char *str _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = INT_MAX;
-  f._file = -1;  /* No file. */
-  ret = _vfprintf_r (_REENT, &f, fmt, ap);
-  *f._p = 0;
-  return ret;
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vsprintf_r, (ptr, str, fmt, ap),
-     struct _reent *ptr _AND
-     char *str _AND
-     _CONST char *fmt _AND
-     va_list ap)
-{
-  int ret;
-  FILE f;
-
-  f._flags = __SWR | __SSTR;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._w = INT_MAX;
-  f._file = -1;  /* No file. */
-  ret = _vfprintf_r (ptr, &f, fmt, ap);
-  *f._p = 0;
-  return ret;
-}
-
diff --git a/newlib/libc/stdio/vsscanf.c b/newlib/libc/stdio/vsscanf.c
deleted file mode 100644
index 16f810465..000000000
--- a/newlib/libc/stdio/vsscanf.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Code created by modifying scanf.c which has following copyright.
- *
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <string.h>
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-#include "local.h"
-
-static
-_READ_WRITE_RETURN_TYPE
-eofread1 (cookie, buf, len)
-    _PTR cookie;
-    char *buf;
-    int len;
-{
-  return 0;
-}
-
-/*
- * vsscanf
- */
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (vsscanf, (str, fmt, ap), 
-    _CONST char *str _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  return _vsscanf_r (_REENT, str, fmt, ap);
-}
-
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_vsscanf_r, (ptr, str, fmt, ap),
-    struct _reent *ptr _AND 
-    _CONST char *str _AND 
-    _CONST char *fmt _AND 
-    va_list ap)
-{
-  FILE f;
-
-  f._flags = __SRD;
-  f._bf._base = f._p = (unsigned char *) str;
-  f._bf._size = f._r = strlen (str);
-  f._read = eofread1;
-  f._ub._base = NULL;
-  f._lb._base = NULL;
-  return __svfscanf_r (ptr, &f, fmt, ap);    
-}
-
diff --git a/newlib/libc/stdio/wbuf.c b/newlib/libc/stdio/wbuf.c
deleted file mode 100644
index 110682971..000000000
--- a/newlib/libc/stdio/wbuf.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include "local.h"
-#include "fvwrite.h"
-
-/*
- * Write the given character into the (probably full) buffer for
- * the given file.  Flush the buffer out if it is or becomes full,
- * or if c=='\n' and the file is line buffered.
- */
-
-int
-__swbuf (c, fp)
-     register int c;
-     register FILE *fp;
-{
-  register int n;
-
-  /* Ensure stdio has been initialized.  */
-
-  CHECK_INIT (fp);
-
-  /*
-   * In case we cannot write, or longjmp takes us out early,
-   * make sure _w is 0 (if fully- or un-buffered) or -_bf._size
-   * (if line buffered) so that we will get called again.
-   * If we did not do this, a sufficient number of putc()
-   * calls might wrap _w from negative to positive.
-   */
-
-  fp->_w = fp->_lbfsize;
-  if (cantwrite (fp))
-    return EOF;
-  c = (unsigned char) c;
-
-  /*
-   * If it is completely full, flush it out.  Then, in any case,
-   * stuff c into the buffer.  If this causes the buffer to fill
-   * completely, or if c is '\n' and the file is line buffered,
-   * flush it (perhaps a second time).  The second flush will always
-   * happen on unbuffered streams, where _bf._size==1; fflush()
-   * guarantees that putc() will always call wbuf() by setting _w
-   * to 0, so we need not do anything else.
-   */
-
-  n = fp->_p - fp->_bf._base;
-  if (n >= fp->_bf._size)
-    {
-      if (fflush (fp))
-	return EOF;
-      n = 0;
-    }
-  fp->_w--;
-  *fp->_p++ = c;
-  if (++n == fp->_bf._size || (fp->_flags & __SLBF && c == '\n'))
-    if (fflush (fp))
-      return EOF;
-  return c;
-}
diff --git a/newlib/libc/stdio/wsetup.c b/newlib/libc/stdio/wsetup.c
deleted file mode 100644
index 23b032efe..000000000
--- a/newlib/libc/stdio/wsetup.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* No user fns here. Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "local.h"
-
-/*
- * Various output routines call wsetup to be sure it is safe to write,
- * because either _flags does not include __SWR, or _buf is NULL.
- * _wsetup returns 0 if OK to write, nonzero otherwise.
- */
-
-int
-_DEFUN (__swsetup, (fp),
-	register FILE * fp)
-{
-  /* Make sure stdio is set up.  */
-
-  CHECK_INIT (fp);
-
-  /*
-   * If we are not writing, we had better be reading and writing.
-   */
-
-  if ((fp->_flags & __SWR) == 0)
-    {
-      if ((fp->_flags & __SRW) == 0)
-	return EOF;
-      if (fp->_flags & __SRD)
-	{
-	  /* clobber any ungetc data */
-	  if (HASUB (fp))
-	    FREEUB (fp);
-	  fp->_flags &= ~(__SRD | __SEOF);
-	  fp->_r = 0;
-	  fp->_p = fp->_bf._base;
-	}
-      fp->_flags |= __SWR;
-    }
-
-  /*
-   * Make a buffer if necessary, then set _w.
-   */
-  /* NOT NEEDED FOR CYGNUS SPRINTF ONLY jpg */
-  if (fp->_bf._base == NULL)
-    __smakebuf (fp);
-
-  if (fp->_flags & __SLBF)
-    {
-      /*
-       * It is line buffered, so make _lbfsize be -_bufsize
-       * for the putc() macro.  We will change _lbfsize back
-       * to 0 whenever we turn off __SWR.
-       */
-      fp->_w = 0;
-      fp->_lbfsize = -fp->_bf._size;
-    }
-  else
-    fp->_w = fp->_flags & __SNBF ? 0 : fp->_bf._size;
-
-  return 0;
-}
diff --git a/newlib/libc/stdio64/Makefile.am b/newlib/libc/stdio64/Makefile.am
deleted file mode 100644
index f31614ae3..000000000
--- a/newlib/libc/stdio64/Makefile.am
+++ /dev/null
@@ -1,71 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-# need a dummy object so objectlist.awk.in will build every time
-GENERAL_SOURCES = dummy.c local64.h
-
-## All interfaces are EL/IX level 2
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	fdopen64.$(oext) 	\
-	fgetpos64.$(oext)	\
-	fopen64.$(oext) 	\
-	freopen64.$(oext) 	\
-	fseeko64.$(oext) 	\
-	fsetpos64.$(oext) 	\
-	ftello64.$(oext)	\
-	stdio64.$(oext)		\
-	tmpfile64.$(oext)
-endif
-
-libstdio64_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libstdio64.la
-libstdio64_la_SOURCES = $(GENERAL_SOURCES)
-libstdio64_la_LIBADD = $(LIB_OBJS)
-libstdio64_la_DEPENDENCIES = $(LIB_OBJS)
-LIB_COMPILE = $(LTCOMPILE)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-LIB_COMPILE = $(COMPILE)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-AM_CFLAGS = -I $(srcdir)/../stdio
-
-CHEWOUT_FILES = \
-	fgetpos64.def		\
-	fopen64.def		\
-	freopen64.def		\
-	fseeko64.def		\
-	fsetpos64.def		\
-	ftello64.def		\
-	tmpfile64.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdio64.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-
diff --git a/newlib/libc/stdio64/Makefile.in b/newlib/libc/stdio64/Makefile.in
deleted file mode 100644
index 69e99f914..000000000
--- a/newlib/libc/stdio64/Makefile.in
+++ /dev/null
@@ -1,413 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-# need a dummy object so objectlist.awk.in will build every time
-GENERAL_SOURCES = dummy.c local64.h
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	fdopen64.$(oext) 	\
-@ELIX_LEVEL_1_FALSE@	fgetpos64.$(oext)	\
-@ELIX_LEVEL_1_FALSE@	fopen64.$(oext) 	\
-@ELIX_LEVEL_1_FALSE@	freopen64.$(oext) 	\
-@ELIX_LEVEL_1_FALSE@	fseeko64.$(oext) 	\
-@ELIX_LEVEL_1_FALSE@	fsetpos64.$(oext) 	\
-@ELIX_LEVEL_1_FALSE@	ftello64.$(oext)	\
-@ELIX_LEVEL_1_FALSE@	stdio64.$(oext)		\
-@ELIX_LEVEL_1_FALSE@	tmpfile64.$(oext)
-
-libstdio64_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libstdio64.la
-@USE_LIBTOOL_TRUE@libstdio64_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libstdio64_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libstdio64_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@LIB_COMPILE = @USE_LIBTOOL_TRUE@$(LTCOMPILE)
-@USE_LIBTOOL_FALSE@LIB_COMPILE = @USE_LIBTOOL_FALSE@$(COMPILE)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-AM_CFLAGS = -I $(srcdir)/../stdio
-
-CHEWOUT_FILES = \
-	fgetpos64.def		\
-	fopen64.def		\
-	freopen64.def		\
-	fseeko64.def		\
-	fsetpos64.def		\
-	ftello64.def		\
-	tmpfile64.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  dummy.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libstdio64_la_OBJECTS =  dummy.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libstdio64_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libstdio64_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus stdio64/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libstdio64.la: $(libstdio64_la_OBJECTS) $(libstdio64_la_DEPENDENCIES)
-	$(LINK)  $(libstdio64_la_LDFLAGS) $(libstdio64_la_OBJECTS) $(libstdio64_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = stdio64
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdio64.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/stdio64/dummy.c b/newlib/libc/stdio64/dummy.c
deleted file mode 100644
index 90d0120ed..000000000
--- a/newlib/libc/stdio64/dummy.c
+++ /dev/null
@@ -1 +0,0 @@
-/* empty stub so there's at least one file to put in objectlist.awk.in */
diff --git a/newlib/libc/stdio64/fdopen64.c b/newlib/libc/stdio64/fdopen64.c
deleted file mode 100644
index d0fd0d584..000000000
--- a/newlib/libc/stdio64/fdopen64.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-FUNCTION
-<<fdopen64>>---turn open file into a stream
-
-INDEX
-	fdopen64
-INDEX
-	_fdopen64_r
-
-SYNOPSIS
-	#include <stdio.h>
-	FILE *fdopen64(int <[fd]>, const char *<[mode]>);
-	FILE *_fdopen64_r(void *<[reent]>,
-                     int <[fd]>, const char *<[mode]>);
-
-DESCRIPTION
-<<fdopen64>> produces a file descriptor of type <<FILE *>>, from a
-descriptor for an already-open file (returned, for example, by the
-system subroutine <<open>> rather than by <<fopen>>).
-The <[mode]> argument has the same meanings as in <<fopen>>.
-
-RETURNS
-File pointer or <<NULL>>, as for <<fopen>>.
-*/
-
-#include <sys/types.h>
-#include <sys/fcntl.h>
-
-#include <stdio.h>
-#include <errno.h>
-#include "local64.h"
-#include <_syslist.h>
-#include <sys/lock.h>
-
-extern int __sflags ();
-
-FILE *
-_DEFUN (_fdopen64_r, (ptr, fd, mode),
-	struct _reent *ptr _AND
-	int fd _AND
-	_CONST char *mode)
-{
-  register FILE *fp;
-  int flags, oflags;
-#ifdef HAVE_FCNTL
-  int fdflags, fdmode;
-#endif
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    return 0;
-
-  /* make sure the mode the user wants is a subset of the actual mode */
-#ifdef HAVE_FCNTL
-  if ((fdflags = _fcntl_r (ptr, fd, F_GETFL, 0)) < 0)
-    return 0;
-  fdmode = fdflags & O_ACCMODE;
-  if (fdmode != O_RDWR && (fdmode != (oflags & O_ACCMODE)))
-    {
-      ptr->_errno = EBADF;
-      return 0;
-    }
-#endif
-
-  if ((fp = __sfp (ptr)) == 0)
-    return 0;
-  fp->_flags = flags;
-  /*
-   * If opened for appending, but underlying descriptor
-   * does not have O_APPEND bit set, assert __SAPP so that
-   * __swrite() will lseek to end before each write.
-   */
-  if ((oflags & O_APPEND)
-#ifdef HAVE_FCNTL
-       && !(fdflags & O_APPEND)
-#endif
-      )
-    fp->_flags |= __SAPP;
-  fp->_file = fd;
-  fp->_cookie = (_PTR) fp;
-
-#undef _read
-#undef _write
-#undef _seek
-#undef _close
-
-  fp->_read = __sread;
-  fp->_write = __swrite64;
-  fp->_seek = __sseek;
-  fp->_seek64 = __sseek64;
-  fp->_close = __sclose;
-
-#ifdef __SCLE
-  /* Explicit given mode results in explicit setting mode on fd */
-  if (oflags & O_BINARY)
-    setmode(fp->_file, O_BINARY);
-  else if (oflags & O_TEXT)
-    setmode(fp->_file, O_TEXT);
-  if (__stextmode(fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-#ifndef __SINGLE_THREAD__
-  __lock_init_recursive (*(_LOCK_RECURSIVE_T *)&fp->_lock);
-#endif
-
-  fp->_flags |= __SL64;
-
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (fdopen64, (fd, mode),
-	int fd _AND
-	_CONST char *mode)
-{
-  return _fdopen64_r (_REENT, fd, mode);
-}
-
-#endif
diff --git a/newlib/libc/stdio64/fgetpos64.c b/newlib/libc/stdio64/fgetpos64.c
deleted file mode 100644
index 5f8c1c3ab..000000000
--- a/newlib/libc/stdio64/fgetpos64.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-FUNCTION
-<<fgetpos64>>---record position in a large stream or file
-
-INDEX
-	fgetpos64
-INDEX
-	_fgetpos64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fgetpos64(FILE *<[fp]>, _fpos64_t *<[pos]>);
-	int _fgetpos64_r(struct _reent *<[ptr]>, FILE *<[fp]>, 
-	                 _fpos64_t *<[pos]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fgetpos64(<[fp]>, <[pos]>)
-	FILE *<[fp]>;
-	_fpos64_t *<[pos]>;
-
-	int _fgetpos64_r(<[ptr]>, <[fp]>, <[pos]>)
-	FILE *<[fp]>;
-	_fpos64_t *<[pos]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fgetpos64>> to report on the current position for a file
-identified by <[fp]> that was opened by <<fopen64>>; <<fgetpos>> will write 
-a value representing that position at <<*<[pos]>>>.  Later, you can
-use this value with <<fsetpos64>> to return the file to this
-position.
-
-In the current implementation, <<fgetpos64>> simply uses a character
-count to represent the file position; this is the same number that
-would be returned by <<ftello64>>.
-
-RETURNS
-<<fgetpos64>> returns <<0>> when successful.  If <<fgetpos64>> fails, the
-result is <<1>>.  Failure occurs on streams that do not support
-positioning or streams not opened via <<fopen64>>; the global <<errno>> 
-indicates these conditions with the value <<ESPIPE>>.
-
-PORTABILITY
-<<fgetpos64>> is a glibc extension.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdio.h>
-
-#ifdef __LARGE64_FILES
-
-int
-_DEFUN (_fgetpos64_r, (ptr, fp, pos),
-	struct _reent * ptr _AND
-	FILE * fp _AND
-	_fpos64_t * pos)
-{
-  _flockfile(fp);
-  *pos = (_fpos64_t)_ftello64_r (ptr, fp);
-
-  if (*pos != -1)
-    {
-      _funlockfile(fp);
-      return 0;
-    }
-  _funlockfile(fp);
-  return 1;
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (fgetpos64, (fp, pos),
-	FILE * fp _AND
-	_fpos64_t * pos)
-{
-  return _fgetpos64_r (_REENT, fp, pos);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/fopen64.c b/newlib/libc/stdio64/fopen64.c
deleted file mode 100644
index 3c69820ee..000000000
--- a/newlib/libc/stdio64/fopen64.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fopen64>>---open a large file
-
-INDEX
-	fopen64
-INDEX
-	_fopen64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *fopen64(const char *<[file]>, const char *<[mode]>);
-	FILE *_fopen64_r(void *<[reent]>, 
-                       const char *<[file]>, const char *<[mode]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *fopen64(<[file]>, <[mode]>)
-	char *<[file]>;
-	char *<[mode]>;
-
-	FILE *_fopen64_r(<[reent]>, <[file]>, <[mode]>)
-	char *<[reent]>;
-	char *<[file]>;
-	char *<[mode]>;
-
-DESCRIPTION
-<<fopen64>> is identical to <<fopen>> except it opens a large file that
-is potentially >2GB in size.  See <<fopen>> for further details.
-
-RETURNS
-<<fopen64>> return a file pointer which you can use for other file
-operations, unless the file you requested could not be opened; in that
-situation, the result is <<NULL>>.  If the reason for failure was an
-invalid string at <[mode]>, <<errno>> is set to <<EINVAL>>.
-
-PORTABILITY
-<<fopen64>> is a glibc extension.
-
-Supporting OS subroutines required: <<close>>, <<fstat64>>, <<isatty>>,
-<<lseek64>>, <<open64>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-/* Copied from fopen.c */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <errno.h>
-#include "local64.h"
-#ifdef __CYGWIN__
-#include <fcntl.h>
-#endif
-#include <sys/lock.h>
-
-#ifdef __LARGE64_FILES
-
-FILE *
-_DEFUN (_fopen64_r, (ptr, file, mode),
-	struct _reent *ptr _AND
-	_CONST char *file _AND
-	_CONST char *mode)
-{
-  register FILE *fp;
-  register int f;
-  int flags, oflags;
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    return NULL;
-  if ((fp = __sfp (ptr)) == NULL)
-    return NULL;
-
-  if ((f = _open64_r (ptr, file, oflags, 0666)) < 0)
-    {
-      fp->_flags = 0;		/* release */
-      return NULL;
-    }
-
-  fp->_file = f;
-  fp->_flags = flags;
-  fp->_cookie = (_PTR) fp;
-  fp->_read = __sread;
-  fp->_write = __swrite64;
-  fp->_seek = __sseek;
-  fp->_seek64 = __sseek64;
-  fp->_close = __sclose;
-
-  if (fp->_flags & __SAPP)
-    _fseeko64_r (ptr, fp, 0, SEEK_END);
-
-#ifdef __SCLE
-  if (__stextmode (fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-  fp->_flags |= __SL64;
-
-#ifndef __SINGLE_THREAD__
-  __lock_init_recursive (*(_LOCK_RECURSIVE_T *)&fp->_lock);
-#endif
-
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (fopen64, (file, mode),
-	_CONST char *file _AND
-	_CONST char *mode)
-{
-  return _fopen64_r (_REENT, file, mode);
-}
-
-#endif
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/freopen64.c b/newlib/libc/stdio64/freopen64.c
deleted file mode 100644
index 6e4586cd9..000000000
--- a/newlib/libc/stdio64/freopen64.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<freopen64>>---open a large file using an existing file descriptor
-
-INDEX
-	freopen64
-INDEX
-	_freopen64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *freopen64(const char *<[file]>, const char *<[mode]>,
-		        FILE *<[fp]>);
-	FILE *_freopen64_r(struct _reent *<[ptr]>, const char *<[file]>, 
-		        const char *<[mode]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *freopen64(<[file]>, <[mode]>, <[fp]>)
-	char *<[file]>;
-	char *<[mode]>;
-	FILE *<[fp]>;
-
-	FILE *_freopen64_r(<[ptr]>, <[file]>, <[mode]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	char *<[file]>;
-	char *<[mode]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-Use this variant of <<fopen64>> if you wish to specify a particular file
-descriptor <[fp]> (notably <<stdin>>, <<stdout>>, or <<stderr>>) for
-the file.
-
-If <[fp]> was associated with another file or stream, <<freopen64>>
-closes that other file or stream (but ignores any errors while closing
-it).
-
-<[file]> and <[mode]> are used just as in <<fopen>>.
-
-RETURNS
-If successful, the result is the same as the argument <[fp]>.  If the
-file cannot be opened as specified, the result is <<NULL>>.
-
-PORTABILITY
-<<freopen>> is a glibc extension.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek64>>, <<open64>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <time.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include "local64.h"
-
-/*
- * Re-direct an existing, open (probably) file to some other file.
- */
-
-#ifdef __LARGE64_FILES
-
-FILE *
-_DEFUN (_freopen64_r, (ptr, file, mode, fp),
-	struct _reent *ptr _AND
-	_CONST char *file _AND
-	_CONST char *mode _AND
-	register FILE *fp)
-{
-  register int f;
-  int flags, oflags, e;
-
-  _flockfile(fp);
-
-  CHECK_INIT (fp);
-
-  if ((flags = __sflags (ptr, mode, &oflags)) == 0)
-    {
-      (void) fclose (fp);
-      _funlockfile(fp);
-      return NULL;
-    }
-
-  /*
-   * Remember whether the stream was open to begin with, and
-   * which file descriptor (if any) was associated with it.
-   * If it was attached to a descriptor, defer closing it,
-   * so that, e.g., freopen("/dev/stdin", "r", stdin) works.
-   * This is unnecessary if it was not a Unix file.
-   */
-
-  if (fp->_flags == 0)
-    fp->_flags = __SEOF;	/* hold on to it */
-  else
-    {
-      if (fp->_flags & __SWR)
-	(void) fflush (fp);
-      /* if close is NULL, closing is a no-op, hence pointless */
-      if (fp->_close != NULL)
-	(void) (*fp->_close) (fp->_cookie);
-    }
-
-  /*
-   * Now get a new descriptor to refer to the new file.
-   */
-
-  f = _open64_r (ptr, (char *) file, oflags, 0666);
-  e = ptr->_errno;
-
-  /*
-   * Finish closing fp.  Even if the open succeeded above,
-   * we cannot keep fp->_base: it may be the wrong size.
-   * This loses the effect of any setbuffer calls,
-   * but stdio has always done this before.
-   */
-
-  if (fp->_flags & __SMBF)
-    _free_r (ptr, (char *) fp->_bf._base);
-  fp->_w = 0;
-  fp->_r = 0;
-  fp->_p = NULL;
-  fp->_bf._base = NULL;
-  fp->_bf._size = 0;
-  fp->_lbfsize = 0;
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_ub._size = 0;
-  if (HASLB (fp))
-    FREELB (fp);
-  fp->_lb._size = 0;
-
-  if (f < 0)
-    {				/* did not get it after all */
-      fp->_flags = 0;		/* set it free */
-      ptr->_errno = e;		/* restore in case _close clobbered */
-      _funlockfile(fp);
-      return NULL;
-    }
-
-  fp->_flags = flags;
-  fp->_file = f;
-  fp->_cookie = (_PTR) fp;
-  fp->_read = __sread;
-  fp->_write = __swrite64;
-  fp->_seek = __sseek;
-  fp->_seek64 = __sseek64;
-  fp->_close = __sclose;
-
-#ifdef __SCLE
-  if (__stextmode(fp->_file))
-    fp->_flags |= __SCLE;
-#endif
-
-  fp->_flags |= __SL64;
-
-  _funlockfile(fp);
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN (freopen64, (file, mode, fp),
-	_CONST char *file _AND
-	_CONST char *mode _AND
-	register FILE *fp)
-{
-  return _freopen64_r (_REENT, file, mode, fp);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/fseeko64.c b/newlib/libc/stdio64/fseeko64.c
deleted file mode 100644
index 312883072..000000000
--- a/newlib/libc/stdio64/fseeko64.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<fseeko64>>---set file position for large file
-
-INDEX
-	fseeko64
-INDEX
-	_fseeko64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fseeko64(FILE *<[fp]>, _off64_t <[offset]>, int <[whence]>)
-	int _fseeko64_r (struct _reent *<[ptr]>, FILE *<[fp]>, 
-                         _off64_t <[offset]>, int <[whence]>)
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	int fseeko64(<[fp]>, <[offset]>, <[whence]>)
-	FILE *<[fp]>;
-	_off64_t <[offset]>;
-	int <[whence]>;
-
-	int _fseeko64_r (<[ptr]>, <[fp]>, <[offset]>, <[whence]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	_off64_t <[offset]>;
-	int <[whence]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fseeko64>> to set the position for the file identified by
-<[fp]> that was opened via <<fopen64>>.  The value of <[offset]> determines 
-the new position, in one of three ways selected by the value of <[whence]> 
-(defined as macros in `<<stdio.h>>'):
-
-<<SEEK_SET>>---<[offset]> is the absolute file position (an offset
-from the beginning of the file) desired.  <[offset]> must be positive.
-
-<<SEEK_CUR>>---<[offset]> is relative to the current file position.
-<[offset]> can meaningfully be either positive or negative.
-
-<<SEEK_END>>---<[offset]> is relative to the current end of file.
-<[offset]> can meaningfully be either positive (to increase the size
-of the file) or negative.
-
-See <<ftello64>> to determine the current file position.
-
-RETURNS
-<<fseeko64>> returns <<0>> when successful.  On failure, the
-result is <<EOF>>.  The reason for failure is indicated in <<errno>>:
-either <<ESPIPE>> (the stream identified by <[fp]> doesn't support
-repositioning or wasn't opened via <<fopen64>>) or <<EINVAL>> 
-(invalid file position).
-
-PORTABILITY
-<<fseeko64>> is a glibc extension.
-
-Supporting OS subroutines required: <<close>>, <<fstat64>>, <<isatty>>,
-<<lseek64>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-#include <time.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "local64.h"
-
-#define	POS_ERR	(-(_fpos64_t)1)
-
-#ifdef __LARGE64_FILES
-
-/*
- * Seek the given file to the given offset.
- * `Whence' must be one of the three SEEK_* macros.
- */
-
-_off64_t
-_DEFUN (_fseeko64_r, (ptr, fp, offset, whence),
-     struct _reent *ptr _AND
-     register FILE *fp _AND
-     _off64_t offset _AND
-     int whence)
-{
-  _fpos64_t _EXFUN ((*seekfn), (void *, _fpos64_t, int));
-  _fpos64_t target, curoff;
-  size_t n;
-
-  struct stat64 st;
-  int havepos;
-
-  _flockfile(fp);
-
-  /* Make sure stdio is set up.  */
-
-  CHECK_INIT (fp);
-
-  curoff = fp->_offset;
-
-  /* If we've been doing some writing, and we're in append mode
-     then we don't really know where the filepos is.  */
-
-  if (fp->_flags & __SAPP && fp->_flags & __SWR)
-    {
-      /* So flush the buffer and seek to the end.  */
-      fflush (fp);
-    }
-
-  /* Have to be able to seek.  */
-
-  if ((seekfn = fp->_seek64) == NULL || !(fp->_flags & __SL64))
-    {
-      ptr->_errno = ESPIPE;	/* ??? */
-      _funlockfile(fp);
-      return EOF;
-    }
-
-  /*
-   * Change any SEEK_CUR to SEEK_SET, and check `whence' argument.
-   * After this, whence is either SEEK_SET or SEEK_END.
-   */
-
-  switch (whence)
-    {
-    case SEEK_CUR:
-      /*
-       * In order to seek relative to the current stream offset,
-       * we have to first find the current stream offset a la
-       * ftell (see ftell for details).
-       */
-      fflush(fp);   /* may adjust seek offset on append stream */
-      if (fp->_flags & __SOFF)
-	curoff = fp->_offset;
-      else
-	{
-	  curoff = (*seekfn) (fp->_cookie, (_fpos64_t) 0, SEEK_CUR);
-	  if (curoff == -1L)
-	    {
-	      _funlockfile(fp);
-	      return EOF;
-	    }
-	}
-      if (fp->_flags & __SRD)
-	{
-	  curoff -= fp->_r;
-	  if (HASUB (fp))
-	    curoff -= fp->_ur;
-	}
-      else if (fp->_flags & __SWR && fp->_p != NULL)
-	curoff += fp->_p - fp->_bf._base;
-
-      offset += curoff;
-      whence = SEEK_SET;
-      havepos = 1;
-      break;
-
-    case SEEK_SET:
-    case SEEK_END:
-      havepos = 0;
-      break;
-
-    default:
-      ptr->_errno = EINVAL;
-      _funlockfile(fp);
-      return (EOF);
-    }
-
-  /*
-   * Can only optimise if:
-   *	reading (and not reading-and-writing);
-   *	not unbuffered; and
-   *	this is a `regular' Unix file (and hence seekfn==__sseek).
-   * We must check __NBF first, because it is possible to have __NBF
-   * and __SOPT both set.
-   */
-
-  if (fp->_bf._base == NULL)
-    __smakebuf (fp);
-  if (fp->_flags & (__SWR | __SRW | __SNBF | __SNPT))
-    goto dumb;
-  if ((fp->_flags & __SOPT) == 0)
-    {
-      if (seekfn != __sseek64
-	  || fp->_file < 0
-	  || _fstat64_r (ptr, fp->_file, &st)
-	  || (st.st_mode & S_IFMT) != S_IFREG)
-	{
-	  fp->_flags |= __SNPT;
-	  goto dumb;
-	}
-#ifdef	HAVE_BLKSIZE
-      fp->_blksize = st.st_blksize;
-#else
-      fp->_blksize = 1024;
-#endif
-      fp->_flags |= __SOPT;
-    }
-
-  /*
-   * We are reading; we can try to optimise.
-   * Figure out where we are going and where we are now.
-   */
-
-  if (whence == SEEK_SET)
-    target = offset;
-  else
-    {
-      if (_fstat64_r (ptr, fp->_file, &st))
-	goto dumb;
-      target = st.st_size + offset;
-    }
-
-  if (!havepos)
-    {
-      if (fp->_flags & __SOFF)
-	curoff = fp->_offset;
-      else
-	{
-	  curoff = (*seekfn) (fp->_cookie, (_fpos64_t)0, SEEK_CUR);
-	  if (curoff == POS_ERR)
-	    goto dumb;
-	}
-      curoff -= fp->_r;
-      if (HASUB (fp))
-	curoff -= fp->_ur;
-    }
-
-  /*
-   * Compute the number of bytes in the input buffer (pretending
-   * that any ungetc() input has been discarded).  Adjust current
-   * offset backwards by this count so that it represents the
-   * file offset for the first byte in the current input buffer.
-   */
-
-  if (HASUB (fp))
-    {
-      curoff += fp->_r;       /* kill off ungetc */
-      n = fp->_up - fp->_bf._base;
-      curoff -= n;
-      n += fp->_ur;
-    }
-  else
-    {
-      n = fp->_p - fp->_bf._base;
-      curoff -= n;
-      n += fp->_r;
-    }
-
-  /*
-   * If the target offset is within the current buffer,
-   * simply adjust the pointers, clear EOF, undo ungetc(),
-   * and return.  (If the buffer was modified, we have to
-   * skip this; see fgetline.c.)
-   */
-
-  if ((fp->_flags & __SMOD) == 0 &&
-      target >= curoff && target < curoff + n)
-    {
-      register int o = target - curoff;
-
-      fp->_p = fp->_bf._base + o;
-      fp->_r = n - o;
-      if (HASUB (fp))
-	FREEUB (fp);
-      fp->_flags &= ~__SEOF;
-      _funlockfile(fp);
-      return 0;
-    }
-
-  /*
-   * The place we want to get to is not within the current buffer,
-   * but we can still be kind to the kernel copyout mechanism.
-   * By aligning the file offset to a block boundary, we can let
-   * the kernel use the VM hardware to map pages instead of
-   * copying bytes laboriously.  Using a block boundary also
-   * ensures that we only read one block, rather than two.
-   */
-
-  curoff = target & ~((_fpos64_t)(fp->_blksize - 1));
-  if ((*seekfn) (fp->_cookie, curoff, SEEK_SET) == POS_ERR)
-    goto dumb;
-  fp->_r = 0;
-  fp->_p = fp->_bf._base;
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_flags &= ~__SEOF;
-  n = target - curoff;
-  if (n)
-    {
-      if (__srefill (fp) || fp->_r < n)
-	goto dumb;
-      fp->_p += n;
-      fp->_r -= n;
-    }
-  _funlockfile(fp);
-  return 0;
-
-  /*
-   * We get here if we cannot optimise the seek ... just
-   * do it.  Allow the seek function to change fp->_bf._base.
-   */
-
-dumb:
-  if (fflush (fp) || (*seekfn) (fp->_cookie, offset, whence) == POS_ERR)
-    {
-      _funlockfile(fp);
-      return EOF;
-    }
-  /* success: clear EOF indicator and discard ungetc() data */
-  if (HASUB (fp))
-    FREEUB (fp);
-  fp->_p = fp->_bf._base;
-  fp->_r = 0;
-  /* fp->_w = 0; *//* unnecessary (I think...) */
-  fp->_flags &= ~__SEOF;
-  _funlockfile(fp);
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-_off64_t
-_DEFUN (fseeko64, (fp, offset, whence),
-     register FILE *fp _AND
-     _off64_t offset _AND
-     int whence)
-{
-  return _fseeko64_r (_REENT, fp, offset, whence);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/fsetpos64.c b/newlib/libc/stdio64/fsetpos64.c
deleted file mode 100644
index 046990d7a..000000000
--- a/newlib/libc/stdio64/fsetpos64.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-FUNCTION
-<<fsetpos64>>---restore position of a large stream or file
-
-INDEX
-	fsetpos64
-INDEX
-	_fsetpos64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	int fsetpos64(FILE *<[fp]>, const _fpos64_t *<[pos]>);
-	int _fsetpos64_r(struct _reent *<[ptr]>, FILE *<[fp]>, 
-	                 const _fpos64_t *<[pos]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	int fsetpos64(<[fp]>, <[pos]>)
-	FILE *<[fp]>;
-	_fpos64_t *<[pos]>;
-
-	int _fsetpos64_r(<[ptr]>, <[fp]>, <[pos]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-	_fpos64_t *<[pos]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-You can use <<fsetpos64>> to return the large file identified by <[fp]> to a 
-previous position <<*<[pos]>>> (after first recording it with <<fgetpos64>>).
-
-See <<fseeko64>> for a similar facility.
-
-RETURNS
-<<fgetpos64>> returns <<0>> when successful.  If <<fgetpos64>> fails, the
-result is <<1>>.  The reason for failure is indicated in <<errno>>:
-either <<ESPIPE>> (the stream identified by <[fp]> doesn't support
-64-bit repositioning) or <<EINVAL>> (invalid file position).
-
-PORTABILITY
-<<fsetpos64>> is a glibc extension.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek64>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stdio.h>
-
-#ifdef __LARGE64_FILES
-
-int
-_DEFUN (_fsetpos64_r, (ptr, iop, pos),
-	struct _reent *ptr _AND
-	FILE * iop _AND
-	_CONST _fpos64_t * pos)
-{
-  int x = _fseeko64_r (ptr, iop, (_off64_t)(*pos), SEEK_SET);
-
-  if (x != 0)
-    return 1;
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (fsetpos64, (iop, pos),
-	FILE * iop _AND
-	_CONST _fpos64_t * pos)
-{
-  return _fsetpos64_r (_REENT, iop, pos);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/ftello64.c b/newlib/libc/stdio64/ftello64.c
deleted file mode 100644
index aaf0f023e..000000000
--- a/newlib/libc/stdio64/ftello64.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
-FUNCTION
-<<ftello64>>---return position in a stream or file
-
-INDEX
-	ftello64
-INDEX
-	_ftello64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	_off64_t ftello64(FILE *<[fp]>);
-	_off64_t _ftello64_r(struct _reent *<[ptr]>, FILE *<[fp]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	_off64_t ftello64(<[fp]>)
-	FILE *<[fp]>;
-
-	_off64_t _ftello64_r(<[ptr]>, <[fp]>)
-	struct _reent *<[ptr]>;
-	FILE *<[fp]>;
-
-DESCRIPTION
-Objects of type <<FILE>> can have a ``position'' that records how much
-of the file your program has already read.  Many of the <<stdio>> functions
-depend on this position, and many change it as a side effect.
-
-The result of <<ftello64>> is the current position for a large file
-identified by <[fp]>.  If you record this result, you can later
-use it with <<fseeko64>> to return the file to this
-position.  The difference between <<ftello>> and <<ftello64>> is that
-<<ftello>> returns <<off_t>> and <<ftello64>> is designed to work
-for large files (>2GB) and returns <<_off64_t>>.
-
-In the current implementation, <<ftello64>> simply uses a character
-count to represent the file position; this is the same number that
-would be recorded by <<fgetpos64>>.
-
-The function exists only if the __LARGE64_FILES flag is defined.
-An error occurs if the <[fp]> was not opened via <<fopen64>>.
-
-RETURNS
-<<ftello64>> returns the file position, if possible.  If it cannot do
-this, it returns <<-1>>.  Failure occurs on streams that do not support
-positioning or not opened via <<fopen64>>; the global <<errno>> indicates 
-this condition with the value <<ESPIPE>>.
-
-PORTABILITY
-<<ftello64>> is a glibc extension.
-
-No supporting OS subroutines are required.
-*/
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "%W% (Berkeley) %G%";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * ftello64: return current offset.
- */
-
-#include <stdio.h>
-#include <errno.h>
-
-#include "local64.h"
-
-#ifdef __LARGE64_FILES
-
-_off64_t
-_DEFUN (_ftello64_r, (ptr, fp),
-	struct _reent *ptr _AND
-	register FILE * fp)
-{
-  _fpos64_t pos;
-
-  _flockfile(fp);
-
-  /* Ensure stdio is set up.  */
-
-  CHECK_INIT (fp);
-
-  if (fp->_seek64 == NULL)
-    {
-      ptr->_errno = ESPIPE;
-      _funlockfile(fp);
-      return -1L;
-    }
-
-  /* Find offset of underlying I/O object, then
-     adjust for buffered bytes.  */
-  fflush(fp);           /* may adjust seek offset on append stream */
-  if (fp->_flags & __SOFF)
-    pos = fp->_offset;
-  else
-    {
-      pos = (*fp->_seek64) (fp->_cookie, (_fpos64_t) 0, SEEK_CUR);
-      if (pos == -1L)
-        {
-          _funlockfile(fp);
-          return pos;
-        }
-    }
-  if (fp->_flags & __SRD)
-    {
-      /*
-       * Reading.  Any unread characters (including
-       * those from ungetc) cause the position to be
-       * smaller than that in the underlying object.
-       */
-      pos -= fp->_r;
-      if (HASUB (fp))
-	pos -= fp->_ur;
-    }
-  else if (fp->_flags & __SWR && fp->_p != NULL)
-    {
-      /*
-       * Writing.  Any buffered characters cause the
-       * position to be greater than that in the
-       * underlying object.
-       */
-      pos += fp->_p - fp->_bf._base;
-    }
-
-  _funlockfile(fp);
-  return pos;
-}
-
-#ifndef _REENT_ONLY
-
-_off64_t
-_DEFUN (ftello64, (fp),
-	register FILE * fp)
-{
-  return _ftello64_r (_REENT, fp);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
diff --git a/newlib/libc/stdio64/local64.h b/newlib/libc/stdio64/local64.h
deleted file mode 100644
index b86c95d03..000000000
--- a/newlib/libc/stdio64/local64.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Information local to this implementation of stdio64,
- * in particular, macros and private variables.
- */
-
-#include "local.h"
-
-#ifdef __LARGE64_FILES
-extern _fpos64_t _EXFUN(__sseek64,(void *, _fpos64_t, int));
-extern _fpos64_t _EXFUN(__sseek64_r,(struct _reent *, void *, _fpos64_t, int));
-extern _fpos64_t _EXFUN(__sseek64_error,(void *, _fpos64_t, int));
-extern _READ_WRITE_RETURN_TYPE _EXFUN(__swrite64,(void *, char const *, int));
-extern _READ_WRITE_RETURN_TYPE _EXFUN(__swrite64_r,(struct _reent *, void *, 
-                                      char const *, int));
-#endif
-
diff --git a/newlib/libc/stdio64/stdio64.c b/newlib/libc/stdio64/stdio64.c
deleted file mode 100644
index 35967ad99..000000000
--- a/newlib/libc/stdio64/stdio64.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* No user fns here.  Pesch 15apr92. */
-
-/*
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <sys/unistd.h>
-#include <errno.h>
-#include "local.h"
-
-#ifdef __LARGE64_FILES
-_fpos64_t
-__sseek64_r (ptr, cookie, offset, whence)
-     struct _reent *ptr;
-     _PTR cookie;
-     _fpos64_t offset;
-     int whence;
-{
-  register FILE *fp = (FILE *) cookie;
-  register _off64_t ret;
-
-  ret = _lseek64_r (ptr, fp->_file, (_off64_t) offset, whence);
-  if (ret == (_fpos64_t)-1L)
-    fp->_flags &= ~__SOFF;
-  else
-    {
-      fp->_flags |= __SOFF;
-      fp->_offset = ret;
-    }
-  return ret;
-}
-
-_READ_WRITE_RETURN_TYPE
-__swrite64_r (ptr, cookie, buf, n)
-     struct _reent *ptr;
-     _PTR cookie;
-     char _CONST *buf;
-     int n;
-{
-  register FILE *fp = (FILE *) cookie;
-  int w;
-#ifdef __SCLE
-  int oldmode=0;
-#endif
-
-  if (fp->_flags & __SAPP)
-    (void) _lseek64_r (ptr, fp->_file, (_off64_t)0, SEEK_END);
-  fp->_flags &= ~__SOFF;	/* in case O_APPEND mode is set */
-
-#ifdef __SCLE
-  if (fp->_flags & __SCLE)
-    oldmode = setmode(fp->_file, O_BINARY);
-#endif
-
-  w = _write_r (ptr, fp->_file, buf, n);
-
-#ifdef __SCLE
-  if (oldmode)
-    setmode(fp->_file, oldmode);
-#endif
-
-  return w;
-}
-
-#ifndef _REENT_ONLY
-_fpos64_t
-__sseek64 (cookie, offset, whence)
-     _PTR cookie;
-     _fpos64_t offset;
-     int whence;
-{
-  return __sseek64_r (_REENT, cookie, offset, whence);
-}
-
-_READ_WRITE_RETURN_TYPE
-__swrite64 (cookie, buf, n)
-     _PTR cookie;
-     char _CONST *buf;
-     int n;
-{
-  return __swrite64_r (_REENT, cookie, buf, n);
-}
-
-#endif /* !_REENT_ONLY */
-
-#endif /* __LARGE64_FILES */
-
diff --git a/newlib/libc/stdio64/stdio64.tex b/newlib/libc/stdio64/stdio64.tex
deleted file mode 100644
index 55818c354..000000000
--- a/newlib/libc/stdio64/stdio64.tex
+++ /dev/null
@@ -1,42 +0,0 @@
-@node Stdio64
-@chapter Large File Input and Output (@file{stdio.h}) 
-
-This chapter comprises additional functions to manage large files which
-are potentially larger than 2GB.
-
-The underlying facilities for input and output depend on the host
-system, but these functions provide a uniform interface.
-
-The corresponding declarations are in @file{stdio.h}.
-
-@menu  
-* fopen64::     Open a large file
-* freopen64::   Open a large file using an existing file descriptor
-* fsetpos64::   Restore position of a large stream or file
-* fgetpos64::   Get position of a large stream or file
-* ftello64::    Return position in a large stream or file
-* fseeko64::    Set large file position
-* tmpfile64::   Create a temporary large file
-@end menu 
-
-@page
-@include stdio64/fopen64.def
-
-@page
-@include stdio64/freopen64.def
-
-@page 
-@include stdio64/ftello64.def 
-
-@page
-@include stdio64/fseeko64.def
-
-@page
-@include stdio64/fgetpos64.def
-
-@page
-@include stdio64/fsetpos64.def
-
-@page
-@include stdio64/tmpfile64.def
-
diff --git a/newlib/libc/stdio64/tmpfile64.c b/newlib/libc/stdio64/tmpfile64.c
deleted file mode 100644
index 98689631f..000000000
--- a/newlib/libc/stdio64/tmpfile64.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-FUNCTION
-<<tmpfile64>>---create a large temporary file
-
-INDEX
-	tmpfile64
-INDEX
-	_tmpfile64_r
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-	FILE *tmpfile64(void);
-
-	FILE *_tmpfile64_r(void *<[reent]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-	FILE *tmpfile64();
-
-	FILE *_tmpfile64_r(<[reent]>)
-	char *<[reent]>;
-
-DESCRIPTION
-Create a large temporary file (a file which will be deleted automatically),
-using a name generated by <<tmpnam>>.  The temporary file is opened with
-the mode <<"wb+">>, permitting you to read and write anywhere in it
-as a binary file (without any data transformations the host system may
-perform for text files).  The file may be larger than 2GB.
-
-The alternate function <<_tmpfile64_r>> is a reentrant version.  The
-argument <[reent]> is a pointer to a reentrancy structure.
-
-Both <<tmpfile64>> and <<_tmpfile64_r>> are only defined if __LARGE64_FILES
-is defined.
-
-RETURNS
-<<tmpfile64>> normally returns a pointer to the temporary file.  If no
-temporary file could be created, the result is NULL, and <<errno>>
-records the reason for failure.
-
-PORTABILITY
-<<tmpfile64>> is a glibc extension.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<getpid>>,
-<<isatty>>, <<lseek64>>, <<open64>>, <<read>>, <<sbrk>>, <<write>>.
-
-<<tmpfile64>> also requires the global pointer <<environ>>.
-*/
-
-#include <stdio.h>
-#include <errno.h>
-
-#ifdef __LARGE64_FILES
-
-FILE *
-_DEFUN (_tmpfile64_r, (ptr),
-	struct _reent *ptr)
-{
-  FILE *fp;
-  int e;
-  char *f;
-  char buf[L_tmpnam];
-
-  if ((f = _tmpnam_r (ptr, buf)) == NULL)
-    return NULL;
-  fp = _fopen64_r (ptr, (const char *)f, "wb+");
-  e = ptr->_errno;
-  _CAST_VOID _remove_r (ptr, f);
-  ptr->_errno = e;
-  return fp;
-}
-
-#ifndef _REENT_ONLY
-
-FILE *
-_DEFUN_VOID (tmpfile64)
-{
-  return _tmpfile64_r (_REENT);
-}
-
-#endif
-
-#endif /* __LARGE64_FILES */
-
diff --git a/newlib/libc/stdlib/Makefile.am b/newlib/libc/stdlib/Makefile.am
deleted file mode 100644
index f6ac17cc9..000000000
--- a/newlib/libc/stdlib/Makefile.am
+++ /dev/null
@@ -1,256 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	__adjust.c 	\
-	__exp10.c 	\
-	__ten_mu.c 	\
-	_Exit.c		\
-	abort.c  	\
-	abs.c 		\
-	assert.c  	\
-	atexit.c	\
-	atof.c 		\
-	atoff.c		\
-	atoi.c  	\
-	atol.c		\
-	calloc.c	\
-	div.c  		\
-	dtoa.c 		\
-	dtoastub.c 	\
-	environ.c	\
-	envlock.c	\
-	eprintf.c	\
-	exit.c 		\
-	getenv.c  	\
-	getenv_r.c	\
-	labs.c 		\
-	ldiv.c  	\
-	ldtoa.c		\
-	malloc.c  	\
-	mblen.c		\
-	mblen_r.c	\
-	mbstowcs.c	\
-	mbstowcs_r.c	\
-	mbtowc.c	\
-	mbtowc_r.c	\
-	mlock.c		\
-	mprec.c		\
-	mstats.c	\
-	rand.c		\
-	rand_r.c	\
-	realloc.c	\
-	strtod.c	\
-	strtol.c	\
-	strtoul.c	\
-	wcstombs.c	\
-	wcstombs_r.c	\
-	wctomb.c	\
-	wctomb_r.c
-
-EXTENDED_SOURCES = \
-	drand48.c	\
-	ecvtbuf.c 	\
-	efgcvt.c 	\
-	erand48.c	\
-	jrand48.c	\
-	lcong48.c	\
-	lrand48.c	\
-	mrand48.c	\
-	msize.c		\
-	mtrim.c		\
-	nrand48.c	\
-	rand48.c	\
-	seed48.c	\
-	srand48.c	\
-	strtoll.c	\
-	strtoll_r.c	\
-	strtoull.c	\
-	strtoull_r.c	\
-	atoll.c		\
-	llabs.c		\
-	lldiv.c
-
-ELIX_2_OBJS = \
-	a64l.$(oext)		\
-	btowc.$(oext)		\
-	getopt.$(oext)		\
-	getsubopt.$(oext)	\
-	l64a.$(oext)		\
-	malign.$(oext)		\
-	malignr.$(oext)		\
-	malloptr.$(oext)	\
-	mbrlen.$(oext)		\
-	mbrtowc.$(oext)		\
-	mbsinit.$(oext)		\
-	mbsrtowcs.$(oext)	\
-	on_exit.$(oext)		\
-	pvallocr.$(oext)	\
-	valloc.$(oext)		\
-	vallocr.$(oext)		\
-	wcrtomb.$(oext)		\
-	wcsrtombs.$(oext)	\
-	wctob.$(oext)
-
-ELIX_3_OBJS = \
-	putenv.$(oext)		\
-	putenv_r.$(oext)	\
-	setenv.$(oext)		\
-	setenv_r.$(oext)
-
-ELIX_4_OBJS = \
-	system.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS = $(ELIX_2_OBJS)
-else
-if ELIX_LEVEL_3
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS)
-else
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-endif
-endif
-endif
-
-# Because of how libtool moves objects around, mallocr must be built last.
-LIBADD_OBJS = freer.$(oext) reallocr.$(oext) callocr.$(oext) cfreer.$(oext) \
-	mallinfor.$(oext) msizer.$(oext) mallocr.$(oext)
-
-libstdlib_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libstdlib.la
-libstdlib_la_SOURCES = $(GENERAL_SOURCES) $(EXTENDED_SOURCES)
-libstdlib_la_LIBADD = $(LIB_OBJS) $(LIBADD_OBJS)
-libstdlib_la_DEPENDENCIES = $(LIB_OBJS) $(LIBADD_OBJS)
-LIB_COMPILE = $(LTCOMPILE)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES) $(EXTENDED_SOURCES)
-lib_a_LIBADD = $(LIBADD_OBJS) $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIBADD_OBJS) $(LIB_OBJS)
-LIB_COMPILE = $(COMPILE)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-MALLOC_COMPILE = $(LIB_COMPILE) -DINTERNAL_NEWLIB
-
-mallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/mallocr.c -o $@
-
-freer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/mallocr.c -o $@
-
-reallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/mallocr.c -o $@
-
-callocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/mallocr.c -o $@
-
-cfreer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CFREE -c $(srcdir)/mallocr.c -o $@
-
-malignr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MEMALIGN -c $(srcdir)/mallocr.c -o $@
-
-vallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_VALLOC -c $(srcdir)/mallocr.c -o $@
-
-pvallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_PVALLOC -c $(srcdir)/mallocr.c -o $@
-
-mallinfor.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLINFO -c $(srcdir)/mallocr.c -o $@
-
-mallstatsr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_STATS -c $(srcdir)/mallocr.c -o $@
-
-msizer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_USABLE_SIZE -c $(srcdir)/mallocr.c -o $@
-
-malloptr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOPT -c $(srcdir)/mallocr.c -o $@
-
-CHEWOUT_FILES= \
-	_Exit.def	\
-	a64l.def	\
-	abort.def	\
-	abs.def		\
-	assert.def	\
-	atexit.def	\
-	atof.def 	\
-	atoi.def 	\
-	atoll.def 	\
-	calloc.def	\
-	div.def		\
-	ecvtbuf.def	\
-	efgcvt.def 	\
-	envlock.def	\
-	exit.def	\
-	getenv.def	\
-	labs.def	\
-	ldiv.def	\
-	llabs.def	\
-	lldiv.def	\
-	malloc.def	\
-	mallocr.def	\
-	mblen.def	\
-	mbstowcs.def	\
-	mbtowc.def	\
-	mlock.def	\
-	mstats.def	\
-	on_exit.def	\
-	rand.def	\
-	rand48.def	\
-	strtod.def 	\
-	strtol.def 	\
-	strtoll.def 	\
-	strtoul.def 	\
-	strtoull.def 	\
-	system.def	\
-	wcstombs.def	\
-	wctomb.def	
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdlib.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-
-dtoa.$(oext): dtoa.c mprec.h
-ldtoa.$(oext): ldtoa.c mprec.h
-ecvtbuf.$(oext): ecvtbuf.c mprec.h
-mbtowc_r.$(oext): mbtowc_r.c mbctype.h
-	$(LIB_COMPILE) -c -fshort-enums $(srcdir)/mbtowc_r.c -o $@
-
-mprec.$(oext): mprec.c mprec.h
-strtod.$(oext): strtod.c mprec.h
-wctomb_r.$(oext): wctomb_r.c mbctype.h
-drand48.$(oext): drand48.c rand48.h
-erand48.$(oext): erand48.c rand48.h
-jrand48.$(oext): jrand48.c rand48.h
-lcong48.$(oext): lcong48.c rand48.h
-lrand48.$(oext): lrand48.c rand48.h
-mrand48.$(oext): mrand48.c rand48.h
-nrand48.$(oext): nrand48.c rand48.h
-rand48.$(oext): rand48.c rand48.h
-seed48.$(oext): seed48.c rand48.h
-srand48.$(oext): srand48.c rand48.h
diff --git a/newlib/libc/stdlib/Makefile.in b/newlib/libc/stdlib/Makefile.in
deleted file mode 100644
index 4d0fdf842..000000000
--- a/newlib/libc/stdlib/Makefile.in
+++ /dev/null
@@ -1,638 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	__adjust.c 	\
-	__exp10.c 	\
-	__ten_mu.c 	\
-	_Exit.c		\
-	abort.c  	\
-	abs.c 		\
-	assert.c  	\
-	atexit.c	\
-	atof.c 		\
-	atoff.c		\
-	atoi.c  	\
-	atol.c		\
-	calloc.c	\
-	div.c  		\
-	dtoa.c 		\
-	dtoastub.c 	\
-	environ.c	\
-	envlock.c	\
-	eprintf.c	\
-	exit.c 		\
-	getenv.c  	\
-	getenv_r.c	\
-	labs.c 		\
-	ldiv.c  	\
-	ldtoa.c		\
-	malloc.c  	\
-	mblen.c		\
-	mblen_r.c	\
-	mbstowcs.c	\
-	mbstowcs_r.c	\
-	mbtowc.c	\
-	mbtowc_r.c	\
-	mlock.c		\
-	mprec.c		\
-	mstats.c	\
-	rand.c		\
-	rand_r.c	\
-	realloc.c	\
-	strtod.c	\
-	strtol.c	\
-	strtoul.c	\
-	wcstombs.c	\
-	wcstombs_r.c	\
-	wctomb.c	\
-	wctomb_r.c
-
-
-EXTENDED_SOURCES = \
-	drand48.c	\
-	ecvtbuf.c 	\
-	efgcvt.c 	\
-	erand48.c	\
-	jrand48.c	\
-	lcong48.c	\
-	lrand48.c	\
-	mrand48.c	\
-	msize.c		\
-	mtrim.c		\
-	nrand48.c	\
-	rand48.c	\
-	seed48.c	\
-	srand48.c	\
-	strtoll.c	\
-	strtoll_r.c	\
-	strtoull.c	\
-	strtoull_r.c	\
-	atoll.c		\
-	llabs.c		\
-	lldiv.c
-
-
-ELIX_2_OBJS = \
-	a64l.$(oext)		\
-	btowc.$(oext)		\
-	getopt.$(oext)		\
-	getsubopt.$(oext)	\
-	l64a.$(oext)		\
-	malign.$(oext)		\
-	malignr.$(oext)		\
-	malloptr.$(oext)	\
-	mbrlen.$(oext)		\
-	mbrtowc.$(oext)		\
-	mbsinit.$(oext)		\
-	mbsrtowcs.$(oext)	\
-	on_exit.$(oext)		\
-	pvallocr.$(oext)	\
-	valloc.$(oext)		\
-	vallocr.$(oext)		\
-	wcrtomb.$(oext)		\
-	wcsrtombs.$(oext)	\
-	wctob.$(oext)
-
-
-ELIX_3_OBJS = \
-	putenv.$(oext)		\
-	putenv_r.$(oext)	\
-	setenv.$(oext)		\
-	setenv_r.$(oext)
-
-
-ELIX_4_OBJS = \
-	system.$(oext)
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@$(ELIX_2_OBJS) $(ELIX_3_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@$(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-
-# Because of how libtool moves objects around, mallocr must be built last.
-LIBADD_OBJS = freer.$(oext) reallocr.$(oext) callocr.$(oext) cfreer.$(oext) \
-	mallinfor.$(oext) msizer.$(oext) mallocr.$(oext)
-
-
-libstdlib_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libstdlib.la
-@USE_LIBTOOL_TRUE@libstdlib_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES) $(EXTENDED_SOURCES)
-@USE_LIBTOOL_TRUE@libstdlib_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS) $(LIBADD_OBJS)
-@USE_LIBTOOL_TRUE@libstdlib_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS) $(LIBADD_OBJS)
-@USE_LIBTOOL_TRUE@LIB_COMPILE = @USE_LIBTOOL_TRUE@$(LTCOMPILE)
-@USE_LIBTOOL_FALSE@LIB_COMPILE = @USE_LIBTOOL_FALSE@$(COMPILE)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES) $(EXTENDED_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(LIB_OBJS)
-
-MALLOC_COMPILE = $(LIB_COMPILE) -DINTERNAL_NEWLIB
-
-CHEWOUT_FILES = \
-	_Exit.def	\
-	a64l.def	\
-	abort.def	\
-	abs.def		\
-	assert.def	\
-	atexit.def	\
-	atof.def 	\
-	atoi.def 	\
-	atoll.def 	\
-	calloc.def	\
-	div.def		\
-	ecvtbuf.def	\
-	efgcvt.def 	\
-	envlock.def	\
-	exit.def	\
-	getenv.def	\
-	labs.def	\
-	ldiv.def	\
-	llabs.def	\
-	lldiv.def	\
-	malloc.def	\
-	mallocr.def	\
-	mblen.def	\
-	mbstowcs.def	\
-	mbtowc.def	\
-	mlock.def	\
-	mstats.def	\
-	on_exit.def	\
-	rand.def	\
-	rand48.def	\
-	strtod.def 	\
-	strtol.def 	\
-	strtoll.def 	\
-	strtoul.def 	\
-	strtoull.def 	\
-	system.def	\
-	wcstombs.def	\
-	wctomb.def	
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  __adjust.$(OBJEXT) __exp10.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@__ten_mu.$(OBJEXT) _Exit.$(OBJEXT) abort.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@abs.$(OBJEXT) assert.$(OBJEXT) atexit.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@atof.$(OBJEXT) atoff.$(OBJEXT) atoi.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@atol.$(OBJEXT) calloc.$(OBJEXT) div.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dtoa.$(OBJEXT) dtoastub.$(OBJEXT) environ.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@envlock.$(OBJEXT) eprintf.$(OBJEXT) exit.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getenv.$(OBJEXT) getenv_r.$(OBJEXT) labs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ldiv.$(OBJEXT) ldtoa.$(OBJEXT) malloc.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mblen.$(OBJEXT) mblen_r.$(OBJEXT) mbstowcs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mbstowcs_r.$(OBJEXT) mbtowc.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mbtowc_r.$(OBJEXT) mlock.$(OBJEXT) mprec.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mstats.$(OBJEXT) rand.$(OBJEXT) rand_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@realloc.$(OBJEXT) strtod.$(OBJEXT) strtol.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strtoul.$(OBJEXT) wcstombs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcstombs_r.$(OBJEXT) wctomb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wctomb_r.$(OBJEXT) drand48.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ecvtbuf.$(OBJEXT) efgcvt.$(OBJEXT) erand48.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@jrand48.$(OBJEXT) lcong48.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@lrand48.$(OBJEXT) mrand48.$(OBJEXT) msize.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mtrim.$(OBJEXT) nrand48.$(OBJEXT) rand48.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@seed48.$(OBJEXT) srand48.$(OBJEXT) strtoll.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strtoll_r.$(OBJEXT) strtoull.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strtoull_r.$(OBJEXT) atoll.$(OBJEXT) llabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@lldiv.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libstdlib_la_OBJECTS =  __adjust.lo __exp10.lo \
-@USE_LIBTOOL_TRUE@__ten_mu.lo _Exit.lo abort.lo abs.lo assert.lo \
-@USE_LIBTOOL_TRUE@atexit.lo atof.lo atoff.lo atoi.lo atol.lo calloc.lo \
-@USE_LIBTOOL_TRUE@div.lo dtoa.lo dtoastub.lo environ.lo envlock.lo \
-@USE_LIBTOOL_TRUE@eprintf.lo exit.lo getenv.lo getenv_r.lo labs.lo \
-@USE_LIBTOOL_TRUE@ldiv.lo ldtoa.lo malloc.lo mblen.lo mblen_r.lo \
-@USE_LIBTOOL_TRUE@mbstowcs.lo mbstowcs_r.lo mbtowc.lo mbtowc_r.lo \
-@USE_LIBTOOL_TRUE@mlock.lo mprec.lo mstats.lo rand.lo rand_r.lo \
-@USE_LIBTOOL_TRUE@realloc.lo strtod.lo strtol.lo strtoul.lo wcstombs.lo \
-@USE_LIBTOOL_TRUE@wcstombs_r.lo wctomb.lo wctomb_r.lo drand48.lo \
-@USE_LIBTOOL_TRUE@ecvtbuf.lo efgcvt.lo erand48.lo jrand48.lo lcong48.lo \
-@USE_LIBTOOL_TRUE@lrand48.lo mrand48.lo msize.lo mtrim.lo nrand48.lo \
-@USE_LIBTOOL_TRUE@rand48.lo seed48.lo srand48.lo strtoll.lo \
-@USE_LIBTOOL_TRUE@strtoll_r.lo strtoull.lo strtoull_r.lo atoll.lo \
-@USE_LIBTOOL_TRUE@llabs.lo lldiv.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libstdlib_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libstdlib_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus stdlib/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libstdlib.la: $(libstdlib_la_OBJECTS) $(libstdlib_la_DEPENDENCIES)
-	$(LINK)  $(libstdlib_la_LDFLAGS) $(libstdlib_la_OBJECTS) $(libstdlib_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = stdlib
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-mallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC -c $(srcdir)/mallocr.c -o $@
-
-freer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_FREE -c $(srcdir)/mallocr.c -o $@
-
-reallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_REALLOC -c $(srcdir)/mallocr.c -o $@
-
-callocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CALLOC -c $(srcdir)/mallocr.c -o $@
-
-cfreer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_CFREE -c $(srcdir)/mallocr.c -o $@
-
-malignr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MEMALIGN -c $(srcdir)/mallocr.c -o $@
-
-vallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_VALLOC -c $(srcdir)/mallocr.c -o $@
-
-pvallocr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_PVALLOC -c $(srcdir)/mallocr.c -o $@
-
-mallinfor.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLINFO -c $(srcdir)/mallocr.c -o $@
-
-mallstatsr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_STATS -c $(srcdir)/mallocr.c -o $@
-
-msizer.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOC_USABLE_SIZE -c $(srcdir)/mallocr.c -o $@
-
-malloptr.$(oext): mallocr.c
-	$(MALLOC_COMPILE) -DDEFINE_MALLOPT -c $(srcdir)/mallocr.c -o $@
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/stdlib.tex >> $(TARGETDOC)
-
-dtoa.$(oext): dtoa.c mprec.h
-ldtoa.$(oext): ldtoa.c mprec.h
-ecvtbuf.$(oext): ecvtbuf.c mprec.h
-mbtowc_r.$(oext): mbtowc_r.c mbctype.h
-	$(LIB_COMPILE) -c -fshort-enums $(srcdir)/mbtowc_r.c -o $@
-
-mprec.$(oext): mprec.c mprec.h
-strtod.$(oext): strtod.c mprec.h
-wctomb_r.$(oext): wctomb_r.c mbctype.h
-drand48.$(oext): drand48.c rand48.h
-erand48.$(oext): erand48.c rand48.h
-jrand48.$(oext): jrand48.c rand48.h
-lcong48.$(oext): lcong48.c rand48.h
-lrand48.$(oext): lrand48.c rand48.h
-mrand48.$(oext): mrand48.c rand48.h
-nrand48.$(oext): nrand48.c rand48.h
-rand48.$(oext): rand48.c rand48.h
-seed48.$(oext): seed48.c rand48.h
-srand48.$(oext): srand48.c rand48.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/stdlib/_Exit.c b/newlib/libc/stdlib/_Exit.c
deleted file mode 100644
index 3f189a21f..000000000
--- a/newlib/libc/stdlib/_Exit.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-FUNCTION
-<<_Exit>>---end program execution with no cleanup processing
-
-INDEX
-	_Exit
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void _Exit(int <[code]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	void _Exit(<[code]>)
-	int <[code]>;
-
-DESCRIPTION
-Use <<_Exit>> to return control from a program to the host operating
-environment.  Use the argument <[code]> to pass an exit status to the
-operating environment: two particular values, <<EXIT_SUCCESS>> and
-<<EXIT_FAILURE>>, are defined in `<<stdlib.h>>' to indicate success or
-failure in a portable fashion.
-
-<<_Exit>> differs from <<exit>> in that it does not run any
-application-defined cleanup functions registered with <<atexit>> and
-it does not clean up files and streams.  It is identical to <<_exit>>.
-
-RETURNS
-<<_Exit>> does not return to its caller.
-
-PORTABILITY
-<<_Exit>> is defined by the C99 standard.
-
-Supporting OS subroutines required: <<_exit>>.
-*/
-
-#include <stdlib.h>
-#include <unistd.h>	/* for _exit() declaration */
-#include <reent.h>
-
-void 
-_DEFUN (_Exit, (code),
-	int code)
-{
-  _exit (code);
-}
diff --git a/newlib/libc/stdlib/__adjust.c b/newlib/libc/stdlib/__adjust.c
deleted file mode 100644
index d5c70758b..000000000
--- a/newlib/libc/stdlib/__adjust.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * return (*acc) scaled by 10**dexp.
- */
-
-#include <_ansi.h>
-#include <reent.h>
-#include "std.h"
-
-#define abs(x) (((x) < 0) ? -(x) : (x))
-
-double
-_DEFUN (__adjust, (ptr, acc, dexp, sign),
-	struct _reent *ptr _AND
-	double *acc _AND
-	int dexp _AND
-	int sign)
-     /* *acc	the 64 bit accumulator */
-     /* dexp	decimal exponent       */
-     /* sign	sign flag   	       */
-{
-  double r;
-
-  if (dexp > MAXE)
-    {
-      ptr->_errno = ERANGE;
-      return (sign) ? -HUGE_VAL : HUGE_VAL;
-    }
-  else if (dexp < MINE)
-    {
-      ptr->_errno = ERANGE;
-      return 0.0;
-    }
-
-  r = *acc;
-  if (sign)
-    r = -r;
-  if (dexp == 0)
-    return r;
-
-  if (dexp < 0)
-    return r / __exp10 (abs (dexp));
-  else
-    return r * __exp10 (dexp);
-}
diff --git a/newlib/libc/stdlib/__exp10.c b/newlib/libc/stdlib/__exp10.c
deleted file mode 100644
index 967362347..000000000
--- a/newlib/libc/stdlib/__exp10.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * compute 10**x by successive squaring.
- */
-
-#include <_ansi.h>
-
-double
-_DEFUN (__exp10, (x),
-	unsigned x)
-{
-  static _CONST double powtab[] =
-  {1.0,
-   10.0,
-   100.0,
-   1000.0,
-   10000.0};
-
-  if (x < (sizeof (powtab) / sizeof (double)))
-      return powtab[x];
-  else if (x & 1)
-    {
-      return 10.0 * __exp10 (x - 1);
-    }
-  else
-    {
-      double n = __exp10 (x / 2);
-      return n * n;
-    }
-}
diff --git a/newlib/libc/stdlib/__ten_mu.c b/newlib/libc/stdlib/__ten_mu.c
deleted file mode 100644
index 439c226e1..000000000
--- a/newlib/libc/stdlib/__ten_mu.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * [atw] multiply 64 bit accumulator by 10 and add digit.
- * The KA/CA way to do this should be to use
- * a 64-bit integer internally and use "adjust" to
- * convert it to float at the end of processing.
- */
-
-#include <_ansi.h>
-
-int
-_DEFUN (__ten_mul, (acc, digit),
-	double *acc _AND
-	int digit)
-{
-  /*
-   * [atw] Crude, but effective (at least on a KB)...
-   */
-
-  *acc *= 10;
-  *acc += digit;
-
-  return 0;			/* no overflow */
-}
diff --git a/newlib/libc/stdlib/a64l.c b/newlib/libc/stdlib/a64l.c
deleted file mode 100644
index 9a56a9141..000000000
--- a/newlib/libc/stdlib/a64l.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
-FUNCTION
-<<a64l>>,<<l64a>>---convert between radix-64 ascii string and long
-
-INDEX
-        a64l
-INDEX
-	l64a
-
-ANSI_SYNOPSIS
-        #include <stdlib.h>
-        long a64l(const char *<[input]>);
-        char *l64a(long <[input]>);
-
-TRAD_SYNOPSIS
-        #include <stdlib.h>
-        long a64l(<[input]>)
-        const char *<[input]>;
-
-        char *l64a(<[input]>)
-        long <[input]>;
-
-DESCRIPTION
-Conversion is performed between long and radix-64 characters.  The <<l64a>> routine
-transforms up to 32-bits of input value starting from least significant bits to
-the most significant bits.  The input value is split up into a maximum of 5
-groups of 6-bits and possibly one group of 2 bits (bits 31 and 30).
-
-Each group of 6 bits forms a value from 0-63 which is translated into a character
-as follows:
-
-      0 = '.'
-      1 = '/'
-      2-11 = '0' to '9'
-      12-37 = 'A' to 'Z'
-      38-63 = 'a' to 'z'
-
-When remaining bits are zero or all bits have been translated, a nul terminator
-is appended to the string.  An input value of 0 results in the empty string.
-
-The <<a64l>> performs the reverse translation.  Each character is used to generate
-a 6-bit value for up to 30 bits and then a 2-bit value to complete a 32-bit result.
-The nul terminator means that the remaining digits are 0.  An empty input string or 
-NULL string results in 0L.  An invalid string results in undefined behavior.
-If the size of a long is > 32 bits, the result is sign-extended.
- 
-RETURNS
-<<l64a>> returns a nul-terminated string of 0 to 6 characters.
-<<a64l>> returns the 32-bit translated value from the input character string.
-
-PORTABILITY
-<<l64a>> and <<a64l>> are non-ANSI and are defined by the Single Unix Specification.
-
-Supporting OS subroutines required: None.
-*/
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <limits.h>
-
-long
-_DEFUN (a64l, (input),
-	const char *input)
-{
-  char *ptr;
-  char ch;
-  int i, digit;
-  unsigned long result = 0;
-
-  if (input == NULL)
-    return 0;
-
-  ptr = input;
-
-  /* it easiest to go from most significant digit to least so find end of input or up
-     to 6 characters worth */
-  for (i = 0; i < 6; ++i)
-    {
-      if (*ptr)
-	++ptr;
-    }
-
-  while (ptr > input)
-    {
-      ch = *(--ptr);
-
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-      if (ch >= 'a')
-	digit = (ch - 'a') + 38;
-      else if (ch >= 'A')
-	digit = (ch - 'A') + 12;
-      else if (ch >= '0')
-	digit = (ch - '0') + 2;
-      else if (ch == '/')
-	digit = 1;
-      else
-	digit = 0;
-#else /* !defined(PREFER_SIZE_OVER_SPEED) && !defined(__OPTIMIZE_SIZE__) */
-      switch (ch)
-	{
-	case '/':
-	  digit = 1;
-	  break;
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  digit = (ch - '0') + 2;
-	  break;
-	case 'A':
-	case 'B':
-	case 'C':
-	case 'D':
-	case 'E':
-	case 'F':
-	case 'G':
-	case 'H':
-	case 'I':
-	case 'J':
-	case 'K':
-	case 'L':
-	case 'M':
-	case 'N':
-	case 'O':
-	case 'P':
-	case 'Q':
-	case 'R':
-	case 'S':
-	case 'T':
-	case 'U':
-	case 'V':
-	case 'W':
-	case 'X':
-	case 'Y':
-	case 'Z':
-	  digit = (ch - 'A') + 12;
-	  break;
-	case 'a':
-	case 'b':
-	case 'c':
-	case 'd':
-	case 'e':
-	case 'f':
-	case 'g':
-	case 'h':
-	case 'i':
-	case 'j':
-	case 'k':
-	case 'l':
-	case 'm':
-	case 'n':
-	case 'o':
-	case 'p':
-	case 'q':
-	case 'r':
-	case 's':
-	case 't':
-	case 'u':
-	case 'v':
-	case 'w':
-	case 'x':
-	case 'y':
-	case 'z':
-	  digit = (ch - 'A') + 38;
-	  break;
-	default:
-	  digit = 0;
-	  break;
-	}
-#endif /* !defined(PREFER_SIZE_OVER_SPEED) && !defined(__OPTIMIZE_SIZE__) */ 
-      
-      result = (result << 6) + digit;
-    }
-
-#if LONG_MAX > 2147483647
-  /* for implementations where long is > 32 bits, the result must be sign-extended */
-  if (result & 0x80000000)
-      return (((long)-1 >> 32) << 32) + result;
-#endif
-
-  return result;
-}
-
-
-
-
diff --git a/newlib/libc/stdlib/abort.c b/newlib/libc/stdlib/abort.c
deleted file mode 100644
index 93f7c2f42..000000000
--- a/newlib/libc/stdlib/abort.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* NetWare can not use this implementation of abort.  It provides its
-   own version of abort in clib.nlm.  If we can not use clib.nlm, then
-   we must write abort in sys/netware.  */
-
-#ifdef ABORT_PROVIDED
-
-int _dummy_abort = 1;
-
-#else
-
-/*
-FUNCTION
-<<abort>>---abnormal termination of a program
-
-INDEX
-	abort
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void abort(void);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	void abort();
-
-DESCRIPTION
-Use <<abort>> to signal that your program has detected a condition it
-cannot deal with.  Normally, <<abort>> ends your program's execution.
-
-Before terminating your program, <<abort>> raises the exception <<SIGABRT>>
-(using `<<raise(SIGABRT)>>').  If you have used <<signal>> to register
-an exception handler for this condition, that handler has the
-opportunity to retain control, thereby avoiding program termination.
-
-In this implementation, <<abort>> does not perform any stream- or
-file-related cleanup (the host environment may do so; if not, you can
-arrange for your program to do its own cleanup with a <<SIGABRT>>
-exception handler).
-
-RETURNS
-<<abort>> does not return to its caller.
-
-PORTABILITY
-ANSI C requires <<abort>>.
-
-Supporting OS subroutines required: <<_exit>> and optionally, <<write>>.
-*/
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <signal.h>
-
-_VOID
-_DEFUN_VOID (abort)
-{
-#ifdef ABORT_MESSAGE
-  write (2, "Abort called\n", sizeof ("Abort called\n")-1);
-#endif
-
-  while (1)
-    {
-      raise (SIGABRT);
-      _exit (1);
-    }
-}
-
-#endif
diff --git a/newlib/libc/stdlib/abs.c b/newlib/libc/stdlib/abs.c
deleted file mode 100644
index 0308b5729..000000000
--- a/newlib/libc/stdlib/abs.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-FUNCTION
-<<abs>>---integer absolute value (magnitude)
-
-INDEX
-	abs
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int abs(int <[i]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int abs(<[i]>)
-	int <[i]>;
-
-DESCRIPTION
-<<abs>> returns
-@tex
-$|x|$,
-@end tex
-the absolute value of <[i]> (also called the magnitude
-of <[i]>).  That is, if <[i]> is negative, the result is the opposite
-of <[i]>, but if <[i]> is nonnegative the result is <[i]>.
-
-The similar function <<labs>> uses and returns <<long>> rather than <<int>> values.
-
-RETURNS
-The result is a nonnegative integer.
-
-PORTABILITY
-<<abs>> is ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-#include <stdlib.h>
-
-int
-_DEFUN (abs, (i), int i)
-{
-  return (i < 0) ? -i : i;
-}
diff --git a/newlib/libc/stdlib/assert.c b/newlib/libc/stdlib/assert.c
deleted file mode 100644
index 5b08bbaf4..000000000
--- a/newlib/libc/stdlib/assert.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-FUNCTION
-<<assert>>---Macro for Debugging Diagnostics
-
-INDEX
-	assert
-
-ANSI_SYNOPSIS
-	#include <assert.h>
-	void assert(int <[expression]>);
-
-TRAD_SYNOPSIS
-	#include <assert.h>
-	assert(<[expression]>)
-	int <[expression]>;
-
-DESCRIPTION
-	Use this macro to embed debuggging diagnostic statements in
-	your programs.  The argument <[expression]> should be an
-	expression which evaluates to true (nonzero) when your program
-	is working as you intended.
-
-	When <[expression]> evaluates to false (zero), <<assert>>
-	calls <<abort>>, after first printing a message showing what
-	failed and where:
-
-. Assertion failed: <[expression]>, file <[filename]>, line <[lineno]>
-
-	The macro is defined to permit you to turn off all uses of
-	<<assert>> at compile time by defining <<NDEBUG>> as a
-	preprocessor variable.   If you do this, the <<assert>> macro
-	expands to
-
-. (void(0))
-
-RETURNS
-	<<assert>> does not return a value.
-
-PORTABILITY
-	The <<assert>> macro is required by ANSI, as is the behavior
-	when <<NDEBUG>> is defined.
-
-Supporting OS subroutines required (only if enabled): <<close>>, <<fstat>>,
-<<getpid>>, <<isatty>>, <<kill>>, <<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <assert.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-void
-_DEFUN (__assert, (file, line, failedexpr),
-	const char *file _AND
-	int line _AND
-	const char *failedexpr)
-{
-  (void)fiprintf(stderr,
-	"assertion \"%s\" failed: file \"%s\", line %d\n",
-	failedexpr, file, line);
-  abort();
-  /* NOTREACHED */
-}
diff --git a/newlib/libc/stdlib/atexit.c b/newlib/libc/stdlib/atexit.c
deleted file mode 100644
index 97424da81..000000000
--- a/newlib/libc/stdlib/atexit.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * %sccs.include.redist.c%
- */
-
-/*
-FUNCTION
-<<atexit>>---request execution of functions at program exit
-
-INDEX
-	atexit
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int atexit (void (*<[function]>)(void));
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int atexit ((<[function]>)
-	  void (*<[function]>)();
-
-DESCRIPTION
-You can use <<atexit>> to enroll functions in a list of functions that
-will be called when your program terminates normally.  The argument is
-a pointer to a user-defined function (which must not require arguments and
-must not return a result).
-
-The functions are kept in a LIFO stack; that is, the last function
-enrolled by <<atexit>> will be the first to execute when your program
-exits.
-
-There is no built-in limit to the number of functions you can enroll
-in this list; however, after every group of 32 functions is enrolled,
-<<atexit>> will call <<malloc>> to get space for the next part of the
-list.   The initial list of 32 functions is statically allocated, so
-you can always count on at least that many slots available.
-
-RETURNS
-<<atexit>> returns <<0>> if it succeeds in enrolling your function,
-<<-1>> if it fails (possible only if no space was available for
-<<malloc>> to extend the list of functions).
-
-PORTABILITY
-<<atexit>> is required by the ANSI standard, which also specifies that
-implementations must support enrolling at least 32 functions.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Register a function to be performed at exit.
- */
-
-int
-_DEFUN (atexit,
-	(fn),
-	_VOID _EXFUN ((*fn), (_VOID)))
-{
-  register struct _atexit *p;
-
-  /* _REENT_SMALL atexit() doesn't allow more than the required 32 entries.  */
-#ifndef _REENT_SMALL
-  if ((p = _GLOBAL_REENT->_atexit) == NULL)
-    _GLOBAL_REENT->_atexit = p = &_GLOBAL_REENT->_atexit0;
-  if (p->_ind >= _ATEXIT_SIZE)
-    {
-      if ((p = (struct _atexit *) malloc (sizeof *p)) == NULL)
-        return -1;
-      p->_ind = 0;
-      p->_on_exit_args._fntypes = 0;
-      p->_next = _GLOBAL_REENT->_atexit;
-      _GLOBAL_REENT->_atexit = p;
-    }
-#else
-  p = &_GLOBAL_REENT->_atexit;
-  if (p->_ind >= _ATEXIT_SIZE)
-    return -1;
-#endif
-  p->_fns[p->_ind++] = fn;
-  return 0;
-}
diff --git a/newlib/libc/stdlib/atexit.h b/newlib/libc/stdlib/atexit.h
deleted file mode 100644
index 44a928126..000000000
--- a/newlib/libc/stdlib/atexit.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *	%G% (UofMD) %D%
- */
-
-#define	ATEXIT_SIZE 32	/* must be at least 32 to guarantee ANSI conformance */
-
-struct atexit {
-	struct	atexit *next;		/* next in list */
-	int	ind;			/* next index in this table */
-	void	(*fns[ATEXIT_SIZE])();	/* the table itself */
-};
-
-struct atexit *__atexit;	/* points to head of LIFO stack */
diff --git a/newlib/libc/stdlib/atof.c b/newlib/libc/stdlib/atof.c
deleted file mode 100644
index 8497f6807..000000000
--- a/newlib/libc/stdlib/atof.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-FUNCTION
-   <<atof>>, <<atoff>>---string to double or float
-
-INDEX
-	atof
-INDEX
-	atoff
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        double atof(const char *<[s]>);
-        float atoff(const char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-        double atof(<[s]>)
-        char *<[s]>;
-
-        float atoff(<[s]>)
-        char *<[s]>;
-
-DESCRIPTION
-<<atof>> converts the initial portion of a string to a <<double>>.
-<<atoff>> converts the initial portion of a string to a <<float>>.
-
-The functions parse the character string <[s]>,
-locating a substring which can be converted to a floating-point
-value. The substring must match the format:
-. [+|-]<[digits]>[.][<[digits]>][(e|E)[+|-]<[digits]>]
-The substring converted is the longest initial
-fragment of <[s]> that has the expected format, beginning with
-the first non-whitespace character.  The substring
-is empty if <<str>> is empty, consists entirely
-of whitespace, or if the first non-whitespace character is
-something other than <<+>>, <<->>, <<.>>, or a digit.
-
-<<atof(<[s]>)>> is implemented as <<strtod(<[s]>, NULL)>>.
-<<atoff(<[s]>)>> is implemented as <<strtof(<[s]>, NULL)>>.
-
-RETURNS
-<<atof>> returns the converted substring value, if any, as a
-<<double>>; or <<0.0>>,  if no conversion could be performed.
-If the correct value is out of the range of representable values, plus
-or minus <<HUGE_VAL>> is returned, and <<ERANGE>> is stored in
-<<errno>>.
-If the correct value would cause underflow, <<0.0>> is returned
-and <<ERANGE>> is stored in <<errno>>.
-
-<<atoff>> obeys the same rules as <<atof>>, except that it
-returns a <<float>>.
-
-PORTABILITY
-<<atof>> is ANSI C. <<atof>>, <<atoi>>, and <<atol>> are subsumed by <<strod>>
-and <<strol>>, but are used extensively in existing code. These functions are
-less reliable, but may be faster if the argument is verified to be in a valid
-range.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-double
-_DEFUN (atof, (s),
-	_CONST char *s)
-{
-  return strtod (s, NULL);
-}
diff --git a/newlib/libc/stdlib/atoff.c b/newlib/libc/stdlib/atoff.c
deleted file mode 100644
index c97b78fb1..000000000
--- a/newlib/libc/stdlib/atoff.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <stdlib.h>
-#include <_ansi.h>
-
-float
-_DEFUN (atoff, (s),
-	_CONST char *s)
-{
-  return strtof (s, NULL);
-}
diff --git a/newlib/libc/stdlib/atoi.c b/newlib/libc/stdlib/atoi.c
deleted file mode 100644
index 6156eda4d..000000000
--- a/newlib/libc/stdlib/atoi.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-FUNCTION
-   <<atoi>>, <<atol>>---string to integer
-
-INDEX
-	atoi
-INDEX
-	atol
-INDEX
-	_atoi_r
-INDEX
-	_atol_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        int atoi(const char *<[s]>);
-	long atol(const char *<[s]>);
-        int _atoi_r(struct _reent *<[ptr]>, const char *<[s]>);
-        long _atol_r(struct _reent *<[ptr]>, const char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-       int atoi(<[s]>)
-       char *<[s]>;
-
-       long atol(<[s]>)
-       char *<[s]>;
-
-       int _atoi_r(<[ptr]>, <[s]>)
-       struct _reent *<[ptr]>;
-       char *<[s]>;
-
-       long _atol_r(<[ptr]>, <[s]>)
-       struct _reent *<[ptr]>;
-       char *<[s]>;
-
-
-DESCRIPTION
-   <<atoi>> converts the initial portion of a string to an <<int>>.
-   <<atol>> converts the initial portion of a string to a <<long>>.
-
-   <<atoi(s)>> is implemented as <<(int)strtol(s, NULL, 10).>>
-   <<atol(s)>> is implemented as <<strtol(s, NULL, 10).>>
-
-   <<_atoi_r>> and <<_atol_r>> are reentrant versions of <<atoi>> and
-   <<atol>> respectively, passing the reentrancy struct pointer.
-
-RETURNS
-   The functions return the converted value, if any. If no conversion was
-   made, <<0>> is returned.
-
-PORTABILITY
-<<atoi>>, <<atol>> are ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-/*
- * Andy Wilson, 2-Oct-89.
- */
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-#ifndef _REENT_ONLY
-int
-_DEFUN (atoi, (s),
-	_CONST char *s)
-{
-  return (int) strtol (s, NULL, 10);
-}
-#endif /* !_REENT_ONLY */
-
-int
-_DEFUN (_atoi_r, (s),
-	struct _reent *ptr _AND
-	_CONST char *s)
-{
-  return (int) _strtol_r (ptr, s, NULL, 10);
-}
-
diff --git a/newlib/libc/stdlib/atol.c b/newlib/libc/stdlib/atol.c
deleted file mode 100644
index 8d0e5cd0b..000000000
--- a/newlib/libc/stdlib/atol.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Andy Wilson, 2-Oct-89.
- */
-
-#include <stdlib.h>
-#include <_ansi.h>
-
-#ifndef _REENT_ONLY
-long
-_DEFUN (atol, (s), _CONST char *s)
-{
-  return strtol (s, NULL, 10);
-}
-#endif /* !_REENT_ONLY */
-
-long
-_DEFUN (_atol_r, (ptr, s), struct _reent *ptr _AND _CONST char *s)
-{
-  return _strtol_r (ptr, s, NULL, 10);
-}
-
diff --git a/newlib/libc/stdlib/atoll.c b/newlib/libc/stdlib/atoll.c
deleted file mode 100644
index a6abd9595..000000000
--- a/newlib/libc/stdlib/atoll.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-FUNCTION
-<<atoll>>---convert a string to a long long integer
-
-INDEX
-        atoll
-INDEX
-        _atoll_r
-
-ANSI_SYNOPSIS
-        #include <stdlib.h>
-        long long atoll(const char *<[str]>);
-        long long _atoll_r(struct _reent *<[ptr]>, const char *<[str]>);
-
-TRAD_SYNOPSIS
-        #include <stdlib.h>
-        long long atoll(<[str]>)
-        const char *<[str]>;
-
-        long long _atoll_r(<[ptr]>, <[str]>)
-	struct _reent *<[ptr]>;
-        const char *<[str]>;
-
-DESCRIPTION
-The function <<atoll>> converts the initial portion of the string 
-pointed to by <<*<[str]>>> to a type <<long long>>.  A call to
-atoll(str) in this implementation is equivalent to 
-strtoll(str, (char **)NULL, 10) including behavior on error.
-
-The alternate function <<_atoll_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-The converted value.
-
-PORTABILITY
-<<atoll>> is ISO 9899 (C99) and POSIX 1003.1-2001 compatable.
-
-No supporting OS subroutines are required.
-*/
-
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <stdlib.h>
-#include <stddef.h>
-
-#ifndef _REENT_ONLY
-long long
-_DEFUN(atoll, (str),
-       _CONST char *str)
-{
-	return strtoll(str, (char **)NULL, 10);
-}
-#endif /* !_REENT_ONLY */
-
-long long
-_DEFUN(_atoll_r, (ptr, str),
-       struct _reent *ptr _AND
-       _CONST char *str)
-{
-	return _strtoll_r(ptr, str, (char **)NULL, 10);
-}
diff --git a/newlib/libc/stdlib/btowc.c b/newlib/libc/stdlib/btowc.c
deleted file mode 100644
index a1ea920ef..000000000
--- a/newlib/libc/stdlib/btowc.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-
-wint_t
-btowc (int c)
-{
-  mbstate_t mbs;
-  int retval = 0;
-  wchar_t pwc;
-  unsigned char b;
-
-  b = (unsigned char)c;
-
-  /* Put mbs in initial state. */
-  memset (&mbs, '\0', sizeof (mbs));
-
-  _REENT_CHECK_MISC(_REENT);
-
-  retval = _mbtowc_r (_REENT, &pwc, &b, 1, &mbs);
-
-  if (c == EOF || retval != 1)
-    return WEOF;
-  else
-    return (wint_t)pwc;
-}
diff --git a/newlib/libc/stdlib/calloc.c b/newlib/libc/stdlib/calloc.c
deleted file mode 100644
index af9a4adc1..000000000
--- a/newlib/libc/stdlib/calloc.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifdef MALLOC_PROVIDED
-int _dummy_calloc = 1;
-#else
-/*
-FUNCTION
-<<calloc>>---allocate space for arrays
-
-INDEX
-	calloc
-
-INDEX
-	_calloc_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void *calloc(size_t <[n]>, size_t <[s]>);
-	void *calloc_r(void *<[reent]>, size_t <n>, <size_t> <[s]>);
-	
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *calloc(<[n]>, <[s]>)
-	size_t <[n]>, <[s]>;
-
-	char *_calloc_r(<[reent]>, <[n]>, <[s]>)
-	char *<[reent]>;
-	size_t <[n]>;
-	size_t <[s]>;
-
-
-
-DESCRIPTION
-Use <<calloc>> to request a block of memory sufficient to hold an
-array of <[n]> elements, each of which has size <[s]>.
-
-The memory allocated by <<calloc>> comes out of the same memory pool
-used by <<malloc>>, but the memory block is initialized to all zero
-bytes.  (To avoid the overhead of initializing the space, use
-<<malloc>> instead.)
-
-The alternate function <<_calloc_r>> is reentrant.
-The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-If successful, a pointer to the newly allocated space.
-
-If unsuccessful, <<NULL>>.
-
-PORTABILITY
-<<calloc>> is ANSI.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <string.h>
-#include <stdlib.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (calloc, (n, size),
-	size_t n _AND
-	size_t size)
-{
-  return _calloc_r (_REENT, n, size);
-}
-
-#endif
-#endif /* MALLOC_PROVIDED */
diff --git a/newlib/libc/stdlib/div.c b/newlib/libc/stdlib/div.c
deleted file mode 100644
index 816c3fb3c..000000000
--- a/newlib/libc/stdlib/div.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
-FUNCTION
-<<div>>---divide two integers
-
-INDEX
-	div
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	div_t div(int <[n]>, int <[d]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	div_t div(<[n]>, <[d]>)
-	int <[n]>, <[d]>;
-
-DESCRIPTION
-Divide
-@tex
-$n/d$,
-@end tex
-@ifnottex
-<[n]>/<[d]>,
-@end ifnottex
-returning quotient and remainder as two integers in a structure <<div_t>>.
-
-RETURNS
-The result is represented with the structure
-
-. typedef struct
-. {
-.  int quot;
-.  int rem;
-. } div_t;
-
-where the <<quot>> field represents the quotient, and <<rem>> the
-remainder.  For nonzero <[d]>, if `<<<[r]> = div(<[n]>,<[d]>);>>' then
-<[n]> equals `<<<[r]>.rem + <[d]>*<[r]>.quot>>'.
-
-To divide <<long>> rather than <<int>> values, use the similar
-function <<ldiv>>.
-
-PORTABILITY
-<<div>> is ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Chris Torek.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <stdlib.h>		/* div_t */
-
-div_t
-_DEFUN (div, (num, denom),
-	int num _AND
-	int denom)
-{
-	div_t r;
-
-	r.quot = num / denom;
-	r.rem = num % denom;
-	/*
-	 * The ANSI standard says that |r.quot| <= |n/d|, where
-	 * n/d is to be computed in infinite precision.  In other
-	 * words, we should always truncate the quotient towards
-	 * 0, never -infinity or +infinity.
-	 *
-	 * Machine division and remainer may work either way when
-	 * one or both of n or d is negative.  If only one is
-	 * negative and r.quot has been truncated towards -inf,
-	 * r.rem will have the same sign as denom and the opposite
-	 * sign of num; if both are negative and r.quot has been
-	 * truncated towards -inf, r.rem will be positive (will
-	 * have the opposite sign of num).  These are considered
-	 * `wrong'.
-	 *
-	 * If both are num and denom are positive, r will always
-	 * be positive.
-	 *
-	 * This all boils down to:
-	 *	if num >= 0, but r.rem < 0, we got the wrong answer.
-	 * In that case, to get the right answer, add 1 to r.quot and
-	 * subtract denom from r.rem.
-	 *      if num < 0, but r.rem > 0, we also have the wrong answer.
-	 * In this case, to get the right answer, subtract 1 from r.quot and
-	 * add denom to r.rem.
-	 */
-	if (num >= 0 && r.rem < 0) {
-		++r.quot;
-		r.rem -= denom;
-	}
-	else if (num < 0 && r.rem > 0) {
-		--r.quot;
-		r.rem += denom;
-	}
-	return (r);
-}
diff --git a/newlib/libc/stdlib/drand48.c b/newlib/libc/stdlib/drand48.c
deleted file mode 100644
index 89fe6af1d..000000000
--- a/newlib/libc/stdlib/drand48.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-double
-_DEFUN (_drand48_r, (r),
-       struct _reent *r)
-{
-  _REENT_CHECK_RAND48(r);
-  return _erand48_r(r, __rand48_seed);
-}
-
-#ifndef _REENT_ONLY
-double
-_DEFUN_VOID (drand48)
-{
-  return _drand48_r (_REENT);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/dtoa.c b/newlib/libc/stdlib/dtoa.c
deleted file mode 100644
index 62597c755..000000000
--- a/newlib/libc/stdlib/dtoa.c
+++ /dev/null
@@ -1,854 +0,0 @@
-/****************************************************************
- *
- * The author of this software is David M. Gay.
- *
- * Copyright (c) 1991 by AT&T.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- ***************************************************************/
-
-/* Please send bug reports to
-	David M. Gay
-	AT&T Bell Laboratories, Room 2C-463
-	600 Mountain Avenue
-	Murray Hill, NJ 07974-2070
-	U.S.A.
-	dmg@research.att.com or research!dmg
- */
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <reent.h>
-#include <string.h>
-#include "mprec.h"
-
-static int
-_DEFUN (quorem,
-	(b, S),
-	_Bigint * b _AND _Bigint * S)
-{
-  int n;
-  __Long borrow, y;
-  __ULong carry, q, ys;
-  __ULong *bx, *bxe, *sx, *sxe;
-#ifdef Pack_32
-  __Long z;
-  __ULong si, zs;
-#endif
-
-  n = S->_wds;
-#ifdef DEBUG
-  /*debug*/ if (b->_wds > n)
-    /*debug*/ Bug ("oversize b in quorem");
-#endif
-  if (b->_wds < n)
-    return 0;
-  sx = S->_x;
-  sxe = sx + --n;
-  bx = b->_x;
-  bxe = bx + n;
-  q = *bxe / (*sxe + 1);	/* ensure q <= true quotient */
-#ifdef DEBUG
-  /*debug*/ if (q > 9)
-    /*debug*/ Bug ("oversized quotient in quorem");
-#endif
-  if (q)
-    {
-      borrow = 0;
-      carry = 0;
-      do
-	{
-#ifdef Pack_32
-	  si = *sx++;
-	  ys = (si & 0xffff) * q + carry;
-	  zs = (si >> 16) * q + (ys >> 16);
-	  carry = zs >> 16;
-	  y = (*bx & 0xffff) - (ys & 0xffff) + borrow;
-	  borrow = y >> 16;
-	  Sign_Extend (borrow, y);
-	  z = (*bx >> 16) - (zs & 0xffff) + borrow;
-	  borrow = z >> 16;
-	  Sign_Extend (borrow, z);
-	  Storeinc (bx, z, y);
-#else
-	  ys = *sx++ * q + carry;
-	  carry = ys >> 16;
-	  y = *bx - (ys & 0xffff) + borrow;
-	  borrow = y >> 16;
-	  Sign_Extend (borrow, y);
-	  *bx++ = y & 0xffff;
-#endif
-	}
-      while (sx <= sxe);
-      if (!*bxe)
-	{
-	  bx = b->_x;
-	  while (--bxe > bx && !*bxe)
-	    --n;
-	  b->_wds = n;
-	}
-    }
-  if (cmp (b, S) >= 0)
-    {
-      q++;
-      borrow = 0;
-      carry = 0;
-      bx = b->_x;
-      sx = S->_x;
-      do
-	{
-#ifdef Pack_32
-	  si = *sx++;
-	  ys = (si & 0xffff) + carry;
-	  zs = (si >> 16) + (ys >> 16);
-	  carry = zs >> 16;
-	  y = (*bx & 0xffff) - (ys & 0xffff) + borrow;
-	  borrow = y >> 16;
-	  Sign_Extend (borrow, y);
-	  z = (*bx >> 16) - (zs & 0xffff) + borrow;
-	  borrow = z >> 16;
-	  Sign_Extend (borrow, z);
-	  Storeinc (bx, z, y);
-#else
-	  ys = *sx++ + carry;
-	  carry = ys >> 16;
-	  y = *bx - (ys & 0xffff) + borrow;
-	  borrow = y >> 16;
-	  Sign_Extend (borrow, y);
-	  *bx++ = y & 0xffff;
-#endif
-	}
-      while (sx <= sxe);
-      bx = b->_x;
-      bxe = bx + n;
-      if (!*bxe)
-	{
-	  while (--bxe > bx && !*bxe)
-	    --n;
-	  b->_wds = n;
-	}
-    }
-  return q;
-}
-
-/* dtoa for IEEE arithmetic (dmg): convert double to ASCII string.
- *
- * Inspired by "How to Print Floating-Point Numbers Accurately" by
- * Guy L. Steele, Jr. and Jon L. White [Proc. ACM SIGPLAN '90, pp. 92-101].
- *
- * Modifications:
- *	1. Rather than iterating, we use a simple numeric overestimate
- *	   to determine k = floor(log10(d)).  We scale relevant
- *	   quantities using O(log2(k)) rather than O(k) multiplications.
- *	2. For some modes > 2 (corresponding to ecvt and fcvt), we don't
- *	   try to generate digits strictly left to right.  Instead, we
- *	   compute with fewer bits and propagate the carry if necessary
- *	   when rounding the final digit up.  This is often faster.
- *	3. Under the assumption that input will be rounded nearest,
- *	   mode 0 renders 1e23 as 1e23 rather than 9.999999999999999e22.
- *	   That is, we allow equality in stopping tests when the
- *	   round-nearest rule will give the same floating-point value
- *	   as would satisfaction of the stopping test with strict
- *	   inequality.
- *	4. We remove common factors of powers of 2 from relevant
- *	   quantities.
- *	5. When converting floating-point integers less than 1e16,
- *	   we use floating-point arithmetic rather than resorting
- *	   to multiple-precision integers.
- *	6. When asked to produce fewer than 15 digits, we first try
- *	   to get by with floating-point arithmetic; we resort to
- *	   multiple-precision integer arithmetic only if we cannot
- *	   guarantee that the floating-point calculation has given
- *	   the correctly rounded result.  For k requested digits and
- *	   "uniformly" distributed input, the probability is
- *	   something like 10^(k-15) that we must resort to the long
- *	   calculation.
- */
-
-
-char *
-_DEFUN (_dtoa_r,
-	(ptr, _d, mode, ndigits, decpt, sign, rve),
-	struct _reent *ptr _AND
-	double _d _AND
-	int mode _AND
-	int ndigits _AND
-	int *decpt _AND
-	int *sign _AND
-	char **rve)
-{
-  /*	Arguments ndigits, decpt, sign are similar to those
-	of ecvt and fcvt; trailing zeros are suppressed from
-	the returned string.  If not null, *rve is set to point
-	to the end of the return value.  If d is +-Infinity or NaN,
-	then *decpt is set to 9999.
-
-	mode:
-		0 ==> shortest string that yields d when read in
-			and rounded to nearest.
-		1 ==> like 0, but with Steele & White stopping rule;
-			e.g. with IEEE P754 arithmetic , mode 0 gives
-			1e23 whereas mode 1 gives 9.999999999999999e22.
-		2 ==> max(1,ndigits) significant digits.  This gives a
-			return value similar to that of ecvt, except
-			that trailing zeros are suppressed.
-		3 ==> through ndigits past the decimal point.  This
-			gives a return value similar to that from fcvt,
-			except that trailing zeros are suppressed, and
-			ndigits can be negative.
-		4-9 should give the same return values as 2-3, i.e.,
-			4 <= mode <= 9 ==> same return as mode
-			2 + (mode & 1).  These modes are mainly for
-			debugging; often they run slower but sometimes
-			faster than modes 2-3.
-		4,5,8,9 ==> left-to-right digit generation.
-		6-9 ==> don't try fast floating-point estimate
-			(if applicable).
-
-		Values of mode other than 0-9 are treated as mode 0.
-
-		Sufficient space is allocated to the return value
-		to hold the suppressed trailing zeros.
-	*/
-
-  int bbits, b2, b5, be, dig, i, ieps, ilim, ilim0, ilim1, j, j1, k, k0,
-    k_check, leftright, m2, m5, s2, s5, spec_case, try_quick;
-  union double_union d, d2, eps;
-  __Long L;
-#ifndef Sudden_Underflow
-  int denorm;
-  __ULong x;
-#endif
-  _Bigint *b, *b1, *delta, *mlo = NULL, *mhi, *S;
-  double ds;
-  char *s, *s0;
-
-  d.d = _d;
-
-  _REENT_CHECK_MP(ptr);
-  if (_REENT_MP_RESULT(ptr))
-    {
-      _REENT_MP_RESULT(ptr)->_k = _REENT_MP_RESULT_K(ptr);
-      _REENT_MP_RESULT(ptr)->_maxwds = 1 << _REENT_MP_RESULT_K(ptr);
-      Bfree (ptr, _REENT_MP_RESULT(ptr));
-      _REENT_MP_RESULT(ptr) = 0;
-    }
-
-  if (word0 (d) & Sign_bit)
-    {
-      /* set sign for everything, including 0's and NaNs */
-      *sign = 1;
-      word0 (d) &= ~Sign_bit;	/* clear sign bit */
-    }
-  else
-    *sign = 0;
-
-#if defined(IEEE_Arith) + defined(VAX)
-#ifdef IEEE_Arith
-  if ((word0 (d) & Exp_mask) == Exp_mask)
-#else
-  if (word0 (d) == 0x8000)
-#endif
-    {
-      /* Infinity or NaN */
-      *decpt = 9999;
-      s =
-#ifdef IEEE_Arith
-	!word1 (d) && !(word0 (d) & 0xfffff) ? "Infinity" :
-#endif
-	"NaN";
-      if (rve)
-	*rve =
-#ifdef IEEE_Arith
-	  s[3] ? s + 8 :
-#endif
-	  s + 3;
-      return s;
-    }
-#endif
-#ifdef IBM
-  d.d += 0;			/* normalize */
-#endif
-  if (!d.d)
-    {
-      *decpt = 1;
-      s = "0";
-      if (rve)
-	*rve = s + 1;
-      return s;
-    }
-
-  b = d2b (ptr, d.d, &be, &bbits);
-#ifdef Sudden_Underflow
-  i = (int) (word0 (d) >> Exp_shift1 & (Exp_mask >> Exp_shift1));
-#else
-  if ((i = (int) (word0 (d) >> Exp_shift1 & (Exp_mask >> Exp_shift1))) != 0)
-    {
-#endif
-      d2.d = d.d;
-      word0 (d2) &= Frac_mask1;
-      word0 (d2) |= Exp_11;
-#ifdef IBM
-      if (j = 11 - hi0bits (word0 (d2) & Frac_mask))
-	d2.d /= 1 << j;
-#endif
-
-      /* log(x)	~=~ log(1.5) + (x-1.5)/1.5
-		 * log10(x)	 =  log(x) / log(10)
-		 *		~=~ log(1.5)/log(10) + (x-1.5)/(1.5*log(10))
-		 * log10(d) = (i-Bias)*log(2)/log(10) + log10(d2)
-		 *
-		 * This suggests computing an approximation k to log10(d) by
-		 *
-		 * k = (i - Bias)*0.301029995663981
-		 *	+ ( (d2-1.5)*0.289529654602168 + 0.176091259055681 );
-		 *
-		 * We want k to be too large rather than too small.
-		 * The error in the first-order Taylor series approximation
-		 * is in our favor, so we just round up the constant enough
-		 * to compensate for any error in the multiplication of
-		 * (i - Bias) by 0.301029995663981; since |i - Bias| <= 1077,
-		 * and 1077 * 0.30103 * 2^-52 ~=~ 7.2e-14,
-		 * adding 1e-13 to the constant term more than suffices.
-		 * Hence we adjust the constant term to 0.1760912590558.
-		 * (We could get a more accurate k by invoking log10,
-		 *  but this is probably not worthwhile.)
-		 */
-
-      i -= Bias;
-#ifdef IBM
-      i <<= 2;
-      i += j;
-#endif
-#ifndef Sudden_Underflow
-      denorm = 0;
-    }
-  else
-    {
-      /* d is denormalized */
-
-      i = bbits + be + (Bias + (P - 1) - 1);
-      x = (i > 32) ? (word0 (d) << (64 - i)) | (word1 (d) >> (i - 32))
-       : (word1 (d) << (32 - i));
-      d2.d = x;
-      word0 (d2) -= 31 * Exp_msk1;	/* adjust exponent */
-      i -= (Bias + (P - 1) - 1) + 1;
-      denorm = 1;
-    }
-#endif
-  ds = (d2.d - 1.5) * 0.289529654602168 + 0.1760912590558 + i * 0.301029995663981;
-  k = (int) ds;
-  if (ds < 0. && ds != k)
-    k--;			/* want k = floor(ds) */
-  k_check = 1;
-  if (k >= 0 && k <= Ten_pmax)
-    {
-      if (d.d < tens[k])
-	k--;
-      k_check = 0;
-    }
-  j = bbits - i - 1;
-  if (j >= 0)
-    {
-      b2 = 0;
-      s2 = j;
-    }
-  else
-    {
-      b2 = -j;
-      s2 = 0;
-    }
-  if (k >= 0)
-    {
-      b5 = 0;
-      s5 = k;
-      s2 += k;
-    }
-  else
-    {
-      b2 -= k;
-      b5 = -k;
-      s5 = 0;
-    }
-  if (mode < 0 || mode > 9)
-    mode = 0;
-  try_quick = 1;
-  if (mode > 5)
-    {
-      mode -= 4;
-      try_quick = 0;
-    }
-  leftright = 1;
-  ilim = ilim1 = -1;
-  switch (mode)
-    {
-    case 0:
-    case 1:
-      i = 18;
-      ndigits = 0;
-      break;
-    case 2:
-      leftright = 0;
-      /* no break */
-    case 4:
-      if (ndigits <= 0)
-	ndigits = 1;
-      ilim = ilim1 = i = ndigits;
-      break;
-    case 3:
-      leftright = 0;
-      /* no break */
-    case 5:
-      i = ndigits + k + 1;
-      ilim = i;
-      ilim1 = i - 1;
-      if (i <= 0)
-	i = 1;
-    }
-  j = sizeof (__ULong);
-  for (_REENT_MP_RESULT_K(ptr) = 0; sizeof (_Bigint) - sizeof (__ULong) + j <= i;
-       j <<= 1)
-    _REENT_MP_RESULT_K(ptr)++;
-  _REENT_MP_RESULT(ptr) = Balloc (ptr, _REENT_MP_RESULT_K(ptr));
-  s = s0 = (char *) _REENT_MP_RESULT(ptr);
-
-  if (ilim >= 0 && ilim <= Quick_max && try_quick)
-    {
-      /* Try to get by with floating-point arithmetic. */
-
-      i = 0;
-      d2.d = d.d;
-      k0 = k;
-      ilim0 = ilim;
-      ieps = 2;			/* conservative */
-      if (k > 0)
-	{
-	  ds = tens[k & 0xf];
-	  j = k >> 4;
-	  if (j & Bletch)
-	    {
-	      /* prevent overflows */
-	      j &= Bletch - 1;
-	      d.d /= bigtens[n_bigtens - 1];
-	      ieps++;
-	    }
-	  for (; j; j >>= 1, i++)
-	    if (j & 1)
-	      {
-		ieps++;
-		ds *= bigtens[i];
-	      }
-	  d.d /= ds;
-	}
-      else if ((j1 = -k) != 0)
-	{
-	  d.d *= tens[j1 & 0xf];
-	  for (j = j1 >> 4; j; j >>= 1, i++)
-	    if (j & 1)
-	      {
-		ieps++;
-		d.d *= bigtens[i];
-	      }
-	}
-      if (k_check && d.d < 1. && ilim > 0)
-	{
-	  if (ilim1 <= 0)
-	    goto fast_failed;
-	  ilim = ilim1;
-	  k--;
-	  d.d *= 10.;
-	  ieps++;
-	}
-      eps.d = ieps * d.d + 7.;
-      word0 (eps) -= (P - 1) * Exp_msk1;
-      if (ilim == 0)
-	{
-	  S = mhi = 0;
-	  d.d -= 5.;
-	  if (d.d > eps.d)
-	    goto one_digit;
-	  if (d.d < -eps.d)
-	    goto no_digits;
-	  goto fast_failed;
-	}
-#ifndef No_leftright
-      if (leftright)
-	{
-	  /* Use Steele & White method of only
-	   * generating digits needed.
-	   */
-	  eps.d = 0.5 / tens[ilim - 1] - eps.d;
-	  for (i = 0;;)
-	    {
-	      L = d.d;
-	      d.d -= L;
-	      *s++ = '0' + (int) L;
-	      if (d.d < eps.d)
-		goto ret1;
-	      if (1. - d.d < eps.d)
-		goto bump_up;
-	      if (++i >= ilim)
-		break;
-	      eps.d *= 10.;
-	      d.d *= 10.;
-	    }
-	}
-      else
-	{
-#endif
-	  /* Generate ilim digits, then fix them up. */
-	  eps.d *= tens[ilim - 1];
-	  for (i = 1;; i++, d.d *= 10.)
-	    {
-	      L = d.d;
-	      d.d -= L;
-	      *s++ = '0' + (int) L;
-	      if (i == ilim)
-		{
-		  if (d.d > 0.5 + eps.d)
-		    goto bump_up;
-		  else if (d.d < 0.5 - eps.d)
-		    {
-		      while (*--s == '0');
-		      s++;
-		      goto ret1;
-		    }
-		  break;
-		}
-	    }
-#ifndef No_leftright
-	}
-#endif
-    fast_failed:
-      s = s0;
-      d.d = d2.d;
-      k = k0;
-      ilim = ilim0;
-    }
-
-  /* Do we have a "small" integer? */
-
-  if (be >= 0 && k <= Int_max)
-    {
-      /* Yes. */
-      ds = tens[k];
-      if (ndigits < 0 && ilim <= 0)
-	{
-	  S = mhi = 0;
-	  if (ilim < 0 || d.d <= 5 * ds)
-	    goto no_digits;
-	  goto one_digit;
-	}
-      for (i = 1;; i++)
-	{
-	  L = d.d / ds;
-	  d.d -= L * ds;
-#ifdef Check_FLT_ROUNDS
-	  /* If FLT_ROUNDS == 2, L will usually be high by 1 */
-	  if (d.d < 0)
-	    {
-	      L--;
-	      d.d += ds;
-	    }
-#endif
-	  *s++ = '0' + (int) L;
-	  if (i == ilim)
-	    {
-	      d.d += d.d;
-             if ((d.d > ds) || ((d.d == ds) && (L & 1)))
-		{
-		bump_up:
-		  while (*--s == '9')
-		    if (s == s0)
-		      {
-			k++;
-			*s = '0';
-			break;
-		      }
-		  ++*s++;
-		}
-	      break;
-	    }
-	  if (!(d.d *= 10.))
-	    break;
-	}
-      goto ret1;
-    }
-
-  m2 = b2;
-  m5 = b5;
-  mhi = mlo = 0;
-  if (leftright)
-    {
-      if (mode < 2)
-	{
-	  i =
-#ifndef Sudden_Underflow
-	    denorm ? be + (Bias + (P - 1) - 1 + 1) :
-#endif
-#ifdef IBM
-	    1 + 4 * P - 3 - bbits + ((bbits + be - 1) & 3);
-#else
-	    1 + P - bbits;
-#endif
-	}
-      else
-	{
-	  j = ilim - 1;
-	  if (m5 >= j)
-	    m5 -= j;
-	  else
-	    {
-	      s5 += j -= m5;
-	      b5 += j;
-	      m5 = 0;
-	    }
-	  if ((i = ilim) < 0)
-	    {
-	      m2 -= i;
-	      i = 0;
-	    }
-	}
-      b2 += i;
-      s2 += i;
-      mhi = i2b (ptr, 1);
-    }
-  if (m2 > 0 && s2 > 0)
-    {
-      i = m2 < s2 ? m2 : s2;
-      b2 -= i;
-      m2 -= i;
-      s2 -= i;
-    }
-  if (b5 > 0)
-    {
-      if (leftright)
-	{
-	  if (m5 > 0)
-	    {
-	      mhi = pow5mult (ptr, mhi, m5);
-	      b1 = mult (ptr, mhi, b);
-	      Bfree (ptr, b);
-	      b = b1;
-	    }
-         if ((j = b5 - m5) != 0)
-	    b = pow5mult (ptr, b, j);
-	}
-      else
-	b = pow5mult (ptr, b, b5);
-    }
-  S = i2b (ptr, 1);
-  if (s5 > 0)
-    S = pow5mult (ptr, S, s5);
-
-  /* Check for special case that d is a normalized power of 2. */
-
-  spec_case = 0;
-  if (mode < 2)
-    {
-      if (!word1 (d) && !(word0 (d) & Bndry_mask)
-#ifndef Sudden_Underflow
-	  && word0 (d) & Exp_mask
-#endif
-	)
-	{
-	  /* The special case */
-	  b2 += Log2P;
-	  s2 += Log2P;
-	  spec_case = 1;
-	}
-    }
-
-  /* Arrange for convenient computation of quotients:
-   * shift left if necessary so divisor has 4 leading 0 bits.
-   *
-   * Perhaps we should just compute leading 28 bits of S once
-   * and for all and pass them and a shift to quorem, so it
-   * can do shifts and ors to compute the numerator for q.
-   */
-
-#ifdef Pack_32
-  if ((i = ((s5 ? 32 - hi0bits (S->_x[S->_wds - 1]) : 1) + s2) & 0x1f) != 0)
-    i = 32 - i;
-#else
-  if ((i = ((s5 ? 32 - hi0bits (S->_x[S->_wds - 1]) : 1) + s2) & 0xf) != 0)
-    i = 16 - i;
-#endif
-  if (i > 4)
-    {
-      i -= 4;
-      b2 += i;
-      m2 += i;
-      s2 += i;
-    }
-  else if (i < 4)
-    {
-      i += 28;
-      b2 += i;
-      m2 += i;
-      s2 += i;
-    }
-  if (b2 > 0)
-    b = lshift (ptr, b, b2);
-  if (s2 > 0)
-    S = lshift (ptr, S, s2);
-  if (k_check)
-    {
-      if (cmp (b, S) < 0)
-	{
-	  k--;
-	  b = multadd (ptr, b, 10, 0);	/* we botched the k estimate */
-	  if (leftright)
-	    mhi = multadd (ptr, mhi, 10, 0);
-	  ilim = ilim1;
-	}
-    }
-  if (ilim <= 0 && mode > 2)
-    {
-      if (ilim < 0 || cmp (b, S = multadd (ptr, S, 5, 0)) <= 0)
-	{
-	  /* no digits, fcvt style */
-	no_digits:
-	  k = -1 - ndigits;
-	  goto ret;
-	}
-    one_digit:
-      *s++ = '1';
-      k++;
-      goto ret;
-    }
-  if (leftright)
-    {
-      if (m2 > 0)
-	mhi = lshift (ptr, mhi, m2);
-
-      /* Compute mlo -- check for special case
-       * that d is a normalized power of 2.
-       */
-
-      mlo = mhi;
-      if (spec_case)
-	{
-	  mhi = Balloc (ptr, mhi->_k);
-	  Bcopy (mhi, mlo);
-	  mhi = lshift (ptr, mhi, Log2P);
-	}
-
-      for (i = 1;; i++)
-	{
-	  dig = quorem (b, S) + '0';
-	  /* Do we yet have the shortest decimal string
-	   * that will round to d?
-	   */
-	  j = cmp (b, mlo);
-	  delta = diff (ptr, S, mhi);
-	  j1 = delta->_sign ? 1 : cmp (b, delta);
-	  Bfree (ptr, delta);
-#ifndef ROUND_BIASED
-	  if (j1 == 0 && !mode && !(word1 (d) & 1))
-	    {
-	      if (dig == '9')
-		goto round_9_up;
-	      if (j > 0)
-		dig++;
-	      *s++ = dig;
-	      goto ret;
-	    }
-#endif
-         if ((j < 0) || ((j == 0) && !mode
-#ifndef ROUND_BIASED
-	      && !(word1 (d) & 1)
-#endif
-           ))
-	    {
-	      if (j1 > 0)
-		{
-		  b = lshift (ptr, b, 1);
-		  j1 = cmp (b, S);
-                 if (((j1 > 0) || ((j1 == 0) && (dig & 1)))
-		      && dig++ == '9')
-		    goto round_9_up;
-		}
-	      *s++ = dig;
-	      goto ret;
-	    }
-	  if (j1 > 0)
-	    {
-	      if (dig == '9')
-		{		/* possible if i == 1 */
-		round_9_up:
-		  *s++ = '9';
-		  goto roundoff;
-		}
-	      *s++ = dig + 1;
-	      goto ret;
-	    }
-	  *s++ = dig;
-	  if (i == ilim)
-	    break;
-	  b = multadd (ptr, b, 10, 0);
-	  if (mlo == mhi)
-	    mlo = mhi = multadd (ptr, mhi, 10, 0);
-	  else
-	    {
-	      mlo = multadd (ptr, mlo, 10, 0);
-	      mhi = multadd (ptr, mhi, 10, 0);
-	    }
-	}
-    }
-  else
-    for (i = 1;; i++)
-      {
-	*s++ = dig = quorem (b, S) + '0';
-	if (i >= ilim)
-	  break;
-	b = multadd (ptr, b, 10, 0);
-      }
-
-  /* Round off last digit */
-
-  b = lshift (ptr, b, 1);
-  j = cmp (b, S);
-  if ((j > 0) || ((j == 0) && (dig & 1)))
-    {
-    roundoff:
-      while (*--s == '9')
-	if (s == s0)
-	  {
-	    k++;
-	    *s++ = '1';
-	    goto ret;
-	  }
-      ++*s++;
-    }
-  else
-    {
-      while (*--s == '0');
-      s++;
-    }
-ret:
-  Bfree (ptr, S);
-  if (mhi)
-    {
-      if (mlo && mlo != mhi)
-	Bfree (ptr, mlo);
-      Bfree (ptr, mhi);
-    }
-ret1:
-  Bfree (ptr, b);
-  *s = 0;
-  *decpt = k + 1;
-  if (rve)
-    *rve = s;
-  return s0;
-}
diff --git a/newlib/libc/stdlib/dtoastub.c b/newlib/libc/stdlib/dtoastub.c
deleted file mode 100644
index ff2b087f2..000000000
--- a/newlib/libc/stdlib/dtoastub.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <_ansi.h>
-#include <stdlib.h>
-#include <reent.h>
-#include <string.h>
-
-/* Nothing in newlib actually *calls* dtoa, they all call _dtoa_r, so this 
-   is a safe way of providing it to the user. */
-#ifndef NO_REENT
-
-char *
-_DEFUN (__dtoa,
-	(d, mode, ndigits, decpt, sign, rve),
-	double d _AND
-	int mode _AND
-	int ndigits _AND
-	int *decpt _AND
-	int *sign _AND
-	char **rve)
-{
-  return _dtoa_r (_REENT, d, mode, ndigits, decpt, sign, rve);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/ecvtbuf.c b/newlib/libc/stdlib/ecvtbuf.c
deleted file mode 100644
index 2b9b9eb8a..000000000
--- a/newlib/libc/stdlib/ecvtbuf.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
-FUNCTION
-<<ecvtbuf>>, <<fcvtbuf>>---double or float to string
-
-INDEX
-	ecvtbuf
-INDEX
-	fcvtbuf
-
-ANSI_SYNOPSIS
-	#include <stdio.h>
-
-	char *ecvtbuf(double <[val]>, int <[chars]>, int *<[decpt]>,
-                       int *<[sgn]>, char *<[buf]>);
-
-	char *fcvtbuf(double <[val]>, int <[decimals]>, int *<[decpt]>,
-                       int *<[sgn]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <stdio.h>
-
-	char *ecvtbuf(<[val]>, <[chars]>, <[decpt]>, <[sgn]>, <[buf]>);
-	double <[val]>;
-	int <[chars]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-	char *<[buf]>;
-
-	char *fcvtbuf(<[val]>, <[decimals]>, <[decpt]>, <[sgn]>, <[buf]>);
-	double <[val]>;
-	int <[decimals]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-	char *<[buf]>;
-
-DESCRIPTION
-	<<ecvtbuf>> and <<fcvtbuf>> produce (null-terminated) strings
-	of digits representating the <<double>> number <[val]>.
-
-	The only difference between <<ecvtbuf>> and <<fcvtbuf>> is the
-	interpretation of the second argument (<[chars]> or
-	<[decimals]>). For <<ecvtbuf>>, the second argument <[chars]>
-	specifies the total number of characters to write (which is
-	also the number of significant digits in the formatted string,
-	since these two functions write only digits). For <<fcvtbuf>>,
-	the second argument <[decimals]> specifies the number of
-	characters to write after the decimal point; all digits for
-	the integer part of <[val]> are always included.
-
-	Since <<ecvtbuf>> and <<fcvtbuf>> write only digits in the
-	output string, they record the location of the decimal point
-	in <<*<[decpt]>>>, and the sign of the number in <<*<[sgn]>>>.
-	After formatting a number, <<*<[decpt]>>> contains the number
-	of digits to the left of the decimal point.  <<*<[sgn]>>>
-	contains <<0>> if the number is positive, and <<1>> if it is
-	negative.  For both functions, you supply a pointer <[buf]> to
-	an area of memory to hold the converted string.
-
-RETURNS
-	Both functions return a pointer to <[buf]>, the string
-	containing a character representation of <[val]>.
-
-PORTABILITY
-	Neither function is ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <string.h>
-#include <reent.h>
-#include "mprec.h"
-#include "local.h"
-
-static void
-_DEFUN (print_f, (ptr, buf, invalue, ndigit, type, dot, mode),
-	struct _reent *ptr _AND
-	char *buf _AND
-	double invalue _AND
-	int ndigit _AND
-	char type _AND
-	int dot _AND
-	int mode)
-{
-  int decpt;
-  int sign;
-  char *p, *start, *end;
-
-  start = p = _dtoa_r (ptr, invalue, mode, ndigit, &decpt, &sign, &end);
-
-  if (decpt == 9999)
-    {
-      strcpy (buf, p);
-      return;
-    }
-  while (*p && decpt > 0)
-    {
-      *buf++ = *p++;
-      decpt--;
-    }
-  /* Even if not in buffer */
-  while (decpt > 0)
-    {
-      *buf++ = '0';
-      decpt--;
-    }
-
-  if (dot || *p)
-    {
-      if (p == start)
-	*buf++ = '0';
-      *buf++ = '.';
-      while (decpt < 0 && ndigit > 0)
-	{
-	  *buf++ = '0';
-	  decpt++;
-	  ndigit--;
-	}
-
-      /* Print rest of stuff */
-      while (*p && ndigit > 0)
-	{
-	  *buf++ = *p++;
-	  ndigit--;
-	}
-      /* And trailing zeros */
-      while (ndigit > 0)
-	{
-	  *buf++ = '0';
-	  ndigit--;
-	}
-    }
-  *buf++ = 0;
-}
-
-/* Print number in e format with width chars after.
-
-   TYPE is one of 'e' or 'E'.  It may also be one of 'g' or 'G' indicating
-   that _gcvt is calling us and we should remove trailing zeroes.
-
-   WIDTH is the number of digits of precision after the decimal point.  */
-
-static void
-_DEFUN (print_e, (ptr, buf, invalue, width, type, dot),
-	struct _reent *ptr _AND
-	char *buf _AND
-	double invalue _AND
-	int width _AND
-	char type _AND
-	int dot)
-{
-  int sign;
-  char *end;
-  char *p;
-  int decpt;
-  int top;
-  int ndigit = width;
-
-  p = _dtoa_r (ptr, invalue, 2, width + 1, &decpt, &sign, &end);
-
-  if (decpt == 9999)
-    {
-      strcpy (buf, p);
-      return;
-    }
-
-  *buf++ = *p++;
-  if (dot || ndigit != 0)
-    *buf++ = '.';
-
-  while (*p && ndigit > 0)
-    {
-      *buf++ = *p++;
-      ndigit--;
-    }
-
-  /* Add trailing zeroes to fill out to ndigits unless this is 'g' format.
-     Also, convert g/G to e/E.  */
-
-  if (type == 'g')
-    type = 'e';
-  else if (type == 'G')
-    type = 'E';
-  else
-    {
-      while (ndigit > 0)
-	{
-	  *buf++ = '0';
-	  ndigit--;
-	}
-    }
-
-  /* Add the exponent.  */
-
-  *buf++ = type;
-  decpt--;
-  if (decpt < 0)
-    {
-      *buf++ = '-';
-      decpt = -decpt;
-    }
-  else
-    {
-      *buf++ = '+';
-    }
-  if (decpt > 99)
-    {
-      int top = decpt / 100;
-      *buf++ = top + '0';
-      decpt -= top * 100;
-    }
-  top = decpt / 10;
-  *buf++ = top + '0';
-  decpt -= top * 10;
-  *buf++ = decpt + '0';
-
-  *buf++ = 0;
-}
-
-#ifndef _REENT_ONLY
-
-/* Undocumented behaviour: when given NULL as a buffer, return a
-   pointer to static space in the rent structure.  This is only to
-   support ecvt and fcvt, which aren't ANSI anyway.  */
-
-char *
-_DEFUN (fcvtbuf, (invalue, ndigit, decpt, sign, fcvt_buf),
-	double invalue _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign _AND
-	char *fcvt_buf)
-{
-  char *save;
-  char *p;
-  char *end;
-  int done = 0;
-
-  if (fcvt_buf == NULL)
-    {
-      if (_REENT->_cvtlen <= ndigit + 35)
-	{
-	  if ((fcvt_buf = (char *) _realloc_r (_REENT, _REENT->_cvtbuf,
-					       ndigit + 36)) == NULL)
-	    return NULL;
-	  _REENT->_cvtlen = ndigit + 36;
-	  _REENT->_cvtbuf = fcvt_buf;
-	}
-
-      fcvt_buf = _REENT->_cvtbuf ;
-    }
-
-  save = fcvt_buf;
-
-  if (invalue < 1.0 && invalue > -1.0)
-    {
-      p = _dtoa_r (_REENT, invalue, 2, ndigit, decpt, sign, &end);
-    }
-  else
-    {
-      p = _dtoa_r (_REENT, invalue, 3, ndigit, decpt, sign, &end);
-    }
-
-  /* Now copy */
-
-  done = -*decpt;
-  while (p < end)
-    {
-      *fcvt_buf++ = *p++;
-      done++;
-    }
-  /* And unsuppress the trailing zeroes */
-  while (done < ndigit)
-    {
-      *fcvt_buf++ = '0';
-      done++;
-    }
-  *fcvt_buf++ = 0;
-  return save;
-}
-
-char *
-_DEFUN (ecvtbuf, (invalue, ndigit, decpt, sign, fcvt_buf),
-	double invalue _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign _AND
-	char *fcvt_buf)
-{
-  char *save;
-  char *p;
-  char *end;
-  int done = 0;
-
-  if (fcvt_buf == NULL)
-    {
-      if (_REENT->_cvtlen <= ndigit)
-	{
-	  if ((fcvt_buf = (char *) _realloc_r (_REENT, _REENT->_cvtbuf,
-					       ndigit + 1)) == NULL)
-	    return NULL;
-	  _REENT->_cvtlen = ndigit + 1;
-	  _REENT->_cvtbuf = fcvt_buf;
-	}
-
-      fcvt_buf = _REENT->_cvtbuf ;
-    }
-
-  save = fcvt_buf;
-
-  p = _dtoa_r (_REENT, invalue, 2, ndigit, decpt, sign, &end);
-
-  /* Now copy */
-
-  while (p < end)
-    {
-      *fcvt_buf++ = *p++;
-      done++;
-    }
-  /* And unsuppress the trailing zeroes */
-  while (done < ndigit)
-    {
-      *fcvt_buf++ = '0';
-      done++;
-    }
-  *fcvt_buf++ = 0;
-  return save;
-}
-
-#endif
-
-char *
-_DEFUN (_gcvt, (ptr, invalue, ndigit, buf, type, dot),
-	struct _reent *ptr _AND
-	double invalue _AND
-	int ndigit _AND
-	char *buf _AND
-	char type _AND
-	int dot)
-{
-  char *save = buf;
-
-  if (invalue < 0)
-    {
-      invalue = -invalue;
-    }
-
-  if (invalue == 0)
-    {
-      *buf++ = '0';
-      *buf = '\0';
-    }
-  else
-    /* Which one to print ?
-       ANSI says that anything with more that 4 zeros after the . or more
-       than precision digits before is printed in e with the qualification
-       that trailing zeroes are removed from the fraction portion.  */
-
-  if (0.0001 >= invalue || invalue >= _mprec_log10 (ndigit))
-    {
-      /* We subtract 1 from ndigit because in the 'e' format the precision is
-	 the number of digits after the . but in 'g' format it is the number
-	 of significant digits.
-
-	 We defer changing type to e/E so that print_e() can know it's us
-	 calling and thus should remove trailing zeroes.  */
-
-      print_e (ptr, buf, invalue, ndigit - 1, type, dot);
-    }
-  else
-    {
-      int decpt;
-      int sign;
-      char *end;
-      char *p;
-
-      if (invalue < 1.0)
-	{
-	  /* what we want is ndigits after the point */
-	  p = _dtoa_r (ptr, invalue, 3, ndigit, &decpt, &sign, &end);
-	}
-      else
-	{
-	  p = _dtoa_r (ptr, invalue, 2, ndigit, &decpt, &sign, &end);
-	}
-
-      if (decpt == 9999)
-	{
-	  strcpy (buf, p);
-	  return save;
-	}
-      while (*p && decpt > 0)
-	{
-	  *buf++ = *p++;
-	  decpt--;
-	  ndigit--;
-	}
-      /* Even if not in buffer */
-      while (decpt > 0 && ndigit > 0)
-	{
-	  *buf++ = '0';
-	  decpt--;
-	  ndigit--;
-	}
-
-      if (dot || *p)
-	{
-	  if (buf == save)
-	    *buf++ = '0';
-	  *buf++ = '.';
-	  while (decpt < 0 && ndigit > 0)
-	    {
-	      *buf++ = '0';
-	      decpt++;
-	      ndigit--;
-	    }
-
-	  /* Print rest of stuff */
-	  while (*p && ndigit > 0)
-	    {
-	      *buf++ = *p++;
-	      ndigit--;
-	    }
-	  /* And trailing zeros */
-	  if (dot)
-	    {
-	      while (ndigit > 0)
-		{
-		  *buf++ = '0';
-		  ndigit--;
-		}
-	    }
-	}
-      *buf++ = 0;
-    }
-
-  return save;
-}
-
-char *
-_DEFUN (_dcvt, (ptr, buffer, invalue, precision, width, type, dot),
-	struct _reent *ptr _AND
-	char *buffer _AND
-	double invalue _AND
-	int precision _AND
-	int width _AND
-	char type _AND
-	int dot)
-{
-  switch (type)
-    {
-    case 'f':
-    case 'F':
-      print_f (ptr, buffer, invalue, precision, type, precision == 0 ? dot : 1, 3);
-      break;
-    case 'g':
-    case 'G':
-      if (precision == 0)
-	precision = 1;
-      _gcvt (ptr, invalue, precision, buffer, type, dot);
-      break;
-    case 'e':
-    case 'E':
-      print_e (ptr, buffer, invalue, precision, type, dot);
-    }
-  return buffer;
-}
diff --git a/newlib/libc/stdlib/efgcvt.c b/newlib/libc/stdlib/efgcvt.c
deleted file mode 100644
index 556d22414..000000000
--- a/newlib/libc/stdlib/efgcvt.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
-FUNCTION
-<<ecvt>>,<<ecvtf>>,<<fcvt>>,<<fcvtf>>---double or float to string
-
-INDEX
-	ecvt
-INDEX
-	fcvt
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-
-	char *ecvt(double <[val]>, int <[chars]>, int *<[decpt]>, int *<[sgn]>);
-	char *ecvtf(float <[val]>, int <[chars]>, int *<[decpt]>, int *<[sgn]>);
-
-	char *fcvt(double <[val]>, int <[decimals]>, 
-                   int *<[decpt]>, int *<[sgn]>);
-	char *fcvtf(float <[val]>, int <[decimals]>, 
-                    int *<[decpt]>, int *<[sgn]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-
-	char *ecvt(<[val]>, <[chars]>, <[decpt]>, <[sgn]>);
-	double <[val]>;
-	int <[chars]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-	char *ecvtf(<[val]>, <[chars]>, <[decpt]>, <[sgn]>);
-	float <[val]>;
-	int <[chars]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-
-	char *fcvt(<[val]>, <[decimals]>, <[decpt]>, <[sgn]>);
-	double <[val]>;
-	int <[decimals]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-	char *fcvtf(<[val]>, <[decimals]>, <[decpt]>, <[sgn]>);
-	float <[val]>;
-	int <[decimals]>;
-	int *<[decpt]>;
-	int *<[sgn]>;
-
-DESCRIPTION
-<<ecvt>> and <<fcvt>> produce (null-terminated) strings of digits
-representating the <<double>> number <[val]>.
-<<ecvtf>> and <<fcvtf>> produce the corresponding character
-representations of <<float>> numbers.
-
-(The <<stdlib>> functions <<ecvtbuf>> and <<fcvtbuf>> are reentrant
-versions of <<ecvt>> and <<fcvt>>.)
-
-The only difference between <<ecvt>> and <<fcvt>> is the
-interpretation of the second argument (<[chars]> or <[decimals]>).
-For <<ecvt>>, the second argument <[chars]> specifies the total number
-of characters to write (which is also the number of significant digits
-in the formatted string, since these two functions write only digits).
-For <<fcvt>>, the second argument <[decimals]> specifies the number of
-characters to write after the decimal point; all digits for the integer
-part of <[val]> are always included.
-
-Since <<ecvt>> and <<fcvt>> write only digits in the output string,
-they record the location of the decimal point in <<*<[decpt]>>>, and
-the sign of the number in <<*<[sgn]>>>.  After formatting a number,
-<<*<[decpt]>>> contains the number of digits to the left of the
-decimal point.  <<*<[sgn]>>> contains <<0>> if the number is positive,
-and <<1>> if it is negative.
-
-RETURNS
-All four functions return a pointer to the new string containing a
-character representation of <[val]>.
-
-PORTABILITY
-None of these functions are ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-
-NEWPAGE
-FUNCTION
-<<gvcvt>>, <<gcvtf>>---format double or float as string
-
-INDEX
-	gcvt
-INDEX
-	gcvtf
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-
-	char *gcvt(double <[val]>, int <[precision]>, char *<[buf]>);
-	char *gcvtf(float <[val]>, int <[precision]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-
-	char *gcvt(<[val]>, <[precision]>, <[buf]>);
-	double <[val]>;
-	int <[precision]>;
-	char *<[buf]>;
-	char *gcvtf(<[val]>, <[precision]>, <[buf]>);
-	float <[val]>;
-	int <[precision]>;
-	char *<[buf]>;
-
-DESCRIPTION
-<<gcvt>> writes a fully formatted number as a null-terminated
-string in the buffer <<*<[buf]>>>.  <<gdvtf>> produces corresponding
-character representations of <<float>> numbers.
-
-<<gcvt>> uses the same rules as the <<printf>> format
-`<<%.<[precision]>g>>'---only negative values are signed (with
-`<<->>'), and either exponential or ordinary decimal-fraction format
-is chosen depending on the number of significant digits (specified by
-<[precision]>).
-
-RETURNS
-The result is a pointer to the formatted representation of <[val]>
-(the same as the argument <[buf]>).
-
-PORTABILITY
-Neither function is ANSI C.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include "local.h"
-
-char *
-_DEFUN (fcvt, (d, ndigit, decpt, sign),
-	double d _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign)
-{
-  return fcvtbuf (d, ndigit, decpt, sign, NULL);
-}
-
-char *
-_DEFUN (fcvtf, (d, ndigit, decpt, sign),
-	float d _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign)
-{
-  return fcvt ((float) d, ndigit, decpt, sign);
-}
-
-
-char *
-_DEFUN (gcvtf, (d, ndigit, buf),
-	float d _AND
-	int ndigit _AND
-	char *buf)
-{
-  double asd = d;
-  return gcvt (asd, ndigit, buf);
-}
-
-
-char *
-_DEFUN (ecvt, (d, ndigit, decpt, sign),
-	double d _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign)
-{
-  return ecvtbuf (d, ndigit, decpt, sign, NULL);
-}
-
-char *
-_DEFUN (ecvtf, (d, ndigit, decpt, sign),
-	float d _AND
-	int ndigit _AND
-	int *decpt _AND
-	int *sign)
-{
-  return ecvt ((double) d, ndigit, decpt, sign);
-}
-
-
-char *
-_DEFUN (gcvt, (d, ndigit, buf),
-	double d _AND
-	int ndigit _AND
-	char *buf)
-{
-  char *tbuf = buf;
-  if (d < 0) {
-    *buf = '-';
-    buf++;
-    ndigit--;
-  }
-  return (_gcvt (_REENT, d, ndigit, buf, 'g', 0) ? tbuf : 0);
-}
diff --git a/newlib/libc/stdlib/environ.c b/newlib/libc/stdlib/environ.c
deleted file mode 100644
index 8cc239237..000000000
--- a/newlib/libc/stdlib/environ.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (c) 1995, 1996, 2002 Red Hat Incorporated.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * 
- *    Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- *    Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- *    The name of Red Hat Incorporated may not be used to endorse
- *    or promote products derived from this software without specific
- *    prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Provide a definition of `environ' if crt0.o doesn't.  */
-
-static char *initial_env[] = { 0 };
-
-/* Posix says `environ' is a pointer to a null terminated list of pointers.
-   Hence `environ' itself is never NULL.  */
-char **environ = &initial_env[0];
diff --git a/newlib/libc/stdlib/envlock.c b/newlib/libc/stdlib/envlock.c
deleted file mode 100644
index 8e55de288..000000000
--- a/newlib/libc/stdlib/envlock.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-FUNCTION
-<<__env_lock>>, <<__env_unlock>>--lock environ variable
-
-INDEX
-	__env_lock
-INDEX
-	__env_unlock
-
-ANSI_SYNOPSIS
-	#include "envlock.h"
-       void __env_lock (struct _reent *<[reent]>);
-       void __env_unlock (struct _reent *<[reent]>);
-
-TRAD_SYNOPSIS
-	void __env_lock(<[reent]>)
-       struct _reent *<[reent]>;
-
-	void __env_unlock(<[reent]>)
-       struct _reent *<[reent]>;
-
-DESCRIPTION
-The <<setenv>> family of routines call these functions when they need
-to modify the environ variable.  The version of these routines supplied
-in the library does not do anything.  If multiple threads of execution
-can call <<setenv>>, or if <<setenv>> can be called reentrantly, then
-you need to define your own versions of these functions in order to
-safely lock the memory pool during a call.  If you do not, the memory
-pool may become corrupted.
-
-A call to <<setenv>> may call <<__env_lock>> recursively; that is,
-the sequence of calls may go <<__env_lock>>, <<__env_lock>>,
-<<__env_unlock>>, <<__env_unlock>>.  Any implementation of these
-routines must be careful to avoid causing a thread to wait for a lock
-that it already holds.
-*/
-
-#include "envlock.h"
-
-
-void
-__env_lock (ptr)
-     struct _reent *ptr;
-{
-}
-
-void
-__env_unlock (ptr)
-     struct _reent *ptr;
-{
-}
diff --git a/newlib/libc/stdlib/envlock.h b/newlib/libc/stdlib/envlock.h
deleted file mode 100644
index 9bb6a813e..000000000
--- a/newlib/libc/stdlib/envlock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* envlock.h -- header file for env routines.  */
-
-#ifndef _INCLUDE_ENVLOCK_H_
-#define _INCLUDE_ENVLOCK_H_
-
-#include <_ansi.h>
-#include <sys/reent.h>
-
-#define ENV_LOCK __env_lock(reent_ptr)
-#define ENV_UNLOCK __env_unlock(reent_ptr)
-
-void _EXFUN(__env_lock,(struct _reent *reent));
-void _EXFUN(__env_unlock,(struct _reent *reent));
-
-#endif /* _INCLUDE_ENVLOCK_H_ */
diff --git a/newlib/libc/stdlib/eprintf.c b/newlib/libc/stdlib/eprintf.c
deleted file mode 100644
index 46cf8104b..000000000
--- a/newlib/libc/stdlib/eprintf.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* This is an implementation of the __eprintf function which is
-   compatible with the assert.h which is distributed with gcc.
-
-   This function is provided because in some cases libgcc.a will not
-   provide __eprintf.  This will happen if inhibit_libc is defined,
-   which is done because at the time that libgcc2.c is compiled, the
-   correct <stdio.h> may not be available.  newlib provides its own
-   copy of assert.h, which calls __assert, not __eprintf.  However, in
-   some cases you may accidentally wind up compiling with the gcc
-   assert.h.  In such a case, this __eprintf will be used if there
-   does not happen to be one in libgcc2.c.  */
-
-#include <stdlib.h>
-#include <stdio.h>
-
-void
-__eprintf (format, file, line, expression)
-     const char *format;
-     const char *file;
-     unsigned int line;
-     const char *expression;
-{
-  (void) fiprintf (stderr, format, file, line, expression);
-  abort ();
-  /*NOTREACHED*/
-}
diff --git a/newlib/libc/stdlib/erand48.c b/newlib/libc/stdlib/erand48.c
deleted file mode 100644
index 26b39fb5b..000000000
--- a/newlib/libc/stdlib/erand48.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-double
-_DEFUN (_erand48_r, (r, xseed),
-       struct _reent *r _AND
-       unsigned short xseed[3])
-{
-  __dorand48(r, xseed);
-  return ldexp((double) xseed[0], -48) +
-    ldexp((double) xseed[1], -32) +
-    ldexp((double) xseed[2], -16);
-}
-
-#ifndef _REENT_ONLY
-double
-_DEFUN (erand48, (xseed),
-       unsigned short xseed[3])
-{
-  return _erand48_r (_REENT, xseed);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/exit.c b/newlib/libc/stdlib/exit.c
deleted file mode 100644
index be96488c8..000000000
--- a/newlib/libc/stdlib/exit.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * %sccs.include.redist.c%
- */
-
-/*
-FUNCTION
-<<exit>>---end program execution
-
-INDEX
-	exit
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void exit(int <[code]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	void exit(<[code]>)
-	int <[code]>;
-
-DESCRIPTION
-Use <<exit>> to return control from a program to the host operating
-environment.  Use the argument <[code]> to pass an exit status to the
-operating environment: two particular values, <<EXIT_SUCCESS>> and
-<<EXIT_FAILURE>>, are defined in `<<stdlib.h>>' to indicate success or
-failure in a portable fashion.
-
-<<exit>> does two kinds of cleanup before ending execution of your
-program.  First, it calls all application-defined cleanup functions
-you have enrolled with <<atexit>>.  Second, files and streams are
-cleaned up: any pending output is delivered to the host system, each
-open file or stream is closed, and files created by <<tmpfile>> are
-deleted.
-
-RETURNS
-<<exit>> does not return to its caller.
-
-PORTABILITY
-ANSI C requires <<exit>>, and specifies that <<EXIT_SUCCESS>> and
-<<EXIT_FAILURE>> must be defined.
-
-Supporting OS subroutines required: <<_exit>>.
-*/
-
-#include <stdlib.h>
-#include <unistd.h>	/* for _exit() declaration */
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-/*
- * Exit, flushing stdio buffers if necessary.
- */
-
-void 
-_DEFUN (exit, (code),
-	int code)
-{
-  register struct _atexit *p;
-  register struct _on_exit_args * args;
-  register int n;
-  int i;
-
-#ifdef _REENT_SMALL
-  p = &_GLOBAL_REENT->_atexit;
-  args = p->_on_exit_args_ptr;
-  
-  if (args == NULL)
-    {
-      for (n = p->_ind; n--;)
-        p->_fns[n] ();
-    }
-  else
-    {
-      for (n = p->_ind - 1, i = (n >= 0) ? (1 << n) : 0; n >= 0; --n, i >>= 1)
-        if (args->_fntypes & i)
-          (*((void (*)(int, void *)) p->_fns[n]))(code, args->_fnargs[n]);
-        else
-          p->_fns[n] ();
-    }
-#else
-  p = _GLOBAL_REENT->_atexit;
-  while (p)
-    {
-      args = & p->_on_exit_args;
-  
-      for (n = p->_ind - 1, i = (n >= 0) ? (1 << n) : 0; n >= 0; --n, i >>= 1)
-        if (args->_fntypes & i)
-          (*((void (*)(int, void *)) p->_fns[n]))(code, args->_fnargs[n]);
-        else
-          p->_fns[n] ();
-
-      p = p->_next;
-    }
-#endif
-
-  if (_GLOBAL_REENT->__cleanup)
-    (*_GLOBAL_REENT->__cleanup) (_GLOBAL_REENT);
-  _exit (code);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/getenv.c b/newlib/libc/stdlib/getenv.c
deleted file mode 100644
index 6e0151461..000000000
--- a/newlib/libc/stdlib/getenv.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-FUNCTION
-<<getenv>>---look up environment variable
-
-INDEX
-	getenv
-INDEX
-	environ
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	char *getenv(const char *<[name]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *getenv(<[name]>)
-	char *<[name]>;
-
-DESCRIPTION
-<<getenv>> searches the list of environment variable names and values
-(using the global pointer ``<<char **environ>>'') for a variable whose
-name matches the string at <[name]>.  If a variable name matches,
-<<getenv>> returns a pointer to the associated value.
-
-RETURNS
-A pointer to the (string) value of the environment variable, or
-<<NULL>> if there is no such environment variable.
-
-PORTABILITY
-<<getenv>> is ANSI, but the rules for properly forming names of environment
-variables vary from one system to another.
-
-<<getenv>> requires a global pointer <<environ>>.
-*/
-
-/*
- * Copyright (c) 1987, 2000 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <stddef.h>
-#include <string.h>
-
-/*
- * _findenv --
- *	Returns pointer to value associated with name, if any, else NULL.
- *	Sets offset to be the offset of the name/value combination in the
- *	environmental array, for use by setenv(3) and unsetenv(3).
- *	Explicitly removes '=' in argument name.
- *
- *	This routine *should* be a static; don't use it.
- */
-
-char *
-_DEFUN (_findenv, (name, offset),
-	register _CONST char *name _AND
-	int *offset)
-{
-  return _findenv_r (_REENT, name, offset);
-}
-
-/*
- * getenv --
- *	Returns ptr to value associated with name, if any, else NULL.
- */
-
-char *
-_DEFUN (getenv, (name),
-	_CONST char *name)
-{
-  int offset;
-  char *_findenv_r ();
-
-  return _findenv_r (_REENT, name, &offset);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/getenv_r.c b/newlib/libc/stdlib/getenv_r.c
deleted file mode 100644
index 85d250b79..000000000
--- a/newlib/libc/stdlib/getenv_r.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-FUNCTION
-<<_getenv_r>>---look up environment variable
-
-INDEX
-	_getenv_r
-INDEX
-	environ
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	char *_getenv_r(struct _reent *<[reent_ptr]>, const char *<[name]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *_getenv_r(<[reent_ptr]>, <[name]>)
-	struct _reent *<[reent_ptr]>;
-	char *<[name]>;
-
-DESCRIPTION
-<<_getenv_r>> searches the list of environment variable names and values
-(using the global pointer ``<<char **environ>>'') for a variable whose
-name matches the string at <[name]>.  If a variable name matches,
-<<_getenv_r>> returns a pointer to the associated value.
-
-RETURNS
-A pointer to the (string) value of the environment variable, or
-<<NULL>> if there is no such environment variable.
-
-PORTABILITY
-<<_getenv_r>> is not ANSI; the rules for properly forming names of environment
-variables vary from one system to another.
-
-<<_getenv_r>> requires a global pointer <<environ>>.
-*/
-
-/* This file may have been modified by DJ Delorie (Jan 1991).  If so,
-** these modifications are Copyright (C) 1991 DJ Delorie.
-*/
-
-/*
- * Copyright (c) 1987 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <stdlib.h>
-#include <stddef.h>
-#include <string.h>
-#include "envlock.h"
-
-extern char **environ;
-
-/* Only deal with a pointer to environ, to work around subtle bugs with shared
-   libraries and/or small data systems where the user declares his own
-   'environ'.  */
-static char ***p_environ = &environ;
-
-/*
- * _findenv --
- *	Returns pointer to value associated with name, if any, else NULL.
- *	Sets offset to be the offset of the name/value combination in the
- *	environmental array, for use by setenv(3) and unsetenv(3).
- *	Explicitly removes '=' in argument name.
- *
- *	This routine *should* be a static; don't use it.
- */
-
-char *
-_DEFUN (_findenv_r, (reent_ptr, name, offset),
-        struct _reent *reent_ptr   _AND
-	register _CONST char *name _AND
-	int *offset)
-{
-  register int len;
-  register char **p;
-  _CONST char *c;
-
-  ENV_LOCK;
-
-  /* In some embedded systems, this does not get set.  This protects
-     newlib from dereferencing a bad pointer.  */
-  if (!*p_environ)
-    {
-      ENV_UNLOCK;
-      return NULL;
-    }
-
-  c = name;
-  len = 0;
-  while (*c && *c != '=')
-    {
-      c++;
-      len++;
-    }
-
-  for (p = *p_environ; *p; ++p)
-    if (!strncmp (*p, name, len))
-      if (*(c = *p + len) == '=')
-	{
-	  *offset = p - *p_environ;
-          ENV_UNLOCK;
-	  return (char *) (++c);
-	}
-  ENV_UNLOCK;
-  return NULL;
-}
-
-/*
- * _getenv_r --
- *	Returns ptr to value associated with name, if any, else NULL.
- */
-
-char *
-_DEFUN (_getenv_r, (reent_ptr, name),
-        struct _reent *reent_ptr _AND
-	_CONST char *name)
-{
-  int offset;
-  char *_findenv_r ();
-
-  return _findenv_r (reent_ptr, name, &offset);
-}
diff --git a/newlib/libc/stdlib/getopt.c b/newlib/libc/stdlib/getopt.c
deleted file mode 100644
index b38938d5f..000000000
--- a/newlib/libc/stdlib/getopt.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (c) 1987, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-/* static char sccsid[] = "from: @(#)getopt.c	8.2 (Berkeley) 4/2/94"; */
-static char *rcsid = "$Id$";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-int	opterr = 1,		/* if error message should be printed */
-	optind = 1,		/* index into parent argv vector */
-	optopt,			/* character checked for validity */
-	optreset;		/* reset getopt */
-char	*optarg;		/* argument associated with option */
-
-#define	BADCH	(int)'?'
-#define	BADARG	(int)':'
-#define	EMSG	""
-
-/*
- * getopt --
- *	Parse argc/argv argument vector.
- */
-int
-getopt(nargc, nargv, ostr)
-	int nargc;
-	char * const *nargv;
-	const char *ostr;
-{
-	static char *place = EMSG;		/* option letter processing */
-	char *oli;				/* option letter list index */
-
-	if (optreset || !*place) {		/* update scanning pointer */
-		optreset = 0;
-		if (optind >= nargc || *(place = nargv[optind]) != '-') {
-			place = EMSG;
-			return (-1);
-		}
-		if (place[1] && *++place == '-') {	/* found "--" */
-			++optind;
-			place = EMSG;
-			return (-1);
-		}
-	}					/* option letter okay? */
-	if ((optopt = (int)*place++) == (int)':' ||
-	    !(oli = strchr(ostr, optopt))) {
-		/*
-		 * if the user didn't specify '-' as an option,
-		 * assume it means -1.
-		 */
-		if (optopt == (int)'-')
-			return (-1);
-		if (!*place)
-			++optind;
-		if (opterr && *ostr != ':')
-			(void)fprintf(stderr,
-			    "%s: illegal option -- %c\n", nargv[0], optopt);
-		return (BADCH);
-	}
-	if (*++oli != ':') {			/* don't need argument */
-		optarg = NULL;
-		if (!*place)
-			++optind;
-	}
-	else {					/* need an argument */
-		if (*place)			/* no white space */
-			optarg = place;
-		else if (nargc <= ++optind) {	/* no arg */
-			place = EMSG;
-			if (*ostr == ':')
-				return (BADARG);
-			if (opterr)
-				(void)fprintf(stderr,
-				    "%s: option requires an argument -- %c\n",
-				    nargv[0], optopt);
-			return (BADCH);
-		}
-	 	else				/* white space */
-			optarg = nargv[optind];
-		place = EMSG;
-		++optind;
-	}
-	return (optopt);			/* dump back option letter */
-}
diff --git a/newlib/libc/stdlib/getsubopt.3 b/newlib/libc/stdlib/getsubopt.3
deleted file mode 100644
index 83c5f7c6b..000000000
--- a/newlib/libc/stdlib/getsubopt.3
+++ /dev/null
@@ -1,149 +0,0 @@
-.\" Copyright (c) 1990, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)getsubopt.3	8.1 (Berkeley) 6/9/93
-.\" $FreeBSD: src/lib/libc/stdlib/getsubopt.3,v 1.9 2001/09/07 14:46:35 asmodai Exp $
-.\"
-.Dd June 9, 1993
-.Dt GETSUBOPT 3
-.Os
-.Sh NAME
-.Nm getsubopt
-.Nd get sub options from an argument
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In unistd.h
-.Vt extern char *suboptarg ;
-.Ft int
-.Fn getsubopt "char **optionp" "char * const *tokens" "char **valuep"
-.Sh DESCRIPTION
-The
-.Fn getsubopt
-function
-parses a string containing tokens delimited by one or more tab, space or
-comma
-.Pq Ql \&,
-characters.
-It is intended for use in parsing groups of option arguments provided
-as part of a utility command line.
-.Pp
-The argument
-.Fa optionp
-is a pointer to a pointer to the string.
-The argument
-.Fa tokens
-is a pointer to a
-.Dv NULL Ns -terminated
-array of pointers to strings.
-.Pp
-The
-.Fn getsubopt
-function
-returns the zero-based offset of the pointer in the
-.Fa tokens
-array referencing a string which matches the first token
-in the string, or, \-1 if the string contains no tokens or
-.Fa tokens
-does not contain a matching string.
-.Pp
-If the token is of the form ``name=value'', the location referenced by
-.Fa valuep
-will be set to point to the start of the ``value'' portion of the token.
-.Pp
-On return from
-.Fn getsubopt ,
-.Fa optionp
-will be set to point to the start of the next token in the string,
-or the null at the end of the string if no more tokens are present.
-The external variable
-.Fa suboptarg
-will be set to point to the start of the current token, or
-.Dv NULL
-if no
-tokens were present.
-The argument
-.Fa valuep
-will be set to point to the ``value'' portion of the token, or
-.Dv NULL
-if no ``value'' portion was present.
-.Sh EXAMPLES
-.Bd -literal -compact
-char *tokens[] = {
-	#define	ONE	0
-		"one",
-	#define	TWO	1
-		"two",
-	NULL
-};
-
-\&...
-
-extern char *optarg, *suboptarg;
-char *options, *value;
-
-while ((ch = getopt(argc, argv, "ab:")) != \-1) {
-	switch(ch) {
-	case 'a':
-		/* process ``a'' option */
-		break;
-	case 'b':
-		options = optarg;
-		while (*options) {
-			switch(getsubopt(&options, tokens, &value)) {
-			case ONE:
-				/* process ``one'' sub option */
-				break;
-			case TWO:
-				/* process ``two'' sub option */
-				if (!value)
-					error("no value for two");
-				i = atoi(value);
-				break;
-			case \-1:
-				if (suboptarg)
-					error("illegal sub option %s",
-					  suboptarg);
-				else
-					error("missing sub option");
-				break;
-		}
-		break;
-	}
-.Ed
-.Sh SEE ALSO
-.Xr getopt 3 ,
-.Xr strsep 3
-.Sh HISTORY
-The
-.Fn getsubopt
-function first appeared in
-.Bx 4.4 .
diff --git a/newlib/libc/stdlib/getsubopt.c b/newlib/libc/stdlib/getsubopt.c
deleted file mode 100644
index 250e73d2c..000000000
--- a/newlib/libc/stdlib/getsubopt.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getsubopt.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*
- * The SVID interface to getsubopt provides no way of figuring out which
- * part of the suboptions list wasn't matched.  This makes error messages
- * tricky...  The extern variable suboptarg is a pointer to the token
- * which didn't match.
- */
-char *suboptarg;
-
-int
-getsubopt(optionp, tokens, valuep)
-	char **optionp, **valuep;
-	char * const *tokens;
-{
-	int cnt;
-	char *p;
-
-	suboptarg = *valuep = NULL;
-
-	if (!optionp || !*optionp)
-		return(-1);
-
-	/* skip leading white-space, commas */
-	for (p = *optionp; *p && (*p == ',' || *p == ' ' || *p == '\t'); ++p);
-
-	if (!*p) {
-		*optionp = p;
-		return(-1);
-	}
-
-	/* save the start of the token, and skip the rest of the token. */
-	for (suboptarg = p;
-	    *++p && *p != ',' && *p != '=' && *p != ' ' && *p != '\t';);
-
-	if (*p) {
-		/*
-		 * If there's an equals sign, set the value pointer, and
-		 * skip over the value part of the token.  Terminate the
-		 * token.
-		 */
-		if (*p == '=') {
-			*p = '\0';
-			for (*valuep = ++p;
-			    *p && *p != ',' && *p != ' ' && *p != '\t'; ++p);
-			if (*p)
-				*p++ = '\0';
-		} else
-			*p++ = '\0';
-		/* Skip any whitespace or commas after this token. */
-		for (; *p && (*p == ',' || *p == ' ' || *p == '\t'); ++p);
-	}
-
-	/* set optionp for next round. */
-	*optionp = p;
-
-	for (cnt = 0; *tokens; ++tokens, ++cnt)
-		if (!strcmp(suboptarg, *tokens))
-			return(cnt);
-	return(-1);
-}
diff --git a/newlib/libc/stdlib/jrand48.c b/newlib/libc/stdlib/jrand48.c
deleted file mode 100644
index 9e2f92cb6..000000000
--- a/newlib/libc/stdlib/jrand48.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-long
-_DEFUN (_jrand48_r, (r, xseed),
-       struct _reent *r _AND
-       unsigned short xseed[3])
-{
-  __dorand48(r, xseed);
-  return ((long) xseed[2] << 16) + (long) xseed[1];
-}
-
-#ifndef _REENT_ONLY
-long
-_DEFUN (jrand48, (xseed),
-       unsigned short xseed[3])
-{
-  return _jrand48_r (_REENT, xseed);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/l64a.c b/newlib/libc/stdlib/l64a.c
deleted file mode 100644
index d415d0478..000000000
--- a/newlib/libc/stdlib/l64a.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* l64a - convert long to radix-64 ascii string
- *          
- * Conversion is performed on at most 32-bits of input value starting 
- * from least significant bits to the most significant bits.
- *
- * The routine splits the input value into groups of 6 bits for up to 
- * 32 bits of input.  This means that the last group may be 2 bits 
- * (bits 30 and 31).
- * 
- * Each group of 6 bits forms a value from 0-63 which is converted into 
- * a character as follows:
- *         0 = '.'
- *         1 = '/'
- *         2-11 = '0' to '9'
- *        12-37 = 'A' to 'Z'
- *        38-63 = 'a' to 'z'
- *
- * When the remaining bits are zero or all 32 bits have been translated, 
- * a nul terminator is appended to the resulting string.  An input value of 
- * 0 results in an empty string.
- */
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <reent.h>
-
-static const char R64_ARRAY[] = "./0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz";
-
-char *
-_DEFUN (l64a, (value),
-     long value)
-{
-  return _l64a_r (_REENT, value);
-}
-
-char *
-_DEFUN (_l64a_r, (rptr, value),
-     struct _reent *rptr _AND
-     long value)
-{
-  char *ptr;
-  char *result;
-  int i, index;
-  unsigned long tmp = (unsigned long)value & 0xffffffff;
-
-  _REENT_CHECK_MISC(rptr);
-  result = _REENT_L64A_BUF(rptr);
-  ptr = result;
-
-  for (i = 0; i < 6; ++i)
-    {
-      if (tmp == 0)
-	{
-	  *ptr = '\0';
-	  break;
-	}
-
-      index = tmp & (64 - 1);
-      *ptr++ = R64_ARRAY[index];
-      tmp >>= 6;
-    }
-
-  return result;
-}
diff --git a/newlib/libc/stdlib/labs.c b/newlib/libc/stdlib/labs.c
deleted file mode 100644
index 634cf7348..000000000
--- a/newlib/libc/stdlib/labs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
-FUNCTION
-<<labs>>---long integer absolute value
-
-INDEX
-	labs
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	long labs(long <[i]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	long labs(<[i]>)
-	long <[i]>;
-
-DESCRIPTION
-<<labs>> returns
-@tex
-$|x|$,
-@end tex
-the absolute value of <[i]> (also called the magnitude
-of <[i]>).  That is, if <[i]> is negative, the result is the opposite
-of <[i]>, but if <[i]> is nonnegative the result is <[i]>.
-
-The similar function <<abs>> uses and returns <<int>> rather than
-<<long>> values.
-
-RETURNS
-The result is a nonnegative long integer.
-
-PORTABILITY
-<<labs>> is ANSI.
-
-No supporting OS subroutine calls are required.
-*/
-
-#include <stdlib.h>
-
-long
-_DEFUN (labs, (x),
-	long x)
-{
-  if (x < 0)
-    {
-      x = -x;
-    }
-  return x;
-}
diff --git a/newlib/libc/stdlib/lcong48.c b/newlib/libc/stdlib/lcong48.c
deleted file mode 100644
index 548f32757..000000000
--- a/newlib/libc/stdlib/lcong48.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-_VOID
-_DEFUN (_lcong48_r, (r, p),
-       struct _reent *r _AND
-       unsigned short p[7])
-{
-  _REENT_CHECK_RAND48(r);
-  __rand48_seed[0] = p[0];
-  __rand48_seed[1] = p[1];
-  __rand48_seed[2] = p[2];
-  __rand48_mult[0] = p[3];
-  __rand48_mult[1] = p[4];
-  __rand48_mult[2] = p[5];
-  __rand48_add = p[6];
-}
-
-#ifndef _REENT_ONLY
-_VOID
-_DEFUN (lcong48, (p),
-       unsigned short p[7])
-{
-  _lcong48_r (_REENT, p);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/ldiv.c b/newlib/libc/stdlib/ldiv.c
deleted file mode 100644
index d7508f1c5..000000000
--- a/newlib/libc/stdlib/ldiv.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-FUNCTION
-<<ldiv>>---divide two long integers
-
-INDEX
-	ldiv
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	ldiv_t ldiv(long <[n]>, long <[d]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	ldiv_t ldiv(<[n]>, <[d]>)
-	long <[n]>, <[d]>;
-
-DESCRIPTION
-Divide
-@tex
-$n/d$,
-@end tex
-@ifnottex
-<[n]>/<[d]>,
-@end ifnottex
-returning quotient and remainder as two long integers in a structure <<ldiv_t>>.
-
-RETURNS
-The result is represented with the structure
-
-. typedef struct
-. {
-.  long quot;
-.  long rem;
-. } ldiv_t;
-
-where the <<quot>> field represents the quotient, and <<rem>> the
-remainder.  For nonzero <[d]>, if `<<<[r]> = ldiv(<[n]>,<[d]>);>>' then
-<[n]> equals `<<<[r]>.rem + <[d]>*<[r]>.quot>>'.
-
-To divide <<int>> rather than <<long>> values, use the similar
-function <<div>>.
-
-PORTABILITY
-<<ldiv>> is ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Chris Torek.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <stdlib.h>		/* ldiv_t */
-
-ldiv_t
-_DEFUN (ldiv, (num, denom),
-        long num _AND
-        long denom)
-{
-	ldiv_t r;
-
-	/* see div.c for comments */
-
-	r.quot = num / denom;
-	r.rem = num % denom;
-	if (num >= 0 && r.rem < 0) {
-		++r.quot;
-		r.rem -= denom;
-	}
-	else if (num < 0 && r.rem > 0) {
-		--r.quot;
-		r.rem += denom;
-	}
-	return (r);
-}
diff --git a/newlib/libc/stdlib/ldtoa.c b/newlib/libc/stdlib/ldtoa.c
deleted file mode 100644
index 7af35d5e8..000000000
--- a/newlib/libc/stdlib/ldtoa.c
+++ /dev/null
@@ -1,3739 +0,0 @@
-
- /* Extended precision arithmetic functions for long double I/O.
-  * This program has been placed in the public domain.
-  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <string.h>
-#include <stdlib.h>
-#include "mprec.h"
-
-/* These are the externally visible entries. */
-/* linux name:  long double _IO_strtold (char *, char **); */
-long double _strtold (char *, char **);
-char * _ldtoa_r (struct _reent *, long double, int, int, int *, int *, char **);
-int    _ldcheck (long double *);
-#if 0
-void _IO_ldtostr(long double *, char *, int, int, char);
-#endif
-
- /* Number of 16 bit words in external x type format */
- #define NE 10
-
- /* Number of 16 bit words in internal format */
- #define NI (NE+3)
-
- /* Array offset to exponent */
- #define E 1
-
- /* Array offset to high guard word */
- #define M 2
-
- /* Number of bits of precision */
- #define NBITS ((NI-4)*16)
-
- /* Maximum number of decimal digits in ASCII conversion
-  * = NBITS*log10(2)
-  */
- #define NDEC (NBITS*8/27)
-
- /* The exponent of 1.0 */
- #define EXONE (0x3fff)
-
- /* Maximum exponent digits - base 10 */
- #define MAX_EXP_DIGITS 5
-
-/* Control structure for long double conversion including rounding precision values.
- * rndprc can be set to 80 (if NE=6), 64, 56, 53, or 24 bits.
- */
-typedef struct
-{
-  int rlast;
-  int rndprc;
-  int rw;
-  int re;
-  int outexpon;
-  unsigned short rmsk;
-  unsigned short rmbit;
-  unsigned short rebit;
-  unsigned short rbit[NI];
-  unsigned short equot[NI];
-} LDPARMS;
-
-static void esub(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static void emul(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static void ediv(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp);
-static int ecmp(short unsigned int *a, short unsigned int *b);
-static int enormlz(short unsigned int *x);
-static int eshift(short unsigned int *x, int sc);
-static void eshup1(register short unsigned int *x);
-static void eshup8(register short unsigned int *x);
-static void eshup6(register short unsigned int *x);
-static void eshdn1(register short unsigned int *x);
-static void eshdn8(register short unsigned int *x);
-static void eshdn6(register short unsigned int *x);
-static void eneg(short unsigned int *x);
-static void emov(register short unsigned int *a, register short unsigned int *b);
-static void eclear(register short unsigned int *x);
-static void einfin(register short unsigned int *x, register LDPARMS *ldp);
-static void efloor(short unsigned int *x, short unsigned int *y, LDPARMS *ldp);
-static void etoasc(short unsigned int *x, char *string, int ndigs, int outformat, LDPARMS *ldp);
-
-#if LDBL_MANT_DIG == 24
-static void e24toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#elif LDBL_MANT_DIG == 53
-static void e53toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#elif LDBL_MANT_DIG == 64
-static void e64toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#else
-static void e113toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp);
-#endif
-
-/*							econst.c	*/
-/*  e type constants used by high precision check routines */
-
-#if NE == 10
-/* 0.0 */
-static unsigned short ezero[NE] =
- {0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,};
-
-/* 1.0E0 */
-static unsigned short eone[NE] =
- {0x0000, 0x0000, 0x0000, 0x0000,
-  0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x3fff,};
-
-#else
-
-/* 0.0 */
-static unsigned short ezero[NE] = {
-0, 0000000,0000000,0000000,0000000,0000000,};
-/* 1.0E0 */
-static unsigned short eone[NE] = {
-0, 0000000,0000000,0000000,0100000,0x3fff,};
-
-#endif
-
-/* Debugging routine for displaying errors */
-#ifdef DEBUG
-/* Notice: the order of appearance of the following
- * messages is bound to the error codes defined
- * in mconf.h.
- */
-static char *ermsg[7] = {
-"unknown",      /* error code 0 */
-"domain",       /* error code 1 */
-"singularity",  /* et seq.      */
-"overflow",
-"underflow",
-"total loss of precision",
-"partial loss of precision"
-};
-#define mtherr(name, code) printf( "\n%s %s error\n", name, ermsg[code] );
-#else
-#define mtherr(name, code)
-#endif
-
-/*							ieee.c
- *
- *    Extended precision IEEE binary floating point arithmetic routines
- *
- * Numbers are stored in C language as arrays of 16-bit unsigned
- * short integers.  The arguments of the routines are pointers to
- * the arrays.
- *
- *
- * External e type data structure, simulates Intel 8087 chip
- * temporary real format but possibly with a larger significand:
- *
- *	NE-1 significand words	(least significant word first,
- *				 most significant bit is normally set)
- *	exponent		(value = EXONE for 1.0,
- *				top bit is the sign)
- *
- *
- * Internal data structure of a number (a "word" is 16 bits):
- *
- * ei[0]	sign word	(0 for positive, 0xffff for negative)
- * ei[1]	biased exponent	(value = EXONE for the number 1.0)
- * ei[2]	high guard word	(always zero after normalization)
- * ei[3]
- * to ei[NI-2]	significand	(NI-4 significand words,
- *				 most significant word first,
- *				 most significant bit is set)
- * ei[NI-1]	low guard word	(0x8000 bit is rounding place)
- *
- *
- *
- *		Routines for external format numbers
- *
- *	asctoe( string, e )	ASCII string to extended double e type
- *	asctoe64( string, &d )	ASCII string to long double
- *	asctoe53( string, &d )	ASCII string to double
- *	asctoe24( string, &f )	ASCII string to single
- *	asctoeg( string, e, prec, ldp ) ASCII string to specified precision
- *	e24toe( &f, e, ldp )	IEEE single precision to e type
- *	e53toe( &d, e, ldp )	IEEE double precision to e type
- *	e64toe( &d, e, ldp )	IEEE long double precision to e type
- *	e113toe( &d, e, ldp )	IEEE long double precision to e type
- *	eabs(e)			absolute value
- *	eadd( a, b, c )		c = b + a
- *	eclear(e)		e = 0
- *	ecmp (a, b)		Returns 1 if a > b, 0 if a == b,
- *				-1 if a < b, -2 if either a or b is a NaN.
- *	ediv( a, b, c, ldp )	c = b / a
- *	efloor( a, b, ldp )	truncate to integer, toward -infinity
- *	efrexp( a, exp, s )	extract exponent and significand
- *	eifrac( e, &l, frac )   e to long integer and e type fraction
- *	euifrac( e, &l, frac )  e to unsigned long integer and e type fraction
- *	einfin( e, ldp )	set e to infinity, leaving its sign alone
- *	eldexp( a, n, b )	multiply by 2**n
- *	emov( a, b )		b = a
- *	emul( a, b, c, ldp )	c = b * a
- *	eneg(e)			e = -e
- *	eround( a, b )		b = nearest integer value to a
- *	esub( a, b, c, ldp )	c = b - a
- *	e24toasc( &f, str, n )	single to ASCII string, n digits after decimal
- *	e53toasc( &d, str, n )	double to ASCII string, n digits after decimal
- *	e64toasc( &d, str, n )	long double to ASCII string
- *	etoasc(e,str,n,fmt,ldp)e to ASCII string, n digits after decimal
- *	etoe24( e, &f )		convert e type to IEEE single precision
- *	etoe53( e, &d )		convert e type to IEEE double precision
- *	etoe64( e, &d )		convert e type to IEEE long double precision
- *	ltoe( &l, e )		long (32 bit) integer to e type
- *	ultoe( &l, e )		unsigned long (32 bit) integer to e type
- *      eisneg( e )             1 if sign bit of e != 0, else 0
- *      eisinf( e )             1 if e has maximum exponent (non-IEEE)
- *				or is infinite (IEEE)
- *      eisnan( e )             1 if e is a NaN
- *	esqrt( a, b )		b = square root of a
- *
- *
- *		Routines for internal format numbers
- *
- *	eaddm( ai, bi )		add significands, bi = bi + ai
- *	ecleaz(ei)		ei = 0
- *	ecleazs(ei)		set ei = 0 but leave its sign alone
- *	ecmpm( ai, bi )		compare significands, return 1, 0, or -1
- *	edivm( ai, bi, ldp )	divide  significands, bi = bi / ai
- *	emdnorm(ai,l,s,exp,ldp) normalize and round off
- *	emovi( a, ai )		convert external a to internal ai
- *	emovo( ai, a, ldp )	convert internal ai to external a
- *	emovz( ai, bi )		bi = ai, low guard word of bi = 0
- *	emulm( ai, bi, ldp )	multiply significands, bi = bi * ai
- *	enormlz(ei)		left-justify the significand
- *	eshdn1( ai )		shift significand and guards down 1 bit
- *	eshdn8( ai )		shift down 8 bits
- *	eshdn6( ai )		shift down 16 bits
- *	eshift( ai, n )		shift ai n bits up (or down if n < 0)
- *	eshup1( ai )		shift significand and guards up 1 bit
- *	eshup8( ai )		shift up 8 bits
- *	eshup6( ai )		shift up 16 bits
- *	esubm( ai, bi )		subtract significands, bi = bi - ai
- *
- *
- * The result is always normalized and rounded to NI-4 word precision
- * after each arithmetic operation.
- *
- * Exception flags are NOT fully supported.
- *
- * Define INFINITY in mconf.h for support of infinity; otherwise a
- * saturation arithmetic is implemented.
- *
- * Define NANS for support of Not-a-Number items; otherwise the
- * arithmetic will never produce a NaN output, and might be confused
- * by a NaN input.
- * If NaN's are supported, the output of ecmp(a,b) is -2 if
- * either a or b is a NaN. This means asking if(ecmp(a,b) < 0)
- * may not be legitimate. Use if(ecmp(a,b) == -1) for less-than
- * if in doubt.
- * Signaling NaN's are NOT supported; they are treated the same
- * as quiet NaN's.
- *
- * Denormals are always supported here where appropriate (e.g., not
- * for conversion to DEC numbers).
- */
-
-/*
- * Revision history:
- *
- *  5 Jan 84	PDP-11 assembly language version
- *  6 Dec 86	C language version
- * 30 Aug 88	100 digit version, improved rounding
- * 15 May 92    80-bit long double support
- * 22 Nov 00    Revised to fit into newlib by Jeff Johnston <jjohnstn@redhat.com>
- *
- * Author:  S. L. Moshier.
- *
- * Copyright (c) 1984,2000 S.L. Moshier
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR,  THE AUTHOR MAKES NO REPRESENTATION
- * OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
- * SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- */
-
-#include <stdio.h>
-/* #include "\usr\include\stdio.h" */
-/*#include "ehead.h"*/
-/*#include "mconf.h"*/
-/*							mconf.h
- *
- *	Common include file for math routines
- *
- *
- *
- * SYNOPSIS:
- *
- * #include "mconf.h"
- *
- *
- *
- * DESCRIPTION:
- *
- * This file contains definitions for error codes that are
- * passed to the common error handling routine mtherr()
- * (which see).
- *
- * The file also includes a conditional assembly definition
- * for the type of computer arithmetic (IEEE, DEC, Motorola
- * IEEE, or UNKnown).
- *
- * For Digital Equipment PDP-11 and VAX computers, certain
- * IBM systems, and others that use numbers with a 56-bit
- * significand, the symbol DEC should be defined.  In this
- * mode, most floating point constants are given as arrays
- * of octal integers to eliminate decimal to binary conversion
- * errors that might be introduced by the compiler.
- *
- * For computers, such as IBM PC, that follow the IEEE 
- * Standard for Binary Floating Point Arithmetic (ANSI/IEEE
- * Std 754-1985), the symbol IBMPC should be defined.  These
- * numbers have 53-bit significands.  In this mode, constants
- * are provided as arrays of hexadecimal 16 bit integers.
- *
- * To accommodate other types of computer arithmetic, all
- * constants are also provided in a normal decimal radix
- * which one can hope are correctly converted to a suitable
- * format by the available C language compiler.  To invoke
- * this mode, the symbol UNK is defined.
- *
- * An important difference among these modes is a predefined
- * set of machine arithmetic constants for each.  The numbers
- * MACHEP (the machine roundoff error), MAXNUM (largest number
- * represented), and several other parameters are preset by
- * the configuration symbol.  Check the file const.c to
- * ensure that these values are correct for your computer.
- *
- * For ANSI C compatibility, define ANSIC equal to 1.  Currently
- * this affects only the atan2() function and others that use it.
- */
-
-/* Constant definitions for math error conditions
- */
-
-#define DOMAIN		1	/* argument domain error */
-#define SING		2	/* argument singularity */
-#define OVERFLOW	3	/* overflow range error */
-#define UNDERFLOW	4	/* underflow range error */
-#define TLOSS		5	/* total loss of precision */
-#define PLOSS		6	/* partial loss of precision */
-
-#define EDOM		33
-#define ERANGE		34
-
-typedef struct
-	{
-	double r;
-	double i;
-	}cmplx;
-
-/* Type of computer arithmetic */
-
-#ifndef DEC
-#ifdef __IEEE_LITTLE_ENDIAN
-#define IBMPC 1
-#else  /* !__IEEE_LITTLE_ENDIAN */
-#define MIEEE 1
-#endif /* !__IEEE_LITTLE_ENDIAN */
-#endif /* !DEC */
-
-/* Define 1 for ANSI C atan2() function
- * See atan.c and clog.c.
- */
-#define ANSIC 1
-
-/*define VOLATILE volatile*/
-#define VOLATILE 
-
-#define NANS
-#define INFINITY
-
-/* NaN's require infinity support. */
-#ifdef NANS
-#ifndef INFINITY
-#define INFINITY
-#endif
-#endif
-
-/* This handles 64-bit long ints. */
-#define LONGBITS (8 * sizeof(long))
-
-
-static void eaddm(short unsigned int *x, short unsigned int *y);
-static void esubm(short unsigned int *x, short unsigned int *y);
-static void emdnorm(short unsigned int *s, int lost, int subflg, long int exp, int rcntrl, LDPARMS *ldp);
-static int  asctoeg(char *ss, short unsigned int *y, int oprec, LDPARMS *ldp);
-static void enan(short unsigned int *nan, int size);
-#if LDBL_MANT_DIG == 24
-static void toe24(short unsigned int *x, short unsigned int *y);
-#elif LDBL_MANT_DIG == 53
-static void toe53(short unsigned int *x, short unsigned int *y);
-#elif LDBL_MANT_DIG == 64
-static void toe64(short unsigned int *a, short unsigned int *b);
-#else
-static void toe113(short unsigned int *a, short unsigned int *b);
-#endif
-static void eiremain(short unsigned int *den, short unsigned int *num, LDPARMS *ldp);
-static int ecmpm(register short unsigned int *a, register short unsigned int *b);
-static int edivm(short unsigned int *den, short unsigned int *num, LDPARMS *ldp);
-static int emulm(short unsigned int *a, short unsigned int *b, LDPARMS *ldp);
-static int eisneg(short unsigned int *x);
-static int eisinf(short unsigned int *x);
-static void emovi(short unsigned int *a, short unsigned int *b);
-static void emovo(short unsigned int *a, short unsigned int *b, LDPARMS *ldp);
-static void emovz(register short unsigned int *a, register short unsigned int *b);
-static void ecleaz(register short unsigned int *xi);
-static void eadd1(short unsigned int *a, short unsigned int *b, short unsigned int *c, int subflg, LDPARMS *ldp);
-static int eisnan(short unsigned int *x);
-static int eiisnan(short unsigned int *x);
-
-#ifdef DEC
-static void etodec(), todec(), dectoe();
-#endif
-
-/*
-; Clear out entire external format number.
-;
-; unsigned short x[];
-; eclear( x );
-*/
-
-static void eclear(register short unsigned int *x)
-{
-register int i;
-
-for( i=0; i<NE; i++ )
-	*x++ = 0;
-}
-
-
-
-/* Move external format number from a to b.
- *
- * emov( a, b );
- */
-
-static void emov(register short unsigned int *a, register short unsigned int *b)
-{
-register int i;
-
-for( i=0; i<NE; i++ )
-	*b++ = *a++;
-}
-
-
-/*
-;	Negate external format number
-;
-;	unsigned short x[NE];
-;	eneg( x );
-*/
-
-static void eneg(short unsigned int *x)
-{
-
-#ifdef NANS
-if( eisnan(x) )
-	return;
-#endif
-x[NE-1] ^= 0x8000; /* Toggle the sign bit */
-}
-
-
-
-/* Return 1 if external format number is negative,
- * else return zero.
- */
-static int eisneg(short unsigned int *x)
-{
-
-#ifdef NANS
-if( eisnan(x) )
-	return( 0 );
-#endif
-if( x[NE-1] & 0x8000 )
-	return( 1 );
-else
-	return( 0 );
-}
-
-
-/* Return 1 if external format number has maximum possible exponent,
- * else return zero.
- */
-static int eisinf(short unsigned int *x)
-{
-
-if( (x[NE-1] & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(x) )
-		return( 0 );
-#endif
-	return( 1 );
-	}
-else
-	return( 0 );
-}
-
-/* Check if e-type number is not a number.
- */
-static int eisnan(short unsigned int *x)
-{
-
-#ifdef NANS
-int i;
-/* NaN has maximum exponent */
-if( (x[NE-1] & 0x7fff) != 0x7fff )
-	return (0);
-/* ... and non-zero significand field. */
-for( i=0; i<NE-1; i++ )
-	{
-	if( *x++ != 0 )
-		return (1);
-	}
-#endif
-return (0);
-}
-
-/*
-; Fill entire number, including exponent and significand, with
-; largest possible number.  These programs implement a saturation
-; value that is an ordinary, legal number.  A special value
-; "infinity" may also be implemented; this would require tests
-; for that value and implementation of special rules for arithmetic
-; operations involving inifinity.
-*/
-
-static void einfin(register short unsigned int *x, register LDPARMS *ldp)
-{
-register int i;
-
-#ifdef INFINITY
-for( i=0; i<NE-1; i++ )
-	*x++ = 0;
-*x |= 32767;
-ldp = ldp;
-#else
-for( i=0; i<NE-1; i++ )
-	*x++ = 0xffff;
-*x |= 32766;
-if( ldp->rndprc < NBITS )
-	{
-	if (ldp->rndprc == 113)
-		{
-		*(x - 9) = 0;
-		*(x - 8) = 0;
-		}
-	if( ldp->rndprc == 64 )
-		{
-		*(x-5) = 0;
-		}
-	if( ldp->rndprc == 53 )
-		{
-		*(x-4) = 0xf800;
-		}
-	else
-		{
-		*(x-4) = 0;
-		*(x-3) = 0;
-		*(x-2) = 0xff00;
-		}
-	}
-#endif
-}
-
-/* Move in external format number,
- * converting it to internal format.
- */
-static void emovi(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-int i;
-
-q = b;
-p = a + (NE-1);	/* point to last word of external number */
-/* get the sign bit */
-if( *p & 0x8000 )
-	*q++ = 0xffff;
-else
-	*q++ = 0;
-/* get the exponent */
-*q = *p--;
-*q++ &= 0x7fff;	/* delete the sign bit */
-#ifdef INFINITY
-if( (*(q-1) & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(a) )
-		{
-		*q++ = 0;
-		for( i=3; i<NI; i++ )
-			*q++ = *p--;
-		return;
-		}
-#endif
-	for( i=2; i<NI; i++ )
-		*q++ = 0;
-	return;
-	}
-#endif
-/* clear high guard word */
-*q++ = 0;
-/* move in the significand */
-for( i=0; i<NE-1; i++ )
-	*q++ = *p--;
-/* clear low guard word */
-*q = 0;
-}
-
-
-/* Move internal format number out,
- * converting it to external format.
- */
-static void emovo(short unsigned int *a, short unsigned int *b, LDPARMS *ldp)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-p = a;
-q = b + (NE-1); /* point to output exponent */
-/* combine sign and exponent */
-i = *p++;
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#ifdef INFINITY
-if( *(p-1) == 0x7fff )
-	{
-#ifdef NANS
-	if( eiisnan(a) )
-		{
-		enan( b, NBITS );
-		return;
-		}
-#endif
-	einfin(b, ldp);
-	return;
-	}
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-for( i=0; i<NE-1; i++ )
-	*q-- = *p++;
-}
-
-
-/* Clear out internal format number.
- */
-
-static void ecleaz(register short unsigned int *xi)
-{
-register int i;
-
-for( i=0; i<NI; i++ )
-	*xi++ = 0;
-}
-
-/* same, but don't touch the sign. */
-
-static void ecleazs(register short unsigned int *xi)
-{
-register int i;
-
-++xi;
-for(i=0; i<NI-1; i++)
-	*xi++ = 0;
-}
-
-
-
-
-/* Move internal format number from a to b.
- */
-static void emovz(register short unsigned int *a, register short unsigned int *b)
-{
-register int i;
-
-for( i=0; i<NI-1; i++ )
-	*b++ = *a++;
-/* clear low guard word */
-*b = 0;
-}
-
-/* Return nonzero if internal format number is a NaN.
- */
-
-static int eiisnan (short unsigned int *x)
-{
-int i;
-
-if( (x[E] & 0x7fff) == 0x7fff )
-	{
-	for( i=M+1; i<NI; i++ )
-		{
-		if( x[i] != 0 )
-			return(1);
-		}
-	}
-return(0);
-}
-
-#if LDBL_MANT_DIG == 64
-
-/* Return nonzero if internal format number is infinite. */
-static int 
-eiisinf (x)
-     unsigned short x[];
-{
-
-#ifdef NANS
-  if (eiisnan (x))
-    return (0);
-#endif
-  if ((x[E] & 0x7fff) == 0x7fff)
-    return (1);
-  return (0);
-}
-#endif /* LDBL_MANT_DIG == 64 */
-
-/*
-;	Compare significands of numbers in internal format.
-;	Guard words are included in the comparison.
-;
-;	unsigned short a[NI], b[NI];
-;	cmpm( a, b );
-;
-;	for the significands:
-;	returns	+1 if a > b
-;		 0 if a == b
-;		-1 if a < b
-*/
-static int ecmpm(register short unsigned int *a, register short unsigned int *b)
-{
-int i;
-
-a += M; /* skip up to significand area */
-b += M;
-for( i=M; i<NI; i++ )
-	{
-	if( *a++ != *b++ )
-		goto difrnt;
-	}
-return(0);
-
-difrnt:
-if( *(--a) > *(--b) )
-	return(1);
-else
-	return(-1);
-}
-
-
-/*
-;	Shift significand down by 1 bit
-*/
-
-static void eshdn1(register short unsigned int *x)
-{
-register unsigned short bits;
-int i;
-
-x += M;	/* point to significand area */
-
-bits = 0;
-for( i=M; i<NI; i++ )
-	{
-	if( *x & 1 )
-		bits |= 1;
-	*x >>= 1;
-	if( bits & 2 )
-		*x |= 0x8000;
-	bits <<= 1;
-	++x;
-	}	
-}
-
-
-
-/*
-;	Shift significand up by 1 bit
-*/
-
-static void eshup1(register short unsigned int *x)
-{
-register unsigned short bits;
-int i;
-
-x += NI-1;
-bits = 0;
-
-for( i=M; i<NI; i++ )
-	{
-	if( *x & 0x8000 )
-		bits |= 1;
-	*x <<= 1;
-	if( bits & 2 )
-		*x |= 1;
-	bits <<= 1;
-	--x;
-	}
-}
-
-
-
-/*
-;	Shift significand down by 8 bits
-*/
-
-static void eshdn8(register short unsigned int *x)
-{
-register unsigned short newbyt, oldbyt;
-int i;
-
-x += M;
-oldbyt = 0;
-for( i=M; i<NI; i++ )
-	{
-	newbyt = *x << 8;
-	*x >>= 8;
-	*x |= oldbyt;
-	oldbyt = newbyt;
-	++x;
-	}
-}
-
-/*
-;	Shift significand up by 8 bits
-*/
-
-static void eshup8(register short unsigned int *x)
-{
-int i;
-register unsigned short newbyt, oldbyt;
-
-x += NI-1;
-oldbyt = 0;
-
-for( i=M; i<NI; i++ )
-	{
-	newbyt = *x >> 8;
-	*x <<= 8;
-	*x |= oldbyt;
-	oldbyt = newbyt;
-	--x;
-	}
-}
-
-/*
-;	Shift significand up by 16 bits
-*/
-
-static void eshup6(register short unsigned int *x)
-{
-int i;
-register unsigned short *p;
-
-p = x + M;
-x += M + 1;
-
-for( i=M; i<NI-1; i++ )
-	*p++ = *x++;
-
-*p = 0;
-}
-
-/*
-;	Shift significand down by 16 bits
-*/
-
-static void eshdn6(register short unsigned int *x)
-{
-int i;
-register unsigned short *p;
-
-x += NI-1;
-p = x + 1;
-
-for( i=M; i<NI-1; i++ )
-	*(--p) = *(--x);
-
-*(--p) = 0;
-}
-
-/*
-;	Add significands
-;	x + y replaces y
-*/
-
-static void eaddm(short unsigned int *x, short unsigned int *y)
-{
-register unsigned long a;
-int i;
-unsigned int carry;
-
-x += NI-1;
-y += NI-1;
-carry = 0;
-for( i=M; i<NI; i++ )
-	{
-	a = (unsigned long )(*x) + (unsigned long )(*y) + carry;
-	if( a & 0x10000 )
-		carry = 1;
-	else
-		carry = 0;
-	*y = (unsigned short )a;
-	--x;
-	--y;
-	}
-}
-
-/*
-;	Subtract significands
-;	y - x replaces y
-*/
-
-static void esubm(short unsigned int *x, short unsigned int *y)
-{
-unsigned long a;
-int i;
-unsigned int carry;
-
-x += NI-1;
-y += NI-1;
-carry = 0;
-for( i=M; i<NI; i++ )
-	{
-	a = (unsigned long )(*y) - (unsigned long )(*x) - carry;
-	if( a & 0x10000 )
-		carry = 1;
-	else
-		carry = 0;
-	*y = (unsigned short )a;
-	--x;
-	--y;
-	}
-}
-
-
-/* Divide significands */
-
-
-/* Multiply significand of e-type number b
-by 16-bit quantity a, e-type result to c. */
-
-static void m16m(short unsigned int a, short unsigned int *b, short unsigned int *c)
-{
-register unsigned short *pp;
-register unsigned long carry;
-unsigned short *ps;
-unsigned short p[NI];
-unsigned long aa, m;
-int i;
-
-aa = a;
-pp = &p[NI-2];
-*pp++ = 0;
-*pp = 0;
-ps = &b[NI-1];
-
-for( i=M+1; i<NI; i++ )
-	{
-	if( *ps == 0 )
-		{
-		--ps;
-		--pp;
-		*(pp-1) = 0;
-		}
-	else
-		{
-		m = (unsigned long) aa * *ps--;
-		carry = (m & 0xffff) + *pp;
-		*pp-- = (unsigned short )carry;
-		carry = (carry >> 16) + (m >> 16) + *pp;
-		*pp = (unsigned short )carry;
-		*(pp-1) = carry >> 16;
-		}
-	}
-for( i=M; i<NI; i++ )
-	c[i] = p[i];
-}
-
-
-/* Divide significands. Neither the numerator nor the denominator
-is permitted to have its high guard word nonzero.  */
-
-
-static int edivm(short unsigned int *den, short unsigned int *num, LDPARMS *ldp)
-{
-int i;
-register unsigned short *p;
-unsigned long tnum;
-unsigned short j, tdenm, tquot;
-unsigned short tprod[NI+1];
-unsigned short *equot = ldp->equot;
-
-p = &equot[0];
-*p++ = num[0];
-*p++ = num[1];
-
-for( i=M; i<NI; i++ )
-	{
-	*p++ = 0;
-	}
-eshdn1( num );
-tdenm = den[M+1];
-for( i=M; i<NI; i++ )
-	{
-	/* Find trial quotient digit (the radix is 65536). */
-	tnum = (((unsigned long) num[M]) << 16) + num[M+1];
-
-	/* Do not execute the divide instruction if it will overflow. */
-        if( (tdenm * 0xffffUL) < tnum )
-		tquot = 0xffff;
-	else
-		tquot = tnum / tdenm;
-
-		/* Prove that the divide worked. */
-/*
-	tcheck = (unsigned long )tquot * tdenm;
-	if( tnum - tcheck > tdenm )
-		tquot = 0xffff;
-*/
-	/* Multiply denominator by trial quotient digit. */
-	m16m( tquot, den, tprod );
-	/* The quotient digit may have been overestimated. */
-	if( ecmpm( tprod, num ) > 0 )
-		{
-		tquot -= 1;
-		esubm( den, tprod );
-		if( ecmpm( tprod, num ) > 0 )
-			{
-			tquot -= 1;
-			esubm( den, tprod );
-			}
-		}
-/*
-	if( ecmpm( tprod, num ) > 0 )
-		{
-		eshow( "tprod", tprod );
-		eshow( "num  ", num );
-		printf( "tnum = %08lx, tden = %04x, tquot = %04x\n",
-			 tnum, den[M+1], tquot );
-		}
-*/
-	esubm( tprod, num );
-/*
-	if( ecmpm( num, den ) >= 0 )
-		{
-		eshow( "num  ", num );
-		eshow( "den  ", den );
-		printf( "tnum = %08lx, tden = %04x, tquot = %04x\n",
-			 tnum, den[M+1], tquot );
-		}
-*/
-	equot[i] = tquot;
-	eshup6(num);
-	}
-/* test for nonzero remainder after roundoff bit */
-p = &num[M];
-j = 0;
-for( i=M; i<NI; i++ )
-	{
-	j |= *p++;
-	}
-if( j )
-	j = 1;
-
-for( i=0; i<NI; i++ )
-	num[i] = equot[i];
-
-return( (int )j );
-}
-
-
-
-/* Multiply significands */
-static int emulm(short unsigned int *a, short unsigned int *b, LDPARMS *ldp) 
-{
-unsigned short *p, *q;
-unsigned short pprod[NI];
-unsigned short j;
-int i;
-unsigned short *equot = ldp->equot;
-
-equot[0] = b[0];
-equot[1] = b[1];
-for( i=M; i<NI; i++ )
-	equot[i] = 0;
-
-j = 0;
-p = &a[NI-1];
-q = &equot[NI-1];
-for( i=M+1; i<NI; i++ )
-	{
-	if( *p == 0 )
-		{
-		--p;
-		}
-	else
-		{
-		m16m( *p--, b, pprod );
-		eaddm(pprod, equot);
-		}
-	j |= *q;
-	eshdn6(equot);
-	}
-
-for( i=0; i<NI; i++ )
-	b[i] = equot[i];
-
-/* return flag for lost nonzero bits */
-return( (int)j );
-}
-
-
-/*
-static void eshow(str, x)
-char *str;
-unsigned short *x;
-{
-int i;
-
-printf( "%s ", str );
-for( i=0; i<NI; i++ )
-	printf( "%04x ", *x++ );
-printf( "\n" );
-}
-*/
-
-
-/*
- * Normalize and round off.
- *
- * The internal format number to be rounded is "s".
- * Input "lost" indicates whether the number is exact.
- * This is the so-called sticky bit.
- *
- * Input "subflg" indicates whether the number was obtained
- * by a subtraction operation.  In that case if lost is nonzero
- * then the number is slightly smaller than indicated.
- *
- * Input "exp" is the biased exponent, which may be negative.
- * the exponent field of "s" is ignored but is replaced by
- * "exp" as adjusted by normalization and rounding.
- *
- * Input "rcntrl" is the rounding control.
- */
-
-
-static void emdnorm(short unsigned int *s, int lost, int subflg, long int exp, int rcntrl, LDPARMS *ldp)
-{
-int i, j;
-unsigned short r;
-
-/* Normalize */
-j = enormlz( s );
-
-/* a blank significand could mean either zero or infinity. */
-#ifndef INFINITY
-if( j > NBITS )
-	{
-	ecleazs( s );
-	return;
-	}
-#endif
-exp -= j;
-#ifndef INFINITY
-if( exp >= 32767L )
-	goto overf;
-#else
-if( (j > NBITS) && (exp < 32767L) )
-	{
-	ecleazs( s );
-	return;
-	}
-#endif
-if( exp < 0L )
-	{
-	if( exp > (long )(-NBITS-1) )
-		{
-		j = (int )exp;
-		i = eshift( s, j );
-		if( i )
-			lost = 1;
-		}
-	else
-		{
-		ecleazs( s );
-		return;
-		}
-	}
-/* Round off, unless told not to by rcntrl. */
-if( rcntrl == 0 )
-	goto mdfin;
-/* Set up rounding parameters if the control register changed. */
-if( ldp->rndprc != ldp->rlast )
-	{
-	ecleaz( ldp->rbit );
-	switch( ldp->rndprc )
-		{
-		default:
-		case NBITS:
-			ldp->rw = NI-1; /* low guard word */
-			ldp->rmsk = 0xffff;
-			ldp->rmbit = 0x8000;
-			ldp->rebit = 1;
-			ldp->re = ldp->rw - 1;
-			break;
-		case 113:
-			ldp->rw = 10;
-			ldp->rmsk = 0x7fff;
-			ldp->rmbit = 0x4000;
-			ldp->rebit = 0x8000;
-			ldp->re = ldp->rw;
-			break;
-		case 64:
-			ldp->rw = 7;
-			ldp->rmsk = 0xffff;
-			ldp->rmbit = 0x8000;
-			ldp->rebit = 1;
-			ldp->re = ldp->rw-1;
-			break;
-/* For DEC arithmetic */
-		case 56:
-			ldp->rw = 6;
-			ldp->rmsk = 0xff;
-			ldp->rmbit = 0x80;
-			ldp->rebit = 0x100;
-			ldp->re = ldp->rw;
-			break;
-		case 53:
-			ldp->rw = 6;
-			ldp->rmsk = 0x7ff;
-			ldp->rmbit = 0x0400;
-			ldp->rebit = 0x800;
-			ldp->re = ldp->rw;
-			break;
-		case 24:
-			ldp->rw = 4;
-			ldp->rmsk = 0xff;
-			ldp->rmbit = 0x80;
-			ldp->rebit = 0x100;
-			ldp->re = ldp->rw;
-			break;
-		}
-	ldp->rbit[ldp->re] = ldp->rebit;
-	ldp->rlast = ldp->rndprc;
-	}
-
-/* Shift down 1 temporarily if the data structure has an implied
- * most significant bit and the number is denormal.
- * For rndprc = 64 or NBITS, there is no implied bit.
- * But Intel long double denormals lose one bit of significance even so.
- */
-#if IBMPC
-if( (exp <= 0) && (ldp->rndprc != NBITS) )
-#else
-if( (exp <= 0) && (ldp->rndprc != 64) && (ldp->rndprc != NBITS) )
-#endif
-	{
-	lost |= s[NI-1] & 1;
-	eshdn1(s);
-	}
-/* Clear out all bits below the rounding bit,
- * remembering in r if any were nonzero.
- */
-r = s[ldp->rw] & ldp->rmsk;
-if( ldp->rndprc < NBITS )
-	{
-	i = ldp->rw + 1;
-	while( i < NI )
-		{
-		if( s[i] )
-			r |= 1;
-		s[i] = 0;
-		++i;
-		}
-	}
-s[ldp->rw] &= ~ldp->rmsk;
-if( (r & ldp->rmbit) != 0 )
-	{
-	if( r == ldp->rmbit )
-		{
-		if( lost == 0 )
-			{ /* round to even */
-			if( (s[ldp->re] & ldp->rebit) == 0 )
-				goto mddone;
-			}
-		else
-			{
-			if( subflg != 0 )
-				goto mddone;
-			}
-		}
-	eaddm( ldp->rbit, s );
-	}
-mddone:
-#if IBMPC
-if( (exp <= 0) && (ldp->rndprc != NBITS) )
-#else
-if( (exp <= 0) && (ldp->rndprc != 64) && (ldp->rndprc != NBITS) )
-#endif
-	{
-	eshup1(s);
-	}
-if( s[2] != 0 )
-	{ /* overflow on roundoff */
-	eshdn1(s);
-	exp += 1;
-	}
-mdfin:
-s[NI-1] = 0;
-if( exp >= 32767L )
-	{
-#ifndef INFINITY
-overf:
-#endif
-#ifdef INFINITY
-	s[1] = 32767;
-	for( i=2; i<NI-1; i++ )
-		s[i] = 0;
-#else
-	s[1] = 32766;
-	s[2] = 0;
-	for( i=M+1; i<NI-1; i++ )
-		s[i] = 0xffff;
-	s[NI-1] = 0;
-	if( (ldp->rndprc < 64) || (ldp->rndprc == 113) )
-		{
-		s[ldp->rw] &= ~ldp->rmsk;
-		if( ldp->rndprc == 24 )
-			{
-			s[5] = 0;
-			s[6] = 0;
-			}
-		}
-#endif
-	return;
-	}
-if( exp < 0 )
-	s[1] = 0;
-else
-	s[1] = (unsigned short )exp;
-}
-
-
-
-/*
-;	Subtract external format numbers.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp;
-;	esub( a, b, c, ldp );	 c = b - a
-*/
-
-static void esub(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-
-#ifdef NANS
-if( eisnan(a) )
-	{
-	emov (a, c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Infinity minus infinity is a NaN.
- * Test for subtracting infinities of the same sign.
- */
-if( eisinf(a) && eisinf(b) && ((eisneg (a) ^ eisneg (b)) == 0))
-	{
-	mtherr( "esub", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-eadd1( a, b, c, 1, ldp );
-}
-
-
-
-static void eadd1(short unsigned int *a, short unsigned int *b, short unsigned int *c, int subflg, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI], ci[NI];
-int i, lost, j, k;
-long lt, lta, ltb;
-
-#ifdef INFINITY
-if( eisinf(a) )
-	{
-	emov(a,c);
-	if( subflg )
-		eneg(c);
-	return;
-	}
-if( eisinf(b) )
-	{
-	emov(b,c);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-if( subflg )
-	ai[0] = ~ai[0];
-
-/* compare exponents */
-lta = ai[E];
-ltb = bi[E];
-lt = lta - ltb;
-if( lt > 0L )
-	{	/* put the larger number in bi */
-	emovz( bi, ci );
-	emovz( ai, bi );
-	emovz( ci, ai );
-	ltb = bi[E];
-	lt = -lt;
-	}
-lost = 0;
-if( lt != 0L )
-	{
-	if( lt < (long )(-NBITS-1) )
-		goto done;	/* answer same as larger addend */
-	k = (int )lt;
-	lost = eshift( ai, k ); /* shift the smaller number down */
-	}
-else
-	{
-/* exponents were the same, so must compare significands */
-	i = ecmpm( ai, bi );
-	if( i == 0 )
-		{ /* the numbers are identical in magnitude */
-		/* if different signs, result is zero */
-		if( ai[0] != bi[0] )
-			{
-			eclear(c);
-			return;
-			}
-		/* if same sign, result is double */
-		/* double denomalized tiny number */
-		if( (bi[E] == 0) && ((bi[3] & 0x8000) == 0) )
-			{
-			eshup1( bi );
-			goto done;
-			}
-		/* add 1 to exponent unless both are zero! */
-		for( j=1; j<NI-1; j++ )
-			{
-			if( bi[j] != 0 )
-				{
-/* This could overflow, but let emovo take care of that. */
-				ltb += 1;
-				break;
-				}
-			}
-		bi[E] = (unsigned short )ltb;
-		goto done;
-		}
-	if( i > 0 )
-		{	/* put the larger number in bi */
-		emovz( bi, ci );
-		emovz( ai, bi );
-		emovz( ci, ai );
-		}
-	}
-if( ai[0] == bi[0] )
-	{
-	eaddm( ai, bi );
-	subflg = 0;
-	}
-else
-	{
-	esubm( ai, bi );
-	subflg = 1;
-	}
-emdnorm( bi, lost, subflg, ltb, 64, ldp );
-
-done:
-emovo( bi, c, ldp );
-}
-
-
-
-/*
-;	Divide.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp;
-;	ediv( a, b, c, ldp );	c = b / a
-*/
-static void ediv(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI];
-int i;
-long lt, lta, ltb;
-
-#ifdef NANS
-/* Return any NaN input. */
-if( eisnan(a) )
-	{
-	emov(a,c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Zero over zero, or infinity over infinity, is a NaN. */
-if( ((ecmp(a,ezero) == 0) && (ecmp(b,ezero) == 0))
-	|| (eisinf (a) && eisinf (b)) )
-	{
-	mtherr( "ediv", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-/* Infinity over anything else is infinity. */
-#ifdef INFINITY
-if( eisinf(b) )
-	{
-	if( eisneg(a) ^ eisneg(b) )
-		*(c+(NE-1)) = 0x8000;
-	else
-		*(c+(NE-1)) = 0;
-	einfin(c, ldp);
-	return;
-	}
-if( eisinf(a) )
-	{
-	eclear(c);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-lta = ai[E];
-ltb = bi[E];
-if( bi[E] == 0 )
-	{ /* See if numerator is zero. */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( bi[i] != 0 )
-			{
-			ltb -= enormlz( bi );
-			goto dnzro1;
-			}
-		}
-	eclear(c);
-	return;
-	}
-dnzro1:
-
-if( ai[E] == 0 )
-	{	/* possible divide by zero */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			{
-			lta -= enormlz( ai );
-			goto dnzro2;
-			}
-		}
-	if( ai[0] == bi[0] )
-		*(c+(NE-1)) = 0;
-	else
-		*(c+(NE-1)) = 0x8000;
-	einfin(c, ldp);
-	mtherr( "ediv", SING );
-	return;
-	}
-dnzro2:
-
-i = edivm( ai, bi, ldp );
-/* calculate exponent */
-lt = ltb - lta + EXONE;
-emdnorm( bi, i, 0, lt, 64, ldp );
-/* set the sign */
-if( ai[0] == bi[0] )
-	bi[0] = 0;
-else
-	bi[0] = 0Xffff;
-emovo( bi, c, ldp );
-}
-
-
-
-/*
-;	Multiply.
-;
-;	unsigned short a[NE], b[NE], c[NE];
-;       LDPARMS *ldp
-;	emul( a, b, c, ldp );	c = b * a
-*/
-static void emul(short unsigned int *a, short unsigned int *b, short unsigned int *c, LDPARMS *ldp)
-{
-unsigned short ai[NI], bi[NI];
-int i, j;
-long lt, lta, ltb;
-
-#ifdef NANS
-/* NaN times anything is the same NaN. */
-if( eisnan(a) )
-	{
-	emov(a,c);
-	return;
-	}
-if( eisnan(b) )
-	{
-	emov(b,c);
-	return;
-	}
-/* Zero times infinity is a NaN. */
-if( (eisinf(a) && (ecmp(b,ezero) == 0))
-	|| (eisinf(b) && (ecmp(a,ezero) == 0)) )
-	{
-	mtherr( "emul", DOMAIN );
-	enan( c, NBITS );
-	return;
-	}
-#endif
-/* Infinity times anything else is infinity. */
-#ifdef INFINITY
-if( eisinf(a) || eisinf(b) )
-	{
-	if( eisneg(a) ^ eisneg(b) )
-		*(c+(NE-1)) = 0x8000;
-	else
-		*(c+(NE-1)) = 0;
-	einfin(c, ldp);
-	return;
-	}
-#endif
-emovi( a, ai );
-emovi( b, bi );
-lta = ai[E];
-ltb = bi[E];
-if( ai[E] == 0 )
-	{
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			{
-			lta -= enormlz( ai );
-			goto mnzer1;
-			}
-		}
-	eclear(c);
-	return;
-	}
-mnzer1:
-
-if( bi[E] == 0 )
-	{
-	for( i=1; i<NI-1; i++ )
-		{
-		if( bi[i] != 0 )
-			{
-			ltb -= enormlz( bi );
-			goto mnzer2;
-			}
-		}
-	eclear(c);
-	return;
-	}
-mnzer2:
-
-/* Multiply significands */
-j = emulm( ai, bi, ldp );
-/* calculate exponent */
-lt = lta + ltb - (EXONE - 1);
-emdnorm( bi, j, 0, lt, 64, ldp );
-/* calculate sign of product */
-if( ai[0] == bi[0] )
-	bi[0] = 0;
-else
-	bi[0] = 0xffff;
-emovo( bi, c, ldp );
-}
-
-
-
-#if LDBL_MANT_DIG > 64
-static void e113toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-register unsigned short r;
-unsigned short *e, *p;
-unsigned short yy[NI];
-int denorm, i;
-
-e = pe;
-denorm = 0;
-ecleaz(yy);
-#ifdef IBMPC
-e += 7;
-#endif
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-r &= 0x7fff;
-#ifdef INFINITY
-if( r == 0x7fff )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	for( i=0; i<7; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#else  /* !IBMPC */
-	for( i=1; i<8; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif /* !IBMPC */
-#endif /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( *e & 0x8000 )
-		eneg(y);
-	return;
-	}
-#endif  /* INFINITY */
-yy[E] = r;
-p = &yy[M + 1];
-#ifdef IBMPC
-for( i=0; i<7; i++ )
-	*p++ = *(--e);
-#else  /* IBMPC */
-++e;
-for( i=0; i<7; i++ )
-	*p++ = *e++;
-#endif /* IBMPC */ 
-/* If denormal, remove the implied bit; else shift down 1. */
-if( r == 0 )
-	{
-	yy[M] = 0;
-	}
-else
-	{
-	yy[M] = 1;
-	eshift( yy, -1 );
-	}
-emovo(yy,y,ldp);
-}
-
-/* move out internal format to ieee long double */
-static void toe113(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-#ifdef NANS
-if( eiisnan(a) )
-	{
-	enan( b, 113 );
-	return;
-	}
-#endif
-p = a;
-#ifdef MIEEE
-q = b;
-#else
-q = b + 7;			/* point to output exponent */
-#endif
-
-/* If not denormal, delete the implied bit. */
-if( a[E] != 0 )
-	{
-	eshup1 (a);
-	}
-/* combine sign and exponent */
-i = *p++;
-#ifdef MIEEE
-if( i )
-	*q++ = *p++ | 0x8000;
-else
-	*q++ = *p++;
-#else
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-#ifdef MIEEE
-for (i = 0; i < 7; i++)
-	*q++ = *p++;
-#else
-for (i = 0; i < 7; i++)
-	*q-- = *p++;
-#endif
-}
-#endif /* LDBL_MANT_DIG > 64 */
-
-
-#if LDBL_MANT_DIG == 64
-static void e64toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-unsigned short yy[NI];
-unsigned short *p, *q, *e;
-int i;
-
-e = pe;
-p = yy;
-
-for( i=0; i<NE-5; i++ )
-	*p++ = 0;
-#ifdef IBMPC
-for( i=0; i<5; i++ )
-	*p++ = *e++;
-#endif
-#ifdef DEC
-for( i=0; i<5; i++ )
-	*p++ = *e++;
-#endif
-#ifdef MIEEE
-p = &yy[0] + (NE-1);
-*p-- = *e++;
-++e;  /* MIEEE skips over 2nd short */
-for( i=0; i<4; i++ )
-	*p-- = *e++;
-#endif
-
-#ifdef IBMPC
-/* For Intel long double, shift denormal significand up 1
-   -- but only if the top significand bit is zero.  */
-if((yy[NE-1] & 0x7fff) == 0 && (yy[NE-2] & 0x8000) == 0)
-  {
-    unsigned short temp[NI+1];
-    emovi(yy, temp);
-    eshup1(temp);
-    emovo(temp,y,ldp);
-    return;
-  }
-#endif
-#ifdef INFINITY
-/* Point to the exponent field.  */
-p = &yy[NE-1];
-if( (*p & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	for( i=0; i<4; i++ )
-		{
-		if((i != 3 && pe[i] != 0)
-		   /* Check for Intel long double infinity pattern.  */
-		   || (i == 3 && pe[i] != 0x8000))
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif
-#ifdef MIEEE
-	for( i=2; i<=5; i++ )
-		{
-		if( pe[i] != 0 )
-			{
-			enan( y, NBITS );
-			return;
-			}
-		}
-#endif
-#endif /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( *p & 0x8000 )
-		eneg(y);
-	return;
-	}
-#endif /* INFINITY */
-p = yy;
-q = y;
-for( i=0; i<NE; i++ )
-	*q++ = *p++;
-}
-
-/* move out internal format to ieee long double */
-static void toe64(short unsigned int *a, short unsigned int *b)
-{
-register unsigned short *p, *q;
-unsigned short i;
-
-#ifdef NANS
-if( eiisnan(a) )
-	{
-	enan( b, 64 );
-	return;
-	}
-#endif
-#ifdef IBMPC
-/* Shift Intel denormal significand down 1.  */
-if( a[E] == 0 )
-  eshdn1(a);
-#endif
-p = a;
-#ifdef MIEEE
-q = b;
-#else
-q = b + 4; /* point to output exponent */
-/* NOTE: Intel data type is 96 bits wide, clear the last word here. */
-*(q+1)= 0;
-#endif
-
-/* combine sign and exponent */
-i = *p++;
-#ifdef MIEEE
-if( i )
-	*q++ = *p++ | 0x8000;
-else
-	*q++ = *p++;
-*q++ = 0; /* leave 2nd short blank */
-#else
-if( i )
-	*q-- = *p++ | 0x8000;
-else
-	*q-- = *p++;
-#endif
-/* skip over guard word */
-++p;
-/* move the significand */
-#ifdef MIEEE
-for( i=0; i<4; i++ )
-	*q++ = *p++;
-#else
-#ifdef INFINITY
-#ifdef IBMPC
-if (eiisinf (a))
-        {
-	/* Intel long double infinity.  */
-	*q-- = 0x8000;
-	*q-- = 0;
-	*q-- = 0;
-	*q = 0;
-	return;
-	}
-#endif /* IBMPC */
-#endif /* INFINITY */
-for( i=0; i<4; i++ )
-	*q-- = *p++;
-#endif
-}
-
-#endif /* LDBL_MANT_DIG == 64 */
-
-#if LDBL_MANT_DIG == 53
-/*
-; Convert IEEE double precision to e type
-;	double d;
-;	unsigned short x[N+2];
-;	e53toe( &d, x );
-*/
-static void e53toe(short unsigned int *pe, short unsigned int *y, LDPARMS *ldp)
-{
-#ifdef DEC
-
-dectoe( pe, y ); /* see etodec.c */
-
-#else
-
-register unsigned short r;
-register unsigned short *p, *e;
-unsigned short yy[NI];
-int denorm, k;
-
-e = pe;
-denorm = 0;	/* flag if denormalized number */
-ecleaz(yy);
-#ifdef IBMPC
-e += 3;
-#endif
-#ifdef DEC
-e += 3;
-#endif 
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-yy[M] = (r & 0x0f) | 0x10;
-r &= ~0x800f;	/* strip sign and 4 significand bits */
-#ifdef INFINITY
-if( r == 0x7ff0 )
-	{
-#ifdef NANS
-#ifdef IBMPC
-	if( ((pe[3] & 0xf) != 0) || (pe[2] != 0)
-		|| (pe[1] != 0) || (pe[0] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#else  /* !IBMPC */
-	if( ((pe[0] & 0xf) != 0) || (pe[1] != 0)
-		 || (pe[2] != 0) || (pe[3] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#endif /* !IBMPC */
-#endif  /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( yy[0] )
-		eneg(y);
-	return;
-	}
-#endif
-r >>= 4;
-/* If zero exponent, then the significand is denormalized.
- * So, take back the understood high significand bit. */ 
-if( r == 0 )
-	{
-	denorm = 1;
-	yy[M] &= ~0x10;
-	}
-r += EXONE - 01777;
-yy[E] = r;
-p = &yy[M+1];
-#ifdef IBMPC
-*p++ = *(--e);
-*p++ = *(--e);
-*p++ = *(--e);
-#else  /* !IBMPC */
-++e;
-*p++ = *e++;
-*p++ = *e++;
-*p++ = *e++;
-#endif /* !IBMPC */
-(void )eshift( yy, -5 );
-if( denorm )
-	{ /* if zero exponent, then normalize the significand */
-	if( (k = enormlz(yy)) > NBITS )
-		ecleazs(yy);
-	else
-		yy[E] -= (unsigned short )(k-1);
-	}
-emovo( yy, y, ldp );
-#endif /* !DEC */
-}
-
-/*
-; e type to IEEE double precision
-;	double d;
-;	unsigned short x[NE];
-;	etoe53( x, &d );
-*/
-
-#ifdef DEC
-
-static void etoe53( x, e )
-unsigned short *x, *e;
-{
-etodec( x, e ); /* see etodec.c */
-}
-
-static void toe53( x, y )
-unsigned short *x, *y;
-{
-todec( x, y );
-}
-
-#else
-
-static void toe53(short unsigned int *x, short unsigned int *y)
-{
-unsigned short i;
-unsigned short *p;
-
-
-#ifdef NANS
-if( eiisnan(x) )
-	{
-	enan( y, 53 );
-	return;
-	}
-#endif
-p = &x[0];
-#ifdef IBMPC
-y += 3;
-#endif
-#ifdef DEC
-y += 3;
-#endif
-*y = 0;	/* output high order */
-if( *p++ )
-	*y = 0x8000;	/* output sign bit */
-
-i = *p++;
-if( i >= (unsigned int )2047 )
-	{	/* Saturate at largest number less than infinity. */
-#ifdef INFINITY
-	*y |= 0x7ff0;
-#ifdef IBMPC
-	*(--y) = 0;
-	*(--y) = 0;
-	*(--y) = 0;
-#else /* !IBMPC */
-	++y;
-	*y++ = 0;
-	*y++ = 0;
-	*y++ = 0;
-#endif /* IBMPC */
-#else /* !INFINITY */
-	*y |= (unsigned short )0x7fef;
-#ifdef IBMPC
-	*(--y) = 0xffff;
-	*(--y) = 0xffff;
-	*(--y) = 0xffff;
-#else /* !IBMPC */
-	++y;
-	*y++ = 0xffff;
-	*y++ = 0xffff;
-	*y++ = 0xffff;
-#endif
-#endif /* !INFINITY */
-	return;
-	}
-if( i == 0 )
-	{
-	(void )eshift( x, 4 );
-	}
-else
-	{
-	i <<= 4;
-	(void )eshift( x, 5 );
-	}
-i |= *p++ & (unsigned short )0x0f;	/* *p = xi[M] */
-*y |= (unsigned short )i; /* high order output already has sign bit set */
-#ifdef IBMPC
-*(--y) = *p++;
-*(--y) = *p++;
-*(--y) = *p;
-#else /* !IBMPC */
-++y;
-*y++ = *p++;
-*y++ = *p++;
-*y++ = *p++;
-#endif /* !IBMPC */
-}
-
-#endif /* not DEC */
-#endif /* LDBL_MANT_DIG == 53 */
-
-#if LDBL_MANT_DIG == 24
-/*
-; Convert IEEE single precision to e type
-;	float d;
-;	unsigned short x[N+2];
-;	dtox( &d, x );
-*/
-void e24toe( short unsigned int *pe, short unsigned int *y, LDPARMS *ldp )
-{
-register unsigned short r;
-register unsigned short *p, *e;
-unsigned short yy[NI];
-int denorm, k;
-
-e = pe;
-denorm = 0;	/* flag if denormalized number */
-ecleaz(yy);
-#ifdef IBMPC
-e += 1;
-#endif
-#ifdef DEC
-e += 1;
-#endif
-r = *e;
-yy[0] = 0;
-if( r & 0x8000 )
-	yy[0] = 0xffff;
-yy[M] = (r & 0x7f) | 0200;
-r &= ~0x807f;	/* strip sign and 7 significand bits */
-#ifdef INFINITY
-if( r == 0x7f80 )
-	{
-#ifdef NANS
-#ifdef MIEEE
-	if( ((pe[0] & 0x7f) != 0) || (pe[1] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#else  /* !MIEEE */
-	if( ((pe[1] & 0x7f) != 0) || (pe[0] != 0) )
-		{
-		enan( y, NBITS );
-		return;
-		}
-#endif /* !MIEEE */
-#endif  /* NANS */
-	eclear( y );
-	einfin( y, ldp );
-	if( yy[0] )
-		eneg(y);
-	return;
-	}
-#endif
-r >>= 7;
-/* If zero exponent, then the significand is denormalized.
- * So, take back the understood high significand bit. */ 
-if( r == 0 )
-	{
-	denorm = 1;
-	yy[M] &= ~0200;
-	}
-r += EXONE - 0177;
-yy[E] = r;
-p = &yy[M+1];
-#ifdef IBMPC
-*p++ = *(--e);
-#endif
-#ifdef DEC
-*p++ = *(--e);
-#endif
-#ifdef MIEEE
-++e;
-*p++ = *e++;
-#endif
-(void )eshift( yy, -8 );
-if( denorm )
-	{ /* if zero exponent, then normalize the significand */
-	if( (k = enormlz(yy)) > NBITS )
-		ecleazs(yy);
-	else
-		yy[E] -= (unsigned short )(k-1);
-	}
-emovo( yy, y, ldp );
-}
-
-static void toe24(short unsigned int *x, short unsigned int *y)
-{
-unsigned short i;
-unsigned short *p;
-
-#ifdef NANS
-if( eiisnan(x) )
-	{
-	enan( y, 24 );
-	return;
-	}
-#endif
-p = &x[0];
-#ifdef IBMPC
-y += 1;
-#endif
-#ifdef DEC
-y += 1;
-#endif
-*y = 0;	/* output high order */
-if( *p++ )
-	*y = 0x8000;	/* output sign bit */
-
-i = *p++;
-if( i >= 255 )
-	{	/* Saturate at largest number less than infinity. */
-#ifdef INFINITY
-	*y |= (unsigned short )0x7f80;
-#ifdef IBMPC
-	*(--y) = 0;
-#endif
-#ifdef DEC
-	*(--y) = 0;
-#endif
-#ifdef MIEEE
-	++y;
-	*y = 0;
-#endif
-#else /* !INFINITY */
-	*y |= (unsigned short )0x7f7f;
-#ifdef IBMPC
-	*(--y) = 0xffff;
-#endif
-#ifdef DEC
-	*(--y) = 0xffff;
-#endif
-#ifdef MIEEE
-	++y;
-	*y = 0xffff;
-#endif
-#endif /* !INFINITY */
-	return;
-	}
-if( i == 0 )
-	{
-	(void )eshift( x, 7 );
-	}
-else
-	{
-	i <<= 7;
-	(void )eshift( x, 8 );
-	}
-i |= *p++ & (unsigned short )0x7f;	/* *p = xi[M] */
-*y |= i;	/* high order output already has sign bit set */
-#ifdef IBMPC
-*(--y) = *p;
-#endif
-#ifdef DEC
-*(--y) = *p;
-#endif
-#ifdef MIEEE
-++y;
-*y = *p;
-#endif
-}
-#endif /* LDBL_MANT_DIG == 24 */
-
-/* Compare two e type numbers.
- *
- * unsigned short a[NE], b[NE];
- * ecmp( a, b );
- *
- *  returns +1 if a > b
- *           0 if a == b
- *          -1 if a < b
- *          -2 if either a or b is a NaN.
- */
-static int ecmp(short unsigned int *a, short unsigned int *b)
-{
-unsigned short ai[NI], bi[NI];
-register unsigned short *p, *q;
-register int i;
-int msign;
-
-#ifdef NANS
-if (eisnan (a)  || eisnan (b))
-	return( -2 );
-#endif
-emovi( a, ai );
-p = ai;
-emovi( b, bi );
-q = bi;
-
-if( *p != *q )
-	{ /* the signs are different */
-/* -0 equals + 0 */
-	for( i=1; i<NI-1; i++ )
-		{
-		if( ai[i] != 0 )
-			goto nzro;
-		if( bi[i] != 0 )
-			goto nzro;
-		}
-	return(0);
-nzro:
-	if( *p == 0 )
-		return( 1 );
-	else
-		return( -1 );
-	}
-/* both are the same sign */
-if( *p == 0 )
-	msign = 1;
-else
-	msign = -1;
-i = NI-1;
-do
-	{
-	if( *p++ != *q++ )
-		{
-		goto diff;
-		}
-	}
-while( --i > 0 );
-
-return(0);	/* equality */
-
-
-
-diff:
-
-if( *(--p) > *(--q) )
-	return( msign );		/* p is bigger */
-else
-	return( -msign );	/* p is littler */
-}
-
-
-/*
-;	Shift significand
-;
-;	Shifts significand area up or down by the number of bits
-;	given by the variable sc.
-*/
-static int eshift(short unsigned int *x, int sc)
-{
-unsigned short lost;
-unsigned short *p;
-
-if( sc == 0 )
-	return( 0 );
-
-lost = 0;
-p = x + NI-1;
-
-if( sc < 0 )
-	{
-	sc = -sc;
-	while( sc >= 16 )
-		{
-		lost |= *p;	/* remember lost bits */
-		eshdn6(x);
-		sc -= 16;
-		}
-
-	while( sc >= 8 )
-		{
-		lost |= *p & 0xff;
-		eshdn8(x);
-		sc -= 8;
-		}
-
-	while( sc > 0 )
-		{
-		lost |= *p & 1;
-		eshdn1(x);
-		sc -= 1;
-		}
-	}
-else
-	{
-	while( sc >= 16 )
-		{
-		eshup6(x);
-		sc -= 16;
-		}
-
-	while( sc >= 8 )
-		{
-		eshup8(x);
-		sc -= 8;
-		}
-
-	while( sc > 0 )
-		{
-		eshup1(x);
-		sc -= 1;
-		}
-	}
-if( lost )
-	lost = 1;
-return( (int )lost );
-}
-
-
-
-/*
-;	normalize
-;
-; Shift normalizes the significand area pointed to by argument
-; shift count (up = positive) is returned.
-*/
-static int enormlz(short unsigned int *x)
-{
-register unsigned short *p;
-int sc;
-
-sc = 0;
-p = &x[M];
-if( *p != 0 )
-	goto normdn;
-++p;
-if( *p & 0x8000 )
-	return( 0 );	/* already normalized */
-while( *p == 0 )
-	{
-	eshup6(x);
-	sc += 16;
-/* With guard word, there are NBITS+16 bits available.
- * return true if all are zero.
- */
-	if( sc > NBITS )
-		return( sc );
-	}
-/* see if high byte is zero */
-while( (*p & 0xff00) == 0 )
-	{
-	eshup8(x);
-	sc += 8;
-	}
-/* now shift 1 bit at a time */
-while( (*p  & 0x8000) == 0)
-	{
-	eshup1(x);
-	sc += 1;
-	if( sc > (NBITS+16) )
-		{
-		mtherr( "enormlz", UNDERFLOW );
-		return( sc );
-		}
-	}
-return( sc );
-
-/* Normalize by shifting down out of the high guard word
-   of the significand */
-normdn:
-
-if( *p & 0xff00 )
-	{
-	eshdn8(x);
-	sc -= 8;
-	}
-while( *p != 0 )
-	{
-	eshdn1(x);
-	sc -= 1;
-
-	if( sc < -NBITS )
-		{
-		mtherr( "enormlz", OVERFLOW );
-		return( sc );
-		}
-	}
-return( sc );
-}
-
-
-
-
-/* Convert e type number to decimal format ASCII string.
- * The constants are for 64 bit precision.
- */
-
-#define NTEN 12
-#define MAXP 4096
-
-#if NE == 10
-static unsigned short etens[NTEN + 1][NE] =
-{
-  {0x6576, 0x4a92, 0x804a, 0x153f,
-   0xc94c, 0x979a, 0x8a20, 0x5202, 0xc460, 0x7525,},	/* 10**4096 */
-  {0x6a32, 0xce52, 0x329a, 0x28ce,
-   0xa74d, 0x5de4, 0xc53d, 0x3b5d, 0x9e8b, 0x5a92,},	/* 10**2048 */
-  {0x526c, 0x50ce, 0xf18b, 0x3d28,
-   0x650d, 0x0c17, 0x8175, 0x7586, 0xc976, 0x4d48,},
-  {0x9c66, 0x58f8, 0xbc50, 0x5c54,
-   0xcc65, 0x91c6, 0xa60e, 0xa0ae, 0xe319, 0x46a3,},
-  {0x851e, 0xeab7, 0x98fe, 0x901b,
-   0xddbb, 0xde8d, 0x9df9, 0xebfb, 0xaa7e, 0x4351,},
-  {0x0235, 0x0137, 0x36b1, 0x336c,
-   0xc66f, 0x8cdf, 0x80e9, 0x47c9, 0x93ba, 0x41a8,},
-  {0x50f8, 0x25fb, 0xc76b, 0x6b71,
-   0x3cbf, 0xa6d5, 0xffcf, 0x1f49, 0xc278, 0x40d3,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0xf020, 0xb59d, 0x2b70, 0xada8, 0x9dc5, 0x4069,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0400, 0xc9bf, 0x8e1b, 0x4034,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x2000, 0xbebc, 0x4019,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0x9c40, 0x400c,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0xc800, 0x4005,},
-  {0x0000, 0x0000, 0x0000, 0x0000,
-   0x0000, 0x0000, 0x0000, 0x0000, 0xa000, 0x4002,},	/* 10**1 */
-};
-
-static unsigned short emtens[NTEN + 1][NE] =
-{
-  {0x2030, 0xcffc, 0xa1c3, 0x8123,
-   0x2de3, 0x9fde, 0xd2ce, 0x04c8, 0xa6dd, 0x0ad8,},	/* 10**-4096 */
-  {0x8264, 0xd2cb, 0xf2ea, 0x12d4,
-   0x4925, 0x2de4, 0x3436, 0x534f, 0xceae, 0x256b,},	/* 10**-2048 */
-  {0xf53f, 0xf698, 0x6bd3, 0x0158,
-   0x87a6, 0xc0bd, 0xda57, 0x82a5, 0xa2a6, 0x32b5,},
-  {0xe731, 0x04d4, 0xe3f2, 0xd332,
-   0x7132, 0xd21c, 0xdb23, 0xee32, 0x9049, 0x395a,},
-  {0xa23e, 0x5308, 0xfefb, 0x1155,
-   0xfa91, 0x1939, 0x637a, 0x4325, 0xc031, 0x3cac,},
-  {0xe26d, 0xdbde, 0xd05d, 0xb3f6,
-   0xac7c, 0xe4a0, 0x64bc, 0x467c, 0xddd0, 0x3e55,},
-  {0x2a20, 0x6224, 0x47b3, 0x98d7,
-   0x3f23, 0xe9a5, 0xa539, 0xea27, 0xa87f, 0x3f2a,},
-  {0x0b5b, 0x4af2, 0xa581, 0x18ed,
-   0x67de, 0x94ba, 0x4539, 0x1ead, 0xcfb1, 0x3f94,},
-  {0xbf71, 0xa9b3, 0x7989, 0xbe68,
-   0x4c2e, 0xe15b, 0xc44d, 0x94be, 0xe695, 0x3fc9,},
-  {0x3d4d, 0x7c3d, 0x36ba, 0x0d2b,
-   0xfdc2, 0xcefc, 0x8461, 0x7711, 0xabcc, 0x3fe4,},
-  {0xc155, 0xa4a8, 0x404e, 0x6113,
-   0xd3c3, 0x652b, 0xe219, 0x1758, 0xd1b7, 0x3ff1,},
-  {0xd70a, 0x70a3, 0x0a3d, 0xa3d7,
-   0x3d70, 0xd70a, 0x70a3, 0x0a3d, 0xa3d7, 0x3ff8,},
-  {0xcccd, 0xcccc, 0xcccc, 0xcccc,
-   0xcccc, 0xcccc, 0xcccc, 0xcccc, 0xcccc, 0x3ffb,},	/* 10**-1 */
-};
-#else
-static unsigned short etens[NTEN+1][NE] = {
-{0xc94c,0x979a,0x8a20,0x5202,0xc460,0x7525,},/* 10**4096 */
-{0xa74d,0x5de4,0xc53d,0x3b5d,0x9e8b,0x5a92,},/* 10**2048 */
-{0x650d,0x0c17,0x8175,0x7586,0xc976,0x4d48,},
-{0xcc65,0x91c6,0xa60e,0xa0ae,0xe319,0x46a3,},
-{0xddbc,0xde8d,0x9df9,0xebfb,0xaa7e,0x4351,},
-{0xc66f,0x8cdf,0x80e9,0x47c9,0x93ba,0x41a8,},
-{0x3cbf,0xa6d5,0xffcf,0x1f49,0xc278,0x40d3,},
-{0xf020,0xb59d,0x2b70,0xada8,0x9dc5,0x4069,},
-{0x0000,0x0000,0x0400,0xc9bf,0x8e1b,0x4034,},
-{0x0000,0x0000,0x0000,0x2000,0xbebc,0x4019,},
-{0x0000,0x0000,0x0000,0x0000,0x9c40,0x400c,},
-{0x0000,0x0000,0x0000,0x0000,0xc800,0x4005,},
-{0x0000,0x0000,0x0000,0x0000,0xa000,0x4002,}, /* 10**1 */
-};
-
-static unsigned short emtens[NTEN+1][NE] = {
-{0x2de4,0x9fde,0xd2ce,0x04c8,0xa6dd,0x0ad8,}, /* 10**-4096 */
-{0x4925,0x2de4,0x3436,0x534f,0xceae,0x256b,}, /* 10**-2048 */
-{0x87a6,0xc0bd,0xda57,0x82a5,0xa2a6,0x32b5,},
-{0x7133,0xd21c,0xdb23,0xee32,0x9049,0x395a,},
-{0xfa91,0x1939,0x637a,0x4325,0xc031,0x3cac,},
-{0xac7d,0xe4a0,0x64bc,0x467c,0xddd0,0x3e55,},
-{0x3f24,0xe9a5,0xa539,0xea27,0xa87f,0x3f2a,},
-{0x67de,0x94ba,0x4539,0x1ead,0xcfb1,0x3f94,},
-{0x4c2f,0xe15b,0xc44d,0x94be,0xe695,0x3fc9,},
-{0xfdc2,0xcefc,0x8461,0x7711,0xabcc,0x3fe4,},
-{0xd3c3,0x652b,0xe219,0x1758,0xd1b7,0x3ff1,},
-{0x3d71,0xd70a,0x70a3,0x0a3d,0xa3d7,0x3ff8,},
-{0xcccd,0xcccc,0xcccc,0xcccc,0xcccc,0x3ffb,}, /* 10**-1 */
-};
-#endif
-
-
-
-/* ASCII string outputs for unix */
-
-
-#if 0
-void _IO_ldtostr(x, string, ndigs, flags, fmt)
-long double *x;
-char *string;
-int ndigs;
-int flags;
-char fmt;
-{
-unsigned short w[NI];
-char *t, *u;
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-if (sizeof(long double) == 16)
-  e113toe( (unsigned short *)x, w, ldp );
-else
-  e64toe( (unsigned short *)x, w, ldp );
-
-etoasc( w, string, ndigs, -1, ldp );
-if( ndigs == 0 && flags == 0 )
-	{
-	/* Delete the decimal point unless alternate format.  */
-	t = string;	
-	while( *t != '.' )
-		++t;
-	u = t +  1;
-	while( *t != '\0' )
-		*t++ = *u++;
-	}
-if (*string == ' ')
-	{
-	t = string;	
-	u = t + 1;
-	while( *t != '\0' )
-		*t++ = *u++;
-	}
-if (fmt == 'E')
-	{
-	t = string;	
-	while( *t != 'e' )
-		++t;
-	*t = 'E';
-	}
-}
-
-#endif
-
-/* This routine will not return more than NDEC+1 digits. */
-
-char *
-_ldtoa_r (struct _reent *ptr, long double d, int mode, int ndigits, int *decpt, 
-          int *sign, char **rve)
-{
-unsigned short e[NI];
-char *s, *p;
-int i, j, k;
-int orig_ndigits;
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-char *outstr;
-char outbuf[NDEC + MAX_EXP_DIGITS + 10];
-
-orig_ndigits = ndigits;
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-  _REENT_CHECK_MP(ptr);
-
-/* reentrancy addition to use mprec storage pool */
-if (_REENT_MP_RESULT(ptr))
-  {
-    _REENT_MP_RESULT(ptr)->_k = _REENT_MP_RESULT_K(ptr);
-    _REENT_MP_RESULT(ptr)->_maxwds = 1 << _REENT_MP_RESULT_K(ptr);
-    Bfree (ptr, _REENT_MP_RESULT(ptr));
-    _REENT_MP_RESULT(ptr) = 0;
-  }
-
-#if LDBL_MANT_DIG == 24
-e24toe( (unsigned short *)&d, e, ldp );
-#elif LDBL_MANT_DIG == 53
-e53toe( (unsigned short *)&d, e, ldp );
-#elif LDBL_MANT_DIG == 64
-e64toe( (unsigned short *)&d, e, ldp );
-#else
-e113toe( (unsigned short *)&d, e, ldp );
-#endif
-
-if( eisneg(e) )
-        *sign = 1;
-else
-        *sign = 0;
-/* Mode 3 is "f" format.  */
-if( mode != 3 )
-        ndigits -= 1;
-/* Mode 0 is for %.999 format, which is supposed to give a
-   minimum length string that will convert back to the same binary value.
-   For now, just ask for 20 digits which is enough but sometimes too many.  */
-if( mode == 0 )
-        ndigits = 20;
-
-/* This sanity limit must agree with the corresponding one in etoasc, to
-   keep straight the returned value of outexpon.  */
-if( ndigits > NDEC )
-        ndigits = NDEC;
-
-etoasc( e, outbuf, ndigits, mode, ldp );
-s =  outbuf;
-if( eisinf(e) || eisnan(e) )
-        {
-        *decpt = 9999;
-        goto stripspaces;
-        }
-*decpt = ldp->outexpon + 1;
-
-/* Transform the string returned by etoasc into what the caller wants.  */
-
-/* Look for decimal point and delete it from the string. */
-s = outbuf;
-while( *s != '\0' )
-        {
-        if( *s == '.' )
-               goto yesdecpt;
-        ++s;
-        }
-goto nodecpt;
-
-yesdecpt:
-
-/* Delete the decimal point.  */
-while( *s != '\0' )
-        {
-        *s = *(s+1);
-        ++s;
-        }
-
-nodecpt:
-
-/* Back up over the exponent field. */
-while( *s != 'E' && s > outbuf)
-        --s;
-*s = '\0';
-
-stripspaces:
-
-/* Strip leading spaces and sign. */
-p = outbuf;
-while( *p == ' ' || *p == '-')
-        ++p;
-
-/* Find new end of string.  */
-s = outbuf;
-while( (*s++ = *p++) != '\0' )
-        ;
---s;
-
-/* Strip trailing zeros.  */
-if( mode == 2 )
-        k = 1;
-else if( ndigits > ldp->outexpon )
-        k = ndigits;
-else
-        k = ldp->outexpon;
-
-while( *(s-1) == '0' && ((s - outbuf) > k))
-        *(--s) = '\0';
-
-/* In f format, flush small off-scale values to zero.
-   Rounding has been taken care of by etoasc. */
-if( mode == 3 && ((ndigits + ldp->outexpon) < 0))
-        {
-        s = outbuf;
-        *s = '\0';
-        *decpt = 0;
-        }
-
-/* reentrancy addition to use mprec storage pool */
-/* we want to have enough space to hold the formatted result */
-
-if (mode == 3) /* f format, account for sign + dec digits + decpt + frac */
-  i = *decpt + orig_ndigits + 3;
-else /* account for sign + max precision digs + E + exp sign + exponent */
-  i = orig_ndigits + MAX_EXP_DIGITS + 4;
-
-j = sizeof (__ULong);
-for (_REENT_MP_RESULT_K(ptr) = 0; sizeof (_Bigint) - sizeof (__ULong) + j <= i; j <<= 1)
-  _REENT_MP_RESULT_K(ptr)++;
-_REENT_MP_RESULT(ptr) = Balloc (ptr, _REENT_MP_RESULT_K(ptr));
-
-/* Copy from internal temporary buffer to permanent buffer.  */
-outstr = (char *)_REENT_MP_RESULT(ptr);
-strcpy (outstr, outbuf);
-
-if( rve )
-        *rve = outstr + (s - outbuf);
-
-return outstr;
-}
-
-/* Routine used to tell if long double is NaN or Infinity or regular number. 
-   Returns:  0 = regular number
-             1 = Nan
-             2 = Infinity
-*/
-int
-_ldcheck (long double *d)
-{
-unsigned short e[NI];
-LDPARMS rnd;
-LDPARMS *ldp = &rnd;
-
-rnd.rlast = -1;
-rnd.rndprc = NBITS;
-
-#if LDBL_MANT_DIG == 24
-e24toe( (unsigned short *)d, e, ldp );
-#elif LDBL_MANT_DIG == 53
-e53toe( (unsigned short *)d, e, ldp );
-#elif LDBL_MANT_DIG == 64
-e64toe( (unsigned short *)d, e, ldp );
-#else
-e113toe( (unsigned short *)d, e, ldp );
-#endif
-
-if( (e[NE-1] & 0x7fff) == 0x7fff )
-	{
-#ifdef NANS
-	if( eisnan(e) )
-		return( 1 );
-#endif
-	return( 2 );
-	}
-else
-	return( 0 );
-} /* _ldcheck */
-
-static void etoasc(short unsigned int *x, char *string, int ndigits, int outformat, LDPARMS *ldp)
-{
-long digit;
-unsigned short y[NI], t[NI], u[NI], w[NI];
-unsigned short *p, *r, *ten;
-unsigned short sign;
-int i, j, k, expon, rndsav, ndigs;
-char *s, *ss;
-unsigned short m;
-unsigned short *equot = ldp->equot;
-
-ndigs = ndigits;
-rndsav = ldp->rndprc;
-#ifdef NANS
-if( eisnan(x) )
-	{
-	sprintf( string, " NaN " );
-	expon = 9999;
-	goto bxit;
-	}
-#endif
-ldp->rndprc = NBITS;		/* set to full precision */
-emov( x, y ); /* retain external format */
-if( y[NE-1] & 0x8000 )
-	{
-	sign = 0xffff;
-	y[NE-1] &= 0x7fff;
-	}
-else
-	{
-	sign = 0;
-	}
-expon = 0;
-ten = &etens[NTEN][0];
-emov( eone, t );
-/* Test for zero exponent */
-if( y[NE-1] == 0 )
-	{
-	for( k=0; k<NE-1; k++ )
-		{
-		if( y[k] != 0 )
-			goto tnzro; /* denormalized number */
-		}
-	goto isone; /* legal all zeros */
-	}
-tnzro:
-
-/* Test for infinity.
- */
-if( y[NE-1] == 0x7fff )
-	{
-	if( sign )
-		sprintf( string, " -Infinity " );
-	else
-		sprintf( string, " Infinity " );
-	expon = 9999;
-	goto bxit;
-	}
-
-/* Test for exponent nonzero but significand denormalized.
- * This is an error condition.
- */
-if( (y[NE-1] != 0) && ((y[NE-2] & 0x8000) == 0) )
-	{
-	mtherr( "etoasc", DOMAIN );
-	sprintf( string, "NaN" );
-	expon = 9999;
-	goto bxit;
-	}
-
-/* Compare to 1.0 */
-i = ecmp( eone, y );
-if( i == 0 )
-	goto isone;
-
-if( i < 0 )
-	{ /* Number is greater than 1 */
-/* Convert significand to an integer and strip trailing decimal zeros. */
-	emov( y, u );
-	u[NE-1] = EXONE + NBITS - 1;
-
-	p = &etens[NTEN-4][0];
-	m = 16;
-do
-	{
-	ediv( p, u, t, ldp );
-	efloor( t, w, ldp );
-	for( j=0; j<NE-1; j++ )
-		{
-		if( t[j] != w[j] )
-			goto noint;
-		}
-	emov( t, u );
-	expon += (int )m;
-noint:
-	p += NE;
-	m >>= 1;
-	}
-while( m != 0 );
-
-/* Rescale from integer significand */
-	u[NE-1] += y[NE-1] - (unsigned int )(EXONE + NBITS - 1);
-	emov( u, y );
-/* Find power of 10 */
-	emov( eone, t );
-	m = MAXP;
-	p = &etens[0][0];
-	while( ecmp( ten, u ) <= 0 )
-		{
-		if( ecmp( p, u ) <= 0 )
-			{
-			ediv( p, u, u, ldp );
-			emul( p, t, t, ldp );
-			expon += (int )m;
-			}
-		m >>= 1;
-		if( m == 0 )
-			break;
-		p += NE;
-		}
-	}
-else
-	{ /* Number is less than 1.0 */
-/* Pad significand with trailing decimal zeros. */
-	if( y[NE-1] == 0 )
-		{
-		while( (y[NE-2] & 0x8000) == 0 )
-			{
-			emul( ten, y, y, ldp );
-			expon -= 1;
-			}
-		}
-	else
-		{
-		emovi( y, w );
-		for( i=0; i<NDEC+1; i++ )
-			{
-			if( (w[NI-1] & 0x7) != 0 )
-				break;
-/* multiply by 10 */
-			emovz( w, u );
-			eshdn1( u );
-			eshdn1( u );
-			eaddm( w, u );
-			u[1] += 3;
-			while( u[2] != 0 )
-				{
-				eshdn1(u);
-				u[1] += 1;
-				}
-			if( u[NI-1] != 0 )
-				break;
-			if( eone[NE-1] <= u[1] )
-				break;
-			emovz( u, w );
-			expon -= 1;
-			}
-		emovo( w, y, ldp );
-		}
-	k = -MAXP;
-	p = &emtens[0][0];
-	r = &etens[0][0];
-	emov( y, w );
-	emov( eone, t );
-	while( ecmp( eone, w ) > 0 )
-		{
-		if( ecmp( p, w ) >= 0 )
-			{
-			emul( r, w, w, ldp );
-			emul( r, t, t, ldp );
-			expon += k;
-			}
-		k /= 2;
-		if( k == 0 )
-			break;
-		p += NE;
-		r += NE;
-		}
-	ediv( t, eone, t, ldp );
-	}
-isone:
-/* Find the first (leading) digit. */
-emovi( t, w );
-emovz( w, t );
-emovi( y, w );
-emovz( w, y );
-eiremain( t, y, ldp );
-digit = equot[NI-1];
-while( (digit == 0) && (ecmp(y,ezero) != 0) )
-	{
-	eshup1( y );
-	emovz( y, u );
-	eshup1( u );
-	eshup1( u );
-	eaddm( u, y );
-	eiremain( t, y, ldp );
-	digit = equot[NI-1];
-	expon -= 1;
-	}
-s = string;
-if( sign )
-	*s++ = '-';
-else
-	*s++ = ' ';
-/* Examine number of digits requested by caller. */
-if( outformat == 3 )
-        ndigs += expon;
-/*
-else if( ndigs < 0 )
-        ndigs = 0;
-*/
-if( ndigs > NDEC )
-	ndigs = NDEC;
-if( digit == 10 )
-	{
-	*s++ = '1';
-	*s++ = '.';
-	if( ndigs > 0 )
-		{
-		*s++ = '0';
-		ndigs -= 1;
-		}
-	expon += 1;
-	if( ndigs < 0 )
-	        {
-	        ss = s;
-	        goto doexp;
-	        }
-	}
-else
-	{
-	*s++ = (char )digit + '0';
-	*s++ = '.';
-	}
-/* Generate digits after the decimal point. */
-for( k=0; k<=ndigs; k++ )
-	{
-/* multiply current number by 10, without normalizing */
-	eshup1( y );
-	emovz( y, u );
-	eshup1( u );
-	eshup1( u );
-	eaddm( u, y );
-	eiremain( t, y, ldp );
-	*s++ = (char )equot[NI-1] + '0';
-	}
-digit = equot[NI-1];
---s;
-ss = s;
-/* round off the ASCII string */
-if( digit > 4 )
-	{
-/* Test for critical rounding case in ASCII output. */
-	if( digit == 5 )
-		{
-		emovo( y, t, ldp );
-		if( ecmp(t,ezero) != 0 )
-			goto roun;	/* round to nearest */
-		if( (*(s-1) & 1) == 0 )
-			goto doexp;	/* round to even */
-		}
-/* Round up and propagate carry-outs */
-roun:
-	--s;
-	k = *s & 0x7f;
-/* Carry out to most significant digit? */
-	if( ndigs < 0 )
-		{
-	        /* This will print like "1E-6". */
-		*s = '1';
-		expon += 1;
-		goto doexp;
-		}
-	else if( k == '.' )
-		{
-		--s;
-		k = *s;
-		k += 1;
-		*s = (char )k;
-/* Most significant digit carries to 10? */
-		if( k > '9' )
-			{
-			expon += 1;
-			*s = '1';
-			}
-		goto doexp;
-		}
-/* Round up and carry out from less significant digits */
-	k += 1;
-	*s = (char )k;
-	if( k > '9' )
-		{
-		*s = '0';
-		goto roun;
-		}
-	}
-doexp:
-#ifdef __GO32__
-if( expon >= 0 )
-	sprintf( ss, "e+%02d", expon );
-else
-	sprintf( ss, "e-%02d", -expon );
-#else
-	sprintf( ss, "E%d", expon );
-#endif
-bxit:
-ldp->rndprc = rndsav;
-ldp->outexpon =  expon;
-}
-
-
-
-
-/*
-;								ASCTOQ
-;		ASCTOQ.MAC		LATEST REV: 11 JAN 84
-;					SLM, 3 JAN 78
-;
-;	Convert ASCII string to quadruple precision floating point
-;
-;		Numeric input is free field decimal number
-;		with max of 15 digits with or without 
-;		decimal point entered as ASCII from teletype.
-;	Entering E after the number followed by a second
-;	number causes the second number to be interpreted
-;	as a power of 10 to be multiplied by the first number
-;	(i.e., "scientific" notation).
-;
-;	Usage:
-;		asctoq( string, q );
-*/
-
-long double _strtold (char *s, char **se)
-{
-  long double x;
-  LDPARMS rnd;
-  LDPARMS *ldp = &rnd;
-  int lenldstr;
-
-  rnd.rlast = -1;
-  rnd.rndprc = NBITS;
-
-  lenldstr = asctoeg( s, (unsigned short *)&x, LDBL_MANT_DIG, ldp );
-  if (se)
-    *se = s + lenldstr;
-  return x;
-}
-
-#define REASONABLE_LEN 200
-
-static int
-asctoeg(char *ss, short unsigned int *y, int oprec, LDPARMS *ldp)
-{
-unsigned short yy[NI], xt[NI], tt[NI];
-int esign, decflg, sgnflg, nexp, exp, prec, lost;
-int k, trail, c, rndsav;
-long lexp;
-unsigned short nsign, *p;
-char *sp, *s, *lstr;
-int lenldstr;
-int mflag = 0;
-char tmpstr[REASONABLE_LEN];
-
-/* Copy the input string. */
-c = strlen (ss) + 2;
-if (c <= REASONABLE_LEN)
-  lstr = tmpstr;
-else
-  {
-    lstr = (char *) calloc (c, 1);
-    mflag = 1;
-  }
-s = ss;
-lenldstr = 0;
-while( *s == ' ' ) /* skip leading spaces */
-  {
-    ++s;
-    ++lenldstr;
-  }
-sp = lstr;
-for( k=0; k<c; k++ )
-	{
-	if( (*sp++ = *s++) == '\0' )
-		break;
-	}
-*sp = '\0';
-s = lstr;
-
-rndsav = ldp->rndprc;
-ldp->rndprc = NBITS; /* Set to full precision */
-lost = 0;
-nsign = 0;
-decflg = 0;
-sgnflg = 0;
-nexp = 0;
-exp = 0;
-prec = 0;
-ecleaz( yy );
-trail = 0;
-
-nxtcom:
-k = *s - '0';
-if( (k >= 0) && (k <= 9) )
-	{
-/* Ignore leading zeros */
-	if( (prec == 0) && (decflg == 0) && (k == 0) )
-		goto donchr;
-/* Identify and strip trailing zeros after the decimal point. */
-	if( (trail == 0) && (decflg != 0) )
-		{
-		sp = s;
-		while( (*sp >= '0') && (*sp <= '9') )
-			++sp;
-/* Check for syntax error */
-		c = *sp & 0x7f;
-		if( (c != 'e') && (c != 'E') && (c != '\0')
-			&& (c != '\n') && (c != '\r') && (c != ' ')
-			&& (c != ',') )
-			goto error;
-		--sp;
-		while( *sp == '0' )
-			*sp-- = 'z';
-		trail = 1;
-		if( *s == 'z' )
-			goto donchr;
-		}
-/* If enough digits were given to more than fill up the yy register,
- * continuing until overflow into the high guard word yy[2]
- * guarantees that there will be a roundoff bit at the top
- * of the low guard word after normalization.
- */
-	if( yy[2] == 0 )
-		{
-		if( decflg )
-			nexp += 1; /* count digits after decimal point */
-		eshup1( yy );	/* multiply current number by 10 */
-		emovz( yy, xt );
-		eshup1( xt );
-		eshup1( xt );
-		eaddm( xt, yy );
-		ecleaz( xt );
-		xt[NI-2] = (unsigned short )k;
-		eaddm( xt, yy );
-		}
-	else
-		{
-		/* Mark any lost non-zero digit.  */
-		lost |= k;
-		/* Count lost digits before the decimal point.  */
-		if (decflg == 0)
-		        nexp -= 1;
-		}
-	prec += 1;
-	goto donchr;
-	}
-
-switch( *s )
-	{
-	case 'z':
-		break;
-	case 'E':
-	case 'e':
-		goto expnt;
-	case '.':	/* decimal point */
-		if( decflg )
-			goto error;
-		++decflg;
-		break;
-	case '-':
-		nsign = 0xffff;
-		if( sgnflg )
-			goto error;
-		++sgnflg;
-		break;
-	case '+':
-		if( sgnflg )
-			goto error;
-		++sgnflg;
-		break;
-	case ',':
-	case ' ':
-	case '\0':
-	case '\n':
-	case '\r':
-		goto daldone;
-	case 'i':
-	case 'I':
-		goto infinite;
-	default:
-	error:
-#ifdef NANS
-		enan( yy, NI*16 );
-#else
-		mtherr( "asctoe", DOMAIN );
-		ecleaz(yy);
-#endif
-		goto aexit;
-	}
-donchr:
-++s;
-goto nxtcom;
-
-/* Exponent interpretation */
-expnt:
-
-esign = 1;
-exp = 0;
-++s;
-/* check for + or - */
-if( *s == '-' )
-	{
-	esign = -1;
-	++s;
-	}
-if( *s == '+' )
-	++s;
-while( (*s >= '0') && (*s <= '9') )
-	{
-	exp *= 10;
-	exp += *s++ - '0';
-	if (exp > 4977)
-		{
-		if (esign < 0)
-			goto zero;
-		else
-			goto infinite;
-		}
-	}
-if( esign < 0 )
-	exp = -exp;
-if( exp > 4932 )
-	{
-infinite:
-	ecleaz(yy);
-	yy[E] = 0x7fff;  /* infinity */
-	goto aexit;
-	}
-if( exp < -4977 )
-	{
-zero:
-	ecleaz(yy);
-	goto aexit;
-	}
-
-daldone:
-nexp = exp - nexp;
-/* Pad trailing zeros to minimize power of 10, per IEEE spec. */
-while( (nexp > 0) && (yy[2] == 0) )
-	{
-	emovz( yy, xt );
-	eshup1( xt );
-	eshup1( xt );
-	eaddm( yy, xt );
-	eshup1( xt );
-	if( xt[2] != 0 )
-		break;
-	nexp -= 1;
-	emovz( xt, yy );
-	}
-if( (k = enormlz(yy)) > NBITS )
-	{
-	ecleaz(yy);
-	goto aexit;
-	}
-lexp = (EXONE - 1 + NBITS) - k;
-emdnorm( yy, lost, 0, lexp, 64, ldp );
-/* convert to external format */
-
-
-/* Multiply by 10**nexp.  If precision is 64 bits,
- * the maximum relative error incurred in forming 10**n
- * for 0 <= n <= 324 is 8.2e-20, at 10**180.
- * For 0 <= n <= 999, the peak relative error is 1.4e-19 at 10**947.
- * For 0 >= n >= -999, it is -1.55e-19 at 10**-435.
- */
-lexp = yy[E];
-if( nexp == 0 )
-	{
-	k = 0;
-	goto expdon;
-	}
-esign = 1;
-if( nexp < 0 )
-	{
-	nexp = -nexp;
-	esign = -1;
-	if( nexp > 4096 )
-		{ /* Punt.  Can't handle this without 2 divides. */
-		emovi( etens[0], tt );
-		lexp -= tt[E];
-		k = edivm( tt, yy, ldp );
-		lexp += EXONE;
-		nexp -= 4096;
-		}
-	}
-p = &etens[NTEN][0];
-emov( eone, xt );
-exp = 1;
-do
-	{
-	if( exp & nexp )
-		emul( p, xt, xt, ldp );
-	p -= NE;
-	exp = exp + exp;
-	}
-while( exp <= MAXP );
-
-emovi( xt, tt );
-if( esign < 0 )
-	{
-	lexp -= tt[E];
-	k = edivm( tt, yy, ldp );
-	lexp += EXONE;
-	}
-else
-	{
-	lexp += tt[E];
-	k = emulm( tt, yy, ldp );
-	lexp -= EXONE - 1;
-	}
-
-expdon:
-
-/* Round and convert directly to the destination type */
-if( oprec == 53 )
-	lexp -= EXONE - 0x3ff;
-else if( oprec == 24 )
-	lexp -= EXONE - 0177;
-#ifdef DEC
-else if( oprec == 56 )
-	lexp -= EXONE - 0201;
-#endif
-ldp->rndprc = oprec;
-emdnorm( yy, k, 0, lexp, 64, ldp );
-
-aexit:
-
-ldp->rndprc = rndsav;
-yy[0] = nsign;
-switch( oprec )
-	{
-#ifdef DEC
-	case 56:
-		todec( yy, y ); /* see etodec.c */
-		break;
-#endif
-#if LDBL_MANT_DIG == 53
-	case 53:
-		toe53( yy, y );
-		break;
-#elif LDBL_MANT_DIG == 24
-	case 24:
-		toe24( yy, y );
-		break;
-#elif LDBL_MANT_DIG == 64
-	case 64:
-		toe64( yy, y );
-		break;
-#elif LDBL_MANT_DIG == 113
-	case 113:
-		toe113( yy, y );
-		break;
-#else
-	case NBITS:
-		emovo( yy, y, ldp );
-		break;
-#endif
-	}
-lenldstr += s - lstr;
-if (mflag)
-  free (lstr);
-return lenldstr;
-}
-
-
- 
-/* y = largest integer not greater than x
- * (truncated toward minus infinity)
- *
- * unsigned short x[NE], y[NE]
- * LDPARMS *ldp
- *
- * efloor( x, y, ldp );
- */
-static unsigned short bmask[] = {
-0xffff,
-0xfffe,
-0xfffc,
-0xfff8,
-0xfff0,
-0xffe0,
-0xffc0,
-0xff80,
-0xff00,
-0xfe00,
-0xfc00,
-0xf800,
-0xf000,
-0xe000,
-0xc000,
-0x8000,
-0x0000,
-};
-
-static void efloor(short unsigned int *x, short unsigned int *y, LDPARMS *ldp)
-{
-register unsigned short *p;
-int e, expon, i;
-unsigned short f[NE];
-
-emov( x, f ); /* leave in external format */
-expon = (int )f[NE-1];
-e = (expon & 0x7fff) - (EXONE - 1);
-if( e <= 0 )
-	{
-	eclear(y);
-	goto isitneg;
-	}
-/* number of bits to clear out */
-e = NBITS - e;
-emov( f, y );
-if( e <= 0 )
-	return;
-
-p = &y[0];
-while( e >= 16 )
-	{
-	*p++ = 0;
-	e -= 16;
-	}
-/* clear the remaining bits */
-*p &= bmask[e];
-/* truncate negatives toward minus infinity */
-isitneg:
-
-if( (unsigned short )expon & (unsigned short )0x8000 )
-	{
-	for( i=0; i<NE-1; i++ )
-		{
-		if( f[i] != y[i] )
-			{
-			esub( eone, y, y, ldp );
-			break;
-			}
-		}
-	}
-}
-
-
-
-static void eiremain(short unsigned int *den, short unsigned int *num, LDPARMS *ldp)
-{
-long ld, ln;
-unsigned short j;
- unsigned short *equot = ldp->equot;
-
-ld = den[E];
-ld -= enormlz( den );
-ln = num[E];
-ln -= enormlz( num );
-ecleaz( equot );
-while( ln >= ld )
-	{
-	if( ecmpm(den,num) <= 0 )
-		{
-		esubm(den, num);
-		j = 1;
-		}
-	else
-		{
-		j = 0;
-		}
-	eshup1(equot);
-	equot[NI-1] |= j;
-	eshup1(num);
-	ln -= 1;
-	}
-emdnorm( num, 0, 0, ln, 0, ldp );
-}
-
-/* NaN bit patterns
- */
-#ifdef MIEEE
-static unsigned short nan113[8] = {
-  0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan64[6] = {0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan53[4] = {0x7fff, 0xffff, 0xffff, 0xffff};
-static unsigned short nan24[2] = {0x7fff, 0xffff};
-#else /* !MIEEE */
-static unsigned short nan113[8] = {0, 0, 0, 0, 0, 0, 0x8000, 0x7fff};
-static unsigned short nan64[6] = {0, 0, 0, 0, 0xc000, 0x7fff};
-static unsigned short nan53[4] = {0, 0, 0, 0x7ff8};
-static unsigned short nan24[2] = {0, 0x7fc0};
-#endif /* !MIEEE */
-
-
-static void enan (short unsigned int *nan, int size)
-{
-int i, n;
-unsigned short *p;
-
-switch( size )
-	{
-#ifndef DEC
-	case 113:
-	n = 8;
-	p = nan113;
-	break;
-
-	case 64:
-	n = 6;
-	p = nan64;
-	break;
-
-	case 53:
-	n = 4;
-	p = nan53;
-	break;
-
-	case 24:
-	n = 2;
-	p = nan24;
-	break;
-
-	case NBITS:
-	for( i=0; i<NE-2; i++ )
-		*nan++ = 0;
-	*nan++ = 0xc000;
-	*nan++ = 0x7fff;
-	return;
-
-	case NI*16:
-	*nan++ = 0;
-	*nan++ = 0x7fff;
-	*nan++ = 0;
-	*nan++ = 0xc000;
-	for( i=4; i<NI; i++ )
-		*nan++ = 0;
-	return;
-#endif
-	default:
-	mtherr( "enan", DOMAIN );
-	return;
-	}
-for (i=0; i < n; i++)
-	*nan++ = *p++;
-}
-
-
-
-
diff --git a/newlib/libc/stdlib/llabs.c b/newlib/libc/stdlib/llabs.c
deleted file mode 100644
index 11246c354..000000000
--- a/newlib/libc/stdlib/llabs.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-FUNCTION
-<<llabs>>---compute the absolute value of an long long integer.
-
-INDEX
-        llabs
-
-ANSI_SYNOPSIS
-        #include <stdlib.h>
-        long long llabs(long long j);
-
-TRAD_SYNOPSIS
-        #include <stdlib.h>
-        long long llabs(<[j]>)
-        long long <[j]>;
-
-DESCRIPTION
-The <<llabs>> function computes the absolute value of the long long integer 
-argument <[j]> (also called the magnitude of <[j]>).
-
-The similar function <<labs>> uses and returns <<long>> rather than
-<<long long>> values.
-
-RETURNS
-A nonnegative long long integer.
-
-PORTABILITY
-<<llabs>> is ISO 9899 (C99) compatable.
-
-No supporting OS subroutines are required.
-*/
-
-/*-
- * Copyright (c) 2001 Mike Barcroft <mike@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <stdlib.h>
-
-long long
-_DEFUN(llabs, (j),
-       long long j)
-{
-	return (j < 0 ? -j : j);
-}
diff --git a/newlib/libc/stdlib/lldiv.c b/newlib/libc/stdlib/lldiv.c
deleted file mode 100644
index 6b853e4b6..000000000
--- a/newlib/libc/stdlib/lldiv.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
-FUNCTION
-<<lldiv>>---divide two long long integers
-
-INDEX
-        lldiv
-
-ANSI_SYNOPSIS
-        #include <stdlib.h>
-        lldiv_t lldiv(long long <[n]>, long long <[d]>);
-
-TRAD_SYNOPSIS
-        #include <stdlib.h>
-        lldiv_t lldiv(<[n]>, <[d]>)
-        long long <[n]>, <[d]>;
-
-DESCRIPTION
-Divide
-@tex
-$n/d$,
-@end tex
-@ifnottex
-<[n]>/<[d]>,
-@end ifnottex
-returning quotient and remainder as two long long integers in a structure 
-<<lldiv_t>>.
-
-RETURNS
-The result is represented with the structure
-
-. typedef struct
-. {
-.  long long quot;
-.  long long rem;
-. } lldiv_t;
-
-where the <<quot>> field represents the quotient, and <<rem>> the
-remainder.  For nonzero <[d]>, if `<<<[r]> = ldiv(<[n]>,<[d]>);>>' then
-<[n]> equals `<<<[r]>.rem + <[d]>*<[r]>.quot>>'.
-
-To divide <<long>> rather than <<long long>> values, use the similar
-function <<ldiv>>.
-
-PORTABILITY
-<<lldiv>> is ISO 9899 (C99) compatable.
-
-No supporting OS subroutines are required.
-*/
-
-/*-
- * Copyright (c) 2001 Mike Barcroft <mike@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <stdlib.h>
-
-/*
- * The ANSI standard says that |r.quot| <= |n/d|, where
- * n/d is to be computed in infinite precision.  In other
- * words, we should always truncate the quotient towards
- * 0, never -infinity.
- *
- * Machine division and remainer may work either way when
- * one or both of n or d is negative.  If only one is
- * negative and r.quot has been truncated towards -inf,
- * r.rem will have the same sign as denom and the opposite
- * sign of num; if both are negative and r.quot has been
- * truncated towards -inf, r.rem will be positive (will
- * have the opposite sign of num).  These are considered
- * `wrong'.
- *
- * If both are num and denom are positive, r will always
- * be positive.
- *
- * This all boils down to:
- *      if num >= 0, but r.rem < 0, we got the wrong answer.
- * In that case, to get the right answer, add 1 to r.quot and
- * subtract denom from r.rem.
- */
-lldiv_t
-_DEFUN (lldiv, (number, denom), 
-       long long numer _AND long long denom)
-{
-	lldiv_t retval;
-
-	retval.quot = numer / denom;
-	retval.rem = numer % denom;
-	if (numer >= 0 && retval.rem < 0) {
-		retval.quot++;
-		retval.rem -= denom;
-	}
-	return (retval);
-}
-
diff --git a/newlib/libc/stdlib/local.h b/newlib/libc/stdlib/local.h
deleted file mode 100644
index a274f20a1..000000000
--- a/newlib/libc/stdlib/local.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* Misc. local definitions for libc/stdlib */
-
-#ifndef _LOCAL_H_
-#define _LOCAL_H_
-
-char *	_EXFUN(_gcvt,(struct _reent *, double , int , char *, char, int));
-
-#endif
diff --git a/newlib/libc/stdlib/lrand48.c b/newlib/libc/stdlib/lrand48.c
deleted file mode 100644
index bfc693b75..000000000
--- a/newlib/libc/stdlib/lrand48.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-long
-_DEFUN (_lrand48_r, (r),
-       struct _reent *r)
-{
-  _REENT_CHECK_RAND48(r);
-  __dorand48(r, __rand48_seed);
-  return (long)((unsigned long) __rand48_seed[2] << 15) +
-    ((unsigned long) __rand48_seed[1] >> 1);
-}
-
-#ifndef _REENT_ONLY
-long
-_DEFUN_VOID (lrand48)
-{
-  return _lrand48_r (_REENT);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/malign.c b/newlib/libc/stdlib/malign.c
deleted file mode 100644
index 1eded306b..000000000
--- a/newlib/libc/stdlib/malign.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef MALLOC_PROVIDED
-/* malign.c -- a wrapper for memalign_r.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (memalign, (align, nbytes),
-	size_t align _AND
-	size_t nbytes)
-{
-  return _memalign_r (_REENT, align, nbytes);
-}
-
-#endif
-#endif
diff --git a/newlib/libc/stdlib/malloc.c b/newlib/libc/stdlib/malloc.c
deleted file mode 100644
index 83453ab8d..000000000
--- a/newlib/libc/stdlib/malloc.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/* VxWorks provides its own version of malloc, and we can't use this
-   one because VxWorks does not provide sbrk.  So we have a hook to
-   not compile this code.  */
-
-/* The routines here are simple cover fns to the routines that do the real
-   work (the reentrant versions).  */
-/* FIXME: Does the warning below (see WARNINGS) about non-reentrancy still
-   apply?  A first guess would be "no", but how about reentrancy in the *same*
-   thread?  */
-
-#ifdef MALLOC_PROVIDED
-
-int _dummy_malloc = 1;
-
-#else
-
-/*
-FUNCTION
-<<malloc>>, <<realloc>>, <<free>>---manage memory
-
-INDEX
-	malloc
-INDEX
-	realloc
-INDEX
-	free
-INDEX
-	memalign
-INDEX
-	malloc_usable_size
-INDEX
-	_malloc_r
-INDEX
-	_realloc_r
-INDEX
-	_free_r
-INDEX
-	_memalign_r
-INDEX
-	_malloc_usable_size_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	void *malloc(size_t <[nbytes]>);
-	void *realloc(void *<[aptr]>, size_t <[nbytes]>);
-	void free(void *<[aptr]>);
-
-	void *memalign(size_t <[align]>, size_t <[nbytes]>);
-
-	size_t malloc_usable_size(void *<[aptr]>);
-
-	void *_malloc_r(void *<[reent]>, size_t <[nbytes]>);
-	void *_realloc_r(void *<[reent]>, 
-                         void *<[aptr]>, size_t <[nbytes]>);
-	void _free_r(void *<[reent]>, void *<[aptr]>);
-
-	void *_memalign_r(void *<[reent]>,
-			  size_t <[align]>, size_t <[nbytes]>);
-
-	size_t _malloc_usable_size_r(void *<[reent]>, void *<[aptr]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	char *malloc(<[nbytes]>)
-	size_t <[nbytes]>;
-
-	char *realloc(<[aptr]>, <[nbytes]>)
-	char *<[aptr]>;
-	size_t <[nbytes]>;
-
-	void free(<[aptr]>)
-	char *<[aptr]>;
-
-	char *memalign(<[align]>, <[nbytes]>)
-	size_t <[align]>;
-	size_t <[nbytes]>;
-
-	size_t malloc_usable_size(<[aptr]>)
-	char *<[aptr]>;
-
-	char *_malloc_r(<[reent]>,<[nbytes]>)
-	char *<[reent]>;
-	size_t <[nbytes]>;
-
-	char *_realloc_r(<[reent]>, <[aptr]>, <[nbytes]>)
-	char *<[reent]>;
-	char *<[aptr]>;
-	size_t <[nbytes]>;
-
-	void _free_r(<[reent]>, <[aptr]>)
-	char *<[reent]>;
-	char *<[aptr]>;
-
-	char *_memalign_r(<[reent]>, <[align]>, <[nbytes]>)
-	char *<[reent]>;
-	size_t <[align]>;
-	size_t <[nbytes]>;
-
-	size_t malloc_usable_size(<[reent]>, <[aptr]>)
-	char *<[reent]>;
-	char *<[aptr]>;
-
-DESCRIPTION
-These functions manage a pool of system memory.
-
-Use <<malloc>> to request allocation of an object with at least
-<[nbytes]> bytes of storage available.  If the space is available,
-<<malloc>> returns a pointer to a newly allocated block as its result.
-
-If you already have a block of storage allocated by <<malloc>>, but
-you no longer need all the space allocated to it, you can make it
-smaller by calling <<realloc>> with both the object pointer and the
-new desired size as arguments.  <<realloc>> guarantees that the
-contents of the smaller object match the beginning of the original object.
-
-Similarly, if you need more space for an object, use <<realloc>> to
-request the larger size; again, <<realloc>> guarantees that the
-beginning of the new, larger object matches the contents of the
-original object.
-
-When you no longer need an object originally allocated by <<malloc>>
-or <<realloc>> (or the related function <<calloc>>), return it to the
-memory storage pool by calling <<free>> with the address of the object
-as the argument.  You can also use <<realloc>> for this purpose by
-calling it with <<0>> as the <[nbytes]> argument.
-
-The <<memalign>> function returns a block of size <[nbytes]> aligned
-to a <[align]> boundary.  The <[align]> argument must be a power of
-two.
-
-The <<malloc_usable_size>> function takes a pointer to a block
-allocated by <<malloc>>.  It returns the amount of space that is
-available in the block.  This may or may not be more than the size
-requested from <<malloc>>, due to alignment or minimum size
-constraints.
-
-The alternate functions <<_malloc_r>>, <<_realloc_r>>, <<_free_r>>,
-<<_memalign_r>>, and <<_malloc_usable_size_r>> are reentrant versions.
-The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-If you have multiple threads of execution which may call any of these
-routines, or if any of these routines may be called reentrantly, then
-you must provide implementations of the <<__malloc_lock>> and
-<<__malloc_unlock>> functions for your system.  See the documentation
-for those functions.
-
-These functions operate by calling the function <<_sbrk_r>> or
-<<sbrk>>, which allocates space.  You may need to provide one of these
-functions for your system.  <<_sbrk_r>> is called with a positive
-value to allocate more space, and with a negative value to release
-previously allocated space if it is no longer required.
-@xref{Stubs}.
-
-RETURNS
-<<malloc>> returns a pointer to the newly allocated space, if
-successful; otherwise it returns <<NULL>>.  If your application needs
-to generate empty objects, you may use <<malloc(0)>> for this purpose.
-
-<<realloc>> returns a pointer to the new block of memory, or <<NULL>>
-if a new block could not be allocated.  <<NULL>> is also the result
-when you use `<<realloc(<[aptr]>,0)>>' (which has the same effect as
-`<<free(<[aptr]>)>>').  You should always check the result of
-<<realloc>>; successful reallocation is not guaranteed even when
-you request a smaller object.
-
-<<free>> does not return a result.
-
-<<memalign>> returns a pointer to the newly allocated space.
-
-<<malloc_usable_size>> returns the usable size.
-
-PORTABILITY
-<<malloc>>, <<realloc>>, and <<free>> are specified by the ANSI C
-standard, but other conforming implementations of <<malloc>> may
-behave differently when <[nbytes]> is zero.
-
-<<memalign>> is part of SVR4.
-
-<<malloc_usable_size>> is not portable.
-
-Supporting OS subroutines required: <<sbrk>>.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (malloc, (nbytes),
-	size_t nbytes)		/* get a block */
-{
-  return _malloc_r (_REENT, nbytes);
-}
-
-void
-_DEFUN (free, (aptr),
-	_PTR aptr)
-{
-  _free_r (_REENT, aptr);
-}
-
-#endif
-
-#endif /* ! defined (MALLOC_PROVIDED) */
diff --git a/newlib/libc/stdlib/mallocr.c b/newlib/libc/stdlib/mallocr.c
deleted file mode 100644
index 08a3b00fd..000000000
--- a/newlib/libc/stdlib/mallocr.c
+++ /dev/null
@@ -1,3674 +0,0 @@
-#ifdef MALLOC_PROVIDED
-int _dummy_mallocr = 1;
-#else
-/* ---------- To make a malloc.h, start cutting here ------------ */
-
-/* 
-  A version of malloc/free/realloc written by Doug Lea and released to the 
-  public domain.  Send questions/comments/complaints/performance data
-  to dl@cs.oswego.edu
-
-* VERSION 2.6.4  Thu Nov 28 07:54:55 1996  Doug Lea  (dl at gee)
-  
-   Note: There may be an updated version of this malloc obtainable at
-           ftp://g.oswego.edu/pub/misc/malloc.c
-         Check before installing!
-
-* Why use this malloc?
-
-  This is not the fastest, most space-conserving, most portable, or
-  most tunable malloc ever written. However it is among the fastest
-  while also being among the most space-conserving, portable and tunable.
-  Consistent balance across these factors results in a good general-purpose 
-  allocator. For a high-level description, see 
-     http://g.oswego.edu/dl/html/malloc.html
-
-* Synopsis of public routines
-
-  (Much fuller descriptions are contained in the program documentation below.)
-
-  malloc(size_t n);
-     Return a pointer to a newly allocated chunk of at least n bytes, or null
-     if no space is available.
-  free(Void_t* p);
-     Release the chunk of memory pointed to by p, or no effect if p is null.
-  realloc(Void_t* p, size_t n);
-     Return a pointer to a chunk of size n that contains the same data
-     as does chunk p up to the minimum of (n, p's size) bytes, or null
-     if no space is available. The returned pointer may or may not be
-     the same as p. If p is null, equivalent to malloc.  Unless the
-     #define REALLOC_ZERO_BYTES_FREES below is set, realloc with a
-     size argument of zero (re)allocates a minimum-sized chunk.
-  memalign(size_t alignment, size_t n);
-     Return a pointer to a newly allocated chunk of n bytes, aligned
-     in accord with the alignment argument, which must be a power of
-     two.
-  valloc(size_t n);
-     Equivalent to memalign(pagesize, n), where pagesize is the page
-     size of the system (or as near to this as can be figured out from
-     all the includes/defines below.)
-  pvalloc(size_t n);
-     Equivalent to valloc(minimum-page-that-holds(n)), that is,
-     round up n to nearest pagesize.
-  calloc(size_t unit, size_t quantity);
-     Returns a pointer to quantity * unit bytes, with all locations
-     set to zero.
-  cfree(Void_t* p);
-     Equivalent to free(p).
-  malloc_trim(size_t pad);
-     Release all but pad bytes of freed top-most memory back 
-     to the system. Return 1 if successful, else 0.
-  malloc_usable_size(Void_t* p);
-     Report the number usable allocated bytes associated with allocated
-     chunk p. This may or may not report more bytes than were requested,
-     due to alignment and minimum size constraints.
-  malloc_stats();
-     Prints brief summary statistics on stderr.
-  mallinfo()
-     Returns (by copy) a struct containing various summary statistics.
-  mallopt(int parameter_number, int parameter_value)
-     Changes one of the tunable parameters described below. Returns
-     1 if successful in changing the parameter, else 0.
-
-* Vital statistics:
-
-  Alignment:                            8-byte
-       8 byte alignment is currently hardwired into the design.  This
-       seems to suffice for all current machines and C compilers.
-
-  Assumed pointer representation:       4 or 8 bytes
-       Code for 8-byte pointers is untested by me but has worked
-       reliably by Wolfram Gloger, who contributed most of the
-       changes supporting this.
-
-  Assumed size_t  representation:       4 or 8 bytes
-       Note that size_t is allowed to be 4 bytes even if pointers are 8.        
-
-  Minimum overhead per allocated chunk: 4 or 8 bytes
-       Each malloced chunk has a hidden overhead of 4 bytes holding size
-       and status information.  
-
-  Minimum allocated size: 4-byte ptrs:  16 bytes    (including 4 overhead)
-                          8-byte ptrs:  24/32 bytes (including, 4/8 overhead)
-                                     
-       When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte
-       ptrs but 4 byte size) or 24 (for 8/8) additional bytes are 
-       needed; 4 (8) for a trailing size field
-       and 8 (16) bytes for free list pointers. Thus, the minimum
-       allocatable size is 16/24/32 bytes.
-
-       Even a request for zero bytes (i.e., malloc(0)) returns a
-       pointer to something of the minimum allocatable size.
-
-  Maximum allocated size: 4-byte size_t: 2^31 -  8 bytes
-                          8-byte size_t: 2^63 - 16 bytes
-
-       It is assumed that (possibly signed) size_t bit values suffice to
-       represent chunk sizes. `Possibly signed' is due to the fact
-       that `size_t' may be defined on a system as either a signed or
-       an unsigned type. To be conservative, values that would appear
-       as negative numbers are avoided.  
-       Requests for sizes with a negative sign bit will return a
-       minimum-sized chunk.
-
-  Maximum overhead wastage per allocated chunk: normally 15 bytes
-
-       Alignnment demands, plus the minimum allocatable size restriction
-       make the normal worst-case wastage 15 bytes (i.e., up to 15
-       more bytes will be allocated than were requested in malloc), with 
-       two exceptions:
-         1. Because requests for zero bytes allocate non-zero space,
-            the worst case wastage for a request of zero bytes is 24 bytes.
-         2. For requests >= mmap_threshold that are serviced via
-            mmap(), the worst case wastage is 8 bytes plus the remainder
-            from a system page (the minimal mmap unit); typically 4096 bytes.
-
-* Limitations
-
-    Here are some features that are NOT currently supported
-
-    * No user-definable hooks for callbacks and the like.
-    * No automated mechanism for fully checking that all accesses
-      to malloced memory stay within their bounds.
-    * No support for compaction.
-
-* Synopsis of compile-time options:
-
-    People have reported using previous versions of this malloc on all
-    versions of Unix, sometimes by tweaking some of the defines
-    below. It has been tested most extensively on Solaris and
-    Linux. It is also reported to work on WIN32 platforms.
-    People have also reported adapting this malloc for use in
-    stand-alone embedded systems.
-
-    The implementation is in straight, hand-tuned ANSI C.  Among other
-    consequences, it uses a lot of macros.  Because of this, to be at
-    all usable, this code should be compiled using an optimizing compiler
-    (for example gcc -O2) that can simplify expressions and control
-    paths.
-
-  __STD_C                  (default: derived from C compiler defines)
-     Nonzero if using ANSI-standard C compiler, a C++ compiler, or
-     a C compiler sufficiently close to ANSI to get away with it.
-  DEBUG                    (default: NOT defined)
-     Define to enable debugging. Adds fairly extensive assertion-based 
-     checking to help track down memory errors, but noticeably slows down
-     execution.
-  SEPARATE_OBJECTS	   (default: NOT defined)
-     Define this to compile into separate .o files.  You must then
-     compile malloc.c several times, defining a DEFINE_* macro each
-     time.  The list of DEFINE_* macros appears below.
-  MALLOC_LOCK		   (default: NOT defined)
-  MALLOC_UNLOCK		   (default: NOT defined)
-     Define these to C expressions which are run to lock and unlock
-     the malloc data structures.  Calls may be nested; that is,
-     MALLOC_LOCK may be called more than once before the corresponding
-     MALLOC_UNLOCK calls.  MALLOC_LOCK must avoid waiting for a lock
-     that it already holds.
-  MALLOC_ALIGNMENT          (default: NOT defined)
-     Define this to 16 if you need 16 byte alignment instead of 8 byte alignment
-     which is the normal default.
-  REALLOC_ZERO_BYTES_FREES (default: NOT defined) 
-     Define this if you think that realloc(p, 0) should be equivalent
-     to free(p). Otherwise, since malloc returns a unique pointer for
-     malloc(0), so does realloc(p, 0).
-  HAVE_MEMCPY               (default: defined)
-     Define if you are not otherwise using ANSI STD C, but still 
-     have memcpy and memset in your C library and want to use them.
-     Otherwise, simple internal versions are supplied.
-  USE_MEMCPY               (default: 1 if HAVE_MEMCPY is defined, 0 otherwise)
-     Define as 1 if you want the C library versions of memset and
-     memcpy called in realloc and calloc (otherwise macro versions are used). 
-     At least on some platforms, the simple macro versions usually
-     outperform libc versions.
-  HAVE_MMAP                 (default: defined as 1)
-     Define to non-zero to optionally make malloc() use mmap() to
-     allocate very large blocks.  
-  HAVE_MREMAP                 (default: defined as 0 unless Linux libc set)
-     Define to non-zero to optionally make realloc() use mremap() to
-     reallocate very large blocks.  
-  malloc_getpagesize        (default: derived from system #includes)
-     Either a constant or routine call returning the system page size.
-  HAVE_USR_INCLUDE_MALLOC_H (default: NOT defined) 
-     Optionally define if you are on a system with a /usr/include/malloc.h
-     that declares struct mallinfo. It is not at all necessary to
-     define this even if you do, but will ensure consistency.
-  INTERNAL_SIZE_T           (default: size_t)
-     Define to a 32-bit type (probably `unsigned int') if you are on a 
-     64-bit machine, yet do not want or need to allow malloc requests of 
-     greater than 2^31 to be handled. This saves space, especially for
-     very small chunks.
-  INTERNAL_LINUX_C_LIB      (default: NOT defined)
-     Defined only when compiled as part of Linux libc.
-     Also note that there is some odd internal name-mangling via defines
-     (for example, internally, `malloc' is named `mALLOc') needed
-     when compiling in this case. These look funny but don't otherwise
-     affect anything.
-  INTERNAL_NEWLIB	    (default: NOT defined)
-     Defined only when compiled as part of the Cygnus newlib
-     distribution.
-  WIN32                     (default: undefined)
-     Define this on MS win (95, nt) platforms to compile in sbrk emulation.
-  LACKS_UNISTD_H            (default: undefined)
-     Define this if your system does not have a <unistd.h>.
-  MORECORE                  (default: sbrk)
-     The name of the routine to call to obtain more memory from the system.
-  MORECORE_FAILURE          (default: -1)
-     The value returned upon failure of MORECORE.
-  MORECORE_CLEARS           (default 1)
-     True (1) if the routine mapped to MORECORE zeroes out memory (which
-     holds for sbrk).
-  DEFAULT_TRIM_THRESHOLD
-  DEFAULT_TOP_PAD       
-  DEFAULT_MMAP_THRESHOLD
-  DEFAULT_MMAP_MAX      
-     Default values of tunable parameters (described in detail below)
-     controlling interaction with host system routines (sbrk, mmap, etc).
-     These values may also be changed dynamically via mallopt(). The
-     preset defaults are those that give best performance for typical
-     programs/systems.
-
-
-*/
-
-
-
-
-/* Preliminaries */
-
-#ifndef __STD_C
-#ifdef __STDC__
-#define __STD_C     1
-#else
-#if __cplusplus
-#define __STD_C     1
-#else
-#define __STD_C     0
-#endif /*__cplusplus*/
-#endif /*__STDC__*/
-#endif /*__STD_C*/
-
-#ifndef Void_t
-#if __STD_C
-#define Void_t      void
-#else
-#define Void_t      char
-#endif
-#endif /*Void_t*/
-
-#if __STD_C
-#include <stddef.h>   /* for size_t */
-#else
-#include <sys/types.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdio.h>    /* needed for malloc_stats */
-#include <limits.h>   /* needed for overflow checks */
-
-#ifdef WIN32
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-#endif
-
-/*
-  Compile-time options
-*/
-
-
-/*
-
-  Special defines for Cygnus newlib distribution.
-
- */
-
-#ifdef INTERNAL_NEWLIB
-
-#include <sys/config.h>
-
-/*
-  In newlib, all the publically visible routines take a reentrancy
-  pointer.  We don't currently do anything much with it, but we do
-  pass it to the lock routine.
- */
-
-#include <reent.h>
-
-#define POINTER_UINT unsigned _POINTER_INT
-#define SEPARATE_OBJECTS
-#define HAVE_MMAP 0
-#define MORECORE(size) _sbrk_r(reent_ptr, (size))
-#define MORECORE_CLEARS 0
-#define MALLOC_LOCK __malloc_lock(reent_ptr)
-#define MALLOC_UNLOCK __malloc_unlock(reent_ptr)
-
-#ifdef __CYGWIN__
-# undef _WIN32
-# undef WIN32
-#endif
-
-#ifndef _WIN32
-#ifdef SMALL_MEMORY
-#define malloc_getpagesize (128)
-#else
-#define malloc_getpagesize (4096)
-#endif
-#endif
-
-#if __STD_C
-extern void __malloc_lock(struct _reent *);
-extern void __malloc_unlock(struct _reent *);
-#else
-extern void __malloc_lock();
-extern void __malloc_unlock();
-#endif
-
-#if __STD_C
-#define RARG struct _reent *reent_ptr,
-#define RONEARG struct _reent *reent_ptr
-#else
-#define RARG reent_ptr
-#define RONEARG reent_ptr
-#define RDECL struct _reent *reent_ptr;
-#endif
-
-#define RCALL reent_ptr,
-#define RONECALL reent_ptr
-
-#else /* ! INTERNAL_NEWLIB */
-
-#define POINTER_UINT unsigned long
-#define RARG
-#define RONEARG
-#define RDECL
-#define RCALL
-#define RONECALL
-
-#endif /* ! INTERNAL_NEWLIB */
-
-/*
-    Debugging:
-
-    Because freed chunks may be overwritten with link fields, this
-    malloc will often die when freed memory is overwritten by user
-    programs.  This can be very effective (albeit in an annoying way)
-    in helping track down dangling pointers.
-
-    If you compile with -DDEBUG, a number of assertion checks are
-    enabled that will catch more memory errors. You probably won't be
-    able to make much sense of the actual assertion errors, but they
-    should help you locate incorrectly overwritten memory.  The
-    checking is fairly extensive, and will slow down execution
-    noticeably. Calling malloc_stats or mallinfo with DEBUG set will
-    attempt to check every non-mmapped allocated and free chunk in the
-    course of computing the summmaries. (By nature, mmapped regions
-    cannot be checked very much automatically.)
-
-    Setting DEBUG may also be helpful if you are trying to modify 
-    this code. The assertions in the check routines spell out in more 
-    detail the assumptions and invariants underlying the algorithms.
-
-*/
-
-#if DEBUG 
-#include <assert.h>
-#else
-#define assert(x) ((void)0)
-#endif
-
-
-/*
-  SEPARATE_OBJECTS should be defined if you want each function to go
-  into a separate .o file.  You must then compile malloc.c once per
-  function, defining the appropriate DEFINE_ macro.  See below for the
-  list of macros.
- */
-
-#ifndef SEPARATE_OBJECTS
-#define DEFINE_MALLOC
-#define DEFINE_FREE
-#define DEFINE_REALLOC
-#define DEFINE_CALLOC
-#define DEFINE_CFREE
-#define DEFINE_MEMALIGN
-#define DEFINE_VALLOC
-#define DEFINE_PVALLOC
-#define DEFINE_MALLINFO
-#define DEFINE_MALLOC_STATS
-#define DEFINE_MALLOC_USABLE_SIZE
-#define DEFINE_MALLOPT
-
-#define STATIC static
-#else
-#define STATIC
-#endif
-
-/*
-   Define MALLOC_LOCK and MALLOC_UNLOCK to C expressions to run to
-   lock and unlock the malloc data structures.  MALLOC_LOCK may be
-   called recursively.
- */
-
-#ifndef MALLOC_LOCK
-#define MALLOC_LOCK
-#endif
-
-#ifndef MALLOC_UNLOCK
-#define MALLOC_UNLOCK
-#endif
-
-/*
-  INTERNAL_SIZE_T is the word-size used for internal bookkeeping
-  of chunk sizes. On a 64-bit machine, you can reduce malloc
-  overhead by defining INTERNAL_SIZE_T to be a 32 bit `unsigned int'
-  at the expense of not being able to handle requests greater than
-  2^31. This limitation is hardly ever a concern; you are encouraged
-  to set this. However, the default version is the same as size_t.
-*/
-
-#ifndef INTERNAL_SIZE_T
-#define INTERNAL_SIZE_T size_t
-#endif
-
-/*
-  Following is needed on implementations whereby long > size_t.
-  The problem is caused because the code performs subtractions of
-  size_t values and stores the result in long values.  In the case
-  where long > size_t and the first value is actually less than
-  the second value, the resultant value is positive.  For example,
-  (long)(x - y) where x = 0 and y is 1 ends up being 0x00000000FFFFFFFF
-  which is 2*31 - 1 instead of 0xFFFFFFFFFFFFFFFF.  This is due to the
-  fact that assignment from unsigned to signed won't sign extend.
-*/
-
-#define long_sub_size_t(x, y)				\
-  (sizeof (long) > sizeof (INTERNAL_SIZE_T) && x < y	\
-   ? -(long) (y - x)					\
-   : (long) (x - y))
-
-/*
-  REALLOC_ZERO_BYTES_FREES should be set if a call to
-  realloc with zero bytes should be the same as a call to free.
-  Some people think it should. Otherwise, since this malloc
-  returns a unique pointer for malloc(0), so does realloc(p, 0). 
-*/
-
-
-/*   #define REALLOC_ZERO_BYTES_FREES */
-
-
-/* 
-  WIN32 causes an emulation of sbrk to be compiled in
-  mmap-based options are not currently supported in WIN32.
-*/
-
-/* #define WIN32 */
-#ifdef WIN32
-#define MORECORE wsbrk
-#define HAVE_MMAP 0
-#endif
-
-
-/*
-  HAVE_MEMCPY should be defined if you are not otherwise using
-  ANSI STD C, but still have memcpy and memset in your C library
-  and want to use them in calloc and realloc. Otherwise simple
-  macro versions are defined here.
-
-  USE_MEMCPY should be defined as 1 if you actually want to
-  have memset and memcpy called. People report that the macro
-  versions are often enough faster than libc versions on many
-  systems that it is better to use them. 
-
-*/
-
-#define HAVE_MEMCPY 
-
-#ifndef USE_MEMCPY
-#ifdef HAVE_MEMCPY
-#define USE_MEMCPY 1
-#else
-#define USE_MEMCPY 0
-#endif
-#endif
-
-#if (__STD_C || defined(HAVE_MEMCPY)) 
-
-#if __STD_C
-void* memset(void*, int, size_t);
-void* memcpy(void*, const void*, size_t);
-#else
-Void_t* memset();
-Void_t* memcpy();
-#endif
-#endif
-
-#if USE_MEMCPY
-
-/* The following macros are only invoked with (2n+1)-multiples of
-   INTERNAL_SIZE_T units, with a positive integer n. This is exploited
-   for fast inline execution when n is small. */
-
-#define MALLOC_ZERO(charp, nbytes)                                            \
-do {                                                                          \
-  INTERNAL_SIZE_T mzsz = (nbytes);                                            \
-  if(mzsz <= 9*sizeof(mzsz)) {                                                \
-    INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp);                         \
-    if(mzsz >= 5*sizeof(mzsz)) {     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-      if(mzsz >= 7*sizeof(mzsz)) {   *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-        if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0;                               \
-                                     *mz++ = 0; }}}                           \
-                                     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-                                     *mz   = 0;                               \
-  } else memset((charp), 0, mzsz);                                            \
-} while(0)
-
-#define MALLOC_COPY(dest,src,nbytes)                                          \
-do {                                                                          \
-  INTERNAL_SIZE_T mcsz = (nbytes);                                            \
-  if(mcsz <= 9*sizeof(mcsz)) {                                                \
-    INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src);                        \
-    INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest);                       \
-    if(mcsz >= 5*sizeof(mcsz)) {     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-      if(mcsz >= 7*sizeof(mcsz)) {   *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-        if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++; }}}                 \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst   = *mcsrc  ;                     \
-  } else memcpy(dest, src, mcsz);                                             \
-} while(0)
-
-#else /* !USE_MEMCPY */
-
-/* Use Duff's device for good zeroing/copying performance. */
-
-#define MALLOC_ZERO(charp, nbytes)                                            \
-do {                                                                          \
-  INTERNAL_SIZE_T* mzp = (INTERNAL_SIZE_T*)(charp);                           \
-  long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn;                         \
-  if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; }             \
-  switch (mctmp) {                                                            \
-    case 0: for(;;) { *mzp++ = 0;                                             \
-    case 7:           *mzp++ = 0;                                             \
-    case 6:           *mzp++ = 0;                                             \
-    case 5:           *mzp++ = 0;                                             \
-    case 4:           *mzp++ = 0;                                             \
-    case 3:           *mzp++ = 0;                                             \
-    case 2:           *mzp++ = 0;                                             \
-    case 1:           *mzp++ = 0; if(mcn <= 0) break; mcn--; }                \
-  }                                                                           \
-} while(0)
-
-#define MALLOC_COPY(dest,src,nbytes)                                          \
-do {                                                                          \
-  INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) src;                            \
-  INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) dest;                           \
-  long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn;                         \
-  if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; }             \
-  switch (mctmp) {                                                            \
-    case 0: for(;;) { *mcdst++ = *mcsrc++;                                    \
-    case 7:           *mcdst++ = *mcsrc++;                                    \
-    case 6:           *mcdst++ = *mcsrc++;                                    \
-    case 5:           *mcdst++ = *mcsrc++;                                    \
-    case 4:           *mcdst++ = *mcsrc++;                                    \
-    case 3:           *mcdst++ = *mcsrc++;                                    \
-    case 2:           *mcdst++ = *mcsrc++;                                    \
-    case 1:           *mcdst++ = *mcsrc++; if(mcn <= 0) break; mcn--; }       \
-  }                                                                           \
-} while(0)
-
-#endif
-
-
-/*
-  Define HAVE_MMAP to optionally make malloc() use mmap() to
-  allocate very large blocks.  These will be returned to the
-  operating system immediately after a free().
-*/
-
-#ifndef HAVE_MMAP
-#define HAVE_MMAP 1
-#endif
-
-/*
-  Define HAVE_MREMAP to make realloc() use mremap() to re-allocate
-  large blocks.  This is currently only possible on Linux with
-  kernel versions newer than 1.3.77.
-*/
-
-#ifndef HAVE_MREMAP
-#ifdef INTERNAL_LINUX_C_LIB
-#define HAVE_MREMAP 1
-#else
-#define HAVE_MREMAP 0
-#endif
-#endif
-
-#if HAVE_MMAP
-
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
-#define MAP_ANONYMOUS MAP_ANON
-#endif
-
-#endif /* HAVE_MMAP */
-
-/*
-  Access to system page size. To the extent possible, this malloc
-  manages memory from the system in page-size units.
-  
-  The following mechanics for getpagesize were adapted from 
-  bsd/gnu getpagesize.h 
-*/
-
-#ifndef LACKS_UNISTD_H
-#  include <unistd.h>
-#endif
-
-#ifndef malloc_getpagesize
-#  ifdef _SC_PAGESIZE         /* some SVR4 systems omit an underscore */
-#    ifndef _SC_PAGE_SIZE
-#      define _SC_PAGE_SIZE _SC_PAGESIZE
-#    endif
-#  endif
-#  ifdef _SC_PAGE_SIZE
-#    define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
-#  else
-#    if defined(BSD) || defined(DGUX) || defined(HAVE_GETPAGESIZE)
-       extern size_t getpagesize();
-#      define malloc_getpagesize getpagesize()
-#    else
-#      include <sys/param.h>
-#      ifdef EXEC_PAGESIZE
-#        define malloc_getpagesize EXEC_PAGESIZE
-#      else
-#        ifdef NBPG
-#          ifndef CLSIZE
-#            define malloc_getpagesize NBPG
-#          else
-#            define malloc_getpagesize (NBPG * CLSIZE)
-#          endif
-#        else 
-#          ifdef NBPC
-#            define malloc_getpagesize NBPC
-#          else
-#            ifdef PAGESIZE
-#              define malloc_getpagesize PAGESIZE
-#            else
-#              define malloc_getpagesize (4096) /* just guess */
-#            endif
-#          endif
-#        endif 
-#      endif
-#    endif 
-#  endif
-#endif
-
-
-
-/*
-
-  This version of malloc supports the standard SVID/XPG mallinfo
-  routine that returns a struct containing the same kind of
-  information you can get from malloc_stats. It should work on
-  any SVID/XPG compliant system that has a /usr/include/malloc.h
-  defining struct mallinfo. (If you'd like to install such a thing
-  yourself, cut out the preliminary declarations as described above
-  and below and save them in a malloc.h file. But there's no
-  compelling reason to bother to do this.)
-
-  The main declaration needed is the mallinfo struct that is returned
-  (by-copy) by mallinfo().  The SVID/XPG malloinfo struct contains a
-  bunch of fields, most of which are not even meaningful in this
-  version of malloc. Some of these fields are are instead filled by
-  mallinfo() with other numbers that might possibly be of interest.
-
-  HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
-  /usr/include/malloc.h file that includes a declaration of struct
-  mallinfo.  If so, it is included; else an SVID2/XPG2 compliant
-  version is declared below.  These must be precisely the same for
-  mallinfo() to work.
-
-*/
-
-/* #define HAVE_USR_INCLUDE_MALLOC_H */
-
-#if HAVE_USR_INCLUDE_MALLOC_H
-#include "/usr/include/malloc.h"
-#else
-
-/* SVID2/XPG mallinfo structure */
-
-struct mallinfo {
-  int arena;    /* total space allocated from system */
-  int ordblks;  /* number of non-inuse chunks */
-  int smblks;   /* unused -- always zero */
-  int hblks;    /* number of mmapped regions */
-  int hblkhd;   /* total space in mmapped regions */
-  int usmblks;  /* unused -- always zero */
-  int fsmblks;  /* unused -- always zero */
-  int uordblks; /* total allocated space */
-  int fordblks; /* total non-inuse space */
-  int keepcost; /* top-most, releasable (via malloc_trim) space */
-};	
-
-/* SVID2/XPG mallopt options */
-
-#define M_MXFAST  1    /* UNUSED in this malloc */
-#define M_NLBLKS  2    /* UNUSED in this malloc */
-#define M_GRAIN   3    /* UNUSED in this malloc */
-#define M_KEEP    4    /* UNUSED in this malloc */
-
-#endif
-
-/* mallopt options that actually do something */
-
-#define M_TRIM_THRESHOLD    -1
-#define M_TOP_PAD           -2
-#define M_MMAP_THRESHOLD    -3
-#define M_MMAP_MAX          -4
-
-
-
-#ifndef DEFAULT_TRIM_THRESHOLD
-#define DEFAULT_TRIM_THRESHOLD (128L * 1024L)
-#endif
-
-/*
-    M_TRIM_THRESHOLD is the maximum amount of unused top-most memory 
-      to keep before releasing via malloc_trim in free().
-
-      Automatic trimming is mainly useful in long-lived programs.
-      Because trimming via sbrk can be slow on some systems, and can
-      sometimes be wasteful (in cases where programs immediately
-      afterward allocate more large chunks) the value should be high
-      enough so that your overall system performance would improve by
-      releasing.  
-
-      The trim threshold and the mmap control parameters (see below)
-      can be traded off with one another. Trimming and mmapping are
-      two different ways of releasing unused memory back to the
-      system. Between these two, it is often possible to keep
-      system-level demands of a long-lived program down to a bare
-      minimum. For example, in one test suite of sessions measuring
-      the XF86 X server on Linux, using a trim threshold of 128K and a
-      mmap threshold of 192K led to near-minimal long term resource
-      consumption.  
-
-      If you are using this malloc in a long-lived program, it should
-      pay to experiment with these values.  As a rough guide, you
-      might set to a value close to the average size of a process
-      (program) running on your system.  Releasing this much memory
-      would allow such a process to run in memory.  Generally, it's
-      worth it to tune for trimming rather tham memory mapping when a
-      program undergoes phases where several large chunks are
-      allocated and released in ways that can reuse each other's
-      storage, perhaps mixed with phases where there are no such
-      chunks at all.  And in well-behaved long-lived programs,
-      controlling release of large blocks via trimming versus mapping
-      is usually faster.
-
-      However, in most programs, these parameters serve mainly as
-      protection against the system-level effects of carrying around
-      massive amounts of unneeded memory. Since frequent calls to
-      sbrk, mmap, and munmap otherwise degrade performance, the default
-      parameters are set to relatively high values that serve only as
-      safeguards.
-
-      The default trim value is high enough to cause trimming only in
-      fairly extreme (by current memory consumption standards) cases.
-      It must be greater than page size to have any useful effect.  To
-      disable trimming completely, you can set to (unsigned long)(-1);
-
-
-*/
-
-
-#ifndef DEFAULT_TOP_PAD
-#define DEFAULT_TOP_PAD        (0)
-#endif
-
-/*
-    M_TOP_PAD is the amount of extra `padding' space to allocate or 
-      retain whenever sbrk is called. It is used in two ways internally:
-
-      * When sbrk is called to extend the top of the arena to satisfy
-        a new malloc request, this much padding is added to the sbrk
-        request.
-
-      * When malloc_trim is called automatically from free(),
-        it is used as the `pad' argument.
-
-      In both cases, the actual amount of padding is rounded 
-      so that the end of the arena is always a system page boundary.
-
-      The main reason for using padding is to avoid calling sbrk so
-      often. Having even a small pad greatly reduces the likelihood
-      that nearly every malloc request during program start-up (or
-      after trimming) will invoke sbrk, which needlessly wastes
-      time. 
-
-      Automatic rounding-up to page-size units is normally sufficient
-      to avoid measurable overhead, so the default is 0.  However, in
-      systems where sbrk is relatively slow, it can pay to increase
-      this value, at the expense of carrying around more memory than 
-      the program needs.
-
-*/
-
-
-#ifndef DEFAULT_MMAP_THRESHOLD
-#define DEFAULT_MMAP_THRESHOLD (128 * 1024)
-#endif
-
-/*
-
-    M_MMAP_THRESHOLD is the request size threshold for using mmap() 
-      to service a request. Requests of at least this size that cannot 
-      be allocated using already-existing space will be serviced via mmap.  
-      (If enough normal freed space already exists it is used instead.)
-
-      Using mmap segregates relatively large chunks of memory so that
-      they can be individually obtained and released from the host
-      system. A request serviced through mmap is never reused by any
-      other request (at least not directly; the system may just so
-      happen to remap successive requests to the same locations).
-
-      Segregating space in this way has the benefit that mmapped space
-      can ALWAYS be individually released back to the system, which
-      helps keep the system level memory demands of a long-lived
-      program low. Mapped memory can never become `locked' between
-      other chunks, as can happen with normally allocated chunks, which
-      menas that even trimming via malloc_trim would not release them.
-
-      However, it has the disadvantages that:
-
-         1. The space cannot be reclaimed, consolidated, and then
-            used to service later requests, as happens with normal chunks. 
-         2. It can lead to more wastage because of mmap page alignment
-            requirements
-         3. It causes malloc performance to be more dependent on host
-            system memory management support routines which may vary in
-            implementation quality and may impose arbitrary
-            limitations. Generally, servicing a request via normal
-            malloc steps is faster than going through a system's mmap.
-
-      All together, these considerations should lead you to use mmap
-      only for relatively large requests.  
-
-
-*/
-
-
-
-#ifndef DEFAULT_MMAP_MAX
-#if HAVE_MMAP
-#define DEFAULT_MMAP_MAX       (64)
-#else
-#define DEFAULT_MMAP_MAX       (0)
-#endif
-#endif
-
-/*
-    M_MMAP_MAX is the maximum number of requests to simultaneously 
-      service using mmap. This parameter exists because:
-
-         1. Some systems have a limited number of internal tables for
-            use by mmap.
-         2. In most systems, overreliance on mmap can degrade overall
-            performance.
-         3. If a program allocates many large regions, it is probably
-            better off using normal sbrk-based allocation routines that
-            can reclaim and reallocate normal heap memory. Using a
-            small value allows transition into this mode after the
-            first few allocations.
-
-      Setting to 0 disables all use of mmap.  If HAVE_MMAP is not set,
-      the default value is 0, and attempts to set it to non-zero values
-      in mallopt will fail.
-*/
-
-
-
-
-/* 
-
-  Special defines for linux libc
-
-  Except when compiled using these special defines for Linux libc
-  using weak aliases, this malloc is NOT designed to work in
-  multithreaded applications.  No semaphores or other concurrency
-  control are provided to ensure that multiple malloc or free calls
-  don't run at the same time, which could be disasterous. A single
-  semaphore could be used across malloc, realloc, and free (which is
-  essentially the effect of the linux weak alias approach). It would
-  be hard to obtain finer granularity.
-
-*/
-
-
-#ifdef INTERNAL_LINUX_C_LIB
-
-#if __STD_C
-
-Void_t * __default_morecore_init (ptrdiff_t);
-Void_t *(*__morecore)(ptrdiff_t) = __default_morecore_init;
-
-#else
-
-Void_t * __default_morecore_init ();
-Void_t *(*__morecore)() = __default_morecore_init;
-
-#endif
-
-#define MORECORE (*__morecore)
-#define MORECORE_FAILURE 0
-#define MORECORE_CLEARS 1 
-
-#else /* INTERNAL_LINUX_C_LIB */
-
-#ifndef INTERNAL_NEWLIB
-#if __STD_C
-extern Void_t*     sbrk(ptrdiff_t);
-#else
-extern Void_t*     sbrk();
-#endif
-#endif
-
-#ifndef MORECORE
-#define MORECORE sbrk
-#endif
-
-#ifndef MORECORE_FAILURE
-#define MORECORE_FAILURE -1
-#endif
-
-#ifndef MORECORE_CLEARS
-#define MORECORE_CLEARS 1
-#endif
-
-#endif /* INTERNAL_LINUX_C_LIB */
-
-#if defined(INTERNAL_LINUX_C_LIB) && defined(__ELF__)
-
-#define cALLOc		__libc_calloc
-#define fREe		__libc_free
-#define mALLOc		__libc_malloc
-#define mEMALIGn	__libc_memalign
-#define rEALLOc		__libc_realloc
-#define vALLOc		__libc_valloc
-#define pvALLOc		__libc_pvalloc
-#define mALLINFo	__libc_mallinfo
-#define mALLOPt		__libc_mallopt
-
-#pragma weak calloc = __libc_calloc
-#pragma weak free = __libc_free
-#pragma weak cfree = __libc_free
-#pragma weak malloc = __libc_malloc
-#pragma weak memalign = __libc_memalign
-#pragma weak realloc = __libc_realloc
-#pragma weak valloc = __libc_valloc
-#pragma weak pvalloc = __libc_pvalloc
-#pragma weak mallinfo = __libc_mallinfo
-#pragma weak mallopt = __libc_mallopt
-
-#else
-
-#ifdef INTERNAL_NEWLIB
-
-#define cALLOc		_calloc_r
-#define fREe		_free_r
-#define mALLOc		_malloc_r
-#define mEMALIGn	_memalign_r
-#define rEALLOc		_realloc_r
-#define vALLOc		_valloc_r
-#define pvALLOc		_pvalloc_r
-#define mALLINFo	_mallinfo_r
-#define mALLOPt		_mallopt_r
-
-#define malloc_stats			_malloc_stats_r
-#define malloc_trim			_malloc_trim_r
-#define malloc_usable_size		_malloc_usable_size_r
-
-#define malloc_update_mallinfo		__malloc_update_mallinfo
-
-#define malloc_av_			__malloc_av_
-#define malloc_current_mallinfo		__malloc_current_mallinfo
-#define malloc_max_sbrked_mem		__malloc_max_sbrked_mem
-#define malloc_max_total_mem		__malloc_max_total_mem
-#define malloc_sbrk_base		__malloc_sbrk_base
-#define malloc_top_pad			__malloc_top_pad
-#define malloc_trim_threshold		__malloc_trim_threshold
-
-#else /* ! INTERNAL_NEWLIB */
-
-#define cALLOc		calloc
-#define fREe		free
-#define mALLOc		malloc
-#define mEMALIGn	memalign
-#define rEALLOc		realloc
-#define vALLOc		valloc
-#define pvALLOc		pvalloc
-#define mALLINFo	mallinfo
-#define mALLOPt		mallopt
-
-#endif /* ! INTERNAL_NEWLIB */
-#endif
-
-/* Public routines */
-
-#if __STD_C
-
-Void_t* mALLOc(RARG size_t);
-void    fREe(RARG Void_t*);
-Void_t* rEALLOc(RARG Void_t*, size_t);
-Void_t* mEMALIGn(RARG size_t, size_t);
-Void_t* vALLOc(RARG size_t);
-Void_t* pvALLOc(RARG size_t);
-Void_t* cALLOc(RARG size_t, size_t);
-void    cfree(Void_t*);
-int     malloc_trim(RARG size_t);
-size_t  malloc_usable_size(RARG Void_t*);
-void    malloc_stats(RONEARG);
-int     mALLOPt(RARG int, int);
-struct mallinfo mALLINFo(RONEARG);
-#else
-Void_t* mALLOc();
-void    fREe();
-Void_t* rEALLOc();
-Void_t* mEMALIGn();
-Void_t* vALLOc();
-Void_t* pvALLOc();
-Void_t* cALLOc();
-void    cfree();
-int     malloc_trim();
-size_t  malloc_usable_size();
-void    malloc_stats();
-int     mALLOPt();
-struct mallinfo mALLINFo();
-#endif
-
-
-#ifdef __cplusplus
-};  /* end of extern "C" */
-#endif
-
-/* ---------- To make a malloc.h, end cutting here ------------ */
-
-
-/* 
-  Emulation of sbrk for WIN32
-  All code within the ifdef WIN32 is untested by me.
-*/
-
-
-#ifdef WIN32
-
-#define AlignPage(add) (((add) + (malloc_getpagesize-1)) & \
-~(malloc_getpagesize-1))
-
-/* resrve 64MB to insure large contiguous space */ 
-#define RESERVED_SIZE (1024*1024*64)
-#define NEXT_SIZE (2048*1024)
-#define TOP_MEMORY ((unsigned long)2*1024*1024*1024)
-
-struct GmListElement;
-typedef struct GmListElement GmListElement;
-
-struct GmListElement 
-{
-	GmListElement* next;
-	void* base;
-};
-
-static GmListElement* head = 0;
-static unsigned int gNextAddress = 0;
-static unsigned int gAddressBase = 0;
-static unsigned int gAllocatedSize = 0;
-
-static
-GmListElement* makeGmListElement (void* bas)
-{
-	GmListElement* this;
-	this = (GmListElement*)(void*)LocalAlloc (0, sizeof (GmListElement));
-	ASSERT (this);
-	if (this)
-	{
-		this->base = bas;
-		this->next = head;
-		head = this;
-	}
-	return this;
-}
-
-void gcleanup ()
-{
-	BOOL rval;
-	ASSERT ( (head == NULL) || (head->base == (void*)gAddressBase));
-	if (gAddressBase && (gNextAddress - gAddressBase))
-	{
-		rval = VirtualFree ((void*)gAddressBase, 
-							gNextAddress - gAddressBase, 
-							MEM_DECOMMIT);
-        ASSERT (rval);
-	}
-	while (head)
-	{
-		GmListElement* next = head->next;
-		rval = VirtualFree (head->base, 0, MEM_RELEASE);
-		ASSERT (rval);
-		LocalFree (head);
-		head = next;
-	}
-}
-		
-static
-void* findRegion (void* start_address, unsigned long size)
-{
-	MEMORY_BASIC_INFORMATION info;
-	while ((unsigned long)start_address < TOP_MEMORY)
-	{
-		VirtualQuery (start_address, &info, sizeof (info));
-		if (info.State != MEM_FREE)
-			start_address = (char*)info.BaseAddress + info.RegionSize;
-		else if (info.RegionSize >= size)
-			return start_address;
-		else
-			start_address = (char*)info.BaseAddress + info.RegionSize; 
-	}
-	return NULL;
-	
-}
-
-
-void* wsbrk (long size)
-{
-	void* tmp;
-	if (size > 0)
-	{
-		if (gAddressBase == 0)
-		{
-			gAllocatedSize = max (RESERVED_SIZE, AlignPage (size));
-			gNextAddress = gAddressBase = 
-				(unsigned int)VirtualAlloc (NULL, gAllocatedSize, 
-											MEM_RESERVE, PAGE_NOACCESS);
-		} else if (AlignPage (gNextAddress + size) > (gAddressBase +
-gAllocatedSize))
-		{
-			long new_size = max (NEXT_SIZE, AlignPage (size));
-			void* new_address = (void*)(gAddressBase+gAllocatedSize);
-			do 
-			{
-				new_address = findRegion (new_address, new_size);
-				
-				if (new_address == 0)
-					return (void*)-1;
-
-				gAddressBase = gNextAddress =
-					(unsigned int)VirtualAlloc (new_address, new_size,
-												MEM_RESERVE, PAGE_NOACCESS);
-				// repeat in case of race condition
-				// The region that we found has been snagged 
-				// by another thread
-			}
-			while (gAddressBase == 0);
-
-			ASSERT (new_address == (void*)gAddressBase);
-
-			gAllocatedSize = new_size;
-
-			if (!makeGmListElement ((void*)gAddressBase))
-				return (void*)-1;
-		}
-		if ((size + gNextAddress) > AlignPage (gNextAddress))
-		{
-			void* res;
-			res = VirtualAlloc ((void*)AlignPage (gNextAddress),
-								(size + gNextAddress - 
-								 AlignPage (gNextAddress)), 
-								MEM_COMMIT, PAGE_READWRITE);
-			if (res == 0)
-				return (void*)-1;
-		}
-		tmp = (void*)gNextAddress;
-		gNextAddress = (unsigned int)tmp + size;
-		return tmp;
-	}
-	else if (size < 0)
-	{
-		unsigned int alignedGoal = AlignPage (gNextAddress + size);
-		/* Trim by releasing the virtual memory */
-		if (alignedGoal >= gAddressBase)
-		{
-			VirtualFree ((void*)alignedGoal, gNextAddress - alignedGoal,  
-						 MEM_DECOMMIT);
-			gNextAddress = gNextAddress + size;
-			return (void*)gNextAddress;
-		}
-		else 
-		{
-			VirtualFree ((void*)gAddressBase, gNextAddress - gAddressBase,
-						 MEM_DECOMMIT);
-			gNextAddress = gAddressBase;
-			return (void*)-1;
-		}
-	}
-	else
-	{
-		return (void*)gNextAddress;
-	}
-}
-
-#endif
-
-
-
-/*
-  Type declarations
-*/
-
-
-struct malloc_chunk
-{
-  INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
-  INTERNAL_SIZE_T size;      /* Size in bytes, including overhead. */
-  struct malloc_chunk* fd;   /* double links -- used only if free. */
-  struct malloc_chunk* bk;
-};
-
-typedef struct malloc_chunk* mchunkptr;
-
-/*
-
-   malloc_chunk details:
-
-    (The following includes lightly edited explanations by Colin Plumb.)
-
-    Chunks of memory are maintained using a `boundary tag' method as
-    described in e.g., Knuth or Standish.  (See the paper by Paul
-    Wilson ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a
-    survey of such techniques.)  Sizes of free chunks are stored both
-    in the front of each chunk and at the end.  This makes
-    consolidating fragmented chunks into bigger chunks very fast.  The
-    size fields also hold bits representing whether chunks are free or
-    in use.
-
-    An allocated chunk looks like this:  
-
-
-    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk, if allocated            | |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk, in bytes                         |P|
-      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             User data starts here...                          .
-            .                                                               .
-            .             (malloc_usable_space() bytes)                     .
-            .                                                               |
-nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk                                     |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-
-    Where "chunk" is the front of the chunk for the purpose of most of
-    the malloc code, but "mem" is the pointer that is returned to the
-    user.  "Nextchunk" is the beginning of the next contiguous chunk.
-
-    Chunks always begin on even word boundries, so the mem portion
-    (which is returned to the user) is also on an even word boundary, and
-    thus double-word aligned.
-
-    Free chunks are stored in circular doubly-linked lists, and look like this:
-
-    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk                            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-    `head:' |             Size of chunk, in bytes                         |P|
-      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Forward pointer to next chunk in list             |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Back pointer to previous chunk in list            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Unused space (may be 0 bytes long)                .
-            .                                                               .
-            .                                                               |
-nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-    `foot:' |             Size of chunk, in bytes                           |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-    The P (PREV_INUSE) bit, stored in the unused low-order bit of the
-    chunk size (which is always a multiple of two words), is an in-use
-    bit for the *previous* chunk.  If that bit is *clear*, then the
-    word before the current chunk size contains the previous chunk
-    size, and can be used to find the front of the previous chunk.
-    (The very first chunk allocated always has this bit set,
-    preventing access to non-existent (or non-owned) memory.)
-
-    Note that the `foot' of the current chunk is actually represented
-    as the prev_size of the NEXT chunk. (This makes it easier to
-    deal with alignments etc).
-
-    The two exceptions to all this are 
-
-     1. The special chunk `top', which doesn't bother using the 
-        trailing size field since there is no
-        next contiguous chunk that would have to index off it. (After
-        initialization, `top' is forced to always exist.  If it would
-        become less than MINSIZE bytes long, it is replenished via
-        malloc_extend_top.)
-
-     2. Chunks allocated via mmap, which have the second-lowest-order
-        bit (IS_MMAPPED) set in their size fields.  Because they are
-        never merged or traversed from any other chunk, they have no
-        foot size or inuse information.
-
-    Available chunks are kept in any of several places (all declared below):
-
-    * `av': An array of chunks serving as bin headers for consolidated
-       chunks. Each bin is doubly linked.  The bins are approximately
-       proportionally (log) spaced.  There are a lot of these bins
-       (128). This may look excessive, but works very well in
-       practice.  All procedures maintain the invariant that no
-       consolidated chunk physically borders another one. Chunks in
-       bins are kept in size order, with ties going to the
-       approximately least recently used chunk.
-
-       The chunks in each bin are maintained in decreasing sorted order by
-       size.  This is irrelevant for the small bins, which all contain
-       the same-sized chunks, but facilitates best-fit allocation for
-       larger chunks. (These lists are just sequential. Keeping them in
-       order almost never requires enough traversal to warrant using
-       fancier ordered data structures.)  Chunks of the same size are
-       linked with the most recently freed at the front, and allocations
-       are taken from the back.  This results in LRU or FIFO allocation
-       order, which tends to give each chunk an equal opportunity to be
-       consolidated with adjacent freed chunks, resulting in larger free
-       chunks and less fragmentation. 
-
-    * `top': The top-most available chunk (i.e., the one bordering the
-       end of available memory) is treated specially. It is never
-       included in any bin, is used only if no other chunk is
-       available, and is released back to the system if it is very
-       large (see M_TRIM_THRESHOLD).
-
-    * `last_remainder': A bin holding only the remainder of the
-       most recently split (non-top) chunk. This bin is checked
-       before other non-fitting chunks, so as to provide better
-       locality for runs of sequentially allocated chunks. 
-
-    *  Implicitly, through the host system's memory mapping tables.
-       If supported, requests greater than a threshold are usually 
-       serviced via calls to mmap, and then later released via munmap.
-
-*/
-
-
-
-
-
-
-/*  sizes, alignments */
-
-#define SIZE_SZ                (sizeof(INTERNAL_SIZE_T))
-#ifndef MALLOC_ALIGNMENT
-#define MALLOC_ALIGN           8
-#define MALLOC_ALIGNMENT       (SIZE_SZ < 4 ? 8 : (SIZE_SZ + SIZE_SZ))
-#else
-#define MALLOC_ALIGN           MALLOC_ALIGNMENT
-#endif
-#define MALLOC_ALIGN_MASK      (MALLOC_ALIGNMENT - 1)
-#define MINSIZE                (sizeof(struct malloc_chunk))
-
-/* conversion from malloc headers to user pointers, and back */
-
-#define chunk2mem(p)   ((Void_t*)((char*)(p) + 2*SIZE_SZ))
-#define mem2chunk(mem) ((mchunkptr)((char*)(mem) - 2*SIZE_SZ))
-
-/* pad request bytes into a usable size */
-
-#define request2size(req) \
- (((unsigned long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
-  (unsigned long)(MINSIZE + MALLOC_ALIGN_MASK)) ? ((MINSIZE + MALLOC_ALIGN_MASK) & ~(MALLOC_ALIGN_MASK)) : \
-   (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK)))
-
-/* Check if m has acceptable alignment */
-
-#define aligned_OK(m)    (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0)
-
-
-
-
-/* 
-  Physical chunk operations  
-*/
-
-
-/* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */
-
-#define PREV_INUSE 0x1 
-
-/* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */
-
-#define IS_MMAPPED 0x2
-
-/* Bits to mask off when extracting size */
-
-#define SIZE_BITS (PREV_INUSE|IS_MMAPPED)
-
-
-/* Ptr to next physical malloc_chunk. */
-
-#define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->size & ~PREV_INUSE) ))
-
-/* Ptr to previous physical malloc_chunk */
-
-#define prev_chunk(p)\
-   ((mchunkptr)( ((char*)(p)) - ((p)->prev_size) ))
-
-
-/* Treat space at ptr + offset as a chunk */
-
-#define chunk_at_offset(p, s)  ((mchunkptr)(((char*)(p)) + (s)))
-
-
-
-
-/* 
-  Dealing with use bits 
-*/
-
-/* extract p's inuse bit */
-
-#define inuse(p)\
-((((mchunkptr)(((char*)(p))+((p)->size & ~PREV_INUSE)))->size) & PREV_INUSE)
-
-/* extract inuse bit of previous chunk */
-
-#define prev_inuse(p)  ((p)->size & PREV_INUSE)
-
-/* check for mmap()'ed chunk */
-
-#define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED)
-
-/* set/clear chunk as in use without otherwise disturbing */
-
-#define set_inuse(p)\
-((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size |= PREV_INUSE
-
-#define clear_inuse(p)\
-((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size &= ~(PREV_INUSE)
-
-/* check/set/clear inuse bits in known places */
-
-#define inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size & PREV_INUSE)
-
-#define set_inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size |= PREV_INUSE)
-
-#define clear_inuse_bit_at_offset(p, s)\
- (((mchunkptr)(((char*)(p)) + (s)))->size &= ~(PREV_INUSE))
-
-
-
-
-/* 
-  Dealing with size fields 
-*/
-
-/* Get size, ignoring use bits */
-
-#define chunksize(p)          ((p)->size & ~(SIZE_BITS))
-
-/* Set size at head, without disturbing its use bit */
-
-#define set_head_size(p, s)   ((p)->size = (((p)->size & PREV_INUSE) | (s)))
-
-/* Set size/use ignoring previous bits in header */
-
-#define set_head(p, s)        ((p)->size = (s))
-
-/* Set size at footer (only when chunk is not in use) */
-
-#define set_foot(p, s)   (((mchunkptr)((char*)(p) + (s)))->prev_size = (s))
-
-
-
-
-
-/*
-   Bins
-
-    The bins, `av_' are an array of pairs of pointers serving as the
-    heads of (initially empty) doubly-linked lists of chunks, laid out
-    in a way so that each pair can be treated as if it were in a
-    malloc_chunk. (This way, the fd/bk offsets for linking bin heads
-    and chunks are the same).
-
-    Bins for sizes < 512 bytes contain chunks of all the same size, spaced
-    8 bytes apart. Larger bins are approximately logarithmically
-    spaced. (See the table below.) The `av_' array is never mentioned
-    directly in the code, but instead via bin access macros.
-
-    Bin layout:
-
-    64 bins of size       8
-    32 bins of size      64
-    16 bins of size     512
-     8 bins of size    4096
-     4 bins of size   32768
-     2 bins of size  262144
-     1 bin  of size what's left
-
-    There is actually a little bit of slop in the numbers in bin_index
-    for the sake of speed. This makes no difference elsewhere.
-
-    The special chunks `top' and `last_remainder' get their own bins,
-    (this is implemented via yet more trickery with the av_ array),
-    although `top' is never properly linked to its bin since it is
-    always handled specially.
-
-*/
-
-#ifdef SEPARATE_OBJECTS
-#define av_ malloc_av_
-#endif
-
-#define NAV             128   /* number of bins */
-
-typedef struct malloc_chunk* mbinptr;
-
-/* access macros */
-
-#define bin_at(i)      ((mbinptr)((char*)&(av_[2*(i) + 2]) - 2*SIZE_SZ))
-#define next_bin(b)    ((mbinptr)((char*)(b) + 2 * sizeof(mbinptr)))
-#define prev_bin(b)    ((mbinptr)((char*)(b) - 2 * sizeof(mbinptr)))
-
-/*
-   The first 2 bins are never indexed. The corresponding av_ cells are instead
-   used for bookkeeping. This is not to save space, but to simplify
-   indexing, maintain locality, and avoid some initialization tests.
-*/
-
-#define top            (bin_at(0)->fd)   /* The topmost chunk */
-#define last_remainder (bin_at(1))       /* remainder from last split */
-
-
-/*
-   Because top initially points to its own bin with initial
-   zero size, thus forcing extension on the first malloc request, 
-   we avoid having any special code in malloc to check whether 
-   it even exists yet. But we still need to in malloc_extend_top.
-*/
-
-#define initial_top    ((mchunkptr)(bin_at(0)))
-
-/* Helper macro to initialize bins */
-
-#define IAV(i)  bin_at(i), bin_at(i)
-
-#ifdef DEFINE_MALLOC
-STATIC mbinptr av_[NAV * 2 + 2] = {
- 0, 0,
- IAV(0),   IAV(1),   IAV(2),   IAV(3),   IAV(4),   IAV(5),   IAV(6),   IAV(7),
- IAV(8),   IAV(9),   IAV(10),  IAV(11),  IAV(12),  IAV(13),  IAV(14),  IAV(15),
- IAV(16),  IAV(17),  IAV(18),  IAV(19),  IAV(20),  IAV(21),  IAV(22),  IAV(23),
- IAV(24),  IAV(25),  IAV(26),  IAV(27),  IAV(28),  IAV(29),  IAV(30),  IAV(31),
- IAV(32),  IAV(33),  IAV(34),  IAV(35),  IAV(36),  IAV(37),  IAV(38),  IAV(39),
- IAV(40),  IAV(41),  IAV(42),  IAV(43),  IAV(44),  IAV(45),  IAV(46),  IAV(47),
- IAV(48),  IAV(49),  IAV(50),  IAV(51),  IAV(52),  IAV(53),  IAV(54),  IAV(55),
- IAV(56),  IAV(57),  IAV(58),  IAV(59),  IAV(60),  IAV(61),  IAV(62),  IAV(63),
- IAV(64),  IAV(65),  IAV(66),  IAV(67),  IAV(68),  IAV(69),  IAV(70),  IAV(71),
- IAV(72),  IAV(73),  IAV(74),  IAV(75),  IAV(76),  IAV(77),  IAV(78),  IAV(79),
- IAV(80),  IAV(81),  IAV(82),  IAV(83),  IAV(84),  IAV(85),  IAV(86),  IAV(87),
- IAV(88),  IAV(89),  IAV(90),  IAV(91),  IAV(92),  IAV(93),  IAV(94),  IAV(95),
- IAV(96),  IAV(97),  IAV(98),  IAV(99),  IAV(100), IAV(101), IAV(102), IAV(103),
- IAV(104), IAV(105), IAV(106), IAV(107), IAV(108), IAV(109), IAV(110), IAV(111),
- IAV(112), IAV(113), IAV(114), IAV(115), IAV(116), IAV(117), IAV(118), IAV(119),
- IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127)
-};
-#else
-extern mbinptr av_[NAV * 2 + 2];
-#endif
-
-
-
-/* field-extraction macros */
-
-#define first(b) ((b)->fd)
-#define last(b)  ((b)->bk)
-
-/* 
-  Indexing into bins
-*/
-
-#define bin_index(sz)                                                          \
-(((((unsigned long)(sz)) >> 9) ==    0) ?       (((unsigned long)(sz)) >>  3): \
- ((((unsigned long)(sz)) >> 9) <=    4) ?  56 + (((unsigned long)(sz)) >>  6): \
- ((((unsigned long)(sz)) >> 9) <=   20) ?  91 + (((unsigned long)(sz)) >>  9): \
- ((((unsigned long)(sz)) >> 9) <=   84) ? 110 + (((unsigned long)(sz)) >> 12): \
- ((((unsigned long)(sz)) >> 9) <=  340) ? 119 + (((unsigned long)(sz)) >> 15): \
- ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18): \
-                                          126)                     
-/* 
-  bins for chunks < 512 are all spaced SMALLBIN_WIDTH bytes apart, and hold
-  identically sized chunks. This is exploited in malloc.
-*/
-
-#define MAX_SMALLBIN_SIZE   512
-#define SMALLBIN_WIDTH        8
-#define SMALLBIN_WIDTH_BITS   3
-#define MAX_SMALLBIN        (MAX_SMALLBIN_SIZE / SMALLBIN_WIDTH) - 1
-
-#define smallbin_index(sz)  (((unsigned long)(sz)) >> SMALLBIN_WIDTH_BITS)
-
-/* 
-   Requests are `small' if both the corresponding and the next bin are small
-*/
-
-#define is_small_request(nb) (nb < MAX_SMALLBIN_SIZE - SMALLBIN_WIDTH)
-
-
-
-/*
-    To help compensate for the large number of bins, a one-level index
-    structure is used for bin-by-bin searching.  `binblocks' is a
-    one-word bitvector recording whether groups of BINBLOCKWIDTH bins
-    have any (possibly) non-empty bins, so they can be skipped over
-    all at once during during traversals. The bits are NOT always
-    cleared as soon as all bins in a block are empty, but instead only
-    when all are noticed to be empty during traversal in malloc.
-*/
-
-#define BINBLOCKWIDTH     4   /* bins per block */
-
-#define binblocks      (bin_at(0)->size) /* bitvector of nonempty blocks */
-
-/* bin<->block macros */
-
-#define idx2binblock(ix)    ((unsigned long)1 << (ix / BINBLOCKWIDTH))
-#define mark_binblock(ii)   (binblocks |= idx2binblock(ii))
-#define clear_binblock(ii)  (binblocks &= ~(idx2binblock(ii)))
-
-
-
-
-
-/*  Other static bookkeeping data */
-
-#ifdef SEPARATE_OBJECTS
-#define trim_threshold		malloc_trim_threshold
-#define top_pad			malloc_top_pad
-#define n_mmaps_max		malloc_n_mmaps_max
-#define mmap_threshold		malloc_mmap_threshold
-#define sbrk_base		malloc_sbrk_base
-#define max_sbrked_mem		malloc_max_sbrked_mem
-#define max_total_mem		malloc_max_total_mem
-#define current_mallinfo	malloc_current_mallinfo
-#define n_mmaps			malloc_n_mmaps
-#define max_n_mmaps		malloc_max_n_mmaps
-#define mmapped_mem		malloc_mmapped_mem
-#define max_mmapped_mem		malloc_max_mmapped_mem
-#endif
-
-/* variables holding tunable values */
-
-#ifdef DEFINE_MALLOC
-
-STATIC unsigned long trim_threshold   = DEFAULT_TRIM_THRESHOLD;
-STATIC unsigned long top_pad          = DEFAULT_TOP_PAD;
-#if HAVE_MMAP
-STATIC unsigned int  n_mmaps_max      = DEFAULT_MMAP_MAX;
-STATIC unsigned long mmap_threshold   = DEFAULT_MMAP_THRESHOLD;
-#endif
-
-/* The first value returned from sbrk */
-STATIC char* sbrk_base = (char*)(-1);
-
-/* The maximum memory obtained from system via sbrk */
-STATIC unsigned long max_sbrked_mem = 0; 
-
-/* The maximum via either sbrk or mmap */
-STATIC unsigned long max_total_mem = 0; 
-
-/* internal working copy of mallinfo */
-STATIC struct mallinfo current_mallinfo = {  0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-#if HAVE_MMAP
-
-/* Tracking mmaps */
-
-STATIC unsigned int n_mmaps = 0;
-STATIC unsigned int max_n_mmaps = 0;
-STATIC unsigned long mmapped_mem = 0;
-STATIC unsigned long max_mmapped_mem = 0;
-
-#endif
-
-#else /* ! DEFINE_MALLOC */
-
-extern unsigned long trim_threshold;
-extern unsigned long top_pad;
-#if HAVE_MMAP
-extern unsigned int  n_mmaps_max;
-extern unsigned long mmap_threshold;
-#endif
-extern char* sbrk_base;
-extern unsigned long max_sbrked_mem;
-extern unsigned long max_total_mem;
-extern struct mallinfo current_mallinfo;
-#if HAVE_MMAP
-extern unsigned int n_mmaps;
-extern unsigned int max_n_mmaps;
-extern unsigned long mmapped_mem;
-extern unsigned long max_mmapped_mem;
-#endif
-
-#endif /* ! DEFINE_MALLOC */
-
-/* The total memory obtained from system via sbrk */
-#define sbrked_mem  (current_mallinfo.arena)
-
-
-
-/* 
-  Debugging support 
-*/
-
-#if DEBUG
-
-
-/*
-  These routines make a number of assertions about the states
-  of data structures that should be true at all times. If any
-  are not true, it's very likely that a user program has somehow
-  trashed memory. (It's also possible that there is a coding error
-  in malloc. In which case, please report it!)
-*/
-
-#if __STD_C
-static void do_check_chunk(mchunkptr p) 
-#else
-static void do_check_chunk(p) mchunkptr p;
-#endif
-{ 
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-
-  /* No checkable chunk is mmapped */
-  assert(!chunk_is_mmapped(p));
-
-  /* Check for legal address ... */
-  assert((char*)p >= sbrk_base);
-  if (p != top) 
-    assert((char*)p + sz <= (char*)top);
-  else
-    assert((char*)p + sz <= sbrk_base + sbrked_mem);
-
-}
-
-
-#if __STD_C
-static void do_check_free_chunk(mchunkptr p) 
-#else
-static void do_check_free_chunk(p) mchunkptr p;
-#endif
-{ 
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-  mchunkptr next = chunk_at_offset(p, sz);
-
-  do_check_chunk(p);
-
-  /* Check whether it claims to be free ... */
-  assert(!inuse(p));
-
-  /* Unless a special marker, must have OK fields */
-  if ((long)sz >= (long)MINSIZE)
-  {
-    assert((sz & MALLOC_ALIGN_MASK) == 0);
-    assert(aligned_OK(chunk2mem(p)));
-    /* ... matching footer field */
-    assert(next->prev_size == sz);
-    /* ... and is fully consolidated */
-    assert(prev_inuse(p));
-    assert (next == top || inuse(next));
-    
-    /* ... and has minimally sane links */
-    assert(p->fd->bk == p);
-    assert(p->bk->fd == p);
-  }
-  else /* markers are always of size SIZE_SZ */
-    assert(sz == SIZE_SZ); 
-}
-
-#if __STD_C
-static void do_check_inuse_chunk(mchunkptr p) 
-#else
-static void do_check_inuse_chunk(p) mchunkptr p;
-#endif
-{ 
-  mchunkptr next = next_chunk(p);
-  do_check_chunk(p);
-
-  /* Check whether it claims to be in use ... */
-  assert(inuse(p));
-
-  /* ... and is surrounded by OK chunks.
-    Since more things can be checked with free chunks than inuse ones,
-    if an inuse chunk borders them and debug is on, it's worth doing them.
-  */
-  if (!prev_inuse(p)) 
-  {
-    mchunkptr prv = prev_chunk(p);
-    assert(next_chunk(prv) == p);
-    do_check_free_chunk(prv);
-  }
-  if (next == top)
-  {
-    assert(prev_inuse(next));
-    assert(chunksize(next) >= MINSIZE);
-  }
-  else if (!inuse(next))
-    do_check_free_chunk(next);
-
-}
-
-#if __STD_C
-static void do_check_malloced_chunk(mchunkptr p, INTERNAL_SIZE_T s) 
-#else
-static void do_check_malloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s;
-#endif
-{
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-  long room = long_sub_size_t(sz, s);
-
-  do_check_inuse_chunk(p);
-
-  /* Legal size ... */
-  assert((long)sz >= (long)MINSIZE);
-  assert((sz & MALLOC_ALIGN_MASK) == 0);
-  assert(room >= 0);
-  assert(room < (long)MINSIZE);
-
-  /* ... and alignment */
-  assert(aligned_OK(chunk2mem(p)));
-
-
-  /* ... and was allocated at front of an available chunk */
-  assert(prev_inuse(p));
-
-}
-
-
-#define check_free_chunk(P)  do_check_free_chunk(P)
-#define check_inuse_chunk(P) do_check_inuse_chunk(P)
-#define check_chunk(P) do_check_chunk(P)
-#define check_malloced_chunk(P,N) do_check_malloced_chunk(P,N)
-#else
-#define check_free_chunk(P) 
-#define check_inuse_chunk(P)
-#define check_chunk(P)
-#define check_malloced_chunk(P,N)
-#endif
-
-
-
-/* 
-  Macro-based internal utilities
-*/
-
-
-/*  
-  Linking chunks in bin lists.
-  Call these only with variables, not arbitrary expressions, as arguments.
-*/
-
-/* 
-  Place chunk p of size s in its bin, in size order,
-  putting it ahead of others of same size.
-*/
-
-
-#define frontlink(P, S, IDX, BK, FD)                                          \
-{                                                                             \
-  if (S < MAX_SMALLBIN_SIZE)                                                  \
-  {                                                                           \
-    IDX = smallbin_index(S);                                                  \
-    mark_binblock(IDX);                                                       \
-    BK = bin_at(IDX);                                                         \
-    FD = BK->fd;                                                              \
-    P->bk = BK;                                                               \
-    P->fd = FD;                                                               \
-    FD->bk = BK->fd = P;                                                      \
-  }                                                                           \
-  else                                                                        \
-  {                                                                           \
-    IDX = bin_index(S);                                                       \
-    BK = bin_at(IDX);                                                         \
-    FD = BK->fd;                                                              \
-    if (FD == BK) mark_binblock(IDX);                                         \
-    else                                                                      \
-    {                                                                         \
-      while (FD != BK && S < chunksize(FD)) FD = FD->fd;                      \
-      BK = FD->bk;                                                            \
-    }                                                                         \
-    P->bk = BK;                                                               \
-    P->fd = FD;                                                               \
-    FD->bk = BK->fd = P;                                                      \
-  }                                                                           \
-}
-
-
-/* take a chunk off a list */
-
-#define unlink(P, BK, FD)                                                     \
-{                                                                             \
-  BK = P->bk;                                                                 \
-  FD = P->fd;                                                                 \
-  FD->bk = BK;                                                        \
-  BK->fd = FD;                                                        \
-}                                                                             \
-
-/* Place p as the last remainder */
-
-#define link_last_remainder(P)                                                \
-{                                                                             \
-  last_remainder->fd = last_remainder->bk =  P;                               \
-  P->fd = P->bk = last_remainder;                                             \
-}
-
-/* Clear the last_remainder bin */
-
-#define clear_last_remainder \
-  (last_remainder->fd = last_remainder->bk = last_remainder)
-
-
-
-
-
-
-/* Routines dealing with mmap(). */
-
-#if HAVE_MMAP
-
-#ifdef DEFINE_MALLOC
-
-#if __STD_C
-static mchunkptr mmap_chunk(size_t size)
-#else
-static mchunkptr mmap_chunk(size) size_t size;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  mchunkptr p;
-
-#ifndef MAP_ANONYMOUS
-  static int fd = -1;
-#endif
-
-  if(n_mmaps >= n_mmaps_max) return 0; /* too many regions */
-
-  /* For mmapped chunks, the overhead is one SIZE_SZ unit larger, because
-   * there is no following chunk whose prev_size field could be used.
-   */
-  size = (size + SIZE_SZ + page_mask) & ~page_mask;
-
-#ifdef MAP_ANONYMOUS
-  p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE,
-		      MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
-#else /* !MAP_ANONYMOUS */
-  if (fd < 0) 
-  {
-    fd = open("/dev/zero", O_RDWR);
-    if(fd < 0) return 0;
-  }
-  p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
-#endif
-
-  if(p == (mchunkptr)-1) return 0;
-
-  n_mmaps++;
-  if (n_mmaps > max_n_mmaps) max_n_mmaps = n_mmaps;
-  
-  /* We demand that eight bytes into a page must be 8-byte aligned. */
-  assert(aligned_OK(chunk2mem(p)));
-
-  /* The offset to the start of the mmapped region is stored
-   * in the prev_size field of the chunk; normally it is zero,
-   * but that can be changed in memalign().
-   */
-  p->prev_size = 0;
-  set_head(p, size|IS_MMAPPED);
-  
-  mmapped_mem += size;
-  if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem) 
-    max_mmapped_mem = mmapped_mem;
-  if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem) 
-    max_total_mem = mmapped_mem + sbrked_mem;
-  return p;
-}
-
-#endif /* DEFINE_MALLOC */
-
-#ifdef SEPARATE_OBJECTS
-#define munmap_chunk malloc_munmap_chunk
-#endif
-
-#ifdef DEFINE_FREE
-
-#if __STD_C
-STATIC void munmap_chunk(mchunkptr p)
-#else
-STATIC void munmap_chunk(p) mchunkptr p;
-#endif
-{
-  INTERNAL_SIZE_T size = chunksize(p);
-  int ret;
-
-  assert (chunk_is_mmapped(p));
-  assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
-  assert((n_mmaps > 0));
-  assert(((p->prev_size + size) & (malloc_getpagesize-1)) == 0);
-
-  n_mmaps--;
-  mmapped_mem -= (size + p->prev_size);
-
-  ret = munmap((char *)p - p->prev_size, size + p->prev_size);
-
-  /* munmap returns non-zero on failure */
-  assert(ret == 0);
-}
-
-#else /* ! DEFINE_FREE */
-
-#if __STD_C
-extern void munmap_chunk(mchunkptr);
-#else
-extern void munmap_chunk();
-#endif
-
-#endif /* ! DEFINE_FREE */
-
-#if HAVE_MREMAP
-
-#ifdef DEFINE_REALLOC
-
-#if __STD_C
-static mchunkptr mremap_chunk(mchunkptr p, size_t new_size)
-#else
-static mchunkptr mremap_chunk(p, new_size) mchunkptr p; size_t new_size;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  INTERNAL_SIZE_T offset = p->prev_size;
-  INTERNAL_SIZE_T size = chunksize(p);
-  char *cp;
-
-  assert (chunk_is_mmapped(p));
-  assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
-  assert((n_mmaps > 0));
-  assert(((size + offset) & (malloc_getpagesize-1)) == 0);
-
-  /* Note the extra SIZE_SZ overhead as in mmap_chunk(). */
-  new_size = (new_size + offset + SIZE_SZ + page_mask) & ~page_mask;
-
-  cp = (char *)mremap((char *)p - offset, size + offset, new_size, 1);
-
-  if (cp == (char *)-1) return 0;
-
-  p = (mchunkptr)(cp + offset);
-
-  assert(aligned_OK(chunk2mem(p)));
-
-  assert((p->prev_size == offset));
-  set_head(p, (new_size - offset)|IS_MMAPPED);
-
-  mmapped_mem -= size + offset;
-  mmapped_mem += new_size;
-  if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem) 
-    max_mmapped_mem = mmapped_mem;
-  if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem)
-    max_total_mem = mmapped_mem + sbrked_mem;
-  return p;
-}
-
-#endif /* DEFINE_REALLOC */
-
-#endif /* HAVE_MREMAP */
-
-#endif /* HAVE_MMAP */
-
-
-
-
-#ifdef DEFINE_MALLOC
-
-/* 
-  Extend the top-most chunk by obtaining memory from system.
-  Main interface to sbrk (but see also malloc_trim).
-*/
-
-#if __STD_C
-static void malloc_extend_top(RARG INTERNAL_SIZE_T nb)
-#else
-static void malloc_extend_top(RARG nb) RDECL INTERNAL_SIZE_T nb;
-#endif
-{
-  char*     brk;                  /* return value from sbrk */
-  INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of sbrked space */
-  INTERNAL_SIZE_T correction;     /* bytes for 2nd sbrk call */
-  int correction_failed = 0;      /* whether we should relax the assertion */
-  char*     new_brk;              /* return of 2nd sbrk call */
-  INTERNAL_SIZE_T top_size;       /* new size of top chunk */
-
-  mchunkptr old_top     = top;  /* Record state of old top */
-  INTERNAL_SIZE_T old_top_size = chunksize(old_top);
-  char*     old_end      = (char*)(chunk_at_offset(old_top, old_top_size));
-
-  /* Pad request with top_pad plus minimal overhead */
-  
-  INTERNAL_SIZE_T    sbrk_size     = nb + top_pad + MINSIZE;
-  unsigned long pagesz    = malloc_getpagesize;
-
-  /* If not the first time through, round to preserve page boundary */
-  /* Otherwise, we need to correct to a page size below anyway. */
-  /* (We also correct below if an intervening foreign sbrk call.) */
-
-  if (sbrk_base != (char*)(-1))
-    sbrk_size = (sbrk_size + (pagesz - 1)) & ~(pagesz - 1);
-
-  brk = (char*)(MORECORE (sbrk_size));
-
-  /* Fail if sbrk failed or if a foreign sbrk call killed our space */
-  if (brk == (char*)(MORECORE_FAILURE) || 
-      (brk < old_end && old_top != initial_top))
-    return;
-
-  sbrked_mem += sbrk_size;
-
-  if (brk == old_end /* can just add bytes to current top, unless
-			previous correction failed */
-      && ((POINTER_UINT)old_end & (pagesz - 1)) == 0)
-  {
-    top_size = sbrk_size + old_top_size;
-    set_head(top, top_size | PREV_INUSE);
-  }
-  else
-  {
-    if (sbrk_base == (char*)(-1))  /* First time through. Record base */
-      sbrk_base = brk;
-    else  /* Someone else called sbrk().  Count those bytes as sbrked_mem. */
-      sbrked_mem += brk - (char*)old_end;
-
-    /* Guarantee alignment of first new chunk made from this space */
-    front_misalign = (POINTER_UINT)chunk2mem(brk) & MALLOC_ALIGN_MASK;
-    if (front_misalign > 0) 
-    {
-      correction = (MALLOC_ALIGNMENT) - front_misalign;
-      brk += correction;
-    }
-    else
-      correction = 0;
-
-    /* Guarantee the next brk will be at a page boundary */
-    correction += pagesz - ((POINTER_UINT)(brk + sbrk_size) & (pagesz - 1));
-
-    /* Allocate correction */
-    new_brk = (char*)(MORECORE (correction));
-    if (new_brk == (char*)(MORECORE_FAILURE))
-      {
-	correction = 0;
-	correction_failed = 1;
-	new_brk = brk;
-      }
-
-    sbrked_mem += correction;
-
-    top = (mchunkptr)brk;
-    top_size = new_brk - brk + correction;
-    set_head(top, top_size | PREV_INUSE);
-
-    if (old_top != initial_top)
-    {
-
-      /* There must have been an intervening foreign sbrk call. */
-      /* A double fencepost is necessary to prevent consolidation */
-
-      /* If not enough space to do this, then user did something very wrong */
-      if (old_top_size < MINSIZE) 
-      {
-        set_head(top, PREV_INUSE); /* will force null return from malloc */
-        return;
-      }
-
-      /* Also keep size a multiple of MALLOC_ALIGNMENT */
-      old_top_size = (old_top_size - 3*SIZE_SZ) & ~MALLOC_ALIGN_MASK;
-      set_head_size(old_top, old_top_size);
-      chunk_at_offset(old_top, old_top_size          )->size =
-        SIZE_SZ|PREV_INUSE;
-      chunk_at_offset(old_top, old_top_size + SIZE_SZ)->size =
-        SIZE_SZ|PREV_INUSE;
-      /* If possible, release the rest. */
-      if (old_top_size >= MINSIZE) 
-        fREe(RCALL chunk2mem(old_top));
-    }
-  }
-
-  if ((unsigned long)sbrked_mem > (unsigned long)max_sbrked_mem) 
-    max_sbrked_mem = sbrked_mem;
-#if HAVE_MMAP
-  if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem) 
-    max_total_mem = mmapped_mem + sbrked_mem;
-#else
-  if ((unsigned long)(sbrked_mem) > (unsigned long)max_total_mem) 
-    max_total_mem = sbrked_mem;
-#endif
-
-  /* We always land on a page boundary */
-  assert(((unsigned long)((char*)top + top_size) & (pagesz - 1)) == 0
-	 || correction_failed);
-}
-
-#endif /* DEFINE_MALLOC */
-
-
-/* Main public routines */
-
-#ifdef DEFINE_MALLOC
-
-/*
-  Malloc Algorthim:
-
-    The requested size is first converted into a usable form, `nb'.
-    This currently means to add 4 bytes overhead plus possibly more to
-    obtain 8-byte alignment and/or to obtain a size of at least
-    MINSIZE (currently 16 bytes), the smallest allocatable size.
-    (All fits are considered `exact' if they are within MINSIZE bytes.)
-
-    From there, the first successful of the following steps is taken:
-
-      1. The bin corresponding to the request size is scanned, and if
-         a chunk of exactly the right size is found, it is taken.
-
-      2. The most recently remaindered chunk is used if it is big
-         enough.  This is a form of (roving) first fit, used only in
-         the absence of exact fits. Runs of consecutive requests use
-         the remainder of the chunk used for the previous such request
-         whenever possible. This limited use of a first-fit style
-         allocation strategy tends to give contiguous chunks
-         coextensive lifetimes, which improves locality and can reduce
-         fragmentation in the long run.
-
-      3. Other bins are scanned in increasing size order, using a
-         chunk big enough to fulfill the request, and splitting off
-         any remainder.  This search is strictly by best-fit; i.e.,
-         the smallest (with ties going to approximately the least
-         recently used) chunk that fits is selected.
-
-      4. If large enough, the chunk bordering the end of memory
-         (`top') is split off. (This use of `top' is in accord with
-         the best-fit search rule.  In effect, `top' is treated as
-         larger (and thus less well fitting) than any other available
-         chunk since it can be extended to be as large as necessary
-         (up to system limitations).
-
-      5. If the request size meets the mmap threshold and the
-         system supports mmap, and there are few enough currently
-         allocated mmapped regions, and a call to mmap succeeds,
-         the request is allocated via direct memory mapping.
-
-      6. Otherwise, the top of memory is extended by
-         obtaining more space from the system (normally using sbrk,
-         but definable to anything else via the MORECORE macro).
-         Memory is gathered from the system (in system page-sized
-         units) in a way that allows chunks obtained across different
-         sbrk calls to be consolidated, but does not require
-         contiguous memory. Thus, it should be safe to intersperse
-         mallocs with other sbrk calls.
-
-
-      All allocations are made from the the `lowest' part of any found
-      chunk. (The implementation invariant is that prev_inuse is
-      always true of any allocated chunk; i.e., that each allocated
-      chunk borders either a previously allocated and still in-use chunk,
-      or the base of its memory arena.)
-
-*/
-
-#if __STD_C
-Void_t* mALLOc(RARG size_t bytes)
-#else
-Void_t* mALLOc(RARG bytes) RDECL size_t bytes;
-#endif
-{
-#ifdef MALLOC_PROVIDED
-
-  malloc (bytes);
-
-#else
-
-  mchunkptr victim;                  /* inspected/selected chunk */
-  INTERNAL_SIZE_T victim_size;       /* its size */
-  int       idx;                     /* index for bin traversal */
-  mbinptr   bin;                     /* associated bin */
-  mchunkptr remainder;               /* remainder from a split */
-  long      remainder_size;          /* its size */
-  int       remainder_index;         /* its bin index */
-  unsigned long block;               /* block traverser bit */
-  int       startidx;                /* first bin of a traversed block */
-  mchunkptr fwd;                     /* misc temp for linking */
-  mchunkptr bck;                     /* misc temp for linking */
-  mbinptr q;                         /* misc temp */
-
-  INTERNAL_SIZE_T nb  = request2size(bytes);  /* padded request size; */
-
-  /* Check for overflow and just fail, if so. */
-  if (nb > INT_MAX || nb < bytes)
-    return 0;
-
-  MALLOC_LOCK;
-
-  /* Check for exact match in a bin */
-
-  if (is_small_request(nb))  /* Faster version for small requests */
-  {
-    idx = smallbin_index(nb); 
-
-    /* No traversal or size check necessary for small bins.  */
-
-    q = bin_at(idx);
-    victim = last(q);
-
-#if MALLOC_ALIGN != 16
-    /* Also scan the next one, since it would have a remainder < MINSIZE */
-    if (victim == q)
-    {
-      q = next_bin(q);
-      victim = last(q);
-    }
-#endif
-    if (victim != q)
-    {
-      victim_size = chunksize(victim);
-      unlink(victim, bck, fwd);
-      set_inuse_bit_at_offset(victim, victim_size);
-      check_malloced_chunk(victim, nb);
-      MALLOC_UNLOCK;
-      return chunk2mem(victim);
-    }
-
-    idx += 2; /* Set for bin scan below. We've already scanned 2 bins. */
-
-  }
-  else
-  {
-    idx = bin_index(nb);
-    bin = bin_at(idx);
-
-    for (victim = last(bin); victim != bin; victim = victim->bk)
-    {
-      victim_size = chunksize(victim);
-      remainder_size = long_sub_size_t(victim_size, nb);
-      
-      if (remainder_size >= (long)MINSIZE) /* too big */
-      {
-        --idx; /* adjust to rescan below after checking last remainder */
-        break;   
-      }
-
-      else if (remainder_size >= 0) /* exact fit */
-      {
-        unlink(victim, bck, fwd);
-        set_inuse_bit_at_offset(victim, victim_size);
-        check_malloced_chunk(victim, nb);
-	MALLOC_UNLOCK;
-        return chunk2mem(victim);
-      }
-    }
-
-    ++idx; 
-
-  }
-
-  /* Try to use the last split-off remainder */
-
-  if ( (victim = last_remainder->fd) != last_remainder)
-  {
-    victim_size = chunksize(victim);
-    remainder_size = long_sub_size_t(victim_size, nb);
-
-    if (remainder_size >= (long)MINSIZE) /* re-split */
-    {
-      remainder = chunk_at_offset(victim, nb);
-      set_head(victim, nb | PREV_INUSE);
-      link_last_remainder(remainder);
-      set_head(remainder, remainder_size | PREV_INUSE);
-      set_foot(remainder, remainder_size);
-      check_malloced_chunk(victim, nb);
-      MALLOC_UNLOCK;
-      return chunk2mem(victim);
-    }
-
-    clear_last_remainder;
-
-    if (remainder_size >= 0)  /* exhaust */
-    {
-      set_inuse_bit_at_offset(victim, victim_size);
-      check_malloced_chunk(victim, nb);
-      MALLOC_UNLOCK;
-      return chunk2mem(victim);
-    }
-
-    /* Else place in bin */
-
-    frontlink(victim, victim_size, remainder_index, bck, fwd);
-  }
-
-  /* 
-     If there are any possibly nonempty big-enough blocks, 
-     search for best fitting chunk by scanning bins in blockwidth units.
-  */
-
-  if ( (block = idx2binblock(idx)) <= binblocks)  
-  {
-
-    /* Get to the first marked block */
-
-    if ( (block & binblocks) == 0) 
-    {
-      /* force to an even block boundary */
-      idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH;
-      block <<= 1;
-      while ((block & binblocks) == 0)
-      {
-        idx += BINBLOCKWIDTH;
-        block <<= 1;
-      }
-    }
-      
-    /* For each possibly nonempty block ... */
-    for (;;)  
-    {
-      startidx = idx;          /* (track incomplete blocks) */
-      q = bin = bin_at(idx);
-
-      /* For each bin in this block ... */
-      do
-      {
-        /* Find and use first big enough chunk ... */
-
-        for (victim = last(bin); victim != bin; victim = victim->bk)
-        {
-          victim_size = chunksize(victim);
-          remainder_size = long_sub_size_t(victim_size, nb);
-
-          if (remainder_size >= (long)MINSIZE) /* split */
-          {
-            remainder = chunk_at_offset(victim, nb);
-            set_head(victim, nb | PREV_INUSE);
-            unlink(victim, bck, fwd);
-            link_last_remainder(remainder);
-            set_head(remainder, remainder_size | PREV_INUSE);
-            set_foot(remainder, remainder_size);
-            check_malloced_chunk(victim, nb);
-	    MALLOC_UNLOCK;
-            return chunk2mem(victim);
-          }
-
-          else if (remainder_size >= 0)  /* take */
-          {
-            set_inuse_bit_at_offset(victim, victim_size);
-            unlink(victim, bck, fwd);
-            check_malloced_chunk(victim, nb);
-	    MALLOC_UNLOCK;
-            return chunk2mem(victim);
-          }
-
-        }
-
-       bin = next_bin(bin);
-
-#if MALLOC_ALIGN == 16
-       if (idx < MAX_SMALLBIN)
-         {
-           bin = next_bin(bin);
-           ++idx;
-         }
-#endif
-      } while ((++idx & (BINBLOCKWIDTH - 1)) != 0);
-
-      /* Clear out the block bit. */
-
-      do   /* Possibly backtrack to try to clear a partial block */
-      {
-        if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
-        {
-          binblocks &= ~block;
-          break;
-        }
-        --startidx;
-       q = prev_bin(q);
-      } while (first(q) == q);
-
-      /* Get to the next possibly nonempty block */
-
-      if ( (block <<= 1) <= binblocks && (block != 0) ) 
-      {
-        while ((block & binblocks) == 0)
-        {
-          idx += BINBLOCKWIDTH;
-          block <<= 1;
-        }
-      }
-      else
-        break;
-    }
-  }
-
-
-  /* Try to use top chunk */
-
-  /* Require that there be a remainder, ensuring top always exists  */
-  remainder_size = long_sub_size_t(chunksize(top), nb);
-  if (chunksize(top) < nb || remainder_size < (long)MINSIZE)
-  {
-
-#if HAVE_MMAP
-    /* If big and would otherwise need to extend, try to use mmap instead */
-    if ((unsigned long)nb >= (unsigned long)mmap_threshold &&
-        (victim = mmap_chunk(nb)) != 0)
-    {
-      MALLOC_UNLOCK;
-      return chunk2mem(victim);
-    }
-#endif
-
-    /* Try to extend */
-    malloc_extend_top(RCALL nb);
-    remainder_size = long_sub_size_t(chunksize(top), nb);
-    if (chunksize(top) < nb || remainder_size < (long)MINSIZE)
-    {
-      MALLOC_UNLOCK;
-      return 0; /* propagate failure */
-    }
-  }
-
-  victim = top;
-  set_head(victim, nb | PREV_INUSE);
-  top = chunk_at_offset(victim, nb);
-  set_head(top, remainder_size | PREV_INUSE);
-  check_malloced_chunk(victim, nb);
-  MALLOC_UNLOCK;
-  return chunk2mem(victim);
-
-#endif /* MALLOC_PROVIDED */
-}
-
-#endif /* DEFINE_MALLOC */
-
-#ifdef DEFINE_FREE
-
-/*
-
-  free() algorithm :
-
-    cases:
-
-       1. free(0) has no effect.  
-
-       2. If the chunk was allocated via mmap, it is release via munmap().
-
-       3. If a returned chunk borders the current high end of memory,
-          it is consolidated into the top, and if the total unused
-          topmost memory exceeds the trim threshold, malloc_trim is
-          called.
-
-       4. Other chunks are consolidated as they arrive, and
-          placed in corresponding bins. (This includes the case of
-          consolidating with the current `last_remainder').
-
-*/
-
-
-#if __STD_C
-void fREe(RARG Void_t* mem)
-#else
-void fREe(RARG mem) RDECL Void_t* mem;
-#endif
-{
-#ifdef MALLOC_PROVIDED
-
-  free (mem);
-
-#else
-
-  mchunkptr p;         /* chunk corresponding to mem */
-  INTERNAL_SIZE_T hd;  /* its head field */
-  INTERNAL_SIZE_T sz;  /* its size */
-  int       idx;       /* its bin index */
-  mchunkptr next;      /* next contiguous chunk */
-  INTERNAL_SIZE_T nextsz; /* its size */
-  INTERNAL_SIZE_T prevsz; /* size of previous contiguous chunk */
-  mchunkptr bck;       /* misc temp for linking */
-  mchunkptr fwd;       /* misc temp for linking */
-  int       islr;      /* track whether merging with last_remainder */
-
-  if (mem == 0)                              /* free(0) has no effect */
-    return;
-
-  MALLOC_LOCK;
-
-  p = mem2chunk(mem);
-  hd = p->size;
-
-#if HAVE_MMAP
-  if (hd & IS_MMAPPED)                       /* release mmapped memory. */
-  {
-    munmap_chunk(p);
-    MALLOC_UNLOCK;
-    return;
-  }
-#endif
-  
-  check_inuse_chunk(p);
-  
-  sz = hd & ~PREV_INUSE;
-  next = chunk_at_offset(p, sz);
-  nextsz = chunksize(next);
-  
-  if (next == top)                            /* merge with top */
-  {
-    sz += nextsz;
-
-    if (!(hd & PREV_INUSE))                    /* consolidate backward */
-    {
-      prevsz = p->prev_size;
-      p = chunk_at_offset(p, -prevsz);
-      sz += prevsz;
-      unlink(p, bck, fwd);
-    }
-
-    set_head(p, sz | PREV_INUSE);
-    top = p;
-    if ((unsigned long)(sz) >= (unsigned long)trim_threshold) 
-      malloc_trim(RCALL top_pad); 
-    MALLOC_UNLOCK;
-    return;
-  }
-
-  set_head(next, nextsz);                    /* clear inuse bit */
-
-  islr = 0;
-
-  if (!(hd & PREV_INUSE))                    /* consolidate backward */
-  {
-    prevsz = p->prev_size;
-    p = chunk_at_offset(p, -prevsz);
-    sz += prevsz;
-    
-    if (p->fd == last_remainder)             /* keep as last_remainder */
-      islr = 1;
-    else
-      unlink(p, bck, fwd);
-  }
-  
-  if (!(inuse_bit_at_offset(next, nextsz)))   /* consolidate forward */
-  {
-    sz += nextsz;
-    
-    if (!islr && next->fd == last_remainder)  /* re-insert last_remainder */
-    {
-      islr = 1;
-      link_last_remainder(p);   
-    }
-    else
-      unlink(next, bck, fwd);
-  }
-
-
-  set_head(p, sz | PREV_INUSE);
-  set_foot(p, sz);
-  if (!islr)
-    frontlink(p, sz, idx, bck, fwd);  
-
-  MALLOC_UNLOCK;
-
-#endif /* MALLOC_PROVIDED */
-}
-
-#endif /* DEFINE_FREE */
-
-#ifdef DEFINE_REALLOC
-
-/*
-
-  Realloc algorithm:
-
-    Chunks that were obtained via mmap cannot be extended or shrunk
-    unless HAVE_MREMAP is defined, in which case mremap is used.
-    Otherwise, if their reallocation is for additional space, they are
-    copied.  If for less, they are just left alone.
-
-    Otherwise, if the reallocation is for additional space, and the
-    chunk can be extended, it is, else a malloc-copy-free sequence is
-    taken.  There are several different ways that a chunk could be
-    extended. All are tried:
-
-       * Extending forward into following adjacent free chunk.
-       * Shifting backwards, joining preceding adjacent space
-       * Both shifting backwards and extending forward.
-       * Extending into newly sbrked space
-
-    Unless the #define REALLOC_ZERO_BYTES_FREES is set, realloc with a
-    size argument of zero (re)allocates a minimum-sized chunk.
-
-    If the reallocation is for less space, and the new request is for
-    a `small' (<512 bytes) size, then the newly unused space is lopped
-    off and freed.
-
-    The old unix realloc convention of allowing the last-free'd chunk
-    to be used as an argument to realloc is no longer supported.
-    I don't know of any programs still relying on this feature,
-    and allowing it would also allow too many other incorrect 
-    usages of realloc to be sensible.
-
-
-*/
-
-
-#if __STD_C
-Void_t* rEALLOc(RARG Void_t* oldmem, size_t bytes)
-#else
-Void_t* rEALLOc(RARG oldmem, bytes) RDECL Void_t* oldmem; size_t bytes;
-#endif
-{
-#ifdef MALLOC_PROVIDED
-
-  realloc (oldmem, bytes);
-
-#else
-
-  INTERNAL_SIZE_T    nb;      /* padded request size */
-
-  mchunkptr oldp;             /* chunk corresponding to oldmem */
-  INTERNAL_SIZE_T    oldsize; /* its size */
-
-  mchunkptr newp;             /* chunk to return */
-  INTERNAL_SIZE_T    newsize; /* its size */
-  Void_t*   newmem;           /* corresponding user mem */
-
-  mchunkptr next;             /* next contiguous chunk after oldp */
-  INTERNAL_SIZE_T  nextsize;  /* its size */
-
-  mchunkptr prev;             /* previous contiguous chunk before oldp */
-  INTERNAL_SIZE_T  prevsize;  /* its size */
-
-  mchunkptr remainder;        /* holds split off extra space from newp */
-  INTERNAL_SIZE_T  remainder_size;   /* its size */
-
-  mchunkptr bck;              /* misc temp for linking */
-  mchunkptr fwd;              /* misc temp for linking */
-
-#ifdef REALLOC_ZERO_BYTES_FREES
-  if (bytes == 0) { fREe(RCALL oldmem); return 0; }
-#endif
-
-
-  /* realloc of null is supposed to be same as malloc */
-  if (oldmem == 0) return mALLOc(RCALL bytes);
-
-  MALLOC_LOCK;
-
-  newp    = oldp    = mem2chunk(oldmem);
-  newsize = oldsize = chunksize(oldp);
-
-
-  nb = request2size(bytes);
-
-  /* Check for overflow and just fail, if so. */
-  if (nb > INT_MAX || nb < bytes)
-    return 0;
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(oldp)) 
-  {
-#if HAVE_MREMAP
-    newp = mremap_chunk(oldp, nb);
-    if(newp)
-    {
-      MALLOC_UNLOCK;
-      return chunk2mem(newp);
-    }
-#endif
-    /* Note the extra SIZE_SZ overhead. */
-    if(oldsize - SIZE_SZ >= nb)
-    {
-      MALLOC_UNLOCK;
-      return oldmem; /* do nothing */
-    }
-    /* Must alloc, copy, free. */
-    newmem = mALLOc(RCALL bytes);
-    if (newmem == 0)
-    {
-      MALLOC_UNLOCK;
-      return 0; /* propagate failure */
-    }
-    MALLOC_COPY(newmem, oldmem, oldsize - 2*SIZE_SZ);
-    munmap_chunk(oldp);
-    MALLOC_UNLOCK;
-    return newmem;
-  }
-#endif
-
-  check_inuse_chunk(oldp);
-
-  if ((long)(oldsize) < (long)(nb))  
-  {
-
-    /* Try expanding forward */
-
-    next = chunk_at_offset(oldp, oldsize);
-    if (next == top || !inuse(next)) 
-    {
-      nextsize = chunksize(next);
-
-      /* Forward into top only if a remainder */
-      if (next == top)
-      {
-        if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE))
-        {
-          newsize += nextsize;
-          top = chunk_at_offset(oldp, nb);
-          set_head(top, (newsize - nb) | PREV_INUSE);
-          set_head_size(oldp, nb);
-	  MALLOC_UNLOCK;
-          return chunk2mem(oldp);
-        }
-      }
-
-      /* Forward into next chunk */
-      else if (((long)(nextsize + newsize) >= (long)(nb)))
-      { 
-        unlink(next, bck, fwd);
-        newsize  += nextsize;
-        goto split;
-      }
-    }
-    else
-    {
-      next = 0;
-      nextsize = 0;
-    }
-
-    /* Try shifting backwards. */
-
-    if (!prev_inuse(oldp))
-    {
-      prev = prev_chunk(oldp);
-      prevsize = chunksize(prev);
-
-      /* try forward + backward first to save a later consolidation */
-
-      if (next != 0)
-      {
-        /* into top */
-        if (next == top)
-        {
-          if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE))
-          {
-            unlink(prev, bck, fwd);
-            newp = prev;
-            newsize += prevsize + nextsize;
-            newmem = chunk2mem(newp);
-            MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-            top = chunk_at_offset(newp, nb);
-            set_head(top, (newsize - nb) | PREV_INUSE);
-            set_head_size(newp, nb);
-	    MALLOC_UNLOCK;
-            return newmem;
-          }
-        }
-
-        /* into next chunk */
-        else if (((long)(nextsize + prevsize + newsize) >= (long)(nb)))
-        {
-          unlink(next, bck, fwd);
-          unlink(prev, bck, fwd);
-          newp = prev;
-          newsize += nextsize + prevsize;
-          newmem = chunk2mem(newp);
-          MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-          goto split;
-        }
-      }
-      
-      /* backward only */
-      if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)  
-      {
-        unlink(prev, bck, fwd);
-        newp = prev;
-        newsize += prevsize;
-        newmem = chunk2mem(newp);
-        MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-        goto split;
-      }
-    }
-
-    /* Must allocate */
-
-    newmem = mALLOc (RCALL bytes);
-
-    if (newmem == 0)  /* propagate failure */
-    {
-      MALLOC_UNLOCK;
-      return 0;
-    }
-
-    /* Avoid copy if newp is next chunk after oldp. */
-    /* (This can only happen when new chunk is sbrk'ed.) */
-
-    if ( (newp = mem2chunk(newmem)) == next_chunk(oldp)) 
-    {
-      newsize += chunksize(newp);
-      newp = oldp;
-      goto split;
-    }
-
-    /* Otherwise copy, free, and exit */
-    MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ);
-    fREe(RCALL oldmem);
-    MALLOC_UNLOCK;
-    return newmem;
-  }
-
-
- split:  /* split off extra room in old or expanded chunk */
-
-  remainder_size = long_sub_size_t(newsize, nb);
-
-  if (remainder_size >= (long)MINSIZE) /* split off remainder */
-  {
-    remainder = chunk_at_offset(newp, nb);
-    set_head_size(newp, nb);
-    set_head(remainder, remainder_size | PREV_INUSE);
-    set_inuse_bit_at_offset(remainder, remainder_size);
-    fREe(RCALL chunk2mem(remainder)); /* let free() deal with it */
-  }
-  else
-  {
-    set_head_size(newp, newsize);
-    set_inuse_bit_at_offset(newp, newsize);
-  }
-
-  check_inuse_chunk(newp);
-  MALLOC_UNLOCK;
-  return chunk2mem(newp);
-
-#endif /* MALLOC_PROVIDED */
-}
-
-#endif /* DEFINE_REALLOC */
-
-#ifdef DEFINE_MEMALIGN
-
-/*
-
-  memalign algorithm:
-
-    memalign requests more than enough space from malloc, finds a spot
-    within that chunk that meets the alignment request, and then
-    possibly frees the leading and trailing space. 
-
-    The alignment argument must be a power of two. This property is not
-    checked by memalign, so misuse may result in random runtime errors.
-
-    8-byte alignment is guaranteed by normal malloc calls, so don't
-    bother calling memalign with an argument of 8 or less.
-
-    Overreliance on memalign is a sure way to fragment space.
-
-*/
-
-
-#if __STD_C
-Void_t* mEMALIGn(RARG size_t alignment, size_t bytes)
-#else
-Void_t* mEMALIGn(RARG alignment, bytes) RDECL size_t alignment; size_t bytes;
-#endif
-{
-  INTERNAL_SIZE_T    nb;      /* padded  request size */
-  char*     m;                /* memory returned by malloc call */
-  mchunkptr p;                /* corresponding chunk */
-  char*     brk;              /* alignment point within p */
-  mchunkptr newp;             /* chunk to return */
-  INTERNAL_SIZE_T  newsize;   /* its size */
-  INTERNAL_SIZE_T  leadsize;  /* leading space befor alignment point */
-  mchunkptr remainder;        /* spare room at end to split off */
-  long      remainder_size;   /* its size */
-
-  /* If need less alignment than we give anyway, just relay to malloc */
-
-  if (alignment <= MALLOC_ALIGNMENT) return mALLOc(RCALL bytes);
-
-  /* Otherwise, ensure that it is at least a minimum chunk size */
-  
-  if (alignment <  MINSIZE) alignment = MINSIZE;
-
-  /* Call malloc with worst case padding to hit alignment. */
-
-  nb = request2size(bytes);
-
-  /* Check for overflow. */
-  if (nb > INT_MAX || nb < bytes)
-    return 0;
-
-  m  = (char*)(mALLOc(RCALL nb + alignment + MINSIZE));
-
-  if (m == 0) return 0; /* propagate failure */
-
-  MALLOC_LOCK;
-
-  p = mem2chunk(m);
-
-  if ((((unsigned long)(m)) % alignment) == 0) /* aligned */
-  {
-#if HAVE_MMAP
-    if(chunk_is_mmapped(p))
-    {
-      MALLOC_UNLOCK;
-      return chunk2mem(p); /* nothing more to do */
-    }
-#endif
-  }
-  else /* misaligned */
-  {
-    /* 
-      Find an aligned spot inside chunk.
-      Since we need to give back leading space in a chunk of at 
-      least MINSIZE, if the first calculation places us at
-      a spot with less than MINSIZE leader, we can move to the
-      next aligned spot -- we've allocated enough total room so that
-      this is always possible.
-    */
-
-    brk = (char*)mem2chunk(((unsigned long)(m + alignment - 1)) & -alignment);
-    if ((long)(brk - (char*)(p)) < (long)MINSIZE) brk = brk + alignment;
-
-    newp = (mchunkptr)brk;
-    leadsize = brk - (char*)(p);
-    newsize = chunksize(p) - leadsize;
-
-#if HAVE_MMAP
-    if(chunk_is_mmapped(p)) 
-    {
-      newp->prev_size = p->prev_size + leadsize;
-      set_head(newp, newsize|IS_MMAPPED);
-      MALLOC_UNLOCK;
-      return chunk2mem(newp);
-    }
-#endif
-
-    /* give back leader, use the rest */
-
-    set_head(newp, newsize | PREV_INUSE);
-    set_inuse_bit_at_offset(newp, newsize);
-    set_head_size(p, leadsize);
-    fREe(RCALL chunk2mem(p));
-    p = newp;
-
-    assert (newsize >= nb && (((unsigned long)(chunk2mem(p))) % alignment) == 0);
-  }
-
-  /* Also give back spare room at the end */
-
-  remainder_size = long_sub_size_t(chunksize(p), nb);
-
-  if (remainder_size >= (long)MINSIZE)
-  {
-    remainder = chunk_at_offset(p, nb);
-    set_head(remainder, remainder_size | PREV_INUSE);
-    set_head_size(p, nb);
-    fREe(RCALL chunk2mem(remainder));
-  }
-
-  check_inuse_chunk(p);
-  MALLOC_UNLOCK;
-  return chunk2mem(p);
-
-}
-
-#endif /* DEFINE_MEMALIGN */
-
-#ifdef DEFINE_VALLOC
-
-/*
-    valloc just invokes memalign with alignment argument equal
-    to the page size of the system (or as near to this as can
-    be figured out from all the includes/defines above.)
-*/
-
-#if __STD_C
-Void_t* vALLOc(RARG size_t bytes)
-#else
-Void_t* vALLOc(RARG bytes) RDECL size_t bytes;
-#endif
-{
-  return mEMALIGn (RCALL malloc_getpagesize, bytes);
-}
-
-#endif /* DEFINE_VALLOC */
-
-#ifdef DEFINE_PVALLOC
-
-/* 
-  pvalloc just invokes valloc for the nearest pagesize
-  that will accommodate request
-*/
-
-
-#if __STD_C
-Void_t* pvALLOc(RARG size_t bytes)
-#else
-Void_t* pvALLOc(RARG bytes) RDECL size_t bytes;
-#endif
-{
-  size_t pagesize = malloc_getpagesize;
-  return mEMALIGn (RCALL pagesize, (bytes + pagesize - 1) & ~(pagesize - 1));
-}
-
-#endif /* DEFINE_PVALLOC */
-
-#ifdef DEFINE_CALLOC
-
-/*
-
-  calloc calls malloc, then zeroes out the allocated chunk.
-
-*/
-
-#if __STD_C
-Void_t* cALLOc(RARG size_t n, size_t elem_size)
-#else
-Void_t* cALLOc(RARG n, elem_size) RDECL size_t n; size_t elem_size;
-#endif
-{
-  mchunkptr p;
-  INTERNAL_SIZE_T csz;
-
-  INTERNAL_SIZE_T sz = n * elem_size;
-
-#if MORECORE_CLEARS
-  mchunkptr oldtop;
-  INTERNAL_SIZE_T oldtopsize;
-#endif
-  Void_t* mem;
-
-  /* check if expand_top called, in which case don't need to clear */
-#if MORECORE_CLEARS
-  MALLOC_LOCK;
-  oldtop = top;
-  oldtopsize = chunksize(top);
-#endif
-
-  mem = mALLOc (RCALL sz);
-
-  if (mem == 0) 
-  {
-#if MORECORE_CLEARS
-    MALLOC_UNLOCK;
-#endif
-    return 0;
-  }
-  else
-  {
-    p = mem2chunk(mem);
-
-    /* Two optional cases in which clearing not necessary */
-
-
-#if HAVE_MMAP
-    if (chunk_is_mmapped(p))
-    {
-#if MORECORE_CLEARS
-      MALLOC_UNLOCK;
-#endif
-      return mem;
-    }
-#endif
-
-    csz = chunksize(p);
-
-#if MORECORE_CLEARS
-    if (p == oldtop && csz > oldtopsize) 
-    {
-      /* clear only the bytes from non-freshly-sbrked memory */
-      csz = oldtopsize;
-    }
-    MALLOC_UNLOCK;
-#endif
-
-    MALLOC_ZERO(mem, csz - SIZE_SZ);
-    return mem;
-  }
-}
-
-#endif /* DEFINE_CALLOC */
-
-#if defined(DEFINE_CFREE) && !defined(__CYGWIN__)
-
-/*
- 
-  cfree just calls free. It is needed/defined on some systems
-  that pair it with calloc, presumably for odd historical reasons.
-
-*/
-
-#if !defined(INTERNAL_LINUX_C_LIB) || !defined(__ELF__)
-#if !defined(INTERNAL_NEWLIB) || !defined(_REENT_ONLY)
-#if __STD_C
-void cfree(Void_t *mem)
-#else
-void cfree(mem) Void_t *mem;
-#endif
-{
-#ifdef INTERNAL_NEWLIB
-  fREe(_REENT, mem);
-#else
-  fREe(mem);
-#endif
-}
-#endif
-#endif
-
-#endif /* DEFINE_CFREE */
-
-#ifdef DEFINE_FREE
-
-/*
-
-    Malloc_trim gives memory back to the system (via negative
-    arguments to sbrk) if there is unused memory at the `high' end of
-    the malloc pool. You can call this after freeing large blocks of
-    memory to potentially reduce the system-level memory requirements
-    of a program. However, it cannot guarantee to reduce memory. Under
-    some allocation patterns, some large free blocks of memory will be
-    locked between two used chunks, so they cannot be given back to
-    the system.
-
-    The `pad' argument to malloc_trim represents the amount of free
-    trailing space to leave untrimmed. If this argument is zero,
-    only the minimum amount of memory to maintain internal data
-    structures will be left (one page or less). Non-zero arguments
-    can be supplied to maintain enough trailing space to service
-    future expected allocations without having to re-obtain memory
-    from the system.
-
-    Malloc_trim returns 1 if it actually released any memory, else 0.
-
-*/
-
-#if __STD_C
-int malloc_trim(RARG size_t pad)
-#else
-int malloc_trim(RARG pad) RDECL size_t pad;
-#endif
-{
-  long  top_size;        /* Amount of top-most memory */
-  long  extra;           /* Amount to release */
-  char* current_brk;     /* address returned by pre-check sbrk call */
-  char* new_brk;         /* address returned by negative sbrk call */
-
-  unsigned long pagesz = malloc_getpagesize;
-
-  MALLOC_LOCK;
-
-  top_size = chunksize(top);
-  extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz;
-
-  if (extra < (long)pagesz)  /* Not enough memory to release */
-  {
-    MALLOC_UNLOCK;
-    return 0;
-  }
-
-  else
-  {
-    /* Test to make sure no one else called sbrk */
-    current_brk = (char*)(MORECORE (0));
-    if (current_brk != (char*)(top) + top_size)
-    {
-      MALLOC_UNLOCK;
-      return 0;     /* Apparently we don't own memory; must fail */
-    }
-
-    else
-    {
-      new_brk = (char*)(MORECORE (-extra));
-      
-      if (new_brk == (char*)(MORECORE_FAILURE)) /* sbrk failed? */
-      {
-        /* Try to figure out what we have */
-        current_brk = (char*)(MORECORE (0));
-        top_size = current_brk - (char*)top;
-        if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */
-        {
-          sbrked_mem = current_brk - sbrk_base;
-          set_head(top, top_size | PREV_INUSE);
-        }
-        check_chunk(top);
-	MALLOC_UNLOCK;
-        return 0; 
-      }
-
-      else
-      {
-        /* Success. Adjust top accordingly. */
-        set_head(top, (top_size - extra) | PREV_INUSE);
-        sbrked_mem -= extra;
-        check_chunk(top);
-	MALLOC_UNLOCK;
-        return 1;
-      }
-    }
-  }
-}
-
-#endif /* DEFINE_FREE */
-
-#ifdef DEFINE_MALLOC_USABLE_SIZE
-
-/*
-  malloc_usable_size:
-
-    This routine tells you how many bytes you can actually use in an
-    allocated chunk, which may be more than you requested (although
-    often not). You can use this many bytes without worrying about
-    overwriting other allocated objects. Not a particularly great
-    programming practice, but still sometimes useful.
-
-*/
-
-#if __STD_C
-size_t malloc_usable_size(RARG Void_t* mem)
-#else
-size_t malloc_usable_size(RARG mem) RDECL Void_t* mem;
-#endif
-{
-  mchunkptr p;
-  if (mem == 0)
-    return 0;
-  else
-  {
-    p = mem2chunk(mem);
-    if(!chunk_is_mmapped(p))
-    {
-      if (!inuse(p)) return 0;
-#if DEBUG
-      MALLOC_LOCK;
-      check_inuse_chunk(p);
-      MALLOC_UNLOCK;
-#endif
-      return chunksize(p) - SIZE_SZ;
-    }
-    return chunksize(p) - 2*SIZE_SZ;
-  }
-}
-
-#endif /* DEFINE_MALLOC_USABLE_SIZE */
-
-#ifdef DEFINE_MALLINFO
-
-/* Utility to update current_mallinfo for malloc_stats and mallinfo() */
-
-STATIC void malloc_update_mallinfo() 
-{
-  int i;
-  mbinptr b;
-  mchunkptr p;
-#if DEBUG
-  mchunkptr q;
-#endif
-
-  INTERNAL_SIZE_T avail = chunksize(top);
-  int   navail = ((long)(avail) >= (long)MINSIZE)? 1 : 0;
-
-  for (i = 1; i < NAV; ++i)
-  {
-    b = bin_at(i);
-    for (p = last(b); p != b; p = p->bk) 
-    {
-#if DEBUG
-      check_free_chunk(p);
-      for (q = next_chunk(p); 
-           q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE; 
-           q = next_chunk(q))
-        check_inuse_chunk(q);
-#endif
-      avail += chunksize(p);
-      navail++;
-    }
-  }
-
-  current_mallinfo.ordblks = navail;
-  current_mallinfo.uordblks = sbrked_mem - avail;
-  current_mallinfo.fordblks = avail;
-#if HAVE_MMAP
-  current_mallinfo.hblks = n_mmaps;
-  current_mallinfo.hblkhd = mmapped_mem;
-#endif
-  current_mallinfo.keepcost = chunksize(top);
-
-}
-
-#else /* ! DEFINE_MALLINFO */
-
-#if __STD_C
-extern void malloc_update_mallinfo(void);
-#else
-extern void malloc_update_mallinfo();
-#endif
-
-#endif /* ! DEFINE_MALLINFO */
-
-#ifdef DEFINE_MALLOC_STATS
-
-/*
-
-  malloc_stats:
-
-    Prints on stderr the amount of space obtain from the system (both
-    via sbrk and mmap), the maximum amount (which may be more than
-    current if malloc_trim and/or munmap got called), the maximum
-    number of simultaneous mmap regions used, and the current number
-    of bytes allocated via malloc (or realloc, etc) but not yet
-    freed. (Note that this is the number of bytes allocated, not the
-    number requested. It will be larger than the number requested
-    because of alignment and bookkeeping overhead.)
-
-*/
-
-#if __STD_C
-void malloc_stats(RONEARG)
-#else
-void malloc_stats(RONEARG) RDECL
-#endif
-{
-  unsigned long local_max_total_mem;
-  int local_sbrked_mem;
-  struct mallinfo local_mallinfo;
-#if HAVE_MMAP
-  unsigned long local_mmapped_mem, local_max_n_mmaps;
-#endif
-  FILE *fp;
-
-  MALLOC_LOCK;
-  malloc_update_mallinfo();
-  local_max_total_mem = max_total_mem;
-  local_sbrked_mem = sbrked_mem;
-  local_mallinfo = current_mallinfo;
-#if HAVE_MMAP
-  local_mmapped_mem = mmapped_mem;
-  local_max_n_mmaps = max_n_mmaps;
-#endif
-  MALLOC_UNLOCK;
-
-#ifdef INTERNAL_NEWLIB
-  _REENT_SMALL_CHECK_INIT(_stderr_r (reent_ptr));
-  fp = _stderr_r(reent_ptr);
-#define fprintf fiprintf
-#else
-  fp = stderr;
-#endif
-
-  fprintf(fp, "max system bytes = %10u\n", 
-	  (unsigned int)(local_max_total_mem));
-#if HAVE_MMAP
-  fprintf(fp, "system bytes     = %10u\n", 
-	  (unsigned int)(local_sbrked_mem + local_mmapped_mem));
-  fprintf(fp, "in use bytes     = %10u\n", 
-	  (unsigned int)(local_mallinfo.uordblks + local_mmapped_mem));
-#else
-  fprintf(fp, "system bytes     = %10u\n", 
-	  (unsigned int)local_sbrked_mem);
-  fprintf(fp, "in use bytes     = %10u\n", 
-	  (unsigned int)local_mallinfo.uordblks);
-#endif
-#if HAVE_MMAP
-  fprintf(fp, "max mmap regions = %10u\n", 
-	  (unsigned int)local_max_n_mmaps);
-#endif
-}
-
-#endif /* DEFINE_MALLOC_STATS */
-
-#ifdef DEFINE_MALLINFO
-
-/*
-  mallinfo returns a copy of updated current mallinfo.
-*/
-
-#if __STD_C
-struct mallinfo mALLINFo(RONEARG)
-#else
-struct mallinfo mALLINFo(RONEARG) RDECL
-#endif
-{
-  struct mallinfo ret;
-
-  MALLOC_LOCK;
-  malloc_update_mallinfo();
-  ret = current_mallinfo;
-  MALLOC_UNLOCK;
-  return ret;
-}
-
-#endif /* DEFINE_MALLINFO */
-
-#ifdef DEFINE_MALLOPT
-
-/*
-  mallopt:
-
-    mallopt is the general SVID/XPG interface to tunable parameters.
-    The format is to provide a (parameter-number, parameter-value) pair.
-    mallopt then sets the corresponding parameter to the argument
-    value if it can (i.e., so long as the value is meaningful),
-    and returns 1 if successful else 0.
-
-    See descriptions of tunable parameters above.
-
-*/
-
-#if __STD_C
-int mALLOPt(RARG int param_number, int value)
-#else
-int mALLOPt(RARG param_number, value) RDECL int param_number; int value;
-#endif
-{
-  MALLOC_LOCK;
-  switch(param_number) 
-  {
-    case M_TRIM_THRESHOLD:
-      trim_threshold = value; MALLOC_UNLOCK; return 1; 
-    case M_TOP_PAD:
-      top_pad = value; MALLOC_UNLOCK; return 1; 
-    case M_MMAP_THRESHOLD:
-#if HAVE_MMAP
-      mmap_threshold = value;
-#endif
-      MALLOC_UNLOCK;
-      return 1;
-    case M_MMAP_MAX:
-#if HAVE_MMAP
-      n_mmaps_max = value; MALLOC_UNLOCK; return 1;
-#else
-      MALLOC_UNLOCK; return value == 0;
-#endif
-
-    default:
-      MALLOC_UNLOCK;
-      return 0;
-  }
-}
-
-#endif /* DEFINE_MALLOPT */
-
-/*
-
-History:
-
-    V2.6.3 Sun May 19 08:17:58 1996  Doug Lea  (dl at gee)
-      * Added pvalloc, as recommended by H.J. Liu
-      * Added 64bit pointer support mainly from Wolfram Gloger
-      * Added anonymously donated WIN32 sbrk emulation
-      * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen
-      * malloc_extend_top: fix mask error that caused wastage after
-        foreign sbrks
-      * Add linux mremap support code from HJ Liu
-   
-    V2.6.2 Tue Dec  5 06:52:55 1995  Doug Lea  (dl at gee)
-      * Integrated most documentation with the code.
-      * Add support for mmap, with help from 
-        Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
-      * Use last_remainder in more cases.
-      * Pack bins using idea from  colin@nyx10.cs.du.edu
-      * Use ordered bins instead of best-fit threshhold
-      * Eliminate block-local decls to simplify tracing and debugging.
-      * Support another case of realloc via move into top
-      * Fix error occuring when initial sbrk_base not word-aligned.  
-      * Rely on page size for units instead of SBRK_UNIT to
-        avoid surprises about sbrk alignment conventions.
-      * Add mallinfo, mallopt. Thanks to Raymond Nijssen
-        (raymond@es.ele.tue.nl) for the suggestion. 
-      * Add `pad' argument to malloc_trim and top_pad mallopt parameter.
-      * More precautions for cases where other routines call sbrk,
-        courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
-      * Added macros etc., allowing use in linux libc from
-        H.J. Lu (hjl@gnu.ai.mit.edu)
-      * Inverted this history list
-
-    V2.6.1 Sat Dec  2 14:10:57 1995  Doug Lea  (dl at gee)
-      * Re-tuned and fixed to behave more nicely with V2.6.0 changes.
-      * Removed all preallocation code since under current scheme
-        the work required to undo bad preallocations exceeds
-        the work saved in good cases for most test programs.
-      * No longer use return list or unconsolidated bins since
-        no scheme using them consistently outperforms those that don't
-        given above changes.
-      * Use best fit for very large chunks to prevent some worst-cases.
-      * Added some support for debugging
-
-    V2.6.0 Sat Nov  4 07:05:23 1995  Doug Lea  (dl at gee)
-      * Removed footers when chunks are in use. Thanks to
-        Paul Wilson (wilson@cs.texas.edu) for the suggestion.
-
-    V2.5.4 Wed Nov  1 07:54:51 1995  Doug Lea  (dl at gee)
-      * Added malloc_trim, with help from Wolfram Gloger 
-        (wmglo@Dent.MED.Uni-Muenchen.DE).
-
-    V2.5.3 Tue Apr 26 10:16:01 1994  Doug Lea  (dl at g)
-
-    V2.5.2 Tue Apr  5 16:20:40 1994  Doug Lea  (dl at g)
-      * realloc: try to expand in both directions
-      * malloc: swap order of clean-bin strategy;
-      * realloc: only conditionally expand backwards
-      * Try not to scavenge used bins
-      * Use bin counts as a guide to preallocation
-      * Occasionally bin return list chunks in first scan
-      * Add a few optimizations from colin@nyx10.cs.du.edu
-
-    V2.5.1 Sat Aug 14 15:40:43 1993  Doug Lea  (dl at g)
-      * faster bin computation & slightly different binning
-      * merged all consolidations to one part of malloc proper
-         (eliminating old malloc_find_space & malloc_clean_bin)
-      * Scan 2 returns chunks (not just 1)
-      * Propagate failure in realloc if malloc returns 0
-      * Add stuff to allow compilation on non-ANSI compilers 
-          from kpv@research.att.com
-     
-    V2.5 Sat Aug  7 07:41:59 1993  Doug Lea  (dl at g.oswego.edu)
-      * removed potential for odd address access in prev_chunk
-      * removed dependency on getpagesize.h
-      * misc cosmetics and a bit more internal documentation
-      * anticosmetics: mangled names in macros to evade debugger strangeness
-      * tested on sparc, hp-700, dec-mips, rs6000 
-          with gcc & native cc (hp, dec only) allowing
-          Detlefs & Zorn comparison study (in SIGPLAN Notices.)
-
-    Trial version Fri Aug 28 13:14:29 1992  Doug Lea  (dl at g.oswego.edu)
-      * Based loosely on libg++-1.2X malloc. (It retains some of the overall 
-         structure of old version,  but most details differ.)
-
-*/
-#endif
diff --git a/newlib/libc/stdlib/mbctype.h b/newlib/libc/stdlib/mbctype.h
deleted file mode 100644
index 6abcf3db0..000000000
--- a/newlib/libc/stdlib/mbctype.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _MBCTYPE_H_
-
-#define _MBCTYPE_H_
-
-/* escape character used for JIS encoding */
-#define ESC_CHAR 0x1b
-
-/* functions used to support SHIFT_JIS, EUC-JP, and JIS multibyte encodings */
-
-int _EXFUN(_issjis1, (int c));
-int _EXFUN(_issjis2, (int c));
-int _EXFUN(_iseucjp, (int c));
-int _EXFUN(_isjis, (int c));
-
-#define _issjis1(c)    (((c) >= 0x81 && (c) <= 0x9f) || ((c) >= 0xe0 && (c) <= 0xef))
-#define _issjis2(c)    (((c) >= 0x40 && (c) <= 0x7e) || ((c) >= 0x80 && (c) <= 0xfc))
-#define _iseucjp(c)    ((c) >= 0xa1 && (c) <= 0xfe)
-#define _isjis(c)      ((c) >= 0x21 && (c) <= 0x7e)
-
-#endif /* _MBCTYPE_H_ */
diff --git a/newlib/libc/stdlib/mblen.c b/newlib/libc/stdlib/mblen.c
deleted file mode 100644
index b1310956f..000000000
--- a/newlib/libc/stdlib/mblen.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-FUNCTION
-<<mblen>>---minimal multibyte length function
-
-INDEX
-	mblen
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int mblen(const char *<[s]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int mblen(<[s]>, <[n]>)
-	const char *<[s]>;
-	size_t <[n]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<mblen>>.  In this case, the
-only ``multi-byte character sequences'' recognized are single bytes,
-and thus <<1>> is returned unless <[s]> is the null pointer or
-has a length of 0 or is the empty string.
-
-When MB_CAPABLE is defined, this routine calls <<_mbtowc_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-RETURNS
-This implementation of <<mblen>> returns <<0>> if
-<[s]> is <<NULL>> or the empty string; it returns <<1>> if not MB_CAPABLE or
-the character is a single-byte character; it returns <<-1>>
-if the multi-byte character is invalid; otherwise it returns
-the number of bytes in the multibyte character.
-
-PORTABILITY
-<<mblen>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<mblen>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <wchar.h>
-
-int
-_DEFUN (mblen, (s, n), 
-        const char *s _AND
-        size_t n)
-{
-#ifdef MB_CAPABLE
-  int retval = 0;
-  mbstate_t *state;
-  
-  _REENT_CHECK_MISC(_REENT);
-  state = &(_REENT_MBLEN_STATE(_REENT));
-  retval = _mbtowc_r (_REENT, NULL, s, n, state);
-  if (retval < 0)
-    {
-      state->__count = 0;
-      return -1;
-    }
-  else
-    return retval;
-  
-#else /* not MB_CAPABLE */
-  if (s == NULL || *s == '\0')
-    return 0;
-  if (n == 0)
-    return -1;
-  return 1;
-#endif /* not MB_CAPABLE */
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/mblen_r.c b/newlib/libc/stdlib/mblen_r.c
deleted file mode 100644
index 1d6659743..000000000
--- a/newlib/libc/stdlib/mblen_r.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
-FUNCTION
-<<_mblen_r>>---reentrant minimal multibyte length function
-
-INDEX
-	_mblen_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int _mblen_r(struct _reent *<[r]>, const char *<[s]>, size_t <[n]>, int *<[state]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int _mblen_r(<[r]>, <[s]>, <[n]>, <[state]>)
-        struct _reent *<[r]>;
-	const char *<[s]>;
-	size_t <[n]>;
-        int *<[state]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<_mblen_r>>.  In this case, the
-only ``multi-byte character sequences'' recognized are single bytes,
-and thus <<1>> is returned unless <[s]> is the null pointer or
-has a length of 0 or is the empty string.
-
-When MB_CAPABLE is defined, this routine calls <<_mbtowc_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-RETURNS
-This implementation of <<_mblen_r>> returns <<0>> if
-<[s]> is <<NULL>> or the empty string; it returns <<1>> if not MB_CAPABLE or
-the character is a single-byte character; it returns <<-1>>
-if the multi-byte character is invalid; otherwise it returns
-the number of bytes in the multibyte character.
-
-PORTABILITY
-<<_mblen>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<_mblen_r>> requires no supporting OS subroutines.
-*/
-
-#include <stdlib.h>
-#include <wchar.h>
-
-int
-_DEFUN (_mblen_r, (r, s, n, state), 
-        struct _reent *r    _AND
-        const char *s _AND
-        size_t n _AND
-        mbstate_t *state)
-{
-#ifdef MB_CAPABLE
-  int retval;
-  retval = _mbtowc_r (r, NULL, s, n, state);
-
-  if (retval < 0)
-    {
-      state->__count = 0;
-      return -1;
-    }
-
-  return retval;
-#else /* not MB_CAPABLE */
-  if (s == NULL || *s == '\0')
-    return 0;
-  if (n == 0)
-    return -1;
-  return 1;
-#endif /* not MB_CAPABLE */
-}
-
diff --git a/newlib/libc/stdlib/mbrlen.c b/newlib/libc/stdlib/mbrlen.c
deleted file mode 100644
index 504348d38..000000000
--- a/newlib/libc/stdlib/mbrlen.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-
-size_t
-mbrlen(const char *s, size_t n, mbstate_t *ps)
-{
-#ifdef MB_CAPABLE
-  if (ps == NULL)
-    {
-      _REENT_CHECK_MISC(_REENT);
-      ps = &(_REENT_MBRLEN_STATE(_REENT));
-    }
-#endif
-
-  return mbrtowc(NULL, s, n, ps);
-}
diff --git a/newlib/libc/stdlib/mbrtowc.c b/newlib/libc/stdlib/mbrtowc.c
deleted file mode 100644
index 0db1208d0..000000000
--- a/newlib/libc/stdlib/mbrtowc.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-#include <string.h>
-
-size_t
-_DEFUN (_mbrtowc_r, (ptr, pwc, s, n, ps),
-	struct _reent *ptr _AND
-	wchar_t *pwc _AND
-	const char *s _AND
-	size_t n _AND
-	mbstate_t *ps)
-{
-  int retval = 0;
-
-#ifdef MB_CAPABLE
-  if (ps == NULL)
-    {
-      _REENT_CHECK_MISC(ptr);
-      ps = &(_REENT_MBRTOWC_STATE(ptr));
-    }
-#endif
-
-  if (s == NULL)
-    retval = _mbtowc_r (ptr, pwc, "", 1, ps);
-  else
-    retval = _mbtowc_r (ptr, pwc, s, n, ps);
-
-  if (retval == -1)
-    {
-      ps->__count = 0;
-      ptr->_errno = EILSEQ;
-      return (size_t)(-1);
-    }
-  else
-    return (size_t)retval;
-}
-
-#ifndef _REENT_ONLY
-size_t
-_DEFUN (mbrtowc, (pwc, s, n, ps),
-	wchar_t *pwc _AND
-	const char *s _AND
-	size_t n _AND
-	mbstate_t *ps)
-{
-  return _mbrtowc_r (_REENT, pwc, s, n, ps);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/mbsinit.c b/newlib/libc/stdlib/mbsinit.c
deleted file mode 100644
index a353cb1c1..000000000
--- a/newlib/libc/stdlib/mbsinit.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-
-int
-mbsinit(const mbstate_t *ps)
-{
-  if (ps == NULL || ps->__count == 0)
-    return 1;
-  else
-    return 0;
-}
diff --git a/newlib/libc/stdlib/mbsrtowcs.c b/newlib/libc/stdlib/mbsrtowcs.c
deleted file mode 100644
index 08d9d0c18..000000000
--- a/newlib/libc/stdlib/mbsrtowcs.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-
-size_t
-_DEFUN (_mbsrtowcs_r, (r, dst, src, n, ps), 
-	struct _reent *r _AND
-	wchar_t *dst _AND
-	const char **src _AND
-	size_t n _AND
-	mbstate_t *ps)
-{
-  wchar_t *ptr = dst;
-  size_t max = n;
-  int bytes;
-
-#ifdef MB_CAPABLE
-  if (ps == NULL)
-    {
-      _REENT_CHECK_MISC(r);
-      ps = &(_REENT_MBSRTOWCS_STATE(r));
-    }
-#endif
-
-  while (n > 0)
-    {
-      bytes = _mbtowc_r (r, ptr, *src, MB_CUR_MAX, ps);
-      if (bytes > 0)
-	{
-	  *src += bytes;
-	  ++ptr;
-	  --n;
-	}
-      else if (bytes == -2)
-	{
-	  *src += MB_CUR_MAX;
-	}
-      else if (bytes == 0)
-	{
-	  *src = NULL;
-	  return (size_t)(ptr - dst);
-	}
-      else
-	{
-	  ps->__count = 0;
-	  r->_errno = EILSEQ;
-	  return (size_t)-1;
-	}
-    }
-
-  return (size_t)max;
-}
-
-#ifndef _REENT_ONLY
-size_t
-_DEFUN (mbsrtowcs, (dst, src, len, ps),
-	wchar_t *dst _AND
-	const char **src _AND
-	size_t len _AND
-	mbstate_t *ps)
-{
-  return _mbsrtowcs_r (_REENT, dst, src, len, ps);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/mbstowcs.c b/newlib/libc/stdlib/mbstowcs.c
deleted file mode 100644
index cb09f31d0..000000000
--- a/newlib/libc/stdlib/mbstowcs.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-FUNCTION
-<<mbstowcs>>---minimal multibyte string to wide char converter
-
-INDEX
-	mbstowcs
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int mbstowcs(wchar_t *<[pwc]>, const char *<[s]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int mbstowcs(<[pwc]>, <[s]>, <[n]>)
-	wchar_t *<[pwc]>;
-	const char *<[s]>;
-	size_t <[n]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<mbstowcs>>.  In this case, the
-only ``multi-byte character sequences'' recognized are single bytes,
-and they are ``converted'' to wide-char versions simply by byte
-extension.
-
-When MB_CAPABLE is defined, this routine calls <<_mbstowcs_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-RETURNS
-This implementation of <<mbstowcs>> returns <<0>> if
-<[s]> is <<NULL>> or is the empty string; 
-it returns <<-1>> if MB_CAPABLE and one of the
-multi-byte characters is invalid or incomplete;
-otherwise it returns the minimum of: <<n>> or the
-number of multi-byte characters in <<s>> plus 1 (to
-compensate for the nul character).
-If the return value is -1, the state of the <<pwc>> string is
-indeterminate.  If the input has a length of 0, the output
-string will be modified to contain a wchar_t nul terminator.
-
-PORTABILITY
-<<mbstowcs>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<mbstowcs>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (mbstowcs, (pwcs, s, n),
-        wchar_t *pwcs _AND
-        const char *s _AND
-        size_t n)
-{
-#ifdef MB_CAPABLE
-  mbstate_t state;
-  state.__count = 0;
-  
-  return _mbstowcs_r (_REENT, pwcs, s, n, &state);
-#else /* not MB_CAPABLE */
-  
-  int count = 0;
-  
-  if (n != 0) {
-    do {
-      if ((*pwcs++ = (wchar_t) *s++) == 0)
-	break;
-      count++;
-    } while (--n != 0);
-  }
-  
-  return count;
-#endif /* not MB_CAPABLE */
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/mbstowcs_r.c b/newlib/libc/stdlib/mbstowcs_r.c
deleted file mode 100644
index c6130b2bd..000000000
--- a/newlib/libc/stdlib/mbstowcs_r.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <stdlib.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (_mbstowcs_r, (reent, pwcs, s, n, state),
-        struct _reent *r    _AND         
-        wchar_t       *pwcs _AND
-        const char    *s    _AND
-        size_t         n    _AND
-        mbstate_t     *state)
-{
-  wchar_t *ptr = pwcs;
-  size_t max = n;
-  char *t = (char *)s;
-  int bytes;
-
-  while (n > 0)
-    {
-      bytes = _mbtowc_r (r, ptr, t, MB_CUR_MAX, state);
-      if (bytes < 0)
-	{
-	  state->__count = 0;
-	  return -1;
-	}
-      else if (bytes == 0)
-        return ptr - pwcs;
-      t += bytes;
-      ++ptr;
-      --n;
-    }
-
-  return max;
-}   
diff --git a/newlib/libc/stdlib/mbtowc.c b/newlib/libc/stdlib/mbtowc.c
deleted file mode 100644
index e1e725dbf..000000000
--- a/newlib/libc/stdlib/mbtowc.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-FUNCTION
-<<mbtowc>>---minimal multibyte to wide char converter
-
-INDEX
-	mbtowc
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int mbtowc(wchar_t *<[pwc]>, const char *<[s]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int mbtowc(<[pwc]>, <[s]>, <[n]>)
-	wchar_t *<[pwc]>;
-	const char *<[s]>;
-	size_t <[n]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<mbtowc>>.  In this case,
-only ``multi-byte character sequences'' recognized are single bytes,
-and they are ``converted'' to themselves.
-Each call to <<mbtowc>> copies one character from <<*<[s]>>> to
-<<*<[pwc]>>>, unless <[s]> is a null pointer.  The argument n
-is ignored.
-
-When MB_CAPABLE is defined, this routine calls <<_mbtowc_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-RETURNS
-This implementation of <<mbtowc>> returns <<0>> if
-<[s]> is <<NULL>> or is the empty string; 
-it returns <<1>> if not MB_CAPABLE or
-the character is a single-byte character; it returns <<-1>>
-if n is <<0>> or the multi-byte character is invalid; 
-otherwise it returns the number of bytes in the multibyte character.
-If the return value is -1, no changes are made to the <<pwc>>
-output string.  If the input is the empty string, a wchar_t nul
-is placed in the output string and 0 is returned.  If the input
-has a length of 0, no changes are made to the <<pwc>> output string.
-
-PORTABILITY
-<<mbtowc>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<mbtowc>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <wchar.h>
-
-int
-_DEFUN (mbtowc, (pwc, s, n),
-        wchar_t *pwc _AND
-        const char *s _AND
-        size_t n)
-{
-#ifdef MB_CAPABLE
-  int retval = 0;
-  mbstate_t *ps;
-
-  _REENT_CHECK_MISC(_REENT);
-  ps = &(_REENT_MBTOWC_STATE(_REENT));
-  
-  retval = _mbtowc_r (_REENT, pwc, s, n, ps);
-  
-  if (retval < 0)
-    {
-      ps->__count = 0;
-      return -1;
-    }
-  return retval;
-#else /* not MB_CAPABLE */
-  if (s == NULL)
-    return 0;
-  if (n == 0)
-    return -1;
-  if (pwc)
-    *pwc = (wchar_t) *s;
-  return (*s != '\0');
-#endif /* not MB_CAPABLE */
-}
-
-#endif /* !_REENT_ONLY */
-
-
-
-
diff --git a/newlib/libc/stdlib/mbtowc_r.c b/newlib/libc/stdlib/mbtowc_r.c
deleted file mode 100644
index c7c7effca..000000000
--- a/newlib/libc/stdlib/mbtowc_r.c
+++ /dev/null
@@ -1,470 +0,0 @@
-#include <stdlib.h>
-#include <locale.h>
-#include "mbctype.h"
-#include <wchar.h>
-#include <string.h>
-
-#ifdef MB_CAPABLE
-typedef enum { ESCAPE, DOLLAR, BRACKET, AT, B, J, 
-               NUL, JIS_CHAR, OTHER, JIS_C_NUM } JIS_CHAR_TYPE;
-typedef enum { ASCII, JIS, A_ESC, A_ESC_DL, JIS_1, J_ESC, J_ESC_BR,
-               INV, JIS_S_NUM } JIS_STATE; 
-typedef enum { COPY_A, COPY_J1, COPY_J2, MAKE_A, NOOP, EMPTY, ERROR } JIS_ACTION;
-
-/************************************************************************************** 
- * state/action tables for processing JIS encoding
- * Where possible, switches to JIS are grouped with proceding JIS characters and switches
- * to ASCII are grouped with preceding JIS characters.  Thus, maximum returned length
- * is 2 (switch to JIS) + 2 (JIS characters) + 2 (switch back to ASCII) = 6.
- *************************************************************************************/
-
-static JIS_STATE JIS_state_table[JIS_S_NUM][JIS_C_NUM] = {
-/*              ESCAPE   DOLLAR    BRACKET   AT       B       J        NUL      JIS_CHAR  OTHER */
-/* ASCII */   { A_ESC,   ASCII,    ASCII,    ASCII,   ASCII,  ASCII,   ASCII,   ASCII,    ASCII },
-/* JIS */     { J_ESC,   JIS_1,    JIS_1,    JIS_1,   JIS_1,  JIS_1,   INV,     JIS_1,    INV },
-/* A_ESC */   { ASCII,   A_ESC_DL, ASCII,    ASCII,   ASCII,  ASCII,   ASCII,   ASCII,    ASCII },
-/* A_ESC_DL */{ ASCII,   ASCII,    ASCII,    JIS,     JIS,    ASCII,   ASCII,   ASCII,    ASCII }, 
-/* JIS_1 */   { INV,     JIS,      JIS,      JIS,     JIS,    JIS,     INV,     JIS,      INV },
-/* J_ESC */   { INV,     INV,      J_ESC_BR, INV,     INV,    INV,     INV,     INV,      INV },
-/* J_ESC_BR */{ INV,     INV,      INV,      INV,     ASCII,  ASCII,   INV,     INV,      INV },
-};
-
-static JIS_ACTION JIS_action_table[JIS_S_NUM][JIS_C_NUM] = {
-/*              ESCAPE   DOLLAR    BRACKET   AT       B        J        NUL      JIS_CHAR  OTHER */
-/* ASCII */   { NOOP,    COPY_A,   COPY_A,   COPY_A,  COPY_A,  COPY_A,  EMPTY,   COPY_A,  COPY_A},
-/* JIS */     { NOOP,    COPY_J1,  COPY_J1,  COPY_J1, COPY_J1, COPY_J1, ERROR,   COPY_J1, ERROR },
-/* A_ESC */   { COPY_A,  NOOP,     COPY_A,   COPY_A,  COPY_A,  COPY_A,  COPY_A,  COPY_A,  COPY_A},
-/* A_ESC_DL */{ COPY_A,  COPY_A,   COPY_A,   NOOP,    NOOP,    COPY_A,  COPY_A,  COPY_A,  COPY_A},
-/* JIS_1 */   { ERROR,   COPY_J2,  COPY_J2,  COPY_J2, COPY_J2, COPY_J2, ERROR,   COPY_J2, ERROR },
-/* J_ESC */   { ERROR,   ERROR,    NOOP,     ERROR,   ERROR,   ERROR,   ERROR,   ERROR,   ERROR },
-/* J_ESC_BR */{ ERROR,   ERROR,    ERROR,    ERROR,   MAKE_A,  MAKE_A,  ERROR,   ERROR,   ERROR },
-};
-#endif /* MB_CAPABLE */
-
-/* we override the mbstate_t __count field for more complex encodings and use it store a state value */
-#define __state __count
-
-extern char __lc_ctype[12];
-
-int
-_DEFUN (_mbtowc_r, (r, pwc, s, n, state),
-        struct _reent *r   _AND
-        wchar_t       *pwc _AND 
-        const char    *s   _AND        
-        size_t         n   _AND
-        mbstate_t      *state)
-{
-  wchar_t dummy;
-  unsigned char *t = (unsigned char *)s;
-
-  if (pwc == NULL)
-    pwc = &dummy;
-
-  if (s != NULL && n == 0)
-    return -2;
-
-#ifdef MB_CAPABLE
-  if (__lc_ctype == NULL ||
-      (strlen (__lc_ctype) <= 1))
-    { /* fall-through */ }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      int ch;
-      int i = 0;
-
-      if (s == NULL)
-        return 0; /* UTF-8 character encodings are not state-dependent */
-
-      if (state->__count == 0)
-	ch = t[i++];
-      else
-	{
-	  ++n;
-	  ch = state->__value.__wchb[0];
-	}
-
-      if (ch == '\0')
-	{
-	  *pwc = 0;
-	  state->__count = 0;
-	  return 0; /* s points to the null character */
-	}
-
-      if (ch >= 0x0 && ch <= 0x7f)
-	{
-	  /* single-byte sequence */
-	  state->__count = 0;
-	  *pwc = ch;
-	  return 1;
-	}
-      else if (ch >= 0xc0 && ch <= 0xdf)
-	{
-	  /* two-byte sequence */
-	  state->__value.__wchb[0] = ch;
-	  state->__count = 1;
-	  if (n < 2)
-	    return -2;
-	  ch = t[i++];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  if (state->__value.__wchb[0] < 0xc2)
-	    /* overlong UTF-8 sequence */
-	    return -1;
-	  state->__count = 0;
-	  *pwc = (wchar_t)((state->__value.__wchb[0] & 0x1f) << 6)
-	    |    (wchar_t)(ch & 0x3f);
-	  return i;
-	}
-      else if (ch >= 0xe0 && ch <= 0xef)
-	{
-	  /* three-byte sequence */
-	  wchar_t tmp;
-	  state->__value.__wchb[0] = ch;
-	  if (state->__count == 0)
-	    state->__count = 1;
-	  else
-	    ++n;
-	  if (n < 2)
-	    return -2;
-	  ch = (state->__count == 1) ? t[i++] : state->__value.__wchb[1];
-	  if (state->__value.__wchb[0] == 0xe0 && ch < 0xa0)
-	    /* overlong UTF-8 sequence */
-	    return -1;
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[1] = ch;
-	  state->__count = 2;
-	  if (n < 3)
-	    return -2;
-	  ch = t[i++];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__count = 0;
-	  tmp = (wchar_t)((state->__value.__wchb[0] & 0x0f) << 12)
-	    |    (wchar_t)((state->__value.__wchb[1] & 0x3f) << 6)
-	    |     (wchar_t)(ch & 0x3f);
-	
-	  if (tmp >= 0xd800 && tmp <= 0xdfff)
-	    return -1;
-	  *pwc = tmp;
-	  return i;
-	}
-      else if (ch >= 0xf0 && ch <= 0xf7)
-	{
-	  /* four-byte sequence */
-	  if (sizeof(wchar_t) < 4)
-	    return -1; /* we can't store such a value */
-	  state->__value.__wchb[0] = ch;
-	  if (state->__count == 0)
-	    state->__count = 1;
-	  else
-	    ++n;
-	  if (n < 2)
-	    return -2;
-	  ch = (state->__count == 1) ? t[i++] : state->__value.__wchb[1];
-	  if (state->__value.__wchb[0] == 0xf0 && ch < 0x90)
-	    /* overlong UTF-8 sequence */
-	    return -1;
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[1] = ch;
-	  if (state->__count == 1)
-	    state->__count = 2;
-	  else
-	    ++n;
-	  if (n < 3)
-	    return -2;
-	  ch = (state->__count == 2) ? t[i++] : state->__value.__wchb[2];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[2] = ch;
-	  state->__count = 3;
-	  if (n < 4)
-	    return -2;
-	  ch = t[i++];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  *pwc = (wchar_t)((state->__value.__wchb[0] & 0x07) << 18)
-	    |    (wchar_t)((state->__value.__wchb[1] & 0x3f) << 12)
-	    |    (wchar_t)((state->__value.__wchb[2] & 0x3f) << 6)
-	    |    (wchar_t)(ch & 0x3f);
-	
-	  state->__count = 0;
-	  return i;
-	}
-      else if (ch >= 0xf8 && ch <= 0xfb)
-	{
-	  /* five-byte sequence */
-	  if (sizeof(wchar_t) < 4)
-	    return -1; /* we can't store such a value */
-	  state->__value.__wchb[0] = ch;
-	  if (state->__count == 0)
-	    state->__count = 1;
-	  else
-	    ++n;
-	  if (n < 2)
-	    return -2;
-	  ch = (state->__count == 1) ? t[i++] : state->__value.__wchb[1];
-	  if (state->__value.__wchb[0] == 0xf8 && ch < 0x88)
-	    /* overlong UTF-8 sequence */
-	    return -1;
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[1] = ch;
-	  if (state->__count == 1)
-	    state->__count = 2;
-	  else
-	    ++n;
-	  if (n < 3)
-	    return -2;
-	  ch = (state->__count == 2) ? t[i++] : state->__value.__wchb[2];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[2] = ch;
-	  if (state->__count == 2)
-	    state->__count = 3;
-	  else
-	    ++n;
-	  if (n < 4)
-	    return -2;
-	  ch = (state->__count == 3) ? t[i++] : state->__value.__wchb[3];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[3] = ch;
-	  state->__count = 4;
-	  if (n < 5)
-	    return -2;
-	  ch = t[i++];
-	  *pwc = (wchar_t)((state->__value.__wchb[0] & 0x03) << 24)
-	    |    (wchar_t)((state->__value.__wchb[1] & 0x3f) << 18)
-	    |    (wchar_t)((state->__value.__wchb[2] & 0x3f) << 12)
-	    |    (wchar_t)((state->__value.__wchb[3] & 0x3f) << 6)
-	    |    (wchar_t)(ch & 0x3f);
-	
-	  state->__count = 0;
-	  return i;
-	}
-      else if (ch >= 0xfc && ch <= 0xfd)
-        {
-          /* six-byte sequence */
-	  int ch2;
-	  if (sizeof(wchar_t) < 4)
-	    return -1; /* we can't store such a value */
-	  state->__value.__wchb[0] = ch;
-	  if (state->__count == 0)
-	    state->__count = 1;
-	  else
-	    ++n;
-	  if (n < 2)
-	    return -2;
-	  ch = (state->__count == 1) ? t[i++] : state->__value.__wchb[1];
-	  if (state->__value.__wchb[0] == 0xfc && ch < 0x84)
-	    /* overlong UTF-8 sequence */
-	    return -1;
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[1] = ch;
-	  if (state->__count == 1)
-	    state->__count = 2;
-	  else
-	    ++n;
-	  if (n < 3)
-	    return -2;
-	  ch = (state->__count == 2) ? t[i++] : state->__value.__wchb[2];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[2] = ch;
-	  if (state->__count == 2)
-	    state->__count = 3;
-	  else
-	    ++n;
-	  if (n < 4)
-	    return -2;
-	  ch = (state->__count == 3) ? t[i++] : state->__value.__wchb[3];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  state->__value.__wchb[3] = ch;
-	  if (state->__count == 3)
-	    state->__count = 4;
-	  else
-	    ++n;
-	  if (n < 5)
-	    return -2;
-	  if (n == 5)
-	    return -1; /* at this point we can't save enough to restart */
-	  ch = t[i++];
-	  if (ch < 0x80 || ch > 0xbf)
-	    return -1;
-	  ch2 = t[i++];
-	  *pwc = (wchar_t)((state->__value.__wchb[0] & 0x01) << 30)
-	    |    (wchar_t)((state->__value.__wchb[1] & 0x3f) << 24)
-	    |    (wchar_t)((state->__value.__wchb[2] & 0x3f) << 18)
-	    |    (wchar_t)((state->__value.__wchb[3] & 0x3f) << 12)
-	    |    (wchar_t)((ch & 0x3f) << 6)
-	    |    (wchar_t)(ch2 & 0x3f);
-	
-	  state->__count = 0;
-	  return i;
-	}
-      else
-	return -1;
-    }      
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      int ch;
-      int i = 0;
-      if (s == NULL)
-        return 0;  /* not state-dependent */
-      ch = t[i++];
-      if (state->__count == 0)
-	{
-	  if (_issjis1 (ch))
-	    {
-	      state->__value.__wchb[0] = ch;
-	      state->__count = 1;
-	      if (n <= 1)
-		return -2;
-	      ch = t[i++];
-	    }
-	}
-      if (state->__count == 1)
-	{
-	  if (_issjis2 (ch))
-	    {
-	      *pwc = (((wchar_t)state->__value.__wchb[0]) << 8) + (wchar_t)ch;
-	      state->__count = 0;
-	      return i;
-	    }
-	  else  
-	    return -1;
-	}
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      int ch;
-      int i = 0;
-      if (s == NULL)
-        return 0;  /* not state-dependent */
-      ch = t[i++];
-      if (state->__count == 0)
-	{
-	  if (_iseucjp (ch))
-	    {
-	      state->__value.__wchb[0] = ch;
-	      state->__count = 1;
-	      if (n <= 1)
-		return -2;
-	      ch = t[i++];
-	    }
-	}
-      if (state->__count == 1)
-	{
-	  if (_iseucjp (ch))
-	    {
-	      *pwc = (((wchar_t)state->__value.__wchb[0]) << 8) + (wchar_t)ch;
-	      state->__count = 0;
-	      return i;
-	    }
-	  else
-	    return -1;
-	}
-    }
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      JIS_STATE curr_state;
-      JIS_ACTION action;
-      JIS_CHAR_TYPE ch;
-      unsigned char *ptr;
-      unsigned int i;
-      int curr_ch;
- 
-      if (s == NULL)
-        {
-          state->__state = ASCII;
-          return 1;  /* state-dependent */
-        }
-
-      curr_state = state->__state;
-      ptr = t;
-
-      for (i = 0; i < n; ++i)
-        {
-          curr_ch = t[i];
-          switch (curr_ch)
-            {
-	    case ESC_CHAR:
-              ch = ESCAPE;
-              break;
-	    case '$':
-              ch = DOLLAR;
-              break;
-            case '@':
-              ch = AT;
-              break;
-            case '(':
-	      ch = BRACKET;
-              break;
-            case 'B':
-              ch = B;
-              break;
-            case 'J':
-              ch = J;
-              break;
-            case '\0':
-              ch = NUL;
-              break;
-            default:
-              if (_isjis (curr_ch))
-                ch = JIS_CHAR;
-              else
-                ch = OTHER;
-	    }
-
-          action = JIS_action_table[curr_state][ch];
-          curr_state = JIS_state_table[curr_state][ch];
-        
-          switch (action)
-            {
-            case NOOP:
-              break;
-            case EMPTY:
-              state->__state = ASCII;
-              *pwc = (wchar_t)0;
-              return 0;
-            case COPY_A:
-	      state->__state = ASCII;
-              *pwc = (wchar_t)*ptr;
-              return (i + 1);
-            case COPY_J1:
-              state->__value.__wchb[0] = t[i];
-	      break;
-            case COPY_J2:
-              state->__state = JIS;
-              *pwc = (((wchar_t)state->__value.__wchb[0]) << 8) + (wchar_t)(t[i]);
-              return (i + 1);
-            case MAKE_A:
-              ptr = (char *)(t + i + 1);
-              break;
-            case ERROR:
-            default:
-              return -1;
-            }
-
-        }
-
-      state->__state = curr_state;
-      return -2;  /* n < bytes needed */
-    }
-#endif /* MB_CAPABLE */               
-
-  /* otherwise this must be the "C" locale or unknown locale */
-  if (s == NULL)
-    return 0;  /* not state-dependent */
-
-  *pwc = (wchar_t)*t;
-  
-  if (*t == '\0')
-    return 0;
-
-  return 1;
-}
diff --git a/newlib/libc/stdlib/mlock.c b/newlib/libc/stdlib/mlock.c
deleted file mode 100644
index c603fbcda..000000000
--- a/newlib/libc/stdlib/mlock.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef MALLOC_PROVIDED
-/*
-FUNCTION
-<<__malloc_lock>>, <<__malloc_unlock>>--lock malloc pool
-
-INDEX
-	__malloc_lock
-INDEX
-	__malloc_unlock
-
-ANSI_SYNOPSIS
-	#include <malloc.h>
-	void __malloc_lock (struct _reent *<[reent]>);
-	void __malloc_unlock (struct _reent *<[reent]>);
-
-TRAD_SYNOPSIS
-	void __malloc_lock(<[reent]>)
-	struct _reent *<[reent]>;
-
-	void __malloc_unlock(<[reent]>)
-	struct _reent *<[reent]>;
-
-DESCRIPTION
-The <<malloc>> family of routines call these functions when they need
-to lock the memory pool.  The version of these routines supplied in
-the library does not do anything.  If multiple threads of execution
-can call <<malloc>>, or if <<malloc>> can be called reentrantly, then
-you need to define your own versions of these functions in order to
-safely lock the memory pool during a call.  If you do not, the memory
-pool may become corrupted.
-
-A call to <<malloc>> may call <<__malloc_lock>> recursively; that is,
-the sequence of calls may go <<__malloc_lock>>, <<__malloc_lock>>,
-<<__malloc_unlock>>, <<__malloc_unlock>>.  Any implementation of these
-routines must be careful to avoid causing a thread to wait for a lock
-that it already holds.
-*/
-
-#include <malloc.h>
-
-void
-__malloc_lock (ptr)
-     struct _reent *ptr;
-{
-}
-
-void
-__malloc_unlock (ptr)
-     struct _reent *ptr;
-{
-}
-#endif
diff --git a/newlib/libc/stdlib/mprec.c b/newlib/libc/stdlib/mprec.c
deleted file mode 100644
index 0ef28c745..000000000
--- a/newlib/libc/stdlib/mprec.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/****************************************************************
- *
- * The author of this software is David M. Gay.
- *
- * Copyright (c) 1991 by AT&T.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- ***************************************************************/
-
-/* Please send bug reports to
-	David M. Gay
-	AT&T Bell Laboratories, Room 2C-463
-	600 Mountain Avenue
-	Murray Hill, NJ 07974-2070
-	U.S.A.
-	dmg@research.att.com or research!dmg
- */
-
-/* strtod for IEEE-, VAX-, and IBM-arithmetic machines.
- *
- * This strtod returns a nearest machine number to the input decimal
- * string (or sets errno to ERANGE).  With IEEE arithmetic, ties are
- * broken by the IEEE round-even rule.  Otherwise ties are broken by
- * biased rounding (add half and chop).
- *
- * Inspired loosely by William D. Clinger's paper "How to Read Floating
- * Point Numbers Accurately" [Proc. ACM SIGPLAN '90, pp. 92-101].
- *
- * Modifications:
- *
- *	1. We only require IEEE, IBM, or VAX double-precision
- *		arithmetic (not IEEE double-extended).
- *	2. We get by with floating-point arithmetic in a case that
- *		Clinger missed -- when we're computing d * 10^n
- *		for a small integer d and the integer n is not too
- *		much larger than 22 (the maximum integer k for which
- *		we can represent 10^k exactly), we may be able to
- *		compute (d*10^k) * 10^(e-k) with just one roundoff.
- *	3. Rather than a bit-at-a-time adjustment of the binary
- *		result in the hard case, we use floating-point
- *		arithmetic to determine the adjustment to within
- *		one bit; only in really hard cases do we need to
- *		compute a second residual.
- *	4. Because of 3., we don't need a large table of powers of 10
- *		for ten-to-e (just some small tables, e.g. of 10^k
- *		for 0 <= k <= 22).
- */
-
-/*
- * #define IEEE_8087 for IEEE-arithmetic machines where the least
- *	significant byte has the lowest address.
- * #define IEEE_MC68k for IEEE-arithmetic machines where the most
- *	significant byte has the lowest address.
- * #define Sudden_Underflow for IEEE-format machines without gradual
- *	underflow (i.e., that flush to zero on underflow).
- * #define IBM for IBM mainframe-style floating-point arithmetic.
- * #define VAX for VAX-style floating-point arithmetic.
- * #define Unsigned_Shifts if >> does treats its left operand as unsigned.
- * #define No_leftright to omit left-right logic in fast floating-point
- *	computation of dtoa.
- * #define Check_FLT_ROUNDS if FLT_ROUNDS can assume the values 2 or 3.
- * #define RND_PRODQUOT to use rnd_prod and rnd_quot (assembly routines
- *	that use extended-precision instructions to compute rounded
- *	products and quotients) with IBM.
- * #define ROUND_BIASED for IEEE-format with biased rounding.
- * #define Inaccurate_Divide for IEEE-format with correctly rounded
- *	products but inaccurate quotients, e.g., for Intel i860.
- * #define Just_16 to store 16 bits per 32-bit long when doing high-precision
- *	integer arithmetic.  Whether this speeds things up or slows things
- *	down depends on the machine and the number being converted.
- */
-
-#include <_ansi.h>
-#include <stdlib.h>
-#include <string.h>
-#include <reent.h>
-#include "mprec.h"
-
-/* reent.c knows this value */
-#define _Kmax 15
-
-_Bigint *
-_DEFUN (Balloc, (ptr, k), struct _reent *ptr _AND int k)
-{
-  int x;
-  _Bigint *rv ;
-
-  _REENT_CHECK_MP(ptr);
-  if (_REENT_MP_FREELIST(ptr) == NULL)
-    {
-      /* Allocate a list of pointers to the mprec objects */
-      _REENT_MP_FREELIST(ptr) = (struct _Bigint **) _calloc_r (ptr, 
-						      sizeof (struct _Bigint *),
-						      _Kmax + 1);
-      if (_REENT_MP_FREELIST(ptr) == NULL)
-	{
-	  return NULL;
-	}
-    }
-
-  if ((rv = _REENT_MP_FREELIST(ptr)[k]) != 0)
-    {
-      _REENT_MP_FREELIST(ptr)[k] = rv->_next;
-    }
-  else
-    {
-      x = 1 << k;
-      /* Allocate an mprec Bigint and stick in in the freelist */
-      rv = (_Bigint *) _calloc_r (ptr,
-				  1,
-				  sizeof (_Bigint) +
-				  (x-1) * sizeof(rv->_x));
-      if (rv == NULL) return NULL;
-      rv->_k = k;
-      rv->_maxwds = x;
-    }
-  rv->_sign = rv->_wds = 0;
-  return rv;
-}
-
-void
-_DEFUN (Bfree, (ptr, v), struct _reent *ptr _AND _Bigint * v)
-{
-  _REENT_CHECK_MP(ptr);
-  if (v)
-    {
-      v->_next = _REENT_MP_FREELIST(ptr)[v->_k];
-      _REENT_MP_FREELIST(ptr)[v->_k] = v;
-    }
-}
-
-_Bigint *
-_DEFUN (multadd, (ptr, b, m, a),
-	struct _reent *ptr _AND
-	_Bigint * b _AND
-	int m _AND
-	int a)
-{
-  int i, wds;
-  __ULong *x, y;
-#ifdef Pack_32
-  __ULong xi, z;
-#endif
-  _Bigint *b1;
-
-  wds = b->_wds;
-  x = b->_x;
-  i = 0;
-  do
-    {
-#ifdef Pack_32
-      xi = *x;
-      y = (xi & 0xffff) * m + a;
-      z = (xi >> 16) * m + (y >> 16);
-      a = (int) (z >> 16);
-      *x++ = (z << 16) + (y & 0xffff);
-#else
-      y = *x * m + a;
-      a = (int) (y >> 16);
-      *x++ = y & 0xffff;
-#endif
-    }
-  while (++i < wds);
-  if (a)
-    {
-      if (wds >= b->_maxwds)
-	{
-	  b1 = Balloc (ptr, b->_k + 1);
-	  Bcopy (b1, b);
-	  Bfree (ptr, b);
-	  b = b1;
-	}
-      b->_x[wds++] = a;
-      b->_wds = wds;
-    }
-  return b;
-}
-
-_Bigint *
-_DEFUN (s2b, (ptr, s, nd0, nd, y9),
-	struct _reent * ptr _AND
-	_CONST char *s _AND
-	int nd0 _AND
-	int nd _AND
-	__ULong y9)
-{
-  _Bigint *b;
-  int i, k;
-  __Long x, y;
-
-  x = (nd + 8) / 9;
-  for (k = 0, y = 1; x > y; y <<= 1, k++);
-#ifdef Pack_32
-  b = Balloc (ptr, k);
-  b->_x[0] = y9;
-  b->_wds = 1;
-#else
-  b = Balloc (ptr, k + 1);
-  b->_x[0] = y9 & 0xffff;
-  b->_wds = (b->_x[1] = y9 >> 16) ? 2 : 1;
-#endif
-
-  i = 9;
-  if (9 < nd0)
-    {
-      s += 9;
-      do
-	b = multadd (ptr, b, 10, *s++ - '0');
-      while (++i < nd0);
-      s++;
-    }
-  else
-    s += 10;
-  for (; i < nd; i++)
-    b = multadd (ptr, b, 10, *s++ - '0');
-  return b;
-}
-
-int
-_DEFUN (hi0bits,
-	(x), register __ULong x)
-{
-  register int k = 0;
-
-  if (!(x & 0xffff0000))
-    {
-      k = 16;
-      x <<= 16;
-    }
-  if (!(x & 0xff000000))
-    {
-      k += 8;
-      x <<= 8;
-    }
-  if (!(x & 0xf0000000))
-    {
-      k += 4;
-      x <<= 4;
-    }
-  if (!(x & 0xc0000000))
-    {
-      k += 2;
-      x <<= 2;
-    }
-  if (!(x & 0x80000000))
-    {
-      k++;
-      if (!(x & 0x40000000))
-	return 32;
-    }
-  return k;
-}
-
-int
-_DEFUN (lo0bits, (y), __ULong *y)
-{
-  register int k;
-  register __ULong x = *y;
-
-  if (x & 7)
-    {
-      if (x & 1)
-	return 0;
-      if (x & 2)
-	{
-	  *y = x >> 1;
-	  return 1;
-	}
-      *y = x >> 2;
-      return 2;
-    }
-  k = 0;
-  if (!(x & 0xffff))
-    {
-      k = 16;
-      x >>= 16;
-    }
-  if (!(x & 0xff))
-    {
-      k += 8;
-      x >>= 8;
-    }
-  if (!(x & 0xf))
-    {
-      k += 4;
-      x >>= 4;
-    }
-  if (!(x & 0x3))
-    {
-      k += 2;
-      x >>= 2;
-    }
-  if (!(x & 1))
-    {
-      k++;
-      x >>= 1;
-      if (!x & 1)
-	return 32;
-    }
-  *y = x;
-  return k;
-}
-
-_Bigint *
-_DEFUN (i2b, (ptr, i), struct _reent * ptr _AND int i)
-{
-  _Bigint *b;
-
-  b = Balloc (ptr, 1);
-  b->_x[0] = i;
-  b->_wds = 1;
-  return b;
-}
-
-_Bigint *
-_DEFUN (mult, (ptr, a, b), struct _reent * ptr _AND _Bigint * a _AND _Bigint * b)
-{
-  _Bigint *c;
-  int k, wa, wb, wc;
-  __ULong carry, y, z;
-  __ULong *x, *xa, *xae, *xb, *xbe, *xc, *xc0;
-#ifdef Pack_32
-  __ULong z2;
-#endif
-
-  if (a->_wds < b->_wds)
-    {
-      c = a;
-      a = b;
-      b = c;
-    }
-  k = a->_k;
-  wa = a->_wds;
-  wb = b->_wds;
-  wc = wa + wb;
-  if (wc > a->_maxwds)
-    k++;
-  c = Balloc (ptr, k);
-  for (x = c->_x, xa = x + wc; x < xa; x++)
-    *x = 0;
-  xa = a->_x;
-  xae = xa + wa;
-  xb = b->_x;
-  xbe = xb + wb;
-  xc0 = c->_x;
-#ifdef Pack_32
-  for (; xb < xbe; xb++, xc0++)
-    {
-      if ((y = *xb & 0xffff) != 0)
-	{
-	  x = xa;
-	  xc = xc0;
-	  carry = 0;
-	  do
-	    {
-	      z = (*x & 0xffff) * y + (*xc & 0xffff) + carry;
-	      carry = z >> 16;
-	      z2 = (*x++ >> 16) * y + (*xc >> 16) + carry;
-	      carry = z2 >> 16;
-	      Storeinc (xc, z2, z);
-	    }
-	  while (x < xae);
-	  *xc = carry;
-	}
-      if ((y = *xb >> 16) != 0)
-	{
-	  x = xa;
-	  xc = xc0;
-	  carry = 0;
-	  z2 = *xc;
-	  do
-	    {
-	      z = (*x & 0xffff) * y + (*xc >> 16) + carry;
-	      carry = z >> 16;
-	      Storeinc (xc, z, z2);
-	      z2 = (*x++ >> 16) * y + (*xc & 0xffff) + carry;
-	      carry = z2 >> 16;
-	    }
-	  while (x < xae);
-	  *xc = z2;
-	}
-    }
-#else
-  for (; xb < xbe; xc0++)
-    {
-      if (y = *xb++)
-	{
-	  x = xa;
-	  xc = xc0;
-	  carry = 0;
-	  do
-	    {
-	      z = *x++ * y + *xc + carry;
-	      carry = z >> 16;
-	      *xc++ = z & 0xffff;
-	    }
-	  while (x < xae);
-	  *xc = carry;
-	}
-    }
-#endif
-  for (xc0 = c->_x, xc = xc0 + wc; wc > 0 && !*--xc; --wc);
-  c->_wds = wc;
-  return c;
-}
-
-_Bigint *
-_DEFUN (pow5mult,
-	(ptr, b, k), struct _reent * ptr _AND _Bigint * b _AND int k)
-{
-  _Bigint *b1, *p5, *p51;
-  int i;
-  static _CONST int p05[3] = {5, 25, 125};
-
-  if ((i = k & 3) != 0)
-    b = multadd (ptr, b, p05[i - 1], 0);
-
-  if (!(k >>= 2))
-    return b;
-  _REENT_CHECK_MP(ptr);
-  if (!(p5 = _REENT_MP_P5S(ptr)))
-    {
-      /* first time */
-      p5 = _REENT_MP_P5S(ptr) = i2b (ptr, 625);
-      p5->_next = 0;
-    }
-  for (;;)
-    {
-      if (k & 1)
-	{
-	  b1 = mult (ptr, b, p5);
-	  Bfree (ptr, b);
-	  b = b1;
-	}
-      if (!(k >>= 1))
-	break;
-      if (!(p51 = p5->_next))
-	{
-	  p51 = p5->_next = mult (ptr, p5, p5);
-	  p51->_next = 0;
-	}
-      p5 = p51;
-    }
-  return b;
-}
-
-_Bigint *
-_DEFUN (lshift, (ptr, b, k), struct _reent * ptr _AND _Bigint * b _AND int k)
-{
-  int i, k1, n, n1;
-  _Bigint *b1;
-  __ULong *x, *x1, *xe, z;
-
-#ifdef Pack_32
-  n = k >> 5;
-#else
-  n = k >> 4;
-#endif
-  k1 = b->_k;
-  n1 = n + b->_wds + 1;
-  for (i = b->_maxwds; n1 > i; i <<= 1)
-    k1++;
-  b1 = Balloc (ptr, k1);
-  x1 = b1->_x;
-  for (i = 0; i < n; i++)
-    *x1++ = 0;
-  x = b->_x;
-  xe = x + b->_wds;
-#ifdef Pack_32
-  if (k &= 0x1f)
-    {
-      k1 = 32 - k;
-      z = 0;
-      do
-	{
-	  *x1++ = *x << k | z;
-	  z = *x++ >> k1;
-	}
-      while (x < xe);
-      if ((*x1 = z) != 0)
-	++n1;
-    }
-#else
-  if (k &= 0xf)
-    {
-      k1 = 16 - k;
-      z = 0;
-      do
-	{
-	  *x1++ = *x << k & 0xffff | z;
-	  z = *x++ >> k1;
-	}
-      while (x < xe);
-      if (*x1 = z)
-	++n1;
-    }
-#endif
-  else
-    do
-      *x1++ = *x++;
-    while (x < xe);
-  b1->_wds = n1 - 1;
-  Bfree (ptr, b);
-  return b1;
-}
-
-int
-_DEFUN (cmp, (a, b), _Bigint * a _AND _Bigint * b)
-{
-  __ULong *xa, *xa0, *xb, *xb0;
-  int i, j;
-
-  i = a->_wds;
-  j = b->_wds;
-#ifdef DEBUG
-  if (i > 1 && !a->_x[i - 1])
-    Bug ("cmp called with a->_x[a->_wds-1] == 0");
-  if (j > 1 && !b->_x[j - 1])
-    Bug ("cmp called with b->_x[b->_wds-1] == 0");
-#endif
-  if (i -= j)
-    return i;
-  xa0 = a->_x;
-  xa = xa0 + j;
-  xb0 = b->_x;
-  xb = xb0 + j;
-  for (;;)
-    {
-      if (*--xa != *--xb)
-	return *xa < *xb ? -1 : 1;
-      if (xa <= xa0)
-	break;
-    }
-  return 0;
-}
-
-_Bigint *
-_DEFUN (diff, (ptr, a, b), struct _reent * ptr _AND
-	_Bigint * a _AND _Bigint * b)
-{
-  _Bigint *c;
-  int i, wa, wb;
-  __Long borrow, y;		/* We need signed shifts here. */
-  __ULong *xa, *xae, *xb, *xbe, *xc;
-#ifdef Pack_32
-  __Long z;
-#endif
-
-  i = cmp (a, b);
-  if (!i)
-    {
-      c = Balloc (ptr, 0);
-      c->_wds = 1;
-      c->_x[0] = 0;
-      return c;
-    }
-  if (i < 0)
-    {
-      c = a;
-      a = b;
-      b = c;
-      i = 1;
-    }
-  else
-    i = 0;
-  c = Balloc (ptr, a->_k);
-  c->_sign = i;
-  wa = a->_wds;
-  xa = a->_x;
-  xae = xa + wa;
-  wb = b->_wds;
-  xb = b->_x;
-  xbe = xb + wb;
-  xc = c->_x;
-  borrow = 0;
-#ifdef Pack_32
-  do
-    {
-      y = (*xa & 0xffff) - (*xb & 0xffff) + borrow;
-      borrow = y >> 16;
-      Sign_Extend (borrow, y);
-      z = (*xa++ >> 16) - (*xb++ >> 16) + borrow;
-      borrow = z >> 16;
-      Sign_Extend (borrow, z);
-      Storeinc (xc, z, y);
-    }
-  while (xb < xbe);
-  while (xa < xae)
-    {
-      y = (*xa & 0xffff) + borrow;
-      borrow = y >> 16;
-      Sign_Extend (borrow, y);
-      z = (*xa++ >> 16) + borrow;
-      borrow = z >> 16;
-      Sign_Extend (borrow, z);
-      Storeinc (xc, z, y);
-    }
-#else
-  do
-    {
-      y = *xa++ - *xb++ + borrow;
-      borrow = y >> 16;
-      Sign_Extend (borrow, y);
-      *xc++ = y & 0xffff;
-    }
-  while (xb < xbe);
-  while (xa < xae)
-    {
-      y = *xa++ + borrow;
-      borrow = y >> 16;
-      Sign_Extend (borrow, y);
-      *xc++ = y & 0xffff;
-    }
-#endif
-  while (!*--xc)
-    wa--;
-  c->_wds = wa;
-  return c;
-}
-
-double
-_DEFUN (ulp, (_x), double _x)
-{
-  union double_union x, a;
-  register __Long L;
-
-  x.d = _x;
-
-  L = (word0 (x) & Exp_mask) - (P - 1) * Exp_msk1;
-#ifndef Sudden_Underflow
-  if (L > 0)
-    {
-#endif
-#ifdef IBM
-      L |= Exp_msk1 >> 4;
-#endif
-      word0 (a) = L;
-#ifndef _DOUBLE_IS_32BITS
-      word1 (a) = 0;
-#endif
-
-#ifndef Sudden_Underflow
-    }
-  else
-    {
-      L = -L >> Exp_shift;
-      if (L < Exp_shift)
-	{
-	  word0 (a) = 0x80000 >> L;
-#ifndef _DOUBLE_IS_32BITS
-	  word1 (a) = 0;
-#endif
-	}
-      else
-	{
-	  word0 (a) = 0;
-	  L -= Exp_shift;
-#ifndef _DOUBLE_IS_32BITS
-         word1 (a) = L >= 31 ? 1 : 1 << (31 - L);
-#endif
-	}
-    }
-#endif
-  return a.d;
-}
-
-double
-_DEFUN (b2d, (a, e),
-	_Bigint * a _AND int *e)
-{
-  __ULong *xa, *xa0, w, y, z;
-  int k;
-  union double_union d;
-#ifdef VAX
-  __ULong d0, d1;
-#else
-#define d0 word0(d)
-#define d1 word1(d)
-#endif
-
-  xa0 = a->_x;
-  xa = xa0 + a->_wds;
-  y = *--xa;
-#ifdef DEBUG
-  if (!y)
-    Bug ("zero y in b2d");
-#endif
-  k = hi0bits (y);
-  *e = 32 - k;
-#ifdef Pack_32
-  if (k < Ebits)
-    {
-      d0 = Exp_1 | y >> (Ebits - k);
-      w = xa > xa0 ? *--xa : 0;
-#ifndef _DOUBLE_IS_32BITS
-      d1 = y << ((32 - Ebits) + k) | w >> (Ebits - k);
-#endif
-      goto ret_d;
-    }
-  z = xa > xa0 ? *--xa : 0;
-  if (k -= Ebits)
-    {
-      d0 = Exp_1 | y << k | z >> (32 - k);
-      y = xa > xa0 ? *--xa : 0;
-#ifndef _DOUBLE_IS_32BITS
-      d1 = z << k | y >> (32 - k);
-#endif
-    }
-  else
-    {
-      d0 = Exp_1 | y;
-#ifndef _DOUBLE_IS_32BITS
-      d1 = z;
-#endif
-    }
-#else
-  if (k < Ebits + 16)
-    {
-      z = xa > xa0 ? *--xa : 0;
-      d0 = Exp_1 | y << k - Ebits | z >> Ebits + 16 - k;
-      w = xa > xa0 ? *--xa : 0;
-      y = xa > xa0 ? *--xa : 0;
-      d1 = z << k + 16 - Ebits | w << k - Ebits | y >> 16 + Ebits - k;
-      goto ret_d;
-    }
-  z = xa > xa0 ? *--xa : 0;
-  w = xa > xa0 ? *--xa : 0;
-  k -= Ebits + 16;
-  d0 = Exp_1 | y << k + 16 | z << k | w >> 16 - k;
-  y = xa > xa0 ? *--xa : 0;
-  d1 = w << k + 16 | y << k;
-#endif
-ret_d:
-#ifdef VAX
-  word0 (d) = d0 >> 16 | d0 << 16;
-  word1 (d) = d1 >> 16 | d1 << 16;
-#else
-#undef d0
-#undef d1
-#endif
-  return d.d;
-}
-
-_Bigint *
-_DEFUN (d2b,
-	(ptr, _d, e, bits),
-	struct _reent * ptr _AND
-	double _d _AND
-	int *e _AND
-	int *bits)
-
-{
-  union double_union d;
-  _Bigint *b;
-  int de, i, k;
-  __ULong *x, y, z;
-#ifdef VAX
-  __ULong d0, d1;
-#endif
-  d.d = _d;
-#ifdef VAX
-  d0 = word0 (d) >> 16 | word0 (d) << 16;
-  d1 = word1 (d) >> 16 | word1 (d) << 16;
-#else
-#define d0 word0(d)
-#define d1 word1(d)
-  d.d = _d;
-#endif
-
-#ifdef Pack_32
-  b = Balloc (ptr, 1);
-#else
-  b = Balloc (ptr, 2);
-#endif
-  x = b->_x;
-
-  z = d0 & Frac_mask;
-  d0 &= 0x7fffffff;		/* clear sign bit, which we ignore */
-#ifdef Sudden_Underflow
-  de = (int) (d0 >> Exp_shift);
-#ifndef IBM
-  z |= Exp_msk11;
-#endif
-#else
-  if ((de = (int) (d0 >> Exp_shift)) != 0)
-    z |= Exp_msk1;
-#endif
-#ifdef Pack_32
-#ifndef _DOUBLE_IS_32BITS
-  if (d1)
-    {
-      y = d1;
-      k = lo0bits (&y);
-      if (k)
-	{
-         x[0] = y | z << (32 - k);
-	  z >>= k;
-	}
-      else
-	x[0] = y;
-      i = b->_wds = (x[1] = z) ? 2 : 1;
-    }
-  else
-#endif
-    {
-#ifdef DEBUG
-      if (!z)
-	Bug ("Zero passed to d2b");
-#endif
-      k = lo0bits (&z);
-      x[0] = z;
-      i = b->_wds = 1;
-#ifndef _DOUBLE_IS_32BITS
-      k += 32;
-#endif
-    }
-#else
-  if (d1)
-    {
-      y = d1;
-      k = lo0bits (&y);
-      if (k)
-	if (k >= 16)
-	  {
-	    x[0] = y | z << 32 - k & 0xffff;
-	    x[1] = z >> k - 16 & 0xffff;
-	    x[2] = z >> k;
-	    i = 2;
-	  }
-	else
-	  {
-	    x[0] = y & 0xffff;
-	    x[1] = y >> 16 | z << 16 - k & 0xffff;
-	    x[2] = z >> k & 0xffff;
-	    x[3] = z >> k + 16;
-	    i = 3;
-	  }
-      else
-	{
-	  x[0] = y & 0xffff;
-	  x[1] = y >> 16;
-	  x[2] = z & 0xffff;
-	  x[3] = z >> 16;
-	  i = 3;
-	}
-    }
-  else
-    {
-#ifdef DEBUG
-      if (!z)
-	Bug ("Zero passed to d2b");
-#endif
-      k = lo0bits (&z);
-      if (k >= 16)
-	{
-	  x[0] = z;
-	  i = 0;
-	}
-      else
-	{
-	  x[0] = z & 0xffff;
-	  x[1] = z >> 16;
-	  i = 1;
-	}
-      k += 32;
-    }
-  while (!x[i])
-    --i;
-  b->_wds = i + 1;
-#endif
-#ifndef Sudden_Underflow
-  if (de)
-    {
-#endif
-#ifdef IBM
-      *e = (de - Bias - (P - 1) << 2) + k;
-      *bits = 4 * P + 8 - k - hi0bits (word0 (d) & Frac_mask);
-#else
-      *e = de - Bias - (P - 1) + k;
-      *bits = P - k;
-#endif
-#ifndef Sudden_Underflow
-    }
-  else
-    {
-      *e = de - Bias - (P - 1) + 1 + k;
-#ifdef Pack_32
-      *bits = 32 * i - hi0bits (x[i - 1]);
-#else
-      *bits = (i + 2) * 16 - hi0bits (x[i]);
-#endif
-    }
-#endif
-  return b;
-}
-#undef d0
-#undef d1
-
-double
-_DEFUN (ratio, (a, b), _Bigint * a _AND _Bigint * b)
-
-{
-  union double_union da, db;
-  int k, ka, kb;
-
-  da.d = b2d (a, &ka);
-  db.d = b2d (b, &kb);
-#ifdef Pack_32
-  k = ka - kb + 32 * (a->_wds - b->_wds);
-#else
-  k = ka - kb + 16 * (a->_wds - b->_wds);
-#endif
-#ifdef IBM
-  if (k > 0)
-    {
-      word0 (da) += (k >> 2) * Exp_msk1;
-      if (k &= 3)
-	da.d *= 1 << k;
-    }
-  else
-    {
-      k = -k;
-      word0 (db) += (k >> 2) * Exp_msk1;
-      if (k &= 3)
-	db.d *= 1 << k;
-    }
-#else
-  if (k > 0)
-    word0 (da) += k * Exp_msk1;
-  else
-    {
-      k = -k;
-      word0 (db) += k * Exp_msk1;
-    }
-#endif
-  return da.d / db.d;
-}
-
-
-_CONST double
-  tens[] =
-{
-  1e0, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9,
-  1e10, 1e11, 1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19,
-  1e20, 1e21, 1e22, 1e23, 1e24
-
-};
-
-#if !defined(_DOUBLE_IS_32BITS) && !defined(__v800)
-_CONST double bigtens[] =
-{1e16, 1e32, 1e64, 1e128, 1e256};
-
-_CONST double tinytens[] =
-{1e-16, 1e-32, 1e-64, 1e-128, 1e-256};
-#else
-_CONST double bigtens[] =
-{1e16, 1e32};
-
-_CONST double tinytens[] =
-{1e-16, 1e-32};
-#endif
-
-
-double
-_DEFUN (_mprec_log10, (dig),
-	int dig)
-{
-  double v = 1.0;
-  if (dig < 24)
-    return tens[dig];
-  while (dig > 0)
-    {
-      v *= 10;
-      dig--;
-    }
-  return v;
-}
diff --git a/newlib/libc/stdlib/mprec.h b/newlib/libc/stdlib/mprec.h
deleted file mode 100644
index 4ca48f22f..000000000
--- a/newlib/libc/stdlib/mprec.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/****************************************************************
- *
- * The author of this software is David M. Gay.
- *
- * Copyright (c) 1991 by AT&T.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- ***************************************************************/
-
-/* Please send bug reports to
-	David M. Gay
-	AT&T Bell Laboratories, Room 2C-463
-	600 Mountain Avenue
-	Murray Hill, NJ 07974-2070
-	U.S.A.
-	dmg@research.att.com or research!dmg
- */
-
-#include <ieeefp.h>
-#include <math.h>
-#include <float.h>
-#include <errno.h>
-#include <sys/config.h>
-#include <sys/types.h>
-
-#ifdef __IEEE_LITTLE_ENDIAN
-#define IEEE_8087
-#endif
-
-#ifdef __IEEE_BIG_ENDIAN
-#define IEEE_MC68k
-#endif
-
-#ifdef __Z8000__
-#define Just_16
-#endif
-
-#ifdef DEBUG
-#include "stdio.h"
-#define Bug(x) {fprintf(stderr, "%s\n", x); exit(1);}
-#endif
-
-#ifdef Unsigned_Shifts
-#define Sign_Extend(a,b) if (b < 0) a |= (__uint32_t)0xffff0000;
-#else
-#define Sign_Extend(a,b) /*no-op*/
-#endif
-
-#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1
-Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined.
-#endif
-
-/* If we are going to examine or modify specific bits in a double using
-   the word0 and/or word1 macros, then we must wrap the double inside
-   a union.  This is necessary to avoid undefined behavior according to
-   the ANSI C spec.  */
-union double_union
-{
-  double d;
-  __uint32_t i[2];
-};
-
-#ifdef IEEE_8087
-#define word0(x) (x.i[1])
-#define word1(x) (x.i[0])
-#else
-#define word0(x) (x.i[0])
-#define word1(x) (x.i[1])
-#endif
-
-/* The following definition of Storeinc is appropriate for MIPS processors.
- * An alternative that might be better on some machines is
- * #define Storeinc(a,b,c) (*a++ = b << 16 | c & 0xffff)
- */
-#if defined (__IEEE_BYTES_LITTLE_ENDIAN) + defined (IEEE_8087) + defined (VAX)
-#define Storeinc(a,b,c) (((unsigned short *)a)[1] = (unsigned short)b, \
-((unsigned short *)a)[0] = (unsigned short)c, a++)
-#else
-#define Storeinc(a,b,c) (((unsigned short *)a)[0] = (unsigned short)b, \
-((unsigned short *)a)[1] = (unsigned short)c, a++)
-#endif
-
-/* #define P DBL_MANT_DIG */
-/* Ten_pmax = floor(P*log(2)/log(5)) */
-/* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 */
-/* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) */
-/* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */
-
-#if defined(IEEE_8087) + defined(IEEE_MC68k)
-#if defined (_DOUBLE_IS_32BITS) 
-#define Exp_shift   23
-#define Exp_shift1  23
-#define Exp_msk1    ((__uint32_t)0x00800000L)
-#define Exp_msk11   ((__uint32_t)0x00800000L)
-#define Exp_mask    ((__uint32_t)0x7f800000L)
-#define P    	    24
-#define Bias 	    127
-#if 0
-#define IEEE_Arith  /* it is, but the code doesn't handle IEEE singles yet */
-#endif
-#define Emin        (-126)
-#define Exp_1       ((__uint32_t)0x3f800000L)
-#define Exp_11      ((__uint32_t)0x3f800000L)
-#define Ebits 	    8
-#define Frac_mask   ((__uint32_t)0x007fffffL)
-#define Frac_mask1  ((__uint32_t)0x007fffffL)
-#define Ten_pmax    10
-#define Sign_bit    ((__uint32_t)0x80000000L)
-#define Ten_pmax    10
-#define Bletch	    2
-#define Bndry_mask  ((__uint32_t)0x007fffffL)
-#define Bndry_mask1 ((__uint32_t)0x007fffffL)
-#define LSB 1
-#define Sign_bit    ((__uint32_t)0x80000000L)
-#define Log2P 	    1
-#define Tiny0 	    0
-#define Tiny1 	    1
-#define Quick_max   5
-#define Int_max     6
-#define Infinite(x) (word0(x) == ((__uint32_t)0x7f800000L))
-#undef word0
-#undef word1
-
-#define word0(x) (x.i[0])
-#define word1(x) 0
-#else
-
-#define Exp_shift  20
-#define Exp_shift1 20
-#define Exp_msk1    ((__uint32_t)0x100000L)
-#define Exp_msk11   ((__uint32_t)0x100000L)
-#define Exp_mask  ((__uint32_t)0x7ff00000L)
-#define P 53
-#define Bias 1023
-#define IEEE_Arith
-#define Emin (-1022)
-#define Exp_1  ((__uint32_t)0x3ff00000L)
-#define Exp_11 ((__uint32_t)0x3ff00000L)
-#define Ebits 11
-#define Frac_mask  ((__uint32_t)0xfffffL)
-#define Frac_mask1 ((__uint32_t)0xfffffL)
-#define Ten_pmax 22
-#define Bletch 0x10
-#define Bndry_mask  ((__uint32_t)0xfffffL)
-#define Bndry_mask1 ((__uint32_t)0xfffffL)
-#define LSB 1
-#define Sign_bit ((__uint32_t)0x80000000L)
-#define Log2P 1
-#define Tiny0 0
-#define Tiny1 1
-#define Quick_max 14
-#define Int_max 14
-#define Infinite(x) (word0(x) == ((__uint32_t)0x7ff00000L)) /* sufficient test for here */
-#endif
-
-#else
-#undef  Sudden_Underflow
-#define Sudden_Underflow
-#ifdef IBM
-#define Exp_shift  24
-#define Exp_shift1 24
-#define Exp_msk1   ((__uint32_t)0x1000000L)
-#define Exp_msk11  ((__uint32_t)0x1000000L)
-#define Exp_mask  ((__uint32_t)0x7f000000L)
-#define P 14
-#define Bias 65
-#define Exp_1  ((__uint32_t)0x41000000L)
-#define Exp_11 ((__uint32_t)0x41000000L)
-#define Ebits 8	/* exponent has 7 bits, but 8 is the right value in b2d */
-#define Frac_mask  ((__uint32_t)0xffffffL)
-#define Frac_mask1 ((__uint32_t)0xffffffL)
-#define Bletch 4
-#define Ten_pmax 22
-#define Bndry_mask  ((__uint32_t)0xefffffL)
-#define Bndry_mask1 ((__uint32_t)0xffffffL)
-#define LSB 1
-#define Sign_bit ((__uint32_t)0x80000000L)
-#define Log2P 4
-#define Tiny0 ((__uint32_t)0x100000L)
-#define Tiny1 0
-#define Quick_max 14
-#define Int_max 15
-#else /* VAX */
-#define Exp_shift  23
-#define Exp_shift1 7
-#define Exp_msk1    0x80
-#define Exp_msk11   ((__uint32_t)0x800000L)
-#define Exp_mask  ((__uint32_t)0x7f80L)
-#define P 56
-#define Bias 129
-#define Exp_1  ((__uint32_t)0x40800000L)
-#define Exp_11 ((__uint32_t)0x4080L)
-#define Ebits 8
-#define Frac_mask  ((__uint32_t)0x7fffffL)
-#define Frac_mask1 ((__uint32_t)0xffff007fL)
-#define Ten_pmax 24
-#define Bletch 2
-#define Bndry_mask  ((__uint32_t)0xffff007fL)
-#define Bndry_mask1 ((__uint32_t)0xffff007fL)
-#define LSB ((__uint32_t)0x10000L)
-#define Sign_bit ((__uint32_t)0x8000L)
-#define Log2P 1
-#define Tiny0 0x80
-#define Tiny1 0
-#define Quick_max 15
-#define Int_max 15
-#endif
-#endif
-
-#ifndef IEEE_Arith
-#define ROUND_BIASED
-#endif
-
-#ifdef RND_PRODQUOT
-#define rounded_product(a,b) a = rnd_prod(a, b)
-#define rounded_quotient(a,b) a = rnd_quot(a, b)
-#ifdef KR_headers
-extern double rnd_prod(), rnd_quot();
-#else
-extern double rnd_prod(double, double), rnd_quot(double, double);
-#endif
-#else
-#define rounded_product(a,b) a *= b
-#define rounded_quotient(a,b) a /= b
-#endif
-
-#define Big0 (Frac_mask1 | Exp_msk1*(DBL_MAX_EXP+Bias-1))
-#define Big1 ((__uint32_t)0xffffffffL)
-
-#ifndef Just_16
-/* When Pack_32 is not defined, we store 16 bits per 32-bit long.
- * This makes some inner loops simpler and sometimes saves work
- * during multiplications, but it often seems to make things slightly
- * slower.  Hence the default is now to store 32 bits per long.
- */
-
-#ifndef Pack_32
-#define Pack_32
-#endif
-#endif
-
-
-#ifdef __cplusplus
-extern "C" double strtod(const char *s00, char **se);
-extern "C" char *dtoa(double d, int mode, int ndigits,
-			int *decpt, int *sign, char **rve);
-#endif
-
-
-typedef struct _Bigint _Bigint;
-
-#define Balloc	_Balloc
-#define Bfree	_Bfree
-#define multadd _multadd
-#define s2b	_s2b
-#define lo0bits _lo0bits
-#define hi0bits _hi0bits
-#define i2b	_i2b
-#define mult	_multiply
-#define pow5mult	_pow5mult
-#define lshift	_lshift
-#define cmp	__mcmp
-#define diff	__mdiff
-#define ulp 	_ulp
-#define b2d	_b2d
-#define d2b	_d2b
-#define ratio	_ratio
-
-#define tens __mprec_tens
-#define bigtens __mprec_bigtens
-#define tinytens __mprec_tinytens
-
-struct _reent ;
-double 		_EXFUN(ulp,(double x));
-double		_EXFUN(b2d,(_Bigint *a , int *e));
-_Bigint *	_EXFUN(Balloc,(struct _reent *p, int k));
-void 		_EXFUN(Bfree,(struct _reent *p, _Bigint *v));
-_Bigint *	_EXFUN(multadd,(struct _reent *p, _Bigint *, int, int));
-_Bigint *	_EXFUN(s2b,(struct _reent *, const char*, int, int, __ULong));
-_Bigint	*	_EXFUN(i2b,(struct _reent *,int));
-_Bigint *	_EXFUN(mult, (struct _reent *, _Bigint *, _Bigint *));
-_Bigint *	_EXFUN(pow5mult, (struct _reent *, _Bigint *, int k));
-int 		_EXFUN(hi0bits,(__ULong));
-int 		_EXFUN(lo0bits,(__ULong *));
-_Bigint *        _EXFUN(d2b,(struct _reent *p, double d, int *e, int *bits));
-_Bigint *        _EXFUN(lshift,(struct _reent *p, _Bigint *b, int k));
-_Bigint *        _EXFUN(diff,(struct _reent *p, _Bigint *a, _Bigint *b));
-int             _EXFUN(cmp,(_Bigint *a, _Bigint *b));
-
-double		_EXFUN(ratio,(_Bigint *a, _Bigint *b));
-#define Bcopy(x,y) memcpy((char *)&x->_sign, (char *)&y->_sign, y->_wds*sizeof(__Long) + 2*sizeof(int))
-
-#if defined(_DOUBLE_IS_32BITS) && defined(__v800)
-#define n_bigtens 2
-#else
-#define n_bigtens 5
-#endif
-
-extern _CONST double tinytens[];
-extern _CONST double bigtens[];
-extern _CONST double tens[];
-
-
-double _EXFUN(_mprec_log10,(int));
diff --git a/newlib/libc/stdlib/mrand48.c b/newlib/libc/stdlib/mrand48.c
deleted file mode 100644
index 28f4f7d2b..000000000
--- a/newlib/libc/stdlib/mrand48.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-long
-_DEFUN (_mrand48_r, (r),
-       struct _reent *r)
-{
-  _REENT_CHECK_RAND48(r);
-  __dorand48(r, __rand48_seed);
-  return ((long) __rand48_seed[2] << 16) + (long) __rand48_seed[1];
-}
-
-#ifndef _REENT_ONLY
-long
-_DEFUN_VOID (mrand48)
-{
-  return _mrand48_r (_REENT);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/msize.c b/newlib/libc/stdlib/msize.c
deleted file mode 100644
index e33e4aa37..000000000
--- a/newlib/libc/stdlib/msize.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef MALLOC_PROVIDED
-/* msize.c -- a wrapper for malloc_usable_size.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-size_t
-_DEFUN (malloc_usable_size, (ptr),
-	_PTR ptr)
-{
-  return _malloc_usable_size_r (_REENT, ptr);
-}
-
-#endif
-#endif
diff --git a/newlib/libc/stdlib/mstats.c b/newlib/libc/stdlib/mstats.c
deleted file mode 100644
index 2b6c6bc19..000000000
--- a/newlib/libc/stdlib/mstats.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* VxWorks provides its own version of malloc, and we can't use this
-   one because VxWorks does not provide sbrk.  So we have a hook to
-   not compile this code.  */
-
-#ifdef MALLOC_PROVIDED
-
-int _dummy_mstats = 1;
-
-#else
-
-/*
-FUNCTION
-<<mallinfo>>, <<malloc_stats>>, <<mallopt>>--malloc support
-
-INDEX
-	mallinfo
-INDEX
-	malloc_stats
-INDEX
-	mallopt
-INDEX
-	_mallinfo_r
-INDEX
-	_malloc_stats_r
-INDEX
-	_mallopt_r
-
-ANSI_SYNOPSIS
-	#include <malloc.h>
-	struct mallinfo mallinfo(void);
-	void malloc_stats(void);
-	int mallopt(int <[parameter]>, <[value]>);
-
-	struct mallinfo _mallinfo_r(void *<[reent]>);
-	void _malloc_stats_r(void *<[reent]>);
-	int _mallopt_r(void *<[reent]>, int <[parameter]>, <[value]>);
-
-TRAD_SYNOPSIS
-	#include <malloc.h>
-	struct mallinfo mallinfo();
-
-	void malloc_stats();
-
-	int mallopt(<[parameter]>, <[value]>)
-	int <[parameter]>;
-	int <[value]>;
-
-	struct mallinfo _mallinfo_r(<[reent]>);
-	char *<[reent]>;
-
-	void _malloc_stats_r(<[reent]>);
-	char *<[reent]>;
-
-	int _mallopt_r(<[reent]>, <[parameter]>, <[value]>)
-	char *<[reent]>;
-	int <[parameter]>;
-	int <[value]>;
-
-DESCRIPTION
-<<mallinfo>> returns a structure describing the current state of
-memory allocation.  The structure is defined in malloc.h.  The
-following fields are defined: <<arena>> is the total amount of space
-in the heap; <<ordblks>> is the number of chunks which are not in use;
-<<uordblks>> is the total amount of space allocated by <<malloc>>;
-<<fordblks>> is the total amount of space not in use; <<keepcost>> is
-the size of the top most memory block.
-
-<<malloc_stats>> print some statistics about memory allocation on
-standard error.
-
-<<mallopt>> takes a parameter and a value.  The parameters are defined
-in malloc.h, and may be one of the following: <<M_TRIM_THRESHOLD>>
-sets the maximum amount of unused space in the top most block before
-releasing it back to the system in <<free>> (the space is released by
-calling <<_sbrk_r>> with a negative argument); <<M_TOP_PAD>> is the
-amount of padding to allocate whenever <<_sbrk_r>> is called to
-allocate more space.
-
-The alternate functions <<_mallinfo_r>>, <<_malloc_stats_r>>, and
-<<_mallopt_r>> are reentrant versions.  The extra argument <[reent]>
-is a pointer to a reentrancy structure.
-
-RETURNS
-<<mallinfo>> returns a mallinfo structure.  The structure is defined
-in malloc.h.
-
-<<malloc_stats>> does not return a result.
-
-<<mallopt>> returns zero if the parameter could not be set, or
-non-zero if it could be set.
-
-PORTABILITY
-<<mallinfo>> and <<mallopt>> are provided by SVR4, but <<mallopt>>
-takes different parameters on different systems.  <<malloc_stats>> is
-not portable.
-
-*/
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-#include <stdio.h>
-
-#ifndef _REENT_ONLY
-
-struct mallinfo
-_DEFUN_VOID (mallinfo)
-{
-  return _mallinfo_r (_REENT);
-}
-
-#if !defined (_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-void
-_DEFUN_VOID (malloc_stats)
-{
-  _malloc_stats_r (_REENT);
-}
-
-int
-_DEFUN (mallopt, (p, v),
-	int p _AND
-	int v)
-{
-  return _mallopt_r (_REENT, p, v);
-}
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-#endif
-
-#if !defined (_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-
-/* mstats is now compatibility code.  It used to be real, for a
-   previous version of the malloc routines.  It now just calls
-   malloc_stats.  */
-
-void
-_DEFUN (_mstats_r, (ptr, s),
-	struct _reent *ptr _AND
-	char *s)
-{
-  _REENT_SMALL_CHECK_INIT(_stderr_r (ptr));
-  fiprintf (_stderr_r (ptr), "Memory allocation statistics %s\n", s);
-  _malloc_stats_r (ptr);
-}
-
-#ifndef _REENT_ONLY
-void
-_DEFUN (mstats, (s),
-	char *s)
-{
-  _mstats_r (_REENT, s);
-}
-
-#endif
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-#endif /* ! defined (MALLOC_PROVIDED) */
diff --git a/newlib/libc/stdlib/mtrim.c b/newlib/libc/stdlib/mtrim.c
deleted file mode 100644
index 328eb715e..000000000
--- a/newlib/libc/stdlib/mtrim.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef MALLOC_PROVIDED
-/* mtrim.c -- a wrapper for malloc_trim.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-int
-_DEFUN (malloc_trim, (pad),
-	size_t pad)
-{
-  return _malloc_trim_r (_REENT, pad);
-}
-
-#endif
-#endif
diff --git a/newlib/libc/stdlib/nrand48.c b/newlib/libc/stdlib/nrand48.c
deleted file mode 100644
index 39e9fb13c..000000000
--- a/newlib/libc/stdlib/nrand48.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-long
-_DEFUN (_nrand48_r, (r, xseed),
-       struct _reent *r _AND
-       unsigned short xseed[3])
-{
-  __dorand48 (r, xseed);
-  return (long)((unsigned long) xseed[2] << 15) +
-    ((unsigned long) xseed[1] >> 1);
-}
-
-#ifndef _REENT_ONLY
-long
-_DEFUN (nrand48, (xseed),
-       unsigned short xseed[3])
-{
-  return _nrand48_r (_REENT, xseed);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/on_exit.c b/newlib/libc/stdlib/on_exit.c
deleted file mode 100644
index f3383501f..000000000
--- a/newlib/libc/stdlib/on_exit.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * %sccs.include.redist.c%
- *
- * This function is a modified version of atexit.c
- */
-
-/*
-FUNCTION
-<<on_exit>>---request execution of function with argument at program exit
-
-INDEX
-	on_exit
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int on_exit (void (*<[function]>)(int, void *), void *<[arg]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int on_exit ((<[function]>, <[arg]>)
-	  void (*<[function]>)(int, void *);
-	  void *<[arg]>;
-
-DESCRIPTION
-You can use <<on_exit>> to enroll functions in a list of functions that
-will be called when your program terminates normally.  The argument is
-a pointer to a user-defined function which takes two arguments.  The
-first is the status code passed to exit and the second argument is of type
-pointer to void.  The function must not return a result.  The value
-of <[arg]> is registered and passed as the argument to <[function]>.
-
-The functions are kept in a LIFO stack; that is, the last function
-enrolled by <<atexit>> or <<on_exit>> will be the first to execute when 
-your program exits.  You can intermix functions using <<atexit>> and
-<<on_exit>>.
-
-There is no built-in limit to the number of functions you can enroll
-in this list; however, after every group of 32 functions is enrolled,
-<<atexit>>/<<on_exit>> will call <<malloc>> to get space for the next part 
-of the list.   The initial list of 32 functions is statically allocated, so
-you can always count on at least that many slots available.
-
-RETURNS
-<<on_exit>> returns <<0>> if it succeeds in enrolling your function,
-<<-1>> if it fails (possible only if no space was available for
-<<malloc>> to extend the list of functions).
-
-PORTABILITY
-<<on_exit>> is a non-standard glibc extension
-
-Supporting OS subroutines required: None
-*/
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Register a function to be performed at exit.
- */
-
-int
-_DEFUN (on_exit,
-	(fn, arg),
-	_VOID _EXFUN ((*fn), (int, _PTR)) _AND
-        _PTR arg)
-{
-  struct _on_exit_args * args;
-  register struct _atexit *p;
-  void (*x)(void) = (void (*)(void))fn;
-
-/* _REENT_SMALL on_exit() doesn't allow more than the required 32 entries.  */
-#ifdef _REENT_SMALL
-  p = &_GLOBAL_REENT->_atexit;
-  if (p->_ind >= _ATEXIT_SIZE)
-    return -1;
-  args = p->_on_exit_args_ptr;
-  if (args == NULL)
-    {
-      args = malloc (sizeof * p->_on_exit_args_ptr);
-      if (args == NULL)
-        return -1;
-      args->_fntypes = 0;
-      p->_on_exit_args_ptr = args;
-    }
-#else
-  if ((p = _GLOBAL_REENT->_atexit) == NULL)
-    _GLOBAL_REENT->_atexit = p = &_GLOBAL_REENT->_atexit0;
-  if (p->_ind >= _ATEXIT_SIZE)
-    {
-      if ((p = (struct _atexit *) malloc (sizeof *p)) == NULL)
-        return -1;
-      p->_ind = 0;
-      p->_on_exit_args._fntypes = 0;
-      p->_next = _GLOBAL_REENT->_atexit;
-      _GLOBAL_REENT->_atexit = p;
-    }
-  args = & p->_on_exit_args;
-#endif
-  args->_fntypes |= (1 << p->_ind);
-  args->_fnargs[p->_ind] = arg;
-  p->_fns[p->_ind++] = x;
-  return 0;
-}
diff --git a/newlib/libc/stdlib/putenv.c b/newlib/libc/stdlib/putenv.c
deleted file mode 100644
index 8ee67d7d5..000000000
--- a/newlib/libc/stdlib/putenv.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*-
- * Copyright (c) 1988 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <string.h>
-
-int
-_DEFUN (putenv, (str),
-	_CONST char *str)
-{
-  return _putenv_r (_REENT, str);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/putenv_r.c b/newlib/libc/stdlib/putenv_r.c
deleted file mode 100644
index a03f3b007..000000000
--- a/newlib/libc/stdlib/putenv_r.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* This file may have been modified by DJ Delorie (Jan 1991).  If so,
-** these modifications are Copyright (C) 1991 DJ Delorie.
-*/
-
-/*-
- * Copyright (c) 1988 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <reent.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "envlock.h"
-
-/* _putenv_r - reentrant version of putenv that either adds
-               or replaces the environment variable "name"
-               with "value" which is specified by str as "name=value". */
-int
-_DEFUN (_putenv_r, (reent_ptr, str),
-	struct _reent *reent_ptr _AND
-	_CONST char   *str)
-{
-  register char *p, *equal;
-  int rval;
-
-  p = _strdup_r (reent_ptr, str);
-
-  if (!p)
-    return 1;
-
-  if (!(equal = index (p, '=')))
-    {
-      (void) _free_r (reent_ptr, p);
-      return 1;
-    }
-
-  *equal = '\0';
-  rval = _setenv_r (reent_ptr, p, equal + 1, 1);
-  (void) _free_r (reent_ptr, p);
-
-  return rval;
-}
diff --git a/newlib/libc/stdlib/rand.c b/newlib/libc/stdlib/rand.c
deleted file mode 100644
index 4f5a60796..000000000
--- a/newlib/libc/stdlib/rand.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-FUNCTION
-<<rand>>, <<srand>>---pseudo-random numbers
-
-INDEX
-	rand
-INDEX
-	srand
-INDEX
-	rand_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int rand(void);
-	void srand(unsigned int <[seed]>);
-	int rand_r(unsigned int *<[seed]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int rand();
-
-	void srand(<[seed]>)
-	unsigned int <[seed]>;
-
-	void rand_r(<[seed]>)
-	unsigned int *<[seed]>;
-
-
-DESCRIPTION
-<<rand>> returns a different integer each time it is called; each
-integer is chosen by an algorithm designed to be unpredictable, so
-that you can use <<rand>> when you require a random number.
-The algorithm depends on a static variable called the ``random seed'';
-starting with a given value of the random seed always produces the
-same sequence of numbers in successive calls to <<rand>>.
-
-You can set the random seed using <<srand>>; it does nothing beyond
-storing its argument in the static variable used by <<rand>>.  You can
-exploit this to make the pseudo-random sequence less predictable, if
-you wish, by using some other unpredictable value (often the least
-significant parts of a time-varying value) as the random seed before
-beginning a sequence of calls to <<rand>>; or, if you wish to ensure
-(for example, while debugging) that successive runs of your program
-use the same ``random'' numbers, you can use <<srand>> to set the same
-random seed at the outset.
-
-RETURNS
-<<rand>> returns the next pseudo-random integer in sequence; it is a
-number between <<0>> and <<RAND_MAX>> (inclusive).
-
-<<srand>> does not return a result.
-
-NOTES
-<<rand>> and <<srand>> are unsafe for multi-thread applications.
-<<rand_r>> is MT-Safe and should be used instead.
-
-
-PORTABILITY
-<<rand>> is required by ANSI, but the algorithm for pseudo-random
-number generation is not specified; therefore, even if you use
-the same random seed, you cannot expect the same sequence of results
-on two different systems.
-
-<<rand>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <reent.h>
-
-void
-_DEFUN (srand, (seed), unsigned int seed)
-{
-        _REENT_RAND_NEXT(_REENT) = seed;
-}
-
-int
-_DEFUN_VOID (rand)
-{
-  /* This multiplier was obtained from Knuth, D.E., "The Art of
-     Computer Programming," Vol 2, Seminumerical Algorithms, Third
-     Edition, Addison-Wesley, 1998, p. 106 (line 26) & p. 108 */
-  _REENT_CHECK_RAND48(_REENT);
-  _REENT_RAND_NEXT(_REENT) = 
-     _REENT_RAND_NEXT(_REENT) * __extension__ 6364136223846793005LL + 1;
-  return (int)((_REENT_RAND_NEXT(_REENT) >> 32) & RAND_MAX);
-}
-
-#endif /* _REENT_ONLY */
diff --git a/newlib/libc/stdlib/rand48.c b/newlib/libc/stdlib/rand48.c
deleted file mode 100644
index 17fd04e92..000000000
--- a/newlib/libc/stdlib/rand48.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-/*
-FUNCTION
-   <<rand48>>, <<drand48>>, <<erand48>>, <<lrand48>>, <<nrand48>>, <<mrand48>>, <<jrand48>>, <<srand48>>, <<seed48>>, <<lcong48>> ---pseudo random number generators and initialization routines
-
-INDEX
-       rand48
-INDEX
-       drand48
-INDEX
-       erand48
-INDEX
-       lrand48
-INDEX
-       nrand48
-INDEX
-       mrand48
-INDEX
-       jrand48
-INDEX
-       srand48
-INDEX
-       seed48
-INDEX
-       lcong48
-
-ANSI_SYNOPSIS
-       #include <stdlib.h>
-       double drand48(void);
-       double erand48(unsigned short <[xseed]>[3]);
-       long lrand48(void);
-       long nrand48(unsigned short <[xseed]>[3]);
-       long mrand48(void);
-       long jrand48(unsigned short <[xseed]>[3]);
-       void srand48(long <[seed]>);
-       unsigned short *seed48(unsigned short <[xseed]>[3]);
-       void lcong48(unsigned short <[p]>[7]);
-
-TRAD_SYNOPSIS
-       #include <stdlib.h>
-       double drand48();
-
-       double erand48(<[xseed]>)
-       unsigned short <[xseed]>[3];
-
-       long lrand48();
-
-       long nrand48(<[xseed]>)
-       unsigned short <[xseed]>[3];
-
-       long mrand48();
-
-       long jrand48(<[xseed]>)
-       unsigned short <[xseed]>[3];
-
-       void srand48(<[seed]>)
-       long <[seed]>;
-
-       unsigned short *seed48(<[xseed]>)
-       unsigned short <[xseed]>[3];
-
-       void lcong48(<[p]>)
-       unsigned short <[p]>[7];
-
-DESCRIPTION
-The <<rand48>> family of functions generates pseudo-random numbers
-using a linear congruential algorithm working on integers 48 bits in size.
-The particular formula employed is
-r(n+1) = (a * r(n) + c) mod m
-where the default values are
-for the multiplicand a = 0xfdeece66d = 25214903917 and
-the addend c = 0xb = 11. The modulo is always fixed at m = 2 ** 48.
-r(n) is called the seed of the random number generator.
-
-For all the six generator routines described next, the first
-computational step is to perform a single iteration of the algorithm.
-
-<<drand48>> and <<erand48>>
-return values of type double. The full 48 bits of r(n+1) are
-loaded into the mantissa of the returned value, with the exponent set
-such that the values produced lie in the interval [0.0, 1.0].
-
-<<lrand48>> and <<nrand48>>
-return values of type long in the range
-[0, 2**31-1]. The high-order (31) bits of
-r(n+1) are loaded into the lower bits of the returned value, with
-the topmost (sign) bit set to zero.
-
-<<mrand48>> and <<jrand48>>
-return values of type long in the range
-[-2**31, 2**31-1]. The high-order (32) bits of
-r(n+1) are loaded into the returned value.
-
-<<drand48>>, <<lrand48>>, and <<mrand48>>
-use an internal buffer to store r(n). For these functions
-the initial value of r(0) = 0x1234abcd330e = 20017429951246.
-
-On the other hand, <<erand48>>, <<nrand48>>, and <<jrand48>>
-use a user-supplied buffer to store the seed r(n),
-which consists of an array of 3 shorts, where the zeroth member
-holds the least significant bits.
-
-All functions share the same multiplicand and addend.
-
-<<srand48>> is used to initialize the internal buffer r(n) of
-<<drand48>>, <<lrand48>>, and <<mrand48>>
-such that the 32 bits of the seed value are copied into the upper 32 bits
-of r(n), with the lower 16 bits of r(n) arbitrarily being set to 0x330e.
-Additionally, the constant multiplicand and addend of the algorithm are
-reset to the default values given above.
-
-<<seed48>> also initializes the internal buffer r(n) of
-<<drand48>>, <<lrand48>>, and <<mrand48>>,
-but here all 48 bits of the seed can be specified in an array of 3 shorts,
-where the zeroth member specifies the lowest bits. Again,
-the constant multiplicand and addend of the algorithm are
-reset to the default values given above.
-<<seed48>> returns a pointer to an array of 3 shorts which contains
-the old seed.
-This array is statically allocated, thus its contents are lost after
-each new call to <<seed48>>.
-
-Finally, <<lcong48>> allows full control over the multiplicand and
-addend used in <<drand48>>, <<erand48>>, <<lrand48>>, <<nrand48>>,
-<<mrand48>>, and <<jrand48>>,
-and the seed used in <<drand48>>, <<lrand48>>, and <<mrand48>>.
-An array of 7 shorts is passed as parameter; the first three shorts are
-used to initialize the seed; the second three are used to initialize the
-multiplicand; and the last short is used to initialize the addend.
-It is thus not possible to use values greater than 0xffff as the addend.
-
-Note that all three methods of seeding the random number generator
-always also set the multiplicand and addend for any of the six
-generator calls.
-
-For a more powerful random number generator, see <<random>>.
-
-PORTABILITY
-SUS requires these functions.
-
-No supporting OS subroutines are required.
-*/
-
-#include "rand48.h"
-
-void
-_DEFUN (__dorand48, (r, xseed),
-       struct _reent *r _AND
-       unsigned short xseed[3])
-{
-  unsigned long accu;
-  unsigned short temp[2];
-
-  _REENT_CHECK_RAND48(r);
-  accu = (unsigned long) __rand48_mult[0] * (unsigned long) xseed[0] +
-    (unsigned long) __rand48_add;
-  temp[0] = (unsigned short) accu;     /* lower 16 bits */
-  accu >>= sizeof(unsigned short) * 8;
-  accu += (unsigned long) __rand48_mult[0] * (unsigned long) xseed[1] +
-    (unsigned long) __rand48_mult[1] * (unsigned long) xseed[0];
-  temp[1] = (unsigned short) accu;     /* middle 16 bits */
-  accu >>= sizeof(unsigned short) * 8;
-  accu += __rand48_mult[0] * xseed[2] + __rand48_mult[1] * xseed[1] + __rand48_mult[2] * xseed[0];
-  xseed[0] = temp[0];
-  xseed[1] = temp[1];
-  xseed[2] = (unsigned short) accu;
-}
diff --git a/newlib/libc/stdlib/rand48.h b/newlib/libc/stdlib/rand48.h
deleted file mode 100644
index a6cb479ef..000000000
--- a/newlib/libc/stdlib/rand48.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#ifndef _RAND48_H_
-#define _RAND48_H_
-
-#include <math.h>
-#include <stdlib.h>
-
-extern void _EXFUN(__dorand48,(struct _reent *r, unsigned short[3]));
-#define __rand48_seed	_REENT_RAND48_SEED(r)
-#define __rand48_mult	_REENT_RAND48_MULT(r)
-#define __rand48_add	_REENT_RAND48_ADD(r)
-
-#if 0
-/* following values are defined in <sys/reent.h> */
-#define        RAND48_SEED_0   (0x330e)
-#define        RAND48_SEED_1   (0xabcd)
-#define        RAND48_SEED_2   (0x1234)
-#define        RAND48_MULT_0   (0xe66d)
-#define        RAND48_MULT_1   (0xdeec)
-#define        RAND48_MULT_2   (0x0005)
-#define        RAND48_ADD      (0x000b)
-#endif
-
-#endif /* _RAND48_H_ */
diff --git a/newlib/libc/stdlib/rand_r.c b/newlib/libc/stdlib/rand_r.c
deleted file mode 100644
index 437739ef5..000000000
--- a/newlib/libc/stdlib/rand_r.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <stdlib.h>
-
-/* Pseudo-random generator based on Minimal Standard by
-   Lewis, Goodman, and Miller in 1969.
- 
-   I[j+1] = a*I[j] (mod m)
-
-   where a = 16807
-         m = 2147483647
-
-   Using Schrage's algorithm, a*I[j] (mod m) can be rewritten as:
-  
-     a*(I[j] mod q) - r*{I[j]/q}      if >= 0
-     a*(I[j] mod q) - r*{I[j]/q} + m  otherwise
-
-   where: {} denotes integer division 
-          q = {m/a} = 127773 
-          r = m (mod a) = 2836
-
-   note that the seed value of 0 cannot be used in the calculation as
-   it results in 0 itself
-*/
-      
-int
-_DEFUN (rand_r, (seed), unsigned int *seed)
-{
-        long k;
-        long s = (long)(*seed);
-        if (s == 0)
-          s = 0x12345987;
-        k = s / 127773;
-        s = 16807 * (s - k * 127773) - 2836 * k;
-        if (s < 0)
-          s += 2147483647;
-        (*seed) = (unsigned int)s;
-        return (int)(s & RAND_MAX);
-}
diff --git a/newlib/libc/stdlib/realloc.c b/newlib/libc/stdlib/realloc.c
deleted file mode 100644
index 2caa6e4d2..000000000
--- a/newlib/libc/stdlib/realloc.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifdef MALLOC_PROVIDED
-int _dummy_calloc = 1;
-#else
-/* realloc.c -- a wrapper for realloc_r.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (realloc, (ap, nbytes),
-	_PTR ap _AND
-	size_t nbytes)
-{
-  return _realloc_r (_REENT, ap, nbytes);
-}
-
-#endif
-#endif /* MALLOC_PROVIDED */
diff --git a/newlib/libc/stdlib/seed48.c b/newlib/libc/stdlib/seed48.c
deleted file mode 100644
index 43629cc40..000000000
--- a/newlib/libc/stdlib/seed48.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-unsigned short *
-_DEFUN (_seed48_r, (r, xseed),
-       struct _reent *r _AND
-       unsigned short xseed[3])
-{
-  static unsigned short sseed[3];
-
-  _REENT_CHECK_RAND48(r);
-  sseed[0] = __rand48_seed[0];
-  sseed[1] = __rand48_seed[1];
-  sseed[2] = __rand48_seed[2];
-  __rand48_seed[0] = xseed[0];
-  __rand48_seed[1] = xseed[1];
-  __rand48_seed[2] = xseed[2];
-  __rand48_mult[0] = _RAND48_MULT_0;
-  __rand48_mult[1] = _RAND48_MULT_1;
-  __rand48_mult[2] = _RAND48_MULT_2;
-  __rand48_add = _RAND48_ADD;
-  return sseed;
-}
-
-#ifndef _REENT_ONLY
-unsigned short *
-_DEFUN (seed48, (xseed),
-       unsigned short xseed[3])
-{
-  return _seed48_r (_REENT, xseed);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/setenv.c b/newlib/libc/stdlib/setenv.c
deleted file mode 100644
index 746ce6781..000000000
--- a/newlib/libc/stdlib/setenv.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 1987 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _REENT_ONLY
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-
-extern void _unsetenv_r _PARAMS ((struct _reent *, const char *));
-
-/*
- * setenv --
- *	Set the value of the environmental variable "name" to be
- *	"value".  If rewrite is set, replace any current value.
- */
-
-int
-_DEFUN (setenv, (name, value, rewrite),
-	_CONST char *name _AND
-	_CONST char *value _AND
-	int rewrite)
-{
-  return _setenv_r (_REENT, name, value, rewrite);
-}
-
-/*
- * unsetenv(name) --
- *	Delete environmental variable "name".
- */
-void
-_DEFUN (unsetenv, (name),
-        _CONST char *name)
-{
-  _unsetenv_r (_REENT, name);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/setenv_r.c b/newlib/libc/stdlib/setenv_r.c
deleted file mode 100644
index f06dc6772..000000000
--- a/newlib/libc/stdlib/setenv_r.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* This file may have been modified by DJ Delorie (Jan 1991).  If so,
-** these modifications are Copyright (C) 1991 DJ Delorie.
-*/
-
-/*
- * Copyright (c) 1987 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <reent.h>
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include "envlock.h"
-
-extern char **environ;
-
-/* Only deal with a pointer to environ, to work around subtle bugs with shared
-   libraries and/or small data systems where the user declares his own
-   'environ'.  */
-static char ***p_environ = &environ;
-
-/* _findenv_r is defined in getenv_r.c.  */
-extern char *_findenv_r _PARAMS ((struct _reent *, const char *, int *));
-
-/*
- * _setenv_r --
- *	Set the value of the environmental variable "name" to be
- *	"value".  If rewrite is set, replace any current value.
- */
-
-int
-_DEFUN (_setenv_r, (reent_ptr, name, value, rewrite),
-        struct _reent *reent_ptr _AND
-	_CONST char *name _AND
-	_CONST char *value _AND
-	int rewrite)
-{
-  static int alloced;		/* if allocated space before */
-  register char *C;
-  int l_value, offset;
-
-  ENV_LOCK;
-
-  if (*value == '=')		/* no `=' in value */
-    ++value;
-  l_value = strlen (value);
-  if ((C = _findenv_r (reent_ptr, name, &offset)))
-    {				/* find if already exists */
-      if (!rewrite)
-        {
-          ENV_UNLOCK;
-	  return 0;
-        }
-      if (strlen (C) >= l_value)
-	{			/* old larger; copy over */
-	  while ((*C++ = *value++) != 0);
-          ENV_UNLOCK;
-	  /* if we are changing the TZ environment variable, update timezone info */
-	  if (strcmp (name, "TZ") == 0)
-	    tzset ();
-	  return 0;
-	}
-    }
-  else
-    {				/* create new slot */
-      register int cnt;
-      register char **P;
-
-      for (P = *p_environ, cnt = 0; *P; ++P, ++cnt);
-      if (alloced)
-	{			/* just increase size */
-	  *p_environ = (char **) _realloc_r (reent_ptr, (char *) environ,
-					     (size_t) (sizeof (char *) * (cnt + 2)));
-	  if (!*p_environ)
-            {
-              ENV_UNLOCK;
-	      return -1;
-            }
-	}
-      else
-	{			/* get new space */
-	  alloced = 1;		/* copy old entries into it */
-	  P = (char **) _malloc_r (reent_ptr, (size_t) (sizeof (char *) * (cnt + 2)));
-	  if (!P)
-            {
-              ENV_UNLOCK;
-	      return (-1);
-            }
-	  bcopy ((char *) *p_environ, (char *) P, cnt * sizeof (char *));
-	  *p_environ = P;
-	}
-      (*p_environ)[cnt + 1] = NULL;
-      offset = cnt;
-    }
-  for (C = (char *) name; *C && *C != '='; ++C);	/* no `=' in name */
-  if (!((*p_environ)[offset] =	/* name + `=' + value */
-	_malloc_r (reent_ptr, (size_t) ((int) (C - name) + l_value + 2))))
-    {
-      ENV_UNLOCK;
-      return -1;
-    }
-  for (C = (*p_environ)[offset]; (*C = *name++) && *C != '='; ++C);
-  for (*C++ = '='; (*C++ = *value++) != 0;);
-
-  ENV_UNLOCK;
-
-  /* if we are setting the TZ environment variable, update timezone info */
-  if (strcmp (name, "TZ") == 0)
-    tzset ();
-
-  return 0;
-}
-
-/*
- * _unsetenv_r(name) --
- *	Delete environmental variable "name".
- */
-void
-_DEFUN (_unsetenv_r, (reent_ptr, name),
-        struct _reent *reent_ptr _AND
-        _CONST char *name)
-{
-  register char **P;
-  int offset;
-
-  ENV_LOCK;
-
-  while (_findenv_r (reent_ptr, name, &offset))	/* if set multiple times */
-    for (P = &(*p_environ)[offset];; ++P)
-      if (!(*P = *(P + 1)))
-	break;
-
-  ENV_UNLOCK;
-}
diff --git a/newlib/libc/stdlib/srand48.c b/newlib/libc/stdlib/srand48.c
deleted file mode 100644
index 69bdbfc3b..000000000
--- a/newlib/libc/stdlib/srand48.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 1993 Martin Birgmeier
- * All rights reserved.
- *
- * You may redistribute unmodified or modified versions of this source
- * code provided that the above copyright notice and this and the
- * following conditions are retained.
- *
- * This software is provided ``as is'', and comes with no warranties
- * of any kind. I shall in no event be liable for anything that happens
- * to anyone/anything when using this software.
- */
-
-#include "rand48.h"
-
-_VOID
-_DEFUN (_srand48_r, (r, seed),
-       struct _reent *r _AND
-       long seed)
-{
-  _REENT_CHECK_RAND48(r);
-  __rand48_seed[0] = _RAND48_SEED_0;
-  __rand48_seed[1] = (unsigned short) seed;
-  __rand48_seed[2] = (unsigned short) ((unsigned long)seed >> 16);
-  __rand48_mult[0] = _RAND48_MULT_0;
-  __rand48_mult[1] = _RAND48_MULT_1;
-  __rand48_mult[2] = _RAND48_MULT_2;
-  __rand48_add = _RAND48_ADD;
-}
-
-#ifndef _REENT_ONLY
-_VOID
-_DEFUN (srand48, (seed),
-       long seed)
-{
-  _srand48_r (_REENT, seed);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/std.h b/newlib/libc/stdlib/std.h
deleted file mode 100644
index 287503eac..000000000
--- a/newlib/libc/stdlib/std.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
-#include <limits.h>
-#include <math.h>
-#ifndef CYGNUS_NEC
-#include <ctype.h>
-#endif
-
-#define Ise(c)		((c == 'e') || (c == 'E') || (c == 'd') || (c == 'D'))
-#define Isdigit(c)	((c <= '9') && (c >= '0'))
-#define Isspace(c)	((c == ' ') || (c == '\t') || (c=='\n') || (c=='\v') \
-                         || (c == '\r') || (c == '\f'))
-#define Issign(c)	((c == '-') || (c == '+'))
-#define Val(c)		((c - '0'))
-
-#define MAXE  308
-#define MINE  (-308)
-
-/* flags */
-#define SIGN	0x01
-#define ESIGN	0x02
-#define DECP	0x04
-
-#ifdef _HAVE_STDC
-int    		__ten_mul(double *acc, int digit);
-double		__adjust(struct _reent *ptr, double *acc, int dexp, int sign);
-const double	__exp10(unsigned x);
-#else
-int    		__ten_mul();
-double		__adjust();
-double		__exp10();
-#endif
diff --git a/newlib/libc/stdlib/stdlib.tex b/newlib/libc/stdlib/stdlib.tex
deleted file mode 100644
index 39fb915fc..000000000
--- a/newlib/libc/stdlib/stdlib.tex
+++ /dev/null
@@ -1,138 +0,0 @@
-@node Stdlib
-@chapter Standard Utility Functions (@file{stdlib.h})
-
-This chapter groups utility functions useful in a variety of programs.
-The corresponding declarations are in the header file @file{stdlib.h}.
-
-@menu 
-* abort::       Abnormal termination of a program
-* abs::         Integer absolute value (magnitude)
-* assert::      Macro for Debugging Diagnostics
-* atexit::      Request execution of functions at program exit
-* atof::        String to double or float
-* atoi::        String to integer
-* atoll::       String to long long
-* calloc::      Allocate space for arrays
-* div::         Divide two integers
-* ecvtbuf::     Double or float to string of digits
-* ecvt::        Double or float to string of digits (malloc result)
-* __env_lock::		Lock environment list for getenv and setenv
-* gvcvt::       Format double or float as string
-* exit::        End program execution
-* getenv::      Look up environment variable
-* labs::        Long integer absolute value (magnitude)
-* ldiv::        Divide two long integers
-* llabs::       Long long integer absolute value (magnitude)
-* lldiv::       Divide two long long integers
-* malloc::      Allocate and manage memory (malloc, realloc, free)
-* mallinfo::	Get information about allocated memory
-* __malloc_lock::	Lock memory pool for malloc and free
-* mbstowcs::	Minimal multibyte string to wide string converter
-* mblen::	Minimal multibyte length
-* mbtowc::      Minimal multibyte to wide character converter
-* rand::        Pseudo-random numbers
-* rand48::      Uniformly distributed pseudo-random numbers
-* strtod::      String to double or float
-* strtol::      String to long
-* strtoul::     String to unsigned long
-* system::      Execute command string
-* wcstombs::	Minimal wide string to multibyte string converter
-* wctomb::      Minimal wide character to multibyte converter
-@end menu
-
-@page
-@include stdlib/abort.def
-
-@page
-@include stdlib/abs.def
-
-@page
-@include stdlib/assert.def
-
-@page
-@include stdlib/atexit.def
-
-@page
-@include stdlib/atof.def
-
-@page
-@include stdlib/atoi.def
-
-@page
-@include stdlib/atoll.def
-
-@page
-@include stdlib/calloc.def
-
-@page
-@include stdlib/div.def
-
-@page
-@include stdlib/efgcvt.def
-
-@page
-@include stdlib/ecvtbuf.def
-
-@page
-@include stdlib/envlock.def
-
-@page
-@include stdlib/exit.def
-
-@page
-@include stdlib/getenv.def
-
-@page
-@include stdlib/labs.def
-
-@page
-@include stdlib/ldiv.def
-
-@page
-@include stdlib/llabs.def
-
-@page
-@include stdlib/lldiv.def
-
-@page
-@include stdlib/malloc.def
-
-@page
-@include stdlib/mstats.def
-
-@page
-@include stdlib/mlock.def
-
-@page
-@include stdlib/mblen.def
-
-@page
-@include stdlib/mbstowcs.def
-
-@page
-@include stdlib/mbtowc.def
-
-@page
-@include stdlib/rand.def
-
-@page
-@include stdlib/rand48.def
-
-@page
-@include stdlib/strtod.def
-
-@page
-@include stdlib/strtol.def
-
-@page
-@include stdlib/strtoul.def
-
-@page
-@include stdlib/system.def
-
-@page
-@include stdlib/wcstombs.def
-
-@page
-@include stdlib/wctomb.def
-
diff --git a/newlib/libc/stdlib/strtod.c b/newlib/libc/stdlib/strtod.c
deleted file mode 100644
index 19467f495..000000000
--- a/newlib/libc/stdlib/strtod.c
+++ /dev/null
@@ -1,731 +0,0 @@
-/*
-FUNCTION
-        <<strtod>>, <<strtof>>---string to double or float
-
-INDEX
-	strtod
-INDEX
-	_strtod_r
-INDEX
-	strtof
-
-ANSI_SYNOPSIS
-        #include <stdlib.h>
-        double strtod(const char *<[str]>, char **<[tail]>);
-        float strtof(const char *<[str]>, char **<[tail]>);
-
-        double _strtod_r(void *<[reent]>, 
-                         const char *<[str]>, char **<[tail]>);
-
-TRAD_SYNOPSIS
-        #include <stdlib.h>
-        double strtod(<[str]>,<[tail]>)
-        char *<[str]>;
-        char **<[tail]>;
-
-        float strtof(<[str]>,<[tail]>)
-        char *<[str]>;
-        char **<[tail]>;
-
-        double _strtod_r(<[reent]>,<[str]>,<[tail]>)
-	char *<[reent]>;
-        char *<[str]>;
-        char **<[tail]>;
-
-DESCRIPTION
-	The function <<strtod>> parses the character string <[str]>,
-	producing a substring which can be converted to a double
-	value.  The substring converted is the longest initial
-	subsequence of <[str]>, beginning with the first
-	non-whitespace character, that has the format:
-	.[+|-]<[digits]>[.][<[digits]>][(e|E)[+|-]<[digits]>] 
-	The substring contains no characters if <[str]> is empty, consists
-	entirely of whitespace, or if the first non-whitespace
-	character is something other than <<+>>, <<->>, <<.>>, or a
-	digit. If the substring is empty, no conversion is done, and
-	the value of <[str]> is stored in <<*<[tail]>>>.  Otherwise,
-	the substring is converted, and a pointer to the final string
-	(which will contain at least the terminating null character of
-	<[str]>) is stored in <<*<[tail]>>>.  If you want no
-	assignment to <<*<[tail]>>>, pass a null pointer as <[tail]>.
-	<<strtof>> is identical to <<strtod>> except for its return type.
-
-	This implementation returns the nearest machine number to the
-	input decimal string.  Ties are broken by using the IEEE
-	round-even rule.
-
-	The alternate function <<_strtod_r>> is a reentrant version.
-	The extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-	<<strtod>> returns the converted substring value, if any.  If
-	no conversion could be performed, 0 is returned.  If the
-	correct value is out of the range of representable values,
-	plus or minus <<HUGE_VAL>> is returned, and <<ERANGE>> is
-	stored in errno. If the correct value would cause underflow, 0
-	is returned and <<ERANGE>> is stored in errno.
-
-Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
-<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
-*/
-
-/****************************************************************
- *
- * The author of this software is David M. Gay.
- *
- * Copyright (c) 1991 by AT&T.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- *
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- ***************************************************************/
-
-/* Please send bug reports to
-	David M. Gay
-	AT&T Bell Laboratories, Room 2C-463
-	600 Mountain Avenue
-	Murray Hill, NJ 07974-2070
-	U.S.A.
-	dmg@research.att.com or research!dmg
- */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <string.h>
-#include "mprec.h"
-
-double
-_DEFUN (_strtod_r, (ptr, s00, se),
-	struct _reent *ptr _AND
-	_CONST char *s00 _AND
-	char **se)
-{
-  int bb2, bb5, bbe, bd2, bd5, bbbits, bs2, c, dsign, e1, esign, i, j,
-    k, nd, nd0, nf, nz, nz0, sign;
-  long e;
-  _CONST char *s, *s0, *s1;
-  double aadj, aadj1, adj;
-  long L;
-  unsigned long z;
-  __ULong y;
-  union double_union rv, rv0;
-
-  _Bigint *bb, *bb1, *bd, *bd0, *bs, *delta;
-  sign = nz0 = nz = 0;
-  rv.d = 0.;
-  for (s = s00;; s++)
-    switch (*s)
-      {
-      case '-':
-	sign = 1;
-	/* no break */
-      case '+':
-	if (*++s)
-	  goto break2;
-	/* no break */
-      case 0:
-	s = s00;
-	goto ret;
-      case '\t':
-      case '\n':
-      case '\v':
-      case '\f':
-      case '\r':
-      case ' ':
-	continue;
-      default:
-	goto break2;
-      }
-break2:
-  if (*s == '0')
-    {
-      nz0 = 1;
-      while (*++s == '0');
-      if (!*s)
-	goto ret;
-    }
-  s0 = s;
-  y = z = 0;
-  for (nd = nf = 0; (c = *s) >= '0' && c <= '9'; nd++, s++)
-    if (nd < 9)
-      y = 10 * y + c - '0';
-    else if (nd < 16)
-      z = 10 * z + c - '0';
-  nd0 = nd;
-  if (c == '.')
-    {
-      c = *++s;
-      if (!nd)
-	{
-	  for (; c == '0'; c = *++s)
-	    nz++;
-	  if (c > '0' && c <= '9')
-	    {
-	      s0 = s;
-	      nf += nz;
-	      nz = 0;
-	      goto have_dig;
-	    }
-	  goto dig_done;
-	}
-      for (; c >= '0' && c <= '9'; c = *++s)
-	{
-	have_dig:
-	  nz++;
-	  if (c -= '0')
-	    {
-	      nf += nz;
-	      for (i = 1; i < nz; i++)
-		if (nd++ < 9)
-		  y *= 10;
-		else if (nd <= DBL_DIG + 1)
-		  z *= 10;
-	      if (nd++ < 9)
-		y = 10 * y + c;
-	      else if (nd <= DBL_DIG + 1)
-		z = 10 * z + c;
-	      nz = 0;
-	    }
-	}
-    }
-dig_done:
-  e = 0;
-  if (c == 'e' || c == 'E')
-    {
-      if (!nd && !nz && !nz0)
-	{
-	  s = s00;
-	  goto ret;
-	}
-      s00 = s;
-      esign = 0;
-      switch (c = *++s)
-	{
-	case '-':
-	  esign = 1;
-	case '+':
-	  c = *++s;
-	}
-      if (c >= '0' && c <= '9')
-	{
-	  while (c == '0')
-	    c = *++s;
-	  if (c > '0' && c <= '9')
-	    {
-	      e = c - '0';
-	      s1 = s;
-	      while ((c = *++s) >= '0' && c <= '9')
-		e = 10 * e + c - '0';
-	      if (s - s1 > 8)
-		/* Avoid confusion from exponents
-		 * so large that e might overflow.
-		 */
-		e = 9999999L;
-	      if (esign)
-		e = -e;
-	    }
-	  else
-	    e = 0;
-	}
-      else
-	s = s00;
-    }
-  if (!nd)
-    {
-      if (!nz && !nz0)
-	s = s00;
-      goto ret;
-    }
-  e1 = e -= nf;
-
-  /* Now we have nd0 digits, starting at s0, followed by a
-   * decimal point, followed by nd-nd0 digits.  The number we're
-   * after is the integer represented by those digits times
-   * 10**e */
-
-  if (!nd0)
-    nd0 = nd;
-  k = nd < DBL_DIG + 1 ? nd : DBL_DIG + 1;
-  rv.d = y;
-  if (k > 9)
-    rv.d = tens[k - 9] * rv.d + z;
-  bd0 = 0;
-  if (nd <= DBL_DIG
-#ifndef RND_PRODQUOT
-      && FLT_ROUNDS == 1
-#endif
-    )
-    {
-      if (!e)
-	goto ret;
-      if (e > 0)
-	{
-	  if (e <= Ten_pmax)
-	    {
-#ifdef VAX
-	      goto vax_ovfl_check;
-#else
-	      /* rv.d = */ rounded_product (rv.d, tens[e]);
-	      goto ret;
-#endif
-	    }
-	  i = DBL_DIG - nd;
-	  if (e <= Ten_pmax + i)
-	    {
-	      /* A fancier test would sometimes let us do
-				 * this for larger i values.
-				 */
-	      e -= i;
-	      rv.d *= tens[i];
-#ifdef VAX
-	      /* VAX exponent range is so narrow we must
-	       * worry about overflow here...
-	       */
-	    vax_ovfl_check:
-	      word0 (rv) -= P * Exp_msk1;
-	      /* rv.d = */ rounded_product (rv.d, tens[e]);
-	      if ((word0 (rv) & Exp_mask)
-		  > Exp_msk1 * (DBL_MAX_EXP + Bias - 1 - P))
-		goto ovfl;
-	      word0 (rv) += P * Exp_msk1;
-#else
-	      /* rv.d = */ rounded_product (rv.d, tens[e]);
-#endif
-	      goto ret;
-	    }
-	}
-#ifndef Inaccurate_Divide
-      else if (e >= -Ten_pmax)
-	{
-	  /* rv.d = */ rounded_quotient (rv.d, tens[-e]);
-	  goto ret;
-	}
-#endif
-    }
-  e1 += nd - k;
-
-  /* Get starting approximation = rv.d * 10**e1 */
-
-  if (e1 > 0)
-    {
-      if ((i = e1 & 15) != 0)
-	rv.d *= tens[i];
-      if (e1 &= ~15)
-	{
-	  if (e1 > DBL_MAX_10_EXP)
-	    {
-	    ovfl:
-	      ptr->_errno = ERANGE;
-#ifdef _HAVE_STDC
-	      rv.d = HUGE_VAL;
-#else
-	      /* Can't trust HUGE_VAL */
-#ifdef IEEE_Arith
-	      word0 (rv) = Exp_mask;
-#ifndef _DOUBLE_IS_32BITS
-	      word1 (rv) = 0;
-#endif
-#else
-	      word0 (rv) = Big0;
-#ifndef _DOUBLE_IS_32BITS
-	      word1 (rv) = Big1;
-#endif
-#endif
-#endif
-	      if (bd0)
-		goto retfree;
-	      goto ret;
-	    }
-	  if (e1 >>= 4)
-	    {
-	      for (j = 0; e1 > 1; j++, e1 >>= 1)
-		if (e1 & 1)
-		  rv.d *= bigtens[j];
-	      /* The last multiplication could overflow. */
-	      word0 (rv) -= P * Exp_msk1;
-	      rv.d *= bigtens[j];
-	      if ((z = word0 (rv) & Exp_mask)
-		  > Exp_msk1 * (DBL_MAX_EXP + Bias - P))
-		goto ovfl;
-	      if (z > Exp_msk1 * (DBL_MAX_EXP + Bias - 1 - P))
-		{
-		  /* set to largest number */
-		  /* (Can't trust DBL_MAX) */
-		  word0 (rv) = Big0;
-#ifndef _DOUBLE_IS_32BITS
-		  word1 (rv) = Big1;
-#endif
-		}
-	      else
-		word0 (rv) += P * Exp_msk1;
-	    }
-
-	}
-    }
-  else if (e1 < 0)
-    {
-      e1 = -e1;
-      if ((i = e1 & 15) != 0)
-	rv.d /= tens[i];
-      if (e1 &= ~15)
-	{
-	  e1 >>= 4;
-	  if (e1 >= 1 << n_bigtens)
-            goto undfl;
-	  for (j = 0; e1 > 1; j++, e1 >>= 1)
-	    if (e1 & 1)
-	      rv.d *= tinytens[j];
-	  /* The last multiplication could underflow. */
-	  rv0.d = rv.d;
-	  rv.d *= tinytens[j];
-	  if (!rv.d)
-	    {
-	      rv.d = 2. * rv0.d;
-	      rv.d *= tinytens[j];
-	      if (!rv.d)
-		{
-		undfl:
-		  rv.d = 0.;
-		  ptr->_errno = ERANGE;
-		  if (bd0)
-		    goto retfree;
-		  goto ret;
-		}
-#ifndef _DOUBLE_IS_32BITS
-	      word0 (rv) = Tiny0;
-	      word1 (rv) = Tiny1;
-#else
-	      word0 (rv) = Tiny1;
-#endif
-	      /* The refinement below will clean
-	       * this approximation up.
-	       */
-	    }
-	}
-    }
-
-  /* Now the hard part -- adjusting rv to the correct value.*/
-
-  /* Put digits into bd: true value = bd * 10^e */
-
-  bd0 = s2b (ptr, s0, nd0, nd, y);
-
-  for (;;)
-    {
-      bd = Balloc (ptr, bd0->_k);
-      Bcopy (bd, bd0);
-      bb = d2b (ptr, rv.d, &bbe, &bbbits);	/* rv.d = bb * 2^bbe */
-      bs = i2b (ptr, 1);
-
-      if (e >= 0)
-	{
-	  bb2 = bb5 = 0;
-	  bd2 = bd5 = e;
-	}
-      else
-	{
-	  bb2 = bb5 = -e;
-	  bd2 = bd5 = 0;
-	}
-      if (bbe >= 0)
-	bb2 += bbe;
-      else
-	bd2 -= bbe;
-      bs2 = bb2;
-#ifdef Sudden_Underflow
-#ifdef IBM
-      j = 1 + 4 * P - 3 - bbbits + ((bbe + bbbits - 1) & 3);
-#else
-      j = P + 1 - bbbits;
-#endif
-#else
-      i = bbe + bbbits - 1;	/* logb(rv.d) */
-      if (i < Emin)		/* denormal */
-	j = bbe + (P - Emin);
-      else
-	j = P + 1 - bbbits;
-#endif
-      bb2 += j;
-      bd2 += j;
-      i = bb2 < bd2 ? bb2 : bd2;
-      if (i > bs2)
-	i = bs2;
-      if (i > 0)
-	{
-	  bb2 -= i;
-	  bd2 -= i;
-	  bs2 -= i;
-	}
-      if (bb5 > 0)
-	{
-	  bs = pow5mult (ptr, bs, bb5);
-	  bb1 = mult (ptr, bs, bb);
-	  Bfree (ptr, bb);
-	  bb = bb1;
-	}
-      if (bb2 > 0)
-	bb = lshift (ptr, bb, bb2);
-      if (bd5 > 0)
-	bd = pow5mult (ptr, bd, bd5);
-      if (bd2 > 0)
-	bd = lshift (ptr, bd, bd2);
-      if (bs2 > 0)
-	bs = lshift (ptr, bs, bs2);
-      delta = diff (ptr, bb, bd);
-      dsign = delta->_sign;
-      delta->_sign = 0;
-      i = cmp (delta, bs);
-      if (i < 0)
-	{
-	  /* Error is less than half an ulp -- check for
-	   * special case of mantissa a power of two.
-	   */
-	  if (dsign || word1 (rv) || word0 (rv) & Bndry_mask)
-	    break;
-	  delta = lshift (ptr, delta, Log2P);
-	  if (cmp (delta, bs) > 0)
-	    goto drop_down;
-	  break;
-	}
-      if (i == 0)
-	{
-	  /* exactly half-way between */
-	  if (dsign)
-	    {
-	      if ((word0 (rv) & Bndry_mask1) == Bndry_mask1
-		  && word1 (rv) == 0xffffffff)
-		{
-		  /*boundary case -- increment exponent*/
-		  word0 (rv) = (word0 (rv) & Exp_mask)
-		    + Exp_msk1
-#ifdef IBM
-		    | Exp_msk1 >> 4
-#endif
-		    ;
-#ifndef _DOUBLE_IS_32BITS
-		  word1 (rv) = 0;
-#endif
-		  break;
-		}
-	    }
-	  else if (!(word0 (rv) & Bndry_mask) && !word1 (rv))
-	    {
-	    drop_down:
-	      /* boundary case -- decrement exponent */
-#ifdef Sudden_Underflow
-	      L = word0 (rv) & Exp_mask;
-#ifdef IBM
-	      if (L < Exp_msk1)
-#else
-	      if (L <= Exp_msk1)
-#endif
-		goto undfl;
-	      L -= Exp_msk1;
-#else
-	      L = (word0 (rv) & Exp_mask) - Exp_msk1;
-#endif
-	      word0 (rv) = L | Bndry_mask1;
-#ifndef _DOUBLE_IS_32BITS
-	      word1 (rv) = 0xffffffff;
-#endif
-#ifdef IBM
-	      goto cont;
-#else
-	      break;
-#endif
-	    }
-#ifndef ROUND_BIASED
-	  if (!(word1 (rv) & LSB))
-	    break;
-#endif
-	  if (dsign)
-	    rv.d += ulp (rv.d);
-#ifndef ROUND_BIASED
-	  else
-	    {
-	      rv.d -= ulp (rv.d);
-#ifndef Sudden_Underflow
-	      if (!rv.d)
-		goto undfl;
-#endif
-	    }
-#endif
-	  break;
-	}
-      if ((aadj = ratio (delta, bs)) <= 2.)
-	{
-	  if (dsign)
-	    aadj = aadj1 = 1.;
-	  else if (word1 (rv) || word0 (rv) & Bndry_mask)
-	    {
-#ifndef Sudden_Underflow
-	      if (word1 (rv) == Tiny1 && !word0 (rv))
-		goto undfl;
-#endif
-	      aadj = 1.;
-	      aadj1 = -1.;
-	    }
-	  else
-	    {
-	      /* special case -- power of FLT_RADIX to be */
-	      /* rounded down... */
-
-	      if (aadj < 2. / FLT_RADIX)
-		aadj = 1. / FLT_RADIX;
-	      else
-		aadj *= 0.5;
-	      aadj1 = -aadj;
-	    }
-	}
-      else
-	{
-	  aadj *= 0.5;
-	  aadj1 = dsign ? aadj : -aadj;
-#ifdef Check_FLT_ROUNDS
-	  switch (FLT_ROUNDS)
-	    {
-	    case 2:		/* towards +infinity */
-	      aadj1 -= 0.5;
-	      break;
-	    case 0:		/* towards 0 */
-	    case 3:		/* towards -infinity */
-	      aadj1 += 0.5;
-	    }
-#else
-	  if (FLT_ROUNDS == 0)
-	    aadj1 += 0.5;
-#endif
-	}
-      y = word0 (rv) & Exp_mask;
-
-      /* Check for overflow */
-
-      if (y == Exp_msk1 * (DBL_MAX_EXP + Bias - 1))
-	{
-	  rv0.d = rv.d;
-	  word0 (rv) -= P * Exp_msk1;
-	  adj = aadj1 * ulp (rv.d);
-	  rv.d += adj;
-	  if ((word0 (rv) & Exp_mask) >=
-	      Exp_msk1 * (DBL_MAX_EXP + Bias - P))
-	    {
-	      if (word0 (rv0) == Big0 && word1 (rv0) == Big1)
-		goto ovfl;
-#ifdef _DOUBLE_IS_32BITS
-	      word0 (rv) = Big1;
-#else
-	      word0 (rv) = Big0;
-	      word1 (rv) = Big1;
-#endif
-	      goto cont;
-	    }
-	  else
-	    word0 (rv) += P * Exp_msk1;
-	}
-      else
-	{
-#ifdef Sudden_Underflow
-	  if ((word0 (rv) & Exp_mask) <= P * Exp_msk1)
-	    {
-	      rv0.d = rv.d;
-	      word0 (rv) += P * Exp_msk1;
-	      adj = aadj1 * ulp (rv.d);
-	      rv.d += adj;
-#ifdef IBM
-	      if ((word0 (rv) & Exp_mask) < P * Exp_msk1)
-#else
-	      if ((word0 (rv) & Exp_mask) <= P * Exp_msk1)
-#endif
-		{
-		  if (word0 (rv0) == Tiny0
-		      && word1 (rv0) == Tiny1)
-		    goto undfl;
-		  word0 (rv) = Tiny0;
-		  word1 (rv) = Tiny1;
-		  goto cont;
-		}
-	      else
-		word0 (rv) -= P * Exp_msk1;
-	    }
-	  else
-	    {
-	      adj = aadj1 * ulp (rv.d);
-	      rv.d += adj;
-	    }
-#else
-	  /* Compute adj so that the IEEE rounding rules will
-	   * correctly round rv.d + adj in some half-way cases.
-	   * If rv.d * ulp(rv.d) is denormalized (i.e.,
-	   * y <= (P-1)*Exp_msk1), we must adjust aadj to avoid
-	   * trouble from bits lost to denormalization;
-	   * example: 1.2e-307 .
-	   */
-	  if (y <= (P - 1) * Exp_msk1 && aadj >= 1.)
-	    {
-	      aadj1 = (double) (int) (aadj + 0.5);
-	      if (!dsign)
-		aadj1 = -aadj1;
-	    }
-	  adj = aadj1 * ulp (rv.d);
-	  rv.d += adj;
-#endif
-	}
-      z = word0 (rv) & Exp_mask;
-      if (y == z)
-	{
-	  /* Can we stop now? */
-	  L = aadj;
-	  aadj -= L;
-	  /* The tolerances below are conservative. */
-	  if (dsign || word1 (rv) || word0 (rv) & Bndry_mask)
-	    {
-	      if (aadj < .4999999 || aadj > .5000001)
-		break;
-	    }
-	  else if (aadj < .4999999 / FLT_RADIX)
-	    break;
-	}
-    cont:
-      Bfree (ptr, bb);
-      Bfree (ptr, bd);
-      Bfree (ptr, bs);
-      Bfree (ptr, delta);
-    }
-retfree:
-  Bfree (ptr, bb);
-  Bfree (ptr, bd);
-  Bfree (ptr, bs);
-  Bfree (ptr, bd0);
-  Bfree (ptr, delta);
-ret:
-  if (se)
-    *se = (char *) s;
-  return sign ? -rv.d : rv.d;
-}
-
-#ifndef NO_REENT
-
-double
-_DEFUN (strtod, (s00, se),
-	_CONST char *s00 _AND char **se)
-{
-  return _strtod_r (_REENT, s00, se);
-}
-
-float
-_DEFUN (strtof, (s00, se),
-	_CONST char *s00 _AND
-	char **se)
-{
-  return (float)_strtod_r (_REENT, s00, se);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/strtol.c b/newlib/libc/stdlib/strtol.c
deleted file mode 100644
index 4c07e6171..000000000
--- a/newlib/libc/stdlib/strtol.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
-FUNCTION
-   <<strtol>>---string to long
-
-INDEX
-	strtol
-INDEX
-	_strtol_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        long strtol(const char *<[s]>, char **<[ptr]>,int <[base]>);
-
-        long _strtol_r(void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>,int <[base]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	long strtol (<[s]>, <[ptr]>, <[base]>)
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-	long _strtol_r (<[reent]>, <[s]>, <[ptr]>, <[base]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-DESCRIPTION
-The function <<strtol>> converts the string <<*<[s]>>> to
-a <<long>>. First, it breaks down the string into three parts:
-leading whitespace, which is ignored; a subject string consisting
-of characters resembling an integer in the radix specified by <[base]>;
-and a trailing portion consisting of zero or more unparseable characters,
-and always including the terminating null character. Then, it attempts
-to convert the subject string into a <<long>> and returns the
-result.
-
-If the value of <[base]> is 0, the subject string is expected to look
-like a normal C integer constant: an optional sign, a possible `<<0x>>'
-indicating a hexadecimal base, and a number. If <[base]> is between
-2 and 36, the expected form of the subject is a sequence of letters
-and digits representing an integer in the radix specified by <[base]>,
-with an optional plus or minus sign. The letters <<a>>--<<z>> (or,
-equivalently, <<A>>--<<Z>>) are used to signify values from 10 to 35;
-only letters whose ascribed values are less than <[base]> are
-permitted. If <[base]> is 16, a leading <<0x>> is permitted.
-
-The subject sequence is the longest initial sequence of the input
-string that has the expected form, starting with the first
-non-whitespace character.  If the string is empty or consists entirely
-of whitespace, or if the first non-whitespace character is not a
-permissible letter or digit, the subject string is empty.
-
-If the subject string is acceptable, and the value of <[base]> is zero,
-<<strtol>> attempts to determine the radix from the input string. A
-string with a leading <<0x>> is treated as a hexadecimal value; a string with
-a leading 0 and no <<x>> is treated as octal; all other strings are
-treated as decimal. If <[base]> is between 2 and 36, it is used as the
-conversion radix, as described above. If the subject string begins with
-a minus sign, the value is negated. Finally, a pointer to the first
-character past the converted subject string is stored in <[ptr]>, if
-<[ptr]> is not <<NULL>>.
-
-If the subject string is empty (or not in acceptable form), no conversion
-is performed and the value of <[s]> is stored in <[ptr]> (if <[ptr]> is
-not <<NULL>>).
-
-The alternate function <<_strtol_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<strtol>> returns the converted value, if any. If no conversion was
-made, 0 is returned.
-
-<<strtol>> returns <<LONG_MAX>> or <<LONG_MIN>> if the magnitude of
-the converted value is too large, and sets <<errno>> to <<ERANGE>>.
-
-PORTABILITY
-<<strtol>> is ANSI.
-
-No supporting OS subroutines are required.
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Convert a string to a long integer.
- *
- * Ignores `locale' stuff.  Assumes that the upper and lower case
- * alphabets and digits are each contiguous.
- */
-long
-_DEFUN (_strtol_r, (rptr, nptr, endptr, base),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr _AND
-	int base)
-{
-	register const char *s = nptr;
-	register unsigned long acc;
-	register int c;
-	register unsigned long cutoff;
-	register int neg = 0, any, cutlim;
-
-	/*
-	 * Skip white space and pick up leading +/- sign if any.
-	 * If base is 0, allow 0x for hex and 0 for octal, else
-	 * assume decimal; if base is already 16, allow 0x.
-	 */
-	do {
-		c = *s++;
-	} while (isspace(c));
-	if (c == '-') {
-		neg = 1;
-		c = *s++;
-	} else if (c == '+')
-		c = *s++;
-	if ((base == 0 || base == 16) &&
-	    c == '0' && (*s == 'x' || *s == 'X')) {
-		c = s[1];
-		s += 2;
-		base = 16;
-	}
-	if (base == 0)
-		base = c == '0' ? 8 : 10;
-
-	/*
-	 * Compute the cutoff value between legal numbers and illegal
-	 * numbers.  That is the largest legal value, divided by the
-	 * base.  An input number that is greater than this value, if
-	 * followed by a legal input character, is too big.  One that
-	 * is equal to this value may be valid or not; the limit
-	 * between valid and invalid numbers is then based on the last
-	 * digit.  For instance, if the range for longs is
-	 * [-2147483648..2147483647] and the input base is 10,
-	 * cutoff will be set to 214748364 and cutlim to either
-	 * 7 (neg==0) or 8 (neg==1), meaning that if we have accumulated
-	 * a value > 214748364, or equal but the next digit is > 7 (or 8),
-	 * the number is too big, and we will return a range error.
-	 *
-	 * Set any if any `digits' consumed; make it negative to indicate
-	 * overflow.
-	 */
-	cutoff = neg ? -(unsigned long)LONG_MIN : LONG_MAX;
-	cutlim = cutoff % (unsigned long)base;
-	cutoff /= (unsigned long)base;
-	for (acc = 0, any = 0;; c = *s++) {
-		if (isdigit(c))
-			c -= '0';
-		else if (isalpha(c))
-			c -= isupper(c) ? 'A' - 10 : 'a' - 10;
-		else
-			break;
-		if (c >= base)
-			break;
-               if (any < 0 || acc > cutoff || (acc == cutoff && c > cutlim))
-			any = -1;
-		else {
-			any = 1;
-			acc *= base;
-			acc += c;
-		}
-	}
-	if (any < 0) {
-		acc = neg ? LONG_MIN : LONG_MAX;
-		rptr->_errno = ERANGE;
-	} else if (neg)
-		acc = -acc;
-	if (endptr != 0)
-		*endptr = (char *) (any ? s - 1 : nptr);
-	return (acc);
-}
-
-#ifndef _REENT_ONLY
-
-long
-_DEFUN (strtol, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr _AND
-	int base)
-{
-	return _strtol_r (_REENT, s, ptr, base);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/strtoll.c b/newlib/libc/stdlib/strtoll.c
deleted file mode 100644
index 3ee9e7592..000000000
--- a/newlib/libc/stdlib/strtoll.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-FUNCTION
-   <<strtoll>>---string to long long
-
-INDEX
-	strtoll
-INDEX
-	_strtoll_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        long long strtoll(const char *<[s]>, char **<[ptr]>,int <[base]>);
-
-        long long _strtoll_r(void *<[reent]>, 
-                       const char *<[s]>, char **<[ptr]>,int <[base]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	long long strtoll (<[s]>, <[ptr]>, <[base]>)
-        const char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-	long long _strtoll_r (<[reent]>, <[s]>, <[ptr]>, <[base]>)
-	char *<[reent]>;
-        const char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-DESCRIPTION
-The function <<strtoll>> converts the string <<*<[s]>>> to
-a <<long long>>. First, it breaks down the string into three parts:
-leading whitespace, which is ignored; a subject string consisting
-of characters resembling an integer in the radix specified by <[base]>;
-and a trailing portion consisting of zero or more unparseable characters,
-and always including the terminating null character. Then, it attempts
-to convert the subject string into a <<long long>> and returns the
-result.
-
-If the value of <[base]> is 0, the subject string is expected to look
-like a normal C integer constant: an optional sign, a possible `<<0x>>'
-indicating a hexadecimal base, and a number. If <[base]> is between
-2 and 36, the expected form of the subject is a sequence of letters
-and digits representing an integer in the radix specified by <[base]>,
-with an optional plus or minus sign. The letters <<a>>--<<z>> (or,
-equivalently, <<A>>--<<Z>>) are used to signify values from 10 to 35;
-only letters whose ascribed values are less than <[base]> are
-permitted. If <[base]> is 16, a leading <<0x>> is permitted.
-
-The subject sequence is the longest initial sequence of the input
-string that has the expected form, starting with the first
-non-whitespace character.  If the string is empty or consists entirely
-of whitespace, or if the first non-whitespace character is not a
-permissible letter or digit, the subject string is empty.
-
-If the subject string is acceptable, and the value of <[base]> is zero,
-<<strtoll>> attempts to determine the radix from the input string. A
-string with a leading <<0x>> is treated as a hexadecimal value; a string with
-a leading 0 and no <<x>> is treated as octal; all other strings are
-treated as decimal. If <[base]> is between 2 and 36, it is used as the
-conversion radix, as described above. If the subject string begins with
-a minus sign, the value is negated. Finally, a pointer to the first
-character past the converted subject string is stored in <[ptr]>, if
-<[ptr]> is not <<NULL>>.
-
-If the subject string is empty (or not in acceptable form), no conversion
-is performed and the value of <[s]> is stored in <[ptr]> (if <[ptr]> is
-not <<NULL>>).
-
-The alternate function <<_strtoll_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<strtoll>> returns the converted value, if any. If no conversion was
-made, 0 is returned.
-
-<<strtoll>> returns <<LONG_LONG_MAX>> or <<LONG_LONG_MIN>> if the magnitude of
-the converted value is too large, and sets <<errno>> to <<ERANGE>>.
-
-PORTABILITY
-<<strtoll>> is nonstandard.
-
-No supporting OS subroutines are required.
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-long long
-_DEFUN (strtoll, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr _AND
-	int base)
-{
-	return _strtoll_r (_REENT, s, ptr, base);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/strtoll_r.c b/newlib/libc/stdlib/strtoll_r.c
deleted file mode 100644
index b814f68be..000000000
--- a/newlib/libc/stdlib/strtoll_r.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
-  This code is based on strtoul.c which has the following copyright.
-  It is used to convert a string into a signed long long.
-
-  long long _strtoll_r (struct _reent *rptr, const char *s, 
-                        char **ptr, int base);
-*/
-
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifdef __GNUC__
-
-#define _GNU_SOURCE
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Convert a string to a long long integer.
- *
- * Ignores `locale' stuff.  Assumes that the upper and lower case
- * alphabets and digits are each contiguous.
- */
-long long
-_DEFUN (_strtoll_r, (rptr, nptr, endptr, base),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr _AND
-	int base)
-{
-	register const char *s = nptr;
-	register unsigned long long acc;
-	register int c;
-	register unsigned long long cutoff;
-	register int neg = 0, any, cutlim;
-
-	/*
-	 * Skip white space and pick up leading +/- sign if any.
-	 * If base is 0, allow 0x for hex and 0 for octal, else
-	 * assume decimal; if base is already 16, allow 0x.
-	 */
-	do {
-		c = *s++;
-	} while (isspace(c));
-	if (c == '-') {
-		neg = 1;
-		c = *s++;
-	} else if (c == '+')
-		c = *s++;
-	if ((base == 0 || base == 16) &&
-	    c == '0' && (*s == 'x' || *s == 'X')) {
-		c = s[1];
-		s += 2;
-		base = 16;
-	}
-	if (base == 0)
-		base = c == '0' ? 8 : 10;
-
-	/*
-	 * Compute the cutoff value between legal numbers and illegal
-	 * numbers.  That is the largest legal value, divided by the
-	 * base.  An input number that is greater than this value, if
-	 * followed by a legal input character, is too big.  One that
-	 * is equal to this value may be valid or not; the limit
-	 * between valid and invalid numbers is then based on the last
-	 * digit.  For instance, if the range for longs is
-	 * [-2147483648..2147483647] and the input base is 10,
-	 * cutoff will be set to 214748364 and cutlim to either
-	 * 7 (neg==0) or 8 (neg==1), meaning that if we have accumulated
-	 * a value > 214748364, or equal but the next digit is > 7 (or 8),
-	 * the number is too big, and we will return a range error.
-	 *
-	 * Set any if any `digits' consumed; make it negative to indicate
-	 * overflow.
-	 */
-	cutoff = neg ? -(unsigned long long)LONG_LONG_MIN : LONG_LONG_MAX;
-	cutlim = cutoff % (unsigned long long)base;
-	cutoff /= (unsigned long long)base;
-	for (acc = 0, any = 0;; c = *s++) {
-		if (isdigit(c))
-			c -= '0';
-		else if (isalpha(c))
-			c -= isupper(c) ? 'A' - 10 : 'a' - 10;
-		else
-			break;
-		if (c >= base)
-			break;
-               if (any < 0 || acc > cutoff || (acc == cutoff && c > cutlim))
-			any = -1;
-		else {
-			any = 1;
-			acc *= base;
-			acc += c;
-		}
-	}
-	if (any < 0) {
-		acc = neg ? LONG_LONG_MIN : LONG_LONG_MAX;
-		rptr->_errno = ERANGE;
-	} else if (neg)
-		acc = -acc;
-	if (endptr != 0)
-		*endptr = (char *) (any ? s - 1 : nptr);
-	return (acc);
-}
-
-#endif /* __GNUC__ */
diff --git a/newlib/libc/stdlib/strtoul.c b/newlib/libc/stdlib/strtoul.c
deleted file mode 100644
index a3ac09d8e..000000000
--- a/newlib/libc/stdlib/strtoul.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
-FUNCTION
-	<<strtoul>>---string to unsigned long
-
-INDEX
-	strtoul
-INDEX
-	_strtoul_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        unsigned long strtoul(const char *<[s]>, char **<[ptr]>,
-                              int <[base]>);
-
-        unsigned long _strtoul_r(void *<[reent]>, const char *<[s]>,
-                              char **<[ptr]>, int <[base]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-        unsigned long strtoul(<[s]>, <[ptr]>, <[base]>)
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-        unsigned long _strtoul_r(<[reent]>, <[s]>, <[ptr]>, <[base]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-DESCRIPTION
-The function <<strtoul>> converts the string <<*<[s]>>> to
-an <<unsigned long>>. First, it breaks down the string into three parts:
-leading whitespace, which is ignored; a subject string consisting
-of the digits meaningful in the radix specified by <[base]>
-(for example, <<0>> through <<7>> if the value of <[base]> is 8);
-and a trailing portion consisting of one or more unparseable characters,
-which always includes the terminating null character. Then, it attempts
-to convert the subject string into an unsigned long integer, and returns the
-result.
-
-If the value of <[base]> is zero, the subject string is expected to look
-like a normal C integer constant (save that no optional sign is permitted):
-a possible <<0x>> indicating hexadecimal radix, and a number.
-If <[base]> is between 2 and 36, the expected form of the subject is a
-sequence of digits (which may include letters, depending on the
-base) representing an integer in the radix specified by <[base]>.
-The letters <<a>>--<<z>> (or <<A>>--<<Z>>) are used as digits valued from
-10 to 35. If <[base]> is 16, a leading <<0x>> is permitted.
-
-The subject sequence is the longest initial sequence of the input
-string that has the expected form, starting with the first
-non-whitespace character.  If the string is empty or consists entirely
-of whitespace, or if the first non-whitespace character is not a
-permissible digit, the subject string is empty.
-
-If the subject string is acceptable, and the value of <[base]> is zero,
-<<strtoul>> attempts to determine the radix from the input string. A
-string with a leading <<0x>> is treated as a hexadecimal value; a string with
-a leading <<0>> and no <<x>> is treated as octal; all other strings are
-treated as decimal. If <[base]> is between 2 and 36, it is used as the
-conversion radix, as described above. Finally, a pointer to the first
-character past the converted subject string is stored in <[ptr]>, if
-<[ptr]> is not <<NULL>>.
-
-If the subject string is empty (that is, if <<*>><[s]> does not start
-with a substring in acceptable form), no conversion
-is performed and the value of <[s]> is stored in <[ptr]> (if <[ptr]> is
-not <<NULL>>).
-
-The alternate function <<_strtoul_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-<<strtoul>> returns the converted value, if any. If no conversion was
-made, <<0>> is returned.
-
-<<strtoul>> returns <<ULONG_MAX>> if the magnitude of the converted
-value is too large, and sets <<errno>> to <<ERANGE>>.
-
-PORTABILITY
-<<strtoul>> is ANSI.
-
-<<strtoul>> requires no supporting OS subroutines.
-*/
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Convert a string to an unsigned long integer.
- *
- * Ignores `locale' stuff.  Assumes that the upper and lower case
- * alphabets and digits are each contiguous.
- */
-unsigned long
-_DEFUN (_strtoul_r, (rptr, nptr, endptr, base),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr _AND
-	int base)
-{
-	register const char *s = nptr;
-	register unsigned long acc;
-	register int c;
-	register unsigned long cutoff;
-	register int neg = 0, any, cutlim;
-
-	/*
-	 * See strtol for comments as to the logic used.
-	 */
-	do {
-		c = *s++;
-	} while (isspace(c));
-	if (c == '-') {
-		neg = 1;
-		c = *s++;
-	} else if (c == '+')
-		c = *s++;
-	if ((base == 0 || base == 16) &&
-	    c == '0' && (*s == 'x' || *s == 'X')) {
-		c = s[1];
-		s += 2;
-		base = 16;
-	}
-	if (base == 0)
-		base = c == '0' ? 8 : 10;
-	cutoff = (unsigned long)ULONG_MAX / (unsigned long)base;
-	cutlim = (unsigned long)ULONG_MAX % (unsigned long)base;
-	for (acc = 0, any = 0;; c = *s++) {
-		if (isdigit(c))
-			c -= '0';
-		else if (isalpha(c))
-			c -= isupper(c) ? 'A' - 10 : 'a' - 10;
-		else
-			break;
-		if (c >= base)
-			break;
-               if (any < 0 || acc > cutoff || (acc == cutoff && c > cutlim))
-			any = -1;
-		else {
-			any = 1;
-			acc *= base;
-			acc += c;
-		}
-	}
-	if (any < 0) {
-		acc = ULONG_MAX;
-		rptr->_errno = ERANGE;
-	} else if (neg)
-		acc = -acc;
-	if (endptr != 0)
-		*endptr = (char *) (any ? s - 1 : nptr);
-	return (acc);
-}
-
-#ifndef _REENT_ONLY
-
-unsigned long
-_DEFUN (strtoul, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr _AND
-	int base)
-{
-	return _strtoul_r (_REENT, s, ptr, base);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/strtoull.c b/newlib/libc/stdlib/strtoull.c
deleted file mode 100644
index f7ab963a0..000000000
--- a/newlib/libc/stdlib/strtoull.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
-FUNCTION
-	<<strtoull>>---string to unsigned long long
-
-INDEX
-	strtoull
-INDEX
-	_strtoull_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-        unsigned long long strtoull(const char *<[s]>, char **<[ptr]>,
-                              int <[base]>);
-
-        unsigned long long _strtoull_r(void *<[reent]>, const char *<[s]>,
-                              char **<[ptr]>, int <[base]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-        unsigned long long strtoull(<[s]>, <[ptr]>, <[base]>)
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-        unsigned long long _strtoull_r(<[reent]>, <[s]>, <[ptr]>, <[base]>)
-	char *<[reent]>;
-        char *<[s]>;
-        char **<[ptr]>;
-        int <[base]>;
-
-DESCRIPTION
-The function <<strtoull>> converts the string <<*<[s]>>> to
-an <<unsigned long long>>. First, it breaks down the string into three parts:
-leading whitespace, which is ignored; a subject string consisting
-of the digits meaningful in the radix specified by <[base]>
-(for example, <<0>> through <<7>> if the value of <[base]> is 8);
-and a trailing portion consisting of one or more unparseable characters,
-which always includes the terminating null character. Then, it attempts
-to convert the subject string into an unsigned long long integer, and returns the
-result.
-
-If the value of <[base]> is zero, the subject string is expected to look
-like a normal C integer constant (save that no optional sign is permitted):
-a possible <<0x>> indicating hexadecimal radix, and a number.
-If <[base]> is between 2 and 36, the expected form of the subject is a
-sequence of digits (which may include letters, depending on the
-base) representing an integer in the radix specified by <[base]>.
-The letters <<a>>--<<z>> (or <<A>>--<<Z>>) are used as digits valued from
-10 to 35. If <[base]> is 16, a leading <<0x>> is permitted.
-
-The subject sequence is the longest initial sequence of the input
-string that has the expected form, starting with the first
-non-whitespace character.  If the string is empty or consists entirely
-of whitespace, or if the first non-whitespace character is not a
-permissible digit, the subject string is empty.
-
-If the subject string is acceptable, and the value of <[base]> is zero,
-<<strtoull>> attempts to determine the radix from the input string. A
-string with a leading <<0x>> is treated as a hexadecimal value; a string with
-a leading <<0>> and no <<x>> is treated as octal; all other strings are
-treated as decimal. If <[base]> is between 2 and 36, it is used as the
-conversion radix, as described above. Finally, a pointer to the first
-character past the converted subject string is stored in <[ptr]>, if
-<[ptr]> is not <<NULL>>.
-
-If the subject string is empty (that is, if <<*>><[s]> does not start
-with a substring in acceptable form), no conversion
-is performed and the value of <[s]> is stored in <[ptr]> (if <[ptr]> is
-not <<NULL>>).
-
-The alternate function <<_strtoull_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-
-RETURNS
-<<strtoull>> returns the converted value, if any. If no conversion was
-made, <<0>> is returned.
-
-<<strtoull>> returns <<ULONG_LONG_MAX>> if the magnitude of the converted
-value is too large, and sets <<errno>> to <<ERANGE>>.
-
-PORTABILITY
-<<strtoull>> is nonstandard.
-
-<<strtoull>> requires no supporting OS subroutines.
-*/
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-unsigned long long
-_DEFUN (strtoull, (s, ptr, base),
-	_CONST char *s _AND
-	char **ptr _AND
-	int base)
-{
-	return _strtoull_r (_REENT, s, ptr, base);
-}
-
-#endif
diff --git a/newlib/libc/stdlib/strtoull_r.c b/newlib/libc/stdlib/strtoull_r.c
deleted file mode 100644
index d8a86b3f4..000000000
--- a/newlib/libc/stdlib/strtoull_r.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
-  This code is based on strtoul.c which has the following copyright.
-  It is used to convert a string into an unsigned long long.
-  
-  long long _strtoull_r (struct _reent *rptr, const char *s,
-                        char **ptr, int base);
-
-*/
-
-/*
- * Copyright (c) 1990 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifdef __GNUC__
-
-#define _GNU_SOURCE
-#include <_ansi.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <reent.h>
-
-/*
- * Convert a string to an unsigned long long integer.
- *
- * Ignores `locale' stuff.  Assumes that the upper and lower case
- * alphabets and digits are each contiguous.
- */
-unsigned long long
-_DEFUN (_strtoull_r, (rptr, nptr, endptr, base),
-	struct _reent *rptr _AND
-	_CONST char *nptr _AND
-	char **endptr _AND
-	int base)
-{
-	register const char *s = nptr;
-	register unsigned long long acc;
-	register int c;
-	register unsigned long long cutoff;
-	register int neg = 0, any, cutlim;
-
-	/*
-	 * See strtol for comments as to the logic used.
-	 */
-	do {
-		c = *s++;
-	} while (isspace(c));
-	if (c == '-') {
-		neg = 1;
-		c = *s++;
-	} else if (c == '+')
-		c = *s++;
-	if ((base == 0 || base == 16) &&
-	    c == '0' && (*s == 'x' || *s == 'X')) {
-		c = s[1];
-		s += 2;
-		base = 16;
-	}
-	if (base == 0)
-		base = c == '0' ? 8 : 10;
-	cutoff = (unsigned long long)ULONG_LONG_MAX / (unsigned long long)base;
-	cutlim = (unsigned long long)ULONG_LONG_MAX % (unsigned long long)base;
-	for (acc = 0, any = 0;; c = *s++) {
-		if (isdigit(c))
-			c -= '0';
-		else if (isalpha(c))
-			c -= isupper(c) ? 'A' - 10 : 'a' - 10;
-		else
-			break;
-		if (c >= base)
-			break;
-               if (any < 0 || acc > cutoff || (acc == cutoff && c > cutlim))
-			any = -1;
-		else {
-			any = 1;
-			acc *= base;
-			acc += c;
-		}
-	}
-	if (any < 0) {
-		acc = ULONG_LONG_MAX;
-		rptr->_errno = ERANGE;
-	} else if (neg)
-		acc = -acc;
-	if (endptr != 0)
-		*endptr = (char *) (any ? s - 1 : nptr);
-	return (acc);
-}
-
-#endif /* __GNUC__ */
diff --git a/newlib/libc/stdlib/system.c b/newlib/libc/stdlib/system.c
deleted file mode 100644
index ad2217743..000000000
--- a/newlib/libc/stdlib/system.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
-FUNCTION
-<<system>>---execute command string
-
-INDEX
-	system
-INDEX
-	_system_r
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int system(char *<[s]>);
-
-	int _system_r(void *<[reent]>, char *<[s]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int system(<[s]>)
-	char *<[s]>;
-
-	int _system_r(<[reent]>, <[s]>)
-	char *<[reent]>;
-	char *<[s]>;
-
-DESCRIPTION
-
-Use <<system>> to pass a command string <<*<[s]>>> to <</bin/sh>> on
-your system, and wait for it to finish executing.
-
-Use ``<<system(NULL)>>'' to test whether your system has <</bin/sh>>
-available.
-
-The alternate function <<_system_r>> is a reentrant version.  The
-extra argument <[reent]> is a pointer to a reentrancy structure.
-
-RETURNS
-<<system(NULL)>> returns a non-zero value if <</bin/sh>> is available, and
-<<0>> if it is not.
-
-With a command argument, the result of <<system>> is the exit status
-returned by <</bin/sh>>.
-
-PORTABILITY
-ANSI C requires <<system>>, but leaves the nature and effects of a
-command processor undefined.  ANSI C does, however, specify that
-<<system(NULL)>> return zero or nonzero to report on the existence of
-a command processor.
-
-POSIX.2 requires <<system>>, and requires that it invoke a <<sh>>.
-Where <<sh>> is found is left unspecified.
-
-Supporting OS subroutines required: <<_exit>>, <<_execve>>, <<_fork_r>>,
-<<_wait_r>>.
-*/
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <_syslist.h>
-#include <reent.h>
-
-#if defined (unix) || defined (__CYGWIN__)
-static int do_system ();
-#endif
-
-int
-_system_r (ptr, s)
-     struct _reent *ptr;
-     _CONST char *s;
-{
-#if defined(HAVE_SYSTEM)
-  return _system (s);
-  ptr = ptr;
-#elif defined(NO_EXEC)
-  if (s == NULL)
-    return 0;
-  errno = ENOSYS;
-  return -1;
-#else
-
-  /* ??? How to handle (s == NULL) here is not exactly clear.
-     If _fork_r fails, that's not really a justification for returning 0.
-     For now we always return 0 and leave it to each target to explicitly
-     handle otherwise (this can always be relaxed in the future).  */
-
-#if defined (unix) || defined (__CYGWIN__)
-  if (s == NULL)
-    return 1;
-  return do_system (ptr, s);
-#else
-  if (s == NULL)
-    return 0;
-  errno = ENOSYS;
-  return -1;
-#endif
-
-#endif
-}
-
-#ifndef _REENT_ONLY
-
-int
-system (s)
-     _CONST char *s;
-{
-  return _system_r (_REENT, s);
-}
-
-#endif
-
-#if defined (unix) && !defined (__CYGWIN__) && !defined(__rtems__)
-extern char **environ;
-
-/* Only deal with a pointer to environ, to work around subtle bugs with shared
-   libraries and/or small data systems where the user declares his own
-   'environ'.  */
-static char ***p_environ = &environ;
-
-static int
-do_system (ptr, s)
-     struct _reent *ptr;
-     _CONST char *s;
-{
-  char *argv[4];
-  int pid, status;
-
-  argv[0] = "sh";
-  argv[1] = "-c";
-  argv[2] = (char *) s;
-  argv[3] = NULL;
-
-  if ((pid = _fork_r (ptr)) == 0)
-    {
-      _execve ("/bin/sh", argv, *p_environ);
-      exit (100);
-    }
-  else if (pid == -1)
-    return -1;
-  else
-    {
-      int rc = _wait_r (ptr, &status);
-      if (rc == -1)
-	return -1;
-      status = (status >> 8) & 0xff;
-      return status;
-    }
-}
-#endif
-
-#if defined (__CYGWIN__)
-static int
-do_system (ptr, s)
-     struct _reent *ptr;
-     _CONST char *s;
-{
-  char *argv[4];
-  int pid, status;
-
-  argv[0] = "sh";
-  argv[1] = "-c";
-  argv[2] = (char *) s;
-  argv[3] = NULL;
-
-  if ((pid = vfork ()) == 0)
-    {
-      /* ??? It's not clear what's the right path to take (pun intended :-).
-	 There won't be an "sh" in any fixed location so we need each user
-	 to be able to say where to find "sh".  That suggests using an
-	 environment variable, but after a few more such situations we may
-	 have too many of them.  */
-      char *sh = getenv ("SH_PATH");
-      if (sh == NULL)
-	sh = "/bin/sh";
-      _execve (sh, argv, environ);
-      exit (100);
-    }
-  else if (pid == -1)
-    return -1;
-  else
-    {
-      int rc = _wait (&status);
-      if (rc == -1)
-	return -1;
-      status = (status >> 8) & 0xff;
-      return status;
-    }
-}
-#endif
diff --git a/newlib/libc/stdlib/valloc.c b/newlib/libc/stdlib/valloc.c
deleted file mode 100644
index 26a44df44..000000000
--- a/newlib/libc/stdlib/valloc.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef MALLOC_PROVIDED
-/* valloc.c -- a wrapper for valloc_r and pvalloc_r.  */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <malloc.h>
-
-#ifndef _REENT_ONLY
-
-_PTR
-_DEFUN (valloc, (nbytes),
-	size_t nbytes)
-{
-  return _valloc_r (_REENT, nbytes);
-}
-
-_PTR
-_DEFUN (pvalloc, (nbytes),
-	size_t nbytes)
-{
-  return _pvalloc_r (_REENT, nbytes);
-}
-
-#endif
-#endif
diff --git a/newlib/libc/stdlib/wcrtomb.c b/newlib/libc/stdlib/wcrtomb.c
deleted file mode 100644
index 0eb59ca94..000000000
--- a/newlib/libc/stdlib/wcrtomb.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-
-size_t
-_DEFUN (_wcrtomb_r, (ptr, s, wc, ps),
-	struct _reent *ptr _AND
-	char *s _AND
-	wchar_t wc _AND
-	mbstate_t *ps)
-{
-  int retval = 0;
-  char buf[10];
-
-#ifdef MB_CAPABLE
-  if (ps == NULL)
-    {
-      _REENT_CHECK_MISC(ptr);
-      ps = &(_REENT_WCRTOMB_STATE(ptr));
-    }
-#endif
-
-  if (s == NULL)
-    retval = _wctomb_r (ptr, buf, L'\0', ps);
-  else
-    retval = _wctomb_r (ptr, s, wc, ps);
-
-  if (retval == -1)
-    {
-      ps->__count = 0;
-      ptr->_errno = EILSEQ;
-      return (size_t)(-1);
-    }
-  else
-    return (size_t)retval;
-}
-
-#ifndef _REENT_ONLY
-size_t
-_DEFUN (wcrtomb, (s, wc, ps),
-	char *s _AND
-	wchar_t wc _AND
-	mbstate_t *ps)
-{
-  return _wcrtomb_r (_REENT, s, wc, ps);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/wcsrtombs.c b/newlib/libc/stdlib/wcsrtombs.c
deleted file mode 100644
index 677dfa1db..000000000
--- a/newlib/libc/stdlib/wcsrtombs.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-#include <errno.h>
-
-size_t
-_DEFUN (_wcsrtombs_r, (r, dst, src, len, ps),
-	struct _reent *r _AND
-	char *dst _AND
-	const wchar_t **src _AND
-	size_t len _AND
-	mbstate_t *ps)
-{
-  char *ptr = dst;
-  char buff[10];
-  wchar_t *pwcs;
-  size_t n;
-  int i;
-
-#ifdef MB_CAPABLE
-  if (ps == NULL)
-    {
-      _REENT_CHECK_MISC(r);
-      ps = &(_REENT_WCSRTOMBS_STATE(r));
-    }
-#endif
-
-  /* If no dst pointer, treat len as maximum possible value. */
-  if (dst == NULL)
-    len = (size_t)-1;
-
-  n = 0;
-  pwcs = (wchar_t *)(*src);
-
-  while (n < len)
-    {
-      int count = ps->__count;
-      wint_t wch = ps->__value.__wch;
-      int bytes = _wctomb_r (r, buff, *pwcs, ps);
-      if (bytes == -1)
-	{
-	  r->_errno = EILSEQ;
-	  ps->__count = 0;
-	  return (size_t)-1;
-	}
-      if (n <= len - bytes && bytes < len)
-	{
-          n += bytes;
-	  if (dst)
-	    {
-	      for (i = 0; i < bytes; ++i)
-	        *ptr++ = buff[i];
-	      ++(*src);
-	    }
-	  if (*pwcs++ == 0x00)
-	    {
-	      if (dst)
-	        *src = NULL;
-	      ps->__count = 0;
-	      return n - 1;
-	    }
-	}
-      else
-	{
-	  /* not enough room, we must back up state to before _wctomb_r call */
-	  ps->__count = count;
-	  ps->__value.__wch = wch;
-          len = 0;
-	}
-    }
-
-  return n;
-} 
-
-#ifndef _REENT_ONLY
-size_t
-_DEFUN (wcsrtombs, (dst, src, len, ps),
-	char *dst _AND
-	const wchar_t **src _AND
-	size_t len _AND
-	mbstate_t *ps)
-{
-  return _wcsrtombs_r (_REENT, dst, src, len, ps);
-}
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/wcstombs.c b/newlib/libc/stdlib/wcstombs.c
deleted file mode 100644
index f02d4ab1f..000000000
--- a/newlib/libc/stdlib/wcstombs.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-FUNCTION
-<<wcstombs>>---minimal wide char string to multibyte string converter
-
-INDEX
-	wcstombs
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int wcstombs(const char *<[s]>, wchar_t *<[pwc]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int wcstombs(<[s]>, <[pwc]>, <[n]>)
-	const char *<[s]>;
-	wchar_t *<[pwc]>;
-	size_t <[n]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<wcstombs>>.  In this case,
-all wide-characters are expected to represent single bytes and so
-are converted simply by casting to char.
-
-When MB_CAPABLE is defined, this routine calls <<_wcstombs_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-RETURNS
-This implementation of <<wcstombs>> returns <<0>> if
-<[s]> is <<NULL>> or is the empty string; 
-it returns <<-1>> if MB_CAPABLE and one of the
-wide-char characters does not represent a valid multi-byte character;
-otherwise it returns the minimum of: <<n>> or the
-number of bytes that are transferred to <<s>>, not including the
-nul terminator.
-
-If the return value is -1, the state of the <<pwc>> string is
-indeterminate.  If the input has a length of 0, the output
-string will be modified to contain a wchar_t nul terminator if
-<<n>> > 0.
-
-PORTABILITY
-<<wcstombs>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<wcstombs>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (wcstombs, (s, pwcs, n),
-        char          *s    _AND
-        const wchar_t *pwcs _AND
-        size_t         n)
-{
-#ifdef MB_CAPABLE
-  mbstate_t state;
-  state.__count = 0;
-  
-  return _wcstombs_r (_REENT, s, pwcs, n, &state);
-#else /* not MB_CAPABLE */
-  int count = 0;
-  
-  if (n != 0) {
-    do {
-      if ((*s++ = (char) *pwcs++) == 0)
-	break;
-      count++;
-    } while (--n != 0);
-  }
-  
-  return count;
-#endif /* not MB_CAPABLE */
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/wcstombs_r.c b/newlib/libc/stdlib/wcstombs_r.c
deleted file mode 100644
index 70f680a82..000000000
--- a/newlib/libc/stdlib/wcstombs_r.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <stdlib.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (_wcstombs_r, (reent, s, pwcs, n, state),
-        struct _reent *r    _AND         
-        char          *s    _AND
-        const wchar_t *pwcs _AND
-        size_t         n    _AND
-        mbstate_t     *state)
-{
-  char *ptr = s;
-  size_t max = n;
-  char buff[8];
-  int i, num_to_copy;
-
-  while (n > 0)
-    {
-      int bytes = _wctomb_r (r, buff, *pwcs, state);
-      if (bytes == -1)
-        return -1;
-      num_to_copy = (n > bytes ? bytes : (int)n);
-      for (i = 0; i < num_to_copy; ++i)
-        *ptr++ = buff[i];
-          
-      if (*pwcs == 0x00)
-        return ptr - s - (n >= bytes);
-      ++pwcs;
-      n -= num_to_copy;
-    }
-
-  return max;
-} 
diff --git a/newlib/libc/stdlib/wctob.c b/newlib/libc/stdlib/wctob.c
deleted file mode 100644
index 4288c54a8..000000000
--- a/newlib/libc/stdlib/wctob.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <wchar.h>
-#include <wchar.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <reent.h>
-
-int
-wctob (wint_t c)
-{
-  mbstate_t mbs;
-  int retval = 0;
-  unsigned char pwc;
-
-  /* Put mbs in initial state. */
-  memset (&mbs, '\0', sizeof (mbs));
-
-  _REENT_CHECK_MISC(_REENT);
-
-  retval = _wctomb_r (_REENT, &pwc, c, &mbs);
-
-  if (c == EOF || retval != 1)
-    return WEOF;
-  else
-    return (int)pwc;
-}
diff --git a/newlib/libc/stdlib/wctomb.c b/newlib/libc/stdlib/wctomb.c
deleted file mode 100644
index 5cff10fff..000000000
--- a/newlib/libc/stdlib/wctomb.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-FUNCTION
-<<wctomb>>---minimal wide char to multibyte converter
-
-INDEX
-	wctomb
-
-ANSI_SYNOPSIS
-	#include <stdlib.h>
-	int wctomb(char *<[s]>, wchar_t <[wchar]>);
-
-TRAD_SYNOPSIS
-	#include <stdlib.h>
-	int wctomb(<[s]>, <[wchar]>)
-	char *<[s]>;
-	wchar_t <[wchar]>;
-
-DESCRIPTION
-When MB_CAPABLE is not defined, this is a minimal ANSI-conforming 
-implementation of <<wctomb>>.  The
-only ``wide characters'' recognized are single bytes,
-and they are ``converted'' to themselves.  
-
-When MB_CAPABLE is defined, this routine calls <<_wctomb_r>> to perform
-the conversion, passing a state variable to allow state dependent
-decoding.  The result is based on the locale setting which may
-be restricted to a defined set of locales.
-
-Each call to <<wctomb>> modifies <<*<[s]>>> unless <[s]> is a null
-pointer or MB_CAPABLE is defined and <[wchar]> is invalid.
-
-RETURNS
-This implementation of <<wctomb>> returns <<0>> if
-<[s]> is <<NULL>>; it returns <<-1>> if MB_CAPABLE is enabled
-and the wchar is not a valid multi-byte character, it returns <<1>>
-if MB_CAPABLE is not defined or the wchar is in reality a single
-byte character, otherwise it returns the number of bytes in the
-multi-byte character.
-
-PORTABILITY
-<<wctomb>> is required in the ANSI C standard.  However, the precise
-effects vary with the locale.
-
-<<wctomb>> requires no supporting OS subroutines.
-*/
-
-#ifndef _REENT_ONLY
-
-#include <stdlib.h>
-
-int
-_DEFUN (wctomb, (s, wchar),
-        char *s _AND
-        wchar_t wchar)
-{
-#ifdef MB_CAPABLE
-        _REENT_CHECK_MISC(_REENT);
-
-        return _wctomb_r (_REENT, s, wchar, &(_REENT_WCTOMB_STATE(_REENT)));
-#else /* not MB_CAPABLE */
-        if (s == NULL)
-                return 0;
-
-        *s = (char) wchar;
-        return 1;
-#endif /* not MB_CAPABLE */
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/stdlib/wctomb_r.c b/newlib/libc/stdlib/wctomb_r.c
deleted file mode 100644
index a01863246..000000000
--- a/newlib/libc/stdlib/wctomb_r.c
+++ /dev/null
@@ -1,174 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-#include <wchar.h>
-#include <locale.h>
-#include "mbctype.h"
-
-/* for some conversions, we use the __count field as a place to store a state value */
-#define __state __count
-
-extern char __lc_ctype[12];
-
-int
-_DEFUN (_wctomb_r, (r, s, wchar, state),
-        struct _reent *r     _AND 
-        char          *s     _AND
-        wchar_t        wchar _AND
-        mbstate_t     *state)
-{
-  if (strlen (__lc_ctype) <= 1)
-    { /* fall-through */ }
-  else if (!strcmp (__lc_ctype, "C-UTF-8"))
-    {
-      if (s == NULL)
-        return 0; /* UTF-8 encoding is not state-dependent */
-
-      if (wchar <= 0x7f)
-        {
-          *s = wchar;
-          return 1;
-        }
-      else if (wchar >= 0x80 && wchar <= 0x7ff)
-        {
-          *s++ = 0xc0 | ((wchar & 0x7c0) >> 6);
-          *s   = 0x80 |  (wchar &  0x3f);
-          return 2;
-        }
-      else if (wchar >= 0x800 && wchar <= 0xffff)
-        {
-          /* UTF-16 surrogates -- must not occur in normal UCS-4 data */
-          if (wchar >= 0xd800 && wchar <= 0xdfff)
-            return -1;
-
-          *s++ = 0xe0 | ((wchar & 0xf000) >> 12);
-          *s++ = 0x80 | ((wchar &  0xfc0) >> 6);
-          *s   = 0x80 |  (wchar &   0x3f);
-          return 3;
-        }
-      else if (wchar >= 0x10000 && wchar <= 0x1fffff)
-        {
-          *s++ = 0xf0 | ((wchar & 0x1c0000) >> 18);
-          *s++ = 0x80 | ((wchar &  0x3f000) >> 12);
-          *s++ = 0x80 | ((wchar &    0xfc0) >> 6);
-          *s   = 0x80 |  (wchar &     0x3f);
-          return 4;
-        }
-      else if (wchar >= 0x200000 && wchar <= 0x3ffffff)
-        {
-          *s++ = 0xf8 | ((wchar & 0x3000000) >> 24);
-          *s++ = 0x80 | ((wchar &  0xfc0000) >> 18);
-          *s++ = 0x80 | ((wchar &   0x3f000) >> 12);
-          *s++ = 0x80 | ((wchar &     0xfc0) >> 6);
-          *s   = 0x80 |  (wchar &      0x3f);
-          return 5;
-        }
-      else if (wchar >= 0x4000000 && wchar <= 0x7fffffff)
-        {
-          *s++ = 0xfc | ((wchar & 0x40000000) >> 30);
-          *s++ = 0x80 | ((wchar & 0x3f000000) >> 24);
-          *s++ = 0x80 | ((wchar &   0xfc0000) >> 18);
-          *s++ = 0x80 | ((wchar &    0x3f000) >> 12);
-          *s++ = 0x80 | ((wchar &      0xfc0) >> 6);
-          *s   = 0x80 |  (wchar &       0x3f);
-          return 6;
-        }
-      else
-        return -1;
-    }
-  else if (!strcmp (__lc_ctype, "C-SJIS"))
-    {
-      unsigned char char2 = (unsigned char)wchar;
-      unsigned char char1 = (unsigned char)(wchar >> 8);
-
-      if (s == NULL)
-        return 0;  /* not state-dependent */
-
-      if (char1 != 0x00)
-        {
-        /* first byte is non-zero..validate multi-byte char */
-          if (_issjis1(char1) && _issjis2(char2)) 
-            {
-              *s++ = (char)char1;
-              *s = (char)char2;
-              return 2;
-            }
-          else
-            return -1;
-        }
-    }
-  else if (!strcmp (__lc_ctype, "C-EUCJP"))
-    {
-      unsigned char char2 = (unsigned char)wchar;
-      unsigned char char1 = (unsigned char)(wchar >> 8);
-
-      if (s == NULL)
-        return 0;  /* not state-dependent */
-
-      if (char1 != 0x00)
-        {
-        /* first byte is non-zero..validate multi-byte char */
-          if (_iseucjp (char1) && _iseucjp (char2)) 
-            {
-              *s++ = (char)char1;
-              *s = (char)char2;
-              return 2;
-            }
-          else
-            return -1;
-        }
-    }
-  else if (!strcmp (__lc_ctype, "C-JIS"))
-    {
-      int cnt = 0; 
-      unsigned char char2 = (unsigned char)wchar;
-      unsigned char char1 = (unsigned char)(wchar >> 8);
-
-      if (s == NULL)
-        return 1;  /* state-dependent */
-
-      if (char1 != 0x00)
-        {
-        /* first byte is non-zero..validate multi-byte char */
-          if (_isjis (char1) && _isjis (char2)) 
-            {
-              if (state->__state == 0)
-                {
-                  /* must switch from ASCII to JIS state */
-                  state->__state = 1;
-                  *s++ = ESC_CHAR;
-                  *s++ = '$';
-                  *s++ = 'B';
-                  cnt = 3;
-                }
-              *s++ = (char)char1;
-              *s = (char)char2;
-              return cnt + 2;
-            }
-          else
-            return -1;
-        }
-      else
-        {
-          if (state->__state != 0)
-            {
-              /* must switch from JIS to ASCII state */
-              state->__state = 0;
-              *s++ = ESC_CHAR;
-              *s++ = '(';
-              *s++ = 'B';
-              cnt = 3;
-            }
-          *s = (char)char2;
-          return cnt + 1;
-        }
-    }
-
-  if (s == NULL)
-    return 0;
- 
-  /* otherwise we are dealing with a single byte character */
-  *s = (char) wchar;
-  return 1;
-}
-    
-
diff --git a/newlib/libc/string/Makefile.am b/newlib/libc/string/Makefile.am
deleted file mode 100644
index cac5f1d53..000000000
--- a/newlib/libc/string/Makefile.am
+++ /dev/null
@@ -1,133 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	bcopy.c \
-	bzero.c \
-	index.c \
-	memchr.c \
-	memcmp.c \
-	memcpy.c \
-	memmove.c \
-	memset.c \
-	rindex.c \
-	strcasecmp.c \
-	strcat.c \
-	strchr.c \
-	strcmp.c \
-	strcoll.c \
-	strcpy.c \
-	strcspn.c \
-	strdup.c \
-	strdup_r.c \
-	strerror.c \
-	strerror_r.c \
-	strlcat.c \
-	strlcpy.c \
-	strlen.c  \
-	strlwr.c \
-	strncasecmp.c \
-	strncat.c \
-	strncmp.c \
-	strncpy.c \
-	strnlen.c \
-	strpbrk.c \
-	strrchr.c \
-	strsep.c \
-	strspn.c \
-	strtok.c \
-	strtok_r.c \
-	strupr.c \
-	strxfrm.c  \
-	strstr.c \
-	swab.c \
-	u_strerr.c \
-	wcscat.c \
-	wcschr.c \
-	wcscmp.c \
-	wcscoll.c \
-	wcscpy.c \
-	wcscspn.c \
-	wcslcat.c \
-	wcslcpy.c \
-	wcslen.c \
-	wcsncat.c \
-	wcsncmp.c \
-	wcsncpy.c \
-	wcsnlen.c \
-	wcspbrk.c \
-	wcsrchr.c \
-	wcsspn.c \
-	wcsstr.c \
-	wcswidth.c \
-	wcwidth.c \
-	wmemchr.c \
-	wmemcmp.c \
-	wmemcpy.c \
-	wmemmove.c \
-	wmemset.c
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-LIB_OBJS = \
-	bcmp.$(oext) \
-	memccpy.$(oext) \
-	mempcpy.$(oext) \
-	strndup.$(oext) \
-	strndup_r.$(oext)
-endif
-
-libstring_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libstring.la
-libstring_la_SOURCES = $(GENERAL_SOURCES)
-libstring_la_LIBADD = $(LIB_OBJS)
-libstring_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES=\
-bcmp.def	memcpy.def	strcmp.def	strncat.def strstr.def \
-bcopy.def	memmove.def	strcoll.def	strncmp.def strtok.def \
-bzero.def	memset.def	strcpy.def	strncpy.def strxfrm.def \
-index.def	rindex.def	strcspn.def	strpbrk.def swab.def \
-memchr.def	strcat.def	strerror.def	strerror_r.def strrchr.def \
-memcmp.def	strchr.def	strlen.def	strnlen.def strspn.def \
-strcasecmp.def	strncasecmp.def strlwr.def	strupr.def  memccpy.def \
-mempcpy.def \
-wcscat.def	wcschr.def	wcscmp.def	wcscoll.def \
-wcscpy.def	wcscspn.def \
-wcslcat.def	wcslcpy.def	wcslen.def	wcsncat.def \
-wcsncmp.def	wcsncpy.def	wcsnlen.def	wcspbrk.def \
-wcsrchr.def	wcsspn.def	wcsstr.def \
-wcswidth.def	wcwidth.def	wmemchr.def \
-wmemcmp.def	wmemcpy.def	wmemmove.def	wmemset.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/strings.tex >> $(TARGETDOC)
-	cat $(srcdir)/wcstrings.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/string/Makefile.in b/newlib/libc/string/Makefile.in
deleted file mode 100644
index 87adac44b..000000000
--- a/newlib/libc/string/Makefile.in
+++ /dev/null
@@ -1,517 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	bcopy.c \
-	bzero.c \
-	index.c \
-	memchr.c \
-	memcmp.c \
-	memcpy.c \
-	memmove.c \
-	memset.c \
-	rindex.c \
-	strcasecmp.c \
-	strcat.c \
-	strchr.c \
-	strcmp.c \
-	strcoll.c \
-	strcpy.c \
-	strcspn.c \
-	strdup.c \
-	strdup_r.c \
-	strerror.c \
-	strerror_r.c \
-	strlcat.c \
-	strlcpy.c \
-	strlen.c  \
-	strlwr.c \
-	strncasecmp.c \
-	strncat.c \
-	strncmp.c \
-	strncpy.c \
-	strnlen.c \
-	strpbrk.c \
-	strrchr.c \
-	strsep.c \
-	strspn.c \
-	strtok.c \
-	strtok_r.c \
-	strupr.c \
-	strxfrm.c  \
-	strstr.c \
-	swab.c \
-	u_strerr.c \
-	wcscat.c \
-	wcschr.c \
-	wcscmp.c \
-	wcscoll.c \
-	wcscpy.c \
-	wcscspn.c \
-	wcslcat.c \
-	wcslcpy.c \
-	wcslen.c \
-	wcsncat.c \
-	wcsncmp.c \
-	wcsncpy.c \
-	wcsnlen.c \
-	wcspbrk.c \
-	wcsrchr.c \
-	wcsspn.c \
-	wcsstr.c \
-	wcswidth.c \
-	wcwidth.c \
-	wmemchr.c \
-	wmemcmp.c \
-	wmemcpy.c \
-	wmemmove.c \
-	wmemset.c
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@\
-@ELIX_LEVEL_1_FALSE@	bcmp.$(oext) \
-@ELIX_LEVEL_1_FALSE@	memccpy.$(oext) \
-@ELIX_LEVEL_1_FALSE@	mempcpy.$(oext) \
-@ELIX_LEVEL_1_FALSE@	strndup.$(oext) \
-@ELIX_LEVEL_1_FALSE@	strndup_r.$(oext)
-
-libstring_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libstring.la
-@USE_LIBTOOL_TRUE@libstring_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libstring_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libstring_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = \
-bcmp.def	memcpy.def	strcmp.def	strncat.def strstr.def \
-bcopy.def	memmove.def	strcoll.def	strncmp.def strtok.def \
-bzero.def	memset.def	strcpy.def	strncpy.def strxfrm.def \
-index.def	rindex.def	strcspn.def	strpbrk.def swab.def \
-memchr.def	strcat.def	strerror.def	strerror_r.def strrchr.def \
-memcmp.def	strchr.def	strlen.def	strnlen.def strspn.def \
-strcasecmp.def	strncasecmp.def strlwr.def	strupr.def  memccpy.def \
-mempcpy.def \
-wcscat.def	wcschr.def	wcscmp.def	wcscoll.def \
-wcscpy.def	wcscspn.def \
-wcslcat.def	wcslcpy.def	wcslen.def	wcsncat.def \
-wcsncmp.def	wcsncpy.def	wcsnlen.def	wcspbrk.def \
-wcsrchr.def	wcsspn.def	wcsstr.def \
-wcswidth.def	wcwidth.def	wmemchr.def \
-wmemcmp.def	wmemcpy.def	wmemmove.def	wmemset.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  bcopy.$(OBJEXT) bzero.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@index.$(OBJEXT) memchr.$(OBJEXT) memcmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@memcpy.$(OBJEXT) memmove.$(OBJEXT) memset.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@rindex.$(OBJEXT) strcasecmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strcat.$(OBJEXT) strchr.$(OBJEXT) strcmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strcoll.$(OBJEXT) strcpy.$(OBJEXT) strcspn.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strdup.$(OBJEXT) strdup_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strerror.$(OBJEXT) strerror_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strlcat.$(OBJEXT) strlcpy.$(OBJEXT) strlen.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strlwr.$(OBJEXT) strncasecmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strncat.$(OBJEXT) strncmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strncpy.$(OBJEXT) strnlen.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strpbrk.$(OBJEXT) strrchr.$(OBJEXT) strsep.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strspn.$(OBJEXT) strtok.$(OBJEXT) strtok_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strupr.$(OBJEXT) strxfrm.$(OBJEXT) strstr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@swab.$(OBJEXT) u_strerr.$(OBJEXT) wcscat.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcschr.$(OBJEXT) wcscmp.$(OBJEXT) wcscoll.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcscpy.$(OBJEXT) wcscspn.$(OBJEXT) wcslcat.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcslcpy.$(OBJEXT) wcslen.$(OBJEXT) wcsncat.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcsncmp.$(OBJEXT) wcsncpy.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcsnlen.$(OBJEXT) wcspbrk.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcsrchr.$(OBJEXT) wcsspn.$(OBJEXT) wcsstr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wcswidth.$(OBJEXT) wcwidth.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wmemchr.$(OBJEXT) wmemcmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wmemcpy.$(OBJEXT) wmemmove.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wmemset.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libstring_la_OBJECTS =  bcopy.lo bzero.lo index.lo \
-@USE_LIBTOOL_TRUE@memchr.lo memcmp.lo memcpy.lo memmove.lo memset.lo \
-@USE_LIBTOOL_TRUE@rindex.lo strcasecmp.lo strcat.lo strchr.lo strcmp.lo \
-@USE_LIBTOOL_TRUE@strcoll.lo strcpy.lo strcspn.lo strdup.lo strdup_r.lo \
-@USE_LIBTOOL_TRUE@strerror.lo strerror_r.lo strlcat.lo strlcpy.lo \
-@USE_LIBTOOL_TRUE@strlen.lo strlwr.lo strncasecmp.lo strncat.lo \
-@USE_LIBTOOL_TRUE@strncmp.lo strncpy.lo strnlen.lo strpbrk.lo \
-@USE_LIBTOOL_TRUE@strrchr.lo strsep.lo strspn.lo strtok.lo strtok_r.lo \
-@USE_LIBTOOL_TRUE@strupr.lo strxfrm.lo strstr.lo swab.lo u_strerr.lo \
-@USE_LIBTOOL_TRUE@wcscat.lo wcschr.lo wcscmp.lo wcscoll.lo wcscpy.lo \
-@USE_LIBTOOL_TRUE@wcscspn.lo wcslcat.lo wcslcpy.lo wcslen.lo wcsncat.lo \
-@USE_LIBTOOL_TRUE@wcsncmp.lo wcsncpy.lo wcsnlen.lo wcspbrk.lo \
-@USE_LIBTOOL_TRUE@wcsrchr.lo wcsspn.lo wcsstr.lo wcswidth.lo wcwidth.lo \
-@USE_LIBTOOL_TRUE@wmemchr.lo wmemcmp.lo wmemcpy.lo wmemmove.lo \
-@USE_LIBTOOL_TRUE@wmemset.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libstring_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libstring_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus string/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libstring.la: $(libstring_la_OBJECTS) $(libstring_la_DEPENDENCIES)
-	$(LINK)  $(libstring_la_LDFLAGS) $(libstring_la_OBJECTS) $(libstring_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = string
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/strings.tex >> $(TARGETDOC)
-	cat $(srcdir)/wcstrings.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/string/bcmp.c b/newlib/libc/string/bcmp.c
deleted file mode 100644
index 23e7c26a2..000000000
--- a/newlib/libc/string/bcmp.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-FUNCTION
-	<<bcmp>>---compare two memory areas
-
-INDEX
-	bcmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int bcmp(const void *<[s1]>, const void *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int bcmp(<[s1]>, <[s2]>, <[n]>)
-	const void *<[s1]>;
-	const void *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	This function compares not more than <[n]> bytes of the
-	object pointed to by <[s1]> with the object pointed to by <[s2]>.
-
-	This function is identical to <<memcmp>>.
-	
-
-
-RETURNS
-	The function returns an integer greater than, equal to or
-	less than zero 	according to whether the object pointed to by
-	<[s1]> is greater than, equal to or less than the object
-	pointed to by <[s2]>.
-
-PORTABILITY
-<<bcmp>> requires no supporting OS subroutines.
-
-QUICKREF
-	bcmp ansi pure
-*/
-
-#include <string.h>
-
-int
-_DEFUN (bcmp, (m1, m2, n),
-	_CONST void *m1 _AND
-	_CONST void *m2 _AND
-	size_t n)
-
-{
-  return memcmp (m1, m2, n);
-}
diff --git a/newlib/libc/string/bcopy.c b/newlib/libc/string/bcopy.c
deleted file mode 100644
index 505e39dc7..000000000
--- a/newlib/libc/string/bcopy.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-FUNCTION
-	<<bcopy>>---copy memory regions
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void bcopy(const void *<[in]>, void *<[out]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	void bcopy(<[in]>, <[out]>, <[n]>
-	const void *<[in]>;
-	void *<[out]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	This function copies <[n]> bytes from the memory region
-	pointed to by <[in]> to the memory region pointed to by
-	<[out]>.
-
-	This function is implemented in term of <<memmove>>.
-
-PORTABILITY
-<<bcopy>> requires no supporting OS subroutines.
-
-QUICKREF
-	bcopy - pure
-*/
-
-#include <string.h>
-
-void
-_DEFUN (bcopy, (b1, b2, length),
-	_CONST void *b1 _AND
-	void *b2 _AND
-	size_t length)
-{
-  memmove (b2, b1, length);
-}
diff --git a/newlib/libc/string/bzero.c b/newlib/libc/string/bzero.c
deleted file mode 100644
index 661285f7b..000000000
--- a/newlib/libc/string/bzero.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-FUNCTION
-<<bzero>>---initialize memory to zero
-
-INDEX
-	bzero
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void bzero(void *<[b]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	void bzero(<[b]>, <[length]>)
-	void *<[b]>;
-	size_t <[length]>;
-
-DESCRIPTION
-<<bzero>> initializes <[length]> bytes of memory, starting at address
-<[b]>, to zero.
-
-RETURNS
-<<bzero>> does not return a result.
-
-PORTABILITY
-<<bzero>> is in the Berkeley Software Distribution.
-Neither ANSI C nor the System V Interface Definition (Issue 2) require
-<<bzero>>.
-
-<<bzero>> requires no supporting OS subroutines.
-*/
-
-#include <string.h>
-
-_VOID
-_DEFUN (bzero, (b, length),
-	void *b _AND
-	size_t length)
-{
-  char *ptr = (char *)b;
-  while (length--)
-    *ptr++ = 0;
-}
diff --git a/newlib/libc/string/index.c b/newlib/libc/string/index.c
deleted file mode 100644
index 6c165f952..000000000
--- a/newlib/libc/string/index.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-	<<index>>---search for character in string
-
-INDEX
-	index
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char * index(const char *<[string]>, int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char * index(<[string]>, <[c]>);
-	char *<[string]>;
-	int *<[c]>;
-
-DESCRIPTION
-	This function finds the first occurence of <[c]> (converted to
-	a char) in the string pointed to by <[string]> (including the
-	terminating null character).
-
-	This function is identical to <<strchr>>.
-
-RETURNS
-	Returns a pointer to the located character, or a null pointer
-	if <[c]> does not occur in <[string]>.
-
-PORTABILITY
-<<index>> requires no supporting OS subroutines.
-
-QUICKREF
-	index - pure
-*/
-
-#include <string.h>
-
-char *
-_DEFUN (index, (s, c),
-	_CONST char *s _AND
-	int c)
-{
-  return strchr (s, c);
-}
diff --git a/newlib/libc/string/memccpy.c b/newlib/libc/string/memccpy.c
deleted file mode 100644
index f677ac02e..000000000
--- a/newlib/libc/string/memccpy.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
-FUNCTION
-        <<memccpy>>---copy memory regions with end-token check
-
-ANSI_SYNOPSIS
-        #include <string.h>
-        void* memccpy(void *<[out]>, const void *<[in]>, 
-                      int <[endchar]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-        void *memccpy(<[out]>, <[in]>, <[endchar]>, <[n]>
-        void *<[out]>;
-        void *<[in]>;
-	int <[endchar]>;
-        size_t <[n]>;
-
-DESCRIPTION
-        This function copies up to <[n]> bytes from the memory region
-        pointed to by <[in]> to the memory region pointed to by
-        <[out]>.  If a byte matching the <[endchar]> is encountered,
-	the byte is copied and copying stops.
-
-        If the regions overlap, the behavior is undefined.
-
-RETURNS
-        <<memccpy>> returns a pointer to the first byte following the
-	<[endchar]> in the <[out]> region.  If no byte matching
-	<[endchar]> was copied, then <<NULL>> is returned.
-
-PORTABILITY
-<<memccpy>> is a GNU extension.
-
-<<memccpy>> requires no supporting OS subroutines.
-
-	*/
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LITTLEBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < LITTLEBLOCKSIZE)
-
-/* Macros for detecting endchar */
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-
-_PTR
-_DEFUN (memccpy, (dst0, src0, endchar, len0),
-	_PTR dst0 _AND
-	_CONST _PTR src0 _AND
-	int endchar0 _AND
-	size_t len0)
-{
-
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  _PTR ptr = NULL;
-  char *dst = (char *) dst0;
-  char *src = (char *) src0;
-  char endchar = endchar0 & 0xff;
-
-  while (len0--)
-    {
-      if ((*dst++ = *src++) == endchar)
-        {
-          ptr = dst;
-          break;
-        }
-    }
-
-  return ptr;
-#else
-  _PTR ptr = NULL;
-  char *dst = dst0;
-  _CONST char *src = src0;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-  int   len =  len0;
-  char endchar = endchar0 & 0xff;
-
-  /* If the size is small, or either SRC or DST is unaligned,
-     then punt into the byte copy loop.  This should be rare.  */
-  if (!TOO_SMALL(len) && !UNALIGNED (src, dst))
-    {
-      int i;
-      unsigned long mask = 0;
-
-      aligned_dst = (long*)dst;
-      aligned_src = (long*)src;
-
-      /* The fast code reads the ASCII one word at a time and only
-         performs the bytewise search on word-sized segments if they
-         contain the search character, which is detected by XORing
-         the word-sized segment with a word-sized block of the search
-         character and then detecting for the presence of NULL in the
-         result.  */
-      for (i = 0; i < LITTLEBLOCKSIZE; i++)
-        mask = (mask << 8) + endchar;
-
-
-      /* Copy one long word at a time if possible.  */
-      while (len >= LITTLEBLOCKSIZE)
-        {
-          unsigned long buffer = (unsigned long)(*aligned_src);
-          buffer ^=  mask;
-          if (DETECTNULL (buffer))
-            break; /* endchar is found, go byte by byte from here */
-          *aligned_dst++ = *aligned_src++;
-          len -= LITTLEBLOCKSIZE;
-        }
-
-       /* Pick up any residual with a byte copier.  */
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-    }
-
-  while (len--)
-    {
-      if ((*dst++ = *src++) == endchar)
-        {
-          ptr = dst;
-          break;
-        }
-    }
-
-  return ptr;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/memchr.c b/newlib/libc/string/memchr.c
deleted file mode 100644
index 2fd3c861d..000000000
--- a/newlib/libc/string/memchr.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
-FUNCTION
-	<<memchr>>---find character in memory
-
-INDEX
-	memchr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void *memchr(const void *<[src]>, int <[c]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	void *memchr(<[src]>, <[c]>, <[length]>)
-	void *<[src]>;
-	void *<[c]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	This function searches memory starting at <<*<[src]>>> for the
-	character <[c]>.  The search only ends with the first
-	occurrence of <[c]>, or after <[length]> characters; in
-	particular, <<NULL>> does not terminate the search.
-
-RETURNS
-	If the character <[c]> is found within <[length]> characters
-	of <<*<[src]>>>, a pointer to the character is returned. If
-	<[c]> is not found, then <<NULL>> is returned.
-
-PORTABILITY
-<<memchr>>> is ANSI C.
-
-<<memchr>>  requires no supporting OS subroutines.
-
-QUICKREF
-	memchr ansi pure
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X) ((long)X & (sizeof (long) - 1))
-
-/* How many bytes are loaded each iteration of the word copy loop.  */
-#define LBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the bytewise iterator.  */
-#define TOO_SMALL(LEN)  ((LEN) < LBLOCKSIZE)
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-
-_PTR
-_DEFUN (memchr, (src_void, c, length),
-	_CONST _PTR src_void _AND
-	int c _AND
-	size_t length)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  _CONST unsigned char *src = (_CONST unsigned char *) src_void;
-
-  c &= 0xff;
-  
-  while (length--)
-    {
-      if (*src == c)
-	return (char *) src;
-      src++;
-    }
-  return NULL;
-#else
-  _CONST unsigned char *src = (_CONST unsigned char *) src_void;
-  unsigned long *asrc;
-  unsigned long  buffer;
-  unsigned long  mask;
-  int i, j;
-
-  c &= 0xff;
-  
-  /* If the size is small, or src is unaligned, then 
-     use the bytewise loop.  We can hope this is rare.  */
-  if (!TOO_SMALL (length) && !UNALIGNED (src)) 
-    {
-      /* The fast code reads the ASCII one word at a time and only 
-         performs the bytewise search on word-sized segments if they
-         contain the search character, which is detected by XORing 
-         the word-sized segment with a word-sized block of the search
-         character and then detecting for the presence of NULL in the
-         result.  */
-      asrc = (unsigned long*) src;
-      mask = 0;
-      for (i = 0; i < LBLOCKSIZE; i++)
-        mask = (mask << 8) + c;
-
-      while (length >= LBLOCKSIZE)
-        {
-          buffer = *asrc;
-          buffer ^=  mask;
-          if (DETECTNULL (buffer))
-	    {
-              src = (unsigned char*) asrc;
-  	      for ( j = 0; j < LBLOCKSIZE; j++ )
-	        {
-                  if (*src == c)
-                    return (char*) src;
-                  src++;
-	        }
-   	    }
-          length -= LBLOCKSIZE;
-          asrc++;
-        }
-  
-      /* If there are fewer than LBLOCKSIZE characters left,
-         then we resort to the bytewise loop.  */
-
-      src = (unsigned char*) asrc;
-    }
-
-  while (length--)
-    { 
-      if (*src == c)
-        return (char*) src;
-      src++;
-    } 
-
-  return NULL;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/memcmp.c b/newlib/libc/string/memcmp.c
deleted file mode 100644
index ac7a194a6..000000000
--- a/newlib/libc/string/memcmp.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-FUNCTION
-	<<memcmp>>---compare two memory areas
-
-INDEX
-	memcmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int memcmp(const void *<[s1]>, const void *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int memcmp(<[s1]>, <[s2]>, <[n]>)
-	void *<[s1]>;
-	void *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	This function compares not more than <[n]> characters of the
-	object pointed to by <[s1]> with the object pointed to by <[s2]>.
-
-
-RETURNS
-	The function returns an integer greater than, equal to or
-	less than zero 	according to whether the object pointed to by
-	<[s1]> is greater than, equal to or less than the object
-	pointed to by <[s2]>.
-
-PORTABILITY
-<<memcmp>> is ANSI C.
-
-<<memcmp>> requires no supporting OS subroutines.
-
-QUICKREF
-	memcmp ansi pure
-*/
-
-#include <string.h>
-
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < LBLOCKSIZE)
-
-int
-_DEFUN (memcmp, (m1, m2, n),
-	_CONST _PTR m1 _AND
-	_CONST _PTR m2 _AND
-	size_t n)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  unsigned char *s1 = (unsigned char *) m1;
-  unsigned char *s2 = (unsigned char *) m2;
-
-  while (n--)
-    {
-      if (*s1 != *s2)
-	{
-	  return *s1 - *s2;
-	}
-      s1++;
-      s2++;
-    }
-  return 0;
-#else  
-  unsigned char *s1 = (unsigned char *) m1;
-  unsigned char *s2 = (unsigned char *) m2;
-  unsigned long *a1;
-  unsigned long *a2;
-
-  /* If the size is too small, or either pointer is unaligned,
-     then we punt to the byte compare loop.  Hopefully this will
-     not turn up in inner loops.  */
-  if (!TOO_SMALL(n) && !UNALIGNED(s1,s2))
-    {
-      /* Otherwise, load and compare the blocks of memory one 
-         word at a time.  */
-      a1 = (unsigned long*) s1;
-      a2 = (unsigned long*) s2;
-      while (n >= LBLOCKSIZE)
-        {
-          if (*a1 != *a2) 
-   	    break;
-          a1++;
-          a2++;
-          n -= LBLOCKSIZE;
-        }
-
-      /* check m mod LBLOCKSIZE remaining characters */
-
-      s1 = (char*)a1;
-      s2 = (char*)a2;
-    }
-
-  while (n--)
-    {
-      if (*s1 != *s2)
-	return *s1 - *s2;
-      s1++;
-      s2++;
-    }
-
-  return 0;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
-
diff --git a/newlib/libc/string/memcpy.c b/newlib/libc/string/memcpy.c
deleted file mode 100644
index 5336f25a9..000000000
--- a/newlib/libc/string/memcpy.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-FUNCTION
-        <<memcpy>>---copy memory regions
-
-ANSI_SYNOPSIS
-        #include <string.h>
-        void* memcpy(void *<[out]>, const void *<[in]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-        void *memcpy(<[out]>, <[in]>, <[n]>
-        void *<[out]>;
-        void *<[in]>;
-        size_t <[n]>;
-
-DESCRIPTION
-        This function copies <[n]> bytes from the memory region
-        pointed to by <[in]> to the memory region pointed to by
-        <[out]>.
-
-        If the regions overlap, the behavior is undefined.
-
-RETURNS
-        <<memcpy>> returns a pointer to the first byte of the <[out]>
-        region.
-
-PORTABILITY
-<<memcpy>> is ANSI C.
-
-<<memcpy>> requires no supporting OS subroutines.
-
-QUICKREF
-        memcpy ansi pure
-	*/
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* How many bytes are copied each iteration of the 4X unrolled loop.  */
-#define BIGBLOCKSIZE    (sizeof (long) << 2)
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LITTLEBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < BIGBLOCKSIZE)
-
-_PTR
-_DEFUN (memcpy, (dst0, src0, len0),
-	_PTR dst0 _AND
-	_CONST _PTR src0 _AND
-	size_t len0)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *dst = (char *) dst0;
-  char *src = (char *) src0;
-
-  _PTR save = dst0;
-
-  while (len0--)
-    {
-      *dst++ = *src++;
-    }
-
-  return save;
-#else
-  char *dst = dst0;
-  _CONST char *src = src0;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-  int   len =  len0;
-
-  /* If the size is small, or either SRC or DST is unaligned,
-     then punt into the byte copy loop.  This should be rare.  */
-  if (!TOO_SMALL(len) && !UNALIGNED (src, dst))
-    {
-      aligned_dst = (long*)dst;
-      aligned_src = (long*)src;
-
-      /* Copy 4X long words at a time if possible.  */
-      while (len >= BIGBLOCKSIZE)
-        {
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          len -= BIGBLOCKSIZE;
-        }
-
-      /* Copy one long word at a time if possible.  */
-      while (len >= LITTLEBLOCKSIZE)
-        {
-          *aligned_dst++ = *aligned_src++;
-          len -= LITTLEBLOCKSIZE;
-        }
-
-       /* Pick up any residual with a byte copier.  */
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-    }
-
-  while (len--)
-    *dst++ = *src++;
-
-  return dst0;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/memmove.c b/newlib/libc/string/memmove.c
deleted file mode 100644
index 2528e27d4..000000000
--- a/newlib/libc/string/memmove.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
-FUNCTION
-	<<memmove>>---move possibly overlapping memory
-
-INDEX
-	memmove
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void *memmove(void *<[dst]>, const void *<[src]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	void *memmove(<[dst]>, <[src]>, <[length]>)
-	void *<[dst]>;
-	void *<[src]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	This function moves <[length]> characters from the block of
-	memory starting at <<*<[src]>>> to the memory starting at
-	<<*<[dst]>>>. <<memmove>> reproduces the characters correctly
-	at <<*<[dst]>>> even if the two areas overlap.
-
-
-RETURNS
-	The function returns <[dst]> as passed.
-
-PORTABILITY
-<<memmove>> is ANSI C.
-
-<<memmove>> requires no supporting OS subroutines.
-
-QUICKREF
-	memmove ansi pure
-*/
-
-#include <string.h>
-#include <_ansi.h>
-#include <stddef.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* How many bytes are copied each iteration of the 4X unrolled loop.  */
-#define BIGBLOCKSIZE    (sizeof (long) << 2)
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LITTLEBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < BIGBLOCKSIZE)
-
-/*SUPPRESS 20*/
-_PTR
-_DEFUN (memmove, (dst_void, src_void, length),
-	_PTR dst_void _AND
-	_CONST _PTR src_void _AND
-	size_t length)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *dst = dst_void;
-  _CONST char *src = src_void;
-
-  if (src < dst && dst < src + length)
-    {
-      /* Have to copy backwards */
-      src += length;
-      dst += length;
-      while (length--)
-	{
-	  *--dst = *--src;
-	}
-    }
-  else
-    {
-      while (length--)
-	{
-	  *dst++ = *src++;
-	}
-    }
-
-  return dst_void;
-#else
-  char *dst = dst_void;
-  _CONST char *src = src_void;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-  int   len =  length;
-
-  if (src < dst && dst < src + len)
-    {
-      /* Destructive overlap...have to copy backwards */
-      src += len;
-      dst += len;
-      while (len--)
-	{
-	  *--dst = *--src;
-	}
-    }
-  else
-    {
-      /* Use optimizing algorithm for a non-destructive copy to closely 
-         match memcpy. If the size is small or either SRC or DST is unaligned,
-         then punt into the byte copy loop.  This should be rare.  */
-      if (!TOO_SMALL(len) && !UNALIGNED (src, dst))
-        {
-          aligned_dst = (long*)dst;
-          aligned_src = (long*)src;
-
-          /* Copy 4X long words at a time if possible.  */
-          while (len >= BIGBLOCKSIZE)
-            {
-              *aligned_dst++ = *aligned_src++;
-              *aligned_dst++ = *aligned_src++;
-              *aligned_dst++ = *aligned_src++;
-              *aligned_dst++ = *aligned_src++;
-              len -= BIGBLOCKSIZE;
-            }
-
-          /* Copy one long word at a time if possible.  */
-          while (len >= LITTLEBLOCKSIZE)
-            {
-              *aligned_dst++ = *aligned_src++;
-              len -= LITTLEBLOCKSIZE;
-            }
-
-          /* Pick up any residual with a byte copier.  */
-          dst = (char*)aligned_dst;
-          src = (char*)aligned_src;
-        }
-
-      while (len--)
-        {
-          *dst++ = *src++;
-        }
-    }
-
-  return dst_void;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/mempcpy.c b/newlib/libc/string/mempcpy.c
deleted file mode 100644
index 284cbea79..000000000
--- a/newlib/libc/string/mempcpy.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-FUNCTION
-        <<mempcpy>>---copy memory regions and return end pointer
-
-ANSI_SYNOPSIS
-        #include <string.h>
-        void* mempcpy(void *<[out]>, const void *<[in]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-        void *mempcpy(<[out]>, <[in]>, <[n]>
-        void *<[out]>;
-        void *<[in]>;
-        size_t <[n]>;
-
-DESCRIPTION
-        This function copies <[n]> bytes from the memory region
-        pointed to by <[in]> to the memory region pointed to by
-        <[out]>.
-
-        If the regions overlap, the behavior is undefined.
-
-RETURNS
-        <<mempcpy>> returns a pointer to the byte following the
-        last byte copied to the <[out]> region.
-
-PORTABILITY
-<<mempcpy>> is a GNU extension.
-
-<<mempcpy>> requires no supporting OS subroutines.
-
-	*/
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <limits.h>
-#include <string.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* How many bytes are copied each iteration of the 4X unrolled loop.  */
-#define BIGBLOCKSIZE    (sizeof (long) << 2)
-
-/* How many bytes are copied each iteration of the word copy loop.  */
-#define LITTLEBLOCKSIZE (sizeof (long))
-
-/* Threshhold for punting to the byte copier.  */
-#define TOO_SMALL(LEN)  ((LEN) < BIGBLOCKSIZE)
-
-_PTR
-_DEFUN (mempcpy, (dst0, src0, len0),
-	_PTR dst0 _AND
-	_CONST _PTR src0 _AND
-	size_t len0)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *dst = (char *) dst0;
-  char *src = (char *) src0;
-
-  while (len0--)
-    {
-      *dst++ = *src++;
-    }
-
-  return dst;
-#else
-  char *dst = dst0;
-  _CONST char *src = src0;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-  int   len =  len0;
-
-  /* If the size is small, or either SRC or DST is unaligned,
-     then punt into the byte copy loop.  This should be rare.  */
-  if (!TOO_SMALL(len) && !UNALIGNED (src, dst))
-    {
-      aligned_dst = (long*)dst;
-      aligned_src = (long*)src;
-
-      /* Copy 4X long words at a time if possible.  */
-      while (len >= BIGBLOCKSIZE)
-        {
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          *aligned_dst++ = *aligned_src++;
-          len -= BIGBLOCKSIZE;
-        }
-
-      /* Copy one long word at a time if possible.  */
-      while (len >= LITTLEBLOCKSIZE)
-        {
-          *aligned_dst++ = *aligned_src++;
-          len -= LITTLEBLOCKSIZE;
-        }
-
-       /* Pick up any residual with a byte copier.  */
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-    }
-
-  while (len--)
-    *dst++ = *src++;
-
-  return dst;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/memset.c b/newlib/libc/string/memset.c
deleted file mode 100644
index ac3590ea4..000000000
--- a/newlib/libc/string/memset.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-FUNCTION
-	<<memset>>---set an area of memory
-
-INDEX
-	memset
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	void *memset(const void *<[dst]>, int <[c]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	void *memset(<[dst]>, <[c]>, <[length]>)
-	void *<[dst]>;
-	int <[c]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	This function converts the argument <[c]> into an unsigned
-	char and fills the first <[length]> characters of the array
-	pointed to by <[dst]> to the value.
-
-RETURNS
-	<<memset>> returns the value of <[m]>.
-
-PORTABILITY
-<<memset>> is ANSI C.
-
-    <<memset>> requires no supporting OS subroutines.
-
-QUICKREF
-	memset ansi pure
-*/
-
-#include <string.h>
-
-#define LBLOCKSIZE (sizeof(long))
-#define UNALIGNED(X)   ((long)X & (LBLOCKSIZE - 1))
-#define TOO_SMALL(LEN) ((LEN) < LBLOCKSIZE)
-
-_PTR 
-_DEFUN (memset, (m, c, n),
-	_PTR m _AND
-	int c _AND
-	size_t n)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *s = (char *) m;
-
-  while (n-- != 0)
-    {
-      *s++ = (char) c;
-    }
-
-  return m;
-#else
-  char *s = (char *) m;
-  int i;
-  unsigned long buffer;
-  unsigned long *aligned_addr;
-  unsigned int d = c & 0xff;	/* To avoid sign extension, copy C to an
-				   unsigned variable.  */
-
-  if (!TOO_SMALL (n) && !UNALIGNED (m))
-    {
-      /* If we get this far, we know that n is large and m is word-aligned. */
-      aligned_addr = (unsigned long*)m;
-
-      /* Store D into each char sized location in BUFFER so that
-         we can set large blocks quickly.  */
-      if (LBLOCKSIZE == 4)
-        {
-          buffer = (d << 8) | d;
-          buffer |= (buffer << 16);
-        }
-      else
-        {
-          buffer = 0;
-          for (i = 0; i < LBLOCKSIZE; i++)
-	    buffer = (buffer << 8) | d;
-        }
-
-      while (n >= LBLOCKSIZE*4)
-        {
-          *aligned_addr++ = buffer;
-          *aligned_addr++ = buffer;
-          *aligned_addr++ = buffer;
-          *aligned_addr++ = buffer;
-          n -= 4*LBLOCKSIZE;
-        }
-
-      while (n >= LBLOCKSIZE)
-        {
-          *aligned_addr++ = buffer;
-          n -= LBLOCKSIZE;
-        }
-      /* Pick up the remainder with a bytewise loop.  */
-      s = (char*)aligned_addr;
-    }
-
-  while (n--)
-    {
-      *s++ = (char)d;
-    }
-
-  return m;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/rindex.c b/newlib/libc/string/rindex.c
deleted file mode 100644
index 3c6dff909..000000000
--- a/newlib/libc/string/rindex.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-	<<rindex>>---reverse search for character in string
-
-INDEX
-	rindex
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char * rindex(const char *<[string]>, int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char * rindex(<[string]>, <[c]>);
-	char *<[string]>;
-	int *<[c]>;
-
-DESCRIPTION
-	This function finds the last occurence of <[c]> (converted to
-	a char) in the string pointed to by <[string]> (including the
-	terminating null character).
-
-	This function is identical to <<strrchr>>.
-
-RETURNS
-	Returns a pointer to the located character, or a null pointer
-	if <[c]> does not occur in <[string]>.
-
-PORTABILITY
-<<rindex>> requires no supporting OS subroutines.
-
-QUICKREF
-	rindex - pure
-*/
-
-#include <string.h>
-
-char *
-_DEFUN (rindex, (s, c),
-	_CONST char *s _AND
-	int c)
-{
-  return strrchr (s, c);
-}
diff --git a/newlib/libc/string/strcasecmp.c b/newlib/libc/string/strcasecmp.c
deleted file mode 100644
index 4dcfc784a..000000000
--- a/newlib/libc/string/strcasecmp.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-FUNCTION
-	<<strcasecmp>>---case insensitive character string compare
-	
-INDEX
-	strcasecmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int strcasecmp(const char *<[a]>, const char *<[b]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int strcasecmp(<[a]>, <[b]>)
-	char *<[a]>;
-	char *<[b]>;
-
-DESCRIPTION
-	<<strcasecmp>> compares the string at <[a]> to
-	the string at <[b]> in a case-insensitive manner.
-
-RETURNS 
-
-	If <<*<[a]>>> sorts lexicographically after <<*<[b]>>> (after
-	both are converted to upper case), <<strcasecmp>> returns a
-	number greater than zero.  If the two strings match,
-	<<strcasecmp>> returns zero.  If <<*<[a]>>> sorts
-	lexicographically before <<*<[b]>>>, <<strcasecmp>> returns a
-	number less than zero.
-
-PORTABILITY
-<<strcasecmp>> is in the Berkeley Software Distribution.
-
-<<strcasecmp>> requires no supporting OS subroutines. It uses
-tolower() from elsewhere in this library.
-
-QUICKREF
-	strcasecmp 
-*/
-
-#include <string.h>
-#include <ctype.h>
-
-int
-_DEFUN (strcasecmp, (s1, s2),
-	_CONST char *s1 _AND
-	_CONST char *s2)
-{
-  while (*s1 != '\0' && tolower(*s1) == tolower(*s2))
-    {
-      s1++;
-      s2++;
-    }
-
-  return tolower(*(unsigned char *) s1) - tolower(*(unsigned char *) s2);
-}
diff --git a/newlib/libc/string/strcat.c b/newlib/libc/string/strcat.c
deleted file mode 100644
index 411eadb85..000000000
--- a/newlib/libc/string/strcat.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-FUNCTION
-	<<strcat>>---concatenate strings
-
-INDEX
-	strcat
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strcat(char *<[dst]>, const char *<[src]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strcat(<[dst]>, <[src]>)
-	char *<[dst]>;
-	char *<[src]>;
-
-DESCRIPTION
-	<<strcat>> appends a copy of the string pointed to by <[src]>
-	(including the terminating null character) to the end of the
-	string pointed to by <[dst]>.  The initial character of
-	<[src]> overwrites the null character at the end of <[dst]>.
-
-RETURNS
-	This function returns the initial value of <[dst]>
-
-PORTABILITY
-<<strcat>> is ANSI C.
-
-<<strcat>> requires no supporting OS subroutines.
-
-QUICKREF
-	strcat ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if X is aligned on a "long" boundary.  */
-#define ALIGNED(X) \
-  (((long)X & (sizeof (long) - 1)) == 0)
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-
-/*SUPPRESS 560*/
-/*SUPPRESS 530*/
-
-char *
-_DEFUN (strcat, (s1, s2),
-	char *s1 _AND
-	_CONST char *s2)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *s = s1;
-
-  while (*s1)
-    s1++;
-
-  while (*s1++ = *s2++)
-    ;
-  return s;
-#else
-  char *s = s1;
-
-
-  /* Skip over the data in s1 as quickly as possible.  */
-  if (ALIGNED (s1))
-    {
-      unsigned long *aligned_s1 = (unsigned long *)s1;
-      while (!DETECTNULL (*aligned_s1))
-	aligned_s1++;
-
-      s1 = (char *)aligned_s1;
-    }
-
-  while (*s1)
-    s1++;
-
-  /* s1 now points to the its trailing null character, we can
-     just use strcpy to do the work for us now.
-
-     ?!? We might want to just include strcpy here.
-     Also, this will cause many more unaligned string copies because
-     s1 is much less likely to be aligned.  I don't know if its worth
-     tweaking strcpy to handle this better.  */
-  strcpy (s1, s2);
-	
-  return s;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strchr.c b/newlib/libc/string/strchr.c
deleted file mode 100644
index 60b0fde8e..000000000
--- a/newlib/libc/string/strchr.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-FUNCTION
-	<<strchr>>---search for character in string
-
-INDEX
-	strchr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char * strchr(const char *<[string]>, int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char * strchr(<[string]>, <[c]>);
-	const char *<[string]>;
-	int <[c]>;
-
-DESCRIPTION
-	This function finds the first occurence of <[c]> (converted to
-	a char) in the string pointed to by <[string]> (including the
-	terminating null character).
-
-RETURNS
-	Returns a pointer to the located character, or a null pointer
-	if <[c]> does not occur in <[string]>.
-
-PORTABILITY
-<<strchr>> is ANSI C.
-
-<<strchr>> requires no supporting OS subroutines.
-
-QUICKREF
-	strchr ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if X is not aligned on a "long" boundary.  */
-#define UNALIGNED(X) ((long)X & (sizeof (long) - 1))
-
-/* How many bytes are loaded each iteration of the word copy loop.  */
-#define LBLOCKSIZE (sizeof (long))
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-/* DETECTCHAR returns nonzero if (long)X contains the byte used 
-   to fill (long)MASK. */
-#define DETECTCHAR(X,MASK) (DETECTNULL(X ^ MASK))
-
-char *
-_DEFUN (strchr, (s1, i),
-	_CONST char *s1 _AND
-	int i)
-{
-  _CONST unsigned char *s = (_CONST unsigned char *)s1;
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  unsigned char c = (unsigned int)i;
-
-  while (*s && *s != c)
-    {
-      s++;
-    }
-
-  if (*s != c)
-    {
-      s = NULL;
-    }
-
-  return (char *) s;
-#else
-  unsigned char c = (unsigned char)i;
-  unsigned long mask,j;
-  unsigned long *aligned_addr;
-
-  if (!UNALIGNED (s))
-    {
-      mask = 0;
-      for (j = 0; j < LBLOCKSIZE; j++)
-        mask = (mask << 8) | c;
-
-      aligned_addr = (unsigned long*)s;
-      while (!DETECTNULL (*aligned_addr) && !DETECTCHAR (*aligned_addr, mask))
-        aligned_addr++;
-
-      /* The block of bytes currently pointed to by aligned_addr
-         contains either a null or the target char, or both.  We
-         catch it using the bytewise search.  */
-
-      s = (unsigned char*)aligned_addr;
-    }
-
-  while (*s && *s != c)
-      s++;
-  if (*s == c)
-    return (char *)s;
-  return NULL;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strcmp.c b/newlib/libc/string/strcmp.c
deleted file mode 100644
index 81d65272e..000000000
--- a/newlib/libc/string/strcmp.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-FUNCTION
-	<<strcmp>>---character string compare
-	
-INDEX
-	strcmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int strcmp(const char *<[a]>, const char *<[b]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int strcmp(<[a]>, <[b]>)
-	char *<[a]>;
-	char *<[b]>;
-
-DESCRIPTION
-	<<strcmp>> compares the string at <[a]> to
-	the string at <[b]>.
-
-RETURNS
-	If <<*<[a]>>> sorts lexicographically after <<*<[b]>>>,
-	<<strcmp>> returns a number greater than zero.  If the two
-	strings match, <<strcmp>> returns zero.  If <<*<[a]>>>
-	sorts lexicographically before <<*<[b]>>>, <<strcmp>> returns a
-	number less than zero.
-
-PORTABILITY
-<<strcmp>> is ANSI C.
-
-<<strcmp>> requires no supporting OS subroutines.
-
-QUICKREF
-	strcmp ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* DETECTNULL returns nonzero if (long)X contains a NULL byte. */
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-int
-_DEFUN (strcmp, (s1, s2),
-	_CONST char *s1 _AND
-	_CONST char *s2)
-{ 
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  while (*s1 != '\0' && *s1 == *s2)
-    {
-      s1++;
-      s2++;
-    }
-
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-#else
-  unsigned long *a1;
-  unsigned long *a2;
-
-  /* If s1 or s2 are unaligned, then compare bytes. */
-  if (!UNALIGNED (s1, s2))
-    {  
-      /* If s1 and s2 are word-aligned, compare them a word at a time. */
-      a1 = (unsigned long*)s1;
-      a2 = (unsigned long*)s2;
-      while (*a1 == *a2)
-        {
-          /* To get here, *a1 == *a2, thus if we find a null in *a1,
-	     then the strings must be equal, so return zero.  */
-          if (DETECTNULL (*a1))
-	    return 0;
-
-          a1++;
-          a2++;
-        }
-
-      /* A difference was detected in last few bytes of s1, so search bytewise */
-      s1 = (char*)a1;
-      s2 = (char*)a2;
-    }
-
-  while (*s1 != '\0' && *s1 == *s2)
-    {
-      s1++;
-      s2++;
-    }
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strcoll.c b/newlib/libc/string/strcoll.c
deleted file mode 100644
index 8760b2217..000000000
--- a/newlib/libc/string/strcoll.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-FUNCTION
-	<<strcoll>>---locale specific character string compare
-	
-INDEX
-	strcoll
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int strcoll(const char *<[stra]>, const char * <[strb]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int strcoll(<[stra]>, <[strb]>)
-	char *<[stra]>;
-	char *<[strb]>;
-
-DESCRIPTION
-	<<strcoll>> compares the string pointed to by <[stra]> to
-	the string pointed to by <[strb]>, using an interpretation
-	appropriate to the current <<LC_COLLATE>> state.
-
-RETURNS
-	If the first string is greater than the second string,
-	<<strcoll>> returns a number greater than zero.  If the two
-	strings are equivalent, <<strcoll>> returns zero.  If the first
-	string is less than the second string, <<strcoll>> returns a
-	number less than zero.
-
-PORTABILITY
-<<strcoll>> is ANSI C.
-
-<<strcoll>> requires no supporting OS subroutines.
-
-QUICKREF
-	strcoll ansi pure
-*/
-
-#include <string.h>
-
-int
-_DEFUN (strcoll, (a, b),
-	_CONST char *a _AND
-	_CONST char *b)
-
-{
-  return strcmp (a, b);
-}
diff --git a/newlib/libc/string/strcpy.c b/newlib/libc/string/strcpy.c
deleted file mode 100644
index 905b2541c..000000000
--- a/newlib/libc/string/strcpy.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-FUNCTION
-	<<strcpy>>---copy string
-
-INDEX
-	strcpy
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strcpy(char *<[dst]>, const char *<[src]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strcpy(<[dst]>, <[src]>)
-	char *<[dst]>;
-	char *<[src]>;
-
-DESCRIPTION
-	<<strcpy>> copies the string pointed to by <[src]>
-	(including the terminating null character) to the array
-	pointed to by <[dst]>.
-
-RETURNS
-	This function returns the initial value of <[dst]>.
-
-PORTABILITY
-<<strcpy>> is ANSI C.
-
-<<strcpy>> requires no supporting OS subroutines.
-
-QUICKREF
-	strcpy ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/*SUPPRESS 560*/
-/*SUPPRESS 530*/
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-char*
-_DEFUN (strcpy, (dst0, src0),
-	char *dst0 _AND
-	_CONST char *src0)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *s = dst0;
-
-  while (*dst0++ = *src0++)
-    ;
-
-  return s;
-#else
-  char *dst = dst0;
-  _CONST char *src = src0;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-
-  /* If SRC or DEST is unaligned, then copy bytes.  */
-  if (!UNALIGNED (src, dst))
-    {
-      aligned_dst = (long*)dst;
-      aligned_src = (long*)src;
-
-      /* SRC and DEST are both "long int" aligned, try to do "long int"
-         sized copies.  */
-      while (!DETECTNULL(*aligned_src))
-        {
-          *aligned_dst++ = *aligned_src++;
-        }
-
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-    }
-
-  while (*dst++ = *src++)
-    ;
-  return dst0;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strcspn.c b/newlib/libc/string/strcspn.c
deleted file mode 100644
index fe68b8f51..000000000
--- a/newlib/libc/string/strcspn.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-FUNCTION
-	<<strcspn>>---count chars not in string
-
-INDEX
-	strcspn
-
-ANSI_SYNOPSIS
-	size_t strcspn(const char *<[s1]>, const char *<[s2]>);
-
-TRAD_SYNOPSIS
-	size_t strcspn(<[s1]>, <[s2]>)
-	char *<[s1]>;
-	char *<[s2]>;
-
-DESCRIPTION
-	This function computes the length of the initial part of
-	the string pointed to by <[s1]> which consists entirely of
-	characters <[NOT]> from the string pointed to by <[s2]>
-	(excluding the terminating null character).
-
-RETURNS
-	<<strcspn>> returns the length of the substring found.
-
-PORTABILITY
-<<strcspn>> is ANSI C.
-
-<<strcspn>> requires no supporting OS subroutines.
- */
-
-#include <string.h>
-
-size_t
-_DEFUN (strcspn, (s1, s2),
-	_CONST char *s1 _AND
-	_CONST char *s2)
-{
-  _CONST char *s = s1;
-  _CONST char *c;
-
-  while (*s1)
-    {
-      for (c = s2; *c; c++)
-	{
-	  if (*s1 == *c)
-	    break;
-	}
-      if (*c)
-	break;
-      s1++;
-    }
-
-  return s1 - s;
-}
diff --git a/newlib/libc/string/strdup.c b/newlib/libc/string/strdup.c
deleted file mode 100644
index dbb069264..000000000
--- a/newlib/libc/string/strdup.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _REENT_ONLY
-
-#include <reent.h>
-#include <stdlib.h>
-#include <string.h>
-
-char *
-_DEFUN (strdup, (str), _CONST char *str)
-{
-  return _strdup_r (_REENT, str);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/string/strdup_r.c b/newlib/libc/string/strdup_r.c
deleted file mode 100644
index ef77a58eb..000000000
--- a/newlib/libc/string/strdup_r.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <reent.h>
-#include <stdlib.h>
-#include <string.h>
-
-char *
-_DEFUN (_strdup_r, (reent_ptr, str), 
-        struct _reent *reent_ptr  _AND
-        _CONST char   *str)
-{
-  size_t len = strlen (str) + 1;
-  char *copy = _malloc_r (reent_ptr, len);
-  if (copy)
-    {
-      memcpy (copy, str, len);
-    }
-  return copy;
-}
diff --git a/newlib/libc/string/strerror.c b/newlib/libc/string/strerror.c
deleted file mode 100644
index 8bea4b768..000000000
--- a/newlib/libc/string/strerror.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/***
-**** CAUTION!!! KEEP DOC CONSISTENT---if you change text of a message
-****            here, change two places:
-****            1) the leading doc section (alphabetized by macro)
-****            2) the real text inside switch(errnum)
-***/
-
-/*
-FUNCTION
-	<<strerror>>---convert error number to string
-
-INDEX
-	strerror
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strerror(int <[errnum]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strerror(<[errnum]>)
-	int <[errnum]>;
-
-DESCRIPTION
-<<strerror>> converts the error number <[errnum]> into a
-string.  The value of <[errnum]> is usually a copy of <<errno>>.
-If <<errnum>> is not a known error number, the result points to an
-empty string.
-
-This implementation of <<strerror>> prints out the following strings
-for each of the values defined in `<<errno.h>>':
-
-o+
-o E2BIG
-Arg list too long
-
-o EACCES
-Permission denied
-
-o EADDRINUSE
-Address already in use
-
-o EADV
-Advertise error
-
-o EAFNOSUPPORT
-Address family not supported by protocol family
-
-o EAGAIN
-No more processes
-
-o EALREADY
-Socket already connected
-
-o EBADF
-Bad file number
-
-o EBADMSG
-Bad message
-
-o EBUSY
-Device or resource busy
-
-o ECHILD
-No children
-
-o ECOMM
-Communication error
-
-o ECONNABORTED
-Software caused connection abort
-
-o ECONNREFUSED
-Connection refused
-
-o EDEADLK
-Deadlock
-
-o EDESTADDRREQ
-Destination address required
-
-o EEXIST
-File exists
-
-o EDOM
-Math argument
-
-o EFAULT
-Bad address
-
-o EFBIG
-File too large
-
-o EHOSTDOWN
-Host is down
-
-o EHOSTUNREACH
-Host is unreachable
-
-o EIDRM
-Identifier removed
-
-o EINPROGRESS
-Connection already in progress
-
-o EINTR
-Interrupted system call
-
-o EINVAL
-Invalid argument
-
-o EIO
-I/O error
-
-o EISCONN
-Socket is already connected
-
-o EISDIR
-Is a directory
-
-o ELIBACC
-Cannot access a needed shared library
-
-o ELIBBAD
-Accessing a corrupted shared library
-
-o ELIBEXEC
-Cannot exec a shared library directly
-
-o ELIBMAX
-Attempting to link in more shared libraries than system limit
-
-o ELIBSCN
-<<.lib>> section in a.out corrupted
-
-o EMFILE
-Too many open files
-
-o EMLINK
-Too many links
-
-o EMSGSIZE
-Message too long
-
-o EMULTIHOP
-Multihop attempted
-
-o ENAMETOOLONG
-File or path name too long
-
-o ENETDOWN
-Network interface not configured
-
-o ENETUNREACH
-Network is unreachable
-
-o ENFILE
-Too many open files in system
-
-o ENODEV
-No such device
-
-o ENOENT
-No such file or directory
-
-o ENOEXEC
-Exec format error
-
-o ENOLCK
-No lock
-
-o ENOLINK
-Virtual circuit is gone
-
-o ENOMEM
-Not enough space
-
-o ENOMSG
-No message of desired type
-
-o ENONET
-Machine is not on the network
-
-o ENOPKG
-No package
-
-o ENOPROTOOPT
-Protocol not available
-
-o ENOSPC
-No space left on device
-
-o ENOSR
-No stream resources
-
-o ENOSTR
-Not a stream
-
-o ENOSYS
-Function not implemented
-
-o ENOTBLK
-Block device required
-
-o ENOTCONN
-Socket is not connected
-
-o ENOTDIR
-Not a directory
-
-o ENOTEMPTY
-Directory not empty
-
-o ENOTSOCK
-Socket operation on non-socket
-
-o ENOTSUP
-Not supported
-
-o ENOTTY
-Not a character device
-
-o ENXIO
-No such device or address
-
-o EPERM
-Not owner
-
-o EPIPE
-Broken pipe
-
-o EPROTO
-Protocol error
-
-o EPROTOTYPE
-Protocol wrong type for socket
-
-o EPROTONOSUPPORT
-Unknown protocol
-
-o ERANGE
-Result too large
-
-o EREMOTE
-Resource is remote
-
-o EROFS
-Read-only file system
-
-o ESHUTDOWN
-Can't send after socket shutdown
-
-o ESOCKTNOSUPPORT
-Socket type not supported
-
-o ESPIPE
-Illegal seek
-
-o ESRCH
-No such process
-
-o ESRMNT
-Srmount error
-
-o ETIME
-Stream ioctl timeout
-
-o ETIMEDOUT
-Connection timed out
-
-o ETXTBSY
-Text file busy
-
-o EXDEV
-Cross-device link
-
-o-
-
-RETURNS
-This function returns a pointer to a string.  Your application must
-not modify that string.
-
-PORTABILITY
-ANSI C requires <<strerror>>, but does not specify the strings used
-for each error number.
-
-Although this implementation of <<strerror>> is reentrant, ANSI C
-declares that subsequent calls to <<strerror>> may overwrite the
-result string; therefore portable code cannot depend on the reentrancy
-of this subroutine.
-
-This implementation of <<strerror>> provides for user-defined
-extensibility.  <<errno.h>> defines <[__ELASTERROR]>, which can be
-used as a base for user-defined error values.  If the user supplies a
-routine named <<_user_strerror>>, and <[errnum]> passed to
-<<strerror>> does not match any of the supported values,
-<<_user_strerror>> is called with <[errnum]> as its argument.
-
-<<_user_strerror>> takes one argument of type <[int]>, and returns a
-character pointer.  If <[errnum]> is unknown to <<_user_strerror>>,
-<<_user_strerror>> returns <[NULL]>.  The default <<_user_strerror>>
-returns <[NULL]> for all input values.
-
-<<strerror>> requires no supporting OS subroutines.
-
-QUICKREF
-	strerror ansi pure
-*/
-
-#include <errno.h>
-#include <string.h>
-
-char *
-_DEFUN (strerror, (errnum),
-	int errnum)
-{
-  char *error;
-  extern char *_user_strerror _PARAMS ((int));
-
-  switch (errnum)
-    {
-/* go32 defines EPERM as EACCES */
-#if defined (EPERM) && (!defined (EACCES) || (EPERM != EACCES))
-    case EPERM:
-      error = "Not owner";
-      break;
-#endif
-#ifdef ENOENT
-    case ENOENT:
-      error = "No such file or directory";
-      break;
-#endif
-#ifdef ESRCH
-    case ESRCH:
-      error = "No such process";
-      break;
-#endif
-#ifdef EINTR
-    case EINTR:
-      error = "Interrupted system call";
-      break;
-#endif
-#ifdef EIO
-    case EIO:
-      error = "I/O error";
-      break;
-#endif
-/* go32 defines ENXIO as ENODEV */
-#if defined (ENXIO) && (!defined (ENODEV) || (ENXIO != ENODEV))
-    case ENXIO:
-      error = "No such device or address";
-      break;
-#endif
-#ifdef E2BIG
-    case E2BIG:
-      error = "Arg list too long";
-      break;
-#endif
-#ifdef ENOEXEC
-    case ENOEXEC:
-      error = "Exec format error";
-      break;
-#endif
-#ifdef EALREADY
-    case EALREADY:
-      error = "Socket already connected";
-      break;
-#endif
-#ifdef EBADF
-    case EBADF:
-      error = "Bad file number";
-      break;
-#endif
-#ifdef ECHILD
-    case ECHILD:
-      error = "No children";
-      break;
-#endif
-#ifdef EDESTADDRREQ
-    case EDESTADDRREQ:
-      error = "Destination address required";
-      break;
-#endif
-#ifdef EAGAIN
-    case EAGAIN:
-      error = "No more processes";
-      break;
-#endif
-#ifdef ENOMEM
-    case ENOMEM:
-      error = "Not enough space";
-      break;
-#endif
-#ifdef EACCES
-    case EACCES:
-      error = "Permission denied";
-      break;
-#endif
-#ifdef EFAULT
-    case EFAULT:
-      error = "Bad address";
-      break;
-#endif
-#ifdef ENOTBLK
-    case ENOTBLK:
-      error = "Block device required";
-      break;
-#endif
-#ifdef EBUSY
-    case EBUSY:
-      error = "Device or resource busy";
-      break;
-#endif
-#ifdef EEXIST
-    case EEXIST:
-      error = "File exists";
-      break;
-#endif
-#ifdef EXDEV
-    case EXDEV:
-      error = "Cross-device link";
-      break;
-#endif
-#ifdef ENODEV
-    case ENODEV:
-      error = "No such device";
-      break;
-#endif
-#ifdef ENOTDIR
-    case ENOTDIR:
-      error = "Not a directory";
-      break;
-#endif
-#ifdef EHOSTDOWN
-    case EHOSTDOWN:
-      error = "Host is down";
-      break;
-#endif
-#ifdef EINPROGRESS 
-    case EINPROGRESS:
-      error = "Connection already in progress";
-      break;
-#endif
-#ifdef EISDIR
-    case EISDIR:
-      error = "Is a directory";
-      break;
-#endif
-#ifdef EINVAL
-    case EINVAL:
-      error = "Invalid argument";
-      break;
-#endif
-#ifdef ENETDOWN
-    case ENETDOWN:
-      error = "Network interface is not configured";
-      break;
-#endif
-#ifdef ENFILE
-    case ENFILE:
-      error = "Too many open files in system";
-      break;
-#endif
-#ifdef EMFILE
-    case EMFILE:
-      error = "Too many open files";
-      break;
-#endif
-#ifdef ENOTTY
-    case ENOTTY:
-      error = "Not a character device";
-      break;
-#endif
-#ifdef ETXTBSY
-    case ETXTBSY:
-      error = "Text file busy";
-      break;
-#endif
-#ifdef EFBIG
-    case EFBIG:
-      error = "File too large";
-      break;
-#endif
-#ifdef EHOSTUNREACH
-    case EHOSTUNREACH:
-      error = "Host is unreachable";
-      break;
-#endif
-#ifdef ENOSPC
-    case ENOSPC:
-      error = "No space left on device";
-      break;
-#endif
-#ifdef ENOTSUP
-    case ENOTSUP:
-      error = "Not supported";
-      break;
-#endif
-#ifdef ESPIPE
-    case ESPIPE:
-      error = "Illegal seek";
-      break;
-#endif
-#ifdef EROFS
-    case EROFS:
-      error = "Read-only file system";
-      break;
-#endif
-#ifdef EMLINK
-    case EMLINK:
-      error = "Too many links";
-      break;
-#endif
-#ifdef EPIPE
-    case EPIPE:
-      error = "Broken pipe";
-      break;
-#endif
-#ifdef EDOM
-    case EDOM:
-      error = "Math argument";
-      break;
-#endif
-#ifdef ERANGE
-    case ERANGE:
-      error = "Result too large";
-      break;
-#endif
-#ifdef ENOMSG
-    case ENOMSG:
-      error = "No message of desired type";
-      break;
-#endif
-#ifdef EIDRM
-    case EIDRM:
-      error = "Identifier removed";
-      break;
-#endif
-#ifdef EDEADLK
-    case EDEADLK:
-      error = "Deadlock";
-      break;
-#endif
-#ifdef ENETUNREACH 
-    case  ENETUNREACH:
-      error = "Network is unreachable";
-      break;
-#endif
-#ifdef ENOLCK
-    case ENOLCK:
-      error = "No lock";
-      break;
-#endif
-#ifdef ENOSTR
-    case ENOSTR:
-      error = "Not a stream";
-      break;
-#endif
-#ifdef ETIME
-    case ETIME:
-      error = "Stream ioctl timeout";
-      break;
-#endif
-#ifdef ENOSR
-    case ENOSR:
-      error = "No stream resources";
-      break;
-#endif
-#ifdef ENONET
-    case ENONET:
-      error = "Machine is not on the network";
-      break;
-#endif
-#ifdef ENOPKG
-    case ENOPKG:
-      error = "No package";
-      break;
-#endif
-#ifdef EREMOTE
-    case EREMOTE:
-      error = "Resource is remote";
-      break;
-#endif
-#ifdef ENOLINK
-    case ENOLINK:
-      error = "Virtual circuit is gone";
-      break;
-#endif
-#ifdef EADV
-    case EADV:
-      error = "Advertise error";
-      break;
-#endif
-#ifdef ESRMNT
-    case ESRMNT:
-      error = "Srmount error";
-      break;
-#endif
-#ifdef ECOMM
-    case ECOMM:
-      error = "Communication error";
-      break;
-#endif
-#ifdef EPROTO
-    case EPROTO:
-      error = "Protocol error";
-      break;
-#endif
-#ifdef EPROTONOSUPPORT
-    case EPROTONOSUPPORT:
-      error = "Unknown protocol";
-      break;
-#endif
-#ifdef EMULTIHOP
-    case EMULTIHOP:
-      error = "Multihop attempted";
-      break;
-#endif
-#ifdef EBADMSG
-    case EBADMSG:
-      error = "Bad message";
-      break;
-#endif
-#ifdef ELIBACC
-    case ELIBACC:
-      error = "Cannot access a needed shared library";
-      break;
-#endif
-#ifdef ELIBBAD
-    case ELIBBAD:
-      error = "Accessing a corrupted shared library";
-      break;
-#endif
-#ifdef ELIBSCN
-    case ELIBSCN:
-      error = ".lib section in a.out corrupted";
-      break;
-#endif
-#ifdef ELIBMAX
-    case ELIBMAX:
-      error = "Attempting to link in more shared libraries than system limit";
-      break;
-#endif
-#ifdef ELIBEXEC
-    case ELIBEXEC:
-      error = "Cannot exec a shared library directly";
-      break;
-#endif
-#ifdef ENOSYS
-    case ENOSYS:
-      error = "Function not implemented";
-      break;
-#endif
-#ifdef ENMFILE
-    case ENMFILE:
-      error = "No more files";
-      break;
-#endif
-#ifdef ENOTEMPTY
-    case ENOTEMPTY:
-      error = "Directory not empty";
-      break;
-#endif
-#ifdef ENAMETOOLONG
-    case ENAMETOOLONG:
-      error = "File or path name too long";
-      break;
-#endif
-#ifdef ELOOP
-    case ELOOP:
-      error = "Too many symbolic links";
-      break;
-#endif
-#ifdef ENOBUFS
-    case ENOBUFS:
-      error = "No buffer space available";
-      break;
-#endif
-#ifdef EAFNOSUPPORT
-    case EAFNOSUPPORT:
-      error = "Address family not supported by protocol family";
-      break;
-#endif
-#ifdef EPROTOTYPE
-    case EPROTOTYPE:
-      error = "Protocol wrong type for socket";
-      break;
-#endif
-#ifdef ENOTSOCK
-    case ENOTSOCK:
-      error = "Socket operation on non-socket";
-      break;
-#endif
-#ifdef ENOPROTOOPT
-    case ENOPROTOOPT:
-      error = "Protocol not available";
-      break;
-#endif
-#ifdef ESHUTDOWN
-    case ESHUTDOWN:
-      error = "Can't send after socket shutdown";
-      break;
-#endif
-#ifdef ECONNREFUSED
-    case ECONNREFUSED:
-      error = "Connection refused";
-      break;
-#endif
-#ifdef EADDRINUSE
-    case EADDRINUSE:
-      error = "Address already in use";
-      break;
-#endif
-#ifdef ECONNABORTED
-    case ECONNABORTED:
-      error = "Software caused connection abort";
-      break;
-#endif
-#if (defined(EWOULDBLOCK) && (!defined (EAGAIN) || (EWOULDBLOCK != EAGAIN)))
-    case EWOULDBLOCK:
-        error = "Operation would block";
-        break;
-#endif
-#ifdef ENOTCONN
-    case ENOTCONN:
-        error = "Socket is not connected";
-        break;
-#endif
-#ifdef ESOCKTNOSUPPORT
-    case ESOCKTNOSUPPORT:
-        error = "Socket type not supported";
-        break;
-#endif
-#ifdef EISCONN
-    case EISCONN:
-        error = "Socket is already connected";
-        break;
-#endif
-#if defined(EOPNOTSUPP) && (!defined(ENOTSUP) || (ENOTSUP != EOPNOTSUPP))
-    case EOPNOTSUPP:
-        error = "Operation not supported on socket";
-        break;
-#endif
-#ifdef EMSGSIZE
-    case EMSGSIZE:
-        error = "Message too long";
-        break;
-#endif
-#ifdef ETIMEDOUT
-    case ETIMEDOUT:
-        error = "Connection timed out";
-        break;
-#endif
-    default:
-      if ((error = _user_strerror (errnum)) == 0)
-	error = "";
-      break;
-    }
-
-  return error;
-}
diff --git a/newlib/libc/string/strerror_r.c b/newlib/libc/string/strerror_r.c
deleted file mode 100644
index 956a1f485..000000000
--- a/newlib/libc/string/strerror_r.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-FUNCTION
-	<<strerror_r>>---convert error number to string and copy to buffer
-
-INDEX
-	strerror_r
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strerror_r(int <[errnum]>, char *<[buffer]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strerror_r(<[errnum]>, <[buffer]>, <[n]>)
-	int <[errnum]>;
-	char *<[buffer]>;
-	size_t <[n]>;
-
-DESCRIPTION
-<<strerror_r>> converts the error number <[errnum]> into a
-string and copies the result into the supplied <[buffer]> for
-a length up to <[n]>, including the NUL terminator. The value of 
-<[errnum]> is usually a copy of <<errno>>.  If <<errnum>> is not a known 
-error number, the result is the empty string.
-
-See <<strerror>> for how strings are mapped to <<errnum>>.
-
-RETURNS
-This function returns a pointer to a string.  Your application must
-not modify that string.
-
-PORTABILITY
-<<strerror_r>> is a gnu extension.
-
-<<strerror_r>> requires no supporting OS subroutines.
-
-*/
-
-#undef __STRICT_ANSI__
-#include <errno.h>
-#include <string.h>
-
-char *
-_DEFUN (strerror_r, (errnum, buffer, n),
-	int errnum _AND
-	char *buffer _AND
-	size_t n)
-{
-  char *error;
-  error = strerror (errnum);
-
-  return strncpy (buffer, (const char *)error, n);
-}
diff --git a/newlib/libc/string/strings.tex b/newlib/libc/string/strings.tex
deleted file mode 100644
index 7f9106ee9..000000000
--- a/newlib/libc/string/strings.tex
+++ /dev/null
@@ -1,145 +0,0 @@
-@node Strings
-@chapter Strings and Memory (@file{string.h})
-
-This chapter describes string-handling functions and functions for
-managing areas of memory.  The corresponding declarations are in
-@file{string.h}.
-
-@menu
-* bcmp::        Compare two memory areas
-* bcopy::       Copy memory regions
-* bzero::       Initialize memory to zero
-* index::       Search for character in string
-* memccpy::     Copy memory regions up to end-token
-* memchr::      Find character in memory
-* memcmp::      Compare two memory areas
-* memcpy::      Copy memory regions
-* memmove::     Move possibly overlapping memory
-* mempcpy::	Copy memory regions and locate end
-* memset::      Set an area of memory
-* rindex::      Reverse search for character in string
-* strcasecmp::	Compare strings ignoring case
-* strcat::      Concatenate strings
-* strchr::      Search for character in string
-* strcmp::      Character string compare
-* strcoll::     Locale specific character string compare
-* strcpy::      Copy string
-* strcspn::     Count chars not in string
-* strerror::    Convert error number to string
-* strlen::      Character string length
-* strlwr::	Convert string to lower case
-* strncasecmp::	Compare strings ignoring case
-* strncat::     Concatenate strings
-* strncmp::     Character string compare
-* strncpy::     Counted copy string
-* strpbrk::     Find chars in string
-* strrchr::     Reverse search for character in string
-* strspn::      Find initial match
-* strstr::      Find string segment
-* strtok::      Get next token from a string
-* strupr::	Convert string to upper case
-* strxfrm::     Transform string
-* swab::        Swap adjacent bytes
-@end menu
-
-@page
-@include string/bcmp.def
-
-@page
-@include string/bcopy.def
-
-@page
-@include string/bzero.def
-
-@page
-@include string/index.def
-
-@page
-@include string/memccpy.def
-
-@page
-@include string/memchr.def
-
-@page
-@include string/memcmp.def
-
-@page
-@include string/memcpy.def
-
-@page
-@include string/memmove.def
-
-@page
-@include string/mempcpy.def
-
-@page
-@include string/memset.def
-
-@page
-@include string/rindex.def
-
-@page
-@include string/strcasecmp.def
-
-@page
-@include string/strcat.def
-
-@page
-@include string/strchr.def
-
-@page
-@include string/strcmp.def
-
-@page
-@include string/strcoll.def
-
-@page
-@include string/strcpy.def
-
-@page
-@include string/strcspn.def
-
-@page
-@include string/strerror.def
-
-@page
-@include string/strlen.def
-
-@page
-@include string/strlwr.def
-
-@page
-@include string/strncasecmp.def
-
-@page
-@include string/strncat.def
-
-@page
-@include string/strncmp.def
-
-@page
-@include string/strncpy.def
-
-@page
-@include string/strpbrk.def
-
-@page
-@include string/strrchr.def
-
-@page
-@include string/strspn.def
-
-@page
-@include string/strstr.def
-
-@page
-@include string/strtok.def
-
-@page
-@include string/strupr.def
-
-@page
-@include string/strxfrm.def
-
-@page
-@include string/swab.def
diff --git a/newlib/libc/string/strlcat.c b/newlib/libc/string/strlcat.c
deleted file mode 100644
index 0c47bd527..000000000
--- a/newlib/libc/string/strlcat.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*      $OpenBSD: strlcat.c,v 1.8 2001/05/13 15:40:15 deraadt Exp $        */
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcat.c,v 1.8 2001/05/13 15:40:15 deraadt Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Appends src to string dst of size siz (unlike strncat, siz is the
- * full size of dst, not space left).  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz <= strlen(dst)).
- * Returns strlen(src) + MIN(siz, strlen(initial dst)).
- * If retval >= siz, truncation occurred.
- */
-size_t
-_DEFUN (strlcat, (dst, src, siz),
-	char *dst _AND
-	_CONST char *src _AND
-	size_t siz)
-{
-        register char *d = dst;
-        register const char *s = src;
-        register size_t n = siz;
-        size_t dlen;
-
-        /* Find the end of dst and adjust bytes left but don't go past end */
-        while (n-- != 0 && *d != '\0')
-                d++;
-        dlen = d - dst;
-        n = siz - dlen;
-
-        if (n == 0)
-                return(dlen + strlen(s));
-        while (*s != '\0') {
-                if (n != 1) {
-                        *d++ = *s;
-                        n--;
-                }
-                s++;
-        }
-        *d = '\0';
-
-        return(dlen + (s - src));        /* count does not include NUL */
-}
-
diff --git a/newlib/libc/string/strlcpy.c b/newlib/libc/string/strlcpy.c
deleted file mode 100644
index c31001642..000000000
--- a/newlib/libc/string/strlcpy.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*      $OpenBSD: strlcpy.c,v 1.5 2001/05/13 15:40:16 deraadt Exp $        */
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcpy.c,v 1.5 2001/05/13 15:40:16 deraadt Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Copy src to string dst of size siz.  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz == 0).
- * Returns strlen(src); if retval >= siz, truncation occurred.
- */
-size_t
-_DEFUN (strlcpy, (dst, src, siz),
-	char *dst _AND
-	_CONST char *src _AND
-	size_t siz)
-{
-        register char *d = dst;
-        register const char *s = src;
-        register size_t n = siz;
-
-        /* Copy as many bytes as will fit */
-        if (n != 0 && --n != 0) {
-                do {
-                        if ((*d++ = *s++) == 0)
-                                break;
-                } while (--n != 0);
-        }
-
-        /* Not enough room in dst, add NUL and traverse rest of src */
-        if (n == 0) {
-                if (siz != 0)
-                        *d = '\0';                /* NUL-terminate dst */
-                while (*s++)
-                        ;
-        }
-
-        return(s - src - 1);        /* count does not include NUL */
-}
-
diff --git a/newlib/libc/string/strlen.c b/newlib/libc/string/strlen.c
deleted file mode 100644
index 4249e14c7..000000000
--- a/newlib/libc/string/strlen.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* 
-FUNCTION
-	<<strlen>>---character string length
-	
-INDEX
-	strlen
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	size_t strlen(const char *<[str]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	size_t strlen(<[str]>)
-	char *<[src]>;
-
-DESCRIPTION
-	The <<strlen>> function works out the length of the string
-	starting at <<*<[str]>>> by counting chararacters until it
-	reaches a <<NULL>> character.
-
-RETURNS
-	<<strlen>> returns the character count.
-
-PORTABILITY
-<<strlen>> is ANSI C.
-
-<<strlen>> requires no supporting OS subroutines.
-
-QUICKREF
-	strlen ansi pure
-*/
-
-#include <_ansi.h>
-#include <string.h>
-#include <limits.h>
-
-#define LBLOCKSIZE   (sizeof (long))
-#define UNALIGNED(X) ((long)X & (LBLOCKSIZE - 1))
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-size_t
-_DEFUN (strlen, (str),
-	_CONST char *str)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  _CONST char *start = str;
-
-  while (*str)
-    str++;
-
-  return str - start;
-#else
-  _CONST char *start = str;
-  unsigned long *aligned_addr;
-
-  if (!UNALIGNED (str))
-    {
-      /* If the string is word-aligned, we can check for the presence of 
-         a null in each word-sized block.  */
-      aligned_addr = (unsigned long*)str;
-      while (!DETECTNULL (*aligned_addr))
-        aligned_addr++;
-
-      /* Once a null is detected, we check each byte in that block for a
-         precise position of the null.  */
-      str = (char*)aligned_addr;
-    }
- 
-  while (*str)
-    str++;
-  return str - start;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strlwr.c b/newlib/libc/string/strlwr.c
deleted file mode 100644
index cf0d45f71..000000000
--- a/newlib/libc/string/strlwr.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-FUNCTION
-	<<strlwr>>---force string to lower case
-	
-INDEX
-	strlwr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strlwr(char *<[a]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strlwr(<[a]>)
-	char *<[a]>;
-
-DESCRIPTION
-	<<strlwr>> converts each characters in the string at <[a]> to
-	lower case.
-
-RETURNS
-	<<strlwr>> returns its argument, <[a]>.
-
-PORTABILITY
-<<strlwr>> is not widely portable.
-
-<<strlwr>> requires no supporting OS subroutines.
-
-QUICKREF
-	strlwr
-*/
-
-#include <string.h>
-#include <ctype.h>
-
-char *
-strlwr (a)
-     char *a;
-{
-  char *ret = a;
-
-  while (*a != '\0')
-    {
-      if (isupper (*a))
-	*a = tolower (*a);
-      ++a;
-    }
-
-  return ret;
-}
diff --git a/newlib/libc/string/strncasecmp.c b/newlib/libc/string/strncasecmp.c
deleted file mode 100644
index 28c6cc44f..000000000
--- a/newlib/libc/string/strncasecmp.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-FUNCTION
-	<<strncasecmp>>---case insensitive character string compare
-	
-INDEX
-	strncasecmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int strncasecmp(const char *<[a]>, const char * <[b]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int strncasecmp(<[a]>, <[b]>, <[length]>)
-	char *<[a]>;
-	char *<[b]>;
-	size_t <[length]>
-
-DESCRIPTION
-	<<strncasecmp>> compares up to <[length]> characters
-	from the string at <[a]> to the string at <[b]> in a 
-	case-insensitive manner.
-
-RETURNS
-
-	If <<*<[a]>>> sorts lexicographically after <<*<[b]>>> (after
-	both are converted to upper case), <<strncasecmp>> returns a
-	number greater than zero.  If the two strings are equivalent,
-	<<strncasecmp>> returns zero.  If <<*<[a]>>> sorts
-	lexicographically before <<*<[b]>>>, <<strncasecmp>> returns a
-	number less than zero.
-
-PORTABILITY
-<<strncasecmp>> is in the Berkeley Software Distribution.
-
-<<strncasecmp>> requires no supporting OS subroutines. It uses
-tolower() from elsewhere in this library.
-
-QUICKREF
-	strncasecmp
-*/
-
-#include <string.h>
-#include <ctype.h>
-
-int 
-_DEFUN (strncasecmp, (s1, s2, n),
-	_CONST char *s1 _AND
-	_CONST char *s2 _AND
-	size_t n)
-{
-  if (n == 0)
-    return 0;
-
-  while (n-- != 0 && tolower(*s1) == tolower(*s2))
-    {
-      if (n == 0 || *s1 == '\0' || *s2 == '\0')
-	break;
-      s1++;
-      s2++;
-    }
-
-  return tolower(*(unsigned char *) s1) - tolower(*(unsigned char *) s2);
-}
diff --git a/newlib/libc/string/strncat.c b/newlib/libc/string/strncat.c
deleted file mode 100644
index 57ca068eb..000000000
--- a/newlib/libc/string/strncat.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
-FUNCTION
-	<<strncat>>---concatenate strings
-
-INDEX
-	strncat
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strncat(char *<[dst]>, const char *<[src]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strncat(<[dst]>, <[src]>, <[length]>)
-	char *<[dst]>;
-	char *<[src]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	<<strncat>> appends not more than <[length]> characters from
-	the string pointed to by <[src]> (including the	terminating
-	null character) to the end of the string pointed to by
-	<[dst]>.  The initial character of <[src]> overwrites the null
-	character at the end of <[dst]>.  A terminating null character
-	is always appended to the result
-
-WARNINGS
-	Note that a null is always appended, so that if the copy is
-	limited by the <[length]> argument, the number of characters
-	appended to <[dst]> is <<n + 1>>.
-	
-
-RETURNS
-	This function returns the initial value of <[dst]>
-
-PORTABILITY
-<<strncat>> is ANSI C.
-
-<<strncat>> requires no supporting OS subroutines.
-
-QUICKREF
-	strncat ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if X is aligned on a "long" boundary.  */
-#define ALIGNED(X) \
-  (((long)X & (sizeof (long) - 1)) == 0)
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-char *
-_DEFUN (strncat, (s1, s2, n),
-	char *s1 _AND
-	_CONST char *s2 _AND
-	size_t n)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *s = s1;
-
-  while (*s1)
-    s1++;
-  while (n-- != 0 && (*s1++ = *s2++))
-    {
-      if (n == 0)
-	*s1 = '\0';
-    }
-
-  return s;
-#else
-  char *s = s1;
-
-  /* Skip over the data in s1 as quickly as possible.  */
-  if (ALIGNED (s1))
-    {
-      unsigned long *aligned_s1 = (unsigned long *)s1;
-      while (!DETECTNULL (*aligned_s1))
-	aligned_s1++;
-
-      s1 = (char *)aligned_s1;
-    }
-
-  while (*s1)
-    s1++;
-
-  /* s1 now points to the its trailing null character, now copy
-     up to N bytes from S2 into S1 stopping if a NULL is encountered
-     in S2.
-
-     It is not safe to use strncpy here since it copies EXACTLY N
-     characters, NULL padding if necessary.  */
-  while (n-- != 0 && (*s1++ = *s2++))
-    {
-      if (n == 0)
-	*s1 = '\0';
-    }
-	
-  return s;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strncmp.c b/newlib/libc/string/strncmp.c
deleted file mode 100644
index 9801b7d92..000000000
--- a/newlib/libc/string/strncmp.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
-FUNCTION
-	<<strncmp>>---character string compare
-	
-INDEX
-	strncmp
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	int strncmp(const char *<[a]>, const char * <[b]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	int strncmp(<[a]>, <[b]>, <[length]>)
-	char *<[a]>;
-	char *<[b]>;
-	size_t <[length]>
-
-DESCRIPTION
-	<<strncmp>> compares up to <[length]> characters
-	from the string at <[a]> to the string at <[b]>.
-
-RETURNS
-	If <<*<[a]>>> sorts lexicographically after <<*<[b]>>>,
-	<<strncmp>> returns a number greater than zero.  If the two
-	strings are equivalent, <<strncmp>> returns zero.  If <<*<[a]>>>
-	sorts lexicographically before <<*<[b]>>>, <<strncmp>> returns a
-	number less than zero.
-
-PORTABILITY
-<<strncmp>> is ANSI C.
-
-<<strncmp>> requires no supporting OS subroutines.
-
-QUICKREF
-	strncmp ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-/* DETECTNULL returns nonzero if (long)X contains a NULL byte. */
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-int 
-_DEFUN (strncmp, (s1, s2, n),
-	_CONST char *s1 _AND
-	_CONST char *s2 _AND
-	size_t n)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  if (n == 0)
-    return 0;
-
-  while (n-- != 0 && *s1 == *s2)
-    {
-      if (n == 0 || *s1 == '\0')
-	break;
-      s1++;
-      s2++;
-    }
-
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-#else
-  unsigned long *a1;
-  unsigned long *a2;
-
-  if (n == 0)
-    return 0;
-
-  /* If s1 or s2 are unaligned, then compare bytes. */
-  if (!UNALIGNED (s1, s2))
-    {
-      /* If s1 and s2 are word-aligned, compare them a word at a time. */
-      a1 = (unsigned long*)s1;
-      a2 = (unsigned long*)s2;
-      while (n >= sizeof (long) && *a1 == *a2)
-        {
-          n -= sizeof (long);
-
-          /* If we've run out of bytes or hit a null, return zero
-	     since we already know *a1 == *a2.  */
-          if (n == 0 || DETECTNULL (*a1))
-	    return 0;
-
-          a1++;
-          a2++;
-        }
-
-      /* A difference was detected in last few bytes of s1, so search bytewise */
-      s1 = (char*)a1;
-      s2 = (char*)a2;
-    }
-
-  while (n-- > 0 && *s1 == *s2)
-    {
-      /* If we've run out of bytes or hit a null, return zero
-	 since we already know *s1 == *s2.  */
-      if (n == 0 || *s1 == '\0')
-	return 0;
-      s1++;
-      s2++;
-    }
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strncpy.c b/newlib/libc/string/strncpy.c
deleted file mode 100644
index 7c1973ba6..000000000
--- a/newlib/libc/string/strncpy.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
-FUNCTION
-	<<strncpy>>---counted copy string
-
-INDEX
-	strncpy
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strncpy(char *<[dst]>, const char *<[src]>, size_t <[length]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strncpy(<[dst]>, <[src]>, <[length]>)
-	char *<[dst]>;
-	char *<[src]>;
-	size_t <[length]>;
-
-DESCRIPTION
-	<<strncpy>> copies not more than <[length]> characters from the
-	the string pointed to by <[src]> (including the terminating
-	null character) to the array pointed to by <[dst]>.  If the
-	string pointed to by <[src]> is shorter than <[length]>
-	characters, null characters are appended to the destination
-	array until a total of <[length]> characters have been
-	written.
-
-RETURNS
-	This function returns the initial value of <[dst]>.
-
-PORTABILITY
-<<strncpy>> is ANSI C.
-
-<<strncpy>> requires no supporting OS subroutines.
-
-QUICKREF
-	strncpy ansi pure
-*/
-
-#include <string.h>
-#include <limits.h>
-
-/*SUPPRESS 560*/
-/*SUPPRESS 530*/
-
-/* Nonzero if either X or Y is not aligned on a "long" boundary.  */
-#define UNALIGNED(X, Y) \
-  (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
-
-#if LONG_MAX == 2147483647L
-#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
-#else
-#if LONG_MAX == 9223372036854775807L
-/* Nonzero if X (a long int) contains a NULL byte. */
-#define DETECTNULL(X) (((X) - 0x0101010101010101) & ~(X) & 0x8080808080808080)
-#else
-#error long int is not a 32bit or 64bit type.
-#endif
-#endif
-
-#ifndef DETECTNULL
-#error long int is not a 32bit or 64bit byte
-#endif
-
-#define TOO_SMALL(LEN) ((LEN) < sizeof (long))
-
-char *
-_DEFUN (strncpy, (dst0, src0),
-	char *dst0 _AND
-	_CONST char *src0 _AND
-	size_t count)
-{
-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
-  char *dscan;
-  _CONST char *sscan;
-
-  dscan = dst0;
-  sscan = src0;
-  while (count > 0)
-    {
-      --count;
-      if ((*dscan++ = *sscan++) == '\0')
-	break;
-    }
-  while (count-- > 0)
-    *dscan++ = '\0';
-
-  return dst0;
-#else
-  char *dst = dst0;
-  _CONST char *src = src0;
-  long *aligned_dst;
-  _CONST long *aligned_src;
-
-  /* If SRC and DEST is aligned and count large enough, then copy words.  */
-  if (!UNALIGNED (src, dst) && !TOO_SMALL (count))
-    {
-      aligned_dst = (long*)dst;
-      aligned_src = (long*)src;
-
-      /* SRC and DEST are both "long int" aligned, try to do "long int"
-	 sized copies.  */
-      while (count >= sizeof (long int) && !DETECTNULL(*aligned_src))
-	{
-	  count -= sizeof (long int);
-	  *aligned_dst++ = *aligned_src++;
-	}
-
-      dst = (char*)aligned_dst;
-      src = (char*)aligned_src;
-    }
-
-  while (count > 0)
-    {
-      --count;
-      if ((*dst++ = *src++) == '\0')
-	break;
-    }
-
-  while (count-- > 0)
-    *dst++ = '\0';
-
-  return dst0;
-#endif /* not PREFER_SIZE_OVER_SPEED */
-}
diff --git a/newlib/libc/string/strndup.c b/newlib/libc/string/strndup.c
deleted file mode 100644
index caa1b68b7..000000000
--- a/newlib/libc/string/strndup.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _REENT_ONLY
-
-#include <_ansi.h>
-#include <reent.h>
-#include <stdlib.h>
-#include <string.h>
-
-char *
-_DEFUN (strndup, (str, n), 
-	_CONST char *str _AND
-	size_t n)
-{
-  return _strndup_r (_REENT, str, n);
-}
-
-#endif /* !_REENT_ONLY */
diff --git a/newlib/libc/string/strndup_r.c b/newlib/libc/string/strndup_r.c
deleted file mode 100644
index 86d9eec44..000000000
--- a/newlib/libc/string/strndup_r.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <reent.h>
-#include <stdlib.h>
-#include <string.h>
-
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-
-char *
-_DEFUN (_strndup_r, (reent_ptr, str, n), 
-        struct _reent *reent_ptr  _AND
-        _CONST char   *str _AND
-        size_t n)
-{
-  size_t len = MIN(strlen (str), n);
-  char *copy = _malloc_r (reent_ptr, len + 1);
-  if (copy)
-    {
-      memcpy (copy, str, len);
-      copy[len] = '\0';
-    }
-  return copy;
-}
diff --git a/newlib/libc/string/strnlen.c b/newlib/libc/string/strnlen.c
deleted file mode 100644
index b9a3b5e77..000000000
--- a/newlib/libc/string/strnlen.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* 
-FUNCTION
-	<<strnlen>>---character string length
-	
-INDEX
-	strnlen
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	size_t strnlen(const char *<[str]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	size_t strnlen(<[str]>, <[n]>)
-	char *<[src]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<strnlen>> function works out the length of the string
-	starting at <<*<[str]>>> by counting chararacters until it
-	reaches a NUL character or the maximum: <[n]> number of
-        characters have been inspected.
-
-RETURNS
-	<<strnlen>> returns the character count or <[n]>.
-
-PORTABILITY
-<<strnlen>> is a Gnu extension.
-
-<<strnlen>> requires no supporting OS subroutines.
-
-*/
-
-#undef __STRICT_ANSI__
-#include <_ansi.h>
-#include <string.h>
-
-size_t
-_DEFUN (strnlen, (str, n),
-	_CONST char *str _AND
-	size_t n)
-{
-  _CONST char *start = str;
-
-  while (*str && n-- > 0)
-    str++;
-
-  return str - start;
-}
diff --git a/newlib/libc/string/strpbrk.c b/newlib/libc/string/strpbrk.c
deleted file mode 100644
index e7f2dd2b6..000000000
--- a/newlib/libc/string/strpbrk.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-FUNCTION
-	<<strpbrk>>---find chars in string
-
-INDEX
-	strpbrk
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strpbrk(const char *<[s1]>, const char *<[s2]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strpbrk(<[s1]>, <[s2]>)
-	char *<[s1]>;
-	char *<[s2]>;
-
-DESCRIPTION
-	This function locates the first occurence in the string
-	pointed to by <[s1]> of any character in string pointed to by
-	<[s2]> (excluding the terminating null character).
-
-RETURNS
-	<<strpbrk>> returns a pointer to the character found in <[s1]>, or a
-	null pointer if no character from <[s2]> occurs in <[s1]>.
-
-PORTABILITY
-<<strpbrk>> requires no supporting OS subroutines.
-*/
-
-#include <string.h>
-
-char *
-_DEFUN (strpbrk, (s1, s2),
-	_CONST char *s1 _AND
-	_CONST char *s2)
-{
-  _CONST char *c = s2;
-  if (!*s1)
-    return (char *) NULL;
-
-  while (*s1)
-    {
-      for (c = s2; *c; c++)
-	{
-	  if (*s1 == *c)
-	    break;
-	}
-      if (*c)
-	break;
-      s1++;
-    }
-
-  if (*c == '\0')
-    s1 = NULL;
-
-  return (char *) s1;
-}
diff --git a/newlib/libc/string/strrchr.c b/newlib/libc/string/strrchr.c
deleted file mode 100644
index 36ef3ef2f..000000000
--- a/newlib/libc/string/strrchr.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-FUNCTION
-	<<strrchr>>---reverse search for character in string
-
-INDEX
-	strrchr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char * strrchr(const char *<[string]>, int <[c]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char * strrchr(<[string]>, <[c]>);
-	char *<[string]>;
-	int *<[c]>;
-
-DESCRIPTION
-	This function finds the last occurence of <[c]> (converted to
-	a char) in the string pointed to by <[string]> (including the
-	terminating null character).
-
-RETURNS
-	Returns a pointer to the located character, or a null pointer
-	if <[c]> does not occur in <[string]>.
-
-PORTABILITY
-<<strrchr>> is ANSI C.
-
-<<strrchr>> requires no supporting OS subroutines.
-
-QUICKREF
-	strrchr ansi pure
-*/
-
-#include <string.h>
-
-char *
-_DEFUN (strrchr, (s, i),
-	_CONST char *s _AND
-	int i)
-{
-  _CONST char *last = NULL;
-
-  if (i)
-    {
-      while (s=strchr(s, i))
-	{
-	  last = s;
-	  s++;
-	}
-    }
-  else
-    {
-      last = strchr(s, i);
-    }
-		  
-  return (char *) last;
-}
diff --git a/newlib/libc/string/strsep.c b/newlib/libc/string/strsep.c
deleted file mode 100644
index d3d0ad0a9..000000000
--- a/newlib/libc/string/strsep.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* BSD strsep function */
-
-/* Copyright 2002, Red Hat Inc. */
-
-/* undef STRICT_ANSI so that strsep prototype will be defined */
-#undef  __STRICT_ANSI__
-#include <string.h>
-#include <_ansi.h>
-#include <reent.h>
-
-extern char *__strtok_r (char *, const char *, char **, int);
-
-char *
-_DEFUN (strsep, (source_ptr, delim),
-	register char **source_ptr _AND
-	register const char *delim)
-{
-	return __strtok_r (*source_ptr, delim, source_ptr, 0);
-}
diff --git a/newlib/libc/string/strspn.c b/newlib/libc/string/strspn.c
deleted file mode 100644
index 32b921b10..000000000
--- a/newlib/libc/string/strspn.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-FUNCTION
-	<<strspn>>---find initial match
-
-INDEX
-	strspn
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	size_t strspn(const char *<[s1]>, const char *<[s2]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	size_t strspn(<[s1]>, <[s2]>)
-	char *<[s1]>;
-	char *<[s2]>;
-
-DESCRIPTION
-	This function computes the length of the initial segment of
-	the string pointed to by <[s1]> which consists entirely of
-	characters from the string pointed to by <[s2]> (excluding the
-	terminating null character).
-
-RETURNS
-	<<strspn>> returns the length of the segment found.
-
-PORTABILITY
-<<strspn>> is ANSI C.
-
-<<strspn>> requires no supporting OS subroutines.
-
-QUICKREF
-	strspn ansi pure
-*/
-
-#include <string.h>
-
-size_t
-_DEFUN (strspn, (s1, s2),
-	_CONST char *s1 _AND
-	_CONST char *s2)
-{
-  _CONST char *s = s1;
-  _CONST char *c;
-
-  while (*s1)
-    {
-      for (c = s2; *c; c++)
-	{
-	  if (*s1 == *c)
-	    break;
-	}
-      if (*c == '\0')
-	break;
-      s1++;
-    }
-
-  return s1 - s;
-}
diff --git a/newlib/libc/string/strstr.c b/newlib/libc/string/strstr.c
deleted file mode 100644
index dddced3b2..000000000
--- a/newlib/libc/string/strstr.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-FUNCTION
-	<<strstr>>---find string segment
-
-INDEX
-	strstr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strstr(const char *<[s1]>, const char *<[s2]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strstr(<[s1]>, <[s2]>)
-	char *<[s1]>;
-	char *<[s2]>;
-
-DESCRIPTION
-	Locates the first occurence in the string pointed to by <[s1]> of
-	the sequence of characters in the string pointed to by <[s2]>
-	(excluding the terminating null  character).
-
-RETURNS
-	Returns a pointer to the located string segment, or a null
-	pointer if the string <[s2]> is not found. If <[s2]> points to
-	a string with zero length, the <[s1]> is returned.
-
-PORTABILITY
-<<strstr>> is ANSI C.
-
-<<strstr>> requires no supporting OS subroutines.
-
-QUICKREF
-	strstr ansi pure
-*/
-
-#include <string.h>
-
-char *
-_DEFUN (strstr, (searchee, lookfor),
-	_CONST char *searchee _AND
-	_CONST char *lookfor)
-{
-  if (*searchee == 0)
-    {
-      if (*lookfor)
-	return (char *) NULL;
-      return (char *) searchee;
-    }
-
-  while (*searchee)
-    {
-      size_t i;
-      i = 0;
-
-      while (1)
-	{
-	  if (lookfor[i] == 0)
-	    {
-	      return (char *) searchee;
-	    }
-
-	  if (lookfor[i] != searchee[i])
-	    {
-	      break;
-	    }
-	  i++;
-	}
-      searchee++;
-    }
-
-  return (char *) NULL;
-}
diff --git a/newlib/libc/string/strtok.c b/newlib/libc/string/strtok.c
deleted file mode 100644
index 8d53290c7..000000000
--- a/newlib/libc/string/strtok.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-FUNCTION
-	<<strtok>>,<<strtok_r>>,<<strsep>>---get next token from a string
-
-INDEX
-	strtok
-
-INDEX
-	strtok_r
-
-INDEX
-	strsep
-
-ANSI_SYNOPSIS
-	#include <string.h>
-      	char *strtok(char *<[source]>, const char *<[delimiters]>)
-      	char *strtok_r(char *<[source]>, const char *<[delimiters]>,
-			char **<[lasts]>)
-      	char *strsep(char **<[source_ptr]>, const char *<[delimiters]>)
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strtok(<[source]>, <[delimiters]>)
-	char *<[source]>;
-	char *<[delimiters]>;
-
-	char *strtok_r(<[source]>, <[delimiters]>, <[lasts]>)
-	char *<[source]>;
-	char *<[delimiters]>;
-	char **<[lasts]>;
-
-	char *strsep(<[source_ptr]>, <[delimiters]>)
-	char **<[source_ptr]>;
-	char *<[delimiters]>;
-
-DESCRIPTION
-	The <<strtok>> function is used to isolate sequential tokens in a 
-	null-terminated string, <<*<[source]>>>. These tokens are delimited 
-	in the string by at least one of the characters in <<*<[delimiters]>>>.
-	The first time that <<strtok>> is called, <<*<[source]>>> should be
-	specified; subsequent calls, wishing to obtain further tokens from
-	the same string, should pass a null pointer instead.  The separator
-	string, <<*<[delimiters]>>>, must be supplied each time, and may 
-	change between calls.
-
-	The <<strtok>> function returns a pointer to the beginning of each 
-	subsequent token in the string, after replacing the separator 
-	character itself with a NUL character.  When no more tokens remain, 
-	a null pointer is returned.
-
-	The <<strtok_r>> function has the same behavior as <<strtok>>, except
-	a pointer to placeholder <<*[lasts]>> must be supplied by the caller.
-
-	The <<strsep>> function is similar in behavior to <<strtok>>, except
-	a pointer to the string pointer must be supplied <<[source_ptr]>> and
-	the function does not skip leading delimeters.  When the string starts
-	with a delimeter, the delimeter is changed to the NUL character and
-	the empty string is returned.  Like <<strtok_r>> and <<strtok>>, the
-	<<*[source_ptr]>> is updated to the next character following the
-	last delimeter found or NULL if the end of string is reached with
-	no more delimeters.
-
-RETURNS
-	<<strtok>>, <<strtok_r>>, and <<strsep>> all return a pointer to the 
-	next token, or <<NULL>> if no more tokens can be found.  For
-	<<strsep>>, a token may be the empty string.
-
-NOTES
-	<<strtok>> is unsafe for multi-thread applications.  <<strtok_r>>
-	and <<strsep>> are MT-Safe and should be used instead.
-
-PORTABILITY
-<<strtok>> is ANSI C.
-<<strtok_r>> is POSIX.
-<<strsep>> is a BSD-extension.
-
-<<strtok>>, <<strtok_r>>, and <<strsep>> require no supporting OS subroutines.
-
-QUICKREF
-	strtok ansi impure
-*/
-
-/* undef STRICT_ANSI so that strtok_r prototype will be defined */
-#undef  __STRICT_ANSI__
-#include <string.h>
-#include <_ansi.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-extern char *__strtok_r (char *, const char *, char **, int);
-
-char *
-_DEFUN (strtok, (s, delim),
-	register char *s _AND
-	register const char *delim)
-{
-	_REENT_CHECK_MISC(_REENT);
-	return __strtok_r (s, delim, &(_REENT_STRTOK_LAST(_REENT)), 1);
-}
-#endif
diff --git a/newlib/libc/string/strtok_r.c b/newlib/libc/string/strtok_r.c
deleted file mode 100644
index 02ad80b9b..000000000
--- a/newlib/libc/string/strtok_r.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 1988 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <string.h>
-
-char *
-_DEFUN (__strtok_r, (s, delim, lasts, skip_leading_delim),
-	register char *s _AND
-	register const char *delim _AND
-	char **lasts _AND
-	int skip_leading_delim)
-{
-	register char *spanp;
-	register int c, sc;
-	char *tok;
-
-
-	if (s == NULL && (s = *lasts) == NULL)
-		return (NULL);
-
-	/*
-	 * Skip (span) leading delimiters (s += strspn(s, delim), sort of).
-	 */
-cont:
-	c = *s++;
-	for (spanp = (char *)delim; (sc = *spanp++) != 0;) {
-		if (c == sc) {
-			if (skip_leading_delim) {
-				goto cont;
-			}
-			else {
-				*lasts = s;
-				s[-1] = 0;
-				return (s - 1);
-			}
-		}
-	}
-
-	if (c == 0) {		/* no non-delimiter characters */
-		*lasts = NULL;
-		return (NULL);
-	}
-	tok = s - 1;
-
-	/*
-	 * Scan token (scan for delimiters: s += strcspn(s, delim), sort of).
-	 * Note that delim must have one NUL; we stop if we see that, too.
-	 */
-	for (;;) {
-		c = *s++;
-		spanp = (char *)delim;
-		do {
-			if ((sc = *spanp++) == c) {
-				if (c == 0)
-					s = NULL;
-				else
-					s[-1] = 0;
-				*lasts = s;
-				return (tok);
-			}
-		} while (sc != 0);
-	}
-	/* NOTREACHED */
-}
-
-char *
-_DEFUN (strtok_r, (s, delim, lasts),
-	register char *s _AND
-	register const char *delim _AND
-	char **lasts)
-{
-	return __strtok_r (s, delim, lasts, 1);
-}
diff --git a/newlib/libc/string/strupr.c b/newlib/libc/string/strupr.c
deleted file mode 100644
index d7f7c129d..000000000
--- a/newlib/libc/string/strupr.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
-FUNCTION
-	<<strupr>>---force string to uppercase
-	
-INDEX
-	strupr
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	char *strupr(char *<[a]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	char *strupr(<[a]>)
-	char *<[a]>;
-
-DESCRIPTION
-	<<strupr>> converts each characters in the string at <[a]> to
-	upper case.
-
-RETURNS
-	<<strupr>> returns its argument, <[a]>.
-
-PORTABILITY
-<<strupr>> is not widely portable.
-
-<<strupr>> requires no supporting OS subroutines.
-
-QUICKREF
-	strupr */
-
-#include <string.h>
-#include <ctype.h>
-
-char *
-strupr (a)
-     char *a;
-{
-  char *ret = a;
-
-  while (*a != '\0')
-    {
-      if (islower (*a))
-	*a = toupper (*a);
-      ++a;
-    }
-
-  return ret;
-}
diff --git a/newlib/libc/string/strxfrm.c b/newlib/libc/string/strxfrm.c
deleted file mode 100644
index 65ed4f1b1..000000000
--- a/newlib/libc/string/strxfrm.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
-FUNCTION
-	<<strxfrm>>---transform string
-
-INDEX
-	strxfrm
-
-ANSI_SYNOPSIS
-	#include <string.h>
-	size_t strxfrm(char *<[s1]>, const char *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <string.h>
-	size_t strxfrm(<[s1]>, <[s2]>, <[n]>);
-	char *<[s1]>;
-	char *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	This function transforms the string pointed to by <[s2]> and
-	places the resulting string into the array pointed to by
-	<[s1]>. The transformation is such that if the <<strcmp>>
-	function is applied to the two transformed strings, it returns
-	a value greater than, equal to, or less than zero,
-	correspoinding to the result of a <<strcoll>> function applied
-	to the same two original strings.
-
-	No more than <[n]> characters are placed into the resulting
-	array pointed to by <[s1]>, including the terminating null
-	character. If <[n]> is zero, <[s1]> may be a null pointer. If
-	copying takes place between objects that overlap, the behavior
-	is undefined.
-
-	With a C locale, this function just copies.
-
-RETURNS
-	The <<strxfrm>> function returns the length of the transformed string
-	(not including the terminating null character). If the value returned
-	is <[n]> or more, the contents of the array pointed to by
-	<[s1]> are indeterminate.
-
-PORTABILITY
-<<strxfrm>> is ANSI C.
-
-<<strxfrm>> requires no supporting OS subroutines.
-
-QUICKREF
-	strxfrm ansi pure
-*/
-
-#include <string.h>
-
-size_t
-_DEFUN (strxfrm, (s1, s2, n),
-	char *s1 _AND
-	_CONST char *s2 _AND
-	size_t n)
-{
-  size_t res;
-  res = 0;
-  while (n-- > 0)
-    {
-      if ((*s1++ = *s2++) != '\0')
-        ++res;
-      else
-        return res;
-    }
-  while (*s2)
-    {
-      ++s2;
-      ++res;
-    }
-
-  return res;
-}
diff --git a/newlib/libc/string/swab.c b/newlib/libc/string/swab.c
deleted file mode 100644
index aee076319..000000000
--- a/newlib/libc/string/swab.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-	<<swab>>---swap adjacent bytes
-
-ANSI_SYNOPSIS
-	#include <unistd.h>
-	void swab(const void *<[in]>, void *<[out]>, ssize_t <[n]>);
-
-TRAD_SYNOPSIS
-	void swab(<[in]>, <[out]>, <[n]>
-	void *<[in]>;
-	void *<[out]>;
-	ssize_t <[n]>;
-
-DESCRIPTION
-	This function copies <[n]> bytes from the memory region
-	pointed to by <[in]> to the memory region pointed to by
-	<[out]>, exchanging adjacent even and odd bytes.
-
-PORTABILITY
-<<swab>> requires no supporting OS subroutines.
-*/
-
-#include <unistd.h>
-
-void
-_DEFUN (swab, (b1, b2, length),
-	_CONST void *b1 _AND
-	void *b2 _AND
-	ssize_t length)
-{
-  const char *from = b1;
-  char *to = b2;
-  ssize_t ptr;
-  for (ptr = 1; ptr < length; ptr += 2)
-    {
-      char p = from[ptr];
-      char q = from[ptr-1];
-      to[ptr-1] = p;
-      to[ptr  ] = q;
-    }
-  if (ptr == length) /* I.e., if length is odd, */
-    to[ptr-1] = 0;   /* then pad with a NUL. */
-}
diff --git a/newlib/libc/string/u_strerr.c b/newlib/libc/string/u_strerr.c
deleted file mode 100644
index fa4605c8b..000000000
--- a/newlib/libc/string/u_strerr.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <_ansi.h>
-
-char *
-_DEFUN(_user_strerror, (errnum),
-       int errnum)
-{
-  return 0;
-}
diff --git a/newlib/libc/string/wcscat.c b/newlib/libc/string/wcscat.c
deleted file mode 100644
index b3a3bd987..000000000
--- a/newlib/libc/string/wcscat.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-FUNCTION
-	<<wcscat>>---concatenate two wide-character strings
-INDEX
-	wcscat
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcscat(wchar_t *<[s1]>, const wchar_t *<[s2]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcscat(<[s1]>, <[s2]>
-	wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-
-DESCRIPTION
-	The <<wcscat>> function appends a copy of the wide-character string
-	pointed to by <[s2]> (including the terminating null wide-character
-	code) to the end of the wide-character string pointed to by <[s1]>.
-	The initial wide-character code of <[s2]> overwrites the null
-	wide-character code at the end of <[s1]>. If copying takes place between
-	objects that overlap, the behaviour is undefined. 
-
-RETURNS
-	The <<wcscat>> function returns <[s1]>;
-	no return value is reserved to indicate an error. 
-
-PORTABILITY
-<<wcscat>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcscat.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcscat.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcscat, (s1, s2),
-	wchar_t * s1 _AND
-	_CONST wchar_t * s2)
-{
-  wchar_t *p;
-  wchar_t *q;
-  _CONST wchar_t *r;
-
-  p = s1;
-  while (*p)
-    p++;
-  q = p;
-  r = s2;
-  while (*r)
-    *q++ = *r++;
-  *q = '\0';
-  return s1;
-}
diff --git a/newlib/libc/string/wcschr.c b/newlib/libc/string/wcschr.c
deleted file mode 100644
index acc07a521..000000000
--- a/newlib/libc/string/wcschr.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-FUNCTION
-	<<wcschr>>---wide-character string scanning operation
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcschr(const wchar_t *<[s]>, wchar_t <[c]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcschr(<[s]>, <[c]>
-	const wchar_t *<[s]>;
-	wchar_t <[c]>;
-
-DESCRIPTION
-	The <<wcschr>> function locates the first occurrence of <[c]> in the
-	wide-character string pointed to by <[s]>. The value of <[c]> must be a
-	character representable as a type wchar_t and must be a wide-character
-	code corresponding to a valid character in the current locale.
-	The terminating null wide-character string.
-
-RETURNS
-	Upon completion, <<wcschr>> returns a pointer to the wide-character
-	code, or a null pointer if the wide-character code is not found. 
-
-PORTABILITY
-<<wcschr>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcschr.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcschr.c,v 1.2 2000/12/21 05:07:25 itojun Exp
- */
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcschr, (s, c),
-	_CONST wchar_t * s _AND
-	wchar_t c)
-{
-  _CONST wchar_t *p;
-
-  p = s;
-  do
-    {
-      if (*p == c)
-	{
-	  /* LINTED interface specification */
-	  return (wchar_t *) p;
-	}
-    } while (*p++);
-  return NULL;
-}
diff --git a/newlib/libc/string/wcscmp.c b/newlib/libc/string/wcscmp.c
deleted file mode 100644
index 279f3a90c..000000000
--- a/newlib/libc/string/wcscmp.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-FUNCTION
-	<<wcscmp>>---compare two wide-character strings
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wcscmp(const wchar_t *<[s1]>, *<[s2]>);
-
-TRAD_SYNOPSIS
-	int wcscmp(<[s1]>, <[s2]>
-	const wchar_t *<[s1]>, <[s2]>;
-
-DESCRIPTION
-	The <<wcscmp>> function compares the wide-character string pointed to
-	by <[s1]> to the wide-character string pointed to by <[s2]>.
-
-	The sign of a non-zero return value is determined by the sign of the
-	difference between the values of the first pair of wide-character codes
-	that differ in the objects being compared.
-
-RETURNS
-	Upon completion, <<wcscmp>> returns an integer greater than, equal to
-	or less than 0, if the wide-character string pointed to by <[s1]> is
-	greater than, equal to or less than the wide-character string pointed
-	to by <[s2]> respectively. 
-
-PORTABILITY
-<<wcscmp>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD$	*/
-
-/*-
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Chris Torek.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-/*
- * Compare strings.
- */
-int
-_DEFUN (wcscmp, (s1, s2),
-	_CONST wchar_t * s1 _AND
-	_CONST wchar_t * s2)
-{
-
-  while (*s1 == *s2++)
-    if (*s1++ == 0)
-      return (0);
-  return (*s1 - *--s2);
-}
diff --git a/newlib/libc/string/wcscoll.c b/newlib/libc/string/wcscoll.c
deleted file mode 100644
index 9287af38c..000000000
--- a/newlib/libc/string/wcscoll.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-FUNCTION
-	<<wcscoll>>---locale specific wide-character string compare
-	
-INDEX
-	wcscoll
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wcscoll(const wchar_t *<[stra]>, const wchar_t * <[strb]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	int wcscoll(<[stra]>, <[strb]>)
-	wchar_t *<[stra]>;
-	wchar_t *<[strb]>;
-
-DESCRIPTION
-	<<wcscoll>> compares the wide-character string pointed to by
-	<[stra]> to the wide-character string pointed to by <[strb]>,
-	using an interpretation appropriate to the current <<LC_COLLATE>>
-	state.
-
-	The current implementation of <<wcscoll>> simply uses <<wcscmp>>
-	and does not support any language-specific sorting.
-
-RETURNS
-	If the first string is greater than the second string,
-	<<wcscoll>> returns a number greater than zero.  If the two
-	strings are equivalent, <<wcscoll>> returns zero.  If the first
-	string is less than the second string, <<wcscoll>> returns a
-	number less than zero.
-
-PORTABILITY
-<<wcscoll>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-*/
-
-#include <_ansi.h>
-#include <wchar.h>
-
-int
-_DEFUN (wcscoll, (a, b),
-	_CONST wchar_t *a _AND
-	_CONST wchar_t *b)
-
-{
-  return wcscmp (a, b);
-}
diff --git a/newlib/libc/string/wcscpy.c b/newlib/libc/string/wcscpy.c
deleted file mode 100644
index 5a72338ce..000000000
--- a/newlib/libc/string/wcscpy.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-FUNCTION
-	<<wcscpy>>---copy a wide-character string 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcscpy(wchar_t *<[s1]>, const wchar_t *,<[s2]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcscpy(<[s1]>, <[s2]>
-	wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-
-DESCRIPTION
-	The <<wcscpy>> function copies the wide-character string pointed to by
-	<[s2]> (including the terminating null wide-character code) into the
-	array pointed to by <[s1]>. If copying takes place between objects that
-	overlap, the behaviour is undefined. 
-
-RETURNS
-	The <<wcscpy>> function returns <[s1]>; no return value is reserved to
-	indicate an error. 
-
-PORTABILITY
-<<wcscpy>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcscpy.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcscpy.c,v 1.2 2000/12/21 04:51:09 itojun Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcscpy, (s1, s2),
-	wchar_t * s1 _AND
-	_CONST wchar_t * s2)
-{
-  wchar_t *p;
-  _CONST wchar_t *q;
-
-  *s1 = '\0';
-  p = s1;
-  q = s2;
-  while (*q)
-    *p++ = *q++;
-  *p = '\0';
-
-  return s1;
-}
diff --git a/newlib/libc/string/wcscspn.c b/newlib/libc/string/wcscspn.c
deleted file mode 100644
index 7e53cc15d..000000000
--- a/newlib/libc/string/wcscspn.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-FUNCTION
-	<<wcscspn>>---get length of a complementary wide substring 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	size_t wcscspn(const wchar_t *<[s]>, wchar_t *<[set]>);
-
-TRAD_SYNOPSIS
-	size_t wcscspn(<[s]>, <[set]>
-	const wchar_t *<[s]>;
-	const wchar_t *<[set]>;
-
-DESCRIPTION
-	The <<wcscspn>> function computes the length of the maximum initial
-	segment of the wide-character string pointed to by <[s]> which consists
-	entirely of wide-character codes not from the wide-character string
-	pointed to by <[set]>. 
-
-RETURNS
-	The <<wcscspn>> function returns the length of the initial substring of
-	<[s1]>; no return value is reserved to indicate an error.
-
-PORTABILITY
-<<wcscspn>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcscspn.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcscspn.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (wcscspn, (s, set),
-	_CONST wchar_t * s _AND
-	_CONST wchar_t * set)
-{
-  _CONST wchar_t *p;
-  _CONST wchar_t *q;
-
-  p = s;
-  while (*p)
-    {
-      q = set;
-      while (*q)
-	{
-	  if (*p == *q)
-	    goto done;
-	  q++;
-	}
-      p++;
-    }
-
-done:
-  return (p - s);
-}
diff --git a/newlib/libc/string/wcslcat.c b/newlib/libc/string/wcslcat.c
deleted file mode 100644
index adf683ad5..000000000
--- a/newlib/libc/string/wcslcat.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-FUNCTION
-	<<wcslcat>>---concatenate wide-character strings to specified length
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	size_t wcslcat(wchar_t *<[dst]>, const wchar_t *<[src]>, size_t <[siz]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	size_t wcslcat(<[dst]>, <[src]>, <[siz]>
-	wchar_t *<[dst]>;
-	const wchar_t *<[src]>;
-	size_t <[siz]>;
-
-DESCRIPTION
-	The <<wcslcat>> function appends wide-characters from <[src]> to
-	end of the <[dst]> wide-character string so that the resultant
-	wide-character string is not more than <[siz]> wide-characters
-	including terminating null wide-character code.  A terminating
-	null wide-character is always added unless <[siz]> is 0.  Thus,
-	the maximum number of wide-characters that can be appended from
-	<[src]> is <[siz]> - 1. If copying takes place between objects 
-	that overlap, the behaviour is undefined.
-
-RETURNS
-	Wide-character string length of initial <[dst]> plus the
-	wide-character string length of <[src]> (does not include
-	terminating null wide-characters).  If the return value is
-	greater than or equal to <[siz]>, then truncation occurred and
-	not all wide-characters from <[src]> were appended.
-
-PORTABILITY
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcslcat.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-/*	from OpenBSD: strlcat.c,v 1.3 2000/11/24 11:10:02 itojun Exp 	*/
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-/*
- * Appends src to string dst of size siz (unlike wcsncat, siz is the
- * full size of dst, not space left).  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz == 0).
- * Returns wcslen(initial dst) + wcslen(src); if retval >= siz,
- * truncation occurred.
- */
-size_t
-_DEFUN (wcslcat, (dst, src, siz),
-	wchar_t * dst _AND
-	_CONST wchar_t * src _AND
-	size_t siz)
-{
-  wchar_t *d = dst;
-  _CONST wchar_t *s = src;
-  size_t n = siz;
-  size_t dlen;
-
-  /* Find the end of dst and adjust bytes left but don't go past end */
-  while (*d != '\0' && n-- != 0)
-    d++;
-  dlen = d - dst;
-  n = siz - dlen;
-
-  if (n == 0)
-    return (dlen + wcslen (s));
-  while (*s != '\0')
-    {
-      if (n != 1)
-	{
-	  *d++ = *s;
-	  n--;
-	}
-      s++;
-    }
-  *d = '\0';
-
-  return (dlen + (s - src));	/* count does not include NUL */
-}
diff --git a/newlib/libc/string/wcslcpy.c b/newlib/libc/string/wcslcpy.c
deleted file mode 100644
index ac7d01863..000000000
--- a/newlib/libc/string/wcslcpy.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
-FUNCTION
-	<<wcslcpy>>---copy a wide-character string to specified length
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	size_t wcslcpy(wchar_t *<[dst]>, const wchar_t *<[src]>, size_t <[siz]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	size_t wcslcpy(<[dst]>, <[src]>, <[siz]>)
-	wchar_t *<[dst]>;
-	const wchar_t *<[src]>;
-	size_t <[siz]>;
-
-DESCRIPTION
-	<<wcslcpy>> copies wide-characters from <[src]> to <[dst]>
-	such that up to <[siz]> - 1 characters are copied.  A
-	terminating null is appended to the result, unless <[siz]>
-	is zero.
-
-RETURNS
-	<<wcslcpy>> returns the number of wide-characters in <[src]>,
-	not including the terminating null wide-character.  If the
-	return value is greater than or equal to <[siz]>, then
-	not all wide-characters were copied from <[src]> and truncation
-	occurred.
-
-PORTABILITY
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcslcpy.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-/*	from OpenBSD: strlcpy.c,v 1.4 1999/05/01 18:56:41 millert Exp 	*/
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-/*
- * Copy src to string dst of size siz.  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz == 0).
- * Returns wcslen(src); if retval >= siz, truncation occurred.
- */
-size_t
-_DEFUN (wcslcpy, (dst, src, siz),
-	wchar_t * dst _AND
-	_CONST wchar_t * src _AND
-	size_t siz)
-{
-  wchar_t *d = dst;
-  _CONST wchar_t *s = src;
-  size_t n = siz;
-
-  /* Copy as many bytes as will fit */
-  if (n != 0 && --n != 0)
-    {
-      do
-	{
-	  if ((*d++ = *s++) == 0)
-	    break;
-	}
-      while (--n != 0);
-    }
-
-  /* Not enough room in dst, add NUL and traverse rest of src */
-  if (n == 0)
-    {
-      if (siz != 0)
-	*d = '\0';		/* NUL-terminate dst */
-      while (*s++)
-	;
-    }
-
-  return (s - src - 1);		/* count does not include NUL */
-}
diff --git a/newlib/libc/string/wcslen.c b/newlib/libc/string/wcslen.c
deleted file mode 100644
index d68f00a72..000000000
--- a/newlib/libc/string/wcslen.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
-FUNCTION
-	<<wcslen>>---get wide-character string length 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	size_t wcslen(const wchar_t *<[s]>);
-
-TRAD_SYNOPSIS
-	size_t wcslen(<[s]>
-	const wchar_t *<[s]>;
-
-DESCRIPTION
-	The <<wcslen>> function computes the number of wide-character codes
-	in the wide-character string to which <[s]> points, not including the
-	terminating null wide-character code.
-
-RETURNS
-	The <<wcslen>> function returns the length of <[s]>; no return value is
-	reserved to indicate an error.
-
-PORTABILITY
-<<wcslen>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcslen.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcslen.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (wcslen, (s),
-	_CONST wchar_t * s)
-{
-  _CONST wchar_t *p;
-
-  p = s;
-  while (*p)
-    p++;
-
-  return p - s;
-}
diff --git a/newlib/libc/string/wcsncat.c b/newlib/libc/string/wcsncat.c
deleted file mode 100644
index 2ba293497..000000000
--- a/newlib/libc/string/wcsncat.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-FUNCTION
-	<<wcsncat>>---concatenate part of two wide-character strings 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcsncat(wchar_t *<[s1]>, const wchar_t *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcsncat(<[s1]>, <[s2]>, <[n]>
-	wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wcsncat>> function appends not more than <[n]> wide-character
-	codes (a null wide-character code and wide-character codes that follow
-	it are not appended) from the array pointed to by <[s2]> to the end of
-	the wide-character string pointed to by <[s1]>. The initial
-	wide-character code of <[s2]> overwrites the null wide-character code
-	at the end of <[s1]>.
-	A terminating null wide-character code is always appended to the result.
-	If copying takes place between objects that overlap, the behaviour is
-	undefined.
-
-RETURNS
-	The <<wcsncat>> function returns <[s1]>; no return value is reserved to
-	indicate an error.
-
-PORTABILITY
-<<wcsncat>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcsncat.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcsncat.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcsncat, (s1, s2, n),
-	wchar_t * s1 _AND
-	_CONST wchar_t * s2 _AND
-	size_t n)
-{
-  wchar_t *p;
-  wchar_t *q;
-  _CONST wchar_t *r;
-
-  p = s1;
-  while (*p)
-    p++;
-  q = p;
-  r = s2;
-  while (*r && n)
-    {
-      *q++ = *r++;
-      n--;
-    }
-  *q = '\0';
-  return s1;
-}
diff --git a/newlib/libc/string/wcsncmp.c b/newlib/libc/string/wcsncmp.c
deleted file mode 100644
index 48cb96c25..000000000
--- a/newlib/libc/string/wcsncmp.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-FUNCTION
-	<<wcsncmp>>---compare part of two wide-character strings 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wcsncmp(const wchar_t *<[s1]>, const wchar_t *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	int wcsncmp(<[s1]>, <[s2]>, <[n]>
-	const wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wcsncmp>> function compares not more than <[n]> wide-character
-	codes (wide-character codes that follow a null wide-character code are
-	not compared) from the array pointed to by <[s1]> to the array pointed
-	to by <[s2]>.
-
-	The sign of a non-zero return value is determined by the sign of the
-	difference between the values of the first pair of wide-character codes
-	that differ in the objects being compared. 
-
-RETURNS
-	Upon successful completion, <<wcsncmp>> returns an integer greater than,
-	equal to or less than 0, if the possibly null-terminated array pointed
-	to by <[s1]> is greater than, equal to or less than the possibly
-	null-terminated array pointed to by <[s2]> respectively. 
-
-PORTABILITY
-<<wcsncmp>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD$	*/
-
-/*
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-int
-_DEFUN (wcsncmp, (s1, s2, n),
-	_CONST wchar_t * s1 _AND
-	_CONST wchar_t * s2 _AND
-	size_t n)
-{
-
-  if (n == 0)
-    return (0);
-  do
-    {
-      if (*s1 != *s2++)
-	{
-	  return (*s1 - *--s2);
-	}
-      if (*s1++ == 0)
-	break;
-    }
-  while (--n != 0);
-  return (0);
-}
diff --git a/newlib/libc/string/wcsncpy.c b/newlib/libc/string/wcsncpy.c
deleted file mode 100644
index afe75a238..000000000
--- a/newlib/libc/string/wcsncpy.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-FUNCTION
-	<<wcsncpy>>---copy part of a wide-character string 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcsncpy(wchar_t *<[s1]>, const wchar_t *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcsncpy(<[s1]>, <[s2]>, <[n]>
-	wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wcsncpy>> function copies not more than n wide-character codes
-	(wide-character codes that follow a null wide-character code are not
-	copied) from the array pointed to by <[s2]> to the array pointed to
-	by <[s1]>. If copying takes place between objects that overlap, the
-	behaviour is undefined.
-
-	If the array pointed to by <[s2]> is a wide-character string that is
-	shorter than <[n]> wide-character codes, null wide-character codes are
-	appended to the copy in the array pointed to by <[s1]>, until <[n]>
-	wide-character codes in all are written. 
-
-RETURNS
-	The <<wcsncpy>> function returns <[s1]>; no return value is reserved to
-	indicate an error. 
-
-PORTABILITY
-<<wcsncpy>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcsncpy.c,v 1.1 2000/12/23 23:14:36 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcsncpy.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcsncpy, (s1, s2, n),
-	wchar_t * s1 _AND
-	_CONST wchar_t * s2 _AND
-	size_t n)
-{
-  wchar_t *p;
-  _CONST wchar_t *q;
-
-  *s1 = '\0';
-  p = s1;
-  q = s2;
-  while (n && *q)
-    {
-      *p++ = *q++;
-      n--;
-    }
-  *p = '\0';
-
-  return s1;
-}
diff --git a/newlib/libc/string/wcsnlen.c b/newlib/libc/string/wcsnlen.c
deleted file mode 100644
index e84342d3d..000000000
--- a/newlib/libc/string/wcsnlen.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* 
-FUNCTION
-        <<wcsnlen>>---get fixed-size wide character string length
-    
-INDEX
-        wcsnlen
-
-ANSI_SYNOPSIS
-        #include <wchar.h>
-        size_t wcsnlen(const wchar_t *<[s]>, size_t <[maxlen]>);
-
-TRAD_SYNOPSIS
-        #include <wchar.h>
-        size_t wcsnlen(<[s]>, <[maxlen]>)
-        wchar_t *<[s]>;
-        size_t <[maxlen]>;
-
-DESCRIPTION
-        The <<wcsnlen>> function computes the number of wide character codes
-        in the wide character string pointed to by <[s]> not including the
-        terminating L'\0' wide character but at most <[maxlen]> wide
-        characters.
-
-RETURNS
-        <<wcsnlen>> returns the length of <[s]> if it is less then <[maxlen]>,
-        or <[maxlen]> if there is no L'\0' wide character in first <[maxlen]>
-        characters.
-
-PORTABILITY
-<<wcsnlen>> is GNU extension..
-<<wcsnlen>> requires no supporting OS subroutines.
-*/
-
-/*
- * Copyright (c) 2003, Artem B. Bityuckiy (dedekind@mail.ru).
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the above copyright notice,
- * this condition statement, and the following disclaimer are retained
- * in any redistributions of the source code.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <wchar.h>
-
-size_t
-_DEFUN(wcsnlen, (s, maxlen), 
-                 _CONST wchar_t *s _AND 
-                 size_t maxlen)
-{
-  _CONST wchar_t *p;
-
-  p = s;
-  while (*p && maxlen-- > 0)
-    p++;
-
-  return (size_t)(p - s);
-}
-
-
-
diff --git a/newlib/libc/string/wcspbrk.c b/newlib/libc/string/wcspbrk.c
deleted file mode 100644
index bfe793b15..000000000
--- a/newlib/libc/string/wcspbrk.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-FUNCTION
-	<<wcspbrk>>----scan wide-character string for a wide-character code
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcspbrk(const wchar_t *<[s]>, const wchar_t *<[set]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcspbrk(<[s]>, <[set]>
-	const wchar_t *<[s]>;
-	const wchar_t *<[set]>;
-
-DESCRIPTION
-	The <<wcspbrk>> function locates the first occurrence in the
-	wide-character string pointed to by <[s]> of any wide-character code
-	from the wide-character string pointed to by <[set]>. 
-
-RETURNS
-	Upon successful completion, <<wcspbrk>> returns a pointer to the
-	wide-character code or a null pointer if no wide-character code from
-	<[set]> occurs in <[s]>.
-
-PORTABILITY
-<<wcspbrk>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcspbrk.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcspbrk.c,v 1.2 2000/12/21 05:07:25 itojun Exp
- */
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcspbrk, (s, set),
-	_CONST wchar_t * s _AND
-	_CONST wchar_t * set)
-{
-  _CONST wchar_t *p;
-  _CONST wchar_t *q;
-
-  p = s;
-  while (*p)
-    {
-      q = set;
-      while (*q)
-	{
-	  if (*p == *q)
-	    {
-	      /* LINTED interface specification */
-	      return (wchar_t *) p;
-	    }
-	  q++;
-	}
-      p++;
-    }
-  return NULL;
-}
diff --git a/newlib/libc/string/wcsrchr.c b/newlib/libc/string/wcsrchr.c
deleted file mode 100644
index d3dc7431e..000000000
--- a/newlib/libc/string/wcsrchr.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-FUNCTION
-	<<wcsrchr>>---wide-character string scanning operation 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcsrchr(const wchar_t *<[s]>, wchar_t <[c]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcsrchr(<[s]>, <[c]>
-	const wchar_t *<[s]>;
-	wchar_t <[c]>;
-
-DESCRIPTION
-	The <<wcsrchr>> function locates the last occurrence of <[c]> in the
-	wide-character string pointed to by <[s]>. The value of <[c]> must be a
-	character representable as a type wchar_t and must be a wide-character
-	code corresponding to a valid character in the current locale.
-	The terminating null wide-character code is considered to be part of
-	the wide-character string. 
-
-RETURNS
-	Upon successful completion, <<wcsrchr>> returns a pointer to the
-	wide-character code or a null pointer if <[c]> does not occur in the
-	wide-character string.
-
-PORTABILITY
-<<wcsrchr>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcsrchr.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcsrchr.c,v 1.2 2000/12/21 05:07:25 itojun Exp
- */
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcsrchr, (s, c),
-	_CONST wchar_t * s _AND
-	wchar_t c)
-{
-  _CONST wchar_t *p;
-
-  p = s;
-  while (*p)
-    p++;
-  while (s <= p)
-    {
-      if (*p == c)
-	{
-	  /* LINTED interface specification */
-	  return (wchar_t *) p;
-	}
-      p--;
-    }
-  return NULL;
-}
diff --git a/newlib/libc/string/wcsspn.c b/newlib/libc/string/wcsspn.c
deleted file mode 100644
index f0b2fb99f..000000000
--- a/newlib/libc/string/wcsspn.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-FUNCTION
-	<<wcsspn>>---get length of a wide substring 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	size_t wcsspn(const wchar_t *<[s]>, const wchar_t *<[set]>);
-
-TRAD_SYNOPSIS
-	size_t wcsspn(<[s]>, <[set]>
-	const wchar_t *<[s]>;
-	const wchar_t *<[set]>;
-
-DESCRIPTION
-	The <<wcsspn>> function computes the length of the maximum initial
-	segment of the wide-character string pointed to by <[s]> which consists
-	entirely of wide-character codes from the wide-character string
-	pointed to by <[set]>.
-
-RETURNS
-	The wcsspn() function returns the length <[s1]>; no return value is
-	reserved to indicate an error.
-
-PORTABILITY
-<<wcsspn>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wcsspn.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcsspn.c,v 1.1 1999/12/29 21:47:45 tshiozak Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-size_t
-_DEFUN (wcsspn, (s, set),
-	_CONST wchar_t * s _AND
-	_CONST wchar_t * set)
-{
-  _CONST wchar_t *p;
-  _CONST wchar_t *q;
-
-  p = s;
-  while (*p)
-    {
-      q = set;
-      while (*q)
-	{
-	  if (*p == *q)
-	    break;
-	}
-      if (!*q)
-	goto done;
-      p++;
-    }
-
-done:
-  return (p - s);
-}
diff --git a/newlib/libc/string/wcsstr.c b/newlib/libc/string/wcsstr.c
deleted file mode 100644
index 30fc4631f..000000000
--- a/newlib/libc/string/wcsstr.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-FUNCTION
-	<<wcsstr>>---find a wide-character substring 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wcsstr(const wchar_t *<[big]>, const wchar_t *<[little]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wcsstr(<[big]>, <[little]>
-	const wchar_t *<[big]>;
-	const wchar_t *<[little]>;
-
-DESCRIPTION
-	The <<wcsstr>> function locates the first occurrence in the
-	wide-character string pointed to by <[big]> of the sequence of
-	wide-characters (excluding the terminating null wide-character) in the
-	wide-character string pointed to by <[little]>.
-
-RETURNS
-	On successful completion, <<wcsstr>> returns a pointer to the located
-	wide-character string, or a null pointer if the wide-character string
-	is not found.
-
-	If <[little]> points to a wide-character string with zero length,
-	the function returns <[big]>.
-
-PORTABILITY
-<<wcsstr>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-
-*/
-
-/*	$NetBSD: wcsstr.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wcsstr.c,v 1.2 2000/12/21 05:07:25 itojun Exp
- */
-
-#include <_ansi.h>
-#include <stddef.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wcsstr, (big, little),
-	_CONST wchar_t * big _AND
-	_CONST wchar_t * little)
-{
-  _CONST wchar_t *p;
-  _CONST wchar_t *q;
-  _CONST wchar_t *r;
-
-  if (!*little)
-    {
-      /* LINTED interface specification */
-      return (wchar_t *) big;
-    }
-  if (wcslen (big) < wcslen (little))
-    return NULL;
-
-  p = big;
-  q = little;
-  while (*p)
-    {
-      q = little;
-      r = p;
-      while (*q)
-	{
-	  if (*r != *q)
-	    break;
-	  q++;
-	  r++;
-	}
-      if (!*q)
-	{
-	  /* LINTED interface specification */
-	  return (wchar_t *) p;
-	}
-      p++;
-    }
-  return NULL;
-}
diff --git a/newlib/libc/string/wcstrings.tex b/newlib/libc/string/wcstrings.tex
deleted file mode 100644
index ad0a60788..000000000
--- a/newlib/libc/string/wcstrings.tex
+++ /dev/null
@@ -1,106 +0,0 @@
-@node Wchar strings
-@chapter Wide Character Strings (@file{wchar.h})
-
-This chapter describes wide-character string-handling functions and
-managing areas of memory containing wide-characters.  The corresponding 
-declarations are in @file{wchar.h}.
-
-@menu
-* wmemchr::     Find wide-character in memory
-* wmemcmp::     Compare two wide-character memory areas
-* wmemcpy::     Copy wide-character memory regions
-* wmemmove::    Move possibly overlapping wide-character memory
-* wmemset::     Set an area of memory to a specified wide-character
-* wcscat::      Concatenate wide-character strings
-* wcschr::      Search for wide-character in string
-* wcscmp::      Wide-character string compare
-* wcscoll::     Locale specific Wide-character string compare
-* wcscpy::      Copy wide-character string
-* wcscspn::     Count wide-chars not in string
-* wcslcat::     Concatenate wide-character strings to specified length
-* wcslcpy::     Copy wide-character string to specified length
-* wcslen::      Wide-character string length
-* wcsncat::     Concatenate wide-character strings
-* wcsncmp::     Wide-character string compare
-* wcsncpy::     Counted copy wide-character string
-* wcsnlen::     Wide-character string length with maximum limit
-* wcspbrk::     Find wide-chars in string
-* wcsrchr::     Reverse search for wide-character in string
-* wcsspn::      Find initial match in wide-character string
-* wcsstr::      Find wide-character string segment
-* wcswidth::    Number of column positions of a wide-character string
-* wcwidth::     Number of column positions of a wide-character code
-@end menu
-
-@page
-@include string/wmemchr.def
-
-@page
-@include string/wmemcmp.def
-
-@page
-@include string/wmemcpy.def
-
-@page
-@include string/wmemmove.def
-
-@page
-@include string/wmemset.def
-
-@page
-@include string/wcscat.def
-
-@page
-@include string/wcschr.def
-
-@page
-@include string/wcscmp.def
-
-@page
-@include string/wcscoll.def
-
-@page
-@include string/wcscpy.def
-
-@page
-@include string/wcscspn.def
-
-@page
-@include string/wcslcat.def
-
-@page
-@include string/wcslcpy.def
-
-@page
-@include string/wcslen.def
-
-@page
-@include string/wcsncat.def
-
-@page
-@include string/wcsncmp.def
-
-@page
-@include string/wcsncpy.def
-
-@page
-@include string/wcsnlen.def
-
-@page
-@include string/wcspbrk.def
-
-@page
-@include string/wcsrchr.def
-
-@page
-@include string/wcsspn.def
-
-@page
-@include string/wcsstr.def
-
-@page
-@include string/wcswidth.def
-
-@page
-@include string/wcwidth.def
-
diff --git a/newlib/libc/string/wcswidth.c b/newlib/libc/string/wcswidth.c
deleted file mode 100644
index bd3d9bbad..000000000
--- a/newlib/libc/string/wcswidth.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-FUNCTION
-	<<wcswidth>>---number of column positions of a wide-character string
-	
-INDEX
-	wcswidth
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wcswidth(const wchar_t *<[pwcs]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	int wcswidth(<[pwcs]>, <[n]>)
-	wchar_t *<[wc]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wcswidth>> function shall determine the number of column
-	positions required for n wide-character codes (or fewer than n
-	wide-character codes if a null wide-character code is encountered
-	before n wide-character codes are exhausted) in the string pointed
-	to by pwcs.
-
-RETURNS
-	The <<wcswidth>> function either shall return 0 (if pwcs points to a
-	null wide-character code), or return the number of column positions
-	to be occupied by the wide-character string pointed to by pwcs, or
-	return -1 (if any of the first n wide-character codes in the
-	wide-character string pointed to by pwcs is not a printable
-	wide-character code).
-
-PORTABILITY
-<<wcswidth>> has been introduced in the Single UNIX Specification Volume 2
-<<wcswidth>> has been marked as extension in Single UNIX Specification Volume 3
-*/
-
-#include <_ansi.h>
-#include <wchar.h>
-
-int
-_DEFUN (wcswidth, (pwcs, n),
-	_CONST wchar_t *pwcs _AND
-	size_t n)
-
-{
-  int w, len = 0;
-  if (!pwcs || n == 0)
-    return 0;
-  do {
-    if ((w = wcwidth (*pwcs)) < 0)
-      return -1;
-    len += w;
-  } while (*pwcs++ && --n > 0);
-  return len;
-}
diff --git a/newlib/libc/string/wcwidth.c b/newlib/libc/string/wcwidth.c
deleted file mode 100644
index 2cbd59e18..000000000
--- a/newlib/libc/string/wcwidth.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-FUNCTION
-	<<wcwidth>>---number of column positions of a wide-character code
-	
-INDEX
-	wcwidth
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wcwidth(const wchar_t <[wc]>);
-
-TRAD_SYNOPSIS
-	#include <wchar.h>
-	int wcwidth(<[wc]>)
-	wchar_t *<[wc]>;
-
-DESCRIPTION
-	The <<wcwidth>> function shall determine the number of column
-	positions required for the wide character wc. The application
-	shall ensure that the value of wc is a character representable
-	as a wchar_t, and is a wide-character code corresponding to a
-	valid character in the current locale.
-
-RETURNS
-	The <<wcwidth>> function shall either return 0 (if wc is a null
-	wide-character code), or return the number of column positions to
-	be occupied by the wide-character code wc, or return -1 (if wc
-	does not correspond to a printable wide-character code).
-
-	The current implementation of <<wcwidth>> simply sets the width
-	of all printable characters to 1 since newlib has no character
-	tables around.
-
-PORTABILITY
-<<wcwidth>> has been introduced in the Single UNIX Specification Volume 2
-<<wcwidth>> has been marked as extension in Single UNIX Specification Volume 3
-*/
-
-#include <_ansi.h>
-#include <wchar.h>
-#include <wctype.h>
-
-int
-_DEFUN (wcwidth, (wc),
-	_CONST wchar_t wc)
-
-{
-  if (iswprint (wc))
-    return 1;
-  if (iswcntrl (wc) || wc == L'\0')
-    return 0;
-  return -1;
-}
diff --git a/newlib/libc/string/wmemchr.c b/newlib/libc/string/wmemchr.c
deleted file mode 100644
index e99991324..000000000
--- a/newlib/libc/string/wmemchr.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-FUNCTION
-	<<wmemchr>>---find a wide-character in memory
- 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t	*wmemchr(const wchar_t *<[s]>, wchar_t <[c]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	wchar_t	*wmemchr(<[s]>, <[c]>, <[n]>
-	const wchar_t *<[s]>;
-	wchar_t <[c]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wmemchr>> function locates the first occurrence of <[c]> in the
-	initial <[n]> wide-characters of the object pointed to be <[s]>. This
-	function is not affected by locale and all wchar_t values are treated
-	identically.  The null wide-character and wchar_t values not
-	corresponding to valid characters are not treated specially.
-
-	If <[n]> is zero, <[s]> must be a valid pointer and the function
-	behaves as if no valid occurrence of <[c]> is found. 
-
-RETURNS
-	The <<wmemchr>> function returns a pointer to the located
-	wide-character, or a null pointer if the wide-character does not occur
-	in the object. 
-
-PORTABILITY
-<<wmemchr>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wmemchr.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wmemchr.c,v 1.2 2000/12/20 14:08:31 itojun Exp
- */
-
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wmemchr, (s, c, n),
-	_CONST wchar_t * s _AND
-	wchar_t c _AND
-	size_t n)
-{
-  size_t i;
-
-  for (i = 0; i < n; i++)
-    {
-      if (*s == c)
-	{
-	  /* LINTED const castaway */
-	  return (wchar_t *) s;
-	}
-      s++;
-    }
-  return NULL;
-}
diff --git a/newlib/libc/string/wmemcmp.c b/newlib/libc/string/wmemcmp.c
deleted file mode 100644
index 51072942c..000000000
--- a/newlib/libc/string/wmemcmp.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-FUNCTION
-	<<wmemcmp>>---compare wide-characters in memory 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	int wmemcmp(const wchar_t *<[s1]>, const wchar_t *<[s2]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	int wmemcmp(<[s1]>, <[s2]>, <[n]>
-	const wchar_t *<[s1]>;
-	const wchar_t *<[s2]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wmemcmp>> function compares the first <[n]> wide-characters of the
-	object pointed to by <[s1]> to the first <[n]> wide-characters of the
-	object pointed to by <[s2]>. This function is not affected by locale
-	and all wchar_t values are treated identically. The null wide-character
-	and wchar_t values not corresponding to valid characters are not treated
-	specially.
-
-	If <[n]> is zero, <[s1]> and <[s2]> must be a valid pointers and the
-	function behaves as if the two objects compare equal. 
-
-RETURNS
-	The <<wmemcmp>> function returns an integer greater than, equal to,
-	or less than zero, accordingly as the object pointed to by <[s1]> is
-	greater than, equal to, or less than the object pointed to by <[s2]>.
-
-PORTABILITY
-<<wmemcmp>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wmemcmp.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wmemcmp.c,v 1.2 2000/12/20 14:08:31 itojun Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-int
-_DEFUN (wmemcmp, (s1, s2, n),
-	_CONST wchar_t * s1 _AND
-	_CONST wchar_t * s2 _AND
-	size_t n)
-{
-  size_t i;
-
-  for (i = 0; i < n; i++)
-    {
-      if (*s1 != *s2)
-	{
-	  /* wchar might be unsigned */
-	  return *s1 > *s2 ? 1 : -1;
-	}
-      s1++;
-      s2++;
-    }
-  return 0;
-}
diff --git a/newlib/libc/string/wmemcpy.c b/newlib/libc/string/wmemcpy.c
deleted file mode 100644
index c3a96a32d..000000000
--- a/newlib/libc/string/wmemcpy.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
-FUNCTION
-	<<wmemcpy>>---copy wide-characters in memory 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wmemcpy(wchar_t *<[d]>, const wchar_t *<[s]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wmemcpy(<[d]>, <[s]>, <[n]>
-	wchar_t *<[d]>;
-	const wchar_t *<[s]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wmemcpy>> function copies <[n]> wide-characters from the object
-	pointed to by <[s]> to the object pointed to be <[d]>. This function
-	is not affected by locale and all wchar_t values are treated
-	identically.  The null wide-character and wchar_t values not
-	corresponding to valid characters are not treated specially.
-
-	If <[n]> is zero, <[d]> and <[s]> must be a valid pointers, and the
-	function copies zero wide-characters. 
-
-RETURNS
-	The <<wmemcpy>> function returns the value of <[d]>.
-
-PORTABILITY
-<<wmemcpy>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wmemcpy.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wmemcpy.c,v 1.2 2000/12/20 14:08:31 itojun Exp
- */
-
-#include <_ansi.h>
-#include <string.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wmemcpy, (d, s, n),
-	wchar_t * d _AND
-	_CONST wchar_t * s _AND
-	size_t n)
-{
-
-  return (wchar_t *) memcpy (d, s, n * sizeof (wchar_t));
-}
diff --git a/newlib/libc/string/wmemmove.c b/newlib/libc/string/wmemmove.c
deleted file mode 100644
index f49e359f3..000000000
--- a/newlib/libc/string/wmemmove.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-FUNCTION
-	<<wmemmove>>---wmemmove - copy wide-characters in memory with overlapping areas 
-
-ANSI_SYNOPSIS
-	#include <wchar.h>
-	wchar_t *wmemmove(wchar_t *<[d]>, const wchar_t *<[s]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-	wchar_t *wmemmove(<[d]>, <[s]>, <[n]>
-	wchar_t *<[d]>;
-	const wchar_t *<[s]>;
-	size_t <[n]>;
-
-DESCRIPTION
-	The <<wmemmove>> function copies <[n]> wide-characters from the object
-	pointed to by <[s]> to the object pointed to by <[d]>. Copying takes
-	place as if the <[n]> wide-characters from the object pointed to by
-	<[s]> are first copied into a temporary array of <[n]> wide-characters
-	that does not overlap the objects pointed to by <[d]> or <[s]>, and then
-	the <[n]> wide-characters from the temporary array are copied into the
-	object pointed to by <[d]>.
-
-	This function is not affected by locale and all wchar_t values are
-	treated identically. The null wide-character and wchar_t values not
-	corresponding to valid characters are not treated specially.
-
-	If <[n]> is zero, <[d]> and <[s]> must be a valid pointers, and the
-	function copies zero wide-characters. 
-
-RETURNS
-	The <<wmemmove>> function returns the value of <[d]>.
-
-PORTABILITY
-<<wmemmove>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*	$NetBSD: wmemmove.c,v 1.1 2000/12/23 23:14:37 itojun Exp $	*/
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wmemmove.c,v 1.2 2000/12/20 14:08:31 itojun Exp
- */
-
-#include <_ansi.h>
-#include <string.h>
-#include <wchar.h>
-
-wchar_t *
-_DEFUN (wmemmove, (d, s, n),
-	wchar_t * d _AND
-	_CONST wchar_t * s _AND
-	size_t n)
-{
-
-  return (wchar_t *) memmove (d, s, n * sizeof (wchar_t));
-}
diff --git a/newlib/libc/string/wmemset.c b/newlib/libc/string/wmemset.c
deleted file mode 100644
index 4e05b93b6..000000000
--- a/newlib/libc/string/wmemset.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-FUNCTION
-       <<wmemset>>---set wide-characters in memory 
-
-ANSI_SYNOPSIS
-       #include <wchar.h>
-       wchar_t *wmemset(wchar_t *<[s]>, wchar_t <[c]>, size_t <[n]>);
-
-TRAD_SYNOPSIS
-       wchar_t *wmemset(<[s]>, <[c]>, <[n]>
-       wchar_t *<[s]>;
-       wchar_t <[c]>;
-       size_t <[n]>;
-
-DESCRIPTION
-       The <<wmemset>> function copies the value of <[c]> into each of the
-       first <[n]> wide-characters of the object pointed to by <[s]>.  This
-       function is not affected by locale and all wchar_t values are treated
-       identically.  The null wide-character and wchar_t values not
-       corresponding to valid characters are not treated specially.
-
-       If <[n]> is zero, <[s]> must be a valid pointer and the function
-       copies zero wide-characters.
-
-RETURNS
-       The <<wmemset>> functions returns the value of <[s]>.
-
-PORTABILITY
-<<wmemset>> is ISO/IEC 9899/AMD1:1995 (ISO C).
-No supporting OS subroutines are required.
-*/
-
-/*     $NetBSD: wmemset.c,v 1.1 2000/12/23 23:14:37 itojun Exp $       */
-
-/*-
- * Copyright (c)1999 Citrus Project,
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	citrus Id: wmemset.c,v 1.2 2000/12/20 14:08:31 itojun Exp
- */
-
-#include <_ansi.h>
-#include <wchar.h>
-
-wchar_t	*
-_DEFUN(wmemset, (s, c, n),
-	wchar_t *s _AND
-	wchar_t c _AND
-	size_t n)
-{
-	size_t i;
-	wchar_t *p;
-
-	p = (wchar_t *)s;
-	for (i = 0; i < n; i++) {
-		*p = c;
-		p++;
-	}
-	return s;
-}
diff --git a/newlib/libc/sys.tex b/newlib/libc/sys.tex
deleted file mode 100644
index 362732ace..000000000
--- a/newlib/libc/sys.tex
+++ /dev/null
@@ -1,477 +0,0 @@
-@c                                           -*- Texinfo -*-
-@node Syscalls
-@chapter System Calls
-
-@cindex linking the C library
-The C subroutine library depends on a handful of subroutine calls for
-operating system services.  If you use the C library on a system that
-complies with the POSIX.1 standard (also known as IEEE 1003.1), most of
-these subroutines are supplied with your operating system.
-
-If some of these subroutines are not provided with your system---in
-the extreme case, if you are developing software for a ``bare board''
-system, without an OS---you will at least need to provide do-nothing
-stubs (or subroutines with minimal functionality) to allow your
-programs to link with the subroutines in @code{libc.a}.
-
-@menu
-* Stubs::		Definitions for OS interface
-* Reentrant Syscalls::	Reentrant covers for OS subroutines
-@end menu
-
-@node Stubs
-@section Definitions for OS interface
-@cindex stubs
-
-@cindex subroutines for OS interface
-@cindex OS interface subroutines
-This is the complete set of system definitions (primarily subroutines)
-required; the examples shown implement the minimal functionality
-required to allow @code{libc} to link, and fail gracefully where OS
-services are not available.  
-
-Graceful failure is permitted by returning an error code.  A minor
-complication arises here: the C library must be compatible with
-development environments that supply fully functional versions of these
-subroutines.  Such environments usually return error codes in a global
-@code{errno}.  However, the Cygnus C library provides a @emph{macro}
-definition for @code{errno} in the header file @file{errno.h}, as part
-of its support for reentrant routines (@pxref{Reentrancy,,Reentrancy}).
-
-@cindex @code{errno} global vs macro
-The bridge between these two interpretations of @code{errno} is
-straightforward: the C library routines with OS interface calls
-capture the @code{errno} values returned globally, and record them in
-the appropriate field of the reentrancy structure (so that you can query
-them using the @code{errno} macro from @file{errno.h}).
-
-This mechanism becomes visible when you write stub routines for OS
-interfaces.   You must include @file{errno.h}, then disable the macro,
-like this:
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-@end example
-
-@noindent
-The examples in this chapter include this treatment of @code{errno}.
-
-@ftable @code
-@item _exit
-Exit a program without cleaning up files.  If your system doesn't
-provide this, it is best to avoid linking with subroutines that require
-it (@code{exit}, @code{system}).
-
-@item close
-Close a file.  Minimal implementation:
-
-@example
-int close(int file)@{
-    return -1;
-@}
-@end example
-
-@item environ
-A pointer to a list of environment variables and their values.  For a
-minimal environment, this empty list is adequate:
-
-@example
-char *__env[1] = @{ 0 @};
-char **environ = __env;
-@end example
-
-@item execve
-Transfer control to a new process.  Minimal implementation (for a system
-without processes):
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int execve(char *name, char **argv, char **env)@{
-  errno=ENOMEM;
-  return -1;
-@}
-@end example
-
-@item fork
-Create a new process.  Minimal implementation (for a system without processes):
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int fork() @{
-  errno=EAGAIN;
-  return -1;
-@}
-@end example
-
-@item fstat
-Status of an open file.  For consistency with other minimal
-implementations in these examples, all files are regarded as character
-special devices.  The @file{sys/stat.h} header file required is
-distributed in the @file{include} subdirectory for this C library.
-
-@example
-#include <sys/stat.h>
-int fstat(int file, struct stat *st) @{
-  st->st_mode = S_IFCHR;
-  return 0;
-@}
-@end example
-
-@item getpid
-Process-ID; this is sometimes used to generate strings unlikely to
-conflict with other processes.  Minimal implementation, for a system
-without processes:
-
-@example
-int getpid() @{
-  return 1;
-@}
-@end example
-
-@item isatty
-Query whether output stream is a terminal.   For consistency with the
-other minimal implementations, which only support output to
-@code{stdout}, this minimal implementation is suggested:
-
-@example
-int isatty(int file)@{
-   return 1;
-@}
-@end example
-
-@item kill
-Send a signal.  Minimal implementation:
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int kill(int pid, int sig)@{
-  errno=EINVAL;
-  return(-1);
-@}
-@end example
-
-@item link
-Establish a new name for an existing file.  Minimal implementation:
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int link(char *old, char *new)@{
-  errno=EMLINK;
-  return -1;
-@}
-@end example
-
-@item lseek
-Set position in a file.  Minimal implementation:
-
-@example
-int lseek(int file, int ptr, int dir)@{
-    return 0;
-@}
-@end example
-
-@item open
-Open a file.  Minimal implementation:
-
-@example
-int open(const char *name, int flags, int mode)@{
-    return -1;
-@}
-@end example
-
-@item read
-Read from a file.  Minimal implementation:
-
-@example
-int read(int file, char *ptr, int len)@{
-    return 0;
-@}
-@end example
-
-@item sbrk
-Increase program data space.  As @code{malloc} and related functions
-depend on this, it is useful to have a working implementation.  The
-following suffices for a standalone system; it exploits the symbol
-@code{end} automatically defined by the GNU linker.
-
-@example
-@group
-caddr_t sbrk(int incr)@{
-  extern char end;		/* @r{Defined by the linker} */
-  static char *heap_end;
-  char *prev_heap_end;
- 
-  if (heap_end == 0) @{
-    heap_end = &end;
-  @}
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    @{
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    @}
-
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-@}
-@end group
-@end example
-
-@item stat
-Status of a file (by name).  Minimal implementation:
-
-@example
-int stat(char *file, struct stat *st) @{
-  st->st_mode = S_IFCHR;
-  return 0;
-@}
-@end example
-
-@item times
-Timing information for current process.  Minimal implementation:
-
-@example
-int times(struct tms *buf)@{
-  return -1;
-@}
-@end example
-
-@item unlink
-Remove a file's directory entry.  Minimal implementation:
-
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int unlink(char *name)@{
-  errno=ENOENT;
-  return -1; 
-@}
-@end example
-
-@item wait
-Wait for a child process.  Minimal implementation:
-@example
-#include <errno.h>
-#undef errno
-extern int errno;
-int wait(int *status) @{
-  errno=ECHILD;
-  return -1;
-@}
-@end example
-
-@item write
-Write a character to a file.  @file{libc} subroutines will use this
-system routine for output to all files, @emph{including}
-@code{stdout}---so if you need to generate any output, for example to a
-serial port for debugging, you should make your minimal @code{write}
-capable of doing this.  The following minimal implementation is an
-incomplete example; it relies on a @code{writechar} subroutine (not
-shown; typically, you must write this in assembler from examples
-provided by your hardware manufacturer) to actually perform the output.
-
-@example
-@group
-int write(int file, char *ptr, int len)@{
-    int todo;
-  
-    for (todo = 0; todo < len; todo++) @{
-        writechar(*ptr++);
-    @}
-    return len;
-@}
-@end group
-@end example
-
-@end ftable
-
-@page
-@node Reentrant Syscalls
-@section Reentrant covers for OS subroutines
-
-Since the system subroutines are used by other library routines that
-require reentrancy, @file{libc.a} provides cover routines (for example,
-the reentrant version of @code{fork} is @code{_fork_r}).  These cover
-routines are consistent with the other reentrant subroutines in this
-library, and achieve reentrancy by using a reserved global data block
-(@pxref{Reentrancy,,Reentrancy}).
-
-@c FIXME!!! The following ignored text specifies how this section ought
-@c to work;  however, both standalone info and Emacs info mode fail when
-@c confronted with nodes beginning `_' as of 24may93.  Restore when Info
-@c readers fixed!
-@ignore
-@menu
-* _open_r::	Reentrant version of open
-* _close_r::	Reentrant version of close
-* _lseek_r::	Reentrant version of lseek
-* _read_r::	Reentrant version of read
-* _write_r::	Reentrant version of write
-* _link_r::     Reentrant version of link
-* _unlink_r::   Reentrant version of unlink
-* _stat_r::     Reentrant version of stat
-* _fstat_r::    Reentrant version of fstat
-* _sbrk_r::     Reentrant version of sbrk
-* _fork_r::	Reentrant version of fork
-* _wait_r::	Reentrant version of wait
-@end menu
-
-@down
-@include reent/filer.def
-@include reent/execr.def
-@include reent/statr.def
-@include reent/fstatr.def
-@include reent/linkr.def
-@include reent/unlinkr.def
-@include reent/sbrkr.def
-@up
-@end ignore
-
-@ftable @code
-@item _open_r
-A reentrant version of @code{open}.  It takes a pointer
-to the global data block, which holds @code{errno}.
-
-@example
-int _open_r(void *@var{reent},
-    const char *@var{file}, int @var{flags}, int @var{mode});
-@end example
-
-@ifset STDIO64
-@item _open64_r
-A reentrant version of @code{open64}.  It takes a pointer
-to the global data block, which holds @code{errno}.
-
-@example
-int _open64_r(void *@var{reent},
-    const char *@var{file}, int @var{flags}, int @var{mode});
-@end example
-@end ifset
-
-@item _close_r
-A reentrant version of @code{close}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _close_r(void *@var{reent}, int @var{fd});
-@end example
-
-@item _lseek_r
-A reentrant version of @code{lseek}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-off_t _lseek_r(void *@var{reent},
-    int @var{fd}, off_t @var{pos}, int @var{whence});
-@end example
-
-@ifset STDIO64
-@item _lseek64_r
-A reentrant version of @code{lseek64}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-off_t _lseek64_r(void *@var{reent},
-    int @var{fd}, off_t @var{pos}, int @var{whence});
-@end example
-@end ifset
-
-@item _read_r
-A reentrant version of @code{read}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-long _read_r(void *@var{reent},
-    int @var{fd}, void *@var{buf}, size_t @var{cnt});
-@end example
-
-@item _write_r
-A reentrant version of @code{write}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-long _write_r(void *@var{reent},
-    int @var{fd}, const void *@var{buf}, size_t @var{cnt});
-@end example
-
-@item _fork_r
-A reentrant version of @code{fork}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _fork_r(void *@var{reent});
-@end example
-
-@item _wait_r
-A reentrant version of @code{wait}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _wait_r(void *@var{reent}, int *@var{status});
-@end example
-
-@item _stat_r
-A reentrant version of @code{stat}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _stat_r(void *@var{reent},
-    const char *@var{file}, struct stat *@var{pstat});
-@end example
-
-@item _fstat_r
-A reentrant version of @code{fstat}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _fstat_r(void *@var{reent},
-    int @var{fd}, struct stat *@var{pstat});
-@end example
-
-@ifset STDIO64
-@item _fstat64_r
-A reentrant version of @code{fstat64}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _fstat64_r(void *@var{reent},
-    int @var{fd}, struct stat *@var{pstat});
-@end example
-@end ifset
-
-@item _link_r
-A reentrant version of @code{link}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _link_r(void *@var{reent},
-    const char *@var{old}, const char *@var{new});
-@end example
-
-@item _unlink_r
-A reentrant version of @code{unlink}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-int _unlink_r(void *@var{reent}, const char *@var{file});
-@end example
-
-@item _sbrk_r
-A reentrant version of @code{sbrk}.  It takes a pointer to the global
-data block, which holds @code{errno}.
-
-@example
-char *_sbrk_r(void *@var{reent}, size_t @var{incr});
-@end example
-@end ftable
diff --git a/newlib/libc/sys/Makefile.am b/newlib/libc/sys/Makefile.am
deleted file mode 100644
index b67d0ecdf..000000000
--- a/newlib/libc/sys/Makefile.am
+++ /dev/null
@@ -1,37 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(sys_dir) .
-
-if HAVE_SYS_DIR
-SYSLIB = lib.a
-endif
-
-noinst_DATA = $(CRT0)
-
-if USE_LIBTOOL
-else
-noinst_LIBRARIES = $(SYSLIB)
-
-lib.a: $(sys_dir)/lib.a
-	rm -f $@
-	ln $(sys_dir)/lib.a $@ >/dev/null 2>/dev/null \
-	 || cp $(sys_dir)/lib.a $@
-endif # USE_LIBTOOL
-
-$(sys_dir)/libsys.$(aext): ; @true
-
-$(CRT0): $(sys_dir)/$(CRT0)
-	rm -f $@
-	ln $(sys_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(sys_dir)/$(CRT0) $@
-
-$(sys_dir)/$(CRT0): ; @true
-
-CLEANFILES = $(CRT0)
-
-doc:
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/Makefile.in b/newlib/libc/sys/Makefile.in
deleted file mode 100644
index 30c99b7a9..000000000
--- a/newlib/libc/sys/Makefile.in
+++ /dev/null
@@ -1,463 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(sys_dir) .
-
-@HAVE_SYS_DIR_TRUE@SYSLIB = @HAVE_SYS_DIR_TRUE@lib.a
-
-noinst_DATA = $(CRT0)
-
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@$(SYSLIB)
-
-CLEANFILES = $(CRT0)
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_SOURCES = lib.a.c
-lib_a_OBJECTS =  lib.a.$(OBJEXT)
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = lib.a.c
-OBJECTS = lib.a.$(OBJEXT)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../../acinclude.m4 \
-		../../aclocal.m4 ../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(DATA)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-@USE_LIBTOOL_FALSE@lib.a: $(sys_dir)/lib.a
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	ln $(sys_dir)/lib.a $@ >/dev/null 2>/dev/null \
-@USE_LIBTOOL_FALSE@	 || cp $(sys_dir)/lib.a $@
-
-$(sys_dir)/libsys.$(aext): ; @true
-
-$(CRT0): $(sys_dir)/$(CRT0)
-	rm -f $@
-	ln $(sys_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(sys_dir)/$(CRT0) $@
-
-$(sys_dir)/$(CRT0): ; @true
-
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/a29khif/Makefile.am b/newlib/libc/sys/a29khif/Makefile.am
deleted file mode 100644
index 48f389695..000000000
--- a/newlib/libc/sys/a29khif/Makefile.am
+++ /dev/null
@@ -1,48 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	_alloc.s	\
-	_close.s	\
-	_cycles.s	\
-	_exit.s		\
-	_getpsiz.s	\
-	_gettz.s	\
-	_ioctl.s	\
-	_iostat.s	\
-	_iowait.s	\
-	_lseek.s	\
-	_open.s		\
-	_query.s	\
-	_read.s		\
-	_setim.s	\
-	_settrap.s	\
-	_setvec.s	\
-	_tmpnam.s	\
-	_write.s	\
-	alloc.s		\
-	clock.s		\
-	getargs.s	\
-	getenv.s	\
-	read.s		\
-	remove.s	\
-	rename.s	\
-	signal.s	\
-	_sbrk.s 	\
-	_fstat.s 	\
-	_isatty.s 	\
-	systime.s	\
-	vec.s		\
-	kill.c		\
-	getpid.c	\
-	stubs.s
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/a29khif/Makefile.in b/newlib/libc/sys/a29khif/Makefile.in
deleted file mode 100644
index ea5b3d073..000000000
--- a/newlib/libc/sys/a29khif/Makefile.in
+++ /dev/null
@@ -1,368 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	_alloc.s	\
-	_close.s	\
-	_cycles.s	\
-	_exit.s		\
-	_getpsiz.s	\
-	_gettz.s	\
-	_ioctl.s	\
-	_iostat.s	\
-	_iowait.s	\
-	_lseek.s	\
-	_open.s		\
-	_query.s	\
-	_read.s		\
-	_setim.s	\
-	_settrap.s	\
-	_setvec.s	\
-	_tmpnam.s	\
-	_write.s	\
-	alloc.s		\
-	clock.s		\
-	getargs.s	\
-	getenv.s	\
-	read.s		\
-	remove.s	\
-	rename.s	\
-	signal.s	\
-	_sbrk.s 	\
-	_fstat.s 	\
-	_isatty.s 	\
-	systime.s	\
-	vec.s		\
-	kill.c		\
-	getpid.c	\
-	stubs.s
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  _alloc.o _close.o _cycles.o _exit.o _getpsiz.o _gettz.o \
-_ioctl.o _iostat.o _iowait.o _lseek.o _open.o _query.o _read.o _setim.o \
-_settrap.o _setvec.o _tmpnam.o _write.o alloc.o clock.o getargs.o \
-getenv.o read.o remove.o rename.o signal.o _sbrk.o _fstat.o _isatty.o \
-systime.o vec.o kill.o getpid.o stubs.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/a29khif/_alloc.s b/newlib/libc/sys/a29khif/_alloc.s
deleted file mode 100644
index ecdd1ddb1..000000000
--- a/newlib/libc/sys/a29khif/_alloc.s
+++ /dev/null
@@ -1,55 +0,0 @@
-; @(#)_alloc.s	1.4 90/10/14 21:57:19, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-;	07/06/89 (JS) Replaced call to const tav,HIF_macro @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 to syscall macro,
-;		 and deleted call to reterr macro as a NULL needs to be
-;		 returned on failure.
-; _alloc.s
-;	void *vp = _sysalloc( int size );
-;
-	.file	"_alloc.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__sysalloc
-__sysalloc:
-	  const tav,HIF_alloc @ asneq V_SYSCALL,gr1,gr1
-	  jmpti         tav, lr0
-	  const        tpc, _errno
-	  consth       tpc, _errno
-	  store        0, 0, tav, tpc
-	  jmpi         lr0
-	  const		v0, 0			; return NULL on error.
-
-;
-;	int errret = _sysfree( void *addr, int size );
-;
-	.global	__sysfree
-__sysfree:
-	const tav,HIF_free @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_close.s b/newlib/libc/sys/a29khif/_close.s
deleted file mode 100644
index 04f52ae00..000000000
--- a/newlib/libc/sys/a29khif/_close.s
+++ /dev/null
@@ -1,40 +0,0 @@
-; @(#)_close.s	1.4 90/10/14 21:57:20, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _close.s
-;	int cc = _close( int fd );
-;
-	.file	"_close.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__close
-;; syscalls used now -- 	.global	_close
-
-__close:
-;; syscalls used now -- _close:
-	const tav,HIF_close @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_cycles.s b/newlib/libc/sys/a29khif/_cycles.s
deleted file mode 100644
index 94f9df3b4..000000000
--- a/newlib/libc/sys/a29khif/_cycles.s
+++ /dev/null
@@ -1,39 +0,0 @@
-;  @(#)_cycles.s	1.2 90/10/14 21:57:21, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _cycles.s
-;	struct { unsigned long low_ticks, long hi_ticks } = _cycles( );
-;
-	.file	"_cycles.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00020000		; Debugger tag word
-	.global	__cycles
-
-__cycles:
-	const tav,HIF_cycles @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_exit.s b/newlib/libc/sys/a29khif/_exit.s
deleted file mode 100644
index 65b9b83e3..000000000
--- a/newlib/libc/sys/a29khif/_exit.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_exit.s	1.2 90/10/14 21:57:22, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _exit.s
-;	_exit( int rc );
-;
-	.file	"_exit.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__exit
-
-__exit:
-	const tav,HIF_exit @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_fstat.s b/newlib/libc/sys/a29khif/_fstat.s
deleted file mode 100644
index 0144d76d9..000000000
--- a/newlib/libc/sys/a29khif/_fstat.s
+++ /dev/null
@@ -1,79 +0,0 @@
-	.file "_fstat.c"
-	.sect .lit,lit
-gcc2_compiled.:
-	.text
-	.align 4
-	.global __fstat
-;; syscalls used now -- 	.global _fstat
-	.word 0x40000
-__fstat:
-;; syscalls used now -- _fstat:
-	sub gr1,gr1,32
-	asgeu V_SPILL,gr1,gr126
-	add lr1,gr1,48
-	sll lr5,lr10,0
-	const gr116,__iostat
-	consth gr116,__iostat
-	calli lr0,gr116
-	sll lr2,lr5,0
-	sll lr10,gr96,0
-	jmpt lr10,L8
-	sll gr116,lr10,30
-	jmpf gr116,L3
-	add gr116,lr11,12
-	add gr117,lr11,12
-	const gr116,4096
-	store 0,0,gr116,gr117
-	add gr117,lr11,4
-	const gr116,1
-	jmp L4
-	store 0,0,gr116,gr117
-L3:
-	const gr117,8192
-	store 0,0,gr117,gr116
-	add gr116,lr11,4
-	store 0,0,gr117,gr116
-L4:
-	add gr117,lr11,20
-	const gr116,0
-	store 0,0,gr116,gr117
-	store 0,0,gr116,lr11
-	const gr116,_time
-	consth gr116,_time
-	calli lr0,gr116
-	const lr2,0
-	add gr116,lr11,16
-	store 0,0,gr96,gr116
-	sll lr2,lr5,0
-	const lr3,0
-	const lr7,__lseek
-	consth lr7,__lseek
-	calli lr0,lr7
-	const lr4,1
-	sll lr10,gr96,0
-	constn lr6,65535
-	cpneq gr116,lr10,lr6
-	jmpf gr116,L7
-	sll lr2,lr5,0
-	const lr3,0
-	calli lr0,lr7
-	const lr4,2
-	add gr116,lr11,8
-	store 0,0,gr96,gr116
-	cpneq gr96,gr96,lr6
-	jmpf gr96,L7
-	sll lr2,lr5,0
-	sll lr3,lr10,0
-	calli lr0,lr7
-	const lr4,0
-	cpneq gr96,gr96,lr6
-	jmpt gr96,L8
-	const gr96,0
-L7:
-	constn gr96,65535
-L8:
-	add gr1,gr1,32
-	nop
-	jmpi lr0
-	asleu V_FILL,lr1,gr127
-
diff --git a/newlib/libc/sys/a29khif/_getpsiz.s b/newlib/libc/sys/a29khif/_getpsiz.s
deleted file mode 100644
index b9949a003..000000000
--- a/newlib/libc/sys/a29khif/_getpsiz.s
+++ /dev/null
@@ -1,38 +0,0 @@
-; @(#)_getpsiz.s	1.2 90/10/14 21:57:23, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _getpsiz.s
-;	int size = _getpsiz( );
-;
-	.file	"_getpsiz.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00020000		; Debugger tag word
-	.global	__getpsiz
-
-__getpsiz:
-	const tav,HIF_getpagesize @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.end
diff --git a/newlib/libc/sys/a29khif/_gettz.s b/newlib/libc/sys/a29khif/_gettz.s
deleted file mode 100644
index 36cf1c702..000000000
--- a/newlib/libc/sys/a29khif/_gettz.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_gettz.s	2.2 90/10/14 21:57:24, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _gettz.s
-;	_gettz( void );
-;
-	.file	"_gettz.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00020000		; Debugger tag word
-	.global	__gettz
-
-__gettz:
-	const tav,HIF_gettz @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_ioctl.s b/newlib/libc/sys/a29khif/_ioctl.s
deleted file mode 100644
index 0ca51c504..000000000
--- a/newlib/libc/sys/a29khif/_ioctl.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_ioctl.s	1.2 90/10/14 21:57:25, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _ioctl.s
-;	_ioctl( int fd );
-;
-	.file	"_ioctl.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__ioctl
-
-__ioctl:
-	const tav,HIF_ioctl @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_iostat.s b/newlib/libc/sys/a29khif/_iostat.s
deleted file mode 100644
index ae97c5de5..000000000
--- a/newlib/libc/sys/a29khif/_iostat.s
+++ /dev/null
@@ -1,43 +0,0 @@
-;----------------------------------------------------------------------------
-; 
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _iostat.s
-;	_iostat( int fd );
-;
-	.file	"_iostat.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__iostat
-	.global	_iostat
-
-__iostat:
-_iostat:
-	const tav,HIF_iostat @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
-
diff --git a/newlib/libc/sys/a29khif/_iowait.s b/newlib/libc/sys/a29khif/_iowait.s
deleted file mode 100644
index 3e2ad61cd..000000000
--- a/newlib/libc/sys/a29khif/_iowait.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_iowait.s	1.3 90/10/14 21:57:27, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _iowait.s
-;	_iowait( int fd );
-;
-	.file	"_iowait.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__iowait
-
-__iowait:
-	const tav,HIF_iowait @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_isatty.s b/newlib/libc/sys/a29khif/_isatty.s
deleted file mode 100644
index 55110e2fc..000000000
--- a/newlib/libc/sys/a29khif/_isatty.s
+++ /dev/null
@@ -1,22 +0,0 @@
-	.file "isatty.c"
-	.sect .lit,lit
-gcc2_compiled.:
-	.text
-	.align 4
-	.global __isatty
-	.global _isatty
-	.word 0x30000
-__isatty:
-_isatty:
-	sub gr1,gr1,16
-	asgeu V_SPILL,gr1,gr126
-	add lr1,gr1,28
-	const gr116,__iostat
-	consth gr116,__iostat
-	calli lr0,gr116
-	sll lr2,lr6,0
-	sll gr96,gr96,30
-	add gr1,gr1,16
-	srl gr96,gr96,31
-	jmpi lr0
-	asleu V_FILL,lr1,gr127
diff --git a/newlib/libc/sys/a29khif/_lseek.s b/newlib/libc/sys/a29khif/_lseek.s
deleted file mode 100644
index 56a7fc6c9..000000000
--- a/newlib/libc/sys/a29khif/_lseek.s
+++ /dev/null
@@ -1,42 +0,0 @@
-; @(#)_lseek.s	1.4 90/10/14 21:57:28, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _lseek.s
-;	int cc = _lseek( int fd, long offset, int whence );
-;
-	.file	"_lseek.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00050000		; Debugger tag word
-	.global	__lseek
-;; syscalls used now -- 	.global	_lseek
-
-
-__lseek:
-;; syscalls used now -- _lseek:
-	const tav,HIF_lseek @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_open.s b/newlib/libc/sys/a29khif/_open.s
deleted file mode 100644
index 3a9ed7e61..000000000
--- a/newlib/libc/sys/a29khif/_open.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_open.s	1.4 90/10/14 21:57:30, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _open.s
-;	int fd = _open( char *path, int oflag [, int mode ] );
-;
-	.file	"_open.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00050000		; Debugger tag word
-	.global	__open
-
-__open:
-	const tav,HIF_open @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_query.s b/newlib/libc/sys/a29khif/_query.s
deleted file mode 100644
index 6887bea93..000000000
--- a/newlib/libc/sys/a29khif/_query.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_query.s	2.2 90/10/14 21:57:31, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _query.s
-;	_query( query_code );
-;
-	.file	"_query.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__query
-
-__query:
-	const tav,HIF_query @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_read.s b/newlib/libc/sys/a29khif/_read.s
deleted file mode 100644
index 23ebbe732..000000000
--- a/newlib/libc/sys/a29khif/_read.s
+++ /dev/null
@@ -1,38 +0,0 @@
-; @(#)_read.s	1.4 90/10/14 21:57:32, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _read.s
-;	int nread = _read( int fd, char *buf, int count );
-;
-	.file	"_read.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00050000		; Debugger tag word
-	.global	__read
-
-__read:
-	const tav,HIF_read @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.end
diff --git a/newlib/libc/sys/a29khif/_sbrk.s b/newlib/libc/sys/a29khif/_sbrk.s
deleted file mode 100644
index 33c1269cd..000000000
--- a/newlib/libc/sys/a29khif/_sbrk.s
+++ /dev/null
@@ -1,30 +0,0 @@
-	.file "sbrk.c"
-	.sect .lit,lit
-gcc2_compiled.:
-	.text
-	.align 4
-	.global __sbrk
-	.word 0x30000
-__sbrk:
-	sub gr1,gr1,16
-	asgeu V_SPILL,gr1,gr126
-	add lr1,gr1,28
-	sll lr2,lr6,0
-	jmpt lr2,L4
-	constn gr96,65535
-	const gr116,__sysalloc
-	consth gr116,__sysalloc
-	calli lr0,gr116
-	nop
-	sll gr117,gr96,0
-	cpneq gr116,gr117,0
-	jmpf gr116,L4
-	constn gr96,65535
-	sll gr96,gr117,0
-L4:
-	add gr1,gr1,16
-	nop
-	jmpi lr0
-	asleu V_FILL,lr1,gr127
-
-
diff --git a/newlib/libc/sys/a29khif/_setim.s b/newlib/libc/sys/a29khif/_setim.s
deleted file mode 100644
index 0cf86aeda..000000000
--- a/newlib/libc/sys/a29khif/_setim.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_setim.s	2.2 90/10/14 21:57:33, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _setim.s
-;	_setim( im, di );
-;
-	.file	"_setim.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00040000		; Debugger tag word
-	.global	__setim
-
-__setim:
-	const tav,HIF_setim @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_settrap.s b/newlib/libc/sys/a29khif/_settrap.s
deleted file mode 100644
index 259097288..000000000
--- a/newlib/libc/sys/a29khif/_settrap.s
+++ /dev/null
@@ -1,39 +0,0 @@
-; @(#)_settrap.s	2.2 90/10/14 21:57:34, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _settrap.s
-;	void *prevaddr = _settrap( int trapno, void *trapaddr );
-;
-	.file	"_settrap.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00040000		; Debugger tag word
-	.global	__settrap
-
-__settrap:
-	const tav,HIF_settrap @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_setvec.s b/newlib/libc/sys/a29khif/_setvec.s
deleted file mode 100644
index 09d4076f5..000000000
--- a/newlib/libc/sys/a29khif/_setvec.s
+++ /dev/null
@@ -1,38 +0,0 @@
-; @(#)_setvec.s	1.2 90/10/14 21:57:35, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _setvec.s
-;	int success = _setvec( int trap_no, void (*handler)( void ) );
-;
-	.file	"_setvec.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00040000		; Debugger tag word
-	.global	__setvec
-
-__setvec:
-	const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.end
diff --git a/newlib/libc/sys/a29khif/_tmpnam.s b/newlib/libc/sys/a29khif/_tmpnam.s
deleted file mode 100644
index c7795e27a..000000000
--- a/newlib/libc/sys/a29khif/_tmpnam.s
+++ /dev/null
@@ -1,41 +0,0 @@
-; @(#)_tmpnam.s	1.2 90/10/14 21:57:36, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _tmpnam.s
-;	char *cp = _khif_tmpnam( char *bufr );
-;		/* same as ANSI tmpnam(), but NULL arg is not allowed */
-;	NOTE - Will not work on BSD (no tmpnam sys call)
-;
-	.file	"_tmpnam.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__khif_tmpnam
-
-__khif_tmpnam:
-	const tav,HIF_tmpnam @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/_write.s b/newlib/libc/sys/a29khif/_write.s
deleted file mode 100644
index 21c0e5815..000000000
--- a/newlib/libc/sys/a29khif/_write.s
+++ /dev/null
@@ -1,40 +0,0 @@
-; @(#)_write.s	1.4 90/10/14 21:57:37, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _write.s
-;	int written = _write( int fd, char *buf, int count );
-;
-	.file	"_write.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00050000		; Debugger tag word
-	.global	__write
-;; syscalls used now -- 	.global	_write
-
-__write:
-;; syscalls used now -- _write:
-	const tav,HIF_write @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.end
diff --git a/newlib/libc/sys/a29khif/aclocal.m4 b/newlib/libc/sys/a29khif/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/a29khif/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/a29khif/alloc.s b/newlib/libc/sys/a29khif/alloc.s
deleted file mode 100644
index cd90022a5..000000000
--- a/newlib/libc/sys/a29khif/alloc.s
+++ /dev/null
@@ -1,64 +0,0 @@
-; 
-;(#)_alloc.s	1.4 90/10/14 21:57:19, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-;	07/06/89 (JS) Replaced call to const tav,HIF_macro 
-;		 and deleted call to reterr macro as a NULL needs to be
-;		 returned on failure.
-; _alloc.s
-;	void *vp = _sysalloc( int size );
-;
-	.file	"_alloc.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	__sysalloc
-__sysalloc:
-	  const tav,HIF_alloc 
- asneq V_SYSCALL,gr1,gr1
-	  jmpti         tav, lr0
-	  const        tpc, _errno
-	  consth       tpc, _errno
-	  store        0, 0, tav, tpc
-	  jmpi         lr0
-	  const		v0, 0			; return NULL on error.
-
-;
-;	int errret = _sysfree( void *addr, int size );
-;
-	.global	__sysfree
-__sysfree:
-	const tav,HIF_free 
- asneq V_SYSCALL,gr1,gr1 
- jmpti tav,lr0 
- const tpc,_errno 
- consth tpc,_errno 
- store 0,0,tav,tpc 
- jmpi lr0 
- constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/clock.s b/newlib/libc/sys/a29khif/clock.s
deleted file mode 100644
index 5cb26dff0..000000000
--- a/newlib/libc/sys/a29khif/clock.s
+++ /dev/null
@@ -1,41 +0,0 @@
-; @(#)clock.s	1.3 90/10/14 21:57:43, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; clock.s
-;	long ticks = clock( );
-;
-	.file	"clock.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00020000		; Debugger tag word
-	.global	_clock
-	.global	__clock
-
-_clock:
-__clock:
-	const tav,HIF_clock @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/configure b/newlib/libc/sys/a29khif/configure
deleted file mode 100755
index 4bebb8273..000000000
--- a/newlib/libc/sys/a29khif/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=_alloc.s
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/a29khif/configure.in b/newlib/libc/sys/a29khif/configure.in
deleted file mode 100644
index de247d3d3..000000000
--- a/newlib/libc/sys/a29khif/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/a29khif configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(_alloc.s)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/a29khif/crt0.s b/newlib/libc/sys/a29khif/crt0.s
deleted file mode 100644
index 8ae79f898..000000000
--- a/newlib/libc/sys/a29khif/crt0.s
+++ /dev/null
@@ -1,226 +0,0 @@
-; @(#)crt0.s	2.7 90/10/15 13:17:57, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc	(AMD)  which
-; specifically	grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in	the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-	.file	"crt0.s"
-; crt0.s version 2.1-7
-;
-; This module gets control from the OS.
-; It saves away the Am29027 Mode register settings and
-; then sets up the pointers to the resident spill and fill
-; trap handlers. It then establishes argv and argc for passing
-; to main. It then calls _main. If main returns, it calls _exit.
-;
-;	void = start( );
-;	NOTE - not C callable (no lead underscore)
-;
-	.include	"sys/sysmac.h"
-;
-;
-	.extern V_SPILL, V_FILL
-	.comm	__29027Mode, 8	; A shadow of the mode register
-	.comm	__LibInit, 4
-	.comm	__environ, 4	; Environment variables, currently none.
-	.text
-	.extern _main, _exit
-	.extern _memset
-
-	.word	0			; Terminating tag word
-	.global start
-start:
-	sub	gr1, gr1, 6 * 4
-	asgeu	V_SPILL, gr1, rab	; better not ever happen
-	add	lr1, gr1, 6 * 4
-;
-; Initialize the .bss section to zero by using the memset library function.
-; The .bss initialization section below has been commented out as it breaks
-; XRAY29K that has been released. The operators sizeof and startof create
-; new sections that are not recognized by XRAY29k, but will be implemented
-; in the next release (2.0).
-;
-;	const	lr4, $sizeof(.bss)	; get size of .bss section to zero out
-;	consth	lr4, $sizeof(.bss)
-;	const	lr2, $startof(.bss)	; Get start address of .bss section
-;	consth	lr2, $startof(.bss)
-;	const	lr0, _memset		; address of memset function
-;	consth	lr0, _memset
-;	calli	lr0, lr0		; call memset function
-;	const	lr3, 0
-
-; Save the initial value of the Am29027's Mode register
-; If your const tav,HIF_does @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 not enter crt0 with value for Am29027's Mode register
-; in gr96 and gr97, and also if the coprocessor is active uncomment the
-; next 4 lines.
-;	const	gr96, 0xfc00820
-;	consth	gr96, 0xfc00820
-;	const	gr97, 0x1375
-;	store	1, 3, gr96, gr97
-;
-	const	gr98, __29027Mode
-	consth	gr98, __29027Mode
-	store	0, 0, gr96, gr98
-	add	gr98, gr98, 4
-	store	0, 0, gr97, gr98
-;
-; Now call the const tav,HIF_to @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 setup the spill and fill trap handlers
-;
-	const	lr3, spill
-	consth	lr3, spill
-	const	lr2, V_SPILL
-	const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1
-	const	lr3, fill
-	consth	lr3, fill
-	const	lr2, V_FILL
-	const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1
-;
-; Set up dividu handler, since native one don't work?!
-; Set it up by hand (FIXME) since HIF_settrap doesn't work either!
-;
-;	const	lr3,Edividu
-;	consth	lr3,Edividu
-;
-;	const	lr2,35
-;	const tav,HIF_settrap @ asneq V_SYSCALL,gr1,gr1
-;	asge	0x50,gr121,0	; check whether it failed
-;	const	lr2,0x8000008c	; abs addr of dividu trap handler on EB
-;	consth	lr2,0x8000008c
-;	store	0,0,lr3,lr2	; Clobber vector FIXME
-
-;
-;	Get the argv base address and calculate argc.
-;
-	const tav,HIF_getargs @ asneq V_SYSCALL,gr1,gr1
-	add	lr3, v0, 0		; argv
-	add	lr4, v0, 0
-	constn	lr2, -1
-argcloop:				; scan for NULL terminator
-	load	0, 0, gr97, lr4
-	add	lr4, lr4, 4
-	cpeq	gr97, gr97, 0
-	jmpf	gr97, argcloop
-	add	lr2, lr2, 1
-;
-; Now call LibInit, if there is one. To aid runtime libraries
-; that need to do some startup initialization, we have created
-; a bss variable called LibInit. If the library doesn't need
-; any run-time initialization, the variable is still 0. If the
-; library does need run-time initialization, the library will
-; contain a definition like
-; void (*_LibInit)(void) = LibInitFunction;
-; The linker will match up our bss LibInit with this data LibInit
-; and the variable will not be 0.
-;
-	const	lr0, __LibInit
-	consth	lr0, __LibInit
-	load	0, 0, lr0, lr0
-	cpeq	gr96, lr0, 0
-	jmpt	gr96, NoLibInit
-	nop
-	calli	lr0, lr0
-	nop
-NoLibInit:
-;
-; call main, passing it 2 arguments. main( argc, argv )
-;
-	const	lr0, _main
-	consth	lr0, _main
-	calli	lr0, lr0
-	nop
-;
-; call exit
-;
-	const	lr0, _exit
-	consth	lr0, _exit
-	calli	lr0, lr0
-	add	lr2, gr96, 0
-;
-; Should never get here, but just in case
-;
-loop:
-	const tav,HIF_exit @ asneq V_SYSCALL,gr1,gr1
-	jmp	loop
-	nop
-	.sbttl	"Spill and Fill trap handlers"
-	.eject
-;
-;	SPILL, FILL trap handlers
-;
-; Note that these Spill and Fill trap handlers allow the OS to
-; assume that the only registers of use are between gr1 and rfb.
-; Therefore, if the OS desires to, it may simply preserve from
-; lr0 for (rfb-gr1)/4 registers when doing a context save.
-;
-;
-; Here is the spill handler
-;
-; spill registers from [*gr1..*rab)
-; and move rab downto where gr1 points
-;
-; rab must change before rfb for signals to work
-;
-; On entry:	rfb - rab = windowsize, gr1 < rab
-; Near the end: rfb - rab > windowsize, gr1 == rab
-; On exit:	rfb - rab = windowsize, gr1 == rab
-;
-	.global spill
-spill:
-	sub	tav, rab, gr1	; tav = number of bytes to spill
-	srl	tav, tav, 2	; change byte count to word count
-	sub	tav, tav, 1	; make count zero based
-	mtsr	cr, tav		; set Count Remaining register
-	sub	tav, rab, gr1
-	sub	tav, rfb, tav	; pull down free bound and save it in rab
-	add	rab, gr1, 0	; first pull down allocate bound
-	storem	0, 0, lr0, tav	; store lr0..lr(tav) into rfb
-	jmpi	tpc		; return...
-	  add	rfb, tav, 0
-;
-; Here is the fill handler
-;
-; fill registers from [*rfb..*lr1)
-; and move rfb upto where lr1 points.
-;
-; rab must change before rfb for signals to work
-;
-; On entry:	rfb - rab = windowsize, lr1 > rfb
-; Near the end: rfb - rab < windowsize, lr1 == rab + windowsize
-; On exit:	rfb - rab = windowsize, lr1 == rfb
-;
-	.global fill
-fill:
-	const	tav, 0x80 << 2
-	or	tav, tav, rfb	; tav = ((rfb>>2) | 0x80)<<2 == [rfb]<<2
-	mtsr	ipa, tav	; ipa = [rfb]<<2 == 1st reg to fill
-				; gr0 is now the first reg to spill
-	sub	tav, lr1, rfb	; tav = number of bytes to spill
-	add	rab, rab, tav	; push up allocate bound
-	srl	tav, tav, 2	; change byte count to word count
-	sub	tav, tav, 1	; make count zero based
-	mtsr	cr, tav		; set Count Remaining register
-	loadm	0, 0, gr0, rfb	; load registers
-	jmpi	tpc		; return...
-	  add	rfb, lr1, 0	; ... first pushing up free bound
-
-	.end
diff --git a/newlib/libc/sys/a29khif/getargs.s b/newlib/libc/sys/a29khif/getargs.s
deleted file mode 100644
index aa1f9c442..000000000
--- a/newlib/libc/sys/a29khif/getargs.s
+++ /dev/null
@@ -1,38 +0,0 @@
-; @(#)getargs.s	1.2 90/10/14 21:57:44, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _getargs.s
-;	void _getargs( void );
-;
-	.file	"_getargs.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00020000		; Debugger tag word
-	.global	__getargs
-
-__getargs:
-	const tav,HIF_getargs @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.end
diff --git a/newlib/libc/sys/a29khif/getenv.s b/newlib/libc/sys/a29khif/getenv.s
deleted file mode 100644
index 4351849a0..000000000
--- a/newlib/libc/sys/a29khif/getenv.s
+++ /dev/null
@@ -1,48 +0,0 @@
-; @(#)getenv.s	1.4 90/10/14 21:57:45, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; getenv.s
-;	char *value = getenv( const char *name );
-;
-	.file	"getenv.s"
-
-	.include "sys/sysmac.h"
-
-	.text
-	.word	0x00030000	; Debugger tag word
-	.global	_getenv
-	.global	__getenv
-_getenv:
-__getenv:
-	const tav,HIF_getenv @ asneq V_SYSCALL,gr1,gr1		; HIF service trap
-	jmpti	tav, lr0	; If tav is true, were finished, return.
-	const	tpc, _errno
-	consth	tpc, _errno	; Otherwise,
-	store	0, 0, tav, tpc	;   store error code in _errno,
-	jmpi	lr0		;   then return
-	const	v0, 0		;   with a value of 0 (NULL pointer).
-
-	.end
diff --git a/newlib/libc/sys/a29khif/getpid.c b/newlib/libc/sys/a29khif/getpid.c
deleted file mode 100644
index 99d88bd39..000000000
--- a/newlib/libc/sys/a29khif/getpid.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/* Stub for getpid.  */
-
-#include <_ansi.h>
-
-/* This should really return pid_t, but that doesn't seem to be in
-   <sys/types.h>.  */
-
-int
-_DEFUN_VOID (_getpid)
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/a29khif/kill.c b/newlib/libc/sys/a29khif/kill.c
deleted file mode 100644
index ff9fe5428..000000000
--- a/newlib/libc/sys/a29khif/kill.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Stub for kill.  */
-
-#include <_ansi.h>
-#include <errno.h>
-
-/* The pid argument should be of type pid_t.  */
-
-int
-_DEFUN (_kill, (pid, sig),
-	int pid _AND
-	int sig)
-{
-  if (pid == 1 || pid < 0)
-    {
-      if (sig == 0)
-	return 0;
-      return raise (sig);
-    }
-  errno = EINVAL;
-  return -1;
-}
diff --git a/newlib/libc/sys/a29khif/read.s b/newlib/libc/sys/a29khif/read.s
deleted file mode 100644
index 1a5daf301..000000000
--- a/newlib/libc/sys/a29khif/read.s
+++ /dev/null
@@ -1,54 +0,0 @@
-; @(#)_read.s	1.4 90/10/14 21:57:32, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _read.s
-;	int nread = _read( int fd, char *buf, int count );
-;
-	.file	"_read.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00050000		; Debugger tag word
-	.global	__read
-;; syscalls used now -- 	.global	_read
-
-__read:
-;; syscalls used now -- _read:
-	.ifdef	_BSD_OS
-;		BSD version - uses readv const tav,HIF_call @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	sub	msp, msp, 8
-	store	0, 0, lr3, msp
-	add	tav, msp, 4
-	add	lr3, msp, 0
-	store	0, 0, lr4, tav
-	const	lr4, 1
-	const tav,HIF_readv @ asneq V_SYSCALL,gr1,gr1
-	jmpti	tav, lr0
-	add	msp, msp, 8
-	const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.else
-	const tav,HIF_read @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-	.endif
-	.end
diff --git a/newlib/libc/sys/a29khif/remove.s b/newlib/libc/sys/a29khif/remove.s
deleted file mode 100644
index 948be04c2..000000000
--- a/newlib/libc/sys/a29khif/remove.s
+++ /dev/null
@@ -1,43 +0,0 @@
-; @(#)remove.s	1.3 90/10/14 21:57:53, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; remove.s
-;	int cc = remove( char *path );
-;
-	.file	"remove.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	_remove
-	.global	__remove
-	.global	__unlink
-
-_remove:
-__remove:
-__unlink:
-	const tav,HIF_remove @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/rename.s b/newlib/libc/sys/a29khif/rename.s
deleted file mode 100644
index 31da614e3..000000000
--- a/newlib/libc/sys/a29khif/rename.s
+++ /dev/null
@@ -1,41 +0,0 @@
-; @(#)rename.s	1.3 90/10/14 21:57:54, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; rename.s
-;	int cc = rename( char *from, char *to );
-;
-	.file	"rename.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00040000		; Debugger tag word
-	.global	_rename
-	.global	__rename
-
-_rename:
-__rename:
-	const tav,HIF_rename @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1
-
-	.end
diff --git a/newlib/libc/sys/a29khif/signal.s b/newlib/libc/sys/a29khif/signal.s
deleted file mode 100644
index 29273a0d3..000000000
--- a/newlib/libc/sys/a29khif/signal.s
+++ /dev/null
@@ -1,452 +0,0 @@
-;@(#)signal.s	2.15 90/10/14 21:57:55, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-	.file	"signal.s"
-
-; SigEntry is the address of an array of C-level user code signal handlers.
-; They must return to the top-level before doing a sigret() return function.
-; Nested signals are supported.
-
-	.extern	V_SPILL, V_FILL
-	.extern fill		; In crt0.s
-
-	.align	4
-	.comm	WindowSize, 4
-	.data
-SigEntry:
-	.word	0		; reserved
-	.word	0		; adds. of #2 SIGINT handler
-	.word	0		; reserved
-	.word	0		; reserved
-	.word	0		; reserved
-	.word	0		; reserved
-	.word	0		; reserved
-	.word	0		; adds. of #8 SIGFPE handler
-
-	.text
-
-	.reg	v0,	gr96
-	.reg	v1,	gr97
-	.reg	v2,	gr98
-	.reg	v3,	gr99
-
-	.reg	tav,	gr121
-	.reg	tpc,	gr122
-	.reg	lrp,	gr123
-	.reg	slp,	gr124
-	.reg	msp,	gr125
-	.reg	rab,	gr126
-	.reg	rfb,	gr127
-
-;=================================================================== setjmp()
-; int
-; setjmp(label_t jmpbuf)
-; {
-;	*jmpbuf = {gr1, msp, lr0, lr1};
-;	return 0;
-; }
-;
-	.global	_setjmp
-_setjmp:
-	store	0, 0, gr1, lr2
-	add	lr2, lr2, 4
-	store	0, 0, msp, lr2
-	add	lr2, lr2, 4
-	store	0, 0, lr0, lr2
-	add	lr2, lr2, 4
-	store	0, 0, lr1, lr2
-	jmpi	lr0
-	 const	v0, 0
-;
-;==================================================================== longjmp()
-; int
-; longjmp(label_t jmpbuf, int value)
-; {
-;	/* BUG: check for this
-;	  if (msp > jmpbuf->msp || gr1 > jmpbuf->gr1)
-;		longjmperror();
-;	 */
-;
-;	gr1 = jmpbuf->gr1;
-;	lr2addr = jmpbuf->gr1 + 8;
-;	msp = jmpbuf->msp;
-;
-;	/* saved lr1 is invalid if saved lr2addr > rfb */
-;	if (lr2addr > rfb) {
-;		/*
-;		 * None of the registers are useful.
-;		 * Set rfb to lr2addr - 512 & rab to rfb - 512.
-;		 * the FILL assert will take care of filling
-;		 */
-;		lr1 = jmpbuf->lr1;
-;		rab = lr2addr - windowsize;
-;		rfb = lr2addr;
-;	}
-;
-;	lr0 = jmpbuf->lr0;
-;	if (rfb < lr1)
-;		raise V_FILL;
-;	return value;
-; }
-;
-	.global	_longjmp
-_longjmp:
-	load	0, 0, tav, lr2		; copy in gr1
-	add	v1, lr2, 4		; v1 points to msp
-	; make sure we return a non-zero value
-	cpeq	v0, lr3, 0
-	srl	v0, v0, 31
-	or	v0, lr3, v0
-
-	add	gr1, tav, 0		; now update gr1
-	add	tav, tav, 8		; calculate lr2addr
-	load	0, 0, msp, v1		; update msp from jmpbuf
-	cpleu	v3, tav, rfb		; if (lr2addr > rfb)
-	jmpt	v3, $1			; {
-	 add	v1, v1, 4		; v1 points to lr0
-	add	v2, v1, 4		;	v2 points to lr1
-	load	0, 0, lr1, v2		;	lr1 = value from jmpbuf
-	sub	v3, rfb, rab		;
-	sub	rab, tav, v3		;	rab = lr2addr - windowsize
-	add	rfb, tav, 0		;	rfb = lr2addr
-$1:	; }
-	load	0, 0, lr0, v1
-	jmpi	lr0
-	 asgeu	 V_FILL, rfb, lr1	; may fill from rfb to lr1
-;
-;================================================================== sigcode
-; About to deliver a signal to a user mode signal handler.
-;	msp+(15*4) = signal_number
-;	msp+(14*4) = gr1
-;	msp+(13*4) = rab
-;	msp+(12*4) = PC0
-;	msp+(11*4) = PC1
-;	msp+(10*4) = PC2
-;	msp+( 9*4) = CHA
-;	msp+( 8*4) = CHD
-;	msp+( 7*4) = CHC
-;	msp+( 6*4) = ALU
-;	msp+( 5*4) = OPS
-;	msp+( 4*4) = gr121
-;	msp+( 3*4) = gr99
-;	msp+( 2*4) = gr98
-;	msp+( 1*4) = gr97
-;	msp        = gr96
-; The state of all the registers (except for msp, chc and rab)
-; is the same as when the process was interrupted.
-;
-; We must make the stack and window consistent before calling the handler
-; The orignal rab value is on the stack. The interrupt handler placed
-; rfb-Windowsize in rab. This is required to support nested interrupts.
-;
-; Note that the window becomes incosistent only during certain
-; critical sections in spill, fill, longjmp and sigcode.
-;	rfb - rab > windowsize => we are in spill
-;	rfb - rab < windowsize => we are in fill
-;	gr1 + 8   > rfb        => we are in long-longjmp case
-; In case of spill, fill and lonjmp; rab is modified first,
-; so if we are in one of these critical sections,
-; we set rab to rfb - WINDOWSIZE.
-;
-	.equ	SIGCTX_SIZE,		(16)*4
-	.equ	SIGCTX_SIGNUMB,		(15)*4
-	.equ	SIGCTX_GR1_OFFSET,	(14)*4
-	.equ	SIGCTX_RAB_OFFSET,	(13)*4
-	.equ	SIGCTX_PC0_OFFSET,	(12)*4
-	.equ	SIGCTX_PC1_OFFSET,	(11)*4
-	.equ	SIGCTX_PC2_OFFSET,	(10)*4
-	.equ	SIGCTX_CHC_OFFSET,	(7)*4
-	.equ	SIGCTX_OPS_OFFSET,	(5)*4
-	.equ	SIGCTX_TAV_OFFSET,	(4)*4
-	.global	sigcode
-sigcode:
-; --------------------------------------------------------  R-Stack fixup
-	const	v0, WindowSize		; get register cache size
-	consth	v0, WindowSize
-	load	0, 0, v0, v0
-	add	v2, msp, SIGCTX_RAB_OFFSET
-	load	0, 0, v2, v2		; get interrupted rab value
-	sub	v1, rfb, v2		; determine if  rfb-rab <= WINDOW_SIZE
-	cpgeu	v1, v1, v0		;
-	jmpt	v1, nfill		; jmp if spill or 'normal' interrupt
-	add	v1, gr1, 8
-	 cpgt	v1, v1, rfb		; interrupted longjmp can look like fill
-	jmpf	v1, nfill		; test for long-longjmp interruption
-	 nop				; jmp if gr1+8 <= rfb
-; Fixup signal stack to re-start interrupted fill
-; backup pc1 -- this is needed for the partial fill case.
-; Clear chc so an interrupted load/store does not restart.
-; Reset rab to a window distance below rfb, rab shall be
-; decremented again on re-starting the interrupted fill.
-; The interrupt handler set rab=rfb-WindowSize.
-;
-	add	v0, msp, SIGCTX_RAB_OFFSET
-	store	0, 0, rab, v0		; re-store (rfb-WindowSize) for rab
-	const	v2, fill
-	consth	v2, fill
-	add	v0, msp, SIGCTX_PC1_OFFSET
-	store	0, 0, v2, v0
-	sub	v2, v2, 4		; determine pc0
-	add	v0, msp, SIGCTX_PC0_OFFSET
-	store	0, 0, v2, v0
-	const	v2, 0			; clear chc
-	add	v0, msp, SIGCTX_CHC_OFFSET
-	store	0, 0, v2, v0
-
-nfill:
-	cpgt	v0, gr1, rfb		; if gr1 > rfb then gr1 = rfb
-	jmpt	v0, lower
-	 cplt	v0, gr1, rab		; if gr1 < rab then gr1 = rab
-	jmpt	v0, raise
-	 nop
-; -------------------------------------------------------- save_regs
-sig1:	sub	msp, msp, (4+2+25)*4	; reserve space for regs
-	mfsr	gr96, ipc
-	mfsr	gr97, ipa
-	mfsr	gr98, ipb
-	mfsr	gr99, q
-	mtsrim	cr, 4-1
-	storem  0, 0, gr96, msp
-;					 "push" registers stack support
-	add	gr96, lr1, 0
-	add	gr97, rfb, 0
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	storem  0, 0, gr96, gr99
-;					  "push" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	storem  0, 0, gr100, gr96
-;
-; -------------------------------------------------------- Dummy Call
-	.equ	RALLOC, 4*4		; make space for function calls
-	add	v0, rfb, 0		; store original rfb
-	sub	gr1, gr1, RALLOC
-	asgeu	V_SPILL, gr1, rab
-	add	lr1, v0, 0		; set lr1 = original rfb
-	add	v1, msp, (4+2+25)*4 + SIGCTX_SIGNUMB
-	load	0, 0, lr2, v1		; restore signal number
-	sub	v1, lr2, 1		; get handler index
-	sll	v1, v1, 2		; point to addresses
-;
-; -------------------------------------------------------- call C-level
-; Handler must not use HIF services other than the _sigret() type.
-	const	v0, SigEntry
-	consth	v0, SigEntry
-	add	v0, v0, v1
-	load	0, 0, v0, v0		; determine if handler registered
-	cpeq	v1, v0, 0
-	jmpt	v1, NoHandler
-	 nop
-	calli	lr0, v0			; call C-level signal handler
-	 nop
-;
-; -------------------------------------------------------- default return
-NoHandler:
-	jmp	__sigdfl
-	 nop
-
-; -------------------------------------------------------- support bits
-lower:	sll	gr1, rfb, 0
-	jmp	sig1
-	 nop
-raise:	sll	gr1, rab, 0
-	jmp	sig1
-	 nop
-/*
-; -------------------------------------------------------- repair_regs
-	mtsrim	cr, 4-1
-	loadm	0, 0, gr96, msp
-	mtsr	ipc, gr96
-	mtsr	ipa, gr97
-	mtsr	ipb, gr98
-	mtsr	Q, gr99
-;					 "pop" registers stack support
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	loadm	0, 0, gr96, gr99
-	add	lr1, gr96, 0
-	add	rfb, gr97, 0
-;					  "pop" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	loadm	0, 0, gr100, gr96
-	add	msp, msp, (4+2+25)*4	; repair msp to save_regs entry value
-; -------------------------------------------------------- end repair
-*/
-
-; ======================================================== _sigret()
-	.global	__sigret
-__sigret:
-;	repair_regs
-; -------------------------------------------------------- repair_regs
-	mtsrim	cr, 4-1
-	loadm	0, 0, gr96, msp
-	mtsr	ipc, gr96
-	mtsr	ipa, gr97
-	mtsr	ipb, gr98
-	mtsr	q, gr99
-;					 "pop" registers stack support
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	loadm	0, 0, gr96, gr99
-	add	lr1, gr96, 0
-	add	rfb, gr97, 0
-;					  "pop" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	loadm	0, 0, gr100, gr96
-	add	msp, msp, (4+2+25)*4	; repair msp to save_regs entry value
-; -------------------------------------------------------- end repair
-	const	tav, 323		; HIF _sigret
-	asneq	69, gr1,gr1
-	halt				; commit suicide if returns
-
-; ======================================================== _sigdfl()
-	.global	__sigdfl
-__sigdfl:
-;	repair_regs
-; -------------------------------------------------------- repair_regs
-	mtsrim	cr, 4-1
-	loadm	0, 0, gr96, msp
-	mtsr	ipc, gr96
-	mtsr	ipa, gr97
-	mtsr	ipb, gr98
-	mtsr	q, gr99
-;					 "pop" registers stack support
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	loadm	0, 0, gr96, gr99
-	add	lr1, gr96, 0
-	add	rfb, gr97, 0
-;					  "pop" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	loadm	0, 0, gr100, gr96
-	add	msp, msp, (4+2+25)*4	; repair msp to save_regs entry value
-; -------------------------------------------------------- end repair
-	const	tav, 322		; HIF _sigdfl
-	asneq	69, gr1,gr1
-	halt				; commit suicide if returns
-
-; ======================================================== _sigrep()
-__sigrep:
-	.global	__sigrep
-;	repair_regs
-; -------------------------------------------------------- repair_regs
-	mtsrim	cr, 4-1
-	loadm	0, 0, gr96, msp
-	mtsr	ipc, gr96
-	mtsr	ipa, gr97
-	mtsr	ipb, gr98
-	mtsr	q, gr99
-;					 "pop" registers stack support
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	loadm	0, 0, gr96, gr99
-	add	lr1, gr96, 0
-	add	rfb, gr97, 0
-;					  "pop" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	loadm	0, 0, gr100, gr96
-	add	msp, msp, (4+2+25)*4	; repair msp to save_regs entry value
-; -------------------------------------------------------- end repair
-	const	tav, 324		; HIF _sigrep
-	asneq	69, gr1,gr1
-	halt				; commit suicide if returns
-
-; ======================================================== _sigskp()
-	.global	__sigskp
-__sigskp:
-;	repair_regs
-; -------------------------------------------------------- repair_regs
-	mtsrim	cr, 4-1
-	loadm	0, 0, gr96, msp
-	mtsr	ipc, gr96
-	mtsr	ipa, gr97
-	mtsr	ipb, gr98
-	mtsr	q, gr99
-;					 "pop" registers stack support
-	mtsrim	cr, 2-1
-	add	gr99, msp, 2*4
-	loadm	0, 0, gr96, gr99
-	add	lr1, gr96, 0
-	add	rfb, gr97, 0
-;					  "pop" remaining global registers
-	mtsrim	cr, 25-1		; gr100-gr124
-	add	gr96, msp, (4+2)*4
-	loadm	0, 0, gr100, gr96
-	add	msp, msp, (4+2+25)*4	; repair msp to save_regs entry value
-; -------------------------------------------------------- end repair
-	const	tav, 325		; HIF _sigskp
-	asneq	69, gr1,gr1
-	halt				; commit suicide if returns
-
-; ======================================================== _sendsig()
-; lr2 = signal number
-	.global _raise
-	.global	__sendsig
-_raise:
-__sendsig:
-	const	tav, 326		; HIF sendsig
-	asneq	69, gr1,gr1
-	jmpi	lr0
-	 nop
-
-;
-; ======================================================== signal()
-;	lr2 = signal number
-;	lr3 = handler address
-	.global	_signal
-_signal:
-; the memory variable WindowSize must be initalised at the
-; start when rfb and rab are a window size apart.
-	const	v0, WindowSize		; get register cache size
-	consth	v0, WindowSize
-	load	0, 0, v1, v0
-	cpeq	v1, v1, 0
-	jmpf	v1, WindowSizeOK
-	 sub	v1, rfb, rab		; rfb-rab = WINDOW_SIZE
-	store	0, 0, v1, v0
-WindowSizeOK:
-	const	v1, SigEntry
-	consth	v1, SigEntry
-	sub	v3, lr2, 1		; get handler index
-	sll	v3, v3, 2		; pointer to addresses
-	add	v1, v1, v3
-	store	0,0, lr3, v1		; save new handler
-
-	const	lr2, sigcode
-	consth	lr2, sigcode
-	;Fall through to __signal
-; ======================================================== _signal()
-	.global	__signal
-__signal:
-	const	tav, 321		; HIF signal
-	asneq	69, gr1,gr1
-	jmpi	lr0
-	 nop
diff --git a/newlib/libc/sys/a29khif/stubs.s b/newlib/libc/sys/a29khif/stubs.s
deleted file mode 100644
index e0b29bc77..000000000
--- a/newlib/libc/sys/a29khif/stubs.s
+++ /dev/null
@@ -1,135 +0,0 @@
-;
-;
-; File of stubs so that unix applications can link into a HIF monitor
-;
-; sac@cygnus.com
-
-	.text
-
-	.global	_sysalloc
-_sysalloc:
-	const	gr121,__sysalloc
-	consth	gr121,__sysalloc
-	jmpi	gr121
-
-	.global	_sysfree
-_sysfree:
-	const	gr121,__sysfree
-	consth	gr121,__sysfree
-	jmpi	gr121
-
-
-	.global	_cycles
-_cycles:
-	const	gr121,__cycles
-	consth	gr121,__cycles
-	jmpi	gr121
-
-;	.global	_exit
-;_exit:
-;	const	gr121,__exit
-;	consth	gr121,__exit
-;	jmpi	gr121
-
-	.global	_getpsiz
-_getpsiz:
-	const	gr121,__getpsiz
-	consth	gr121,__getpsiz
-	jmpi	gr121
-
-	.global	_gettz
-_gettz:
-	const	gr121,__gettz
-	consth	gr121,__gettz
-	jmpi	gr121
-
-	.global	_ioctl
-_ioctl:
-	const	gr121,__ioctl
-	consth	gr121,__ioctl
-	jmpi	gr121
-
-
-	.global	_iowait
-_iowait:
-	const	gr121,__iowait
-	consth	gr121,__iowait
-	jmpi	gr121
-
-
-;; syscalls used now -- 	.global	_open
-;; syscalls used now -- _open:
-;; syscalls used now -- 	const	gr121,__open
-;; syscalls used now -- 	consth	gr121,__open
-;; syscalls used now -- 	jmpi	gr121
-
-	.global	_query
-_query:
-	const	gr121,__query
-	consth	gr121,__query
-	jmpi	gr121
-
-
-	.global	_setim
-_setim:
-	const	gr121,__setim
-	consth	gr121,__setim
-	jmpi	gr121
-
-	.global	_settrap
-_settrap:
-	const	gr121,__settrap
-	consth	gr121,__settrap
-	jmpi	gr121
-
-	.global	_setvec
-_setvec:
-	const	gr121,__setvec
-	consth	gr121,__setvec
-	jmpi	gr121
-
-	.global	_getargs
-_getargs:
-	const	gr121,__getargs
-	consth	gr121,__getargs
-	jmpi	gr121
-
-;; syscalls used now -- 	.global	_unlink
-;; syscalls used now -- _unlink:
-;; syscalls used now -- 	const	gr121,__unlink
-;; syscalls used now -- 	consth	gr121,__unlink
-;; syscalls used now -- 	jmpi	gr121
-
-	.global	_sigret
-_sigret:
-	const	gr121,__sigret
-	consth	gr121,__sigret
-	jmpi	gr121
-
-	.global	_sigdfl
-_sigdfl:
-	const	gr121,__sigdfl
-	consth	gr121,__sigdfl
-	jmpi	gr121
-
-	.global	_sigrep
-_sigrep:
-	const	gr121,__sigrep
-	consth	gr121,__sigrep
-	jmpi	gr121
-
-	.global	_sigskp
-_sigskp:
-	const	gr121,__sigskp
-	consth	gr121,__sigskp
-	jmpi	gr121
-
-	.global	_sendsig
-_sendsig:
-	const	gr121,__sendsig
-	consth	gr121,__sendsig
-	jmpi	gr121
-
-	; fill this jmpi delay slot
-	; the others are not done since they do not matter
-	constn  lr0,-1
diff --git a/newlib/libc/sys/a29khif/sys/cpudef.h b/newlib/libc/sys/a29khif/sys/cpudef.h
deleted file mode 100644
index 4ec6ed39c..000000000
--- a/newlib/libc/sys/a29khif/sys/cpudef.h
+++ /dev/null
@@ -1,270 +0,0 @@
-; @(#)cpudef.h	2.3 90/10/14 20:55:56, Copyright 1989, 1990 AMD
-;-----------------------------------------------------------------------
-; Useful equates
-;-----------------------------------------------------------------------
-;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-	; Processor status registers OPS (sr1) and CPS (sr2)
-	.equ	CA,0x8000	; Coprocessor active
-	.equ	IP,0x4000	; Interrupt pending
-	.equ	TE,0x2000	; Trace enable
-	.equ	TP,0x1000	; Trace pending
-	.equ	TU,0x0800	; Trap unaligned access
-	.equ	FZ,0x0400	; Freeze
-	.equ	LK,0x0200	; Lock
-	.equ	RE,0x0100	; ROM enable
-	.equ	WM,0x0080	; Wait mode
-	.equ	PD,0x0040	; No translation for Data
-	.equ	PI,0x0020	; No translation for Instr
-	.equ	SM,0x0010	; Supervisor mode
-	.equ	IM,0x000C	; Interrupt mask
-	.equ	IM1,0x0100	; enable INTR0-1
-	.equ	IM2,0x1000	; enable INTR0-2
-	.equ	IM3,0x1100	; enable INTR0-3
-	.equ	DI,0x0002	; Disable ints
-	.equ	DA,0x0001	; Disable ints and traps
-
-	; Configuration register CFG (sr3)
-	.equ	PRL,0xFF000000	; Processor release level
-	.equ	VF,0x10		; Vector fetch
-	.equ	RV,0x08		; ROM Vector area
-	.equ	BO,0x04		; Byte order
-	.equ	CP,0x02		; Coprocessor present
-	.equ	CD,0x01		; BTC disable
-
-	; Channel control register CHC (sr6)
-	.equ	LS,0x8000	; Load store
-	.equ	ML,0x4000	; Multiple operation
-	.equ	ST,0x2000	; Set
-	.equ	LA,0x1000	; Lock active
-	.equ	TF,0x0400	; Transaction faulted
-	.equ	TR,0x03FC	; Target register
-	.equ	NN,0x0002	; Not needed
-	.equ	CV,0x0001	; Contents valid
-
-	; Timer reload register TMR (sr9)
-	.equ	IE,0x01000000	; timer int enable
-	.equ	IN,0x02000000	; timer int pending
-	.equ	OV,0x04000000	; timer Overflow
-
-	; MMU configuration register MMU (sr13)
-	.equ	PS,0x300	; Page size
-	.equ	PID,0xFF	; Process identifier
-
-	; ALU status register ALU (sr132)
-	.equ	DF,0x800	; Divide flag
-	.equ	V,0x400		; Overflow
-	.equ	N,0x200		; Negative
-	.equ	Z,0x100		; Zero
-	.equ	C,0x080		; Carry
-
-	; TLB entry
-	.equ	VTAG,0xFFFF8000	; Virtual tag
-	.equ	VE,0x4000	; Valid entry
-	.equ	SR,0x2000	; Supervisor read
-	.equ	SW,0x1000	; Supervisor write
-	.equ	SE,0x0800	; Supervisor execute
-	.equ	UR,0x0400	; User read
-	.equ	UW,0x0200	; User write
-	.equ	UE,0x0100	; User execute
-	.equ	TID,0x00FF	; Task identifier
-	.equ	RPN,0xFFFFFC00	; Real page number
-	.equ	PGM,0x00C0	; User programmable
-	.equ	U,0x0002	; Usage
-	.equ	F,0x0001	; Flag
-
-;-----------------------------------------------------------------------
-;Global registers
-;-----------------------------------------------------------------------
-
-	.reg	rsp, gr1	; local register stack pointer
-
-	; System-wide statics
-	.reg	s0, gr64
-	.reg	spillreg, s0	; pointer to user spill handler
-	.reg	s1, gr65
-	.reg	fillreg, s1	; pointer to user fill handler
-	.reg	s2, gr66
-	.reg	heapptr, s2	; pointer to heap area
-	.reg	s3, gr67
-	.reg	s4, gr68
-	.reg	s5, gr69
-	.reg	s6, gr70
-	.reg	s7, gr71
-	.reg	s8, gr72
-	.reg	s9, gr73
-	.reg	s10, gr74
-	.reg	s11, gr75
-	.reg	s12, gr76
-	.reg	s13, gr77
-	.reg	s14, gr78
-	.reg	s15, gr79
-
-	; Interrupt handler temporaries
-	.reg	i0, gr80
-	.reg	i1, gr81
-	.reg	i2, gr82
-	.reg	i3, gr83
-	.reg	i4, gr84
-	.reg	i5, gr85
-	.reg	i6, gr86
-	.reg	i7, gr87
-	.reg	i8, gr88
-	.reg	i9, gr89
-	.reg	i10, gr90
-	.reg	i11, gr91
-	.reg	i12, gr92
-	.reg	i13, gr93
-	.reg	i14, gr94
-	.reg	i15, gr95
-
-	; Subroutine/function temporaries
-	;  also used for function return values
-	.reg	t0, gr96
-	.reg	rtn, t0
-	.reg	t1, gr97
-	.reg	t2, gr98
-	.reg	t3, gr99
-	.reg	t4, gr100
-	.reg	t5, gr101
-	.reg	t6, gr102
-	.reg	t7, gr103
-	.reg	t8, gr104
-	.reg	t9, gr105
-	.reg	t10, gr106
-	.reg	t11, gr107
-	.reg	t12, gr108
-	.reg	t13, gr109
-	.reg	t14, gr110
-	.reg	t15, gr111
-
-	; User process statics
-	.reg	u0, gr112
-	.reg	u1, gr113
-	.reg	u2, gr114
-	.reg	u3, gr115
-
-	; More subroutine/function temporaries
-	.reg	t16, gr116
-	.reg	t17, gr117
-	.reg	t18, gr118
-	.reg	t19, gr119
-	.reg	t20, gr120
-
-	; Older names for the same registers
-	.reg	tmp0, gr116
-	.reg	tmp1, gr117
-	.reg	tmp2, gr118
-	.reg	tmp3, gr119
-	.reg	tmp4, gr120
-
-	; Trap handler temporaries
-	.reg	tav, gr121	; arg/temp
-	.reg	tpc, gr122	; rtn/temp
-
-	; Linkage pointers
-	.reg	lrp, gr123	; large rtn ptr
-	.reg	slp, gr124	; static link ptr
-	.reg	msp, gr125	; memory stack ptr
-	.reg	rab, gr126	; register allocate bound
-	.reg	rfb, gr127	; register free bound
-
-;-----------------------------------------------------------------------
-;Local compiler registers
-;  (only valid if frame has been established)
-;-----------------------------------------------------------------------
-
-	.reg	p15,		lr17	; outgoing arg 16
-	.reg	p14,		lr16	; outgoing arg 15
-	.reg	p13,		lr15	; outgoing arg 14
-	.reg	p12,		lr14	; outgoing arg 13
-	.reg	p11,		lr13	; outgoing arg 12
-	.reg	p10,		lr12	; outgoing arg 11
-	.reg	p9,		lr11	; outgoing arg 10
-	.reg	p8,		lr10	; outgoing arg 9
-	.reg	p7,		lr9	; outgoing arg 8
-	.reg	p6,		lr8	; outgoing arg 7
-	.reg	p5,		lr7	; outgoing arg 6
-	.reg	p4,		lr6	; outgoing arg 5
-	.reg	p3,		lr5	; outgoing arg 4
-	.reg	p2,		lr4	; outgoing arg 3
-	.reg	p1,		lr3	; outgoing arg 2
-	.reg	p0,		lr2	; outgoing arg 1
-	.reg	fp,		lr1	; frame pointer
-	.reg	raddr,		lr0	; return address
-
-;-----------------------------------------------------------------------
-; Vectors
-;-----------------------------------------------------------------------
-
-	.equ	V_ILLEG,	0	; Illegal opcode
-	.equ	V_ALIGN,	1	; Unaligned access
-	.equ	V_RANGE,	2	; Out of range
-	.equ	V_COPRE,	3	; Coprocessor not present
-	.equ	V_COEXC,	4	; Coprocessor exception
-	.equ	V_PROT,		5	; Protection violation
-	.equ	V_INSTR,	6	; Instruction access exception
-	.equ	V_DATA,		7	; Data access exception
-	.equ	V_UITLB,	8	; User-mode instruction TLB miss
-	.equ	V_UDTLB,	9	; User-mode data TLB miss
-	.equ	V_SITLB,	10	; Supervisor-mode instr TLB miss
-	.equ	V_SDTLB,	11	; Supervisor-mode data TLB miss
-	.equ	V_ITLB,		12	; Instruction TLB violation
-	.equ	V_DTLB,		13	; Data TLB violation
-	.equ	V_TIMER,	14	; Timer
-	.equ	V_TRACE,	15	; Trace
-	.equ	V_INTR0,	16	; Interrupt 0
-	.equ	V_INTR1,	17	; Interrupt 1
-	.equ	V_INTR2,	18	; Interrupt 2
-	.equ	V_INTR3,	19	; Interrupt 3
-	.equ	V_TRAP0,	20	; Trap 0
-	.equ	V_TRAP1,	21	; Trap 1
-
-;-----------------------------------------------------------------------
-;constants for LOAD and STORE operations
-;-----------------------------------------------------------------------
-
-; CE operand values
-	.equ	CE,		0b1		;coprocessor enable
-	.equ	ME,		0b0		; memory enable
-
-; CNTL operand values
-	.equ	IO,		0b1000000	;set for I/O
-	.equ	PA,		0b0100000	;force physical addr
-	.equ	SB,		0b0010000	;set for set BP
-	.equ	UA,		0b0001000	;force user mode access
-	.equ	ROM,		0b0000100	;ROM access
-	.equ	HWORD,		0b0000010	;Half word access
-	.equ	BYTE,		0b0000001	;Byte access
-	.equ	WORD,		0b0000000	;Word access
-
-;-----------------------------------------------------------------------
-; stack alignment value
-;-----------------------------------------------------------------------
-	.equ	STKALIGN, 8		; double word align
-
diff --git a/newlib/libc/sys/a29khif/sys/fpsymbol.h b/newlib/libc/sys/a29khif/sys/fpsymbol.h
deleted file mode 100644
index 3fc6ac88b..000000000
--- a/newlib/libc/sys/a29khif/sys/fpsymbol.h
+++ /dev/null
@@ -1,2970 +0,0 @@
-; @(#)fpsymbol.h	1.4 90/10/14 20:55:59, Copyright 1989, 1990 AMD 
-; start of fpsymbol.h file
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; 
-; ______________________________________________________________________
-;|______________________________________________________________________|
-;|                                                                      |
-;|             SYMBOLS FOR DEFINING THE INSTRUCTION WORD                |
-;|                                                                      |
-;|______________________________________________________________________|
-;|______________________________________________________________________|
-;
-;
-; Revision Information:
-;------------------------------------------------------------------------
-; Date: March 31, 1989
-; Author: Roy Carlson per Bob Perlman and Richard Relph
-;
-; The symbols section describing transactions was modified to contain
-; several new symbol values.  The reason for the change was to force the 
-; CA bit to be set--and remain set--once code accesses the coprocessor.  
-;
-; Future operating systems will use the Coprocessor Active (CA) bit in 
-; the Old Processor Status Register to determine whether or not to save
-; coprocessor state, etc..  This means that the instruction control field 
-; Set Coprocessor Active (SA) bit should be used as follows:
-; 
-;  	(1) any coprocessor STORE must have its SA bit set to 1, 
-;		so as to set CA,
-; 
-; and	(2) any coprocessor LOAD must have its SA bit set to 0, 
-;		so as to prevent clearing CA.
-;------------------------------------------------------------------------
-; Date: 89/01/30 12:32:13;  author: jim;  lines added/del: 5/4
-; Corrected CP_IEEE_GRADUAL_UFLOW_MODE and CP_RMS_MASK.
-; Added CP_EXCPS_POSITION, the ls bit of the CP_XXX_EXCP ensemble.
-; fixed a few typos in comments.
-;------------------------------------------------------------------------
-; Date: 89/01/23 18:00:26;  author: jim;  lines added/del: 488/468
-; Richard O. Parker
-; January 5, 1989
-; 
-; 1) The _cp_prec_field in the "cp_build_inst", "cp_build_inst_h"
-;    and "cp_build_inst_l" macros was not being defined in the case
-;    of Am29K-supported floating-point instructions (e.g., FADD, FSUB,
-;    DADD, etc.).
-; 
-; 2) The multiplexor select codes in the opcode table entries
-;    associated with the "cp_build_inst", "cp_build_inst_h" and
-;    "cp_build_inst_l" macros, pertaining to the CONVERT_F_TO_D
-;    and CONVERT_D_TO_F instructions were incorrect.
-;------------------------------------------------------------------------
-; Date: 88/12/20 14:28:26;  author: jim;  lines added/del: 1/1
-; Larry Westerman corrected definition of CP_MOVE_P.
-; Version required for Release 1.1 of the Intrinsics shipped 12/12/88.
-;------------------------------------------------------------------------
-; Date: 88/11/18 15:44:45;  author: law; 
-; Initial revision
-;
-;
-;========================================================================
-;
-; The following mnemonics are used to specify the 14 LSBs of the
-; instruction word (fields SIP, SIQ, SIT, SIF, IF, and CO).
-;
-;========================================================================
-;
-;  floating point operation codes.
-;
-   .equ  CP_PASS_P,               0x00000000  ;  pass P
-   .equ  CP_MINUSP,               0x00000040  ; -P
-   .equ  CP_ABSP,                 0x00000080  ; |P|
-   .equ  CP_SIGNT_TIMES_ABSP,     0x00000C00  ; SIGN(T) * |P|
-;
-   .equ  CP_P_PLUS_T,             0x00000001  ;  P + T
-   .equ  CP_P_MINUS_T,            0x00000101  ;  P - T
-   .equ  CP_MINUSP_PLUS_T,        0x00001001  ; -P + T
-   .equ  CP_MINUSP_MINUS_T,       0x00001101  ; -P - T
-   .equ  CP_ABS_P_PLUS_T,         0x00000081  ; |P + T|
-   .equ  CP_ABS_P_MINUS_T,        0x00000181  ; |P - T|
-   .equ  CP_ABSP_PLUS_ABST,       0x00002201  ; |P| + |T|
-   .equ  CP_ABSP_MINUS_ABST,      0x00002301  ; |P| - |T|
-   .equ  CP_ABS_ABSP_MINUS_ABST,  0x00002381  ; ||P| - |T||
-;
-   .equ  CP_P_TIMES_Q,            0x00000002  ;  P * Q
-   .equ  CP_MINUSP_TIMES_Q,       0x00001002  ; -P * Q
-   .equ  CP_ABS_P_TIMES_Q,        0x00000082  ; |P * Q|
-;
-   .equ  CP_COMPARE_P_AND_T,      0x00000103  ; compare P and T
-;
-   .equ  CP_MAX_P_AND_T,          0x00000104  ; max P,T
-   .equ  CP_MAX_ABSP_AND_ABST,    0x00002304  ; max |P|, |T|
-;
-   .equ  CP_MIN_P_AND_T,          0x00001005  ; min P,T
-   .equ  CP_MIN_ABSP_AND_ABST,    0x00003205  ; min |P|,|T|
-   .equ  CP_LIMIT_P_TO_MAGT,      0x00003A05  ; limit P to magnitude of T
-;
-   .equ  CP_CONVERT_T_TO_INT,     0x00000006  ; convert T to integer
-;
-   .equ  CP_SCALE_T_TO_INT_BY_Q,  0x00000007  ; scale T to integer by Q
-;
-   .equ  CP_PQ_PLUS_T,            0x00000008  ; (P * Q) + T
-   .equ  CP_MINUSPQ_PLUS_T,       0x00001008  ; (-P * Q) + T
-   .equ  CP_PQ_MINUS_T,           0x00000108  ; (P * Q) - T
-   .equ  CP_MINUSPQ_MINUS_T,      0x00001108  ; (-P * Q) - T
-   .equ  CP_ABSPQ_PLUS_ABST,      0x00002A08  ; |(P * Q)| + T
-   .equ  CP_MINUSABSPQ_PLUS_ABST, 0x00003A08  ;-|(P * Q)| + T
-   .equ  CP_ABSPQ_MINUS_ABST,     0x00002B08  ; |(P * Q)| - |T|
-;
-   .equ  CP_ROUND_T_TO_INT,       0x00000009  ; round T to integral value
-;
-   .equ  CP_RECIPROCAL_OF_P,      0x0000000A  ; reciprocal of P
-;
-   .equ  CP_CONVERT_T_TO_ALT,     0x0000000B  ; convert T to alt. f.p. format
-   .equ  CP_CONVERT_T_FROM_ALT,   0x0000000C  ; convert T to alt. f.p. format
-;
-;
-;  integer operation codes.
-;
-   .equ  CP_I_PASS_P,             0x00000020  ; integer pass P
-   .equ  CP_I_MINUSP,             0x00000060  ; integer -P
-   .equ  CP_I_ABSP,               0x000000A0  ; integer |P|
-   .equ  CP_I_SIGNT_TIMES_ABSP,   0x00000C20  ; integer SIGN(T) * |P|
-;
-   .equ  CP_I_P_PLUS_T,           0x00000021  ; integer P + T
-   .equ  CP_I_P_MINUS_T,          0x00000121  ; integer P - T
-   .equ  CP_I_MINUSP_PLUS_T,      0x00001021  ; integer -P + T
-   .equ  CP_I_ABS_P_PLUS_T,       0x000000A1  ; integer |P + T|
-   .equ  CP_I_ABS_P_MINUS_T,      0x000001A1  ; integer |P - T|
-;
-   .equ  CP_I_P_TIMES_Q,          0x00000022  ; integer P * Q
-;
-   .equ  CP_I_COMPARE_P_AND_T,    0x00000123  ; integer compare P and T
-;
-   .equ  CP_I_MAX_P_AND_T,        0x00000124  ; integer max P,T
-;
-   .equ  CP_I_MIN_P_AND_T,        0x00001025  ; integer min P,T
-;
-   .equ  CP_I_CONVERT_T_TO_FLOAT, 0x00000026  ; integer convert T to f.p.
-;
-   .equ  CP_I_SCALE_T_TO_FLOAT_BY_Q, 0x00000027  ; integer scale T to f.p. by Q
-;
-   .equ  CP_I_P_OR_T,             0x00000030  ; integer P OR T
-;
-   .equ  CP_I_P_AND_T,            0x00000031  ; integer P AND T
-;
-   .equ  CP_I_P_XOR_T,            0x00000032  ; integer P XOR T
-;
-   .equ  CP_I_NOT_T,              0x00000032  ; integer NOT T
-;
-   .equ  CP_I_LSHIFT_P_BY_Q,      0x00000033  ; integer logical shift P by Q
-;                                               places
-;
-   .equ  CP_I_ASHIFT_P_BY_Q,      0x00000034  ; integer arith. shift P by Q
-;                                               places
-;
-   .equ  CP_I_FSHIFT_PT_BY_Q,     0x00000035  ; integer funnel shift PT by Q
-;                                               places
-;
-;
-; move instruction (f.p. or integer)
-;
-   .equ  CP_MOVE_P,               0x00000018  ; move operand P
-;
-;
-;========================================================================
-;
-;  precision codes for the the operands in registers R and S, and for
-;  the result (instruction word fields IPR, RPR).
-;
-;========================================================================
-;
-;
-   .equ  CP_D_S,                  0x00008000  ;Double result, single input(s)
-   .equ  CP_S_D,                  0x00004000  ;Single result, double input(s)
-   .equ  CP_D_D,                  0x00000000  ;Double result, double input(s)
-   .equ  CP_S_S,                  0x0000C000  ;Single result, single input(s)
-;
-;========================================================================
-;
-; The following mnemonics are used to specify the 16 LSBs of an Am29027
-; instruction word for floating-point instructions supported by the
-; Am29000 instruction set.
-;
-;========================================================================
-;
-   .equ  CP_FADD,                 0x0000C001
-   .equ  CP_DADD,                 0x00000001
-   .equ  CP_FSUB,                 0x0000C101
-   .equ  CP_DSUB,                 0x00000101
-   .equ  CP_FMUL,                 0x0000C002
-   .equ  CP_DMUL,                 0x00000002
-   .equ  CP_FEQ,                  0x0000C103
-   .equ  CP_DEQ,                  0x00000103
-   .equ  CP_FGE,                  0x0000C103
-   .equ  CP_DGE,                  0x00000103
-   .equ  CP_FGT,                  0x0000C103
-   .equ  CP_DGT,                  0x00000103
-   .equ  CP_CONVERT_I_TO_F,       0x0000C026  ; CONVERT (int -> s.p.)
-   .equ  CP_CONVERT_I_TO_D,       0x00008026  ; CONVERT (int -> d.p.)
-   .equ  CP_CONVERT_F_TO_I,       0x0000C006  ; CONVERT (s.p.-> int)
-   .equ  CP_CONVERT_D_TO_I,       0x00004006  ; CONVERT (d.p.-> int)
-   .equ  CP_CONVERT_F_TO_D,       0x00008000  ; CONVERT (s.p.-> d.p.)
-   .equ  CP_CONVERT_D_TO_F,       0x00004000  ; CONVERT (d.p.-> s.p.)
-;
-;
-;========================================================================
-;
-;  operand select codes (instruction word fields PMS, QMS, TMS).
-;
-;========================================================================
-;
-;
-   .equ  CP_P_EQ_R,               0x00000000
-   .equ  CP_P_EQ_S,               0x01000000
-   .equ  CP_P_EQ_0,               0x02000000
-   .equ  CP_P_EQ_ONE_HALF,        0x03000000
-   .equ  CP_P_EQ_IMINUS1,         0x03000000
-   .equ  CP_P_EQ_1,               0x04000000
-   .equ  CP_P_EQ_2,               0x05000000
-   .equ  CP_P_EQ_3,               0x06000000
-   .equ  CP_P_EQ_PI,              0x07000000
-   .equ  CP_P_EQ_IMINUSMAX,       0x07000000
-   .equ  CP_P_EQ_RF0,             0x08000000
-   .equ  CP_P_EQ_RF1,             0x09000000
-   .equ  CP_P_EQ_RF2,             0x0A000000
-   .equ  CP_P_EQ_RF3,             0x0B000000
-   .equ  CP_P_EQ_RF4,             0x0C000000
-   .equ  CP_P_EQ_RF5,             0x0D000000
-   .equ  CP_P_EQ_RF6,             0x0E000000
-   .equ  CP_P_EQ_RF7,             0x0F000000
-;
-   .equ  CP_Q_EQ_R,               0x00000000
-   .equ  CP_Q_EQ_S,               0x00100000
-   .equ  CP_Q_EQ_0,               0x00200000
-   .equ  CP_Q_EQ_ONE_HALF,        0x00300000
-   .equ  CP_Q_EQ_IMINUS1,         0x00300000
-   .equ  CP_Q_EQ_1,               0x00400000
-   .equ  CP_Q_EQ_2,               0x00500000
-   .equ  CP_Q_EQ_3,               0x00600000
-   .equ  CP_Q_EQ_PI,              0x00700000
-   .equ  CP_Q_EQ_IMINUSMAX,       0x00700000
-   .equ  CP_Q_EQ_RF0,             0x00800000
-   .equ  CP_Q_EQ_RF1,             0x00900000
-   .equ  CP_Q_EQ_RF2,             0x00A00000
-   .equ  CP_Q_EQ_RF3,             0x00B00000
-   .equ  CP_Q_EQ_RF4,             0x00C00000
-   .equ  CP_Q_EQ_RF5,             0x00D00000
-   .equ  CP_Q_EQ_RF6,             0x00E00000
-   .equ  CP_Q_EQ_RF7,             0x00F00000
-;
-   .equ  CP_T_EQ_R,               0x00000000
-   .equ  CP_T_EQ_S,               0x00010000
-   .equ  CP_T_EQ_0,               0x00020000
-   .equ  CP_T_EQ_ONE_HALF,        0x00030000
-   .equ  CP_T_EQ_IMINUS1,         0x00030000
-   .equ  CP_T_EQ_1,               0x00040000
-   .equ  CP_T_EQ_2,               0x00050000
-   .equ  CP_T_EQ_3,               0x00060000
-   .equ  CP_T_EQ_PI,              0x00070000
-   .equ  CP_T_EQ_IMINUSMAX,       0x00070000
-   .equ  CP_T_EQ_RF0,             0x00080000
-   .equ  CP_T_EQ_RF1,             0x00090000
-   .equ  CP_T_EQ_RF2,             0x000A0000
-   .equ  CP_T_EQ_RF3,             0x000B0000
-   .equ  CP_T_EQ_RF4,             0x000C0000
-   .equ  CP_T_EQ_RF5,             0x000D0000
-   .equ  CP_T_EQ_RF6,             0x000E0000
-   .equ  CP_T_EQ_RF7,             0x000F0000
-;
-;
-;========================================================================
-;
-;  destination select codes (instruction word fields RF, RFS)
-;
-;========================================================================
-;
-;
-   .equ  CP_DEST_EQ_GP,           0x00000000
-   .equ  CP_DEST_EQ_RF0,          0x80000000
-   .equ  CP_DEST_EQ_RF1,          0x90000000
-   .equ  CP_DEST_EQ_RF2,          0xA0000000
-   .equ  CP_DEST_EQ_RF3,          0xB0000000
-   .equ  CP_DEST_EQ_RF4,          0xC0000000
-   .equ  CP_DEST_EQ_RF5,          0xD0000000
-   .equ  CP_DEST_EQ_RF6,          0xE0000000
-   .equ  CP_DEST_EQ_RF7,          0xF0000000
-;
-;
-; ______________________________________________________________________
-;|______________________________________________________________________|
-;|                                                                      |
-;|    SYMBOLS FOR DEFINING THE MODE REGISTER DOUBLE WORD                |
-;|                                                                      |
-;|______________________________________________________________________|
-;|______________________________________________________________________|
-;
-;
-;
-    .equ  CP_PFF_MASK,            0x00000003  ; primary f.p. format mask
-    .equ  CP_PFF_EQ_IEEE,         0x00000000  ; primary f.p. format = IEEE
-    .equ  CP_PFF_EQ_DECD,         0x00000001  ; primary f.p. format = DEC D
-    .equ  CP_PFF_EQ_DECG,         0x00000002  ; primary f.p. format = DEC G
-    .equ  CP_PFF_EQ_IBM,          0x00000003  ; primary f.p. format = IBM
-    .equ  CP_PFF_POSITION,        0
-;
-    .equ  CP_AFF_MASK,            0x0000000C  ; alternate f.p. format mask
-    .equ  CP_AFF_EQ_IEEE,         0x00000000  ; alternate f.p. format = IEEE
-    .equ  CP_AFF_EQ_DECD,         0x00000004  ; alternate f.p. format = DEC D
-    .equ  CP_AFF_EQ_DECG,         0x00000008  ; alternate f.p. format = DEC G
-    .equ  CP_AFF_EQ_IBM,          0x0000000C  ; alternate f.p. format = IBM
-    .equ  CP_AFF_POSITION,        2
-;
-    .equ  CP_SAT_MASK,            0x00000010  ; saturate mode (SAT) mask
-    .equ  CP_SATURATE_MODE,       0x00000010  ; enable saturate mode (SAT=1)
-    .equ  CP_SAT_POSITION,        4
-;
-    .equ  CP_AP_MASK,             0x00000020  ; affine/proj. mode (AP) mask
-    .equ  CP_AFFINE_MODE,         0x00000020  ; enable affine mode (AP=1)
-    .equ  CP_PROJECTIVE_MODE,     0x00000000  ; enable projective mode (AP=0)
-    .equ  CP_AP_POSITION,         5
-;
-    .equ  CP_TRP_MASK,            0x00000040  ; IEEE trap mode (TRP) mask
-    .equ  CP_IEEE_TRAPS_ENABLED,  0x00000040  ; IEEE trap mode enabled (TRP=1)
-    .equ  CP_IEEE_TRAPS_DISABLED, 0x00000000  ; IEEE trap mode disabled (TRP=0)
-    .equ  CP_TRP_POSITION,        6
-;
-    .equ  CP_SU_MASK,                0x00000080  ; IEEE sud. uflow (SU) mask
-    .equ  CP_IEEE_SUDDEN_UFLOW_MODE, 0x00000080  ; IEEE sud. uflow mode (SU=1)
-    .equ  CP_IEEE_GRADUAL_UFLOW_MODE,0x00000000  ; IEEE grad uflow mode (SU=0)
-    .equ  CP_SU_POSITION,            7
-;
-    .equ  CP_BS_MASK,             0x00000100  ; IBM sig. mask (BS)
-    .equ  CP_BS_POSITION,         8
-;
-    .equ  CP_BU_MASK,             0x00000200  ; IBM underflow mask (BU)
-    .equ  CP_BU_POSITION,         9
-;
-    .equ  CP_MS_MASK,                0x00000800  ; signed int. mpy (MS) mask
-    .equ  CP_SIGNED_INT_MPY_MODE,    0x00000800  ; signed int. mpy mode (MS=1)
-    .equ  CP_UNSIGNED_INT_MPY_MODE,  0x00000000  ; unsigned int. mpy mode (MS=0)
-    .equ  CP_MS_POSITION,            11
-;
-    .equ  CP_MF_MASK,             0x00003000  ; int. mult. fmt. mode (MF) mask
-    .equ  CP_MF_EQ_LSBS,          0x00000000  ; int. mult. fmt. = LSBs
-    .equ  CP_MF_EQ_LSBSFA,        0x00001000  ; int. mult. fmt. = LSBs,fmt. adj.
-    .equ  CP_MF_EQ_MSBS,          0x00002000  ; int. mult. fmt. = MSBs
-    .equ  CP_MF_EQ_MSBSFA,        0x00003000  ; int. mult. fmt. = MSBs,fmt. adj.
-    .equ  CP_MF_POSITION,         12
-;
-    .equ  CP_RMS_MASK,            0x0001C000  ; round mode (RMS) mask
-    .equ  CP_RMS_EQ_NEAREST,      0x00000000  ; round mode = to nearest
-    .equ  CP_RMS_EQ_MINUS_INF,    0x00004000  ; round mode = toward -oo
-    .equ  CP_RMS_EQ_PLUS_INF,     0x00008000  ; round mode = toward +oo
-    .equ  CP_RMS_EQ_ZERO,         0x0000C000  ; round mode = toward zero
-    .equ  CP_RMS_POSITION,        14
-;
-    .equ  CP_PL_MASK,             0x00100000  ; pipeline mode (PL) mask
-    .equ  CP_FLOWTHROUGH_MODE,    0x00000000  ; select flow-through mode
-    .equ  CP_PIPELINE_MODE,       0x00100000  ; select pipeline mode
-    .equ  CP_PL_POSITION,         20
-;
-    .equ  CP_INVALID_OP_EXCP_MASK, 0x00400000  ; invalid operation excp. mask(IM)
-    .equ  CP_RESERVED_OP_EXCP_MASK,0x00800000  ; reserved operand excp. mask(RM)
-    .equ  CP_OVERFLOW_EXCP_MASK,   0x01000000  ; overflow exception mask (VM)
-    .equ  CP_UNDERFLOW_EXCP_MASK,  0x02000000  ; underflow exception mask(UM)
-    .equ  CP_INEXACT_EXCP_MASK,    0x04000000  ; inexact result excp. mask(XM)
-    .equ  CP_ZERO_EXCP_MASK,       0x08000000  ; zero result exception mask (ZM)
-    .equ  CP_EXCPS_POSITION,       22
-;
-    .equ  CP_PLTC_MASK,           0x0000000F  ; pipeline timer count (PLTC) mask
-    .equ  CP_PLTC_EQ_2,           0x00000002  ; pipeline timer count = 2
-    .equ  CP_PLTC_EQ_3,           0x00000003  ; pipeline timer count = 3
-    .equ  CP_PLTC_EQ_4,           0x00000004  ; pipeline timer count = 4
-    .equ  CP_PLTC_EQ_5,           0x00000005  ; pipeline timer count = 5
-    .equ  CP_PLTC_EQ_6,           0x00000006  ; pipeline timer count = 6
-    .equ  CP_PLTC_EQ_7,           0x00000007  ; pipeline timer count = 7
-    .equ  CP_PLTC_EQ_8,           0x00000008  ; pipeline timer count = 8
-    .equ  CP_PLTC_EQ_9,           0x00000009  ; pipeline timer count = 9
-    .equ  CP_PLTC_EQ_10,          0x0000000A  ; pipeline timer count = 10
-    .equ  CP_PLTC_EQ_11,          0x0000000B  ; pipeline timer count = 11
-    .equ  CP_PLTC_EQ_12,          0x0000000C  ; pipeline timer count = 12
-    .equ  CP_PLTC_EQ_13,          0x0000000D  ; pipeline timer count = 13
-    .equ  CP_PLTC_EQ_14,          0x0000000E  ; pipeline timer count = 14
-    .equ  CP_PLTC_EQ_15,          0x0000000F  ; pipeline timer count = 15
-    .equ  CP_PLTC_POSITION,       0
-;
-    .equ  CP_MATC_MASK,           0x000000F0  ; mpy-acc timer count (MATC) mask
-    .equ  CP_MATC_EQ_2,           0x00000020  ; mpy-acc timer count = 2
-    .equ  CP_MATC_EQ_3,           0x00000030  ; mpy-acc timer count = 3
-    .equ  CP_MATC_EQ_4,           0x00000040  ; mpy-acc timer count = 4
-    .equ  CP_MATC_EQ_5,           0x00000050  ; mpy-acc timer count = 5
-    .equ  CP_MATC_EQ_6,           0x00000060  ; mpy-acc timer count = 6
-    .equ  CP_MATC_EQ_7,           0x00000070  ; mpy-acc timer count = 7
-    .equ  CP_MATC_EQ_8,           0x00000080  ; mpy-acc timer count = 8
-    .equ  CP_MATC_EQ_9,           0x00000090  ; mpy-acc timer count = 9
-    .equ  CP_MATC_EQ_10,          0x000000A0  ; mpy-acc timer count = 10
-    .equ  CP_MATC_EQ_11,          0x000000B0  ; mpy-acc timer count = 11
-    .equ  CP_MATC_EQ_12,          0x000000C0  ; mpy-acc timer count = 12
-    .equ  CP_MATC_EQ_13,          0x000000D0  ; mpy-acc timer count = 13
-    .equ  CP_MATC_EQ_14,          0x000000E0  ; mpy-acc timer count = 14
-    .equ  CP_MATC_EQ_15,          0x000000F0  ; mpy-acc timer count = 15
-    .equ  CP_MATC_POSITION,       4
-;
-    .equ  CP_MVTC_MASK,           0x00000F00  ; MOVE P timer count (MVTC) mask
-    .equ  CP_MVTC_EQ_2,           0x00000200  ; MOVE P timer count = 2
-    .equ  CP_MVTC_EQ_3,           0x00000300  ; MOVE P timer count = 3
-    .equ  CP_MVTC_EQ_4,           0x00000400  ; MOVE P timer count = 4
-    .equ  CP_MVTC_EQ_5,           0x00000500  ; MOVE P timer count = 5
-    .equ  CP_MVTC_EQ_6,           0x00000600  ; MOVE P timer count = 6
-    .equ  CP_MVTC_EQ_7,           0x00000700  ; MOVE P timer count = 7
-    .equ  CP_MVTC_EQ_8,           0x00000800  ; MOVE P timer count = 8
-    .equ  CP_MVTC_EQ_9,           0x00000900  ; MOVE P timer count = 9
-    .equ  CP_MVTC_EQ_10,          0x00000A00  ; MOVE P timer count = 10
-    .equ  CP_MVTC_EQ_11,          0x00000B00  ; MOVE P timer count = 11
-    .equ  CP_MVTC_EQ_12,          0x00000C00  ; MOVE P timer count = 12
-    .equ  CP_MVTC_EQ_13,          0x00000D00  ; MOVE P timer count = 13
-    .equ  CP_MVTC_EQ_14,          0x00000E00  ; MOVE P timer count = 14
-    .equ  CP_MVTC_EQ_15,          0x00000F00  ; MOVE P timer count = 15
-    .equ  CP_MVTC_POSITION,       8
-;
-    .equ  CP_AD_MASK,             0x00001000  ;
-    .equ  CP_ADVANCE_DRDY_MODE,   0x00001000  ;
-    .equ  CP_NORMAL_DRDY_MODE,    0x00000000  ;
-    .equ  CP_AD_POSITION,         12
-;
-    .equ  CP_HE_MASK,               0x00002000  ; Halt-on-error mask (HE)
-    .equ  CP_HALT_ON_ERROR_ENABLED, 0x00002000  ; Halt-on-error enabled (HE=1)
-    .equ  CP_HALT_ON_ERROR_DISABLED,0x00000000  ; Halt-on-error disabled (HE=0)
-    .equ  CP_HE_POSITION,           13
-;
-    .equ  CP_EX_MASK,             0x00004000  ; EXCP enable mask (EX)
-    .equ  CP_EXCP_ENABLED,        0x00004000  ; EXCP enabled (EX=1)
-    .equ  CP_EXCP_DISABLED,       0x00000000  ; EXCP disabled (EX=0)
-    .equ  CP_EX_POSITION,         14
-;
-;
-;
-; ______________________________________________________________________
-;|______________________________________________________________________|
-;|                                                                      |
-;|      SYMBOLS FOR DEFINING THE STATUS REGISTER WORD                   |
-;|                                                                      |
-;|______________________________________________________________________|
-;|______________________________________________________________________|
-;
-;
-   .equ CP_INVALID_OP_EXCP,           0x00000001
-   .equ CP_INVALID_OP_EXCP_POSITION,  0
-;
-   .equ CP_RESERVED_OP_EXCP,          0x00000002
-   .equ CP_RESERVED_OP_EXCP_POSITION, 1
-;
-   .equ CP_OVERFLOW_EXCP,             0x00000004
-   .equ CP_OVERFLOW_EXCP_POSITION,    2
-;
-   .equ CP_UNDERFLOW_EXCP,            0x00000008
-   .equ CP_UNDERFLOW_EXCP_POSITION,   3
-;
-   .equ CP_INEXACT_EXCP,              0x00000010
-   .equ CP_INEXACT_EXCP_POSITION,     4
-;
-   .equ CP_ZERO_EXCP,                 0x00000020
-   .equ CP_ZERO_EXCP_POSITION,        5
-;
-   .equ CP_EXCP_STATUS_MASK,          0x00000040
-   .equ CP_EXCP_STATUS_FLAG_POSITION, 6
-;
-   .equ CP_R_TEMP_VALID_MASK,         0x00000080
-   .equ R_TEMP_VALID_POSITION,        7
-;
-   .equ CP_S_TEMP_VALID_MASK,         0x00000100
-   .equ CP_S_TEMP_VALID_POSITION,     8
-;
-   .equ CP_I_TEMP_VALID_FLAG,         0x00000200
-   .equ CP_I_TEMP_VALID_POSITION,     9
-;
-   .equ CP_OPERATION_PENDING_MASK,    0x00000400
-   .equ CP_OPERATION_PENDING_POSITION,10
-;
-;
-; ______________________________________________________________________
-;|______________________________________________________________________|
-;|                                                                      |
-;|      SYMBOLS FOR DEFINING THE FLAG REGISTER WORD                     |
-;|                                                                      |
-;|______________________________________________________________________|
-;|______________________________________________________________________|
-;
-;
-   .equ CP_INVALID_OP_FLAG,           0x00000001
-   .equ CP_INVALID_OP_FLAG_POSITION,  0
-;
-   .equ CP_CARRY_FLAG,                0x00000001
-   .equ CP_CARRY_FLAG_POSITION,       0
-;
-   .equ CP_RESERVED_OP_FLAG,          0x00000002
-   .equ CP_RESERVED_OP_FLAG_POSITION, 1
-;
-   .equ CP_OVERFLOW_FLAG,             0x00000004
-   .equ CP_OVERFLOW_FLAG_POSITION,    2
-;
-   .equ CP_UNORDERED_FLAG,            0x00000004
-   .equ CP_UNORDERED_FLAG_POSITION,   2
-;
-   .equ CP_UNDERFLOW_FLAG,            0x00000008
-   .equ CP_UNDERFLOW_FLAG_POSITION,   3
-;
-   .equ CP_LESS_THAN_FLAG,            0x00000008
-   .equ CP_LESS_THAN_POSITION,        3
-;
-   .equ CP_WINNER_FLAG,               0x00000008
-   .equ CP_WINNER_FLAG_POSITION,      3
-;
-   .equ CP_INEXACT_FLAG,              0x00000010
-   .equ CP_INEXACT_FLAG_POSITION,     4
-;
-   .equ CP_GREATER_THAN_FLAG,         0x00000010
-   .equ CP_GREATER_THAN_FLAG_POSITION,4
-;
-   .equ CP_ZERO_FLAG,                 0x00000020
-   .equ CP_ZERO_FLAG_POSITION,        5
-;
-   .equ CP_EQUAL_FLAG,                0x00000020
-   .equ CP_EQUAL_FLAG_POSITION,       5
-;
-   .equ CP_SIGN_FLAG,                 0x00000040
-   .equ CP_SIGN_FLAG_POSITION,        6
-;
-;
-; ______________________________________________________________________
-;|______________________________________________________________________|
-;|                                                                      |
-;|                 SYMBOLS FOR TRANSACTION REQUEST TYPES                |
-;|                                                                      |
-;|______________________________________________________________________|
-;|______________________________________________________________________|
-;
-;
-; write requests
-;
-; Note: Each WRITE_* transaction request, plus ADV_TEMPS sets the CA
-; (Coprocessor Active) bit in the 29000 Current Processor Status Register.
-;
-   .equ  CP_WRITE_R,              0x20  ;write sing or doub to R register
-   .equ  CP_WRITE_S,              0x21  ;write sing or doub to S register
-   .equ  CP_WRITE_RS,             0x22  ;write sing operands to R and S
-   .equ  CP_WRITE_MODE,           0x23  ;write mode double word to 29027
-   .equ  CP_WRITE_STATUS,         0x24  ;write status word to 29027
-   .equ  CP_WRITE_PREC,           0x25  ;write reg. file precision word
-                                        ; to 29027
-   .equ  CP_WRITE_INST,           0x26  ;write instruction to 29027
-   .equ  CP_ADV_TEMPS,            0x27  ;move R-Temp, S-Temp into R,S
-;
-; read requests
-;
-   .equ  CP_READ_MSBS,            0x00  ;read sing result or MSB of doub
-   .equ  CP_READ_LSBS,            0x01  ;read LSB of doub result
-   .equ  CP_READ_FLAGS,           0x02  ;read 29027 flag register
-   .equ  CP_READ_STATUS,          0x03  ;read 29027 status register
-   .equ  CP_SAVE_STATE,           0x04  ;read one word of 29027 state
-;
-; "start operation" symbol; this is "OR"ed with a WRITE_R, WRITE_S,
-;    WRITE_RS, or WRITE_INST symbol.
-;
-
-   .equ  CP_START,                0b1000000  ;bit to start 29027 operation
-;
-; "suppress exceptions reporting" symbol; this is "OR"ed with a ed
-;
-;
-
-   .equ  CP_NO_ERR,               0b1000000  ;suppress exception reporting
-;                                            ;   during load.
-;       cp_write_r       - transfers 32- or 64-bit operand to Am29027
-;                          register R
-;       cp_write_s       - transfers 32- or 64-bit operand to Am29027
-;                          register S
-;       cp_write_rs      - transfers two 32-bit floating-point operands to
-;                          Am29027 registers R and S
-;       cp_write_prec    - transfers a word to the Am29027 precision register
-;       cp_write_status  - transfers a word to the Am29027 status register
-;       cp_write_inst    - transfers an instruction to the Am29027
-;                          instruction register
-;       cp_advance_temps - transfers the contents of the Am29027 temporary
-;                          registers to the corresponding working registers
-;       cp_write_mode    - transfers a mode specification the the Am29027
-;                          mode register
-;       cp_read_dp       - read a double-precision floating-point result
-;                          from the Am29027
-;       cp_read_sp       - read a single-precision floating-point result
-;                          from the Am29027
-;       cp_read_int      - read an integer result from the Am29027
-;       cp_read_flags    - read the contents of the Am29027 flag register
-;       cp_read_status   - read the contents of the Am29027 status register
-;       cp_read_state_wd - read a single Am29027 state word
-;       cp_save_state    - save Am29027 state
-;       cp_restore_state - restore Am29027 state
-;       cp_build_inst    - build an Am29027 instruction
-;       cp_build_inst_h  - build 16 MSBs of an Am29027 instruction
-;       cp_build_inst_l  - build 16 LSBs of an Am29027 instruction
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_r
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers a 32- or 64-bit operand to Am29027 input register R
-;
-;  PARAMETERS:
-;    reg      - the Am29000 g.p. register containing the 32-bit operand to be
-;               transferred, or the 32 MSBs of the 64-bit operand to be
-;               transferred.
-;
-;    LSB_reg  - the Am29000 g.p. register containing the 32 LSBs of the
-;               64-bit operand to be transferred
-;
-;    INT      - indicates that the operand to be transferred is a 32-bit
-;               integer
-;
-;    START    - indicates that a new Am29027 operation is to be started
-;               once the operand has been transferred
-;
-;
-;  USAGE:
-;
-;    cp_write_r  reg [,LSB_reg] [,START]       for floating-point operands
-; or cp_write_r  reg, INT [,START]             for integer operands
-;
-;    Transferring double-precision floating-point operands - Either of
-;       two forms is acceptable:
-;
-;               cp_write_r   reg
-;          or   cp_write_r   reg, LSB_reg
-;
-;       If LSB_reg is omitted, the LSBs are taken from the next g.p.
-;       register.
-;
-;       Ex:     cp_write_r   lr2     Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register R, and the contents of lr3
-;                                    to the least-significant half.
-;
-;               cp_write_r   lr2,lr5 Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register R, and the contents of lr5
-;                                    to the least-significant half.
-;
-;
-;    Transferring single-precision floating-point operands - Use the
-;       form:
-;
-;               cp_write_r   reg
-;
-;
-;       Ex:     cp_write_r   lr2     Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register R, (the contents of lr3
-;                                    will be transferred to the least-
-;                                    significant half of register R, but
-;                                    these bits are don't cares).
-;
-;
-;    Transferring integer operands - Use the form:
-;
-;               cp_write_r   reg,INT
-;
-;
-;       Ex:     cp_write_r   lr2,INT Transfers the contents of lr2 to
-;                                    the least-significant half of Am29027
-;                                    register R, (the contents of lr2
-;                                    will also be transferred to the most-
-;                                    significant half of register R, but
-;                                    these bits are don't cares).
-;
-;
-;    Starting an Am29027 operation - Any of the forms above may be
-;       appended with parameter START, e.g.:
-;
-;               cp_write_r   lr2,START
-;
-;               cp_write_r   lr2,lr5,START
-;
-;               cp_write_r   lr2,INT,START
-;
-;
-;============================================================================
-;
- .macro cp_write_r,p1,p2,p3
-;
-   .if $narg==0
-     .err
-     .print "cp_WRITE_R: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     store 1,CP_WRITE_R,p1,%%((&p1)+1)
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","INT"
-       store 1,CP_WRITE_R,p1,p1
-       .exitm
-     .endif
-;
-     .ifeqs "@p2@","START"
-       store 1,CP_WRITE_R|CP_START,p1,%%((&p1)+1)
-       .exitm
-     .endif
-;
-     store 1,CP_WRITE_R,p1,p2
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg==3
-;
-     .ifeqs "@p2@","START"
-       .ifeqs "@p3@","INT"
-         store 1,CP_WRITE_R|CP_START,p1,p1
-       .else
-         .err
-         .print "cp_write_r: bad parameter list"
-       .endif
-       .exitm
-     .endif
-;
-     .ifeqs "@p2@","INT"
-       .ifeqs "@p3@","START"
-         store 1,CP_WRITE_R|CP_START,p1,p1
-       .else
-         .err
-         .print "cp_write_r: bad parameter list"
-       .endif
-       .exitm
-     .endif
-;
-     .ifeqs "@p3@","START"
-       store 1,CP_WRITE_R|CP_START,p1,p2
-     .else
-       .err
-       .print "cp_write_r: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=4
-     .err
-     .print "cp_write_r: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_s
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers a 32- or 64-bit operand to Am29027 input register S
-;
-;  PARAMETERS:
-;    reg      - the Am29000 g.p. register containing the 32-bit operand to be
-;               transferred, or the 32 MSBs of the 64-bit operand to be
-;               transferred.
-;
-;    LSB_reg  - the Am29000 g.p. register containing the 32 LSBs of the
-;               64-bit operand to be transferred
-;
-;    INT      - indicates that the operand to be transferred is a 32-bit
-;               integer
-;
-;    START    - indicates that a new Am29027 operation is to be started
-;               once the operand has been transferred
-;
-;
-;  USAGE:
-;
-;    cp_write_s  reg [,LSB_reg] [,START]       for floating-point operands
-; or cp_write_s  reg, INT [,START]             for integer operands
-;
-;    Transferring double-precision floating-point operands - Either of
-;       two forms is acceptable:
-;
-;               cp_write_s   reg
-;          or   cp_write_s   reg, LSB_reg
-;
-;       If LSB_reg is omitted, the LSBs are taken from the next g.p.
-;       register.
-;
-;       Ex:     cp_write_s   lr2     Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register S, and the contents of lr3
-;                                    to the least-significant half.
-;
-;               cp_write_s   lr2,lr5 Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register S, and the contents of lr5
-;                                    to the least-significant half.
-;
-;
-;    Transferring single-precision floating-point operands - Use the
-;       form:
-;
-;               cp_write_s   reg
-;
-;
-;       Ex:     cp_write_s   lr2     Transfers the contents of lr2 to
-;                                    the most-significant half of Am29027
-;                                    register S, (the contents of lr3
-;                                    will be transferred to the least-
-;                                    significant half of register S, but
-;                                    these bits are don't cares).
-;
-;
-;    Transferring integer operands - Use the form:
-;
-;               cp_write_s   reg,INT
-;
-;
-;       Ex:     cp_write_s   lr2,INT Transfers the contents of lr2 to
-;                                    the least-significant half of Am29027
-;                                    register S, (the contents of lr2
-;                                    will also be transferred to the most-
-;                                    significant half of register S, but
-;                                    these bits are don't cares).
-;
-;
-;    Starting an Am29027 operation - Any of the forms above may be
-;       appended with parameter START, e.g.:
-;
-;               cp_write_s   lr2,START
-;
-;               cp_write_s   lr2,lr5,START
-;
-;               cp_write_s   lr2,INT,START
-;
-;
-;============================================================================
-;
- .macro cp_write_s,p1,p2,p3
-;
-   .if $narg==0
-     .err
-     .print "cp_write_s: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     store 1,CP_WRITE_S,p1,%%((&p1)+1)
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","INT"
-       store 1,CP_WRITE_S,p1,p1
-       .exitm
-     .endif
-;
-     .ifeqs "@p2@","START"
-       store 1,CP_WRITE_S|CP_START,p1,%%((&p1)+1)
-       .exitm
-     .endif
-;
-     store 1,CP_WRITE_S,p1,p2
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg==3
-;
-     .ifeqs "@p2@","START"
-       .ifeqs "@p3@","INT"
-         store 1,CP_WRITE_S|CP_START,p1,p1
-       .else
-         .err
-         .print "cp_write_s: bad parameter list"
-       .endif
-       .exitm
-     .endif
-;
-     .ifeqs "@p2@","INT"
-       .ifeqs "@p3@","START"
-         store 1,CP_WRITE_S|CP_START,p1,p1
-       .else
-         .err
-         .print "cp_write_s: bad parameter list"
-       .endif
-       .exitm
-     .endif
-;
-     .ifeqs "@p3@","START"
-       store 1,CP_WRITE_S|CP_START,p1,p2
-     .else
-       .err
-       .print "cp_write_s: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=4
-     .err
-     .print "cp_write_s: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_rs
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers two 32-bit floating-point operands to Am29027
-;              input registers R and S
-;
-;  PARAMETERS:
-;    reg1     - the Am29000 g.p. register containing the 32-bit operand to be
-;               transferred to register R
-;
-;    reg2     - the Am29000 g.p. register containing the 32-bit operand to be
-;               transferred to register S
-;
-;    START    - indicates that a new Am29027 operation is to be started
-;               once the operands have been transferred
-;
-;
-;  USAGE:
-;
-;    cp_write_rs  reg1, reg2 [,START]
-;
-;       Ex: cp_write_rs  lr2,lr5       Transfers the contents of lr2 to
-;                                      the most-significant half of Am29027
-;                                      register R, and the contents of lr5
-;                                      to the most-significant half of Am29027
-;                                      register S.
-;
-;           cp_write_rs  lr2,lr5,START Transfers the contents of lr2 to
-;                                      the most-significant half of Am29027
-;                                      register R, and the contents of lr5
-;                                      to the most-significant half of Am29027
-;                                      register S; a new operation is started
-;                                      once the transfer is complete.
-;
-;
-;
-;============================================================================
-;
- .macro cp_write_rs,p1,p2,p3
-;
-;
-   .if $narg<=1
-     .err
-     .print "cp_write_rs: missing parameter(s)"
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-     .ifeqs "@p2@","START"
-       .err
-       .print "cp_write_rs: bad parameter list"
-     .else
-       store 1,CP_WRITE_RS,p1,p2
-     .endif
-     .exitm
-   .endif
-;
-;
-   .if $narg==3
-     .ifeqs "@p3@","START"
-       store 1,CP_WRITE_RS|CP_START,p1,p2
-     .else
-       .err
-       .print "cp_write_rs: bad parameter list"
-     .endif
-     .exitm
-   .endif
-;
-;
-   .if $narg>=4
-     .err
-     .print "cp_write_rs: too many parameters"
-     .exitm
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_prec
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers a word to the Am29027 precision register
-;
-;  PARAMETERS:
-;    reg      - the Am29000 g.p. register containing the word to be
-;               transferred to the Am29027 precision register
-;
-;  USAGE:
-;
-;    cp_write_prec  reg
-;
-;       Ex: cp_write_prec  lr2         Transfers the contents of lr2 to
-;                                      the Am29027 precision register.
-;
-;
-;============================================================================
-;
- .macro cp_write_prec,p1
-;
-;
-   .if $narg!=1
-     .err
-     .print "cp_write_prec: bad parameter list"
-   .else
-     store 1,CP_WRITE_PREC,p1,0
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_status
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers a word to the Am29027 precision register
-;
-;  PARAMETERS:
-;    reg        - the Am29000 g.p. register containing the word to be
-;                 transferred to the Am29027 status register
-;
-;    RESTORE    - indicates that this is the last step of a state restoration
-;                 sequence (flow-through mode only)
-;
-;    INVALIDATE - indicates that the current contents of the ALU pipeline
-;                 register are to be invalidated (pipeline mode only)
-;
-;  USAGE:
-;
-;    cp_write_status  reg [,RESTORE|INVALIDATE]
-;
-;       Ex: cp_write_status  lr2            Transfers the contents of lr2 to
-;                                           the Am29027 status register.
-;
-;
-;           cp_write_status  lr2,RESTORE    Transfers the contents of lr2 to
-;                                           the Am29027 status register, and
-;                                           completes the state restore
-;                                           sequence
-;
-;           cp_write_status  lr2,INVALIDATE Transfers the contents of lr2 to
-;                                           the Am29027 status register, and
-;                                           invalidates the contents of the
-;                                           ALU pipeline.
-;
-;
-;============================================================================
-;
- .macro cp_write_status,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_write_status: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     store 1,CP_WRITE_STATUS,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","RESTORE"
-       store 1,CP_WRITE_STATUS|CP_START,p1,0
-       .exitm
-     .endif
-;
-     .ifeqs "@p2@","INVALIDATE"
-       store 1,CP_WRITE_STATUS|CP_START,p1,0
-       .exitm
-     .endif
-;
-     .err
-     .print "cp_write_status: bad parameter list"
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg >=3
-     .err
-     .print "cp_write_status: too many parameters"
-     .exitm
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_write_inst
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 16, 1988
-;
-;  FUNCTION:   Transfers an instruction word to the Am29027 instruction
-;              register
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register containing the word to be
-;              transferred to the Am29027 instruction register
-;
-;    START   - indicates that a new Am29027 operation is to be started
-;              once the instruction word has been transferred
-;
-;  USAGE:
-;
-;    cp_write_inst  reg [,START]
-;
-;       Ex: cp_write_inst  lr2            Transfers the contents of lr2 to
-;                                         the Am29027 instruction register.
-;
-;
-;           cp_write_inst  lr2,START      Transfers the contents of lr2 to
-;                                         the Am29027 status register; a
-;                                         new operation is started once the
-;                                         transfer is complete.
-;
-;
-;============================================================================
-;
- .macro cp_write_inst,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_write_inst: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     store 1,CP_WRITE_INST,p1,p1
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","START"
-       store 1,CP_WRITE_INST|CP_START,p1,p1
-     .else
-       .err
-       .print "cp_write_inst: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg >=3
-     .err
-     .print "cp_write_inst: too many parameters"
-     .exitm
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_advance_temps
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:   Transfers the contents of Am29027 registers R-Temp, S-Temp,
-;              and I-Temp to register R, register S, and the instruction
-;              register, respectively.
-;
-;  PARAMETERS: none
-;
-;  USAGE:
-;
-;    cp_advance_temps
-;
-;
-;
-;============================================================================
-;
- .macro cp_advance_temps
-;
-;
-   .if $narg!=0
-     .err
-     .print "cp_advance_temp: takes no parameters"
-   .else
-     store 1,CP_ADV_TEMPS,gr1,0 ; use gr1 because it's never protected
-   .endif
-;
- .endm
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME:  cp_write_mode
-;
-;  WRITTEN BY:  Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:    Transfers a 64-bit mode specification to the Am29027 mode
-;               register
-;
-;  PARAMETERS:
-;    reg      - the Am29000 g.p. register containing the 32 MSBs of the
-;               64-bit mode specification to be transferred.
-;
-;    LSB_reg  - the Am29000 g.p. register containing the 32 LSBs of the
-;               64-bit mode specification to be transferred.
-;
-;  USAGE:
-;
-;    cp_write_mode  reg [,LSB_reg]
-;
-;    Either of two forms is acceptable:
-;
-;               cp_write_mode   reg
-;          or   cp_write_mode   reg, LSB_reg
-;
-;       If LSB_reg is omitted, the LSBs are taken from the next g.p.
-;       register.
-;
-;       Ex:     cp_write_mode  lr2     Transfers the contents of lr2 to
-;                                      the most-significant half of the Am29027
-;                                      mode register, and the contents of lr3
-;                                      to the least-significant half.
-;
-;               cp_write_mode  lr2,lr5 Transfers the contents of lr2 to
-;                                      the most-significant half of the Am29027
-;                                      mode register, and the contents of lr5
-;                                      to the least-significant half.
-;
-;
-;
-;============================================================================
-;
- .macro cp_write_mode,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_write_mode: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     store 1,CP_WRITE_MODE,%%((&p1)+1),p1
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-     store 1,CP_WRITE_MODE,p2,p1
-     .exitm
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_write_mode: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_dp
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:   Transfers the current Am29027 double-precison floating-point
-;              result to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the 32 MSBs of the
-;              current Am29027 result are to be written.
-;
-;    LSB_reg - the Am29000 g.p. register into which the 32 LSBs of the
-;              current Am29027 result are to be written.
-;
-;    NO_ERR  - indicates that exception reporting is to be suppressed for this
-;              transfer.
-;
-;  USAGE:
-;
-;    cp_read_dp  reg [,LSB_reg] [,START]
-;
-;    Either of two forms is acceptable:
-;
-;               cp_read_dp   reg
-;          or   cp_read_dp   reg, LSB_reg
-;
-;     If LSB_reg is omitted, the LSBs are written to the next g.p. register.
-;
-;       Ex:     cp_read_dp   lr2     Transfers the 32 MSBs of the current
-;                                    Am29027 result to lr2, and the 32 LSBs
-;                                    to lr3.
-;
-;               cp_read_dp   lr2,lr5 Transfers the 32 MSBs of the current
-;                                    Am29027 result to lr2, and the 32 LSBs
-;                                    to lr5.
-;
-;    Exception reporting can be suppressed by appending NO_ERR to either
-;    of the above, e.g.:
-;
-;               cp_read_dp   lr2,NO_ERR
-;               cp_read_dp   lr2,lr5,NO_ERR
-;
-;
-;============================================================================
-;
- .macro cp_read_dp,p1,p2,p3
-;
-   .if $narg==0
-     .err
-     .print "cp_read_dp: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_READ_LSBS,%%((&p1)+1),0
-     load 1,CP_READ_MSBS,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","NO_ERR"
-       load 1,CP_READ_LSBS|CP_NO_ERR,%%((&p1)+1),0
-       load 1,CP_READ_MSBS|CP_NO_ERR,p1,0
-       .exitm
-     .endif
-;
-     load 1,CP_READ_LSBS,p2,0
-     load 1,CP_READ_MSBS,p1,0
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg==3
-;
-     .ifeqs "@p3@","NO_ERR"
-       load 1,CP_READ_LSBS|CP_NO_ERR,p2,0
-       load 1,CP_READ_MSBS|CP_NO_ERR,p1,0
-     .else
-       .err
-       .print "cp_read_dp: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=4
-     .err
-     .print "cp_read_dp: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_sp
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:   Transfers the current Am29027 single-precison floating-point
-;              result to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the current Am29027
-;              result is to be written.
-;
-;    NO_ERR  - indicates that exception reporting is to be suppressed for this
-;              transfer.
-;
-;  USAGE:
-;
-;    cp_read_sp  reg [,START]
-;
-;       Ex:     cp_read_sp   lr2        Transfers the current Am29027 result
-;                                       to lr2.
-;
-;               cp_read_sp   lr2,NO_ERR Transfers the current Am29027 result
-;                                       to lr2, and suppresses exception
-;                                       reporting for this transfer.
-;
-;
-;============================================================================
-;
- .macro cp_read_sp,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_read_sp: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_READ_MSBS,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","NO_ERR"
-       load 1,CP_READ_MSBS|CP_NO_ERR,p1,0
-     .else
-       .err
-       .print "cp_read_sp: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_read_sp: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_int
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:   Transfers the current Am29027 integer result to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the current Am29027
-;              result is to be written.
-;
-;    NO_ERR  - indicates that exception reporting is to be suppressed for this
-;              transfer.
-;
-;  USAGE:
-;
-;    cp_read_int  reg [,START]
-;
-;       Ex:     cp_read_int  lr2        Transfers the current Am29027 result
-;                                       to lr2.
-;
-;               cp_read_int  lr2,NO_ERR Transfers the current Am29027 result
-;                                       to lr2, and suppresses exception
-;                                       reporting for this transfer.
-;
-;
-;============================================================================
-;
- .macro cp_read_int,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_read_int: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_READ_LSBS,p1,0
-     nop                    ; leave a cycle for the MSBs to come out
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","NO_ERR"
-       load 1,CP_READ_LSBS|CP_NO_ERR,p1,0
-       nop                    ; leave a cycle for the MSBs to come out
-     .else
-       .err
-       .print "cp_read_int: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_read_int: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_flags
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 17, 1988
-;
-;  FUNCTION:   Transfers the contents of the Am29027 flag register
-;              to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the current Am29027
-;              flag register contents are to be written.
-;
-;    NO_ERR  - indicates that exception reporting is to be suppressed for this
-;              transfer.
-;
-;  USAGE:
-;
-;    cp_read_flags  reg [,START]
-;
-;       Ex:     cp_read_flags  lr2        Transfers the Am29027 flag register
-;                                         contents to lr2.
-;
-;               cp_read_flags  lr2,NO_ERR Transfers the Am29027 flag register
-;                                         contents to lr2, and suppresses
-;                                         exception reporting for this
-;                                         transfer.
-;
-;
-;============================================================================
-;
- .macro cp_read_flags,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_read_flags: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_READ_FLAGS,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","NO_ERR"
-       load 1,CP_READ_FLAGS|CP_NO_ERR,p1,0
-     .else
-       .err
-       .print "cp_read_flags: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_read_flags: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_status
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 18, 1988
-;
-;  FUNCTION:   Transfers the contents of the Am29027 status register
-;              to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the current Am29027
-;              status register contents are to be written.
-;
-;    NO_ERR  - indicates that exception reporting is to be suppressed for this
-;              transfer.
-;
-;  USAGE:
-;
-;    cp_read_status  reg [,START]
-;
-;       Ex:     cp_read_status  lr2        Transfers the Am29027 status register
-;                                          contents to lr2.
-;
-;               cp_read_status  lr2,NO_ERR Transfers the Am29027 status register
-;                                          contents to lr2, and suppresses
-;                                          exception reporting for this
-;                                          transfer.
-;
-;
-;============================================================================
-;
- .macro cp_read_status,p1,p2
-;
-   .if $narg==0
-     .err
-     .print "cp_read_status: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_READ_STATUS,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg==2
-;
-     .ifeqs "@p2@","NO_ERR"
-       load 1,CP_READ_STATUS|CP_NO_ERR,p1,0
-     .else
-       .err
-       .print "cp_read_status: bad parameter list"
-     .endif
-     .exitm
-;
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_read_status: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_read_state_wd
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 18, 1988
-;
-;  FUNCTION:   Transfers the next Am29027 state word to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the Am29000 g.p. register into which the next Am29027
-;              state word contents are to be written.
-;
-;  USAGE:
-;
-;    cp_read_state_wd  reg
-;
-;       Ex:     cp_read_state_wd  lr2  Transfers the next Am29027 state word
-;                                      to lr2.
-;
-;============================================================================
-;
- .macro cp_read_state_wd,p1
-;
-   .if $narg==0
-     .err
-     .print "cp_read_state_wd: missing parameter"
-   .endif
-;
-;
-   .if $narg==1
-     load 1,CP_SAVE_STATE,p1,0
-     .exitm
-   .endif
-;
-;
-   .if $narg>=2
-     .err
-     .print "cp_read_state_wd: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_save_state
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 18, 1988
-;
-;  FUNCTION:   Transfers the current Am29027 state to the Am29000
-;
-;  PARAMETERS:
-;    reg     - the first of 30 Am29000 g.p. registers in which Am29027 state
-;              is saved.
-;
-;  USAGE:
-;
-;    cp_save_state  reg
-;
-;    This macro transfers the current Am29027 state to a block of 30 Am29000
-;    registers.  State is stored in the following order:
-;
-;              reg      instruction register
-;              reg+1    I-Temp
-;              reg+2    R MSBs
-;              reg+3    R LSBs
-;              reg+4    S MSBs
-;              reg+5    S LSBs
-;              reg+6    R-Temp MSBs
-;              reg+7    R-Temp LSBs
-;              reg+8    S-Temp MSBs
-;              reg+9    S-Temp LSBs
-;              reg+10   status
-;              reg+11   precision
-;              reg+12   RF0 MSBs
-;              reg+13   RF0 LSBs
-;                .         .
-;                .         .
-;                .         .
-;              reg+26   RF7 MSBs
-;              reg+27   RF7 LSBs
-;              reg+28   mode MSBs
-;              reg+29   mode LSBs
-;
-;
-;       Ex:     cp_save_state  lr2     Transfers the current Am29027 state to
-;                                      the Am29000, starting at lr2.
-;
-;  NOTES:
-;       1) This macro stores all 64-bit quantities in "big-endian" order,
-;          i.e. MSBs first.  For example, the 32 MSBs of register R are
-;          stored in reg+2, and the 32 LSBs are stored in reg+3.  The Am29027
-;          transfers these quantites in "little-endian" order; the macro
-;          is responsible for swapping MS and LS words.
-;
-;============================================================================
-;
- .macro cp_save_state,p1
-;
-   .if $narg==0
-     .err
-     .print "cp_save_state: missing parameter"
-   .endif
-;
-;
-   .if $narg==1
-     cp_read_sp p1,NO_ERR
-                                    ;guarantee that we're at beginning of
-                                    ; save state sequence
-     cp_read_state_wd %%((&p1)+ 0)  ; instruction
-     cp_read_state_wd %%((&p1)+ 1)  ; I-Temp
-     cp_read_state_wd %%((&p1)+ 3)  ; R MSBs
-     cp_read_state_wd %%((&p1)+ 2)  ; R LSBs
-     cp_read_state_wd %%((&p1)+ 5)  ; S MSBs
-     cp_read_state_wd %%((&p1)+ 4)  ; S LSBs
-     cp_read_state_wd %%((&p1)+ 7)  ; R-Temp MSBs
-     cp_read_state_wd %%((&p1)+ 6)  ; R-Temp LSBs
-     cp_read_state_wd %%((&p1)+ 9)  ; S-Temp MSBs
-     cp_read_state_wd %%((&p1)+ 8)  ; S-Temp LSBs
-     cp_read_state_wd %%((&p1)+10)  ; status
-     cp_read_state_wd %%((&p1)+11)  ; precision
-     cp_read_state_wd %%((&p1)+13)  ; RF0 MSBs
-     cp_read_state_wd %%((&p1)+12)  ; RF0 LSBs
-     cp_read_state_wd %%((&p1)+15)  ; RF1 MSBs
-     cp_read_state_wd %%((&p1)+14)  ; RF1 LSBs
-     cp_read_state_wd %%((&p1)+17)  ; RF2 MSBs
-     cp_read_state_wd %%((&p1)+16)  ; RF2 LSBs
-     cp_read_state_wd %%((&p1)+19)  ; RF3 MSBs
-     cp_read_state_wd %%((&p1)+18)  ; RF3 LSBs
-     cp_read_state_wd %%((&p1)+21)  ; RF4 MSBs
-     cp_read_state_wd %%((&p1)+20)  ; RF4 LSBs
-     cp_read_state_wd %%((&p1)+23)  ; RF5 MSBs
-     cp_read_state_wd %%((&p1)+22)  ; RF5 LSBs
-     cp_read_state_wd %%((&p1)+25)  ; RF6 MSBs
-     cp_read_state_wd %%((&p1)+24)  ; RF6 LSBs
-     cp_read_state_wd %%((&p1)+27)  ; RF7 MSBs
-     cp_read_state_wd %%((&p1)+26)  ; RF7 LSBs
-     cp_read_state_wd %%((&p1)+29)  ; mode MSBs
-     cp_read_state_wd %%((&p1)+28)  ; mode LSBs
-     .exitm
-   .endif
-;
-;
-   .if $narg>=2
-     .err
-     .print "cp_save_state: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_restore_state
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 18, 1988
-;
-;  FUNCTION:   Restores Am29027 state
-;
-;  PARAMETERS:
-;    reg     - the first of 30 Am29000 g.p. registers containing Am29027
-;              state.
-;
-;    temp    - a scratch register used by cp_restore_state
-;
-;  USAGE:
-;
-;    cp_restore_state  reg,temp
-;
-;    This macro restores Am29027 state by transferring 30 words to the
-;    Am29027; these words are taken from a block of Am29000 g.p. registers
-;    starting at "reg."  The words are assumed to be stored in the following
-;    order:
-;
-;              reg      instruction register
-;              reg+1    I-Temp
-;              reg+2    R MSBs
-;              reg+3    R LSBs
-;              reg+4    S MSBs
-;              reg+5    S LSBs
-;              reg+6    R-Temp MSBs
-;              reg+7    R-Temp LSBs
-;              reg+8    S-Temp MSBs
-;              reg+9    S-Temp LSBs
-;              reg+10   status
-;              reg+11   precision
-;              reg+12   RF0 MSBs
-;              reg+13   RF0 LSBs
-;                .         .
-;                .         .
-;                .         .
-;              reg+26   RF7 MSBs
-;              reg+27   RF7 LSBs
-;              reg+28   mode MSBs
-;              reg+29   mode LSBs
-;
-;
-;       Ex:     cp_restore_state  lr2,gr70  Restores Am29027 state by
-;                                           transferring a block of 30 words
-;                                           that begins at lr2.  Register gr70
-;                                           is used as scratch storage by this
-;                                           macro.
-;
-;
-;============================================================================
-;
- .macro cp_restore_state,p1,p2
-;
-   .if $narg<=1
-     .err
-     .print "cp_restore_state: missing parameter(s)"
-   .endif
-;
-;
-   .if $narg==2
-
-     const p2,0                     ;clear the status register
-     cp_write_status p2
-;
-     cp_write_mode %%((&p1)+28)     ;restore the mode register
-;
-     const  p2,0x80000018           ; restore RF0
-     consth p2,0x80000018
-     cp_write_inst p2
-     cp_write_r %%((&p1)+12),START
-;
-     consth p2,0x90000018           ; restore RF1
-     cp_write_inst p2
-     cp_write_r %%((&p1)+14),START
-;
-     consth p2,0xA0000018           ; restore RF2
-     cp_write_inst p2
-     cp_write_r %%((&p1)+16),START
-;
-     consth p2,0xB0000018           ; restore RF3
-     cp_write_inst p2
-     cp_write_r %%((&p1)+18),START
-;
-     consth p2,0xC0000018           ; restore RF4
-     cp_write_inst p2
-     cp_write_r %%((&p1)+20),START
-;
-     consth p2,0xD0000018           ; restore RF5
-     cp_write_inst p2
-     cp_write_r %%((&p1)+22),START
-;
-     consth p2,0xE0000018           ; restore RF6
-     cp_write_inst p2
-     cp_write_r %%((&p1)+24),START
-;
-     consth p2,0xF0000018           ; restore RF7
-     cp_write_inst p2
-     cp_write_r %%((&p1)+26),START
-;
-     cp_read_sp p2                  ; do a dummy read, to guarantee that
-                                    ; the last operation is complete
-;
-     cp_write_prec %%((&p1)+11)     ; restore precision
-;
-     cp_write_r %%((&p1)+2)         ; restore R
-     cp_write_s %%((&p1)+4)         ; restore S
-     cp_write_inst %%((&p1)+0)      ; restore instruction
-     cp_advance_temps               ; move R,S, and inst. to working registers
-;
-     cp_write_r %%((&p1)+6)         ; restore R-Temp
-     cp_write_s %%((&p1)+8)         ; restore S-Temp
-     cp_write_inst %%((&p1)+1)      ; restore I-Temp
-;
-; restore the status register, retime last operation
-;
-     cp_write_status %%((&p1)+10),RESTORE
-;
-     .exitm
-   .endif
-;
-;
-   .if $narg>=3
-     .err
-     .print "cp_restore_state: too many parameters"
-   .endif
-;
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_build_inst
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 24, 1988
-;                    :  January 4, 1989 Rich Parker
-;
-;  FUNCTION:   Builds a 32-bit Am29027 instruction in an Am29000 g.p.
-;              register.
-;
-;  PARAMETERS:
-;    reg       - the Am29000 g.p. register into which the instruction word
-;                is to be written
-;
-;    op_code   - mnemonic specifying the operation to be performed
-;                (e.g. FADD, P_TIMES_Q)
-;
-;    precision - precision specification for destination, source operands:
-;                  D_S - double-prec. result, single-prec. input(s)
-;                  D_D - double-prec. result, double-prec. input(s)
-;                  S_S - single-prec. result, single-prec. input(s)
-;                  S_D - single-prec. result, double-prec. input(s)
-;
-;    dest      - destination for the operation result:
-;                  RF0 - store result in Am29027 register file location RF0
-;                  RF1 - store result in Am29027 register file location RF1
-;                  RF2 - store result in Am29027 register file location RF2
-;                  RF3 - store result in Am29027 register file location RF3
-;                  RF4 - store result in Am29027 register file location RF4
-;                  RF5 - store result in Am29027 register file location RF5
-;                  RF6 - store result in Am29027 register file location RF6
-;                  RF7 - store result in Am29027 register file location RF7
-;                  GP  - result is to be stored in an Am29000 g.p. register
-;                          with a read_dp, read_sp, or read_int macro.
-;
-;    source1,
-;    source2,
-;    source3   - source operand specifications:
-;                  R    - take source from Am29027 register R
-;                  S    - take source from Am29027 register S
-;                  RF0  - take source from Am29027 register file location RF0
-;                  RF1  - take source from Am29027 register file location RF1
-;                  RF2  - take source from Am29027 register file location RF2
-;                  RF3  - take source from Am29027 register file location RF3
-;                  RF4  - take source from Am29027 register file location RF4
-;                  RF5  - take source from Am29027 register file location RF5
-;                  RF6  - take source from Am29027 register file location RF6
-;                  RF7  - take source from Am29027 register file location RF7
-;                  0    - source is 0
-;                  ONE_HALF - source is constant .5 (f.p. operations only)
-;                  IMINUS1 - source is constant -1 (integer operations only)
-;                  1    - source is constant 1
-;                  2    - source is constant 2
-;                  3    - source is constant 3
-;                  PI   - source is constant pi (f.p. operations only)
-;                  IMINUSMAX - source is -(2**63) (integer operations only)
-;
-;
-;  USAGE:
-;
-;    cp_build_inst  reg,op_code,[precision,]dest,source1[,source2][,source3]
-;
-;    Op-codes fall into two categories: those that correspond to Am29000
-;    floating-point op-codes, and for which the precision is implicit (e.g.
-;    FADD, DMUL); and those that correspond to Am29027 base operations
-;    (e.g. P_PLUS_T, P_TIMES_Q), and which require an explicit precision
-;    specification.
-;
-;    Every operation specified must have a destination; if the operation
-;    does not write a result to the Am29027 register file, destination GP
-;    must be specified.  The number of source operands specified must agree
-;    with the number of source operands required by the operation specified.
-;
-;    Ex:
-;
-;       cp_build_inst lr2,FADD,RF7,R,S
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                            RF7 <- R + S
-;                                         where R, S, and RF7 are single-
-;                                         precision f.p. operands.  The
-;                                         instruction word is placed in lr2.
-;
-;       cp_build_inst gr119,DMUL,GP,R,ONE_HALF
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                                R * .5
-;                                         where R, .5, and the result
-;                                         are double-precision f.p. operands.
-;                                         The result is not written to the
-;                                         Am29027 register file.  The
-;                                         instruction word is written to
-;                                         gr119.
-;
-;
-;       cp_build_inst lr3,MIN_P_AND_T,S_D,RF7,R,S
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                            RF7 <- smaller of(R,S)
-;                                         where R and S are double-precision
-;                                         f.p. operands, and RF7 is a single-
-;                                         precison f.p. operand.  The
-;                                         instruction word is written to
-;                                         lr3.
-;
-;
-;       cp_build_inst gr97,I_P_TIMES_Q,S_S,GP,R,2
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                                R * 2
-;                                         where R, .5, and the result
-;                                         are single-precision integer operands.
-;                                         The result is not written to the
-;                                         Am29027 register file.  The
-;                                         instruction word is written to
-;                                         gr97
-;
-;
-;       cp_build_inst lr7,ABS_P,D_D,RF6,S
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                                RF6 <- |S|
-;                                         where S and RF7 are double-precision
-;                                         f.p. operands.  The instruction
-;                                         word is written to gr7.
-;
-;
-;       cp_build_inst gr127,PQ_PLUS_T,D_D,RF6,R,S,RF6
-;                                         Builds an instruction word to
-;                                         perform the operation:
-;                                           RF6 <- (R * S) + RF6
-;                                         where R, S and the result are
-;                                         double-precision f.p. operands.
-;                                         The instruction word is written
-;                                         to gr127.
-;
-;
-;
-;============================================================================
-;
- .macro cp_build_inst,p1,p2,p3,p4,p5,p6,p7
-;
-   .if $narg<=3
-     .err
-     .print "cp_build_inst: missing parameter(s)"
-     .exitm
-   .endif
-;
-; classify operation type
-;
-   .set _cp_op_type,255
-
-   _cp_set_op_params  p2,FADD,1,5,4,0,5
-   _cp_set_op_params  p2,DADD,1,5,4,0,5
-   _cp_set_op_params  p2,FSUB,1,5,4,0,5
-   _cp_set_op_params  p2,DSUB,1,5,4,0,5
-   _cp_set_op_params  p2,FMUL,1,5,4,5,0
-   _cp_set_op_params  p2,DMUL,1,5,4,5,0
-   _cp_set_op_params  p2,FEQ,1,5,4,0,5
-   _cp_set_op_params  p2,DEQ,1,5,4,0,5
-   _cp_set_op_params  p2,FGE,1,5,4,0,5
-   _cp_set_op_params  p2,DGE,1,5,4,0,5
-   _cp_set_op_params  p2,FGT,1,5,4,0,5
-   _cp_set_op_params  p2,DGT,1,5,4,0,5
-   _cp_set_op_params  p2,CONVERT_I_TO_F,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_I_TO_D,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_F_TO_I,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_D_TO_I,1,4,0,0,4
-;
-; The next two lines were corrected on 1-4-89, Rich Parker
-;
-   _cp_set_op_params  p2,CONVERT_F_TO_D,1,4,4,0,0
-   _cp_set_op_params  p2,CONVERT_D_TO_F,1,4,4,0,0
-;
-   _cp_set_op_params  p2,PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_PLUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,MINUSP_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,ABS_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,LIMIT_P_TO_MAGT,0,6,5,0,6
-   _cp_set_op_params  p2,CONVERT_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,PQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,PQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_MINUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ROUND_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,RECIPROCAL_OF_P,0,5,5,0,0
-   _cp_set_op_params  p2,CONVERT_T_TO_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,CONVERT_T_FROM_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,I_PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,I_MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,I_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5
-   _cp_set_op_params  p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,I_P_OR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_XOR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_NOT_T,0,5,0,0,5
-   _cp_set_op_params  p2,I_LSHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_ASHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6
-   _cp_set_op_params  p2,MOVE_P,0,5,5,0,0
-;
-;
-; if we couldn't find the op_code, flag an error
-;
-    .if _cp_op_type>=2
-      .err
-      .print "cp_build_inst: invalid Am29027 instruction mnemonic"
-      .exitm
-    .endif
-;
-; if number of parameters is incorrect, flag error
-;
-    .if $narg!=_cp_no_params
-      .err
-      .print "cp_build_inst: incorrect number of parameters"
-      .exitm
-    .endif
-;
-; find correct value for precision field, if appropriate
-;
-    .set _cp_prec_field,0 ; ** CORRECTION (1/4/89 ROP)
-    .if _cp_op_type==0    ; need to look for precision
-      .set _cp_found_precision,0
-      .ifeqs "@p3@","D_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","D_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .if _cp_found_precision==0
-        .err
-        .print "cp_build_inst: missing precision field"
-        .exitm
-      .endif
-    .endif
-;
-; find value for destination field
-;
-    .if _cp_op_type==0
-      .set _cp_dest_field_val,CP_DEST_EQ_@p4
-    .else
-      .set _cp_dest_field_val,CP_DEST_EQ_@p3
-    .endif
-;
-; find correct value for p select field
-;
-     .if _cp_p_paramno==0
-       .set _cp_p_field_val,0x00000000
-     .endif
-     .if _cp_p_paramno==4
-       .set _cp_p_field_val,CP_P_EQ_@p4
-     .endif
-     .if _cp_p_paramno==5
-       .set _cp_p_field_val,CP_P_EQ_@p5
-     .endif
-     .if _cp_p_paramno==6
-       .set _cp_p_field_val,CP_P_EQ_@p6
-     .endif
-     .if _cp_p_paramno==7
-       .set _cp_p_field_val,CP_P_EQ_@p7
-     .endif
-     .ifeqs "@p2@","I_NOT_T"
-       .set _cp_p_field_val,CP_P_EQ_IMINUS1
-     .endif
-;
-; find correct value for q select field
-;
-     .if _cp_q_paramno==0
-       .set _cp_q_field_val,0x00000000
-     .endif
-     .if _cp_q_paramno==4
-       .set _cp_q_field_val,CP_Q_EQ_@p4
-     .endif
-     .if _cp_q_paramno==5
-       .set _cp_q_field_val,CP_Q_EQ_@p5
-     .endif
-     .if _cp_q_paramno==6
-       .set _cp_q_field_val,CP_Q_EQ_@p6
-     .endif
-     .if _cp_q_paramno==7
-       .set _cp_q_field_val,CP_Q_EQ_@p7
-     .endif
-;
-; find correct value for t select field
-;
-     .if _cp_t_paramno==0
-       .set _cp_t_field_val,0x00000000
-     .endif
-     .if _cp_t_paramno==4
-       .set _cp_t_field_val,CP_T_EQ_@p4
-     .endif
-     .if _cp_t_paramno==5
-       .set _cp_t_field_val,CP_T_EQ_@p5
-     .endif
-     .if _cp_t_paramno==6
-       .set _cp_t_field_val,CP_T_EQ_@p6
-     .endif
-     .if _cp_t_paramno==7
-       .set _cp_t_field_val,CP_T_EQ_@p7
-     .endif
-;
-;
-     .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_p_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_q_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_t_field_val
-
-     const  p1,_cp_inst_word
-     consth p1,_cp_inst_word
-;
- .endm
-;
-;
-;
- .macro _cp_set_op_params,par1,par2,par3,par4,par5,par6,par7
-   .ifeqs "@par1@","@par2@"
-     .set _cp_op_type,par3
-     .set _cp_no_params,par4
-     .set _cp_p_paramno,par5
-     .set _cp_q_paramno,par6
-     .set _cp_t_paramno,par7
-    .endif
- .endm
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_build_inst_h
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 24, 1988
-;                    :  January 4, 1989 Rich Parker
-;
-;  FUNCTION:   Builds a 16 MSBs of a 32-bit Am29027 instruction in an
-;              Am29000 g.p. register.
-;
-;  PARAMETERS:
-;    reg       - the Am29000 g.p. register into which the instruction word
-;                is to be written
-;
-;    op_code   - mnemonic specifying the operation to be performed
-;                (e.g. FADD, P_TIMES_Q)
-;
-;    precision - precision specification for destination, source operands:
-;                  D_S - double-prec. result, single-prec. input(s)
-;                  D_D - double-prec. result, double-prec. input(s)
-;                  S_S - single-prec. result, single-prec. input(s)
-;                  S_D - single-prec. result, double-prec. input(s)
-;
-;    dest      - destination for the operation result:
-;                  RF0 - store result in Am29027 register file location RF0
-;                  RF1 - store result in Am29027 register file location RF1
-;                  RF2 - store result in Am29027 register file location RF2
-;                  RF3 - store result in Am29027 register file location RF3
-;                  RF4 - store result in Am29027 register file location RF4
-;                  RF5 - store result in Am29027 register file location RF5
-;                  RF6 - store result in Am29027 register file location RF6
-;                  RF7 - store result in Am29027 register file location RF7
-;                  GP  - result is to be stored in an Am29000 g.p. register
-;                          with a read_dp, read_sp, or read_int macro.
-;
-;    source1,
-;    source2,
-;    source3   - source operand specifications:
-;                  R    - take source from Am29027 register R
-;                  S    - take source from Am29027 register S
-;                  RF0  - take source from Am29027 register file location RF0
-;                  RF1  - take source from Am29027 register file location RF1
-;                  RF2  - take source from Am29027 register file location RF2
-;                  RF3  - take source from Am29027 register file location RF3
-;                  RF4  - take source from Am29027 register file location RF4
-;                  RF5  - take source from Am29027 register file location RF5
-;                  RF6  - take source from Am29027 register file location RF6
-;                  RF7  - take source from Am29027 register file location RF7
-;                  0    - source is 0
-;                  ONE_HALF - source is constant .5 (f.p. operations only)
-;                  IMINUS1 - source is constant -1 (integer operations only)
-;                  1    - source is constant 1
-;                  2    - source is constant 2
-;                  3    - source is constant 3
-;                  PI   - source is constant pi (f.p. operations only)
-;                  IMINUSMAX - source is -(2**63) (integer operations only)
-;
-;
-;  USAGE:
-;
-;    cp_build_inst_h reg,op_code,[precision,]dest,source1[,source2][,source3]
-;
-;    This macro is similar to cp_build_inst, but creates only the 16 MSBs
-;    of the 32-bit Am29027 instruction word.  This macro is useful in cases
-;    where the 16 LSBs of instruction word, which specify the operation
-;    to be performed, already exist in an Am29000 g.p. register, but where
-;    the 16 MSBs, which specify operand sources and destination, must be
-;    changed.  In such cases, one Am29000 instruction can be saved by using
-;    cp_build_inst_h instead of cp_build_inst.
-;
-;    Syntax and usage are identical to that of cp_build_inst.
-;
-;    NOTE: This macro references macro _cp_set_op_params, which appears
-;          in the assembly listing for macro _cp_build_inst.
-;
-;
-;
-;
-;============================================================================
-;
- .macro cp_build_inst_h,p1,p2,p3,p4,p5,p6,p7
-;
-   .if $narg<=3
-     .err
-     .print "cp_build_inst_h: missing parameter(s)"
-     .exitm
-   .endif
-;
-; classify operation type
-;
-   .set _cp_op_type,255
-
-   _cp_set_op_params  p2,FADD,1,5,4,0,5
-   _cp_set_op_params  p2,DADD,1,5,4,0,5
-   _cp_set_op_params  p2,FSUB,1,5,4,0,5
-   _cp_set_op_params  p2,DSUB,1,5,4,0,5
-   _cp_set_op_params  p2,FMUL,1,5,4,5,0
-   _cp_set_op_params  p2,DMUL,1,5,4,5,0
-   _cp_set_op_params  p2,FEQ,1,5,4,0,5
-   _cp_set_op_params  p2,DEQ,1,5,4,0,5
-   _cp_set_op_params  p2,FGE,1,5,4,0,5
-   _cp_set_op_params  p2,DGE,1,5,4,0,5
-   _cp_set_op_params  p2,FGT,1,5,4,0,5
-   _cp_set_op_params  p2,DGT,1,5,4,0,5
-   _cp_set_op_params  p2,CONVERT_I_TO_F,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_I_TO_D,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_F_TO_I,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_D_TO_I,1,4,0,0,4
-;
-; The next two lines were corrected on 1-4-89, Rich Parker
-;
-   _cp_set_op_params  p2,CONVERT_F_TO_D,1,4,4,0,0
-   _cp_set_op_params  p2,CONVERT_D_TO_F,1,4,4,0,0
-;
-   _cp_set_op_params  p2,PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_PLUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,MINUSP_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,ABS_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,LIMIT_P_TO_MAGT,0,6,5,0,6
-   _cp_set_op_params  p2,CONVERT_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,PQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,PQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_MINUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ROUND_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,RECIPROCAL_OF_P,0,5,5,0,0
-   _cp_set_op_params  p2,CONVERT_T_TO_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,CONVERT_T_FROM_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,I_PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,I_MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,I_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5
-   _cp_set_op_params  p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,I_P_OR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_XOR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_NOT_T,0,5,0,0,5
-   _cp_set_op_params  p2,I_LSHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_ASHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6
-   _cp_set_op_params  p2,MOVE_P,0,5,5,0,0
-;
-;
-; if we couldn't find the op_code, flag an error
-;
-    .if _cp_op_type>=2
-      .err
-      .print "cp_build_inst_h: invalid Am29027 instruction mnemonic"
-      .exitm
-    .endif
-;
-; if number of parameters is incorrect, flag error
-;
-    .if $narg!=_cp_no_params
-      .err
-      .print "cp_build_inst_h: incorrect number of parameters"
-      .exitm
-    .endif
-;
-; find correct value for precision field, if appropriate
-;
-    .set _cp_prec_field,0 ; ** CORRECTION (1-4-89 Rich Parker)
-    .if _cp_op_type==0    ; need to look for precision
-      .set _cp_found_precision,0
-      .ifeqs "@p3@","D_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","D_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .if _cp_found_precision==0
-        .err
-        .print "cp_build_inst_h: missing precision field"
-        .exitm
-      .endif
-    .endif
-;
-; find value for destination field
-;
-    .if _cp_op_type==0
-      .set _cp_dest_field_val,CP_DEST_EQ_@p4
-    .else
-      .set _cp_dest_field_val,CP_DEST_EQ_@p3
-    .endif
-;
-; find correct value for p select field
-;
-     .if _cp_p_paramno==0
-       .set _cp_p_field_val,0x00000000
-     .endif
-     .if _cp_p_paramno==4
-       .set _cp_p_field_val,CP_P_EQ_@p4
-     .endif
-     .if _cp_p_paramno==5
-       .set _cp_p_field_val,CP_P_EQ_@p5
-     .endif
-     .if _cp_p_paramno==6
-       .set _cp_p_field_val,CP_P_EQ_@p6
-     .endif
-     .if _cp_p_paramno==7
-       .set _cp_p_field_val,CP_P_EQ_@p7
-     .endif
-     .ifeqs "@p2@","I_NOT_T"
-       .set _cp_p_field_val,CP_P_EQ_IMINUS1
-     .endif
-;
-; find correct value for q select field
-;
-     .if _cp_q_paramno==0
-       .set _cp_q_field_val,0x00000000
-     .endif
-     .if _cp_q_paramno==4
-       .set _cp_q_field_val,CP_Q_EQ_@p4
-     .endif
-     .if _cp_q_paramno==5
-       .set _cp_q_field_val,CP_Q_EQ_@p5
-     .endif
-     .if _cp_q_paramno==6
-       .set _cp_q_field_val,CP_Q_EQ_@p6
-     .endif
-     .if _cp_q_paramno==7
-       .set _cp_q_field_val,CP_Q_EQ_@p7
-     .endif
-;
-; find correct value for t select field
-;
-     .if _cp_t_paramno==0
-       .set _cp_t_field_val,0x00000000
-     .endif
-     .if _cp_t_paramno==4
-       .set _cp_t_field_val,CP_T_EQ_@p4
-     .endif
-     .if _cp_t_paramno==5
-       .set _cp_t_field_val,CP_T_EQ_@p5
-     .endif
-     .if _cp_t_paramno==6
-       .set _cp_t_field_val,CP_T_EQ_@p6
-     .endif
-     .if _cp_t_paramno==7
-       .set _cp_t_field_val,CP_T_EQ_@p7
-     .endif
-;
-;
-     .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_p_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_q_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_t_field_val
-;
-     consth p1,_cp_inst_word
-;
- .endm
-;
-;
-;
-;
-;============================================================================
-;  MACRO NAME: cp_build_inst_l
-;
-;  WRITTEN BY: Bob Perlman
-;
-;  MOST RECENT UPDATE:  April 24, 1988
-;                    :  January 4, 1989 Rich Parker
-;
-;  FUNCTION:   Builds a 16 LSBs of a 32-bit Am29027 instruction in an
-;              Am29000 g.p. register; the 16 MSBs of the register are
-;              set to 0..
-;
-;  PARAMETERS:
-;    reg       - the Am29000 g.p. register into which the instruction word
-;                is to be written
-;
-;    op_code   - mnemonic specifying the operation to be performed
-;                (e.g. FADD, P_TIMES_Q)
-;
-;    precision - precision specification for destination, source operands:
-;                  D_S - double-prec. result, single-prec. input(s)
-;                  D_D - double-prec. result, double-prec. input(s)
-;                  S_S - single-prec. result, single-prec. input(s)
-;                  S_D - single-prec. result, double-prec. input(s)
-;
-;    dest      - destination for the operation result:
-;                  RF0 - store result in Am29027 register file location RF0
-;                  RF1 - store result in Am29027 register file location RF1
-;                  RF2 - store result in Am29027 register file location RF2
-;                  RF3 - store result in Am29027 register file location RF3
-;                  RF4 - store result in Am29027 register file location RF4
-;                  RF5 - store result in Am29027 register file location RF5
-;                  RF6 - store result in Am29027 register file location RF6
-;                  RF7 - store result in Am29027 register file location RF7
-;                  GP  - result is to be stored in an Am29000 g.p. register
-;                          with a read_dp, read_sp, or read_int macro.
-;
-;    source1,
-;    source2,
-;    source3   - source operand specifications:
-;                  R    - take source from Am29027 register R
-;                  S    - take source from Am29027 register S
-;                  RF0  - take source from Am29027 register file location RF0
-;                  RF1  - take source from Am29027 register file location RF1
-;                  RF2  - take source from Am29027 register file location RF2
-;                  RF3  - take source from Am29027 register file location RF3
-;                  RF4  - take source from Am29027 register file location RF4
-;                  RF5  - take source from Am29027 register file location RF5
-;                  RF6  - take source from Am29027 register file location RF6
-;                  RF7  - take source from Am29027 register file location RF7
-;                  0    - source is 0
-;                  ONE_HALF - source is constant .5 (f.p. operations only)
-;                  IMINUS1 - source is constant -1 (integer operations only)
-;                  1    - source is constant 1
-;                  2    - source is constant 2
-;                  3    - source is constant 3
-;                  PI   - source is constant pi (f.p. operations only)
-;                  IMINUSMAX - source is -(2**63) (integer operations only)
-;
-;
-;  USAGE:
-;
-;    cp_build_inst_l reg,op_code,[precision,]dest,source1[,source2][,source3]
-;
-;    This macro is similar to cp_build_inst, but creates only the 16 LSBs
-;    of the 32-bit Am29027 instruction word; the 16 MSBs of the target
-;    register are set to 0.  This macro is useful in cases
-;    where it is helpful to specify instruction LSBs and MSBs separately,
-;    to improve instruction scheduling.
-;
-;    Syntax and usage are identical to that of cp_build_inst.
-;
-;    NOTE: This macro references macro _cp_set_op_params, which appears
-;          in the assembly listing for macro _cp_build_inst.
-;
-;
-;============================================================================
-;
- .macro cp_build_inst_l,p1,p2,p3,p4,p5,p6,p7
-;
-   .if $narg<=3
-     .err
-     .print "cp_build_inst_h: missing parameter(s)"
-     .exitm
-   .endif
-;
-; classify operation type
-;
-   .set _cp_op_type,255
-
-   _cp_set_op_params  p2,FADD,1,5,4,0,5
-   _cp_set_op_params  p2,DADD,1,5,4,0,5
-   _cp_set_op_params  p2,FSUB,1,5,4,0,5
-   _cp_set_op_params  p2,DSUB,1,5,4,0,5
-   _cp_set_op_params  p2,FMUL,1,5,4,5,0
-   _cp_set_op_params  p2,DMUL,1,5,4,5,0
-   _cp_set_op_params  p2,FEQ,1,5,4,0,5
-   _cp_set_op_params  p2,DEQ,1,5,4,0,5
-   _cp_set_op_params  p2,FGE,1,5,4,0,5
-   _cp_set_op_params  p2,DGE,1,5,4,0,5
-   _cp_set_op_params  p2,FGT,1,5,4,0,5
-   _cp_set_op_params  p2,DGT,1,5,4,0,5
-   _cp_set_op_params  p2,CONVERT_I_TO_F,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_I_TO_D,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_F_TO_I,1,4,0,0,4
-   _cp_set_op_params  p2,CONVERT_D_TO_I,1,4,0,0,4
-;
-; The next two lines were corrected on 1-4-89, Rich Parker
-;
-   _cp_set_op_params  p2,CONVERT_F_TO_D,1,4,4,0,0
-   _cp_set_op_params  p2,CONVERT_D_TO_F,1,4,4,0,0
-;
-   _cp_set_op_params  p2,PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,MINUSP_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_PLUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,MINUSP_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,ABS_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MAX_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,MIN_ABSP_AND_ABST,0,6,5,0,6
-   _cp_set_op_params  p2,LIMIT_P_TO_MAGT,0,6,5,0,6
-   _cp_set_op_params  p2,CONVERT_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,PQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_PLUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,PQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSPQ_MINUS_T,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ABSPQ_MINUS_ABST,0,7,5,6,7
-   _cp_set_op_params  p2,ROUND_T_TO_INT,0,5,0,0,5
-   _cp_set_op_params  p2,RECIPROCAL_OF_P,0,5,5,0,0
-   _cp_set_op_params  p2,CONVERT_T_TO_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,CONVERT_T_FROM_ALT,0,5,0,0,5
-   _cp_set_op_params  p2,I_PASS_P,0,5,5,0,0
-   _cp_set_op_params  p2,I_MINUSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_ABSP,0,5,5,0,0
-   _cp_set_op_params  p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5
-   _cp_set_op_params  p2,I_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MINUSP_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_PLUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_ABS_P_MINUS_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_TIMES_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_COMPARE_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MAX_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_MIN_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5
-   _cp_set_op_params  p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5
-   _cp_set_op_params  p2,I_P_OR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_AND_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_P_XOR_T,0,6,5,0,6
-   _cp_set_op_params  p2,I_NOT_T,0,5,0,0,5
-   _cp_set_op_params  p2,I_LSHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_ASHIFT_P_BY_Q,0,6,5,6,0
-   _cp_set_op_params  p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6
-   _cp_set_op_params  p2,MOVE_P,0,5,5,0,0
-;
-;
-; if we couldn't find the op_code, flag an error
-;
-    .if _cp_op_type>=2
-      .err
-      .print "cp_build_inst_h: invalid Am29027 instruction mnemonic"
-      .exitm
-    .endif
-;
-; if number of parameters is incorrect, flag error
-;
-    .if $narg!=_cp_no_params
-      .err
-      .print "cp_build_inst_h: incorrect number of parameters"
-      .exitm
-    .endif
-;
-; find correct value for precision field, if appropriate
-;
-    .set _cp_prec_field,0 ; CORRECTION (1-4-89 Rich Parker)
-    .if _cp_op_type==0    ; need to look for precision
-      .set _cp_found_precision,0
-      .ifeqs "@p3@","D_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","D_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_D"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .ifeqs "@p3@","S_S"
-        .set _cp_prec_field,CP_@p3
-        .set _cp_found_precision,1
-      .endif
-      .if _cp_found_precision==0
-        .err
-        .print "cp_build_inst_h: missing precision field"
-        .exitm
-      .endif
-    .endif
-;
-; find value for destination field
-;
-    .if _cp_op_type==0
-      .set _cp_dest_field_val,CP_DEST_EQ_@p4
-    .else
-      .set _cp_dest_field_val,CP_DEST_EQ_@p3
-    .endif
-;
-; find correct value for p select field
-;
-     .if _cp_p_paramno==0
-       .set _cp_p_field_val,0x00000000
-     .endif
-     .if _cp_p_paramno==4
-       .set _cp_p_field_val,CP_P_EQ_@p4
-     .endif
-     .if _cp_p_paramno==5
-       .set _cp_p_field_val,CP_P_EQ_@p5
-     .endif
-     .if _cp_p_paramno==6
-       .set _cp_p_field_val,CP_P_EQ_@p6
-     .endif
-     .if _cp_p_paramno==7
-       .set _cp_p_field_val,CP_P_EQ_@p7
-     .endif
-     .ifeqs "@p2@","I_NOT_T"
-       .set _cp_p_field_val,CP_P_EQ_IMINUS1
-     .endif
-;
-; find correct value for q select field
-;
-     .if _cp_q_paramno==0
-       .set _cp_q_field_val,0x00000000
-     .endif
-     .if _cp_q_paramno==4
-       .set _cp_q_field_val,CP_Q_EQ_@p4
-     .endif
-     .if _cp_q_paramno==5
-       .set _cp_q_field_val,CP_Q_EQ_@p5
-     .endif
-     .if _cp_q_paramno==6
-       .set _cp_q_field_val,CP_Q_EQ_@p6
-     .endif
-     .if _cp_q_paramno==7
-       .set _cp_q_field_val,CP_Q_EQ_@p7
-     .endif
-;
-; find correct value for t select field
-;
-     .if _cp_t_paramno==0
-       .set _cp_t_field_val,0x00000000
-     .endif
-     .if _cp_t_paramno==4
-       .set _cp_t_field_val,CP_T_EQ_@p4
-     .endif
-     .if _cp_t_paramno==5
-       .set _cp_t_field_val,CP_T_EQ_@p5
-     .endif
-     .if _cp_t_paramno==6
-       .set _cp_t_field_val,CP_T_EQ_@p6
-     .endif
-     .if _cp_t_paramno==7
-       .set _cp_t_field_val,CP_T_EQ_@p7
-     .endif
-;
-;
-     .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_p_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_q_field_val
-     .set _cp_inst_word,_cp_inst_word|_cp_t_field_val
-;
-     const p1,_cp_inst_word
-;
- .endm
-;
-; end of file fpsymbol.h
diff --git a/newlib/libc/sys/a29khif/sys/intrinsi.h b/newlib/libc/sys/a29khif/sys/intrinsi.h
deleted file mode 100644
index 1ae3a8b5c..000000000
--- a/newlib/libc/sys/a29khif/sys/intrinsi.h
+++ /dev/null
@@ -1,457 +0,0 @@
-; @(#)intrinsi.h	1.4 90/10/14 20:56:06, Copyright 1988, 1989, 1990 AMD
-; start of file intrinsi.h
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; 
-  .title "QTC Intrinsics Header file"
-;
-;    Floating point library package for AMD 29000 family
-;
-;    Copyright 1988 Advanced Micro Devices, Inc.
-;
-;    All rights reserved
-;
-;    Developed for AMD by Quantitative Technology Corporation
-;                         8700 SW Creekside Place Suite D
-;                         Beaverton OR 97005
-;                         (503) 626-3081
-;
-;    Version information :
-;
-; Revision 1.6  89/06/29  16:08:51  jimh
-; Fixed two bugs regarding compatiblility with the fpsymbol file.  The
-; definitions of ROUND_TO_PLUS/MINUS_INFINITY were reversed.  Set_Rounding
-; _Mode was fixed to set the local copy (29000 resident) of rounding mode
-; in 29027 mode.
-; 
-; 
-; Revision 1.5  89/04/17  11:20:49  jim
-; replaced emfsr and emtsr macro calls with mfsr and mtsr instructions.
-; 
-; Revision 1.4  89/02/24  15:18:04  jimh
-; Added the definitions of FP_ENV_MODE_1_DEFAULT, FP_ENV_MODE_2_DEFAULT, 
-; FP_FLAGS_DEFAULT.
-; Added macro clear_Flags.
-; Changed the operation of set_Invalid_Op_flag, set_Reserved_Op_flag.
-; 
-; Revision 1.3  89/02/01  18:30:12  jimh
-; Changed the way set_Rounding_Mode, extract_Rounding_Mode, set_Invalid_Op_flag
-; and set_Reserved_Op_flag are done.  Changed save_FP_regs.
-; 
-; Revision 1.2  89/01/31  10:01:54  jimh
-; Updated to the new standard.  This includes moving in register 
-; definitions, changing old symbols to reflect those in fpsymbol.h,
-; and changing the include file to smartmac.h.
-; 
-; 
- .include "../traps/fpenv.h"				; RPD 8/21/89
- .include "sys/smartmac.h"
-
-  .equ DOUBLE_EXP_WIDTH, 11
-  .equ DOUBLE_EXTENDED_WIDTH, 56
-
- .equ SIGNED, 0
- .equ UNSIGNED, 1
-
-  .equ ROUND_TO_NEAREST,        0
-  .equ ROUND_TO_MINUS_INFINITY, 1
-  .equ ROUND_TO_PLUS_INFINITY,  2
-  .equ ROUND_TO_ZERO,           3
-  .equ ROUNDING_MODE_POSITION, 14 
-
- .equ FORMAT_INTEGER, 0
- .equ FORMAT_SINGLE,  1
- .equ FORMAT_DOUBLE,  2
-      
- .equ DOUBLE_MSB_MASK,0x00080000
-;
-; The following are definitions used in the smart macro package, defining
-; the 29000 shadow registers for the floating-point register file, and
-; some temporary registers used during the library routines
-;
- .reg FP0,  gr96
- .reg FP1,  gr98
- .reg FP2,  gr100
- .reg FP3,  gr102
- .reg FP4,  gr104
- .reg FP5,  gr106
- .reg FP6,  gr108
- .reg FP7,  gr110
-; 
-; GR60 through GR6F are used to return the value of a function
-;
- .reg rtn0,  gr96
- .reg rtn1,  gr97
- .reg rtn2,  gr98
- .reg rtn3,  gr99
- .reg rtn4,  gr100
- .reg rtn5,  gr101
- .reg rtn6,  gr102
- .reg rtn7,  gr103
- .reg rtn8,  gr104
- .reg rtn9,  gr105
- .reg rtn10, gr106
- .reg rtn11, gr107
- .reg rtn12, gr108
- .reg rtn13, gr109
- .reg rtn14, gr110
- .reg rtn15, gr111
-; 
-; GR74..GR78 (116-120)    -  temporaries
-;
- .reg t0, gr116
- .reg t1, gr117
- .reg t2, gr118
- .reg t3, gr119
- .reg t4, gr120
-; 
-; FP_ENV_MODE_1 and FP_ENV_MODE_2 are based on 64-bit 29027 Mode register,
-; and thus the fpsymbol.h CP_ constants may be used directly.
-; 
-; FP_ENV_MODE_1 (Bits 0-31)
-; 
-;      0-3   - floating-point format select, always 0
-;      4     - Saturate enable
-;      5     - IEEE Affine/Projective mode (ignored by traps code)
-;      6     - IEEE Trap enable
-;      7     - IEEE Sudden underflow / FP Environment Fast Float Select
-;      8-10  - ignored
-;      11    - Integer multiplication signed/unsigned select
-;      12-13 - Integer multiplication format adjust
-;      14-16 - Rounding mode select
-;      17-19 - ignored
-;      20    - Pipeline mode select
-;      21    - ignored
-;      22    - Invalid operation mask bit
-;      23    - Reserved operand mask bit
-;      24    - Overflow mask bit
-;      25    - Underflow mask bit
-;      26    - Inexact result mask bit
-;      27    - Zero mask bit
-;      28-31 - ignored
-; 
-; FP_ENV_MODE_2 (Bits 32-63) [Hardware configuration register, rarely modified]
-; 
-;      32-35 - Pipeline timer count
-;      36-39 - Timer count for multiply-accumulate operation
-;      40-43 - Timer count for save state transaction request
-;      44-63 - ignored
-; 
-; FP_ENV_MODE_1 definitions
-;
-    .set  FP_ENV_MODE_1_DEFAULT,                      CP_PFF_EQ_IEEE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_AFF_EQ_IEEE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_AFFINE_MODE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_IEEE_TRAPS_DISABLED
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_IEEE_GRADUAL_UFLOW_MODE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_UNSIGNED_INT_MPY_MODE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_MF_EQ_LSBS
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_RMS_EQ_NEAREST
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_FLOWTHROUGH_MODE
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_INVALID_OP_EXCP_MASK
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_RESERVED_OP_EXCP_MASK
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_OVERFLOW_EXCP_MASK
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_UNDERFLOW_EXCP_MASK
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_INEXACT_EXCP_MASK
-    .set  FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_ZERO_EXCP_MASK
-;
-; FP_ENV_MODE_2 definitions
-;
-    .set  FP_ENV_MODE_2_DEFAULT,                      CP_PLTC_EQ_6
-    .set  FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_MATC_EQ_9
-    .set  FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_MVTC_EQ_3
-    .set  FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_NORMAL_DRDY_MODE
-    .set  FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_HALT_ON_ERROR_DISABLED
-    .set  FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_EXCP_DISABLED
-;
-; FP_FLAGS_DEFAULT definitions
-;
-    .equ  FP_FLAGS_DEFAULT,         0x00000000 ; No flags set
-;
-;  The following macros are used by transcendentals to access the environment.
-;
-;  MACRO NAME: clear_Flags
-;
-;  FUNCTION:  to clear the flags on entry to a transcendental routine.
-;
-;  INPUT PARAMETERS: reg  - temporary working register
-;                    reg2 - temporary working register
-;
- .macro clear_Flags,reg,reg2
- .endm
-;
-;  MACRO NAME: set_Invalid_Op_flag
-;
-;  FUNCTION:  to set the Invalid operation flag in the floating-point status
-;             register
-;
-;  INPUT PARAMETERS: reg  - temporary working register
-;                    reg2 - 2nd temporary working register
-;
- .macro set_Invalid_Op_flag,reg,reg2
- .endm
-
-;
-;  MACRO NAME: set_Reserved_Op_flag
-;
-;  FUNCTION:  to set the Reserved Op flag in the floating-point status register
-;
-;  INPUT PARAMETERS: reg - temporary working register
-;                    reg2 - 2nd temporary working register
-;
- .macro set_Reserved_Op_flag,reg,reg2
- .endm
-
-;
-;  MACRO NAME: extract_Rounding_Mode
-;
-;  FUNCTION: to extract the Rounding Mode portion of the floating-point
-;            invironment mode register, shift the value to the range of
-;            0-7, and leave it in a register
-;
-;  INPUT PARAMETERS: reg - destination for the mode
-;
- .macro extract_Rounding_Mode,reg
-  .ifdef _29027_MODE
-  .extern __29027Mode
-    const reg,__29027Mode
-    consth reg,__29027Mode
-    load 0,0,reg,reg
-    srl reg,reg,CP_RMS_POSITION
-    and reg,reg,CP_RMS_MASK >> CP_RMS_POSITION
-  .else
-    mfsr reg,FPE
-    and reg,reg,FPE_FPRND_MASK
-    srl reg,reg,FPE_FPRND_POSITION
-  .endif    
- .endm
-
-;
-;  MACRO NAME: set_Rounding_Mode
-;
-;  FUNCTION:  to set the 29027 Rounding Mode to a given value
-;
-;  INPUT PARAMETERS: reg  - working register
-;                    reg2 - second working register
-;                    rounding_mode - value of the rounding mode
-;                      0 - round to nearest
-;                      1 - round to minus infinity
-;                      2 - round to plus infinity
-;                      3 - round to zero
-;
-;  NOTES: rounding_mode value is not checked
-;         29027 Mode register is NOT written by this macro
-;
- .macro set_Rounding_Mode,reg,reg2,mode
-  .ifdef _29027_MODE
-  .extern __29027Mode
-    const reg2,__29027Mode
-    consth reg2,__29027Mode
-    load 0,0,reg,reg2
-    const reg2,CP_RMS_MASK
-    consth reg2,CP_RMS_MASK
-    andn reg,reg,reg2
-    const reg2,mode
-    sll reg2,reg2,CP_RMS_POSITION
-    or reg,reg,reg2
-    const reg2,__29027Mode
-    consth reg2,__29027Mode
-    store 0,0,reg,reg2
-    add reg2,reg2,4
-    load 0,0,reg2,reg2
-    cp_write_mode reg2,reg
-  .else
-    mfsr reg,FPE
-    andn reg,reg,FPE_FPRND_MASK
-    const reg2,mode
-    sll reg2,reg2,FPE_FPRND_POSITION
-    or reg,reg,reg2
-    mtsr FPE,reg
-  .endif
- .endm
-;
-;
-;  NOTE:  The 29027 is the floating point coprocessor for the 29000.
-;         It contains 8 floating point registers FP0 to FP7.  Three of 
-;         these, FP0, FP1, and FP2, are currently designated as scratch,
-;         that is, they will not be preserved across calls.  The other 
-;         five contain values that must be saved whenever they are used 
-;         in code, and restored before the exit of the routine.  The 29027 
-;         registers are tagged with a single bit indicating the precision 
-;         of the current value.   When numbers are read into the 29027,
-;         they are always stored in double precision, so that single 
-;         precision values are converted on input.  Only the MOVE instruction
-;         fails to do this automatic widening.  If the result from calculations
-;         in the 29027 ALU (determined by the result precision bit in the 
-;         instruction word) is to be single precision and the result saved in
-;         an FP reg, the result precision bit from the instruction gets copied
-;         into the precision bit for the register.  If a single precision
-;         SNaN is saved from the 29027, it will be converted to a double
-;         precision QNaN.  Along the way it will cause an unmasked exception
-;         when read off the chip and cause changes to the status register.
-;         So the preservation routine will need to modify the mode register to 
-;         mask off the exceptions, save the state of the status register before
-;         saving the FP regs, and restore the status and mode registers to their
-;         original settings when the save is complete.
-;
-;  REFERENCE:  The instructions to drive the Am29027 are described in the
-;         Am29027 manual beginning on page 17.  Table 4 describes the 
-;         operation codes and table 3 the multiplexer codes.  Communication
-;         with the 29000 is described on pages 11 and 12 of the Am29027
-;         manual and chapters 6 and 8 of the Am29000 User's Manual
-;
-;  MACRO NAME:  save_FP_regs
-;
-;  FUNCTION:    to save the AMD 29027 floating point register values in the
-;               29000 general purpose registers
-;
-;  INPUT PARAMETERS:  fp_register, one of the 29027 registers FP3 - FP7
-;
-;  REGISTER USAGE:  the following registers are used in save_FP_regs
-;
-;         rtn0    this register is used in setting the mode and status registers
-;         rtn1    this register is used in setting the mode and status registers
-;         rtn6    this register is used to store the MSW when FP3 is saved
-;         rtn7    this register is used to store the LSW when FP3 is saved
-;         rtn8    this register is used to store the MSW when FP4 is saved
-;         rtn9    this register is used to store the LSW when FP4 is saved
-;
-
- .macro save_FP_regs,fp_register
-  .ifdef _29027_MODE
-    ; 
-    ; For 29027 mode, expand the macro into 29027 code to preserve FP register
-    ;
-    .ifeqs "@fp_register@","FP3"
-       const rtn6,__29027Mode                  ; Load the address of FP mode
-       consth rtn6,__29027Mode
-       load 0,0,rtn0,rtn6                      ; Load MSW of FP mode into rtn0
-       add rtn6,rtn6,4                         ; Increment rtn6  + 4
-       load 0,0,rtn1,rtn6                      ; Load LSW of FP mode into rtn1
-       const rtn6,CP_RESERVED_OP_EXCP_MASK     ; Load mask to disable exception 
-       consth rtn6,CP_RESERVED_OP_EXCP_MASK 
-       or rtn0,rtn0,rtn6                       ; OR in disable of exception mask
-       cp_write_mode rtn1, rtn0                ; Reset mode w/exception disabled
-       cp_read_status rtn0                     ; Read status and save in rtn1
-       const  rtn6,CP_PASS_P | CP_P_EQ_RF3     ; Instruction is PASS_P from RF3
-       consth rtn6,CP_PASS_P | CP_P_EQ_RF3 
-                                               ; Load & execute the instruction
-                                               ;
-       store  1,CP_WRITE_INST | CP_START,rtn6,rtn6
-       load   1,CP_READ_MSBS,rtn6,rtn6         ; Read the MSW to first register
-       load   1,CP_READ_LSBS,rtn7,rtn7         ; Read the LSW to second register
-       cp_write_status rtn0                    ; Restore the original status
-       const rtn1,__29027Mode                  ; Load the address of FP mode
-       consth rtn1,__29027Mode
-       load 0,0,rtn0,rtn1                      ; Load MSW of FP mode into rtn0
-       add rtn1,rtn1,4                         ; Increment rtn6 to __29027Mode+4
-       load 0,0,rtn1,rtn1                      ; Load LSW of FP mode into rtn1
-       cp_write_mode rtn1, rtn0                ; Restore the original write mode
-    .endif
-    .ifeqs "@fp_register@","FP4"
-       const rtn8,__29027Mode                  ; Load the address of FP mode
-       consth rtn8,__29027Mode
-       load 0,0,rtn0,rtn8                      ; Load MSW of FP mode into rtn0
-       add rtn8,rtn8,4                         ; Increment rtn6 + 4
-       load 0,0,rtn1,rtn8                      ; Load LSW of FP mode into rtn1
-       const rtn8,CP_RESERVED_OP_EXCP_MASK     ; Load mask to disable exception 
-       consth rtn8,CP_RESERVED_OP_EXCP_MASK 
-       or rtn0,rtn0,rtn8                       ; OR in disable of exception mask
-       cp_write_mode rtn1, rtn0                ; Reset mode w/exception disabled
-       cp_read_status rtn0                     ; Read status and save in rtn1
-       const  rtn8,CP_PASS_P | CP_P_EQ_RF4     ; Instruction is PASS_P from RF4
-       consth rtn8,CP_PASS_P | CP_P_EQ_RF4 
-                                               ; Load & execute the instruction
-                                               ;
-       store  1,CP_WRITE_INST | CP_START,rtn8,rtn8
-       load   1,CP_READ_MSBS,rtn8,rtn8         ; Read the MSW to first register
-       load   1,CP_READ_LSBS,rtn9,rtn9         ; Read the LSW to second register
-       cp_write_status rtn0                    ; Restore the original status
-       const rtn1,__29027Mode                  ; Load the address of FP mode
-       consth rtn1,__29027Mode
-       load 0,0,rtn0,rtn1                      ; Load MSW of FP mode into rtn0
-       add rtn1,rtn1,4                         ; Increment rtn6 + 4
-       load 0,0,rtn1,rtn1                      ; Load LSW of FP mode into rtn1
-       cp_write_mode rtn1, rtn0                ; Restore the original write mode
-    .endif
-  .else
-    ; 
-    ; For 29000 mode, do nothing
-    ;
-  .endif
- .endm
-;
-;  MACRO NAME:  restore_FP_regs
-;
-;  FUNCTION:    to restore the AMD 29027 floating point register values from the
-;               29000 general purpose registers
-;
-;  INPUT PARAMETERS:  fp_register, one of the 29027 registers FP3 - FP7
-;
-;  REGISTER USAGE:  the following registers are used in restore_FP_regs
-;
-;         rtn0    this register is used in setting the mode and status registers
-;         rtn6    the value in this register is stored as the MSW of FP3 
-;         rtn7    the value in this register is stored as the LSW of FP3 
-;         rtn8    the value in this register is stored as the MSW of FP4 
-;         rtn9    the value in this register is stored as the LSW of FP4 
-;
- .macro restore_FP_regs,fp_register
-  .ifdef _29027_MODE
-    ;
-    ; For 29027 mode, move data from return registers to the correct FP register
-    ;
-    .ifeqs "@fp_register@","FP3"
-       store  1,CP_WRITE_R ,rtn6,rtn7          ; Move the data to the R register
-                                               ; Then create the instruction
-                                               ;
-       const   rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF3
-       consth  rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF3
-                                               ;
-                                               ; Perform the write
-                                               ;
-       store  1,(CP_WRITE_INST | CP_START),rtn0,0
-    .endif
-    .ifeqs "@fp_register@","FP4"
-       store  1,CP_WRITE_R ,rtn8,rtn9          ; Move the data to the R register
-                                               ; Then create the instruction
-                                               ;
-       const   rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF4
-       consth  rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF4
-                                               ;
-                                               ; Perform the write
-                                               ;
-       store  1,(CP_WRITE_INST | CP_START),rtn0,0
-    .endif
-  .else
-    ;
-    ; For 29000 mode, do nothing.
-    ;
-  .endif
- .endm
-; 
-; end of file intrinsi.h
diff --git a/newlib/libc/sys/a29khif/sys/macros.h b/newlib/libc/sys/a29khif/sys/macros.h
deleted file mode 100644
index 3c832f033..000000000
--- a/newlib/libc/sys/a29khif/sys/macros.h
+++ /dev/null
@@ -1,37 +0,0 @@
-; @(#)macros.h	1.3 90/10/14 20:56:10, Copyright 1989, 1990 AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; macros.h
-;	Short macros of general utility
-
-	.macro	mov, dest,src
-	add	dest, src, 0
-	.endm
-
-	.macro	not, dest,src
-	nand	dest, src, src
-	.endm
diff --git a/newlib/libc/sys/a29khif/sys/proreg.h b/newlib/libc/sys/a29khif/sys/proreg.h
deleted file mode 100644
index ca16b708c..000000000
--- a/newlib/libc/sys/a29khif/sys/proreg.h
+++ /dev/null
@@ -1,60 +0,0 @@
-; @(#)proreg.h	1.3 90/10/14 20:56:11, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; proreg.h
-;
-	; 16 function value return regs
-	.reg	v0,  gr96
-	.reg	v1,  gr97
-	.reg	v2,  gr98
-	.reg	v3,  gr99
-	.reg	v4,  gr100
-	.reg	v5,  gr101
-	.reg	v6,  gr102
-	.reg	v7,  gr103
-	.reg	v8,  gr104
-	.reg	v9,  gr105
-	.reg	v10, gr106
-	.reg	v11, gr107
-	.reg	v12, gr108
-	.reg	v13, gr109
-	.reg	v14, gr110
-	.reg	v15, gr111
-;
-	.reg	rsp, gr1	; Register Stack Pointer
-	.reg	ret, gr96	; First word of return value
-	.reg	rp0, gr112	; Reserved for Programmer, #0
-	.reg	rp1, gr113	; Reserved for Programmer, #1
-	.reg	rp2, gr114	; Reserved for Programmer, #2
-	.reg	rp3, gr115	; Reserved for Programmer, #3
-	.reg	tav, gr121	; Temporary, Argument for Trap Handlers
-	.reg	tpc, gr122	; Temporary, Return PC for Trap Handlers
-	.reg	lrp, gr123	; Large Return Pointer
-	.reg	slp, gr124	; Static Link Pointer
-	.reg	msp, gr125	; Memory Stack Pointer
-	.reg	rab, gr126	; Register Allocate Bound
-	.reg	rfb, gr127	; Register Free Bound
diff --git a/newlib/libc/sys/a29khif/sys/romdcl.h b/newlib/libc/sys/a29khif/sys/romdcl.h
deleted file mode 100644
index d52ca0598..000000000
--- a/newlib/libc/sys/a29khif/sys/romdcl.h
+++ /dev/null
@@ -1,392 +0,0 @@
-; @(#)romdcl.h	1.4 90/10/14 20:56:12, Copyright 1988, 1989, 1990 AMD 
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-	.sbttl	"Register, Constant and Macro Declarations - v1.4"
-
-; Copyright 1988, Advanced Micro Devices
-; Written by Gibbons and Associates, Inc.
-
-;v1.4	JG	correct FUNCTION macro - fault in register padding to even
-
-;-----------------------------------------------------------------------
-;Global registers
-;-----------------------------------------------------------------------
-	.reg	rsp,		gr1	;local reg. var. stack pointer
-
-	.equ	SYS_TEMP,	64	;system temp registers
-
-	.reg	st0,		gr64
-	.reg	st1,		gr65
-	.reg	st2,		gr66
-	.reg	st3,		gr67
-	.reg	st4,		gr68
-	.reg	st5,		gr69
-	.reg	st6,		gr70
-	.reg	st7,		gr71
-	.reg	st8,		gr72
-	.reg	st9,		gr73
-	.reg	st10,		gr74
-	.reg	st11,		gr75
-	.reg	st12,		gr76
-	.reg	st13,		gr77
-	.reg	st14,		gr78
-	.reg	st15,		gr79
-
-	.equ	SYS_STAT,	80	;system static registers
-
-	.reg	ss0,		gr80
-	.reg	ss1,		gr81
-	.reg	ss2,		gr82
-	.reg	ss3,		gr83
-	.reg	ss4,		gr84
-	.reg	ss5,		gr85
-	.reg	ss6,		gr86
-	.reg	ss7,		gr87
-	.reg	ss8,		gr88
-	.reg	ss9,		gr89
-	.reg	ss10,		gr90
-	.reg	ss11,		gr91
-	.reg	ss12,		gr92
-	.reg	ss13,		gr93
-	.reg	ss14,		gr94
-	.reg	ss15,		gr95
-
-	.equ	RET_VAL,	96	;return registers
-
-	.reg	v0,		gr96
-	.reg	v1,		gr97
-	.reg	v2,		gr98
-	.reg	v3,		gr99
-	.reg	v4,		gr100
-	.reg	v5,		gr101
-	.reg	v6,		gr102
-	.reg	v7,		gr103
-	.reg	v8,		gr104
-	.reg	v9,		gr105
-	.reg	v10,		gr106
-	.reg	v11,		gr107
-	.reg	v12,		gr108
-	.reg	v13,		gr109
-	.reg	v14,		gr110
-	.reg	v15,		gr111
-
-	.equ	TEMP_REG,	96	;temp registers
-
-	.reg	t0,		gr96
-	.reg	t1,		gr97
-	.reg	t2,		gr98
-	.reg	t3,		gr99
-	.reg	t4,		gr100
-	.reg	t5,		gr101
-	.reg	t6,		gr102
-	.reg	t7,		gr103
-	.reg	t8,		gr104
-	.reg	t9,		gr105
-	.reg	t10,		gr106
-	.reg	t11,		gr107
-	.reg	t12,		gr108
-	.reg	t13,		gr109
-	.reg	t14,		gr110
-	.reg	t15,		gr111
-
-	.equ	RES_REG,	112	;reserved (for user)
-
-	.reg	r0,		gr112
-	.reg	r1,		gr113
-	.reg	r2,		gr114
-	.reg	r3,		gr115
-
-	.equ	TEMP_EXT,	116	;temp extension (and shared)
-
-	.reg	x0,		gr116
-	.reg	x1,		gr117
-	.reg	x2,		gr118
-	.reg	x3,		gr119
-	.reg	x4,		gr120
-	.reg	x5,		gr121
-	.reg	x6,		gr122
-	.reg	x7,		gr123
-	.reg	x8,		gr124
-
-;-----------------------------------------------------------------------
-;Global registers with special calling convention uses
-;-----------------------------------------------------------------------
-
-	.reg	tav,		gr121	;trap handler argument (also x6)
-	.reg	tpc,		gr122	;trap handler return (also x7)
-	.reg	lsrp,		gr123	;large return pointer (also x8)
-	.reg	slp,		gr124	;static link pointer (also x9)
-	.reg	msp,		gr125	;memory stack pointer
-	.reg	rab,		gr126	;register alloc bound
-	.reg	rfb,		gr127	;register frame bound
-
-;-----------------------------------------------------------------------
-;Local compiler registers - output parameters, etc.
-;  (only valid if frame has been established)
-;-----------------------------------------------------------------------
-
-	.reg	p15,		lr17	;parameter registers
-	.reg	p14,		lr16
-	.reg	p13,		lr15
-	.reg	p12,		lr14
-	.reg	p11,		lr13
-	.reg	p10,		lr12
-	.reg	p9,		lr11
-	.reg	p8,		lr10
-	.reg	p7,		lr9
-	.reg	p6,		lr8
-	.reg	p5,		lr7
-	.reg	p4,		lr6
-	.reg	p3,		lr5
-	.reg	p2,		lr4
-	.reg	p1,		lr3
-	.reg	p0,		lr2
-
-
-;-----------------------------------------------------------------------
-;TLB register count
-;-----------------------------------------------------------------------
-
-	.equ	TLB_CNT,	128
-
-	.eject
-
-;-----------------------------------------------------------------------
-;constants for general use
-;-----------------------------------------------------------------------
-	.equ	WRD_SIZ,	4		;word size
-	.equ	TRUE,		0x80000000	;logical true -- bit 31
-	.equ	FALSE,		0x00000000	;logical false -- 0
-	.equ	CHKPAT_a5,	0xa5a5a5a5	;check pattern
-
-;-----------------------------------------------------------------------
-;constants for data access control
-;-----------------------------------------------------------------------
-	.equ	CE,		0b1		;coprocessor enable
-	.equ	CD,		0b0		;coprocessor disable
-
-	.equ	AS,		0b1000000	 ;set for I/O
-	.equ	PA,		0b0100000	 ;set for physical ad
-	.equ	SB,		0b0010000	 ;set for set BP
-	.equ	UA,		0b0001000	 ;set for user access
-
-	.equ	ROM_OPT,	0b100		 ;OPT values for acc
-	.equ	DATA_OPT,	0b000
-	.equ	INST_OPT,	0b000
-
-	.equ	ROM_CTL,	(PA + ROM_OPT)	;control field
-	.equ	DATA_CTL,	(PA + DATA_OPT)
-	.equ	INST_CTL,	(PA + INST_OPT)
-	.equ	IO_CTL,		(AS + PA + DATA_OPT)
-
-
-	.eject
-
-;-----------------------------------------------------------------------
-;defined vectors
-;-----------------------------------------------------------------------
-
-	.equ	V_IllegalOp,		0
-	.equ	V_Unaligned,		1
-	.equ	V_OutOfRange,		2
-	.equ	V_NoCoProc,		3
-	.equ	V_CoProcExcept,		4
-	.equ	V_ProtViol,		5
-	.equ	V_InstAccExcept,	6
-	.equ	V_DataAccExcept,	7
-	.equ	V_UserInstTLB,		8
-	.equ	V_UserDataTLB,		9
-	.equ	V_SupInstTLB,		10
-	.equ	V_SupDataTLB,		11
-	.equ	V_InstTLBProt,		12
-	.equ	V_DataTLBProt,		13
-	.equ	V_Timer,		14
-	.equ	V_Trace,		15
-	.equ	V_INTR0,		16
-	.equ	V_INTR1,		17
-	.equ	V_INTR2,		18
-	.equ	V_INTR3,		19
-	.equ	V_TRAP0,		20
-	.equ	V_TRAP1,		21
-
-	;				22 - 31 reserved
-
-	.equ	V_MULTIPLY,		32
-	.equ	V_DIVIDE,		33
-	.equ	V_MULTIPLU,		34
-	.equ	V_DIVIDU,		35
-	.equ	V_CONVERT,		36
-
-	;				37 - 41 reserved
-
-	.equ	V_FEQ,			42
-	.equ	V_DEQ,			43
-	.equ	V_FGT,			44
-	.equ	V_DGT,			45
-	.equ	V_FGE,			46
-	.equ	V_DGE,			47
-	.equ	V_FADD,			48
-	.equ	V_DADD,			49
-	.equ	V_FSUB,			50
-	.equ	V_DSUB,			51
-	.equ	V_FMUL,			52
-	.equ	V_DMUL,			53
-	.equ	V_FDIV,			54
-	.equ	V_DDIV,			55
-
-	;				56 - 63 reserved
-
-	.equ	V_SPILL,		64
-	.equ	V_FILL,			65
-	.equ	V_BSDCALL,		66
-	.equ	V_SYSVCALL,		67
-	.equ	V_BRKPNT,		68
-	.equ	V_EPI_OS,		69
-
-	.eject
-
- .macro	R_LEFT,REGVAR
-
- ;Rotate left
- ;
- ; Parameters:	REGVAR	register to rotate
-
-	add	REGVAR, REGVAR, REGVAR	;shift left by 1 bit, C = MSB
-	addc	REGVAR, REGVAR, 0	;add C to LSB
-
- .endm
-;----------------------------------------------------------------------
-
-
- .macro	FUNCTION,NAME,INCNT,LOCCNT,OUTCNT
-
- ;Introduces a non-leaf routine.
- ;
- ;This macro defines the standard tag word before the function,
- ;then establishes the statement label with the function's name
- ;and finally allocates a register stack frame.  It may not be used
- ;if a memory stack frame is required.
- ;
- ;Note also that the size of the register stack frame is limited.
- ;Neither this nor the lack of a memory frame is considered to be
- ;a severe restriction in an assembly language environment.  The
- ;assembler will report errors if the requested frame is too large
- ;for this macro.
- ;
- ;It may be good practice to allocate an even number of both output
- ;registers and local registers.  This will help in maintaining
- ;double word alignment within these groups.  The macro will assure
- ;double word alignment of the stack frame as a whole as required
- ;for correct linkage.
- ;
- ; Paramters:	NAME	the function name
- ;		INCNT	input parameter count
- ;		LOCCNT	local register count
- ;		OUTCNT	output parameter count
-
-	.set	ALLOC_CNT, ((2 + OUTCNT + LOCCNT) << 2)
-	.set	PAD_CNT, (ALLOC_CNT & 4)
-	.set	ALLOC_CNT, (ALLOC_CNT + PAD_CNT)
-	.set	REG_PAD, (PAD_CNT >> 2)
-   .if	(INCNT)
-	.set	IN_PRM, (4 + OUTCNT + REG_PAD + LOCCNT + 0x80)
-   .endif
-   .if	(LOCCNT)
-	.set	LOC_REG, (2 + OUTCNT + REG_PAD + 0x80)
-   .endif
-   .if	(OUTCNT)
-	.set	OUT_PRM, (2 + 0x80)
-   .endif
-
-	.word	((2 + OUTCNT + LOCCNT) << 16)
-NAME:
-	sub	rsp, rsp, ALLOC_CNT
-	asgeu	V_SPILL, rsp, rab
-	add	lr1, rsp, ((4 + OUTCNT + LOCCNT + REG_PAD + INCNT) << 2)
-
- .endm
-;----------------------------------------------------------------------
-
-
- .macro	LEAF,NAME,INCNT
-
- ;Introduces a leaf routine
- ;
- ;This macro defines the standard tag word before the function,
- ;then establishes the statement label with the function's name.
- ;
- ; Paramters:	NAME	the function name
- ;		INCNT	input parameter count
-
-   .if	(INCNT)
-	.set	IN_PRM, (2 + 0x80)
-   .endif
-	.set	ALLOC_CNT, 0
-
-	.word	0
-NAME:
-
- .endm
-;----------------------------------------------------------------------
-
-
- .macro	EPILOGUE
-
- ;De-allocates register stack frame (only and only if necessary).
-
-   .if	(ALLOC_CNT)
-
-	add	rsp, rsp, ALLOC_CNT
-	nop
-	jmpi	lr0
-	asleu	V_FILL, lr1, rfb
-
-   .else
-
-	jmpi	lr0
-	nop
-
-   .endif
-
-	.set	IN_PRM, (1024)		;illegal, to cause err on ref
-	.set	LOC_REG, (1024)		;illegal, to cause err on ref
-	.set	OUT_PRM, (1024)		;illegal, to cause err on ref
-	.set	ALLOC_CNT, (1024)	;illegal, to cause err on ref
-
- .endm
-;----------------------------------------------------------------------
-
-
-;Initial values for macro set variables to guard against misuse
-
-	.set	IN_PRM, (1024)		;illegal, to cause err on ref
-	.set	LOC_REG, (1024)		;illegal, to cause err on ref
-	.set	OUT_PRM, (1024)		;illegal, to cause err on ref
-	.set	ALLOC_CNT, (1024)	;illegal, to cause err on ref
-
-;......................................................................
-; end of romdcl.h
diff --git a/newlib/libc/sys/a29khif/sys/smartmac.h b/newlib/libc/sys/a29khif/sys/smartmac.h
deleted file mode 100644
index 2c870fa2a..000000000
--- a/newlib/libc/sys/a29khif/sys/smartmac.h
+++ /dev/null
@@ -1,1491 +0,0 @@
-; @(#)smartmac.h	1.2 90/10/14 20:56:14, AMD
-; start of smartmac.h file
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; 
-  .title "AM29000 Smart Macro Package"
-;
-;    Floating point package for AMD 29000 family
-;
-;    Copyright 1988 Advanced Micro Devices, Inc.
-;
-;    All rights reserved
-;
-;    Developed for AMD by Quantitative Technology Corporation
-;                         8700 SW Creekside Place Suite D
-;                         Beaverton OR 97005
-;                         (503) 626-3081
-;
-;    Version information :
-;
-;        Version 1.0 - 1 June 1988   - Larry Westerman (smart_macros.h)
-; 
-; Revision 1.4  89/02/01  18:26:03  jimh
-; Changed to relect the new symbols from Bob Perlman, and the new include file.s
-; 
-; Revision 1.3  89/01/31  10:13:34  jimh
-; Updated to use symbols from Bob Perlmans fpsymbol.h file.  This is
-; an extensive change.
-; 
-; Revision 1.2  89/01/26  09:23:50  jimh
-; This version checked in previous to substituting Bob Perlman's floating
-; point symbols.
-; 
-; Revision 1.1  89/01/24  13:23:29  jim
-; Initial revision
-; Replaces smart_macros.h ver 1.11.
-; 
-; 
-; 
-;
-;  NOTES:
-;
-;    This package makes the following assumptions about the use of these
-;    smart macros:
-;
-;      1.  These macros will be after the entry code for a transcendental
-;          routine.  This entry code will move the original function arguments
-;          (by value, if the target language is FORTRAN) into the global
-;          registers t0/t1 and t2/t3 (t0 and t2 for single precision
-;          routines).
-;      2.  The sources of all operands will be one register from the
-;          following list:
-;            t0 or  t2  - the source is one of the original input operands
-;            rtn0       - the source is rtn0, which should be used as the
-;                         source for all constant values to be sent to the
-;                         AM29027 (when used)
-;            FP0 - FP7  - the source is one of the fp registers
-;      3.  The destination of all operations will be a register from the
-;          following list:
-;            rtn0       - the destination is the function return value
-;            FP0 - FP7  - the destination is one of the fp registers
-;      4.  The additional registers available for temporary use are
-;          t4, lrp, and slp.  
-;
-;    These register definitions are all taken from the file "proregs.a"
-;    which was supplied by AMD.  NOTE that the FP0-FP7 registers, for the
-;    Am29000 version of the file, overlap with the rtn0-rtn15 registers, so
-;    that FP0 corresponds to rtn0/rtn1, FP1 to rtn2/rtn3, and so forth.
-;
- .equ ERROR,0
- .equ NO_ERROR,1
-
- .equ DOUBLE_FUNCTION,0
- .equ SINGLE_FUNCTION,1
-
- .equ T_OPERATION,0
- .equ Q_OPERATION,1
-
- .equ R_SOURCE_29000,0
- .equ R_SOURCE_29027,1
-
- .equ S_SOURCE_29000,0
- .equ S_SOURCE_29027,1
-
- .equ DESTINATION_29000, 0
- .equ DESTINATION_29027, 1
-
-;
-; SMART MACRO : mfadd
-;
-; FUNCTION : single-precision floating point addition
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mfadd,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mfadd: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE
-  ;
-  ; For 29027 mode, perform full suite of checking
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S | CP_P_PLUS_T
-     .set OPERATION_TYPE, T_OPERATION
-     perform_single_operation destination,operand1,operand2
-     read_single_result destination
-    ;
-    ; Save the instruction for the next macro invocation
-    ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
-  ;
-  ; For 29000 mode, simply produce equivalent trap-inducing instruction
-  ;
-     fadd destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mfadd macro definition
-
-;
-; SMART MACRO : mfsub
-;
-; FUNCTION : single-precision floating point subtraction
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mfsub,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mfsub: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE
-  ;
-  ; For 29027 mode, perform full suite of checking
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S | CP_P_MINUS_T
-     .set OPERATION_TYPE, T_OPERATION
-     perform_single_operation destination,operand1,operand2
-     read_single_result destination
-    ;
-    ; Save the instruction for the next macro invocation
-    ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
-  ;
-  ; For 29000 mode, simply produce equivalent trap-inducing instruction
-  ;
-     fsub destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mfsub macro definition
-
-;
-; SMART MACRO : mfmul
-;
-; FUNCTION : single-precision floating point multiplication
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mfmul,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mfmul: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE
-  ;
-  ; For 29027 mode, perform full suite of checking
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S | CP_P_TIMES_Q
-     .set OPERATION_TYPE, Q_OPERATION
-     perform_single_operation destination,operand1,operand2
-     read_single_result destination
-    ;
-    ; Save the instruction for the next macro invocation
-    ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
-  ;
-  ; For 29000 mode, simply produce equivalent trap-inducing instruction
-  ;
-     fmul destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mfmul macro definition
-
-;
-; SMART MACRO : mfdiv
-;
-; FUNCTION : single-precision floating point divide
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mfdiv,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mfdiv: missing parameter(s)"
-     .exitm
-   .endif
-
-  ;
-  ; Generate the trap instruction in all cases
-  ;
-   fdiv destination, operand1, operand2
-
- .endm        ; end of mfdiv macro definition
-
-
-;
-; SMART MACRO : mdadd
-;
-; FUNCTION : double-precision floating point addition
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mdadd,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mdadd: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE
-  ;
-  ; For 29027 mode, perform full suite of checking
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D | CP_P_PLUS_T
-     .set OPERATION_TYPE, T_OPERATION
-     perform_double_operation destination,operand1,operand2
-     read_double_result destination
-    ;
-    ; Save the instruction for the next macro invocation
-    ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
-  ;
-  ; For 29000 mode, simply produce equivalent trap-inducing instruction
-  ;
-     dadd destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mdadd macro definition
-
-;
-; SMART MACRO : mdsub
-;
-; FUNCTION : double-precision floating point subtraction
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mdsub,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mdsub: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE
-  ;
-  ; For 29027 mode, perform full suite of checking
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D | CP_P_MINUS_T
-     .set OPERATION_TYPE, T_OPERATION
-     perform_double_operation destination,operand1,operand2
-     read_double_result destination
-    ;
-    ; Save the instruction for the next macro invocation
-    ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
-  ;
-  ; For 29000 mode, simply produce equivalent trap-inducing instruction
-  ;
-     dsub destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mdsub macro definition
-
-;
-; SMART MACRO : mdmul
-;
-; FUNCTION : double-precision floating point multiplication
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mdmul,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mdmul: missing parameter(s)"
-     .exitm
-   .endif
-   
-   .ifdef _29027_MODE
- ;
- ; For 29027 mode, perform full suite of checking
- ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D | CP_P_TIMES_Q
-     .set OPERATION_TYPE, Q_OPERATION
-     perform_double_operation destination,operand1,operand2
-     read_double_result destination
-   ;
-   ; Save the instruction for the next macro invocation
-   ;
-     .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION
-
-   .else
- ;
- ; For 29000 mode, simply produce equivalent trap-inducing instruction
- ;
-     dmul destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mdmul macro definition
-
-;
-; SMART MACRO : mddiv
-;
-; FUNCTION : double-precision floating point divide
-;
-; Required arguments : destination - one of possible destinations
-;                      operand1    - one of possible sources
-;                      operand2    - one of possible sources
-;
- .macro mddiv,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "mddiv: missing parameter(s)"
-     .exitm
-   .endif
-
- ;
- ; Generate the trap instruction in all cases
- ;
-   ddiv destination, operand1, operand2
-
- .endm        ; end of mfdiv macro definition
-
-;
-;  SMART MACRO: mconvert
-;
-;  FUNCTION: Floating point/integer conversion
-;
-;  PARAMETERS:  destination           -  one of the possible destinations
-;               source                -  one of the possible sources
-;               sign_flag             -  one of SIGNED or UNSIGNED
-;               rounding_mode         -  one of ROUND_TO_NEAREST, ROUND_TO_PLUS,
-;                                         ROUND_TO_MINUS, ROUND_TO_ZERO
-;               destination_precision -  one of FORMAT_INTEGER, FORMAT_DOUBLE,
-;                                         or FORMAT_SINGLE
-;               source_precision      -  one of FORMAT_INTEGER, FORMAT_DOUBLE,
-;                                         or FORMAT_SINGLE
-;
- .macro mconvert, destination, source, sign_flag, rounding_mode, destination_precision, source_precision
-
-   .if $narg!=6
-     .err
-     .print "mconvert: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .if ( destination_precision == FORMAT_INTEGER )
-       .set CURRENT_INSTRUCTION, CP_CONVERT_T_TO_INT
-       select_T_operand source
-       .if ( source_precision == FORMAT_DOUBLE )
-         .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_S_D
-       .else
-         .if ( source_precision == FORMAT_SINGLE )
-           .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_S_S
-         .else
-           .err
-           .print "mconvert: invalid source type"
-           .exitm
-         .endif
-       .endif
-     .else
-       .if ( destination_precision == FORMAT_DOUBLE )
-         .if ( source_precision == FORMAT_SINGLE )
-           .set CURRENT_INSTRUCTION, CP_PASS_P | CP_P_EQ_R | CP_D_S
-           select_P_operand source
-         .else
-           .if ( source_precision == FORMAT_INTEGER )
-             .set CURRENT_INSTRUCTION, CP_I_CONVERT_T_TO_FLOAT | CP_D_S
-             select_T_operand source
-           .else
-             .err
-             .print "mconvert: invalid source type"
-             .exitm
-           .endif
-         .endif
-       .else
-         .if ( destination_precision == FORMAT_SINGLE )
-           .if ( source_precision == FORMAT_DOUBLE )
-             .set CURRENT_INSTRUCTION, CP_PASS_P | CP_P_EQ_R | CP_S_D
-             select_P_operand source
-           .else
-             .if ( source_precision == FORMAT_INTEGER )
-               .set CURRENT_INSTRUCTION, CP_I_CONVERT_T_TO_FLOAT | CP_S_S
-               select_T_operand source
-             .else
-               .err
-               .print "mconvert: invalid source type"
-               .exitm
-             .endif
-           .endif
-         .else
-           .err
-           .print "mconvert: invalid destination type "
-           .exitm
-         .endif
-       .endif
-     .endif
-    ;
-    ; Perform the operation, using a 29027 dummy register as the second
-    ; source operand, to avoid writing any data inappropriately to the
-    ; 29027
-    ;
-     select_destination destination
-     .set S_SOURCE, S_SOURCE_29027
-     .if ( source_precision == FORMAT_DOUBLE )
-       write_and_execute_double_operation source, FP0
-     .else
-       write_and_execute_single_operation source, FP0
-     .endif
-     .if ( destination_precision == FORMAT_DOUBLE )
-       read_double_result destination
-     .else
-       .if ( destination_precision == FORMAT_SINGLE )
-         read_single_result destination
-       .else
-         read_integer_result destination
-       .endif
-     .endif
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     convert destination,source,sign_flag,rounding_mode,destination_precision,source_precision
-  
-   .endif
-
- .endm       ; end of mfeq macro definition
-
-;
-;  SMART MACRO: mfeq
-;
-;  FUNCTION: Single precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mfeq, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mfeq: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compares - @destination@"
-       .exitm
-     .else
-       perform_single_operation destination, operand1, operand2
-       cp_read_flags destination
-       srl  destination,  destination, CP_EQUAL_FLAG_POSITION
-       sll  destination,  destination,  31
-     .endif
-
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     feq destination,operand1,operand2
-
-   .endif
-
- .endm       ; end of mfeq macro definition
-
-;
-;  SMART MACRO: mfge
-;
-;  FUNCTION: Single precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mfge, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mfge: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compares - @destination@"
-       .exitm
-     .else
-        perform_single_operation destination, operand1, operand2
-        cp_read_flags destination
-        and   destination, destination, CP_EQUAL_FLAG | CP_GREATER_THAN_FLAG
-        cpneq destination, destination, 0x0
-     .endif
-
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     fge destination,operand1,operand2
-
-   .endif
-
- .endm       ; end of mfge macro definition
-
-;
-;  SMART MACRO: mfgt
-;
-;  FUNCTION: Single precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mfgt, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mfgt: missing parameter(s)"
-     .exitm
-   .endif
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_S_S  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compares - @destination@"
-       .exitm
-     .else
-        perform_single_operation destination, operand1, operand2
-        cp_read_flags destination
-        srl  destination,  destination, CP_GREATER_THAN_FLAG_POSITION
-        sll  destination,  destination,  31
-     .endif
-
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     fgt destination,operand1,operand2
-
-   .endif
-
- .endm       ; end of mfgt macro definition
-
-;
-;  SMART MACRO: mdeq
-;
-;  FUNCTION: Double precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mdeq, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mdeq: missing parameter(s)"
-     .exitm
-   .endif
-
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compare - @destination@"
-       .exitm
-     .else
-       perform_double_operation destination, operand1, operand2
-       cp_read_flags destination
-       srl  destination,  destination, CP_EQUAL_FLAG_POSITION
-       sll  destination,  destination,  31
-     .endif
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     deq destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mdeq macro definition
-
-;
-;  SMART MACRO: mdge
-;
-;  FUNCTION: Double precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mdge, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mdge: missing parameter(s)"
-     .exitm
-   .endif
-
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compare - @destination@"
-       .exitm
-     .else
-       perform_double_operation destination, operand1, operand2
-       cp_read_flags destination
-       and   destination,  destination,  CP_EQUAL_FLAG | CP_GREATER_THAN_FLAG
-       cpneq destination,  destination,  0x0
-     .endif
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     dge destination,operand1,operand2
-
-   .endif
-
- .endm        ; end of mdge macro definition
-
-;
-;  SMART MACRO: mdgt
-;
-;  FUNCTION: Double precision, floating point compare
-;
-;  PARAMETERS:  destination  -  one of the possible destinations
-;               operand1     -  one of the possible sources
-;               operand2     -  one of the possible sources
-;
- .macro mdgt, destination, operand1, operand2
-
-   .if $narg!=3
-     .err
-     .print "mdgt: missing parameter(s)"
-     .exitm
-   .endif
-
-
-   .ifdef _29027_MODE   
-  ;
-  ; Generate in line 29027 code
-  ;
-     initialize_previous_instruction
-     .set CURRENT_INSTRUCTION, CP_D_D  | CP_COMPARE_P_AND_T
-     .set OPERATION_TYPE,  T_OPERATION
-     select_destination destination
-    ;
-    ; 29027 registers are not valid destinations for compare operations
-    ; If the destination is a 29000 register, write the appropriate
-    ; Boolean value to that register.
-    ;
-     .if ( DESTINATION == DESTINATION_29027 )
-       .err
-       .print "29027 destinations invalid for compare - @destination@"
-       .exitm
-     .else
-       perform_double_operation destination, operand1, operand2
-       cp_read_flags destination
-       srl  destination,  destination,  CP_GREATER_THAN_FLAG_POSITION
-       sll  destination,  destination,  31
-     .endif
-   .else
-  ;
-  ; For 29000 mode (the default) just invoke the trap-inducing instruction
-  ;
-     dgt destination,operand1,operand2
-
-   .endif
-
- .endm    ; end of mdgt macro definition
-
-;
-; MACRO NAME : perform_double_operation
-;
-; FUNCTION : After the instruction base is set up, do the appropriate checking
-;            to send the instruction if necessary, send the double-precision
-;            operands if necessary, and start the operation
-;
-; PARAMETERS : destination - one of possible destination operands
-;              operand1    - one of possible source operands
-;              operand2    - one of possible source operands
-;
- .macro perform_double_operation,destination,operand1,operand2
-
-   .if $narg!=3
-     .err
-     .print "perform_double_operation: missing parameter(s)"
-     .exitm
-   .endif
-
-  ;
-  ; Start defining the instruction
-  ;
-   select_destination destination
-   select_P_operand   operand1
-   select_S_operand   operand2
-
-   write_and_execute_double_operation operand1, operand2
-
- .endm      ; End of perform_double_operation macro definition
-
-;
-; MACRO NAME : perform_single_operation
-;
-; FUNCTION : After the instruction base is set up, do the appropriate checking
-;            to send the instruction if necessary, send the single-precision
-;            operands if necessary and start the operation
-;
-; PARAMETERS : destination - one of possible destination operands
-;              operand1    - one of possible source operands
-;              operand2    - one of possible source operands
-;
- .macro perform_single_operation,destination,operand1,operand2
-
-  ;
-  ; Start defining the instruction
-  ;
-   select_destination destination
-   select_P_operand operand1
-   select_S_operand operand2
-   write_and_execute_single_operation operand1,operand2
-
- .endm      ; End of perform_single_operation macro definition
-
-;
-; MACRO NAME : write_and_execute_double_operation
-;
-; FUNCTION : Write the instruction and operands for a double-precision
-;            operation, and start the operation
-;
-; PARAMETER : operand1 - first operand of double-precision operation
-;             operand2 - second operand of operation
-;
- .macro write_and_execute_double_operation,operand1,operand2
-   .if ( ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29027 ) )
-  ;
-  ; If both sources are within the 29027, write the instruction
-  ; and start the operation
-  ;
-       const  t4, CURRENT_INSTRUCTION
-       consth t4, CURRENT_INSTRUCTION
-       cp_write_inst t4, START
-   .else
-  ;
-  ; One or both of the sources must be written first, so check the
-  ; previous instruction
-  ;
-       const  t4, CURRENT_INSTRUCTION
-       consth t4, CURRENT_INSTRUCTION
-       cp_write_inst t4
-     .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29027 )
-       .ifeqs "@operand1@","t0"
-         cp_write_r t0, t1, START
-       .else
-         .ifeqs "@operand1@","t2"
-           cp_write_r t2, t3, START
-         .else
-           .ifeqs "@operand1@","rtn0"
-             cp_write_r rtn0, rtn1, START
-           .else
-             .err
-             .print "Invalid source for double operation - @operand1@"
-             .exitm
-           .endif
-         .endif
-       .endif
-     .endif
-     .if ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29000 )
-       .ifeqs "@operand2@","t0"
-         cp_write_s t0, t1, START
-       .else
-         .ifeqs "@operand2@","t2"
-           cp_write_s t2, t3, START
-         .else
-           .ifeqs "@operand2@","rtn0"
-             cp_write_s rtn0, rtn1, START
-           .else
-             .err
-             .print "Invalid source for double operation - @operand1@"
-             .exitm
-           .endif
-         .endif
-       .endif
-     .endif
-     .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29000 )
-       .ifeqs "@operand1@","t0"
-         cp_write_r t0, t1
-       .else
-         .ifeqs "@operand1@","t2"
-           cp_write_r t2, t3
-         .else
-           .ifeqs "@operand1@","rtn0"
-             cp_write_r rtn0, rtn1
-           .else
-             .err
-             .print "Invalid source for double operation - @operand1@"
-             .exitm
-           .endif
-         .endif
-       .endif
-       .ifeqs "@operand2@","t0"
-         cp_write_s t0, t1, START
-       .else
-         .ifeqs "@operand2@","t2"
-           cp_write_s t2, t3, START
-         .else
-           .ifeqs "@operand2@","rtn0"
-             cp_write_s rtn0, rtn1, START
-           .else
-             .err
-             .print "Invalid source for double operation - @operand1@"
-             .exitm
-           .endif
-         .endif
-       .endif
-     .endif
-   .endif
-
- .endm       ; end of write_and_execute_double_operation macro definition
-
-;
-; MACRO NAME : write_and_execute_single_operation
-;
-; FUNCTION : If necessary, read the result from the 29027 into a
-;            register on the 29000
-;
-; PARAMETER : operand1 - first source for single-precision operation
-;             operand2 - second source for operation
-;
- .macro write_and_execute_single_operation,operand1,operand2
-
-   .if ( ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29027 ) )
-  ;
-  ; If both sources are within the 29027, write the instruction
-  ; and start the operation
-  ;
-       const  t4, CURRENT_INSTRUCTION
-       consth t4, CURRENT_INSTRUCTION
-       cp_write_inst t4, START
-   .else
-  ;
-  ; One or both of the sources must be written first, so check the
-  ; previous instruction
-  ;
-     const  t4,CURRENT_INSTRUCTION
-     consth t4,CURRENT_INSTRUCTION
-     cp_write_inst t4, START
-     .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29027 )
-       cp_write_r operand1, operand1, START
-     .endif
-     .if ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29000 )
-       cp_write_s operand2, operand2, START
-     .endif
-     .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29000 )
-       cp_write_rs operand1, operand2, START
-     .endif
-   .endif
-
- .endm      ; End of write_and_execute_single_operation macro definition
-
-;
-; MACRO NAME : read_double_result
-;
-; FUNCTION : If necessary, read the result from the 29027 into a
-;            register on the 29000
-;
-; PARAMETER : destination - one of the possible destination registers
-;
- .macro read_double_result,destination
-   .if ( DESTINATION == DESTINATION_29000 )
-  ;
-  ; If the destination is not within the 29027 register file, read
-  ; the result and store it into the correct register in the 29000
-  ;
-     .ifeqs "@destination@","rtn0"
-       cp_read_dp rtn0, rtn1
-     .else
-       .err
-       .print "Invalid destination for double result - @destination@"
-       .exitm
-     .endif
-   .endif
-
- .endm       ; End of read_double_result macro definition
-
-;
-; MACRO NAME : read_single_result
-;
-; FUNCTION : If necessary, read the result from the 29027 into a
-;            register on the 29000
-;
-; PARAMETER : destination
-;
- .macro read_single_result,destination
-
-   .if ( DESTINATION == DESTINATION_29000 )
-  ;
-  ; If the destination is not within the 29027 register file, read
-  ; the result and store it into the correct register in the 29000
-  ;
-     .ifeqs "@destination@","rtn0"
-       cp_read_sp rtn0
-     .else
-       .err
-       .print "Invalid destination for single result - @destination@"
-       .exitm
-     .endif
-   .endif
-
- .endm       ; End of read_single_result macro definition
-
-;
-; MACRO NAME : read_integer_result
-;
-; FUNCTION : If necessary, read the result from the 29027 into a
-;            register on the 29000
-;
-; PARAMETER : destination
-;
- .macro read_integer_result,destination
-
-   .if ( DESTINATION == DESTINATION_29000 )
-  ;
-  ; If the destination is not within the 29027 register file, read
-  ; the result and store it into the correct register in the 29000
-  ;
-     .ifeqs "@destination@","rtn0"
-       cp_read_int rtn0
-     .else
-       .err
-       .print "Invalid destination for single result - @destination@"
-       .exitm
-     .endif
-   .endif
-
- .endm       ; End of read_integer_result macro definition
-
-;
-; MACRO NAME : select_P_operand
-;
-; FUNCTION : Given an operand, determine if the operand is from the
-;            register file, and if so, set the appropriate bits in
-;            the current instruction word.  In addition, set the
-;            variable R_SOURCE to 0 for local register file, or 1 for
-;            floating-point register file.
-;
-; PARAMETER : operand1 - one of the possible source operands
-;
- .macro select_P_operand,operand1
-   .ifeqs "@operand1@","t0"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","t2"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","rtn0"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP0"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF0
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP1"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF1
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP2"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF2
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP3"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF3
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP4"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF4
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP5"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF5
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP6"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF6
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP7"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF7
-     .exitm
-   .endif
-   .err
-   .print "@operand1@ - Invalid operand"
-
- .endm        ; end of select_P_operand macro definition
-
-;
-; MACRO NAME : select_S_operand
-;
-; FUNCTION : Given an operand, determine if the operand is from the
-;            register file, and if so, set the appropriate bits in
-;            the current instruction word.  In addition, set the
-;            variable S_SOURCE to S_SOURCE_29000 or S_SOURCE_29027
-;            as appropriate
-;
-; PARAMETER : operand2 - one of the possible source operands
-;
- .macro select_S_operand,operand2
-   .ifeqs "@operand2@","t0"
-     .set S_SOURCE,S_SOURCE_29000
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S
-     .endif     
-     .exitm
-   .endif
-   .ifeqs "@operand2@","t2"
-     .set S_SOURCE,S_SOURCE_29000
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S
-     .endif     
-     .exitm
-   .endif
-   .ifeqs "@operand2@","rtn0"
-     .set S_SOURCE,S_SOURCE_29000
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S
-     .endif     
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP0"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF0
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF0
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP1"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF1
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF1
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP2"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF2
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF2
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP3"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF3
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF3
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP4"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF4
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF4
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP5"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF5
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF5
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP6"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF6
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF6
-     .endif
-     .exitm
-   .endif
-   .ifeqs "@operand2@","FP7"
-     .set S_SOURCE,S_SOURCE_29027
-     .if ( OPERATION_TYPE == T_OPERATION )
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF7
-     .else
-       .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF7
-     .endif
-     .exitm
-   .endif
-   .err
-   .print "@operand2@ - Invalid operand"
-
- .endm        ; end of select_S_operand macro definition
-
-;
-; MACRO NAME : select_T_operand
-;
-; FUNCTION : Given an operand, determine if the operand is from the
-;            register file, and if so, set the appropriate bits in
-;            the current instruction word, to read the corresponding
-;            source into the T operand.  In addition, set the
-;            variable R_SOURCE to 0 for local register file, or 1 for
-;            floating-point register file.
-;
-; PARAMETER : operand1 - one of the possible source operands
-;
- .macro select_T_operand,operand1
-   .ifeqs "@operand1@","t0"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","t2"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","rtn0"
-     .set R_SOURCE,R_SOURCE_29000
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP0"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF0
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP1"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF1
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP2"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF2
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP3"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF3
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP4"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF4
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP5"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF5
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP6"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF6
-     .exitm
-   .endif
-   .ifeqs "@operand1@","FP7"
-     .set R_SOURCE,R_SOURCE_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF7
-     .exitm
-   .endif
-   .err
-   .print "@operand1@ - Invalid operand"
-
- .endm        ; end of select_T_operand macro definition
-
-;
-; MACRO NAME : select_destination
-;
-; FUNCTION : Given a destination, determine if the operand is from the
-;            register file, and if so, set the appropriate bits in
-;            the current instruction word.  In addition, set the
-;            variable DESTINATION to DESTINATION_29000 or
-;            DESTINATION_29027 as appropriate
-;
-; PARAMETER : destination - one of the possible destination operands
-;
- .macro select_destination,destination
-   .ifeqs "@destination@","rtn0"
-     .set DESTINATION,DESTINATION_29000
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP0"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF0
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP1"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF1
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP2"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF2
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP3"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF3
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP4"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF4
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP5"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF5
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP6"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF6
-     .exitm
-   .endif
-   .ifeqs "@destination@","FP7"
-     .set DESTINATION,DESTINATION_29027
-     .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF7
-     .exitm
-   .endif
-   .err
-   .print "@destination@ - Invalid operand"
-
- .endm        ; end of select_destination macro definition
-
-; MACRO NAME : initialize_previous_instruction
-;
-; FUNCTION : Make sure the previous instruction is defined and set to zero
-;
- .macro initialize_previous_instruction
-
-   .ifndef PREVIOUS_INSTRUCTION
-  ;
-  ; Make sure that the previous instruction variable is initialized
-  ;
-     .set PREVIOUS_INSTRUCTION,0
-   .endif
-
- .endm        ; end of initialize_previous_instruction macro definition
-
-
-; MACRO NAME : prepare_function_parameters
-;
-; FUNCTION : To place the input parameters into the correct position for
-;            use by the function body.  When the target language is
-;            FORTRAN, the values of the input arguments are read from the
-;            supplied addresses and moved to the t0-t3 temporary area.
-;            When the target language is C or Pascal, the values of the
-;            input arguments are simply moved to the t0-t3 temporary area.
-;
- .macro prepare_function_parameters,arg1,arg2
-
-   .if $narg==0
-     .err
-     .print "Missing function argument(s)"
-     .exitm
-   .endif
-
-   .if $narg>2
-     .err
-     .print "Too many function arguments
-     .exitm
-   .endif
-
-   .if $narg>=1
-     .if $isreg(@arg1)
-       .ifdef FORTRAN
-         load 0,0,t0,arg1
-         .if ( FUNCTION_TYPE == DOUBLE_FUNCTION )
-           add t1,arg1,4
-           load 0,0,t1,t1
-         .endif
-       .else
-         add t0,arg1,0
-         .if ( FUNCTION_TYPE == DOUBLE_FUNCTION )
-           add t1,%%(&arg1+1),0
-         .endif         
-       .endif
-     .else
-       .err
-       .print "Function argument not register - @arg1@"
-     .endif
-   .endif
-   .if $narg==2
-     .if $isreg (@arg2)
-       .ifdef FORTRAN
-         load 0,0,t2,arg2
-         .if ( FUNCTION_TYPE == DOUBLE_FUNCTION )
-           add t3,arg2,4
-           load 0,0,t3,t3
-         .endif
-       .else
-         add t2,arg2,0
-         .if ( FUNCTION_TYPE == DOUBLE_FUNCTION )
-           add t3,%%(&arg2+1),0
-         .endif
-       .endif
-     .else
-       .err
-       .print "Function argument not register - @arg2@"
-     .endif
-   .endif
-
- .endm ; end of prepare_function_parameters macro definition
-
-; end of smartmac.h file
diff --git a/newlib/libc/sys/a29khif/sys/sysmac.h b/newlib/libc/sys/a29khif/sys/sysmac.h
deleted file mode 100644
index 01ff9eec2..000000000
--- a/newlib/libc/sys/a29khif/sys/sysmac.h
+++ /dev/null
@@ -1,165 +0,0 @@
-; @(#)sysmac.h	1.7 90/10/14 20:56:17, Copyright 1988, 1989, 1990 AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;
-; sysmac.h
-;
-	.include	"sys/proreg.h"
-
-;	Supported system call function numbers - BSD emulation
-
-	.equ	BSD_exit,	  1
-	.equ	BSD_open,	  5
-	.equ	BSD_close,	  6
-	.equ	BSD_remove,	 10
-	.equ	BSD_lseek,	 19
-	.equ	BSD_sbrk,	 69
-	.equ	BSD_readv,	120
-	.equ	BSD_writev,	121
-	.equ	BSD_rename,	128
-;			Functions above 0x100 are handled by Am29000 code
-	.equ	BSD_alloc,	0x101
-	.equ	BSD_free,	0x102
-	.equ	BSD_getpagesize,	0x103
-
-	.equ	BSD_clock,	0x111
-
-;	Supported system call function numbers - HIF version 2.0
-
-	.equ	HIF_exit,	0x01
-
-	.equ	HIF_open,	0x11
-	.equ	HIF_close,	0x12
-	.equ	HIF_read,	0x13
-	.equ	HIF_write,	0x14
-	.equ	HIF_lseek,	0x15
-	.equ	HIF_remove,	0x16
-	.equ	HIF_rename,	0x17
-	.equ	HIF_ioctl,	0x18
-	.equ	HIF_iowait,	0x19
-	.equ	HIF_iostat,	0x1a
-
-	.equ	HIF_tmpnam,	0x21
-
-	.equ	HIF_time,	0x31
-
-	.equ	HIF_getenv,	0x41
-	.equ	HIF_gettz,	0x43
-
-	.equ	HIF_sysalloc,	0x101
-	.equ	HIF_alloc,	HIF_sysalloc	;Synonym.
-	.equ	HIF_sysfree,	0x102
-	.equ	HIF_free,	HIF_sysfree	;Synonym.
-	.equ	HIF_getpsize,	0x103
-	.equ	HIF_getpagesize,HIF_getpsize	;Synonym.
-	.equ	HIF_getargs,	0x104
-
-	.equ	HIF_clock,	0x111
-	.equ	HIF_cycles,	0x112
-
-	.equ	HIF_setvec,	0x121
-	.equ	HIF_settrap,	0x122
-	.equ	HIF_setim,	0x123
-
-	.equ	HIF_query,	0x131
-
-	.equ	HIF_signal,	0x141
-	.equ	HIF_sigdfl,	0x142
-	.equ	HIF_sigret,	0x143
-	.equ	HIF_sigrep,	0x144
-	.equ	HIF_sigskp,	0x145
-	.equ	HIF_sendsig,	0x146
-
-;Maintain compatibility with HIF 1.0 code.
-
-	.equ	EPI_exit,	HIF_exit
-
-	.equ	EPI_open,	HIF_open
-	.equ	EPI_close,	HIF_close
-	.equ	EPI_read,	HIF_read
-	.equ	EPI_write,	HIF_write
-	.equ	EPI_lseek,	HIF_lseek
-	.equ	EPI_remove,	HIF_remove
-	.equ	EPI_rename,	HIF_rename
-
-	.equ	EPI_tmpnam,	HIF_tmpnam
-
-	.equ	EPI_time,	HIF_time
-
-	.equ	EPI_getenv,	HIF_getenv
-	.equ	EPI_gettz,	HIF_gettz
-	.equ	EPI_alloc,	HIF_sysalloc
-	.equ	EPI_free,	HIF_sysfree
-	.equ	EPI_getpagesize,	HIF_getpsize
-	.equ	EPI_getargs,	HIF_getargs
-
-	.equ	EPI_clock,	HIF_clock
-	.equ	EPI_cycles,	HIF_cycles
-
-	.equ	EPI_setvec,	HIF_setvec
-
-	.equ	V_SYSCALL, 69
-
-;		System call macros
-/* Now that source files have been sed'd to avoid these macros, they
-   are just commented out.  -- gnu@cygnus.com  Oct 90 
-
-	.ifdef	_BSD_OS
-	  .equ  V_SYSCALL, 66
-	.else
-	  .equ	V_SYSCALL, 69
-	.endif
-
-	.macro  syscall, name
-	  .ifdef	_BSD_OS
-	    const	  tav, SYS_@name
-	  .else
-	    const	  tav, HIF_@name
-	  .endif
-	  asneq		V_SYSCALL, gr1, gr1
-	.endm
-
-; error return
-;   set errno to the error value in tav.
-;   return -1
-;
-	.macro  returnerr
-;;	  .extern	_errno		; rather have undef'd sym than multiple def's
-	  const		tpc, _errno
-	  consth	tpc, _errno
-	  store		0, 0, tav, tpc
-	  jmpi		lr0
-	  constn	v0, -1
-	.endm
-
-; package the most common case in one macro
-;
-	.macro  system, name
-	  syscall	name
-	  jmpti		tav, lr0
-	    returnerr
-	.endm
- */
diff --git a/newlib/libc/sys/a29khif/systime.s b/newlib/libc/sys/a29khif/systime.s
deleted file mode 100644
index 95b193360..000000000
--- a/newlib/libc/sys/a29khif/systime.s
+++ /dev/null
@@ -1,44 +0,0 @@
-; @(#)systime.s	1.2 90/10/14 21:57:59, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; _time.s
-;	time_t secs = time( time_t *secs );
-;
-;	NOTE - Will not work on BSD (no time sys call)
-;
-	.file	"systime.s"
-	.include "sys/sysmac.h"
-	.text
-	.word	0x00030000		; Debugger tag word
-	.global	_time
-_time:
-	const tav,HIF_time @ asneq V_SYSCALL,gr1,gr1
-	cpeq	gr97, lr2, 0
-	jmpti	gr97, lr0
-	nop
-	jmpi	lr0
-	store	0, 0, gr96, lr2
-	.end
diff --git a/newlib/libc/sys/a29khif/vec.s b/newlib/libc/sys/a29khif/vec.s
deleted file mode 100644
index 5a7083a3c..000000000
--- a/newlib/libc/sys/a29khif/vec.s
+++ /dev/null
@@ -1,35 +0,0 @@
-; @(#)vec.s	1.2 90/10/14 21:58:01, AMD
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright 1990 Advanced Micro Devices, Inc.
-;
-; This software is the property of Advanced Micro Devices, Inc  (AMD)  which
-; specifically  grants the user the right to modify, use and distribute this
-; software provided this notice is not removed or altered.  All other rights
-; are reserved by AMD.
-;
-; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
-; SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
-; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR
-; USE OF THIS SOFTWARE.
-;
-; So that all may benefit from your experience, please report  any  problems
-; or  suggestions about this software to the 29K Technical Support Center at
-; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131  in  the  UK,  or
-; 0031-11-1129 in Japan, toll free.  The direct dial number is 512-462-4118.
-;
-; Advanced Micro Devices, Inc.
-; 29K Support Products
-; Mail Stop 573
-; 5900 E. Ben White Blvd.
-; Austin, TX 78741
-; 800-292-9263
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-	.global	V_SPILL, V_FILL
-	.global	V_EPI_OS, V_BSD_OS
-
-	.equ	V_SPILL, 64
-	.equ	V_FILL, 65
-
-	.equ	V_BSD_OS, 66
-	.equ	V_EPI_OS, 69
-	.end
diff --git a/newlib/libc/sys/aclocal.m4 b/newlib/libc/sys/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/arc/Makefile.am b/newlib/libc/sys/arc/Makefile.am
deleted file mode 100644
index 7ef026eae..000000000
--- a/newlib/libc/sys/arc/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = isatty.c mem-layout.c sbrk.c syscalls.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/arc/Makefile.in b/newlib/libc/sys/arc/Makefile.in
deleted file mode 100644
index 618f7b98f..000000000
--- a/newlib/libc/sys/arc/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = isatty.c mem-layout.c sbrk.c syscalls.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  isatty.o mem-layout.o sbrk.o syscalls.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/arc/aclocal.m4 b/newlib/libc/sys/arc/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/arc/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/arc/configure b/newlib/libc/sys/arc/configure
deleted file mode 100755
index 511040094..000000000
--- a/newlib/libc/sys/arc/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=isatty.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/arc/configure.in b/newlib/libc/sys/arc/configure.in
deleted file mode 100644
index f715b1edd..000000000
--- a/newlib/libc/sys/arc/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/arc configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(isatty.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/arc/crt0.S b/newlib/libc/sys/arc/crt0.S
deleted file mode 100644
index 346339774..000000000
--- a/newlib/libc/sys/arc/crt0.S
+++ /dev/null
@@ -1,75 +0,0 @@
-; ARC start up file
-; In the absence of a custom linker script, go with something simple.
-; We do not support passing arguments to "main", but this is an embedded
-; system anyway.
-;
-; We call init/fini here without cpu prefixes because there is always
-; only one .init/.fini section per image.
-
-	.section .text
-	.align 4
-
-	.global	start
-start:
-
-	mov	sp,end		; Round "sp" up to page after "end".
-	add	sp,sp,4095
-	and	sp,sp,-4096
-
-	ld	r8,[stack_size]	; Add stack size to "sp".
-	add	sp,sp,r8
-
-	st	sp,[sbrk_start]	; Initialize malloc heap.
-	st	sp,[sbrk_loc]
-
-	sub	sp,sp,16	; callee expects 16 bytes already "pushed".
-	mov	fp,0		; Top of stack frame indicator.
-
-	mov	r0,edata	; Zero bss.
-	mov	r2,end
-	sub	r2,r2,r0
-	mov	r1,0
-
-#ifdef __base__
-	bl.nd	_memset
-	bl.nd	init		; .init section entry point.
-	mov	r0,%st(fini)	; .fini section entry point.
-	bl.nd	_atexit
-	mov	r0,0		; argc
-	mov	r1,0		; argv
-	bl.nd	_main
-	bl.nd	_exit
-#endif
-
-#ifdef __host__
-	bl.nd	_host_memset
-	bl.nd	init		; .init section entry point.
-	mov	r0,%st(fini)	; .fini section entry point.
-	bl.nd	_host_atexit
-	mov	r0,0		; argc
-	mov	r1,0		; argv
-	bl.nd	_host_main
-	bl.nd	_host_exit
-#endif
-
-#ifdef __graphics__
-	bl.nd	_graphics_memset
-	bl.nd	init		; .init section entry point.
-	mov	r0,%st(fini)	; .fini section entry point.
-	bl.nd	_graphics_atexit
-	mov	r0,0		; argc
-	mov	r1,0		; argv
-	bl.nd	_graphics_main
-	bl.nd	_graphics_exit
-#endif
-
-#ifdef __audio__
-	bl.nd	_audio_memset
-	bl.nd	init		; .init section entry point.
-	mov	r0,%st(fini)	; .fini section entry point.
-	bl.nd	_audio_atexit
-	mov	r0,0		; argc
-	mov	r1,0		; argv
-	bl.nd	_audio_main
-	bl.nd	_audio_exit
-#endif
diff --git a/newlib/libc/sys/arc/isatty.c b/newlib/libc/sys/arc/isatty.c
deleted file mode 100644
index 3c64647a9..000000000
--- a/newlib/libc/sys/arc/isatty.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* isatty.c */
-
-/* Dumb implementation so programs will at least run.  */
-
-#include <sys/stat.h>
-
-int
-isatty (int fd)
-{
-  struct stat buf;
-
-  if (fstat (fd, &buf) < 0)
-    return 0;
-  if (S_ISCHR (buf.st_mode))
-    return 1;
-  return 0;
-}
diff --git a/newlib/libc/sys/arc/mem-layout.c b/newlib/libc/sys/arc/mem-layout.c
deleted file mode 100644
index e9c215220..000000000
--- a/newlib/libc/sys/arc/mem-layout.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Ideally this kind of stuff is specified in a linker script.  It's not clear
-   what the default linker script should do, so for now we have this.  */
-
-/* Keep this file separate from sbrk.c so the programmer can supply his/her
-   own _sbrk_r.  This file could go in crt0.S, but I want to keep this in C.
-   This is all just an experiment anyway.  */
-
-#ifndef STACK_SIZE
-/* Cache lines recycle at 4096 I think, and 4096 is listed as the page size,
-   so we make the stack size a multiple of it.  Not that it's relevant or
-   anything, but why not base it on *something*?  */
-#define STACK_SIZE (4096 * 4)
-#endif
-
-int stack_size asm ("stack_size") = STACK_SIZE;
-
-#ifndef SBRK_SIZE
-#define SBRK_SIZE (4096 * 32)
-#endif
-
-int sbrk_size asm ("sbrk_size") = SBRK_SIZE;
diff --git a/newlib/libc/sys/arc/sbrk.c b/newlib/libc/sys/arc/sbrk.c
deleted file mode 100644
index 9f863cded..000000000
--- a/newlib/libc/sys/arc/sbrk.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* sbrk support */
-
-/* The current plan is to have one sbrk handler for all cpus.
-   Hence use `asm' for each global variable here to avoid the cpu prefix.
-   We can't intrude on the user's namespace (another reason to use asm).  */
-
-#include <sys/types.h>
-#include <sys/syscall.h>
-#include <errno.h>
-#include <stddef.h>
-
-/* These variables are publicly accessible for debugging purposes.
-   The user is also free to set sbrk_size to something different.
-   See mem-layout.c.  */
-
-extern int sbrk_size asm ("sbrk_size");
-
-caddr_t sbrk_start asm ("sbrk_start");
-caddr_t sbrk_loc asm ("sbrk_loc");
-
-/*caddr_t _sbrk_r (struct _reent *, size_t) asm ("__sbrk_r");*/
-
-/* FIXME: We need a semaphore here.  */
-
-caddr_t
-_sbrk_r (struct _reent *r, size_t nbytes)
-{
-  caddr_t result;
-
-  if (
-      /* Ensure we don't underflow.  */
-      sbrk_loc + nbytes < sbrk_start
-      /* Ensure we don't overflow.  */
-      || sbrk_loc + nbytes > sbrk_start + sbrk_size)
-    {
-      errno = ENOMEM;
-      return ((caddr_t) -1);
-    }
-
-  result = sbrk_loc;
-  sbrk_loc += nbytes;
-  return result;
-}
diff --git a/newlib/libc/sys/arc/sys/syscall.h b/newlib/libc/sys/arc/sys/syscall.h
deleted file mode 100644
index b5d8aa2e1..000000000
--- a/newlib/libc/sys/arc/sys/syscall.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* ARC system call interface */
-
-/* A special version of the flag insn is used to distinguish syscalls from
-   breakpoints (a breakpoint might be set at the same place).
-
-   The upper 23 bits of the argument to a flag insn are not currently used.
-   By convention, bit 31 is one to indicate this is a specially coded operand.
-   The next 15 bits (bits 30-16) can be used for software purposes.
-   The format isn't documented yet, so the pattern we use here may change.  */
-
-#define SYSCALL_MARKER 0x80010000
-#define SYSCALL_MAGIC 0x61082300
-
-/* Perform a system call.
-
-   If ERR is 0, it succeeded.  Otherwise it is a positive value for errno.  */
-
-#define SYSCALL(op, rc, err, r0, r1, r2) \
-asm volatile ( "\
-	      mov r0,%2\n\t \
-	      mov r1,%3\n\t \
-	      mov r2,%4\n\t \
-	      mov r3,%5\n\t \
-	      mov r4,%6\n\t \
-	      flag %7\n\t \
-	      nop\n\t \
-	      nop\n\t \
-	      nop\n\t \
-	      mov %0,r0\n\t \
-	      mov %1,r1" \
-	      : "=r" (rc), "=r" (err) \
-	      : "i" (SYSCALL_MAGIC), "r" (op), "r" (r0), "r" (r1), "r" (r2), \
-	        "i" (1 | SYSCALL_MARKER) \
-	      : "r0", "r1", "r2", "r3", "r4");
-
-#define	SYS_exit	1
-#define	SYS_open	2
-#define	SYS_close	3
-#define	SYS_read	4
-#define	SYS_write	5
-#define	SYS_lseek	6
-#define	SYS_link	7
-#define	SYS_unlink	8
-#define	SYS_chdir	9
-#define	SYS_chmod	10
-#define SYS_stat	11
-#define SYS_fstat	12
-#define SYS_access	13
-#define	SYS_getpid	14
-#define SYS_kill	15
-#define SYS_time	16
-
-#define SYS_MAX		17
diff --git a/newlib/libc/sys/arc/syscalls.c b/newlib/libc/sys/arc/syscalls.c
deleted file mode 100644
index 107989b00..000000000
--- a/newlib/libc/sys/arc/syscalls.c
+++ /dev/null
@@ -1,130 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/syscall.h>
-#include <_ansi.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <reent.h>
-
-_ssize_t
-_read_r (struct _reent *r, int fd, void *buf, size_t nbytes)
-{
-  int err;
-  _ssize_t rc;
-
-  SYSCALL (SYS_read, rc, err, fd, buf, nbytes);
-  if (err)
-    errno = err;
-  return rc;
-}
-
-_ssize_t
-_write_r (struct _reent *r, int fd, const void *buf, size_t nbytes)
-{
-  int err;
-  _ssize_t rc;
-
-  SYSCALL (SYS_write, rc, err, fd, buf, nbytes);
-  if (err)
-    errno = err;
-  return rc;
-}
-
-/* FIXME: The prototype in <fcntl.h> for open() uses ...,
-   but reent.h uses int.  */
-
-int
-_open_r (struct _reent *r, const char *buf, int flags, int mode)
-{
-  int rc,err;
-#if 0
-  int mode;
-  va_list ap;
-
-  va_start (ap, flags);
-  mode = va_arg (ap, int);
-  va_end (ap);
-#endif
-
-  SYSCALL (SYS_open, rc, err, buf, flags, mode);
-  errno = err;
-  return rc;
-}
-
-int
-_close_r (struct _reent *r, int fd)
-{
-  int rc,err;
-
-  SYSCALL (SYS_close, rc, err, fd, 0, 0);
-  if (err)
-    errno = err;
-  return rc;
-}
-
-off_t
-_lseek_r (struct _reent *r, int fd,  off_t offset, int whence)
-{
-  int err;
-  off_t rc;
-
-  SYSCALL (SYS_lseek, rc, err, fd, offset, whence);
-  if (err)
-    errno = err;
-  return rc;
-}
-
-int
-_fstat_r (struct _reent *r, int fd, struct stat *buf)
-{
-  int rc,err;
-
-  SYSCALL (SYS_fstat, rc, err, fd, buf, 0);
-  if (err)
-    errno = err;
-  return rc;
-}
-
-/* FIXME: Shouldn't this be _exit_r?  */
-
-void
-_exit (int ret)
-{
-  int rc,err;
-
-  SYSCALL (SYS_exit, rc, err, ret, 0, 0);
-
-  /* If that failed, use an infinite loop.  */
-  while (1)
-    continue;
-}
-
-time_t
-_time (time_t *timer)
-{
-  return 0;
-}
-
-int
-_creat_r (struct _reent *r, const char *path, int mode)
-{
-  return _open_r (r, path, O_CREAT | O_TRUNC, mode);
-}
-
-int
-_getpid_r (struct _reent *r)
-{
-  return 42;
-}
-
-int
-_kill_r (struct _reent *r, int pid, int sig)
-{
-  int rc,err;
-
-  SYSCALL (SYS_kill, rc, err, pid, sig, 0);
-  if (err)
-    errno = err;
-  return rc;
-}
diff --git a/newlib/libc/sys/arm/Makefile.am b/newlib/libc/sys/arm/Makefile.am
deleted file mode 100644
index b329e431c..000000000
--- a/newlib/libc/sys/arm/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-if MAY_SUPPLY_SYSCALLS
-extra_objs = syscalls.o
-else
-extra_objs =
-endif
-
-lib_a_SOURCES = access.c libcfunc.c trap.S setjmp.S
-lib_a_LIBADD = $(extra_objs)
-lib_a_DEPENDENCIES = $(extra_objs)
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/arm/Makefile.in b/newlib/libc/sys/arm/Makefile.in
deleted file mode 100644
index d0244de3b..000000000
--- a/newlib/libc/sys/arm/Makefile.in
+++ /dev/null
@@ -1,332 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-@MAY_SUPPLY_SYSCALLS_TRUE@extra_objs = @MAY_SUPPLY_SYSCALLS_TRUE@syscalls.o
-@MAY_SUPPLY_SYSCALLS_FALSE@extra_objs = 
-
-lib_a_SOURCES = access.c libcfunc.c trap.S setjmp.S
-lib_a_LIBADD = $(extra_objs)
-lib_a_DEPENDENCIES = $(extra_objs)
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_OBJECTS =  access.o libcfunc.o trap.o setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/arm/access.c b/newlib/libc/sys/arm/access.c
deleted file mode 100644
index 8e08b3a7f..000000000
--- a/newlib/libc/sys/arm/access.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* This is file ACCESS.C */
-/*
- * Copyright (C) 1993 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-int access(const char *fn, int flags)
-{
-  struct stat s;
-  if (stat(fn, &s))
-    return -1;
-  if (s.st_mode & S_IFDIR)
-    return 0;
-  if (flags & W_OK)
-  {
-    if (s.st_mode & S_IWRITE)
-      return 0;
-    return -1;
-  }
-  return 0;
-}
-	
diff --git a/newlib/libc/sys/arm/aclocal.m4 b/newlib/libc/sys/arm/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/arm/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/arm/configure b/newlib/libc/sys/arm/configure
deleted file mode 100755
index 47518f3c9..000000000
--- a/newlib/libc/sys/arm/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=trap.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/arm/configure.in b/newlib/libc/sys/arm/configure.in
deleted file mode 100644
index eeac4889f..000000000
--- a/newlib/libc/sys/arm/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/arm configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(trap.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S
deleted file mode 100644
index 3ebb5f7fe..000000000
--- a/newlib/libc/sys/arm/crt0.S
+++ /dev/null
@@ -1,267 +0,0 @@
-#include "swi.h"
-
-/* ANSI concatenation macros.  */
-#define CONCAT(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-#ifdef __USER_LABEL_PREFIX__
-#define FUNCTION( name ) CONCAT (__USER_LABEL_PREFIX__, name)
-#else
-#error __USER_LABEL_PREFIX is not defined
-#endif
-
-/* .text is used instead of .section .text so it works with arm-aout too.  */
-	.text
-	.code 32
-	.align 	0
-
-	.global	_mainCRTStartup
-	.global	_start
-	.global	start
-start:
-_start:
-_mainCRTStartup:
-
-/* Start by setting up a stack */
-#ifdef ARM_RDP_MONITOR
-	/*  Issue Demon SWI to read stack info */
-	swi	SWI_GetEnv	/*  Returns command line in r0 */
-	mov	sp,r1		/*  and the highest memory address in r1 */
-	ldr	sl, .LC2	/*  stack limit is at end of data */
-	add	sl, sl, #256	/*  allow slop for stack overflow handling */
-				/*  and small frames */
-#else
-#ifdef ARM_RDI_MONITOR
-	/*  Issue Angel SWI to read stack info */
-	mov	r0, #AngelSWI_Reason_HeapInfo
-	adr	r1, .LC0	/*  point at ptr to 4 words to receive data */
-	swi	AngelSWI_ARM	/*  We are always in ARM mode for startup */
-	ldr	r0, .LC0	/*  point at values read */
-	ldr	sp, [r0, #8]
-	ldr	sl, [r0, #12]
-	add	sl, sl, #256	/*  allow slop for stack overflow handling */
-				/*  and small frames */
-#else
-	/*  Set up the stack pointer to a fixed value */
-	ldr	r3, .LC0
-	mov 	sp, r3
-	/* Setup a default stack-limit in-case the code has been
-	   compiled with "-mapcs-stack-check".  Hard-wiring this value
-	   is not ideal, since there is currently no support for
-	   checking that the heap and stack have not collided, or that
-	   this default 64k is enough for the program being executed.
-	   However, it ensures that this simple crt0 world will not
-	   immediately cause an overflow event:  */
-	sub	sl, sp, #64 << 10	/* Still assumes 256bytes below sl */
-#endif
-#endif
-	/* Zero the memory in the .bss section.  */
-	mov 	a2, #0			/* Second arg: fill value */
-	mov	fp, a2			/* Null frame pointer */
-	mov	r7, a2			/* Null frame pointer for Thumb */
-	
-	ldr	a1, .LC1		/* First arg: start of memory block */
-	ldr	a3, .LC2	
-	sub	a3, a3, a1		/* Third arg: length of block */
-	
-
-#ifdef __thumb__		/* Enter Thumb mode.... */
-
-	add	a4, pc, #1	/* Get the address of the Thumb block */
-	bx	a4		/* Go there and start Thumb decoding  */
-
-	.code 16
-	.global __change_mode
-	.thumb_func
-__change_mode:	
-#endif
-	
-	bl	FUNCTION (memset)
-#if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR)
-	mov	r0, #0		/*  no arguments  */
-	mov	r1, #0		/*  no argv either */
-#else
-	/* Need to set up standard file handles */
-	bl	FUNCTION (initialise_monitor_handles)
-	
-#ifdef ARM_RDP_MONITOR
-	swi	SWI_GetEnv	/*  sets r0 to point to the command line */
-	mov	r1, r0
-#else
-	mov	r0, #AngelSWI_Reason_GetCmdLine
-	adr	r1, .LC30	/*  Space for command line */
-	swi	AngelSWI
-	ldr	r1, .LC30
-#endif
-	/*  Parse string at r1 */
-	mov	r0, #0		/*  count of arguments so far */
-	/* Push a NULL argument onto the end of the list.  */
-#ifdef __thumb__
-	push	{r0}
-#else
-	stmfd	sp!, {r0}
-#endif
-.LC10:
-/*  Skip leading blanks */
-#ifdef __thumb__
-	ldrb	r3, [r1]
-	add	r1, #1
-#else
-	ldrb	r3, [r1], #1
-#endif
-	cmp	r3, #0
-	beq	.LC12
-	cmp	r3, #' '
-	beq	.LC10
-
-/*  See whether we are scanning a string */
-	cmp	r3, #'"'
-#ifdef __thumb__
-	beq	.LC20
-	cmp	r3, #'\''
-	bne	.LC21
-.LC20:
-	mov	r2, r3
-	b	.LC22
-
-.LC21:
-	mov	r2, #' '	/*  terminator type */
-	sub	r1, r1, #1	/*  adjust back to point at start char */
-.LC22:
-#else
-	cmpne	r3, #'\''
-	moveq	r2, r3
-	movne	r2, #' '	/*  terminator type */
-	subne	r1, r1, #1	/*  adjust back to point at start char */
-#endif
-
-/*  Stack a pointer to the current argument */
-#ifdef __thumb__
-	push	{r1}
-#else
-	stmfd	sp!, {r1}
-#endif
-	add	r0, r0, #1
-.LC11:
-#ifdef __thumb__
-	ldrb	r3, [r1]
-	add	r1, #1
-#else
-	ldrb	r3, [r1], #1
-#endif
-	cmp	r3, #0
-	beq	.LC12
-	cmp	r2, r3		/*  reached terminator? */
-	bne	.LC11
-	mov	r2, #0
-	sub	r3, r1, #1
-	strb	r2, [r3]	/*  terminate the arg string */
-	b	.LC10
-
-.LC12:
-	mov	r1, sp		/*  point at stacked arg pointers */
-	/* We've now got the stacked args in order reverse the */
-#ifdef __thumb__
-	mov	r2, r0
-	lsl	r2, #2
-	add	r2, sp
-	mov	r3, sp
-.LC15:	cmp	r2, r3
-	bls	.LC14
-	sub	r2, #4
-	ldr	r4, [r2]
-	ldr	r5, [r3]
-	str	r5, [r2]
-	str	r4, [r3]
-	add	r3, #4
-	b	.LC15
-.LC14:	
-#else
-	add	r2, sp, r0, LSL #2	/* End of args */
-	mov	r3, sp			/* Start of args */
-.LC13:	cmp	r2, r3
-	ldrhi	r4,[r2, #-4]		/* Reverse ends of list */
-	ldrhi	r5, [r3]
-	strhi	r5, [r2, #-4]!
-	strhi	r4, [r3], #4
-	bhi	.LC13
-#endif
-#endif
-
-#ifdef __USES_INITFINI__
-	/* Some arm/elf targets use the .init and .fini sections
-	   to create constructors and destructors, and for these
-	   targets we need to call the _init function and arrange
-	   for _fini to be called at program exit.  */
-	mov	r4, r0
-	mov	r5, r1
-	ldr	r0, .Lfini
-	bl	FUNCTION (atexit)
-	bl	FUNCTION (_init)
-	mov	r0, r4
-	mov	r1, r5
-#endif	
-	bl	FUNCTION (main)
-
-	bl	FUNCTION (exit)		/* Should not return.  */
-
-#ifdef __thumb__
-	/* Come out of Thumb mode.  This code should be redundant.  */
-
-	mov	a4, pc
-	bx	a4
-
-	.code 32
-	.global change_back
-change_back:
-	/* Halt the execution.  This code should never be executed.  */
-	/* With no debug monitor, this probably aborts (eventually).
-	   With a Demon debug monitor, this halts cleanly.
-	   With an Angel debug monitor, this will report 'Unknown SWI'.	 */
-	swi	SWI_Exit
-#endif
-	
-	/* For Thumb, constants must be after the code since only 
-	   positive offsets are supported for PC relative addresses.  */
-	
-	.align 0
-.LC0:
-#ifdef ARM_RDI_MONITOR
-	.word	HeapBase
-#else
-#ifndef ARM_RDP_MONITOR
-#ifdef __pe__
-	.word	0x800000
-#else
-/*	.word	0x80000	*/		/* Top of RAM on the PIE board.  */
-#endif
-#endif
-#endif
-.LC1:
-	.word	__bss_start__
-.LC2:
-	.word	__bss_end__
-#ifdef __USES_INITFINI__
-.Lfini:
-	.word	FUNCTION(_fini)
-#endif
-#ifdef ARM_RDI_MONITOR
-.LC30:
-	.word	CommandLine
-	.word	255
-
-/*  Workspace for Angel calls.  */
-	.data
-/*  Data returned by monitor SWI.  */
-.global	__stack_base__
-HeapBase:	.word	0
-HeapLimit:	.word	0
-__stack_base__:	.word	0
-StackLimit:	.word	0
-CommandLine:	.space	256,0	/*  Maximum length of 255 chars handled.  */
-#endif
-	
-#ifdef __pe__
-	.section .idata$3
-	.long	0,0,0,0,0,0,0,0
-#endif
diff --git a/newlib/libc/sys/arm/libcfunc.c b/newlib/libc/sys/arm/libcfunc.c
deleted file mode 100644
index ddc611f34..000000000
--- a/newlib/libc/sys/arm/libcfunc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Support files for GNU libc.  Files in the C namespace go here.
-   Files in the system namespace (ie those that start with an underscore)
-   go in syscalls.c.
-   
-   Note: These functions are in a seperate file so that OS providers can
-   overrride the system call stubs (defined in syscalls.c) without having
-   to provide libc funcitons as well.  */
-#include "swi.h"
-
-#ifdef ARM_RDI_MONITOR
-
-static inline int
-do_AngelSWI (int reason, void * arg)
-{
-  int value;
-  asm volatile ("mov r0, %1; mov r1, %2; swi %a3; mov %0, r0"
-       : "=r" (value) /* Outputs */
-       : "r" (reason), "r" (arg), "i" (AngelSWI) /* Inputs */
-       : "r0", "r1", "lr"
-		/* Clobbers r0 and r1, and lr if in supervisor mode */);
-  return value;
-}
-#endif /* ARM_RDI_MONITOR */
-
-
-void
-abort (void)
-{
-#ifdef ARM_RDI_MONITOR
-  do_AngelSWI (AngelSWI_Reason_ReportException,
-	      (void *) ADP_Stopped_RunTimeError);
-#else
- asm ("mov r0,#17\nswi %a0" :: "i" (SWI_Exit));
-#endif
-}
-
-void
-alarm (void)
-{
-}
diff --git a/newlib/libc/sys/arm/setjmp.S b/newlib/libc/sys/arm/setjmp.S
deleted file mode 100644
index d37486090..000000000
--- a/newlib/libc/sys/arm/setjmp.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/* This is a simple version of setjmp and longjmp.
-
-   Nick Clifton, Cygnus Solutions, 13 June 1997.  */
-
-/* ANSI concatenation macros.  */
-#define CONCAT(a, b)  CONCAT2(a, b)
-#define CONCAT2(a, b) a##b
-
-#ifndef __USER_LABEL_PREFIX__
-#error  __USER_LABEL_PREFIX__ not defined
-#endif
-
-#define SYM(x) CONCAT (__USER_LABEL_PREFIX__, x)
-
-#ifdef __ELF__
-#define TYPE(x) .type SYM(x),function
-#define SIZE(x) .size SYM(x), . - SYM(x)
-#else
-#define TYPE(x)
-#define SIZE(x)
-#endif
-
-/* Arm/Thumb interworking support:
-
-   The interworking scheme expects functions to use a BX instruction
-   to return control to their parent.  Since we need this code to work
-   in both interworked and non-interworked environments as well as with
-   older processors which do not have the BX instruction we do the 
-   following:
-	Test the return address.
-	If the bottom bit is clear perform an "old style" function exit.
-	(We know that we are in ARM mode and returning to an ARM mode caller).
-	Otherwise use the BX instruction to perform the function exit.
-
-   We know that we will never attempt to perform the BX instruction on 
-   an older processor, because that kind of processor will never be 
-   interworked, and a return address with the bottom bit set will never 
-   be generated.
-
-   In addition, we do not actually assemble the BX instruction as this would
-   require us to tell the assembler that the processor is an ARM7TDMI and
-   it would store this information in the binary.  We want this binary to be
-   able to be linked with binaries compiled for older processors however, so
-   we do not want such information stored there.  
-
-   If we are running using the APCS-26 convention however, then we never
-   test the bottom bit, because this is part of the processor status.  
-   Instead we just do a normal return, since we know that we cannot be 
-   returning to a Thumb caller - the Thumb does not support APCS-26.
-	
-   Function entry is much simpler.  If we are compiling for the Thumb we 
-   just switch into ARM mode and then drop through into the rest of the
-   function.  The function exit code will take care of the restore to
-   Thumb mode.  */
-
-#ifdef __APCS_26__
-#define RET	movs		pc, lr
-#else
-#define RET	tst		lr, #1; \
-	        moveq		pc, lr ; \
-.word           0xe12fff1e	/* bx lr */
-#endif
-
-#ifdef __thumb__
-#define	MODE		.thumb_func
-.macro PROLOGUE name
-	.code 16
-	bx	pc
-	nop	
-	.code 32
-SYM (.arm_start_of.\name):
-.endm
-#else
-#define	MODE		.code 32
-.macro PROLOGUE name
-.endm
-#endif
-	
-.macro FUNC_START name
-	.text
-	.align 2
-	MODE
-	.globl SYM (\name)
-	TYPE (\name)
-SYM (\name):
-	PROLOGUE \name
-.endm
-
-.macro FUNC_END name
-	RET
-	SIZE (\name)
-.endm
-	
-/* --------------------------------------------------------------------
-                 int setjmp (jmp_buf); 
-   -------------------------------------------------------------------- */
-	
-	FUNC_START setjmp
-
-	/* Save all the callee-preserved registers into the jump buffer.  */
-	stmea		a1!, { v1-v7, fp, ip, sp, lr }
-	
-#if 0	/* Simulator does not cope with FP instructions yet.  */
-#ifndef __SOFTFP__
-	/* Save the floating point registers.  */
-	sfmea		f4, 4, [a1]
-#endif
-#endif		
-	/* When setting up the jump buffer return 0.  */
-	mov		a1, #0
-
-	FUNC_END setjmp
-	
-/* --------------------------------------------------------------------
-		volatile void longjmp (jmp_buf, int);
-   -------------------------------------------------------------------- */
-	
-	FUNC_START longjmp
-
-	/* If we have stack extension code it ought to be handled here.  */
-	
-	/* Restore the registers, retrieving the state when setjmp() was called.  */
-	ldmfd		a1!, { v1-v7, fp, ip, sp, lr }
-	
-#if 0	/* Simulator does not cope with FP instructions yet.  */
-#ifndef __SOFTFP__
-	/* Restore floating point registers as well.  */
-	lfmfd		f4, 4, [a1]
-#endif
-#endif	
-	/* Put the return value into the integer result register.
-	   But if it is zero then return 1 instead.  */	
-	movs		a1, a2
-	moveq		a1, #1
-
-	FUNC_END longjmp
-
diff --git a/newlib/libc/sys/arm/swi.h b/newlib/libc/sys/arm/swi.h
deleted file mode 100644
index 15c3866a1..000000000
--- a/newlib/libc/sys/arm/swi.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SWI numbers for RDP (Demon) monitor.  */
-#define SWI_WriteC                 0x0
-#define SWI_Write0                 0x2
-#define SWI_ReadC                  0x4
-#define SWI_CLI                    0x5
-#define SWI_GetEnv                 0x10
-#define SWI_Exit                   0x11
-#define SWI_EnterOS                0x16
-
-#define SWI_GetErrno               0x60
-#define SWI_Clock                  0x61
-#define SWI_Time                   0x63
-#define SWI_Remove                 0x64
-#define SWI_Rename                 0x65
-#define SWI_Open                   0x66
-
-#define SWI_Close                  0x68
-#define SWI_Write                  0x69
-#define SWI_Read                   0x6a
-#define SWI_Seek                   0x6b
-#define SWI_Flen                   0x6c
-
-#define SWI_IsTTY                  0x6e
-#define SWI_TmpNam                 0x6f
-#define SWI_InstallHandler         0x70
-#define SWI_GenerateError          0x71
-
-
-/* Now the SWI numbers and reason codes for RDI (Angel) monitors.  */
-#define AngelSWI_ARM 			0x123456
-#ifdef __thumb__
-#define AngelSWI 			0xAB
-#else
-#define AngelSWI 			AngelSWI_ARM
-#endif
-
-/* The reason codes:  */
-#define AngelSWI_Reason_Open		0x01
-#define AngelSWI_Reason_Close		0x02
-#define AngelSWI_Reason_WriteC		0x03
-#define AngelSWI_Reason_Write0		0x04
-#define AngelSWI_Reason_Write		0x05
-#define AngelSWI_Reason_Read		0x06
-#define AngelSWI_Reason_ReadC		0x07
-#define AngelSWI_Reason_IsTTY		0x09
-#define AngelSWI_Reason_Seek		0x0A
-#define AngelSWI_Reason_FLen		0x0C
-#define AngelSWI_Reason_TmpNam		0x0D
-#define AngelSWI_Reason_Remove		0x0E
-#define AngelSWI_Reason_Rename		0x0F
-#define AngelSWI_Reason_Clock		0x10
-#define AngelSWI_Reason_Time		0x11
-#define AngelSWI_Reason_System		0x12
-#define AngelSWI_Reason_Errno		0x13
-#define AngelSWI_Reason_GetCmdLine 	0x15
-#define AngelSWI_Reason_HeapInfo 	0x16
-#define AngelSWI_Reason_EnterSVC 	0x17
-#define AngelSWI_Reason_ReportException 0x18
-#define ADP_Stopped_ApplicationExit 	((2 << 16) + 38)
-#define ADP_Stopped_RunTimeError 	((2 << 16) + 35)
diff --git a/newlib/libc/sys/arm/sys/param.h b/newlib/libc/sys/arm/sys/param.h
deleted file mode 100644
index adc066e9a..000000000
--- a/newlib/libc/sys/arm/sys/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* ARM configuration file; HZ is 100 rather than the default 60 */
-
-#ifndef _SYS_PARAM_H
-# define _SYS_PARAM_H
-
-# define HZ (100)
-# define NOFILE	(60)
-# define PATHSIZE (1024)
-
-#define BIG_ENDIAN      4321
-#define LITTLE_ENDIAN   1234
-
-#ifdef __ARMEB__
-#define BYTE_ORDER BIG_ENDIAN
-#else
-#define BYTE_ORDER LITTLE_ENDIAN
-#endif
-
-#endif
diff --git a/newlib/libc/sys/arm/syscalls.c b/newlib/libc/sys/arm/syscalls.c
deleted file mode 100644
index 6b08c3ec3..000000000
--- a/newlib/libc/sys/arm/syscalls.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/* Support files for GNU libc.  Files in the system namespace go here.
-   Files in the C namespace (ie those that do not start with an
-   underscore) go in .c.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/fcntl.h>
-#include <stdio.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/times.h>
-#include <errno.h>
-#include <reent.h>
-#include "swi.h"
-
-/* Forward prototypes.  */
-int     _system     _PARAMS ((const char *));
-int     _rename     _PARAMS ((const char *, const char *));
-int     isatty		_PARAMS ((int));
-clock_t _times		_PARAMS ((struct tms *));
-int     _gettimeofday	_PARAMS ((struct timeval *, struct timezone *));
-void    _raise 		_PARAMS ((void));
-int     _unlink		_PARAMS ((void));
-int     _link 		_PARAMS ((void));
-int     _stat 		_PARAMS ((const char *, struct stat *));
-int     _fstat 		_PARAMS ((int, struct stat *));
-caddr_t _sbrk		_PARAMS ((int));
-int     _getpid		_PARAMS ((int));
-int     _kill		_PARAMS ((int, int));
-void    _exit		_PARAMS ((int));
-int     _close		_PARAMS ((int));
-int     _swiclose	_PARAMS ((int));
-int     _open		_PARAMS ((const char *, int, ...));
-int     _swiopen	_PARAMS ((const char *, int));
-int     _write 		_PARAMS ((int, char *, int));
-int     _swiwrite	_PARAMS ((int, char *, int));
-int     _lseek		_PARAMS ((int, int, int));
-int     _swilseek	_PARAMS ((int, int, int));
-int     _read		_PARAMS ((int, char *, int));
-int     _swiread	_PARAMS ((int, char *, int));
-void    initialise_monitor_handles _PARAMS ((void));
-
-static int	wrap		_PARAMS ((int));
-static int	error		_PARAMS ((int));
-static int	get_errno	_PARAMS ((void));
-static int	remap_handle	_PARAMS ((int));
-static int	do_AngelSWI	_PARAMS ((int, void *));
-static int 	findslot	_PARAMS ((int));
-
-/* Register name faking - works in collusion with the linker.  */
-register char * stack_ptr asm ("sp");
-
-
-/* following is copied from libc/stdio/local.h to check std streams */
-extern void   _EXFUN(__sinit,(struct _reent *));
-#define CHECK_INIT(fp) \
-  do                                    \
-    {                                   \
-      if ((fp)->_data == 0)             \
-        (fp)->_data = _REENT;           \
-      if (!(fp)->_data->__sdidinit)     \
-        __sinit ((fp)->_data);          \
-    }                                   \
-  while (0)
-
-/* Adjust our internal handles to stay away from std* handles.  */
-#define FILE_HANDLE_OFFSET (0x20)
-
-static int std_files_checked;
-static int monitor_stdin;
-static int monitor_stdout;
-static int monitor_stderr;
-
-/* Struct used to keep track of the file position, just so we
-   can implement fseek(fh,x,SEEK_CUR).  */
-typedef struct
-{
-  int handle;
-  int pos;
-}
-poslog;
-
-#define MAX_OPEN_FILES 20
-static poslog openfiles [MAX_OPEN_FILES];
-
-static int
-findslot (int fh)
-{
-  int i;
-  for (i = 0; i < MAX_OPEN_FILES; i ++)
-    if (openfiles[i].handle == fh)
-      break;
-  return i;
-}
-
-#ifdef ARM_RDI_MONITOR
-
-static inline int
-do_AngelSWI (int reason, void * arg)
-{
-  int value;
-  asm volatile ("mov r0, %1; mov r1, %2; swi %a3; mov %0, r0"
-       : "=r" (value) /* Outputs */
-       : "r" (reason), "r" (arg), "i" (AngelSWI) /* Inputs */
-       : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"
-		/* Clobbers r0 and r1, and lr if in supervisor mode */);
-                /* Accordingly to page 13-77 of ARM DUI 0040D other registers
-                   can also be clobbered.  Some memory positions may also be
-                   changed by a system call, so they should not be kept in
-                   registers. Note: we are assuming the manual is right and
-                   Angel is respecting the APCS.  */
-  return value;
-}
-#endif /* ARM_RDI_MONITOR */
-
-/* Function to convert std(in|out|err) handles to internal versions.  */
-static int
-remap_handle (int fh)
-{
-  if (!std_files_checked)
-    {
-       CHECK_INIT(stdin);
-       CHECK_INIT(stdout);
-       CHECK_INIT(stderr);
-       std_files_checked = 1;
-    }
-  if (fh == __sfileno (stdin))
-    return monitor_stdin;
-  if (fh == __sfileno (stdout))
-    return monitor_stdout;
-  if (fh == __sfileno (stderr))
-    return monitor_stderr;
-
-  return fh - FILE_HANDLE_OFFSET;
-}
-
-void
-initialise_monitor_handles (void)
-{
-  int i;
-  
-#ifdef ARM_RDI_MONITOR
-  int volatile block[3];
-  
-  block[0] = (int) ":tt";
-  block[2] = 3;     /* length of filename */
-  block[1] = 0;     /* mode "r" */
-  monitor_stdin = do_AngelSWI (AngelSWI_Reason_Open, (void *) block);
-
-  block[0] = (int) ":tt";
-  block[2] = 3;     /* length of filename */
-  block[1] = 4;     /* mode "w" */
-  monitor_stdout = monitor_stderr = do_AngelSWI (AngelSWI_Reason_Open, (void *) block);
-#else
-  int fh;
-  const char * name;
-
-  name = ":tt";
-  asm ("mov r0,%2; mov r1, #0; swi %a1; mov %0, r0"
-       : "=r"(fh)
-       : "i" (SWI_Open),"r"(name)
-       : "r0","r1");
-  monitor_stdin = fh;
-
-  name = ":tt";
-  asm ("mov r0,%2; mov r1, #4; swi %a1; mov %0, r0"
-       : "=r"(fh)
-       : "i" (SWI_Open),"r"(name)
-       : "r0","r1");
-  monitor_stdout = monitor_stderr = fh;
-#endif
-
-  for (i = 0; i < MAX_OPEN_FILES; i ++)
-    openfiles[i].handle = -1;
-
-  openfiles[0].handle = monitor_stdin;
-  openfiles[0].pos = 0;
-  openfiles[1].handle = monitor_stdout;
-  openfiles[1].pos = 0;
-}
-
-static int
-get_errno (void)
-{
-#ifdef ARM_RDI_MONITOR
-  return do_AngelSWI (AngelSWI_Reason_Errno, NULL);
-#else
-  asm ("swi %a0" :: "i" (SWI_GetErrno));
-#endif
-}
-
-static int
-error (int result)
-{
-  errno = get_errno ();
-  return result;
-}
-
-static int
-wrap (int result)
-{
-  if (result == -1)
-    return error (-1);
-  return result;
-}
-
-/* Returns # chars not! written.  */
-int
-_swiread (int file,
-	  char * ptr,
-	  int len)
-{
-  int fh = remap_handle (file);
-#ifdef ARM_RDI_MONITOR
-  int block[3];
-  
-  block[0] = fh;
-  block[1] = (int) ptr;
-  block[2] = len;
-  
-  return do_AngelSWI (AngelSWI_Reason_Read, block);
-#else
-  asm ("mov r0, %1; mov r1, %2;mov r2, %3; swi %a0"
-       : /* No outputs */
-       : "i"(SWI_Read), "r"(fh), "r"(ptr), "r"(len)
-       : "r0","r1","r2");
-#endif
-}
-
-int
-_read (int file,
-       char * ptr,
-       int len)
-{
-  int slot = findslot (remap_handle (file));
-  int x = _swiread (file, ptr, len);
-
-  if (x < 0)
-    return error (-1);
-
-  if (slot != MAX_OPEN_FILES)
-    openfiles [slot].pos += len - x;
-
-  /* x == len is not an error, at least if we want feof() to work.  */
-  return len - x;
-}
-
-int
-_swilseek (int file,
-	   int ptr,
-	   int dir)
-{
-  int res;
-  int fh = remap_handle (file);
-  int slot = findslot (fh);
-#ifdef ARM_RDI_MONITOR
-  int block[2];
-#endif
-
-  if (dir == SEEK_CUR)
-    {
-      if (slot == MAX_OPEN_FILES)
-	return -1;
-      ptr = openfiles[slot].pos + ptr;
-      dir = SEEK_SET;
-    }
-  
-#ifdef ARM_RDI_MONITOR
-  if (dir == SEEK_END)
-    {
-      block[0] = fh;
-      ptr += do_AngelSWI (AngelSWI_Reason_FLen, block);
-    }
-  
-  /* This code only does absolute seeks.  */
-  block[0] = remap_handle (file);
-  block[1] = ptr;
-  res = do_AngelSWI (AngelSWI_Reason_Seek, block);
-#else
-  if (dir == SEEK_END)
-    {
-      asm ("mov r0, %2; swi %a1; mov %0, r0"
-	   : "=r" (res)
-	   : "i" (SWI_Flen), "r" (fh)
-	   : "r0");
-      ptr += res;
-    }
-
-  /* This code only does absolute seeks.  */
-  asm ("mov r0, %2; mov r1, %3; swi %a1; mov %0, r0"
-       : "=r" (res)
-       : "i" (SWI_Seek), "r" (fh), "r" (ptr)
-       : "r0", "r1");
-#endif
-
-  if (slot != MAX_OPEN_FILES && res == 0)
-    openfiles[slot].pos = ptr;
-
-  /* This is expected to return the position in the file.  */
-  return res == 0 ? ptr : -1;
-}
-
-int
-_lseek (int file,
-	int ptr,
-	int dir)
-{
-  return wrap (_swilseek (file, ptr, dir));
-}
-
-/* Returns #chars not! written.  */
-int
-_swiwrite (
-	   int    file,
-	   char * ptr,
-	   int    len)
-{
-  int fh = remap_handle (file);
-#ifdef ARM_RDI_MONITOR
-  int block[3];
-  
-  block[0] = fh;
-  block[1] = (int) ptr;
-  block[2] = len;
-  
-  return do_AngelSWI (AngelSWI_Reason_Write, block);
-#else
-  asm ("mov r0, %1; mov r1, %2;mov r2, %3; swi %a0"
-       : /* No outputs */
-       : "i"(SWI_Write), "r"(fh), "r"(ptr), "r"(len)
-       : "r0","r1","r2");
-#endif
-}
-
-int
-_write (int    file,
-	char * ptr,
-	int    len)
-{
-  int slot = findslot (remap_handle (file));
-  int x = _swiwrite (file, ptr,len);
-
-  if (x == -1 || x == len)
-    return error (-1);
-  
-  if (slot != MAX_OPEN_FILES)
-    openfiles[slot].pos += len - x;
-  
-  return len - x;
-}
-
-extern int strlen (const char *);
-
-int
-_swiopen (const char * path,
-	  int          flags)
-{
-  int aflags = 0, fh;
-#ifdef ARM_RDI_MONITOR
-  int block[3];
-#endif
-  
-  int i = findslot (-1);
-  
-  if (i == MAX_OPEN_FILES)
-    return -1;
-
-  /* The flags are Unix-style, so we need to convert them.  */
-#ifdef O_BINARY
-  if (flags & O_BINARY)
-    aflags |= 1;
-#endif
-
-  if (flags & O_RDWR)
-    aflags |= 2;
-
-  if (flags & O_CREAT)
-    aflags |= 4;
-
-  if (flags & O_TRUNC)
-    aflags |= 4;
-
-  if (flags & O_APPEND)
-    {
-      aflags &= ~4;     /* Can't ask for w AND a; means just 'a'.  */
-      aflags |= 8;
-    }
-  
-#ifdef ARM_RDI_MONITOR
-  block[0] = (int) path;
-  block[2] = strlen (path);
-  block[1] = aflags;
-  
-  fh = do_AngelSWI (AngelSWI_Reason_Open, block);
-  
-#else
-  asm ("mov r0,%2; mov r1, %3; swi %a1; mov %0, r0"
-       : "=r"(fh)
-       : "i" (SWI_Open),"r"(path),"r"(aflags)
-       : "r0","r1");
-#endif
-  
-  if (fh >= 0)
-    {
-      openfiles[i].handle = fh;
-      openfiles[i].pos = 0;
-    }
-
-  return fh >= 0 ? fh + FILE_HANDLE_OFFSET : error (fh);
-}
-
-int
-_open (const char * path,
-       int          flags,
-       ...)
-{
-  return wrap (_swiopen (path, flags));
-}
-
-int
-_swiclose (int file)
-{
-  int myhan = remap_handle (file);
-  int slot = findslot (myhan);
-  
-  if (slot != MAX_OPEN_FILES)
-    openfiles[slot].handle = -1;
-
-#ifdef ARM_RDI_MONITOR
-  return do_AngelSWI (AngelSWI_Reason_Close, & myhan);
-#else
-  asm ("mov r0, %1; swi %a0" :: "i" (SWI_Close),"r"(myhan):"r0");
-#endif
-}
-
-int
-_close (int file)
-{
-  return wrap (_swiclose (file));
-}
-
-void
-_exit (int n)
-{
-  /* FIXME: return code is thrown away.  */
-  
-#ifdef ARM_RDI_MONITOR
-  do_AngelSWI (AngelSWI_Reason_ReportException,
-	      (void *) ADP_Stopped_ApplicationExit);
-#else
-  asm ("swi %a0" :: "i" (SWI_Exit));
-#endif
-  n = n;
-}
-
-int
-_kill (int n, int m)
-{
-#ifdef ARM_RDI_MONITOR
-  return do_AngelSWI (AngelSWI_Reason_ReportException,
-		      (void *) ADP_Stopped_ApplicationExit);
-#else
-  asm ("swi %a0" :: "i" (SWI_Exit));
-#endif
-  n = n; m = m;
-}
-
-int
-_getpid (int n)
-{
-  return 1;
-  n = n;
-}
-
-caddr_t
-_sbrk (int incr)
-{
-  extern char   end asm ("end");	/* Defined by the linker.  */
-  static char * heap_end;
-  char *        prev_heap_end;
-
-  if (heap_end == NULL)
-    heap_end = & end;
-  
-  prev_heap_end = heap_end;
-  
-  if (heap_end + incr > stack_ptr)
-    {
-      /* Some of the libstdc++-v3 tests rely upon detecting
-	 out of memory errors, so do not abort here.  */
-#if 0
-      extern void abort (void);
-
-      _write (1, "_sbrk: Heap and stack collision\n", 32);
-      
-      abort ();
-#else
-      errno = ENOMEM;
-      return (caddr_t) -1;
-#endif
-    }
-  
-  heap_end += incr;
-
-  return (caddr_t) prev_heap_end;
-}
-
-extern void memset (struct stat *, int, unsigned int);
-
-int
-_fstat (int file, struct stat * st)
-{
-  memset (st, 0, sizeof (* st));
-  st->st_mode = S_IFCHR;
-  st->st_blksize = 1024;
-  return 0;
-  file = file;
-}
-
-int _stat (const char *fname, struct stat *st)
-{
-  int file;
-
-  /* The best we can do is try to open the file readonly.  If it exists,
-     then we can guess a few things about it.  */
-  if ((file = _open (fname, O_RDONLY)) < 0)
-    return -1;
-
-  memset (st, 0, sizeof (* st));
-  st->st_mode = S_IFREG | S_IREAD;
-  st->st_blksize = 1024;
-  _swiclose (file); /* Not interested in the error.  */
-  return 0;
-}
-
-int
-_link (void)
-{
-  return -1;
-}
-
-int
-_unlink (void)
-{
-  return -1;
-}
-
-void
-_raise (void)
-{
-  return;
-}
-
-int
-_gettimeofday (struct timeval * tp, struct timezone * tzp)
-{
-
-  if (tp)
-    {
-    /* Ask the host for the seconds since the Unix epoch.  */
-#ifdef ARM_RDI_MONITOR
-      tp->tv_sec = do_AngelSWI (AngelSWI_Reason_Time,NULL);
-#else
-      {
-        int value;
-        asm ("swi %a1; mov %0, r0" : "=r" (value): "i" (SWI_Time) : "r0");
-        tp->tv_sec = value;
-      }
-#endif
-      tp->tv_usec = 0;
-    }
-
-  /* Return fixed data for the timezone.  */
-  if (tzp)
-    {
-      tzp->tz_minuteswest = 0;
-      tzp->tz_dsttime = 0;
-    }
-
-  return 0;
-}
-
-/* Return a clock that ticks at 100Hz.  */
-clock_t 
-_times (struct tms * tp)
-{
-  clock_t timeval;
-
-#ifdef ARM_RDI_MONITOR
-  timeval = do_AngelSWI (AngelSWI_Reason_Clock,NULL);
-#else
-  asm ("swi %a1; mov %0, r0" : "=r" (timeval): "i" (SWI_Clock) : "r0");
-#endif
-
-  if (tp)
-    {
-      tp->tms_utime  = timeval;	/* user time */
-      tp->tms_stime  = 0;	/* system time */
-      tp->tms_cutime = 0;	/* user time, children */
-      tp->tms_cstime = 0;	/* system time, children */
-    }
-  
-  return timeval;
-};
-
-
-int
-isatty (int fd)
-{
-  return 1;
-  fd = fd;
-}
-
-int
-_system (const char *s)
-{
-  if (s == NULL)
-    return 0;
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-_rename (const char * oldpath, const char * newpath)
-{
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/arm/trap.S b/newlib/libc/sys/arm/trap.S
deleted file mode 100644
index 328fabca5..000000000
--- a/newlib/libc/sys/arm/trap.S
+++ /dev/null
@@ -1,93 +0,0 @@
-        /* Run-time exception support */
-#include "swi.h"
-
-/* .text is used instead of .section .text so it works with arm-aout too.  */
-	.text
-        .align 0
-        .global __rt_stkovf_split_big
-        .global __rt_stkovf_split_small
-
-/* The following functions are provided for software stack checking.
-   If hardware stack-checking is being used then the code can be
-   compiled without the PCS entry checks, and simply rely on VM
-   management to extend the stack for a thread.
-
-   The stack extension event occurs when the PCS function entry code
-   would result in a stack-pointer beneath the stack-limit register
-   value.  The system relies on the following map:
-
-        +-----------------------------------+ <-- end of stack block
-        | ...                               |
-        | ...                               |
-        | active stack                      |
-        | ...                               | <-- sp (stack-pointer) somewhere in here
-        | ...                               |
-        +-----------------------------------+ <-- sl (stack-limit)
-        | stack-extension handler workspace |
-        +-----------------------------------+ <-- base of stack block
-
-   The "stack-extension handler workspace" is an amount of memory in
-   which the stack overflow support code must execute.  It must be
-   large enough to deal with the worst case path through the extension
-   code.  At the moment the compiler expects this to be AT LEAST
-   256bytes.  It uses this fact to code functions with small local
-   data usage within the overflow space.
-
-   In a true target environment We may need to increase the space
-   between sl and the true limit to allow for the stack extension
-   code, SWI handlers and for undefined instruction handlers of the
-   target environment.  */
-
-__rt_stkovf_split_small:
-        mov     ip,sp   @ Ensure we can calculate the stack required
-        @ and fall through to...
-__rt_stkovf_split_big:
-        @ in:   sp = current stack-pointer (beneath stack-limit)
-        @       sl = current stack-limit
-        @       ip = low stack point we require for the current function
-        @       lr = return address into the current function
-        @       fp = frame-pointer
-        @               original sp --> +----------------------------------+
-        @                               | pc (12 ahead of PCS entry store) |
-        @               current fp ---> +----------------------------------+
-        @                               | lr (on entry) pc (on exit)       |
-        @                               +----------------------------------+
-        @                               | sp ("original sp" on entry)      |
-        @                               +----------------------------------+
-        @                               | fp (on entry to function)        |
-        @                               +----------------------------------+
-        @                               |                                  |
-        @                               | ..argument and work registers..  |
-        @                               |                                  |
-        @               current sp ---> +----------------------------------+
-        @
-        @ The "current sl" is somewhere between "original sp" and "current sp"
-        @ but above "true sl". The "current sl" should be at least 256bytes
-        @ above the "true sl". The 256byte stack guard should be large enough
-        @ to deal with the worst case function entry stacking (160bytes) plus
-        @ the stack overflow handler stacking requirements, plus the stack
-        @ required for the memory allocation routines.
-        @
-        @ Normal PCS entry (before stack overflow check) can stack 16
-        @ standard registers (64bytes) and 8 floating point registers
-        @ (96bytes). This gives a minimum stack guard of 160bytes (excluding
-        @ the stack required for the code). (Actually only a maximum of
-        @ 14standard registers are ever stacked on entry to a function).
-        @
-        @ NOTE: Structure returns are performed by the caller allocating a
-        @       dummy space on the stack and passing in a "phantom" arg1 into
-        @       the function. This means that we do not need to worry about
-        @       preserving the stack under "sp" even on function return.
-        @ 
-        @        Code should never poke values beneath sp. The sp register
-        @        should always be "dropped" first to cover the data. This
-        @        protects the data against any events that may try and use
-        @        the stack.
-
-        SUB     ip, sp, ip      @ extra stack required for function
-        @ Add stack extension code here.  If desired a new stack chunk
-        @ can be allocated, and the register state updated suitably.
-
-        @ We now know how much extra stack the function requires.
-        @ Terminate the program for the moment:
-        swi     SWI_Exit
diff --git a/newlib/libc/sys/configure b/newlib/libc/sys/configure
deleted file mode 100755
index ea23ee723..000000000
--- a/newlib/libc/sys/configure
+++ /dev/null
@@ -1,3437 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=a29khif
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../.. $srcdir/../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../.. $srcdir/../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1663: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1693: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1744: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1787 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1818: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1823: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1851: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1894: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1924: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1927: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1962: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1979: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1991: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2029: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2050: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2223: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2253: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2315: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2386: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2418: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2453: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2485: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2552 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2590: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2603 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2640: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2672: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2707: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2739: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2774: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2806: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2842: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2847 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2876: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-if test -n "${sys_dir}"; then
-  subdirs="${sys_dir}"
-
-fi
-
-CRT0=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-fi
-
-
-
-
-if test x${sys_dir} != x; then
-  HAVE_SYS_DIR_TRUE=
-  HAVE_SYS_DIR_FALSE='#'
-else
-  HAVE_SYS_DIR_TRUE='#'
-  HAVE_SYS_DIR_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@CRT0@%$CRT0%g
-s%@HAVE_SYS_DIR_TRUE@%$HAVE_SYS_DIR_TRUE%g
-s%@HAVE_SYS_DIR_FALSE@%$HAVE_SYS_DIR_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${sys_dir}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/sys/configure.in b/newlib/libc/sys/configure.in
deleted file mode 100644
index 4a53612e0..000000000
--- a/newlib/libc/sys/configure.in
+++ /dev/null
@@ -1,32 +0,0 @@
-dnl This is the newlib/libc/sys configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(a29khif)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../..)
-
-NEWLIB_CONFIGURE(../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-if test -n "${sys_dir}"; then
-  AC_CONFIG_SUBDIRS(${sys_dir})
-fi
-
-CRT0=
-if test -n "${sys_dir}"; then
-  CRT0=crt0.o
-fi
-AC_SUBST(CRT0)
-
-AM_CONDITIONAL(HAVE_SYS_DIR, test x${sys_dir} != x)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/d10v/Makefile.am b/newlib/libc/sys/d10v/Makefile.am
deleted file mode 100644
index da89f1198..000000000
--- a/newlib/libc/sys/d10v/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.S creat.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/d10v/Makefile.in b/newlib/libc/sys/d10v/Makefile.in
deleted file mode 100644
index 734438b4e..000000000
--- a/newlib/libc/sys/d10v/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.S creat.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o trap.o creat.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/d10v/aclocal.m4 b/newlib/libc/sys/d10v/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/d10v/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/d10v/configure b/newlib/libc/sys/d10v/configure
deleted file mode 100755
index 4ab303d75..000000000
--- a/newlib/libc/sys/d10v/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=creat.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/d10v/configure.in b/newlib/libc/sys/d10v/configure.in
deleted file mode 100644
index 5559c87c8..000000000
--- a/newlib/libc/sys/d10v/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/d10v configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(creat.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/d10v/creat.c b/newlib/libc/sys/d10v/creat.c
deleted file mode 100644
index 62ec5ead8..000000000
--- a/newlib/libc/sys/d10v/creat.c
+++ /dev/null
@@ -1,7 +0,0 @@
-int
-creat(path, mode)
-     const char *path;
-     int mode;
-{
-  return _creat (path, mode);
-}
diff --git a/newlib/libc/sys/d10v/crt0.S b/newlib/libc/sys/d10v/crt0.S
deleted file mode 100644
index 9a2ed02fb..000000000
--- a/newlib/libc/sys/d10v/crt0.S
+++ /dev/null
@@ -1,63 +0,0 @@
-	.text
-	.global	_start
-	.type	_start,@function
-	.stabs	"crt0.S",100,0,0,_start
-	.stabs	"int:t(0,1)=r(0,1);-32768;32767;",128,0,0,0
-	.stabs	"_start:F(0,1)",36,0,1,_start
-
-_start:
-
-; R14 always contains memory base address (0)
-
-	ldi	r14,0
-
-; Set the USER and SYSTEM stack pointers.
-
-	ldi	r0, 0		; zero arguments
-	ldi	r1, 0
-	mvtc	r0, psw		; select SPI and set it
-	ldi	sp, _stack
-	ldi	r10, 0x8000	; select SPU/FP and set it
-	mvtc r10, psw || ldi r11, 0;  clear stack frame
-	ldi	sp, _stack - 0x200
-	ldi	r13, 0
-
-; Clear the BSS.  Do it in two parts for efficiency: longwords first
-; for most of it, then the remaining 0 to 3 bytes.
-
-	ldi	r2, __bss_start	; R2 = start of BSS
-	ldi	r3, _end	; R3 = end of BSS + 1
-	sub	r3, r2		; R3 = BSS size in bytes
-	mv	r4, r3
-	srli	r4, 2		; R4 = BSS size in longwords (rounded down)
-loop1:
-	cmpeqi	r4, 0		; more longords to zero out?
-	brf0t.s	endloop1	; nope
-	st2w	r0, @r2+	; yep, zero out another longword
-	subi	r4, 1		; decrement count
-	bra.l	loop1		; go do some more
-
-endloop1:
-	and3	r4, r3, 3	; get no. of remaining BSS bytes to clear
-loop2:
-	cmpeqi	r4, 0		; more bytes to zero out?
-	brf0t.s	endloop2	; nope
-	stb	r0, @r2		; yep, zero out another byte
-	addi	r2, 1		; bump address
-	subi	r4, 1		; decrement count
-	bra.s	loop2		; go do some more
-endloop2:
-; Call main, then stop simulator
-	st r11, @-sp
-	st r13, @-sp
-	mv r11, sp
-
-	bl	main
-	bl	exit
-	stop
-.Lstart:
-	.size	_start,.Lstart-_start
-	.stabs	"",36,0,0,.Lstart-_start
-
-	.section .stack
-_stack:	.long	1
diff --git a/newlib/libc/sys/d10v/sys/syscall.h b/newlib/libc/sys/d10v/sys/syscall.h
deleted file mode 100644
index 64e53a3d9..000000000
--- a/newlib/libc/sys/d10v/sys/syscall.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* syscall.h - definitions of system calls for D10V.
- *
- * This file must contain only pre-processor directives, and no C code,
- * because it's included by assembly language sources as well as C.
- */
-
-#define	SYS_exit	1
-#define	SYS_fork	2
-
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
-#define	SYS_stat	38
-
-#define	SYS_pipe	42
-#define	SYS_execve	59
-#define SYS_kill	60
-
-#define SYS_utime       201 /* not really a system call */
-#define SYS_wait        202 /* nor is this */
diff --git a/newlib/libc/sys/d10v/syscalls.c b/newlib/libc/sys/d10v/syscalls.c
deleted file mode 100644
index 11192074a..000000000
--- a/newlib/libc/sys/d10v/syscalls.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/* syscalls.c - non-trap system calls for D10V
- *
- * This file contains system calls that cannot be implemented with
- * a simple "trap 15" instruction.  The ones that can are in trap.S.
- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-#undef	errno
-
-void _exit (int n);	/* in trap.S */
-
-extern int _write (int fd, const void *ptr, size_t len);
-
-int errno;
-
-register char *stack_ptr asm ("sp");
-
-caddr_t
-_sbrk (int incr)
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-  char *sp = (char *)stack_ptr;
-
-  if (heap_end == 0)
-    {
-      heap_end = (char *)((((unsigned short) &end) + 7) & ~7);
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > sp)
-    {
-      _write (2, "Heap and stack collision\n", sizeof ("Heap and stack collision\n")-1);
-      abort ();
-    }
-  heap_end += incr;
-  if ((unsigned short)heap_end > 0xbfff
-      || (heap_end < prev_heap_end && incr > 0)
-      || (heap_end < (char *)((((unsigned short) &end) + 7) & ~7)))
-    {
-      _write (2, "Too much memory was allocated\n", sizeof ("Too much memory was allocated\n")-1);
-      abort ();
-    }
-
-  return (caddr_t) prev_heap_end;
-}
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int
-_unlink ()
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-isatty (int fd)
-{
-  return 1;
-}
-
-void
-_raise ()
-{
-}
-
-/* If this library is compiled with -mint32, provide conversion functions for
-   the system call traps.  */
-
-#if __INT__==32
-extern short _read16 (short fd, void *ptr, short len);
-int
-_read (int fd, void *ptr, size_t len)
-{
-  return _read16 ((short)fd, ptr, (short)len);
-}
-
-extern short _write16 (short fd, const void *ptr, short len);
-int
-_write (int fd, const void *ptr, size_t len)
-{
-  return _write16 ((short)fd, ptr, (short)len);
-}
-
-extern short _lseek16 (short fd, long offset, short whence);
-int
-_lseek (int fd, off_t offset, int whence)
-{
-  return _lseek16 ((short)fd, offset, (short)whence);
-}
-
-extern short _close16 (short fd);
-int
-_close (int fd)
-{
-  return _close16 ((short)fd);
-}
-
-extern short _open16 (const char *name, short flags, short mode);
-int
-_open (const char *name, int flags, mode_t mode)
-{
-  return _open16 (name, (short)flags, (short)mode);
-}
-
-extern short _creat16 (const char *name, mode_t mode);
-int
-_creat (const char *name, mode_t mode)
-{
-  return _creat16 (name, mode);
-}
-
-extern void _exit16 (short status);
-void
-_exit (int status)
-{
-  _exit16 ((short)status);
-}
-
-extern short _stat16 (const char *name, struct stat *stat_pkt);
-int
-_stat (const char *name, struct stat *stat_pkt)
-{
-  return _stat16 (name, stat_pkt);
-}
-
-extern short _chmod16 (const char *name, short mode);
-int
-_chmod (const char *name, mode_t mode)
-{
-  return _chmod16 (name, (short)mode);
-}
-
-extern short _chown16 (const char *name, short uid, short gid);
-int
-_chown (const char *name, uid_t uid, gid_t gid)
-{
-  return _chown16 (name, (short)uid, (short)gid);
-}
-
-extern short _fork16 (void);
-int
-_fork (void)
-{
-  return _fork16 ();
-}
-
-extern short _wait16 (short *status);
-int
-_wait (int *status)
-{
-  if (status)
-    {
-      short status16;
-      short ret = _wait16 (&status16);
-      if (ret >= 0)
-	*status = status16;
-      return ret;
-    }
-  else
-    return _wait16 ((short *)0);
-}
-
-extern short _execve16 (const char *filename, const char *argv [], const char *envp[]);
-int
-_execve (const char *filename, const char *argv [], const char *envp[])
-{
-  return _execve16 (filename, argv, envp);
-}
-
-extern short _execv16 (const char *filename, const char *argv []);
-int
-_execv (const char *filename, const char *argv [])
-{
-  return _execv16 (filename, argv);
-}
-
-extern short _pipe16 (short fds[]);
-int
-_pipe (int fds[])
-{
-  short fds16[2];
-  short ret = _pipe16 (fds16);
-  if (ret >= 0)
-    {
-      fds[0] = fds16[0];
-      fds[1] = fds16[1];
-    }
-
-  return ret;
-}
-
-extern short _getpid16 (void);
-int
-_getpid (void)
-{
-  return _getpid16 ();
-}
-
-extern short _kill16 (short pid, short sig);
-int
-_kill (int pid, int sig)
-{
-  return _kill16 ((short)pid, (short)sig);
-}
-#endif
diff --git a/newlib/libc/sys/d10v/trap.S b/newlib/libc/sys/d10v/trap.S
deleted file mode 100644
index 9aca42913..000000000
--- a/newlib/libc/sys/d10v/trap.S
+++ /dev/null
@@ -1,296 +0,0 @@
-#include "sys/syscall.h"
-
-#define SYSCALL(name) \
-	.global name	; \
-name:			; \
-	ldi	r4, SYS ## name ; \
-	bra	__trap0
-
-	.text
-	.stabs	"trap.S",100,0,0,__trap0
-	.stabs	"int:t(0,1)=r(0,1);-65536;65535;",128,0,0,0
-	.stabs	"long int:t(0,2)=r(0,1);0020000000000;0017777777777;",128,0,0,0
-	.stabs	"_trap0:F(0,1)",36,0,1,__trap0
-	.stabs	"arg1:P(0,1)",64,0,1,0
-	.stabs	"arg2:P(0,1)",64,0,1,1
-	.stabs	"arg3:P(0,1)",64,0,1,2
-	.stabs	"arg4:P(0,1)",64,0,1,3
-	.stabs	"number:P(0,1)",64,0,1,4
-	.global	__trap0
-	.type	__trap0,@function
-__trap0:
-	trap	15			/* trap 15 returns result in r0, error code in r4 */
-	cmpeqi	r4,0			/* is error code zero? */
-	brf0t	ret			/* yes, skip setting errno */
-#if __INT__==32
-	st	r4,@(errno+2,r14)	/* no, set errno */
-	srai	r4,15			/* sign extend high word */
-	st	r4,@(errno,r14)
-#else
-	st	r4,@(errno,r14)	/* no, set errno */
-#endif
-
-ret:
-	jmp	r13		/* return to caller */
-.Ltrap0:
-	.size	__trap0,.Ltrap0-__trap0
-	.stabs	"",36,0,0,.Ltrap0-__trap0
-
-#define CONCAT(a,b) a ## b
-#define STRING(a) #a
-#define XSTRING(a) STRING(a)
-#define XSTRING2(a,b) XSTRING(CONCAT(a,b))
-
-#if __INT__==32
-#define _read _read16
-#define _lseek _lseek16
-#define _write _write16
-#define _close _close16
-#define _open _open16
-#define _creat _creat16
-#define _exit _exit16
-#define _stat _stat16
-#define _chmod _chmod16
-#define _chown _chown16
-#define _fork _fork16
-#define _wait _wait16
-#define _execve _execve16
-#define _execv _execv16
-#define _pipe _pipe16
-#define _kill _kill16
-#define _getpid _getpid16
-#endif
-
-/* Until the assembler allows semicolon as a statement separator, */
-/* we cannot use the SYSCALL macro.  So expand it manually for now. */
-
-/* #SYSCALL(_read) */
-/* #SYSCALL(_lseek) */
-/* #SYSCALL(_write) */
-/* #SYSCALL(_close) */
-/* #SYSCALL(_open) */
-/* #SYSCALL(_creat) */
-/* #SYSCALL(_exit) */
-/* #SYSCALL(_stat) */
-/* #SYSCALL(_chmod) */
-/* #SYSCALL(_chown) */
-/* #SYSCALL(_fork) */
-/* #SYSCALL(_wait) */
-/* #SYSCALL(_execve) */
-/* #SYSCALL(_execv) */
-/* #SYSCALL(_pipe) */
-/* #SYSCALL(_getpid) */
-/* #SYSCALL(_kill) */
-
-	.global	_read
-	.type	_read,@function
-	.stabs	XSTRING2(_read,:F(0,1)),36,0,2,_read
-	.stabs	"fd:P(0,1)",64,0,1,0
-	.stabs	"ptr:P(0,1)",64,0,1,1
-	.stabs	"len:P(0,1)",64,0,1,2
-_read:
-	ldi	r4, SYS_read
-	bra	__trap0
-.Lread:
-	.size	_read,.-_read
-	.stabs	"",36,0,0,.Lread-_read
-
-	.global	_lseek
-	.type	_lseek,@function
-	.stabs	XSTRING2(_lseek,:F(0,1)),36,0,3,_lseek
-	.stabs	"fd:P(0,1)",64,0,1,0
-	.stabs	"offset:P(0,1)",64,0,1,2
-	.stabs	"whence:p(0,1)",160,0,1,0
-_lseek:
-	ldi	r4, SYS_lseek
-	bra	__trap0
-.Llseek:
-	.size	_lseek,.Llseek-_lseek
-	.stabs	"",36,0,0,.Llseek-_lseek
-
-	.global	_write
-	.type	_write,@function
-	.stabs	XSTRING2(_write,:F(0,1)),36,0,4,_write
-	.stabs	"fd:P(0,1)",64,0,1,0
-	.stabs	"ptr:P(0,1)",64,0,1,1
-	.stabs	"len:P(0,1)",64,0,1,2
-_write:
-	ldi	r4, SYS_write
-	bra	__trap0
-.Lwrite:
-	.size	_write,.Lwrite-_write
-	.stabs	"",36,0,0,.Lwrite-_write
-
-	.global	_close
-	.type	_close,@function
-	.stabs	XSTRING2(_close,:F(0,1)),36,0,5,_close
-	.stabs	"fd:P(0,1)",64,0,1,0
-_close:
-	ldi	r4, SYS_close
-	bra	__trap0
-.Lclose:
-	.size	_close,.Lclose-_close
-	.stabs	"",36,0,0,.Lclose-_close
-
-	.global	_open
-	.type	_open,@function
-	.stabs	XSTRING2(_open,:F(0,1)),36,0,6,_open
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"flags:P(0,1)",64,0,1,1
-	.stabs	"mode:P(0,1)",64,0,1,2
-_open:
-	ldi	r4, SYS_open
-	bra	__trap0
-.Lopen:
-	.size	_open,.Lopen-_open
-	.stabs	"",36,0,0,.Lopen-_open
-
-	.global	_creat
-	.type	_creat,@function
-	.stabs	XSTRING2(_creat,:F(0,1)),36,0,7,_creat
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"mode:P(0,1)",64,0,1,1
-_creat:
-	ldi	r4, SYS_creat
-	bra	__trap0
-.Lcreat:
-	.size	_creat,.Lcreat-_creat
-	.stabs	"",36,0,0,.Lcreat-_creat
-
-	.global	_exit
-	.type	_exit,@function
-	.stabs	XSTRING2(_exit,:F(0,1)),36,0,8,_exit
-	.stabs	"status:P(0,1)",64,0,1,0
-_exit:
-	ldi	r4, SYS_exit
-	bra	__trap0
-.Lexit:
-	.size	_exit,.Lexit-_exit
-	.stabs	"",36,0,0,.Lexit-_exit
-
-	.global	_stat
-	.type	_stat,@function
-	.stabs	XSTRING2(_stat,:F(0,1)),36,0,9,_stat
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"packet:P(0,1)",64,0,1,1
-_stat:
-	ldi	r4, SYS_stat
-	bra	__trap0
-.Lstat:
-	.size	_stat,.Lstat-_stat
-	.stabs	"",36,0,0,.Lstat-_stat
-
-	.global	_chmod
-	.type	_chmod,@function
-	.stabs	XSTRING2(_chmod,:F(0,1)),36,0,10,_chmod
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"mode:P(0,1)",64,0,1,1
-_chmod:
-	ldi	r4, SYS_chmod
-	bra	__trap0
-.Lchmod:
-	.size	_chmod,.Lchmod-_chmod
-	.stabs	"",36,0,0,.Lchmod-_chmod
-
-	.global	_chown
-	.type	_chown,@function
-	.stabs	XSTRING2(_chown,:F(0,1)),36,0,11,_chown
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"uid:P(0,1)",64,0,1,1
-	.stabs	"gid:P(0,1)",64,0,1,2
-_chown:
-	ldi	r4, SYS_chown
-	bra	__trap0
-.Lchown:
-	.size	_chown,.Lchown-_chown
-	.stabs	"",36,0,0,.Lchown-_chown
-
-	.global	_fork
-	.type	_fork,@function
-	.stabs	XSTRING2(_fork,:F(0,1)),36,0,12,_fork
-_fork:
-	ldi	r4, SYS_fork
-	bra	__trap0
-.Lfork:
-	.size	_fork,.Lfork-_fork
-	.stabs	"",36,0,0,.Lfork-_fork
-
-	.global	_wait
-	.type	_wait,@function
-	.stabs	"status:P(0,1)",64,0,1,0
-	.stabs	XSTRING2(_wait,:F(0,1)),36,0,13,_wait
-_wait:
-	ldi	r4, SYS_wait
-	bra	__trap0
-.Lwait:
-	.size	_wait,.Lwait-_wait
-	.stabs	"",36,0,0,.Lwait-_wait
-
-	.global	_execve
-	.type	_execve,@function
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"argv:P(0,1)",64,0,1,1
-	.stabs	"envp:P(0,1)",64,0,1,2
-	.stabs	XSTRING2(_execve,:F(0,1)),36,0,14,_execve
-_execve:
-	ldi	r4, SYS_execve
-	bra	__trap0
-.Lexecve:
-	.size	_execve,.Lexecve-_execve
-	.stabs	"",36,0,0,.Lexecve-_execve
-
-	.global	_execv
-	.type	_execv,@function
-	.stabs	XSTRING2(_execv,:F(0,1)),36,0,15,_execv
-	.stabs	"name:P(0,1)",64,0,1,0
-	.stabs	"argv:P(0,1)",64,0,1,1
-_execv:
-	ldi	r4, SYS_execv
-	bra	__trap0
-.Lexecv:
-	.size	_execv,.Lexecv-_execv
-	.stabs	"",36,0,0,.Lexecv-_execv
-
-	.global	_pipe
-	.type	_pipe,@function
-	.stabs	XSTRING2(_pipe,:F(0,1)),36,0,16,_pipe
-	.stabs	"fds:P(0,1)",64,0,1,0
-_pipe:
-	ldi	r4, SYS_pipe
-	bra	__trap0
-.Lpipe:
-	.size	_pipe,.Lpipe-_pipe
-	.stabs	"",36,0,0,.Lpipe-_pipe
-
-	.global	time
-	.type	time,@function
-	.stabs	XSTRING2(time,:F(0,1)),36,0,17,time
-	.stabs	"ptr:P(0,1)",64,0,1,0
-time:
-	ldi	r4, SYS_time
-	bra	__trap0
-.Ltime:
-	.size	time,.Ltime-time
-	.stabs	"",36,0,0,.Ltime-time
-
-	.global	_kill
-	.type	_kill,@function
-	.stabs	XSTRING2(_kill,:F(0,1)),36,0,18,_kill
-	.stabs	"pid:P(0,1)",64,0,1,0
-	.stabs	"sig:P(0,1)",64,0,1,1
-_kill:
-	ldi	r4, SYS_kill
-	bra	__trap0
-.Lkill:
-	.size	_kill,.Lkill-_kill
-	.stabs	"",36,0,0,.Lkill-_kill
-
-	.global	_getpid
-	.type	_getpid,@function
-	.stabs	XSTRING2(_getpid,:F(0,1)),36,0,19,_getpid
-_getpid:
-	ldi	r4, SYS_getpid
-	bra	__trap0
-.Lgetpid:
-	.size	_getpid,.Lgetpid-_getpid
-	.stabs	"",36,0,0,.Lgetpid-_getpid
diff --git a/newlib/libc/sys/decstation/Makefile.am b/newlib/libc/sys/decstation/Makefile.am
deleted file mode 100644
index ad289976f..000000000
--- a/newlib/libc/sys/decstation/Makefile.am
+++ /dev/null
@@ -1,45 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-COPYOFILES = \
-	read.o \
-	open.o \
-	_exit.o \
-	write.o \
-	lseek.o \
-	close.o \
-	sbrk.o \
-	cerror.o \
-	fork.o \
-	isatty.o \
-	ioctl.o \
-	getpid.o \
-	time.o \
-	kill.o \
-	wait.o \
-	execve.o \
-	gettimeofday.o \
-	link.o \
-	unlink.o \
-	fstat.o \
-	times.o  \
-	getrusage.o  
-
-lib_a_SOURCES = _main.c
-lib_a_LIBADD = $(COPYOFILES)
-
-$(COPYOFILES):
-	ar x /lib/libc.a $(COPYOFILES) 
-
-all: crt0.o
-
-crt0.o:
-	cp /lib/crt0.o crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/decstation/Makefile.in b/newlib/libc/sys/decstation/Makefile.in
deleted file mode 100644
index e52bdae47..000000000
--- a/newlib/libc/sys/decstation/Makefile.in
+++ /dev/null
@@ -1,363 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-COPYOFILES = \
-	read.o \
-	open.o \
-	_exit.o \
-	write.o \
-	lseek.o \
-	close.o \
-	sbrk.o \
-	cerror.o \
-	fork.o \
-	isatty.o \
-	ioctl.o \
-	getpid.o \
-	time.o \
-	kill.o \
-	wait.o \
-	execve.o \
-	gettimeofday.o \
-	link.o \
-	unlink.o \
-	fstat.o \
-	times.o  \
-	getrusage.o  
-
-
-lib_a_SOURCES = _main.c
-lib_a_LIBADD = $(COPYOFILES)
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_DEPENDENCIES =  read.o open.o _exit.o write.o lseek.o close.o \
-sbrk.o cerror.o fork.o isatty.o ioctl.o getpid.o time.o kill.o wait.o \
-execve.o gettimeofday.o link.o unlink.o fstat.o times.o getrusage.o
-lib_a_OBJECTS =  _main.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-$(COPYOFILES):
-	ar x /lib/libc.a $(COPYOFILES) 
-
-all: crt0.o
-
-crt0.o:
-	cp /lib/crt0.o crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/decstation/_main.c b/newlib/libc/sys/decstation/_main.c
deleted file mode 100644
index 64878088d..000000000
--- a/newlib/libc/sys/decstation/_main.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-__main()
-{
-  
-
-}
diff --git a/newlib/libc/sys/decstation/aclocal.m4 b/newlib/libc/sys/decstation/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/decstation/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/decstation/configure b/newlib/libc/sys/decstation/configure
deleted file mode 100755
index bc3e12a5d..000000000
--- a/newlib/libc/sys/decstation/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=_main.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/decstation/configure.in b/newlib/libc/sys/decstation/configure.in
deleted file mode 100644
index e2e2738bb..000000000
--- a/newlib/libc/sys/decstation/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/decstation configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(_main.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/decstation/sys/dirent.h b/newlib/libc/sys/decstation/sys/dirent.h
deleted file mode 100644
index c5a90e9fe..000000000
--- a/newlib/libc/sys/decstation/sys/dirent.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _SYS_DIRENT_H
-# define _SYS_DIRENT_H
-
-/*
- * This file was written to be compatible with the BSD directory
- * routines, so it looks like it.  But it was written from scratch.
- * Sean Eric Fagan, sef@Kithrup.COM
- *
- * Modified by dje@cygnus.com for sun.
- * Modified by eichin@cygnus.com for decstation (ultrix 4.2)
- */
-
-typedef struct __dirdesc {
-	int	dd_fd;
-	long	dd_loc;
-	long	dd_size;
-	long	dd_bbase;
-	long	dd_entno;
-	long	dd_bsize;
-	char	*dd_buf;
-} DIR;
-
-# define __dirfd(dp)	((dp)->dd_fd)
-
-DIR *opendir (const char *);
-struct dirent *readdir (DIR *);
-void rewinddir (DIR *);
-int closedir (DIR *);
-
-#include <sys/types.h>
-
-#define MAXNAMLEN	255
-
-#define d_ino	d_fileno	/* compatibility */
-
-struct dirent {
-	unsigned long	d_fileno;
-	unsigned short	d_reclen;
-	unsigned short	d_namlen;
-	char		d_name[MAXNAMLEN + 1];
-};
-
-/* FIXME: include definition of DIRSIZ() ? */
-
-#endif
diff --git a/newlib/libc/sys/h8300hms/Makefile.am b/newlib/libc/sys/h8300hms/Makefile.am
deleted file mode 100644
index b4b8823b7..000000000
--- a/newlib/libc/sys/h8300hms/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c _exit.c sbrk.c misc.c crt1.c \
-	close.S fstat.S lseek.S open.S read.S stat.S write.S
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/h8300hms/Makefile.in b/newlib/libc/sys/h8300hms/Makefile.in
deleted file mode 100644
index 971ada259..000000000
--- a/newlib/libc/sys/h8300hms/Makefile.in
+++ /dev/null
@@ -1,332 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c _exit.c sbrk.c misc.c crt1.c \
-	close.S fstat.S lseek.S open.S read.S stat.S write.S
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o _exit.o sbrk.o misc.o crt1.o close.o fstat.o \
-lseek.o open.o read.o stat.o write.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/h8300hms/_exit.c b/newlib/libc/sys/h8300hms/_exit.c
deleted file mode 100644
index 701cd8e4a..000000000
--- a/newlib/libc/sys/h8300hms/_exit.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* FIXME: which one? */
-
-#include <_ansi.h>
-
-/* `sleep' is passed an argument in r0 that indicates the reason
-   the program is exiting.  The format of r0 is defined in devo/include/wait.h.
-*/
-
-void
-_DEFUN (_exit,(rc),
-     int rc)
-{
-  short rc2;
-
-  rc2 = 0xdead;
-  asm("mov.w %0,r1" : : "r" (rc2) : "r1");
-  rc2 = 0xbeef;
-  asm("mov.w %0,r2" : : "r" (rc2) : "r2");
-  rc2 = rc << 8;
-  asm("mov.w %0,r0\n\tsleep" : : "r" (rc2) : "r0");
-}
-
-void
-_DEFUN (__exit,(rc),
-     int rc)
-{
-  short rc2;
-
-  rc2 = 0xdead;
-  asm("mov.w %0,r1" : : "r" (rc2) : "r1");
-  rc2 = 0xbeef;
-  asm("mov.w %0,r2" : : "r" (rc2) : "r2");
-  rc2 = rc << 8;
-  asm("mov.w %0,r0\n\tsleep" : : "r" (rc2) : "r0");
-}
diff --git a/newlib/libc/sys/h8300hms/aclocal.m4 b/newlib/libc/sys/h8300hms/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/h8300hms/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/h8300hms/close.S b/newlib/libc/sys/h8300hms/close.S
deleted file mode 100644
index 4df86cb55..000000000
--- a/newlib/libc/sys/h8300hms/close.S
+++ /dev/null
@@ -1,17 +0,0 @@
-;int close(int fd);
-;Integer arguments have to be zero extended.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __close
-__close:
-#if defined(__H8300H__) || defined(__H8300S__)
-#if __INT_MAX__ == 32767
-	extu.l er0
-#endif
-#endif
-	jsr @@0xc9
-	rts
-	.end
diff --git a/newlib/libc/sys/h8300hms/configure b/newlib/libc/sys/h8300hms/configure
deleted file mode 100755
index 7944b3353..000000000
--- a/newlib/libc/sys/h8300hms/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt1.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/h8300hms/configure.in b/newlib/libc/sys/h8300hms/configure.in
deleted file mode 100644
index 7f5b630f6..000000000
--- a/newlib/libc/sys/h8300hms/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/h8300hms configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt1.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/h8300hms/crt0.S b/newlib/libc/sys/h8300hms/crt0.S
deleted file mode 100644
index 8ad6ddc59..000000000
--- a/newlib/libc/sys/h8300hms/crt0.S
+++ /dev/null
@@ -1,105 +0,0 @@
-; h8/300 and h8/300h start up file.
-
-#include "setarch.h"
-
-#ifdef __H8300__
-
-	.section .text
-	.global	_start
-_start:
-	mov.w	#_stack,sp
-	mov.w	#_edata,r0
-	mov.w	#_end,r1
-	sub.w   r2,r2
-.Loop:	mov.w	r2,@r0
-	adds	#2,r0
-	cmp	r1,r0
-	blo	.Loop
-#ifdef __ELF__
-	mov.l   #__fini,r0
-	jsr     @_atexit
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr     @__init
-#else
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr	@___main
-#endif
-	jsr	@_main
-	jsr	@_exit
-
-	.section .stack
-_stack:	.word 	1
-
-#endif
-
-#ifdef __H8300H__
-
-	.section .text
-	.global	_start
-_start:
-	mov.l	#_stack,sp
-	mov.l	#_edata,er0
-	mov.l	#_end,er1
-	sub.w   r2,r2           ; not sure about alignment requirements
-.Loop:	mov.w	r2,@er0		; playing it safe for now
-	adds	#2,er0
-	cmp.l	er1,er0
-	blo	.Loop
-#ifdef __ELF__
-	mov.l   #__fini,er0
-	jsr     @_atexit
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr     @__init
-#else
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr	@___main
-#endif
-	jsr	@_main
-	jsr	@_exit
-
-	.section .stack
-_stack:	.long 	1
-
-#endif
-
-#ifdef __H8300S__
-
-	.section .text
-	.global	_start
-_start:
-	mov.l	#_stack,sp
-	mov.l	#_edata,er0
-	mov.l	#_end,er1
-	sub.w   r2,r2           ; not sure about alignment requirements
-.Loop:	mov.w	r2,@er0		; playing it safe for now
-	adds	#2,er0
-	cmp.l	er1,er0
-	blo	.Loop
-#ifdef __ELF__
-	mov.l   #__fini,er0
-	jsr     @_atexit
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr     @__init
-#else
-#ifdef __SIMULATOR__
-        jsr     @0xcc
-#endif
-	jsr	@___main
-#endif
-	jsr	@_main
-	jsr	@_exit
-
-	.section .stack
-_stack:	.long 	1
-
-#endif
diff --git a/newlib/libc/sys/h8300hms/crt1.c b/newlib/libc/sys/h8300hms/crt1.c
deleted file mode 100644
index bd4ccf2d8..000000000
--- a/newlib/libc/sys/h8300hms/crt1.c
+++ /dev/null
@@ -1,18 +0,0 @@
-void __main ()
-{
-#ifndef __ELF__
-  static int initialized;
-  if (! initialized)
-    {
-      typedef void (*pfunc) ();
-      extern pfunc __ctors[];
-      extern pfunc __ctors_end[];
-      pfunc *p;
-
-      initialized = 1;
-      for (p = __ctors_end; p > __ctors; )
-	(*--p) ();
-
-    }
-#endif
-}
diff --git a/newlib/libc/sys/h8300hms/fstat.S b/newlib/libc/sys/h8300hms/fstat.S
deleted file mode 100644
index b89df0cbe..000000000
--- a/newlib/libc/sys/h8300hms/fstat.S
+++ /dev/null
@@ -1,18 +0,0 @@
-;int fstat(int filedes, struct stat *buf);
-;Integer arguments have to be zero extended.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __fstat
-__fstat:
-#if defined(__H8300H__) || defined(__H8300S__)
-#if __INT_MAX__ == 32767
-	extu.l	er0
-#endif
-#endif
-	jsr @@0xcb
-	rts
-	.end
-									
diff --git a/newlib/libc/sys/h8300hms/lseek.S b/newlib/libc/sys/h8300hms/lseek.S
deleted file mode 100644
index b82f8412e..000000000
--- a/newlib/libc/sys/h8300hms/lseek.S
+++ /dev/null
@@ -1,18 +0,0 @@
-;off_t lseek(int fildes, off_t offset, int whence);
-;Integer arguments have to be zero extended.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __lseek
-__lseek:
-#if defined(__H8300H__) || defined(__H8300S__)
-#if __INT_MAX__ == 32767
-	extu.l er0
-	extu.l er2
-#endif
-#endif
-	jsr @@0xc8
-	rts
-	.end
diff --git a/newlib/libc/sys/h8300hms/misc.c b/newlib/libc/sys/h8300hms/misc.c
deleted file mode 100644
index 6021b5cb6..000000000
--- a/newlib/libc/sys/h8300hms/misc.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Misc. operating system stubs.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-/* _raise(), getpid(), and kill() are required by abort().
-   getpid/kill are prefixed with '_' because of MISSING_SYSCALL_NAMES.  */
-
-int _DEFUN(_raise,(sig),
-	   int sig)
-{
-  return 0;
-}
-
-int _DEFUN(_getpid,(),)
-{
-  return 0;
-}
-
-int _DEFUN(_kill,(pid, sig),
-	   int pid _AND
-	   int sig)
-{
-  if (pid == 0)
-    {
-      /* Narrow SIG down to a short, in case we're compiled with -mint32.  */
-      short sig2 = sig;
-      /* This causes the simulator to indicate abort() was called.
-	 The format of r0 is defined by devo/include/wait.h.  */
-      asm ("mov.w %0,r0\n\tsleep" : : "r" (sig2) : "r0");
-    }
-  return 0;
-}
diff --git a/newlib/libc/sys/h8300hms/open.S b/newlib/libc/sys/h8300hms/open.S
deleted file mode 100644
index 0feaab217..000000000
--- a/newlib/libc/sys/h8300hms/open.S
+++ /dev/null
@@ -1,14 +0,0 @@
-;int open(const char *pathname, int flags);
-;Integer arguments have to be zero extended.
-;The second argument is taken from the stack,
-;hence it is not zero extended here.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __open
-__open:
-	jsr @@0xc5
-	rts
-	.end
diff --git a/newlib/libc/sys/h8300hms/read.S b/newlib/libc/sys/h8300hms/read.S
deleted file mode 100644
index 1a2731e85..000000000
--- a/newlib/libc/sys/h8300hms/read.S
+++ /dev/null
@@ -1,18 +0,0 @@
-;ssize_t read(int fd, void *buf, size_t count);
-;Integer arguments have to be zero extended.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __read
-__read:
-#if defined(__H8300H__) || defined(__H8300S__)
-#if __INT_MAX__ == 32767
-	extu.l  er0
-#endif
-#endif
-	jsr @@0xc6
-	rts
-	.end
-									
diff --git a/newlib/libc/sys/h8300hms/sbrk.c b/newlib/libc/sys/h8300hms/sbrk.c
deleted file mode 100644
index 1456a67eb..000000000
--- a/newlib/libc/sys/h8300hms/sbrk.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-register char *stack_ptr asm ("sp");
-
-caddr_t 
-  _sbrk(incr)
-     int incr;
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-
-  if (heap_end == 0) 
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return (caddr_t)prev_heap_end;
-}
-
diff --git a/newlib/libc/sys/h8300hms/setarch.h b/newlib/libc/sys/h8300hms/setarch.h
deleted file mode 100644
index b670e1773..000000000
--- a/newlib/libc/sys/h8300hms/setarch.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifdef __H8300H__
-#ifdef __NORMAL_MODE__
-	.h8300hn
-#else
-	.h8300h
-#endif
-#endif
-#ifdef __H8300S__
-#ifdef __NORMAL_MODE__
-	.h8300sn
-#else
-	.h8300s
-#endif
-#endif
diff --git a/newlib/libc/sys/h8300hms/stat.S b/newlib/libc/sys/h8300hms/stat.S
deleted file mode 100644
index dae23c470..000000000
--- a/newlib/libc/sys/h8300hms/stat.S
+++ /dev/null
@@ -1,12 +0,0 @@
-;int stat(const char *file_name, struct stat *buf);
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __stat
-__stat:
-	jsr @@0xca
-	rts
-	.end
-									
diff --git a/newlib/libc/sys/h8300hms/sys/file.h b/newlib/libc/sys/h8300hms/sys/file.h
deleted file mode 100644
index dd87705fa..000000000
--- a/newlib/libc/sys/h8300hms/sys/file.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* This is file FILE.H */
-/*
- * Copyright (C) 1991 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _FILE_H_
-#define _FILE_H_
-
-#include <fcntl.h>
-
-#define L_SET  0
-#define L_CURR 1
-#define L_XTND 2
-
-
-#define	F_OK		0	/* does file exist */
-#define	X_OK		1	/* is it executable by caller */
-#define	W_OK		2	/* is it writable by caller */
-#define	R_OK		4	/* is it readable by caller */
-
-#endif
diff --git a/newlib/libc/sys/h8300hms/sys/syscall.h b/newlib/libc/sys/h8300hms/sys/syscall.h
deleted file mode 100644
index fba03549c..000000000
--- a/newlib/libc/sys/h8300hms/sys/syscall.h
+++ /dev/null
@@ -1 +0,0 @@
-#define	SYS_read	4
diff --git a/newlib/libc/sys/h8300hms/syscalls.c b/newlib/libc/sys/h8300hms/syscalls.c
deleted file mode 100644
index b716e62fc..000000000
--- a/newlib/libc/sys/h8300hms/syscalls.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Operating system stubs, set up for the MRI simulator */
-
-#include <_ansi.h>
-#include <errno.h>
-
-int isatty(file)
-     int file;
-{
-  return 1;
-}
-
-int
-_unlink (path)
-     const char *path;
-{
-  errno = EIO;
-  return -1;
-}
diff --git a/newlib/libc/sys/h8300hms/write.S b/newlib/libc/sys/h8300hms/write.S
deleted file mode 100644
index fde5dc314..000000000
--- a/newlib/libc/sys/h8300hms/write.S
+++ /dev/null
@@ -1,17 +0,0 @@
-;ssize_t write(int fd, const void *buf, size_t count);
-;Integer arguments have to be zero extended.
-
-#include "setarch.h"
-
-	.section .text
-	.align 2
-	.global __write
-__write:
-#if defined(__H8300H__) || defined(__H8300S__)
-#if __INT_MAX__ == 32767
-	extu.l	er0
-#endif
-#endif
-	jsr @@0xc7
-	rts
-	.end
diff --git a/newlib/libc/sys/h8500hms/Makefile.am b/newlib/libc/sys/h8500hms/Makefile.am
deleted file mode 100644
index 8febfd388..000000000
--- a/newlib/libc/sys/h8500hms/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c misc.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/h8500hms/Makefile.in b/newlib/libc/sys/h8500hms/Makefile.in
deleted file mode 100644
index 345946a17..000000000
--- a/newlib/libc/sys/h8500hms/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c misc.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o misc.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/h8500hms/aclocal.m4 b/newlib/libc/sys/h8500hms/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/h8500hms/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/h8500hms/configure b/newlib/libc/sys/h8500hms/configure
deleted file mode 100755
index 586e0f8df..000000000
--- a/newlib/libc/sys/h8500hms/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=misc.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/h8500hms/configure.in b/newlib/libc/sys/h8500hms/configure.in
deleted file mode 100644
index b050f4ed1..000000000
--- a/newlib/libc/sys/h8500hms/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/h8500hms configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(misc.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/h8500hms/crt0.c b/newlib/libc/sys/h8500hms/crt0.c
deleted file mode 100644
index fa7d1b93c..000000000
--- a/newlib/libc/sys/h8500hms/crt0.c
+++ /dev/null
@@ -1,32 +0,0 @@
-
-extern char _start_bss;
-extern char end;
-extern char stack;
-
-static zeroandrun();
-#pragma noprolog
-
-start()
-{
-  asm("mov.w #%off(_stack),sp");
-/*  asm("ldc.w  #0x700,sr");*/
-  asm("ldc.b  #%page(_stack),tp");
-  asm("ldc.b  #%page(_stack),dp");
-  asm("ldc.b  #%page(_stack),ep");
-  /* Can't have anything else in here, since the fp won't be set up
-     so local variables won't work */
-  zeroandrun();
-}
-
-static
-zeroandrun()
-{
-  char *p;
-  p = &_start_bss;
-  while (p < &end) 
-    {
-      *p++ = 0;
-    }
-  main();
-  _exit();
-}
diff --git a/newlib/libc/sys/h8500hms/misc.c b/newlib/libc/sys/h8500hms/misc.c
deleted file mode 100644
index a791704a1..000000000
--- a/newlib/libc/sys/h8500hms/misc.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* Misc. operating system stubs.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-
-/* _raise(), getpid(), and kill() are required by abort().
-   getpid/kill are prefixed with '_' because of MISSING_SYSCALL_NAMES.  */
-
-int _DEFUN(_raise,(sig),
-	   int sig)
-{
-  return 0;
-}
-
-int _DEFUN(_getpid,(),)
-{
-  return 0;
-}
-
-int _DEFUN(_kill,(pid, sig),
-	   int pid _AND
-	   int sig)
-{
-  if (sig == SIGABRT)
-    asm ("mov.w #34,r3; trapa #15");
-  return 0;
-}
diff --git a/newlib/libc/sys/h8500hms/syscalls.c b/newlib/libc/sys/h8500hms/syscalls.c
deleted file mode 100644
index bb0c3c0c7..000000000
--- a/newlib/libc/sys/h8500hms/syscalls.c
+++ /dev/null
@@ -1,129 +0,0 @@
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-int 
-_read (file, ptr, len)
-     int file;
-     char *ptr;
-     size_t len;
-
-{
-  return 0;
-}
-
-
-int 
-_lseek (file, ptr, dir)
-     int file;
-     int ptr;
-     int dir;
-
-{
-  return 0;
-
-}
-
-static 
-writechar (c)
-     char c;
-
-
-{
-  register int n asm ("r3");
-  n = c;
-asm ("clr.w	r1;mov.w %0,r0; mov.w #6,r3; trapa #15": :"g" (n) : "r3","r1","r0");
-}
-
-
-
-int 
-_write (file, ptr, len)
-     int file;
-     char *ptr;
-     size_t len;
-{
-
-  int todo;
-
-  for (todo = 0; todo < len; todo++)
-    {
-      writechar (*ptr++);
-    }
-  return len;
-
-}
-
-
-
-int 
-_close (file)
-     int file;
-{
-
-  return -1;
-}
-
-
-
-caddr_t
-_sbrk (incr)
-     size_t incr;
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-
-  if (heap_end == 0)
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
-
-
-
-int 
-isatty (file)
-     int file;
-{
-  return 1;
-}
-
-
-
-int 
-_fstat (file, stat)
-     int file;
-     struct stat *stat;
-
-{
-  stat->st_mode = S_IFCHR;
-  return 0;
-}
-
-int 
-_open (path, flags)
-     const char *path;
-     int flags;
-
-{
-  return 0;
-}
-
-
-void 
-_exit (status)
-     int status;
-{
-  asm (" mov.w #33,r3; trapa #15");
-}
diff --git a/newlib/libc/sys/linux/Makefile.am b/newlib/libc/sys/linux/Makefile.am
deleted file mode 100644
index 1579368c3..000000000
--- a/newlib/libc/sys/linux/Makefile.am
+++ /dev/null
@@ -1,242 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) $(INCLTDL)
-
-if ELIX_LEVEL_1
-argp_dir=
-ARGP_LIB=
-else
-argp_dir=argp
-ARGP_LIB=argp/libargp.la
-endif
-
-SUBDIRS = machine \
-	$(argp_dir) \
-	cmath \
-	$(EXTRA_SUBDIRS)\
-	.
-SUBLIBS = \
-	$(ARGP_LIB) \
-	cmath/libcmath.la \
-	$(EXTRA_SUBLIBS) \
-	$(LINUX_MACH_LIB)
-
-GENERAL_SOURCES = \
-	aio.c \
-	brk.c \
-	calloc.c \
-	callocr.c \
-	cfreer.c \
-	cfspeed.c \
-	clock_getres.c \
-	clock_gettime.c \
-	clock_settime.c \
-	flockfile.c \
-	free.c \
-	freer.c \
-	ftok.c \
-	funlockfile.c \
-	getdate.c \
-	getdate_err.c \
-	gethostname.c \
-	getreent.c \
-	ids.c \
-	inode.c \
-	io.c \
-	ipc.c \
-	linux.c \
-	mallinfor.c \
-	mallocr.c \
-	mallstatsr.c \
-	mmap.c \
-	mq_close.c \
-	mq_getattr.c \
-	mq_notify.c \
-	mq_open.c \
-	mq_receive.c \
-	mq_send.c \
-	mq_setattr.c \
-	mq_unlink.c \
-	msize.c \
-	msizer.c \
-	mstats.c \
-	mtrim.c \
-	mtrimr.c \
-	ntp_gettime.c \
-	pread.c \
-	process.c \
-	prof-freq.c \
-	profile.c \
-	psignal.c \
-	pwrite.c \
-	raise.c \
-	realloc.c \
-	reallocr.c \
-	rename.c \
-	resource.c \
-	sched.c \
-	select.c \
-	seteuid.c \
-	sethostname.c \
-	shm_open.c \
-	shm_unlink.c \
-	sig.c \
-	sigaction.c \
-	sigqueue.c \
-	signal.c \
-	siglongjmp.c \
-	sigset.c \
-	sigwait.c \
-	socket.c \
-	sleep.c \
-	strsignal.c \
-	strverscmp.c \
-	sysconf.c \
-	sysctl.c \
-	systat.c \
-	tcdrain.c \
-	tcsendbrk.c \
-	termios.c \
-	time.c \
-	usleep.c \
-	versionsort.c 
-
-ELIX_2_OBJS = \
-	aio64.$(oext) \
-	confstr.$(oext) \
-	ctermid.$(oext) \
-	fclean.$(oext) \
-	fpathconf.$(oext) \
-	fstab.$(oext) \
-	fstatvfs.$(oext) \
-	fstatvfs64.$(oext) \
-	ftw.$(oext) \
-	ftw64.$(oext) \
-	getopt.$(oext) \
-	getopt1.$(oext) \
-	getrlimit64.$(oext) \
-	getwd.$(oext) \
-	io64.$(oext) \
-	malign.$(oext) \
-	malignr.$(oext) \
-	malloptr.$(oext) \
-	mcheck.$(oext) \
-	mntent.$(oext) \
-	mntent_r.$(oext) \
-	pathconf.$(oext) \
-	pread64.$(oext) \
-	pvallocr.$(oext) \
-	pwrite64.$(oext) \
-	readdir64.$(oext) \
-	realpath.$(oext) \
-	scandir64.$(oext) \
-	setrlimit64.$(oext) \
-	statvfs.$(oext) \
-	statvfs64.$(oext) \
-	ttyname_r.$(oext) \
-	utimes.$(oext) \
-	vallocr.$(oext) \
-	versionsort64.$(oext)
-
-ELIX_3_OBJS = \
-	system.$(oext) \
-	wait.$(oext)
-
-ELIX_4_OBJS = \
-	getlogin.$(oext) \
-	getpwnam.$(oext) \
-	getpwuid.$(oext) \
-	stack.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS = $(ELIX_2_OBJS)
-else
-if ELIX_LEVEL_3
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS)
-else
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-endif
-endif
-endif
-
-# This will handle both /usr/src/linux-2.4/include/asm/signal.h (in Red Hat Linux 7.1)
-# and also /usr/src/linux/include/asm/signal.h in older versions of Red Hat Linux
-SIGNAL_H = /usr/src/$(shell ls /usr/src/ | grep ^linux | head -n 1)/include/asm/signal.h
-
-liblinux_la_LDFLAGS = -Xcompiler -nostdlib
-
-ADD_OBJS = \
-	malloc.$(oext) \
-	gethostid.$(oext) \
-	sethostid.$(oext) \
-	$(LINUX_MACH_LIB)
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = liblinux.la
-liblinux_la_SOURCES = $(GENERAL_SOURCES)
-liblinux_la_LIBADD = $(ADD_OBJS) $(LIB_OBJS)
-liblinux_la_DEPENDENCIES = $(ADD_OBJS) $(LIB_OBJS)
-LIBC_COMPILE = $(LTCOMPILE)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(ADD_OBJS) $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(ADD_OBJS) $(LIB_OBJS)
-LIBC_COMPILE = $(COMPILE)
-noinst_DATA =
-
-lib.a:  $(ADD_OBJS) $(LIB_OBJS) $(lib_a_OBJECTS)
-	rm -f $@
-	rm -rf tmp
-	mkdir tmp
-	cd tmp; \
-	for i in $(SUBLIBS); do \
-	  $(AR) x ../$$i; \
-	done; \
-	$(AR) $(AR_FLAGS) ../$@ *.o
-	$(RANLIB) $@
-	rm -rf tmp
-
-endif # USE_LIBTOOL
-
-objectlist.awk.in: $(noinst_LTLIBRARIES) $(SUBLIBS)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	  do \
-	    echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-	for j in $(SUBLIBS) ; \
-	  do \
-	    export i=`echo $$j | sed -e 's,\(.*\)\/[^\/]*$$,\1,'`; \
-	    if test $$i != "." && test -f $$i/objectlist.awk.in; then \
-	    	cat $$i/objectlist.awk.in >> objectlist.awk.in ; \
-	    fi; \
-	done
-
-all: crt0.o crt1.o
-
-crt0.o: machine/crt0.o
-	rm -f $@
-	ln machine/crt0.o $@ >/dev/null 2>/dev/null || cp machine/crt0.o $@
-
-machine/crt0.o: ; @true
-
-sig.$(oext):	siglist.inc
-
-siglist.inc:
-		$(AWK) '/#define.SIG.*[1-9][0-9]*/ { n[$$3] = $$2 } \
-		  /#define.NSIG.*[1-9][0-9]*/ { max = $$3 } \
-		  /#define.SIGUNUSED/ \
-		    { for (i = 0; i <= max; i++) print "\"" n[i] "\"," }' \
-		    < $(SIGNAL_H) > siglist.inc || \
-		    { rm -f siglist.inc; exit 1; }
-
-AM_CFLAGS = -I $(srcdir)/../../stdio
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/linux/Makefile.in b/newlib/libc/sys/linux/Makefile.in
deleted file mode 100644
index 809ecbcc4..000000000
--- a/newlib/libc/sys/linux/Makefile.in
+++ /dev/null
@@ -1,733 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-EXTRA_SUBDIRS = @EXTRA_SUBDIRS@
-EXTRA_SUBLIBS = @EXTRA_SUBLIBS@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) $(INCLTDL)
-@ELIX_LEVEL_1_TRUE@argp_dir = 
-@ELIX_LEVEL_1_FALSE@argp_dir = @ELIX_LEVEL_1_FALSE@argp
-@ELIX_LEVEL_1_TRUE@ARGP_LIB = 
-@ELIX_LEVEL_1_FALSE@ARGP_LIB = @ELIX_LEVEL_1_FALSE@argp/libargp.la
-
-SUBDIRS = machine \
-	$(argp_dir) \
-	cmath \
-	$(EXTRA_SUBDIRS)\
-	.
-
-SUBLIBS = \
-	$(ARGP_LIB) \
-	cmath/libcmath.la \
-	$(EXTRA_SUBLIBS) \
-	$(LINUX_MACH_LIB)
-
-
-GENERAL_SOURCES = \
-	aio.c \
-	brk.c \
-	calloc.c \
-	callocr.c \
-	cfreer.c \
-	cfspeed.c \
-	clock_getres.c \
-	clock_gettime.c \
-	clock_settime.c \
-	flockfile.c \
-	free.c \
-	freer.c \
-	ftok.c \
-	funlockfile.c \
-	getdate.c \
-	getdate_err.c \
-	gethostname.c \
-	getreent.c \
-	ids.c \
-	inode.c \
-	io.c \
-	ipc.c \
-	linux.c \
-	mallinfor.c \
-	mallocr.c \
-	mallstatsr.c \
-	mmap.c \
-	mq_close.c \
-	mq_getattr.c \
-	mq_notify.c \
-	mq_open.c \
-	mq_receive.c \
-	mq_send.c \
-	mq_setattr.c \
-	mq_unlink.c \
-	msize.c \
-	msizer.c \
-	mstats.c \
-	mtrim.c \
-	mtrimr.c \
-	ntp_gettime.c \
-	pread.c \
-	process.c \
-	prof-freq.c \
-	profile.c \
-	psignal.c \
-	pwrite.c \
-	raise.c \
-	realloc.c \
-	reallocr.c \
-	rename.c \
-	resource.c \
-	sched.c \
-	select.c \
-	seteuid.c \
-	sethostname.c \
-	shm_open.c \
-	shm_unlink.c \
-	sig.c \
-	sigaction.c \
-	sigqueue.c \
-	signal.c \
-	siglongjmp.c \
-	sigset.c \
-	sigwait.c \
-	socket.c \
-	sleep.c \
-	strsignal.c \
-	strverscmp.c \
-	sysconf.c \
-	sysctl.c \
-	systat.c \
-	tcdrain.c \
-	tcsendbrk.c \
-	termios.c \
-	time.c \
-	usleep.c \
-	versionsort.c 
-
-
-ELIX_2_OBJS = \
-	aio64.$(oext) \
-	confstr.$(oext) \
-	ctermid.$(oext) \
-	fclean.$(oext) \
-	fpathconf.$(oext) \
-	fstab.$(oext) \
-	fstatvfs.$(oext) \
-	fstatvfs64.$(oext) \
-	ftw.$(oext) \
-	ftw64.$(oext) \
-	getopt.$(oext) \
-	getopt1.$(oext) \
-	getrlimit64.$(oext) \
-	getwd.$(oext) \
-	io64.$(oext) \
-	malign.$(oext) \
-	malignr.$(oext) \
-	malloptr.$(oext) \
-	mcheck.$(oext) \
-	mntent.$(oext) \
-	mntent_r.$(oext) \
-	pathconf.$(oext) \
-	pread64.$(oext) \
-	pvallocr.$(oext) \
-	pwrite64.$(oext) \
-	readdir64.$(oext) \
-	realpath.$(oext) \
-	scandir64.$(oext) \
-	setrlimit64.$(oext) \
-	statvfs.$(oext) \
-	statvfs64.$(oext) \
-	ttyname_r.$(oext) \
-	utimes.$(oext) \
-	vallocr.$(oext) \
-	versionsort64.$(oext)
-
-
-ELIX_3_OBJS = \
-	system.$(oext) \
-	wait.$(oext)
-
-
-ELIX_4_OBJS = \
-	getlogin.$(oext) \
-	getpwnam.$(oext) \
-	getpwuid.$(oext) \
-	stack.$(oext)
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@$(ELIX_2_OBJS) $(ELIX_3_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@$(ELIX_2_OBJS) $(ELIX_3_OBJS) $(ELIX_4_OBJS)
-
-# This will handle both /usr/src/linux-2.4/include/asm/signal.h (in Red Hat Linux 7.1)
-# and also /usr/src/linux/include/asm/signal.h in older versions of Red Hat Linux
-SIGNAL_H = /usr/src/$(shell ls /usr/src/ | grep ^linux | head -n 1)/include/asm/signal.h
-
-liblinux_la_LDFLAGS = -Xcompiler -nostdlib
-
-ADD_OBJS = \
-	malloc.$(oext) \
-	gethostid.$(oext) \
-	sethostid.$(oext) \
-	$(LINUX_MACH_LIB)
-
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@liblinux.la
-@USE_LIBTOOL_TRUE@liblinux_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@liblinux_la_LIBADD = @USE_LIBTOOL_TRUE@$(ADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_TRUE@liblinux_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(ADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_TRUE@LIBC_COMPILE = @USE_LIBTOOL_TRUE@$(LTCOMPILE)
-@USE_LIBTOOL_FALSE@LIBC_COMPILE = @USE_LIBTOOL_FALSE@$(COMPILE)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(ADD_OBJS) $(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(ADD_OBJS) $(LIB_OBJS)
-
-AM_CFLAGS = -I $(srcdir)/../../stdio
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  aio.$(OBJEXT) brk.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@calloc.$(OBJEXT) callocr.$(OBJEXT) cfreer.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@cfspeed.$(OBJEXT) clock_getres.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@clock_gettime.$(OBJEXT) clock_settime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@flockfile.$(OBJEXT) free.$(OBJEXT) freer.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ftok.$(OBJEXT) funlockfile.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getdate.$(OBJEXT) getdate_err.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gethostname.$(OBJEXT) getreent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ids.$(OBJEXT) inode.$(OBJEXT) io.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ipc.$(OBJEXT) linux.$(OBJEXT) mallinfor.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mallocr.$(OBJEXT) mallstatsr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mmap.$(OBJEXT) mq_close.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mq_getattr.$(OBJEXT) mq_notify.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mq_open.$(OBJEXT) mq_receive.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mq_send.$(OBJEXT) mq_setattr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mq_unlink.$(OBJEXT) msize.$(OBJEXT) msizer.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mstats.$(OBJEXT) mtrim.$(OBJEXT) mtrimr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ntp_gettime.$(OBJEXT) pread.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@process.$(OBJEXT) prof-freq.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@profile.$(OBJEXT) psignal.$(OBJEXT) pwrite.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@raise.$(OBJEXT) realloc.$(OBJEXT) reallocr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@rename.$(OBJEXT) resource.$(OBJEXT) sched.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@select.$(OBJEXT) seteuid.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sethostname.$(OBJEXT) shm_open.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@shm_unlink.$(OBJEXT) sig.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sigaction.$(OBJEXT) sigqueue.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@signal.$(OBJEXT) siglongjmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sigset.$(OBJEXT) sigwait.$(OBJEXT) socket.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sleep.$(OBJEXT) strsignal.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strverscmp.$(OBJEXT) sysconf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysctl.$(OBJEXT) systat.$(OBJEXT) tcdrain.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@tcsendbrk.$(OBJEXT) termios.$(OBJEXT) time.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@usleep.$(OBJEXT) versionsort.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@liblinux_la_OBJECTS =  aio.lo brk.lo calloc.lo \
-@USE_LIBTOOL_TRUE@callocr.lo cfreer.lo cfspeed.lo clock_getres.lo \
-@USE_LIBTOOL_TRUE@clock_gettime.lo clock_settime.lo flockfile.lo \
-@USE_LIBTOOL_TRUE@free.lo freer.lo ftok.lo funlockfile.lo getdate.lo \
-@USE_LIBTOOL_TRUE@getdate_err.lo gethostname.lo getreent.lo ids.lo \
-@USE_LIBTOOL_TRUE@inode.lo io.lo ipc.lo linux.lo mallinfor.lo \
-@USE_LIBTOOL_TRUE@mallocr.lo mallstatsr.lo mmap.lo mq_close.lo \
-@USE_LIBTOOL_TRUE@mq_getattr.lo mq_notify.lo mq_open.lo mq_receive.lo \
-@USE_LIBTOOL_TRUE@mq_send.lo mq_setattr.lo mq_unlink.lo msize.lo \
-@USE_LIBTOOL_TRUE@msizer.lo mstats.lo mtrim.lo mtrimr.lo ntp_gettime.lo \
-@USE_LIBTOOL_TRUE@pread.lo process.lo prof-freq.lo profile.lo \
-@USE_LIBTOOL_TRUE@psignal.lo pwrite.lo raise.lo realloc.lo reallocr.lo \
-@USE_LIBTOOL_TRUE@rename.lo resource.lo sched.lo select.lo seteuid.lo \
-@USE_LIBTOOL_TRUE@sethostname.lo shm_open.lo shm_unlink.lo sig.lo \
-@USE_LIBTOOL_TRUE@sigaction.lo sigqueue.lo signal.lo siglongjmp.lo \
-@USE_LIBTOOL_TRUE@sigset.lo sigwait.lo socket.lo sleep.lo strsignal.lo \
-@USE_LIBTOOL_TRUE@strverscmp.lo sysconf.lo sysctl.lo systat.lo \
-@USE_LIBTOOL_TRUE@tcdrain.lo tcsendbrk.lo termios.lo time.lo usleep.lo \
-@USE_LIBTOOL_TRUE@versionsort.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-DIST_SUBDIRS =  machine argp cmath @EXTRA_SUBDIRS@ .
-SOURCES = $(lib_a_SOURCES) $(liblinux_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(liblinux_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-liblinux.la: $(liblinux_la_OBJECTS) $(liblinux_la_DEPENDENCIES)
-	$(LINK)  $(liblinux_la_LDFLAGS) $(liblinux_la_OBJECTS) $(liblinux_la_LIBADD) $(LIBS)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" != "." || dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(DIST_SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-@USE_LIBTOOL_FALSE@lib.a:  $(ADD_OBJS) $(LIB_OBJS) $(lib_a_OBJECTS)
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-@USE_LIBTOOL_FALSE@	mkdir tmp
-@USE_LIBTOOL_FALSE@	cd tmp; \
-@USE_LIBTOOL_FALSE@	for i in $(SUBLIBS); do \
-@USE_LIBTOOL_FALSE@	  $(AR) x ../$$i; \
-@USE_LIBTOOL_FALSE@	done; \
-@USE_LIBTOOL_FALSE@	$(AR) $(AR_FLAGS) ../$@ *.o
-@USE_LIBTOOL_FALSE@	$(RANLIB) $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-
-objectlist.awk.in: $(noinst_LTLIBRARIES) $(SUBLIBS)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	  do \
-	    echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-	for j in $(SUBLIBS) ; \
-	  do \
-	    export i=`echo $$j | sed -e 's,\(.*\)\/[^\/]*$$,\1,'`; \
-	    if test $$i != "." && test -f $$i/objectlist.awk.in; then \
-	    	cat $$i/objectlist.awk.in >> objectlist.awk.in ; \
-	    fi; \
-	done
-
-all: crt0.o crt1.o
-
-crt0.o: machine/crt0.o
-	rm -f $@
-	ln machine/crt0.o $@ >/dev/null 2>/dev/null || cp machine/crt0.o $@
-
-machine/crt0.o: ; @true
-
-sig.$(oext):	siglist.inc
-
-siglist.inc:
-		$(AWK) '/#define.SIG.*[1-9][0-9]*/ { n[$$3] = $$2 } \
-		  /#define.NSIG.*[1-9][0-9]*/ { max = $$3 } \
-		  /#define.SIGUNUSED/ \
-		    { for (i = 0; i <= max; i++) print "\"" n[i] "\"," }' \
-		    < $(SIGNAL_H) > siglist.inc || \
-		    { rm -f siglist.inc; exit 1; }
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/aclocal.m4 b/newlib/libc/sys/linux/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/aio.c b/newlib/libc/sys/linux/aio.c
deleted file mode 100644
index de988ebfc..000000000
--- a/newlib/libc/sys/linux/aio.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* libc/sys/linux/aio.c - asychronous I/O */
-
-/* Copyright 2002, Red Hat Inc. */
-
-/* Currently asynchronous I/O is not implemented. */
-
-#include <sys/types.h>
-#include <aio.h>
-#include <errno.h>
-
-int
-aio_cancel (int fd, struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_error (const struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_fsync (int op, struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_read (struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-ssize_t
-aio_return (struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_suspend (const struct aiocb *const list[], int nent,
-             const struct timespec *timeout)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_write (struct aiocb *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-lio_listio (int mode, struct aiocb * const list[], int nent,
-            struct sigevent *sig)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-void 
-aio_init (const struct aioinit *INIT)
-{
-  errno = ENOSYS;
-}
-#endif
diff --git a/newlib/libc/sys/linux/aio64.c b/newlib/libc/sys/linux/aio64.c
deleted file mode 100644
index 5a9cdd928..000000000
--- a/newlib/libc/sys/linux/aio64.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* libc/sys/linux/aio64.c - asychronous I/O */
-
-/* Copyright 2002, Red Hat Inc. */
-
-/* Currently asynchronous I/O is not implemented. */
-
-#include <sys/types.h>
-#include <aio.h>
-#include <errno.h>
-
-int
-aio_cancel64 (int fd, struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_error64 (const struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_fsync64 (int op, struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_read64 (struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-ssize_t
-aio_return64 (struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_suspend64 (const struct aiocb64 *const list[], int nent,
-             const struct timespec *timeout)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-aio_write64 (struct aiocb64 *cb)
-{
-  errno = ENOSYS;
-  return -1;
-}
-
-int
-lio_listio64 (int mode, struct aiocb64 * const list[], int nent,
-              struct sigevent *sig)
-{
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/linux/argp/Makefile.am b/newlib/libc/sys/linux/argp/Makefile.am
deleted file mode 100644
index 95869fec5..000000000
--- a/newlib/libc/sys/linux/argp/Makefile.am
+++ /dev/null
@@ -1,23 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	argp-ba.c  argp-eexst.c  argp-fmtstream.c  argp-fs-xinl.c \
-	argp-help.c  argp-parse.c  argp-pv.c  argp-pvh.c  argp-xinl.c
-
-libargp_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libargp.la
-libargp_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
diff --git a/newlib/libc/sys/linux/argp/Makefile.in b/newlib/libc/sys/linux/argp/Makefile.in
deleted file mode 100644
index aa66a62b0..000000000
--- a/newlib/libc/sys/linux/argp/Makefile.in
+++ /dev/null
@@ -1,367 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	argp-ba.c  argp-eexst.c  argp-fmtstream.c  argp-fs-xinl.c \
-	argp-help.c  argp-parse.c  argp-pv.c  argp-pvh.c  argp-xinl.c
-
-
-libargp_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libargp.la
-@USE_LIBTOOL_TRUE@libargp_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  argp-ba.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@argp-eexst.$(OBJEXT) argp-fmtstream.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@argp-fs-xinl.$(OBJEXT) argp-help.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@argp-parse.$(OBJEXT) argp-pv.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@argp-pvh.$(OBJEXT) argp-xinl.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libargp_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libargp_la_OBJECTS =  argp-ba.lo argp-eexst.lo \
-@USE_LIBTOOL_TRUE@argp-fmtstream.lo argp-fs-xinl.lo argp-help.lo \
-@USE_LIBTOOL_TRUE@argp-parse.lo argp-pv.lo argp-pvh.lo argp-xinl.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libargp_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libargp_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus argp/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libargp.la: $(libargp_la_OBJECTS) $(libargp_la_DEPENDENCIES)
-	$(LINK)  $(libargp_la_LDFLAGS) $(libargp_la_OBJECTS) $(libargp_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = argp
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/argp/argp-ba.c b/newlib/libc/sys/linux/argp/argp-ba.c
deleted file mode 100644
index f5270c88d..000000000
--- a/newlib/libc/sys/linux/argp/argp-ba.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Default definition for ARGP_PROGRAM_BUG_ADDRESS.
-   Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* If set by the user program, it should point to string that is the
-   bug-reporting address for the program.  It will be printed by argp_help if
-   the ARGP_HELP_BUG_ADDR flag is set (as it is by various standard help
-   messages), embedded in a sentence that says something like `Report bugs to
-   ADDR.'.  */
-const char *argp_program_bug_address;
diff --git a/newlib/libc/sys/linux/argp/argp-eexst.c b/newlib/libc/sys/linux/argp/argp-eexst.c
deleted file mode 100644
index a94c34674..000000000
--- a/newlib/libc/sys/linux/argp/argp-eexst.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Default definition for ARGP_ERR_EXIT_STATUS
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <sysexits.h>
-
-#include <argp.h>
-
-/* The exit status that argp will use when exiting due to a parsing error.
-   If not defined or set by the user program, this defaults to EX_USAGE from
-   <sysexits.h>.  */
-error_t argp_err_exit_status = EX_USAGE;
diff --git a/newlib/libc/sys/linux/argp/argp-fmtstream.c b/newlib/libc/sys/linux/argp/argp-fmtstream.c
deleted file mode 100644
index f783b803b..000000000
--- a/newlib/libc/sys/linux/argp/argp-fmtstream.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/* Word-wrapping and line-truncating streams
-   Copyright (C) 1997, 1998, 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This package emulates glibc `line_wrap_stream' semantics for systems that
-   don't have that.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <ctype.h>
-
-#include "argp-fmtstream.h"
-#include "argp-namefrob.h"
-
-#ifndef ARGP_FMTSTREAM_USE_LINEWRAP
-
-#ifndef isblank
-#define isblank(ch) ((ch)==' ' || (ch)=='\t')
-#endif
-
-#if defined _LIBC && defined USE_IN_LIBIO
-# include <wchar.h>
-# include <libio/libioP.h>
-# define __vsnprintf(s, l, f, a) _IO_vsnprintf (s, l, f, a)
-#endif
-
-#define INIT_BUF_SIZE 200
-#define PRINTF_SIZE_GUESS 150
-
-/* Return an argp_fmtstream that outputs to STREAM, and which prefixes lines
-   written on it with LMARGIN spaces and limits them to RMARGIN columns
-   total.  If WMARGIN >= 0, words that extend past RMARGIN are wrapped by
-   replacing the whitespace before them with a newline and WMARGIN spaces.
-   Otherwise, chars beyond RMARGIN are simply dropped until a newline.
-   Returns NULL if there was an error.  */
-argp_fmtstream_t
-__argp_make_fmtstream (FILE *stream,
-		       size_t lmargin, size_t rmargin, ssize_t wmargin)
-{
-  argp_fmtstream_t fs;
-
-  fs = (struct argp_fmtstream *) malloc (sizeof (struct argp_fmtstream));
-  if (fs != NULL)
-    {
-      fs->stream = stream;
-
-      fs->lmargin = lmargin;
-      fs->rmargin = rmargin;
-      fs->wmargin = wmargin;
-      fs->point_col = 0;
-      fs->point_offs = 0;
-
-      fs->buf = (char *) malloc (INIT_BUF_SIZE);
-      if (! fs->buf)
-	{
-	  free (fs);
-	  fs = 0;
-	}
-      else
-	{
-	  fs->p = fs->buf;
-	  fs->end = fs->buf + INIT_BUF_SIZE;
-	}
-    }
-
-  return fs;
-}
-#ifdef weak_alias
-weak_alias (__argp_make_fmtstream, argp_make_fmtstream)
-#endif
-
-/* Flush FS to its stream, and free it (but don't close the stream).  */
-void
-__argp_fmtstream_free (argp_fmtstream_t fs)
-{
-  __argp_fmtstream_update (fs);
-  if (fs->p > fs->buf)
-    {
-#ifdef USE_IN_LIBIO
-      if (_IO_fwide (fs->stream, 0) > 0)
-	__fwprintf (fs->stream, L"%.*s", (int) (fs->p - fs->buf), fs->buf);
-      else
-#endif
-	fwrite (fs->buf, 1, fs->p - fs->buf, fs->stream);
-    }
-  free (fs->buf);
-  free (fs);
-}
-#ifdef weak_alias
-weak_alias (__argp_fmtstream_free, argp_fmtstream_free)
-#endif
-
-/* Process FS's buffer so that line wrapping is done from POINT_OFFS to the
-   end of its buffer.  This code is mostly from glibc stdio/linewrap.c.  */
-void
-__argp_fmtstream_update (argp_fmtstream_t fs)
-{
-  char *buf, *nl;
-  size_t len;
-
-  /* Scan the buffer for newlines.  */
-  buf = fs->buf + fs->point_offs;
-  while (buf < fs->p)
-    {
-      size_t r;
-
-      if (fs->point_col == 0 && fs->lmargin != 0)
-	{
-	  /* We are starting a new line.  Print spaces to the left margin.  */
-	  const size_t pad = fs->lmargin;
-	  if (fs->p + pad < fs->end)
-	    {
-	      /* We can fit in them in the buffer by moving the
-		 buffer text up and filling in the beginning.  */
-	      memmove (buf + pad, buf, fs->p - buf);
-	      fs->p += pad; /* Compensate for bigger buffer. */
-	      memset (buf, ' ', pad); /* Fill in the spaces.  */
-	      buf += pad; /* Don't bother searching them.  */
-	    }
-	  else
-	    {
-	      /* No buffer space for spaces.  Must flush.  */
-	      size_t i;
-	      for (i = 0; i < pad; i++)
-		{
-#ifdef USE_IN_LIBIO
-		  if (_IO_fwide (fs->stream, 0) > 0)
-		    putwc_unlocked (L' ', fs->stream);
-		  else
-#endif
-		    putc_unlocked (' ', fs->stream);
-		}
-	    }
-	  fs->point_col = pad;
-	}
-
-      len = fs->p - buf;
-      nl = memchr (buf, '\n', len);
-
-      if (fs->point_col < 0)
-	fs->point_col = 0;
-
-      if (!nl)
-	{
-	  /* The buffer ends in a partial line.  */
-
-	  if (fs->point_col + len < fs->rmargin)
-	    {
-	      /* The remaining buffer text is a partial line and fits
-		 within the maximum line width.  Advance point for the
-		 characters to be written and stop scanning.  */
-	      fs->point_col += len;
-	      break;
-	    }
-	  else
-	    /* Set the end-of-line pointer for the code below to
-	       the end of the buffer.  */
-	    nl = fs->p;
-	}
-      else if (fs->point_col + (nl - buf) < (ssize_t) fs->rmargin)
-	{
-	  /* The buffer contains a full line that fits within the maximum
-	     line width.  Reset point and scan the next line.  */
-	  fs->point_col = 0;
-	  buf = nl + 1;
-	  continue;
-	}
-
-      /* This line is too long.  */
-      r = fs->rmargin - 1;
-
-      if (fs->wmargin < 0)
-	{
-	  /* Truncate the line by overwriting the excess with the
-	     newline and anything after it in the buffer.  */
-	  if (nl < fs->p)
-	    {
-	      memmove (buf + (r - fs->point_col), nl, fs->p - nl);
-	      fs->p -= buf + (r - fs->point_col) - nl;
-	      /* Reset point for the next line and start scanning it.  */
-	      fs->point_col = 0;
-	      buf += r + 1; /* Skip full line plus \n. */
-	    }
-	  else
-	    {
-	      /* The buffer ends with a partial line that is beyond the
-		 maximum line width.  Advance point for the characters
-		 written, and discard those past the max from the buffer.  */
-	      fs->point_col += len;
-	      fs->p -= fs->point_col - r;
-	      break;
-	    }
-	}
-      else
-	{
-	  /* Do word wrap.  Go to the column just past the maximum line
-	     width and scan back for the beginning of the word there.
-	     Then insert a line break.  */
-
-	  char *p, *nextline;
-	  int i;
-
-	  p = buf + (r + 1 - fs->point_col);
-	  while (p >= buf && !isblank (*p))
-	    --p;
-	  nextline = p + 1;	/* This will begin the next line.  */
-
-	  if (nextline > buf)
-	    {
-	      /* Swallow separating blanks.  */
-	      if (p >= buf)
-		do
-		  --p;
-		while (p >= buf && isblank (*p));
-	      nl = p + 1;	/* The newline will replace the first blank. */
-	    }
-	  else
-	    {
-	      /* A single word that is greater than the maximum line width.
-		 Oh well.  Put it on an overlong line by itself.  */
-	      p = buf + (r + 1 - fs->point_col);
-	      /* Find the end of the long word.  */
-	      do
-		++p;
-	      while (p < nl && !isblank (*p));
-	      if (p == nl)
-		{
-		  /* It already ends a line.  No fussing required.  */
-		  fs->point_col = 0;
-		  buf = nl + 1;
-		  continue;
-		}
-	      /* We will move the newline to replace the first blank.  */
-	      nl = p;
-	      /* Swallow separating blanks.  */
-	      do
-		++p;
-	      while (isblank (*p));
-	      /* The next line will start here.  */
-	      nextline = p;
-	    }
-
-	  /* Note: There are a bunch of tests below for
-	     NEXTLINE == BUF + LEN + 1; this case is where NL happens to fall
-	     at the end of the buffer, and NEXTLINE is in fact empty (and so
-	     we need not be careful to maintain its contents).  */
-
-	  if (nextline == buf + len + 1
-	      ? fs->end - nl < fs->wmargin + 1
-	      : nextline - (nl + 1) < fs->wmargin)
-	    {
-	      /* The margin needs more blanks than we removed.  */
-	      if (fs->end - fs->p > fs->wmargin + 1)
-		/* Make some space for them.  */
-		{
-		  size_t mv = fs->p - nextline;
-		  memmove (nl + 1 + fs->wmargin, nextline, mv);
-		  nextline = nl + 1 + fs->wmargin;
-		  len = nextline + mv - buf;
-		  *nl++ = '\n';
-		}
-	      else
-		/* Output the first line so we can use the space.  */
-		{
-#ifdef USE_IN_LIBIO
-		  if (_IO_fwide (fs->stream, 0) > 0)
-		    __fwprintf (fs->stream, L"%.*s\n",
-				(int) (nl - fs->buf), fs->buf);
-		  else
-#endif
-		    {
-		      if (nl > fs->buf)
-			fwrite (fs->buf, 1, nl - fs->buf, fs->stream);
-		      putc_unlocked ('\n', fs->stream);
-		    }
-		  len += buf - fs->buf;
-		  nl = buf = fs->buf;
-		}
-	    }
-	  else
-	    /* We can fit the newline and blanks in before
-	       the next word.  */
-	    *nl++ = '\n';
-
-	  if (nextline - nl >= fs->wmargin
-	      || (nextline == buf + len + 1 && fs->end - nextline >= fs->wmargin))
-	    /* Add blanks up to the wrap margin column.  */
-	    for (i = 0; i < fs->wmargin; ++i)
-	      *nl++ = ' ';
-	  else
-	    for (i = 0; i < fs->wmargin; ++i)
-#ifdef USE_IN_LIBIO
-	      if (_IO_fwide (fs->stream, 0) > 0)
-		putwc_unlocked (L' ', fs->stream);
-	      else
-#endif
-		putc_unlocked (' ', fs->stream);
-
-	  /* Copy the tail of the original buffer into the current buffer
-	     position.  */
-	  if (nl < nextline)
-	    memmove (nl, nextline, buf + len - nextline);
-	  len -= nextline - buf;
-
-	  /* Continue the scan on the remaining lines in the buffer.  */
-	  buf = nl;
-
-	  /* Restore bufp to include all the remaining text.  */
-	  fs->p = nl + len;
-
-	  /* Reset the counter of what has been output this line.  If wmargin
-	     is 0, we want to avoid the lmargin getting added, so we set
-	     point_col to a magic value of -1 in that case.  */
-	  fs->point_col = fs->wmargin ? fs->wmargin : -1;
-	}
-    }
-
-  /* Remember that we've scanned as far as the end of the buffer.  */
-  fs->point_offs = fs->p - fs->buf;
-}
-
-/* Ensure that FS has space for AMOUNT more bytes in its buffer, either by
-   growing the buffer, or by flushing it.  True is returned iff we succeed. */
-int
-__argp_fmtstream_ensure (struct argp_fmtstream *fs, size_t amount)
-{
-  if ((size_t) (fs->end - fs->p) < amount)
-    {
-      ssize_t wrote;
-
-      /* Flush FS's buffer.  */
-      __argp_fmtstream_update (fs);
-
-#ifdef USE_IN_LIBIO
-      if (_IO_fwide (fs->stream, 0) > 0)
-	{
-	  __fwprintf (fs->stream, L"%.*s", (int) (fs->p - fs->buf), fs->buf);
-	  wrote = fs->p - fs->buf;
-	}
-      else
-#endif
-	wrote = fwrite (fs->buf, 1, fs->p - fs->buf, fs->stream);
-      if (wrote == fs->p - fs->buf)
-	{
-	  fs->p = fs->buf;
-	  fs->point_offs = 0;
-	}
-      else
-	{
-	  fs->p -= wrote;
-	  fs->point_offs -= wrote;
-	  memmove (fs->buf, fs->buf + wrote, fs->p - fs->buf);
-	  return 0;
-	}
-
-      if ((size_t) (fs->end - fs->buf) < amount)
-	/* Gotta grow the buffer.  */
-	{
-	  size_t new_size = fs->end - fs->buf + amount;
-	  char *new_buf = realloc (fs->buf, new_size);
-
-	  if (! new_buf)
-	    {
-	      __set_errno (ENOMEM);
-	      return 0;
-	    }
-
-	  fs->buf = new_buf;
-	  fs->end = new_buf + new_size;
-	  fs->p = fs->buf;
-	}
-    }
-
-  return 1;
-}
-
-ssize_t
-__argp_fmtstream_printf (struct argp_fmtstream *fs, const char *fmt, ...)
-{
-  int out;
-  size_t avail;
-  size_t size_guess = PRINTF_SIZE_GUESS; /* How much space to reserve. */
-
-  do
-    {
-      va_list args;
-
-      if (! __argp_fmtstream_ensure (fs, size_guess))
-	return -1;
-
-      va_start (args, fmt);
-      avail = fs->end - fs->p;
-      out = __vsnprintf (fs->p, avail, fmt, args);
-      va_end (args);
-      if (out >= avail)
-	size_guess = out + 1;
-    }
-  while (out >= avail);
-
-  fs->p += out;
-
-  return out;
-}
-#ifdef weak_alias
-weak_alias (__argp_fmtstream_printf, argp_fmtstream_printf)
-#endif
-
-#endif /* !ARGP_FMTSTREAM_USE_LINEWRAP */
diff --git a/newlib/libc/sys/linux/argp/argp-fmtstream.h b/newlib/libc/sys/linux/argp/argp-fmtstream.h
deleted file mode 100644
index 7a291e28c..000000000
--- a/newlib/libc/sys/linux/argp/argp-fmtstream.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/* Word-wrapping and line-truncating streams.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This package emulates glibc `line_wrap_stream' semantics for systems that
-   don't have that.  If the system does have it, it is just a wrapper for
-   that.  This header file is only used internally while compiling argp, and
-   shouldn't be installed.  */
-
-#ifndef _ARGP_FMTSTREAM_H
-#define _ARGP_FMTSTREAM_H
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#if    (_LIBC - 0 && !defined (USE_IN_LIBIO)) \
-    || (defined (__GNU_LIBRARY__) && defined (HAVE_LINEWRAP_H))
-/* line_wrap_stream is available, so use that.  */
-#define ARGP_FMTSTREAM_USE_LINEWRAP
-#endif
-
-#ifdef ARGP_FMTSTREAM_USE_LINEWRAP
-/* Just be a simple wrapper for line_wrap_stream; the semantics are
-   *slightly* different, as line_wrap_stream doesn't actually make a new
-   object, it just modifies the given stream (reversibly) to do
-   line-wrapping.  Since we control who uses this code, it doesn't matter.  */
-
-#include <linewrap.h>
-
-typedef FILE *argp_fmtstream_t;
-
-#define argp_make_fmtstream line_wrap_stream
-#define __argp_make_fmtstream line_wrap_stream
-#define argp_fmtstream_free line_unwrap_stream
-#define __argp_fmtstream_free line_unwrap_stream
-
-#define __argp_fmtstream_putc(fs,ch) putc(ch,fs)
-#define argp_fmtstream_putc(fs,ch) putc(ch,fs)
-#define __argp_fmtstream_puts(fs,str) fputs(str,fs)
-#define argp_fmtstream_puts(fs,str) fputs(str,fs)
-#define __argp_fmtstream_write(fs,str,len) fwrite(str,1,len,fs)
-#define argp_fmtstream_write(fs,str,len) fwrite(str,1,len,fs)
-#define __argp_fmtstream_printf fprintf
-#define argp_fmtstream_printf fprintf
-
-#define __argp_fmtstream_lmargin line_wrap_lmargin
-#define argp_fmtstream_lmargin line_wrap_lmargin
-#define __argp_fmtstream_set_lmargin line_wrap_set_lmargin
-#define argp_fmtstream_set_lmargin line_wrap_set_lmargin
-#define __argp_fmtstream_rmargin line_wrap_rmargin
-#define argp_fmtstream_rmargin line_wrap_rmargin
-#define __argp_fmtstream_set_rmargin line_wrap_set_rmargin
-#define argp_fmtstream_set_rmargin line_wrap_set_rmargin
-#define __argp_fmtstream_wmargin line_wrap_wmargin
-#define argp_fmtstream_wmargin line_wrap_wmargin
-#define __argp_fmtstream_set_wmargin line_wrap_set_wmargin
-#define argp_fmtstream_set_wmargin line_wrap_set_wmargin
-#define __argp_fmtstream_point line_wrap_point
-#define argp_fmtstream_point line_wrap_point
-
-#else /* !ARGP_FMTSTREAM_USE_LINEWRAP */
-/* Guess we have to define our own version.  */
-
-#ifndef __const
-#define __const const
-#endif
-
-struct argp_fmtstream
-{
-  FILE *stream;			/* The stream we're outputting to.  */
-
-  size_t lmargin, rmargin;	/* Left and right margins.  */
-  ssize_t wmargin;		/* Margin to wrap to, or -1 to truncate.  */
-
-  /* Point in buffer to which we've processed for wrapping, but not output.  */
-  size_t point_offs;
-  /* Output column at POINT_OFFS, or -1 meaning 0 but don't add lmargin.  */
-  ssize_t point_col;
-
-  char *buf;			/* Output buffer.  */
-  char *p;			/* Current end of text in BUF. */
-  char *end;			/* Absolute end of BUF.  */
-};
-
-typedef struct argp_fmtstream *argp_fmtstream_t;
-
-/* Return an argp_fmtstream that outputs to STREAM, and which prefixes lines
-   written on it with LMARGIN spaces and limits them to RMARGIN columns
-   total.  If WMARGIN >= 0, words that extend past RMARGIN are wrapped by
-   replacing the whitespace before them with a newline and WMARGIN spaces.
-   Otherwise, chars beyond RMARGIN are simply dropped until a newline.
-   Returns NULL if there was an error.  */
-extern argp_fmtstream_t __argp_make_fmtstream (FILE *__stream,
-					       size_t __lmargin,
-					       size_t __rmargin,
-					       ssize_t __wmargin);
-extern argp_fmtstream_t argp_make_fmtstream (FILE *__stream,
-					     size_t __lmargin,
-					     size_t __rmargin,
-					     ssize_t __wmargin);
-
-/* Flush __FS to its stream, and free it (but don't close the stream).  */
-extern void __argp_fmtstream_free (argp_fmtstream_t __fs);
-extern void argp_fmtstream_free (argp_fmtstream_t __fs);
-
-extern ssize_t __argp_fmtstream_printf (argp_fmtstream_t __fs,
-				       __const char *__fmt, ...)
-     __attribute__ ((__format__ (printf, 2, 3)));
-extern ssize_t argp_fmtstream_printf (argp_fmtstream_t __fs,
-				      __const char *__fmt, ...)
-     __attribute__ ((__format__ (printf, 2, 3)));
-
-extern int __argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch);
-extern int argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch);
-
-extern int __argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str);
-extern int argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str);
-
-extern size_t __argp_fmtstream_write (argp_fmtstream_t __fs,
-				      __const char *__str, size_t __len);
-extern size_t argp_fmtstream_write (argp_fmtstream_t __fs,
-				    __const char *__str, size_t __len);
-
-/* Access macros for various bits of state.  */
-#define argp_fmtstream_lmargin(__fs) ((__fs)->lmargin)
-#define argp_fmtstream_rmargin(__fs) ((__fs)->rmargin)
-#define argp_fmtstream_wmargin(__fs) ((__fs)->wmargin)
-#define __argp_fmtstream_lmargin argp_fmtstream_lmargin
-#define __argp_fmtstream_rmargin argp_fmtstream_rmargin
-#define __argp_fmtstream_wmargin argp_fmtstream_wmargin
-
-/* Set __FS's left margin to LMARGIN and return the old value.  */
-extern size_t argp_fmtstream_set_lmargin (argp_fmtstream_t __fs,
-					  size_t __lmargin);
-extern size_t __argp_fmtstream_set_lmargin (argp_fmtstream_t __fs,
-					    size_t __lmargin);
-
-/* Set __FS's right margin to __RMARGIN and return the old value.  */
-extern size_t argp_fmtstream_set_rmargin (argp_fmtstream_t __fs,
-					  size_t __rmargin);
-extern size_t __argp_fmtstream_set_rmargin (argp_fmtstream_t __fs,
-					    size_t __rmargin);
-
-/* Set __FS's wrap margin to __WMARGIN and return the old value.  */
-extern size_t argp_fmtstream_set_wmargin (argp_fmtstream_t __fs,
-					  size_t __wmargin);
-extern size_t __argp_fmtstream_set_wmargin (argp_fmtstream_t __fs,
-					    size_t __wmargin);
-
-/* Return the column number of the current output point in __FS.  */
-extern size_t argp_fmtstream_point (argp_fmtstream_t __fs);
-extern size_t __argp_fmtstream_point (argp_fmtstream_t __fs);
-
-/* Internal routines.  */
-extern void _argp_fmtstream_update (argp_fmtstream_t __fs);
-extern void __argp_fmtstream_update (argp_fmtstream_t __fs);
-extern int _argp_fmtstream_ensure (argp_fmtstream_t __fs, size_t __amount);
-extern int __argp_fmtstream_ensure (argp_fmtstream_t __fs, size_t __amount);
-
-#ifdef __OPTIMIZE__
-/* Inline versions of above routines.  */
-
-#if !_LIBC
-#define __argp_fmtstream_putc argp_fmtstream_putc
-#define __argp_fmtstream_puts argp_fmtstream_puts
-#define __argp_fmtstream_write argp_fmtstream_write
-#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
-#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
-#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
-#define __argp_fmtstream_point argp_fmtstream_point
-#define __argp_fmtstream_update _argp_fmtstream_update
-#define __argp_fmtstream_ensure _argp_fmtstream_ensure
-#endif
-
-#ifndef ARGP_FS_EI
-#define ARGP_FS_EI extern inline
-#endif
-
-ARGP_FS_EI size_t
-__argp_fmtstream_write (argp_fmtstream_t __fs,
-			__const char *__str, size_t __len)
-{
-  if (__fs->p + __len <= __fs->end || __argp_fmtstream_ensure (__fs, __len))
-    {
-      memcpy (__fs->p, __str, __len);
-      __fs->p += __len;
-      return __len;
-    }
-  else
-    return 0;
-}
-
-ARGP_FS_EI int
-__argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str)
-{
-  size_t __len = strlen (__str);
-  if (__len)
-    {
-      size_t __wrote = __argp_fmtstream_write (__fs, __str, __len);
-      return __wrote == __len ? 0 : -1;
-    }
-  else
-    return 0;
-}
-
-ARGP_FS_EI int
-__argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch)
-{
-  if (__fs->p < __fs->end || __argp_fmtstream_ensure (__fs, 1))
-    return *__fs->p++ = __ch;
-  else
-    return EOF;
-}
-
-/* Set __FS's left margin to __LMARGIN and return the old value.  */
-ARGP_FS_EI size_t
-__argp_fmtstream_set_lmargin (argp_fmtstream_t __fs, size_t __lmargin)
-{
-  size_t __old;
-  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
-    __argp_fmtstream_update (__fs);
-  __old = __fs->lmargin;
-  __fs->lmargin = __lmargin;
-  return __old;
-}
-
-/* Set __FS's right margin to __RMARGIN and return the old value.  */
-ARGP_FS_EI size_t
-__argp_fmtstream_set_rmargin (argp_fmtstream_t __fs, size_t __rmargin)
-{
-  size_t __old;
-  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
-    __argp_fmtstream_update (__fs);
-  __old = __fs->rmargin;
-  __fs->rmargin = __rmargin;
-  return __old;
-}
-
-/* Set FS's wrap margin to __WMARGIN and return the old value.  */
-ARGP_FS_EI size_t
-__argp_fmtstream_set_wmargin (argp_fmtstream_t __fs, size_t __wmargin)
-{
-  size_t __old;
-  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
-    __argp_fmtstream_update (__fs);
-  __old = __fs->wmargin;
-  __fs->wmargin = __wmargin;
-  return __old;
-}
-
-/* Return the column number of the current output point in __FS.  */
-ARGP_FS_EI size_t
-__argp_fmtstream_point (argp_fmtstream_t __fs)
-{
-  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
-    __argp_fmtstream_update (__fs);
-  return __fs->point_col >= 0 ? __fs->point_col : 0;
-}
-
-#if !_LIBC
-#undef __argp_fmtstream_putc
-#undef __argp_fmtstream_puts
-#undef __argp_fmtstream_write
-#undef __argp_fmtstream_set_lmargin
-#undef __argp_fmtstream_set_rmargin
-#undef __argp_fmtstream_set_wmargin
-#undef __argp_fmtstream_point
-#undef __argp_fmtstream_update
-#undef __argp_fmtstream_ensure
-#endif
-
-#endif /* __OPTIMIZE__ */
-
-#endif /* ARGP_FMTSTREAM_USE_LINEWRAP */
-
-#endif /* argp-fmtstream.h */
diff --git a/newlib/libc/sys/linux/argp/argp-fs-xinl.c b/newlib/libc/sys/linux/argp/argp-fs-xinl.c
deleted file mode 100644
index b61a303e8..000000000
--- a/newlib/libc/sys/linux/argp/argp-fs-xinl.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Real definitions for extern inline functions in argp-fmtstream.h
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#define ARGP_FS_EI
-#undef __OPTIMIZE__
-#define __OPTIMIZE__
-#include "argp-fmtstream.h"
-
-/* Add weak aliases.  */
-#if _LIBC - 0 && !defined (ARGP_FMTSTREAM_USE_LINEWRAP) && defined (weak_alias)
-
-weak_alias (__argp_fmtstream_putc, argp_fmtstream_putc)
-weak_alias (__argp_fmtstream_puts, argp_fmtstream_puts)
-weak_alias (__argp_fmtstream_write, argp_fmtstream_write)
-weak_alias (__argp_fmtstream_set_lmargin, argp_fmtstream_set_lmargin)
-weak_alias (__argp_fmtstream_set_rmargin, argp_fmtstream_set_rmargin)
-weak_alias (__argp_fmtstream_set_wmargin, argp_fmtstream_set_wmargin)
-weak_alias (__argp_fmtstream_point, argp_fmtstream_point)
-
-#endif
diff --git a/newlib/libc/sys/linux/argp/argp-help.c b/newlib/libc/sys/linux/argp/argp-help.c
deleted file mode 100644
index d1523693b..000000000
--- a/newlib/libc/sys/linux/argp/argp-help.c
+++ /dev/null
@@ -1,1863 +0,0 @@
-/* Hierarchial argument parsing help output
-   Copyright (C) 1995-2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE	1
-#endif
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#ifndef alloca
-# ifdef __GNUC__
-#  define alloca __builtin_alloca
-#  define HAVE_ALLOCA 1
-# else
-#  if defined HAVE_ALLOCA_H || defined _LIBC
-#   include <alloca.h>
-#  else
-#   ifdef _AIX
- #pragma alloca
-#   else
-#    ifndef alloca
-char *alloca ();
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-#include <stdarg.h>
-#include <malloc.h>
-#include <ctype.h>
-#ifdef USE_IN_LIBIO
-# include <wchar.h>
-#endif
-
-#ifndef _
-/* This is for other GNU distributions with internationalized messages.  */
-# if defined HAVE_LIBINTL_H || defined _LIBC
-#  include <libintl.h>
-#  ifdef _LIBC
-#   undef dgettext
-#   define dgettext(domain, msgid) __dcgettext (domain, msgid, LC_MESSAGES)
-#  endif
-# else
-#  define dgettext(domain, msgid) (msgid)
-# endif
-#endif
-
-#include <argp.h>
-#include "argp-fmtstream.h"
-#include "argp-namefrob.h"
-
-/* User-selectable (using an environment variable) formatting parameters.
-
-   These may be specified in an environment variable called `ARGP_HELP_FMT',
-   with a contents like:  VAR1=VAL1,VAR2=VAL2,BOOLVAR2,no-BOOLVAR2
-   Where VALn must be a positive integer.  The list of variables is in the
-   UPARAM_NAMES vector, below.  */
-
-/* Default parameters.  */
-#define DUP_ARGS      0		/* True if option argument can be duplicated. */
-#define DUP_ARGS_NOTE 1		/* True to print a note about duplicate args. */
-#define SHORT_OPT_COL 2		/* column in which short options start */
-#define LONG_OPT_COL  6		/* column in which long options start */
-#define DOC_OPT_COL   2		/* column in which doc options start */
-#define OPT_DOC_COL  29		/* column in which option text starts */
-#define HEADER_COL    1		/* column in which group headers are printed */
-#define USAGE_INDENT 12		/* indentation of wrapped usage lines */
-#define RMARGIN      79		/* right margin used for wrapping */
-
-/* User-selectable (using an environment variable) formatting parameters.
-   They must all be of type `int' for the parsing code to work.  */
-struct uparams
-{
-  /* If true, arguments for an option are shown with both short and long
-     options, even when a given option has both, e.g. `-x ARG, --longx=ARG'.
-     If false, then if an option has both, the argument is only shown with
-     the long one, e.g., `-x, --longx=ARG', and a message indicating that
-     this really means both is printed below the options.  */
-  int dup_args;
-
-  /* This is true if when DUP_ARGS is false, and some duplicate arguments have
-     been suppressed, an explanatory message should be printed.  */
-  int dup_args_note;
-
-  /* Various output columns.  */
-  int short_opt_col;
-  int long_opt_col;
-  int doc_opt_col;
-  int opt_doc_col;
-  int header_col;
-  int usage_indent;
-  int rmargin;
-
-  int valid;			/* True when the values in here are valid.  */
-};
-
-/* This is a global variable, as user options are only ever read once.  */
-static struct uparams uparams = {
-  DUP_ARGS, DUP_ARGS_NOTE,
-  SHORT_OPT_COL, LONG_OPT_COL, DOC_OPT_COL, OPT_DOC_COL, HEADER_COL,
-  USAGE_INDENT, RMARGIN,
-  0
-};
-
-/* A particular uparam, and what the user name is.  */
-struct uparam_name
-{
-  const char *name;		/* User name.  */
-  int is_bool;			/* Whether it's `boolean'.  */
-  size_t uparams_offs;		/* Location of the (int) field in UPARAMS.  */
-};
-
-/* The name-field mappings we know about.  */
-static const struct uparam_name uparam_names[] =
-{
-  { "dup-args",       1, offsetof (struct uparams, dup_args) },
-  { "dup-args-note",  1, offsetof (struct uparams, dup_args_note) },
-  { "short-opt-col",  0, offsetof (struct uparams, short_opt_col) },
-  { "long-opt-col",   0, offsetof (struct uparams, long_opt_col) },
-  { "doc-opt-col",    0, offsetof (struct uparams, doc_opt_col) },
-  { "opt-doc-col",    0, offsetof (struct uparams, opt_doc_col) },
-  { "header-col",     0, offsetof (struct uparams, header_col) },
-  { "usage-indent",   0, offsetof (struct uparams, usage_indent) },
-  { "rmargin",        0, offsetof (struct uparams, rmargin) },
-  { 0 }
-};
-
-/* Read user options from the environment, and fill in UPARAMS appropiately.  */
-static void
-fill_in_uparams (const struct argp_state *state)
-{
-  const char *var = getenv ("ARGP_HELP_FMT");
-
-#define SKIPWS(p) do { while (isspace (*p)) p++; } while (0);
-
-  if (var)
-    /* Parse var. */
-    while (*var)
-      {
-	SKIPWS (var);
-
-	if (isalpha (*var))
-	  {
-	    size_t var_len;
-	    const struct uparam_name *un;
-	    int unspec = 0, val = 0;
-	    const char *arg = var;
-
-	    while (isalnum (*arg) || *arg == '-' || *arg == '_')
-	      arg++;
-	    var_len = arg - var;
-
-	    SKIPWS (arg);
-
-	    if (*arg == '\0' || *arg == ',')
-	      unspec = 1;
-	    else if (*arg == '=')
-	      {
-		arg++;
-		SKIPWS (arg);
-	      }
-
-	    if (unspec)
-	      {
-		if (var[0] == 'n' && var[1] == 'o' && var[2] == '-')
-		  {
-		    val = 0;
-		    var += 3;
-		    var_len -= 3;
-		  }
-		else
-		  val = 1;
-	      }
-	    else if (isdigit (*arg))
-	      {
-		val = atoi (arg);
-		while (isdigit (*arg))
-		  arg++;
-		SKIPWS (arg);
-	      }
-
-	    for (un = uparam_names; un->name; un++)
-	      if (strlen (un->name) == var_len
-		  && strncmp (var, un->name, var_len) == 0)
-		{
-		  if (unspec && !un->is_bool)
-		    __argp_failure (state, 0, 0,
-				    dgettext (state->root_argp->argp_domain, "\
-%.*s: ARGP_HELP_FMT parameter requires a value"),
-				    (int) var_len, var);
-		  else
-		    *(int *)((char *)&uparams + un->uparams_offs) = val;
-		  break;
-		}
-	    if (! un->name)
-	      __argp_failure (state, 0, 0,
-			      dgettext (state->root_argp->argp_domain, "\
-%.*s: Unknown ARGP_HELP_FMT parameter"),
-			      (int) var_len, var);
-
-	    var = arg;
-	    if (*var == ',')
-	      var++;
-	  }
-	else if (*var)
-	  {
-	    __argp_failure (state, 0, 0,
-			    dgettext (state->root_argp->argp_domain,
-				      "Garbage in ARGP_HELP_FMT: %s"), var);
-	    break;
-	  }
-      }
-}
-
-/* Returns true if OPT hasn't been marked invisible.  Visibility only affects
-   whether OPT is displayed or used in sorting, not option shadowing.  */
-#define ovisible(opt) (! ((opt)->flags & OPTION_HIDDEN))
-
-/* Returns true if OPT is an alias for an earlier option.  */
-#define oalias(opt) ((opt)->flags & OPTION_ALIAS)
-
-/* Returns true if OPT is an documentation-only entry.  */
-#define odoc(opt) ((opt)->flags & OPTION_DOC)
-
-/* Returns true if OPT is the end-of-list marker for a list of options.  */
-#define oend(opt) __option_is_end (opt)
-
-/* Returns true if OPT has a short option.  */
-#define oshort(opt) __option_is_short (opt)
-
-/*
-   The help format for a particular option is like:
-
-     -xARG, -yARG, --long1=ARG, --long2=ARG        Documentation...
-
-   Where ARG will be omitted if there's no argument, for this option, or
-   will be surrounded by "[" and "]" appropiately if the argument is
-   optional.  The documentation string is word-wrapped appropiately, and if
-   the list of options is long enough, it will be started on a separate line.
-   If there are no short options for a given option, the first long option is
-   indented slighly in a way that's supposed to make most long options appear
-   to be in a separate column.
-
-   For example, the following output (from ps):
-
-     -p PID, --pid=PID          List the process PID
-	 --pgrp=PGRP            List processes in the process group PGRP
-     -P, -x, --no-parent        Include processes without parents
-     -Q, --all-fields           Don't elide unusable fields (normally if there's
-				some reason ps can't print a field for any
-				process, it's removed from the output entirely)
-     -r, --reverse, --gratuitously-long-reverse-option
-				Reverse the order of any sort
-	 --session[=SID]        Add the processes from the session SID (which
-				defaults to the sid of the current process)
-
-    Here are some more options:
-     -f ZOT, --foonly=ZOT       Glork a foonly
-     -z, --zaza                 Snit a zar
-
-     -?, --help                 Give this help list
-	 --usage                Give a short usage message
-     -V, --version              Print program version
-
-   The struct argp_option array for the above could look like:
-
-   {
-     {"pid",       'p',      "PID",  0, "List the process PID"},
-     {"pgrp",      OPT_PGRP, "PGRP", 0, "List processes in the process group PGRP"},
-     {"no-parent", 'P',	      0,     0, "Include processes without parents"},
-     {0,           'x',       0,     OPTION_ALIAS},
-     {"all-fields",'Q',       0,     0, "Don't elide unusable fields (normally"
-                                        " if there's some reason ps can't"
-					" print a field for any process, it's"
-                                        " removed from the output entirely)" },
-     {"reverse",   'r',       0,     0, "Reverse the order of any sort"},
-     {"gratuitously-long-reverse-option", 0, 0, OPTION_ALIAS},
-     {"session",   OPT_SESS,  "SID", OPTION_ARG_OPTIONAL,
-                                        "Add the processes from the session"
-					" SID (which defaults to the sid of"
-					" the current process)" },
-
-     {0,0,0,0, "Here are some more options:"},
-     {"foonly", 'f', "ZOT", 0, "Glork a foonly"},
-     {"zaza", 'z', 0, 0, "Snit a zar"},
-
-     {0}
-   }
-
-   Note that the last three options are automatically supplied by argp_parse,
-   unless you tell it not to with ARGP_NO_HELP.
-
-*/
-
-/* Returns true if CH occurs between BEG and END.  */
-static int
-find_char (char ch, char *beg, char *end)
-{
-  while (beg < end)
-    if (*beg == ch)
-      return 1;
-    else
-      beg++;
-  return 0;
-}
-
-struct hol_cluster;		/* fwd decl */
-
-struct hol_entry
-{
-  /* First option.  */
-  const struct argp_option *opt;
-  /* Number of options (including aliases).  */
-  unsigned num;
-
-  /* A pointers into the HOL's short_options field, to the first short option
-     letter for this entry.  The order of the characters following this point
-     corresponds to the order of options pointed to by OPT, and there are at
-     most NUM.  A short option recorded in a option following OPT is only
-     valid if it occurs in the right place in SHORT_OPTIONS (otherwise it's
-     probably been shadowed by some other entry).  */
-  char *short_options;
-
-  /* Entries are sorted by their group first, in the order:
-       1, 2, ..., n, 0, -m, ..., -2, -1
-     and then alphabetically within each group.  The default is 0.  */
-  int group;
-
-  /* The cluster of options this entry belongs to, or 0 if none.  */
-  struct hol_cluster *cluster;
-
-  /* The argp from which this option came.  */
-  const struct argp *argp;
-};
-
-/* A cluster of entries to reflect the argp tree structure.  */
-struct hol_cluster
-{
-  /* A descriptive header printed before options in this cluster.  */
-  const char *header;
-
-  /* Used to order clusters within the same group with the same parent,
-     according to the order in which they occurred in the parent argp's child
-     list.  */
-  int index;
-
-  /* How to sort this cluster with respect to options and other clusters at the
-     same depth (clusters always follow options in the same group).  */
-  int group;
-
-  /* The cluster to which this cluster belongs, or 0 if it's at the base
-     level.  */
-  struct hol_cluster *parent;
-
-  /* The argp from which this cluster is (eventually) derived.  */
-  const struct argp *argp;
-
-  /* The distance this cluster is from the root.  */
-  int depth;
-
-  /* Clusters in a given hol are kept in a linked list, to make freeing them
-     possible.  */
-  struct hol_cluster *next;
-};
-
-/* A list of options for help.  */
-struct hol
-{
-  /* An array of hol_entry's.  */
-  struct hol_entry *entries;
-  /* The number of entries in this hol.  If this field is zero, the others
-     are undefined.  */
-  unsigned num_entries;
-
-  /* A string containing all short options in this HOL.  Each entry contains
-     pointers into this string, so the order can't be messed with blindly.  */
-  char *short_options;
-
-  /* Clusters of entries in this hol.  */
-  struct hol_cluster *clusters;
-};
-
-/* Create a struct hol from the options in ARGP.  CLUSTER is the
-   hol_cluster in which these entries occur, or 0, if at the root.  */
-static struct hol *
-make_hol (const struct argp *argp, struct hol_cluster *cluster)
-{
-  char *so;
-  const struct argp_option *o;
-  const struct argp_option *opts = argp->options;
-  struct hol_entry *entry;
-  unsigned num_short_options = 0;
-  struct hol *hol = malloc (sizeof (struct hol));
-
-  assert (hol);
-
-  hol->num_entries = 0;
-  hol->clusters = 0;
-
-  if (opts)
-    {
-      int cur_group = 0;
-
-      /* The first option must not be an alias.  */
-      assert (! oalias (opts));
-
-      /* Calculate the space needed.  */
-      for (o = opts; ! oend (o); o++)
-	{
-	  if (! oalias (o))
-	    hol->num_entries++;
-	  if (oshort (o))
-	    num_short_options++;	/* This is an upper bound.  */
-	}
-
-      hol->entries = malloc (sizeof (struct hol_entry) * hol->num_entries);
-      hol->short_options = malloc (num_short_options + 1);
-
-      assert (hol->entries && hol->short_options);
-
-      /* Fill in the entries.  */
-      so = hol->short_options;
-      for (o = opts, entry = hol->entries; ! oend (o); entry++)
-	{
-	  entry->opt = o;
-	  entry->num = 0;
-	  entry->short_options = so;
-	  entry->group = cur_group =
-	    o->group
-	    ? o->group
-	    : ((!o->name && !o->key)
-	       ? cur_group + 1
-	       : cur_group);
-	  entry->cluster = cluster;
-	  entry->argp = argp;
-
-	  do
-	    {
-	      entry->num++;
-	      if (oshort (o) && ! find_char (o->key, hol->short_options, so))
-		/* O has a valid short option which hasn't already been used.*/
-		*so++ = o->key;
-	      o++;
-	    }
-	  while (! oend (o) && oalias (o));
-	}
-      *so = '\0';		/* null terminated so we can find the length */
-    }
-
-  return hol;
-}
-
-/* Add a new cluster to HOL, with the given GROUP and HEADER (taken from the
-   associated argp child list entry), INDEX, and PARENT, and return a pointer
-   to it.  ARGP is the argp that this cluster results from.  */
-static struct hol_cluster *
-hol_add_cluster (struct hol *hol, int group, const char *header, int index,
-		 struct hol_cluster *parent, const struct argp *argp)
-{
-  struct hol_cluster *cl = malloc (sizeof (struct hol_cluster));
-  if (cl)
-    {
-      cl->group = group;
-      cl->header = header;
-
-      cl->index = index;
-      cl->parent = parent;
-      cl->argp = argp;
-      cl->depth = parent ? parent->depth + 1 : 0;
-
-      cl->next = hol->clusters;
-      hol->clusters = cl;
-    }
-  return cl;
-}
-
-/* Free HOL and any resources it uses.  */
-static void
-hol_free (struct hol *hol)
-{
-  struct hol_cluster *cl = hol->clusters;
-
-  while (cl)
-    {
-      struct hol_cluster *next = cl->next;
-      free (cl);
-      cl = next;
-    }
-
-  if (hol->num_entries > 0)
-    {
-      free (hol->entries);
-      free (hol->short_options);
-    }
-
-  free (hol);
-}
-
-static inline int
-hol_entry_short_iterate (const struct hol_entry *entry,
-			 int (*func)(const struct argp_option *opt,
-				     const struct argp_option *real,
-				     const char *domain, void *cookie),
-			 const char *domain, void *cookie)
-{
-  unsigned nopts;
-  int val = 0;
-  const struct argp_option *opt, *real = entry->opt;
-  char *so = entry->short_options;
-
-  for (opt = real, nopts = entry->num; nopts > 0 && !val; opt++, nopts--)
-    if (oshort (opt) && *so == opt->key)
-      {
-	if (!oalias (opt))
-	  real = opt;
-	if (ovisible (opt))
-	  val = (*func)(opt, real, domain, cookie);
-	so++;
-      }
-
-  return val;
-}
-
-static inline int
-hol_entry_long_iterate (const struct hol_entry *entry,
-			int (*func)(const struct argp_option *opt,
-				    const struct argp_option *real,
-				    const char *domain, void *cookie),
-			const char *domain, void *cookie)
-{
-  unsigned nopts;
-  int val = 0;
-  const struct argp_option *opt, *real = entry->opt;
-
-  for (opt = real, nopts = entry->num; nopts > 0 && !val; opt++, nopts--)
-    if (opt->name)
-      {
-	if (!oalias (opt))
-	  real = opt;
-	if (ovisible (opt))
-	  val = (*func)(opt, real, domain, cookie);
-      }
-
-  return val;
-}
-
-/* Iterator that returns true for the first short option.  */
-static inline int
-until_short (const struct argp_option *opt, const struct argp_option *real,
-	     const char *domain, void *cookie)
-{
-  return oshort (opt) ? opt->key : 0;
-}
-
-/* Returns the first valid short option in ENTRY, or 0 if there is none.  */
-static char
-hol_entry_first_short (const struct hol_entry *entry)
-{
-  return hol_entry_short_iterate (entry, until_short,
-				  entry->argp->argp_domain, 0);
-}
-
-/* Returns the first valid long option in ENTRY, or 0 if there is none.  */
-static const char *
-hol_entry_first_long (const struct hol_entry *entry)
-{
-  const struct argp_option *opt;
-  unsigned num;
-  for (opt = entry->opt, num = entry->num; num > 0; opt++, num--)
-    if (opt->name && ovisible (opt))
-      return opt->name;
-  return 0;
-}
-
-/* Returns the entry in HOL with the long option name NAME, or 0 if there is
-   none.  */
-static struct hol_entry *
-hol_find_entry (struct hol *hol, const char *name)
-{
-  struct hol_entry *entry = hol->entries;
-  unsigned num_entries = hol->num_entries;
-
-  while (num_entries-- > 0)
-    {
-      const struct argp_option *opt = entry->opt;
-      unsigned num_opts = entry->num;
-
-      while (num_opts-- > 0)
-	if (opt->name && ovisible (opt) && strcmp (opt->name, name) == 0)
-	  return entry;
-	else
-	  opt++;
-
-      entry++;
-    }
-
-  return 0;
-}
-
-/* If an entry with the long option NAME occurs in HOL, set it's special
-   sort position to GROUP.  */
-static void
-hol_set_group (struct hol *hol, const char *name, int group)
-{
-  struct hol_entry *entry = hol_find_entry (hol, name);
-  if (entry)
-    entry->group = group;
-}
-
-/* Order by group:  0, 1, 2, ..., n, -m, ..., -2, -1.
-   EQ is what to return if GROUP1 and GROUP2 are the same.  */
-static int
-group_cmp (int group1, int group2, int eq)
-{
-  if (group1 == group2)
-    return eq;
-  else if ((group1 < 0 && group2 < 0) || (group1 >= 0 && group2 >= 0))
-    return group1 - group2;
-  else
-    return group2 - group1;
-}
-
-/* Compare clusters CL1 & CL2 by the order that they should appear in
-   output.  */
-static int
-hol_cluster_cmp (const struct hol_cluster *cl1, const struct hol_cluster *cl2)
-{
-  /* If one cluster is deeper than the other, use its ancestor at the same
-     level, so that finding the common ancestor is straightforward.  */
-  while (cl1->depth < cl2->depth)
-    cl1 = cl1->parent;
-  while (cl2->depth < cl1->depth)
-    cl2 = cl2->parent;
-
-  /* Now reduce both clusters to their ancestors at the point where both have
-     a common parent; these can be directly compared.  */
-  while (cl1->parent != cl2->parent)
-    cl1 = cl1->parent, cl2 = cl2->parent;
-
-  return group_cmp (cl1->group, cl2->group, cl2->index - cl1->index);
-}
-
-/* Return the ancestor of CL that's just below the root (i.e., has a parent
-   of 0).  */
-static struct hol_cluster *
-hol_cluster_base (struct hol_cluster *cl)
-{
-  while (cl->parent)
-    cl = cl->parent;
-  return cl;
-}
-
-/* Return true if CL1 is a child of CL2.  */
-static int
-hol_cluster_is_child (const struct hol_cluster *cl1,
-		      const struct hol_cluster *cl2)
-{
-  while (cl1 && cl1 != cl2)
-    cl1 = cl1->parent;
-  return cl1 == cl2;
-}
-
-/* Given the name of a OPTION_DOC option, modifies NAME to start at the tail
-   that should be used for comparisons, and returns true iff it should be
-   treated as a non-option.  */
-static int
-canon_doc_option (const char **name)
-{
-  int non_opt;
-  /* Skip initial whitespace.  */
-  while (isspace (**name))
-    (*name)++;
-  /* Decide whether this looks like an option (leading `-') or not.  */
-  non_opt = (**name != '-');
-  /* Skip until part of name used for sorting.  */
-  while (**name && !isalnum (**name))
-    (*name)++;
-  return non_opt;
-}
-
-/* Order ENTRY1 & ENTRY2 by the order which they should appear in a help
-   listing.  */
-static int
-hol_entry_cmp (const struct hol_entry *entry1,
-	       const struct hol_entry *entry2)
-{
-  /* The group numbers by which the entries should be ordered; if either is
-     in a cluster, then this is just the group within the cluster.  */
-  int group1 = entry1->group, group2 = entry2->group;
-
-  if (entry1->cluster != entry2->cluster)
-    {
-      /* The entries are not within the same cluster, so we can't compare them
-	 directly, we have to use the appropiate clustering level too.  */
-      if (! entry1->cluster)
-	/* ENTRY1 is at the `base level', not in a cluster, so we have to
-	   compare it's group number with that of the base cluster in which
-	   ENTRY2 resides.  Note that if they're in the same group, the
-	   clustered option always comes laster.  */
-	return group_cmp (group1, hol_cluster_base (entry2->cluster)->group, -1);
-      else if (! entry2->cluster)
-	/* Likewise, but ENTRY2's not in a cluster.  */
-	return group_cmp (hol_cluster_base (entry1->cluster)->group, group2, 1);
-      else
-	/* Both entries are in clusters, we can just compare the clusters.  */
-	return hol_cluster_cmp (entry1->cluster, entry2->cluster);
-    }
-  else if (group1 == group2)
-    /* The entries are both in the same cluster and group, so compare them
-       alphabetically.  */
-    {
-      int short1 = hol_entry_first_short (entry1);
-      int short2 = hol_entry_first_short (entry2);
-      int doc1 = odoc (entry1->opt);
-      int doc2 = odoc (entry2->opt);
-      const char *long1 = hol_entry_first_long (entry1);
-      const char *long2 = hol_entry_first_long (entry2);
-
-      if (doc1)
-	doc1 = canon_doc_option (&long1);
-      if (doc2)
-	doc2 = canon_doc_option (&long2);
-
-      if (doc1 != doc2)
-	/* `documentation' options always follow normal options (or
-	   documentation options that *look* like normal options).  */
-	return doc1 - doc2;
-      else if (!short1 && !short2 && long1 && long2)
-	/* Only long options.  */
-	return __strcasecmp (long1, long2);
-      else
-	/* Compare short/short, long/short, short/long, using the first
-	   character of long options.  Entries without *any* valid
-	   options (such as options with OPTION_HIDDEN set) will be put
-	   first, but as they're not displayed, it doesn't matter where
-	   they are.  */
-	{
-	  char first1 = short1 ? short1 : long1 ? *long1 : 0;
-	  char first2 = short2 ? short2 : long2 ? *long2 : 0;
-#ifdef _tolower
-	  int lower_cmp = _tolower (first1) - _tolower (first2);
-#else
-	  int lower_cmp = tolower (first1) - tolower (first2);
-#endif
-	  /* Compare ignoring case, except when the options are both the
-	     same letter, in which case lower-case always comes first.  */
-	  return lower_cmp ? lower_cmp : first2 - first1;
-	}
-    }
-  else
-    /* Within the same cluster, but not the same group, so just compare
-       groups.  */
-    return group_cmp (group1, group2, 0);
-}
-
-/* Version of hol_entry_cmp with correct signature for qsort.  */
-static int
-hol_entry_qcmp (const void *entry1_v, const void *entry2_v)
-{
-  return hol_entry_cmp (entry1_v, entry2_v);
-}
-
-/* Sort HOL by group and alphabetically by option name (with short options
-   taking precedence over long).  Since the sorting is for display purposes
-   only, the shadowing of options isn't effected.  */
-static void
-hol_sort (struct hol *hol)
-{
-  if (hol->num_entries > 0)
-    qsort (hol->entries, hol->num_entries, sizeof (struct hol_entry),
-	   hol_entry_qcmp);
-}
-
-/* Append MORE to HOL, destroying MORE in the process.  Options in HOL shadow
-   any in MORE with the same name.  */
-static void
-hol_append (struct hol *hol, struct hol *more)
-{
-  struct hol_cluster **cl_end = &hol->clusters;
-  char *tmp;
-
-  /* Steal MORE's cluster list, and add it to the end of HOL's.  */
-  while (*cl_end)
-    cl_end = &(*cl_end)->next;
-  *cl_end = more->clusters;
-  more->clusters = 0;
-
-  /* Merge entries.  */
-  if (more->num_entries > 0)
-    {
-      if (hol->num_entries == 0)
-	{
-	  hol->num_entries = more->num_entries;
-	  hol->entries = more->entries;
-	  hol->short_options = more->short_options;
-	  more->num_entries = 0;	/* Mark MORE's fields as invalid.  */
-	}
-      else
-	/* Append the entries in MORE to those in HOL, taking care to only add
-	   non-shadowed SHORT_OPTIONS values.  */
-	{
-	  unsigned left;
-	  char *so, *more_so;
-	  struct hol_entry *e;
-	  unsigned num_entries = hol->num_entries + more->num_entries;
-	  struct hol_entry *entries =
-	    malloc (num_entries * sizeof (struct hol_entry));
-	  unsigned hol_so_len = strlen (hol->short_options);
-	  char *short_options =
-	    malloc (hol_so_len + strlen (more->short_options) + 1);
-
-          tmp = memcpy (entries, hol->entries,
-                        hol->num_entries * sizeof (struct hol_entry));
-          tmp += hol->num_entries * sizeof (struct hol_entry);
-	  memcpy (tmp,
-                  more->entries,
-                  more->num_entries * sizeof (struct hol_entry));
-
-	  memcpy (short_options, hol->short_options, hol_so_len);
-
-	  /* Fix up the short options pointers from HOL.  */
-	  for (e = entries, left = hol->num_entries; left > 0; e++, left--)
-	    e->short_options += (short_options - hol->short_options);
-
-	  /* Now add the short options from MORE, fixing up its entries
-	     too.  */
-	  so = short_options + hol_so_len;
-	  more_so = more->short_options;
-	  for (left = more->num_entries; left > 0; e++, left--)
-	    {
-	      int opts_left;
-	      const struct argp_option *opt;
-
-	      e->short_options = so;
-
-	      for (opts_left = e->num, opt = e->opt; opts_left; opt++, opts_left--)
-		{
-		  int ch = *more_so;
-		  if (oshort (opt) && ch == opt->key)
-		    /* The next short option in MORE_SO, CH, is from OPT.  */
-		    {
-		      if (! find_char (ch, short_options,
-				       short_options + hol_so_len))
-			/* The short option CH isn't shadowed by HOL's options,
-			   so add it to the sum.  */
-			*so++ = ch;
-		      more_so++;
-		    }
-		}
-	    }
-
-	  *so = '\0';
-
-	  free (hol->entries);
-	  free (hol->short_options);
-
-	  hol->entries = entries;
-	  hol->num_entries = num_entries;
-	  hol->short_options = short_options;
-	}
-    }
-
-  hol_free (more);
-}
-
-/* Inserts enough spaces to make sure STREAM is at column COL.  */
-static void
-indent_to (argp_fmtstream_t stream, unsigned col)
-{
-  int needed = col - __argp_fmtstream_point (stream);
-  while (needed-- > 0)
-    __argp_fmtstream_putc (stream, ' ');
-}
-
-/* Output to STREAM either a space, or a newline if there isn't room for at
-   least ENSURE characters before the right margin.  */
-static void
-space (argp_fmtstream_t stream, size_t ensure)
-{
-  if (__argp_fmtstream_point (stream) + ensure
-      >= __argp_fmtstream_rmargin (stream))
-    __argp_fmtstream_putc (stream, '\n');
-  else
-    __argp_fmtstream_putc (stream, ' ');
-}
-
-/* If the option REAL has an argument, we print it in using the printf
-   format REQ_FMT or OPT_FMT depending on whether it's a required or
-   optional argument.  */
-static void
-arg (const struct argp_option *real, const char *req_fmt, const char *opt_fmt,
-     const char *domain, argp_fmtstream_t stream)
-{
-  if (real->arg)
-    {
-      if (real->flags & OPTION_ARG_OPTIONAL)
-	__argp_fmtstream_printf (stream, opt_fmt,
-				 dgettext (domain, real->arg));
-      else
-	__argp_fmtstream_printf (stream, req_fmt,
-				 dgettext (domain, real->arg));
-    }
-}
-
-/* Helper functions for hol_entry_help.  */
-
-/* State used during the execution of hol_help.  */
-struct hol_help_state
-{
-  /* PREV_ENTRY should contain the previous entry printed, or 0.  */
-  struct hol_entry *prev_entry;
-
-  /* If an entry is in a different group from the previous one, and SEP_GROUPS
-     is true, then a blank line will be printed before any output. */
-  int sep_groups;
-
-  /* True if a duplicate option argument was suppressed (only ever set if
-     UPARAMS.dup_args is false).  */
-  int suppressed_dup_arg;
-};
-
-/* Some state used while printing a help entry (used to communicate with
-   helper functions).  See the doc for hol_entry_help for more info, as most
-   of the fields are copied from its arguments.  */
-struct pentry_state
-{
-  const struct hol_entry *entry;
-  argp_fmtstream_t stream;
-  struct hol_help_state *hhstate;
-
-  /* True if nothing's been printed so far.  */
-  int first;
-
-  /* If non-zero, the state that was used to print this help.  */
-  const struct argp_state *state;
-};
-
-/* If a user doc filter should be applied to DOC, do so.  */
-static const char *
-filter_doc (const char *doc, int key, const struct argp *argp,
-	    const struct argp_state *state)
-{
-  if (argp->help_filter)
-    /* We must apply a user filter to this output.  */
-    {
-      void *input = __argp_input (argp, state);
-      return (*argp->help_filter) (key, doc, input);
-    }
-  else
-    /* No filter.  */
-    return doc;
-}
-
-/* Prints STR as a header line, with the margin lines set appropiately, and
-   notes the fact that groups should be separated with a blank line.  ARGP is
-   the argp that should dictate any user doc filtering to take place.  Note
-   that the previous wrap margin isn't restored, but the left margin is reset
-   to 0.  */
-static void
-print_header (const char *str, const struct argp *argp,
-	      struct pentry_state *pest)
-{
-  const char *tstr = dgettext (argp->argp_domain, str);
-  const char *fstr = filter_doc (tstr, ARGP_KEY_HELP_HEADER, argp, pest->state);
-
-  if (fstr)
-    {
-      if (*fstr)
-	{
-	  if (pest->hhstate->prev_entry)
-	    /* Precede with a blank line.  */
-	    __argp_fmtstream_putc (pest->stream, '\n');
-	  indent_to (pest->stream, uparams.header_col);
-	  __argp_fmtstream_set_lmargin (pest->stream, uparams.header_col);
-	  __argp_fmtstream_set_wmargin (pest->stream, uparams.header_col);
-	  __argp_fmtstream_puts (pest->stream, fstr);
-	  __argp_fmtstream_set_lmargin (pest->stream, 0);
-	  __argp_fmtstream_putc (pest->stream, '\n');
-	}
-
-      pest->hhstate->sep_groups = 1; /* Separate subsequent groups. */
-    }
-
-  if (fstr != tstr)
-    free ((char *) fstr);
-}
-
-/* Inserts a comma if this isn't the first item on the line, and then makes
-   sure we're at least to column COL.  If this *is* the first item on a line,
-   prints any pending whitespace/headers that should precede this line. Also
-   clears FIRST.  */
-static void
-comma (unsigned col, struct pentry_state *pest)
-{
-  if (pest->first)
-    {
-      const struct hol_entry *pe = pest->hhstate->prev_entry;
-      const struct hol_cluster *cl = pest->entry->cluster;
-
-      if (pest->hhstate->sep_groups && pe && pest->entry->group != pe->group)
-	__argp_fmtstream_putc (pest->stream, '\n');
-
-      if (cl && cl->header && *cl->header
-	  && (!pe
-	      || (pe->cluster != cl
-		  && !hol_cluster_is_child (pe->cluster, cl))))
-	/* If we're changing clusters, then this must be the start of the
-	   ENTRY's cluster unless that is an ancestor of the previous one
-	   (in which case we had just popped into a sub-cluster for a bit).
-	   If so, then print the cluster's header line.  */
-	{
-	  int old_wm = __argp_fmtstream_wmargin (pest->stream);
-	  print_header (cl->header, cl->argp, pest);
-	  __argp_fmtstream_set_wmargin (pest->stream, old_wm);
-	}
-
-      pest->first = 0;
-    }
-  else
-    __argp_fmtstream_puts (pest->stream, ", ");
-
-  indent_to (pest->stream, col);
-}
-
-/* Print help for ENTRY to STREAM.  */
-static void
-hol_entry_help (struct hol_entry *entry, const struct argp_state *state,
-		argp_fmtstream_t stream, struct hol_help_state *hhstate)
-{
-  unsigned num;
-  const struct argp_option *real = entry->opt, *opt;
-  char *so = entry->short_options;
-  int have_long_opt = 0;	/* We have any long options.  */
-  /* Saved margins.  */
-  int old_lm = __argp_fmtstream_set_lmargin (stream, 0);
-  int old_wm = __argp_fmtstream_wmargin (stream);
-  /* PEST is a state block holding some of our variables that we'd like to
-     share with helper functions.  */
-  struct pentry_state pest = { entry, stream, hhstate, 1, state };
-
-  if (! odoc (real))
-    for (opt = real, num = entry->num; num > 0; opt++, num--)
-      if (opt->name && ovisible (opt))
-	{
-	  have_long_opt = 1;
-	  break;
-	}
-
-  /* First emit short options.  */
-  __argp_fmtstream_set_wmargin (stream, uparams.short_opt_col); /* For truly bizarre cases. */
-  for (opt = real, num = entry->num; num > 0; opt++, num--)
-    if (oshort (opt) && opt->key == *so)
-      /* OPT has a valid (non shadowed) short option.  */
-      {
-	if (ovisible (opt))
-	  {
-	    comma (uparams.short_opt_col, &pest);
-	    __argp_fmtstream_putc (stream, '-');
-	    __argp_fmtstream_putc (stream, *so);
-	    if (!have_long_opt || uparams.dup_args)
-	      arg (real, " %s", "[%s]", state->root_argp->argp_domain, stream);
-	    else if (real->arg)
-	      hhstate->suppressed_dup_arg = 1;
-	  }
-	so++;
-      }
-
-  /* Now, long options.  */
-  if (odoc (real))
-    /* A `documentation' option.  */
-    {
-      __argp_fmtstream_set_wmargin (stream, uparams.doc_opt_col);
-      for (opt = real, num = entry->num; num > 0; opt++, num--)
-	if (opt->name && ovisible (opt))
-	  {
-	    comma (uparams.doc_opt_col, &pest);
-	    /* Calling gettext here isn't quite right, since sorting will
-	       have been done on the original; but documentation options
-	       should be pretty rare anyway...  */
-	    __argp_fmtstream_puts (stream,
-				   dgettext (state->root_argp->argp_domain,
-					     opt->name));
-	  }
-    }
-  else
-    /* A real long option.  */
-    {
-      int first_long_opt = 1;
-
-      __argp_fmtstream_set_wmargin (stream, uparams.long_opt_col);
-      for (opt = real, num = entry->num; num > 0; opt++, num--)
-	if (opt->name && ovisible (opt))
-	  {
-	    comma (uparams.long_opt_col, &pest);
-	    __argp_fmtstream_printf (stream, "--%s", opt->name);
-	    if (first_long_opt || uparams.dup_args)
-	      arg (real, "=%s", "[=%s]", state->root_argp->argp_domain,
-		   stream);
-	    else if (real->arg)
-	      hhstate->suppressed_dup_arg = 1;
-	  }
-    }
-
-  /* Next, documentation strings.  */
-  __argp_fmtstream_set_lmargin (stream, 0);
-
-  if (pest.first)
-    {
-      /* Didn't print any switches, what's up?  */
-      if (!oshort (real) && !real->name)
-	/* This is a group header, print it nicely.  */
-	print_header (real->doc, entry->argp, &pest);
-      else
-	/* Just a totally shadowed option or null header; print nothing.  */
-	goto cleanup;		/* Just return, after cleaning up.  */
-    }
-  else
-    {
-      const char *tstr = real->doc ? dgettext (state->root_argp->argp_domain,
-					       real->doc) : 0;
-      const char *fstr = filter_doc (tstr, real->key, entry->argp, state);
-      if (fstr && *fstr)
-	{
-	  unsigned int col = __argp_fmtstream_point (stream);
-
-	  __argp_fmtstream_set_lmargin (stream, uparams.opt_doc_col);
-	  __argp_fmtstream_set_wmargin (stream, uparams.opt_doc_col);
-
-	  if (col > (unsigned int) (uparams.opt_doc_col + 3))
-	    __argp_fmtstream_putc (stream, '\n');
-	  else if (col >= (unsigned int) uparams.opt_doc_col)
-	    __argp_fmtstream_puts (stream, "   ");
-	  else
-	    indent_to (stream, uparams.opt_doc_col);
-
-	  __argp_fmtstream_puts (stream, fstr);
-	}
-      if (fstr && fstr != tstr)
-	free ((char *) fstr);
-
-      /* Reset the left margin.  */
-      __argp_fmtstream_set_lmargin (stream, 0);
-      __argp_fmtstream_putc (stream, '\n');
-    }
-
-  hhstate->prev_entry = entry;
-
-cleanup:
-  __argp_fmtstream_set_lmargin (stream, old_lm);
-  __argp_fmtstream_set_wmargin (stream, old_wm);
-}
-
-/* Output a long help message about the options in HOL to STREAM.  */
-static void
-hol_help (struct hol *hol, const struct argp_state *state,
-	  argp_fmtstream_t stream)
-{
-  unsigned num;
-  struct hol_entry *entry;
-  struct hol_help_state hhstate = { 0, 0, 0 };
-
-  for (entry = hol->entries, num = hol->num_entries; num > 0; entry++, num--)
-    hol_entry_help (entry, state, stream, &hhstate);
-
-  if (hhstate.suppressed_dup_arg && uparams.dup_args_note)
-    {
-      const char *tstr = dgettext (state->root_argp->argp_domain, "\
-Mandatory or optional arguments to long options are also mandatory or \
-optional for any corresponding short options.");
-      const char *fstr = filter_doc (tstr, ARGP_KEY_HELP_DUP_ARGS_NOTE,
-				     state ? state->root_argp : 0, state);
-      if (fstr && *fstr)
-	{
-	  __argp_fmtstream_putc (stream, '\n');
-	  __argp_fmtstream_puts (stream, fstr);
-	  __argp_fmtstream_putc (stream, '\n');
-	}
-      if (fstr && fstr != tstr)
-	free ((char *) fstr);
-    }
-}
-
-/* Helper functions for hol_usage.  */
-
-/* If OPT is a short option without an arg, append its key to the string
-   pointer pointer to by COOKIE, and advance the pointer.  */
-static int
-add_argless_short_opt (const struct argp_option *opt,
-		       const struct argp_option *real,
-		       const char *domain, void *cookie)
-{
-  char **snao_end = cookie;
-  if (!(opt->arg || real->arg)
-      && !((opt->flags | real->flags) & OPTION_NO_USAGE))
-    *(*snao_end)++ = opt->key;
-  return 0;
-}
-
-/* If OPT is a short option with an arg, output a usage entry for it to the
-   stream pointed at by COOKIE.  */
-static int
-usage_argful_short_opt (const struct argp_option *opt,
-			const struct argp_option *real,
-			const char *domain, void *cookie)
-{
-  argp_fmtstream_t stream = cookie;
-  const char *arg = opt->arg;
-  int flags = opt->flags | real->flags;
-
-  if (! arg)
-    arg = real->arg;
-
-  if (arg && !(flags & OPTION_NO_USAGE))
-    {
-      arg = dgettext (domain, arg);
-
-      if (flags & OPTION_ARG_OPTIONAL)
-	__argp_fmtstream_printf (stream, " [-%c[%s]]", opt->key, arg);
-      else
-	{
-	  /* Manually do line wrapping so that it (probably) won't
-	     get wrapped at the embedded space.  */
-	  space (stream, 6 + strlen (arg));
-	  __argp_fmtstream_printf (stream, "[-%c %s]", opt->key, arg);
-	}
-    }
-
-  return 0;
-}
-
-/* Output a usage entry for the long option opt to the stream pointed at by
-   COOKIE.  */
-static int
-usage_long_opt (const struct argp_option *opt,
-		const struct argp_option *real,
-		const char *domain, void *cookie)
-{
-  argp_fmtstream_t stream = cookie;
-  const char *arg = opt->arg;
-  int flags = opt->flags | real->flags;
-
-  if (! arg)
-    arg = real->arg;
-
-  if (! (flags & OPTION_NO_USAGE))
-    {
-      if (arg)
-	{
-	  arg = dgettext (domain, arg);
-	  if (flags & OPTION_ARG_OPTIONAL)
-	    __argp_fmtstream_printf (stream, " [--%s[=%s]]", opt->name, arg);
-	  else
-	    __argp_fmtstream_printf (stream, " [--%s=%s]", opt->name, arg);
-	}
-      else
-	__argp_fmtstream_printf (stream, " [--%s]", opt->name);
-    }
-
-  return 0;
-}
-
-/* Print a short usage description for the arguments in HOL to STREAM.  */
-static void
-hol_usage (struct hol *hol, argp_fmtstream_t stream)
-{
-  if (hol->num_entries > 0)
-    {
-      unsigned nentries;
-      struct hol_entry *entry;
-      char *short_no_arg_opts = alloca (strlen (hol->short_options) + 1);
-      char *snao_end = short_no_arg_opts;
-
-      /* First we put a list of short options without arguments.  */
-      for (entry = hol->entries, nentries = hol->num_entries
-	   ; nentries > 0
-	   ; entry++, nentries--)
-	hol_entry_short_iterate (entry, add_argless_short_opt,
-				 entry->argp->argp_domain, &snao_end);
-      if (snao_end > short_no_arg_opts)
-	{
-	  *snao_end++ = 0;
-	  __argp_fmtstream_printf (stream, " [-%s]", short_no_arg_opts);
-	}
-
-      /* Now a list of short options *with* arguments.  */
-      for (entry = hol->entries, nentries = hol->num_entries
-	   ; nentries > 0
-	   ; entry++, nentries--)
-	hol_entry_short_iterate (entry, usage_argful_short_opt,
-				 entry->argp->argp_domain, stream);
-
-      /* Finally, a list of long options (whew!).  */
-      for (entry = hol->entries, nentries = hol->num_entries
-	   ; nentries > 0
-	   ; entry++, nentries--)
-	hol_entry_long_iterate (entry, usage_long_opt,
-				entry->argp->argp_domain, stream);
-    }
-}
-
-/* Make a HOL containing all levels of options in ARGP.  CLUSTER is the
-   cluster in which ARGP's entries should be clustered, or 0.  */
-static struct hol *
-argp_hol (const struct argp *argp, struct hol_cluster *cluster)
-{
-  const struct argp_child *child = argp->children;
-  struct hol *hol = make_hol (argp, cluster);
-  if (child)
-    while (child->argp)
-      {
-	struct hol_cluster *child_cluster =
-	  ((child->group || child->header)
-	   /* Put CHILD->argp within its own cluster.  */
-	   ? hol_add_cluster (hol, child->group, child->header,
-			      child - argp->children, cluster, argp)
-	   /* Just merge it into the parent's cluster.  */
-	   : cluster);
-	hol_append (hol, argp_hol (child->argp, child_cluster)) ;
-	child++;
-      }
-  return hol;
-}
-
-/* Calculate how many different levels with alternative args strings exist in
-   ARGP.  */
-static size_t
-argp_args_levels (const struct argp *argp)
-{
-  size_t levels = 0;
-  const struct argp_child *child = argp->children;
-
-  if (argp->args_doc && strchr (argp->args_doc, '\n'))
-    levels++;
-
-  if (child)
-    while (child->argp)
-      levels += argp_args_levels ((child++)->argp);
-
-  return levels;
-}
-
-/* Print all the non-option args documented in ARGP to STREAM.  Any output is
-   preceded by a space.  LEVELS is a pointer to a byte vector the length
-   returned by argp_args_levels; it should be initialized to zero, and
-   updated by this routine for the next call if ADVANCE is true.  True is
-   returned as long as there are more patterns to output.  */
-static int
-argp_args_usage (const struct argp *argp, const struct argp_state *state,
-		 char **levels, int advance, argp_fmtstream_t stream)
-{
-  char *our_level = *levels;
-  int multiple = 0;
-  const struct argp_child *child = argp->children;
-  const char *tdoc = dgettext (argp->argp_domain, argp->args_doc), *nl = 0;
-  const char *fdoc = filter_doc (tdoc, ARGP_KEY_HELP_ARGS_DOC, argp, state);
-
-  if (fdoc)
-    {
-      const char *cp = fdoc;
-      nl = strchr (cp, '\n');
-      if (!nl)
-        {
-          nl = cp;
-          while (*nl != '\0') nl++;
-        }
-
-      if (*nl != '\0')
-	/* This is a `multi-level' args doc; advance to the correct position
-	   as determined by our state in LEVELS, and update LEVELS.  */
-	{
-	  int i;
-	  multiple = 1;
-	  for (i = 0; i < *our_level; i++)
-            {
-              cp = nl + 1;
-              nl = strchr (cp, '\n');
-              if (!nl)
-                {
-                  nl = cp;
-                  while (*nl != '\0') nl++;
-                }
-            }
-	  (*levels)++;
-	}
-
-      /* Manually do line wrapping so that it (probably) won't get wrapped at
-	 any embedded spaces.  */
-      space (stream, 1 + nl - cp);
-
-      __argp_fmtstream_write (stream, cp, nl - cp);
-    }
-  if (fdoc && fdoc != tdoc)
-    free ((char *)fdoc);	/* Free user's modified doc string.  */
-
-  if (child)
-    while (child->argp)
-      advance = !argp_args_usage ((child++)->argp, state, levels, advance, stream);
-
-  if (advance && multiple)
-    {
-      /* Need to increment our level.  */
-      if (*nl)
-	/* There's more we can do here.  */
-	{
-	  (*our_level)++;
-	  advance = 0;		/* Our parent shouldn't advance also. */
-	}
-      else if (*our_level > 0)
-	/* We had multiple levels, but used them up; reset to zero.  */
-	*our_level = 0;
-    }
-
-  return !advance;
-}
-
-/* Print the documentation for ARGP to STREAM; if POST is false, then
-   everything preceeding a `\v' character in the documentation strings (or
-   the whole string, for those with none) is printed, otherwise, everything
-   following the `\v' character (nothing for strings without).  Each separate
-   bit of documentation is separated a blank line, and if PRE_BLANK is true,
-   then the first is as well.  If FIRST_ONLY is true, only the first
-   occurrence is output.  Returns true if anything was output.  */
-static int
-argp_doc (const struct argp *argp, const struct argp_state *state,
-	  int post, int pre_blank, int first_only,
-	  argp_fmtstream_t stream)
-{
-  const char *text;
-  const char *inp_text;
-  char *tmp_text;
-  void *input = 0;
-  int anything = 0;
-  size_t inp_text_limit = 0;
-  const char *doc = dgettext (argp->argp_domain, argp->doc);
-  const struct argp_child *child = argp->children;
-
-  if (doc)
-    {
-      char *vt = strchr (doc, '\v');
-      inp_text = post ? (vt ? vt + 1 : 0) : doc;
-      inp_text_limit = (!post && vt) ? (vt - doc) : 0;
-    }
-  else
-    inp_text = 0;
-
-  if (argp->help_filter)
-    /* We have to filter the doc strings.  */
-    {
-      if (inp_text_limit)
-        {
-          /* Copy INP_TEXT so that it's nul-terminated. */
-          tmp_text = _malloc_r (_REENT, inp_text_limit);
-          strncpy (tmp_text, inp_text, inp_text_limit);
-          _free_r (_REENT, inp_text);
-          inp_text = tmp_text;
-        }
-      input = __argp_input (argp, state);
-      text =
-	(*argp->help_filter) (post
-			      ? ARGP_KEY_HELP_POST_DOC
-			      : ARGP_KEY_HELP_PRE_DOC,
-			      inp_text, input);
-    }
-  else
-    text = (const char *) inp_text;
-
-  if (text)
-    {
-      if (pre_blank)
-	__argp_fmtstream_putc (stream, '\n');
-
-      if (text == inp_text && inp_text_limit)
-	__argp_fmtstream_write (stream, inp_text, inp_text_limit);
-      else
-	__argp_fmtstream_puts (stream, text);
-
-      if (__argp_fmtstream_point (stream) > __argp_fmtstream_lmargin (stream))
-	__argp_fmtstream_putc (stream, '\n');
-
-      anything = 1;
-    }
-
-  if (text && text != inp_text)
-    free ((char *) text);	/* Free TEXT returned from the help filter.  */
-  if (inp_text && inp_text_limit && argp->help_filter)
-    free ((char *) inp_text);	/* We copied INP_TEXT, so free it now.  */
-
-  if (post && argp->help_filter)
-    /* Now see if we have to output a ARGP_KEY_HELP_EXTRA text.  */
-    {
-      text = (*argp->help_filter) (ARGP_KEY_HELP_EXTRA, 0, input);
-      if (text)
-	{
-	  if (anything || pre_blank)
-	    __argp_fmtstream_putc (stream, '\n');
-	  __argp_fmtstream_puts (stream, text);
-	  free ((char *) text);
-	  if (__argp_fmtstream_point (stream)
-	      > __argp_fmtstream_lmargin (stream))
-	    __argp_fmtstream_putc (stream, '\n');
-	  anything = 1;
-	}
-    }
-
-  if (child)
-    while (child->argp && !(first_only && anything))
-      anything |=
-	argp_doc ((child++)->argp, state,
-		  post, anything || pre_blank, first_only,
-		  stream);
-
-  return anything;
-}
-
-/* Output a usage message for ARGP to STREAM.  If called from
-   argp_state_help, STATE is the relevent parsing state.  FLAGS are from the
-   set ARGP_HELP_*.  NAME is what to use wherever a `program name' is
-   needed. */
-static void
-_help (const struct argp *argp, const struct argp_state *state, FILE *stream,
-       unsigned flags, char *name)
-{
-  int anything = 0;		/* Whether we've output anything.  */
-  struct hol *hol = 0;
-  argp_fmtstream_t fs;
-
-  if (! stream)
-    return;
-
-  _flockfile (stream);
-
-  if (! uparams.valid)
-    fill_in_uparams (state);
-
-  fs = __argp_make_fmtstream (stream, 0, uparams.rmargin, 0);
-  if (! fs)
-    {
-      _funlockfile (stream);
-      return;
-    }
-
-  if (flags & (ARGP_HELP_USAGE | ARGP_HELP_SHORT_USAGE | ARGP_HELP_LONG))
-    {
-      hol = argp_hol (argp, 0);
-
-      /* If present, these options always come last.  */
-      hol_set_group (hol, "help", -1);
-      hol_set_group (hol, "version", -1);
-
-      hol_sort (hol);
-    }
-
-  if (flags & (ARGP_HELP_USAGE | ARGP_HELP_SHORT_USAGE))
-    /* Print a short `Usage:' message.  */
-    {
-      int first_pattern = 1, more_patterns;
-      size_t num_pattern_levels = argp_args_levels (argp);
-      char *pattern_levels = alloca (num_pattern_levels);
-
-      memset (pattern_levels, 0, num_pattern_levels);
-
-      do
-	{
-	  int old_lm;
-	  int old_wm = __argp_fmtstream_set_wmargin (fs, uparams.usage_indent);
-	  char *levels = pattern_levels;
-
-	  if (first_pattern)
-	    __argp_fmtstream_printf (fs, "%s %s",
-				     dgettext (argp->argp_domain, "Usage:"),
-				     name);
-	  else
-	    __argp_fmtstream_printf (fs, "%s %s",
-				     dgettext (argp->argp_domain, "  or: "),
-				     name);
-
-	  /* We set the lmargin as well as the wmargin, because hol_usage
-	     manually wraps options with newline to avoid annoying breaks.  */
-	  old_lm = __argp_fmtstream_set_lmargin (fs, uparams.usage_indent);
-
-	  if (flags & ARGP_HELP_SHORT_USAGE)
-	    /* Just show where the options go.  */
-	    {
-	      if (hol->num_entries > 0)
-		__argp_fmtstream_puts (fs, dgettext (argp->argp_domain,
-						     " [OPTION...]"));
-	    }
-	  else
-	    /* Actually print the options.  */
-	    {
-	      hol_usage (hol, fs);
-	      flags |= ARGP_HELP_SHORT_USAGE; /* But only do so once.  */
-	    }
-
-	  more_patterns = argp_args_usage (argp, state, &levels, 1, fs);
-
-	  __argp_fmtstream_set_wmargin (fs, old_wm);
-	  __argp_fmtstream_set_lmargin (fs, old_lm);
-
-	  __argp_fmtstream_putc (fs, '\n');
-	  anything = 1;
-
-	  first_pattern = 0;
-	}
-      while (more_patterns);
-    }
-
-  if (flags & ARGP_HELP_PRE_DOC)
-    anything |= argp_doc (argp, state, 0, 0, 1, fs);
-
-  if (flags & ARGP_HELP_SEE)
-    {
-      __argp_fmtstream_printf (fs, dgettext (argp->argp_domain, "\
-Try `%s --help' or `%s --usage' for more information.\n"),
-			       name, name);
-      anything = 1;
-    }
-
-  if (flags & ARGP_HELP_LONG)
-    /* Print a long, detailed help message.  */
-    {
-      /* Print info about all the options.  */
-      if (hol->num_entries > 0)
-	{
-	  if (anything)
-	    __argp_fmtstream_putc (fs, '\n');
-	  hol_help (hol, state, fs);
-	  anything = 1;
-	}
-    }
-
-  if (flags & ARGP_HELP_POST_DOC)
-    /* Print any documentation strings at the end.  */
-    anything |= argp_doc (argp, state, 1, anything, 0, fs);
-
-  if ((flags & ARGP_HELP_BUG_ADDR) && argp_program_bug_address)
-    {
-      if (anything)
-	__argp_fmtstream_putc (fs, '\n');
-      __argp_fmtstream_printf (fs, dgettext (argp->argp_domain,
-					     "Report bugs to %s.\n"),
- 			       argp_program_bug_address);
-      anything = 1;
-    }
-
-  _funlockfile (stream);
-
-  if (hol)
-    hol_free (hol);
-
-  __argp_fmtstream_free (fs);
-}
-
-/* Output a usage message for ARGP to STREAM.  FLAGS are from the set
-   ARGP_HELP_*.  NAME is what to use wherever a `program name' is needed. */
-void __argp_help (const struct argp *argp, FILE *stream,
-		  unsigned flags, char *name)
-{
-  _help (argp, 0, stream, flags, name);
-}
-#ifdef weak_alias
-weak_alias (__argp_help, argp_help)
-#endif
-
-/* Output, if appropriate, a usage message for STATE to STREAM.  FLAGS are
-   from the set ARGP_HELP_*.  */
-void
-__argp_state_help (const struct argp_state *state, FILE *stream, unsigned flags)
-{
-  if ((!state || ! (state->flags & ARGP_NO_ERRS)) && stream)
-    {
-      if (state && (state->flags & ARGP_LONG_ONLY))
-	flags |= ARGP_HELP_LONG_ONLY;
-
-      _help (state ? state->root_argp : 0, state, stream, flags,
-	     state ? state->name : program_invocation_short_name);
-
-      if (!state || ! (state->flags & ARGP_NO_EXIT))
-	{
-	  if (flags & ARGP_HELP_EXIT_ERR)
-	    exit (argp_err_exit_status);
-	  if (flags & ARGP_HELP_EXIT_OK)
-	    exit (0);
-	}
-  }
-}
-#ifdef weak_alias
-weak_alias (__argp_state_help, argp_state_help)
-#endif
-
-/* If appropriate, print the printf string FMT and following args, preceded
-   by the program name and `:', to stderr, and followed by a `Try ... --help'
-   message, then exit (1).  */
-void
-__argp_error (const struct argp_state *state, const char *fmt, ...)
-{
-  if (!state || !(state->flags & ARGP_NO_ERRS))
-    {
-      FILE *stream = state ? state->err_stream : stderr;
-
-      if (stream)
-	{
-	  va_list ap;
-
-	  _flockfile (stream);
-
-	  va_start (ap, fmt);
-
-#ifdef USE_IN_LIBIO
-	  if (_IO_fwide (stream, 0) > 0)
-	    {
-	      char *buf;
-
-	      __asprintf (&buf, fmt, ap);
-
-	      __fwprintf (stream, L"%s: %s\n",
-			  state ? state->name : program_invocation_short_name,
-			  buf);
-
-	      free (buf);
-	    }
-	  else
-#endif
-	    {
-	      fputs (state
-			      ? state->name : program_invocation_short_name,
-			      stream);
-	      putc_unlocked (':', stream);
-	      putc_unlocked (' ', stream);
-
-	      vfprintf (stream, fmt, ap);
-
-	      putc_unlocked ('\n', stream);
-	    }
-
-	  __argp_state_help (state, stream, ARGP_HELP_STD_ERR);
-
-	  va_end (ap);
-
-	  _funlockfile (stream);
-	}
-    }
-}
-#ifdef weak_alias
-weak_alias (__argp_error, argp_error)
-#endif
-
-/* Similar to the standard gnu error-reporting function error(), but will
-   respect the ARGP_NO_EXIT and ARGP_NO_ERRS flags in STATE, and will print
-   to STATE->err_stream.  This is useful for argument parsing code that is
-   shared between program startup (when exiting is desired) and runtime
-   option parsing (when typically an error code is returned instead).  The
-   difference between this function and argp_error is that the latter is for
-   *parsing errors*, and the former is for other problems that occur during
-   parsing but don't reflect a (syntactic) problem with the input.  */
-void
-__argp_failure (const struct argp_state *state, int status, int errnum,
-		const char *fmt, ...)
-{
-  if (!state || !(state->flags & ARGP_NO_ERRS))
-    {
-      FILE *stream = state ? state->err_stream : stderr;
-
-      if (stream)
-	{
-	  _flockfile (stream);
-
-#ifdef USE_IN_LIBIO
-	  if (_IO_fwide (stream, 0) > 0)
-	    __fwprintf (stream, L"%s",
-			state ? state->name : program_invocation_short_name);
-	  else
-#endif
-	    fputs (state
-			    ? state->name : program_invocation_short_name,
-			    stream);
-
-	  if (fmt)
-	    {
-	      va_list ap;
-
-	      va_start (ap, fmt);
-#ifdef USE_IN_LIBIO
-	      if (_IO_fwide (stream, 0) > 0)
-		{
-		  char *buf;
-
-		  __asprintf (&buf, fmt, ap);
-
-		  __fwprintf (stream, L": %s", buf);
-
-		  free (buf);
-		}
-	      else
-#endif
-		{
-		  putc_unlocked (':', stream);
-		  putc_unlocked (' ', stream);
-
-		  vfprintf (stream, fmt, ap);
-		}
-
-	      va_end (ap);
-	    }
-
-	  if (errnum)
-	    {
-	      char buf[200];
-
-#ifdef USE_IN_LIBIO
-	      if (_IO_fwide (stream, 0) > 0)
-		__fwprintf (stream, L": %s",
-			    strerror_r (errnum, buf, sizeof (buf)));
-	      else
-#endif
-		{
-		  putc_unlocked (':', stream);
-		  putc_unlocked (' ', stream);
-		  fputs (strerror_r (errnum, buf, sizeof (buf)), stream);
-		}
-	    }
-
-#ifdef USE_IN_LIBIO
-	  if (_IO_fwide (stream, 0) > 0)
-	    putwc_unlocked (L'\n', stream);
-	  else
-#endif
-	    putc_unlocked ('\n', stream);
-
-	  _funlockfile (stream);
-
-	  if (status && (!state || !(state->flags & ARGP_NO_EXIT)))
-	    exit (status);
-	}
-    }
-}
-#ifdef weak_alias
-weak_alias (__argp_failure, argp_failure)
-#endif
diff --git a/newlib/libc/sys/linux/argp/argp-namefrob.h b/newlib/libc/sys/linux/argp/argp-namefrob.h
deleted file mode 100644
index 668f35d0d..000000000
--- a/newlib/libc/sys/linux/argp/argp-namefrob.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* Name frobnication for compiling argp outside of glibc
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#if !_LIBC
-/* This code is written for inclusion in gnu-libc, and uses names in the
-   namespace reserved for libc.  If we're not compiling in libc, define those
-   names to be the normal ones instead.  */
-
-/* argp-parse functions */
-#undef __argp_parse
-#define __argp_parse argp_parse
-#undef __option_is_end
-#define __option_is_end _option_is_end
-#undef __option_is_short
-#define __option_is_short _option_is_short
-#undef __argp_input
-#define __argp_input _argp_input
-
-/* argp-help functions */
-#undef __argp_help
-#define __argp_help argp_help
-#undef __argp_error
-#define __argp_error argp_error
-#undef __argp_failure
-#define __argp_failure argp_failure
-#undef __argp_state_help
-#define __argp_state_help argp_state_help
-#undef __argp_usage
-#define __argp_usage argp_usage
-
-/* argp-fmtstream functions */
-#undef __argp_make_fmtstream
-#define __argp_make_fmtstream argp_make_fmtstream
-#undef __argp_fmtstream_free
-#define __argp_fmtstream_free argp_fmtstream_free
-#undef __argp_fmtstream_putc
-#define __argp_fmtstream_putc argp_fmtstream_putc
-#undef __argp_fmtstream_puts
-#define __argp_fmtstream_puts argp_fmtstream_puts
-#undef __argp_fmtstream_write
-#define __argp_fmtstream_write argp_fmtstream_write
-#undef __argp_fmtstream_printf
-#define __argp_fmtstream_printf argp_fmtstream_printf
-#undef __argp_fmtstream_set_lmargin
-#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
-#undef __argp_fmtstream_set_rmargin
-#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
-#undef __argp_fmtstream_set_wmargin
-#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
-#undef __argp_fmtstream_point
-#define __argp_fmtstream_point argp_fmtstream_point
-#undef __argp_fmtstream_update
-#define __argp_fmtstream_update _argp_fmtstream_update
-#undef __argp_fmtstream_ensure
-#define __argp_fmtstream_ensure _argp_fmtstream_ensure
-#undef __argp_fmtstream_lmargin
-#define __argp_fmtstream_lmargin argp_fmtstream_lmargin
-#undef __argp_fmtstream_rmargin
-#define __argp_fmtstream_rmargin argp_fmtstream_rmargin
-#undef __argp_fmtstream_wmargin
-#define __argp_fmtstream_wmargin argp_fmtstream_wmargin
-
-/* normal libc functions we call */
-#undef __sleep
-#define __sleep sleep
-#undef __strcasecmp
-#define __strcasecmp strcasecmp
-#undef __vsnprintf
-#define __vsnprintf vsnprintf
-
-#endif /* !_LIBC */
-
-#ifndef __set_errno
-#define __set_errno(e) (errno = (e))
-#endif
diff --git a/newlib/libc/sys/linux/argp/argp-parse.c b/newlib/libc/sys/linux/argp/argp-parse.c
deleted file mode 100644
index 38211e3e2..000000000
--- a/newlib/libc/sys/linux/argp/argp-parse.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/* Hierarchial argument parsing, layered over getopt
-   Copyright (C) 1995, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <limits.h>
-#include <getopt.h>
-
-#ifndef _
-/* This is for other GNU distributions with internationalized messages.
-   When compiling libc, the _ macro is predefined.  */
-# if defined HAVE_LIBINTL_H || defined _LIBC
-#  include <libintl.h>
-#  ifdef _LIBC
-#   undef dgettext
-#   define dgettext(domain, msgid) __dcgettext (domain, msgid, LC_MESSAGES)
-#  endif
-# else
-#  define dgettext(domain, msgid) (msgid)
-#  define gettext(msgid) (msgid)
-# endif
-#endif
-#ifndef N_
-# define N_(msgid) (msgid)
-#endif
-
-#if _LIBC - 0
-#include <bits/libc-lock.h>
-#else
-#ifdef HAVE_CTHREADS_H
-#include <cthreads.h>
-#endif
-#endif /* _LIBC */
-
-#include <argp.h>
-#include "argp-namefrob.h"
-
-/* Getopt return values.  */
-#define KEY_END (-1)		/* The end of the options.  */
-#define KEY_ARG 1		/* A non-option argument.  */
-#define KEY_ERR '?'		/* An error parsing the options.  */
-
-/* The meta-argument used to prevent any further arguments being interpreted
-   as options.  */
-#define QUOTE "--"
-
-/* The number of bits we steal in a long-option value for our own use.  */
-#define GROUP_BITS CHAR_BIT
-
-/* The number of bits available for the user value.  */
-#define USER_BITS ((sizeof ((struct option *)0)->val * CHAR_BIT) - GROUP_BITS)
-#define USER_MASK ((1 << USER_BITS) - 1)
-
-/* EZ alias for ARGP_ERR_UNKNOWN.  */
-#define EBADKEY ARGP_ERR_UNKNOWN
-
-/* Default options.  */
-
-/* When argp is given the --HANG switch, _ARGP_HANG is set and argp will sleep
-   for one second intervals, decrementing _ARGP_HANG until it's zero.  Thus
-   you can force the program to continue by attaching a debugger and setting
-   it to 0 yourself.  */
-volatile int _argp_hang;
-
-#define OPT_PROGNAME	-2
-#define OPT_USAGE	-3
-#define OPT_HANG	-4
-
-static const struct argp_option argp_default_options[] =
-{
-  {"help",	  '?',    	0, 0,  N_("Give this help list"), -1},
-  {"usage",	  OPT_USAGE,	0, 0,  N_("Give a short usage message")},
-  {"program-name",OPT_PROGNAME,"NAME", OPTION_HIDDEN, N_("Set the program name")},
-  {"HANG",	  OPT_HANG,    "SECS", OPTION_ARG_OPTIONAL | OPTION_HIDDEN,
-     N_("Hang for SECS seconds (default 3600)")},
-  {0, 0}
-};
-
-static error_t
-argp_default_parser (int key, char *arg, struct argp_state *state)
-{
-  switch (key)
-    {
-    case '?':
-      __argp_state_help (state, state->out_stream, ARGP_HELP_STD_HELP);
-      break;
-    case OPT_USAGE:
-      __argp_state_help (state, state->out_stream,
-		       ARGP_HELP_USAGE | ARGP_HELP_EXIT_OK);
-      break;
-
-    case OPT_PROGNAME:		/* Set the program name.  */
-      program_invocation_name = arg;
-
-      /* [Note that some systems only have PROGRAM_INVOCATION_SHORT_NAME (aka
-	 __PROGNAME), in which case, PROGRAM_INVOCATION_NAME is just defined
-	 to be that, so we have to be a bit careful here.]  */
-      arg = strrchr (arg, '/');
-      if (arg)
-	program_invocation_short_name = arg + 1;
-      else
-	program_invocation_short_name = program_invocation_name;
-
-      /* Update what we use for messages.  */
-      state->name = program_invocation_short_name;
-
-      if ((state->flags & (ARGP_PARSE_ARGV0 | ARGP_NO_ERRS))
-	  == ARGP_PARSE_ARGV0)
-	/* Update what getopt uses too.  */
-	state->argv[0] = program_invocation_name;
-
-      break;
-
-    case OPT_HANG:
-      _argp_hang = atoi (arg ? arg : "3600");
-      while (_argp_hang-- > 0)
-	__sleep (1);
-      break;
-
-    default:
-      return EBADKEY;
-    }
-  return 0;
-}
-
-static const struct argp argp_default_argp =
-  {argp_default_options, &argp_default_parser, NULL, NULL, NULL, NULL, "libc"};
-
-
-static const struct argp_option argp_version_options[] =
-{
-  {"version",	  'V',    	0, 0,  N_("Print program version"), -1},
-  {0, 0}
-};
-
-static error_t
-argp_version_parser (int key, char *arg, struct argp_state *state)
-{
-  switch (key)
-    {
-    case 'V':
-      if (argp_program_version_hook)
-	(*argp_program_version_hook) (state->out_stream, state);
-      else if (argp_program_version)
-	fprintf (state->out_stream, "%s\n", argp_program_version);
-      else
-	__argp_error (state, dgettext (state->root_argp->argp_domain,
-				       "(PROGRAM ERROR) No version known!?"));
-      if (! (state->flags & ARGP_NO_EXIT))
-	exit (0);
-      break;
-    default:
-      return EBADKEY;
-    }
-  return 0;
-}
-
-static const struct argp argp_version_argp =
-  {argp_version_options, &argp_version_parser, NULL, NULL, NULL, NULL, "libc"};
-
-/* Returns the offset into the getopt long options array LONG_OPTIONS of a
-   long option with called NAME, or -1 if none is found.  Passing NULL as
-   NAME will return the number of options.  */
-static int
-find_long_option (struct option *long_options, const char *name)
-{
-  struct option *l = long_options;
-  while (l->name != NULL)
-    if (name != NULL && strcmp (l->name, name) == 0)
-      return l - long_options;
-    else
-      l++;
-  if (name == NULL)
-    return l - long_options;
-  else
-    return -1;
-}
-
-/* If we can, we regulate access to getopt, which is non-reentrant, with a
-   mutex.  Since the case we're trying to guard against is two different
-   threads interfering, and it's possible that someone might want to call
-   argp_parse recursively (they're careful), we use a recursive lock if
-   possible.  */
-
-#if _LIBC - 0
-
-__libc_lock_define_initialized_recursive (static, getopt_lock)
-#define LOCK_GETOPT   __libc_lock_lock_recursive (getopt_lock)
-#define UNLOCK_GETOPT __libc_lock_unlock_recursive (getopt_lock)
-
-#else /* !_LIBC */
-#ifdef HAVE_CTHREADS_H
-
-static struct mutex getopt_lock = MUTEX_INITIALIZER;
-#define LOCK_GETOPT   mutex_lock (&getopt_lock)
-#define UNLOCK_GETOPT mutex_unlock (&getopt_lock)
-
-#else /* !HAVE_CTHREADS_H */
-
-#define LOCK_GETOPT    (void)0
-#define UNLOCK_GETOPT  (void)0
-
-#endif /* HAVE_CTHREADS_H */
-#endif /* _LIBC */
-
-/* This hack to allow programs that know what's going on to call argp
-   recursively.  If someday argp is changed not to use the non-reentrant
-   getopt interface, we can get rid of this shit.  XXX */
-void
-_argp_unlock_xxx (void)
-{
-  UNLOCK_GETOPT;
-}
-
-/* The state of a `group' during parsing.  Each group corresponds to a
-   particular argp structure from the tree of such descending from the top
-   level argp passed to argp_parse.  */
-struct group
-{
-  /* This group's parsing function.  */
-  argp_parser_t parser;
-
-  /* Which argp this group is from.  */
-  const struct argp *argp;
-
-  /* Points to the point in SHORT_OPTS corresponding to the end of the short
-     options for this group.  We use it to determine from which group a
-     particular short options is from.  */
-  char *short_end;
-
-  /* The number of non-option args sucessfully handled by this parser.  */
-  unsigned args_processed;
-
-  /* This group's parser's parent's group.  */
-  struct group *parent;
-  unsigned parent_index;	/* And the our position in the parent.   */
-
-  /* These fields are swapped into and out of the state structure when
-     calling this group's parser.  */
-  void *input, **child_inputs;
-  void *hook;
-};
-
-/* Call GROUP's parser with KEY and ARG, swapping any group-specific info
-   from STATE before calling, and back into state afterwards.  If GROUP has
-   no parser, EBADKEY is returned.  */
-static error_t
-group_parse (struct group *group, struct argp_state *state, int key, char *arg)
-{
-  if (group->parser)
-    {
-      error_t err;
-      state->hook = group->hook;
-      state->input = group->input;
-      state->child_inputs = group->child_inputs;
-      state->arg_num = group->args_processed;
-      err = (*group->parser)(key, arg, state);
-      group->hook = state->hook;
-      return err;
-    }
-  else
-    return EBADKEY;
-}
-
-struct parser
-{
-  const struct argp *argp;
-
-  /* SHORT_OPTS is the getopt short options string for the union of all the
-     groups of options.  */
-  char *short_opts;
-  /* LONG_OPTS is the array of getop long option structures for the union of
-     all the groups of options.  */
-  struct option *long_opts;
-
-  /* States of the various parsing groups.  */
-  struct group *groups;
-  /* The end of the GROUPS array.  */
-  struct group *egroup;
-  /* An vector containing storage for the CHILD_INPUTS field in all groups.  */
-  void **child_inputs;
-
-  /* True if we think using getopt is still useful; if false, then
-     remaining arguments are just passed verbatim with ARGP_KEY_ARG.  This is
-     cleared whenever getopt returns KEY_END, but may be set again if the user
-     moves the next argument pointer backwards.  */
-  int try_getopt;
-
-  /* State block supplied to parsing routines.  */
-  struct argp_state state;
-
-  /* Memory used by this parser.  */
-  void *storage;
-};
-
-/* The next usable entries in the various parser tables being filled in by
-   convert_options.  */
-struct parser_convert_state
-{
-  struct parser *parser;
-  char *short_end;
-  struct option *long_end;
-  void **child_inputs_end;
-};
-
-/* Converts all options in ARGP (which is put in GROUP) and ancestors
-   into getopt options stored in SHORT_OPTS and LONG_OPTS; SHORT_END and
-   CVT->LONG_END are the points at which new options are added.  Returns the
-   next unused group entry.  CVT holds state used during the conversion.  */
-static struct group *
-convert_options (const struct argp *argp,
-		 struct group *parent, unsigned parent_index,
-		 struct group *group, struct parser_convert_state *cvt)
-{
-  /* REAL is the most recent non-alias value of OPT.  */
-  const struct argp_option *real = argp->options;
-  const struct argp_child *children = argp->children;
-
-  if (real || argp->parser)
-    {
-      const struct argp_option *opt;
-
-      if (real)
-	for (opt = real; !__option_is_end (opt); opt++)
-	  {
-	    if (! (opt->flags & OPTION_ALIAS))
-	      /* OPT isn't an alias, so we can use values from it.  */
-	      real = opt;
-
-	    if (! (real->flags & OPTION_DOC))
-	      /* A real option (not just documentation).  */
-	      {
-		if (__option_is_short (opt))
-		  /* OPT can be used as a short option.  */
-		  {
-		    *cvt->short_end++ = opt->key;
-		    if (real->arg)
-		      {
-			*cvt->short_end++ = ':';
-			if (real->flags & OPTION_ARG_OPTIONAL)
-			  *cvt->short_end++ = ':';
-		      }
-		    *cvt->short_end = '\0'; /* keep 0 terminated */
-		  }
-
-		if (opt->name
-		    && find_long_option (cvt->parser->long_opts, opt->name) < 0)
-		  /* OPT can be used as a long option.  */
-		  {
-		    cvt->long_end->name = opt->name;
-		    cvt->long_end->has_arg =
-		      (real->arg
-		       ? (real->flags & OPTION_ARG_OPTIONAL
-			  ? optional_argument
-			  : required_argument)
-		       : no_argument);
-		    cvt->long_end->flag = 0;
-		    /* we add a disambiguating code to all the user's
-		       values (which is removed before we actually call
-		       the function to parse the value); this means that
-		       the user loses use of the high 8 bits in all his
-		       values (the sign of the lower bits is preserved
-		       however)...  */
-		    cvt->long_end->val =
-		      ((opt->key | real->key) & USER_MASK)
-		      + (((group - cvt->parser->groups) + 1) << USER_BITS);
-
-		    /* Keep the LONG_OPTS list terminated.  */
-		    (++cvt->long_end)->name = NULL;
-		  }
-	      }
-	    }
-
-      group->parser = argp->parser;
-      group->argp = argp;
-      group->short_end = cvt->short_end;
-      group->args_processed = 0;
-      group->parent = parent;
-      group->parent_index = parent_index;
-      group->input = 0;
-      group->hook = 0;
-      group->child_inputs = 0;
-
-      if (children)
-	/* Assign GROUP's CHILD_INPUTS field some space from
-           CVT->child_inputs_end.*/
-	{
-	  unsigned num_children = 0;
-	  while (children[num_children].argp)
-	    num_children++;
-	  group->child_inputs = cvt->child_inputs_end;
-	  cvt->child_inputs_end += num_children;
-	}
-
-      parent = group++;
-    }
-  else
-    parent = 0;
-
-  if (children)
-    {
-      unsigned index = 0;
-      while (children->argp)
-	group =
-	  convert_options (children++->argp, parent, index++, group, cvt);
-    }
-
-  return group;
-}
-
-/* Find the merged set of getopt options, with keys appropiately prefixed. */
-static void
-parser_convert (struct parser *parser, const struct argp *argp, int flags)
-{
-  struct parser_convert_state cvt;
-
-  cvt.parser = parser;
-  cvt.short_end = parser->short_opts;
-  cvt.long_end = parser->long_opts;
-  cvt.child_inputs_end = parser->child_inputs;
-
-  if (flags & ARGP_IN_ORDER)
-    *cvt.short_end++ = '-';
-  else if (flags & ARGP_NO_ARGS)
-    *cvt.short_end++ = '+';
-  *cvt.short_end = '\0';
-
-  cvt.long_end->name = NULL;
-
-  parser->argp = argp;
-
-  if (argp)
-    parser->egroup = convert_options (argp, 0, 0, parser->groups, &cvt);
-  else
-    parser->egroup = parser->groups; /* No parsers at all! */
-}
-
-/* Lengths of various parser fields which we will allocated.  */
-struct parser_sizes
-{
-  size_t short_len;		/* Getopt short options string.  */
-  size_t long_len;		/* Getopt long options vector.  */
-  size_t num_groups;		/* Group structures we allocate.  */
-  size_t num_child_inputs;	/* Child input slots.  */
-};
-
-/* For ARGP, increments the NUM_GROUPS field in SZS by the total number of
- argp structures descended from it, and the SHORT_LEN & LONG_LEN fields by
- the maximum lengths of the resulting merged getopt short options string and
- long-options array, respectively.  */
-static void
-calc_sizes (const struct argp *argp,  struct parser_sizes *szs)
-{
-  const struct argp_child *child = argp->children;
-  const struct argp_option *opt = argp->options;
-
-  if (opt || argp->parser)
-    {
-      szs->num_groups++;
-      if (opt)
-	{
-	  int num_opts = 0;
-	  while (!__option_is_end (opt++))
-	    num_opts++;
-	  szs->short_len += num_opts * 3; /* opt + up to 2 `:'s */
-	  szs->long_len += num_opts;
-	}
-    }
-
-  if (child)
-    while (child->argp)
-      {
-	calc_sizes ((child++)->argp, szs);
-	szs->num_child_inputs++;
-      }
-}
-
-/* Initializes PARSER to parse ARGP in a manner described by FLAGS.  */
-static error_t
-parser_init (struct parser *parser, const struct argp *argp,
-	     int argc, char **argv, int flags, void *input)
-{
-  error_t err = 0;
-  struct group *group;
-  struct parser_sizes szs;
-
-  szs.short_len = (flags & ARGP_NO_ARGS) ? 0 : 1;
-  szs.long_len = 0;
-  szs.num_groups = 0;
-  szs.num_child_inputs = 0;
-
-  if (argp)
-    calc_sizes (argp, &szs);
-
-  /* Lengths of the various bits of storage used by PARSER.  */
-#define GLEN (szs.num_groups + 1) * sizeof (struct group)
-#define CLEN (szs.num_child_inputs * sizeof (void *))
-#define LLEN ((szs.long_len + 1) * sizeof (struct option))
-#define SLEN (szs.short_len + 1)
-
-  parser->storage = malloc (GLEN + CLEN + LLEN + SLEN);
-  if (! parser->storage)
-    return ENOMEM;
-
-  parser->groups = parser->storage;
-  parser->child_inputs = parser->storage + GLEN;
-  parser->long_opts = parser->storage + GLEN + CLEN;
-  parser->short_opts = parser->storage + GLEN + CLEN + LLEN;
-
-  memset (parser->child_inputs, 0, szs.num_child_inputs * sizeof (void *));
-  parser_convert (parser, argp, flags);
-
-  memset (&parser->state, 0, sizeof (struct argp_state));
-  parser->state.root_argp = parser->argp;
-  parser->state.argc = argc;
-  parser->state.argv = argv;
-  parser->state.flags = flags;
-  parser->state.err_stream = stderr;
-  parser->state.out_stream = stdout;
-  parser->state.next = 0;	/* Tell getopt to initialize.  */
-  parser->state.pstate = parser;
-
-  parser->try_getopt = 1;
-
-  /* Call each parser for the first time, giving it a chance to propagate
-     values to child parsers.  */
-  if (parser->groups < parser->egroup)
-    parser->groups->input = input;
-  for (group = parser->groups;
-       group < parser->egroup && (!err || err == EBADKEY);
-       group++)
-    {
-      if (group->parent)
-	/* If a child parser, get the initial input value from the parent. */
-	group->input = group->parent->child_inputs[group->parent_index];
-
-      if (!group->parser
-	  && group->argp->children && group->argp->children->argp)
-	/* For the special case where no parsing function is supplied for an
-	   argp, propagate its input to its first child, if any (this just
-	   makes very simple wrapper argps more convenient).  */
-	group->child_inputs[0] = group->input;
-
-      err = group_parse (group, &parser->state, ARGP_KEY_INIT, 0);
-    }
-  if (err == EBADKEY)
-    err = 0;			/* Some parser didn't understand.  */
-
-  if (err)
-    return err;
-
-  /* Getopt is (currently) non-reentrant.  */
-  LOCK_GETOPT;
-
-  if (parser->state.flags & ARGP_NO_ERRS)
-    {
-      opterr = 0;
-      if (parser->state.flags & ARGP_PARSE_ARGV0)
-	/* getopt always skips ARGV[0], so we have to fake it out.  As long
-	   as OPTERR is 0, then it shouldn't actually try to access it.  */
-	parser->state.argv--, parser->state.argc++;
-    }
-  else
-    opterr = 1;		/* Print error messages.  */
-
-  if (parser->state.argv == argv && argv[0])
-    /* There's an argv[0]; use it for messages.  */
-    {
-      char *short_name = strrchr (argv[0], '/');
-      parser->state.name = short_name ? short_name + 1 : argv[0];
-    }
-  else
-    parser->state.name = program_invocation_short_name;
-
-  return 0;
-}
-
-/* Free any storage consumed by PARSER (but not PARSER itself).  */
-static error_t
-parser_finalize (struct parser *parser,
-		 error_t err, int arg_ebadkey, int *end_index)
-{
-  struct group *group;
-
-  UNLOCK_GETOPT;
-
-  if (err == EBADKEY && arg_ebadkey)
-    /* Suppress errors generated by unparsed arguments.  */
-    err = 0;
-
-  if (! err)
-    {
-      if (parser->state.next == parser->state.argc)
-	/* We successfully parsed all arguments!  Call all the parsers again,
-	   just a few more times... */
-	{
-	  for (group = parser->groups;
-	       group < parser->egroup && (!err || err==EBADKEY);
-	       group++)
-	    if (group->args_processed == 0)
-	      err = group_parse (group, &parser->state, ARGP_KEY_NO_ARGS, 0);
-	  for (group = parser->egroup - 1;
-	       group >= parser->groups && (!err || err==EBADKEY);
-	       group--)
-	    err = group_parse (group, &parser->state, ARGP_KEY_END, 0);
-
-	  if (err == EBADKEY)
-	    err = 0;		/* Some parser didn't understand.  */
-
-	  /* Tell the user that all arguments are parsed.  */
-	  if (end_index)
-	    *end_index = parser->state.next;
-	}
-      else if (end_index)
-	/* Return any remaining arguments to the user.  */
-	*end_index = parser->state.next;
-      else
-	/* No way to return the remaining arguments, they must be bogus. */
-	{
-	  if (!(parser->state.flags & ARGP_NO_ERRS)
-	      && parser->state.err_stream)
-	    fprintf (parser->state.err_stream,
-		     dgettext (parser->argp->argp_domain,
-			       "%s: Too many arguments\n"),
-		     parser->state.name);
-	  err = EBADKEY;
-	}
-    }
-
-  /* Okay, we're all done, with either an error or success; call the parsers
-     to indicate which one.  */
-
-  if (err)
-    {
-      /* Maybe print an error message.  */
-      if (err == EBADKEY)
-	/* An appropriate message describing what the error was should have
-	   been printed earlier.  */
-	__argp_state_help (&parser->state, parser->state.err_stream,
-			   ARGP_HELP_STD_ERR);
-
-      /* Since we didn't exit, give each parser an error indication.  */
-      for (group = parser->groups; group < parser->egroup; group++)
-	group_parse (group, &parser->state, ARGP_KEY_ERROR, 0);
-    }
-  else
-    /* Notify parsers of success, and propagate back values from parsers.  */
-    {
-      /* We pass over the groups in reverse order so that child groups are
-	 given a chance to do there processing before passing back a value to
-	 the parent.  */
-      for (group = parser->egroup - 1
-	   ; group >= parser->groups && (!err || err == EBADKEY)
-	   ; group--)
-	err = group_parse (group, &parser->state, ARGP_KEY_SUCCESS, 0);
-      if (err == EBADKEY)
-	err = 0;		/* Some parser didn't understand.  */
-    }
-
-  /* Call parsers once more, to do any final cleanup.  Errors are ignored.  */
-  for (group = parser->egroup - 1; group >= parser->groups; group--)
-    group_parse (group, &parser->state, ARGP_KEY_FINI, 0);
-
-  if (err == EBADKEY)
-    err = EINVAL;
-
-  free (parser->storage);
-
-  return err;
-}
-
-/* Call the user parsers to parse the non-option argument VAL, at the current
-   position, returning any error.  The state NEXT pointer is assumed to have
-   been adjusted (by getopt) to point after this argument; this function will
-   adjust it correctly to reflect however many args actually end up being
-   consumed.  */
-static error_t
-parser_parse_arg (struct parser *parser, char *val)
-{
-  /* Save the starting value of NEXT, first adjusting it so that the arg
-     we're parsing is again the front of the arg vector.  */
-  int index = --parser->state.next;
-  error_t err = EBADKEY;
-  struct group *group;
-  int key = 0;			/* Which of ARGP_KEY_ARG[S] we used.  */
-
-  /* Try to parse the argument in each parser.  */
-  for (group = parser->groups
-       ; group < parser->egroup && err == EBADKEY
-       ; group++)
-    {
-      parser->state.next++;	/* For ARGP_KEY_ARG, consume the arg.  */
-      key = ARGP_KEY_ARG;
-      err = group_parse (group, &parser->state, key, val);
-
-      if (err == EBADKEY)
-	/* This parser doesn't like ARGP_KEY_ARG; try ARGP_KEY_ARGS instead. */
-	{
-	  parser->state.next--;	/* For ARGP_KEY_ARGS, put back the arg.  */
-	  key = ARGP_KEY_ARGS;
-	  err = group_parse (group, &parser->state, key, 0);
-	}
-    }
-
-  if (! err)
-    {
-      if (key == ARGP_KEY_ARGS)
-	/* The default for ARGP_KEY_ARGS is to assume that if NEXT isn't
-	   changed by the user, *all* arguments should be considered
-	   consumed.  */
-	parser->state.next = parser->state.argc;
-
-      if (parser->state.next > index)
-	/* Remember that we successfully processed a non-option
-	   argument -- but only if the user hasn't gotten tricky and set
-	   the clock back.  */
-	(--group)->args_processed += (parser->state.next - index);
-      else
-	/* The user wants to reparse some args, give getopt another try.  */
-	parser->try_getopt = 1;
-    }
-
-  return err;
-}
-
-/* Call the user parsers to parse the option OPT, with argument VAL, at the
-   current position, returning any error.  */
-static error_t
-parser_parse_opt (struct parser *parser, int opt, char *val)
-{
-  /* The group key encoded in the high bits; 0 for short opts or
-     group_number + 1 for long opts.  */
-  int group_key = opt >> USER_BITS;
-  error_t err = EBADKEY;
-
-  if (group_key == 0)
-    /* A short option.  By comparing OPT's position in SHORT_OPTS to the
-       various starting positions in each group's SHORT_END field, we can
-       determine which group OPT came from.  */
-    {
-      struct group *group;
-      char *short_index = strchr (parser->short_opts, opt);
-
-      if (short_index)
-	for (group = parser->groups; group < parser->egroup; group++)
-	  if (group->short_end > short_index)
-	    {
-	      err = group_parse (group, &parser->state, opt, optarg);
-	      break;
-	    }
-    }
-  else
-    /* A long option.  We use shifts instead of masking for extracting
-       the user value in order to preserve the sign.  */
-    err =
-      group_parse (&parser->groups[group_key - 1], &parser->state,
-		   (opt << GROUP_BITS) >> GROUP_BITS, optarg);
-
-  if (err == EBADKEY)
-    /* At least currently, an option not recognized is an error in the
-       parser, because we pre-compute which parser is supposed to deal
-       with each option.  */
-    {
-      static const char bad_key_err[] =
-	N_("(PROGRAM ERROR) Option should have been recognized!?");
-      if (group_key == 0)
-	__argp_error (&parser->state, "-%c: %s", opt,
-		      dgettext (parser->argp->argp_domain, bad_key_err));
-      else
-	{
-	  struct option *long_opt = parser->long_opts;
-	  while (long_opt->val != opt && long_opt->name)
-	    long_opt++;
-	  __argp_error (&parser->state, "--%s: %s",
-			long_opt->name ? long_opt->name : "???",
-			dgettext (parser->argp->argp_domain, bad_key_err));
-	}
-    }
-
-  return err;
-}
-
-/* Parse the next argument in PARSER (as indicated by PARSER->state.next).
-   Any error from the parsers is returned, and *ARGP_EBADKEY indicates
-   whether a value of EBADKEY is due to an unrecognized argument (which is
-   generally not fatal).  */
-static error_t
-parser_parse_next (struct parser *parser, int *arg_ebadkey)
-{
-  int opt;
-  error_t err = 0;
-
-  if (parser->state.quoted && parser->state.next < parser->state.quoted)
-    /* The next argument pointer has been moved to before the quoted
-       region, so pretend we never saw the quoting `--', and give getopt
-       another chance.  If the user hasn't removed it, getopt will just
-       process it again.  */
-    parser->state.quoted = 0;
-
-  if (parser->try_getopt && !parser->state.quoted)
-    /* Give getopt a chance to parse this.  */
-    {
-      optind = parser->state.next; /* Put it back in OPTIND for getopt.  */
-      optopt = KEY_END;	/* Distinguish KEY_ERR from a real option.  */
-      if (parser->state.flags & ARGP_LONG_ONLY)
-	opt = getopt_long_only (parser->state.argc, parser->state.argv,
-				parser->short_opts, parser->long_opts, 0);
-      else
-	opt = getopt_long (parser->state.argc, parser->state.argv,
-			   parser->short_opts, parser->long_opts, 0);
-      parser->state.next = optind; /* And see what getopt did.  */
-
-      if (opt == KEY_END)
-	/* Getopt says there are no more options, so stop using
-	   getopt; we'll continue if necessary on our own.  */
-	{
-	  parser->try_getopt = 0;
-	  if (parser->state.next > 1
-	      && strcmp (parser->state.argv[parser->state.next - 1], QUOTE)
-	           == 0)
-	    /* Not only is this the end of the options, but it's a
-	       `quoted' region, which may have args that *look* like
-	       options, so we definitely shouldn't try to use getopt past
-	       here, whatever happens.  */
-	    parser->state.quoted = parser->state.next;
-	}
-      else if (opt == KEY_ERR && optopt != KEY_END)
-	/* KEY_ERR can have the same value as a valid user short
-	   option, but in the case of a real error, getopt sets OPTOPT
-	   to the offending character, which can never be KEY_END.  */
-	{
-	  *arg_ebadkey = 0;
-	  return EBADKEY;
-	}
-    }
-  else
-    opt = KEY_END;
-
-  if (opt == KEY_END)
-    {
-      /* We're past what getopt considers the options.  */
-      if (parser->state.next >= parser->state.argc
-	  || (parser->state.flags & ARGP_NO_ARGS))
-	/* Indicate that we're done.  */
-	{
-	  *arg_ebadkey = 1;
-	  return EBADKEY;
-	}
-      else
-	/* A non-option arg; simulate what getopt might have done.  */
-	{
-	  opt = KEY_ARG;
-	  optarg = parser->state.argv[parser->state.next++];
-	}
-    }
-
-  if (opt == KEY_ARG)
-    /* A non-option argument; try each parser in turn.  */
-    err = parser_parse_arg (parser, optarg);
-  else
-    err = parser_parse_opt (parser, opt, optarg);
-
-  if (err == EBADKEY)
-    *arg_ebadkey = (opt == KEY_END || opt == KEY_ARG);
-
-  return err;
-}
-
-/* Parse the options strings in ARGC & ARGV according to the argp in ARGP.
-   FLAGS is one of the ARGP_ flags above.  If END_INDEX is non-NULL, the
-   index in ARGV of the first unparsed option is returned in it.  If an
-   unknown option is present, EINVAL is returned; if some parser routine
-   returned a non-zero value, it is returned; otherwise 0 is returned.  */
-error_t
-__argp_parse (const struct argp *argp, int argc, char **argv, unsigned flags,
-	      int *end_index, void *input)
-{
-  error_t err;
-  struct parser parser;
-
-  /* If true, then err == EBADKEY is a result of a non-option argument failing
-     to be parsed (which in some cases isn't actually an error).  */
-  int arg_ebadkey = 0;
-
-  if (! (flags & ARGP_NO_HELP))
-    /* Add our own options.  */
-    {
-      struct argp_child *child = alloca (4 * sizeof (struct argp_child));
-      struct argp *top_argp = alloca (sizeof (struct argp));
-
-      /* TOP_ARGP has no options, it just serves to group the user & default
-	 argps.  */
-      memset (top_argp, 0, sizeof (*top_argp));
-      top_argp->children = child;
-
-      memset (child, 0, 4 * sizeof (struct argp_child));
-
-      if (argp)
-	(child++)->argp = argp;
-      (child++)->argp = &argp_default_argp;
-      if (argp_program_version || argp_program_version_hook)
-	(child++)->argp = &argp_version_argp;
-      child->argp = 0;
-
-      argp = top_argp;
-    }
-
-  /* Construct a parser for these arguments.  */
-  err = parser_init (&parser, argp, argc, argv, flags, input);
-
-  if (! err)
-    /* Parse! */
-    {
-      while (! err)
-	err = parser_parse_next (&parser, &arg_ebadkey);
-      err = parser_finalize (&parser, err, arg_ebadkey, end_index);
-    }
-
-  return err;
-}
-#ifdef weak_alias
-weak_alias (__argp_parse, argp_parse)
-#endif
-
-/* Return the input field for ARGP in the parser corresponding to STATE; used
-   by the help routines.  */
-void *
-__argp_input (const struct argp *argp, const struct argp_state *state)
-{
-  if (state)
-    {
-      struct group *group;
-      struct parser *parser = state->pstate;
-
-      for (group = parser->groups; group < parser->egroup; group++)
-	if (group->argp == argp)
-	  return group->input;
-    }
-
-  return 0;
-}
-#ifdef weak_alias
-weak_alias (__argp_input, _argp_input)
-#endif
diff --git a/newlib/libc/sys/linux/argp/argp-pv.c b/newlib/libc/sys/linux/argp/argp-pv.c
deleted file mode 100644
index 5987956a9..000000000
--- a/newlib/libc/sys/linux/argp/argp-pv.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Default definition for ARGP_PROGRAM_VERSION.
-   Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* If set by the user program to a non-zero value, then a default option
-   --version is added (unless the ARGP_NO_HELP flag is used), which will
-   print this this string followed by a newline and exit (unless the
-   ARGP_NO_EXIT flag is used).  Overridden by ARGP_PROGRAM_VERSION_HOOK.  */
-const char *argp_program_version;
diff --git a/newlib/libc/sys/linux/argp/argp-pvh.c b/newlib/libc/sys/linux/argp/argp-pvh.c
deleted file mode 100644
index 8a8fd309d..000000000
--- a/newlib/libc/sys/linux/argp/argp-pvh.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Default definition for ARGP_PROGRAM_VERSION_HOOK.
-   Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <argp.h>
-
-/* If set by the user program to a non-zero value, then a default option
-   --version is added (unless the ARGP_NO_HELP flag is used), which calls
-   this function with a stream to print the version to and a pointer to the
-   current parsing state, and then exits (unless the ARGP_NO_EXIT flag is
-   used).  This variable takes precedent over ARGP_PROGRAM_VERSION.  */
-void (*argp_program_version_hook) (FILE *stream, struct argp_state *state);
diff --git a/newlib/libc/sys/linux/argp/argp-xinl.c b/newlib/libc/sys/linux/argp/argp-xinl.c
deleted file mode 100644
index 0d64b1efb..000000000
--- a/newlib/libc/sys/linux/argp/argp-xinl.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Real definitions for extern inline functions in argp.h
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <features.h>
-
-#ifndef __USE_EXTERN_INLINES
-# define __USE_EXTERN_INLINES	1
-#endif
-#define ARGP_EI
-#undef __OPTIMIZE__
-#define __OPTIMIZE__
-#include <argp.h>
-
-/* Add weak aliases.  */
-#if _LIBC - 0 && defined (weak_alias)
-
-weak_alias (__argp_usage, argp_usage)
-weak_alias (__option_is_short, _option_is_short)
-weak_alias (__option_is_end, _option_is_end)
-
-#endif
diff --git a/newlib/libc/sys/linux/bp-checks.h b/newlib/libc/sys/linux/bp-checks.h
deleted file mode 100644
index efbb84716..000000000
--- a/newlib/libc/sys/linux/bp-checks.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* Bounded-pointer checking macros for C.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Greg McGary <greg@mcgary.org>
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _bp_checks_h_
-#define _bp_checks_h_ 1
-
-#if __BOUNDED_POINTERS__
-
-# define BOUNDS_VIOLATED (__builtin_trap (), 0)
-
-/* Verify that pointer's value >= low.  Return pointer value.  */
-# define CHECK_BOUNDS_LOW(ARG)					\
-  (((__ptrvalue (ARG) < __ptrlow (ARG)) && BOUNDS_VIOLATED),	\
-   __ptrvalue (ARG))
-
-/* Verify that pointer's value < high.  Return pointer value.  */
-# define CHECK_BOUNDS_HIGH(ARG)				\
-  (((__ptrvalue (ARG) > __ptrhigh (ARG)) && BOUNDS_VIOLATED),	\
-   __ptrvalue (ARG))
-
-# define _CHECK_N(ARG, N, COND)				\
-  (((COND)						\
-    && (__ptrvalue (ARG) < __ptrlow (ARG)		\
-	|| __ptrvalue (ARG) + (N) > __ptrhigh (ARG))	\
-    && BOUNDS_VIOLATED),				\
-   __ptrvalue (ARG))
-
-extern void *__unbounded __ubp_memchr (const void *__unbounded, int, unsigned);
-
-# define _CHECK_STRING(ARG, COND)				\
-  (((COND)							\
-    && (__ptrvalue (ARG) < __ptrlow (ARG)			\
-	|| !__ubp_memchr (__ptrvalue (ARG), '\0',			\
-		      (__ptrhigh (ARG) - __ptrvalue (ARG))))	\
-    && BOUNDS_VIOLATED),					\
-   __ptrvalue (ARG))
-
-/* Check bounds of a pointer seated to an array of N objects.  */
-# define CHECK_N(ARG, N) _CHECK_N ((ARG), (N), 1)
-/* Same as CHECK_N, but tolerate ARG == NULL.  */
-# define CHECK_N_NULL_OK(ARG, N) _CHECK_N ((ARG), (N), __ptrvalue (ARG))
-
-/* Check bounds of a pointer seated to a single object.  */
-# define CHECK_1(ARG) CHECK_N ((ARG), 1)
-/* Same as CHECK_1, but tolerate ARG == NULL.  */
-# define CHECK_1_NULL_OK(ARG) CHECK_N_NULL_OK ((ARG), 1)
-
-/* Check for NUL-terminator within string's bounds.  */
-# define CHECK_STRING(ARG) _CHECK_STRING ((ARG), 1)
-/* Same as CHECK_STRING, but tolerate ARG == NULL.  */
-# define CHECK_STRING_NULL_OK(ARG) _CHECK_STRING ((ARG), __ptrvalue (ARG))
-
-/* Check bounds of signal syscall args with type sigset_t.  */
-# define CHECK_SIGSET(SET) CHECK_N ((SET), _NSIG / (8 * sizeof *(SET)))
-/* Same as CHECK_SIGSET, but tolerate SET == NULL.  */
-# define CHECK_SIGSET_NULL_OK(SET) CHECK_N_NULL_OK ((SET), _NSIG / (8 * sizeof *(SET)))
-
-# if defined (_IOC_SIZESHIFT) && defined (_IOC_SIZEBITS)
-/* Extract the size of the ioctl data and check its bounds.  */
-#  define CHECK_IOCTL(ARG, CMD)						\
-  CHECK_N ((const char *) (ARG),					\
-	   (((CMD) >> _IOC_SIZESHIFT) & ((1 << _IOC_SIZEBITS) - 1)))
-# else
-/* We don't know the size of the ioctl data, so the best we can do
-   is check that the first byte is within bounds.  */
-#  define CHECK_IOCTL(ARG, CMD) CHECK_1 ((const char *) ARG)
-# endif
-
-/* Check bounds of `struct flock *' for the locking fcntl commands.  */
-# define CHECK_FCNTL(ARG, CMD)					\
-  (((CMD) == F_GETLK || (CMD) == F_SETLK || (CMD) == F_SETLKW)	\
-   ? CHECK_1 ((struct flock *) ARG) : (unsigned long) (ARG))
-
-/* Check bounds of an array of mincore residency-status flags that
-   cover a region of NBYTES.  Such a vector occupies one byte per page
-   of memory.  */
-# define CHECK_N_PAGES(ARG, NBYTES)				\
-  ({ int _page_size_ = sysconf (_SC_PAGE_SIZE);			\
-     CHECK_N ((const char *) (ARG),				\
-	      ((NBYTES) + _page_size_ - 1) / _page_size_); })
-
-/* Return a bounded pointer with value PTR that satisfies CHECK_N (PTR, N).  */
-# define BOUNDED_N(PTR, N) 				\
-  ({ __typeof (PTR) __bounded _p_;			\
-     __ptrvalue _p_ = __ptrlow _p_ = __ptrvalue (PTR);	\
-     __ptrhigh _p_ = __ptrvalue _p_ + (N);		\
-     _p_; })
-
-#else /* !__BOUNDED_POINTERS__ */
-
-/* Do nothing if not compiling with -fbounded-pointers.  */
-
-# define BOUNDS_VIOLATED
-# define CHECK_BOUNDS_LOW(ARG) (ARG)
-# define CHECK_BOUNDS_HIGH(ARG) (ARG)
-# define CHECK_1(ARG) (ARG)
-# define CHECK_1_NULL_OK(ARG) (ARG)
-# define CHECK_N(ARG, N) (ARG)
-# define CHECK_N_NULL_OK(ARG, N) (ARG)
-# define CHECK_STRING(ARG) (ARG)
-# define CHECK_SIGSET(SET) (SET)
-# define CHECK_SIGSET_NULL_OK(SET) (SET)
-# define CHECK_IOCTL(ARG, CMD) (ARG)
-# define CHECK_FCNTL(ARG, CMD) (ARG)
-# define CHECK_N_PAGES(ARG, NBYTES) (ARG)
-# define BOUNDED_N(PTR, N) (PTR)
-
-#endif /* !__BOUNDED_POINTERS__ */
-
-#define BOUNDED_1(PTR) BOUNDED_N (PTR, 1)
-
-#endif /* _bp_checks_h_ */
diff --git a/newlib/libc/sys/linux/brk.c b/newlib/libc/sys/linux/brk.c
deleted file mode 100644
index 91bb367e7..000000000
--- a/newlib/libc/sys/linux/brk.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* libc/sys/linux/brk.c - Change data segment size */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <stddef.h> /* for NULL */
-#include <sys/types.h>
-#include <sys/unistd.h>
-#include <machine/syscall.h>
-
-
-static char *curr_brk = NULL;
-
-
-#define __NR___brk __NR_brk /* Linux brk ain't no brk(2) */
-
-static _syscall1(void *,__brk,void *,end_data_segment)
-
-
-int brk(void *end_data_segment)
-{
-     char *new_brk;
-
-     new_brk = __brk(end_data_segment);
-     if (new_brk != end_data_segment) return -1;
-     curr_brk = new_brk;
-     return 0;
-}
-
-
-void *sbrk(ptrdiff_t increment) /* SHOULD be ptrdiff_t */
-{
-    char *old_brk,*new_brk;
-
-    if (!curr_brk) curr_brk = __brk(NULL);
-    new_brk = __brk(curr_brk+increment);
-    if (new_brk != curr_brk+increment) return (void *) -1;
-    old_brk = curr_brk;
-    curr_brk = new_brk;
-    return old_brk;
-}
diff --git a/newlib/libc/sys/linux/calloc.c b/newlib/libc/sys/linux/calloc.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/calloc.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/callocr.c b/newlib/libc/sys/linux/callocr.c
deleted file mode 100644
index bff43b8c3..000000000
--- a/newlib/libc/sys/linux/callocr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void *
-_calloc_r (struct _reent *ptr, size_t size, size_t len)
-{
-  return calloc (size, len);
-}
diff --git a/newlib/libc/sys/linux/cfreer.c b/newlib/libc/sys/linux/cfreer.c
deleted file mode 100644
index c7e6c2564..000000000
--- a/newlib/libc/sys/linux/cfreer.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void
-_cfree_r (struct _reent *ptr, void *mem)
-{
-  return cfree (mem);
-}
diff --git a/newlib/libc/sys/linux/cfspeed.c b/newlib/libc/sys/linux/cfspeed.c
deleted file mode 100644
index e935bf178..000000000
--- a/newlib/libc/sys/linux/cfspeed.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* `struct termios' speed frobnication functions.  Linux version.
-   Copyright (C) 1991, 92, 93, 95, 96, 97, 98, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified by Jeff Johnston, May 27, 2002 to remove kernel hack
-   as we simply ignore a cfisetspeed of 0 instead of treating it specially */
-
-#include <stddef.h>
-#include <errno.h>
-#include <termios.h>
-
-/* Return the output baud rate stored in *TERMIOS_P.  */
-speed_t
-cfgetospeed (termios_p)
-     const struct termios *termios_p;
-{
-  return termios_p->c_cflag & (CBAUD | CBAUDEX);
-}
-
-/* Return the input baud rate stored in *TERMIOS_P.
-   For Linux there is no difference between input and output
-   speed. */
-speed_t
-cfgetispeed (termios_p)
-     const struct termios *termios_p;
-{
-  return termios_p->c_cflag & (CBAUD | CBAUDEX);
-}
-
-/* Set the output baud rate stored in *TERMIOS_P to SPEED.  */
-int
-cfsetospeed  (termios_p, speed)
-     struct termios *termios_p;
-     speed_t speed;
-{
-  if ((speed & ~CBAUD) != 0
-      && (speed < B57600 || speed > __MAX_BAUD))
-    {
-      errno = (EINVAL);
-      return -1;
-    }
-
-  termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
-  termios_p->c_cflag |= speed;
-
-  return 0;
-}
-
-/* Set the input baud rate stored in *TERMIOS_P to SPEED.
-   Although for Linux there is no difference between input and output
-   speed, the numerical 0 is a special case for the input baud rate.  It
-   should set the input baud rate to the output baud rate so we do
-   nothing. */
-int
-cfsetispeed (termios_p, speed)
-     struct termios *termios_p;
-     speed_t speed;
-{
-  if ((speed & ~CBAUD) != 0
-      && (speed < B57600 || speed > __MAX_BAUD))
-    {
-      errno = (EINVAL);
-      return -1;
-    }
-
-  if (speed != 0)
-    {
-      termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
-      termios_p->c_cflag |= speed;
-    }
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/clock_getres.c b/newlib/libc/sys/linux/clock_getres.c
deleted file mode 100644
index 8bf648f51..000000000
--- a/newlib/libc/sys/linux/clock_getres.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <stdint.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <libc-internal.h>
-
-
-#if HP_TIMING_AVAIL
-/* Clock frequency of the processor.  */
-static long int nsec;
-#endif
-
-
-/* Get resolution of clock.  */
-int
-clock_getres (clockid_t clock_id, struct timespec *res)
-{
-  int retval = -1;
-
-  switch (clock_id)
-    {
-    case CLOCK_REALTIME:
-      {
-	long int clk_tck = sysconf (_SC_CLK_TCK);
-
-	if (__builtin_expect (clk_tck != -1, 1))
-	  {
-	    /* This implementation assumes that the realtime clock has a
-	       resolution higher than 1 second.  This is the case for any
-	       reasonable implementation.  */
-	    res->tv_sec = 0;
-	    res->tv_nsec = 1000000000 / clk_tck;
-
-	    retval = 0;
-	  }
-      }
-      break;
-
-#if HP_TIMING_AVAIL
-    case CLOCK_PROCESS_CPUTIME_ID:
-    case CLOCK_THREAD_CPUTIME_ID:
-      {
-	if (__builtin_expect (nsec == 0, 0))
-	  {
-	    hp_timing_t freq;
-
-	    /* This can only happen if we haven't initialized the `freq'
-	       variable yet.  Do this now. We don't have to protect this
-	       code against multiple execution since all of them should
-	       lead to the same result.  */
-	    freq = __get_clockfreq ();
-	    if (__builtin_expect (freq == 0, 0))
-	      /* Something went wrong.  */
-	      break;
-
-	    nsec = MAX (UINT64_C (1000000000) / freq, 1);
-	  }
-
-	/* File in the values.  The seconds are always zero (unless we
-	   have a 1Hz machine).  */
-	res->tv_sec = 0;
-	res->tv_nsec = nsec;
-
-	retval = 0;
-      }
-      break;
-#endif
-
-    default:
-      __set_errno (EINVAL);
-      break;
-    }
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/clock_gettime.c b/newlib/libc/sys/linux/clock_gettime.c
deleted file mode 100644
index a86786bb2..000000000
--- a/newlib/libc/sys/linux/clock_gettime.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <stdint.h>
-#include <time.h>
-#include <sys/time.h>
-#include <libc-internal.h>
-#include <hp-timing.h>
-
-
-#if HP_TIMING_AVAIL
-/* Clock frequency of the processor.  We make it a 64-bit variable
-   because some jokers are already playing with processors with more
-   than 4GHz.  */
-static hp_timing_t freq;
-
-
-/* We need the starting time for the process.  */
-extern hp_timing_t _dl_cpuclock_offset;
-
-
-/* This function is defined in the thread library.  */
-extern int __pthread_clock_gettime (hp_timing_t freq, struct timespec *tp)
-     __attribute__ ((__weak__));
-#endif
-
-
-/* Get current value of CLOCK and store it in TP.  */
-int
-clock_gettime (clockid_t clock_id, struct timespec *tp)
-{
-  struct timeval tv;
-  int retval = -1;
-
-  switch (clock_id)
-    {
-    case CLOCK_REALTIME:
-      retval = gettimeofday (&tv, NULL);
-      if (retval == 0)
-	/* Convert into `timespec'.  */
-	TIMEVAL_TO_TIMESPEC (&tv, tp);
-      break;
-
-#if HP_TIMING_AVAIL
-    case CLOCK_PROCESS_CPUTIME_ID:
-    case CLOCK_THREAD_CPUTIME_ID:
-      {
-	hp_timing_t tsc;
-
-	if (__builtin_expect (freq == 0, 0))
-	  {
-	    /* This can only happen if we haven't initialized the `freq'
-	       variable yet.  Do this now. We don't have to protect this
-	       code against multiple execution since all of them should
-	       lead to the same result.  */
-	    freq = __get_clockfreq ();
-	    if (__builtin_expect (freq == 0, 0))
-	      /* Something went wrong.  */
-	      break;
-	  }
-
-	if (clock_id == CLOCK_THREAD_CPUTIME_ID
-	    && __pthread_clock_gettime != NULL)
-	  {
-	    retval = __pthread_clock_gettime (freq, tp);
-	    break;
-	  }
-
-	/* Get the current counter.  */
-	HP_TIMING_NOW (tsc);
-
-	/* Compute the offset since the start time of the process.  */
-	tsc -= _dl_cpuclock_offset;
-
-	/* Compute the seconds.  */
-	tp->tv_sec = tsc / freq;
-
-	/* And the nanoseconds.  This computation should be stable until
-	   we get machines with about 16GHz frequency.  */
-	tp->tv_nsec = ((tsc % freq) * UINT64_C (1000000000)) / freq;
-
-	retval = 0;
-      }
-    break;
-#endif
-
-    default:
-      __set_errno (EINVAL);
-      break;
-    }
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/clock_settime.c b/newlib/libc/sys/linux/clock_settime.c
deleted file mode 100644
index 79a9b564a..000000000
--- a/newlib/libc/sys/linux/clock_settime.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <time.h>
-#include <sys/time.h>
-#include <libc-internal.h>
-
-
-#if HP_TIMING_AVAIL
-/* Clock frequency of the processor.  We make it a 64-bit variable
-   because some jokers are already playing with processors with more
-   than 4GHz.  */
-static hp_timing_t freq;
-
-
-/* We need the starting time for the process.  */
-extern hp_timing_t _dl_cpuclock_offset;
-
-
-/* This function is defined in the thread library.  */
-extern void __pthread_clock_settime (hp_timing_t offset)
-     __attribute__ ((__weak__));
-#endif
-
-
-/* Set CLOCK to value TP.  */
-int
-clock_settime (clockid_t clock_id, const struct timespec *tp)
-{
-  struct timeval tv;
-  int retval;
-
-  /* Make sure the time cvalue is OK.  */
-  if (tp->tv_nsec < 0 || tp->tv_nsec >= 1000000000)
-    {
-      __set_errno (EINVAL);
-      return -1;
-    }
-
-  switch (clock_id)
-    {
-    case CLOCK_REALTIME:
-      TIMESPEC_TO_TIMEVAL (&tv, tp);
-
-      retval = settimeofday (&tv, NULL);
-      break;
-
-#if HP_TIMING_AVAIL
-    case CLOCK_PROCESS_CPUTIME_ID:
-    case CLOCK_THREAD_CPUTIME_ID:
-      {
-	hp_timing_t tsc;
-	hp_timing_t usertime;
-
-	/* First thing is to get the current time.  */
-	HP_TIMING_NOW (tsc);
-
-	if (__builtin_expect (freq == 0, 0))
-	  {
-	    /* This can only happen if we haven't initialized the `freq'
-	       variable yet.  Do this now. We don't have to protect this
-	       code against multiple execution since all of them should
-	       lead to the same result.  */
-	    freq = __get_clockfreq ();
-	    if (__builtin_expect (freq == 0, 0))
-	      {
-		/* Something went wrong.  */
-		retval = -1;
-		break;
-	      }
-	  }
-
-	/* Convert the user-provided time into CPU ticks.  */
-	usertime = tp->tv_sec * freq + (tp->tv_nsec * freq) / 1000000000ull;
-
-	/* Determine the offset and use it as the new base value.  */
-	if (clock_id != CLOCK_THREAD_CPUTIME_ID
-	    || __pthread_clock_settime == NULL)
-	  _dl_cpuclock_offset = tsc - usertime;
-	else
-	  __pthread_clock_settime (tsc - usertime);
-
-	retval = 0;
-      }
-      break;
-#endif
-
-    default:
-      __set_errno (EINVAL);
-      retval = -1;
-      break;
-    }
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/cmath/Makefile.am b/newlib/libc/sys/linux/cmath/Makefile.am
deleted file mode 100644
index 6c47f2149..000000000
--- a/newlib/libc/sys/linux/cmath/Makefile.am
+++ /dev/null
@@ -1,28 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	s_cacos.c    s_casinf.c   s_catanh.c   s_ccosh.c   s_clog.c     s_cpowf.c   s_csinh.c   s_ctan.c \
-	s_cacosf.c   s_casinh.c   s_catanhf.c  s_ccoshf.c  s_clog10.c   s_csinhf.c  s_ctanf.c \
-	s_cacosh.c   s_casinhf.c  s_clog10f.c  s_cproj.c   s_ctanh.c \
-	s_cacoshf.c  s_cprojf.c  s_ctanhf.c \
-	s_cexp.c    s_clogf.c    s_csqrt.c  \
-	s_catan.c    s_ccos.c     s_cexpf.c   s_csin.c    s_csqrtf.c  \
-	s_casin.c    s_catanf.c   s_ccosf.c    s_cpow.c     s_csinf.c   
-
-libcmath_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libcmath.la
-libcmath_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
diff --git a/newlib/libc/sys/linux/cmath/Makefile.in b/newlib/libc/sys/linux/cmath/Makefile.in
deleted file mode 100644
index fee3d914d..000000000
--- a/newlib/libc/sys/linux/cmath/Makefile.in
+++ /dev/null
@@ -1,390 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	s_cacos.c    s_casinf.c   s_catanh.c   s_ccosh.c   s_clog.c     s_cpowf.c   s_csinh.c   s_ctan.c \
-	s_cacosf.c   s_casinh.c   s_catanhf.c  s_ccoshf.c  s_clog10.c   s_csinhf.c  s_ctanf.c \
-	s_cacosh.c   s_casinhf.c  s_clog10f.c  s_cproj.c   s_ctanh.c \
-	s_cacoshf.c  s_cprojf.c  s_ctanhf.c \
-	s_cexp.c    s_clogf.c    s_csqrt.c  \
-	s_catan.c    s_ccos.c     s_cexpf.c   s_csin.c    s_csqrtf.c  \
-	s_casin.c    s_catanf.c   s_ccosf.c    s_cpow.c     s_csinf.c   
-
-
-libcmath_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libcmath.la
-@USE_LIBTOOL_TRUE@libcmath_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  s_cacos.$(OBJEXT) s_casinf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_catanh.$(OBJEXT) s_ccosh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_clog.$(OBJEXT) s_cpowf.$(OBJEXT) s_csinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ctan.$(OBJEXT) s_cacosf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_casinh.$(OBJEXT) s_catanhf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ccoshf.$(OBJEXT) s_clog10.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_csinhf.$(OBJEXT) s_ctanf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_cacosh.$(OBJEXT) s_casinhf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_clog10f.$(OBJEXT) s_cproj.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ctanh.$(OBJEXT) s_cacoshf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_cprojf.$(OBJEXT) s_ctanhf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_cexp.$(OBJEXT) s_clogf.$(OBJEXT) s_csqrt.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_catan.$(OBJEXT) s_ccos.$(OBJEXT) s_cexpf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_csin.$(OBJEXT) s_csqrtf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_casin.$(OBJEXT) s_catanf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ccosf.$(OBJEXT) s_cpow.$(OBJEXT) s_csinf.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libcmath_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libcmath_la_OBJECTS =  s_cacos.lo s_casinf.lo \
-@USE_LIBTOOL_TRUE@s_catanh.lo s_ccosh.lo s_clog.lo s_cpowf.lo \
-@USE_LIBTOOL_TRUE@s_csinh.lo s_ctan.lo s_cacosf.lo s_casinh.lo \
-@USE_LIBTOOL_TRUE@s_catanhf.lo s_ccoshf.lo s_clog10.lo s_csinhf.lo \
-@USE_LIBTOOL_TRUE@s_ctanf.lo s_cacosh.lo s_casinhf.lo s_clog10f.lo \
-@USE_LIBTOOL_TRUE@s_cproj.lo s_ctanh.lo s_cacoshf.lo s_cprojf.lo \
-@USE_LIBTOOL_TRUE@s_ctanhf.lo s_cexp.lo s_clogf.lo s_csqrt.lo \
-@USE_LIBTOOL_TRUE@s_catan.lo s_ccos.lo s_cexpf.lo s_csin.lo s_csqrtf.lo \
-@USE_LIBTOOL_TRUE@s_casin.lo s_catanf.lo s_ccosf.lo s_cpow.lo \
-@USE_LIBTOOL_TRUE@s_csinf.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libcmath_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libcmath_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus cmath/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libcmath.la: $(libcmath_la_OBJECTS) $(libcmath_la_DEPENDENCIES)
-	$(LINK)  $(libcmath_la_LDFLAGS) $(libcmath_la_OBJECTS) $(libcmath_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = cmath
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/cmath/math_private.h b/newlib/libc/sys/linux/cmath/math_private.h
deleted file mode 100644
index 148376c44..000000000
--- a/newlib/libc/sys/linux/cmath/math_private.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-/*
- * from: @(#)fdlibm.h 5.1 93/09/24
- * $Id$
- */
-
-#ifndef _MATH_PRIVATE_H_
-#define _MATH_PRIVATE_H_
-
-#include <endian.h>
-#include <sys/types.h>
-#include <machine/weakalias.h>
-#include <machine/huge_val.h>
-
-#define INFINITY HUGE_VALF
-
-#define __nan nan
-#define __isnan isnan
-#define __isinf isinf
-#define __copysignf copysignf
-#define __copysign copysign
-#define __isnanf isnanf
-#define __isinff isinff
-#define __nanf nanf
-#define feraiseexcept(x) /* nothing */
-#define __sincos sincos
-#define __sincosf sincosf
-
-int __signbitd (double x);
-int __signbitf (float x);
-
-/* The original fdlibm code used statements like:
-	n0 = ((*(int*)&one)>>29)^1;		* index of high word *
-	ix0 = *(n0+(int*)&x);			* high word of x *
-	ix1 = *((1-n0)+(int*)&x);		* low word of x *
-   to dig two 32 bit words out of the 64 bit IEEE floating point
-   value.  That is non-ANSI, and, moreover, the gcc instruction
-   scheduler gets it wrong.  We instead use the following macros.
-   Unlike the original code, we determine the endianness at compile
-   time, not at run time; I don't see much benefit to selecting
-   endianness at run time.  */
-
-/* A union which permits us to convert between a double and two 32 bit
-   ints.  */
-
-#if __FLOAT_WORD_ORDER == BIG_ENDIAN
-
-typedef union
-{
-  double value;
-  struct
-  {
-    u_int32_t msw;
-    u_int32_t lsw;
-  } parts;
-} ieee_double_shape_type;
-
-#endif
-
-#if __FLOAT_WORD_ORDER == LITTLE_ENDIAN
-
-typedef union
-{
-  double value;
-  struct
-  {
-    u_int32_t lsw;
-    u_int32_t msw;
-  } parts;
-} ieee_double_shape_type;
-
-#endif
-
-/* Get two 32 bit ints from a double.  */
-
-#define EXTRACT_WORDS(ix0,ix1,d)				\
-do {								\
-  ieee_double_shape_type ew_u;					\
-  ew_u.value = (d);						\
-  (ix0) = ew_u.parts.msw;					\
-  (ix1) = ew_u.parts.lsw;					\
-} while (0)
-
-/* Get the more significant 32 bit int from a double.  */
-
-#define GET_HIGH_WORD(i,d)					\
-do {								\
-  ieee_double_shape_type gh_u;					\
-  gh_u.value = (d);						\
-  (i) = gh_u.parts.msw;						\
-} while (0)
-
-/* Get the less significant 32 bit int from a double.  */
-
-#define GET_LOW_WORD(i,d)					\
-do {								\
-  ieee_double_shape_type gl_u;					\
-  gl_u.value = (d);						\
-  (i) = gl_u.parts.lsw;						\
-} while (0)
-
-/* Set a double from two 32 bit ints.  */
-
-#define INSERT_WORDS(d,ix0,ix1)					\
-do {								\
-  ieee_double_shape_type iw_u;					\
-  iw_u.parts.msw = (ix0);					\
-  iw_u.parts.lsw = (ix1);					\
-  (d) = iw_u.value;						\
-} while (0)
-
-/* Set the more significant 32 bits of a double from an int.  */
-
-#define SET_HIGH_WORD(d,v)					\
-do {								\
-  ieee_double_shape_type sh_u;					\
-  sh_u.value = (d);						\
-  sh_u.parts.msw = (v);						\
-  (d) = sh_u.value;						\
-} while (0)
-
-/* Set the less significant 32 bits of a double from an int.  */
-
-#define SET_LOW_WORD(d,v)					\
-do {								\
-  ieee_double_shape_type sl_u;					\
-  sl_u.value = (d);						\
-  sl_u.parts.lsw = (v);						\
-  (d) = sl_u.value;						\
-} while (0)
-
-/* A union which permits us to convert between a float and a 32 bit
-   int.  */
-
-typedef union
-{
-  float value;
-  u_int32_t word;
-} ieee_float_shape_type;
-
-/* Get a 32 bit int from a float.  */
-
-#define GET_FLOAT_WORD(i,d)					\
-do {								\
-  ieee_float_shape_type gf_u;					\
-  gf_u.value = (d);						\
-  (i) = gf_u.word;						\
-} while (0)
-
-/* Set a float from a 32 bit int.  */
-
-#define SET_FLOAT_WORD(d,i)					\
-do {								\
-  ieee_float_shape_type sf_u;					\
-  sf_u.word = (i);						\
-  (d) = sf_u.value;						\
-} while (0)
-
-#if 0
-/* ieee style elementary functions */
-extern double __ieee754_sqrt (double);
-extern double __ieee754_acos (double);
-extern double __ieee754_acosh (double);
-extern double __ieee754_log (double);
-extern double __ieee754_atanh (double);
-extern double __ieee754_asin (double);
-extern double __ieee754_atan2 (double,double);
-extern double __ieee754_exp (double);
-extern double __ieee754_exp2 (double);
-extern double __ieee754_exp10 (double);
-extern double __ieee754_cosh (double);
-extern double __ieee754_fmod (double,double);
-extern double __ieee754_pow (double,double);
-extern double __ieee754_lgamma_r (double,int *);
-extern double __ieee754_gamma_r (double,int *);
-extern double __ieee754_lgamma (double);
-extern double __ieee754_gamma (double);
-extern double __ieee754_log10 (double);
-extern double __ieee754_log2 (double);
-extern double __ieee754_sinh (double);
-extern double __ieee754_hypot (double,double);
-extern double __ieee754_j0 (double);
-extern double __ieee754_j1 (double);
-extern double __ieee754_y0 (double);
-extern double __ieee754_y1 (double);
-extern double __ieee754_jn (int,double);
-extern double __ieee754_yn (int,double);
-extern double __ieee754_remainder (double,double);
-extern int32_t __ieee754_rem_pio2 (double,double*);
-extern double __ieee754_scalb (double,double);
-#endif
-
-/* This is necessary because the hardware accelerated version of libm
-   does not provide the __ieee754 functions. */
-#define __ieee754_sinh   sinh
-#define __ieee754_hypot  hypot
-#define __ieee754_hypotf hypotf
-#define __ieee754_logf   logf
-#define __ieee754_log10  log10
-#define __ieee754_exp    exp
-#define __ieee754_cosh   cosh
-#define __ieee754_expf   expf
-#define __ieee754_log10f log10f
-#define __ieee754_atan2  atan2
-#define __ieee754_sqrtf  sqrtf
-#define __ieee754_sinhf  sinhf
-#define __ieee754_log    log
-#define __ieee754_sqrt   sqrt
-#define __ieee754_coshf  coshf
-#define __ieee754_atan2f atan2f
-
-/* fdlibm kernel function */
-extern double __kernel_standard (double,double,int);
-extern double __kernel_sin (double,double,int);
-extern double __kernel_cos (double,double);
-extern double __kernel_tan (double,double,int);
-extern int    __kernel_rem_pio2 (double*,double*,int,int,int, const int32_t*);
-
-/* internal functions.  */
-extern double __copysign (double x, double __y);
-
-
-/* ieee style elementary float functions */
-extern float __ieee754_sqrtf (float);
-extern float __ieee754_acosf (float);
-extern float __ieee754_acoshf (float);
-extern float __ieee754_logf (float);
-extern float __ieee754_atanhf (float);
-extern float __ieee754_asinf (float);
-extern float __ieee754_atan2f (float,float);
-extern float __ieee754_expf (float);
-extern float __ieee754_exp2f (float);
-extern float __ieee754_exp10f (float);
-extern float __ieee754_coshf (float);
-extern float __ieee754_fmodf (float,float);
-extern float __ieee754_powf (float,float);
-extern float __ieee754_lgammaf_r (float,int *);
-extern float __ieee754_gammaf_r (float,int *);
-extern float __ieee754_lgammaf (float);
-extern float __ieee754_gammaf (float);
-extern float __ieee754_log10f (float);
-extern float __ieee754_log2f (float);
-extern float __ieee754_sinhf (float);
-extern float __ieee754_hypotf (float,float);
-extern float __ieee754_j0f (float);
-extern float __ieee754_j1f (float);
-extern float __ieee754_y0f (float);
-extern float __ieee754_y1f (float);
-extern float __ieee754_jnf (int,float);
-extern float __ieee754_ynf (int,float);
-extern float __ieee754_remainderf (float,float);
-extern int32_t __ieee754_rem_pio2f (float,float*);
-extern float __ieee754_scalbf (float,float);
-
-
-/* float versions of fdlibm kernel functions */
-extern float __kernel_sinf (float,float,int);
-extern float __kernel_cosf (float,float);
-extern float __kernel_tanf (float,float,int);
-extern int   __kernel_rem_pio2f (float*,float*,int,int,int, const int32_t*);
-
-
-/* ieee style elementary long double functions */
-extern long double __ieee754_sqrtl (long double);
-extern long double __ieee754_acosl (long double);
-extern long double __ieee754_acoshl (long double);
-extern long double __ieee754_logl (long double);
-extern long double __ieee754_atanhl (long double);
-extern long double __ieee754_asinl (long double);
-extern long double __ieee754_atan2l (long double,long double);
-extern long double __ieee754_expl (long double);
-extern long double __ieee754_exp2l (long double);
-extern long double __ieee754_exp10l (long double);
-extern long double __ieee754_coshl (long double);
-extern long double __ieee754_fmodl (long double,long double);
-extern long double __ieee754_powl (long double,long double);
-extern long double __ieee754_lgammal_r (long double,int *);
-extern long double __ieee754_gammal_r (long double,int *);
-extern long double __ieee754_lgammal (long double);
-extern long double __ieee754_gammal (long double);
-extern long double __ieee754_log10l (long double);
-extern long double __ieee754_log2l (long double);
-extern long double __ieee754_sinhl (long double);
-extern long double __ieee754_hypotl (long double,long double);
-extern long double __ieee754_j0l (long double);
-extern long double __ieee754_j1l (long double);
-extern long double __ieee754_y0l (long double);
-extern long double __ieee754_y1l (long double);
-extern long double __ieee754_jnl (int,long double);
-extern long double __ieee754_ynl (int,long double);
-extern long double __ieee754_remainderl (long double,long double);
-extern int   __ieee754_rem_pio2l (long double,long double*);
-extern long double __ieee754_scalbl (long double,long double);
-
-/* long double versions of fdlibm kernel functions */
-extern long double __kernel_sinl (long double,long double,int);
-extern long double __kernel_cosl (long double,long double);
-extern long double __kernel_tanl (long double,long double,int);
-extern void __kernel_sincosl (long double,long double,
-			      long double *,long double *, int);
-extern int   __kernel_rem_pio2l (long double*,long double*,int,int,
-				 int,const int*);
-
-#ifndef NO_LONG_DOUBLE
-/* prototypes required to compile the ldbl-96 support without warnings */
-extern int __finitel (long double);
-extern int __ilogbl (long double);
-extern int __isinfl (long double);
-extern int __isnanl (long double);
-extern long double __atanl (long double);
-extern long double __copysignl (long double, long double);
-extern long double __expm1l (long double);
-extern long double __floorl (long double);
-extern long double __frexpl (long double, int *);
-extern long double __ldexpl (long double, int);
-extern long double __log1pl (long double);
-extern long double __nanl (const char *);
-extern long double __rintl (long double);
-extern long double __scalbnl (long double, int);
-extern long double __sqrtl (long double x);
-extern long double fabsl (long double x);
-extern void __sincosl (long double, long double *, long double *);
-extern long double __logbl (long double x);
-extern long double __significandl (long double x);
-#endif
-
-/* Prototypes for functions of the IBM Accurate Mathematical Library.  */
-extern double __exp1 (double __x, double __xx, double __error);
-extern double __sin (double __x);
-extern double __cos (double __x);
-extern int __branred (double __x, double *__a, double *__aa);
-extern void __doasin (double __x, double __dx, double __v[]);
-extern void __dubsin (double __x, double __dx, double __v[]);
-extern void __dubcos (double __x, double __dx, double __v[]);
-extern double __halfulp (double __x, double __y);
-extern double __sin32 (double __x, double __res, double __res1);
-extern double __cos32 (double __x, double __res, double __res1);
-extern double __mpsin (double __x, double __dx);
-extern double __mpcos (double __x, double __dx);
-extern double __mpsin1 (double __x);
-extern double __mpcos1 (double __x);
-extern double __slowexp (double __x);
-extern double __slowpow (double __x, double __y, double __z);
-extern void __docos (double __x, double __dx, double __v[]);
-
-#endif /* _MATH_PRIVATE_H_ */
diff --git a/newlib/libc/sys/linux/cmath/s_cacos.c b/newlib/libc/sys/linux/cmath/s_cacos.c
deleted file mode 100644
index f9864472b..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacos.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Return cosine of complex double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__cacos (__complex__ double x)
-{
-  __complex__ double y;
-  __complex__ double res;
-
-  y = __casin (x);
-
-  __real__ res = (double) M_PI_2 - __real__ y;
-  __imag__ res = -__imag__ y;
-
-  return res;
-}
-weak_alias (__cacos, cacos)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__cacos, __cacosl)
-weak_alias (__cacos, cacosl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_cacosf.c b/newlib/libc/sys/linux/cmath/s_cacosf.c
deleted file mode 100644
index bf01890ad..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacosf.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Return cosine of complex float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__cacosf (__complex__ float x)
-{
-  __complex__ float y;
-  __complex__ float res;
-
-  y = __casinf (x);
-
-  __real__ res = (float) M_PI_2 - __real__ y;
-  __imag__ res = -__imag__ y;
-
-  return res;
-}
-weak_alias (__cacosf, cacosf)
diff --git a/newlib/libc/sys/linux/cmath/s_cacosh.c b/newlib/libc/sys/linux/cmath/s_cacosh.c
deleted file mode 100644
index 6ca3426b5..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacosh.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Return arc hyperbole cosine for double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__cacosh (__complex__ double x)
-{
-  __complex__ double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VAL;
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nan ("");
-	  else
-	    __imag__ res = __copysign ((rcls == FP_INFINITE
-					? (__real__ x < 0.0
-					   ? M_PI - M_PI_4 : M_PI_4)
-					: M_PI_2), __imag__ x);
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VAL;
-
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysign (signbit (__real__ x) ? M_PI : 0.0,
-				       __imag__ x);
-	  else
-	    __imag__ res = __nan ("");
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      __real__ res = 0.0;
-      __imag__ res = __copysign (M_PI_2, __imag__ x);
-    }
-  else
-    {
-      __complex__ double y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) - 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrt (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clog (y);
-    }
-
-  return res;
-}
-weak_alias (__cacosh, cacosh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__cacosh, __cacoshl)
-weak_alias (__cacosh, cacoshl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_cacoshf.c b/newlib/libc/sys/linux/cmath/s_cacoshf.c
deleted file mode 100644
index 69054cde3..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacoshf.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Return arc hyperbole cosine for float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__cacoshf (__complex__ float x)
-{
-  __complex__ float res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALF;
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nanf ("");
-	  else
-	    __imag__ res = __copysignf ((rcls == FP_INFINITE
-					 ? (__real__ x < 0.0
-					    ? M_PI - M_PI_4 : M_PI_4)
-					 : M_PI_2), __imag__ x);
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALF;
-
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysignf (signbit (__real__ x) ? M_PI : 0.0,
-					__imag__ x);
-	  else
-	    __imag__ res = __nanf ("");
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      __real__ res = 0.0;
-      __imag__ res = __copysignf (M_PI_2, __imag__ x);
-    }
-  else
-    {
-#if 1
-      __complex__ float y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) - 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrtf (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clogf (y);
-#else
-      float re2 = __real__ x * __real__ x;
-      float im2 = __imag__ x * __imag__ x;
-      float sq = re2 - im2 - 1.0;
-      float ro = __ieee754_sqrtf (sq * sq + 4 * re2 * im2);
-      float a = __ieee754_sqrtf ((sq + ro) / 2.0);
-      float b = __ieee754_sqrtf ((-sq + ro) / 2.0);
-
-      __real__ res = 0.5 * __ieee754_logf (re2 + __real__ x * 2 * a
-					   + im2 + __imag__ x * 2 * b
-					   + ro);
-      __imag__ res = __ieee754_atan2f (__imag__ x + b, __real__ x + a);
-#endif
-    }
-
-  return res;
-}
-weak_alias (__cacoshf, cacoshf)
diff --git a/newlib/libc/sys/linux/cmath/s_cacoshl.c b/newlib/libc/sys/linux/cmath/s_cacoshl.c
deleted file mode 100644
index 3d0cd7f2a..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacoshl.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Return arc hyperbole cosine for long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ long double
-__cacoshl (__complex__ long double x)
-{
-  __complex__ long double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALL;
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nanl ("");
-	  else
-	    __imag__ res = __copysignl ((rcls == FP_INFINITE
-					 ? (__real__ x < 0.0
-					    ? M_PIl - M_PI_4l : M_PI_4l)
-					 : M_PI_2l), __imag__ x);
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALL;
-
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysignl (signbit (__real__ x) ? M_PIl : 0.0,
-					__imag__ x);
-	  else
-	    __imag__ res = __nanl ("");
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      __real__ res = 0.0;
-      __imag__ res = __copysignl (M_PI_2l, __imag__ x);
-    }
-  else
-    {
-      __complex__ long double y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) - 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrtl (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clogl (y);
-    }
-
-  return res;
-}
-weak_alias (__cacoshl, cacoshl)
diff --git a/newlib/libc/sys/linux/cmath/s_cacosl.c b/newlib/libc/sys/linux/cmath/s_cacosl.c
deleted file mode 100644
index d4bbfec87..000000000
--- a/newlib/libc/sys/linux/cmath/s_cacosl.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Return cosine of complex long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ long double
-__cacosl (__complex__ long double x)
-{
-  __complex__ long double y;
-  __complex__ long double res;
-
-  y = __casinl (x);
-
-  __real__ res = M_PI_2l - __real__ y;
-  __imag__ res = -__imag__ y;
-
-  return res;
-}
-weak_alias (__cacosl, cacosl)
diff --git a/newlib/libc/sys/linux/cmath/s_casin.c b/newlib/libc/sys/linux/cmath/s_casin.c
deleted file mode 100644
index 4c164b534..000000000
--- a/newlib/libc/sys/linux/cmath/s_casin.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Return arc sine of complex double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__casin (__complex__ double x)
-{
-  __complex__ double res;
-
-  if (isnan (__real__ x) || isnan (__imag__ x))
-    {
-      if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else if (__isinf (__real__ x) || __isinf (__imag__ x))
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __copysign (HUGE_VAL, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else
-    {
-      __complex__ double y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      y = __casinh (y);
-
-      __real__ res = __imag__ y;
-      __imag__ res = -__real__ y;
-    }
-
-  return res;
-}
-weak_alias (__casin, casin)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__casin, __casinl)
-weak_alias (__casin, casinl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_casinf.c b/newlib/libc/sys/linux/cmath/s_casinf.c
deleted file mode 100644
index 09e52b400..000000000
--- a/newlib/libc/sys/linux/cmath/s_casinf.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* Return arc sine of complex float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-
-__complex__ float
-__casinf (__complex__ float x)
-{
-  __complex__ float res;
-
-  if (isnan (__real__ x) || isnan (__imag__ x))
-    {
-      if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else if (__isinff (__real__ x) || __isinff (__imag__ x))
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __copysignf (HUGE_VALF, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else
-    {
-      __complex__ float y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      y = __casinhf (y);
-
-      __real__ res = __imag__ y;
-      __imag__ res = -__real__ y;
-    }
-
-  return res;
-}
-weak_alias (__casinf, casinf)
diff --git a/newlib/libc/sys/linux/cmath/s_casinh.c b/newlib/libc/sys/linux/cmath/s_casinh.c
deleted file mode 100644
index 30b9dbb18..000000000
--- a/newlib/libc/sys/linux/cmath/s_casinh.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Return arc hyperbole sine for double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__casinh (__complex__ double x)
-{
-  __complex__ double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysign (HUGE_VAL, __real__ x);
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nan ("");
-	  else
-	    __imag__ res = __copysign (rcls >= FP_ZERO ? M_PI_2 : M_PI_4,
-				       __imag__ x);
-	}
-      else if (rcls <= FP_INFINITE)
-	{
-	  __real__ res = __real__ x;
-	  if ((rcls == FP_INFINITE && icls >= FP_ZERO)
-	      || (rcls == FP_NAN && icls == FP_ZERO))
-	    __imag__ res = __copysign (0.0, __imag__ x);
-	  else
-	    __imag__ res = __nan ("");
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      __complex__ double y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) + 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrt (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clog (y);
-    }
-
-  return res;
-}
-weak_alias (__casinh, casinh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__casinh, __casinhl)
-weak_alias (__casinh, casinhl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_casinhf.c b/newlib/libc/sys/linux/cmath/s_casinhf.c
deleted file mode 100644
index f9fc4e73c..000000000
--- a/newlib/libc/sys/linux/cmath/s_casinhf.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Return arc hyperbole sine for float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__casinhf (__complex__ float x)
-{
-  __complex__ float res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysignf (HUGE_VALF, __real__ x);
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nanf ("");
-	  else
-	    __imag__ res = __copysignf (rcls >= FP_ZERO ? M_PI_2 : M_PI_4,
-					__imag__ x);
-	}
-      else if (rcls <= FP_INFINITE)
-	{
-	  __real__ res = __real__ x;
-	  if ((rcls == FP_INFINITE && icls >= FP_ZERO)
-	      || (rcls == FP_NAN && icls == FP_ZERO))
-	    __imag__ res = __copysignf (0.0, __imag__ x);
-	  else
-	    __imag__ res = __nanf ("");
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      __complex__ float y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) + 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrtf (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clogf (y);
-    }
-
-  return res;
-}
-weak_alias (__casinhf, casinhf)
diff --git a/newlib/libc/sys/linux/cmath/s_casinhl.c b/newlib/libc/sys/linux/cmath/s_casinhl.c
deleted file mode 100644
index b48c60932..000000000
--- a/newlib/libc/sys/linux/cmath/s_casinhl.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Return arc hyperbole sine for long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ long double
-__casinhl (__complex__ long double x)
-{
-  __complex__ long double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysignl (HUGE_VALL, __real__ x);
-
-	  if (rcls == FP_NAN)
-	    __imag__ res = __nanl ("");
-	  else
-	    __imag__ res = __copysignl (rcls >= FP_ZERO ? M_PI_2l : M_PI_4l,
-					__imag__ x);
-	}
-      else if (rcls <= FP_INFINITE)
-	{
-	  __real__ res = __real__ x;
-	  if ((rcls == FP_INFINITE && icls >= FP_ZERO)
-	      || (rcls == FP_NAN && icls == FP_ZERO))
-	    __imag__ res = __copysignl (0.0, __imag__ x);
-	  else
-	    __imag__ res = __nanl ("");
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      __complex__ long double y;
-
-      __real__ y = (__real__ x - __imag__ x) * (__real__ x + __imag__ x) + 1.0;
-      __imag__ y = 2.0 * __real__ x * __imag__ x;
-
-      y = __csqrtl (y);
-
-      __real__ y += __real__ x;
-      __imag__ y += __imag__ x;
-
-      res = __clogl (y);
-    }
-
-  return res;
-}
-weak_alias (__casinhl, casinhl)
diff --git a/newlib/libc/sys/linux/cmath/s_casinl.c b/newlib/libc/sys/linux/cmath/s_casinl.c
deleted file mode 100644
index d6b7a8087..000000000
--- a/newlib/libc/sys/linux/cmath/s_casinl.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Return arc sine of complex long double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ long double
-__casinl (__complex__ long double x)
-{
-  __complex__ long double res;
-
-  if (isnan (__real__ x) || isnan (__imag__ x))
-    {
-      if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else if (__isinfl (__real__ x) || __isinfl (__imag__ x))
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __copysignl (HUGE_VALL, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else
-    {
-      __complex__ long double y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      y = __casinhl (y);
-
-      __real__ res = __imag__ y;
-      __imag__ res = -__real__ y;
-    }
-
-  return res;
-}
-weak_alias (__casinl, casinl)
diff --git a/newlib/libc/sys/linux/cmath/s_catan.c b/newlib/libc/sys/linux/cmath/s_catan.c
deleted file mode 100644
index 1d0673ad6..000000000
--- a/newlib/libc/sys/linux/cmath/s_catan.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* Return arc tangent of complex double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__catan (__complex__ double x)
-{
-  __complex__ double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (rcls == FP_INFINITE)
-	{
-	  __real__ res = __copysign (M_PI_2, __real__ x);
-	  __imag__ res = __copysign (0.0, __imag__ x);
-	}
-      else if (icls == FP_INFINITE)
-	{
-	  if (rcls >= FP_ZERO)
-	    __real__ res = __copysign (M_PI_2, __real__ x);
-	  else
-	    __real__ res = __nan ("");
-	  __imag__ res = __copysign (0.0, __imag__ x);
-	}
-      else if (icls == FP_ZERO || icls == FP_INFINITE)
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __copysign (0.0, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      double r2, num, den;
-
-      r2 = __real__ x * __real__ x;
-
-      den = 1 - r2 - __imag__ x * __imag__ x;
-
-      __real__ res = 0.5 * __ieee754_atan2 (2.0 * __real__ x, den);
-
-      num = __imag__ x + 1.0;
-      num = r2 + num * num;
-
-      den = __imag__ x - 1.0;
-      den = r2 + den * den;
-
-      __imag__ res = 0.25 * __ieee754_log (num / den);
-    }
-
-  return res;
-}
-weak_alias (__catan, catan)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__catan, __catanl)
-weak_alias (__catan, catanl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_catanf.c b/newlib/libc/sys/linux/cmath/s_catanf.c
deleted file mode 100644
index cc9e5ea7a..000000000
--- a/newlib/libc/sys/linux/cmath/s_catanf.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Return arc tangent of complex float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__catanf (__complex__ float x)
-{
-  __complex__ float res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (rcls == FP_INFINITE)
-	{
-	  __real__ res = __copysignf (M_PI_2, __real__ x);
-	  __imag__ res = __copysignf (0.0, __imag__ x);
-	}
-      else if (icls == FP_INFINITE)
-	{
-	  if (rcls >= FP_ZERO)
-	    __real__ res = __copysignf (M_PI_2, __real__ x);
-	  else
-	    __real__ res = __nanf ("");
-	  __imag__ res = __copysignf (0.0, __imag__ x);
-	}
-      else if (icls == FP_ZERO || icls == FP_INFINITE)
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __copysignf (0.0, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      float r2, num, den;
-
-      r2 = __real__ x * __real__ x;
-
-      den = 1 - r2 - __imag__ x * __imag__ x;
-
-      __real__ res = 0.5 * __ieee754_atan2f (2.0 * __real__ x, den);
-
-      num = __imag__ x + 1.0;
-      num = r2 + num * num;
-
-      den = __imag__ x - 1.0;
-      den = r2 + den * den;
-
-      __imag__ res = 0.25 * __ieee754_logf (num / den);
-    }
-
-  return res;
-}
-weak_alias (__catanf, catanf)
diff --git a/newlib/libc/sys/linux/cmath/s_catanh.c b/newlib/libc/sys/linux/cmath/s_catanh.c
deleted file mode 100644
index e15c073f9..000000000
--- a/newlib/libc/sys/linux/cmath/s_catanh.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Return arc hyperbole tangent for double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__catanh (__complex__ double x)
-{
-  __complex__ double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysign (0.0, __real__ x);
-	  __imag__ res = __copysign (M_PI_2, __imag__ x);
-	}
-      else if (rcls == FP_INFINITE || rcls == FP_ZERO)
-	{
-	  __real__ res = __copysign (0.0, __real__ x);
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysign (M_PI_2, __imag__ x);
-	  else
-	    __imag__ res = __nan ("");
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      double i2, num, den;
-
-      i2 = __imag__ x * __imag__ x;
-
-      num = 1.0 + __real__ x;
-      num = i2 + num * num;
-
-      den = 1.0 - __real__ x;
-      den = i2 + den * den;
-
-      __real__ res = 0.25 * (__ieee754_log (num) - __ieee754_log (den));
-
-      den = 1 - __real__ x * __real__ x - i2;
-
-      __imag__ res = 0.5 * __ieee754_atan2 (2.0 * __imag__ x, den);
-    }
-
-  return res;
-}
-weak_alias (__catanh, catanh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__catanh, __catanhl)
-weak_alias (__catanh, catanhl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_catanhf.c b/newlib/libc/sys/linux/cmath/s_catanhf.c
deleted file mode 100644
index 30a5a1b8a..000000000
--- a/newlib/libc/sys/linux/cmath/s_catanhf.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Return arc hyperbole tangent for float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__catanhf (__complex__ float x)
-{
-  __complex__ float res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysignf (0.0, __real__ x);
-	  __imag__ res = __copysignf (M_PI_2, __imag__ x);
-	}
-      else if (rcls == FP_INFINITE || rcls == FP_ZERO)
-	{
-	  __real__ res = __copysignf (0.0, __real__ x);
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysignf (M_PI_2, __imag__ x);
-	  else
-	    __imag__ res = __nanf ("");
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      float i2, num, den;
-
-      i2 = __imag__ x * __imag__ x;
-
-      num = 1.0 + __real__ x;
-      num = i2 + num * num;
-
-      den = 1.0 - __real__ x;
-      den = i2 + den * den;
-
-      __real__ res = 0.25 * (__ieee754_logf (num) - __ieee754_logf (den));
-
-      den = 1 - __real__ x * __real__ x - i2;
-
-      __imag__ res = 0.5 * __ieee754_atan2f (2.0 * __imag__ x, den);
-    }
-
-  return res;
-}
-weak_alias (__catanhf, catanhf)
diff --git a/newlib/libc/sys/linux/cmath/s_catanhl.c b/newlib/libc/sys/linux/cmath/s_catanhl.c
deleted file mode 100644
index c3fb0ce5f..000000000
--- a/newlib/libc/sys/linux/cmath/s_catanhl.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Return arc hyperbole tangent for long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__catanhl (__complex__ long double x)
-{
-  __complex__ long double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = __copysignl (0.0, __real__ x);
-	  __imag__ res = __copysignl (M_PI_2l, __imag__ x);
-	}
-      else if (rcls == FP_INFINITE || rcls == FP_ZERO)
-	{
-	  __real__ res = __copysignl (0.0, __real__ x);
-	  if (icls >= FP_ZERO)
-	    __imag__ res = __copysignl (M_PI_2l, __imag__ x);
-	  else
-	    __imag__ res = __nanl ("");
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      long double i2, num, den;
-
-      i2 = __imag__ x * __imag__ x;
-
-      num = 1.0 + __real__ x;
-      num = i2 + num * num;
-
-      den = 1.0 - __real__ x;
-      den = i2 + den * den;
-
-      __real__ res = 0.25 * (__ieee754_logl (num) - __ieee754_logl (den));
-
-      den = 1 - __real__ x * __real__ x - i2;
-
-      __imag__ res = 0.5 * __ieee754_atan2l (2.0 * __imag__ x, den);
-    }
-
-  return res;
-}
-weak_alias (__catanhl, catanhl)
diff --git a/newlib/libc/sys/linux/cmath/s_catanl.c b/newlib/libc/sys/linux/cmath/s_catanl.c
deleted file mode 100644
index 6cb45e5be..000000000
--- a/newlib/libc/sys/linux/cmath/s_catanl.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Return arc tangent of complex long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__catanl (__complex__ long double x)
-{
-  __complex__ long double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (rcls == FP_INFINITE)
-	{
-	  __real__ res = __copysignl (M_PI_2l, __real__ x);
-	  __imag__ res = __copysignl (0.0, __imag__ x);
-	}
-      else if (icls == FP_INFINITE)
-	{
-	  if (rcls >= FP_ZERO)
-	    __real__ res = __copysignl (M_PI_2l, __real__ x);
-	  else
-	    __real__ res = __nanl ("");
-	  __imag__ res = __copysignl (0.0, __imag__ x);
-	}
-      else if (icls == FP_ZERO || icls == FP_INFINITE)
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __copysignl (0.0, __imag__ x);
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      res = x;
-    }
-  else
-    {
-      long double r2, num, den;
-
-      r2 = __real__ x * __real__ x;
-
-      den = 1 - r2 - __imag__ x * __imag__ x;
-
-      __real__ res = 0.5 * __ieee754_atan2l (2.0 * __real__ x, den);
-
-      num = __imag__ x + 1.0;
-      num = r2 + num * num;
-
-      den = __imag__ x - 1.0;
-      den = r2 + den * den;
-
-      __imag__ res = 0.25 * __ieee754_logl (num / den);
-    }
-
-  return res;
-}
-weak_alias (__catanl, catanl)
diff --git a/newlib/libc/sys/linux/cmath/s_cbrtl.c b/newlib/libc/sys/linux/cmath/s_cbrtl.c
deleted file mode 100644
index d668e377a..000000000
--- a/newlib/libc/sys/linux/cmath/s_cbrtl.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <math.h>
-#include <stdio.h>
-#include <errno.h>
-
-long double
-__cbrtl(long double x)
-{
-  fputs ("__cbrtl not implemented\n", stderr);
-  __set_errno (ENOSYS);
-  return 0.0;
-}
-
-weak_alias (__cbrtl, cbrtl)
-stub_warning (cbrtl)
-#include <stub-tag.h>
diff --git a/newlib/libc/sys/linux/cmath/s_ccos.c b/newlib/libc/sys/linux/cmath/s_ccos.c
deleted file mode 100644
index e65ea38a5..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccos.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Return cosine of complex double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__ccos (__complex__ double x)
-{
-  __complex__ double res;
-
-  if (!isfinite (__real__ x) || __isnan (__imag__ x))
-    {
-      if (__real__ x == 0.0 || __imag__ x == 0.0)
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = 0.0;
-
-#ifdef FE_INVALID
-	  if (__isinf (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else if (__isinf (__imag__ x))
-	{
-	  __real__ res = HUGE_VAL;
-	  __imag__ res = __nan ("");
-
-#ifdef FE_INVALID
-	  if (__isinf (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-
-#ifdef FE_INVALID
-	  if (isfinite (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __complex__ double y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      res = __ccosh (y);
-    }
-
-  return res;
-}
-weak_alias (__ccos, ccos)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__ccos, __ccosl)
-weak_alias (__ccos, ccosl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_ccosf.c b/newlib/libc/sys/linux/cmath/s_ccosf.c
deleted file mode 100644
index 016d8062b..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccosf.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Return cosine of complex float value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__ccosf (__complex__ float x)
-{
-  __complex__ float res;
-
-  if (!isfinite (__real__ x) || __isnanf (__imag__ x))
-    {
-      if (__real__ x == 0.0 || __imag__ x == 0.0)
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = 0.0;
-
-#ifdef FE_INVALID
-	  if (__isinff (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else if (__isinff (__imag__ x))
-	{
-	  __real__ res = HUGE_VALF;
-	  __imag__ res = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (__isinff (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (isfinite (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __complex__ float y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      res = __ccoshf (y);
-    }
-
-  return res;
-}
-weak_alias (__ccosf, ccosf)
diff --git a/newlib/libc/sys/linux/cmath/s_ccosh.c b/newlib/libc/sys/linux/cmath/s_ccosh.c
deleted file mode 100644
index f5b29db24..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccosh.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* Complex cosine hyperbole function for double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__ccosh (__complex__ double x)
-{
-  __complex__ double retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double sinh_val = __ieee754_sinh (__real__ x);
-	  double cosh_val = __ieee754_cosh (__real__ x);
-	  double sinix, cosix;
-
-	  __sincos (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * cosix;
-	  __imag__ retval = sinh_val * sinix;
-	}
-      else
-	{
-	  __imag__ retval = __real__ x == 0.0 ? 0.0 : __nan ("");
-	  __real__ retval = __nan ("") + __nan ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = HUGE_VAL;
-	  __imag__ retval = __imag__ x * __copysign (1.0, __real__ x);
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double sinix, cosix;
-
-	  __sincos (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysign (HUGE_VAL, cosix);
-	  __imag__ retval = (__copysign (HUGE_VAL, sinix)
-			     * __copysign (1.0, __real__ x));
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VAL;
-	  __imag__ retval = __nan ("") + __nan ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nan ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nan ("");
-    }
-
-  return retval;
-}
-weak_alias (__ccosh, ccosh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__ccosh, __ccoshl)
-weak_alias (__ccosh, ccoshl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_ccoshf.c b/newlib/libc/sys/linux/cmath/s_ccoshf.c
deleted file mode 100644
index 339b6bc1c..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccoshf.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Complex cosine hyperbole function for float.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__ccoshf (__complex__ float x)
-{
-  __complex__ float retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float sinh_val = __ieee754_sinhf (__real__ x);
-	  float cosh_val = __ieee754_coshf (__real__ x);
-	  float sinix, cosix;
-
-	  __sincosf (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * cosix;
-	  __imag__ retval = sinh_val * sinix;
-	}
-      else
-	{
-	  __imag__ retval = __real__ x == 0.0 ? 0.0 : __nanf ("");
-	  __real__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = HUGE_VALF;
-	  __imag__ retval = __imag__ x * __copysignf (1.0, __real__ x);
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float sinix, cosix;
-
-	  __sincosf (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignf (HUGE_VALF, cosix);
-	  __imag__ retval = (__copysignf (HUGE_VALF, sinix)
-			     * __copysignf (1.0, __real__ x));
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VALF;
-	  __imag__ retval = __nanf ("") + __nanf ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nanf ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nanf ("");
-    }
-
-  return retval;
-}
-weak_alias (__ccoshf, ccoshf)
diff --git a/newlib/libc/sys/linux/cmath/s_ccoshl.c b/newlib/libc/sys/linux/cmath/s_ccoshl.c
deleted file mode 100644
index 61ffb49ca..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccoshl.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Complex cosine hyperbole function for long double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__ccoshl (__complex__ long double x)
-{
-  __complex__ long double retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double sinh_val = __ieee754_sinhl (__real__ x);
-	  long double cosh_val = __ieee754_coshl (__real__ x);
-	  long double sinix, cosix;
-
-	  __sincosl (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * cosix;
-	  __imag__ retval = sinh_val * sinix;
-	}
-      else
-	{
-	  __imag__ retval = __real__ x == 0.0 ? 0.0 : __nanl ("");
-	  __real__ retval = __nanl ("") + __nanl ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = HUGE_VALL;
-	  __imag__ retval = __imag__ x * __copysignl (1.0, __real__ x);
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double sinix, cosix;
-
-	  __sincosl (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignl (HUGE_VALL, cosix);
-	  __imag__ retval = (__copysignl (HUGE_VALL, sinix)
-			     * __copysignl (1.0, __real__ x));
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VALL;
-	  __imag__ retval = __nanl ("") + __nanl ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nanl ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nanl ("");
-    }
-
-  return retval;
-}
-weak_alias (__ccoshl, ccoshl)
diff --git a/newlib/libc/sys/linux/cmath/s_ccosl.c b/newlib/libc/sys/linux/cmath/s_ccosl.c
deleted file mode 100644
index 4ebe2c347..000000000
--- a/newlib/libc/sys/linux/cmath/s_ccosl.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Return cosine of complex long double value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-
-__complex__ long double
-__ccosl (__complex__ long double x)
-{
-  __complex__ long double res;
-
-  if (!isfinite (__real__ x) || __isnanl (__imag__ x))
-    {
-      if (__real__ x == 0.0 || __imag__ x == 0.0)
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = 0.0;
-
-#ifdef FE_INVALID
-	  if (__isinfl (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else if (__isinfl (__imag__ x))
-	{
-	  __real__ res = HUGE_VALL;
-	  __imag__ res = __nanl ("");
-
-#ifdef FE_INVALID
-	  if (__isinfl (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-
-#ifdef FE_INVALID
-	  if (isfinite (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __complex__ long double y;
-
-      __real__ y = -__imag__ x;
-      __imag__ y = __real__ x;
-
-      res = __ccoshl (y);
-    }
-
-  return res;
-}
-weak_alias (__ccosl, ccosl)
diff --git a/newlib/libc/sys/linux/cmath/s_cexp.c b/newlib/libc/sys/linux/cmath/s_cexp.c
deleted file mode 100644
index 5a299b768..000000000
--- a/newlib/libc/sys/linux/cmath/s_cexp.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Return value of complex exponential function for double complex value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__cexp (__complex__ double x)
-{
-  __complex__ double retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double exp_val = __ieee754_exp (__real__ x);
-	  double sinix, cosix;
-
-	  __sincos (__imag__ x, &sinix, &cosix);
-
-	  if (isfinite (exp_val))
-	    {
-	      __real__ retval = exp_val * cosix;
-	      __imag__ retval = exp_val * sinix;
-	    }
-	  else
-	    {
-	      __real__ retval = __copysign (exp_val, cosix);
-	      __imag__ retval = __copysign (exp_val, sinix);
-	    }
-	}
-      else
-	{
-	  /* If the imaginary part is +-inf or NaN and the real part
-	     is not +-inf the result is NaN + iNaN.  */
-	  __real__ retval = __nan ("");
-	  __imag__ retval = __nan ("");
-
-#ifdef FE_INVALID
-	  feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double value = signbit (__real__ x) ? 0.0 : HUGE_VAL;
-
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = value;
-	      __imag__ retval = __imag__ x;
-	    }
-	  else
-	    {
-	      double sinix, cosix;
-
-	      __sincos (__imag__ x, &sinix, &cosix);
-
-	      __real__ retval = __copysign (value, cosix);
-	      __imag__ retval = __copysign (value, sinix);
-	    }
-	}
-      else if (signbit (__real__ x) == 0)
-	{
-	  __real__ retval = HUGE_VAL;
-	  __imag__ retval = __nan ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ retval = 0.0;
-	  __imag__ retval = __copysign (0.0, __imag__ x);
-	}
-    }
-  else
-    {
-      /* If the real part is NaN the result is NaN + iNaN.  */
-      __real__ retval = __nan ("");
-      __imag__ retval = __nan ("");
-
-#ifdef FE_INVALID
-      if (rcls != FP_NAN || icls != FP_NAN)
-	feraiseexcept (FE_INVALID);
-#endif
-    }
-
-  return retval;
-}
-weak_alias (__cexp, cexp)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__cexp, __cexpl)
-weak_alias (__cexp, cexpl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_cexpf.c b/newlib/libc/sys/linux/cmath/s_cexpf.c
deleted file mode 100644
index 93bfe2049..000000000
--- a/newlib/libc/sys/linux/cmath/s_cexpf.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Return value of complex exponential function for float complex value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__cexpf (__complex__ float x)
-{
-  __complex__ float retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float exp_val = __ieee754_expf (__real__ x);
-	  float sinix, cosix;
-
-	  __sincosf (__imag__ x, &sinix, &cosix);
-
-	  if (isfinite (exp_val))
-	    {
-	      __real__ retval = exp_val * cosix;
-	      __imag__ retval = exp_val * sinix;
-	    }
-	  else
-	    {
-	      __real__ retval = __copysignf (exp_val, cosix);
-	      __imag__ retval = __copysignf (exp_val, sinix);
-	    }
-	}
-      else
-	{
-	  /* If the imaginary part is +-inf or NaN and the real part
-	     is not +-inf the result is NaN + iNaN.  */
-	  __real__ retval = __nanf ("");
-	  __imag__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-	  feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float value = signbit (__real__ x) ? 0.0 : HUGE_VALF;
-
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = value;
-	      __imag__ retval = __imag__ x;
-	    }
-	  else
-	    {
-	      float sinix, cosix;
-
-	      __sincosf (__imag__ x, &sinix, &cosix);
-
-	      __real__ retval = __copysignf (value, cosix);
-	      __imag__ retval = __copysignf (value, sinix);
-	    }
-	}
-      else if (signbit (__real__ x) == 0)
-	{
-	  __real__ retval = HUGE_VALF;
-	  __imag__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ retval = 0.0;
-	  __imag__ retval = __copysignf (0.0, __imag__ x);
-	}
-    }
-  else
-    {
-      /* If the real part is NaN the result is NaN + iNaN.  */
-      __real__ retval = __nanf ("");
-      __imag__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-      if (rcls != FP_NAN || icls != FP_NAN)
-	feraiseexcept (FE_INVALID);
-#endif
-    }
-
-  return retval;
-}
-weak_alias (__cexpf, cexpf)
diff --git a/newlib/libc/sys/linux/cmath/s_cexpl.c b/newlib/libc/sys/linux/cmath/s_cexpl.c
deleted file mode 100644
index cf6bc974a..000000000
--- a/newlib/libc/sys/linux/cmath/s_cexpl.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Return value of complex exponential function for long double complex value.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__cexpl (__complex__ long double x)
-{
-  __complex__ long double retval;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double exp_val = __ieee754_expl (__real__ x);
-	  long double sinix, cosix;
-
-	  __sincosl (__imag__ x, &sinix, &cosix);
-
-	  if (isfinite (exp_val))
-	    {
-	      __real__ retval = exp_val * cosix;
-	      __imag__ retval = exp_val * sinix;
-	    }
-	  else
-	    {
-	      __real__ retval = __copysignl (exp_val, cosix);
-	      __imag__ retval = __copysignl (exp_val, sinix);
-	    }
-	}
-      else
-	{
-	  /* If the imaginary part is +-inf or NaN and the real part
-	     is not +-inf the result is NaN + iNaN.  */
-	  __real__ retval = __nanl ("");
-	  __imag__ retval = __nanl ("");
-
-#ifdef FE_INVALID
-	  feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double value = signbit (__real__ x) ? 0.0 : HUGE_VALL;
-
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = value;
-	      __imag__ retval = __imag__ x;
-	    }
-	  else
-	    {
-	      long double sinix, cosix;
-
-	      __sincosl (__imag__ x, &sinix, &cosix);
-
-	      __real__ retval = __copysignl (value, cosix);
-	      __imag__ retval = __copysignl (value, sinix);
-	    }
-	}
-      else if (signbit (__real__ x) == 0)
-	{
-	  __real__ retval = HUGE_VALL;
-	  __imag__ retval = __nanl ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-      else
-	{
-	  __real__ retval = 0.0;
-	  __imag__ retval = __copysignl (0.0, __imag__ x);
-	}
-    }
-  else
-    {
-      /* If the real part is NaN the result is NaN + iNaN.  */
-      __real__ retval = __nanl ("");
-      __imag__ retval = __nanl ("");
-
-#ifdef FE_INVALID
-      if (rcls != FP_NAN || icls != FP_NAN)
-	feraiseexcept (FE_INVALID);
-#endif
-    }
-
-  return retval;
-}
-weak_alias (__cexpl, cexpl)
diff --git a/newlib/libc/sys/linux/cmath/s_clog.c b/newlib/libc/sys/linux/cmath/s_clog.c
deleted file mode 100644
index f796024b4..000000000
--- a/newlib/libc/sys/linux/cmath/s_clog.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Compute complex natural logarithm.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__clog (__complex__ double x)
-{
-  __complex__ double result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PI : 0.0;
-      __imag__ result = __copysign (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabs (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_log (__ieee754_hypot (__real__ x,
-							__imag__ x));
-      __imag__ result = __ieee754_atan2 (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nan ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VAL;
-      else
-	__real__ result = __nan ("");
-    }
-
-  return result;
-}
-weak_alias (__clog, clog)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__clog, __clogl)
-weak_alias (__clog, clogl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_clog10.c b/newlib/libc/sys/linux/cmath/s_clog10.c
deleted file mode 100644
index 62c2ca724..000000000
--- a/newlib/libc/sys/linux/cmath/s_clog10.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Compute complex base 10 logarithm.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__clog10 (__complex__ double x)
-{
-  __complex__ double result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PI : 0.0;
-      __imag__ result = __copysign (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabs (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_log10 (__ieee754_hypot (__real__ x,
-							  __imag__ x));
-      __imag__ result = M_LOG10E * __ieee754_atan2 (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nan ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VAL;
-      else
-	__real__ result = __nan ("");
-    }
-
-  return result;
-}
-weak_alias (__clog10, clog10)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__clog10, __clog10l)
-weak_alias (__clog10, clog10l)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_clog10f.c b/newlib/libc/sys/linux/cmath/s_clog10f.c
deleted file mode 100644
index 6d60c5fc2..000000000
--- a/newlib/libc/sys/linux/cmath/s_clog10f.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Compute complex base 10 logarithm.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__clog10f (__complex__ float x)
-{
-  __complex__ float result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PI : 0.0;
-      __imag__ result = __copysignf (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabsf (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_log10f (__ieee754_hypotf (__real__ x,
-							    __imag__ x));
-      __imag__ result = M_LOG10E * __ieee754_atan2f (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nanf ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VALF;
-      else
-	__real__ result = __nanf ("");
-    }
-
-  return result;
-}
-weak_alias (__clog10f, clog10f)
diff --git a/newlib/libc/sys/linux/cmath/s_clog10l.c b/newlib/libc/sys/linux/cmath/s_clog10l.c
deleted file mode 100644
index f901543d0..000000000
--- a/newlib/libc/sys/linux/cmath/s_clog10l.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Compute complex base 10 logarithm.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__clog10l (__complex__ long double x)
-{
-  __complex__ long double result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PIl : 0.0;
-      __imag__ result = __copysignl (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabsl (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_log10l (__ieee754_hypotl (__real__ x,
-							    __imag__ x));
-      __imag__ result = M_LOG10El * __ieee754_atan2l (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nanl ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VALL;
-      else
-	__real__ result = __nanl ("");
-    }
-
-  return result;
-}
-weak_alias (__clog10l, clog10l)
diff --git a/newlib/libc/sys/linux/cmath/s_clogf.c b/newlib/libc/sys/linux/cmath/s_clogf.c
deleted file mode 100644
index c7151f2e5..000000000
--- a/newlib/libc/sys/linux/cmath/s_clogf.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Compute complex natural logarithm.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__clogf (__complex__ float x)
-{
-  __complex__ float result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PI : 0.0;
-      __imag__ result = __copysignf (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabsf (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_logf (__ieee754_hypotf (__real__ x,
-							  __imag__ x));
-      __imag__ result = __ieee754_atan2f (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nanf ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VALF;
-      else
-	__real__ result = __nanf ("");
-    }
-
-  return result;
-}
-weak_alias (__clogf, clogf)
diff --git a/newlib/libc/sys/linux/cmath/s_clogl.c b/newlib/libc/sys/linux/cmath/s_clogl.c
deleted file mode 100644
index 43118f768..000000000
--- a/newlib/libc/sys/linux/cmath/s_clogl.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Compute complex natural logarithm.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__clogl (__complex__ long double x)
-{
-  __complex__ long double result;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls == FP_ZERO && icls == FP_ZERO)
-    {
-      /* Real and imaginary part are 0.0.  */
-      __imag__ result = signbit (__real__ x) ? M_PIl : 0.0;
-      __imag__ result = __copysignl (__imag__ result, __imag__ x);
-      /* Yes, the following line raises an exception.  */
-      __real__ result = -1.0 / fabsl (__real__ x);
-    }
-  else if (rcls != FP_NAN && icls != FP_NAN)
-    {
-      /* Neither real nor imaginary part is NaN.  */
-      __real__ result = __ieee754_logl (__ieee754_hypotl (__real__ x,
-							  __imag__ x));
-      __imag__ result = __ieee754_atan2l (__imag__ x, __real__ x);
-    }
-  else
-    {
-      __imag__ result = __nanl ("");
-      if (rcls == FP_INFINITE || icls == FP_INFINITE)
-	/* Real or imaginary part is infinite.  */
-	__real__ result = HUGE_VALL;
-      else
-	__real__ result = __nanl ("");
-    }
-
-  return result;
-}
-weak_alias (__clogl, clogl)
diff --git a/newlib/libc/sys/linux/cmath/s_cpow.c b/newlib/libc/sys/linux/cmath/s_cpow.c
deleted file mode 100644
index 9018a8a65..000000000
--- a/newlib/libc/sys/linux/cmath/s_cpow.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Complex power of double values.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__cpow (__complex__ double x, __complex__ double c)
-{
-  return __cexp (c * __clog (x));
-}
-weak_alias (__cpow, cpow)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__cpow, __cpowl)
-weak_alias (__cpow, cpowl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_cpowf.c b/newlib/libc/sys/linux/cmath/s_cpowf.c
deleted file mode 100644
index b0c032422..000000000
--- a/newlib/libc/sys/linux/cmath/s_cpowf.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Complex power of float values.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__cpowf (__complex__ float x, __complex__ float c)
-{
-  return __cexpf (c * __clogf (x));
-}
-weak_alias (__cpowf, cpowf)
diff --git a/newlib/libc/sys/linux/cmath/s_cpowl.c b/newlib/libc/sys/linux/cmath/s_cpowl.c
deleted file mode 100644
index 4c358b3eb..000000000
--- a/newlib/libc/sys/linux/cmath/s_cpowl.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Complex power of long double values.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-
-__complex__ long double
-__cpowl (__complex__ long double x, __complex__ long double c)
-{
-  return __cexpl (c * __clogl (x));
-}
-weak_alias (__cpowl, cpowl)
diff --git a/newlib/libc/sys/linux/cmath/s_cproj.c b/newlib/libc/sys/linux/cmath/s_cproj.c
deleted file mode 100644
index 6c9e41704..000000000
--- a/newlib/libc/sys/linux/cmath/s_cproj.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Compute projection of complex double value to Riemann sphere.
-   Copyright (C) 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ double
-__cproj (__complex__ double x)
-{
-  __complex__ double res;
-
-  if (isnan (__real__ x) && isnan (__imag__ x))
-    return x;
-  else if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      __real__ res = INFINITY;
-      __imag__ res = __copysign (0.0, __imag__ x);
-    }
-  else
-    {
-      double den = __real__ x * __real__ x + __imag__ x * __imag__ x + 1.0;
-
-      __real__ res = (2.0 * __real__ x) / den;
-      __imag__ res = (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__cproj, cproj)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__cproj, __cprojl)
-weak_alias (__cproj, cprojl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_cprojf.c b/newlib/libc/sys/linux/cmath/s_cprojf.c
deleted file mode 100644
index a302078b5..000000000
--- a/newlib/libc/sys/linux/cmath/s_cprojf.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Compute projection of complex float value to Riemann sphere.
-   Copyright (C) 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-#include "math_private.h"
-
-__complex__ float
-__cprojf (__complex__ float x)
-{
-  __complex__ float res;
-
-  if (isnan (__real__ x) && isnan (__imag__ x))
-    return x;
-  else if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      __real__ res = INFINITY;
-      __imag__ res = __copysignf (0.0, __imag__ x);
-    }
-  else
-    {
-      float den = __real__ x * __real__ x + __imag__ x * __imag__ x + 1.0;
-
-      __real__ res = (2.0 * __real__ x) / den;
-      __imag__ res = (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__cprojf, cprojf)
diff --git a/newlib/libc/sys/linux/cmath/s_cprojl.c b/newlib/libc/sys/linux/cmath/s_cprojl.c
deleted file mode 100644
index c70cdc47d..000000000
--- a/newlib/libc/sys/linux/cmath/s_cprojl.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Compute projection of complex long double value to Riemann sphere.
-   Copyright (C) 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-
-__complex__ long double
-__cprojl (__complex__ long double x)
-{
-  __complex__ long double res;
-
-  if (isnan (__real__ x) && isnan (__imag__ x))
-    return x;
-  else if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      __real__ res = INFINITY;
-      __imag__ res = __copysignl (0.0, __imag__ x);
-    }
-  else
-    {
-      long double den = (__real__ x * __real__ x + __imag__ x * __imag__ x
-			 + 1.0);
-
-      __real__ res = (2.0 * __real__ x) / den;
-      __imag__ res = (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__cprojl, cprojl)
diff --git a/newlib/libc/sys/linux/cmath/s_csin.c b/newlib/libc/sys/linux/cmath/s_csin.c
deleted file mode 100644
index eb380e2c3..000000000
--- a/newlib/libc/sys/linux/cmath/s_csin.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Complex sine function for double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__csin (__complex__ double x)
-{
-  __complex__ double retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabs (__real__ x);
-
-  if (icls >= FP_ZERO)
-    {
-      /* Imaginary part is finite.  */
-      if (rcls >= FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  double sinh_val = __ieee754_sinh (__imag__ x);
-	  double cosh_val = __ieee754_cosh (__imag__ x);
-	  double sinix, cosix;
-
-	  __sincos (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * sinix;
-	  __imag__ retval = sinh_val * cosix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = __nan ("");
-	      __imag__ retval = __imag__ x;
-
-#ifdef FE_INVALID
-	      if (rcls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nan ("");
-	      __imag__ retval = __nan ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (icls == FP_INFINITE)
-    {
-      /* Imaginary part is infinite.  */
-      if (rcls == FP_ZERO)
-	{
-	  /* Real part is 0.0.  */
-	  __real__ retval = __copysign (0.0, negate ? -1.0 : 1.0);
-	  __imag__ retval = __imag__ x;
-	}
-      else if (rcls > FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  double sinix, cosix;
-
-	  __sincos (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysign (HUGE_VAL, sinix);
-	  __imag__ retval = __copysign (HUGE_VAL, cosix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	  if (signbit (__imag__ x))
-	    __imag__ retval = -__imag__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = __nan ("");
-	  __imag__ retval = HUGE_VAL;
-
-#ifdef FE_INVALID
-	  if (rcls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      if (rcls == FP_ZERO)
-	__real__ retval = __copysign (0.0, negate ? -1.0 : 1.0);
-      else
-	__real__ retval = __nan ("");
-      __imag__ retval = __nan ("");
-    }
-
-  return retval;
-}
-weak_alias (__csin, csin)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__csin, __csinl)
-weak_alias (__csin, csinl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_csinf.c b/newlib/libc/sys/linux/cmath/s_csinf.c
deleted file mode 100644
index b7278810d..000000000
--- a/newlib/libc/sys/linux/cmath/s_csinf.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Complex sine function for float.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__csinf (__complex__ float x)
-{
-  __complex__ float retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabsf (__real__ x);
-
-  if (icls >= FP_ZERO)
-    {
-      /* Imaginary part is finite.  */
-      if (rcls >= FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  float sinh_val = __ieee754_sinhf (__imag__ x);
-	  float cosh_val = __ieee754_coshf (__imag__ x);
-	  float sinix, cosix;
-
-	  __sincosf (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * sinix;
-	  __imag__ retval = sinh_val * cosix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = __nanf ("");
-	      __imag__ retval = __imag__ x;
-
-#ifdef FE_INVALID
-	      if (rcls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nanf ("");
-	      __imag__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (icls == FP_INFINITE)
-    {
-      /* Imaginary part is infinite.  */
-      if (rcls == FP_ZERO)
-	{
-	  /* Real part is 0.0.  */
-	  __real__ retval = __copysignf (0.0, negate ? -1.0 : 1.0);
-	  __imag__ retval = __imag__ x;
-	}
-      else if (rcls > FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  float sinix, cosix;
-
-	  __sincosf (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignf (HUGE_VALF, sinix);
-	  __imag__ retval = __copysignf (HUGE_VALF, cosix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	  if (signbit (__imag__ x))
-	    __imag__ retval = -__imag__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = __nanf ("");
-	  __imag__ retval = HUGE_VALF;
-
-#ifdef FE_INVALID
-	  if (rcls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      if (rcls == FP_ZERO)
-	__real__ retval = __copysignf (0.0, negate ? -1.0 : 1.0);
-      else
-	__real__ retval = __nanf ("");
-      __imag__ retval = __nanf ("");
-    }
-
-  return retval;
-}
-weak_alias (__csinf, csinf)
diff --git a/newlib/libc/sys/linux/cmath/s_csinh.c b/newlib/libc/sys/linux/cmath/s_csinh.c
deleted file mode 100644
index f0e0cc61f..000000000
--- a/newlib/libc/sys/linux/cmath/s_csinh.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/* Complex sine hyperbole function for double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__csinh (__complex__ double x)
-{
-  __complex__ double retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabs (__real__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double sinh_val = __ieee754_sinh (__real__ x);
-	  double cosh_val = __ieee754_cosh (__real__ x);
-	  double sinix, cosix;
-
-	  __sincos (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = sinh_val * cosix;
-	  __imag__ retval = cosh_val * sinix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (rcls == FP_ZERO)
-	    {
-	      /* Real part is 0.0.  */
-	      __real__ retval = __copysign (0.0, negate ? -1.0 : 1.0);
-	      __imag__ retval = __nan ("") + __nan ("");
-
-#ifdef FE_INVALID
-	      if (icls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nan ("");
-	      __imag__ retval = __nan ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = negate ? -HUGE_VAL : HUGE_VAL;
-	  __imag__ retval = __imag__ x;
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  double sinix, cosix;
-
-	  __sincos (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysign (HUGE_VAL, cosix);
-	  __imag__ retval = __copysign (HUGE_VAL, sinix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VAL;
-	  __imag__ retval = __nan ("") + __nan ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nan ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nan ("");
-    }
-
-  return retval;
-}
-weak_alias (__csinh, csinh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__csinh, __csinhl)
-weak_alias (__csinh, csinhl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_csinhf.c b/newlib/libc/sys/linux/cmath/s_csinhf.c
deleted file mode 100644
index 5cf80d0f9..000000000
--- a/newlib/libc/sys/linux/cmath/s_csinhf.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Complex sine hyperbole function for float.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__csinhf (__complex__ float x)
-{
-  __complex__ float retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabsf (__real__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float sinh_val = __ieee754_sinhf (__real__ x);
-	  float cosh_val = __ieee754_coshf (__real__ x);
-	  float sinix, cosix;
-
-	  __sincosf (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = sinh_val * cosix;
-	  __imag__ retval = cosh_val * sinix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (rcls == FP_ZERO)
-	    {
-	      /* Real part is 0.0.  */
-	      __real__ retval = __copysignf (0.0, negate ? -1.0 : 1.0);
-	      __imag__ retval = __nanf ("") + __nanf ("");
-
-#ifdef FE_INVALID
-	      if (icls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nanf ("");
-	      __imag__ retval = __nanf ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = negate ? -HUGE_VALF : HUGE_VALF;
-	  __imag__ retval = __imag__ x;
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  float sinix, cosix;
-
-	  __sincosf (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignf (HUGE_VALF, cosix);
-	  __imag__ retval = __copysignf (HUGE_VALF, sinix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VALF;
-	  __imag__ retval = __nanf ("") + __nanf ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nanf ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nanf ("");
-    }
-
-  return retval;
-}
-weak_alias (__csinhf, csinhf)
diff --git a/newlib/libc/sys/linux/cmath/s_csinhl.c b/newlib/libc/sys/linux/cmath/s_csinhl.c
deleted file mode 100644
index 226075634..000000000
--- a/newlib/libc/sys/linux/cmath/s_csinhl.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Complex sine hyperbole function for long double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__csinhl (__complex__ long double x)
-{
-  __complex__ long double retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabsl (__real__ x);
-
-  if (rcls >= FP_ZERO)
-    {
-      /* Real part is finite.  */
-      if (icls >= FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double sinh_val = __ieee754_sinhl (__real__ x);
-	  long double cosh_val = __ieee754_coshl (__real__ x);
-	  long double sinix, cosix;
-
-	  __sincosl (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = sinh_val * cosix;
-	  __imag__ retval = cosh_val * sinix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (rcls == FP_ZERO)
-	    {
-	      /* Real part is 0.0.  */
-	      __real__ retval = __copysignl (0.0, negate ? -1.0 : 1.0);
-	      __imag__ retval = __nanl ("") + __nanl ("");
-
-#ifdef FE_INVALID
-	      if (icls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nanl ("");
-	      __imag__ retval = __nanl ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (rcls == FP_INFINITE)
-    {
-      /* Real part is infinite.  */
-      if (icls == FP_ZERO)
-	{
-	  /* Imaginary part is 0.0.  */
-	  __real__ retval = negate ? -HUGE_VALL : HUGE_VALL;
-	  __imag__ retval = __imag__ x;
-	}
-      else if (icls > FP_ZERO)
-	{
-	  /* Imaginary part is finite.  */
-	  long double sinix, cosix;
-
-	  __sincosl (__imag__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignl (HUGE_VALL, cosix);
-	  __imag__ retval = __copysignl (HUGE_VALL, sinix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = HUGE_VALL;
-	  __imag__ retval = __nanl ("") + __nanl ("");
-
-#ifdef FE_INVALID
-	  if (icls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      __real__ retval = __nanl ("");
-      __imag__ retval = __imag__ x == 0.0 ? __imag__ x : __nanl ("");
-    }
-
-  return retval;
-}
-weak_alias (__csinhl, csinhl)
diff --git a/newlib/libc/sys/linux/cmath/s_csinl.c b/newlib/libc/sys/linux/cmath/s_csinl.c
deleted file mode 100644
index f7a1c4360..000000000
--- a/newlib/libc/sys/linux/cmath/s_csinl.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Complex sine function for long double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__csinl (__complex__ long double x)
-{
-  __complex__ long double retval;
-  int negate = signbit (__real__ x);
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  __real__ x = fabsl (__real__ x);
-
-  if (icls >= FP_ZERO)
-    {
-      /* Imaginary part is finite.  */
-      if (rcls >= FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  long double sinh_val = __ieee754_sinhl (__imag__ x);
-	  long double cosh_val = __ieee754_coshl (__imag__ x);
-	  long double sinix, cosix;
-
-	  __sincosl (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = cosh_val * sinix;
-	  __imag__ retval = sinh_val * cosix;
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	}
-      else
-	{
-	  if (icls == FP_ZERO)
-	    {
-	      /* Imaginary part is 0.0.  */
-	      __real__ retval = __nanl ("");
-	      __imag__ retval = __imag__ x;
-
-#ifdef FE_INVALID
-	      if (rcls == FP_INFINITE)
-		feraiseexcept (FE_INVALID);
-#endif
-	    }
-	  else
-	    {
-	      __real__ retval = __nanl ("");
-	      __imag__ retval = __nanl ("");
-
-#ifdef FE_INVALID
-	      feraiseexcept (FE_INVALID);
-#endif
-	    }
-	}
-    }
-  else if (icls == FP_INFINITE)
-    {
-      /* Imaginary part is infinite.  */
-      if (rcls == FP_ZERO)
-	{
-	  /* Real part is 0.0.  */
-	  __real__ retval = __copysignl (0.0, negate ? -1.0 : 1.0);
-	  __imag__ retval = __imag__ x;
-	}
-      else if (rcls > FP_ZERO)
-	{
-	  /* Real part is finite.  */
-	  long double sinix, cosix;
-
-	  __sincosl (__real__ x, &sinix, &cosix);
-
-	  __real__ retval = __copysignl (HUGE_VALL, sinix);
-	  __imag__ retval = __copysignl (HUGE_VALL, cosix);
-
-	  if (negate)
-	    __real__ retval = -__real__ retval;
-	  if (signbit (__imag__ x))
-	    __imag__ retval = -__imag__ retval;
-	}
-      else
-	{
-	  /* The addition raises the invalid exception.  */
-	  __real__ retval = __nanl ("");
-	  __imag__ retval = HUGE_VALL;
-
-#ifdef FE_INVALID
-	  if (rcls == FP_INFINITE)
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      if (rcls == FP_ZERO)
-	__real__ retval = __copysignl (0.0, negate ? -1.0 : 1.0);
-      else
-	__real__ retval = __nanl ("");
-      __imag__ retval = __nanl ("");
-    }
-
-  return retval;
-}
-weak_alias (__csinl, csinl)
diff --git a/newlib/libc/sys/linux/cmath/s_csqrt.c b/newlib/libc/sys/linux/cmath/s_csqrt.c
deleted file mode 100644
index 0bb6690b1..000000000
--- a/newlib/libc/sys/linux/cmath/s_csqrt.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Complex square root of double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Based on an algorithm by Stephen L. Moshier <moshier@world.std.com>.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__csqrt (__complex__ double x)
-{
-  __complex__ double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VAL;
-	  __imag__ res = __imag__ x;
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = icls == FP_NAN ? __nan ("") : 0;
-	      __imag__ res = __copysign (HUGE_VAL, __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = __real__ x;
-	      __imag__ res = (icls == FP_NAN
-			      ? __nan ("") : __copysign (0.0, __imag__ x));
-	    }
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-	}
-    }
-  else
-    {
-      if (icls == FP_ZERO)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = 0.0;
-	      __imag__ res = __copysign (__ieee754_sqrt (-__real__ x),
-					 __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = fabs (__ieee754_sqrt (__real__ x));
-	      __imag__ res = __copysign (0.0, __imag__ x);
-	    }
-	}
-      else if (rcls == FP_ZERO)
-	{
-	  double r = __ieee754_sqrt (0.5 * fabs (__imag__ x));
-
-	  __real__ res = __copysign (r, __imag__ x);
-	  __imag__ res = r;
-	}
-      else
-	{
-	  double d, r, s;
-
-	  d = __ieee754_hypot (__real__ x, __imag__ x);
-	  /* Use the identity   2  Re res  Im res = Im x
-	     to avoid cancellation error in  d +/- Re x.  */
-	  if (__real__ x > 0)
-	    {
-	      r = __ieee754_sqrt (0.5 * d + 0.5 * __real__ x);
-	      s = (0.5 * __imag__ x) / r;
-	    }
-	  else
-	    {
-	      s = __ieee754_sqrt (0.5 * d - 0.5 * __real__ x);
-	      r = fabs ((0.5 * __imag__ x) / s);
-	    }
-
-	  __real__ res = r;
-	  __imag__ res = __copysign (s, __imag__ x);
-	}
-    }
-
-  return res;
-}
-weak_alias (__csqrt, csqrt)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__csqrt, __csqrtl)
-weak_alias (__csqrt, csqrtl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_csqrtf.c b/newlib/libc/sys/linux/cmath/s_csqrtf.c
deleted file mode 100644
index f7b18368b..000000000
--- a/newlib/libc/sys/linux/cmath/s_csqrtf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Complex square root of float value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Based on an algorithm by Stephen L. Moshier <moshier@world.std.com>.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__csqrtf (__complex__ float x)
-{
-  __complex__ float res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALF;
-	  __imag__ res = __imag__ x;
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = icls == FP_NAN ? __nanf ("") : 0;
-	      __imag__ res = __copysignf (HUGE_VALF, __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = __real__ x;
-	      __imag__ res = (icls == FP_NAN
-			      ? __nanf ("") : __copysignf (0.0, __imag__ x));
-	    }
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-	}
-    }
-  else
-    {
-      if (icls == FP_ZERO)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = 0.0;
-	      __imag__ res = __copysignf (__ieee754_sqrtf (-__real__ x),
-					  __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = fabsf (__ieee754_sqrtf (__real__ x));
-	      __imag__ res = __copysignf (0.0, __imag__ x);
-	    }
-	}
-      else if (rcls == FP_ZERO)
-	{
-	  float r = __ieee754_sqrtf (0.5 * fabsf (__imag__ x));
-
-	  __real__ res = __copysignf (r, __imag__ x);
-	  __imag__ res = r;
-	}
-      else
-	{
-	  float d, r, s;
-
-	  d = __ieee754_hypotf (__real__ x, __imag__ x);
-	  /* Use the identity   2  Re res  Im res = Im x
-	     to avoid cancellation error in  d +/- Re x.  */
-	  if (__real__ x > 0)
-	    {
-	      r = __ieee754_sqrtf (0.5f * d + 0.5f * __real__ x);
-	      s = (0.5f * __imag__ x) / r;
-	    }
-	  else
-	    {
-	      s = __ieee754_sqrtf (0.5f * d - 0.5f * __real__ x);
-	      r = fabsf ((0.5f * __imag__ x) / s);
-	    }
-
-	  __real__ res = r;
-	  __imag__ res = __copysignf (s, __imag__ x);
-	}
-    }
-
-  return res;
-}
-weak_alias (__csqrtf, csqrtf)
diff --git a/newlib/libc/sys/linux/cmath/s_csqrtl.c b/newlib/libc/sys/linux/cmath/s_csqrtl.c
deleted file mode 100644
index 8e27750a0..000000000
--- a/newlib/libc/sys/linux/cmath/s_csqrtl.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Complex square root of long double value.
-   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Based on an algorithm by Stephen L. Moshier <moshier@world.std.com>.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__csqrtl (__complex__ long double x)
-{
-  __complex__ long double res;
-  int rcls = fpclassify (__real__ x);
-  int icls = fpclassify (__imag__ x);
-
-  if (rcls <= FP_INFINITE || icls <= FP_INFINITE)
-    {
-      if (icls == FP_INFINITE)
-	{
-	  __real__ res = HUGE_VALL;
-	  __imag__ res = __imag__ x;
-	}
-      else if (rcls == FP_INFINITE)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = icls == FP_NAN ? __nanl ("") : 0;
-	      __imag__ res = __copysignl (HUGE_VALL, __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = __real__ x;
-	      __imag__ res = (icls == FP_NAN
-			      ? __nanl ("") : __copysignl (0.0, __imag__ x));
-	    }
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-	}
-    }
-  else
-    {
-      if (icls == FP_ZERO)
-	{
-	  if (__real__ x < 0.0)
-	    {
-	      __real__ res = 0.0;
-	      __imag__ res = __copysignl (__ieee754_sqrtl (-__real__ x),
-					  __imag__ x);
-	    }
-	  else
-	    {
-	      __real__ res = fabsl (__ieee754_sqrtl (__real__ x));
-	      __imag__ res = __copysignl (0.0, __imag__ x);
-	    }
-	}
-      else if (rcls == FP_ZERO)
-	{
-	  long double r = __ieee754_sqrtl (0.5 * fabsl (__imag__ x));
-
-	  __real__ res = __copysignl (r, __imag__ x);
-	  __imag__ res = r;
-	}
-      else
-	{
-	  long double d, r, s;
-
-	  d = __ieee754_hypotl (__real__ x, __imag__ x);
-	  /* Use the identity   2  Re res  Im res = Im x
-	     to avoid cancellation error in  d +/- Re x.  */
-	  if (__real__ x > 0)
-	    {
-	      r = __ieee754_sqrtl (0.5L * d + 0.5L * __real__ x);
-	      s = (0.5L * __imag__ x) / r;
-	    }
-	  else
-	    {
-	      s = __ieee754_sqrtl (0.5L * d - 0.5L * __real__ x);
-	      r = fabsl ((0.5L * __imag__ x) / s);
-	    }
-
-	  __real__ res = r;
-	  __imag__ res = __copysignl (s, __imag__ x);
-	}
-    }
-
-  return res;
-}
-weak_alias (__csqrtl, csqrtl)
diff --git a/newlib/libc/sys/linux/cmath/s_ctan.c b/newlib/libc/sys/linux/cmath/s_ctan.c
deleted file mode 100644
index 6a09fe465..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctan.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Complex tangent function for double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__ctan (__complex__ double x)
-{
-  __complex__ double res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinf (__imag__ x))
-	{
-	  __real__ res = __copysign (0.0, __real__ x);
-	  __imag__ res = __copysign (1.0, __imag__ x);
-	}
-      else if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-
-#ifdef FE_INVALID
-	  if (__isinf (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      double sin2rx, cos2rx;
-      double den;
-
-      __sincos (2.0 * __real__ x, &sin2rx, &cos2rx);
-
-      den = cos2rx + __ieee754_cosh (2.0 * __imag__ x);
-
-      __real__ res = sin2rx / den;
-      __imag__ res = __ieee754_sinh (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__ctan, ctan)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__ctan, __ctanl)
-weak_alias (__ctan, ctanl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_ctanf.c b/newlib/libc/sys/linux/cmath/s_ctanf.c
deleted file mode 100644
index 89bc84741..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctanf.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Complex tangent function for float.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__ctanf (__complex__ float x)
-{
-  __complex__ float res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinff (__imag__ x))
-	{
-	  __real__ res = __copysignf (0.0, __real__ x);
-	  __imag__ res = __copysignf (1.0, __imag__ x);
-	}
-      else if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (__isinff (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      float sin2rx, cos2rx;
-      float den;
-
-      __sincosf (2.0 * __real__ x, &sin2rx, &cos2rx);
-
-      den = cos2rx + __ieee754_coshf (2.0 * __imag__ x);
-
-      __real__ res = sin2rx / den;
-      __imag__ res = __ieee754_sinhf (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__ctanf, ctanf)
diff --git a/newlib/libc/sys/linux/cmath/s_ctanh.c b/newlib/libc/sys/linux/cmath/s_ctanh.c
deleted file mode 100644
index 971cd9040..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctanh.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Complex hyperbole tangent for double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ double
-__ctanh (__complex__ double x)
-{
-  __complex__ double res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinf (__real__ x))
-	{
-	  __real__ res = __copysign (1.0, __real__ x);
-	  __imag__ res = __copysign (0.0, __imag__ x);
-	}
-      else if (__imag__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nan ("");
-	  __imag__ res = __nan ("");
-
-#ifdef FE_INVALID
-	  if (__isinf (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      double sin2ix, cos2ix;
-      double den;
-
-      __sincos (2.0 * __imag__ x, &sin2ix, &cos2ix);
-
-      den = (__ieee754_cosh (2.0 * __real__ x) + cos2ix);
-
-      __real__ res = __ieee754_sinh (2.0 * __real__ x) / den;
-      __imag__ res = sin2ix / den;
-    }
-
-  return res;
-}
-weak_alias (__ctanh, ctanh)
-#ifdef NO_LONG_DOUBLE
-strong_alias (__ctanh, __ctanhl)
-weak_alias (__ctanh, ctanhl)
-#endif
diff --git a/newlib/libc/sys/linux/cmath/s_ctanhf.c b/newlib/libc/sys/linux/cmath/s_ctanhf.c
deleted file mode 100644
index b9e3c57fc..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctanhf.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Complex hyperbole tangent for float.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ float
-__ctanhf (__complex__ float x)
-{
-  __complex__ float res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinff (__real__ x))
-	{
-	  __real__ res = __copysignf (1.0, __real__ x);
-	  __imag__ res = __copysignf (0.0, __imag__ x);
-	}
-      else if (__imag__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nanf ("");
-	  __imag__ res = __nanf ("");
-
-#ifdef FE_INVALID
-	  if (__isinff (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      float sin2ix, cos2ix;
-      float den;
-
-      __sincosf (2.0 * __imag__ x, &sin2ix, &cos2ix);
-
-      den = (__ieee754_coshf (2.0 * __real__ x) + cos2ix);
-
-      __real__ res = __ieee754_sinhf (2.0 * __real__ x) / den;
-      __imag__ res = sin2ix / den;
-    }
-
-  return res;
-}
-weak_alias (__ctanhf, ctanhf)
diff --git a/newlib/libc/sys/linux/cmath/s_ctanhl.c b/newlib/libc/sys/linux/cmath/s_ctanhl.c
deleted file mode 100644
index 7bf6b3919..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctanhl.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Complex hyperbole tangent for long double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__ctanhl (__complex__ long double x)
-{
-  __complex__ long double res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinfl (__real__ x))
-	{
-	  __real__ res = __copysignl (1.0, __real__ x);
-	  __imag__ res = __copysignl (0.0, __imag__ x);
-	}
-      else if (__imag__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-
-#ifdef FE_INVALID
-	  if (__isinfl (__imag__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      long double sin2ix, cos2ix;
-      long double den;
-
-      __sincosl (2.0 * __imag__ x, &sin2ix, &cos2ix);
-
-      den = (__ieee754_coshl (2.0 * __real__ x) + cos2ix);
-
-      __real__ res = __ieee754_sinhl (2.0 * __real__ x) / den;
-      __imag__ res = sin2ix / den;
-    }
-
-  return res;
-}
-weak_alias (__ctanhl, ctanhl)
diff --git a/newlib/libc/sys/linux/cmath/s_ctanl.c b/newlib/libc/sys/linux/cmath/s_ctanl.c
deleted file mode 100644
index fa153e9b3..000000000
--- a/newlib/libc/sys/linux/cmath/s_ctanl.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Complex tangent function for long double.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <complex.h>
-#include <fenv.h>
-#include <math.h>
-
-#include "math_private.h"
-
-
-__complex__ long double
-__ctanl (__complex__ long double x)
-{
-  __complex__ long double res;
-
-  if (!isfinite (__real__ x) || !isfinite (__imag__ x))
-    {
-      if (__isinfl (__imag__ x))
-	{
-	  __real__ res = __copysignl (0.0, __real__ x);
-	  __imag__ res = __copysignl (1.0, __imag__ x);
-	}
-      else if (__real__ x == 0.0)
-	{
-	  res = x;
-	}
-      else
-	{
-	  __real__ res = __nanl ("");
-	  __imag__ res = __nanl ("");
-
-#ifdef FE_INVALID
-	  if (__isinfl (__real__ x))
-	    feraiseexcept (FE_INVALID);
-#endif
-	}
-    }
-  else
-    {
-      long double sin2rx, cos2rx;
-      long double den;
-
-      __sincosl (2.0 * __real__ x, &sin2rx, &cos2rx);
-
-      den = cos2rx + __ieee754_coshl (2.0 * __imag__ x);
-
-      __real__ res = sin2rx / den;
-      __imag__ res = __ieee754_sinhl (2.0 * __imag__ x) / den;
-    }
-
-  return res;
-}
-weak_alias (__ctanl, ctanl)
diff --git a/newlib/libc/sys/linux/config.h b/newlib/libc/sys/linux/config.h
deleted file mode 100644
index 76b438c85..000000000
--- a/newlib/libc/sys/linux/config.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#define HAVE_WEAK_SYMBOLS 1
-#define HAVE_GNU_LD 1
-#define HAVE_ELF 1
-#define __ASSUME_REALTIME_SIGNALS 1
-#define ASM_GLOBAL_DIRECTIVE .global
-
-#define TEMP_FAILURE_RETRY(expression) \
-  (__extension__                                                              \
-    ({ long int __result;                                                     \
-       do __result = (long int) (expression);                                 \
-       while (__result == -1L && errno == EINTR);                             \
-       __result; }))
-
-#define UINT32_C(c)    c ## U
-
-#include <machine/sysdep.h>
diff --git a/newlib/libc/sys/linux/configure b/newlib/libc/sys/linux/configure
deleted file mode 100755
index c7e1d3833..000000000
--- a/newlib/libc/sys/linux/configure
+++ /dev/null
@@ -1,3481 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=linux.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-for ac_prog in mawk gawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-fi
-
-LINUX_MACH_LIB=
-if test -n "${machine_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LINUX_MACH_LIB=machine/${machine_dir}/liblinux${machine_dir}.${aext}
-  else
-    LINUX_MACH_LIB=machine/lib.${aext}
-  fi
-fi
-
-
-EXTRA_SUBDIRS=
-EXTRA_SUBLIBS=
-
-if test "${newlib_multithread}" = "yes"; then
-EXTRA_CONFIG_DIRS=linuxthreads
-fi
-if test "x${newlib_elix_level}" = "x1"; then
-EXTRA_SUBDIRS=linuxthreads net
-else 
-EXTRA_SUBDIRS="linuxthreads net intl stdlib iconv dl"
-EXTRA_SUBLIBS="net/libnet.la intl/libintl.la stdlib/libstdlib.la iconv/libiconv.la dl/libdl.la"
-fi
-
-
-
-
-subdirs="machine $EXTRA_CONFIG_DIRS"
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile intl/Makefile net/Makefile stdlib/Makefile iconv/Makefile dl/Makefile cmath/Makefile argp/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@AWK@%$AWK%g
-s%@LINUX_MACH_LIB@%$LINUX_MACH_LIB%g
-s%@EXTRA_SUBDIRS@%$EXTRA_SUBDIRS%g
-s%@EXTRA_SUBLIBS@%$EXTRA_SUBLIBS%g
-s%@subdirs@%$subdirs%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile intl/Makefile net/Makefile stdlib/Makefile iconv/Makefile dl/Makefile cmath/Makefile argp/Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in machine $EXTRA_CONFIG_DIRS; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/sys/linux/configure.in b/newlib/libc/sys/linux/configure.in
deleted file mode 100644
index e03bcd960..000000000
--- a/newlib/libc/sys/linux/configure.in
+++ /dev/null
@@ -1,50 +0,0 @@
-dnl This is the newlib/libc/sys/linux configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(linux.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-AC_PROG_AWK
-fi
-
-LINUX_MACH_LIB=
-if test -n "${machine_dir}"; then
-  if test "${use_libtool}" = "yes"; then
-    LINUX_MACH_LIB=machine/${machine_dir}/liblinux${machine_dir}.${aext}
-  else
-    LINUX_MACH_LIB=machine/lib.${aext}
-  fi
-fi
-AC_SUBST(LINUX_MACH_LIB)
-
-EXTRA_SUBDIRS=
-EXTRA_SUBLIBS=
-
-if test "${newlib_multithread}" = "yes"; then
-EXTRA_CONFIG_DIRS=linuxthreads
-fi
-if test "x${newlib_elix_level}" = "x1"; then
-EXTRA_SUBDIRS=linuxthreads net
-else 
-EXTRA_SUBDIRS="linuxthreads net intl stdlib iconv dl"
-EXTRA_SUBLIBS="net/libnet.la intl/libintl.la stdlib/libstdlib.la iconv/libiconv.la dl/libdl.la"
-fi
-
-AC_SUBST(EXTRA_SUBDIRS)
-AC_SUBST(EXTRA_SUBLIBS)
-
-AC_CONFIG_SUBDIRS(machine $EXTRA_CONFIG_DIRS)
-
-AC_OUTPUT(Makefile intl/Makefile net/Makefile stdlib/Makefile iconv/Makefile dl/Makefile cmath/Makefile argp/Makefile)
diff --git a/newlib/libc/sys/linux/confstr.c b/newlib/libc/sys/linux/confstr.c
deleted file mode 100644
index 6b566b308..000000000
--- a/newlib/libc/sys/linux/confstr.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* Copyright (C) 1991, 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define _GNU_SOURCE 1
-
-#include <stddef.h>
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <confstr.h>
-
-/* If BUF is not NULL and LEN > 0, fill in at most LEN - 1 bytes
-   of BUF with the value corresponding to NAME and zero-terminate BUF.
-   Return the number of bytes required to hold NAME's entire value.  */
-size_t
-confstr (name, buf, len)
-     int name;
-     char *buf;
-     size_t len;
-{
-  const char *string;
-  size_t string_len;
-
-  switch (name)
-    {
-    case _CS_PATH:
-      {
-	static const char cs_path[] = CS_PATH;
-	string = cs_path;
-	string_len = sizeof (cs_path);
-      }
-      break;
-
-    case _CS_V6_WIDTH_RESTRICTED_ENVS:
-      /* We have to return a newline-separated list of named of
-	 programming environements in which the widths of blksize_t,
-	 cc_t, mode_t, nfds_t, pid_t, ptrdiff_t, size_t, speed_t,
-	 ssize_t, suseconds_t, tcflag_t, useconds_t, wchar_t, and
-	 wint_t types are no greater than the width of type long.
-
-	 Currently this means all environment which the system allows.  */
-      {
-	static const char restenvs[] =
-#if _POSIX_V6_ILP32_OFF32 > 0
-	"_POSIX_V6_ILP32_OFF32"
-#endif
-#if _POSIX_V6_ILP32_OFFBIG > 0
-# if _POSIX_V6_ILP32_OFF32 > 0
-	"\n"
-# endif
-	"_POSIX_V6_ILP32_OFFBIG"
-#endif
-#if _POSIX_V6_LP64_OFF64 > 0
-# if _POSIX_V6_ILP32_OFF32 > 0 || _POSIX_V6_ILP32_OFFBIG > 0
-	"\n"
-# endif
-	"_POSIX_V6_LP64_OFF64"
-#endif
-#if _POSIX_V6_LPBIG_OFFBIG > 0
-# if _POSIX_V6_ILP32_OFF32 > 0 || _POSIX_V6_ILP32_OFFBIG > 0 \
-     || _POSIX_V6_LP64_OFF64 > 0
-	"\n"
-# endif
-	"_POSIX_V6_LPBIG_OFFBIG"
-#endif
-	  ;
-	string = restenvs;
-	string_len = sizeof (restenvs);
-      }
-      break;
-
-    case _CS_XBS5_ILP32_OFFBIG_CFLAGS:
-    case _CS_POSIX_V6_ILP32_OFFBIG_CFLAGS:
-    case _CS_LFS_CFLAGS:
-#if _XBS5_LP64_OFF64 == -1 && _XBS5_LPBIG_OFFBIG == -1 && _XBS5_ILP32_OFFBIG == 1
-      /* Signal that we want the new ABI.  */
-      {
-	static const char file_offset[] = "-D_FILE_OFFSET_BITS=64";
-	string = file_offset;
-	string_len = sizeof (file_offset);
-      }
-      break;
-#endif
-      /* FALLTHROUGH */
-
-    case _CS_LFS_LINTFLAGS:
-    case _CS_LFS_LDFLAGS:
-    case _CS_LFS_LIBS:
-    case _CS_LFS64_CFLAGS:
-    case _CS_LFS64_LINTFLAGS:
-    case _CS_LFS64_LDFLAGS:
-    case _CS_LFS64_LIBS:
-
-    case _CS_XBS5_ILP32_OFF32_CFLAGS:
-    case _CS_XBS5_ILP32_OFF32_LDFLAGS:
-    case _CS_XBS5_ILP32_OFF32_LIBS:
-    case _CS_XBS5_ILP32_OFF32_LINTFLAGS:
-    case _CS_XBS5_ILP32_OFFBIG_LDFLAGS:
-    case _CS_XBS5_ILP32_OFFBIG_LIBS:
-    case _CS_XBS5_ILP32_OFFBIG_LINTFLAGS:
-    case _CS_XBS5_LP64_OFF64_CFLAGS:
-    case _CS_XBS5_LP64_OFF64_LDFLAGS:
-    case _CS_XBS5_LP64_OFF64_LIBS:
-    case _CS_XBS5_LP64_OFF64_LINTFLAGS:
-    case _CS_XBS5_LPBIG_OFFBIG_CFLAGS:
-    case _CS_XBS5_LPBIG_OFFBIG_LDFLAGS:
-    case _CS_XBS5_LPBIG_OFFBIG_LIBS:
-    case _CS_XBS5_LPBIG_OFFBIG_LINTFLAGS:
-
-    case _CS_POSIX_V6_ILP32_OFF32_CFLAGS:
-    case _CS_POSIX_V6_ILP32_OFF32_LDFLAGS:
-    case _CS_POSIX_V6_ILP32_OFF32_LIBS:
-    case _CS_POSIX_V6_ILP32_OFF32_LINTFLAGS:
-    case _CS_POSIX_V6_ILP32_OFFBIG_LDFLAGS:
-    case _CS_POSIX_V6_ILP32_OFFBIG_LIBS:
-    case _CS_POSIX_V6_ILP32_OFFBIG_LINTFLAGS:
-    case _CS_POSIX_V6_LP64_OFF64_CFLAGS:
-    case _CS_POSIX_V6_LP64_OFF64_LDFLAGS:
-    case _CS_POSIX_V6_LP64_OFF64_LIBS:
-    case _CS_POSIX_V6_LP64_OFF64_LINTFLAGS:
-    case _CS_POSIX_V6_LPBIG_OFFBIG_CFLAGS:
-    case _CS_POSIX_V6_LPBIG_OFFBIG_LDFLAGS:
-    case _CS_POSIX_V6_LPBIG_OFFBIG_LIBS:
-    case _CS_POSIX_V6_LPBIG_OFFBIG_LINTFLAGS:
-      /* GNU libc does not require special actions to use LFS functions.  */
-      string = "";
-      string_len = 1;
-      break;
-
-    default:
-      __set_errno (EINVAL);
-      return 0;
-    }
-
-  if (len > 0 && buf != NULL)
-    {
-      if (string_len <= len)
-	memcpy (buf, string, string_len);
-      else
-	{
-	  memcpy (buf, string, len - 1);
-	  buf[len - 1] = '\0';
-	}
-    }
-  return string_len;
-}
diff --git a/newlib/libc/sys/linux/confstr.h b/newlib/libc/sys/linux/confstr.h
deleted file mode 100644
index 15859c3b2..000000000
--- a/newlib/libc/sys/linux/confstr.h
+++ /dev/null
@@ -1 +0,0 @@
-#define	CS_PATH	"/bin:/usr/bin"
diff --git a/newlib/libc/sys/linux/crt1.c b/newlib/libc/sys/linux/crt1.c
deleted file mode 100644
index 018e9a2d4..000000000
--- a/newlib/libc/sys/linux/crt1.c
+++ /dev/null
@@ -1,3 +0,0 @@
-/* dummy crt1.c file to override the one normally used by
-   gcc which refers to glibc variables that don't exist in
-   newlib.  */
diff --git a/newlib/libc/sys/linux/ctermid.c b/newlib/libc/sys/linux/ctermid.c
deleted file mode 100644
index 05914ffad..000000000
--- a/newlib/libc/sys/linux/ctermid.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* ctermid */
-
-#include <stdio.h>
-#include <string.h>
-
-static char devname[] = "/dev/tty";
-
-char *
-_DEFUN (ctermid, (buf),
-     char *buf)
-{
-  if (buf == NULL)
-    return devname;
-
-  return strcpy (buf, "/dev/tty");
-}
diff --git a/newlib/libc/sys/linux/dl/Makefile.am b/newlib/libc/sys/linux/dl/Makefile.am
deleted file mode 100644
index 9c73a1367..000000000
--- a/newlib/libc/sys/linux/dl/Makefile.am
+++ /dev/null
@@ -1,25 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -DSHARED -D_GNU_SOURCE $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -I$(srcdir)/..
-
-LIB_SOURCES = \
-	dl-addr.c   dl-deps.c   dl-init.c         dl-load.c     dl-misc.c    dl-profile.c   dl-runtime.c  dl-version.c \
-	dl-close.c  dl-error.c  dl-iteratephdr.c  dl-lookup.c   dl-object.c  dl-profstub.c  dl-support.c \
-	dl-debug.c  dl-fini.c   dl-libc.c         dl-open.c    dl-reloc.c     dl-sym.c   dl-cache.c
-
-AM_CFLAGS = -D_GNU_SOURCE -D__strerror_r=strerror_r
-libdl_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libdl.la
-libdl_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
diff --git a/newlib/libc/sys/linux/dl/Makefile.in b/newlib/libc/sys/linux/dl/Makefile.in
deleted file mode 100644
index 56e88ae0a..000000000
--- a/newlib/libc/sys/linux/dl/Makefile.in
+++ /dev/null
@@ -1,379 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -DSHARED -D_GNU_SOURCE $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -I$(srcdir)/..
-
-LIB_SOURCES = \
-	dl-addr.c   dl-deps.c   dl-init.c         dl-load.c     dl-misc.c    dl-profile.c   dl-runtime.c  dl-version.c \
-	dl-close.c  dl-error.c  dl-iteratephdr.c  dl-lookup.c   dl-object.c  dl-profstub.c  dl-support.c \
-	dl-debug.c  dl-fini.c   dl-libc.c         dl-open.c    dl-reloc.c     dl-sym.c   dl-cache.c
-
-
-AM_CFLAGS = -D_GNU_SOURCE -D__strerror_r=strerror_r
-libdl_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libdl.la
-@USE_LIBTOOL_TRUE@libdl_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  dl-addr.$(OBJEXT) dl-deps.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-init.$(OBJEXT) dl-load.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-misc.$(OBJEXT) dl-profile.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-runtime.$(OBJEXT) dl-version.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-close.$(OBJEXT) dl-error.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-iteratephdr.$(OBJEXT) dl-lookup.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-object.$(OBJEXT) dl-profstub.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-support.$(OBJEXT) dl-debug.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-fini.$(OBJEXT) dl-libc.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-open.$(OBJEXT) dl-reloc.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-sym.$(OBJEXT) dl-cache.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libdl_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libdl_la_OBJECTS =  dl-addr.lo dl-deps.lo dl-init.lo \
-@USE_LIBTOOL_TRUE@dl-load.lo dl-misc.lo dl-profile.lo dl-runtime.lo \
-@USE_LIBTOOL_TRUE@dl-version.lo dl-close.lo dl-error.lo \
-@USE_LIBTOOL_TRUE@dl-iteratephdr.lo dl-lookup.lo dl-object.lo \
-@USE_LIBTOOL_TRUE@dl-profstub.lo dl-support.lo dl-debug.lo dl-fini.lo \
-@USE_LIBTOOL_TRUE@dl-libc.lo dl-open.lo dl-reloc.lo dl-sym.lo \
-@USE_LIBTOOL_TRUE@dl-cache.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libdl_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libdl_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus dl/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libdl.la: $(libdl_la_OBJECTS) $(libdl_la_DEPENDENCIES)
-	$(LINK)  $(libdl_la_LDFLAGS) $(libdl_la_OBJECTS) $(libdl_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = dl
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/dl/abi-tag.h b/newlib/libc/sys/linux/dl/abi-tag.h
deleted file mode 100644
index 85db374c6..000000000
--- a/newlib/libc/sys/linux/dl/abi-tag.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define __ABI_TAG_OS 0
-#ifndef __ABI_TAG_VERSION
-# define __ABI_TAG_VERSION 2,0,0
-#endif
diff --git a/newlib/libc/sys/linux/dl/atomicity.h b/newlib/libc/sys/linux/dl/atomicity.h
deleted file mode 100644
index 8b52ab407..000000000
--- a/newlib/libc/sys/linux/dl/atomicity.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Low-level functions for atomic operations.  ix86 version, x >= 4.
-   Copyright (C) 1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _ATOMICITY_H
-#define _ATOMICITY_H	1
-
-
-
-static inline uint32_t
-__attribute__ ((unused))
-exchange_and_add (volatile uint32_t *mem, uint32_t val)
-{
-  register uint32_t result;
-  __asm__ __volatile__ ("lock; xaddl %0,%1"
-			: "=r" (result), "=m" (*mem) : "0" (val), "1" (*mem));
-  return result;
-}
-
-static inline void
-__attribute__ ((unused))
-atomic_add (volatile uint32_t *mem, int val)
-{
-  __asm__ __volatile__ ("lock; addl %1,%0"
-			: "=m" (*mem) : "ir" (val), "0" (*mem));
-}
-
-static inline char
-__attribute__ ((unused))
-compare_and_swap (volatile long int *p, long int oldval, long int newval)
-{
-  char ret;
-  long int readval;
-
-  __asm__ __volatile__ ("lock; cmpxchgl %3, %1; sete %0"
-                        : "=q" (ret), "=m" (*p), "=a" (readval)
-                        : "r" (newval), "1" (*p), "a" (oldval));
-  return ret;
-}
-
-#endif /* atomicity.h */
diff --git a/newlib/libc/sys/linux/dl/dl-addr.c b/newlib/libc/sys/linux/dl/dl-addr.c
deleted file mode 100644
index 23867491f..000000000
--- a/newlib/libc/sys/linux/dl/dl-addr.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Locate the shared object symbol nearest a given address.
-   Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <stddef.h>
-#include <ldsodefs.h>
-
-int
-internal_function
-_dl_addr (const void *address, Dl_info *info)
-{
-  const ElfW(Addr) addr = DL_LOOKUP_ADDRESS (address);
-  struct link_map *l, *match;
-  const ElfW(Sym) *symtab, *matchsym;
-  const char *strtab;
-  ElfW(Word) strtabsize;
-
-  /* Find the highest-addressed object that ADDRESS is not below.  */
-  match = NULL;
-  for (l = _dl_loaded; l; l = l->l_next)
-    if (addr >= l->l_map_start && addr < l->l_map_end)
-      {
-	/* We know ADDRESS lies within L if in any shared object.
-	   Make sure it isn't past the end of L's segments.  */
-	size_t n = l->l_phnum;
-	if (n > 0)
-	  {
-	    do
-	      --n;
-	    while (l->l_phdr[n].p_type != PT_LOAD);
-	    if (addr >= (l->l_addr +
-			 l->l_phdr[n].p_vaddr + l->l_phdr[n].p_memsz))
-	      /* Off the end of the highest-addressed shared object.  */
-	      continue;
-	  }
-
-	match = l;
-	break;
-      }
-
-  if (match == NULL)
-    return 0;
-
-  /* Now we know what object the address lies in.  */
-  info->dli_fname = match->l_name;
-  info->dli_fbase = (void *) match->l_addr;
-
-  /* If this is the main program the information is incomplete.  */
-  if (__builtin_expect (info->dli_fbase == NULL, 0))
-    {
-      info->dli_fname = _dl_argv[0];
-      info->dli_fbase = (void *) match->l_map_start;
-    }
-
-  symtab = (const void *) D_PTR (match, l_info[DT_SYMTAB]);
-  strtab = (const void *) D_PTR (match, l_info[DT_STRTAB]);
-  strtabsize = match->l_info[DT_STRSZ]->d_un.d_val;
-
-  /* We assume that the string table follows the symbol table, because
-     there is no way in ELF to know the size of the dynamic symbol table!!  */
-  for (matchsym = NULL; (void *) symtab < (void *) strtab; ++symtab)
-    if (addr >= match->l_addr + symtab->st_value
-	&& ((symtab->st_size == 0 && addr == match->l_addr + symtab->st_value)
-	    || addr < match->l_addr + symtab->st_value + symtab->st_size)
-	&& symtab->st_name < strtabsize
-	&& (matchsym == NULL || matchsym->st_value < symtab->st_value)
-	&& (ELFW(ST_BIND) (symtab->st_info) == STB_GLOBAL
-	    || ELFW(ST_BIND) (symtab->st_info) == STB_WEAK))
-      matchsym = symtab;
-
-  if (matchsym)
-    {
-      /* We found a symbol close by.  Fill in its name and exact address.  */
-      info->dli_sname = strtab + matchsym->st_name;
-      info->dli_saddr = (void *) (match->l_addr + matchsym->st_value);
-    }
-  else
-    {
-      /* No symbol matches.  We return only the containing object.  */
-      info->dli_sname = NULL;
-      info->dli_saddr = NULL;
-    }
-
-  return 1;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-cache.c b/newlib/libc/sys/linux/dl/dl-cache.c
deleted file mode 100644
index a71e5e876..000000000
--- a/newlib/libc/sys/linux/dl/dl-cache.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/* Support for reading /etc/ld.so.cache files written by Linux ldconfig.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include <sys/mman.h>
-#include <dl-cache.h>
-#include <machine/dl-procinfo.h>
-#include <machine/weakalias.h>
-
-extern const char *_dl_platform;
-
-#ifndef _DL_PLATFORMS_COUNT
-# define _DL_PLATFORMS_COUNT 0
-#endif
-
-/* This is the starting address and the size of the mmap()ed file.  */
-static struct cache_file *cache;
-static struct cache_file_new *cache_new;
-static size_t cachesize;
-
-/* 1 if cache_data + PTR points into the cache.  */
-#define _dl_cache_verify_ptr(ptr) (ptr < cache_data_size)
-
-/* This is the cache ID we expect.  Normally it is 3 for glibc linked
-   binaries.  */
-int _dl_correct_cache_id = _DL_CACHE_DEFAULT_ID;
-
-#define SEARCH_CACHE(cache) \
-/* We use binary search since the table is sorted in the cache file.	      \
-   The first matching entry in the table is returned.			      \
-   It is important to use the same algorithm as used while generating	      \
-   the cache file.  */							      \
-do									      \
-  {									      \
-    left = 0;								      \
-    right = cache->nlibs - 1;						      \
-									      \
-    while (left <= right)						      \
-      {									      \
-	__typeof__ (cache->libs[0].key) key;				      \
-									      \
-	middle = (left + right) / 2;					      \
-									      \
-	key = cache->libs[middle].key;					      \
-									      \
-	/* Make sure string table indices are not bogus before using	      \
-	   them.  */							      \
-	if (! _dl_cache_verify_ptr (key))				      \
-	  {								      \
-	    cmpres = 1;							      \
-	    break;							      \
-	  }								      \
-									      \
-	/* Actually compare the entry with the key.  */			      \
-	cmpres = _dl_cache_libcmp (name, cache_data + key);		      \
-	if (__builtin_expect (cmpres == 0, 0))				      \
-	  {								      \
-	    /* Found it.  LEFT now marks the last entry for which we	      \
-	       know the name is correct.  */				      \
-	    left = middle;						      \
-									      \
-	    /* There might be entries with this name before the one we	      \
-	       found.  So we have to find the beginning.  */		      \
-	    while (middle > 0)						      \
-	      {								      \
-		__typeof__ (cache->libs[0].key) key;			      \
-									      \
-		key = cache->libs[middle - 1].key;			      \
-		/* Make sure string table indices are not bogus before	      \
-		   using them.  */					      \
-		if (! _dl_cache_verify_ptr (key)			      \
-		    /* Actually compare the entry.  */			      \
-		    || _dl_cache_libcmp (name, cache_data + key) != 0)	      \
-		  break;						      \
-		--middle;						      \
-	      }								      \
-									      \
-	    do								      \
-	      {								      \
-		int flags;						      \
-		__typeof__ (cache->libs[0]) *lib = &cache->libs[middle];      \
-									      \
-		/* Only perform the name test if necessary.  */		      \
-		if (middle > left					      \
-		    /* We haven't seen this string so far.  Test whether the  \
-		       index is ok and whether the name matches.  Otherwise   \
-		       we are done.  */					      \
-		    && (! _dl_cache_verify_ptr (lib->key)		      \
-			|| (_dl_cache_libcmp (name, cache_data + lib->key)    \
-			    != 0)))					      \
-		  break;						      \
-									      \
-		flags = lib->flags;					      \
-		if (_dl_cache_check_flags (flags)			      \
-		    && _dl_cache_verify_ptr (lib->value))		      \
-		  {							      \
-		    if (best == NULL || flags == _dl_correct_cache_id)	      \
-		      {							      \
-			HWCAP_CHECK;					      \
-			best = cache_data + lib->value;			      \
-									      \
-			if (flags == _dl_correct_cache_id)		      \
-			  /* We've found an exact match for the shared	      \
-			     object and no general `ELF' release.  Stop	      \
-			     searching.  */				      \
-			  break;					      \
-		      }							      \
-		  }							      \
-	      }								      \
-	    while (++middle <= right);					      \
-	    break;							      \
-	}								      \
-									      \
-	if (cmpres < 0)							      \
-	  left = middle + 1;						      \
-	else								      \
-	  right = middle - 1;						      \
-      }									      \
-  }									      \
-while (0)
-
-
-
-/* Look up NAME in ld.so.cache and return the file name stored there,
-   or null if none is found.  */
-
-const char *
-internal_function
-_dl_load_cache_lookup (const char *name)
-{
-  int left, right, middle;
-  int cmpres;
-  const char *cache_data;
-  uint32_t cache_data_size;
-  const char *best;
-
-  if (cache == NULL)
-    {
-      /* Read the contents of the file.  */
-      void *file = _dl_sysdep_read_whole_file (LD_SO_CACHE, &cachesize,
-					       PROT_READ);
-
-      /* We can handle three different cache file formats here:
-	 - the old libc5/glibc2.0/2.1 format
-	 - the old format with the new format in it
-	 - only the new format
-	 The following checks if the cache contains any of these formats.  */
-      if (file != MAP_FAILED && cachesize > sizeof *cache
-	  && memcmp (file, CACHEMAGIC, sizeof CACHEMAGIC - 1) == 0)
-	{
-	  size_t offset;
-	  /* Looks ok.  */
-	  cache = file;
-
-	  /* Check for new version.  */
-	  offset = ALIGN_CACHE (sizeof (struct cache_file)
-				+ cache->nlibs * sizeof (struct file_entry));
-
-	  cache_new = (struct cache_file_new *) ((void *) cache + offset);
-	  if (cachesize < (offset + sizeof (struct cache_file_new))
-	      || memcmp (cache_new->magic, CACHEMAGIC_VERSION_NEW,
-			 sizeof CACHEMAGIC_VERSION_NEW - 1) != 0)
-	    cache_new = (void *) -1;
-	}
-      else if (file != MAP_FAILED && cachesize > sizeof *cache_new
-	       && memcmp (file, CACHEMAGIC_VERSION_NEW,
-			  sizeof CACHEMAGIC_VERSION_NEW - 1) == 0)
-	{
-	  cache_new = file;
-	  cache = file;
-	}
-      else
-	{
-	  if (file != MAP_FAILED)
-	    munmap (file, cachesize);
-	  cache = (void *) -1;
-	}
-
-      assert (cache != NULL);
-    }
-
-  if (cache == (void *) -1)
-    /* Previously looked for the cache file and didn't find it.  */
-    return NULL;
-
-  best = NULL;
-
-  if (cache_new != (void *) -1)
-    {
-      /* This file ends in static libraries where we don't have a hwcap.  */
-      unsigned long int *hwcap;
-      uint64_t platform;
-      weak_extern (_dl_hwcap);
-
-      /* This is where the strings start.  */
-      cache_data = (const char *) cache_new;
-
-      /* Now we can compute how large the string table is.  */
-      cache_data_size = (const char *) cache + cachesize - cache_data;
-
-      hwcap = &_dl_hwcap;
-      platform = _dl_string_platform (_dl_platform);
-      if (platform != -1)
-	platform = 1ULL << platform;
-
-      /* Only accept hwcap if it's for the right platform.  */
-#define HWCAP_CHECK \
-      if (_dl_osversion	&& cache_new->libs[middle].osversion > _dl_osversion) \
-	continue;							      \
-      if (_DL_PLATFORMS_COUNT && platform != -1				      \
-	  && (lib->hwcap & _DL_HWCAP_PLATFORM) != 0			      \
-	  && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform)		      \
-	continue;							      \
-      if (hwcap								      \
-	  && ((lib->hwcap & *hwcap & ~_DL_HWCAP_PLATFORM) > *hwcap))	      \
-	continue
-      SEARCH_CACHE (cache_new);
-    }
-  else
-    {
-      /* This is where the strings start.  */
-      cache_data = (const char *) &cache->libs[cache->nlibs];
-
-      /* Now we can compute how large the string table is.  */
-      cache_data_size = (const char *) cache + cachesize - cache_data;
-
-#undef HWCAP_CHECK
-#define HWCAP_CHECK do {} while (0)
-      SEARCH_CACHE (cache);
-    }
-
-  /* Print our result if wanted.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0) && best != NULL)
-    _dl_debug_printf ("  trying file=%s\n", best);
-
-  return best;
-}
-
-#ifndef MAP_COPY
-/* If the system does not support MAP_COPY we cannot leave the file open
-   all the time since this would create problems when the file is replaced.
-   Therefore we provide this function to close the file and open it again
-   once needed.  */
-void
-_dl_unload_cache (void)
-{
-  if (cache != NULL && cache != (struct cache_file *) -1)
-    {
-      munmap (cache, cachesize);
-      cache = NULL;
-    }
-}
-#endif
diff --git a/newlib/libc/sys/linux/dl/dl-cache.h b/newlib/libc/sys/linux/dl/dl-cache.h
deleted file mode 100644
index 0699853e7..000000000
--- a/newlib/libc/sys/linux/dl/dl-cache.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* Support for reading /etc/ld.so.cache files written by Linux ldconfig.
-   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdint.h>
-
-#ifndef _DL_CACHE_DEFAULT_ID
-# define _DL_CACHE_DEFAULT_ID	3
-#endif
-
-#ifndef _dl_cache_check_flags
-# define _dl_cache_check_flags(flags)			\
-  ((flags) == 1 || (flags) == _DL_CACHE_DEFAULT_ID)
-#endif
-
-#ifndef SYSCONFDIR
-# define SYSCONFDIR "/etc"
-#endif
-
-#ifndef LD_SO_CACHE
-# define LD_SO_CACHE SYSCONFDIR "/ld.so.cache"
-#endif
-
-#define CACHEMAGIC "ld.so-1.7.0"
-
-/* libc5 and glibc 2.0/2.1 use the same format.  For glibc 2.2 another
-   format has been added in a compatible way:
-   The beginning of the string table is used for the new table:
-	old_magic
-	nlibs
-	libs[0]
-	...
-	libs[nlibs-1]
-	pad, new magic needs to be aligned
-	     - this is string[0] for the old format
-	new magic - this is string[0] for the new format
-	newnlibs
-	...
-	newlibs[0]
-	...
-	newlibs[newnlibs-1]
-	string 1
-	string 2
-	...
-*/
-struct file_entry
-{
-  int flags;		/* This is 1 for an ELF library.  */
-  unsigned int key, value; /* String table indices.  */
-};
-
-struct cache_file
-{
-  char magic[sizeof CACHEMAGIC - 1];
-  unsigned int nlibs;
-  struct file_entry libs[0];
-};
-
-#define CACHEMAGIC_NEW "glibc-ld.so.cache"
-#define CACHE_VERSION "1.1"
-#define CACHEMAGIC_VERSION_NEW CACHEMAGIC_NEW CACHE_VERSION
-
-
-struct file_entry_new
-{
-  int32_t flags;		/* This is 1 for an ELF library.  */
-  uint32_t key, value;		/* String table indices.  */
-  uint32_t osversion;		/* Required OS version.	 */
-  uint64_t hwcap;		/* Hwcap entry.	 */
-};
-
-struct cache_file_new
-{
-  char magic[sizeof CACHEMAGIC_NEW - 1];
-  char version[sizeof CACHE_VERSION - 1];
-  uint32_t nlibs;		/* Number of entries.  */
-  uint32_t len_strings;		/* Size of string table. */
-  uint32_t unused[5];		/* Leave space for future extensions
-				   and align to 8 byte boundary.  */
-  struct file_entry_new libs[0]; /* Entries describing libraries.  */
-  /* After this the string table of size len_strings is found.	*/
-};
-
-/* Used to align cache_file_new.  */
-#define ALIGN_CACHE(addr)				\
-(((addr) + __alignof__ (struct cache_file_new) -1)	\
- & (~(__alignof__ (struct cache_file_new) - 1)))
-
-static int
-_dl_cache_libcmp (const char *p1, const char *p2)
-{
-  while (*p1 != '\0')
-    {
-      if (*p1 >= '0' && *p1 <= '9')
-        {
-          if (*p2 >= '0' && *p2 <= '9')
-            {
-	      /* Must compare this numerically.  */
-	      int val1;
-	      int val2;
-
-	      val1 = *p1++ - '0';
-	      val2 = *p2++ - '0';
-	      while (*p1 >= '0' && *p1 <= '9')
-	        val1 = val1 * 10 + *p1++ - '0';
-	      while (*p2 >= '0' && *p2 <= '9')
-	        val2 = val2 * 10 + *p2++ - '0';
-	      if (val1 != val2)
-		return val1 - val2;
-	    }
-	  else
-            return 1;
-        }
-      else if (*p2 >= '0' && *p2 <= '9')
-        return -1;
-      else if (*p1 != *p2)
-        return *p1 - *p2;
-      else
-	{
-	  ++p1;
-	  ++p2;
-	}
-    }
-  return *p1 - *p2;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-close.c b/newlib/libc/sys/linux/dl/dl-close.c
deleted file mode 100644
index ef53868d9..000000000
--- a/newlib/libc/sys/linux/dl/dl-close.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* Close a shared object opened by `_dl_open'.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <dlfcn.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bits/libc-lock.h>
-#include <ldsodefs.h>
-#include <sys/types.h>
-#include <sys/mman.h>
-
-
-/* Type of the constructor functions.  */
-typedef void (*fini_t) (void);
-
-
-void
-internal_function
-_dl_close (void *_map)
-{
-  struct reldep_list
-  {
-    struct link_map **rellist;
-    unsigned int nrellist;
-    struct reldep_list *next;
-  } *reldeps = NULL;
-  struct link_map **list;
-  struct link_map *map = _map;
-  unsigned int i;
-  unsigned int *new_opencount;
-
-  /* First see whether we can remove the object at all.  */
-  if (__builtin_expect (map->l_flags_1 & DF_1_NODELETE, 0)
-      && map->l_init_called)
-    /* Nope.  Do nothing.  */
-    return;
-
-  if (__builtin_expect (map->l_opencount, 1) == 0)
-    _dl_signal_error (0, map->l_name, NULL, N_("shared object not open"));
-
-  /* Acquire the lock.  */
-#ifdef HAVE_DD_LOCK
-    __lock_acquire(_dl_load_lock);
-#endif
-
-
-  /* Decrement the reference count.  */
-  if (map->l_opencount > 1 || map->l_type != lt_loaded)
-    {
-      /* There are still references to this object.  Do nothing more.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-	_dl_debug_printf ("\nclosing file=%s; opencount == %u\n",
-			  map->l_name, map->l_opencount);
-
-      /* One decrement the object itself, not the dependencies.  */
-      --map->l_opencount;
-
-#ifdef HAVE_DD_LOCK
-        __lock_release(_dl_load_lock);
-#endif
-
-      return;
-    }
-
-  list = map->l_initfini;
-
-  /* Compute the new l_opencount values.  */
-  i = map->l_searchlist.r_nlist;
-  if (__builtin_expect (i == 0, 0))
-    /* This can happen if we handle relocation dependencies for an
-       object which wasn't loaded directly.  */
-    for (i = 1; list[i] != NULL; ++i)
-      ;
-
-  new_opencount = (unsigned int *) alloca (i * sizeof (unsigned int));
-
-  for (i = 0; list[i] != NULL; ++i)
-    {
-      list[i]->l_idx = i;
-      new_opencount[i] = list[i]->l_opencount;
-    }
-  --new_opencount[0];
-  for (i = 1; list[i] != NULL; ++i)
-    if ((! (list[i]->l_flags_1 & DF_1_NODELETE) || ! list[i]->l_init_called)
-	/* Decrement counter.  */
-	&& --new_opencount[i] == 0
-	/* Test whether this object was also loaded directly.  */
-	&& list[i]->l_searchlist.r_list != NULL)
-      {
-	/* In this case we have the decrement all the dependencies of
-           this object.  They are all in MAP's dependency list.  */
-	unsigned int j;
-	struct link_map **dep_list = list[i]->l_searchlist.r_list;
-
-	for (j = 1; j < list[i]->l_searchlist.r_nlist; ++j)
-	  if (! (dep_list[j]->l_flags_1 & DF_1_NODELETE)
-	      || ! dep_list[j]->l_init_called)
-	    {
-	      assert (dep_list[j]->l_idx < map->l_searchlist.r_nlist);
-	      --new_opencount[dep_list[j]->l_idx];
-	    }
-      }
-  assert (new_opencount[0] == 0);
-
-  /* Call all termination functions at once.  */
-  for (i = 0; list[i] != NULL; ++i)
-    {
-      struct link_map *imap = list[i];
-      if (new_opencount[i] == 0 && imap->l_type == lt_loaded
-	  && (imap->l_info[DT_FINI] || imap->l_info[DT_FINI_ARRAY])
-	  && (! (imap->l_flags_1 & DF_1_NODELETE) || ! imap->l_init_called)
-	  /* Skip any half-cooked objects that were never initialized.  */
-	  && imap->l_init_called)
-	{
-	  /* When debugging print a message first.  */
-	  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_IMPCALLS, 0))
-	    _dl_debug_printf ("\ncalling fini: %s\n\n", imap->l_name);
-
-	  /* Call its termination function.  */
-	  if (imap->l_info[DT_FINI_ARRAY] != NULL)
-	    {
-	      ElfW(Addr) *array =
-		(ElfW(Addr) *) (imap->l_addr
-				+ imap->l_info[DT_FINI_ARRAY]->d_un.d_ptr);
-	      unsigned int sz = (imap->l_info[DT_FINI_ARRAYSZ]->d_un.d_val
-				 / sizeof (ElfW(Addr)));
-	      unsigned int cnt;
-
-	      for (cnt = 0; cnt < sz; ++cnt)
-		((fini_t) (imap->l_addr + array[cnt])) ();
-	    }
-
-	  /* Next try the old-style destructor.  */
-	  if (imap->l_info[DT_FINI] != NULL)
-	    (*(void (*) (void)) DL_DT_FINI_ADDRESS
-	      (imap, (void *) imap->l_addr
-		     + imap->l_info[DT_FINI]->d_un.d_ptr)) ();
-	}
-      else if (new_opencount[i] != 0 && imap->l_type == lt_loaded)
-	{
-	  /* The object is still used.  But the object we are unloading
-	     right now is responsible for loading it and therefore we
-	     have the search list of the current object in its scope.
-	     Remove it.  */
-	  struct r_scope_elem **runp = imap->l_scope;
-
-	  while (*runp != NULL)
-	    if (*runp == &map->l_searchlist)
-	      {
-		/* Copy all later elements.  */
-		while ((runp[0] = runp[1]) != NULL)
-		  ++runp;
-		break;
-	      }
-	  else
-	    ++runp;
-	}
-
-      /* Store the new l_opencount value.  */
-      imap->l_opencount = new_opencount[i];
-      /* Just a sanity check.  */
-      assert (imap->l_type == lt_loaded || imap->l_opencount > 0);
-    }
-
-  /* Notify the debugger we are about to remove some loaded objects.  */
-  _r_debug.r_state = RT_DELETE;
-  _dl_debug_state ();
-
-  /* Check each element of the search list to see if all references to
-     it are gone.  */
-  for (i = 0; list[i] != NULL; ++i)
-    {
-      struct link_map *imap = list[i];
-      if (imap->l_opencount == 0 && imap->l_type == lt_loaded)
-	{
-	  struct libname_list *lnp;
-
-	  /* That was the last reference, and this was a dlopen-loaded
-	     object.  We can unmap it.  */
-	  if (__builtin_expect (imap->l_global, 0))
-	    {
-	      /* This object is in the global scope list.  Remove it.  */
-	      unsigned int cnt = _dl_main_searchlist->r_nlist;
-
-	      do
-		--cnt;
-	      while (_dl_main_searchlist->r_list[cnt] != imap);
-
-	      /* The object was already correctly registered.  */
-	      while (++cnt < _dl_main_searchlist->r_nlist)
-		_dl_main_searchlist->r_list[cnt - 1]
-		  = _dl_main_searchlist->r_list[cnt];
-
-	      --_dl_main_searchlist->r_nlist;
-	    }
-
-	  /* We can unmap all the maps at once.  We determined the
-	     start address and length when we loaded the object and
-	     the `munmap' call does the rest.  */
-	  DL_UNMAP (imap);
-
-	  /* Finally, unlink the data structure and free it.  */
-#ifdef SHARED
-	  /* We will unlink the first object only if this is a statically
-	     linked program.  */
-	  assert (imap->l_prev != NULL);
-	  imap->l_prev->l_next = imap->l_next;
-#else
-	  if (imap->l_prev != NULL)
-	    imap->l_prev->l_next = imap->l_next;
-	  else
-	    _dl_loaded = imap->l_next;
-#endif
-	  --_dl_nloaded;
-	  if (imap->l_next)
-	    imap->l_next->l_prev = imap->l_prev;
-
-	  if (imap->l_versions != NULL)
-	    free (imap->l_versions);
-	  if (imap->l_origin != NULL && imap->l_origin != (char *) -1)
-	    free ((char *) imap->l_origin);
-
-	  /* If the object has relocation dependencies save this
-             information for latter.  */
-	  if (__builtin_expect (imap->l_reldeps != NULL, 0))
-	    {
-	      struct reldep_list *newrel;
-
-	      newrel = (struct reldep_list *) alloca (sizeof (*reldeps));
-	      newrel->rellist = imap->l_reldeps;
-	      newrel->nrellist = imap->l_reldepsact;
-	      newrel->next = reldeps;
-
-	      reldeps = newrel;
-	    }
-
-	  /* This name always is allocated.  */
-	  free (imap->l_name);
-	  /* Remove the list with all the names of the shared object.  */
-	  lnp = imap->l_libname;
-	  do
-	    {
-	      struct libname_list *this = lnp;
-	      lnp = lnp->next;
-	      if (!this->dont_free)
-		free (this);
-	    }
-	  while (lnp != NULL);
-
-	  /* Remove the searchlists.  */
-	  if (imap != map)
-	      free (imap->l_initfini);
-
-	  /* Remove the scope array if we allocated it.  */
-	  if (imap->l_scope != imap->l_scope_mem)
-	    free (imap->l_scope);
-
-	  if (imap->l_phdr_allocated)
-	    free ((void *) imap->l_phdr);
-
-	  if (imap->l_rpath_dirs.dirs != (void *) -1)
-	    free (imap->l_rpath_dirs.dirs);
-	  if (imap->l_runpath_dirs.dirs != (void *) -1)
-	    free (imap->l_runpath_dirs.dirs);
-
-	  free (imap);
-	}
-    }
-
-  /* Notify the debugger those objects are finalized and gone.  */
-  _r_debug.r_state = RT_CONSISTENT;
-  _dl_debug_state ();
-
-  /* Now we can perhaps also remove the modules for which we had
-     dependencies because of symbol lookup.  */
-  while (__builtin_expect (reldeps != NULL, 0))
-    {
-      while (reldeps->nrellist-- > 0)
-	_dl_close (reldeps->rellist[reldeps->nrellist]);
-
-      free (reldeps->rellist);
-
-      reldeps = reldeps->next;
-    }
-
-  free (list);
-
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-    __lock_release(_dl_load_lock);
-#endif
-
-  
-}
-
-
-static void
-free_mem (void)
-{
-  if (__builtin_expect (_dl_global_scope_alloc, 0) != 0
-      && _dl_main_searchlist->r_nlist == _dl_initial_searchlist.r_nlist)
-    {
-      /* All object dynamically loaded by the program are unloaded.  Free
-	 the memory allocated for the global scope variable.  */
-      struct link_map **old = _dl_main_searchlist->r_list;
-
-      /* Put the old map in.  */
-      _dl_main_searchlist->r_list = _dl_initial_searchlist.r_list;
-      /* Signal that the original map is used.  */
-      _dl_global_scope_alloc = 0;
-
-      /* Now free the old map.  */
-      free (old);
-    }
-}
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/dl/dl-debug.c b/newlib/libc/sys/linux/dl/dl-debug.c
deleted file mode 100644
index 5a51b5335..000000000
--- a/newlib/libc/sys/linux/dl/dl-debug.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Communicate dynamic linker state to the debugger at runtime.
-   Copyright (C) 1996, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <ldsodefs.h>
-
-/* This structure communicates dl state to the debugger.  The debugger
-   normally finds it via the DT_DEBUG entry in the dynamic section, but in
-   a statically-linked program there is no dynamic section for the debugger
-   to examine and it looks for this particular symbol name.  */
-struct r_debug _r_debug;
-
-
-/* Initialize _r_debug if it has not already been done.  The argument is
-   the run-time load address of the dynamic linker, to be put in
-   _r_debug.r_ldbase.  Returns the address of _r_debug.  */
-
-struct r_debug *
-internal_function
-_dl_debug_initialize (ElfW(Addr) ldbase)
-{
-  if (_r_debug.r_brk == 0)
-    {
-      /* Tell the debugger where to find the map of loaded objects.  */
-      _r_debug.r_version = 1	/* R_DEBUG_VERSION XXX */;
-      _r_debug.r_ldbase = ldbase;
-      _r_debug.r_map = _dl_loaded;
-      _r_debug.r_brk = (ElfW(Addr)) &_dl_debug_state;
-    }
-
-  return &_r_debug;
-}
-
-
-/* This function exists solely to have a breakpoint set on it by the
-   debugger.  The debugger is supposed to find this function's address by
-   examining the r_brk member of struct r_debug, but GDB 4.15 in fact looks
-   for this particular symbol name in the PT_INTERP file.  */
-void
-_dl_debug_state (void)
-{
-}
diff --git a/newlib/libc/sys/linux/dl/dl-deps.c b/newlib/libc/sys/linux/dl/dl-deps.c
deleted file mode 100644
index 4596a85d7..000000000
--- a/newlib/libc/sys/linux/dl/dl-deps.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/* Load the dependencies of a mapped object.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <dlfcn.h>
-#include <errno.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <ldsodefs.h>
-
-#include <dl-dst.h>
-
-/* Whether an shared object references one or more auxiliary objects
-   is signaled by the AUXTAG entry in l_info.  */
-#define AUXTAG	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGNUM \
-		 + DT_EXTRATAGIDX (DT_AUXILIARY))
-/* Whether an shared object references one or more auxiliary objects
-   is signaled by the AUXTAG entry in l_info.  */
-#define FILTERTAG (DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGNUM \
-		   + DT_EXTRATAGIDX (DT_FILTER))
-
-/* This is zero at program start to signal that the global scope map is
-   allocated by rtld.  Later it keeps the size of the map.  It might be
-   reset if in _dl_close if the last global object is removed.  */
-size_t _dl_global_scope_alloc;
-
-extern size_t _dl_platformlen;
-
-/* When loading auxiliary objects we must ignore errors.  It's ok if
-   an object is missing.  */
-struct openaux_args
-  {
-    /* The arguments to openaux.  */
-    struct link_map *map;
-    int trace_mode;
-    const char *strtab;
-    const char *name;
-
-    /* The return value of openaux.  */
-    struct link_map *aux;
-  };
-
-static void
-openaux (void *a)
-{
-  struct openaux_args *args = (struct openaux_args *) a;
-
-  args->aux = _dl_map_object (args->map, args->name, 0,
-			      (args->map->l_type == lt_executable
-			       ? lt_library : args->map->l_type),
-			      args->trace_mode, 0);
-}
-
-
-
-/* We use a very special kind of list to track the path
-   through the list of loaded shared objects.  We have to
-   produce a flat list with unique members of all involved objects.
-*/
-struct list
-  {
-    int done;			/* Nonzero if this map was processed.  */
-    struct link_map *map;	/* The data.  */
-    struct list *next;	/* Elements for normal list.  */
-  };
-
-
-/* Macro to expand DST.  It is an macro since we use `alloca'.  */
-#define expand_dst(l, str, fatal) \
-  ({									      \
-    const char *__str = (str);						      \
-    const char *__result = __str;					      \
-    size_t __cnt = DL_DST_COUNT(__str, 0);				      \
-									      \
-    if (__cnt != 0)							      \
-      {									      \
-	char *__newp;							      \
-									      \
-	__newp = (char *) alloca (DL_DST_REQUIRED (l, __str, strlen (__str),  \
-						   __cnt));		      \
-									      \
-	__result = DL_DST_SUBSTITUTE (l, __str, __newp, 0);		      \
-									      \
-	if (*__result == '\0')						      \
-	  {								      \
-	    /* The replacement for the DST is not known.  We can't	      \
-	       processed.  */						      \
-	    if (fatal)							      \
-	      _dl_signal_error (0, __str, NULL, N_("\
-empty dynamics string token substitution"));				      \
-	    else							      \
-	      {								      \
-		/* This is for DT_AUXILIARY.  */			      \
-		if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))     \
-		  _dl_debug_printf ("cannot load auxiliary `%s' because of"   \
-				    "empty dynamic string token "	      \
-				    "substitution\n", __str);		      \
-		continue;						      \
-	      }								      \
-	  }								      \
-      }									      \
-									      \
-    __result; })
-
-
-void
-internal_function
-_dl_map_object_deps (struct link_map *map,
-		     struct link_map **preloads, unsigned int npreloads,
-		     int trace_mode)
-{
-  struct list known[1 + npreloads + 1];
-  struct list *runp, *tail;
-  unsigned int nlist, i;
-  /* Object name.  */
-  const char *name;
-  int errno_saved;
-  int errno_reason;
-  const char *errstring;
-  const char *objname;
-
-  auto inline void preload (struct link_map *map);
-
-  inline void preload (struct link_map *map)
-    {
-      known[nlist].done = 0;
-      known[nlist].map = map;
-      known[nlist].next = &known[nlist + 1];
-
-      ++nlist;
-      /* We use `l_reserved' as a mark bit to detect objects we have
-	 already put in the search list and avoid adding duplicate
-	 elements later in the list.  */
-      map->l_reserved = 1;
-    }
-
-  /* No loaded object so far.  */
-  nlist = 0;
-
-  /* First load MAP itself.  */
-  preload (map);
-
-  /* Add the preloaded items after MAP but before any of its dependencies.  */
-  for (i = 0; i < npreloads; ++i)
-    preload (preloads[i]);
-
-  /* Terminate the lists.  */
-  known[nlist - 1].next = NULL;
-
-  /* Pointer to last unique object.  */
-  tail = &known[nlist - 1];
-
-  /* Process each element of the search list, loading each of its
-     auxiliary objects and immediate dependencies.  Auxiliary objects
-     will be added in the list before the object itself and
-     dependencies will be appended to the list as we step through it.
-     This produces a flat, ordered list that represents a
-     breadth-first search of the dependency tree.
-
-     The whole process is complicated by the fact that we better
-     should use alloca for the temporary list elements.  But using
-     alloca means we cannot use recursive function calls.  */
-  errno_saved = errno;
-  errno_reason = 0;
-  errstring = NULL;
-  errno = 0;
-  name = NULL;
-  for (runp = known; runp; )
-    {
-      struct link_map *l = runp->map;
-      struct link_map **needed = NULL;
-      unsigned int nneeded = 0;
-
-      /* Unless otherwise stated, this object is handled.  */
-      runp->done = 1;
-
-      /* Allocate a temporary record to contain the references to the
-	 dependencies of this object.  */
-      if (l->l_searchlist.r_list == NULL && l->l_initfini == NULL
-	  && l != map && l->l_ldnum > 0)
-	needed = (struct link_map **) alloca (l->l_ldnum
-					      * sizeof (struct link_map *));
-
-      if (l->l_info[DT_NEEDED] || l->l_info[AUXTAG] || l->l_info[FILTERTAG])
-	{
-	  const char *strtab = (const void *) D_PTR (l, l_info[DT_STRTAB]);
-	  struct openaux_args args;
-	  struct list *orig;
-	  const ElfW(Dyn) *d;
-
-	  args.strtab = strtab;
-	  args.map = l;
-	  args.trace_mode = trace_mode;
-	  orig = runp;
-
-	  for (d = l->l_ld; d->d_tag != DT_NULL; ++d)
-	    if (__builtin_expect (d->d_tag, DT_NEEDED) == DT_NEEDED)
-	      {
-		/* Map in the needed object.  */
-		struct link_map *dep;
-		int err;
-
-		/* Recognize DSTs.  */
-		name = expand_dst (l, strtab + d->d_un.d_val, 0);
-		/* Store the tag in the argument structure.  */
-		args.name = name;
-
-		err = _dl_catch_error (&objname, &errstring, openaux, &args);
-		if (__builtin_expect (errstring != NULL, 0))
-		  {
-		    if (err)
-		      errno_reason = err;
-		    else
-		      errno_reason = -1;
-		    goto out;
-		  }
-		else
-		  dep = args.aux;
-
-		if (! dep->l_reserved)
-		  {
-		    /* Allocate new entry.  */
-		    struct list *newp;
-
-		    newp = alloca (sizeof (struct list));
-
-		    /* Append DEP to the list.  */
-		    newp->map = dep;
-		    newp->done = 0;
-		    newp->next = NULL;
-		    tail->next = newp;
-		    tail = newp;
-		    ++nlist;
-		    /* Set the mark bit that says it's already in the list.  */
-		    dep->l_reserved = 1;
-		  }
-
-		/* Remember this dependency.  */
-		if (needed != NULL)
-		  needed[nneeded++] = dep;
-	      }
-	    else if (d->d_tag == DT_AUXILIARY || d->d_tag == DT_FILTER)
-	      {
-		struct list *newp;
-
-		/* Recognize DSTs.  */
-		name = expand_dst (l, strtab + d->d_un.d_val,
-				   d->d_tag == DT_AUXILIARY);
-		/* Store the tag in the argument structure.  */
-		args.name = name;
-
-		if (d->d_tag == DT_AUXILIARY)
-		  {
-		    int err;
-
-		    /* Say that we are about to load an auxiliary library.  */
-		    if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))
-		      _dl_debug_printf ("load auxiliary object=%s"
-					" requested by file=%s\n", name,
-					l->l_name[0]
-					? l->l_name : _dl_argv[0]);
-
-		    /* We must be prepared that the addressed shared
-		       object is not available.  */
-		    err = _dl_catch_error (&objname, &errstring, openaux,
-					   &args);
-		    if (__builtin_expect (errstring != NULL, 0))
-		      {
-			/* We are not interested in the error message.  */
-			assert (errstring != NULL);
-			if (errstring != _dl_out_of_memory)
-			  free ((char *) errstring);
-
-			/* Simply ignore this error and continue the work.  */
-			continue;
-		      }
-		  }
-		else
-		  {
-		    int err;
-
-		    /* Say that we are about to load an auxiliary library.  */
-		    if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))
-		      _dl_debug_printf ("load filtered object=%s"
-					" requested by file=%s\n", name,
-					l->l_name[0]
-					? l->l_name : _dl_argv[0]);
-
-		    /* For filter objects the dependency must be available.  */
-		    err = _dl_catch_error (&objname, &errstring, openaux,
-					   &args);
-		    if (__builtin_expect (errstring != NULL, 0))
-		      {
-			if (err)
-			  errno_reason = err;
-			else
-			  errno_reason = -1;
-			goto out;
-		      }
-		  }
-
-		/* The auxiliary object is actually available.
-		   Incorporate the map in all the lists.  */
-
-		/* Allocate new entry.  This always has to be done.  */
-		newp = alloca (sizeof (struct list));
-
-		/* We want to insert the new map before the current one,
-		   but we have no back links.  So we copy the contents of
-		   the current entry over.  Note that ORIG and NEWP now
-		   have switched their meanings.  */
-		memcpy (newp, orig, sizeof (*newp));
-
-		/* Initialize new entry.  */
-		orig->done = 0;
-		orig->map = args.aux;
-
-		/* Remember this dependency.  */
-		if (needed != NULL)
-		  needed[nneeded++] = args.aux;
-
-		/* We must handle two situations here: the map is new,
-		   so we must add it in all three lists.  If the map
-		   is already known, we have two further possibilities:
-		   - if the object is before the current map in the
-		   search list, we do nothing.  It is already found
-		   early
-		   - if the object is after the current one, we must
-		   move it just before the current map to make sure
-		   the symbols are found early enough
-		*/
-		if (args.aux->l_reserved)
-		  {
-		    /* The object is already somewhere in the list.
-		       Locate it first.  */
-		    struct list *late;
-
-		    /* This object is already in the search list we
-		       are building.  Don't add a duplicate pointer.
-		       Just added by _dl_map_object.  */
-		    for (late = newp; late->next != NULL; late = late->next)
-		      if (late->next->map == args.aux)
-			break;
-
-		    if (late->next != NULL)
-		      {
-			/* The object is somewhere behind the current
-			   position in the search path.  We have to
-			   move it to this earlier position.  */
-			orig->next = newp;
-
-			/* Now remove the later entry from the list
-			   and adjust the tail pointer.  */
-			if (tail == late->next)
-			  tail = late;
-			late->next = late->next->next;
-
-			/* We must move the object earlier in the chain.  */
-			if (args.aux->l_prev != NULL)
-			  args.aux->l_prev->l_next = args.aux->l_next;
-			if (args.aux->l_next != NULL)
-			  args.aux->l_next->l_prev = args.aux->l_prev;
-
-			args.aux->l_prev = newp->map->l_prev;
-			newp->map->l_prev = args.aux;
-			if (args.aux->l_prev != NULL)
-			  args.aux->l_prev->l_next = args.aux;
-			args.aux->l_next = newp->map;
-		      }
-		    else
-		      {
-			/* The object must be somewhere earlier in the
-			   list.  Undo to the current list element what
-			   we did above.  */
-			memcpy (orig, newp, sizeof (*newp));
-			continue;
-		      }
-		  }
-		else
-		  {
-		    /* This is easy.  We just add the symbol right here.  */
-		    orig->next = newp;
-		    ++nlist;
-		    /* Set the mark bit that says it's already in the list.  */
-		    args.aux->l_reserved = 1;
-
-		    /* The only problem is that in the double linked
-		       list of all objects we don't have this new
-		       object at the correct place.  Correct this here.  */
-		    if (args.aux->l_prev)
-		      args.aux->l_prev->l_next = args.aux->l_next;
-		    if (args.aux->l_next)
-		      args.aux->l_next->l_prev = args.aux->l_prev;
-
-		    args.aux->l_prev = newp->map->l_prev;
-		    newp->map->l_prev = args.aux;
-		    if (args.aux->l_prev != NULL)
-		      args.aux->l_prev->l_next = args.aux;
-		    args.aux->l_next = newp->map;
-		  }
-
-		/* Move the tail pointer if necessary.  */
-		if (orig == tail)
-		  tail = newp;
-
-		/* Move on the insert point.  */
-		orig = newp;
-	      }
-	}
-
-      /* Terminate the list of dependencies and store the array address.  */
-      if (needed != NULL)
-	{
-	  needed[nneeded++] = NULL;
-
-	  l->l_initfini = (struct link_map **)
-	    malloc ((nneeded + 1) * sizeof needed[0]);
-	  if (l->l_initfini == NULL)
-	    _dl_signal_error (ENOMEM, map->l_name, NULL,
-			      N_("cannot allocate dependency list"));
-	  l->l_initfini[0] = l;
-	  memcpy (&l->l_initfini[1], needed, nneeded * sizeof needed[0]);
-	}
-
-      /* If we have no auxiliary objects just go on to the next map.  */
-      if (runp->done)
-	do
-	  runp = runp->next;
-	while (runp != NULL && runp->done);
-    }
-
- out:
-  if (errno == 0 && errno_saved != 0)
-    __set_errno (errno_saved);
-
-  if (map->l_initfini != NULL && map->l_type == lt_loaded)
-    {
-      /* This object was previously loaded as a dependency and we have
-	 a separate l_initfini list.  We don't need it anymore.  */
-      assert (map->l_searchlist.r_list == NULL);
-      free (map->l_initfini);
-    }
-
-  /* Store the search list we built in the object.  It will be used for
-     searches in the scope of this object.  */
-  map->l_initfini =
-    (struct link_map **) malloc ((2 * nlist + 1)
-				 * sizeof (struct link_map *));
-  if (map->l_initfini == NULL)
-    _dl_signal_error (ENOMEM, map->l_name, NULL,
-		      N_("cannot allocate symbol search list"));
-
-
-  map->l_searchlist.r_list = &map->l_initfini[nlist + 1];
-  map->l_searchlist.r_nlist = nlist;
-
-  for (nlist = 0, runp = known; runp; runp = runp->next)
-    {
-      if (__builtin_expect (trace_mode, 0) && runp->map->l_faked)
-	/* This can happen when we trace the loading.  */
-	--map->l_searchlist.r_nlist;
-      else
-	map->l_searchlist.r_list[nlist++] = runp->map;
-
-      /* Now clear all the mark bits we set in the objects on the search list
-	 to avoid duplicates, so the next call starts fresh.  */
-      runp->map->l_reserved = 0;
-    }
-
-  /* Maybe we can remove some relocation dependencies now.  */
-  assert (map->l_searchlist.r_list[0] == map);
-  for (i = 0; i < map->l_reldepsact; ++i)
-    {
-      unsigned int j;
-
-      for (j = 1; j < nlist; ++j)
-	if (map->l_searchlist.r_list[j] == map->l_reldeps[i])
-	  {
-	    /* A direct or transitive dependency is also on the list
-	       of relocation dependencies.  Remove the latter.  */
-	    --map->l_reldeps[i]->l_opencount;
-
-	    for (j = i + 1; j < map->l_reldepsact; ++j)
-	      map->l_reldeps[j - 1] = map->l_reldeps[j];
-
-	    --map->l_reldepsact;
-
-	    /* Account for the '++i' performed by the 'for'.  */
-	    --i;
-	    break;
-	  }
-    }
-
-  /* Now determine the order in which the initialization has to happen.  */
-  memcpy (map->l_initfini, map->l_searchlist.r_list,
-	  nlist * sizeof (struct link_map *));
-  /* We can skip looking for the binary itself which is at the front
-     of the search list.  Look through the list backward so that circular
-     dependencies are not changing the order.  */
-  for (i = 1; i < nlist; ++i)
-    {
-      struct link_map *l = map->l_searchlist.r_list[i];
-      unsigned int j;
-      unsigned int k;
-
-      /* Find the place in the initfini list where the map is currently
-	 located.  */
-      for (j = 1; map->l_initfini[j] != l; ++j)
-	;
-
-      /* Find all object for which the current one is a dependency and
-	 move the found object (if necessary) in front.  */
-      for (k = j + 1; k < nlist; ++k)
-	{
-	  struct link_map **runp;
-
-	  runp = map->l_initfini[k]->l_initfini;
-	  if (runp != NULL)
-	    {
-	      while (*runp != NULL)
-		if (__builtin_expect (*runp++ == l, 0))
-		  {
-		    struct link_map *here = map->l_initfini[k];
-
-		    /* Move it now.  */
-		    memmove (&map->l_initfini[j] + 1,
-			     &map->l_initfini[j],
-			     (k - j) * sizeof (struct link_map *));
-		    map->l_initfini[j] = here;
-
-		    break;
-		  }
-	    }
-	}
-    }
-  /* Terminate the list of dependencies.  */
-  map->l_initfini[nlist] = NULL;
-
-  if (errno_reason)
-    _dl_signal_error (errno_reason == -1 ? 0 : errno_reason,
-		      objname, NULL, errstring);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-dst.h b/newlib/libc/sys/linux/dl/dl-dst.h
deleted file mode 100644
index ccebf9259..000000000
--- a/newlib/libc/sys/linux/dl/dl-dst.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Handling of dynamic sring tokens.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Determine the number of DST elements in the name.  Only if IS_PATH is
-   nonzero paths are recognized (i.e., multiple, ':' separated filenames).  */
-#define DL_DST_COUNT(name, is_path) \
-  ({									      \
-    size_t __cnt = 0;							      \
-    const char *__sf = strchr (name, '$');				      \
-									      \
-    if (__builtin_expect (__sf != NULL, 0))				      \
-      __cnt = _dl_dst_count (__sf, is_path);				      \
-									      \
-    __cnt; })
-
-/* Prototype for used function.  */
-extern size_t _dl_dst_count (const char *name, int is_path);
-
-
-/* Guess from the number of DSTs the length of the result string.  */
-#define DL_DST_REQUIRED(l, name, len, cnt) 1024
-
-/* Perform the DST substitution.  */
-#define DL_DST_SUBSTITUTE(l, name, res, is_path) \
-  _dl_dst_substitute (l, name, res, is_path)
-
-/* Prototype for used function.  */
-extern char *_dl_dst_substitute (struct link_map *l, const char *name,
-				 char *result, int is_path);
diff --git a/newlib/libc/sys/linux/dl/dl-error.c b/newlib/libc/sys/linux/dl/dl-error.c
deleted file mode 100644
index 9c0f55f7f..000000000
--- a/newlib/libc/sys/linux/dl/dl-error.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* Error handling for runtime dynamic linker.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <libintl.h>
-#include <setjmp.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include <sys/libc-tsd.h>
-
-/* This structure communicates state between _dl_catch_error and
-   _dl_signal_error.  */
-struct catch
-  {
-    const char *objname;	/* Object/File name.  */
-    const char *errstring;	/* Error detail filled in here.  */
-    jmp_buf env;		/* longjmp here on error.  */
-  };
-
-/* Multiple threads at once can use the `_dl_catch_error' function.  The
-   calls can come from `_dl_map_object_deps', `_dlerror_run', or from
-   any of the libc functionality which loads dynamic objects (NSS, iconv).
-   Therefore we have to be prepared to save the state in thread-local
-   memory.  */
-
-__libc_tsd_define (static, DL_ERROR)
-#define tsd_getspecific()	__libc_tsd_get (DL_ERROR)
-#define tsd_setspecific(data)	__libc_tsd_set (DL_ERROR, (data))
-
-
-/* This message we return as a last resort.  We define the string in a
-   variable since we have to avoid freeing it and so have to enable
-   a pointer comparison.  See below and in dlfcn/dlerror.c.  */
-const char _dl_out_of_memory[] = "out of memory";
-
-
-/* This points to a function which is called when an continuable error is
-   received.  Unlike the handling of `catch' this function may return.
-   The arguments will be the `errstring' and `objname'.
-
-   Since this functionality is not used in normal programs (only in ld.so)
-   we do not care about multi-threaded programs here.  We keep this as a
-   global variable.  */
-static receiver_fct receiver;
-
-
-void
-internal_function
-_dl_signal_error (int errcode, const char *objname, const char *occation,
-		  const char *errstring)
-{
-  struct catch *lcatch;
-
-  if (! errstring)
-    errstring = N_("DYNAMIC LINKER BUG!!!");
-
-  lcatch = tsd_getspecific ();
-  if (objname == NULL)
-    objname = "";
-  if (lcatch != NULL)
-    {
-      /* We are inside _dl_catch_error.  Return to it.  We have to
-	 duplicate the error string since it might be allocated on the
-	 stack.  The object name is always a string constant.  */
-      size_t len_objname = strlen (objname) + 1;
-      size_t len_errstring = strlen (errstring) + 1;
-
-      lcatch->errstring = (char *) malloc (len_objname + len_errstring);
-      if (lcatch->errstring != NULL)
-        {
-          char *tmp;
-          /* Make a copy of the object file name and the error string.  */
-          tmp = memcpy ((char *) lcatch->errstring,
-                           errstring, len_errstring);
-          tmp += len_errstring;
-          lcatch->objname = memcpy (tmp,
-				  objname, len_objname);
-        }
-      else
-	{
-	  /* This is better than nothing.  */
-	  lcatch->objname = "";
-	  lcatch->errstring = _dl_out_of_memory;
-	}
-      longjmp (lcatch->env, errcode ?: -1);
-    }
-  else
-    {
-      /* Lossage while resolving the program's own symbols is always fatal.  */
-      char buffer[1024];
-      _dl_fatal_printf ("%s: %s: %s%s%s%s%s\n",
-			_dl_argv[0] ?: "<program name unknown>",
-			occation ?: N_("error while loading shared libraries"),
-			objname, *objname ? ": " : "",
-			errstring, errcode ? ": " : "",
-			(errcode
-			 ? __strerror_r (errcode, buffer, sizeof buffer)
-			 : ""));
-    }
-}
-
-
-void
-internal_function
-_dl_signal_cerror (int errcode, const char *objname, const char *occation,
-		   const char *errstring)
-{
-  if (receiver)
-    {
-      /* We are inside _dl_receive_error.  Call the user supplied
-	 handler and resume the work.  The receiver will still be
-	 installed.  */
-      (*receiver) (errcode, objname, errstring);
-    }
-  else
-    _dl_signal_error (errcode, objname, occation, errstring);
-}
-
-
-int
-internal_function
-_dl_catch_error (const char **objname, const char **errstring,
-		 void (*operate) (void *), void *args)
-{
-  int errcode;
-  struct catch *volatile old;
-  struct catch c;
-  /* We need not handle `receiver' since setting a `catch' is handled
-     before it.  */
-
-  /* Some systems (e.g., SPARC) handle constructors to local variables
-     inefficient.  So we initialize `c' by hand.  */
-  c.errstring = NULL;
-
-  old = tsd_getspecific ();
-  errcode = setjmp (c.env);
-  if (__builtin_expect (errcode, 0) == 0)
-    {
-      tsd_setspecific (&c);
-      (*operate) (args);
-      tsd_setspecific (old);
-      *objname = NULL;
-      *errstring = NULL;
-      return 0;
-    }
-
-  /* We get here only if we longjmp'd out of OPERATE.  */
-  tsd_setspecific (old);
-  *objname = c.objname;
-  *errstring = c.errstring;
-  return errcode == -1 ? 0 : errcode;
-}
-
-void
-internal_function
-_dl_receive_error (receiver_fct fct, void (*operate) (void *), void *args)
-{
-  struct catch *old_catch;
-  receiver_fct old_receiver;
-
-  old_catch = tsd_getspecific ();
-  old_receiver = receiver;
-
-  /* Set the new values.  */
-  tsd_setspecific (NULL);
-  receiver = fct;
-
-  (*operate) (args);
-
-  tsd_setspecific (old_catch);
-  receiver = old_receiver;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-fini.c b/newlib/libc/sys/linux/dl/dl-fini.c
deleted file mode 100644
index fc4f4b68a..000000000
--- a/newlib/libc/sys/linux/dl/dl-fini.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* Call the termination functions of loaded shared objects.
-   Copyright (C) 1995,96,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <assert.h>
-#include <string.h>
-#include <ldsodefs.h>
-
-
-/* Type of the constructor functions.  */
-typedef void (*fini_t) (void);
-
-
-void
-internal_function
-_dl_fini (void)
-{
-  /* Lots of fun ahead.  We have to call the destructors for all still
-     loaded objects.  The problem is that the ELF specification now
-     demands that dependencies between the modules are taken into account.
-     I.e., the destructor for a module is called before the ones for any
-     of its dependencies.
-
-     To make things more complicated, we cannot simply use the reverse
-     order of the constructors.  Since the user might have loaded objects
-     using `dlopen' there are possibly several other modules with its
-     dependencies to be taken into account.  Therefore we have to start
-     determining the order of the modules once again from the beginning.  */
-  unsigned int i;
-  struct link_map *l;
-  struct link_map **maps;
-
-  /* XXX Could it be (in static binaries) that there is no object loaded?  */
-  assert (_dl_nloaded > 0);
-
-  /* Now we can allocate an array to hold all the pointers and copy
-     the pointers in.  */
-  maps = (struct link_map **) alloca (_dl_nloaded
-				      * sizeof (struct link_map *));
-  for (l = _dl_loaded, i = 0; l != NULL; l = l->l_next)
-    {
-      assert (i < _dl_nloaded);
-
-      maps[i++] = l;
-
-      /* Bump l_opencount of all objects so that they are not dlclose()ed
-	 from underneath us.  */
-      ++l->l_opencount;
-    }
-  assert (i == _dl_nloaded);
-
-  /* Now we have to do the sorting.  */
-  for (l = _dl_loaded->l_next; l != NULL; l = l->l_next)
-    {
-      unsigned int j;
-      unsigned int k;
-
-      /* Find the place in the `maps' array.  */
-      for (j = 1; maps[j] != l; ++j)
-	;
-
-      /* Find all object for which the current one is a dependency and
-	 move the found object (if necessary) in front.  */
-      for (k = j + 1; k < _dl_nloaded; ++k)
-	{
-	  struct link_map **runp;
-
-	  runp = maps[k]->l_initfini;
-	  if (runp != NULL)
-	    {
-	      while (*runp != NULL)
-		if (*runp == l)
-		  {
-		    struct link_map *here = maps[k];
-
-		    /* Move it now.  */
-		    memmove (&maps[j] + 1,
-			     &maps[j],
-			     (k - j) * sizeof (struct link_map *));
-		    maps[j++] = here;
-
-		    break;
-		  }
-		else
-		  ++runp;
-	    }
-
-	  if (__builtin_expect (maps[k]->l_reldeps != NULL, 0))
-	    {
-	      unsigned int m = maps[k]->l_reldepsact;
-	      struct link_map **relmaps = maps[k]->l_reldeps;
-
-	      while (m-- > 0)
-		{
-		  if (relmaps[m] == l)
-		    {
-		      struct link_map *here = maps[k];
-
-		      /* Move it now.  */
-		      memmove (&maps[j] + 1,
-			       &maps[j],
-			       (k - j) * sizeof (struct link_map *));
-		      maps[j] = here;
-
-		      break;
-		    }
-
-		}
-	    }
-	}
-    }
-
-  /* `maps' now contains the objects in the right order.  Now call the
-     destructors.  We have to process this array from the front.  */
-  for (i = 0; i < _dl_nloaded; ++i)
-    {
-      l = maps[i];
-
-      if (l->l_init_called)
-	{
-	  /* Make sure nothing happens if we are called twice.  */
-	  l->l_init_called = 0;
-
-	  /* Don't call the destructors for objects we are not supposed to.  */
-	  if (l->l_name[0] == '\0' && l->l_type == lt_executable)
-	    continue;
-
-	  /* Is there a destructor function?  */
-	  if (l->l_info[DT_FINI_ARRAY] == NULL && l->l_info[DT_FINI] == NULL)
-	    continue;
-
-	  /* When debugging print a message first.  */
-	  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_IMPCALLS, 0))
-	    _dl_debug_printf ("\ncalling fini: %s\n\n",
-			      l->l_name[0] ? l->l_name : _dl_argv[0]);
-
-	  /* First see whether an array is given.  */
-	  if (l->l_info[DT_FINI_ARRAY] != NULL)
-	    {
-	      ElfW(Addr) *array =
-		(ElfW(Addr) *) (l->l_addr
-				+ l->l_info[DT_FINI_ARRAY]->d_un.d_ptr);
-	      unsigned int sz = (l->l_info[DT_FINI_ARRAYSZ]->d_un.d_val
-				 / sizeof (ElfW(Addr)));
-	      unsigned int cnt;
-
-	      for (cnt = 0; cnt < sz; ++cnt)
-		((fini_t) (l->l_addr + array[cnt])) ();
-	    }
-
-	  /* Next try the old-style destructor.  */
-	  if (l->l_info[DT_FINI] != NULL)
-	    ((fini_t) DL_DT_FINI_ADDRESS (l, l->l_addr + l->l_info[DT_FINI]->d_un.d_ptr)) ();
-	}
-    }
-}
diff --git a/newlib/libc/sys/linux/dl/dl-init.c b/newlib/libc/sys/linux/dl/dl-init.c
deleted file mode 100644
index 5448b03c3..000000000
--- a/newlib/libc/sys/linux/dl/dl-init.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* Return the next shared object initializer function not yet run.
-   Copyright (C) 1995,1996,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <ldsodefs.h>
-
-
-/* Type of the initializer.  */
-typedef void (*init_t) (int, char **, char **);
-
-/* Flag, nonzero during startup phase.  */
-extern int _dl_starting_up;
-
-/* The object to be initialized first.  */
-extern struct link_map *_dl_initfirst;
-
-
-static void
-call_init (struct link_map *l, int argc, char **argv, char **env)
-{
-  if (l->l_init_called)
-    /* This object is all done.  */
-    return;
-
-  /* Avoid handling this constructor again in case we have a circular
-     dependency.  */
-  l->l_init_called = 1;
-
-  /* Check for object which constructors we do not run here.  */
-  if (__builtin_expect (l->l_name[0], 'a') == '\0'
-      && l->l_type == lt_executable)
-    return;
-
-  /* Are there any constructors?  */
-  if (l->l_info[DT_INIT] == NULL
-      && __builtin_expect (l->l_info[DT_INIT_ARRAY] == NULL, 1))
-    return;
-
-  /* Print a debug message if wanted.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_IMPCALLS, 0))
-    _dl_debug_printf ("\ncalling init: %s\n\n",
-		      l->l_name[0] ? l->l_name : _dl_argv[0]);
-
-  /* Now run the local constructors.  There are two forms of them:
-     - the one named by DT_INIT
-     - the others in the DT_INIT_ARRAY.
-  */
-  if (l->l_info[DT_INIT] != NULL)
-    {
-      init_t init = (init_t) DL_DT_INIT_ADDRESS
-	(l, l->l_addr + l->l_info[DT_INIT]->d_un.d_ptr);
-
-      /* Call the function.  */
-      init (argc, argv, env);
-    }
-
-  /* Next see whether there is an array with initialization functions.  */
-  if (l->l_info[DT_INIT_ARRAY] != NULL)
-    {
-      unsigned int j;
-      unsigned int jm;
-      ElfW(Addr) *addrs;
-
-      jm = l->l_info[DT_INIT_ARRAYSZ]->d_un.d_val / sizeof (ElfW(Addr));
-
-      addrs = (ElfW(Addr) *) (l->l_info[DT_INIT_ARRAY]->d_un.d_ptr
-			      + l->l_addr);
-      for (j = 0; j < jm; ++j)
-	((init_t) addrs[j]) (argc, argv, env);
-    }
-}
-
-
-void
-internal_function
-_dl_init (struct link_map *main_map, int argc, char **argv, char **env)
-{
-  ElfW(Dyn) *preinit_array = main_map->l_info[DT_PREINIT_ARRAY];
-  struct r_debug *r;
-  unsigned int i;
-
-  if (__builtin_expect (_dl_initfirst != NULL, 0))
-    {
-      call_init (_dl_initfirst, argc, argv, env);
-      _dl_initfirst = NULL;
-    }
-
-  /* Don't do anything if there is no preinit array.  */
-  if (__builtin_expect (preinit_array != NULL, 0)
-      && (i = preinit_array->d_un.d_val / sizeof (ElfW(Addr))) > 0)
-    {
-      ElfW(Addr) *addrs;
-      unsigned int cnt;
-
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_IMPCALLS, 0))
-	_dl_debug_printf ("\ncalling preinit: %s\n\n",
-			  main_map->l_name[0]
-			  ? main_map->l_name : _dl_argv[0]);
-
-      addrs = (ElfW(Addr) *) (main_map->l_info[DT_PREINIT_ARRAY]->d_un.d_ptr
-			      + main_map->l_addr);
-      for (cnt = 0; cnt < i; ++cnt)
-	((init_t) addrs[cnt]) (argc, argv, env);
-    }
-
-  /* Notify the debugger we have added some objects.  We need to call
-     _dl_debug_initialize in a static program in case dynamic linking has
-     not been used before.  */
-  r = _dl_debug_initialize (0);
-  r->r_state = RT_ADD;
-  _dl_debug_state ();
-
-  /* Stupid users forced the ELF specification to be changed.  It now
-     says that the dynamic loader is responsible for determining the
-     order in which the constructors have to run.  The constructors
-     for all dependencies of an object must run before the constructor
-     for the object itself.  Circular dependencies are left unspecified.
-
-     This is highly questionable since it puts the burden on the dynamic
-     loader which has to find the dependencies at runtime instead of
-     letting the user do it right.  Stupidity rules!  */
-
-  i = main_map->l_searchlist.r_nlist;
-  while (i-- > 0)
-    call_init (main_map->l_initfini[i], argc, argv, env);
-
-  /* Notify the debugger all new objects are now ready to go.  */
-  r->r_state = RT_CONSISTENT;
-  _dl_debug_state ();
-
-  /* Finished starting up.  */
-  _dl_starting_up = 0;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-iteratephdr.c b/newlib/libc/sys/linux/dl/dl-iteratephdr.c
deleted file mode 100644
index a39a4934e..000000000
--- a/newlib/libc/sys/linux/dl/dl-iteratephdr.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Get loaded objects program headers.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Jakub Jelinek <jakub@redhat.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <ldsodefs.h>
-#include <stddef.h>
-#include <bits/libc-lock.h>
-
-int
-__dl_iterate_phdr (int (*callback) (struct dl_phdr_info *info,
-				    size_t size, void *data), void *data)
-{
-  struct link_map *l;
-  struct dl_phdr_info info;
-  int ret = 0;
-
-  /* Make sure we are alone.  */
-#ifdef HAVE_DD_LOCK
-    __lock_acquire(_dl_load_lock);
-#endif
-
-
-  for (l = _dl_loaded; l != NULL; l = l->l_next)
-    {
-      /* Skip the dynamic linker.  */
-      if (l->l_phdr == NULL)
-	continue;
-      info.dlpi_addr = l->l_addr;
-      info.dlpi_name = l->l_name;
-      info.dlpi_phdr = l->l_phdr;
-      info.dlpi_phnum = l->l_phnum;
-      ret = callback (&info, sizeof (struct dl_phdr_info), data);
-      if (ret)
-	break;
-    }
-
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-    __lock_release(_dl_load_lock);
-#endif
-
-
-  return ret;
-}
-
-#ifdef SHARED
-weak_alias (__dl_iterate_phdr, dl_iterate_phdr);
-#endif
diff --git a/newlib/libc/sys/linux/dl/dl-libc.c b/newlib/libc/sys/linux/dl/dl-libc.c
deleted file mode 100644
index c83448df7..000000000
--- a/newlib/libc/sys/linux/dl/dl-libc.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* Handle loading and unloading shared objects for internal libc purposes.
-   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Zack Weinberg <zack@rabi.columbia.edu>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <stdlib.h>
-#include <ldsodefs.h>
-
-/* The purpose of this file is to provide wrappers around the dynamic
-   linker error mechanism (similar to dlopen() et al in libdl) which
-   are usable from within libc.  Generally we want to throw away the
-   string that dlerror() would return and just pass back a null pointer
-   for errors.  This also lets the rest of libc not know about the error
-   handling mechanism.
-
-   Much of this code came from gconv_dl.c with slight modifications. */
-
-static int
-internal_function
-dlerror_run (void (*operate) (void *), void *args)
-{
-  const char *objname;
-  const char *last_errstring = NULL;
-  int result;
-
-  (void) _dl_catch_error (&objname, &last_errstring, operate, args);
-
-  result = last_errstring != NULL;
-  if (result && last_errstring != _dl_out_of_memory)
-    free ((char *) last_errstring);
-
-  return result;
-}
-
-/* These functions are called by dlerror_run... */
-
-struct do_dlopen_args
-{
-  /* Argument to do_dlopen.  */
-  const char *name;
-
-  /* Return from do_dlopen.  */
-  struct link_map *map;
-};
-
-struct do_dlsym_args
-{
-  /* Arguments to do_dlsym.  */
-  struct link_map *map;
-  const char *name;
-
-  /* Return values of do_dlsym.  */
-  lookup_t loadbase;
-  const ElfW(Sym) *ref;
-};
-
-static void
-do_dlopen (void *ptr)
-{
-  struct do_dlopen_args *args = (struct do_dlopen_args *) ptr;
-  /* Open and relocate the shared object.  */
-  args->map = _dl_open (args->name, RTLD_LAZY, NULL);
-}
-
-static void
-do_dlsym (void *ptr)
-{
-  struct do_dlsym_args *args = (struct do_dlsym_args *) ptr;
-  args->ref = NULL;
-  args->loadbase = _dl_lookup_symbol (args->name, args->map, &args->ref,
-				      args->map->l_local_scope, 0, 1);
-}
-
-static void
-do_dlclose (void *ptr)
-{
-  _dl_close ((struct link_map *) ptr);
-}
-
-/* ... and these functions call dlerror_run. */
-
-void *
-__libc_dlopen (const char *__name)
-{
-  struct do_dlopen_args args;
-  args.name = __name;
-
-  return (dlerror_run (do_dlopen, &args) ? NULL : (void *) args.map);
-}
-
-void *
-__libc_dlsym (void *__map, const char *__name)
-{
-  struct do_dlsym_args args;
-  args.map = __map;
-  args.name = __name;
-
-  return (dlerror_run (do_dlsym, &args) ? NULL
-	  : (void *) (DL_SYMBOL_ADDRESS (args.loadbase, args.ref)));
-}
-
-int
-__libc_dlclose (void *__map)
-{
-  return dlerror_run (do_dlclose, __map);
-}
-
-
-static void
-free_mem (void)
-{
-  struct link_map *l;
-  struct r_search_path_elem *d;
-
-  /* Remove all search directories.  */
-  d = _dl_all_dirs;
-  while (d != _dl_init_all_dirs)
-    {
-      struct r_search_path_elem *old = d;
-      d = d->next;
-      free (old);
-    }
-
-  /* Remove all additional names added to the objects.  */
-  for (l = _dl_loaded; l != NULL; l = l->l_next)
-    {
-      struct libname_list *lnp = l->l_libname->next;
-
-      l->l_libname->next = NULL;
-
-      while (lnp != NULL)
-	{
-	  struct libname_list *old = lnp;
-	  lnp = lnp->next;
-	  if (! old->dont_free)
-	    free (old);
-	}
-    }
-}
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/dl/dl-librecon.h b/newlib/libc/sys/linux/dl/dl-librecon.h
deleted file mode 100644
index 3e39a32e6..000000000
--- a/newlib/libc/sys/linux/dl/dl-librecon.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* Optional code to distinguish library flavours.
-   Copyright (C) 1998, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _DL_LIBRECON_H
-#define _DL_LIBRECON_H	1
-
-#define DISTINGUISH_LIB_VERSIONS \
-  do									      \
-    {									      \
-      /* We have to find out whether the binary is linked against	      \
-	 libc 5 or glibc.  We do this by looking at all the DT_NEEDED	      \
-	 entries.  If one is libc.so.5 this is a libc 5 linked binary.  */    \
-      if (_dl_loaded->l_info[DT_NEEDED])				      \
-	{								      \
-	  /* We have dependencies.  */					      \
-	  const ElfW(Dyn) *d;						      \
-	  const char *strtab;						      \
-									      \
-	  strtab = (const char *) D_PTR (_dl_loaded, l_info[DT_STRTAB]);      \
-									      \
-	  for (d = _dl_loaded->l_ld; d->d_tag != DT_NULL; ++d)		      \
-	    if (d->d_tag == DT_NEEDED					      \
-		&& strcmp (strtab + d->d_un.d_val, "libc.so.5") == 0)	      \
-	      break;							      \
-									      \
-	  /* We print a `5' or `6' depending on the outcome.  */	      \
-	  _dl_printf (d->d_tag != DT_NULL ? "5\n" : "6\n");		      \
-	}								      \
-    }									      \
-  while (0)
-
-/* Recognizing extra environment variables.  */
-#define EXTRA_LD_ENVVARS \
-  case 13:								      \
-    if (memcmp (envline, "ASSUME_KERNEL", 13) == 0)			      \
-      {									      \
-	unsigned long int i, j, osversion = 0;				      \
-	char *p = &envline[14], *q;					      \
-									      \
-	for (i = 0; i < 3; i++, p = q + 1)				      \
-	  {								      \
-	    j = __strtoul_internal (p, &q, 0, 0);			      \
-	    if (j >= 255 || p == q || (i < 2 && *q && *q != '.'))	      \
-	      {								      \
-		osversion = 0;						      \
-		break;							      \
-	      }								      \
-	    osversion |= j << (16 - 8 * i);				      \
-	    if (!*q)							      \
-	      break;							      \
-	  }								      \
-	if (osversion)							      \
-	  _dl_osversion = osversion;					      \
-	break;								      \
-      }									      \
-									      \
-  case 15:								      \
-    if (memcmp (envline, "LIBRARY_VERSION", 15) == 0)			      \
-      {									      \
-	_dl_correct_cache_id = envline[16] == '5' ? 2 : 3;		      \
-	break;								      \
-      }
-
-/* Extra unsecure variables.  The names are all stuffed in a single
-   string which means they have to be terminated with a '\0' explicitly.  */
-#define EXTRA_UNSECURE_ENVVARS \
-  "LD_AOUT_LIBRARY_PATH\0"						      \
-  "LD_AOUT_PRELOAD\0"
-
-#endif /* dl-librecon.h */
diff --git a/newlib/libc/sys/linux/dl/dl-load.c b/newlib/libc/sys/linux/dl/dl-load.c
deleted file mode 100644
index 65b72c729..000000000
--- a/newlib/libc/sys/linux/dl/dl-load.c
+++ /dev/null
@@ -1,1830 +0,0 @@
-/* Map in a shared object's segments from the file.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <elf.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include "dynamic-link.h"
-#include <abi-tag.h>
-#include <dl-osinfo.h>
-
-#include <dl-dst.h>
-
-/* On some systems, no flag bits are given to specify file mapping.  */
-#ifndef MAP_FILE
-# define MAP_FILE	0
-#endif
-
-/* The right way to map in the shared library files is MAP_COPY, which
-   makes a virtual copy of the data at the time of the mmap call; this
-   guarantees the mapped pages will be consistent even if the file is
-   overwritten.  Some losing VM systems like Linux's lack MAP_COPY.  All we
-   get is MAP_PRIVATE, which copies each page when it is modified; this
-   means if the file is overwritten, we may at some point get some pages
-   from the new version after starting with pages from the old version.  */
-#ifndef MAP_COPY
-# define MAP_COPY	MAP_PRIVATE
-#endif
-
-/* Some systems link their relocatable objects for another base address
-   than 0.  We want to know the base address for these such that we can
-   subtract this address from the segment addresses during mapping.
-   This results in a more efficient address space usage.  Defaults to
-   zero for almost all systems.  */
-#ifndef MAP_BASE_ADDR
-# define MAP_BASE_ADDR(l)	0
-#endif
-
-
-#include <endian.h>
-#if BYTE_ORDER == BIG_ENDIAN
-# define byteorder ELFDATA2MSB
-#elif BYTE_ORDER == LITTLE_ENDIAN
-# define byteorder ELFDATA2LSB
-#else
-# error "Unknown BYTE_ORDER " BYTE_ORDER
-# define byteorder ELFDATANONE
-#endif
-
-#define STRING(x) __STRING (x)
-
-#ifdef MAP_ANON
-/* The fd is not examined when using MAP_ANON.  */
-# define ANONFD -1
-#else
-int _dl_zerofd = -1;
-# define ANONFD _dl_zerofd
-#endif
-
-/* Handle situations where we have a preferred location in memory for
-   the shared objects.  */
-#ifdef ELF_PREFERRED_ADDRESS_DATA
-ELF_PREFERRED_ADDRESS_DATA;
-#endif
-#ifndef ELF_PREFERRED_ADDRESS
-# define ELF_PREFERRED_ADDRESS(loader, maplength, mapstartpref) (mapstartpref)
-#endif
-#ifndef ELF_FIXED_ADDRESS
-# define ELF_FIXED_ADDRESS(loader, mapstart) ((void) 0)
-#endif
-
-/* Type for the buffer we put the ELF header and hopefully the program
-   header.  This buffer does not really have to be too large.  In most
-   cases the program header follows the ELF header directly.  If this
-   is not the case all bets are off and we can make the header arbitrarily
-   large and still won't get it read.  This means the only question is
-   how large are the ELF and program header combined.  The ELF header
-   in 64-bit files is 56 bytes long.  Each program header entry is again
-   56 bytes long.  I.e., even with a file which has 17 program header
-   entries we only have to read 1kB.  And 17 program header entries is
-   plenty, normal files have < 10.  If this heuristic should really fail
-   for some file the code in `_dl_map_object_from_fd' knows how to
-   recover.  */
-struct filebuf
-{
-  ssize_t len;
-  char buf[1024];
-};
-
-size_t _dl_pagesize;
-
-unsigned int _dl_osversion;
-
-int _dl_clktck;
-
-extern const char *_dl_platform;
-extern size_t _dl_platformlen;
-
-/* The object to be initialized first.  */
-struct link_map *_dl_initfirst;
-
-/* This is the decomposed LD_LIBRARY_PATH search path.  */
-static struct r_search_path_struct env_path_list;
-
-/* List of the hardware capabilities we might end up using.  */
-static const struct r_strlenpair *capstr;
-static size_t ncapstr;
-static size_t max_capstrlen;
-
-
-/* Get the generated information about the trusted directories.  */
-#include "trusted-dirs.h"
-
-static const char system_dirs[] = SYSTEM_DIRS;
-static const size_t system_dirs_len[] =
-{
-  SYSTEM_DIRS_LEN
-};
-#define nsystem_dirs_len \
-  (sizeof (system_dirs_len) / sizeof (system_dirs_len[0]))
-
-
-/* Local version of `strdup' function.  */
-static inline char *
-local_strdup (const char *s)
-{
-  size_t len = strlen (s) + 1;
-  void *new = malloc (len);
-
-  if (new == NULL)
-    return NULL;
-
-  return (char *) memcpy (new, s, len);
-}
-
-
-static size_t
-is_dst (const char *start, const char *name, const char *str, size_t cmplen,
-	int is_path, int secure)
-{
-  size_t len;
-
-  if (strncmp (name, str, cmplen) == 0)
-    len = cmplen + 1;
-  else if (strncmp (name, str + 1, cmplen - 2) == 0
-	   && (name[cmplen - 2] == '\0' || name[cmplen - 2] == '/'
-	       || (is_path && name[cmplen - 2] == ':')))
-    len = cmplen - 1;
-  else
-    return 0;
-
-  if (__builtin_expect (secure, 0)
-      && ((name[len - 1] != '\0' && (!is_path || name[len - 1] != ':'))
-	  || (name != start + 1 && (!is_path || name[-2] != ':'))))
-    return 0;
-
-  return len;
-}
-
-
-size_t
-_dl_dst_count (const char *name, int is_path)
-{
-  const char *const start = name;
-  size_t cnt = 0;
-
-  do
-    {
-      size_t len = 1;
-
-      /* $ORIGIN is not expanded for SUID/GUID programs (except if it
-	 is $ORIGIN alone) and it must always appear first in path.
-
-	 Note that it is no bug that the string in the second and
-	 fourth `strncmp' call is longer than the sequence which is
-	 actually tested.  */
-      if ((len = is_dst (start, name + 1, "{ORIGIN}", 8, is_path,
-			 0)) != 0
-	  || ((len = is_dst (start, name + 1, "{PLATFORM}", 10, is_path, 0))
-	      != 0))
-	++cnt;
-
-      name = strchr (name + len, '$');
-    }
-  while (name != NULL);
-
-  return cnt;
-}
-
-
-char *
-_dl_dst_substitute (struct link_map *l, const char *name, char *result,
-		    int is_path)
-{
-  const char *const start = name;
-  char *last_elem, *wp;
-
-  /* Now fill the result path.  While copying over the string we keep
-     track of the start of the last path element.  When we come accross
-     a DST we copy over the value or (if the value is not available)
-     leave the entire path element out.  */
-  last_elem = wp = result;
-
-  do
-    {
-      if (__builtin_expect (*name == '$', 0))
-	{
-	  const char *repl = NULL;
-	  size_t len = 1;
-
-	  /* Note that it is no bug that the string in the second and
-	     fourth `strncmp' call is longer than the sequence which
-	     is actually tested.  */
-	  if ((len = is_dst (start, name + 1, "{ORIGIN}", 8, is_path,
-			     0)) != 0)
-	    repl = l->l_origin;
-	  else if ((len = is_dst (start, name + 1, "{PLATFORM}", 10, is_path,
-				  0)) != 0)
-	    repl = _dl_platform;
-
-	  if (repl != NULL && repl != (const char *) -1)
-	    {
-	      wp = strcpy (wp, repl);
-              wp += strlen (repl);
-	      name += len;
-	    }
-	  else if (len > 1)
-	    {
-	      /* We cannot use this path element, the value of the
-		 replacement is unknown.  */
-	      wp = last_elem;
-	      name += len;
-	      while (*name != '\0' && (!is_path || *name != ':'))
-		++name;
-	    }
-	  else
-	    /* No DST we recognize.  */
-	    *wp++ = *name++;
-	}
-      else
-	{
-	  *wp++ = *name++;
-	  if (is_path && *name == ':')
-	    last_elem = wp;
-	}
-    }
-  while (*name != '\0');
-
-  *wp = '\0';
-
-  return result;
-}
-
-
-/* Return copy of argument with all recognized dynamic string tokens
-   ($ORIGIN and $PLATFORM for now) replaced.  On some platforms it
-   might not be possible to determine the path from which the object
-   belonging to the map is loaded.  In this case the path element
-   containing $ORIGIN is left out.  */
-static char *
-expand_dynamic_string_token (struct link_map *l, const char *s)
-{
-  /* We make two runs over the string.  First we determine how large the
-     resulting string is and then we copy it over.  Since this is now
-     frequently executed operation we are looking here not for performance
-     but rather for code size.  */
-  size_t cnt;
-  size_t total;
-  char *result;
-
-  /* Determine the number of DST elements.  */
-  cnt = DL_DST_COUNT (s, 1);
-
-  /* If we do not have to replace anything simply copy the string.  */
-  if (__builtin_expect (cnt, 0) == 0)
-    return local_strdup (s);
-
-  /* Determine the length of the substituted string.  */
-  total = DL_DST_REQUIRED (l, s, strlen (s), cnt);
-
-  /* Allocate the necessary memory.  */
-  result = (char *) malloc (total + 1);
-  if (result == NULL)
-    return NULL;
-
-  return DL_DST_SUBSTITUTE (l, s, result, 1);
-}
-
-
-/* Add `name' to the list of names for a particular shared object.
-   `name' is expected to have been allocated with malloc and will
-   be freed if the shared object already has this name.
-   Returns false if the object already had this name.  */
-static void
-internal_function
-add_name_to_object (struct link_map *l, const char *name)
-{
-  struct libname_list *lnp, *lastp;
-  struct libname_list *newname;
-  size_t name_len;
-
-  lastp = NULL;
-  for (lnp = l->l_libname; lnp != NULL; lastp = lnp, lnp = lnp->next)
-    if (strcmp (name, lnp->name) == 0)
-      return;
-
-  name_len = strlen (name) + 1;
-  newname = (struct libname_list *) malloc (sizeof *newname + name_len);
-  if (newname == NULL)
-    {
-      /* No more memory.  */
-      _dl_signal_error (ENOMEM, name, NULL, N_("cannot allocate name record"));
-      return;
-    }
-  /* The object should have a libname set from _dl_new_object.  */
-  assert (lastp != NULL);
-
-  newname->name = memcpy (newname + 1, name, name_len);
-  newname->next = NULL;
-  newname->dont_free = 0;
-  lastp->next = newname;
-}
-
-/* All known directories in sorted order.  */
-struct r_search_path_elem *_dl_all_dirs;
-
-/* All directories after startup.  */
-struct r_search_path_elem *_dl_init_all_dirs;
-
-/* Standard search directories.  */
-static struct r_search_path_struct rtld_search_dirs;
-
-static size_t max_dirnamelen;
-
-static inline struct r_search_path_elem **
-fillin_rpath (char *rpath, struct r_search_path_elem **result, const char *sep,
-	      int check_trusted, const char *what, const char *where)
-{
-  char *cp;
-  size_t nelems = 0;
-
-  printf("In fillin_rpath\n");
-  while ((cp = strsep (&rpath, sep)) != NULL)
-    {
-      struct r_search_path_elem *dirp;
-      size_t len = strlen (cp);
-
-      /* `strsep' can pass an empty string.  This has to be
-         interpreted as `use the current directory'. */
-      if (len == 0)
-	{
-	  static const char curwd[] = "./";
-	  cp = (char *) curwd;
-	}
-
-      /* Remove trailing slashes (except for "/").  */
-      while (len > 1 && cp[len - 1] == '/')
-	--len;
-
-      /* Now add one if there is none so far.  */
-      if (len > 0 && cp[len - 1] != '/')
-	cp[len++] = '/';
-
-      /* Make sure we don't use untrusted directories if we run SUID.  */
-      if (__builtin_expect (check_trusted, 0))
-	{
-	  const char *trun = system_dirs;
-	  size_t idx;
-	  int unsecure = 1;
-
-	  /* All trusted directories must be complete names.  */
-	  if (cp[0] == '/')
-	    {
-	      for (idx = 0; idx < nsystem_dirs_len; ++idx)
-		{
-		  if (len == system_dirs_len[idx]
-		      && memcmp (trun, cp, len) == 0)
-		    {
-		      /* Found it.  */
-		      unsecure = 0;
-		      break;
-		    }
-
-		  trun += system_dirs_len[idx] + 1;
-		}
-	    }
-
-	  if (unsecure)
-	    /* Simply drop this directory.  */
-	    continue;
-	}
-
-      /* See if this directory is already known.  */
-      for (dirp = _dl_all_dirs; dirp != NULL; dirp = dirp->next)
-	if (dirp->dirnamelen == len && memcmp (cp, dirp->dirname, len) == 0)
-	  break;
-
-      if (dirp != NULL)
-	{
-	  /* It is available, see whether it's on our own list.  */
-	  size_t cnt;
-	  for (cnt = 0; cnt < nelems; ++cnt)
-	    if (result[cnt] == dirp)
-	      break;
-
-	  if (cnt == nelems)
-	    result[nelems++] = dirp;
-	}
-      else
-	{
-	  size_t cnt;
-	  enum r_dir_status init_val;
-	  size_t where_len = where ? strlen (where) + 1 : 0;
-
-	  /* It's a new directory.  Create an entry and add it.  */
-	  dirp = (struct r_search_path_elem *)
-	    malloc (sizeof (*dirp) + ncapstr * sizeof (enum r_dir_status)
-		    + where_len + len + 1);
-	  if (dirp == NULL)
-	    _dl_signal_error (ENOMEM, NULL, NULL,
-			      N_("cannot create cache for search path"));
-
-	  dirp->dirname = ((char *) dirp + sizeof (*dirp)
-			   + ncapstr * sizeof (enum r_dir_status));
-	  *((char *) (memcpy ((char *) dirp->dirname, cp, len) + len)) = '\0';
-	  dirp->dirnamelen = len;
-
-	  if (len > max_dirnamelen)
-	    max_dirnamelen = len;
-
-	  /* We have to make sure all the relative directories are
-	     never ignored.  The current directory might change and
-	     all our saved information would be void.  */
-	  init_val = cp[0] != '/' ? existing : unknown;
-	  for (cnt = 0; cnt < ncapstr; ++cnt)
-	    dirp->status[cnt] = init_val;
-
-	  dirp->what = what;
-	  if (__builtin_expect (where != NULL, 1))
-	    dirp->where = memcpy ((char *) dirp + sizeof (*dirp) + len + 1
-				  + ncapstr * sizeof (enum r_dir_status),
-				  where, where_len);
-	  else
-	    dirp->where = NULL;
-
-	  dirp->next = _dl_all_dirs;
-	  _dl_all_dirs = dirp;
-
-	  /* Put it in the result array.  */
-	  result[nelems++] = dirp;
-	}
-    }
-
-  /* Terminate the array.  */
-  result[nelems] = NULL;
-
-  return result;
-}
-
-
-static void
-internal_function
-decompose_rpath (struct r_search_path_struct *sps,
-		 const char *rpath, struct link_map *l, const char *what)
-{
-  /* Make a copy we can work with.  */
-  const char *where = l->l_name;
-  char *copy;
-  char *cp;
-  struct r_search_path_elem **result;
-  size_t nelems;
-  /* Initialize to please the compiler.  */
-  const char *errstring = NULL;
-
-  /* First see whether we must forget the RUNPATH and RPATH from this
-     object.  */
-  if (__builtin_expect (_dl_inhibit_rpath != NULL, 0)) 
-    {
-      const char *found = strstr (_dl_inhibit_rpath, where);
-      if (found != NULL)
-	{
-	  size_t len = strlen (where);
-	  if ((found == _dl_inhibit_rpath || found[-1] == ':')
-	      && (found[len] == '\0' || found[len] == ':'))
-	    {
-	      /* This object is on the list of objects for which the
-		 RUNPATH and RPATH must not be used.  */
-	      result = (struct r_search_path_elem **)
-		malloc (sizeof (*result));
-	      if (result == NULL)
-		{
-		signal_error_cache:
-		  errstring = N_("cannot create cache for search path");
-		signal_error:
-		  _dl_signal_error (ENOMEM, NULL, NULL, errstring);
-		}
-
-	      result[0] = NULL;
-
-	      sps->dirs = result;
-	      sps->malloced = 1;
-
-	      return;
-	    }
-	}
-    }
-
-  /* Make a writable copy.  At the same time expand possible dynamic
-     string tokens.  */
-  copy = expand_dynamic_string_token (l, rpath);
-  if (copy == NULL)
-    {
-      errstring = N_("cannot create RUNPATH/RPATH copy");
-      goto signal_error;
-    }
-
-  /* Count the number of necessary elements in the result array.  */
-  nelems = 0;
-  for (cp = copy; *cp != '\0'; ++cp)
-    if (*cp == ':')
-      ++nelems;
-
-  /* Allocate room for the result.  NELEMS + 1 is an upper limit for the
-     number of necessary entries.  */
-  result = (struct r_search_path_elem **) malloc ((nelems + 1 + 1)
-						  * sizeof (*result));
-  if (result == NULL)
-    goto signal_error_cache;
-
-  fillin_rpath (copy, result, ":", 0, what, where);
-
-  /* Free the copied RPATH string.  `fillin_rpath' make own copies if
-     necessary.  */
-  free (copy);
-
-  sps->dirs = result;
-  /* The caller will change this value if we haven't used a real malloc.  */
-  sps->malloced = 1;
-}
-
-
-void
-internal_function
-_dl_init_paths (const char *llp)
-{
-  size_t idx;
-  const char *strp;
-  struct r_search_path_elem *pelem, **aelem;
-  size_t round_size;
-#ifdef SHARED
-  struct link_map *l;
-#endif
-  /* Initialize to please the compiler.  */
-  const char *errstring = NULL;
-
-  /* Fill in the information about the application's RPATH and the
-     directories addressed by the LD_LIBRARY_PATH environment variable.  */
-
-  /* Get the capabilities.  */
-  capstr = _dl_important_hwcaps (_dl_platform, _dl_platformlen,
-				 &ncapstr, &max_capstrlen);
-
-  /* First set up the rest of the default search directory entries.  */
-  aelem = rtld_search_dirs.dirs = (struct r_search_path_elem **)
-    malloc ((nsystem_dirs_len + 1) * sizeof (struct r_search_path_elem *));
-  if (rtld_search_dirs.dirs == NULL)
-    {
-      errstring = N_("cannot create search path array");
-    signal_error:
-      _dl_signal_error (ENOMEM, NULL, NULL, errstring);
-    }
-
-  round_size = ((2 * sizeof (struct r_search_path_elem) - 1
-		 + ncapstr * sizeof (enum r_dir_status))
-		/ sizeof (struct r_search_path_elem));
-
-  rtld_search_dirs.dirs[0] = (struct r_search_path_elem *)
-    malloc ((sizeof (system_dirs) / sizeof (system_dirs[0]))
-	    * round_size * sizeof (struct r_search_path_elem));
-  if (rtld_search_dirs.dirs[0] == NULL)
-    {
-      errstring = N_("cannot create cache for search path");
-      goto signal_error;
-    }
-
-  rtld_search_dirs.malloced = 0;
-  pelem = _dl_all_dirs = rtld_search_dirs.dirs[0];
-  strp = system_dirs;
-  idx = 0;
-
-  do
-    {
-      size_t cnt;
-
-      *aelem++ = pelem;
-
-      pelem->what = "system search path";
-      pelem->where = NULL;
-
-      pelem->dirname = strp;
-      pelem->dirnamelen = system_dirs_len[idx];
-      strp += system_dirs_len[idx] + 1;
-
-      /* System paths must be absolute.  */
-      assert (pelem->dirname[0] == '/');
-      for (cnt = 0; cnt < ncapstr; ++cnt)
-	pelem->status[cnt] = unknown;
-
-      pelem->next = (++idx == nsystem_dirs_len ? NULL : (pelem + round_size));
-
-      pelem += round_size;
-    }
-  while (idx < nsystem_dirs_len);
-
-  max_dirnamelen = SYSTEM_DIRS_MAX_LEN;
-  *aelem = NULL;
-
-#ifdef SHARED
-  /* This points to the map of the main object.  */
-  l = _dl_loaded;
-  if (l != NULL)
-    {
-      assert (l->l_type != lt_loaded);
-
-      if (l->l_info[DT_RUNPATH])
-	{
-	  /* Allocate room for the search path and fill in information
-	     from RUNPATH.  */
-	  decompose_rpath (&l->l_runpath_dirs,
-			   (const void *) (D_PTR (l, l_info[DT_STRTAB])
-					   + l->l_info[DT_RUNPATH]->d_un.d_val),
-			   l, "RUNPATH");
-
-	  /* The RPATH is ignored.  */
-	  l->l_rpath_dirs.dirs = (void *) -1;
-	}
-      else
-	{
-	  l->l_runpath_dirs.dirs = (void *) -1;
-
-	  if (l->l_info[DT_RPATH])
-	    {
-	      /* Allocate room for the search path and fill in information
-		 from RPATH.  */
-	      decompose_rpath (&l->l_rpath_dirs,
-			       (const void *) (D_PTR (l, l_info[DT_STRTAB])
-					       + l->l_info[DT_RPATH]->d_un.d_val),
-			       l, "RPATH");
-	      l->l_rpath_dirs.malloced = 0;
-	    }
-	  else
-	    l->l_rpath_dirs.dirs = (void *) -1;
-	}
-    }
-#endif	/* SHARED */
-
-  if (llp != NULL && *llp != '\0')
-    {
-      size_t nllp;
-      const char *cp = llp;
-      const char *old = llp;
-      size_t len = strlen (old) + 1;
-      char *new = alloca(len);
-      char *llp_tmp;
-
-      llp_tmp = memcpy (new, old, len);
-
-      /* Decompose the LD_LIBRARY_PATH contents.  First determine how many
-	 elements it has.  */
-      nllp = 1;
-      while (*cp)
-	{
-	  if (*cp == ':' || *cp == ';')
-	    ++nllp;
-	  ++cp;
-	}
-
-      env_path_list.dirs = (struct r_search_path_elem **)
-	malloc ((nllp + 1) * sizeof (struct r_search_path_elem *));
-      if (env_path_list.dirs == NULL)
-	{
-	  errstring = N_("cannot create cache for search path");
-	  goto signal_error;
-	}
-
-      (void) fillin_rpath (llp_tmp, env_path_list.dirs, ":;",
-			   0, "LD_LIBRARY_PATH", NULL);
-
-      if (env_path_list.dirs[0] == NULL)
-	{
-	  free (env_path_list.dirs);
-	  env_path_list.dirs = (void *) -1;
-	}
-
-      env_path_list.malloced = 0;
-    }
-  else
-    env_path_list.dirs = (void *) -1;
-
-  /* Remember the last search directory added at startup.  */
-  _dl_init_all_dirs = _dl_all_dirs;
-}
-
-
-/* Think twice before changing anything in this function.  It is placed
-   here and prepared using the `alloca' magic to prevent it from being
-   inlined.  The function is only called in case of an error.  But then
-   performance does not count.  The function used to be "inlinable" and
-   the compiled did so all the time.  This increased the code size for
-   absolutely no good reason.  */
-static void
-__attribute__ ((noreturn))
-lose (int code, int fd, const char *name, char *realname, struct link_map *l,
-      const char *msg)
-{
-  /* The use of `alloca' here looks ridiculous but it helps.  The goal
-     is to avoid the function from being inlined.  There is no official
-     way to do this so we use this trick.  gcc never inlines functions
-     which use `alloca'.  */
-  int *a = (int *) alloca (sizeof (int));
-  a[0] = fd;
-  /* The file might already be closed.  */
-  if (a[0] != -1)
-    (void) close (a[0]);
-  if (l != NULL)
-    {
-      /* Remove the stillborn object from the list and free it.  */
-      assert (l->l_next == NULL);
-#ifndef SHARED
-      if (l->l_prev == NULL)
-	/* No other module loaded.  */
-	_dl_loaded = NULL;
-      else
-#endif
-	l->l_prev->l_next = NULL;
-      --_dl_nloaded;
-      free (l);
-    }
-  free (realname);
-  _dl_signal_error (code, name, NULL, msg);
-}
-
-
-/* Map in the shared object NAME, actually located in REALNAME, and already
-   opened on FD.  */
-
-#ifndef EXTERNAL_MAP_FROM_FD
-static
-#endif
-struct link_map *
-_dl_map_object_from_fd (const char *name, int fd, struct filebuf *fbp,
-			char *realname, struct link_map *loader, int l_type,
-			int mode)
-{
-  struct link_map *l = NULL;
-  const ElfW(Ehdr) *header;
-  const ElfW(Phdr) *phdr;
-  const ElfW(Phdr) *ph;
-  size_t maplength;
-  int type;
-  struct stat64 st;
-  /* Initialize to keep the compiler happy.  */
-  const char *errstring = NULL;
-  int errval = 0;
-
-  /* Get file information.  */
-  if (__builtin_expect (fstat64 (fd, &st) < 0, 0))
-    {
-      errstring = N_("cannot stat shared object");
-    call_lose_errno:
-      errval = errno;
-    call_lose:
-      fprintf (stderr, "%s\n", errstring);
-      lose (errval, fd, name, realname, l, errstring);
-    }
-
-  /* Look again to see if the real name matched another already loaded.  */
-  for (l = _dl_loaded; l; l = l->l_next)
-    if (l->l_ino == st.st_ino && l->l_dev == st.st_dev)
-      {
-	/* The object is already loaded.
-	   Just bump its reference count and return it.  */
-	close (fd);
-
-	/* If the name is not in the list of names for this object add
-	   it.  */
-	free (realname);
-	add_name_to_object (l, name);
-
-	return l;
-      }
-
-  if (mode & RTLD_NOLOAD)
-    /* We are not supposed to load the object unless it is already
-       loaded.  So return now.  */
-    return NULL;
-
-  /* Print debugging message.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-    _dl_debug_printf ("file=%s;  generating link map\n", name);
-
-  /* This is the ELF header.  We read it in `open_verify'.  */
-  header = (void *) fbp->buf;
-
-#ifndef MAP_ANON
-# define MAP_ANON 0
-  if (_dl_zerofd == -1)
-    {
-      _dl_zerofd = _dl_sysdep_open_zero_fill ();
-      if (_dl_zerofd == -1)
-	{
-	  close (fd);
-	  _dl_signal_error (errno, NULL, NULL,
-			    N_("cannot open zero fill device"));
-	}
-    }
-#endif
-
-  /* Enter the new object in the list of loaded objects.  */
-  l = _dl_new_object (realname, name, l_type, loader);
-  if (__builtin_expect (! l, 0))
-    {
-      errstring = N_("cannot create shared object descriptor");
-      goto call_lose_errno;
-    }
-
-  /* Extract the remaining details we need from the ELF header
-     and then read in the program header table.  */
-  l->l_entry = header->e_entry;
-  type = header->e_type;
-  l->l_phnum = header->e_phnum;
-
-  maplength = header->e_phnum * sizeof (ElfW(Phdr));
-  if (header->e_phoff + maplength <= fbp->len)
-    phdr = (void *) (fbp->buf + header->e_phoff);
-  else
-    {
-      phdr = alloca (maplength);
-      lseek (fd, SEEK_SET, header->e_phoff);
-      if (__libc_read (fd, (void *) phdr, maplength) != maplength)
-	{
-	  errstring = N_("cannot read file data");
-	  goto call_lose_errno;
-	}
-    }
-
-  {
-    /* Scan the program header table, collecting its load commands.  */
-    struct loadcmd
-      {
-	ElfW(Addr) mapstart, mapend, dataend, allocend;
-	off_t mapoff;
-	int prot;
-      } loadcmds[l->l_phnum], *c;
-    size_t nloadcmds = 0;
-
-    /* The struct is initialized to zero so this is not necessary:
-    l->l_ld = 0;
-    l->l_phdr = 0;
-    l->l_addr = 0; */
-    for (ph = phdr; ph < &phdr[l->l_phnum]; ++ph)
-      switch (ph->p_type)
-	{
-	  /* These entries tell us where to find things once the file's
-	     segments are mapped in.  We record the addresses it says
-	     verbatim, and later correct for the run-time load address.  */
-	case PT_DYNAMIC:
-	  l->l_ld = (void *) ph->p_vaddr;
-	  l->l_ldnum = ph->p_memsz / sizeof (ElfW(Dyn));
-	  break;
-
-	case PT_PHDR:
-	  l->l_phdr = (void *) ph->p_vaddr;
-	  break;
-
-	case PT_LOAD:
-	  /* A load command tells us to map in part of the file.
-	     We record the load commands and process them all later.  */
-	  if ((ph->p_align & (_dl_pagesize - 1)) != 0)
-	    {
-	      errstring = N_("ELF load command alignment not page-aligned");
-	      goto call_lose;
-	    }
-	  if (((ph->p_vaddr - ph->p_offset) & (ph->p_align - 1)) != 0)
-	    {
-	      errstring
-		= N_("ELF load command address/offset not properly aligned");
-	      goto call_lose;
-	    }
-
-	  {
-	    struct loadcmd *c = &loadcmds[nloadcmds++];
-	    c->mapstart = ph->p_vaddr & ~(ph->p_align - 1);
-	    c->mapend = ((ph->p_vaddr + ph->p_filesz + _dl_pagesize - 1)
-			 & ~(_dl_pagesize - 1));
-	    c->dataend = ph->p_vaddr + ph->p_filesz;
-	    c->allocend = ph->p_vaddr + ph->p_memsz;
-	    c->mapoff = ph->p_offset & ~(ph->p_align - 1);
-
-	    /* Optimize a common case.  */
-#if (PF_R | PF_W | PF_X) == 7 && (PROT_READ | PROT_WRITE | PROT_EXEC) == 7
-	    c->prot = (PF_TO_PROT
-		       >> ((ph->p_flags & (PF_R | PF_W | PF_X)) * 4)) & 0xf;
-#else
-	    c->prot = 0;
-	    if (ph->p_flags & PF_R)
-	      c->prot |= PROT_READ;
-	    if (ph->p_flags & PF_W)
-	      c->prot |= PROT_WRITE;
-	    if (ph->p_flags & PF_X)
-	      c->prot |= PROT_EXEC;
-#endif
-	  }
-	  break;
-	}
-
-    /* Now process the load commands and map segments into memory.  */
-    c = loadcmds;
-
-    /* Length of the sections to be loaded.  */
-    maplength = loadcmds[nloadcmds - 1].allocend - c->mapstart;
-
-    if (__builtin_expect (type, ET_DYN) == ET_DYN)
-      {
-	/* This is a position-independent shared object.  We can let the
-	   kernel map it anywhere it likes, but we must have space for all
-	   the segments in their specified positions relative to the first.
-	   So we map the first segment without MAP_FIXED, but with its
-	   extent increased to cover all the segments.  Then we remove
-	   access from excess portion, and there is known sufficient space
-	   there to remap from the later segments.
-
-	   As a refinement, sometimes we have an address that we would
-	   prefer to map such objects at; but this is only a preference,
-	   the OS can do whatever it likes. */
-	ElfW(Addr) mappref;
-	mappref = (ELF_PREFERRED_ADDRESS (loader, maplength, c->mapstart)
-		   - MAP_BASE_ADDR (l));
-
-	/* Remember which part of the address space this object uses.  */
-	l->l_map_start = (ElfW(Addr)) mmap ((void *) mappref, maplength,
-					      c->prot, MAP_COPY | MAP_FILE,
-					      fd, c->mapoff);
-	if ((void *) l->l_map_start == MAP_FAILED)
-	  {
-	  map_error:
-	    errstring = N_("failed to map segment from shared object");
-	    goto call_lose_errno;
-	  }
-
-	l->l_map_end = l->l_map_start + maplength;
-	l->l_addr = l->l_map_start - c->mapstart;
-
-	/* Change protection on the excess portion to disallow all access;
-	   the portions we do not remap later will be inaccessible as if
-	   unallocated.  Then jump into the normal segment-mapping loop to
-	   handle the portion of the segment past the end of the file
-	   mapping.  */
-	mprotect ((caddr_t) (l->l_addr + c->mapend),
-		    loadcmds[nloadcmds - 1].allocend - c->mapend,
-		    PROT_NONE);
-
-	goto postmap;
-      }
-    else
-      {
-	/* This object is loaded at a fixed address.  This must never
-           happen for objects loaded with dlopen().  */
-	if (__builtin_expect (mode & __RTLD_DLOPEN, 0))
-	  {
-	    errstring = N_("cannot dynamically load executable");
-	    goto call_lose;
-	  }
-
-	/* Notify ELF_PREFERRED_ADDRESS that we have to load this one
-	   fixed.  */
-	ELF_FIXED_ADDRESS (loader, c->mapstart);
-      }
-
-    /* Remember which part of the address space this object uses.  */
-    l->l_map_start = c->mapstart + l->l_addr;
-    l->l_map_end = l->l_map_start + maplength;
-
-    while (c < &loadcmds[nloadcmds])
-      {
-	if (c->mapend > c->mapstart
-	    /* Map the segment contents from the file.  */
-	    && (mmap ((void *) (l->l_addr + c->mapstart),
-			c->mapend - c->mapstart, c->prot,
-			MAP_FIXED | MAP_COPY | MAP_FILE, fd, c->mapoff)
-		== MAP_FAILED))
-	  goto map_error;
-
-      postmap:
-	if (l->l_phdr == 0
-	    && c->mapoff <= header->e_phoff
-	    && (c->mapend - c->mapstart + c->mapoff
-		>= header->e_phoff + header->e_phnum * sizeof (ElfW(Phdr))))
-	  /* Found the program header in this segment.  */
-	  l->l_phdr = (void *) (c->mapstart + header->e_phoff - c->mapoff);
-
-	if (c->allocend > c->dataend)
-	  {
-	    /* Extra zero pages should appear at the end of this segment,
-	       after the data mapped from the file.   */
-	    ElfW(Addr) zero, zeroend, zeropage;
-
-	    zero = l->l_addr + c->dataend;
-	    zeroend = l->l_addr + c->allocend;
-	    zeropage = (zero + _dl_pagesize - 1) & ~(_dl_pagesize - 1);
-
-	    if (zeroend < zeropage)
-	      /* All the extra data is in the last page of the segment.
-		 We can just zero it.  */
-	      zeropage = zeroend;
-
-	    if (zeropage > zero)
-	      {
-		/* Zero the final part of the last page of the segment.  */
-		if ((c->prot & PROT_WRITE) == 0)
-		  {
-		    /* Dag nab it.  */
-		    if (mprotect ((caddr_t) (zero & ~(_dl_pagesize - 1)),
-				    _dl_pagesize, c->prot|PROT_WRITE) < 0)
-		      {
-			errstring = N_("cannot change memory protections");
-			goto call_lose_errno;
-		      }
-		  }
-		memset ((void *) zero, '\0', zeropage - zero);
-		if ((c->prot & PROT_WRITE) == 0)
-		  mprotect ((caddr_t) (zero & ~(_dl_pagesize - 1)),
-			      _dl_pagesize, c->prot);
-	      }
-
-	    if (zeroend > zeropage)
-	      {
-		/* Map the remaining zero pages in from the zero fill FD.  */
-		caddr_t mapat;
-		mapat = mmap ((caddr_t) zeropage, zeroend - zeropage,
-				c->prot, MAP_ANON|MAP_PRIVATE|MAP_FIXED,
-				ANONFD, 0);
-		if (mapat == MAP_FAILED)
-		  {
-		    errstring = N_("cannot map zero-fill pages");
-		    goto call_lose_errno;
-		  }
-	      }
-	  }
-
-	++c;
-      }
-
-    if (l->l_phdr == NULL)
-      {
-	/* The program header is not contained in any of the segments.
-	   We have to allocate memory ourself and copy it over from
-	   out temporary place.  */
-	ElfW(Phdr) *newp = (ElfW(Phdr) *) malloc (header->e_phnum
-						  * sizeof (ElfW(Phdr)));
-	if (newp == NULL)
-	  {
-	    errstring = N_("cannot allocate memory for program header");
-	    goto call_lose_errno;
-	  }
-
-	l->l_phdr = memcpy (newp, phdr,
-			    (header->e_phnum * sizeof (ElfW(Phdr))));
-	l->l_phdr_allocated = 1;
-      }
-    else
-      /* Adjust the PT_PHDR value by the runtime load address.  */
-      (ElfW(Addr)) l->l_phdr += l->l_addr;
-  }
-
-  /* We are done mapping in the file.  We no longer need the descriptor.  */
-  close (fd);
-  /* Signal that we closed the file.  */
-  fd = -1;
-
-  if (l->l_type == lt_library && type == ET_EXEC)
-    l->l_type = lt_executable;
-
-  if (l->l_ld == 0)
-    {
-      if (type == ET_DYN)
-	{
-	  errstring = N_("object file has no dynamic section");
-	  goto call_lose;
-	}
-    }
-  else
-    (ElfW(Addr)) l->l_ld += l->l_addr;
-
-  l->l_entry += l->l_addr;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-    _dl_debug_printf ("  dynamic: 0x%0*lx  base: 0x%0*lx   size: 0x%0*Zx\n"
-		      "    entry: 0x%0*lx  phdr: 0x%0*lx  phnum:   %*u\n\n",
-		      (int) sizeof (void *) * 2, (unsigned long int) l->l_ld,
-		      (int) sizeof (void *) * 2, (unsigned long int) l->l_addr,
-		      (int) sizeof (void *) * 2, maplength,
-		      (int) sizeof (void *) * 2, (unsigned long int) l->l_entry,
-		      (int) sizeof (void *) * 2, (unsigned long int) l->l_phdr,
-		      (int) sizeof (void *) * 2, l->l_phnum);
-
-  elf_get_dynamic_info (l);
-
-  /* Make sure we are dlopen()ing an object which has the DF_1_NOOPEN
-     flag set.  */
-  if (__builtin_expect (l->l_flags_1 & DF_1_NOOPEN, 0)
-      && (mode & __RTLD_DLOPEN))
-    {
-      /* We are not supposed to load this object.  Free all resources.  */
-      munmap ((void *) l->l_map_start, l->l_map_end - l->l_map_start);
-
-      if (!l->l_libname->dont_free)
-	free (l->l_libname);
-
-      if (l->l_phdr_allocated)
-	free ((void *) l->l_phdr);
-
-      errstring = N_("shared object cannot be dlopen()ed");
-      goto call_lose;
-    }
-
-  if (l->l_info[DT_HASH])
-    _dl_setup_hash (l);
-
-  /* If this object has DT_SYMBOLIC set modify now its scope.  We don't
-     have to do this for the main map.  */
-  if (__builtin_expect (l->l_info[DT_SYMBOLIC] != NULL, 0)
-      && &l->l_searchlist != l->l_scope[0])
-    {
-      /* Create an appropriate searchlist.  It contains only this map.
-
-	 XXX This is the definition of DT_SYMBOLIC in SysVr4.  The old
-	 GNU ld.so implementation had a different interpretation which
-	 is more reasonable.  We are prepared to add this possibility
-	 back as part of a GNU extension of the ELF format.  */
-      l->l_symbolic_searchlist.r_list =
-	(struct link_map **) malloc (sizeof (struct link_map *));
-
-      if (l->l_symbolic_searchlist.r_list == NULL)
-	{
-	  errstring = N_("cannot create searchlist");
-	  goto call_lose_errno;
-	}
-
-      l->l_symbolic_searchlist.r_list[0] = l;
-      l->l_symbolic_searchlist.r_nlist = 1;
-
-      /* Now move the existing entries one back.  */
-      memmove (&l->l_scope[1], &l->l_scope[0],
-	       (l->l_scope_max - 1) * sizeof (l->l_scope[0]));
-
-      /* Now add the new entry.  */
-      l->l_scope[0] = &l->l_symbolic_searchlist;
-    }
-
-  /* Remember whether this object must be initialized first.  */
-  if (l->l_flags_1 & DF_1_INITFIRST)
-    _dl_initfirst = l;
-
-  /* Finally the file information.  */
-  l->l_dev = st.st_dev;
-  l->l_ino = st.st_ino;
-
-  return l;
-}
-
-/* Print search path.  */
-static void
-print_search_path (struct r_search_path_elem **list,
-                   const char *what, const char *name)
-{
-  char buf[max_dirnamelen + max_capstrlen];
-  int first = 1;
-
-  _dl_debug_printf (" search path=");
-
-  while (*list != NULL && (*list)->what == what) /* Yes, ==.  */
-    {
-      char *endp = memcpy (buf, (*list)->dirname, (*list)->dirnamelen);
-      size_t cnt;
-      endp += (*list)->dirnamelen;
-
-
-      for (cnt = 0; cnt < ncapstr; ++cnt)
-	if ((*list)->status[cnt] != nonexisting)
-	  {
-	    char *cp = memcpy (endp, capstr[cnt].str, capstr[cnt].len);
-            cp += capstr[cnt].len;
-
-	    if (cp == buf || (cp == buf + 1 && buf[0] == '/'))
-	      cp[0] = '\0';
-	    else
-	      cp[-1] = '\0';
-
-	    _dl_debug_printf_c (first ? "%s" : ":%s", buf);
-	    first = 0;
-	  }
-
-      ++list;
-    }
-
-  if (name != NULL)
-    _dl_debug_printf_c ("\t\t(%s from file %s)\n", what,
-			name[0] ? name : _dl_argv[0]);
-  else
-    _dl_debug_printf_c ("\t\t(%s)\n", what);
-}
-
-/* Open a file and verify it is an ELF file for this architecture.  We
-   ignore only ELF files for other architectures.  Non-ELF files and
-   ELF files with different header information cause fatal errors since
-   this could mean there is something wrong in the installation and the
-   user might want to know about this.  */
-static int
-open_verify (const char *name, struct filebuf *fbp)
-{
-  /* This is the expected ELF header.  */
-#define ELF32_CLASS ELFCLASS32
-#define ELF64_CLASS ELFCLASS64
-#ifndef VALID_ELF_HEADER
-# define VALID_ELF_HEADER(hdr,exp,size)	(memcmp (hdr, exp, size) == 0)
-# define VALID_ELF_OSABI(osabi)		(osabi == ELFOSABI_SYSV)
-# define VALID_ELF_ABIVERSION(ver)	(ver == 0)
-#endif
-  static const unsigned char expected[EI_PAD] =
-  {
-    [EI_MAG0] = ELFMAG0,
-    [EI_MAG1] = ELFMAG1,
-    [EI_MAG2] = ELFMAG2,
-    [EI_MAG3] = ELFMAG3,
-    [EI_CLASS] = ELFW(CLASS),
-    [EI_DATA] = byteorder,
-    [EI_VERSION] = EV_CURRENT,
-    [EI_OSABI] = ELFOSABI_SYSV,
-    [EI_ABIVERSION] = 0
-  };
-  static const struct
-  {
-    ElfW(Word) vendorlen;
-    ElfW(Word) datalen;
-    ElfW(Word) type;
-    char vendor[4];
-  } expected_note = { 4, 16, 1, "GNU" };
-  int fd;
-  /* Initialize it to make the compiler happy.  */
-  const char *errstring = NULL;
-  int errval = 0;
-
-  /* Open the file.  We always open files read-only.  */
-  fd = open (name, O_RDONLY);
-  if (fd != -1)
-    {
-      ElfW(Ehdr) *ehdr;
-      ElfW(Phdr) *phdr, *ph;
-      ElfW(Word) *abi_note, abi_note_buf[8];
-      unsigned int osversion;
-      size_t maplength;
-
-      /* We successfully openened the file.  Now verify it is a file
-	 we can use.  */
-      __set_errno (0);
-      fbp->len = __libc_read (fd, fbp->buf, sizeof (fbp->buf));
-
-      /* This is where the ELF header is loaded.  */
-      assert (sizeof (fbp->buf) > sizeof (ElfW(Ehdr)));
-      ehdr = (ElfW(Ehdr) *) fbp->buf;
-
-      /* Now run the tests.  */
-      if (__builtin_expect (fbp->len < (ssize_t) sizeof (ElfW(Ehdr)), 0))
-	{
-	  errval = errno;
-	  errstring = (errval == 0
-		       ? N_("file too short") : N_("cannot read file data"));
-	call_lose:
-	  lose (errval, fd, name, NULL, NULL, errstring);
-	}
-
-      /* See whether the ELF header is what we expect.  */
-      if (__builtin_expect (! VALID_ELF_HEADER (ehdr->e_ident, expected,
-						EI_PAD), 0))
-	{
-	  /* Something is wrong.  */
-	  if (*(Elf32_Word *) &ehdr->e_ident !=
-#if BYTE_ORDER == LITTLE_ENDIAN
-	      ((ELFMAG0 << (EI_MAG0 * 8)) |
-	       (ELFMAG1 << (EI_MAG1 * 8)) |
-	       (ELFMAG2 << (EI_MAG2 * 8)) |
-	       (ELFMAG3 << (EI_MAG3 * 8)))
-#else
-	      ((ELFMAG0 << (EI_MAG3 * 8)) |
-	       (ELFMAG1 << (EI_MAG2 * 8)) |
-	       (ELFMAG2 << (EI_MAG1 * 8)) |
-	       (ELFMAG3 << (EI_MAG0 * 8)))
-#endif
-	      )
-	    errstring = N_("invalid ELF header");
-	  else if (ehdr->e_ident[EI_CLASS] != ELFW(CLASS))
-	    /* This is not a fatal error.  On architectures where
-	       32-bit and 64-bit binaries can be run this might
-	       happen.  */
-	    goto close_and_out;
-	  else if (ehdr->e_ident[EI_DATA] != byteorder)
-	    {
-	      if (BYTE_ORDER == BIG_ENDIAN)
-		errstring = N_("ELF file data encoding not big-endian");
-	      else
-		errstring = N_("ELF file data encoding not little-endian");
-	    }
-	  else if (ehdr->e_ident[EI_VERSION] != EV_CURRENT)
-	    errstring
-	      = N_("ELF file version ident does not match current one");
-	  /* XXX We should be able so set system specific versions which are
-	     allowed here.  */
-	  else if (!VALID_ELF_OSABI (ehdr->e_ident[EI_OSABI]))
-	    errstring = N_("ELF file OS ABI invalid");
-	  else if (!VALID_ELF_ABIVERSION (ehdr->e_ident[EI_ABIVERSION]))
-	    errstring = N_("ELF file ABI version invalid");
-	  else
-	    /* Otherwise we don't know what went wrong.  */
-	    errstring = N_("internal error");
-
-	  goto call_lose;
-	}
-
-      if (__builtin_expect (ehdr->e_version, EV_CURRENT) != EV_CURRENT)
-	{
-	  errstring = N_("ELF file version does not match current one");
-	  goto call_lose;
-	}
-      if (! __builtin_expect (elf_machine_matches_host (ehdr), 1))
-	goto close_and_out;
-      else if (__builtin_expect (ehdr->e_phentsize, sizeof (ElfW(Phdr)))
-	       != sizeof (ElfW(Phdr)))
-	{
-	  errstring = N_("ELF file's phentsize not the expected size");
-	  goto call_lose;
-	}
-      else if (__builtin_expect (ehdr->e_type, ET_DYN) != ET_DYN
-	       && __builtin_expect (ehdr->e_type, ET_EXEC) != ET_EXEC)
-	{
-	  errstring = N_("only ET_DYN and ET_EXEC can be loaded");
-	  goto call_lose;
-	}
-
-      maplength = ehdr->e_phnum * sizeof (ElfW(Phdr));
-      if (ehdr->e_phoff + maplength <= fbp->len)
-	phdr = (void *) (fbp->buf + ehdr->e_phoff);
-      else
-	{
-	  phdr = alloca (maplength);
-	  lseek (fd, SEEK_SET, ehdr->e_phoff);
-	  if (__libc_read (fd, (void *) phdr, maplength) != maplength)
-	    {
-	    read_error:
-	      errval = errno;
-	      errstring = N_("cannot read file data");
-	      goto call_lose;
-	    }
-	}
-
-      /* Check .note.ABI-tag if present.  */
-      for (ph = phdr; ph < &phdr[ehdr->e_phnum]; ++ph)
-	if (ph->p_type == PT_NOTE && ph->p_filesz == 32 && ph->p_align >= 4)
-	  {
-	    if (ph->p_offset + 32 <= fbp->len)
-	      abi_note = (void *) (fbp->buf + ph->p_offset);
-	    else
-	      {
-		lseek (fd, SEEK_SET, ph->p_offset);
-		if (__libc_read (fd, (void *) abi_note_buf, 32) != 32)
-		  goto read_error;
-
-		abi_note = abi_note_buf;
-	      }
-
-	    if (memcmp (abi_note, &expected_note, sizeof (expected_note)))
-	      continue;
-
-	    osversion = (abi_note[5] & 0xff) * 65536
-			+ (abi_note[6] & 0xff) * 256
-			+ (abi_note[7] & 0xff);
-	    if (abi_note[4] != __ABI_TAG_OS
-		|| (_dl_osversion && _dl_osversion < osversion))
-	      {
-	      close_and_out:
-		close (fd);
-		__set_errno (ENOENT);
-		fd = -1;
-	      }
-
-	    break;
-	  }
-    }
-
-  return fd;
-}
-
-/* Try to open NAME in one of the directories in *DIRSP.
-   Return the fd, or -1.  If successful, fill in *REALNAME
-   with the malloc'd full directory name.  If it turns out
-   that none of the directories in *DIRSP exists, *DIRSP is
-   replaced with (void *) -1, and the old value is free()d
-   if MAY_FREE_DIRS is true.  */
-
-static int
-open_path (const char *name, size_t namelen, int preloaded,
-	   struct r_search_path_struct *sps, char **realname,
-	   struct filebuf *fbp)
-{
-  struct r_search_path_elem **dirs = sps->dirs;
-  char *buf;
-  int fd = -1;
-  const char *current_what = NULL;
-  int any = 0;
-
-  buf = alloca (max_dirnamelen + max_capstrlen + namelen);
-  do
-    {
-      struct r_search_path_elem *this_dir = *dirs;
-      size_t buflen = 0;
-      size_t cnt;
-      char *edp;
-      int here_any = 0;
-      int err;
-
-      /* If we are debugging the search for libraries print the path
-	 now if it hasn't happened now.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0)
-	  && current_what != this_dir->what)
-	{
-	  current_what = this_dir->what;
-	  print_search_path (dirs, current_what, this_dir->where);
-	}
-
-      edp = (char *) (memcpy (buf, this_dir->dirname, this_dir->dirnamelen) + this_dir->dirnamelen);
-      for (cnt = 0; fd == -1 && cnt < ncapstr; ++cnt)
-	{
-          char *tmp;
-	  /* Skip this directory if we know it does not exist.  */
-	  if (this_dir->status[cnt] == nonexisting)
-	    continue;
-
-          tmp = memcpy (edp, capstr[cnt].str, capstr[cnt].len);
-          tmp += capstr[cnt].len;
-
-          tmp = memcpy (tmp, name, namelen);
-          tmp += namelen;
-	  buflen = ((char *) (tmp - buf));
-
-	  /* Print name we try if this is wanted.  */
-	  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))
-	    _dl_debug_printf ("  trying file=%s\n", buf);
-
-	  fd = open_verify (buf, fbp);
-	  if (this_dir->status[cnt] == unknown)
-	    {
-	      if (fd != -1)
-		this_dir->status[cnt] = existing;
-	      else
-		{
-		  /* We failed to open machine dependent library.  Let's
-		     test whether there is any directory at all.  */
-		  struct stat64 st;
-
-		  buf[buflen - namelen - 1] = '\0';
-
-		  if (stat64 (buf, &st) != 0
-		      || ! S_ISDIR (st.st_mode))
-		    /* The directory does not exist or it is no directory.  */
-		    this_dir->status[cnt] = nonexisting;
-		  else
-		    this_dir->status[cnt] = existing;
-		}
-	    }
-
-	  /* Remember whether we found any existing directory.  */
-	  here_any |= this_dir->status[cnt] == existing;
-
-	  if (fd != -1 && __builtin_expect (preloaded, 0)
-	      && 0)
-	    {
-	      /* This is an extra security effort to make sure nobody can
-		 preload broken shared objects which are in the trusted
-		 directories and so exploit the bugs.  */
-	      struct stat64 st;
-
-	      if (fstat64 (fd, &st) != 0
-		  || (st.st_mode & S_ISUID) == 0)
-		{
-		  /* The shared object cannot be tested for being SUID
-		     or this bit is not set.  In this case we must not
-		     use this object.  */
-		  close (fd);
-		  fd = -1;
-		  /* We simply ignore the file, signal this by setting
-		     the error value which would have been set by `open'.  */
-		  errno = ENOENT;
-		}
-	    }
-	}
-
-      if (fd != -1)
-	{
-	  *realname = (char *) malloc (buflen);
-	  if (*realname != NULL)
-	    {
-	      memcpy (*realname, buf, buflen);
-	      return fd;
-	    }
-	  else
-	    {
-	      /* No memory for the name, we certainly won't be able
-		 to load and link it.  */
-	      close (fd);
-	      return -1;
-	    }
-	}
-      if (here_any && (err = errno) != ENOENT && err != EACCES)
-	/* The file exists and is readable, but something went wrong.  */
-	return -1;
-
-      /* Remember whether we found anything.  */
-      any |= here_any;
-    }
-  while (*++dirs != NULL);
-
-  /* Remove the whole path if none of the directories exists.  */
-  if (__builtin_expect (! any, 0))
-    {
-      /* Paths which were allocated using the minimal malloc() in ld.so
-	 must not be freed using the general free() in libc.  */
-      if (sps->malloced)
-	free (sps->dirs);
-      sps->dirs = (void *) -1;
-    }
-
-  return -1;
-}
-
-/* Map in the shared object file NAME.  */
-
-struct link_map *
-internal_function
-_dl_map_object (struct link_map *loader, const char *name, int preloaded,
-		int type, int trace_mode, int mode)
-{
-  int fd;
-  char *realname;
-  char *name_copy;
-  struct link_map *l;
-  struct filebuf fb;
-
-  /* Look for this name among those already loaded.  */
-  for (l = _dl_loaded; l; l = l->l_next)
-    {
-      /* If the requested name matches the soname of a loaded object,
-	 use that object.  Elide this check for names that have not
-	 yet been opened.  */
-      if (__builtin_expect (l->l_faked, 0) != 0)
-	continue;
-      if (!_dl_name_match_p (name, l))
-	{
-	  const char *soname;
-
-	  if (__builtin_expect (l->l_soname_added, 1)
-	      || l->l_info[DT_SONAME] == NULL)
-	    continue;
-
-	  soname = ((const char *) D_PTR (l, l_info[DT_STRTAB])
-		    + l->l_info[DT_SONAME]->d_un.d_val);
-	  if (strcmp (name, soname) != 0)
-	    continue;
-
-	  /* We have a match on a new name -- cache it.  */
-	  add_name_to_object (l, soname);
-	  l->l_soname_added = 1;
-	}
-
-      /* We have a match.  */
-      return l;
-    }
-
-  /* Display information if we are debugging.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0) && loader != NULL)
-    _dl_debug_printf ("\nfile=%s;  needed by %s\n", name,
-		      loader->l_name[0] ? loader->l_name : _dl_argv[0]);
-
-  if (strchr (name, '/') == NULL)
-    {
-      /* Search for NAME in several places.  */
-
-      size_t namelen = strlen (name) + 1;
-
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))
-	_dl_debug_printf ("find library=%s; searching\n", name);
-
-      fd = -1;
-
-      /* When the object has the RUNPATH information we don't use any
-         RPATHs.  */
-      if (loader == NULL || loader->l_info[DT_RUNPATH] == NULL)
-	{
-	  /* First try the DT_RPATH of the dependent object that caused NAME
-	     to be loaded.  Then that object's dependent, and on up.  */
-	  for (l = loader; fd == -1 && l; l = l->l_loader)
-	    {
-	      if (l->l_rpath_dirs.dirs == NULL)
-		{
-		  if (l->l_info[DT_RPATH] == NULL)
-		    {
-		      /* There is no path.  */
-		      l->l_rpath_dirs.dirs = (void *) -1;
-		      continue;
-		    }
-		  else
-		    {
-		      /* Make sure the cache information is available.  */
-		      size_t ptrval = (D_PTR (l, l_info[DT_STRTAB])
-				       + l->l_info[DT_RPATH]->d_un.d_val);
-		      decompose_rpath (&l->l_rpath_dirs,
-				       (const char *) ptrval, l, "RPATH");
-		    }
-		}
-
-	      if (l->l_rpath_dirs.dirs != (void *) -1)
-		fd = open_path (name, namelen, preloaded, &l->l_rpath_dirs,
-				&realname, &fb);
-	    }
-
-	  /* If dynamically linked, try the DT_RPATH of the executable
-             itself.  */
-	  l = _dl_loaded;
-	  if (fd == -1 && l && l->l_type != lt_loaded && l != loader
-	      && l->l_rpath_dirs.dirs != (void *) -1)
-	    fd = open_path (name, namelen, preloaded, &l->l_rpath_dirs,
-			    &realname, &fb);
-	}
-
-      /* Try the LD_LIBRARY_PATH environment variable.  */
-      if (fd == -1 && env_path_list.dirs != (void *) -1)
-	fd = open_path (name, namelen, preloaded, &env_path_list,
-			&realname, &fb);
-
-      /* Look at the RUNPATH information for this binary.
-
-	 Note that this is no real loop.  'while' is used only to enable
-	 us to use 'break' instead of a 'goto' to jump to the end.  The
-	 loop is always left after the first round.  */
-      while (fd == -1 && loader != NULL
-	     && loader->l_runpath_dirs.dirs != (void *) -1)
-	{
-	  if (loader->l_runpath_dirs.dirs == NULL)
-	    {
-	      if (loader->l_info[DT_RUNPATH] == NULL)
-		{
-		  /* No RUNPATH.  */
-		  loader->l_runpath_dirs.dirs = (void *) -1;
-		  break;
-		}
-	      else
-		{
-		  /* Make sure the cache information is available.  */
-		  size_t ptrval = (D_PTR (loader, l_info[DT_STRTAB])
-				   + loader->l_info[DT_RUNPATH]->d_un.d_val);
-		  decompose_rpath (&loader->l_runpath_dirs,
-				   (const char *) ptrval, loader, "RUNPATH");
-		}
-	    }
-
-	  if (loader->l_runpath_dirs.dirs != (void *) -1)
-	    fd = open_path (name, namelen, preloaded,
-			    &loader->l_runpath_dirs, &realname, &fb);
-	  break;
-	}
-
-      if (fd == -1
-	  && (__builtin_expect (! preloaded, 1) || ! 0))
-	{
-	  /* Check the list of libraries in the file /etc/ld.so.cache,
-	     for compatibility with Linux's ldconfig program.  */
-	  const char *cached = _dl_load_cache_lookup (name);
-
-	  if (cached != NULL)
-	    {
-#ifdef SHARED
-	      l = loader ?: _dl_loaded;
-#else
-	      l = loader;
-#endif
-
-	      /* If the loader has the DF_1_NODEFLIB flag set we must not
-		 use a cache entry from any of these directories.  */
-	      if (
-#ifndef SHARED
-		  /* 'l' is always != NULL for dynamically linked objects.  */
-		  l != NULL &&
-#endif
-		  __builtin_expect (l->l_flags_1 & DF_1_NODEFLIB, 0))
-		{
-		  const char *dirp = system_dirs;
-		  unsigned int cnt = 0;
-
-		  do
-		    {
-		      if (memcmp (cached, dirp, system_dirs_len[cnt]) == 0)
-			{
-			  /* The prefix matches.  Don't use the entry.  */
-			  cached = NULL;
-			  break;
-			}
-
-		      dirp += system_dirs_len[cnt] + 1;
-		      ++cnt;
-		    }
-		  while (cnt < nsystem_dirs_len);
-		}
-
-	      if (cached != NULL)
-		{
-		  fd = open_verify (cached, &fb);
-		  if (__builtin_expect (fd != -1, 1))
-		    {
-		      realname = local_strdup (cached);
-		      if (realname == NULL)
-			{
-			  close (fd);
-			  fd = -1;
-			}
-		    }
-		}
-	    }
-	}
-
-      /* Finally, try the default path.  */
-      if (fd == -1
-	  && ((l = loader ?: _dl_loaded)
-	      /* 'l' is always != NULL for dynamically linked objects.  */
-#ifdef SHARED
-	      ,
-#else
-	      == NULL ||
-#endif
-	      __builtin_expect (!(l->l_flags_1 & DF_1_NODEFLIB), 1))
-	  && rtld_search_dirs.dirs != (void *) -1)
-	fd = open_path (name, namelen, preloaded, &rtld_search_dirs,
-			&realname, &fb);
-
-      /* Add another newline when we a tracing the library loading.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_LIBS, 0))
-        _dl_debug_printf ("\n");
-    }
-  else
-    {
-      /* The path may contain dynamic string tokens.  */
-      realname = (loader
-		  ? expand_dynamic_string_token (loader, name)
-		  : local_strdup (name));
-      if (realname == NULL)
-	fd = -1;
-      else
-	{
-	  fd = open_verify (realname, &fb);
-	  if (__builtin_expect (fd, 0) == -1)
-	    free (realname);
-	}
-    }
-
-  if (__builtin_expect (fd, 0) == -1)
-    {
-      if (trace_mode)
-	{
-	  /* We haven't found an appropriate library.  But since we
-	     are only interested in the list of libraries this isn't
-	     so severe.  Fake an entry with all the information we
-	     have.  */
-	  static const Elf_Symndx dummy_bucket = STN_UNDEF;
-
-	  /* Enter the new object in the list of loaded objects.  */
-	  if ((name_copy = local_strdup (name)) == NULL
-	      || (l = _dl_new_object (name_copy, name, type, loader)) == NULL)
-	    _dl_signal_error (ENOMEM, name, NULL,
-			      N_("cannot create shared object descriptor"));
-	  /* Signal that this is a faked entry.  */
-	  l->l_faked = 1;
-	  /* Since the descriptor is initialized with zero we do not
-	     have do this here.
-	  l->l_reserved = 0; */
-	  l->l_buckets = &dummy_bucket;
-	  l->l_nbuckets = 1;
-	  l->l_relocated = 1;
-
-	  return l;
-	}
-      else
-	_dl_signal_error (errno, name, NULL,
-			  N_("cannot open shared object file"));
-    }
-
-  return _dl_map_object_from_fd (name, fd, &fb, realname, loader, type, mode);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-lookup.c b/newlib/libc/sys/linux/dl/dl-lookup.c
deleted file mode 100644
index 9fc296cf1..000000000
--- a/newlib/libc/sys/linux/dl/dl-lookup.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/* Look up a symbol in the loaded objects.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include "dl-hash.h"
-#include <machine/dl-machine.h>
-#include <bits/libc-lock.h>
-
-#include <assert.h>
-
-#define VERSTAG(tag)	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGIDX (tag))
-
-/* We need this string more than once.  */
-static const char undefined_msg[] = "undefined symbol: ";
-
-
-struct sym_val
-  {
-    const ElfW(Sym) *s;
-    struct link_map *m;
-  };
-
-
-#define make_string(string, rest...) \
-  ({									      \
-    const char *all[] = { string, ## rest };				      \
-    size_t len, cnt;							      \
-    char *result, *cp;							      \
-									      \
-    len = 1;								      \
-    for (cnt = 0; cnt < sizeof (all) / sizeof (all[0]); ++cnt)		      \
-      len += strlen (all[cnt]);						      \
-									      \
-    cp = result = alloca (len);						      \
-    for (cnt = 0; cnt < sizeof (all) / sizeof (all[0]); ++cnt)		      \
-    {                                                                         \
-      cp = strcpy (cp, all[cnt]);					      \
-      cp += strlen(all[cnt]);                                                 \
-    }                                                                         \
-									      \
-    result;								      \
-  })
-
-/* Statistics function.  */
-unsigned long int _dl_num_relocations;
-
-
-/* We have two different situations when looking up a simple: with or
-   without versioning.  gcc is not able to optimize a single function
-   definition serving for both purposes so we define two functions.  */
-#define VERSIONED	0
-#include "do-lookup.h"
-
-#define VERSIONED	1
-#include "do-lookup.h"
-
-
-/* Add extra dependency on MAP to UNDEF_MAP.  */
-static int
-internal_function
-add_dependency (struct link_map *undef_map, struct link_map *map)
-{
-  struct link_map **list;
-  struct link_map *runp;
-  unsigned int act;
-  unsigned int i;
-  int result = 0;
-
-  /* Avoid self-references.  */
-  if (undef_map == map)
-    return 0;
-
-  /* Make sure nobody can unload the object while we are at it.  */
-#ifdef HAVE_DD_LOCK
-    __lock_acquire(_dl_load_lock);
-#endif
-
-
-  /* Determine whether UNDEF_MAP already has a reference to MAP.  First
-     look in the normal dependencies.  */
-  if (undef_map->l_searchlist.r_list != NULL)
-    {
-      list = undef_map->l_initfini;
-
-      for (i = 0; list[i] != NULL; ++i)
-	if (list[i] == map)
-	  goto out;
-    }
-
-  /* No normal dependency.  See whether we already had to add it
-     to the special list of dynamic dependencies.  */
-  list = undef_map->l_reldeps;
-  act = undef_map->l_reldepsact;
-
-  for (i = 0; i < act; ++i)
-    if (list[i] == map)
-      goto out;
-
-  /* The object is not yet in the dependency list.  Before we add
-     it make sure just one more time the object we are about to
-     reference is still available.  There is a brief period in
-     which the object could have been removed since we found the
-     definition.  */
-  runp = _dl_loaded;
-  while (runp != NULL && runp != map)
-    runp = runp->l_next;
-
-  if (runp != NULL)
-    {
-      /* The object is still available.  Add the reference now.  */
-      if (__builtin_expect (act >= undef_map->l_reldepsmax, 0))
-	{
-	  /* Allocate more memory for the dependency list.  Since this
-	     can never happen during the startup phase we can use
-	     `realloc'.  */
-	  void *newp;
-
-	  undef_map->l_reldepsmax += 5;
-	  newp = realloc (undef_map->l_reldeps,
-			  undef_map->l_reldepsmax
-			  * sizeof (struct link_map *));
-
-	  if (__builtin_expect (newp != NULL, 1))
-	    undef_map->l_reldeps = (struct link_map **) newp;
-	  else
-	    /* Correct the addition.  */
-	    undef_map->l_reldepsmax -= 5;
-	}
-
-      /* If we didn't manage to allocate memory for the list this is
-	 no fatal mistake.  We simply increment the use counter of the
-	 referenced object and don't record the dependencies.  This
-	 means this increment can never be reverted and the object
-	 will never be unloaded.  This is semantically the correct
-	 behaviour.  */
-      if (__builtin_expect (act < undef_map->l_reldepsmax, 1))
-	undef_map->l_reldeps[undef_map->l_reldepsact++] = map;
-
-      if (map->l_searchlist.r_list != NULL)
-	/* And increment the counter in the referenced object.  */
-	++map->l_opencount;
-      else
-	/* We have to bump the counts for all dependencies since so far
-	   this object was only a normal or transitive dependency.
-	   Now it might be closed with _dl_close() directly.  */
-	for (list = map->l_initfini; *list != NULL; ++list)
-	  ++(*list)->l_opencount;
-
-      /* Display information if we are debugging.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-	_dl_debug_printf ("\
-\nfile=%s;  needed by %s (relocation dependency)\n\n",
-			  map->l_name[0] ? map->l_name : _dl_argv[0],
-			  undef_map->l_name[0]
-			  ? undef_map->l_name : _dl_argv[0]);
-    }
-  else
-    /* Whoa, that was bad luck.  We have to search again.  */
-    result = -1;
-
- out:
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-    __lock_release(_dl_load_lock);
-#endif
-
-
-  return result;
-}
-
-static int
-internal_function
-_dl_do_lookup (const char *undef_name, unsigned long int hash,
-	       const ElfW(Sym) *ref, struct sym_val *result,
-	       struct r_scope_elem *scope, size_t i,
-	       struct link_map *skip, int type_class);
-static int
-internal_function
-_dl_do_lookup_versioned (const char *undef_name, unsigned long int hash,
-			 const ElfW(Sym) *ref, struct sym_val *result,
-			 struct r_scope_elem *scope, size_t i,
-			 const struct r_found_version *const version,
-			 struct link_map *skip, int type_class);
-
-
-/* Search loaded objects' symbol tables for a definition of the symbol
-   UNDEF_NAME.  */
-
-lookup_t
-internal_function
-_dl_lookup_symbol (const char *undef_name, struct link_map *undef_map,
-		   const ElfW(Sym) **ref, struct r_scope_elem *symbol_scope[],
-		   int type_class, int explicit)
-{
-  unsigned long int hash = _dl_elf_hash (undef_name);
-  struct sym_val current_value = { NULL, NULL };
-  struct r_scope_elem **scope;
-  int protected;
-
-  ++_dl_num_relocations;
-
-  /* Search the relevant loaded objects for a definition.  */
-  for (scope = symbol_scope; *scope; ++scope)
-    if (do_lookup (undef_name, hash, *ref, &current_value, *scope, 0, NULL,
-		   type_class))
-      {
-	/* We have to check whether this would bind UNDEF_MAP to an object
-	   in the global scope which was dynamically loaded.  In this case
-	   we have to prevent the latter from being unloaded unless the
-	   UNDEF_MAP object is also unloaded.  */
-	if (__builtin_expect (current_value.m->l_type == lt_loaded, 0)
-	    /* Don't do this for explicit lookups as opposed to implicit
-	       runtime lookups.  */
-	    && ! explicit
-	    /* Add UNDEF_MAP to the dependencies.  */
-	    && add_dependency (undef_map, current_value.m) < 0)
-	  /* Something went wrong.  Perhaps the object we tried to reference
-	     was just removed.  Try finding another definition.  */
-	  return _dl_lookup_symbol (undef_name, undef_map, ref, symbol_scope,
-				    type_class, 0);
-
-	break;
-      }
-
-  if (__builtin_expect (current_value.s == NULL, 0))
-    {
-      const char *reference_name = undef_map ? undef_map->l_name : NULL;
-
-      if (*ref == NULL || ELFW(ST_BIND) ((*ref)->st_info) != STB_WEAK)
-	/* We could find no value for a strong reference.  */
-	/* XXX We cannot translate the messages.  */
-	_dl_signal_cerror (0, (reference_name && reference_name[0]
-			       ? reference_name
-			       : (_dl_argv[0] ?: "<main program>")),
-			   N_("relocation error"),
-			   make_string (undefined_msg, undef_name));
-      *ref = NULL;
-      return 0;
-    }
-
-  protected = *ref && ELFW(ST_VISIBILITY) ((*ref)->st_other) == STV_PROTECTED;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_BINDINGS, 0))
-    {
-      const char *reference_name = undef_map ? undef_map->l_name : NULL;
-
-      _dl_debug_printf ("binding file %s to %s: %s symbol `%s'\n",
-			(reference_name && reference_name[0]
-			 ? reference_name : (_dl_argv[0] ?: "<main program>")),
-			current_value.m->l_name[0]
-			? current_value.m->l_name : _dl_argv[0],
-			protected ? "protected" : "normal", undef_name);
-    }
-
-  if (__builtin_expect (protected == 0, 1))
-    {
-      *ref = current_value.s;
-      return LOOKUP_VALUE (current_value.m);
-    }
-  else
-    {
-      /* It is very tricky. We need to figure out what value to
-         return for the protected symbol */
-      struct sym_val protected_value = { NULL, NULL };
-
-      for (scope = symbol_scope; *scope; ++scope)
-	if (_dl_do_lookup (undef_name, hash, *ref, &protected_value, *scope,
-			   0, NULL, ELF_RTYPE_CLASS_PLT))
-	  break;
-
-      if (protected_value.s == NULL || protected_value.m == undef_map)
-	{
-	  *ref = current_value.s;
-	  return LOOKUP_VALUE (current_value.m);
-	}
-
-      return LOOKUP_VALUE (undef_map);
-    }
-}
-
-
-/* This function is nearly the same as `_dl_lookup_symbol' but it
-   skips in the first list all objects until SKIP_MAP is found.  I.e.,
-   it only considers objects which were loaded after the described
-   object.  If there are more search lists the object described by
-   SKIP_MAP is only skipped.  */
-lookup_t
-internal_function
-_dl_lookup_symbol_skip (const char *undef_name,
-			struct link_map *undef_map, const ElfW(Sym) **ref,
-			struct r_scope_elem *symbol_scope[],
-			struct link_map *skip_map)
-{
-  const char *reference_name = undef_map ? undef_map->l_name : NULL;
-  const unsigned long int hash = _dl_elf_hash (undef_name);
-  struct sym_val current_value = { NULL, NULL };
-  struct r_scope_elem **scope;
-  size_t i;
-  int protected;
-
-  ++_dl_num_relocations;
-
-  /* Search the relevant loaded objects for a definition.  */
-  scope = symbol_scope;
-  for (i = 0; (*scope)->r_list[i] != skip_map; ++i)
-    assert (i < (*scope)->r_nlist);
-
-  if (! _dl_do_lookup (undef_name, hash, *ref, &current_value, *scope, i,
-		       skip_map, 0))
-    while (*++scope)
-      if (_dl_do_lookup (undef_name, hash, *ref, &current_value, *scope, 0,
-			 skip_map, 0))
-	break;
-
-  if (__builtin_expect (current_value.s == NULL, 0))
-    {
-      *ref = NULL;
-      return 0;
-    }
-
-  protected = *ref && ELFW(ST_VISIBILITY) ((*ref)->st_other) == STV_PROTECTED;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_BINDINGS, 0))
-    _dl_debug_printf ("binding file %s to %s: %s symbol `%s'\n",
-		       (reference_name && reference_name[0]
-			? reference_name : (_dl_argv[0] ?: "<main program>")),
-		       current_value.m->l_name[0]
-		       ? current_value.m->l_name : _dl_argv[0],
-		       protected ? "protected" : "normal", undef_name);
-
-  if (__builtin_expect (protected == 0, 1))
-    {
-      *ref = current_value.s;
-      return LOOKUP_VALUE (current_value.m);
-    }
-  else
-    {
-      /* It is very tricky.  We need to figure out what value to
-         return for the protected symbol.  */
-      struct sym_val protected_value = { NULL, NULL };
-
-      if (i >= (*scope)->r_nlist
-	  || !_dl_do_lookup (undef_name, hash, *ref, &protected_value, *scope,
-			     i, skip_map, ELF_RTYPE_CLASS_PLT))
-	while (*++scope)
-	  if (_dl_do_lookup (undef_name, hash, *ref, &protected_value, *scope,
-			     0, skip_map, ELF_RTYPE_CLASS_PLT))
-	    break;
-
-      if (protected_value.s == NULL || protected_value.m == undef_map)
-	{
-	  *ref = current_value.s;
-	  return LOOKUP_VALUE (current_value.m);
-	}
-
-      return LOOKUP_VALUE (undef_map);
-    }
-}
-
-
-/* This function works like _dl_lookup_symbol but it takes an
-   additional arguement with the version number of the requested
-   symbol.
-
-   XXX We'll see whether we need this separate function.  */
-lookup_t
-internal_function
-_dl_lookup_versioned_symbol (const char *undef_name,
-			     struct link_map *undef_map, const ElfW(Sym) **ref,
-			     struct r_scope_elem *symbol_scope[],
-			     const struct r_found_version *version,
-			     int type_class, int explicit)
-{
-  unsigned long int hash = _dl_elf_hash (undef_name);
-  struct sym_val current_value = { NULL, NULL };
-  struct r_scope_elem **scope;
-  int protected;
-
-  ++_dl_num_relocations;
-
-  /* Search the relevant loaded objects for a definition.  */
-  for (scope = symbol_scope; *scope; ++scope)
-    {
-      int res = do_lookup_versioned (undef_name, hash, *ref, &current_value,
-				     *scope, 0, version, NULL, type_class);
-      if (res > 0)
-	{
-	  /* We have to check whether this would bind UNDEF_MAP to an object
-	     in the global scope which was dynamically loaded.  In this case
-	     we have to prevent the latter from being unloaded unless the
-	     UNDEF_MAP object is also unloaded.  */
-	  if (__builtin_expect (current_value.m->l_type == lt_loaded, 0)
-	      /* Don't do this for explicit lookups as opposed to implicit
-		 runtime lookups.  */
-	      && ! explicit
-	      /* Add UNDEF_MAP to the dependencies.  */
-	      && add_dependency (undef_map, current_value.m) < 0)
-	    /* Something went wrong.  Perhaps the object we tried to reference
-	       was just removed.  Try finding another definition.  */
-	    return _dl_lookup_versioned_symbol (undef_name, undef_map, ref,
-						symbol_scope, version,
-						type_class, 0);
-
-	  break;
-	}
-
-      if (__builtin_expect (res, 0) < 0)
-	{
-	  /* Oh, oh.  The file named in the relocation entry does not
-	     contain the needed symbol.  */
-	  const char *reference_name = undef_map ? undef_map->l_name : NULL;
-
-	  /* XXX We cannot translate the message.  */
-	  _dl_signal_cerror (0, (reference_name && reference_name[0]
-				 ? reference_name
-				 : (_dl_argv[0] ?: "<main program>")),
-			     N_("relocation error"),
-			     make_string ("symbol ", undef_name, ", version ",
-					  version->name,
-					  " not defined in file ",
-					  version->filename,
-					  " with link time reference",
-					  res == -2
-					  ? " (no version symbols)" : ""));
-	  *ref = NULL;
-	  return 0;
-	}
-    }
-
-  if (__builtin_expect (current_value.s == NULL, 0))
-    {
-      if (*ref == NULL || ELFW(ST_BIND) ((*ref)->st_info) != STB_WEAK)
-	{
-	  /* We could find no value for a strong reference.  */
-	  const char *reference_name = undef_map ? undef_map->l_name : NULL;
-
-	  /* XXX We cannot translate the message.  */
-	  _dl_signal_cerror (0, (reference_name && reference_name[0]
-				 ? reference_name
-				 : (_dl_argv[0] ?: "<main program>")), NULL,
-			     make_string (undefined_msg, undef_name,
-					  ", version ",
-					  version->name ?: NULL));
-	}
-      *ref = NULL;
-      return 0;
-    }
-
-  protected = *ref && ELFW(ST_VISIBILITY) ((*ref)->st_other) == STV_PROTECTED;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_BINDINGS, 0))
-    {
-      const char *reference_name = undef_map ? undef_map->l_name : NULL;
-
-      _dl_debug_printf ("binding file %s to %s: %s symbol `%s' [%s]\n",
-			(reference_name && reference_name[0]
-			 ? reference_name : (_dl_argv[0] ?: "<main program>")),
-			current_value.m->l_name[0]
-			? current_value.m->l_name : _dl_argv[0],
-			protected ? "protected" : "normal",
-			undef_name, version->name);
-    }
-
-  if (__builtin_expect (protected == 0, 1))
-    {
-      *ref = current_value.s;
-      return LOOKUP_VALUE (current_value.m);
-    }
-  else
-    {
-      /* It is very tricky. We need to figure out what value to
-         return for the protected symbol */
-      struct sym_val protected_value = { NULL, NULL };
-
-      for (scope = symbol_scope; *scope; ++scope)
-	if (_dl_do_lookup_versioned (undef_name, hash, *ref, &protected_value,
-				     *scope, 0, version, NULL,
-				     ELF_RTYPE_CLASS_PLT))
-	  break;
-
-      if (protected_value.s == NULL || protected_value.m == undef_map)
-	{
-	  *ref = current_value.s;
-	  return LOOKUP_VALUE (current_value.m);
-	}
-
-      return LOOKUP_VALUE (undef_map);
-    }
-}
-
-
-/* Similar to _dl_lookup_symbol_skip but takes an additional argument
-   with the version we are looking for.  */
-lookup_t
-internal_function
-_dl_lookup_versioned_symbol_skip (const char *undef_name,
-				  struct link_map *undef_map,
-				  const ElfW(Sym) **ref,
-				  struct r_scope_elem *symbol_scope[],
-				  const struct r_found_version *version,
-				  struct link_map *skip_map)
-{
-  const char *reference_name = undef_map ? undef_map->l_name : NULL;
-  const unsigned long int hash = _dl_elf_hash (undef_name);
-  struct sym_val current_value = { NULL, NULL };
-  struct r_scope_elem **scope;
-  size_t i;
-  int protected;
-
-  ++_dl_num_relocations;
-
-  /* Search the relevant loaded objects for a definition.  */
-  scope = symbol_scope;
-  for (i = 0; (*scope)->r_list[i] != skip_map; ++i)
-    assert (i < (*scope)->r_nlist);
-
-  if (! _dl_do_lookup_versioned (undef_name, hash, *ref, &current_value,
-				 *scope, i, version, skip_map, 0))
-    while (*++scope)
-      if (_dl_do_lookup_versioned (undef_name, hash, *ref, &current_value,
-				   *scope, 0, version, skip_map, 0))
-	break;
-
-  if (__builtin_expect (current_value.s == NULL, 0))
-    {
-      if (*ref == NULL || ELFW(ST_BIND) ((*ref)->st_info) != STB_WEAK)
-	{
-	  /* We could find no value for a strong reference.  */
-	  const size_t len = strlen (undef_name);
-	  char buf[sizeof undefined_msg + len];
-          char *tmp;
-          tmp = memcpy (buf, undefined_msg, sizeof undefined_msg - 1);
-          tmp += (sizeof undefined_msg - 1);
-
-	  memcpy (tmp, undef_name, len + 1);
-
-	  /* XXX We cannot translate the messages.  */
-	  _dl_signal_cerror (0, (reference_name && reference_name[0]
-				 ? reference_name
-				 : (_dl_argv[0] ?: "<main program>")),
-			     NULL, buf);
-	}
-      *ref = NULL;
-      return 0;
-    }
-
-  protected = *ref && ELFW(ST_VISIBILITY) ((*ref)->st_other) == STV_PROTECTED;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_BINDINGS, 0))
-    _dl_debug_printf ("binding file %s to %s: %s symbol `%s' [%s]\n",
-		      (reference_name && reference_name[0]
-		       ? reference_name : (_dl_argv[0] ?: "<main program>")),
-		      current_value.m->l_name[0]
-		      ? current_value.m->l_name : _dl_argv[0],
-		      protected ? "protected" : "normal",
-		      undef_name, version->name);
-
-  if (__builtin_expect (protected == 0, 1))
-    {
-      *ref = current_value.s;
-      return LOOKUP_VALUE (current_value.m);
-    }
-  else
-    {
-      /* It is very tricky. We need to figure out what value to
-         return for the protected symbol */
-      struct sym_val protected_value = { NULL, NULL };
-
-      if (i >= (*scope)->r_nlist
-	  || !_dl_do_lookup_versioned (undef_name, hash, *ref,
-				       &protected_value, *scope, i, version,
-				       skip_map, ELF_RTYPE_CLASS_PLT))
-	while (*++scope)
-	  if (_dl_do_lookup_versioned (undef_name, hash, *ref,
-				       &protected_value, *scope, 0, version,
-				       skip_map, ELF_RTYPE_CLASS_PLT))
-	    break;
-
-      if (protected_value.s == NULL || protected_value.m == undef_map)
-	{
-	  *ref = current_value.s;
-	  return LOOKUP_VALUE (current_value.m);
-	}
-
-      return LOOKUP_VALUE (undef_map);
-    }
-}
-
-
-/* Cache the location of MAP's hash table.  */
-
-void
-internal_function
-_dl_setup_hash (struct link_map *map)
-{
-  Elf_Symndx *hash;
-  Elf_Symndx nchain;
-
-  if (!map->l_info[DT_HASH])
-    return;
-  hash = (void *)(map->l_addr + map->l_info[DT_HASH]->d_un.d_ptr);
-
-  map->l_nbuckets = *hash++;
-  nchain = *hash++;
-  map->l_buckets = hash;
-  hash += map->l_nbuckets;
-  map->l_chain = hash;
-}
-
-/* These are here so that we only inline do_lookup{,_versioned} in the common
-   case, not everywhere.  */
-static int
-internal_function
-_dl_do_lookup (const char *undef_name, unsigned long int hash,
-	       const ElfW(Sym) *ref, struct sym_val *result,
-	       struct r_scope_elem *scope, size_t i,
-	       struct link_map *skip, int type_class)
-{
-  return do_lookup (undef_name, hash, ref, result, scope, i, skip,
-		    type_class);
-}
-
-static int
-internal_function
-_dl_do_lookup_versioned (const char *undef_name, unsigned long int hash,
-			 const ElfW(Sym) *ref, struct sym_val *result,
-			 struct r_scope_elem *scope, size_t i,
-			 const struct r_found_version *const version,
-			 struct link_map *skip, int type_class)
-{
-  return do_lookup_versioned (undef_name, hash, ref, result, scope, i,
-			      version, skip, type_class);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-lookupcfg.h b/newlib/libc/sys/linux/dl/dl-lookupcfg.h
deleted file mode 100644
index 810e8c7c6..000000000
--- a/newlib/libc/sys/linux/dl/dl-lookupcfg.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Configuration of lookup functions.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Some platforms need more information from the symbol lookup function
-   than just the address.  But this is not generally the case.  */
-#undef DL_LOOKUP_RETURNS_MAP
diff --git a/newlib/libc/sys/linux/dl/dl-minimal.c b/newlib/libc/sys/linux/dl/dl-minimal.c
deleted file mode 100644
index 807bfad63..000000000
--- a/newlib/libc/sys/linux/dl/dl-minimal.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/* Minimal replacements for basic facilities used in the dynamic linker.
-   Copyright (C) 1995,96,97,98,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <limits.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <ldsodefs.h>
-#include <machine/weakalias.h>
-
-#include <assert.h>
-
-/* Minimal `malloc' allocator for use while loading shared libraries.
-   No block is ever freed.  */
-
-static void *alloc_ptr, *alloc_end, *alloc_last_block;
-
-/* Declarations of global functions.  */
-extern void weak_function free (void *ptr);
-extern void * weak_function realloc (void *ptr, size_t n);
-extern unsigned long int weak_function __strtoul_internal
-(const char *nptr, char **endptr, int base, int group);
-extern unsigned long int weak_function strtoul (const char *nptr,
-						char **endptr, int base);
-
-
-void * weak_function
-malloc (size_t n)
-{
-#ifdef MAP_ANON
-#define	_dl_zerofd (-1)
-#else
-  extern int _dl_zerofd;
-
-  if (_dl_zerofd == -1)
-    _dl_zerofd = _dl_sysdep_open_zero_fill ();
-#define MAP_ANON 0
-#endif
-
-  if (alloc_end == 0)
-    {
-      /* Consume any unused space in the last page of our data segment.  */
-      extern int _end;
-      alloc_ptr = &_end;
-      alloc_end = (void *) 0 + (((alloc_ptr - (void *) 0) + _dl_pagesize - 1)
-				& ~(_dl_pagesize - 1));
-    }
-
-  /* Make sure the allocation pointer is ideally aligned.  */
-  alloc_ptr = (void *) 0 + (((alloc_ptr - (void *) 0) + sizeof (double) - 1)
-			    & ~(sizeof (double) - 1));
-
-  if (alloc_ptr + n >= alloc_end)
-    {
-      /* Insufficient space left; allocate another page.  */
-      caddr_t page;
-      size_t nup = (n + _dl_pagesize - 1) & ~(_dl_pagesize - 1);
-      page = __mmap (0, nup, PROT_READ|PROT_WRITE,
-		     MAP_ANON|MAP_PRIVATE, _dl_zerofd, 0);
-      assert (page != MAP_FAILED);
-      if (page != alloc_end)
-	alloc_ptr = page;
-      alloc_end = page + nup;
-    }
-
-  alloc_last_block = (void *) alloc_ptr;
-  alloc_ptr += n;
-  return alloc_last_block;
-}
-
-/* We use this function occasionally since the real implementation may
-   be optimized when it can assume the memory it returns already is
-   set to NUL.  */
-void * weak_function
-calloc (size_t nmemb, size_t size)
-{
-  size_t total = nmemb * size;
-  void *result = malloc (total);
-  return memset (result, '\0', total);
-}
-
-/* This will rarely be called.  */
-void weak_function
-free (void *ptr)
-{
-  /* We can free only the last block allocated.  */
-  if (ptr == alloc_last_block)
-    alloc_ptr = alloc_last_block;
-}
-
-/* This is only called with the most recent block returned by malloc.  */
-void * weak_function
-realloc (void *ptr, size_t n)
-{
-  void *new;
-  if (ptr == NULL)
-    return malloc (n);
-  assert (ptr == alloc_last_block);
-  alloc_ptr = alloc_last_block;
-  new = malloc (n);
-  assert (new == ptr);
-  return new;
-}
-
-
-/* Define our own version of the internal function used by strerror.  We
-   only provide the messages for some common errors.  This avoids pulling
-   in the whole error list.  */
-
-char * weak_function
-__strerror_r (int errnum, char *buf, size_t buflen)
-{
-  char *msg;
-
-  switch (errnum)
-    {
-    case ENOMEM:
-      msg = (char *) "Cannot allocate memory";
-      break;
-    case EINVAL:
-      msg = (char *) "Invalid argument";
-      break;
-    case ENOENT:
-      msg = (char *) "No such file or directory";
-      break;
-    case EPERM:
-      msg = (char *) "Operation not permitted";
-      break;
-    case EIO:
-      msg = (char *) "Input/output error";
-      break;
-    case EACCES:
-      msg = (char *) "Permission denied";
-      break;
-    default:
-      /* No need to check buffer size, all calls in the dynamic linker
-	 provide enough space.  */
-      msg = (char *) "Error";
-      break;
-    }
-
-  return msg;
-}
-
-#ifndef NDEBUG
-
-/* Define (weakly) our own assert failure function which doesn't use stdio.
-   If we are linked into the user program (-ldl), the normal __assert_fail
-   defn can override this one.  */
-
-void weak_function
-__assert_fail (const char *assertion,
-	       const char *file, unsigned int line, const char *function)
-{
-  _dl_fatal_printf ("\
-Inconsistency detected by ld.so: %s: %u: %s%sAssertion `%s' failed!\n",
-		    file, line, function ?: "", function ? ": " : "",
-		    assertion);
-
-}
-
-void weak_function
-__assert_perror_fail (int errnum,
-		      const char *file, unsigned int line,
-		      const char *function)
-{
-  char errbuf[64];
-  _dl_fatal_printf ("\
-Inconsistency detected by ld.so: %s: %u: %s%sUnexpected error: %s\n",
-		    file, line, function ?: "", function ? ": " : "",
-		    __strerror_r (errnum, errbuf, sizeof (errbuf)));
-}
-
-#endif
-
-unsigned long int weak_function
-__strtoul_internal (const char *nptr, char **endptr, int base, int group)
-{
-  unsigned long int result = 0;
-  long int sign = 1;
-
-  while (*nptr == ' ' || *nptr == '\t')
-    ++nptr;
-
-  if (*nptr == '-')
-    {
-      sign = -1;
-      ++nptr;
-    }
-  else if (*nptr == '+')
-    ++nptr;
-
-  if (*nptr < '0' || *nptr > '9')
-    {
-      if (endptr != NULL)
-	*endptr = (char *) nptr;
-      return 0UL;
-    }
-
-  assert (base == 0);
-  base = 10;
-  if (*nptr == '0')
-    {
-      if (nptr[1] == 'x' || nptr[1] == 'X')
-	{
-	  base = 16;
-	  nptr += 2;
-	}
-      else
-	base = 8;
-    }
-
-  while (*nptr >= '0' && *nptr <= '9')
-    {
-      unsigned long int digval = *nptr - '0';
-      if (result > LONG_MAX / 10
-	  || (result == ULONG_MAX / 10 && digval > ULONG_MAX % 10))
-	{
-	  errno = ERANGE;
-	  if (endptr != NULL)
-	    *endptr = (char *) nptr;
-	  return ULONG_MAX;
-	}
-      result *= base;
-      result += digval;
-      ++nptr;
-    }
-
-  if (endptr != NULL)
-    *endptr = (char *) nptr;
-  return result * sign;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-misc.c b/newlib/libc/sys/linux/dl/dl-misc.c
deleted file mode 100644
index 1a4c297d5..000000000
--- a/newlib/libc/sys/linux/dl/dl-misc.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Miscellaneous support functions for dynamic linker
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <fcntl.h>
-#include <ldsodefs.h>
-#include <limits.h>
-#include <link.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/uio.h>
-
-#ifndef MAP_ANON
-/* This is the only dl-sysdep.c function that is actually needed at run-time
-   by _dl_map_object.  */
-
-int
-_dl_sysdep_open_zero_fill (void)
-{
-  return __open ("/dev/zero", O_RDONLY);
-}
-#endif
-
-/* Read the whole contents of FILE into new mmap'd space with given
-   protections.  *SIZEP gets the size of the file.  On error MAP_FAILED
-   is returned.  */
-
-void *
-internal_function
-_dl_sysdep_read_whole_file (const char *file, size_t *sizep, int prot)
-{
-  void *result = MAP_FAILED;
-  struct stat64 st;
-  int fd = __open (file, O_RDONLY);
-  if (fd >= 0)
-    {
-      if (fstat64 (fd, &st) >= 0)
-	{
-	  *sizep = st.st_size;
-
-	  /* No need to map the file if it is empty.  */
-	  if (*sizep != 0)
-	    /* Map a copy of the file contents.  */
-	    result = mmap (NULL, *sizep, prot,
-#ifdef MAP_COPY
-			     MAP_COPY
-#else
-			     MAP_PRIVATE
-#endif
-#ifdef MAP_FILE
-			     | MAP_FILE
-#endif
-			     , fd, 0);
-	}
-      close (fd);
-    }
-  return result;
-}
-
-
-/* Descriptor to write debug messages to.  */
-int _dl_debug_fd = 2;
-
-
-/* Bare-bone printf implementation.  This function only knows about
-   the formats and flags needed and can handle only up to 64 stripes in
-   the output.  */
-static void
-_dl_debug_vdprintf (int fd, int tag_p, const char *fmt, va_list arg)
-{
-  const int niovmax = 64;
-  struct iovec iov[niovmax];
-  int niov = 0;
-  pid_t pid = 0;
-  char pidbuf[7];
-
-  while (*fmt != '\0')
-    {
-      const char *startp = fmt;
-
-      if (tag_p > 0)
-	{
-	  /* Generate the tag line once.  It consists of the PID and a
-	     colon followed by a tab.  */
-	  if (pid == 0)
-	    {
-	      char *p = "0";
-	      pid = __getpid ();
-	      assert (pid >= 0 && pid < 100000);
-	      while (p > pidbuf)
-		*--p = '0';
-	      pidbuf[5] = ':';
-	      pidbuf[6] = '\t';
-	    }
-
-	  /* Append to the output.  */
-	  assert (niov < niovmax);
-	  iov[niov].iov_len = 7;
-	  iov[niov++].iov_base = pidbuf;
-
-	  /* No more tags until we see the next newline.  */
-	  tag_p = -1;
-	}
-
-      /* Skip everything except % and \n (if tags are needed).  */
-      while (*fmt != '\0' && *fmt != '%' && (! tag_p || *fmt != '\n'))
-	++fmt;
-
-      /* Append constant string.  */
-      assert (niov < niovmax);
-      if ((iov[niov].iov_len = fmt - startp) != 0)
-	iov[niov++].iov_base = (char *) startp;
-
-      if (*fmt == '%')
-	{
-	  /* It is a format specifier.  */
-	  char fill = ' ';
-	  int width = -1;
-#if LONG_MAX != INT_MAX
-	  int long_mod = 0;
-#endif
-
-	  /* Recognize zero-digit fill flag.  */
-	  if (*++fmt == '0')
-	    {
-	      fill = '0';
-	      ++fmt;
-	    }
-
-	  /* See whether with comes from a parameter.  Note that no other
-	     way to specify the width is implemented.  */
-	  if (*fmt == '*')
-	    {
-	      width = va_arg (arg, int);
-	      ++fmt;
-	    }
-
-	  /* Recognize the l modifier.  It is only important on some
-	     platforms where long and int have a different size.  We
-	     can use the same code for size_t.  */
-	  if (*fmt == 'l' || *fmt == 'Z')
-	    {
-#if LONG_MAX != INT_MAX
-	      long_mod = 1;
-#endif
-	      ++fmt;
-	    }
-
-	  switch (*fmt)
-	    {
-	      /* Integer formatting.  */
-	    case 'u':
-	    case 'x':
-	      {
-		/* We have to make a difference if long and int have a
-		   different size.  */
-#if LONG_MAX != INT_MAX
-		unsigned long int num = (long_mod
-					 ? va_arg (arg, unsigned long int)
-					 : va_arg (arg, unsigned int));
-#else
-		unsigned long int num = va_arg (arg, unsigned int);
-#endif
-		/* We use alloca() to allocate the buffer with the most
-		   pessimistic guess for the size.  Using alloca() allows
-		   having more than one integer formatting in a call.  */
-		char *buf = (char *) alloca (3 * sizeof (unsigned long int));
-		char *endp = &buf[3 * sizeof (unsigned long int)];
-		char *cp = "0"; 
-
-		/* Pad to the width the user specified.  */
-		if (width != -1)
-		  while (endp - cp < width)
-		    *--cp = fill;
-
-		iov[niov].iov_base = cp;
-		iov[niov].iov_len = endp - cp;
-		++niov;
-	      }
-	      break;
-
-	    case 's':
-	      /* Get the string argument.  */
-	      iov[niov].iov_base = va_arg (arg, char *);
-	      iov[niov].iov_len = strlen (iov[niov].iov_base);
-	      ++niov;
-	      break;
-
-	    case '%':
-	      iov[niov].iov_base = (void *) fmt;
-	      iov[niov].iov_len = 1;
-	      ++niov;
-	      break;
-
-	    default:
-	      assert (! "invalid format specifier");
-	    }
-	  ++fmt;
-	}
-      else if (*fmt == '\n')
-	{
-	  /* See whether we have to print a single newline character.  */
-	  if (fmt == startp)
-	    {
-	      iov[niov].iov_base = (char *) startp;
-	      iov[niov++].iov_len = 1;
-	    }
-	  else
-	    /* No, just add it to the rest of the string.  */
-	    ++iov[niov - 1].iov_len;
-
-	  /* Next line, print a tag again.  */
-	  tag_p = 1;
-	  ++fmt;
-	}
-    }
-
-  /* Finally write the result.  */
-  writev (fd, iov, niov);
-}
-
-
-/* Write to debug file.  */
-void
-_dl_debug_printf (const char *fmt, ...)
-{
-  va_list arg;
-
-  va_start (arg, fmt);
-  _dl_debug_vdprintf (_dl_debug_fd, 1, fmt, arg);
-  va_end (arg);
-}
-
-
-/* Write to debug file but don't start with a tag.  */
-void
-_dl_debug_printf_c (const char *fmt, ...)
-{
-  va_list arg;
-
-  va_start (arg, fmt);
-  _dl_debug_vdprintf (_dl_debug_fd, -1, fmt, arg);
-  va_end (arg);
-}
-
-
-/* Write the given file descriptor.  */
-void
-_dl_dprintf (int fd, const char *fmt, ...)
-{
-  va_list arg;
-
-  va_start (arg, fmt);
-  _dl_debug_vdprintf (fd, 0, fmt, arg);
-  va_end (arg);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-object.c b/newlib/libc/sys/linux/dl/dl-object.c
deleted file mode 100644
index 1e2049e25..000000000
--- a/newlib/libc/sys/linux/dl/dl-object.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Storage management for the chain of loaded shared objects.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-
-#include <assert.h>
-
-
-/* Allocate a `struct link_map' for a new object being loaded,
-   and enter it into the _dl_loaded list.  */
-
-struct link_map *
-internal_function
-_dl_new_object (char *realname, const char *libname, int type,
-		struct link_map *loader)
-{
-  struct link_map *l;
-  int idx;
-  size_t libname_len = strlen (libname) + 1;
-  struct link_map *new;
-  struct libname_list *newname;
-
-  new = (struct link_map *) calloc (sizeof (*new) + sizeof (*newname)
-				    + libname_len, 1);
-  if (new == NULL)
-    return NULL;
-
-  new->l_libname = newname = (struct libname_list *) (new + 1);
-  newname->name = (char *) memcpy (newname + 1, libname, libname_len);
-  /* newname->next = NULL;	We use calloc therefore not necessary.  */
-  newname->dont_free = 1;
-
-  new->l_name = realname;
-  new->l_type = type;
-  new->l_loader = loader;
-  /* new->l_global = 0;	We use calloc therefore not necessary.  */
-
-  /* Use the 'l_scope_mem' array by default for the the 'l_scope'
-     information.  If we need more entries we will allocate a large
-     array dynamically.  */
-  new->l_scope = new->l_scope_mem;
-  new->l_scope_max = sizeof (new->l_scope_mem) / sizeof (new->l_scope_mem[0]);
-
-  /* Counter for the scopes we have to handle.  */
-  idx = 0;
-
-  if (_dl_loaded != NULL)
-    {
-      l = _dl_loaded;
-      while (l->l_next != NULL)
-	l = l->l_next;
-      new->l_prev = l;
-      /* new->l_next = NULL;	Would be necessary but we use calloc.  */
-      l->l_next = new;
-
-      /* Add the global scope.  */
-      new->l_scope[idx++] = &_dl_loaded->l_searchlist;
-    }
-  else
-    _dl_loaded = new;
-  ++_dl_nloaded;
-
-  /* If we have no loader the new object acts as it.  */
-  if (loader == NULL)
-    loader = new;
-  else
-    /* Determine the local scope.  */
-    while (loader->l_loader != NULL)
-      loader = loader->l_loader;
-
-  /* Insert the scope if it isn't the global scope we already added.  */
-  if (idx == 0 || &loader->l_searchlist != new->l_scope[0])
-    new->l_scope[idx] = &loader->l_searchlist;
-
-  new->l_local_scope[0] = &new->l_searchlist;
-
-  /* Don't try to find the origin for the main map which has the name "".  */
-  if (realname[0] != '\0')
-    {
-      size_t realname_len = strlen (realname) + 1;
-      char *origin;
-      char *cp;
-
-      if (realname[0] == '/')
-	{
-	  /* It is an absolute path.  Use it.  But we have to make a
-	     copy since we strip out the trailing slash.  */
-	  cp = origin = (char *) malloc (realname_len);
-	  if (origin == NULL)
-	    {
-	      origin = (char *) -1;
-	      goto out;
-	    }
-	}
-      else
-	{
-	  size_t len = realname_len;
-	  char *result = NULL;
-
-	  /* Get the current directory name.  */
-	  origin = NULL;
-	  do
-	    {
-	      len += 128;
-	      origin = (char *) realloc (origin, len);
-	    }
-	  while (origin != NULL
-		 && (result = getcwd (origin, len - realname_len)) == NULL
-		 && errno == ERANGE);
-
-	  if (result == NULL)
-	    {
-	      /* We were not able to determine the current directory.
-	         Note that free(origin) is OK if origin == NULL.  */
-	      free (origin);
-	      origin = (char *) -1;
-	      goto out;
-	    }
-
-	  /* Find the end of the path and see whether we have to add
-	     a slash.  */
-	  cp = memchr (origin, '\0', strlen(origin));
-	  if (cp[-1] != '/')
-	    *cp++ = '/';
-	}
-
-      /* Add the real file name.  */
-      memcpy (cp, realname, realname_len);
-
-      /* Now remove the filename and the slash.  Leave the slash if it
-	 the name is something like "/foo".  */
-      cp = strrchr (origin, '/');
-      if (cp == origin)
-	origin[1] = '\0';
-      else
-	*cp = '\0';
-
-    out:
-      new->l_origin = origin;
-    }
-
-  return new;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-open.c b/newlib/libc/sys/linux/dl/dl-open.c
deleted file mode 100644
index 195361427..000000000
--- a/newlib/libc/sys/linux/dl/dl-open.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/* Load a shared object at runtime, relocate it, and run its initializer.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <dlfcn.h>
-#include <errno.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/mman.h>		/* Check whether MAP_COPY is defined.  */
-#include <sys/param.h>
-#include <ldsodefs.h>
-#include <bp-sym.h>
-
-#include <dl-dst.h>
-#include <machine/weakalias.h>
-
-
-extern ElfW(Addr) _dl_sysdep_start (void **start_argptr,
-				    void (*dl_main) (const ElfW(Phdr) *phdr,
-						     ElfW(Word) phnum,
-						     ElfW(Addr) *user_entry));
-weak_extern (BP_SYM (_dl_sysdep_start))
-
-/* This function is used to unload the cache file if necessary.  */
-extern void _dl_unload_cache (void);
-
-int __libc_argc = 0;
-char **__libc_argv = NULL;
-
-extern char **environ;
-
-extern int _dl_lazy;			/* Do we do lazy relocations?  */
-
-/* Undefine the following for debugging.  */
-/* #define SCOPE_DEBUG 1 */
-#ifdef SCOPE_DEBUG
-static void show_scope (struct link_map *new);
-#endif
-
-extern size_t _dl_platformlen;
-
-/* We must be carefull not to leave us in an inconsistent state.  Thus we
-   catch any error and re-raise it after cleaning up.  */
-
-struct dl_open_args
-{
-  const char *file;
-  int mode;
-  const void *caller;
-  struct link_map *map;
-};
-
-
-static int
-add_to_global (struct link_map *new)
-{
-  struct link_map **new_global;
-  unsigned int to_add = 0;
-  unsigned int cnt;
-
-  /* Count the objects we have to put in the global scope.  */
-  for (cnt = 0; cnt < new->l_searchlist.r_nlist; ++cnt)
-    if (new->l_searchlist.r_list[cnt]->l_global == 0)
-      ++to_add;
-
-  /* The symbols of the new objects and its dependencies are to be
-     introduced into the global scope that will be used to resolve
-     references from other dynamically-loaded objects.
-
-     The global scope is the searchlist in the main link map.  We
-     extend this list if necessary.  There is one problem though:
-     since this structure was allocated very early (before the libc
-     is loaded) the memory it uses is allocated by the malloc()-stub
-     in the ld.so.  When we come here these functions are not used
-     anymore.  Instead the malloc() implementation of the libc is
-     used.  But this means the block from the main map cannot be used
-     in an realloc() call.  Therefore we allocate a completely new
-     array the first time we have to add something to the locale scope.  */
-
-  if (_dl_global_scope_alloc == 0)
-    {
-      /* This is the first dynamic object given global scope.  */
-      _dl_global_scope_alloc = _dl_main_searchlist->r_nlist + to_add + 8;
-      new_global = (struct link_map **)
-	malloc (_dl_global_scope_alloc * sizeof (struct link_map *));
-      if (new_global == NULL)
-	{
-	  _dl_global_scope_alloc = 0;
-	nomem:
-	  _dl_signal_error (ENOMEM, new->l_libname->name, NULL,
-			    N_("cannot extend global scope"));
-	  return 1;
-	}
-
-      /* Copy over the old entries.  */
-      memcpy (new_global, _dl_main_searchlist->r_list,
-	      (_dl_main_searchlist->r_nlist * sizeof (struct link_map *)));
-
-      _dl_main_searchlist->r_list = new_global;
-    }
-  else if (_dl_main_searchlist->r_nlist + to_add > _dl_global_scope_alloc)
-    {
-      /* We have to extend the existing array of link maps in the
-	 main map.  */
-      new_global = (struct link_map **)
-	realloc (_dl_main_searchlist->r_list,
-		 ((_dl_global_scope_alloc + to_add + 8)
-		  * sizeof (struct link_map *)));
-      if (new_global == NULL)
-	goto nomem;
-
-      _dl_global_scope_alloc += to_add + 8;
-      _dl_main_searchlist->r_list = new_global;
-    }
-
-  /* Now add the new entries.  */
-  for (cnt = 0; cnt < new->l_searchlist.r_nlist; ++cnt)
-    {
-      struct link_map *map = new->l_searchlist.r_list[cnt];
-
-      if (map->l_global == 0)
-	{
-	  map->l_global = 1;
-	  _dl_main_searchlist->r_list[_dl_main_searchlist->r_nlist] = map;
-	  ++_dl_main_searchlist->r_nlist;
-	}
-    }
-
-  return 0;
-}
-
-
-static void
-dl_open_worker (void *a)
-{
-  struct dl_open_args *args = a;
-  const char *file = args->file;
-  int mode = args->mode;
-  struct link_map *new, *l;
-  const char *dst;
-  int lazy;
-  unsigned int i;
-
-  /* Maybe we have to expand a DST.  */
-  dst = strchr (file, '$');
-  if (dst != NULL)
-    {
-      const void *caller = args->caller;
-      size_t len = strlen (file);
-      size_t required;
-      struct link_map *call_map;
-      char *new_file;
-
-      /* We have to find out from which object the caller is calling.  */
-      call_map = NULL;
-      for (l = _dl_loaded; l; l = l->l_next)
-	if (caller >= (const void *) l->l_map_start
-	    && caller < (const void *) l->l_map_end)
-	  {
-	    /* There must be exactly one DSO for the range of the virtual
-	       memory.  Otherwise something is really broken.  */
-	    call_map = l;
-	    break;
-	  }
-
-      if (call_map == NULL)
-	/* In this case we assume this is the main application.  */
-	call_map = _dl_loaded;
-
-      /* Determine how much space we need.  We have to allocate the
-	 memory locally.  */
-      required = DL_DST_REQUIRED (call_map, file, len, _dl_dst_count (dst, 0));
-
-      /* Get space for the new file name.  */
-      new_file = (char *) alloca (required + 1);
-
-      /* Generate the new file name.  */
-      DL_DST_SUBSTITUTE (call_map, file, new_file, 0);
-
-      /* If the substitution failed don't try to load.  */
-      if (*new_file == '\0')
-	_dl_signal_error (0, "dlopen", NULL,
-			  N_("empty dynamic string token substitution"));
-
-      /* Now we have a new file name.  */
-      file = new_file;
-    }
-
-  /* Load the named object.  */
-  args->map = new = _dl_map_object (NULL, file, 0, lt_loaded, 0,
-				    mode);
-
-  /* If the pointer returned is NULL this means the RTLD_NOLOAD flag is
-     set and the object is not already loaded.  */
-  if (new == NULL)
-    {
-      assert (mode & RTLD_NOLOAD);
-      return;
-    }
-
-  /* It was already open.  */
-  if (new->l_searchlist.r_list != NULL)
-    {
-      /* Let the user know about the opencount.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-	_dl_debug_printf ("opening file=%s; opencount == %u\n\n",
-			  new->l_name, new->l_opencount);
-
-      /* If the user requested the object to be in the global namespace
-	 but it is not so far, add it now.  */
-      if ((mode & RTLD_GLOBAL) && new->l_global == 0)
-	(void) add_to_global (new);
-
-      /* Increment just the reference counter of the object.  */
-      ++new->l_opencount;
-
-      return;
-    }
-
-  /* Load that object's dependencies.  */
-  _dl_map_object_deps (new, NULL, 0, 0);
-
-  /* So far, so good.  Now check the versions.  */
-  for (i = 0; i < new->l_searchlist.r_nlist; ++i)
-    if (new->l_searchlist.r_list[i]->l_versions == NULL)
-      (void) _dl_check_map_versions (new->l_searchlist.r_list[i], 0, 0);
-
-#ifdef SCOPE_DEBUG
-  show_scope (new);
-#endif
-
-  /* Only do lazy relocation if `LD_BIND_NOW' is not set.  */
-  lazy = (mode & RTLD_BINDING_MASK) == RTLD_LAZY && _dl_lazy;
-
-  /* Relocate the objects loaded.  We do this in reverse order so that copy
-     relocs of earlier objects overwrite the data written by later objects.  */
-
-  l = new;
-  while (l->l_next)
-    l = l->l_next;
-  while (1)
-    {
-      if (! l->l_relocated)
-	{
-#if 0
-#ifdef SHARED
-	  if (_dl_profile != NULL)
-	    {
-	      /* If this here is the shared object which we want to profile
-		 make sure the profile is started.  We can find out whether
-	         this is necessary or not by observing the `_dl_profile_map'
-	         variable.  If was NULL but is not NULL afterwars we must
-		 start the profiling.  */
-	      struct link_map *old_profile_map = _dl_profile_map;
-
-	      _dl_relocate_object (l, l->l_scope, 1, 1);
-
-	      if (old_profile_map == NULL && _dl_profile_map != NULL)
-		/* We must prepare the profiling.  */
-		_dl_start_profile (_dl_profile_map, _dl_profile_output);
-	    }
-	  else
-#endif
-#endif
-	    _dl_relocate_object (l, l->l_scope, lazy, 0);
-	}
-
-      if (l == new)
-	break;
-      l = l->l_prev;
-    }
-
-  /* Increment the open count for all dependencies.  If the file is
-     not loaded as a dependency here add the search list of the newly
-     loaded object to the scope.  */
-  for (i = 0; i < new->l_searchlist.r_nlist; ++i)
-    if (++new->l_searchlist.r_list[i]->l_opencount > 1
-	&& new->l_searchlist.r_list[i]->l_type == lt_loaded)
-      {
-	struct link_map *imap = new->l_searchlist.r_list[i];
-	struct r_scope_elem **runp = imap->l_scope;
-	size_t cnt = 0;
-
-	while (*runp != NULL)
-	  {
-	    /* This can happen if imap was just loaded, but during
-	       relocation had l_opencount bumped because of relocation
-	       dependency.  Avoid duplicates in l_scope.  */
-	    if (__builtin_expect (*runp == &new->l_searchlist, 0))
-	      break;
-
-	    ++cnt;
-	    ++runp;
-	  }
-
-	if (*runp != NULL)
-	  /* Avoid duplicates.  */
-	  continue;
-
-	if (__builtin_expect (cnt + 1 >= imap->l_scope_max, 0))
-	  {
-	    /* The 'r_scope' array is too small.  Allocate a new one
-	       dynamically.  */
-	    struct r_scope_elem **newp;
-	    size_t new_size = imap->l_scope_max * 2;
-
-	    if (imap->l_scope == imap->l_scope_mem)
-	      {
-		newp = (struct r_scope_elem **)
-		  malloc (new_size * sizeof (struct r_scope_elem *));
-		if (newp == NULL)
-		  _dl_signal_error (ENOMEM, "dlopen", NULL,
-				    N_("cannot create scope list"));
-		imap->l_scope = memcpy (newp, imap->l_scope,
-					cnt * sizeof (imap->l_scope[0]));
-	      }
-	    else
-	      {
-		newp = (struct r_scope_elem **)
-		  realloc (imap->l_scope,
-			   new_size * sizeof (struct r_scope_elem *));
-		if (newp == NULL)
-		  _dl_signal_error (ENOMEM, "dlopen", NULL,
-				    N_("cannot create scope list"));
-		imap->l_scope = newp;
-	      }
-
-	    imap->l_scope_max = new_size;
-	  }
-
-	imap->l_scope[cnt++] = &new->l_searchlist;
-	imap->l_scope[cnt] = NULL;
-      }
-
-  /* Run the initializer functions of new objects.  */
-  _dl_init (new, __libc_argc, __libc_argv, environ);
-
-  /* Now we can make the new map available in the global scope.  */
-  if (mode & RTLD_GLOBAL)
-    /* Move the object in the global namespace.  */
-    if (add_to_global (new) != 0)
-      /* It failed.  */
-      return;
-
-  /* Mark the object as not deletable if the RTLD_NODELETE flags was
-     passed.  */
-  if (__builtin_expect (mode & RTLD_NODELETE, 0))
-    new->l_flags_1 |= DF_1_NODELETE;
-
-  /* Let the user know about the opencount.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_FILES, 0))
-    _dl_debug_printf ("opening file=%s; opencount == %u\n\n",
-		      new->l_name, new->l_opencount);
-}
-
-
-void *
-internal_function
-_dl_open (const char *file, int mode, const void *caller)
-{
-  struct dl_open_args args;
-  const char *objname;
-  const char *errstring;
-  int errcode;
-
-  if ((mode & RTLD_BINDING_MASK) == 0)
-    /* One of the flags must be set.  */
-    _dl_signal_error (EINVAL, file, NULL, N_("invalid mode for dlopen()"));
-
-  /* Make sure we are alone.  */
-#ifdef HAVE_DD_LOCK
-    __lock_acquire_recursive(_dl_load_lock);
-#endif
-
-  args.file = file;
-  args.mode = mode;
-  args.caller = caller;
-  args.map = NULL;
-  errcode = _dl_catch_error (&objname, &errstring, dl_open_worker, &args);
-
-#ifndef MAP_COPY
-  /* We must munmap() the cache file.  */
-  _dl_unload_cache ();
-#endif
-
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-    __lock_release_recursive(_dl_load_lock);
-#endif
-
-
-  if (errstring)
-    {
-      /* Some error occurred during loading.  */
-      char *local_errstring;
-      size_t len_errstring;
-
-      /* Remove the object from memory.  It may be in an inconsistent
-	 state if relocation failed, for example.  */
-      if (args.map)
-	{
-	  unsigned int i;
-
-	  /* Increment open counters for all objects since this has
-	     not happened yet.  */
-	  for (i = 0; i < args.map->l_searchlist.r_nlist; ++i)
-	    ++args.map->l_searchlist.r_list[i]->l_opencount;
-
-	  _dl_close (args.map);
-	}
-
-      /* Make a local copy of the error string so that we can release the
-	 memory allocated for it.  */
-      len_errstring = strlen (errstring) + 1;
-      if (objname == errstring + len_errstring)
-	{
-	  size_t total_len = len_errstring + strlen (objname) + 1;
-	  local_errstring = alloca (total_len);
-	  memcpy (local_errstring, errstring, total_len);
-	  objname = local_errstring + len_errstring;
-	}
-      else
-	{
-	  local_errstring = alloca (len_errstring);
-	  memcpy (local_errstring, errstring, len_errstring);
-	}
-
-      if (errstring != _dl_out_of_memory)
-	free ((char *) errstring);
-
-      /* Reraise the error.  */
-      _dl_signal_error (errcode, objname, NULL, local_errstring);
-    }
-
-#ifndef SHARED
-  DL_STATIC_INIT (args.map);
-#endif
-
-  return args.map;
-}
-
-
-#ifdef SCOPE_DEBUG
-#include <unistd.h>
-
-static void
-show_scope (struct link_map *new)
-{
-  int scope_cnt;
-
-  for (scope_cnt = 0; new->l_scope[scope_cnt] != NULL; ++scope_cnt)
-    {
-      char numbuf[2];
-      unsigned int cnt;
-
-      numbuf[0] = '0' + scope_cnt;
-      numbuf[1] = '\0';
-      _dl_printf ("scope %s:", numbuf);
-
-      for (cnt = 0; cnt < new->l_scope[scope_cnt]->r_nlist; ++cnt)
-	if (*new->l_scope[scope_cnt]->r_list[cnt]->l_name)
-	  _dl_printf (" %s", new->l_scope[scope_cnt]->r_list[cnt]->l_name);
-	else
-	  _dl_printf (" <main>");
-
-      _dl_printf ("\n");
-    }
-}
-#endif
diff --git a/newlib/libc/sys/linux/dl/dl-osinfo.h b/newlib/libc/sys/linux/dl/dl-osinfo.h
deleted file mode 100644
index 4976b3126..000000000
--- a/newlib/libc/sys/linux/dl/dl-osinfo.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* Operating system specific code  for generic dynamic loader functions.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <string.h>
-#include <sys/sysctl.h>
-#include <sys/utsname.h>
-#include "kernel-features.h"
-
-#ifndef MIN
-# define MIN(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifdef SHARED
-/* This is the function used in the dynamic linker to print the fatal error
-   message.  */
-static inline void
-__attribute__ ((__noreturn__))
-dl_fatal (const char *str)
-{
-  _dl_dprintf (2, str);
-  _exit (1);
-}
-#endif
-
-
-#define DL_SYSDEP_OSCHECK(FATAL) \
-  do {									      \
-    /* Test whether the kernel is new enough.  This test is only	      \
-       performed if the library is not compiled to run on all		      \
-       kernels.  */							      \
-    if (__LINUX_KERNEL_VERSION > 0)					      \
-      {									      \
-	char bufmem[64];						      \
-	char *buf = bufmem;						      \
-	unsigned int version;						      \
-	int parts;							      \
-	char *cp;							      \
-	struct utsname uts;						      \
-									      \
-	/* Try the uname syscall */					      \
-	if (__uname (&uts))					      	      \
-	  {							      	      \
-	    /* This was not successful.  Now try reading the /proc	      \
-	       filesystem.  */						      \
-	    ssize_t reslen;						      \
-	    int fd = __open ("/proc/sys/kernel/osrelease", O_RDONLY);	      \
-	    if (fd == -1						      \
-		|| (reslen = __read (fd, bufmem, sizeof (bufmem))) <= 0)      \
-  	      /* This also didn't work.  We give up since we cannot	      \
-		 make sure the library can actually work.  */		      \
-	      FATAL ("FATAL: cannot determine library version\n");	      \
-	    __close (fd);						      \
-	    buf[MIN (reslen, (ssize_t) sizeof (bufmem) - 1)] = '\0';	      \
-	  }								      \
-	else								      \
-          buf = uts.release;						      \
-									      \
-	/* Now convert it into a number.  The string consists of at most      \
-	   three parts.  */						      \
-	version = 0;							      \
-	parts = 0;							      \
-	cp = buf;							      \
-	while ((*cp >= '0') && (*cp <= '9'))				      \
-	  {								      \
-	    unsigned int here = *cp++ - '0';				      \
-									      \
-	    while ((*cp >= '0') && (*cp <= '9'))			      \
-	      {								      \
-		here *= 10;						      \
-		here += *cp++ - '0';					      \
-	      }								      \
-									      \
-	    ++parts;							      \
-	    version <<= 8;						      \
-	    version |= here;						      \
-									      \
-	    if (*cp++ != '.')						      \
-	      /* Another part following?  */				      \
-	      break;							      \
-	  }								      \
-									      \
-	if (parts < 3)							      \
-	  version <<= 8 * (3 - parts);					      \
-									      \
-	/* Now we can test with the required version.  */		      \
-	if (version < __LINUX_KERNEL_VERSION)				      \
-	  /* Not sufficent.  */						      \
-	  FATAL ("FATAL: kernel too old\n");				      \
-									      \
-	_dl_osversion = version;					      \
-      }									      \
-  } while (0)
diff --git a/newlib/libc/sys/linux/dl/dl-profile.c b/newlib/libc/sys/linux/dl/dl-profile.c
deleted file mode 100644
index 52c533f5f..000000000
--- a/newlib/libc/sys/linux/dl/dl-profile.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/* Profiling of shared libraries.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-   Based on the BSD mcount implementation.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include <sys/gmon.h>
-#include <sys/gmon_out.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <atomicity.h>
-#include <config.h>
-
-/* The LD_PROFILE feature has to be implemented different to the
-   normal profiling using the gmon/ functions.  The problem is that an
-   arbitrary amount of processes simulataneously can be run using
-   profiling and all write the results in the same file.  To provide
-   this mechanism one could implement a complicated mechanism to merge
-   the content of two profiling runs or one could extend the file
-   format to allow more than one data set.  For the second solution we
-   would have the problem that the file can grow in size beyond any
-   limit and both solutions have the problem that the concurrency of
-   writing the results is a big problem.
-
-   Another much simpler method is to use mmap to map the same file in
-   all using programs and modify the data in the mmap'ed area and so
-   also automatically on the disk.  Using the MAP_SHARED option of
-   mmap(2) this can be done without big problems in more than one
-   file.
-
-   This approach is very different from the normal profiling.  We have
-   to use the profiling data in exactly the way they are expected to
-   be written to disk.  But the normal format used by gprof is not usable
-   to do this.  It is optimized for size.  It writes the tags as single
-   bytes but this means that the following 32/64 bit values are
-   unaligned.
-
-   Therefore we use a new format.  This will look like this
-
-					0  1  2  3	<- byte is 32 bit word
-	0000				g  m  o  n
-	0004				*version*	<- GMON_SHOBJ_VERSION
-	0008				00 00 00 00
-	000c				00 00 00 00
-	0010				00 00 00 00
-
-	0014				*tag*		<- GMON_TAG_TIME_HIST
-	0018				?? ?? ?? ??
-					?? ?? ?? ??	<- 32/64 bit LowPC
-	0018+A				?? ?? ?? ??
-					?? ?? ?? ??	<- 32/64 bit HighPC
-	0018+2*A			*histsize*
-	001c+2*A			*profrate*
-	0020+2*A			s  e  c  o
-	0024+2*A			n  d  s  \0
-	0028+2*A			\0 \0 \0 \0
-	002c+2*A			\0 \0 \0
-	002f+2*A			s
-
-	0030+2*A			?? ?? ?? ??	<- Count data
-	...				...
-	0030+2*A+K			?? ?? ?? ??
-
-	0030+2*A+K			*tag*		<- GMON_TAG_CG_ARC
-	0034+2*A+K			*lastused*
-	0038+2*A+K			?? ?? ?? ??
-					?? ?? ?? ??	<- FromPC#1
-	0038+3*A+K			?? ?? ?? ??
-					?? ?? ?? ??	<- ToPC#1
-	0038+4*A+K			?? ?? ?? ??	<- Count#1
-	...				...		   ...
-	0038+(2*(CN-1)+2)*A+(CN-1)*4+K	?? ?? ?? ??
-					?? ?? ?? ??	<- FromPC#CGN
-	0038+(2*(CN-1)+3)*A+(CN-1)*4+K	?? ?? ?? ??
-					?? ?? ?? ??	<- ToPC#CGN
-	0038+(2*CN+2)*A+(CN-1)*4+K	?? ?? ?? ??	<- Count#CGN
-
-   We put (for now?) no basic block information in the file since this would
-   introduce rase conditions among all the processes who want to write them.
-
-   `K' is the number of count entries which is computed as
-
- 		textsize / HISTFRACTION
-
-   `CG' in the above table is the number of call graph arcs.  Normally,
-   the table is sparse and the profiling code writes out only the those
-   entries which are really used in the program run.  But since we must
-   not extend this table (the profiling file) we'll keep them all here.
-   So CN can be executed in advance as
-
-		MINARCS <= textsize*(ARCDENSITY/100) <= MAXARCS
-
-   Now the remaining question is: how to build the data structures we can
-   work with from this data.  We need the from set and must associate the
-   froms with all the associated tos.  We will do this by constructing this
-   data structures at the program start.  To do this we'll simply visit all
-   entries in the call graph table and add it to the appropriate list.  */
-
-extern int __profile_frequency (void);
-
-/* We define a special type to address the elements of the arc table.
-   This is basically the `gmon_cg_arc_record' format but it includes
-   the room for the tag and it uses real types.  */
-struct here_cg_arc_record
-  {
-    uintptr_t from_pc;
-    uintptr_t self_pc;
-    uint32_t count;
-  } __attribute__ ((packed));
-
-static struct here_cg_arc_record *data;
-
-/* Nonzero if profiling is under way.  */
-static int running;
-
-/* This is the number of entry which have been incorporated in the toset.  */
-static uint32_t narcs;
-/* This is a pointer to the object representing the number of entries
-   currently in the mmaped file.  At no point of time this has to be the
-   same as NARCS.  If it is equal all entries from the file are in our
-   lists.  */
-static volatile uint32_t *narcsp;
-
-static volatile uint16_t *kcount;
-static size_t kcountsize;
-
-struct here_fromstruct
-  {
-    struct here_cg_arc_record volatile *here;
-    uint16_t link;
-  };
-
-static volatile uint16_t *tos;
-
-static struct here_fromstruct *froms;
-static uint32_t fromlimit;
-static volatile uint32_t fromidx;
-
-static uintptr_t lowpc;
-static size_t textsize;
-static unsigned int hashfraction;
-static unsigned int log_hashfraction;
-
-
-
-/* Set up profiling data to profile object desribed by MAP.  The output
-   file is found (or created) in OUTPUT_DIR.  */
-void
-internal_function
-_dl_start_profile (struct link_map *map, const char *output_dir)
-{
-  char *filename;
-  int fd;
-  struct stat64 st;
-  const ElfW(Phdr) *ph;
-  ElfW(Addr) mapstart = ~((ElfW(Addr)) 0);
-  ElfW(Addr) mapend = 0;
-  struct gmon_hdr gmon_hdr;
-  struct gmon_hist_hdr hist_hdr;
-  char *hist, *cp, *tmp;
-  size_t idx;
-  size_t tossize;
-  size_t fromssize;
-  uintptr_t highpc;
-  struct gmon_hdr *addr = NULL;
-  off_t expected_size;
-  /* See profil(2) where this is described.  */
-  int s_scale;
-#define SCALE_1_TO_1	0x10000L
-
-  /* Compute the size of the sections which contain program code.  */
-  for (ph = map->l_phdr; ph < &map->l_phdr[map->l_phnum]; ++ph)
-    if (ph->p_type == PT_LOAD && (ph->p_flags & PF_X))
-      {
-	ElfW(Addr) start = (ph->p_vaddr & ~(_dl_pagesize - 1));
-	ElfW(Addr) end = ((ph->p_vaddr + ph->p_memsz + _dl_pagesize - 1)
-			  & ~(_dl_pagesize - 1));
-
-	if (start < mapstart)
-	  mapstart = start;
-	if (end > mapend)
-	  mapend = end;
-      }
-
-  /* Now we can compute the size of the profiling data.  This is done
-     with the same formulars as in `monstartup' (see gmon.c).  */
-  running = 0;
-  lowpc = ROUNDDOWN (mapstart + map->l_addr,
-		     HISTFRACTION * sizeof (HISTCOUNTER));
-  highpc = ROUNDUP (mapend + map->l_addr,
-		    HISTFRACTION * sizeof (HISTCOUNTER));
-  textsize = highpc - lowpc;
-  kcountsize = textsize / HISTFRACTION;
-  hashfraction = HASHFRACTION;
-  if ((HASHFRACTION & (HASHFRACTION - 1)) == 0)
-    /* If HASHFRACTION is a power of two, mcount can use shifting
-       instead of integer division.  Precompute shift amount.  */
-    log_hashfraction = ffs (hashfraction * sizeof (*froms)) - 1;
-  else
-    log_hashfraction = -1;
-  tossize = textsize / HASHFRACTION;
-  fromlimit = textsize * ARCDENSITY / 100;
-  if (fromlimit < MINARCS)
-    fromlimit = MINARCS;
-  if (fromlimit > MAXARCS)
-    fromlimit = MAXARCS;
-  fromssize = fromlimit * sizeof (struct here_fromstruct);
-
-  expected_size = (sizeof (struct gmon_hdr)
-		   + 4 + sizeof (struct gmon_hist_hdr) + kcountsize
-		   + 4 + 4 + fromssize * sizeof (struct here_cg_arc_record));
-
-  /* Create the gmon_hdr we expect or write.  */
-  memset (&gmon_hdr, '\0', sizeof (struct gmon_hdr));
-  memcpy (&gmon_hdr.cookie[0], GMON_MAGIC, sizeof (gmon_hdr.cookie));
-  *(int32_t *) gmon_hdr.version = GMON_SHOBJ_VERSION;
-
-  /* Create the hist_hdr we expect or write.  */
-  *(char **) hist_hdr.low_pc = (char *) mapstart;
-  *(char **) hist_hdr.high_pc = (char *) mapend;
-  *(int32_t *) hist_hdr.hist_size = kcountsize / sizeof (HISTCOUNTER);
-  *(int32_t *) hist_hdr.prof_rate = __profile_frequency ();
-  strncpy (hist_hdr.dimen, "seconds", sizeof (hist_hdr.dimen));
-  hist_hdr.dimen_abbrev = 's';
-
-  /* First determine the output name.  We write in the directory
-     OUTPUT_DIR and the name is composed from the shared objects
-     soname (or the file name) and the ending ".profile".  */
-  filename = (char *) alloca (strlen (output_dir) + 1 + strlen (_dl_profile)
-			      + sizeof ".profile");
-  cp = strcpy (filename, output_dir);
-  cp += strlen (output_dir);
-  *cp++ = '/';
-  tmp = strcpy (cp, _dl_profile);
-  tmp += strlen (_dl_profile);
-  strcpy (tmp, ".profile");
-
-#ifdef O_NOFOLLOW
-# define EXTRA_FLAGS | O_NOFOLLOW
-#else
-# define EXTRA_FLAGS
-#endif
-  fd = __open (filename, O_RDWR | O_CREAT EXTRA_FLAGS);
-  if (fd == -1)
-    {
-      /* We cannot write the profiling data so don't do anything.  */
-      char buf[400];
-      _dl_error_printf ("%s: cannot open file: %s\n", filename,
-			__strerror_r (errno, buf, sizeof buf));
-      return;
-    }
-
-  if (fstat64 (fd, &st) < 0 || !S_ISREG (st.st_mode))
-    {
-      /* Not stat'able or not a regular file => don't use it.  */
-      char buf[400];
-      int errnum = errno;
-      __close (fd);
-      _dl_error_printf ("%s: cannot stat file: %s\n", filename,
-			__strerror_r (errnum, buf, sizeof buf));
-      return;
-    }
-
-  /* Test the size.  If it does not match what we expect from the size
-     values in the map MAP we don't use it and warn the user.  */
-  if (st.st_size == 0)
-    {
-      /* We have to create the file.  */
-      char buf[_dl_pagesize];
-
-      memset (buf, '\0', _dl_pagesize);
-
-      if (__lseek (fd, expected_size & ~(_dl_pagesize - 1), SEEK_SET) == -1)
-	{
-	  char buf[400];
-	  int errnum;
-	cannot_create:
-	  errnum = errno;
-	  __close (fd);
-	  _dl_error_printf ("%s: cannot create file: %s\n", filename,
-			    __strerror_r (errnum, buf, sizeof buf));
-	  return;
-	}
-
-      if (TEMP_FAILURE_RETRY (__libc_write (fd, buf, (expected_size
-						      & (_dl_pagesize - 1))))
-	  < 0)
-	goto cannot_create;
-    }
-  else if (st.st_size != expected_size)
-    {
-      __close (fd);
-    wrong_format:
-
-      if (addr != NULL)
-	__munmap ((void *) addr, expected_size);
-
-      _dl_error_printf ("%s: file is no correct profile data file for `%s'\n",
-			filename, _dl_profile);
-      return;
-    }
-
-  addr = (struct gmon_hdr *) __mmap (NULL, expected_size, PROT_READ|PROT_WRITE,
-				     MAP_SHARED|MAP_FILE, fd, 0);
-  if (addr == (struct gmon_hdr *) MAP_FAILED)
-    {
-      char buf[400];
-      int errnum = errno;
-      __close (fd);
-      _dl_error_printf ("%s: cannot map file: %s\n", filename,
-			__strerror_r (errnum, buf, sizeof buf));
-      return;
-    }
-
-  /* We don't need the file desriptor anymore.  */
-  __close (fd);
-
-  /* Pointer to data after the header.  */
-  hist = (char *) (addr + 1);
-  kcount = (uint16_t *) ((char *) hist + sizeof (uint32_t)
-			 + sizeof (struct gmon_hist_hdr));
-
-  /* Compute pointer to array of the arc information.  */
-  narcsp = (uint32_t *) ((char *) kcount + kcountsize + sizeof (uint32_t));
-  data = (struct here_cg_arc_record *) ((char *) narcsp + sizeof (uint32_t));
-
-  if (st.st_size == 0)
-    {
-      /* Create the signature.  */
-      memcpy (addr, &gmon_hdr, sizeof (struct gmon_hdr));
-
-      *(uint32_t *) hist = GMON_TAG_TIME_HIST;
-      memcpy (hist + sizeof (uint32_t), &hist_hdr,
-	      sizeof (struct gmon_hist_hdr));
-
-      narcsp[-1] = GMON_TAG_CG_ARC;
-    }
-  else
-    {
-      /* Test the signature in the file.  */
-      if (memcmp (addr, &gmon_hdr, sizeof (struct gmon_hdr)) != 0
-	  || *(uint32_t *) hist != GMON_TAG_TIME_HIST
-	  || memcmp (hist + sizeof (uint32_t), &hist_hdr,
-		     sizeof (struct gmon_hist_hdr)) != 0
-	  || narcsp[-1] != GMON_TAG_CG_ARC)
-	goto wrong_format;
-    }
-
-  /* Allocate memory for the froms data and the pointer to the tos records.  */
-  tos = (uint16_t *) calloc (tossize + fromssize, 1);
-  if (tos == NULL)
-    {
-      __munmap ((void *) addr, expected_size);
-      _dl_fatal_printf ("Out of memory while initializing profiler\n");
-      /* NOTREACHED */
-    }
-
-  froms = (struct here_fromstruct *) ((char *) tos + tossize);
-  fromidx = 0;
-
-  /* Now we have to process all the arc count entries.  BTW: it is
-     not critical whether the *NARCSP value changes meanwhile.  Before
-     we enter a new entry in to toset we will check that everything is
-     available in TOS.  This happens in _dl_mcount.
-
-     Loading the entries in reverse order should help to get the most
-     frequently used entries at the front of the list.  */
-  for (idx = narcs = MIN (*narcsp, fromlimit); idx > 0; )
-    {
-      size_t to_index;
-      size_t newfromidx;
-      --idx;
-      to_index = (data[idx].self_pc / (hashfraction * sizeof (*tos)));
-      newfromidx = fromidx++;
-      froms[newfromidx].here = &data[idx];
-      froms[newfromidx].link = tos[to_index];
-      tos[to_index] = newfromidx;
-    }
-
-  /* Setup counting data.  */
-  if (kcountsize < highpc - lowpc)
-    {
-#if 0
-      s_scale = ((double) kcountsize / (highpc - lowpc)) * SCALE_1_TO_1;
-#else
-      size_t range = highpc - lowpc;
-      size_t quot = range / kcountsize;
-
-      if (quot >= SCALE_1_TO_1)
-	s_scale = 1;
-      else if (quot >= SCALE_1_TO_1 / 256)
-	s_scale = SCALE_1_TO_1 / quot;
-      else if (range > ULONG_MAX / 256)
-	s_scale = (SCALE_1_TO_1 * 256) / (range / (kcountsize / 256));
-      else
-	s_scale = (SCALE_1_TO_1 * 256) / ((range * 256) / kcountsize);
-#endif
-    }
-  else
-    s_scale = SCALE_1_TO_1;
-
-  /* Start the profiler.  */
-  profil ((void *) kcount, kcountsize, lowpc, s_scale);
-
-  /* Turn on profiling.  */
-  running = 1;
-}
-
-
-void
-_dl_mcount (ElfW(Addr) frompc, ElfW(Addr) selfpc)
-{
-  volatile uint16_t *topcindex;
-  size_t i, fromindex;
-  struct here_fromstruct *fromp;
-
-  if (! running)
-    return;
-
-  /* Compute relative addresses.  The shared object can be loaded at
-     any address.  The value of frompc could be anything.  We cannot
-     restrict it in any way, just set to a fixed value (0) in case it
-     is outside the allowed range.  These calls show up as calls from
-     <external> in the gprof output.  */
-  frompc -= lowpc;
-  if (frompc >= textsize)
-    frompc = 0;
-  selfpc -= lowpc;
-  if (selfpc >= textsize)
-    goto done;
-
-  /* Getting here we now have to find out whether the location was
-     already used.  If yes we are lucky and only have to increment a
-     counter (this also has to be atomic).  If the entry is new things
-     are getting complicated...  */
-
-  /* Avoid integer divide if possible.  */
-  if ((HASHFRACTION & (HASHFRACTION - 1)) == 0)
-    i = selfpc >> log_hashfraction;
-  else
-    i = selfpc / (hashfraction * sizeof (*tos));
-
-  topcindex = &tos[i];
-  fromindex = *topcindex;
-
-  if (fromindex == 0)
-    goto check_new_or_add;
-
-  fromp = &froms[fromindex];
-
-  /* We have to look through the chain of arcs whether there is already
-     an entry for our arc.  */
-  while (fromp->here->from_pc != frompc)
-    {
-      if (fromp->link != 0)
-	do
-	  fromp = &froms[fromp->link];
-	while (fromp->link != 0 && fromp->here->from_pc != frompc);
-
-      if (fromp->here->from_pc != frompc)
-	{
-	  topcindex = &fromp->link;
-
-	check_new_or_add:
-	  /* Our entry is not among the entries we read so far from the
-	     data file.  Now see whether we have to update the list.  */
-	  while (narcs != *narcsp && narcs < fromlimit)
-	    {
-	      size_t to_index;
-	      size_t newfromidx;
-	      to_index = (data[narcs].self_pc
-			  / (hashfraction * sizeof (*tos)));
-	      newfromidx = exchange_and_add (&fromidx, 1) + 1;
-	      froms[newfromidx].here = &data[narcs];
-	      froms[newfromidx].link = tos[to_index];
-	      tos[to_index] = newfromidx;
-	      atomic_add (&narcs, 1);
-	    }
-
-	  /* If we still have no entry stop searching and insert.  */
-	  if (*topcindex == 0)
-	    {
-	      uint32_t newarc = exchange_and_add (narcsp, 1);
-
-	      /* In rare cases it could happen that all entries in FROMS are
-		 occupied.  So we cannot count this anymore.  */
-	      if (newarc >= fromlimit)
-		goto done;
-
-	      *topcindex = exchange_and_add (&fromidx, 1) + 1;
-	      fromp = &froms[*topcindex];
-
-	      fromp->here = &data[newarc];
-	      data[newarc].from_pc = frompc;
-	      data[newarc].self_pc = selfpc;
-	      data[newarc].count = 0;
-	      fromp->link = 0;
-	      atomic_add (&narcs, 1);
-
-	      break;
-	    }
-
-	  fromp = &froms[*topcindex];
-	}
-      else
-	/* Found in.  */
-	break;
-    }
-
-  /* Increment the counter.  */
-  atomic_add (&fromp->here->count, 1);
-
- done:
-  ;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-profstub.c b/newlib/libc/sys/linux/dl/dl-profstub.c
deleted file mode 100644
index 41758864b..000000000
--- a/newlib/libc/sys/linux/dl/dl-profstub.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Helper definitions for profiling of shared libraries.
-   Copyright (C) 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <elf.h>
-#include <ldsodefs.h>
-#include <libc-symbols.h>
-
-/* This is the map for the shared object we profile.  It is defined here
-   only because we test for this value being NULL or not.  */
-extern struct link_map *_dl_profile_map;
-
-
-void
-_dl_mcount_wrapper (void *selfpc)
-{
-  _dl_mcount ((ElfW(Addr)) RETURN_ADDRESS (0), (ElfW(Addr)) selfpc);
-}
-
-
-void
-_dl_mcount_wrapper_check (void *selfpc)
-{
-  if (_dl_profile_map != NULL)
-    _dl_mcount ((ElfW(Addr)) RETURN_ADDRESS (0), (ElfW(Addr)) selfpc);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-reloc.c b/newlib/libc/sys/linux/dl/dl-reloc.c
deleted file mode 100644
index 94163143e..000000000
--- a/newlib/libc/sys/linux/dl/dl-reloc.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* Relocate a shared object and resolve its references to other loaded objects.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include "dynamic-link.h"
-
-/* Statistics function.  */
-unsigned long int _dl_num_cache_relocations;
-
-
-void
-_dl_relocate_object (struct link_map *l, struct r_scope_elem *scope[],
-		     int lazy, int consider_profiling)
-{
-  struct textrels
-  {
-    caddr_t start;
-    size_t len;
-    int prot;
-    struct textrels *next;
-  } *textrels = NULL;
-  /* Initialize it to make the compiler happy.  */
-  const char *errstring = NULL;
-
-  if (l->l_relocated)
-    return;
-
-  /* If DT_BIND_NOW is set relocate all references in this object.  We
-     do not do this if we are profiling, of course.  */
-  if (!consider_profiling
-      && __builtin_expect (l->l_info[DT_BIND_NOW] != NULL, 0))
-    lazy = 0;
-
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_RELOC, 0))
-    _dl_printf ("\nrelocation processing: %s%s\n",
-		l->l_name[0] ? l->l_name : _dl_argv[0], lazy ? " (lazy)" : "");
-
-  /* DT_TEXTREL is now in level 2 and might phase out at some time.
-     But we rewrite the DT_FLAGS entry to a DT_TEXTREL entry to make
-     testing easier and therefore it will be available at all time.  */
-  if (__builtin_expect (l->l_info[DT_TEXTREL] != NULL, 0))
-    {
-      /* Bletch.  We must make read-only segments writable
-	 long enough to relocate them.  */
-      const ElfW(Phdr) *ph;
-      for (ph = l->l_phdr; ph < &l->l_phdr[l->l_phnum]; ++ph)
-	if (ph->p_type == PT_LOAD && (ph->p_flags & PF_W) == 0)
-	  {
-	    struct textrels *newp;
-
-	    newp = (struct textrels *) alloca (sizeof (*newp));
-	    newp->len = (((ph->p_vaddr + ph->p_memsz + _dl_pagesize - 1)
-			  & ~(_dl_pagesize - 1))
-			 - (ph->p_vaddr & ~(_dl_pagesize - 1)));
-	    newp->start = ((ph->p_vaddr & ~(_dl_pagesize - 1))
-			   + (caddr_t) l->l_addr);
-
-	    if (mprotect (newp->start, newp->len, PROT_READ|PROT_WRITE) < 0)
-	      {
-		errstring = N_("cannot make segment writable for relocation");
-	      call_error:
-		_dl_signal_error (errno, l->l_name, NULL, errstring);
-	      }
-
-#if (PF_R | PF_W | PF_X) == 7 && (PROT_READ | PROT_WRITE | PROT_EXEC) == 7
-	    newp->prot = (PF_TO_PROT
-			  >> ((ph->p_flags & (PF_R | PF_W | PF_X)) * 4)) & 0xf;
-#else
-	    newp->prot = 0;
-	    if (ph->p_flags & PF_R)
-	      newp->prot |= PROT_READ;
-	    if (ph->p_flags & PF_W)
-	      newp->prot |= PROT_WRITE;
-	    if (ph->p_flags & PF_X)
-	      newp->prot |= PROT_EXEC;
-#endif
-	    newp->next = textrels;
-	    textrels = newp;
-	  }
-    }
-
-  {
-    /* Do the actual relocation of the object's GOT and other data.  */
-
-    /* String table object symbols.  */
-    const char *strtab = (const void *) D_PTR (l, l_info[DT_STRTAB]);
-
-    /* This macro is used as a callback from the ELF_DYNAMIC_RELOCATE code.  */
-#define RESOLVE_MAP(ref, version, r_type) \
-    (ELFW(ST_BIND) ((*ref)->st_info) != STB_LOCAL			      \
-     ? ((__builtin_expect ((*ref) == l->l_lookup_cache.sym, 0)		      \
-	 && elf_machine_type_class (r_type) == l->l_lookup_cache.type_class)  \
-	? (++_dl_num_cache_relocations,					      \
-	   (*ref) = l->l_lookup_cache.ret,				      \
-	   l->l_lookup_cache.value)					      \
-	: ({ lookup_t _lr;						      \
-	     int _tc = elf_machine_type_class (r_type);			      \
-	     l->l_lookup_cache.type_class = _tc;			      \
-	     l->l_lookup_cache.sym = (*ref);				      \
-	     _lr = ((version) != NULL && (version)->hash != 0		      \
-		    ? _dl_lookup_versioned_symbol (strtab + (*ref)->st_name,  \
-						   l, (ref), scope,	      \
-						   (version), _tc, 0)	      \
-		    : _dl_lookup_symbol (strtab + (*ref)->st_name, l, (ref),  \
-					 scope, _tc, 0));		      \
-	     l->l_lookup_cache.ret = (*ref);				      \
-	     l->l_lookup_cache.value = _lr; }))				      \
-     : l)
-#define RESOLVE(ref, version, r_type) \
-    (ELFW(ST_BIND) ((*ref)->st_info) != STB_LOCAL			      \
-     ? ((__builtin_expect ((*ref) == l->l_lookup_cache.sym, 0)		      \
-	 && elf_machine_type_class (r_type) == l->l_lookup_cache.type_class)  \
-	? (++_dl_num_cache_relocations,					      \
-	   (*ref) = l->l_lookup_cache.ret,				      \
-	   l->l_lookup_cache.value)					      \
-	: ({ lookup_t _lr;						      \
-	     int _tc = elf_machine_type_class (r_type);			      \
-	     l->l_lookup_cache.type_class = _tc;			      \
-	     l->l_lookup_cache.sym = (*ref);				      \
-	     _lr = ((version) != NULL && (version)->hash != 0		      \
-		    ? _dl_lookup_versioned_symbol (strtab + (*ref)->st_name,  \
-						   l, (ref), scope,	      \
-						   (version), _tc, 0)	      \
-		    : _dl_lookup_symbol (strtab + (*ref)->st_name, l, (ref),  \
-					 scope, _tc, 0));		      \
-	     l->l_lookup_cache.ret = (*ref);				      \
-	     l->l_lookup_cache.value = _lr; }))				      \
-     : l->l_addr)
-
-#include "dynamic-link.h"
-
-    ELF_DYNAMIC_RELOCATE (l, lazy, consider_profiling);
-
-    if (__builtin_expect (consider_profiling, 0))
-      {
-	/* Allocate the array which will contain the already found
-	   relocations.  If the shared object lacks a PLT (for example
-	   if it only contains lead function) the l_info[DT_PLTRELSZ]
-	   will be NULL.  */
-	if (l->l_info[DT_PLTRELSZ] == NULL)
-	  {
-	    errstring = N_("%s: profiler found no PLTREL in object %s\n");
-	  fatal:
-	    _dl_fatal_printf (errstring,
-			      _dl_argv[0] ?: "<program name unknown>",
-			      l->l_name);
-	  }
-
-	l->l_reloc_result =
-	  (ElfW(Addr) *) calloc (sizeof (ElfW(Addr)),
-				 l->l_info[DT_PLTRELSZ]->d_un.d_val);
-	if (l->l_reloc_result == NULL)
-	  {
-	    errstring = N_("\
-%s: profiler out of memory shadowing PLTREL of %s\n");
-	    goto fatal;
-	  }
-      }
-  }
-
-  /* Mark the object so we know this work has been done.  */
-  l->l_relocated = 1;
-
-  /* Undo the segment protection changes.  */
-  while (__builtin_expect (textrels != NULL, 0))
-    {
-      if (mprotect (textrels->start, textrels->len, textrels->prot) < 0)
-	{
-	  errstring = N_("cannot restore segment prot after reloc");
-	  goto call_error;
-	}
-
-      textrels = textrels->next;
-    }
-}
-
-
-void
-internal_function
-_dl_reloc_bad_type (struct link_map *map, unsigned int type, int plt)
-{
-  /* XXX We cannot translate these messages.  */
-  static const char msg[2][32] = { "unexpected reloc type",
-				   "unexpected PLT reloc type" };
-  char msgbuf[sizeof (msg[0])];
-
-  strcpy (msgbuf, msg[plt]);
-
-  _dl_signal_error (0, map->l_name, NULL, msgbuf);
-}
diff --git a/newlib/libc/sys/linux/dl/dl-runtime.c b/newlib/libc/sys/linux/dl/dl-runtime.c
deleted file mode 100644
index 111acfb71..000000000
--- a/newlib/libc/sys/linux/dl/dl-runtime.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/* On-demand PLT fixup for shared objects.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <ldsodefs.h>
-#include "dynamic-link.h"
-
-#define __attribute_used__
-
-#if !defined ELF_MACHINE_NO_RELA || ELF_MACHINE_NO_REL
-# define PLTREL  ElfW(Rela)
-#else
-# define PLTREL  ElfW(Rel)
-#endif
-
-#ifndef VERSYMIDX
-# define VERSYMIDX(sym)	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGIDX (sym))
-#endif
-
-
-/* This function is called through a special trampoline from the PLT the
-   first time each PLT entry is called.  We must perform the relocation
-   specified in the PLT of the given shared object, and return the resolved
-   function address to the trampoline, which will restart the original call
-   to that address.  Future calls will bounce directly from the PLT to the
-   function.  */
-
-#ifndef ELF_MACHINE_NO_PLT
-static ElfW(Addr) __attribute_used__
-fixup (
-# ifdef ELF_MACHINE_RUNTIME_FIXUP_ARGS
-        ELF_MACHINE_RUNTIME_FIXUP_ARGS,
-# endif
-	/* GKM FIXME: Fix trampoline to pass bounds so we can do
-	   without the `__unbounded' qualifier.  */
-       struct link_map *__unbounded l, ElfW(Word) reloc_offset)
-{
-  const ElfW(Sym) *const symtab
-    = (const void *) D_PTR (l, l_info[DT_SYMTAB]);
-  const char *strtab = (const void *) D_PTR (l, l_info[DT_STRTAB]);
-
-  const PLTREL *const reloc
-    = (const void *) (D_PTR (l, l_info[DT_JMPREL]) + reloc_offset);
-  const ElfW(Sym) *sym = &symtab[ELFW(R_SYM) (reloc->r_info)];
-  void *const rel_addr = (void *)(l->l_addr + reloc->r_offset);
-  lookup_t result;
-  ElfW(Addr) value;
-
-  /* The use of `alloca' here looks ridiculous but it helps.  The goal is
-     to prevent the function from being inlined and thus optimized out.
-     There is no official way to do this so we use this trick.  gcc never
-     inlines functions which use `alloca'.  */
-  alloca (sizeof (int));
-
-  /* Sanity check that we're really looking at a PLT relocation.  */
-  assert (ELFW(R_TYPE)(reloc->r_info) == ELF_MACHINE_JMP_SLOT);
-
-   /* Look up the target symbol.  If the normal lookup rules are not
-      used don't look in the global scope.  */
-  if (__builtin_expect (ELFW(ST_VISIBILITY) (sym->st_other), 0) == 0)
-    {
-      switch (l->l_info[VERSYMIDX (DT_VERSYM)] != NULL)
-	{
-	default:
-	  {
-	    const ElfW(Half) *vernum =
-	      (const void *) D_PTR (l, l_info[VERSYMIDX (DT_VERSYM)]);
-	    ElfW(Half) ndx = vernum[ELFW(R_SYM) (reloc->r_info)];
-	    const struct r_found_version *version = &l->l_versions[ndx];
-
-	    if (version->hash != 0)
-	      {
-		result = _dl_lookup_versioned_symbol (strtab + sym->st_name,
-						      l, &sym, l->l_scope,
-						      version,
-						      ELF_RTYPE_CLASS_PLT, 0);
-		break;
-	      }
-	  }
-	case 0:
-	  result = _dl_lookup_symbol (strtab + sym->st_name, l, &sym,
-				      l->l_scope, ELF_RTYPE_CLASS_PLT, 0);
-	}
-
-      /* Currently result contains the base load address (or link map)
-	 of the object that defines sym.  Now add in the symbol
-	 offset.  */
-      value = (sym ? LOOKUP_VALUE_ADDRESS (result) + sym->st_value : 0);
-    }
-  else
-    {
-      /* We already found the symbol.  The module (and therefore its load
-	 address) is also known.  */
-      value = l->l_addr + sym->st_value;
-#ifdef DL_LOOKUP_RETURNS_MAP
-      result = l;
-#endif
-    }
-
-  /* And now perhaps the relocation addend.  */
-  value = elf_machine_plt_value (l, reloc, value);
-
-  /* Finally, fix up the plt itself.  */
-  if (__builtin_expect (_dl_bind_not, 0))
-    return value;
-
-  return elf_machine_fixup_plt (l, result, reloc, rel_addr, value);
-}
-#endif
-
-#if !defined PROF && !defined ELF_MACHINE_NO_PLT && !__BOUNDED_POINTERS__
-
-static ElfW(Addr) __attribute_used__
-profile_fixup (
-#ifdef ELF_MACHINE_RUNTIME_FIXUP_ARGS
-       ELF_MACHINE_RUNTIME_FIXUP_ARGS,
-#endif
-       struct link_map *l, ElfW(Word) reloc_offset, ElfW(Addr) retaddr)
-{
-  void (*mcount_fct) (ElfW(Addr), ElfW(Addr)) = _dl_mcount;
-  ElfW(Addr) *resultp;
-  lookup_t result;
-  ElfW(Addr) value;
-
-  /* The use of `alloca' here looks ridiculous but it helps.  The goal is
-     to prevent the function from being inlined, and thus optimized out.
-     There is no official way to do this so we use this trick.  gcc never
-     inlines functions which use `alloca'.  */
-  alloca (sizeof (int));
-
-  /* This is the address in the array where we store the result of previous
-     relocations.  */
-  resultp = &l->l_reloc_result[reloc_offset / sizeof (PLTREL)];
-
-  value = *resultp;
-  if (value == 0)
-    {
-      /* This is the first time we have to relocate this object.  */
-      const ElfW(Sym) *const symtab
-	= (const void *) D_PTR (l, l_info[DT_SYMTAB]);
-      const char *strtab = (const void *) D_PTR (l, l_info[DT_STRTAB]);
-
-      const PLTREL *const reloc
-	= (const void *) (D_PTR (l, l_info[DT_JMPREL]) + reloc_offset);
-      const ElfW(Sym) *sym = &symtab[ELFW(R_SYM) (reloc->r_info)];
-
-      /* Sanity check that we're really looking at a PLT relocation.  */
-      assert (ELFW(R_TYPE)(reloc->r_info) == ELF_MACHINE_JMP_SLOT);
-
-      /* Look up the target symbol.  If the symbol is marked STV_PROTECTED
-	 don't look in the global scope.  */
-      if (__builtin_expect (ELFW(ST_VISIBILITY) (sym->st_other), 0) == 0)
-	{
-	  switch (l->l_info[VERSYMIDX (DT_VERSYM)] != NULL)
-	    {
-	    default:
-	      {
-		const ElfW(Half) *vernum =
-		  (const void *) D_PTR (l,l_info[VERSYMIDX (DT_VERSYM)]);
-		ElfW(Half) ndx = vernum[ELFW(R_SYM) (reloc->r_info)];
-		const struct r_found_version *version = &l->l_versions[ndx];
-
-		if (version->hash != 0)
-		  {
-		    result = _dl_lookup_versioned_symbol(strtab + sym->st_name,
-							 l, &sym, l->l_scope,
-							 version,
-							 ELF_RTYPE_CLASS_PLT,
-							 0);
-		    break;
-		  }
-	      }
-	    case 0:
-	      result = _dl_lookup_symbol (strtab + sym->st_name, l, &sym,
-					  l->l_scope, ELF_RTYPE_CLASS_PLT, 0);
-	    }
-
-	  /* Currently result contains the base load address (or link map)
-	     of the object that defines sym.  Now add in the symbol
-	     offset.  */
-	  value = (sym ? LOOKUP_VALUE_ADDRESS (result) + sym->st_value : 0);
-	}
-      else
-	{
-	  /* We already found the symbol.  The module (and therefore its load
-	     address) is also known.  */
-	  value = l->l_addr + sym->st_value;
-#ifdef DL_LOOKUP_RETURNS_MAP
-	  result = l;
-#endif
-	}
-      /* And now perhaps the relocation addend.  */
-      value = elf_machine_plt_value (l, reloc, value);
-
-      /* Store the result for later runs.  */
-      if (__builtin_expect (! _dl_bind_not, 1))
-	*resultp = value;
-    }
-
-  (*mcount_fct) (retaddr, value);
-
-  return value;
-}
-
-#endif /* PROF && ELF_MACHINE_NO_PLT */
-
-
-/* This macro is defined in dl-machine.h to define the entry point called
-   by the PLT.  The `fixup' function above does the real work, but a little
-   more twiddling is needed to get the stack right and jump to the address
-   finally resolved.  */
-
-ELF_MACHINE_RUNTIME_TRAMPOLINE
diff --git a/newlib/libc/sys/linux/dl/dl-support.c b/newlib/libc/sys/linux/dl/dl-support.c
deleted file mode 100644
index b7cb560a6..000000000
--- a/newlib/libc/sys/linux/dl/dl-support.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* Support for dynamic linking code in static libc.
-   Copyright (C) 1996, 97, 98, 99, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file defines some things that for the dynamic linker are defined in
-   rtld.c and dl-sysdep.c in ways appropriate to bootstrap dynamic linking.  */
-
-#include <errno.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <pthread.h>
-#include <ldsodefs.h>
-#include <machine/dl-machine.h>
-#include <dl-librecon.h>
-#include <unsecvars.h>
-#include <machine/hp-timing.h>
-
-char *__progname = "newlib";
-char **_dl_argv = &__progname;	/* This is checked for some error messages.  */
-
-/* Name of the architecture.  */
-const char *_dl_platform;
-size_t _dl_platformlen;
-
-int _dl_debug_mask;
-int _dl_lazy;
-/* XXX I know about at least one case where we depend on the old weak
-   behavior (it has to do with librt).  Until we get DSO groups implemented
-   we have to make this the default.  Bummer. --drepper  */
-#if 0
-int _dl_dynamic_weak;
-#else
-int _dl_dynamic_weak = 1;
-#endif
-
-/* If nonzero print warnings about problematic situations.  */
-int _dl_verbose;
-
-/* Structure to store information about search paths.  */
-struct r_search_path *_dl_search_paths;
-
-/* We never do profiling.  */
-const char *_dl_profile;
-
-/* Names of shared object for which the RUNPATHs and RPATHs should be
-   ignored.  */
-const char *_dl_inhibit_rpath;
-
-/* The map for the object we will profile.  */
-struct link_map *_dl_profile_map;
-
-/* This is the address of the last stack address ever used.  */
-void *__libc_stack_end;
-
-/* Path where the binary is found.  */
-const char *_dl_origin_path;
-
-/* Nonzero if runtime lookup should not update the .got/.plt.  */
-int _dl_bind_not;
-
-/* Initially empty list of loaded objects.  */
-struct link_map *_dl_loaded;
-/* Number of object in the _dl_loaded list.  */
-unsigned int _dl_nloaded;
-
-/* Fake scope.  In dynamically linked binaries this is the scope of the
-   main application but here we don't have something like this.  So
-   create a fake scope containing nothing.  */
-struct r_scope_elem _dl_initial_searchlist;
-/* Variable which can be used in lookup to process the global scope.  */
-struct r_scope_elem *_dl_global_scope[2] = { &_dl_initial_searchlist, NULL };
-/* This is a global pointer to this structure which is public.  It is
-   used by dlopen/dlclose to add and remove objects from what is regarded
-   to be the global scope.  */
-struct r_scope_elem *_dl_main_searchlist = &_dl_initial_searchlist;
-
-/* Nonzero during startup.  */
-int _dl_starting_up = 1;
-
-/* We expect less than a second for relocation.  */
-#ifdef HP_SMALL_TIMING_AVAIL
-# undef HP_TIMING_AVAIL
-# define HP_TIMING_AVAIL HP_SMALL_TIMING_AVAIL
-#endif
-
-/* Initial value of the CPU clock.  */
-#ifndef HP_TIMING_NONAVAIL
-hp_timing_t _dl_cpuclock_offset;
-#endif
-
-/* During the program run we must not modify the global data of
-   loaded shared object simultanously in two threads.  Therefore we
-   protect `_dl_open' and `_dl_close' in dl-close.c.
-
-   This must be a recursive lock since the initializer function of
-   the loaded object might as well require a call to this function.
-   At this time it is not anymore a problem to modify the tables.  */
-__LOCK_RECURSIVE_INIT (, _dl_load_lock)
-
-
-#ifdef HAVE_AUX_VECTOR
-extern int _dl_clktck;
-
-void
-internal_function
-_dl_aux_init (ElfW(auxv_t) *av)
-{
-  for (; av->a_type != AT_NULL; ++av)
-    switch (av->a_type)
-      {
-      case AT_PAGESZ:
-	_dl_pagesize = av->a_un.a_val;
-	break;
-      case AT_CLKTCK:
-	_dl_clktck = av->a_un.a_val;
-	break;
-      }
-}
-#endif
-
-void non_dynamic_init (void) __attribute__ ((unused));
-
-void
-non_dynamic_init (void)
-{
-  if (HP_TIMING_AVAIL)
-    HP_TIMING_NOW (_dl_cpuclock_offset);
-
-  if (!_dl_pagesize)
-    _dl_pagesize = __getpagesize ();
-
-  _dl_verbose = *(getenv ("LD_WARN") ?: "") == '\0' ? 0 : 1;
-
-  /* Initialize the data structures for the search paths for shared
-     objects.  */
-  _dl_init_paths (getenv ("LD_LIBRARY_PATH"));
-
-  _dl_lazy = *(getenv ("LD_BIND_NOW") ?: "") == '\0';
-
-  _dl_bind_not = *(getenv ("LD_BIND_NOT") ?: "") != '\0';
-
-  _dl_dynamic_weak = *(getenv ("LD_DYNAMIC_WEAK") ?: "") == '\0';
-
-#ifdef DL_PLATFORM_INIT
-  DL_PLATFORM_INIT;
-#endif
-
-  /* Now determine the length of the platform string.  */
-  if (_dl_platform != NULL)
-    _dl_platformlen = strlen (_dl_platform);
-}
-text_set_element (__libc_subinit, non_dynamic_init);
-
-const struct r_strlenpair *
-internal_function
-_dl_important_hwcaps (const char *platform, size_t platform_len, size_t *sz,
-		      size_t *max_capstrlen)
-{
-  static struct r_strlenpair result;
-  static char buf[1];
-
-  result.str = buf;	/* Does not really matter.  */
-  result.len = 0;
-
-  *sz = 1;
-  return &result;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-sym.c b/newlib/libc/sys/linux/dl/dl-sym.c
deleted file mode 100644
index 85d084f7f..000000000
--- a/newlib/libc/sys/linux/dl/dl-sym.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/* Look up a symbol in a shared object loaded by `dlopen'.
-   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <setjmp.h>
-#include <libintl.h>
-
-#include <dlfcn.h>
-#include <ldsodefs.h>
-#include <dl-hash.h>
-
-void *
-internal_function
-_dl_sym (void *handle, const char *name, void *who)
-{
-  const ElfW(Sym) *ref = NULL;
-  lookup_t result;
-  ElfW(Addr) caller = (ElfW(Addr)) who;
-  struct link_map *match;
-  struct link_map *l;
-
-  /* If the address is not recognized the call comes from the main
-     program (we hope).  */
-  match = _dl_loaded;
-
-  /* Find the highest-addressed object that CALLER is not below.  */
-  for (l = _dl_loaded; l != NULL; l = l->l_next)
-    if (caller >= l->l_map_start && caller < l->l_map_end)
-      {
-	/* There must be exactly one DSO for the range of the virtual
-	   memory.  Otherwise something is really broken.  */
-	match = l;
-	break;
-      }
-
-  if (handle == RTLD_DEFAULT)
-    /* Search the global scope as seen in the caller object.  */
-    result = _dl_lookup_symbol (name, match, &ref, match->l_scope, 0, 0);
-  else
-    {
-      if (handle != RTLD_NEXT)
-	{
-	  /* Search the scope of the given object.  */
-	  struct link_map *map = handle;
-
-	  result = _dl_lookup_symbol (name, match, &ref, map->l_local_scope,
-				      0, 1);
-	}
-      else
-	{
-	  if (__builtin_expect (match == _dl_loaded, 0))
-	    {
-	      if (! _dl_loaded
-		  || caller < _dl_loaded->l_map_start
-		  || caller >= _dl_loaded->l_map_end)
-	        _dl_signal_error (0, NULL, NULL, N_("\
-RTLD_NEXT used in code not dynamically loaded"));
-	    }
-
-	  l = match;
-	  while (l->l_loader != NULL)
-	    l = l->l_loader;
-
-	  result = _dl_lookup_symbol_skip (name, l, &ref, l->l_local_scope,
-					   match);
-	}
-    }
-
-  if (ref != NULL)
-    return DL_SYMBOL_ADDRESS (result, ref);
-
-  return NULL;
-}
-
-void *
-internal_function
-_dl_vsym (void *handle, const char *name, const char *version, void *who)
-{
-  const ElfW(Sym) *ref = NULL;
-  struct r_found_version vers;
-  lookup_t result;
-  ElfW(Addr) caller = (ElfW(Addr)) who;
-  struct link_map *match;
-  struct link_map *l;
-
-  /* Compute hash value to the version string.  */
-  vers.name = version;
-  vers.hidden = 1;
-  vers.hash = _dl_elf_hash (version);
-  /* We don't have a specific file where the symbol can be found.  */
-  vers.filename = NULL;
-
-  /* If the address is not recognized the call comes from the main
-     program (we hope).  */
-  match = _dl_loaded;
-
-  /* Find the highest-addressed object that CALLER is not below.  */
-  for (l = _dl_loaded; l != NULL; l = l->l_next)
-    if (caller >= l->l_map_start && caller < l->l_map_end)
-      {
-	/* There must be exactly one DSO for the range of the virtual
-	   memory.  Otherwise something is really broken.  */
-	match = l;
-	break;
-      }
-
-  if (handle == RTLD_DEFAULT)
-    /* Search the global scope.  */
-    result = _dl_lookup_versioned_symbol (name, match, &ref, match->l_scope,
-					  &vers, 0, 0);
-  else if (handle == RTLD_NEXT)
-    {
-      if (__builtin_expect (match == _dl_loaded, 0))
-	{
-	  if (! _dl_loaded
-	      || caller < _dl_loaded->l_map_start
-	      || caller >= _dl_loaded->l_map_end)
-	    _dl_signal_error (0, NULL, NULL, N_("\
-RTLD_NEXT used in code not dynamically loaded"));
-	}
-
-      l = match;
-      while (l->l_loader != NULL)
-	l = l->l_loader;
-
-      result = _dl_lookup_versioned_symbol_skip (name, l, &ref,
-						 l->l_local_scope,
-						 &vers, match);
-    }
-  else
-    {
-      /* Search the scope of the given object.  */
-      struct link_map *map = handle;
-      result = _dl_lookup_versioned_symbol (name, map, &ref,
-					    map->l_local_scope, &vers, 0, 1);
-    }
-
-  if (ref != NULL)
-    return DL_SYMBOL_ADDRESS (result, ref);
-
-  return NULL;
-}
diff --git a/newlib/libc/sys/linux/dl/dl-version.c b/newlib/libc/sys/linux/dl/dl-version.c
deleted file mode 100644
index eefbea7ec..000000000
--- a/newlib/libc/sys/linux/dl/dl-version.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/* Handle symbol and library versioning.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <elf.h>
-#include <errno.h>
-#include <libintl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ldsodefs.h>
-
-#include <assert.h>
-
-
-#ifndef VERSYMIDX
-# define VERSYMIDX(tag)	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGIDX (tag))
-#endif
-
-
-#define make_string(string, rest...) \
-  ({									      \
-    const char *all[] = { string, ## rest };				      \
-    size_t len, cnt;							      \
-    char *result, *cp;							      \
-									      \
-    len = 1;								      \
-    for (cnt = 0; cnt < sizeof (all) / sizeof (all[0]); ++cnt)		      \
-      len += strlen (all[cnt]);						      \
-									      \
-    cp = result = alloca (len);						      \
-    for (cnt = 0; cnt < sizeof (all) / sizeof (all[0]); ++cnt)		      \
-    {                    						      \
-      cp = strcpy (cp, all[cnt]);					      \
-      cp += strlen (all[cnt]);					              \
-    }                    						      \
-									      \
-    result;								      \
-  })
-
-
-static inline struct link_map *
-find_needed (const char *name, struct link_map *map)
-{
-  struct link_map *tmap;
-  unsigned int n;
-
-  for (tmap = _dl_loaded; tmap != NULL; tmap = tmap->l_next)
-    if (_dl_name_match_p (name, tmap))
-      return tmap;
-
-  /* The required object is not in the global scope, look to see if it is
-     a dependency of the current object.  */
-  for (n = 0; n < map->l_searchlist.r_nlist; n++)
-    if (_dl_name_match_p (name, map->l_searchlist.r_list[n]))
-      return map->l_searchlist.r_list[n];
-
-  /* Should never happen.  */
-  return NULL;
-}
-
-
-static int
-internal_function
-match_symbol (const char *name, ElfW(Word) hash, const char *string,
-	      struct link_map *map, int verbose, int weak)
-{
-  const char *strtab = (const void *) D_PTR (map, l_info[DT_STRTAB]);
-  ElfW(Addr) def_offset;
-  ElfW(Verdef) *def;
-  /* Initialize to make the compiler happy.  */
-  const char *errstring = NULL;
-  int result = 0;
-
-  /* Display information about what we are doing while debugging.  */
-  if (__builtin_expect (_dl_debug_mask & DL_DEBUG_VERSIONS, 0))
-    _dl_debug_printf ("\
-checking for version `%s' in file %s required by file %s\n",
-		      string, map->l_name[0] ? map->l_name : _dl_argv[0],
-		      name);
-
-  if (__builtin_expect (map->l_info[VERSYMIDX (DT_VERDEF)] == NULL, 0))
-    {
-      /* The file has no symbol versioning.  I.e., the dependent
-	 object was linked against another version of this file.  We
-	 only print a message if verbose output is requested.  */
-      if (verbose)
-	{
-	  /* XXX We cannot translate the messages.  */
-	  errstring = make_string ("\
-no version information available (required by ", name, ")");
-	  goto call_cerror;
-	}
-      return 0;
-    }
-
-  def_offset = map->l_info[VERSYMIDX (DT_VERDEF)]->d_un.d_ptr;
-  assert (def_offset != 0);
-
-  def = (ElfW(Verdef) *) ((char *) map->l_addr + def_offset);
-  while (1)
-    {
-      /* Currently the version number of the definition entry is 1.
-	 Make sure all we see is this version.  */
-      if (__builtin_expect (def->vd_version, 1) != 1)
-	{
-	  char buf[20];
-	  buf[sizeof (buf) - 1] = '\0';
-	  /* XXX We cannot translate the message.  */
-	  errstring = make_string ("unsupported version of Verdef record");
-	  result = 1;
-	  goto call_cerror;
-	}
-
-      /* Compare the hash values.  */
-      if (hash == def->vd_hash)
-	{
-	  ElfW(Verdaux) *aux = (ElfW(Verdaux) *) ((char *) def + def->vd_aux);
-
-	  /* To be safe, compare the string as well.  */
-	  if (__builtin_expect (strcmp (string, strtab + aux->vda_name), 0)
-	      == 0)
-	    /* Bingo!  */
-	    return 0;
-	}
-
-      /* If no more definitions we failed to find what we want.  */
-      if (def->vd_next == 0)
-	break;
-
-      /* Next definition.  */
-      def = (ElfW(Verdef) *) ((char *) def + def->vd_next);
-    }
-
-  /* Symbol not found.  If it was a weak reference it is not fatal.  */
-  if (__builtin_expect (weak, 1))
-    {
-      if (verbose)
-	{
-	  /* XXX We cannot translate the message.  */
-	  errstring = make_string ("weak version `", string,
-				   "' not found (required by ", name, ")");
-	  goto call_cerror;
-	}
-      return 0;
-    }
-
-  /* XXX We cannot translate the message.  */
-  errstring = make_string ("version `", string, "' not found (required by ",
-			   name, ")");
-  result = 1;
- call_cerror:
-  _dl_signal_cerror (0, map->l_name[0] ? map->l_name : _dl_argv[0], NULL,
-		     errstring);
-  return result;
-}
-
-
-int
-internal_function
-_dl_check_map_versions (struct link_map *map, int verbose, int trace_mode)
-{
-  int result = 0;
-  const char *strtab;
-  /* Pointer to section with needed versions.  */
-  ElfW(Dyn) *dyn;
-  /* Pointer to dynamic section with definitions.  */
-  ElfW(Dyn) *def;
-  /* We need to find out which is the highest version index used
-    in a dependecy.  */
-  unsigned int ndx_high = 0;
-  /* Initialize to make the compiler happy.  */
-  const char *errstring = NULL;
-  int errval = 0;
-
-  /* If we don't have a string table, we must be ok.  */
-  if (map->l_info[DT_STRTAB] == NULL)
-    return 0;
-  strtab = (const void *) D_PTR (map, l_info[DT_STRTAB]);
-
-  dyn = map->l_info[VERSYMIDX (DT_VERNEED)];
-  def = map->l_info[VERSYMIDX (DT_VERDEF)];
-
-  if (dyn != NULL)
-    {
-      /* This file requires special versions from its dependencies.  */
-      ElfW(Verneed) *ent = (ElfW(Verneed) *) (map->l_addr + dyn->d_un.d_ptr);
-
-      /* Currently the version number of the needed entry is 1.
-	 Make sure all we see is this version.  */
-      if (__builtin_expect (ent->vn_version, 1) != 1)
-	{
-	  char buf[20];
-	  buf[sizeof (buf) - 1] = '\0';
-	  /* XXX We cannot translate the message.  */
-	  errstring = make_string ("unsupported version of Verneed record\n");
-	call_error:
-	  _dl_signal_error (errval, (*map->l_name ? map->l_name : _dl_argv[0]),
-			    NULL, errstring);
-	}
-
-      while (1)
-	{
-	  ElfW(Vernaux) *aux;
-	  struct link_map *needed = find_needed (strtab + ent->vn_file, map);
-
-	  /* If NEEDED is NULL this means a dependency was not found
-	     and no stub entry was created.  This should never happen.  */
-	  assert (needed != NULL);
-
-	  /* Make sure this is no stub we created because of a missing
-	     dependency.  */
-	  if (__builtin_expect (! trace_mode, 1)
-	      || ! __builtin_expect (needed->l_faked, 0))
-	    {
-	      /* NEEDED is the map for the file we need.  Now look for the
-		 dependency symbols.  */
-	      aux = (ElfW(Vernaux) *) ((char *) ent + ent->vn_aux);
-	      while (1)
-		{
-		  /* Match the symbol.  */
-		  result |= match_symbol ((*map->l_name
-					   ? map->l_name : _dl_argv[0]),
-					  aux->vna_hash,
-					  strtab + aux->vna_name,
-					  needed, verbose,
-					  aux->vna_flags & VER_FLG_WEAK);
-
-		  /* Compare the version index.  */
-		  if ((unsigned int) (aux->vna_other & 0x7fff) > ndx_high)
-		    ndx_high = aux->vna_other & 0x7fff;
-
-		  if (aux->vna_next == 0)
-		    /* No more symbols.  */
-		    break;
-
-		  /* Next symbol.  */
-		  aux = (ElfW(Vernaux) *) ((char *) aux + aux->vna_next);
-		}
-	    }
-
-	  if (ent->vn_next == 0)
-	    /* No more dependencies.  */
-	    break;
-
-	  /* Next dependency.  */
-	  ent = (ElfW(Verneed) *) ((char *) ent + ent->vn_next);
-	}
-    }
-
-  /* We also must store the names of the defined versions.  Determine
-     the maximum index here as well.
-
-     XXX We could avoid the loop by just taking the number of definitions
-     as an upper bound of new indeces.  */
-  if (def != NULL)
-    {
-      ElfW(Verdef) *ent;
-      ent = (ElfW(Verdef) *) (map->l_addr + def->d_un.d_ptr);
-      while (1)
-	{
-	  if ((unsigned int) (ent->vd_ndx & 0x7fff) > ndx_high)
-	    ndx_high = ent->vd_ndx & 0x7fff;
-
-	  if (ent->vd_next == 0)
-	    /* No more definitions.  */
-	    break;
-
-	  ent = (ElfW(Verdef) *) ((char *) ent + ent->vd_next);
-	}
-    }
-
-  if (ndx_high > 0)
-    {
-      /* Now we are ready to build the array with the version names
-	 which can be indexed by the version index in the VERSYM
-	 section.  */
-      map->l_versions = (struct r_found_version *)
-	calloc (ndx_high + 1, sizeof (*map->l_versions));
-      if (__builtin_expect (map->l_versions == NULL, 0))
-	{
-	  errstring = N_("cannot allocate version reference table");
-	  errval = ENOMEM;
-	  goto call_error;
-	}
-
-      /* Store the number of available symbols.  */
-      map->l_nversions = ndx_high + 1;
-
-      /* Compute the pointer to the version symbols.  */
-      map->l_versyms = (void *) D_PTR (map, l_info[VERSYMIDX (DT_VERSYM)]);
-
-      if (dyn != NULL)
-	{
-	  ElfW(Verneed) *ent;
-	  ent = (ElfW(Verneed) *) (map->l_addr + dyn->d_un.d_ptr);
-	  while (1)
-	    {
-	      ElfW(Vernaux) *aux;
-	      aux = (ElfW(Vernaux) *) ((char *) ent + ent->vn_aux);
-	      while (1)
-		{
-		  ElfW(Half) ndx = aux->vna_other & 0x7fff;
-		  map->l_versions[ndx].hash = aux->vna_hash;
-		  map->l_versions[ndx].hidden = aux->vna_other & 0x8000;
-		  map->l_versions[ndx].name = &strtab[aux->vna_name];
-		  map->l_versions[ndx].filename = &strtab[ent->vn_file];
-
-		  if (aux->vna_next == 0)
-		    /* No more symbols.  */
-		    break;
-
-		  /* Advance to next symbol.  */
-		  aux = (ElfW(Vernaux) *) ((char *) aux + aux->vna_next);
-		}
-
-	      if (ent->vn_next == 0)
-		/* No more dependencies.  */
-		break;
-
-	      /* Advance to next dependency.  */
-	      ent = (ElfW(Verneed) *) ((char *) ent + ent->vn_next);
-	    }
-	}
-
-      /* And insert the defined versions.  */
-      if (def != NULL)
-	{
-	  ElfW(Verdef) *ent;
-	  ent = (ElfW(Verdef)  *) (map->l_addr + def->d_un.d_ptr);
-	  while (1)
-	    {
-	      ElfW(Verdaux) *aux;
-	      aux = (ElfW(Verdaux) *) ((char *) ent + ent->vd_aux);
-
-	      if ((ent->vd_flags & VER_FLG_BASE) == 0)
-		{
-		  /* The name of the base version should not be
-		     available for matching a versioned symbol.  */
-		  ElfW(Half) ndx = ent->vd_ndx & 0x7fff;
-		  map->l_versions[ndx].hash = ent->vd_hash;
-		  map->l_versions[ndx].name = &strtab[aux->vda_name];
-		  map->l_versions[ndx].filename = NULL;
-		}
-
-	      if (ent->vd_next == 0)
-		/* No more definitions.  */
-		break;
-
-	      ent = (ElfW(Verdef) *) ((char *) ent + ent->vd_next);
-	    }
-	}
-    }
-
-  return result;
-}
-
-
-int
-internal_function
-_dl_check_all_versions (struct link_map *map, int verbose, int trace_mode)
-{
-  struct link_map *l;
-  int result = 0;
-
-  for (l = map; l != NULL; l = l->l_next)
-    result |= ! l->l_faked && _dl_check_map_versions (l, verbose, trace_mode);
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/dl/dlfcn.h b/newlib/libc/sys/linux/dl/dlfcn.h
deleted file mode 100644
index 67ba73d5d..000000000
--- a/newlib/libc/sys/linux/dl/dlfcn.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* User functions for run-time dynamic loading.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef	_DLFCN_H
-#define	_DLFCN_H 1
-
-#include <features.h>
-
-/* Collect various system dependent definitions and declarations.  */
-#include <sys/dlfcn.h>
-
-
-/* If the first argument of `dlsym' or `dlvsym' is set to RTLD_NEXT
-   the run-time address of the symbol called NAME in the next shared
-   object is returned.  The "next" relation is defined by the order
-   the shared objects were loaded.  */
-# define RTLD_NEXT	((void *) -1l)
-
-/* If the first argument to `dlsym' or `dlvsym' is set to RTLD_DEFAULT
-   the run-time address of the symbol called NAME in the global scope
-   is returned.  */
-# define RTLD_DEFAULT	((void *) 0)
-
-
-__BEGIN_DECLS
-
-/* Open the shared object FILE and map it in; return a handle that can be
-   passed to `dlsym' to get symbol values from it.  */
-extern void *dlopen (__const char *__file, int __mode) __THROW;
-
-/* Unmap and close a shared object opened by `dlopen'.
-   The handle cannot be used again after calling `dlclose'.  */
-extern int dlclose (void *__handle) __THROW;
-
-/* Find the run-time address in the shared object HANDLE refers to
-   of the symbol called NAME.  */
-extern void *dlsym (void *__restrict __handle,
-		    __const char *__restrict __name) __THROW;
-
-/* Find the run-time address in the shared object HANDLE refers to
-   of the symbol called NAME with VERSION.  */
-extern void *dlvsym (void *__restrict __handle,
-		     __const char *__restrict __name,
-		     __const char *__restrict __version) __THROW;
-
-/* When any of the above functions fails, call this function
-   to return a string describing the error.  Each call resets
-   the error string so that a following call returns null.  */
-extern char *dlerror (void) __THROW;
-
-
-/* Structure containing information about object searched using
-   `dladdr'.  */
-typedef struct
-{
-  __const char *dli_fname;	/* File name of defining object.  */
-  void *dli_fbase;		/* Load address of that object.  */
-  __const char *dli_sname;	/* Name of nearest symbol.  */
-  void *dli_saddr;		/* Exact value of nearest symbol.  */
-} Dl_info;
-
-/* Fill in *INFO with the following information about ADDRESS.
-   Returns 0 iff no shared object's segments contain that address.  */
-extern int dladdr (__const void *__address, Dl_info *__info) __THROW;
-
-__END_DECLS
-
-#endif	/* dlfcn.h */
diff --git a/newlib/libc/sys/linux/dl/do-lookup.h b/newlib/libc/sys/linux/dl/do-lookup.h
deleted file mode 100644
index b9364b95d..000000000
--- a/newlib/libc/sys/linux/dl/do-lookup.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* Look up a symbol in the loaded objects.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#if VERSIONED
-# define FCT do_lookup_versioned
-# define ARG const struct r_found_version *const version,
-#else
-# define FCT do_lookup
-# define ARG
-#endif
-
-/* Inner part of the lookup functions.  We return a value > 0 if we
-   found the symbol, the value 0 if nothing is found and < 0 if
-   something bad happened.  */
-static inline int
-FCT (const char *undef_name, unsigned long int hash, const ElfW(Sym) *ref,
-     struct sym_val *result, struct r_scope_elem *scope, size_t i, ARG
-     struct link_map *skip, int type_class)
-{
-  struct link_map **list = scope->r_list;
-  size_t n = scope->r_nlist;
-  struct link_map *map;
-
-  do
-    {
-      const ElfW(Sym) *symtab;
-      const char *strtab;
-      const ElfW(Half) *verstab;
-      Elf_Symndx symidx;
-      const ElfW(Sym) *sym;
-#if ! VERSIONED
-      int num_versions = 0;
-      const ElfW(Sym) *versioned_sym = NULL;
-#endif
-
-      map = list[i];
-
-      /* Here come the extra test needed for `_dl_lookup_symbol_skip'.  */
-      if (skip != NULL && map == skip)
-	continue;
-
-      /* Don't search the executable when resolving a copy reloc.  */
-      if ((type_class & ELF_RTYPE_CLASS_COPY) && map->l_type == lt_executable)
-	continue;
-
-      /* Print some debugging info if wanted.  */
-      if (__builtin_expect (_dl_debug_mask & DL_DEBUG_SYMBOLS, 0))
-	_dl_debug_printf ("symbol=%s;  lookup in file=%s\n", undef_name,
-			  map->l_name[0] ? map->l_name : _dl_argv[0]);
-
-      symtab = (const void *) D_PTR (map, l_info[DT_SYMTAB]);
-      strtab = (const void *) D_PTR (map, l_info[DT_STRTAB]);
-      verstab = map->l_versyms;
-
-      /* Search the appropriate hash bucket in this object's symbol table
-	 for a definition for the same symbol name.  */
-      for (symidx = map->l_buckets[hash % map->l_nbuckets];
-	   symidx != STN_UNDEF;
-	   symidx = map->l_chain[symidx])
-	{
-	  sym = &symtab[symidx];
-
-	  assert (ELF_RTYPE_CLASS_PLT == 1);
-	  if (sym->st_value == 0 || /* No value.  */
-	      /* ((type_class & ELF_RTYPE_CLASS_PLT)
-		  && (sym->st_shndx == SHN_UNDEF)) */
-	      (type_class & (sym->st_shndx == SHN_UNDEF)))
-	    continue;
-
-	  if (ELFW(ST_TYPE) (sym->st_info) > STT_FUNC)
-	    /* Ignore all but STT_NOTYPE, STT_OBJECT and STT_FUNC entries
-	       since these are no code/data definitions.  */
-	    continue;
-
-	  if (sym != ref && strcmp (strtab + sym->st_name, undef_name))
-	    /* Not the symbol we are looking for.  */
-	    continue;
-
-#if VERSIONED
-	  if (__builtin_expect (verstab == NULL, 0))
-	    {
-	      /* We need a versioned symbol but haven't found any.  If
-		 this is the object which is referenced in the verneed
-		 entry it is a bug in the library since a symbol must
-		 not simply disappear.
-
-		 It would also be a bug in the object since it means that
-		 the list of required versions is incomplete and so the
-		 tests in dl-version.c haven't found a problem.*/
-	      assert (version->filename == NULL
-		      || ! _dl_name_match_p (version->filename, map));
-
-	      /* Otherwise we accept the symbol.  */
-	    }
-	  else
-	    {
-	      /* We can match the version information or use the
-		 default one if it is not hidden.  */
-	      ElfW(Half) ndx = verstab[symidx] & 0x7fff;
-	      if ((map->l_versions[ndx].hash != version->hash
-		   || strcmp (map->l_versions[ndx].name, version->name))
-		  && (version->hidden || map->l_versions[ndx].hash
-		      || (verstab[symidx] & 0x8000)))
-		/* It's not the version we want.  */
-		continue;
-	    }
-#else
-	  /* No specific version is selected.  When the object file
-	     also does not define a version we have a match.
-	     Otherwise we accept the default version, or in case there
-	     is only one version defined, this one version.  */
-	  if (verstab != NULL)
-	    {
-	      ElfW(Half) ndx = verstab[symidx] & 0x7fff;
-	      if (ndx > 2) /* map->l_versions[ndx].hash != 0) */
-		{
-		  /* Don't accept hidden symbols.  */
-		  if ((verstab[symidx] & 0x8000) == 0 && num_versions++ == 0)
-		    /* No version so far.  */
-		    versioned_sym = sym;
-		  continue;
-		}
-	    }
-#endif
-
-	  /* There cannot be another entry for this symbol so stop here.  */
-	  goto found_it;
-	}
-
-      /* If we have seen exactly one versioned symbol while we are
-	 looking for an unversioned symbol and the version is not the
-	 default version we still accept this symbol since there are
-	 no possible ambiguities.  */
-#if VERSIONED
-      sym = NULL;
-#else
-      sym = num_versions == 1 ? versioned_sym : NULL;
-#endif
-
-      if (sym != NULL)
-	{
-	found_it:
-	  switch (ELFW(ST_BIND) (sym->st_info))
-	    {
-	    case STB_WEAK:
-	      /* Weak definition.  Use this value if we don't find another.  */
-	      if (__builtin_expect (_dl_dynamic_weak, 0))
-		{
-		  if (! result->s)
-		    {
-		      result->s = sym;
-		      result->m = map;
-		    }
-		  break;
-		}
-	      /* FALLTHROUGH */
-	    case STB_GLOBAL:
-	      /* Global definition.  Just what we need.  */
-	      result->s = sym;
-	      result->m = map;
-	      return 1;
-	    default:
-	      /* Local symbols are ignored.  */
-	      break;
-	    }
-	}
-
-#if VERSIONED
-      /* If this current map is the one mentioned in the verneed entry
-	 and we have not found a weak entry, it is a bug.  */
-      if (symidx == STN_UNDEF && version->filename != NULL
-	  && __builtin_expect (_dl_name_match_p (version->filename, map), 0))
-	return -1;
-#endif
-    }
-  while (++i < n);
-
-  /* We have not found anything until now.  */
-  return 0;
-}
-
-#undef FCT
-#undef ARG
-#undef VERSIONED
diff --git a/newlib/libc/sys/linux/dl/do-rel.h b/newlib/libc/sys/linux/dl/do-rel.h
deleted file mode 100644
index 46202d704..000000000
--- a/newlib/libc/sys/linux/dl/do-rel.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* Do relocations for ELF dynamic linking.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file may be included twice, to define both
-   `elf_dynamic_do_rel' and `elf_dynamic_do_rela'.  */
-
-#include <machine/weakalias.h>
-
-#ifdef DO_RELA
-# define elf_dynamic_do_rel		elf_dynamic_do_rela
-# define RELCOUNT_IDX			VERSYMIDX (DT_RELACOUNT)
-# define Rel				Rela
-# define elf_machine_rel		elf_machine_rela
-# define elf_machine_rel_relative	elf_machine_rela_relative
-#else
-# define RELCOUNT_IDX			VERSYMIDX (DT_RELCOUNT)
-#endif
-
-#ifndef VERSYMIDX
-# define VERSYMIDX(sym)	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGIDX (sym))
-#endif
-
-/* Perform the relocations in MAP on the running program image as specified
-   by RELTAG, SZTAG.  If LAZY is nonzero, this is the first pass on PLT
-   relocations; they should be set up to call _dl_runtime_resolve, rather
-   than fully resolved now.  */
-
-static inline void
-elf_dynamic_do_rel (struct link_map *map,
-		    ElfW(Addr) reladdr, ElfW(Addr) relsize,
-		    int lazy)
-{
-  const ElfW(Rel) *r = (const void *) reladdr;
-  const ElfW(Rel) *end = (const void *) (reladdr + relsize);
-  ElfW(Addr) l_addr = map->l_addr;
-
-#ifndef RTLD_BOOTSTRAP
-  /* We never bind lazily during ld.so bootstrap.  Unfortunately gcc is
-     not clever enough to see through all the function calls to realize
-     that.  */
-  if (lazy)
-    {
-      /* Doing lazy PLT relocations; they need very little info.  */
-      for (; r < end; ++r)
-	elf_machine_lazy_rel (map, l_addr, r);
-    }
-  else
-#endif
-    {
-      const ElfW(Sym) *const symtab =
-	(const void *) D_PTR (map, l_info[DT_SYMTAB]);
-      ElfW(Word) nrelative = (map->l_info[RELCOUNT_IDX] == NULL
-			      ? 0 : map->l_info[RELCOUNT_IDX]->d_un.d_val);
-      const ElfW(Rel) *relative = r;
-      r = MIN (r + nrelative, end);
-
-#ifndef RTLD_BOOTSTRAP
-      /* This is defined in rtld.c, but nowhere in the static libc.a; make
-	 the reference weak so static programs can still link.  This
-	 declaration cannot be done when compiling rtld.c (i.e. #ifdef
-	 RTLD_BOOTSTRAP) because rtld.c contains the common defn for
-	 _dl_rtld_map, which is incompatible with a weak decl in the same
-	 file.  */
-      weak_extern (_dl_rtld_map);
-      if (map != &_dl_rtld_map) /* Already done in rtld itself.  */
-# ifndef DO_RELA
-	/* Rela platforms get the offset from r_addend and this must
-	   be copied in the relocation address.  Therefore we can skip
-	   the relative relocations only if this is for rel
-	   relocations.  */
-	if (l_addr != 0)
-# endif
-#endif
-	  for (; relative < r; ++relative)
-	    elf_machine_rel_relative (l_addr, relative,
-				      (void *) (l_addr + relative->r_offset));
-
-      if (map->l_info[VERSYMIDX (DT_VERSYM)])
-	{
-	  const ElfW(Half) *const version =
-	    (const void *) D_PTR (map, l_info[VERSYMIDX (DT_VERSYM)]);
-
-	  for (; r < end; ++r)
-	    {
-	      ElfW(Half) ndx = version[ELFW(R_SYM) (r->r_info)];
-	      elf_machine_rel (map, r, &symtab[ELFW(R_SYM) (r->r_info)],
-			       &map->l_versions[ndx],
-			       (void *) (l_addr + r->r_offset));
-	    }
-	}
-      else
-	for (; r < end; ++r)
-	  elf_machine_rel (map, r, &symtab[ELFW(R_SYM) (r->r_info)], NULL,
-			   (void *) (l_addr + r->r_offset));
-    }
-}
-
-#undef elf_dynamic_do_rel
-#undef Rel
-#undef elf_machine_rel
-#undef elf_machine_rel_relative
-#undef RELCOUNT_IDX
diff --git a/newlib/libc/sys/linux/dl/dynamic-link.h b/newlib/libc/sys/linux/dl/dynamic-link.h
deleted file mode 100644
index a63fded89..000000000
--- a/newlib/libc/sys/linux/dl/dynamic-link.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/* Inline functions for dynamic linking.
-   Copyright (C) 1995,96,97,98,99,2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <elf.h>
-#include <machine/dl-machine.h>
-#include <assert.h>
-
-#ifndef VERSYMIDX
-# define VERSYMIDX(sym)	(DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGIDX (sym))
-#endif
-
-
-/* Global read-only variable defined in rtld.c which is nonzero if we
-   shall give more warning messages.  */
-extern int _dl_verbose __attribute__ ((unused));
-
-
-/* Read the dynamic section at DYN and fill in INFO with indices DT_*.  */
-
-static inline void __attribute__ ((unused))
-elf_get_dynamic_info (struct link_map *l)
-{
-  ElfW(Dyn) *dyn = l->l_ld;
-  ElfW(Addr) l_addr;
-  ElfW(Dyn) **info;
-
-  if (! dyn)
-    return;
-
-  l_addr = l->l_addr;
-  info = l->l_info;
-
-  while (dyn->d_tag != DT_NULL)
-    {
-      if (dyn->d_tag < DT_NUM)
-	info[dyn->d_tag] = dyn;
-      else if (dyn->d_tag >= DT_LOPROC &&
-	       dyn->d_tag < DT_LOPROC + DT_THISPROCNUM)
-	info[dyn->d_tag - DT_LOPROC + DT_NUM] = dyn;
-      else if ((Elf32_Word) DT_VERSIONTAGIDX (dyn->d_tag) < DT_VERSIONTAGNUM)
-	info[VERSYMIDX (dyn->d_tag)] = dyn;
-      else if ((Elf32_Word) DT_EXTRATAGIDX (dyn->d_tag) < DT_EXTRANUM)
-	info[DT_EXTRATAGIDX (dyn->d_tag) + DT_NUM + DT_THISPROCNUM
-	     + DT_VERSIONTAGNUM] = dyn;
-      else
-	assert (! "bad dynamic tag");
-      ++dyn;
-    }
-#ifndef DL_RO_DYN_SECTION
-  if (info[DT_PLTGOT] != NULL)
-    info[DT_PLTGOT]->d_un.d_ptr += l_addr;
-  if (info[DT_STRTAB] != NULL)
-    info[DT_STRTAB]->d_un.d_ptr += l_addr;
-  if (info[DT_SYMTAB] != NULL)
-    info[DT_SYMTAB]->d_un.d_ptr += l_addr;
-# if ! ELF_MACHINE_NO_RELA
-  if (info[DT_RELA] != NULL)
-    {
-      assert (info[DT_RELAENT]->d_un.d_val == sizeof (ElfW(Rela)));
-      info[DT_RELA]->d_un.d_ptr += l_addr;
-    }
-# endif
-# if ! ELF_MACHINE_NO_REL
-  if (info[DT_REL] != NULL)
-    {
-      assert (info[DT_RELENT]->d_un.d_val == sizeof (ElfW(Rel)));
-      info[DT_REL]->d_un.d_ptr += l_addr;
-    }
-# endif
-#endif
-  if (info[DT_PLTREL] != NULL)
-    {
-# if ELF_MACHINE_NO_RELA
-      assert (info[DT_PLTREL]->d_un.d_val == DT_REL);
-# elif ELF_MACHINE_NO_REL
-      assert (info[DT_PLTREL]->d_un.d_val == DT_RELA);
-# else
-      assert (info[DT_PLTREL]->d_un.d_val == DT_REL
-	      || info[DT_PLTREL]->d_un.d_val == DT_RELA);
-# endif
-    }
-#ifndef DL_RO_DYN_SECTION
-  if (info[DT_JMPREL] != NULL)
-    info[DT_JMPREL]->d_un.d_ptr += l_addr;
-  if (info[VERSYMIDX (DT_VERSYM)] != NULL)
-    info[VERSYMIDX (DT_VERSYM)]->d_un.d_ptr += l_addr;
-#endif
-  if (info[DT_FLAGS] != NULL)
-    {
-      /* Flags are used.  Translate to the old form where available.
-	 Since these l_info entries are only tested for NULL pointers it
-	 is ok if they point to the DT_FLAGS entry.  */
-      ElfW(Word) flags = info[DT_FLAGS]->d_un.d_val;
-      if (flags & DF_SYMBOLIC)
-	info[DT_SYMBOLIC] = info[DT_FLAGS];
-      if (flags & DF_TEXTREL)
-	info[DT_TEXTREL] = info[DT_FLAGS];
-      if (flags & DF_BIND_NOW)
-	info[DT_BIND_NOW] = info[DT_FLAGS];
-    }
-  if (info[VERSYMIDX (DT_FLAGS_1)] != NULL)
-    l->l_flags_1 = info[VERSYMIDX (DT_FLAGS_1)]->d_un.d_val;
-  if (info[DT_RUNPATH] != NULL)
-    /* If both RUNPATH and RPATH are given, the latter is ignored.  */
-    info[DT_RPATH] = NULL;
-}
-
-#ifdef RESOLVE
-
-/* Get the definitions of `elf_dynamic_do_rel' and `elf_dynamic_do_rela'.
-   These functions are almost identical, so we use cpp magic to avoid
-   duplicating their code.  It cannot be done in a more general function
-   because we must be able to completely inline.  */
-
-/* On some machines, notably SPARC, DT_REL* includes DT_JMPREL in its
-   range.  Note that according to the ELF spec, this is completely legal!
-   But conditionally define things so that on machines we know this will
-   not happen we do something more optimal.  */
-
-# ifdef ELF_MACHINE_PLTREL_OVERLAP
-#  define _ELF_DYNAMIC_DO_RELOC(RELOC, reloc, map, do_lazy, test_rel) \
-  do {									      \
-    struct { ElfW(Addr) start, size; int lazy; } ranges[3];		      \
-    int ranges_index;							      \
-									      \
-    ranges[0].lazy = ranges[2].lazy = 0;				      \
-    ranges[1].lazy = 1;							      \
-    ranges[0].size = ranges[1].size = ranges[2].size = 0;		      \
-									      \
-    if ((map)->l_info[DT_##RELOC])					      \
-      {									      \
-	ranges[0].start = D_PTR ((map), l_info[DT_##RELOC]);		      \
-	ranges[0].size = (map)->l_info[DT_##RELOC##SZ]->d_un.d_val;	      \
-      }									      \
-									      \
-     if ((do_lazy)							      \
-	&& (map)->l_info[DT_PLTREL]					      \
-	&& (!test_rel || (map)->l_info[DT_PLTREL]->d_un.d_val == DT_##RELOC)) \
-      {									      \
-	ranges[1].start = D_PTR ((map), l_info[DT_JMPREL]);		      \
-	ranges[1].size = (map)->l_info[DT_PLTRELSZ]->d_un.d_val;	      \
-	ranges[2].start = ranges[1].start + ranges[1].size;		      \
-	ranges[2].size = ranges[0].start + ranges[0].size - ranges[2].start;  \
-	ranges[0].size = ranges[1].start - ranges[0].start;		      \
-      }									      \
-									      \
-    for (ranges_index = 0; ranges_index < 3; ++ranges_index)		      \
-      elf_dynamic_do_##reloc ((map),					      \
-			      ranges[ranges_index].start,		      \
-			      ranges[ranges_index].size,		      \
-			      ranges[ranges_index].lazy);		      \
-  } while (0)
-# else
-#  define _ELF_DYNAMIC_DO_RELOC(RELOC, reloc, map, do_lazy, test_rel) \
-  do {									      \
-    struct { ElfW(Addr) start, size; int lazy; } ranges[2];		      \
-    int ranges_index;							      \
-    ranges[0].lazy = 0;							      \
-    ranges[0].size = ranges[1].size = 0;				      \
-    ranges[0].start = 0;						      \
-									      \
-    if ((map)->l_info[DT_##RELOC])					      \
-      {									      \
-        ranges[0].start = D_PTR ((map), l_info[DT_##RELOC]);		      \
-        ranges[0].size = (map)->l_info[DT_##RELOC##SZ]->d_un.d_val;	      \
-      }									      \
-    if ((map)->l_info[DT_PLTREL]					      \
-	&& (!test_rel || (map)->l_info[DT_PLTREL]->d_un.d_val == DT_##RELOC)) \
-      {									      \
-	ElfW(Addr) start = D_PTR ((map), l_info[DT_JMPREL]);		      \
-									      \
-	if ((do_lazy)							      \
-	    /* This test does not only detect whether the relocation	      \
-	       sections are in the right order, it also checks whether	      \
-	       there is a DT_REL/DT_RELA section.  */			      \
-	    || ranges[0].start + ranges[0].size != start)		      \
-	  {								      \
-	    ranges[1].start = start;					      \
-	    ranges[1].size = (map)->l_info[DT_PLTRELSZ]->d_un.d_val;	      \
-	    ranges[1].lazy = (do_lazy);					      \
-	  }								      \
-	else								      \
-	  /* Combine processing the sections.  */			      \
-	  ranges[0].size += (map)->l_info[DT_PLTRELSZ]->d_un.d_val;	      \
-      }									      \
-									      \
-    for (ranges_index = 0; ranges_index < 2; ++ranges_index)		      \
-      elf_dynamic_do_##reloc ((map),					      \
-			      ranges[ranges_index].start,		      \
-			      ranges[ranges_index].size,		      \
-			      ranges[ranges_index].lazy);		      \
-  } while (0)
-# endif
-
-# if ELF_MACHINE_NO_REL || ELF_MACHINE_NO_RELA
-#  define _ELF_CHECK_REL 0
-# else
-#  define _ELF_CHECK_REL 1
-# endif
-
-# if ! ELF_MACHINE_NO_REL
-#  include "do-rel.h"
-#  define ELF_DYNAMIC_DO_REL(map, lazy) \
-  _ELF_DYNAMIC_DO_RELOC (REL, rel, map, lazy, _ELF_CHECK_REL)
-# else
-#  define ELF_DYNAMIC_DO_REL(map, lazy) /* Nothing to do.  */
-# endif
-
-# if ! ELF_MACHINE_NO_RELA
-#  define DO_RELA
-#  include "do-rel.h"
-#  define ELF_DYNAMIC_DO_RELA(map, lazy) \
-  _ELF_DYNAMIC_DO_RELOC (RELA, rela, map, lazy, _ELF_CHECK_REL)
-# else
-#  define ELF_DYNAMIC_DO_RELA(map, lazy) /* Nothing to do.  */
-# endif
-
-/* This can't just be an inline function because GCC is too dumb
-   to inline functions containing inlines themselves.  */
-# define ELF_DYNAMIC_RELOCATE(map, lazy, consider_profile) \
-  do {									      \
-    int edr_lazy = elf_machine_runtime_setup ((map), (lazy),		      \
-					      (consider_profile));	      \
-    ELF_DYNAMIC_DO_REL ((map), edr_lazy);				      \
-    ELF_DYNAMIC_DO_RELA ((map), edr_lazy);				      \
-  } while (0)
-
-#endif
diff --git a/newlib/libc/sys/linux/dl/kernel-features.h b/newlib/libc/sys/linux/dl/kernel-features.h
deleted file mode 100644
index 562a6c765..000000000
--- a/newlib/libc/sys/linux/dl/kernel-features.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* Set flags signalling availability of kernel features based on given
-   kernel version number.
-   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file must not contain any C code.  At least it must be protected
-   to allow using the file also in assembler files.  */
-
-#ifndef __LINUX_KERNEL_VERSION
-/* We assume the worst; all kernels should be supported.  */
-# define __LINUX_KERNEL_VERSION	0
-#endif
-
-/* We assume for __LINUX_KERNEL_VERSION the same encoding used in
-   linux/version.h.  I.e., the major, minor, and subminor all get a
-   byte with the major number being in the highest byte.  This means
-   we can do numeric comparisons.
-
-   In the following we will define certain symbols depending on
-   whether the describes kernel feature is available in the kernel
-   version given by __LINUX_KERNEL_VERSION.  We are not always exactly
-   recording the correct versions in which the features were
-   introduced.  If somebody cares these values can afterwards be
-   corrected.  Most of the numbers here are set corresponding to
-   2.2.0.  */
-
-/* `getcwd' system call.  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_GETCWD_SYSCALL	1
-#endif
-
-/* Real-time signal became usable in 2.1.70.  */
-#if __LINUX_KERNEL_VERSION >= 131398
-# define __ASSUME_REALTIME_SIGNALS	1
-#endif
-
-/* When were the `pread'/`pwrite' syscalls introduced?  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_PREAD_SYSCALL		1
-# define __ASSUME_PWRITE_SYSCALL	1
-#endif
-
-/* When was `poll' introduced?  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_POLL_SYSCALL		1
-#endif
-
-/* The `lchown' syscall was introduced in 2.1.80.  */
-#if __LINUX_KERNEL_VERSION >= 131408
-# define __ASSUME_LCHOWN_SYSCALL	1
-#endif
-
-/* When did the `setresuid' sysall became available?  */
-#if __LINUX_KERNEL_VERSION >= 131584 && !defined __sparc__
-# define __ASSUME_SETRESUID_SYSCALL	1
-#endif
-
-/* The SIOCGIFNAME ioctl is available starting with 2.1.50.  */
-#if __LINUX_KERNEL_VERSION >= 131408
-# define __ASSUME_SIOCGIFNAME		1
-#endif
-
-/* On x86 another `getrlimit' syscall was added in 2.3.25.  */
-#if __LINUX_KERNEL_VERSION >= 131865 && defined __i386__
-# define __ASSUME_NEW_GETRLIMIT_SYSCALL	1
-#endif
-
-/* On x86 the truncate64/ftruncate64 syscalls were introduced in 2.3.31.  */
-#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-#endif
-
-/* On x86 the mmap2 syscall was introduced in 2.3.31.  */
-#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__
-# define __ASSUME_MMAP2_SYSCALL	1
-#endif
-
-/* On x86 the stat64/lstat64/fstat64 syscalls were introduced in 2.3.34.  */
-#if __LINUX_KERNEL_VERSION >= 131874 && defined __i386__
-# define __ASSUME_STAT64_SYSCALL	1
-#endif
-
-/* On sparc and ARM the truncate64/ftruncate64/mmap2/stat64/lstat64/fstat64
-   syscalls were introduced in 2.3.35.  */
-#if __LINUX_KERNEL_VERSION >= 131875 && (defined __sparc__ || defined __arm__)
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_MMAP2_SYSCALL		1
-# define __ASSUME_STAT64_SYSCALL	1
-#endif
-
-/* I know for sure that these are in 2.3.35 on powerpc.  */
-#if __LINUX_KERNEL_VERSION >= 131875 && defined __powerpc__
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_STAT64_SYSCALL	1
-# define __ASSUME_NEW_GETRLIMIT_SYSCALL	1
-#endif
-
-/* Linux 2.3.39 introduced 32bit UID/GIDs and IPC64.  Some platforms had 32
-   bit type all along.  */
-#if __LINUX_KERNEL_VERSION >= 131879 || defined __powerpc__ || defined __mips__
-# define __ASSUME_32BITUIDS		1
-# ifndef __powerpc__
-#  define __ASSUME_IPC64		1
-# endif
-# ifdef __sparc__
-#  define __ASSUME_SETRESUID_SYSCALL	1
-# endif
-#endif
-
-/* Linux 2.4.0 on PPC introduced a correct IPC64.  */
-#if __LINUX_KERNEL_VERSION >= 132096 && defined __powerpc__
-# define __ASSUME_IPC64			1
-#endif
-
-/* We can use the LDTs for threading with Linux 2.3.99 and newer.  */
-#if __LINUX_KERNEL_VERSION >= 131939
-# define __ASSUME_LDT_WORKS		1
-#endif
-
-/* The changed st_ino field appeared in 2.4.0-test6.  But we cannot
-   distinguish this version from other 2.4.0 releases.  Therefore play
-   save and assume it available is for 2.4.1 and up.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_ST_INO_64_BIT		1
-#endif
-
-/* To support locking of large files a new fcntl() syscall was introduced
-   in 2.4.0-test7.  We test for 2.4.1 for the earliest version we know
-   the syscall is available.  */
-#if __LINUX_KERNEL_VERSION >= 132097 && (defined __i386__ || defined __sparc__)
-# define __ASSUME_FCNTL64		1
-#endif
-
-/* Arm got fcntl64 in 2.4.4, PowerPC and SH have it also in 2.4.4 (I
-   don't know when it got introduced).  */
-#if __LINUX_KERNEL_VERSION >= 132100 \
-    && (defined __arm__ || defined __powerpc__ || defined __sh__)
-# define __ASSUME_FCNTL64		1
-#endif
-
-/* The getdents64 syscall was introduced in 2.4.0-test7.  We test for
-   2.4.1 for the earliest version we know the syscall is available.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_GETDENTS64_SYSCALL	1
-#endif
-
-/* When did O_DIRECTORY became available?  Early in 2.3 but when?
-   Be safe, use 2.3.99.  */
-#if __LINUX_KERNEL_VERSION >= 131939
-# define __ASSUME_O_DIRECTORY		1
-#endif
-
-/* Starting with one of the 2.4.0 pre-releases the Linux kernel passes
-   up the page size information.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_AT_PAGESIZE		1
-#endif
-
-/* Starting with 2.4.5 kernels PPC passes the AUXV in the standard way
-   and the mmap2 syscall made it into the official kernel.  */
-#if __LINUX_KERNEL_VERSION >= (132096+5) && defined __powerpc__
-# define __ASSUME_STD_AUXV		1
-# define __ASSUME_MMAP2_SYSCALL		1
-#endif
-
-/* There are an infinite number of PA-RISC kernel versions numbered
-   2.4.0.  But they've not really been released as such.  We require
-   and expect the final version here.  */
-#ifdef __hppa__
-# define __ASSUME_32BITUIDS		1
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_MMAP2_SYSCALL		1
-# define __ASSUME_STAT64_SYSCALL	1
-# define __ASSUME_IPC64			1
-# define __ASSUME_ST_INO_64_BIT		1
-# define __ASSUME_FCNTL64		1
-# define __ASSUME_GETDENTS64_SYSCALL	1
-#endif
diff --git a/newlib/libc/sys/linux/dl/ldsodefs.h b/newlib/libc/sys/linux/dl/ldsodefs.h
deleted file mode 100644
index f24e1136b..000000000
--- a/newlib/libc/sys/linux/dl/ldsodefs.h
+++ /dev/null
@@ -1,535 +0,0 @@
-/* Run-time dynamic linker data structures for loaded ELF shared objects.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef	_LDSODEFS_H
-#define	_LDSODEFS_H	1
-
-#include <features.h>
-
-#define __need_size_t
-#define __need_NULL
-#include <stddef.h>
-#include <string.h>
-
-#include <elf.h>
-#include <dlfcn.h>
-#include <link.h>
-#include <dl-lookupcfg.h>
-#include <bits/libc-lock.h>
-
-__BEGIN_DECLS
-
-/* We use this macro to refer to ELF types independent of the native wordsize.
-   `ElfW(TYPE)' is used in place of `Elf32_TYPE' or `Elf64_TYPE'.  */
-#define ELFW(type)	_ElfW (ELF, __ELF_NATIVE_CLASS, type)
-
-#define internal_function 
-/* All references to the value of l_info[DT_PLTGOT],
-  l_info[DT_STRTAB], l_info[DT_SYMTAB], l_info[DT_RELA],
-  l_info[DT_REL], l_info[DT_JMPREL], and l_info[VERSYMIDX (DT_VERSYM)]
-  have to be accessed via the D_PTR macro.  The macro is needed since for
-  most architectures the entry is already relocated - but for some not
-  and we need to relocate at access time.  */
-#ifdef DL_RO_DYN_SECTION
-# define D_PTR(map,i) (map->i->d_un.d_ptr + map->l_addr)
-#else
-# define D_PTR(map,i) map->i->d_un.d_ptr
-#endif
-
-/* On some platforms more information than just the address of the symbol
-   is needed from the lookup functions.  In this case we return the whole
-   link map.  */
-#ifdef DL_LOOKUP_RETURNS_MAP
-typedef struct link_map *lookup_t;
-# define LOOKUP_VALUE(map) map
-# define LOOKUP_VALUE_ADDRESS(map) (map ? map->l_addr : 0)
-#else
-typedef ElfW(Addr) lookup_t;
-# define LOOKUP_VALUE(map) map->l_addr
-# define LOOKUP_VALUE_ADDRESS(address) address
-#endif
-
-/* on some architectures a pointer to a function is not just a pointer
-   to the actual code of the function but rather an architecture
-   specific descriptor. */
-#ifndef ELF_FUNCTION_PTR_IS_SPECIAL
-# define DL_SYMBOL_ADDRESS(map, ref) \
- (void *) (LOOKUP_VALUE_ADDRESS (map) + ref->st_value)
-# define DL_LOOKUP_ADDRESS(addr) ((ElfW(Addr)) (addr))
-# define DL_DT_INIT_ADDRESS(map, start) (start)
-# define DL_DT_FINI_ADDRESS(map, start) (start)
-#endif
-
-/* Unmap a loaded object, called by _dl_close (). */
-#ifndef DL_UNMAP_IS_SPECIAL
-# define DL_UNMAP(map) \
- __munmap ((void *) (map)->l_map_start,					      \
-	   (map)->l_map_end - (map)->l_map_start)
-#endif
-
-/* By default we do not need special support to initialize DSOs loaded
-   by statically linked binaries.  */
-#ifndef DL_STATIC_INIT
-# define DL_STATIC_INIT(map)
-#endif
-
-/* Reloc type classes as returned by elf_machine_type_class().
-   ELF_RTYPE_CLASS_PLT means this reloc should not be satisfied by
-   some PLT symbol, ELF_RTYPE_CLASS_COPY means this reloc should not be
-   satisfied by any symbol in the executable.  */
-#define ELF_RTYPE_CLASS_PLT 1
-#define ELF_RTYPE_CLASS_COPY 2
-
-/* ELF uses the PF_x macros to specify the segment permissions, mmap
-   uses PROT_xxx.  In most cases the three macros have the values 1, 2,
-   and 3 but not in a matching order.  The following macros allows
-   converting from the PF_x values to PROT_xxx values.  */
-#define PF_TO_PROT \
-  ((PROT_READ << (PF_R * 4))						      \
-   | (PROT_WRITE << (PF_W * 4))						      \
-   | (PROT_EXEC << (PF_X * 4))						      \
-   | ((PROT_READ | PROT_WRITE) << ((PF_R | PF_W) * 4))			      \
-   | ((PROT_READ | PROT_EXEC) << ((PF_R | PF_X) * 4))			      \
-   | ((PROT_WRITE | PROT_EXEC) << (PF_W | PF_X) * 4)			      \
-   | ((PROT_READ | PROT_WRITE | PROT_EXEC) << ((PF_R | PF_W | PF_X) * 4)))
-
-
-/* For the version handling we need an array with only names and their
-   hash values.  */
-struct r_found_version
-  {
-    const char *name;
-    ElfW(Word) hash;
-
-    int hidden;
-    const char *filename;
-  };
-
-/* We want to cache information about the searches for shared objects.  */
-
-enum r_dir_status { unknown, nonexisting, existing };
-
-struct r_search_path_elem
-  {
-    /* This link is only used in the `all_dirs' member of `r_search_path'.  */
-    struct r_search_path_elem *next;
-
-    /* Strings saying where the definition came from.  */
-    const char *what;
-    const char *where;
-
-    /* Basename for this search path element.  The string must end with
-       a slash character.  */
-    const char *dirname;
-    size_t dirnamelen;
-
-    enum r_dir_status status[0];
-  };
-
-struct r_strlenpair
-  {
-    const char *str;
-    size_t len;
-  };
-
-
-/* A data structure for a simple single linked list of strings.  */
-struct libname_list
-  {
-    const char *name;		/* Name requested (before search).  */
-    struct libname_list *next;	/* Link to next name for this object.  */
-    int dont_free;		/* Flag whether this element should be freed
-				   if the object is not entirely unloaded.  */
-  };
-
-
-/* Test whether given NAME matches any of the names of the given object.  */
-static __inline int
-__attribute__ ((unused))
-_dl_name_match_p (const char *__name, struct link_map *__map)
-{
-  int __found = strcmp (__name, __map->l_name) == 0;
-  struct libname_list *__runp = __map->l_libname;
-
-  while (! __found && __runp != NULL)
-    if (strcmp (__name, __runp->name) == 0)
-      __found = 1;
-    else
-      __runp = __runp->next;
-
-  return __found;
-}
-
-/* Function used as argument for `_dl_receive_error' function.  The
-   arguments are the error code, error string, and the objname the
-   error occurred in.  */
-typedef void (*receiver_fct) (int, const char *, const char *);
-
-/* Internal functions of the run-time dynamic linker.
-   These can be accessed if you link again the dynamic linker
-   as a shared library, as in `-lld' or `/lib/ld.so' explicitly;
-   but are not normally of interest to user programs.
-
-   The `-ldl' library functions in <dlfcn.h> provide a simple
-   user interface to run-time dynamic linking.  */
-
-
-/* Parameters passed to the dynamic linker.  */
-extern char **_dl_argv;
-
-/* Cached value of `getpagesize ()'.  */
-extern size_t _dl_pagesize;
-
-/* OS version.  */
-extern unsigned int _dl_osversion;
-
-/* File descriptor referring to the zero-fill device.  */
-extern int _dl_zerofd;
-
-/* Name of the shared object to be profiled (if any).  */
-extern const char *_dl_profile;
-/* Map of shared object to be profiled.  */
-extern struct link_map *_dl_profile_map;
-/* Filename of the output file.  */
-extern const char *_dl_profile_output;
-
-/* If nonzero the appropriate debug information is printed.  */
-extern int _dl_debug_mask;
-#define DL_DEBUG_LIBS	    (1 << 0)
-#define DL_DEBUG_IMPCALLS   (1 << 1)
-#define DL_DEBUG_BINDINGS   (1 << 2)
-#define DL_DEBUG_SYMBOLS    (1 << 3)
-#define DL_DEBUG_VERSIONS   (1 << 4)
-#define DL_DEBUG_RELOC      (1 << 5)
-#define DL_DEBUG_FILES      (1 << 6)
-#define DL_DEBUG_STATISTICS (1 << 7)
-/* This one is used only internally.  */
-#define DL_DEBUG_HELP       (1 << 8)
-
-/* Expect cache ID.  */
-extern int _dl_correct_cache_id;
-
-/* Mask for hardware capabilities that are available.  */
-extern unsigned long int _dl_hwcap;
-
-/* Mask for important hardware capabilities we honour. */
-extern unsigned long int _dl_hwcap_mask;
-
-/* File descriptor to write debug messages to.  */
-extern int _dl_debug_fd;
-
-/* Names of shared object for which the RPATH should be ignored.  */
-extern const char *_dl_inhibit_rpath;
-
-/* Nonzero if references should be treated as weak during runtime linking.  */
-extern int _dl_dynamic_weak;
-
-/* The array with message we print as a last resort.  */
-extern const char _dl_out_of_memory[];
-
-/* Nonzero if runtime lookups should not update the .got/.plt.  */
-extern int _dl_bind_not;
-
-/* List of search directories.  */
-extern struct r_search_path_elem *_dl_all_dirs;
-extern struct r_search_path_elem *_dl_init_all_dirs;
-
-/* OS-dependent function to open the zero-fill device.  */
-extern int _dl_sysdep_open_zero_fill (void); /* dl-sysdep.c */
-
-
-/* During the program run we must not modify the global data of
-   loaded shared object simultanously in two threads.  Therefore we
-   protect `_dl_open' and `_dl_close' in dl-close.c.
-
-   This must be a recursive lock since the initializer function of
-   the loaded object might as well require a call to this function.
-   At this time it is not anymore a problem to modify the tables.  */
-__libc_lock_define_recursive (extern, _dl_load_lock)
-
-
-/* Write message on the debug file descriptor.  The parameters are
-   interpreted as for a `printf' call.  All the lines start with a
-   tag showing the PID.  */
-extern void _dl_debug_printf (const char *fmt, ...)
-     __attribute__ ((__format__ (__printf__, 1, 2)));
-
-/* Write message on the debug file descriptor.  The parameters are
-   interpreted as for a `printf' call.  All the lines buf the first
-   start with a tag showing the PID.  */
-extern void _dl_debug_printf_c (const char *fmt, ...)
-     __attribute__ ((__format__ (__printf__, 1, 2)));
-
-
-/* Write a message on the specified descriptor FD.  The parameters are
-   interpreted as for a `printf' call.  */
-extern void _dl_dprintf (int fd, const char *fmt, ...)
-     __attribute__ ((__format__ (__printf__, 2, 3)));
-
-/* Write a message on the specified descriptor standard output.  The
-   parameters are interpreted as for a `printf' call.  */
-#define _dl_printf(fmt, args...) \
-  _dl_dprintf (STDOUT_FILENO, fmt, ##args)
-
-/* Write a message on the specified descriptor standard error.  The
-   parameters are interpreted as for a `printf' call.  */
-#define _dl_error_printf(fmt, args...) \
-  _dl_dprintf (STDERR_FILENO, fmt, ##args)
-
-/* Write a message on the specified descriptor standard error and exit
-   the program.  The parameters are interpreted as for a `printf' call.  */
-#define _dl_fatal_printf(fmt, args...) \
-  do									      \
-    {									      \
-      _dl_dprintf (STDERR_FILENO, fmt, ##args);				      \
-      _exit (127);							      \
-    }									      \
-  while (1)
-
-
-/* This function is called by all the internal dynamic linker functions
-   when they encounter an error.  ERRCODE is either an `errno' code or
-   zero; OBJECT is the name of the problematical shared object, or null if
-   it is a general problem; ERRSTRING is a string describing the specific
-   problem.  */
-extern void _dl_signal_error (int errcode, const char *object,
-			      const char *occurred, const char *errstring)
-     internal_function
-     __attribute__ ((__noreturn__));
-
-/* Like _dl_signal_error, but may return when called in the context of
-   _dl_receive_error.  */
-extern void _dl_signal_cerror (int errcode, const char *object,
-			       const char *occation, const char *errstring)
-     internal_function;
-
-/* Call OPERATE, receiving errors from `dl_signal_cerror'.  Unlike
-   `_dl_catch_error' the operation is resumed after the OPERATE
-   function returns.
-   ARGS is passed as argument to OPERATE.  */
-extern void _dl_receive_error (receiver_fct fct, void (*operate) (void *),
-			       void *args)
-     internal_function;
-
-
-/* Open the shared object NAME and map in its segments.
-   LOADER's DT_RPATH is used in searching for NAME.
-   If the object is already opened, returns its existing map.
-   For preloaded shared objects PRELOADED is set to a non-zero
-   value to allow additional security checks.  */
-extern struct link_map *_dl_map_object (struct link_map *loader,
-					const char *name, int preloaded,
-					int type, int trace_mode, int mode)
-     internal_function;
-
-/* Call _dl_map_object on the dependencies of MAP, and set up
-   MAP->l_searchlist.  PRELOADS points to a vector of NPRELOADS previously
-   loaded objects that will be inserted into MAP->l_searchlist after MAP
-   but before its dependencies.  */
-extern void _dl_map_object_deps (struct link_map *map,
-				 struct link_map **preloads,
-				 unsigned int npreloads, int trace_mode)
-     internal_function;
-
-/* Cache the locations of MAP's hash table.  */
-extern void _dl_setup_hash (struct link_map *map) internal_function;
-
-
-/* Search loaded objects' symbol tables for a definition of the symbol
-   referred to by UNDEF.  *SYM is the symbol table entry containing the
-   reference; it is replaced with the defining symbol, and the base load
-   address of the defining object is returned.  SYMBOL_SCOPE is a
-   null-terminated list of object scopes to search; each object's
-   l_searchlist (i.e. the segment of the dependency tree starting at that
-   object) is searched in turn.  REFERENCE_NAME should name the object
-   containing the reference; it is used in error messages.
-   TYPE_CLASS describes the type of symbol we are looking for.  */
-extern lookup_t _dl_lookup_symbol (const char *undef,
-				   struct link_map *undef_map,
-				   const ElfW(Sym) **sym,
-				   struct r_scope_elem *symbol_scope[],
-				   int type_class, int explicit)
-     internal_function;
-
-/* Lookup versioned symbol.  */
-extern lookup_t _dl_lookup_versioned_symbol (const char *undef,
-					     struct link_map *undef_map,
-					     const ElfW(Sym) **sym,
-					     struct r_scope_elem *symbol_scope[],
-					     const struct r_found_version *version,
-					     int type_class, int explicit)
-     internal_function;
-
-/* For handling RTLD_NEXT we must be able to skip shared objects.  */
-extern lookup_t _dl_lookup_symbol_skip (const char *undef,
-					struct link_map *undef_map,
-					const ElfW(Sym) **sym,
-					struct r_scope_elem *symbol_scope[],
-					struct link_map *skip_this)
-     internal_function;
-
-/* For handling RTLD_NEXT with versioned symbols we must be able to
-   skip shared objects.  */
-extern lookup_t _dl_lookup_versioned_symbol_skip (const char *undef,
-						  struct link_map *undef_map,
-						  const ElfW(Sym) **sym,
-						  struct r_scope_elem *symbol_scope[],
-						  const struct r_found_version *version,
-						  struct link_map *skip_this)
-     internal_function;
-
-/* Look up symbol NAME in MAP's scope and return its run-time address.  */
-extern ElfW(Addr) _dl_symbol_value (struct link_map *map, const char *name)
-     internal_function;
-
-
-/* Structure describing the dynamic linker itself.  */
-extern struct link_map _dl_rtld_map;
-/* And a pointer to the map for the main map.  */
-extern struct link_map *_dl_loaded;
-/* Number of object in the _dl_loaded list.  */
-extern unsigned int _dl_nloaded;
-/* Array representing global scope.  */
-extern struct r_scope_elem *_dl_global_scope[2];
-/* Direct pointer to the searchlist of the main object.  */
-extern struct r_scope_elem *_dl_main_searchlist;
-/* Copy of the content of `_dl_main_searchlist'.  */
-extern struct r_scope_elem _dl_initial_searchlist;
-/* This is zero at program start to signal that the global scope map is
-   allocated by rtld.  Later it keeps the size of the map.  It might be
-   reset if in _dl_close if the last global object is removed.  */
-extern size_t _dl_global_scope_alloc;
-
-/* Allocate a `struct link_map' for a new object being loaded,
-   and enter it into the _dl_main_map list.  */
-extern struct link_map *_dl_new_object (char *realname, const char *libname,
-					int type, struct link_map *loader)
-     internal_function;
-
-/* Relocate the given object (if it hasn't already been).
-   SCOPE is passed to _dl_lookup_symbol in symbol lookups.
-   If LAZY is nonzero, don't relocate its PLT.  */
-extern void _dl_relocate_object (struct link_map *map,
-				 struct r_scope_elem *scope[],
-				 int lazy, int consider_profiling);
-
-/* Call _dl_signal_error with a message about an unhandled reloc type.
-   TYPE is the result of ELFW(R_TYPE) (r_info), i.e. an R_<CPU>_* value.
-   PLT is nonzero if this was a PLT reloc; it just affects the message.  */
-extern void _dl_reloc_bad_type (struct link_map *map,
-				unsigned int type, int plt)
-     internal_function __attribute__ ((__noreturn__));
-
-/* Check the version dependencies of all objects available through
-   MAP.  If VERBOSE print some more diagnostics.  */
-extern int _dl_check_all_versions (struct link_map *map, int verbose,
-				   int trace_mode)
-     internal_function;
-
-/* Check the version dependencies for MAP.  If VERBOSE print some more
-   diagnostics.  */
-extern int _dl_check_map_versions (struct link_map *map, int verbose,
-				   int trace_mode)
-     internal_function;
-
-/* Initialize the object in SCOPE by calling the constructors with
-   ARGC, ARGV, and ENV as the parameters.  */
-extern void _dl_init (struct link_map *main_map, int argc, char **argv,
-		      char **env) internal_function;
-
-/* Call the finalizer functions of all shared objects whose
-   initializer functions have completed.  */
-extern void _dl_fini (void) internal_function;
-
-/* The dynamic linker calls this function before and having changing
-   any shared object mappings.  The `r_state' member of `struct r_debug'
-   says what change is taking place.  This function's address is
-   the value of the `r_brk' member.  */
-extern void _dl_debug_state (void);
-
-/* Initialize `struct r_debug' if it has not already been done.  The
-   argument is the run-time load address of the dynamic linker, to be put
-   in the `r_ldbase' member.  Returns the address of the structure.  */
-extern struct r_debug *_dl_debug_initialize (ElfW(Addr) ldbase)
-     internal_function;
-
-/* Initialize the basic data structure for the search paths.  */
-extern void _dl_init_paths (const char *library_path) internal_function;
-
-/* Gather the information needed to install the profiling tables and start
-   the timers.  */
-extern void _dl_start_profile (struct link_map *map, const char *output_dir)
-     internal_function;
-
-/* The actual functions used to keep book on the calls.  */
-extern void _dl_mcount (ElfW(Addr) frompc, ElfW(Addr) selfpc);
-
-/* This function is simply a wrapper around the _dl_mcount function
-   which does not require a FROMPC parameter since this is the
-   calling function.  */
-extern void _dl_mcount_wrapper (void *selfpc);
-
-/* Show the members of the auxiliary array passed up from the kernel.  */
-extern void _dl_show_auxv (void) internal_function;
-
-/* Return all environment variables starting with `LD_', one after the
-   other.  */
-extern char *_dl_next_ld_env_entry (char ***position) internal_function;
-
-/* Return an array with the names of the important hardware capabilities.  */
-extern const struct r_strlenpair *_dl_important_hwcaps (const char *platform,
-							size_t paltform_len,
-							size_t *sz,
-							size_t *max_capstrlen)
-     internal_function;
-
-/* Look up NAME in ld.so.cache and return the file name stored there,
-   or null if none is found.  */
-extern const char *_dl_load_cache_lookup (const char *name)
-     internal_function;
-
-/* If the system does not support MAP_COPY we cannot leave the file open
-   all the time since this would create problems when the file is replaced.
-   Therefore we provide this function to close the file and open it again
-   once needed.  */
-extern void _dl_unload_cache (void);
-
-/* System-dependent function to read a file's whole contents in the
-   most convenient manner available.  *SIZEP gets the size of the
-   file.  On error MAP_FAILED is returned.  */
-extern void *_dl_sysdep_read_whole_file (const char *file, size_t *sizep,
-					 int prot)
-     internal_function;
-
-/* System-specific function to do initial startup for the dynamic linker.
-   After this, file access calls and getenv must work.  This is responsible
-   for setting __libc_enable_secure if we need to be secure (e.g. setuid),
-   and for setting _dl_argc and _dl_argv, and then calling _dl_main.  */
-extern ElfW(Addr) _dl_sysdep_start (void **start_argptr,
-				    void (*dl_main) (const ElfW(Phdr) *phdr,
-						     ElfW(Word) phnum,
-						     ElfW(Addr) *user_entry));
-
-extern void _dl_sysdep_start_cleanup (void)
-     internal_function;
-
-
-__END_DECLS
-
-#endif /* ldsodefs.h */
diff --git a/newlib/libc/sys/linux/dl/libintl.h b/newlib/libc/sys/linux/dl/libintl.h
deleted file mode 100644
index 839210dea..000000000
--- a/newlib/libc/sys/linux/dl/libintl.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#define N_(x) x
-
diff --git a/newlib/libc/sys/linux/dl/trusted-dirs.h b/newlib/libc/sys/linux/dl/trusted-dirs.h
deleted file mode 100644
index 103d6e6bb..000000000
--- a/newlib/libc/sys/linux/dl/trusted-dirs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define SYSTEM_DIRS \
-  "/usr/local/lib/"
-
-#define SYSTEM_DIRS_LEN \
-  15
-
-#define SYSTEM_DIRS_MAX_LEN	15
diff --git a/newlib/libc/sys/linux/dl/unsecvars.h b/newlib/libc/sys/linux/dl/unsecvars.h
deleted file mode 100644
index efb951595..000000000
--- a/newlib/libc/sys/linux/dl/unsecvars.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Environment variable to be removed for SUID programs.  The names are
-   all stuffed in a single string which means they have to be terminated
-   with a '\0' explicitly.  */
-#define UNSECURE_ENVVARS \
-  "LD_PRELOAD\0"							      \
-  "LD_LIBRARY_PATH\0"							      \
-  "LD_ORIGIN_PATH\0"							      \
-  "LD_DEBUG_OUTPUT\0"							      \
-  "LD_PROFILE\0"							      \
-  "GCONV_PATH\0"							      \
-  "HOSTALIASES\0"							      \
-  "LOCALDOMAIN\0"							      \
-  "LOCPATH\0"								      \
-  "MALLOC_TRACE\0"							      \
-  "NLSPATH\0"								      \
-  "RESOLV_HOST_CONF\0"							      \
-  "RES_OPTIONS\0"							      \
-  "TMPDIR\0"								      \
-  "TZDIR\0"
diff --git a/newlib/libc/sys/linux/fclean.c b/newlib/libc/sys/linux/fclean.c
deleted file mode 100644
index 2fb11fc83..000000000
--- a/newlib/libc/sys/linux/fclean.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-
-int
-fclean (FILE *fp)
-{
-  return fflush (fp);
-}
diff --git a/newlib/libc/sys/linux/flockfile.c b/newlib/libc/sys/linux/flockfile.c
deleted file mode 100644
index 4a6cbc461..000000000
--- a/newlib/libc/sys/linux/flockfile.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* stub to allow libpthread to override */
-
-#include <stdio.h>
-#include <machine/weakalias.h>
-
-void __libc_flockfile (FILE *fp)
-{
-}
-weak_alias(__libc_flockfile,flockfile)
diff --git a/newlib/libc/sys/linux/fpathconf.c b/newlib/libc/sys/linux/fpathconf.c
deleted file mode 100644
index 6d006a11b..000000000
--- a/newlib/libc/sys/linux/fpathconf.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* Linux specific extensions to fpathconf.
-   Copyright (C) 1991,95,96,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib July 19, 2002 by Jeff Johnston */
-
-#include <errno.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <limits.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
-#include <sys/statvfs.h>
-#include <machine/weakalias.h>
-#include "linux_fsinfo.h"
-
-/* The Linux kernel header mentioned this as a kind of generic value.  */
-#define LINUX_LINK_MAX	127
-
-static long int posix_fpathconf (int fd, int name);
-
-/* Get file-specific information about descriptor FD.  */
-long int
-__fpathconf (fd, name)
-     int fd;
-     int name;
-{
-  if (name == _PC_LINK_MAX)
-    {
-      struct statfs fsbuf;
-
-      /* Determine the filesystem type.  */
-      if (__fstatfs (fd, &fsbuf) < 0)
-	{
-	  if (errno == ENOSYS)
-	    /* not possible, return the default value.  */
-	    return LINUX_LINK_MAX;
-
-	  /* Some error occured.  */
-          return -1;
-	}
-
-      switch (fsbuf.f_type)
-	{
-	case EXT2_SUPER_MAGIC:
-	  return EXT2_LINK_MAX;
-
-	case MINIX_SUPER_MAGIC:
-	case MINIX_SUPER_MAGIC2:
-	  return MINIX_LINK_MAX;
-
-	case MINIX2_SUPER_MAGIC:
-	case MINIX2_SUPER_MAGIC2:
-	  return MINIX2_LINK_MAX;
-
-	case XENIX_SUPER_MAGIC:
-	  return XENIX_LINK_MAX;
-
-	case SYSV4_SUPER_MAGIC:
-	case SYSV2_SUPER_MAGIC:
-	  return SYSV_LINK_MAX;
-
-	case COH_SUPER_MAGIC:
-	  return COH_LINK_MAX;
-
-	case UFS_MAGIC:
-	case UFS_CIGAM:
-	  return UFS_LINK_MAX;
-
-	case REISERFS_SUPER_MAGIC:
-	  return REISERFS_LINK_MAX;
-
-	default:
-	  return LINUX_LINK_MAX;
-	}
-    }
-
-  return posix_fpathconf (fd, name);
-}
-
-/* Get file-specific information about descriptor FD.  */
-static long int
-posix_fpathconf (fd, name)
-     int fd;
-     int name;
-{
-  if (fd < 0)
-    {
-      __set_errno (EBADF);
-      return -1;
-    }
-
-  switch (name)
-    {
-    default:
-      __set_errno (EINVAL);
-      return -1;
-
-    case _PC_LINK_MAX:
-#ifdef	LINK_MAX
-      return LINK_MAX;
-#else
-      return -1;
-#endif
-
-    case _PC_MAX_CANON:
-#ifdef	MAX_CANON
-      return MAX_CANON;
-#else
-      return -1;
-#endif
-
-    case _PC_MAX_INPUT:
-#ifdef	MAX_INPUT
-      return MAX_INPUT;
-#else
-      return -1;
-#endif
-
-    case _PC_NAME_MAX:
-#ifdef	NAME_MAX
-      {
-	struct statfs buf;
-	int save_errno = errno;
-
-	if (__fstatfs (fd, &buf) < 0)
-	  {
-	    if (errno == ENOSYS)
-	      {
-		__set_errno (save_errno);
-		return NAME_MAX;
-	      }
-	    else if (errno == ENODEV)
-	      __set_errno (EINVAL);
-
-	    return -1;
-	  }
-	else
-	  {
-#ifdef _STATFS_F_NAMELEN
-	    return buf.f_namelen;
-#else
-# ifdef _STATFS_F_NAME_MAX
-	    return buf.f_name_max;
-# else
-	    return NAME_MAX;
-# endif
-#endif
-	  }
-      }
-#else
-      return -1;
-#endif
-
-    case _PC_PATH_MAX:
-#ifdef	PATH_MAX
-      return PATH_MAX;
-#else
-      return -1;
-#endif
-
-    case _PC_PIPE_BUF:
-#ifdef	PIPE_BUF
-      return PIPE_BUF;
-#else
-      return -1;
-#endif
-
-    case _PC_CHOWN_RESTRICTED:
-#ifdef	_POSIX_CHOWN_RESTRICTED
-      return _POSIX_CHOWN_RESTRICTED;
-#else
-      return -1;
-#endif
-
-    case _PC_NO_TRUNC:
-#ifdef	_POSIX_NO_TRUNC
-      return _POSIX_NO_TRUNC;
-#else
-      return -1;
-#endif
-
-    case _PC_VDISABLE:
-#ifdef	_POSIX_VDISABLE
-      return _POSIX_VDISABLE;
-#else
-      return -1;
-#endif
-
-    case _PC_SYNC_IO:
-#ifdef	_POSIX_SYNC_IO
-      return _POSIX_SYNC_IO;
-#else
-      return -1;
-#endif
-
-    case _PC_ASYNC_IO:
-#ifdef	_POSIX_ASYNC_IO
-      {
-	/* AIO is only allowed on regular files and block devices.  */
-	struct stat64 st;
-
-	if (fstat64 (fd, &st) < 0
-	    || (! S_ISREG (st.st_mode) && ! S_ISBLK (st.st_mode)))
-	  return -1;
-	else
-	  return 1;
-      }
-#else
-      return -1;
-#endif
-
-    case _PC_PRIO_IO:
-#ifdef	_POSIX_PRIO_IO
-      return _POSIX_PRIO_IO;
-#else
-      return -1;
-#endif
-
-    case _PC_SOCK_MAXBUF:
-#ifdef	SOCK_MAXBUF
-      return SOCK_MAXBUF;
-#else
-      return -1;
-#endif
-
-    case _PC_FILESIZEBITS:
-#ifdef FILESIZEBITS
-      return FILESIZEBITS;
-#else
-      /* We let platforms with larger file sizes overwrite this value.  */
-      return 32;
-#endif
-
-    case _PC_REC_INCR_XFER_SIZE:
-      /* XXX It is not entirely clear what the limit is supposed to do.
-	 What is incremented?  */
-      return -1;
-
-    case _PC_REC_MAX_XFER_SIZE:
-      /* XXX It is not entirely clear what the limit is supposed to do.
-	 In general there is no top limit of the number of bytes which
-	 case be transported at once.  */
-      return -1;
-
-    case _PC_REC_MIN_XFER_SIZE:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume this is the block size of the filesystem.  */
-	struct statvfs64 sv;
-
-	if (__fstatvfs64 (fd, &sv) < 0)
-	  return -1;
-	return sv.f_bsize;
-      }
-
-    case _PC_REC_XFER_ALIGN:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume that the number should reflect the minimal block
-	   alignment.  */
-	struct statvfs64 sv;
-
-	if (__fstatvfs64 (fd, &sv) < 0)
-	  return -1;
-	return sv.f_frsize;
-      }
-
-    case _PC_ALLOC_SIZE_MIN:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume that the number should reflect the minimal block
-	   alignment.  */
-	struct statvfs64 sv;
-
-	if (__fstatvfs64 (fd, &sv) < 0)
-	  return -1;
-	return sv.f_frsize;
-      }
-
-    case _PC_SYMLINK_MAX:
-      /* In general there are no limits.  If a system has one it should
-	 overwrite this case.  */
-      return -1;
-    }
-}
-
-weak_alias (__fpathconf, fpathconf)
diff --git a/newlib/libc/sys/linux/free.c b/newlib/libc/sys/linux/free.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/free.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/freer.c b/newlib/libc/sys/linux/freer.c
deleted file mode 100644
index d8d7f9828..000000000
--- a/newlib/libc/sys/linux/freer.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void
-_free_r (struct _reent *ptr, void *addr)
-{
-  free (addr);
-}
diff --git a/newlib/libc/sys/linux/fstab.c b/newlib/libc/sys/linux/fstab.c
deleted file mode 100644
index f98f4b740..000000000
--- a/newlib/libc/sys/linux/fstab.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/* Copyright (C) 1995, 1996, 1997, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <fstab.h>
-#include <mntent.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bits/libc-lock.h>
-#include <libc-symbols.h>
-
-#define BUFFER_SIZE 0x1fc0
-
-struct fstab_state
-{
-  FILE *fs_fp;
-  char *fs_buffer;
-  struct mntent fs_mntres;
-  struct fstab fs_ret;
-};
-
-static struct fstab_state *fstab_init (int opt_rewind);
-static struct mntent *fstab_fetch (struct fstab_state *state);
-static struct fstab *fstab_convert (struct fstab_state *state);
-
-static struct fstab_state fstab_state;
-
-
-int
-setfsent (void)
-{
-  return fstab_init (1) != NULL;
-}
-
-
-struct fstab *
-getfsent (void)
-{
-  struct fstab_state *state;
-
-  state = fstab_init (0);
-  if (state == NULL)
-    return NULL;
-  if (fstab_fetch (state) == NULL)
-    return NULL;
-  return fstab_convert (state);
-}
-
-
-struct fstab *
-getfsspec (name)
-     const char *name;
-{
-  struct fstab_state *state;
-  struct mntent *m;
-
-  state = fstab_init (1);
-  if (state == NULL)
-    return NULL;
-  while ((m = fstab_fetch (state)) != NULL)
-    if (strcmp (m->mnt_fsname, name) == 0)
-      return fstab_convert (state);
-  return NULL;
-}
-
-
-struct fstab *
-getfsfile (name)
-     const char *name;
-{
-  struct fstab_state *state;
-  struct mntent *m;
-
-  state = fstab_init (1);
-  if (state == NULL)
-    return NULL;
-  while ((m = fstab_fetch (state)) != NULL)
-    if (strcmp (m->mnt_dir, name) == 0)
-      return fstab_convert (state);
-  return NULL;
-}
-
-
-void
-endfsent ()
-{
-  struct fstab_state *state;
-
-  state = &fstab_state;
-  if (state->fs_fp != NULL)
-    {
-      (void) __endmntent (state->fs_fp);
-      state->fs_fp = NULL;
-    }
-}
-
-
-static struct fstab_state *
-fstab_init (int opt_rewind)
-{
-  struct fstab_state *state;
-  char *buffer;
-  FILE *fp;
-
-  state = &fstab_state;
-
-  buffer = state->fs_buffer;
-  if (buffer == NULL)
-    {
-      buffer = (char *) malloc (BUFFER_SIZE);
-      if (buffer == NULL)
-	return NULL;
-      state->fs_buffer = buffer;
-    }
-
-  fp = state->fs_fp;
-  if (fp != NULL)
-    {
-      if (opt_rewind)
-	rewind (fp);
-    }
-  else
-    {
-      fp = __setmntent (_PATH_FSTAB, "r");
-      if (fp == NULL)
-	return NULL;
-      state->fs_fp = fp;
-    }
-
-  return state;
-}
-
-
-static struct mntent *
-fstab_fetch (struct fstab_state *state)
-{
-  return __getmntent_r (state->fs_fp, &state->fs_mntres,
-			state->fs_buffer, BUFFER_SIZE);
-}
-
-
-static struct fstab *
-fstab_convert (struct fstab_state *state)
-{
-  struct mntent *m;
-  struct fstab *f;
-
-  m = &state->fs_mntres;
-  f = &state->fs_ret;
-
-  f->fs_spec = m->mnt_fsname;
-  f->fs_file = m->mnt_dir;
-  f->fs_vfstype = m->mnt_type;
-  f->fs_mntops = m->mnt_opts;
-  f->fs_type = (__hasmntopt (m, FSTAB_RW) ? FSTAB_RW :
-		__hasmntopt (m, FSTAB_RQ) ? FSTAB_RQ :
-		__hasmntopt (m, FSTAB_RO) ? FSTAB_RO :
-		__hasmntopt (m, FSTAB_SW) ? FSTAB_SW :
-		__hasmntopt (m, FSTAB_XX) ? FSTAB_XX :
-		"??");
-  f->fs_freq = m->mnt_freq;
-  f->fs_passno = m->mnt_passno;
-  return f;
-}
-
-
-/* Make sure the memory is freed if the programs ends while in
-   memory-debugging mode and something actually was allocated.  */
-static void
-__attribute__ ((unused))
-fstab_free (void)
-{
-  char *buffer;
-
-  buffer = fstab_state.fs_buffer;
-  if (buffer != NULL)
-    free ((void *) buffer);
-}
-
-text_set_element (__libc_subfreeres, fstab_free);
diff --git a/newlib/libc/sys/linux/fstatvfs.c b/newlib/libc/sys/linux/fstatvfs.c
deleted file mode 100644
index e1a12603a..000000000
--- a/newlib/libc/sys/linux/fstatvfs.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define _GNU_SOURCE
-
-#include <errno.h>
-#include <mntent.h>
-#include <paths.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
-#include <sys/statvfs.h>
-
-
-int
-fstatvfs (int fd, struct statvfs *buf)
-{
-  struct statfs fsbuf;
-  struct stat64 st;
-
-  /* Get as much information as possible from the system.  */
-  if (__fstatfs (fd, &fsbuf) < 0)
-    return -1;
-
-#define STAT(st) fstat64 (fd, st)
-#include "internal_statvfs.c"
-
-  /* We signal success if the statfs call succeeded.  */
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/fstatvfs64.c b/newlib/libc/sys/linux/fstatvfs64.c
deleted file mode 100644
index 65c9e609b..000000000
--- a/newlib/libc/sys/linux/fstatvfs64.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Return information about the filesystem on which FD resides.
-   Copyright (C) 1996, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/statvfs.h>
-#include <string.h>
-#include <machine/weakalias.h>
-
-/* Return information about the filesystem on which FD resides.  */
-int
-__fstatvfs64 (int fd, struct statvfs64 *buf)
-{
-  struct statvfs buf32;
-
-  if (fstatvfs (fd, &buf32) < 0)
-    return -1;
-
-  buf->f_bsize = buf32.f_bsize;
-  buf->f_frsize = buf32.f_frsize;
-  buf->f_blocks = buf32.f_blocks;
-  buf->f_bfree = buf32.f_bfree;
-  buf->f_bavail = buf32.f_bavail;
-  buf->f_files = buf32.f_files;
-  buf->f_ffree = buf32.f_ffree;
-  buf->f_favail = buf32.f_favail;
-  buf->f_fsid = buf32.f_fsid;
-  buf->f_flag = buf32.f_flag;
-  buf->f_namemax = buf32.f_namemax;
-  memcpy (buf->__f_spare, buf32.__f_spare, sizeof (buf32.__f_spare));
-
-  return 0;
-}
-weak_alias (__fstatvfs64, fstatvfs64)
diff --git a/newlib/libc/sys/linux/ftok.c b/newlib/libc/sys/linux/ftok.c
deleted file mode 100644
index 2f4b684b5..000000000
--- a/newlib/libc/sys/linux/ftok.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1995, 1996, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, August 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib by Jeff Johnston, June 10/2002 */
-
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/stat.h>
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-#define STAT stat64
-#else
-#define STAT stat
-#endif
-
-key_t
-ftok (pathname, proj_id)
-     const char *pathname;
-     int proj_id;
-{
-  struct STAT st;
-  key_t key;
-
-  if (STAT (pathname, &st) < 0)
-    return (key_t) -1;
-
-  key = ((st.st_ino & 0xffff) | ((st.st_dev & 0xff) << 16)
-	 | ((proj_id & 0xff) << 24));
-
-  return key;
-}
diff --git a/newlib/libc/sys/linux/ftw.c b/newlib/libc/sys/linux/ftw.c
deleted file mode 100644
index a7f7259bc..000000000
--- a/newlib/libc/sys/linux/ftw.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/* File tree walker functions.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib by Jeff Johnston, July 26, 2002 */
-
-#define _GNU_SOURCE 1
-
-#include <dirent.h>
-#include <errno.h>
-#include <ftw.h>
-#include <search.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-
-extern struct dirent64 *__readdir64 (DIR *);
-
-/* #define NDEBUG 1 */
-#include <assert.h>
-
-/* Support for the LFS API version.  */
-#ifndef FTW_NAME
-# define FTW_NAME ftw
-# define NFTW_NAME nftw
-# define INO_T ino_t
-# define STAT stat
-# define LXSTAT lstat
-# define XSTAT stat
-# define FTW_FUNC_T __ftw_func_t
-# define NFTW_FUNC_T __nftw_func_t
-#endif
-
-#define dirfd(x) ((x)->dd_fd)
-
-struct dir_data
-{
-  DIR *stream;
-  char *content;
-};
-
-struct known_object
-{
-  dev_t dev;
-  INO_T ino;
-};
-
-struct ftw_data
-{
-  /* Array with pointers to open directory streams.  */
-  struct dir_data **dirstreams;
-  size_t actdir;
-  size_t maxdir;
-
-  /* Buffer containing name of currently processed object.  */
-  char *dirbuf;
-  size_t dirbufsize;
-
-  /* Passed as fourth argument to `nftw' callback.  The `base' member
-     tracks the content of the `dirbuf'.  */
-  struct FTW ftw;
-
-  /* Flags passed to `nftw' function.  0 for `ftw'.  */
-  int flags;
-
-  /* Conversion array for flag values.  It is the identity mapping for
-     `nftw' calls, otherwise it maps the values to those know by
-     `ftw'.  */
-  const int *cvt_arr;
-
-  /* Callback function.  We always use the `nftw' form.  */
-  NFTW_FUNC_T func;
-
-  /* Device of starting point.  Needed for FTW_MOUNT.  */
-  dev_t dev;
-
-  /* Data structure for keeping fingerprints of already processed
-     object.  This is needed when not using FTW_PHYS.  */
-  void *known_objects;
-};
-
-
-/* Internally we use the FTW_* constants used for `nftw'.  When the
-   process called `ftw' we must reduce the flag to the known flags
-   for `ftw'.  */
-static const int nftw_arr[] =
-{
-  FTW_F, FTW_D, FTW_DNR, FTW_NS, FTW_SL, FTW_DP, FTW_SLN
-};
-
-static const int ftw_arr[] =
-{
-  FTW_F, FTW_D, FTW_DNR, FTW_NS, FTW_F, FTW_D, FTW_NS
-};
-
-
-/* Forward declarations of local functions.  */
-static int ftw_dir (struct ftw_data *data, struct STAT *st);
-
-
-static int
-object_compare (const void *p1, const void *p2)
-{
-  /* We don't need a sophisticated and useful comparison.  We are only
-     interested in equality.  However, we must be careful not to
-     accidentally compare `holes' in the structure.  */
-  const struct known_object *kp1 = p1, *kp2 = p2;
-  int cmp1;
-  cmp1 = (kp1->dev > kp2->dev) - (kp1->dev < kp2->dev);
-  if (cmp1 != 0)
-    return cmp1;
-  return (kp1->ino > kp2->ino) - (kp1->ino < kp2->ino);
-}
-
-
-static inline int
-add_object (struct ftw_data *data, struct STAT *st)
-{
-  struct known_object *newp = malloc (sizeof (struct known_object));
-  if (newp == NULL)
-    return -1;
-  newp->dev = st->st_dev;
-  newp->ino = st->st_ino;
-  return tsearch (newp, &data->known_objects, object_compare) ? 0 : -1;
-}
-
-
-static inline int
-find_object (struct ftw_data *data, struct STAT *st)
-{
-  struct known_object obj = { dev: st->st_dev, ino: st->st_ino };
-  return tfind (&obj, &data->known_objects, object_compare) != NULL;
-}
-
-
-static inline int
-open_dir_stream (struct ftw_data *data, struct dir_data *dirp)
-{
-  int result = 0;
-
-  if (data->dirstreams[data->actdir] != NULL)
-    {
-      /* Oh, oh.  We must close this stream.  Get all remaining
-	 entries and store them as a list in the `content' member of
-	 the `struct dir_data' variable.  */
-      size_t bufsize = 1024;
-      char *buf = malloc (bufsize);
-
-      if (buf == NULL)
-	result = -1;
-      else
-	{
-	  DIR *st = data->dirstreams[data->actdir]->stream;
-	  struct dirent64 *d;
-	  size_t actsize = 0;
-
-	  while ((d = __readdir64 (st)) != NULL)
-	    {
-	      size_t this_len = strlen (d->d_name);
-	      if (actsize + this_len + 2 >= bufsize)
-		{
-		  char *newp;
-		  bufsize += MAX (1024, 2 * this_len);
-		  newp = realloc (buf, bufsize);
-		  if (newp == NULL)
-		    {
-		      /* No more memory.  */
-		      int save_err = errno;
-		      free (buf);
-		      __set_errno (save_err);
-		      result = -1;
-		      break;
-		    }
-		  buf = newp;
-		}
-
-	      *((char *) mempcpy (buf + actsize, d->d_name, this_len))
-		= '\0';
-	      actsize += this_len + 1;
-	    }
-
-	  /* Terminate the list with an additional NUL byte.  */
-	  buf[actsize++] = '\0';
-
-	  /* Shrink the buffer to what we actually need.  */
-	  data->dirstreams[data->actdir]->content = realloc (buf, actsize);
-	  if (data->dirstreams[data->actdir]->content == NULL)
-	    {
-	      int save_err = errno;
-	      free (buf);
-	      __set_errno (save_err);
-	      result = -1;
-	    }
-	  else
-	    {
-	      closedir (st);
-	      data->dirstreams[data->actdir]->stream = NULL;
-	      data->dirstreams[data->actdir] = NULL;
-	    }
-	}
-    }
-
-  /* Open the new stream.  */
-  if (result == 0)
-    {
-      assert (data->dirstreams[data->actdir] == NULL);
-
-      dirp->stream = opendir (data->dirbuf);
-      if (dirp->stream == NULL)
-	result = -1;
-      else
-	{
-	  dirp->content = NULL;
-	  data->dirstreams[data->actdir] = dirp;
-
-	  if (++data->actdir == data->maxdir)
-	    data->actdir = 0;
-	}
-    }
-
-  return result;
-}
-
-
-static inline int
-process_entry (struct ftw_data *data, struct dir_data *dir, const char *name,
-	       size_t namlen)
-{
-  struct STAT st;
-  int result = 0;
-  int flag = 0;
-
-  if (name[0] == '.' && (name[1] == '\0'
-			 || (name[1] == '.' && name[2] == '\0')))
-    /* Don't process the "." and ".." entries.  */
-    return 0;
-
-  if (data->dirbufsize < data->ftw.base + namlen + 2)
-    {
-      /* Enlarge the buffer.  */
-      char *newp;
-
-      data->dirbufsize *= 2;
-      newp = realloc (data->dirbuf, data->dirbufsize);
-      if (newp == NULL)
-	return -1;
-      data->dirbuf = newp;
-    }
-
-  *((char *) mempcpy (data->dirbuf + data->ftw.base, name, namlen)) = '\0';
-
-  if (((data->flags & FTW_PHYS)
-       ? LXSTAT (data->dirbuf, &st)
-       : XSTAT (data->dirbuf, &st)) < 0)
-    {
-      if (errno != EACCES && errno != ENOENT)
-	result = -1;
-      else if (!(data->flags & FTW_PHYS)
-	       && LXSTAT (data->dirbuf, &st) == 0
-	       && S_ISLNK (st.st_mode))
-	flag = FTW_SLN;
-      else
-	flag = FTW_NS;
-    }
-  else
-    {
-      if (S_ISDIR (st.st_mode))
-	flag = FTW_D;
-      else if (S_ISLNK (st.st_mode))
-	flag = FTW_SL;
-      else
-	flag = FTW_F;
-    }
-
-  if (result == 0
-      && (flag == FTW_NS
-	  || !(data->flags & FTW_MOUNT) || st.st_dev == data->dev))
-    {
-      if (flag == FTW_D)
-	{
-	  if ((data->flags & FTW_PHYS)
-	      || (!find_object (data, &st)
-		  /* Remember the object.  */
-		  && (result = add_object (data, &st)) == 0))
-	    {
-	      result = ftw_dir (data, &st);
-
-	      if (result == 0 && (data->flags & FTW_CHDIR))
-		{
-		  /* Change back to current directory.  */
-		  int done = 0;
-		  if (dir->stream != NULL)
-		    if (fchdir (dirfd (dir->stream)) == 0)
-		      done = 1;
-
-		  if (!done)
-		    {
-		      if (data->ftw.base == 1)
-			{
-			  if (chdir ("/") < 0)
-			    result = -1;
-			}
-		      else
-			{
-			  /* Please note that we overwrite a slash.  */
-			  data->dirbuf[data->ftw.base - 1] = '\0';
-
-			  if (chdir (data->dirbuf) < 0)
-			    result = -1;
-
-			  data->dirbuf[data->ftw.base - 1] = '/';
-			}
-		    }
-		}
-	    }
-	}
-      else
-	result = (*data->func) (data->dirbuf, &st, data->cvt_arr[flag],
-				&data->ftw);
-    }
-
-  return result;
-}
-
-
-static int
-ftw_dir (struct ftw_data *data, struct STAT *st)
-{
-  struct dir_data dir;
-  struct dirent64 *d;
-  int previous_base = data->ftw.base;
-  int result;
-  char *startp;
-
-  /* Open the stream for this directory.  This might require that
-     another stream has to be closed.  */
-  result = open_dir_stream (data, &dir);
-  if (result != 0)
-    {
-      if (errno == EACCES)
-	/* We cannot read the directory.  Signal this with a special flag.  */
-	result = (*data->func) (data->dirbuf, st, FTW_DNR, &data->ftw);
-
-      return result;
-    }
-
-  /* First, report the directory (if not depth-first).  */
-  if (!(data->flags & FTW_DEPTH))
-    {
-      result = (*data->func) (data->dirbuf, st, FTW_D, &data->ftw);
-      if (result != 0)
-	return result;
-    }
-
-  /* If necessary, change to this directory.  */
-  if (data->flags & FTW_CHDIR)
-    {
-      if (fchdir (dirfd (dir.stream)) < 0)
-	{
-	  if (errno == ENOSYS)
-	    {
-	      if (chdir (data->dirbuf) < 0)
-		result = -1;
-	    }
-	  else
-	    result = -1;
-	}
-
-      if (result != 0)
-	{
-	  int save_err = errno;
-	  closedir (dir.stream);
-	  __set_errno (save_err);
-
-	  if (data->actdir-- == 0)
-	    data->actdir = data->maxdir - 1;
-	  data->dirstreams[data->actdir] = NULL;
-
-	  return result;
-	}
-    }
-
-  /* Next, update the `struct FTW' information.  */
-  ++data->ftw.level;
-  startp = strchr (data->dirbuf, '\0');
-  /* There always must be a directory name.  */
-  assert (startp != data->dirbuf);
-  if (startp[-1] != '/')
-    *startp++ = '/';
-  data->ftw.base = startp - data->dirbuf;
-
-  while (dir.stream != NULL && (d = __readdir64 (dir.stream)) != NULL)
-    {
-      result = process_entry (data, &dir, d->d_name, strlen (d->d_name));
-      if (result != 0)
-	break;
-    }
-
-  if (dir.stream != NULL)
-    {
-      /* The stream is still open.  I.e., we did not need more
-	 descriptors.  Simply close the stream now.  */
-      int save_err = errno;
-
-      assert (dir.content == NULL);
-
-      closedir (dir.stream);
-      __set_errno (save_err);
-
-      if (data->actdir-- == 0)
-	data->actdir = data->maxdir - 1;
-      data->dirstreams[data->actdir] = NULL;
-    }
-  else
-    {
-      int save_err;
-      char *runp = dir.content;
-
-      while (result == 0 && *runp != '\0')
-	{
-	  char *endp = strchr (runp, '\0');
-
-	  result = process_entry (data, &dir, runp, endp - runp);
-
-	  runp = endp + 1;
-	}
-
-      save_err = errno;
-      free (dir.content);
-      __set_errno (save_err);
-    }
-
-  /* Prepare the return, revert the `struct FTW' information.  */
-  data->dirbuf[data->ftw.base - 1] = '\0';
-  --data->ftw.level;
-  data->ftw.base = previous_base;
-
-  /* Finally, if we process depth-first report the directory.  */
-  if (result == 0 && (data->flags & FTW_DEPTH))
-    result = (*data->func) (data->dirbuf, st, FTW_DP, &data->ftw);
-
-  return result;
-}
-
-
-static int
-ftw_startup (const char *dir, int is_nftw, void *func, int descriptors,
-	     int flags)
-{
-  struct ftw_data data;
-  struct STAT st;
-  int result = 0;
-  int save_err;
-  int len;
-  char *cwd = NULL;
-  char *cp;
-
-  /* First make sure the parameters are reasonable.  */
-  if (dir[0] == '\0')
-    {
-      __set_errno (ENOENT);
-      return -1;
-    }
-
-  if (access (dir, R_OK) != 0)
-    return -1;
-
-  data.maxdir = descriptors < 1 ? 1 : descriptors;
-  data.actdir = 0;
-  data.dirstreams = (struct dir_data **) alloca (data.maxdir
-						 * sizeof (struct dir_data *));
-  memset (data.dirstreams, '\0', data.maxdir * sizeof (struct dir_data *));
-
-#ifdef PATH_MAX
-  data.dirbufsize = MAX (2 * strlen (dir), PATH_MAX);
-#else
-  data.dirbufsize = 2 * strlen (dir);
-#endif
-  data.dirbuf = (char *) malloc (data.dirbufsize);
-  if (data.dirbuf == NULL)
-    return -1;
-  len = strlen (dir);
-  cp = mempcpy (data.dirbuf, dir, len);
-  /* Strip trailing slashes.  */
-  while (cp > data.dirbuf + 1 && cp[-1] == '/')
-    --cp;
-  *cp = '\0';
-
-  data.ftw.level = 0;
-
-  /* Find basename.  */
-  while (cp > data.dirbuf && cp[-1] != '/')
-    --cp;
-  data.ftw.base = cp - data.dirbuf;
-
-  data.flags = flags;
-
-  /* This assignment might seem to be strange but it is what we want.
-     The trick is that the first three arguments to the `ftw' and
-     `nftw' callback functions are equal.  Therefore we can call in
-     every case the callback using the format of the `nftw' version
-     and get the correct result since the stack layout for a function
-     call in C allows this.  */
-  data.func = (NFTW_FUNC_T) func;
-
-  /* Since we internally use the complete set of FTW_* values we need
-     to reduce the value range before calling a `ftw' callback.  */
-  data.cvt_arr = is_nftw ? nftw_arr : ftw_arr;
-
-  /* No object known so far.  */
-  data.known_objects = NULL;
-
-  /* Now go to the directory containing the initial file/directory.  */
-  if ((flags & FTW_CHDIR) && data.ftw.base > 0)
-    {
-      /* GNU extension ahead.  */
-      cwd =  getcwd (NULL, 0);
-      if (cwd == NULL)
-	result = -1;
-      else
-	{
-	  /* Change to the directory the file is in.  In data.dirbuf
-	     we have a writable copy of the file name.  Just NUL
-	     terminate it for now and change the directory.  */
-	  if (data.ftw.base == 1)
-	    /* I.e., the file is in the root directory.  */
-	    result = chdir ("/");
-	  else
-	    {
-	      char ch = data.dirbuf[data.ftw.base - 1];
-	      data.dirbuf[data.ftw.base - 1] = '\0';
-	      result = chdir (data.dirbuf);
-	      data.dirbuf[data.ftw.base - 1] = ch;
-	    }
-	}
-    }
-
-  /* Get stat info for start directory.  */
-  if (result == 0)
-    {
-      if (((flags & FTW_PHYS)
-	   ? LXSTAT (data.dirbuf, &st)
-	   : XSTAT (data.dirbuf, &st)) < 0)
-	{
-	  if (errno == EACCES)
-	    result = (*data.func) (data.dirbuf, &st, FTW_NS, &data.ftw);
-	  else if (!(flags & FTW_PHYS)
-		   && errno == ENOENT
-		   && LXSTAT (dir, &st) == 0
-		   && S_ISLNK (st.st_mode))
-	    result = (*data.func) (data.dirbuf, &st, data.cvt_arr[FTW_SLN],
-				   &data.ftw);
-	  else
-	    /* No need to call the callback since we cannot say anything
-	       about the object.  */
-	    result = -1;
-	}
-      else
-	{
-	  if (S_ISDIR (st.st_mode))
-	    {
-	      /* Remember the device of the initial directory in case
-		 FTW_MOUNT is given.  */
-	      data.dev = st.st_dev;
-
-	      /* We know this directory now.  */
-	      if (!(flags & FTW_PHYS))
-		result = add_object (&data, &st);
-
-	      if (result == 0)
-		result = ftw_dir (&data, &st);
-	    }
-	  else
-	    {
-	      int flag = S_ISLNK (st.st_mode) ? FTW_SL : FTW_F;
-
-	      result = (*data.func) (data.dirbuf, &st, data.cvt_arr[flag],
-				     &data.ftw);
-	    }
-	}
-    }
-
-  /* Return to the start directory (if necessary).  */
-  if (cwd != NULL)
-    {
-      int save_err = errno;
-      chdir (cwd);
-      free (cwd);
-      __set_errno (save_err);
-    }
-
-  /* Free all memory.  */
-  save_err = errno;
-  tdestroy (data.known_objects, free);
-  free (data.dirbuf);
-  __set_errno (save_err);
-
-  return result;
-}
-
-
-
-/* Entry points.  */
-
-int
-FTW_NAME (path, func, descriptors)
-     const char *path;
-     FTW_FUNC_T func;
-     int descriptors;
-{
-  return ftw_startup (path, 0, func, descriptors, 0);
-}
-
-int
-NFTW_NAME (path, func, descriptors, flags)
-     const char *path;
-     NFTW_FUNC_T func;
-     int descriptors;
-     int flags;
-{
-  return ftw_startup (path, 1, func, descriptors, flags);
-}
diff --git a/newlib/libc/sys/linux/ftw64.c b/newlib/libc/sys/linux/ftw64.c
deleted file mode 100644
index 216549ac3..000000000
--- a/newlib/libc/sys/linux/ftw64.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* File tree walker functions.  LFS version.
-   Copyright (C) 1996, 1997, 1998, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define FTW_NAME ftw64
-#define NFTW_NAME nftw64
-#define INO_T ino64_t
-#define STAT stat64
-#define LXSTAT lstat64
-#define XSTAT stat64
-#define FTW_FUNC_T __ftw64_func_t
-#define NFTW_FUNC_T __nftw64_func_t
-
-#include "ftw.c"
diff --git a/newlib/libc/sys/linux/funlockfile.c b/newlib/libc/sys/linux/funlockfile.c
deleted file mode 100644
index 82466d30a..000000000
--- a/newlib/libc/sys/linux/funlockfile.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* stub to allow libpthread to override */
-
-#include <stdio.h>
-#include <machine/weakalias.h>
-
-void __libc_funlockfile (FILE *fp)
-{
-}
-weak_alias(__libc_funlockfile,funlockfile)
diff --git a/newlib/libc/sys/linux/getdate.c b/newlib/libc/sys/linux/getdate.c
deleted file mode 100644
index 5c056c750..000000000
--- a/newlib/libc/sys/linux/getdate.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Convert a string representation of time to a time value.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Mark Kettenis <kettenis@phys.uva.nl>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/*
-FUNCTION
-<<getdate>>,<<getdate_r>>---convert a string representation of time to a time value
-
-INDEX
-        getdate
-INDEX
-        getdate_r
-
-ANSI_SYNOPSIS
-        #include <time.h>
-        struct tm *getdate(const char *<[string]>);
-        int getdate_r(const char *<[string]>, struct tm *<[res]>);
-
-TRAD_SYNOPSIS
-        #include <time.h>
-        struct tm *getdate(<[string]>);
-        const char *<[string]>;
-
-        int getdate_r(<[string]>, <[res]>);
-        const char *<[string]>;
-        struct tm *<[res]>;
-
-DESCRIPTION
-<<getdate>> reads a file which is specified by the environment variable:
-DATEMSK.  This file contains a number of formats valid for input to the
-<<strptime>> function.  The input <[string]> is used as input to the format
-strings and the first valid match that occurs is used.  The resultant
-time struct is returned.  If an error occurs, the value <<getdate_err>> is
-set to one of the following values.
-
-     1  the DATEMSK environment variable is null or undefined,
-     2  the template file cannot be opened for reading,
-     3  failed to get file status information,
-     4  the template file is not a regular file,
-     5  an error is encountered while reading the template file,
-     6  memory allication failed (not enough memory available),
-     7  there is no line in the template that matches the input,
-     8  invalid input specification
-
-The <<getdate_r>> routine is similar, except that it returns the error
-code and has the <[res]> time struct pointer passed in.  <<getdate>> is
-non-reentrant.  Applications that wish to be reentrant should use 
-<<getdate_r>> instead of <<getdate>>.  
-
-RETURNS
-<<getdate>> returns a pointer to the traditional time representation 
-(<<struct tm>>).  <<getdate_r>> returns 0 if successful, otherwise it
-returns the error code.
-
-PORTABILITY
-<<getdate>> is defined by the Single Unix specification.
-<<getdate_r>> is a reentrant extension.
-
-<<getdate>> and <<getdate_r>> optionally require <<stat>> and <<access>>.
-*/
-
-
-/* Modified for newlib by Jeff Johnston, June 19/2002 */
-
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/stat.h>
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-# define STAT stat64
-#else
-# define STAT stat
-#endif
-
-#define TM_YEAR_BASE 1900
-
-extern ssize_t __getline (char **, size_t *, FILE *);
-
-/* Prototypes for local functions.  */
-static int first_wday (int year, int mon, int wday);
-static int check_mday (int year, int mon, int mday);
-
-#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0)
-
-/* Error code is set to one of the following values to indicate an error.
-     1  the DATEMSK environment variable is null or undefined,
-     2  the template file cannot be opened for reading,
-     3  failed to get file status information,
-     4  the template file is not a regular file,
-     5  an error is encountered while reading the template file,
-     6  memory allication failed (not enough memory available),
-     7  there is no line in the template that matches the input,
-     8  invalid input specification Example: February 31 or a time is
-        specified that can not be represented in a time_t (representing
-	the time in seconds since 00:00:00 UTC, January 1, 1970) */
-
-/* Returns the first weekday WDAY of month MON in the year YEAR.  */
-static int
-first_wday (int year, int mon, int wday)
-{
-  struct tm tm;
-
-  if (wday == INT_MIN)
-    return 1;
-
-  memset (&tm, 0, sizeof (struct tm));
-  tm.tm_year = year;
-  tm.tm_mon = mon;
-  tm.tm_mday = 1;
-  mktime (&tm);
-
-  return (1 + (wday - tm.tm_wday + 7) % 7);
-}
-
-
-/* Returns 1 if MDAY is a valid day of the month in month MON of year
-   YEAR, and 0 if it is not.  */
-static int
-check_mday (int year, int mon, int mday)
-{
-  switch (mon)
-    {
-    case 0:
-    case 2:
-    case 4:
-    case 6:
-    case 7:
-    case 9:
-    case 11:
-      if (mday >= 1 && mday <= 31)
-	return 1;
-      break;
-    case 3:
-    case 5:
-    case 8:
-    case 10:
-      if (mday >= 1 && mday <= 30)
-	return 1;
-      break;
-    case 1:
-      if (mday >= 1 && mday <= (isleap (year) ? 29 : 28))
-	return 1;
-      break;
-    }
-
-  return 0;
-}
-
-
-int
-getdate_r (const char *string, struct tm *tp)
-{
-  FILE *fp;
-  char *line;
-  size_t len;
-  char *datemsk;
-  char *result = NULL;
-  time_t timer;
-  struct tm tm;
-  struct STAT st;
-  int mday_ok = 0;
-
-  datemsk = getenv ("DATEMSK");
-  if (datemsk == NULL || *datemsk == '\0')
-    return 1;
-
-  if (STAT (datemsk, &st) < 0)
-    return 3;
-
-  if (!S_ISREG (st.st_mode))
-    return 4;
-
-  if (access (datemsk, R_OK) < 0)
-    return 2;
-
-  /* Open the template file.  */
-  fp = fopen (datemsk, "r");
-  if (fp == NULL)
-    return 2;
-
-  line = NULL;
-  len = 0;
-  do
-    {
-      ssize_t n;
-
-      n = __getline (&line, &len, fp);
-      if (n < 0)
-	break;
-      if (line[n - 1] == '\n')
-	line[n - 1] = '\0';
-
-      /* Do the conversion.  */
-      tp->tm_year = tp->tm_mon = tp->tm_mday = tp->tm_wday = INT_MIN;
-      tp->tm_hour = tp->tm_sec = tp->tm_min = INT_MIN;
-      tp->tm_isdst = -1;
-      result = strptime (string, line, tp);
-      if (result && *result == '\0')
-	break;
-    }
-  while (!__sfeof (fp));
-
-  /* Free the buffer.  */
-  free (line);
-
-  /* Check for errors. */
-  if (__sferror (fp))
-    {
-      fclose (fp);
-      return 5;
-    }
-
-  /* Close template file.  */
-  fclose (fp);
-
-  if (result == NULL || *result != '\0')
-    return 7;
-
-  /* Get current time.  */
-  time (&timer);
-  localtime_r (&timer, &tm);
-
-  /* If only the weekday is given, today is assumed if the given day
-     is equal to the current day and next week if it is less.  */
-  if (tp->tm_wday >= 0 && tp->tm_wday <= 6 && tp->tm_year == INT_MIN
-      && tp->tm_mon == INT_MIN && tp->tm_mday == INT_MIN)
-    {
-      tp->tm_year = tm.tm_year;
-      tp->tm_mon = tm.tm_mon;
-      tp->tm_mday = tm.tm_mday + (tp->tm_wday - tm.tm_wday + 7) % 7;
-      mday_ok = 1;
-    }
-
-  /* If only the month is given, the current month is assumed if the
-     given month is equal to the current month and next year if it is
-     less and no year is given (the first day of month is assumed if
-     no day is given.  */
-  if (tp->tm_mon >= 0 && tp->tm_mon <= 11 && tp->tm_mday == INT_MIN)
-    {
-      if (tp->tm_year == INT_MIN)
-	tp->tm_year = tm.tm_year + (((tp->tm_mon - tm.tm_mon) < 0) ? 1 : 0);
-      tp->tm_mday = first_wday (tp->tm_year, tp->tm_mon, tp->tm_wday);
-      mday_ok = 1;
-    }
-
-  /* If no hour, minute and second are given the current hour, minute
-     and second are assumed.  */
-  if (tp->tm_hour == INT_MIN && tp->tm_min == INT_MIN && tp->tm_sec == INT_MIN)
-    {
-      tp->tm_hour = tm.tm_hour;
-      tp->tm_min = tm.tm_min;
-      tp->tm_sec = tm.tm_sec;
-    }
-
-  /* If no date is given, today is assumed if the given hour is
-     greater than the current hour and tomorrow is assumed if
-     it is less.  */
-  if (tp->tm_hour >= 0 && tp->tm_hour <= 23
-      && tp->tm_year == INT_MIN && tp->tm_mon == INT_MIN
-      && tp->tm_mday == INT_MIN && tp->tm_wday == INT_MIN)
-    {
-      tp->tm_year = tm.tm_year;
-      tp->tm_mon = tm.tm_mon;
-      tp->tm_mday = tm.tm_mday + ((tp->tm_hour - tm.tm_hour) < 0 ? 1 : 0);
-      mday_ok = 1;
-    }
-
-  /* Fill in the gaps.  */
-  if (tp->tm_year == INT_MIN)
-    tp->tm_year = tm.tm_year;
-  if (tp->tm_hour == INT_MIN)
-    tp->tm_hour = 0;
-  if (tp->tm_min == INT_MIN)
-    tp->tm_min = 0;
-  if (tp->tm_sec == INT_MIN)
-    tp->tm_sec = 0;
-
-  /* Check if the day of month is within range, and if the time can be
-     represented in a time_t.  We make use of the fact that the mktime
-     call normalizes the struct tm.  */
-  if ((!mday_ok && !check_mday (TM_YEAR_BASE + tp->tm_year, tp->tm_mon,
-				tp->tm_mday))
-      || mktime (tp) == (time_t) -1)
-    return 8;
-
-  return 0;
-}
-
-#ifndef _REENT_ONLY
-struct tm *
-getdate (const char *string)
-{
-  /* Buffer returned by getdate.  */
-  static struct tm tmbuf;
-  int errval = getdate_r (string, &tmbuf);
-
-  if (errval != 0)
-    {
-      getdate_err = errval;
-      return NULL;
-    }
-
-  return &tmbuf;
-}
-#endif /* _REENT_ONLY */
diff --git a/newlib/libc/sys/linux/getdate_err.c b/newlib/libc/sys/linux/getdate_err.c
deleted file mode 100644
index e90b74b83..000000000
--- a/newlib/libc/sys/linux/getdate_err.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* The getdate_err variable is stored in the reentrancy structure.  This
-   function returns its address for use by the getdate_err macro defined in
-   time.h.  */
-
-#include <errno.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-int *
-__getdate_err ()
-{
-  struct _reent *ptr = _REENT;
-  _REENT_CHECK_MISC(ptr);
-  return _REENT_GETDATE_ERR_P(ptr);
-}
-
-#endif
diff --git a/newlib/libc/sys/linux/gethostid.c b/newlib/libc/sys/linux/gethostid.c
deleted file mode 100644
index bf801c74a..000000000
--- a/newlib/libc/sys/linux/gethostid.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Copyright (C) 1995,1996,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <netdb.h>
-
-#define HOSTIDFILE "/etc/hostid"
-#define OLD_HOSTIDFILE "/etc/hostid"
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-# define OPEN __open64
-#else
-# define OPEN __open
-#endif
-
-#ifdef SET_PROCEDURE
-int
-sethostid (id)
-     long int id;
-{
-  int fd;
-  ssize_t written;
-
-  /* Open file for writing.  Everybody is allowed to read this file.  */
-  fd = OPEN (HOSTIDFILE, O_CREAT|O_WRONLY|O_TRUNC, 0644);
-  if (fd < 0)
-    return -1;
-
-  written = __write (fd, &id, sizeof (id));
-
-  __close (fd);
-
-  return written != sizeof (id) ? -1 : 0;
-}
-
-#else
-# include <string.h>
-# include <sys/param.h>
-# include <netdb.h>
-# include <netinet/in.h>
-
-long int
-gethostid ()
-{
-  char hostname[MAXHOSTNAMELEN + 1];
-  size_t buflen;
-  char *buffer;
-  struct hostent hostbuf, *hp;
-  unsigned long int id;
-  struct in_addr in;
-  int herr;
-  int fd;
-
-  /* First try to get the ID from a former invocation of sethostid.  */
-  fd = OPEN (HOSTIDFILE, O_RDONLY);
-  if (fd >= 0)
-    {
-      ssize_t n = __read (fd, &id, sizeof (id));
-
-      __close (fd);
-
-      if (n == sizeof (id))
-	return id;
-    }
-
-  /* Getting from the file was not successful.  An intelligent guess for
-     a unique number of a host is its IP address.  Return this.  */
-  if (__gethostname (hostname, MAXHOSTNAMELEN) < 0 || hostname[0] == '\0')
-    /* This also fails.  Return and arbitrary value.  */
-    return 0;
-
-  buflen = 1024;
-  buffer = alloca (buflen);
-
-  /* To get the IP address we need to know the host name.  */
-  while (__gethostbyname_r (hostname, &hostbuf, buffer, buflen, &hp, &herr)
-	 != 0
-	 || hp == NULL)
-    if (herr != NETDB_INTERNAL || errno != ERANGE)
-      return 0;
-    else
-      {
-	/* Enlarge buffer.  */
-	buflen *= 2;
-	buffer = alloca (buflen);
-      }
-
-  in.s_addr = 0;
-  memcpy (&in, hp->h_addr,
-	  (int) sizeof (in) < hp->h_length ? sizeof (in) : hp->h_length);
-
-  /* For the return value to be not exactly the IP address we do some
-     bit fiddling.  */
-  return in.s_addr << 16 | in.s_addr >> 16;
-}
-#endif
diff --git a/newlib/libc/sys/linux/gethostname.c b/newlib/libc/sys/linux/gethostname.c
deleted file mode 100644
index ef526916f..000000000
--- a/newlib/libc/sys/linux/gethostname.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/utsname.h>
-#include <machine/weakalias.h>
-
-int
-__gethostname (char *name, size_t len)
-{
-	struct utsname nodebuf;
-	size_t nodelen;
-
-	if (uname (&nodebuf))
-		return -1;
-
-	nodelen = strlen (nodebuf.nodename) + 1;
-	if (len < nodelen)
-		memcpy (name, nodebuf.nodename, len);
-	else
-		memcpy (name, nodebuf.nodename, nodelen);
-
-	if (nodelen > len)
-	{
-		errno = ENAMETOOLONG;
-		return -1;
-	}
-	return 0;
-}
-weak_alias(__gethostname, gethostname)
diff --git a/newlib/libc/sys/linux/getlogin.c b/newlib/libc/sys/linux/getlogin.c
deleted file mode 100644
index 3931e7731..000000000
--- a/newlib/libc/sys/linux/getlogin.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* FIXME: dummy stub for now.  */
-#include <errno.h>
-#include <unistd.h>
-
-char *
-_DEFUN_VOID (getlogin)
-{
-  errno = ENOSYS;
-  return NULL;
-}
-
diff --git a/newlib/libc/sys/linux/getopt.c b/newlib/libc/sys/linux/getopt.c
deleted file mode 100644
index cc035d641..000000000
--- a/newlib/libc/sys/linux/getopt.c
+++ /dev/null
@@ -1,1249 +0,0 @@
-/* Getopt for GNU.
-   NOTE: getopt is now part of the C library, so if you don't know what
-   "Keep this file name-space clean" means, talk to drepper@gnu.org
-   before changing it!
-   Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001
-   	Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
-   Ditto for AIX 3.2 and <stdlib.h>.  */
-#ifndef _NO_PROTO
-# define _NO_PROTO
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if !defined __STDC__ || !__STDC__
-/* This is a separate conditional since some stdc systems
-   reject `defined (const)'.  */
-# ifndef const
-#  define const
-# endif
-#endif
-
-#include <stdio.h>
-
-/* Comment out all this code if we are using the GNU C Library, and are not
-   actually compiling the library itself.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#define GETOPT_INTERFACE_VERSION 2
-#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
-# include <gnu-versions.h>
-# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
-#  define ELIDE_CODE
-# endif
-#endif
-
-
-/* This needs to come after some library #include
-   to get __GNU_LIBRARY__ defined.  */
-#ifdef	__GNU_LIBRARY__
-/* Don't include stdlib.h for non-GNU C libraries because some of them
-   contain conflicting prototypes for getopt.  */
-# include <stdlib.h>
-# include <unistd.h>
-#endif	/* GNU C library.  */
-
-#ifdef VMS
-# include <unixlib.h>
-# if HAVE_STRING_H - 0
-#  include <string.h>
-# endif
-#endif
-
-#ifndef _
-/* This is for other GNU distributions with internationalized messages.  */
-# if (HAVE_LIBINTL_H && ENABLE_NLS) || defined _LIBC
-#  include <libintl.h>
-#  ifndef _
-#   define _(msgid)	gettext (msgid)
-#  endif
-# else
-#  define _(msgid)	(msgid)
-# endif
-# if defined _LIBC && defined USE_IN_LIBIO
-#  include <wchar.h>
-# endif
-#endif
-
-/* This version of `getopt' appears to the caller like standard Unix `getopt'
-   but it behaves differently for the user, since it allows the user
-   to intersperse the options with the other arguments.
-
-   As `getopt' works, it permutes the elements of ARGV so that,
-   when it is done, all the options precede everything else.  Thus
-   all application programs are extended to handle flexible argument order.
-
-   Setting the environment variable POSIXLY_CORRECT disables permutation.
-   Then the behavior is completely standard.
-
-   GNU application programs can use a third alternative mode in which
-   they can distinguish the relative order of options and other arguments.  */
-
-#include "getopt.h"
-
-/* For communication from `getopt' to the caller.
-   When `getopt' finds an option that takes an argument,
-   the argument value is returned here.
-   Also, when `ordering' is RETURN_IN_ORDER,
-   each non-option ARGV-element is returned here.  */
-
-char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
-   This is used for communication to and from the caller
-   and for communication between successive calls to `getopt'.
-
-   On entry to `getopt', zero means this is the first call; initialize.
-
-   When `getopt' returns -1, this is the index of the first of the
-   non-option elements that the caller should itself scan.
-
-   Otherwise, `optind' communicates from one call to the next
-   how much of ARGV has been scanned so far.  */
-
-/* 1003.2 says this must be 1 before any call.  */
-int optind = 1;
-
-/* Formerly, initialization of getopt depended on optind==0, which
-   causes problems with re-calling getopt as programs generally don't
-   know that. */
-
-int __getopt_initialized;
-
-/* The next char to be scanned in the option-element
-   in which the last option character we returned was found.
-   This allows us to pick up the scan where we left off.
-
-   If this is zero, or a null string, it means resume the scan
-   by advancing to the next ARGV-element.  */
-
-static char *nextchar;
-
-/* Callers store zero here to inhibit the error message
-   for unrecognized options.  */
-
-int opterr = 1;
-
-/* Set to an option character which was unrecognized.
-   This must be initialized on some systems to avoid linking in the
-   system's own getopt implementation.  */
-
-int optopt = '?';
-
-/* Describe how to deal with options that follow non-option ARGV-elements.
-
-   If the caller did not specify anything,
-   the default is REQUIRE_ORDER if the environment variable
-   POSIXLY_CORRECT is defined, PERMUTE otherwise.
-
-   REQUIRE_ORDER means don't recognize them as options;
-   stop option processing when the first non-option is seen.
-   This is what Unix does.
-   This mode of operation is selected by either setting the environment
-   variable POSIXLY_CORRECT, or using `+' as the first character
-   of the list of option characters.
-
-   PERMUTE is the default.  We permute the contents of ARGV as we scan,
-   so that eventually all the non-options are at the end.  This allows options
-   to be given in any order, even with programs that were not written to
-   expect this.
-
-   RETURN_IN_ORDER is an option available to programs that were written
-   to expect options and other ARGV-elements in any order and that care about
-   the ordering of the two.  We describe each non-option ARGV-element
-   as if it were the argument of an option with character code 1.
-   Using `-' as the first character of the list of option characters
-   selects this mode of operation.
-
-   The special argument `--' forces an end of option-scanning regardless
-   of the value of `ordering'.  In the case of RETURN_IN_ORDER, only
-   `--' can cause `getopt' to return -1 with `optind' != ARGC.  */
-
-static enum
-{
-  REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
-} ordering;
-
-/* Value of POSIXLY_CORRECT environment variable.  */
-static char *posixly_correct;
-
-#ifdef	__GNU_LIBRARY__
-/* We want to avoid inclusion of string.h with non-GNU libraries
-   because there are many ways it can cause trouble.
-   On some systems, it contains special magic macros that don't work
-   in GCC.  */
-# include <string.h>
-# define my_index	strchr
-#else
-
-# if HAVE_STRING_H
-#  include <string.h>
-# else
-#  include <strings.h>
-# endif
-
-/* Avoid depending on library functions or files
-   whose names are inconsistent.  */
-
-#ifndef getenv
-extern char *getenv ();
-#endif
-
-static char *
-my_index (str, chr)
-     const char *str;
-     int chr;
-{
-  while (*str)
-    {
-      if (*str == chr)
-	return (char *) str;
-      str++;
-    }
-  return 0;
-}
-
-/* If using GCC, we can safely declare strlen this way.
-   If not using GCC, it is ok not to declare it.  */
-#ifdef __GNUC__
-/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
-   That was relevant to code that was here before.  */
-# if (!defined __STDC__ || !__STDC__) && !defined strlen
-/* gcc with -traditional declares the built-in strlen to return int,
-   and has done so at least since version 2.4.5. -- rms.  */
-extern int strlen (const char *);
-# endif /* not __STDC__ */
-#endif /* __GNUC__ */
-
-#endif /* not __GNU_LIBRARY__ */
-
-/* Handle permutation of arguments.  */
-
-/* Describe the part of ARGV that contains non-options that have
-   been skipped.  `first_nonopt' is the index in ARGV of the first of them;
-   `last_nonopt' is the index after the last of them.  */
-
-static int first_nonopt;
-static int last_nonopt;
-
-#ifdef _LIBC
-/* Stored original parameters.
-   XXX This is no good solution.  We should rather copy the args so
-   that we can compare them later.  But we must not use malloc(3).  */
-extern int __libc_argc;
-extern char **__libc_argv;
-
-/* Bash 2.0 gives us an environment variable containing flags
-   indicating ARGV elements that should not be considered arguments.  */
-
-# ifdef USE_NONOPTION_FLAGS
-/* Defined in getopt_init.c  */
-extern char *__getopt_nonoption_flags;
-
-static int nonoption_flags_max_len;
-static int nonoption_flags_len;
-# endif
-
-# ifdef USE_NONOPTION_FLAGS
-#  define SWAP_FLAGS(ch1, ch2) \
-  if (nonoption_flags_len > 0)						      \
-    {									      \
-      char __tmp = __getopt_nonoption_flags[ch1];			      \
-      __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2];	      \
-      __getopt_nonoption_flags[ch2] = __tmp;				      \
-    }
-# else
-#  define SWAP_FLAGS(ch1, ch2)
-# endif
-#else	/* !_LIBC */
-# define SWAP_FLAGS(ch1, ch2)
-#endif	/* _LIBC */
-
-/* Exchange two adjacent subsequences of ARGV.
-   One subsequence is elements [first_nonopt,last_nonopt)
-   which contains all the non-options that have been skipped so far.
-   The other is elements [last_nonopt,optind), which contains all
-   the options processed since those non-options were skipped.
-
-   `first_nonopt' and `last_nonopt' are relocated so that they describe
-   the new indices of the non-options in ARGV after they are moved.  */
-
-#if defined __STDC__ && __STDC__
-static void exchange (char **);
-#endif
-
-static void
-exchange (argv)
-     char **argv;
-{
-  int bottom = first_nonopt;
-  int middle = last_nonopt;
-  int top = optind;
-  char *tem;
-
-  /* Exchange the shorter segment with the far end of the longer segment.
-     That puts the shorter segment into the right place.
-     It leaves the longer segment in the right place overall,
-     but it consists of two parts that need to be swapped next.  */
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
-  /* First make sure the handling of the `__getopt_nonoption_flags'
-     string can work normally.  Our top argument must be in the range
-     of the string.  */
-  if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len)
-    {
-      /* We must extend the array.  The user plays games with us and
-	 presents new arguments.  */
-      char *new_str = malloc (top + 1);
-      if (new_str == NULL)
-	nonoption_flags_len = nonoption_flags_max_len = 0;
-      else
-	{
-	  memset (__mempcpy (new_str, __getopt_nonoption_flags,
-			     nonoption_flags_max_len),
-		  '\0', top + 1 - nonoption_flags_max_len);
-	  nonoption_flags_max_len = top + 1;
-	  __getopt_nonoption_flags = new_str;
-	}
-    }
-#endif
-
-  while (top > middle && middle > bottom)
-    {
-      if (top - middle > middle - bottom)
-	{
-	  /* Bottom segment is the short one.  */
-	  int len = middle - bottom;
-	  register int i;
-
-	  /* Swap it with the top part of the top segment.  */
-	  for (i = 0; i < len; i++)
-	    {
-	      tem = argv[bottom + i];
-	      argv[bottom + i] = argv[top - (middle - bottom) + i];
-	      argv[top - (middle - bottom) + i] = tem;
-	      SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
-	    }
-	  /* Exclude the moved bottom segment from further swapping.  */
-	  top -= len;
-	}
-      else
-	{
-	  /* Top segment is the short one.  */
-	  int len = top - middle;
-	  register int i;
-
-	  /* Swap it with the bottom part of the bottom segment.  */
-	  for (i = 0; i < len; i++)
-	    {
-	      tem = argv[bottom + i];
-	      argv[bottom + i] = argv[middle + i];
-	      argv[middle + i] = tem;
-	      SWAP_FLAGS (bottom + i, middle + i);
-	    }
-	  /* Exclude the moved top segment from further swapping.  */
-	  bottom += len;
-	}
-    }
-
-  /* Update records for the slots the non-options now occupy.  */
-
-  first_nonopt += (optind - last_nonopt);
-  last_nonopt = optind;
-}
-
-/* Initialize the internal data when the first call is made.  */
-
-#if defined __STDC__ && __STDC__
-static const char *_getopt_initialize (int, char *const *, const char *);
-#endif
-static const char *
-_getopt_initialize (argc, argv, optstring)
-     int argc;
-     char *const *argv;
-     const char *optstring;
-{
-  /* Start processing options with ARGV-element 1 (since ARGV-element 0
-     is the program name); the sequence of previously skipped
-     non-option ARGV-elements is empty.  */
-
-  first_nonopt = last_nonopt = optind;
-
-  nextchar = NULL;
-
-  posixly_correct = getenv ("POSIXLY_CORRECT");
-
-  /* Determine how to handle the ordering of options and nonoptions.  */
-
-  if (optstring[0] == '-')
-    {
-      ordering = RETURN_IN_ORDER;
-      ++optstring;
-    }
-  else if (optstring[0] == '+')
-    {
-      ordering = REQUIRE_ORDER;
-      ++optstring;
-    }
-  else if (posixly_correct != NULL)
-    ordering = REQUIRE_ORDER;
-  else
-    ordering = PERMUTE;
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
-  if (posixly_correct == NULL
-      && argc == __libc_argc && argv == __libc_argv)
-    {
-      if (nonoption_flags_max_len == 0)
-	{
-	  if (__getopt_nonoption_flags == NULL
-	      || __getopt_nonoption_flags[0] == '\0')
-	    nonoption_flags_max_len = -1;
-	  else
-	    {
-	      const char *orig_str = __getopt_nonoption_flags;
-	      int len = nonoption_flags_max_len = strlen (orig_str);
-	      if (nonoption_flags_max_len < argc)
-		nonoption_flags_max_len = argc;
-	      __getopt_nonoption_flags =
-		(char *) malloc (nonoption_flags_max_len);
-	      if (__getopt_nonoption_flags == NULL)
-		nonoption_flags_max_len = -1;
-	      else
-		memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
-			'\0', nonoption_flags_max_len - len);
-	    }
-	}
-      nonoption_flags_len = nonoption_flags_max_len;
-    }
-  else
-    nonoption_flags_len = 0;
-#endif
-
-  return optstring;
-}
-
-/* Scan elements of ARGV (whose length is ARGC) for option characters
-   given in OPTSTRING.
-
-   If an element of ARGV starts with '-', and is not exactly "-" or "--",
-   then it is an option element.  The characters of this element
-   (aside from the initial '-') are option characters.  If `getopt'
-   is called repeatedly, it returns successively each of the option characters
-   from each of the option elements.
-
-   If `getopt' finds another option character, it returns that character,
-   updating `optind' and `nextchar' so that the next call to `getopt' can
-   resume the scan with the following option character or ARGV-element.
-
-   If there are no more option characters, `getopt' returns -1.
-   Then `optind' is the index in ARGV of the first ARGV-element
-   that is not an option.  (The ARGV-elements have been permuted
-   so that those that are not options now come last.)
-
-   OPTSTRING is a string containing the legitimate option characters.
-   If an option character is seen that is not listed in OPTSTRING,
-   return '?' after printing an error message.  If you set `opterr' to
-   zero, the error message is suppressed but we still return '?'.
-
-   If a char in OPTSTRING is followed by a colon, that means it wants an arg,
-   so the following text in the same ARGV-element, or the text of the following
-   ARGV-element, is returned in `optarg'.  Two colons mean an option that
-   wants an optional arg; if there is text in the current ARGV-element,
-   it is returned in `optarg', otherwise `optarg' is set to zero.
-
-   If OPTSTRING starts with `-' or `+', it requests different methods of
-   handling the non-option ARGV-elements.
-   See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
-
-   Long-named options begin with `--' instead of `-'.
-   Their names may be abbreviated as long as the abbreviation is unique
-   or is an exact match for some defined option.  If they have an
-   argument, it follows the option name in the same ARGV-element, separated
-   from the option name by a `=', or else the in next ARGV-element.
-   When `getopt' finds a long-named option, it returns 0 if that option's
-   `flag' field is nonzero, the value of the option's `val' field
-   if the `flag' field is zero.
-
-   The elements of ARGV aren't really const, because we permute them.
-   But we pretend they're const in the prototype to be compatible
-   with other systems.
-
-   LONGOPTS is a vector of `struct option' terminated by an
-   element containing a name which is zero.
-
-   LONGIND returns the index in LONGOPT of the long-named option found.
-   It is only valid when a long-named option has been found by the most
-   recent call.
-
-   If LONG_ONLY is nonzero, '-' as well as '--' can introduce
-   long-named options.  */
-
-int
-_getopt_internal (argc, argv, optstring, longopts, longind, long_only)
-     int argc;
-     char *const *argv;
-     const char *optstring;
-     const struct option *longopts;
-     int *longind;
-     int long_only;
-{
-  int print_errors = opterr;
-  if (optstring[0] == ':')
-    print_errors = 0;
-
-  if (argc < 1)
-    return -1;
-
-  optarg = NULL;
-
-  if (optind == 0 || !__getopt_initialized)
-    {
-      if (optind == 0)
-	optind = 1;	/* Don't scan ARGV[0], the program name.  */
-      optstring = _getopt_initialize (argc, argv, optstring);
-      __getopt_initialized = 1;
-    }
-
-  /* Test whether ARGV[optind] points to a non-option argument.
-     Either it does not have option syntax, or there is an environment flag
-     from the shell indicating it is not an option.  The later information
-     is only used when the used in the GNU libc.  */
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
-# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0'	      \
-		      || (optind < nonoption_flags_len			      \
-			  && __getopt_nonoption_flags[optind] == '1'))
-#else
-# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0')
-#endif
-
-  if (nextchar == NULL || *nextchar == '\0')
-    {
-      /* Advance to the next ARGV-element.  */
-
-      /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
-	 moved back by the user (who may also have changed the arguments).  */
-      if (last_nonopt > optind)
-	last_nonopt = optind;
-      if (first_nonopt > optind)
-	first_nonopt = optind;
-
-      if (ordering == PERMUTE)
-	{
-	  /* If we have just processed some options following some non-options,
-	     exchange them so that the options come first.  */
-
-	  if (first_nonopt != last_nonopt && last_nonopt != optind)
-	    exchange ((char **) argv);
-	  else if (last_nonopt != optind)
-	    first_nonopt = optind;
-
-	  /* Skip any additional non-options
-	     and extend the range of non-options previously skipped.  */
-
-	  while (optind < argc && NONOPTION_P)
-	    optind++;
-	  last_nonopt = optind;
-	}
-
-      /* The special ARGV-element `--' means premature end of options.
-	 Skip it like a null option,
-	 then exchange with previous non-options as if it were an option,
-	 then skip everything else like a non-option.  */
-
-      if (optind != argc && !strcmp (argv[optind], "--"))
-	{
-	  optind++;
-
-	  if (first_nonopt != last_nonopt && last_nonopt != optind)
-	    exchange ((char **) argv);
-	  else if (first_nonopt == last_nonopt)
-	    first_nonopt = optind;
-	  last_nonopt = argc;
-
-	  optind = argc;
-	}
-
-      /* If we have done all the ARGV-elements, stop the scan
-	 and back over any non-options that we skipped and permuted.  */
-
-      if (optind == argc)
-	{
-	  /* Set the next-arg-index to point at the non-options
-	     that we previously skipped, so the caller will digest them.  */
-	  if (first_nonopt != last_nonopt)
-	    optind = first_nonopt;
-	  return -1;
-	}
-
-      /* If we have come to a non-option and did not permute it,
-	 either stop the scan or describe it to the caller and pass it by.  */
-
-      if (NONOPTION_P)
-	{
-	  if (ordering == REQUIRE_ORDER)
-	    return -1;
-	  optarg = argv[optind++];
-	  return 1;
-	}
-
-      /* We have found another option-ARGV-element.
-	 Skip the initial punctuation.  */
-
-      nextchar = (argv[optind] + 1
-		  + (longopts != NULL && argv[optind][1] == '-'));
-    }
-
-  /* Decode the current option-ARGV-element.  */
-
-  /* Check whether the ARGV-element is a long option.
-
-     If long_only and the ARGV-element has the form "-f", where f is
-     a valid short option, don't consider it an abbreviated form of
-     a long option that starts with f.  Otherwise there would be no
-     way to give the -f short option.
-
-     On the other hand, if there's a long option "fubar" and
-     the ARGV-element is "-fu", do consider that an abbreviation of
-     the long option, just like "--fu", and not "-f" with arg "u".
-
-     This distinction seems to be the most useful approach.  */
-
-  if (longopts != NULL
-      && (argv[optind][1] == '-'
-	  || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
-    {
-      char *nameend;
-      const struct option *p;
-      const struct option *pfound = NULL;
-      int exact = 0;
-      int ambig = 0;
-      int indfound = -1;
-      int option_index;
-
-      for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
-	/* Do nothing.  */ ;
-
-      /* Test all long options for either exact match
-	 or abbreviated matches.  */
-      for (p = longopts, option_index = 0; p->name; p++, option_index++)
-	if (!strncmp (p->name, nextchar, nameend - nextchar))
-	  {
-	    if ((unsigned int) (nameend - nextchar)
-		== (unsigned int) strlen (p->name))
-	      {
-		/* Exact match found.  */
-		pfound = p;
-		indfound = option_index;
-		exact = 1;
-		break;
-	      }
-	    else if (pfound == NULL)
-	      {
-		/* First nonexact match found.  */
-		pfound = p;
-		indfound = option_index;
-	      }
-	    else if (long_only
-		     || pfound->has_arg != p->has_arg
-		     || pfound->flag != p->flag
-		     || pfound->val != p->val)
-	      /* Second or later nonexact match found.  */
-	      ambig = 1;
-	  }
-
-      if (ambig && !exact)
-	{
-	  if (print_errors)
-	    {
-#if defined _LIBC && defined USE_IN_LIBIO
-	      char *buf;
-
-	      __asprintf (&buf, _("%s: option `%s' is ambiguous\n"),
-			  argv[0], argv[optind]);
-
-	      if (_IO_fwide (stderr, 0) > 0)
-		__fwprintf (stderr, L"%s", buf);
-	      else
-		fputs (buf, stderr);
-
-	      free (buf);
-#else
-	      fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
-		       argv[0], argv[optind]);
-#endif
-	    }
-	  nextchar += strlen (nextchar);
-	  optind++;
-	  optopt = 0;
-	  return '?';
-	}
-
-      if (pfound != NULL)
-	{
-	  option_index = indfound;
-	  optind++;
-	  if (*nameend)
-	    {
-	      /* Don't test has_arg with >, because some C compilers don't
-		 allow it to be used on enums.  */
-	      if (pfound->has_arg)
-		optarg = nameend + 1;
-	      else
-		{
-		  if (print_errors)
-		    {
-#if defined _LIBC && defined USE_IN_LIBIO
-		      char *buf;
-#endif
-
-		      if (argv[optind - 1][1] == '-')
-			{
-			  /* --option */
-#if defined _LIBC && defined USE_IN_LIBIO
-			  __asprintf (&buf, _("\
-%s: option `--%s' doesn't allow an argument\n"),
-				      argv[0], pfound->name);
-#else
-			  fprintf (stderr, _("\
-%s: option `--%s' doesn't allow an argument\n"),
-				   argv[0], pfound->name);
-#endif
-			}
-		      else
-			{
-			  /* +option or -option */
-#if defined _LIBC && defined USE_IN_LIBIO
-			  __asprintf (&buf, _("\
-%s: option `%c%s' doesn't allow an argument\n"),
-				      argv[0], argv[optind - 1][0],
-				      pfound->name);
-#else
-			  fprintf (stderr, _("\
-%s: option `%c%s' doesn't allow an argument\n"),
-				   argv[0], argv[optind - 1][0], pfound->name);
-#endif
-			}
-
-#if defined _LIBC && defined USE_IN_LIBIO
-		      if (_IO_fwide (stderr, 0) > 0)
-			__fwprintf (stderr, L"%s", buf);
-		      else
-			fputs (buf, stderr);
-
-		      free (buf);
-#endif
-		    }
-
-		  nextchar += strlen (nextchar);
-
-		  optopt = pfound->val;
-		  return '?';
-		}
-	    }
-	  else if (pfound->has_arg == 1)
-	    {
-	      if (optind < argc)
-		optarg = argv[optind++];
-	      else
-		{
-		  if (print_errors)
-		    {
-#if defined _LIBC && defined USE_IN_LIBIO
-		      char *buf;
-
-		      __asprintf (&buf,
-				  _("%s: option `%s' requires an argument\n"),
-				  argv[0], argv[optind - 1]);
-
-		      if (_IO_fwide (stderr, 0) > 0)
-			__fwprintf (stderr, L"%s", buf);
-		      else
-			fputs (buf, stderr);
-
-		      free (buf);
-#else
-		      fprintf (stderr,
-			       _("%s: option `%s' requires an argument\n"),
-			       argv[0], argv[optind - 1]);
-#endif
-		    }
-		  nextchar += strlen (nextchar);
-		  optopt = pfound->val;
-		  return optstring[0] == ':' ? ':' : '?';
-		}
-	    }
-	  nextchar += strlen (nextchar);
-	  if (longind != NULL)
-	    *longind = option_index;
-	  if (pfound->flag)
-	    {
-	      *(pfound->flag) = pfound->val;
-	      return 0;
-	    }
-	  return pfound->val;
-	}
-
-      /* Can't find it as a long option.  If this is not getopt_long_only,
-	 or the option starts with '--' or is not a valid short
-	 option, then it's an error.
-	 Otherwise interpret it as a short option.  */
-      if (!long_only || argv[optind][1] == '-'
-	  || my_index (optstring, *nextchar) == NULL)
-	{
-	  if (print_errors)
-	    {
-#if defined _LIBC && defined USE_IN_LIBIO
-	      char *buf;
-#endif
-
-	      if (argv[optind][1] == '-')
-		{
-		  /* --option */
-#if defined _LIBC && defined USE_IN_LIBIO
-		  __asprintf (&buf, _("%s: unrecognized option `--%s'\n"),
-			      argv[0], nextchar);
-#else
-		  fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
-			   argv[0], nextchar);
-#endif
-		}
-	      else
-		{
-		  /* +option or -option */
-#if defined _LIBC && defined USE_IN_LIBIO
-		  __asprintf (&buf, _("%s: unrecognized option `%c%s'\n"),
-			      argv[0], argv[optind][0], nextchar);
-#else
-		  fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
-			   argv[0], argv[optind][0], nextchar);
-#endif
-		}
-
-#if defined _LIBC && defined USE_IN_LIBIO
-	      if (_IO_fwide (stderr, 0) > 0)
-		__fwprintf (stderr, L"%s", buf);
-	      else
-		fputs (buf, stderr);
-
-	      free (buf);
-#endif
-	    }
-	  nextchar = (char *) "";
-	  optind++;
-	  optopt = 0;
-	  return '?';
-	}
-    }
-
-  /* Look at and handle the next short option-character.  */
-
-  {
-    char c = *nextchar++;
-    char *temp = my_index (optstring, c);
-
-    /* Increment `optind' when we start to process its last character.  */
-    if (*nextchar == '\0')
-      ++optind;
-
-    if (temp == NULL || c == ':')
-      {
-	if (print_errors)
-	  {
-#if defined _LIBC && defined USE_IN_LIBIO
-	      char *buf;
-#endif
-
-	    if (posixly_correct)
-	      {
-		/* 1003.2 specifies the format of this message.  */
-#if defined _LIBC && defined USE_IN_LIBIO
-		__asprintf (&buf, _("%s: illegal option -- %c\n"),
-			    argv[0], c);
-#else
-		fprintf (stderr, _("%s: illegal option -- %c\n"), argv[0], c);
-#endif
-	      }
-	    else
-	      {
-#if defined _LIBC && defined USE_IN_LIBIO
-		__asprintf (&buf, _("%s: invalid option -- %c\n"),
-			    argv[0], c);
-#else
-		fprintf (stderr, _("%s: invalid option -- %c\n"), argv[0], c);
-#endif
-	      }
-
-#if defined _LIBC && defined USE_IN_LIBIO
-	    if (_IO_fwide (stderr, 0) > 0)
-	      __fwprintf (stderr, L"%s", buf);
-	    else
-	      fputs (buf, stderr);
-
-	    free (buf);
-#endif
-	  }
-	optopt = c;
-	return '?';
-      }
-    /* Convenience. Treat POSIX -W foo same as long option --foo */
-    if (temp[0] == 'W' && temp[1] == ';')
-      {
-	char *nameend;
-	const struct option *p;
-	const struct option *pfound = NULL;
-	int exact = 0;
-	int ambig = 0;
-	int indfound = 0;
-	int option_index;
-
-	/* This is an option that requires an argument.  */
-	if (*nextchar != '\0')
-	  {
-	    optarg = nextchar;
-	    /* If we end this ARGV-element by taking the rest as an arg,
-	       we must advance to the next element now.  */
-	    optind++;
-	  }
-	else if (optind == argc)
-	  {
-	    if (print_errors)
-	      {
-		/* 1003.2 specifies the format of this message.  */
-#if defined _LIBC && defined USE_IN_LIBIO
-		char *buf;
-
-		__asprintf (&buf, _("%s: option requires an argument -- %c\n"),
-			    argv[0], c);
-
-		if (_IO_fwide (stderr, 0) > 0)
-		  __fwprintf (stderr, L"%s", buf);
-		else
-		  fputs (buf, stderr);
-
-		free (buf);
-#else
-		fprintf (stderr, _("%s: option requires an argument -- %c\n"),
-			 argv[0], c);
-#endif
-	      }
-	    optopt = c;
-	    if (optstring[0] == ':')
-	      c = ':';
-	    else
-	      c = '?';
-	    return c;
-	  }
-	else
-	  /* We already incremented `optind' once;
-	     increment it again when taking next ARGV-elt as argument.  */
-	  optarg = argv[optind++];
-
-	/* optarg is now the argument, see if it's in the
-	   table of longopts.  */
-
-	for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++)
-	  /* Do nothing.  */ ;
-
-	/* Test all long options for either exact match
-	   or abbreviated matches.  */
-	for (p = longopts, option_index = 0; p->name; p++, option_index++)
-	  if (!strncmp (p->name, nextchar, nameend - nextchar))
-	    {
-	      if ((unsigned int) (nameend - nextchar) == strlen (p->name))
-		{
-		  /* Exact match found.  */
-		  pfound = p;
-		  indfound = option_index;
-		  exact = 1;
-		  break;
-		}
-	      else if (pfound == NULL)
-		{
-		  /* First nonexact match found.  */
-		  pfound = p;
-		  indfound = option_index;
-		}
-	      else
-		/* Second or later nonexact match found.  */
-		ambig = 1;
-	    }
-	if (ambig && !exact)
-	  {
-	    if (print_errors)
-	      {
-#if defined _LIBC && defined USE_IN_LIBIO
-		char *buf;
-
-		__asprintf (&buf, _("%s: option `-W %s' is ambiguous\n"),
-			    argv[0], argv[optind]);
-
-		if (_IO_fwide (stderr, 0) > 0)
-		  __fwprintf (stderr, L"%s", buf);
-		else
-		  fputs (buf, stderr);
-
-		free (buf);
-#else
-		fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
-			 argv[0], argv[optind]);
-#endif
-	      }
-	    nextchar += strlen (nextchar);
-	    optind++;
-	    return '?';
-	  }
-	if (pfound != NULL)
-	  {
-	    option_index = indfound;
-	    if (*nameend)
-	      {
-		/* Don't test has_arg with >, because some C compilers don't
-		   allow it to be used on enums.  */
-		if (pfound->has_arg)
-		  optarg = nameend + 1;
-		else
-		  {
-		    if (print_errors)
-		      {
-#if defined _LIBC && defined USE_IN_LIBIO
-			char *buf;
-
-			__asprintf (&buf, _("\
-%s: option `-W %s' doesn't allow an argument\n"),
-				    argv[0], pfound->name);
-
-			if (_IO_fwide (stderr, 0) > 0)
-			  __fwprintf (stderr, L"%s", buf);
-			else
-			  fputs (buf, stderr);
-
-			free (buf);
-#else
-			fprintf (stderr, _("\
-%s: option `-W %s' doesn't allow an argument\n"),
-				 argv[0], pfound->name);
-#endif
-		      }
-
-		    nextchar += strlen (nextchar);
-		    return '?';
-		  }
-	      }
-	    else if (pfound->has_arg == 1)
-	      {
-		if (optind < argc)
-		  optarg = argv[optind++];
-		else
-		  {
-		    if (print_errors)
-		      {
-#if defined _LIBC && defined USE_IN_LIBIO
-			char *buf;
-
-			__asprintf (&buf, _("\
-%s: option `%s' requires an argument\n"),
-				    argv[0], argv[optind - 1]);
-
-			if (_IO_fwide (stderr, 0) > 0)
-			  __fwprintf (stderr, L"%s", buf);
-			else
-			  fputs (buf, stderr);
-
-			free (buf);
-#else
-			fprintf (stderr,
-				 _("%s: option `%s' requires an argument\n"),
-				 argv[0], argv[optind - 1]);
-#endif
-		      }
-		    nextchar += strlen (nextchar);
-		    return optstring[0] == ':' ? ':' : '?';
-		  }
-	      }
-	    nextchar += strlen (nextchar);
-	    if (longind != NULL)
-	      *longind = option_index;
-	    if (pfound->flag)
-	      {
-		*(pfound->flag) = pfound->val;
-		return 0;
-	      }
-	    return pfound->val;
-	  }
-	  nextchar = NULL;
-	  return 'W';	/* Let the application handle it.   */
-      }
-    if (temp[1] == ':')
-      {
-	if (temp[2] == ':')
-	  {
-	    /* This is an option that accepts an argument optionally.  */
-	    if (*nextchar != '\0')
-	      {
-		optarg = nextchar;
-		optind++;
-	      }
-	    else
-	      optarg = NULL;
-	    nextchar = NULL;
-	  }
-	else
-	  {
-	    /* This is an option that requires an argument.  */
-	    if (*nextchar != '\0')
-	      {
-		optarg = nextchar;
-		/* If we end this ARGV-element by taking the rest as an arg,
-		   we must advance to the next element now.  */
-		optind++;
-	      }
-	    else if (optind == argc)
-	      {
-		if (print_errors)
-		  {
-		    /* 1003.2 specifies the format of this message.  */
-#if defined _LIBC && defined USE_IN_LIBIO
-		    char *buf;
-
-		    __asprintf (&buf,
-				_("%s: option requires an argument -- %c\n"),
-				argv[0], c);
-
-		    if (_IO_fwide (stderr, 0) > 0)
-		      __fwprintf (stderr, L"%s", buf);
-		    else
-		      fputs (buf, stderr);
-
-		    free (buf);
-#else
-		    fprintf (stderr,
-			     _("%s: option requires an argument -- %c\n"),
-			     argv[0], c);
-#endif
-		  }
-		optopt = c;
-		if (optstring[0] == ':')
-		  c = ':';
-		else
-		  c = '?';
-	      }
-	    else
-	      /* We already incremented `optind' once;
-		 increment it again when taking next ARGV-elt as argument.  */
-	      optarg = argv[optind++];
-	    nextchar = NULL;
-	  }
-      }
-    return c;
-  }
-}
-
-int
-getopt (argc, argv, optstring)
-     int argc;
-     char *const *argv;
-     const char *optstring;
-{
-  return _getopt_internal (argc, argv, optstring,
-			   (const struct option *) 0,
-			   (int *) 0,
-			   0);
-}
-
-
-#ifdef TEST
-
-/* Compile with -DTEST to make an executable for use in testing
-   the above definition of `getopt'.  */
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-{
-  int c;
-  int digit_optind = 0;
-
-  while (1)
-    {
-      int this_option_optind = optind ? optind : 1;
-
-      c = getopt (argc, argv, "abc:d:0123456789");
-      if (c == -1)
-	break;
-
-      switch (c)
-	{
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  if (digit_optind != 0 && digit_optind != this_option_optind)
-	    printf ("digits occur in two different argv-elements.\n");
-	  digit_optind = this_option_optind;
-	  printf ("option %c\n", c);
-	  break;
-
-	case 'a':
-	  printf ("option a\n");
-	  break;
-
-	case 'b':
-	  printf ("option b\n");
-	  break;
-
-	case 'c':
-	  printf ("option c with value `%s'\n", optarg);
-	  break;
-
-	case '?':
-	  break;
-
-	default:
-	  printf ("?? getopt returned character code 0%o ??\n", c);
-	}
-    }
-
-  if (optind < argc)
-    {
-      printf ("non-option ARGV-elements: ");
-      while (optind < argc)
-	printf ("%s ", argv[optind++]);
-      printf ("\n");
-    }
-
-  exit (0);
-}
-
-#endif /* TEST */
diff --git a/newlib/libc/sys/linux/getopt1.c b/newlib/libc/sys/linux/getopt1.c
deleted file mode 100644
index 2f149bcc4..000000000
--- a/newlib/libc/sys/linux/getopt1.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* getopt_long and getopt_long_only entry points for GNU getopt.
-   Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
-     Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include "getopt.h"
-
-#if !defined __STDC__ || !__STDC__
-/* This is a separate conditional since some stdc systems
-   reject `defined (const)'.  */
-#ifndef const
-#define const
-#endif
-#endif
-
-#include <stdio.h>
-
-/* Comment out all this code if we are using the GNU C Library, and are not
-   actually compiling the library itself.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#define GETOPT_INTERFACE_VERSION 2
-#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
-#include <gnu-versions.h>
-#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
-#define ELIDE_CODE
-#endif
-#endif
-
-
-/* This needs to come after some library #include
-   to get __GNU_LIBRARY__ defined.  */
-#ifdef __GNU_LIBRARY__
-#include <stdlib.h>
-#endif
-
-#ifndef	NULL
-#define NULL 0
-#endif
-
-int
-getopt_long (argc, argv, options, long_options, opt_index)
-     int argc;
-     char *const *argv;
-     const char *options;
-     const struct option *long_options;
-     int *opt_index;
-{
-  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
-}
-
-/* Like getopt_long, but '-' as well as '--' can indicate a long option.
-   If an option that starts with '-' (not '--') doesn't match a long option,
-   but does match a short option, it is parsed as a short option
-   instead.  */
-
-int
-getopt_long_only (argc, argv, options, long_options, opt_index)
-     int argc;
-     char *const *argv;
-     const char *options;
-     const struct option *long_options;
-     int *opt_index;
-{
-  return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
-}
-
-
-
-#ifdef TEST
-
-#include <stdio.h>
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-{
-  int c;
-  int digit_optind = 0;
-
-  while (1)
-    {
-      int this_option_optind = optind ? optind : 1;
-      int option_index = 0;
-      static struct option long_options[] =
-      {
-	{"add", 1, 0, 0},
-	{"append", 0, 0, 0},
-	{"delete", 1, 0, 0},
-	{"verbose", 0, 0, 0},
-	{"create", 0, 0, 0},
-	{"file", 1, 0, 0},
-	{0, 0, 0, 0}
-      };
-
-      c = getopt_long (argc, argv, "abc:d:0123456789",
-		       long_options, &option_index);
-      if (c == -1)
-	break;
-
-      switch (c)
-	{
-	case 0:
-	  printf ("option %s", long_options[option_index].name);
-	  if (optarg)
-	    printf (" with arg %s", optarg);
-	  printf ("\n");
-	  break;
-
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  if (digit_optind != 0 && digit_optind != this_option_optind)
-	    printf ("digits occur in two different argv-elements.\n");
-	  digit_optind = this_option_optind;
-	  printf ("option %c\n", c);
-	  break;
-
-	case 'a':
-	  printf ("option a\n");
-	  break;
-
-	case 'b':
-	  printf ("option b\n");
-	  break;
-
-	case 'c':
-	  printf ("option c with value `%s'\n", optarg);
-	  break;
-
-	case 'd':
-	  printf ("option d with value `%s'\n", optarg);
-	  break;
-
-	case '?':
-	  break;
-
-	default:
-	  printf ("?? getopt returned character code 0%o ??\n", c);
-	}
-    }
-
-  if (optind < argc)
-    {
-      printf ("non-option ARGV-elements: ");
-      while (optind < argc)
-	printf ("%s ", argv[optind++]);
-      printf ("\n");
-    }
-
-  exit (0);
-}
-
-#endif /* TEST */
diff --git a/newlib/libc/sys/linux/getpwnam.c b/newlib/libc/sys/linux/getpwnam.c
deleted file mode 100644
index c90562c5a..000000000
--- a/newlib/libc/sys/linux/getpwnam.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/* FIXME: dummy stub for now.  */
-#include <errno.h>
-#include <pwd.h>
-
-struct passwd *
-_DEFUN (getpwnam, (name),
-	_CONST char *name)
-{
-  errno = ENOSYS;
-  return NULL;
-}
-
diff --git a/newlib/libc/sys/linux/getpwuid.c b/newlib/libc/sys/linux/getpwuid.c
deleted file mode 100644
index 4e9fcb220..000000000
--- a/newlib/libc/sys/linux/getpwuid.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/* FIXME: dummy stub for now.  */
-#include <errno.h>
-#include <pwd.h>
-
-struct passwd *
-_DEFUN (getpwuid, (uid),
-	uid_t uid)
-{
-  errno = ENOSYS;
-  return NULL;
-}
-
diff --git a/newlib/libc/sys/linux/getreent.c b/newlib/libc/sys/linux/getreent.c
deleted file mode 100644
index 2d842073a..000000000
--- a/newlib/libc/sys/linux/getreent.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/* default function used by _REENT when not using multithreading */
-
-#include <reent.h>
-#include <machine/weakalias.h>
-
-struct _reent *
-__libc_getreent (void)
-{
-  return _impure_ptr;
-}
-weak_alias(__libc_getreent,__getreent)
-
diff --git a/newlib/libc/sys/linux/getrlimit64.c b/newlib/libc/sys/linux/getrlimit64.c
deleted file mode 100644
index dcd67cf56..000000000
--- a/newlib/libc/sys/linux/getrlimit64.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (C) 1991, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/resource.h>
-#include <sys/types.h>
-
-/* Put the soft and hard limits for RESOURCE in *RLIMITS.
-   Returns 0 if successful, -1 if not (and sets errno).  */
-int
-getrlimit64 (enum __rlimit_resource resource, struct rlimit64 *rlimits)
-{
-  struct rlimit rlimits32;
-
-  if (__getrlimit (resource, &rlimits32) < 0)
-    return -1;
-
-  if (rlimits32.rlim_cur == RLIM_INFINITY)
-    rlimits->rlim_cur = RLIM64_INFINITY;
-  else
-    rlimits->rlim_cur = rlimits32.rlim_cur;
-  if (rlimits32.rlim_max == RLIM_INFINITY)
-    rlimits->rlim_max = RLIM64_INFINITY;
-  else
-    rlimits->rlim_max = rlimits32.rlim_max;
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/getwd.c b/newlib/libc/sys/linux/getwd.c
deleted file mode 100644
index 72db33830..000000000
--- a/newlib/libc/sys/linux/getwd.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-
-char *
-getwd (char *buf)
-{
-  char tmp[MAXPATHLEN];
-
-  if (buf == NULL)
-    {
-      errno = EINVAL;
-      return NULL;
-    }
-
-  if (getcwd (tmp, MAXPATHLEN) == NULL)
-    return NULL;
-
-  return strncpy (buf, tmp, MAXPATHLEN);
-}
diff --git a/newlib/libc/sys/linux/hp-timing.h b/newlib/libc/sys/linux/hp-timing.h
deleted file mode 100644
index 0507f444c..000000000
--- a/newlib/libc/sys/linux/hp-timing.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <machine/hp-timing.h>
diff --git a/newlib/libc/sys/linux/iconv/Makefile.am b/newlib/libc/sys/linux/iconv/Makefile.am
deleted file mode 100644
index 732644062..000000000
--- a/newlib/libc/sys/linux/iconv/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -DGCONV_DIR='"$(pkglibdir)"' -DGCONV_PATH='"$(pkglibdir)"' -I$(srcdir) -I$(srcdir)/.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	iconv.h gconv.h \
-	iconv_open.c iconv.c iconv_close.c \
-	gconv_open.c gconv.c gconv_close.c \
-	gconv_db.c gconv_dl.c gconv_conf.c gconv_builtin.c \
-	gconv_simple.c gconv_trans.c gconv_cache.c
-
-libiconv_la_CFLAGS =
-libiconv_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libiconv.la
-libiconv_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
diff --git a/newlib/libc/sys/linux/iconv/Makefile.in b/newlib/libc/sys/linux/iconv/Makefile.in
deleted file mode 100644
index a20b37805..000000000
--- a/newlib/libc/sys/linux/iconv/Makefile.in
+++ /dev/null
@@ -1,375 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -DGCONV_DIR='"$(pkglibdir)"' -DGCONV_PATH='"$(pkglibdir)"' -I$(srcdir) -I$(srcdir)/.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	iconv.h gconv.h \
-	iconv_open.c iconv.c iconv_close.c \
-	gconv_open.c gconv.c gconv_close.c \
-	gconv_db.c gconv_dl.c gconv_conf.c gconv_builtin.c \
-	gconv_simple.c gconv_trans.c gconv_cache.c
-
-
-libiconv_la_CFLAGS = 
-libiconv_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libiconv.la
-@USE_LIBTOOL_TRUE@libiconv_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  iconv_open.$(OBJEXT) iconv.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@iconv_close.$(OBJEXT) gconv_open.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gconv.$(OBJEXT) gconv_close.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gconv_db.$(OBJEXT) gconv_dl.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gconv_conf.$(OBJEXT) gconv_builtin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gconv_simple.$(OBJEXT) gconv_trans.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gconv_cache.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libiconv_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libiconv_la_OBJECTS =  iconv_open.lo iconv.lo \
-@USE_LIBTOOL_TRUE@iconv_close.lo gconv_open.lo gconv.lo gconv_close.lo \
-@USE_LIBTOOL_TRUE@gconv_db.lo gconv_dl.lo gconv_conf.lo \
-@USE_LIBTOOL_TRUE@gconv_builtin.lo gconv_simple.lo gconv_trans.lo \
-@USE_LIBTOOL_TRUE@gconv_cache.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libiconv_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libiconv_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus iconv/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libiconv.la: $(libiconv_la_OBJECTS) $(libiconv_la_DEPENDENCIES)
-	$(LINK)  $(libiconv_la_LDFLAGS) $(libiconv_la_OBJECTS) $(libiconv_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = iconv
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/iconv/categories.def b/newlib/libc/sys/linux/iconv/categories.def
deleted file mode 100644
index 257fac73a..000000000
--- a/newlib/libc/sys/linux/iconv/categories.def
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Definition of all available locale categories and their items.  -*- C -*-
-   Copyright (C) 1995-2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* These definitions are used by the locale-related files in the C library
-   and the programs `localedef' and `locale'.
-
-   The general format of the descriptions is like this:
-
-     DEFINE_CATEGORY (ID, name, ( items ), setlocale-postload)
-
-   where items itself is an array of entries in the form
-
-     { ID, name, standard, value-type, min, max }
-
-   The usage of the load, check, output functions depends on the individual
-   program code which loads this file.
-
-   The various value types for the items are `string', `stringarray', `byte'
-   `bytearray', and `word'.  These cover all possible values in the current
-   locale definitions.  `min' and `max' can be individually used again.  */
-
-#ifndef NO_POSTLOAD
-#define NO_POSTLOAD NULL
-#endif
-
-DEFINE_CATEGORY
-(
- LC_COLLATE, "LC_COLLATE",
- (
-  DEFINE_ELEMENT (_NL_COLLATE_NRULES,           "collate-nrules",           std, word)
-  DEFINE_ELEMENT (_NL_COLLATE_RULESETS,         "collate-rulesets",         std, string)
-  DEFINE_ELEMENT (_NL_COLLATE_TABLEMB,          "collate-tablemb",          std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_WEIGHTMB,         "collate-weightmb",         std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_EXTRAMB,          "collate-extramb",          std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_INDIRECTMB,       "collate-indirectmb",       std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_TABLEWC,          "collate-tablewc",          std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_WEIGHTWC,         "collate-weightwc",         std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_EXTRAWC,          "collate-extrawc",          std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_INDIRECTWC,       "collate-indirectwc",       std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_SYMB_HASH_SIZEMB, "collate-symb-hash-sizemb", std, word)
-  DEFINE_ELEMENT (_NL_COLLATE_SYMB_TABLEMB,     "collate-symb-tablemb",     std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_SYMB_EXTRAMB,     "collate-symb-extramb",     std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_COLLSEQMB,        "collate-collseqmb",        std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_COLLSEQWC,        "collate-collseqwc",        std, wstring)
-  DEFINE_ELEMENT (_NL_COLLATE_CODESET,		"collate-codeset",	    std, string)
-  ), NO_POSTLOAD)
-
-
-/* The actual definition of ctype is meaningless here.  It is hard coded in
-   the code because it has to be handled very specially.  Only the names of
-   the functions and the value types are important.  */
-DEFINE_CATEGORY
-(
- LC_CTYPE, "LC_CTYPE",
- (
-  DEFINE_ELEMENT (_NL_CTYPE_CLASS,	  "ctype-class",        std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TOUPPER,      "ctype-toupper",      std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TOLOWER,      "ctype-tolower",      std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_CLASS32,      "ctype-class32",      std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_CLASS_NAMES,  "ctype-class-names",  std, stringlist, 10, 32)
-  DEFINE_ELEMENT (_NL_CTYPE_MAP_NAMES,	  "ctype-map-names",    std, stringlist, 2, 32)
-  DEFINE_ELEMENT (_NL_CTYPE_WIDTH,	  "ctype-width",        std, bytearray)
-  DEFINE_ELEMENT (_NL_CTYPE_MB_CUR_MAX,	  "ctype-mb-cur-max",   std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_CODESET_NAME, "charmap",		std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_TOUPPER32,    "ctype-toupper32",    std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TOLOWER32,    "ctype-tolower32",    std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_CLASS_OFFSET, "ctype-class-offset", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_MAP_OFFSET,   "ctype-map-offset",   std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS_MB_LEN, "ctype-indigits_mb-len", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS0_MB, "ctype-indigits0_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS1_MB, "ctype-indigits1_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS2_MB, "ctype-indigits2_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS3_MB, "ctype-indigits3_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS4_MB, "ctype-indigits4_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS5_MB, "ctype-indigits5_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS6_MB, "ctype-indigits6_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS7_MB, "ctype-indigits7_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS8_MB, "ctype-indigits8_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS9_MB, "ctype-indigits9_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS_WC_LEN, "ctype-indigits_wc-len", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS0_WC, "ctype-indigits0_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS1_WC, "ctype-indigits1_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS2_WC, "ctype-indigits2_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS3_WC, "ctype-indigits3_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS4_WC, "ctype-indigits4_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS5_WC, "ctype-indigits5_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS6_WC, "ctype-indigits6_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS7_WC, "ctype-indigits7_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS8_WC, "ctype-indigits8_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_INDIGITS9_WC, "ctype-indigits9_wc", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT0_MB, "ctype-outdigit0_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT1_MB, "ctype-outdigit1_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT2_MB, "ctype-outdigit2_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT3_MB, "ctype-outdigit3_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT4_MB, "ctype-outdigit4_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT5_MB, "ctype-outdigit5_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT6_MB, "ctype-outdigit6_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT7_MB, "ctype-outdigit7_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT8_MB, "ctype-outdigit8_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT9_MB, "ctype-outdigit9_mb", std, string)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT0_WC, "ctype-outdigit0_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT1_WC, "ctype-outdigit1_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT2_WC, "ctype-outdigit2_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT3_WC, "ctype-outdigit3_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT4_WC, "ctype-outdigit4_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT5_WC, "ctype-outdigit5_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT6_WC, "ctype-outdigit6_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT7_WC, "ctype-outdigit7_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT8_WC, "ctype-outdigit8_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_OUTDIGIT9_WC, "ctype-outdigit9_wc", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_TAB_SIZE, "ctype-translit-tab-size", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_FROM_IDX, "ctype-translit-from-idx", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_FROM_TBL, "ctype-translit-from-tbl", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_TO_IDX, "ctype-translit-to-idx", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_TO_TBL, "ctype-translit-to-tbl", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_DEFAULT_MISSING_LEN, "ctype-translit-default-missing-len", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_DEFAULT_MISSING, "ctype-translit-default-missing", std, wstring)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_IGNORE_LEN, "ctype-translit-ignore-len", std, word)
-  DEFINE_ELEMENT (_NL_CTYPE_TRANSLIT_IGNORE, "ctype-translit-ignore", std, string)
-  ), _nl_postload_ctype)
-
-
-DEFINE_CATEGORY
-(
- LC_MONETARY, "LC_MONETARY",
- (
-  DEFINE_ELEMENT (INT_CURR_SYMBOL,                     "int_curr_symbol",        std, string)
-  DEFINE_ELEMENT (CURRENCY_SYMBOL,                     "currency_symbol",        std, string)
-  DEFINE_ELEMENT (MON_DECIMAL_POINT,                   "mon_decimal_point",      std, string)
-  DEFINE_ELEMENT (MON_THOUSANDS_SEP,                   "mon_thousands_sep",      std, string)
-  DEFINE_ELEMENT (MON_GROUPING,                        "mon_grouping",           std, bytearray)
-  DEFINE_ELEMENT (POSITIVE_SIGN,                       "positive_sign",          std, string)
-  DEFINE_ELEMENT (NEGATIVE_SIGN,                       "negative_sign",          std, string)
-  DEFINE_ELEMENT (INT_FRAC_DIGITS,                     "int_frac_digits",        std, byte)
-  DEFINE_ELEMENT (FRAC_DIGITS,                         "frac_digits",            std, byte)
-  DEFINE_ELEMENT (P_CS_PRECEDES,                       "p_cs_precedes",          std, byte, 0, 1)
-  DEFINE_ELEMENT (P_SEP_BY_SPACE,                      "p_sep_by_space",         std, byte, 0, 2)
-  DEFINE_ELEMENT (N_CS_PRECEDES,                       "n_cs_precedes",          std, byte, 0, 1)
-  DEFINE_ELEMENT (N_SEP_BY_SPACE,                      "n_sep_by_space",         std, byte, 0, 2)
-  DEFINE_ELEMENT (P_SIGN_POSN,                         "p_sign_posn",            std, byte, 0, 4)
-  DEFINE_ELEMENT (N_SIGN_POSN,                         "n_sign_posn",            std, byte, 0, 4)
-  DEFINE_ELEMENT (__INT_P_CS_PRECEDES,                 "int_p_cs_precedes",      std, byte, 0, 1)
-  DEFINE_ELEMENT (__INT_P_SEP_BY_SPACE,                "int_p_sep_by_space",     std, byte, 0, 2)
-  DEFINE_ELEMENT (__INT_N_CS_PRECEDES,                 "int_n_cs_precedes",      std, byte, 0, 1)
-  DEFINE_ELEMENT (__INT_N_SEP_BY_SPACE,                "int_n_sep_by_space",     std, byte, 0, 2)
-  DEFINE_ELEMENT (__INT_P_SIGN_POSN,                   "int_p_sign_posn",        std, byte, 0, 4)
-  DEFINE_ELEMENT (__INT_N_SIGN_POSN,                   "int_n_sign_posn",        std, byte, 0, 4)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_CURR_SYMBOL,    "duo_int_curr_symbol",    std, string)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_CURRENCY_SYMBOL,    "duo_currency_symbol",    std, string)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_FRAC_DIGITS,    "duo_int_frac_digits",    std, byte)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_FRAC_DIGITS,        "duo_frac_digits",        std, byte)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_P_CS_PRECEDES,      "duo_p_cs_precedes",      std, byte, 0, 1)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_P_SEP_BY_SPACE,     "duo_p_sep_by_space",     std, byte, 0, 2)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_N_CS_PRECEDES,      "duo_n_cs_precedes",      std, byte, 0, 1)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_N_SEP_BY_SPACE,     "duo_n_sep_by_space",     std, byte, 0, 2)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_P_CS_PRECEDES,  "duo_int_p_cs_precedes",  std, byte, 0, 1)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_P_SEP_BY_SPACE, "duo_int_p_sep_by_space", std, byte, 0, 2)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_N_CS_PRECEDES,  "duo_int_n_cs_precedes",  std, byte, 0, 1)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_N_SEP_BY_SPACE, "duo_int_n_sep_by_space", std, byte, 0, 2)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_P_SIGN_POSN,        "duo_p_sign_posn",        std, byte, 0, 4)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_N_SIGN_POSN,        "duo_n_sign_posn",        std, byte, 0, 4)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_P_SIGN_POSN,    "duo_int_p_sign_posn",    std, byte, 0, 4)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_INT_N_SIGN_POSN,    "duo_int_n_sign_posn",    std, byte, 0, 4)
-  DEFINE_ELEMENT (_NL_MONETARY_UNO_VALID_FROM,         "uno_valid_from",         std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_UNO_VALID_TO,           "uno_valid_to",           std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_VALID_FROM,         "duo_valid_from",         std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_DUO_VALID_TO,           "duo_valid_to",           std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_CONVERSION_RATE,        "conversion_rate",         std, wordarray, 2, 2)
-  DEFINE_ELEMENT (_NL_MONETARY_DECIMAL_POINT_WC,       "monetary-decimal-point-wc", std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_THOUSANDS_SEP_WC,       "monetary-thousands-sep-wc", std, word)
-  DEFINE_ELEMENT (_NL_MONETARY_CODESET,		       "monetary-codeset",	    std, string)
-  ), NO_POSTLOAD)
-
-
-DEFINE_CATEGORY
-(
- LC_NUMERIC, "LC_NUMERIC",
- (
-  DEFINE_ELEMENT (DECIMAL_POINT, "decimal_point", std, string)
-  DEFINE_ELEMENT (THOUSANDS_SEP, "thousands_sep", std, string)
-  DEFINE_ELEMENT (GROUPING,      "grouping",      std, bytearray)
-  DEFINE_ELEMENT (_NL_NUMERIC_DECIMAL_POINT_WC, "numeric-decimal-point-wc", std, word)
-  DEFINE_ELEMENT (_NL_NUMERIC_THOUSANDS_SEP_WC, "numeric-thousands-sep-wc", std, word)
-  DEFINE_ELEMENT (_NL_NUMERIC_CODESET,		"numeric-codeset",	    std, string)
-
-  ), NO_POSTLOAD)
-
-
-DEFINE_CATEGORY
-(
- LC_TIME, "LC_TIME",
- (
-  DEFINE_ELEMENT (ABDAY_1,     "abday",       std, stringarray,  7,  7)
-  DEFINE_ELEMENT (DAY_1,       "day",         std, stringarray,  7,  7)
-  DEFINE_ELEMENT (ABMON_1,     "abmon",       std, stringarray, 12, 12)
-  DEFINE_ELEMENT (MON_1,       "mon",         std, stringarray, 12, 12)
-  DEFINE_ELEMENT (AM_STR,      "am_pm",       std, stringarray,  2,  2)
-  DEFINE_ELEMENT (D_T_FMT,     "d_t_fmt",     std, string)
-  DEFINE_ELEMENT (D_FMT,       "d_fmt",       std, string)
-  DEFINE_ELEMENT (T_FMT,       "t_fmt",       std, string)
-  DEFINE_ELEMENT (T_FMT_AMPM,  "t_fmt_ampm",  std, string)
-  DEFINE_ELEMENT (ERA,         "era",         opt, stringlist, 0, 100)
-  DEFINE_ELEMENT (ERA_YEAR,    "era_year",    opt, string)
-  DEFINE_ELEMENT (ERA_D_FMT,   "era_d_fmt",   opt, string)
-  DEFINE_ELEMENT (ALT_DIGITS,  "alt_digits",  opt, stringlist,  100, 100)
-  DEFINE_ELEMENT (ERA_D_T_FMT, "era_d_t_fmt", opt, string)
-  DEFINE_ELEMENT (ERA_T_FMT,   "era_t_fmt",   opt, string)
-  DEFINE_ELEMENT (_NL_TIME_ERA_NUM_ENTRIES,    "time-era-num-entries",    opt, word)
-  DEFINE_ELEMENT (_NL_TIME_ERA_ENTRIES,   "time-era-entries", opt, string)
-  DEFINE_ELEMENT (_NL_WABDAY_1,  "wide-abday",    std, wstringarray,  7,  7)
-  DEFINE_ELEMENT (_NL_WDAY_1,    "wide-day",      std, wstringarray,  7,  7)
-  DEFINE_ELEMENT (_NL_WABMON_1,  "wide-abmon",    std, wstringarray, 12, 12)
-  DEFINE_ELEMENT (_NL_WMON_1,    "wide-mon",      std, wstringarray, 12, 12)
-  DEFINE_ELEMENT (_NL_WAM_STR,   "wide-am_pm",    std, wstringarray,  2,  2)
-  DEFINE_ELEMENT (_NL_WD_T_FMT,  "wide-d_t_fmt",  std, wstring)
-  DEFINE_ELEMENT (_NL_WD_FMT,    "wide-d_fmt",    std, wstring)
-  DEFINE_ELEMENT (_NL_WT_FMT,    "wide-t_fmt",    std, wstring)
-  DEFINE_ELEMENT (_NL_WT_FMT_AMPM, "wide-t_fmt_ampm", std, wstring)
-  DEFINE_ELEMENT (_NL_WERA_YEAR,   "wide-era_year",    opt, wstring)
-  DEFINE_ELEMENT (_NL_WERA_D_FMT,  "wide-era_d_fmt",   opt, wstring)
-  DEFINE_ELEMENT (_NL_WALT_DIGITS,  "wide-alt_digits",  opt, wstringlist, 1000, 100)
-  DEFINE_ELEMENT (_NL_WERA_D_T_FMT, "wide-era_d_t_fmt", opt, wstring)
-  DEFINE_ELEMENT (_NL_WERA_T_FMT,   "wide-era_t_fmt",   opt, wstring)
-  DEFINE_ELEMENT (_NL_TIME_WEEK_NDAYS,      "week-ndays",          std, byte)
-  DEFINE_ELEMENT (_NL_TIME_WEEK_1STDAY,     "week-1stday",         std, word)
-  DEFINE_ELEMENT (_NL_TIME_WEEK_1STWEEK,    "week-1stweek",        std, byte)
-  DEFINE_ELEMENT (_NL_TIME_FIRST_WEEKDAY,   "first_weekday",       std, byte)
-  DEFINE_ELEMENT (_NL_TIME_FIRST_WORKDAY,   "first_workday",       std, byte)
-  DEFINE_ELEMENT (_NL_TIME_CAL_DIRECTION,   "cal_direction",       std, byte)
-  DEFINE_ELEMENT (_NL_TIME_TIMEZONE,        "timezone",            std, string)
-  DEFINE_ELEMENT (_DATE_FMT,                "date_fmt",            opt, string)
-  DEFINE_ELEMENT (_NL_W_DATE_FMT,           "wide-date_fmt",       opt, wstring)
-  DEFINE_ELEMENT (_NL_TIME_CODESET,	    "time-codeset",	   std, string)
-  ), _nl_postload_time)
-
-
-DEFINE_CATEGORY
-(
- LC_MESSAGES, "LC_MESSAGES",
- (
-  DEFINE_ELEMENT (YESEXPR, "yesexpr", std, string)
-  DEFINE_ELEMENT (NOEXPR,  "noexpr",  std, string)
-  DEFINE_ELEMENT (YESSTR,  "yesstr",  opt, string)
-  DEFINE_ELEMENT (NOSTR,   "nostr",   opt, string)
-  DEFINE_ELEMENT (_NL_MESSAGES_CODESET, "messages-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_PAPER, "LC_PAPER",
- (
-  DEFINE_ELEMENT (_NL_PAPER_HEIGHT, "height", std, word)
-  DEFINE_ELEMENT (_NL_PAPER_WIDTH,  "width",  std, word)
-  DEFINE_ELEMENT (_NL_PAPER_CODESET, "paper-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_NAME, "LC_NAME",
- (
-  DEFINE_ELEMENT (_NL_NAME_NAME_FMT,  "name_fmt",  std, string)
-  DEFINE_ELEMENT (_NL_NAME_NAME_GEN,  "name_gen",  std, string)
-  DEFINE_ELEMENT (_NL_NAME_NAME_MR,   "name_mr",   std, string)
-  DEFINE_ELEMENT (_NL_NAME_NAME_MRS,  "name_mrs",  std, string)
-  DEFINE_ELEMENT (_NL_NAME_NAME_MISS, "name_miss", std, string)
-  DEFINE_ELEMENT (_NL_NAME_NAME_MS,   "name_ms",   std, string)
-  DEFINE_ELEMENT (_NL_NAME_CODESET,   "name-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_ADDRESS, "LC_ADDRESS",
- (
-  DEFINE_ELEMENT (_NL_ADDRESS_POSTAL_FMT,      "postal_fmt",      std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_NAME,    "country_name",    std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_POST,    "country_post",    std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_AB2,     "country_ab2",     std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_AB3,     "country_ab3",     std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_CAR,     "country_car",     std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_NUM,     "country_num",     std, word)
-  DEFINE_ELEMENT (_NL_ADDRESS_COUNTRY_ISBN,    "country_isbn",    std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_LANG_NAME,       "lang_name",       std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_LANG_AB,         "lang_ab",         std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_LANG_TERM,       "lang_term",       std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_LANG_LIB,        "lang_lib",        std, string)
-  DEFINE_ELEMENT (_NL_ADDRESS_CODESET,	       "address-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_TELEPHONE, "LC_TELEPHONE",
- (
-  DEFINE_ELEMENT (_NL_TELEPHONE_TEL_INT_FMT, "tel_int_fmt", std, string)
-  DEFINE_ELEMENT (_NL_TELEPHONE_TEL_DOM_FMT, "tel_dom_fmt", std, string)
-  DEFINE_ELEMENT (_NL_TELEPHONE_INT_SELECT,  "int_select",  std, string)
-  DEFINE_ELEMENT (_NL_TELEPHONE_INT_PREFIX,  "int_prefix",  std, string)
-  DEFINE_ELEMENT (_NL_TELEPHONE_CODESET,     "telephone-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_MEASUREMENT, "LC_MEASUREMENT",
- (
-  DEFINE_ELEMENT (_NL_MEASUREMENT_MEASUREMENT, "measurement", std, byte)
-  DEFINE_ELEMENT (_NL_MEASUREMENT_CODESET,     "measurement-codeset", std, string)
-  ), NO_POSTLOAD)
-
-DEFINE_CATEGORY
-(
- LC_IDENTIFICATION, "LC_IDENTIFICATION",
- (
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_TITLE,        "title",        std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_SOURCE,       "source",       std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_ADDRESS,      "address",      std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_CONTACT,      "contact",      std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_EMAIL,        "email",        std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_TEL,          "tel",          std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_FAX,          "fax",          std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_LANGUAGE,     "language",     std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_TERRITORY,    "territory",    std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_AUDIENCE,     "audience",     std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_APPLICATION,  "applcation",   std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_ABBREVIATION, "abbreviation", std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_REVISION,     "revision",     std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_DATE,         "date",         std, string)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_CATEGORY,     "category",     std, stringarray, 13, 13)
-  DEFINE_ELEMENT (_NL_IDENTIFICATION_CODESET,	   "identification-codeset", std, string)
-  ), NO_POSTLOAD)
diff --git a/newlib/libc/sys/linux/iconv/dummy-repertoire.c b/newlib/libc/sys/linux/iconv/dummy-repertoire.c
deleted file mode 100644
index a195460f9..000000000
--- a/newlib/libc/sys/linux/iconv/dummy-repertoire.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* For iconv we don't have to handle repertoire maps.  Provide dummy
-   definitions to allow the use of linereader.c unchanged.  */
-#include <repertoire.h>
-
-
-uint32_t
-repertoire_find_value (const struct repertoire_t *repertoire, const char *name,
-		       size_t len)
-{
-  return ILLEGAL_CHAR_VALUE;
-}
-
-
-const char *
-repertoire_find_symbol (const struct repertoire_t *repertoire, uint32_t ucs)
-{
-  return NULL;
-}
diff --git a/newlib/libc/sys/linux/iconv/gconv.c b/newlib/libc/sys/linux/iconv/gconv.c
deleted file mode 100644
index b413e26c5..000000000
--- a/newlib/libc/sys/linux/iconv/gconv.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Convert characters in input buffer using conversion descriptor to
-   output buffer.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <gconv_int.h>
-#include <sys/param.h>
-#include <dlfcn.h>
-#include <stddef.h>
-
-int
-internal_function
-__gconv (__gconv_t cd, const unsigned char **inbuf,
-	 const unsigned char *inbufend, unsigned char **outbuf,
-	 unsigned char *outbufend, size_t *irreversible)
-{
-  size_t last_step;
-  int result;
-
-  if (cd == (__gconv_t) -1L)
-    return __GCONV_ILLEGAL_DESCRIPTOR;
-
-  last_step = cd->__nsteps - 1;
-
-  assert (irreversible != NULL);
-  *irreversible = 0;
-
-  cd->__data[last_step].__outbuf = outbuf != NULL ? *outbuf : NULL;
-  cd->__data[last_step].__outbufend = outbufend;
-
-  if (inbuf == NULL || *inbuf == NULL)
-    /* We just flush.  */
-    result = cd->__steps->__fct (cd->__steps, cd->__data, NULL, NULL, NULL,
-                                 irreversible,
-                                 cd->__data[last_step].__outbuf == NULL ? 2 : 1, 0);
-  else
-    {
-      const unsigned char *last_start;
-
-      assert (outbuf != NULL && *outbuf != NULL);
-
-      do
-	{
-	  last_start = *inbuf;
-	  result = cd->__steps->__fct (cd->__steps, cd->__data, inbuf, inbufend,
-				 NULL, irreversible, 0, 0);
-	}
-      while (result == __GCONV_EMPTY_INPUT && last_start != *inbuf
-	     && *inbuf + cd->__steps->__min_needed_from <= inbufend);
-    }
-
-  if (outbuf != NULL && *outbuf != NULL)
-    *outbuf = cd->__data[last_step].__outbuf;
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/iconv/gconv_builtin.c b/newlib/libc/sys/linux/iconv/gconv_builtin.c
deleted file mode 100644
index 45bd4e7e0..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_builtin.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Table for builtin transformation mapping.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <endian.h>
-#include <limits.h>
-#include <string.h>
-
-#include <gconv_int.h>
-
-#include <assert.h>
-
-
-static struct builtin_map
-{
-  const char *name;
-  __gconv_fct fct;
-
-  int min_needed_from;
-  int max_needed_from;
-  int min_needed_to;
-  int max_needed_to;
-
-} map[] =
-{
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT) \
-  {									      \
-    .name = Name,							      \
-    .fct = Fct,								      \
-									      \
-    .min_needed_from = MinF,						      \
-    .max_needed_from = MaxF,						      \
-    .min_needed_to = MinT,						      \
-    .max_needed_to = MaxT						      \
-  },
-#define BUILTIN_ALIAS(From, To)
-
-#include <gconv_builtin.h>
-};
-
-
-void
-internal_function
-__gconv_get_builtin_trans (const char *name, struct __gconv_step *step)
-{
-  size_t cnt;
-
-  for (cnt = 0; cnt < sizeof (map) / sizeof (map[0]); ++cnt)
-    if (strcmp (name, map[cnt].name) == 0)
-      break;
-
-  assert (cnt < sizeof (map) / sizeof (map[0]));
-
-  step->__fct = map[cnt].fct;
-  step->__init_fct = NULL;
-  step->__end_fct = NULL;
-  step->__shlib_handle = NULL;
-  step->__modname = NULL;
-
-  step->__min_needed_from = map[cnt].min_needed_from;
-  step->__max_needed_from = map[cnt].max_needed_from;
-  step->__min_needed_to = map[cnt].min_needed_to;
-  step->__max_needed_to = map[cnt].max_needed_to;
-
-  /* None of the builtin converters handles stateful encoding.  */
-  step->__stateful = 0;
-}
diff --git a/newlib/libc/sys/linux/iconv/gconv_builtin.h b/newlib/libc/sys/linux/iconv/gconv_builtin.h
deleted file mode 100644
index 1a9d8a80f..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_builtin.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* Builtin transformations.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-BUILTIN_ALIAS ("UCS4//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("UCS-4//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("UCS-4BE//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("CSUCS4//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("ISO-10646//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("10646-1:1993//", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("10646-1:1993/UCS4/", "ISO-10646/UCS4/")
-BUILTIN_ALIAS ("OSF00010104//", "ISO-10646/UCS4/") /* level 1 */
-BUILTIN_ALIAS ("OSF00010105//", "ISO-10646/UCS4/") /* level 2 */
-BUILTIN_ALIAS ("OSF00010106//", "ISO-10646/UCS4/") /* level 3 */
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "ISO-10646/UCS4/", 1, "=INTERNAL->ucs4",
-			__gconv_transform_internal_ucs4, 4, 4, 4, 4)
-BUILTIN_TRANSFORMATION ("ISO-10646/UCS4/", "INTERNAL", 1, "=ucs4->INTERNAL",
-			__gconv_transform_ucs4_internal, 4, 4, 4, 4)
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "UCS-4LE//", 1, "=INTERNAL->ucs4le",
-			__gconv_transform_internal_ucs4le, 4, 4, 4, 4)
-BUILTIN_TRANSFORMATION ("UCS-4LE//", "INTERNAL", 1, "=ucs4le->INTERNAL",
-			__gconv_transform_ucs4le_internal, 4, 4, 4, 4)
-
-BUILTIN_ALIAS ("WCHAR_T//", "INTERNAL")
-
-BUILTIN_ALIAS ("UTF8//", "ISO-10646/UTF8/")
-BUILTIN_ALIAS ("UTF-8//", "ISO-10646/UTF8/")
-BUILTIN_ALIAS ("ISO-IR-193//", "ISO-10646/UTF8/")
-BUILTIN_ALIAS ("OSF05010001//", "ISO-10646/UTF8/")
-BUILTIN_ALIAS ("ISO-10646/UTF-8/", "ISO-10646/UTF8/")
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "ISO-10646/UTF8/", 1, "=INTERNAL->utf8",
-			__gconv_transform_internal_utf8, 4, 4, 1, 6)
-
-BUILTIN_TRANSFORMATION ("ISO-10646/UTF8/", "INTERNAL", 1, "=utf8->INTERNAL",
-			__gconv_transform_utf8_internal, 1, 6, 4, 4)
-
-BUILTIN_ALIAS ("UCS2//", "ISO-10646/UCS2/")
-BUILTIN_ALIAS ("UCS-2//", "ISO-10646/UCS2/")
-BUILTIN_ALIAS ("OSF00010100//", "ISO-10646/UCS2/") /* level 1 */
-BUILTIN_ALIAS ("OSF00010101//", "ISO-10646/UCS2/") /* level 2 */
-BUILTIN_ALIAS ("OSF00010102//", "ISO-10646/UCS2/") /* level 3 */
-
-BUILTIN_TRANSFORMATION ("ISO-10646/UCS2/", "INTERNAL", 1, "=ucs2->INTERNAL",
-			__gconv_transform_ucs2_internal, 2, 2, 4, 4)
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "ISO-10646/UCS2/", 1, "=INTERNAL->ucs2",
-			__gconv_transform_internal_ucs2, 4, 4, 2, 2)
-
-
-BUILTIN_ALIAS ("ANSI_X3.4//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("ISO-IR-6//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("ANSI_X3.4-1986//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("ISO_646.IRV:1991//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("ASCII//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("ISO646-US//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("US-ASCII//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("US//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("IBM367//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("CP367//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("CSASCII//", "ANSI_X3.4-1968//")
-BUILTIN_ALIAS ("OSF00010020//", "ANSI_X3.4-1968//")
-
-BUILTIN_TRANSFORMATION ("ANSI_X3.4-1968//", "INTERNAL", 1, "=ascii->INTERNAL",
-			__gconv_transform_ascii_internal, 4, 4, 1, 1)
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "ANSI_X3.4-1968//", 1, "=INTERNAL->ascii",
-			__gconv_transform_internal_ascii, 4, 4, 1, 1)
-
-
-#if BYTE_ORDER == BIG_ENDIAN
-BUILTIN_ALIAS ("UNICODEBIG//", "ISO-10646/UCS2/")
-BUILTIN_ALIAS ("UCS-2BE//", "ISO-10646/UCS2/")
-
-BUILTIN_ALIAS ("UCS-2LE//", "UNICODELITTLE//")
-
-BUILTIN_TRANSFORMATION ("UNICODELITTLE//", "INTERNAL", 1,
-			"=ucs2reverse->INTERNAL",
-			__gconv_transform_ucs2reverse_internal, 2, 2, 4, 4)
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "UNICODELITTLE//", 1,
-			"=INTERNAL->ucs2reverse",
-			__gconv_transform_internal_ucs2reverse, 4, 4, 2, 2)
-#else
-BUILTIN_ALIAS ("UNICODELITTLE//", "ISO-10646/UCS2/")
-BUILTIN_ALIAS ("UCS-2LE//", "ISO-10646/UCS2/")
-
-BUILTIN_ALIAS ("UCS-2BE//", "UNICODEBIG//")
-
-BUILTIN_TRANSFORMATION ("UNICODEBIG//", "INTERNAL", 1,
-			"=ucs2reverse->INTERNAL",
-			__gconv_transform_ucs2reverse_internal, 2, 2, 4, 4)
-
-BUILTIN_TRANSFORMATION ("INTERNAL", "UNICODEBIG//", 1,
-			"=INTERNAL->ucs2reverse",
-			__gconv_transform_internal_ucs2reverse, 4, 4, 2, 2)
-#endif
diff --git a/newlib/libc/sys/linux/iconv/gconv_cache.c b/newlib/libc/sys/linux/iconv/gconv_cache.c
deleted file mode 100644
index c887be970..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_cache.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/* Cache handling for iconv modules.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <dlfcn.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-
-#include <gconv_int.h>
-#include <iconvconfig.h>
-
-#include "hash-string.h"
-
-void *__gconv_cache;
-static size_t cache_size;
-static int cache_malloced;
-
-
-int
-internal_function
-__gconv_load_cache (void)
-{
-  int fd;
-  struct stat64 st;
-  struct gconvcache_header *header;
-
-  /* We cannot use the cache if the GCONV_PATH environment variable is
-     set.  */
-  __gconv_path_envvar = getenv ("GCONV_PATH");
-  if (__gconv_path_envvar != NULL)
-    return -1;
-
-  /* See whether the cache file exists.  */
-  fd = open (GCONV_MODULES_CACHE, O_RDONLY);
-  if (__builtin_expect (fd, 0) == -1)
-    /* Not available.  */
-    return -1;
-
-#ifdef	_POSIX_ASYNC_IO
-  /* Get information about the file.  */
-  if (__builtin_expect (fstat64 (fd, &st), 0) < 0
-      /* We do not have to start looking at the file if it cannot contain
-	 at least the cache header.  */
-      || st.st_size < sizeof (struct gconvcache_header))
-    {
-#endif
-    close_and_exit:
-      close (fd);
-      return -1;
-#ifdef	_POSIX_ASYNC_IO
-    }
-#endif
-
-  /* Make the file content available.  */
-  cache_size = st.st_size;
-#ifdef _POSIX_MAPPED_FILES
-  __gconv_cache = mmap (NULL, cache_size, PROT_READ, MAP_SHARED, fd, 0);
-  if (__builtin_expect (__gconv_cache == MAP_FAILED, 0))
-#endif
-    {
-      size_t already_read;
-
-      __gconv_cache = malloc (cache_size);
-      if (__gconv_cache == NULL)
-	goto close_and_exit;
-
-      already_read = 0;
-      do
-	{
-	  ssize_t n = read (fd, (char *) __gconv_cache + already_read,
-			      cache_size - already_read);
-	  if (__builtin_expect (n, 0) == -1)
-	    {
-	      free (__gconv_cache);
-	      __gconv_cache = NULL;
-	      goto close_and_exit;
-	    }
-
-	  already_read += n;
-	}
-      while (already_read < cache_size);
-
-      cache_malloced = 1;
-    }
-
-  /* We don't need the file descriptor anymore.  */
-  close (fd);
-
-  /* Check the consistency.  */
-  header = (struct gconvcache_header *) __gconv_cache;
-  if (__builtin_expect (header->magic, GCONVCACHE_MAGIC) != GCONVCACHE_MAGIC
-      || __builtin_expect (header->string_offset >= cache_size, 0)
-      || __builtin_expect (header->hash_offset >= cache_size, 0)
-      || __builtin_expect (header->hash_size == 0, 0)
-      || __builtin_expect ((header->hash_offset
-			    + header->hash_size * sizeof (struct hash_entry))
-			   > cache_size, 0)
-      || __builtin_expect (header->module_offset >= cache_size, 0)
-      || __builtin_expect (header->otherconv_offset > cache_size, 0))
-    {
-      if (cache_malloced)
-	{
-	  free (__gconv_cache);
-	  cache_malloced = 0;
-	}
-#ifdef _POSIX_MAPPED_FILES
-      else
-	__munmap (__gconv_cache, cache_size);
-#endif
-      __gconv_cache = NULL;
-
-      return -1;
-    }
-
-  /* That worked.  */
-  return 0;
-}
-
-
-static int
-internal_function
-find_module_idx (const char *str, size_t *idxp)
-{
-  unsigned int idx;
-  unsigned int hval;
-  unsigned int hval2;
-  const struct gconvcache_header *header;
-  const char *strtab;
-  const struct hash_entry *hashtab;
-  unsigned int limit;
-
-  header = (const struct gconvcache_header *) __gconv_cache;
-  strtab = (char *) __gconv_cache + header->string_offset;
-  hashtab = (struct hash_entry *) ((char *) __gconv_cache
-				   + header->hash_offset);
-
-  hval = hash_string (str);
-  idx = hval % header->hash_size;
-  hval2 = 1 + hval % (header->hash_size - 2);
-
-  limit = cache_size - header->string_offset;
-  while (hashtab[idx].string_offset != 0)
-    if (hashtab[idx].string_offset < limit
-	&& strcmp (str, strtab + hashtab[idx].string_offset) == 0)
-      {
-	*idxp = hashtab[idx].module_idx;
-	return 0;
-      }
-    else
-      if ((idx += hval2) >= header->hash_size)
-	idx -= header->hash_size;
-
-  /* Nothing found.  */
-  return -1;
-}
-
-
-#ifndef STATIC_GCONV
-static int
-internal_function
-find_module (const char *directory, const char *filename,
-	     struct __gconv_step *result)
-{
-  size_t dirlen = strlen (directory);
-  size_t fnamelen = strlen (filename) + 1;
-  char fullname[dirlen + fnamelen];
-  int status = __GCONV_NOCONV;
-  char *tmp;
-
-  tmp = mempcpy (fullname, directory, dirlen);
-  tmp += dirlen;
-  memcpy (tmp, filename, fnamelen);
-
-  result->__shlib_handle = __gconv_find_shlib (fullname);
-  if (result->__shlib_handle != NULL)
-    {
-      status = __GCONV_OK;
-
-      result->__modname = NULL;
-      result->__fct = result->__shlib_handle->fct;
-      result->__init_fct = result->__shlib_handle->init_fct;
-      result->__end_fct = result->__shlib_handle->end_fct;
-
-      result->__data = NULL;
-      if (result->__init_fct != NULL)
-	status = result->__init_fct (result);
-    }
-
-  return status;
-}
-#endif
-
-
-int
-internal_function
-__gconv_compare_alias_cache (const char *name1, const char *name2, int *result)
-{
-  size_t name1_idx;
-  size_t name2_idx;
-
-  if (__gconv_cache == NULL)
-    return -1;
-
-  if (find_module_idx (name1, &name1_idx) != 0
-      || find_module_idx (name2, &name2_idx) != 0)
-    *result = strcmp (name1, name2);
-  else
-    *result = (int) (name1_idx - name2_idx);
-
-  return 0;
-}
-
-
-int
-internal_function
-__gconv_lookup_cache (const char *toset, const char *fromset,
-		      struct __gconv_step **handle, size_t *nsteps, int flags)
-{
-  const struct gconvcache_header *header;
-  const char *strtab;
-  size_t fromidx;
-  size_t toidx;
-  const struct module_entry *modtab;
-  const struct module_entry *from_module;
-  const struct module_entry *to_module;
-  struct __gconv_step *result;
-
-  if (__gconv_cache == NULL)
-    /* We have no cache available.  */
-    return __GCONV_NODB;
-
-  header = (const struct gconvcache_header *) __gconv_cache;
-  strtab = (char *) __gconv_cache + header->string_offset;
-  modtab = (const struct module_entry *) ((char *) __gconv_cache
-					  + header->module_offset);
-
-  if (find_module_idx (fromset, &fromidx) != 0
-      || (header->module_offset + (fromidx + 1) * sizeof (struct module_entry)
-	  > cache_size))
-    return __GCONV_NOCONV;
-  from_module = &modtab[fromidx];
-
-  if (find_module_idx (toset, &toidx) != 0
-      || (header->module_offset + (toidx + 1) * sizeof (struct module_entry)
-	  > cache_size))
-    return __GCONV_NOCONV;
-  to_module = &modtab[toidx];
-
-  /* Avoid copy-only transformations if the user requests.   */
-  if (__builtin_expect (flags & GCONV_AVOID_NOCONV, 0) && fromidx == toidx)
-    return __GCONV_NOCONV;
-
-  /* If there are special conversions available examine them first.  */
-  if (fromidx != 0 && toidx != 0
-      && __builtin_expect (from_module->extra_offset, 0) != 0)
-    {
-      /* Search through the list to see whether there is a module
-	 matching the destination character set.  */
-      const struct extra_entry *extra;
-
-      /* Note the -1.  This is due to the offset added in iconvconfig.
-	 See there for more explanations.  */
-      extra = (const struct extra_entry *) ((char *) __gconv_cache
-					    + header->otherconv_offset
-					    + from_module->extra_offset - 1);
-      while (extra->module_cnt != 0
-	     && extra->module[extra->module_cnt - 1].outname_offset != toidx)
-	extra = (const struct extra_entry *) ((char *) extra
-					      + sizeof (struct extra_entry)
-					      + (extra->module_cnt
-						 * sizeof (struct extra_entry_module)));
-
-      if (extra->module_cnt != 0)
-	{
-	  /* Use the extra module.  First determine how many steps.  */
-	  char *fromname;
-	  int idx;
-
-	  *nsteps = extra->module_cnt;
-	  *handle = result =
-	    (struct __gconv_step *) malloc (extra->module_cnt
-					    * sizeof (struct __gconv_step));
-	  if (result == NULL)
-	    return __GCONV_NOMEM;
-
-	  fromname = (char *) strtab + from_module->canonname_offset;
-	  idx = 0;
-	  do
-	    {
-	      result[idx].__from_name = fromname;
-	      fromname = result[idx].__to_name =
-		(char *) strtab + modtab[extra->module[idx].outname_offset].canonname_offset;
-
-	      result[idx].__counter = 1;
-	      result[idx].__data = NULL;
-
-#ifndef STATIC_GCONV
-	      if (strtab[extra->module[idx].dir_offset] != '\0')
-		{
-		  /* Load the module, return handle for it.  */
-		  int res;
-
-		  res = find_module (strtab + extra->module[idx].dir_offset,
-				     strtab + extra->module[idx].name_offset,
-				     &result[idx]);
-		  if (__builtin_expect (res, __GCONV_OK) != __GCONV_OK)
-		    {
-		      /* Something went wrong.  */
-		      free (result);
-		      goto try_internal;
-		    }
-		}
-	      else
-#endif
-		/* It's a builtin transformation.  */
-		__gconv_get_builtin_trans (strtab
-					   + extra->module[idx].name_offset,
-					   &result[idx]);
-
-	    }
-	  while (++idx < extra->module_cnt);
-
-	  return __GCONV_OK;
-	}
-    }
-
- try_internal:
-  /* See whether we can convert via the INTERNAL charset.  */
-  if ((fromidx != 0 && __builtin_expect (from_module->fromname_offset, 1) == 0)
-      || (toidx != 0 && __builtin_expect (to_module->toname_offset, 1) == 0)
-      || (fromidx == 0 && toidx == 0))
-    /* Not possible.  Nothing we can do.  */
-    return __GCONV_NOCONV;
-
-  /* We will use up to two modules.  Always allocate room for two.  */
-  result = (struct __gconv_step *) malloc (2 * sizeof (struct __gconv_step));
-  if (result == NULL)
-    return __GCONV_NOMEM;
-
-  *handle = result;
-  *nsteps = 0;
-
-  /* Generate data structure for conversion to INTERNAL.  */
-  if (fromidx != 0)
-    {
-      result[0].__from_name = (char *) strtab + from_module->canonname_offset;
-      result[0].__to_name = (char *) "INTERNAL";
-
-      result[0].__counter = 1;
-      result[0].__data = NULL;
-
-#ifndef STATIC_GCONV
-      if (strtab[from_module->todir_offset] != '\0')
-	{
-	  /* Load the module, return handle for it.  */
-	  int res = find_module (strtab + from_module->todir_offset,
-				 strtab + from_module->toname_offset,
-				 &result[0]);
-	  if (__builtin_expect (res, __GCONV_OK) != __GCONV_OK)
-	    {
-	      /* Something went wrong.  */
-	      free (result);
-	      return res;
-	    }
-	}
-      else
-#endif
-	/* It's a builtin transformation.  */
-	__gconv_get_builtin_trans (strtab + from_module->toname_offset,
-				   &result[0]);
-
-      ++*nsteps;
-    }
-
-  /* Generate data structure for conversion from INTERNAL.  */
-  if (toidx != 0)
-    {
-      int idx = *nsteps;
-
-      result[idx].__from_name = (char *) "INTERNAL";
-      result[idx].__to_name = (char *) strtab + to_module->canonname_offset;
-
-      result[idx].__counter = 1;
-      result[idx].__data = NULL;
-
-#ifndef STATIC_GCONV
-      if (strtab[to_module->fromdir_offset] != '\0')
-	{
-	  /* Load the module, return handle for it.  */
-	  int res = find_module (strtab + to_module->fromdir_offset,
-				 strtab + to_module->fromname_offset,
-				 &result[idx]);
-	  if (__builtin_expect (res, __GCONV_OK) != __GCONV_OK)
-	    {
-	      /* Something went wrong.  */
-	      if (idx != 0)
-		__gconv_release_step (&result[0]);
-	      free (result);
-	      return res;
-	    }
-	}
-      else
-#endif
-	/* It's a builtin transformation.  */
-	__gconv_get_builtin_trans (strtab + to_module->fromname_offset,
-				   &result[idx]);
-
-      ++*nsteps;
-    }
-
-  return __GCONV_OK;
-}
-
-
-/* Free memory allocated for the transformation record.  */
-void
-internal_function
-__gconv_release_cache (struct __gconv_step *steps, size_t nsteps)
-{
-  if (__gconv_cache != NULL)
-    /* The only thing we have to deallocate is the record with the
-       steps.  */
-    free (steps);
-}
-
-
-/* Free all resources if necessary.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  if (cache_malloced)
-    free (__gconv_cache);
-#ifdef _POSIX_MAPPED_FILES
-  else
-    __munmap (__gconv_cache, cache_size);
-#endif
-}
-
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/iconv/gconv_charset.h b/newlib/libc/sys/linux/iconv/gconv_charset.h
deleted file mode 100644
index 706669825..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_charset.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Charset name normalization.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <ctype.h>
-#include <locale.h>
-
-
-static inline void
-strip (char *wp, const char *s)
-{
-  int slash_count = 0;
-  char old_locale[20], *old_locale_p;
-
-  /* Set locale to default C locale. */
-  old_locale_p = setlocale(LC_ALL, "C");
-  strncpy(old_locale, old_locale_p, 20);
-  while (*s != '\0')
-    {
-      if (isalnum (*s)
-	  || *s == '_' || *s == '-' || *s == '.')
-	*wp++ = toupper (*s);
-      else if (*s == '/')
-	{
-	  if (++slash_count == 3)
-	    break;
-	  *wp++ = '/';
-	}
-      ++s;
-    }
-
-  while (slash_count++ < 2)
-    *wp++ = '/';
-
-  *wp = '\0';
-  setlocale(LC_ALL, old_locale);
-}
-
-
-static char * __attribute__ ((unused))
-upstr (char *dst, const char *str)
-{
-  char *cp = dst;
-  char old_locale[20], *old_locale_p;
-  /* Set locale to default C locale. */
-  old_locale_p = setlocale(LC_ALL, "C");
-  strncpy(old_locale, old_locale_p, 20);
-  while ((*cp++ = toupper (*str++)) != '\0')
-    /* nothing */;
-  setlocale(LC_ALL, old_locale);
-  return dst;
-}
-
-
-/* If NAME is an codeset alias expand it.  */
-extern int __gconv_compare_alias (const char *name1, const char *name2)
-     internal_function;
diff --git a/newlib/libc/sys/linux/iconv/gconv_close.c b/newlib/libc/sys/linux/iconv/gconv_close.c
deleted file mode 100644
index cc0ecd650..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_close.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Release any resource associated with given conversion descriptor.
-   Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdlib.h>
-
-#include <gconv_int.h>
-
-
-int
-internal_function
-__gconv_close (__gconv_t cd)
-{
-  struct __gconv_step *srunp;
-  struct __gconv_step_data *drunp;
-  size_t nsteps;
-
-  /* Free all resources by calling destructor functions and release
-     the implementations.  */
-  srunp = cd->__steps;
-  nsteps = cd->__nsteps;
-  drunp = cd->__data;
-  do
-    {
-      struct __gconv_trans_data *transp;
-
-      transp = drunp->__trans;
-      while (transp != NULL)
-	{
-	  struct __gconv_trans_data *curp = transp;
-	  transp = transp->__next;
-
-	  if (__builtin_expect (curp->__trans_end_fct != NULL, 0))
-	    curp->__trans_end_fct (curp->__data);
-
-	  free (curp);
-	}
-
-      if (!(drunp->__flags & __GCONV_IS_LAST) && drunp->__outbuf != NULL)
-	free (drunp->__outbuf);
-    }
-  while (!((drunp++)->__flags & __GCONV_IS_LAST));
-
-  /* Free the data allocated for the descriptor.  */
-  free (cd);
-
-  /* Close the participating modules.  */
-  return __gconv_close_transform (srunp, nsteps);
-}
diff --git a/newlib/libc/sys/linux/iconv/gconv_conf.c b/newlib/libc/sys/linux/iconv/gconv_conf.c
deleted file mode 100644
index c714102a3..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_conf.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/* Handle configuration data.
-   Copyright (C) 1997,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <ctype.h>
-#include <errno.h>
-#include <limits.h>
-#include <locale.h>
-#include <search.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdio_ext.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/param.h>
-
-#include <dirent.h>
-#include <gconv_int.h>
-
-/* This is the default path where we look for module lists.  */
-static const char default_gconv_path[] = GCONV_PATH;
-
-/* The path elements, as determined by the __gconv_get_path function.
-   All path elements end in a slash.  */
-struct path_elem *__gconv_path_elem;
-/* Maximum length of a single path element in __gconv_path_elem.  */
-size_t __gconv_max_path_elem_len;
-
-/* We use the following struct if we couldn't allocate memory.  */
-static const struct path_elem empty_path_elem;
-
-/* Name of the file containing the module information in the directories
-   along the path.  */
-static const char gconv_conf_filename[] = "gconv-modules";
-
-/* Filename extension for the modules.  */
-#ifndef MODULE_EXT
-# define MODULE_EXT ".so"
-#endif
-static const char gconv_module_ext[] = MODULE_EXT;
-
-/* We have a few builtin transformations.  */
-static struct gconv_module builtin_modules[] =
-{
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT) \
-  {									      \
-    from_string: From,							      \
-    to_string: To,							      \
-    cost_hi: Cost,							      \
-    cost_lo: INT_MAX,							      \
-    module_name: Name							      \
-  },
-#define BUILTIN_ALIAS(From, To)
-
-#include "gconv_builtin.h"
-};
-
-#undef BUILTIN_TRANSFORMATION
-#undef BUILTIN_ALIAS
-
-static const char *builtin_aliases[] =
-{
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT)
-#define BUILTIN_ALIAS(From, To) From " " To,
-
-#include "gconv_builtin.h"
-};
-
-#ifdef USE_IN_LIBIO
-# include <libio/libioP.h>
-# define __getdelim(line, len, c, fp) _IO_getdelim (line, len, c, fp)
-#endif
-
-
-/* Value of the GCONV_PATH environment variable.  */
-const char *__gconv_path_envvar;
-
-
-/* Test whether there is already a matching module known.  */
-static int
-internal_function
-detect_conflict (const char *alias)
-{
-  struct gconv_module *node = __gconv_modules_db;
-
-  while (node != NULL)
-    {
-      int cmpres = strcmp (alias, node->from_string);
-
-      if (cmpres == 0)
-	/* We have a conflict.  */
-	return 1;
-      else if (cmpres < 0)
-	node = node->left;
-      else
-	node = node->right;
-    }
-
-  return node != NULL;
-}
-
-
-/* Add new alias.  */
-static inline void
-add_alias (char *rp, void *modules)
-{
-  /* We now expect two more string.  The strings are normalized
-     (converted to UPPER case) and strored in the alias database.  */
-  struct gconv_alias *new_alias;
-  char *from, *to, *wp;
-  char old_locale[20], *old_locale_p;
-
-  /* Set locale to default C locale. */
-  old_locale_p = setlocale(LC_ALL, "C");
-  strncpy(old_locale, old_locale_p, 20);
-
-  while (isspace (*rp))
-    ++rp;
-  from = wp = rp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (*rp == '\0')
-    {
-      setlocale(LC_ALL, old_locale);
-      /* There is no `to' string on the line.  Ignore it.  */
-      return;
-    }
-  *wp++ = '\0';
-  to = ++rp;
-  while (isspace (*rp))
-    ++rp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (to == wp)
-    {
-      setlocale(LC_ALL, old_locale);
-      /* No `to' string, ignore the line.  */
-      return;
-    }
-  *wp++ = '\0';
-
-  /* Test whether this alias conflicts with any available module.  */
-  if (detect_conflict (from))
-    {
-      setlocale(LC_ALL, old_locale);
-      /* It does conflict, don't add the alias.  */
-      return;
-    }
-
-  new_alias = (struct gconv_alias *) malloc (sizeof (struct gconv_alias) + (wp - from));
-  if (new_alias != NULL)
-    {
-      void **inserted;
-
-      new_alias->fromname = memcpy ((char *) new_alias
-				    + sizeof (struct gconv_alias),
-				    from, wp - from);
-      new_alias->toname = new_alias->fromname + (to - from);
-
-      inserted = (void **) tsearch (new_alias, &__gconv_alias_db,
-				      __gconv_alias_compare);
-      if (inserted == NULL || *inserted != new_alias)
-	/* Something went wrong, free this entry.  */
-	free (new_alias);
-    }
-  setlocale(LC_ALL, old_locale);
-}
-
-
-/* Insert a data structure for a new module in the search tree.  */
-static inline void
-internal_function
-insert_module (struct gconv_module *newp, int tobefreed)
-{
-  struct gconv_module **rootp = &__gconv_modules_db;
-
-  while (*rootp != NULL)
-    {
-      struct gconv_module *root = *rootp;
-      int cmpres;
-
-      cmpres = strcmp (newp->from_string, root->from_string);
-      if (cmpres == 0)
-	{
-	  /* Both strings are identical.  Insert the string at the
-	     end of the `same' list if it is not already there.  */
-	  while (strcmp (newp->from_string, root->from_string) != 0
-		 || strcmp (newp->to_string, root->to_string) != 0)
-	    {
-	      rootp = &root->same;
-	      root = *rootp;
-	      if (root == NULL)
-		break;
-	    }
-
-	  if (root != NULL)
-	    {
-	      /* This is a no new conversion.  But maybe the cost is
-		 better.  */
-	      if (newp->cost_hi < root->cost_hi
-		  || (newp->cost_hi == root->cost_hi
-		      && newp->cost_lo < root->cost_lo))
-		{
-		  newp->left = root->left;
-		  newp->right = root->right;
-		  newp->same = root->same;
-		  *rootp = newp;
-
-		  free (root);
-		}
-	      else if (tobefreed)
-		free (newp);
-	      return;
-	    }
-
-	  break;
-	}
-      else if (cmpres < 0)
-	rootp = &root->left;
-      else
-	rootp = &root->right;
-    }
-
-  /* Plug in the new node here.  */
-  *rootp = newp;
-}
-
-
-/* Add new module.  */
-static void
-internal_function
-add_module (char *rp, const char *directory, size_t dir_len, void **modules,
-	    size_t *nmodules, int modcounter)
-{
-  /* We expect now
-     1. `from' name
-     2. `to' name
-     3. filename of the module
-     4. an optional cost value
-  */
-  struct gconv_alias fake_alias;
-  struct gconv_module *new_module;
-  char *from, *to, *module, *wp;
-  int need_ext;
-  int cost_hi;
-  char old_locale[20], *old_locale_p;
-  char *old;
-  size_t len;
-  char *new;
-
-  /* Set locale to default C locale. */
-  old_locale_p = setlocale(LC_ALL, "C");
-  strncpy(old_locale, old_locale_p, 20);
-
-  while (isspace (*rp))
-    ++rp;
-  from = rp;
-  while (*rp != '\0' && !isspace (*rp))
-    {
-      *rp = toupper (*rp);
-      ++rp;
-    }
-  if (*rp == '\0')
-    {
-      setlocale(LC_ALL, old_locale);
-      return;
-    }
-  *rp++ = '\0';
-  to = wp = rp;
-  while (isspace (*rp))
-    {
-      setlocale(LC_ALL, old_locale);
-      ++rp;
-    }
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (*rp == '\0')
-    {
-      setlocale(LC_ALL, old_locale);
-      return;
-    }
-  *wp++ = '\0';
-  do
-    ++rp;
-  while (isspace (*rp));
-  module = wp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = *rp++;
-  if (*rp == '\0')
-    {
-      /* There is no cost, use one by default.  */
-      *wp++ = '\0';
-      cost_hi = 1;
-    }
-  else
-    {
-      /* There might be a cost value.  */
-      char *endp;
-
-      *wp++ = '\0';
-      cost_hi = strtol (rp, &endp, 10);
-      if (rp == endp || cost_hi < 1)
-	/* No useful information.  */
-	cost_hi = 1;
-    }
-
-  if (module[0] == '\0')
-    {
-      setlocale(LC_ALL, old_locale);
-      /* No module name given.  */
-      return;
-    }
-  if (module[0] == '/')
-    dir_len = 0;
-
-  /* See whether we must add the ending.  */
-  need_ext = 0;
-  if (wp - module < (ptrdiff_t) sizeof (gconv_module_ext)
-      || memcmp (wp - sizeof (gconv_module_ext), gconv_module_ext,
-		 sizeof (gconv_module_ext)) != 0)
-    /* We must add the module extension.  */
-    need_ext = sizeof (gconv_module_ext) - 1;
-
-  /* See whether we have already an alias with this name defined.  */
-  old = from;
-  len = strnlen (old, to - from);
-  new = (char *) alloca (len + 1);
-  new[len] = '\0';
-  fake_alias.fromname = (char *) memcpy (new, old, len);
-
-  if (tfind (&fake_alias, &__gconv_alias_db, __gconv_alias_compare) != NULL)
-    {
-      setlocale(LC_ALL, old_locale);
-      /* This module duplicates an alias.  */
-      return;
-    }
-
-  new_module = (struct gconv_module *) calloc (1,
-					       sizeof (struct gconv_module)
-					       + (wp - from)
-					       + dir_len + need_ext);
-  if (new_module != NULL)
-    {
-      char *tmp;
-
-      new_module->from_string = tmp = (char *) (new_module + 1);
-      tmp = memcpy (tmp, from, to - from);
-      tmp += (to - from);
-
-      new_module->to_string = tmp;
-      tmp = memcpy (tmp, to, module - to);
-      tmp += (module - to);
-
-      new_module->cost_hi = cost_hi;
-      new_module->cost_lo = modcounter;
-
-      new_module->module_name = tmp;
-
-      if (dir_len != 0)
-        {
-          tmp = memcpy (tmp, directory, dir_len);
-          tmp += dir_len;
-        }
-
-      tmp = memcpy (tmp, module, wp - module);
-      tmp += (wp - module);
-
-      if (need_ext)
-	memcpy (tmp - 1, gconv_module_ext, sizeof (gconv_module_ext));
-
-      /* Now insert the new module data structure in our search tree.  */
-      insert_module (new_module, 1);
-    }
-  setlocale(LC_ALL, old_locale);
-}
-
-
-/* Read the next configuration file.  */
-static void
-internal_function
-read_conf_file (const char *filename, const char *directory, size_t dir_len,
-		void **modules, size_t *nmodules)
-{
-  FILE *fp = fopen (filename, "r");
-  char *line = NULL;
-  size_t line_len = 0;
-  static int modcounter;
-  char old_locale[20], *old_locale_p;
-
-  /* Don't complain if a file is not present or readable, simply silently
-     ignore it.  */
-  if (fp == NULL)
-    return;
-
-  /* Set locale to default C locale. */
-  old_locale_p = setlocale(LC_ALL, "C");
-  strncpy(old_locale, old_locale_p, 20);
-
-  /* Process the known entries of the file.  Comments start with `#' and
-     end with the end of the line.  Empty lines are ignored.  */
-  while (!feof (fp))
-    {
-      char *rp, *endp, *word;
-      ssize_t n = __getdelim (&line, &line_len, '\n', fp);
-      if (n < 0)
-	/* An error occurred.  */
-	break;
-
-      rp = line;
-      /* Terminate the line (excluding comments or newline) by an NUL byte
-	 to simplify the following code.  */
-      endp = strchr (rp, '#');
-      if (endp != NULL)
-	*endp = '\0';
-      else
-	if (rp[n - 1] == '\n')
-	  rp[n - 1] = '\0';
-
-      while (isspace (*rp))
-	++rp;
-
-      /* If this is an empty line go on with the next one.  */
-      if (rp == endp)
-	continue;
-
-      word = rp;
-      while (*rp != '\0' && !isspace (*rp))
-	++rp;
-
-      if (rp - word == sizeof ("alias") - 1
-	  && memcmp (word, "alias", sizeof ("alias") - 1) == 0)
-	add_alias (rp, *modules);
-      else if (rp - word == sizeof ("module") - 1
-	       && memcmp (word, "module", sizeof ("module") - 1) == 0)
-	add_module (rp, directory, dir_len, modules, nmodules, modcounter++);
-      /* else */
-	/* Otherwise ignore the line.  */
-    }
-
-  free (line);
-
-  fclose (fp);
-
-  setlocale(LC_ALL, old_locale);
-}
-
-
-/* Determine the directories we are looking for data in.  */
-void
-__gconv_get_path (void)
-{
-  struct path_elem *result;
-  __LOCK_INIT(static, path_lock);
-
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(path_lock);
-#endif
-
-  /* Make sure there wasn't a second thread doing it already.  */
-  result = (struct path_elem *) __gconv_path_elem;
-  if (result == NULL)
-    {
-      /* Determine the complete path first.  */
-      char *gconv_path;
-      size_t gconv_path_len;
-      char *elem;
-      char *oldp;
-      char *cp;
-      int nelems;
-      char *cwd;
-      size_t cwdlen;
-
-      if (__gconv_path_envvar == NULL)
-	{
-          char * old = default_gconv_path;
-          size_t len = strlen (old) + 1;
-          char *new = (char *) alloca (len);
-
-	  /* No user-defined path.  Make a modifiable copy of the
-	     default path.  */
-          gconv_path = (char *) memcpy (new, old, len);
-	  gconv_path_len = sizeof (default_gconv_path);
-	  cwd = NULL;
-	  cwdlen = 0;
-	}
-      else
-	{
-	  /* Append the default path to the user-defined path.  */
-	  size_t user_len = strlen (__gconv_path_envvar);
-          char *tmp;
-
-	  gconv_path_len = user_len + 1 + sizeof (default_gconv_path);
-	  gconv_path = alloca (gconv_path_len);
-          tmp = memcpy (gconv_path, __gconv_path_envvar,
-                        user_len);
-          tmp += user_len;
-          memcpy (tmp, ":", 1);
-          tmp += 1;
-	  memcpy (tmp,
-                  default_gconv_path, sizeof (default_gconv_path));
-
-	  cwd = getcwd (NULL, 0);
-	  cwdlen = strlen (cwd);
-	}
-      assert (default_gconv_path[0] == '/');
-
-      /* In a first pass we calculate the number of elements.  */
-      oldp = NULL;
-      cp = strchr (gconv_path, ':');
-      nelems = 1;
-      while (cp != NULL)
-	{
-	  if (cp != oldp + 1)
-	    ++nelems;
-	  oldp = cp;
-	  cp =  strchr (cp + 1, ':');
-	}
-
-      /* Allocate the memory for the result.  */
-      result = (struct path_elem *) malloc ((nelems + 1)
-					    * sizeof (struct path_elem)
-					    + gconv_path_len + nelems
-					    + (nelems - 1) * (cwdlen + 1));
-      if (result != NULL)
-	{
-	  char *strspace = (char *) &result[nelems + 1];
-	  int n = 0;
-
-	  /* Separate the individual parts.  */
-	  __gconv_max_path_elem_len = 0;
-	  elem = strtok_r (gconv_path, ":", &gconv_path);
-	  assert (elem != NULL);
-	  do
-	    {
-	      result[n].name = strspace;
-	      if (elem[0] != '/')
-		{
-		  assert (cwd != NULL);
-		  strspace = memcpy (strspace, cwd, cwdlen);
-                  strspace += cwdlen;
-		  *strspace++ = '/';
-		}
-	      strspace = strcpy (strspace, elem);
-              while(*strspace != '\0') strspace++;
-
-	      if (strspace[-1] != '/')
-		*strspace++ = '/';
-
-	      result[n].len = strspace - result[n].name;
-	      if (result[n].len > __gconv_max_path_elem_len)
-		__gconv_max_path_elem_len = result[n].len;
-
-	      *strspace++ = '\0';
-	      ++n;
-	    }
-	  while ((elem = strtok_r (NULL, ":", &gconv_path)) != NULL);
-
-	  result[n].name = NULL;
-	  result[n].len = 0;
-	}
-
-      __gconv_path_elem = result ?: (struct path_elem *) &empty_path_elem;
-
-      if (cwd != NULL)
-	free (cwd);
-    }
-
-#ifdef HAVE_DD_LOCK
-  __lock_release(path_lock);
-#endif
-}
-
-
-/* Read all configuration files found in the user-specified and the default
-   path.  */
-void
-__gconv_read_conf (void)
-{
-  void *modules = NULL;
-  size_t nmodules = 0;
-  int save_errno = errno;
-  size_t cnt;
-  char *filename;
-  char *tmp;
-  const char *elem;
-  size_t elem_len;
-
-  /* First see whether we should use the cache.  */
-  if (__gconv_load_cache () == 0)
-    {
-      /* Yes, we are done.  */
-      __set_errno (save_errno);
-      return;
-    }
-
-#ifndef STATIC_GCONV
-  /* Find out where we have to look.  */
-  if (__gconv_path_elem == NULL)
-    __gconv_get_path ();
-
-  for (cnt = 0; __gconv_path_elem[cnt].name != NULL; ++cnt)
-    {
-      elem = __gconv_path_elem[cnt].name;
-      elem_len = __gconv_path_elem[cnt].len;
-
-      /* No slash needs to be inserted between elem and gconv_conf_filename;
-	 elem already ends in a slash.  */
-      filename = alloca (elem_len + sizeof (gconv_conf_filename));
-      tmp = memcpy (filename, elem, elem_len);
-      tmp += elem_len;
-      memcpy (tmp, gconv_conf_filename, sizeof (gconv_conf_filename));
-
-      /* Read the next configuration file.  */
-      read_conf_file (filename, elem, elem_len, &modules, &nmodules);
-    }
-#endif
-
-  /* Add the internal modules.  */
-  for (cnt = 0; cnt < sizeof (builtin_modules) / sizeof (builtin_modules[0]);
-       ++cnt)
-    {
-      struct gconv_alias fake_alias;
-
-      fake_alias.fromname = (char *) builtin_modules[cnt].from_string;
-
-      if (tfind (&fake_alias, &__gconv_alias_db, __gconv_alias_compare)
-	  != NULL)
-	/* It'll conflict so don't add it.  */
-	continue;
-
-      insert_module (&builtin_modules[cnt], 0);
-    }
-
-  /* Add aliases for builtin conversions.  */
-  cnt = sizeof (builtin_aliases) / sizeof (builtin_aliases[0]);
-  while (cnt > 0)
-    {
-      char * old = builtin_aliases[--cnt];
-      size_t len = strlen (old) + 1;
-      char *new = (char *) alloca (len);
-      char *copy = (char *) memcpy (new, old, len);
-
-      add_alias (copy, modules);
-    }
-
-  /* Restore the error number.  */
-  __set_errno (save_errno);
-}
-
-
-
-/* Free all resources if necessary.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  if (__gconv_path_elem != NULL && __gconv_path_elem != &empty_path_elem)
-    free ((void *) __gconv_path_elem);
-}
-
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/iconv/gconv_db.c b/newlib/libc/sys/linux/iconv/gconv_db.c
deleted file mode 100644
index 749995ee3..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_db.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/* Provide access to the collection of available transformation modules.
-   Copyright (C) 1997,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <limits.h>
-#include <search.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/param.h>
-#include <dirent.h>
-
-#include <dlfcn.h>
-#include <gconv_int.h>
-#include <gconv_charset.h>
-
-
-/* Simple data structure for alias mapping.  We have two names, `from'
-   and `to'.  */
-void *__gconv_alias_db;
-
-/* Array with available modules.  */
-struct gconv_module *__gconv_modules_db;
-
-/* We modify global data.   */
-__LOCK_INIT(static, lock);
-
-
-/* Function for searching alias.  */
-int
-__gconv_alias_compare (const void *p1, const void *p2)
-{
-  const struct gconv_alias *s1 = (const struct gconv_alias *) p1;
-  const struct gconv_alias *s2 = (const struct gconv_alias *) p2;
-  return strcmp (s1->fromname, s2->fromname);
-}
-
-
-/* To search for a derivation we create a list of intermediate steps.
-   Each element contains a pointer to the element which precedes it
-   in the derivation order.  */
-struct derivation_step
-{
-  const char *result_set;
-  size_t result_set_len;
-  int cost_lo;
-  int cost_hi;
-  struct gconv_module *code;
-  struct derivation_step *last;
-  struct derivation_step *next;
-};
-
-#define NEW_STEP(result, hi, lo, module, last_mod) \
-  ({ struct derivation_step *newp = alloca (sizeof (struct derivation_step)); \
-     newp->result_set = result;						      \
-     newp->result_set_len = strlen (result);				      \
-     newp->cost_hi = hi;						      \
-     newp->cost_lo = lo;						      \
-     newp->code = module;						      \
-     newp->last = last_mod;						      \
-     newp->next = NULL;							      \
-     newp; })
-
-
-/* If a specific transformation is used more than once we should not need
-   to start looking for it again.  Instead cache each successful result.  */
-struct known_derivation
-{
-  const char *from;
-  const char *to;
-  struct __gconv_step *steps;
-  size_t nsteps;
-};
-
-/* Compare function for database of found derivations.  */
-static int
-derivation_compare (const void *p1, const void *p2)
-{
-  const struct known_derivation *s1 = (const struct known_derivation *) p1;
-  const struct known_derivation *s2 = (const struct known_derivation *) p2;
-  int result;
-
-  result = strcmp (s1->from, s2->from);
-  if (result == 0)
-    result = strcmp (s1->to, s2->to);
-  return result;
-}
-
-/* The search tree for known derivations.  */
-static void *known_derivations;
-
-/* Look up whether given transformation was already requested before.  */
-static int
-internal_function
-derivation_lookup (const char *fromset, const char *toset,
-		   struct __gconv_step **handle, size_t *nsteps)
-{
-  struct known_derivation key = { fromset, toset, NULL, 0 };
-  struct known_derivation **result;
-
-  result = tfind (&key, &known_derivations, derivation_compare);
-
-  if (result == NULL)
-    return __GCONV_NOCONV;
-
-  *handle = (*result)->steps;
-  *nsteps = (*result)->nsteps;
-
-  /* Please note that we return GCONV_OK even if the last search for
-     this transformation was unsuccessful.  */
-  return __GCONV_OK;
-}
-
-/* Add new derivation to list of known ones.  */
-static void
-internal_function
-add_derivation (const char *fromset, const char *toset,
-		struct __gconv_step *handle, size_t nsteps)
-{
-  struct known_derivation *new_deriv;
-  size_t fromset_len = strlen (fromset) + 1;
-  size_t toset_len = strlen (toset) + 1;
-
-  new_deriv = (struct known_derivation *)
-    malloc (sizeof (struct known_derivation) + fromset_len + toset_len);
-  if (new_deriv != NULL)
-    {
-      char *tmp;
-      new_deriv->from = (char *) (new_deriv + 1);
-      tmp = memcpy (new_deriv + 1, fromset, fromset_len);
-      tmp += fromset_len;
-
-      new_deriv->to = memcpy (tmp,
-			      toset, toset_len);
-
-      new_deriv->steps = handle;
-      new_deriv->nsteps = nsteps;
-
-      if (tsearch (new_deriv, &known_derivations, derivation_compare)
-	  == NULL)
-	/* There is some kind of memory allocation problem.  */
-	free (new_deriv);
-    }
-  /* Please note that we don't complain if the allocation failed.  This
-     is not tragically but in case we use the memory debugging facilities
-     not all memory will be freed.  */
-}
-
-static void
-free_derivation (void *p)
-{
-  struct known_derivation *deriv = (struct known_derivation *) p;
-  size_t cnt;
-
-  for (cnt = 0; cnt < deriv->nsteps; ++cnt)
-    if (deriv->steps[cnt].__counter > 0
-	&& deriv->steps[cnt].__end_fct != NULL)
-      deriv->steps[cnt].__end_fct (&deriv->steps[cnt]);
-
-  /* Free the name strings.  */
-  free ((char *) deriv->steps[0].__from_name);
-  free ((char *) deriv->steps[deriv->nsteps - 1].__to_name);
-
-  free ((struct __gconv_step *) deriv->steps);
-  free (deriv);
-}
-
-
-/* Decrement the reference count for a single step in a steps array.  */
-void
-internal_function
-__gconv_release_step (struct __gconv_step *step)
-{
-  if (--step->__counter == 0)
-    {
-      /* Call the destructor.  */
-      if (step->__end_fct != NULL)
-	step->__end_fct (step);
-
-#ifndef STATIC_GCONV
-      /* Skip builtin modules; they are not reference counted.  */
-      if (step->__shlib_handle != NULL)
-	{
-	  /* Release the loaded module.  */
-	  __gconv_release_shlib (step->__shlib_handle);
-	  step->__shlib_handle = NULL;
-	}
-#endif
-    }
-}
-
-static int
-internal_function
-gen_steps (struct derivation_step *best, const char *toset,
-	   const char *fromset, struct __gconv_step **handle, size_t *nsteps)
-{
-  size_t step_cnt = 0;
-  struct __gconv_step *result;
-  struct derivation_step *current;
-  int status = __GCONV_NOMEM;
-
-  /* First determine number of steps.  */
-  for (current = best; current->last != NULL; current = current->last)
-    ++step_cnt;
-
-  result = (struct __gconv_step *) malloc (sizeof (struct __gconv_step)
-					   * step_cnt);
-  if (result != NULL)
-    {
-      int failed = 0;
-
-      status = __GCONV_OK;
-      *nsteps = step_cnt;
-      current = best;
-      while (step_cnt-- > 0)
-	{
-	  result[step_cnt].__from_name = (step_cnt == 0
-					  ? strdup (fromset)
-					  : (char *)current->last->result_set);
-	  result[step_cnt].__to_name = (step_cnt + 1 == *nsteps
-					? strdup (current->result_set)
-					: result[step_cnt + 1].__from_name);
-
-	  result[step_cnt].__counter = 1;
-	  result[step_cnt].__data = NULL;
-
-#ifndef STATIC_GCONV
-	  if (current->code->module_name[0] == '/')
-	    {
-	      /* Load the module, return handle for it.  */
-	      struct __gconv_loaded_object *shlib_handle =
-		__gconv_find_shlib (current->code->module_name);
-
-	      if (shlib_handle == NULL)
-		{
-		  failed = 1;
-		  break;
-		}
-
-	      result[step_cnt].__shlib_handle = shlib_handle;
-	      result[step_cnt].__modname = shlib_handle->name;
-	      result[step_cnt].__fct = shlib_handle->fct;
-	      result[step_cnt].__init_fct = shlib_handle->init_fct;
-	      result[step_cnt].__end_fct = shlib_handle->end_fct;
-
-	      /* Call the init function.  */
-	      if (result[step_cnt].__init_fct != NULL)
-		{
-		  status = result[step_cnt].__init_fct (&result[step_cnt]);
-
-		  if (__builtin_expect (status, __GCONV_OK) != __GCONV_OK)
-		    {
-		      failed = 1;
-		      /* Make sure we unload this modules.  */
-		      --step_cnt;
-		      result[step_cnt].__end_fct = NULL;
-		      break;
-		    }
-		}
-	    }
-	  else
-#endif
-	    /* It's a builtin transformation.  */
-	    __gconv_get_builtin_trans (current->code->module_name,
-				       &result[step_cnt]);
-
-	  current = current->last;
-	}
-
-      if (__builtin_expect (failed, 0) != 0)
-	{
-	  /* Something went wrong while initializing the modules.  */
-	  while (++step_cnt < *nsteps)
-	    __gconv_release_step (&result[step_cnt]);
-	  free (result);
-	  *nsteps = 0;
-	  *handle = NULL;
-	  if (status == __GCONV_OK)
-	    status = __GCONV_NOCONV;
-	}
-      else
-	*handle = result;
-    }
-  else
-    {
-      *nsteps = 0;
-      *handle = NULL;
-    }
-
-  return status;
-}
-
-
-#ifndef STATIC_GCONV
-static int
-internal_function
-increment_counter (struct __gconv_step *steps, size_t nsteps)
-{
-  /* Increment the user counter.  */
-  size_t cnt = nsteps;
-  int result = __GCONV_OK;
-
-  while (cnt-- > 0)
-    {
-      struct __gconv_step *step = &steps[cnt];
-
-      if (step->__counter++ == 0)
-	{
-	  /* Skip builtin modules.  */
-	  if (step->__modname != NULL)
-	    {
-	      /* Reopen a previously used module.  */
-	      step->__shlib_handle = __gconv_find_shlib (step->__modname);
-	      if (step->__shlib_handle == NULL)
-		{
-		  /* Oops, this is the second time we use this module
-		     (after unloading) and this time loading failed!?  */
-		  --step->__counter;
-		  while (++cnt < nsteps)
-		    __gconv_release_step (&steps[cnt]);
-		  result = __GCONV_NOCONV;
-		  break;
-		}
-
-	      /* The function addresses defined by the module may
-		 have changed.  */
-	      step->__fct = step->__shlib_handle->fct;
-	      step->__init_fct = step->__shlib_handle->init_fct;
-	      step->__end_fct = step->__shlib_handle->end_fct;
-	    }
-
-	  if (step->__init_fct != NULL)
-	    step->__init_fct (step);
-	}
-    }
-  return result;
-}
-#endif
-
-
-/* The main function: find a possible derivation from the `fromset' (either
-   the given name or the alias) to the `toset' (again with alias).  */
-static int
-internal_function
-find_derivation (const char *toset, const char *toset_expand,
-		 const char *fromset, const char *fromset_expand,
-		 struct __gconv_step **handle, size_t *nsteps)
-{
-  struct derivation_step *first, *current, **lastp, *solution = NULL;
-  int best_cost_hi = INT_MAX;
-  int best_cost_lo = INT_MAX;
-  int result;
-
-  /* Look whether an earlier call to `find_derivation' has already
-     computed a possible derivation.  If so, return it immediately.  */
-  result = derivation_lookup (fromset_expand ?: fromset, toset_expand ?: toset,
-			      handle, nsteps);
-  if (result == __GCONV_OK)
-    {
-#ifndef STATIC_GCONV
-      result = increment_counter (*handle, *nsteps);
-#endif
-      return result;
-    }
-
-  /* The task is to find a sequence of transformations, backed by the
-     existing modules - whether builtin or dynamically loadable -,
-     starting at `fromset' (or `fromset_expand') and ending at `toset'
-     (or `toset_expand'), and with minimal cost.
-
-     For computer scientists, this is a shortest path search in the
-     graph where the nodes are all possible charsets and the edges are
-     the transformations listed in __gconv_modules_db.
-
-     For now we use a simple algorithm with quadratic runtime behaviour.
-     A breadth-first search, starting at `fromset' and `fromset_expand'.
-     The list starting at `first' contains all nodes that have been
-     visited up to now, in the order in which they have been visited --
-     excluding the goal nodes `toset' and `toset_expand' which get
-     managed in the list starting at `solution'.
-     `current' walks through the list starting at `first' and looks
-     which nodes are reachable from the current node, adding them to
-     the end of the list [`first' or `solution' respectively] (if
-     they are visited the first time) or updating them in place (if
-     they have have already been visited).
-     In each node of either list, cost_lo and cost_hi contain the
-     minimum cost over any paths found up to now, starting at `fromset'
-     or `fromset_expand', ending at that node.  best_cost_lo and
-     best_cost_hi represent the minimum over the elements of the
-     `solution' list.  */
-
-  if (fromset_expand != NULL)
-    {
-      first = NEW_STEP (fromset_expand, 0, 0, NULL, NULL);
-      first->next = NEW_STEP (fromset, 0, 0, NULL, NULL);
-      lastp = &first->next->next;
-    }
-  else
-    {
-      first = NEW_STEP (fromset, 0, 0, NULL, NULL);
-      lastp = &first->next;
-    }
-
-  for (current = first; current != NULL; current = current->next)
-    {
-      /* Now match all the available module specifications against the
-         current charset name.  If any of them matches check whether
-         we already have a derivation for this charset.  If yes, use the
-         one with the lower costs.  Otherwise add the new charset at the
-         end.
-
-	 The module database is organized in a tree form which allows
-	 searching for prefixes.  So we search for the first entry with a
-	 matching prefix and any other matching entry can be found from
-	 this place.  */
-      struct gconv_module *node;
-
-      /* Maybe it is not necessary anymore to look for a solution for
-	 this entry since the cost is already as high (or higher) as
-	 the cost for the best solution so far.  */
-      if (current->cost_hi > best_cost_hi
-	  || (current->cost_hi == best_cost_hi
-	      && current->cost_lo >= best_cost_lo))
-	continue;
-
-      node = __gconv_modules_db;
-      while (node != NULL)
-	{
-	  int cmpres = strcmp (current->result_set, node->from_string);
-	  if (cmpres == 0)
-	    {
-	      /* Walk through the list of modules with this prefix and
-		 try to match the name.  */
-	      struct gconv_module *runp;
-
-	      /* Check all the modules with this prefix.  */
-	      runp = node;
-	      do
-		{
-		  const char *result_set = (strcmp (runp->to_string, "-") == 0
-					    ? (toset_expand ?: toset)
-					    : runp->to_string);
-		  int cost_hi = runp->cost_hi + current->cost_hi;
-		  int cost_lo = runp->cost_lo + current->cost_lo;
-		  struct derivation_step *step;
-
-		  /* We managed to find a derivation.  First see whether
-		     we have reached one of the goal nodes.  */
-		  if (strcmp (result_set, toset) == 0
-		      || (toset_expand != NULL
-			  && strcmp (result_set, toset_expand) == 0))
-		    {
-		      /* Append to the `solution' list if there
-			 is no entry with this name.  */
-		      for (step = solution; step != NULL; step = step->next)
-			if (strcmp (result_set, step->result_set) == 0)
-			  break;
-
-		      if (step == NULL)
-			{
-			  step = NEW_STEP (result_set,
-					   cost_hi, cost_lo,
-					   runp, current);
-			  step->next = solution;
-			  solution = step;
-			}
-		      else if (step->cost_hi > cost_hi
-			       || (step->cost_hi == cost_hi
-				   && step->cost_lo > cost_lo))
-			{
-			  /* A better path was found for the node,
-			     on the `solution' list.  */
-			  step->code = runp;
-			  step->last = current;
-			  step->cost_hi = cost_hi;
-			  step->cost_lo = cost_lo;
-			}
-
-		      /* Update best_cost accordingly.  */
-		      if (cost_hi < best_cost_hi
-			  || (cost_hi == best_cost_hi
-			      && cost_lo < best_cost_lo))
-			{
-			  best_cost_hi = cost_hi;
-			  best_cost_lo = cost_lo;
-			}
-		    }
-		  else if (cost_hi < best_cost_hi
-			   || (cost_hi == best_cost_hi
-			       && cost_lo < best_cost_lo))
-		    {
-		      /* Append at the end of the `first' list if there
-			 is no entry with this name.  */
-		      for (step = first; step != NULL; step = step->next)
-			if (strcmp (result_set, step->result_set) == 0)
-			  break;
-
-		      if (step == NULL)
-			{
-			  *lastp = NEW_STEP (result_set,
-					     cost_hi, cost_lo,
-					     runp, current);
-			  lastp = &(*lastp)->next;
-			}
-		      else if (step->cost_hi > cost_hi
-			       || (step->cost_hi == cost_hi
-				   && step->cost_lo > cost_lo))
-			{
-			  /* A better path was found for the node,
-			     on the `first' list.  */
-			  step->code = runp;
-			  step->last = current;
-
-			  /* Update the cost for all steps.  */
-			  for (step = first; step != NULL;
-			       step = step->next)
-			    /* But don't update the start nodes.  */
-			    if (step->code != NULL)
-			      {
-				struct derivation_step *back;
-				int hi, lo;
-
-				hi = step->code->cost_hi;
-				lo = step->code->cost_lo;
-
-				for (back = step->last; back->code != NULL;
-				     back = back->last)
-				  {
-				    hi += back->code->cost_hi;
-				    lo += back->code->cost_lo;
-				  }
-
-				step->cost_hi = hi;
-				step->cost_lo = lo;
-			      }
-
-			  /* Likewise for the nodes on the solution list.
-			     Also update best_cost accordingly.  */
-			  for (step = solution; step != NULL;
-			       step = step->next)
-			    {
-			      step->cost_hi = (step->code->cost_hi
-					       + step->last->cost_hi);
-			      step->cost_lo = (step->code->cost_lo
-					       + step->last->cost_lo);
-
-			      if (step->cost_hi < best_cost_hi
-				  || (step->cost_hi == best_cost_hi
-				      && step->cost_lo < best_cost_lo))
-				{
-				  best_cost_hi = step->cost_hi;
-				  best_cost_lo = step->cost_lo;
-				}
-			    }
-			}
-		    }
-
-		  runp = runp->same;
-		}
-	      while (runp != NULL);
-
-	      break;
-	    }
-	  else if (cmpres < 0)
-	    node = node->left;
-	  else
-	    node = node->right;
-	}
-    }
-
-  if (solution != NULL)
-    {
-      /* We really found a way to do the transformation.  */
-
-      /* Choose the best solution.  This is easy because we know that
-	 the solution list has at most length 2 (one for every possible
-	 goal node).  */
-      if (solution->next != NULL)
-	{
-	  struct derivation_step *solution2 = solution->next;
-
-	  if (solution2->cost_hi < solution->cost_hi
-	      || (solution2->cost_hi == solution->cost_hi
-		  && solution2->cost_lo < solution->cost_lo))
-	    solution = solution2;
-	}
-
-      /* Now build a data structure describing the transformation steps.  */
-      result = gen_steps (solution, toset_expand ?: toset,
-			  fromset_expand ?: fromset, handle, nsteps);
-    }
-  else
-    {
-      /* We haven't found a transformation.  Clear the result values.  */
-      *handle = NULL;
-      *nsteps = 0;
-    }
-
-  /* Add result in any case to list of known derivations.  */
-  add_derivation (fromset_expand ?: fromset, toset_expand ?: toset,
-		  *handle, *nsteps);
-
-  return result;
-}
-
-
-/* Control of initialization.  */
-__libc_once_define (static, once);
-
-
-static const char *
-do_lookup_alias (const char *name)
-{
-  struct gconv_alias key;
-  struct gconv_alias **found;
-
-  key.fromname = (char *) name;
-  found = tfind (&key, &__gconv_alias_db, __gconv_alias_compare);
-  return found != NULL ? (*found)->toname : NULL;
-}
-
-
-int
-internal_function
-__gconv_compare_alias (const char *name1, const char *name2)
-{
-  int result;
-
-  /* Ensure that the configuration data is read.  */
-  __libc_once (once, __gconv_read_conf);
-
-  if (__gconv_compare_alias_cache (name1, name2, &result) != 0)
-    result = strcmp (do_lookup_alias (name1) ?: name1,
-		     do_lookup_alias (name2) ?: name2);
-
-  return result;
-}
-
-
-int
-internal_function
-__gconv_find_transform (const char *toset, const char *fromset,
-			struct __gconv_step **handle, size_t *nsteps,
-			int flags)
-{
-  const char *fromset_expand;
-  const char *toset_expand;
-  int result;
-
-  /* Ensure that the configuration data is read.  */
-  __libc_once (once, __gconv_read_conf);
-
-  /* Acquire the lock.  */
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(lock);
-#endif
-
-  result = __gconv_lookup_cache (toset, fromset, handle, nsteps, flags);
-  if (result != __GCONV_NODB)
-    {
-      /* We have a cache and could resolve the request, successful or not.  */
-#ifdef HAVE_DD_LOCK
-      __lock_release(lock);
-#endif
-
-      return result;
-    }
-
-  /* If we don't have a module database return with an error.  */
-  if (__gconv_modules_db == NULL)
-    {
-#ifdef HAVE_DD_LOCK
-  __lock_release(lock);
-#endif
-
-      return __GCONV_NOCONV;
-    }
-
-  /* See whether the names are aliases.  */
-  fromset_expand = do_lookup_alias (fromset);
-  toset_expand = do_lookup_alias (toset);
-
-  if (__builtin_expect (flags & GCONV_AVOID_NOCONV, 0)
-      /* We are not supposed to create a pseudo transformation (means
-	 copying) when the input and output character set are the same.  */
-      && (strcmp (toset, fromset) == 0
-	  || (toset_expand != NULL && strcmp (toset_expand, fromset) == 0)
-	  || (fromset_expand != NULL
-	      && (strcmp (toset, fromset_expand) == 0
-		  || (toset_expand != NULL
-		      && strcmp (toset_expand, fromset_expand) == 0)))))
-    {
-      /* Both character sets are the same.  */
-#ifdef HAVE_DD_LOCK
-  __lock_release(lock);
-#endif
-
-      return __GCONV_NOCONV;
-    }
-
-  result = find_derivation (toset, toset_expand, fromset, fromset_expand,
-			    handle, nsteps);
-
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-  __lock_release(lock);
-#endif
-
-
-  /* The following code is necessary since `find_derivation' will return
-     GCONV_OK even when no derivation was found but the same request
-     was processed before.  I.e., negative results will also be cached.  */
-  return (result == __GCONV_OK
-	  ? (*handle == NULL ? __GCONV_NOCONV : __GCONV_OK)
-	  : result);
-}
-
-
-/* Release the entries of the modules list.  */
-int
-internal_function
-__gconv_close_transform (struct __gconv_step *steps, size_t nsteps)
-{
-  int result = __GCONV_OK;
-  size_t cnt;
-
-  /* Acquire the lock.  */
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(lock);
-#endif
-
-
-#ifndef STATIC_GCONV
-  cnt = nsteps;
-  while (cnt-- > 0)
-    __gconv_release_step (&steps[cnt]);
-#endif
-
-  /* If we use the cache we free a bit more since we don't keep any
-     transformation records around, they are cheap enough to
-     recreate.  */
-  __gconv_release_cache (steps, nsteps);
-
-  /* Release the lock.  */
-#ifdef HAVE_DD_LOCK
-  __lock_release(lock);
-#endif
-
-
-  return result;
-}
-
-
-/* Free the modules mentioned.  */
-static void
-internal_function
-free_modules_db (struct gconv_module *node)
-{
-  if (node->left != NULL)
-    free_modules_db (node->left);
-  if (node->right != NULL)
-    free_modules_db (node->right);
-  do
-    {
-      struct gconv_module *act = node;
-      node = node->same;
-      if (act->module_name[0] == '/')
-	free (act);
-    }
-  while (node != NULL);
-}
-
-
-/* Free all resources if necessary.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  if (__gconv_alias_db != NULL)
-    tdestroy (__gconv_alias_db, free);
-
-  if (__gconv_modules_db != NULL)
-    free_modules_db (__gconv_modules_db);
-
-  if (known_derivations != NULL)
-    tdestroy (known_derivations, free_derivation);
-}
-
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/iconv/gconv_dl.c b/newlib/libc/sys/linux/iconv/gconv_dl.c
deleted file mode 100644
index ee725149f..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_dl.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* Handle loading/unloading of shared object for transformation.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <dlfcn.h>
-#include <search.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bits/libc-lock.h>
-#include <sys/param.h>
-#include <ltdl.h>
-
-#include <gconv_int.h>
-
-
-#ifdef DEBUG
-/* For debugging purposes.  */
-static void print_all (void);
-#endif
-
-
-/* This is a tuning parameter.  If a transformation module is not used
-   anymore it gets not immediately unloaded.  Instead we wait a certain
-   number of load attempts for further modules.  If none of the
-   subsequent load attempts name the same object it finally gets unloaded.
-   Otherwise it is still available which hopefully is the frequent case.
-   The following number is the number of unloading attempts we wait
-   before unloading.  */
-#define TRIES_BEFORE_UNLOAD	2
-
-/* Array of loaded objects.  This is shared by all threads so we have
-   to use semaphores to access it.  */
-static void *loaded;
-
-/* Comparison function for searching `loaded_object' tree.  */
-static int
-known_compare (const void *p1, const void *p2)
-{
-  const struct __gconv_loaded_object *s1 =
-    (const struct __gconv_loaded_object *) p1;
-  const struct __gconv_loaded_object *s2 =
-    (const struct __gconv_loaded_object *) p2;
-
-  return strcmp (s1->name, s2->name);
-}
-
-/* Open the gconv database if necessary.  A non-negative return value
-   means success.  */
-struct __gconv_loaded_object *
-internal_function
-__gconv_find_shlib (const char *name)
-{
-  struct __gconv_loaded_object *found;
-  void *keyp;
-
-  
-
-  /* Search the tree of shared objects previously requested.  Data in
-     the tree are `loaded_object' structures, whose first member is a
-     `const char *', the lookup key.  The search returns a pointer to
-     the tree node structure; the first member of the is a pointer to
-     our structure (i.e. what will be a `loaded_object'); since the
-     first member of that is the lookup key string, &FCT_NAME is close
-     enough to a pointer to our structure to use as a lookup key that
-     will be passed to `known_compare' (above).  */
-
-  keyp = tfind (&name, &loaded, known_compare);
-  if (keyp == NULL)
-    {
-      /* This name was not known before.  */
-      size_t namelen = strlen (name) + 1;
-
-      found = malloc (sizeof (struct __gconv_loaded_object) + namelen);
-      if (found != NULL)
-	{
-	  /* Point the tree node at this new structure.  */
-	  found->name = (char *) memcpy (found + 1, name, namelen);
-	  found->counter = -TRIES_BEFORE_UNLOAD - 1;
-	  found->handle = NULL;
-
-	  if (__builtin_expect (tsearch (found, &loaded, known_compare)
-				== NULL, 0))
-	    {
-	      /* Something went wrong while inserting the entry.  */
-	      free (found);
-	      found = NULL;
-	    }
-	}
-    }
-  else
-    found = *(struct __gconv_loaded_object **) keyp;
-
-  /* Try to load the shared object if the usage count is 0.  This
-     implies that if the shared object is not loadable, the handle is
-     NULL and the usage count > 0.  */
-  if (found != NULL)
-    {
-      if (found->counter < -TRIES_BEFORE_UNLOAD)
-	{
-	  assert (found->handle == NULL);
-	  found->handle = __libc_dlopen (found->name);
-	  if (found->handle != NULL)
-	    {
-	      found->fct = __libc_dlsym (found->handle, "gconv");
-	      if (found->fct == NULL)
-		{
-		  /* Argh, no conversion function.  There is something
-                     wrong here.  */
-		  __gconv_release_shlib (found);
-		  found = NULL;
-		}
-	      else
-		{
-		  found->init_fct = __libc_dlsym (found->handle, "gconv_init");
-		  found->end_fct = __libc_dlsym (found->handle, "gconv_end");
-
-		  /* We have succeeded in loading the shared object.  */
-		  found->counter = 1;
-		}
-	    }
-	  else
-	    /* Error while loading the shared object.  */
-	    found = NULL;
-	}
-      else if (found->handle != NULL)
-	found->counter = MAX (found->counter + 1, 1);
-    }
-
-  return found;
-}
-
-
-/* This is very ugly but the tsearch functions provide no way to pass
-   information to the walker function.  So we use a global variable.
-   It is MT safe since we use a lock.  */
-static struct __gconv_loaded_object *release_handle;
-
-static void
-do_release_shlib (void *nodep, VISIT value, int level)
-{
-  struct __gconv_loaded_object *obj = *(struct __gconv_loaded_object **) nodep;
-
-  
-
-  if (value != preorder && value != leaf)
-    return;
-
-  if (obj == release_handle)
-    {
-      /* This is the object we want to unload.  Now decrement the
-	 reference counter.  */
-      assert (obj->counter > 0);
-      --obj->counter;
-    }
-  else if (obj->counter <= 0 && obj->counter >= -TRIES_BEFORE_UNLOAD
-	   && --obj->counter < -TRIES_BEFORE_UNLOAD && obj->handle != NULL)
-    {
-      /* Unload the shared object.  */
-      __libc_dlclose (obj->handle);
-      obj->handle = NULL;
-    }
-}
-
-
-/* Notify system that a shared object is not longer needed.  */
-void
-internal_function
-__gconv_release_shlib (struct __gconv_loaded_object *handle)
-{
-  /* Urgh, this is ugly but we have no other possibility.  */
-  release_handle = handle;
-
-  /* Process all entries.  Please note that we also visit entries
-     with release counts <= 0.  This way we can finally unload them
-     if necessary.  */
-  twalk (loaded, (void *) do_release_shlib);
-}
-
-
-/* We run this if we debug the memory allocation.  */
-static void
-do_release_all (void *nodep)
-{
-  struct __gconv_loaded_object *obj = (struct __gconv_loaded_object *) nodep;
-
-  
-  /* Unload the shared object.  */
-  if (obj->handle != NULL)
-    __libc_dlclose (obj->handle);
-
-  free (obj);
-}
-
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  tdestroy (loaded, do_release_all);
-}
-text_set_element (__libc_subfreeres, free_mem);
-
-
-#ifdef DEBUG
-static void
-do_print (const void *nodep, VISIT value, int level)
-{
-  struct __gconv_loaded_object *obj = *(struct __gconv_loaded_object **) nodep;
-
-  printf ("%10s: \"%s\", %d\n",
-	  value == leaf ? "leaf" :
-	  value == preorder ? "preorder" :
-	  value == postorder ? "postorder" : "endorder",
-	  obj->name, obj->counter);
-}
-
-static void
-print_all (void)
-{
-  __twalk (loaded, do_print);
-}
-#endif
diff --git a/newlib/libc/sys/linux/iconv/gconv_int.h b/newlib/libc/sys/linux/iconv/gconv_int.h
deleted file mode 100644
index bcd50a2c6..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_int.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _GCONV_INT_H
-#define _GCONV_INT_H	1
-
-#include "gconv.h"
-#include <libc-symbols.h>
-
-__BEGIN_DECLS
-
-
-/* Type to represent search path.  */
-struct path_elem
-{
-  const char *name;
-  size_t len;
-};
-
-/* Variable with search path for `gconv' implementation.  */
-extern struct path_elem *__gconv_path_elem;
-/* Maximum length of a single path element.  */
-extern size_t __gconv_max_path_elem_len;
-
-
-/* Structure for alias definition.  Simply two strings.  */
-struct gconv_alias
-{
-  char *fromname;
-  char *toname;
-};
-
-
-/* How many character should be conveted in one call?  */
-#define GCONV_NCHAR_GOAL	8160
-
-
-/* Structure describing one loaded shared object.  This normally are
-   objects to perform conversation but as a special case the db shared
-   object is also handled.  */
-struct __gconv_loaded_object
-{
-  /* Name of the object.  It must be the first structure element.  */
-  const char *name;
-
-  /* Reference counter for the db functionality.  If no conversion is
-     needed we unload the db library.  */
-  int counter;
-
-  /* The handle for the shared object.  */
-  void *handle;
-
-  /* Pointer to the functions the module defines.  */
-  __gconv_fct fct;
-  __gconv_init_fct init_fct;
-  __gconv_end_fct end_fct;
-};
-
-
-/* Description for an available conversion module.  */
-struct gconv_module
-{
-  const char *from_string;
-  const char *to_string;
-
-  int cost_hi;
-  int cost_lo;
-
-  const char *module_name;
-
-  struct gconv_module *left;	/* Prefix smaller.  */
-  struct gconv_module *same;	/* List of entries with identical prefix.  */
-  struct gconv_module *right;	/* Prefix larger.  */
-};
-
-
-/* Internal data structure to represent transliteration module.  */
-struct trans_struct
-{
-  const char *name;
-  struct trans_struct *next;
-
-  const char **csnames;
-  size_t ncsnames;
-  __gconv_trans_fct trans_fct;
-  __gconv_trans_context_fct trans_context_fct;
-  __gconv_trans_init_fct trans_init_fct;
-  __gconv_trans_end_fct trans_end_fct;
-};
-
-
-/* Flags for `gconv_open'.  */
-enum
-{
-  GCONV_AVOID_NOCONV = 1 << 0
-};
-
-
-/* Global variables.  */
-
-/* Database of alias names.  */
-extern void *__gconv_alias_db;
-
-/* Array with available modules.  */
-extern size_t __gconv_nmodules;
-extern struct gconv_module *__gconv_modules_db;
-
-/* Value of the GCONV_PATH environment variable.  */
-extern const char *__gconv_path_envvar;
-
-
-/* The gconv functions expects the name to be in upper case and complete,
-   including the trailing slashes if necessary.  */
-#define norm_add_slashes(str,suffix) \
-  ({									      \
-    const char *cp = (str);						      \
-    char *result;							      \
-    char *tmp;								      \
-    size_t cnt = 0;							      \
-    size_t suffix_len = (suffix) == NULL ? 0 : strlen (suffix);		      \
-									      \
-    while (*cp != '\0')							      \
-      if (*cp++ == '/')							      \
-	++cnt;								      \
-									      \
-    tmp = result = alloca (cp - (str) + 3 + suffix_len);		      \
-    cp = (str);								      \
-    while (*cp != '\0')							      \
-      *tmp++ = __toupper_l (*cp++, &_nl_C_locobj);			      \
-    if (cnt < 2)							      \
-      {									      \
-	*tmp++ = '/';							      \
-	if (cnt < 1)							      \
-	  {								      \
-	    *tmp++ = '/';						      \
-	    if (suffix != NULL)						      \
-            {                                                                 \
-	      tmp = memcpy (tmp, suffix, suffix_len);		              \
-              tmp += suffix_len;                                              \
-            }                                                                 \
-	  }								      \
-      }									      \
-    *tmp = '\0';							      \
-    result;								      \
-  })
-
-
-/* Return in *HANDLE decriptor for transformation from FROMSET to TOSET.  */
-extern int __gconv_open (const char *toset, const char *fromset,
-			 __gconv_t *handle, int flags)
-     internal_function;
-
-/* Free resources associated with transformation descriptor CD.  */
-extern int __gconv_close (__gconv_t cd)
-     internal_function;
-
-/* Transform at most *INBYTESLEFT bytes from buffer starting at *INBUF
-   according to rules described by CD and place up to *OUTBYTESLEFT
-   bytes in buffer starting at *OUTBUF.  Return number of non-identical
-   conversions in *IRREVERSIBLE if this pointer is not null.  */
-extern int __gconv (__gconv_t cd, const unsigned char **inbuf,
-		    const unsigned char *inbufend, unsigned char **outbuf,
-		    unsigned char *outbufend, size_t *irreversible)
-     internal_function;
-
-/* Return in *HANDLE a pointer to an array with *NSTEPS elements describing
-   the single steps necessary for transformation from FROMSET to TOSET.  */
-extern int __gconv_find_transform (const char *toset, const char *fromset,
-				   struct __gconv_step **handle,
-				   size_t *nsteps, int flags)
-     internal_function;
-
-/* Search for transformation in cache data.  */
-extern int __gconv_lookup_cache (const char *toset, const char *fromset,
-				 struct __gconv_step **handle, size_t *nsteps,
-				 int flags)
-     internal_function;
-
-/* Compare the two name for whether they are after alias expansion the
-   same.  This function uses the cache and fails if none is
-   loaded.  */
-extern int __gconv_compare_alias_cache (const char *name1, const char *name2,
-					int *result) internal_function;
-
-/* Free data associated with a step's structure.  */
-extern void __gconv_release_step (struct __gconv_step *step)
-     internal_function;
-
-/* Read all the configuration data and cache it.  */
-extern void __gconv_read_conf (void);
-
-/* Try to read module cache file.  */
-extern int __gconv_load_cache (void) internal_function;
-
-/* Determine the directories we are looking in.  */
-extern void __gconv_get_path (void);
-
-/* Comparison function to search alias.  */
-extern int __gconv_alias_compare (const void *p1, const void *p2);
-
-/* Clear reference to transformation step implementations which might
-   cause the code to be unloaded.  */
-extern int __gconv_close_transform (struct __gconv_step *steps,
-				    size_t nsteps)
-     internal_function;
-
-/* Free all resources allocated for the transformation record when
-   using the cache.  */
-extern void __gconv_release_cache (struct __gconv_step *steps, size_t nsteps)
-     internal_function;
-
-/* Load shared object named by NAME.  If already loaded increment reference
-   count.  */
-extern struct __gconv_loaded_object *__gconv_find_shlib (const char *name)
-     internal_function;
-
-/* Release shared object.  If no further reference is available unload
-   the object.  */
-extern void __gconv_release_shlib (struct __gconv_loaded_object *handle)
-     internal_function;
-
-/* Fill STEP with information about builtin module with NAME.  */
-extern void __gconv_get_builtin_trans (const char *name,
-				       struct __gconv_step *step)
-     internal_function;
-
-/* Try to load transliteration step module.  */
-extern int __gconv_translit_find (struct trans_struct *trans)
-     internal_function;
-
-/* Transliteration using the locale's data.  */
-extern int __gconv_transliterate (struct __gconv_step *step,
-				  struct __gconv_step_data *step_data,
-				  void *trans_data,
-				  __const unsigned char *inbufstart,
-				  __const unsigned char **inbufp,
-				  __const unsigned char *inbufend,
-				  unsigned char **outbufstart,
-				  size_t *irreversible);
-
-
-/* Builtin transformations.  */
-#ifdef _LIBC
-# define __BUILTIN_TRANS(Name) \
-  extern int Name (struct __gconv_step *step,				      \
-		   struct __gconv_step_data *data,			      \
-		   const unsigned char **inbuf,				      \
-		   const unsigned char *inbufend,			      \
-		   unsigned char **outbufstart, size_t *irreversible,	      \
-		   int do_flush, int consume_incomplete)
-
-__BUILTIN_TRANS (__gconv_transform_ascii_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_ascii);
-__BUILTIN_TRANS (__gconv_transform_utf8_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_utf8);
-__BUILTIN_TRANS (__gconv_transform_ucs2_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_ucs2);
-__BUILTIN_TRANS (__gconv_transform_ucs2reverse_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_ucs2reverse);
-__BUILTIN_TRANS (__gconv_transform_internal_ucs4);
-__BUILTIN_TRANS (__gconv_transform_ucs4_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_ucs4le);
-__BUILTIN_TRANS (__gconv_transform_ucs4le_internal);
-__BUILTIN_TRANS (__gconv_transform_internal_utf16);
-__BUILTIN_TRANS (__gconv_transform_utf16_internal);
-# undef __BUITLIN_TRANS
-
-#endif
-
-__END_DECLS
-
-#endif /* gconv_int.h */
diff --git a/newlib/libc/sys/linux/iconv/gconv_open.c b/newlib/libc/sys/linux/iconv/gconv_open.c
deleted file mode 100644
index 5c10d601e..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_open.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/* Find matching transformation algorithms and initialize steps.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <gconv_int.h>
-
-int
-internal_function
-__gconv_open (const char *toset, const char *fromset, __gconv_t *handle,
-	      int flags)
-{
-  struct __gconv_step *steps;
-  size_t nsteps;
-  __gconv_t result = NULL;
-  size_t cnt = 0;
-  int res;
-  int conv_flags = 0;
-  const char *errhand;
-  const char *ignore;
-  struct trans_struct *trans = NULL;
-  char old_locale[20], *old_locale_p;
-  char *old, *new;
-  size_t len;
-
-  /* Find out whether any error handling method is specified.  */
-  errhand = strchr (toset, '/');
-  if (errhand != NULL)
-    errhand = strchr (errhand + 1, '/');
-  if (__builtin_expect (errhand != NULL, 1))
-    {
-      if (*++errhand == '\0')
-	errhand = NULL;
-      else
-	{
-	  /* Make copy without the error handling description.  */
-	  char *newtoset = (char *) alloca (errhand - toset + 1);
-	  char *tok;
-	  char *ptr;
-
-	  newtoset[errhand - toset] = '\0';
-	  toset = memcpy (newtoset, toset, errhand - toset);
-
-	  /* Find the appropriate transliteration handlers.  */
-          old = (char *)(errhand);
-          len = strlen (old) + 1;
-          new = (char *) alloca (len);
-          tok = (char *) memcpy (new, old, len);
-
-	  tok = strtok_r (tok, ",", &ptr);
-
-          /* Set locale to default C locale. */
-          old_locale_p = setlocale(LC_ALL, "C");
-          strncpy(old_locale, old_locale_p, 20);
-
-	  while (tok != NULL)
-	    {
-	      if (strcasecmp (tok, "TRANSLIT") == 0)
-		{
-		  /* It's the builtin transliteration handling.  We only
-		     support it for working on the internal encoding.  */
-		  static const char *internal_trans_names[1] = { "INTERNAL" };
-		  struct trans_struct *lastp = NULL;
-		  struct trans_struct *runp;
-
-		  for (runp = trans; runp != NULL; runp = runp->next)
-		    if (runp->trans_fct == __gconv_transliterate)
-		      break;
-		    else
-		      lastp = runp;
-
-		  if (runp == NULL)
-		    {
-		      struct trans_struct *newp;
-
-		      newp = (struct trans_struct *) alloca (sizeof (*newp));
-		      memset (newp, '\0', sizeof (*newp));
-
-		      /* We leave the `name' field zero to signal that
-			 this is an internal transliteration step.  */
-		      newp->csnames = internal_trans_names;
-		      newp->ncsnames = 1;
-		      newp->trans_fct = __gconv_transliterate;
-
-		      if (lastp == NULL)
-			trans = newp;
-		      else
-			lastp->next = newp;
-		    }
-		}
-	      else if (strcasecmp (tok, "IGNORE") == 0)
-		/* Set the flag to ignore all errors.  */
-		conv_flags |= __GCONV_IGNORE_ERRORS;
-	      else
-		{
-		  /* `tok' is possibly a module name.  We'll see later
-		     whether we can find it.  But first see that we do
-		     not already a module of this name.  */
-		  struct trans_struct *lastp = NULL;
-		  struct trans_struct *runp;
-
-		  for (runp = trans; runp != NULL; runp = runp->next)
-		    if (runp->name != NULL
-			&& strcasecmp (tok, runp->name) == 0)
-		      break;
-		    else
-		      lastp = runp;
-
-		  if (runp == NULL)
-		    {
-		      struct trans_struct *newp;
-
-		      newp = (struct trans_struct *) alloca (sizeof (*newp));
-		      memset (newp, '\0', sizeof (*newp));
-		      newp->name = tok;
-
-		      if (lastp == NULL)
-			trans = newp;
-		      else
-			lastp->next = newp;
-		    }
-		}
-
-	      tok = strtok_r (NULL, ",", &ptr);
-	    }
-	}
-    }
-
-  /* For the source character set we ignore the error handler specification.
-     XXX Is this really always the best?  */
-  ignore = strchr (fromset, '/');
-  if (ignore != NULL && (ignore = strchr (ignore + 1, '/')) != NULL
-      && *++ignore != '\0')
-    {
-      char *newfromset = (char *) alloca (ignore - fromset + 1);
-
-      newfromset[ignore - fromset] = '\0';
-      fromset = memcpy (newfromset, fromset, ignore - fromset);
-    }
-
-  res = __gconv_find_transform (toset, fromset, &steps, &nsteps, flags);
-  if (res == __GCONV_OK)
-    {
-      /* Find the modules.  */
-      struct trans_struct *lastp = NULL;
-      struct trans_struct *runp;
-
-      for (runp = trans; runp != NULL; runp = runp->next)
-	{
-	  if (runp->name == NULL
-	      || __builtin_expect (__gconv_translit_find (runp), 0) == 0)
-	    lastp = runp;
-	  else
-	    /* This means we haven't found the module.  Remove it.  */
-	    (lastp == NULL ? trans : lastp->next) = runp->next;
-	}
-
-      /* Allocate room for handle.  */
-      result = (__gconv_t) malloc (sizeof (struct __gconv_info)
-				   + (nsteps
-				      * sizeof (struct __gconv_step_data)));
-      if (result == NULL)
-	res = __GCONV_NOMEM;
-      else
-	{
-	  size_t n;
-
-	  /* Remember the list of steps.  */
-	  result->__steps = steps;
-	  result->__nsteps = nsteps;
-
-	  /* Clear the array for the step data.  */
-	  memset (result->__data, '\0',
-		  nsteps * sizeof (struct __gconv_step_data));
-
-	  /* Call all initialization functions for the transformation
-	     step implementations.  */
-	  for (cnt = 0; cnt < nsteps; ++cnt)
-	    {
-	      size_t size;
-
-	      /* Would have to be done if we would not clear the whole
-                 array above.  */
-#if 0
-	      /* Reset the counter.  */
-	      result->__data[cnt].__invocation_counter = 0;
-
-	      /* It's a regular use.  */
-	      result->__data[cnt].__internal_use = 0;
-#endif
-
-	      /* We use the `mbstate_t' member in DATA.  */
-	      result->__data[cnt].__statep = &result->__data[cnt].__state;
-
-	      /* Now see whether we can use any of the transliteration
-		 modules for this step.  */
-	      for (runp = trans; runp != NULL; runp = runp->next)
-		for (n = 0; n < runp->ncsnames; ++n)
-		  if (strcasecmp (steps[cnt].__from_name, runp->csnames[n]) == 0)
-		    {
-		      void *data = NULL;
-
-		      /* Match!  Now try the initializer.  */
-		      if (runp->trans_init_fct == NULL
-			  || (runp->trans_init_fct (&data,
-						    steps[cnt].__to_name)
-			      == __GCONV_OK))
-			{
-			  /* Append at the end of the list.  */
-			  struct __gconv_trans_data *newp;
-			  struct __gconv_trans_data **lastp;
-
-			  newp = (struct __gconv_trans_data *)
-			    malloc (sizeof (struct __gconv_trans_data));
-			  if (newp == NULL)
-			    {
-			      res = __GCONV_NOMEM;
-			      goto bail;
-			    }
-
-			  newp->__trans_fct = runp->trans_fct;
-			  newp->__trans_context_fct = runp->trans_context_fct;
-			  newp->__trans_end_fct = runp->trans_end_fct;
-			  newp->__data = data;
-			  newp->__next = NULL;
-
-			  lastp = &result->__data[cnt].__trans;
-			  while (*lastp != NULL)
-			    lastp = &(*lastp)->__next;
-
-			  *lastp = newp;
-			}
-		      break;
-		    }
-
-	      /* If this is the last step we must not allocate an
-		 output buffer.  */
-	      if (cnt < nsteps - 1)
-		{
-		  result->__data[cnt].__flags = conv_flags;
-
-		  /* Allocate the buffer.  */
-		  size = (GCONV_NCHAR_GOAL * steps[cnt].__max_needed_to);
-
-		  result->__data[cnt].__outbuf = (char *) malloc (size);
-		  if (result->__data[cnt].__outbuf == NULL)
-		    {
-		      res = __GCONV_NOMEM;
-		      goto bail;
-		    }
-
-		  result->__data[cnt].__outbufend =
-		    result->__data[cnt].__outbuf + size;
-		}
-	      else
-		{
-		  /* Handle the last entry.  */
-		  result->__data[cnt].__flags = conv_flags | __GCONV_IS_LAST;
-
-		  break;
-		}
-	    }
-	}
-
-      if (res != __GCONV_OK)
-	{
-	  /* Something went wrong.  Free all the resources.  */
-	  int serrno;
-	bail:
-	  serrno = errno;
-
-	  if (result != NULL)
-	    {
-	      while (cnt-- > 0)
-		{
-		  struct __gconv_trans_data *transp;
-
-		  transp = result->__data[cnt].__trans;
-		  while (transp != NULL)
-		    {
-		      struct __gconv_trans_data *curp = transp;
-		      transp = transp->__next;
-
-		      if (__builtin_expect (curp->__trans_end_fct != NULL, 0))
-			curp->__trans_end_fct (curp->__data);
-
-		      free (curp);
-		    }
-
-		  free (result->__data[cnt].__outbuf);
-		}
-
-	      free (result);
-	      result = NULL;
-	    }
-
-	  __gconv_close_transform (steps, nsteps);
-
-	  __set_errno (serrno);
-	}
-    }
-
-  *handle = result;
-  setlocale(LC_ALL, old_locale);
-  return res;
-}
diff --git a/newlib/libc/sys/linux/iconv/gconv_simple.c b/newlib/libc/sys/linux/iconv/gconv_simple.c
deleted file mode 100644
index a4a99ea81..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_simple.c
+++ /dev/null
@@ -1,1327 +0,0 @@
-/* Simple transformations functions.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <byteswap.h>
-#include <dlfcn.h>
-#include <endian.h>
-#include <errno.h>
-#include <gconv.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <wchar.h>
-#include <sys/param.h>
-
-#define BUILTIN_ALIAS(s1, s2) /* nothing */
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT) \
-  extern int Fct (struct __gconv_step *, struct __gconv_step_data *,	      \
-		  __const unsigned char **, __const unsigned char *,	      \
-		  unsigned char **, size_t *, int, int);
-#include "gconv_builtin.h"
-
-
-#ifndef EILSEQ
-# define EILSEQ EINVAL
-#endif
-
-
-/* Transform from the internal, UCS4-like format, to UCS4.  The
-   difference between the internal ucs4 format and the real UCS4
-   format is, if any, the endianess.  The Unicode/ISO 10646 says that
-   unless some higher protocol specifies it differently, the byte
-   order is big endian.*/
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_ucs4_loop
-#define TO_LOOP			internal_ucs4_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_internal_ucs4
-
-
-static inline int
-internal_ucs4_loop (struct __gconv_step *step,
-		    struct __gconv_step_data *step_data,
-		    const unsigned char **inptrp, const unsigned char *inend,
-		    unsigned char **outptrp, unsigned char *outend,
-		    size_t *irreversible)
-{
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-  /* Sigh, we have to do some real work.  */
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    *((uint32_t *) outptr)++ = bswap_32 (*(const uint32_t *) inptr);
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-#elif __BYTE_ORDER == __BIG_ENDIAN
-  /* Simply copy the data.  */
-  *inptrp = inptr + n_convert * 4;
-  *outptrp = memcpy (outptr, inptr, n_convert * 4);
-  *outptrp += n_convert * 4;
-#else
-# error "This endianess is not supported."
-#endif
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-
-#ifndef _STRING_ARCH_unaligned
-static inline int
-internal_ucs4_loop_unaligned (struct __gconv_step *step,
-			      struct __gconv_step_data *step_data,
-			      const unsigned char **inptrp,
-			      const unsigned char *inend,
-			      unsigned char **outptrp, unsigned char *outend,
-			      size_t *irreversible)
-{
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-  /* Sigh, we have to do some real work.  */
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4, outptr += 4)
-    {
-      outptr[0] = inptr[3];
-      outptr[1] = inptr[2];
-      outptr[2] = inptr[1];
-      outptr[3] = inptr[0];
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-# elif __BYTE_ORDER == __BIG_ENDIAN
-  /* Simply copy the data.  */
-  *inptrp = inptr + n_convert * 4;
-  *outptrp = memcpy (outptr, inptr, n_convert * 4);
-  *outptrp += n_convert * 4;
-# else
-#  error "This endianess is not supported."
-# endif
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-#endif
-
-
-static inline int
-internal_ucs4_loop_single (struct __gconv_step *step,
-			   struct __gconv_step_data *step_data,
-			   const unsigned char **inptrp,
-			   const unsigned char *inend,
-			   unsigned char **outptrp, unsigned char *outend,
-			   size_t *irreversible)
-{
-  mbstate_t *state = step_data->__statep;
-  size_t cnt = state->__count & 7;
-
-  while (*inptrp < inend && cnt < 4)
-    state->__value.__wchb[cnt++] = *(*inptrp)++;
-
-  if (__builtin_expect (cnt < 4, 0))
-    {
-      /* Still not enough bytes.  Store the ones in the input buffer.  */
-      state->__count &= ~7;
-      state->__count |= cnt;
-
-      return __GCONV_INCOMPLETE_INPUT;
-    }
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-  (*outptrp)[0] = state->__value.__wchb[3];
-  (*outptrp)[1] = state->__value.__wchb[2];
-  (*outptrp)[2] = state->__value.__wchb[1];
-  (*outptrp)[3] = state->__value.__wchb[0];
-
-  *outptrp += 4;
-#elif __BYTE_ORDER == __BIG_ENDIAN
-  /* XXX unaligned */
-  *(*((uint32_t **) outptrp)++) = state->__value.__wch;
-#else
-# error "This endianess is not supported."
-#endif
-
-  /* Clear the state buffer.  */
-  state->__count &= ~7;
-
-  return __GCONV_OK;
-}
-
-#include <iconv/skeleton.c>
-
-
-/* Transform from UCS4 to the internal, UCS4-like format.  Unlike
-   for the other direction we have to check for correct values here.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		ucs4_internal_loop
-#define TO_LOOP			ucs4_internal_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_ucs4_internal
-
-
-static inline int
-ucs4_internal_loop (struct __gconv_step *step,
-		    struct __gconv_step_data *step_data,
-		    const unsigned char **inptrp, const unsigned char *inend,
-		    unsigned char **outptrp, unsigned char *outend,
-		    size_t *irreversible)
-{
-  int flags = step_data->__flags;
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    {
-      uint32_t inval;
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-      inval = bswap_32 (*(const uint32_t *) inptr);
-#else
-      inval = *(const uint32_t *) inptr;
-#endif
-
-      if (__builtin_expect (inval > 0x7fffffff, 0))
-	{
-	  /* The value is too large.  We don't try transliteration here since
-	     this is not an error because of the lack of possibilities to
-	     represent the result.  This is a genuine bug in the input since
-	     UCS4 does not allow such values.  */
-	  if (irreversible == NULL)
-	    /* We are transliterating, don't try to correct anything.  */
-	    return __GCONV_ILLEGAL_INPUT;
-
-	  if (flags & __GCONV_IGNORE_ERRORS)
-	    {
-	      /* Just ignore this character.  */
-	      ++*irreversible;
-	      continue;
-	    }
-
-	  *inptrp = inptr;
-	  *outptrp = outptr;
-	  return __GCONV_ILLEGAL_INPUT;
-	}
-
-      *((uint32_t *) outptr)++ = inval;
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-
-#ifndef _STRING_ARCH_unaligned
-static inline int
-ucs4_internal_loop_unaligned (struct __gconv_step *step,
-			      struct __gconv_step_data *step_data,
-			      const unsigned char **inptrp,
-			      const unsigned char *inend,
-			      unsigned char **outptrp, unsigned char *outend,
-			      size_t *irreversible)
-{
-  int flags = step_data->__flags;
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    {
-      if (__builtin_expect (inptr[0] > 0x80, 0))
-	{
-	  /* The value is too large.  We don't try transliteration here since
-	     this is not an error because of the lack of possibilities to
-	     represent the result.  This is a genuine bug in the input since
-	     UCS4 does not allow such values.  */
-	  if (irreversible == NULL)
-	    /* We are transliterating, don't try to correct anything.  */
-	    return __GCONV_ILLEGAL_INPUT;
-
-	  if (flags & __GCONV_IGNORE_ERRORS)
-	    {
-	      /* Just ignore this character.  */
-	      ++*irreversible;
-	      continue;
-	    }
-
-	  *inptrp = inptr;
-	  *outptrp = outptr;
- 	  return __GCONV_ILLEGAL_INPUT;
-	}
-
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-      outptr[3] = inptr[0];
-      outptr[2] = inptr[1];
-      outptr[1] = inptr[2];
-      outptr[0] = inptr[3];
-# else
-      outptr[0] = inptr[0];
-      outptr[1] = inptr[1];
-      outptr[2] = inptr[2];
-      outptr[3] = inptr[3];
-# endif
-      outptr += 4;
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-#endif
-
-
-static inline int
-ucs4_internal_loop_single (struct __gconv_step *step,
-			   struct __gconv_step_data *step_data,
-			   const unsigned char **inptrp,
-			   const unsigned char *inend,
-			   unsigned char **outptrp, unsigned char *outend,
-			   size_t *irreversible)
-{
-  mbstate_t *state = step_data->__statep;
-  int flags = step_data->__flags;
-  size_t cnt = state->__count & 7;
-
-  while (*inptrp < inend && cnt < 4)
-    state->__value.__wchb[cnt++] = *(*inptrp)++;
-
-  if (__builtin_expect (cnt < 4, 0))
-    {
-      /* Still not enough bytes.  Store the ones in the input buffer.  */
-      state->__count &= ~7;
-      state->__count |= cnt;
-
-      return __GCONV_INCOMPLETE_INPUT;
-    }
-
-  if (__builtin_expect (((unsigned char *) state->__value.__wchb)[0] > 0x80,
-			0))
-    {
-      /* The value is too large.  We don't try transliteration here since
-	 this is not an error because of the lack of possibilities to
-	 represent the result.  This is a genuine bug in the input since
-	 UCS4 does not allow such values.  */
-      if (!(flags & __GCONV_IGNORE_ERRORS))
-	{
-	  *inptrp -= cnt - (state->__count & 7);
-	  return __GCONV_ILLEGAL_INPUT;
-	}
-    }
-  else
-    {
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-      (*outptrp)[0] = state->__value.__wchb[3];
-      (*outptrp)[1] = state->__value.__wchb[2];
-      (*outptrp)[2] = state->__value.__wchb[1];
-      (*outptrp)[3] = state->__value.__wchb[0];
-#elif __BYTE_ORDER == __BIG_ENDIAN
-      (*outptrp)[0] = state->__value.__wchb[0];
-      (*outptrp)[1] = state->__value.__wchb[1];
-      (*outptrp)[2] = state->__value.__wchb[2];
-      (*outptrp)[3] = state->__value.__wchb[3];
-#endif
-
-      *outptrp += 4;
-    }
-
-  /* Clear the state buffer.  */
-  state->__count &= ~7;
-
-  return __GCONV_OK;
-}
-
-#include <iconv/skeleton.c>
-
-
-/* Similarly for the little endian form.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_ucs4le_loop
-#define TO_LOOP			internal_ucs4le_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_internal_ucs4le
-
-
-static inline int
-internal_ucs4le_loop (struct __gconv_step *step,
-		      struct __gconv_step_data *step_data,
-		      const unsigned char **inptrp, const unsigned char *inend,
-		      unsigned char **outptrp, unsigned char *outend,
-		      size_t *irreversible)
-{
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-  /* Sigh, we have to do some real work.  */
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    *((uint32_t *) outptr)++ = bswap_32 (*(const uint32_t *) inptr);
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-#elif __BYTE_ORDER == __LITTLE_ENDIAN
-  /* Simply copy the data.  */
-  *inptrp = inptr + n_convert * 4;
-  *outptrp = memcpy (outptr, inptr, n_convert * 4);
-  *outptrp += n_convert * 4;
-#else
-# error "This endianess is not supported."
-#endif
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-
-#ifndef _STRING_ARCH_unaligned
-static inline int
-internal_ucs4le_loop_unaligned (struct __gconv_step *step,
-				struct __gconv_step_data *step_data,
-				const unsigned char **inptrp,
-				const unsigned char *inend,
-				unsigned char **outptrp, unsigned char *outend,
-				size_t *irreversible)
-{
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-
-# if __BYTE_ORDER == __BIG_ENDIAN
-  /* Sigh, we have to do some real work.  */
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4, outptr += 4)
-    {
-      outptr[0] = inptr[3];
-      outptr[1] = inptr[2];
-      outptr[2] = inptr[1];
-      outptr[3] = inptr[0];
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-  /* Simply copy the data.  */
-  *inptrp = inptr + n_convert * 4;
-  *outptrp = memcpy (outptr, inptr, n_convert * 4);
-  *outptrp += n_convert * 4;
-# else
-#  error "This endianess is not supported."
-# endif
-
-  /* Determine the status.  */
-  if (*inptrp + 4 > inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-#endif
-
-
-static inline int
-internal_ucs4le_loop_single (struct __gconv_step *step,
-			     struct __gconv_step_data *step_data,
-			     const unsigned char **inptrp,
-			     const unsigned char *inend,
-			     unsigned char **outptrp, unsigned char *outend,
-			     size_t *irreversible)
-{
-  mbstate_t *state = step_data->__statep;
-  size_t cnt = state->__count & 7;
-
-  while (*inptrp < inend && cnt < 4)
-    state->__value.__wchb[cnt++] = *(*inptrp)++;
-
-  if (__builtin_expect (cnt < 4, 0))
-    {
-      /* Still not enough bytes.  Store the ones in the input buffer.  */
-      state->__count &= ~7;
-      state->__count |= cnt;
-
-      return __GCONV_INCOMPLETE_INPUT;
-    }
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-  (*outptrp)[0] = state->__value.__wchb[3];
-  (*outptrp)[1] = state->__value.__wchb[2];
-  (*outptrp)[2] = state->__value.__wchb[1];
-  (*outptrp)[3] = state->__value.__wchb[0];
-
-  *outptrp += 4;
-#else
-  /* XXX unaligned */
-  *(*((uint32_t **) outptrp)++) = state->__value.__wch;
-#endif
-
-  /* Clear the state buffer.  */
-  state->__count &= ~7;
-
-  return __GCONV_OK;
-}
-
-#include <iconv/skeleton.c>
-
-
-/* And finally from UCS4-LE to the internal encoding.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		ucs4le_internal_loop
-#define TO_LOOP			ucs4le_internal_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_ucs4le_internal
-
-
-static inline int
-ucs4le_internal_loop (struct __gconv_step *step,
-		      struct __gconv_step_data *step_data,
-		      const unsigned char **inptrp, const unsigned char *inend,
-		      unsigned char **outptrp, unsigned char *outend,
-		      size_t *irreversible)
-{
-  int flags = step_data->__flags;
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    {
-      uint32_t inval;
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-      inval = bswap_32 (*(const uint32_t *) inptr);
-#else
-      inval = *(const uint32_t *) inptr;
-#endif
-
-      if (__builtin_expect (inval > 0x7fffffff, 0))
-	{
-	  /* The value is too large.  We don't try transliteration here since
-	     this is not an error because of the lack of possibilities to
-	     represent the result.  This is a genuine bug in the input since
-	     UCS4 does not allow such values.  */
-	  if (irreversible == NULL)
-	    /* We are transliterating, don't try to correct anything.  */
-	    return __GCONV_ILLEGAL_INPUT;
-
-	  if (flags & __GCONV_IGNORE_ERRORS)
-	    {
-	      /* Just ignore this character.  */
-	      ++*irreversible;
-	      continue;
-	    }
-
-	  return __GCONV_ILLEGAL_INPUT;
-	}
-
-      *((uint32_t *) outptr)++ = inval;
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-
-#ifndef _STRING_ARCH_unaligned
-static inline int
-ucs4le_internal_loop_unaligned (struct __gconv_step *step,
-				struct __gconv_step_data *step_data,
-				const unsigned char **inptrp,
-				const unsigned char *inend,
-				unsigned char **outptrp, unsigned char *outend,
-				size_t *irreversible)
-{
-  int flags = step_data->__flags;
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t n_convert = MIN (inend - inptr, outend - outptr) / 4;
-  int result;
-  size_t cnt;
-
-  for (cnt = 0; cnt < n_convert; ++cnt, inptr += 4)
-    {
-      if (__builtin_expect (inptr[3] > 0x80, 0))
-	{
-	  /* The value is too large.  We don't try transliteration here since
-	     this is not an error because of the lack of possibilities to
-	     represent the result.  This is a genuine bug in the input since
-	     UCS4 does not allow such values.  */
-	  if (irreversible == NULL)
-	    /* We are transliterating, don't try to correct anything.  */
-	    return __GCONV_ILLEGAL_INPUT;
-
-	  if (flags & __GCONV_IGNORE_ERRORS)
-	    {
-	      /* Just ignore this character.  */
-	      ++*irreversible;
-	      continue;
-	    }
-
-	  *inptrp = inptr;
-	  *outptrp = outptr;
- 	  return __GCONV_ILLEGAL_INPUT;
-	}
-
-# if __BYTE_ORDER == __BIG_ENDIAN
-      outptr[3] = inptr[0];
-      outptr[2] = inptr[1];
-      outptr[1] = inptr[2];
-      outptr[0] = inptr[3];
-# else
-      outptr[0] = inptr[0];
-      outptr[1] = inptr[1];
-      outptr[2] = inptr[2];
-      outptr[3] = inptr[3];
-# endif
-
-      outptr += 4;
-    }
-
-  *inptrp = inptr;
-  *outptrp = outptr;
-
-  /* Determine the status.  */
-  if (*inptrp == inend)
-    result = __GCONV_EMPTY_INPUT;
-  else if (*outptrp + 4 > outend)
-    result = __GCONV_FULL_OUTPUT;
-  else
-    result = __GCONV_INCOMPLETE_INPUT;
-
-  return result;
-}
-#endif
-
-
-static inline int
-ucs4le_internal_loop_single (struct __gconv_step *step,
-			     struct __gconv_step_data *step_data,
-			     const unsigned char **inptrp,
-			     const unsigned char *inend,
-			     unsigned char **outptrp, unsigned char *outend,
-			     size_t *irreversible)
-{
-  mbstate_t *state = step_data->__statep;
-  int flags = step_data->__flags;
-  size_t cnt = state->__count & 7;
-
-  while (*inptrp < inend && cnt < 4)
-    state->__value.__wchb[cnt++] = *(*inptrp)++;
-
-  if (__builtin_expect (cnt < 4, 0))
-    {
-      /* Still not enough bytes.  Store the ones in the input buffer.  */
-      state->__count &= ~7;
-      state->__count |= cnt;
-
-      return __GCONV_INCOMPLETE_INPUT;
-    }
-
-  if (__builtin_expect (((unsigned char *) state->__value.__wchb)[3] > 0x80,
-			0))
-    {
-      /* The value is too large.  We don't try transliteration here since
-	 this is not an error because of the lack of possibilities to
-	 represent the result.  This is a genuine bug in the input since
-	 UCS4 does not allow such values.  */
-      if (!(flags & __GCONV_IGNORE_ERRORS))
-	return __GCONV_ILLEGAL_INPUT;
-    }
-  else
-    {
-#if __BYTE_ORDER == __BIG_ENDIAN
-      (*outptrp)[0] = state->__value.__wchb[3];
-      (*outptrp)[1] = state->__value.__wchb[2];
-      (*outptrp)[2] = state->__value.__wchb[1];
-      (*outptrp)[3] = state->__value.__wchb[0];
-#elif __BYTE_ORDER == __BIG_ENDIAN
-      (*outptrp)[0] = state->__value.__wchb[0];
-      (*outptrp)[1] = state->__value.__wchb[1];
-      (*outptrp)[2] = state->__value.__wchb[2];
-      (*outptrp)[3] = state->__value.__wchb[3];
-#endif
-
-      *outptrp += 4;
-    }
-
-  /* Clear the state buffer.  */
-  state->__count &= ~7;
-
-  return __GCONV_OK;
-}
-
-#include <iconv/skeleton.c>
-
-
-/* Convert from ISO 646-IRV to the internal (UCS4-like) format.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		1
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		ascii_internal_loop
-#define TO_LOOP			ascii_internal_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_ascii_internal
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    if (__builtin_expect (*inptr > '\x7f', 0))				      \
-      {									      \
-	/* The value is too large.  We don't try transliteration here since   \
-	   this is not an error because of the lack of possibilities to	      \
-	   represent the result.  This is a genuine bug in the input since    \
-	   ASCII does not allow such values.  */			      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    /* This is no correct ANSI_X3.4-1968 character.  */		      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	++*irreversible;						      \
-	++inptr;							      \
-      }									      \
-    else								      \
-      /* It's an one byte sequence.  */					      \
-      *((uint32_t *) outptr)++ = *inptr++;				      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from the internal (UCS4-like) format to ISO 646-IRV.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		1
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_ascii_loop
-#define TO_LOOP			internal_ascii_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_internal_ascii
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    if (__builtin_expect (*((const uint32_t *) inptr) > 0x7f, 0))	      \
-      {									      \
-	UNICODE_TAG_HANDLER (*((const uint32_t *) inptr), 4);		      \
-	STANDARD_ERR_HANDLER (4);					      \
-      }									      \
-    else								      \
-      /* It's an one byte sequence.  */					      \
-      *outptr++ = *((const uint32_t *) inptr)++;			      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from the internal (UCS4-like) format to UTF-8.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		1
-#define MAX_NEEDED_TO		6
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_utf8_loop
-#define TO_LOOP			internal_utf8_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_internal_utf8
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define MAX_NEEDED_OUTPUT	MAX_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t wc = *((const uint32_t *) inptr);				      \
-									      \
-    if (wc < 0x80)							      \
-      /* It's an one byte sequence.  */					      \
-      *outptr++ = (unsigned char) wc;					      \
-    else if (__builtin_expect (wc <= 0x7fffffff, 1))			      \
-      {									      \
-	size_t step;							      \
-	char *start;							      \
-									      \
-	for (step = 2; step < 6; ++step)				      \
-	  if ((wc & (~(uint32_t)0 << (5 * step + 1))) == 0)		      \
-	    break;							      \
-									      \
-	if (__builtin_expect (outptr + step > outend, 0))		      \
-	  {								      \
-	    /* Too long.  */						      \
-	    result = __GCONV_FULL_OUTPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	start = outptr;							      \
-	*outptr = (unsigned char) (~0xff >> step);			      \
-	outptr += step;							      \
-	--step;								      \
-	do								      \
-	  {								      \
-	    start[step] = 0x80 | (wc & 0x3f);				      \
-	    wc >>= 6;							      \
-	  }								      \
-	while (--step > 0);						      \
-	start[0] |= wc;							      \
-      }									      \
-    else								      \
-      {									      \
-	STANDARD_ERR_HANDLER (4);					      \
-      }									      \
-									      \
-    inptr += 4;								      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from UTF-8 to the internal (UCS4-like) format.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		1
-#define MAX_NEEDED_FROM		6
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		utf8_internal_loop
-#define TO_LOOP			utf8_internal_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_utf8_internal
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MAX_NEEDED_INPUT	MAX_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t ch;							      \
-    uint32_t cnt;							      \
-    uint32_t i;							      \
-									      \
-    /* Next input byte.  */						      \
-    ch = *inptr;							      \
-									      \
-    if (ch < 0x80)							      \
-      {									      \
-	/* One byte sequence.  */					      \
-	cnt = 1;							      \
-	++inptr;							      \
-      }									      \
-    else								      \
-      {									      \
- 	if (ch >= 0xc2 && ch < 0xe0)					      \
-	  {								      \
- 	    /* We expect two bytes.  The first byte cannot be 0xc0 or 0xc1,   \
- 	       otherwise the wide character could have been represented	      \
- 	       using a single byte.  */					      \
-	    cnt = 2;							      \
-	    ch &= 0x1f;							      \
-	  }								      \
-        else if (__builtin_expect ((ch & 0xf0) == 0xe0, 1))		      \
-	  {								      \
-	    /* We expect three bytes.  */				      \
-	    cnt = 3;							      \
-	    ch &= 0x0f;							      \
-	  }								      \
-	else if (__builtin_expect ((ch & 0xf8) == 0xf0, 1))		      \
-	  {								      \
-	    /* We expect four bytes.  */				      \
-	    cnt = 4;							      \
-	    ch &= 0x07;							      \
-	  }								      \
-	else if (__builtin_expect ((ch & 0xfc) == 0xf8, 1))		      \
-	  {								      \
-	    /* We expect five bytes.  */				      \
-	    cnt = 5;							      \
-	    ch &= 0x03;							      \
-	  }								      \
-	else if (__builtin_expect ((ch & 0xfe) == 0xfc, 1))		      \
-	  {								      \
-	    /* We expect six bytes.  */					      \
-	    cnt = 6;							      \
-	    ch &= 0x01;							      \
-	  }								      \
-	else								      \
-	  {								      \
-	    int skipped;						      \
-									      \
-	    if (! ignore_errors_p ())					      \
-	      {								      \
-		/* This is an illegal encoding.  */			      \
-		result = __GCONV_ILLEGAL_INPUT;				      \
-		break;							      \
-	      }								      \
-									      \
-	    /* Search the end of this ill-formed UTF-8 character.  This	      \
-	       is the next byte with (x & 0xc0) != 0x80.  */		      \
-	     skipped = 0;						      \
-	     do								      \
-	       {							      \
-		 ++inptr;						      \
-		 ++skipped;						      \
-	       }							      \
-	     while (inptr < inend && (*inptr & 0xc0) == 0x80 && skipped < 5); \
-									      \
-	     continue;							      \
-	  }								      \
-									      \
-	if (__builtin_expect (inptr + cnt > inend, 0))			      \
-	  {								      \
-	    /* We don't have enough input.  But before we report that check   \
-	       that all the bytes are correct.  */			      \
-	    for (i = 1; inptr + i < inend; ++i)				      \
-	      if ((inptr[i] & 0xc0) != 0x80)				      \
-		break;							      \
-									      \
-	    if (__builtin_expect (inptr + i == inend, 1))		      \
-	      {								      \
-		result = __GCONV_INCOMPLETE_INPUT;			      \
-		break;							      \
-	      }								      \
-									      \
-	    if (ignore_errors_p ())					      \
-	      {								      \
-		/* Ignore it.  */					      \
-		inptr += i;						      \
-		++*irreversible;					      \
-		continue;						      \
-	      }								      \
-									      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	/* Read the possible remaining bytes.  */			      \
-	for (i = 1; i < cnt; ++i)					      \
-	  {								      \
-	    uint32_t byte = inptr[i];					      \
-									      \
-	    if ((byte & 0xc0) != 0x80)					      \
-	      /* This is an illegal encoding.  */			      \
-	      break;							      \
-									      \
-	    ch <<= 6;							      \
-	    ch |= byte & 0x3f;						      \
-	  }								      \
-									      \
-	/* If i < cnt, some trail byte was not >= 0x80, < 0xc0.		      \
-	   If cnt > 2 and ch < 2^(5*cnt-4), the wide character ch could	      \
-	   have been represented with fewer than cnt bytes.  */		      \
-	if (i < cnt || (cnt > 2 && (ch >> (5 * cnt - 4)) == 0))		      \
-	  {								      \
-	    /* This is an illegal encoding.  */				      \
-	    if (ignore_errors_p ())					      \
-	      {								      \
-		inptr += i;						      \
-		++*irreversible;					      \
-		continue;						      \
-	      }								      \
-									      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-									      \
-	inptr += cnt;							      \
-      }									      \
-									      \
-    /* Now adjust the pointers and store the result.  */		      \
-    *((uint32_t *) outptr)++ = ch;					      \
-  }
-#define LOOP_NEED_FLAGS
-
-#define STORE_REST \
-  {									      \
-    /* We store the remaining bytes while converting them into the UCS4	      \
-       format.  We can assume that the first byte in the buffer is	      \
-       correct and that it requires a larger number of bytes than there	      \
-       are in the input buffer.  */					      \
-    wint_t ch = **inptrp;						      \
-    size_t cnt;								      \
-									      \
-    state->__count = inend - *inptrp;					      \
-									      \
-    if (ch >= 0xc2 && ch < 0xe0)					      \
-      {									      \
-	/* We expect two bytes.  The first byte cannot be 0xc0 or	      \
-	   0xc1, otherwise the wide character could have been		      \
-	   represented using a single byte.  */				      \
-	cnt = 2;							      \
-	ch &= 0x1f;							      \
-      }									      \
-    else if (__builtin_expect ((ch & 0xf0) == 0xe0, 1))			      \
-      {									      \
-	/* We expect three bytes.  */					      \
-	cnt = 3;							      \
-	ch &= 0x0f;							      \
-      }									      \
-    else if (__builtin_expect ((ch & 0xf8) == 0xf0, 1))			      \
-      {									      \
-	/* We expect four bytes.  */					      \
-	cnt = 4;							      \
-	ch &= 0x07;							      \
-      }									      \
-    else if (__builtin_expect ((ch & 0xfc) == 0xf8, 1))			      \
-      {									      \
-	/* We expect five bytes.  */					      \
-	cnt = 5;							      \
-	ch &= 0x03;							      \
-      }									      \
-    else								      \
-      {									      \
-	/* We expect six bytes.  */					      \
-	cnt = 6;							      \
-	ch &= 0x01;							      \
-      }									      \
-									      \
-    /* The first byte is already consumed.  */				      \
-    --cnt;								      \
-    while (++(*inptrp) < inend)						      \
-      {									      \
-	ch <<= 6;							      \
-	ch |= **inptrp & 0x3f;						      \
-	--cnt;								      \
-      }									      \
-									      \
-    /* Shift for the so far missing bytes.  */				      \
-    ch <<= cnt * 6;							      \
-									      \
-    /* Store the value.  */						      \
-    state->__value.__wch = ch;						      \
-  }
-
-#define UNPACK_BYTES \
-  {									      \
-    wint_t wch = state->__value.__wch;					      \
-    size_t ntotal;							      \
-    inlen = state->__count;						      \
-									      \
-    if (state->__value.__wch <= 0x7ff)					      \
-      {									      \
-	bytebuf[0] = 0xc0;						      \
-	ntotal = 2;							      \
-      }									      \
-    else if (__builtin_expect (state->__value.__wch <= 0xffff, 1))	      \
-      {									      \
-	bytebuf[0] = 0xe0;						      \
-	ntotal = 3;							      \
-      }									      \
-    else if (__builtin_expect (state->__value.__wch < 0x1fffff, 1))	      \
-      {									      \
-	bytebuf[0] = 0xf0;						      \
-	ntotal = 4;							      \
-      }									      \
-    else if (__builtin_expect (state->__value.__wch < 0x3ffffff, 1))	      \
-      {									      \
-	bytebuf[0] = 0xf8;						      \
-	ntotal = 5;							      \
-      }									      \
-    else								      \
-      {									      \
-	bytebuf[0] = 0xfc;						      \
-	ntotal = 6;							      \
-      }									      \
-									      \
-    do									      \
-      {									      \
-	if (--ntotal < inlen)						      \
-	  bytebuf[ntotal] = 0x80 | (wch & 0x3f);			      \
-	wch >>= 6;							      \
-      }									      \
-    while (ntotal > 1);							      \
-									      \
-    bytebuf[0] |= wch;							      \
-  }
-
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from UCS2 to the internal (UCS4-like) format.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		2
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		ucs2_internal_loop
-#define TO_LOOP			ucs2_internal_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_ucs2_internal
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint16_t u1 = *((const uint16_t *) inptr);				      \
-									      \
-    if (__builtin_expect (u1 >= 0xd800 && u1 < 0xe000, 0))		      \
-      {									      \
-	/* Surrogate characters in UCS-2 input are not valid.  Reject	      \
-	   them.  (Catching this here is not security relevant.)  */	      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-	inptr += 2;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-									      \
-    *((uint32_t *) outptr)++ = u1;					      \
-    inptr += 2;								      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from the internal (UCS4-like) format to UCS2.  */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		2
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_ucs2_loop
-#define TO_LOOP			internal_ucs2_loop /* This is not used.  */
-#define FUNCTION_NAME		__gconv_transform_internal_ucs2
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t val = *((const uint32_t *) inptr);				      \
-									      \
-    if (__builtin_expect (val >= 0x10000, 0))				      \
-      {									      \
-	UNICODE_TAG_HANDLER (val, 4);					      \
-	STANDARD_ERR_HANDLER (4);					      \
-      }									      \
-    else if (__builtin_expect (val >= 0xd800 && val < 0xe000, 0))	      \
-      {									      \
-	/* Surrogate characters in UCS-4 input are not valid.		      \
-	   We must catch this, because the UCS-2 output might be	      \
-	   interpreted as UTF-16 by other programs.  If we let		      \
-	   surrogates pass through, attackers could make a security	      \
-	   hole exploit by synthesizing any desired plane 1-16		      \
-	   character.  */						      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-	inptr += 4;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-    else 								      \
-      {									      \
-	*((uint16_t *) outptr)++ = val;					      \
-	inptr += 4;							      \
-      }									      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from UCS2 in other endianness to the internal (UCS4-like) format. */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		2
-#define MIN_NEEDED_TO		4
-#define FROM_DIRECTION		1
-#define FROM_LOOP		ucs2reverse_internal_loop
-#define TO_LOOP			ucs2reverse_internal_loop/* This is not used.*/
-#define FUNCTION_NAME		__gconv_transform_ucs2reverse_internal
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint16_t u1 = bswap_16 (*((const uint16_t *) inptr));		      \
-									      \
-    if (__builtin_expect (u1 >= 0xd800 && u1 < 0xe000, 0))		      \
-      {									      \
-	/* Surrogate characters in UCS-2 input are not valid.  Reject	      \
-	   them.  (Catching this here is not security relevant.)  */	      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-	inptr += 2;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-									      \
-    *((uint32_t *) outptr)++ = u1;					      \
-    inptr += 2;								      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
-
-
-/* Convert from the internal (UCS4-like) format to UCS2 in other endianness. */
-#define DEFINE_INIT		0
-#define DEFINE_FINI		0
-#define MIN_NEEDED_FROM		4
-#define MIN_NEEDED_TO		2
-#define FROM_DIRECTION		1
-#define FROM_LOOP		internal_ucs2reverse_loop
-#define TO_LOOP			internal_ucs2reverse_loop/* This is not used.*/
-#define FUNCTION_NAME		__gconv_transform_internal_ucs2reverse
-#define ONE_DIRECTION		1
-
-#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
-#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
-#define LOOPFCT			FROM_LOOP
-#define BODY \
-  {									      \
-    uint32_t val = *((const uint32_t *) inptr);				      \
-    if (__builtin_expect (val >= 0x10000, 0))				      \
-      {									      \
-	UNICODE_TAG_HANDLER (val, 4);					      \
-	STANDARD_ERR_HANDLER (4);					      \
-      }									      \
-    else if (__builtin_expect (val >= 0xd800 && val < 0xe000, 0))	      \
-      {									      \
-	/* Surrogate characters in UCS-4 input are not valid.		      \
-	   We must catch this, because the UCS-2 output might be	      \
-	   interpreted as UTF-16 by other programs.  If we let		      \
-	   surrogates pass through, attackers could make a security	      \
-	   hole exploit by synthesizing any desired plane 1-16		      \
-	   character.  */						      \
-	if (! ignore_errors_p ())					      \
-	  {								      \
-	    result = __GCONV_ILLEGAL_INPUT;				      \
-	    break;							      \
-	  }								      \
-	inptr += 4;							      \
-	++*irreversible;						      \
-	continue;							      \
-      }									      \
-    else 								      \
-      {									      \
-	*((uint16_t *) outptr)++ = bswap_16 (val);			      \
-	inptr += 4;							      \
-      }									      \
-  }
-#define LOOP_NEED_FLAGS
-#include <iconv/loop.c>
-#include <iconv/skeleton.c>
diff --git a/newlib/libc/sys/linux/iconv/gconv_trans.c b/newlib/libc/sys/linux/iconv/gconv_trans.c
deleted file mode 100644
index dcc1004e1..000000000
--- a/newlib/libc/sys/linux/iconv/gconv_trans.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* Transliteration using the locale's data.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <dlfcn.h>
-#include <search.h>
-#include <stdint.h>
-#include <string.h>
-#include <stdlib.h>
-#include <dirent.h>
-#include <ltdl.h>
-
-#include "gconv_int.h"
-#include "localeinfo.h"
-
-int
-__gconv_transliterate (struct __gconv_step *step,
-		       struct __gconv_step_data *step_data,
-		       void *trans_data __attribute__ ((unused)),
-		       const unsigned char *inbufstart,
-		       const unsigned char **inbufp,
-		       const unsigned char *inbufend,
-		       unsigned char **outbufstart, size_t *irreversible)
-{
-  return 0;
-}
-
-
-/* Structure to represent results of found (or not) transliteration
-   modules.  */
-struct known_trans
-{
-  /* This structure must remain the first member.  */
-  struct trans_struct info;
-
-  char *fname;
-  void *handle;
-  int open_count;
-};
-
-
-/* Tree with results of previous calls to __gconv_translit_find.  */
-static void *search_tree;
-
-/* We modify global data.   */
-__LOCK_INIT(static, lock);
-
-/* Compare two transliteration entries.  */
-static int
-trans_compare (const void *p1, const void *p2)
-{
-  const struct known_trans *s1 = (const struct known_trans *) p1;
-  const struct known_trans *s2 = (const struct known_trans *) p2;
-
-  return strcmp (s1->info.name, s2->info.name);
-}
-
-
-/* Open (maybe reopen) the module named in the struct.  Get the function
-   and data structure pointers we need.  */
-static int
-open_translit (struct known_trans *trans)
-{
-  __gconv_trans_query_fct queryfct;
-
-  trans->handle = __libc_dlopen (trans->fname);
-  if (trans->handle == NULL)
-    /* Not available.  */
-    return 1;
-
-  /* Find the required symbol.  */
-  queryfct = __libc_dlsym (trans->handle, "gconv_trans_context");
-  if (queryfct == NULL)
-    {
-      /* We cannot live with that.  */
-    close_and_out:
-      __libc_dlclose (trans->handle);
-      trans->handle = NULL;
-      return 1;
-    }
-
-  /* Get the context.  */
-  if (queryfct (trans->info.name, &trans->info.csnames, &trans->info.ncsnames)
-      != 0)
-    goto close_and_out;
-
-  /* Of course we also have to have the actual function.  */
-  trans->info.trans_fct = __libc_dlsym (trans->handle, "gconv_trans");
-  if (trans->info.trans_fct == NULL)
-    goto close_and_out;
-
-  /* Now the optional functions.  */
-  trans->info.trans_init_fct =
-    __libc_dlsym (trans->handle, "gconv_trans_init");
-  trans->info.trans_context_fct =
-    __libc_dlsym (trans->handle, "gconv_trans_context");
-  trans->info.trans_end_fct =
-    __libc_dlsym (trans->handle, "gconv_trans_end");
-
-  trans->open_count = 1;
-
-  return 0;
-}
-
-
-int
-internal_function
-__gconv_translit_find (struct trans_struct *trans)
-{
-  struct known_trans **found;
-  const struct path_elem *runp;
-  int res = 1;
-
-  /* We have to have a name.  */
-  assert (trans->name != NULL);
-
-  /* Acquire the lock.  */
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(lock);
-#endif
-
-  /* See whether we know this module already.  */
-  found = tfind (trans, &search_tree, trans_compare);
-  if (found != NULL)
-    {
-      /* Is this module available?  */
-      if ((*found)->handle != NULL)
-	{
-	  /* Maybe we have to reopen the file.  */
-	  if ((*found)->handle != (void *) -1)
-	    /* The object is not unloaded.  */
-	    res = 0;
-	  else if (open_translit (*found) == 0)
-	    {
-	      /* Copy the data.  */
-	      *trans = (*found)->info;
-	      (*found)->open_count++;
-	      res = 0;
-	    }
-	}
-    }
-  else
-    {
-      size_t name_len = strlen (trans->name) + 1;
-      int need_so = 0;
-      struct known_trans *newp;
-
-      /* We have to continue looking for the module.  */
-      if (__gconv_path_elem == NULL)
-	__gconv_get_path ();
-
-      /* See whether we have to append .so.  */
-      if (name_len <= 4 || memcmp (&trans->name[name_len - 4], ".so", 3) != 0)
-	need_so = 1;
-
-      /* Create a new entry.  */
-      newp = (struct known_trans *) malloc (sizeof (struct known_trans)
-					    + (__gconv_max_path_elem_len
-					       + name_len + 3)
-					    + name_len);
-      if (newp != NULL)
-	{
-	  char *cp;
-
-	  /* Clear the struct.  */
-	  memset (newp, '\0', sizeof (struct known_trans));
-
-	  /* Store a copy of the module name.  */
-	  newp->info.name = cp = (char *) (newp + 1);
-	  cp = memcpy (cp, trans->name, name_len);
-          cp += name_len;
-
-	  newp->fname = cp;
-
-	  /* Search in all the directories.  */
-	  for (runp = __gconv_path_elem; runp->name != NULL; ++runp)
-	    {
-              strcpy ((char *) newp->fname, runp->name);
-              while(newp->fname != '\0') newp->fname++;
-
-	      cp = memcpy (newp->fname,
-                            trans->name, name_len);
-              cp += name_len;
-	      if (need_so)
-		memcpy (cp, ".so", sizeof (".so"));
-
-	      if (open_translit (newp) == 0)
-		{
-		  /* We found a module.  */
-		  res = 0;
-		  break;
-		}
-	    }
-
-	  if (res)
-	    newp->fname = NULL;
-
-	  /* In any case we'll add the entry to our search tree.  */
-	  if (tsearch (newp, &search_tree, trans_compare) == NULL)
-	    {
-	      /* Yickes, this should not happen.  Unload the object.  */
-	      res = 1;
-	      /* XXX unload here.  */
-	    }
-	}
-    }
-
-#ifdef HAVE_DD_LOCK
-  __lock_release(lock);
-#endif
-
-  return res;
-}
diff --git a/newlib/libc/sys/linux/iconv/hash-string.h b/newlib/libc/sys/linux/iconv/hash-string.h
deleted file mode 100644
index ae4bcfb3e..000000000
--- a/newlib/libc/sys/linux/iconv/hash-string.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Implements a string hashing function.
-   Copyright (C) 1995, 1997, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-/* We assume to have `unsigned long int' value with at least 32 bits.  */
-#define HASHWORDBITS 32
-
-
-/* Defines the so called `hashpjw' function by P.J. Weinberger
-   [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
-   1986, 1987 Bell Telephone Laboratories, Inc.]  */
-static unsigned long int hash_string PARAMS ((const char *__str_param));
-
-static inline unsigned long int
-hash_string (str_param)
-     const char *str_param;
-{
-  unsigned long int hval, g;
-  const char *str = str_param;
-
-  /* Compute the hash value for the given string.  */
-  hval = 0;
-  while (*str != '\0')
-    {
-      hval <<= 4;
-      hval += (unsigned long int) *str++;
-      g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
-      if (g != 0)
-	{
-	  hval ^= g >> (HASHWORDBITS - 8);
-	  hval ^= g;
-	}
-    }
-  return hval;
-}
diff --git a/newlib/libc/sys/linux/iconv/iconv.c b/newlib/libc/sys/linux/iconv/iconv.c
deleted file mode 100644
index d0f5528f5..000000000
--- a/newlib/libc/sys/linux/iconv/iconv.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Convert characters in input buffer using conversion descriptor to
-   output buffer.
-   Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h> /* for NULL */
-#include <errno.h>
-#include <iconv.h>
-
-#include <gconv_int.h>
-
-#include <assert.h>
-
-
-size_t
-iconv (iconv_t cd, char **inbuf, size_t *inbytesleft, char **outbuf,
-       size_t *outbytesleft)
-{
-  __gconv_t gcd = (__gconv_t) cd;
-  char *outstart = outbuf ? *outbuf : NULL;
-  size_t irreversible;
-  int result;
-
-  if (__builtin_expect (inbuf == NULL || *inbuf == NULL, 0))
-    {
-      if (outbuf == NULL || *outbuf == NULL)
-	result = __gconv (gcd, NULL, NULL, NULL, NULL, &irreversible);
-      else
-	result = __gconv (gcd, NULL, NULL, (unsigned char **) outbuf,
-			  (unsigned char *) (outstart + *outbytesleft),
-			  &irreversible);
-    }
-  else
-    {
-      const char *instart = *inbuf;
-
-      result = __gconv (gcd, (const unsigned char **) inbuf,
-			(const unsigned char *)  (*inbuf + *inbytesleft),
-			(unsigned char **) outbuf,
-			(unsigned char *) (*outbuf + *outbytesleft),
-			&irreversible);
-
-      *inbytesleft -= *inbuf - instart;
-    }
-  if (outstart != NULL)
-    *outbytesleft -= *outbuf - outstart;
-
-  switch (__builtin_expect (result, __GCONV_OK))
-    {
-    case __GCONV_ILLEGAL_DESCRIPTOR:
-      __set_errno (EBADF);
-      irreversible = (size_t) -1L;
-      break;
-
-    case __GCONV_ILLEGAL_INPUT:
-      __set_errno (EILSEQ);
-      irreversible = (size_t) -1L;
-      break;
-
-    case __GCONV_FULL_OUTPUT:
-      __set_errno (E2BIG);
-      irreversible = (size_t) -1L;
-      break;
-
-    case __GCONV_INCOMPLETE_INPUT:
-      __set_errno (EINVAL);
-      irreversible = (size_t) -1L;
-      break;
-
-    case __GCONV_EMPTY_INPUT:
-    case __GCONV_OK:
-      /* Nothing.  */
-      break;
-
-    default:
-      assert (!"Nothing like this should happen");
-    }
-
-  return irreversible;
-}
diff --git a/newlib/libc/sys/linux/iconv/iconv.h b/newlib/libc/sys/linux/iconv/iconv.h
deleted file mode 100644
index 5a795dc5d..000000000
--- a/newlib/libc/sys/linux/iconv/iconv.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _ICONV_H
-#define _ICONV_H	1
-
-#include <features.h>
-#define __need_size_t
-#include <stddef.h>
-
-
-__BEGIN_DECLS
-
-/* Identifier for conversion method from one codeset to another.  */
-typedef void *iconv_t;
-
-
-/* Allocate descriptor for code conversion from codeset FROMCODE to
-   codeset TOCODE.  */
-extern iconv_t iconv_open (__const char *__tocode, __const char *__fromcode)
-     __THROW;
-
-/* Convert at most *INBYTESLEFT bytes from *INBUF according to the
-   code conversion algorithm specified by CD and place up to
-   *OUTBYTESLEFT bytes in buffer at *OUTBUF.  */
-extern size_t iconv (iconv_t __cd, char **__restrict __inbuf,
-		     size_t *__restrict __inbytesleft,
-		     char **__restrict __outbuf,
-		     size_t *__restrict __outbytesleft);
-
-/* Free resources allocated for descriptor CD for code conversion.  */
-extern int iconv_close (iconv_t __cd) __THROW;
-
-__END_DECLS
-
-#endif /* iconv.h */
diff --git a/newlib/libc/sys/linux/iconv/iconv_charmap.c b/newlib/libc/sys/linux/iconv/iconv_charmap.c
deleted file mode 100644
index 141c8eca2..000000000
--- a/newlib/libc/sys/linux/iconv/iconv_charmap.c
+++ /dev/null
@@ -1,563 +0,0 @@
-/* Convert using charmaps and possibly iconv().
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <errno.h>
-#include <error.h>
-#include <fcntl.h>
-#include <iconv.h>
-#include <libintl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-
-#include "iconv_prog.h"
-
-
-/* Prototypes for a few program-wide used functions.  */
-extern void *xmalloc (size_t __n);
-extern void *xcalloc (size_t __n, size_t __s);
-
-
-struct convtable
-{
-  int term[256 / 8];
-  union
-  {
-    struct convtable *sub;
-    struct charseq *out;
-  } val[256];
-};
-
-
-static inline struct convtable *
-allocate_table (void)
-{
-  return (struct convtable *) xcalloc (1, sizeof (struct convtable));
-}
-
-
-static inline int
-is_term (struct convtable *tbl, unsigned int idx)
-{
-  return tbl->term[idx / 8] & (1 << (idx % 8));
-}
-
-
-static inline void
-clear_term (struct convtable *tbl, unsigned int idx)
-{
-  tbl->term[idx / 8] &= ~(1 << (idx % 8));
-}
-
-
-static inline void
-set_term (struct convtable *tbl, unsigned int idx)
-{
-  tbl->term[idx / 8] |= 1 << (idx % 8);
-}
-
-
-/* Generate the conversion table.  */
-static struct convtable *use_from_charmap (struct charmap_t *from_charmap,
-					   const char *to_code);
-static struct convtable *use_to_charmap (const char *from_code,
-					 struct charmap_t *to_charmap);
-static struct convtable *use_both_charmaps (struct charmap_t *from_charmap,
-					    struct charmap_t *to_charmap);
-
-/* Prototypes for the functions doing the actual work.  */
-static int process_block (struct convtable *tbl, char *addr, size_t len,
-			  FILE *output);
-static int process_fd (struct convtable *tbl, int fd, FILE *output);
-static int process_file (struct convtable *tbl, FILE *input, FILE *output);
-
-
-int
-charmap_conversion (const char *from_code, struct charmap_t *from_charmap,
-		    const char *to_code, struct charmap_t *to_charmap,
-		    int argc, int remaining, char *argv[], FILE *output)
-{
-  struct convtable *cvtbl;
-  int status = EXIT_SUCCESS;
-
-  /* We have three different cases to handle:
-
-     - both, from_charmap and to_charmap, are available.  This means we
-       can assume that the symbolic names match and use them to create
-       the mapping.
-
-     - only from_charmap is available.  In this case we can only hope that
-       the symbolic names used are of the <Uxxxx> form in which case we
-       can use a UCS4->"to_code" iconv() conversion for the second step.
-
-     - only to_charmap is available.  This is similar, only that we would
-       use iconv() for the "to_code"->UCS4 conversion.
-
-       We first create a table which maps input bytes into output bytes.
-       Once this is done we can handle all three of the cases above
-       equally.  */
-  if (from_charmap != NULL)
-    {
-      if (to_charmap == NULL)
-	cvtbl = use_from_charmap (from_charmap, to_code);
-      else
-	cvtbl = use_both_charmaps (from_charmap, to_charmap);
-    }
-  else
-    {
-      assert (to_charmap != NULL);
-      cvtbl = use_to_charmap (from_code, to_charmap);
-    }
-
-  /* If we couldn't generate a table stop now.  */
-  if (cvtbl == NULL)
-    return EXIT_FAILURE;
-
-  /* We can now start the conversion.  */
-  if (remaining == argc)
-    {
-      if (process_file (cvtbl, stdin, output) != 0)
-	status = EXIT_FAILURE;
-    }
-  else
-    do
-      {
-	struct stat st;
-	char *addr;
-	int fd;
-
-	if (verbose)
-	  printf ("%s:\n", argv[remaining]);
-	if (strcmp (argv[remaining], "-") == 0)
-	  fd = 0;
-	else
-	  {
-	    fd = open (argv[remaining], O_RDONLY);
-
-	    if (fd == -1)
-	      {
-		error (0, errno, _("cannot open input file `%s'"),
-		       argv[remaining]);
-		status = EXIT_FAILURE;
-		continue;
-	      }
-	  }
-
-#ifdef _POSIX_MAPPED_FILES
-	/* We have possibilities for reading the input file.  First try
-	   to mmap() it since this will provide the fastest solution.  */
-	if (fstat (fd, &st) == 0
-	    && ((addr = mmap (NULL, st.st_size, PROT_READ, MAP_PRIVATE,
-			      fd, 0)) != MAP_FAILED))
-	  {
-	    /* Yes, we can use mmap().  The descriptor is not needed
-	       anymore.  */
-	    if (close (fd) != 0)
-	      error (EXIT_FAILURE, errno,
-		     _("error while closing input `%s'"), argv[remaining]);
-
-	    if (process_block (cvtbl, addr, st.st_size, output) < 0)
-	      {
-		/* Something went wrong.  */
-		status = EXIT_FAILURE;
-
-		/* We don't need the input data anymore.  */
-		munmap ((void *) addr, st.st_size);
-
-		/* We cannot go on with producing output since it might
-		   lead to problem because the last output might leave
-		   the output stream in an undefined state.  */
-		break;
-	      }
-
-	    /* We don't need the input data anymore.  */
-	    munmap ((void *) addr, st.st_size);
-	  }
-	else
-#endif	/* _POSIX_MAPPED_FILES */
-	  {
-	    /* Read the file in pieces.  */
-	    if (process_fd (cvtbl, fd, output) != 0)
-	      {
-		/* Something went wrong.  */
-		status = EXIT_FAILURE;
-
-		/* We don't need the input file anymore.  */
-		close (fd);
-
-		/* We cannot go on with producing output since it might
-		   lead to problem because the last output might leave
-		   the output stream in an undefined state.  */
-		break;
-	      }
-
-	    /* Now close the file.  */
-	    close (fd);
-	  }
-      }
-    while (++remaining < argc);
-
-  /* All done.  */
-  return status;
-}
-
-
-static void
-add_bytes (struct convtable *tbl, struct charseq *in, struct charseq *out)
-{
-  int n = 0;
-  unsigned int byte;
-
-  assert (in->nbytes > 0);
-
-  byte = ((unsigned char *) in->bytes)[n];
-  while (n + 1 < in->nbytes)
-    {
-      if (is_term (tbl, byte) || tbl->val[byte].sub == NULL)
-	{
-	  /* Note that we simply ignore a definition for a byte sequence
-	     which is also the prefix for a longer one.  */
-	  clear_term (tbl, byte);
-	  tbl->val[byte].sub =
-	    (struct convtable *) xcalloc (1, sizeof (struct convtable));
-	}
-
-      tbl = tbl->val[byte].sub;
-
-      byte = ((unsigned char *) in->bytes)[++n];
-    }
-
-  /* Only add the new sequence if there is none yet and the byte sequence
-     is not part of an even longer one.  */
-  if (! is_term (tbl, byte) && tbl->val[byte].sub == NULL)
-    {
-      set_term (tbl, byte);
-      tbl->val[byte].out = out;
-    }
-}
-
-
-static struct convtable *
-use_from_charmap (struct charmap_t *from_charmap, const char *to_code)
-{
-  /* We iterate over all entries in the from_charmap and for those which
-     have a known UCS4 representation we use an iconv() call to determine
-     the mapping to the to_code charset.  */
-  struct convtable *rettbl;
-  iconv_t cd;
-  void *ptr = NULL;
-  const void *key;
-  size_t keylen;
-  void *data;
-
-  cd = iconv_open (to_code, "WCHAR_T");
-  if (cd == (iconv_t) -1)
-    /* We cannot do anything.  */
-    return NULL;
-
-  rettbl = allocate_table ();
-
-  while (iterate_table (&from_charmap->char_table, &ptr, &key, &keylen, &data)
-	 >= 0)
-    {
-      struct charseq *in = (struct charseq *) data;
-
-      if (in->ucs4 != UNINITIALIZED_CHAR_VALUE)
-	{
-	  /* There is a chance.  Try the iconv module.  */
-	  wchar_t inbuf[1] = { in->ucs4 };
-	  unsigned char outbuf[64];
-	  char *inptr = (char *) inbuf;
-	  size_t inlen = sizeof (inbuf);
-	  char *outptr = (char *) outbuf;
-	  size_t outlen = sizeof (outbuf);
-
-	  (void) iconv (cd, &inptr, &inlen, &outptr, &outlen);
-
-	  if (outptr != (char *) outbuf)
-	    {
-	      /* We got some output.  Good, use it.  */
-	      struct charseq *newp;
-
-	      outlen = sizeof (outbuf) - outlen;
-	      assert ((char *) outbuf + outlen == outptr);
-
-	      newp = (struct charseq *) xmalloc (sizeof (struct charseq)
-						 + outlen);
-	      newp->name = in->name;
-	      newp->ucs4 = in->ucs4;
-	      newp->nbytes = outlen;
-	      memcpy (newp->bytes, outbuf, outlen);
-
-	      add_bytes (rettbl, in, newp);
-	    }
-
-	  /* Clear any possible state left behind.  */
-	  (void) iconv (cd, NULL, NULL, NULL, NULL);
-	}
-    }
-
-  iconv_close (cd);
-
-  return rettbl;
-}
-
-
-static struct convtable *
-use_to_charmap (const char *from_code, struct charmap_t *to_charmap)
-{
-  /* We iterate over all entries in the to_charmap and for those which
-     have a known UCS4 representation we use an iconv() call to determine
-     the mapping to the from_code charset.  */
-  struct convtable *rettbl;
-  iconv_t cd;
-  void *ptr = NULL;
-  const void *key;
-  size_t keylen;
-  void *data;
-
-  /* Note that the conversion we use here is the reverse direction.  Without
-     exhaustive search we cannot figure out which input yields the UCS4
-     character we are looking for.  Therefore we determine it the other
-     way round.  */
-  cd = iconv_open (from_code, "WCHAR_T");
-  if (cd == (iconv_t) -1)
-    /* We cannot do anything.  */
-    return NULL;
-
-  rettbl = allocate_table ();
-
-  while (iterate_table (&to_charmap->char_table, &ptr, &key, &keylen, &data)
-	 >= 0)
-    {
-      struct charseq *out = (struct charseq *) data;
-
-      if (out->ucs4 != UNINITIALIZED_CHAR_VALUE)
-	{
-	  /* There is a chance.  Try the iconv module.  */
-	  wchar_t inbuf[1] = { out->ucs4 };
-	  unsigned char outbuf[64];
-	  char *inptr = (char *) inbuf;
-	  size_t inlen = sizeof (inbuf);
-	  char *outptr = (char *) outbuf;
-	  size_t outlen = sizeof (outbuf);
-
-	  (void) iconv (cd, &inptr, &inlen, &outptr, &outlen);
-
-	  if (outptr != (char *) outbuf)
-	    {
-	      /* We got some output.  Good, use it.  */
-	      struct charseq *newp;
-
-	      outlen = sizeof (outbuf) - outlen;
-	      assert ((char *) outbuf + outlen == outptr);
-
-	      newp = (struct charseq *) xmalloc (sizeof (struct charseq)
-						 + outlen);
-	      newp->name = out->name;
-	      newp->ucs4 = out->ucs4;
-	      newp->nbytes = outlen;
-	      memcpy (newp->bytes, outbuf, outlen);
-
-	      add_bytes (rettbl, newp, out);
-	    }
-
-	  /* Clear any possible state left behind.  */
-	  (void) iconv (cd, NULL, NULL, NULL, NULL);
-	}
-    }
-
-  iconv_close (cd);
-
-  return rettbl;
-}
-
-
-static struct convtable *
-use_both_charmaps (struct charmap_t *from_charmap,
-		   struct charmap_t *to_charmap)
-{
-  /* In this case we iterate over all the entries in the from_charmap,
-     determine the internal name, and find an appropriate entry in the
-     to_charmap (if it exists).  */
-  struct convtable *rettbl = allocate_table ();
-  void *ptr = NULL;
-  const void *key;
-  size_t keylen;
-  void *data;
-
-  while (iterate_table (&from_charmap->char_table, &ptr, &key, &keylen, &data)
-	 >= 0)
-    {
-      struct charseq *in = (struct charseq *) data;
-      struct charseq *out = charmap_find_value (to_charmap, key, keylen);
-
-      if (out != NULL)
-	add_bytes (rettbl, in, out);
-    }
-
-  return rettbl;
-}
-
-
-static int
-process_block (struct convtable *tbl, char *addr, size_t len, FILE *output)
-{
-  size_t n = 0;
-
-  while (n < len)
-    {
-      struct convtable *cur = tbl;
-      unsigned char *curp = (unsigned char *) addr;
-      unsigned int byte = *curp;
-      int cnt;
-      struct charseq *out;
-
-      while (! is_term (cur, byte))
-	if (cur->val[byte].sub == NULL)
-	  {
-	    /* This is a invalid sequence.  Skip the first byte if we are
-	       ignoring errors.  Otherwise punt.  */
-	    if (! omit_invalid)
-	      {
-		error (0, 0, _("illegal input sequence at position %Zd"), n);
-		return -1;
-	      }
-
-	    n -= curp - (unsigned char *) addr;
-
-	    byte = *(curp = (unsigned char *) ++addr);
-	    if (++n >= len)
-	      /* All converted.  */
-	      return 0;
-
-	    cur = tbl;
-	  }
-	else
-	  {
-	    cur = cur->val[byte].sub;
-
-	    if (++n >= len)
-	      {
-		error (0, 0, _("\
-incomplete character or shift sequence at end of buffer"));
-		return -1;
-	      }
-
-	    byte = *++curp;
-	  }
-
-      /* We found a final byte.  Write the output bytes.  */
-      out = cur->val[byte].out;
-      for (cnt = 0; cnt < out->nbytes; ++cnt)
-	fputc_unlocked (out->bytes[cnt], output);
-
-      addr = (char *) curp + 1;
-      ++n;
-    }
-
-  return 0;
-}
-
-
-static int
-process_fd (struct convtable *tbl, int fd, FILE *output)
-{
-  /* we have a problem with reading from a desriptor since we must not
-     provide the iconv() function an incomplete character or shift
-     sequence at the end of the buffer.  Since we have to deal with
-     arbitrary encodings we must read the whole text in a buffer and
-     process it in one step.  */
-  static char *inbuf = NULL;
-  static size_t maxlen = 0;
-  char *inptr = NULL;
-  size_t actlen = 0;
-
-  while (actlen < maxlen)
-    {
-      ssize_t n = read (fd, inptr, maxlen - actlen);
-
-      if (n == 0)
-	/* No more text to read.  */
-	break;
-
-      if (n == -1)
-	{
-	  /* Error while reading.  */
-	  error (0, errno, _("error while reading the input"));
-	  return -1;
-	}
-
-      inptr += n;
-      actlen += n;
-    }
-
-  if (actlen == maxlen)
-    while (1)
-      {
-	ssize_t n;
-
-	/* Increase the buffer.  */
-	maxlen += 32768;
-	inbuf = realloc (inbuf, maxlen);
-	if (inbuf == NULL)
-	  error (0, errno, _("unable to allocate buffer for input"));
-	inptr = inbuf + actlen;
-
-	do
-	  {
-	    n = read (fd, inptr, maxlen - actlen);
-
-	    if (n == 0)
-	      /* No more text to read.  */
-	      break;
-
-	    if (n == -1)
-	      {
-		/* Error while reading.  */
-		error (0, errno, _("error while reading the input"));
-		return -1;
-	      }
-
-	    inptr += n;
-	    actlen += n;
-	  }
-	while (actlen < maxlen);
-
-	if (n == 0)
-	  /* Break again so we leave both loops.  */
-	  break;
-      }
-
-  /* Now we have all the input in the buffer.  Process it in one run.  */
-  return process_block (tbl, inbuf, actlen, output);
-}
-
-
-static int
-process_file (struct convtable *tbl, FILE *input, FILE *output)
-{
-  /* This should be safe since we use this function only for `stdin' and
-     we haven't read anything so far.  */
-  return process_fd (tbl, fileno (input), output);
-}
diff --git a/newlib/libc/sys/linux/iconv/iconv_close.c b/newlib/libc/sys/linux/iconv/iconv_close.c
deleted file mode 100644
index 038acc69e..000000000
--- a/newlib/libc/sys/linux/iconv/iconv_close.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Release any resource associated with given conversion descriptor.
-   Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <iconv.h>
-
-#include <gconv_int.h>
-
-
-int
-iconv_close (iconv_t cd)
-{
-  if (__builtin_expect (cd == (iconv_t *) -1L, 0))
-    {
-      __set_errno (EBADF);
-      return -1;
-    }
-
-  return __gconv_close ((__gconv_t) cd) ? -1 : 0;
-}
diff --git a/newlib/libc/sys/linux/iconv/iconv_open.c b/newlib/libc/sys/linux/iconv/iconv_open.c
deleted file mode 100644
index ac44af80c..000000000
--- a/newlib/libc/sys/linux/iconv/iconv_open.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* Get descriptor for character set conversion.
-   Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <iconv.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <gconv_int.h>
-#include "gconv_charset.h"
-
-
-iconv_t
-iconv_open (const char *tocode, const char *fromcode)
-{
-  char *tocode_conv;
-  char *fromcode_conv;
-  size_t tocode_len;
-  size_t fromcode_len;
-  __gconv_t cd;
-  int res;
-
-  /* Normalize the name.  We remove all characters beside alpha-numeric,
-     '_', '-', '/', and '.'.  */
-  tocode_len = strlen (tocode);
-  tocode_conv = alloca (tocode_len + 3);
-  strip (tocode_conv, tocode);
-  tocode = tocode_conv[2] == '\0' ? upstr (tocode_conv, tocode) : tocode_conv;
-
-  fromcode_len = strlen (fromcode);
-  fromcode_conv = alloca (fromcode_len + 3);
-  strip (fromcode_conv, fromcode);
-  fromcode = (fromcode_conv[2] == '\0'
-	      ? upstr (fromcode_conv, fromcode) : fromcode_conv);
-
-  res = __gconv_open (tocode, fromcode, &cd, 0);
-
-  if (__builtin_expect (res, __GCONV_OK) != __GCONV_OK)
-    {
-      /* We must set the error number according to the specs.  */
-      if (res == __GCONV_NOCONV || res == __GCONV_NODB)
-	__set_errno (EINVAL);
-
-      return (iconv_t) -1;
-    }
-
-  return (iconv_t) cd;
-}
diff --git a/newlib/libc/sys/linux/iconv/iconvconfig.c b/newlib/libc/sys/linux/iconv/iconvconfig.c
deleted file mode 100644
index 8ad6c93e2..000000000
--- a/newlib/libc/sys/linux/iconv/iconvconfig.c
+++ /dev/null
@@ -1,1176 +0,0 @@
-/* Generate fastloading iconv module configuration files.
-   Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <argp.h>
-#include <assert.h>
-#include <error.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <libintl.h>
-#include <locale.h>
-#include <mcheck.h>
-#include <search.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <stdio_ext.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/cdefs.h>
-#include <sys/uio.h>
-
-#include "iconvconfig.h"
-
-/* Get libc version number.  */
-#include "../version.h"
-
-#define PACKAGE _libc_intl_domainname
-
-
-/* The hashing function we use.  */
-#include "../intl/hash-string.h"
-
-
-/* Types used.  */
-struct module
-{
-  char *fromname;
-  struct Strent *fromname_strent;
-  char *filename;
-  struct Strent *filename_strent;
-  const char *directory;
-  struct Strent *directory_strent;
-  struct module *next;
-  int cost;
-  struct Strent *toname_strent;
-  char toname[0];
-};
-
-struct alias
-{
-  char *fromname;
-  struct Strent *froment;
-  struct module *module;
-  struct Strent *toent;
-  char toname[0];
-};
-
-struct name
-{
-  const char *name;
-  struct Strent *strent;
-  int module_idx;
-  uint32_t hashval;
-};
-
-struct name_info
-{
-  const char *canonical_name;
-  struct Strent *canonical_strent;
-
-  struct module *from_internal;
-  struct module *to_internal;
-
-  struct other_conv_list
-  {
-    int dest_idx;
-    struct other_conv
-    {
-      gidx_t module_idx;
-      struct module *module;
-      struct other_conv *next;
-    } other_conv;
-    struct other_conv_list *next;
-  } *other_conv_list;
-};
-
-
-/* Name and version of program.  */
-static void print_version (FILE *stream, struct argp_state *state);
-void (*argp_program_version_hook) (FILE *, struct argp_state *) = print_version;
-
-/* Short description of program.  */
-static const char doc[] = N_("\
-Create fastloading iconv module configuration file.");
-
-/* Strings for arguments in help texts.  */
-static const char args_doc[] = N_("[DIR...]");
-
-/* Function to print some extra text in the help message.  */
-static char *more_help (int key, const char *text, void *input);
-
-/* Data structure to communicate with argp functions.  */
-static struct argp argp =
-{
-  NULL, NULL, args_doc, doc, NULL, more_help
-};
-
-
-/* The function doing the actual work.  */
-static int handle_dir (const char *dir);
-
-/* Add all known builtin conversions and aliases.  */
-static void add_builtins (void);
-
-/* Create list of all aliases without circular aliases.  */
-static void get_aliases (void);
-
-/* Create list of all modules.  */
-static void get_modules (void);
-
-/* Get list of all the names and thereby indexing them.  */
-static void generate_name_list (void);
-
-/* Collect information about all the names.  */
-static void generate_name_info (void);
-
-/* Write the output file.  */
-static int write_output (void);
-
-
-/* Search tree of the modules we know.  */
-static void *modules;
-
-/* Search tree of the aliases we know.  */
-static void *aliases;
-
-/* Search tree for name to index mapping.  */
-static void *names;
-
-/* Number of names we know about.  */
-static int nnames;
-
-/* List of all aliases.  */
-static struct alias **alias_list;
-static size_t nalias_list;
-static size_t nalias_list_max;
-
-/* List of all modules.  */
-static struct module **module_list;
-static size_t nmodule_list;
-static size_t nmodule_list_max;
-
-/* Names and information about them.  */
-static struct name_info *name_info;
-static size_t nname_info;
-
-/* Number of translations not from or to INTERNAL.  */
-static size_t nextra_modules;
-
-
-/* Names and aliases for the builtin transformations.  */
-static struct
-{
-  const char *from;
-  const char *to;
-} builtin_alias[] =
-  {
-#define BUILTIN_ALIAS(alias, real) \
-    { .from = alias, .to = real },
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT)
-#include <gconv_builtin.h>
-  };
-#undef BUILTIN_ALIAS
-#undef BUILTIN_TRANSFORMATION
-#define nbuiltin_alias (sizeof (builtin_alias) / sizeof (builtin_alias[0]))
-
-static struct
-{
-  const char *from;
-  const char *to;
-  const char *module;
-  int cost;
-} builtin_trans[] =
-  {
-#define BUILTIN_ALIAS(alias, real)
-#define BUILTIN_TRANSFORMATION(From, To, Cost, Name, Fct, MinF, MaxF, \
-			       MinT, MaxT) \
-    { .from = From, .to = To, .module = Name, .cost = Cost },
-#include <gconv_builtin.h>
-  };
-#define nbuiltin_trans (sizeof (builtin_trans) / sizeof (builtin_trans[0]))
-
-
-/* Filename extension for the modules.  */
-#ifndef MODULE_EXT
-# define MODULE_EXT ".so"
-#endif
-static const char gconv_module_ext[] = MODULE_EXT;
-
-
-extern void *xmalloc (size_t n) __attribute_malloc__;
-extern void *xcalloc (size_t n, size_t m) __attribute_malloc__;
-extern void *xrealloc (void *p, size_t n);
-
-
-/* C string table handling.  */
-struct Strtab;
-struct Strent;
-
-/* Create new C string table object in memory.  */
-extern struct Strtab *strtabinit (void);
-
-/* Free resources allocated for C string table ST.  */
-extern void strtabfree (struct Strtab *st);
-
-/* Add string STR (length LEN is != 0) to C string table ST.  */
-extern struct Strent *strtabadd (struct Strtab *st, const char *str,
-				 size_t len);
-
-/* Finalize string table ST and store size in *SIZE and return a pointer.  */
-extern void *strtabfinalize (struct Strtab *st, size_t *size);
-
-/* Get offset in string table for string associated with SE.  */
-extern size_t strtaboffset (struct Strent *se);
-
-/* String table we construct.  */
-static struct Strtab *strtab;
-
-
-
-int
-main (int argc, char *argv[])
-{
-  int remaining;
-  int status = 0;
-  char *path;
-  char *tp;
-  const char *old = GCONV_PATH;
-  size_t len = strlen (old) + 1;
-  char *new = alloca(len);
-
-  /* Enable memory use testing.  */
-  /* mcheck_pedantic (NULL); */
-  mtrace ();
-
-  /* Set locale via LC_ALL.  */
-  setlocale (LC_ALL, "");
-
-  /* Set the text message domain.  */
-  textdomain (_libc_intl_domainname);
-
-  /* Parse and process arguments.  */
-  argp_parse (&argp, argc, argv, 0, &remaining, NULL);
-
-  /* Initialize the string table.  */
-  strtab = strtabinit ();
-
-  /* Handle all directories mentioned.  */
-  while (remaining < argc)
-    status |= handle_dir (argv[remaining++]);
-
-  /* In any case also handle the standard directory.  */
-  path = memcpy (new, old, len);
-  tp = strtok (path, ":");
-  while (tp != NULL)
-    {
-      status |= handle_dir (tp);
-
-      tp = strtok (NULL, ":");
-    }
-
-  /* Add the builtin transformations and aliases without overwriting
-     anything.  */
-  add_builtins ();
-
-  /* Store aliases in an array.  */
-  get_aliases ();
-
-  /* Get list of all modules.  */
-  get_modules ();
-
-  /* Generate list of all the names we know to handle in some way.  */
-  generate_name_list ();
-
-  /* Now we know all the names we will handle, collect information
-     about them.  */
-  generate_name_info ();
-
-  /* Write the output file, but only if we haven't seen any error.  */
-  if (status == 0)
-    status = write_output ();
-  else
-    error (1, 0, _("no output file produced because warning were issued"));
-
-  return status;
-}
-
-
-static char *
-more_help (int key, const char *text, void *input)
-{
-  switch (key)
-    {
-    case ARGP_KEY_HELP_EXTRA:
-      /* We print some extra information.  */
-      return strdup (gettext ("\
-Report bugs using the `glibcbug' script to <bugs@gnu.org>.\n"));
-    default:
-      break;
-    }
-  return (char *) text;
-}
-
-
-/* Print the version information.  */
-static void
-print_version (FILE *stream, struct argp_state *state)
-{
-  fprintf (stream, "iconvconfig (GNU %s) %s\n", PACKAGE, VERSION);
-  fprintf (stream, gettext ("\
-Copyright (C) %s Free Software Foundation, Inc.\n\
-This is free software; see the source for copying conditions.  There is NO\n\
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\
-"), "2002");
-  fprintf (stream, gettext ("Written by %s.\n"), "Ulrich Drepper");
-}
-
-
-static int
-alias_compare (const void *p1, const void *p2)
-{
-  const struct alias *a1 = (const struct alias *) p1;
-  const struct alias *a2 = (const struct alias *) p2;
-
-  return strcmp (a1->fromname, a2->fromname);
-}
-
-
-static void
-new_alias (const char *fromname, size_t fromlen, const char *toname,
-	   size_t tolen)
-{
-  struct alias *newp;
-  void **inserted;
-
-  newp = (struct alias *) xmalloc (sizeof (struct alias) + fromlen + tolen);
-
-  newp->fromname = memcpy (newp->toname, toname, tolen);
-  newp->fromname += tolen;
-  memcpy (newp->fromname, fromname, fromlen);
-  newp->module = NULL;
-
-  inserted = (void **) tsearch (newp, &aliases, alias_compare);
-  if (inserted == NULL)
-    error (EXIT_FAILURE, errno, gettext ("while inserting in search tree"));
-  if (*inserted != newp)
-    /* Something went wrong, free this entry.  */
-    free (newp);
-  else
-    {
-      newp->froment = strtabadd (strtab, newp->fromname, fromlen);
-      newp->toent = strtabadd (strtab, newp->toname, tolen);
-    }
-}
-
-
-/* Add new alias.  */
-static void
-add_alias (char *rp)
-{
-  /* We now expect two more string.  The strings are normalized
-     (converted to UPPER case) and strored in the alias database.  */
-  char *from;
-  char *to;
-  char *wp;
-
-  while (isspace (*rp))
-    ++rp;
-  from = wp = rp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (*rp == '\0')
-    /* There is no `to' string on the line.  Ignore it.  */
-    return;
-  *wp++ = '\0';
-  to = ++rp;
-  while (isspace (*rp))
-    ++rp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (to == wp)
-    /* No `to' string, ignore the line.  */
-    return;
-  *wp++ = '\0';
-
-  assert (strlen (from) + 1 == to - from);
-  assert (strlen (to) + 1 == wp - to);
-
-  new_alias (from, to - from, to, wp - to);
-}
-
-
-static void
-append_alias (const void *nodep, VISIT value, int level)
-{
-  if (value != leaf && value != postorder)
-    return;
-
-  if (nalias_list_max == nalias_list)
-    {
-      nalias_list_max += 50;
-      alias_list = (struct alias **) xrealloc (alias_list,
-					       (nalias_list_max
-						* sizeof (struct alias *)));
-    }
-
-  alias_list[nalias_list++] = *(struct alias **) nodep;
-}
-
-
-static void
-get_aliases (void)
-{
-  twalk (aliases, append_alias);
-}
-
-
-static int
-module_compare (const void *p1, const void *p2)
-{
-  const struct module *m1 = (const struct module *) p1;
-  const struct module *m2 = (const struct module *) p2;
-  int result;
-
-  result = strcmp (m1->fromname, m2->fromname);
-  if (result == 0)
-    result = strcmp (m1->toname, m2->toname);
-
-  return result;
-}
-
-
-/* Create new module record.  */
-static void
-new_module (const char *fromname, size_t fromlen, const char *toname,
-	    size_t tolen, const char *directory,
-	    const char *filename, size_t filelen, int cost, size_t need_ext)
-{
-  struct module *new_module;
-  size_t dirlen = strlen (directory) + 1;
-  char *tmp;
-  void **inserted;
-
-  new_module = (struct module *) xmalloc (sizeof (struct module)
-					  + fromlen + tolen + filelen
-					  + need_ext);
-
-  new_module->fromname = memcpy (new_module->toname, toname, tolen);
-  new_module->fromname += tolen;
-
-  new_module->filename = memcpy (new_module->fromname, fromname, fromlen);
-  new_module->filename += fromlen;
-
-  new_module->cost = cost;
-  new_module->next = NULL;
-
-  tmp = memcpy (new_module->filename, filename, filelen);
-  tmp += filelen;
-
-  if (need_ext)
-    {
-      memcpy (tmp - 1, gconv_module_ext, need_ext + 1);
-      filelen += need_ext;
-    }
-  new_module->directory = directory;
-
-  /* Now insert the new module data structure in our search tree.  */
-  inserted = (void **) tsearch (new_module, &modules, module_compare);
-  if (inserted == NULL)
-    error (EXIT_FAILURE, errno, "while inserting in search tree");
-  if (*inserted != new_module)
-    free (new_module);
-  else
-    {
-      new_module->fromname_strent = strtabadd (strtab, new_module->fromname,
-					       fromlen);
-      new_module->toname_strent = strtabadd (strtab, new_module->toname,
-					     tolen);
-      new_module->filename_strent = strtabadd (strtab, new_module->filename,
-					       filelen);
-      new_module->directory_strent = strtabadd (strtab, directory, dirlen);
-    }
-}
-
-
-/* Add new module.  */
-static void
-internal_function
-add_module (char *rp, const char *directory)
-{
-  /* We expect now
-     1. `from' name
-     2. `to' name
-     3. filename of the module
-     4. an optional cost value
-  */
-  char *from;
-  char *to;
-  char *module;
-  char *wp;
-  int need_ext;
-  int cost;
-
-  while (isspace (*rp))
-    ++rp;
-  from = rp;
-  while (*rp != '\0' && !isspace (*rp))
-    {
-      *rp = toupper (*rp);
-      ++rp;
-    }
-  if (*rp == '\0')
-    return;
-  *rp++ = '\0';
-  to = wp = rp;
-  while (isspace (*rp))
-    ++rp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = toupper (*rp++);
-  if (*rp == '\0')
-    return;
-  *wp++ = '\0';
-  do
-    ++rp;
-  while (isspace (*rp));
-  module = wp;
-  while (*rp != '\0' && !isspace (*rp))
-    *wp++ = *rp++;
-  if (*rp == '\0')
-    {
-      /* There is no cost, use one by default.  */
-      *wp++ = '\0';
-      cost = 1;
-    }
-  else
-    {
-      /* There might be a cost value.  */
-      char *endp;
-
-      *wp++ = '\0';
-      cost = strtol (rp, &endp, 10);
-      if (rp == endp || cost < 1)
-	/* No useful information.  */
-	cost = 1;
-    }
-
-  if (module[0] == '\0')
-    /* No module name given.  */
-    return;
-
-  /* See whether we must add the ending.  */
-  need_ext = 0;
-  if (wp - module < sizeof (gconv_module_ext)
-      || memcmp (wp - sizeof (gconv_module_ext), gconv_module_ext,
-		 sizeof (gconv_module_ext)) != 0)
-    /* We must add the module extension.  */
-    need_ext = sizeof (gconv_module_ext) - 1;
-
-  assert (strlen (from) + 1 == to - from);
-  assert (strlen (to) + 1 == module - to);
-  assert (strlen (module) + 1 == wp - module);
-
-  new_module (from, to - from, to, module - to, directory, module, wp - module,
-	      cost, need_ext);
-}
-
-
-/* Read the config file and add the data for this directory to that.  */
-static int
-handle_dir (const char *dir)
-{
-  char *infile;
-  FILE *fp;
-  char *line = NULL;
-  size_t linelen = 0;
-  size_t dirlen = strlen (dir);
-  char *tmp;
-
-  if (dir[dirlen - 1] != '/')
-    {
-      char *newp = (char *) xmalloc (dirlen + 2);
-      dir = memcpy (newp, dir, dirlen);
-      newp[dirlen++] = '/';
-      newp[dirlen] = '\0';
-    }
-
-  infile = (char *) alloca (dirlen + sizeof "gconv-modules");
-  tmp = mempcpy (infile, dir, dirlen);
-  tmp += dirlen;
-  strcpy (tmp, "gconv-modules");
-
-  fp = fopen (infile, "r");
-  if (fp == NULL)
-    {
-      error (0, errno, "cannot open `%s'", infile);
-      return 1;
-    }
-
-  /* No threads present.  */
-  __fsetlocking (fp, FSETLOCKING_BYCALLER);
-
-  while (!feof_unlocked (fp))
-    {
-      char *rp, *endp, *word;
-      ssize_t n = __getdelim (&line, &linelen, '\n', fp);
-
-      if (n < 0)
-	/* An error occurred.  */
-	break;
-
-      rp = line;
-      /* Terminate the line (excluding comments or newline) with a NUL
-	 byte to simplify the following code.  */
-      endp = strchr (rp, '#');
-      if (endp != NULL)
-	*endp = '\0';
-      else
-	if (rp[n - 1] == '\n')
-	  rp[n - 1] = '\0';
-
-      while (isspace (*rp))
-	++rp;
-
-      /* If this is an empty line go on with the next one.  */
-      if (rp == endp)
-	continue;
-
-      word = rp;
-      while (*rp != '\0' && !isspace (*rp))
-	++rp;
-
-      if (rp - word == sizeof ("alias") - 1
-	  && memcmp (word, "alias", sizeof ("alias") - 1) == 0)
-	add_alias (rp);
-      else if (rp - word == sizeof ("module") - 1
-	       && memcmp (word, "module", sizeof ("module") - 1) == 0)
-	add_module (rp, dir);
-      /* else */
-	/* Otherwise ignore the line.  */
-    }
-
-  free (line);
-
-  fclose (fp);
-
-  return 0;
-}
-
-
-static void
-append_module (const void *nodep, VISIT value, int level)
-{
-  struct module *mo;
-
-  if (value != leaf && value != postorder)
-    return;
-
-  mo = *(struct module **) nodep;
-
-  if (nmodule_list > 0
-      && strcmp (module_list[nmodule_list - 1]->fromname, mo->fromname) == 0)
-    {
-      /* Same name.  */
-      mo->next = module_list[nmodule_list - 1];
-      module_list[nmodule_list - 1] = mo;
-
-      return;
-    }
-
-  if (nmodule_list_max == nmodule_list)
-    {
-      nmodule_list_max += 50;
-      module_list = (struct module **) xrealloc (module_list,
-						 (nmodule_list_max
-						  * sizeof (struct module *)));
-    }
-
-  module_list[nmodule_list++] = mo;
-}
-
-
-static void
-get_modules (void)
-{
-  twalk (modules, append_module);
-}
-
-
-static void
-add_builtins (void)
-{
-  size_t cnt;
-
-  /* Add all aliases.  */
-  for (cnt = 0; cnt < nbuiltin_alias; ++cnt)
-    new_alias (builtin_alias[cnt].from,
-	       strlen (builtin_alias[cnt].from) + 1,
-	       builtin_alias[cnt].to,
-	       strlen (builtin_alias[cnt].to) + 1);
-
-  /* add the builtin transformations.  */
-  for (cnt = 0; cnt < nbuiltin_trans; ++cnt)
-    new_module (builtin_trans[cnt].from,
-		strlen (builtin_trans[cnt].from) + 1,
-		builtin_trans[cnt].to,
-		strlen (builtin_trans[cnt].to) + 1,
-		"", builtin_trans[cnt].module,
-		strlen (builtin_trans[cnt].module) + 1,
-		builtin_trans[cnt].cost, 0);
-}
-
-
-static int
-name_compare (const void *p1, const void *p2)
-{
-  const struct name *n1 = (const struct name *) p1;
-  const struct name *n2 = (const struct name *) p2;
-
-  return strcmp (n1->name, n2->name);
-}
-
-
-static struct name *
-new_name (const char *str, struct Strent *strent)
-{
-  struct name *newp = (struct name *) xmalloc (sizeof (struct name));
-
-  newp->name = str;
-  newp->strent = strent;
-  newp->module_idx = -1;
-  newp->hashval = hash_string (str);
-
-  ++nnames;
-
-  return newp;
-}
-
-
-static void
-generate_name_list (void)
-{
-  size_t i;
-
-  /* A name we always need.  */
-  tsearch (new_name ("INTERNAL", strtabadd (strtab, "INTERNAL",
-					    sizeof ("INTERNAL"))),
-	   &names, name_compare);
-
-  for (i = 0; i < nmodule_list; ++i)
-    {
-      struct module *runp;
-
-      if (strcmp (module_list[i]->fromname, "INTERNAL") != 0)
-	tsearch (new_name (module_list[i]->fromname,
-			   module_list[i]->fromname_strent),
-		 &names, name_compare);
-
-      for (runp = module_list[i]; runp != NULL; runp = runp->next)
-	if (strcmp (runp->toname, "INTERNAL") != 0)
-	  tsearch (new_name (runp->toname, runp->toname_strent),
-		   &names, name_compare);
-    }
-}
-
-
-static int
-name_to_module_idx (const char *name, int add)
-{
-  struct name **res;
-  struct name fake_name = { .name = name };
-  int idx;
-
-  res = (struct name **) tfind (&fake_name, &names, name_compare);
-  if (res == NULL)
-    abort ();
-
-  idx = (*res)->module_idx;
-  if (idx == -1 && add)
-    /* No module index assigned yet.  */
-    idx = (*res)->module_idx = nname_info++;
-
-  return idx;
-}
-
-
-static void
-generate_name_info (void)
-{
-  size_t i;
-  int idx;
-
-  name_info = (struct name_info *) xcalloc (nmodule_list + 1,
-					    sizeof (struct name_info));
-
-  /* First add a special entry for the INTERNAL name.  This must have
-     index zero.  */
-  idx = name_to_module_idx ("INTERNAL", 1);
-  name_info[0].canonical_name = "INTERNAL";
-  name_info[0].canonical_strent = strtabadd (strtab, "INTERNAL",
-					     sizeof ("INTERNAL"));
-  assert (nname_info == 1);
-
-  for (i = 0; i < nmodule_list; ++i)
-    {
-      struct module *runp;
-
-      for (runp = module_list[i]; runp != NULL; runp = runp->next)
-	if (strcmp (runp->fromname, "INTERNAL") == 0)
-	  {
-	    idx = name_to_module_idx (runp->toname, 1);
-	    name_info[idx].from_internal = runp;
-	    assert (name_info[idx].canonical_name == NULL
-		    || strcmp (name_info[idx].canonical_name,
-			       runp->toname) == 0);
-	    name_info[idx].canonical_name = runp->toname;
-	    name_info[idx].canonical_strent = runp->toname_strent;
-	  }
-	else if (strcmp (runp->toname, "INTERNAL") == 0)
-	  {
-	    idx = name_to_module_idx (runp->fromname, 1);
-	    name_info[idx].to_internal = runp;
-	    assert (name_info[idx].canonical_name == NULL
-		    || strcmp (name_info[idx].canonical_name,
-			       runp->fromname) == 0);
-	    name_info[idx].canonical_name = runp->fromname;
-	    name_info[idx].canonical_strent = runp->fromname_strent;
-	  }
-	else
-	  {
-	    /* This is a transformation not to or from the INTERNAL
-	       encoding.  */
-	    int from_idx = name_to_module_idx (runp->fromname, 1);
-	    int to_idx = name_to_module_idx (runp->toname, 1);
-	    struct other_conv_list *newp;
-
-	    newp = (struct other_conv_list *)
-	      xmalloc (sizeof (struct other_conv_list));
-	    newp->other_conv.module_idx = to_idx;
-	    newp->other_conv.module = runp;
-	    newp->other_conv.next = NULL; /* XXX Allow multiple module sequence */
-	    newp->dest_idx = to_idx;
-	    newp->next = name_info[from_idx].other_conv_list;
-	    name_info[from_idx].other_conv_list = newp;
-	    assert (name_info[from_idx].canonical_name == NULL
-		    || strcmp (name_info[from_idx].canonical_name,
-			       runp->fromname) == 0);
-	    name_info[from_idx].canonical_name = runp->fromname;
-	    name_info[from_idx].canonical_strent = runp->fromname_strent;
-
-	    ++nextra_modules;
-	  }
-    }
-
-  /* Now add the module index information for all the aliases.  */
-  for (i = 0; i < nalias_list; ++i)
-    {
-      struct name fake_name = { .name = alias_list[i]->toname };
-      struct name **tonamep;
-
-      tonamep = (struct name **) tfind (&fake_name, &names, name_compare);
-      if (tonamep != NULL)
-	{
-	  struct name *newp = new_name (alias_list[i]->fromname,
-					alias_list[i]->froment);
-	  newp->module_idx = (*tonamep)->module_idx;
-	  tsearch (newp, &names, name_compare);
-	}
-    }
-}
-
-
-static int
-is_prime (unsigned long int candidate)
-{
-  /* No even number and none less than 10 will be passed here.  */
-  unsigned long int divn = 3;
-  unsigned long int sq = divn * divn;
-
-  while (sq < candidate && candidate % divn != 0)
-    {
-      ++divn;
-      sq += 4 * divn;
-      ++divn;
-    }
-
-  return candidate % divn != 0;
-}
-
-
-static uint32_t
-next_prime (uint32_t seed)
-{
-  /* Make it definitely odd.  */
-  seed |= 1;
-
-  while (!is_prime (seed))
-    seed += 2;
-
-  return seed;
-}
-
-
-/* Format of the output file.
-
-   Offset   Length       Description
-   0000     4            Magic header bytes
-   0004     4            Offset of string table (stoff)
-   0008     4            Offset of name hashing table (hoff)
-   000C     4            Hashing table size (hsize)
-   0010     4            Offset of module table (moff)
-   0014     4            Offset of other conversion module table (ooff)
-
-   stoff    ???          String table
-
-   hoff     8*hsize      Array of tuples
-                            string table offset
-                            module index
-
-   moff     ???          Array of tuples
-                            canonical name offset
-                            from-internal module dir name offset
-                            from-internal module name off
-                            to-internal module dir name offset
-                            to-internal module name offset
-                            offset into other conversion table
-
-   ooff     ???          One or more of
-                            number of steps/modules
-                            one or more of tuple
-                              canonical name offset for output
-                              module dir name offset
-                              module name offset
-                         (following last entry with step count 0)
-*/
-static int
-write_output (void)
-{
-  int fd;
-  char *string_table;
-  size_t string_table_size;
-  struct gconvcache_header header;
-  struct hash_entry *hash_table;
-  size_t hash_size;
-  struct module_entry *module_table;
-  char *extra_table;
-  char *cur_extra_table;
-  size_t n;
-  int idx;
-  struct iovec iov[6];
-  static const gidx_t null_word;
-  size_t total;
-  char tmpfname[sizeof (GCONV_MODULES_CACHE) + strlen (".XXXXXX")];
-
-  /* Function to insert the names.  */
-  static void name_insert (const void *nodep, VISIT value, int level)
-    {
-      struct name *name;
-      unsigned int idx;
-      unsigned int hval2;
-
-      if (value != leaf && value != postorder)
-	return;
-
-      name = *(struct name **) nodep;
-      idx = name->hashval % hash_size;
-      hval2 = 1 + name->hashval % (hash_size - 2);
-
-      while (hash_table[idx].string_offset != 0)
-	if ((idx += hval2) >= hash_size)
-	  idx -= hash_size;
-
-      hash_table[idx].string_offset = strtaboffset (name->strent);
-
-      assert (name->module_idx != -1);
-      hash_table[idx].module_idx = name->module_idx;
-    }
-
-  /* Open the output file.  */
-  strcpy (stpcpy (tmpfname, GCONV_MODULES_CACHE), ".XXXXXX");
-  fd = mkstemp (tmpfname);
-  if (fd == -1)
-    return 1;
-
-  /* Create the string table.  */
-  string_table = strtabfinalize (strtab, &string_table_size);
-
-  /* Create the hashing table.  We know how many strings we have.
-     Creating a perfect hash table is not reasonable here.  Therefore
-     we use open hashing and a table size which is the next prime 40%
-     larger than the number of strings.  */
-  hash_size = next_prime (nnames * 1.4);
-  hash_table = (struct hash_entry *) xcalloc (hash_size,
-					      sizeof (struct hash_entry));
-  /* Fill the hash table.  */
-  twalk (names, name_insert);
-
-  /* Create the section for the module list.  */
-  module_table = (struct module_entry *) xcalloc (sizeof (struct module_entry),
-						  nname_info);
-
-  /* Allocate memory for the non-INTERNAL conversions.  The allocated
-     memory can be more than is actually needed.  */
-  extra_table = (char *) xcalloc (sizeof (struct extra_entry)
-				  + sizeof (gidx_t)
-				  + sizeof (struct extra_entry_module),
-				  nextra_modules);
-  cur_extra_table = extra_table;
-
-  /* Fill in the module information.  */
-  for (n = 0; n < nname_info; ++n)
-    {
-      module_table[n].canonname_offset =
-	strtaboffset (name_info[n].canonical_strent);
-
-      if (name_info[n].from_internal == NULL)
-	{
-	  module_table[n].fromdir_offset = 0;
-	  module_table[n].fromname_offset = 0;
-	}
-      else
-	{
-	  module_table[n].fromdir_offset =
-	    strtaboffset (name_info[n].from_internal->directory_strent);
-	  module_table[n].fromname_offset =
-	    strtaboffset (name_info[n].from_internal->filename_strent);
-	}
-
-      if (name_info[n].to_internal == NULL)
-	{
-	  module_table[n].todir_offset = 0;
-	  module_table[n].toname_offset = 0;
-	}
-      else
-	{
-	  module_table[n].todir_offset =
-	    strtaboffset (name_info[n].to_internal->directory_strent);
-	  module_table[n].toname_offset =
-	    strtaboffset (name_info[n].to_internal->filename_strent);
-	}
-
-      if (name_info[n].other_conv_list != NULL)
-	{
-	  struct other_conv_list *other = name_info[n].other_conv_list;
-
-	  /* Store the reference.  We add 1 to distinguish the entry
-	     at offset zero from the case where no extra modules are
-	     available.  The file reader has to account for the
-	     offset.  */
-	  module_table[n].extra_offset = 1 + cur_extra_table - extra_table;
-
-	  do
-	    {
-	      struct other_conv *runp;
-	      struct extra_entry *extra;
-
-	      /* Allocate new entry.  */
-	      extra = (struct extra_entry *) cur_extra_table;
-	      cur_extra_table += sizeof (struct extra_entry);
-	      extra->module_cnt = 0;
-
-	      runp = &other->other_conv;
-	      do
-		{
-		  cur_extra_table += sizeof (struct extra_entry_module);
-		  extra->module[extra->module_cnt].outname_offset =
-		    runp->next == NULL
-		    ? other->dest_idx : runp->next->module_idx;
-		  extra->module[extra->module_cnt].dir_offset =
-		    strtaboffset (runp->module->directory_strent);
-		  extra->module[extra->module_cnt].name_offset =
-		    strtaboffset (runp->module->filename_strent);
-		  ++extra->module_cnt;
-
-		  runp = runp->next;
-		}
-	      while (runp != NULL);
-
-	      other = other->next;
-	    }
-	  while (other != NULL);
-
-	  /* Final module_cnt is zero.  */
-	  *((gidx_t *) cur_extra_table) = 0;
-	  cur_extra_table += sizeof (gidx_t);
-	}
-    }
-
-  header.magic = GCONVCACHE_MAGIC;
-
-  iov[0].iov_base = &header;
-  iov[0].iov_len = sizeof (struct gconvcache_header);
-  total = iov[0].iov_len;
-
-  header.string_offset = total;
-  iov[1].iov_base = string_table;
-  iov[1].iov_len = string_table_size;
-  total += iov[1].iov_len;
-
-  idx = 2;
-  if ((string_table_size & (sizeof (gidx_t) - 1)) != 0)
-    {
-      iov[2].iov_base = (void *) &null_word;
-      iov[2].iov_len = (sizeof (gidx_t)
-			- (string_table_size & (sizeof (gidx_t) - 1)));
-      total += iov[2].iov_len;
-      ++idx;
-    }
-
-  header.hash_offset = total;
-  header.hash_size = hash_size;
-  iov[idx].iov_base = hash_table;
-  iov[idx].iov_len = hash_size * sizeof (struct hash_entry);
-  total += iov[idx].iov_len;
-  ++idx;
-
-  header.module_offset = total;
-  iov[idx].iov_base = module_table;
-  iov[idx].iov_len = nname_info * sizeof (struct module_entry);
-  total += iov[idx].iov_len;
-  ++idx;
-
-  assert (cur_extra_table - extra_table
-	  <= ((sizeof (struct extra_entry) + sizeof (gidx_t)
-	       + sizeof (struct extra_entry_module))
-	      * nextra_modules));
-  header.otherconv_offset = total;
-  iov[idx].iov_base = extra_table;
-  iov[idx].iov_len = cur_extra_table - extra_table;
-  total += iov[idx].iov_len;
-  ++idx;
-
-  if (TEMP_FAILURE_RETRY (writev (fd, iov, idx)) != total
-      /* The file was created with mode 0600.  Make it world-readable.  */
-      || fchmod (fd, 0644) != 0
-      /* Rename the file, possibly replacing an old one.  */
-      || rename (tmpfname, GCONV_MODULES_CACHE) != 0)
-    {
-      int save_errno = errno;
-      close (fd);
-      unlink (tmpfname);
-      error (EXIT_FAILURE, save_errno,
-	     gettext ("cannot generate output file"));
-    }
-
-  close (fd);
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/iconv/iconvconfig.h b/newlib/libc/sys/linux/iconv/iconvconfig.h
deleted file mode 100644
index c52ceaefe..000000000
--- a/newlib/libc/sys/linux/iconv/iconvconfig.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <stdint.h>
-
-
-typedef uint16_t gidx_t;
-
-
-struct gconvcache_header
-{
-  uint32_t magic;
-  gidx_t string_offset;
-  gidx_t hash_offset;
-  gidx_t hash_size;
-  gidx_t module_offset;
-  gidx_t otherconv_offset;
-};
-
-struct hash_entry
-{
-  gidx_t string_offset;
-  gidx_t module_idx;
-};
-
-struct module_entry
-{
-  gidx_t canonname_offset;
-  gidx_t fromdir_offset;
-  gidx_t fromname_offset;
-  gidx_t todir_offset;
-  gidx_t toname_offset;
-  gidx_t extra_offset;
-};
-
-struct extra_entry
-{
-  gidx_t module_cnt;
-  struct extra_entry_module
-  {
-    gidx_t outname_offset;
-    gidx_t dir_offset;
-    gidx_t name_offset;
-  } module[0];
-};
-
-
-#define GCONVCACHE_MAGIC	0x20010324
-
-
-#define GCONV_MODULES_CACHE	GCONV_DIR "/gconv-modules.cache"
diff --git a/newlib/libc/sys/linux/iconv/loadinfo.h b/newlib/libc/sys/linux/iconv/loadinfo.h
deleted file mode 100644
index 1de6cfd24..000000000
--- a/newlib/libc/sys/linux/iconv/loadinfo.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LOADINFO_H
-#define _LOADINFO_H	1
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-/* Tell the compiler when a conditional or integer expression is
-   almost always true or almost always false.  */
-#ifndef HAVE_BUILTIN_EXPECT
-# define __builtin_expect(expr, val) (expr)
-#endif
-
-/* Encoding of locale name parts.  */
-#define CEN_REVISION		1
-#define CEN_SPONSOR		2
-#define CEN_SPECIAL		4
-#define XPG_NORM_CODESET	8
-#define XPG_CODESET		16
-#define TERRITORY		32
-#define CEN_AUDIENCE		64
-#define XPG_MODIFIER		128
-
-#define CEN_SPECIFIC	(CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE)
-#define XPG_SPECIFIC	(XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER)
-
-
-struct loaded_l10nfile
-{
-  const char *filename;
-  int decided;
-
-  const void *data;
-
-  struct loaded_l10nfile *next;
-  struct loaded_l10nfile *successor[1];
-};
-
-
-/* Normalize codeset name.  There is no standard for the codeset
-   names.  Normalization allows the user to use any of the common
-   names.  The return value is dynamically allocated and has to be
-   freed by the caller.  */
-extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
-						  size_t name_len));
-
-extern struct loaded_l10nfile *
-_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
-			    const char *dirlist, size_t dirlist_len, int mask,
-			    const char *language, const char *territory,
-			    const char *codeset,
-			    const char *normalized_codeset,
-			    const char *modifier, const char *special,
-			    const char *sponsor, const char *revision,
-			    const char *filename, int do_allocate));
-
-
-extern const char *_nl_expand_alias PARAMS ((const char *name));
-
-/* normalized_codeset is dynamically allocated and has to be freed by
-   the caller.  */
-extern int _nl_explode_name PARAMS ((char *name, const char **language,
-				     const char **modifier,
-				     const char **territory,
-				     const char **codeset,
-				     const char **normalized_codeset,
-				     const char **special,
-				     const char **sponsor,
-				     const char **revision));
-
-extern char *_nl_find_language PARAMS ((const char *name));
-
-#endif	/* loadinfo.h */
diff --git a/newlib/libc/sys/linux/iconv/localeinfo.h b/newlib/libc/sys/linux/iconv/localeinfo.h
deleted file mode 100644
index 026463ffb..000000000
--- a/newlib/libc/sys/linux/iconv/localeinfo.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Declarations for internal libc locale interfaces
-   Copyright (C) 1995, 96, 97, 98, 99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LOCALEINFO_H
-#define _LOCALEINFO_H 1
-
-#include <stddef.h>
-#include <langinfo.h>
-#include <limits.h>
-#include <time.h>
-#include <stdint.h>
-#include <sys/types.h>
-
-/* This has to be changed whenever a new locale is defined.  */
-#define __LC_LAST	13
-
-#include "loadinfo.h"	/* For loaded_l10nfile definition.  */
-
-/* Magic number at the beginning of a locale data file for CATEGORY.  */
-#define	LIMAGIC(category)	((unsigned int) (0x20000828 ^ (category)))
-
-/* Two special weight constants for the collation data.  */
-#define IGNORE_CHAR	2
-
-/* We use a special value for the usage counter in `locale_data' to
-   signal that this data must never be removed anymore.  */
-#define MAX_USAGE_COUNT (UINT_MAX - 1)
-#define UNDELETABLE	UINT_MAX
-
-/* Structure describing locale data in core for a category.  */
-struct locale_data
-{
-  const char *name;
-  const char *filedata;		/* Region mapping the file data.  */
-  off_t filesize;		/* Size of the file (and the region).  */
-  int mmaped;			/* If nonzero the data is mmaped.  */
-
-  unsigned int usage_count;	/* Counter for users.  */
-
-  int use_translit;		/* Nonzero if the mb*towv*() and wc*tomb()
-				   functions should use transliteration.  */
-  const char *options;		/* Extra options from the locale name,
-				   not used in the path to the locale data.  */
-
-  unsigned int nstrings;	/* Number of strings below.  */
-  union locale_data_value
-  {
-    const uint32_t *wstr;
-    const char *string;
-    unsigned int word;
-  }
-  values __flexarr;	/* Items, usually pointers into `filedata'.  */
-};
-
-/* We know three kinds of collation sorting rules.  */
-enum coll_sort_rule
-{
-  illegal_0__,
-  sort_forward,
-  sort_backward,
-  illegal_3__,
-  sort_position,
-  sort_forward_position,
-  sort_backward_position,
-  sort_mask
-};
-
-/* We can map the types of the entries into a few categories.  */
-enum value_type
-{
-  none,
-  string,
-  stringarray,
-  byte,
-  bytearray,
-  word,
-  stringlist,
-  wordarray,
-  wstring,
-  wstringarray,
-  wstringlist
-};
-
-
-/* Definitions for `era' information from LC_TIME.  */
-#define ERA_NAME_FORMAT_MEMBERS 4
-#define ERA_M_NAME   0
-#define ERA_M_FORMAT 1
-#define ERA_W_NAME   2
-#define ERA_W_FORMAT 3
-
-
-/* Structure to access `era' information from LC_TIME.  */
-struct era_entry
-{
-  uint32_t direction;		/* Contains '+' or '-'.  */
-  int32_t offset;
-  int32_t start_date[3];
-  int32_t stop_date[3];
-  const char *era_name;
-  const char *era_format;
-  const wchar_t *era_wname;
-  const wchar_t *era_wformat;
-  int absolute_direction;
-  /* absolute direction:
-     +1 indicates that year number is higher in the future. (like A.D.)
-     -1 indicates that year number is higher in the past. (like B.C.)  */
-};
-
-
-/* LC_CTYPE specific:
-   Hardwired indices for standard wide character translation mappings.  */
-enum
-{
-  __TOW_toupper = 0,
-  __TOW_tolower = 1
-};
-
-
-/* LC_CTYPE specific:
-   Access a wide character class with a single character index.
-   _ISCTYPE (c, desc) = iswctype (btowc (c), desc).
-   c must be an `unsigned char'.  desc must be a nonzero wctype_t.  */
-#define _ISCTYPE(c, desc) \
-  (((((const uint32_t *) (desc)) - 8)[(c) >> 5] >> ((c) & 0x1f)) & 1)
-
-
-/* For each category declare the variable for the current locale data.  */
-#define DEFINE_CATEGORY(category, category_name, items, a) \
-extern struct locale_data *_nl_current_##category;
-#include "categories.def"
-#undef	DEFINE_CATEGORY
-
-extern const char *const _nl_category_names[__LC_LAST];
-extern const size_t _nl_category_name_sizes[__LC_LAST];
-extern struct locale_data * *const _nl_current[__LC_LAST];
-
-/* Extract the current CATEGORY locale's string for ITEM.  */
-#define _NL_CURRENT(category, item) \
-  (_nl_current_##category->values[_NL_ITEM_INDEX (item)].string)
-
-/* Extract the current CATEGORY locale's string for ITEM.  */
-#define _NL_CURRENT_WSTR(category, item) \
-  ((wchar_t *) (_nl_current_##category->values[_NL_ITEM_INDEX (item)].wstr))
-
-/* Extract the current CATEGORY locale's word for ITEM.  */
-#define _NL_CURRENT_WORD(category, item) \
-  (_nl_current_##category->values[_NL_ITEM_INDEX (item)].word)
-
-/* This is used in lc-CATEGORY.c to define _nl_current_CATEGORY.  */
-#define _NL_CURRENT_DEFINE(category) \
-  extern struct locale_data _nl_C_##category; \
-  struct locale_data *_nl_current_##category = &_nl_C_##category
-
-/* Load the locale data for CATEGORY from the file specified by *NAME.
-   If *NAME is "", use environment variables as specified by POSIX,
-   and fill in *NAME with the actual name used.  The directories
-   listed in LOCALE_PATH are searched for the locale files.  */
-extern struct locale_data *_nl_find_locale (const char *locale_path,
-					    size_t locale_path_len,
-					    int category, const char **name);
-
-/* Try to load the file described by FILE.  */
-extern void _nl_load_locale (struct loaded_l10nfile *file, int category);
-
-/* Free all resource.  */
-extern void _nl_unload_locale (struct locale_data *locale);
-
-/* Free the locale and give back all memory if the usage count is one.  */
-extern void _nl_remove_locale (int locale, struct locale_data *data);
-
-
-/* Return `era' entry which corresponds to TP.  Used in strftime.  */
-extern struct era_entry *_nl_get_era_entry (const struct tm *tp);
-
-/* Return `era' cnt'th entry .  Used in strptime.  */
-extern struct era_entry *_nl_select_era_entry (int cnt);
-
-/* Return `alt_digit' which corresponds to NUMBER.  Used in strftime.  */
-extern const char *_nl_get_alt_digit (unsigned int number);
-
-/* Similar, but now for wide characters.  */
-extern const wchar_t *_nl_get_walt_digit (unsigned int number);
-
-/* Parse string as alternative digit and return numeric value.  */
-extern int _nl_parse_alt_digit (const char **strp);
-
-/* Postload processing.  */
-extern void _nl_postload_ctype (void);
-extern void _nl_postload_time (void);
-
-
-#endif	/* localeinfo.h */
diff --git a/newlib/libc/sys/linux/iconv/loop.c b/newlib/libc/sys/linux/iconv/loop.c
deleted file mode 100644
index 7d3bf472d..000000000
--- a/newlib/libc/sys/linux/iconv/loop.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/* Conversion loop frame work.
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file provides a frame for the reader loop in all conversion modules.
-   The actual code must (of course) be provided in the actual module source
-   code but certain actions can be written down generically, with some
-   customization options which are these:
-
-     MIN_NEEDED_INPUT	minimal number of input bytes needed for the next
-			conversion.
-     MIN_NEEDED_OUTPUT	minimal number of bytes produced by the next round
-			of conversion.
-
-     MAX_NEEDED_INPUT	you guess it, this is the maximal number of input
-			bytes needed.  It defaults to MIN_NEEDED_INPUT
-     MAX_NEEDED_OUTPUT	likewise for output bytes.
-
-     LOOPFCT		name of the function created.  If not specified
-			the name is `loop' but this prevents the use
-			of multiple functions in the same file.
-
-     BODY		this is supposed to expand to the body of the loop.
-			The user must provide this.
-
-     EXTRA_LOOP_DECLS	extra arguments passed from converion loop call.
-
-     INIT_PARAMS	code to define and initialize variables from params.
-     UPDATE_PARAMS	code to store result in params.
-*/
-
-#include <assert.h>
-#include <machine/endian.h>
-#include <gconv.h>
-#include <stdint.h>
-#include <string.h>
-#include <wchar.h>
-#include <sys/param.h>		/* For MIN.  */
-#define __need_size_t
-#include <stddef.h>
-
-
-/* We have to provide support for machines which are not able to handled
-   unaligned memory accesses.  Some of the character encodings have
-   representations with a fixed width of 2 or 4 bytes.  But if we cannot
-   access unaligned memory we still have to read byte-wise.  */
-#undef FCTNAME2
-#if defined _STRING_ARCH_unaligned || !defined DEFINE_UNALIGNED
-/* We can handle unaligned memory access.  */
-# define get16(addr) *((__const uint16_t *) (addr))
-# define get32(addr) *((__const uint32_t *) (addr))
-
-/* We need no special support for writing values either.  */
-# define put16(addr, val) *((uint16_t *) (addr)) = (val)
-# define put32(addr, val) *((uint32_t *) (addr)) = (val)
-
-# define FCTNAME2(name) name
-#else
-/* Distinguish between big endian and little endian.  */
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-#  define get16(addr) \
-     (((__const unsigned char *) (addr))[1] << 8			      \
-      | ((__const unsigned char *) (addr))[0])
-#  define get32(addr) \
-     (((((__const unsigned char *) (addr))[3] << 8			      \
-	| ((__const unsigned char *) (addr))[2]) << 8			      \
-       | ((__const unsigned char *) (addr))[1]) << 8			      \
-      | ((__const unsigned char *) (addr))[0])
-
-#  define put16(addr, val) \
-     ({ uint16_t __val = (val);						      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	((unsigned char *) (addr))[1] = __val >> 8;			      \
-	(void) 0; })
-#  define put32(addr, val) \
-     ({ uint32_t __val = (val);						      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[2] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[3] = __val;				      \
-	(void) 0; })
-# else
-#  define get16(addr) \
-     (((__const unsigned char *) (addr))[0] << 8			      \
-      | ((__const unsigned char *) (addr))[1])
-#  define get32(addr) \
-     (((((__const unsigned char *) (addr))[0] << 8			      \
-	| ((__const unsigned char *) (addr))[1]) << 8			      \
-       | ((__const unsigned char *) (addr))[2]) << 8			      \
-      | ((__const unsigned char *) (addr))[3])
-
-#  define put16(addr, val) \
-     ({ uint16_t __val = (val);						      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	((unsigned char *) (addr))[0] = __val >> 8;			      \
-	(void) 0; })
-#  define put32(addr, val) \
-     ({ uint32_t __val = (val);						      \
-	((unsigned char *) (addr))[3] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[2] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	(void) 0; })
-# endif
-
-# define FCTNAME2(name) name##_unaligned
-#endif
-#define FCTNAME(name) FCTNAME2(name)
-
-
-/* We need at least one byte for the next round.  */
-#ifndef MIN_NEEDED_INPUT
-# error "MIN_NEEDED_INPUT definition missing"
-#endif
-
-/* Let's see how many bytes we produce.  */
-#ifndef MAX_NEEDED_INPUT
-# define MAX_NEEDED_INPUT	MIN_NEEDED_INPUT
-#endif
-
-/* We produce at least one byte in the next round.  */
-#ifndef MIN_NEEDED_OUTPUT
-# error "MIN_NEEDED_OUTPUT definition missing"
-#endif
-
-/* Let's see how many bytes we produce.  */
-#ifndef MAX_NEEDED_OUTPUT
-# define MAX_NEEDED_OUTPUT	MIN_NEEDED_OUTPUT
-#endif
-
-/* Default name for the function.  */
-#ifndef LOOPFCT
-# define LOOPFCT		loop
-#endif
-
-/* Make sure we have a loop body.  */
-#ifndef BODY
-# error "Definition of BODY missing for function" LOOPFCT
-#endif
-
-
-/* If no arguments have to passed to the loop function define the macro
-   as empty.  */
-#ifndef EXTRA_LOOP_DECLS
-# define EXTRA_LOOP_DECLS
-#endif
-
-
-/* To make it easier for the writers of the modules, we define a macro
-   to test whether we have to ignore errors.  */
-#define ignore_errors_p() \
-  (irreversible != NULL && (flags & __GCONV_IGNORE_ERRORS))
-
-
-/* Error handling with transliteration/transcription function use and
-   ignoring of errors.  Note that we cannot use the do while (0) trick
-   since `break' and `continue' must reach certain points.  */
-#define STANDARD_ERR_HANDLER(Incr) \
-  {									      \
-    struct __gconv_trans_data *trans;					      \
-									      \
-    result = __GCONV_ILLEGAL_INPUT;					      \
-									      \
-    if (irreversible == NULL)						      \
-      /* This means we are in call from __gconv_transliterate.  In this	      \
-	 case we are not doing any error recovery outself.  */		      \
-      break;								      \
-									      \
-    /* First try the transliteration methods.  */			      \
-    for (trans = step_data->__trans; trans != NULL; trans = trans->__next)    \
-      {									      \
-	result = trans->__trans_fct (step, step_data, trans->__data, *inptrp, \
-			       &inptr, inend, &outptr, irreversible);	      \
-	if (result != __GCONV_ILLEGAL_INPUT)				      \
-	  break;							      \
-      }									      \
-    /* If any of them recognized the input continue with the loop.  */	      \
-    if (result != __GCONV_ILLEGAL_INPUT)				      \
-      continue;								      \
-									      \
-    /* Next see whether we have to ignore the error.  If not, stop.  */	      \
-    if (! ignore_errors_p ())						      \
-      break;								      \
-									      \
-    /* When we come here it means we ignore the character.  */		      \
-    ++*irreversible;							      \
-    inptr += Incr;							      \
-    continue;								      \
-  }
-
-
-/* Handling of Unicode 3.1 TAG characters.  Unicode recommends
-   "If language codes are not relevant to the particular processing
-    operation, then they should be ignored."
-   This macro is usually called right before STANDARD_ERR_HANDLER (Incr).  */
-#define UNICODE_TAG_HANDLER(Character, Incr) \
-  {									      \
-    /* TAG characters are those in the range U+E0000..U+E007F.  */	      \
-    if (((Character) >> 7) == (0xe0000 >> 7))				      \
-      {									      \
-	inptr += Incr;							      \
-	continue;							      \
-      }									      \
-  }
-
-
-/* The function returns the status, as defined in gconv.h.  */
-static inline int
-FCTNAME (LOOPFCT) (struct __gconv_step *step,
-		   struct __gconv_step_data *step_data,
-		   const unsigned char **inptrp, const unsigned char *inend,
-		   unsigned char **outptrp, const unsigned char *outend,
-		   size_t *irreversible EXTRA_LOOP_DECLS)
-{
-#ifdef LOOP_NEED_STATE
-  mbstate_t *state = step_data->__statep;
-#endif
-#ifdef LOOP_NEED_FLAGS
-  int flags = step_data->__flags;
-#endif
-#ifdef LOOP_NEED_DATA
-  void *data = step->__data;
-#endif
-  int result = __GCONV_EMPTY_INPUT;
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-
-#ifdef INIT_PARAMS
-  INIT_PARAMS;
-#endif
-
-  while (inptr != inend)
-    {
-      /* `if' cases for MIN_NEEDED_OUTPUT ==/!= 1 is made to help the
-	 compiler generating better code.  They will be optimized away
-	 since MIN_NEEDED_OUTPUT is always a constant.  */
-      if ((MIN_NEEDED_OUTPUT != 1
-	   && __builtin_expect (outptr + MIN_NEEDED_OUTPUT > outend, 0))
-	  || (MIN_NEEDED_OUTPUT == 1
-	      && __builtin_expect (outptr >= outend, 0)))
-	{
-	  /* Overflow in the output buffer.  */
-	  result = __GCONV_FULL_OUTPUT;
-	  break;
-	}
-      if (MIN_NEEDED_INPUT > 1
-	  && __builtin_expect (inptr + MIN_NEEDED_INPUT > inend, 0))
-	{
-	  /* We don't have enough input for another complete input
-	     character.  */
-	  result = __GCONV_INCOMPLETE_INPUT;
-	  break;
-	}
-
-      /* Here comes the body the user provides.  It can stop with
-	 RESULT set to GCONV_INCOMPLETE_INPUT (if the size of the
-	 input characters vary in size), GCONV_ILLEGAL_INPUT, or
-	 GCONV_FULL_OUTPUT (if the output characters vary in size).  */
-      BODY
-    }
-
-  /* Update the pointers pointed to by the parameters.  */
-  *inptrp = inptr;
-  *outptrp = outptr;
-#ifdef UPDATE_PARAMS
-  UPDATE_PARAMS;
-#endif
-
-  return result;
-}
-
-
-/* Include the file a second time to define the function to handle
-   unaligned access.  */
-#if !defined DEFINE_UNALIGNED && !defined _STRING_ARCH_unaligned \
-    && MIN_NEEDED_FROM != 1 && MAX_NEEDED_FROM % MIN_NEEDED_FROM == 0 \
-    && MIN_NEEDED_TO != 1 && MAX_NEEDED_TO % MIN_NEEDED_TO == 0
-# undef get16
-# undef get32
-# undef put16
-# undef put32
-# undef unaligned
-
-# define DEFINE_UNALIGNED
-# include "loop.c"
-# undef DEFINE_UNALIGNED
-#endif
-
-
-#if MAX_NEEDED_INPUT > 1
-# define SINGLE(fct) SINGLE2 (fct)
-# define SINGLE2(fct) fct##_single
-static inline int
-SINGLE(LOOPFCT) (struct __gconv_step *step,
-		 struct __gconv_step_data *step_data,
-		 const unsigned char **inptrp, const unsigned char *inend,
-		 unsigned char **outptrp, unsigned char *outend,
-		 size_t *irreversible EXTRA_LOOP_DECLS)
-{
-  mbstate_t *state = step_data->__statep;
-#ifdef LOOP_NEED_FLAGS
-  int flags = step_data->__flags;
-#endif
-#ifdef LOOP_NEED_DATA
-  void *data = step->__data;
-#endif
-  int result = __GCONV_OK;
-  unsigned char bytebuf[MAX_NEEDED_INPUT];
-  const unsigned char *inptr = *inptrp;
-  unsigned char *outptr = *outptrp;
-  size_t inlen;
-
-#ifdef INIT_PARAMS
-  INIT_PARAMS;
-#endif
-
-#ifdef UNPACK_BYTES
-  UNPACK_BYTES
-#else
-  /* Add the bytes from the state to the input buffer.  */
-  for (inlen = 0; inlen < (size_t) (state->__count & 7); ++inlen)
-    bytebuf[inlen] = state->__value.__wchb[inlen];
-#endif
-
-  /* Are there enough bytes in the input buffer?  */
-  if (__builtin_expect (inptr + (MIN_NEEDED_INPUT - inlen) > inend, 0))
-    {
-      *inptrp = inend;
-#ifdef STORE_REST
-      inptr = bytebuf;
-      inptrp = &inptr;
-      inend = &bytebuf[inlen];
-
-      STORE_REST
-#else
-      /* We don't have enough input for another complete input
-	 character.  */
-      while (inptr < inend)
-	state->__value.__wchb[inlen++] = *inptr++;
-#endif
-
-      return __GCONV_INCOMPLETE_INPUT;
-    }
-
-  /* Enough space in output buffer.  */
-  if ((MIN_NEEDED_OUTPUT != 1 && outptr + MIN_NEEDED_OUTPUT > outend)
-      || (MIN_NEEDED_OUTPUT == 1 && outptr >= outend))
-    /* Overflow in the output buffer.  */
-    return __GCONV_FULL_OUTPUT;
-
-  /*  Now add characters from the normal input buffer.  */
-  do
-    bytebuf[inlen++] = *inptr++;
-  while (inlen < MAX_NEEDED_INPUT && inptr < inend);
-
-  inptr = bytebuf;
-  inend = &bytebuf[inlen];
-
-  do
-    {
-      BODY
-    }
-  while (0);
-
-  /* Now we either have produced an output character and consumed all the
-     bytes from the state and at least one more, or the character is still
-     incomplete, or we have some other error (like illegal input character,
-     no space in output buffer).  */
-  if (__builtin_expect (inptr != bytebuf, 1))
-    {
-      /* We found a new character.  */
-      assert (inptr - bytebuf > (state->__count & 7));
-
-      *inptrp += inptr - bytebuf - (state->__count & 7);
-      *outptrp = outptr;
-
-      result = __GCONV_OK;
-
-      /* Clear the state buffer.  */
-      state->__count &= ~7;
-    }
-  else if (result == __GCONV_INCOMPLETE_INPUT)
-    {
-      /* This can only happen if we have less than MAX_NEEDED_INPUT bytes
-	 available.  */
-      assert (inend != &bytebuf[MAX_NEEDED_INPUT]);
-
-      *inptrp += inend - bytebuf - (state->__count & 7);
-#ifdef STORE_REST
-      inptrp = &inptr;
-
-      STORE_REST
-#else
-      /* We don't have enough input for another complete input
-	 character.  */
-      while (inptr < inend)
-	state->__value.__wchb[inlen++] = *inptr++;
-#endif
-    }
-
-  return result;
-}
-# undef SINGLE
-# undef SINGLE2
-#endif
-
-
-/* We remove the macro definitions so that we can include this file again
-   for the definition of another function.  */
-#undef MIN_NEEDED_INPUT
-#undef MAX_NEEDED_INPUT
-#undef MIN_NEEDED_OUTPUT
-#undef MAX_NEEDED_OUTPUT
-#undef LOOPFCT
-#undef BODY
-#undef LOOPFCT
-#undef EXTRA_LOOP_DECLS
-#undef INIT_PARAMS
-#undef UPDATE_PARAMS
-#undef UNPACK_BYTES
-#undef LOOP_NEED_STATE
-#undef LOOP_NEED_FLAGS
-#undef LOOP_NEED_DATA
-#undef get16
-#undef get32
-#undef put16
-#undef put32
-#undef unaligned
diff --git a/newlib/libc/sys/linux/iconv/skeleton.c b/newlib/libc/sys/linux/iconv/skeleton.c
deleted file mode 100644
index cde8533c5..000000000
--- a/newlib/libc/sys/linux/iconv/skeleton.c
+++ /dev/null
@@ -1,696 +0,0 @@
-/* Skeleton for a conversion module.
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file can be included to provide definitions of several things
-   many modules have in common.  It can be customized using the following
-   macros:
-
-     DEFINE_INIT	define the default initializer.  This requires the
-			following symbol to be defined.
-
-     CHARSET_NAME	string with official name of the coded character
-			set (in all-caps)
-
-     DEFINE_FINI	define the default destructor function.
-
-     MIN_NEEDED_FROM	minimal number of bytes needed for the from-charset.
-     MIN_NEEDED_TO	likewise for the to-charset.
-
-     MAX_NEEDED_FROM	maximal number of bytes needed for the from-charset.
-			This macro is optional, it defaults to MIN_NEEDED_FROM.
-     MAX_NEEDED_TO	likewise for the to-charset.
-
-     DEFINE_DIRECTION_OBJECTS
-			two objects will be defined to be used when the
-			`gconv' function must only distinguish two
-			directions.  This is implied by DEFINE_INIT.
-			If this macro is not defined the following
-			macro must be available.
-
-     FROM_DIRECTION	this macro is supposed to return a value != 0
-			if we convert from the current character set,
-			otherwise it return 0.
-
-     EMIT_SHIFT_TO_INIT	this symbol is optional.  If it is defined it
-			defines some code which writes out a sequence
-			of characters which bring the current state into
-			the initial state.
-
-     FROM_LOOP		name of the function implementing the conversion
-			from the current characters.
-     TO_LOOP		likewise for the other direction
-
-     ONE_DIRECTION	optional.  If defined to 1, only one conversion
-			direction is defined instead of two.  In this
-			case, FROM_DIRECTION should be defined to 1, and
-			FROM_LOOP and TO_LOOP should have the same value.
-
-     SAVE_RESET_STATE	in case of an error we must reset the state for
-			the rerun so this macro must be defined for
-			stateful encodings.  It takes an argument which
-			is nonzero when saving.
-
-     RESET_INPUT_BUFFER	If the input character sets allow this the macro
-			can be defined to reset the input buffer pointers
-			to cover only those characters up to the error.
-
-     FUNCTION_NAME	if not set the conversion function is named `gconv'.
-
-     PREPARE_LOOP	optional code preparing the conversion loop.  Can
-			contain variable definitions.
-     END_LOOP		also optional, may be used to store information
-
-     EXTRA_LOOP_ARGS	optional macro specifying extra arguments passed
-			to loop function.
- */
-
-#include <assert.h>
-#include <gconv.h>
-#include <string.h>
-#define __need_size_t
-#define __need_NULL
-#include <stddef.h>
-
-#include <wchar.h>
-
-#ifndef STATIC_GCONV
-# include <dlfcn.h>
-#endif
-
-# define DL_CALL_FCT(fct, args) fct args
-
-/* The direction objects.  */
-#if DEFINE_DIRECTION_OBJECTS || DEFINE_INIT
-static int from_object;
-static int to_object;
-
-# ifndef FROM_DIRECTION
-#  define FROM_DIRECTION (step->__data == &from_object)
-# endif
-#else
-# ifndef FROM_DIRECTION
-#  error "FROM_DIRECTION must be provided if direction objects are not used"
-# endif
-#endif
-
-
-/* How many bytes are needed at most for the from-charset.  */
-#ifndef MAX_NEEDED_FROM
-# define MAX_NEEDED_FROM	MIN_NEEDED_FROM
-#endif
-
-/* Same for the to-charset.  */
-#ifndef MAX_NEEDED_TO
-# define MAX_NEEDED_TO		MIN_NEEDED_TO
-#endif
-
-
-/* Define macros which can access unaligned buffers.  These macros are
-   supposed to be used only in code outside the inner loops.  For the inner
-   loops we have other definitions which allow optimized access.  */
-#ifdef _STRING_ARCH_unaligned
-/* We can handle unaligned memory access.  */
-# define get16u(addr) *((__const uint16_t *) (addr))
-# define get32u(addr) *((__const uint32_t *) (addr))
-
-/* We need no special support for writing values either.  */
-# define put16u(addr, val) *((uint16_t *) (addr)) = (val)
-# define put32u(addr, val) *((uint32_t *) (addr)) = (val)
-#else
-/* Distinguish between big endian and little endian.  */
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-#  define get16u(addr) \
-     (((__const unsigned char *) (addr))[1] << 8			      \
-      | ((__const unsigned char *) (addr))[0])
-#  define get32u(addr) \
-     (((((__const unsigned char *) (addr))[3] << 8			      \
-	| ((__const unsigned char *) (addr))[2]) << 8			      \
-       | ((__const unsigned char *) (addr))[1]) << 8			      \
-      | ((__const unsigned char *) (addr))[0])
-
-#  define put16u(addr, val) \
-     ({ uint16_t __val = (val);						      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	((unsigned char *) (addr))[1] = __val >> 8;			      \
-	(void) 0; })
-#  define put32u(addr, val) \
-     ({ uint32_t __val = (val);						      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[2] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[3] = __val;				      \
-	(void) 0; })
-# else
-#  define get16u(addr) \
-     (((__const unsigned char *) (addr))[0] << 8			      \
-      | ((__const unsigned char *) (addr))[1])
-#  define get32u(addr) \
-     (((((__const unsigned char *) (addr))[0] << 8			      \
-	| ((__const unsigned char *) (addr))[1]) << 8			      \
-       | ((__const unsigned char *) (addr))[2]) << 8			      \
-      | ((__const unsigned char *) (addr))[3])
-
-#  define put16u(addr, val) \
-     ({ uint16_t __val = (val);						      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	((unsigned char *) (addr))[0] = __val >> 8;			      \
-	(void) 0; })
-#  define put32u(addr, val) \
-     ({ uint32_t __val = (val);						      \
-	((unsigned char *) (addr))[3] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[2] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[1] = __val;				      \
-	__val >>= 8;							      \
-	((unsigned char *) (addr))[0] = __val;				      \
-	(void) 0; })
-# endif
-#endif
-
-
-/* For conversions from a fixed width character set to another fixed width
-   character set we can define RESET_INPUT_BUFFER in a very fast way.  */
-#if !defined RESET_INPUT_BUFFER && !defined SAVE_RESET_STATE
-# if MIN_NEEDED_FROM == MAX_NEEDED_FROM && MIN_NEEDED_TO == MAX_NEEDED_TO
-/* We have to use these `if's here since the compiler cannot know that
-   (outbuf - outerr) is always divisible by MIN_NEEDED_TO.  */
-#  define RESET_INPUT_BUFFER \
-  if (MIN_NEEDED_FROM % MIN_NEEDED_TO == 0)				      \
-    *inptrp -= (outbuf - outerr) * (MIN_NEEDED_FROM / MIN_NEEDED_TO);	      \
-  else if (MIN_NEEDED_TO % MIN_NEEDED_FROM == 0)			      \
-    *inptrp -= (outbuf - outerr) / (MIN_NEEDED_TO / MIN_NEEDED_FROM);	      \
-  else									      \
-    *inptrp -= ((outbuf - outerr) / MIN_NEEDED_TO) * MIN_NEEDED_FROM
-# endif
-#endif
-
-
-/* The default init function.  It simply matches the name and initializes
-   the step data to point to one of the objects above.  */
-#if DEFINE_INIT
-# ifndef CHARSET_NAME
-#  error "CHARSET_NAME not defined"
-# endif
-
-extern int gconv_init (struct __gconv_step *step);
-int
-gconv_init (struct __gconv_step *step)
-{
-  /* Determine which direction.  */
-  if (strcmp (step->__from_name, CHARSET_NAME) == 0)
-    {
-      step->__data = &from_object;
-
-      step->__min_needed_from = MIN_NEEDED_FROM;
-      step->__max_needed_from = MAX_NEEDED_FROM;
-      step->__min_needed_to = MIN_NEEDED_TO;
-      step->__max_needed_to = MAX_NEEDED_TO;
-    }
-  else if (__builtin_expect (strcmp (step->__to_name, CHARSET_NAME), 0) == 0)
-    {
-      step->__data = &to_object;
-
-      step->__min_needed_from = MIN_NEEDED_TO;
-      step->__max_needed_from = MAX_NEEDED_TO;
-      step->__min_needed_to = MIN_NEEDED_FROM;
-      step->__max_needed_to = MAX_NEEDED_FROM;
-    }
-  else
-    return __GCONV_NOCONV;
-
-#ifdef SAVE_RESET_STATE
-  step->__stateful = 1;
-#else
-  step->__stateful = 0;
-#endif
-
-  return __GCONV_OK;
-}
-#endif
-
-
-/* The default destructor function does nothing in the moment and so
-   we don't define it at all.  But we still provide the macro just in
-   case we need it some day.  */
-#if DEFINE_FINI
-#endif
-
-
-/* If no arguments have to passed to the loop function define the macro
-   as empty.  */
-#ifndef EXTRA_LOOP_ARGS
-# define EXTRA_LOOP_ARGS
-#endif
-
-
-/* This is the actual conversion function.  */
-#ifndef FUNCTION_NAME
-# define FUNCTION_NAME	gconv
-#endif
-
-/* The macros are used to access the function to convert single characters.  */
-#define SINGLE(fct) SINGLE2 (fct)
-#define SINGLE2(fct) fct##_single
-
-
-extern int FUNCTION_NAME (struct __gconv_step *step,
-			  struct __gconv_step_data *data,
-			  const unsigned char **inptrp,
-			  const unsigned char *inend,
-			  unsigned char **outbufstart, size_t *irreversible,
-			  int do_flush, int consume_incomplete);
-int
-FUNCTION_NAME (struct __gconv_step *step, struct __gconv_step_data *data,
-	       const unsigned char **inptrp, const unsigned char *inend,
-	       unsigned char **outbufstart, size_t *irreversible, int do_flush,
-	       int consume_incomplete)
-{
-  struct __gconv_step *next_step = step + 1;
-  struct __gconv_step_data *next_data = data + 1;
-  __gconv_fct fct;
-  int status;
-
-  fct = (data->__flags & __GCONV_IS_LAST) ? NULL : next_step->__fct;
-
-  /* If the function is called with no input this means we have to reset
-     to the initial state.  The possibly partly converted input is
-     dropped.  */
-  if (__builtin_expect (do_flush, 0))
-    {
-      /* This should never happen during error handling.  */
-      assert (outbufstart == NULL);
-
-      status = __GCONV_OK;
-
-#ifdef EMIT_SHIFT_TO_INIT
-      if (do_flush == 1)
-	{
-	  /* We preserve the initial values of the pointer variables.  */
-	  unsigned char *outbuf = data->__outbuf;
-	  unsigned char *outstart = outbuf;
-	  unsigned char *outend = data->__outbufend;
-
-# ifdef PREPARE_LOOP
-	  PREPARE_LOOP
-# endif
-
-# ifdef SAVE_RESET_STATE
-	  SAVE_RESET_STATE (1);
-# endif
-
-	  /* Emit the escape sequence to reset the state.  */
-	  EMIT_SHIFT_TO_INIT;
-
-	  /* Call the steps down the chain if there are any but only if we
-	     successfully emitted the escape sequence.  This should only
-	     fail if the output buffer is full.  If the input is invalid
-	     it should be discarded since the user wants to start from a
-	     clean state.  */
-	  if (status == __GCONV_OK)
-	    {
-	      if (data->__flags & __GCONV_IS_LAST)
-		/* Store information about how many bytes are available.  */
-		data->__outbuf = outbuf;
-	      else
-		{
-		  /* Write out all output which was produced.  */
-		  if (outbuf > outstart)
-		    {
-		      const unsigned char *outerr = outstart;
-		      int result;
-
-		      result = DL_CALL_FCT (fct, (next_step, next_data,
-						  &outerr, outbuf, NULL,
-						  irreversible, 0,
-						  consume_incomplete));
-
-		      if (result != __GCONV_EMPTY_INPUT)
-			{
-			  if (__builtin_expect (outerr != outbuf, 0))
-			    {
-			      /* We have a problem.  Undo the conversion.  */
-			      outbuf = outstart;
-
-			      /* Restore the state.  */
-# ifdef SAVE_RESET_STATE
-			      SAVE_RESET_STATE (0);
-# endif
-			    }
-
-			  /* Change the status.  */
-			  status = result;
-			}
-		    }
-
-		  if (status == __GCONV_OK)
-		    /* Now flush the remaining steps.  */
-		    status = DL_CALL_FCT (fct, (next_step, next_data, NULL,
-						NULL, NULL, irreversible, 1,
-						consume_incomplete));
-		}
-	    }
-	}
-      else
-#endif
-	{
-	  /* Clear the state object.  There might be bytes in there from
-	     previous calls with CONSUME_INCOMPLETE == 1.  But don't emit
-	     escape sequences.  */
-	  memset (data->__statep, '\0', sizeof (*data->__statep));
-
-	  if (! (data->__flags & __GCONV_IS_LAST))
-	    /* Now flush the remaining steps.  */
-	    status = DL_CALL_FCT (fct, (next_step, next_data, NULL, NULL,
-					NULL, irreversible, do_flush,
-					consume_incomplete));
-	}
-    }
-  else
-    {
-      /* We preserve the initial values of the pointer variables.  */
-      const unsigned char *inptr = *inptrp;
-      unsigned char *outbuf = (__builtin_expect (outbufstart == NULL, 1)
-			       ? data->__outbuf : *outbufstart);
-      unsigned char *outend = data->__outbufend;
-      unsigned char *outstart;
-      /* This variable is used to count the number of characters we
-	 actually converted.  */
-      size_t lirreversible = 0;
-      size_t *lirreversiblep = irreversible ? &lirreversible : NULL;
-#if defined _STRING_ARCH_unaligned \
-    || MIN_NEEDED_FROM == 1 || MAX_NEEDED_FROM % MIN_NEEDED_FROM != 0 \
-    || MIN_NEEDED_TO == 1 || MAX_NEEDED_TO % MIN_NEEDED_TO != 0
-# define unaligned 0
-#else
-      int unaligned;
-# define GEN_unaligned(name) GEN_unaligned2 (name)
-# define GEN_unaligned2(name) name##_unaligned
-#endif
-
-#ifdef PREPARE_LOOP
-      PREPARE_LOOP
-#endif
-
-#if MAX_NEEDED_FROM > 1 || MAX_NEEDED_TO > 1
-      /* If the function is used to implement the mb*towc*() or wc*tomb*()
-	 functions we must test whether any bytes from the last call are
-	 stored in the `state' object.  */
-      if (((MAX_NEEDED_FROM > 1 && MAX_NEEDED_TO > 1)
-	   || (MAX_NEEDED_FROM > 1 && FROM_DIRECTION)
-	   || (MAX_NEEDED_TO > 1 && !FROM_DIRECTION))
-	  && consume_incomplete && (data->__statep->__count & 7) != 0)
-	{
-	  /* Yep, we have some bytes left over.  Process them now.
-             But this must not happen while we are called from an
-             error handler.  */
-	  assert (outbufstart == NULL);
-
-# if MAX_NEEDED_FROM > 1
-	  if (MAX_NEEDED_TO == 1 || FROM_DIRECTION)
-	    status = SINGLE(FROM_LOOP) (step, data, inptrp, inend, &outbuf,
-					outend, lirreversiblep
-					EXTRA_LOOP_ARGS);
-# endif
-# if MAX_NEEDED_FROM > 1 && MAX_NEEDED_TO > 1 && !ONE_DIRECTION
-	  else
-# endif
-# if MAX_NEEDED_TO > 1 && !ONE_DIRECTION
-	    status = SINGLE(TO_LOOP) (step, data, inptrp, inend, &outbuf,
-				      outend, lirreversiblep EXTRA_LOOP_ARGS);
-# endif
-
-	  if (__builtin_expect (status, __GCONV_OK) != __GCONV_OK)
-	    return status;
-	}
-#endif
-
-#if !defined _STRING_ARCH_unaligned \
-    && MIN_NEEDED_FROM != 1 && MAX_NEEDED_FROM % MIN_NEEDED_FROM == 0 \
-    && MIN_NEEDED_TO != 1 && MAX_NEEDED_TO % MIN_NEEDED_TO == 0
-      /* The following assumes that encodings, which have a variable length
-	 what might unalign a buffer even though it is a aligned in the
-	 beginning, either don't have the minimal number of bytes as a divisor
-	 of the maximum length or have a minimum length of 1.  This is true
-	 for all known and supported encodings.  */
-      unaligned = ((FROM_DIRECTION
-		    && ((uintptr_t) inptr % MIN_NEEDED_FROM != 0
-			|| ((data->__flags & __GCONV_IS_LAST)
-			    && (uintptr_t) outbuf % MIN_NEEDED_TO != 0)))
-		   || (!FROM_DIRECTION
-		       && (((data->__flags & __GCONV_IS_LAST)
-			    && (uintptr_t) outbuf % MIN_NEEDED_FROM != 0)
-			   || (uintptr_t) inptr % MIN_NEEDED_TO != 0)));
-#endif
-
-      while (1)
-	{
-	  struct __gconv_trans_data *trans;
-
-	  /* Remember the start value for this round.  */
-	  inptr = *inptrp;
-	  /* The outbuf buffer is empty.  */
-	  outstart = outbuf;
-
-#ifdef SAVE_RESET_STATE
-	  SAVE_RESET_STATE (1);
-#endif
-
-	  if (__builtin_expect (!unaligned, 1))
-	    {
-	      if (FROM_DIRECTION)
-		/* Run the conversion loop.  */
-		status = FROM_LOOP (step, data, inptrp, inend, &outbuf, outend,
-				    lirreversiblep EXTRA_LOOP_ARGS);
-	      else
-		/* Run the conversion loop.  */
-		status = TO_LOOP (step, data, inptrp, inend, &outbuf, outend,
-				  lirreversiblep EXTRA_LOOP_ARGS);
-	    }
-#if !defined _STRING_ARCH_unaligned \
-    && MIN_NEEDED_FROM != 1 && MAX_NEEDED_FROM % MIN_NEEDED_FROM == 0 \
-    && MIN_NEEDED_TO != 1 && MAX_NEEDED_TO % MIN_NEEDED_TO == 0
-	  else
-	    {
-	      if (FROM_DIRECTION)
-		/* Run the conversion loop.  */
-		status = GEN_unaligned (FROM_LOOP) (step, data, inptrp, inend,
-						    &outbuf, outend,
-						    lirreversiblep
-						    EXTRA_LOOP_ARGS);
-	      else
-		/* Run the conversion loop.  */
-		status = GEN_unaligned (TO_LOOP) (step, data, inptrp, inend,
-						  &outbuf, outend,
-						  lirreversiblep
-						  EXTRA_LOOP_ARGS);
-	    }
-#endif
-
-	  /* If we were called as part of an error handling module we
-	     don't do anything else here.  */
-	  if (__builtin_expect (outbufstart != NULL, 0))
-	    {
-	      *outbufstart = outbuf;
-	      return status;
-	    }
-
-	  /* Give the transliteration module the chance to store the
-	     original text and the result in case it needs a context.  */
-	  for (trans = data->__trans; trans != NULL; trans = trans->__next)
-	    if (trans->__trans_context_fct != NULL)
-	      DL_CALL_FCT (trans->__trans_context_fct,
-			   (trans->__data, inptr, *inptrp, outstart, outbuf));
-
-	  /* We finished one use of the loops.  */
-	  ++data->__invocation_counter;
-
-	  /* If this is the last step leave the loop, there is nothing
-             we can do.  */
-	  if (__builtin_expect (data->__flags & __GCONV_IS_LAST, 0))
-	    {
-	      /* Store information about how many bytes are available.  */
-	      data->__outbuf = outbuf;
-
-	      /* Remember how many non-identical characters we
-                 converted in a irreversible way.  */
-	      *irreversible += lirreversible;
-
-	      break;
-	    }
-
-	  /* Write out all output which was produced.  */
-	  if (__builtin_expect (outbuf > outstart, 1))
-	    {
-	      const unsigned char *outerr = data->__outbuf;
-	      int result;
-
-	      result = DL_CALL_FCT (fct, (next_step, next_data, &outerr,
-					  outbuf, NULL, irreversible, 0,
-					  consume_incomplete));
-
-	      if (result != __GCONV_EMPTY_INPUT)
-		{
-		  if (__builtin_expect (outerr != outbuf, 0))
-		    {
-#ifdef RESET_INPUT_BUFFER
-		      RESET_INPUT_BUFFER;
-#else
-		      /* We have a problem with the in on of the functions
-			 below.  Undo the conversion upto the error point.  */
-		      size_t nstatus;
-
-		      /* Reload the pointers.  */
-		      *inptrp = inptr;
-		      outbuf = outstart;
-
-		      /* Restore the state.  */
-# ifdef SAVE_RESET_STATE
-		      SAVE_RESET_STATE (0);
-# endif
-
-		      if (__builtin_expect (!unaligned, 1))
-			{
-			  if (FROM_DIRECTION)
-			    /* Run the conversion loop.  */
-			    nstatus = FROM_LOOP (step, data, inptrp, inend,
-						 &outbuf, outerr,
-						 lirreversiblep
-						 EXTRA_LOOP_ARGS);
-			  else
-			    /* Run the conversion loop.  */
-			    nstatus = TO_LOOP (step, data, inptrp, inend,
-					       &outbuf, outerr,
-					       lirreversiblep
-					       EXTRA_LOOP_ARGS);
-			}
-# if !defined _STRING_ARCH_unaligned \
-     && MIN_NEEDED_FROM != 1 && MAX_NEEDED_FROM % MIN_NEEDED_FROM == 0 \
-     && MIN_NEEDED_TO != 1 && MAX_NEEDED_TO % MIN_NEEDED_TO == 0
-		      else
-			{
-			  if (FROM_DIRECTION)
-			    /* Run the conversion loop.  */
-			    nstatus = GEN_unaligned (FROM_LOOP) (step, data,
-								 inptrp, inend,
-								 &outbuf,
-								 outerr,
-								 lirreversiblep
-								 EXTRA_LOOP_ARGS);
-			  else
-			    /* Run the conversion loop.  */
-			    nstatus = GEN_unaligned (TO_LOOP) (step, data,
-							       inptrp, inend,
-							       &outbuf, outerr,
-							       lirreversiblep
-							       EXTRA_LOOP_ARGS);
-			}
-# endif
-
-		      /* We must run out of output buffer space in this
-			 rerun.  */
-		      assert (outbuf == outerr);
-		      assert (nstatus == __GCONV_FULL_OUTPUT);
-
-		      /* If we haven't consumed a single byte decrement
-			 the invocation counter.  */
-		      if (__builtin_expect (outbuf == outstart, 0))
-			--data->__invocation_counter;
-#endif	/* reset input buffer */
-		    }
-
-		  /* Change the status.  */
-		  status = result;
-		}
-	      else
-		/* All the output is consumed, we can make another run
-		   if everything was ok.  */
-		if (status == __GCONV_FULL_OUTPUT)
-		  {
-		    status = __GCONV_OK;
-		    outbuf = data->__outbuf;
-		  }
-	    }
-
-	  if (status != __GCONV_OK)
-	    break;
-
-	  /* Reset the output buffer pointer for the next round.  */
-	  outbuf = data->__outbuf;
-	}
-
-#ifdef END_LOOP
-      END_LOOP
-#endif
-
-      /* If we are supposed to consume all character store now all of the
-	 remaining characters in the `state' object.  */
-#if MAX_NEEDED_FROM > 1 || MAX_NEEDED_TO > 1
-      if (((MAX_NEEDED_FROM > 1 && MAX_NEEDED_TO > 1)
-	   || (MAX_NEEDED_FROM > 1 && FROM_DIRECTION)
-	   || (MAX_NEEDED_TO > 1 && !FROM_DIRECTION))
-	  && __builtin_expect (consume_incomplete, 0)
-	  && status == __GCONV_INCOMPLETE_INPUT)
-	{
-# ifdef STORE_REST
-	  mbstate_t *state = data->__statep;
-
-	  STORE_REST
-# else
-	  size_t cnt;
-
-	  /* Make sure the remaining bytes fit into the state objects
-             buffer.  */
-	  assert (inend - *inptrp < 4);
-
-	  for (cnt = 0; *inptrp < inend; ++cnt)
-	    data->__statep->__value.__wchb[cnt] = *(*inptrp)++;
-	  data->__statep->__count &= ~7;
-	  data->__statep->__count |= cnt;
-# endif
-	}
-#endif
-    }
-
-  return status;
-}
-
-#undef DEFINE_INIT
-#undef CHARSET_NAME
-#undef DEFINE_FINI
-#undef MIN_NEEDED_FROM
-#undef MIN_NEEDED_TO
-#undef MAX_NEEDED_FROM
-#undef MAX_NEEDED_TO
-#undef DEFINE_DIRECTION_OBJECTS
-#undef FROM_DIRECTION
-#undef EMIT_SHIFT_TO_INIT
-#undef FROM_LOOP
-#undef TO_LOOP
-#undef SAVE_RESET_STATE
-#undef RESET_INPUT_BUFFER
-#undef FUNCTION_NAME
-#undef PREPARE_LOOP
-#undef END_LOOP
-#undef ONE_DIRECTION
-#undef STORE_REST
diff --git a/newlib/libc/sys/linux/iconv/strtab.c b/newlib/libc/sys/linux/iconv/strtab.c
deleted file mode 100644
index 0f5e2b632..000000000
--- a/newlib/libc/sys/linux/iconv/strtab.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/* C string table handling.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@redhat.com>, 2000.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <assert.h>
-#include <inttypes.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/cdefs.h>
-#include <sys/param.h>
-
-
-struct Strent
-{
-  const char *string;
-  size_t len;
-  struct Strent *next;
-  struct Strent *left;
-  struct Strent *right;
-  size_t offset;
-  char reverse[0];
-};
-
-
-struct memoryblock
-{
-  struct memoryblock *next;
-  char memory[0];
-};
-
-
-struct Strtab
-{
-  struct Strent *root;
-  struct memoryblock *memory;
-  char *backp;
-  size_t left;
-  size_t total;
-
-  struct Strent null;
-};
-
-
-/* Cache for the pagesize.  We correct this value a bit so that `malloc'
-   is not allocating more than a page.  */
-static size_t ps;
-
-
-extern void *xmalloc (size_t n) __attribute_malloc__;
-
-/* Prototypes for our functions that are used from iconvconfig.c.  If
-   you change these, change also iconvconfig.c.  */
-/* Create new C string table object in memory.  */
-extern struct Strtab *strtabinit (void);
-
-/* Free resources allocated for C string table ST.  */
-extern void strtabfree (struct Strtab *st);
-
-/* Add string STR (length LEN is != 0) to C string table ST.  */
-extern struct Strent *strtabadd (struct Strtab *st, const char *str,
-				 size_t len);
-
-/* Finalize string table ST and store size in *SIZE and return a pointer.  */
-extern void *strtabfinalize (struct Strtab *st, size_t *size);
-
-/* Get offset in string table for string associated with SE.  */
-extern size_t strtaboffset (struct Strent *se);
-
-
-struct Strtab *
-strtabinit (void)
-{
-  struct Strtab *ret;
-
-  if (ps == 0)
-    {
-      ps = sysconf (_SC_PAGESIZE) - 2 * sizeof (void *);
-      assert (sizeof (struct memoryblock) < ps);
-    }
-
-  ret = (struct Strtab *) calloc (1, sizeof (struct Strtab));
-  if (ret != NULL)
-    {
-      ret->null.len = 1;
-      ret->null.string = "";
-    }
-  return ret;
-}
-
-
-static void
-morememory (struct Strtab *st, size_t len)
-{
-  struct memoryblock *newmem;
-
-  if (len < ps)
-    len = ps;
-  newmem = (struct memoryblock *) malloc (len);
-  if (newmem == NULL)
-    abort ();
-
-  newmem->next = st->memory;
-  st->memory = newmem;
-  st->backp = newmem->memory;
-  st->left = len - offsetof (struct memoryblock, memory);
-}
-
-
-void
-strtabfree (struct Strtab *st)
-{
-  struct memoryblock *mb = st->memory;
-
-  while (mb != NULL)
-    {
-      void *old = mb;
-      mb = mb->next;
-      free (old);
-    }
-
-  free (st);
-}
-
-
-static struct Strent *
-newstring (struct Strtab *st, const char *str, size_t len)
-{
-  struct Strent *newstr;
-  size_t align;
-  int i;
-
-  /* Compute the amount of padding needed to make the structure aligned.  */
-  align = ((__alignof__ (struct Strent)
-	    - (((uintptr_t) st->backp)
-	       & (__alignof__ (struct Strent) - 1)))
-	   & (__alignof__ (struct Strent) - 1));
-
-  /* Make sure there is enough room in the memory block.  */
-  if (st->left < align + sizeof (struct Strent) + len)
-    {
-      morememory (st, sizeof (struct Strent) + len);
-      align = 0;
-    }
-
-  /* Create the reserved string.  */
-  newstr = (struct Strent *) (st->backp + align);
-  newstr->string = str;
-  newstr->len = len;
-  newstr->next = NULL;
-  newstr->left = NULL;
-  newstr->right = NULL;
-  newstr->offset = 0;
-  for (i = len - 2; i >= 0; --i)
-    newstr->reverse[i] = str[len - 2 - i];
-  newstr->reverse[len - 1] = '\0';
-  st->backp += align + sizeof (struct Strent) + len;
-  st->left -= align + sizeof (struct Strent) + len;
-
-  return newstr;
-}
-
-
-/* XXX This function should definitely be rewritten to use a balancing
-   tree algorith (AVL, red-black trees).  For now a simple, correct
-   implementation is enough.  */
-static struct Strent **
-searchstring (struct Strent **sep, struct Strent *newstr)
-{
-  int cmpres;
-
-  /* More strings?  */
-  if (*sep == NULL)
-    {
-      *sep = newstr;
-      return sep;
-    }
-
-  /* Compare the strings.  */
-  cmpres = memcmp ((*sep)->reverse, newstr->reverse,
-		   MIN ((*sep)->len, newstr->len) - 1);
-  if (cmpres == 0)
-    /* We found a matching string.  */
-    return sep;
-  else if (cmpres > 0)
-    return searchstring (&(*sep)->left, newstr);
-  else
-    return searchstring (&(*sep)->right, newstr);
-}
-
-
-/* Add new string.  The actual string is assumed to be permanent.  */
-struct Strent *
-strtabadd (struct Strtab *st, const char *str, size_t len)
-{
-  struct Strent *newstr;
-  struct Strent **sep;
-
-  /* Compute the string length if the caller doesn't know it.  */
-  if (len == 0)
-    len = strlen (str) + 1;
-
-  /* Make sure all "" strings get offset 0.  */
-  if (len == 1)
-    return &st->null;
-
-  /* Allocate memory for the new string and its associated information.  */
-  newstr = newstring (st, str, len);
-
-  /* Search in the array for the place to insert the string.  If there
-     is no string with matching prefix and no string with matching
-     leading substring, create a new entry.  */
-  sep = searchstring (&st->root, newstr);
-  if (*sep != newstr)
-    {
-      /* This is not the same entry.  This means we have a prefix match.  */
-      if ((*sep)->len > newstr->len)
-	{
-	  struct Strent *subs;
-
-	  for (subs = (*sep)->next; subs; subs = subs->next)
-	    if (subs->len == newstr->len)
-	      {
-		/* We have an exact match with a substring.  Free the memory
-		   we allocated.  */
-		st->left += st->backp - (char *) newstr;
-		st->backp = (char *) newstr;
-
-		return subs;
-	      }
-
-	  /* We have a new substring.  This means we don't need the reverse
-	     string of this entry anymore.  */
-	  st->backp -= newstr->len;
-	  st->left += newstr->len;
-
-	  newstr->next = (*sep)->next;
-	  (*sep)->next = newstr;
-	}
-      else if ((*sep)->len != newstr->len)
-	{
-	  /* When we get here it means that the string we are about to
-	     add has a common prefix with a string we already have but
-	     it is longer.  In this case we have to put it first.  */
-	  st->total += newstr->len - (*sep)->len;
-	  newstr->next = *sep;
-	  newstr->left = (*sep)->left;
-	  newstr->right = (*sep)->right;
-	  *sep = newstr;
-	}
-      else
-	{
-	  /* We have an exact match.  Free the memory we allocated.  */
-	  st->left += st->backp - (char *) newstr;
-	  st->backp = (char *) newstr;
-
-	  newstr = *sep;
-	}
-    }
-  else
-    st->total += newstr->len;
-
-  return newstr;
-}
-
-
-static void
-copystrings (struct Strent *nodep, char **freep, size_t *offsetp)
-{
-  struct Strent *subs;
-
-  if (nodep->left != NULL)
-    copystrings (nodep->left, freep, offsetp);
-
-  /* Process the current node.  */
-  nodep->offset = *offsetp;
-  *freep = (char *) memcpy (*freep, nodep->string, nodep->len);
-  *freep += nodep->len;
-  *offsetp += nodep->len;
-
-  for (subs = nodep->next; subs != NULL; subs = subs->next)
-    {
-      assert (subs->len < nodep->len);
-      subs->offset = nodep->offset + nodep->len - subs->len;
-    }
-
-  if (nodep->right != NULL)
-    copystrings (nodep->right, freep, offsetp);
-}
-
-
-void *
-strtabfinalize (struct Strtab *st, size_t *size)
-{
-  size_t copylen;
-  char *endp;
-  char *retval;
-
-  /* Fill in the information.  */
-  endp = retval = (char *) xmalloc (st->total + 1);
-
-  /* Always put an empty string at the beginning so that a zero offset
-     can mean error.  */
-  *endp++ = '\0';
-
-  /* Now run through the tree and add all the string while also updating
-     the offset members of the elfstrent records.  */
-  copylen = 1;
-  copystrings (st->root, &endp, &copylen);
-  assert (copylen == st->total + 1);
-  assert (endp = retval + st->total + 1);
-  *size = copylen;
-
-  return retval;
-}
-
-
-size_t
-strtaboffset (struct Strent *se)
-{
-  return se->offset;
-}
diff --git a/newlib/libc/sys/linux/ids.c b/newlib/libc/sys/linux/ids.c
deleted file mode 100644
index f3a95b123..000000000
--- a/newlib/libc/sys/linux/ids.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* libc/sys/linux/ids.c - System calls related to user and group ids  */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <sys/types.h>
-#include <sys/unistd.h>
-#include <machine/syscall.h>
-
-
-_syscall1(int,setfsuid,uid_t,uid)
-_syscall0(uid_t,getuid)
-_syscall1(int,setfsgid,gid_t,gid)
-_syscall0(gid_t,getgid)
-_syscall0(uid_t,geteuid)
-_syscall0(gid_t,getegid)
-_syscall3(int,setresuid,uid_t,ruid,uid_t,euid,uid_t,suid)
-_syscall3(int,syslog,int,type,char *,bufp,int,len)
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL > 3
-_syscall2(int,getgroups,int,size,gid_t *,list)
-_syscall1(int,setgid,gid_t,gid)
-_syscall1(int,setuid,uid_t,uid)
-#endif
-
-weak_alias(__libc_getuid,__getuid);
diff --git a/newlib/libc/sys/linux/include/argp.h b/newlib/libc/sys/linux/include/argp.h
deleted file mode 100644
index e58258a3c..000000000
--- a/newlib/libc/sys/linux/include/argp.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/* Hierarchial argument parsing, layered over getopt.
-   Copyright (C) 1995, 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Miles Bader <miles@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _ARGP_H
-#define _ARGP_H
-
-#include <stdio.h>
-#include <ctype.h>
-#include <getopt.h>
-
-#define __need_error_t
-#include <errno.h>
-
-char *program_invocation_name;
-char *program_invocation_short_name;
-
-#ifndef __const
-# define __const const
-#endif
-
-#ifndef __error_t_defined
-typedef int error_t;
-# define __error_t_defined
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* A description of a particular option.  A pointer to an array of
-   these is passed in the OPTIONS field of an argp structure.  Each option
-   entry can correspond to one long option and/or one short option; more
-   names for the same option can be added by following an entry in an option
-   array with options having the OPTION_ALIAS flag set.  */
-struct argp_option
-{
-  /* The long option name.  For more than one name for the same option, you
-     can use following options with the OPTION_ALIAS flag set.  */
-  __const char *name;
-
-  /* What key is returned for this option.  If > 0 and printable, then it's
-     also accepted as a short option.  */
-  int key;
-
-  /* If non-NULL, this is the name of the argument associated with this
-     option, which is required unless the OPTION_ARG_OPTIONAL flag is set. */
-  __const char *arg;
-
-  /* OPTION_ flags.  */
-  int flags;
-
-  /* The doc string for this option.  If both NAME and KEY are 0, This string
-     will be printed outdented from the normal option column, making it
-     useful as a group header (it will be the first thing printed in its
-     group); in this usage, it's conventional to end the string with a `:'.  */
-  __const char *doc;
-
-  /* The group this option is in.  In a long help message, options are sorted
-     alphabetically within each group, and the groups presented in the order
-     0, 1, 2, ..., n, -m, ..., -2, -1.  Every entry in an options array with
-     if this field 0 will inherit the group number of the previous entry, or
-     zero if it's the first one, unless its a group header (NAME and KEY both
-     0), in which case, the previous entry + 1 is the default.  Automagic
-     options such as --help are put into group -1.  */
-  int group;
-};
-
-/* The argument associated with this option is optional.  */
-#define OPTION_ARG_OPTIONAL	0x1
-
-/* This option isn't displayed in any help messages.  */
-#define OPTION_HIDDEN	       	0x2
-
-/* This option is an alias for the closest previous non-alias option.  This
-   means that it will be displayed in the same help entry, and will inherit
-   fields other than NAME and KEY from the aliased option.  */
-#define OPTION_ALIAS		0x4
-
-/* This option isn't actually an option (and so should be ignored by the
-   actual option parser), but rather an arbitrary piece of documentation that
-   should be displayed in much the same manner as the options.  If this flag
-   is set, then the option NAME field is displayed unmodified (e.g., no `--'
-   prefix is added) at the left-margin (where a *short* option would normally
-   be displayed), and the documentation string in the normal place.  For
-   purposes of sorting, any leading whitespace and puncuation is ignored,
-   except that if the first non-whitespace character is not `-', this entry
-   is displayed after all options (and OPTION_DOC entries with a leading `-')
-   in the same group.  */
-#define OPTION_DOC		0x8
-
-/* This option shouldn't be included in `long' usage messages (but is still
-   included in help messages).  This is mainly intended for options that are
-   completely documented in an argp's ARGS_DOC field, in which case including
-   the option in the generic usage list would be redundant.  For instance,
-   if ARGS_DOC is "FOO BAR\n-x BLAH", and the `-x' option's purpose is to
-   distinguish these two cases, -x should probably be marked
-   OPTION_NO_USAGE.  */
-#define OPTION_NO_USAGE		0x10
-
-struct argp;			/* fwd declare this type */
-struct argp_state;		/* " */
-struct argp_child;		/* " */
-
-/* The type of a pointer to an argp parsing function.  */
-typedef error_t (*argp_parser_t) (int key, char *arg,
-				  struct argp_state *state);
-
-/* What to return for unrecognized keys.  For special ARGP_KEY_ keys, such
-   returns will simply be ignored.  For user keys, this error will be turned
-   into EINVAL (if the call to argp_parse is such that errors are propagated
-   back to the user instead of exiting); returning EINVAL itself would result
-   in an immediate stop to parsing in *all* cases.  */
-#define ARGP_ERR_UNKNOWN	E2BIG /* Hurd should never need E2BIG.  XXX */
-
-/* Special values for the KEY argument to an argument parsing function.
-   ARGP_ERR_UNKNOWN should be returned if they aren't understood.
-
-   The sequence of keys to a parsing function is either (where each
-   uppercased word should be prefixed by `ARGP_KEY_' and opt is a user key):
-
-       INIT opt... NO_ARGS END SUCCESS  -- No non-option arguments at all
-   or  INIT (opt | ARG)... END SUCCESS  -- All non-option args parsed
-   or  INIT (opt | ARG)... SUCCESS      -- Some non-option arg unrecognized
-
-   The third case is where every parser returned ARGP_KEY_UNKNOWN for an
-   argument, in which case parsing stops at that argument (returning the
-   unparsed arguments to the caller of argp_parse if requested, or stopping
-   with an error message if not).
-
-   If an error occurs (either detected by argp, or because the parsing
-   function returned an error value), then the parser is called with
-   ARGP_KEY_ERROR, and no further calls are made.  */
-
-/* This is not an option at all, but rather a command line argument.  If a
-   parser receiving this key returns success, the fact is recorded, and the
-   ARGP_KEY_NO_ARGS case won't be used.  HOWEVER, if while processing the
-   argument, a parser function decrements the NEXT field of the state it's
-   passed, the option won't be considered processed; this is to allow you to
-   actually modify the argument (perhaps into an option), and have it
-   processed again.  */
-#define ARGP_KEY_ARG		0
-/* There are remaining arguments not parsed by any parser, which may be found
-   starting at (STATE->argv + STATE->next).  If success is returned, but
-   STATE->next left untouched, it's assumed that all arguments were consume,
-   otherwise, the parser should adjust STATE->next to reflect any arguments
-   consumed.  */
-#define ARGP_KEY_ARGS		0x1000006
-/* There are no more command line arguments at all.  */
-#define ARGP_KEY_END		0x1000001
-/* Because it's common to want to do some special processing if there aren't
-   any non-option args, user parsers are called with this key if they didn't
-   successfully process any non-option arguments.  Called just before
-   ARGP_KEY_END (where more general validity checks on previously parsed
-   arguments can take place).  */
-#define ARGP_KEY_NO_ARGS	0x1000002
-/* Passed in before any parsing is done.  Afterwards, the values of each
-   element of the CHILD_INPUT field, if any, in the state structure is
-   copied to each child's state to be the initial value of the INPUT field.  */
-#define ARGP_KEY_INIT		0x1000003
-/* Use after all other keys, including SUCCESS & END.  */
-#define ARGP_KEY_FINI		0x1000007
-/* Passed in when parsing has successfully been completed (even if there are
-   still arguments remaining).  */
-#define ARGP_KEY_SUCCESS	0x1000004
-/* Passed in if an error occurs.  */
-#define ARGP_KEY_ERROR		0x1000005
-
-/* An argp structure contains a set of options declarations, a function to
-   deal with parsing one, documentation string, a possible vector of child
-   argp's, and perhaps a function to filter help output.  When actually
-   parsing options, getopt is called with the union of all the argp
-   structures chained together through their CHILD pointers, with conflicts
-   being resolved in favor of the first occurrence in the chain.  */
-struct argp
-{
-  /* An array of argp_option structures, terminated by an entry with both
-     NAME and KEY having a value of 0.  */
-  __const struct argp_option *options;
-
-  /* What to do with an option from this structure.  KEY is the key
-     associated with the option, and ARG is any associated argument (NULL if
-     none was supplied).  If KEY isn't understood, ARGP_ERR_UNKNOWN should be
-     returned.  If a non-zero, non-ARGP_ERR_UNKNOWN value is returned, then
-     parsing is stopped immediately, and that value is returned from
-     argp_parse().  For special (non-user-supplied) values of KEY, see the
-     ARGP_KEY_ definitions below.  */
-  argp_parser_t parser;
-
-  /* A string describing what other arguments are wanted by this program.  It
-     is only used by argp_usage to print the `Usage:' message.  If it
-     contains newlines, the strings separated by them are considered
-     alternative usage patterns, and printed on separate lines (lines after
-     the first are prefix by `  or: ' instead of `Usage:').  */
-  __const char *args_doc;
-
-  /* If non-NULL, a string containing extra text to be printed before and
-     after the options in a long help message (separated by a vertical tab
-     `\v' character).  */
-  __const char *doc;
-
-  /* A vector of argp_children structures, terminated by a member with a 0
-     argp field, pointing to child argps should be parsed with this one.  Any
-     conflicts are resolved in favor of this argp, or early argps in the
-     CHILDREN list.  This field is useful if you use libraries that supply
-     their own argp structure, which you want to use in conjunction with your
-     own.  */
-  __const struct argp_child *children;
-
-  /* If non-zero, this should be a function to filter the output of help
-     messages.  KEY is either a key from an option, in which case TEXT is
-     that option's help text, or a special key from the ARGP_KEY_HELP_
-     defines, below, describing which other help text TEXT is.  The function
-     should return either TEXT, if it should be used as-is, a replacement
-     string, which should be malloced, and will be freed by argp, or NULL,
-     meaning `print nothing'.  The value for TEXT is *after* any translation
-     has been done, so if any of the replacement text also needs translation,
-     that should be done by the filter function.  INPUT is either the input
-     supplied to argp_parse, or NULL, if argp_help was called directly.  */
-  char *(*help_filter) (int __key, __const char *__text, void *__input);
-
-  /* If non-zero the strings used in the argp library are translated using
-     the domain described by this string.  Otherwise the currently installed
-     default domain is used.  */
-  const char *argp_domain;
-};
-
-/* Possible KEY arguments to a help filter function.  */
-#define ARGP_KEY_HELP_PRE_DOC	0x2000001 /* Help text preceeding options. */
-#define ARGP_KEY_HELP_POST_DOC	0x2000002 /* Help text following options. */
-#define ARGP_KEY_HELP_HEADER	0x2000003 /* Option header string. */
-#define ARGP_KEY_HELP_EXTRA	0x2000004 /* After all other documentation;
-					     TEXT is NULL for this key.  */
-/* Explanatory note emitted when duplicate option arguments have been
-   suppressed.  */
-#define ARGP_KEY_HELP_DUP_ARGS_NOTE 0x2000005
-#define ARGP_KEY_HELP_ARGS_DOC	0x2000006 /* Argument doc string.  */
-
-/* When an argp has a non-zero CHILDREN field, it should point to a vector of
-   argp_child structures, each of which describes a subsidiary argp.  */
-struct argp_child
-{
-  /* The child parser.  */
-  __const struct argp *argp;
-
-  /* Flags for this child.  */
-  int flags;
-
-  /* If non-zero, an optional header to be printed in help output before the
-     child options.  As a side-effect, a non-zero value forces the child
-     options to be grouped together; to achieve this effect without actually
-     printing a header string, use a value of "".  */
-  __const char *header;
-
-  /* Where to group the child options relative to the other (`consolidated')
-     options in the parent argp; the values are the same as the GROUP field
-     in argp_option structs, but all child-groupings follow parent options at
-     a particular group level.  If both this field and HEADER are zero, then
-     they aren't grouped at all, but rather merged with the parent options
-     (merging the child's grouping levels with the parents).  */
-  int group;
-};
-
-/* Parsing state.  This is provided to parsing functions called by argp,
-   which may examine and, as noted, modify fields.  */
-struct argp_state
-{
-  /* The top level ARGP being parsed.  */
-  __const struct argp *root_argp;
-
-  /* The argument vector being parsed.  May be modified.  */
-  int argc;
-  char **argv;
-
-  /* The index in ARGV of the next arg that to be parsed.  May be modified. */
-  int next;
-
-  /* The flags supplied to argp_parse.  May be modified.  */
-  unsigned flags;
-
-  /* While calling a parsing function with a key of ARGP_KEY_ARG, this is the
-     number of the current arg, starting at zero, and incremented after each
-     such call returns.  At all other times, this is the number of such
-     arguments that have been processed.  */
-  unsigned arg_num;
-
-  /* If non-zero, the index in ARGV of the first argument following a special
-     `--' argument (which prevents anything following being interpreted as an
-     option).  Only set once argument parsing has proceeded past this point. */
-  int quoted;
-
-  /* An arbitrary pointer passed in from the user.  */
-  void *input;
-  /* Values to pass to child parsers.  This vector will be the same length as
-     the number of children for the current parser.  */
-  void **child_inputs;
-
-  /* For the parser's use.  Initialized to 0.  */
-  void *hook;
-
-  /* The name used when printing messages.  This is initialized to ARGV[0],
-     or PROGRAM_INVOCATION_NAME if that is unavailable.  */
-  char *name;
-
-  /* Streams used when argp prints something.  */
-  FILE *err_stream;		/* For errors; initialized to stderr. */
-  FILE *out_stream;		/* For information; initialized to stdout. */
-
-  void *pstate;			/* Private, for use by argp.  */
-};
-
-/* Flags for argp_parse (note that the defaults are those that are
-   convenient for program command line parsing): */
-
-/* Don't ignore the first element of ARGV.  Normally (and always unless
-   ARGP_NO_ERRS is set) the first element of the argument vector is
-   skipped for option parsing purposes, as it corresponds to the program name
-   in a command line.  */
-#define ARGP_PARSE_ARGV0  0x01
-
-/* Don't print error messages for unknown options to stderr; unless this flag
-   is set, ARGP_PARSE_ARGV0 is ignored, as ARGV[0] is used as the program
-   name in the error messages.  This flag implies ARGP_NO_EXIT (on the
-   assumption that silent exiting upon errors is bad behaviour).  */
-#define ARGP_NO_ERRS	0x02
-
-/* Don't parse any non-option args.  Normally non-option args are parsed by
-   calling the parse functions with a key of ARGP_KEY_ARG, and the actual arg
-   as the value.  Since it's impossible to know which parse function wants to
-   handle it, each one is called in turn, until one returns 0 or an error
-   other than ARGP_ERR_UNKNOWN; if an argument is handled by no one, the
-   argp_parse returns prematurely (but with a return value of 0).  If all
-   args have been parsed without error, all parsing functions are called one
-   last time with a key of ARGP_KEY_END.  This flag needn't normally be set,
-   as the normal behavior is to stop parsing as soon as some argument can't
-   be handled.  */
-#define ARGP_NO_ARGS	0x04
-
-/* Parse options and arguments in the same order they occur on the command
-   line -- normally they're rearranged so that all options come first. */
-#define ARGP_IN_ORDER	0x08
-
-/* Don't provide the standard long option --help, which causes usage and
-      option help information to be output to stdout, and exit (0) called. */
-#define ARGP_NO_HELP	0x10
-
-/* Don't exit on errors (they may still result in error messages).  */
-#define ARGP_NO_EXIT	0x20
-
-/* Use the gnu getopt `long-only' rules for parsing arguments.  */
-#define ARGP_LONG_ONLY	0x40
-
-/* Turns off any message-printing/exiting options.  */
-#define ARGP_SILENT    (ARGP_NO_EXIT | ARGP_NO_ERRS | ARGP_NO_HELP)
-
-/* Parse the options strings in ARGC & ARGV according to the options in ARGP.
-   FLAGS is one of the ARGP_ flags above.  If ARG_INDEX is non-NULL, the
-   index in ARGV of the first unparsed option is returned in it.  If an
-   unknown option is present, ARGP_ERR_UNKNOWN is returned; if some parser
-   routine returned a non-zero value, it is returned; otherwise 0 is
-   returned.  This function may also call exit unless the ARGP_NO_HELP flag
-   is set.  INPUT is a pointer to a value to be passed in to the parser.  */
-extern error_t argp_parse (__const struct argp *__restrict __argp,
-			   int __argc, char **__restrict __argv,
-			   unsigned __flags, int *__restrict __arg_index,
-			   void *__restrict __input) __THROW;
-extern error_t __argp_parse (__const struct argp *__restrict __argp,
-			     int __argc, char **__restrict __argv,
-			     unsigned __flags, int *__restrict __arg_index,
-			     void *__restrict __input) __THROW;
-
-/* Global variables.  */
-
-/* If defined or set by the user program to a non-zero value, then a default
-   option --version is added (unless the ARGP_NO_HELP flag is used), which
-   will print this string followed by a newline and exit (unless the
-   ARGP_NO_EXIT flag is used).  Overridden by ARGP_PROGRAM_VERSION_HOOK.  */
-extern __const char *argp_program_version;
-
-/* If defined or set by the user program to a non-zero value, then a default
-   option --version is added (unless the ARGP_NO_HELP flag is used), which
-   calls this function with a stream to print the version to and a pointer to
-   the current parsing state, and then exits (unless the ARGP_NO_EXIT flag is
-   used).  This variable takes precedent over ARGP_PROGRAM_VERSION.  */
-extern void (*argp_program_version_hook) (FILE *__restrict __stream,
-					  struct argp_state *__restrict
-					  __state);
-
-/* If defined or set by the user program, it should point to string that is
-   the bug-reporting address for the program.  It will be printed by
-   argp_help if the ARGP_HELP_BUG_ADDR flag is set (as it is by various
-   standard help messages), embedded in a sentence that says something like
-   `Report bugs to ADDR.'.  */
-extern __const char *argp_program_bug_address;
-
-/* The exit status that argp will use when exiting due to a parsing error.
-   If not defined or set by the user program, this defaults to EX_USAGE from
-   <sysexits.h>.  */
-extern error_t argp_err_exit_status;
-
-/* Flags for argp_help.  */
-#define ARGP_HELP_USAGE		0x01 /* a Usage: message. */
-#define ARGP_HELP_SHORT_USAGE	0x02 /*  " but don't actually print options. */
-#define ARGP_HELP_SEE		0x04 /* a `Try ... for more help' message. */
-#define ARGP_HELP_LONG		0x08 /* a long help message. */
-#define ARGP_HELP_PRE_DOC	0x10 /* doc string preceding long help.  */
-#define ARGP_HELP_POST_DOC	0x20 /* doc string following long help.  */
-#define ARGP_HELP_DOC		(ARGP_HELP_PRE_DOC | ARGP_HELP_POST_DOC)
-#define ARGP_HELP_BUG_ADDR	0x40 /* bug report address */
-#define ARGP_HELP_LONG_ONLY	0x80 /* modify output appropriately to
-					reflect ARGP_LONG_ONLY mode.  */
-
-/* These ARGP_HELP flags are only understood by argp_state_help.  */
-#define ARGP_HELP_EXIT_ERR	0x100 /* Call exit(1) instead of returning.  */
-#define ARGP_HELP_EXIT_OK	0x200 /* Call exit(0) instead of returning.  */
-
-/* The standard thing to do after a program command line parsing error, if an
-   error message has already been printed.  */
-#define ARGP_HELP_STD_ERR \
-  (ARGP_HELP_SEE | ARGP_HELP_EXIT_ERR)
-/* The standard thing to do after a program command line parsing error, if no
-   more specific error message has been printed.  */
-#define ARGP_HELP_STD_USAGE \
-  (ARGP_HELP_SHORT_USAGE | ARGP_HELP_SEE | ARGP_HELP_EXIT_ERR)
-/* The standard thing to do in response to a --help option.  */
-#define ARGP_HELP_STD_HELP \
-  (ARGP_HELP_SHORT_USAGE | ARGP_HELP_LONG | ARGP_HELP_EXIT_OK \
-   | ARGP_HELP_DOC | ARGP_HELP_BUG_ADDR)
-
-/* Output a usage message for ARGP to STREAM.  FLAGS are from the set
-   ARGP_HELP_*.  */
-extern void argp_help (__const struct argp *__restrict __argp,
-		       FILE *__restrict __stream,
-		       unsigned __flags, char *__restrict __name) __THROW;
-extern void __argp_help (__const struct argp *__restrict __argp,
-			 FILE *__restrict __stream, unsigned __flags,
-			 char *__name) __THROW;
-
-/* The following routines are intended to be called from within an argp
-   parsing routine (thus taking an argp_state structure as the first
-   argument).  They may or may not print an error message and exit, depending
-   on the flags in STATE -- in any case, the caller should be prepared for
-   them *not* to exit, and should return an appropiate error after calling
-   them.  [argp_usage & argp_error should probably be called argp_state_...,
-   but they're used often enough that they should be short]  */
-
-/* Output, if appropriate, a usage message for STATE to STREAM.  FLAGS are
-   from the set ARGP_HELP_*.  */
-extern void argp_state_help (__const struct argp_state *__restrict __state,
-			     FILE *__restrict __stream,
-			     unsigned int __flags) __THROW;
-extern void __argp_state_help (__const struct argp_state *__restrict __state,
-			       FILE *__restrict __stream,
-			       unsigned int __flags) __THROW;
-
-/* Possibly output the standard usage message for ARGP to stderr and exit.  */
-extern void argp_usage (__const struct argp_state *__state) __THROW;
-extern void __argp_usage (__const struct argp_state *__state) __THROW;
-
-/* If appropriate, print the printf string FMT and following args, preceded
-   by the program name and `:', to stderr, and followed by a `Try ... --help'
-   message, then exit (1).  */
-extern void argp_error (__const struct argp_state *__restrict __state,
-			__const char *__restrict __fmt, ...) __THROW
-     __attribute__ ((__format__ (__printf__, 2, 3)));
-extern void __argp_error (__const struct argp_state *__restrict __state,
-			  __const char *__restrict __fmt, ...) __THROW
-     __attribute__ ((__format__ (__printf__, 2, 3)));
-
-/* Similar to the standard gnu error-reporting function error(), but will
-   respect the ARGP_NO_EXIT and ARGP_NO_ERRS flags in STATE, and will print
-   to STATE->err_stream.  This is useful for argument parsing code that is
-   shared between program startup (when exiting is desired) and runtime
-   option parsing (when typically an error code is returned instead).  The
-   difference between this function and argp_error is that the latter is for
-   *parsing errors*, and the former is for other problems that occur during
-   parsing but don't reflect a (syntactic) problem with the input.  */
-extern void argp_failure (__const struct argp_state *__restrict __state,
-			  int __status, int __errnum,
-			  __const char *__restrict __fmt, ...) __THROW
-     __attribute__ ((__format__ (__printf__, 4, 5)));
-extern void __argp_failure (__const struct argp_state *__restrict __state,
-			    int __status, int __errnum,
-			    __const char *__restrict __fmt, ...) __THROW
-     __attribute__ ((__format__ (__printf__, 4, 5)));
-
-/* Returns true if the option OPT is a valid short option.  */
-extern int _option_is_short (__const struct argp_option *__opt) __THROW;
-extern int __option_is_short (__const struct argp_option *__opt) __THROW;
-
-/* Returns true if the option OPT is in fact the last (unused) entry in an
-   options array.  */
-extern int _option_is_end (__const struct argp_option *__opt) __THROW;
-extern int __option_is_end (__const struct argp_option *__opt) __THROW;
-
-/* Return the input field for ARGP in the parser corresponding to STATE; used
-   by the help routines.  */
-extern void *_argp_input (__const struct argp *__restrict __argp,
-			  __const struct argp_state *__restrict __state)
-     __THROW;
-extern void *__argp_input (__const struct argp *__restrict __argp,
-			   __const struct argp_state *__restrict __state)
-     __THROW;
-
-#ifdef __USE_EXTERN_INLINES
-
-# if !_LIBC
-#  define __argp_usage argp_usage
-#  define __argp_state_help argp_state_help
-#  define __option_is_short _option_is_short
-#  define __option_is_end _option_is_end
-# endif
-
-# ifndef ARGP_EI
-#  define ARGP_EI extern __inline__
-# endif
-
-ARGP_EI void
-__argp_usage (__const struct argp_state *__state) __THROW
-{
-  __argp_state_help (__state, stderr, ARGP_HELP_STD_USAGE);
-}
-
-ARGP_EI int
-__option_is_short (__const struct argp_option *__opt) __THROW
-{
-  if (__opt->flags & OPTION_DOC)
-    return 0;
-  else
-    {
-      int __key = __opt->key;
-      return __key > 0 && isprint (__key);
-    }
-}
-
-ARGP_EI int
-__option_is_end (__const struct argp_option *__opt) __THROW
-{
-  return !__opt->key && !__opt->name && !__opt->doc && !__opt->group;
-}
-
-# if !_LIBC
-#  undef __argp_usage
-#  undef __argp_state_help
-#  undef __option_is_short
-#  undef __option_is_end
-# endif
-#endif /* Use extern inlines.  */
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* argp.h */
diff --git a/newlib/libc/sys/linux/include/arpa/ftp.h b/newlib/libc/sys/linux/include/arpa/ftp.h
deleted file mode 100644
index 9a3648854..000000000
--- a/newlib/libc/sys/linux/include/arpa/ftp.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (c) 1983, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ftp.h	8.1 (Berkeley) 6/2/93
- */
-
-#ifndef _ARPA_FTP_H_
-#define	_ARPA_FTP_H_
-
-/* Definitions for FTP; see RFC-765. */
-
-/*
- * Reply codes.
- */
-#define PRELIM		1	/* positive preliminary */
-#define COMPLETE	2	/* positive completion */
-#define CONTINUE	3	/* positive intermediate */
-#define TRANSIENT	4	/* transient negative completion */
-#define ERROR		5	/* permanent negative completion */
-
-/*
- * Type codes
- */
-#define	TYPE_A		1	/* ASCII */
-#define	TYPE_E		2	/* EBCDIC */
-#define	TYPE_I		3	/* image */
-#define	TYPE_L		4	/* local byte size */
-
-#ifdef FTP_NAMES
-char *typenames[] =  {"0", "ASCII", "EBCDIC", "Image", "Local" };
-#endif
-
-/*
- * Form codes
- */
-#define	FORM_N		1	/* non-print */
-#define	FORM_T		2	/* telnet format effectors */
-#define	FORM_C		3	/* carriage control (ASA) */
-#ifdef FTP_NAMES
-char *formnames[] =  {"0", "Nonprint", "Telnet", "Carriage-control" };
-#endif
-
-/*
- * Structure codes
- */
-#define	STRU_F		1	/* file (no record structure) */
-#define	STRU_R		2	/* record structure */
-#define	STRU_P		3	/* page structure */
-#ifdef FTP_NAMES
-char *strunames[] =  {"0", "File", "Record", "Page" };
-#endif
-
-/*
- * Mode types
- */
-#define	MODE_S		1	/* stream */
-#define	MODE_B		2	/* block */
-#define	MODE_C		3	/* compressed */
-#ifdef FTP_NAMES
-char *modenames[] =  {"0", "Stream", "Block", "Compressed" };
-#endif
-
-/*
- * Record Tokens
- */
-#define	REC_ESC		'\377'	/* Record-mode Escape */
-#define	REC_EOR		'\001'	/* Record-mode End-of-Record */
-#define REC_EOF		'\002'	/* Record-mode End-of-File */
-
-/*
- * Block Header
- */
-#define	BLK_EOR		0x80	/* Block is End-of-Record */
-#define	BLK_EOF		0x40	/* Block is End-of-File */
-#define BLK_ERRORS	0x20	/* Block is suspected of containing errors */
-#define	BLK_RESTART	0x10	/* Block is Restart Marker */
-
-#define	BLK_BYTECOUNT	2	/* Bytes in this block */
-
-#endif /* !_FTP_H_ */
diff --git a/newlib/libc/sys/linux/include/arpa/inet.h b/newlib/libc/sys/linux/include/arpa/inet.h
deleted file mode 100644
index 82bcf356d..000000000
--- a/newlib/libc/sys/linux/include/arpa/inet.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- *
- *	@(#)inet.h	8.1 (Berkeley) 6/2/93
- *	From: Id: inet.h,v 8.5 1997/01/29 08:48:09 vixie Exp $
- * $FreeBSD: src/include/arpa/inet.h,v 1.22 2002/04/10 10:51:53 mike Exp $
- */
-
-#ifndef _ARPA_INET_H_
-#define	_ARPA_INET_H_
-
-/* External definitions for functions in inet(3), addr2ascii(3) */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/ansi.h>
-
-/* Required for byteorder(3) functions. */
-#include <machine/endian.h>
-
-#define	INET_ADDRSTRLEN		16
-#define	INET6_ADDRSTRLEN	46
-
-#ifndef _UINT16_T_DECLARED
-typedef	__uint16_t	uint16_t;
-#define	_UINT16_T_DECLARED
-#endif
-
-#ifndef _UINT32_T_DECLARED
-typedef	__uint32_t	uint32_t;
-#define	_UINT32_T_DECLARED
-#endif
-
-#ifndef	_IN_ADDR_T_DECLARED
-typedef	uint32_t	in_addr_t;
-#define	_IN_ADDR_T_DECLARED
-#endif
-
-#ifndef	_IN_PORT_T_DECLARED
-typedef	uint16_t	in_port_t;
-#define	_IN_PORT_T_DECLARED
-#endif
-
-#ifndef _POSIX_SOURCE
-#ifdef	_BSD_SIZE_T_
-typedef	_BSD_SIZE_T_	size_t;
-#undef	_BSD_SIZE_T_
-#endif
-#endif /* !_POSIX_SOURCE */
-
-/*
- * XXX socklen_t is used by a POSIX.1-2001 interface, but not required by
- * POSIX.1-2001.
- */
-
-
-#ifndef __socklen_t_defined
-typedef unsigned int socklen_t;
-#define __socklen_t_defined 1
-#endif
-
-#ifdef	_BSD_SOCKLEN_T_
-typedef	_BSD_SOCKLEN_T_	socklen_t;
-#undef	_BSD_SOCKLEN_T_
-#endif
-
-#ifndef _STRUCT_IN_ADDR_DECLARED
-struct in_addr {
-	in_addr_t s_addr;
-};
-#define	_STRUCT_IN_ADDR_DECLARED
-#endif
-
-#define	inet_addr	__inet_addr
-#define	inet_aton	__inet_aton
-#define	inet_lnaof	__inet_lnaof
-#define	inet_makeaddr	__inet_makeaddr
-#define	inet_neta	__inet_neta
-#define	inet_netof	__inet_netof
-#define	inet_network	__inet_network
-#define	inet_net_ntop	__inet_net_ntop
-#define	inet_net_pton	__inet_net_pton
-#define	inet_ntoa	__inet_ntoa
-#define	inet_pton	__inet_pton
-#define	inet_ntop	__inet_ntop
-#define	inet_nsap_addr	__inet_nsap_addr
-#define	inet_nsap_ntoa	__inet_nsap_ntoa
-
-__BEGIN_DECLS
-in_addr_t	 inet_addr(const char *);
-char		*inet_ntoa(struct in_addr);
-const char	*inet_ntop(int, const void *, char *, socklen_t);
-int		 inet_pton(int, const char *, void *);
-
-int		 ascii2addr(int, const char *, void *);
-char		*addr2ascii(int, const void *, int, char *);
-int		 inet_aton(const char *, struct in_addr *);
-in_addr_t	 inet_lnaof(struct in_addr);
-struct in_addr	 inet_makeaddr(in_addr_t, in_addr_t);
-char *		 inet_neta(in_addr_t, char *, size_t);
-in_addr_t	 inet_netof(struct in_addr);
-in_addr_t	 inet_network(const char *);
-char		*inet_net_ntop(int, const void *, int, char *, size_t);
-int		 inet_net_pton(int, const char *, void *, size_t);
-unsigned	 inet_nsap_addr(const char *, unsigned char *, int);
-char		*inet_nsap_ntoa(int, const unsigned char *, char *);
-__END_DECLS
-
-#endif /* !_ARPA_INET_H_ */
diff --git a/newlib/libc/sys/linux/include/arpa/nameser.h b/newlib/libc/sys/linux/include/arpa/nameser.h
deleted file mode 100644
index 8735b8bd3..000000000
--- a/newlib/libc/sys/linux/include/arpa/nameser.h
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Copyright (c) 1983, 1989, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- *	From: Id: nameser.h,v 8.16 1998/02/06 00:35:58 halley Exp
- * $FreeBSD: src/include/arpa/nameser.h,v 1.16 2002/03/23 17:24:55 imp Exp $
- */
-
-#ifndef _ARPA_NAMESER_H_
-#define _ARPA_NAMESER_H_
-
-#define BIND_4_COMPAT
-
-#include <sys/types.h>
-#include <sys/cdefs.h>
-
-/*
- * revision information.  this is the release date in YYYYMMDD format.
- * it can change every day so the right thing to do with it is use it
- * in preprocessor commands such as "#if (__NAMESER > 19931104)".  do not
- * compare for equality; rather, use it to determine whether your libnameser.a
- * is new enough to contain a certain feature.
- */
-
-/* XXXRTH I made this bigger than __BIND in 4.9.5 T6B */
-#define __NAMESER	19961001	/* New interface version stamp. */
-
-/*
- * Define constants based on RFC 883, RFC 1034, RFC 1035
- */
-#define NS_PACKETSZ	512	/* maximum packet size */
-#define NS_MAXDNAME	1025	/* maximum domain name */
-#define NS_MAXCDNAME	255	/* maximum compressed domain name */
-#define NS_MAXLABEL	63	/* maximum length of domain label */
-#define NS_HFIXEDSZ	12	/* #/bytes of fixed data in header */
-#define NS_QFIXEDSZ	4	/* #/bytes of fixed data in query */
-#define NS_RRFIXEDSZ	10	/* #/bytes of fixed data in r record */
-#define NS_INT32SZ	4	/* #/bytes of data in a u_int32_t */
-#define NS_INT16SZ	2	/* #/bytes of data in a u_int16_t */
-#define NS_INT8SZ	1	/* #/bytes of data in a u_int8_t */
-#define NS_INADDRSZ	4	/* IPv4 T_A */
-#define NS_IN6ADDRSZ	16	/* IPv6 T_AAAA */
-#define NS_CMPRSFLGS	0xc0	/* Flag bits indicating name compression. */
-#define NS_DEFAULTPORT	53	/* For both TCP and UDP. */
-
-/*
- * These can be expanded with synonyms, just keep ns_parse.c:ns_parserecord()
- * in synch with it.
- */
-typedef enum __ns_sect {
-	ns_s_qd = 0,		/* Query: Question. */
-	ns_s_zn = 0,		/* Update: Zone. */
-	ns_s_an = 1,		/* Query: Answer. */
-	ns_s_pr = 1,		/* Update: Prerequisites. */
-	ns_s_ns = 2,		/* Query: Name servers. */
-	ns_s_ud = 2,		/* Update: Update. */
-	ns_s_ar = 3,		/* Query|Update: Additional records. */
-	ns_s_max = 4
-} ns_sect;
-
-/*
- * This is a message handle.  It is caller allocated and has no dynamic data.
- * This structure is intended to be opaque to all but ns_parse.c, thus the
- * leading _'s on the member names.  Use the accessor functions, not the _'s.
- */
-typedef struct __ns_msg {
-	const u_char	*_msg, *_eom;
-	u_int16_t	_id, _flags, _counts[ns_s_max];
-	const u_char	*_sections[ns_s_max];
-	ns_sect		_sect;
-	int		_rrnum;
-	const u_char	*_ptr;
-} ns_msg;
-
-/* Private data structure - do not use from outside library. */
-struct _ns_flagdata {  int mask, shift;  };
-extern struct _ns_flagdata _ns_flagdata[];
-
-/* Accessor macros - this is part of the public interface. */
-#define ns_msg_getflag(handle, flag) ( \
-			((handle)._flags & _ns_flagdata[flag].mask) \
-			 >> _ns_flagdata[flag].shift \
-			)
-#define ns_msg_id(handle) ((handle)._id + 0)
-#define ns_msg_base(handle) ((handle)._msg + 0)
-#define ns_msg_end(handle) ((handle)._eom + 0)
-#define ns_msg_size(handle) ((handle)._eom - (handle)._msg)
-#define ns_msg_count(handle, section) ((handle)._counts[section] + 0)
-
-/*
- * This is a parsed record.  It is caller allocated and has no dynamic data.
- */
-typedef	struct __ns_rr {
-	char		name[NS_MAXDNAME];	/* XXX need to malloc */
-	u_int16_t	type;
-	u_int16_t	rr_class;
-	u_int32_t	ttl;
-	u_int16_t	rdlength;
-	const u_char	*rdata;
-} ns_rr;
-
-/* Accessor macros - this is part of the public interface. */
-#define ns_rr_name(rr)	(((rr).name[0] != '\0') ? (rr).name : ".")
-#define ns_rr_type(rr)	((rr).type + 0)
-#define ns_rr_class(rr)	((rr).rr_class + 0)
-#define ns_rr_ttl(rr)	((rr).ttl + 0)
-#define ns_rr_rdlen(rr)	((rr).rdlength + 0)
-#define ns_rr_rdata(rr)	((rr).rdata + 0)
-
-/*
- * These don't have to be in the same order as in the packet flags word,
- * and they can even overlap in some cases, but they will need to be kept
- * in synch with ns_parse.c:ns_flagdata[].
- */
-typedef enum __ns_flag {
-	ns_f_qr,		/* Question/Response. */
-	ns_f_opcode,		/* Operation code. */
-	ns_f_aa,		/* Authoritative Answer. */
-	ns_f_tc,		/* Truncation occurred. */
-	ns_f_rd,		/* Recursion Desired. */
-	ns_f_ra,		/* Recursion Available. */
-	ns_f_z,			/* MBZ. */
-	ns_f_ad,		/* Authentic Data (DNSSEC). */
-	ns_f_cd,		/* Checking Disabled (DNSSEC). */
-	ns_f_rcode,		/* Response code. */
-	ns_f_max
-} ns_flag;
-
-/*
- * Currently defined opcodes.
- */
-typedef enum __ns_opcode {
-	ns_o_query = 0,		/* Standard query. */
-	ns_o_iquery = 1,	/* Inverse query (deprecated/unsupported). */
-	ns_o_status = 2,	/* Name server status query (unsupported). */
-				/* Opcode 3 is undefined/reserved. */
-	ns_o_notify = 4,	/* Zone change notification. */
-	ns_o_update = 5,	/* Zone update message. */
-	ns_o_max = 6
-} ns_opcode;
-
-/*
- * Currently defined response codes.
- */
-typedef	enum __ns_rcode {
-	ns_r_noerror = 0,	/* No error occurred. */
-	ns_r_formerr = 1,	/* Format error. */
-	ns_r_servfail = 2,	/* Server failure. */
-	ns_r_nxdomain = 3,	/* Name error. */
-	ns_r_notimpl = 4,	/* Unimplemented. */
-	ns_r_refused = 5,	/* Operation refused. */
-	/* these are for BIND_UPDATE */
-	ns_r_yxdomain = 6,	/* Name exists */
-	ns_r_yxrrset = 7,	/* RRset exists */
-	ns_r_nxrrset = 8,	/* RRset does not exist */
-	ns_r_notauth = 9,	/* Not authoritative for zone */
-	ns_r_notzone = 10,	/* Zone of record different from zone section */
-	ns_r_max = 11
-} ns_rcode;
-
-/* BIND_UPDATE */
-typedef enum __ns_update_operation {
-	ns_uop_delete = 0,
-	ns_uop_add = 1,
-	ns_uop_max = 2
-} ns_update_operation;
-
-/*
- * This RR-like structure is particular to UPDATE.
- */
-struct ns_updrec {
-	struct ns_updrec *r_prev;	/* prev record */
-	struct ns_updrec *r_next;	/* next record */
-	u_int8_t	r_section;	/* ZONE/PREREQUISITE/UPDATE */
-	char *		r_dname;	/* owner of the RR */
-	u_int16_t	r_class;	/* class number */
-	u_int16_t	r_type;		/* type number */
-	u_int32_t	r_ttl;		/* time to live */
-	u_char *	r_data;		/* rdata fields as text string */
-	u_int16_t	r_size;		/* size of r_data field */
-	int		r_opcode;	/* type of operation */
-	/* following fields for private use by the resolver/server routines */
-	struct ns_updrec *r_grpnext;	/* next record when grouped */
-	struct databuf *r_dp;		/* databuf to process */
-	struct databuf *r_deldp;	/* databuf's deleted/overwritten */
-	u_int16_t	r_zone;		/* zone number on server */
-};
-typedef struct ns_updrec ns_updrec;
-
-/*
- * Currently defined type values for resources and queries.
- */
-typedef enum __ns_type {
-	ns_t_a = 1,		/* Host address. */
-	ns_t_ns = 2,		/* Authoritative server. */
-	ns_t_md = 3,		/* Mail destination. */
-	ns_t_mf = 4,		/* Mail forwarder. */
-	ns_t_cname = 5,		/* Canonical name. */
-	ns_t_soa = 6,		/* Start of authority zone. */
-	ns_t_mb = 7,		/* Mailbox domain name. */
-	ns_t_mg = 8,		/* Mail group member. */
-	ns_t_mr = 9,		/* Mail rename name. */
-	ns_t_null = 10,		/* Null resource record. */
-	ns_t_wks = 11,		/* Well known service. */
-	ns_t_ptr = 12,		/* Domain name pointer. */
-	ns_t_hinfo = 13,	/* Host information. */
-	ns_t_minfo = 14,	/* Mailbox information. */
-	ns_t_mx = 15,		/* Mail routing information. */
-	ns_t_txt = 16,		/* Text strings. */
-	ns_t_rp = 17,		/* Responsible person. */
-	ns_t_afsdb = 18,	/* AFS cell database. */
-	ns_t_x25 = 19,		/* X_25 calling address. */
-	ns_t_isdn = 20,		/* ISDN calling address. */
-	ns_t_rt = 21,		/* Router. */
-	ns_t_nsap = 22,		/* NSAP address. */
-	ns_t_nsap_ptr = 23,	/* Reverse NSAP lookup (deprecated). */
-	ns_t_sig = 24,		/* Security signature. */
-	ns_t_key = 25,		/* Security key. */
-	ns_t_px = 26,		/* X.400 mail mapping. */
-	ns_t_gpos = 27,		/* Geographical position (withdrawn). */
-	ns_t_aaaa = 28,		/* Ip6 Address. */
-	ns_t_loc = 29,		/* Location Information. */
-	ns_t_nxt = 30,		/* Next domain (security). */
-	ns_t_eid = 31,		/* Endpoint identifier. */
-	ns_t_nimloc = 32,	/* Nimrod Locator. */
-	ns_t_srv = 33,		/* Server Selection. */
-	ns_t_atma = 34,		/* ATM Address */
-	ns_t_naptr = 35,	/* Naming Authority PoinTeR */
-	ns_t_opt = 41,		/* OPT pseudo-RR, RFC2761 */
-	/* Query type values which do not appear in resource records. */
-	ns_t_ixfr = 251,	/* Incremental zone transfer. */
-	ns_t_axfr = 252,	/* Transfer zone of authority. */
-	ns_t_mailb = 253,	/* Transfer mailbox records. */
-	ns_t_maila = 254,	/* Transfer mail agent records. */
-	ns_t_any = 255,		/* Wildcard match. */
-	ns_t_max = 65536
-} ns_type;
-
-/*
- * Values for class field
- */
-typedef enum __ns_class {
-	ns_c_in = 1,		/* Internet. */
-				/* Class 2 unallocated/unsupported. */
-	ns_c_chaos = 3,		/* MIT Chaos-net. */
-	ns_c_hs = 4,		/* MIT Hesiod. */
-	/* Query class values which do not appear in resource records */
-	ns_c_none = 254,	/* for prereq. sections in update requests */
-	ns_c_any = 255,		/* Wildcard match. */
-	ns_c_max = 65536
-} ns_class;
-
-/*
- * Flags field of the KEY RR rdata
- */
-#define	NS_KEY_TYPEMASK		0xC000	/* Mask for "type" bits */
-#define	NS_KEY_TYPE_AUTH_CONF	0x0000	/* Key usable for both */
-#define	NS_KEY_TYPE_CONF_ONLY	0x8000	/* Key usable for confidentiality */
-#define	NS_KEY_TYPE_AUTH_ONLY	0x4000	/* Key usable for authentication */
-#define	NS_KEY_TYPE_NO_KEY	0xC000	/* No key usable for either; no key */
-/* The type bits can also be interpreted independently, as single bits: */
-#define	NS_KEY_NO_AUTH		0x8000	/* Key unusable for authentication */
-#define	NS_KEY_NO_CONF		0x4000	/* Key unusable for confidentiality */
-#define	NS_KEY_EXPERIMENTAL	0x2000	/* Security is *mandatory* if bit=0 */
-#define	NS_KEY_RESERVED3	0x1000  /* reserved - must be zero */
-#define	NS_KEY_RESERVED4	0x0800  /* reserved - must be zero */
-#define	NS_KEY_USERACCOUNT	0x0400	/* key is assoc. with a user acct */
-#define	NS_KEY_ENTITY		0x0200	/* key is assoc. with entity eg host */
-#define	NS_KEY_ZONEKEY		0x0100	/* key is zone key */
-#define	NS_KEY_IPSEC		0x0080  /* key is for IPSEC (host or user)*/
-#define	NS_KEY_EMAIL		0x0040  /* key is for email (MIME security) */
-#define	NS_KEY_RESERVED10	0x0020  /* reserved - must be zero */
-#define	NS_KEY_RESERVED11	0x0010  /* reserved - must be zero */
-#define	NS_KEY_SIGNATORYMASK	0x000F	/* key can sign RR's of same name */
-
-#define	NS_KEY_RESERVED_BITMASK ( NS_KEY_RESERVED3 | \
-				  NS_KEY_RESERVED4 | \
-				  NS_KEY_RESERVED10 | \
-				  NS_KEY_RESERVED11 )
-
-/* The Algorithm field of the KEY and SIG RR's is an integer, {1..254} */
-#define	NS_ALG_MD5RSA		1	/* MD5 with RSA */
-#define	NS_ALG_EXPIRE_ONLY	253	/* No alg, no security */
-#define	NS_ALG_PRIVATE_OID	254	/* Key begins with OID giving alg */
-
-/* Signatures */
-#define	NS_MD5RSA_MIN_BITS	 512	/* Size of a mod or exp in bits */
-#define	NS_MD5RSA_MAX_BITS	2552
-	/* Total of binary mod and exp */
-#define	NS_MD5RSA_MAX_BYTES	((NS_MD5RSA_MAX_BITS+7/8)*2+3)
-	/* Max length of text sig block */
-#define	NS_MD5RSA_MAX_BASE64	(((NS_MD5RSA_MAX_BYTES+2)/3)*4)
-
-/* Offsets into SIG record rdata to find various values */
-#define	NS_SIG_TYPE	0	/* Type flags */
-#define	NS_SIG_ALG	2	/* Algorithm */
-#define	NS_SIG_LABELS	3	/* How many labels in name */
-#define	NS_SIG_OTTL	4	/* Original TTL */
-#define	NS_SIG_EXPIR	8	/* Expiration time */
-#define	NS_SIG_SIGNED	12	/* Signature time */
-#define	NS_SIG_FOOT	16	/* Key footprint */
-#define	NS_SIG_SIGNER	18	/* Domain name of who signed it */
-
-/* How RR types are represented as bit-flags in NXT records */
-#define	NS_NXT_BITS 8
-#define	NS_NXT_BIT_SET(  n,p) (p[(n)/NS_NXT_BITS] |=  (0x80>>((n)%NS_NXT_BITS)))
-#define	NS_NXT_BIT_CLEAR(n,p) (p[(n)/NS_NXT_BITS] &= ~(0x80>>((n)%NS_NXT_BITS)))
-#define	NS_NXT_BIT_ISSET(n,p) (p[(n)/NS_NXT_BITS] &   (0x80>>((n)%NS_NXT_BITS)))
-
-
-/*
- * Inline versions of get/put short/long.  Pointer is advanced.
- */
-#define NS_GET16(s, cp) { \
-	register u_char *t_cp = (u_char *)(cp); \
-	(s) = ((u_int16_t)t_cp[0] << 8) \
-	    | ((u_int16_t)t_cp[1]) \
-	    ; \
-	(cp) += NS_INT16SZ; \
-}
-
-#define NS_GET32(l, cp) { \
-	register u_char *t_cp = (u_char *)(cp); \
-	(l) = ((u_int32_t)t_cp[0] << 24) \
-	    | ((u_int32_t)t_cp[1] << 16) \
-	    | ((u_int32_t)t_cp[2] << 8) \
-	    | ((u_int32_t)t_cp[3]) \
-	    ; \
-	(cp) += NS_INT32SZ; \
-}
-
-#define NS_PUT16(s, cp) { \
-	register u_int16_t t_s = (u_int16_t)(s); \
-	register u_char *t_cp = (u_char *)(cp); \
-	*t_cp++ = t_s >> 8; \
-	*t_cp   = t_s; \
-	(cp) += NS_INT16SZ; \
-}
-
-#define NS_PUT32(l, cp) { \
-	register u_int32_t t_l = (u_int32_t)(l); \
-	register u_char *t_cp = (u_char *)(cp); \
-	*t_cp++ = t_l >> 24; \
-	*t_cp++ = t_l >> 16; \
-	*t_cp++ = t_l >> 8; \
-	*t_cp   = t_l; \
-	(cp) += NS_INT32SZ; \
-}
-
-/*
- * ANSI C identifier hiding.
- */
-#define ns_get16		__ns_get16
-#define ns_get32		__ns_get32
-#define ns_put16		__ns_put16
-#define ns_put32		__ns_put32
-#define ns_initparse		__ns_initparse
-#define ns_parserr		__ns_parserr
-#define	ns_sprintrr		__ns_sprintrr
-#define	ns_sprintrrf		__ns_sprintrrf
-#define	ns_format_ttl		__ns_format_ttl
-#define	ns_parse_ttl		__ns_parse_ttl
-#define	ns_name_ntop		__ns_name_ntop
-#define	ns_name_pton		__ns_name_pton
-#define	ns_name_unpack		__ns_name_unpack
-#define	ns_name_pack		__ns_name_pack
-#define	ns_name_compress	__ns_name_compress
-#define	ns_name_uncompress	__ns_name_uncompress
-
-__BEGIN_DECLS
-u_int		ns_get16(const u_char *);
-u_long		ns_get32(const u_char *);
-void		ns_put16(u_int, u_char *);
-void		ns_put32(u_long, u_char *);
-int		ns_initparse(const u_char *, int, ns_msg *);
-int		ns_parserr(ns_msg *, ns_sect, int, ns_rr *);
-int		ns_sprintrr(const ns_msg *, const ns_rr *,
-			    const char *, const char *, char *, size_t);
-int		ns_sprintrrf(const u_char *, size_t, const char *,
-			     ns_class, ns_type, u_long, const u_char *,
-			     size_t, const char *, const char *,
-			     char *, size_t);
-int		ns_format_ttl(u_long, char *, size_t);
-int		ns_parse_ttl(const char *, u_long *);
-int		ns_name_ntop(const u_char *, char *, size_t);
-int		ns_name_pton(const char *, u_char *, size_t);
-int		ns_name_unpack(const u_char *, const u_char *,
-			       const u_char *, u_char *, size_t);
-int		ns_name_pack(const u_char *, u_char *, int,
-			     const u_char **, const u_char **);
-int		ns_name_uncompress(const u_char *, const u_char *,
-				   const u_char *, char *, size_t);
-int		ns_name_compress(const char *, u_char *, size_t,
-				 const u_char **, const u_char **);
-int		ns_name_skip(const u_char **, const u_char *);
-__END_DECLS
-
-#ifdef BIND_4_COMPAT
-#include <arpa/nameser_compat.h>
-#endif
-
-#endif /* !_ARPA_NAMESER_H_ */
diff --git a/newlib/libc/sys/linux/include/arpa/nameser_compat.h b/newlib/libc/sys/linux/include/arpa/nameser_compat.h
deleted file mode 100644
index bbdea8979..000000000
--- a/newlib/libc/sys/linux/include/arpa/nameser_compat.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* Copyright (c) 1983, 1989
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- *      from nameser.h	8.1 (Berkeley) 6/2/93
- *	From: Id: nameser_compat.h,v 8.9 1998/03/20 23:25:10 halley Exp
- * $FreeBSD: src/include/arpa/nameser_compat.h,v 1.3 2001/06/10 20:25:22 ume Exp $
- */
-
-#ifndef _ARPA_NAMESER_COMPAT_
-#define	_ARPA_NAMESER_COMPAT_
-
-#define	__BIND		19950621	/* (DEAD) interface version stamp. */
-
-#include <endian.h>
-#include <machine/endian.h>
-
-#if !defined(BYTE_ORDER) || \
-    (BYTE_ORDER != BIG_ENDIAN && BYTE_ORDER != LITTLE_ENDIAN && \
-    BYTE_ORDER != PDP_ENDIAN)
-	/* you must determine what the correct bit order is for
-	 * your compiler - the next line is an intentional error
-	 * which will force your compiles to bomb until you fix
-	 * the above macros.
-	 */
-  error "Undefined or invalid BYTE_ORDER";
-#endif
-
-/*
- * Structure for query header.  The order of the fields is machine- and
- * compiler-dependent, depending on the byte/bit order and the layout
- * of bit fields.  We use bit fields only in int variables, as this
- * is all ANSI requires.  This requires a somewhat confusing rearrangement.
- */
-
-typedef struct {
-	unsigned	id :16;		/* query identification number */
-#if BYTE_ORDER == LITTLE_ENDIAN || BYTE_ORDER == PDP_ENDIAN
-			/* fields in third byte */
-	unsigned	rd :1;		/* recursion desired */
-	unsigned	tc :1;		/* truncated message */
-	unsigned	aa :1;		/* authoritive answer */
-	unsigned	opcode :4;	/* purpose of message */
-	unsigned	qr :1;		/* response flag */
-			/* fields in fourth byte */
-	unsigned	rcode :4;	/* response code */
-	unsigned	cd: 1;		/* checking disabled by resolver */
-	unsigned	ad: 1;		/* authentic data from named */
-	unsigned	unused :1;	/* unused bits (MBZ as of 4.9.3a3) */
-	unsigned	ra :1;		/* recursion available */
-#endif
-			/* remaining bytes */
-	unsigned	qdcount :16;	/* number of question entries */
-	unsigned	ancount :16;	/* number of answer entries */
-	unsigned	nscount :16;	/* number of authority entries */
-	unsigned	arcount :16;	/* number of resource entries */
-} HEADER;
-
-#define PACKETSZ	NS_PACKETSZ
-#define MAXDNAME	NS_MAXDNAME
-#define MAXCDNAME	NS_MAXCDNAME
-#define MAXLABEL	NS_MAXLABEL
-#define	HFIXEDSZ	NS_HFIXEDSZ
-#define QFIXEDSZ	NS_QFIXEDSZ
-#define RRFIXEDSZ	NS_RRFIXEDSZ
-#define	INT32SZ		NS_INT32SZ
-#define	INT16SZ		NS_INT16SZ
-#define	INADDRSZ	NS_INADDRSZ
-#define	IN6ADDRSZ	NS_IN6ADDRSZ
-#define	INDIR_MASK	NS_CMPRSFLGS
-#define NAMESERVER_PORT	NS_DEFAULTPORT
-
-#define S_ZONE		ns_s_zn
-#define S_PREREQ	ns_s_pr
-#define S_UPDATE	ns_s_ud
-#define S_ADDT		ns_s_ar
-
-#define QUERY		ns_o_query
-#define IQUERY		ns_o_iquery
-#define STATUS		ns_o_status
-#define	NS_NOTIFY_OP	ns_o_notify
-#define	NS_UPDATE_OP	ns_o_update
-
-#define NOERROR		ns_r_noerror
-#define FORMERR		ns_r_formerr
-#define SERVFAIL	ns_r_servfail
-#define NXDOMAIN	ns_r_nxdomain
-#define NOTIMP		ns_r_notimpl
-#define REFUSED		ns_r_refused
-#define YXDOMAIN	ns_r_yxdomain
-#define YXRRSET		ns_r_yxrrset
-#define NXRRSET		ns_r_nxrrset
-#define NOTAUTH		ns_r_notauth
-#define NOTZONE		ns_r_notzone
-
-#define DELETE		ns_uop_delete
-#define ADD		ns_uop_add
-
-#define T_A		ns_t_a
-#define T_NS		ns_t_ns
-#define T_MD		ns_t_md
-#define T_MF		ns_t_mf
-#define T_CNAME		ns_t_cname
-#define T_SOA		ns_t_soa
-#define T_MB		ns_t_mb
-#define T_MG		ns_t_mg
-#define T_MR		ns_t_mr
-#define T_NULL		ns_t_null
-#define T_WKS		ns_t_wks
-#define T_PTR		ns_t_ptr
-#define T_HINFO		ns_t_hinfo
-#define T_MINFO		ns_t_minfo
-#define T_MX		ns_t_mx
-#define T_TXT		ns_t_txt
-#define	T_RP		ns_t_rp
-#define T_AFSDB		ns_t_afsdb
-#define T_X25		ns_t_x25
-#define T_ISDN		ns_t_isdn
-#define T_RT		ns_t_rt
-#define T_NSAP		ns_t_nsap
-#define T_NSAP_PTR	ns_t_nsap_ptr
-#define	T_SIG		ns_t_sig
-#define	T_KEY		ns_t_key
-#define	T_PX		ns_t_px
-#define	T_GPOS		ns_t_gpos
-#define	T_AAAA		ns_t_aaaa
-#define	T_LOC		ns_t_loc
-#define	T_NXT		ns_t_nxt
-#define	T_EID		ns_t_eid
-#define	T_NIMLOC	ns_t_nimloc
-#define	T_SRV		ns_t_srv
-#define T_ATMA		ns_t_atma
-#define T_NAPTR		ns_t_naptr
-#define T_OPT		ns_t_opt
-#define	T_IXFR		ns_t_ixfr
-#define T_AXFR		ns_t_axfr
-#define T_MAILB		ns_t_mailb
-#define T_MAILA		ns_t_maila
-#define T_ANY		ns_t_any
-
-#define C_IN		ns_c_in
-#define C_CHAOS		ns_c_chaos
-#define C_HS		ns_c_hs
-/* BIND_UPDATE */
-#define C_NONE		ns_c_none
-#define C_ANY		ns_c_any
-
-#define	GETSHORT		NS_GET16
-#define	GETLONG			NS_GET32
-#define	PUTSHORT		NS_PUT16
-#define	PUTLONG			NS_PUT32
-
-#endif /* _ARPA_NAMESER_COMPAT_ */
diff --git a/newlib/libc/sys/linux/include/arpa/telnet.h b/newlib/libc/sys/linux/include/arpa/telnet.h
deleted file mode 100644
index 70e7ea822..000000000
--- a/newlib/libc/sys/linux/include/arpa/telnet.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)telnet.h	8.2 (Berkeley) 12/15/93
- * $FreeBSD: src/include/arpa/telnet.h,v 1.8 2001/12/03 12:41:18 markm Exp $
- */
-
-#ifndef _ARPA_TELNET_H_
-#define	_ARPA_TELNET_H_
-
-/*
- * Definitions for the TELNET protocol.
- */
-#define	IAC	255		/* interpret as command: */
-#define	DONT	254		/* you are not to use option */
-#define	DO	253		/* please, you use option */
-#define	WONT	252		/* I won't use option */
-#define	WILL	251		/* I will use option */
-#define	SB	250		/* interpret as subnegotiation */
-#define	GA	249		/* you may reverse the line */
-#define	EL	248		/* erase the current line */
-#define	EC	247		/* erase the current character */
-#define	AYT	246		/* are you there */
-#define	AO	245		/* abort output--but let prog finish */
-#define	IP	244		/* interrupt process--permanently */
-#define	BREAK	243		/* break */
-#define	DM	242		/* data mark--for connect. cleaning */
-#define	NOP	241		/* nop */
-#define	SE	240		/* end sub negotiation */
-#define EOR     239             /* end of record (transparent mode) */
-#define	ABORT	238		/* Abort process */
-#define	SUSP	237		/* Suspend process */
-#define	xEOF	236		/* End of file: EOF is already used... */
-
-#define SYNCH	242		/* for telfunc calls */
-
-#ifdef TELCMDS
-const char *telcmds[] = {
-	"EOF", "SUSP", "ABORT", "EOR",
-	"SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
-	"EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC",
-	0
-};
-#else
-extern char *telcmds[];
-#endif
-
-#define	TELCMD_FIRST	xEOF
-#define	TELCMD_LAST	IAC
-#define	TELCMD_OK(x)	((unsigned int)(x) <= TELCMD_LAST && \
-			 (unsigned int)(x) >= TELCMD_FIRST)
-#define	TELCMD(x)	telcmds[(x)-TELCMD_FIRST]
-
-/* telnet options */
-#define TELOPT_BINARY	0	/* 8-bit data path */
-#define TELOPT_ECHO	1	/* echo */
-#define	TELOPT_RCP	2	/* prepare to reconnect */
-#define	TELOPT_SGA	3	/* suppress go ahead */
-#define	TELOPT_NAMS	4	/* approximate message size */
-#define	TELOPT_STATUS	5	/* give status */
-#define	TELOPT_TM	6	/* timing mark */
-#define	TELOPT_RCTE	7	/* remote controlled transmission and echo */
-#define TELOPT_NAOL 	8	/* negotiate about output line width */
-#define TELOPT_NAOP 	9	/* negotiate about output page size */
-#define TELOPT_NAOCRD	10	/* negotiate about CR disposition */
-#define TELOPT_NAOHTS	11	/* negotiate about horizontal tabstops */
-#define TELOPT_NAOHTD	12	/* negotiate about horizontal tab disposition */
-#define TELOPT_NAOFFD	13	/* negotiate about formfeed disposition */
-#define TELOPT_NAOVTS	14	/* negotiate about vertical tab stops */
-#define TELOPT_NAOVTD	15	/* negotiate about vertical tab disposition */
-#define TELOPT_NAOLFD	16	/* negotiate about output LF disposition */
-#define TELOPT_XASCII	17	/* extended ascic character set */
-#define	TELOPT_LOGOUT	18	/* force logout */
-#define	TELOPT_BM	19	/* byte macro */
-#define	TELOPT_DET	20	/* data entry terminal */
-#define	TELOPT_SUPDUP	21	/* supdup protocol */
-#define	TELOPT_SUPDUPOUTPUT 22	/* supdup output */
-#define	TELOPT_SNDLOC	23	/* send location */
-#define	TELOPT_TTYPE	24	/* terminal type */
-#define	TELOPT_EOR	25	/* end or record */
-#define	TELOPT_TUID	26	/* TACACS user identification */
-#define	TELOPT_OUTMRK	27	/* output marking */
-#define	TELOPT_TTYLOC	28	/* terminal location number */
-#define	TELOPT_3270REGIME 29	/* 3270 regime */
-#define	TELOPT_X3PAD	30	/* X.3 PAD */
-#define	TELOPT_NAWS	31	/* window size */
-#define	TELOPT_TSPEED	32	/* terminal speed */
-#define	TELOPT_LFLOW	33	/* remote flow control */
-#define TELOPT_LINEMODE	34	/* Linemode option */
-#define TELOPT_XDISPLOC	35	/* X Display Location */
-#define TELOPT_OLD_ENVIRON 36	/* Old - Environment variables */
-#define	TELOPT_AUTHENTICATION 37/* Authenticate */
-#define	TELOPT_ENCRYPT	38	/* Encryption option */
-#define TELOPT_NEW_ENVIRON 39	/* New - Environment variables */
-#define	TELOPT_EXOPL	255	/* extended-options-list */
-
-
-#define	NTELOPTS	(1+TELOPT_NEW_ENVIRON)
-#ifdef TELOPTS
-const char *telopts[NTELOPTS+1] = {
-	"BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
-	"STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",
-	"NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS",
-	"NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO",
-	"DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT",
-	"SEND LOCATION", "TERMINAL TYPE", "END OF RECORD",
-	"TACACS UID", "OUTPUT MARKING", "TTYLOC",
-	"3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW",
-	"LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION",
-	"ENCRYPT", "NEW-ENVIRON",
-	0
-};
-#define	TELOPT_FIRST	TELOPT_BINARY
-#define	TELOPT_LAST	TELOPT_NEW_ENVIRON
-#define	TELOPT_OK(x)	((unsigned int)(x) <= TELOPT_LAST)
-#define	TELOPT(x)	telopts[(x)-TELOPT_FIRST]
-#endif
-
-/* sub-option qualifiers */
-#define	TELQUAL_IS	0	/* option is... */
-#define	TELQUAL_SEND	1	/* send option */
-#define	TELQUAL_INFO	2	/* ENVIRON: informational version of IS */
-#define	TELQUAL_REPLY	2	/* AUTHENTICATION: client version of IS */
-#define	TELQUAL_NAME	3	/* AUTHENTICATION: client version of IS */
-
-#define	LFLOW_OFF		0	/* Disable remote flow control */
-#define	LFLOW_ON		1	/* Enable remote flow control */
-#define	LFLOW_RESTART_ANY	2	/* Restart output on any char */
-#define	LFLOW_RESTART_XON	3	/* Restart output only on XON */
-
-/*
- * LINEMODE suboptions
- */
-
-#define	LM_MODE		1
-#define	LM_FORWARDMASK	2
-#define	LM_SLC		3
-
-#define	MODE_EDIT	0x01
-#define	MODE_TRAPSIG	0x02
-#define	MODE_ACK	0x04
-#define MODE_SOFT_TAB	0x08
-#define MODE_LIT_ECHO	0x10
-
-#define	MODE_MASK	0x1f
-
-/* Not part of protocol, but needed to simplify things... */
-#define MODE_FLOW		0x0100
-#define MODE_ECHO		0x0200
-#define MODE_INBIN		0x0400
-#define MODE_OUTBIN		0x0800
-#define MODE_FORCE		0x1000
-
-#define	SLC_SYNCH	1
-#define	SLC_BRK		2
-#define	SLC_IP		3
-#define	SLC_AO		4
-#define	SLC_AYT		5
-#define	SLC_EOR		6
-#define	SLC_ABORT	7
-#define	SLC_EOF		8
-#define	SLC_SUSP	9
-#define	SLC_EC		10
-#define	SLC_EL		11
-#define	SLC_EW		12
-#define	SLC_RP		13
-#define	SLC_LNEXT	14
-#define	SLC_XON		15
-#define	SLC_XOFF	16
-#define	SLC_FORW1	17
-#define	SLC_FORW2	18
-#define SLC_MCL         19
-#define SLC_MCR         20
-#define SLC_MCWL        21
-#define SLC_MCWR        22
-#define SLC_MCBOL       23
-#define SLC_MCEOL       24
-#define SLC_INSRT       25
-#define SLC_OVER        26
-#define SLC_ECR         27
-#define SLC_EWR         28
-#define SLC_EBOL        29
-#define SLC_EEOL        30
-
-#define	NSLC		30
-
-/*
- * For backwards compatibility, we define SLC_NAMES to be the
- * list of names if SLC_NAMES is not defined.
- */
-#define	SLC_NAMELIST	"0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR",	\
-			"ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP",	\
-			"LNEXT", "XON", "XOFF", "FORW1", "FORW2",	\
-			"MCL", "MCR", "MCWL", "MCWR", "MCBOL",		\
-			"MCEOL", "INSRT", "OVER", "ECR", "EWR",		\
-			"EBOL", "EEOL",					\
-			0
-
-#ifdef	SLC_NAMES
-const char *slc_names[] = {
-	SLC_NAMELIST
-};
-#else
-extern char *slc_names[];
-#define	SLC_NAMES SLC_NAMELIST
-#endif
-
-#define	SLC_NAME_OK(x)	((unsigned int)(x) <= NSLC)
-#define SLC_NAME(x)	slc_names[x]
-
-#define	SLC_NOSUPPORT	0
-#define	SLC_CANTCHANGE	1
-#define	SLC_VARIABLE	2
-#define	SLC_DEFAULT	3
-#define	SLC_LEVELBITS	0x03
-
-#define	SLC_FUNC	0
-#define	SLC_FLAGS	1
-#define	SLC_VALUE	2
-
-#define	SLC_ACK		0x80
-#define	SLC_FLUSHIN	0x40
-#define	SLC_FLUSHOUT	0x20
-
-#define	OLD_ENV_VAR	1
-#define	OLD_ENV_VALUE	0
-#define	NEW_ENV_VAR	0
-#define	NEW_ENV_VALUE	1
-#define	ENV_ESC		2
-#define ENV_USERVAR	3
-
-/*
- * AUTHENTICATION suboptions
- */
-
-/*
- * Who is authenticating who ...
- */
-#define	AUTH_WHO_CLIENT		0	/* Client authenticating server */
-#define	AUTH_WHO_SERVER		1	/* Server authenticating client */
-#define	AUTH_WHO_MASK		1
-
-/*
- * amount of authentication done
- */
-#define	AUTH_HOW_ONE_WAY	0
-#define	AUTH_HOW_MUTUAL		2
-#define	AUTH_HOW_MASK		2
-
-#define	AUTHTYPE_NULL		0
-#define	AUTHTYPE_KERBEROS_V4	1
-#define	AUTHTYPE_KERBEROS_V5	2
-#define	AUTHTYPE_SPX		3
-#define	AUTHTYPE_MINK		4
-#define	AUTHTYPE_SRA		6
-#define	AUTHTYPE_CNT		7
-
-#define	AUTHTYPE_TEST		99
-
-#ifdef	AUTH_NAMES
-const char *authtype_names[] = {
-	"NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", NULL, "SRA",
-	0
-};
-#else
-extern char *authtype_names[];
-#endif
-
-#define	AUTHTYPE_NAME_OK(x)	((unsigned int)(x) < AUTHTYPE_CNT)
-#define	AUTHTYPE_NAME(x)	authtype_names[x]
-
-/*
- * ENCRYPTion suboptions
- */
-#define	ENCRYPT_IS		0	/* I pick encryption type ... */
-#define	ENCRYPT_SUPPORT		1	/* I support encryption types ... */
-#define	ENCRYPT_REPLY		2	/* Initial setup response */
-#define	ENCRYPT_START		3	/* Am starting to send encrypted */
-#define	ENCRYPT_END		4	/* Am ending encrypted */
-#define	ENCRYPT_REQSTART	5	/* Request you start encrypting */
-#define	ENCRYPT_REQEND		6	/* Request you end encrypting */
-#define	ENCRYPT_ENC_KEYID	7
-#define	ENCRYPT_DEC_KEYID	8
-#define	ENCRYPT_CNT		9
-
-#define	ENCTYPE_ANY		0
-#define	ENCTYPE_DES_CFB64	1
-#define	ENCTYPE_DES_OFB64	2
-#define	ENCTYPE_CNT		3
-
-#ifdef	ENCRYPT_NAMES
-const char *encrypt_names[] = {
-	"IS", "SUPPORT", "REPLY", "START", "END",
-	"REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID",
-	0
-};
-const char *enctype_names[] = {
-	"ANY", "DES_CFB64",  "DES_OFB64",
-	0
-};
-#else
-extern char *encrypt_names[];
-extern char *enctype_names[];
-#endif
-
-
-#define	ENCRYPT_NAME_OK(x)	((unsigned int)(x) < ENCRYPT_CNT)
-#define	ENCRYPT_NAME(x)		encrypt_names[x]
-
-#define	ENCTYPE_NAME_OK(x)	((unsigned int)(x) < ENCTYPE_CNT)
-#define	ENCTYPE_NAME(x)		enctype_names[x]
-
-#endif /* !_TELNET_H_ */
diff --git a/newlib/libc/sys/linux/include/arpa/tftp.h b/newlib/libc/sys/linux/include/arpa/tftp.h
deleted file mode 100644
index 1de4dd48a..000000000
--- a/newlib/libc/sys/linux/include/arpa/tftp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tftp.h	8.1 (Berkeley) 6/2/93
- * $FreeBSD: src/include/arpa/tftp.h,v 1.5 2001/09/27 20:50:14 obrien Exp $
- */
-
-#ifndef _ARPA_TFTP_H_
-#define	_ARPA_TFTP_H_
-
-/*
- * Trivial File Transfer Protocol (IEN-133)
- */
-#define	SEGSIZE		512		/* data segment size */
-
-/*
- * Packet types.
- */
-#define	RRQ	01			/* read request */
-#define	WRQ	02			/* write request */
-#define	DATA	03			/* data packet */
-#define	ACK	04			/* acknowledgement */
-#define	ERROR	05			/* error code */
-#define	OACK	06			/* option acknowledgement */
-
-struct tftphdr {
-	unsigned short	th_opcode;		/* packet type */
-	union {
-		unsigned short	tu_block;	/* block # */
-		unsigned short	tu_code;	/* error code */
-		char	tu_stuff[1];	/* request packet stuff */
-	} th_u;
-	char	th_data[1];		/* data or error string */
-};
-
-#define	th_block	th_u.tu_block
-#define	th_code		th_u.tu_code
-#define	th_stuff	th_u.tu_stuff
-#define	th_msg		th_data
-
-/*
- * Error codes.
- */
-#define	EUNDEF		0		/* not defined */
-#define	ENOTFOUND	1		/* file not found */
-#define	EACCESS		2		/* access violation */
-#define	ENOSPACE	3		/* disk full or allocation exceeded */
-#define	EBADOP		4		/* illegal TFTP operation */
-#define	EBADID		5		/* unknown transfer ID */
-#define	EEXISTS		6		/* file already exists */
-#define	ENOUSER		7		/* no such user */
-#define	EOPTNEG		8		/* option negotiation failed */
-
-#endif /* !_TFTP_H_ */
diff --git a/newlib/libc/sys/linux/include/bp-sym.h b/newlib/libc/sys/linux/include/bp-sym.h
deleted file mode 100644
index 249a4bd66..000000000
--- a/newlib/libc/sys/linux/include/bp-sym.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __BP_SYM_H__
-#define __BP_SYM_H__
-
-#define BP_SYM(NAME) NAME
-
-#endif
diff --git a/newlib/libc/sys/linux/include/cmathcalls.h b/newlib/libc/sys/linux/include/cmathcalls.h
deleted file mode 100644
index c680c6d8e..000000000
--- a/newlib/libc/sys/linux/include/cmathcalls.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* Prototype declarations for complex math functions;
-   helper file for <complex.h>.
-   Copyright (C) 1997, 1998, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* NOTE: Because of the special way this file is used by <complex.h>, this
-   file must NOT be protected from multiple inclusion as header files
-   usually are.
-
-   This file provides prototype declarations for the math functions.
-   Most functions are declared using the macro:
-
-   __MATHCALL (NAME, (ARGS...));
-
-   This means there is a function `NAME' returning `double' and a function
-   `NAMEf' returning `float'.  Each place `_Mdouble_' appears in the
-   prototype, that is actually `double' in the prototype for `NAME' and
-   `float' in the prototype for `NAMEf'.  Reentrant variant functions are
-   called `NAME_r' and `NAMEf_r'.
-
-   Functions returning other types like `int' are declared using the macro:
-
-   __MATHDECL (TYPE, NAME, (ARGS...));
-
-   This is just like __MATHCALL but for a function returning `TYPE'
-   instead of `_Mdouble_'.  In all of these cases, there is still
-   both a `NAME' and a `NAMEf' that takes `float' arguments.  */
-
-#ifndef _COMPLEX_H
-#error "Never use <bits/cmathcalls.h> directly; include <complex.h> instead."
-#endif
-
-#define _Mdouble_complex_ _Mdouble_ _Complex
-
-
-/* Trigonometric functions.  */
-
-/* Arc cosine of Z.  */
-__MATHCALL (cacos, (_Mdouble_complex_ __z));
-/* Arc sine of Z.  */
-__MATHCALL (casin, (_Mdouble_complex_ __z));
-/* Arc tangent of Z.  */
-__MATHCALL (catan, (_Mdouble_complex_ __z));
-
-/* Cosine of Z.  */
-__MATHCALL (ccos, (_Mdouble_complex_ __z));
-/* Sine of Z.  */
-__MATHCALL (csin, (_Mdouble_complex_ __z));
-/* Tangent of Z.  */
-__MATHCALL (ctan, (_Mdouble_complex_ __z));
-
-
-/* Hyperbolic functions.  */
-
-/* Hyperbolic arc cosine of Z.  */
-__MATHCALL (cacosh, (_Mdouble_complex_ __z));
-/* Hyperbolic arc sine of Z.  */
-__MATHCALL (casinh, (_Mdouble_complex_ __z));
-/* Hyperbolic arc tangent of Z.  */
-__MATHCALL (catanh, (_Mdouble_complex_ __z));
-
-/* Hyperbolic cosine of Z.  */
-__MATHCALL (ccosh, (_Mdouble_complex_ __z));
-/* Hyperbolic sine of Z.  */
-__MATHCALL (csinh, (_Mdouble_complex_ __z));
-/* Hyperbolic tangent of Z.  */
-__MATHCALL (ctanh, (_Mdouble_complex_ __z));
-
-
-/* Exponential and logarithmic functions.  */
-
-/* Exponential function of Z.  */
-__MATHCALL (cexp, (_Mdouble_complex_ __z));
-
-/* Natural logarithm of Z.  */
-__MATHCALL (clog, (_Mdouble_complex_ __z));
-
-#ifdef __USE_GNU
-/* The base 10 logarithm is not defined by the standard but to implement
-   the standard C++ library it is handy.  */
-__MATHCALL (clog10, (_Mdouble_complex_ __z));
-#endif
-
-/* Power functions.  */
-
-/* Return X to the Y power.  */
-__MATHCALL (cpow, (_Mdouble_complex_ __x, _Mdouble_complex_ __y));
-
-/* Return the square root of Z.  */
-__MATHCALL (csqrt, (_Mdouble_complex_ __z));
-
-
-/* Absolute value, conjugates, and projection.  */
-
-/* Absolute value of Z.  */
-__MATHDECL (_Mdouble_,cabs, (_Mdouble_complex_ __z));
-
-/* Argument value of Z.  */
-__MATHDECL (_Mdouble_,carg, (_Mdouble_complex_ __z));
-
-/* Complex conjugate of Z.  */
-__MATHCALL (conj, (_Mdouble_complex_ __z));
-
-/* Projection of Z onto the Riemann sphere.  */
-__MATHCALL (cproj, (_Mdouble_complex_ __z));
-
-
-/* Decomposing complex values.  */
-
-/* Imaginary part of Z.  */
-__MATHDECL (_Mdouble_,cimag, (_Mdouble_complex_ __z));
-
-/* Real part of Z.  */
-__MATHDECL (_Mdouble_,creal, (_Mdouble_complex_ __z));
-
-
-/* Now some optimized versions.  GCC has handy notations for these
-   functions.  Recent GCC handles these as builtin functions so does
-   not need inlines.  */
-#if defined __GNUC__ && !__GNUC_PREREQ (2, 97) && defined __OPTIMIZE__
-
-/* Imaginary part of Z.  */
-extern __inline _Mdouble_
-__MATH_PRECNAME(cimag) (_Mdouble_complex_ __z) __THROW
-{
-  return __imag__ __z;
-}
-
-/* Real part of Z.  */
-extern __inline _Mdouble_
-__MATH_PRECNAME(creal) (_Mdouble_complex_ __z) __THROW
-{
-  return __real__ __z;
-}
-
-/* Complex conjugate of Z.  */
-extern __inline _Mdouble_complex_
-__MATH_PRECNAME(conj) (_Mdouble_complex_ __z) __THROW
-{
-  return __extension__ ~__z;
-}
-
-#endif
diff --git a/newlib/libc/sys/linux/include/complex.h b/newlib/libc/sys/linux/include/complex.h
deleted file mode 100644
index daa465674..000000000
--- a/newlib/libc/sys/linux/include/complex.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/*
- *	ISO C99:  7.3 Complex arithmetic	<complex.h>
- */
-
-#ifndef _COMPLEX_H
-#define _COMPLEX_H	1
-
-#include <sys/types.h>
-#include <features.h>
-
-__BEGIN_DECLS
-
-#define __CONCAT(x,y) x ## y
-/* We might need to add support for more compilers here.  But since ISO
-   C99 is out hopefully all maintained compilers will soon provide the data
-   types `float complex' and `double complex'.  */
-#if __GNUC_PREREQ (2, 7) && !__GNUC_PREREQ (2, 97)
-# define _Complex __complex__
-#endif
-
-#define complex		_Complex
-
-/* Narrowest imaginary unit.  This depends on the floating-point
-   evaluation method.
-   XXX This probably has to go into a gcc related file.  */
-#define _Complex_I	(__extension__ 1.0iF)
-
-/* Another more descriptive name is `I'.
-   XXX Once we have the imaginary support switch this to _Imaginary_I.  */
-#undef I
-#define I _Complex_I
-
-/* The file <bits/cmathcalls.h> contains the prototypes for all the
-   actual math functions.  These macros are used for those prototypes,
-   so we can easily declare each function as both `name' and `__name',
-   and can declare the float versions `namef' and `__namef'.  */
-
-#define __MATHCALL(function, args)	\
-  __MATHDECL (_Mdouble_complex_,function, args)
-#define __MATHDECL(type, function, args) \
-  __MATHDECL_1(type, function, args); \
-  __MATHDECL_1(type, __CONCAT(__,function), args)
-#define __MATHDECL_1(type, function, args) \
-  extern type __MATH_PRECNAME(function) args __THROW
-
-#define _Mdouble_ 		double
-#define __MATH_PRECNAME(name)	name
-#include <cmathcalls.h>
-#undef	_Mdouble_
-#undef	__MATH_PRECNAME
-
-/* Now the float versions.  */
-#ifndef _Mfloat_
-# define _Mfloat_		float
-#endif
-#define _Mdouble_ 		_Mfloat_
-#ifdef __STDC__
-# define __MATH_PRECNAME(name)	name##f
-#else
-# define __MATH_PRECNAME(name)	name/**/f
-#endif
-#include <cmathcalls.h>
-#undef	_Mdouble_
-#undef	__MATH_PRECNAME
-
-#if 0
-/* And the long double versions.  It is non-critical to define them
-   here unconditionally since `long double' is required in ISO C99.  */
-#if __STDC__ - 0 || __GNUC__ - 0 && !defined __NO_LONG_DOUBLE_MATH
-# ifndef _Mlong_double_
-#  define _Mlong_double_	long double
-# endif
-# define _Mdouble_ 		_Mlong_double_
-# ifdef __STDC__
-#  define __MATH_PRECNAME(name)	name##l
-# else
-#  define __MATH_PRECNAME(name)	name/**/l
-# endif
-# include <cmathcalls.h>
-#endif
-#endif
-#undef	_Mdouble_
-#undef	__MATH_PRECNAME
-#undef	__MATHDECL_1
-#undef	__MATHDECL
-#undef	__MATHCALL
-
-__END_DECLS
-
-#endif /* complex.h */
diff --git a/newlib/libc/sys/linux/include/dl-hash.h b/newlib/libc/sys/linux/include/dl-hash.h
deleted file mode 100644
index e0f7a4944..000000000
--- a/newlib/libc/sys/linux/include/dl-hash.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Compute hash value for given string according to ELF standard.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _DL_HASH_H
-#define _DL_HASH_H	1
-
-
-/* This is the hashing function specified by the ELF ABI.  In the
-   first five operations no overflow is possible so we optimized it a
-   bit.  */
-static inline unsigned int
-_dl_elf_hash (const unsigned char *name)
-{
-  unsigned long int hash = 0;
-  if (*name != '\0')
-    {
-      hash = *name++;
-      if (*name != '\0')
-	{
-	  hash = (hash << 4) + *name++;
-	  if (*name != '\0')
-	    {
-	      hash = (hash << 4) + *name++;
-	      if (*name != '\0')
-		{
-		  hash = (hash << 4) + *name++;
-		  if (*name != '\0')
-		    {
-		      hash = (hash << 4) + *name++;
-		      while (*name != '\0')
-			{
-			  unsigned long int hi;
-			  hash = (hash << 4) + *name++;
-			  hi = hash & 0xf0000000;
-
-			  /* The algorithm specified in the ELF ABI is as
-			     follows:
-
-			     if (hi != 0)
-			       hash ^= hi >> 24;
-
-			     hash &= ~hi;
-
-			     But the following is equivalent and a lot
-			     faster, especially on modern processors.  */
-
-			  hash ^= hi;
-			  hash ^= hi >> 24;
-			}
-		    }
-		}
-	    }
-	}
-    }
-  return hash;
-}
-
-#endif /* dl-hash.h */
diff --git a/newlib/libc/sys/linux/include/dlfcn.h b/newlib/libc/sys/linux/include/dlfcn.h
deleted file mode 100644
index 75d7526b0..000000000
--- a/newlib/libc/sys/linux/include/dlfcn.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _DLFCN_H
-#include <dl/dlfcn.h>
-
-#define internal_function
-
-/* Internally used flag.  */
-#define __RTLD_DLOPEN	0x80000000
-#define __RTLD_SPROF	0x40000000
-
-/* Now define the internal interfaces.  */
-extern void *__dlvsym (void *__handle, __const char *__name,
-		       __const char *__version);
-
-extern void *__libc_dlopen  (__const char *__name);
-extern void *__libc_dlsym   (void *__map, __const char *__name);
-extern int   __libc_dlclose (void *__map);
-
-/* Locate shared object containing the given address.  */
-extern int _dl_addr (const void *address, Dl_info *info)
-     internal_function;
-
-/* Open the shared object NAME, relocate it, and run its initializer if it
-   hasn't already been run.  MODE is as for `dlopen' (see <dlfcn.h>).  If
-   the object is already opened, returns its existing map.  */
-extern void *_dl_open (const char *name, int mode, const void *caller)
-     internal_function;
-
-/* Close an object previously opened by _dl_open.  */
-extern void _dl_close (void *map)
-     internal_function;
-
-/* Look up NAME in shared object HANDLE (which may be RTLD_DEFAULT or
-   RTLD_NEXT).  WHO is the calling function, for RTLD_NEXT.  Returns
-   the symbol value, which may be NULL.  */
-extern void *_dl_sym (void *handle, const char *name, void *who)
-    internal_function;
-
-/* Look up version VERSION of symbol NAME in shared object HANDLE
-   (which may be RTLD_DEFAULT or RTLD_NEXT).  WHO is the calling
-   function, for RTLD_NEXT.  Returns the symbol value, which may be
-   NULL.  */
-extern void *_dl_vsym (void *handle, const char *name, const char *version,
-		       void *who)
-    internal_function;
-
-/* Call OPERATE, catching errors from `dl_signal_error'.  If there is no
-   error, *ERRSTRING is set to null.  If there is an error, *ERRSTRING is
-   set to a string constructed from the strings passed to _dl_signal_error,
-   and the error code passed is the return value and *OBJNAME is set to
-   the object name which experienced the problems.  ERRSTRING if nonzero
-   points to a malloc'ed string which the caller has to free after use.
-   ARGS is passed as argument to OPERATE.  */
-extern int _dl_catch_error (const char **objname, const char **errstring,
-			    void (*operate) (void *),
-			    void *args)
-     internal_function;
-
-/* Helper function for <dlfcn.h> functions.  Runs the OPERATE function via
-   _dl_catch_error.  Returns zero for success, nonzero for failure; and
-   arranges for `dlerror' to return the error details.
-   ARGS is passed as argument to OPERATE.  */
-extern int _dlerror_run (void (*operate) (void *), void *args)
-     internal_function;
-
-#endif
diff --git a/newlib/libc/sys/linux/include/fnmatch.h b/newlib/libc/sys/linux/include/fnmatch.h
deleted file mode 100644
index c038bf77f..000000000
--- a/newlib/libc/sys/linux/include/fnmatch.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/include/fnmatch.h,v 1.10 2002/03/23 17:24:53 imp Exp $
- *	@(#)fnmatch.h	8.1 (Berkeley) 6/2/93
- */
-
-#ifndef	_FNMATCH_H_
-#define	_FNMATCH_H_
-
-#define	FNM_NOMATCH	1	/* Match failed. */
-
-#define	FNM_NOESCAPE	0x01	/* Disable backslash escaping. */
-#define	FNM_PATHNAME	0x02	/* Slash must be matched by slash. */
-#define	FNM_PERIOD	0x04	/* Period must be matched by period. */
-
-#if defined(_GNU_SOURCE) || !defined(_ANSI_SOURCE) && !defined(_POSIX_SOURCE)
-#define	FNM_LEADING_DIR	0x08	/* Ignore /<tail> after Imatch. */
-#define	FNM_CASEFOLD	0x10	/* Case insensitive search. */
-#define	FNM_IGNORECASE	FNM_CASEFOLD
-#define	FNM_FILE_NAME	FNM_PATHNAME
-#endif
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-int	 fnmatch(const char *, const char *, int);
-__END_DECLS
-
-#endif /* !_FNMATCH_H_ */
diff --git a/newlib/libc/sys/linux/include/gconv.h b/newlib/libc/sys/linux/include/gconv.h
deleted file mode 100644
index 64df45bf5..000000000
--- a/newlib/libc/sys/linux/include/gconv.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This header provides no interface for a user to the internals of
-   the gconv implementation in the libc.  Therefore there is no use
-   for these definitions beside for writing additional gconv modules.  */
-
-#ifndef _GCONV_H
-#define _GCONV_H	1
-
-#include <features.h>
-#define __need_mbstate_t
-#include <wchar.h>
-#define __need_size_t
-#define __need_wchar_t
-#include <stddef.h>
-
-/* ISO 10646 value used to signal invalid value.  */
-#define __UNKNOWN_10646_CHAR	((wchar_t) 0xfffd)
-
-/* Error codes for gconv functions.  */
-enum
-{
-  __GCONV_OK = 0,
-  __GCONV_NOCONV,
-  __GCONV_NODB,
-  __GCONV_NOMEM,
-
-  __GCONV_EMPTY_INPUT,
-  __GCONV_FULL_OUTPUT,
-  __GCONV_ILLEGAL_INPUT,
-  __GCONV_INCOMPLETE_INPUT,
-
-  __GCONV_ILLEGAL_DESCRIPTOR,
-  __GCONV_INTERNAL_ERROR
-};
-
-
-/* Flags the `__gconv_open' function can set.  */
-enum
-{
-  __GCONV_IS_LAST = 0x0001,
-  __GCONV_IGNORE_ERRORS = 0x0002
-};
-
-
-/* Forward declarations.  */
-struct __gconv_step;
-struct __gconv_step_data;
-struct __gconv_loaded_object;
-struct __gconv_trans_data;
-
-
-/* Type of a conversion function.  */
-typedef int (*__gconv_fct) (struct __gconv_step *, struct __gconv_step_data *,
-			    __const unsigned char **, __const unsigned char *,
-			    unsigned char **, size_t *, int, int);
-
-/* Constructor and destructor for local data for conversion step.  */
-typedef int (*__gconv_init_fct) (struct __gconv_step *);
-typedef void (*__gconv_end_fct) (struct __gconv_step *);
-
-
-/* Type of a transliteration/transscription function.  */
-typedef int (*__gconv_trans_fct) (struct __gconv_step *,
-				  struct __gconv_step_data *, void *,
-				  __const unsigned char *,
-				  __const unsigned char **,
-				  __const unsigned char *, unsigned char **,
-				  size_t *);
-
-/* Function to call to provide transliteration module with context.  */
-typedef int (*__gconv_trans_context_fct) (void *, __const unsigned char *,
-					  __const unsigned char *,
-					  unsigned char *, unsigned char *);
-
-/* Function to query module about supported encoded character sets.  */
-typedef int (*__gconv_trans_query_fct) (__const char *, __const char ***,
-					size_t *);
-
-/* Constructor and destructor for local data for transliteration.  */
-typedef int (*__gconv_trans_init_fct) (void **, const char *);
-typedef void (*__gconv_trans_end_fct) (void *);
-
-struct __gconv_trans_data
-{
-  /* Transliteration/Transscription function.  */
-  __gconv_trans_fct __trans_fct;
-  __gconv_trans_context_fct __trans_context_fct;
-  __gconv_trans_end_fct __trans_end_fct;
-  void *__data;
-  struct __gconv_trans_data *__next;
-};
-
-
-/* Description of a conversion step.  */
-struct __gconv_step
-{
-  struct __gconv_loaded_object *__shlib_handle;
-  __const char *__modname;
-
-  int __counter;
-
-  char *__from_name;
-  char *__to_name;
-
-  __gconv_fct __fct;
-  __gconv_init_fct __init_fct;
-  __gconv_end_fct __end_fct;
-
-  /* Information about the number of bytes needed or produced in this
-     step.  This helps optimizing the buffer sizes.  */
-  int __min_needed_from;
-  int __max_needed_from;
-  int __min_needed_to;
-  int __max_needed_to;
-
-  /* Flag whether this is a stateful encoding or not.  */
-  int __stateful;
-
-  void *__data;		/* Pointer to step-local data.  */
-};
-
-/* Additional data for steps in use of conversion descriptor.  This is
-   allocated by the `init' function.  */
-struct __gconv_step_data
-{
-  unsigned char *__outbuf;    /* Output buffer for this step.  */
-  unsigned char *__outbufend; /* Address of first byte after the output
-				 buffer.  */
-
-  /* Is this the last module in the chain.  */
-  int __flags;
-
-  /* Counter for number of invocations of the module function for this
-     descriptor.  */
-  int __invocation_counter;
-
-  /* Flag whether this is an internal use of the module (in the mb*towc*
-     and wc*tomb* functions) or regular with iconv(3).  */
-  int __internal_use;
-
-  mbstate_t *__statep;
-  mbstate_t __state;	/* This element must not be used directly by
-			   any module; always use STATEP!  */
-
-  /* Transliteration information.  */
-  struct __gconv_trans_data *__trans;
-};
-
-
-/* Combine conversion step description with data.  */
-typedef struct __gconv_info
-{
-  size_t __nsteps;
-  struct __gconv_step *__steps;
-  __extension__ struct __gconv_step_data __data __flexarr;
-} *__gconv_t;
-
-#endif /* gconv.h */
diff --git a/newlib/libc/sys/linux/include/getopt.h b/newlib/libc/sys/linux/include/getopt.h
deleted file mode 100644
index 994f86001..000000000
--- a/newlib/libc/sys/linux/include/getopt.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* libc/sys/linux/include/getopt.h - Extended command line parsing */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _NEWLIB_GETOPT_H
-#define _NEWLIB_GETOPT_H
-
-#include <unistd.h>
-
-
-enum { no_argument, required_argument, optional_argument };
-
-struct option {
-    const char *name;
-    int has_arg;
-    int *flag;
-    int val;
-};
-
-int getopt_long(int argc,char *const argv[],const char *optstring,
-  const struct option *longopts,int *longindex);
-
-int getopt_long_only(int argc,char *const argv[],const char *optstring,
-  const struct option *longopts,int *longindex);
-
-#endif
diff --git a/newlib/libc/sys/linux/include/glob.h b/newlib/libc/sys/linux/include/glob.h
deleted file mode 100644
index 6e038476d..000000000
--- a/newlib/libc/sys/linux/include/glob.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Guido van Rossum.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)glob.h	8.1 (Berkeley) 6/2/93
- * $FreeBSD: src/include/glob.h,v 1.6 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef _GLOB_H_
-#define	_GLOB_H_
-
-#include <sys/cdefs.h>
-
-struct stat;
-typedef struct {
-	int gl_pathc;		/* Count of total paths so far. */
-	int gl_matchc;		/* Count of paths matching pattern. */
-	int gl_offs;		/* Reserved at beginning of gl_pathv. */
-	int gl_flags;		/* Copy of flags parameter to glob. */
-	char **gl_pathv;	/* List of paths matching pattern. */
-				/* Copy of errfunc parameter to glob. */
-	int (*gl_errfunc)(const char *, int);
-
-	/*
-	 * Alternate filesystem access methods for glob; replacement
-	 * versions of closedir(3), readdir(3), opendir(3), stat(2)
-	 * and lstat(2).
-	 */
-	void (*gl_closedir)(void *);
-	struct dirent *(*gl_readdir)(void *);
-	void *(*gl_opendir)(const char *);
-	int (*gl_lstat)(const char *, struct stat *);
-	int (*gl_stat)(const char *, struct stat *);
-} glob_t;
-
-#define	GLOB_APPEND	0x0001	/* Append to output from previous call. */
-#define	GLOB_DOOFFS	0x0002	/* Use gl_offs. */
-#define	GLOB_ERR	0x0004	/* Return on error. */
-#define	GLOB_MARK	0x0008	/* Append / to matching directories. */
-#define	GLOB_NOCHECK	0x0010	/* Return pattern itself if nothing matches. */
-#define	GLOB_NOSORT	0x0020	/* Don't sort. */
-
-#define	GLOB_ALTDIRFUNC	0x0040	/* Use alternately specified directory funcs. */
-#define	GLOB_BRACE	0x0080	/* Expand braces ala csh. */
-#define	GLOB_MAGCHAR	0x0100	/* Pattern had globbing characters. */
-#define	GLOB_NOMAGIC	0x0200	/* GLOB_NOCHECK without magic chars (csh). */
-#define	GLOB_QUOTE	0x0400	/* Quote special chars with \. */
-#define	GLOB_TILDE	0x0800	/* Expand tilde names from the passwd file. */
-#define	GLOB_LIMIT	0x1000	/* limit number of returned paths */
-
-/* backwards compatibility, this is the old name for this option */
-#define GLOB_MAXPATH	GLOB_LIMIT
-
-#define	GLOB_NOSPACE	(-1)	/* Malloc call failed. */
-#define	GLOB_ABEND	(-2)	/* Unignored error. */
-
-__BEGIN_DECLS
-int	glob(const char *, int, int (*)(const char *, int), glob_t *);
-void	globfree(glob_t *);
-__END_DECLS
-
-#endif /* !_GLOB_H_ */
diff --git a/newlib/libc/sys/linux/include/hesiod.h b/newlib/libc/sys/linux/include/hesiod.h
deleted file mode 100644
index c7dbeee33..000000000
--- a/newlib/libc/sys/linux/include/hesiod.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*	$NetBSD: hesiod.h,v 1.3 1999/01/24 23:53:18 lukem Exp $	*/
-/*	$FreeBSD: src/include/hesiod.h,v 1.2 2002/03/23 17:24:53 imp Exp $ */
-
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#ifndef _HESIOD_H_
-#define _HESIOD_H_
-
-	/* Application-visible indication that we have the new interfaces */
-
-#define HESIOD_INTERFACES
-
-	/* Configuration information. */
-
-#ifndef _PATH_HESIOD_CONF			/* Configuration file. */
-#define _PATH_HESIOD_CONF	"/etc/hesiod.conf"
-#endif
-
-#define DEF_RHS		""			/* Defaults if HESIOD_CONF */
-#define DEF_LHS		""			/*    file is not present. */
-
-	/* Error codes (for backwards compatibility) */
-
-#define	HES_ER_UNINIT	-1	/* uninitialized */
-#define	HES_ER_OK	0	/* no error */
-#define	HES_ER_NOTFOUND	1	/* Hesiod name not found by server */
-#define HES_ER_CONFIG	2	/* local problem (no config file?) */
-#define HES_ER_NET	3	/* network problem */
-
-	/* Declaration of routines */
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-int	hesiod_init(void **);
-char  **hesiod_resolve(void *, const char *, const char *);
-void	hesiod_free_list(void *, char **);
-char   *hesiod_to_bind(void *, const char *, const char *);
-void	hesiod_end(void *);
-
-				/* backwards compatibility */
-int	hes_init(void);
-char   *hes_to_bind(const char *, const char *);
-char  **hes_resolve(const char *, const char *);
-int	hes_error(void);
-void	hes_free(char **);
-__END_DECLS
-
-#endif /* ! _HESIOD_H_ */
diff --git a/newlib/libc/sys/linux/include/ifaddrs.h b/newlib/libc/sys/linux/include/ifaddrs.h
deleted file mode 100644
index aad6c6839..000000000
--- a/newlib/libc/sys/linux/include/ifaddrs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*	$FreeBSD: src/include/ifaddrs.h,v 1.2 2002/03/23 17:24:53 imp Exp $	*/
-
-/*
- * Copyright (c) 1995, 1999
- *	Berkeley Software Design, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	BSDI ifaddrs.h,v 2.5 2000/02/23 14:51:59 dab Exp
- */
-
-#ifndef	_IFADDRS_H_
-#define	_IFADDRS_H_
-
-struct ifaddrs {
-	struct ifaddrs  *ifa_next;
-	char		*ifa_name;
-	u_int		 ifa_flags;
-	struct sockaddr	*ifa_addr;
-	struct sockaddr	*ifa_netmask;
-	struct sockaddr	*ifa_dstaddr;
-	void		*ifa_data;
-};
-
-/*
- * This may have been defined in <net/if.h>.  Note that if <net/if.h> is
- * to be included it must be included before this header file.
- */
-#ifndef	ifa_broadaddr
-#define	ifa_broadaddr	ifa_dstaddr	/* broadcast address interface */
-#endif
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-extern int getifaddrs(struct ifaddrs **);
-extern void freeifaddrs(struct ifaddrs *);
-__END_DECLS
-
-#endif
diff --git a/newlib/libc/sys/linux/include/libc_private.h b/newlib/libc/sys/linux/include/libc_private.h
deleted file mode 100644
index af7df8c8b..000000000
--- a/newlib/libc/sys/linux/include/libc_private.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 1998 John Birrell <jb@cimlogic.com.au>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by John Birrell.
- * 4. Neither the name of the author nor the names of any co-contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY JOHN BIRRELL AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/include/libc_private.h,v 1.5 2002/03/29 22:43:42 markm Exp $
- *
- * Private definitions for libc, libc_r and libpthread.
- *
- */
-
-#ifndef _LIBC_PRIVATE_H_
-#define _LIBC_PRIVATE_H_
-
-/*
- * This global flag is non-zero when a process has created one
- * or more threads. It is used to avoid calling locking functions
- * when they are not required.
- */
-extern int	__isthreaded;
-
-/*
- * File lock contention is difficult to diagnose without knowing
- * where locks were set. Allow a debug library to be built which
- * records the source file and line number of each lock call.
- */
-#ifdef	_FLOCK_DEBUG
-#define _FLOCKFILE(x)	_flockfile_debug(x, __FILE__, __LINE__)
-#else
-#define _FLOCKFILE(x)	_flockfile(x)
-#endif
-
-/*
- * Macros for locking and unlocking FILEs. These test if the
- * process is threaded to avoid locking when not required.
- */
-#define	FLOCKFILE(fp)		if (__isthreaded) _FLOCKFILE(fp)
-#define	FUNLOCKFILE(fp)		if (__isthreaded) _funlockfile(fp)
-
-/*
- * This is a pointer in the C run-time startup code. It is used
- * by getprogname() and setprogname().
- */
-extern const char *__progname;
-
-#endif /* _LIBC_PRIVATE_H_ */
diff --git a/newlib/libc/sys/linux/include/limits.h b/newlib/libc/sys/linux/include/limits.h
deleted file mode 100644
index 45cd6f253..000000000
--- a/newlib/libc/sys/linux/include/limits.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* Copyright (C) 1991, 92, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/*
- *	ISO C99 Standard: 7.10/5.2.4.2.1 Sizes of integer types	<limits.h>
- */
-
-#ifndef _LIBC_LIMITS_H_
-#define _LIBC_LIMITS_H_	1
-
-#include <features.h>
-
-
-/* Maximum length of any multibyte character in any locale.
-   We define this value here since the gcc header does not define
-   the correct value.  */
-#define MB_LEN_MAX	16
-
-
-/* If we are not using GNU CC we have to define all the symbols ourself.
-   Otherwise use gcc's definitions (see below).  */
-#if !defined __GNUC__ || __GNUC__ < 2
-
-/* We only protect from multiple inclusion here, because all the other
-   #include's protect themselves, and in GCC 2 we may #include_next through
-   multiple copies of this file before we get to GCC's.  */
-# ifndef _LIMITS_H
-#  define _LIMITS_H	1
-
-#include <bits/wordsize.h>
-
-/* We don't have #include_next.
-   Define ANSI <limits.h> for standard 32-bit words.  */
-
-/* These assume 8-bit `char's, 16-bit `short int's,
-   and 32-bit `int's and `long int's.  */
-
-/* Number of bits in a `char'.	*/
-#  define CHAR_BIT	8
-
-/* Minimum and maximum values a `signed char' can hold.  */
-#  define SCHAR_MIN	(-128)
-#  define SCHAR_MAX	127
-
-/* Maximum value an `unsigned char' can hold.  (Minimum is 0.)  */
-#  define UCHAR_MAX	255
-
-/* Minimum and maximum values a `char' can hold.  */
-#  ifdef __CHAR_UNSIGNED__
-#   define CHAR_MIN	0
-#   define CHAR_MAX	UCHAR_MAX
-#  else
-#   define CHAR_MIN	SCHAR_MIN
-#   define CHAR_MAX	SCHAR_MAX
-#  endif
-
-/* Minimum and maximum values a `signed short int' can hold.  */
-#  define SHRT_MIN	(-32768)
-#  define SHRT_MAX	32767
-
-/* Maximum value an `unsigned short int' can hold.  (Minimum is 0.)  */
-#  define USHRT_MAX	65535
-
-/* Minimum and maximum values a `signed int' can hold.  */
-#  define INT_MIN	(-INT_MAX - 1)
-#  define INT_MAX	2147483647
-
-/* Maximum value an `unsigned int' can hold.  (Minimum is 0.)  */
-#  define UINT_MAX	4294967295U
-
-/* Minimum and maximum values a `signed long int' can hold.  */
-#  if __WORDSIZE == 64
-#   define LONG_MAX	9223372036854775807L
-#  else
-#   define LONG_MAX	2147483647L
-#  endif
-#  define LONG_MIN	(-LONG_MAX - 1L)
-
-/* Maximum value an `unsigned long int' can hold.  (Minimum is 0.)  */
-#  if __WORDSIZE == 64
-#   define ULONG_MAX	18446744073709551615UL
-#  else
-#   define ULONG_MAX	4294967295UL
-#  endif
-
-#  ifdef __USE_ISOC99
-
-/* Minimum and maximum values a `signed long long int' can hold.  */
-#   define LLONG_MAX	9223372036854775807LL
-#   define LLONG_MIN	(-LLONG_MAX - 1LL)
-
-/* Maximum value an `unsigned long long int' can hold.  (Minimum is 0.)  */
-#   define ULLONG_MAX	18446744073709551615ULL
-
-#  endif /* ISO C99 */
-
-# endif	/* limits.h  */
-#endif	/* GCC 2.  */
-
-#endif	/* !_LIBC_LIMITS_H_ */
-
- /* Get the compiler's limits.h, which defines almost all the ISO constants.
-
-    We put this #include_next outside the double inclusion check because
-    it should be possible to include this file more than once and still get
-    the definitions from gcc's header.  */
-#if defined __GNUC__ && !defined _GCC_LIMITS_H_
-/* `_GCC_LIMITS_H_' is what GCC's file defines.  */
-# include_next <limits.h>
-
-/* The <limits.h> files in some gcc versions don't define LLONG_MIN,
-   LLONG_MAX, and ULLONG_MAX.  Instead only the values gcc defined for
-   ages are available.  */
-# ifdef __USE_ISOC99
-#  ifndef LLONG_MIN
-#   define LLONG_MIN	LONG_LONG_MIN
-#  endif
-#  ifndef LLONG_MAX
-#   define LLONG_MAX	LONG_LONG_MAX
-#  endif
-#  ifndef ULLONG_MAX
-#   define ULLONG_MAX	ULONG_LONG_MAX
-#  endif
-# endif
-#endif
-
-#ifdef	__USE_POSIX
-/* POSIX adds things to <limits.h>.  */
-# include <bits/posix1_lim.h>
-#endif
-
-#ifdef	__USE_POSIX2
-# include <bits/posix2_lim.h>
-#endif
-
-#ifdef	__USE_XOPEN
-# include <bits/xopen_lim.h>
-#endif
diff --git a/newlib/libc/sys/linux/include/link.h b/newlib/libc/sys/linux/include/link.h
deleted file mode 100644
index 424fb2952..000000000
--- a/newlib/libc/sys/linux/include/link.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/* Data structure for communication from the run-time dynamic linker for
-   loaded ELF shared objects.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef	_LINK_H
-#define	_LINK_H	1
-
-#include <features.h>
-#include <elf.h>
-#include <dlfcn.h>
-#include <sys/types.h>
-
-#define DT_THISPROCNUM 0
-/* We use this macro to refer to ELF types independent of the native wordsize.
-   `ElfW(TYPE)' is used in place of `Elf32_TYPE' or `Elf64_TYPE'.  */
-#define ElfW(type)	_ElfW (Elf, __ELF_NATIVE_CLASS, type)
-#define _ElfW(e,w,t)	_ElfW_1 (e, w, _##t)
-#define _ElfW_1(e,w,t)	e##w##t
-
-#include <sys/elfclass.h>		/* Defines __ELF_NATIVE_CLASS.  */
-#include <sys/link.h>
-#include <dl-lookupcfg.h>
-
-/* Rendezvous structure used by the run-time dynamic linker to communicate
-   details of shared object loading to the debugger.  If the executable's
-   dynamic section has a DT_DEBUG element, the run-time linker sets that
-   element's value to the address where this structure can be found.  */
-
-struct r_debug
-  {
-    int r_version;		/* Version number for this protocol.  */
-
-    struct link_map *r_map;	/* Head of the chain of loaded objects.  */
-
-    /* This is the address of a function internal to the run-time linker,
-       that will always be called when the linker begins to map in a
-       library or unmap it, and again when the mapping change is complete.
-       The debugger can set a breakpoint at this address if it wants to
-       notice shared object mapping changes.  */
-    ElfW(Addr) r_brk;
-    enum
-      {
-	/* This state value describes the mapping change taking place when
-	   the `r_brk' address is called.  */
-	RT_CONSISTENT,		/* Mapping change is complete.  */
-	RT_ADD,			/* Beginning to add a new object.  */
-	RT_DELETE		/* Beginning to remove an object mapping.  */
-      } r_state;
-
-    ElfW(Addr) r_ldbase;	/* Base address the linker is loaded at.  */
-  };
-
-/* This is the instance of that structure used by the dynamic linker.  */
-extern struct r_debug _r_debug;
-
-/* This symbol refers to the "dynamic structure" in the `.dynamic' section
-   of whatever module refers to `_DYNAMIC'.  So, to find its own
-   `struct r_debug', a program could do:
-     for (dyn = _DYNAMIC; dyn->d_tag != DT_NULL; ++dyn)
-       if (dyn->d_tag == DT_DEBUG)
-	 r_debug = (struct r_debug *) dyn->d_un.d_ptr;
-   */
-extern ElfW(Dyn) _DYNAMIC[];
-
-
-/* Some internal data structures of the dynamic linker used in the
-   linker map.  We only provide forward declarations.  */
-struct libname_list;
-struct r_found_version;
-struct r_search_path_elem;
-
-/* Forward declaration.  */
-struct link_map;
-
-/* Structure to describe a single list of scope elements.  The lookup
-   functions get passed an array of pointers to such structures.  */
-struct r_scope_elem
-{
-  /* Array of maps for the scope.  */
-  struct link_map **r_list;
-  /* Number of entries in the scope.  */
-  unsigned int r_nlist;
-};
-
-
-/* Structure to record search path and allocation mechanism.  */
-struct r_search_path_struct
-  {
-    struct r_search_path_elem **dirs;
-    int malloced;
-  };
-
-
-/* Structure describing a loaded shared object.  The `l_next' and `l_prev'
-   members form a chain of all the shared objects loaded at startup.
-
-   These data structures exist in space used by the run-time dynamic linker;
-   modifying them may have disastrous results.
-
-   This data structure might change in future, if necessary.  User-level
-   programs must avoid defining objects of this type.  */
-
-struct link_map
-  {
-    /* These first few members are part of the protocol with the debugger.
-       This is the same format used in SVR4.  */
-
-    ElfW(Addr) l_addr;		/* Base address shared object is loaded at.  */
-    char *l_name;		/* Absolute file name object was found in.  */
-    ElfW(Dyn) *l_ld;		/* Dynamic section of the shared object.  */
-    struct link_map *l_next, *l_prev; /* Chain of loaded objects.  */
-
-    /* All following members are internal to the dynamic linker.
-       They may change without notice.  */
-
-    struct libname_list *l_libname;
-    /* Indexed pointers to dynamic section.
-       [0,DT_NUM) are indexed by the processor-independent tags.
-       [DT_NUM,DT_NUM+DT_THISPROCNUM) are indexed by the tag minus DT_LOPROC.
-       [DT_NUM+DT_THISPROCNUM,DT_NUM+DT_THISPROCNUM+DT_EXTRANUM) are indexed
-       by DT_EXTRATAGIDX(tagvalue) and
-       [DT_NUM+DT_THISPROCNUM+DT_VERSIONTAGNUM,
-        DT_NUM+DT_THISPROCNUM+DT_VERSIONTAGNUM+DT_EXTRANUM)
-       are indexed by DT_EXTRATAGIDX(tagvalue) (see <elf.h>).  */
-
-    ElfW(Dyn) *l_info[DT_NUM + DT_THISPROCNUM + DT_VERSIONTAGNUM
-		     + DT_EXTRANUM];
-    const ElfW(Phdr) *l_phdr;	/* Pointer to program header table in core.  */
-    ElfW(Addr) l_entry;		/* Entry point location.  */
-    ElfW(Half) l_phnum;		/* Number of program header entries.  */
-    ElfW(Half) l_ldnum;	/* Number of dynamic segment entries.  */
-
-    /* Array of DT_NEEDED dependencies and their dependencies, in
-       dependency order for symbol lookup (with and without
-       duplicates).  There is no entry before the dependencies have
-       been loaded.  */
-    struct r_scope_elem l_searchlist;
-
-    /* We need a special searchlist to process objects marked with
-       DT_SYMBOLIC.  */
-    struct r_scope_elem l_symbolic_searchlist;
-
-    /* Dependent object that first caused this object to be loaded.  */
-    struct link_map *l_loader;
-
-    /* Symbol hash table.  */
-    Elf_Symndx l_nbuckets;
-    const Elf_Symndx *l_buckets, *l_chain;
-
-    unsigned int l_opencount;	/* Reference count for dlopen/dlclose.  */
-    enum			/* Where this object came from.  */
-      {
-	lt_executable,		/* The main executable program.  */
-	lt_library,		/* Library needed by main executable.  */
-	lt_loaded		/* Extra run-time loaded shared object.  */
-      } l_type:2;
-    unsigned int l_relocated:1;	/* Nonzero if object's relocations done.  */
-    unsigned int l_init_called:1; /* Nonzero if DT_INIT function called.  */
-    unsigned int l_global:1;	/* Nonzero if object in _dl_global_scope.  */
-    unsigned int l_reserved:2;	/* Reserved for internal use.  */
-    unsigned int l_phdr_allocated:1; /* Nonzero if the data structure pointed
-					to by `l_phdr' is allocated.  */
-    unsigned int l_soname_added:1; /* Nonzero if the SONAME is for sure in
-				      the l_libname list.  */
-    unsigned int l_faked:1;	/* Nonzero if this is a faked descriptor
-				   without associated file.  */
-
-    /* Array with version names.  */
-    unsigned int l_nversions;
-    struct r_found_version *l_versions;
-
-    /* Collected information about own RPATH directories.  */
-    struct r_search_path_struct l_rpath_dirs;
-
-    /* Collected results of relocation while profiling.  */
-    ElfW(Addr) *l_reloc_result;
-
-    /* Pointer to the version information if available.  */
-    ElfW(Versym) *l_versyms;
-
-    /* String specifying the path where this object was found.  */
-    const char *l_origin;
-
-    /* Start and finish of memory map for this object.  l_map_start
-       need not be the same as l_addr.  */
-    ElfW(Addr) l_map_start, l_map_end;
-
-    /* Default array for 'l_scope'.  */
-    struct r_scope_elem *l_scope_mem[4];
-    /* Size of array allocated for 'l_scope'.  */
-    size_t l_scope_max;
-    /* This is an array defining the lookup scope for this link map.
-       There are at most three different scope lists.  */
-    struct r_scope_elem **l_scope;
-
-    /* A similar array, this time only with the local scope.  This is
-       used occasionally.  */
-    struct r_scope_elem *l_local_scope[2];
-
-    /* This information is kept to check for sure whether a shared
-       object is the same as one already loaded.  */
-    dev_t l_dev;
-    ino64_t l_ino;
-
-    /* Collected information about own RUNPATH directories.  */
-    struct r_search_path_struct l_runpath_dirs;
-
-    /* List of object in order of the init and fini calls.  */
-    struct link_map **l_initfini;
-
-    /* List of the dependencies introduced through symbol binding.  */
-    unsigned int l_reldepsmax;
-    unsigned int l_reldepsact;
-    struct link_map **l_reldeps;
-
-    /* Various flag words.  */
-    ElfW(Word) l_feature_1;
-    ElfW(Word) l_flags_1;
-
-    /* Temporarily used in `dl_close'.  */
-    unsigned int l_idx;
-
-    struct link_map_machine l_mach;
-
-    struct
-    {
-      const ElfW(Sym) *sym;
-      int type_class;
-#ifdef DL_LOOKUP_RETURNS_MAP
-      struct link_map *value;
-#else
-      ElfW(Addr) value;
-#endif
-      const ElfW(Sym) *ret;
-    } l_lookup_cache;
-  };
-
-struct dl_phdr_info
-  {
-    ElfW(Addr) dlpi_addr;
-    const char *dlpi_name;
-    const ElfW(Phdr) *dlpi_phdr;
-    ElfW(Half) dlpi_phnum;
-  };
-
-extern int dl_iterate_phdr (int (*callback) (struct dl_phdr_info *info,
-					     size_t size, void *data),
-			    void *data);
-extern int __dl_iterate_phdr (int (*callback) (struct dl_phdr_info *info,
-					       size_t size, void *data),
-			      void *data);
-
-#endif /* link.h */
diff --git a/newlib/libc/sys/linux/include/malloc.h b/newlib/libc/sys/linux/include/malloc.h
deleted file mode 100644
index 7a7bcdbde..000000000
--- a/newlib/libc/sys/linux/include/malloc.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/* Prototypes and definition for malloc implementation.
-   Copyright (C) 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _MALLOC_H
-#define _MALLOC_H 1
-
-#include <features.h>
-
-/*
-  `ptmalloc', a malloc implementation for multiple threads without
-  lock contention, by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>.
-  See the files `ptmalloc.c' or `COPYRIGHT' for copying conditions.
-
-  VERSION 2.6.4-pt Wed Dec  4 00:35:54 MET 1996
-
-  This work is mainly derived from malloc-2.6.4 by Doug Lea
-  <dl@cs.oswego.edu>, which is available from:
-
-                 ftp://g.oswego.edu/pub/misc/malloc.c
-
-  This trimmed-down header file only provides function prototypes and
-  the exported data structures.  For more detailed function
-  descriptions and compile-time options, see the source file
-  `ptmalloc.c'.
-*/
-
-#if defined(__STDC__) || defined (__cplusplus)
-# include <stddef.h>
-# define __malloc_ptr_t  void *
-#else
-# undef  size_t
-# define size_t          unsigned int
-# undef  ptrdiff_t
-# define ptrdiff_t       int
-# define __malloc_ptr_t  char *
-#endif
-
-#ifdef _LIBC
-/* Used by GNU libc internals. */
-# define __malloc_size_t size_t
-# define __malloc_ptrdiff_t ptrdiff_t
-#elif !defined __attribute_malloc__
-# define __attribute_malloc__
-#endif
-
-#ifdef __GNUC__
-
-/* GCC can always grok prototypes.  For C++ programs we add throw()
-   to help it optimize the function calls.  But this works only with
-   gcc 2.8.x and egcs.  */
-# if defined __cplusplus && (__GNUC__ >= 3 || __GNUC_MINOR__ >= 8)
-#  define __THROW	throw ()
-# else
-#  define __THROW
-# endif
-# define __MALLOC_P(args)	args __THROW
-/* This macro will be used for functions which might take C++ callback
-   functions.  */
-# define __MALLOC_PMT(args)	args
-
-#else	/* Not GCC.  */
-
-# define __THROW
-
-# if (defined __STDC__ && __STDC__) || defined __cplusplus
-
-#  define __MALLOC_P(args)	args
-#  define __MALLOC_PMT(args)	args
-
-# else	/* Not ANSI C or C++.  */
-
-#  define __MALLOC_P(args)	()	/* No prototypes.  */
-#  define __MALLOC_PMT(args)	()
-
-# endif	/* ANSI C or C++.  */
-
-#endif	/* GCC.  */
-
-#ifndef NULL
-# ifdef __cplusplus
-#  define NULL	0
-# else
-#  define NULL	((__malloc_ptr_t) 0)
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct _reent;
-
-/* Nonzero if the malloc is already initialized.  */
-#ifdef _LIBC
-/* In the GNU libc we rename the global variable
-   `__malloc_initialized' to `__libc_malloc_initialized'.  */
-# define __malloc_initialized __libc_malloc_initialized
-#endif
-extern int __malloc_initialized;
-
-/* Initialize global configuration.  Not needed with GNU libc. */
-#ifndef __GLIBC__
-extern void ptmalloc_init __MALLOC_P ((void));
-#endif
-
-/* Allocate SIZE bytes of memory.  */
-extern __malloc_ptr_t malloc __MALLOC_P ((size_t __size)) __attribute_malloc__;
-extern __malloc_ptr_t _malloc_r __MALLOC_P ((struct _reent * __r, size_t __size)) __attribute_malloc__;
-
-/* Allocate NMEMB elements of SIZE bytes each, all initialized to 0.  */
-extern __malloc_ptr_t calloc __MALLOC_P ((size_t __nmemb, size_t __size))
-       __attribute_malloc__;
-extern __malloc_ptr_t _calloc_r __MALLOC_P ((struct _reent * __r,
-                                             size_t __nmemb, size_t __size))
-       __attribute_malloc__;
-
-/* Re-allocate the previously allocated block in __ptr, making the new
-   block SIZE bytes long.  */
-extern __malloc_ptr_t realloc __MALLOC_P ((__malloc_ptr_t __ptr,
-					   size_t __size))
-       __attribute_malloc__;
-extern __malloc_ptr_t _realloc_r __MALLOC_P ((struct _reent * __r,
-			         	      __malloc_ptr_t __ptr,
-				              size_t __size))
-       __attribute_malloc__;
-
-/* Free a block allocated by `malloc', `realloc' or `calloc'.  */
-extern void free __MALLOC_P ((__malloc_ptr_t __ptr));
-extern void _free_r __MALLOC_P ((struct _reent * __r, __malloc_ptr_t __ptr));
-
-/* Free a block allocated by `calloc'. */
-extern void cfree __MALLOC_P ((__malloc_ptr_t __ptr));
-
-/* Allocate SIZE bytes allocated to ALIGNMENT bytes.  */
-extern __malloc_ptr_t memalign __MALLOC_P ((size_t __alignment, size_t __size));
-extern __malloc_ptr_t _memalign_r __MALLOC_P ((struct _reent *__r,
-                                               size_t __alignment, 
-                                               size_t __size));
-
-/* Allocate SIZE bytes on a page boundary.  */
-extern __malloc_ptr_t valloc __MALLOC_P ((size_t __size)) __attribute_malloc__;
-extern __malloc_ptr_t _valloc_r __MALLOC_P ((struct _reent *__r,
-                                             size_t __size)) 
-       __attribute_malloc__;
-
-/* Equivalent to valloc(minimum-page-that-holds(n)), that is, round up
-   __size to nearest pagesize. */
-extern __malloc_ptr_t  pvalloc __MALLOC_P ((size_t __size))
-       __attribute_malloc__;
-extern __malloc_ptr_t  _pvalloc_r __MALLOC_P ((struct _reent *__r,
-                                               size_t __size))
-       __attribute_malloc__;
-
-/* Underlying allocation function; successive calls should return
-   contiguous pieces of memory.  */
-extern __malloc_ptr_t (*__morecore) __MALLOC_PMT ((ptrdiff_t __size));
-
-/* Default value of `__morecore'.  */
-extern __malloc_ptr_t __default_morecore __MALLOC_P ((ptrdiff_t __size))
-       __attribute_malloc__;
-
-/* SVID2/XPG mallinfo structure */
-struct mallinfo {
-  int arena;    /* total space allocated from system */
-  int ordblks;  /* number of non-inuse chunks */
-  int smblks;   /* unused -- always zero */
-  int hblks;    /* number of mmapped regions */
-  int hblkhd;   /* total space in mmapped regions */
-  int usmblks;  /* unused -- always zero */
-  int fsmblks;  /* unused -- always zero */
-  int uordblks; /* total allocated space */
-  int fordblks; /* total non-inuse space */
-  int keepcost; /* top-most, releasable (via malloc_trim) space */
-};
-
-/* Returns a copy of the updated current mallinfo. */
-extern struct mallinfo mallinfo __MALLOC_P ((void));
-extern struct mallinfo _mallinfo_r __MALLOC_P ((struct _reent *__r));
-
-/* SVID2/XPG mallopt options */
-#ifndef M_MXFAST
-# define M_MXFAST  1	/* UNUSED in this malloc */
-#endif
-#ifndef M_NLBLKS
-# define M_NLBLKS  2	/* UNUSED in this malloc */
-#endif
-#ifndef M_GRAIN
-# define M_GRAIN   3	/* UNUSED in this malloc */
-#endif
-#ifndef M_KEEP
-# define M_KEEP    4	/* UNUSED in this malloc */
-#endif
-
-/* mallopt options that actually do something */
-#define M_TRIM_THRESHOLD    -1
-#define M_TOP_PAD           -2
-#define M_MMAP_THRESHOLD    -3
-#define M_MMAP_MAX          -4
-#define M_CHECK_ACTION      -5
-
-/* General SVID/XPG interface to tunable parameters. */
-extern int mallopt __MALLOC_P ((int __param, int __val));
-extern int _mallopt_r __MALLOC_P ((struct _reent *__r, int __param, int __val));
-
-/* Release all but __pad bytes of freed top-most memory back to the
-   system. Return 1 if successful, else 0. */
-extern int malloc_trim __MALLOC_P ((size_t __pad));
-
-/* Report the number of usable allocated bytes associated with allocated
-   chunk __ptr. */
-extern size_t malloc_usable_size __MALLOC_P ((__malloc_ptr_t __ptr));
-
-/* Prints brief summary statistics on stderr. */
-extern void malloc_stats __MALLOC_P ((void));
-extern void _malloc_stats_r __MALLOC_P ((struct _reent *__r));
-
-/* Record the state of all malloc variables in an opaque data structure. */
-extern __malloc_ptr_t malloc_get_state __MALLOC_P ((void));
-
-/* Restore the state of all malloc variables from data obtained with
-   malloc_get_state(). */
-extern int malloc_set_state __MALLOC_P ((__malloc_ptr_t __ptr));
-
-#if defined __GLIBC__ || defined MALLOC_HOOKS
-/* Called once when malloc is initialized; redefining this variable in
-   the application provides the preferred way to set up the hook
-   pointers. */
-extern void (*__malloc_initialize_hook) __MALLOC_PMT ((void));
-/* Hooks for debugging and user-defined versions. */
-extern void (*__free_hook) __MALLOC_PMT ((__malloc_ptr_t __ptr,
-					__const __malloc_ptr_t));
-extern __malloc_ptr_t (*__malloc_hook) __MALLOC_PMT ((size_t __size,
-						    __const __malloc_ptr_t));
-extern __malloc_ptr_t (*__realloc_hook) __MALLOC_PMT ((__malloc_ptr_t __ptr,
-						     size_t __size,
-						     __const __malloc_ptr_t));
-extern __malloc_ptr_t (*__memalign_hook) __MALLOC_PMT ((size_t __alignment,
-						      size_t __size,
-						      __const __malloc_ptr_t));
-extern void (*__after_morecore_hook) __MALLOC_PMT ((void));
-
-/* Activate a standard set of debugging hooks. */
-extern void __malloc_check_init __MALLOC_P ((void));
-#endif
-
-#ifdef __cplusplus
-}; /* end of extern "C" */
-#endif
-
-#endif /* malloc.h */
diff --git a/newlib/libc/sys/linux/include/mcheck.h b/newlib/libc/sys/linux/include/mcheck.h
deleted file mode 100644
index 39e396d38..000000000
--- a/newlib/libc/sys/linux/include/mcheck.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib, July 9, 2002 by Jeff Johnston */
-
-#ifndef _MCHECK_H
-#define _MCHECK_H	1
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Return values for `mprobe': these are the kinds of inconsistencies that
-   `mcheck' enables detection of.  */
-enum mcheck_status
-  {
-    MCHECK_DISABLED = -1,       /* Consistency checking is not turned on.  */
-    MCHECK_OK,                  /* Block is fine.  */
-    MCHECK_FREE,                /* Block freed twice.  */
-    MCHECK_HEAD,                /* Memory before the block was clobbered.  */
-    MCHECK_TAIL                 /* Memory after the block was clobbered.  */
-  };
-
-
-/* Activate a standard collection of debugging hooks.  This must be called
-   before `malloc' is ever called.  ABORTFUNC is called with an error code
-   (see enum above) when an inconsistency is detected.  If ABORTFUNC is
-   null, the standard function prints on stderr and then calls `abort'.  */
-extern int mcheck (void (*__abortfunc) (enum mcheck_status));
-
-/* Similar to `mcheck´ but performs checks for all block whenever one of
-   the memory handling functions is called.  This can be very slow.  */
-extern int mcheck_pedantic (void (*__abortfunc) (enum mcheck_status));
-
-/* Force check of all blocks now.  */
-extern void mcheck_check_all (void);
-
-/* Check for aberrations in a particular malloc'd block.  You must have
-   called `mcheck' already.  These are the same checks that `mcheck' does
-   when you free or reallocate a block.  */
-extern enum mcheck_status mprobe (void *__ptr);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* mcheck.h */
diff --git a/newlib/libc/sys/linux/include/mqueue.h b/newlib/libc/sys/linux/include/mqueue.h
deleted file mode 100644
index 734ccfe47..000000000
--- a/newlib/libc/sys/linux/include/mqueue.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* libc/sys/linux/include/mqueue.h - message queue functions */
-
-/* Copyright 2002, Red Hat Inc. - all rights reserved */
-
-#ifndef __MQUEUE_H
-#define __MQUEUE_H
-
-#include <sys/types.h>
-#define __need_sigevent_t 1
-#include <bits/siginfo.h>
-
-#include <sys/fcntl.h>
-
-/* message queue types */
-typedef int mqd_t;
-
-struct mq_attr {
-  long mq_flags;    /* message queue flags */
-  long mq_maxmsg;   /* maximum number of messages */
-  long mq_msgsize;  /* maximum message size */
-  long mq_curmsgs;  /* number of messages currently queued */
-};
-
-#define MQ_PRIO_MAX 16
-
-/* prototypes */
-mqd_t mq_open (const char *__name, int __oflag, ...);
-int mq_close (mqd_t __msgid);
-int mq_send (mqd_t __msgid, const char *__msg, size_t __msg_len, unsigned int __msg_prio);
-ssize_t mq_receive (mqd_t __msgid, char *__msg, size_t __msg_len, unsigned int *__msg_prio);
-int mq_notify (mqd_t __msgid, const struct sigevent *__notification);
-int mq_unlink (const char *__name);
-int mq_getattr (mqd_t __msgid, struct mq_attr *__mqstat);
-int mq_setattr (mqd_t __msgid, const struct mq_attr *__mqstat, struct mq_attr *__omqattr);
-
-#endif /* __MQUEUE_H */
diff --git a/newlib/libc/sys/linux/include/namespace.h b/newlib/libc/sys/linux/include/namespace.h
deleted file mode 100644
index 159b8e33c..000000000
--- a/newlib/libc/sys/linux/include/namespace.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/include/namespace.h,v 1.9 2002/03/29 22:43:42 markm Exp $
- */
-
-#ifndef _NAMESPACE_H_
-#define _NAMESPACE_H_
-
-/*
- * Adjust names so that headers declare "hidden" names.
- */
-
-/*
- * ISO C (C90) section.  Most names in libc aren't in ISO C, so they
- * should be here.  Most aren't here...
- */
-#define		err				_err
-#define		warn				_warn
-
-/*
- * Prototypes for syscalls/functions that need to be overridden
- * in libc_r/libpthread.
- */
-#define		accept				_accept
-#define		__acl_aclcheck_fd		___acl_aclcheck_fd
-#define		__acl_delete_fd			___acl_delete_fd
-#define		__acl_get_fd			___acl_get_fd
-#define		__acl_set_fd			___acl_set_fd
-#define		bind				_bind
-#define		__cap_get_fd			___cap_get_fd
-#define		__cap_set_fd			___cap_set_fd
-#define		close				_close
-#define		connect				_connect
-#define		dup				_dup
-#define		dup2				_dup2
-#define		execve				_execve
-#define		fcntl				_fcntl
-/*#define		flock				_flock */
-#define		fstat				_fstat
-#define		fstatfs				_fstatfs
-#define		fsync				_fsync
-#define		getdirentries			_getdirentries
-#define		getlogin			_getlogin
-#define		getpeername			_getpeername
-#define		getprogname			_getprogname
-#define		getsockname			_getsockname
-#define		getsockopt			_getsockopt
-#define		ioctl				_ioctl
-/* #define		kevent				_kevent */
-#define		listen				_listen
-#define		nanosleep			_nanosleep
-#define		open				_open
-#define		poll				_poll
-#define		pthread_cond_signal		_pthread_cond_signal
-#define		pthread_cond_wait		_pthread_cond_wait
-#define		pthread_cond_init		_pthread_cond_init
-#define		pthread_exit			_pthread_exit
-#define		pthread_getspecific		_pthread_getspecific
-#define		pthread_key_create		_pthread_key_create
-#define		pthread_key_delete		_pthread_key_delete
-#define		pthread_main_np			_pthread_main_np
-#define		pthread_mutex_destroy		_pthread_mutex_destroy
-#define		pthread_mutex_init		_pthread_mutex_init
-#define		pthread_mutex_lock		_pthread_mutex_lock
-#define		pthread_mutex_trylock		_pthread_mutex_trylock
-#define		pthread_mutex_unlock		_pthread_mutex_unlock
-#define		pthread_mutexattr_init		_pthread_mutexattr_init
-#define		pthread_mutexattr_destroy	_pthread_mutexattr_destroy
-#define		pthread_mutexattr_settype	_pthread_mutexattr_settype
-#define		pthread_once			_pthread_once
-#define		pthread_rwlock_init		_pthread_rwlock_init
-#define		pthread_rwlock_rdlock		_pthread_rwlock_rdlock
-#define		pthread_rwlock_wrlock		_pthread_rwlock_wrlock
-#define		pthread_rwlock_unlock		_pthread_rwlock_unlock
-#define		pthread_self			_pthread_self
-#define		pthread_setspecific		_pthread_setspecific
-#define		pthread_sigmask			_pthread_sigmask
-#define		read				_read
-#define		readv				_readv
-#define		recvfrom			_recvfrom
-#define		recvmsg				_recvmsg
-#define		select				_select
-#define		sendmsg				_sendmsg
-#define		sendto				_sendto
-#define		setsockopt			_setsockopt
-/*#define		sigaction			_sigaction*/
-#define		sigprocmask			_sigprocmask
-#define		sigsuspend			_sigsuspend
-#define		socket				_socket
-#define		socketpair			_socketpair
-#define		wait4				_wait4
-#define		write				_write
-#define		writev				_writev
-
-
-/*
- * Other hidden syscalls/functions that libc_r needs to override
- * but are not used internally by libc.
- *
- * XXX - When modifying libc to use one of the following, remove
- * the prototype from below and place it in the list above.
- */
-#if 0
-#define		creat				_creat
-#define		fchflags			_fchflags
-#define		fchmod				_fchmod
-#define		fpathconf			_fpathconf
-#define		msync				_msync
-#define		nfssvc				_nfssvc
-#define		pause				_pause
-#define		pthread_rwlock_destroy		_pthread_rwlock_destroy
-#define		pthread_rwlock_tryrdlock	_pthread_rwlock_tryrdlock
-#define		pthread_rwlock_trywrlock	_pthread_rwlock_trywrlock
-#define		pthread_rwlockattr_init		_pthread_rwlockattr_init
-#define		pthread_rwlockattr_destroy	_pthread_rwlockattr_destroy
-#define		sched_yield			_sched_yield
-#define		sendfile			_sendfile
-#define		shutdown			_shutdown
-#define		sigaltstack			_sigaltstack
-#define		sigpending			_sigpending
-#define		sigreturn			_sigreturn
-#define		sigsetmask			_sigsetmask
-#define		sleep				_sleep
-#define		system				_system
-#define		tcdrain				_tcdrain
-#define		wait				_wait
-#define		waitpid				_waitpid
-#endif
-
-#endif /* _NAMESPACE_H_ */
diff --git a/newlib/libc/sys/linux/include/net/bpf.h b/newlib/libc/sys/linux/include/net/bpf.h
deleted file mode 100644
index 1f4a8be2b..000000000
--- a/newlib/libc/sys/linux/include/net/bpf.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Copyright (c) 1990, 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      @(#)bpf.h	8.1 (Berkeley) 6/10/93
- *	@(#)bpf.h	1.34 (LBL)     6/16/96
- *
- * $FreeBSD: src/sys/net/bpf.h,v 1.25 2002/03/19 21:54:16 alfred Exp $
- */
-
-#ifndef _NET_BPF_H_
-#define _NET_BPF_H_
-
-/* BSD style release date */
-#define	BPF_RELEASE 199606
-
-typedef	int32_t	  bpf_int32;
-typedef	u_int32_t bpf_u_int32;
-
-/*
- * Alignment macros.  BPF_WORDALIGN rounds up to the next
- * even multiple of BPF_ALIGNMENT.
- */
-#define BPF_ALIGNMENT sizeof(long)
-#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
-
-#define BPF_MAXINSNS 512
-#define BPF_MAXBUFSIZE 0x80000
-#define BPF_MINBUFSIZE 32
-
-/*
- *  Structure for BIOCSETF.
- */
-struct bpf_program {
-	u_int bf_len;
-	struct bpf_insn *bf_insns;
-};
-
-/*
- * Struct returned by BIOCGSTATS.
- */
-struct bpf_stat {
-	u_int bs_recv;		/* number of packets received */
-	u_int bs_drop;		/* number of packets dropped */
-};
-
-/*
- * Struct return by BIOCVERSION.  This represents the version number of
- * the filter language described by the instruction encodings below.
- * bpf understands a program iff kernel_major == filter_major &&
- * kernel_minor >= filter_minor, that is, if the value returned by the
- * running kernel has the same major number and a minor number equal
- * equal to or less than the filter being downloaded.  Otherwise, the
- * results are undefined, meaning an error may be returned or packets
- * may be accepted haphazardly.
- * It has nothing to do with the source code version.
- */
-struct bpf_version {
-	u_short bv_major;
-	u_short bv_minor;
-};
-/* Current version number of filter architecture. */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-#define	BIOCGBLEN	_IOR('B',102, u_int)
-#define	BIOCSBLEN	_IOWR('B',102, u_int)
-#define	BIOCSETF	_IOW('B',103, struct bpf_program)
-#define	BIOCFLUSH	_IO('B',104)
-#define BIOCPROMISC	_IO('B',105)
-#define	BIOCGDLT	_IOR('B',106, u_int)
-#define BIOCGETIF	_IOR('B',107, struct ifreq)
-#define BIOCSETIF	_IOW('B',108, struct ifreq)
-#define BIOCSRTIMEOUT	_IOW('B',109, struct timeval)
-#define BIOCGRTIMEOUT	_IOR('B',110, struct timeval)
-#define BIOCGSTATS	_IOR('B',111, struct bpf_stat)
-#define BIOCIMMEDIATE	_IOW('B',112, u_int)
-#define BIOCVERSION	_IOR('B',113, struct bpf_version)
-#define BIOCGRSIG	_IOR('B',114, u_int)
-#define BIOCSRSIG	_IOW('B',115, u_int)
-#define BIOCGHDRCMPLT	_IOR('B',116, u_int)
-#define BIOCSHDRCMPLT	_IOW('B',117, u_int)
-#define BIOCGSEESENT	_IOR('B',118, u_int)
-#define BIOCSSEESENT	_IOW('B',119, u_int)
-
-/*
- * Structure prepended to each packet.
- */
-struct bpf_hdr {
-	struct timeval	bh_tstamp;	/* time stamp */
-	bpf_u_int32	bh_caplen;	/* length of captured portion */
-	bpf_u_int32	bh_datalen;	/* original length of packet */
-	u_short		bh_hdrlen;	/* length of bpf header (this struct
-					   plus alignment padding) */
-};
-/*
- * Because the structure above is not a multiple of 4 bytes, some compilers
- * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work.
- * Only the kernel needs to know about it; applications use bh_hdrlen.
- */
-#ifdef _KERNEL
-#define	SIZEOF_BPF_HDR	(sizeof(struct bpf_hdr) <= 20 ? 18 : \
-    sizeof(struct bpf_hdr))
-#endif
-
-/*
- * Data-link level type codes.
- */
-#define DLT_NULL	0	/* no link-layer encapsulation */
-#define DLT_EN10MB	1	/* Ethernet (10Mb) */
-#define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */
-#define DLT_AX25	3	/* Amateur Radio AX.25 */
-#define DLT_PRONET	4	/* Proteon ProNET Token Ring */
-#define DLT_CHAOS	5	/* Chaos */
-#define DLT_IEEE802	6	/* IEEE 802 Networks */
-#define DLT_ARCNET	7	/* ARCNET */
-#define DLT_SLIP	8	/* Serial Line IP */
-#define DLT_PPP		9	/* Point-to-point Protocol */
-#define DLT_FDDI	10	/* FDDI */
-#define DLT_ATM_RFC1483	11	/* LLC/SNAP encapsulated atm */
-#define DLT_RAW		12	/* raw IP */
-
-/*
- * These are values from BSD/OS's "bpf.h".
- * These are not the same as the values from the traditional libpcap
- * "bpf.h"; however, these values shouldn't be generated by any
- * OS other than BSD/OS, so the correct values to use here are the
- * BSD/OS values.
- *
- * Platforms that have already assigned these values to other
- * DLT_ codes, however, should give these codes the values
- * from that platform, so that programs that use these codes will
- * continue to compile - even though they won't correctly read
- * files of these types.
- */
-#define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */
-
-#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM */
-
-/*
- * This value is defined by NetBSD; other platforms should refrain from
- * using it for other purposes, so that NetBSD savefiles with a link
- * type of 50 can be read as this type on all platforms.
- */
-#define DLT_PPP_SERIAL	50	/* PPP over serial with HDLC encapsulation */
-
-/*
- * This value was defined by libpcap 0.5; platforms that have defined
- * it with a different value should define it here with that value -
- * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
- * whatever value that happens to be, so programs will correctly
- * handle files with that link type regardless of the value of
- * DLT_C_HDLC.
- *
- * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
- * compatibility with programs written for BSD/OS.
- *
- * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
- * for source compatibility with programs written for libpcap 0.5.
- */
-#define DLT_C_HDLC	104	/* Cisco HDLC */
-#define DLT_CHDLC	DLT_C_HDLC
-
-/*
- * Reserved for future use.
- * Do not pick other numerical value for these unless you have also
- * picked up the tcpdump.org top-of-CVS-tree version of "savefile.c",
- * which will arrange that capture files for these DLT_ types have
- * the same "network" value on all platforms, regardless of what
- * value is chosen for their DLT_ type (thus allowing captures made
- * on one platform to be read on other platforms, even if the two
- * platforms don't use the same numerical values for all DLT_ types).
- */
-#define DLT_IEEE802_11	105	/* IEEE 802.11 wireless */
-
-/*
- * Values between 106 and 107 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
- * that the AF_ type in the link-layer header is in network byte order.
- *
- * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
- * define it as 108 here.  If OpenBSD picks up this file, it should
- * define DLT_LOOP as 12 in its version, as per the comment above -
- * and should not use 108 for any purpose.
- */
-#define DLT_LOOP	108
-
-/*
- * Values between 109 and 112 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * This is for Linux cooked sockets.
- */
-#define DLT_LINUX_SLL	113
-
-/*
- * The instruction encodings.
- */
-/* instruction classes */
-#define BPF_CLASS(code) ((code) & 0x07)
-#define		BPF_LD		0x00
-#define		BPF_LDX		0x01
-#define		BPF_ST		0x02
-#define		BPF_STX		0x03
-#define		BPF_ALU		0x04
-#define		BPF_JMP		0x05
-#define		BPF_RET		0x06
-#define		BPF_MISC	0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)	((code) & 0x18)
-#define		BPF_W		0x00
-#define		BPF_H		0x08
-#define		BPF_B		0x10
-#define BPF_MODE(code)	((code) & 0xe0)
-#define		BPF_IMM 	0x00
-#define		BPF_ABS		0x20
-#define		BPF_IND		0x40
-#define		BPF_MEM		0x60
-#define		BPF_LEN		0x80
-#define		BPF_MSH		0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)	((code) & 0xf0)
-#define		BPF_ADD		0x00
-#define		BPF_SUB		0x10
-#define		BPF_MUL		0x20
-#define		BPF_DIV		0x30
-#define		BPF_OR		0x40
-#define		BPF_AND		0x50
-#define		BPF_LSH		0x60
-#define		BPF_RSH		0x70
-#define		BPF_NEG		0x80
-#define		BPF_JA		0x00
-#define		BPF_JEQ		0x10
-#define		BPF_JGT		0x20
-#define		BPF_JGE		0x30
-#define		BPF_JSET	0x40
-#define BPF_SRC(code)	((code) & 0x08)
-#define		BPF_K		0x00
-#define		BPF_X		0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)	((code) & 0x18)
-#define		BPF_A		0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define		BPF_TAX		0x00
-#define		BPF_TXA		0x80
-
-/*
- * The instruction data structure.
- */
-struct bpf_insn {
-	u_short		code;
-	u_char		jt;
-	u_char		jf;
-	bpf_u_int32	k;
-};
-
-/*
- * Macros for insn array initializers.
- */
-#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
-#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
-
-#ifdef _KERNEL
-int	 bpf_validate(const struct bpf_insn *, int);
-void	 bpf_tap(struct ifnet *, u_char *, u_int);
-void	 bpf_mtap(struct ifnet *, struct mbuf *);
-void	 bpfattach(struct ifnet *, u_int, u_int);
-void	 bpfdetach(struct ifnet *);
-
-void	 bpfilterattach(int);
-u_int	 bpf_filter(const struct bpf_insn *, u_char *, u_int, u_int);
-#endif
-
-/*
- * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
- */
-#define BPF_MEMWORDS 16
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/bpf_compat.h b/newlib/libc/sys/linux/include/net/bpf_compat.h
deleted file mode 100644
index 31cd06904..000000000
--- a/newlib/libc/sys/linux/include/net/bpf_compat.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)bpf_compat.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/bpf_compat.h,v 1.8 2000/12/27 22:20:13 bmilekic Exp $
- */
-
-#ifndef _NET_BPF_COMPAT_H_
-#define _NET_BPF_COMPAT_H_
-
-/*
- * Some hacks for compatibility across SunOS and 4.4BSD.  We emulate malloc
- * and free with mbuf clusters.  We store a pointer to the mbuf in the first
- * word of the mbuf and return 8 bytes passed the start of data (for double
- * word alignment).  We cannot just use offsets because clusters are not at
- * a fixed offset from the associated mbuf.  Sorry for this kludge.
- */
-#define malloc(size, type, canwait) bpf_alloc(size, canwait)
-#define free(cp, type) m_free(*(struct mbuf **)(cp - 8))
-#define M_WAITOK M_TRYWAIT
-#define M_NOWAIT M_DONTWAIT
-
-/* This mapping works for our purposes. */
-#define ERESTART EINTR
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/bpfdesc.h b/newlib/libc/sys/linux/include/net/bpfdesc.h
deleted file mode 100644
index ec0c8fc95..000000000
--- a/newlib/libc/sys/linux/include/net/bpfdesc.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (c) 1990, 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      @(#)bpfdesc.h	8.1 (Berkeley) 6/10/93
- *
- * $FreeBSD: src/sys/net/bpfdesc.h,v 1.19 2001/12/14 22:17:54 jdp Exp $
- */
-
-#ifndef _NET_BPFDESC_H_
-#define _NET_BPFDESC_H_
-
-#include <sys/callout.h>
-#include <sys/selinfo.h>
-
-/*
- * Descriptor associated with each open bpf file.
- */
-struct bpf_d {
-	struct bpf_d	*bd_next;	/* Linked list of descriptors */
-	/*
-	 * Buffer slots: two mbuf clusters buffer the incoming packets.
-	 *   The model has three slots.  Sbuf is always occupied.
-	 *   sbuf (store) - Receive interrupt puts packets here.
-	 *   hbuf (hold) - When sbuf is full, put cluster here and
-	 *                 wakeup read (replace sbuf with fbuf).
-	 *   fbuf (free) - When read is done, put cluster here.
-	 * On receiving, if sbuf is full and fbuf is 0, packet is dropped.
-	 */
-	caddr_t		bd_sbuf;	/* store slot */
-	caddr_t		bd_hbuf;	/* hold slot */
-	caddr_t		bd_fbuf;	/* free slot */
-	int 		bd_slen;	/* current length of store buffer */
-	int 		bd_hlen;	/* current length of hold buffer */
-
-	int		bd_bufsize;	/* absolute length of buffers */
-
-	struct bpf_if *	bd_bif;		/* interface descriptor */
-	u_long		bd_rtout;	/* Read timeout in 'ticks' */
-	struct bpf_insn *bd_filter; 	/* filter code */
-	u_long		bd_rcount;	/* number of packets received */
-	u_long		bd_dcount;	/* number of packets dropped */
-
-	u_char		bd_promisc;	/* true if listening promiscuously */
-	u_char		bd_state;	/* idle, waiting, or timed out */
-	u_char		bd_immediate;	/* true to return on packet arrival */
-	int		bd_hdrcmplt;	/* false to fill in src lladdr automatically */
-	int		bd_seesent;	/* true if bpf should see sent packets */
-	int		bd_async;	/* non-zero if packet reception should generate signal */
-	int		bd_sig;		/* signal to send upon packet reception */
-	struct sigio *	bd_sigio;	/* information for async I/O */
-#if BSD < 199103
-	u_char		bd_selcoll;	/* true if selects collide */
-	int		bd_timedout;
-	struct thread *	bd_selthread;	/* process that last selected us */
-#else
-	u_char		bd_pad;		/* explicit alignment */
-	struct selinfo	bd_sel;		/* bsd select info */
-#endif
-	struct mtx	bd_mtx;		/* mutex for this descriptor */
-	struct callout	bd_callout;	/* for BPF timeouts with select */
-};
-
-/* Values for bd_state */
-#define BPF_IDLE	0		/* no select in progress */
-#define BPF_WAITING	1		/* waiting for read timeout in select */
-#define BPF_TIMED_OUT	2		/* read timeout has expired in select */
-
-#define BPFD_LOCK(bd)		mtx_lock(&(bd)->bd_mtx)
-#define BPFD_UNLOCK(bd)		mtx_unlock(&(bd)->bd_mtx)
-
-/*
- * Descriptor associated with each attached hardware interface.
- */
-struct bpf_if {
-	struct bpf_if *bif_next;	/* list of all interfaces */
-	struct bpf_d *bif_dlist;	/* descriptor list */
-	u_int bif_dlt;			/* link layer type */
-	u_int bif_hdrlen;		/* length of header (with padding) */
-	struct ifnet *bif_ifp;		/* corresponding interface */
-	struct mtx	bif_mtx;	/* mutex for interface */
-};
-
-#define BPFIF_LOCK(bif)		mtx_lock(&(bif)->bif_mtx)
-#define BPFIF_UNLOCK(bif)	mtx_unlock(&(bif)->bif_mtx)
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/bridge.h b/newlib/libc/sys/linux/include/net/bridge.h
deleted file mode 100644
index a90f2747b..000000000
--- a/newlib/libc/sys/linux/include/net/bridge.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (c) 1998-2002 Luigi Rizzo
- *
- * Work partly supported by: Cisco Systems, Inc. - NSITE lab, RTP, NC
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/bridge.h,v 1.11 2002/02/15 05:11:11 luigi Exp $
- */
-
-extern int do_bridge;
-
-/*
- * We need additional per-interface info for the bridge, which is
- * stored in a struct bdg_softc. The ifp2sc[] array provides a pointer
- * to this struct using the if_index as a mapping key.
- * bdg_softc has a backpointer to the struct ifnet, the bridge
- * flags, and a cluster (bridging occurs only between port of the
- * same cluster).
- */
-
-struct cluster_softc;	/* opaque here, defined in bridge.c */
-
-struct bdg_softc {
-    struct ifnet *ifp ;
-    /* also ((struct arpcom *)ifp)->ac_enaddr is the eth. addr */
-    int flags ;
-#define IFF_BDG_PROMISC 0x0001  /* set promisc mode on this if.	*/
-#define IFF_MUTE        0x0002  /* mute this if for bridging.   */
-#define IFF_USED        0x0004  /* use this if for bridging.    */
-    struct cluster_softc *cluster;
-} ;
-
-extern struct bdg_softc *ifp2sc;
-
-#define BDG_USED(ifp) (ifp2sc[ifp->if_index].flags & IFF_USED)
-/*
- * BDG_ACTIVE(ifp) does all checks to see if bridging is enabled, loaded,
- * and used on a given interface.
- */
-#define	BDG_ACTIVE(ifp)	(do_bridge && BDG_LOADED && BDG_USED(ifp))
-
-/*
- * The following constants are not legal ifnet pointers, and are used
- * as return values from the classifier, bridge_dst_lookup().
- * The same values are used as index in the statistics arrays,
- * with BDG_FORWARD replacing specifically forwarded packets.
- *
- * These constants are here because they are used in 'netstat'
- * to show bridge statistics.
- */
-#define BDG_BCAST	( (struct ifnet *)1 )
-#define BDG_MCAST	( (struct ifnet *)2 )
-#define BDG_LOCAL	( (struct ifnet *)3 )
-#define BDG_DROP	( (struct ifnet *)4 )
-#define BDG_UNKNOWN	( (struct ifnet *)5 )
-#define BDG_IN		( (struct ifnet *)7 )
-#define BDG_OUT		( (struct ifnet *)8 )
-#define BDG_FORWARD	( (struct ifnet *)9 )
-
-/*
- * Statistics are passed up with the sysctl interface, "netstat -p bdg"
- * reads them. PF_BDG defines the 'bridge' protocol family.
- */
-
-#define PF_BDG 3 /* XXX superhack */
-
-#define STAT_MAX (int)BDG_FORWARD
-struct bdg_port_stat {
-    char name[16];
-    u_long collisions;
-    u_long p_in[STAT_MAX+1];
-} ;
-
-/* XXX this should be made dynamic */
-#define BDG_MAX_PORTS 128
-struct bdg_stats {
-    struct bdg_port_stat s[BDG_MAX_PORTS];
-} ;
-
-
-#define BDG_STAT(ifp, type) bdg_stats.s[ifp->if_index].p_in[(uintptr_t)type]++ 
- 
-#ifdef _KERNEL
-typedef	struct ifnet *bridge_in_t(struct ifnet *, struct ether_header *);
-/* bdg_forward frees the mbuf if necessary, returning null */
-typedef	struct mbuf *bdg_forward_t(struct mbuf *, struct ether_header *const,
-		struct ifnet *);
-typedef	void bdgtakeifaces_t(void);
-extern	bridge_in_t *bridge_in_ptr;
-extern	bdg_forward_t *bdg_forward_ptr;
-extern	bdgtakeifaces_t *bdgtakeifaces_ptr;
-
-#define	BDG_LOADED	(bdgtakeifaces_ptr != NULL)
-#endif /* KERNEL */
diff --git a/newlib/libc/sys/linux/include/net/ethernet.h b/newlib/libc/sys/linux/include/net/ethernet.h
deleted file mode 100644
index 6b1d1c9be..000000000
--- a/newlib/libc/sys/linux/include/net/ethernet.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Fundamental constants relating to ethernet.
- *
- * $FreeBSD: src/sys/net/ethernet.h,v 1.20 2002/04/04 05:42:09 luigi Exp $
- *
- */
-
-#ifndef _NET_ETHERNET_H_
-#define _NET_ETHERNET_H_
-
-/*
- * The number of bytes in an ethernet (MAC) address.
- */
-#define	ETHER_ADDR_LEN		6
-
-/*
- * The number of bytes in the type field.
- */
-#define	ETHER_TYPE_LEN		2
-
-/*
- * The number of bytes in the trailing CRC field.
- */
-#define	ETHER_CRC_LEN		4
-
-/*
- * The length of the combined header.
- */
-#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-
-/*
- * The minimum packet length.
- */
-#define	ETHER_MIN_LEN		64
-
-/*
- * The maximum packet length.
- */
-#define	ETHER_MAX_LEN		1518
-
-/*
- * A macro to validate a length with
- */
-#define	ETHER_IS_VALID_LEN(foo)	\
-	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-
-/*
- * Structure of a 10Mb/s Ethernet header.
- */
-struct	ether_header {
-	u_char	ether_dhost[ETHER_ADDR_LEN];
-	u_char	ether_shost[ETHER_ADDR_LEN];
-	u_short	ether_type;
-};
-
-/*
- * Structure of a 48-bit Ethernet address.
- */
-struct	ether_addr {
-	u_char octet[ETHER_ADDR_LEN];
-};
-
-#define	ETHERTYPE_PUP		0x0200	/* PUP protocol */
-#define	ETHERTYPE_IP		0x0800	/* IP protocol */
-#define	ETHERTYPE_ARP		0x0806	/* Addr. resolution protocol */
-#define	ETHERTYPE_REVARP	0x8035	/* reverse Addr. resolution protocol */
-#define	ETHERTYPE_VLAN		0x8100	/* IEEE 802.1Q VLAN tagging */
-#define	ETHERTYPE_IPV6		0x86dd	/* IPv6 */
-#define	ETHERTYPE_LOOPBACK	0x9000	/* used to test interfaces */
-/* XXX - add more useful types here */
-
-/*
- * The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have
- * (type-ETHERTYPE_TRAIL)*512 bytes of data followed
- * by an ETHER type (as given above) and then the (variable-length) header.
- */
-#define	ETHERTYPE_TRAIL		0x1000		/* Trailer packet */
-#define	ETHERTYPE_NTRAILER	16
-
-#define	ETHERMTU	(ETHER_MAX_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
-#define	ETHERMIN	(ETHER_MIN_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
-
-#ifdef _KERNEL
-
-/*
- * For device drivers to specify whether they support BPF or not
- */
-#define ETHER_BPF_UNSUPPORTED	0
-#define ETHER_BPF_SUPPORTED	1
-
-struct ifnet;
-struct mbuf;
-
-extern	void (*ng_ether_input_p)(struct ifnet *ifp,
-		struct mbuf **mp, struct ether_header *eh);
-extern	void (*ng_ether_input_orphan_p)(struct ifnet *ifp,
-		struct mbuf *m, struct ether_header *eh);
-extern	int  (*ng_ether_output_p)(struct ifnet *ifp, struct mbuf **mp);
-extern	void (*ng_ether_attach_p)(struct ifnet *ifp);
-extern	void (*ng_ether_detach_p)(struct ifnet *ifp);
-
-extern	int (*vlan_input_p)(struct ether_header *eh, struct mbuf *m);
-extern	int (*vlan_input_tag_p)(struct ether_header *eh, struct mbuf *m,
-		u_int16_t t);
-
-#define	VLAN_INPUT_TAG(eh, m, t) do {			\
-	/* XXX: lock */					\
-	if (vlan_input_tag_p != NULL) 			\
-		(*vlan_input_tag_p)(eh, m, t);		\
-	else {						\
-		(m)->m_pkthdr.rcvif->if_noproto++;	\
-		m_freem(m);				\
-	}						\
-	/* XXX: unlock */				\
-} while (0)
-
-#else /* _KERNEL */
-
-#include <sys/cdefs.h>
-
-/*
- * Ethernet address conversion/parsing routines.
- */
-__BEGIN_DECLS
-struct	ether_addr *ether_aton(const char *);
-int	ether_hostton(const char *, struct ether_addr *);
-int	ether_line(const char *, struct ether_addr *, char *);
-char 	*ether_ntoa(const struct ether_addr *);
-int	ether_ntohost(char *, const struct ether_addr *);
-__END_DECLS
-
-#endif /* !_KERNEL */
-
-#endif /* !_NET_ETHERNET_H_ */
diff --git a/newlib/libc/sys/linux/include/net/fddi.h b/newlib/libc/sys/linux/include/net/fddi.h
deleted file mode 100644
index e9a3b55fa..000000000
--- a/newlib/libc/sys/linux/include/net/fddi.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- * Copyright (c) 1995 Matt Thomas (thomas@lkg.dec.com)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_fddi.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/fddi.h,v 1.12 2002/03/29 11:22:22 mdodd Exp $
- */
-
-#ifndef _NETINET_IF_FDDI_H_
-#define _NETINET_IF_FDDI_H_
-
-#define	FDDIIPMTU		4352
-#define	FDDIMTU			4470
-#define	FDDIMIN			3
-
-#define	FDDIFC_C		0x80	/* 0b10000000 */
-#define	FDDIFC_L		0x40	/* 0b01000000 */
-#define	FDDIFC_F		0x30	/* 0b00110000 */
-#define	FDDIFC_Z		0x0F	/* 0b00001111 */
-#define	FDDIFC_CLFF		0xF0	/* Class/Length/Format bits */
-#define	FDDIFC_ZZZZ		0x0F	/* Control bits */
-
-/*
- * FDDI Frame Control values. (48-bit addressing only).
- */
-#define	FDDIFC_VOID		0x40	/* Void frame */
-#define	FDDIFC_NRT		0x80	/* Nonrestricted token */
-#define	FDDIFC_RT		0xc0	/* Restricted token */
-#define	FDDIFC_MAC_BEACON	0xc2	/* MAC Beacon frame */
-#define	FDDIFC_MAC_CLAIM	0xc3	/* MAC Claim frame */
-#define	FDDIFC_LLC_ASYNC	0x50
-#define	FDDIFC_LLC_PRIO0	0
-#define	FDDIFC_LLC_PRIO1	1
-#define	FDDIFC_LLC_PRIO2	2
-#define	FDDIFC_LLC_PRIO3	3
-#define	FDDIFC_LLC_PRIO4	4
-#define	FDDIFC_LLC_PRIO5	5
-#define	FDDIFC_LLC_PRIO6	6
-#define	FDDIFC_LLC_PRIO7	7
-#define	FDDIFC_LLC_SYNC		0xd0
-#define	FDDIFC_IMP_ASYNC	0x60	/* Implementor Async. */
-#define	FDDIFC_IMP_SYNC		0xe0	/* Implementor Synch. */
-#define	FDDIFC_SMT		0x40
-#define	FDDIFC_SMT_INFO		0x41	/* SMT Info */
-#define	FDDIFC_SMT_NSA		0x4F	/* SMT Next station adrs */
-#define	FDDIFC_MAC		0xc0	/* MAC frame */
-
-#define	FDDI_ADDR_LEN		6
-#define	FDDI_HDR_LEN		(sizeof(struct fddi_header))
-
-/*
- * Structure of an 100Mb/s FDDI header.
- */
-struct fddi_header {
-	u_char  fddi_fc;
-	u_char  fddi_dhost[FDDI_ADDR_LEN];
-	u_char  fddi_shost[FDDI_ADDR_LEN];
-};
-
-#if defined(_KERNEL)
-#define	fddi_ipmulticast_min	ether_ipmulticast_min
-#define	fddi_ipmulticast_max	ether_ipmulticast_max
-#define	fddi_addmulti		ether_addmulti
-#define	fddi_delmulti		ether_delmulti
-#define	fddi_sprintf		ether_sprintf
-
-#define	FDDI_BPF_UNSUPPORTED	0
-#define	FDDI_BPF_SUPPORTED	1
-
-void	fddi_ifattach(struct ifnet *, int);
-void	fddi_ifdetach(struct ifnet *, int);
-void	fddi_input(struct ifnet *, struct fddi_header *, struct mbuf *);
-int	fddi_ioctl(struct ifnet *, int, caddr_t);
-
-#endif	/* _KERNEL */
-#endif	/* _NET_FDDI_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if.h b/newlib/libc/sys/linux/include/net/if.h
deleted file mode 100644
index bf021e6f9..000000000
--- a/newlib/libc/sys/linux/include/net/if.h
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/if.h,v 1.71 2002/03/19 21:54:16 alfred Exp $
- */
-
-#ifndef _NET_IF_H_
-#define	_NET_IF_H_
-
-#include <sys/queue.h>
-
-/*
- * <net/if.h> does not depend on <sys/time.h> on most other systems.  This
- * helps userland compatibility.  (struct timeval ifi_lastchange)
- */
-#ifndef _KERNEL
-#include <sys/time.h>
-#endif
-
-struct ifnet;
-
-/*
- * Length of interface external name, including terminating '\0'.
- * Note: this is the same size as a generic device's external name.
- */
-#define		IFNAMSIZ	16
-#define		IF_NAMESIZE	IFNAMSIZ
-#define		IF_MAXUNIT	0x7fff	/* ifp->if_unit is only 15 bits */
-
-/*
- * Structure describing a `cloning' interface.
- */
-struct if_clone {
-	LIST_ENTRY(if_clone) ifc_list;	/* on list of cloners */
-	const char *ifc_name;		/* name of device, e.g. `gif' */
-	size_t ifc_namelen;		/* length of name */
-	int ifc_maxunit;		/* maximum unit number */
-	unsigned char *ifc_units;	/* bitmap to handle units */
-	int ifc_bmlen;			/* bitmap length */
-
-	int	(*ifc_create)(struct if_clone *, int);
-	int	(*ifc_destroy)(struct ifnet *);
-};
-
-#define IF_CLONE_INITIALIZER(name, create, destroy, maxunit)		\
-	{ { 0 }, name, sizeof(name) - 1, maxunit, NULL, 0, create, destroy }
-
-/*
- * Structure used to query names of interface cloners.
- */
-
-struct if_clonereq {
-	int	ifcr_total;		/* total cloners (out) */
-	int	ifcr_count;		/* room for this many in user buffer */
-	char	*ifcr_buffer;		/* buffer for cloner names */
-};
-
-/*
- * Structure describing information about an interface
- * which may be of interest to management entities.
- */
-struct if_data {
-	/* generic interface information */
-	u_char	ifi_type;		/* ethernet, tokenring, etc */
-	u_char	ifi_physical;		/* e.g., AUI, Thinnet, 10base-T, etc */
-	u_char	ifi_addrlen;		/* media address length */
-	u_char	ifi_hdrlen;		/* media header length */
-	u_char	ifi_recvquota;		/* polling quota for receive intrs */
-	u_char	ifi_xmitquota;		/* polling quota for xmit intrs */
-	u_long	ifi_mtu;		/* maximum transmission unit */
-	u_long	ifi_metric;		/* routing metric (external only) */
-	u_long	ifi_baudrate;		/* linespeed */
-	/* volatile statistics */
-	u_long	ifi_ipackets;		/* packets received on interface */
-	u_long	ifi_ierrors;		/* input errors on interface */
-	u_long	ifi_opackets;		/* packets sent on interface */
-	u_long	ifi_oerrors;		/* output errors on interface */
-	u_long	ifi_collisions;		/* collisions on csma interfaces */
-	u_long	ifi_ibytes;		/* total number of octets received */
-	u_long	ifi_obytes;		/* total number of octets sent */
-	u_long	ifi_imcasts;		/* packets received via multicast */
-	u_long	ifi_omcasts;		/* packets sent via multicast */
-	u_long	ifi_iqdrops;		/* dropped on input, this interface */
-	u_long	ifi_noproto;		/* destined for unsupported protocol */
-	u_long	ifi_hwassist;		/* HW offload capabilities */
-	u_long	ifi_unused;		/* XXX was ifi_xmittiming */
-	struct	timeval ifi_lastchange;	/* time of last administrative change */
-};
-
-#define	IFF_UP		0x1		/* interface is up */
-#define	IFF_BROADCAST	0x2		/* broadcast address valid */
-#define	IFF_DEBUG	0x4		/* turn on debugging */
-#define	IFF_LOOPBACK	0x8		/* is a loopback net */
-#define	IFF_POINTOPOINT	0x10		/* interface is point-to-point link */
-#define	IFF_SMART	0x20		/* interface manages own routes */
-#define	IFF_RUNNING	0x40		/* resources allocated */
-#define	IFF_NOARP	0x80		/* no address resolution protocol */
-#define	IFF_PROMISC	0x100		/* receive all packets */
-#define	IFF_ALLMULTI	0x200		/* receive all multicast packets */
-#define	IFF_OACTIVE	0x400		/* transmission in progress */
-#define	IFF_SIMPLEX	0x800		/* can't hear own transmissions */
-#define	IFF_LINK0	0x1000		/* per link layer defined bit */
-#define	IFF_LINK1	0x2000		/* per link layer defined bit */
-#define	IFF_LINK2	0x4000		/* per link layer defined bit */
-#define	IFF_ALTPHYS	IFF_LINK2	/* use alternate physical connection */
-#define	IFF_MULTICAST	0x8000		/* supports multicast */
-
-/*
- * The following flag(s) ought to go in if_flags, but we cannot change
- * struct ifnet because of binary compatibility, so we store them in
- * if_ipending, which is not used so far.
- * If possible, make sure the value is not conflicting with other
- * IFF flags, so we have an easier time when we want to merge them.
- */
-#define	IFF_POLLING	0x10000		/* Interface is in polling mode. */
-
-/* flags set internally only: */
-#define	IFF_CANTCHANGE \
-	(IFF_BROADCAST|IFF_POINTOPOINT|IFF_RUNNING|IFF_OACTIVE|\
-	    IFF_SIMPLEX|IFF_MULTICAST|IFF_ALLMULTI|IFF_SMART)
-
-/* Capabilities that interfaces can advertise. */
-#define IFCAP_RXCSUM		0x0001  /* can offload checksum on RX */
-#define IFCAP_TXCSUM		0x0002  /* can offload checksum on TX */
-#define IFCAP_NETCONS		0x0004  /* can be a network console */
-
-#define IFCAP_HWCSUM		(IFCAP_RXCSUM | IFCAP_TXCSUM)
-
-#define	IFQ_MAXLEN	50
-#define	IFNET_SLOWHZ	1		/* granularity is 1 second */
-
-/*
- * Message format for use in obtaining information about interfaces
- * from getkerninfo and the routing socket
- */
-struct if_msghdr {
-	u_short	ifm_msglen;	/* to skip over non-understood messages */
-	u_char	ifm_version;	/* future binary compatibility */
-	u_char	ifm_type;	/* message type */
-	int	ifm_addrs;	/* like rtm_addrs */
-	int	ifm_flags;	/* value of if_flags */
-	u_short	ifm_index;	/* index for associated ifp */
-	struct	if_data ifm_data;/* statistics and other data about if */
-};
-
-/*
- * Message format for use in obtaining information about interface addresses
- * from getkerninfo and the routing socket
- */
-struct ifa_msghdr {
-	u_short	ifam_msglen;	/* to skip over non-understood messages */
-	u_char	ifam_version;	/* future binary compatibility */
-	u_char	ifam_type;	/* message type */
-	int	ifam_addrs;	/* like rtm_addrs */
-	int	ifam_flags;	/* value of ifa_flags */
-	u_short	ifam_index;	/* index for associated ifp */
-	int	ifam_metric;	/* value of ifa_metric */
-};
-
-/*
- * Message format for use in obtaining information about multicast addresses
- * from the routing socket
- */
-struct ifma_msghdr {
-	u_short	ifmam_msglen;	/* to skip over non-understood messages */
-	u_char	ifmam_version;	/* future binary compatibility */
-	u_char	ifmam_type;	/* message type */
-	int	ifmam_addrs;	/* like rtm_addrs */
-	int	ifmam_flags;	/* value of ifa_flags */
-	u_short	ifmam_index;	/* index for associated ifp */
-};
-
-/*
- * Message format announcing the arrival or departure of a network interface.
- */
-struct if_announcemsghdr {
-	u_short	ifan_msglen;	/* to skip over non-understood messages */
-	u_char	ifan_version;	/* future binary compatibility */
-	u_char	ifan_type;	/* message type */
-	u_short	ifan_index;	/* index for associated ifp */
-	char	ifan_name[IFNAMSIZ]; /* if name, e.g. "en0" */
-	u_short	ifan_what;	/* what type of announcement */
-};
-
-#define	IFAN_ARRIVAL	0	/* interface arrival */
-#define	IFAN_DEPARTURE	1	/* interface departure */
-
-/*
- * Interface request structure used for socket
- * ioctl's.  All interface ioctl's must have parameter
- * definitions which begin with ifr_name.  The
- * remainder may be interface specific.
- */
-struct	ifreq {
-	char	ifr_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	union {
-		struct	sockaddr ifru_addr;
-		struct	sockaddr ifru_dstaddr;
-		struct	sockaddr ifru_broadaddr;
-		short	ifru_flags[2];
-		short	ifru_index;
-		int	ifru_metric;
-		int	ifru_mtu;
-		int	ifru_phys;
-		int	ifru_media;
-		caddr_t	ifru_data;
-		int	ifru_cap[2];
-	} ifr_ifru;
-#define	ifr_addr	ifr_ifru.ifru_addr	/* address */
-#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-to-p link */
-#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address */
-#define	ifr_flags	ifr_ifru.ifru_flags[0]	/* flags */
-#define	ifr_prevflags	ifr_ifru.ifru_flags[1]	/* flags */
-#define	ifr_metric	ifr_ifru.ifru_metric	/* metric */
-#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu */
-#define ifr_phys	ifr_ifru.ifru_phys	/* physical wire */
-#define ifr_media	ifr_ifru.ifru_media	/* physical media */
-#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface */
-#define	ifr_reqcap	ifr_ifru.ifru_cap[0]	/* requested capabilities */
-#define	ifr_curcap	ifr_ifru.ifru_cap[1]	/* current capabilities */
-#define	ifr_index	ifr_ifru.ifru_index	/* interface index */
-};
-
-struct ifaliasreq {
-	char	ifra_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	struct	sockaddr ifra_addr;
-	struct	sockaddr ifra_broadaddr;
-	struct	sockaddr ifra_mask;
-};
-
-struct ifmediareq {
-	char	ifm_name[IFNAMSIZ];	/* if name, e.g. "en0" */
-	int	ifm_current;		/* current media options */
-	int	ifm_mask;		/* don't care mask */
-	int	ifm_status;		/* media status */
-	int	ifm_active;		/* active options */
-	int	ifm_count;		/* # entries in ifm_ulist array */
-	int	*ifm_ulist;		/* media words */
-};
-
-/* 
- * Structure used to retrieve aux status data from interfaces.
- * Kernel suppliers to this interface should respect the formatting
- * needed by ifconfig(8): each line starts with a TAB and ends with
- * a newline.  The canonical example to copy and paste is in if_tun.c.
- */
-
-#define	IFSTATMAX	800		/* 10 lines of text */
-struct ifstat {
-	char	ifs_name[IFNAMSIZ];	/* if name, e.g. "en0" */
-	char	ascii[IFSTATMAX + 1];
-};
-
-/*
- * Structure used in SIOCGIFCONF request.
- * Used to retrieve interface configuration
- * for machine (useful for programs which
- * must know all networks accessible).
- */
-struct	ifconf {
-	int	ifc_len;		/* size of associated buffer */
-	union {
-		caddr_t	ifcu_buf;
-		struct	ifreq *ifcu_req;
-	} ifc_ifcu;
-#define	ifc_buf	ifc_ifcu.ifcu_buf	/* buffer address */
-#define	ifc_req	ifc_ifcu.ifcu_req	/* array of structures returned */
-};
-
-
-/*
- * Structure for SIOC[AGD]LIFADDR
- */
-struct if_laddrreq {
-	char	iflr_name[IFNAMSIZ];
-	u_int	flags;
-#define	IFLR_PREFIX	0x8000  /* in: prefix given  out: kernel fills id */
-	u_int	prefixlen;         /* in/out */
-	struct	sockaddr_storage addr;   /* in/out */
-	struct	sockaddr_storage dstaddr; /* out */
-};
-
-#ifdef _KERNEL
-#ifdef MALLOC_DECLARE
-MALLOC_DECLARE(M_IFADDR);
-MALLOC_DECLARE(M_IFMADDR);
-#endif
-#endif
-
-#ifndef _KERNEL
-struct if_nameindex {
-	u_int	if_index;	/* 1, 2, ... */
-	char	*if_name;	/* null terminated name: "le0", ... */
-};
-
-__BEGIN_DECLS
-u_int	 if_nametoindex(const char *);
-char	*if_indextoname(u_int, char *);
-struct	 if_nameindex *if_nameindex(void);
-void	 if_freenameindex(struct if_nameindex *);
-__END_DECLS
-#endif
-
-#ifdef _KERNEL
-struct thread;
-
-/* XXX - this should go away soon. */
-#include <net/if_var.h>
-#endif
-
-#endif /* !_NET_IF_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_arc.h b/newlib/libc/sys/linux/include/net/if_arc.h
deleted file mode 100644
index 03db7f54a..000000000
--- a/newlib/libc/sys/linux/include/net/if_arc.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*	$NetBSD: if_arc.h,v 1.13 1999/11/19 20:41:19 thorpej Exp $	*/
-/* $FreeBSD: src/sys/net/if_arc.h,v 1.3 2002/03/19 21:54:16 alfred Exp $ */
-
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * from: NetBSD: if_ether.h,v 1.10 1994/06/29 06:37:55 cgd Exp
- *       @(#)if_ether.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NET_IF_ARC_H_
-#define _NET_IF_ARC_H_
-
-/*
- * Arcnet address - 1 octets
- * don't know who uses this.
- */
-struct arc_addr {
-	u_int8_t  arc_addr_octet[1];
-} __attribute__((__packed__));
-
-/*
- * Structure of a 2.5MB/s Arcnet header.
- * as given to interface code.
- */
-struct	arc_header {
-	u_int8_t  arc_shost;
-	u_int8_t  arc_dhost;
-	u_int8_t  arc_type;
-	/*
-	 * only present for newstyle encoding with LL fragmentation.
-	 * Don't use sizeof(anything), use ARC_HDR{,NEW}LEN instead.
-	 */
-	u_int8_t  arc_flag;
-	u_int16_t arc_seqid;
-
-	/*
-	 * only present in exception packets (arc_flag == 0xff)
-	 */
-	u_int8_t  arc_type2;	/* same as arc_type */
-	u_int8_t  arc_flag2;	/* real flag value */
-	u_int16_t arc_seqid2;	/* real seqid value */
-} __attribute__((__packed__));
-
-#define	ARC_ADDR_LEN		1
-
-#define	ARC_HDRLEN		3
-#define	ARC_HDRNEWLEN		6
-#define	ARC_HDRNEWLEN_EXC	10
-
-/* these lengths are data link layer length - 2*ARC_ADDR_LEN */
-#define	ARC_MIN_LEN		1
-#define	ARC_MIN_FORBID_LEN	254
-#define	ARC_MAX_FORBID_LEN	256
-#define	ARC_MAX_LEN		508
-
-
-/* RFC 1051 */
-#define	ARCTYPE_IP_OLD		240	/* IP protocol */
-#define	ARCTYPE_ARP_OLD		241	/* address resolution protocol */
-
-/* RFC 1201 */
-#define	ARCTYPE_IP		212	/* IP protocol */
-#define	ARCTYPE_ARP		213	/* address resolution protocol */
-#define	ARCTYPE_REVARP		214	/* reverse addr resolution protocol */
-
-#define	ARCTYPE_ATALK		221	/* Appletalk */
-#define	ARCTYPE_BANIAN		247	/* Banyan Vines */
-#define	ARCTYPE_IPX		250	/* Novell IPX */
-
-#define ARCTYPE_INET6		0xc4	/* IPng */
-#define ARCTYPE_DIAGNOSE	0x80	/* as per ANSI/ATA 878.1 */
-
-#define	ARCMTU			507
-#define	ARCMIN			0
-
-#define ARC_PHDS_MAXMTU		60480
-
-struct	arccom {
-	struct	  ifnet ac_if;		/* network-visible interface */
-
-	u_int16_t ac_seqid;		/* seq. id used by PHDS encap. */
-
-	u_int8_t  arc_shost;
-	u_int8_t  arc_dhost;
-	u_int8_t  arc_type;
-
-	u_int8_t  dummy0;
-	u_int16_t dummy1;
-	int sflag, fsflag, rsflag;
-	struct mbuf *curr_frag;
-
-	struct ac_frag {
-		u_int8_t  af_maxflag;	/* from first packet */
-		u_int8_t  af_lastseen;	/* last split flag seen */
-		u_int16_t af_seqid;
-		struct mbuf *af_packet;
-	} ac_fragtab[256];		/* indexed by sender ll address */
-};
-
-#ifdef _KERNEL
-extern u_int8_t arcbroadcastaddr;
-extern int arc_ipmtu;	/* XXX new ip only, no RFC 1051! */
-
-void	arc_ifattach(struct ifnet *, u_int8_t);
-void	arc_ifdetach(struct ifnet *);
-void	arc_storelladdr(struct ifnet *, u_int8_t);
-char	*arc_sprintf(u_int8_t *);
-int	arc_isphds(int);
-void	arc_input(struct ifnet *, struct mbuf *);
-int	arc_output(struct ifnet *, struct mbuf *,
-	    struct sockaddr *, struct rtentry *);
-int	arc_ioctl(struct ifnet *, int, caddr_t);
-
-void		arc_frag_init(struct ifnet *);
-struct mbuf *	arc_frag_next(struct ifnet *);
-#endif
-
-#endif /* _NET_IF_ARC_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_arp.h b/newlib/libc/sys/linux/include/net/if_arp.h
deleted file mode 100644
index bdcacbc4d..000000000
--- a/newlib/libc/sys/linux/include/net/if_arp.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (c) 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_arp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/if_arp.h,v 1.16 2001/10/14 20:17:52 fjoe Exp $
- */
-
-#ifndef _NET_IF_ARP_H_
-#define	_NET_IF_ARP_H_
-
-/*
- * Address Resolution Protocol.
- *
- * See RFC 826 for protocol description.  ARP packets are variable
- * in size; the arphdr structure defines the fixed-length portion.
- * Protocol type values are the same as those for 10 Mb/s Ethernet.
- * It is followed by the variable-sized fields ar_sha, arp_spa,
- * arp_tha and arp_tpa in that order, according to the lengths
- * specified.  Field names used correspond to RFC 826.
- */
-struct	arphdr {
-	u_short	ar_hrd;		/* format of hardware address */
-#define ARPHRD_ETHER 	1	/* ethernet hardware format */
-#define ARPHRD_IEEE802	6	/* token-ring hardware format */
-#define ARPHRD_ARCNET	7	/* arcnet hardware format */
-#define ARPHRD_FRELAY 	15	/* frame relay hardware format */
-	u_short	ar_pro;		/* format of protocol address */
-	u_char	ar_hln;		/* length of hardware address */
-	u_char	ar_pln;		/* length of protocol address */
-	u_short	ar_op;		/* one of: */
-#define	ARPOP_REQUEST	1	/* request to resolve address */
-#define	ARPOP_REPLY	2	/* response to previous request */
-#define	ARPOP_REVREQUEST 3	/* request protocol address given hardware */
-#define	ARPOP_REVREPLY	4	/* response giving protocol address */
-#define ARPOP_INVREQUEST 8 	/* request to identify peer */
-#define ARPOP_INVREPLY	9	/* response identifying peer */
-/*
- * The remaining fields are variable in size,
- * according to the sizes above.
- */
-#ifdef COMMENT_ONLY
-	u_char	ar_sha[];	/* sender hardware address */
-	u_char	ar_spa[];	/* sender protocol address */
-	u_char	ar_tha[];	/* target hardware address */
-	u_char	ar_tpa[];	/* target protocol address */
-#endif
-};
-
-#define ar_sha(ap)	(((caddr_t)((ap)+1)) +   0)
-#define ar_spa(ap)	(((caddr_t)((ap)+1)) +   (ap)->ar_hln)
-#define ar_tha(ap)	(((caddr_t)((ap)+1)) +   (ap)->ar_hln + (ap)->ar_pln)
-#define ar_tpa(ap)	(((caddr_t)((ap)+1)) + 2*(ap)->ar_hln + (ap)->ar_pln)
-
-#define arphdr_len2(ar_hln, ar_pln)					\
-	(sizeof(struct arphdr) + 2*(ar_hln) + 2*(ar_pln))
-#define arphdr_len(ap)	(arphdr_len2((ap)->ar_hln, (ap)->ar_pln))
-
-/*
- * ARP ioctl request
- */
-struct arpreq {
-	struct	sockaddr arp_pa;		/* protocol address */
-	struct	sockaddr arp_ha;		/* hardware address */
-	int	arp_flags;			/* flags */
-};
-/*  arp_flags and at_flags field values */
-#define	ATF_INUSE	0x01	/* entry in use */
-#define ATF_COM		0x02	/* completed entry (enaddr valid) */
-#define	ATF_PERM	0x04	/* permanent entry */
-#define	ATF_PUBL	0x08	/* publish entry (respond for other host) */
-#define	ATF_USETRAILERS	0x10	/* has requested trailers */
-
-#ifdef _KERNEL
-/*
- * Structure shared between the ethernet driver modules and
- * the address resolution code.  For example, each ec_softc or il_softc
- * begins with this structure.
- */
-struct	arpcom {
-	/*
-	 * The ifnet struct _must_ be at the head of this structure.
-	 */
-	struct 	ifnet ac_if;		/* network-visible interface */
-	u_char	ac_enaddr[6];		/* ethernet hardware address */
-	int	ac_multicnt;		/* length of ac_multiaddrs list */
-	void	*ac_netgraph;		/* ng_ether(4) netgraph node info */
-};
-
-extern u_char	etherbroadcastaddr[6];
-#endif
-
-#endif /* !_NET_IF_ARP_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_atm.h b/newlib/libc/sys/linux/include/net/if_atm.h
deleted file mode 100644
index c9ff107c0..000000000
--- a/newlib/libc/sys/linux/include/net/if_atm.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*      $NetBSD: if_atm.h,v 1.7 1996/11/09 23:02:27 chuck Exp $       */
-/* $FreeBSD: src/sys/net/if_atm.h,v 1.5 2002/03/19 21:54:16 alfred Exp $ */
-
-/*
- *
- * Copyright (c) 1996 Charles D. Cranor and Washington University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Charles D. Cranor and
- *	Washington University.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * net/if_atm.h
- */
-
-#if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__bsdi__)
-#define RTALLOC1(A,B)		rtalloc1((A),(B))
-#elif defined(__FreeBSD__)
-#define RTALLOC1(A,B)		rtalloc1((A),(B),0UL)
-#endif
-
-/*
- * pseudo header for packet transmission
- */
-struct atm_pseudohdr {
-  u_int8_t atm_ph[4];	/* flags+VPI+VCI1(msb)+VCI2(lsb) */
-};
-
-#define ATM_PH_FLAGS(X)	((X)->atm_ph[0])
-#define ATM_PH_VPI(X)	((X)->atm_ph[1])
-#define ATM_PH_VCI(X)	((((X)->atm_ph[2]) << 8) | ((X)->atm_ph[3]))
-#define ATM_PH_SETVCI(X,V) { \
-	(X)->atm_ph[2] = ((V) >> 8) & 0xff; \
-	(X)->atm_ph[3] = ((V) & 0xff); \
-}
-
-#define ATM_PH_AAL5    0x01	/* use AAL5? (0 == aal0) */
-#define ATM_PH_LLCSNAP 0x02	/* use the LLC SNAP encoding (iff aal5) */
-
-#define ATM_PH_DRIVER7  0x40	/* reserve for driver's use */
-#define ATM_PH_DRIVER8  0x80	/* reserve for driver's use */
-
-#define ATMMTU		9180	/* ATM MTU size for IP */
-				/* XXX: could be 9188 with LLC/SNAP according
-					to comer */
-
-/* user's ioctl hook for raw atm mode */
-#define SIOCRAWATM	_IOWR('a', 122, int)	/* set driver's raw mode */
-
-/* atm_pseudoioctl: turns on and off RX VCIs  [for internal use only!] */
-struct atm_pseudoioctl {
-  struct atm_pseudohdr aph;
-  void *rxhand;
-};
-#define SIOCATMENA	_IOWR('a', 123, struct atm_pseudoioctl) /* enable */
-#define SIOCATMDIS	_IOWR('a', 124, struct atm_pseudoioctl) /* disable */
-
-
-/*
- * XXX forget all the garbage in if_llc.h and do it the easy way
- */
-
-#define ATMLLC_HDR "\252\252\3\0\0\0"
-struct atmllc {
-  u_int8_t llchdr[6];	/* aa.aa.03.00.00.00 */
-  u_int8_t type[2];	/* "ethernet" type */
-};
-
-/* ATM_LLC macros: note type code in host byte order */
-#define ATM_LLC_TYPE(X) (((X)->type[0] << 8) | ((X)->type[1]))
-#define ATM_LLC_SETTYPE(X,V) { \
-	(X)->type[1] = ((V) >> 8) & 0xff; \
-	(X)->type[0] = ((V) & 0xff); \
-}
-
-#ifdef _KERNEL
-void	atm_ifattach(struct ifnet *);
-void	atm_input(struct ifnet *, struct atm_pseudohdr *,
-		struct mbuf *, void *);
-int	atm_output(struct ifnet *, struct mbuf *, struct sockaddr *, 
-		struct rtentry *);
-#endif
-
diff --git a/newlib/libc/sys/linux/include/net/if_dl.h b/newlib/libc/sys/linux/include/net/if_dl.h
deleted file mode 100644
index 2c1467196..000000000
--- a/newlib/libc/sys/linux/include/net/if_dl.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_dl.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/if_dl.h,v 1.12 2002/05/07 22:14:06 kbyanc Exp $
- */
-
-#ifndef _NET_IF_DL_H_
-#define _NET_IF_DL_H_
-
-/*
- * A Link-Level Sockaddr may specify the interface in one of two
- * ways: either by means of a system-provided index number (computed
- * anew and possibly differently on every reboot), or by a human-readable
- * string such as "il0" (for managerial convenience).
- *
- * Census taking actions, such as something akin to SIOCGCONF would return
- * both the index and the human name.
- *
- * High volume transactions (such as giving a link-level ``from'' address
- * in a recvfrom or recvmsg call) may be likely only to provide the indexed
- * form, (which requires fewer copy operations and less space).
- *
- * The form and interpretation  of the link-level address is purely a matter
- * of convention between the device driver and its consumers; however, it is
- * expected that all drivers for an interface of a given if_type will agree.
- */
-
-/*
- * Structure of a Link-Level sockaddr:
- */
-struct sockaddr_dl {
-	u_char	sdl_len;	/* Total length of sockaddr */
-	u_char	sdl_family;	/* AF_LINK */
-	u_short	sdl_index;	/* if != 0, system given index for interface */
-	u_char	sdl_type;	/* interface type */
-	u_char	sdl_nlen;	/* interface name length, no trailing 0 reqd. */
-	u_char	sdl_alen;	/* link level address length */
-	u_char	sdl_slen;	/* link layer selector length */
-	char	sdl_data[46];	/* minimum work area, can be larger;
-				   contains both if name and ll address */
-};
-
-#define LLADDR(s) ((caddr_t)((s)->sdl_data + (s)->sdl_nlen))
-
-#ifndef _KERNEL
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-void	link_addr(const char *, struct sockaddr_dl *);
-char	*link_ntoa(const struct sockaddr_dl *);
-__END_DECLS
-
-#endif /* !_KERNEL */
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/if_gif.h b/newlib/libc/sys/linux/include/net/if_gif.h
deleted file mode 100644
index 4cffb0872..000000000
--- a/newlib/libc/sys/linux/include/net/if_gif.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*	$FreeBSD: src/sys/net/if_gif.h,v 1.11 2002/03/24 09:34:04 bde Exp $	*/
-/*	$KAME: if_gif.h,v 1.17 2000/09/11 11:36:41 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * if_gif.h
- */
-
-#ifndef _NET_IF_GIF_H_
-#define _NET_IF_GIF_H_
-
-
-#ifdef _KERNEL
-#include "opt_inet.h"
-#include "opt_inet6.h"
-
-#include <netinet/in.h>
-/* xxx sigh, why route have struct route instead of pointer? */
-
-struct encaptab;
-
-extern	void (*ng_gif_input_p)(struct ifnet *ifp, struct mbuf **mp,
-		int af);
-extern	void (*ng_gif_input_orphan_p)(struct ifnet *ifp, struct mbuf *m,
-		int af);
-extern	int  (*ng_gif_output_p)(struct ifnet *ifp, struct mbuf **mp);
-extern	void (*ng_gif_attach_p)(struct ifnet *ifp);
-extern	void (*ng_gif_detach_p)(struct ifnet *ifp);
-
-struct gif_softc {
-	struct ifnet	gif_if;	   /* common area - must be at the top */
-	struct sockaddr	*gif_psrc; /* Physical src addr */
-	struct sockaddr	*gif_pdst; /* Physical dst addr */
-	union {
-		struct route  gifscr_ro;    /* xxx */
-#ifdef INET6
-		struct route_in6 gifscr_ro6; /* xxx */
-#endif
-	} gifsc_gifscr;
-	int		gif_flags;
-	const struct encaptab *encap_cookie4;
-	const struct encaptab *encap_cookie6;
-	void		*gif_netgraph;	/* ng_gif(4) netgraph node info */
-	LIST_ENTRY(gif_softc) gif_link; /* all gif's are linked */
-};
-
-#define gif_ro gifsc_gifscr.gifscr_ro
-#ifdef INET6
-#define gif_ro6 gifsc_gifscr.gifscr_ro6
-#endif
-
-#define GIF_MTU		(1280)	/* Default MTU */
-#define	GIF_MTU_MIN	(1280)	/* Minimum MTU */
-#define	GIF_MTU_MAX	(8192)	/* Maximum MTU */
-
-/* Prototypes */
-void gif_input(struct mbuf *, int, struct ifnet *);
-int gif_output(struct ifnet *, struct mbuf *, struct sockaddr *,
-	       struct rtentry *);
-int gif_ioctl(struct ifnet *, u_long, caddr_t);
-
-#endif /* _KERNEL */
-
-#endif /* _NET_IF_GIF_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_ieee80211.h b/newlib/libc/sys/linux/include/net/if_ieee80211.h
deleted file mode 100644
index 0757f9d43..000000000
--- a/newlib/libc/sys/linux/include/net/if_ieee80211.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*	$NetBSD: if_ieee80211.h,v 1.5 2000/07/21 04:47:40 onoe Exp $	*/
-/* $FreeBSD: src/sys/net/if_ieee80211.h,v 1.6 2002/04/11 05:43:10 imp Exp $ */
-
-#ifndef _NET_IF_IEEE80211_H_
-#define _NET_IF_IEEE80211_H_
-
-/*
- * generic definitions for IEEE 802.11 frames
- */
-struct ieee80211_frame {
-	u_int8_t	i_fc[2];
-	u_int8_t	i_dur[2];
-	u_int8_t	i_addr1[ETHER_ADDR_LEN];
-	u_int8_t	i_addr2[ETHER_ADDR_LEN];
-	u_int8_t	i_addr3[ETHER_ADDR_LEN];
-	u_int8_t	i_seq[2];
-	/* possibly followed by addr4[ETHER_ADDR_LEN]; */
-};
-
-#define	IEEE80211_FC0_VERSION_MASK		0x03
-#define	IEEE80211_FC0_VERSION_0			0x00
-#define	IEEE80211_FC0_TYPE_MASK			0x0c
-#define	IEEE80211_FC0_TYPE_MGT			0x00
-#define	IEEE80211_FC0_TYPE_CTL			0x04
-#define	IEEE80211_FC0_TYPE_DATA			0x08
-
-#define	IEEE80211_FC0_SUBTYPE_MASK		0xf0
-/* for TYPE_MGT */
-#define	IEEE80211_FC0_SUBTYPE_ASSOC_REQ		0x00
-#define	IEEE80211_FC0_SUBTYPE_ASSOC_RESP	0x10
-#define	IEEE80211_FC0_SUBTYPE_REASSOC_REQ	0x20
-#define	IEEE80211_FC0_SUBTYPE_REASSOC_RESP	0x30
-#define	IEEE80211_FC0_SUBTYPE_PROBE_REQ		0x40
-#define	IEEE80211_FC0_SUBTYPE_PROBE_RESP	0x50
-#define	IEEE80211_FC0_SUBTYPE_BEACON		0x80
-#define	IEEE80211_FC0_SUBTYPE_ATIM		0x90
-#define	IEEE80211_FC0_SUBTYPE_DISASSOC		0xa0
-#define	IEEE80211_FC0_SUBTYPE_AUTH		0xb0
-#define	IEEE80211_FC0_SUBTYPE_DEAUTH		0xc0
-/* for TYPE_CTL */
-#define	IEEE80211_FC0_SUBTYPE_PS_POLL		0xa0
-#define	IEEE80211_FC0_SUBTYPE_RTS		0xb0
-#define	IEEE80211_FC0_SUBTYPE_CTS		0xc0
-#define	IEEE80211_FC0_SUBTYPE_ACK		0xd0
-#define	IEEE80211_FC0_SUBTYPE_CF_END		0xe0
-#define	IEEE80211_FC0_SUBTYPE_CF_END_ACK	0xf0
-/* for TYPE_DATA (bit combination) */
-#define IEEE80211_FC0_SUBTYPE_DATA		0x00
-#define	IEEE80211_FC0_SUBTYPE_CF_ACK		0x10
-#define	IEEE80211_FC0_SUBTYPE_CF_POLL		0x20
-#define	IEEE80211_FC0_SUBTYPE_CF_ACPL		0x30
-#define	IEEE80211_FC0_SUBTYPE_NODATA		0x40
-#define	IEEE80211_FC0_SUBTYPE_CFACK		0x50
-#define	IEEE80211_FC0_SUBTYPE_CFPOLL		0x60
-#define	IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK	0x70
-
-#define	IEEE80211_FC1_DIR_MASK			0x03
-#define	IEEE80211_FC1_DIR_NODS			0x00	/* STA->STA */
-#define	IEEE80211_FC1_DIR_TODS			0x01	/* STA->AP  */
-#define	IEEE80211_FC1_DIR_FROMDS		0x02	/* AP ->STA */
-#define	IEEE80211_FC1_DIR_DSTODS		0x03	/* AP ->AP  */
-
-#define	IEEE80211_FC1_MORE_FRAG			0x04
-#define	IEEE80211_FC1_RETRY			0x08
-#define	IEEE80211_FC1_PWR_MGT			0x10
-#define	IEEE80211_FC1_MORE_DATA			0x20
-#define	IEEE80211_FC1_WEP			0x40
-#define	IEEE80211_FC1_ORDER			0x80
-
-#define	IEEE80211_NWID_LEN			32
-
-/*
- * BEACON management packets
- *
- *	octect timestamp[8]
- *	octect beacon interval[2]
- *	octect capability information[2]
- *	information element
- *		octect elemid
- *		octect length
- *		octect information[length[
- */
-typedef u_int8_t *	ieee80211_mgt_beacon_t;
-
-#define IEEE80211_BEACON_INTERVAL(beacon) \
-	(beacon[8] + (beacon[9] << 8))
-#define IEEE80211_BEACON_CAPABILITY(beacon) \
-	(beacon[10] + (beacon[11] << 8))
-
-#define	IEEE80211_CAPINFO_ESS			0x01
-#define	IEEE80211_CAPINFO_IBSS			0x02
-#define	IEEE80211_CAPINFO_CF_POLLABLE		0x04
-#define	IEEE80211_CAPINFO_CF_POLLREQ		0x08
-#define	IEEE80211_CAPINFO_PRIVACY		0x10
-
-
-/*
- * Management information elements
- */
-struct ieee80211_information {
-	char	ssid[IEEE80211_NWID_LEN+1];
-	struct rates {
-		u_int8_t 	*p;
-	} rates;
-	struct fh {
-		u_int16_t 	dwell;
-		u_int8_t 	set;
-		u_int8_t 	pattern;
-		u_int8_t 	index;
-	} fh;
-	struct ds {
-		u_int8_t	channel;
-	} ds;
-	struct cf {
-		u_int8_t	count;
-		u_int8_t	period;
-		u_int8_t	maxdur[2];
-		u_int8_t	dur[2];
-	} cf;
-	struct tim {
-		u_int8_t 	count;
-		u_int8_t 	period;
-		u_int8_t 	bitctl;
-		/* u_int8_t 	pvt[251]; The driver never needs to use this */
-	} tim;
-	struct ibss {
-	    	u_int16_t	atim;
-	} ibss;
-	struct challenge {
-		u_int8_t 	*p;
-		u_int8_t	len;
-	} challenge;
-};
-
-#define	IEEE80211_ELEMID_SSID			0
-#define	IEEE80211_ELEMID_RATES			1
-#define	IEEE80211_ELEMID_FHPARMS		2
-#define	IEEE80211_ELEMID_DSPARMS		3
-#define	IEEE80211_ELEMID_CFPARMS		4
-#define	IEEE80211_ELEMID_TIM			5
-#define	IEEE80211_ELEMID_IBSSPARMS		6
-#define	IEEE80211_ELEMID_CHALLENGE		16
-
-/*
- * AUTH management packets
- *
- *	octect algo[2]
- *	octect seq[2]
- *	octect status[2]
- *	octect chal.id
- *	octect chal.length
- *	octect chal.text[253]
- */
-typedef u_int8_t *	ieee80211_mgt_auth_t;
-
-#define IEEE80211_AUTH_ALGORITHM(auth) \
-    (auth[0] + (auth[1] << 8))
-#define IEEE80211_AUTH_TRANSACTION(auth) \
-    (auth[2] + (auth[3] << 8))
-#define IEEE80211_AUTH_STATUS(auth) \
-    (auth[4] + (auth[5] << 8))
-
-#define	IEEE80211_AUTH_ALG_OPEN			0x0000
-#define	IEEE80211_AUTH_ALG_SHARED		0x0001
-
-#define IEEE80211_AUTH_OPEN_REQUEST		1
-#define IEEE80211_AUTH_OPEN_RESPONSE		2
-
-#define IEEE80211_AUTH_SHARED_REQUEST		1
-#define IEEE80211_AUTH_SHARED_CHALLENGE		2
-#define IEEE80211_AUTH_SHARED_RESPONSE		3
-#define IEEE80211_AUTH_SHARED_PASS		4
-
-/*
- * Reason codes
- *
- * Unlisted codes are reserved
- */
-#define	IEEE80211_REASON_UNSPECIFIED		1
-#define	IEEE80211_REASON_AUTH_EXPIRE		2
-#define	IEEE80211_REASON_AUTH_LEAVE		3
-#define	IEEE80211_REASON_ASSOC_EXPIRE		4
-#define	IEEE80211_REASON_ASSOC_TOOMANY		5
-#define	IEEE80211_REASON_NOT_AUTHED		6  
-#define	IEEE80211_REASON_NOT_ASSOCED		7
-#define	IEEE80211_REASON_ASSOC_LEAVE		8
-#define	IEEE80211_REASON_ASSOC_NOT_AUTHED	9
-
-/*
- * Status code
- *
- * Unlisted codes are reserved
- */
-#define IEEE80211_STATUS_SUCCESS		0x0000
-#define	IEEE80211_STATUS_UNSPECIFIED		1
-#define	IEEE80211_STATUS_CAPINFO		10
-#define	IEEE80211_STATUS_NOT_ASSOCED		11
-#define	IEEE80211_STATUS_OTHER			12
-#define	IEEE80211_STATUS_ALG			13
-#define	IEEE80211_STATUS_SEQUENCE		14
-#define	IEEE80211_STATUS_CHALLENGE		15
-#define	IEEE80211_STATUS_TIMEOUT		16
-#define	IEEE80211_STATUS_TOO_MANY_STATIONS	17
-#define	IEEE80211_STATUS_RATES			18
-
-#define	IEEE80211_WEP_KEYLEN			5	/* 40bit */
-#define	IEEE80211_WEP_IVLEN			3	/* 24bit */
-#define	IEEE80211_WEP_KIDLEN			1	/* 1 octet */
-#define	IEEE80211_WEP_CRCLEN			4	/* CRC-32 */
-#define	IEEE80211_WEP_NKID			4	/* number of key ids */
-
-/* nwid is pointed at by ifr.ifr_data */
-struct ieee80211_nwid {
-	u_int8_t	i_len;
-	u_int8_t	i_nwid[IEEE80211_NWID_LEN];
-};
-
-#define	SIOCS80211NWID		_IOWR('i', 230, struct ifreq)
-#define	SIOCG80211NWID		_IOWR('i', 231, struct ifreq)
-
-/* the first member must be matched with struct ifreq */
-struct ieee80211_nwkey {
-	char		i_name[IFNAMSIZ];	/* if_name, e.g. "wi0" */
-	int		i_wepon;		/* wep enabled flag */
-	int		i_defkid;		/* default encrypt key id */
-	struct {
-		int		i_keylen;
-		u_int8_t	*i_keydat;
-	}		i_key[IEEE80211_WEP_NKID];
-};
-#define	SIOCS80211NWKEY		 _IOW('i', 232, struct ieee80211_nwkey)
-#define	SIOCG80211NWKEY		_IOWR('i', 233, struct ieee80211_nwkey)
-
-#define IEEE80211_WEP_NOSUP	-1
-#define IEEE80211_WEP_OFF	0
-#define IEEE80211_WEP_ON	1
-#define IEEE80211_WEP_MIXED	2
-
-#define IEEE80211_AUTH_NONE	0
-#define IEEE80211_AUTH_OPEN	1
-#define IEEE80211_AUTH_SHARED	2
-
-#define IEEE80211_POWERSAVE_NOSUP	-1
-#define IEEE80211_POWERSAVE_OFF		0
-#define IEEE80211_POWERSAVE_CAM		1
-#define IEEE80211_POWERSAVE_PSP		2
-#define IEEE80211_POWERSAVE_PSP_CAM	3
-#define IEEE80211_POWERSAVE_ON		IEEE80211_POWERSAVE_CAM
-
-/* the first member must be matched with struct ifreq */
-struct ieee80211req {
-	char		i_name[IFNAMSIZ];	/* if_name, e.g. "wi0" */
-	u_int16_t	i_type;			/* req type */
-	int16_t		i_val;			/* Index or simple value */
-	int16_t		i_len;			/* Index or simple value */
-	void		*i_data;		/* Extra data */
-};
-#define	SIOCS80211		 _IOW('i', 234, struct ieee80211req)
-#define	SIOCG80211		_IOWR('i', 235, struct ieee80211req)
-
-#define IEEE80211_IOC_SSID		1
-#define IEEE80211_IOC_NUMSSIDS		2
-#define IEEE80211_IOC_WEP		3
-#define IEEE80211_IOC_WEPKEY		4
-#define IEEE80211_IOC_NUMWEPKEYS	5
-#define IEEE80211_IOC_WEPTXKEY		6
-#define IEEE80211_IOC_AUTHMODE		7
-#define IEEE80211_IOC_STATIONNAME	8
-#define IEEE80211_IOC_CHANNEL		9
-#define IEEE80211_IOC_POWERSAVE		10
-#define IEEE80211_IOC_POWERSAVESLEEP	11
-
-#endif /* !_NET_IF_IEEE80211_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_llc.h b/newlib/libc/sys/linux/include/net/if_llc.h
deleted file mode 100644
index ec2b75b31..000000000
--- a/newlib/libc/sys/linux/include/net/if_llc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*	$NetBSD: if_llc.h,v 1.12 1999/11/19 20:41:19 thorpej Exp $	*/
-
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_llc.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/if_llc.h,v 1.8 2002/03/29 06:58:45 mdodd Exp $
- */
-
-#ifndef _NET_IF_LLC_H_
-#define _NET_IF_LLC_H_
-
-/*
- * IEEE 802.2 Link Level Control headers, for use in conjunction with
- * 802.{3,4,5} media access control methods.
- *
- * Headers here do not use bit fields due to shortcommings in many
- * compilers.
- */
-
-struct llc {
-	u_int8_t llc_dsap;
-	u_int8_t llc_ssap;
-	union {
-	    struct {
-		u_int8_t control;
-		u_int8_t format_id;
-		u_int8_t class;
-		u_int8_t window_x2;
-	    } type_u __attribute__((__packed__));
-	    struct {
-		u_int8_t num_snd_x2;
-		u_int8_t num_rcv_x2;
-	    } type_i __attribute__((__packed__));
-	    struct {
-		u_int8_t control;
-		u_int8_t num_rcv_x2;
-	    } type_s __attribute__((__packed__));
-	    struct {
-	        u_int8_t control;
-		/*
-		 * We cannot put the following fields in a structure because
-		 * the structure rounding might cause padding.
-		 */
-		u_int8_t frmr_rej_pdu0;
-		u_int8_t frmr_rej_pdu1;
-		u_int8_t frmr_control;
-		u_int8_t frmr_control_ext;
-		u_int8_t frmr_cause;
-	    } type_frmr __attribute__((__packed__));
-	    struct {
-		u_int8_t  control;
-		u_int8_t  org_code[3];
-		u_int16_t ether_type;
-	    } type_snap __attribute__((__packed__));
-	    struct {
-		u_int8_t control;
-		u_int8_t control_ext;
-	    } type_raw __attribute__((__packed__));
-	} llc_un /* XXX __attribute__((__packed__)) ??? */;
-} __attribute__((__packed__));
-
-struct frmrinfo {
-	u_int8_t frmr_rej_pdu0;
-	u_int8_t frmr_rej_pdu1;
-	u_int8_t frmr_control;
-	u_int8_t frmr_control_ext;
-	u_int8_t frmr_cause;
-} __attribute__((__packed__));
-
-#define	llc_control		llc_un.type_u.control
-#define	llc_control_ext		llc_un.type_raw.control_ext
-#define	llc_fid			llc_un.type_u.format_id
-#define	llc_class		llc_un.type_u.class
-#define	llc_window		llc_un.type_u.window_x2
-#define	llc_frmrinfo 		llc_un.type_frmr.frmr_rej_pdu0
-#define	llc_frmr_pdu0		llc_un.type_frmr.frmr_rej_pdu0
-#define	llc_frmr_pdu1		llc_un.type_frmr.frmr_rej_pdu1
-#define	llc_frmr_control	llc_un.type_frmr.frmr_control
-#define	llc_frmr_control_ext	llc_un.type_frmr.frmr_control_ext
-#define	llc_frmr_cause		llc_un.type_frmr.frmr_cause
-#define	llc_snap		llc_un.type_snap
-
-/*
- * Don't use sizeof(struct llc_un) for LLC header sizes
- */
-#define LLC_ISFRAMELEN 4
-#define LLC_UFRAMELEN  3
-#define LLC_FRMRLEN    7
-#define LLC_SNAPFRAMELEN 8
-
-/*
- * Unnumbered LLC format commands
- */
-#define LLC_UI		0x3
-#define LLC_UI_P	0x13
-#define LLC_DISC	0x43
-#define	LLC_DISC_P	0x53
-#define LLC_UA		0x63
-#define LLC_UA_P	0x73
-#define LLC_TEST	0xe3
-#define LLC_TEST_P	0xf3
-#define LLC_FRMR	0x87
-#define	LLC_FRMR_P	0x97
-#define LLC_DM		0x0f
-#define	LLC_DM_P	0x1f
-#define LLC_XID		0xaf
-#define LLC_XID_P	0xbf
-#define LLC_SABME	0x6f
-#define LLC_SABME_P	0x7f
-
-/*
- * Supervisory LLC commands
- */
-#define	LLC_RR		0x01
-#define	LLC_RNR		0x05
-#define	LLC_REJ		0x09
-
-/*
- * Info format - dummy only
- */
-#define	LLC_INFO	0x00
-
-/*
- * ISO PDTR 10178 contains among others
- */
-#define LLC_X25_LSAP	0x7e
-#define LLC_SNAP_LSAP	0xaa
-#define LLC_ISO_LSAP	0xfe
-
-#endif /* _NET_IF_LLC_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_media.h b/newlib/libc/sys/linux/include/net/if_media.h
deleted file mode 100644
index 80599bdc0..000000000
--- a/newlib/libc/sys/linux/include/net/if_media.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*	$NetBSD: if_media.h,v 1.3 1997/03/26 01:19:27 thorpej Exp $	*/
-/* $FreeBSD: src/sys/net/if_media.h,v 1.17 2002/05/07 18:16:39 imp Exp $ */
-
-/*
- * Copyright (c) 1997
- *	Jonathan Stone and Jason R. Thorpe.  All rights reserved.
- *
- * This software is derived from information provided by Matt Thomas.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Jonathan Stone
- *	and Jason R. Thorpe for the NetBSD Project.
- * 4. The names of the authors may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NET_IF_MEDIA_H_
-#define _NET_IF_MEDIA_H_
-
-/*
- * Prototypes and definitions for BSD/OS-compatible network interface
- * media selection.
- *
- * Where it is safe to do so, this code strays slightly from the BSD/OS
- * design.  Software which uses the API (device drivers, basically)
- * shouldn't notice any difference.
- *
- * Many thanks to Matt Thomas for providing the information necessary
- * to implement this interface.
- */
-
-#ifdef _KERNEL
-
-#include <sys/queue.h>
-
-/*
- * Driver callbacks for media status and change requests.
- */
-typedef	int (*ifm_change_cb_t)(struct ifnet *ifp);
-typedef	void (*ifm_stat_cb_t)(struct ifnet *ifp, struct ifmediareq *req);
-
-/*
- * In-kernel representation of a single supported media type.
- */
-struct ifmedia_entry {
-	LIST_ENTRY(ifmedia_entry) ifm_list;
-	int	ifm_media;	/* description of this media attachment */
-	int	ifm_data;	/* for driver-specific use */
-	void	*ifm_aux;	/* for driver-specific use */
-};
-
-/*
- * One of these goes into a network interface's softc structure.
- * It is used to keep general media state.
- */
-struct ifmedia {
-	int	ifm_mask;	/* mask of changes we don't care about */
-	int	ifm_media;	/* current user-set media word */
-	struct ifmedia_entry *ifm_cur;	/* currently selected media */
-	LIST_HEAD(, ifmedia_entry) ifm_list; /* list of all supported media */
-	ifm_change_cb_t	ifm_change;	/* media change driver callback */
-	ifm_stat_cb_t	ifm_status;	/* media status driver callback */
-};
-
-/* Initialize an interface's struct if_media field. */
-void	ifmedia_init(struct ifmedia *ifm, int dontcare_mask,
-	    ifm_change_cb_t change_callback, ifm_stat_cb_t status_callback);
-
-/* Remove all mediums from a struct ifmedia.  */
-void	ifmedia_removeall( struct ifmedia *ifm);
-
-/* Add one supported medium to a struct ifmedia. */
-void	ifmedia_add(struct ifmedia *ifm, int mword, int data, void *aux);
-
-/* Add an array (of ifmedia_entry) media to a struct ifmedia. */
-void	ifmedia_list_add(struct ifmedia *mp, struct ifmedia_entry *lp,
-	    int count);
-
-/* Set default media type on initialization. */
-void	ifmedia_set(struct ifmedia *ifm, int mword);
-
-/* Common ioctl function for getting/setting media, called by driver. */
-int	ifmedia_ioctl(struct ifnet *ifp, struct ifreq *ifr,
-	    struct ifmedia *ifm, u_long cmd);
-
-#endif /*_KERNEL */
-
-/*
- * if_media Options word:
- *	Bits	Use
- *	----	-------
- *	0-4	Media variant
- *	5-7	Media type
- *	8-15	Type specific options
- *	16-19	RFU
- *	20-27	Shared (global) options
- *	28-31	Instance
- */
-
-/*
- * Ethernet
- */
-#define	IFM_ETHER	0x00000020
-#define	IFM_10_T	3		/* 10BaseT - RJ45 */
-#define	IFM_10_2	4		/* 10Base2 - Thinnet */
-#define	IFM_10_5	5		/* 10Base5 - AUI */
-#define	IFM_100_TX	6		/* 100BaseTX - RJ45 */
-#define	IFM_100_FX	7		/* 100BaseFX - Fiber */
-#define	IFM_100_T4	8		/* 100BaseT4 - 4 pair cat 3 */
-#define	IFM_100_VG	9		/* 100VG-AnyLAN */
-#define	IFM_100_T2	10		/* 100BaseT2 */
-#define	IFM_1000_SX	11		/* 1000BaseSX - multi-mode fiber */
-#define	IFM_10_STP	12		/* 10BaseT over shielded TP */
-#define	IFM_10_FL	13		/* 10BaseFL - Fiber */
-#define	IFM_1000_LX	14		/* 1000baseLX - single-mode fiber */
-#define	IFM_1000_CX	15		/* 1000baseCX - 150ohm STP */
-#define	IFM_1000_T	16		/* 1000baseT - 4 pair cat 5 */
-#define	IFM_HPNA_1	17		/* HomePNA 1.0 (1Mb/s) */
-/* note 31 is the max! */
-
-#define	IFM_ETH_MASTER	0x00000100	/* master mode (1000baseT) */
-
-/*
- * Token ring
- */
-#define	IFM_TOKEN	0x00000040
-#define	IFM_TOK_STP4	3		/* Shielded twisted pair 4m - DB9 */
-#define	IFM_TOK_STP16	4		/* Shielded twisted pair 16m - DB9 */
-#define	IFM_TOK_UTP4	5		/* Unshielded twisted pair 4m - RJ45 */
-#define	IFM_TOK_UTP16	6		/* Unshielded twisted pair 16m - RJ45 */
-#define	IFM_TOK_STP100  7		/* Shielded twisted pair 100m - DB9 */
-#define	IFM_TOK_UTP100  8		/* Unshielded twisted pair 100m - RJ45 */
-#define	IFM_TOK_ETR	0x00000200	/* Early token release */
-#define	IFM_TOK_SRCRT	0x00000400	/* Enable source routing features */
-#define	IFM_TOK_ALLR	0x00000800	/* All routes / Single route bcast */
-#define	IFM_TOK_DTR	0x00002000	/* Dedicated token ring */
-#define	IFM_TOK_CLASSIC	0x00004000	/* Classic token ring */
-#define	IFM_TOK_AUTO	0x00008000	/* Automatic Dedicate/Classic token ring */
-
-/*
- * FDDI
- */
-#define	IFM_FDDI	0x00000060
-#define	IFM_FDDI_SMF	3		/* Single-mode fiber */
-#define	IFM_FDDI_MMF	4		/* Multi-mode fiber */
-#define	IFM_FDDI_UTP	5		/* CDDI / UTP */
-#define	IFM_FDDI_DA	0x00000100	/* Dual attach / single attach */
-
-/*
- * IEEE 802.11 Wireless
- */
-#define	IFM_IEEE80211	0x00000080
-#define	IFM_IEEE80211_FH1	3	/* Frequency Hopping 1Mbps */
-#define	IFM_IEEE80211_FH2	4	/* Frequency Hopping 2Mbps */
-#define	IFM_IEEE80211_DS1	5	/* Direct Sequence 1Mbps */
-#define	IFM_IEEE80211_DS2	6	/* Direct Sequence 2Mbps */
-#define	IFM_IEEE80211_DS5	7	/* Direct Sequence 5.5Mbps */
-#define	IFM_IEEE80211_DS11	8	/* Direct Sequence 11Mbps */
-#define	IFM_IEEE80211_DS22	9	/* Direct Sequence 22Mbps */
-#define	IFM_IEEE80211_ADHOC	0x00000100	/* Operate in Adhoc mode */
-#define	IFM_IEEE80211_HOSTAP	0x00000200	/* Operate in Host AP mode */
-#define	IFM_IEEE80211_IBSS	0x00000400	/* Operate in IBSS mode */
-#define	IFM_IEEE80211_IBSSMASTER 0x00000800	/* Operate as an IBSS master */
-
-/*
- * Shared media sub-types
- */
-#define	IFM_AUTO	0		/* Autoselect best media */
-#define	IFM_MANUAL	1		/* Jumper/dipswitch selects media */
-#define	IFM_NONE	2		/* Deselect all media */
-
-/*
- * Shared options
- */
-#define	IFM_FDX		0x00100000	/* Force full duplex */
-#define	IFM_HDX		0x00200000	/* Force half duplex */
-#define	IFM_FLAG0	0x01000000	/* Driver defined flag */
-#define	IFM_FLAG1	0x02000000	/* Driver defined flag */
-#define	IFM_FLAG2	0x04000000	/* Driver defined flag */
-#define	IFM_LOOP	0x08000000	/* Put hardware in loopback */
-
-/*
- * Masks
- */
-#define	IFM_NMASK	0x000000e0	/* Network type */
-#define	IFM_TMASK	0x0000001f	/* Media sub-type */
-#define	IFM_IMASK	0xf0000000	/* Instance */
-#define	IFM_ISHIFT	28		/* Instance shift */
-#define	IFM_OMASK	0x0000ff00	/* Type specific options */
-#define	IFM_GMASK	0x0ff00000	/* Global options */
-
-/*
- * Status bits
- */
-#define	IFM_AVALID	0x00000001	/* Active bit valid */
-#define	IFM_ACTIVE	0x00000002	/* Interface attached to working net */
-
-/*
- * Macros to extract various bits of information from the media word.
- */
-#define	IFM_TYPE(x)         ((x) & IFM_NMASK)
-#define	IFM_SUBTYPE(x)      ((x) & IFM_TMASK)
-#define	IFM_TYPE_OPTIONS(x) ((x) & IFM_OMASK)
-#define	IFM_INST(x)         (((x) & IFM_IMASK) >> IFM_ISHIFT)
-#define	IFM_OPTIONS(x)	((x) & (IFM_OMASK|IFM_GMASK))
-
-#define	IFM_INST_MAX	IFM_INST(IFM_IMASK)
-
-/*
- * Macro to create a media word.
- */
-#define	IFM_MAKEWORD(type, subtype, options, instance)			\
-	((type) | (subtype) | (options) | ((instance) << IFM_ISHIFT))
-
-/*
- * NetBSD extension not defined in the BSDI API.  This is used in various
- * places to get the canonical description for a given type/subtype.
- *
- * NOTE: all but the top-level type descriptions must contain NO whitespace!
- * Otherwise, parsing these in ifconfig(8) would be a nightmare.
- */
-struct ifmedia_description {
-	int	ifmt_word;		/* word value; may be masked */
-	const char *ifmt_string;	/* description */
-};
-
-#define	IFM_TYPE_DESCRIPTIONS {						\
-	{ IFM_ETHER,		"Ethernet" },				\
-	{ IFM_TOKEN,		"Token ring" },				\
-	{ IFM_FDDI,		"FDDI" },				\
-	{ IFM_IEEE80211,	"IEEE 802.11 Wireless Ethernet" },	\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_ETHERNET_DESCRIPTIONS {				\
-	{ IFM_10_T,	"10baseT/UTP" },				\
-	{ IFM_10_2,	"10base2/BNC" },				\
-	{ IFM_10_5,	"10base5/AUI" },				\
-	{ IFM_100_TX,	"100baseTX" },					\
-	{ IFM_100_FX,	"100baseFX" },					\
-	{ IFM_100_T4,	"100baseT4" },					\
-	{ IFM_100_VG,	"100baseVG" },					\
-	{ IFM_100_T2,	"100baseT2" },					\
-	{ IFM_10_STP,	"10baseSTP" },					\
-	{ IFM_10_FL,	"10baseFL" },					\
-	{ IFM_1000_SX,	"1000baseSX" },					\
-	{ IFM_1000_LX,	"1000baseLX" },					\
-	{ IFM_1000_CX,	"1000baseCX" },					\
-	{ IFM_1000_T,	"1000baseTX" },					\
-	{ IFM_1000_T,	"1000baseT" },					\
-	{ IFM_HPNA_1,	"homePNA" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_ETHERNET_ALIASES {					\
-	{ IFM_10_T,	"UTP" },					\
-	{ IFM_10_T,	"10UTP" },					\
-	{ IFM_10_2,	"BNC" },					\
-	{ IFM_10_2,	"10BNC" },					\
-	{ IFM_10_5,	"AUI" },					\
-	{ IFM_10_5,	"10AUI" },					\
-	{ IFM_100_TX,	"100TX" },					\
-	{ IFM_100_T4,	"100T4" },					\
-	{ IFM_100_VG,	"100VG" },					\
-	{ IFM_100_T2,	"100T2" },					\
-	{ IFM_10_STP,	"10STP" },					\
-	{ IFM_10_FL,	"10FL" },					\
-	{ IFM_1000_SX,	"1000SX" },					\
-	{ IFM_1000_LX,	"1000LX" },					\
-	{ IFM_1000_CX,	"1000CX" },					\
-	{ IFM_1000_T,	"1000TX" },					\
-	{ IFM_1000_T,	"1000T" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS {			\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_TOKENRING_DESCRIPTIONS {				\
-	{ IFM_TOK_STP4,	"DB9/4Mbit" },					\
-	{ IFM_TOK_STP16, "DB9/16Mbit" },				\
-	{ IFM_TOK_UTP4,	"UTP/4Mbit" },					\
-	{ IFM_TOK_UTP16, "UTP/16Mbit" },				\
-	{ IFM_TOK_STP100, "STP/100Mbit" },				\
-	{ IFM_TOK_UTP100, "UTP/100Mbit" },				\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_TOKENRING_ALIASES {					\
-	{ IFM_TOK_STP4,	"4STP" },					\
-	{ IFM_TOK_STP16, "16STP" },					\
-	{ IFM_TOK_UTP4,	"4UTP" },					\
-	{ IFM_TOK_UTP16, "16UTP" },					\
-	{ IFM_TOK_STP100, "100STP" },					\
-	{ IFM_TOK_UTP100, "100UTP" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_TOKENRING_OPTION_DESCRIPTIONS {			\
-	{ IFM_TOK_ETR,	"EarlyTokenRelease" },				\
-	{ IFM_TOK_SRCRT, "SourceRouting" },				\
-	{ IFM_TOK_ALLR,	"AllRoutes" },					\
-	{ IFM_TOK_DTR,	"Dedicated" },					\
-	{ IFM_TOK_CLASSIC,"Classic" },					\
-	{ IFM_TOK_AUTO,	" " },						\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_FDDI_DESCRIPTIONS {					\
-	{ IFM_FDDI_SMF, "Single-mode" },				\
-	{ IFM_FDDI_MMF, "Multi-mode" },					\
-	{ IFM_FDDI_UTP, "UTP" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_FDDI_ALIASES {					\
-	{ IFM_FDDI_SMF,	"SMF" },					\
-	{ IFM_FDDI_MMF,	"MMF" },					\
-	{ IFM_FDDI_UTP,	"CDDI" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_FDDI_OPTION_DESCRIPTIONS {				\
-	{ IFM_FDDI_DA, "Dual-attach" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_IEEE80211_DESCRIPTIONS {				\
-	{ IFM_IEEE80211_FH1, "FH/1Mbps" },				\
-	{ IFM_IEEE80211_FH2, "FH/2Mbps" },				\
-	{ IFM_IEEE80211_DS1, "DS/1Mbps" },				\
-	{ IFM_IEEE80211_DS2, "DS/2Mbps" },				\
-	{ IFM_IEEE80211_DS5, "DS/5.5Mbps" },				\
-	{ IFM_IEEE80211_DS11, "DS/11Mbps" },				\
-	{ IFM_IEEE80211_DS22, "DS/22Mbps" },				\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_IEEE80211_ALIASES {					\
-	{ IFM_IEEE80211_FH1, "FH1" },					\
-	{ IFM_IEEE80211_FH2, "FH2" },					\
-	{ IFM_IEEE80211_FH1, "FrequencyHopping/1Mbps" },		\
-	{ IFM_IEEE80211_FH2, "FrequencyHopping/2Mbps" },		\
-	{ IFM_IEEE80211_DS1, "DS1" },					\
-	{ IFM_IEEE80211_DS2, "DS2" },					\
-	{ IFM_IEEE80211_DS5, "DS5.5" },					\
-	{ IFM_IEEE80211_DS11, "DS11" },					\
-	{ IFM_IEEE80211_DS22, "DS22" },					\
-	{ IFM_IEEE80211_DS1, "DirectSequence/1Mbps" },			\
-	{ IFM_IEEE80211_DS2, "DirectSequence/2Mbps" },			\
-	{ IFM_IEEE80211_DS5, "DirectSequence/5.5Mbps" },		\
-	{ IFM_IEEE80211_DS11, "DirectSequence/11Mbps" },		\
-	{ IFM_IEEE80211_DS22, "DirectSequence/22Mbps" },		\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_IEEE80211_OPTION_DESCRIPTIONS {			\
-	{ IFM_IEEE80211_ADHOC, "adhoc" },				\
-	{ IFM_IEEE80211_HOSTAP, "hostap" },				\
-	{ IFM_IEEE80211_IBSS, "ibss" },					\
-	{ IFM_IEEE80211_IBSSMASTER, "ibss-master" },			\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_SHARED_DESCRIPTIONS {				\
-	{ IFM_AUTO,	"autoselect" },					\
-	{ IFM_MANUAL,	"manual" },					\
-	{ IFM_NONE,	"none" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SUBTYPE_SHARED_ALIASES {					\
-	{ IFM_AUTO,	"auto" },					\
-	{ 0, NULL },							\
-}
-
-#define	IFM_SHARED_OPTION_DESCRIPTIONS {				\
-	{ IFM_FDX,	"full-duplex" },				\
-	{ IFM_HDX,	"half-duplex" },				\
-	{ IFM_FLAG0,	"flag0" },					\
-	{ IFM_FLAG1,	"flag1" },					\
-	{ IFM_FLAG2,	"flag2" },					\
-	{ IFM_LOOP,	"hw-loopback" },				\
-	{ 0, NULL },							\
-}
-
-#endif	/* _NET_IF_MEDIA_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_mib.h b/newlib/libc/sys/linux/include/net/if_mib.h
deleted file mode 100644
index b1a7bcfd5..000000000
--- a/newlib/libc/sys/linux/include/net/if_mib.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright 1996 Massachusetts Institute of Technology
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby
- * granted, provided that both the above copyright notice and this
- * permission notice appear in all copies, that both the above
- * copyright notice and this permission notice appear in all
- * supporting documentation, and that the name of M.I.T. not be used
- * in advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.  M.I.T. makes
- * no representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied
- * warranty.
- * 
- * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''.  M.I.T. DISCLAIMS
- * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
- * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/if_mib.h,v 1.6 1999/08/28 00:48:19 peter Exp $
- */
-
-#ifndef _NET_IF_MIB_H
-#define	_NET_IF_MIB_H	1
-
-struct ifmibdata {
-	char	ifmd_name[IFNAMSIZ]; /* name of interface */
-	int	ifmd_pcount;	/* number of promiscuous listeners */
-	int	ifmd_flags;	/* interface flags */
-	int	ifmd_snd_len;	/* instantaneous length of send queue */
-	int	ifmd_snd_maxlen; /* maximum length of send queue */
-	int	ifmd_snd_drops;	/* number of drops in send queue */
-	int	ifmd_filler[4];	/* for future expansion */
-	struct	if_data ifmd_data; /* generic information and statistics */
-};
-
-/*
- * sysctl MIB tags at the net.link.generic level
- */
-#define	IFMIB_SYSTEM	1	/* non-interface-specific */
-#define	IFMIB_IFDATA	2	/* per-interface data table */
-
-/*
- * MIB tags for the various net.link.generic.ifdata tables
- */
-#define	IFDATA_GENERAL	1	/* generic stats for all kinds of ifaces */
-#define	IFDATA_LINKSPECIFIC	2 /* specific to the type of interface */
-
-/*
- * MIB tags at the net.link.generic.system level
- */
-#define	IFMIB_IFCOUNT	1	/* number of interfaces configured */
-
-/*
- * MIB tags as the net.link level
- * All of the other values are IFT_* names defined in if_types.h.
- */
-#define	NETLINK_GENERIC	0	/* functions not specific to a type of iface */
-
-/*
- * The reason why the IFDATA_LINKSPECIFIC stuff is not under the
- * net.link.<iftype> branches is twofold:
- *   1) It's easier to code this way, and doesn't require duplication.
- *   2) The fourth level under net.link.<iftype> is <pf>; that is to say,
- *	the net.link.<iftype> tree instruments the adaptation layers between
- *	<iftype> and a particular protocol family (e.g., net.link.ether.inet
- *	instruments ARP).  This does not really leave room for anything else
- *	that needs to have a well-known number.
- */
-
-/*
- * Link-specific MIB structures for various link types.
- */
-
-/* For IFT_ETHER, IFT_ISO88023, and IFT_STARLAN, as used by RFC 1650 */
-struct ifmib_iso_8802_3 {
-	u_int32_t	dot3StatsAlignmentErrors;
-	u_int32_t	dot3StatsFCSErrors;
-	u_int32_t	dot3StatsSingleCollisionFrames;
-	u_int32_t	dot3StatsMultipleCollisionFrames;
-	u_int32_t	dot3StatsSQETestErrors;
-	u_int32_t	dot3StatsDeferredTransmissions;
-	u_int32_t	dot3StatsLateCollisions;
-	u_int32_t	dot3StatsExcessiveCollisions;
-	u_int32_t	dot3StatsInternalMacTransmitErrors;
-	u_int32_t	dot3StatsCarrierSenseErrors;
-	u_int32_t	dot3StatsFrameTooLongs;
-	u_int32_t	dot3StatsInternalMacReceiveErrors;
-	u_int32_t	dot3StatsEtherChipSet;
-	/* Matt Thomas wants this one, not included in RFC 1650: */
-	u_int32_t	dot3StatsMissedFrames;
-
-	u_int32_t	dot3StatsCollFrequencies[16]; /* NB: index origin */
-
-	u_int32_t	dot3Compliance;
-#define	DOT3COMPLIANCE_STATS	1
-#define	DOT3COMPLIANCE_COLLS	2
-};
-
-/*
- * Chipset identifiers are normally part of the vendor's enterprise MIB.
- * However, we don't want to be trying to represent arbitrary-length
- * OBJECT IDENTIFIERs here (ick!), and the right value is not necessarily
- * obvious to the driver implementor.  So, we define our own identification
- * mechanism here, and let the agent writer deal with the translation.
- */
-#define	DOT3CHIPSET_VENDOR(x)	((x) >> 16)
-#define	DOT3CHIPSET_PART(x)	((x) & 0xffff)
-#define	DOT3CHIPSET(v,p)	(((v) << 16) + ((p) & 0xffff))
-
-/* Driver writers!  Add your vendors here! */
-enum dot3Vendors {
-	dot3VendorAMD = 1,
-	dot3VendorIntel = 2,
-	dot3VendorNational = 4,
-	dot3VendorFujitsu = 5,
-	dot3VendorDigital = 6,
-	dot3VendorWesternDigital = 7
-};
-
-/* Driver writers!  Add your chipsets here! */
-enum {
-	dot3ChipSetAMD7990 = 1,
-	dot3ChipSetAMD79900 = 2,
-	dot3ChipSetAMD79C940 = 3
-};
-
-enum {
-	dot3ChipSetIntel82586 = 1,
-	dot3ChipSetIntel82596 = 2,
-	dot3ChipSetIntel82557 = 3
-};
-
-enum {
-	dot3ChipSetNational8390 = 1,
-	dot3ChipSetNationalSonic = 2
-};
-
-enum {
-	dot3ChipSetFujitsu86950 = 1
-};
-
-enum {
-	dot3ChipSetDigitalDC21040 = 1,
-	dot3ChipSetDigitalDC21140 = 2,
-	dot3ChipSetDigitalDC21041 = 3,
-	dot3ChipSetDigitalDC21140A = 4,
-	dot3ChipSetDigitalDC21142 = 5
-};
-
-enum {
-	dot3ChipSetWesternDigital83C690 = 1,
-	dot3ChipSetWesternDigital83C790 = 2
-};
-/* END of Ethernet-link MIB stuff */
-
-/*
- * Put other types of interface MIBs here, or in interface-specific
- * header files if convenient ones already exist.
- */
-#endif /* _NET_IF_MIB_H */
diff --git a/newlib/libc/sys/linux/include/net/if_ppp.h b/newlib/libc/sys/linux/include/net/if_ppp.h
deleted file mode 100644
index 0d4b6078f..000000000
--- a/newlib/libc/sys/linux/include/net/if_ppp.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $FreeBSD: src/sys/net/if_ppp.h,v 1.14 1999/08/28 00:48:20 peter Exp $
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/* XXX this used to be self-contained. */
-#include <net/ppp_defs.h>
-#include <net/if.h>
-
-/*
- * Packet sizes
- */
-#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
-#define PPP_MAXMRU	65000	/* Largest MRU we allow */
-#define PPP_MAXMTU	16384	/* Largest MTU we allow */
-
-/*
- * Bit definitions for flags.
- */
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define	SC_MASK		0x0fff00ff	/* bits that user can change */
-
-/*
- * State bits in sc_flags, not changeable by user.
- */
-#define SC_TIMEOUT	0x00000400	/* timeout is currently pending */
-#define SC_VJ_RESET	0x00000800	/* need to reset VJ decomp */
-#define SC_COMP_RUN	0x00001000	/* compressor has been initiated */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been initiated */
-#define SC_DC_ERROR	0x00004000	/* non-fatal decomp error detected */
-#define SC_DC_FERROR	0x00008000	/* fatal decomp error detected */
-#define SC_TBUSY	0x10000000	/* xmitter doesn't need a packet yet */
-#define SC_PKTLOST	0x20000000	/* have lost or dropped a packet */
-#define	SC_FLUSH	0x40000000	/* flush input until next PPP_FLAG */
-#define	SC_ESCAPED	0x80000000	/* saw a PPP_ESCAPE */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
-    int		protocol;	/* PPP procotol, e.g. PPP_IP */
-    enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	u_char	*ptr;
-	u_int	length;
-	int	transmit;
-};
-
-struct ifpppstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_stats stats;
-};
-
-struct ifpppcstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_comp_stats stats;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCGIDLE	_IOR('t', 74, struct ppp_idle) /* get idle time */
-#define PPPIOCSPASS	_IOW('t', 71, struct bpf_program) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct bpf_program) /* set active filt */
-
-/* PPPIOC[GS]MTU are alternatives to SIOC[GS]IFMTU, used under Ultrix */
-#define PPPIOCGMTU	_IOR('t', 73, int)	/* get interface MTU */
-#define PPPIOCSMTU	_IOW('t', 72, int)	/* set interface MTU */
-
-/*
- * These two are interface ioctls so that pppstats can do them on
- * a socket without having to open the serial device.
- */
-#define SIOCGPPPSTATS	_IOWR('i', 123, struct ifpppstatsreq)
-#define SIOCGPPPCSTATS	_IOWR('i', 122, struct ifpppcstatsreq)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu	ifr_ifru.ifru_metric
-#endif
-
-#endif /* _IF_PPP_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_pppvar.h b/newlib/libc/sys/linux/include/net/if_pppvar.h
deleted file mode 100644
index b4380f4ec..000000000
--- a/newlib/libc/sys/linux/include/net/if_pppvar.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * if_pppvar.h - private structures and declarations for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $FreeBSD: src/sys/net/if_pppvar.h,v 1.19 2002/03/24 09:34:04 bde Exp $
- */
-
-/*
- * Supported network protocols.  These values are used for
- * indexing sc_npmode.
- */
-#define NP_IP	0		/* Internet Protocol */
-#define NUM_NP	1		/* Number of NPs. */
-
-/*
- * Structure describing each ppp unit.
- */
-struct ppp_softc {
-	struct	ifnet sc_if;		/* network-visible interface */
-/*hi*/	u_int	sc_flags;		/* control/status bits; see if_ppp.h */
-	struct	callout_handle sc_ch;	/* Used for scheduling timeouts */
-	void	*sc_devp;		/* pointer to device-dep structure */
-	void	(*sc_start)(struct ppp_softc *);	/* start output proc */
-	void	(*sc_ctlp)(struct ppp_softc *); /* rcvd control pkt */
-	void	(*sc_relinq)(struct ppp_softc *); /* relinquish ifunit */
-	void	(*sc_setmtu)(struct ppp_softc *); /* set mtu */
-	short	sc_mru;			/* max receive unit */
-	pid_t	sc_xfer;		/* used in transferring unit */
-/*hi*/	struct	ifqueue sc_rawq;	/* received packets */
-/*net*/	struct	ifqueue sc_inq;		/* queue of input packets for daemon */
-/*net*/	struct	ifqueue sc_fastq;	/* interactive output packet q */
-	struct	mbuf *sc_npqueue;	/* output packets not to be sent yet */
-	struct	mbuf **sc_npqtail;	/* ptr to last next ptr in npqueue */
-	struct	pppstat sc_stats;	/* count of bytes/pkts sent/rcvd */
-	enum	NPmode sc_npmode[NUM_NP]; /* what to do with each NP */
-	struct	compressor *sc_xcomp;	/* transmit compressor */
-	void	*sc_xc_state;		/* transmit compressor state */
-	struct	compressor *sc_rcomp;	/* receive decompressor */
-	void	*sc_rc_state;		/* receive decompressor state */
-	time_t	sc_last_sent;		/* time (secs) last NP pkt sent */
-	time_t	sc_last_recv;		/* time (secs) last NP pkt rcvd */
-#ifdef PPP_FILTER
-	struct	bpf_program sc_pass_filt;   /* filter for packets to pass */
-	struct	bpf_program sc_active_filt; /* filter for "non-idle" packets */
-#endif /* PPP_FILTER */
-#ifdef	VJC
-	struct	slcompress *sc_comp; 	/* vjc control buffer */
-#endif
-
-	/* Device-dependent part for async lines. */
-	ext_accm sc_asyncmap;		/* async control character map */
-	u_long	sc_rasyncmap;		/* receive async control char map */
-	struct	mbuf *sc_outm;		/* mbuf chain currently being output */
-	struct	mbuf *sc_m;		/* pointer to input mbuf chain */
-	struct	mbuf *sc_mc;		/* pointer to current input mbuf */
-	char	*sc_mp;			/* ptr to next char in input mbuf */
-	short	sc_ilen;		/* length of input packet so far */
-	u_short	sc_fcs;			/* FCS so far (input) */
-	u_short	sc_outfcs;		/* FCS so far for output packet */
-	u_char	sc_rawin[16];		/* chars as received */
-	int	sc_rawin_count;		/* # in sc_rawin */
-};
-
-struct	ppp_softc *pppalloc(pid_t pid);
-void	pppdealloc(struct ppp_softc *sc);
-int	pppioctl(struct ppp_softc *sc, u_long cmd, caddr_t data, int flag,
-	    struct thread *td);
-int	pppoutput(struct ifnet *ifp, struct mbuf *m0, struct sockaddr *dst,
-	    struct rtentry *rtp);
-void	ppp_restart(struct ppp_softc *sc);
-void	ppppktin(struct ppp_softc *sc, struct mbuf *m, int lost);
-struct	mbuf *ppp_dequeue(struct ppp_softc *sc);
diff --git a/newlib/libc/sys/linux/include/net/if_slvar.h b/newlib/libc/sys/linux/include/net/if_slvar.h
deleted file mode 100644
index 5f7008909..000000000
--- a/newlib/libc/sys/linux/include/net/if_slvar.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*-
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_slvar.h	8.3 (Berkeley) 2/1/94
- *
- * $FreeBSD: src/sys/net/if_slvar.h,v 1.21 2001/10/27 20:31:24 dillon Exp $
- */
-
-#ifndef _NET_IF_SLVAR_H_
-#define _NET_IF_SLVAR_H_
-
-#include <sys/callout.h>
-
-/*
- * Definitions for SLIP interface data structures
- *
- * (This exists so programs like slstats can get at the definition
- *  of sl_softc.)
- */
-struct sl_softc {
-	struct	ifnet sc_if;		/* network-visible interface */
-	struct	ifqueue sc_fastq;	/* interactive output queue */
-	struct	tty *sc_ttyp;		/* pointer to tty structure */
-	struct	mbuf *sc_mbuf;		/* pointer to mbuf containing buffer */
-	u_char	*sc_mp;			/* pointer to next available buf char */
-	u_char	*sc_ep;			/* pointer to last available buf char */
-	u_char	*sc_buf;		/* input buffer */
-	u_int	sc_flags;		/* see below */
-	u_int	sc_escape;	/* =1 if last char input was FRAME_ESCAPE */
-	time_t	sc_lasttime;		/* last time a char arrived */
-	long	sc_abortcount;		/* number of abort escape chars */
-	time_t	sc_starttime;		/* time of first abort in window */
-	u_int	sc_keepalive;		/* time	to decide link hang */
-	u_int	sc_outfill;	/* time	to send	FRAME_END when output idle */
-					/*
-					 * Handles for scheduling outfill and
-					 * keepalive timeouts.
-					 */
-	struct	callout_handle	sc_ofhandle;
-	struct	callout_handle	sc_kahandle;
-	struct	slcompress sc_comp;	/* tcp compression data */
-	LIST_ENTRY(sl_softc) sl_next;
-	u_char	*bpfbuf;		/* hang buffer for bpf here */
-};
-
-/* internal flags */
-#define	SC_ERROR	0x0001		/* had an input error */
-#define	SC_OUTWAIT	0x0002		/* waiting for output fill */
-#define	SC_KEEPALIVE	0x0004		/* input keepalive */
-
-/* visible flags */
-#define	SC_COMPRESS	IFF_LINK0	/* compress TCP traffic */
-#define	SC_NOICMP	IFF_LINK1	/* suppress ICMP traffic */
-#define	SC_AUTOCOMP	IFF_LINK2	/* auto-enable TCP compression */
-
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/if_sppp.h b/newlib/libc/sys/linux/include/net/if_sppp.h
deleted file mode 100644
index 182651c1f..000000000
--- a/newlib/libc/sys/linux/include/net/if_sppp.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Defines for synchronous PPP/Cisco link level subroutines.
- *
- * Copyright (C) 1994 Cronyx Ltd.
- * Author: Serge Vakulenko, <vak@cronyx.ru>
- *
- * Heavily revamped to conform to RFC 1661.
- * Copyright (C) 1997, Joerg Wunsch.
- *
- * This software is distributed with NO WARRANTIES, not even the implied
- * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Authors grant any other persons or organizations permission to use
- * or modify this software as long as this message is kept with the software,
- * all derivative works or modified versions.
- *
- * From: Version 2.0, Fri Oct  6 20:39:21 MSK 1995
- *
- * $FreeBSD: src/sys/net/if_sppp.h,v 1.24 2001/12/30 20:42:29 joerg Exp $
- */
-
-#ifndef _NET_IF_SPPP_H_
-#define _NET_IF_SPPP_H_ 1
-
-#define IDX_LCP 0		/* idx into state table */
-
-struct slcp {
-	u_long	opts;		/* LCP options to send (bitfield) */
-	u_long  magic;          /* local magic number */
-	u_long	mru;		/* our max receive unit */
-	u_long	their_mru;	/* their max receive unit */
-	u_long	protos;		/* bitmask of protos that are started */
-	u_char  echoid;         /* id of last keepalive echo request */
-	/* restart max values, see RFC 1661 */
-	int	timeout;
-	int	max_terminate;
-	int	max_configure;
-	int	max_failure;
-};
-
-#define IDX_IPCP 1		/* idx into state table */
-#define IDX_IPV6CP 2		/* idx into state table */
-
-struct sipcp {
-	u_long	opts;		/* IPCP options to send (bitfield) */
-	u_int	flags;
-#define IPCP_HISADDR_SEEN 1	/* have seen his address already */
-#define IPCP_MYADDR_DYN   2	/* my address is dynamically assigned */
-#define IPCP_MYADDR_SEEN  4	/* have seen his address already */
-#ifdef notdef
-#define IPV6CP_MYIFID_DYN 8	/* my ifid is dynamically assigned */
-#endif
-#define IPV6CP_MYIFID_SEEN 0x10	/* have seen his ifid already */
-#define IPCP_VJ		0x20	/* can use VJ compression */
-	int	max_state;	/* VJ: Max-Slot-Id */
-	int	compress_cid;	/* VJ: Comp-Slot-Id */
-};
-
-#define AUTHNAMELEN	64
-#define AUTHKEYLEN	16
-
-struct sauth {
-	u_short	proto;			/* authentication protocol to use */
-	u_short	flags;
-#define AUTHFLAG_NOCALLOUT	1	/* do not require authentication on */
-					/* callouts */
-#define AUTHFLAG_NORECHALLENGE	2	/* do not re-challenge CHAP */
-	u_char	name[AUTHNAMELEN];	/* system identification name */
-	u_char	secret[AUTHKEYLEN];	/* secret password */
-	u_char	challenge[AUTHKEYLEN];	/* random challenge */
-};
-
-#define IDX_PAP		3
-#define IDX_CHAP	4
-
-#define IDX_COUNT (IDX_CHAP + 1) /* bump this when adding cp's! */
-
-/*
- * Don't change the order of this.  Ordering the phases this way allows
- * for a comparision of ``pp_phase >= PHASE_AUTHENTICATE'' in order to
- * know whether LCP is up.
- */
-enum ppp_phase {
-	PHASE_DEAD, PHASE_ESTABLISH, PHASE_TERMINATE,
-	PHASE_AUTHENTICATE, PHASE_NETWORK
-};
-
-#define PP_MTU          1500    /* default/minimal MRU */
-#define PP_MAX_MRU	2048	/* maximal MRU we want to negotiate */
-
-/*
- * This is a cut down struct sppp (see below) that can easily be
- * exported to/ imported from userland without the need to include
- * dozens of kernel-internal header files.  It is used by the
- * SPPPIO[GS]DEFS ioctl commands below.
- */
-struct sppp_parms {
-	enum ppp_phase pp_phase;	/* phase we're currently in */
-	int	enable_vj;		/* VJ header compression enabled */
-	int	enable_ipv6;		/*
-					 * Enable IPv6 negotiations -- only
-					 * needed since each IPv4 i/f auto-
-					 * matically gets an IPv6 address
-					 * assigned, so we can't use this as
-					 * a decision.
-					 */
-	struct slcp lcp;		/* LCP params */
-	struct sipcp ipcp;		/* IPCP params */
-	struct sipcp ipv6cp;		/* IPv6CP params */
-	struct sauth myauth;		/* auth params, i'm peer */
-	struct sauth hisauth;		/* auth params, i'm authenticator */
-};
-
-/*
- * Definitions to pass struct sppp_parms data down into the kernel
- * using the SIOC[SG]IFGENERIC ioctl interface.
- *
- * In order to use this, create a struct spppreq, fill in the cmd
- * field with SPPPIOGDEFS, and put the address of this structure into
- * the ifr_data portion of a struct ifreq.  Pass this struct to a
- * SIOCGIFGENERIC ioctl.  Then replace the cmd field by SPPPIOSDEFS,
- * modify the defs field as desired, and pass the struct ifreq now
- * to a SIOCSIFGENERIC ioctl.
- */
-
-#define SPPPIOGDEFS  ((caddr_t)(('S' << 24) + (1 << 16) +\
-	sizeof(struct sppp_parms)))
-#define SPPPIOSDEFS  ((caddr_t)(('S' << 24) + (2 << 16) +\
-	sizeof(struct sppp_parms)))
-
-struct spppreq {
-	int	cmd;
-	struct sppp_parms defs;
-};
-
-#ifdef _KERNEL
-struct sppp {
-	/* NB: pp_if _must_ be first */
-	struct  ifnet pp_if;    /* network interface data */
-	struct  ifqueue pp_fastq; /* fast output queue */
-	struct	ifqueue pp_cpq;	/* PPP control protocol queue */
-	struct  sppp *pp_next;  /* next interface in keepalive list */
-	u_int   pp_mode;        /* major protocol modes (cisco/ppp/...) */
-	u_int   pp_flags;       /* sub modes */
-	u_short pp_alivecnt;    /* keepalive packets counter */
-	u_short pp_loopcnt;     /* loopback detection counter */
-	u_long  pp_seq[IDX_COUNT];	/* local sequence number */
-	u_long  pp_rseq[IDX_COUNT];	/* remote sequence number */
-	enum ppp_phase pp_phase;	/* phase we're currently in */
-	int	state[IDX_COUNT];	/* state machine */
-	u_char  confid[IDX_COUNT];	/* id of last configuration request */
-	int	rst_counter[IDX_COUNT];	/* restart counter */
-	int	fail_counter[IDX_COUNT]; /* negotiation failure counter */
-	int	confflags;	/* administrative configuration flags */
-#define CONF_ENABLE_VJ    0x01	/* VJ header compression enabled */
-#define CONF_ENABLE_IPV6  0x02	/* IPv6 administratively enabled */
-	time_t	pp_last_recv;	/* time last packet has been received */
-	time_t	pp_last_sent;	/* time last packet has been sent */
-	struct callout_handle ch[IDX_COUNT]; /* per-proto and if callouts */
-	struct callout_handle pap_my_to_ch; /* PAP needs one more... */
-	struct slcp lcp;		/* LCP params */
-	struct sipcp ipcp;		/* IPCP params */
-	struct sipcp ipv6cp;		/* IPv6CP params */
-	struct sauth myauth;		/* auth params, i'm peer */
-	struct sauth hisauth;		/* auth params, i'm authenticator */
-	struct slcompress *pp_comp;	/* for VJ compression */
-	/*
-	 * These functions are filled in by sppp_attach(), and are
-	 * expected to be used by the lower layer (hardware) drivers
-	 * in order to communicate the (un)availability of the
-	 * communication link.  Lower layer drivers that are always
-	 * ready to communicate (like hardware HDLC) can shortcut
-	 * pp_up from pp_tls, and pp_down from pp_tlf.
-	 */
-	void	(*pp_up)(struct sppp *sp);
-	void	(*pp_down)(struct sppp *sp);
-	/*
-	 * These functions need to be filled in by the lower layer
-	 * (hardware) drivers if they request notification from the
-	 * PPP layer whether the link is actually required.  They
-	 * correspond to the tls and tlf actions.
-	 */
-	void	(*pp_tls)(struct sppp *sp);
-	void	(*pp_tlf)(struct sppp *sp);
-	/*
-	 * These (optional) functions may be filled by the hardware
-	 * driver if any notification of established connections
-	 * (currently: IPCP up) is desired (pp_con) or any internal
-	 * state change of the interface state machine should be
-	 * signaled for monitoring purposes (pp_chg).
-	 */
-	void	(*pp_con)(struct sppp *sp);
-	void	(*pp_chg)(struct sppp *sp, int new_state);
-	/* These two fields are for use by the lower layer */
-	void    *pp_lowerp;
-	int     pp_loweri;
-};
-
-/* bits for pp_flags */
-#define PP_KEEPALIVE    0x01    /* use keepalive protocol */
-				/* 0x04 was PP_TIMO */
-#define PP_CALLIN	0x08	/* we are being called */
-#define PP_NEEDAUTH	0x10	/* remote requested authentication */
-
-void sppp_attach (struct ifnet *ifp);
-void sppp_detach (struct ifnet *ifp);
-void sppp_input (struct ifnet *ifp, struct mbuf *m);
-int sppp_ioctl (struct ifnet *ifp, u_long cmd, void *data);
-struct mbuf *sppp_dequeue (struct ifnet *ifp);
-struct mbuf *sppp_pick(struct ifnet *ifp);
-int sppp_isempty (struct ifnet *ifp);
-void sppp_flush (struct ifnet *ifp);
-#endif
-
-#endif /* _NET_IF_SPPP_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_stf.h b/newlib/libc/sys/linux/include/net/if_stf.h
deleted file mode 100644
index 3dbc61a0d..000000000
--- a/newlib/libc/sys/linux/include/net/if_stf.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*	$FreeBSD: src/sys/net/if_stf.h,v 1.4 2002/04/19 04:46:21 suz Exp $	*/
-/*	$KAME: if_stf.h,v 1.5 2001/10/12 10:09:17 keiichi Exp $	*/
-
-/*
- * Copyright (C) 2000 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NET_IF_STF_H_
-#define _NET_IF_STF_H_
-
-void in_stf_input(struct mbuf *, int);
-
-#endif /* _NET_IF_STF_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_tap.h b/newlib/libc/sys/linux/include/net/if_tap.h
deleted file mode 100644
index 14a4a8fd3..000000000
--- a/newlib/libc/sys/linux/include/net/if_tap.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 1999-2000 by Maksim Yevmenkin <m_evmenkin@yahoo.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * BASED ON:
- * -------------------------------------------------------------------------
- *
- * Copyright (c) 1988, Julian Onions <jpo@cs.nott.ac.uk>
- * Nottingham University 1987.
- */
-
-/*
- * $FreeBSD: src/sys/net/if_tap.h,v 1.1 2000/07/20 17:01:10 nsayer Exp $
- * $Id$
- */
-
-#ifndef _NET_IF_TAP_H_
-#define _NET_IF_TAP_H_
-
-/* refer to if_tapvar.h for the softc stuff */
-
-/* maximum receive packet size (hard limit) */
-#define	TAPMRU		16384
-
-struct tapinfo {
-	int	baudrate;	/* linespeed                 */
-	short	mtu;		/* maximum transmission unit */
-	u_char	type;		/* ethernet, tokenring, etc. */
-	u_char	dummy;		/* place holder              */
-};
-
-/* ioctl's for get/set debug */
-#define	TAPSDEBUG		_IOW('t', 90, int)
-#define	TAPGDEBUG		_IOR('t', 89, int)
-#define	TAPSIFINFO		_IOW('t', 91, struct tapinfo)
-#define	TAPGIFINFO		_IOR('t', 92, struct tapinfo)
-
-/* VMware ioctl's */
-#define VMIO_SIOCSIFFLAGS	_IO('V', 0)
-#define VMIO_SIOCSKEEP		_IO('V', 1)
-#define VMIO_SIOCSIFBR		_IO('V', 2)
-#define VMIO_SIOCSLADRF		_IO('V', 3)
-
-/* XXX -- unimplemented */
-#define VMIO_SIOCSETMACADDR	_IO('V', 4)
-
-/* XXX -- not used? */
-#define VMIO_SIOCPORT		_IO('V', 5)
-#define VMIO_SIOCBRIDGE		_IO('V', 6)
-#define VMIO_SIOCNETIF		_IO('V', 7)
-
-#endif /* !_NET_IF_TAP_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_tapvar.h b/newlib/libc/sys/linux/include/net/if_tapvar.h
deleted file mode 100644
index d131f085f..000000000
--- a/newlib/libc/sys/linux/include/net/if_tapvar.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 1999-2000 by Maksim Yevmenkin <m_evmenkin@yahoo.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * BASED ON:
- * -------------------------------------------------------------------------
- *
- * Copyright (c) 1998 Brian Somers <brian@Awfulhak.org>
- * All rights reserved.
- *
- * Copyright (c) 1988, Julian Onions <jpo@cs.nott.ac.uk>
- * Nottingham University 1987.
- */
-
-/*
- * $FreeBSD: src/sys/net/if_tapvar.h,v 1.4 2001/09/05 01:06:21 brooks Exp $
- * $Id$
- */
-
-#ifndef _NET_IF_TAPVAR_H_
-#define _NET_IF_TAPVAR_H_
-
-struct tap_softc {
-	struct arpcom	arpcom;			/* ethernet common data      */
-#define tap_if		arpcom.ac_if
-	struct resource	*tap_unit;		/* unit                      */
-
-	u_short		tap_flags;		/* misc flags                */
-#define	TAP_OPEN	(1 << 0)
-#define	TAP_INITED	(1 << 1)
-#define	TAP_RWAIT	(1 << 2)
-#define	TAP_ASYNC	(1 << 3)
-#define TAP_READY       (TAP_OPEN|TAP_INITED)
-#define	TAP_VMNET	(1 << 4)
-
-	u_int8_t 	ether_addr[ETHER_ADDR_LEN]; /* ether addr of the remote side */
-
-	pid_t		 tap_pid;		/* PID of process to open    */
-	struct sigio	*tap_sigio;		/* information for async I/O */
-	struct selinfo	 tap_rsel;		/* read select               */
-
-	SLIST_ENTRY(tap_softc)	tap_next;	/* next device in chain      */
-};
-
-#endif /* !_NET_IF_TAPVAR_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_tun.h b/newlib/libc/sys/linux/include/net/if_tun.h
deleted file mode 100644
index ed98e43fd..000000000
--- a/newlib/libc/sys/linux/include/net/if_tun.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*	$NetBSD: if_tun.h,v 1.5 1994/06/29 06:36:27 cgd Exp $	*/
-
-/*
- * Copyright (c) 1988, Julian Onions <jpo@cs.nott.ac.uk>
- * Nottingham University 1987.
- *
- * This source may be freely distributed, however I would be interested
- * in any changes that are made.
- *
- * This driver takes packets off the IP i/f and hands them up to a
- * user process to have its wicked way with. This driver has it's
- * roots in a similar driver written by Phil Cockcroft (formerly) at
- * UCL. This driver is based much more on read/write/select mode of
- * operation though.
- *
- * $FreeBSD: src/sys/net/if_tun.h,v 1.17 2000/01/23 01:47:12 brian Exp $
- */
-
-#ifndef _NET_IF_TUN_H_
-#define _NET_IF_TUN_H_
-
-/* Refer to if_tunvar.h for the softc stuff */
-
-/* Maximum transmit packet size (default) */
-#define	TUNMTU		1500
-
-/* Maximum receive packet size (hard limit) */
-#define	TUNMRU		16384
-
-struct tuninfo {
-	int	baudrate;		/* linespeed */
-	short	mtu;			/* maximum transmission unit */
-	u_char	type;			/* ethernet, tokenring, etc. */
-	u_char	dummy;			/* place holder */
-};
-
-/* ioctl's for get/set debug */
-#define	TUNSDEBUG	_IOW('t', 90, int)
-#define	TUNGDEBUG	_IOR('t', 89, int)
-#define	TUNSIFINFO	_IOW('t', 91, struct tuninfo)
-#define	TUNGIFINFO	_IOR('t', 92, struct tuninfo)
-#define	TUNSLMODE	_IOW('t', 93, int)
-#define	TUNSIFMODE	_IOW('t', 94, int)
-#define	TUNSIFPID	_IO('t', 95)
-#define	TUNSIFHEAD	_IOW('t', 96, int)
-#define	TUNGIFHEAD	_IOR('t', 97, int)
-
-#endif /* !_NET_IF_TUN_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_tunvar.h b/newlib/libc/sys/linux/include/net/if_tunvar.h
deleted file mode 100644
index b85a25f71..000000000
--- a/newlib/libc/sys/linux/include/net/if_tunvar.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*-
- * Copyright (c) 1998 Brian Somers <brian@Awfulhak.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/if_tunvar.h,v 1.9 2001/06/01 15:51:10 brian Exp $
- */
-
-#ifndef _NET_IF_TUNVAR_H_
-#define _NET_IF_TUNVAR_H_
-
-struct tun_softc {
-	u_short	tun_flags;		/* misc flags */
-#define	TUN_OPEN	0x0001
-#define	TUN_INITED	0x0002
-#define	TUN_RCOLL	0x0004
-#define	TUN_IASET	0x0008
-#define	TUN_DSTADDR	0x0010
-#define	TUN_LMODE	0x0020
-#define	TUN_RWAIT	0x0040
-#define	TUN_ASYNC	0x0080
-#define	TUN_IFHEAD	0x0100
-
-#define TUN_READY       (TUN_OPEN | TUN_INITED)
-
-	pid_t	tun_pid;		/* PID of process to open */
-	struct	ifnet tun_if;		/* the interface */
-	struct  sigio *tun_sigio;	/* information for async I/O */
-	struct	selinfo	tun_rsel;	/* read select */
-	struct	selinfo	tun_wsel;	/* write select (not used) */
-
-	struct	tun_softc *next;	/* Next softc in list */
-	struct	resource *r_unit;	/* resource allocated for this unit */
-};
-
-#endif /* !_NET_IF_TUNVAR_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_types.h b/newlib/libc/sys/linux/include/net/if_types.h
deleted file mode 100644
index e24d18875..000000000
--- a/newlib/libc/sys/linux/include/net/if_types.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright (c) 1989, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_types.h	8.3 (Berkeley) 4/28/95
- * $FreeBSD: src/sys/net/if_types.h,v 1.13 2001/04/04 14:18:57 yar Exp $
- * $NetBSD: if_types.h,v 1.16 2000/04/19 06:30:53 itojun Exp $
- */
-
-#ifndef _NET_IF_TYPES_H_
-#define _NET_IF_TYPES_H_
-
-/*
- * Interface types for benefit of parsing media address headers.
- * This list is derived from the SNMP list of ifTypes, originally
- * documented in RFC1573, now maintained as:
- *
- * 	ftp.isi.edu/in-notes/iana/assignments/smi-numbers
- */
-
-#define	IFT_OTHER	0x1		/* none of the following */
-#define	IFT_1822	0x2		/* old-style arpanet imp */
-#define	IFT_HDH1822	0x3		/* HDH arpanet imp */
-#define	IFT_X25DDN	0x4		/* x25 to imp */
-#define	IFT_X25		0x5		/* PDN X25 interface (RFC877) */
-#define	IFT_ETHER	0x6		/* Ethernet CSMA/CD */
-#define	IFT_ISO88023	0x7		/* CMSA/CD */
-#define	IFT_ISO88024	0x8		/* Token Bus */
-#define	IFT_ISO88025	0x9		/* Token Ring */
-#define	IFT_ISO88026	0xa		/* MAN */
-#define	IFT_STARLAN	0xb
-#define	IFT_P10		0xc		/* Proteon 10MBit ring */
-#define	IFT_P80		0xd		/* Proteon 80MBit ring */
-#define	IFT_HY		0xe		/* Hyperchannel */
-#define	IFT_FDDI	0xf
-#define	IFT_LAPB	0x10
-#define	IFT_SDLC	0x11
-#define	IFT_T1		0x12
-#define	IFT_CEPT	0x13		/* E1 - european T1 */
-#define	IFT_ISDNBASIC	0x14
-#define	IFT_ISDNPRIMARY	0x15
-#define	IFT_PTPSERIAL	0x16		/* Proprietary PTP serial */
-#define	IFT_PPP		0x17		/* RFC 1331 */
-#define	IFT_LOOP	0x18		/* loopback */
-#define	IFT_EON		0x19		/* ISO over IP */
-#define	IFT_XETHER	0x1a		/* obsolete 3MB experimental ethernet */
-#define	IFT_NSIP	0x1b		/* XNS over IP */
-#define	IFT_SLIP	0x1c		/* IP over generic TTY */
-#define	IFT_ULTRA	0x1d		/* Ultra Technologies */
-#define	IFT_DS3		0x1e		/* Generic T3 */
-#define	IFT_SIP		0x1f		/* SMDS */
-#define	IFT_FRELAY	0x20		/* Frame Relay DTE only */
-#define	IFT_RS232	0x21
-#define	IFT_PARA	0x22		/* parallel-port */
-#define	IFT_ARCNET	0x23
-#define	IFT_ARCNETPLUS	0x24
-#define	IFT_ATM		0x25		/* ATM cells */
-#define	IFT_MIOX25	0x26
-#define	IFT_SONET	0x27		/* SONET or SDH */
-#define	IFT_X25PLE	0x28
-#define	IFT_ISO88022LLC	0x29
-#define	IFT_LOCALTALK	0x2a
-#define	IFT_SMDSDXI	0x2b
-#define	IFT_FRELAYDCE	0x2c		/* Frame Relay DCE */
-#define	IFT_V35		0x2d
-#define	IFT_HSSI	0x2e
-#define	IFT_HIPPI	0x2f
-#define	IFT_MODEM	0x30		/* Generic Modem */
-#define	IFT_AAL5	0x31		/* AAL5 over ATM */
-#define	IFT_SONETPATH	0x32
-#define	IFT_SONETVT	0x33
-#define	IFT_SMDSICIP	0x34		/* SMDS InterCarrier Interface */
-#define	IFT_PROPVIRTUAL	0x35		/* Proprietary Virtual/internal */
-#define	IFT_PROPMUX	0x36		/* Proprietary Multiplexing */
-#define	IFT_IEEE80212		   0x37 /* 100BaseVG */
-#define	IFT_FIBRECHANNEL	   0x38 /* Fibre Channel */
-#define	IFT_HIPPIINTERFACE	   0x39 /* HIPPI interfaces	 */
-#define	IFT_FRAMERELAYINTERCONNECT 0x3a /* Obsolete, use either 0x20 or 0x2c */
-#define	IFT_AFLANE8023		   0x3b /* ATM Emulated LAN for 802.3 */
-#define	IFT_AFLANE8025		   0x3c /* ATM Emulated LAN for 802.5 */
-#define	IFT_CCTEMUL		   0x3d /* ATM Emulated circuit		  */
-#define	IFT_FASTETHER		   0x3e /* Fast Ethernet (100BaseT) */
-#define	IFT_ISDN		   0x3f /* ISDN and X.25	    */
-#define	IFT_V11			   0x40 /* CCITT V.11/X.21		*/
-#define	IFT_V36			   0x41 /* CCITT V.36			*/
-#define	IFT_G703AT64K		   0x42 /* CCITT G703 at 64Kbps */
-#define	IFT_G703AT2MB		   0x43 /* Obsolete see DS1-MIB */
-#define	IFT_QLLC		   0x44 /* SNA QLLC			*/
-#define	IFT_FASTETHERFX		   0x45 /* Fast Ethernet (100BaseFX)	*/
-#define	IFT_CHANNEL		   0x46 /* channel			*/
-#define	IFT_IEEE80211		   0x47 /* radio spread spectrum	*/
-#define	IFT_IBM370PARCHAN	   0x48 /* IBM System 360/370 OEMI Channel */
-#define	IFT_ESCON		   0x49 /* IBM Enterprise Systems Connection */
-#define	IFT_DLSW		   0x4a /* Data Link Switching */
-#define	IFT_ISDNS		   0x4b /* ISDN S/T interface */
-#define	IFT_ISDNU		   0x4c /* ISDN U interface */
-#define	IFT_LAPD		   0x4d /* Link Access Protocol D */
-#define	IFT_IPSWITCH		   0x4e /* IP Switching Objects */
-#define	IFT_RSRB		   0x4f /* Remote Source Route Bridging */
-#define	IFT_ATMLOGICAL		   0x50 /* ATM Logical Port */
-#define	IFT_DS0			   0x51 /* Digital Signal Level 0 */
-#define	IFT_DS0BUNDLE		   0x52 /* group of ds0s on the same ds1 */
-#define	IFT_BSC			   0x53 /* Bisynchronous Protocol */
-#define	IFT_ASYNC		   0x54 /* Asynchronous Protocol */
-#define	IFT_CNR			   0x55 /* Combat Net Radio */
-#define	IFT_ISO88025DTR		   0x56 /* ISO 802.5r DTR */
-#define	IFT_EPLRS		   0x57 /* Ext Pos Loc Report Sys */
-#define	IFT_ARAP		   0x58 /* Appletalk Remote Access Protocol */
-#define	IFT_PROPCNLS		   0x59 /* Proprietary Connectionless Protocol*/
-#define	IFT_HOSTPAD		   0x5a /* CCITT-ITU X.29 PAD Protocol */
-#define	IFT_TERMPAD		   0x5b /* CCITT-ITU X.3 PAD Facility */
-#define	IFT_FRAMERELAYMPI	   0x5c /* Multiproto Interconnect over FR */
-#define	IFT_X213		   0x5d /* CCITT-ITU X213 */
-#define	IFT_ADSL		   0x5e /* Asymmetric Digital Subscriber Loop */
-#define	IFT_RADSL		   0x5f /* Rate-Adapt. Digital Subscriber Loop*/
-#define	IFT_SDSL		   0x60 /* Symmetric Digital Subscriber Loop */
-#define	IFT_VDSL		   0x61 /* Very H-Speed Digital Subscrib. Loop*/
-#define	IFT_ISO88025CRFPINT	   0x62 /* ISO 802.5 CRFP */
-#define	IFT_MYRINET		   0x63 /* Myricom Myrinet */
-#define	IFT_VOICEEM		   0x64 /* voice recEive and transMit */
-#define	IFT_VOICEFXO		   0x65 /* voice Foreign Exchange Office */
-#define	IFT_VOICEFXS		   0x66 /* voice Foreign Exchange Station */
-#define	IFT_VOICEENCAP		   0x67 /* voice encapsulation */
-#define	IFT_VOICEOVERIP		   0x68 /* voice over IP encapsulation */
-#define	IFT_ATMDXI		   0x69 /* ATM DXI */
-#define	IFT_ATMFUNI		   0x6a /* ATM FUNI */
-#define	IFT_ATMIMA		   0x6b /* ATM IMA		      */
-#define	IFT_PPPMULTILINKBUNDLE	   0x6c /* PPP Multilink Bundle */
-#define	IFT_IPOVERCDLC		   0x6d /* IBM ipOverCdlc */
-#define	IFT_IPOVERCLAW		   0x6e /* IBM Common Link Access to Workstn */
-#define	IFT_STACKTOSTACK	   0x6f /* IBM stackToStack */
-#define	IFT_VIRTUALIPADDRESS	   0x70 /* IBM VIPA */
-#define	IFT_MPC			   0x71 /* IBM multi-protocol channel support */
-#define	IFT_IPOVERATM		   0x72 /* IBM ipOverAtm */
-#define	IFT_ISO88025FIBER	   0x73 /* ISO 802.5j Fiber Token Ring */
-#define	IFT_TDLC		   0x74 /* IBM twinaxial data link control */
-#define	IFT_GIGABITETHERNET	   0x75 /* Gigabit Ethernet */
-#define	IFT_HDLC		   0x76 /* HDLC */
-#define	IFT_LAPF		   0x77 /* LAP F */
-#define	IFT_V37			   0x78 /* V.37 */
-#define	IFT_X25MLP		   0x79 /* Multi-Link Protocol */
-#define	IFT_X25HUNTGROUP	   0x7a /* X25 Hunt Group */
-#define	IFT_TRANSPHDLC		   0x7b /* Transp HDLC */
-#define	IFT_INTERLEAVE		   0x7c /* Interleave channel */
-#define	IFT_FAST		   0x7d /* Fast channel */
-#define	IFT_IP			   0x7e /* IP (for APPN HPR in IP networks) */
-#define	IFT_DOCSCABLEMACLAYER	   0x7f /* CATV Mac Layer */
-#define	IFT_DOCSCABLEDOWNSTREAM	   0x80 /* CATV Downstream interface */
-#define	IFT_DOCSCABLEUPSTREAM	   0x81 /* CATV Upstream interface */
-#define	IFT_A12MPPSWITCH	   0x82	/* Avalon Parallel Processor */
-#define	IFT_TUNNEL		   0x83	/* Encapsulation interface */
-#define	IFT_COFFEE		   0x84	/* coffee pot */
-#define	IFT_CES			   0x85	/* Circiut Emulation Service */
-#define	IFT_ATMSUBINTERFACE	   0x86	/* (x)  ATM Sub Interface */
-#define	IFT_L2VLAN		   0x87	/* Layer 2 Virtual LAN using 802.1Q */
-#define	IFT_L3IPVLAN		   0x88	/* Layer 3 Virtual LAN - IP Protocol */
-#define	IFT_L3IPXVLAN		   0x89	/* Layer 3 Virtual LAN - IPX Prot. */
-#define	IFT_DIGITALPOWERLINE	   0x8a	/* IP over Power Lines */
-#define	IFT_MEDIAMAILOVERIP	   0x8b	/* (xxx)  Multimedia Mail over IP */
-#define	IFT_DTM			   0x8c	/* Dynamic synchronous Transfer Mode */
-#define	IFT_DCN			   0x8d	/* Data Communications Network */
-#define	IFT_IPFORWARD		   0x8e	/* IP Forwarding Interface */
-#define	IFT_MSDSL		   0x8f	/* Multi-rate Symmetric DSL */
-#define	IFT_IEEE1394		   0x90	/* IEEE1394 High Performance SerialBus*/
-#define	IFT_IFGSN		   0x91	/* HIPPI-6400 */
-#define	IFT_DVBRCCMACLAYER	   0x92	/* DVB-RCC MAC Layer */
-#define	IFT_DVBRCCDOWNSTREAM	   0x93	/* DVB-RCC Downstream Channel */
-#define	IFT_DVBRCCUPSTREAM	   0x94	/* DVB-RCC Upstream Channel */
-#define	IFT_ATMVIRTUAL		   0x95	/* ATM Virtual Interface */
-#define	IFT_MPLSTUNNEL		   0x96	/* MPLS Tunnel Virtual Interface */
-#define	IFT_SRP			   0x97	/* Spatial Reuse Protocol */
-#define	IFT_VOICEOVERATM	   0x98	/* Voice over ATM */
-#define	IFT_VOICEOVERFRAMERELAY	   0x99	/* Voice Over Frame Relay */
-#define	IFT_IDSL		   0x9a	/* Digital Subscriber Loop over ISDN */
-#define	IFT_COMPOSITELINK	   0x9b	/* Avici Composite Link Interface */
-#define	IFT_SS7SIGLINK		   0x9c	/* SS7 Signaling Link */
-#define	IFT_PROPWIRELESSP2P	   0x9d	/* Prop. P2P wireless interface */
-#define	IFT_FRFORWARD		   0x9e	/* Frame forward Interface */
-#define	IFT_RFC1483		   0x9f	/* Multiprotocol over ATM AAL5 */
-#define	IFT_USB			   0xa0	/* USB Interface */
-#define	IFT_IEEE8023ADLAG	   0xa1	/* IEEE 802.3ad Link Aggregate*/
-#define	IFT_BGPPOLICYACCOUNTING	   0xa2	/* BGP Policy Accounting */
-#define	IFT_FRF16MFRBUNDLE	   0xa3	/* FRF.16 Multilik Frame Relay*/
-#define	IFT_H323GATEKEEPER	   0xa4	/* H323 Gatekeeper */
-#define	IFT_H323PROXY		   0xa5	/* H323 Voice and Video Proxy */
-#define	IFT_MPLS		   0xa6	/* MPLS */
-#define	IFT_MFSIGLINK		   0xa7	/* Multi-frequency signaling link */
-#define	IFT_HDSL2		   0xa8	/* High Bit-Rate DSL, 2nd gen. */
-#define	IFT_SHDSL		   0xa9	/* Multirate HDSL2 */
-#define	IFT_DS1FDL		   0xaa	/* Facility Data Link (4Kbps) on a DS1*/
-#define	IFT_POS			   0xab	/* Packet over SONET/SDH Interface */
-#define	IFT_DVBASILN		   0xac	/* DVB-ASI Input */
-#define	IFT_DVBASIOUT		   0xad	/* DVB-ASI Output */
-#define	IFT_PLC			   0xae	/* Power Line Communications */
-#define	IFT_NFAS		   0xaf	/* Non-Facility Associated Signaling */
-#define	IFT_TR008		   0xb0	/* TROO8 */
-#define	IFT_GR303RDT		   0xb1	/* Remote Digital Terminal */
-#define	IFT_GR303IDT		   0xb2	/* Integrated Digital Terminal */
-#define	IFT_ISUP		   0xb3	/* ISUP */
-#define	IFT_PROPDOCSWIRELESSMACLAYER	   0xb4	/* prop/Wireless MAC Layer */
-#define	IFT_PROPDOCSWIRELESSDOWNSTREAM	   0xb5	/* prop/Wireless Downstream */
-#define	IFT_PROPDOCSWIRELESSUPSTREAM	   0xb6	/* prop/Wireless Upstream */
-#define	IFT_HIPERLAN2		   0xb7	/* HIPERLAN Type 2 Radio Interface */
-#define	IFT_PROPBWAP2MP		   0xb8	/* PropBroadbandWirelessAccess P2MP*/
-#define	IFT_SONETOVERHEADCHANNEL   0xb9	/* SONET Overhead Channel */
-#define	IFT_DIGITALWRAPPEROVERHEADCHANNEL  0xba	/* Digital Wrapper Overhead */
-#define	IFT_AAL2		   0xbb	/* ATM adaptation layer 2 */
-#define	IFT_RADIOMAC		   0xbc	/* MAC layer over radio links */
-#define	IFT_ATMRADIO		   0xbd	/* ATM over radio links */
-#define	IFT_IMT			   0xbe /* Inter-Machine Trunks */
-#define	IFT_MVL			   0xbf /* Multiple Virtual Lines DSL */
-#define	IFT_REACHDSL		   0xc0 /* Long Reach DSL */
-#define	IFT_FRDLCIENDPT		   0xc1 /* Frame Relay DLCI End Point */
-#define	IFT_ATMVCIENDPT		   0xc2 /* ATM VCI End Point */
-#define	IFT_OPTICALCHANNEL	   0xc3 /* Optical Channel */
-#define	IFT_OPTICALTRANSPORT	   0xc4 /* Optical Transport */
-
-/* not based on IANA assignments */
-#define	IFT_GIF		0xf0
-#define	IFT_PVC		0xf1
-#define	IFT_FAITH	0xf2
-#define	IFT_STF		0xf3
-#endif /* !_NET_IF_TYPES_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_var.h b/newlib/libc/sys/linux/include/net/if_var.h
deleted file mode 100644
index cc53626ba..000000000
--- a/newlib/libc/sys/linux/include/net/if_var.h
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	From: @(#)if.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/if_var.h,v 1.46 2002/05/07 18:11:55 imp Exp $
- */
-
-#ifndef	_NET_IF_VAR_H_
-#define	_NET_IF_VAR_H_
-
-/*
- * Structures defining a network interface, providing a packet
- * transport mechanism (ala level 0 of the PUP protocols).
- *
- * Each interface accepts output datagrams of a specified maximum
- * length, and provides higher level routines with input datagrams
- * received from its medium.
- *
- * Output occurs when the routine if_output is called, with three parameters:
- *	(*ifp->if_output)(ifp, m, dst, rt)
- * Here m is the mbuf chain to be sent and dst is the destination address.
- * The output routine encapsulates the supplied datagram if necessary,
- * and then transmits it on its medium.
- *
- * On input, each interface unwraps the data received by it, and either
- * places it on the input queue of a internetwork datagram routine
- * and posts the associated software interrupt, or passes the datagram to a raw
- * packet input routine.
- *
- * Routines exist for locating interfaces by their addresses
- * or for locating a interface on a certain network, as well as more general
- * routing and gateway routines maintaining information used to locate
- * interfaces.  These routines live in the files if.c and route.c
- */
-
-#ifdef __STDC__
-/*
- * Forward structure declarations for function prototypes [sic].
- */
-struct	mbuf;
-struct	thread;
-struct	rtentry;
-struct	rt_addrinfo;
-struct	socket;
-struct	ether_header;
-#endif
-
-#include <sys/queue.h>		/* get TAILQ macros */
-
-#ifdef _KERNEL
-#include <sys/mbuf.h>
-#include <sys/systm.h>		/* XXX */
-#endif /* _KERNEL */
-#include <sys/lock.h>		/* XXX */
-#include <sys/mutex.h>		/* XXX */
-#include <sys/event.h>		/* XXX */
-
-TAILQ_HEAD(ifnethead, ifnet);	/* we use TAILQs so that the order of */
-TAILQ_HEAD(ifaddrhead, ifaddr);	/* instantiation is preserved in the list */
-TAILQ_HEAD(ifprefixhead, ifprefix);
-TAILQ_HEAD(ifmultihead, ifmultiaddr);
-
-/*
- * Structure defining a queue for a network interface.
- */
-struct	ifqueue {
-	struct	mbuf *ifq_head;
-	struct	mbuf *ifq_tail;
-	int	ifq_len;
-	int	ifq_maxlen;
-	int	ifq_drops;
-	struct	mtx ifq_mtx;
-};
-
-/*
- * Structure defining a network interface.
- *
- * (Would like to call this struct ``if'', but C isn't PL/1.)
- */
-
-/*
- * NB: For FreeBSD, it is assumed that each NIC driver's softc starts with
- * one of these structures, typically held within an arpcom structure.
- *
- *	struct <foo>_softc {
- *		struct arpcom {
- *			struct  ifnet ac_if;
- *			...
- *		} <arpcom> ;
- *		...
- *	};
- *
- * The assumption is used in a number of places, including many
- * files in sys/net, device drivers, and sys/dev/mii.c:miibus_attach().
- *
- * Unfortunately devices' softc are opaque, so we depend on this layout
- * to locate the struct ifnet from the softc in the generic code.
- * 
- */
-struct ifnet {
-	void	*if_softc;		/* pointer to driver state */
-	char	*if_name;		/* name, e.g. ``en'' or ``lo'' */
-	TAILQ_ENTRY(ifnet) if_link; 	/* all struct ifnets are chained */
-	struct	ifaddrhead if_addrhead;	/* linked list of addresses per if */
-	struct	klist if_klist;		/* events attached to this if */
-	int	if_pcount;		/* number of promiscuous listeners */
-	struct	bpf_if *if_bpf;		/* packet filter structure */
-	u_short	if_index;		/* numeric abbreviation for this if  */
-	short	if_unit;		/* sub-unit for lower level driver */
-	short	if_timer;		/* time 'til if_watchdog called */
-	short	if_flags;		/* up/down, broadcast, etc. */
-	int	if_capabilities;	/* interface capabilities */
-	int	if_capenable;		/* enabled features */
-	int	if_ipending;		/* interrupts pending */
-	void	*if_linkmib;		/* link-type-specific MIB data */
-	size_t	if_linkmiblen;		/* length of above data */
-	struct	if_data if_data;
-	struct	ifmultihead if_multiaddrs; /* multicast addresses configured */
-	int	if_amcount;		/* number of all-multicast requests */
-/* procedure handles */
-	int	(*if_output)		/* output routine (enqueue) */
-		(struct ifnet *, struct mbuf *, struct sockaddr *,
-		     struct rtentry *);
-	void	(*if_start)		/* initiate output routine */
-		(struct ifnet *);
-	int	(*if_done)		/* output complete routine */
-		(struct ifnet *);	/* (XXX not used; fake prototype) */
-	int	(*if_ioctl)		/* ioctl routine */
-		(struct ifnet *, u_long, caddr_t);
-	void	(*if_watchdog)		/* timer routine */
-		(struct ifnet *);
-	int	(*if_poll_recv)		/* polled receive routine */
-		(struct ifnet *, int *);
-	int	(*if_poll_xmit)		/* polled transmit routine */
-		(struct ifnet *, int *);
-	void	(*if_poll_intren)	/* polled interrupt reenable routine */
-		(struct ifnet *);
-	void	(*if_poll_slowinput)	/* input routine for slow devices */
-		(struct ifnet *, struct mbuf *);
-	void	(*if_init)		/* Init routine */
-		(void *);
-	int	(*if_resolvemulti)	/* validate/resolve multicast */
-		(struct ifnet *, struct sockaddr **, struct sockaddr *);
-	struct	ifqueue if_snd;		/* output queue */
-	struct	ifqueue *if_poll_slowq;	/* input queue for slow devices */
-	struct	ifprefixhead if_prefixhead; /* list of prefixes per if */
-	u_int8_t *if_broadcastaddr;	/* linklevel broadcast bytestring */
-};
-
-typedef void if_init_f_t(void *);
-
-#define	if_mtu		if_data.ifi_mtu
-#define	if_type		if_data.ifi_type
-#define if_physical	if_data.ifi_physical
-#define	if_addrlen	if_data.ifi_addrlen
-#define	if_hdrlen	if_data.ifi_hdrlen
-#define	if_metric	if_data.ifi_metric
-#define	if_baudrate	if_data.ifi_baudrate
-#define	if_hwassist	if_data.ifi_hwassist
-#define	if_ipackets	if_data.ifi_ipackets
-#define	if_ierrors	if_data.ifi_ierrors
-#define	if_opackets	if_data.ifi_opackets
-#define	if_oerrors	if_data.ifi_oerrors
-#define	if_collisions	if_data.ifi_collisions
-#define	if_ibytes	if_data.ifi_ibytes
-#define	if_obytes	if_data.ifi_obytes
-#define	if_imcasts	if_data.ifi_imcasts
-#define	if_omcasts	if_data.ifi_omcasts
-#define	if_iqdrops	if_data.ifi_iqdrops
-#define	if_noproto	if_data.ifi_noproto
-#define	if_lastchange	if_data.ifi_lastchange
-#define if_recvquota	if_data.ifi_recvquota
-#define	if_xmitquota	if_data.ifi_xmitquota
-#define if_rawoutput(if, m, sa) if_output(if, m, sa, (struct rtentry *)0)
-
-/* for compatibility with other BSDs */
-#define	if_addrlist	if_addrhead
-#define	if_list		if_link
-
-/*
- * Bit values in if_ipending
- */
-#define	IFI_RECV	1	/* I want to receive */
-#define	IFI_XMIT	2	/* I want to transmit */
-
-/*
- * Output queues (ifp->if_snd) and slow device input queues (*ifp->if_slowq)
- * are queues of messages stored on ifqueue structures
- * (defined above).  Entries are added to and deleted from these structures
- * by these macros, which should be called with ipl raised to splimp().
- */
-#define IF_LOCK(ifq)		mtx_lock(&(ifq)->ifq_mtx)
-#define IF_UNLOCK(ifq)		mtx_unlock(&(ifq)->ifq_mtx)
-#define	_IF_QFULL(ifq)		((ifq)->ifq_len >= (ifq)->ifq_maxlen)
-#define	_IF_DROP(ifq)		((ifq)->ifq_drops++)
-#define	_IF_QLEN(ifq)		((ifq)->ifq_len)
-
-#define	_IF_ENQUEUE(ifq, m) do { 				\
-	(m)->m_nextpkt = NULL;					\
-	if ((ifq)->ifq_tail == NULL) 				\
-		(ifq)->ifq_head = m; 				\
-	else 							\
-		(ifq)->ifq_tail->m_nextpkt = m; 		\
-	(ifq)->ifq_tail = m; 					\
-	(ifq)->ifq_len++; 					\
-} while (0)
-
-#define IF_ENQUEUE(ifq, m) do {					\
-	IF_LOCK(ifq); 						\
-	_IF_ENQUEUE(ifq, m); 					\
-	IF_UNLOCK(ifq); 					\
-} while (0)
-
-#define	_IF_PREPEND(ifq, m) do {				\
-	(m)->m_nextpkt = (ifq)->ifq_head; 			\
-	if ((ifq)->ifq_tail == NULL) 				\
-		(ifq)->ifq_tail = (m); 				\
-	(ifq)->ifq_head = (m); 					\
-	(ifq)->ifq_len++; 					\
-} while (0)
-
-#define IF_PREPEND(ifq, m) do {		 			\
-	IF_LOCK(ifq); 						\
-	_IF_PREPEND(ifq, m); 					\
-	IF_UNLOCK(ifq); 					\
-} while (0)
-
-#define	_IF_DEQUEUE(ifq, m) do { 				\
-	(m) = (ifq)->ifq_head; 					\
-	if (m) { 						\
-		if (((ifq)->ifq_head = (m)->m_nextpkt) == 0) 	\
-			(ifq)->ifq_tail = NULL; 		\
-		(m)->m_nextpkt = NULL; 				\
-		(ifq)->ifq_len--; 				\
-	} 							\
-} while (0)
-
-#define IF_DEQUEUE(ifq, m) do { 				\
-	IF_LOCK(ifq); 						\
-	_IF_DEQUEUE(ifq, m); 					\
-	IF_UNLOCK(ifq); 					\
-} while (0)
-
-#define IF_DRAIN(ifq) do { 					\
-	struct mbuf *m; 					\
-	IF_LOCK(ifq); 						\
-	for (;;) { 						\
-		_IF_DEQUEUE(ifq, m); 				\
-		if (m == NULL) 					\
-			break; 					\
-		m_freem(m); 					\
-	} 							\
-	IF_UNLOCK(ifq); 					\
-} while (0)
-
-#ifdef _KERNEL
-#define	IF_HANDOFF(ifq, m, ifp)			if_handoff(ifq, m, ifp, 0)
-#define	IF_HANDOFF_ADJ(ifq, m, ifp, adj)	if_handoff(ifq, m, ifp, adj)
-
-static __inline int
-if_handoff(struct ifqueue *ifq, struct mbuf *m, struct ifnet *ifp, int adjust)
-{
-	int active = 0;
-
-	IF_LOCK(ifq);
-	if (_IF_QFULL(ifq)) {
-		_IF_DROP(ifq);
-		IF_UNLOCK(ifq);
-		m_freem(m);
-		return (0);
-	}
-	if (ifp != NULL) {
-		ifp->if_obytes += m->m_pkthdr.len + adjust;
-		if (m->m_flags & M_MCAST)
-			ifp->if_omcasts++;
-		active = ifp->if_flags & IFF_OACTIVE;
-	}
-	_IF_ENQUEUE(ifq, m);
-	IF_UNLOCK(ifq);
-	if (ifp != NULL && !active)
-		(*ifp->if_start)(ifp);
-	return (1);
-}
-
-/*
- * 72 was chosen below because it is the size of a TCP/IP
- * header (40) + the minimum mss (32).
- */
-#define	IF_MINMTU	72
-#define	IF_MAXMTU	65535
-
-#endif /* _KERNEL */
-
-/*
- * The ifaddr structure contains information about one address
- * of an interface.  They are maintained by the different address families,
- * are allocated and attached when an address is set, and are linked
- * together so all addresses for an interface can be located.
- */
-struct ifaddr {
-	struct	sockaddr *ifa_addr;	/* address of interface */
-	struct	sockaddr *ifa_dstaddr;	/* other end of p-to-p link */
-#define	ifa_broadaddr	ifa_dstaddr	/* broadcast address interface */
-	struct	sockaddr *ifa_netmask;	/* used to determine subnet */
-	struct	if_data if_data;	/* not all members are meaningful */
-	struct	ifnet *ifa_ifp;		/* back-pointer to interface */
-	TAILQ_ENTRY(ifaddr) ifa_link;	/* queue macro glue */
-	void	(*ifa_rtrequest)	/* check or clean routes (+ or -)'d */
-		(int, struct rtentry *, struct rt_addrinfo *);
-	u_short	ifa_flags;		/* mostly rt_flags for cloning */
-	u_int	ifa_refcnt;		/* references to this structure */
-	int	ifa_metric;		/* cost of going out this interface */
-#ifdef notdef
-	struct	rtentry *ifa_rt;	/* XXXX for ROUTETOIF ????? */
-#endif
-	int (*ifa_claim_addr)		/* check if an addr goes to this if */
-		(struct ifaddr *, struct sockaddr *);
-
-};
-#define	IFA_ROUTE	RTF_UP		/* route installed */
-
-/* for compatibility with other BSDs */
-#define	ifa_list	ifa_link
-
-/*
- * The prefix structure contains information about one prefix
- * of an interface.  They are maintained by the different address families,
- * are allocated and attached when an prefix or an address is set,
- * and are linked together so all prefixes for an interface can be located.
- */
-struct ifprefix {
-	struct	sockaddr *ifpr_prefix;	/* prefix of interface */
-	struct	ifnet *ifpr_ifp;	/* back-pointer to interface */
-	TAILQ_ENTRY(ifprefix) ifpr_list; /* queue macro glue */
-	u_char	ifpr_plen;		/* prefix length in bits */
-	u_char	ifpr_type;		/* protocol dependent prefix type */
-};
-
-/*
- * Multicast address structure.  This is analogous to the ifaddr
- * structure except that it keeps track of multicast addresses.
- * Also, the reference count here is a count of requests for this
- * address, not a count of pointers to this structure.
- */
-struct ifmultiaddr {
-	TAILQ_ENTRY(ifmultiaddr) ifma_link; /* queue macro glue */
-	struct	sockaddr *ifma_addr; 	/* address this membership is for */
-	struct	sockaddr *ifma_lladdr;	/* link-layer translation, if any */
-	struct	ifnet *ifma_ifp;	/* back-pointer to interface */
-	u_int	ifma_refcount;		/* reference count */
-	void	*ifma_protospec;	/* protocol-specific state, if any */
-};
-
-#ifdef _KERNEL
-#define	IFAFREE(ifa) \
-	do { \
-		if ((ifa)->ifa_refcnt <= 0) \
-			ifafree(ifa); \
-		else \
-			(ifa)->ifa_refcnt--; \
-	} while (0)
-
-struct ifindex_entry {
-	struct	ifnet *ife_ifnet;
-	struct	ifaddr *ife_ifnet_addr;
-	dev_t	ife_dev;
-};
-
-#define ifnet_byindex(idx)	ifindex_table[(idx)].ife_ifnet
-#define ifaddr_byindex(idx)	ifindex_table[(idx)].ife_ifnet_addr
-#define ifdev_byindex(idx)	ifindex_table[(idx)].ife_dev
-
-extern	struct ifnethead ifnet;
-extern	struct ifindex_entry *ifindex_table;
-extern	int ifqmaxlen;
-extern	struct ifnet *loif;	/* first loopback interface */
-extern	int if_index;
-
-void	ether_ifattach(struct ifnet *, int);
-void	ether_ifdetach(struct ifnet *, int);
-void	ether_input(struct ifnet *, struct ether_header *, struct mbuf *);
-void	ether_demux(struct ifnet *, struct ether_header *, struct mbuf *);
-int	ether_output(struct ifnet *,
-	   struct mbuf *, struct sockaddr *, struct rtentry *);
-int	ether_output_frame(struct ifnet *, struct mbuf *);
-int	ether_ioctl(struct ifnet *, int, caddr_t);
-
-int	if_addmulti(struct ifnet *, struct sockaddr *, struct ifmultiaddr **);
-int	if_allmulti(struct ifnet *, int);
-void	if_attach(struct ifnet *);
-int	if_delmulti(struct ifnet *, struct sockaddr *);
-void	if_detach(struct ifnet *);
-void	if_down(struct ifnet *);
-void	if_route(struct ifnet *, int flag, int fam);
-int	if_setlladdr(struct ifnet *, const u_char *, int);
-void	if_unroute(struct ifnet *, int flag, int fam);
-void	if_up(struct ifnet *);
-/*void	ifinit(void);*/ /* declared in systm.h for main() */
-int	ifioctl(struct socket *, u_long, caddr_t, struct thread *);
-int	ifpromisc(struct ifnet *, int);
-struct	ifnet *ifunit(const char *);
-struct	ifnet *if_withname(struct sockaddr *);
-
-int	if_poll_recv_slow(struct ifnet *ifp, int *quotap);
-void	if_poll_xmit_slow(struct ifnet *ifp, int *quotap);
-void	if_poll_throttle(void);
-void	if_poll_unthrottle(void *);
-void	if_poll_init(void);
-void	if_poll(void);
-
-struct	ifaddr *ifa_ifwithaddr(struct sockaddr *);
-struct	ifaddr *ifa_ifwithdstaddr(struct sockaddr *);
-struct	ifaddr *ifa_ifwithnet(struct sockaddr *);
-struct	ifaddr *ifa_ifwithroute(int, struct sockaddr *, struct sockaddr *);
-struct	ifaddr *ifaof_ifpforaddr(struct sockaddr *, struct ifnet *);
-void	ifafree(struct ifaddr *);
-
-struct	ifmultiaddr *ifmaof_ifpforaddr(struct sockaddr *, struct ifnet *);
-int	if_simloop(struct ifnet *ifp, struct mbuf *m, int af, int hlen);
-
-void	if_clone_attach(struct if_clone *);
-void	if_clone_detach(struct if_clone *);
-
-int	if_clone_create(char *, int);
-int	if_clone_destroy(const char *);
-
-#define IF_LLADDR(ifp)							\
-    LLADDR((struct sockaddr_dl *) ifaddr_byindex((ifp)->if_index)->ifa_addr)
-
-#ifdef DEVICE_POLLING
-enum poll_cmd {	POLL_ONLY, POLL_AND_CHECK_STATUS, POLL_DEREGISTER };
-
-typedef	void poll_handler_t(struct ifnet *ifp, enum poll_cmd cmd, int count);
-int    ether_poll_register(poll_handler_t *h, struct ifnet *ifp);
-int    ether_poll_deregister(struct ifnet *ifp);
-#endif /* DEVICE_POLLING */
-
-#endif /* _KERNEL */
-
-#endif /* !_NET_IF_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/net/if_vlan_var.h b/newlib/libc/sys/linux/include/net/if_vlan_var.h
deleted file mode 100644
index 249543b66..000000000
--- a/newlib/libc/sys/linux/include/net/if_vlan_var.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright 1998 Massachusetts Institute of Technology
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby
- * granted, provided that both the above copyright notice and this
- * permission notice appear in all copies, that both the above
- * copyright notice and this permission notice appear in all
- * supporting documentation, and that the name of M.I.T. not be used
- * in advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.  M.I.T. makes
- * no representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied
- * warranty.
- * 
- * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''.  M.I.T. DISCLAIMS
- * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
- * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/if_vlan_var.h,v 1.11 2002/03/11 09:26:07 mux Exp $
- */
-
-#ifndef _NET_IF_VLAN_VAR_H_
-#define	_NET_IF_VLAN_VAR_H_	1
-
-#ifdef _KERNEL
-struct vlan_mc_entry {
-	struct ether_addr		mc_addr;
-	SLIST_ENTRY(vlan_mc_entry)	mc_entries;
-};
-
-struct	ifvlan {
-	struct	arpcom ifv_ac;	/* make this an interface */
-	struct	ifnet *ifv_p;	/* parent inteface of this vlan */
-	struct	ifv_linkmib {
-		int	ifvm_parent;
-		u_int16_t ifvm_proto; /* encapsulation ethertype */
-		u_int16_t ifvm_tag; /* tag to apply on packets leaving if */
-	}	ifv_mib;
-	SLIST_HEAD(__vlan_mchead, vlan_mc_entry)	vlan_mc_listhead;
-	LIST_ENTRY(ifvlan) ifv_list;
-};
-#define	ifv_if	ifv_ac.ac_if
-#define	ifv_tag	ifv_mib.ifvm_tag
-#endif /* _KERNEL */
-
-struct	ether_vlan_header {
-	u_char	evl_dhost[ETHER_ADDR_LEN];
-	u_char	evl_shost[ETHER_ADDR_LEN];
-	u_int16_t evl_encap_proto;
-	u_int16_t evl_tag;
-	u_int16_t evl_proto;
-};
-
-#define	EVL_VLANOFTAG(tag) ((tag) & 4095)
-#define	EVL_PRIOFTAG(tag) (((tag) >> 13) & 7)
-#define	EVL_ENCAPLEN	4	/* length in octets of encapsulation */
-
-/* sysctl(3) tags, for compatibility purposes */
-#define	VLANCTL_PROTO	1
-#define	VLANCTL_MAX	2
-
-/*
- * Configuration structure for SIOCSETVLAN and SIOCGETVLAN ioctls.
- */
-struct	vlanreq {
-	char	vlr_parent[IFNAMSIZ];
-	u_short	vlr_tag;
-};
-#define	SIOCSETVLAN	SIOCSIFGENERIC
-#define	SIOCGETVLAN	SIOCGIFGENERIC
-
-#endif /* _NET_IF_VLAN_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/net/intrq.h b/newlib/libc/sys/linux/include/net/intrq.h
deleted file mode 100644
index 68e2e4afe..000000000
--- a/newlib/libc/sys/linux/include/net/intrq.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*-
- * Copyright (c) 2000 Brian Somers <brian@Awfulhak.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/intrq.h,v 1.4 2002/03/19 21:54:18 alfred Exp $
- */
-
-#ifndef _NET_INTRQ_H_
-#define	_NET_INTRQ_H_
-
-#ifdef _KERNEL
-extern int	atintrq1_present;
-extern int	atintrq2_present;
-extern int	atmintrq_present;
-extern int	ipintrq_present;
-extern int	ip6intrq_present;
-extern int	ipxintrq_present;
-extern int	natmintrq_present;
-extern int	nsintrq_present;
-
-extern int	family_enqueue(sa_family_t, struct mbuf *);
-#endif
-
-#endif /* _NET_INTRQ_H_ */
diff --git a/newlib/libc/sys/linux/include/net/iso88025.h b/newlib/libc/sys/linux/include/net/iso88025.h
deleted file mode 100644
index 898fc1c3d..000000000
--- a/newlib/libc/sys/linux/include/net/iso88025.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (c) 1998, Larry Lile
- * All rights reserved.
- *
- * For latest sources and information on this driver, please
- * go to http://anarchy.stdio.com.
- *
- * Questions, comments or suggestions should be directed to
- * Larry Lile <lile@stdio.com>.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice unmodified, this list of conditions, and the following
- *    disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/net/iso88025.h,v 1.7 2002/05/08 01:08:26 kbyanc Exp $
- *
- * Information gathered from tokenring@freebsd, /sys/net/ethernet.h and
- * the Mach token ring driver.
- */
-
-/*
- * Fundamental constants relating to iso 802.5
- */
-
-#ifndef _NET_ISO88025_H_
-#define _NET_ISO88025_H_
-
-/*
- * General ISO 802.5 definitions
- */
-#define	ISO88025_ADDR_LEN	6
-#define ISO88025_HDR_LEN	(ISO88025_CF_LEN + (ISO88025_ADDR_LEN * 2))
-#define ISO88025_CF_LEN		2
-#define RCF_LEN			2
-#define RIF_MAX_RD		14
-#define RIF_MAX_LEN		16
-
-#define TR_AC			0x10
-#define TR_LLC_FRAME		0x40
-
-#define TR_4MBPS		4000000
-#define TR_16MBPS		16000000
-#define TR_100MBPS		100000000
-
-/*
- * Source routing 
- */
-#define	TR_RII			0x80
-#define TR_RCF_BCST_MASK	0xe000
-#define TR_RCF_LEN_MASK		0x1f00
-#define TR_RCF_DIR		0x0080
-#define TR_RCF_LF_MASK		0x0070
-
-#define TR_RCF_RIFLEN(x)	((ntohs(x) & TR_RCF_LEN_MASK) >> 8)
-
-/*
- * Minimum and maximum packet payload lengths.
- */
-#define	ISO88025_MIN_LEN	0 
-#define	ISO88025_MAX_LEN_4	4464
-#define	ISO88025_MAX_LEN_16	17960	
-#define	ISO88025_MAX_LEN	ISO88025_MAX_LEN_16
-
-/*
- * A macro to validate a length with
- */
-#define	ISO88025_IS_VALID_LEN(foo)	\
-	((foo) >= ISO88025_MIN_LEN && (foo) <= ISO88025_MAX_LEN)
-
-/*
- * ISO 802.5 physical header
- */
-struct iso88025_header {
-	u_int8_t	ac;				    /* access control field */
-	u_int8_t	fc;				    /* frame control field */
-	u_int8_t	iso88025_dhost[ISO88025_ADDR_LEN];  /* destination address */
-	u_int8_t	iso88025_shost[ISO88025_ADDR_LEN];  /* source address */
-	u_int16_t	rcf;				    /* route control field */
-	u_int16_t	rd[RIF_MAX_RD];			    /* routing designators */
-} __attribute__ ((__packed__));
-
-struct iso88025_rif {
-	u_int16_t	rcf;				    /* route control field */
-	u_int16_t	rd[RIF_MAX_RD];			    /* routing designators */
-} __attribute__ ((__packed__));
-
-struct iso88025_sockaddr_data {
-	u_char ether_dhost[ISO88025_ADDR_LEN];
-	u_char ether_shost[ISO88025_ADDR_LEN];
-	u_char ac;
-	u_char fc;
-};
-
-struct iso88025_sockaddr_dl_data {
-	u_short	 trld_rcf;
-	u_short	*trld_route[RIF_MAX_LEN];
-};
-
-#define ISO88025_MIN(a, b)	(((a)<(b))?(a):(b))
-#define SDL_ISO88025(s)		((struct iso88025_sockaddr_dl_data *)	\
-				 ((s)->sdl_data + \
-				  ISO88025_MIN((s)->sdl_nlen + (s)->sdl_alen + \
-					       (s)->sdl_slen, 12)))
-
-/*
- * Structure of a 48-bit iso 802.5 address.
- *  ( We could also add the 16 bit addresses as a union)
- */
-struct	iso88025_addr {
-	u_char octet[ISO88025_ADDR_LEN];
-};
-
-#define ISO88025_MAX_MTU	18000
-#define ISO88025_DEFAULT_MTU	1500
-#define senderr(e) { error = (e); goto bad;}
-
-void	iso88025_ifattach	(struct ifnet *);
-void	iso88025_ifdetach	(struct ifnet *, int);
-int	iso88025_ioctl		(struct ifnet *, int , caddr_t );
-int	iso88025_output		(struct ifnet *, struct mbuf *, struct sockaddr *,
-				 struct rtentry *);
-void	iso88025_input		(struct ifnet *, struct iso88025_header *,
-				 struct mbuf *);
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/net_osdep.h b/newlib/libc/sys/linux/include/net/net_osdep.h
deleted file mode 100644
index 19c4b1a4a..000000000
--- a/newlib/libc/sys/linux/include/net/net_osdep.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/*	$FreeBSD: src/sys/net/net_osdep.h,v 1.8 2002/04/19 04:46:21 suz Exp $	*/
-/*	$KAME: net_osdep.h,v 1.68 2001/12/21 08:14:58 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * glue for kernel code programming differences.
- */
-
-/*
- * OS dependencies:
- * - ioctl
- *   FreeBSD 3 and later warn when sys/ioctl.h is included in a kernel source
- *   file.  For socket ioctl, we are suggested to use sys/sockio.h.
- *
- * - RTFREE()
- *   bsdi does not escape this macro using do-clause, so it is recommended
- *   to escape the macro explicitly.
- *   e.g.
- *	if (rt) {
- *		RTFREE(rt);
- *	}
- *
- * - whether the IPv4 input routine convert the byte order of some fileds
- *   of the IP header (x: convert to the host byte order, s: strip the header
- *   length for possible reassembly)
- *             ip_len ip_id ip_off
- * bsdi3:          xs     x      x
- * bsdi4:          xs            x
- * freebsd[23]:    xs     x      x 
- * freebsd4:       xs            x
- * NetBSD:          x            x
- * OpenBSD:        xs     x      x
- *
- * - ifa_ifwithaf()
- *   bsdi[34], netbsd, and openbsd define it in sys/net/if.c
- *   freebsd (all versions) does not have it.
- *  
- * - struct rt_addrinfo
- *   bsdi4, netbsd 1.5R and beyond: rti_addrs, rti_info[], rti_flags, rti_ifa,
- *	rti_ifp, and rti_rtm.
- *   others: rti_addrs and rti_info[] only.
- *
- * - ifa->ifa_rtrequest
- *   bsdi4, netbsd 1.5R and beyond: rt_addrinfo *
- *   others: sockaddr * (note that sys/net/route.c:rtrequest() has an unsafe
- *	typecast code, from 4.3BSD-reno)
- *
- * - side effects of rtrequest{,1}(RTM_DELETE)
- *	BSDI[34]: delete all cloned routes underneath the route.
- *	FreeBSD[234]: delete all protocol-cloned routes underneath the route.
- *		      note that cloned routes from an interface direct route
- *		      still remain.
- *	NetBSD: 1.5 have no side effects.  KAME/netbsd15, and post-1.5R, have
- *		the same effects as of BSDI.
- *	OpenBSD: have no side effects.  KAME/openbsd has the same effects as
- *		of BSDI (the change is not merged - yet).
- *
- * - privileged process
- *	NetBSD, FreeBSD 3
- *		struct proc *p;
- *		if (p && !suser(p->p_ucred, &p->p_acflag))
- *			privileged;
- *	FreeBSD 4
- *		struct proc *p;
- *		if (p && !suser(p))
- *			privileged;
- *	FreeBSD 5
- *		struct thread *td;
- *		if (suser(td))
- *			privileged;
- *	OpenBSD, BSDI [34], FreeBSD 2
- *		struct socket *so;
- *		if (so->so_state & SS_PRIV)
- *			privileged;
- * - foo_control
- *	NetBSD, FreeBSD 3
- *		needs to give struct proc * as argument
- *	OpenBSD, BSDI [34], FreeBSD 2
- *		do not need struct proc *
- *
- * - bpf:
- *	OpenBSD, NetBSD 1.5, BSDI [34]
- *		need caddr_t * (= if_bpf **) and struct ifnet *
- *	FreeBSD 2, FreeBSD 3, NetBSD post-1.5N
- *		need only struct ifnet * as argument
- *
- * - struct ifnet
- *			use queue.h?	member names	if name
- *			---		---		---
- *	FreeBSD 2	no		old standard	if_name+unit
- *	FreeBSD 3	yes		strange		if_name+unit
- *	OpenBSD		yes		standard	if_xname
- *	NetBSD		yes		standard	if_xname
- *	BSDI [34]	no		old standard	if_name+unit
- *
- * - usrreq
- *	NetBSD, OpenBSD, BSDI [34], FreeBSD 2
- *		single function with PRU_xx, arguments are mbuf
- *	FreeBSD 3
- *		separates functions, non-mbuf arguments
- *
- * - {set,get}sockopt
- *	NetBSD, OpenBSD, BSDI [34], FreeBSD 2
- *		manipulation based on mbuf
- *	FreeBSD 3
- *		non-mbuf manipulation using sooptcopy{in,out}()
- *
- * - timeout() and untimeout()
- *	NetBSD 1.4.x, OpenBSD, BSDI [34], FreeBSD 2
- *		timeout() is a void function
- *	FreeBSD 3
- *		timeout() is non-void, must keep returned value for untimeout()
- *		callout_xx is also available (sys/callout.h)
- *	NetBSD 1.5
- *		timeout() is obsoleted, use callout_xx (sys/callout.h)
- *	OpenBSD 2.8
- *		timeout_{add,set,del} is encouraged (sys/timeout.h)
- *
- * - kernel internal time structure
- *	FreeBSD 2, NetBSD, OpenBSD, BSD/OS
- *		mono_time.tv_u?sec, time.tv_u?sec
- *	FreeBSD [34]
- *		time_second
- *	if you need portability, #ifdef out FreeBSD[34], or use microtime(&tv)
- *	then touch tv.tv_sec (note: microtime is an expensive operation).
- *
- * - sysctl
- *	NetBSD, OpenBSD
- *		foo_sysctl()
- *	BSDI [34]
- *		foo_sysctl() but with different style.  sysctl_int_arr() takes
- *		care of most of the cases.
- *	FreeBSD
- *		linker hack.  however, there are freebsd version differences
- *		(how wonderful!).
- *		on FreeBSD[23] function arg #define includes paren.
- *			int foo SYSCTL_HANDLER_ARGS;
- *		on FreeBSD4, function arg #define does not include paren.
- *			int foo(SYSCTL_HANDLER_ARGS);
- *		on some versions, forward reference to the tree is okay.
- *		on some versions, you need SYSCTL_DECL().  you need things
- *		like this.
- *			#ifdef SYSCTL_DECL
- *			SYSCTL_DECL(net_inet_ip6);
- *			#endif
- *		it is hard to share functions between freebsd and non-freebsd.
- *
- * - if_ioctl
- *	NetBSD, FreeBSD 3, BSDI [34]
- *		2nd argument is u_long cmd
- *	FreeBSD 2
- *		2nd argument is int cmd
- *
- * - if attach routines
- *	NetBSD
- *		void xxattach(int);
- *	FreeBSD 2, FreeBSD 3
- *		void xxattach(void *);
- *		PSEUDO_SET(xxattach, if_xx);
- *
- * - ovbcopy()
- *	in NetBSD 1.4 or later, ovbcopy() is not supplied in the kernel.
- *	we have updated sys/systm.h to include declaration.
- *
- * - splnet()
- *	NetBSD 1.4 or later requires splsoftnet().
- *	other operating systems use splnet().
- *
- * - splimp()
- *	NetBSD-current (2001/4/13): use splnet() in network, splvm() in vm.
- *	other operating systems: use splimp().
- *
- * - dtom()
- *	NEVER USE IT!
- *
- * - struct ifnet for loopback interface
- *	BSDI3: struct ifnet loif;
- *	BSDI4: struct ifnet *loifp;
- *	NetBSD, OpenBSD 2.8, FreeBSD2: struct ifnet loif[NLOOP];
- *	OpenBSD 2.9: struct ifnet *lo0ifp;
- *
- *	odd thing is that many of them refers loif as ifnet *loif,
- *	not loif[NLOOP], from outside of if_loop.c.
- *
- * - number of bpf pseudo devices
- *	others: bpfilter.h, NBPFILTER
- *	FreeBSD4: bpf.h, NBPF
- *	solution:
- *		#if defined(__FreeBSD__) && __FreeBSD__ >= 4
- *		#include "bpf.h"
- *		#define NBPFILTER	NBPF
- *		#else
- *		#include "bpfilter.h"
- *		#endif
- *
- * - protosw for IPv4 (sys/netinet)
- *	FreeBSD4: struct ipprotosw in netinet/ipprotosw.h
- *	others: struct protosw in sys/protosw.h
- *
- * - protosw in general.
- *	NetBSD 1.5 has extra member for ipfilter (netbsd-current dropped
- *	it so it will go away in 1.6).
- *	NetBSD 1.5 requires PR_LISTEN flag bit with protocols that permit
- *	listen/accept (like tcp).
- *
- * - header files with defopt (opt_xx.h)
- *	FreeBSD3: opt_{inet,ipsec,ip6fw,altq}.h
- *	FreeBSD4: opt_{inet,inet6,ipsec,ip6fw,altq}.h
- *	NetBSD: opt_{inet,ipsec,altq}.h
- *	others: does not use defopt
- *
- * - IN_MULTICAST/IN_CLASS[A-D] macro.
- *	OpenBSD and NetBSD: net endian (kernel) or host endian (userland)
- *	others: always host endian
- *
- * - (m->m_flags & M_EXT) != 0 does *not* mean that the max data length of
- *   the mbuf == MCLBYTES.
- *
- * - sys/kern/uipc_mbuf.c:m_dup()
- *	freebsd[34]: copies the whole mbuf chain.
- *	netbsd: similar arg with m_copym().
- *	others: no m_dup().
- *
- * - ifa_refcnt (struct ifaddr) management (IFAREF/IFAFREE).
- *	NetBSD 1.5: always use IFAREF whenever reference gets added.
- *		always use IFAFREE whenever reference gets freed.
- *		IFAFREE frees ifaddr when ifa_refcnt reaches 0.
- *	others: do not increase refcnt for ifp->if_addrlist and in_ifaddr.
- *		use IFAFREE once when ifaddr is disconnected from
- *		ifp->if_addrlist and in_ifaddr.  IFAFREE frees ifaddr when
- *		ifa_refcnt goes negative.  in KAME environment, IFAREF is
- *		provided as a compatibility wrapper (use it instead of
- *		ifa_refcnt++ to reduce #ifdef).
- *
- * - ifnet.if_lastchange
- *	freebsd, bsdi, netbsd-current (jun 14 2001-),
- *	openbsd-current (jun 15 2001-): updated only when IFF_UP changes.
- *		(RFC1573 ifLastChange interpretation)
- *	netbsd151, openbsd29: updated whenever packets go through the interface.
- *		(4.4BSD interpretation)
- *
- * - kernel compilation options ("options HOGE" in kernel config file)
- *	freebsd4: sys/conf/options has to have mapping between option
- *		and a header file (opt_hoge.h).
- *	netbsd: by default, -DHOGE will go into
- *		sys/arch/foo/compile/BAR/Makefile.
- *		if you define mapping in sys/conf/files, you can create
- *		a header file like opt_hoge.h to help make dependencies.
- *	bsdi/openbsd: always use -DHOGE in Makefile.  there's no need/way
- *		to have opt_hoge.h.
- *
- *	therefore, opt_hoge.h is mandatory on freebsd4 only.
- *
- * - MALLOC() macro
- *	Use it only if the size of the allocation is constant.
- *	When we do NOT collect statistics about kernel memory usage, the result
- *	of macro expansion contains a large set of condition branches.  If the
- *	size is not constant, compilation optimization cannot be applied, and
- *	a bunch of the large branch will be embedded in the kernel code.
- *
- * - M_COPY_PKTHDR
- *	openbsd30: M_COPY_PKTHDR is deprecated.  use M_MOVE_PKTHDR or
- *		M_DUP_PKTHDR, depending on how you want to handle m_tag.
- *	others: M_COPY_PKTHDR is available as usual.
- */
-
-#ifndef __NET_NET_OSDEP_H_DEFINED_
-#define __NET_NET_OSDEP_H_DEFINED_
-#ifdef _KERNEL
-
-struct ifnet;
-extern const char *if_name(struct ifnet *);
-
-#define HAVE_OLD_BPF
-
-#define ifa_list	ifa_link
-#define if_addrlist	if_addrhead
-#define if_list		if_link
-
-/* sys/net/if.h */
-#define IFAREF(ifa)	do { ++(ifa)->ifa_refcnt; } while (0)
-
-#define WITH_CONVERT_AND_STRIP_IP_LEN
-
-#if 1				/* at this moment, all OSes do this */
-#define WITH_CONVERT_IP_OFF
-#endif
-
-/*
- * Deprecated.
- */
-#include <sys/module.h>
-#define	PSEUDO_SET(sym, name) \
-	static int name ## _modevent(module_t mod, int type, void *data) \
-	{ \
-		void (*initfunc)(void *) = (void (*)(void *))data; \
-		switch (type) { \
-		case MOD_LOAD: \
-			/* printf(#name " module load\n"); */ \
-			initfunc(NULL); \
-			break; \
-		case MOD_UNLOAD: \
-			printf(#name " module unload - not possible for this module type\n"); \
-			return EINVAL; \
-		} \
-		return 0; \
-	} \
-	static moduledata_t name ## _mod = { \
-		#name, \
-		name ## _modevent, \
-		(void *)sym \
-	}; \
-	DECLARE_MODULE(name, name ## _mod, SI_SUB_PSEUDO, SI_ORDER_ANY)
-
-#endif /*_KERNEL*/
-#endif /*__NET_NET_OSDEP_H_DEFINED_ */
diff --git a/newlib/libc/sys/linux/include/net/netisr.h b/newlib/libc/sys/linux/include/net/netisr.h
deleted file mode 100644
index 717e77bf2..000000000
--- a/newlib/libc/sys/linux/include/net/netisr.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 1980, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)netisr.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/netisr.h,v 1.26 2002/03/19 21:54:18 alfred Exp $
- */
-
-#ifndef _NET_NETISR_H_
-#define _NET_NETISR_H_
-
-/*
- * The networking code runs off software interrupts.
- *
- * You can switch into the network by doing splnet() and return by splx().
- * The software interrupt level for the network is higher than the software
- * level for the clock (so you can enter the network in routines called
- * at timeout time).
- */
-
-/*
- * Each ``pup-level-1'' input queue has a bit in a ``netisr'' status
- * word which is used to de-multiplex a single software
- * interrupt used for scheduling the network code to calls
- * on the lowest level routine of each protocol.
- */
-#define	NETISR_POLL	0		/* polling callback, must be first */
-#define	NETISR_IP	2		/* same as AF_INET */
-#define	NETISR_NS	6		/* same as AF_NS */
-#define	NETISR_ATALK    16              /* same as AF_APPLETALK */
-#define	NETISR_ARP	18		/* same as AF_LINK */
-#define	NETISR_IPX	23		/* same as AF_IPX */
-#define NETISR_USB	25		/* USB soft interrupt */
-#define	NETISR_PPP	27		/* PPP soft interrupt */
-#define	NETISR_IPV6	28		/* same as AF_INET6 */
-#define	NETISR_NATM	29		/* same as AF_NATM */
-#define	NETISR_ATM	30		/* same as AF_ATM */
-#define	NETISR_NETGRAPH	31		/* same as AF_NETGRAPH */
-
-
-#ifndef LOCORE
-#ifdef _KERNEL
-
-void legacy_setsoftnet(void);
-
-extern volatile unsigned int	netisr;	/* scheduling bits for network */
-extern	void	(*netisrs[32])(void);
-#define	schednetisr(anisr) do {						\
-	atomic_set_rel_int(&netisr, 1 << (anisr));			\
-	legacy_setsoftnet();						\
-} while (0)
-
-typedef void netisr_t(void);
-
-int register_netisr(int, netisr_t *);
-int unregister_netisr(int);
-
-#endif
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/pfil.h b/newlib/libc/sys/linux/include/net/pfil.h
deleted file mode 100644
index 48ed4b779..000000000
--- a/newlib/libc/sys/linux/include/net/pfil.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*	$FreeBSD: src/sys/net/pfil.h,v 1.9 2002/03/24 09:34:04 bde Exp $	*/
-
-/*
- * Copyright (c) 1996 Matthew R. Green
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NET_PFIL_H_
-#define _NET_PFIL_H_
-
-#include <sys/queue.h>
-
-struct mbuf;
-struct ifnet;
-
-/*
- * The packet filter hooks are designed for anything to call them to
- * possibly intercept the packet.
- */
-struct packet_filter_hook {
-        TAILQ_ENTRY(packet_filter_hook) pfil_link;
-	int	(*pfil_func)(void *, int, struct ifnet *, int, struct mbuf **);
-	int	pfil_flags;
-};
-
-#define PFIL_IN		0x00000001
-#define PFIL_OUT	0x00000002
-#define PFIL_WAITOK	0x00000004
-#define PFIL_ALL	(PFIL_IN|PFIL_OUT)
-
-typedef	TAILQ_HEAD(pfil_list, packet_filter_hook) pfil_list_t;
-
-struct pfil_head {
-	pfil_list_t	ph_in;
-	pfil_list_t	ph_out;
-	int		ph_init;
-};
-
-struct packet_filter_hook *pfil_hook_get(int, struct pfil_head *);
-int	pfil_add_hook(int (*func)(void *, int,
-	    struct ifnet *, int, struct mbuf **), int, struct pfil_head *);
-int	pfil_remove_hook(int (*func)(void *, int,
-	    struct ifnet *, int, struct mbuf **), int, struct pfil_head *);
-
-/* XXX */
-#if defined(_KERNEL) && !defined(KLD_MODULE)
-#include "opt_ipfilter.h"
-#endif
-
-#if IPFILTER > 0
-#ifdef PFIL_HOOKS
-#undef PFIL_HOOKS
-#endif
-#define PFIL_HOOKS
-#endif /* IPFILTER */
-
-#endif /* _NET_PFIL_H_ */
diff --git a/newlib/libc/sys/linux/include/net/pfkeyv2.h b/newlib/libc/sys/linux/include/net/pfkeyv2.h
deleted file mode 100644
index 229ef716c..000000000
--- a/newlib/libc/sys/linux/include/net/pfkeyv2.h
+++ /dev/null
@@ -1,392 +0,0 @@
-/*	$FreeBSD: src/sys/net/pfkeyv2.h,v 1.7 2001/08/06 19:39:59 ume Exp $	*/
-/*	$KAME: pfkeyv2.h,v 1.26 2001/06/27 10:49:49 sakane Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * This file has been derived rfc 2367,
- * And added some flags of SADB_KEY_FLAGS_ as SADB_X_EXT_.
- *	sakane@ydc.co.jp
- */
-
-#ifndef _NET_PFKEYV2_H_
-#define _NET_PFKEYV2_H_
-
-/*
-This file defines structures and symbols for the PF_KEY Version 2
-key management interface. It was written at the U.S. Naval Research
-Laboratory. This file is in the public domain. The authors ask that
-you leave this credit intact on any copies of this file.
-*/
-#ifndef __PFKEY_V2_H
-#define __PFKEY_V2_H 1
-
-#define PF_KEY_V2 2
-#define PFKEYV2_REVISION        199806L
-
-#define SADB_RESERVED    0
-#define SADB_GETSPI      1
-#define SADB_UPDATE      2
-#define SADB_ADD         3
-#define SADB_DELETE      4
-#define SADB_GET         5
-#define SADB_ACQUIRE     6
-#define SADB_REGISTER    7
-#define SADB_EXPIRE      8
-#define SADB_FLUSH       9
-#define SADB_DUMP        10
-#define SADB_X_PROMISC   11
-#define SADB_X_PCHANGE   12
-
-#define SADB_X_SPDUPDATE  13
-#define SADB_X_SPDADD     14
-#define SADB_X_SPDDELETE  15	/* by policy index */
-#define SADB_X_SPDGET     16
-#define SADB_X_SPDACQUIRE 17
-#define SADB_X_SPDDUMP    18
-#define SADB_X_SPDFLUSH   19
-#define SADB_X_SPDSETIDX  20
-#define SADB_X_SPDEXPIRE  21
-#define SADB_X_SPDDELETE2 22	/* by policy id */
-#define SADB_MAX          22
-
-struct sadb_msg {
-  u_int8_t sadb_msg_version;
-  u_int8_t sadb_msg_type;
-  u_int8_t sadb_msg_errno;
-  u_int8_t sadb_msg_satype;
-  u_int16_t sadb_msg_len;
-  u_int16_t sadb_msg_reserved;
-  u_int32_t sadb_msg_seq;
-  u_int32_t sadb_msg_pid;
-};
-
-struct sadb_ext {
-  u_int16_t sadb_ext_len;
-  u_int16_t sadb_ext_type;
-};
-
-struct sadb_sa {
-  u_int16_t sadb_sa_len;
-  u_int16_t sadb_sa_exttype;
-  u_int32_t sadb_sa_spi;
-  u_int8_t sadb_sa_replay;
-  u_int8_t sadb_sa_state;
-  u_int8_t sadb_sa_auth;
-  u_int8_t sadb_sa_encrypt;
-  u_int32_t sadb_sa_flags;
-};
-
-struct sadb_lifetime {
-  u_int16_t sadb_lifetime_len;
-  u_int16_t sadb_lifetime_exttype;
-  u_int32_t sadb_lifetime_allocations;
-  u_int64_t sadb_lifetime_bytes;
-  u_int64_t sadb_lifetime_addtime;
-  u_int64_t sadb_lifetime_usetime;
-};
-
-struct sadb_address {
-  u_int16_t sadb_address_len;
-  u_int16_t sadb_address_exttype;
-  u_int8_t sadb_address_proto;
-  u_int8_t sadb_address_prefixlen;
-  u_int16_t sadb_address_reserved;
-};
-
-struct sadb_key {
-  u_int16_t sadb_key_len;
-  u_int16_t sadb_key_exttype;
-  u_int16_t sadb_key_bits;
-  u_int16_t sadb_key_reserved;
-};
-
-struct sadb_ident {
-  u_int16_t sadb_ident_len;
-  u_int16_t sadb_ident_exttype;
-  u_int16_t sadb_ident_type;
-  u_int16_t sadb_ident_reserved;
-  u_int64_t sadb_ident_id;
-};
-
-struct sadb_sens {
-  u_int16_t sadb_sens_len;
-  u_int16_t sadb_sens_exttype;
-  u_int32_t sadb_sens_dpd;
-  u_int8_t sadb_sens_sens_level;
-  u_int8_t sadb_sens_sens_len;
-  u_int8_t sadb_sens_integ_level;
-  u_int8_t sadb_sens_integ_len;
-  u_int32_t sadb_sens_reserved;
-};
-
-struct sadb_prop {
-  u_int16_t sadb_prop_len;
-  u_int16_t sadb_prop_exttype;
-  u_int8_t sadb_prop_replay;
-  u_int8_t sadb_prop_reserved[3];
-};
-
-struct sadb_comb {
-  u_int8_t sadb_comb_auth;
-  u_int8_t sadb_comb_encrypt;
-  u_int16_t sadb_comb_flags;
-  u_int16_t sadb_comb_auth_minbits;
-  u_int16_t sadb_comb_auth_maxbits;
-  u_int16_t sadb_comb_encrypt_minbits;
-  u_int16_t sadb_comb_encrypt_maxbits;
-  u_int32_t sadb_comb_reserved;
-  u_int32_t sadb_comb_soft_allocations;
-  u_int32_t sadb_comb_hard_allocations;
-  u_int64_t sadb_comb_soft_bytes;
-  u_int64_t sadb_comb_hard_bytes;
-  u_int64_t sadb_comb_soft_addtime;
-  u_int64_t sadb_comb_hard_addtime;
-  u_int64_t sadb_comb_soft_usetime;
-  u_int64_t sadb_comb_hard_usetime;
-};
-
-struct sadb_supported {
-  u_int16_t sadb_supported_len;
-  u_int16_t sadb_supported_exttype;
-  u_int32_t sadb_supported_reserved;
-};
-
-struct sadb_alg {
-  u_int8_t sadb_alg_id;
-  u_int8_t sadb_alg_ivlen;
-  u_int16_t sadb_alg_minbits;
-  u_int16_t sadb_alg_maxbits;
-  u_int16_t sadb_alg_reserved;
-};
-
-struct sadb_spirange {
-  u_int16_t sadb_spirange_len;
-  u_int16_t sadb_spirange_exttype;
-  u_int32_t sadb_spirange_min;
-  u_int32_t sadb_spirange_max;
-  u_int32_t sadb_spirange_reserved;
-};
-
-struct sadb_x_kmprivate {
-  u_int16_t sadb_x_kmprivate_len;
-  u_int16_t sadb_x_kmprivate_exttype;
-  u_int32_t sadb_x_kmprivate_reserved;
-};
-
-/*
- * XXX Additional SA Extension.
- * mode: tunnel or transport
- * reqid: to make SA unique nevertheless the address pair of SA are same.
- *        Mainly it's for VPN.
- */
-struct sadb_x_sa2 {
-  u_int16_t sadb_x_sa2_len;
-  u_int16_t sadb_x_sa2_exttype;
-  u_int8_t sadb_x_sa2_mode;
-  u_int8_t sadb_x_sa2_reserved1;
-  u_int16_t sadb_x_sa2_reserved2;
-  u_int32_t sadb_x_sa2_sequence;
-  u_int32_t sadb_x_sa2_reqid;
-};
-
-/* XXX Policy Extension */
-/* sizeof(struct sadb_x_policy) == 16 */
-struct sadb_x_policy {
-  u_int16_t sadb_x_policy_len;
-  u_int16_t sadb_x_policy_exttype;
-  u_int16_t sadb_x_policy_type;		/* See policy type of ipsec.h */
-  u_int8_t sadb_x_policy_dir;		/* direction, see ipsec.h */
-  u_int8_t sadb_x_policy_reserved;
-  u_int32_t sadb_x_policy_id;
-  u_int32_t sadb_x_policy_reserved2;
-};
-/*
- * When policy_type == IPSEC, it is followed by some of
- * the ipsec policy request.
- * [total length of ipsec policy requests]
- *	= (sadb_x_policy_len * sizeof(uint64_t) - sizeof(struct sadb_x_policy))
- */
-
-/* XXX IPsec Policy Request Extension */
-/*
- * This structure is aligned 8 bytes.
- */
-struct sadb_x_ipsecrequest {
-  u_int16_t sadb_x_ipsecrequest_len;	/* structure length aligned to 8 bytes.
-					 * This value is true length of bytes.
-					 * Not in units of 64 bits. */
-  u_int16_t sadb_x_ipsecrequest_proto;	/* See ipsec.h */
-  u_int8_t sadb_x_ipsecrequest_mode;	/* See IPSEC_MODE_XX in ipsec.h. */
-  u_int8_t sadb_x_ipsecrequest_level;	/* See IPSEC_LEVEL_XX in ipsec.h */
-  u_int16_t sadb_x_ipsecrequest_reqid;	/* See ipsec.h */
-
-  /*
-   * followed by source IP address of SA, and immediately followed by
-   * destination IP address of SA.  These encoded into two of sockaddr
-   * structure without any padding.  Must set each sa_len exactly.
-   * Each of length of the sockaddr structure are not aligned to 64bits,
-   * but sum of x_request and addresses is aligned to 64bits.
-   */
-};
-
-#define SADB_EXT_RESERVED             0
-#define SADB_EXT_SA                   1
-#define SADB_EXT_LIFETIME_CURRENT     2
-#define SADB_EXT_LIFETIME_HARD        3
-#define SADB_EXT_LIFETIME_SOFT        4
-#define SADB_EXT_ADDRESS_SRC          5
-#define SADB_EXT_ADDRESS_DST          6
-#define SADB_EXT_ADDRESS_PROXY        7
-#define SADB_EXT_KEY_AUTH             8
-#define SADB_EXT_KEY_ENCRYPT          9
-#define SADB_EXT_IDENTITY_SRC         10
-#define SADB_EXT_IDENTITY_DST         11
-#define SADB_EXT_SENSITIVITY          12
-#define SADB_EXT_PROPOSAL             13
-#define SADB_EXT_SUPPORTED_AUTH       14
-#define SADB_EXT_SUPPORTED_ENCRYPT    15
-#define SADB_EXT_SPIRANGE             16
-#define SADB_X_EXT_KMPRIVATE          17
-#define SADB_X_EXT_POLICY             18
-#define SADB_X_EXT_SA2                19
-#define SADB_EXT_MAX                  19
-
-#define SADB_SATYPE_UNSPEC	0
-#define SADB_SATYPE_AH		2
-#define SADB_SATYPE_ESP		3
-#define SADB_SATYPE_RSVP	5
-#define SADB_SATYPE_OSPFV2	6
-#define SADB_SATYPE_RIPV2	7
-#define SADB_SATYPE_MIP		8
-#define SADB_X_SATYPE_IPCOMP	9
-#define SADB_X_SATYPE_POLICY	10
-#define SADB_SATYPE_MAX		11
-
-#define SADB_SASTATE_LARVAL   0
-#define SADB_SASTATE_MATURE   1
-#define SADB_SASTATE_DYING    2
-#define SADB_SASTATE_DEAD     3
-#define SADB_SASTATE_MAX      3
-
-#define SADB_SAFLAGS_PFS      1
-
-/* RFC2367 numbers - meets RFC2407 */
-#define SADB_AALG_NONE		0
-#define SADB_AALG_MD5HMAC	1	/*2*/
-#define SADB_AALG_SHA1HMAC	2	/*3*/
-#define SADB_AALG_MAX		8
-/* private allocations - based on RFC2407/IANA assignment */
-#define SADB_X_AALG_SHA2_256	6	/*5*/
-#define SADB_X_AALG_SHA2_384	7	/*6*/
-#define SADB_X_AALG_SHA2_512	8	/*7*/
-/* private allocations should use 249-255 (RFC2407) */
-#define SADB_X_AALG_MD5		3	/*249*/	/* Keyed MD5 */
-#define SADB_X_AALG_SHA		4	/*250*/	/* Keyed SHA */
-#define SADB_X_AALG_NULL	5	/*251*/	/* null authentication */
-
-/* RFC2367 numbers - meets RFC2407 */
-#define SADB_EALG_NONE		0
-#define SADB_EALG_DESCBC	1	/*2*/
-#define SADB_EALG_3DESCBC	2	/*3*/
-#define SADB_EALG_NULL		3	/*11*/
-#define SADB_EALG_MAX		12
-/* private allocations - based on RFC2407/IANA assignment */
-#define SADB_X_EALG_CAST128CBC	5	/*6*/
-#define SADB_X_EALG_BLOWFISHCBC	4	/*7*/
-#define SADB_X_EALG_RIJNDAELCBC	12
-#define SADB_X_EALG_AES		12
-/* private allocations should use 249-255 (RFC2407) */
-
-#if 1	/*nonstandard */
-#define SADB_X_CALG_NONE	0
-#define SADB_X_CALG_OUI		1
-#define SADB_X_CALG_DEFLATE	2
-#define SADB_X_CALG_LZS		3
-#define SADB_X_CALG_MAX		4
-#endif
-
-#define SADB_IDENTTYPE_RESERVED   0
-#define SADB_IDENTTYPE_PREFIX     1
-#define SADB_IDENTTYPE_FQDN       2
-#define SADB_IDENTTYPE_USERFQDN   3
-#define SADB_X_IDENTTYPE_ADDR     4
-#define SADB_IDENTTYPE_MAX        4
-
-/* `flags' in sadb_sa structure holds followings */
-#define SADB_X_EXT_NONE		0x0000	/* i.e. new format. */
-#define SADB_X_EXT_OLD		0x0001	/* old format. */
-
-#define SADB_X_EXT_IV4B		0x0010	/* IV length of 4 bytes in use */
-#define SADB_X_EXT_DERIV	0x0020	/* DES derived */
-#define SADB_X_EXT_CYCSEQ	0x0040	/* allowing to cyclic sequence. */
-
-	/* three of followings are exclusive flags each them */
-#define SADB_X_EXT_PSEQ		0x0000	/* sequencial padding for ESP */
-#define SADB_X_EXT_PRAND	0x0100	/* random padding for ESP */
-#define SADB_X_EXT_PZERO	0x0200	/* zero padding for ESP */
-#define SADB_X_EXT_PMASK	0x0300	/* mask for padding flag */
-
-#if 1
-#define SADB_X_EXT_RAWCPI	0x0080	/* use well known CPI (IPComp) */
-#endif
-
-#define SADB_KEY_FLAGS_MAX	0x0fff
-
-/* SPI size for PF_KEYv2 */
-#define PFKEY_SPI_SIZE	sizeof(u_int32_t)
-
-/* Identifier for menber of lifetime structure */
-#define SADB_X_LIFETIME_ALLOCATIONS	0
-#define SADB_X_LIFETIME_BYTES		1
-#define SADB_X_LIFETIME_ADDTIME		2
-#define SADB_X_LIFETIME_USETIME		3
-
-/* The rate for SOFT lifetime against HARD one. */
-#define PFKEY_SOFT_LIFETIME_RATE	80
-
-/* Utilities */
-#define PFKEY_ALIGN8(a) (1 + (((a) - 1) | (8 - 1)))
-#define	PFKEY_EXTLEN(msg) \
-	PFKEY_UNUNIT64(((struct sadb_ext *)(msg))->sadb_ext_len)
-#define PFKEY_ADDR_PREFIX(ext) \
-	(((struct sadb_address *)(ext))->sadb_address_prefixlen)
-#define PFKEY_ADDR_PROTO(ext) \
-	(((struct sadb_address *)(ext))->sadb_address_proto)
-#define PFKEY_ADDR_SADDR(ext) \
-	((struct sockaddr *)((caddr_t)(ext) + sizeof(struct sadb_address)))
-
-/* in 64bits */
-#define	PFKEY_UNUNIT64(a)	((a) << 3)
-#define	PFKEY_UNIT64(a)		((a) >> 3)
-
-#endif /* __PFKEY_V2_H */
-
-#endif /* _NET_PFKEYV2_H_ */
diff --git a/newlib/libc/sys/linux/include/net/ppp_comp.h b/newlib/libc/sys/linux/include/net/ppp_comp.h
deleted file mode 100644
index 9f63329f5..000000000
--- a/newlib/libc/sys/linux/include/net/ppp_comp.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * ppp_comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $FreeBSD: src/sys/net/ppp_comp.h,v 1.11 2002/03/24 09:34:04 bde Exp $
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * Structure giving methods for compression/decompression.
- */
-#ifdef PACKETPTR
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc)(u_char *options, int opt_len);
-	/* Free space used by a compressor */
-	void	(*comp_free)(void *state);
-	/* Initialize a compressor */
-	int	(*comp_init)(void *state, u_char *options, int opt_len,
-		    int unit, int hdrlen, int debug);
-	/* Reset a compressor */
-	void	(*comp_reset)(void *state);
-	/* Compress a packet */
-	int	(*compress)(void *state, PACKETPTR *mret, PACKETPTR mp,
-		    int orig_len, int max_len);
-	/* Return compression statistics */
-	void	(*comp_stat)(void *state, struct compstat *stats);
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc)(u_char *options, int opt_len);
-	/* Free space used by a decompressor */
-	void	(*decomp_free)(void *state);
-	/* Initialize a decompressor */
-	int	(*decomp_init)(void *state, u_char *options, int opt_len,
-		    int unit, int hdrlen, int mru, int debug);
-	/* Reset a decompressor */
-	void	(*decomp_reset)(void *state);
-	/* Decompress a packet. */
-	int	(*decompress)(void *state, PACKETPTR mp, PACKETPTR *dmpp);
-	/* Update state for an incompressible packet received */
-	void	(*incomp)(void *state, PACKETPTR mp);
-	/* Return decompression statistics */
-	void	(*decomp_stat)(void *state, struct compstat *stats);
-};
-#endif /* PACKETPTR */
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK		0	/* everything went OK */
-#define DECOMP_ERROR		1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/newlib/libc/sys/linux/include/net/ppp_defs.h b/newlib/libc/sys/linux/include/net/ppp_defs.h
deleted file mode 100644
index 11a3fef1d..000000000
--- a/newlib/libc/sys/linux/include/net/ppp_defs.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $FreeBSD: src/sys/net/ppp_defs.h,v 1.7 2001/06/11 12:38:58 ume Exp $
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((u_char *)(p))[0])
-#define PPP_CONTROL(p)	(((u_char *)(p))[1])
-#define PPP_PROTOCOL(p)	((((u_char *)(p))[2] << 8) + ((u_char *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define	PPP_XNS		0x25	/* Xerox NS */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX Datagram (RFC1552) */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol (RFC1552) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol version 6*/
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-#define PPP_FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-typedef u_int32_t	ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics.
- */
-struct pppstat	{
-    unsigned int ppp_ibytes;	/* bytes received */
-    unsigned int ppp_ipackets;	/* packets received */
-    unsigned int ppp_ierrors;	/* receive errors */
-    unsigned int ppp_obytes;	/* bytes sent */
-    unsigned int ppp_opackets;	/* packets sent */
-    unsigned int ppp_oerrors;	/* transmit errors */
-};
-
-struct vjstat {
-    unsigned int vjs_packets;	/* outbound packets */
-    unsigned int vjs_compressed; /* outbound compressed packets */
-    unsigned int vjs_searches;	/* searches for connection state */
-    unsigned int vjs_misses;	/* times couldn't find conn. state */
-    unsigned int vjs_uncompressedin; /* inbound uncompressed packets */
-    unsigned int vjs_compressedin; /* inbound compressed packets */
-    unsigned int vjs_errorin;	/* inbound unknown type packets */
-    unsigned int vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct ppp_stats {
-    struct pppstat p;		/* basic PPP statistics */
-    struct vjstat vj;		/* VJ header compression statistics */
-};
-
-struct compstat {
-    unsigned int unc_bytes;	/* total uncompressed bytes */
-    unsigned int unc_packets;	/* total uncompressed packets */
-    unsigned int comp_bytes;	/* compressed bytes */
-    unsigned int comp_packets;	/* compressed packets */
-    unsigned int inc_bytes;	/* incompressible bytes */
-    unsigned int inc_packets;	/* incompressible packets */
-    unsigned int ratio;		/* recent compression ratio << 8 */
-};
-
-struct ppp_comp_stats {
-    struct compstat c;		/* packet compression statistics */
-    struct compstat d;		/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    time_t xmit_idle;		/* time since last NP packet sent */
-    time_t recv_idle;		/* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/newlib/libc/sys/linux/include/net/radix.h b/newlib/libc/sys/linux/include/net/radix.h
deleted file mode 100644
index 7f1984e96..000000000
--- a/newlib/libc/sys/linux/include/net/radix.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (c) 1988, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)radix.h	8.2 (Berkeley) 10/31/94
- * $FreeBSD: src/sys/net/radix.h,v 1.18 2002/03/19 21:54:18 alfred Exp $
- */
-
-#ifndef _RADIX_H_
-#define	_RADIX_H_
-
-#ifdef MALLOC_DECLARE
-MALLOC_DECLARE(M_RTABLE);
-#endif
-
-/*
- * Radix search tree node layout.
- */
-
-struct radix_node {
-	struct	radix_mask *rn_mklist;	/* list of masks contained in subtree */
-	struct	radix_node *rn_parent;	/* parent */
-	short	rn_bit;			/* bit offset; -1-index(netmask) */
-	char	rn_bmask;		/* node: mask for bit test*/
-	u_char	rn_flags;		/* enumerated next */
-#define RNF_NORMAL	1		/* leaf contains normal route */
-#define RNF_ROOT	2		/* leaf is root leaf for tree */
-#define RNF_ACTIVE	4		/* This node is alive (for rtfree) */
-	union {
-		struct {			/* leaf only data: */
-			caddr_t	rn_Key;		/* object of search */
-			caddr_t	rn_Mask;	/* netmask, if present */
-			struct	radix_node *rn_Dupedkey;
-		} rn_leaf;
-		struct {			/* node only data: */
-			int	rn_Off;		/* where to start compare */
-			struct	radix_node *rn_L;/* progeny */
-			struct	radix_node *rn_R;/* progeny */
-		} rn_node;
-	}		rn_u;
-#ifdef RN_DEBUG
-	int rn_info;
-	struct radix_node *rn_twin;
-	struct radix_node *rn_ybro;
-#endif
-};
-
-#define	rn_dupedkey	rn_u.rn_leaf.rn_Dupedkey
-#define	rn_key		rn_u.rn_leaf.rn_Key
-#define	rn_mask		rn_u.rn_leaf.rn_Mask
-#define	rn_offset	rn_u.rn_node.rn_Off
-#define	rn_left		rn_u.rn_node.rn_L
-#define	rn_right	rn_u.rn_node.rn_R
-
-/*
- * Annotations to tree concerning potential routes applying to subtrees.
- */
-
-struct radix_mask {
-	short	rm_bit;			/* bit offset; -1-index(netmask) */
-	char	rm_unused;		/* cf. rn_bmask */
-	u_char	rm_flags;		/* cf. rn_flags */
-	struct	radix_mask *rm_mklist;	/* more masks to try */
-	union	{
-		caddr_t	rmu_mask;		/* the mask */
-		struct	radix_node *rmu_leaf;	/* for normal routes */
-	}	rm_rmu;
-	int	rm_refs;		/* # of references to this struct */
-};
-
-#define	rm_mask rm_rmu.rmu_mask
-#define	rm_leaf rm_rmu.rmu_leaf		/* extra field would make 32 bytes */
-
-#define MKGet(m) {\
-	if (rn_mkfreelist) {\
-		m = rn_mkfreelist; \
-		rn_mkfreelist = (m)->rm_mklist; \
-	} else \
-		R_Malloc(m, struct radix_mask *, sizeof (*(m))); }\
-
-#define MKFree(m) { (m)->rm_mklist = rn_mkfreelist; rn_mkfreelist = (m);}
-
-typedef int walktree_f_t(struct radix_node *, void *);
-
-struct radix_node_head {
-	struct	radix_node *rnh_treetop;
-	int	rnh_addrsize;		/* permit, but not require fixed keys */
-	int	rnh_pktsize;		/* permit, but not require fixed keys */
-	struct	radix_node *(*rnh_addaddr)	/* add based on sockaddr */
-		(void *v, void *mask,
-		     struct radix_node_head *head, struct radix_node nodes[]);
-	struct	radix_node *(*rnh_addpkt)	/* add based on packet hdr */
-		(void *v, void *mask,
-		     struct radix_node_head *head, struct radix_node nodes[]);
-	struct	radix_node *(*rnh_deladdr)	/* remove based on sockaddr */
-		(void *v, void *mask, struct radix_node_head *head);
-	struct	radix_node *(*rnh_delpkt)	/* remove based on packet hdr */
-		(void *v, void *mask, struct radix_node_head *head);
-	struct	radix_node *(*rnh_matchaddr)	/* locate based on sockaddr */
-		(void *v, struct radix_node_head *head);
-	struct	radix_node *(*rnh_lookup)	/* locate based on sockaddr */
-		(void *v, void *mask, struct radix_node_head *head);
-	struct	radix_node *(*rnh_matchpkt)	/* locate based on packet hdr */
-		(void *v, struct radix_node_head *head);
-	int	(*rnh_walktree)			/* traverse tree */
-		(struct radix_node_head *head, walktree_f_t *f, void *w);
-	int	(*rnh_walktree_from)		/* traverse tree below a */
-		(struct radix_node_head *head, void *a, void *m,
-		     walktree_f_t *f, void *w);
-	void	(*rnh_close)	/* do something when the last ref drops */
-		(struct radix_node *rn, struct radix_node_head *head);
-	struct	radix_node rnh_nodes[3];	/* empty tree for common case */
-};
-
-#ifndef _KERNEL
-#define Bcmp(a, b, n) bcmp(((char *)(a)), ((char *)(b)), (n))
-#define Bcopy(a, b, n) bcopy(((char *)(a)), ((char *)(b)), (unsigned)(n))
-#define Bzero(p, n) bzero((char *)(p), (int)(n));
-#define R_Malloc(p, t, n) (p = (t) malloc((unsigned int)(n)))
-#define Free(p) free((char *)p);
-#else
-#define Bcmp(a, b, n) bcmp(((caddr_t)(a)), ((caddr_t)(b)), (unsigned)(n))
-#define Bcopy(a, b, n) bcopy(((caddr_t)(a)), ((caddr_t)(b)), (unsigned)(n))
-#define Bzero(p, n) bzero((caddr_t)(p), (unsigned)(n));
-#define R_Malloc(p, t, n) (p = (t) malloc((unsigned long)(n), M_RTABLE, M_DONTWAIT))
-#define Free(p) free((caddr_t)p, M_RTABLE);
-#endif /* _KERNEL */
-
-void	 rn_init(void);
-int	 rn_inithead(void **, int);
-int	 rn_refines(void *, void *);
-struct radix_node
-	 *rn_addmask(void *, int, int),
-	 *rn_addroute (void *, void *, struct radix_node_head *,
-			struct radix_node [2]),
-	 *rn_delete(void *, void *, struct radix_node_head *),
-	 *rn_lookup (void *v_arg, void *m_arg,
-		        struct radix_node_head *head),
-	 *rn_match(void *, struct radix_node_head *);
-
-
-#endif /* _RADIX_H_ */
diff --git a/newlib/libc/sys/linux/include/net/raw_cb.h b/newlib/libc/sys/linux/include/net/raw_cb.h
deleted file mode 100644
index d17712d30..000000000
--- a/newlib/libc/sys/linux/include/net/raw_cb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (c) 1980, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)raw_cb.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/net/raw_cb.h,v 1.16 2002/03/19 21:54:18 alfred Exp $
- */
-
-#ifndef _NET_RAW_CB_H_
-#define _NET_RAW_CB_H_
-
-#include <sys/queue.h>
-
-/*
- * Raw protocol interface control block.  Used
- * to tie a socket to the generic raw interface.
- */
-struct rawcb {
-	LIST_ENTRY(rawcb) list;
-	struct	socket *rcb_socket;	/* back pointer to socket */
-	struct	sockaddr *rcb_faddr;	/* destination address */
-	struct	sockaddr *rcb_laddr;	/* socket's address */
-	struct	sockproto rcb_proto;	/* protocol family, protocol */
-};
-
-#define	sotorawcb(so)		((struct rawcb *)(so)->so_pcb)
-
-/*
- * Nominal space allocated to a raw socket.
- */
-#define	RAWSNDQ		8192
-#define	RAWRCVQ		8192
-
-#ifdef _KERNEL
-extern LIST_HEAD(rawcb_list_head, rawcb) rawcb_list;
-
-/* protosw entries */
-pr_ctlinput_t	raw_ctlinput;
-pr_init_t	raw_init;
-
-/* usrreq entries */
-int	 raw_attach(struct socket *, int);
-void	 raw_detach(struct rawcb *);
-void	 raw_disconnect(struct rawcb *);
-
-#if 0 /* what the ??? */
-pr_input_t	raw_input;
-#else
-void	 raw_input(struct mbuf *,
-	    struct sockproto *, struct sockaddr *, struct sockaddr *);
-#endif
-
-extern	struct pr_usrreqs raw_usrreqs;
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/route.h b/newlib/libc/sys/linux/include/net/route.h
deleted file mode 100644
index c60bf3537..000000000
--- a/newlib/libc/sys/linux/include/net/route.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright (c) 1980, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)route.h	8.4 (Berkeley) 1/9/95
- * $FreeBSD: src/sys/net/route.h,v 1.45 2002/03/24 09:34:04 bde Exp $
- */
-
-#ifndef _NET_ROUTE_H_
-#define _NET_ROUTE_H_
-
-/*
- * Kernel resident routing tables.
- *
- * The routing tables are initialized when interface addresses
- * are set by making entries for all directly connected interfaces.
- */
-
-/*
- * A route consists of a destination address and a reference
- * to a routing entry.  These are often held by protocols
- * in their control blocks, e.g. inpcb.
- */
-struct route {
-	struct	rtentry *ro_rt;
-	struct	sockaddr ro_dst;
-};
-
-/*
- * These numbers are used by reliable protocols for determining
- * retransmission behavior and are included in the routing structure.
- */
-struct rt_metrics {
-	u_long	rmx_locks;	/* Kernel must leave these values alone */
-	u_long	rmx_mtu;	/* MTU for this path */
-	u_long	rmx_hopcount;	/* max hops expected */
-	u_long	rmx_expire;	/* lifetime for route, e.g. redirect */
-	u_long	rmx_recvpipe;	/* inbound delay-bandwidth product */
-	u_long	rmx_sendpipe;	/* outbound delay-bandwidth product */
-	u_long	rmx_ssthresh;	/* outbound gateway buffer limit */
-	u_long	rmx_rtt;	/* estimated round trip time */
-	u_long	rmx_rttvar;	/* estimated rtt variance */
-	u_long	rmx_pksent;	/* packets sent using this route */
-	u_long	rmx_filler[4];	/* will be used for T/TCP later */
-};
-
-/*
- * rmx_rtt and rmx_rttvar are stored as microseconds;
- * RTTTOPRHZ(rtt) converts to a value suitable for use
- * by a protocol slowtimo counter.
- */
-#define	RTM_RTTUNIT	1000000	/* units for rtt, rttvar, as units per sec */
-#define	RTTTOPRHZ(r)	((r) / (RTM_RTTUNIT / PR_SLOWHZ))
-
-/*
- * XXX kernel function pointer `rt_output' is visible to applications.
- */
-struct mbuf;
-
-/*
- * We distinguish between routes to hosts and routes to networks,
- * preferring the former if available.  For each route we infer
- * the interface to use from the gateway address supplied when
- * the route was entered.  Routes that forward packets through
- * gateways are marked so that the output routines know to address the
- * gateway rather than the ultimate destination.
- */
-#ifndef RNF_NORMAL
-#include <net/radix.h>
-#endif
-struct rtentry {
-	struct	radix_node rt_nodes[2];	/* tree glue, and other values */
-#define	rt_key(r)	((struct sockaddr *)((r)->rt_nodes->rn_key))
-#define	rt_mask(r)	((struct sockaddr *)((r)->rt_nodes->rn_mask))
-	struct	sockaddr *rt_gateway;	/* value */
-	long	rt_refcnt;		/* # held references */
-	u_long	rt_flags;		/* up/down?, host/net */
-	struct	ifnet *rt_ifp;		/* the answer: interface to use */
-	struct	ifaddr *rt_ifa;		/* the answer: interface to use */
-	struct	sockaddr *rt_genmask;	/* for generation of cloned routes */
-	caddr_t	rt_llinfo;		/* pointer to link level info cache */
-	struct	rt_metrics rt_rmx;	/* metrics used by rx'ing protocols */
-	struct	rtentry *rt_gwroute;	/* implied entry for gatewayed routes */
-	int	(*rt_output)(struct ifnet *, struct mbuf *, struct sockaddr *,
-		    struct rtentry *);
-					/* output routine for this (rt,if) */
-	struct	rtentry *rt_parent; 	/* cloning parent of this route */
-	void	*rt_filler2;		/* more filler */
-};
-
-/*
- * Following structure necessary for 4.3 compatibility;
- * We should eventually move it to a compat file.
- */
-struct ortentry {
-	u_long	rt_hash;		/* to speed lookups */
-	struct	sockaddr rt_dst;	/* key */
-	struct	sockaddr rt_gateway;	/* value */
-	short	rt_flags;		/* up/down?, host/net */
-	short	rt_refcnt;		/* # held references */
-	u_long	rt_use;			/* raw # packets forwarded */
-	struct	ifnet *rt_ifp;		/* the answer: interface to use */
-};
-
-#define rt_use rt_rmx.rmx_pksent
-
-#define	RTF_UP		0x1		/* route usable */
-#define	RTF_GATEWAY	0x2		/* destination is a gateway */
-#define	RTF_HOST	0x4		/* host entry (net otherwise) */
-#define	RTF_REJECT	0x8		/* host or net unreachable */
-#define	RTF_DYNAMIC	0x10		/* created dynamically (by redirect) */
-#define	RTF_MODIFIED	0x20		/* modified dynamically (by redirect) */
-#define RTF_DONE	0x40		/* message confirmed */
-/*			0x80		   unused, was RTF_DELCLONE */
-#define RTF_CLONING	0x100		/* generate new routes on use */
-#define RTF_XRESOLVE	0x200		/* external daemon resolves name */
-#define RTF_LLINFO	0x400		/* generated by link layer (e.g. ARP) */
-#define RTF_STATIC	0x800		/* manually added */
-#define RTF_BLACKHOLE	0x1000		/* just discard pkts (during updates) */
-#define RTF_PROTO2	0x4000		/* protocol specific routing flag */
-#define RTF_PROTO1	0x8000		/* protocol specific routing flag */
-
-#define RTF_PRCLONING	0x10000		/* protocol requires cloning */
-#define RTF_WASCLONED	0x20000		/* route generated through cloning */
-#define RTF_PROTO3	0x40000		/* protocol specific routing flag */
-/*			0x80000		   unused */
-#define RTF_PINNED	0x100000	/* future use */
-#define	RTF_LOCAL	0x200000 	/* route represents a local address */
-#define	RTF_BROADCAST	0x400000	/* route represents a bcast address */
-#define	RTF_MULTICAST	0x800000	/* route represents a mcast address */
-					/* 0x1000000 and up unassigned */
-
-/*
- * Routing statistics.
- */
-struct	rtstat {
-	short	rts_badredirect;	/* bogus redirect calls */
-	short	rts_dynamic;		/* routes created by redirects */
-	short	rts_newgateway;		/* routes modified by redirects */
-	short	rts_unreach;		/* lookups which failed */
-	short	rts_wildcard;		/* lookups satisfied by a wildcard */
-};
-/*
- * Structures for routing messages.
- */
-struct rt_msghdr {
-	u_short	rtm_msglen;	/* to skip over non-understood messages */
-	u_char	rtm_version;	/* future binary compatibility */
-	u_char	rtm_type;	/* message type */
-	u_short	rtm_index;	/* index for associated ifp */
-	int	rtm_flags;	/* flags, incl. kern & message, e.g. DONE */
-	int	rtm_addrs;	/* bitmask identifying sockaddrs in msg */
-	pid_t	rtm_pid;	/* identify sender */
-	int	rtm_seq;	/* for sender to identify action */
-	int	rtm_errno;	/* why failed */
-	int	rtm_use;	/* from rtentry */
-	u_long	rtm_inits;	/* which metrics we are initializing */
-	struct	rt_metrics rtm_rmx; /* metrics themselves */
-};
-
-#define RTM_VERSION	5	/* Up the ante and ignore older versions */
-
-/*
- * Message types.
- */
-#define RTM_ADD		0x1	/* Add Route */
-#define RTM_DELETE	0x2	/* Delete Route */
-#define RTM_CHANGE	0x3	/* Change Metrics or flags */
-#define RTM_GET		0x4	/* Report Metrics */
-#define RTM_LOSING	0x5	/* Kernel Suspects Partitioning */
-#define RTM_REDIRECT	0x6	/* Told to use different route */
-#define RTM_MISS	0x7	/* Lookup failed on this address */
-#define RTM_LOCK	0x8	/* fix specified metrics */
-#define RTM_OLDADD	0x9	/* caused by SIOCADDRT */
-#define RTM_OLDDEL	0xa	/* caused by SIOCDELRT */
-#define RTM_RESOLVE	0xb	/* req to resolve dst to LL addr */
-#define RTM_NEWADDR	0xc	/* address being added to iface */
-#define RTM_DELADDR	0xd	/* address being removed from iface */
-#define RTM_IFINFO	0xe	/* iface going up/down etc. */
-#define	RTM_NEWMADDR	0xf	/* mcast group membership being added to if */
-#define	RTM_DELMADDR	0x10	/* mcast group membership being deleted */
-#define	RTM_IFANNOUNCE	0x11	/* iface arrival/departure */
-
-/*
- * Bitmask values for rtm_inits and rmx_locks.
- */
-#define RTV_MTU		0x1	/* init or lock _mtu */
-#define RTV_HOPCOUNT	0x2	/* init or lock _hopcount */
-#define RTV_EXPIRE	0x4	/* init or lock _expire */
-#define RTV_RPIPE	0x8	/* init or lock _recvpipe */
-#define RTV_SPIPE	0x10	/* init or lock _sendpipe */
-#define RTV_SSTHRESH	0x20	/* init or lock _ssthresh */
-#define RTV_RTT		0x40	/* init or lock _rtt */
-#define RTV_RTTVAR	0x80	/* init or lock _rttvar */
-
-/*
- * Bitmask values for rtm_addrs.
- */
-#define RTA_DST		0x1	/* destination sockaddr present */
-#define RTA_GATEWAY	0x2	/* gateway sockaddr present */
-#define RTA_NETMASK	0x4	/* netmask sockaddr present */
-#define RTA_GENMASK	0x8	/* cloning mask sockaddr present */
-#define RTA_IFP		0x10	/* interface name sockaddr present */
-#define RTA_IFA		0x20	/* interface addr sockaddr present */
-#define RTA_AUTHOR	0x40	/* sockaddr for author of redirect */
-#define RTA_BRD		0x80	/* for NEWADDR, broadcast or p-p dest addr */
-
-/*
- * Index offsets for sockaddr array for alternate internal encoding.
- */
-#define RTAX_DST	0	/* destination sockaddr present */
-#define RTAX_GATEWAY	1	/* gateway sockaddr present */
-#define RTAX_NETMASK	2	/* netmask sockaddr present */
-#define RTAX_GENMASK	3	/* cloning mask sockaddr present */
-#define RTAX_IFP	4	/* interface name sockaddr present */
-#define RTAX_IFA	5	/* interface addr sockaddr present */
-#define RTAX_AUTHOR	6	/* sockaddr for author of redirect */
-#define RTAX_BRD	7	/* for NEWADDR, broadcast or p-p dest addr */
-#define RTAX_MAX	8	/* size of array to allocate */
-
-struct rt_addrinfo {
-	int	rti_addrs;
-	struct	sockaddr *rti_info[RTAX_MAX];
-	int	rti_flags;
-	struct	ifaddr *rti_ifa;
-	struct	ifnet *rti_ifp;
-};
-
-struct route_cb {
-	int	ip_count;
-	int	ip6_count;
-	int	ipx_count;
-	int	ns_count;
-	int	any_count;
-};
-
-#ifdef _KERNEL
-#define	RTFREE(rt) \
-	do { \
-		if ((rt)->rt_refcnt <= 1) \
-			rtfree(rt); \
-		else \
-			(rt)->rt_refcnt--; \
-	} while (0)
-
-extern struct route_cb route_cb;
-extern struct radix_node_head *rt_tables[AF_MAX+1];
-
-struct ifmultiaddr;
-
-void	 route_init(void);
-int	 rt_getifa(struct rt_addrinfo *);
-void	 rt_ifannouncemsg(struct ifnet *, int);
-void	 rt_ifmsg(struct ifnet *);
-void	 rt_missmsg(int, struct rt_addrinfo *, int, int);
-void	 rt_newaddrmsg(int, struct ifaddr *, int, struct rtentry *);
-void	 rt_newmaddrmsg(int, struct ifmultiaddr *);
-int	 rt_setgate(struct rtentry *, struct sockaddr *, struct sockaddr *);
-void	 rtalloc(struct route *);
-void	 rtalloc_ign(struct route *, u_long);
-struct rtentry *
-	 rtalloc1(struct sockaddr *, int, u_long);
-void	 rtfree(struct rtentry *);
-int	 rtinit(struct ifaddr *, int, int);
-int	 rtioctl(u_long, caddr_t);
-void	 rtredirect(struct sockaddr *, struct sockaddr *,
-	    struct sockaddr *, int, struct sockaddr *, struct rtentry **);
-int	 rtrequest(int, struct sockaddr *,
-	    struct sockaddr *, struct sockaddr *, int, struct rtentry **);
-int	 rtrequest1(int, struct rt_addrinfo *, struct rtentry **);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/net/slcompress.h b/newlib/libc/sys/linux/include/net/slcompress.h
deleted file mode 100644
index a054246bc..000000000
--- a/newlib/libc/sys/linux/include/net/slcompress.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- * $FreeBSD: src/sys/net/slcompress.h,v 1.17 2002/03/19 21:54:18 alfred Exp $
- */
-
-#ifndef _NET_SLCOMPRESS_H_
-#define _NET_SLCOMPRESS_H_
-
-#define MAX_STATES 16		/* must be > 2 and < 256 */
-#define MAX_HDR 128
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits).  The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet.  The next two octets are the TCP checksum
- * from the original datagram.  The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- *
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowledgement, sequence number and IP ID.  (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.)  Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0.  (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type.  There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows.  Top
- * three bits are actual packet type.  For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C	0x40	/* flag bits for what changed in a packet */
-#define NEW_I	0x20
-#define NEW_S	0x08
-#define NEW_A	0x04
-#define NEW_W	0x02
-#define NEW_U	0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire.  This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
-	struct cstate *cs_next;	/* next most recently used cstate (xmit only) */
-	u_int16_t cs_hlen;	/* size of hdr (receive only) */
-	u_char cs_id;		/* connection # associated with this state */
-	u_char cs_filler;
-	union {
-		char csu_hdr[MAX_HDR];
-		struct ip csu_ip;	/* ip/tcp hdr from most recent packet */
-	} slcs_u;
-};
-#define cs_ip slcs_u.csu_ip
-#define cs_hdr slcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these
- * per line).
- */
-struct slcompress {
-	struct cstate *last_cs;	/* most recently used tstate */
-	u_char last_recv;	/* last rcvd conn. id */
-	u_char last_xmit;	/* last sent conn. id */
-	u_int16_t flags;
-#ifndef SL_NO_STATS
-	int sls_packets;	/* outbound packets */
-	int sls_compressed;	/* outbound compressed packets */
-	int sls_searches;	/* searches for connection state */
-	int sls_misses;		/* times couldn't find conn. state */
-	int sls_uncompressedin;	/* inbound uncompressed packets */
-	int sls_compressedin;	/* inbound compressed packets */
-	int sls_errorin;	/* inbound unknown type packets */
-	int sls_tossed;		/* inbound packets tossed because of error */
-#endif
-	struct cstate tstate[MAX_STATES];	/* xmit connection states */
-	struct cstate rstate[MAX_STATES];	/* receive connection states */
-};
-/* flag values */
-#define SLF_TOSS 1		/* tossing rcvd frames because of input err */
-
-void	 sl_compress_init(struct slcompress *, int);
-u_int	 sl_compress_tcp(struct mbuf *, struct ip *, struct slcompress *, int);
-int	 sl_uncompress_tcp(u_char **, int, u_int, struct slcompress *);
-int	 sl_uncompress_tcp_core(u_char *, int, int, u_int,
-	    struct slcompress *, u_char **, u_int *);
-
-#endif /* !_NET_SLCOMPRESS_H_ */
diff --git a/newlib/libc/sys/linux/include/net/slip.h b/newlib/libc/sys/linux/include/net/slip.h
deleted file mode 100644
index 595b935a1..000000000
--- a/newlib/libc/sys/linux/include/net/slip.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*-
- * Copyright (c) 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)slip.h	8.1 (Berkeley) 2/12/94
- * $FreeBSD: src/sys/net/slip.h,v 1.9 1999/08/28 00:48:29 peter Exp $
- */
-
-#ifndef _NET_SLIP_H_
-#define	_NET_SLIP_H_
-
-/* Ioctls operating on SLIP ttys. */
-#define	SLIOCGUNIT	_IOR('t', 88, int)	/* get slip unit number */
-#define	SLIOCSKEEPAL	_IOW('t', 84, int)	/* set keepalive */
-#define	SLIOCSOUTFILL	_IOW('t', 83, int)	/* set out fill time */
-#define	SLIOCGKEEPAL	_IOR('t', 82, int)	/* get keepalive time */
-#define	SLIOCGOUTFILL	_IOR('t', 81, int)	/* get out fill time */
-#define	SLIOCSUNIT	_IOW('t', 80, int)	/* set slip unit number */
-
-/*
- * Definitions of the pseudo-link-level header attached to slip
- * packets grabbed by the packet filter (bpf) traffic monitor.
- */
-#define	SLIP_HDRLEN	16		/* BPF SLIP header length */
-
-/* Offsets into BPF SLIP header. */
-#define	SLX_DIR		0		/* direction; see below */
-#define	SLX_CHDR	1		/* compressed header data */
-#define	CHDR_LEN	15		/* length of compressed header data */
-
-#define	SLIPDIR_IN	0		/* incoming */
-#define	SLIPDIR_OUT	1		/* outgoing */
-
-#endif /* !_NET_SLIP_H */
diff --git a/newlib/libc/sys/linux/include/net/zlib.h b/newlib/libc/sys/linux/include/net/zlib.h
deleted file mode 100644
index c2d32be1f..000000000
--- a/newlib/libc/sys/linux/include/net/zlib.h
+++ /dev/null
@@ -1,1013 +0,0 @@
-/* $FreeBSD: src/sys/net/zlib.h,v 1.7 1999/12/29 04:38:38 peter Exp $	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 971127==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-
-/* +++ zlib.h */
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.4, Jul 24th, 1996.
-
-  Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* +++ zconf.h */
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-#  define deflateInit_	z_deflateInit_
-#  define deflate	z_deflate
-#  define deflateEnd	z_deflateEnd
-#  define inflateInit_ 	z_inflateInit_
-#  define inflate	z_inflate
-#  define inflateEnd	z_inflateEnd
-#  define deflateInit2_	z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy	z_deflateCopy
-#  define deflateReset	z_deflateReset
-#  define deflateParams	z_deflateParams
-#  define inflateInit2_	z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync	z_inflateSync
-#  define inflateReset	z_inflateReset
-#  define compress	z_compress
-#  define uncompress	z_uncompress
-#  define adler32	z_adler32
-#  define crc32		z_crc32
-#  define get_crc_table z_get_crc_table
-
-#  define Byte		z_Byte
-#  define uInt		z_uInt
-#  define uLong		z_uLong
-#  define Bytef	        z_Bytef
-#  define charf		z_charf
-#  define intf		z_intf
-#  define uIntf		z_uIntf
-#  define uLongf	z_uLongf
-#  define voidpf	z_voidpf
-#  define voidp		z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
-#  endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
-#  endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-#  define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR __far
-#  else
-#    define FAR far
-#  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
-#    define SMALL_MEDIUM
-#    define FAR __far
-#  endif
-#endif
-#ifndef FAR
-#   define FAR
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
-   /* Borland C/C++ ignores FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-#  include <windows.h>
-#  define EXPORT  WINAPI
-#else
-#  define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
-/* --- zconf.h */
-
-#define ZLIB_VERSION "1.0.4P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    const char     *msg; /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_PACKET_FLUSH	2
-#define Z_SYNC_FLUSH    3
-#define Z_FULL_FLUSH    4
-#define Z_FINISH        5
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-                        /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
- */
-
-/* 
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
-  output is byte aligned (the compressor can clear its internal bit buffer)
-  and the current block is always terminated; this can be useful if the
-  compressor has to be restarted from scratch after an interruption (in which
-  case the internal state of the compressor may be lost).
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/* 
-extern int EXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
-   allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
-   with the version assumed by the caller.  msg is set to null if there is no
-   error message. inflateInit does not perform any decompression: this will be
-   done by inflate().
-*/
-
-#if defined(__FreeBSD__) && defined(_KERNEL)
-#define inflate       inflate_ppp     /* FreeBSD already has an inflate :-( */
-#endif
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
-  application may then call inflateSync to look for a good compression block.
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
-  dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*   
-extern int EXPORT deflateInit2 OF((z_streamp strm,
-                                   int  level,
-                                   int  method,
-                                   int  windowBits,
-                                   int  memLevel,
-                                   int  strategy));
-
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
-*/
-                            
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
-                                           const Bytef *dictionary,
-				           uInt  dictLength));
-/*
-     Initializes the compression dictionary (history buffer) from the given
-   byte sequence without producing any compressed output. This function must
-   be called immediately after deflateInit or deflateInit2, before any call
-   of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
-   can be predicted with good accuracy; the data can then be compressed better
-   than with the default empty dictionary. In this version of the library,
-   only the last 32K bytes of the dictionary are used.
-     Upon return of this function, strm->adler is set to the Adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
-   is inconsistent (for example if deflate has already been called for this
-   stream). deflateSetDictionary does not perform any compression: this will
-   be done by deflate(). 
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
-                                  z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
-     Dynamically update the compression level and compression strategy.
-   This can be used to switch between compression and straight copy of
-   the input data, or to switch to a different kind of input data requiring
-   a different strategy. If the compression level is changed, the input
-   available so far is compressed with the old level (and may be flushed);
-   the new level will take effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
-*/
-
-extern int EXPORT deflateOutputPending OF((z_streamp strm));
-/*
-     Returns the number of bytes of output which are immediately
-   available from the compressor (i.e. without any further input
-   or flush).
-*/
-
-/*   
-extern int EXPORT inflateInit2 OF((z_streamp strm,
-                                   int  windowBits));
-
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
-				           const Bytef *dictionary,
-					   uInt  dictLength));
-/*
-     Initializes the decompression dictionary (history buffer) from the given
-   uncompressed byte sequence. This function must be called immediately after
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
-   by the compressor can be determined from the Adler32 value returned by this
-   call of inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
-			       const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-				 const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen  OF((const char *path, const char *mode));
-/*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
-   in this case gzread will directly read from the file without decompression.
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
-/*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
-*/
-
-extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
-
-extern int EXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
-*/
-
-extern int EXPORT    gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
-*/
-
-extern int EXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
-			           const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
-				   const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-				    int windowBits, int memLevel, int strategy,
-				    const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-				    const char *version, int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
-/* --- zlib.h */
diff --git a/newlib/libc/sys/linux/include/netconfig.h b/newlib/libc/sys/linux/include/netconfig.h
deleted file mode 100644
index cead32109..000000000
--- a/newlib/libc/sys/linux/include/netconfig.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*	$NetBSD: netconfig.h,v 1.1 2000/06/02 22:57:54 fvdl Exp $	*/
-/*	$FreeBSD: src/include/netconfig.h,v 1.3 2002/03/23 17:24:53 imp Exp $ */
-
-
-#ifndef _NETCONFIG_H_
-#define _NETCONFIG_H_
-
-#include <sys/cdefs.h>
-
-#define NETCONFIG	"/etc/netconfig"
-#define NETPATH		"NETPATH"
-
-struct netconfig {
-	char *nc_netid;			/* Network ID */
-	unsigned long nc_semantics;	/* Semantics (see below) */
-	unsigned long nc_flag;		/* Flags (see below) */
-	char *nc_protofmly;		/* Protocol family */
-	char *nc_proto;			/* Protocol name */
-	char *nc_device;		/* Network device pathname */
-	unsigned long nc_nlookups;	/* Number of directory lookup libs */
-	char **nc_lookups;		/* Names of the libraries */
-	unsigned long nc_unused[9];	/* reserved */
-};
-
-typedef struct {
-	struct netconfig **nc_head;
-	struct netconfig **nc_curr;
-} NCONF_HANDLE;
-
-/*
- * nc_semantics values
- */
-#define NC_TPI_CLTS	1
-#define NC_TPI_COTS	2
-#define NC_TPI_COTS_ORD	3
-#define NC_TPI_RAW	4
-
-/*
- * nc_flag values
- */
-#define NC_NOFLAG	0x00
-#define NC_VISIBLE	0x01
-#define NC_BROADCAST	0x02
-
-/*
- * nc_protofmly values
- */
-#define NC_NOPROTOFMLY	"-"
-#define NC_LOOPBACK	"loopback"
-#define NC_INET		"inet"
-#define NC_INET6	"inet6"
-#define NC_IMPLINK	"implink"
-#define NC_PUP		"pup"
-#define NC_CHAOS	"chaos"
-#define NC_NS		"ns"
-#define NC_NBS		"nbs"
-#define NC_ECMA		"ecma"
-#define NC_DATAKIT	"datakit"
-#define NC_CCITT	"ccitt"
-#define NC_SNA		"sna"
-#define NC_DECNET	"decnet"
-#define NC_DLI		"dli"
-#define NC_LAT		"lat"
-#define NC_HYLINK	"hylink"
-#define NC_APPLETALK	"appletalk"
-#define NC_NIT		"nit"
-#define NC_IEEE802	"ieee802"
-#define NC_OSI		"osi"
-#define NC_X25		"x25"
-#define NC_OSINET	"osinet"
-#define NC_GOSIP	"gosip"
-
-/*
- * nc_proto values
- */
-#define NC_NOPROTO	"-"
-#define NC_TCP		"tcp"
-#define NC_UDP		"udp"
-#define NC_ICMP		"icmp"
-
-__BEGIN_DECLS
-void *setnetconfig(void);
-struct netconfig *getnetconfig(void *);
-struct netconfig *getnetconfigent(const char *);
-void freenetconfigent(struct netconfig *);
-int endnetconfig(void *);
-
-void *setnetpath(void);
-struct netconfig *getnetpath(void *);
-int endnetpath(void *);
-
-void nc_perror(const char *);
-char *nc_sperror(void);
-__END_DECLS
-
-#endif /* _NETCONFIG_H_ */
diff --git a/newlib/libc/sys/linux/include/netdb.h b/newlib/libc/sys/linux/include/netdb.h
deleted file mode 100644
index e92b269e2..000000000
--- a/newlib/libc/sys/linux/include/netdb.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*-
- * Copyright (c) 1980, 1983, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-/*
- *      @(#)netdb.h	8.1 (Berkeley) 6/2/93
- *      From: Id: netdb.h,v 8.9 1996/11/19 08:39:29 vixie Exp $
- * $FreeBSD: src/include/netdb.h,v 1.23 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef _NETDB_H_
-#define _NETDB_H_
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/ansi.h>
-#include <stdio.h>
-
-#ifndef __socklen_t_defined
-typedef unsigned int socklen_t;
-#define __socklen_t_defined 1
-#endif
-
-#ifdef	_BSD_SOCKLEN_T_
-typedef	_BSD_SOCKLEN_T_	socklen_t;
-#undef	_BSD_SOCKLEN_T_
-#endif
-
-#ifndef _PATH_HEQUIV
-# define	_PATH_HEQUIV	"/etc/hosts.equiv"
-#endif
-#define	_PATH_HOSTS	"/etc/hosts"
-#define	_PATH_NETWORKS	"/etc/networks"
-#define	_PATH_PROTOCOLS	"/etc/protocols"
-#define	_PATH_SERVICES	"/etc/services"
-
-extern int h_errno;
-
-#define	MAXALIASES	35
-  /* For now, only support one return address. */
-#define MAXADDRS         2
-/*
- * Structures returned by network data base library.  All addresses are
- * supplied in host order, and returned in network order (suitable for
- * use in system calls).
- */
-struct hostent {
-  char	*h_name;	/* official name of host */
-  char	**h_aliases;	/* alias list */
-  int	h_addrtype;	/* host address type */
-  int	h_length;	/* length of address */
-  char	**h_addr_list;	/* list of addresses from name server */
-  char *h_addr;         /* address, for backward compatibility */
-  /* private data, for re-entrancy */
-  char *__host_addrs[MAXADDRS];
-  char *__host_aliases[MAXALIASES];
-  unsigned int __host_addr[4];
-};
-
-/*
- * Assumption here is that a network number
- * fits in an unsigned long -- probably a poor one.
- */
-struct netent {
-	char		*n_name;	/* official name of net */
-	char		**n_aliases;	/* alias list */
-	int		n_addrtype;	/* net address type */
-	unsigned long	n_net;		/* network # */
-};
-
-struct servent {
-	char	*s_name;	/* official service name */
-	char	**s_aliases;	/* alias list */
-	int	s_port;		/* port # */
-	char	*s_proto;	/* protocol to use */
-};
-
-struct protoent {
-	char	*p_name;	/* official protocol name */
-	char	**p_aliases;	/* alias list */
-	int	p_proto;	/* protocol # */
-};
-
-struct addrinfo {
-	int	ai_flags;	/* AI_PASSIVE, AI_CANONNAME, AI_NUMERICHOST */
-	int	ai_family;	/* PF_xxx */
-	int	ai_socktype;	/* SOCK_xxx */
-	int	ai_protocol;	/* 0 or IPPROTO_xxx for IPv4 and IPv6 */
-	size_t	ai_addrlen;	/* length of ai_addr */
-	char	*ai_canonname;	/* canonical name for hostname */
-	struct	sockaddr *ai_addr;	/* binary address */
-	struct	addrinfo *ai_next;	/* next structure in linked list */
-};
-
-/*
- * Error return codes from gethostbyname() and gethostbyaddr()
- * (left in extern int h_errno).
- */
-
-#define	NETDB_INTERNAL	-1	/* see errno */
-#define	NETDB_SUCCESS	0	/* no problem */
-#define	HOST_NOT_FOUND	1 /* Authoritative Answer Host not found */
-#define	TRY_AGAIN	2 /* Non-Authoritative Host not found, or SERVERFAIL */
-#define	NO_RECOVERY	3 /* Non recoverable errors, FORMERR, REFUSED, NOTIMP */
-#define	NO_DATA		4 /* Valid name, no data record of requested type */
-#define	NO_ADDRESS	NO_DATA		/* no address, look for MX record */
-
-/*
- * Error return codes from getaddrinfo()
- */
-#define	EAI_ADDRFAMILY	 1	/* address family for hostname not supported */
-#define	EAI_AGAIN	 2	/* temporary failure in name resolution */
-#define	EAI_BADFLAGS	 3	/* invalid value for ai_flags */
-#define	EAI_FAIL	 4	/* non-recoverable failure in name resolution */
-#define	EAI_FAMILY	 5	/* ai_family not supported */
-#define	EAI_MEMORY	 6	/* memory allocation failure */
-#define	EAI_NODATA	 7	/* no address associated with hostname */
-#define	EAI_NONAME	 8	/* hostname nor servname provided, or not known */
-#define	EAI_SERVICE	 9	/* servname not supported for ai_socktype */
-#define	EAI_SOCKTYPE	10	/* ai_socktype not supported */
-#define	EAI_SYSTEM	11	/* system error returned in errno */
-#define	EAI_BADHINTS	12
-#define	EAI_PROTOCOL	13
-#define	EAI_MAX		14
-
-/*
- * Flag values for getaddrinfo()
- */
-#define	AI_PASSIVE	0x00000001 /* get address to use bind() */
-#define	AI_CANONNAME	0x00000002 /* fill ai_canonname */
-#define	AI_NUMERICHOST	0x00000004 /* prevent name resolution */
-/* valid flags for addrinfo */
-#define AI_MASK \
-    (AI_PASSIVE | AI_CANONNAME | AI_NUMERICHOST | AI_ADDRCONFIG)
-
-#define	AI_ALL		0x00000100 /* IPv6 and IPv4-mapped (with AI_V4MAPPED) */
-#define	AI_V4MAPPED_CFG	0x00000200 /* accept IPv4-mapped if kernel supports */
-#define	AI_ADDRCONFIG	0x00000400 /* only if any address is assigned */
-#define	AI_V4MAPPED	0x00000800 /* accept IPv4-mapped IPv6 address */
-/* special recommended flags for getipnodebyname */
-#define	AI_DEFAULT	(AI_V4MAPPED_CFG | AI_ADDRCONFIG)
-
-/*
- * Constants for getnameinfo()
- */
-#define	NI_MAXHOST	1025
-#define	NI_MAXSERV	32
-
-/*
- * Flag values for getnameinfo()
- */
-#define	NI_NOFQDN	0x00000001
-#define	NI_NUMERICHOST	0x00000002
-#define	NI_NAMEREQD	0x00000004
-#define	NI_NUMERICSERV	0x00000008
-#define	NI_DGRAM	0x00000010
-#define NI_WITHSCOPEID	0x00000020
-
-/*
- * Scope delimit character
- */
-#define	SCOPE_DELIMITER	'%'
-
-__BEGIN_DECLS
-void		endhostent(void);
-void		endhostent_r(FILE **, int *);
-void		endnetent(void);
-void		endnetgrent(void);
-void		endprotoent(void);
-void		endservent(void);
-void		freehostent(struct hostent *);
-struct hostent	*gethostbyaddr(const char *, int, int);
-struct hostent	*gethostbyname(const char *);
-struct hostent	*gethostbyname2(const char *, int);
-struct hostent	*gethostent(void);
-int             gethostent_r(struct hostent *, char *, int, int *, FILE **);
-struct hostent	*getipnodebyaddr(const void *, size_t, int, int *);
-struct hostent	*getipnodebyname(const char *, int, int, int *);
-struct netent	*getnetbyaddr(unsigned long, int);
-struct netent	*getnetbyname(const char *);
-struct netent	*getnetent(void);
-int		getnetgrent(char **, char **, char **);
-struct protoent	*getprotobyname(const char *);
-struct protoent	*getprotobynumber(int);
-struct protoent	*getprotoent(void);
-struct servent	*getservbyname(const char *, const char *);
-struct servent	*getservbyport(int, const char *);
-struct servent	*getservent(void);
-void		herror(const char *);
-__const char	*hstrerror(int);
-int		innetgr(const char *, const char *, const char *, const char *);
-void		sethostent(int);
-void		sethostent_r(int, FILE **, int *);
-/* void		sethostfile(const char *); */
-void		setnetent(int);
-void		setprotoent(int);
-int		getaddrinfo(const char *, const char *,
-			    const struct addrinfo *, struct addrinfo **);
-int		getnameinfo(const struct sockaddr *, socklen_t, char *,
-			    size_t, char *, size_t, int);
-void		freeaddrinfo(struct addrinfo *);
-char		*gai_strerror(int);
-void		setnetgrent(const char *);
-void		setservent(int);
-
-/*
- * PRIVATE functions specific to the FreeBSD implementation
- */
-
-/* DO NOT USE THESE, THEY ARE SUBJECT TO CHANGE AND ARE NOT PORTABLE!!! */
-void	_sethosthtent(int);
-void	_sethosthtent_r(int, FILE **, int *);
-void	_endhosthtent(void);
-void	_endhosthtent_r(FILE **, int *);
-void	_sethostdnsent(int);
-void	_endhostdnsent(void);
-void	_setnethtent(int);
-void	_endnethtent(void);
-void	_setnetdnsent(int);
-void	_endnetdnsent(void);
-struct hostent * _gethostbynisname(const char *, int);
-struct hostent * _gethostbynisaddr(const char *, int, int);
-void _map_v4v6_address(const char *, char *);
-void _map_v4v6_hostent(struct hostent *, char **, int *);
-__END_DECLS
-
-#endif /* !_NETDB_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/icmp6.h b/newlib/libc/sys/linux/include/netinet/icmp6.h
deleted file mode 100644
index 915efda64..000000000
--- a/newlib/libc/sys/linux/include/netinet/icmp6.h
+++ /dev/null
@@ -1,740 +0,0 @@
-/*	$FreeBSD: src/sys/netinet/icmp6.h,v 1.8 2002/05/06 16:28:25 ume Exp $	*/
-/*	$KAME: icmp6.h,v 1.46 2001/04/27 15:09:48 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip_icmp.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET_ICMP6_H_
-#define _NETINET_ICMP6_H_
-
-#define ICMPV6_PLD_MAXLEN	1232	/* IPV6_MMTU - sizeof(struct ip6_hdr)
-					   - sizeof(struct icmp6_hdr) */
-
-struct icmp6_hdr {
-	u_int8_t	icmp6_type;	/* type field */
-	u_int8_t	icmp6_code;	/* code field */
-	u_int16_t	icmp6_cksum;	/* checksum field */
-	union {
-		u_int32_t	icmp6_un_data32[1]; /* type-specific field */
-		u_int16_t	icmp6_un_data16[2]; /* type-specific field */
-		u_int8_t	icmp6_un_data8[4];  /* type-specific field */
-	} icmp6_dataun;
-} __attribute__((__packed__));
-
-#define icmp6_data32	icmp6_dataun.icmp6_un_data32
-#define icmp6_data16	icmp6_dataun.icmp6_un_data16
-#define icmp6_data8	icmp6_dataun.icmp6_un_data8
-#define icmp6_pptr	icmp6_data32[0]		/* parameter prob */
-#define icmp6_mtu	icmp6_data32[0]		/* packet too big */
-#define icmp6_id	icmp6_data16[0]		/* echo request/reply */
-#define icmp6_seq	icmp6_data16[1]		/* echo request/reply */
-#define icmp6_maxdelay	icmp6_data16[0]		/* mcast group membership */
-
-#define ICMP6_DST_UNREACH		1	/* dest unreachable, codes: */
-#define ICMP6_PACKET_TOO_BIG		2	/* packet too big */
-#define ICMP6_TIME_EXCEEDED		3	/* time exceeded, code: */
-#define ICMP6_PARAM_PROB		4	/* ip6 header bad */
-
-#define ICMP6_ECHO_REQUEST		128	/* echo service */
-#define ICMP6_ECHO_REPLY		129	/* echo reply */
-#define ICMP6_MEMBERSHIP_QUERY		130	/* group membership query */
-#define MLD_LISTENER_QUERY		130 	/* multicast listener query */
-#define ICMP6_MEMBERSHIP_REPORT		131	/* group membership report */
-#define MLD_LISTENER_REPORT		131	/* multicast listener report */
-#define ICMP6_MEMBERSHIP_REDUCTION	132	/* group membership termination */
-#define MLD_LISTENER_DONE		132	/* multicast listener done */
-
-#ifndef _KERNEL
-/* the followings are for backward compatibility to old KAME apps. */
-#define MLD6_LISTENER_QUERY	MLD_LISTENER_QUERY
-#define MLD6_LISTENER_REPORT	MLD_LISTENER_REPORT
-#define MLD6_LISTENER_DONE	MLD_LISTENER_DONE
-#endif
-
-#define ND_ROUTER_SOLICIT		133	/* router solicitation */
-#define ND_ROUTER_ADVERT		134	/* router advertisment */
-#define ND_NEIGHBOR_SOLICIT		135	/* neighbor solicitation */
-#define ND_NEIGHBOR_ADVERT		136	/* neighbor advertisment */
-#define ND_REDIRECT			137	/* redirect */
-
-#define ICMP6_ROUTER_RENUMBERING	138	/* router renumbering */
-
-#define ICMP6_WRUREQUEST		139	/* who are you request */
-#define ICMP6_WRUREPLY			140	/* who are you reply */
-#define ICMP6_FQDN_QUERY		139	/* FQDN query */
-#define ICMP6_FQDN_REPLY		140	/* FQDN reply */
-#define ICMP6_NI_QUERY			139	/* node information request */
-#define ICMP6_NI_REPLY			140	/* node information reply */
-
-/* The definitions below are experimental. TBA */
-#define MLD_MTRACE_RESP			200	/* mtrace resp (to sender) */
-#define MLD_MTRACE			201	/* mtrace messages */
-
-#define ICMP6_HADISCOV_REQUEST		202	/* XXX To be defined */
-#define ICMP6_HADISCOV_REPLY		203	/* XXX To be defined */
-  
-#ifndef _KERNEL
-#define MLD6_MTRACE_RESP	MLD_MTRACE_RESP
-#define MLD6_MTRACE		MLD_MTRACE
-#endif
-
-#define ICMP6_MAXTYPE			203
-
-#define ICMP6_DST_UNREACH_NOROUTE	0	/* no route to destination */
-#define ICMP6_DST_UNREACH_ADMIN	 	1	/* administratively prohibited */
-#define ICMP6_DST_UNREACH_NOTNEIGHBOR	2	/* not a neighbor(obsolete) */
-#define ICMP6_DST_UNREACH_BEYONDSCOPE	2	/* beyond scope of source address */
-#define ICMP6_DST_UNREACH_ADDR		3	/* address unreachable */
-#define ICMP6_DST_UNREACH_NOPORT	4	/* port unreachable */
-
-#define ICMP6_TIME_EXCEED_TRANSIT 	0	/* ttl==0 in transit */
-#define ICMP6_TIME_EXCEED_REASSEMBLY	1	/* ttl==0 in reass */
-
-#define ICMP6_PARAMPROB_HEADER 	 	0	/* erroneous header field */
-#define ICMP6_PARAMPROB_NEXTHEADER	1	/* unrecognized next header */
-#define ICMP6_PARAMPROB_OPTION		2	/* unrecognized option */
-
-#define ICMP6_INFOMSG_MASK		0x80	/* all informational messages */
-
-#define ICMP6_NI_SUBJ_IPV6	0	/* Query Subject is an IPv6 address */
-#define ICMP6_NI_SUBJ_FQDN	1	/* Query Subject is a Domain name */
-#define ICMP6_NI_SUBJ_IPV4	2	/* Query Subject is an IPv4 address */
-
-#define ICMP6_NI_SUCCESS	0	/* node information successful reply */
-#define ICMP6_NI_REFUSED	1	/* node information request is refused */
-#define ICMP6_NI_UNKNOWN	2	/* unknown Qtype */
-
-#define ICMP6_ROUTER_RENUMBERING_COMMAND  0	/* rr command */
-#define ICMP6_ROUTER_RENUMBERING_RESULT   1	/* rr result */
-#define ICMP6_ROUTER_RENUMBERING_SEQNUM_RESET   255	/* rr seq num reset */
-
-/* Used in kernel only */
-#define ND_REDIRECT_ONLINK	0	/* redirect to an on-link node */
-#define ND_REDIRECT_ROUTER	1	/* redirect to a better router */
-
-/*
- * Multicast Listener Discovery
- */
-struct mld_hdr {
-	struct icmp6_hdr	mld_icmp6_hdr;
-	struct in6_addr		mld_addr; /* multicast address */
-} __attribute__((__packed__));
-
-/* definitions to provide backward compatibility to old KAME applications */
-#ifndef _KERNEL
-#define mld6_hdr	mld_hdr
-#define mld6_type	mld_type
-#define mld6_code	mld_code
-#define mld6_cksum	mld_cksum
-#define mld6_maxdelay	mld_maxdelay
-#define mld6_reserved	mld_reserved
-#define mld6_addr	mld_addr
-#endif
-
-/* shortcut macro definitions */
-#define mld_type	mld_icmp6_hdr.icmp6_type
-#define mld_code	mld_icmp6_hdr.icmp6_code
-#define mld_cksum	mld_icmp6_hdr.icmp6_cksum
-#define mld_maxdelay	mld_icmp6_hdr.icmp6_data16[0]
-#define mld_reserved	mld_icmp6_hdr.icmp6_data16[1]
-
-/*
- * Neighbor Discovery
- */
-
-struct nd_router_solicit {	/* router solicitation */
-	struct icmp6_hdr 	nd_rs_hdr;
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-#define nd_rs_type	nd_rs_hdr.icmp6_type
-#define nd_rs_code	nd_rs_hdr.icmp6_code
-#define nd_rs_cksum	nd_rs_hdr.icmp6_cksum
-#define nd_rs_reserved	nd_rs_hdr.icmp6_data32[0]
-
-struct nd_router_advert {	/* router advertisement */
-	struct icmp6_hdr	nd_ra_hdr;
-	u_int32_t		nd_ra_reachable;	/* reachable time */
-	u_int32_t		nd_ra_retransmit;	/* retransmit timer */
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-#define nd_ra_type		nd_ra_hdr.icmp6_type
-#define nd_ra_code		nd_ra_hdr.icmp6_code
-#define nd_ra_cksum		nd_ra_hdr.icmp6_cksum
-#define nd_ra_curhoplimit	nd_ra_hdr.icmp6_data8[0]
-#define nd_ra_flags_reserved	nd_ra_hdr.icmp6_data8[1]
-#define ND_RA_FLAG_MANAGED	0x80
-#define ND_RA_FLAG_OTHER	0x40
-#define ND_RA_FLAG_HA		0x20
-
-/*
- * Router preference values based on draft-draves-ipngwg-router-selection-01.
- * These are non-standard definitions.
- */
-#define ND_RA_FLAG_RTPREF_MASK	0x18 /* 00011000 */
-
-#define ND_RA_FLAG_RTPREF_HIGH	0x08 /* 00001000 */
-#define ND_RA_FLAG_RTPREF_MEDIUM	0x00 /* 00000000 */
-#define ND_RA_FLAG_RTPREF_LOW	0x18 /* 00011000 */
-#define ND_RA_FLAG_RTPREF_RSV	0x10 /* 00010000 */
-
-#define nd_ra_router_lifetime	nd_ra_hdr.icmp6_data16[1]
-
-struct nd_neighbor_solicit {	/* neighbor solicitation */
-	struct icmp6_hdr	nd_ns_hdr;
-	struct in6_addr		nd_ns_target;	/*target address */
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-#define nd_ns_type		nd_ns_hdr.icmp6_type
-#define nd_ns_code		nd_ns_hdr.icmp6_code
-#define nd_ns_cksum		nd_ns_hdr.icmp6_cksum
-#define nd_ns_reserved		nd_ns_hdr.icmp6_data32[0]
-
-struct nd_neighbor_advert {	/* neighbor advertisement */
-	struct icmp6_hdr	nd_na_hdr;
-	struct in6_addr		nd_na_target;	/* target address */
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-#define nd_na_type		nd_na_hdr.icmp6_type
-#define nd_na_code		nd_na_hdr.icmp6_code
-#define nd_na_cksum		nd_na_hdr.icmp6_cksum
-#define nd_na_flags_reserved	nd_na_hdr.icmp6_data32[0]
-#if BYTE_ORDER == BIG_ENDIAN
-#define ND_NA_FLAG_ROUTER		0x80000000
-#define ND_NA_FLAG_SOLICITED		0x40000000
-#define ND_NA_FLAG_OVERRIDE		0x20000000
-#else
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define ND_NA_FLAG_ROUTER		0x80
-#define ND_NA_FLAG_SOLICITED		0x40
-#define ND_NA_FLAG_OVERRIDE		0x20
-#endif
-#endif
-
-struct nd_redirect {		/* redirect */
-	struct icmp6_hdr	nd_rd_hdr;
-	struct in6_addr		nd_rd_target;	/* target address */
-	struct in6_addr		nd_rd_dst;	/* destination address */
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-#define nd_rd_type		nd_rd_hdr.icmp6_type
-#define nd_rd_code		nd_rd_hdr.icmp6_code
-#define nd_rd_cksum		nd_rd_hdr.icmp6_cksum
-#define nd_rd_reserved		nd_rd_hdr.icmp6_data32[0]
-
-struct nd_opt_hdr {		/* Neighbor discovery option header */
-	u_int8_t	nd_opt_type;
-	u_int8_t	nd_opt_len;
-	/* followed by option specific data*/
-} __attribute__((__packed__));
-
-#define ND_OPT_SOURCE_LINKADDR		1
-#define ND_OPT_TARGET_LINKADDR		2
-#define ND_OPT_PREFIX_INFORMATION	3
-#define ND_OPT_REDIRECTED_HEADER	4
-#define ND_OPT_MTU			5
-
-#define ND_OPT_ROUTE_INFO		200	/* draft-ietf-ipngwg-router-preference, not officially assigned yet */
-
-struct nd_opt_prefix_info {	/* prefix information */
-	u_int8_t	nd_opt_pi_type;
-	u_int8_t	nd_opt_pi_len;
-	u_int8_t	nd_opt_pi_prefix_len;
-	u_int8_t	nd_opt_pi_flags_reserved;
-	u_int32_t	nd_opt_pi_valid_time;
-	u_int32_t	nd_opt_pi_preferred_time;
-	u_int32_t	nd_opt_pi_reserved2;
-	struct in6_addr	nd_opt_pi_prefix;
-} __attribute__((__packed__));
-
-#define ND_OPT_PI_FLAG_ONLINK		0x80
-#define ND_OPT_PI_FLAG_AUTO		0x40
-
-struct nd_opt_rd_hdr {		/* redirected header */
-	u_int8_t	nd_opt_rh_type;
-	u_int8_t	nd_opt_rh_len;
-	u_int16_t	nd_opt_rh_reserved1;
-	u_int32_t	nd_opt_rh_reserved2;
-	/* followed by IP header and data */
-} __attribute__((__packed__));
-
-struct nd_opt_mtu {		/* MTU option */
-	u_int8_t	nd_opt_mtu_type;
-	u_int8_t	nd_opt_mtu_len;
-	u_int16_t	nd_opt_mtu_reserved;
-	u_int32_t	nd_opt_mtu_mtu;
-} __attribute__((__packed__));
-
-struct nd_opt_route_info {	/* route info */
-	u_int8_t	nd_opt_rti_type;
-	u_int8_t	nd_opt_rti_len;
-	u_int8_t	nd_opt_rti_prefixlen;
-	u_int8_t	nd_opt_rti_flags;
-	u_int32_t	nd_opt_rti_lifetime;
-	/* prefix follows */
-} __attribute__((__packed__));
-
-/*
- * icmp6 namelookup
- */
-
-struct icmp6_namelookup {
-	struct icmp6_hdr 	icmp6_nl_hdr;
-	u_int8_t	icmp6_nl_nonce[8];
-	int32_t		icmp6_nl_ttl;
-#if 0
-	u_int8_t	icmp6_nl_len;
-	u_int8_t	icmp6_nl_name[3];
-#endif
-	/* could be followed by options */
-} __attribute__((__packed__));
-
-/*
- * icmp6 node information
- */
-struct icmp6_nodeinfo {
-	struct icmp6_hdr icmp6_ni_hdr;
-	u_int8_t icmp6_ni_nonce[8];
-	/* could be followed by reply data */
-} __attribute__((__packed__));
-
-#define ni_type		icmp6_ni_hdr.icmp6_type
-#define ni_code		icmp6_ni_hdr.icmp6_code
-#define ni_cksum	icmp6_ni_hdr.icmp6_cksum
-#define ni_qtype	icmp6_ni_hdr.icmp6_data16[0]
-#define ni_flags	icmp6_ni_hdr.icmp6_data16[1]
-
-#define NI_QTYPE_NOOP		0 /* NOOP  */
-#define NI_QTYPE_SUPTYPES	1 /* Supported Qtypes */
-#define NI_QTYPE_FQDN		2 /* FQDN (draft 04) */
-#define NI_QTYPE_DNSNAME	2 /* DNS Name */
-#define NI_QTYPE_NODEADDR	3 /* Node Addresses */
-#define NI_QTYPE_IPV4ADDR	4 /* IPv4 Addresses */
-
-#if BYTE_ORDER == BIG_ENDIAN
-#define NI_SUPTYPE_FLAG_COMPRESS	0x1
-#define NI_FQDN_FLAG_VALIDTTL		0x1
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define NI_SUPTYPE_FLAG_COMPRESS	0x0100
-#define NI_FQDN_FLAG_VALIDTTL		0x0100
-#endif
-
-#ifdef NAME_LOOKUPS_04
-#if BYTE_ORDER == BIG_ENDIAN
-#define NI_NODEADDR_FLAG_LINKLOCAL	0x1
-#define NI_NODEADDR_FLAG_SITELOCAL	0x2
-#define NI_NODEADDR_FLAG_GLOBAL		0x4
-#define NI_NODEADDR_FLAG_ALL		0x8
-#define NI_NODEADDR_FLAG_TRUNCATE	0x10
-#define NI_NODEADDR_FLAG_ANYCAST	0x20 /* just experimental. not in spec */
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define NI_NODEADDR_FLAG_LINKLOCAL	0x0100
-#define NI_NODEADDR_FLAG_SITELOCAL	0x0200
-#define NI_NODEADDR_FLAG_GLOBAL		0x0400
-#define NI_NODEADDR_FLAG_ALL		0x0800
-#define NI_NODEADDR_FLAG_TRUNCATE	0x1000
-#define NI_NODEADDR_FLAG_ANYCAST	0x2000 /* just experimental. not in spec */
-#endif
-#else  /* draft-ietf-ipngwg-icmp-name-lookups-05 (and later?) */
-#if BYTE_ORDER == BIG_ENDIAN
-#define NI_NODEADDR_FLAG_TRUNCATE	0x1
-#define NI_NODEADDR_FLAG_ALL		0x2
-#define NI_NODEADDR_FLAG_COMPAT		0x4
-#define NI_NODEADDR_FLAG_LINKLOCAL	0x8
-#define NI_NODEADDR_FLAG_SITELOCAL	0x10
-#define NI_NODEADDR_FLAG_GLOBAL		0x20
-#define NI_NODEADDR_FLAG_ANYCAST	0x40 /* just experimental. not in spec */
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define NI_NODEADDR_FLAG_TRUNCATE	0x0100
-#define NI_NODEADDR_FLAG_ALL		0x0200
-#define NI_NODEADDR_FLAG_COMPAT		0x0400
-#define NI_NODEADDR_FLAG_LINKLOCAL	0x0800
-#define NI_NODEADDR_FLAG_SITELOCAL	0x1000
-#define NI_NODEADDR_FLAG_GLOBAL		0x2000
-#define NI_NODEADDR_FLAG_ANYCAST	0x4000 /* just experimental. not in spec */
-#endif
-#endif
-
-struct ni_reply_fqdn {
-	u_int32_t ni_fqdn_ttl;	/* TTL */
-	u_int8_t ni_fqdn_namelen; /* length in octets of the FQDN */
-	u_int8_t ni_fqdn_name[3]; /* XXX: alignment */
-} __attribute__((__packed__));
-
-/*
- * Router Renumbering. as router-renum-08.txt
- */
-struct icmp6_router_renum {	/* router renumbering header */
-	struct icmp6_hdr	rr_hdr;
-	u_int8_t	rr_segnum;
-	u_int8_t	rr_flags;
-	u_int16_t	rr_maxdelay;
-	u_int32_t	rr_reserved;
-} __attribute__((__packed__));
-
-#define ICMP6_RR_FLAGS_TEST		0x80
-#define ICMP6_RR_FLAGS_REQRESULT	0x40
-#define ICMP6_RR_FLAGS_FORCEAPPLY	0x20
-#define ICMP6_RR_FLAGS_SPECSITE		0x10
-#define ICMP6_RR_FLAGS_PREVDONE		0x08
-
-#define rr_type		rr_hdr.icmp6_type
-#define rr_code		rr_hdr.icmp6_code
-#define rr_cksum	rr_hdr.icmp6_cksum
-#define rr_seqnum 	rr_hdr.icmp6_data32[0]
-
-struct rr_pco_match {		/* match prefix part */
-	u_int8_t	rpm_code;
-	u_int8_t	rpm_len;
-	u_int8_t	rpm_ordinal;
-	u_int8_t	rpm_matchlen;
-	u_int8_t	rpm_minlen;
-	u_int8_t	rpm_maxlen;
-	u_int16_t	rpm_reserved;
-	struct	in6_addr	rpm_prefix;
-} __attribute__((__packed__));
-
-#define RPM_PCO_ADD		1
-#define RPM_PCO_CHANGE		2
-#define RPM_PCO_SETGLOBAL	3
-#define RPM_PCO_MAX		4
-
-struct rr_pco_use {		/* use prefix part */
-	u_int8_t	rpu_uselen;
-	u_int8_t	rpu_keeplen;
-	u_int8_t	rpu_ramask;
-	u_int8_t	rpu_raflags;
-	u_int32_t	rpu_vltime;
-	u_int32_t	rpu_pltime;
-	u_int32_t	rpu_flags;
-	struct	in6_addr rpu_prefix;
-} __attribute__((__packed__));
-#define ICMP6_RR_PCOUSE_RAFLAGS_ONLINK	0x80
-#define ICMP6_RR_PCOUSE_RAFLAGS_AUTO	0x40
-
-#if BYTE_ORDER == BIG_ENDIAN
-#define ICMP6_RR_PCOUSE_FLAGS_DECRVLTIME     0x80000000
-#define ICMP6_RR_PCOUSE_FLAGS_DECRPLTIME     0x40000000
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define ICMP6_RR_PCOUSE_FLAGS_DECRVLTIME     0x80
-#define ICMP6_RR_PCOUSE_FLAGS_DECRPLTIME     0x40
-#endif
-
-struct rr_result {		/* router renumbering result message */
-	u_int16_t	rrr_flags;
-	u_int8_t	rrr_ordinal;
-	u_int8_t	rrr_matchedlen;
-	u_int32_t	rrr_ifid;
-	struct	in6_addr rrr_prefix;
-} __attribute__((__packed__));
-#if BYTE_ORDER == BIG_ENDIAN
-#define ICMP6_RR_RESULT_FLAGS_OOB		0x0002
-#define ICMP6_RR_RESULT_FLAGS_FORBIDDEN		0x0001
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define ICMP6_RR_RESULT_FLAGS_OOB		0x0200
-#define ICMP6_RR_RESULT_FLAGS_FORBIDDEN		0x0100
-#endif
-
-/*
- * icmp6 filter structures.
- */
-
-struct icmp6_filter {
-	u_int32_t icmp6_filt[8];
-};
-
-#ifdef _KERNEL
-#define	ICMP6_FILTER_SETPASSALL(filterp) \
-do {								\
-	int i; u_char *p;					\
-	p = (u_char *)filterp;					\
-	for (i = 0; i < sizeof(struct icmp6_filter); i++)	\
-		p[i] = 0xff;					\
-} while (0)
-#define	ICMP6_FILTER_SETBLOCKALL(filterp) \
-	bzero(filterp, sizeof(struct icmp6_filter))
-#else /* _KERNEL */
-#define	ICMP6_FILTER_SETPASSALL(filterp) \
-	memset(filterp, 0xff, sizeof(struct icmp6_filter))
-#define	ICMP6_FILTER_SETBLOCKALL(filterp) \
-	memset(filterp, 0x00, sizeof(struct icmp6_filter))
-#endif /* _KERNEL */
-
-#define	ICMP6_FILTER_SETPASS(type, filterp) \
-	(((filterp)->icmp6_filt[(type) >> 5]) |= (1 << ((type) & 31)))
-#define	ICMP6_FILTER_SETBLOCK(type, filterp) \
-	(((filterp)->icmp6_filt[(type) >> 5]) &= ~(1 << ((type) & 31)))
-#define	ICMP6_FILTER_WILLPASS(type, filterp) \
-	((((filterp)->icmp6_filt[(type) >> 5]) & (1 << ((type) & 31))) != 0)
-#define	ICMP6_FILTER_WILLBLOCK(type, filterp) \
-	((((filterp)->icmp6_filt[(type) >> 5]) & (1 << ((type) & 31))) == 0)
-
-/*
- * Variables related to this implementation
- * of the internet control message protocol version 6.
- */
-struct icmp6errstat {
-	u_quad_t icp6errs_dst_unreach_noroute;
-	u_quad_t icp6errs_dst_unreach_admin;
-	u_quad_t icp6errs_dst_unreach_beyondscope;
-	u_quad_t icp6errs_dst_unreach_addr;
-	u_quad_t icp6errs_dst_unreach_noport;
-	u_quad_t icp6errs_packet_too_big;
-	u_quad_t icp6errs_time_exceed_transit;
-	u_quad_t icp6errs_time_exceed_reassembly;
-	u_quad_t icp6errs_paramprob_header;
-	u_quad_t icp6errs_paramprob_nextheader;
-	u_quad_t icp6errs_paramprob_option;
-	u_quad_t icp6errs_redirect; /* we regard redirect as an error here */
-	u_quad_t icp6errs_unknown;
-};
-
-struct icmp6stat {
-/* statistics related to icmp6 packets generated */
-	u_quad_t icp6s_error;		/* # of calls to icmp6_error */
-	u_quad_t icp6s_canterror;	/* no error 'cuz old was icmp */
-	u_quad_t icp6s_toofreq;		/* no error 'cuz rate limitation */
-	u_quad_t icp6s_outhist[256];
-/* statistics related to input message processed */
-	u_quad_t icp6s_badcode;		/* icmp6_code out of range */
-	u_quad_t icp6s_tooshort;	/* packet < sizeof(struct icmp6_hdr) */
-	u_quad_t icp6s_checksum;	/* bad checksum */
-	u_quad_t icp6s_badlen;		/* calculated bound mismatch */
-	/*
-	 * number of responses: this member is inherited from netinet code, but
-	 * for netinet6 code, it is already available in icp6s_outhist[].
-	 */
-	u_quad_t icp6s_reflect;
-	u_quad_t icp6s_inhist[256];	
-	u_quad_t icp6s_nd_toomanyopt;	/* too many ND options */
-	struct icmp6errstat icp6s_outerrhist;
-#define icp6s_odst_unreach_noroute \
-	icp6s_outerrhist.icp6errs_dst_unreach_noroute
-#define icp6s_odst_unreach_admin icp6s_outerrhist.icp6errs_dst_unreach_admin
-#define icp6s_odst_unreach_beyondscope \
-	icp6s_outerrhist.icp6errs_dst_unreach_beyondscope
-#define icp6s_odst_unreach_addr icp6s_outerrhist.icp6errs_dst_unreach_addr
-#define icp6s_odst_unreach_noport icp6s_outerrhist.icp6errs_dst_unreach_noport
-#define icp6s_opacket_too_big icp6s_outerrhist.icp6errs_packet_too_big
-#define icp6s_otime_exceed_transit \
-	icp6s_outerrhist.icp6errs_time_exceed_transit
-#define icp6s_otime_exceed_reassembly \
-	icp6s_outerrhist.icp6errs_time_exceed_reassembly
-#define icp6s_oparamprob_header icp6s_outerrhist.icp6errs_paramprob_header
-#define icp6s_oparamprob_nextheader \
-	icp6s_outerrhist.icp6errs_paramprob_nextheader
-#define icp6s_oparamprob_option icp6s_outerrhist.icp6errs_paramprob_option
-#define icp6s_oredirect icp6s_outerrhist.icp6errs_redirect
-#define icp6s_ounknown icp6s_outerrhist.icp6errs_unknown
-	u_quad_t icp6s_pmtuchg;		/* path MTU changes */
-	u_quad_t icp6s_nd_badopt;	/* bad ND options */
-	u_quad_t icp6s_badns;		/* bad neighbor solicitation */
-	u_quad_t icp6s_badna;		/* bad neighbor advertisement */
-	u_quad_t icp6s_badrs;		/* bad router advertisement */
-	u_quad_t icp6s_badra;		/* bad router advertisement */
-	u_quad_t icp6s_badredirect;	/* bad redirect message */
-};
-
-/*
- * Names for ICMP sysctl objects
- */
-#define ICMPV6CTL_STATS		1
-#define ICMPV6CTL_REDIRACCEPT	2	/* accept/process redirects */
-#define ICMPV6CTL_REDIRTIMEOUT	3	/* redirect cache time */
-#if 0	/*obsoleted*/
-#define ICMPV6CTL_ERRRATELIMIT	5	/* ICMPv6 error rate limitation */
-#endif
-#define ICMPV6CTL_ND6_PRUNE	6
-#define ICMPV6CTL_ND6_DELAY	8
-#define ICMPV6CTL_ND6_UMAXTRIES	9
-#define ICMPV6CTL_ND6_MMAXTRIES		10
-#define ICMPV6CTL_ND6_USELOOPBACK	11
-/*#define ICMPV6CTL_ND6_PROXYALL	12	obsoleted, do not reuse here */
-#define ICMPV6CTL_NODEINFO	13
-#define ICMPV6CTL_ERRPPSLIMIT	14	/* ICMPv6 error pps limitation */
-#define ICMPV6CTL_ND6_MAXNUDHINT	15
-#define ICMPV6CTL_MTUDISC_HIWAT	16
-#define ICMPV6CTL_MTUDISC_LOWAT	17
-#define ICMPV6CTL_ND6_DEBUG	18
-#define ICMPV6CTL_ND6_DRLIST	19
-#define ICMPV6CTL_ND6_PRLIST	20
-#define ICMPV6CTL_MAXID		21
-
-#define ICMPV6CTL_NAMES { \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "rediraccept", CTLTYPE_INT }, \
-	{ "redirtimeout", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "nd6_prune", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ "nd6_delay", CTLTYPE_INT }, \
-	{ "nd6_umaxtries", CTLTYPE_INT }, \
-	{ "nd6_mmaxtries", CTLTYPE_INT }, \
-	{ "nd6_useloopback", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ "nodeinfo", CTLTYPE_INT }, \
-	{ "errppslimit", CTLTYPE_INT }, \
-	{ "nd6_maxnudhint", CTLTYPE_INT }, \
-	{ "mtudisc_hiwat", CTLTYPE_INT }, \
-	{ "mtudisc_lowat", CTLTYPE_INT }, \
-	{ "nd6_debug", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-}
-
-#define RTF_PROBEMTU	RTF_PROTO1
-
-#ifdef _KERNEL
-# ifdef __STDC__
-struct	rtentry;
-struct	rttimer;
-struct	in6_multi;
-# endif
-void	icmp6_init(void);
-void	icmp6_paramerror(struct mbuf *, int);
-void	icmp6_error(struct mbuf *, int, int, int);
-int	icmp6_input(struct mbuf **, int *, int);
-void	icmp6_fasttimo(void);
-void	icmp6_reflect(struct mbuf *, size_t);
-void	icmp6_prepare(struct mbuf *);
-void	icmp6_redirect_input(struct mbuf *, int);
-void	icmp6_redirect_output(struct mbuf *, struct rtentry *);
-
-struct	ip6ctlparam;
-void	icmp6_mtudisc_update(struct ip6ctlparam *, int);
-
-/* XXX: is this the right place for these macros? */
-#define icmp6_ifstat_inc(ifp, tag) \
-do {								\
-	if ((ifp) && (ifp)->if_index <= if_index			\
-	 && (ifp)->if_index < icmp6_ifstatmax			\
-	 && icmp6_ifstat && icmp6_ifstat[(ifp)->if_index]) {	\
-		icmp6_ifstat[(ifp)->if_index]->tag++;		\
-	}							\
-} while (0)
-
-#define icmp6_ifoutstat_inc(ifp, type, code) \
-do { \
-		icmp6_ifstat_inc(ifp, ifs6_out_msg); \
- 		if (type < ICMP6_INFOMSG_MASK) \
- 			icmp6_ifstat_inc(ifp, ifs6_out_error); \
-		switch(type) { \
-		 case ICMP6_DST_UNREACH: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_dstunreach); \
-			 if (code == ICMP6_DST_UNREACH_ADMIN) \
-				 icmp6_ifstat_inc(ifp, ifs6_out_adminprohib); \
-			 break; \
-		 case ICMP6_PACKET_TOO_BIG: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_pkttoobig); \
-			 break; \
-		 case ICMP6_TIME_EXCEEDED: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_timeexceed); \
-			 break; \
-		 case ICMP6_PARAM_PROB: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_paramprob); \
-			 break; \
-		 case ICMP6_ECHO_REQUEST: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_echo); \
-			 break; \
-		 case ICMP6_ECHO_REPLY: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_echoreply); \
-			 break; \
-		 case MLD_LISTENER_QUERY: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_mldquery); \
-			 break; \
-		 case MLD_LISTENER_REPORT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_mldreport); \
-			 break; \
-		 case MLD_LISTENER_DONE: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_mlddone); \
-			 break; \
-		 case ND_ROUTER_SOLICIT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_routersolicit); \
-			 break; \
-		 case ND_ROUTER_ADVERT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_routeradvert); \
-			 break; \
-		 case ND_NEIGHBOR_SOLICIT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_neighborsolicit); \
-			 break; \
-		 case ND_NEIGHBOR_ADVERT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_neighboradvert); \
-			 break; \
-		 case ND_REDIRECT: \
-			 icmp6_ifstat_inc(ifp, ifs6_out_redirect); \
-			 break; \
-		} \
-} while (0)
-
-extern int	icmp6_rediraccept;	/* accept/process redirects */
-extern int	icmp6_redirtimeout;	/* cache time for redirect routes */
-#endif /* _KERNEL */
-
-#endif /* not _NETINET_ICMP6_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/icmp_var.h b/newlib/libc/sys/linux/include/netinet/icmp_var.h
deleted file mode 100644
index 79ce146db..000000000
--- a/newlib/libc/sys/linux/include/netinet/icmp_var.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)icmp_var.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/icmp_var.h,v 1.21 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_ICMP_VAR_H_
-#define _NETINET_ICMP_VAR_H_
-
-
-/*
- * Variables related to this implementation
- * of the internet control message protocol.
- */
-struct	icmpstat {
-/* statistics related to icmp packets generated */
-	u_long	icps_error;		/* # of calls to icmp_error */
-	u_long	icps_oldshort;		/* no error 'cuz old ip too short */
-	u_long	icps_oldicmp;		/* no error 'cuz old was icmp */
-	u_long	icps_outhist[ICMP_MAXTYPE + 1];
-/* statistics related to input messages processed */
- 	u_long	icps_badcode;		/* icmp_code out of range */
-	u_long	icps_tooshort;		/* packet < ICMP_MINLEN */
-	u_long	icps_checksum;		/* bad checksum */
-	u_long	icps_badlen;		/* calculated bound mismatch */
-	u_long	icps_reflect;		/* number of responses */
-	u_long	icps_inhist[ICMP_MAXTYPE + 1];
-	u_long	icps_bmcastecho; 	/* b/mcast echo requests dropped */
-	u_long	icps_bmcasttstamp; 	/* b/mcast tstamp requests dropped */
-	u_long	icps_badaddr;		/* bad return address */
-	u_long	icps_noroute; 		/* no route back */
-};
-
-/*
- * Names for ICMP sysctl objects
- */
-#define	ICMPCTL_MASKREPL	1	/* allow replies to netmask requests */
-#define	ICMPCTL_STATS		2	/* statistics (read-only) */
-#define ICMPCTL_ICMPLIM		3
-#define ICMPCTL_MAXID		4
-
-#define ICMPCTL_NAMES { \
-	{ 0, 0 }, \
-	{ "maskrepl", CTLTYPE_INT }, \
-	{ "stats", CTLTYPE_STRUCT }, \
-	{ "icmplim", CTLTYPE_INT }, \
-}
-
-#ifdef _KERNEL
-SYSCTL_DECL(_net_inet_icmp);
-extern int badport_bandlim(int);
-#define BANDLIM_UNLIMITED -1
-#define BANDLIM_ICMP_UNREACH 0
-#define BANDLIM_ICMP_ECHO 1
-#define BANDLIM_ICMP_TSTAMP 2
-#define BANDLIM_RST_CLOSEDPORT 3 /* No connection, and no listeners */
-#define BANDLIM_RST_OPENPORT 4   /* No connection, listener */
-#define BANDLIM_MAX 4
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/if_atm.h b/newlib/libc/sys/linux/include/netinet/if_atm.h
deleted file mode 100644
index 04ce13ea2..000000000
--- a/newlib/libc/sys/linux/include/netinet/if_atm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* $FreeBSD: src/sys/netinet/if_atm.h,v 1.5 2002/03/19 21:25:46 alfred Exp $ */
-/*      $NetBSD: if_atm.h,v 1.2 1996/07/03 17:17:17 chuck Exp $       */
-
-/*
- *
- * Copyright (c) 1996 Charles D. Cranor and Washington University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Charles D. Cranor and 
- * 	Washington University.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * if_atm.h
- */
-
-struct atm_pseudohdr;
-struct mbuf;
-struct rtentry;
-struct sockaddr;
-
-void atm_rtrequest(int, struct rtentry *, struct rt_addrinfo *);
-int atmresolve(struct rtentry *, struct mbuf *, struct sockaddr *, 
-		struct atm_pseudohdr *);
diff --git a/newlib/libc/sys/linux/include/netinet/if_ether.h b/newlib/libc/sys/linux/include/netinet/if_ether.h
deleted file mode 100644
index ec65a3e58..000000000
--- a/newlib/libc/sys/linux/include/netinet/if_ether.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)if_ether.h	8.3 (Berkeley) 5/2/95
- * $FreeBSD: src/sys/netinet/if_ether.h,v 1.27 2002/03/24 10:19:10 bde Exp $
- */
-
-#ifndef _NETINET_IF_ETHER_H_
-#define _NETINET_IF_ETHER_H_
-
-#include <net/ethernet.h>
-#include <net/if_arp.h>
-
-/*
- * Macro to map an IP multicast address to an Ethernet multicast address.
- * The high-order 25 bits of the Ethernet address are statically assigned,
- * and the low-order 23 bits are taken from the low end of the IP address.
- */
-#define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \
-	/* struct in_addr *ipaddr; */ \
-	/* u_char enaddr[ETHER_ADDR_LEN];	   */ \
-{ \
-	(enaddr)[0] = 0x01; \
-	(enaddr)[1] = 0x00; \
-	(enaddr)[2] = 0x5e; \
-	(enaddr)[3] = ((u_char *)ipaddr)[1] & 0x7f; \
-	(enaddr)[4] = ((u_char *)ipaddr)[2]; \
-	(enaddr)[5] = ((u_char *)ipaddr)[3]; \
-}
-/*
- * Macro to map an IP6 multicast address to an Ethernet multicast address.
- * The high-order 16 bits of the Ethernet address are statically assigned,
- * and the low-order 32 bits are taken from the low end of the IP6 address.
- */
-#define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr)			\
-/* struct	in6_addr *ip6addr; */					\
-/* u_char	enaddr[ETHER_ADDR_LEN]; */				\
-{                                                                       \
-	(enaddr)[0] = 0x33;						\
-	(enaddr)[1] = 0x33;						\
-	(enaddr)[2] = ((u_char *)ip6addr)[12];				\
-	(enaddr)[3] = ((u_char *)ip6addr)[13];				\
-	(enaddr)[4] = ((u_char *)ip6addr)[14];				\
-	(enaddr)[5] = ((u_char *)ip6addr)[15];				\
-}
-
-/*
- * Ethernet Address Resolution Protocol.
- *
- * See RFC 826 for protocol description.  Structure below is adapted
- * to resolving internet addresses.  Field names used correspond to
- * RFC 826.
- */
-struct	ether_arp {
-	struct	arphdr ea_hdr;	/* fixed-size header */
-	u_char	arp_sha[ETHER_ADDR_LEN];	/* sender hardware address */
-	u_char	arp_spa[4];	/* sender protocol address */
-	u_char	arp_tha[ETHER_ADDR_LEN];	/* target hardware address */
-	u_char	arp_tpa[4];	/* target protocol address */
-};
-#define	arp_hrd	ea_hdr.ar_hrd
-#define	arp_pro	ea_hdr.ar_pro
-#define	arp_hln	ea_hdr.ar_hln
-#define	arp_pln	ea_hdr.ar_pln
-#define	arp_op	ea_hdr.ar_op
-
-struct sockaddr_inarp {
-	u_char	sin_len;
-	u_char	sin_family;
-	u_short sin_port;
-	struct	in_addr sin_addr;
-	struct	in_addr sin_srcaddr;
-	u_short	sin_tos;
-	u_short	sin_other;
-#define SIN_PROXY 1
-};
-/*
- * IP and ethernet specific routing flags
- */
-#define	RTF_USETRAILERS	RTF_PROTO1	/* use trailers */
-#define RTF_ANNOUNCE	RTF_PROTO2	/* announce new arp entry */
-
-#ifdef	_KERNEL
-extern u_char	ether_ipmulticast_min[ETHER_ADDR_LEN];
-extern u_char	ether_ipmulticast_max[ETHER_ADDR_LEN];
-extern struct	ifqueue arpintrq;
-
-int	arpresolve(struct ifnet *, struct rtentry *, struct mbuf *,
-	    struct sockaddr *, u_char *, struct rtentry *);
-void	arp_ifinit(struct ifnet *, struct ifaddr *);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/igmp.h b/newlib/libc/sys/linux/include/netinet/igmp.h
deleted file mode 100644
index 448265abf..000000000
--- a/newlib/libc/sys/linux/include/netinet/igmp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (c) 1988 Stephen Deering.
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Stephen Deering of Stanford University.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)igmp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/igmp.h,v 1.10 1999/08/28 00:49:15 peter Exp $
- */
-
-#ifndef _NETINET_IGMP_H_
-#define _NETINET_IGMP_H_
-
-/*
- * Internet Group Management Protocol (IGMP) definitions.
- *
- * Written by Steve Deering, Stanford, May 1988.
- *
- * MULTICAST Revision: 3.5.1.2
- */
-
-/*
- * IGMP packet format.
- */
-struct igmp {
-	u_char		igmp_type;	/* version & type of IGMP message  */
-	u_char		igmp_code;	/* subtype for routing msgs        */
-	u_short		igmp_cksum;	/* IP-style checksum               */
-	struct in_addr	igmp_group;	/* group address being reported    */
-};					/*  (zero for queries)             */
-
-#define IGMP_MINLEN		     8
-
-/*
- * Message types, including version number.
- */
-#define IGMP_MEMBERSHIP_QUERY   	0x11	/* membership query         */
-#define IGMP_V1_MEMBERSHIP_REPORT	0x12	/* Ver. 1 membership report */
-#define IGMP_V2_MEMBERSHIP_REPORT	0x16	/* Ver. 2 membership report */
-#define IGMP_V2_LEAVE_GROUP		0x17	/* Leave-group message	    */
-
-#define IGMP_DVMRP			0x13	/* DVMRP routing message    */
-#define IGMP_PIM			0x14	/* PIM routing message	    */
-
-#define IGMP_MTRACE_RESP		0x1e  /* traceroute resp.(to sender)*/
-#define IGMP_MTRACE			0x1f  /* mcast traceroute messages  */
-
-#define IGMP_MAX_HOST_REPORT_DELAY   10    /* max delay for response to     */
-					   /*  query (in seconds) according */
-					   /*  to RFC1112                   */
-
-
-#define IGMP_TIMER_SCALE     10		/* denotes that the igmp code field */
-					/* specifies time in 10th of seconds*/
-
-/*
- * The following four defininitions are for backwards compatibility.
- * They should be removed as soon as all applications are updated to
- * use the new constant names.
- */
-#define IGMP_HOST_MEMBERSHIP_QUERY	IGMP_MEMBERSHIP_QUERY
-#define IGMP_HOST_MEMBERSHIP_REPORT	IGMP_V1_MEMBERSHIP_REPORT
-#define IGMP_HOST_NEW_MEMBERSHIP_REPORT	IGMP_V2_MEMBERSHIP_REPORT
-#define IGMP_HOST_LEAVE_MESSAGE		IGMP_V2_LEAVE_GROUP
-
-#endif /* _NETINET_IGMP_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/igmp_var.h b/newlib/libc/sys/linux/include/netinet/igmp_var.h
deleted file mode 100644
index 1cb6570f8..000000000
--- a/newlib/libc/sys/linux/include/netinet/igmp_var.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (c) 1988 Stephen Deering.
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Stephen Deering of Stanford University.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	from: @(#)igmp_var.h	8.1 (Berkeley) 7/19/93
- * $FreeBSD: src/sys/netinet/igmp_var.h,v 1.19 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_IGMP_VAR_H_
-#define _NETINET_IGMP_VAR_H_
-
-/*
- * Internet Group Management Protocol (IGMP),
- * implementation-specific definitions.
- *
- * Written by Steve Deering, Stanford, May 1988.
- *
- * MULTICAST Revision: 3.5.1.3
- */
-
-struct igmpstat {
-	u_int	igps_rcv_total;		/* total IGMP messages received */
-	u_int	igps_rcv_tooshort;	/* received with too few bytes */
-	u_int	igps_rcv_badsum;	/* received with bad checksum */
-	u_int	igps_rcv_queries;	/* received membership queries */
-	u_int	igps_rcv_badqueries;	/* received invalid queries */
-	u_int	igps_rcv_reports;	/* received membership reports */
-	u_int	igps_rcv_badreports;	/* received invalid reports */
-	u_int	igps_rcv_ourreports;	/* received reports for our groups */
-	u_int	igps_snd_reports;	/* sent membership reports */
-};
-
-#ifdef _KERNEL
-#define IGMP_RANDOM_DELAY(X) (random() % (X) + 1)
-
-/*
- * States for IGMPv2's leave processing
- */
-#define IGMP_OTHERMEMBER			0
-#define IGMP_IREPORTEDLAST			1
-
-/*
- * We must remember what version the subnet's querier is.
- * We conveniently use the IGMP message type for the proper
- * membership report to keep this state.
- */
-#define IGMP_V1_ROUTER				IGMP_V1_MEMBERSHIP_REPORT
-#define IGMP_V2_ROUTER				IGMP_V2_MEMBERSHIP_REPORT
-
-/*
- * Revert to new router if we haven't heard from an old router in
- * this amount of time.
- */
-#define IGMP_AGE_THRESHOLD			540
-
-void	igmp_init(void);
-void	igmp_input(struct mbuf *, int);
-void	igmp_joingroup(struct in_multi *);
-void	igmp_leavegroup(struct in_multi *);
-void	igmp_fasttimo(void);
-void	igmp_slowtimo(void);
-
-SYSCTL_DECL(_net_inet_igmp);
-
-#endif
-
-/*
- * Names for IGMP sysctl objects
- */
-#define IGMPCTL_STATS		1	/* statistics (read-only) */
-#define IGMPCTL_MAXID		2
-
-#define IGMPCTL_NAMES { \
-	{ 0, 0 }, \
-	{ "stats", CTLTYPE_STRUCT }, \
-}
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/in.h b/newlib/libc/sys/linux/include/netinet/in.h
deleted file mode 100644
index 19bc3f1bc..000000000
--- a/newlib/libc/sys/linux/include/netinet/in.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in.h	8.3 (Berkeley) 1/3/94
- * $FreeBSD: src/sys/netinet/in.h,v 1.68 2002/04/24 01:26:11 mike Exp $
- */
-
-#ifndef _NETINET_IN_H_
-#define _NETINET_IN_H_
-
-#include <sys/cdefs.h>
-#include <sys/config.h>
-#include <sys/_types.h>
-#include <machine/endian.h>
-
-/* Protocols common to RFC 1700, POSIX, and X/Open. */
-#define	IPPROTO_IP		0		/* dummy for IP */
-#define	IPPROTO_ICMP		1		/* control message protocol */
-#define	IPPROTO_TCP		6		/* tcp */
-#define	IPPROTO_UDP		17		/* user datagram protocol */
-
-#define	INADDR_ANY		(u_int32_t)0x00000000
-#define	INADDR_BROADCAST	(u_int32_t)0xffffffff	/* must be masked */
-
-#ifndef _UINT8_T_DECLARED
-typedef	__uint8_t		uint8_t;
-#define	_UINT8_T_DECLARED
-#endif
-
-#ifndef _UINT16_T_DECLARED
-typedef	__uint16_t		uint16_t;
-#define	_UINT16_T_DECLARED
-#endif
-
-#ifndef _UINT32_T_DECLARED
-typedef	__uint32_t		uint32_t;
-#define	_UINT32_T_DECLARED
-#endif
-
-#ifndef _IN_ADDR_T_DECLARED
-typedef	uint32_t		in_addr_t;
-#define	_IN_ADDR_T_DECLARED
-#endif
-
-#ifndef _IN_PORT_T_DECLARED
-typedef	uint16_t		in_port_t;
-#define	_IN_PORT_T_DECLARED
-#endif
-
-typedef unsigned short sa_family_t;
-
-#ifdef _BSD_SA_FAMILY_T_
-typedef	_BSD_SA_FAMILY_T_	sa_family_t;
-#undef _BSD_SA_FAMILY_T_ 
-#endif
-
-/* Internet address (a structure for historical reasons). */
-#ifndef	_STRUCT_IN_ADDR_DECLARED
-struct in_addr {
-	in_addr_t s_addr;
-};
-#define	_STRUCT_IN_ADDR_DECLARED
-#endif
-
-/* Socket address, internet style. */
-struct sockaddr_in {
-	sa_family_t	sin_family;
-	in_port_t	sin_port;
-	struct	in_addr sin_addr;
-	char	sin_zero[8];
-};
-
-#if __POSIX_VISIBLE >= 200112
-#define	IPPROTO_RAW		255		/* raw IP packet */
-#define	INET_ADDRSTRLEN		16
-#endif
-
-#define __BSD_VISIBLE 1
-#if __BSD_VISIBLE
-/*
- * Constants and structures defined by the internet system,
- * Per RFC 790, September 1981, and numerous additions.
- */
-
-/*
- * Protocols (RFC 1700)
- */
-#define	IPPROTO_HOPOPTS		0		/* IP6 hop-by-hop options */
-#define	IPPROTO_IGMP		2		/* group mgmt protocol */
-#define	IPPROTO_GGP		3		/* gateway^2 (deprecated) */
-#define IPPROTO_IPV4		4 		/* IPv4 encapsulation */
-#define IPPROTO_IPIP		IPPROTO_IPV4	/* for compatibility */
-#define	IPPROTO_ST		7		/* Stream protocol II */
-#define	IPPROTO_EGP		8		/* exterior gateway protocol */
-#define	IPPROTO_PIGP		9		/* private interior gateway */
-#define	IPPROTO_RCCMON		10		/* BBN RCC Monitoring */
-#define	IPPROTO_NVPII		11		/* network voice protocol*/
-#define	IPPROTO_PUP		12		/* pup */
-#define	IPPROTO_ARGUS		13		/* Argus */
-#define	IPPROTO_EMCON		14		/* EMCON */
-#define	IPPROTO_XNET		15		/* Cross Net Debugger */
-#define	IPPROTO_CHAOS		16		/* Chaos*/
-#define	IPPROTO_MUX		18		/* Multiplexing */
-#define	IPPROTO_MEAS		19		/* DCN Measurement Subsystems */
-#define	IPPROTO_HMP		20		/* Host Monitoring */
-#define	IPPROTO_PRM		21		/* Packet Radio Measurement */
-#define	IPPROTO_IDP		22		/* xns idp */
-#define	IPPROTO_TRUNK1		23		/* Trunk-1 */
-#define	IPPROTO_TRUNK2		24		/* Trunk-2 */
-#define	IPPROTO_LEAF1		25		/* Leaf-1 */
-#define	IPPROTO_LEAF2		26		/* Leaf-2 */
-#define	IPPROTO_RDP		27		/* Reliable Data */
-#define	IPPROTO_IRTP		28		/* Reliable Transaction */
-#define	IPPROTO_TP		29 		/* tp-4 w/ class negotiation */
-#define	IPPROTO_BLT		30		/* Bulk Data Transfer */
-#define	IPPROTO_NSP		31		/* Network Services */
-#define	IPPROTO_INP		32		/* Merit Internodal */
-#define	IPPROTO_SEP		33		/* Sequential Exchange */
-#define	IPPROTO_3PC		34		/* Third Party Connect */
-#define	IPPROTO_IDPR		35		/* InterDomain Policy Routing */
-#define	IPPROTO_XTP		36		/* XTP */
-#define	IPPROTO_DDP		37		/* Datagram Delivery */
-#define	IPPROTO_CMTP		38		/* Control Message Transport */
-#define	IPPROTO_TPXX		39		/* TP++ Transport */
-#define	IPPROTO_IL		40		/* IL transport protocol */
-#define	IPPROTO_IPV6		41		/* IP6 header */
-#define	IPPROTO_SDRP		42		/* Source Demand Routing */
-#define	IPPROTO_ROUTING		43		/* IP6 routing header */
-#define	IPPROTO_FRAGMENT	44		/* IP6 fragmentation header */
-#define	IPPROTO_IDRP		45		/* InterDomain Routing*/
-#define	IPPROTO_RSVP		46 		/* resource reservation */
-#define	IPPROTO_GRE		47		/* General Routing Encap. */
-#define	IPPROTO_MHRP		48		/* Mobile Host Routing */
-#define	IPPROTO_BHA		49		/* BHA */
-#define	IPPROTO_ESP		50		/* IP6 Encap Sec. Payload */
-#define	IPPROTO_AH		51		/* IP6 Auth Header */
-#define	IPPROTO_INLSP		52		/* Integ. Net Layer Security */
-#define	IPPROTO_SWIPE		53		/* IP with encryption */
-#define	IPPROTO_NHRP		54		/* Next Hop Resolution */
-#define IPPROTO_MOBILE		55		/* IP Mobility */
-#define IPPROTO_TLSP		56		/* Transport Layer Security */
-#define IPPROTO_SKIP		57		/* SKIP */
-#define	IPPROTO_ICMPV6		58		/* ICMP6 */
-#define	IPPROTO_NONE		59		/* IP6 no next header */
-#define	IPPROTO_DSTOPTS		60		/* IP6 destination option */
-#define	IPPROTO_AHIP		61		/* any host internal protocol */
-#define	IPPROTO_CFTP		62		/* CFTP */
-#define	IPPROTO_HELLO		63		/* "hello" routing protocol */
-#define	IPPROTO_SATEXPAK	64		/* SATNET/Backroom EXPAK */
-#define	IPPROTO_KRYPTOLAN	65		/* Kryptolan */
-#define	IPPROTO_RVD		66		/* Remote Virtual Disk */
-#define	IPPROTO_IPPC		67		/* Pluribus Packet Core */
-#define	IPPROTO_ADFS		68		/* Any distributed FS */
-#define	IPPROTO_SATMON		69		/* Satnet Monitoring */
-#define	IPPROTO_VISA		70		/* VISA Protocol */
-#define	IPPROTO_IPCV		71		/* Packet Core Utility */
-#define	IPPROTO_CPNX		72		/* Comp. Prot. Net. Executive */
-#define	IPPROTO_CPHB		73		/* Comp. Prot. HeartBeat */
-#define	IPPROTO_WSN		74		/* Wang Span Network */
-#define	IPPROTO_PVP		75		/* Packet Video Protocol */
-#define	IPPROTO_BRSATMON	76		/* BackRoom SATNET Monitoring */
-#define	IPPROTO_ND		77		/* Sun net disk proto (temp.) */
-#define	IPPROTO_WBMON		78		/* WIDEBAND Monitoring */
-#define	IPPROTO_WBEXPAK		79		/* WIDEBAND EXPAK */
-#define	IPPROTO_EON		80		/* ISO cnlp */
-#define	IPPROTO_VMTP		81		/* VMTP */
-#define	IPPROTO_SVMTP		82		/* Secure VMTP */
-#define	IPPROTO_VINES		83		/* Banyon VINES */
-#define	IPPROTO_TTP		84		/* TTP */
-#define	IPPROTO_IGP		85		/* NSFNET-IGP */
-#define	IPPROTO_DGP		86		/* dissimilar gateway prot. */
-#define	IPPROTO_TCF		87		/* TCF */
-#define	IPPROTO_IGRP		88		/* Cisco/GXS IGRP */
-#define	IPPROTO_OSPFIGP		89		/* OSPFIGP */
-#define	IPPROTO_SRPC		90		/* Strite RPC protocol */
-#define	IPPROTO_LARP		91		/* Locus Address Resoloution */
-#define	IPPROTO_MTP		92		/* Multicast Transport */
-#define	IPPROTO_AX25		93		/* AX.25 Frames */
-#define	IPPROTO_IPEIP		94		/* IP encapsulated in IP */
-#define	IPPROTO_MICP		95		/* Mobile Int.ing control */
-#define	IPPROTO_SCCSP		96		/* Semaphore Comm. security */
-#define	IPPROTO_ETHERIP		97		/* Ethernet IP encapsulation */
-#define	IPPROTO_ENCAP		98		/* encapsulation header */
-#define	IPPROTO_APES		99		/* any private encr. scheme */
-#define	IPPROTO_GMTP		100		/* GMTP*/
-#define	IPPROTO_IPCOMP		108		/* payload compression (IPComp) */
-/* 101-254: Partly Unassigned */
-#define	IPPROTO_PIM		103		/* Protocol Independent Mcast */
-#define	IPPROTO_PGM		113		/* PGM */
-/* 255: Reserved */
-/* BSD Private, local use, namespace incursion */
-#define	IPPROTO_DIVERT		254		/* divert pseudo-protocol */
-#define	IPPROTO_MAX		256
-
-/* last return value of *_input(), meaning "all job for this pkt is done".  */
-#define	IPPROTO_DONE		257
-
-/*
- * Local port number conventions:
- *
- * When a user does a bind(2) or connect(2) with a port number of zero,
- * a non-conflicting local port address is chosen.
- * The default range is IPPORT_HIFIRSTAUTO through
- * IPPORT_HILASTAUTO, although that is settable by sysctl.
- *
- * A user may set the IPPROTO_IP option IP_PORTRANGE to change this
- * default assignment range.
- *
- * The value IP_PORTRANGE_DEFAULT causes the default behavior.
- *
- * The value IP_PORTRANGE_HIGH changes the range of candidate port numbers
- * into the "high" range.  These are reserved for client outbound connections
- * which do not want to be filtered by any firewalls.  Note that by default
- * this is the same as IP_PORTRANGE_DEFAULT.
- *
- * The value IP_PORTRANGE_LOW changes the range to the "low" are
- * that is (by convention) restricted to privileged processes.  This
- * convention is based on "vouchsafe" principles only.  It is only secure
- * if you trust the remote host to restrict these ports.
- *
- * The default range of ports and the high range can be changed by
- * sysctl(3).  (net.inet.ip.port{hi,low}{first,last}_auto)
- *
- * Changing those values has bad security implications if you are
- * using a a stateless firewall that is allowing packets outside of that
- * range in order to allow transparent outgoing connections.
- *
- * Such a firewall configuration will generally depend on the use of these
- * default values.  If you change them, you may find your Security
- * Administrator looking for you with a heavy object.
- *
- * For a slightly more orthodox text view on this:
- *
- *            ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
- *
- *    port numbers are divided into three ranges:
- *
- *                0 -  1023 Well Known Ports
- *             1024 - 49151 Registered Ports
- *            49152 - 65535 Dynamic and/or Private Ports
- *
- */
-
-/*
- * Ports < IPPORT_RESERVED are reserved for
- * privileged processes (e.g. root).         (IP_PORTRANGE_LOW)
- */
-#define	IPPORT_RESERVED		1024
-
-/*
- * Default local port range, used by both IP_PORTRANGE_DEFAULT
- * and IP_PORTRANGE_HIGH.
- */
-#define	IPPORT_HIFIRSTAUTO	49152
-#define	IPPORT_HILASTAUTO	65535
-
-/*
- * Scanning for a free reserved port return a value below IPPORT_RESERVED,
- * but higher than IPPORT_RESERVEDSTART.  Traditionally the start value was
- * 512, but that conflicts with some well-known-services that firewalls may
- * have a fit if we use.
- */
-#define IPPORT_RESERVEDSTART	600
-
-#define	IPPORT_MAX		65535
-
-#ifndef _UINT8_T_DECLARED
-typedef	__uint8_t		uint8_t;
-#define	_UINT8_T_DECLARED
-#endif
-
-#ifndef _UINT16_T_DECLARED
-typedef	__uint16_t		uint16_t;
-#define	_UINT16_T_DECLARED
-#endif
-
-#ifndef _UINT32_T_DECLARED
-typedef	__uint32_t		uint32_t;
-#define	_UINT32_T_DECLARED
-#endif
-
-#ifndef _IN_ADDR_T_DECLARED
-typedef	uint32_t		in_addr_t;
-#define	_IN_ADDR_T_DECLARED
-#endif
-
-#ifndef _IN_PORT_T_DECLARED
-typedef	uint16_t		in_port_t;
-#define	_IN_PORT_T_DECLARED
-#endif
-
-#ifdef _BSD_SA_FAMILY_T_
-typedef	_BSD_SA_FAMILY_T_	sa_family_t;
-#undef _BSD_SA_FAMILY_T_
-#endif
-
-/*
- * Internet address (a structure for historical reasons)
- */
-#ifndef	_STRUCT_IN_ADDR_DECLARED
-struct in_addr {
-	in_addr_t s_addr;
-};
-#define	_STRUCT_IN_ADDR_DECLARED
-#endif
-
-/*
- * Definitions of bits in internet address integers.
- * On subnets, the decomposition of addresses to host and net parts
- * is done according to subnet mask, not the masks here.
- */
-#define	IN_CLASSA(i)		(((u_int32_t)(i) & 0x80000000) == 0)
-#define	IN_CLASSA_NET		0xff000000
-#define	IN_CLASSA_NSHIFT	24
-#define	IN_CLASSA_HOST		0x00ffffff
-#define	IN_CLASSA_MAX		128
-
-#define	IN_CLASSB(i)		(((u_int32_t)(i) & 0xc0000000) == 0x80000000)
-#define	IN_CLASSB_NET		0xffff0000
-#define	IN_CLASSB_NSHIFT	16
-#define	IN_CLASSB_HOST		0x0000ffff
-#define	IN_CLASSB_MAX		65536
-
-#define	IN_CLASSC(i)		(((u_int32_t)(i) & 0xe0000000) == 0xc0000000)
-#define	IN_CLASSC_NET		0xffffff00
-#define	IN_CLASSC_NSHIFT	8
-#define	IN_CLASSC_HOST		0x000000ff
-
-#define	IN_CLASSD(i)		(((u_int32_t)(i) & 0xf0000000) == 0xe0000000)
-#define	IN_CLASSD_NET		0xf0000000	/* These ones aren't really */
-#define	IN_CLASSD_NSHIFT	28		/* net and host fields, but */
-#define	IN_CLASSD_HOST		0x0fffffff	/* routing needn't know.    */
-#define	IN_MULTICAST(i)		IN_CLASSD(i)
-
-#define	IN_EXPERIMENTAL(i)	(((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-#define	IN_BADCLASS(i)		(((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-
-#define	INADDR_LOOPBACK		(u_int32_t)0x7f000001
-#ifndef _KERNEL
-#define	INADDR_NONE		0xffffffff		/* -1 return */
-#endif
-
-#define	INADDR_UNSPEC_GROUP	(u_int32_t)0xe0000000	/* 224.0.0.0 */
-#define	INADDR_ALLHOSTS_GROUP	(u_int32_t)0xe0000001	/* 224.0.0.1 */
-#define	INADDR_ALLRTRS_GROUP	(u_int32_t)0xe0000002	/* 224.0.0.2 */
-#define	INADDR_MAX_LOCAL_GROUP	(u_int32_t)0xe00000ff	/* 224.0.0.255 */
-
-#define	IN_LOOPBACKNET		127			/* official! */
-
-/*
- * Options for use with [gs]etsockopt at the IP level.
- * First word of comment is data type; bool is stored in int.
- */
-#define	IP_OPTIONS		1    /* buf/ip_opts; set/get IP options */
-#define	IP_HDRINCL		2    /* int; header is included with data */
-#define	IP_TOS			3    /* int; IP type of service and preced. */
-#define	IP_TTL			4    /* int; IP time to live */
-#define	IP_RECVOPTS		5    /* bool; receive all IP opts w/dgram */
-#define	IP_RECVRETOPTS		6    /* bool; receive IP opts for response */
-#define	IP_RECVDSTADDR		7    /* bool; receive IP dst addr w/dgram */
-#define	IP_RETOPTS		8    /* ip_opts; set/get IP options */
-#define	IP_MULTICAST_IF		9    /* u_char; set/get IP multicast i/f  */
-#define	IP_MULTICAST_TTL	10   /* u_char; set/get IP multicast ttl */
-#define	IP_MULTICAST_LOOP	11   /* u_char; set/get IP multicast loopback */
-#define	IP_ADD_MEMBERSHIP	12   /* ip_mreq; add an IP group membership */
-#define	IP_DROP_MEMBERSHIP	13   /* ip_mreq; drop an IP group membership */
-#define IP_MULTICAST_VIF	14   /* set/get IP mcast virt. iface */
-#define IP_RSVP_ON		15   /* enable RSVP in kernel */
-#define IP_RSVP_OFF		16   /* disable RSVP in kernel */
-#define IP_RSVP_VIF_ON		17   /* set RSVP per-vif socket */
-#define IP_RSVP_VIF_OFF		18   /* unset RSVP per-vif socket */
-#define IP_PORTRANGE		19   /* int; range to choose for unspec port */
-#define	IP_RECVIF		20   /* bool; receive reception if w/dgram */
-/* for IPSEC */
-#define	IP_IPSEC_POLICY		21   /* int; set/get security policy */
-#define	IP_FAITH		22   /* bool; accept FAITH'ed connections */
-
-#define	IP_FW_ADD     		50   /* add a firewall rule to chain */
-#define	IP_FW_DEL    		51   /* delete a firewall rule from chain */
-#define	IP_FW_FLUSH   		52   /* flush firewall rule chain */
-#define	IP_FW_ZERO    		53   /* clear single/all firewall counter(s) */
-#define	IP_FW_GET     		54   /* get entire firewall rule chain */
-#define	IP_FW_RESETLOG		55   /* reset logging counters */
-
-#define	IP_DUMMYNET_CONFIGURE	60   /* add/configure a dummynet pipe */
-#define	IP_DUMMYNET_DEL		61   /* delete a dummynet pipe from chain */
-#define	IP_DUMMYNET_FLUSH	62   /* flush dummynet */
-#define	IP_DUMMYNET_GET		64   /* get entire dummynet pipes */
-
-/*
- * Defaults and limits for options
- */
-#define	IP_DEFAULT_MULTICAST_TTL  1	/* normally limit m'casts to 1 hop  */
-#define	IP_DEFAULT_MULTICAST_LOOP 1	/* normally hear sends if a member  */
-#define	IP_MAX_MEMBERSHIPS	20	/* per socket */
-
-/*
- * Argument structure for IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP.
- */
-struct ip_mreq {
-	struct	in_addr imr_multiaddr;	/* IP multicast address of group */
-	struct	in_addr imr_interface;	/* local IP address of interface */
-};
-
-/*
- * Argument for IP_PORTRANGE:
- * - which range to search when port is unspecified at bind() or connect()
- */
-#define	IP_PORTRANGE_DEFAULT	0	/* default range */
-#define	IP_PORTRANGE_HIGH	1	/* "high" - request firewall bypass */
-#define	IP_PORTRANGE_LOW	2	/* "low" - vouchsafe security */
-
-/*
- * Definitions for inet sysctl operations.
- *
- * Third level is protocol number.
- * Fourth level is desired variable within that protocol.
- */
-#define	IPPROTO_MAXID	(IPPROTO_AH + 1)	/* don't list to IPPROTO_MAX */
-
-#define	CTL_IPPROTO_NAMES { \
-	{ "ip", CTLTYPE_NODE }, \
-	{ "icmp", CTLTYPE_NODE }, \
-	{ "igmp", CTLTYPE_NODE }, \
-	{ "ggp", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "tcp", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ "egp", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "pup", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "udp", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "idp", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "ipsec", CTLTYPE_NODE }, \
-}
-
-/*
- * Names for IP sysctl objects
- */
-#define	IPCTL_FORWARDING	1	/* act as router */
-#define	IPCTL_SENDREDIRECTS	2	/* may send redirects when forwarding */
-#define	IPCTL_DEFTTL		3	/* default TTL */
-#ifdef notyet
-#define	IPCTL_DEFMTU		4	/* default MTU */
-#endif
-#define IPCTL_RTEXPIRE		5	/* cloned route expiration time */
-#define IPCTL_RTMINEXPIRE	6	/* min value for expiration time */
-#define IPCTL_RTMAXCACHE	7	/* trigger level for dynamic expire */
-#define	IPCTL_SOURCEROUTE	8	/* may perform source routes */
-#define	IPCTL_DIRECTEDBROADCAST	9	/* may re-broadcast received packets */
-#define IPCTL_INTRQMAXLEN	10	/* max length of netisr queue */
-#define	IPCTL_INTRQDROPS	11	/* number of netisr q drops */
-#define	IPCTL_STATS		12	/* ipstat structure */
-#define	IPCTL_ACCEPTSOURCEROUTE	13	/* may accept source routed packets */
-#define	IPCTL_FASTFORWARDING	14	/* use fast IP forwarding code */
-#define	IPCTL_KEEPFAITH		15	/* FAITH IPv4->IPv6 translater ctl */
-#define	IPCTL_GIF_TTL		16	/* default TTL for gif encap packet */
-#define	IPCTL_MAXID		17
-
-#define	IPCTL_NAMES { \
-	{ 0, 0 }, \
-	{ "forwarding", CTLTYPE_INT }, \
-	{ "redirect", CTLTYPE_INT }, \
-	{ "ttl", CTLTYPE_INT }, \
-	{ "mtu", CTLTYPE_INT }, \
-	{ "rtexpire", CTLTYPE_INT }, \
-	{ "rtminexpire", CTLTYPE_INT }, \
-	{ "rtmaxcache", CTLTYPE_INT }, \
-	{ "sourceroute", CTLTYPE_INT }, \
- 	{ "directed-broadcast", CTLTYPE_INT }, \
-	{ "intr-queue-maxlen", CTLTYPE_INT }, \
-	{ "intr-queue-drops", CTLTYPE_INT }, \
-	{ "stats", CTLTYPE_STRUCT }, \
-	{ "accept_sourceroute", CTLTYPE_INT }, \
-	{ "fastforwarding", CTLTYPE_INT }, \
-}
-
-#endif /* __BSD_VISIBLE */
-
-#ifdef _KERNEL
-
-struct ifnet; struct mbuf;	/* forward declarations for Standard C */
-
-int	 in_broadcast(struct in_addr, struct ifnet *);
-int	 in_canforward(struct in_addr);
-int	 in_localaddr(struct in_addr);
-char 	*inet_ntoa(struct in_addr); /* in libkern */
-char	*inet_ntoa_r(struct in_addr ina, char *buf); /* in libkern */
-
-#define satosin(sa)	((struct sockaddr_in *)(sa))
-#define sintosa(sin)	((struct sockaddr *)(sin))
-#define ifatoia(ifa)	((struct in_ifaddr *)(ifa))
-
-#endif /* _KERNEL */
-
-/* INET6 stuff */
-#define	__KAME_NETINET_IN_H_INCLUDED_
-#include <netinet6/in6.h>
-#undef __KAME_NETINET_IN_H_INCLUDED_
-
-#endif /* !_NETINET_IN_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet/in_gif.h b/newlib/libc/sys/linux/include/netinet/in_gif.h
deleted file mode 100644
index cf5392009..000000000
--- a/newlib/libc/sys/linux/include/netinet/in_gif.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*	$FreeBSD: src/sys/netinet/in_gif.h,v 1.8 2002/03/19 21:25:46 alfred Exp $	*/
-/*	$KAME: in_gif.h,v 1.5 2000/04/14 08:36:02 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET_IN_GIF_H_
-#define _NETINET_IN_GIF_H_
-
-#define GIF_TTL		30
-
-void in_gif_input(struct mbuf *, int off);
-int in_gif_output(struct ifnet *, int, struct mbuf *, struct rtentry *);
-int gif_encapcheck4(const struct mbuf *, int, int, void *);
-
-#endif /*_NETINET_IN_GIF_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet/in_pcb.h b/newlib/libc/sys/linux/include/netinet/in_pcb.h
deleted file mode 100644
index 50ddd273c..000000000
--- a/newlib/libc/sys/linux/include/netinet/in_pcb.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in_pcb.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/in_pcb.h,v 1.48 2002/04/09 20:04:10 jhb Exp $
- */
-
-#ifndef _NETINET_IN_PCB_H_
-#define _NETINET_IN_PCB_H_
-
-#include <sys/queue.h>
-
-#include <net/route.h>
-#include <netinet6/ipsec.h> /* for IPSEC */
-#include <vm/uma.h>
-
-#define	in6pcb		inpcb	/* for KAME src sync over BSD*'s */
-#define	in6p_sp		inp_sp	/* for KAME src sync over BSD*'s */
-
-/*
- * Common structure pcb for internet protocol implementation.
- * Here are stored pointers to local and foreign host table
- * entries, local and foreign socket numbers, and pointers
- * up (to a socket structure) and down (to a protocol-specific)
- * control block.
- */
-LIST_HEAD(inpcbhead, inpcb);
-LIST_HEAD(inpcbporthead, inpcbport);
-typedef	u_quad_t	inp_gen_t;
-
-/*
- * PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet.
- * So, AF_INET6 null laddr is also used as AF_INET null laddr,
- * by utilize following structure. (At last, same as INRIA)
- */
-struct in_addr_4in6 {
-	u_int32_t	ia46_pad32[3];
-	struct	in_addr	ia46_addr4;
-};
-
-/*
- * NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553.
- * in_conninfo has some extra padding to accomplish this.
- */
-struct in_endpoints {
-	u_int16_t	ie_fport;		/* foreign port */
-	u_int16_t	ie_lport;		/* local port */
-	/* protocol dependent part, local and foreign addr */
-	union {
-		/* foreign host table entry */
-		struct	in_addr_4in6 ie46_foreign;
-		struct	in6_addr ie6_foreign;
-	} ie_dependfaddr;
-	union {
-		/* local host table entry */
-		struct	in_addr_4in6 ie46_local;
-		struct	in6_addr ie6_local;
-	} ie_dependladdr;
-#define	ie_faddr	ie_dependfaddr.ie46_foreign.ia46_addr4
-#define	ie_laddr	ie_dependladdr.ie46_local.ia46_addr4
-#define	ie6_faddr	ie_dependfaddr.ie6_foreign
-#define	ie6_laddr	ie_dependladdr.ie6_local
-};
-
-/*
- * XXX
- * At some point struct route should possibly change to:
- *   struct rtentry *rt
- *   struct in_endpoints *ie; 
- */
-struct in_conninfo {
-	u_int8_t	inc_flags;
-	u_int8_t	inc_len;
-	u_int16_t	inc_pad;	/* XXX alignment for in_endpoints */
-	/* protocol dependent part; cached route */
-	struct	in_endpoints inc_ie;
-	union {
-		/* placeholder for routing entry */
-		struct	route inc4_route;
-		struct	route_in6 inc6_route;
-	} inc_dependroute;
-};
-#define inc_isipv6	inc_flags	/* temp compatability */
-#define	inc_fport	inc_ie.ie_fport
-#define	inc_lport	inc_ie.ie_lport
-#define	inc_faddr	inc_ie.ie_faddr
-#define	inc_laddr	inc_ie.ie_laddr
-#define	inc_route	inc_dependroute.inc4_route
-#define	inc6_faddr	inc_ie.ie6_faddr
-#define	inc6_laddr	inc_ie.ie6_laddr
-#define	inc6_route	inc_dependroute.inc6_route
-
-struct	icmp6_filter;
-
-struct inpcb {
-	LIST_ENTRY(inpcb) inp_hash; /* hash list */
-	LIST_ENTRY(inpcb) inp_list; /* list for all PCBs of this proto */
-	u_int32_t	inp_flow;
-
-	/* local and foreign ports, local and foreign addr */
-	struct	in_conninfo inp_inc;
-
-	caddr_t	inp_ppcb;		/* pointer to per-protocol pcb */
-	struct	inpcbinfo *inp_pcbinfo;	/* PCB list info */
-	struct	socket *inp_socket;	/* back pointer to socket */
-					/* list for this PCB's local port */
-	int	inp_flags;		/* generic IP/datagram flags */
-
-	struct	inpcbpolicy *inp_sp; /* for IPSEC */
-	u_char	inp_vflag;		/* IP version flag (v4/v6) */
-#define	INP_IPV4	0x1
-#define	INP_IPV6	0x2
-	u_char	inp_ip_ttl;		/* time to live proto */
-	u_char	inp_ip_p;		/* protocol proto */
-
-	/* protocol dependent part; options */
-	struct {
-		u_char	inp4_ip_tos;		/* type of service proto */
-		struct	mbuf *inp4_options;	/* IP options */
-		struct	ip_moptions *inp4_moptions; /* IP multicast options */
-	} inp_depend4;
-#define inp_fport	inp_inc.inc_fport
-#define inp_lport	inp_inc.inc_lport
-#define	inp_faddr	inp_inc.inc_faddr
-#define	inp_laddr	inp_inc.inc_laddr
-#define	inp_route	inp_inc.inc_route
-#define	inp_ip_tos	inp_depend4.inp4_ip_tos
-#define	inp_options	inp_depend4.inp4_options
-#define	inp_moptions	inp_depend4.inp4_moptions
-	struct {
-		/* IP options */
-		struct	mbuf *inp6_options;
-		/* IP6 options for outgoing packets */
-		struct	ip6_pktopts *inp6_outputopts;
-		/* IP multicast options */
-		struct	ip6_moptions *inp6_moptions;
-		/* ICMPv6 code type filter */
-		struct	icmp6_filter *inp6_icmp6filt;
-		/* IPV6_CHECKSUM setsockopt */
-		int	inp6_cksum;
-		u_short	inp6_ifindex;
-		short	inp6_hops;
-		u_int8_t	inp6_hlim;
-	} inp_depend6;
-	LIST_ENTRY(inpcb) inp_portlist;
-	struct	inpcbport *inp_phd;	/* head of this list */
-	inp_gen_t	inp_gencnt;	/* generation count of this instance */
-#define	in6p_faddr	inp_inc.inc6_faddr
-#define	in6p_laddr	inp_inc.inc6_laddr
-#define	in6p_route	inp_inc.inc6_route
-#define	in6p_ip6_hlim	inp_depend6.inp6_hlim
-#define	in6p_hops	inp_depend6.inp6_hops	/* default hop limit */
-#define	in6p_ip6_nxt	inp_ip_p
-#define	in6p_flowinfo	inp_flow
-#define	in6p_vflag	inp_vflag
-#define	in6p_options	inp_depend6.inp6_options
-#define	in6p_outputopts	inp_depend6.inp6_outputopts
-#define	in6p_moptions	inp_depend6.inp6_moptions
-#define	in6p_icmp6filt	inp_depend6.inp6_icmp6filt
-#define	in6p_cksum	inp_depend6.inp6_cksum
-#define	inp6_ifindex	inp_depend6.inp6_ifindex
-#define	in6p_flags	inp_flags  /* for KAME src sync over BSD*'s */
-#define	in6p_socket	inp_socket  /* for KAME src sync over BSD*'s */
-#define	in6p_lport	inp_lport  /* for KAME src sync over BSD*'s */
-#define	in6p_fport	inp_fport  /* for KAME src sync over BSD*'s */
-#define	in6p_ppcb	inp_ppcb  /* for KAME src sync over BSD*'s */
-};
-/*
- * The range of the generation count, as used in this implementation,
- * is 9e19.  We would have to create 300 billion connections per
- * second for this number to roll over in a year.  This seems sufficiently
- * unlikely that we simply don't concern ourselves with that possibility.
- */
-
-/*
- * Interface exported to userland by various protocols which use
- * inpcbs.  Hack alert -- only define if struct xsocket is in scope.
- */
-#ifdef _SYS_SOCKETVAR_H_
-struct	xinpcb {
-	size_t	xi_len;		/* length of this structure */
-	struct	inpcb xi_inp;
-	struct	xsocket xi_socket;
-	u_quad_t	xi_alignment_hack;
-};
-
-struct	xinpgen {
-	size_t	xig_len;	/* length of this structure */
-	u_int	xig_count;	/* number of PCBs at this time */
-	inp_gen_t xig_gen;	/* generation count at this time */
-	so_gen_t xig_sogen;	/* socket generation count at this time */
-};
-#endif /* _SYS_SOCKETVAR_H_ */
-
-struct inpcbport {
-	LIST_ENTRY(inpcbport) phd_hash;
-	struct inpcbhead phd_pcblist;
-	u_short phd_port;
-};
-
-struct inpcbinfo {		/* XXX documentation, prefixes */
-	struct	inpcbhead *hashbase;
-	u_long	hashmask;
-	struct	inpcbporthead *porthashbase;
-	u_long	porthashmask;
-	struct	inpcbhead *listhead;
-	u_short	lastport;
-	u_short	lastlow;
-	u_short	lasthi;
-	uma_zone_t ipi_zone; /* zone to allocate pcbs from */
-	u_int	ipi_count;	/* number of pcbs in this list */
-	u_quad_t ipi_gencnt;	/* current generation count */
-};
-
-#define INP_PCBHASH(faddr, lport, fport, mask) \
-	(((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport))) & (mask))
-#define INP_PCBPORTHASH(lport, mask) \
-	(ntohs((lport)) & (mask))
-
-/* flags in inp_flags: */
-#define	INP_RECVOPTS		0x01	/* receive incoming IP options */
-#define	INP_RECVRETOPTS		0x02	/* receive IP options for reply */
-#define	INP_RECVDSTADDR		0x04	/* receive IP dst address */
-#define	INP_HDRINCL		0x08	/* user supplies entire IP header */
-#define	INP_HIGHPORT		0x10	/* user wants "high" port binding */
-#define	INP_LOWPORT		0x20	/* user wants "low" port binding */
-#define	INP_ANONPORT		0x40	/* port chosen for user */
-#define	INP_RECVIF		0x80	/* receive incoming interface */
-#define	INP_MTUDISC		0x100	/* user can do MTU discovery */
-#define	INP_FAITH		0x200	/* accept FAITH'ed connections */
-
-#define IN6P_IPV6_V6ONLY	0x008000 /* restrict AF_INET6 socket for v6 */
-
-#define	IN6P_PKTINFO		0x010000 /* receive IP6 dst and I/F */
-#define	IN6P_HOPLIMIT		0x020000 /* receive hoplimit */
-#define	IN6P_HOPOPTS		0x040000 /* receive hop-by-hop options */
-#define	IN6P_DSTOPTS		0x080000 /* receive dst options after rthdr */
-#define	IN6P_RTHDR		0x100000 /* receive routing header */
-#define	IN6P_RTHDRDSTOPTS	0x200000 /* receive dstoptions before rthdr */
-#define IN6P_AUTOFLOWLABEL	0x800000 /* attach flowlabel automatically */
-#define	IN6P_BINDV6ONLY		0x10000000 /* do not grab IPv4 traffic */
-
-#define	INP_CONTROLOPTS		(INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\
-					INP_RECVIF|\
-				 IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
-				 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\
-				 IN6P_AUTOFLOWLABEL)
-#define	INP_UNMAPPABLEOPTS	(IN6P_HOPOPTS|IN6P_DSTOPTS|IN6P_RTHDR|\
-				 IN6P_AUTOFLOWLABEL)
-
- /* for KAME src sync over BSD*'s */
-#define	IN6P_HIGHPORT		INP_HIGHPORT
-#define	IN6P_LOWPORT		INP_LOWPORT
-#define	IN6P_ANONPORT		INP_ANONPORT
-#define	IN6P_RECVIF		INP_RECVIF
-#define	IN6P_MTUDISC		INP_MTUDISC
-#define	IN6P_FAITH		INP_FAITH
-#define	IN6P_CONTROLOPTS INP_CONTROLOPTS
-	/*
-	 * socket AF version is {newer than,or include}
-	 * actual datagram AF version
-	 */
-
-#define	INPLOOKUP_WILDCARD	1
-#define	sotoinpcb(so)	((struct inpcb *)(so)->so_pcb)
-#define	sotoin6pcb(so)	sotoinpcb(so) /* for KAME src sync over BSD*'s */
-
-#define	INP_SOCKAF(so) so->so_proto->pr_domain->dom_family
-
-#define	INP_CHECK_SOCKAF(so, af) 	(INP_SOCKAF(so) == af)
-
-#ifdef _KERNEL
-extern int	ipport_lowfirstauto;
-extern int	ipport_lowlastauto;
-extern int	ipport_firstauto;
-extern int	ipport_lastauto;
-extern int	ipport_hifirstauto;
-extern int	ipport_hilastauto;
-
-void	in_pcbpurgeif0(struct inpcb *, struct ifnet *);
-void	in_losing(struct inpcb *);
-void	in_rtchange(struct inpcb *, int);
-int	in_pcballoc(struct socket *, struct inpcbinfo *, struct thread *);
-int	in_pcbbind(struct inpcb *, struct sockaddr *, struct thread *);
-int	in_pcbconnect(struct inpcb *, struct sockaddr *, struct thread *);
-void	in_pcbdetach(struct inpcb *);
-void	in_pcbdisconnect(struct inpcb *);
-int	in_pcbinshash(struct inpcb *);
-int	in_pcbladdr(struct inpcb *, struct sockaddr *,
-	    struct sockaddr_in **);
-struct inpcb *
-	in_pcblookup_local(struct inpcbinfo *,
-	    struct in_addr, u_int, int);
-struct inpcb *
-	in_pcblookup_hash(struct inpcbinfo *, struct in_addr, u_int,
-	    struct in_addr, u_int, int, struct ifnet *);
-void	in_pcbnotifyall(struct inpcbhead *, struct in_addr,
-	    int, void (*)(struct inpcb *, int));
-void	in_pcbrehash(struct inpcb *);
-int	in_setpeeraddr(struct socket *so, struct sockaddr **nam);
-int	in_setsockaddr(struct socket *so, struct sockaddr **nam);
-void	in_pcbremlists(struct inpcb *inp);
-int	prison_xinpcb(struct thread *td, struct inpcb *inp);
-#endif /* _KERNEL */
-
-#endif /* !_NETINET_IN_PCB_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/in_systm.h b/newlib/libc/sys/linux/include/netinet/in_systm.h
deleted file mode 100644
index 62cea64f1..000000000
--- a/newlib/libc/sys/linux/include/netinet/in_systm.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in_systm.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/in_systm.h,v 1.10 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_IN_SYSTM_H_
-#define _NETINET_IN_SYSTM_H_
-
-/*
- * Miscellaneous internetwork
- * definitions for kernel.
- */
-
-/*
- * Network types.
- *
- * Internally the system keeps counters in the headers with the bytes
- * swapped so that VAX instructions will work on them.  It reverses
- * the bytes before transmission at each protocol level.  The n_ types
- * represent the types with the bytes in ``high-ender'' order.
- */
-typedef u_int16_t n_short;		/* short as received from the net */
-typedef u_int32_t n_long;		/* long as received from the net */
-
-typedef	u_int32_t n_time;		/* ms since 00:00 GMT, byte rev */
-
-#ifdef _KERNEL
-n_time	 iptime(void);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/in_var.h b/newlib/libc/sys/linux/include/netinet/in_var.h
deleted file mode 100644
index ce97b5a11..000000000
--- a/newlib/libc/sys/linux/include/netinet/in_var.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright (c) 1985, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in_var.h	8.2 (Berkeley) 1/9/95
- * $FreeBSD: src/sys/netinet/in_var.h,v 1.45 2002/03/24 10:19:10 bde Exp $
- */
-
-#ifndef _NETINET_IN_VAR_H_
-#define _NETINET_IN_VAR_H_
-
-#include <sys/queue.h>
-#include <sys/fnv_hash.h>
-
-/*
- * Interface address, Internet version.  One of these structures
- * is allocated for each Internet address on an interface.
- * The ifaddr structure contains the protocol-independent part
- * of the structure and is assumed to be first.
- */
-struct in_ifaddr {
-	struct	ifaddr ia_ifa;		/* protocol-independent info */
-#define	ia_ifp		ia_ifa.ifa_ifp
-#define ia_flags	ia_ifa.ifa_flags
-					/* ia_{,sub}net{,mask} in host order */
-	u_long	ia_net;			/* network number of interface */
-	u_long	ia_netmask;		/* mask of net part */
-	u_long	ia_subnet;		/* subnet number, including net */
-	u_long	ia_subnetmask;		/* mask of subnet part */
-	struct	in_addr ia_netbroadcast; /* to recognize net broadcasts */
-	LIST_ENTRY(in_ifaddr) ia_hash;	/* entry in bucket of inet addresses */
-	TAILQ_ENTRY(in_ifaddr) ia_link;	/* list of internet addresses */
-	struct	sockaddr_in ia_addr;	/* reserve space for interface name */
-	struct	sockaddr_in ia_dstaddr; /* reserve space for broadcast addr */
-#define	ia_broadaddr	ia_dstaddr
-	struct	sockaddr_in ia_sockmask; /* reserve space for general netmask */
-};
-
-struct	in_aliasreq {
-	char	ifra_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	struct	sockaddr_in ifra_addr;
-	struct	sockaddr_in ifra_broadaddr;
-#define ifra_dstaddr ifra_broadaddr
-	struct	sockaddr_in ifra_mask;
-};
-/*
- * Given a pointer to an in_ifaddr (ifaddr),
- * return a pointer to the addr as a sockaddr_in.
- */
-#define IA_SIN(ia)    (&(((struct in_ifaddr *)(ia))->ia_addr))
-#define IA_DSTSIN(ia) (&(((struct in_ifaddr *)(ia))->ia_dstaddr))
-
-#define IN_LNAOF(in, ifa) \
-	((ntohl((in).s_addr) & ~((struct in_ifaddr *)(ifa)->ia_subnetmask))
-
-
-#ifdef	_KERNEL
-extern	struct	ifqueue	ipintrq;		/* ip packet input queue */
-extern	struct	in_addr zeroin_addr;
-extern	u_char	inetctlerrmap[];
-
-/* 
- * Hash table for IP addresses.
- */
-extern	LIST_HEAD(in_ifaddrhashhead, in_ifaddr) *in_ifaddrhashtbl;
-extern	TAILQ_HEAD(in_ifaddrhead, in_ifaddr) in_ifaddrhead;
-extern	u_long in_ifaddrhmask;			/* mask for hash table */
-
-#define INADDR_NHASH_LOG2       9
-#define INADDR_NHASH		(1 << INADDR_NHASH_LOG2)
-#define INADDR_HASHVAL(x)	fnv_32_buf((&(x)), sizeof(x), FNV1_32_INIT)
-#define INADDR_HASH(x) \
-	(&in_ifaddrhashtbl[INADDR_HASHVAL(x) & in_ifaddrhmask])
-
-
-/*
- * Macro for finding the interface (ifnet structure) corresponding to one
- * of our IP addresses.
- */
-#define INADDR_TO_IFP(addr, ifp) \
-	/* struct in_addr addr; */ \
-	/* struct ifnet *ifp; */ \
-{ \
-	struct in_ifaddr *ia; \
-\
-	LIST_FOREACH(ia, INADDR_HASH((addr).s_addr), ia_hash) \
-		if (IA_SIN(ia)->sin_addr.s_addr == (addr).s_addr) \
-			break; \
-	(ifp) = (ia == NULL) ? NULL : ia->ia_ifp; \
-}
-
-/*
- * Macro for finding the internet address structure (in_ifaddr) corresponding
- * to a given interface (ifnet structure).
- */
-#define IFP_TO_IA(ifp, ia) \
-	/* struct ifnet *ifp; */ \
-	/* struct in_ifaddr *ia; */ \
-{ \
-	for ((ia) = TAILQ_FIRST(&in_ifaddrhead); \
-	    (ia) != NULL && (ia)->ia_ifp != (ifp); \
-	    (ia) = TAILQ_NEXT((ia), ia_link)) \
-		continue; \
-}
-#endif
-
-/*
- * This information should be part of the ifnet structure but we don't wish
- * to change that - as it might break a number of things
- */
-
-struct router_info {
-	struct ifnet *rti_ifp;
-	int    rti_type; /* type of router which is querier on this interface */
-	int    rti_time; /* # of slow timeouts since last old query */
-	struct router_info *rti_next;
-};
-
-/*
- * Internet multicast address structure.  There is one of these for each IP
- * multicast group to which this host belongs on a given network interface.
- * For every entry on the interface's if_multiaddrs list which represents
- * an IP multicast group, there is one of these structures.  They are also
- * kept on a system-wide list to make it easier to keep our legacy IGMP code
- * compatible with the rest of the world (see IN_FIRST_MULTI et al, below).
- */
-struct in_multi {
-	LIST_ENTRY(in_multi) inm_link;	/* queue macro glue */
-	struct	in_addr inm_addr;	/* IP multicast address, convenience */
-	struct	ifnet *inm_ifp;		/* back pointer to ifnet */
-	struct	ifmultiaddr *inm_ifma;	/* back pointer to ifmultiaddr */
-	u_int	inm_timer;		/* IGMP membership report timer */
-	u_int	inm_state;		/*  state of the membership */
-	struct	router_info *inm_rti;	/* router info*/
-};
-
-#ifdef _KERNEL
-
-#ifdef SYSCTL_DECL
-SYSCTL_DECL(_net_inet_ip);
-SYSCTL_DECL(_net_inet_raw);
-#endif
-
-extern LIST_HEAD(in_multihead, in_multi) in_multihead;
-
-/*
- * Structure used by macros below to remember position when stepping through
- * all of the in_multi records.
- */
-struct in_multistep {
-	struct in_multi *i_inm;
-};
-
-/*
- * Macro for looking up the in_multi record for a given IP multicast address
- * on a given interface.  If no matching record is found, "inm" is set null.
- */
-#define IN_LOOKUP_MULTI(addr, ifp, inm) \
-	/* struct in_addr addr; */ \
-	/* struct ifnet *ifp; */ \
-	/* struct in_multi *inm; */ \
-do { \
-	struct ifmultiaddr *ifma; \
-\
-	TAILQ_FOREACH(ifma, &((ifp)->if_multiaddrs), ifma_link) { \
-		if (ifma->ifma_addr->sa_family == AF_INET \
-		    && ((struct sockaddr_in *)ifma->ifma_addr)->sin_addr.s_addr == \
-		    (addr).s_addr) \
-			break; \
-	} \
-	(inm) = ifma ? ifma->ifma_protospec : 0; \
-} while(0)
-
-/*
- * Macro to step through all of the in_multi records, one at a time.
- * The current position is remembered in "step", which the caller must
- * provide.  IN_FIRST_MULTI(), below, must be called to initialize "step"
- * and get the first record.  Both macros return a NULL "inm" when there
- * are no remaining records.
- */
-#define IN_NEXT_MULTI(step, inm) \
-	/* struct in_multistep  step; */ \
-	/* struct in_multi *inm; */ \
-do { \
-	if (((inm) = (step).i_inm) != NULL) \
-		(step).i_inm = LIST_NEXT((step).i_inm, inm_link); \
-} while(0)
-
-#define IN_FIRST_MULTI(step, inm) \
-	/* struct in_multistep step; */ \
-	/* struct in_multi *inm; */ \
-do { \
-	(step).i_inm = LIST_FIRST(&in_multihead); \
-	IN_NEXT_MULTI((step), (inm)); \
-} while(0)
-
-struct	route;
-struct	in_multi *in_addmulti(struct in_addr *, struct ifnet *);
-void	in_delmulti(struct in_multi *);
-int	in_control(struct socket *, u_long, caddr_t, struct ifnet *,
-	    struct thread *);
-void	in_rtqdrain(void);
-void	ip_input(struct mbuf *);
-int	in_ifadown(struct ifaddr *ifa, int);
-void	in_ifscrub(struct ifnet *, struct in_ifaddr *);
-int	ipflow_fastforward(struct mbuf *);
-void	ipflow_create(const struct route *, struct mbuf *);
-void	ipflow_slowtimo(void);
-
-#endif /* _KERNEL */
-
-/* INET6 stuff */
-#include <netinet6/in6_var.h>
-
-#endif /* _NETINET_IN_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/ip.h b/newlib/libc/sys/linux/include/netinet/ip.h
deleted file mode 100644
index 0e6df1eea..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip.h	8.2 (Berkeley) 6/1/94
- * $FreeBSD: src/sys/netinet/ip.h,v 1.19 2001/12/14 19:37:32 rwatson Exp $
- */
-
-#ifndef _NETINET_IP_H_
-#define _NETINET_IP_H_
-
-/*
- * Definitions for internet protocol version 4.
- * Per RFC 791, September 1981.
- */
-#define	IPVERSION	4
-
-/*
- * Structure of an internet header, naked of options.
- */
-struct ip {
-#ifdef _IP_VHL
-	u_char	ip_vhl;			/* version << 4 | header length >> 2 */
-#else
-#if BYTE_ORDER == LITTLE_ENDIAN
-	u_int	ip_hl:4,		/* header length */
-		ip_v:4;			/* version */
-#endif
-#if BYTE_ORDER == BIG_ENDIAN
-	u_int	ip_v:4,			/* version */
-		ip_hl:4;		/* header length */
-#endif
-#endif /* not _IP_VHL */
-	u_char	ip_tos;			/* type of service */
-	u_short	ip_len;			/* total length */
-	u_short	ip_id;			/* identification */
-	u_short	ip_off;			/* fragment offset field */
-#define	IP_RF 0x8000			/* reserved fragment flag */
-#define	IP_DF 0x4000			/* dont fragment flag */
-#define	IP_MF 0x2000			/* more fragments flag */
-#define	IP_OFFMASK 0x1fff		/* mask for fragmenting bits */
-	u_char	ip_ttl;			/* time to live */
-	u_char	ip_p;			/* protocol */
-	u_short	ip_sum;			/* checksum */
-	struct	in_addr ip_src,ip_dst;	/* source and dest address */
-};
-
-#ifdef _IP_VHL
-#define	IP_MAKE_VHL(v, hl)	((v) << 4 | (hl))
-#define	IP_VHL_HL(vhl)		((vhl) & 0x0f)
-#define	IP_VHL_V(vhl)		((vhl) >> 4)
-#define	IP_VHL_BORING		0x45
-#endif
-
-#define	IP_MAXPACKET	65535		/* maximum packet size */
-
-/*
- * Definitions for IP type of service (ip_tos)
- */
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-/* ECN bits proposed by Sally Floyd */
-#define	IPTOS_CE		0x01	/* congestion experienced */
-#define	IPTOS_ECT		0x02	/* ECN-capable transport */
-
-
-/*
- * Definitions for IP precedence (also in ip_tos) (hopefully unused)
- */
-#define	IPTOS_PREC_NETCONTROL		0xe0
-#define	IPTOS_PREC_INTERNETCONTROL	0xc0
-#define	IPTOS_PREC_CRITIC_ECP		0xa0
-#define	IPTOS_PREC_FLASHOVERRIDE	0x80
-#define	IPTOS_PREC_FLASH		0x60
-#define	IPTOS_PREC_IMMEDIATE		0x40
-#define	IPTOS_PREC_PRIORITY		0x20
-#define	IPTOS_PREC_ROUTINE		0x00
-
-/*
- * Definitions for options.
- */
-#define	IPOPT_COPIED(o)		((o)&0x80)
-#define	IPOPT_CLASS(o)		((o)&0x60)
-#define	IPOPT_NUMBER(o)		((o)&0x1f)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_DEBMEAS		0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define	IPOPT_EOL		0		/* end of option list */
-#define	IPOPT_NOP		1		/* no operation */
-
-#define	IPOPT_RR		7		/* record packet route */
-#define	IPOPT_TS		68		/* timestamp */
-#define	IPOPT_SECURITY		130		/* provide s,c,h,tcc */
-#define	IPOPT_LSRR		131		/* loose source route */
-#define	IPOPT_ESO		133		/* extended security */
-#define	IPOPT_CIPSO		134		/* commerical security */
-#define	IPOPT_SATID		136		/* satnet id */
-#define	IPOPT_SSRR		137		/* strict source route */
-#define	IPOPT_RA		148		/* router alert */
-
-/*
- * Offsets to fields in options other than EOL and NOP.
- */
-#define	IPOPT_OPTVAL		0		/* option ID */
-#define	IPOPT_OLEN		1		/* option length */
-#define IPOPT_OFFSET		2		/* offset within option */
-#define	IPOPT_MINOFF		4		/* min value of above */
-
-/*
- * Time stamp option structure.
- */
-struct	ip_timestamp {
-	u_char	ipt_code;		/* IPOPT_TS */
-	u_char	ipt_len;		/* size of structure (variable) */
-	u_char	ipt_ptr;		/* index of current entry */
-#if BYTE_ORDER == LITTLE_ENDIAN
-	u_int	ipt_flg:4,		/* flags, see below */
-		ipt_oflw:4;		/* overflow counter */
-#endif
-#if BYTE_ORDER == BIG_ENDIAN
-	u_int	ipt_oflw:4,		/* overflow counter */
-		ipt_flg:4;		/* flags, see below */
-#endif
-	union ipt_timestamp {
-		n_long	ipt_time[1];
-		struct	ipt_ta {
-			struct in_addr ipt_addr;
-			n_long ipt_time;
-		} ipt_ta[1];
-	} ipt_timestamp;
-};
-
-/* flag bits for ipt_flg */
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-/* bits for security (not byte swapped) */
-#define	IPOPT_SECUR_UNCLASS	0x0000
-#define	IPOPT_SECUR_CONFID	0xf135
-#define	IPOPT_SECUR_EFTO	0x789a
-#define	IPOPT_SECUR_MMMM	0xbc4d
-#define	IPOPT_SECUR_RESTR	0xaf13
-#define	IPOPT_SECUR_SECRET	0xd788
-#define	IPOPT_SECUR_TOPSECRET	0x6bc5
-
-/*
- * Internet implementation parameters.
- */
-#define	MAXTTL		255		/* maximum time to live (seconds) */
-#define	IPDEFTTL	64		/* default ttl, from RFC 1340 */
-#define	IPFRAGTTL	60		/* time to live for frags, slowhz */
-#define	IPTTLDEC	1		/* subtracted when forwarding */
-
-#define	IP_MSS		576		/* default maximum segment size */
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/ip6.h b/newlib/libc/sys/linux/include/netinet/ip6.h
deleted file mode 100644
index 6c5cbe1d1..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip6.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/*	$FreeBSD: src/sys/netinet/ip6.h,v 1.5 2001/06/11 12:39:00 ume Exp $	*/
-/*	$KAME: ip6.h,v 1.18 2001/03/29 05:34:30 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET_IP6_H_
-#define _NETINET_IP6_H_
-
-/*
- * Definition for internet protocol version 6.
- * RFC 2460
- */
-
-struct ip6_hdr {
-	union {
-		struct ip6_hdrctl {
-			u_int32_t ip6_un1_flow;	/* 20 bits of flow-ID */
-			u_int16_t ip6_un1_plen;	/* payload length */
-			u_int8_t  ip6_un1_nxt;	/* next header */
-			u_int8_t  ip6_un1_hlim;	/* hop limit */
-		} ip6_un1;
-		u_int8_t ip6_un2_vfc;	/* 4 bits version, top 4 bits class */
-	} ip6_ctlun;
-	struct in6_addr ip6_src;	/* source address */
-	struct in6_addr ip6_dst;	/* destination address */
-} __attribute__((__packed__));
-
-#define ip6_vfc		ip6_ctlun.ip6_un2_vfc
-#define ip6_flow	ip6_ctlun.ip6_un1.ip6_un1_flow
-#define ip6_plen	ip6_ctlun.ip6_un1.ip6_un1_plen
-#define ip6_nxt		ip6_ctlun.ip6_un1.ip6_un1_nxt
-#define ip6_hlim	ip6_ctlun.ip6_un1.ip6_un1_hlim
-#define ip6_hops	ip6_ctlun.ip6_un1.ip6_un1_hlim
-
-#define IPV6_VERSION		0x60
-#define IPV6_VERSION_MASK	0xf0
-
-#if BYTE_ORDER == BIG_ENDIAN
-#define IPV6_FLOWINFO_MASK	0x0fffffff	/* flow info (28 bits) */
-#define IPV6_FLOWLABEL_MASK	0x000fffff	/* flow label (20 bits) */
-#else
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define IPV6_FLOWINFO_MASK	0xffffff0f	/* flow info (28 bits) */
-#define IPV6_FLOWLABEL_MASK	0xffff0f00	/* flow label (20 bits) */
-#endif /* LITTLE_ENDIAN */
-#endif
-#if 1
-/* ECN bits proposed by Sally Floyd */
-#define IP6TOS_CE		0x01	/* congestion experienced */
-#define IP6TOS_ECT		0x02	/* ECN-capable transport */
-#endif
-
-/*
- * Extension Headers
- */
-
-struct	ip6_ext {
-	u_int8_t ip6e_nxt;
-	u_int8_t ip6e_len;
-} __attribute__((__packed__));
-
-/* Hop-by-Hop options header */
-/* XXX should we pad it to force alignment on an 8-byte boundary? */
-struct ip6_hbh {
-	u_int8_t ip6h_nxt;	/* next header */
-	u_int8_t ip6h_len;	/* length in units of 8 octets */
-	/* followed by options */
-} __attribute__((__packed__));
-
-/* Destination options header */
-/* XXX should we pad it to force alignment on an 8-byte boundary? */
-struct ip6_dest {
-	u_int8_t ip6d_nxt;	/* next header */
-	u_int8_t ip6d_len;	/* length in units of 8 octets */
-	/* followed by options */
-} __attribute__((__packed__));
-
-/* Option types and related macros */
-#define IP6OPT_PAD1		0x00	/* 00 0 00000 */
-#define IP6OPT_PADN		0x01	/* 00 0 00001 */
-#define IP6OPT_JUMBO		0xC2	/* 11 0 00010 = 194 */
-#define IP6OPT_NSAP_ADDR	0xC3	/* 11 0 00011 */
-#define IP6OPT_TUNNEL_LIMIT	0x04	/* 00 0 00100 */
-#define IP6OPT_RTALERT		0x05	/* 00 0 00101 (KAME definition) */
-
-#define IP6OPT_RTALERT_LEN	4
-#define IP6OPT_RTALERT_MLD	0	/* Datagram contains an MLD message */
-#define IP6OPT_RTALERT_RSVP	1	/* Datagram contains an RSVP message */
-#define IP6OPT_RTALERT_ACTNET	2 	/* contains an Active Networks msg */
-#define IP6OPT_MINLEN		2
-
-#define IP6OPT_BINDING_UPDATE	0xc6	/* 11 0 00110 */
-#define IP6OPT_BINDING_ACK	0x07	/* 00 0 00111 */
-#define IP6OPT_BINDING_REQ	0x08	/* 00 0 01000 */
-#define IP6OPT_HOME_ADDRESS	0xc9	/* 11 0 01001 */
-#define IP6OPT_EID		0x8a	/* 10 0 01010 */
-
-#define IP6OPT_TYPE(o)		((o) & 0xC0)
-#define IP6OPT_TYPE_SKIP	0x00
-#define IP6OPT_TYPE_DISCARD	0x40
-#define IP6OPT_TYPE_FORCEICMP	0x80
-#define IP6OPT_TYPE_ICMP	0xC0
-
-#define IP6OPT_MUTABLE		0x20
-
-#define IP6OPT_JUMBO_LEN	6
-
-/* Routing header */
-struct ip6_rthdr {
-	u_int8_t  ip6r_nxt;	/* next header */
-	u_int8_t  ip6r_len;	/* length in units of 8 octets */
-	u_int8_t  ip6r_type;	/* routing type */
-	u_int8_t  ip6r_segleft;	/* segments left */
-	/* followed by routing type specific data */
-} __attribute__((__packed__));
-
-/* Type 0 Routing header */
-struct ip6_rthdr0 {
-	u_int8_t  ip6r0_nxt;		/* next header */
-	u_int8_t  ip6r0_len;		/* length in units of 8 octets */
-	u_int8_t  ip6r0_type;		/* always zero */
-	u_int8_t  ip6r0_segleft;	/* segments left */
-	u_int8_t  ip6r0_reserved;	/* reserved field */
-	u_int8_t  ip6r0_slmap[3];	/* strict/loose bit map */
-	struct in6_addr  ip6r0_addr[1];	/* up to 23 addresses */
-} __attribute__((__packed__));
-
-/* Fragment header */
-struct ip6_frag {
-	u_int8_t  ip6f_nxt;		/* next header */
-	u_int8_t  ip6f_reserved;	/* reserved field */
-	u_int16_t ip6f_offlg;		/* offset, reserved, and flag */
-	u_int32_t ip6f_ident;		/* identification */
-} __attribute__((__packed__));
-
-#if BYTE_ORDER == BIG_ENDIAN
-#define IP6F_OFF_MASK		0xfff8	/* mask out offset from _offlg */
-#define IP6F_RESERVED_MASK	0x0006	/* reserved bits in ip6f_offlg */
-#define IP6F_MORE_FRAG		0x0001	/* more-fragments flag */
-#else /* BYTE_ORDER == LITTLE_ENDIAN */
-#define IP6F_OFF_MASK		0xf8ff	/* mask out offset from _offlg */
-#define IP6F_RESERVED_MASK	0x0600	/* reserved bits in ip6f_offlg */
-#define IP6F_MORE_FRAG		0x0100	/* more-fragments flag */
-#endif /* BYTE_ORDER == LITTLE_ENDIAN */
-
-/*
- * Internet implementation parameters.
- */
-#define IPV6_MAXHLIM	255	/* maximun hoplimit */
-#define IPV6_DEFHLIM	64	/* default hlim */
-#define IPV6_FRAGTTL	120	/* ttl for fragment packets, in slowtimo tick */
-#define IPV6_HLIMDEC	1	/* subtracted when forwaeding */
-
-#define IPV6_MMTU	1280	/* minimal MTU and reassembly. 1024 + 256 */
-#define IPV6_MAXPACKET	65535	/* ip6 max packet size without Jumbo payload*/
-
-#ifdef _KERNEL
-/*
- * IP6_EXTHDR_CHECK ensures that region between the IP6 header and the
- * target header (including IPv6 itself, extension headers and
- * TCP/UDP/ICMP6 headers) are continuous. KAME requires drivers
- * to store incoming data into one internal mbuf or one or more external
- * mbufs(never into two or more internal mbufs). Thus, the third case is
- * supposed to never be matched but is prepared just in case.
- */
-
-#define IP6_EXTHDR_CHECK(m, off, hlen, ret)				\
-do {									\
-    if ((m)->m_next != NULL) {						\
-	if (((m)->m_flags & M_LOOP) &&					\
-	    ((m)->m_len < (off) + (hlen)) &&				\
-	    (((m) = m_pullup((m), (off) + (hlen))) == NULL)) {		\
-		ip6stat.ip6s_exthdrtoolong++;				\
-		return ret;						\
-	} else if ((m)->m_flags & M_EXT) {				\
-		if ((m)->m_len < (off) + (hlen)) {			\
-			ip6stat.ip6s_exthdrtoolong++;			\
-			m_freem(m);					\
-			return ret;					\
-		}							\
-	} else {							\
-		if ((m)->m_len < (off) + (hlen)) {			\
-			ip6stat.ip6s_exthdrtoolong++;			\
-			m_freem(m);					\
-			return ret;					\
-		}							\
-	}								\
-    } else {								\
-	if ((m)->m_len < (off) + (hlen)) {				\
-		ip6stat.ip6s_tooshort++;				\
-		in6_ifstat_inc(m->m_pkthdr.rcvif, ifs6_in_truncated);	\
-		m_freem(m);						\
-		return ret;						\
-	}								\
-    }									\
-} while (0)
-
-/*
- * IP6_EXTHDR_GET ensures that intermediate protocol header (from "off" to
- * "len") is located in single mbuf, on contiguous memory region.
- * The pointer to the region will be returned to pointer variable "val",
- * with type "typ".
- * IP6_EXTHDR_GET0 does the same, except that it aligns the structure at the
- * very top of mbuf.  GET0 is likely to make memory copy than GET.
- *
- * XXX we're now testing this, needs m_pulldown()
- */
-#define IP6_EXTHDR_GET(val, typ, m, off, len) \
-do {									\
-	struct mbuf *t;							\
-	int tmp;							\
-	if ((m)->m_len >= (off) + (len))				\
-		(val) = (typ)(mtod((m), caddr_t) + (off));		\
-	else {								\
-		t = m_pulldown((m), (off), (len), &tmp);		\
-		if (t) {						\
-			if (t->m_len < tmp + (len))			\
-				panic("m_pulldown malfunction");	\
-			(val) = (typ)(mtod(t, caddr_t) + tmp);		\
-		} else {						\
-			(val) = (typ)NULL;				\
-			(m) = NULL;					\
-		}							\
-	}								\
-} while (0)
-
-#define IP6_EXTHDR_GET0(val, typ, m, off, len) \
-do {									\
-	struct mbuf *t;							\
-	if ((off) == 0)							\
-		(val) = (typ)mtod(m, caddr_t);				\
-	else {								\
-		t = m_pulldown((m), (off), (len), NULL);		\
-		if (t) {						\
-			if (t->m_len < (len))				\
-				panic("m_pulldown malfunction");	\
-			(val) = (typ)mtod(t, caddr_t);			\
-		} else {						\
-			(val) = (typ)NULL;				\
-			(m) = NULL;					\
-		}							\
-	}								\
-} while (0)
-#endif /*_KERNEL*/
-
-#endif /* not _NETINET_IP6_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/ip_dummynet.h b/newlib/libc/sys/linux/include/netinet/ip_dummynet.h
deleted file mode 100644
index 509172f29..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_dummynet.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * Copyright (c) 1998-2002 Luigi Rizzo, Universita` di Pisa
- * Portions Copyright (c) 2000 Akamba Corp.
- * All rights reserved
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/netinet/ip_dummynet.h,v 1.18 2002/05/05 21:27:47 luigi Exp $
- */
-
-#ifndef _IP_DUMMYNET_H
-#define _IP_DUMMYNET_H
-
-/*
- * Definition of dummynet data structures. In the structures, I decided
- * not to use the macros in <sys/queue.h> in the hope of making the code
- * easier to port to other architectures. The type of lists and queue we
- * use here is pretty simple anyways.
- */
-
-/*
- * We start with a heap, which is used in the scheduler to decide when
- * to transmit packets etc.
- *
- * The key for the heap is used for two different values:
- *
- * 1. timer ticks- max 10K/second, so 32 bits are enough;
- *
- * 2. virtual times. These increase in steps of len/x, where len is the
- *    packet length, and x is either the weight of the flow, or the
- *    sum of all weights.
- *    If we limit to max 1000 flows and a max weight of 100, then
- *    x needs 17 bits. The packet size is 16 bits, so we can easily
- *    overflow if we do not allow errors.
- * So we use a key "dn_key" which is 64 bits. Some macros are used to
- * compare key values and handle wraparounds.
- * MAX64 returns the largest of two key values.
- * MY_M is used as a shift count when doing fixed point arithmetic
- * (a better name would be useful...).
- */
-typedef u_int64_t dn_key ;      /* sorting key */
-#define DN_KEY_LT(a,b)     ((int64_t)((a)-(b)) < 0)
-#define DN_KEY_LEQ(a,b)    ((int64_t)((a)-(b)) <= 0)
-#define DN_KEY_GT(a,b)     ((int64_t)((a)-(b)) > 0)
-#define DN_KEY_GEQ(a,b)    ((int64_t)((a)-(b)) >= 0)
-#define MAX64(x,y)  (( (int64_t) ( (y)-(x) )) > 0 ) ? (y) : (x)
-#define MY_M	16 /* number of left shift to obtain a larger precision */
-
-/*
- * XXX With this scaling, max 1000 flows, max weight 100, 1Gbit/s, the
- * virtual time wraps every 15 days.
- */
-
-/*
- * The OFFSET_OF macro is used to return the offset of a field within
- * a structure. It is used by the heap management routines.
- */
-#define OFFSET_OF(type, field) ((int)&( ((type *)0)->field) )
-
-/*
- * A heap entry is made of a key and a pointer to the actual
- * object stored in the heap.
- * The heap is an array of dn_heap_entry entries, dynamically allocated.
- * Current size is "size", with "elements" actually in use.
- * The heap normally supports only ordered insert and extract from the top.
- * If we want to extract an object from the middle of the heap, we
- * have to know where the object itself is located in the heap (or we
- * need to scan the whole array). To this purpose, an object has a
- * field (int) which contains the index of the object itself into the
- * heap. When the object is moved, the field must also be updated.
- * The offset of the index in the object is stored in the 'offset'
- * field in the heap descriptor. The assumption is that this offset
- * is non-zero if we want to support extract from the middle.
- */
-struct dn_heap_entry {
-    dn_key key ;	/* sorting key. Topmost element is smallest one */
-    void *object ;	/* object pointer */
-} ;
-
-struct dn_heap {
-    int size ;
-    int elements ;
-    int offset ; /* XXX if > 0 this is the offset of direct ptr to obj */
-    struct dn_heap_entry *p ;	/* really an array of "size" entries */
-} ;
-
-/*
- * MT_DUMMYNET is a new (fake) mbuf type that is prepended to the
- * packet when it comes out of a pipe. The definition
- * ought to go in /sys/sys/mbuf.h but here it is less intrusive.
- */
-
-#define MT_DUMMYNET MT_CONTROL
-
-/*
- * struct dn_pkt identifies a packet in the dummynet queue. The
- * first part is really an m_hdr for implementation purposes, and some
- * fields are saved there. When passing the packet back to the ip_input/
- * ip_output()/bdg_forward, the struct is prepended to the mbuf chain with type
- * MT_DUMMYNET, and contains the pointer to the matching rule.
- *
- * Note: there is no real need to make this structure contain an m_hdr,
- * in the future this should be changed to a normal data structure.
- */
-struct dn_pkt {
-    struct m_hdr hdr ;
-#define dn_next	hdr.mh_nextpkt	/* next element in queue */
-#define DN_NEXT(x)	(struct dn_pkt *)(x)->dn_next
-#define dn_m	hdr.mh_next	/* packet to be forwarded */
-#define dn_dir	hdr.mh_flags	/* action when pkt extracted from a queue */
-#define DN_TO_IP_OUT	1
-#define DN_TO_IP_IN	2
-#define DN_TO_BDG_FWD	3
-
-    dn_key  output_time;	/* when the pkt is due for delivery	*/
-    struct ifnet *ifp;		/* interface, for ip_output		*/
-    struct sockaddr_in *dn_dst ;
-    struct route ro;		/* route, for ip_output. MUST COPY	*/
-    int flags ;			/* flags, for ip_output (IPv6 ?)	*/
-};
-
-/*
- * Overall structure of dummynet (with WF2Q+):
-
-In dummynet, packets are selected with the firewall rules, and passed
-to two different objects: PIPE or QUEUE.
-
-A QUEUE is just a queue with configurable size and queue management
-policy. It is also associated with a mask (to discriminate among
-different flows), a weight (used to give different shares of the
-bandwidth to different flows) and a "pipe", which essentially
-supplies the transmit clock for all queues associated with that
-pipe.
-
-A PIPE emulates a fixed-bandwidth link, whose bandwidth is
-configurable.  The "clock" for a pipe can come from either an
-internal timer, or from the transmit interrupt of an interface.
-A pipe is also associated with one (or more, if masks are used)
-queue, where all packets for that pipe are stored.
-
-The bandwidth available on the pipe is shared by the queues
-associated with that pipe (only one in case the packet is sent
-to a PIPE) according to the WF2Q+ scheduling algorithm and the
-configured weights.
-
-In general, incoming packets are stored in the appropriate queue,
-which is then placed into one of a few heaps managed by a scheduler
-to decide when the packet should be extracted.
-The scheduler (a function called dummynet()) is run at every timer
-tick, and grabs queues from the head of the heaps when they are
-ready for processing.
-
-There are three data structures definining a pipe and associated queues:
-
- + dn_pipe, which contains the main configuration parameters related
-   to delay and bandwidth;
- + dn_flow_set, which contains WF2Q+ configuration, flow
-   masks, plr and RED configuration;
- + dn_flow_queue, which is the per-flow queue (containing the packets)
-
-Multiple dn_flow_set can be linked to the same pipe, and multiple
-dn_flow_queue can be linked to the same dn_flow_set.
-All data structures are linked in a linear list which is used for
-housekeeping purposes.
-
-During configuration, we create and initialize the dn_flow_set
-and dn_pipe structures (a dn_pipe also contains a dn_flow_set).
-
-At runtime: packets are sent to the appropriate dn_flow_set (either
-WFQ ones, or the one embedded in the dn_pipe for fixed-rate flows),
-which in turn dispatches them to the appropriate dn_flow_queue
-(created dynamically according to the masks).
-
-The transmit clock for fixed rate flows (ready_event()) selects the
-dn_flow_queue to be used to transmit the next packet. For WF2Q,
-wfq_ready_event() extract a pipe which in turn selects the right
-flow using a number of heaps defined into the pipe itself.
-
- *
- */
-
-/*
- * per flow queue. This contains the flow identifier, the queue
- * of packets, counters, and parameters used to support both RED and
- * WF2Q+.
- *
- * A dn_flow_queue is created and initialized whenever a packet for
- * a new flow arrives.
- */
-struct dn_flow_queue {
-    struct dn_flow_queue *next ;
-    struct ipfw_flow_id id ;
-
-    struct dn_pkt *head, *tail ;	/* queue of packets */
-    u_int len ;
-    u_int len_bytes ;
-    long numbytes ;		/* credit for transmission (dynamic queues) */
-
-    u_int64_t tot_pkts ;	/* statistics counters	*/
-    u_int64_t tot_bytes ;
-    u_int32_t drops ;
-
-    int hash_slot ;		/* debugging/diagnostic */
-
-    /* RED parameters */
-    int avg ;                   /* average queue length est. (scaled) */
-    int count ;                 /* arrivals since last RED drop */
-    int random ;                /* random value (scaled) */
-    u_int32_t q_time ;          /* start of queue idle time */
-
-    /* WF2Q+ support */
-    struct dn_flow_set *fs ;	/* parent flow set */
-    int heap_pos ;		/* position (index) of struct in heap */
-    dn_key sched_time ;		/* current time when queue enters ready_heap */
-
-    dn_key S,F ;		/* start time, finish time */
-    /*
-     * Setting F < S means the timestamp is invalid. We only need
-     * to test this when the queue is empty.
-     */
-} ;
-
-/*
- * flow_set descriptor. Contains the "template" parameters for the
- * queue configuration, and pointers to the hash table of dn_flow_queue's.
- *
- * The hash table is an array of lists -- we identify the slot by
- * hashing the flow-id, then scan the list looking for a match.
- * The size of the hash table (buckets) is configurable on a per-queue
- * basis.
- *
- * A dn_flow_set is created whenever a new queue or pipe is created (in the
- * latter case, the structure is located inside the struct dn_pipe).
- */
-struct dn_flow_set {
-    struct dn_flow_set *next; /* next flow set in all_flow_sets list */
-
-    u_short fs_nr ;             /* flow_set number       */
-    u_short flags_fs;
-#define DN_HAVE_FLOW_MASK	0x0001
-#define DN_IS_RED		0x0002
-#define DN_IS_GENTLE_RED	0x0004
-#define DN_QSIZE_IS_BYTES	0x0008	/* queue size is measured in bytes */
-#define DN_IS_PIPE		0x4000
-#define DN_IS_QUEUE		0x8000
-
-    struct dn_pipe *pipe ;	/* pointer to parent pipe */
-    u_short parent_nr ;		/* parent pipe#, 0 if local to a pipe */
-
-    int weight ;		/* WFQ queue weight */
-    int qsize ;			/* queue size in slots or bytes */
-    int plr ;			/* pkt loss rate (2^31-1 means 100%) */
-
-    struct ipfw_flow_id flow_mask ;
-
-    /* hash table of queues onto this flow_set */
-    int rq_size ;		/* number of slots */
-    int rq_elements ;		/* active elements */
-    struct dn_flow_queue **rq;	/* array of rq_size entries */
-
-    u_int32_t last_expired ;	/* do not expire too frequently */
-    int backlogged ;		/* #active queues for this flowset */
-
-        /* RED parameters */
-#define SCALE_RED               16
-#define SCALE(x)                ( (x) << SCALE_RED )
-#define SCALE_VAL(x)            ( (x) >> SCALE_RED )
-#define SCALE_MUL(x,y)          ( ( (x) * (y) ) >> SCALE_RED )
-    int w_q ;			/* queue weight (scaled) */
-    int max_th ;		/* maximum threshold for queue (scaled) */
-    int min_th ;		/* minimum threshold for queue (scaled) */
-    int max_p ;			/* maximum value for p_b (scaled) */
-    u_int c_1 ;			/* max_p/(max_th-min_th) (scaled) */
-    u_int c_2 ;			/* max_p*min_th/(max_th-min_th) (scaled) */
-    u_int c_3 ;			/* for GRED, (1-max_p)/max_th (scaled) */
-    u_int c_4 ;			/* for GRED, 1 - 2*max_p (scaled) */
-    u_int * w_q_lookup ;	/* lookup table for computing (1-w_q)^t */
-    u_int lookup_depth ;	/* depth of lookup table */
-    int lookup_step ;		/* granularity inside the lookup table */
-    int lookup_weight ;		/* equal to (1-w_q)^t / (1-w_q)^(t+1) */
-    int avg_pkt_size ;		/* medium packet size */
-    int max_pkt_size ;		/* max packet size */
-} ;
-
-/*
- * Pipe descriptor. Contains global parameters, delay-line queue,
- * and the flow_set used for fixed-rate queues.
- * 
- * For WF2Q+ support it also has 3 heaps holding dn_flow_queue:
- *   not_eligible_heap, for queues whose start time is higher
- *	than the virtual time. Sorted by start time.
- *   scheduler_heap, for queues eligible for scheduling. Sorted by
- *	finish time.
- *   idle_heap, all flows that are idle and can be removed. We
- *	do that on each tick so we do not slow down too much
- *	operations during forwarding.
- * 
- */
-struct dn_pipe {		/* a pipe */
-    struct dn_pipe *next ;
-
-    int	pipe_nr ;		/* number	*/
-    int bandwidth;		/* really, bytes/tick.	*/
-    int	delay ;			/* really, ticks	*/
-
-    struct	dn_pkt *head, *tail ;	/* packets in delay line */
-
-    /* WF2Q+ */
-    struct dn_heap scheduler_heap ; /* top extract - key Finish time*/
-    struct dn_heap not_eligible_heap; /* top extract- key Start time */
-    struct dn_heap idle_heap ; /* random extract - key Start=Finish time */
-
-    dn_key V ;			/* virtual time */
-    int sum;			/* sum of weights of all active sessions */
-    int numbytes;		/* bits I can transmit (more or less). */
-
-    dn_key sched_time ;		/* time pipe was scheduled in ready_heap */
-
-    /*
-     * When the tx clock come from an interface (if_name[0] != '\0'), its name
-     * is stored below, whereas the ifp is filled when the rule is configured.
-     */
-    char if_name[16];
-    struct ifnet *ifp ;
-    int ready ; /* set if ifp != NULL and we got a signal from it */
-
-    struct dn_flow_set fs ; /* used with fixed-rate flows */
-};
-
-#ifdef _KERNEL
-typedef	int ip_dn_ctl_t(struct sockopt *); /* raw_ip.c */
-typedef	void ip_dn_ruledel_t(void *); /* ip_fw.c */
-typedef	int ip_dn_io_t(int pipe, int dir, struct mbuf *m,
-	struct ifnet *ifp, struct route *ro, struct sockaddr_in * dst,
-	struct ip_fw *rule, int flags); /* ip_{in,out}put.c, bridge.c */
-extern	ip_dn_ctl_t *ip_dn_ctl_ptr;
-extern	ip_dn_ruledel_t *ip_dn_ruledel_ptr;
-extern	ip_dn_io_t *ip_dn_io_ptr;
-#define	DUMMYNET_LOADED	(ip_dn_io_ptr != NULL)
-#endif
-
-#endif /* _IP_DUMMYNET_H */
diff --git a/newlib/libc/sys/linux/include/netinet/ip_ecn.h b/newlib/libc/sys/linux/include/netinet/ip_ecn.h
deleted file mode 100644
index 9f82168b6..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_ecn.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*	$FreeBSD: src/sys/netinet/ip_ecn.h,v 1.5 2002/03/19 21:25:46 alfred Exp $	*/
-/*	$KAME: ip_ecn.h,v 1.6 2001/05/03 14:51:48 itojun Exp $	*/
-
-/*
- * Copyright (C) 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-/*
- * ECN consideration on tunnel ingress/egress operation.
- * http://www.aciri.org/floyd/papers/draft-ipsec-ecn-00.txt
- */
-
-#if defined(_KERNEL) && !defined(_LKM)
-#include "opt_inet.h"
-#endif
-
-#define ECN_ALLOWED	1	/* ECN allowed */
-#define ECN_FORBIDDEN	0	/* ECN forbidden */
-#define ECN_NOCARE	(-1)	/* no consideration to ECN */
-
-#ifdef _KERNEL
-extern void ip_ecn_ingress(int, u_int8_t *, const u_int8_t *);
-extern void ip_ecn_egress(int, const u_int8_t *, u_int8_t *);
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/ip_encap.h b/newlib/libc/sys/linux/include/netinet/ip_encap.h
deleted file mode 100644
index cfc6bca8c..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_encap.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*	$FreeBSD: src/sys/netinet/ip_encap.h,v 1.3 2002/03/19 21:25:46 alfred Exp $	*/
-/*	$KAME: ip_encap.h,v 1.7 2000/03/25 07:23:37 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET_IP_ENCAP_H_
-#define _NETINET_IP_ENCAP_H_
-
-#ifdef _KERNEL
-
-struct encaptab {
-	LIST_ENTRY(encaptab) chain;
-	int af;
-	int proto;			/* -1: don't care, I'll check myself */
-	struct sockaddr_storage src;	/* my addr */
-	struct sockaddr_storage srcmask;
-	struct sockaddr_storage dst;	/* remote addr */
-	struct sockaddr_storage dstmask;
-	int (*func)(const struct mbuf *, int, int, void *);
-	const struct protosw *psw;	/* only pr_input will be used */
-	void *arg;			/* passed via m->m_pkthdr.aux */
-};
-
-void	encap_init(void);
-void	encap4_input(struct mbuf *, int);
-int	encap6_input(struct mbuf **, int *, int);
-const struct encaptab *encap_attach(int, int, const struct sockaddr *,
-	const struct sockaddr *, const struct sockaddr *,
-	const struct sockaddr *, const struct protosw *, void *);
-const struct encaptab *encap_attach_func(int, int,
-	int (*)(const struct mbuf *, int, int, void *),
-	const struct protosw *, void *);
-int	encap_detach(const struct encaptab *);
-void	*encap_getarg(struct mbuf *);
-#endif
-
-#endif /*_NETINET_IP_ENCAP_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet/ip_flow.h b/newlib/libc/sys/linux/include/netinet/ip_flow.h
deleted file mode 100644
index 90561f07b..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_flow.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*-
- * Copyright (c) 1998 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by the 3am Software Foundry ("3am").  It was developed by Matt Thomas.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the NetBSD
- *	Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/netinet/ip_flow.h,v 1.4 2000/05/26 02:05:46 jake Exp $
- */
-
-#ifndef _NETINET_IP_FLOW_H
-#define _NETINET_IP_FLOW_H
-
-struct ipflow {
-	LIST_ENTRY(ipflow) ipf_next;	/* next ipflow in bucket */
-	struct in_addr ipf_dst;		/* destination address */
-	struct in_addr ipf_src;		/* source address */
-
-	u_int8_t ipf_tos;		/* type-of-service */
-	struct route ipf_ro;		/* associated route entry */
-	u_long ipf_uses;		/* number of uses in this period */
-
-	int ipf_timer;			/* remaining lifetime of this entry */
-	u_long ipf_dropped;		/* ENOBUFS returned by if_output */
-	u_long ipf_errors;		/* other errors returned by if_output */
-	u_long ipf_last_uses;		/* number of uses in last period */
-};
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/ip_fw.h b/newlib/libc/sys/linux/include/netinet/ip_fw.h
deleted file mode 100644
index 3c2b1c743..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_fw.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (c) 1993 Daniel Boulet
- * Copyright (c) 1994 Ugen J.S.Antsilevich
- *
- * Redistribution and use in source forms, with and without modification,
- * are permitted provided that this entire comment appears intact.
- *
- * Redistribution in binary form may occur without any restrictions.
- * Obviously, it would be nice if you gave credit where credit is due
- * but requiring it would be too onerous.
- *
- * This software is provided ``AS IS'' without any warranties of any kind.
- *
- * $FreeBSD: src/sys/netinet/ip_fw.h,v 1.66 2002/05/09 10:34:57 luigi Exp $
- */
-
-#ifndef _IP_FW_H
-#define _IP_FW_H
-
-#include <sys/queue.h>
-
-/*
- * This union structure identifies an interface, either explicitly
- * by name or implicitly by IP address. The flags IP_FW_F_IIFNAME
- * and IP_FW_F_OIFNAME say how to interpret this structure. An
- * interface unit number of -1 matches any unit number, while an
- * IP address of 0.0.0.0 indicates matches any interface.
- *
- * The receive and transmit interfaces are only compared against the
- * the packet if the corresponding bit (IP_FW_F_IIFACE or IP_FW_F_OIFACE)
- * is set. Note some packets lack a receive or transmit interface
- * (in which case the missing "interface" never matches).
- */
-
-union ip_fw_if {
-	struct in_addr	fu_via_ip;	/* Specified by IP address */
-	struct {			/* Specified by interface name */
-#define FW_IFNLEN	10		/* need room ! was IFNAMSIZ */
-		char	name[FW_IFNLEN];
-		short	unit;		/* -1 means match any unit */
-	} fu_via_if;
-};
-
-/*
- * Format of an IP firewall descriptor
- *
- * fw_src, fw_dst, fw_smsk, fw_dmsk are always stored in network byte order.
- * fw_flg and fw_n*p are stored in host byte order (of course).
- * Port numbers are stored in HOST byte order.
- */
-
-/*
- * To match MAC headers:
- *     12 bytes at fw_mac_hdr contain the dst-src MAC address after masking.
- *     12 bytes at fw_mac_mask contain the mask to apply to dst-src
- *     2 bytes at fw_mac_type contain the mac type after mask (in net format)
- *     2 bytes at fw_mac_type_mask contain the mac type mask
- *         If IP_FW_F_SRNG, the two contain the low-high of a range of types.
- *     IP_FW_F_DRNG is used to indicare we want to match a vlan.
- */
-#define	fw_mac_hdr		fw_src
-#define	fw_mac_mask		fw_uar
-#define	fw_mac_type		fw_iplen
-#define	fw_mac_mask_type	fw_ipid
-
-struct ip_fw {
-	LIST_ENTRY(ip_fw) next;		/* bidirectional list of rules */
-	u_int		fw_flg;		/* Operational Flags word */
-	u_int64_t	fw_pcnt;	/* Packet counters */
-	u_int64_t	fw_bcnt;	/* Byte counters */
-
-	struct in_addr	fw_src;		/* Source IP address */
-	struct in_addr	fw_dst;		/* Destination IP address */
-	struct in_addr	fw_smsk;	/* Mask for source IP address */
-	struct in_addr	fw_dmsk;	/* Mask for destination address */
-	u_short		fw_number;	/* Rule number */
-	u_char		fw_prot;	/* IP protocol */
-#if 1
-	u_char		fw_nports;	/* # of src/dst port in array */
-#define	IP_FW_GETNSRCP(rule)		((rule)->fw_nports & 0x0f)
-#define	IP_FW_SETNSRCP(rule, n)		do {				\
-					    (rule)->fw_nports &= ~0x0f;	\
-					    (rule)->fw_nports |= (n);	\
-					} while (0)
-#define	IP_FW_GETNDSTP(rule)		((rule)->fw_nports >> 4)
-#define	IP_FW_SETNDSTP(rule, n)		do {				  \
-					    (rule)->fw_nports &= ~0xf0;	  \
-					    (rule)->fw_nports |= (n) << 4;\
-					} while (0)
-#define	IP_FW_HAVEPORTS(rule)		((rule)->fw_nports != 0)
-#else
-	u_char		__pad[1];
-	u_int		_nsrcp;
-	u_int		_ndstp;
-#define	IP_FW_GETNSRCP(rule)		(rule)->_nsrcp
-#define	IP_FW_SETNSRCP(rule,n)		(rule)->_nsrcp = n
-#define	IP_FW_GETNDSTP(rule)		(rule)->_ndstp
-#define	IP_FW_SETNDSTP(rule,n)		(rule)->_ndstp = n
-#define	IP_FW_HAVEPORTS(rule)		((rule)->_ndstp + (rule)->_nsrcp != 0)
-#endif
-#define	IP_FW_MAX_PORTS	10		/* A reasonable maximum */
-    union {
-	u_short		fw_pts[IP_FW_MAX_PORTS]; /* port numbers to match */
-#define	IP_FW_ICMPTYPES_MAX	128
-#define	IP_FW_ICMPTYPES_DIM	(IP_FW_ICMPTYPES_MAX / (sizeof(unsigned) * 8))
-	unsigned	fw_icmptypes[IP_FW_ICMPTYPES_DIM]; /*ICMP types bitmap*/
-    } fw_uar;
-
-	u_int		fw_ipflg;	/* IP flags word */
-	u_short		fw_iplen;	/* IP length */
-	u_short		fw_ipid;	/* Identification */
-	u_char		fw_ipopt;	/* IP options set */
-	u_char		fw_ipnopt;	/* IP options unset */
-	u_char		fw_iptos;	/* IP type of service set */
-	u_char		fw_ipntos;	/* IP type of service unset */
-	u_char		fw_ipttl;	/* IP time to live */
-	u_int		fw_ipver:4;	/* IP version */
-	u_char		fw_tcpopt;	/* TCP options set */
-	u_char		fw_tcpnopt;	/* TCP options unset */
-	u_char		fw_tcpf;	/* TCP flags set */
-	u_char		fw_tcpnf;	/* TCP flags unset */
-	u_short		fw_tcpwin;	/* TCP window size */
-	u_int32_t	fw_tcpseq;	/* TCP sequence */
-	u_int32_t	fw_tcpack;	/* TCP acknowledgement */
-	long		timestamp;	/* timestamp (tv_sec) of last match */
-	union ip_fw_if	fw_in_if;	/* Incoming interfaces */
-	union ip_fw_if	fw_out_if;	/* Outgoing interfaces */
-    union {
-	u_short		fu_divert_port;	/* Divert/tee port (options IPDIVERT) */
-	u_short		fu_pipe_nr;	/* queue number (option DUMMYNET) */
-	u_short		fu_skipto_rule;	/* SKIPTO command rule number */
-	u_short		fu_reject_code;	/* REJECT response code */
-	struct sockaddr_in fu_fwd_ip;
-    } fw_un;
-	void		*pipe_ptr;	/* flow_set ptr for dummynet pipe */
-	void		*next_rule_ptr;	/* next rule in case of match */
-	uid_t		fw_uid;		/* uid to match */
-	gid_t		fw_gid;		/* gid to match */
-	int		fw_logamount;	/* amount to log */
-	u_int64_t	fw_loghighest;	/* highest number packet to log */
-
-	long		dont_match_prob; /* 0x7fffffff means 1.0, always fail */
-	u_char		dyn_type;	/* type for dynamic rule */
-
-#define	DYN_KEEP_STATE	0	/* type for keep-state rules	*/
-#define	DYN_LIMIT	1	/* type for limit connection rules */
-#define	DYN_LIMIT_PARENT 2	/* parent entry for limit connection rules */
-
-	/* following two fields are used to limit number of connections
-	 * basing on either src, srcport, dst, dstport.
-	 */
-	u_char		limit_mask;	/* mask type for limit rule, can
-					 * have many.
-					 */
-#define	DYN_SRC_ADDR	0x1
-#define	DYN_SRC_PORT	0x2
-#define	DYN_DST_ADDR	0x4
-#define	DYN_DST_PORT	0x8
-
-	u_short		conn_limit;	/* # of connections for limit rule */
-};
-
-#define	fw_divert_port	fw_un.fu_divert_port
-#define	fw_skipto_rule	fw_un.fu_skipto_rule
-#define	fw_reject_code	fw_un.fu_reject_code
-#define	fw_pipe_nr	fw_un.fu_pipe_nr
-#define	fw_fwd_ip	fw_un.fu_fwd_ip
-
-/*
- *
- *   rule_ptr  -------------+
- *                          V
- *     [ next.le_next ]---->[ next.le_next ]---- [ next.le_next ]--->
- *     [ next.le_prev ]<----[ next.le_prev ]<----[ next.le_prev ]<---
- *     [ <ip_fw> body ]     [ <ip_fw> body ]     [ <ip_fw> body ]
- *
- */
-
-/*
- * Flow mask/flow id for each queue.
- */
-struct ipfw_flow_id {
-	u_int32_t	dst_ip;
-	u_int32_t	src_ip;
-	u_int16_t	dst_port;
-	u_int16_t	src_port;
-	u_int8_t	proto;
-	u_int8_t	flags;	/* protocol-specific flags */
-};
-
-/*
- * dynamic ipfw rule
- */
-struct ipfw_dyn_rule {
-	struct ipfw_dyn_rule *next;
-	struct ipfw_flow_id id;		/* (masked) flow id */
-	struct ip_fw	*rule;		/* pointer to rule */
-	struct ipfw_dyn_rule *parent;	/* pointer to parent rule */
-	u_int32_t	expire;		/* expire time */
-	u_int64_t	pcnt;		/* packet match counters */
-	u_int64_t	bcnt;		/* byte match counters */
-	u_int32_t	bucket;		/* which bucket in hash table */
-	u_int32_t	state;		/* state of this rule (typically a
-					 * combination of TCP flags)
-					 */
-	u_int16_t	dyn_type;	/* rule type */
-	u_int16_t	count;		/* refcount */
-};
-
-/*
- * Values for "flags" field .
- */
-#define	IP_FW_F_COMMAND	0x000000ff	/* Mask for type of chain entry: */
-#define	IP_FW_F_DENY	0x00000000	/* This is a deny rule */
-#define	IP_FW_F_REJECT	0x00000001	/* Deny and send a response packet */
-#define	IP_FW_F_ACCEPT	0x00000002	/* This is an accept rule */
-#define	IP_FW_F_COUNT	0x00000003	/* This is a count rule */
-#define	IP_FW_F_DIVERT	0x00000004	/* This is a divert rule */
-#define	IP_FW_F_TEE	0x00000005	/* This is a tee rule */
-#define	IP_FW_F_SKIPTO	0x00000006	/* This is a skipto rule */
-#define	IP_FW_F_FWD	0x00000007	/* This is a "change forwarding
-					 * address" rule
-					 */
-#define	IP_FW_F_PIPE	0x00000008	/* This is a dummynet rule */
-#define	IP_FW_F_QUEUE	0x00000009	/* This is a dummynet queue */
-
-#define	IP_FW_F_IN	0x00000100	/* Check inbound packets */
-#define	IP_FW_F_OUT	0x00000200	/* Check outbound packets */
-#define	IP_FW_F_IIFACE	0x00000400	/* Apply inbound interface test */
-#define	IP_FW_F_OIFACE	0x00000800	/* Apply outbound interface test */
-#define	IP_FW_F_PRN	0x00001000	/* Print if this rule matches */
-#define	IP_FW_F_SRNG	0x00002000	/* The first two src ports are a min
-					 * and max range (stored in host byte
-					 * order).
-					 */
-#define	IP_FW_F_DRNG	0x00004000	/* The first two dst ports are a min
-					 * and max range (stored in host byte
-					 * order).
-					 */
-#define	IP_FW_F_FRAG	0x00008000	/* Fragment */
-#define	IP_FW_F_IIFNAME	0x00010000	/* In interface by name/unit (not IP) */
-#define	IP_FW_F_OIFNAME	0x00020000	/* Out interface by name/unit (not IP)*/
-#define	IP_FW_F_INVSRC	0x00040000	/* Invert sense of src check */
-#define	IP_FW_F_INVDST	0x00080000	/* Invert sense of dst check */
-#define	IP_FW_F_ICMPBIT	0x00100000	/* ICMP type bitmap is valid */
-#define	IP_FW_F_UID	0x00200000	/* filter by uid */
-#define	IP_FW_F_GID	0x00400000	/* filter by gid */
-#define	IP_FW_F_RND_MATCH 0x00800000	/* probabilistic rule match */
-#define	IP_FW_F_SMSK	0x01000000	/* src-port + mask */
-#define	IP_FW_F_DMSK	0x02000000	/* dst-port + mask */
-#define	IP_FW_BRIDGED	0x04000000	/* only match bridged packets */
-#define	IP_FW_F_KEEP_S	0x08000000	/* keep state */
-#define	IP_FW_F_CHECK_S	0x10000000	/* check state */
-#define	IP_FW_F_SME	0x20000000	/* source = me */
-#define	IP_FW_F_DME	0x40000000	/* destination = me */
-#define	IP_FW_F_MAC	0x80000000	/* match MAC header */
-
-#define	IP_FW_F_MASK	0xFFFFFFFF	/* All possible flag bits mask */
-
-/*
- * Flags for the 'fw_ipflg' field, for comparing values
- * of ip and its protocols.
- */
-#define	IP_FW_IF_TCPOPT	0x00000001	/* tcp options */
-#define	IP_FW_IF_TCPFLG	0x00000002	/* tcp flags */
-#define	IP_FW_IF_TCPSEQ	0x00000004	/* tcp sequence number */
-#define	IP_FW_IF_TCPACK	0x00000008	/* tcp acknowledgement number */
-#define	IP_FW_IF_TCPWIN	0x00000010	/* tcp window size */
-#define	IP_FW_IF_TCPEST	0x00000020	/* established TCP connection */
-#define	IP_FW_IF_TCPMSK	0x0000003f	/* mask of all tcp values */
-#define	IP_FW_IF_IPOPT	0x00000100	/* ip options */
-#define	IP_FW_IF_IPLEN	0x00000200	/* ip length */
-#define	IP_FW_IF_IPID	0x00000400	/* ip identification */
-#define	IP_FW_IF_IPTOS	0x00000800	/* ip type of service */
-#define	IP_FW_IF_IPTTL	0x00001000	/* ip time to live */
-#define	IP_FW_IF_IPVER	0x00002000	/* ip version */
-#define	IP_FW_IF_IPPRE	0x00004000	/* ip precedence */
-#define	IP_FW_IF_IPMSK	0x00007f00	/* mask of all ip values */
-#define	IP_FW_IF_MSK	0x0000ffff	/* All possible bits mask */
-
-/*
- * For backwards compatibility with rules specifying "via iface" but
- * not restricted to only "in" or "out" packets, we define this combination
- * of bits to represent this configuration.
- */
-
-#define	IF_FW_F_VIAHACK	(IP_FW_F_IN|IP_FW_F_OUT|IP_FW_F_IIFACE|IP_FW_F_OIFACE)
-
-/*
- * Definitions for REJECT response codes.
- * Values less than 256 correspond to ICMP unreachable codes.
- */
-#define	IP_FW_REJECT_RST	0x0100	/* TCP packets: send RST */
-
-/*
- * Definitions for IP option names.
- */
-#define	IP_FW_IPOPT_LSRR	0x01
-#define	IP_FW_IPOPT_SSRR	0x02
-#define	IP_FW_IPOPT_RR		0x04
-#define	IP_FW_IPOPT_TS		0x08
-
-/*
- * Definitions for TCP option names.
- */
-#define	IP_FW_TCPOPT_MSS	0x01
-#define	IP_FW_TCPOPT_WINDOW	0x02
-#define	IP_FW_TCPOPT_SACK	0x04
-#define	IP_FW_TCPOPT_TS		0x08
-#define	IP_FW_TCPOPT_CC		0x10
-
-/*
- * Definitions for TCP flags.
- */
-#define	IP_FW_TCPF_FIN		TH_FIN
-#define	IP_FW_TCPF_SYN		TH_SYN
-#define	IP_FW_TCPF_RST		TH_RST
-#define	IP_FW_TCPF_PSH		TH_PUSH
-#define	IP_FW_TCPF_ACK		TH_ACK
-#define	IP_FW_TCPF_URG		TH_URG
-
-/*
- * Main firewall chains definitions and global var's definitions.
- */
-#ifdef _KERNEL
-
-#define	IP_FW_PORT_DYNT_FLAG	0x10000
-#define	IP_FW_PORT_TEE_FLAG	0x20000
-#define	IP_FW_PORT_DENY_FLAG	0x40000
-
-/*
- * Function definitions.
- */
-void ip_fw_init(void);
-
-/* Firewall hooks */
-struct ip;
-struct sockopt;
-typedef int ip_fw_chk_t (struct mbuf **m, struct ifnet *oif,
-    u_int16_t *cookie, struct ip_fw **rule, struct sockaddr_in **next_hop);
-typedef int ip_fw_ctl_t (struct sockopt *);
-extern ip_fw_chk_t *ip_fw_chk_ptr;
-extern ip_fw_ctl_t *ip_fw_ctl_ptr;
-extern int fw_one_pass;
-extern int fw_enable;
-extern struct ipfw_flow_id last_pkt;
-#define	IPFW_LOADED	(ip_fw_chk_ptr != NULL)
-#endif /* _KERNEL */
-
-#endif /* _IP_FW_H */
diff --git a/newlib/libc/sys/linux/include/netinet/ip_icmp.h b/newlib/libc/sys/linux/include/netinet/ip_icmp.h
deleted file mode 100644
index 2574d07dc..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_icmp.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip_icmp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/ip_icmp.h,v 1.18 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_IP_ICMP_H_
-#define _NETINET_IP_ICMP_H_
-
-/*
- * Interface Control Message Protocol Definitions.
- * Per RFC 792, September 1981.
- */
-
-/*
- * Internal of an ICMP Router Advertisement
- */
-struct icmp_ra_addr {
-	u_int32_t ira_addr;
-	u_int32_t ira_preference;
-};
-
-/*
- * Structure of an icmp header.
- */
-struct icmp {
-	u_char	icmp_type;		/* type of message, see below */
-	u_char	icmp_code;		/* type sub code */
-	u_short	icmp_cksum;		/* ones complement cksum of struct */
-	union {
-		u_char ih_pptr;			/* ICMP_PARAMPROB */
-		struct in_addr ih_gwaddr;	/* ICMP_REDIRECT */
-		struct ih_idseq {
-			n_short	icd_id;
-			n_short	icd_seq;
-		} ih_idseq;
-		int ih_void;
-
-		/* ICMP_UNREACH_NEEDFRAG -- Path MTU Discovery (RFC1191) */
-		struct ih_pmtu {
-			n_short ipm_void;
-			n_short ipm_nextmtu;
-		} ih_pmtu;
-
-		struct ih_rtradv {
-			u_char irt_num_addrs;
-			u_char irt_wpa;
-			u_int16_t irt_lifetime;
-		} ih_rtradv;
-	} icmp_hun;
-#define	icmp_pptr	icmp_hun.ih_pptr
-#define	icmp_gwaddr	icmp_hun.ih_gwaddr
-#define	icmp_id		icmp_hun.ih_idseq.icd_id
-#define	icmp_seq	icmp_hun.ih_idseq.icd_seq
-#define	icmp_void	icmp_hun.ih_void
-#define	icmp_pmvoid	icmp_hun.ih_pmtu.ipm_void
-#define	icmp_nextmtu	icmp_hun.ih_pmtu.ipm_nextmtu
-#define	icmp_num_addrs	icmp_hun.ih_rtradv.irt_num_addrs
-#define	icmp_wpa	icmp_hun.ih_rtradv.irt_wpa
-#define	icmp_lifetime	icmp_hun.ih_rtradv.irt_lifetime
-	union {
-		struct id_ts {
-			n_time its_otime;
-			n_time its_rtime;
-			n_time its_ttime;
-		} id_ts;
-		struct id_ip  {
-			struct ip idi_ip;
-			/* options and then 64 bits of data */
-		} id_ip;
-		struct icmp_ra_addr id_radv;
-		u_int32_t id_mask;
-		char	id_data[1];
-	} icmp_dun;
-#define	icmp_otime	icmp_dun.id_ts.its_otime
-#define	icmp_rtime	icmp_dun.id_ts.its_rtime
-#define	icmp_ttime	icmp_dun.id_ts.its_ttime
-#define	icmp_ip		icmp_dun.id_ip.idi_ip
-#define	icmp_radv	icmp_dun.id_radv
-#define	icmp_mask	icmp_dun.id_mask
-#define	icmp_data	icmp_dun.id_data
-};
-
-/*
- * Lower bounds on packet lengths for various types.
- * For the error advice packets must first insure that the
- * packet is large enough to contain the returned ip header.
- * Only then can we do the check to see if 64 bits of packet
- * data have been returned, since we need to check the returned
- * ip header length.
- */
-#define	ICMP_MINLEN	8				/* abs minimum */
-#define	ICMP_TSLEN	(8 + 3 * sizeof (n_time))	/* timestamp */
-#define	ICMP_MASKLEN	12				/* address mask */
-#define	ICMP_ADVLENMIN	(8 + sizeof (struct ip) + 8)	/* min */
-#ifndef _IP_VHL
-#define	ICMP_ADVLEN(p)	(8 + ((p)->icmp_ip.ip_hl << 2) + 8)
-	/* N.B.: must separately check that ip_hl >= 5 */
-#else
-#define	ICMP_ADVLEN(p)	(8 + (IP_VHL_HL((p)->icmp_ip.ip_vhl) << 2) + 8)
-	/* N.B.: must separately check that header length >= 5 */
-#endif
-
-/*
- * Definition of type and code field values.
- */
-#define	ICMP_ECHOREPLY		0		/* echo reply */
-#define	ICMP_UNREACH		3		/* dest unreachable, codes: */
-#define		ICMP_UNREACH_NET	0		/* bad net */
-#define		ICMP_UNREACH_HOST	1		/* bad host */
-#define		ICMP_UNREACH_PROTOCOL	2		/* bad protocol */
-#define		ICMP_UNREACH_PORT	3		/* bad port */
-#define		ICMP_UNREACH_NEEDFRAG	4		/* IP_DF caused drop */
-#define		ICMP_UNREACH_SRCFAIL	5		/* src route failed */
-#define		ICMP_UNREACH_NET_UNKNOWN 6		/* unknown net */
-#define		ICMP_UNREACH_HOST_UNKNOWN 7		/* unknown host */
-#define		ICMP_UNREACH_ISOLATED	8		/* src host isolated */
-#define		ICMP_UNREACH_NET_PROHIB	9		/* prohibited access */
-#define		ICMP_UNREACH_HOST_PROHIB 10		/* ditto */
-#define		ICMP_UNREACH_TOSNET	11		/* bad tos for net */
-#define		ICMP_UNREACH_TOSHOST	12		/* bad tos for host */
-#define		ICMP_UNREACH_FILTER_PROHIB 13		/* admin prohib */
-#define		ICMP_UNREACH_HOST_PRECEDENCE 14		/* host prec vio. */
-#define		ICMP_UNREACH_PRECEDENCE_CUTOFF 15	/* prec cutoff */
-#define	ICMP_SOURCEQUENCH	4		/* packet lost, slow down */
-#define	ICMP_REDIRECT		5		/* shorter route, codes: */
-#define		ICMP_REDIRECT_NET	0		/* for network */
-#define		ICMP_REDIRECT_HOST	1		/* for host */
-#define		ICMP_REDIRECT_TOSNET	2		/* for tos and net */
-#define		ICMP_REDIRECT_TOSHOST	3		/* for tos and host */
-#define	ICMP_ECHO		8		/* echo service */
-#define	ICMP_ROUTERADVERT	9		/* router advertisement */
-#define	ICMP_ROUTERSOLICIT	10		/* router solicitation */
-#define	ICMP_TIMXCEED		11		/* time exceeded, code: */
-#define		ICMP_TIMXCEED_INTRANS	0		/* ttl==0 in transit */
-#define		ICMP_TIMXCEED_REASS	1		/* ttl==0 in reass */
-#define	ICMP_PARAMPROB		12		/* ip header bad */
-#define		ICMP_PARAMPROB_ERRATPTR 0		/* error at param ptr */
-#define		ICMP_PARAMPROB_OPTABSENT 1		/* req. opt. absent */
-#define		ICMP_PARAMPROB_LENGTH 2			/* bad length */
-#define	ICMP_TSTAMP		13		/* timestamp request */
-#define	ICMP_TSTAMPREPLY	14		/* timestamp reply */
-#define	ICMP_IREQ		15		/* information request */
-#define	ICMP_IREQREPLY		16		/* information reply */
-#define	ICMP_MASKREQ		17		/* address mask request */
-#define	ICMP_MASKREPLY		18		/* address mask reply */
-
-#define	ICMP_MAXTYPE		18
-
-#define	ICMP_INFOTYPE(type) \
-	((type) == ICMP_ECHOREPLY || (type) == ICMP_ECHO || \
-	(type) == ICMP_ROUTERADVERT || (type) == ICMP_ROUTERSOLICIT || \
-	(type) == ICMP_TSTAMP || (type) == ICMP_TSTAMPREPLY || \
-	(type) == ICMP_IREQ || (type) == ICMP_IREQREPLY || \
-	(type) == ICMP_MASKREQ || (type) == ICMP_MASKREPLY)
-
-#ifdef _KERNEL
-void	icmp_error(struct mbuf *, int, int, n_long, struct ifnet *);
-void	icmp_input(struct mbuf *, int);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/ip_mroute.h b/newlib/libc/sys/linux/include/netinet/ip_mroute.h
deleted file mode 100644
index 555ff4783..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_mroute.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (c) 1989 Stephen Deering.
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Stephen Deering of Stanford University.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip_mroute.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/ip_mroute.h,v 1.19 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_IP_MROUTE_H_
-#define _NETINET_IP_MROUTE_H_
-
-/*
- * Definitions for IP multicast forwarding.
- *
- * Written by David Waitzman, BBN Labs, August 1988.
- * Modified by Steve Deering, Stanford, February 1989.
- * Modified by Ajit Thyagarajan, PARC, August 1993.
- * Modified by Ajit Thyagarajan, PARC, August 1994.
- *
- * MROUTING Revision: 3.3.1.3
- */
-
-
-/*
- * Multicast Routing set/getsockopt commands.
- */
-#define	MRT_INIT	100	/* initialize forwarder */
-#define	MRT_DONE	101	/* shut down forwarder */
-#define	MRT_ADD_VIF	102	/* create virtual interface */
-#define	MRT_DEL_VIF	103	/* delete virtual interface */
-#define MRT_ADD_MFC	104	/* insert forwarding cache entry */
-#define MRT_DEL_MFC	105	/* delete forwarding cache entry */
-#define MRT_VERSION	106	/* get kernel version number */
-#define MRT_ASSERT      107     /* enable PIM assert processing */
-
-
-#define GET_TIME(t)	microtime(&t)
-
-/*
- * Types and macros for handling bitmaps with one bit per virtual interface.
- */
-#define	MAXVIFS 32
-typedef u_long vifbitmap_t;
-typedef u_short vifi_t;		/* type of a vif index */
-#define ALL_VIFS (vifi_t)-1
-
-#define	VIFM_SET(n, m)		((m) |= (1 << (n)))
-#define	VIFM_CLR(n, m)		((m) &= ~(1 << (n)))
-#define	VIFM_ISSET(n, m)	((m) & (1 << (n)))
-#define	VIFM_CLRALL(m)		((m) = 0x00000000)
-#define	VIFM_COPY(mfrom, mto)	((mto) = (mfrom))
-#define	VIFM_SAME(m1, m2)	((m1) == (m2))
-
-
-/*
- * Argument structure for MRT_ADD_VIF.
- * (MRT_DEL_VIF takes a single vifi_t argument.)
- */
-struct vifctl {
-	vifi_t	vifc_vifi;	    	/* the index of the vif to be added */
-	u_char	vifc_flags;     	/* VIFF_ flags defined below */
-	u_char	vifc_threshold; 	/* min ttl required to forward on vif */
-	u_int	vifc_rate_limit;	/* max rate */
-	struct	in_addr vifc_lcl_addr;	/* local interface address */
-	struct	in_addr vifc_rmt_addr;	/* remote address (tunnels only) */
-};
-
-#define	VIFF_TUNNEL	0x1		/* vif represents a tunnel end-point */
-#define VIFF_SRCRT	0x2		/* tunnel uses IP source routing */
-
-/*
- * Argument structure for MRT_ADD_MFC and MRT_DEL_MFC
- * (mfcc_tos to be added at a future point)
- */
-struct mfcctl {
-    struct in_addr  mfcc_origin;		/* ip origin of mcasts       */
-    struct in_addr  mfcc_mcastgrp; 		/* multicast group associated*/
-    vifi_t	    mfcc_parent;   		/* incoming vif              */
-    u_char	    mfcc_ttls[MAXVIFS]; 	/* forwarding ttls on vifs   */
-};
-
-/*
- * The kernel's multicast routing statistics.
- */
-struct mrtstat {
-    u_long	mrts_mfc_lookups;	/* # forw. cache hash table hits   */
-    u_long	mrts_mfc_misses;	/* # forw. cache hash table misses */
-    u_long	mrts_upcalls;		/* # calls to mrouted              */
-    u_long	mrts_no_route;		/* no route for packet's origin    */
-    u_long	mrts_bad_tunnel;	/* malformed tunnel options        */
-    u_long	mrts_cant_tunnel;	/* no room for tunnel options      */
-    u_long	mrts_wrong_if;		/* arrived on wrong interface	   */
-    u_long	mrts_upq_ovflw;		/* upcall Q overflow		   */
-    u_long	mrts_cache_cleanups;	/* # entries with no upcalls 	   */
-    u_long  	mrts_drop_sel;     	/* pkts dropped selectively        */
-    u_long  	mrts_q_overflow;    	/* pkts dropped - Q overflow       */
-    u_long  	mrts_pkt2large;     	/* pkts dropped - size > BKT SIZE  */
-    u_long	mrts_upq_sockfull;	/* upcalls dropped - socket full */
-};
-
-/*
- * Argument structure used by mrouted to get src-grp pkt counts
- */
-struct sioc_sg_req {
-    struct in_addr src;
-    struct in_addr grp;
-    u_long pktcnt;
-    u_long bytecnt;
-    u_long wrong_if;
-};
-
-/*
- * Argument structure used by mrouted to get vif pkt counts
- */
-struct sioc_vif_req {
-    vifi_t vifi;		/* vif number				*/
-    u_long icount;		/* Input packet count on vif		*/
-    u_long ocount;		/* Output packet count on vif		*/
-    u_long ibytes;		/* Input byte count on vif		*/
-    u_long obytes;		/* Output byte count on vif		*/
-};
-    
-
-/*
- * The kernel's virtual-interface structure.
- */
-struct vif {
-    u_char   		v_flags;     	/* VIFF_ flags defined above         */
-    u_char   		v_threshold;	/* min ttl required to forward on vif*/
-    u_int      		v_rate_limit; 	/* max rate			     */
-    struct tbf 	       *v_tbf;       	/* token bucket structure at intf.   */
-    struct in_addr 	v_lcl_addr;   	/* local interface address           */
-    struct in_addr 	v_rmt_addr;   	/* remote address (tunnels only)     */
-    struct ifnet       *v_ifp;	     	/* pointer to interface              */
-    u_long		v_pkt_in;	/* # pkts in on interface            */
-    u_long		v_pkt_out;	/* # pkts out on interface           */
-    u_long		v_bytes_in;	/* # bytes in on interface	     */
-    u_long		v_bytes_out;	/* # bytes out on interface	     */
-    struct route	v_route;	/* cached route if this is a tunnel */
-    u_int		v_rsvp_on;	/* RSVP listening on this vif */
-    struct socket      *v_rsvpd;	/* RSVP daemon socket */
-};
-
-/*
- * The kernel's multicast forwarding cache entry structure 
- * (A field for the type of service (mfc_tos) is to be added 
- * at a future point)
- */
-struct mfc {
-    struct in_addr  mfc_origin;	 		/* IP origin of mcasts   */
-    struct in_addr  mfc_mcastgrp;  		/* multicast group associated*/
-    vifi_t	    mfc_parent; 		/* incoming vif              */
-    u_char	    mfc_ttls[MAXVIFS]; 		/* forwarding ttls on vifs   */
-    u_long	    mfc_pkt_cnt;		/* pkt count for src-grp     */
-    u_long	    mfc_byte_cnt;		/* byte count for src-grp    */
-    u_long	    mfc_wrong_if;		/* wrong if for src-grp	     */
-    int		    mfc_expire;			/* time to clean entry up    */
-    struct timeval  mfc_last_assert;		/* last time I sent an assert*/
-    struct rtdetq  *mfc_stall;			/* q of packets awaiting mfc */
-    struct mfc     *mfc_next;			/* next mfc entry            */
-};
-
-/*
- * Struct used to communicate from kernel to multicast router
- * note the convenient similarity to an IP packet
- */
-struct igmpmsg {
-    u_long	    unused1;
-    u_long	    unused2;
-    u_char	    im_msgtype;			/* what type of message	    */
-#define IGMPMSG_NOCACHE		1
-#define IGMPMSG_WRONGVIF	2
-    u_char	    im_mbz;			/* must be zero		    */
-    u_char	    im_vif;			/* vif rec'd on		    */
-    u_char	    unused3;
-    struct in_addr  im_src, im_dst;
-};
-
-/*
- * Argument structure used for pkt info. while upcall is made
- */
-struct rtdetq {
-    struct mbuf 	*m;		/* A copy of the packet		    */
-    struct ifnet	*ifp;		/* Interface pkt came in on	    */
-    vifi_t		xmt_vif;	/* Saved copy of imo_multicast_vif  */
-#ifdef UPCALL_TIMING
-    struct timeval	t;		/* Timestamp */
-#endif /* UPCALL_TIMING */
-    struct rtdetq	*next;		/* Next in list of packets          */
-};
-
-#define MFCTBLSIZ	256
-#if (MFCTBLSIZ & (MFCTBLSIZ - 1)) == 0	  /* from sys:route.h */
-#define MFCHASHMOD(h)	((h) & (MFCTBLSIZ - 1))
-#else
-#define MFCHASHMOD(h)	((h) % MFCTBLSIZ)
-#endif
-
-#define MAX_UPQ	4		/* max. no of pkts in upcall Q */
-
-/*
- * Token Bucket filter code 
- */
-#define MAX_BKT_SIZE    10000             /* 10K bytes size 		*/
-#define MAXQSIZE        10                /* max # of pkts in queue 	*/
-
-/*
- * the token bucket filter at each vif
- */
-struct tbf
-{
-    struct timeval tbf_last_pkt_t; /* arr. time of last pkt 	*/
-    u_long tbf_n_tok;      	/* no of tokens in bucket 	*/
-    u_long tbf_q_len;    	/* length of queue at this vif	*/
-    u_long tbf_max_q_len;	/* max. queue length		*/
-    struct mbuf *tbf_q;		/* Packet queue			*/
-    struct mbuf *tbf_t;		/* tail-insertion pointer	*/
-};
-
-#ifdef _KERNEL
-
-struct sockopt;
-
-extern int	(*ip_mrouter_set)(struct socket *, struct sockopt *);
-extern int	(*ip_mrouter_get)(struct socket *, struct sockopt *);
-extern int	(*ip_mrouter_done)(void);
-extern int	(*mrt_ioctl)(int, caddr_t);
-
-#endif /* _KERNEL */
-
-#endif /* _NETINET_IP_MROUTE_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/ip_var.h b/newlib/libc/sys/linux/include/netinet/ip_var.h
deleted file mode 100644
index 8ee8602a8..000000000
--- a/newlib/libc/sys/linux/include/netinet/ip_var.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip_var.h	8.2 (Berkeley) 1/9/95
- * $FreeBSD: src/sys/netinet/ip_var.h,v 1.60 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_IP_VAR_H_
-#define	_NETINET_IP_VAR_H_
-
-#include <sys/queue.h>
-
-/*
- * Overlay for ip header used by other protocols (tcp, udp).
- */
-struct ipovly {
-	u_char	ih_x1[9];		/* (unused) */
-	u_char	ih_pr;			/* protocol */
-	u_short	ih_len;			/* protocol length */
-	struct	in_addr ih_src;		/* source internet address */
-	struct	in_addr ih_dst;		/* destination internet address */
-};
-
-/*
- * Ip reassembly queue structure.  Each fragment
- * being reassembled is attached to one of these structures.
- * They are timed out after ipq_ttl drops to 0, and may also
- * be reclaimed if memory becomes tight.
- */
-struct ipq {
-	TAILQ_ENTRY(ipq) ipq_list;	/* to other reass headers */
-	u_char	ipq_ttl;		/* time for reass q to live */
-	u_char	ipq_p;			/* protocol of this fragment */
-	u_short	ipq_id;			/* sequence id for reassembly */
-	struct mbuf *ipq_frags;		/* to ip headers of fragments */
-	struct	in_addr ipq_src,ipq_dst;
-#ifdef IPDIVERT
-	u_int32_t ipq_div_info;		/* ipfw divert port & flags */
-	u_int16_t ipq_div_cookie;	/* ipfw divert cookie */
-#endif
-};
-
-/*
- * Structure stored in mbuf in inpcb.ip_options
- * and passed to ip_output when ip options are in use.
- * The actual length of the options (including ipopt_dst)
- * is in m_len.
- */
-#define MAX_IPOPTLEN	40
-
-struct ipoption {
-	struct	in_addr ipopt_dst;	/* first-hop dst if source routed */
-	char	ipopt_list[MAX_IPOPTLEN];	/* options proper */
-};
-
-/*
- * Structure attached to inpcb.ip_moptions and
- * passed to ip_output when IP multicast options are in use.
- */
-struct ip_moptions {
-	struct	ifnet *imo_multicast_ifp; /* ifp for outgoing multicasts */
-	struct in_addr imo_multicast_addr; /* ifindex/addr on MULTICAST_IF */
-	u_char	imo_multicast_ttl;	/* TTL for outgoing multicasts */
-	u_char	imo_multicast_loop;	/* 1 => hear sends if a member */
-	u_short	imo_num_memberships;	/* no. memberships this socket */
-	struct	in_multi *imo_membership[IP_MAX_MEMBERSHIPS];
-	u_long	imo_multicast_vif;	/* vif num outgoing multicasts */
-};
-
-struct	ipstat {
-	u_long	ips_total;		/* total packets received */
-	u_long	ips_badsum;		/* checksum bad */
-	u_long	ips_tooshort;		/* packet too short */
-	u_long	ips_toosmall;		/* not enough data */
-	u_long	ips_badhlen;		/* ip header length < data size */
-	u_long	ips_badlen;		/* ip length < ip header length */
-	u_long	ips_fragments;		/* fragments received */
-	u_long	ips_fragdropped;	/* frags dropped (dups, out of space) */
-	u_long	ips_fragtimeout;	/* fragments timed out */
-	u_long	ips_forward;		/* packets forwarded */
-	u_long	ips_fastforward;	/* packets fast forwarded */
-	u_long	ips_cantforward;	/* packets rcvd for unreachable dest */
-	u_long	ips_redirectsent;	/* packets forwarded on same net */
-	u_long	ips_noproto;		/* unknown or unsupported protocol */
-	u_long	ips_delivered;		/* datagrams delivered to upper level*/
-	u_long	ips_localout;		/* total ip packets generated here */
-	u_long	ips_odropped;		/* lost packets due to nobufs, etc. */
-	u_long	ips_reassembled;	/* total packets reassembled ok */
-	u_long	ips_fragmented;		/* datagrams successfully fragmented */
-	u_long	ips_ofragments;		/* output fragments created */
-	u_long	ips_cantfrag;		/* don't fragment flag was set, etc. */
-	u_long	ips_badoptions;		/* error in option processing */
-	u_long	ips_noroute;		/* packets discarded due to no route */
-	u_long	ips_badvers;		/* ip version != 4 */
-	u_long	ips_rawout;		/* total raw ip packets generated */
-	u_long	ips_toolong;		/* ip length > max ip packet size */
-	u_long	ips_notmember;		/* multicasts for unregistered grps */
-	u_long	ips_nogif;		/* no match gif found */
-	u_long	ips_badaddr;		/* invalid address on header */
-};
-
-#ifdef _KERNEL
-
-/* flags passed to ip_output as last parameter */
-#define	IP_FORWARDING		0x1		/* most of ip header exists */
-#define	IP_RAWOUTPUT		0x2		/* raw ip header exists */
-#define	IP_ROUTETOIF		SO_DONTROUTE	/* bypass routing tables */
-#define	IP_ALLOWBROADCAST	SO_BROADCAST	/* can send broadcast packets */
-
-struct ip;
-struct inpcb;
-struct route;
-struct sockopt;
-
-extern struct	ipstat	ipstat;
-#ifndef RANDOM_IP_ID
-extern u_short	ip_id;				/* ip packet ctr, for ids */
-#endif
-extern int	ip_defttl;			/* default IP ttl */
-extern int	ipforwarding;			/* ip forwarding */
-extern struct route ipforward_rt;		/* ip forwarding cached route */
-extern u_char	ip_protox[];
-extern struct socket *ip_rsvpd;	/* reservation protocol daemon */
-extern struct socket *ip_mrouter; /* multicast routing daemon */
-extern int	(*legal_vif_num)(int);
-extern u_long	(*ip_mcast_src)(int);
-extern int rsvp_on;
-extern struct	pr_usrreqs rip_usrreqs;
-
-int	 ip_ctloutput(struct socket *, struct sockopt *sopt);
-void	 ip_drain(void);
-void	 ip_freemoptions(struct ip_moptions *);
-void	 ip_init(void);
-extern int	 (*ip_mforward)(struct ip *, struct ifnet *, struct mbuf *,
-			  struct ip_moptions *);
-int	 ip_output(struct mbuf *,
-	    struct mbuf *, struct route *, int, struct ip_moptions *);
-struct in_ifaddr *
-	 ip_rtaddr(struct in_addr, struct route *);
-void	 ip_savecontrol(struct inpcb *, struct mbuf **, struct ip *,
-		struct mbuf *);
-void	 ip_slowtimo(void);
-struct mbuf *
-	 ip_srcroute(void);
-void	 ip_stripoptions(struct mbuf *, struct mbuf *);
-#ifdef RANDOM_IP_ID
-u_int16_t	
-	 ip_randomid(void);
-#endif
-int	 rip_ctloutput(struct socket *, struct sockopt *);
-void	 rip_ctlinput(int, struct sockaddr *, void *);
-void	 rip_init(void);
-void	 rip_input(struct mbuf *, int);
-int	 rip_output(struct mbuf *, struct socket *, u_long);
-void	ipip_input(struct mbuf *, int);
-void	rsvp_input(struct mbuf *, int);
-int	ip_rsvp_init(struct socket *);
-int	ip_rsvp_done(void);
-int	ip_rsvp_vif_init(struct socket *, struct sockopt *);
-int	ip_rsvp_vif_done(struct socket *, struct sockopt *);
-void	ip_rsvp_force_done(struct socket *);
-
-#ifdef IPDIVERT
-void	div_init(void);
-void	div_input(struct mbuf *, int);
-void	divert_packet(struct mbuf *, int, int);
-extern struct pr_usrreqs div_usrreqs;
-extern u_int16_t ip_divert_cookie;
-#endif
-
-extern struct sockaddr_in *ip_fw_fwd_addr;
-
-void	in_delayed_cksum(struct mbuf *m);
-
-#endif /* _KERNEL */
-
-#endif /* !_NETINET_IP_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/ipprotosw.h b/newlib/libc/sys/linux/include/netinet/ipprotosw.h
deleted file mode 100644
index 0367ca2ed..000000000
--- a/newlib/libc/sys/linux/include/netinet/ipprotosw.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*-
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)protosw.h	8.1 (Berkeley) 6/2/93
- * $FreeBSD: src/sys/netinet/ipprotosw.h,v 1.4 2001/09/12 08:37:54 julian Exp $
- */
-
-#ifndef _NETINET_IPPROTOSW_H_
-#define _NETINET_IPPROTOSW_H_
-
-/*
- * For pfil_head structure.
- */
-#include <net/pfil.h>
-
-/* Forward declare these structures referenced from prototypes below. */
-struct mbuf;
-struct sockaddr;
-struct socket;
-struct sockopt;
-
-struct ipprotosw {
-	short	pr_type;		/* socket type used for */
-	struct	domain *pr_domain;	/* domain protocol a member of */
-	short	pr_protocol;		/* protocol number */
-	short	pr_flags;		/* see below */
-/* protocol-protocol hooks */
-	pr_in_input_t *pr_input;	/* input to protocol (from below) */
-	pr_output_t *pr_output;		/* output to protocol (from above) */
-	pr_ctlinput_t *pr_ctlinput;	/* control input (from below) */
-	pr_ctloutput_t *pr_ctloutput;	/* control output (from above) */
-/* user-protocol hook */
-	void	*pr_ousrreq;
-/* utility hooks */
-	pr_init_t *pr_init;
-	pr_fasttimo_t *pr_fasttimo;	/* fast timeout (200ms) */
-	pr_slowtimo_t *pr_slowtimo;	/* slow timeout (500ms) */
-	pr_drain_t *pr_drain;		/* flush any excess space possible */
-
-	struct	pr_usrreqs *pr_usrreqs;	/* supersedes pr_usrreq() */
-	struct	pfil_head	pr_pfh;
-};
-
-#endif /* !_NETINET_IPPROTOSW_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/tcp.h b/newlib/libc/sys/linux/include/netinet/tcp.h
deleted file mode 100644
index a6154e0ee..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/tcp.h,v 1.16 2001/01/09 18:26:17 rwatson Exp $
- */
-
-#ifndef _NETINET_TCP_H_
-#define _NETINET_TCP_H_
-
-typedef	u_int32_t tcp_seq;
-typedef u_int32_t tcp_cc;		/* connection count per rfc1644 */
-
-#define tcp6_seq	tcp_seq	/* for KAME src sync over BSD*'s */
-#define tcp6hdr		tcphdr	/* for KAME src sync over BSD*'s */
-
-/*
- * TCP header.
- * Per RFC 793, September, 1981.
- */
-struct tcphdr {
-	u_short	th_sport;		/* source port */
-	u_short	th_dport;		/* destination port */
-	tcp_seq	th_seq;			/* sequence number */
-	tcp_seq	th_ack;			/* acknowledgement number */
-#if BYTE_ORDER == LITTLE_ENDIAN
-	u_int	th_x2:4,		/* (unused) */
-		th_off:4;		/* data offset */
-#endif
-#if BYTE_ORDER == BIG_ENDIAN
-	u_int	th_off:4,		/* data offset */
-		th_x2:4;		/* (unused) */
-#endif
-	u_char	th_flags;
-#define	TH_FIN	0x01
-#define	TH_SYN	0x02
-#define	TH_RST	0x04
-#define	TH_PUSH	0x08
-#define	TH_ACK	0x10
-#define	TH_URG	0x20
-#define	TH_ECE	0x40
-#define	TH_CWR	0x80
-#define	TH_FLAGS	(TH_FIN|TH_SYN|TH_RST|TH_ACK|TH_URG|TH_ECE|TH_CWR)
-
-	u_short	th_win;			/* window */
-	u_short	th_sum;			/* checksum */
-	u_short	th_urp;			/* urgent pointer */
-};
-
-#define	TCPOPT_EOL		0
-#define	TCPOPT_NOP		1
-#define	TCPOPT_MAXSEG		2
-#define    TCPOLEN_MAXSEG		4
-#define TCPOPT_WINDOW		3
-#define    TCPOLEN_WINDOW		3
-#define TCPOPT_SACK_PERMITTED	4		/* Experimental */
-#define    TCPOLEN_SACK_PERMITTED	2
-#define TCPOPT_SACK		5		/* Experimental */
-#define TCPOPT_TIMESTAMP	8
-#define    TCPOLEN_TIMESTAMP		10
-#define    TCPOLEN_TSTAMP_APPA		(TCPOLEN_TIMESTAMP+2) /* appendix A */
-#define    TCPOPT_TSTAMP_HDR		\
-    (TCPOPT_NOP<<24|TCPOPT_NOP<<16|TCPOPT_TIMESTAMP<<8|TCPOLEN_TIMESTAMP)
-
-#define	TCPOPT_CC		11		/* CC options: RFC-1644 */
-#define TCPOPT_CCNEW		12
-#define TCPOPT_CCECHO		13
-#define	   TCPOLEN_CC			6
-#define	   TCPOLEN_CC_APPA		(TCPOLEN_CC+2)
-#define	   TCPOPT_CC_HDR(ccopt)		\
-    (TCPOPT_NOP<<24|TCPOPT_NOP<<16|(ccopt)<<8|TCPOLEN_CC)
-
-/*
- * Default maximum segment size for TCP.
- * With an IP MSS of 576, this is 536,
- * but 512 is probably more convenient.
- * This should be defined as MIN(512, IP_MSS - sizeof (struct tcpiphdr)).
- */
-#define	TCP_MSS	512
-
-/*
- * Default maximum segment size for TCP6.
- * With an IP6 MSS of 1280, this is 1220,
- * but 1024 is probably more convenient. (xxx kazu in doubt)
- * This should be defined as MIN(1024, IP6_MSS - sizeof (struct tcpip6hdr))
- */
-#define	TCP6_MSS	1024
-
-#define	TCP_MAXWIN	65535	/* largest value for (unscaled) window */
-#define	TTCP_CLIENT_SND_WND	4096	/* dflt send window for T/TCP client */
-
-#define TCP_MAX_WINSHIFT	14	/* maximum window shift */
-
-#define TCP_MAXBURST		4 	/* maximum segments in a burst */
-
-#define TCP_MAXHLEN	(0xf<<2)	/* max length of header in bytes */
-#define TCP_MAXOLEN	(TCP_MAXHLEN - sizeof(struct tcphdr))
-					/* max space left for options */
-
-/*
- * User-settable options (used with setsockopt).
- */
-#define	TCP_NODELAY	0x01	/* don't delay send to coalesce packets */
-#define	TCP_MAXSEG	0x02	/* set maximum segment size */
-#define TCP_NOPUSH	0x04	/* don't push last block of write */
-#define TCP_NOOPT	0x08	/* don't use TCP options */
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/tcp_debug.h b/newlib/libc/sys/linux/include/netinet/tcp_debug.h
deleted file mode 100644
index 3b27d09ac..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp_debug.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_debug.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/tcp_debug.h,v 1.11 2000/01/29 11:49:05 shin Exp $
- */
-
-#ifndef _NETINET_TCP_DEBUG_H_
-#define	_NETINET_TCP_DEBUG_H_
-
-struct	tcp_debug {
-	n_time	td_time;
-	short	td_act;
-	short	td_ostate;
-	caddr_t	td_tcb;
-	int	td_family;
-	/*
-	 * Co-existense of td_ti and td_ti6 below is ugly, but it is necessary
-	 * to achieve backword compatibility to some extent.
-	 */
-	struct	tcpiphdr td_ti;
-	struct {
-#if !defined(_KERNEL) && defined(INET6)
-		struct	ip6_hdr ip6;
-#else
-		u_char	ip6buf[40]; /* sizeof(struct ip6_hdr) */
-#endif
-		struct	tcphdr th;
-	} td_ti6;
-#define	td_ip6buf	td_ti6.ip6buf
-	short	td_req;
-	struct	tcpcb td_cb;
-};
-
-#define	TA_INPUT 	0
-#define	TA_OUTPUT	1
-#define	TA_USER		2
-#define	TA_RESPOND	3
-#define	TA_DROP		4
-
-#ifdef TANAMES
-static char	*tanames[] =
-    { "input", "output", "user", "respond", "drop" };
-#endif
-
-#define	TCP_NDEBUG 100
-
-#ifndef _KERNEL
-/* XXX common variables for broken applications. */
-struct	tcp_debug tcp_debug[TCP_NDEBUG];
-int	tcp_debx;
-#endif
-
-#endif /* !_NETINET_TCP_DEBUG_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/tcp_fsm.h b/newlib/libc/sys/linux/include/netinet/tcp_fsm.h
deleted file mode 100644
index a45cbc76e..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp_fsm.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_fsm.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/tcp_fsm.h,v 1.15 2002/02/03 11:57:32 markm Exp $
- */
-
-#ifndef _NETINET_TCP_FSM_H_
-#define _NETINET_TCP_FSM_H_
-
-/*
- * TCP FSM state definitions.
- * Per RFC793, September, 1981.
- */
-
-#define	TCP_NSTATES	11
-
-#define	TCPS_CLOSED		0	/* closed */
-#define	TCPS_LISTEN		1	/* listening for connection */
-#define	TCPS_SYN_SENT		2	/* active, have sent syn */
-#define	TCPS_SYN_RECEIVED	3	/* have send and received syn */
-/* states < TCPS_ESTABLISHED are those where connections not established */
-#define	TCPS_ESTABLISHED	4	/* established */
-#define	TCPS_CLOSE_WAIT		5	/* rcvd fin, waiting for close */
-/* states > TCPS_CLOSE_WAIT are those where user has closed */
-#define	TCPS_FIN_WAIT_1		6	/* have closed, sent fin */
-#define	TCPS_CLOSING		7	/* closed xchd FIN; await FIN ACK */
-#define	TCPS_LAST_ACK		8	/* had fin and close; await FIN ACK */
-/* states > TCPS_CLOSE_WAIT && < TCPS_FIN_WAIT_2 await ACK of FIN */
-#define	TCPS_FIN_WAIT_2		9	/* have closed, fin is acked */
-#define	TCPS_TIME_WAIT		10	/* in 2*msl quiet wait after close */
-
-/* for KAME src sync over BSD*'s */
-#define	TCP6_NSTATES		TCP_NSTATES
-#define	TCP6S_CLOSED		TCPS_CLOSED
-#define	TCP6S_LISTEN		TCPS_LISTEN
-#define	TCP6S_SYN_SENT		TCPS_SYN_SENT
-#define	TCP6S_SYN_RECEIVED	TCPS_SYN_RECEIVED
-#define	TCP6S_ESTABLISHED	TCPS_ESTABLISHED
-#define	TCP6S_CLOSE_WAIT	TCPS_CLOSE_WAIT
-#define	TCP6S_FIN_WAIT_1	TCPS_FIN_WAIT_1
-#define	TCP6S_CLOSING		TCPS_CLOSING
-#define	TCP6S_LAST_ACK		TCPS_LAST_ACK
-#define	TCP6S_FIN_WAIT_2	TCPS_FIN_WAIT_2
-#define	TCP6S_TIME_WAIT		TCPS_TIME_WAIT
-
-#define	TCPS_HAVERCVDSYN(s)	((s) >= TCPS_SYN_RECEIVED)
-#define	TCPS_HAVEESTABLISHED(s)	((s) >= TCPS_ESTABLISHED)
-#define	TCPS_HAVERCVDFIN(s)	((s) >= TCPS_TIME_WAIT)
-
-#ifdef	TCPOUTFLAGS
-/*
- * Flags used when sending segments in tcp_output.
- * Basic flags (TH_RST,TH_ACK,TH_SYN,TH_FIN) are totally
- * determined by state, with the proviso that TH_FIN is sent only
- * if all data queued for output is included in the segment.
- */
-static u_char	tcp_outflags[TCP_NSTATES] = {
-	TH_RST|TH_ACK,		/* 0, CLOSED */
-	0,			/* 1, LISTEN */
-	TH_SYN,			/* 2, SYN_SENT */
-	TH_SYN|TH_ACK,		/* 3, SYN_RECEIVED */
-	TH_ACK,			/* 4, ESTABLISHED */
-	TH_ACK,			/* 5, CLOSE_WAIT */
-	TH_FIN|TH_ACK,		/* 6, FIN_WAIT_1 */
-	TH_FIN|TH_ACK,		/* 7, CLOSING */
-	TH_FIN|TH_ACK,		/* 8, LAST_ACK */
-	TH_ACK,			/* 9, FIN_WAIT_2 */
-	TH_ACK,			/* 10, TIME_WAIT */
-};	
-#endif
-
-#ifdef KPROF
-int	tcp_acounts[TCP_NSTATES][PRU_NREQ];
-#endif
-
-#ifdef	TCPSTATES
-const char *tcpstates[] = {
-	"CLOSED",	"LISTEN",	"SYN_SENT",	"SYN_RCVD",
-	"ESTABLISHED",	"CLOSE_WAIT",	"FIN_WAIT_1",	"CLOSING",
-	"LAST_ACK",	"FIN_WAIT_2",	"TIME_WAIT",
-};
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/tcp_seq.h b/newlib/libc/sys/linux/include/netinet/tcp_seq.h
deleted file mode 100644
index bb15401ec..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp_seq.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993, 1995
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_seq.h	8.3 (Berkeley) 6/21/95
- * $FreeBSD: src/sys/netinet/tcp_seq.h,v 1.18 2001/11/21 18:45:51 jlemon Exp $
- */
-
-#ifndef _NETINET_TCP_SEQ_H_
-#define _NETINET_TCP_SEQ_H_
-/*
- * TCP sequence numbers are 32 bit integers operated
- * on with modular arithmetic.  These macros can be
- * used to compare such integers.
- */
-#define	SEQ_LT(a,b)	((int)((a)-(b)) < 0)
-#define	SEQ_LEQ(a,b)	((int)((a)-(b)) <= 0)
-#define	SEQ_GT(a,b)	((int)((a)-(b)) > 0)
-#define	SEQ_GEQ(a,b)	((int)((a)-(b)) >= 0)
-
-/* for modulo comparisons of timestamps */
-#define TSTMP_LT(a,b)	((int)((a)-(b)) < 0)
-#define TSTMP_GEQ(a,b)	((int)((a)-(b)) >= 0)
-
-/*
- * TCP connection counts are 32 bit integers operated
- * on with modular arithmetic.  These macros can be
- * used to compare such integers.
- */
-#define	CC_LT(a,b)	((int)((a)-(b)) < 0)
-#define	CC_LEQ(a,b)	((int)((a)-(b)) <= 0)
-#define	CC_GT(a,b)	((int)((a)-(b)) > 0)
-#define	CC_GEQ(a,b)	((int)((a)-(b)) >= 0)
-
-/* Macro to increment a CC: skip 0 which has a special meaning */
-#define CC_INC(c)	(++(c) == 0 ? ++(c) : (c))
-
-/*
- * Macros to initialize tcp sequence numbers for
- * send and receive from initial send and receive
- * sequence numbers.
- */
-#define	tcp_rcvseqinit(tp) \
-	(tp)->rcv_adv = (tp)->rcv_nxt = (tp)->irs + 1
-
-#define	tcp_sendseqinit(tp) \
-	(tp)->snd_una = (tp)->snd_nxt = (tp)->snd_max = (tp)->snd_up = \
-	    (tp)->snd_recover = (tp)->iss
-
-#define TCP_PAWS_IDLE	(24 * 24 * 60 * 60 * hz)
-					/* timestamp wrap-around time */
-
-#ifdef _KERNEL
-extern tcp_cc	tcp_ccgen;		/* global connection count */
-#endif /* _KERNEL */
-#endif /* _NETINET_TCP_SEQ_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/tcp_timer.h b/newlib/libc/sys/linux/include/netinet/tcp_timer.h
deleted file mode 100644
index 1af128148..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp_timer.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_timer.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/tcp_timer.h,v 1.19 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_TCP_TIMER_H_
-#define _NETINET_TCP_TIMER_H_
-
-/*
- * The TCPT_REXMT timer is used to force retransmissions.
- * The TCP has the TCPT_REXMT timer set whenever segments
- * have been sent for which ACKs are expected but not yet
- * received.  If an ACK is received which advances tp->snd_una,
- * then the retransmit timer is cleared (if there are no more
- * outstanding segments) or reset to the base value (if there
- * are more ACKs expected).  Whenever the retransmit timer goes off,
- * we retransmit one unacknowledged segment, and do a backoff
- * on the retransmit timer.
- *
- * The TCPT_PERSIST timer is used to keep window size information
- * flowing even if the window goes shut.  If all previous transmissions
- * have been acknowledged (so that there are no retransmissions in progress),
- * and the window is too small to bother sending anything, then we start
- * the TCPT_PERSIST timer.  When it expires, if the window is nonzero,
- * we go to transmit state.  Otherwise, at intervals send a single byte
- * into the peer's window to force him to update our window information.
- * We do this at most as often as TCPT_PERSMIN time intervals,
- * but no more frequently than the current estimate of round-trip
- * packet time.  The TCPT_PERSIST timer is cleared whenever we receive
- * a window update from the peer.
- *
- * The TCPT_KEEP timer is used to keep connections alive.  If an
- * connection is idle (no segments received) for TCPTV_KEEP_INIT amount of time,
- * but not yet established, then we drop the connection.  Once the connection
- * is established, if the connection is idle for TCPTV_KEEP_IDLE time
- * (and keepalives have been enabled on the socket), we begin to probe
- * the connection.  We force the peer to send us a segment by sending:
- *	<SEQ=SND.UNA-1><ACK=RCV.NXT><CTL=ACK>
- * This segment is (deliberately) outside the window, and should elicit
- * an ack segment in response from the peer.  If, despite the TCPT_KEEP
- * initiated segments we cannot elicit a response from a peer in TCPT_MAXIDLE
- * amount of time probing, then we drop the connection.
- */
-
-/*
- * Time constants.
- */
-#define	TCPTV_MSL	( 30*hz)		/* max seg lifetime (hah!) */
-#define	TCPTV_SRTTBASE	0			/* base roundtrip time;
-						   if 0, no idea yet */
-#define	TCPTV_RTOBASE	(  3*hz)		/* assumed RTO if no info */
-#define	TCPTV_SRTTDFLT	(  3*hz)		/* assumed RTT if no info */
-
-#define	TCPTV_PERSMIN	(  5*hz)		/* retransmit persistence */
-#define	TCPTV_PERSMAX	( 60*hz)		/* maximum persist interval */
-
-#define	TCPTV_KEEP_INIT	( 75*hz)		/* initial connect keepalive */
-#define	TCPTV_KEEP_IDLE	(120*60*hz)		/* dflt time before probing */
-#define	TCPTV_KEEPINTVL	( 75*hz)		/* default probe interval */
-#define	TCPTV_KEEPCNT	8			/* max probes before drop */
-
-#define	TCPTV_MIN	(  1*hz)		/* minimum allowable value */
-#define	TCPTV_REXMTMAX	( 64*hz)		/* max allowable REXMT value */
-
-#define TCPTV_TWTRUNC	8			/* RTO factor to truncate TW */
-
-#define	TCP_LINGERTIME	120			/* linger at most 2 minutes */
-
-#define	TCP_MAXRXTSHIFT	12			/* maximum retransmits */
-
-#define	TCPTV_DELACK	(hz / PR_FASTHZ / 2)	/* 100ms timeout */
-
-#ifdef	TCPTIMERS
-static char *tcptimers[] =
-    { "REXMT", "PERSIST", "KEEP", "2MSL" };
-#endif
-
-/*
- * Force a time value to be in a certain range.
- */
-#define	TCPT_RANGESET(tv, value, tvmin, tvmax) do { \
-	(tv) = (value); \
-	if ((u_long)(tv) < (u_long)(tvmin)) \
-		(tv) = (tvmin); \
-	else if ((u_long)(tv) > (u_long)(tvmax)) \
-		(tv) = (tvmax); \
-} while(0)
-
-#ifdef _KERNEL
-extern int tcp_keepinit;		/* time to establish connection */
-extern int tcp_keepidle;		/* time before keepalive probes begin */
-extern int tcp_keepintvl;		/* time between keepalive probes */
-extern int tcp_maxidle;			/* time to drop after starting probes */
-extern int tcp_delacktime;		/* time before sending a delayed ACK */
-extern int tcp_maxpersistidle;
-extern int tcp_msl;
-extern int tcp_ttl;			/* time to live for TCP segs */
-extern int tcp_backoff[];
-
-void	tcp_timer_2msl(void *xtp);
-void	tcp_timer_keep(void *xtp);
-void	tcp_timer_persist(void *xtp);
-void	tcp_timer_rexmt(void *xtp);
-void	tcp_timer_delack(void *xtp);
-
-#endif /* _KERNEL */
-
-#endif /* !_NETINET_TCP_TIMER_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/tcp_var.h b/newlib/libc/sys/linux/include/netinet/tcp_var.h
deleted file mode 100644
index adb5208e9..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcp_var.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993, 1994, 1995
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_var.h	8.4 (Berkeley) 5/24/95
- * $FreeBSD: src/sys/netinet/tcp_var.h,v 1.76 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_TCP_VAR_H_
-#define _NETINET_TCP_VAR_H_
-
-#include <netinet/in_pcb.h>		/* needed for in_conninfo, inp_gen_t */
-
-/*
- * Kernel variables for tcp.
- */
-extern int	tcp_do_rfc1323;
-extern int	tcp_do_rfc1644;
-
-/* TCP segment queue entry */
-struct tseg_qent {
-	LIST_ENTRY(tseg_qent) tqe_q;
-	int	tqe_len;		/* TCP segment data length */
-	struct	tcphdr *tqe_th;		/* a pointer to tcp header */
-	struct	mbuf	*tqe_m;		/* mbuf contains packet */
-};
-LIST_HEAD(tsegqe_head, tseg_qent);
-#ifdef MALLOC_DECLARE
-MALLOC_DECLARE(M_TSEGQ);
-#endif
-
-struct tcptemp {
-	u_char	tt_ipgen[40]; /* the size must be of max ip header, now IPv6 */
-	struct	tcphdr tt_t;
-};
-
-#define tcp6cb		tcpcb  /* for KAME src sync over BSD*'s */
-
-/*
- * Tcp control block, one per tcp; fields:
- * Organized for 16 byte cacheline efficiency.
- */
-struct tcpcb {
-	struct	tsegqe_head t_segq;
-	int	t_dupacks;		/* consecutive dup acks recd */
-	struct	tcptemp	*unused;	/* unused */
-
-	struct	callout *tt_rexmt;	/* retransmit timer */
-	struct	callout *tt_persist;	/* retransmit persistence */
-	struct	callout *tt_keep;	/* keepalive */
-	struct	callout *tt_2msl;	/* 2*msl TIME_WAIT timer */
-	struct	callout *tt_delack;	/* delayed ACK timer */
-
-	struct	inpcb *t_inpcb;		/* back pointer to internet pcb */
-	int	t_state;		/* state of this connection */
-	u_int	t_flags;
-#define	TF_ACKNOW	0x00001		/* ack peer immediately */
-#define	TF_DELACK	0x00002		/* ack, but try to delay it */
-#define	TF_NODELAY	0x00004		/* don't delay packets to coalesce */
-#define	TF_NOOPT	0x00008		/* don't use tcp options */
-#define	TF_SENTFIN	0x00010		/* have sent FIN */
-#define	TF_REQ_SCALE	0x00020		/* have/will request window scaling */
-#define	TF_RCVD_SCALE	0x00040		/* other side has requested scaling */
-#define	TF_REQ_TSTMP	0x00080		/* have/will request timestamps */
-#define	TF_RCVD_TSTMP	0x00100		/* a timestamp was received in SYN */
-#define	TF_SACK_PERMIT	0x00200		/* other side said I could SACK */
-#define	TF_NEEDSYN	0x00400		/* send SYN (implicit state) */
-#define	TF_NEEDFIN	0x00800		/* send FIN (implicit state) */
-#define	TF_NOPUSH	0x01000		/* don't push */
-#define	TF_REQ_CC	0x02000		/* have/will request CC */
-#define	TF_RCVD_CC	0x04000		/* a CC was received in SYN */
-#define	TF_SENDCCNEW	0x08000		/* send CCnew instead of CC in SYN */
-#define	TF_MORETOCOME	0x10000		/* More data to be appended to sock */
-#define	TF_LQ_OVERFLOW	0x20000		/* listen queue overflow */
-#define	TF_LASTIDLE	0x40000		/* connection was previously idle */
-#define TF_RXWIN0SENT	0x80000		/* sent a receiver win 0 in response */
-	int	t_force;		/* 1 if forcing out a byte */
-
-	tcp_seq	snd_una;		/* send unacknowledged */
-	tcp_seq	snd_max;		/* highest sequence number sent;
-					 * used to recognize retransmits
-					 */
-	tcp_seq	snd_nxt;		/* send next */
-	tcp_seq	snd_up;			/* send urgent pointer */
-
-	tcp_seq	snd_wl1;		/* window update seg seq number */
-	tcp_seq	snd_wl2;		/* window update seg ack number */
-	tcp_seq	iss;			/* initial send sequence number */
-	tcp_seq	irs;			/* initial receive sequence number */
-
-	tcp_seq	rcv_nxt;		/* receive next */
-	tcp_seq	rcv_adv;		/* advertised window */
-	u_long	rcv_wnd;		/* receive window */
-	tcp_seq	rcv_up;			/* receive urgent pointer */
-
-	u_long	snd_wnd;		/* send window */
-	u_long	snd_cwnd;		/* congestion-controlled window */
-	u_long	snd_ssthresh;		/* snd_cwnd size threshold for
-					 * for slow start exponential to
-					 * linear switch
-					 */
-	tcp_seq	snd_recover;		/* for use in fast recovery */
-
-	u_int	t_maxopd;		/* mss plus options */
-
-	u_long	t_rcvtime;		/* inactivity time */
-	u_long	t_starttime;		/* time connection was established */
-	int	t_rtttime;		/* round trip time */
-	tcp_seq	t_rtseq;		/* sequence number being timed */
-
-	int	t_rxtcur;		/* current retransmit value (ticks) */
-	u_int	t_maxseg;		/* maximum segment size */
-	int	t_srtt;			/* smoothed round-trip time */
-	int	t_rttvar;		/* variance in round-trip time */
-
-	int	t_rxtshift;		/* log(2) of rexmt exp. backoff */
-	u_int	t_rttmin;		/* minimum rtt allowed */
-	u_long	t_rttupdated;		/* number of times rtt sampled */
-	u_long	max_sndwnd;		/* largest window peer has offered */
-
-	int	t_softerror;		/* possible error not yet reported */
-/* out-of-band data */
-	char	t_oobflags;		/* have some */
-	char	t_iobc;			/* input character */
-#define	TCPOOB_HAVEDATA	0x01
-#define	TCPOOB_HADDATA	0x02
-/* RFC 1323 variables */
-	u_char	snd_scale;		/* window scaling for send window */
-	u_char	rcv_scale;		/* window scaling for recv window */
-	u_char	request_r_scale;	/* pending window scaling */
-	u_char	requested_s_scale;
-	u_long	ts_recent;		/* timestamp echo data */
-
-	u_long	ts_recent_age;		/* when last updated */
-	tcp_seq	last_ack_sent;
-/* RFC 1644 variables */
-	tcp_cc	cc_send;		/* send connection count */
-	tcp_cc	cc_recv;		/* receive connection count */
-/* experimental */
-	u_long	snd_cwnd_prev;		/* cwnd prior to retransmit */
-	u_long	snd_ssthresh_prev;	/* ssthresh prior to retransmit */
-	u_long	t_badrxtwin;		/* window for retransmit recovery */
-};
-
-/*
- * Structure to hold TCP options that are only used during segment
- * processing (in tcp_input), but not held in the tcpcb.
- * It's basically used to reduce the number of parameters
- * to tcp_dooptions.
- */
-struct tcpopt {
-	u_long		to_flags;	/* which options are present */
-#define TOF_TS		0x0001		/* timestamp */
-#define TOF_CC		0x0002		/* CC and CCnew are exclusive */
-#define TOF_CCNEW	0x0004
-#define	TOF_CCECHO	0x0008
-#define	TOF_MSS		0x0010
-#define	TOF_SCALE	0x0020
-	u_int32_t	to_tsval;
-	u_int32_t	to_tsecr;
-	tcp_cc		to_cc;		/* holds CC or CCnew */
-	tcp_cc		to_ccecho;
-	u_int16_t	to_mss;
-	u_int8_t 	to_requested_s_scale;
-	u_int8_t 	to_pad;
-};
-
-struct syncache {
-	inp_gen_t	sc_inp_gencnt;		/* pointer check */
-	struct 		tcpcb *sc_tp;		/* tcb for listening socket */
-	struct		mbuf *sc_ipopts;	/* source route */
-	struct 		in_conninfo sc_inc;	/* addresses */
-#define sc_route	sc_inc.inc_route
-#define sc_route6	sc_inc.inc6_route
-	u_int32_t	sc_tsrecent;
-	tcp_cc		sc_cc_send;		/* holds CC or CCnew */
-	tcp_cc		sc_cc_recv;
-	tcp_seq 	sc_irs;			/* seq from peer */
-	tcp_seq 	sc_iss;			/* our ISS */
-	u_long		sc_rxttime;		/* retransmit time */
-	u_int16_t	sc_rxtslot; 		/* retransmit counter */
-	u_int16_t	sc_peer_mss;		/* peer's MSS */
-	u_int16_t	sc_wnd;			/* advertised window */
-	u_int8_t 	sc_requested_s_scale:4,
-			sc_request_r_scale:4;
-	u_int8_t	sc_flags;
-#define SCF_NOOPT	0x01			/* no TCP options */
-#define SCF_WINSCALE	0x02			/* negotiated window scaling */
-#define SCF_TIMESTAMP	0x04			/* negotiated timestamps */
-#define SCF_CC		0x08			/* negotiated CC */
-#define SCF_UNREACH	0x10			/* icmp unreachable received */
-#define SCF_KEEPROUTE	0x20			/* keep cloned route */
-	TAILQ_ENTRY(syncache)	sc_hash;
-	TAILQ_ENTRY(syncache)	sc_timerq;
-};
-
-struct syncache_head {
-	TAILQ_HEAD(, syncache)	sch_bucket;
-	u_int		sch_length;
-};
- 
-/*
- * The TAO cache entry which is stored in the protocol family specific
- * portion of the route metrics.
- */
-struct rmxp_tao {
-	tcp_cc	tao_cc;			/* latest CC in valid SYN */
-	tcp_cc	tao_ccsent;		/* latest CC sent to peer */
-	u_short	tao_mssopt;		/* peer's cached MSS */
-#ifdef notyet
-	u_short	tao_flags;		/* cache status flags */
-#define	TAOF_DONT	0x0001		/* peer doesn't understand rfc1644 */
-#define	TAOF_OK		0x0002		/* peer does understand rfc1644 */
-#define	TAOF_UNDEF	0		/* we don't know yet */
-#endif /* notyet */
-};
-#define rmx_taop(r)	((struct rmxp_tao *)(r).rmx_filler)
-
-#define	intotcpcb(ip)	((struct tcpcb *)(ip)->inp_ppcb)
-#define	sototcpcb(so)	(intotcpcb(sotoinpcb(so)))
-
-/*
- * The smoothed round-trip time and estimated variance
- * are stored as fixed point numbers scaled by the values below.
- * For convenience, these scales are also used in smoothing the average
- * (smoothed = (1/scale)sample + ((scale-1)/scale)smoothed).
- * With these scales, srtt has 3 bits to the right of the binary point,
- * and thus an "ALPHA" of 0.875.  rttvar has 2 bits to the right of the
- * binary point, and is smoothed with an ALPHA of 0.75.
- */
-#define	TCP_RTT_SCALE		32	/* multiplier for srtt; 3 bits frac. */
-#define	TCP_RTT_SHIFT		5	/* shift for srtt; 3 bits frac. */
-#define	TCP_RTTVAR_SCALE	16	/* multiplier for rttvar; 2 bits */
-#define	TCP_RTTVAR_SHIFT	4	/* shift for rttvar; 2 bits */
-#define	TCP_DELTA_SHIFT		2	/* see tcp_input.c */
-
-/*
- * The initial retransmission should happen at rtt + 4 * rttvar.
- * Because of the way we do the smoothing, srtt and rttvar
- * will each average +1/2 tick of bias.  When we compute
- * the retransmit timer, we want 1/2 tick of rounding and
- * 1 extra tick because of +-1/2 tick uncertainty in the
- * firing of the timer.  The bias will give us exactly the
- * 1.5 tick we need.  But, because the bias is
- * statistical, we have to test that we don't drop below
- * the minimum feasible timer (which is 2 ticks).
- * This version of the macro adapted from a paper by Lawrence
- * Brakmo and Larry Peterson which outlines a problem caused
- * by insufficient precision in the original implementation,
- * which results in inappropriately large RTO values for very
- * fast networks.
- */
-#define	TCP_REXMTVAL(tp) \
-	max((tp)->t_rttmin, (((tp)->t_srtt >> (TCP_RTT_SHIFT - TCP_DELTA_SHIFT))  \
-	  + (tp)->t_rttvar) >> TCP_DELTA_SHIFT)
-
-/*
- * TCP statistics.
- * Many of these should be kept per connection,
- * but that's inconvenient at the moment.
- */
-struct	tcpstat {
-	u_long	tcps_connattempt;	/* connections initiated */
-	u_long	tcps_accepts;		/* connections accepted */
-	u_long	tcps_connects;		/* connections established */
-	u_long	tcps_drops;		/* connections dropped */
-	u_long	tcps_conndrops;		/* embryonic connections dropped */
-	u_long	tcps_closed;		/* conn. closed (includes drops) */
-	u_long	tcps_segstimed;		/* segs where we tried to get rtt */
-	u_long	tcps_rttupdated;	/* times we succeeded */
-	u_long	tcps_delack;		/* delayed acks sent */
-	u_long	tcps_timeoutdrop;	/* conn. dropped in rxmt timeout */
-	u_long	tcps_rexmttimeo;	/* retransmit timeouts */
-	u_long	tcps_persisttimeo;	/* persist timeouts */
-	u_long	tcps_keeptimeo;		/* keepalive timeouts */
-	u_long	tcps_keepprobe;		/* keepalive probes sent */
-	u_long	tcps_keepdrops;		/* connections dropped in keepalive */
-
-	u_long	tcps_sndtotal;		/* total packets sent */
-	u_long	tcps_sndpack;		/* data packets sent */
-	u_long	tcps_sndbyte;		/* data bytes sent */
-	u_long	tcps_sndrexmitpack;	/* data packets retransmitted */
-	u_long	tcps_sndrexmitbyte;	/* data bytes retransmitted */
-	u_long	tcps_sndacks;		/* ack-only packets sent */
-	u_long	tcps_sndprobe;		/* window probes sent */
-	u_long	tcps_sndurg;		/* packets sent with URG only */
-	u_long	tcps_sndwinup;		/* window update-only packets sent */
-	u_long	tcps_sndctrl;		/* control (SYN|FIN|RST) packets sent */
-
-	u_long	tcps_rcvtotal;		/* total packets received */
-	u_long	tcps_rcvpack;		/* packets received in sequence */
-	u_long	tcps_rcvbyte;		/* bytes received in sequence */
-	u_long	tcps_rcvbadsum;		/* packets received with ccksum errs */
-	u_long	tcps_rcvbadoff;		/* packets received with bad offset */
-	u_long	tcps_rcvmemdrop;	/* packets dropped for lack of memory */
-	u_long	tcps_rcvshort;		/* packets received too short */
-	u_long	tcps_rcvduppack;	/* duplicate-only packets received */
-	u_long	tcps_rcvdupbyte;	/* duplicate-only bytes received */
-	u_long	tcps_rcvpartduppack;	/* packets with some duplicate data */
-	u_long	tcps_rcvpartdupbyte;	/* dup. bytes in part-dup. packets */
-	u_long	tcps_rcvoopack;		/* out-of-order packets received */
-	u_long	tcps_rcvoobyte;		/* out-of-order bytes received */
-	u_long	tcps_rcvpackafterwin;	/* packets with data after window */
-	u_long	tcps_rcvbyteafterwin;	/* bytes rcvd after window */
-	u_long	tcps_rcvafterclose;	/* packets rcvd after "close" */
-	u_long	tcps_rcvwinprobe;	/* rcvd window probe packets */
-	u_long	tcps_rcvdupack;		/* rcvd duplicate acks */
-	u_long	tcps_rcvacktoomuch;	/* rcvd acks for unsent data */
-	u_long	tcps_rcvackpack;	/* rcvd ack packets */
-	u_long	tcps_rcvackbyte;	/* bytes acked by rcvd acks */
-	u_long	tcps_rcvwinupd;		/* rcvd window update packets */
-	u_long	tcps_pawsdrop;		/* segments dropped due to PAWS */
-	u_long	tcps_predack;		/* times hdr predict ok for acks */
-	u_long	tcps_preddat;		/* times hdr predict ok for data pkts */
-	u_long	tcps_pcbcachemiss;
-	u_long	tcps_cachedrtt;		/* times cached RTT in route updated */
-	u_long	tcps_cachedrttvar;	/* times cached rttvar updated */
-	u_long	tcps_cachedssthresh;	/* times cached ssthresh updated */
-	u_long	tcps_usedrtt;		/* times RTT initialized from route */
-	u_long	tcps_usedrttvar;	/* times RTTVAR initialized from rt */
-	u_long	tcps_usedssthresh;	/* times ssthresh initialized from rt*/
-	u_long	tcps_persistdrop;	/* timeout in persist state */
-	u_long	tcps_badsyn;		/* bogus SYN, e.g. premature ACK */
-	u_long	tcps_mturesent;		/* resends due to MTU discovery */
-	u_long	tcps_listendrop;	/* listen queue overflows */
-
-	u_long	tcps_sc_added;		/* entry added to syncache */
-	u_long	tcps_sc_retransmitted;	/* syncache entry was retransmitted */
-	u_long	tcps_sc_dupsyn;		/* duplicate SYN packet */
-	u_long	tcps_sc_dropped;	/* could not reply to packet */
-	u_long	tcps_sc_completed;	/* successful extraction of entry */
-	u_long	tcps_sc_bucketoverflow;	/* syncache per-bucket limit hit */
-	u_long	tcps_sc_cacheoverflow;	/* syncache cache limit hit */
-	u_long	tcps_sc_reset;		/* RST removed entry from syncache */
-	u_long	tcps_sc_stale;		/* timed out or listen socket gone */
-	u_long	tcps_sc_aborted;	/* syncache entry aborted */
-	u_long	tcps_sc_badack;		/* removed due to bad ACK */
-	u_long	tcps_sc_unreach;	/* ICMP unreachable received */
-	u_long	tcps_sc_zonefail;	/* zalloc() failed */
-	u_long	tcps_sc_sendcookie;	/* SYN cookie sent */
-	u_long	tcps_sc_recvcookie;	/* SYN cookie received */
-};
-
-/*
- * TCB structure exported to user-land via sysctl(3).
- * Evil hack: declare only if in_pcb.h and sys/socketvar.h have been
- * included.  Not all of our clients do.
- */
-#if defined(_NETINET_IN_PCB_H_) && defined(_SYS_SOCKETVAR_H_)
-struct	xtcpcb {
-	size_t	xt_len;
-	struct	inpcb	xt_inp;
-	struct	tcpcb	xt_tp;
-	struct	xsocket	xt_socket;
-	u_quad_t	xt_alignment_hack;
-};
-#endif
-
-/*
- * Names for TCP sysctl objects
- */
-#define	TCPCTL_DO_RFC1323	1	/* use RFC-1323 extensions */
-#define	TCPCTL_DO_RFC1644	2	/* use RFC-1644 extensions */
-#define	TCPCTL_MSSDFLT		3	/* MSS default */
-#define TCPCTL_STATS		4	/* statistics (read-only) */
-#define	TCPCTL_RTTDFLT		5	/* default RTT estimate */
-#define	TCPCTL_KEEPIDLE		6	/* keepalive idle timer */
-#define	TCPCTL_KEEPINTVL	7	/* interval to send keepalives */
-#define	TCPCTL_SENDSPACE	8	/* send buffer space */
-#define	TCPCTL_RECVSPACE	9	/* receive buffer space */
-#define	TCPCTL_KEEPINIT		10	/* timeout for establishing syn */
-#define	TCPCTL_PCBLIST		11	/* list of all outstanding PCBs */
-#define	TCPCTL_DELACKTIME	12	/* time before sending delayed ACK */
-#define	TCPCTL_V6MSSDFLT	13	/* MSS default for IPv6 */
-#define	TCPCTL_MAXID		14
-
-#define TCPCTL_NAMES { \
-	{ 0, 0 }, \
-	{ "rfc1323", CTLTYPE_INT }, \
-	{ "rfc1644", CTLTYPE_INT }, \
-	{ "mssdflt", CTLTYPE_INT }, \
-	{ "stats", CTLTYPE_STRUCT }, \
-	{ "rttdflt", CTLTYPE_INT }, \
-	{ "keepidle", CTLTYPE_INT }, \
-	{ "keepintvl", CTLTYPE_INT }, \
-	{ "sendspace", CTLTYPE_INT }, \
-	{ "recvspace", CTLTYPE_INT }, \
-	{ "keepinit", CTLTYPE_INT }, \
-	{ "pcblist", CTLTYPE_STRUCT }, \
-	{ "delacktime", CTLTYPE_INT }, \
-	{ "v6mssdflt", CTLTYPE_INT }, \
-}
-
-
-#ifdef _KERNEL
-#ifdef SYSCTL_DECL
-SYSCTL_DECL(_net_inet_tcp);
-#endif
-
-extern	struct inpcbhead tcb;		/* head of queue of active tcpcb's */
-extern	struct inpcbinfo tcbinfo;
-extern	struct tcpstat tcpstat;	/* tcp statistics */
-extern	int tcp_mssdflt;	/* XXX */
-extern	int tcp_delack_enabled;
-extern	int tcp_do_newreno;
-extern	int ss_fltsz;
-extern	int ss_fltsz_local;
-
-void	 tcp_canceltimers(struct tcpcb *);
-struct tcpcb *
-	 tcp_close(struct tcpcb *);
-void	 tcp_ctlinput(int, struct sockaddr *, void *);
-int	 tcp_ctloutput(struct socket *, struct sockopt *);
-struct tcpcb *
-	 tcp_drop(struct tcpcb *, int);
-void	 tcp_drain(void);
-void	 tcp_fasttimo(void);
-struct rmxp_tao *
-	 tcp_gettaocache(struct in_conninfo *);
-void	 tcp_init(void);
-void	 tcp_input(struct mbuf *, int);
-void	 tcp_mss(struct tcpcb *, int);
-int	 tcp_mssopt(struct tcpcb *);
-void	 tcp_drop_syn_sent(struct inpcb *, int);
-void	 tcp_mtudisc(struct inpcb *, int);
-struct tcpcb *
-	 tcp_newtcpcb(struct inpcb *);
-int	 tcp_output(struct tcpcb *);
-void	 tcp_quench(struct inpcb *, int);
-void	 tcp_respond(struct tcpcb *, void *,
-	    struct tcphdr *, struct mbuf *, tcp_seq, tcp_seq, int);
-struct rtentry *
-	 tcp_rtlookup(struct in_conninfo *);
-void	 tcp_setpersist(struct tcpcb *);
-void	 tcp_slowtimo(void);
-struct tcptemp *
-	 tcp_maketemplate(struct tcpcb *);
-void	 tcp_fillheaders(struct tcpcb *, void *, void *);
-struct tcpcb *
-	 tcp_timers(struct tcpcb *, int);
-void	 tcp_trace(int, int, struct tcpcb *, void *, struct tcphdr *, int);
-void	 syncache_init(void);
-void	 syncache_unreach(struct in_conninfo *, struct tcphdr *);
-int	 syncache_expand(struct in_conninfo *, struct tcphdr *,
-	     struct socket **, struct mbuf *);
-int	 syncache_add(struct in_conninfo *, struct tcpopt *,
-	     struct tcphdr *, struct socket **, struct mbuf *);
-void	 syncache_chkrst(struct in_conninfo *, struct tcphdr *);
-void	 syncache_badack(struct in_conninfo *);
-
-extern	struct pr_usrreqs tcp_usrreqs;
-extern	u_long tcp_sendspace;
-extern	u_long tcp_recvspace;
-tcp_seq tcp_new_isn(struct tcpcb *);
-
-#endif /* _KERNEL */
-
-#endif /* _NETINET_TCP_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet/tcpip.h b/newlib/libc/sys/linux/include/netinet/tcpip.h
deleted file mode 100644
index 53ecb8de0..000000000
--- a/newlib/libc/sys/linux/include/netinet/tcpip.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcpip.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/tcpip.h,v 1.9 2001/02/26 20:10:16 asmodai Exp $
- */
-
-#ifndef _NETINET_TCPIP_H_
-#define _NETINET_TCPIP_H_
-
-/*
- * Tcp+ip header, after ip options removed.
- */
-struct tcpiphdr {
-	struct 	ipovly ti_i;		/* overlaid ip structure */
-	struct	tcphdr ti_t;		/* tcp header */
-};
-#define	ti_x1		ti_i.ih_x1
-#define	ti_pr		ti_i.ih_pr
-#define	ti_len		ti_i.ih_len
-#define	ti_src		ti_i.ih_src
-#define	ti_dst		ti_i.ih_dst
-#define	ti_sport	ti_t.th_sport
-#define	ti_dport	ti_t.th_dport
-#define	ti_seq		ti_t.th_seq
-#define	ti_ack		ti_t.th_ack
-#define	ti_x2		ti_t.th_x2
-#define	ti_off		ti_t.th_off
-#define	ti_flags	ti_t.th_flags
-#define	ti_win		ti_t.th_win
-#define	ti_sum		ti_t.th_sum
-#define	ti_urp		ti_t.th_urp
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/udp.h b/newlib/libc/sys/linux/include/netinet/udp.h
deleted file mode 100644
index 747e76436..000000000
--- a/newlib/libc/sys/linux/include/netinet/udp.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)udp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/udp.h,v 1.7 1999/08/28 00:49:34 peter Exp $
- */
-
-#ifndef _NETINET_UDP_H_
-#define _NETINET_UDP_H_
-
-/*
- * Udp protocol header.
- * Per RFC 768, September, 1981.
- */
-struct udphdr {
-	u_short	uh_sport;		/* source port */
-	u_short	uh_dport;		/* destination port */
-	u_short	uh_ulen;		/* udp length */
-	u_short	uh_sum;			/* udp checksum */
-};
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet/udp_var.h b/newlib/libc/sys/linux/include/netinet/udp_var.h
deleted file mode 100644
index fc00e6e63..000000000
--- a/newlib/libc/sys/linux/include/netinet/udp_var.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)udp_var.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netinet/udp_var.h,v 1.25 2002/03/19 21:25:46 alfred Exp $
- */
-
-#ifndef _NETINET_UDP_VAR_H_
-#define _NETINET_UDP_VAR_H_
-
-/*
- * UDP kernel structures and variables.
- */
-struct	udpiphdr {
-	struct 	ipovly ui_i;		/* overlaid ip structure */
-	struct	udphdr ui_u;		/* udp header */
-};
-#define	ui_x1		ui_i.ih_x1
-#define	ui_pr		ui_i.ih_pr
-#define	ui_len		ui_i.ih_len
-#define	ui_src		ui_i.ih_src
-#define	ui_dst		ui_i.ih_dst
-#define	ui_sport	ui_u.uh_sport
-#define	ui_dport	ui_u.uh_dport
-#define	ui_ulen		ui_u.uh_ulen
-#define	ui_sum		ui_u.uh_sum
-
-struct	udpstat {
-				/* input statistics: */
-	u_long	udps_ipackets;		/* total input packets */
-	u_long	udps_hdrops;		/* packet shorter than header */
-	u_long	udps_badsum;		/* checksum error */
-	u_long	udps_nosum;		/* no checksum */
-	u_long	udps_badlen;		/* data length larger than packet */
-	u_long	udps_noport;		/* no socket on port */
-	u_long	udps_noportbcast;	/* of above, arrived as broadcast */
-	u_long	udps_fullsock;		/* not delivered, input socket full */
-	u_long	udpps_pcbcachemiss;	/* input packets missing pcb cache */
-	u_long	udpps_pcbhashmiss;	/* input packets not for hashed pcb */
-				/* output statistics: */
-	u_long	udps_opackets;		/* total output packets */
-	u_long	udps_fastout;		/* output packets on fast path */
-	/* of no socket on port, arrived as multicast */
-	u_long	udps_noportmcast;
-};
-
-/*
- * Names for UDP sysctl objects
- */
-#define	UDPCTL_CHECKSUM		1	/* checksum UDP packets */
-#define UDPCTL_STATS		2	/* statistics (read-only) */
-#define	UDPCTL_MAXDGRAM		3	/* max datagram size */
-#define	UDPCTL_RECVSPACE	4	/* default receive buffer space */
-#define	UDPCTL_PCBLIST		5	/* list of PCBs for UDP sockets */
-#define UDPCTL_MAXID		6
-
-#define UDPCTL_NAMES { \
-	{ 0, 0 }, \
-	{ "checksum", CTLTYPE_INT }, \
-	{ "stats", CTLTYPE_STRUCT }, \
-	{ "maxdgram", CTLTYPE_INT }, \
-	{ "recvspace", CTLTYPE_INT }, \
-	{ "pcblist", CTLTYPE_STRUCT }, \
-}
-
-#ifdef _KERNEL
-SYSCTL_DECL(_net_inet_udp);
-
-extern struct	pr_usrreqs udp_usrreqs;
-extern struct	inpcbhead udb;
-extern struct	inpcbinfo udbinfo;
-extern u_long	udp_sendspace;
-extern u_long	udp_recvspace;
-extern struct	udpstat udpstat;
-extern int	log_in_vain;
-
-void	udp_ctlinput(int, struct sockaddr *, void *);
-void	udp_init(void);
-void	udp_input(struct mbuf *, int);
-
-void	udp_notify(struct inpcb *inp, int errno);
-int	udp_shutdown(struct socket *so);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet6/ah.h b/newlib/libc/sys/linux/include/netinet6/ah.h
deleted file mode 100644
index ce7c5e824..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ah.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ah.h,v 1.7 2002/04/19 04:46:22 suz Exp $	*/
-/*	$KAME: ah.h,v 1.16 2001/09/04 08:43:19 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC1826/2402 authentication header.
- */
-
-#ifndef _NETINET6_AH_H_
-#define _NETINET6_AH_H_
-
-#if defined(_KERNEL) && !defined(_LKM)
-#include "opt_inet.h"
-#endif
-
-struct ah {
-	u_int8_t	ah_nxt;		/* Next Header */
-	u_int8_t	ah_len;		/* Length of data, in 32bit */
-	u_int16_t	ah_reserve;	/* Reserved for future use */
-	u_int32_t	ah_spi;		/* Security parameter index */
-	/* variable size, 32bit bound*/	/* Authentication data */
-};
-
-struct newah {
-	u_int8_t	ah_nxt;		/* Next Header */
-	u_int8_t	ah_len;		/* Length of data + 1, in 32bit */
-	u_int16_t	ah_reserve;	/* Reserved for future use */
-	u_int32_t	ah_spi;		/* Security parameter index */
-	u_int32_t	ah_seq;		/* Sequence number field */
-	/* variable size, 32bit bound*/	/* Authentication data */
-};
-
-#ifdef _KERNEL
-struct secasvar;
-
-struct ah_algorithm_state {
-	struct secasvar *sav;
-	void* foo;	/* per algorithm data - maybe */
-};
-
-struct ah_algorithm {
-	int (*sumsiz) __P((struct secasvar *));
-	int (*mature) __P((struct secasvar *));
-	int keymin;	/* in bits */
-	int keymax;	/* in bits */
-	const char *name;
-	int (*init) __P((struct ah_algorithm_state *, struct secasvar *));
-	void (*update) __P((struct ah_algorithm_state *, caddr_t, size_t));
-	void (*result) __P((struct ah_algorithm_state *, caddr_t));
-};
-
-#define	AH_MAXSUMSIZE	16
-
-extern const struct ah_algorithm *ah_algorithm_lookup __P((int));
-
-/* cksum routines */
-extern int ah_hdrlen __P((struct secasvar *));
-
-extern size_t ah_hdrsiz __P((struct ipsecrequest *));
-extern void ah4_input __P((struct mbuf *, int));
-extern int ah4_output __P((struct mbuf *, struct ipsecrequest *));
-extern int ah4_calccksum __P((struct mbuf *, caddr_t, size_t,
-	const struct ah_algorithm *, struct secasvar *));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_AH_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ah6.h b/newlib/libc/sys/linux/include/netinet6/ah6.h
deleted file mode 100644
index a2d16d886..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ah6.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ah6.h,v 1.4 2001/06/11 12:39:03 ume Exp $	*/
-/*	$KAME: ah.h,v 1.13 2000/10/18 21:28:00 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC1826/2402 authentication header.
- */
-
-#ifndef _NETINET6_AH6_H_
-#define _NETINET6_AH6_H_
-
-#ifdef _KERNEL
-struct secasvar;
-
-extern int ah6_input __P((struct mbuf **, int *, int));
-extern int ah6_output __P((struct mbuf *, u_char *, struct mbuf *,
-	struct ipsecrequest *));
-extern int ah6_calccksum __P((struct mbuf *, caddr_t, size_t,
-	const struct ah_algorithm *, struct secasvar *));
-
-extern void ah6_ctlinput __P((int, struct sockaddr *, void *));
-#endif
-
-#endif /*_NETINET6_AH6_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet6/esp.h b/newlib/libc/sys/linux/include/netinet6/esp.h
deleted file mode 100644
index 0a22f7a03..000000000
--- a/newlib/libc/sys/linux/include/netinet6/esp.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/esp.h,v 1.6 2002/04/19 04:46:22 suz Exp $	*/
-/*	$KAME: esp.h,v 1.19 2001/09/04 08:43:19 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC1827/2406 Encapsulated Security Payload.
- */
-
-#ifndef _NETINET6_ESP_H_
-#define _NETINET6_ESP_H_
-
-#if defined(_KERNEL) && !defined(_LKM)
-#include "opt_inet.h"
-#endif
-
-struct esp {
-	u_int32_t	esp_spi;	/* ESP */
-	/* variable size, 32bit bound */	/* Initialization Vector */
-	/* variable size */		/* Payload data */
-	/* variable size */		/* padding */
-	/* 8bit */			/* pad size */
-	/* 8bit */			/* next header */
-	/* 8bit */			/* next header */
-	/* variable size, 32bit bound */ /* Authentication data (new IPsec) */
-};
-
-struct newesp {
-	u_int32_t	esp_spi;	/* ESP */
-	u_int32_t	esp_seq;	/* Sequence number */
-	/* variable size */		/* (IV and) Payload data */
-	/* variable size */		/* padding */
-	/* 8bit */			/* pad size */
-	/* 8bit */			/* next header */
-	/* 8bit */			/* next header */
-	/* variable size, 32bit bound *//* Authentication data */
-};
-
-struct esptail {
-	u_int8_t	esp_padlen;	/* pad length */
-	u_int8_t	esp_nxt;	/* Next header */
-	/* variable size, 32bit bound *//* Authentication data (new IPsec)*/
-};
-
-#ifdef _KERNEL
-struct secasvar;
-
-struct esp_algorithm {
-	size_t padbound;	/* pad boundary, in byte */
-	int ivlenval;		/* iv length, in byte */
-	int (*mature) __P((struct secasvar *));
-	int keymin;	/* in bits */
-	int keymax;	/* in bits */
-	int (*schedlen) __P((const struct esp_algorithm *));
-	const char *name;
-	int (*ivlen) __P((const struct esp_algorithm *, struct secasvar *));
-	int (*decrypt) __P((struct mbuf *, size_t,
-		struct secasvar *, const struct esp_algorithm *, int));
-	int (*encrypt) __P((struct mbuf *, size_t, size_t,
-		struct secasvar *, const struct esp_algorithm *, int));
-	/* not supposed to be called directly */
-	int (*schedule) __P((const struct esp_algorithm *, struct secasvar *));
-	int (*blockdecrypt) __P((const struct esp_algorithm *,
-		struct secasvar *, u_int8_t *, u_int8_t *));
-	int (*blockencrypt) __P((const struct esp_algorithm *,
-		struct secasvar *, u_int8_t *, u_int8_t *));
-};
-
-extern const struct esp_algorithm *esp_algorithm_lookup __P((int));
-extern int esp_max_ivlen __P((void));
-
-/* crypt routines */
-extern int esp4_output __P((struct mbuf *, struct ipsecrequest *));
-extern void esp4_input __P((struct mbuf *, int));
-extern size_t esp_hdrsiz __P((struct ipsecrequest *));
-
-extern int esp_schedule __P((const struct esp_algorithm *, struct secasvar *));
-extern int esp_auth __P((struct mbuf *, size_t, size_t,
-	struct secasvar *, u_char *));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_ESP_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/esp6.h b/newlib/libc/sys/linux/include/netinet6/esp6.h
deleted file mode 100644
index 933fe2ac7..000000000
--- a/newlib/libc/sys/linux/include/netinet6/esp6.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/esp6.h,v 1.4 2001/06/11 12:39:04 ume Exp $	*/
-/*	$KAME: esp.h,v 1.16 2000/10/18 21:28:00 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC1827/2406 Encapsulated Security Payload.
- */
-
-#ifndef _NETINET6_ESP6_H_
-#define _NETINET6_ESP6_H_
-
-#ifdef _KERNEL
-extern int esp6_output __P((struct mbuf *, u_char *, struct mbuf *,
-	struct ipsecrequest *));
-extern int esp6_input __P((struct mbuf **, int *, int));
-
-extern void esp6_ctlinput __P((int, struct sockaddr *, void *));
-#endif /*_KERNEL*/
-
-#endif /*_NETINET6_ESP6_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet6/esp_rijndael.h b/newlib/libc/sys/linux/include/netinet6/esp_rijndael.h
deleted file mode 100644
index 8c7d44e0f..000000000
--- a/newlib/libc/sys/linux/include/netinet6/esp_rijndael.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/esp_rijndael.h,v 1.1 2001/06/11 12:39:05 ume Exp $	*/
-/*	$KAME: esp_rijndael.h,v 1.1 2000/09/20 18:15:22 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-int esp_rijndael_schedlen __P((const struct esp_algorithm *));
-int esp_rijndael_schedule __P((const struct esp_algorithm *,
-	struct secasvar *));
-int esp_rijndael_blockdecrypt __P((const struct esp_algorithm *,
-	struct secasvar *, u_int8_t *, u_int8_t *));
-int esp_rijndael_blockencrypt __P((const struct esp_algorithm *,
-	struct secasvar *, u_int8_t *, u_int8_t *));
diff --git a/newlib/libc/sys/linux/include/netinet6/icmp6.h b/newlib/libc/sys/linux/include/netinet6/icmp6.h
deleted file mode 100644
index 300b8aca2..000000000
--- a/newlib/libc/sys/linux/include/netinet6/icmp6.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/icmp6.h,v 1.6 2000/07/04 16:35:09 itojun Exp $	*/
-/*	$KAME: icmp6.h,v 1.17 2000/06/11 17:23:40 jinmei Exp $	*/
-
-#error "netinet6/icmp6.h is obsolete.  use netinet/icmp6.h"
diff --git a/newlib/libc/sys/linux/include/netinet6/in6.h b/newlib/libc/sys/linux/include/netinet6/in6.h
deleted file mode 100644
index e4d1c1cf2..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6.h
+++ /dev/null
@@ -1,651 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6.h,v 1.19 2002/04/19 04:46:22 suz Exp $	*/
-/*	$KAME: in6.h,v 1.89 2001/05/27 13:28:35 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1982, 1986, 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in.h	8.3 (Berkeley) 1/3/94
- */
-
-#ifndef __KAME_NETINET_IN_H_INCLUDED_
-#error "do not include netinet6/in6.h directly, include netinet/in.h.  see RFC2553"
-#endif
-
-#ifndef _NETINET6_IN6_H_
-#define _NETINET6_IN6_H_
-
-#include <sys/types.h>
-
-/*
- * Identification of the network protocol stack
- * for *BSD-current/release: http://www.kame.net/dev/cvsweb.cgi/kame/COVERAGE
- * has the table of implementation/integration differences.
- */
-#define __KAME__
-#define __KAME_VERSION		"20010528/FreeBSD"
-
-/*
- * Local port number conventions:
- *
- * Ports < IPPORT_RESERVED are reserved for privileged processes (e.g. root),
- * unless a kernel is compiled with IPNOPRIVPORTS defined.
- *
- * When a user does a bind(2) or connect(2) with a port number of zero,
- * a non-conflicting local port address is chosen.
- *
- * The default range is IPPORT_ANONMIN to IPPORT_ANONMAX, although
- * that is settable by sysctl(3); net.inet.ip.anonportmin and
- * net.inet.ip.anonportmax respectively.
- *
- * A user may set the IPPROTO_IP option IP_PORTRANGE to change this
- * default assignment range.
- *
- * The value IP_PORTRANGE_DEFAULT causes the default behavior.
- *
- * The value IP_PORTRANGE_HIGH is the same as IP_PORTRANGE_DEFAULT,
- * and exists only for FreeBSD compatibility purposes.
- *
- * The value IP_PORTRANGE_LOW changes the range to the "low" are
- * that is (by convention) restricted to privileged processes.
- * This convention is based on "vouchsafe" principles only.
- * It is only secure if you trust the remote host to restrict these ports.
- * The range is IPPORT_RESERVEDMIN to IPPORT_RESERVEDMAX.
- */
-
-#define	IPV6PORT_RESERVED	1024
-#define	IPV6PORT_ANONMIN	49152
-#define	IPV6PORT_ANONMAX	65535
-#define	IPV6PORT_RESERVEDMIN	600
-#define	IPV6PORT_RESERVEDMAX	(IPV6PORT_RESERVED-1)
-
-/*
- * IPv6 address
- */
-struct in6_addr {
-	union {
-		uint8_t   __u6_addr8[16];
-		uint16_t  __u6_addr16[8];
-		uint32_t  __u6_addr32[4];
-	} __u6_addr;			/* 128-bit IP6 address */
-};
-
-#define s6_addr   __u6_addr.__u6_addr8
-#ifdef _KERNEL	/* XXX nonstandard */
-#define s6_addr8  __u6_addr.__u6_addr8
-#define s6_addr16 __u6_addr.__u6_addr16
-#define s6_addr32 __u6_addr.__u6_addr32
-#endif
-
-#define INET6_ADDRSTRLEN	46
-
-/*
- * Socket address for IPv6
- */
-#ifndef _XOPEN_SOURCE
-#define SIN6_LEN
-#endif
-struct sockaddr_in6 {
-	uint8_t	sin6_family;	/* AF_INET6 (sa_family_t) */
-	uint16_t	sin6_port;	/* Transport layer port # (in_port_t)*/
-	uint32_t	sin6_flowinfo;	/* IP6 flow information */
-	struct in6_addr	sin6_addr;	/* IP6 address */
-	uint32_t	sin6_scope_id;	/* scope zone index */
-};
-
-/*
- * Local definition for masks
- */
-#ifdef _KERNEL	/* XXX nonstandard */
-#define IN6MASK0	{{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}}
-#define IN6MASK32	{{{ 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, \
-			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
-#define IN6MASK64	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
-			    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
-#define IN6MASK96	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
-			    0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 }}}
-#define IN6MASK128	{{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
-			    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}}
-#endif
-
-#ifdef _KERNEL
-extern const struct sockaddr_in6 sa6_any;
-
-extern const struct in6_addr in6mask0;
-extern const struct in6_addr in6mask32;
-extern const struct in6_addr in6mask64;
-extern const struct in6_addr in6mask96;
-extern const struct in6_addr in6mask128;
-#endif /* _KERNEL */
-
-/*
- * Macros started with IPV6_ADDR is KAME local
- */
-#ifdef _KERNEL	/* XXX nonstandard */
-#if BYTE_ORDER == BIG_ENDIAN
-#define IPV6_ADDR_INT32_ONE	1
-#define IPV6_ADDR_INT32_TWO	2
-#define IPV6_ADDR_INT32_MNL	0xff010000
-#define IPV6_ADDR_INT32_MLL	0xff020000
-#define IPV6_ADDR_INT32_SMP	0x0000ffff
-#define IPV6_ADDR_INT16_ULL	0xfe80
-#define IPV6_ADDR_INT16_USL	0xfec0
-#define IPV6_ADDR_INT16_MLL	0xff02
-#elif BYTE_ORDER == LITTLE_ENDIAN
-#define IPV6_ADDR_INT32_ONE	0x01000000
-#define IPV6_ADDR_INT32_TWO	0x02000000
-#define IPV6_ADDR_INT32_MNL	0x000001ff
-#define IPV6_ADDR_INT32_MLL	0x000002ff
-#define IPV6_ADDR_INT32_SMP	0xffff0000
-#define IPV6_ADDR_INT16_ULL	0x80fe
-#define IPV6_ADDR_INT16_USL	0xc0fe
-#define IPV6_ADDR_INT16_MLL	0x02ff
-#endif
-#endif
-
-/*
- * Definition of some useful macros to handle IP6 addresses
- */
-#define IN6ADDR_ANY_INIT \
-	{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
-	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
-#define IN6ADDR_LOOPBACK_INIT \
-	{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
-	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
-#define IN6ADDR_NODELOCAL_ALLNODES_INIT \
-	{{{ 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
-	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
-#define IN6ADDR_LINKLOCAL_ALLNODES_INIT \
-	{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
-	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
-#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
-	{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
-	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02 }}}
-
-extern const struct in6_addr in6addr_any;
-extern const struct in6_addr in6addr_loopback;
-extern const struct in6_addr in6addr_nodelocal_allnodes;
-extern const struct in6_addr in6addr_linklocal_allnodes;
-extern const struct in6_addr in6addr_linklocal_allrouters;
-
-/*
- * Equality
- * NOTE: Some of kernel programming environment (for example, openbsd/sparc)
- * does not supply memcmp().  For userland memcmp() is preferred as it is
- * in ANSI standard.
- */
-#ifdef _KERNEL
-#define IN6_ARE_ADDR_EQUAL(a, b)			\
-    (bcmp(&(a)->s6_addr[0], &(b)->s6_addr[0], sizeof(struct in6_addr)) == 0)
-#else
-#define IN6_ARE_ADDR_EQUAL(a, b)			\
-    (memcmp(&(a)->s6_addr[0], &(b)->s6_addr[0], sizeof(struct in6_addr)) == 0)
-#endif
-
-#ifdef _KERNEL			/* non standard */
-/* see if two addresses are equal in a scope-conscious manner. */
-#define SA6_ARE_ADDR_EQUAL(a, b) \
-	(((a)->sin6_scope_id == 0 || (b)->sin6_scope_id == 0 || \
-	  ((a)->sin6_scope_id == (b)->sin6_scope_id)) && \
-	 (bcmp(&(a)->sin6_addr, &(b)->sin6_addr, sizeof(struct in6_addr)) == 0))
-#endif
-
-/*
- * Unspecified
- */
-#define IN6_IS_ADDR_UNSPECIFIED(a)	\
-	((*(const uint32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[12]) == 0))
-
-/*
- * Loopback
- */
-#define IN6_IS_ADDR_LOOPBACK(a)		\
-	((*(const uint32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[12]) == ntohl(1)))
-
-/*
- * IPv4 compatible
- */
-#define IN6_IS_ADDR_V4COMPAT(a)		\
-	((*(const uint32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[8]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[12]) != 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[12]) != ntohl(1)))
-
-/*
- * Mapped
- */
-#define IN6_IS_ADDR_V4MAPPED(a)		      \
-	((*(const uint32_t *)(const void *)(&(a)->s6_addr[0]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[4]) == 0) &&	\
-	 (*(const uint32_t *)(const void *)(&(a)->s6_addr[8]) == ntohl(0x0000ffff)))
-
-/*
- * KAME Scope Values
- */
-
-#ifdef _KERNEL	/* XXX nonstandard */
-#define IPV6_ADDR_SCOPE_NODELOCAL	0x01
-#define IPV6_ADDR_SCOPE_LINKLOCAL	0x02
-#define IPV6_ADDR_SCOPE_SITELOCAL	0x05
-#define IPV6_ADDR_SCOPE_ORGLOCAL	0x08	/* just used in this file */
-#define IPV6_ADDR_SCOPE_GLOBAL		0x0e
-#else
-#define __IPV6_ADDR_SCOPE_NODELOCAL	0x01
-#define __IPV6_ADDR_SCOPE_LINKLOCAL	0x02
-#define __IPV6_ADDR_SCOPE_SITELOCAL	0x05
-#define __IPV6_ADDR_SCOPE_ORGLOCAL	0x08	/* just used in this file */
-#define __IPV6_ADDR_SCOPE_GLOBAL	0x0e
-#endif
-
-/*
- * Unicast Scope
- * Note that we must check topmost 10 bits only, not 16 bits (see RFC2373).
- */
-#define IN6_IS_ADDR_LINKLOCAL(a)	\
-	(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0x80))
-#define IN6_IS_ADDR_SITELOCAL(a)	\
-	(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0xc0))
-
-/*
- * Multicast
- */
-#define IN6_IS_ADDR_MULTICAST(a)	((a)->s6_addr[0] == 0xff)
-
-#ifdef _KERNEL	/* XXX nonstandard */
-#define IPV6_ADDR_MC_SCOPE(a)		((a)->s6_addr[1] & 0x0f)
-#else
-#define __IPV6_ADDR_MC_SCOPE(a)		((a)->s6_addr[1] & 0x0f)
-#endif
-
-/*
- * Multicast Scope
- */
-#ifdef _KERNEL	/* refers nonstandard items */
-#define IN6_IS_ADDR_MC_NODELOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_NODELOCAL))
-#define IN6_IS_ADDR_MC_LINKLOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_LINKLOCAL))
-#define IN6_IS_ADDR_MC_SITELOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) && 	\
-	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_SITELOCAL))
-#define IN6_IS_ADDR_MC_ORGLOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_ORGLOCAL))
-#define IN6_IS_ADDR_MC_GLOBAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_GLOBAL))
-#else
-#define IN6_IS_ADDR_MC_NODELOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_NODELOCAL))
-#define IN6_IS_ADDR_MC_LINKLOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_LINKLOCAL))
-#define IN6_IS_ADDR_MC_SITELOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) && 	\
-	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_SITELOCAL))
-#define IN6_IS_ADDR_MC_ORGLOCAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_ORGLOCAL))
-#define IN6_IS_ADDR_MC_GLOBAL(a)	\
-	(IN6_IS_ADDR_MULTICAST(a) &&	\
-	 (__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_GLOBAL))
-#endif
-
-#ifdef _KERNEL	/* nonstandard */
-/*
- * KAME Scope
- */
-#define IN6_IS_SCOPE_LINKLOCAL(a)	\
-	((IN6_IS_ADDR_LINKLOCAL(a)) ||	\
-	 (IN6_IS_ADDR_MC_LINKLOCAL(a)))
-
-#define IFA6_IS_DEPRECATED(a) \
-	((a)->ia6_lifetime.ia6t_preferred != 0 && \
-	 (a)->ia6_lifetime.ia6t_preferred < time_second)
-#define IFA6_IS_INVALID(a) \
-	((a)->ia6_lifetime.ia6t_expire != 0 && \
-	 (a)->ia6_lifetime.ia6t_expire < time_second)
-#endif /* _KERNEL */
-
-/*
- * IP6 route structure
- */
-#ifndef _XOPEN_SOURCE
-struct route_in6 {
-	struct	rtentry *ro_rt;
-	struct	sockaddr_in6 ro_dst;
-};
-#endif
-
-/*
- * Options for use with [gs]etsockopt at the IPV6 level.
- * First word of comment is data type; bool is stored in int.
- */
-/* no hdrincl */
-#if 0 /* the followings are relic in IPv4 and hence are disabled */
-#define IPV6_OPTIONS		1  /* buf/ip6_opts; set/get IP6 options */
-#define IPV6_RECVOPTS		5  /* bool; receive all IP6 opts w/dgram */
-#define IPV6_RECVRETOPTS	6  /* bool; receive IP6 opts for response */
-#define IPV6_RECVDSTADDR	7  /* bool; receive IP6 dst addr w/dgram */
-#define IPV6_RETOPTS		8  /* ip6_opts; set/get IP6 options */
-#endif
-#define IPV6_SOCKOPT_RESERVED1	3  /* reserved for future use */
-#define IPV6_UNICAST_HOPS	4  /* int; IP6 hops */
-#define IPV6_MULTICAST_IF	9  /* u_char; set/get IP6 multicast i/f  */
-#define IPV6_MULTICAST_HOPS	10 /* u_char; set/get IP6 multicast hops */
-#define IPV6_MULTICAST_LOOP	11 /* u_char; set/get IP6 multicast loopback */
-#define IPV6_JOIN_GROUP		12 /* ip6_mreq; join a group membership */
-#define IPV6_LEAVE_GROUP	13 /* ip6_mreq; leave a group membership */
-#define IPV6_PORTRANGE		14 /* int; range to choose for unspec port */
-#define ICMP6_FILTER		18 /* icmp6_filter; icmp6 filter */
-/* RFC2292 options */
-#define IPV6_PKTINFO		19 /* bool; send/recv if, src/dst addr */
-#define IPV6_HOPLIMIT		20 /* bool; hop limit */
-#define IPV6_NEXTHOP		21 /* bool; next hop addr */
-#define IPV6_HOPOPTS		22 /* bool; hop-by-hop option */
-#define IPV6_DSTOPTS		23 /* bool; destination option */
-#define IPV6_RTHDR		24 /* bool; routing header */
-#define IPV6_PKTOPTIONS		25 /* buf/cmsghdr; set/get IPv6 options */
-
-#define IPV6_CHECKSUM		26 /* int; checksum offset for raw socket */
-#define IPV6_V6ONLY		27 /* bool; only bind INET6 at wildcard bind */
-#ifndef _KERNEL
-#define IPV6_BINDV6ONLY		IPV6_V6ONLY
-#endif
-
-#if 1 /* IPSEC */
-#define IPV6_IPSEC_POLICY	28 /* struct; get/set security policy */
-#endif
-#define IPV6_FAITH		29 /* bool; accept FAITH'ed connections */
-
-#if 1 /* IPV6FIREWALL */
-#define IPV6_FW_ADD		30 /* add a firewall rule to chain */
-#define IPV6_FW_DEL		31 /* delete a firewall rule from chain */
-#define IPV6_FW_FLUSH		32 /* flush firewall rule chain */
-#define IPV6_FW_ZERO		33 /* clear single/all firewall counter(s) */
-#define IPV6_FW_GET		34 /* get entire firewall rule chain */
-#endif
-
-/* to define items, should talk with KAME guys first, for *BSD compatibility */
-
-#define IPV6_RTHDR_LOOSE     0 /* this hop need not be a neighbor. XXX old spec */
-#define IPV6_RTHDR_STRICT    1 /* this hop must be a neighbor. XXX old spec */
-#define IPV6_RTHDR_TYPE_0    0 /* IPv6 routing header type 0 */
-
-/*
- * Defaults and limits for options
- */
-#define IPV6_DEFAULT_MULTICAST_HOPS 1	/* normally limit m'casts to 1 hop */
-#define IPV6_DEFAULT_MULTICAST_LOOP 1	/* normally hear sends if a member */
-
-/*
- * Argument structure for IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP.
- */
-struct ipv6_mreq {
-	struct in6_addr	ipv6mr_multiaddr;
-	unsigned int	ipv6mr_interface;
-};
-
-/*
- * IPV6_PKTINFO: Packet information(RFC2292 sec 5)
- */
-struct in6_pktinfo {
-	struct in6_addr	ipi6_addr;	/* src/dst IPv6 address */
-	unsigned int	ipi6_ifindex;	/* send/recv interface index */
-};
-
-/*
- * Argument for IPV6_PORTRANGE:
- * - which range to search when port is unspecified at bind() or connect()
- */
-#define	IPV6_PORTRANGE_DEFAULT	0	/* default range */
-#define	IPV6_PORTRANGE_HIGH	1	/* "high" - request firewall bypass */
-#define	IPV6_PORTRANGE_LOW	2	/* "low" - vouchsafe security */
-
-#ifndef _XOPEN_SOURCE
-/*
- * Definitions for inet6 sysctl operations.
- *
- * Third level is protocol number.
- * Fourth level is desired variable within that protocol.
- */
-#define IPV6PROTO_MAXID	(IPPROTO_PIM + 1)	/* don't list to IPV6PROTO_MAX */
-
-#define CTL_IPV6PROTO_NAMES { \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, \
-	{ "tcp6", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "udp6", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, \
-	{ "ip6", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, \
-	{ "ipsec6", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "icmp6", CTLTYPE_NODE }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "pim6", CTLTYPE_NODE }, \
-}
-
-/*
- * Names for IP sysctl objects
- */
-#define IPV6CTL_FORWARDING	1	/* act as router */
-#define IPV6CTL_SENDREDIRECTS	2	/* may send redirects when forwarding*/
-#define IPV6CTL_DEFHLIM		3	/* default Hop-Limit */
-#ifdef notyet
-#define IPV6CTL_DEFMTU		4	/* default MTU */
-#endif
-#define IPV6CTL_FORWSRCRT	5	/* forward source-routed dgrams */
-#define IPV6CTL_STATS		6	/* stats */
-#define IPV6CTL_MRTSTATS	7	/* multicast forwarding stats */
-#define IPV6CTL_MRTPROTO	8	/* multicast routing protocol */
-#define IPV6CTL_MAXFRAGPACKETS	9	/* max packets reassembly queue */
-#define IPV6CTL_SOURCECHECK	10	/* verify source route and intf */
-#define IPV6CTL_SOURCECHECK_LOGINT 11	/* minimume logging interval */
-#define IPV6CTL_ACCEPT_RTADV	12
-#define IPV6CTL_KEEPFAITH	13
-#define IPV6CTL_LOG_INTERVAL	14
-#define IPV6CTL_HDRNESTLIMIT	15
-#define IPV6CTL_DAD_COUNT	16
-#define IPV6CTL_AUTO_FLOWLABEL	17
-#define IPV6CTL_DEFMCASTHLIM	18
-#define IPV6CTL_GIF_HLIM	19	/* default HLIM for gif encap packet */
-#define IPV6CTL_KAME_VERSION	20
-#define IPV6CTL_USE_DEPRECATED	21	/* use deprecated addr (RFC2462 5.5.4) */
-#define IPV6CTL_RR_PRUNE	22	/* walk timer for router renumbering */
-#if 0	/* obsolete */
-#define IPV6CTL_MAPPED_ADDR	23
-#endif
-#define IPV6CTL_V6ONLY		24
-#define IPV6CTL_RTEXPIRE	25	/* cloned route expiration time */
-#define IPV6CTL_RTMINEXPIRE	26	/* min value for expiration time */
-#define IPV6CTL_RTMAXCACHE	27	/* trigger level for dynamic expire */
-
-#define IPV6CTL_USETEMPADDR	32	/* use temporary addresses (RFC3041) */
-#define IPV6CTL_TEMPPLTIME	33	/* preferred lifetime for tmpaddrs */
-#define IPV6CTL_TEMPVLTIME	34	/* valid lifetime for tmpaddrs */
-#define IPV6CTL_AUTO_LINKLOCAL	35	/* automatic link-local addr assign */
-#define IPV6CTL_RIP6STATS	36	/* raw_ip6 stats */
-
-/* New entries should be added here from current IPV6CTL_MAXID value. */
-/* to define items, should talk with KAME guys first, for *BSD compatibility */
-#define IPV6CTL_MAXID		37
-
-#endif /* !_XOPEN_SOURCE */
-
-/*
- * Redefinition of mbuf flags
- */
-#define	M_AUTHIPHDR	M_PROTO2
-#define	M_DECRYPTED	M_PROTO3
-#define	M_LOOP		M_PROTO4
-#define	M_AUTHIPDGM	M_PROTO5
-
-#ifdef _KERNEL
-struct cmsghdr;
-
-int	in6_cksum __P((struct mbuf *, uint8_t, uint32_t, uint32_t));
-int	in6_localaddr __P((struct in6_addr *));
-int	in6_addrscope __P((struct in6_addr *));
-struct	in6_ifaddr *in6_ifawithscope __P((struct ifnet *, struct in6_addr *));
-struct	in6_ifaddr *in6_ifawithifp __P((struct ifnet *, struct in6_addr *));
-extern void in6_if_up __P((struct ifnet *));
-struct sockaddr;
-extern	u_char	ip6_protox[];
-
-void	in6_sin6_2_sin __P((struct sockaddr_in *sin,
-			    struct sockaddr_in6 *sin6));
-void	in6_sin_2_v4mapsin6 __P((struct sockaddr_in *sin,
-				 struct sockaddr_in6 *sin6));
-void	in6_sin6_2_sin_in_sock __P((struct sockaddr *nam));
-void	in6_sin_2_v4mapsin6_in_sock __P((struct sockaddr **nam));
-
-#define	satosin6(sa)	((struct sockaddr_in6 *)(sa))
-#define	sin6tosa(sin6)	((struct sockaddr *)(sin6))
-#define	ifatoia6(ifa)	((struct in6_ifaddr *)(ifa))
-
-extern int	(*faithprefix_p)(struct in6_addr *);
-#endif /* _KERNEL */
-
-__BEGIN_DECLS
-struct cmsghdr;
-
-extern int inet6_option_space __P((int));
-extern int inet6_option_init __P((void *, struct cmsghdr **, int));
-extern int inet6_option_append __P((struct cmsghdr *, const uint8_t *,
-	int, int));
-extern uint8_t *inet6_option_alloc __P((struct cmsghdr *, int, int, int));
-extern int inet6_option_next __P((const struct cmsghdr *, uint8_t **));
-extern int inet6_option_find __P((const struct cmsghdr *, uint8_t **, int));
-
-extern size_t inet6_rthdr_space __P((int, int));
-extern struct cmsghdr *inet6_rthdr_init __P((void *, int));
-extern int inet6_rthdr_add __P((struct cmsghdr *, const struct in6_addr *,
-		unsigned int));
-extern int inet6_rthdr_lasthop __P((struct cmsghdr *, unsigned int));
-#if 0 /* not implemented yet */
-extern int inet6_rthdr_reverse __P((const struct cmsghdr *, struct cmsghdr *));
-#endif
-extern int inet6_rthdr_segments __P((const struct cmsghdr *));
-extern struct in6_addr *inet6_rthdr_getaddr __P((struct cmsghdr *, int));
-extern int inet6_rthdr_getflags __P((const struct cmsghdr *, int));
-
-extern int inet6_opt_init __P((void *, size_t));
-extern int inet6_opt_append __P((void *, size_t, int, uint8_t,
-				 size_t, uint8_t, void **));
-extern int inet6_opt_finish __P((void *, size_t, int));
-extern int inet6_opt_set_val __P((void *, size_t, void *, int));
-
-extern int inet6_opt_next __P((void *, size_t, int, uint8_t *,
-			       size_t *, void **));
-extern int inet6_opt_find __P((void *, size_t, int, uint8_t,
-			  size_t *, void **));
-extern int inet6_opt_get_val __P((void *, size_t, void *, int));
-extern size_t inet6_rth_space __P((int, int));
-extern void *inet6_rth_init __P((void *, int, int, int));
-extern int inet6_rth_add __P((void *, const struct in6_addr *));
-extern int inet6_rth_reverse __P((const void *, void *));
-extern int inet6_rth_segments __P((const void *));
-extern struct in6_addr *inet6_rth_getaddr __P((const void *, int));
-__END_DECLS
-
-#endif /* !_NETINET6_IN6_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/in6_gif.h b/newlib/libc/sys/linux/include/netinet6/in6_gif.h
deleted file mode 100644
index cd0db9b1e..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6_gif.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6_gif.h,v 1.3 2000/07/04 16:35:09 itojun Exp $	*/
-/*	$KAME: in6_gif.h,v 1.5 2000/04/14 08:36:03 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_IN6_GIF_H_
-#define _NETINET6_IN6_GIF_H_
-
-#define GIF_HLIM	30
-
-int in6_gif_input __P((struct mbuf **, int *, int));
-int in6_gif_output __P((struct ifnet *, int, struct mbuf *, struct rtentry *));
-int gif_encapcheck6 __P((const struct mbuf *, int, int, void *));
-
-#endif /*_NETINET6_IN6_GIF_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet6/in6_ifattach.h b/newlib/libc/sys/linux/include/netinet6/in6_ifattach.h
deleted file mode 100644
index 90229e4f7..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6_ifattach.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6_ifattach.h,v 1.3 2001/06/11 12:39:05 ume Exp $	*/
-/*	$KAME: in6_ifattach.h,v 1.14 2001/02/08 12:48:39 jinmei Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_IN6_IFATTACH_H_
-#define _NETINET6_IN6_IFATTACH_H_
-
-#ifdef _KERNEL
-void in6_nigroup_attach __P((const char *, int));
-void in6_nigroup_detach __P((const char *, int));
-void in6_ifattach __P((struct ifnet *, struct ifnet *));
-void in6_ifdetach __P((struct ifnet *));
-void in6_get_tmpifid __P((struct ifnet *, u_int8_t *, const u_int8_t *, int));
-void in6_tmpaddrtimer __P((void *));
-int in6_nigroup __P((struct ifnet *, const char *, int, struct in6_addr *));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_IN6_IFATTACH_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/in6_pcb.h b/newlib/libc/sys/linux/include/netinet6/in6_pcb.h
deleted file mode 100644
index c47c6c739..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6_pcb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6_pcb.h,v 1.7 2002/02/27 02:44:45 alfred Exp $	*/
-/*	$KAME: in6_pcb.h,v 1.13 2001/02/06 09:16:53 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-
-/*
- * Copyright (c) 1982, 1986, 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in_pcb.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET6_IN6_PCB_H_
-#define	_NETINET6_IN6_PCB_H_
-
-#ifdef _KERNEL
-#define	satosin6(sa)	((struct sockaddr_in6 *)(sa))
-#define	sin6tosa(sin6)	((struct sockaddr *)(sin6))
-#define	ifatoia6(ifa)	((struct in6_ifaddr *)(ifa))
-
-void	in6_pcbpurgeif0 __P((struct in6pcb *, struct ifnet *));
-void	in6_losing __P((struct inpcb *));
-int	in6_pcballoc __P((struct socket *, struct inpcbinfo *, struct thread *));
-int	in6_pcbbind __P((struct inpcb *, struct sockaddr *, struct thread *));
-int	in6_pcbconnect __P((struct inpcb *, struct sockaddr *, struct thread *));
-void	in6_pcbdetach __P((struct inpcb *));
-void	in6_pcbdisconnect __P((struct inpcb *));
-int	in6_pcbladdr __P((struct inpcb *, struct sockaddr *,
-			  struct in6_addr **));
-struct	inpcb *
-	in6_pcblookup_local __P((struct inpcbinfo *,
-				 struct in6_addr *, u_int, int));
-struct	inpcb *
-	in6_pcblookup_hash __P((struct inpcbinfo *,
-				struct in6_addr *, u_int, struct in6_addr *,
-				u_int, int, struct ifnet *));
-void	in6_pcbnotify __P((struct inpcbhead *, struct sockaddr *,
-			   u_int, const struct sockaddr *, u_int, int,
-			   void (*)(struct inpcb *, int)));
-void	in6_rtchange __P((struct inpcb *, int));
-int	in6_setpeeraddr __P((struct socket *so, struct sockaddr **nam));
-int	in6_setsockaddr __P((struct socket *so, struct sockaddr **nam));
-int	in6_mapped_sockaddr __P((struct socket *so, struct sockaddr **nam));
-int	in6_mapped_peeraddr __P((struct socket *so, struct sockaddr **nam));
-struct	in6_addr *in6_selectsrc __P((struct sockaddr_in6 *,
-				     struct ip6_pktopts *,
-				     struct ip6_moptions *,
-				     struct route_in6 *,
-				     struct in6_addr *, int *));
-int	in6_selecthlim __P((struct in6pcb *, struct ifnet *));
-int	in6_pcbsetport __P((struct in6_addr *, struct inpcb *, struct thread *));
-void	init_sin6 __P((struct sockaddr_in6 *sin6, struct mbuf *m));
-#endif /* _KERNEL */
-
-#endif /* !_NETINET6_IN6_PCB_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/in6_prefix.h b/newlib/libc/sys/linux/include/netinet6/in6_prefix.h
deleted file mode 100644
index 6b2c5205d..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6_prefix.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6_prefix.h,v 1.5 2001/06/11 12:39:05 ume Exp $	*/
-/*	$KAME: in6_prefix.h,v 1.10 2001/02/08 16:30:30 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, 1998 and 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/callout.h>
-
-struct rr_prefix {
-	struct ifprefix	rp_ifpr;
-	LIST_ENTRY(rr_prefix) rp_entry;
-	LIST_HEAD(rp_addrhead, rp_addr) rp_addrhead;
-	struct sockaddr_in6 rp_prefix;	/* prefix */
-	u_int32_t rp_vltime;	/* advertised valid lifetime */
-	u_int32_t rp_pltime;	/* advertised preferred lifetime */
-	time_t rp_expire;	/* expiration time of the prefix */
-	time_t rp_preferred;	/* preferred time of the prefix */
-	struct in6_prflags rp_flags;
-	u_char	rp_origin; /* from where this prefix info is obtained */
-	struct	rp_stateflags {
-		/* if some prefix should be added to this prefix */
-		u_char addmark : 1;
-		u_char delmark : 1; /* if this prefix will be deleted */
-	} rp_stateflags;
-};
-
-#define rp_type		rp_ifpr.ifpr_type
-#define rp_ifp		rp_ifpr.ifpr_ifp
-#define rp_plen		rp_ifpr.ifpr_plen
-
-#define rp_raf		rp_flags.prf_ra
-#define rp_raf_onlink		rp_flags.prf_ra.onlink
-#define rp_raf_auto		rp_flags.prf_ra.autonomous
-
-#define rp_statef_addmark	rp_stateflags.addmark
-#define rp_statef_delmark	rp_stateflags.delmark
-
-#define rp_rrf		rp_flags.prf_rr
-#define rp_rrf_decrvalid	rp_flags.prf_rr.decrvalid
-#define rp_rrf_decrprefd	rp_flags.prf_rr.decrprefd
-
-struct rp_addr {
-	LIST_ENTRY(rp_addr)	ra_entry;
-	struct in6_addr		ra_ifid;
-	struct in6_ifaddr	*ra_addr;
-	struct ra_flags {
-		u_char anycast : 1;
-	} ra_flags;
-};
-
-#define ifpr2rp(ifpr)	((struct rr_prefix *)(ifpr))
-#define rp2ifpr(rp)	((struct ifprefix *)(rp))
-
-#define RP_IN6(rp)	(&(rp)->rp_prefix.sin6_addr)
-
-#define RR_INFINITE_LIFETIME		0xffffffff
-
-
-LIST_HEAD(rr_prhead, rr_prefix);
-
-extern struct rr_prhead rr_prefix;
-
-void in6_rr_timer __P((void *));
-extern struct callout in6_rr_timer_ch;
-int delete_each_prefix  __P((struct rr_prefix *rpp, u_char origin));
diff --git a/newlib/libc/sys/linux/include/netinet6/in6_var.h b/newlib/libc/sys/linux/include/netinet6/in6_var.h
deleted file mode 100644
index 7ddfbdb7c..000000000
--- a/newlib/libc/sys/linux/include/netinet6/in6_var.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/in6_var.h,v 1.10 2002/04/19 04:46:22 suz Exp $	*/
-/*	$KAME: in6_var.h,v 1.56 2001/03/29 05:34:31 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1985, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)in_var.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET6_IN6_VAR_H_
-#define _NETINET6_IN6_VAR_H_
-
-/*
- * Interface address, Internet version.  One of these structures
- * is allocated for each interface with an Internet address.
- * The ifaddr structure contains the protocol-independent part
- * of the structure and is assumed to be first.
- */
-
-/*
- * pltime/vltime are just for future reference (required to implements 2
- * hour rule for hosts).  they should never be modified by nd6_timeout or
- * anywhere else.
- *	userland -> kernel: accept pltime/vltime
- *	kernel -> userland: throw up everything
- *	in kernel: modify preferred/expire only
- */
-struct in6_addrlifetime {
-	time_t ia6t_expire;	/* valid lifetime expiration time */
-	time_t ia6t_preferred;	/* preferred lifetime expiration time */
-	u_int32_t ia6t_vltime;	/* valid lifetime */
-	u_int32_t ia6t_pltime;	/* prefix lifetime */
-};
-
-struct	in6_ifaddr {
-	struct	ifaddr ia_ifa;		/* protocol-independent info */
-#define	ia_ifp		ia_ifa.ifa_ifp
-#define ia_flags	ia_ifa.ifa_flags
-	struct	sockaddr_in6 ia_addr;	/* interface address */
-	struct	sockaddr_in6 ia_net;	/* network number of interface */
-	struct	sockaddr_in6 ia_dstaddr; /* space for destination addr */
-	struct	sockaddr_in6 ia_prefixmask; /* prefix mask */
-	u_int32_t ia_plen;		/* prefix length */
-	struct	in6_ifaddr *ia_next;	/* next in6 list of IP6 addresses */
-	int	ia6_flags;
-
-	struct in6_addrlifetime ia6_lifetime;
-	struct ifprefix *ia6_ifpr; /* back pointer to ifprefix */
-
-	struct nd_prefix *ia6_ndpr; /* back pointer to the ND prefix
-				     * (for autoconfigured addresses only)
-				     */
-};
-
-/*
- * IPv6 interface statistics, as defined in RFC2465 Ipv6IfStatsEntry (p12).
- */
-struct in6_ifstat {
-	u_quad_t ifs6_in_receive;	/* # of total input datagram */
-	u_quad_t ifs6_in_hdrerr;	/* # of datagrams with invalid hdr */
-	u_quad_t ifs6_in_toobig;	/* # of datagrams exceeded MTU */
-	u_quad_t ifs6_in_noroute;	/* # of datagrams with no route */
-	u_quad_t ifs6_in_addrerr;	/* # of datagrams with invalid dst */
-	u_quad_t ifs6_in_protounknown;	/* # of datagrams with unknown proto */
-					/* NOTE: increment on final dst if */
-	u_quad_t ifs6_in_truncated;	/* # of truncated datagrams */
-	u_quad_t ifs6_in_discard;	/* # of discarded datagrams */
-					/* NOTE: fragment timeout is not here */
-	u_quad_t ifs6_in_deliver;	/* # of datagrams delivered to ULP */
-					/* NOTE: increment on final dst if */
-	u_quad_t ifs6_out_forward;	/* # of datagrams forwarded */
-					/* NOTE: increment on outgoing if */
-	u_quad_t ifs6_out_request;	/* # of outgoing datagrams from ULP */
-					/* NOTE: does not include forwrads */
-	u_quad_t ifs6_out_discard;	/* # of discarded datagrams */
-	u_quad_t ifs6_out_fragok;	/* # of datagrams fragmented */
-	u_quad_t ifs6_out_fragfail;	/* # of datagrams failed on fragment */
-	u_quad_t ifs6_out_fragcreat;	/* # of fragment datagrams */
-					/* NOTE: this is # after fragment */
-	u_quad_t ifs6_reass_reqd;	/* # of incoming fragmented packets */
-					/* NOTE: increment on final dst if */
-	u_quad_t ifs6_reass_ok;		/* # of reassembled packets */
-					/* NOTE: this is # after reass */
-					/* NOTE: increment on final dst if */
-	u_quad_t ifs6_reass_fail;	/* # of reass failures */
-					/* NOTE: may not be packet count */
-					/* NOTE: increment on final dst if */
-	u_quad_t ifs6_in_mcast;		/* # of inbound multicast datagrams */
-	u_quad_t ifs6_out_mcast;	/* # of outbound multicast datagrams */
-};
-
-/*
- * ICMPv6 interface statistics, as defined in RFC2466 Ipv6IfIcmpEntry.
- * XXX: I'm not sure if this file is the right place for this structure...
- */
-struct icmp6_ifstat {
-	/*
-	 * Input statistics
-	 */
-	/* ipv6IfIcmpInMsgs, total # of input messages */
-	u_quad_t ifs6_in_msg;
-	/* ipv6IfIcmpInErrors, # of input error messages */
-	u_quad_t ifs6_in_error;
-	/* ipv6IfIcmpInDestUnreachs, # of input dest unreach errors */
-	u_quad_t ifs6_in_dstunreach;
-	/* ipv6IfIcmpInAdminProhibs, # of input administratively prohibited errs */
-	u_quad_t ifs6_in_adminprohib;
-	/* ipv6IfIcmpInTimeExcds, # of input time exceeded errors */
-	u_quad_t ifs6_in_timeexceed;
-	/* ipv6IfIcmpInParmProblems, # of input parameter problem errors */
-	u_quad_t ifs6_in_paramprob;
-	/* ipv6IfIcmpInPktTooBigs, # of input packet too big errors */
-	u_quad_t ifs6_in_pkttoobig;
-	/* ipv6IfIcmpInEchos, # of input echo requests */
-	u_quad_t ifs6_in_echo;
-	/* ipv6IfIcmpInEchoReplies, # of input echo replies */
-	u_quad_t ifs6_in_echoreply;
-	/* ipv6IfIcmpInRouterSolicits, # of input router solicitations */
-	u_quad_t ifs6_in_routersolicit;
-	/* ipv6IfIcmpInRouterAdvertisements, # of input router advertisements */
-	u_quad_t ifs6_in_routeradvert;
-	/* ipv6IfIcmpInNeighborSolicits, # of input neighbor solicitations */
-	u_quad_t ifs6_in_neighborsolicit;
-	/* ipv6IfIcmpInNeighborAdvertisements, # of input neighbor advertisements */
-	u_quad_t ifs6_in_neighboradvert;
-	/* ipv6IfIcmpInRedirects, # of input redirects */
-	u_quad_t ifs6_in_redirect;
-	/* ipv6IfIcmpInGroupMembQueries, # of input MLD queries */
-	u_quad_t ifs6_in_mldquery;
-	/* ipv6IfIcmpInGroupMembResponses, # of input MLD reports */
-	u_quad_t ifs6_in_mldreport;
-	/* ipv6IfIcmpInGroupMembReductions, # of input MLD done */
-	u_quad_t ifs6_in_mlddone;
-
-	/*
-	 * Output statistics. We should solve unresolved routing problem...
-	 */
-	/* ipv6IfIcmpOutMsgs, total # of output messages */
-	u_quad_t ifs6_out_msg;
-	/* ipv6IfIcmpOutErrors, # of output error messages */
-	u_quad_t ifs6_out_error;
-	/* ipv6IfIcmpOutDestUnreachs, # of output dest unreach errors */
-	u_quad_t ifs6_out_dstunreach;
-	/* ipv6IfIcmpOutAdminProhibs, # of output administratively prohibited errs */
-	u_quad_t ifs6_out_adminprohib;
-	/* ipv6IfIcmpOutTimeExcds, # of output time exceeded errors */
-	u_quad_t ifs6_out_timeexceed;
-	/* ipv6IfIcmpOutParmProblems, # of output parameter problem errors */
-	u_quad_t ifs6_out_paramprob;
-	/* ipv6IfIcmpOutPktTooBigs, # of output packet too big errors */
-	u_quad_t ifs6_out_pkttoobig;
-	/* ipv6IfIcmpOutEchos, # of output echo requests */
-	u_quad_t ifs6_out_echo;
-	/* ipv6IfIcmpOutEchoReplies, # of output echo replies */
-	u_quad_t ifs6_out_echoreply;
-	/* ipv6IfIcmpOutRouterSolicits, # of output router solicitations */
-	u_quad_t ifs6_out_routersolicit;
-	/* ipv6IfIcmpOutRouterAdvertisements, # of output router advertisements */
-	u_quad_t ifs6_out_routeradvert;
-	/* ipv6IfIcmpOutNeighborSolicits, # of output neighbor solicitations */
-	u_quad_t ifs6_out_neighborsolicit;
-	/* ipv6IfIcmpOutNeighborAdvertisements, # of output neighbor advertisements */
-	u_quad_t ifs6_out_neighboradvert;
-	/* ipv6IfIcmpOutRedirects, # of output redirects */
-	u_quad_t ifs6_out_redirect;
-	/* ipv6IfIcmpOutGroupMembQueries, # of output MLD queries */
-	u_quad_t ifs6_out_mldquery;
-	/* ipv6IfIcmpOutGroupMembResponses, # of output MLD reports */
-	u_quad_t ifs6_out_mldreport;
-	/* ipv6IfIcmpOutGroupMembReductions, # of output MLD done */
-	u_quad_t ifs6_out_mlddone;
-};
-
-struct	in6_ifreq {
-	char	ifr_name[IFNAMSIZ];
-	union {
-		struct	sockaddr_in6 ifru_addr;
-		struct	sockaddr_in6 ifru_dstaddr;
-		short	ifru_flags;
-		int	ifru_flags6;
-		int	ifru_metric;
-		caddr_t	ifru_data;
-		struct in6_addrlifetime ifru_lifetime;
-		struct in6_ifstat ifru_stat;
-		struct icmp6_ifstat ifru_icmp6stat;
-		u_int32_t ifru_scope_id[16];
-	} ifr_ifru;
-};
-
-struct	in6_aliasreq {
-	char	ifra_name[IFNAMSIZ];
-	struct	sockaddr_in6 ifra_addr;
-	struct	sockaddr_in6 ifra_dstaddr;
-	struct	sockaddr_in6 ifra_prefixmask;
-	int	ifra_flags;
-	struct in6_addrlifetime ifra_lifetime;
-};
-
-/* prefix type macro */
-#define IN6_PREFIX_ND	1
-#define IN6_PREFIX_RR	2
-
-/*
- * prefix related flags passed between kernel(NDP related part) and
- * user land command(ifconfig) and daemon(rtadvd).
- */
-struct in6_prflags {
-	struct prf_ra {
-		u_char onlink : 1;
-		u_char autonomous : 1;
-		u_char reserved : 6;
-	} prf_ra;
-	u_char prf_reserved1;
-	u_short prf_reserved2;
-	/* want to put this on 4byte offset */
-	struct prf_rr {
-		u_char decrvalid : 1;
-		u_char decrprefd : 1;
-		u_char reserved : 6;
-	} prf_rr;
-	u_char prf_reserved3;
-	u_short prf_reserved4;
-};
-
-struct  in6_prefixreq {
-	char	ipr_name[IFNAMSIZ];
-	u_char	ipr_origin;
-	u_char	ipr_plen;
-	u_int32_t ipr_vltime;
-	u_int32_t ipr_pltime;
-	struct in6_prflags ipr_flags;
-	struct	sockaddr_in6 ipr_prefix;
-};
-
-#define PR_ORIG_RA	0
-#define PR_ORIG_RR	1
-#define PR_ORIG_STATIC	2
-#define PR_ORIG_KERNEL	3
-
-#define ipr_raf_onlink		ipr_flags.prf_ra.onlink
-#define ipr_raf_auto		ipr_flags.prf_ra.autonomous
-
-#define ipr_statef_onlink	ipr_flags.prf_state.onlink
-
-#define ipr_rrf_decrvalid	ipr_flags.prf_rr.decrvalid
-#define ipr_rrf_decrprefd	ipr_flags.prf_rr.decrprefd
-
-struct	in6_rrenumreq {
-	char	irr_name[IFNAMSIZ];
-	u_char	irr_origin;
-	u_char	irr_m_len;	/* match len for matchprefix */
-	u_char	irr_m_minlen;	/* minlen for matching prefix */
-	u_char	irr_m_maxlen;	/* maxlen for matching prefix */
-	u_char	irr_u_uselen;	/* uselen for adding prefix */
-	u_char	irr_u_keeplen;	/* keeplen from matching prefix */
-	struct irr_raflagmask {
-		u_char onlink : 1;
-		u_char autonomous : 1;
-		u_char reserved : 6;
-	} irr_raflagmask;
-	u_int32_t irr_vltime;
-	u_int32_t irr_pltime;
-	struct in6_prflags irr_flags;
-	struct	sockaddr_in6 irr_matchprefix;
-	struct	sockaddr_in6 irr_useprefix;
-};
-
-#define irr_raf_mask_onlink	irr_raflagmask.onlink
-#define irr_raf_mask_auto	irr_raflagmask.autonomous
-#define irr_raf_mask_reserved	irr_raflagmask.reserved
-
-#define irr_raf_onlink		irr_flags.prf_ra.onlink
-#define irr_raf_auto		irr_flags.prf_ra.autonomous
-
-#define irr_statef_onlink	irr_flags.prf_state.onlink
-
-#define irr_rrf			irr_flags.prf_rr
-#define irr_rrf_decrvalid	irr_flags.prf_rr.decrvalid
-#define irr_rrf_decrprefd	irr_flags.prf_rr.decrprefd
-
-/*
- * Given a pointer to an in6_ifaddr (ifaddr),
- * return a pointer to the addr as a sockaddr_in6
- */
-#define IA6_IN6(ia)	(&((ia)->ia_addr.sin6_addr))
-#define IA6_DSTIN6(ia)	(&((ia)->ia_dstaddr.sin6_addr))
-#define IA6_MASKIN6(ia)	(&((ia)->ia_prefixmask.sin6_addr))
-#define IA6_SIN6(ia)	(&((ia)->ia_addr))
-#define IA6_DSTSIN6(ia)	(&((ia)->ia_dstaddr))
-#define IFA_IN6(x)	(&((struct sockaddr_in6 *)((x)->ifa_addr))->sin6_addr)
-#define IFA_DSTIN6(x)	(&((struct sockaddr_in6 *)((x)->ifa_dstaddr))->sin6_addr)
-
-#define IFPR_IN6(x)	(&((struct sockaddr_in6 *)((x)->ifpr_prefix))->sin6_addr)
-
-#ifdef _KERNEL
-#define IN6_ARE_MASKED_ADDR_EQUAL(d, a, m)	(	\
-	(((d)->s6_addr32[0] ^ (a)->s6_addr32[0]) & (m)->s6_addr32[0]) == 0 && \
-	(((d)->s6_addr32[1] ^ (a)->s6_addr32[1]) & (m)->s6_addr32[1]) == 0 && \
-	(((d)->s6_addr32[2] ^ (a)->s6_addr32[2]) & (m)->s6_addr32[2]) == 0 && \
-	(((d)->s6_addr32[3] ^ (a)->s6_addr32[3]) & (m)->s6_addr32[3]) == 0 )
-#endif
-
-#define SIOCSIFADDR_IN6		 _IOW('i', 12, struct in6_ifreq)
-#define SIOCGIFADDR_IN6		_IOWR('i', 33, struct in6_ifreq)
-
-#ifdef _KERNEL
-/*
- * SIOCSxxx ioctls should be unused (see comments in in6.c), but
- * we do not shift numbers for binary compatibility.
- */
-#define SIOCSIFDSTADDR_IN6	 _IOW('i', 14, struct in6_ifreq)
-#define SIOCSIFNETMASK_IN6	 _IOW('i', 22, struct in6_ifreq)
-#endif
-
-#define SIOCGIFDSTADDR_IN6	_IOWR('i', 34, struct in6_ifreq)
-#define SIOCGIFNETMASK_IN6	_IOWR('i', 37, struct in6_ifreq)
-
-#define SIOCDIFADDR_IN6		 _IOW('i', 25, struct in6_ifreq)
-#define SIOCAIFADDR_IN6		 _IOW('i', 26, struct in6_aliasreq)
-
-#define SIOCSIFPHYADDR_IN6       _IOW('i', 70, struct in6_aliasreq)
-#define	SIOCGIFPSRCADDR_IN6	_IOWR('i', 71, struct in6_ifreq)
-#define	SIOCGIFPDSTADDR_IN6	_IOWR('i', 72, struct in6_ifreq)
-
-#define SIOCGIFAFLAG_IN6	_IOWR('i', 73, struct in6_ifreq)
-
-#define SIOCGDRLST_IN6		_IOWR('i', 74, struct in6_drlist)
-#define SIOCGPRLST_IN6		_IOWR('i', 75, struct in6_prlist)
-#ifdef _KERNEL
-#define OSIOCGIFINFO_IN6	_IOWR('i', 76, struct in6_ondireq)
-#endif
-#define SIOCGIFINFO_IN6		_IOWR('i', 108, struct in6_ndireq)
-#define SIOCSNDFLUSH_IN6	_IOWR('i', 77, struct in6_ifreq)
-#define SIOCGNBRINFO_IN6	_IOWR('i', 78, struct in6_nbrinfo)
-#define SIOCSPFXFLUSH_IN6	_IOWR('i', 79, struct in6_ifreq)
-#define SIOCSRTRFLUSH_IN6	_IOWR('i', 80, struct in6_ifreq)
-
-#define SIOCGIFALIFETIME_IN6	_IOWR('i', 81, struct in6_ifreq)
-#define SIOCSIFALIFETIME_IN6	_IOWR('i', 82, struct in6_ifreq)
-#define SIOCGIFSTAT_IN6		_IOWR('i', 83, struct in6_ifreq)
-#define SIOCGIFSTAT_ICMP6	_IOWR('i', 84, struct in6_ifreq)
-
-#define SIOCSDEFIFACE_IN6	_IOWR('i', 85, struct in6_ndifreq)
-#define SIOCGDEFIFACE_IN6	_IOWR('i', 86, struct in6_ndifreq)
-
-#define SIOCSIFINFO_FLAGS	_IOWR('i', 87, struct in6_ndireq) /* XXX */
-
-#define SIOCSSCOPE6		_IOW('i', 88, struct in6_ifreq)
-#define SIOCGSCOPE6		_IOWR('i', 89, struct in6_ifreq)
-#define SIOCGSCOPE6DEF		_IOWR('i', 90, struct in6_ifreq)
-
-#define SIOCSIFPREFIX_IN6	_IOW('i', 100, struct in6_prefixreq) /* set */
-#define SIOCGIFPREFIX_IN6	_IOWR('i', 101, struct in6_prefixreq) /* get */
-#define SIOCDIFPREFIX_IN6	_IOW('i', 102, struct in6_prefixreq) /* del */
-#define SIOCAIFPREFIX_IN6	_IOW('i', 103, struct in6_rrenumreq) /* add */
-#define SIOCCIFPREFIX_IN6	_IOW('i', 104, \
-				     struct in6_rrenumreq) /* change */
-#define SIOCSGIFPREFIX_IN6	_IOW('i', 105, \
-				     struct in6_rrenumreq) /* set global */
-
-#define SIOCGETSGCNT_IN6	_IOWR('u', 106, \
-				      struct sioc_sg_req6) /* get s,g pkt cnt */
-#define SIOCGETMIFCNT_IN6	_IOWR('u', 107, \
-				      struct sioc_mif_req6) /* get pkt cnt per if */
-
-#define IN6_IFF_ANYCAST		0x01	/* anycast address */
-#define IN6_IFF_TENTATIVE	0x02	/* tentative address */
-#define IN6_IFF_DUPLICATED	0x04	/* DAD detected duplicate */
-#define IN6_IFF_DETACHED	0x08	/* may be detached from the link */
-#define IN6_IFF_DEPRECATED	0x10	/* deprecated address */
-#define IN6_IFF_NODAD		0x20	/* don't perform DAD on this address
-					 * (used only at first SIOC* call)
-					 */
-#define IN6_IFF_AUTOCONF	0x40	/* autoconfigurable address. */
-#define IN6_IFF_TEMPORARY	0x80	/* temporary (anonymous) address. */
-#define IN6_IFF_NOPFX		0x8000	/* skip kernel prefix management.
-					 * XXX: this should be temporary.
-					 */
-
-/* do not input/output */
-#define IN6_IFF_NOTREADY (IN6_IFF_TENTATIVE|IN6_IFF_DUPLICATED)
-
-#ifdef _KERNEL
-#define IN6_ARE_SCOPE_CMP(a,b) ((a)-(b))
-#define IN6_ARE_SCOPE_EQUAL(a,b) ((a)==(b))
-#endif
-
-#ifdef _KERNEL
-extern struct in6_ifaddr *in6_ifaddr;
-
-extern struct in6_ifstat **in6_ifstat;
-extern size_t in6_ifstatmax;
-extern struct icmp6stat icmp6stat;
-extern struct icmp6_ifstat **icmp6_ifstat;
-extern size_t icmp6_ifstatmax;
-#define in6_ifstat_inc(ifp, tag) \
-do {								\
-	if ((ifp) && (ifp)->if_index <= if_index		\
-	 && (ifp)->if_index < in6_ifstatmax			\
-	 && in6_ifstat && in6_ifstat[(ifp)->if_index]) {	\
-		in6_ifstat[(ifp)->if_index]->tag++;		\
-	}							\
-} while (0)
-
-extern struct ifqueue ip6intrq;		/* IP6 packet input queue */
-extern struct in6_addr zeroin6_addr;
-extern u_char inet6ctlerrmap[];
-extern unsigned long in6_maxmtu;
-#ifdef MALLOC_DECLARE
-MALLOC_DECLARE(M_IPMADDR);
-#endif
-
-/*
- * Macro for finding the internet address structure (in6_ifaddr) corresponding
- * to a given interface (ifnet structure).
- */
-
-#define IFP_TO_IA6(ifp, ia)				\
-/* struct ifnet *ifp; */				\
-/* struct in6_ifaddr *ia; */				\
-do {									\
-	struct ifaddr *ifa;						\
-	for (ifa = (ifp)->if_addrlist.tqh_first; ifa; ifa = ifa->ifa_list.tqe_next) {	\
-		if (!ifa->ifa_addr)					\
-			continue;					\
-		if (ifa->ifa_addr->sa_family == AF_INET6)		\
-			break;						\
-	}								\
-	(ia) = (struct in6_ifaddr *)ifa;				\
-} while (0)
-
-#endif /* _KERNEL */
-
-/*
- * Multi-cast membership entry.  One for each group/ifp that a PCB
- * belongs to.
- */
-struct in6_multi_mship {
-	struct	in6_multi *i6mm_maddr;	/* Multicast address pointer */
-	LIST_ENTRY(in6_multi_mship) i6mm_chain;  /* multicast options chain */
-};
-
-struct	in6_multi {
-	LIST_ENTRY(in6_multi) in6m_entry; /* list glue */
-	struct	in6_addr in6m_addr;	/* IP6 multicast address */
-	struct	ifnet *in6m_ifp;	/* back pointer to ifnet */
-	struct	ifmultiaddr *in6m_ifma;	/* back pointer to ifmultiaddr */
-	u_int	in6m_refcount;		/* # membership claims by sockets */
-	u_int	in6m_state;		/* state of the membership */
-	u_int	in6m_timer;		/* MLD6 listener report timer */
-};
-
-#ifdef _KERNEL
-extern LIST_HEAD(in6_multihead, in6_multi) in6_multihead;
-
-/*
- * Structure used by macros below to remember position when stepping through
- * all of the in6_multi records.
- */
-struct	in6_multistep {
-	struct	in6_ifaddr *i_ia;
-	struct	in6_multi *i_in6m;
-};
-
-/*
- * Macros for looking up the in6_multi record for a given IP6 multicast
- * address on a given interface. If no matching record is found, "in6m"
- * returns NLL.
- */
-
-#define IN6_LOOKUP_MULTI(addr, ifp, in6m)			\
-/* struct in6_addr addr; */					\
-/* struct ifnet *ifp; */					\
-/* struct in6_multi *in6m; */					\
-do { \
-	struct ifmultiaddr *ifma; \
-	TAILQ_FOREACH(ifma, &(ifp)->if_multiaddrs, ifma_link) { \
-		if (ifma->ifma_addr->sa_family == AF_INET6 \
-		    && IN6_ARE_ADDR_EQUAL(&((struct sockaddr_in6 *)ifma->ifma_addr)->sin6_addr, \
-					  &(addr))) \
-			break; \
-	} \
-	(in6m) = (struct in6_multi *)(ifma ? ifma->ifma_protospec : 0); \
-} while(0)
-
-/*
- * Macro to step through all of the in6_multi records, one at a time.
- * The current position is remembered in "step", which the caller must
- * provide.  IN6_FIRST_MULTI(), below, must be called to initialize "step"
- * and get the first record.  Both macros return a NULL "in6m" when there
- * are no remaining records.
- */
-#define IN6_NEXT_MULTI(step, in6m)					\
-/* struct in6_multistep step; */					\
-/* struct in6_multi *in6m; */						\
-do { \
-	if (((in6m) = (step).i_in6m) != NULL) \
-		(step).i_in6m = (step).i_in6m->in6m_entry.le_next; \
-} while(0)
-
-#define IN6_FIRST_MULTI(step, in6m)		\
-/* struct in6_multistep step; */		\
-/* struct in6_multi *in6m */			\
-do { \
-	(step).i_in6m = in6_multihead.lh_first; \
-		IN6_NEXT_MULTI((step), (in6m)); \
-} while(0)
-
-struct	in6_multi *in6_addmulti __P((struct in6_addr *, struct ifnet *,
-				     int *));
-void	in6_delmulti __P((struct in6_multi *));
-extern int in6_ifindex2scopeid __P((int));
-extern int in6_mask2len __P((struct in6_addr *, u_char *));
-extern void in6_len2mask __P((struct in6_addr *, int));
-int	in6_control __P((struct socket *,
-			 u_long, caddr_t, struct ifnet *, struct thread *));
-int	in6_update_ifa __P((struct ifnet *, struct in6_aliasreq *,
-			    struct in6_ifaddr *));
-void	in6_purgeaddr __P((struct ifaddr *));
-int	in6if_do_dad __P((struct ifnet *));
-void	in6_purgeif __P((struct ifnet *));
-void	in6_savemkludge __P((struct in6_ifaddr *));
-void	in6_setmaxmtu   __P((void));
-void	in6_restoremkludge __P((struct in6_ifaddr *, struct ifnet *));
-void	in6_purgemkludge __P((struct ifnet *));
-struct in6_ifaddr *in6ifa_ifpforlinklocal __P((struct ifnet *, int));
-struct in6_ifaddr *in6ifa_ifpwithaddr __P((struct ifnet *,
-					     struct in6_addr *));
-char	*ip6_sprintf __P((const struct in6_addr *));
-int	in6_addr2scopeid __P((struct ifnet *, struct in6_addr *));
-int	in6_matchlen __P((struct in6_addr *, struct in6_addr *));
-int	in6_are_prefix_equal __P((struct in6_addr *p1, struct in6_addr *p2,
-				  int len));
-void	in6_prefixlen2mask __P((struct in6_addr *maskp, int len));
-int	in6_prefix_ioctl __P((struct socket *so, u_long cmd, caddr_t data,
-			      struct ifnet *ifp));
-int	in6_prefix_add_ifid __P((int iilen, struct in6_ifaddr *ia));
-void	in6_prefix_remove_ifid __P((int iilen, struct in6_ifaddr *ia));
-void	in6_purgeprefix __P((struct ifnet *));
-
-int	in6_is_addr_deprecated __P((struct sockaddr_in6 *));
-struct inpcb;
-int in6_embedscope __P((struct in6_addr *, const struct sockaddr_in6 *,
-	struct inpcb *, struct ifnet **));
-int in6_recoverscope __P((struct sockaddr_in6 *, const struct in6_addr *,
-	struct ifnet *));
-void in6_clearscope __P((struct in6_addr *));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_IN6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6.h b/newlib/libc/sys/linux/include/netinet6/ip6.h
deleted file mode 100644
index 528ff7ce3..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6.h,v 1.5 2000/07/04 16:35:09 itojun Exp $	*/
-/*	$KAME: ip6.h,v 1.7 2000/03/25 07:23:36 sumikawa Exp $	*/
-
-#error "netinet6/ip6.h is obsolete.  use netinet/ip6.h"
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6_ecn.h b/newlib/libc/sys/linux/include/netinet6/ip6_ecn.h
deleted file mode 100644
index f7b762d5f..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6_ecn.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6_ecn.h,v 1.4 2001/06/11 12:39:05 ume Exp $	*/
-/*	$KAME: ip_ecn.h,v 1.5 2000/03/27 04:58:38 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-/*
- * ECN consideration on tunnel ingress/egress operation.
- * http://www.aciri.org/floyd/papers/draft-ipsec-ecn-00.txt
- */
-
-#ifdef _KERNEL
-extern void ip6_ecn_ingress __P((int, u_int32_t *, const u_int32_t *));
-extern void ip6_ecn_egress __P((int, const u_int32_t *, u_int32_t *));
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6_fw.h b/newlib/libc/sys/linux/include/netinet6/ip6_fw.h
deleted file mode 100644
index ee3aa818f..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6_fw.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6_fw.h,v 1.12 2002/04/19 04:46:22 suz Exp $	*/
-/*	$KAME: ip6_fw.h,v 1.9 2001/08/01 04:29:57 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1998, 1999, 2000 and 2001 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1993 Daniel Boulet
- * Copyright (c) 1994 Ugen J.S.Antsilevich
- *
- * Redistribution and use in source forms, with and without modification,
- * are permitted provided that this entire comment appears intact.
- *
- * Redistribution in binary form may occur without any restrictions.
- * Obviously, it would be nice if you gave credit where credit is due
- * but requiring it would be too onerous.
- *
- * This software is provided ``AS IS'' without any warranties of any kind.
- *
- */
-
-#ifndef _IP6_FW_H
-#define _IP6_FW_H
-
-#include <net/if.h>
-
-/*
- * This union structure identifies an interface, either explicitly
- * by name or implicitly by IP address. The flags IP_FW_F_IIFNAME
- * and IP_FW_F_OIFNAME say how to interpret this structure. An
- * interface unit number of -1 matches any unit number, while an
- * IP address of 0.0.0.0 indicates matches any interface.
- *
- * The receive and transmit interfaces are only compared against the
- * the packet if the corresponding bit (IP_FW_F_IIFACE or IP_FW_F_OIFACE)
- * is set. Note some packets lack a receive or transmit interface
- * (in which case the missing "interface" never matches).
- */
-
-union ip6_fw_if {
-    struct in6_addr fu_via_ip6;	/* Specified by IPv6 address */
-    struct {			/* Specified by interface name */
-#define IP6FW_IFNLEN     IFNAMSIZ
-	    char  name[IP6FW_IFNLEN];
-	    short unit;		/* -1 means match any unit */
-    } fu_via_if;
-};
-
-/*
- * Format of an IP firewall descriptor
- *
- * fw_src, fw_dst, fw_smsk, fw_dmsk are always stored in network byte order.
- * fw_flg and fw_n*p are stored in host byte order (of course).
- * Port numbers are stored in HOST byte order.
- * Warning: setsockopt() will fail if sizeof(struct ip_fw) > MLEN (108)
- */
-
-struct ip6_fw {
-    u_long fw_pcnt,fw_bcnt;		/* Packet and byte counters */
-    struct in6_addr fw_src, fw_dst;	/* Source and destination IPv6 addr */
-    struct in6_addr fw_smsk, fw_dmsk;	/* Mask for src and dest IPv6 addr */
-    u_short fw_number;			/* Rule number */
-    u_short fw_flg;			/* Flags word */
-#define IPV6_FW_MAX_PORTS	10	/* A reasonable maximum */
-    u_int fw_ipflg;			/* IP flags word */
-    u_short fw_pts[IPV6_FW_MAX_PORTS];	/* Array of port numbers to match */
-    u_char fw_ip6opt,fw_ip6nopt;	/* IPv6 options set/unset */
-    u_char fw_tcpf,fw_tcpnf;		/* TCP flags set/unset */
-#define IPV6_FW_ICMPTYPES_DIM (256 / (sizeof(unsigned) * 8))
-    unsigned fw_icmp6types[IPV6_FW_ICMPTYPES_DIM]; /* ICMP types bitmap */
-    long timestamp;			/* timestamp (tv_sec) of last match */
-    union ip6_fw_if fw_in_if, fw_out_if;/* Incoming and outgoing interfaces */
-    union {
-	u_short fu_divert_port;		/* Divert/tee port (options IP6DIVERT) */
-	u_short fu_skipto_rule;		/* SKIPTO command rule number */
-	u_short fu_reject_code;		/* REJECT response code */
-    } fw_un;
-    u_char fw_prot;			/* IPv6 protocol */
-    u_char fw_nports;			/* N'of src ports and # of dst ports */
-					/* in ports array (dst ports follow */
-					/* src ports; max of 10 ports in all; */
-					/* count of 0 means match all ports) */
-};
-
-#define IPV6_FW_GETNSRCP(rule)		((rule)->fw_nports & 0x0f)
-#define IPV6_FW_SETNSRCP(rule, n)		do {				\
-					  (rule)->fw_nports &= ~0x0f;	\
-					  (rule)->fw_nports |= (n);	\
-					} while (0)
-#define IPV6_FW_GETNDSTP(rule)		((rule)->fw_nports >> 4)
-#define IPV6_FW_SETNDSTP(rule, n)		do {				\
-					  (rule)->fw_nports &= ~0xf0;	\
-					  (rule)->fw_nports |= (n) << 4;\
-					} while (0)
-
-#define fw_divert_port	fw_un.fu_divert_port
-#define fw_skipto_rule	fw_un.fu_skipto_rule
-#define fw_reject_code	fw_un.fu_reject_code
-
-struct ip6_fw_chain {
-        LIST_ENTRY(ip6_fw_chain) chain;
-        struct ip6_fw    *rule;
-};
-
-/*
- * Values for "flags" field .
- */
-#define IPV6_FW_F_IN	0x0001	/* Check inbound packets		*/
-#define IPV6_FW_F_OUT	0x0002	/* Check outbound packets		*/
-#define IPV6_FW_F_IIFACE	0x0004	/* Apply inbound interface test		*/
-#define IPV6_FW_F_OIFACE	0x0008	/* Apply outbound interface test	*/
-
-#define IPV6_FW_F_COMMAND 0x0070	/* Mask for type of chain entry:	*/
-#define IPV6_FW_F_DENY	0x0000	/* This is a deny rule			*/
-#define IPV6_FW_F_REJECT	0x0010	/* Deny and send a response packet	*/
-#define IPV6_FW_F_ACCEPT	0x0020	/* This is an accept rule		*/
-#define IPV6_FW_F_COUNT	0x0030	/* This is a count rule			*/
-#define IPV6_FW_F_DIVERT	0x0040	/* This is a divert rule		*/
-#define IPV6_FW_F_TEE	0x0050	/* This is a tee rule			*/
-#define IPV6_FW_F_SKIPTO	0x0060	/* This is a skipto rule		*/
-
-#define IPV6_FW_F_PRN	0x0080	/* Print if this rule matches		*/
-
-#define IPV6_FW_F_SRNG	0x0100	/* The first two src ports are a min	*
-				 * and max range (stored in host byte	*
-				 * order).				*/
-
-#define IPV6_FW_F_DRNG	0x0200	/* The first two dst ports are a min	*
-				 * and max range (stored in host byte	*
-				 * order).				*/
-
-#define IPV6_FW_F_IIFNAME	0x0400	/* In interface by name/unit (not IP)	*/
-#define IPV6_FW_F_OIFNAME	0x0800	/* Out interface by name/unit (not IP)	*/
-
-#define IPV6_FW_F_INVSRC	0x1000	/* Invert sense of src check		*/
-#define IPV6_FW_F_INVDST	0x2000	/* Invert sense of dst check		*/
-
-#define IPV6_FW_F_FRAG	0x4000	/* Fragment				*/
-
-#define IPV6_FW_F_ICMPBIT 0x8000	/* ICMP type bitmap is valid		*/
-
-#define IPV6_FW_F_MASK	0xFFFF	/* All possible flag bits mask		*/
-
-/* 
- * Flags for the 'fw_ipflg' field, for comparing values of ip and its protocols. */
-#define	IPV6_FW_IF_TCPEST 0x00000020	/* established TCP connection	*/
-#define IPV6_FW_IF_TCPMSK 0x00000020	/* mask of all TCP values */
-
-/*
- * For backwards compatibility with rules specifying "via iface" but
- * not restricted to only "in" or "out" packets, we define this combination
- * of bits to represent this configuration.
- */
-
-#define IF6_FW_F_VIAHACK	(IPV6_FW_F_IN|IPV6_FW_F_OUT|IPV6_FW_F_IIFACE|IPV6_FW_F_OIFACE)
-
-/*
- * Definitions for REJECT response codes.
- * Values less than 256 correspond to ICMP unreachable codes.
- */
-#define IPV6_FW_REJECT_RST	0x0100		/* TCP packets: send RST */
-
-/*
- * Definitions for IPv6 option names.
- */
-#define IPV6_FW_IP6OPT_HOPOPT	0x01
-#define IPV6_FW_IP6OPT_ROUTE	0x02
-#define IPV6_FW_IP6OPT_FRAG	0x04
-#define IPV6_FW_IP6OPT_ESP	0x08
-#define IPV6_FW_IP6OPT_AH	0x10
-#define IPV6_FW_IP6OPT_NONXT	0x20
-#define IPV6_FW_IP6OPT_OPTS	0x40
-
-/*
- * Definitions for TCP flags.
- */
-#define IPV6_FW_TCPF_FIN	TH_FIN
-#define IPV6_FW_TCPF_SYN	TH_SYN
-#define IPV6_FW_TCPF_RST	TH_RST
-#define IPV6_FW_TCPF_PSH	TH_PUSH
-#define IPV6_FW_TCPF_ACK	TH_ACK
-#define IPV6_FW_TCPF_URG	TH_URG
-
-/*
- * Main firewall chains definitions and global var's definitions.
- */
-#ifdef _KERNEL
-
-/*
- * Function definitions.
- */
-void ip6_fw_init(void);
-
-/* Firewall hooks */
-struct ip6_hdr;
-typedef	int ip6_fw_chk_t __P((struct ip6_hdr**, struct ifnet*,
-				u_short *, struct mbuf**));
-typedef	int ip6_fw_ctl_t __P((int, struct mbuf**));
-extern	ip6_fw_chk_t *ip6_fw_chk_ptr;
-extern	ip6_fw_ctl_t *ip6_fw_ctl_ptr;
-extern	int ip6_fw_enable;
-
-#endif /* _KERNEL */
-
-#endif /* _IP6_FW_H */
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6_mroute.h b/newlib/libc/sys/linux/include/netinet6/ip6_mroute.h
deleted file mode 100644
index 0cd915c68..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6_mroute.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6_mroute.h,v 1.5 2002/04/19 04:46:23 suz Exp $	*/
-/*	$KAME: ip6_mroute.h,v 1.19 2001/06/14 06:12:55 suz Exp $	*/
-
-/*
- * Copyright (C) 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*	BSDI ip_mroute.h,v 2.5 1996/10/11 16:01:48 pjd Exp	*/
-
-/*
- * Definitions for IP multicast forwarding.
- *
- * Written by David Waitzman, BBN Labs, August 1988.
- * Modified by Steve Deering, Stanford, February 1989.
- * Modified by Ajit Thyagarajan, PARC, August 1993.
- * Modified by Ajit Thyagarajan, PARC, August 1994.
- * Modified by Ahmed Helmy, USC, September 1996.
- *
- * MROUTING Revision: 1.2
- */
-
-#ifndef _NETINET6_IP6_MROUTE_H_
-#define _NETINET6_IP6_MROUTE_H_
-
-/*
- * Multicast Routing set/getsockopt commands.
- */
-#ifdef _KERNEL
-#define MRT6_OINIT		100	/* initialize forwarder (omrt6msg) */
-#endif
-#define MRT6_DONE		101	/* shut down forwarder */
-#define MRT6_ADD_MIF		102	/* add multicast interface */
-#define MRT6_DEL_MIF		103	/* delete multicast interface */
-#define MRT6_ADD_MFC		104	/* insert forwarding cache entry */
-#define MRT6_DEL_MFC		105	/* delete forwarding cache entry */
-#define MRT6_PIM                107     /* enable pim code */
-#define MRT6_INIT		108	/* initialize forwarder (mrt6msg) */
-
-#if BSD >= 199103
-#define GET_TIME(t)	microtime(&t)
-#elif defined(sun)
-#define GET_TIME(t)	uniqtime(&t)
-#else
-#define GET_TIME(t)	((t) = time)
-#endif
-
-/*
- * Types and macros for handling bitmaps with one bit per multicast interface.
- */
-typedef u_short mifi_t;		/* type of a mif index */
-#define MAXMIFS		64
-
-#ifndef	IF_SETSIZE
-#define	IF_SETSIZE	256
-#endif
-
-typedef	u_int32_t	if_mask;
-#define	NIFBITS	(sizeof(if_mask) * NBBY)	/* bits per mask */
-
-#ifndef howmany
-#define	howmany(x, y)	(((x) + ((y) - 1)) / (y))
-#endif
-
-typedef	struct if_set {
-	if_mask	ifs_bits[howmany(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define	IF_SET(n, p)	((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define	IF_CLR(n, p)	((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define	IF_ISSET(n, p)	((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define	IF_COPY(f, t)	bcopy(f, t, sizeof(*(f)))
-#define	IF_ZERO(p)	bzero(p, sizeof(*(p)))
-
-/*
- * Argument structure for MRT6_ADD_IF.
- */
-struct mif6ctl {
-	mifi_t	    mif6c_mifi;	    	/* the index of the mif to be added  */
-	u_char	    mif6c_flags;     	/* MIFF_ flags defined below         */
-	u_short	    mif6c_pifi;		/* the index of the physical IF */
-#ifdef notyet
-	u_int	    mif6c_rate_limit;    /* max rate           		     */
-#endif
-};
-
-#define	MIFF_REGISTER	0x1	/* mif represents a register end-point */
-
-/*
- * Argument structure for MRT6_ADD_MFC and MRT6_DEL_MFC
- */
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;	/* IPv6 origin of mcasts */
-	struct sockaddr_in6 mf6cc_mcastgrp; /* multicast group associated */
-	mifi_t		mf6cc_parent;	/* incoming ifindex */
-	struct if_set	mf6cc_ifset;	/* set of forwarding ifs */
-};
-
-/*
- * The kernel's multicast routing statistics.
- */
-struct mrt6stat {
-	u_quad_t mrt6s_mfc_lookups;	/* # forw. cache hash table hits   */
-	u_quad_t mrt6s_mfc_misses;	/* # forw. cache hash table misses */
-	u_quad_t mrt6s_upcalls;		/* # calls to mrouted              */
-	u_quad_t mrt6s_no_route;	/* no route for packet's origin    */
-	u_quad_t mrt6s_bad_tunnel;	/* malformed tunnel options        */
-	u_quad_t mrt6s_cant_tunnel;	/* no room for tunnel options      */
-	u_quad_t mrt6s_wrong_if;	/* arrived on wrong interface	   */
-	u_quad_t mrt6s_upq_ovflw;	/* upcall Q overflow		   */
-	u_quad_t mrt6s_cache_cleanups;	/* # entries with no upcalls 	   */
-	u_quad_t mrt6s_drop_sel;     	/* pkts dropped selectively        */
-	u_quad_t mrt6s_q_overflow;    	/* pkts dropped - Q overflow       */
-	u_quad_t mrt6s_pkt2large;     	/* pkts dropped - size > BKT SIZE  */
-	u_quad_t mrt6s_upq_sockfull;	/* upcalls dropped - socket full   */
-};
-
-#ifdef MRT6_OINIT
-/*
- * Struct used to communicate from kernel to multicast router
- * note the convenient similarity to an IPv6 header.
- * XXX old version, superseded by mrt6msg.
- */
-struct omrt6msg {
-	u_long	    unused1;
-	u_char	    im6_msgtype;		/* what type of message	    */
-#if 0
-#define MRT6MSG_NOCACHE	1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for user level encap*/
-#endif
-	u_char	    im6_mbz;			/* must be zero		    */
-	u_char	    im6_mif;			/* mif rec'd on		    */
-	u_char	    unused2;
-	struct in6_addr  im6_src, im6_dst;
-};
-#endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 header
- * like igmpmsg{} used for IPv4 implementation). This is because this
- * structure will be passed via an IPv6 raw socket, on which an application
- * will only receive the payload i.e. the data after the IPv6 header and all
- * the extension headers. (see Section 3 of draft-ietf-ipngwg-2292bis-01)
- */
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for user level encap*/
-	u_char	    im6_mbz;			/* must be zero		    */
-	u_char	    im6_msgtype;		/* what type of message	    */
-	u_int16_t   im6_mif;			/* mif rec'd on		    */
-	u_int32_t   im6_pad;			/* padding for 64bit arch   */
-	struct in6_addr  im6_src, im6_dst;
-};
-
-/*
- * Argument structure used by multicast routing daemon to get src-grp
- * packet counts
- */
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	u_quad_t pktcnt;
-	u_quad_t bytecnt;
-	u_quad_t wrong_if;
-};
-
-/*
- * Argument structure used by mrouted to get mif pkt counts
- */
-struct sioc_mif_req6 {
-	mifi_t mifi;		/* mif number				*/
-	u_quad_t icount;	/* Input packet count on mif		*/
-	u_quad_t ocount;	/* Output packet count on mif		*/
-	u_quad_t ibytes;	/* Input byte count on mif		*/
-	u_quad_t obytes;	/* Output byte count on mif		*/
-};
-
-#if defined(_KERNEL) || defined(KERNEL)
-/*
- * The kernel's multicast-interface structure.
- */
-struct mif6 {
-        u_char   	m6_flags;     	/* MIFF_ flags defined above         */
-	u_int      	m6_rate_limit; 	/* max rate			     */
-#ifdef notyet
-	struct tbf      *m6_tbf;      	/* token bucket structure at intf.   */
-#endif
-	struct in6_addr	m6_lcl_addr;   	/* local interface address           */
-	struct ifnet    *m6_ifp;     	/* pointer to interface              */
-	u_quad_t	m6_pkt_in;	/* # pkts in on interface            */
-	u_quad_t	m6_pkt_out;	/* # pkts out on interface           */
-	u_quad_t	m6_bytes_in;	/* # bytes in on interface	     */
-	u_quad_t	m6_bytes_out;	/* # bytes out on interface	     */
-	struct route_in6 m6_route;/* cached route if this is a tunnel */
-#ifdef notyet
-	u_int		m6_rsvp_on;	/* RSVP listening on this vif */
-	struct socket   *m6_rsvpd;	/* RSVP daemon socket */
-#endif
-};
-
-/*
- * The kernel's multicast forwarding cache entry structure
- */
-struct mf6c {
-	struct sockaddr_in6  mf6c_origin;	/* IPv6 origin of mcasts     */
-	struct sockaddr_in6  mf6c_mcastgrp;	/* multicast group associated*/
-	mifi_t	    	 mf6c_parent; 		/* incoming IF               */
-	struct if_set	 mf6c_ifset;		/* set of outgoing IFs */
-
-	u_quad_t    	mf6c_pkt_cnt;		/* pkt count for src-grp     */
-	u_quad_t    	mf6c_byte_cnt;		/* byte count for src-grp    */
-	u_quad_t    	mf6c_wrong_if;		/* wrong if for src-grp	     */
-	int	    	mf6c_expire;		/* time to clean entry up    */
-	struct timeval  mf6c_last_assert;	/* last time I sent an assert*/
-	struct rtdetq  *mf6c_stall;		/* pkts waiting for route */
-	struct mf6c    *mf6c_next;		/* hash table linkage */
-};
-
-#define MF6C_INCOMPLETE_PARENT ((mifi_t)-1)
-
-/*
- * Argument structure used for pkt info. while upcall is made
- */
-#ifndef _NETINET_IP_MROUTE_H_
-struct rtdetq {		/* XXX: rtdetq is also defined in ip_mroute.h */
-    struct mbuf 	*m;		/* A copy of the packet	    	    */
-    struct ifnet	*ifp;		/* Interface pkt came in on 	    */
-#ifdef UPCALL_TIMING
-    struct timeval	t;		/* Timestamp */
-#endif /* UPCALL_TIMING */
-    struct rtdetq	*next;
-};
-#endif /* _NETINET_IP_MROUTE_H_ */
-
-#define MF6CTBLSIZ	256
-#if (MF6CTBLSIZ & (MF6CTBLSIZ - 1)) == 0	  /* from sys:route.h */
-#define MF6CHASHMOD(h)	((h) & (MF6CTBLSIZ - 1))
-#else
-#define MF6CHASHMOD(h)	((h) % MF6CTBLSIZ)
-#endif
-
-#define MAX_UPQ6	4		/* max. no of pkts in upcall Q */
-
-int	ip6_mrouter_set __P((struct socket *so, struct sockopt *sopt));
-int	ip6_mrouter_get __P((struct socket *so, struct sockopt *sopt));
-int	ip6_mrouter_done __P((void));
-int	mrt6_ioctl __P((int, caddr_t));
-#endif /* _KERNEL */
-
-#endif /* !_NETINET6_IP6_MROUTE_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6_var.h b/newlib/libc/sys/linux/include/netinet6/ip6_var.h
deleted file mode 100644
index d93ade77d..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6_var.h
+++ /dev/null
@@ -1,354 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6_var.h,v 1.8 2001/09/12 08:37:55 julian Exp $	*/
-/*	$KAME: ip6_var.h,v 1.62 2001/05/03 14:51:48 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ip_var.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET6_IP6_VAR_H_
-#define _NETINET6_IP6_VAR_H_
-
-/*
- * IP6 reassembly queue structure.  Each fragment
- * being reassembled is attached to one of these structures.
- */
-struct	ip6q {
-	u_int32_t	ip6q_head;
-	u_int16_t	ip6q_len;
-	u_int8_t	ip6q_nxt;	/* ip6f_nxt in first fragment */
-	u_int8_t	ip6q_hlim;
-	struct ip6asfrag *ip6q_down;
-	struct ip6asfrag *ip6q_up;
-	u_int32_t	ip6q_ident;
-	u_int8_t	ip6q_arrive;
-	u_int8_t	ip6q_ttl;
-	struct in6_addr	ip6q_src, ip6q_dst;
-	struct ip6q	*ip6q_next;
-	struct ip6q	*ip6q_prev;
-	int		ip6q_unfrglen;	/* len of unfragmentable part */
-#ifdef notyet
-	u_char		*ip6q_nxtp;
-#endif
-};
-
-struct	ip6asfrag {
-	u_int32_t	ip6af_head;
-	u_int16_t	ip6af_len;
-	u_int8_t	ip6af_nxt;
-	u_int8_t	ip6af_hlim;
-	/* must not override the above members during reassembling */
-	struct ip6asfrag *ip6af_down;
-	struct ip6asfrag *ip6af_up;
-	struct mbuf	*ip6af_m;
-	int		ip6af_offset;	/* offset in ip6af_m to next header */
-	int		ip6af_frglen;	/* fragmentable part length */
-	int		ip6af_off;	/* fragment offset */
-	u_int16_t	ip6af_mff;	/* more fragment bit in frag off */
-};
-
-#define IP6_REASS_MBUF(ip6af) (*(struct mbuf **)&((ip6af)->ip6af_m))
-
-struct	ip6_moptions {
-	struct	ifnet *im6o_multicast_ifp; /* ifp for outgoing multicasts */
-	u_char	im6o_multicast_hlim;	/* hoplimit for outgoing multicasts */
-	u_char	im6o_multicast_loop;	/* 1 >= hear sends if a member */
-	LIST_HEAD(, in6_multi_mship) im6o_memberships;
-};
-
-/*
- * Control options for outgoing packets
- */
-
-/* Routing header related info */
-struct	ip6po_rhinfo {
-	struct	ip6_rthdr *ip6po_rhi_rthdr; /* Routing header */
-	struct	route_in6 ip6po_rhi_route; /* Route to the 1st hop */
-};
-#define ip6po_rthdr	ip6po_rhinfo.ip6po_rhi_rthdr
-#define ip6po_route	ip6po_rhinfo.ip6po_rhi_route
-
-struct	ip6_pktopts {
-	struct	mbuf *ip6po_m;	/* Pointer to mbuf storing the data */
-	int	ip6po_hlim;	/* Hoplimit for outgoing packets */
-
-	/* Outgoing IF/address information */
-	struct	in6_pktinfo *ip6po_pktinfo;
-
-	struct	sockaddr *ip6po_nexthop; /* Next-hop address */
-	
-	struct	ip6_hbh *ip6po_hbh; /* Hop-by-Hop options header */
-
-	/* Destination options header (before a routing header) */
-	struct	ip6_dest *ip6po_dest1;
-
-	/* Routing header related info. */
-	struct	ip6po_rhinfo ip6po_rhinfo;
-
-	/* Destination options header (after a routing header) */
-	struct	ip6_dest *ip6po_dest2;
-};
-
-/*
- * Control options for incoming packets
- */
-
-struct	ip6stat {
-	u_quad_t ip6s_total;		/* total packets received */
-	u_quad_t ip6s_tooshort;		/* packet too short */
-	u_quad_t ip6s_toosmall;		/* not enough data */
-	u_quad_t ip6s_fragments;	/* fragments received */
-	u_quad_t ip6s_fragdropped;	/* frags dropped(dups, out of space) */
-	u_quad_t ip6s_fragtimeout;	/* fragments timed out */
-	u_quad_t ip6s_fragoverflow;	/* fragments that exceeded limit */
-	u_quad_t ip6s_forward;		/* packets forwarded */
-	u_quad_t ip6s_cantforward;	/* packets rcvd for unreachable dest */
-	u_quad_t ip6s_redirectsent;	/* packets forwarded on same net */
-	u_quad_t ip6s_delivered;	/* datagrams delivered to upper level*/
-	u_quad_t ip6s_localout;		/* total ip packets generated here */
-	u_quad_t ip6s_odropped;		/* lost packets due to nobufs, etc. */
-	u_quad_t ip6s_reassembled;	/* total packets reassembled ok */
-	u_quad_t ip6s_fragmented;	/* datagrams sucessfully fragmented */
-	u_quad_t ip6s_ofragments;	/* output fragments created */
-	u_quad_t ip6s_cantfrag;		/* don't fragment flag was set, etc. */
-	u_quad_t ip6s_badoptions;	/* error in option processing */
-	u_quad_t ip6s_noroute;		/* packets discarded due to no route */
-	u_quad_t ip6s_badvers;		/* ip6 version != 6 */
-	u_quad_t ip6s_rawout;		/* total raw ip packets generated */
-	u_quad_t ip6s_badscope;		/* scope error */
-	u_quad_t ip6s_notmember;	/* don't join this multicast group */
-	u_quad_t ip6s_nxthist[256];	/* next header history */
-	u_quad_t ip6s_m1;		/* one mbuf */
-	u_quad_t ip6s_m2m[32];		/* two or more mbuf */
-	u_quad_t ip6s_mext1;		/* one ext mbuf */
-	u_quad_t ip6s_mext2m;		/* two or more ext mbuf */
-	u_quad_t ip6s_exthdrtoolong;	/* ext hdr are not continuous */
-	u_quad_t ip6s_nogif;		/* no match gif found */
-	u_quad_t ip6s_toomanyhdr;	/* discarded due to too many headers */
-
-	/*
-	 * statistics for improvement of the source address selection
-	 * algorithm:
-	 * XXX: hardcoded 16 = # of ip6 multicast scope types + 1
-	 */
-	/* number of times that address selection fails */
-	u_quad_t ip6s_sources_none;
-	/* number of times that an address on the outgoing I/F is chosen */
-	u_quad_t ip6s_sources_sameif[16];
-	/* number of times that an address on a non-outgoing I/F is chosen */
-	u_quad_t ip6s_sources_otherif[16];
-	/*
-	 * number of times that an address that has the same scope
-	 * from the destination is chosen.
-	 */
-	u_quad_t ip6s_sources_samescope[16];
-	/*
-	 * number of times that an address that has a different scope
-	 * from the destination is chosen.
-	 */
-	u_quad_t ip6s_sources_otherscope[16];
-	/* number of times that an deprecated address is chosen */
-	u_quad_t ip6s_sources_deprecated[16];
-
-	u_quad_t ip6s_forward_cachehit;
-	u_quad_t ip6s_forward_cachemiss;
-};
-
-#ifdef _KERNEL
-/*
- * IPv6 onion peeling state.
- * it will be initialized when we come into ip6_input().
- * XXX do not make it a kitchen sink!
- */
-struct ip6aux {
-	u_int32_t ip6a_flags;
-#define IP6A_SWAP	0x01		/* swapped home/care-of on packet */
-#define IP6A_HASEEN	0x02		/* HA was present */
-#define IP6A_BRUID	0x04		/* BR Unique Identifier was present */
-#define IP6A_RTALERTSEEN 0x08		/* rtalert present */
-
-	/* ip6.ip6_src */
-	struct in6_addr ip6a_careof;	/* care-of address of the peer */
-	struct in6_addr ip6a_home;	/* home address of the peer */
-	u_int16_t	ip6a_bruid;	/* BR unique identifier */
-
-	/* ip6.ip6_dst */
-	struct in6_ifaddr *ip6a_dstia6;	/* my ifaddr that matches ip6_dst */
-
-	/* rtalert */
-	u_int16_t ip6a_rtalert;		/* rtalert option value */
-
-	/*
-	 * decapsulation history will be here.
-	 * with IPsec it may not be accurate.
-	 */
-};
-#endif
-
-#ifdef _KERNEL
-/* flags passed to ip6_output as last parameter */
-#define	IPV6_DADOUTPUT		0x01	/* DAD */
-#define	IPV6_FORWARDING		0x02	/* most of IPv6 header exists */
-#define	IPV6_MINMTU		0x04	/* use minimum MTU (IPV6_USE_MIN_MTU) */
-
-extern struct	ip6stat ip6stat;	/* statistics */
-extern u_int32_t ip6_id;		/* fragment identifier */
-extern int	ip6_defhlim;		/* default hop limit */
-extern int	ip6_defmcasthlim;	/* default multicast hop limit */
-extern int	ip6_forwarding;		/* act as router? */
-extern int	ip6_forward_srcrt;	/* forward src-routed? */
-extern int	ip6_gif_hlim;		/* Hop limit for gif encap packet */
-extern int	ip6_use_deprecated;	/* allow deprecated addr as source */
-extern int	ip6_rr_prune;		/* router renumbering prefix
-					 * walk list every 5 sec.    */
-#define ip6_mapped_addr_on	(!ip6_v6only)
-extern int	ip6_v6only;
-
-extern struct socket *ip6_mrouter; 	/* multicast routing daemon */
-extern int	ip6_sendredirects;	/* send IP redirects when forwarding? */
-extern int	ip6_maxfragpackets; /* Maximum packets in reassembly queue */
-extern int	ip6_sourcecheck;	/* Verify source interface */
-extern int	ip6_sourcecheck_interval; /* Interval between log messages */
-extern int	ip6_accept_rtadv;	/* Acts as a host not a router */
-extern int	ip6_keepfaith;		/* Firewall Aided Internet Translator */
-extern int	ip6_log_interval;
-extern time_t	ip6_log_time;
-extern int	ip6_hdrnestlimit; /* upper limit of # of extension headers */
-extern int	ip6_dad_count;		/* DupAddrDetectionTransmits */
-
-extern u_int32_t ip6_flow_seq;
-extern int ip6_auto_flowlabel;
-extern int ip6_auto_linklocal;
-
-extern int   ip6_anonportmin;		/* minimum ephemeral port */
-extern int   ip6_anonportmax;		/* maximum ephemeral port */
-extern int   ip6_lowportmin;		/* minimum reserved port */
-extern int   ip6_lowportmax;		/* maximum reserved port */
-
-extern int	ip6_use_tempaddr; /* whether to use temporary addresses. */
-
-extern struct	pr_usrreqs rip6_usrreqs;
-struct sockopt;
-
-struct inpcb;
-
-int	icmp6_ctloutput __P((struct socket *, struct sockopt *sopt));
-
-struct in6_ifaddr;
-void	ip6_init __P((void));
-void	ip6intr __P((void));
-void	ip6_input __P((struct mbuf *));
-struct in6_ifaddr *ip6_getdstifaddr __P((struct mbuf *));
-void	ip6_freepcbopts __P((struct ip6_pktopts *));
-void	ip6_freemoptions __P((struct ip6_moptions *));
-int	ip6_unknown_opt __P((u_int8_t *, struct mbuf *, int));
-char *	ip6_get_prevhdr __P((struct mbuf *, int));
-int	ip6_nexthdr __P((struct mbuf *, int, int, int *));
-int	ip6_lasthdr __P((struct mbuf *, int, int, int *));
-
-struct mbuf *ip6_addaux __P((struct mbuf *));
-struct mbuf *ip6_findaux __P((struct mbuf *));
-void	ip6_delaux __P((struct mbuf *));
-
-int	ip6_mforward __P((struct ip6_hdr *, struct ifnet *, struct mbuf *));
-int	ip6_process_hopopts __P((struct mbuf *, u_int8_t *, int, u_int32_t *,
-				 u_int32_t *));
-void	ip6_savecontrol __P((struct inpcb *, struct mbuf **, struct ip6_hdr *,
-			     struct mbuf *));
-void	ip6_notify_pmtu __P((struct inpcb *, struct sockaddr_in6 *,
-			     u_int32_t *));
-int	ip6_sysctl __P((int *, u_int, void *, size_t *, void *, size_t));
-
-void	ip6_forward __P((struct mbuf *, int));
-
-void	ip6_mloopback __P((struct ifnet *, struct mbuf *, struct sockaddr_in6 *));
-int	ip6_output __P((struct mbuf *, struct ip6_pktopts *,
-			struct route_in6 *,
-			int,
-			struct ip6_moptions *, struct ifnet **));
-int	ip6_ctloutput __P((struct socket *, struct sockopt *sopt));
-void	init_ip6pktopts __P((struct ip6_pktopts *));
-int	ip6_setpktoptions __P((struct mbuf *, struct ip6_pktopts *, int, int));
-void	ip6_clearpktopts __P((struct ip6_pktopts *, int, int));
-struct ip6_pktopts *ip6_copypktopts __P((struct ip6_pktopts *, int));
-int	ip6_optlen __P((struct inpcb *));
-
-int	route6_input __P((struct mbuf **, int *, int));
-
-void	frag6_init __P((void));
-int	frag6_input __P((struct mbuf **, int *, int));
-void	frag6_slowtimo __P((void));
-void	frag6_drain __P((void));
-
-void	rip6_init __P((void));
-int	rip6_input __P((struct mbuf **mp, int *offp, int proto));
-void	rip6_ctlinput __P((int, struct sockaddr *, void *));
-int	rip6_ctloutput __P((struct socket *so, struct sockopt *sopt));
-int	rip6_output __P((struct mbuf *, ...));
-int	rip6_usrreq __P((struct socket *,
-	    int, struct mbuf *, struct mbuf *, struct mbuf *, struct thread *));
-
-int	dest6_input __P((struct mbuf **, int *, int));
-int	none_input __P((struct mbuf **, int *, int));
-#endif /* _KERNEL */
-
-#endif /* !_NETINET6_IP6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ip6protosw.h b/newlib/libc/sys/linux/include/netinet6/ip6protosw.h
deleted file mode 100644
index 98d3a1dd9..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ip6protosw.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ip6protosw.h,v 1.9 2002/04/19 04:46:23 suz Exp $	*/
-/*	$KAME: ip6protosw.h,v 1.25 2001/09/26 06:13:03 keiichi Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-
-/*	BSDI protosw.h,v 2.3 1996/10/11 16:02:40 pjd Exp	*/
-
-/*-
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)protosw.h	8.1 (Berkeley) 6/2/93
- */
-
-#ifndef _NETINET6_IP6PROTOSW_H_
-#define _NETINET6_IP6PROTOSW_H_
-
-/*
- * For pfil_head structure.
- */
-#include <net/pfil.h>
-
-/*
- * Protocol switch table for IPv6.
- * All other definitions should refer to sys/protosw.h
- */
-
-struct mbuf;
-struct sockaddr;
-struct socket;
-struct domain;
-struct thread;
-struct ip6_hdr;
-struct icmp6_hdr;
-struct in6_addr;
-struct pr_usrreqs;
-
-/*
- * argument type for the last arg of pr_ctlinput().
- * should be consulted only with AF_INET6 family.
- *
- * IPv6 ICMP IPv6 [exthdrs] finalhdr paylaod
- * ^    ^    ^              ^
- * |    |    ip6c_ip6       ip6c_off
- * |    ip6c_icmp6
- * ip6c_m
- *
- * ip6c_finaldst usually points to ip6c_ip6->ip6_dst.  if the original
- * (internal) packet carries a routing header, it may point the final
- * dstination address in the routing header.
- *
- * ip6c_src: ip6c_ip6->ip6_src + scope info + flowlabel in ip6c_ip6
- *	(beware of flowlabel, if you try to compare it against others)
- * ip6c_dst: ip6c_finaldst + scope info
- */
-struct ip6ctlparam {
-	struct mbuf *ip6c_m;		/* start of mbuf chain */
-	struct icmp6_hdr *ip6c_icmp6;	/* icmp6 header of target packet */
-	struct ip6_hdr *ip6c_ip6;	/* ip6 header of target packet */
-	int ip6c_off;			/* offset of the target proto header */
-	struct sockaddr_in6 *ip6c_src;	/* srcaddr w/ additional info */
-	struct sockaddr_in6 *ip6c_dst;	/* (final) dstaddr w/ additional info */
-	struct in6_addr *ip6c_finaldst;	/* final destination address */
-	void *ip6c_cmdarg;		/* control command dependent data */
-	u_int8_t ip6c_nxt;		/* final next header field */
-};
-
-struct ip6protosw {
-	short	pr_type;		/* socket type used for */
-	struct	domain *pr_domain;	/* domain protocol a member of */
-	short	pr_protocol;		/* protocol number */
-	short	pr_flags;		/* see below */
-
-/* protocol-protocol hooks */
-	int	(*pr_input)		/* input to protocol (from below) */
-			__P((struct mbuf **, int *, int));
-	int	(*pr_output)		/* output to protocol (from above) */
-			__P((struct mbuf *, ...));
-	void	(*pr_ctlinput)		/* control input (from below) */
-			__P((int, struct sockaddr *, void *));
-	int	(*pr_ctloutput)		/* control output (from above) */
-			__P((struct socket *, struct sockopt *));
-
-/* user-protocol hook */
-	int	(*pr_usrreq)		/* user request: see list below */
-			__P((struct socket *, int, struct mbuf *,
-			     struct mbuf *, struct mbuf *, struct thread *));
-
-/* utility hooks */
-	void	(*pr_init)		/* initialization hook */
-			__P((void));
-
-	void	(*pr_fasttimo)		/* fast timeout (200ms) */
-			__P((void));
-	void	(*pr_slowtimo)		/* slow timeout (500ms) */
-			__P((void));
-	void	(*pr_drain)		/* flush any excess space possible */
-			__P((void));
-	struct	pr_usrreqs *pr_usrreqs;	/* supersedes pr_usrreq() */
-	struct	pfil_head	pr_pfh;
-};
-
-#ifdef _KERNEL
-extern struct ip6protosw inet6sw[];
-#endif
-
-#endif /* !_NETINET6_IP6PROTOSW_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ipcomp.h b/newlib/libc/sys/linux/include/netinet6/ipcomp.h
deleted file mode 100644
index c9302e079..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ipcomp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ipcomp.h,v 1.4 2002/04/19 04:46:23 suz Exp $	*/
-/*	$KAME: ipcomp.h,v 1.11 2001/09/04 08:43:19 itojun Exp $	*/
-
-/*
- * Copyright (C) 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC2393 IP payload compression protocol (IPComp).
- */
-
-#ifndef _NETINET6_IPCOMP_H_
-#define _NETINET6_IPCOMP_H_
-
-#if defined(_KERNEL) && !defined(_LKM)
-#include "opt_inet.h"
-#endif
-
-struct ipcomp {
-	u_int8_t comp_nxt;	/* Next Header */
-	u_int8_t comp_flags;	/* reserved, must be zero */
-	u_int16_t comp_cpi;	/* Compression parameter index */
-};
-
-/* well-known algorithm number (in CPI), from RFC2409 */
-#define IPCOMP_OUI	1	/* vendor specific */
-#define IPCOMP_DEFLATE	2	/* RFC2394 */
-#define IPCOMP_LZS	3	/* RFC2395 */
-#define IPCOMP_MAX	4
-
-#define IPCOMP_CPI_NEGOTIATE_MIN	256
-
-#ifdef _KERNEL
-struct ipcomp_algorithm {
-	int (*compress) __P((struct mbuf *, struct mbuf *, size_t *));
-	int (*decompress) __P((struct mbuf *, struct mbuf *, size_t *));
-	size_t minplen;		/* minimum required length for compression */
-};
-
-struct ipsecrequest;
-extern const struct ipcomp_algorithm *ipcomp_algorithm_lookup __P((int));
-extern void ipcomp4_input __P((struct mbuf *, int));
-extern int ipcomp4_output __P((struct mbuf *, struct ipsecrequest *));
-#endif /* KERNEL */
-
-#endif /* _NETINET6_IPCOMP_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ipcomp6.h b/newlib/libc/sys/linux/include/netinet6/ipcomp6.h
deleted file mode 100644
index e5ec1537d..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ipcomp6.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ipcomp6.h,v 1.2 2001/06/11 12:39:06 ume Exp $	*/
-/*	$KAME: ipcomp.h,v 1.8 2000/09/26 07:55:14 itojun Exp $	*/
-
-/*
- * Copyright (C) 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * RFC2393 IP payload compression protocol (IPComp).
- */
-
-#ifndef _NETINET6_IPCOMP6_H_
-#define _NETINET6_IPCOMP6_H_
-
-#ifdef _KERNEL
-extern int ipcomp6_input __P((struct mbuf **, int *, int));
-extern int ipcomp6_output __P((struct mbuf *, u_char *, struct mbuf *,
-	struct ipsecrequest *));
-#endif /*KERNEL*/
-
-#endif /*_NETINET6_IPCOMP6_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet6/ipsec.h b/newlib/libc/sys/linux/include/netinet6/ipsec.h
deleted file mode 100644
index 5c6cbcfc6..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ipsec.h
+++ /dev/null
@@ -1,354 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ipsec.h,v 1.9 2002/04/19 04:46:23 suz Exp $	*/
-/*	$KAME: ipsec.h,v 1.53 2001/11/20 08:32:38 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * IPsec controller part.
- */
-
-#ifndef _NETINET6_IPSEC_H_
-#define _NETINET6_IPSEC_H_
-
-#if defined(_KERNEL) && !defined(_LKM) && !defined(KLD_MODULE)
-#include "opt_inet.h"
-#include "opt_ipsec.h"
-#endif
-
-#include <net/pfkeyv2.h>
-#include <netkey/keydb.h>
-
-#ifdef _KERNEL
-
-/*
- * Security Policy Index
- * Ensure that both address families in the "src" and "dst" are same.
- * When the value of the ul_proto is ICMPv6, the port field in "src"
- * specifies ICMPv6 type, and the port field in "dst" specifies ICMPv6 code.
- */
-struct secpolicyindex {
-	u_int8_t dir;			/* direction of packet flow, see blow */
-	struct sockaddr_storage src;	/* IP src address for SP */
-	struct sockaddr_storage dst;	/* IP dst address for SP */
-	u_int8_t prefs;			/* prefix length in bits for src */
-	u_int8_t prefd;			/* prefix length in bits for dst */
-	u_int16_t ul_proto;		/* upper layer Protocol */
-#ifdef notyet
-	uid_t uids;
-	uid_t uidd;
-	gid_t gids;
-	gid_t gidd;
-#endif
-};
-
-/* Security Policy Data Base */
-struct secpolicy {
-	LIST_ENTRY(secpolicy) chain;
-
-	int refcnt;			/* reference count */
-	struct secpolicyindex spidx;	/* selector */
-	u_int32_t id;			/* It's unique number on the system. */
-	u_int state;			/* 0: dead, others: alive */
-#define IPSEC_SPSTATE_DEAD	0
-#define IPSEC_SPSTATE_ALIVE	1
-
-	u_int policy;		/* DISCARD, NONE or IPSEC, see keyv2.h */
-	struct ipsecrequest *req;
-				/* pointer to the ipsec request tree, */
-				/* if policy == IPSEC else this value == NULL.*/
-
-	/*
-	 * lifetime handler.
-	 * the policy can be used without limitiation if both lifetime and
-	 * validtime are zero.
-	 * "lifetime" is passed by sadb_lifetime.sadb_lifetime_addtime.
-	 * "validtime" is passed by sadb_lifetime.sadb_lifetime_usetime.
-	 */
-	long created;		/* time created the policy */
-	long lastused;		/* updated every when kernel sends a packet */
-	long lifetime;		/* duration of the lifetime of this policy */
-	long validtime;		/* duration this policy is valid without use */
-};
-
-/* Request for IPsec */
-struct ipsecrequest {
-	struct ipsecrequest *next;
-				/* pointer to next structure */
-				/* If NULL, it means the end of chain. */
-	struct secasindex saidx;/* hint for search proper SA */
-				/* if __ss_len == 0 then no address specified.*/
-	u_int level;		/* IPsec level defined below. */
-
-	struct secasvar *sav;	/* place holder of SA for use */
-	struct secpolicy *sp;	/* back pointer to SP */
-};
-
-/* security policy in PCB */
-struct inpcbpolicy {
-	struct secpolicy *sp_in;
-	struct secpolicy *sp_out;
-	int priv;			/* privileged socket ? */
-};
-
-/* SP acquiring list table. */
-struct secspacq {
-	LIST_ENTRY(secspacq) chain;
-
-	struct secpolicyindex spidx;
-
-	long created;		/* for lifetime */
-	int count;		/* for lifetime */
-	/* XXX: here is mbuf place holder to be sent ? */
-};
-#endif /* _KERNEL */
-
-/* according to IANA assignment, port 0x0000 and proto 0xff are reserved. */
-#define IPSEC_PORT_ANY		0
-#define IPSEC_ULPROTO_ANY	255
-#define IPSEC_PROTO_ANY		255
-
-/* mode of security protocol */
-/* NOTE: DON'T use IPSEC_MODE_ANY at SPD.  It's only use in SAD */
-#define	IPSEC_MODE_ANY		0	/* i.e. wildcard. */
-#define	IPSEC_MODE_TRANSPORT	1
-#define	IPSEC_MODE_TUNNEL	2
-
-/*
- * Direction of security policy.
- * NOTE: Since INVALID is used just as flag.
- * The other are used for loop counter too.
- */
-#define IPSEC_DIR_ANY		0
-#define IPSEC_DIR_INBOUND	1
-#define IPSEC_DIR_OUTBOUND	2
-#define IPSEC_DIR_MAX		3
-#define IPSEC_DIR_INVALID	4
-
-/* Policy level */
-/*
- * IPSEC, ENTRUST and BYPASS are allowed for setsockopt() in PCB,
- * DISCARD, IPSEC and NONE are allowed for setkey() in SPD.
- * DISCARD and NONE are allowed for system default.
- */
-#define IPSEC_POLICY_DISCARD	0	/* discarding packet */
-#define IPSEC_POLICY_NONE	1	/* through IPsec engine */
-#define IPSEC_POLICY_IPSEC	2	/* do IPsec */
-#define IPSEC_POLICY_ENTRUST	3	/* consulting SPD if present. */
-#define IPSEC_POLICY_BYPASS	4	/* only for privileged socket. */
-
-/* Security protocol level */
-#define	IPSEC_LEVEL_DEFAULT	0	/* reference to system default */
-#define	IPSEC_LEVEL_USE		1	/* use SA if present. */
-#define	IPSEC_LEVEL_REQUIRE	2	/* require SA. */
-#define	IPSEC_LEVEL_UNIQUE	3	/* unique SA. */
-
-#define IPSEC_MANUAL_REQID_MAX	0x3fff
-				/*
-				 * if security policy level == unique, this id
-				 * indicate to a relative SA for use, else is
-				 * zero.
-				 * 1 - 0x3fff are reserved for manual keying.
-				 * 0 are reserved for above reason.  Others is
-				 * for kernel use.
-				 * Note that this id doesn't identify SA
-				 * by only itself.
-				 */
-#define IPSEC_REPLAYWSIZE  32
-
-/* statistics for ipsec processing */
-struct ipsecstat {
-	u_quad_t in_success;  /* succeeded inbound process */
-	u_quad_t in_polvio;
-			/* security policy violation for inbound process */
-	u_quad_t in_nosa;     /* inbound SA is unavailable */
-	u_quad_t in_inval;    /* inbound processing failed due to EINVAL */
-	u_quad_t in_nomem;    /* inbound processing failed due to ENOBUFS */
-	u_quad_t in_badspi;   /* failed getting a SPI */
-	u_quad_t in_ahreplay; /* AH replay check failed */
-	u_quad_t in_espreplay; /* ESP replay check failed */
-	u_quad_t in_ahauthsucc; /* AH authentication success */
-	u_quad_t in_ahauthfail; /* AH authentication failure */
-	u_quad_t in_espauthsucc; /* ESP authentication success */
-	u_quad_t in_espauthfail; /* ESP authentication failure */
-	u_quad_t in_esphist[256];
-	u_quad_t in_ahhist[256];
-	u_quad_t in_comphist[256];
-	u_quad_t out_success; /* succeeded outbound process */
-	u_quad_t out_polvio;
-			/* security policy violation for outbound process */
-	u_quad_t out_nosa;    /* outbound SA is unavailable */
-	u_quad_t out_inval;   /* outbound process failed due to EINVAL */
-	u_quad_t out_nomem;    /* inbound processing failed due to ENOBUFS */
-	u_quad_t out_noroute; /* there is no route */
-	u_quad_t out_esphist[256];
-	u_quad_t out_ahhist[256];
-	u_quad_t out_comphist[256];
-};
-
-/*
- * Definitions for IPsec & Key sysctl operations.
- */
-/*
- * Names for IPsec & Key sysctl objects
- */
-#define IPSECCTL_STATS			1	/* stats */
-#define IPSECCTL_DEF_POLICY		2
-#define IPSECCTL_DEF_ESP_TRANSLEV	3	/* int; ESP transport mode */
-#define IPSECCTL_DEF_ESP_NETLEV		4	/* int; ESP tunnel mode */
-#define IPSECCTL_DEF_AH_TRANSLEV	5	/* int; AH transport mode */
-#define IPSECCTL_DEF_AH_NETLEV		6	/* int; AH tunnel mode */
-#if 0	/* obsolete, do not reuse */
-#define IPSECCTL_INBOUND_CALL_IKE	7
-#endif
-#define	IPSECCTL_AH_CLEARTOS		8
-#define	IPSECCTL_AH_OFFSETMASK		9
-#define	IPSECCTL_DFBIT			10
-#define	IPSECCTL_ECN			11
-#define	IPSECCTL_DEBUG			12
-#define	IPSECCTL_ESP_RANDPAD		13
-#define IPSECCTL_MAXID			14
-
-#define IPSECCTL_NAMES { \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "def_policy", CTLTYPE_INT }, \
-	{ "esp_trans_deflev", CTLTYPE_INT }, \
-	{ "esp_net_deflev", CTLTYPE_INT }, \
-	{ "ah_trans_deflev", CTLTYPE_INT }, \
-	{ "ah_net_deflev", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ "ah_cleartos", CTLTYPE_INT }, \
-	{ "ah_offsetmask", CTLTYPE_INT }, \
-	{ "dfbit", CTLTYPE_INT }, \
-	{ "ecn", CTLTYPE_INT }, \
-	{ "debug", CTLTYPE_INT }, \
-	{ "esp_randpad", CTLTYPE_INT }, \
-}
-
-#define IPSEC6CTL_NAMES { \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "def_policy", CTLTYPE_INT }, \
-	{ "esp_trans_deflev", CTLTYPE_INT }, \
-	{ "esp_net_deflev", CTLTYPE_INT }, \
-	{ "ah_trans_deflev", CTLTYPE_INT }, \
-	{ "ah_net_deflev", CTLTYPE_INT }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-	{ "ecn", CTLTYPE_INT }, \
-	{ "debug", CTLTYPE_INT }, \
-	{ "esp_randpad", CTLTYPE_INT }, \
-}
-
-#ifdef _KERNEL
-struct ipsec_output_state {
-	struct mbuf *m;
-	struct route *ro;
-	struct sockaddr *dst;
-};
-
-struct ipsec_history {
-	int ih_proto;
-	u_int32_t ih_spi;
-};
-
-extern int ipsec_debug;
-
-extern struct ipsecstat ipsecstat;
-extern struct secpolicy ip4_def_policy;
-extern int ip4_esp_trans_deflev;
-extern int ip4_esp_net_deflev;
-extern int ip4_ah_trans_deflev;
-extern int ip4_ah_net_deflev;
-extern int ip4_ah_cleartos;
-extern int ip4_ah_offsetmask;
-extern int ip4_ipsec_dfbit;
-extern int ip4_ipsec_ecn;
-extern int ip4_esp_randpad;
-
-#define ipseclog(x)	do { if (ipsec_debug) log x; } while (0)
-
-extern struct secpolicy *ipsec4_getpolicybysock
-	__P((struct mbuf *, u_int, struct socket *, int *));
-extern struct secpolicy *ipsec4_getpolicybyaddr
-	__P((struct mbuf *, u_int, int, int *));
-
-struct inpcb;
-extern int ipsec_init_policy __P((struct socket *so, struct inpcbpolicy **));
-extern int ipsec_copy_policy
-	__P((struct inpcbpolicy *, struct inpcbpolicy *));
-extern u_int ipsec_get_reqlevel __P((struct ipsecrequest *));
-
-extern int ipsec4_set_policy __P((struct inpcb *inp, int optname,
-	caddr_t request, size_t len, int priv));
-extern int ipsec4_get_policy __P((struct inpcb *inpcb, caddr_t request,
-	size_t len, struct mbuf **mp));
-extern int ipsec4_delete_pcbpolicy __P((struct inpcb *));
-extern int ipsec4_in_reject_so __P((struct mbuf *, struct socket *));
-extern int ipsec4_in_reject __P((struct mbuf *, struct inpcb *));
-
-struct secas;
-struct tcpcb;
-extern int ipsec_chkreplay __P((u_int32_t, struct secasvar *));
-extern int ipsec_updatereplay __P((u_int32_t, struct secasvar *));
-
-extern size_t ipsec4_hdrsiz __P((struct mbuf *, u_int, struct inpcb *));
-extern size_t ipsec_hdrsiz_tcp __P((struct tcpcb *));
-
-struct ip;
-extern const char *ipsec4_logpacketstr __P((struct ip *, u_int32_t));
-extern const char *ipsec_logsastr __P((struct secasvar *));
-
-extern void ipsec_dumpmbuf __P((struct mbuf *));
-
-extern int ipsec4_output __P((struct ipsec_output_state *, struct secpolicy *,
-	int));
-extern int ipsec4_tunnel_validate __P((struct mbuf *, int, u_int,
-	struct secasvar *));
-extern struct mbuf *ipsec_copypkt __P((struct mbuf *));
-extern void ipsec_delaux __P((struct mbuf *));
-extern int ipsec_setsocket __P((struct mbuf *, struct socket *));
-extern struct socket *ipsec_getsocket __P((struct mbuf *));
-extern int ipsec_addhist __P((struct mbuf *, int, u_int32_t)); 
-extern struct ipsec_history *ipsec_gethist __P((struct mbuf *, int *));
-extern void ipsec_clearhist __P((struct mbuf *));
-#endif /* _KERNEL */
-
-#ifndef _KERNEL
-extern caddr_t ipsec_set_policy __P((char *, int));
-extern int ipsec_get_policylen __P((caddr_t));
-extern char *ipsec_dump_policy __P((caddr_t, char *));
-
-extern const char *ipsec_strerror __P((void));
-#endif /* !_KERNEL */
-
-#endif /* _NETINET6_IPSEC_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/ipsec6.h b/newlib/libc/sys/linux/include/netinet6/ipsec6.h
deleted file mode 100644
index 04a18cf72..000000000
--- a/newlib/libc/sys/linux/include/netinet6/ipsec6.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/ipsec6.h,v 1.5 2001/06/11 12:39:06 ume Exp $	*/
-/*	$KAME: ipsec.h,v 1.44 2001/03/23 08:08:47 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * IPsec controller part.
- */
-
-#ifndef _NETINET6_IPSEC6_H_
-#define _NETINET6_IPSEC6_H_
-
-#include <net/pfkeyv2.h>
-#include <netkey/keydb.h>
-
-#ifdef _KERNEL
-extern struct ipsecstat ipsec6stat;
-extern struct secpolicy ip6_def_policy;
-extern int ip6_esp_trans_deflev;
-extern int ip6_esp_net_deflev;
-extern int ip6_ah_trans_deflev;
-extern int ip6_ah_net_deflev;
-extern int ip6_ipsec_ecn;
-extern int ip6_esp_randpad;
-
-extern struct secpolicy *ipsec6_getpolicybysock
-	__P((struct mbuf *, u_int, struct socket *, int *));
-extern struct secpolicy *ipsec6_getpolicybyaddr
-	__P((struct mbuf *, u_int, int, int *));
-
-struct inpcb;
-
-extern int ipsec6_in_reject_so __P((struct mbuf *, struct socket *));
-extern int ipsec6_delete_pcbpolicy __P((struct inpcb *));
-extern int ipsec6_set_policy __P((struct inpcb *inp, int optname,
-	caddr_t request, size_t len, int priv));
-extern int ipsec6_get_policy
-	__P((struct inpcb *inp, caddr_t request, size_t len, struct mbuf **mp));
-extern int ipsec6_in_reject __P((struct mbuf *, struct inpcb *));
-
-struct tcp6cb;
-
-extern size_t ipsec6_hdrsiz __P((struct mbuf *, u_int, struct inpcb *));
-
-struct ip6_hdr;
-extern const char *ipsec6_logpacketstr __P((struct ip6_hdr *, u_int32_t));
-
-extern int ipsec6_output_trans __P((struct ipsec_output_state *, u_char *,
-	struct mbuf *, struct secpolicy *, int, int *));
-extern int ipsec6_output_tunnel __P((struct ipsec_output_state *,
-	struct secpolicy *, int));
-extern int ipsec6_tunnel_validate __P((struct mbuf *, int, u_int,
-	struct secasvar *));
-#endif /*_KERNEL*/
-
-#endif /*_NETINET6_IPSEC6_H_*/
diff --git a/newlib/libc/sys/linux/include/netinet6/mld6_var.h b/newlib/libc/sys/linux/include/netinet6/mld6_var.h
deleted file mode 100644
index 85f0da24a..000000000
--- a/newlib/libc/sys/linux/include/netinet6/mld6_var.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/mld6_var.h,v 1.2 2000/07/04 16:35:10 itojun Exp $	*/
-/*	$KAME: mld6_var.h,v 1.4 2000/03/25 07:23:54 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_MLD6_VAR_H_
-#define _NETINET6_MLD6_VAR_H_
-
-#ifdef _KERNEL
-
-#define MLD6_RANDOM_DELAY(X) (random() % (X) + 1)
-
-/*
- * States for MLD stop-listening processing
- */
-#define MLD6_OTHERLISTENER			0
-#define MLD6_IREPORTEDLAST			1
-
-void	mld6_init __P((void));
-void	mld6_input __P((struct mbuf *, int));
-void	mld6_start_listening __P((struct in6_multi *));
-void	mld6_stop_listening __P((struct in6_multi *));
-void	mld6_fasttimeo __P((void));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_MLD6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/nd6.h b/newlib/libc/sys/linux/include/netinet6/nd6.h
deleted file mode 100644
index c6e644df8..000000000
--- a/newlib/libc/sys/linux/include/netinet6/nd6.h
+++ /dev/null
@@ -1,404 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/nd6.h,v 1.10 2002/04/19 04:46:23 suz Exp $	*/
-/*	$KAME: nd6.h,v 1.76 2001/12/18 02:10:31 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_ND6_H_
-#define _NETINET6_ND6_H_
-
-/* see net/route.h, or net/if_inarp.h */
-#ifndef RTF_ANNOUNCE
-#define RTF_ANNOUNCE	RTF_PROTO2
-#endif
-
-#include <sys/queue.h>
-#include <sys/callout.h>
-
-struct	llinfo_nd6 {
-	struct	llinfo_nd6 *ln_next;
-	struct	llinfo_nd6 *ln_prev;
-	struct	rtentry *ln_rt;
-	struct	mbuf *ln_hold;	/* last packet until resolved/timeout */
-	long	ln_asked;	/* number of queries already sent for this addr */
-	u_long	ln_expire;	/* lifetime for NDP state transition */
-	short	ln_state;	/* reachability state */
-	short	ln_router;	/* 2^0: ND6 router bit */
-	int	ln_byhint;	/* # of times we made it reachable by UL hint */
-};
-
-#define ND6_LLINFO_NOSTATE	-2
-/*
- * We don't need the WAITDELETE state any more, but we keep the definition
- * in a comment line instead of removing it. This is necessary to avoid
- * unintentionally reusing the value for another purpose, which might
- * affect backward compatibility with old applications.
- * (20000711 jinmei@kame.net)
- */
-/* #define ND6_LLINFO_WAITDELETE	-1 */
-#define ND6_LLINFO_INCOMPLETE	0
-#define ND6_LLINFO_REACHABLE	1
-#define ND6_LLINFO_STALE	2
-#define ND6_LLINFO_DELAY	3
-#define ND6_LLINFO_PROBE	4
-
-#define ND6_IS_LLINFO_PROBREACH(n) ((n)->ln_state > ND6_LLINFO_INCOMPLETE)
-
-struct nd_ifinfo {
-	u_int32_t linkmtu;		/* LinkMTU */
-	u_int32_t maxmtu;		/* Upper bound of LinkMTU */
-	u_int32_t basereachable;	/* BaseReachableTime */
-	u_int32_t reachable;		/* Reachable Time */
-	u_int32_t retrans;		/* Retrans Timer */
-	u_int32_t flags;		/* Flags */
-	int recalctm;			/* BaseReacable re-calculation timer */
-	u_int8_t chlim;			/* CurHopLimit */
-	u_int8_t receivedra;
-	/* the following 3 members are for privacy extension for addrconf */
-	u_int8_t randomseed0[8]; /* upper 64 bits of MD5 digest */
-	u_int8_t randomseed1[8]; /* lower 64 bits (usually the EUI64 IFID) */
-	u_int8_t randomid[8];	/* current random ID */
-};
-
-#define ND6_IFF_PERFORMNUD	0x1
-
-struct in6_nbrinfo {
-	char ifname[IFNAMSIZ];	/* if name, e.g. "en0" */
-	struct in6_addr addr;	/* IPv6 address of the neighbor */
-	long	asked;		/* number of queries already sent for this addr */
-	int	isrouter;	/* if it acts as a router */
-	int	state;		/* reachability state */
-	int	expire;		/* lifetime for NDP state transition */
-};
-
-#define DRLSTSIZ 10
-#define PRLSTSIZ 10
-struct	in6_drlist {
-	char ifname[IFNAMSIZ];
-	struct {
-		struct	in6_addr rtaddr;
-		u_char	flags;
-		u_short	rtlifetime;
-		u_long	expire;
-		u_short if_index;
-	} defrouter[DRLSTSIZ];
-};
-
-struct	in6_defrouter {
-	struct	sockaddr_in6 rtaddr;
-	u_char	flags;
-	u_short	rtlifetime;
-	u_long	expire;
-	u_short if_index;
-};
-
-struct	in6_prlist {
-	char ifname[IFNAMSIZ];
-	struct {
-		struct	in6_addr prefix;
-		struct prf_ra raflags;
-		u_char	prefixlen;
-		u_char	origin;
-		u_int32_t vltime;
-		u_int32_t pltime;
-		time_t expire;
-		u_short if_index;
-		u_short advrtrs; /* number of advertisement routers */
-		struct	in6_addr advrtr[DRLSTSIZ]; /* XXX: explicit limit */
-	} prefix[PRLSTSIZ];
-};
-
-struct in6_prefix {
-	struct	sockaddr_in6 prefix;
-	struct prf_ra raflags;
-	u_char	prefixlen;
-	u_char	origin;
-	u_long	vltime;
-	u_long	pltime;
-	u_long	expire;
-	u_int32_t flags;
-	int refcnt;
-	u_short if_index;
-	u_short advrtrs; /* number of advertisement routers */
-	/* struct sockaddr_in6 advrtr[] */
-};
-
-#ifdef _KERNEL
-struct	in6_ondireq {
-	char ifname[IFNAMSIZ];
-	struct {
-		u_int32_t linkmtu;	/* LinkMTU */
-		u_int32_t maxmtu;	/* Upper bound of LinkMTU */
-		u_int32_t basereachable; /* BaseReachableTime */
-		u_int32_t reachable;	/* Reachable Time */
-		u_int32_t retrans;	/* Retrans Timer */
-		u_int32_t flags;	/* Flags */
-		int recalctm;		/* BaseReacable re-calculation timer */
-		u_int8_t chlim;		/* CurHopLimit */
-		u_int8_t receivedra;
-	} ndi;
-};
-#endif
-
-struct	in6_ndireq {
-	char ifname[IFNAMSIZ];
-	struct nd_ifinfo ndi;
-};
-
-struct	in6_ndifreq {
-	char ifname[IFNAMSIZ];
-	u_long ifindex;
-};
-
-/* Prefix status */
-#define NDPRF_ONLINK		0x1
-#define NDPRF_DETACHED		0x2
-
-/* protocol constants */
-#define MAX_RTR_SOLICITATION_DELAY	1	/* 1sec */
-#define RTR_SOLICITATION_INTERVAL	4	/* 4sec */
-#define MAX_RTR_SOLICITATIONS		3
-
-#define ND6_INFINITE_LIFETIME		0xffffffff
-
-#ifdef _KERNEL
-/* node constants */
-#define MAX_REACHABLE_TIME		3600000	/* msec */
-#define REACHABLE_TIME			30000	/* msec */
-#define RETRANS_TIMER			1000	/* msec */
-#define MIN_RANDOM_FACTOR		512	/* 1024 * 0.5 */
-#define MAX_RANDOM_FACTOR		1536	/* 1024 * 1.5 */
-#define DEF_TEMP_VALID_LIFETIME		604800	/* 1 week */
-#define DEF_TEMP_PREFERRED_LIFETIME	86400	/* 1 day */
-#define TEMPADDR_REGEN_ADVANCE		5	/* sec */
-#define MAX_TEMP_DESYNC_FACTOR		600	/* 10 min */
-#define ND_COMPUTE_RTIME(x) \
-		(((MIN_RANDOM_FACTOR * (x >> 10)) + (random() & \
-		((MAX_RANDOM_FACTOR - MIN_RANDOM_FACTOR) * (x >> 10)))) /1000)
-
-TAILQ_HEAD(nd_drhead, nd_defrouter);
-struct	nd_defrouter {
-	TAILQ_ENTRY(nd_defrouter) dr_entry;
-	struct	in6_addr rtaddr;
-	u_char	flags;		/* flags on RA message */
-	u_short	rtlifetime;
-	u_long	expire;
-	u_long	advint;		/* Mobile IPv6 addition (milliseconds) */
-	u_long	advint_expire;	/* Mobile IPv6 addition */
-	int	advints_lost;	/* Mobile IPv6 addition */
-	struct  ifnet *ifp;
-};
-
-struct nd_prefix {
-	struct ifnet *ndpr_ifp;
-	LIST_ENTRY(nd_prefix) ndpr_entry;
-	struct sockaddr_in6 ndpr_prefix;	/* prefix */
-	struct in6_addr ndpr_mask; /* netmask derived from the prefix */
-	struct in6_addr ndpr_addr; /* address that is derived from the prefix */
-	u_int32_t ndpr_vltime;	/* advertised valid lifetime */
-	u_int32_t ndpr_pltime;	/* advertised preferred lifetime */
-	time_t ndpr_expire;	/* expiration time of the prefix */
-	time_t ndpr_preferred;	/* preferred time of the prefix */
-	struct prf_ra ndpr_flags;
-	u_int32_t ndpr_stateflags; /* actual state flags */
-	/* list of routers that advertise the prefix: */
-	LIST_HEAD(pr_rtrhead, nd_pfxrouter) ndpr_advrtrs;
-	u_char	ndpr_plen;
-	int	ndpr_refcnt;	/* reference couter from addresses */
-};
-
-#define ndpr_next		ndpr_entry.le_next
-
-#define ndpr_raf		ndpr_flags
-#define ndpr_raf_onlink		ndpr_flags.onlink
-#define ndpr_raf_auto		ndpr_flags.autonomous
-
-/*
- * We keep expired prefix for certain amount of time, for validation purposes.
- * 1800s = MaxRtrAdvInterval
- */
-#define NDPR_KEEP_EXPIRED	(1800 * 2)
-
-/*
- * Message format for use in obtaining information about prefixes
- * from inet6 sysctl function
- */
-struct inet6_ndpr_msghdr {
-	u_short	inpm_msglen;	/* to skip over non-understood messages */
-	u_char	inpm_version;	/* future binary compatibility */
-	u_char	inpm_type;	/* message type */
-	struct in6_addr inpm_prefix;
-	u_long	prm_vltim;
-	u_long	prm_pltime;
-	u_long	prm_expire;
-	u_long	prm_preferred;
-	struct in6_prflags prm_flags;
-	u_short	prm_index;	/* index for associated ifp */
-	u_char	prm_plen;	/* length of prefix in bits */
-};
-
-#define prm_raf_onlink		prm_flags.prf_ra.onlink
-#define prm_raf_auto		prm_flags.prf_ra.autonomous
-
-#define prm_statef_onlink	prm_flags.prf_state.onlink
-
-#define prm_rrf_decrvalid	prm_flags.prf_rr.decrvalid
-#define prm_rrf_decrprefd	prm_flags.prf_rr.decrprefd
-
-#define ifpr2ndpr(ifpr)	((struct nd_prefix *)(ifpr))
-#define ndpr2ifpr(ndpr)	((struct ifprefix *)(ndpr))
-
-struct nd_pfxrouter {
-	LIST_ENTRY(nd_pfxrouter) pfr_entry;
-#define pfr_next pfr_entry.le_next
-	struct nd_defrouter *router;
-};
-
-LIST_HEAD(nd_prhead, nd_prefix);
-
-/* nd6.c */
-extern int nd6_prune;
-extern int nd6_delay;
-extern int nd6_umaxtries;
-extern int nd6_mmaxtries;
-extern int nd6_useloopback;
-extern int nd6_maxnudhint;
-extern int nd6_gctimer;
-extern struct llinfo_nd6 llinfo_nd6;
-extern struct nd_ifinfo *nd_ifinfo;
-extern struct nd_drhead nd_defrouter;
-extern struct nd_prhead nd_prefix;
-extern int nd6_debug;
-
-#define nd6log(x)	do { if (nd6_debug) log x; } while (0)
-
-extern struct callout nd6_timer_ch;
-
-/* nd6_rtr.c */
-extern int nd6_defifindex;
-extern int ip6_desync_factor;	/* seconds */
-extern u_int32_t ip6_temp_preferred_lifetime; /* seconds */
-extern u_int32_t ip6_temp_valid_lifetime; /* seconds */
-extern int ip6_temp_regen_advance; /* seconds */
-
-union nd_opts {
-	struct nd_opt_hdr *nd_opt_array[9];	/* max = home agent info */
-	struct {
-		struct nd_opt_hdr *zero;
-		struct nd_opt_hdr *src_lladdr;
-		struct nd_opt_hdr *tgt_lladdr;
-		struct nd_opt_prefix_info *pi_beg; /* multiple opts, start */
-		struct nd_opt_rd_hdr *rh;
-		struct nd_opt_mtu *mtu;
-		struct nd_opt_hdr *six;
-		struct nd_opt_advint *adv;
-		struct nd_opt_hai *hai;
-		struct nd_opt_hdr *search;	/* multiple opts */
-		struct nd_opt_hdr *last;	/* multiple opts */
-		int done;
-		struct nd_opt_prefix_info *pi_end;/* multiple opts, end */
-	} nd_opt_each;
-};
-#define nd_opts_src_lladdr	nd_opt_each.src_lladdr
-#define nd_opts_tgt_lladdr	nd_opt_each.tgt_lladdr
-#define nd_opts_pi		nd_opt_each.pi_beg
-#define nd_opts_pi_end		nd_opt_each.pi_end
-#define nd_opts_rh		nd_opt_each.rh
-#define nd_opts_mtu		nd_opt_each.mtu
-#define nd_opts_adv		nd_opt_each.adv
-#define nd_opts_hai		nd_opt_each.hai
-#define nd_opts_search		nd_opt_each.search
-#define nd_opts_last		nd_opt_each.last
-#define nd_opts_done		nd_opt_each.done
-
-/* XXX: need nd6_var.h?? */
-/* nd6.c */
-void nd6_init __P((void));
-void nd6_ifattach __P((struct ifnet *));
-int nd6_is_addr_neighbor __P((struct sockaddr_in6 *, struct ifnet *));
-void nd6_option_init __P((void *, int, union nd_opts *));
-struct nd_opt_hdr *nd6_option __P((union nd_opts *));
-int nd6_options __P((union nd_opts *));
-struct	rtentry *nd6_lookup __P((struct in6_addr *, int, struct ifnet *));
-void nd6_setmtu __P((struct ifnet *));
-void nd6_timer __P((void *));
-void nd6_purge __P((struct ifnet *));
-struct llinfo_nd6 *nd6_free __P((struct rtentry *));
-void nd6_nud_hint __P((struct rtentry *, struct in6_addr *, int));
-int nd6_resolve __P((struct ifnet *, struct rtentry *,
-		     struct mbuf *, struct sockaddr *, u_char *));
-void nd6_rtrequest __P((int, struct rtentry *, struct rt_addrinfo *));
-int nd6_ioctl __P((u_long, caddr_t, struct ifnet *));
-struct rtentry *nd6_cache_lladdr __P((struct ifnet *, struct in6_addr *,
-	char *, int, int, int));
-int nd6_output __P((struct ifnet *, struct ifnet *, struct mbuf *,
-		    struct sockaddr_in6 *, struct rtentry *));
-int nd6_storelladdr __P((struct ifnet *, struct rtentry *, struct mbuf *,
-			 struct sockaddr *, u_char *));
-int nd6_need_cache __P((struct ifnet *));
-
-/* nd6_nbr.c */
-void nd6_na_input __P((struct mbuf *, int, int));
-void nd6_na_output __P((struct ifnet *, const struct in6_addr *,
-	const struct in6_addr *, u_long, int, struct sockaddr *));
-void nd6_ns_input __P((struct mbuf *, int, int));
-void nd6_ns_output __P((struct ifnet *, const struct in6_addr *,
-	const struct in6_addr *, struct llinfo_nd6 *, int));
-caddr_t nd6_ifptomac __P((struct ifnet *));
-void nd6_dad_start __P((struct ifaddr *, int *));
-void nd6_dad_stop __P((struct ifaddr *));
-void nd6_dad_duplicated __P((struct ifaddr *));
-
-/* nd6_rtr.c */
-void nd6_rs_input __P((struct mbuf *, int, int));
-void nd6_ra_input __P((struct mbuf *, int, int));
-void prelist_del __P((struct nd_prefix *));
-void defrouter_addreq __P((struct nd_defrouter *));
-void defrouter_delreq __P((struct nd_defrouter *, int));
-void defrouter_select __P((void));
-void defrtrlist_del __P((struct nd_defrouter *));
-void prelist_remove __P((struct nd_prefix *));
-int prelist_update __P((struct nd_prefix *, struct nd_defrouter *,
-			struct mbuf *));
-int nd6_prelist_add __P((struct nd_prefix *, struct nd_defrouter *,
-			 struct nd_prefix **));
-int nd6_prefix_onlink __P((struct nd_prefix *));
-int nd6_prefix_offlink __P((struct nd_prefix *));
-void pfxlist_onlink_check __P((void));
-struct nd_defrouter *defrouter_lookup __P((struct in6_addr *,
-					   struct ifnet *));
-struct nd_prefix *nd6_prefix_lookup __P((struct nd_prefix *));
-int in6_init_prefix_ltimes __P((struct nd_prefix *ndpr));
-void rt6_flush __P((struct in6_addr *, struct ifnet *));
-int nd6_setdefaultiface __P((int));
-int in6_tmpifadd __P((const struct in6_ifaddr *, int));
-
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_ND6_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/pim6.h b/newlib/libc/sys/linux/include/netinet6/pim6.h
deleted file mode 100644
index b5c5fd8b2..000000000
--- a/newlib/libc/sys/linux/include/netinet6/pim6.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/pim6.h,v 1.2 2000/07/04 16:35:10 itojun Exp $	*/
-/*	$KAME: pim6.h,v 1.3 2000/03/25 07:23:58 sumikawa Exp $	*/
-
-/*
- * Copyright (C) 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * Protocol Independent Multicast (PIM) definitions
- *
- * Written by Ahmed Helmy, SGI, July 1996
- *
- * MULTICAST
- */
-
-/*
- * PIM packet header
- */
-#define PIM_VERSION	2
-struct pim {
-#if defined(BYTE_ORDER) && (BYTE_ORDER == LITTLE_ENDIAN)
-	u_char	pim_type:4, /* the PIM message type, currently they are:
-			     * Hello, Register, Register-Stop, Join/Prune,
-			     * Bootstrap, Assert, Graft (PIM-DM only),
-			     * Graft-Ack (PIM-DM only), C-RP-Adv
-			     */
-		pim_ver:4;  /* PIM version number; 2 for PIMv2 */
-#else
-	u_char	pim_ver:4,	/* PIM version */
-		pim_type:4;	/* PIM type    */
-#endif
-	u_char  pim_rsv;	/* Reserved */
-	u_short	pim_cksum;	/* IP style check sum */
-};
-
-#define PIM_MINLEN	8		/* The header min. length is 8    */
-#define PIM6_REG_MINLEN	(PIM_MINLEN+40)	/* Register message + inner IP6 header */
-
-/*
- * Message types
- */
-#define PIM_REGISTER	1	/* PIM Register type is 1 */
-
-/* second bit in reg_head is the null bit */
-#define PIM_NULL_REGISTER 0x40000000
diff --git a/newlib/libc/sys/linux/include/netinet6/pim6_var.h b/newlib/libc/sys/linux/include/netinet6/pim6_var.h
deleted file mode 100644
index 6fe6f6abe..000000000
--- a/newlib/libc/sys/linux/include/netinet6/pim6_var.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/pim6_var.h,v 1.3 2000/07/04 16:35:10 itojun Exp $	*/
-/*	$KAME: pim6_var.h,v 1.8 2000/06/06 08:07:43 jinmei Exp $	*/
-
-/*
- * Copyright (C) 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_PIM6_VAR_H_
-#define _NETINET6_PIM6_VAR_H_
-
-/*
- * Protocol Independent Multicast (PIM),
- * implementation-specific definitions.
- *
- * Written by George Edmond Eddy (Rusty), ISI, February 1998
- * Modified by Pavlin Ivanov Radoslavov, USC/ISI, May 1998
- */
-
-struct pim6stat {
-	u_quad_t pim6s_rcv_total;	/* total PIM messages received	*/
-	u_quad_t pim6s_rcv_tooshort;	/* received with too few bytes	*/
-	u_quad_t pim6s_rcv_badsum;	/* received with bad checksum	*/
-	u_quad_t pim6s_rcv_badversion;	/* received bad PIM version	*/
-	u_quad_t pim6s_rcv_registers;	/* received registers		*/
-	u_quad_t pim6s_rcv_badregisters; /* received invalid registers	*/
-	u_quad_t pim6s_snd_registers;	/* sent registers		*/
-};
-
-#if (defined(KERNEL)) || (defined(_KERNEL))
-extern struct pim6stat pim6stat;
-
-int pim6_input __P((struct mbuf **, int*, int));
-#endif /* KERNEL */
-
-/*
- * Names for PIM sysctl objects
- */
-#define PIM6CTL_STATS		1	/* statistics (read-only) */
-#define PIM6CTL_MAXID		2
-
-#define PIM6CTL_NAMES { \
-	{ 0, 0 }, \
-	{ 0, 0 }, \
-}
-#endif /* _NETINET6_PIM6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/raw_ip6.h b/newlib/libc/sys/linux/include/netinet6/raw_ip6.h
deleted file mode 100644
index 7efd75dcb..000000000
--- a/newlib/libc/sys/linux/include/netinet6/raw_ip6.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/raw_ip6.h,v 1.1 2001/06/11 12:39:06 ume Exp $	*/
-/*	$KAME: raw_ip6.h,v 1.2 2001/05/27 13:28:35 itojun Exp $	*/
-
-/*
- * Copyright (C) 2001 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_RAW_IP6_H_
-#define _NETINET6_RAW_IP6_H_
-
-/*
- * ICMPv6 stat is counted separately.  see netinet/icmp6.h
- */
-struct rip6stat {
-	u_quad_t rip6s_ipackets;	/* total input packets */
-	u_quad_t rip6s_isum;		/* input checksum computations */
-	u_quad_t rip6s_badsum;		/* of above, checksum error */
-	u_quad_t rip6s_nosock;		/* no matching socket */
-	u_quad_t rip6s_nosockmcast;	/* of above, arrived as multicast */
-	u_quad_t rip6s_fullsock;	/* not delivered, input socket full */
-
-	u_quad_t rip6s_opackets;	/* total output packets */
-};
-
-#ifdef _KERNEL
-extern struct rip6stat rip6stat;
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netinet6/scope6_var.h b/newlib/libc/sys/linux/include/netinet6/scope6_var.h
deleted file mode 100644
index 4f66c53f8..000000000
--- a/newlib/libc/sys/linux/include/netinet6/scope6_var.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*	$FreeBSD: src/sys/netinet6/scope6_var.h,v 1.1 2000/07/04 16:35:10 itojun Exp $	*/
-/*	$KAME: scope6_var.h,v 1.4 2000/05/18 15:03:27 jinmei Exp $	*/
-
-/*
- * Copyright (C) 2000 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _NETINET6_SCOPE6_VAR_H_
-#define _NETINET6_SCOPE6_VAR_H_
-
-#ifdef _KERNEL
-void	scope6_ifattach __P((struct ifnet *));
-int	scope6_set __P((struct ifnet *, u_int32_t *));
-int	scope6_get __P((struct ifnet *, u_int32_t *));
-void	scope6_setdefault __P((struct ifnet *));
-int	scope6_get_default __P((u_int32_t *));
-u_int32_t scope6_in6_addrscope __P((struct in6_addr *));
-u_int32_t scope6_addr2default __P((struct in6_addr *));
-#endif /* _KERNEL */
-
-#endif /* _NETINET6_SCOPE6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/tcp6_var.h b/newlib/libc/sys/linux/include/netinet6/tcp6_var.h
deleted file mode 100644
index 62541ef00..000000000
--- a/newlib/libc/sys/linux/include/netinet6/tcp6_var.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/netinet6/tcp6_var.h,v 1.5 2001/11/22 04:50:44 jlemon Exp $
- */
-
-/*
- * Copyright (c) 1982, 1986, 1993, 1994, 1995
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)tcp_var.h	8.4 (Berkeley) 5/24/95
- * $FreeBSD: src/sys/netinet6/tcp6_var.h,v 1.5 2001/11/22 04:50:44 jlemon Exp $
- */
-
-#ifndef _NETINET_TCP6_VAR_H_
-#define _NETINET_TCP6_VAR_H_
-
-#ifdef _KERNEL
-#ifdef SYSCTL_DECL
-SYSCTL_DECL(_net_inet6_tcp6);
-#endif
-
-extern	int tcp_v6mssdflt;	/* XXX */
-
-struct	ip6_hdr;
-void	tcp6_ctlinput __P((int, struct sockaddr *, void *));
-void	tcp6_init __P((void));
-int	tcp6_input __P((struct mbuf **, int *, int));
-struct	rtentry *tcp_rtlookup6(struct in_conninfo *);
-
-extern struct	pr_usrreqs tcp6_usrreqs;
-
-#endif /* _KERNEL */
-
-#endif /* _NETINET_TCP6_VAR_H_ */
diff --git a/newlib/libc/sys/linux/include/netinet6/udp6_var.h b/newlib/libc/sys/linux/include/netinet6/udp6_var.h
deleted file mode 100644
index 222d6443a..000000000
--- a/newlib/libc/sys/linux/include/netinet6/udp6_var.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/netinet6/udp6_var.h,v 1.5 2001/09/12 08:37:55 julian Exp $
- */
-
-/*
- * Copyright (c) 1982, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)udp_var.h	8.1 (Berkeley) 6/10/93
- */
-
-#ifndef _NETINET6_UDP6_VAR_H_
-#define _NETINET6_UDP6_VAR_H_
-
-#ifdef _KERNEL
-SYSCTL_DECL(_net_inet6_udp6);
-
-extern struct	pr_usrreqs udp6_usrreqs;
-
-void	udp6_ctlinput __P((int, struct sockaddr *, void *));
-int	udp6_input __P((struct mbuf **, int *, int));
-int	udp6_output __P((struct inpcb *inp, struct mbuf *m,
-			struct sockaddr *addr, struct mbuf *control,
-			struct thread *td));
-#endif
-
-#endif /*_NETINET6_UDP6_VAR_H_*/
diff --git a/newlib/libc/sys/linux/include/netns/idp.h b/newlib/libc/sys/linux/include/netns/idp.h
deleted file mode 100644
index 05cd4252b..000000000
--- a/newlib/libc/sys/linux/include/netns/idp.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)idp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/idp.h,v 1.8 1999/08/28 00:49:46 peter Exp $
- */
-
-#ifndef _NETNS_IDP_H_
-#define _NETNS_IDP_H_
-
-/*
- * Definitions for NS(tm) Internet Datagram Protocol
- */
-struct idp {
-	u_short	idp_sum;	/* Checksum */
-	u_short	idp_len;	/* Length, in bytes, including header */
-	u_char	idp_tc;		/* Transport Control (i.e. hop count) */
-	u_char	idp_pt;		/* Packet Type (i.e. level 2 protocol) */
-	struct ns_addr	idp_dna;	/* Destination Network Address */
-	struct ns_addr	idp_sna;	/* Source Network Address */
-};
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/idp_var.h b/newlib/libc/sys/linux/include/netns/idp_var.h
deleted file mode 100644
index aaeb1e028..000000000
--- a/newlib/libc/sys/linux/include/netns/idp_var.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)idp_var.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/idp_var.h,v 1.10 1999/12/29 04:46:18 peter Exp $
- */
-
-#ifndef _NETNS_IDP_VAR_H_
-#define _NETNS_IDP_VAR_H_
-
-/*
- * IDP Kernel Structures and Variables
- */
-struct	idpstat {
-	int	idps_badsum;		/* checksum bad */
-	int	idps_tooshort;		/* packet too short */
-	int	idps_toosmall;		/* not enough data */
-	int	idps_badhlen;		/* ip header length < data size */
-	int	idps_badlen;		/* ip length < ip header length */
-};
-
-#ifdef _KERNEL
-struct	idpstat	idpstat;
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/ns.h b/newlib/libc/sys/linux/include/netns/ns.h
deleted file mode 100644
index 94c801713..000000000
--- a/newlib/libc/sys/linux/include/netns/ns.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ns.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/ns.h,v 1.15 2002/03/20 02:39:27 alfred Exp $
- */
-
-#ifndef _NETNS_NS_H_
-#define _NETNS_NS_H_
-
-/*
- * Constants and Structures defined by the Xerox Network Software
- * per "Internet Transport Protocols", XSIS 028112, December 1981
- */
-
-/*
- * Protocols
- */
-#define NSPROTO_RI	1		/* Routing Information */
-#define NSPROTO_ECHO	2		/* Echo Protocol */
-#define NSPROTO_ERROR	3		/* Error Protocol */
-#define NSPROTO_PE	4		/* Packet Exchange */
-#define NSPROTO_SPP	5		/* Sequenced Packet */
-#define NSPROTO_RAW	255		/* Placemarker*/
-#define NSPROTO_MAX	256		/* Placemarker*/
-
-
-/*
- * Port/Socket numbers: network standard functions
- */
-
-#define NSPORT_RI	1		/* Routing Information */
-#define NSPORT_ECHO	2		/* Echo */
-#define NSPORT_RE	3		/* Router Error */
-
-/*
- * Ports < NSPORT_RESERVED are reserved for priveleged
- * processes (e.g. root).
- */
-#define NSPORT_RESERVED		3000
-
-/* flags passed to ns_output as last parameter */
-
-#define	NS_FORWARDING		0x1	/* most of idp header exists */
-#define	NS_ROUTETOIF		0x10	/* same as SO_DONTROUTE */
-#define	NS_ALLOWBROADCAST	SO_BROADCAST	/* can send broadcast packets */
-
-#define NS_MAXHOPS		15
-
-/* flags passed to get/set socket option */
-#define	SO_HEADERS_ON_INPUT	1
-#define	SO_HEADERS_ON_OUTPUT	2
-#define	SO_DEFAULT_HEADERS	3
-#define	SO_LAST_HEADER		4
-#define	SO_NSIP_ROUTE		5
-#define SO_SEQNO		6
-#define	SO_ALL_PACKETS		7
-#define SO_MTU			8
-
-
-/*
- * NS addressing
- */
-union ns_host {
-	u_char	c_host[6];
-	u_short	s_host[3];
-};
-
-union ns_net {
-	u_char	c_net[4];
-	u_short	s_net[2];
-};
-
-union ns_net_u {
-	union ns_net	net_e;
-	u_long		long_e;
-};
-
-struct ns_addr {
-	union ns_net	x_net;
-	union ns_host	x_host;
-	u_short	x_port;
-};
-
-/*
- * Socket address, Xerox style
- */
-struct sockaddr_ns {
-	u_char		sns_len;
-	u_char		sns_family;
-	struct ns_addr	sns_addr;
-	char		sns_zero[2];
-};
-#define sns_port sns_addr.x_port
-
-#define ns_neteqnn(a,b) (((a).s_net[0]==(b).s_net[0]) && \
-					((a).s_net[1]==(b).s_net[1]))
-#define ns_neteq(a,b) ns_neteqnn((a).x_net, (b).x_net)
-#define satons_addr(sa)	(((struct sockaddr_ns *)&(sa))->sns_addr)
-#define ns_hosteqnh(s,t) ((s).s_host[0] == (t).s_host[0] && \
-	(s).s_host[1] == (t).s_host[1] && (s).s_host[2] == (t).s_host[2])
-#define ns_hosteq(s,t) (ns_hosteqnh((s).x_host,(t).x_host))
-#define ns_nullhost(x) (((x).x_host.s_host[0]==0) && \
-	((x).x_host.s_host[1]==0) && ((x).x_host.s_host[2]==0))
-
-#ifdef _KERNEL
-extern struct domain nsdomain;
-union ns_host ns_thishost;
-union ns_host ns_zerohost;
-union ns_host ns_broadhost;
-union ns_net ns_zeronet;
-union ns_net ns_broadnet;
-u_short ns_cksum();
-#else
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-extern struct ns_addr ns_addr(const char *);
-extern char *ns_ntoa(struct ns_addr);
-__END_DECLS
-
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/ns_error.h b/newlib/libc/sys/linux/include/netns/ns_error.h
deleted file mode 100644
index ae4474722..000000000
--- a/newlib/libc/sys/linux/include/netns/ns_error.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (c) 1984, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ns_error.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/ns_error.h,v 1.10 1999/12/29 04:46:19 peter Exp $
- */
-
-#ifndef _NETNS_NS_ERROR_H_
-#define _NETNS_NS_ERROR_H_
-
-/*
- * Xerox NS error messages
- */
-
-struct ns_errp {
-	u_short		ns_err_num;		/* Error Number */
-	u_short		ns_err_param;		/* Error Parameter */
-	struct idp	ns_err_idp;		/* Initial segment of offending
-						   packet */
-	u_char		ns_err_lev2[12];	/* at least this much higher
-						   level protocol */
-};
-struct  ns_epidp {
-	struct idp ns_ep_idp;
-	struct ns_errp ns_ep_errp;
-};
-
-#define	NS_ERR_UNSPEC	0	/* Unspecified Error detected at dest. */
-#define	NS_ERR_BADSUM	1	/* Bad Checksum detected at dest */
-#define	NS_ERR_NOSOCK	2	/* Specified socket does not exist at dest*/
-#define	NS_ERR_FULLUP	3	/* Dest. refuses packet due to resource lim.*/
-#define	NS_ERR_UNSPEC_T	0x200	/* Unspec. Error occured before reaching dest*/
-#define	NS_ERR_BADSUM_T	0x201	/* Bad Checksum detected in transit */
-#define	NS_ERR_UNREACH_HOST	0x202	/* Dest cannot be reached from here*/
-#define	NS_ERR_TOO_OLD	0x203	/* Packet x'd 15 routers without delivery*/
-#define	NS_ERR_TOO_BIG	0x204	/* Packet too large to be forwarded through
-				   some intermediate gateway.  The error
-				   parameter field contains the max packet
-				   size that can be accommodated */
-#define NS_ERR_MAX 20
-
-/*
- * Variables related to this implementation
- * of the network systems error message protocol.
- */
-struct	ns_errstat {
-/* statistics related to ns_err packets generated */
-	int	ns_es_error;		/* # of calls to ns_error */
-	int	ns_es_oldshort;		/* no error 'cuz old ip too short */
-	int	ns_es_oldns_err;	/* no error 'cuz old was ns_err */
-	int	ns_es_outhist[NS_ERR_MAX];
-/* statistics related to input messages processed */
-	int	ns_es_badcode;		/* ns_err_code out of range */
-	int	ns_es_tooshort;		/* packet < IDP_MINLEN */
-	int	ns_es_checksum;		/* bad checksum */
-	int	ns_es_badlen;		/* calculated bound mismatch */
-	int	ns_es_reflect;		/* number of responses */
-	int	ns_es_inhist[NS_ERR_MAX];
-	u_short	ns_es_codes[NS_ERR_MAX];/* which error code for outhist
-					   since we might not know all */
-};
-
-#ifdef _KERNEL
-struct	ns_errstat ns_errstat;
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/ns_if.h b/newlib/libc/sys/linux/include/netns/ns_if.h
deleted file mode 100644
index 4487b44f6..000000000
--- a/newlib/libc/sys/linux/include/netns/ns_if.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ns_if.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/ns_if.h,v 1.13 2002/03/20 02:39:27 alfred Exp $
- */
-
-#ifndef _NETNS_NS_IF_H_
-#define _NETNS_NS_IF_H_
-
-/*
- * Interface address, xerox version.  One of these structures
- * is allocated for each interface with an internet address.
- * The ifaddr structure contains the protocol-independent part
- * of the structure and is assumed to be first.
- */
-
-struct ns_ifaddr {
-	struct	ifaddr ia_ifa;		/* protocol-independent info */
-#define	ia_ifp		ia_ifa.ifa_ifp
-#define	ia_flags	ia_ifa.ifa_flags
-	struct	ns_ifaddr *ia_next;	/* next in list of xerox addresses */
-	struct	sockaddr_ns ia_addr;	/* reserve space for my address */
-	struct	sockaddr_ns ia_dstaddr;	/* space for my broadcast address */
-#define ia_broadaddr	ia_dstaddr
-	struct	sockaddr_ns ia_netmask;	/* space for my network mask */
-};
-
-struct	ns_aliasreq {
-	char	ifra_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	struct	sockaddr_ns ifra_addr;
-	struct	sockaddr_ns ifra_broadaddr;
-#define ifra_dstaddr ifra_broadaddr
-};
-/*
- * Given a pointer to an ns_ifaddr (ifaddr),
- * return a pointer to the addr as a sockadd_ns.
- */
-
-#define	IA_SNS(ia) (&(((struct ns_ifaddr *)(ia))->ia_addr))
-
-/* This is not the right place for this but where is? */
-#define	ETHERTYPE_NS	0x0600
-
-#ifdef	NSIP
-struct nsip_req {
-	struct sockaddr rq_ns;	/* must be ns format destination */
-	struct sockaddr rq_ip;	/* must be ip format gateway */
-	short rq_flags;
-};
-#endif
-
-#ifdef	_KERNEL
-struct	ns_ifaddr *ns_ifaddr;
-struct	ns_ifaddr *ns_iaonnetof();
-void	nsintr(void);
-struct	ifqueue	nsintrq;	/* XNS input packet queue */
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/ns_pcb.h b/newlib/libc/sys/linux/include/netns/ns_pcb.h
deleted file mode 100644
index 359d839c0..000000000
--- a/newlib/libc/sys/linux/include/netns/ns_pcb.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ns_pcb.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/ns_pcb.h,v 1.11 1999/12/29 04:46:20 peter Exp $
- */
-
-#ifndef _NETNS_NS_PCB_H_
-#define _NETNS_NS_PCB_H_
-
-/*
- * Ns protocol interface control block.
- */
-struct nspcb {
-	struct	nspcb *nsp_next;	/* doubly linked list */
-	struct	nspcb *nsp_prev;
-	struct	socket *nsp_socket;	/* back pointer to socket */
-	struct	ns_addr nsp_faddr;	/* destination address */
-	struct	ns_addr nsp_laddr;	/* socket's address */
-	caddr_t	nsp_pcb;		/* protocol specific stuff */
-	struct	route nsp_route;	/* routing information */
-	struct	ns_addr nsp_lastdst;	/* validate cached route for dg socks*/
-	long	nsp_notify_param;	/* extra info passed via ns_pcbnotify*/
-	short	nsp_flags;
-	u_char	nsp_dpt;		/* default packet type for idp_output*/
-	u_char	nsp_rpt;		/* last received packet type by
-								idp_input() */
-};
-
-/* possible flags */
-
-#define NSP_IN_ABORT	0x1		/* calling abort through socket */
-#define NSP_RAWIN	0x2		/* show headers on input */
-#define NSP_RAWOUT	0x4		/* show header on output */
-#define NSP_ALL_PACKETS	0x8		/* Turn off higher proto processing */
-
-#define	NS_WILDCARD	1
-
-#define nsp_lport nsp_laddr.x_port
-#define nsp_fport nsp_faddr.x_port
-
-#define	sotonspcb(so)		((struct nspcb *)((so)->so_pcb))
-
-/*
- * Nominal space allocated to a ns socket.
- */
-#define	NSSNDQ		2048
-#define	NSRCVQ		2048
-
-
-#ifdef _KERNEL
-struct	nspcb nspcb;			/* head of list */
-struct	nspcb *ns_pcblookup();
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/sp.h b/newlib/libc/sys/linux/include/netns/sp.h
deleted file mode 100644
index 90f26c93d..000000000
--- a/newlib/libc/sys/linux/include/netns/sp.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)sp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/sp.h,v 1.8 1999/08/28 00:49:52 peter Exp $
- */
-
-#ifndef _NETNS_SP_H_
-#define _NETNS_SP_H_
-
-/*
- * Definitions for Xerox NS style sequenced packet protocol
- */
-
-struct sphdr {
-	u_char	sp_cc;		/* connection control */
-	u_char	sp_dt;		/* datastream type */
-#define	SP_SP	0x80		/* system packet */
-#define	SP_SA	0x40		/* send acknowledgement */
-#define	SP_OB	0x20		/* attention (out of band data) */
-#define	SP_EM	0x10		/* end of message */
-	u_short	sp_sid;		/* source connection identifier */
-	u_short	sp_did;		/* destination connection identifier */
-	u_short	sp_seq;		/* sequence number */
-	u_short	sp_ack;		/* acknowledge number */
-	u_short	sp_alo;		/* allocation number */
-};
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/spidp.h b/newlib/libc/sys/linux/include/netns/spidp.h
deleted file mode 100644
index 310a2b204..000000000
--- a/newlib/libc/sys/linux/include/netns/spidp.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)spidp.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/spidp.h,v 1.8 1999/08/28 00:49:52 peter Exp $
- */
-
-#ifndef _NETNS_SPIDP_H_
-#define _NETNS_SPIDP_H_
-
-/*
- * Definitions for NS(tm) Internet Datagram Protocol
- * containing a Sequenced Packet Protocol packet.
- */
-struct spidp {
-	struct idp	si_i;
-	struct sphdr 	si_s;
-};
-struct spidp_q {
-	struct spidp_q	*si_next;
-	struct spidp_q	*si_prev;
-};
-#define SI(x)	((struct spidp *)x)
-#define si_sum	si_i.idp_sum
-#define si_len	si_i.idp_len
-#define si_tc	si_i.idp_tc
-#define si_pt	si_i.idp_pt
-#define si_dna	si_i.idp_dna
-#define si_sna	si_i.idp_sna
-#define si_sport	si_i.idp_sna.x_port
-#define si_cc	si_s.sp_cc
-#define si_dt	si_s.sp_dt
-#define si_sid	si_s.sp_sid
-#define si_did	si_s.sp_did
-#define si_seq	si_s.sp_seq
-#define si_ack	si_s.sp_ack
-#define si_alo	si_s.sp_alo
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/spp_debug.h b/newlib/libc/sys/linux/include/netns/spp_debug.h
deleted file mode 100644
index f85cc3901..000000000
--- a/newlib/libc/sys/linux/include/netns/spp_debug.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)spp_debug.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/spp_debug.h,v 1.9 1999/08/28 00:49:53 peter Exp $
- */
-
-#ifndef _NETNS_SPP_DEBUG_H_
-#define _NETNS_SPP_DEBUG_H_
-
-struct	spp_debug {
-	u_long	sd_time;
-	short	sd_act;
-	short	sd_ostate;
-	caddr_t	sd_cb;
-	short	sd_req;
-	struct	spidp sd_si;
-	struct	sppcb sd_sp;
-};
-
-#define	SA_INPUT 	0
-#define	SA_OUTPUT	1
-#define	SA_USER		2
-#define	SA_RESPOND	3
-#define	SA_DROP		4
-
-#ifdef SANAMES
-char	*sanames[] =
-    { "input", "output", "user", "respond", "drop" };
-#endif
-
-#define	SPP_NDEBUG 100
-struct	spp_debug spp_debug[SPP_NDEBUG];
-int	spp_debx;
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/spp_timer.h b/newlib/libc/sys/linux/include/netns/spp_timer.h
deleted file mode 100644
index e28ecad7f..000000000
--- a/newlib/libc/sys/linux/include/netns/spp_timer.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 1982, 1986, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)spp_timer.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/spp_timer.h,v 1.9 1999/12/29 04:46:20 peter Exp $
- */
-
-#ifndef _NETNS_SPP_TIMER_H_
-#define _NETNS_SPP_TIMER_H_
-
-/*
- * Definitions of the SPP timers.  These timers are counted
- * down PR_SLOWHZ times a second.
- */
-#define	SPPT_NTIMERS	4
-
-#define	SPPT_REXMT	0		/* retransmit */
-#define	SPPT_PERSIST	1		/* retransmit persistance */
-#define	SPPT_KEEP	2		/* keep alive */
-#define	SPPT_2MSL	3		/* 2*msl quiet time timer */
-
-/*
- * The SPPT_REXMT timer is used to force retransmissions.
- * The SPP has the SPPT_REXMT timer set whenever segments
- * have been sent for which ACKs are expected but not yet
- * received.  If an ACK is received which advances tp->snd_una,
- * then the retransmit timer is cleared (if there are no more
- * outstanding segments) or reset to the base value (if there
- * are more ACKs expected).  Whenever the retransmit timer goes off,
- * we retransmit one unacknowledged segment, and do a backoff
- * on the retransmit timer.
- *
- * The SPPT_PERSIST timer is used to keep window size information
- * flowing even if the window goes shut.  If all previous transmissions
- * have been acknowledged (so that there are no retransmissions in progress),
- * and the window is too small to bother sending anything, then we start
- * the SPPT_PERSIST timer.  When it expires, if the window is nonzero,
- * we go to transmit state.  Otherwise, at intervals send a single byte
- * into the peer's window to force him to update our window information.
- * We do this at most as often as SPPT_PERSMIN time intervals,
- * but no more frequently than the current estimate of round-trip
- * packet time.  The SPPT_PERSIST timer is cleared whenever we receive
- * a window update from the peer.
- *
- * The SPPT_KEEP timer is used to keep connections alive.  If an
- * connection is idle (no segments received) for SPPTV_KEEP amount of time,
- * but not yet established, then we drop the connection.  If the connection
- * is established, then we force the peer to send us a segment by sending:
- *	<SEQ=SND.UNA-1><ACK=RCV.NXT><CTL=ACK>
- * This segment is (deliberately) outside the window, and should elicit
- * an ack segment in response from the peer.  If, despite the SPPT_KEEP
- * initiated segments we cannot elicit a response from a peer in SPPT_MAXIDLE
- * amount of time, then we drop the connection.
- */
-
-#define	SPP_TTL		30		/* default time to live for SPP segs */
-/*
- * Time constants.
- */
-#define	SPPTV_MSL	( 15*PR_SLOWHZ)		/* max seg lifetime */
-#define	SPPTV_SRTTBASE	0			/* base roundtrip time;
-						   if 0, no idea yet */
-#define	SPPTV_SRTTDFLT	(  3*PR_SLOWHZ)		/* assumed RTT if no info */
-
-#define	SPPTV_PERSMIN	(  5*PR_SLOWHZ)		/* retransmit persistance */
-#define	SPPTV_PERSMAX	( 60*PR_SLOWHZ)		/* maximum persist interval */
-
-#define	SPPTV_KEEP	( 75*PR_SLOWHZ)		/* keep alive - 75 secs */
-#define	SPPTV_MAXIDLE	(  8*SPPTV_KEEP)	/* maximum allowable idle
-						   time before drop conn */
-
-#define	SPPTV_MIN	(  1*PR_SLOWHZ)		/* minimum allowable value */
-#define	SPPTV_REXMTMAX	( 64*PR_SLOWHZ)		/* max allowable REXMT value */
-
-#define	SPP_LINGERTIME	120			/* linger at most 2 minutes */
-
-#define	SPP_MAXRXTSHIFT	12			/* maximum retransmits */
-
-#ifdef	SPPTIMERS
-char *spptimers[] =
-    { "REXMT", "PERSIST", "KEEP", "2MSL" };
-#endif
-
-/*
- * Force a time value to be in a certain range.
- */
-#define	SPPT_RANGESET(tv, value, tvmin, tvmax) { \
-	(tv) = (value); \
-	if ((tv) < (tvmin)) \
-		(tv) = (tvmin); \
-	else if ((tv) > (tvmax)) \
-		(tv) = (tvmax); \
-}
-
-#ifdef _KERNEL
-extern int spp_backoff[];
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/netns/spp_var.h b/newlib/libc/sys/linux/include/netns/spp_var.h
deleted file mode 100644
index ed1ec050d..000000000
--- a/newlib/libc/sys/linux/include/netns/spp_var.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (c) 1984, 1985, 1986, 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)spp_var.h	8.1 (Berkeley) 6/10/93
- * $FreeBSD: src/sys/netns/spp_var.h,v 1.11 1999/12/29 04:46:21 peter Exp $
- */
-
-#ifndef _NETNS_SPP_VAR_H_
-#define _NETNS_SPP_VAR_H_
-
-/*
- * Sp control block, one per connection
- */
-struct sppcb {
-	struct	spidp_q	s_q;		/* queue for out-of-order receipt */
-	struct	nspcb	*s_nspcb;	/* backpointer to internet pcb */
-	u_char	s_state;
-	u_char	s_flags;
-#define	SF_ACKNOW	0x01		/* Ack peer immediately */
-#define	SF_DELACK	0x02		/* Ack, but try to delay it */
-#define	SF_HI	0x04			/* Show headers on input */
-#define	SF_HO	0x08			/* Show headers on output */
-#define	SF_PI	0x10			/* Packet (datagram) interface */
-#define SF_WIN	0x20			/* Window info changed */
-#define SF_RXT	0x40			/* Rxt info changed */
-#define SF_RVD	0x80			/* Calling from read usrreq routine */
-	u_short s_mtu;			/* Max packet size for this stream */
-/* use sequence fields in headers to store sequence numbers for this
-   connection */
-	struct	idp	*s_idp;
-	struct	sphdr	s_shdr;		/* prototype header to transmit */
-#define s_cc s_shdr.sp_cc		/* connection control (for EM bit) */
-#define s_dt s_shdr.sp_dt		/* datastream type */
-#define s_sid s_shdr.sp_sid		/* source connection identifier */
-#define s_did s_shdr.sp_did		/* destination connection identifier */
-#define s_seq s_shdr.sp_seq		/* sequence number */
-#define s_ack s_shdr.sp_ack		/* acknowledge number */
-#define s_alo s_shdr.sp_alo		/* allocation number */
-#define s_dport s_idp->idp_dna.x_port	/* where we are sending */
-	struct sphdr s_rhdr;		/* last received header (in effect!)*/
-	u_short s_rack;			/* their acknowledge number */
-	u_short s_ralo;			/* their allocation number */
-	u_short s_smax;			/* highest packet # we have sent */
-	u_short	s_snxt;			/* which packet to send next */
-
-/* congestion control */
-#define	CUNIT	1024			/* scaling for ... */
-	int	s_cwnd;			/* Congestion-controlled window */
-					/* in packets * CUNIT */
-	short	s_swnd;			/* == tcp snd_wnd, in packets */
-	short	s_smxw;			/* == tcp max_sndwnd */
-					/* difference of two spp_seq's can be
-					   no bigger than a short */
-	u_short	s_swl1;			/* == tcp snd_wl1 */
-	u_short	s_swl2;			/* == tcp snd_wl2 */
-	int	s_cwmx;			/* max allowable cwnd */
-	int	s_ssthresh;		/* s_cwnd size threshhold for
-					 * slow start exponential-to-
-					 * linear switch */
-/* transmit timing stuff
- * srtt and rttvar are stored as fixed point, for convenience in smoothing.
- * srtt has 3 bits to the right of the binary point, rttvar has 2.
- */
-	short	s_idle;			/* time idle */
-	short	s_timer[SPPT_NTIMERS];	/* timers */
-	short	s_rxtshift;		/* log(2) of rexmt exp. backoff */
-	short	s_rxtcur;		/* current retransmit value */
-	u_short	s_rtseq;		/* packet being timed */
-	short	s_rtt;			/* timer for round trips */
-	short	s_srtt;			/* averaged timer */
-	short	s_rttvar;		/* variance in round trip time */
-	char	s_force;		/* which timer expired */
-	char	s_dupacks;		/* counter to intuit xmt loss */
-
-/* out of band data */
-	char	s_oobflags;
-#define SF_SOOB	0x08			/* sending out of band data */
-#define SF_IOOB 0x10			/* receiving out of band data */
-	char	s_iobc;			/* input characters */
-/* debug stuff */
-	u_short	s_want;			/* Last candidate for sending */
-	char	s_outx;			/* exit taken from spp_output */
-	char	s_inx;			/* exit taken from spp_input */
-	u_short	s_flags2;		/* more flags for testing */
-#define SF_NEWCALL	0x100		/* for new_recvmsg */
-#define SO_NEWCALL	10		/* for new_recvmsg */
-};
-
-#define	nstosppcb(np)	((struct sppcb *)(np)->nsp_pcb)
-#define	sotosppcb(so)	(nstosppcb(sotonspcb(so)))
-
-struct	sppstat {
-	long	spps_connattempt;	/* connections initiated */
-	long	spps_accepts;		/* connections accepted */
-	long	spps_connects;		/* connections established */
-	long	spps_drops;		/* connections dropped */
-	long	spps_conndrops;		/* embryonic connections dropped */
-	long	spps_closed;		/* conn. closed (includes drops) */
-	long	spps_segstimed;		/* segs where we tried to get rtt */
-	long	spps_rttupdated;	/* times we succeeded */
-	long	spps_delack;		/* delayed acks sent */
-	long	spps_timeoutdrop;	/* conn. dropped in rxmt timeout */
-	long	spps_rexmttimeo;	/* retransmit timeouts */
-	long	spps_persisttimeo;	/* persist timeouts */
-	long	spps_keeptimeo;		/* keepalive timeouts */
-	long	spps_keepprobe;		/* keepalive probes sent */
-	long	spps_keepdrops;		/* connections dropped in keepalive */
-
-	long	spps_sndtotal;		/* total packets sent */
-	long	spps_sndpack;		/* data packets sent */
-	long	spps_sndbyte;		/* data bytes sent */
-	long	spps_sndrexmitpack;	/* data packets retransmitted */
-	long	spps_sndrexmitbyte;	/* data bytes retransmitted */
-	long	spps_sndacks;		/* ack-only packets sent */
-	long	spps_sndprobe;		/* window probes sent */
-	long	spps_sndurg;		/* packets sent with URG only */
-	long	spps_sndwinup;		/* window update-only packets sent */
-	long	spps_sndctrl;		/* control (SYN|FIN|RST) packets sent */
-	long	spps_sndvoid;		/* couldn't find requested packet*/
-
-	long	spps_rcvtotal;		/* total packets received */
-	long	spps_rcvpack;		/* packets received in sequence */
-	long	spps_rcvbyte;		/* bytes received in sequence */
-	long	spps_rcvbadsum;		/* packets received with ccksum errs */
-	long	spps_rcvbadoff;		/* packets received with bad offset */
-	long	spps_rcvshort;		/* packets received too short */
-	long	spps_rcvduppack;	/* duplicate-only packets received */
-	long	spps_rcvdupbyte;	/* duplicate-only bytes received */
-	long	spps_rcvpartduppack;	/* packets with some duplicate data */
-	long	spps_rcvpartdupbyte;	/* dup. bytes in part-dup. packets */
-	long	spps_rcvoopack;		/* out-of-order packets received */
-	long	spps_rcvoobyte;		/* out-of-order bytes received */
-	long	spps_rcvpackafterwin;	/* packets with data after window */
-	long	spps_rcvbyteafterwin;	/* bytes rcvd after window */
-	long	spps_rcvafterclose;	/* packets rcvd after "close" */
-	long	spps_rcvwinprobe;	/* rcvd window probe packets */
-	long	spps_rcvdupack;		/* rcvd duplicate acks */
-	long	spps_rcvacktoomuch;	/* rcvd acks for unsent data */
-	long	spps_rcvackpack;	/* rcvd ack packets */
-	long	spps_rcvackbyte;	/* bytes acked by rcvd acks */
-	long	spps_rcvwinupd;		/* rcvd window update packets */
-};
-struct	spp_istat {
-	short	hdrops;
-	short	badsum;
-	short	badlen;
-	short	slotim;
-	short	fastim;
-	short	nonucn;
-	short	noconn;
-	short	notme;
-	short	wrncon;
-	short	bdreas;
-	short	gonawy;
-	short	notyet;
-	short	lstdup;
-	struct sppstat newstats;
-};
-
-#ifdef _KERNEL
-struct spp_istat spp_istat;
-
-/* Following was struct sppstat sppstat; */
-#ifndef sppstat
-#define sppstat spp_istat.newstats
-#endif
-
-u_short spp_iss;
-extern struct sppcb *spp_close(), *spp_disconnect(),
-	*spp_usrclosed(), *spp_timers(), *spp_drop();
-#endif
-
-#define	SPP_ISSINCR	128
-/*
- * SPP sequence numbers are 16 bit integers operated
- * on with modular arithmetic.  These macros can be
- * used to compare such integers.
- */
-#ifdef sun
-short xnsCbug;
-#define	SSEQ_LT(a,b)	((xnsCbug = (short)((a)-(b))) < 0)
-#define	SSEQ_LEQ(a,b)	((xnsCbug = (short)((a)-(b))) <= 0)
-#define	SSEQ_GT(a,b)	((xnsCbug = (short)((a)-(b))) > 0)
-#define	SSEQ_GEQ(a,b)	((xnsCbug = (short)((a)-(b))) >= 0)
-#else
-#define	SSEQ_LT(a,b)	(((short)((a)-(b))) < 0)
-#define	SSEQ_LEQ(a,b)	(((short)((a)-(b))) <= 0)
-#define	SSEQ_GT(a,b)	(((short)((a)-(b))) > 0)
-#define	SSEQ_GEQ(a,b)	(((short)((a)-(b))) >= 0)
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/include/nsswitch.h b/newlib/libc/sys/linux/include/nsswitch.h
deleted file mode 100644
index 3a578e4ff..000000000
--- a/newlib/libc/sys/linux/include/nsswitch.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*	$NetBSD: nsswitch.h,v 1.6 1999/01/26 01:04:07 lukem Exp $	*/
-/*	$FreeBSD: src/include/nsswitch.h,v 1.2 2002/03/23 17:24:53 imp Exp $ */
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NSSWITCH_H
-#define _NSSWITCH_H	1
-
-#include <sys/types.h>
-
-#include <stdarg.h>
-
-#ifndef _PATH_NS_CONF
-#define _PATH_NS_CONF	"/etc/nsswitch.conf"
-#endif
-
-#define	NS_CONTINUE	0
-#define	NS_RETURN	1
-
-#define	NS_SUCCESS	(1<<0)		/* entry was found */
-#define	NS_UNAVAIL	(1<<1)		/* source not responding, or corrupt */
-#define	NS_NOTFOUND	(1<<2)		/* source responded 'no such entry' */
-#define	NS_TRYAGAIN	(1<<3)		/* source busy, may respond to retrys */
-#define	NS_STATUSMASK	0x000000ff	/* bitmask to get the status flags */
-
-/*
- * currently implemented sources
- */
-#define NSSRC_FILES	"files"		/* local files */
-#define	NSSRC_DNS	"dns"		/* DNS; IN for hosts, HS for others */
-#define	NSSRC_NIS	"nis"		/* YP/NIS */
-#define	NSSRC_COMPAT	"compat"	/* passwd,group in YP compat mode */
-
-/*
- * currently implemented databases
- */
-#define NSDB_HOSTS		"hosts"
-#define NSDB_GROUP		"group"
-#define NSDB_GROUP_COMPAT	"group_compat"
-#define NSDB_NETGROUP		"netgroup"
-#define NSDB_NETWORKS		"networks"
-#define NSDB_PASSWD		"passwd"
-#define NSDB_PASSWD_COMPAT	"passwd_compat"
-#define NSDB_SHELLS		"shells"
-
-/*
- * suggested databases to implement
- */
-#define NSDB_ALIASES		"aliases"
-#define NSDB_AUTH		"auth"
-#define NSDB_AUTOMOUNT		"automount"
-#define NSDB_BOOTPARAMS		"bootparams"
-#define NSDB_ETHERS		"ethers"
-#define NSDB_EXPORTS		"exports"
-#define NSDB_NETMASKS		"netmasks"
-#define NSDB_PHONES		"phones"
-#define NSDB_PRINTCAP		"printcap"
-#define NSDB_PROTOCOLS		"protocols"
-#define NSDB_REMOTE		"remote"
-#define NSDB_RPC		"rpc"
-#define NSDB_SENDMAILVARS	"sendmailvars"
-#define NSDB_SERVICES		"services"
-#define NSDB_TERMCAP		"termcap"
-#define NSDB_TTYS		"ttys"
-
-/*
- * ns_dtab - `nsswitch dispatch table'
- * contains an entry for each source and the appropriate function to call
- */
-typedef struct {
-	const char	 *src;
-	int		(*callback)(void *retval, void *cb_data, va_list ap);
-	void		 *cb_data;
-} ns_dtab;
-
-/*
- * macros to help build an ns_dtab[]
- */
-#define NS_FILES_CB(F,C)	{ NSSRC_FILES,	F,	C },
-#define NS_COMPAT_CB(F,C)	{ NSSRC_COMPAT,	F,	C },
- 
-#ifdef HESIOD
-#   define NS_DNS_CB(F,C)	{ NSSRC_DNS,	F,	C },
-#else
-#   define NS_DNS_CB(F,C)
-#endif
-
-#ifdef YP
-#   define NS_NIS_CB(F,C)	{ NSSRC_NIS,	F,	C },
-#else
-#   define NS_NIS_CB(F,C)
-#endif
-
-/*
- * ns_src - `nsswitch source'
- * used by the nsparser routines to store a mapping between a source
- * and its dispatch control flags for a given database.
- */
-typedef struct {
-	const char	*name;
-	u_int32_t	 flags;
-} ns_src;
-
-
-/*
- * default sourcelist (if nsswitch.conf is missing, corrupt,
- * or the requested database doesn't have an entry.
- */
-extern const ns_src __nsdefaultsrc[];
-
-
-#ifdef _NS_PRIVATE
-
-/*
- * private data structures for back-end nsswitch implementation
- */
-
-/*
- * ns_dbt - `nsswitch database thang'
- * for each database in /etc/nsswitch.conf there is a ns_dbt, with its
- * name and a list of ns_src's containing the source information.
- */
-typedef struct {
-	const char	*name;		/* name of database */
-	ns_src		*srclist;	/* list of sources */
-	int		 srclistsize;	/* size of srclist */
-} ns_dbt;
-
-#endif /* _NS_PRIVATE */
-
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-extern	int	nsdispatch(void *, const ns_dtab [], const char *,
-			   const char *, const ns_src [], ...);
-
-#ifdef _NS_PRIVATE
-extern	void		 _nsdbtaddsrc(ns_dbt *, const ns_src *);
-extern	void		 _nsdbtdump(const ns_dbt *);
-extern	const ns_dbt	*_nsdbtget(const char *);
-extern	void		 _nsdbtput(const ns_dbt *);
-extern	void		 _nsyyerror(const char *);
-extern	int		 _nsyylex(void);
-extern	int		 _nsyylineno;
-#endif /* _NS_PRIVATE */
-
-__END_DECLS
-
-#endif /* !_NSSWITCH_H */
diff --git a/newlib/libc/sys/linux/include/paths.h b/newlib/libc/sys/linux/include/paths.h
deleted file mode 100644
index a87831e74..000000000
--- a/newlib/libc/sys/linux/include/paths.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)paths.h	8.1 (Berkeley) 6/2/93
- */
-
-#ifndef _PATHS_H_
-#define	_PATHS_H_
-
-/* Default search path. */
-#define	_PATH_DEFPATH	"/usr/bin:/bin"
-/* All standard utilities path. */
-#define	_PATH_STDPATH \
-	"/usr/bin:/bin:/usr/sbin:/sbin"
-
-#define	_PATH_BSHELL	"/bin/sh"
-#define	_PATH_CONSOLE	"/dev/console"
-#define	_PATH_CSHELL	"/bin/csh"
-#define	_PATH_DEVDB	"/var/run/dev.db"
-#define	_PATH_DEVNULL	"/dev/null"
-#define	_PATH_DRUM	"/dev/drum"
-#define	_PATH_KLOG	"/proc/kmsg"
-#define	_PATH_KMEM	"/dev/kmem"
-#define	_PATH_LASTLOG	"/var/log/lastlog"
-#define	_PATH_MAILDIR	"/var/mail"
-#define	_PATH_MAN	"/usr/share/man"
-#define	_PATH_MEM	"/dev/mem"
-#define	_PATH_MNTTAB	"/etc/fstab"
-#define	_PATH_MOUNTED	"/etc/mtab"
-#define	_PATH_NOLOGIN	"/etc/nologin"
-#define	_PATH_PRESERVE	"/var/lib"
-#define	_PATH_RWHODIR	"/var/spool/rwho"
-#define	_PATH_SENDMAIL	"/usr/sbin/sendmail"
-#define	_PATH_SHADOW	"/etc/shadow"
-#define	_PATH_SHELLS	"/etc/shells"
-#define	_PATH_TTY	"/dev/tty"
-#define	_PATH_UNIX	"/boot/vmlinux"
-#define _PATH_UTMP	"/var/run/utmp"
-#define	_PATH_VI	"/bin/vi"
-#define _PATH_WTMP	"/var/log/wtmp"
-
-/* Provide trailing slash, since mostly used for building pathnames. */
-#define	_PATH_DEV	"/dev/"
-#define	_PATH_TMP	"/tmp/"
-#define	_PATH_VARDB	"/var/db/"
-#define	_PATH_VARRUN	"/var/run/"
-#define	_PATH_VARTMP	"/var/tmp/"
-
-#endif /* !_PATHS_H_ */
diff --git a/newlib/libc/sys/linux/include/pthread.h b/newlib/libc/sys/linux/include/pthread.h
deleted file mode 100644
index d7addbe46..000000000
--- a/newlib/libc/sys/linux/include/pthread.h
+++ /dev/null
@@ -1,682 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#ifndef _PTHREAD_H
-#define _PTHREAD_H	1
-
-#include <features.h>
-
-#include <sched.h>
-#include <time.h>
-
-#define __need_sigset_t
-#include <signal.h>
-#include <bits/pthreadtypes.h>
-#include <bits/initspin.h>
-
-
-__BEGIN_DECLS
-
-/* Initializers.  */
-
-#define PTHREAD_MUTEX_INITIALIZER \
-  {0, 0, 0, PTHREAD_MUTEX_TIMED_NP, __LOCK_INITIALIZER}
-#ifdef __USE_GNU
-# define PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP \
-  {0, 0, 0, PTHREAD_MUTEX_RECURSIVE_NP, __LOCK_INITIALIZER}
-# define PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP \
-  {0, 0, 0, PTHREAD_MUTEX_ERRORCHECK_NP, __LOCK_INITIALIZER}
-# define PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP \
-  {0, 0, 0, PTHREAD_MUTEX_ADAPTIVE_NP, __LOCK_INITIALIZER}
-#endif
-
-#define PTHREAD_COND_INITIALIZER {__LOCK_INITIALIZER, 0}
-
-#ifdef __USE_UNIX98
-# define PTHREAD_RWLOCK_INITIALIZER \
-  { __LOCK_INITIALIZER, 0, NULL, NULL, NULL,				      \
-    PTHREAD_RWLOCK_DEFAULT_NP, PTHREAD_PROCESS_PRIVATE }
-#endif
-#ifdef __USE_GNU
-# define PTHREAD_RWLOCK_WRITER_NONRECURSIVE_INITIALIZER_NP \
-  { __LOCK_INITIALIZER, 0, NULL, NULL, NULL,				      \
-    PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP, PTHREAD_PROCESS_PRIVATE }
-#endif
-
-/* Values for attributes.  */
-
-enum
-{
-  PTHREAD_CREATE_JOINABLE,
-#define PTHREAD_CREATE_JOINABLE	PTHREAD_CREATE_JOINABLE
-  PTHREAD_CREATE_DETACHED
-#define PTHREAD_CREATE_DETACHED	PTHREAD_CREATE_DETACHED
-};
-
-enum
-{
-  PTHREAD_INHERIT_SCHED,
-#define PTHREAD_INHERIT_SCHED	PTHREAD_INHERIT_SCHED
-  PTHREAD_EXPLICIT_SCHED
-#define PTHREAD_EXPLICIT_SCHED	PTHREAD_EXPLICIT_SCHED
-};
-
-enum
-{
-  PTHREAD_SCOPE_SYSTEM,
-#define PTHREAD_SCOPE_SYSTEM	PTHREAD_SCOPE_SYSTEM
-  PTHREAD_SCOPE_PROCESS
-#define PTHREAD_SCOPE_PROCESS	PTHREAD_SCOPE_PROCESS
-};
-
-enum
-{
-  PTHREAD_MUTEX_TIMED_NP,
-  PTHREAD_MUTEX_RECURSIVE_NP,
-  PTHREAD_MUTEX_ERRORCHECK_NP,
-  PTHREAD_MUTEX_ADAPTIVE_NP
-#ifdef __USE_UNIX98
-  ,
-  PTHREAD_MUTEX_NORMAL = PTHREAD_MUTEX_TIMED_NP,
-  PTHREAD_MUTEX_RECURSIVE = PTHREAD_MUTEX_RECURSIVE_NP,
-  PTHREAD_MUTEX_ERRORCHECK = PTHREAD_MUTEX_ERRORCHECK_NP,
-  PTHREAD_MUTEX_DEFAULT = PTHREAD_MUTEX_NORMAL
-#endif
-#ifdef __USE_GNU
-  /* For compatibility.  */
-  , PTHREAD_MUTEX_FAST_NP = PTHREAD_MUTEX_ADAPTIVE_NP
-#endif
-};
-
-enum
-{
-  PTHREAD_PROCESS_PRIVATE,
-#define PTHREAD_PROCESS_PRIVATE	PTHREAD_PROCESS_PRIVATE
-  PTHREAD_PROCESS_SHARED
-#define PTHREAD_PROCESS_SHARED	PTHREAD_PROCESS_SHARED
-};
-
-#ifdef __USE_UNIX98
-enum
-{
-  PTHREAD_RWLOCK_PREFER_READER_NP,
-  PTHREAD_RWLOCK_PREFER_WRITER_NP,
-  PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP,
-  PTHREAD_RWLOCK_DEFAULT_NP = PTHREAD_RWLOCK_PREFER_WRITER_NP
-};
-#endif	/* Unix98 */
-
-#define PTHREAD_ONCE_INIT 0
-
-/* Special constants */
-
-#ifdef __USE_XOPEN2K
-/* -1 is distinct from 0 and all errno constants */
-# define PTHREAD_BARRIER_SERIAL_THREAD -1
-#endif
-
-/* Cleanup buffers */
-
-struct _pthread_cleanup_buffer
-{
-  void (*__routine) (void *);		  /* Function to call.  */
-  void *__arg;				  /* Its argument.  */
-  int __canceltype;			  /* Saved cancellation type. */
-  struct _pthread_cleanup_buffer *__prev; /* Chaining of cleanup functions.  */
-};
-
-/* Cancellation */
-
-enum
-{
-  PTHREAD_CANCEL_ENABLE,
-#define PTHREAD_CANCEL_ENABLE	PTHREAD_CANCEL_ENABLE
-  PTHREAD_CANCEL_DISABLE
-#define PTHREAD_CANCEL_DISABLE	PTHREAD_CANCEL_DISABLE
-};
-enum
-{
-  PTHREAD_CANCEL_DEFERRED,
-#define PTHREAD_CANCEL_DEFERRED	PTHREAD_CANCEL_DEFERRED
-  PTHREAD_CANCEL_ASYNCHRONOUS
-#define PTHREAD_CANCEL_ASYNCHRONOUS	PTHREAD_CANCEL_ASYNCHRONOUS
-};
-#define PTHREAD_CANCELED ((void *) -1)
-
-
-/* Function for handling threads.  */
-
-/* Create a thread with given attributes ATTR (or default attributes
-   if ATTR is NULL), and call function START_ROUTINE with given
-   arguments ARG.  */
-extern int pthread_create (pthread_t *__restrict __thread1,
-			   __const pthread_attr_t *__restrict __attr,
-			   void *(*__start_routine) (void *),
-			   void *__restrict __arg) __THROW;
-
-/* Obtain the identifier of the current thread.  */
-extern pthread_t pthread_self (void) __THROW;
-
-/* Compare two thread identifiers.  */
-extern int pthread_equal (pthread_t __thread1, pthread_t __thread2) __THROW;
-
-/* Terminate calling thread.  */
-extern void pthread_exit (void *__retval)
-     __THROW __attribute__ ((__noreturn__));
-
-/* Make calling thread wait for termination of the thread TH.  The
-   exit status of the thread is stored in *THREAD_RETURN, if THREAD_RETURN
-   is not NULL.  */
-extern int pthread_join (pthread_t __th, void **__thread_return) __THROW;
-
-/* Indicate that the thread TH is never to be joined with PTHREAD_JOIN.
-   The resources of TH will therefore be freed immediately when it
-   terminates, instead of waiting for another thread to perform PTHREAD_JOIN
-   on it.  */
-extern int pthread_detach (pthread_t __th) __THROW;
-
-
-/* Functions for handling attributes.  */
-
-/* Initialize thread attribute *ATTR with default attributes
-   (detachstate is PTHREAD_JOINABLE, scheduling policy is SCHED_OTHER,
-    no user-provided stack).  */
-extern int pthread_attr_init (pthread_attr_t *__attr) __THROW;
-
-/* Destroy thread attribute *ATTR.  */
-extern int pthread_attr_destroy (pthread_attr_t *__attr) __THROW;
-
-/* Set the `detachstate' attribute in *ATTR according to DETACHSTATE.  */
-extern int pthread_attr_setdetachstate (pthread_attr_t *__attr,
-					int __detachstate) __THROW;
-
-/* Return in *DETACHSTATE the `detachstate' attribute in *ATTR.  */
-extern int pthread_attr_getdetachstate (__const pthread_attr_t *__attr,
-					int *__detachstate) __THROW;
-
-/* Set scheduling parameters (priority, etc) in *ATTR according to PARAM.  */
-extern int pthread_attr_setschedparam (pthread_attr_t *__restrict __attr,
-				       __const struct sched_param *__restrict
-				       __param) __THROW;
-
-/* Return in *PARAM the scheduling parameters of *ATTR.  */
-extern int pthread_attr_getschedparam (__const pthread_attr_t *__restrict
-				       __attr,
-				       struct sched_param *__restrict __param)
-     __THROW;
-
-/* Set scheduling policy in *ATTR according to POLICY.  */
-extern int pthread_attr_setschedpolicy (pthread_attr_t *__attr, int __policy)
-     __THROW;
-
-/* Return in *POLICY the scheduling policy of *ATTR.  */
-extern int pthread_attr_getschedpolicy (__const pthread_attr_t *__restrict
-					__attr, int *__restrict __policy)
-     __THROW;
-
-/* Set scheduling inheritance mode in *ATTR according to INHERIT.  */
-extern int pthread_attr_setinheritsched (pthread_attr_t *__attr,
-					 int __inherit) __THROW;
-
-/* Return in *INHERIT the scheduling inheritance mode of *ATTR.  */
-extern int pthread_attr_getinheritsched (__const pthread_attr_t *__restrict
-					 __attr, int *__restrict __inherit)
-     __THROW;
-
-/* Set scheduling contention scope in *ATTR according to SCOPE.  */
-extern int pthread_attr_setscope (pthread_attr_t *__attr, int __scope)
-     __THROW;
-
-/* Return in *SCOPE the scheduling contention scope of *ATTR.  */
-extern int pthread_attr_getscope (__const pthread_attr_t *__restrict __attr,
-				  int *__restrict __scope) __THROW;
-
-#ifdef __USE_UNIX98
-/* Set the size of the guard area at the bottom of the thread.  */
-extern int pthread_attr_setguardsize (pthread_attr_t *__attr,
-				      size_t __guardsize) __THROW;
-
-/* Get the size of the guard area at the bottom of the thread.  */
-extern int pthread_attr_getguardsize (__const pthread_attr_t *__restrict
-				      __attr, size_t *__restrict __guardsize)
-     __THROW;
-#endif
-
-/* Set the starting address of the stack of the thread to be created.
-   Depending on whether the stack grows up or down the value must either
-   be higher or lower than all the address in the memory block.  The
-   minimal size of the block must be PTHREAD_STACK_SIZE.  */
-extern int pthread_attr_setstackaddr (pthread_attr_t *__attr,
-				      void *__stackaddr) __THROW;
-
-/* Return the previously set address for the stack.  */
-extern int pthread_attr_getstackaddr (__const pthread_attr_t *__restrict
-				      __attr, void **__restrict __stackaddr)
-     __THROW;
-
-#ifdef __USE_XOPEN2K
-/* The following two interfaces are intended to replace the last two.  They
-   require setting the address as well as the size since only setting the
-   address will make the implementation on some architectures impossible.  */
-extern int pthread_attr_setstack (pthread_attr_t *__attr, void *__stackaddr,
-				  size_t __stacksize) __THROW;
-
-/* Return the previously set address for the stack.  */
-extern int pthread_attr_getstack (__const pthread_attr_t *__restrict __attr,
-				  void **__restrict __stackaddr,
-				  size_t *__restrict __stacksize) __THROW;
-#endif
-
-/* Add information about the minimum stack size needed for the thread
-   to be started.  This size must never be less than PTHREAD_STACK_SIZE
-   and must also not exceed the system limits.  */
-extern int pthread_attr_setstacksize (pthread_attr_t *__attr,
-				      size_t __stacksize) __THROW;
-
-/* Return the currently used minimal stack size.  */
-extern int pthread_attr_getstacksize (__const pthread_attr_t *__restrict
-				      __attr, size_t *__restrict __stacksize)
-     __THROW;
-
-#ifdef __USE_GNU
-/* Get thread attributes corresponding to the already running thread TH.  */
-extern int pthread_getattr_np (pthread_t __th, pthread_attr_t *__attr) __THROW;
-#endif
-
-/* Functions for scheduling control.  */
-
-/* Set the scheduling parameters for TARGET_THREAD according to POLICY
-   and *PARAM.  */
-extern int pthread_setschedparam (pthread_t __target_thread, int __policy,
-				  __const struct sched_param *__param)
-     __THROW;
-
-/* Return in *POLICY and *PARAM the scheduling parameters for TARGET_THREAD.  */
-extern int pthread_getschedparam (pthread_t __target_thread,
-				  int *__restrict __policy,
-				  struct sched_param *__restrict __param)
-     __THROW;
-
-#ifdef __USE_UNIX98
-/* Determine level of concurrency.  */
-extern int pthread_getconcurrency (void) __THROW;
-
-/* Set new concurrency level to LEVEL.  */
-extern int pthread_setconcurrency (int __level) __THROW;
-#endif
-
-#ifdef __USE_GNU
-/* Yield the processor to another thread or process.
-   This function is similar to the POSIX `sched_yield' function but
-   might be differently implemented in the case of a m-on-n thread
-   implementation.  */
-extern int pthread_yield (void) __THROW;
-#endif
-
-/* Functions for mutex handling.  */
-
-/* Initialize MUTEX using attributes in *MUTEX_ATTR, or use the
-   default values if later is NULL.  */
-extern int pthread_mutex_init (pthread_mutex_t *__restrict __mutex,
-			       __const pthread_mutexattr_t *__restrict
-			       __mutex_attr) __THROW;
-
-/* Destroy MUTEX.  */
-extern int pthread_mutex_destroy (pthread_mutex_t *__mutex) __THROW;
-
-/* Try to lock MUTEX.  */
-extern int pthread_mutex_trylock (pthread_mutex_t *__mutex) __THROW;
-
-/* Wait until lock for MUTEX becomes available and lock it.  */
-extern int pthread_mutex_lock (pthread_mutex_t *__mutex) __THROW;
-
-#ifdef __USE_XOPEN2K
-/* Wait until lock becomes available, or specified time passes. */
-extern int pthread_mutex_timedlock (pthread_mutex_t *__restrict __mutex,
-				    __const struct timespec *__restrict
-				    __abstime) __THROW;
-#endif
-
-/* Unlock MUTEX.  */
-extern int pthread_mutex_unlock (pthread_mutex_t *__mutex) __THROW;
-
-
-/* Functions for handling mutex attributes.  */
-
-/* Initialize mutex attribute object ATTR with default attributes
-   (kind is PTHREAD_MUTEX_TIMED_NP).  */
-extern int pthread_mutexattr_init (pthread_mutexattr_t *__attr) __THROW;
-
-/* Destroy mutex attribute object ATTR.  */
-extern int pthread_mutexattr_destroy (pthread_mutexattr_t *__attr) __THROW;
-
-/* Get the process-shared flag of the mutex attribute ATTR.  */
-extern int pthread_mutexattr_getpshared (__const pthread_mutexattr_t *
-					 __restrict __attr,
-					 int *__restrict __pshared) __THROW;
-
-/* Set the process-shared flag of the mutex attribute ATTR.  */
-extern int pthread_mutexattr_setpshared (pthread_mutexattr_t *__attr,
-					 int __pshared) __THROW;
-
-#ifdef __USE_UNIX98
-/* Set the mutex kind attribute in *ATTR to KIND (either PTHREAD_MUTEX_NORMAL,
-   PTHREAD_MUTEX_RECURSIVE, PTHREAD_MUTEX_ERRORCHECK, or
-   PTHREAD_MUTEX_DEFAULT).  */
-extern int pthread_mutexattr_settype (pthread_mutexattr_t *__attr, int __kind)
-     __THROW;
-
-/* Return in *KIND the mutex kind attribute in *ATTR.  */
-extern int pthread_mutexattr_gettype (__const pthread_mutexattr_t *__restrict
-				      __attr, int *__restrict __kind) __THROW;
-#endif
-
-
-/* Functions for handling conditional variables.  */
-
-/* Initialize condition variable COND using attributes ATTR, or use
-   the default values if later is NULL.  */
-extern int pthread_cond_init (pthread_cond_t *__restrict __cond,
-			      __const pthread_condattr_t *__restrict
-			      __cond_attr) __THROW;
-
-/* Destroy condition variable COND.  */
-extern int pthread_cond_destroy (pthread_cond_t *__cond) __THROW;
-
-/* Wake up one thread waiting for condition variable COND.  */
-extern int pthread_cond_signal (pthread_cond_t *__cond) __THROW;
-
-/* Wake up all threads waiting for condition variables COND.  */
-extern int pthread_cond_broadcast (pthread_cond_t *__cond) __THROW;
-
-/* Wait for condition variable COND to be signaled or broadcast.
-   MUTEX is assumed to be locked before.  */
-extern int pthread_cond_wait (pthread_cond_t *__restrict __cond,
-			      pthread_mutex_t *__restrict __mutex) __THROW;
-
-/* Wait for condition variable COND to be signaled or broadcast until
-   ABSTIME.  MUTEX is assumed to be locked before.  ABSTIME is an
-   absolute time specification; zero is the beginning of the epoch
-   (00:00:00 GMT, January 1, 1970).  */
-extern int pthread_cond_timedwait (pthread_cond_t *__restrict __cond,
-				   pthread_mutex_t *__restrict __mutex,
-				   __const struct timespec *__restrict
-				   __abstime) __THROW;
-
-/* Functions for handling condition variable attributes.  */
-
-/* Initialize condition variable attribute ATTR.  */
-extern int pthread_condattr_init (pthread_condattr_t *__attr) __THROW;
-
-/* Destroy condition variable attribute ATTR.  */
-extern int pthread_condattr_destroy (pthread_condattr_t *__attr) __THROW;
-
-/* Get the process-shared flag of the condition variable attribute ATTR.  */
-extern int pthread_condattr_getpshared (__const pthread_condattr_t *
-					__restrict __attr,
-					int *__restrict __pshared) __THROW;
-
-/* Set the process-shared flag of the condition variable attribute ATTR.  */
-extern int pthread_condattr_setpshared (pthread_condattr_t *__attr,
-					int __pshared) __THROW;
-
-
-#ifdef __USE_UNIX98
-/* Functions for handling read-write locks.  */
-
-/* Initialize read-write lock RWLOCK using attributes ATTR, or use
-   the default values if later is NULL.  */
-extern int pthread_rwlock_init (pthread_rwlock_t *__restrict __rwlock,
-				__const pthread_rwlockattr_t *__restrict
-				__attr) __THROW;
-
-/* Destroy read-write lock RWLOCK.  */
-extern int pthread_rwlock_destroy (pthread_rwlock_t *__rwlock) __THROW;
-
-/* Acquire read lock for RWLOCK.  */
-extern int pthread_rwlock_rdlock (pthread_rwlock_t *__rwlock) __THROW;
-
-/* Try to acquire read lock for RWLOCK.  */
-extern int pthread_rwlock_tryrdlock (pthread_rwlock_t *__rwlock) __THROW;
-
-#ifdef __USE_XOPEN2K
-/* Try to acquire read lock for RWLOCK or return after specfied time.  */
-extern int pthread_rwlock_timedrdlock (pthread_rwlock_t *__restrict __rwlock,
-				       __const struct timespec *__restrict
-				       __abstime) __THROW;
-#endif
-
-/* Acquire write lock for RWLOCK.  */
-extern int pthread_rwlock_wrlock (pthread_rwlock_t *__rwlock) __THROW;
-
-/* Try to acquire write lock for RWLOCK.  */
-extern int pthread_rwlock_trywrlock (pthread_rwlock_t *__rwlock) __THROW;
-
-#ifdef __USE_XOPEN2K
-/* Try to acquire write lock for RWLOCK or return after specfied time.  */
-extern int pthread_rwlock_timedwrlock (pthread_rwlock_t *__restrict __rwlock,
-				       __const struct timespec *__restrict
-				       __abstime) __THROW;
-#endif
-
-/* Unlock RWLOCK.  */
-extern int pthread_rwlock_unlock (pthread_rwlock_t *__rwlock) __THROW;
-
-
-/* Functions for handling read-write lock attributes.  */
-
-/* Initialize attribute object ATTR with default values.  */
-extern int pthread_rwlockattr_init (pthread_rwlockattr_t *__attr) __THROW;
-
-/* Destroy attribute object ATTR.  */
-extern int pthread_rwlockattr_destroy (pthread_rwlockattr_t *__attr) __THROW;
-
-/* Return current setting of process-shared attribute of ATTR in PSHARED.  */
-extern int pthread_rwlockattr_getpshared (__const pthread_rwlockattr_t *
-					  __restrict __attr,
-					  int *__restrict __pshared) __THROW;
-
-/* Set process-shared attribute of ATTR to PSHARED.  */
-extern int pthread_rwlockattr_setpshared (pthread_rwlockattr_t *__attr,
-					  int __pshared) __THROW;
-
-/* Return current setting of reader/writer preference.  */
-extern int pthread_rwlockattr_getkind_np (__const pthread_rwlockattr_t *__attr,
-					  int *__pref) __THROW;
-
-/* Set reader/write preference.  */
-extern int pthread_rwlockattr_setkind_np (pthread_rwlockattr_t *__attr,
-					  int __pref) __THROW;
-#endif
-
-#ifdef __USE_XOPEN2K
-/* The IEEE Std. 1003.1j-2000 introduces functions to implement
-   spinlocks.  */
-
-/* Initialize the spinlock LOCK.  If PSHARED is nonzero the spinlock can
-   be shared between different processes.  */
-extern int pthread_spin_init (pthread_spinlock_t *__lock, int __pshared)
-     __THROW;
-
-/* Destroy the spinlock LOCK.  */
-extern int pthread_spin_destroy (pthread_spinlock_t *__lock) __THROW;
-
-/* Wait until spinlock LOCK is retrieved.  */
-extern int pthread_spin_lock (pthread_spinlock_t *__lock) __THROW;
-
-/* Try to lock spinlock LOCK.  */
-extern int pthread_spin_trylock (pthread_spinlock_t *__lock) __THROW;
-
-/* Release spinlock LOCK.  */
-extern int pthread_spin_unlock (pthread_spinlock_t *__lock) __THROW;
-
-
-/* Barriers are a also a new feature in 1003.1j-2000. */
-
-extern int pthread_barrier_init (pthread_barrier_t *__restrict __barrier,
-				 __const pthread_barrierattr_t *__restrict
-				 __attr, unsigned int __count) __THROW;
-
-extern int pthread_barrier_destroy (pthread_barrier_t *__barrier) __THROW;
-
-extern int pthread_barrierattr_init (pthread_barrierattr_t *__attr) __THROW;
-
-extern int pthread_barrierattr_destroy (pthread_barrierattr_t *__attr) __THROW;
-
-extern int pthread_barrierattr_getpshared (__const pthread_barrierattr_t *
-					   __restrict __attr,
-					   int *__restrict __pshared) __THROW;
-
-extern int pthread_barrierattr_setpshared (pthread_barrierattr_t *__attr,
-					   int __pshared) __THROW;
-
-extern int pthread_barrier_wait (pthread_barrier_t *__barrier) __THROW;
-#endif
-
-
-/* Functions for handling thread-specific data.  */
-
-/* Create a key value identifying a location in the thread-specific
-   data area.  Each thread maintains a distinct thread-specific data
-   area.  DESTR_FUNCTION, if non-NULL, is called with the value
-   associated to that key when the key is destroyed.
-   DESTR_FUNCTION is not called if the value associated is NULL when
-   the key is destroyed.  */
-extern int pthread_key_create (pthread_key_t *__key,
-			       void (*__destr_function) (void *)) __THROW;
-
-/* Destroy KEY.  */
-extern int pthread_key_delete (pthread_key_t __key) __THROW;
-
-/* Store POINTER in the thread-specific data slot identified by KEY. */
-extern int pthread_setspecific (pthread_key_t __key,
-				__const void *__pointer) __THROW;
-
-/* Return current value of the thread-specific data slot identified by KEY.  */
-extern void *pthread_getspecific (pthread_key_t __key) __THROW;
-
-
-/* Functions for handling initialization.  */
-
-/* Guarantee that the initialization function INIT_ROUTINE will be called
-   only once, even if pthread_once is executed several times with the
-   same ONCE_CONTROL argument. ONCE_CONTROL must point to a static or
-   extern variable initialized to PTHREAD_ONCE_INIT.  */
-extern int pthread_once (pthread_once_t *__once_control,
-			 void (*__init_routine) (void)) __THROW;
-
-
-/* Functions for handling cancellation.  */
-
-/* Set cancelability state of current thread to STATE, returning old
-   state in *OLDSTATE if OLDSTATE is not NULL.  */
-extern int pthread_setcancelstate (int __state, int *__oldstate) __THROW;
-
-/* Set cancellation state of current thread to TYPE, returning the old
-   type in *OLDTYPE if OLDTYPE is not NULL.  */
-extern int pthread_setcanceltype (int __type, int *__oldtype) __THROW;
-
-/* Cancel THREAD immediately or at the next possibility.  */
-extern int pthread_cancel (pthread_t __thread1) __THROW;
-
-/* Test for pending cancellation for the current thread and terminate
-   the thread as per pthread_exit(PTHREAD_CANCELED) if it has been
-   cancelled.  */
-extern void pthread_testcancel (void) __THROW;
-
-
-/* Install a cleanup handler: ROUTINE will be called with arguments ARG
-   when the thread is cancelled or calls pthread_exit.  ROUTINE will also
-   be called with arguments ARG when the matching pthread_cleanup_pop
-   is executed with non-zero EXECUTE argument.
-   pthread_cleanup_push and pthread_cleanup_pop are macros and must always
-   be used in matching pairs at the same nesting level of braces. */
-
-#define pthread_cleanup_push(routine,arg) \
-  { struct _pthread_cleanup_buffer _buffer;				      \
-    _pthread_cleanup_push (&_buffer, (routine), (arg));
-
-extern void _pthread_cleanup_push (struct _pthread_cleanup_buffer *__buffer,
-				   void (*__routine) (void *),
-				   void *__arg) __THROW;
-
-/* Remove a cleanup handler installed by the matching pthread_cleanup_push.
-   If EXECUTE is non-zero, the handler function is called. */
-
-#define pthread_cleanup_pop(execute) \
-    _pthread_cleanup_pop (&_buffer, (execute)); }
-
-extern void _pthread_cleanup_pop (struct _pthread_cleanup_buffer *__buffer,
-				  int __execute) __THROW;
-
-/* Install a cleanup handler as pthread_cleanup_push does, but also
-   saves the current cancellation type and set it to deferred cancellation.  */
-
-#ifdef __USE_GNU
-# define pthread_cleanup_push_defer_np(routine,arg) \
-  { struct _pthread_cleanup_buffer _buffer;				      \
-    _pthread_cleanup_push_defer (&_buffer, (routine), (arg));
-
-extern void _pthread_cleanup_push_defer (struct _pthread_cleanup_buffer *__buffer,
-					 void (*__routine) (void *),
-					 void *__arg) __THROW;
-
-/* Remove a cleanup handler as pthread_cleanup_pop does, but also
-   restores the cancellation type that was in effect when the matching
-   pthread_cleanup_push_defer was called.  */
-
-# define pthread_cleanup_pop_restore_np(execute) \
-  _pthread_cleanup_pop_restore (&_buffer, (execute)); }
-
-extern void _pthread_cleanup_pop_restore (struct _pthread_cleanup_buffer *__buffer,
-					  int __execute) __THROW;
-#endif
-
-
-#ifdef __USE_XOPEN2K
-/* Get ID of CPU-time clock for thread THREAD_ID.  */
-extern int pthread_getcpuclockid (pthread_t __thread_id,
-				  clockid_t *__clock_id) __THROW;
-#endif
-
-
-/* Functions for handling signals.  */
-#include <bits/sigthread.h>
-
-
-/* Functions for handling process creation and process execution.  */
-
-/* Install handlers to be called when a new process is created with FORK.
-   The PREPARE handler is called in the parent process just before performing
-   FORK. The PARENT handler is called in the parent process just after FORK.
-   The CHILD handler is called in the child process.  Each of the three
-   handlers can be NULL, meaning that no handler needs to be called at that
-   point.
-   PTHREAD_ATFORK can be called several times, in which case the PREPARE
-   handlers are called in LIFO order (last added with PTHREAD_ATFORK,
-   first called before FORK), and the PARENT and CHILD handlers are called
-   in FIFO (first added, first called).  */
-
-extern int pthread_atfork (void (*__prepare) (void),
-			   void (*__parent) (void),
-			   void (*__child) (void)) __THROW;
-
-/* Terminate all threads in the program except the calling process.
-   Should be called just before invoking one of the exec*() functions.  */
-
-extern void pthread_kill_other_threads_np (void) __THROW;
-
-__END_DECLS
-
-#endif	/* pthread.h */
diff --git a/newlib/libc/sys/linux/include/regex.h b/newlib/libc/sys/linux/include/regex.h
deleted file mode 100644
index d71c0ceee..000000000
--- a/newlib/libc/sys/linux/include/regex.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*-
- * Copyright (c) 1992 Henry Spencer.
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer of the University of Toronto.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regex.h	8.2 (Berkeley) 1/3/94
- * $FreeBSD: src/include/regex.h,v 1.4 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef _REGEX_H_
-#define	_REGEX_H_
-
-#include <sys/cdefs.h>
-
-/* types */
-typedef off_t regoff_t;
-
-typedef struct {
-	int re_magic;
-	size_t re_nsub;		/* number of parenthesized subexpressions */
-	__const char *re_endp;	/* end pointer for REG_PEND */
-	struct re_guts *re_g;	/* none of your business :-) */
-} regex_t;
-
-typedef struct {
-	regoff_t rm_so;		/* start of match */
-	regoff_t rm_eo;		/* end of match */
-} regmatch_t;
-
-/* regcomp() flags */
-#define	REG_BASIC	0000
-#define	REG_EXTENDED	0001
-#define	REG_ICASE	0002
-#define	REG_NOSUB	0004
-#define	REG_NEWLINE	0010
-#define	REG_NOSPEC	0020
-#define	REG_PEND	0040
-#define	REG_DUMP	0200
-
-/* regerror() flags */
-#define	REG_NOMATCH	 1
-#define	REG_BADPAT	 2
-#define	REG_ECOLLATE	 3
-#define	REG_ECTYPE	 4
-#define	REG_EESCAPE	 5
-#define	REG_ESUBREG	 6
-#define	REG_EBRACK	 7
-#define	REG_EPAREN	 8
-#define	REG_EBRACE	 9
-#define	REG_BADBR	10
-#define	REG_ERANGE	11
-#define	REG_ESPACE	12
-#define	REG_BADRPT	13
-#define	REG_EMPTY	14
-#define	REG_ASSERT	15
-#define	REG_INVARG	16
-#define	REG_ATOI	255	/* convert name to number (!) */
-#define	REG_ITOA	0400	/* convert number to name (!) */
-
-/* regexec() flags */
-#define	REG_NOTBOL	00001
-#define	REG_NOTEOL	00002
-#define	REG_STARTEND	00004
-#define	REG_TRACE	00400	/* tracing of execution */
-#define	REG_LARGE	01000	/* force large representation */
-#define	REG_BACKR	02000	/* force use of backref code */
-
-__BEGIN_DECLS
-int	regcomp(regex_t *, const char *, int);
-size_t	regerror(int, const regex_t *, char *, size_t);
-int	regexec(const regex_t *, const char *, size_t, regmatch_t [], int);
-void	regfree(regex_t *);
-__END_DECLS
-
-#endif /* !_REGEX_H_ */
diff --git a/newlib/libc/sys/linux/include/resolv.h b/newlib/libc/sys/linux/include/resolv.h
deleted file mode 100644
index 1114f2d92..000000000
--- a/newlib/libc/sys/linux/include/resolv.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*-
- * Copyright (c) 1983, 1987, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- *	@(#)resolv.h	8.1 (Berkeley) 6/2/93
- *	From Id: resolv.h,v 8.12 1998/04/28 19:36:46 halley Exp $
- * $FreeBSD: src/include/resolv.h,v 1.21 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef _RESOLV_H_
-#define	_RESOLV_H_
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/cdefs.h>
-#include <sys/socket.h>
-#include <stdio.h>
-
-/*
- * Revision information.  This is the release date in YYYYMMDD format.
- * It can change every day so the right thing to do with it is use it
- * in preprocessor commands such as "#if (__RES > 19931104)".  Do not
- * compare for equality; rather, use it to determine whether your resolver
- * is new enough to contain a certain feature.
- */
-
-#define	__RES	19960801
-
-/*
- * Resolver configuration file.
- * Normally not present, but may contain the address of the
- * inital name server(s) to query and the domain search list.
- */
-
-#ifndef _PATH_RESCONF
-#define	_PATH_RESCONF        "/etc/resolv.conf"
-#endif
-
-/*
- * Global defines and variables for resolver stub.
- */
-#define	MAXNS			3	/* max # name servers we'll track */
-#define	MAXDFLSRCH		3	/* # default domain levels to try */
-#define	MAXDNSRCH		6	/* max # domains in search path */
-#define	LOCALDOMAINPARTS	2	/* min levels in name that is "local" */
-
-#define	RES_TIMEOUT		5	/* min. seconds between retries */
-#define	MAXRESOLVSORT		10	/* number of net to sort on */
-#define	RES_MAXNDOTS		15	/* should reflect bit field size */
-
-struct __res_state {
-	int	retrans;	 	/* retransmition time interval */
-	int	retry;			/* number of times to retransmit */
-	u_long	options;		/* option flags - see below. */
-	int	nscount;		/* number of name servers */
-	struct sockaddr_in
-		nsaddr_list[MAXNS];	/* address of name server */
-#define	nsaddr	nsaddr_list[0]		/* for backward compatibility */
-	u_short	id;			/* current message id */
-	char	*dnsrch[MAXDNSRCH+1];	/* components of domain to search */
-	char	defdname[256];		/* default domain (deprecated) */
-	u_long	pfcode;			/* RES_PRF_ flags - see below. */
-	unsigned ndots:4;		/* threshold for initial abs. query */
-	unsigned nsort:4;		/* number of elements in sort_list[] */
-	char	unused[3];
-	struct {
-		struct in_addr	addr;
-		u_int32_t	mask;
-	} sort_list[MAXRESOLVSORT];
-	char	pad[72];		/* on an i386 this means 512b total */
-};
-
-/* for INET6 */
-/*
- * replacement of __res_state, separated to keep binary compatibility.
- */
-struct __res_state_ext {
-	struct sockaddr_storage nsaddr_list[MAXNS];
-	struct {
-		int	af;		/* address family for addr, mask */
-		union {
-			struct	in_addr ina;
-			struct	in6_addr in6a;
-		} addr, mask;
-	} sort_list[MAXRESOLVSORT];
-};
-
-/*
- * Resolver options (keep these in synch with res_debug.c, please)
- */
-#define RES_INIT	0x00000001	/* address initialized */
-#define RES_DEBUG	0x00000002	/* print debug messages */
-#define RES_AAONLY	0x00000004	/* authoritative answers only (!IMPL)*/
-#define RES_USEVC	0x00000008	/* use virtual circuit */
-#define RES_PRIMARY	0x00000010	/* query primary server only (!IMPL) */
-#define RES_IGNTC	0x00000020	/* ignore truncation errors */
-#define RES_RECURSE	0x00000040	/* recursion desired */
-#define RES_DEFNAMES	0x00000080	/* use default domain name */
-#define RES_STAYOPEN	0x00000100	/* Keep TCP socket open */
-#define RES_DNSRCH	0x00000200	/* search up local domain tree */
-#define	RES_INSECURE1	0x00000400	/* type 1 security disabled */
-#define	RES_INSECURE2	0x00000800	/* type 2 security disabled */
-#define	RES_NOALIASES	0x00001000	/* shuts off HOSTALIASES feature */
-#define	RES_USE_INET6	0x00002000	/* use/map IPv6 in gethostbyname() */
-#define	RES_NOTLDQUERY	0x00004000	/* Don't query TLD names */
-/* KAME extensions: use higher bit to avoid conflict with ISC use */
-#define	RES_USE_EDNS0	0x40000000	/* use EDNS0 */
-
-#define RES_DEFAULT	(RES_RECURSE | RES_DEFNAMES | RES_DNSRCH)
-
-/*
- * Resolver "pfcode" values.  Used by dig.
- */
-#define	RES_PRF_STATS	0x00000001
-#define	RES_PRF_UPDATE	0x00000002
-#define	RES_PRF_CLASS   0x00000004
-#define	RES_PRF_CMD	0x00000008
-#define	RES_PRF_QUES	0x00000010
-#define	RES_PRF_ANS	0x00000020
-#define	RES_PRF_AUTH	0x00000040
-#define	RES_PRF_ADD	0x00000080
-#define	RES_PRF_HEAD1	0x00000100
-#define	RES_PRF_HEAD2	0x00000200
-#define	RES_PRF_TTLID	0x00000400
-#define	RES_PRF_HEADX	0x00000800
-#define	RES_PRF_QUERY	0x00001000
-#define	RES_PRF_REPLY	0x00002000
-#define	RES_PRF_INIT    0x00004000
-/*			0x00008000	*/
-
-typedef enum { res_goahead, res_nextns, res_modified, res_done, res_error }
-	res_sendhookact;
-
-typedef res_sendhookact (*res_send_qhook)(struct sockaddr_in * const *ns,
-					  const u_char **query,
-					  int *querylen,
-					  u_char *ans,
-					  int anssiz,
-					  int *resplen);
-
-typedef res_sendhookact (*res_send_rhook)(const struct sockaddr_in *ns,
-					  const u_char *query,
-					  int querylen,
-					  u_char *ans,
-					  int anssiz,
-					  int *resplen);
-
-struct res_sym {
-	int	number;		/* Identifying number, like T_MX */
-	char *	name;		/* Its symbolic name, like "MX" */
-	char *	humanname;	/* Its fun name, like "mail exchanger" */
-};
-
-extern struct __res_state _res;
-/* for INET6 */
-extern struct __res_state_ext _res_ext;
-
-extern const struct res_sym __p_class_syms[];
-extern const struct res_sym __p_type_syms[];
-
-/* Private routines shared between libc/net, named, nslookup and others. */
-#define	res_hnok	__res_hnok
-#define	res_ownok	__res_ownok
-#define	res_mailok	__res_mailok
-#define	res_dnok	__res_dnok
-#define	sym_ston	__sym_ston
-#define	sym_ntos	__sym_ntos
-#define	sym_ntop	__sym_ntop
-#define	b64_ntop	__b64_ntop
-#define	b64_pton	__b64_pton
-#define	loc_ntoa	__loc_ntoa
-#define	loc_aton	__loc_aton
-#define	fp_resstat	__fp_resstat
-#define	p_query		__p_query
-#define	dn_skipname	__dn_skipname
-#define	fp_resstat	__fp_resstat
-#define	fp_query	__fp_query
-#define	fp_nquery	__fp_nquery
-#define	hostalias	__hostalias
-#define	putlong		__putlong
-#define	putshort	__putshort
-#define	p_class		__p_class
-#define	p_time		__p_time
-#define	p_type		__p_type
-#define	p_query		__p_query
-#define	p_cdnname	__p_cdnname
-#define	p_section	__p_section
-#define	p_cdname	__p_cdname
-#define	p_fqnname	__p_fqnname
-#define	p_fqname	__p_fqname
-#define	p_option	__p_option
-#define	p_secstodate	__p_secstodate
-#define	dn_count_labels	__dn_count_labels
-#define	dn_comp		__dn_comp
-#define	dn_expand	__dn_expand
-#define	res_init	__res_init
-#define	res_randomid	__res_randomid
-#define	res_query	__res_query
-#define	res_search	__res_search
-#define	res_querydomain	__res_querydomain
-#define	res_mkquery	__res_mkquery
-#define	res_send	__res_send
-#define	res_isourserver	__res_isourserver
-#define	res_nameinquery	__res_nameinquery
-#define	res_queriesmatch __res_queriesmatch
-#define	res_close	__res_close
-#define	res_opt		__res_opt
-#define	res_mkupdate	__res_mkupdate
-#define	res_mkupdrec	__res_mkupdrec
-#define	res_freeupdrec	__res_freeupdrec
-
-__BEGIN_DECLS
-int		res_hnok(const char *);
-int		res_ownok(const char *);
-int		res_mailok(const char *);
-int		res_dnok(const char *);
-int		sym_ston(const struct res_sym *, const char *, int *);
-const char *	sym_ntos(const struct res_sym *, int, int *);
-const char *	sym_ntop(const struct res_sym *, int, int *);
-int		b64_ntop(u_char const *, size_t, char *, size_t);
-int		b64_pton(char const *, u_char *, size_t);
-int		loc_aton(const char *, u_char *);
-const char *	loc_ntoa(const u_char *, char *);
-int		dn_skipname(const u_char *, const u_char *);
-void		fp_resstat(struct __res_state *, FILE *);
-void		fp_query(const u_char *, FILE *);
-void		fp_nquery(const u_char *, int, FILE *);
-const char *	hostalias(const char *);
-void		putlong(u_int32_t, u_char *);
-void		putshort(u_int16_t, u_char *);
-const char *	p_class(int);
-const char *	p_time(u_int32_t);
-const char *	p_type(int);
-void		p_query(const u_char *);
-const u_char *	p_cdnname(const u_char *, const u_char *, int, FILE *);
-const u_char *	p_cdname(const u_char *, const u_char *, FILE *);
-const u_char *	p_fqnname(const u_char *, const u_char *,
-			  int, char *, int);
-const u_char *	p_fqname(const u_char *, const u_char *, FILE *);
-const char *	p_option(u_long);
-char *		p_secstodate(u_long);
-int		dn_count_labels(const char *);
-int		dn_comp(const char *, u_char *, int, u_char **, u_char **);
-int		dn_expand(const u_char *, const u_char *, const u_char *,
-			  char *, int);
-int		res_init(void);
-u_int		res_randomid(void);
-int		res_query(const char *, int, int, u_char *, int);
-int		res_search(const char *, int, int, u_char *, int);
-int		res_querydomain(const char *, const char *, int, int,
-				u_char *, int);
-int		res_mkquery(int, const char *, int, int, const u_char *,
-			    int, const u_char *, u_char *, int);
-int		res_send(const u_char *, int, u_char *, int);
-int		res_isourserver(const struct sockaddr_in *);
-int		res_nameinquery(const char *, int, int,
-				const u_char *, const u_char *);
-int		res_queriesmatch(const u_char *, const u_char *,
-				 const u_char *, const u_char *);
-void		res_close(void);
-int		res_opt(int, u_char *, int, int);
-const char *	p_section(int, int);
-/* XXX The following depend on the ns_updrec typedef in arpa/nameser.h */
-#ifdef _ARPA_NAMESER_H_
-int		res_update(ns_updrec *);
-int		res_mkupdate(ns_updrec *, u_char *, int);
-ns_updrec *	res_mkupdrec(int, const char *, u_int, u_int, u_long);
-void		res_freeupdrec(ns_updrec *);
-#endif
-__END_DECLS
-
-#endif /* !_RESOLV_H_ */
diff --git a/newlib/libc/sys/linux/include/rpc/Makefile b/newlib/libc/sys/linux/include/rpc/Makefile
deleted file mode 100644
index 43a762bfc..000000000
--- a/newlib/libc/sys/linux/include/rpc/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#	from: @(#)Makefile	2.3 88/08/11 4.0 RPCSRC
-#	$FreeBSD: src/include/rpc/Makefile,v 1.1 2001/03/19 12:49:46 alfred Exp $
-
-.SUFFIXES: .x
-
-RPCCOM = rpcgen -C
-
-HDRS=	rpcb_prot.h
-
-XFILES= rpcb_prot.x
-
-HFILES=	auth.h auth_unix.h clnt.h clnt_soc.h clnt_stat.h \
-	nettype.h pmap_clnt.h pmap_prot.h pmap_rmt.h raw.h \
-	rpc.h rpc_msg.h rpcb_clnt.h rpcent.h rpc_com.h \
-	svc.h svc_auth.h svc_soc.h svc_dg.h types.h xdr.h
-
-# Secure RPC
-HFILES+= auth_des.h des.h des_crypt.h
-
-# Kerberos
-HFILES+= auth_kerb.h
-
-CLEANFILES+= ${HDRS}
-
-all: ${HDRS}
-
-beforeinstall:
-	${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 \
-		${HFILES:S;^;${.CURDIR}/;} \
-		${XFILES:S;^;${.CURDIR}/;} \
-		${HDRS} \
-		${DESTDIR}/usr/include/rpc
-
-.x.h:
-	${RPCCOM} -h -DWANT_NFS3 ${.IMPSRC} -o ${.TARGET}
-
-.include <bsd.prog.mk>
diff --git a/newlib/libc/sys/linux/include/rpc/auth.h b/newlib/libc/sys/linux/include/rpc/auth.h
deleted file mode 100644
index 811814740..000000000
--- a/newlib/libc/sys/linux/include/rpc/auth.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*	$NetBSD: auth.h,v 1.15 2000/06/02 22:57:55 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)auth.h 1.17 88/02/08 SMI
- *	from: @(#)auth.h	2.3 88/08/07 4.0 RPCSRC
- *	from: @(#)auth.h	1.43 	98/02/02 SMI
- * $FreeBSD: src/include/rpc/auth.h,v 1.19 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * auth.h, Authentication interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The data structures are completely opaque to the client.  The client
- * is required to pass a AUTH * to routines that create rpc
- * "sessions".
- */
-
-#ifndef _RPC_AUTH_H
-#define _RPC_AUTH_H
-#include <rpc/xdr.h>
-#include <rpc/clnt_stat.h>
-#include <sys/cdefs.h>
-#include <sys/socket.h>
-
-#define MAX_AUTH_BYTES	400
-#define MAXNETNAMELEN	255	/* maximum length of network user's name */
-
-/*
- *  Client side authentication/security data
- */
-
-typedef struct sec_data {
-	u_int	secmod;		/* security mode number e.g. in nfssec.conf */
-	u_int	rpcflavor;	/* rpc flavors:AUTH_UNIX,AUTH_DES,RPCSEC_GSS */
-	int	flags;		/* AUTH_F_xxx flags */
-	caddr_t data;		/* opaque data per flavor */
-} sec_data_t;
-
-#ifdef _SYSCALL32_IMPL
-struct sec_data32 {
-	uint32_t secmod;	/* security mode number e.g. in nfssec.conf */
-	uint32_t rpcflavor;	/* rpc flavors:AUTH_UNIX,AUTH_DES,RPCSEC_GSS */
-	int32_t flags;		/* AUTH_F_xxx flags */
-	caddr32_t data;		/* opaque data per flavor */
-};
-#endif /* _SYSCALL32_IMPL */
-
-/*
- * AUTH_DES flavor specific data from sec_data opaque data field.
- * AUTH_KERB has the same structure.
- */
-typedef struct des_clnt_data {
-	struct netbuf	syncaddr;	/* time sync addr */
-	struct knetconfig *knconf;	/* knetconfig info that associated */
-					/* with the syncaddr. */
-	char		*netname;	/* server's netname */
-	int		netnamelen;	/* server's netname len */
-} dh_k4_clntdata_t;
-
-#ifdef _SYSCALL32_IMPL
-struct des_clnt_data32 {
-	struct netbuf32 syncaddr;	/* time sync addr */
-	caddr32_t knconf;		/* knetconfig info that associated */
-					/* with the syncaddr. */
-	caddr32_t netname;		/* server's netname */
-	int32_t netnamelen;		/* server's netname len */
-};
-#endif /* _SYSCALL32_IMPL */
-
-#ifdef KERBEROS
-/*
- * flavor specific data to hold the data for AUTH_DES/AUTH_KERB(v4)
- * in sec_data->data opaque field.
- */
-typedef struct krb4_svc_data {
-	int		window;		/* window option value */
-} krb4_svcdata_t;
- 
-typedef struct krb4_svc_data	des_svcdata_t;
-#endif /* KERBEROS */
-
-/*
- * authentication/security specific flags
- */
-#define AUTH_F_RPCTIMESYNC	0x001	/* use RPC to do time sync */
-#define AUTH_F_TRYNONE		0x002	/* allow fall back to AUTH_NONE */
-
-
-/*
- * Status returned from authentication check
- */
-enum auth_stat {
-	AUTH_OK=0,
-	/*
-	 * failed at remote end
-	 */
-	AUTH_BADCRED=1,			/* bogus credentials (seal broken) */
-	AUTH_REJECTEDCRED=2,		/* client should begin new session */
-	AUTH_BADVERF=3,			/* bogus verifier (seal broken) */
-	AUTH_REJECTEDVERF=4,		/* verifier expired or was replayed */
-	AUTH_TOOWEAK=5,			/* rejected due to security reasons */
-	/*
-	 * failed locally
-	*/
-	AUTH_INVALIDRESP=6,		/* bogus response verifier */
-	AUTH_FAILED=7			/* some unknown reason */
-#ifdef KERBEROS
-	/*
-	 * kerberos errors
-	 */
-	,
-	AUTH_KERB_GENERIC = 8,		/* kerberos generic error */
-	AUTH_TIMEEXPIRE = 9,		/* time of credential expired */
-	AUTH_TKT_FILE = 10,		/* something wrong with ticket file */
-	AUTH_DECODE = 11,			/* can't decode authenticator */
-	AUTH_NET_ADDR = 12		/* wrong net address in ticket */
-#endif /* KERBEROS */
-};
-
-union des_block {
-	struct {
-		uint32_t high;
-		uint32_t low;
-	} key;
-	char c[8];
-};
-typedef union des_block des_block;
-__BEGIN_DECLS
-extern bool_t xdr_des_block(XDR *, des_block *);
-__END_DECLS
-
-/*
- * Authentication info.  Opaque to client.
- */
-struct opaque_auth {
-	enum_t	oa_flavor;		/* flavor of auth */
-	caddr_t	oa_base;		/* address of more auth stuff */
-	u_int	oa_length;		/* not to exceed MAX_AUTH_BYTES */
-};
-
-
-/*
- * Auth handle, interface to client side authenticators.
- */
-typedef struct __auth {
-	struct	opaque_auth	ah_cred;
-	struct	opaque_auth	ah_verf;
-	union	des_block	ah_key;
-	struct auth_ops {
-		void	(*ah_nextverf) (struct __auth *);
-		/* nextverf & serialize */
-		int	(*ah_marshal) (struct __auth *, XDR *);
-		/* validate verifier */
-		int	(*ah_validate) (struct __auth *,
-			    struct opaque_auth *);
-		/* refresh credentials */
-		int	(*ah_refresh) (struct __auth *, void *);
-		/* destroy this structure */
-		void	(*ah_destroy) (struct __auth *);
-	} *ah_ops;
-	void *ah_private;
-} AUTH;
-
-
-/*
- * Authentication ops.
- * The ops and the auth handle provide the interface to the authenticators.
- *
- * AUTH	*auth;
- * XDR	*xdrs;
- * struct opaque_auth verf;
- */
-#define AUTH_NEXTVERF(auth)		\
-		((*((auth)->ah_ops->ah_nextverf))(auth))
-#define auth_nextverf(auth)		\
-		((*((auth)->ah_ops->ah_nextverf))(auth))
-
-#define AUTH_MARSHALL(auth, xdrs)	\
-		((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-#define auth_marshall(auth, xdrs)	\
-		((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-
-#define AUTH_VALIDATE(auth, verfp)	\
-		((*((auth)->ah_ops->ah_validate))((auth), verfp))
-#define auth_validate(auth, verfp)	\
-		((*((auth)->ah_ops->ah_validate))((auth), verfp))
-
-#define AUTH_REFRESH(auth, msg)		\
-		((*((auth)->ah_ops->ah_refresh))(auth, msg))
-#define auth_refresh(auth, msg)		\
-		((*((auth)->ah_ops->ah_refresh))(auth, msg))
-
-#define AUTH_DESTROY(auth)		\
-		((*((auth)->ah_ops->ah_destroy))(auth))
-#define auth_destroy(auth)		\
-		((*((auth)->ah_ops->ah_destroy))(auth))
-
-
-__BEGIN_DECLS
-extern struct opaque_auth _null_auth;
-__END_DECLS
-
-/*
- * These are the various implementations of client side authenticators.
- */
-
-/*
- * System style authentication
- * AUTH *authunix_create(machname, uid, gid, len, aup_gids)
- *	char *machname;
- *	int uid;
- *	int gid;
- *	int len;
- *	int *aup_gids;
- */
-__BEGIN_DECLS
-extern AUTH *authunix_create(char *, int, int, int,
-    int *);
-extern AUTH *authunix_create_default(void);	/* takes no parameters */
-extern AUTH *authnone_create(void);		/* takes no parameters */
-__END_DECLS
-/*
- * DES style authentication
- * AUTH *authsecdes_create(servername, window, timehost, ckey)
- * 	char *servername;		- network name of server
- *	u_int window;			- time to live
- * 	const char *timehost;			- optional hostname to sync with
- * 	des_block *ckey;		- optional conversation key to use
- */
-__BEGIN_DECLS
-extern AUTH *authdes_create (char *, u_int, struct sockaddr *, des_block *);
-extern AUTH *authdes_seccreate (const char *, const u_int, const  char *,
-    const  des_block *);
-__END_DECLS
-
-__BEGIN_DECLS
-extern bool_t xdr_opaque_auth		(XDR *, struct opaque_auth *);
-__END_DECLS
-
-#define authsys_create(c,i1,i2,i3,ip) authunix_create((c),(i1),(i2),(i3),(ip))
-#define authsys_create_default() authunix_create_default()
-
-/*
- * Netname manipulation routines.
- */
-__BEGIN_DECLS
-extern int getnetname(char *);
-extern int host2netname(char *, const char *, const char *);
-extern int user2netname(char *, const uid_t, const char *);
-extern int netname2user(char *, uid_t *, gid_t *, int *, gid_t *);
-extern int netname2host(char *, char *, const int);
-extern void passwd2des ( char *, char * );
-__END_DECLS
-
-/*
- *
- * These routines interface to the keyserv daemon
- *
- */
-__BEGIN_DECLS
-extern int key_decryptsession(const char *, des_block *);
-extern int key_encryptsession(const char *, des_block *);
-extern int key_gendes(des_block *);
-extern int key_setsecret(const char *);
-extern int key_secretkey_is_set(void);
-__END_DECLS
-
-/*
- * Publickey routines.
- */
-__BEGIN_DECLS
-extern int getpublickey (const char *, char *);
-extern int getpublicandprivatekey (char *, char *);
-extern int getsecretkey (char *, char *, char *);
-__END_DECLS
-
-#ifdef KERBEROS
-/*
- * Kerberos style authentication
- * AUTH *authkerb_seccreate(service, srv_inst, realm, window, timehost, status)
- *	const char *service;			- service name
- *	const char *srv_inst;			- server instance
- *	const char *realm;			- server realm
- *	const u_int window;			- time to live
- *	const char *timehost;			- optional hostname to sync with
- *	int *status;				- kerberos status returned
- */
-__BEGIN_DECLS
-extern AUTH	*authkerb_seccreate(const char *, const char *, const  char *,
-		    const u_int, const char *, int *);
-__END_DECLS
-
-/*
- * Map a kerberos credential into a unix cred.
- *
- *	authkerb_getucred(rqst, uid, gid, grouplen, groups)
- *	const struct svc_req *rqst;		- request pointer
- *	uid_t *uid;
- *	gid_t *gid;
- *	short *grouplen;
- *	int *groups;
- *
- */
-__BEGIN_DECLS
-extern int	authkerb_getucred(/* struct svc_req *, uid_t *, gid_t *,
-		    short *, int * */);
-__END_DECLS
-#endif /* KERBEROS */
-
-__BEGIN_DECLS
-struct svc_req;
-struct rpc_msg;
-enum auth_stat _svcauth_null (struct svc_req *, struct rpc_msg *);
-enum auth_stat _svcauth_short (struct svc_req *, struct rpc_msg *);
-enum auth_stat _svcauth_unix (struct svc_req *, struct rpc_msg *);
-__END_DECLS
-
-#define AUTH_NONE	0		/* no authentication */
-#define	AUTH_NULL	0		/* backward compatibility */
-#define	AUTH_SYS	1		/* unix style (uid, gids) */
-#define AUTH_UNIX	AUTH_SYS
-#define	AUTH_SHORT	2		/* short hand unix style */
-#define AUTH_DH		3		/* for Diffie-Hellman mechanism */
-#define AUTH_DES	AUTH_DH		/* for backward compatibility */
-#define AUTH_KERB	4		/* kerberos style */
-
-#endif /* !_RPC_AUTH_H */
diff --git a/newlib/libc/sys/linux/include/rpc/auth_des.h b/newlib/libc/sys/linux/include/rpc/auth_des.h
deleted file mode 100644
index 24ef5d344..000000000
--- a/newlib/libc/sys/linux/include/rpc/auth_des.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*	@(#)auth_des.h	2.2 88/07/29 4.0 RPCSRC; from 1.3 88/02/08 SMI */
-/*	$FreeBSD: src/include/rpc/auth_des.h,v 1.3 2002/03/23 17:24:55 imp Exp $ */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- * 
- *	from: @(#)auth_des.h 2.2 88/07/29 4.0 RPCSRC
- *	from: @(#)auth_des.h 1.14    94/04/25 SMI
- */
-
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * auth_des.h, Protocol for DES style authentication for RPC
- */
-
-#ifndef _AUTH_DES_
-#define _AUTH_DES_
-
-/*
- * There are two kinds of "names": fullnames and nicknames
- */
-enum authdes_namekind {
-	ADN_FULLNAME, 
-	ADN_NICKNAME
-};
-
-/*
- * A fullname contains the network name of the client, 
- * a conversation key and the window
- */
-struct authdes_fullname {
-	char *name;		/* network name of client, up to MAXNETNAMELEN */
-	des_block key;		/* conversation key */
-	u_long window;		/* associated window */
-};
-
-
-/*
- * A credential 
- */
-struct authdes_cred {
-	enum authdes_namekind adc_namekind;
-	struct authdes_fullname adc_fullname;
-	u_long adc_nickname;
-};
-
-
-
-/*
- * A des authentication verifier 
- */
-struct authdes_verf {
-	union {
-		struct timeval adv_ctime;	/* clear time */
-		des_block adv_xtime;		/* crypt time */
-	} adv_time_u;
-	u_long adv_int_u;
-};
-
-/*
- * des authentication verifier: client variety
- *
- * adv_timestamp is the current time.
- * adv_winverf is the credential window + 1.
- * Both are encrypted using the conversation key.
- */
-#define adv_timestamp	adv_time_u.adv_ctime
-#define adv_xtimestamp	adv_time_u.adv_xtime
-#define adv_winverf	adv_int_u
-
-/*
- * des authentication verifier: server variety
- *
- * adv_timeverf is the client's timestamp + client's window
- * adv_nickname is the server's nickname for the client.
- * adv_timeverf is encrypted using the conversation key.
- */
-#define adv_timeverf	adv_time_u.adv_ctime
-#define adv_xtimeverf	adv_time_u.adv_xtime
-#define adv_nickname	adv_int_u
-
-/*
- * Map a des credential into a unix cred.
- *
- */
-__BEGIN_DECLS
-extern int authdes_getucred( struct authdes_cred *, uid_t *, gid_t *, int *, gid_t * );
-__END_DECLS
-
-__BEGIN_DECLS
-extern bool_t	xdr_authdes_cred(XDR *, struct authdes_cred *);
-extern bool_t	xdr_authdes_verf(XDR *, struct authdes_verf *);
-extern int	rtime(dev_t, struct netbuf *, int, struct timeval *,
-		    struct timeval *);
-extern void	kgetnetname(char *);
-extern enum auth_stat _svcauth_des(struct svc_req *, struct rpc_msg *);
-__END_DECLS
-
-#endif /* ndef _AUTH_DES_ */
diff --git a/newlib/libc/sys/linux/include/rpc/auth_kerb.h b/newlib/libc/sys/linux/include/rpc/auth_kerb.h
deleted file mode 100644
index b686b7883..000000000
--- a/newlib/libc/sys/linux/include/rpc/auth_kerb.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*	$FreeBSD: src/include/rpc/auth_kerb.h,v 1.1 2001/03/19 12:49:46 alfred Exp $ */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * auth_kerb.h, Protocol for Kerberos style authentication for RPC
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-
-#ifndef	_RPC_AUTH_KERB_H
-#define	_RPC_AUTH_KERB_H
-
-#ifdef KERBEROS
-
-#pragma ident	"@(#)auth_kerb.h	1.10	94/04/25 SMI"
-
-#include <kerberos/krb.h>
-#include <sys/socket.h>
-#include <sys/t_kuser.h>
-#include <netinet/in.h>
-#include <rpc/svc.h>
-
-/*
- * There are two kinds of "names": fullnames and nicknames
- */
-enum authkerb_namekind {
-	AKN_FULLNAME,
-	AKN_NICKNAME
-};
-/*
- * A fullname contains the ticket and the window
- */
-struct authkerb_fullname {
-	KTEXT_ST ticket;
-	u_long window;		/* associated window */
-};
-
-/*
- *  cooked credential stored in rq_clntcred
- */
-struct authkerb_clnt_cred {
-	/* start of AUTH_DAT */
-	unsigned char k_flags;	/* Flags from ticket */
-	char    pname[ANAME_SZ]; /* Principal's name */
-	char    pinst[INST_SZ];	/* His Instance */
-	char    prealm[REALM_SZ]; /* His Realm */
-	unsigned long checksum;	/* Data checksum (opt) */
-	C_Block session;	/* Session Key */
-	int	life;		/* Life of ticket */
-	unsigned long time_sec;	/* Time ticket issued */
-	unsigned long address;	/* Address in ticket */
-	/* KTEXT_ST reply;	Auth reply (opt) */
-	/* end of AUTH_DAT */
-	unsigned long expiry;	/* time the ticket is expiring */
-	u_long nickname;	/* Nickname into cache */
-	u_long window;		/* associated window */
-};
-
-typedef struct authkerb_clnt_cred authkerb_clnt_cred;
-
-/*
- * A credential
- */
-struct authkerb_cred {
-	enum authkerb_namekind akc_namekind;
-	struct authkerb_fullname akc_fullname;
-	u_long akc_nickname;
-};
-
-/*
- * A kerb authentication verifier
- */
-struct authkerb_verf {
-	union {
-		struct timeval akv_ctime;	/* clear time */
-		des_block akv_xtime;		/* crypt time */
-	} akv_time_u;
-	u_long akv_int_u;
-};
-
-/*
- * des authentication verifier: client variety
- *
- * akv_timestamp is the current time.
- * akv_winverf is the credential window + 1.
- * Both are encrypted using the conversation key.
- */
-#ifndef akv_timestamp
-#define	akv_timestamp	akv_time_u.akv_ctime
-#define	akv_xtimestamp	akv_time_u.akv_xtime
-#define	akv_winverf	akv_int_u
-#endif
-/*
- * des authentication verifier: server variety
- *
- * akv_timeverf is the client's timestamp + client's window
- * akv_nickname is the server's nickname for the client.
- * akv_timeverf is encrypted using the conversation key.
- */
-#ifndef akv_timeverf
-#define	akv_timeverf	akv_time_u.akv_ctime
-#define	akv_xtimeverf	akv_time_u.akv_xtime
-#define	akv_nickname	akv_int_u
-#endif
-
-/*
- * Register the service name, instance and realm.
- */
-extern int	authkerb_create(char *, char *, char *, u_int,
-			struct netbuf *, int *, dev_t, int, AUTH **);
-extern bool_t	xdr_authkerb_cred(XDR *, struct authkerb_cred *);
-extern bool_t	xdr_authkerb_verf(XDR *, struct authkerb_verf *);
-extern int	svc_kerb_reg(SVCXPRT *, char *, char *, char *);
-extern enum auth_stat _svcauth_kerb(struct svc_req *, struct rpc_msg *);
-
-#endif KERBEROS
-#endif	/* !_RPC_AUTH_KERB_H */
diff --git a/newlib/libc/sys/linux/include/rpc/auth_unix.h b/newlib/libc/sys/linux/include/rpc/auth_unix.h
deleted file mode 100644
index 721a5c942..000000000
--- a/newlib/libc/sys/linux/include/rpc/auth_unix.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)auth_unix.h 1.8 88/02/08 SMI
- *	from: @(#)auth_unix.h	2.2 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/auth_unix.h,v 1.11 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * auth_unix.h, Protocol for UNIX style authentication parameters for RPC
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-/*
- * The system is very weak.  The client uses no encryption for  it
- * credentials and only sends null verifiers.  The server sends backs
- * null verifiers or optionally a verifier that suggests a new short hand
- * for the credentials.
- */
-
-#ifndef _RPC_AUTH_UNIX_H
-#define _RPC_AUTH_UNIX_H
-#include <sys/cdefs.h>
-
-/* The machine name is part of a credential; it may not exceed 255 bytes */
-#define MAX_MACHINE_NAME 255
-
-/* gids compose part of a credential; there may not be more than 16 of them */
-#define NGRPS 16
-
-/*
- * Unix style credentials.
- */
-struct authunix_parms {
-	u_long	 aup_time;
-	char	*aup_machname;
-	int	 aup_uid;
-	int	 aup_gid;
-	u_int	 aup_len;
-	int	*aup_gids;
-};
-
-#define authsys_parms authunix_parms
-
-__BEGIN_DECLS
-extern bool_t xdr_authunix_parms(XDR *, struct authunix_parms *);
-__END_DECLS
-
-/*
- * If a response verifier has flavor AUTH_SHORT,
- * then the body of the response verifier encapsulates the following structure;
- * again it is serialized in the obvious fashion.
- */
-struct short_hand_verf {
-	struct opaque_auth new_cred;
-};
-
-#endif /* !_RPC_AUTH_UNIX_H */
diff --git a/newlib/libc/sys/linux/include/rpc/clnt.h b/newlib/libc/sys/linux/include/rpc/clnt.h
deleted file mode 100644
index 9a23404c3..000000000
--- a/newlib/libc/sys/linux/include/rpc/clnt.h
+++ /dev/null
@@ -1,504 +0,0 @@
-/*	$NetBSD: clnt.h,v 1.14 2000/06/02 22:57:55 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)clnt.h 1.31 94/04/29 SMI
- *	from: @(#)clnt.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/clnt.h,v 1.17 2002/04/28 15:18:45 des Exp $
- */
-
-/*
- * clnt.h - Client side remote procedure call interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_CLNT_H_
-#define _RPC_CLNT_H_
-#include <rpc/clnt_stat.h>
-#include <sys/cdefs.h>
-#include <netconfig.h>
-#include <sys/un.h>
-
-/*
- * Well-known IPV6 RPC broadcast address.
- */
-#define RPCB_MULTICAST_ADDR "ff02::202"
-
-/*
- * the following errors are in general unrecoverable.  The caller
- * should give up rather than retry.
- */
-#define IS_UNRECOVERABLE_RPC(s) (((s) == RPC_AUTHERROR) || \
-	((s) == RPC_CANTENCODEARGS) || \
-	((s) == RPC_CANTDECODERES) || \
-	((s) == RPC_VERSMISMATCH) || \
-	((s) == RPC_PROCUNAVAIL) || \
-	((s) == RPC_PROGUNAVAIL) || \
-	((s) == RPC_PROGVERSMISMATCH) || \
-	((s) == RPC_CANTDECODEARGS))
-
-/*
- * Error info.
- */
-struct rpc_err {
-	enum clnt_stat re_status;
-	union {
-		int RE_errno;		/* related system error */
-		enum auth_stat RE_why;	/* why the auth error occurred */
-		struct {
-			rpcvers_t low;	/* lowest version supported */
-			rpcvers_t high;	/* highest version supported */
-		} RE_vers;
-		struct {		/* maybe meaningful if RPC_FAILED */
-			int32_t s1;
-			int32_t s2;
-		} RE_lb;		/* life boot & debugging only */
-	} ru;
-#define	re_errno	ru.RE_errno
-#define	re_why		ru.RE_why
-#define	re_vers		ru.RE_vers
-#define	re_lb		ru.RE_lb
-};
-
-
-/*
- * Client rpc handle.
- * Created by individual implementations
- * Client is responsible for initializing auth, see e.g. auth_none.c.
- */
-typedef struct __rpc_client {
-	AUTH	*cl_auth;			/* authenticator */
-	struct clnt_ops {
-		/* call remote procedure */
-		enum clnt_stat	(*cl_call)(struct __rpc_client *,
-				    rpcproc_t, xdrproc_t, void *, xdrproc_t,
-				        void *, struct timeval);
-		/* abort a call */
-		void		(*cl_abort)(struct __rpc_client *);
-		/* get specific error code */
-		void		(*cl_geterr)(struct __rpc_client *,
-					struct rpc_err *);
-		/* frees results */
-		bool_t		(*cl_freeres)(struct __rpc_client *,
-					xdrproc_t, void *);
-		/* destroy this structure */
-		void		(*cl_destroy)(struct __rpc_client *);
-		/* the ioctl() of rpc */
-		bool_t          (*cl_control)(struct __rpc_client *, u_int,
-				    void *);
-	} *cl_ops;
-	void 			*cl_private;	/* private stuff */
-	char			*cl_netid;	/* network token */
-	char			*cl_tp;		/* device name */
-} CLIENT;
-
-
-/*
- * Timers used for the pseudo-transport protocol when using datagrams
- */
-struct rpc_timers {
-	u_short		rt_srtt;	/* smoothed round-trip time */
-	u_short		rt_deviate;	/* estimated deviation */
-	u_long		rt_rtxcur;	/* current (backed-off) rto */
-};
-
-/*      
- * Feedback values used for possible congestion and rate control
- */
-#define FEEDBACK_REXMIT1	1	/* first retransmit */
-#define FEEDBACK_OK		2	/* no retransmits */    
-
-/* Used to set version of portmapper used in broadcast */
-  
-#define CLCR_SET_LOWVERS	3
-#define CLCR_GET_LOWVERS	4
- 
-#define RPCSMALLMSGSIZE 400	/* a more reasonable packet size */
-
-/*
- * client side rpc interface ops
- *
- * Parameter types are:
- *
- */
-
-/*
- * enum clnt_stat
- * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)
- * 	CLIENT *rh;
- *	rpcproc_t proc;
- *	xdrproc_t xargs;
- *	void *argsp;
- *	xdrproc_t xres;
- *	void *resp;
- *	struct timeval timeout;
- */
-#define	CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \
-	((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \
-		argsp, xres, resp, secs))
-#define	clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \
-	((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \
-		argsp, xres, resp, secs))
-
-/*
- * void
- * CLNT_ABORT(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_ABORT(rh)	((*(rh)->cl_ops->cl_abort)(rh))
-#define	clnt_abort(rh)	((*(rh)->cl_ops->cl_abort)(rh))
-
-/*
- * struct rpc_err
- * CLNT_GETERR(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_GETERR(rh,errp)	((*(rh)->cl_ops->cl_geterr)(rh, errp))
-#define	clnt_geterr(rh,errp)	((*(rh)->cl_ops->cl_geterr)(rh, errp))
-
-
-/*
- * bool_t
- * CLNT_FREERES(rh, xres, resp);
- * 	CLIENT *rh;
- *	xdrproc_t xres;
- *	void *resp;
- */
-#define	CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-#define	clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-
-/*
- * bool_t
- * CLNT_CONTROL(cl, request, info)
- *      CLIENT *cl;
- *      u_int request;
- *      char *info;
- */
-#define	CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-#define	clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-
-/*
- * control operations that apply to both udp and tcp transports
- */
-#define CLSET_TIMEOUT		1	/* set timeout (timeval) */
-#define CLGET_TIMEOUT		2	/* get timeout (timeval) */
-#define CLGET_SERVER_ADDR	3	/* get server's address (sockaddr) */
-#define CLGET_FD		6	/* get connections file descriptor */
-#define CLGET_SVC_ADDR		7	/* get server's address (netbuf) */
-#define CLSET_FD_CLOSE		8	/* close fd while clnt_destroy */
-#define CLSET_FD_NCLOSE		9	/* Do not close fd while clnt_destroy */
-#define CLGET_XID 		10	/* Get xid */
-#define CLSET_XID		11	/* Set xid */
-#define CLGET_VERS		12	/* Get version number */
-#define CLSET_VERS		13	/* Set version number */
-#define CLGET_PROG		14	/* Get program number */
-#define CLSET_PROG		15	/* Set program number */
-#define CLSET_SVC_ADDR		16	/* get server's address (netbuf) */
-#define CLSET_PUSH_TIMOD	17	/* push timod if not already present */
-#define CLSET_POP_TIMOD		18	/* pop timod */
-/*
- * Connectionless only control operations
- */
-#define CLSET_RETRY_TIMEOUT 4   /* set retry timeout (timeval) */
-#define CLGET_RETRY_TIMEOUT 5   /* get retry timeout (timeval) */
-#define CLSET_ASYNC		19
-#define CLSET_CONNECT		20	/* Use connect() for UDP. (int) */
-
-/*
- * void
- * CLNT_DESTROY(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_DESTROY(rh)	((*(rh)->cl_ops->cl_destroy)(rh))
-#define	clnt_destroy(rh)	((*(rh)->cl_ops->cl_destroy)(rh))
-
-
-/*
- * RPCTEST is a test program which is accessible on every rpc
- * transport/port.  It is used for testing, performance evaluation,
- * and network administration.
- */
-
-#define RPCTEST_PROGRAM		((rpcprog_t)1)
-#define RPCTEST_VERSION		((rpcvers_t)1)
-#define RPCTEST_NULL_PROC	((rpcproc_t)2)
-#define RPCTEST_NULL_BATCH_PROC	((rpcproc_t)3)
-
-/*
- * By convention, procedure 0 takes null arguments and returns them
- */
-
-#define NULLPROC ((rpcproc_t)0)
-
-/*
- * Below are the client handle creation routines for the various
- * implementations of client side rpc.  They can return NULL if a
- * creation failure occurs.
- */
-
-/*
- * Generic client creation routine. Supported protocols are those that
- * belong to the nettype namespace (/etc/netconfig).
- * CLIENT *
- * clnt_create(host, prog, vers, prot);
- *	const char *host; 	-- hostname
- *	const rpcprog_t prog;	-- program number
- *	const rpcvers_t vers;	-- version number
- *	const char *prot;	-- protocol
- */
-__BEGIN_DECLS
-extern CLIENT *clnt_create(const char *, const rpcprog_t, const rpcvers_t,
-			   const char *);
-/*
- *
- * 	const char *hostname;			-- hostname
- *	const rpcprog_t prog;			-- program number
- *	const rpcvers_t vers;			-- version number
- *	const char *nettype;			-- network type
- */
-
-/*
- * Generic client creation routine. Supported protocols are which belong
- * to the nettype name space.
- */
-extern CLIENT *clnt_create_vers(const char *, const rpcprog_t, rpcvers_t *,
-				const rpcvers_t, const rpcvers_t,
-				const char *);
-/*
- *	const char *host;		-- hostname
- *	const rpcprog_t prog;		-- program number
- *	rpcvers_t *vers_out;		-- servers highest available version
- *	const rpcvers_t vers_low;	-- low version number
- *	const rpcvers_t vers_high;	-- high version number
- *	const char *nettype;		-- network type
- */
-
-
-/*
- * Generic client creation routine. It takes a netconfig structure
- * instead of nettype
- */
-extern CLIENT *clnt_tp_create(const char *, const rpcprog_t,
-			      const rpcvers_t, const struct netconfig *);
-/*
- *	const char *hostname;			-- hostname
- *	const rpcprog_t prog;			-- program number
- *	const rpcvers_t vers;			-- version number
- *	const struct netconfig *netconf; 	-- network config structure
- */
-
-/*
- * Generic TLI create routine. Only provided for compatibility.
- */
-
-extern CLIENT *clnt_tli_create(const int, const struct netconfig *,
-			       const struct netbuf *, const rpcprog_t,
-			       const rpcvers_t, const u_int, const u_int);
-/*
- *	const register int fd;		-- fd
- *	const struct netconfig *nconf;	-- netconfig structure
- *	const struct netbuf *svcaddr;		-- servers address
- *	const u_long prog;			-- program number
- *	const u_long vers;			-- version number
- *	const u_int sendsz;			-- send size
- *	const u_int recvsz;			-- recv size
- */
-
-/*
- * Low level clnt create routine for connectionful transports, e.g. tcp.
- */
-extern CLIENT *clnt_vc_create(const int, const struct netbuf *,
-			      const rpcprog_t, const rpcvers_t,
-			      const u_int, const u_int);
-/*
- * Added for compatibility to old rpc 4.0. Obsoleted by clnt_vc_create().
- */
-extern CLIENT *clntunix_create(struct sockaddr_un *,
-			       u_long, u_long, int *, u_int, u_int);
-/*
- *	const int fd;				-- open file descriptor
- *	const struct netbuf *svcaddr;		-- servers address
- *	const rpcprog_t prog;			-- program number
- *	const rpcvers_t vers;			-- version number
- *	const u_int sendsz;			-- buffer recv size
- *	const u_int recvsz;			-- buffer send size
- */
-
-/*
- * Low level clnt create routine for connectionless transports, e.g. udp.
- */
-extern CLIENT *clnt_dg_create(const int, const struct netbuf *,
-			      const rpcprog_t, const rpcvers_t,
-			      const u_int, const u_int);
-/*
- *	const int fd;				-- open file descriptor
- *	const struct netbuf *svcaddr;		-- servers address
- *	const rpcprog_t program;		-- program number
- *	const rpcvers_t version;		-- version number
- *	const u_int sendsz;			-- buffer recv size
- *	const u_int recvsz;			-- buffer send size
- */
-
-/*
- * Memory based rpc (for speed check and testing)
- * CLIENT *
- * clnt_raw_create(prog, vers)
- *	u_long prog;
- *	u_long vers;
- */
-extern CLIENT *clnt_raw_create(rpcprog_t, rpcvers_t);
-
-__END_DECLS
-
-
-/*
- * Print why creation failed
- */
-__BEGIN_DECLS
-extern void clnt_pcreateerror(const char *);			/* stderr */
-extern char *clnt_spcreateerror(const char *);			/* string */
-__END_DECLS
-
-/*
- * Like clnt_perror(), but is more verbose in its output
- */
-__BEGIN_DECLS
-extern void clnt_perrno(enum clnt_stat);		/* stderr */
-extern char *clnt_sperrno(enum clnt_stat);		/* string */
-__END_DECLS
-
-/*
- * Print an English error message, given the client error code
- */
-__BEGIN_DECLS
-extern void clnt_perror(CLIENT *, const char *);	 	/* stderr */
-extern char *clnt_sperror(CLIENT *, const char *);		/* string */
-__END_DECLS
-
-
-/*
- * If a creation fails, the following allows the user to figure out why.
- */
-struct rpc_createerr {
-	enum clnt_stat cf_stat;
-	struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */
-};
-
-#ifdef _THREAD_SAFE
-__BEGIN_DECLS
-extern struct rpc_createerr	*__rpc_createerr(void);
-__END_DECLS
-#define rpc_createerr		(*(__rpc_createerr()))
-#else
-extern struct rpc_createerr rpc_createerr;
-#endif /* _THREAD_SAFE */
-
-/*
- * The simplified interface:
- * enum clnt_stat
- * rpc_call(host, prognum, versnum, procnum, inproc, in, outproc, out, nettype)
- *	const char *host;
- *	const rpcprog_t prognum;
- *	const rpcvers_t versnum;
- *	const rpcproc_t procnum;
- *	const xdrproc_t inproc, outproc;
- *	const char *in;
- *	char *out;
- *	const char *nettype;
- */
-__BEGIN_DECLS
-extern enum clnt_stat rpc_call(const char *, const rpcprog_t,
-			       const rpcvers_t, const rpcproc_t,
-			       const xdrproc_t, const char *,
-			       const xdrproc_t, char *, const char *);
-__END_DECLS
-
-/*
- * RPC broadcast interface
- * The call is broadcasted to all locally connected nets.
- *
- * extern enum clnt_stat
- * rpc_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp,
- *			eachresult, nettype)
- *	const rpcprog_t		prog;		-- program number
- *	const rpcvers_t		vers;		-- version number
- *	const rpcproc_t		proc;		-- procedure number
- *	const xdrproc_t	xargs;		-- xdr routine for args
- *	caddr_t		argsp;		-- pointer to args
- *	const xdrproc_t	xresults;	-- xdr routine for results
- *	caddr_t		resultsp;	-- pointer to results
- *	const resultproc_t	eachresult;	-- call with each result
- *	const char		*nettype;	-- Transport type
- *
- * For each valid response received, the procedure eachresult is called.
- * Its form is:
- *		done = eachresult(resp, raddr, nconf)
- *			bool_t done;
- *			caddr_t resp;
- *			struct netbuf *raddr;
- *			struct netconfig *nconf;
- * where resp points to the results of the call and raddr is the
- * address if the responder to the broadcast.  nconf is the transport
- * on which the response was received.
- *
- * extern enum clnt_stat
- * rpc_broadcast_exp(prog, vers, proc, xargs, argsp, xresults, resultsp,
- *			eachresult, inittime, waittime, nettype)
- *	const rpcprog_t		prog;		-- program number
- *	const rpcvers_t		vers;		-- version number
- *	const rpcproc_t		proc;		-- procedure number
- *	const xdrproc_t	xargs;		-- xdr routine for args
- *	caddr_t		argsp;		-- pointer to args
- *	const xdrproc_t	xresults;	-- xdr routine for results
- *	caddr_t		resultsp;	-- pointer to results
- *	const resultproc_t	eachresult;	-- call with each result
- *	const int 		inittime;	-- how long to wait initially
- *	const int 		waittime;	-- maximum time to wait
- *	const char		*nettype;	-- Transport type
- */
-
-typedef bool_t (*resultproc_t)(caddr_t, ...);
-
-__BEGIN_DECLS
-extern enum clnt_stat rpc_broadcast(const rpcprog_t, const rpcvers_t,
-				    const rpcproc_t, const xdrproc_t,
-				    caddr_t, const xdrproc_t, caddr_t,
-				    const resultproc_t, const char *);
-extern enum clnt_stat rpc_broadcast_exp(const rpcprog_t, const rpcvers_t,
-					const rpcproc_t, const xdrproc_t,
-					caddr_t, const xdrproc_t, caddr_t,
-					const resultproc_t, const int,
-					const int, const char *);
-__END_DECLS
-
-/* For backward compatibility */
-#include <rpc/clnt_soc.h>
-
-#endif /* !_RPC_CLNT_H_ */
diff --git a/newlib/libc/sys/linux/include/rpc/clnt_soc.h b/newlib/libc/sys/linux/include/rpc/clnt_soc.h
deleted file mode 100644
index 338d28fbd..000000000
--- a/newlib/libc/sys/linux/include/rpc/clnt_soc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*	$NetBSD: clnt_soc.h,v 1.1 2000/06/02 22:57:55 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/clnt_soc.h,v 1.2 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1984 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * clnt.h - Client side remote procedure call interface.
- */
-
-#ifndef _RPC_CLNT_SOC_H
-#define _RPC_CLNT_SOC_H
-
-/* derived from clnt_soc.h 1.3 88/12/17 SMI     */
-
-/*
- * All the following declarations are only for backward compatibility
- * with TS-RPC.
- */
-
-#include <sys/cdefs.h>
-
-#define UDPMSGSIZE      8800    /* rpc imposed limit on udp msg size */  
-
-/*
- * TCP based rpc
- * CLIENT *
- * clnttcp_create(raddr, prog, vers, sockp, sendsz, recvsz)
- *	struct sockaddr_in *raddr;
- *	u_long prog;
- *	u_long version;
- *	register int *sockp;
- *	u_int sendsz;
- *	u_int recvsz;
- */
-__BEGIN_DECLS
-extern CLIENT *clnttcp_create(struct sockaddr_in *, u_long, u_long, int *,
-			      u_int, u_int);
-__END_DECLS
-
-/*
- * Raw (memory) rpc.
- */
-__BEGIN_DECLS
-extern CLIENT *clntraw_create(u_long, u_long);
-__END_DECLS
-
-
-/*
- * UDP based rpc.
- * CLIENT *
- * clntudp_create(raddr, program, version, wait, sockp)
- *	struct sockaddr_in *raddr;
- *	u_long program;
- *	u_long version;
- *	struct timeval wait;
- *	int *sockp;
- *
- * Same as above, but you specify max packet sizes.
- * CLIENT *
- * clntudp_bufcreate(raddr, program, version, wait, sockp, sendsz, recvsz)
- *	struct sockaddr_in *raddr;
- *	u_long program;
- *	u_long version;
- *	struct timeval wait;
- *	int *sockp;
- *	u_int sendsz;
- *	u_int recvsz;
- */
-__BEGIN_DECLS
-extern CLIENT *clntudp_create(struct sockaddr_in *, u_long, u_long, 
-			      struct timeval, int *);
-extern CLIENT *clntudp_bufcreate(struct sockaddr_in *, u_long, u_long,
-				 struct timeval, int *, u_int, u_int);
-__END_DECLS
-
-#endif /* _RPC_CLNT_SOC_H */
diff --git a/newlib/libc/sys/linux/include/rpc/clnt_stat.h b/newlib/libc/sys/linux/include/rpc/clnt_stat.h
deleted file mode 100644
index 397bdbc59..000000000
--- a/newlib/libc/sys/linux/include/rpc/clnt_stat.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*	$FreeBSD: src/include/rpc/clnt_stat.h,v 1.2 2001/03/20 08:20:50 alfred Exp $ */
-/*
- * Copyright (c) 1986 - 1991, 1994, 1996, 1997 by Sun Microsystems, Inc.
- * All rights reserved.
- */
-
-/*
- * clnt_stat.h - Client side remote procedure call enum
- *
- */
-
-#ifndef	_RPC_CLNT_STAT_H
-#define	_RPC_CLNT_STAT_H
-
-/* #pragma ident	"@(#)clnt_stat.h	1.2	97/04/28 SMI" */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-enum clnt_stat {
-	RPC_SUCCESS = 0,			/* call succeeded */
-	/*
-	 * local errors
-	 */
-	RPC_CANTENCODEARGS = 1,		/* can't encode arguments */
-	RPC_CANTDECODERES = 2,		/* can't decode results */
-	RPC_CANTSEND = 3,			/* failure in sending call */
-	RPC_CANTRECV = 4,
-	/* failure in receiving result */
-	RPC_TIMEDOUT = 5,			/* call timed out */
-	RPC_INTR = 18,			/* call interrupted */
-	RPC_UDERROR = 23,			/* recv got uderr indication */
-	/*
-	 * remote errors
-	 */
-	RPC_VERSMISMATCH = 6,		/* rpc versions not compatible */
-	RPC_AUTHERROR = 7,		/* authentication error */
-	RPC_PROGUNAVAIL = 8,		/* program not available */
-	RPC_PROGVERSMISMATCH = 9,	/* program version mismatched */
-	RPC_PROCUNAVAIL = 10,		/* procedure unavailable */
-	RPC_CANTDECODEARGS = 11,		/* decode arguments error */
-	RPC_SYSTEMERROR = 12,		/* generic "other problem" */
-
-	/*
-	 * rpc_call & clnt_create errors
-	 */
-	RPC_UNKNOWNHOST = 13,		/* unknown host name */
-	RPC_UNKNOWNPROTO = 17,		/* unknown protocol */
-	RPC_UNKNOWNADDR = 19,		/* Remote address unknown */
-	RPC_NOBROADCAST = 21,		/* Broadcasting not supported */
-
-	/*
-	 * rpcbind errors
-	 */
-	RPC_RPCBFAILURE = 14,		/* the pmapper failed in its call */
-#define	RPC_PMAPFAILURE RPC_RPCBFAILURE
-	RPC_PROGNOTREGISTERED = 15,	/* remote program is not registered */
-	RPC_N2AXLATEFAILURE = 22,
-	/* Name to address translation failed */
-	/*
-	 * Misc error in the TLI library
-	 */
-	RPC_TLIERROR = 20,
-	/*
-	 * unspecified error
-	 */
-	RPC_FAILED = 16,
-	/*
-	 * asynchronous errors
-	 */
-	RPC_INPROGRESS = 24,
-	RPC_STALERACHANDLE = 25,
-	RPC_CANTCONNECT = 26,		/* couldn't make connection (cots) */
-	RPC_XPRTFAILED = 27,		/* received discon from remote (cots) */
-	RPC_CANTCREATESTREAM = 28	/* can't push rpc module (cots) */
-};
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif	/* !_RPC_CLNT_STAT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/des.h b/newlib/libc/sys/linux/include/rpc/des.h
deleted file mode 100644
index 385afde07..000000000
--- a/newlib/libc/sys/linux/include/rpc/des.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*  @(#)des.h	2.2 88/08/10 4.0 RPCSRC; from 2.7 88/02/08 SMI  */
-/* $FreeBSD: src/include/rpc/des.h,v 1.4 2002/03/23 17:24:55 imp Exp $ */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Generic DES driver interface
- * Keep this file hardware independent!
- * Copyright (c) 1986 by Sun Microsystems, Inc.
- */
-
-#define DES_MAXLEN 	65536	/* maximum # of bytes to encrypt  */
-#define DES_QUICKLEN	16	/* maximum # of bytes to encrypt quickly */
-
-enum desdir { ENCRYPT, DECRYPT };
-enum desmode { CBC, ECB };
-
-/*
- * parameters to ioctl call
- */
-struct desparams {
-	u_char des_key[8];	/* key (with low bit parity) */
-	enum desdir des_dir;	/* direction */
-	enum desmode des_mode;	/* mode */
-	u_char des_ivec[8];	/* input vector */
-	unsigned des_len;	/* number of bytes to crypt */
-	union {
-		u_char UDES_data[DES_QUICKLEN];
-		u_char *UDES_buf;
-	} UDES;
-#	define des_data UDES.UDES_data	/* direct data here if quick */
-#	define des_buf	UDES.UDES_buf	/* otherwise, pointer to data */
-};
-
-#ifdef notdef
-
-/*
- * These ioctls are only implemented in SunOS. Maybe someday
- * if somebody writes a driver for DES hardware that works
- * with FreeBSD, we can being that back.
- */
-
-/*
- * Encrypt an arbitrary sized buffer
- */
-#define	DESIOCBLOCK	_IOWR('d', 6, struct desparams)
-
-/* 
- * Encrypt of small amount of data, quickly
- */
-#define DESIOCQUICK	_IOWR('d', 7, struct desparams) 
-
-#endif
-
-/*
- * Software DES.
- */
-extern int _des_crypt( char *, int, struct desparams * );
diff --git a/newlib/libc/sys/linux/include/rpc/des_crypt.h b/newlib/libc/sys/linux/include/rpc/des_crypt.h
deleted file mode 100644
index eb166eded..000000000
--- a/newlib/libc/sys/linux/include/rpc/des_crypt.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * @(#)des_crypt.h	2.1 88/08/11 4.0 RPCSRC;	from 1.4 88/02/08 (C) 1986 SMI
- * $FreeBSD: src/include/rpc/des_crypt.h,v 1.4 2002/03/23 17:24:55 imp Exp $
- *
- * des_crypt.h, des library routine interface
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * des_crypt.h, des library routine interface
- */
-
-#ifndef _DES_DES_CRYPT_H
-#define _DES_DES_CRYPT_H
-
-#include <sys/cdefs.h>
-#include <rpc/rpc.h>
-
-#define DES_MAXDATA 8192	/* max bytes encrypted in one call */
-#define DES_DIRMASK (1 << 0)
-#define DES_ENCRYPT (0*DES_DIRMASK)	/* Encrypt */
-#define DES_DECRYPT (1*DES_DIRMASK)	/* Decrypt */
-
-
-#define DES_DEVMASK (1 << 1)
-#define	DES_HW (0*DES_DEVMASK)	/* Use hardware device */ 
-#define DES_SW (1*DES_DEVMASK)	/* Use software device */
-
-
-#define DESERR_NONE 0	/* succeeded */
-#define DESERR_NOHWDEVICE 1	/* succeeded, but hw device not available */
-#define DESERR_HWERROR 2	/* failed, hardware/driver error */
-#define DESERR_BADPARAM 3	/* failed, bad parameter to call */
-
-#define DES_FAILED(err) \
-	((err) > DESERR_NOHWDEVICE)
-
-/*
- * cbc_crypt()
- * ecb_crypt()
- *
- * Encrypt (or decrypt) len bytes of a buffer buf.
- * The length must be a multiple of eight.
- * The key should have odd parity in the low bit of each byte.
- * ivec is the input vector, and is updated to the new one (cbc only).
- * The mode is created by oring together the appropriate parameters.
- * DESERR_NOHWDEVICE is returned if DES_HW was specified but
- * there was no hardware to do it on (the data will still be
- * encrypted though, in software).
- */
-
-
-/*
- * Cipher Block Chaining mode
- */
-__BEGIN_DECLS
-int cbc_crypt( char *, char *, unsigned int, unsigned int, char *);
-__END_DECLS
-
-/*
- * Electronic Code Book mode
- */
-__BEGIN_DECLS
-int ecb_crypt( char *, char *, unsigned int, unsigned int );
-__END_DECLS
-
-/* 
- * Set des parity for a key.
- * DES parity is odd and in the low bit of each byte
- */
-__BEGIN_DECLS
-void des_setparity( char *);
-__END_DECLS
-
-#endif  /* _DES_DES_CRYPT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/nettype.h b/newlib/libc/sys/linux/include/rpc/nettype.h
deleted file mode 100644
index b18dc49fe..000000000
--- a/newlib/libc/sys/linux/include/rpc/nettype.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*	$NetBSD: nettype.h,v 1.2 2000/07/06 03:17:19 christos Exp $	*/
-/*	$FreeBSD: src/include/rpc/nettype.h,v 1.2 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * nettype.h, Nettype definitions.
- * All for the topmost layer of rpc
- *
- */
-
-#ifndef	_RPC_NETTYPE_H
-#define	_RPC_NETTYPE_H
-
-#include <netconfig.h>
-
-#define	_RPC_NONE	0
-#define	_RPC_NETPATH	1
-#define	_RPC_VISIBLE	2
-#define	_RPC_CIRCUIT_V	3
-#define	_RPC_DATAGRAM_V	4
-#define	_RPC_CIRCUIT_N	5
-#define	_RPC_DATAGRAM_N	6
-#define	_RPC_TCP	7
-#define	_RPC_UDP	8
-
-__BEGIN_DECLS
-extern void *__rpc_setconf(const char *);
-extern void __rpc_endconf(void *);
-extern struct netconfig *__rpc_getconf(void *);
-extern struct netconfig *__rpc_getconfip(const char *);
-__END_DECLS
-
-#endif	/* !_RPC_NETTYPE_H */
diff --git a/newlib/libc/sys/linux/include/rpc/pmap_clnt.h b/newlib/libc/sys/linux/include/rpc/pmap_clnt.h
deleted file mode 100644
index e6333c7c7..000000000
--- a/newlib/libc/sys/linux/include/rpc/pmap_clnt.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*	$NetBSD: pmap_clnt.h,v 1.9 2000/06/02 22:57:55 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)pmap_clnt.h 1.11 88/02/08 SMI 
- *	from: @(#)pmap_clnt.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/pmap_clnt.h,v 1.14 2002/04/28 15:18:45 des Exp $
- */
-
-/*
- * pmap_clnt.h
- * Supplies C routines to get to portmap services.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-/*
- * Usage:
- *	success = pmap_set(program, version, protocol, port);
- *	success = pmap_unset(program, version);
- *	port = pmap_getport(address, program, version, protocol);
- *	head = pmap_getmaps(address);
- *	clnt_stat = pmap_rmtcall(address, program, version, procedure,
- *		xdrargs, argsp, xdrres, resp, tout, port_ptr)
- *		(works for udp only.)
- * 	clnt_stat = clnt_broadcast(program, version, procedure,
- *		xdrargs, argsp,	xdrres, resp, eachresult)
- *		(like pmap_rmtcall, except the call is broadcasted to all
- *		locally connected nets.  For each valid response received,
- *		the procedure eachresult is called.  Its form is:
- *	done = eachresult(resp, raddr)
- *		bool_t done;
- *		caddr_t resp;
- *		struct sockaddr_in raddr;
- *		where resp points to the results of the call and raddr is the
- *		address if the responder to the broadcast.
- */
-
-#ifndef _RPC_PMAP_CLNT_H_
-#define _RPC_PMAP_CLNT_H_
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-extern bool_t		pmap_set(u_long, u_long, int, int);
-extern bool_t		pmap_unset(u_long, u_long);
-extern struct pmaplist	*pmap_getmaps(struct sockaddr_in *);
-extern enum clnt_stat	pmap_rmtcall(struct sockaddr_in *,
-				     u_long, u_long, u_long,
-				     xdrproc_t, caddr_t,
-				     xdrproc_t, caddr_t,
-				     struct timeval, u_long *);
-extern enum clnt_stat	clnt_broadcast(u_long, u_long, u_long,
-				       xdrproc_t, void *,
-				       xdrproc_t, void *,
-				       resultproc_t);
-extern u_short		pmap_getport(struct sockaddr_in *,
-				     u_long, u_long, u_int);
-__END_DECLS
-
-#endif /* !_RPC_PMAP_CLNT_H_ */
diff --git a/newlib/libc/sys/linux/include/rpc/pmap_prot.h b/newlib/libc/sys/linux/include/rpc/pmap_prot.h
deleted file mode 100644
index d83049943..000000000
--- a/newlib/libc/sys/linux/include/rpc/pmap_prot.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*	$NetBSD: pmap_prot.h,v 1.8 2000/06/02 22:57:55 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)pmap_prot.h 1.14 88/02/08 SMI 
- *	from: @(#)pmap_prot.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/pmap_prot.h,v 1.12 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * pmap_prot.h
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The following procedures are supported by the protocol:
- *
- * PMAPPROC_NULL() returns ()
- * 	takes nothing, returns nothing
- *
- * PMAPPROC_SET(struct pmap) returns (bool_t)
- * 	TRUE is success, FALSE is failure.  Registers the tuple
- *	[prog, vers, prot, port].
- *
- * PMAPPROC_UNSET(struct pmap) returns (bool_t)
- *	TRUE is success, FALSE is failure.  Un-registers pair
- *	[prog, vers].  prot and port are ignored.
- *
- * PMAPPROC_GETPORT(struct pmap) returns (long unsigned).
- *	0 is failure.  Otherwise returns the port number where the pair
- *	[prog, vers] is registered.  It may lie!
- *
- * PMAPPROC_DUMP() RETURNS (struct pmaplist *)
- *
- * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>)
- * 	RETURNS (port, string<>);
- * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, encapsulatedargs);
- * 	Calls the procedure on the local machine.  If it is not registered,
- *	this procedure is quite; ie it does not return error information!!!
- *	This procedure only is supported on rpc/udp and calls via
- *	rpc/udp.  This routine only passes null authentication parameters.
- *	This file has no interface to xdr routines for PMAPPROC_CALLIT.
- *
- * The service supports remote procedure calls on udp/ip or tcp/ip socket 111.
- */
-
-#ifndef _RPC_PMAP_PROT_H
-#define _RPC_PMAP_PROT_H
-#include <sys/cdefs.h>
-
-#define PMAPPORT		((u_short)111)
-#define PMAPPROG		((u_long)100000)
-#define PMAPVERS		((u_long)2)
-#define PMAPVERS_PROTO		((u_long)2)
-#define PMAPVERS_ORIG		((u_long)1)
-#define PMAPPROC_NULL		((u_long)0)
-#define PMAPPROC_SET		((u_long)1)
-#define PMAPPROC_UNSET		((u_long)2)
-#define PMAPPROC_GETPORT	((u_long)3)
-#define PMAPPROC_DUMP		((u_long)4)
-#define PMAPPROC_CALLIT		((u_long)5)
-
-struct pmap {
-	long unsigned pm_prog;
-	long unsigned pm_vers;
-	long unsigned pm_prot;
-	long unsigned pm_port;
-};
-
-struct pmaplist {
-	struct pmap	pml_map;
-	struct pmaplist *pml_next;
-};
-
-__BEGIN_DECLS
-extern bool_t xdr_pmap(XDR *, struct pmap *);
-extern bool_t xdr_pmaplist(XDR *, struct pmaplist **);
-extern bool_t xdr_pmaplist_ptr(XDR *, struct pmaplist *);
-__END_DECLS
-
-#endif /* !_RPC_PMAP_PROT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/pmap_rmt.h b/newlib/libc/sys/linux/include/rpc/pmap_rmt.h
deleted file mode 100644
index 3e069e785..000000000
--- a/newlib/libc/sys/linux/include/rpc/pmap_rmt.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*	$NetBSD: pmap_rmt.h,v 1.7 1998/02/11 23:01:23 lukem Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)pmap_rmt.h 1.2 88/02/08 SMI
- *	from: @(#)pmap_rmt.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/pmap_rmt.h,v 1.12 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * Structures and XDR routines for parameters to and replies from
- * the portmapper remote-call-service.
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_RMT_H
-#define _RPC_PMAP_RMT_H
-#include <sys/cdefs.h>
-
-struct rmtcallargs {
-	u_long prog, vers, proc, arglen;
-	caddr_t args_ptr;
-	xdrproc_t xdr_args;
-};
-
-struct rmtcallres {
-	u_long *port_ptr;
-	u_long resultslen;
-	caddr_t results_ptr;
-	xdrproc_t xdr_results;
-};
-
-__BEGIN_DECLS
-extern bool_t xdr_rmtcall_args(XDR *, struct rmtcallargs *);
-extern bool_t xdr_rmtcallres(XDR *, struct rmtcallres *);
-__END_DECLS
-
-#endif /* !_RPC_PMAP_RMT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/raw.h b/newlib/libc/sys/linux/include/rpc/raw.h
deleted file mode 100644
index d418bf41e..000000000
--- a/newlib/libc/sys/linux/include/rpc/raw.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*	$NetBSD: raw.h,v 1.1 2000/06/02 22:57:56 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/raw.h,v 1.1 2001/03/19 12:49:47 alfred Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_RAW_H
-#define	_RPC_RAW_H
-
-/* 	from: @(#)raw.h	1.11	94/04/25 SMI */
-/*	from: @(#)raw.h 1.2 88/10/25 SMI	*/
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/*
- * raw.h
- *
- * Raw interface
- * The common memory area over which they will communicate
- */
-extern char *__rpc_rawcombuf;
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif	/* _RPC_RAW_H */
diff --git a/newlib/libc/sys/linux/include/rpc/rpc.h b/newlib/libc/sys/linux/include/rpc/rpc.h
deleted file mode 100644
index 72a717c05..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpc.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*	$NetBSD: rpc.h,v 1.13 2000/06/02 22:57:56 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)rpc.h 1.9 88/02/08 SMI
- *	from: @(#)rpc.h	2.4 89/07/11 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/rpc.h,v 1.17 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * rpc.h, Just includes the billions of rpc header files necessary to
- * do remote procedure calling.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-#ifndef _RPC_RPC_H
-#define _RPC_RPC_H
-
-#include <rpc/types.h>		/* some typedefs */
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-/* external data representation interfaces */
-#include <rpc/xdr.h>		/* generic (de)serializer */
-
-/* Client side only authentication */
-#include <rpc/auth.h>		/* generic authenticator (client side) */
-
-/* Client side (mostly) remote procedure call */
-#include <rpc/clnt.h>		/* generic rpc stuff */
-
-/* semi-private protocol headers */
-#include <rpc/rpc_msg.h>	/* protocol for rpc messages */
-#include <rpc/auth_unix.h>	/* protocol for unix style cred */
-/*
- *  Uncomment-out the next line if you are building the rpc library with
- *  DES Authentication (see the README file in the secure_rpc/ directory).
- */
-#include <rpc/auth_des.h>	/* protocol for des style cred */
-
-/* Server side only remote procedure callee */
-#include <rpc/svc.h>		/* service manager and multiplexer */
-#include <rpc/svc_auth.h>	/* service side authenticator */
-
-/* Portmapper client, server, and protocol headers */
-#include <rpc/pmap_clnt.h>
-#include <rpc/pmap_prot.h>
-
-#ifndef _KERNEL
-#include <rpc/rpcb_clnt.h>	/* rpcbind interface functions */
-#endif
-
-#include <rpc/rpcent.h>
-
-__BEGIN_DECLS
-extern int get_myaddress(struct sockaddr_in *);
-extern int bindresvport(int, struct sockaddr_in *);
-extern int registerrpc(int, int, int, char *(*)(char [UDPMSGSIZE]),
-    xdrproc_t, xdrproc_t);
-extern int callrpc(const char *, int, int, int, xdrproc_t, void *,
-    xdrproc_t , void *);
-extern int getrpcport(char *, int, int, int);
-
-char *taddr2uaddr(const struct netconfig *, const struct netbuf *);
-struct netbuf *uaddr2taddr(const struct netconfig *, const char *);
-
-struct sockaddr;
-extern int bindresvport_sa(int, struct sockaddr *);
-__END_DECLS
-
-/*
- * The following are not exported interfaces, they are for internal library
- * and rpcbind use only. Do not use, they may change without notice.
- */
-__BEGIN_DECLS
-int __rpc_nconf2fd(const struct netconfig *);
-int __rpc_nconf2sockinfo(const struct netconfig *, struct __rpc_sockinfo *);
-int __rpc_fd2sockinfo(int, struct __rpc_sockinfo *);
-u_int __rpc_get_t_size(int, int, int);
-__END_DECLS
-
-#endif /* !_RPC_RPC_H */
diff --git a/newlib/libc/sys/linux/include/rpc/rpc_com.h b/newlib/libc/sys/linux/include/rpc/rpc_com.h
deleted file mode 100644
index 8c6a26e3e..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpc_com.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*	$NetBSD: rpc_com.h,v 1.3 2000/12/10 04:10:08 christos Exp $	*/
-/*	$FreeBSD: src/include/rpc/rpc_com.h,v 1.5 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * rpc_com.h, Common definitions for both the server and client side.
- * All for the topmost layer of rpc
- *
- */
-
-#ifndef _RPC_RPCCOM_H
-#define	_RPC_RPCCOM_H
-
-#include <sys/cdefs.h>
-
-/* #pragma ident	"@(#)rpc_com.h	1.11	93/07/05 SMI" */
-
-/*
- * The max size of the transport, if the size cannot be determined
- * by other means.
- */
-#define	RPC_MAXDATASIZE 9000
-#define	RPC_MAXADDRSIZE 1024
-
-#define __RPC_GETXID(now) ((u_int32_t)getpid() ^ (u_int32_t)(now)->tv_sec ^ \
-    (u_int32_t)(now)->tv_usec)
-
-__BEGIN_DECLS
-extern u_int __rpc_get_a_size(int);
-extern int __rpc_dtbsize(void);
-extern int _rpc_dtablesize(void);
-extern struct netconfig * __rpcgettp(int);
-extern  int  __rpc_get_default_domain(char **);
-
-char *__rpc_taddr2uaddr_af(int, const struct netbuf *);
-struct netbuf *__rpc_uaddr2taddr_af(int, const char *);
-int __rpc_fixup_addr(struct netbuf *, const struct netbuf *);
-int __rpc_sockinfo2netid(struct __rpc_sockinfo *, const char **);
-int __rpc_seman2socktype(int);
-int __rpc_socktype2seman(int);
-void *rpc_nullproc(CLIENT *);
-int __rpc_sockisbound(int);
-
-struct netbuf *__rpcb_findaddr(rpcprog_t, rpcvers_t, const struct netconfig *,
-			       const char *, CLIENT **);
-bool_t __rpc_control(int,void *);
-
-char *_get_next_token(char *, int);
-
-__END_DECLS
-
-#endif /* _RPC_RPCCOM_H */
diff --git a/newlib/libc/sys/linux/include/rpc/rpc_msg.h b/newlib/libc/sys/linux/include/rpc/rpc_msg.h
deleted file mode 100644
index 6cb229c21..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpc_msg.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*	$NetBSD: rpc_msg.h,v 1.11 2000/06/02 22:57:56 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)rpc_msg.h 1.7 86/07/16 SMI
- *	from: @(#)rpc_msg.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/rpc_msg.h,v 1.14 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * rpc_msg.h
- * rpc message definition
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_RPC_MSG_H
-#define _RPC_RPC_MSG_H
-
-#define RPC_MSG_VERSION		((u_int32_t) 2)
-#define RPC_SERVICE_PORT	((u_short) 2048)
-
-/*
- * Bottom up definition of an rpc message.
- * NOTE: call and reply use the same overall stuct but
- * different parts of unions within it.
- */
-
-enum msg_type {
-	CALL=0,
-	REPLY=1
-};
-
-enum reply_stat {
-	MSG_ACCEPTED=0,
-	MSG_DENIED=1
-};
-
-enum accept_stat {
-	SUCCESS=0,
-	PROG_UNAVAIL=1,
-	PROG_MISMATCH=2,
-	PROC_UNAVAIL=3,
-	GARBAGE_ARGS=4,
-	SYSTEM_ERR=5
-};
-
-enum reject_stat {
-	RPC_MISMATCH=0,
-	AUTH_ERROR=1
-};
-
-/*
- * Reply part of an rpc exchange
- */
-
-/*
- * Reply to an rpc request that was accepted by the server.
- * Note: there could be an error even though the request was
- * accepted.
- */
-struct accepted_reply {
-	struct opaque_auth	ar_verf;
-	enum accept_stat	ar_stat;
-	union {
-		struct {
-			rpcvers_t low;
-			rpcvers_t high;
-		} AR_versions;
-		struct {
-			caddr_t	where;
-			xdrproc_t proc;
-		} AR_results;
-		/* and many other null cases */
-	} ru;
-#define	ar_results	ru.AR_results
-#define	ar_vers		ru.AR_versions
-};
-
-/*
- * Reply to an rpc request that was rejected by the server.
- */
-struct rejected_reply {
-	enum reject_stat rj_stat;
-	union {
-		struct {
-			rpcvers_t low;
-			rpcvers_t high;
-		} RJ_versions;
-		enum auth_stat RJ_why;  /* why authentication did not work */
-	} ru;
-#define	rj_vers	ru.RJ_versions
-#define	rj_why	ru.RJ_why
-};
-
-/*
- * Body of a reply to an rpc request.
- */
-struct reply_body {
-	enum reply_stat rp_stat;
-	union {
-		struct accepted_reply RP_ar;
-		struct rejected_reply RP_dr;
-	} ru;
-#define	rp_acpt	ru.RP_ar
-#define	rp_rjct	ru.RP_dr
-};
-
-/*
- * Body of an rpc request call.
- */
-struct call_body {
-	rpcvers_t cb_rpcvers;	/* must be equal to two */
-	rpcprog_t cb_prog;
-	rpcvers_t cb_vers;
-	rpcproc_t cb_proc;
-	struct opaque_auth cb_cred;
-	struct opaque_auth cb_verf; /* protocol specific - provided by client */
-};
-
-/*
- * The rpc message
- */
-struct rpc_msg {
-	u_int32_t		rm_xid;
-	enum msg_type		rm_direction;
-	union {
-		struct call_body RM_cmb;
-		struct reply_body RM_rmb;
-	} ru;
-#define	rm_call		ru.RM_cmb
-#define	rm_reply	ru.RM_rmb
-};
-#define	acpted_rply	ru.RM_rmb.ru.RP_ar
-#define	rjcted_rply	ru.RM_rmb.ru.RP_dr
-
-__BEGIN_DECLS
-/*
- * XDR routine to handle a rpc message.
- * xdr_callmsg(xdrs, cmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *cmsg;
- */
-extern bool_t	xdr_callmsg(XDR *, struct rpc_msg *);
-
-/*
- * XDR routine to pre-serialize the static part of a rpc message.
- * xdr_callhdr(xdrs, cmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *cmsg;
- */
-extern bool_t	xdr_callhdr(XDR *, struct rpc_msg *);
-
-/*
- * XDR routine to handle a rpc reply.
- * xdr_replymsg(xdrs, rmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *rmsg;
- */
-extern bool_t	xdr_replymsg(XDR *, struct rpc_msg *);
-
-
-/*
- * XDR routine to handle a accepted rpc reply.
- * xdr_accepted_reply(xdrs, rej)
- * 	XDR *xdrs;
- * 	struct accepted_reply *rej;
- */
-extern bool_t	xdr_accepted_reply(XDR *, struct accepted_reply *);
-
-/*
- * XDR routine to handle a rejected rpc reply.
- * xdr_rejected_reply(xdrs, rej)
- * 	XDR *xdrs;
- * 	struct rejected_reply *rej;
- */
-extern bool_t	xdr_rejected_reply(XDR *, struct rejected_reply *);
-
-/*
- * Fills in the error part of a reply message.
- * _seterr_reply(msg, error)
- * 	struct rpc_msg *msg;
- * 	struct rpc_err *error;
- */
-extern void	_seterr_reply(struct rpc_msg *, struct rpc_err *);
-__END_DECLS
-
-#endif /* !_RPC_RPC_MSG_H */
diff --git a/newlib/libc/sys/linux/include/rpc/rpcb_clnt.h b/newlib/libc/sys/linux/include/rpc/rpcb_clnt.h
deleted file mode 100644
index 3b9966b3b..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpcb_clnt.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*	$NetBSD: rpcb_clnt.h,v 1.1 2000/06/02 22:57:56 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/rpcb_clnt.h,v 1.2 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * rpcb_clnt.h
- * Supplies C routines to get to rpcbid services.
- *
- */
-
-/*
- * Usage:
- *	success = rpcb_set(program, version, nconf, address);
- *	success = rpcb_unset(program, version, nconf);
- *	success = rpcb_getaddr(program, version, nconf, host);
- *	head = rpcb_getmaps(nconf, host);
- *	clnt_stat = rpcb_rmtcall(nconf, host, program, version, procedure,
- *		xdrargs, argsp, xdrres, resp, tout, addr_ptr)
- *	success = rpcb_gettime(host, timep)
- *	uaddr = rpcb_taddr2uaddr(nconf, taddr);
- *	taddr = rpcb_uaddr2uaddr(nconf, uaddr);
- */
-
-#ifndef _RPC_RPCB_CLNT_H
-#define	_RPC_RPCB_CLNT_H
-
-/* #pragma ident	"@(#)rpcb_clnt.h	1.13	94/04/25 SMI" */
-/* rpcb_clnt.h 1.3 88/12/05 SMI */
-
-#include <rpc/types.h>
-#include <rpc/rpcb_prot.h>
-
-__BEGIN_DECLS
-extern bool_t rpcb_set(const rpcprog_t, const rpcvers_t,
-		       const struct netconfig  *, const struct netbuf *);
-extern bool_t rpcb_unset(const rpcprog_t, const rpcvers_t,
-			 const struct netconfig *);
-extern rpcblist	*rpcb_getmaps(const struct netconfig *, const char *);
-extern enum clnt_stat rpcb_rmtcall(const struct netconfig *,
-				   const char *, const rpcprog_t,
-				   const rpcvers_t, const rpcproc_t,
-				   const xdrproc_t, const caddr_t,
-				   const xdrproc_t, const caddr_t,
-				   const struct timeval,
-				   const struct netbuf *);
-extern bool_t rpcb_getaddr(const rpcprog_t, const rpcvers_t,
-			   const struct netconfig *, struct netbuf *,
-			   const  char *);
-extern bool_t rpcb_gettime(const char *, time_t *);
-extern char *rpcb_taddr2uaddr(struct netconfig *, struct netbuf *);
-extern struct netbuf *rpcb_uaddr2taddr(struct netconfig *, char *);
-__END_DECLS
-
-#endif	/* !_RPC_RPCB_CLNT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/rpcb_prot.h b/newlib/libc/sys/linux/include/rpc/rpcb_prot.h
deleted file mode 100644
index 1442603ee..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpcb_prot.h
+++ /dev/null
@@ -1,660 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _RPCB_PROT_H_RPCGEN
-#define _RPCB_PROT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * $FreeBSD: src/include/rpc/rpcb_prot.x,v 1.3 2002/03/13 10:29:06 obrien Exp $
- *
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1988 by Sun Microsystems, Inc.
- */
-/* from rpcb_prot.x */
-
-/* #pragma ident	"@(#)rpcb_prot.x	1.5	94/04/29 SMI" */
-
-#ifndef _KERNEL
-
-
-/*
- * The following procedures are supported by the protocol in version 3:
- *
- * RPCBPROC_NULL() returns ()
- * 	takes nothing, returns nothing
- *
- * RPCBPROC_SET(rpcb) returns (bool_t)
- * 	TRUE is success, FALSE is failure.  Registers the tuple
- *	[prog, vers, address, owner, netid].
- *	Finds out owner and netid information on its own.
- *
- * RPCBPROC_UNSET(rpcb) returns (bool_t)
- *	TRUE is success, FALSE is failure.  Un-registers tuple
- *	[prog, vers, netid].  addresses is ignored.
- *	If netid is NULL, unregister all.
- *
- * RPCBPROC_GETADDR(rpcb) returns (string).
- *	0 is failure.  Otherwise returns the universal address where the
- *	triple [prog, vers, netid] is registered.  Ignore address and owner.
- *
- * RPCBPROC_DUMP() RETURNS (rpcblist_ptr)
- *	used to dump the entire rpcbind maps
- *
- * RPCBPROC_CALLIT(rpcb_rmtcallargs)
- * 	RETURNS (rpcb_rmtcallres);
- * 	Calls the procedure on the remote machine.  If it is not registered,
- *	this procedure is quiet; i.e. it does not return error information!!!
- *	This routine only passes null authentication parameters.
- *	It has no interface to xdr routines for RPCBPROC_CALLIT.
- *
- * RPCBPROC_GETTIME() returns (int).
- *	Gets the remote machines time
- *
- * RPCBPROC_UADDR2TADDR(strint) RETURNS (struct netbuf)
- *	Returns the netbuf address from universal address.
- *
- * RPCBPROC_TADDR2UADDR(struct netbuf) RETURNS (string)
- *	Returns the universal address from netbuf address.
- *
- * END OF RPCBIND VERSION 3 PROCEDURES
- */
-/*
- * Except for RPCBPROC_CALLIT, the procedures above are carried over to
- * rpcbind version 4.  Those below are added or modified for version 4.
- * NOTE: RPCBPROC_BCAST HAS THE SAME FUNCTIONALITY AND PROCEDURE NUMBER
- * AS RPCBPROC_CALLIT.
- *
- * RPCBPROC_BCAST(rpcb_rmtcallargs)
- * 	RETURNS (rpcb_rmtcallres);
- * 	Calls the procedure on the remote machine.  If it is not registered,
- *	this procedure IS quiet; i.e. it DOES NOT return error information!!!
- *	This routine should be used for broadcasting and nothing else.
- *
- * RPCBPROC_GETVERSADDR(rpcb) returns (string).
- *	0 is failure.  Otherwise returns the universal address where the
- *	triple [prog, vers, netid] is registered.  Ignore address and owner.
- *	Same as RPCBPROC_GETADDR except that if the given version number
- *	is not available, the address is not returned.
- *
- * RPCBPROC_INDIRECT(rpcb_rmtcallargs)
- * 	RETURNS (rpcb_rmtcallres);
- * 	Calls the procedure on the remote machine.  If it is not registered,
- *	this procedure is NOT quiet; i.e. it DOES return error information!!!
- * 	as any normal application would expect.
- *
- * RPCBPROC_GETADDRLIST(rpcb) returns (rpcb_entry_list_ptr).
- *	Same as RPCBPROC_GETADDR except that it returns a list of all the
- *	addresses registered for the combination (prog, vers) (for all
- *	transports).
- *
- * RPCBPROC_GETSTAT(void) returns (rpcb_stat_byvers)
- *	Returns the statistics about the kind of requests received by rpcbind.
- */
-
-/*
- * A mapping of (program, version, network ID) to address
- */
-
-struct rpcb {
-	rpcprog_t r_prog;
-	rpcvers_t r_vers;
-	char *r_netid;
-	char *r_addr;
-	char *r_owner;
-};
-typedef struct rpcb rpcb;
-
-typedef rpcb RPCB;
-
-
-/*
- * A list of mappings
- *
- * Below are two definitions for the rpcblist structure.  This is done because
- * xdr_rpcblist() is specified to take a struct rpcblist **, rather than a
- * struct rpcblist * that rpcgen would produce.  One version of the rpcblist
- * structure (actually called rp__list) is used with rpcgen, and the other is
- * defined only in the header file for compatibility with the specified
- * interface.
- */
-
-struct rp__list {
-	rpcb rpcb_map;
-	struct rp__list *rpcb_next;
-};
-typedef struct rp__list rp__list;
-
-typedef rp__list *rpcblist_ptr;
-
-typedef struct rp__list rpcblist;
-typedef struct rp__list RPCBLIST;
-
-#ifndef __cplusplus
-struct rpcblist {
- RPCB rpcb_map;
- struct rpcblist *rpcb_next;
-};
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-extern bool_t xdr_rpcblist(XDR *, rpcblist**);
-#ifdef __cplusplus
-}
-#endif
-
-
-/*
- * Arguments of remote calls
- */
-
-struct rpcb_rmtcallargs {
-	rpcprog_t prog;
-	rpcvers_t vers;
-	rpcproc_t proc;
-	struct {
-		u_int args_len;
-		char *args_val;
-	} args;
-};
-typedef struct rpcb_rmtcallargs rpcb_rmtcallargs;
-
-/*
- * Client-side only representation of rpcb_rmtcallargs structure.
- *
- * The routine that XDRs the rpcb_rmtcallargs structure must deal with the
- * opaque arguments in the "args" structure.  xdr_rpcb_rmtcallargs() needs to
- * be passed the XDR routine that knows the args' structure.  This routine
- * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since
- * the application being called already knows the args structure.  So we use a
- * different "XDR" structure on the client side, r_rpcb_rmtcallargs, which
- * includes the args' XDR routine.
- */
-struct r_rpcb_rmtcallargs {
- rpcprog_t prog;
- rpcvers_t vers;
- rpcproc_t proc;
- struct {
- u_int args_len;
- char *args_val;
- } args;
- xdrproc_t xdr_args; /* encodes args */
-};
-
-
-/*
- * Results of the remote call
- */
-
-struct rpcb_rmtcallres {
-	char *addr;
-	struct {
-		u_int results_len;
-		char *results_val;
-	} results;
-};
-typedef struct rpcb_rmtcallres rpcb_rmtcallres;
-
-/*
- * Client-side only representation of rpcb_rmtcallres structure.
- */
-struct r_rpcb_rmtcallres {
- char *addr;
- struct {
- u_int32_t results_len;
- char *results_val;
- } results;
- xdrproc_t xdr_res; /* decodes results */
-};
-
-/*
- * rpcb_entry contains a merged address of a service on a particular
- * transport, plus associated netconfig information.  A list of rpcb_entrys
- * is returned by RPCBPROC_GETADDRLIST.  See netconfig.h for values used
- * in r_nc_* fields.
- */
-
-struct rpcb_entry {
-	char *r_maddr;
-	char *r_nc_netid;
-	u_int r_nc_semantics;
-	char *r_nc_protofmly;
-	char *r_nc_proto;
-};
-typedef struct rpcb_entry rpcb_entry;
-
-/*
- * A list of addresses supported by a service.
- */
-
-struct rpcb_entry_list {
-	rpcb_entry rpcb_entry_map;
-	struct rpcb_entry_list *rpcb_entry_next;
-};
-typedef struct rpcb_entry_list rpcb_entry_list;
-
-typedef rpcb_entry_list *rpcb_entry_list_ptr;
-
-/*
- * rpcbind statistics
- */
-
-#define rpcb_highproc_2 RPCBPROC_CALLIT
-#define rpcb_highproc_3 RPCBPROC_TADDR2UADDR
-#define rpcb_highproc_4 RPCBPROC_GETSTAT
-#define RPCBSTAT_HIGHPROC 13
-#define RPCBVERS_STAT 3
-#define RPCBVERS_4_STAT 2
-#define RPCBVERS_3_STAT 1
-#define RPCBVERS_2_STAT 0
-
-/* Link list of all the stats about getport and getaddr */
-
-struct rpcbs_addrlist {
-	rpcprog_t prog;
-	rpcvers_t vers;
-	int success;
-	int failure;
-	char *netid;
-	struct rpcbs_addrlist *next;
-};
-typedef struct rpcbs_addrlist rpcbs_addrlist;
-
-/* Link list of all the stats about rmtcall */
-
-struct rpcbs_rmtcalllist {
-	rpcprog_t prog;
-	rpcvers_t vers;
-	rpcproc_t proc;
-	int success;
-	int failure;
-	int indirect;
-	char *netid;
-	struct rpcbs_rmtcalllist *next;
-};
-typedef struct rpcbs_rmtcalllist rpcbs_rmtcalllist;
-
-typedef int rpcbs_proc[RPCBSTAT_HIGHPROC];
-
-typedef rpcbs_addrlist *rpcbs_addrlist_ptr;
-
-typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr;
-
-struct rpcb_stat {
-	rpcbs_proc info;
-	int setinfo;
-	int unsetinfo;
-	rpcbs_addrlist_ptr addrinfo;
-	rpcbs_rmtcalllist_ptr rmtinfo;
-};
-typedef struct rpcb_stat rpcb_stat;
-
-/*
- * One rpcb_stat structure is returned for each version of rpcbind
- * being monitored.
- */
-
-typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
-
-/*
- * We don't define netbuf in RPCL, since it would contain structure member
- * names that would conflict with the definition of struct netbuf in
- * <tiuser.h>.  Instead we merely declare the XDR routine xdr_netbuf() here,
- * and implement it ourselves in rpc/rpcb_prot.c.
- */
-#ifdef __cplusplus
-extern "C" bool_t xdr_netbuf(XDR *, struct netbuf *);
-
-#else /* __STDC__ */
-extern bool_t xdr_netbuf(XDR *, struct netbuf *);
-
-#endif
-
-#define RPCBVERS_3 RPCBVERS
-#define RPCBVERS_4 RPCBVERS4
-
-#define _PATH_RPCBINDSOCK "/var/run/rpcbind.sock"
-
-#else /* ndef _KERNEL */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * A mapping of (program, version, network ID) to address
- */
-struct rpcb {
- rpcprog_t r_prog; /* program number */
- rpcvers_t r_vers; /* version number */
- char *r_netid; /* network id */
- char *r_addr; /* universal address */
- char *r_owner; /* owner of the mapping */
-};
-typedef struct rpcb RPCB;
-
-/*
- * A list of mappings
- */
-struct rpcblist {
- RPCB rpcb_map;
- struct rpcblist *rpcb_next;
-};
-typedef struct rpcblist RPCBLIST;
-typedef struct rpcblist *rpcblist_ptr;
-
-/*
- * Remote calls arguments
- */
-struct rpcb_rmtcallargs {
- rpcprog_t prog; /* program number */
- rpcvers_t vers; /* version number */
- rpcproc_t proc; /* procedure number */
- u_int32_t arglen; /* arg len */
- caddr_t args_ptr; /* argument */
- xdrproc_t xdr_args; /* XDR routine for argument */
-};
-typedef struct rpcb_rmtcallargs rpcb_rmtcallargs;
-
-/*
- * Remote calls results
- */
-struct rpcb_rmtcallres {
- char *addr_ptr; /* remote universal address */
- u_int32_t resultslen; /* results length */
- caddr_t results_ptr; /* results */
- xdrproc_t xdr_results; /* XDR routine for result */
-};
-typedef struct rpcb_rmtcallres rpcb_rmtcallres;
-
-struct rpcb_entry {
- char *r_maddr;
- char *r_nc_netid;
- unsigned int r_nc_semantics;
- char *r_nc_protofmly;
- char *r_nc_proto;
-};
-typedef struct rpcb_entry rpcb_entry;
-
-/*
- * A list of addresses supported by a service.
- */
-
-struct rpcb_entry_list {
- rpcb_entry rpcb_entry_map;
- struct rpcb_entry_list *rpcb_entry_next;
-};
-typedef struct rpcb_entry_list rpcb_entry_list;
-
-typedef rpcb_entry_list *rpcb_entry_list_ptr;
-
-/*
- * rpcbind statistics
- */
-
-#define rpcb_highproc_2 RPCBPROC_CALLIT
-#define rpcb_highproc_3 RPCBPROC_TADDR2UADDR
-#define rpcb_highproc_4 RPCBPROC_GETSTAT
-#define RPCBSTAT_HIGHPROC 13
-#define RPCBVERS_STAT 3
-#define RPCBVERS_4_STAT 2
-#define RPCBVERS_3_STAT 1
-#define RPCBVERS_2_STAT 0
-
-/* Link list of all the stats about getport and getaddr */
-
-struct rpcbs_addrlist {
- rpcprog_t prog;
- rpcvers_t vers;
- int success;
- int failure;
- char *netid;
- struct rpcbs_addrlist *next;
-};
-typedef struct rpcbs_addrlist rpcbs_addrlist;
-
-/* Link list of all the stats about rmtcall */
-
-struct rpcbs_rmtcalllist {
- rpcprog_t prog;
- rpcvers_t vers;
- rpcproc_t proc;
- int success;
- int failure;
- int indirect;
- char *netid;
- struct rpcbs_rmtcalllist *next;
-};
-typedef struct rpcbs_rmtcalllist rpcbs_rmtcalllist;
-
-typedef int rpcbs_proc[RPCBSTAT_HIGHPROC];
-
-typedef rpcbs_addrlist *rpcbs_addrlist_ptr;
-
-typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr;
-
-struct rpcb_stat {
- rpcbs_proc info;
- int setinfo;
- int unsetinfo;
- rpcbs_addrlist_ptr addrinfo;
- rpcbs_rmtcalllist_ptr rmtinfo;
-};
-typedef struct rpcb_stat rpcb_stat;
-
-/*
- * One rpcb_stat structure is returned for each version of rpcbind
- * being monitored.
- */
-
-typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ndef _KERNEL */
-
-#define RPCBPROG 100000
-#define RPCBVERS 3
-
-#if defined(__STDC__) || defined(__cplusplus)
-#define RPCBPROC_SET 1
-extern  bool_t * rpcbproc_set_3(rpcb *, CLIENT *);
-extern  bool_t * rpcbproc_set_3_svc(rpcb *, struct svc_req *);
-#define RPCBPROC_UNSET 2
-extern  bool_t * rpcbproc_unset_3(rpcb *, CLIENT *);
-extern  bool_t * rpcbproc_unset_3_svc(rpcb *, struct svc_req *);
-#define RPCBPROC_GETADDR 3
-extern  char ** rpcbproc_getaddr_3(rpcb *, CLIENT *);
-extern  char ** rpcbproc_getaddr_3_svc(rpcb *, struct svc_req *);
-#define RPCBPROC_DUMP 4
-extern  rpcblist_ptr * rpcbproc_dump_3(void *, CLIENT *);
-extern  rpcblist_ptr * rpcbproc_dump_3_svc(void *, struct svc_req *);
-#define RPCBPROC_CALLIT 5
-extern  rpcb_rmtcallres * rpcbproc_callit_3(rpcb_rmtcallargs *, CLIENT *);
-extern  rpcb_rmtcallres * rpcbproc_callit_3_svc(rpcb_rmtcallargs *, struct svc_req *);
-#define RPCBPROC_GETTIME 6
-extern  u_int * rpcbproc_gettime_3(void *, CLIENT *);
-extern  u_int * rpcbproc_gettime_3_svc(void *, struct svc_req *);
-#define RPCBPROC_UADDR2TADDR 7
-extern  struct netbuf * rpcbproc_uaddr2taddr_3(char **, CLIENT *);
-extern  struct netbuf * rpcbproc_uaddr2taddr_3_svc(char **, struct svc_req *);
-#define RPCBPROC_TADDR2UADDR 8
-extern  char ** rpcbproc_taddr2uaddr_3(struct netbuf *, CLIENT *);
-extern  char ** rpcbproc_taddr2uaddr_3_svc(struct netbuf *, struct svc_req *);
-extern int rpcbprog_3_freeresult (SVCXPRT *, xdrproc_t, caddr_t);
-
-#else /* K&R C */
-#define RPCBPROC_SET 1
-extern  bool_t * rpcbproc_set_3();
-extern  bool_t * rpcbproc_set_3_svc();
-#define RPCBPROC_UNSET 2
-extern  bool_t * rpcbproc_unset_3();
-extern  bool_t * rpcbproc_unset_3_svc();
-#define RPCBPROC_GETADDR 3
-extern  char ** rpcbproc_getaddr_3();
-extern  char ** rpcbproc_getaddr_3_svc();
-#define RPCBPROC_DUMP 4
-extern  rpcblist_ptr * rpcbproc_dump_3();
-extern  rpcblist_ptr * rpcbproc_dump_3_svc();
-#define RPCBPROC_CALLIT 5
-extern  rpcb_rmtcallres * rpcbproc_callit_3();
-extern  rpcb_rmtcallres * rpcbproc_callit_3_svc();
-#define RPCBPROC_GETTIME 6
-extern  u_int * rpcbproc_gettime_3();
-extern  u_int * rpcbproc_gettime_3_svc();
-#define RPCBPROC_UADDR2TADDR 7
-extern  struct netbuf * rpcbproc_uaddr2taddr_3();
-extern  struct netbuf * rpcbproc_uaddr2taddr_3_svc();
-#define RPCBPROC_TADDR2UADDR 8
-extern  char ** rpcbproc_taddr2uaddr_3();
-extern  char ** rpcbproc_taddr2uaddr_3_svc();
-extern int rpcbprog_3_freeresult ();
-#endif /* K&R C */
-#define RPCBVERS4 4
-
-#if defined(__STDC__) || defined(__cplusplus)
-extern  bool_t * rpcbproc_set_4(rpcb *, CLIENT *);
-extern  bool_t * rpcbproc_set_4_svc(rpcb *, struct svc_req *);
-extern  bool_t * rpcbproc_unset_4(rpcb *, CLIENT *);
-extern  bool_t * rpcbproc_unset_4_svc(rpcb *, struct svc_req *);
-extern  char ** rpcbproc_getaddr_4(rpcb *, CLIENT *);
-extern  char ** rpcbproc_getaddr_4_svc(rpcb *, struct svc_req *);
-extern  rpcblist_ptr * rpcbproc_dump_4(void *, CLIENT *);
-extern  rpcblist_ptr * rpcbproc_dump_4_svc(void *, struct svc_req *);
-#define RPCBPROC_BCAST RPCBPROC_CALLIT
-extern  rpcb_rmtcallres * rpcbproc_bcast_4(rpcb_rmtcallargs *, CLIENT *);
-extern  rpcb_rmtcallres * rpcbproc_bcast_4_svc(rpcb_rmtcallargs *, struct svc_req *);
-extern  u_int * rpcbproc_gettime_4(void *, CLIENT *);
-extern  u_int * rpcbproc_gettime_4_svc(void *, struct svc_req *);
-extern  struct netbuf * rpcbproc_uaddr2taddr_4(char **, CLIENT *);
-extern  struct netbuf * rpcbproc_uaddr2taddr_4_svc(char **, struct svc_req *);
-extern  char ** rpcbproc_taddr2uaddr_4(struct netbuf *, CLIENT *);
-extern  char ** rpcbproc_taddr2uaddr_4_svc(struct netbuf *, struct svc_req *);
-#define RPCBPROC_GETVERSADDR 9
-extern  char ** rpcbproc_getversaddr_4(rpcb *, CLIENT *);
-extern  char ** rpcbproc_getversaddr_4_svc(rpcb *, struct svc_req *);
-#define RPCBPROC_INDIRECT 10
-extern  rpcb_rmtcallres * rpcbproc_indirect_4(rpcb_rmtcallargs *, CLIENT *);
-extern  rpcb_rmtcallres * rpcbproc_indirect_4_svc(rpcb_rmtcallargs *, struct svc_req *);
-#define RPCBPROC_GETADDRLIST 11
-extern  rpcb_entry_list_ptr * rpcbproc_getaddrlist_4(rpcb *, CLIENT *);
-extern  rpcb_entry_list_ptr * rpcbproc_getaddrlist_4_svc(rpcb *, struct svc_req *);
-#define RPCBPROC_GETSTAT 12
-extern  rpcb_stat * rpcbproc_getstat_4(void *, CLIENT *);
-extern  rpcb_stat * rpcbproc_getstat_4_svc(void *, struct svc_req *);
-extern int rpcbprog_4_freeresult (SVCXPRT *, xdrproc_t, caddr_t);
-
-#else /* K&R C */
-extern  bool_t * rpcbproc_set_4();
-extern  bool_t * rpcbproc_set_4_svc();
-extern  bool_t * rpcbproc_unset_4();
-extern  bool_t * rpcbproc_unset_4_svc();
-extern  char ** rpcbproc_getaddr_4();
-extern  char ** rpcbproc_getaddr_4_svc();
-extern  rpcblist_ptr * rpcbproc_dump_4();
-extern  rpcblist_ptr * rpcbproc_dump_4_svc();
-#define RPCBPROC_BCAST RPCBPROC_CALLIT
-extern  rpcb_rmtcallres * rpcbproc_bcast_4();
-extern  rpcb_rmtcallres * rpcbproc_bcast_4_svc();
-extern  u_int * rpcbproc_gettime_4();
-extern  u_int * rpcbproc_gettime_4_svc();
-extern  struct netbuf * rpcbproc_uaddr2taddr_4();
-extern  struct netbuf * rpcbproc_uaddr2taddr_4_svc();
-extern  char ** rpcbproc_taddr2uaddr_4();
-extern  char ** rpcbproc_taddr2uaddr_4_svc();
-#define RPCBPROC_GETVERSADDR 9
-extern  char ** rpcbproc_getversaddr_4();
-extern  char ** rpcbproc_getversaddr_4_svc();
-#define RPCBPROC_INDIRECT 10
-extern  rpcb_rmtcallres * rpcbproc_indirect_4();
-extern  rpcb_rmtcallres * rpcbproc_indirect_4_svc();
-#define RPCBPROC_GETADDRLIST 11
-extern  rpcb_entry_list_ptr * rpcbproc_getaddrlist_4();
-extern  rpcb_entry_list_ptr * rpcbproc_getaddrlist_4_svc();
-#define RPCBPROC_GETSTAT 12
-extern  rpcb_stat * rpcbproc_getstat_4();
-extern  rpcb_stat * rpcbproc_getstat_4_svc();
-extern int rpcbprog_4_freeresult ();
-#endif /* K&R C */
-
-/* the xdr functions */
-
-#if defined(__STDC__) || defined(__cplusplus)
-extern  bool_t xdr_rpcb (XDR *, rpcb*);
-extern  bool_t xdr_rp__list (XDR *, rp__list*);
-extern  bool_t xdr_rpcblist_ptr (XDR *, rpcblist_ptr*);
-extern  bool_t xdr_rpcb_rmtcallargs (XDR *, rpcb_rmtcallargs*);
-extern  bool_t xdr_rpcb_rmtcallres (XDR *, rpcb_rmtcallres*);
-extern  bool_t xdr_rpcb_entry (XDR *, rpcb_entry*);
-extern  bool_t xdr_rpcb_entry_list (XDR *, rpcb_entry_list*);
-extern  bool_t xdr_rpcb_entry_list_ptr (XDR *, rpcb_entry_list_ptr*);
-extern  bool_t xdr_rpcbs_addrlist (XDR *, rpcbs_addrlist*);
-extern  bool_t xdr_rpcbs_rmtcalllist (XDR *, rpcbs_rmtcalllist*);
-extern  bool_t xdr_rpcbs_proc (XDR *, rpcbs_proc);
-extern  bool_t xdr_rpcbs_addrlist_ptr (XDR *, rpcbs_addrlist_ptr*);
-extern  bool_t xdr_rpcbs_rmtcalllist_ptr (XDR *, rpcbs_rmtcalllist_ptr*);
-extern  bool_t xdr_rpcb_stat (XDR *, rpcb_stat*);
-extern  bool_t xdr_rpcb_stat_byvers (XDR *, rpcb_stat_byvers);
-
-#else /* K&R C */
-extern bool_t xdr_rpcb ();
-extern bool_t xdr_rp__list ();
-extern bool_t xdr_rpcblist_ptr ();
-extern bool_t xdr_rpcb_rmtcallargs ();
-extern bool_t xdr_rpcb_rmtcallres ();
-extern bool_t xdr_rpcb_entry ();
-extern bool_t xdr_rpcb_entry_list ();
-extern bool_t xdr_rpcb_entry_list_ptr ();
-extern bool_t xdr_rpcbs_addrlist ();
-extern bool_t xdr_rpcbs_rmtcalllist ();
-extern bool_t xdr_rpcbs_proc ();
-extern bool_t xdr_rpcbs_addrlist_ptr ();
-extern bool_t xdr_rpcbs_rmtcalllist_ptr ();
-extern bool_t xdr_rpcb_stat ();
-extern bool_t xdr_rpcb_stat_byvers ();
-
-#endif /* K&R C */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !_RPCB_PROT_H_RPCGEN */
diff --git a/newlib/libc/sys/linux/include/rpc/rpcb_prot.x b/newlib/libc/sys/linux/include/rpc/rpcb_prot.x
deleted file mode 100644
index 39f162776..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpcb_prot.x
+++ /dev/null
@@ -1,554 +0,0 @@
-%/*
-% * $FreeBSD: src/include/rpc/rpcb_prot.x,v 1.3 2002/03/13 10:29:06 obrien Exp $
-% *
-% * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
-% * unrestricted use provided that this legend is included on all tape
-% * media and as a part of the software program in whole or part.  Users
-% * may copy or modify Sun RPC without charge, but are not authorized
-% * to license or distribute it to anyone else except as part of a product or
-% * program developed by the user.
-% *
-% * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
-% * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
-% * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
-% *
-% * Sun RPC is provided with no support and without any obligation on the
-% * part of Sun Microsystems, Inc. to assist in its use, correction,
-% * modification or enhancement.
-% *
-% * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
-% * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
-% * OR ANY PART THEREOF.
-% *
-% * In no event will Sun Microsystems, Inc. be liable for any lost revenue
-% * or profits or other special, indirect and consequential damages, even if
-% * Sun has been advised of the possibility of such damages.
-% *
-% * Sun Microsystems, Inc.
-% * 2550 Garcia Avenue
-% * Mountain View, California  94043
-% */
-%/*
-% * Copyright (c) 1988 by Sun Microsystems, Inc.
-% */
-
-%/* from rpcb_prot.x */
-
-#ifdef RPC_HDR
-%
-%/* #pragma ident	"@(#)rpcb_prot.x	1.5	94/04/29 SMI" */
-%
-%#ifndef _KERNEL
-%
-#endif
-
-/*
- * rpcb_prot.x
- * rpcbind protocol, versions 3 and 4, in RPC Language
- */
-%
-%/*
-% * The following procedures are supported by the protocol in version 3:
-% *
-% * RPCBPROC_NULL() returns ()
-% * 	takes nothing, returns nothing
-% *
-% * RPCBPROC_SET(rpcb) returns (bool_t)
-% * 	TRUE is success, FALSE is failure.  Registers the tuple
-% *	[prog, vers, address, owner, netid].
-% *	Finds out owner and netid information on its own.
-% *
-% * RPCBPROC_UNSET(rpcb) returns (bool_t)
-% *	TRUE is success, FALSE is failure.  Un-registers tuple
-% *	[prog, vers, netid].  addresses is ignored.
-% *	If netid is NULL, unregister all.
-% *
-% * RPCBPROC_GETADDR(rpcb) returns (string).
-% *	0 is failure.  Otherwise returns the universal address where the
-% *	triple [prog, vers, netid] is registered.  Ignore address and owner.
-% *
-% * RPCBPROC_DUMP() RETURNS (rpcblist_ptr)
-% *	used to dump the entire rpcbind maps
-% *
-% * RPCBPROC_CALLIT(rpcb_rmtcallargs)
-% * 	RETURNS (rpcb_rmtcallres);
-% * 	Calls the procedure on the remote machine.  If it is not registered,
-% *	this procedure is quiet; i.e. it does not return error information!!!
-% *	This routine only passes null authentication parameters.
-% *	It has no interface to xdr routines for RPCBPROC_CALLIT.
-% *
-% * RPCBPROC_GETTIME() returns (int).
-% *	Gets the remote machines time
-% *
-% * RPCBPROC_UADDR2TADDR(strint) RETURNS (struct netbuf)
-% *	Returns the netbuf address from universal address.
-% *
-% * RPCBPROC_TADDR2UADDR(struct netbuf) RETURNS (string)
-% *	Returns the universal address from netbuf address.
-% *
-% * END OF RPCBIND VERSION 3 PROCEDURES
-% */
-%/*
-% * Except for RPCBPROC_CALLIT, the procedures above are carried over to
-% * rpcbind version 4.  Those below are added or modified for version 4.
-% * NOTE: RPCBPROC_BCAST HAS THE SAME FUNCTIONALITY AND PROCEDURE NUMBER
-% * AS RPCBPROC_CALLIT.
-% *
-% * RPCBPROC_BCAST(rpcb_rmtcallargs)
-% * 	RETURNS (rpcb_rmtcallres);
-% * 	Calls the procedure on the remote machine.  If it is not registered,
-% *	this procedure IS quiet; i.e. it DOES NOT return error information!!!
-% *	This routine should be used for broadcasting and nothing else.
-% *
-% * RPCBPROC_GETVERSADDR(rpcb) returns (string).
-% *	0 is failure.  Otherwise returns the universal address where the
-% *	triple [prog, vers, netid] is registered.  Ignore address and owner.
-% *	Same as RPCBPROC_GETADDR except that if the given version number
-% *	is not available, the address is not returned.
-% *
-% * RPCBPROC_INDIRECT(rpcb_rmtcallargs)
-% * 	RETURNS (rpcb_rmtcallres);
-% * 	Calls the procedure on the remote machine.  If it is not registered,
-% *	this procedure is NOT quiet; i.e. it DOES return error information!!!
-% * 	as any normal application would expect.
-% *
-% * RPCBPROC_GETADDRLIST(rpcb) returns (rpcb_entry_list_ptr).
-% *	Same as RPCBPROC_GETADDR except that it returns a list of all the
-% *	addresses registered for the combination (prog, vers) (for all
-% *	transports).
-% *
-% * RPCBPROC_GETSTAT(void) returns (rpcb_stat_byvers)
-% *	Returns the statistics about the kind of requests received by rpcbind.
-% */
-%
-%/*
-% * A mapping of (program, version, network ID) to address
-% */
-struct rpcb {
-	rpcprog_t r_prog;		/* program number */
-	rpcvers_t r_vers;		/* version number */
-	string r_netid<>;		/* network id */
-	string r_addr<>;		/* universal address */
-	string r_owner<>;		/* owner of this service */
-};
-#ifdef RPC_HDR
-%
-%typedef rpcb RPCB;
-%
-#endif
-%
-%/*
-% * A list of mappings
-% *
-% * Below are two definitions for the rpcblist structure.  This is done because
-% * xdr_rpcblist() is specified to take a struct rpcblist **, rather than a
-% * struct rpcblist * that rpcgen would produce.  One version of the rpcblist
-% * structure (actually called rp__list) is used with rpcgen, and the other is
-% * defined only in the header file for compatibility with the specified
-% * interface.
-% */
-
-struct rp__list {
-	rpcb rpcb_map;
-	struct rp__list *rpcb_next;
-};
-
-typedef rp__list *rpcblist_ptr;		/* results of RPCBPROC_DUMP */
-
-#ifdef RPC_HDR
-%
-%typedef struct rp__list rpcblist;
-%typedef struct rp__list RPCBLIST;
-%
-%#ifndef __cplusplus
-%struct rpcblist {
-%	RPCB rpcb_map;
-%	struct rpcblist *rpcb_next;
-%};
-%#endif
-%
-%#ifdef __cplusplus
-%extern "C" {
-%#endif
-%extern  bool_t xdr_rpcblist(XDR *, rpcblist**);
-%#ifdef	__cplusplus
-%}
-%#endif
-%
-#endif
-
-%
-%/*
-% * Arguments of remote calls
-% */
-struct rpcb_rmtcallargs {
-	rpcprog_t prog;			/* program number */
-	rpcvers_t vers;			/* version number */
-	rpcproc_t proc;			/* procedure number */
-	opaque args<>;			/* argument */
-};
-#ifdef RPC_HDR
-%
-%/*
-% * Client-side only representation of rpcb_rmtcallargs structure.
-% *
-% * The routine that XDRs the rpcb_rmtcallargs structure must deal with the
-% * opaque arguments in the "args" structure.  xdr_rpcb_rmtcallargs() needs to
-% * be passed the XDR routine that knows the args' structure.  This routine
-% * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since
-% * the application being called already knows the args structure.  So we use a
-% * different "XDR" structure on the client side, r_rpcb_rmtcallargs, which
-% * includes the args' XDR routine.
-% */
-%struct r_rpcb_rmtcallargs {
-%	rpcprog_t prog;
-%	rpcvers_t vers;
-%	rpcproc_t proc;
-%	struct {
-%		u_int args_len;
-%		char *args_val;
-%	} args;
-%	xdrproc_t	xdr_args;	/* encodes args */
-%};
-%
-#endif	/* def RPC_HDR */
-%
-%/*
-% * Results of the remote call
-% */
-struct rpcb_rmtcallres {
-	string addr<>;			/* remote universal address */
-	opaque results<>;		/* result */
-};
-#ifdef RPC_HDR
-%
-%/*
-% * Client-side only representation of rpcb_rmtcallres structure.
-% */
-%struct r_rpcb_rmtcallres {
-%	char *addr;
-%	struct {
-%		u_int32_t results_len;
-%		char *results_val;
-%	} results;
-%	xdrproc_t	xdr_res;	/* decodes results */
-%};
-#endif /* RPC_HDR */
-%
-%/*
-% * rpcb_entry contains a merged address of a service on a particular
-% * transport, plus associated netconfig information.  A list of rpcb_entrys
-% * is returned by RPCBPROC_GETADDRLIST.  See netconfig.h for values used
-% * in r_nc_* fields.
-% */
-struct rpcb_entry {
-	string		r_maddr<>;	/* merged address of service */
-	string		r_nc_netid<>;	/* netid field */
-	unsigned int	r_nc_semantics;	/* semantics of transport */
-	string		r_nc_protofmly<>; /* protocol family */
-	string		r_nc_proto<>;	/* protocol name */
-};
-%
-%/*
-% * A list of addresses supported by a service.
-% */
-struct rpcb_entry_list {
-	rpcb_entry rpcb_entry_map;
-	struct rpcb_entry_list *rpcb_entry_next;
-};
-
-typedef rpcb_entry_list *rpcb_entry_list_ptr;
-
-%
-%/*
-% * rpcbind statistics
-% */
-%
-const rpcb_highproc_2 = RPCBPROC_CALLIT;
-const rpcb_highproc_3 = RPCBPROC_TADDR2UADDR;
-const rpcb_highproc_4 = RPCBPROC_GETSTAT;
-
-const RPCBSTAT_HIGHPROC = 13;	/* # of procs in rpcbind V4 plus one */
-const RPCBVERS_STAT = 3;	/* provide only for rpcbind V2, V3 and V4 */
-const RPCBVERS_4_STAT = 2;
-const RPCBVERS_3_STAT = 1;
-const RPCBVERS_2_STAT = 0;
-%
-%/* Link list of all the stats about getport and getaddr */
-struct rpcbs_addrlist {
-	rpcprog_t prog;
-	rpcvers_t vers;
-	int success;
-	int failure;
-	string netid<>;
-	struct rpcbs_addrlist *next;
-};
-%
-%/* Link list of all the stats about rmtcall */
-struct rpcbs_rmtcalllist {
-	rpcprog_t prog;
-	rpcvers_t vers;
-	rpcproc_t proc;
-	int success;
-	int failure;
-	int indirect;	/* whether callit or indirect */
-	string netid<>;
-	struct rpcbs_rmtcalllist *next;
-};
-
-typedef int rpcbs_proc[RPCBSTAT_HIGHPROC];
-typedef rpcbs_addrlist *rpcbs_addrlist_ptr;
-typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr;
-
-struct rpcb_stat {
-	rpcbs_proc		info;
-	int			setinfo;
-	int			unsetinfo;
-	rpcbs_addrlist_ptr	addrinfo;
-	rpcbs_rmtcalllist_ptr	rmtinfo;
-};
-%
-%/*
-% * One rpcb_stat structure is returned for each version of rpcbind
-% * being monitored.
-% */
-
-typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
-
-#ifdef RPC_HDR
-%
-%/*
-% * We don't define netbuf in RPCL, since it would contain structure member
-% * names that would conflict with the definition of struct netbuf in
-% * <tiuser.h>.  Instead we merely declare the XDR routine xdr_netbuf() here,
-% * and implement it ourselves in rpc/rpcb_prot.c.
-% */
-%#ifdef __cplusplus
-%extern "C" bool_t xdr_netbuf(XDR *, struct netbuf *);
-%
-%#else /* __STDC__ */
-%extern  bool_t xdr_netbuf(XDR *, struct netbuf *);
-%
-%#endif
-#endif /* def RPC_HDR */
-
-/*
- * rpcbind procedures
- */
-program RPCBPROG {
-	version RPCBVERS {
-		bool
-		RPCBPROC_SET(rpcb) = 1;
-
-		bool
-		RPCBPROC_UNSET(rpcb) = 2;
-
-		string
-		RPCBPROC_GETADDR(rpcb) = 3;
-
-		rpcblist_ptr
-		RPCBPROC_DUMP(void) = 4;
-
-		rpcb_rmtcallres
-		RPCBPROC_CALLIT(rpcb_rmtcallargs) = 5;
-
-		unsigned int
-		RPCBPROC_GETTIME(void) = 6;
-
-		struct netbuf
-		RPCBPROC_UADDR2TADDR(string) = 7;
-
-		string
-		RPCBPROC_TADDR2UADDR(struct netbuf) = 8;
-	} = 3;
-
-	version RPCBVERS4 {
-		bool
-		RPCBPROC_SET(rpcb) = 1;
-
-		bool
-		RPCBPROC_UNSET(rpcb) = 2;
-
-		string
-		RPCBPROC_GETADDR(rpcb) = 3;
-
-		rpcblist_ptr
-		RPCBPROC_DUMP(void) = 4;
-
-		/*
-		 * NOTE: RPCBPROC_BCAST has the same functionality as CALLIT;
-		 * the new name is intended to indicate that this
-		 * procedure should be used for broadcast RPC, and
-		 * RPCBPROC_INDIRECT should be used for indirect calls.
-		 */
-		rpcb_rmtcallres
-		RPCBPROC_BCAST(rpcb_rmtcallargs) = RPCBPROC_CALLIT;
-
-		unsigned int
-		RPCBPROC_GETTIME(void) = 6;
-
-		struct netbuf
-		RPCBPROC_UADDR2TADDR(string) = 7;
-
-		string
-		RPCBPROC_TADDR2UADDR(struct netbuf) = 8;
-
-		string
-		RPCBPROC_GETVERSADDR(rpcb) = 9;
-
-		rpcb_rmtcallres
-		RPCBPROC_INDIRECT(rpcb_rmtcallargs) = 10;
-
-		rpcb_entry_list_ptr
-		RPCBPROC_GETADDRLIST(rpcb) = 11;
-
-		rpcb_stat_byvers
-		RPCBPROC_GETSTAT(void) = 12;
-	} = 4;
-} = 100000;
-#ifdef RPC_HDR
-%
-%#define	RPCBVERS_3		RPCBVERS
-%#define	RPCBVERS_4		RPCBVERS4
-%
-%#define	_PATH_RPCBINDSOCK	"/var/run/rpcbind.sock"
-%
-%#else		/* ndef _KERNEL */
-%#ifdef __cplusplus
-%extern "C" {
-%#endif
-%
-%/*
-% * A mapping of (program, version, network ID) to address
-% */
-%struct rpcb {
-%	rpcprog_t r_prog;		/* program number */
-%	rpcvers_t r_vers;		/* version number */
-%	char *r_netid;			/* network id */
-%	char *r_addr;			/* universal address */
-%	char *r_owner;			/* owner of the mapping */
-%};
-%typedef struct rpcb RPCB;
-%
-%/*
-% * A list of mappings
-% */
-%struct rpcblist {
-%	RPCB rpcb_map;
-%	struct rpcblist *rpcb_next;
-%};
-%typedef struct rpcblist RPCBLIST;
-%typedef struct rpcblist *rpcblist_ptr;
-%
-%/*
-% * Remote calls arguments
-% */
-%struct rpcb_rmtcallargs {
-%	rpcprog_t prog;			/* program number */
-%	rpcvers_t vers;			/* version number */
-%	rpcproc_t proc;			/* procedure number */
-%	u_int32_t arglen;			/* arg len */
-%	caddr_t args_ptr;		/* argument */
-%	xdrproc_t xdr_args;		/* XDR routine for argument */
-%};
-%typedef struct rpcb_rmtcallargs rpcb_rmtcallargs;
-%
-%/*
-% * Remote calls results
-% */
-%struct rpcb_rmtcallres {
-%	char *addr_ptr;			/* remote universal address */
-%	u_int32_t resultslen;		/* results length */
-%	caddr_t results_ptr;		/* results */
-%	xdrproc_t xdr_results;		/* XDR routine for result */
-%};
-%typedef struct rpcb_rmtcallres rpcb_rmtcallres;
-%
-%struct rpcb_entry {
-%	char *r_maddr;
-%	char *r_nc_netid;
-%	unsigned int r_nc_semantics;
-%	char *r_nc_protofmly;
-%	char *r_nc_proto;
-%};
-%typedef struct rpcb_entry rpcb_entry;
-%
-%/*
-% * A list of addresses supported by a service.
-% */
-%
-%struct rpcb_entry_list {
-%	rpcb_entry rpcb_entry_map;
-%	struct rpcb_entry_list *rpcb_entry_next;
-%};
-%typedef struct rpcb_entry_list rpcb_entry_list;
-%
-%typedef rpcb_entry_list *rpcb_entry_list_ptr;
-%
-%/*
-% * rpcbind statistics
-% */
-%
-%#define	rpcb_highproc_2 RPCBPROC_CALLIT
-%#define	rpcb_highproc_3 RPCBPROC_TADDR2UADDR
-%#define	rpcb_highproc_4 RPCBPROC_GETSTAT
-%#define	RPCBSTAT_HIGHPROC 13
-%#define	RPCBVERS_STAT 3
-%#define	RPCBVERS_4_STAT 2
-%#define	RPCBVERS_3_STAT 1
-%#define	RPCBVERS_2_STAT 0
-%
-%/* Link list of all the stats about getport and getaddr */
-%
-%struct rpcbs_addrlist {
-%	rpcprog_t prog;
-%	rpcvers_t vers;
-%	int success;
-%	int failure;
-%	char *netid;
-%	struct rpcbs_addrlist *next;
-%};
-%typedef struct rpcbs_addrlist rpcbs_addrlist;
-%
-%/* Link list of all the stats about rmtcall */
-%
-%struct rpcbs_rmtcalllist {
-%	rpcprog_t prog;
-%	rpcvers_t vers;
-%	rpcproc_t proc;
-%	int success;
-%	int failure;
-%	int indirect;
-%	char *netid;
-%	struct rpcbs_rmtcalllist *next;
-%};
-%typedef struct rpcbs_rmtcalllist rpcbs_rmtcalllist;
-%
-%typedef int rpcbs_proc[RPCBSTAT_HIGHPROC];
-%
-%typedef rpcbs_addrlist *rpcbs_addrlist_ptr;
-%
-%typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr;
-%
-%struct rpcb_stat {
-%	rpcbs_proc info;
-%	int setinfo;
-%	int unsetinfo;
-%	rpcbs_addrlist_ptr addrinfo;
-%	rpcbs_rmtcalllist_ptr rmtinfo;
-%};
-%typedef struct rpcb_stat rpcb_stat;
-%
-%/*
-% * One rpcb_stat structure is returned for each version of rpcbind
-% * being monitored.
-% */
-%
-%typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
-%
-%#ifdef __cplusplus
-%}
-%#endif
-%
-%#endif		/* ndef _KERNEL */
-#endif		/* RPC_HDR */
diff --git a/newlib/libc/sys/linux/include/rpc/rpcent.h b/newlib/libc/sys/linux/include/rpc/rpcent.h
deleted file mode 100644
index dbc8b0e5f..000000000
--- a/newlib/libc/sys/linux/include/rpc/rpcent.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*	$NetBSD: rpcent.h,v 1.1 2000/06/02 22:57:56 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/rpcent.h,v 1.2 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * rpcent.h,
- * For converting rpc program numbers to names etc.
- *
- */
-
-#ifndef _RPC_RPCENT_H
-#define _RPC_RPCENT_H
-
-/*	#pragma ident "@(#)rpcent.h   1.13    94/04/25 SMI"	*/
-/*      @(#)rpcent.h 1.1 88/12/06 SMI   */
-
-
-struct rpcent {
-      char    *r_name;        /* name of server for this rpc program */
-      char    **r_aliases;    /* alias list */
-      int     r_number;       /* rpc program number */
-};
-
-__BEGIN_DECLS
-extern struct rpcent *getrpcbyname_r(const char *, struct rpcent *,
-				     char *, int);
-extern struct rpcent *getrpcbynumber_r(int, struct rpcent *, char *, int);
-extern struct rpcent *getrpcent_r(struct rpcent *, char *, int);
-
-/* Old interfaces that return a pointer to a static area;  MT-unsafe */
-extern struct rpcent *getrpcbyname(char *);
-extern struct rpcent *getrpcbynumber(int);
-extern struct rpcent *getrpcent(void);
-extern void setrpcent(int);
-extern void endrpcent(void);
-__END_DECLS
-
-#endif /* !_RPC_CENT_H */
diff --git a/newlib/libc/sys/linux/include/rpc/svc.h b/newlib/libc/sys/linux/include/rpc/svc.h
deleted file mode 100644
index 6a8997bda..000000000
--- a/newlib/libc/sys/linux/include/rpc/svc.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*	$NetBSD: svc.h,v 1.17 2000/06/02 22:57:56 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)svc.h 1.35 88/12/17 SMI
- *	from: @(#)svc.h      1.27    94/04/25 SMI
- * $FreeBSD: src/include/rpc/svc.h,v 1.22 2002/04/28 15:18:45 des Exp $
- */
-
-/*
- * svc.h, Server-side remote procedure call interface.
- *
- * Copyright (C) 1986-1993 by Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_H
-#define _RPC_SVC_H
-#include <sys/cdefs.h>
-
-/*
- * This interface must manage two items concerning remote procedure calling:
- *
- * 1) An arbitrary number of transport connections upon which rpc requests
- * are received.  The two most notable transports are TCP and UDP;  they are
- * created and registered by routines in svc_tcp.c and svc_udp.c, respectively;
- * they in turn call xprt_register and xprt_unregister.
- *
- * 2) An arbitrary number of locally registered services.  Services are
- * described by the following four data: program number, version number,
- * "service dispatch" function, a transport handle, and a boolean that
- * indicates whether or not the exported program should be registered with a
- * local binder service;  if true the program's number and version and the
- * port number from the transport handle are registered with the binder.
- * These data are registered with the rpc svc system via svc_register.
- *
- * A service's dispatch function is called whenever an rpc request comes in
- * on a transport.  The request's program and version numbers must match
- * those of the registered service.  The dispatch function is passed two
- * parameters, struct svc_req * and SVCXPRT *, defined below.
- */
-
-/*
- *      Service control requests
- */
-#define SVCGET_VERSQUIET	1
-#define SVCSET_VERSQUIET	2
-
-
-enum xprt_stat {
-	XPRT_DIED,
-	XPRT_MOREREQS,
-	XPRT_IDLE
-};
-
-/*
- * Server side transport handle
- */
-typedef struct __rpc_svcxprt {
-	int		xp_fd;
-	u_short		xp_port;	 /* associated port number */
-	const struct xp_ops {
-	    /* receive incoming requests */
-	    bool_t	(*xp_recv)(struct __rpc_svcxprt *, struct rpc_msg *);
-	    /* get transport status */
-	    enum xprt_stat (*xp_stat)(struct __rpc_svcxprt *);
-	    /* get arguments */
-	    bool_t	(*xp_getargs)(struct __rpc_svcxprt *, xdrproc_t,
-				void *);
-	    /* send reply */
-	    bool_t	(*xp_reply)(struct __rpc_svcxprt *, struct rpc_msg *);
-	    /* free mem allocated for args */
-	    bool_t	(*xp_freeargs)(struct __rpc_svcxprt *, xdrproc_t,
-				void *);
-	    /* destroy this struct */
-	    void	(*xp_destroy)(struct __rpc_svcxprt *);
-	} *xp_ops;
-	int		xp_addrlen;	 /* length of remote address */
-	struct sockaddr_in xp_raddr;	 /* remote addr. (backward ABI compat) */
-	/* XXX - fvdl stick this here for ABI backward compat reasons */
-	const struct xp_ops2 {
-		/* catch-all function */
-		bool_t  (*xp_control)(struct __rpc_svcxprt *, const u_int,
-				void *);
-	} *xp_ops2;
-	char		*xp_tp;		 /* transport provider device name */
-	char		*xp_netid;	 /* network token */
-	struct netbuf	xp_ltaddr;	 /* local transport address */
-	struct netbuf	xp_rtaddr;	 /* remote transport address */
-	struct opaque_auth xp_verf;	 /* raw response verifier */
-	void		*xp_p1;		 /* private: for use by svc ops */
-	void		*xp_p2;		 /* private: for use by svc ops */
-	void		*xp_p3;		 /* private: for use by svc lib */
-	int		xp_type;	 /* transport type */
-} SVCXPRT;
-
-/*
- * Service request
- */
-struct svc_req {
-	u_int32_t	rq_prog;	/* service program number */
-	u_int32_t	rq_vers;	/* service protocol version */
-	u_int32_t	rq_proc;	/* the desired procedure */
-	struct opaque_auth rq_cred;	/* raw creds from the wire */
-	void		*rq_clntcred;	/* read only cooked cred */
-	SVCXPRT		*rq_xprt;	/* associated transport */
-};
-
-/*
- *  Approved way of getting address of caller
- */
-#define svc_getrpccaller(x) (&(x)->xp_rtaddr)
-
-/*
- * FreeBSD-only definition to get the creds of the caller (AF_LOCAL).
- */
-#define __svc_getcallercreds(x) ((struct cmsgcred *)(x)->xp_p2)
-
-/*
- * Operations defined on an SVCXPRT handle
- *
- * SVCXPRT		*xprt;
- * struct rpc_msg	*msg;
- * xdrproc_t		 xargs;
- * void *		 argsp;
- */
-#define SVC_RECV(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-#define svc_recv(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-
-#define SVC_STAT(xprt)					\
-	(*(xprt)->xp_ops->xp_stat)(xprt)
-#define svc_stat(xprt)					\
-	(*(xprt)->xp_ops->xp_stat)(xprt)
-
-#define SVC_GETARGS(xprt, xargs, argsp)			\
-	(*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-#define svc_getargs(xprt, xargs, argsp)			\
-	(*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-
-#define SVC_REPLY(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-#define svc_reply(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-
-#define SVC_FREEARGS(xprt, xargs, argsp)		\
-	(*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-#define svc_freeargs(xprt, xargs, argsp)		\
-	(*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-
-#define SVC_DESTROY(xprt)				\
-	(*(xprt)->xp_ops->xp_destroy)(xprt)
-#define svc_destroy(xprt)				\
-	(*(xprt)->xp_ops->xp_destroy)(xprt)
-
-#define SVC_CONTROL(xprt, rq, in)			\
-	(*(xprt)->xp_ops2->xp_control)((xprt), (rq), (in))
-
-/*
- * Service registration
- *
- * svc_reg(xprt, prog, vers, dispatch, nconf)
- *	const SVCXPRT *xprt;
- *	const rpcprog_t prog;
- *	const rpcvers_t vers;
- *	const void (*dispatch)();
- *	const struct netconfig *nconf;
- */
-
-__BEGIN_DECLS
-extern bool_t	svc_reg(SVCXPRT *, const rpcprog_t, const rpcvers_t,
-			void (*)(struct svc_req *, SVCXPRT *),
-			const struct netconfig *);
-__END_DECLS
-
-/*
- * Service un-registration
- *
- * svc_unreg(prog, vers)
- *	const rpcprog_t prog;
- *	const rpcvers_t vers;
- */
-
-__BEGIN_DECLS
-extern void	svc_unreg(const rpcprog_t, const rpcvers_t);
-__END_DECLS
-
-/*
- * Transport registration.
- *
- * xprt_register(xprt)
- *	SVCXPRT *xprt;
- */
-__BEGIN_DECLS
-extern void	xprt_register(SVCXPRT *);
-__END_DECLS
-
-/*
- * Transport un-register
- *
- * xprt_unregister(xprt)
- *	SVCXPRT *xprt;
- */
-__BEGIN_DECLS
-extern void	xprt_unregister(SVCXPRT *);
-__END_DECLS
-
-
-/*
- * When the service routine is called, it must first check to see if it
- * knows about the procedure;  if not, it should call svcerr_noproc
- * and return.  If so, it should deserialize its arguments via
- * SVC_GETARGS (defined above).  If the deserialization does not work,
- * svcerr_decode should be called followed by a return.  Successful
- * decoding of the arguments should be followed the execution of the
- * procedure's code and a call to svc_sendreply.
- *
- * Also, if the service refuses to execute the procedure due to too-
- * weak authentication parameters, svcerr_weakauth should be called.
- * Note: do not confuse access-control failure with weak authentication!
- *
- * NB: In pure implementations of rpc, the caller always waits for a reply
- * msg.  This message is sent when svc_sendreply is called.
- * Therefore pure service implementations should always call
- * svc_sendreply even if the function logically returns void;  use
- * xdr.h - xdr_void for the xdr routine.  HOWEVER, tcp based rpc allows
- * for the abuse of pure rpc via batched calling or pipelining.  In the
- * case of a batched call, svc_sendreply should NOT be called since
- * this would send a return message, which is what batching tries to avoid.
- * It is the service/protocol writer's responsibility to know which calls are
- * batched and which are not.  Warning: responding to batch calls may
- * deadlock the caller and server processes!
- */
-
-__BEGIN_DECLS
-extern bool_t	svc_sendreply(SVCXPRT *, xdrproc_t, void *);
-extern void	svcerr_decode(SVCXPRT *);
-extern void	svcerr_weakauth(SVCXPRT *);
-extern void	svcerr_noproc(SVCXPRT *);
-extern void	svcerr_progvers(SVCXPRT *, rpcvers_t, rpcvers_t);
-extern void	svcerr_auth(SVCXPRT *, enum auth_stat);
-extern void	svcerr_noprog(SVCXPRT *);
-extern void	svcerr_systemerr(SVCXPRT *);
-extern int	rpc_reg(rpcprog_t, rpcvers_t, rpcproc_t,
-			char *(*)(char *), xdrproc_t, xdrproc_t,
-			char *);
-__END_DECLS
-
-/*
- * Lowest level dispatching -OR- who owns this process anyway.
- * Somebody has to wait for incoming requests and then call the correct
- * service routine.  The routine svc_run does infinite waiting; i.e.,
- * svc_run never returns.
- * Since another (co-existant) package may wish to selectively wait for
- * incoming calls or other events outside of the rpc architecture, the
- * routine svc_getreq is provided.  It must be passed readfds, the
- * "in-place" results of a select system call (see select, section 2).
- */
-
-/*
- * Global keeper of rpc service descriptors in use
- * dynamic; must be inspected before each call to select
- */
-extern int svc_maxfd;
-#ifdef FD_SETSIZE
-extern fd_set svc_fdset;
-#define svc_fds svc_fdset.fds_bits[0]	/* compatibility */
-#else
-extern int svc_fds;
-#endif /* def FD_SETSIZE */
-
-/*
- * a small program implemented by the svc_rpc implementation itself;
- * also see clnt.h for protocol numbers.
- */
-__BEGIN_DECLS
-extern void rpctest_service(void);
-__END_DECLS
-
-__BEGIN_DECLS
-extern void	svc_getreq(int);
-extern void	svc_getreqset(fd_set *);
-extern void	svc_getreq_common(int);
-struct pollfd;
-extern void	svc_getreq_poll(struct pollfd *, int);
-
-extern void	svc_run(void);
-extern void	svc_exit(void);
-__END_DECLS
-
-/*
- * Socket to use on svcxxx_create call to get default socket
- */
-#define	RPC_ANYSOCK	-1
-#define RPC_ANYFD	RPC_ANYSOCK
-
-/*
- * These are the existing service side transport implementations
- */
-
-__BEGIN_DECLS
-/*
- * Transport independent svc_create routine.
- */
-extern int svc_create(void (*)(struct svc_req *, SVCXPRT *),
-			   const rpcprog_t, const rpcvers_t, const char *);
-/*
- *      void (*dispatch)();             -- dispatch routine
- *      const rpcprog_t prognum;        -- program number
- *      const rpcvers_t versnum;        -- version number
- *      const char *nettype;            -- network type
- */
-
-
-/*
- * Generic server creation routine. It takes a netconfig structure
- * instead of a nettype.
- */
-
-extern SVCXPRT *svc_tp_create(void (*)(struct svc_req *, SVCXPRT *),
-				   const rpcprog_t, const rpcvers_t,
-				   const struct netconfig *);
-        /*
-         * void (*dispatch)();            -- dispatch routine
-         * const rpcprog_t prognum;       -- program number
-         * const rpcvers_t versnum;       -- version number
-         * const struct netconfig *nconf; -- netconfig structure
-         */
-
-
-/*
- * Generic TLI create routine
- */
-extern SVCXPRT *svc_tli_create(const int, const struct netconfig *,
-			       const struct t_bind *, const u_int,
-			       const u_int);
-/*
- *      const int fd;                   -- connection end point
- *      const struct netconfig *nconf;  -- netconfig structure for network
- *      const struct t_bind *bindaddr;  -- local bind address
- *      const u_int sendsz;             -- max sendsize
- *      const u_int recvsz;             -- max recvsize
- */
-
-/*
- * Connectionless and connectionful create routines
- */
-
-extern SVCXPRT *svc_vc_create(const int, const u_int, const u_int);
-/*
- *      const int fd;                           -- open connection end point
- *      const u_int sendsize;                   -- max send size
- *      const u_int recvsize;                   -- max recv size
- */
-
-/*
- * Added for compatibility to old rpc 4.0. Obsoleted by svc_vc_create().
- */
-extern SVCXPRT *svcunix_create(int, u_int, u_int, char *);
-
-extern SVCXPRT *svc_dg_create(const int, const u_int, const u_int);
-        /*
-         * const int fd;                                -- open connection
-         * const u_int sendsize;                        -- max send size
-         * const u_int recvsize;                        -- max recv size
-         */
-
-
-/*
- * the routine takes any *open* connection
- * descriptor as its first input and is used for open connections.
- */
-extern SVCXPRT *svc_fd_create(const int, const u_int, const u_int);
-/*
- *      const int fd;                           -- open connection end point
- *      const u_int sendsize;                   -- max send size
- *      const u_int recvsize;                   -- max recv size
- */
-
-/*
- * Added for compatibility to old rpc 4.0. Obsoleted by svc_fd_create().
- */
-extern SVCXPRT *svcunixfd_create(int, u_int, u_int);
-
-/*
- * Memory based rpc (for speed check and testing)
- */
-extern SVCXPRT *svc_raw_create(void);
-
-/*
- * svc_dg_enable_cache() enables the cache on dg transports.
- */
-int svc_dg_enablecache(SVCXPRT *, const u_int);
-
-int __rpc_get_local_uid(SVCXPRT *_transp, uid_t *_uid);
-
-__END_DECLS
-
-
-/* for backward compatibility */
-#include <rpc/svc_soc.h>
-
-#endif /* !_RPC_SVC_H */
diff --git a/newlib/libc/sys/linux/include/rpc/svc_auth.h b/newlib/libc/sys/linux/include/rpc/svc_auth.h
deleted file mode 100644
index 366f752d9..000000000
--- a/newlib/libc/sys/linux/include/rpc/svc_auth.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*	$NetBSD: svc_auth.h,v 1.8 2000/06/02 22:57:57 fvdl Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)svc_auth.h 1.6 86/07/16 SMI
- *	@(#)svc_auth.h	2.1 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/svc_auth.h,v 1.14 2002/03/23 17:24:55 imp Exp $
- */
-
-/*
- * svc_auth.h, Service side of rpc authentication.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_AUTH_H
-#define _RPC_SVC_AUTH_H
-
-/*
- * Server side authenticator
- */
-__BEGIN_DECLS
-extern enum auth_stat _authenticate(struct svc_req *, struct rpc_msg *);
-extern int svc_auth_reg(int, enum auth_stat (*)(struct svc_req *,
-			  struct rpc_msg *));
-
-__END_DECLS
-
-#endif /* !_RPC_SVC_AUTH_H */
diff --git a/newlib/libc/sys/linux/include/rpc/svc_dg.h b/newlib/libc/sys/linux/include/rpc/svc_dg.h
deleted file mode 100644
index 67d25643b..000000000
--- a/newlib/libc/sys/linux/include/rpc/svc_dg.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*	$NetBSD: svc_dg.h,v 1.1 2000/06/02 23:11:16 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/svc_dg.h,v 1.1 2001/03/19 12:49:47 alfred Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * XXX - this file exists only so that the rpcbind code can pull it in.
- * This should go away. It should only be include by svc_dg.c and
- * rpcb_svc_com.c in the rpcbind code.
- */
-
-/*
- * kept in xprt->xp_p2
- */
-struct svc_dg_data {
-	/* XXX: optbuf should be the first field, used by ti_opts.c code */
-	size_t		su_iosz;		/* size of send.recv buffer */
-	u_int32_t	su_xid;			/* transaction id */
-	XDR		su_xdrs;			/* XDR handle */
-	char		su_verfbody[MAX_AUTH_BYTES];	/* verifier body */
-	void		*su_cache;		/* cached data, NULL if none */
-};
-
-#define __rpcb_get_dg_xidp(x)	(&((struct svc_dg_data *)(x)->xp_p2)->su_xid)
diff --git a/newlib/libc/sys/linux/include/rpc/svc_soc.h b/newlib/libc/sys/linux/include/rpc/svc_soc.h
deleted file mode 100644
index ceb4392c7..000000000
--- a/newlib/libc/sys/linux/include/rpc/svc_soc.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*	$NetBSD: svc_soc.h,v 1.1 2000/06/02 22:57:57 fvdl Exp $	*/
-/*	$FreeBSD: src/include/rpc/svc_soc.h,v 1.2 2002/03/23 17:24:55 imp Exp $ */
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1986 - 1991 by Sun Microsystems, Inc.
- */
-
-/*
- * svc.h, Server-side remote procedure call interface.
- */
-
-#ifndef _RPC_SVC_SOC_H
-#define _RPC_SVC_SOC_H
-#include <sys/cdefs.h>
-
-/* #pragma ident   "@(#)svc_soc.h  1.11    94/04/25 SMI" */
-/*      svc_soc.h 1.8 89/05/01 SMI      */
-
-/*
- * All the following declarations are only for backward compatibility
- * with TS-RPC
- */
-
-/*
- *  Approved way of getting address of caller
- */
-#define svc_getcaller(x) (&(x)->xp_raddr)
-
-/*
- * Service registration
- *
- * svc_register(xprt, prog, vers, dispatch, protocol)
- *	SVCXPRT *xprt;
- *	u_long prog;
- *	u_long vers;
- *	void (*dispatch)();
- *	int protocol;    like TCP or UDP, zero means do not register 
- */
-__BEGIN_DECLS
-extern bool_t	svc_register(SVCXPRT *, u_long, u_long,
-		    void (*)(struct svc_req *, SVCXPRT *), int);
-__END_DECLS
-
-/*
- * Service un-registration
- *
- * svc_unregister(prog, vers)
- *	u_long prog;
- *	u_long vers;
- */
-__BEGIN_DECLS
-extern void	svc_unregister(u_long, u_long);
-__END_DECLS
-
-
-/*
- * Memory based rpc for testing and timing.
- */
-__BEGIN_DECLS
-extern SVCXPRT *svcraw_create(void);
-__END_DECLS
-
-
-/*
- * Udp based rpc.
- */
-__BEGIN_DECLS
-extern SVCXPRT *svcudp_create(int);
-extern SVCXPRT *svcudp_bufcreate(int, u_int, u_int);
-extern int svcudp_enablecache(SVCXPRT *, u_long);
-__END_DECLS
-
-
-/*
- * Tcp based rpc.
- */
-__BEGIN_DECLS
-extern SVCXPRT *svctcp_create(int, u_int, u_int);
-__END_DECLS
-
-/*
- * Fd based rpc.
- */
-__BEGIN_DECLS
-extern SVCXPRT *svcfd_create(int, u_int, u_int);
-__END_DECLS
-
-#endif /* !_RPC_SVC_SOC_H */
diff --git a/newlib/libc/sys/linux/include/rpc/types.h b/newlib/libc/sys/linux/include/rpc/types.h
deleted file mode 100644
index 259127c00..000000000
--- a/newlib/libc/sys/linux/include/rpc/types.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*	$NetBSD: types.h,v 1.13 2000/06/13 01:02:44 thorpej Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)types.h 1.18 87/07/24 SMI
- *	from: @(#)types.h	2.3 88/08/15 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/types.h,v 1.10 2001/03/19 12:49:47 alfred Exp $
- */
-
-/*
- * Rpc additions to <sys/types.h>
- */
-#ifndef _RPC_TYPES_H
-#define _RPC_TYPES_H
-
-#include <sys/types.h>
-
-typedef int32_t bool_t;
-typedef int32_t enum_t;
-
-typedef u_int32_t rpcprog_t;
-typedef u_int32_t rpcvers_t;
-typedef u_int32_t rpcproc_t;
-typedef u_int32_t rpcprot_t;
-typedef u_int32_t rpcport_t;
-typedef   int32_t rpc_inline_t;
-
-#define __dontcare__	-1
-
-#ifndef FALSE
-#	define FALSE	(0)
-#endif
-#ifndef TRUE
-#	define TRUE	(1)
-#endif
-#ifndef NULL
-#	define NULL	0
-#endif
-
-#define mem_alloc(bsize)	calloc(1, bsize)
-#define mem_free(ptr, bsize)	free(ptr)
-
-#include <sys/time.h>
-#include <netconfig.h>
-
-/*
- * The netbuf structure is defined here, because FreeBSD / NetBSD only use
- * it inside the RPC code. It's in <xti.h> on SVR4, but it would be confusing
- * to have an xti.h, since FreeBSD / NetBSD does not support XTI/TLI.
- */
-
-/*
- * The netbuf structure is used for transport-independent address storage.
- */
-struct netbuf {
-	unsigned int maxlen;
-	unsigned int len;
-	void *buf;
-};
-
-/*
- * The format of the addres and options arguments of the XTI t_bind call.
- * Only provided for compatibility, it should not be used.
- */
-
-struct t_bind {
-	struct netbuf   addr;
-	unsigned int    qlen;
-};
-
-/*
- * Internal library and rpcbind use. This is not an exported interface, do
- * not use.
- */
-struct __rpc_sockinfo {
-	int si_af; 
-	int si_proto;
-	int si_socktype;
-	int si_alen;
-};
-
-#endif /* !_RPC_TYPES_H */
diff --git a/newlib/libc/sys/linux/include/rpc/xdr.h b/newlib/libc/sys/linux/include/rpc/xdr.h
deleted file mode 100644
index 678dbe417..000000000
--- a/newlib/libc/sys/linux/include/rpc/xdr.h
+++ /dev/null
@@ -1,365 +0,0 @@
-/*	$NetBSD: xdr.h,v 1.19 2000/07/17 05:00:45 matt Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- *
- *	from: @(#)xdr.h 1.19 87/04/22 SMI
- *	from: @(#)xdr.h	2.2 88/07/29 4.0 RPCSRC
- * $FreeBSD: src/include/rpc/xdr.h,v 1.21 2002/04/28 15:18:45 des Exp $
- */
-
-/*
- * xdr.h, External Data Representation Serialization Routines.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_XDR_H
-#define _RPC_XDR_H
-#include <sys/cdefs.h>
-
-/*
- * XDR provides a conventional way for converting between C data
- * types and an external bit-string representation.  Library supplied
- * routines provide for the conversion on built-in C data types.  These
- * routines and utility routines defined here are used to help implement
- * a type encode/decode routine for each user-defined type.
- *
- * Each data type provides a single procedure which takes two arguments:
- *
- *	bool_t
- *	xdrproc(xdrs, argresp)
- *		XDR *xdrs;
- *		<type> *argresp;
- *
- * xdrs is an instance of a XDR handle, to which or from which the data
- * type is to be converted.  argresp is a pointer to the structure to be
- * converted.  The XDR handle contains an operation field which indicates
- * which of the operations (ENCODE, DECODE * or FREE) is to be performed.
- *
- * XDR_DECODE may allocate space if the pointer argresp is null.  This
- * data can be freed with the XDR_FREE operation.
- *
- * We write only one procedure per data type to make it easy
- * to keep the encode and decode procedures for a data type consistent.
- * In many cases the same code performs all operations on a user defined type,
- * because all the hard work is done in the component type routines.
- * decode as a series of calls on the nested data types.
- */
-
-/*
- * Xdr operations.  XDR_ENCODE causes the type to be encoded into the
- * stream.  XDR_DECODE causes the type to be extracted from the stream.
- * XDR_FREE can be used to release the space allocated by an XDR_DECODE
- * request.
- */
-enum xdr_op {
-	XDR_ENCODE=0,
-	XDR_DECODE=1,
-	XDR_FREE=2
-};
-
-/*
- * This is the number of bytes per unit of external data.
- */
-#define BYTES_PER_XDR_UNIT	(4)
-#define RNDUP(x)  ((((x) + BYTES_PER_XDR_UNIT - 1) / BYTES_PER_XDR_UNIT) \
-		    * BYTES_PER_XDR_UNIT)
-
-/*
- * The XDR handle.
- * Contains operation which is being applied to the stream,
- * an operations vector for the particular implementation (e.g. see xdr_mem.c),
- * and two private fields for the use of the particular implementation.
- */
-typedef struct __rpc_xdr {
-	enum xdr_op	x_op;		/* operation; fast additional param */
-	const struct xdr_ops {
-		/* get a long from underlying stream */
-		bool_t	(*x_getlong)(struct __rpc_xdr *, long *);
-		/* put a long to " */
-		bool_t	(*x_putlong)(struct __rpc_xdr *, const long *);
-		/* get some bytes from " */
-		bool_t	(*x_getbytes)(struct __rpc_xdr *, char *, u_int);
-		/* put some bytes to " */
-		bool_t	(*x_putbytes)(struct __rpc_xdr *, const char *, u_int);
-		/* returns bytes off from beginning */
-		u_int	(*x_getpostn)(struct __rpc_xdr *);
-		/* lets you reposition the stream */
-		bool_t  (*x_setpostn)(struct __rpc_xdr *, u_int);
-		/* buf quick ptr to buffered data */
-		int32_t *(*x_inline)(struct __rpc_xdr *, u_int);
-		/* free privates of this xdr_stream */
-		void	(*x_destroy)(struct __rpc_xdr *);
-		bool_t	(*x_control)(struct __rpc_xdr *, int, void *);
-	} *x_ops;
-	char *	 	x_public;	/* users' data */
-	void *		x_private;	/* pointer to private data */
-	char * 		x_base;		/* private used for position info */
-	int		x_handy;	/* extra private word */
-} XDR;
-
-/*
- * A xdrproc_t exists for each data type which is to be encoded or decoded.
- *
- * The second argument to the xdrproc_t is a pointer to an opaque pointer.
- * The opaque pointer generally points to a structure of the data type
- * to be decoded.  If this pointer is 0, then the type routines should
- * allocate dynamic storage of the appropriate size and return it.
- */
-#ifdef _KERNEL
-typedef	bool_t (*xdrproc_t)(XDR *, void *, u_int);
-#else
-/*
- * XXX can't actually prototype it, because some take three args!!!
- */
-typedef	bool_t (*xdrproc_t)(XDR *, ...);
-#endif
-
-/*
- * Operations defined on a XDR handle
- *
- * XDR		*xdrs;
- * long		*longp;
- * char *	 addr;
- * u_int	 len;
- * u_int	 pos;
- */
-#define XDR_GETLONG(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-#define xdr_getlong(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-
-#define XDR_PUTLONG(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-#define xdr_putlong(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-
-static __inline int
-xdr_getint32(XDR *xdrs, int32_t *ip)
-{
-	long l;
-
-	if (!xdr_getlong(xdrs, &l))
-		return (FALSE);
-	*ip = (int32_t)l;
-	return (TRUE);
-}
-
-static __inline int
-xdr_putint32(XDR *xdrs, int32_t *ip)
-{
-	long l;
-
-	l = (long)*ip;
-	return xdr_putlong(xdrs, &l);
-}
-
-#define XDR_GETINT32(xdrs, int32p)	xdr_getint32(xdrs, int32p)
-#define XDR_PUTINT32(xdrs, int32p)	xdr_putint32(xdrs, int32p)
-
-#define XDR_GETBYTES(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-#define xdr_getbytes(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-
-#define XDR_PUTBYTES(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-#define xdr_putbytes(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-
-#define XDR_GETPOS(xdrs)				\
-	(*(xdrs)->x_ops->x_getpostn)(xdrs)
-#define xdr_getpos(xdrs)				\
-	(*(xdrs)->x_ops->x_getpostn)(xdrs)
-
-#define XDR_SETPOS(xdrs, pos)				\
-	(*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-#define xdr_setpos(xdrs, pos)				\
-	(*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-
-#define	XDR_INLINE(xdrs, len)				\
-	(*(xdrs)->x_ops->x_inline)(xdrs, len)
-#define	xdr_inline(xdrs, len)				\
-	(*(xdrs)->x_ops->x_inline)(xdrs, len)
-
-#define	XDR_DESTROY(xdrs)				\
-	if ((xdrs)->x_ops->x_destroy) 			\
-		(*(xdrs)->x_ops->x_destroy)(xdrs)
-#define	xdr_destroy(xdrs)				\
-	if ((xdrs)->x_ops->x_destroy) 			\
-		(*(xdrs)->x_ops->x_destroy)(xdrs)
-
-#define XDR_CONTROL(xdrs, req, op)			\
-	if ((xdrs)->x_ops->x_control)			\
-		(*(xdrs)->x_ops->x_control)(xdrs, req, op)
-#define xdr_control(xdrs, req, op) XDR_CONTROL(xdrs, req, op)
-
-/*
- * Solaris strips the '_t' from these types -- not sure why.
- * But, let's be compatible.
- */
-#define xdr_rpcvers(xdrs, versp) xdr_u_int32(xdrs, versp)
-#define xdr_rpcprog(xdrs, progp) xdr_u_int32(xdrs, progp)
-#define xdr_rpcproc(xdrs, procp) xdr_u_int32(xdrs, procp)
-#define xdr_rpcprot(xdrs, protp) xdr_u_int32(xdrs, protp)
-#define xdr_rpcport(xdrs, portp) xdr_u_int32(xdrs, portp)
-
-/*
- * Support struct for discriminated unions.
- * You create an array of xdrdiscrim structures, terminated with
- * a entry with a null procedure pointer.  The xdr_union routine gets
- * the discriminant value and then searches the array of structures
- * for a matching value.  If a match is found the associated xdr routine
- * is called to handle that part of the union.  If there is
- * no match, then a default routine may be called.
- * If there is no match and no default routine it is an error.
- */
-#define NULL_xdrproc_t ((xdrproc_t)0)
-struct xdr_discrim {
-	int	value;
-	xdrproc_t proc;
-};
-
-/*
- * In-line routines for fast encode/decode of primitive data types.
- * Caveat emptor: these use single memory cycles to get the
- * data from the underlying buffer, and will fail to operate
- * properly if the data is not aligned.  The standard way to use these
- * is to say:
- *	if ((buf = XDR_INLINE(xdrs, count)) == NULL)
- *		return (FALSE);
- *	<<< macro calls >>>
- * where ``count'' is the number of bytes of data occupied
- * by the primitive data types.
- *
- * N.B. and frozen for all time: each data type here uses 4 bytes
- * of external representation.
- */
-#define IXDR_GET_INT32(buf)		((int32_t)__ntohl((u_int32_t)*(buf)++))
-#define IXDR_PUT_INT32(buf, v)		(*(buf)++ =(int32_t)__htonl((u_int32_t)v))
-#define IXDR_GET_U_INT32(buf)		((u_int32_t)IXDR_GET_INT32(buf))
-#define IXDR_PUT_U_INT32(buf, v)	IXDR_PUT_INT32((buf), ((int32_t)(v)))
-
-#define IXDR_GET_LONG(buf)		((long)__ntohl((u_int32_t)*(buf)++))
-#define IXDR_PUT_LONG(buf, v)		(*(buf)++ =(int32_t)__htonl((u_int32_t)v))
-
-#define IXDR_GET_BOOL(buf)		((bool_t)IXDR_GET_LONG(buf))
-#define IXDR_GET_ENUM(buf, t)		((t)IXDR_GET_LONG(buf))
-#define IXDR_GET_U_LONG(buf)		((u_long)IXDR_GET_LONG(buf))
-#define IXDR_GET_SHORT(buf)		((short)IXDR_GET_LONG(buf))
-#define IXDR_GET_U_SHORT(buf)		((u_short)IXDR_GET_LONG(buf))
-
-#define IXDR_PUT_BOOL(buf, v)		IXDR_PUT_LONG((buf), (v))
-#define IXDR_PUT_ENUM(buf, v)		IXDR_PUT_LONG((buf), (v))
-#define IXDR_PUT_U_LONG(buf, v)		IXDR_PUT_LONG((buf), (v))
-#define IXDR_PUT_SHORT(buf, v)		IXDR_PUT_LONG((buf), (v))
-#define IXDR_PUT_U_SHORT(buf, v)	IXDR_PUT_LONG((buf), (v))
-
-/*
- * These are the "generic" xdr routines.
- */
-__BEGIN_DECLS
-extern bool_t	xdr_void(void);
-extern bool_t	xdr_int(XDR *, int *);
-extern bool_t	xdr_u_int(XDR *, u_int *);
-extern bool_t	xdr_long(XDR *, long *);
-extern bool_t	xdr_u_long(XDR *, u_long *);
-extern bool_t	xdr_short(XDR *, short *);
-extern bool_t	xdr_u_short(XDR *, u_short *);
-extern bool_t	xdr_int16_t(XDR *, int16_t *);
-extern bool_t	xdr_u_int16_t(XDR *, u_int16_t *);
-extern bool_t	xdr_int32_t(XDR *, int32_t *);
-extern bool_t	xdr_u_int32_t(XDR *, u_int32_t *);
-extern bool_t	xdr_int64_t(XDR *, int64_t *);
-extern bool_t	xdr_u_int64_t(XDR *, u_int64_t *);
-extern bool_t	xdr_bool(XDR *, bool_t *);
-extern bool_t	xdr_enum(XDR *, enum_t *);
-extern bool_t	xdr_array(XDR *, char **, u_int *, u_int, u_int, xdrproc_t);
-extern bool_t	xdr_bytes(XDR *, char **, u_int *, u_int);
-extern bool_t	xdr_opaque(XDR *, char *, u_int);
-extern bool_t	xdr_string(XDR *, char **, u_int);
-extern bool_t	xdr_union(XDR *, enum_t *, char *, const struct xdr_discrim *, xdrproc_t);
-extern bool_t	xdr_char(XDR *, char *);
-extern bool_t	xdr_u_char(XDR *, u_char *);
-extern bool_t	xdr_vector(XDR *, char *, u_int, u_int, xdrproc_t);
-extern bool_t	xdr_float(XDR *, float *);
-extern bool_t	xdr_double(XDR *, double *);
-extern bool_t	xdr_quadruple(XDR *, long double *);
-extern bool_t	xdr_reference(XDR *, char **, u_int, xdrproc_t);
-extern bool_t	xdr_pointer(XDR *, char **, u_int, xdrproc_t);
-extern bool_t	xdr_wrapstring(XDR *, char **);
-extern void	xdr_free(xdrproc_t, void *);
-extern bool_t	xdr_hyper(XDR *, long long *);
-extern bool_t	xdr_u_hyper(XDR *, unsigned long long *);
-extern bool_t	xdr_longlong_t(XDR *, long long *);
-extern bool_t	xdr_u_longlong_t(XDR *, unsigned long long *);
-__END_DECLS
-
-/*
- * Common opaque bytes objects used by many rpc protocols;
- * declared here due to commonality.
- */
-#define MAX_NETOBJ_SZ 1024
-struct netobj {
-	u_int	n_len;
-	char	*n_bytes;
-};
-typedef struct netobj netobj;
-extern bool_t   xdr_netobj(XDR *, struct netobj *);
-
-/*
- * These are the public routines for the various implementations of
- * xdr streams.
- */
-__BEGIN_DECLS
-/* XDR using memory buffers */
-extern void   xdrmem_create(XDR *, char *, u_int, enum xdr_op);
-
-/* XDR using stdio library */
-#ifdef _STDIO_H_
-extern void   xdrstdio_create(XDR *, FILE *, enum xdr_op);
-#endif
-
-/* XDR pseudo records for tcp */
-extern void   xdrrec_create(XDR *, u_int, u_int, void *,
-			    int (*)(void *, void *, int),
-			    int (*)(void *, void *, int));
-
-/* make end of xdr record */
-extern bool_t xdrrec_endofrecord(XDR *, int);
-
-/* move to beginning of next record */
-extern bool_t xdrrec_skiprecord(XDR *);
-
-/* true if no more input */
-extern bool_t xdrrec_eof(XDR *);
-extern u_int xdrrec_readbytes(XDR *, caddr_t, u_int);
-__END_DECLS
-
-#endif /* !_RPC_XDR_H */
diff --git a/newlib/libc/sys/linux/include/rune.h b/newlib/libc/sys/linux/include/rune.h
deleted file mode 100644
index d8aa03dda..000000000
--- a/newlib/libc/sys/linux/include/rune.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*-
- * Copyright (c) 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Paul Borman at Krystal Technologies.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)rune.h	8.1 (Berkeley) 6/27/93
- * $FreeBSD: src/include/rune.h,v 1.2 2002/03/23 17:24:53 imp Exp $
- */
-
-#ifndef	_RUNE_H_
-#define	_RUNE_H_
-
-#include <runetype.h>
-#include <stdio.h>
-
-#define	_PATH_LOCALE	"/usr/share/locale"
-
-#define _INVALID_RUNE   _CurrentRuneLocale->invalid_rune
-
-#define __sgetrune      _CurrentRuneLocale->sgetrune
-#define __sputrune      _CurrentRuneLocale->sputrune
-
-#define sgetrune(s, n, r)       (*__sgetrune)((s), (n), (r))
-#define sputrune(c, s, n, r)    (*__sputrune)((c), (s), (n), (r))
-
-__BEGIN_DECLS
-char	*mbrune(const char *, rune_t);
-char	*mbrrune(const char *, rune_t);
-char	*mbmb(const char *, char *);
-long	 fgetrune(FILE *);
-int	 fputrune(rune_t, FILE *);
-int	 fungetrune(rune_t, FILE *);
-int	 setrunelocale(char *);
-void	 setinvalidrune(rune_t);
-__END_DECLS
-
-#endif	/*! _RUNE_H_ */
diff --git a/newlib/libc/sys/linux/include/runetype.h b/newlib/libc/sys/linux/include/runetype.h
deleted file mode 100644
index a0a3a4316..000000000
--- a/newlib/libc/sys/linux/include/runetype.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*-
- * Copyright (c) 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Paul Borman at Krystal Technologies.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)runetype.h	8.1 (Berkeley) 6/2/93
- * $FreeBSD: src/include/runetype.h,v 1.5 2002/03/26 01:35:05 bde Exp $
- */
-
-#ifndef	_RUNETYPE_H_
-#define	_RUNETYPE_H_
-
-#include <sys/cdefs.h>
-#include <machine/ansi.h>
-
-#ifdef	_BSD_RUNE_T_
-typedef	_BSD_RUNE_T_	rune_t;
-#undef	_BSD_RUNE_T_
-#endif
-
-typedef int rune_t;
-
-#ifdef	_BSD_SIZE_T_
-typedef	_BSD_SIZE_T_	size_t;
-#undef	_BSD_SIZE_T_
-#endif
-
-typedef unsigned int size_t;
-
-#ifdef	_BSD_WCHAR_T_
-typedef	_BSD_WCHAR_T_	wchar_t;
-#undef	_BSD_WCHAR_T_
-#endif
-
-#define	_CACHED_RUNES	(1 <<8 )	/* Must be a power of 2 */
-#define	_CRMASK		(~(_CACHED_RUNES - 1))
-
-/*
- * The lower 8 bits of runetype[] contain the digit value of the rune.
- */
-typedef struct {
-	rune_t		min;		/* First rune of the range */
-	rune_t		max;		/* Last rune (inclusive) of the range */
-	rune_t		map;		/* What first maps to in maps */
-	unsigned long	*types;		/* Array of types in range */
-} _RuneEntry;
-
-typedef struct {
-	int		nranges;	/* Number of ranges stored */
-	_RuneEntry	*ranges;	/* Pointer to the ranges */
-} _RuneRange;
-
-typedef struct {
-	char		magic[8];	/* Magic saying what version we are */
-	char		encoding[32];	/* ASCII name of this encoding */
-
-	rune_t		(*sgetrune)(const char *, size_t, char const **);
-	int		(*sputrune)(rune_t, char *, size_t, char **);
-	rune_t		invalid_rune;
-
-	unsigned long	runetype[_CACHED_RUNES];
-	rune_t		maplower[_CACHED_RUNES];
-	rune_t		mapupper[_CACHED_RUNES];
-
-	/*
-	 * The following are to deal with Runes larger than _CACHED_RUNES - 1.
-	 * Their data is actually contiguous with this structure so as to make
-	 * it easier to read/write from/to disk.
-	 */
-	_RuneRange	runetype_ext;
-	_RuneRange	maplower_ext;
-	_RuneRange	mapupper_ext;
-
-	void		*variable;	/* Data which depends on the encoding */
-	int		variable_len;	/* how long that data is */
-} _RuneLocale;
-
-#define	_RUNE_MAGIC_1	"RuneMagi"	/* Indicates version 0 of RuneLocale */
-
-extern _RuneLocale _DefaultRuneLocale;
-extern _RuneLocale *_CurrentRuneLocale;
-
-#endif	/* !_RUNETYPE_H_ */
diff --git a/newlib/libc/sys/linux/include/semaphore.h b/newlib/libc/sys/linux/include/semaphore.h
deleted file mode 100644
index 8793768a8..000000000
--- a/newlib/libc/sys/linux/include/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linuxthreads/semaphore.h>
diff --git a/newlib/libc/sys/linux/include/setjmp.h b/newlib/libc/sys/linux/include/setjmp.h
deleted file mode 100644
index f07dbab6d..000000000
--- a/newlib/libc/sys/linux/include/setjmp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
-	setjmp.h
-	stubs for future use.
-*/
-
-#ifndef _SETJMP_H_
-#ifdef __cplusplus
-extern "C" {
-#endif
-#define _SETJMP_H_
-
-#include "_ansi.h"
-#include <machine/setjmp.h>
-#include <signal.h> /* for sigset_t and sigprocmask */
-
-typedef struct __sigjmpbuf
-{
-  __jmp_buf __buf;
-  int __is_mask_saved;
-  sigset_t __saved_mask;
-} sigjmp_buf;
-
-typedef __jmp_buf jmp_buf;
-
-void	_EXFUN(longjmp,(jmp_buf __jmpb, int __retval));
-int	_EXFUN(setjmp,(jmp_buf __jmpb));
-void	_EXFUN(siglongjmp,(sigjmp_buf __jmpb, int __retval));
-int	_EXFUN(sigsetjmp,(sigjmp_buf __jmpb, int __savemask));
-
-/* sigsetjmp is implemented as macro using setjmp */
-
-#define sigsetjmp(__jmpb, __savemask) \
-                 ( __jmpb.__is_mask_saved = __savemask && \
-                   (sigprocmask (SIG_BLOCK, NULL, &__jmpb.__saved_mask) == 0), \
-                    setjmp (__jmpb.__buf) )
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SETJMP_H_ */
-
diff --git a/newlib/libc/sys/linux/include/setlocale.h b/newlib/libc/sys/linux/include/setlocale.h
deleted file mode 100644
index 3eb769863..000000000
--- a/newlib/libc/sys/linux/include/setlocale.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*-
- * Copyright (C) 1997 by Andrey A. Chernov, Moscow, Russia.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/setlocale.h,v 1.4 2001/12/20 18:28:52 phantom Exp $
- */
-
-#ifndef _SETLOCALE_H_
-#define	_SETLOCALE_H_
-
-#define ENCODING_LEN 31
-#define CATEGORY_LEN 11
-
-extern char *_PathLocale;
-
-#endif /* !_SETLOCALE_H_ */
diff --git a/newlib/libc/sys/linux/include/stdint.h b/newlib/libc/sys/linux/include/stdint.h
deleted file mode 100644
index 5c89acd22..000000000
--- a/newlib/libc/sys/linux/include/stdint.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* libc/sys/linux/include/stdint.h - Standard integer types */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _NEWLIB_STDINT_H
-#define _NEWLIB_STDINT_H
-
-/*
- * FIXME: linux/types.h defines various types that rightfully belong into
- * stdint.h. So we have no choice but to include linux/types.h directly, even
- * if this causes name space pollution. Note: we have to go via sys/types.h
- * in order to resolve some other compatibility issues.
- */
-
-#include <sys/types.h>
-
-#endif
diff --git a/newlib/libc/sys/linux/include/time.h b/newlib/libc/sys/linux/include/time.h
deleted file mode 100644
index 8b4b28460..000000000
--- a/newlib/libc/sys/linux/include/time.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * time.h
- * 
- * Struct and function declarations for dealing with time.
- */
-
-#ifndef _TIME_H_
-
-#include "_ansi.h"
-#include <sys/reent.h>
-#include <sys/linux_time.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-/* Get _CLOCKS_PER_SEC_ */
-#include <machine/time.h>
-#include <sys/types.h>
-
-/* Time Value Specification Structures, P1003.1b-1993, p. 261 */
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-  time_t  tv_sec;   /* Seconds */
-  long    tv_nsec;  /* Nanoseconds */
-};
-#endif /* !_STRUCT_TIMESPEC */
-
-#ifndef __need_timespec
-
-#define _TIME_H_ 1
-
-#ifndef _CLOCKS_PER_SEC_
-#define _CLOCKS_PER_SEC_ 1000
-#endif
-
-#define CLOCKS_PER_SEC _CLOCKS_PER_SEC_
-#define CLK_TCK CLOCKS_PER_SEC
-#define __need_size_t
-#include <stddef.h>
-
-struct tm
-{
-  int	tm_sec;
-  int	tm_min;
-  int	tm_hour;
-  int	tm_mday;
-  int	tm_mon;
-  int	tm_year;
-  int	tm_wday;
-  int	tm_yday;
-  int	tm_isdst;
-};
-
-#ifndef __timer_t_defined
-# define __timer_t_defined      1
-typedef __timer_t timer_t;
-#endif
-
-clock_t	   _EXFUN(clock,    (void));
-double	   _EXFUN(difftime, (time_t _time2, time_t _time1));
-time_t	   _EXFUN(mktime,   (struct tm *_timeptr));
-time_t	   _EXFUN(time,     (time_t *_timer));
-#ifndef _REENT_ONLY
-char	  *_EXFUN(asctime,  (const struct tm *_tblock));
-char	  *_EXFUN(ctime,    (const time_t *_time));
-struct tm *_EXFUN(gmtime,   (const time_t *_timer));
-struct tm *_EXFUN(localtime,(const time_t *_timer));
-#endif
-size_t	   _EXFUN(strftime, (char *_s, size_t _maxsize, const char *_fmt, const struct tm *_t));
-
-char	  *_EXFUN(asctime_r,	(const struct tm *, char *));
-char	  *_EXFUN(ctime_r,	(const time_t *, char *));
-struct tm *_EXFUN(gmtime_r,	(const time_t *, struct tm *));
-struct tm *_EXFUN(localtime_r,	(const time_t *, struct tm *));
-
-#ifndef __STRICT_ANSI__
-char      *_EXFUN(strptime,     (const char *, const char *, struct tm *));
-_VOID      _EXFUN(tzset,	(_VOID));
-_VOID      _EXFUN(_tzset_r,	(struct _reent *));
-
-/* getdate functions */
-
-#ifndef _REENT_ONLY
-#define getdate_err (*__getdate_err())
-int *_EXFUN(__getdate_err,(_VOID));
-
-struct tm *	_EXFUN(getdate, (const char *));
-/* getdate_err is set to one of the following values to indicate the error.
-     1  the DATEMSK environment variable is null or undefined,
-     2  the template file cannot be opened for reading,
-     3  failed to get file status information,
-     4  the template file is not a regular file,
-     5  an error is encountered while reading the template file,
-     6  memory allication failed (not enough memory available),
-     7  there is no line in the template that matches the input,
-     8  invalid input specification  */
-#endif /* !_REENT_ONLY */
-
-/* getdate_r returns the error code as above */
-int		_EXFUN(getdate_r, (const char *, struct tm *));
-
-/* defines for the opengroup specifications Derived from Issue 1 of the SVID.  */
-extern __IMPORT time_t _timezone;
-extern __IMPORT int _daylight;
-extern __IMPORT char *_tzname[2];
-
-/* POSIX defines the external tzname being defined in time.h */
-#ifndef tzname
-#define tzname _tzname
-#endif
-
-#endif /* !__STRICT_ANSI__ */
-
-#include <sys/features.h>
-
-#if defined(_POSIX_TIMERS)
-
-#include <signal.h>
-
-/* Clocks, P1003.1b-1993, p. 263 */
-
-int _EXFUN(clock_settime, (clockid_t clock_id, const struct timespec *tp));
-int _EXFUN(clock_gettime, (clockid_t clock_id, struct timespec *tp));
-int _EXFUN(clock_getres,  (clockid_t clock_id, struct timespec *res));
-
-/* Create a Per-Process Timer, P1003.1b-1993, p. 264 */
-
-int _EXFUN(timer_create,
-  (clockid_t clock_id, struct sigevent *evp, timer_t *timerid));
-
-/* Delete a Per_process Timer, P1003.1b-1993, p. 266 */
-
-int _EXFUN(timer_delete, (timer_t timerid));
-
-/* Per-Process Timers, P1003.1b-1993, p. 267 */
-
-int _EXFUN(timer_settime,
-  (timer_t timerid, int flags, const struct itimerspec *value,
-   struct itimerspec *ovalue));
-int _EXFUN(timer_gettime, (timer_t timerid, struct itimerspec *value));
-int _EXFUN(timer_getoverrun, (timer_t timerid));
-
-/* High Resolution Sleep, P1003.1b-1993, p. 269 */
-
-int _EXFUN(nanosleep, (const struct timespec  *rqtp, struct timespec *rmtp));
-
-#endif /* _POSIX_TIMERS */
-
-/* CPU-time Clock Attributes, P1003.4b/D8, p. 54 */
-
-/* values for the clock enable attribute */
-
-#define CLOCK_ENABLED  1  /* clock is enabled, i.e. counting execution time */
-#define CLOCK_DISABLED 0  /* clock is disabled */
-
-/* values for the pthread cputime_clock_allowed attribute */
-
-#define CLOCK_ALLOWED    1 /* If a thread is created with this value a */
-                           /*   CPU-time clock attached to that thread */
-                           /*   shall be accessible. */
-#define CLOCK_DISALLOWED 0 /* If a thread is created with this value, the */
-                           /*   thread shall not have a CPU-time clock */
-                           /*   accessible. */
-
-/* Manifest Constants, P1003.1b-1993, p. 262 */
-
-#define CLOCK_REALTIME (clockid_t)1
-
-/* Flag indicating time is "absolute" with respect to the clock
-   associated with a time.  */
-
-#define TIMER_ABSTIME  4
-
-/* Manifest Constants, P1003.4b/D8, p. 55 */
-
-#if defined(_POSIX_CPUTIME)
-
-/* When used in a clock or timer function call, this is interpreted as
-   the identifier of the CPU_time clock associated with the PROCESS
-   making the function call.  */
-
-#define CLOCK_PROCESS_CPUTIME_ID (clockid_t)2
-
-#endif
-
-#if defined(_POSIX_THREAD_CPUTIME)
-
-/*  When used in a clock or timer function call, this is interpreted as
-    the identifier of the CPU_time clock associated with the THREAD
-    making the function call.  */
-
-#define CLOCK_THREAD_CPUTIME_ID (clockid_t)3
-
-#endif
-
-#if defined(_POSIX_CPUTIME)
-
-/* Accessing a Process CPU-time CLock, P1003.4b/D8, p. 55 */
-
-int _EXFUN(clock_getcpuclockid, (pid_t pid, clockid_t *clock_id));
-
-#endif /* _POSIX_CPUTIME */
-
-#if defined(_POSIX_CPUTIME) || defined(_POSIX_THREAD_CPUTIME)
-
-/* CPU-time Clock Attribute Access, P1003.4b/D8, p. 56 */
-
-int _EXFUN(clock_setenable_attr, (clockid_t clock_id, int attr));
-int _EXFUN(clock_getenable_attr, (clockid_t clock_id, int *attr));
-
-#endif /* _POSIX_CPUTIME or _POSIX_THREAD_CPUTIME */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ! __need_timespec */
-
-#undef __need_timespec
-
-#endif /* _TIME_H_ */
-
diff --git a/newlib/libc/sys/linux/include/un-namespace.h b/newlib/libc/sys/linux/include/un-namespace.h
deleted file mode 100644
index 01d9b8fa0..000000000
--- a/newlib/libc/sys/linux/include/un-namespace.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/include/un-namespace.h,v 1.7 2002/03/29 22:43:42 markm Exp $
- */
-
-#ifndef _UN_NAMESPACE_H_
-#define _UN_NAMESPACE_H_
-
-#undef		accept
-#undef		__acl_aclcheck_fd
-#undef		__acl_delete_fd
-#undef		__acl_get_fd
-#undef		__acl_set_fd
-#undef		bind
-#undef		__cap_get_fd
-#undef		__cap_set_fd
-#undef		close
-#undef		connect
-#undef		dup
-#undef		dup2
-#undef		execve
-#undef		fcntl
-#undef		flock
-#undef		fstat
-#undef		fstatfs
-#undef		fsync
-#undef		getdirentries
-#undef		getlogin
-#undef		getpeername
-#undef		getprogname
-#undef		getsockname
-#undef		getsockopt
-#undef		ioctl
-#undef		kevent
-#undef		listen
-#undef		nanosleep
-#undef		open
-#undef		pthread_getspecific
-#undef		pthread_key_create
-#undef		pthread_key_delete
-#undef		pthread_mutex_destroy
-#undef		pthread_mutex_init
-#undef		pthread_mutex_lock
-#undef		pthread_mutex_trylock
-#undef		pthread_mutex_unlock
-#undef		pthread_mutexattr_init
-#undef		pthread_mutexattr_destroy
-#undef		pthread_mutexattr_settype
-#undef		pthread_once
-#undef		pthread_self
-#undef		pthread_setspecific
-#undef		read
-#undef		readv
-#undef		recvfrom
-#undef		recvmsg
-#undef		select
-#undef		sendmsg
-#undef		sendto
-#undef		setsockopt
-#undef		sigaction
-#undef		sigprocmask
-#undef		sigsuspend
-#undef		socket
-#undef		socketpair
-#undef		wait4
-#undef		write
-#undef		writev
-
-#if 0
-#undef		creat
-#undef		fchflags
-#undef		fchmod
-#undef		fpathconf
-#undef		msync
-#undef		nfssvc
-#undef		pause
-#undef		poll
-#undef		pthread_rwlock_destroy
-#undef		pthread_rwlock_init
-#undef		pthread_rwlock_rdlock
-#undef		pthread_rwlock_tryrdlock
-#undef		pthread_rwlock_trywrlock
-#undef		pthread_rwlock_unlock
-#undef		pthread_rwlock_wrlock
-#undef		pthread_rwlockattr_init
-#undef		pthread_rwlockattr_destroy
-#undef		sched_yield
-#undef		sendfile
-#undef		shutdown
-#undef		sigaltstack
-#undef		sigpending
-#undef		sigreturn
-#undef		sigsetmask
-#undef		sleep
-#undef		system
-#undef		tcdrain
-#undef		wait
-#undef		waitpid
-#endif	/* 0 */
-
-#ifdef _SIGNAL_H_
-int     	_sigaction(int, const struct sigaction *, struct sigaction *);
-#endif
-
-#ifdef _SYS_EVENT_H_
-int		_kevent(int, const struct kevent *, int, struct kevent *,
-		    int, const struct timespec *);
-#endif
-
-#ifdef _SYS_FCNTL_H_
-int		_flock(int, int);
-#endif
-
-#undef		err
-#undef		warn
-
-#endif	/* _UN_NAMESPACE_H_ */
diff --git a/newlib/libc/sys/linux/include/unistd.h b/newlib/libc/sys/linux/include/unistd.h
deleted file mode 100644
index e2f562a3a..000000000
--- a/newlib/libc/sys/linux/include/unistd.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* libc/sys/linux/include/unistd.h - Various standard functions */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _NEWLIB_UNISTD_H
-#define _NEWLIB_UNISTD_H
-
-#include <sys/types.h>
-#include <sys/unistd.h>
-
-/* Declare some missing goodies */
-
-extern char *optarg;
-extern int optind, opterr, optopt;
-
-
-int readlink(const char *path, char *buf, size_t bufsiz);
-
-#endif
diff --git a/newlib/libc/sys/linux/include/wordexp.h b/newlib/libc/sys/linux/include/wordexp.h
deleted file mode 100644
index 5bc3d00f8..000000000
--- a/newlib/libc/sys/linux/include/wordexp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <sys/types.h>
-
-struct _wordexp_t
-{
-  size_t we_wordc;	/* Count of words matched by words. */
-  char **we_wordv;	/* Pointer to list of expanded words. */
-  size_t we_offs;	/* Slots to reserve at the beginning of we_wordv. */
-};
-
-typedef struct _wordexp_t wordexp_t;
-
-#define	WRDE_DOOFFS	0x0001	/* Use we_offs. */
-#define	WRDE_APPEND	0x0002	/* Append to output from previous call. */
-#define	WRDE_NOCMD	0x0004	/* Don't perform command substitution. */
-#define	WRDE_REUSE	0x0008	/* pwordexp points to a wordexp_t struct returned from
-                                   a previous successful call to wordexp. */
-#define	WRDE_SHOWERR	0x0010	/* Print error messages to stderr. */
-#define	WRDE_UNDEF	0x0020	/* Report attempt to expand undefined shell variable. */
-
-enum {
-  WRDE_SUCCESS,
-  WRDE_NOSPACE,
-  WRDE_BADCHAR,
-  WRDE_BADVAL,
-  WRDE_CMDSUB,
-  WRDE_SYNTAX,
-  WRDE_NOSYS
-};
-
-/* Note: This implementation of wordexp requires a version of bash
-   that supports the --wordexp and --protected arguments to be present
-   on the system.  It does not support the WRDE_UNDEF flag. */
-int wordexp(const char *, wordexp_t *, int);
-void wordfree(wordexp_t *);
diff --git a/newlib/libc/sys/linux/inode.c b/newlib/libc/sys/linux/inode.c
deleted file mode 100644
index ed468c19b..000000000
--- a/newlib/libc/sys/linux/inode.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* libc/sys/linux/inode.c - Inode-related system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/utime.h>
-#include <linux/dirent.h>
-#include <machine/syscall.h>
-
-#define _LIBC 1
-#include <sys/lock.h>
-
-
-#define __NR___umask __NR_umask
-
-_syscall2(int,link,const char *,oldpath,const char *,newpath)
-_syscall1(int,unlink,const char *,pathname)
-_syscall1(int,chdir,const char *,path)
-_syscall1(int,fchdir,int,fd)
-_syscall2(int,access,const char *,filename,int,mode)
-_syscall2(int,mkdir,const char *,pathname,mode_t,mode)
-_syscall1(int,rmdir,const char *,pathname)
-_syscall1(int,chroot,const char *,path)
-_syscall2(int,stat,const char *,file_name,struct stat *,buf)
-_syscall2(int,statfs,const char *,file_name,struct statfs *,buf)
-_syscall2(int,fstat,int,filedes,struct stat *,buf)
-_syscall2(int,fstatfs,int,filedes,struct statfs *,buf)
-_syscall3(int,getdents,int,fd,struct dirent *,dirp,unsigned int,count)
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-_syscall2(int,chmod,const char *,path,mode_t,mode)
-_syscall3(int,chown,const char *,path,uid_t,owner,gid_t,group)
-_syscall2(int,fchmod,int,filedes,mode_t,mode)
-_syscall2(int,lstat,const char *,file_name,struct stat *,buf)
-_syscall3(int,readlink,const char *,path,char *,buf,size_t,bufsiz)
-_syscall2(int,symlink,const char *,oldpath,const char *,newpath)
-_syscall2(int,utime,const char *,filename,const struct utimbuf *,buf)
-#endif
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-_syscall1(int,pipe,int *,filedes)
-#endif
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-_syscall3(int,mknod,const char *,pathname,mode_t,mode,dev_t,dev)
-#endif
-
-weak_alias(__libc_statfs,__statfs)
-weak_alias(__libc_fstatfs,__fstatfs)
-
-static _syscall3(int,fchown32,int,fd,uid_t,owner,gid_t,group)
-
-int
-fchown (int fd, uid_t owner, gid_t group)
-{
-  return __libc_fchown32 (fd, owner, group);
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-
-__LOCK_INIT(static, umask_lock);
-
-_syscall1(mode_t,__umask,mode_t,mask)
-
-mode_t
-umask (mode_t mask)
-{
-  mode_t old_mask;
-
-  /* we need to lock so as to not interfere with getumask */
-  __lock_acquire(umask_lock);
-  old_mask = __umask (mask);
-  __lock_release(umask_lock);
-
-  return old_mask;
-}
-
-mode_t
-getumask (void)
-{
-  mode_t mask;
-
-  __lock_acquire(umask_lock);
-
-  mask = __umask (0);
-  mask = __umask (mask);
-
-  __lock_release(umask_lock);
-
-  return mask;
-}
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
diff --git a/newlib/libc/sys/linux/internal_statvfs.c b/newlib/libc/sys/linux/internal_statvfs.c
deleted file mode 100644
index 9efb7c227..000000000
--- a/newlib/libc/sys/linux/internal_statvfs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-  /* Now fill in the fields we have information for.  */
-  buf->f_bsize = fsbuf.f_bsize;
-  /* Linux does not support f_frsize, so set it to the full block size.  */
-  buf->f_frsize = fsbuf.f_bsize;
-  buf->f_blocks = fsbuf.f_blocks;
-  buf->f_bfree = fsbuf.f_bfree;
-  buf->f_bavail = fsbuf.f_bavail;
-  buf->f_files = fsbuf.f_files;
-  buf->f_ffree = fsbuf.f_ffree;
-  if (sizeof (buf->f_fsid) == sizeof (fsbuf.f_fsid))
-    buf->f_fsid = (fsbuf.f_fsid.__val[0]
-		   | ((unsigned long int) fsbuf.f_fsid.__val[1]
-		      << (8 * (sizeof (buf->f_fsid)
-			       - sizeof (fsbuf.f_fsid.__val[0])))));
-  else
-    /* We cannot help here.  The statvfs element is not large enough to
-       contain both words of the statfs f_fsid field.  */
-    buf->f_fsid = fsbuf.f_fsid.__val[0];
-#ifdef _STATVFSBUF_F_UNUSED
-  buf->__f_unused = 0;
-#endif
-  buf->f_namemax = fsbuf.f_namelen;
-  memset (buf->__f_spare, '\0', 6 * sizeof (int));
-
-  /* What remains to do is to fill the fields f_favail and f_flag.  */
-
-  /* XXX I have no idea how to compute f_favail.  Any idea???  */
-  buf->f_favail = buf->f_ffree;
-
-  /* Determining the flags is tricky.  We have to read /proc/mounts or
-     the /etc/mtab file and search for the entry which matches the given
-     file.  The way we can test for matching filesystem is using the
-     device number.  */
-  buf->f_flag = 0;
-  if (STAT (&st) >= 0)
-    {
-      int save_errno = errno;
-      struct mntent mntbuf;
-      FILE *mtab;
-
-      mtab = __setmntent ("/proc/mounts", "r");
-      if (mtab == NULL)
-	mtab = __setmntent (_PATH_MOUNTED, "r");
-
-      if (mtab != NULL)
-	{
-	  char tmpbuf[1024];
-
-	  while (__getmntent_r (mtab, &mntbuf, tmpbuf, sizeof (tmpbuf)))
-	    {
-	      struct stat64 fsst;
-
-	      /* Find out about the device the current entry is for.  */
-	      if (stat64 (mntbuf.mnt_dir, &fsst) >= 0
-		  && st.st_dev == fsst.st_dev)
-		{
-		  /* Bingo, we found the entry for the device FD is on.
-		     Now interpret the option string.  */
-		  char *cp = mntbuf.mnt_opts;
-		  char *opt;
-
-		  while ((opt = strsep (&cp, ",")) != NULL)
-		    if (strcmp (opt, "ro") == 0)
-		      buf->f_flag |= ST_RDONLY;
-		    else if (strcmp (opt, "nosuid") == 0)
-		      buf->f_flag |= ST_NOSUID;
-		    else if (strcmp (opt, "noexec") == 0)
-		      buf->f_flag |= ST_NOEXEC;
-		    else if (strcmp (opt, "nodev") == 0)
-		      buf->f_flag |= ST_NODEV;
-		    else if (strcmp (opt, "sync") == 0)
-		      buf->f_flag |= ST_SYNCHRONOUS;
-		    else if (strcmp (opt, "mand") == 0)
-		      buf->f_flag |= ST_MANDLOCK;
-		    else if (strcmp (opt, "noatime") == 0)
-		      buf->f_flag |= ST_NOATIME;
-		    else if (strcmp (opt, "nodiratime") == 0)
-		      buf->f_flag |= ST_NODIRATIME;
-
-		  /* We can stop looking for more entries.  */
-		  break;
-		}
-	    }
-
-	  /* Close the file.  */
-	  __endmntent (mtab);
-	}
-
-      errno = (save_errno);
-    }
diff --git a/newlib/libc/sys/linux/intl/Makefile.am b/newlib/libc/sys/linux/intl/Makefile.am
deleted file mode 100644
index e484b2b53..000000000
--- a/newlib/libc/sys/linux/intl/Makefile.am
+++ /dev/null
@@ -1,36 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	bindtextdom.c catgets.c dcgettext.c dgettext.c gettext.c       \
-	dcigettext.c dcngettext.c dngettext.c ngettext.c open_catalog.c \
-	finddomain.c loadmsgcat.c localealias.c textdomain.c \
-	l10nflist.c explodename.c plural.c stpcpy.c
-
-
-libintl_la_LDFLAGS = -Xcompiler -nostdlib
-
-msgcatdir = /usr/share/locale
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libintl.la
-libintl_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA = 
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
-
-AM_CFLAGS = -DNOT_IN_libc -DHAVE_CONFIG_H -D_GNU_SOURCE -D__libc_enable_secure=1 -D'LOCALEDIR="$(msgcatdir)"' -D'LOCALE_ALIAS_PATH="$(msgcatdir)"' -DNLSPATH='"$(msgcatdir)/%L/%N:$(msgcatdir)/%L/LC_MESSAGES/%N:$(msgcatdir)/%l/%N:$(msgcatdir)/%l/LC_MESSAGES/%N:"'
-
-# shouldn't have to do the following, but if needed
-BISONFLAGS = --yacc --name-prefix=__gettext --output
-plural.c: plural.y
-	$(BISON) $(BISONFLAGS) $@ $^
-
diff --git a/newlib/libc/sys/linux/intl/Makefile.in b/newlib/libc/sys/linux/intl/Makefile.in
deleted file mode 100644
index 62ab58425..000000000
--- a/newlib/libc/sys/linux/intl/Makefile.in
+++ /dev/null
@@ -1,388 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-EXTRA_SUBDIRS = @EXTRA_SUBDIRS@
-EXTRA_SUBLIBS = @EXTRA_SUBLIBS@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	bindtextdom.c catgets.c dcgettext.c dgettext.c gettext.c       \
-	dcigettext.c dcngettext.c dngettext.c ngettext.c open_catalog.c \
-	finddomain.c loadmsgcat.c localealias.c textdomain.c \
-	l10nflist.c explodename.c plural.c stpcpy.c
-
-
-libintl_la_LDFLAGS = -Xcompiler -nostdlib
-
-msgcatdir = /usr/share/locale
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libintl.la
-@USE_LIBTOOL_TRUE@libintl_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-AM_CFLAGS = -DNOT_IN_libc -DHAVE_CONFIG_H -D_GNU_SOURCE -D__libc_enable_secure=1 -D'LOCALEDIR="$(msgcatdir)"' -D'LOCALE_ALIAS_PATH="$(msgcatdir)"' -DNLSPATH='"$(msgcatdir)/%L/%N:$(msgcatdir)/%L/LC_MESSAGES/%N:$(msgcatdir)/%l/%N:$(msgcatdir)/%l/LC_MESSAGES/%N:"'
-
-# shouldn't have to do the following, but if needed
-BISONFLAGS = --yacc --name-prefix=__gettext --output
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  bindtextdom.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@catgets.$(OBJEXT) dcgettext.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dgettext.$(OBJEXT) gettext.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dcigettext.$(OBJEXT) dcngettext.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dngettext.$(OBJEXT) ngettext.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@open_catalog.$(OBJEXT) finddomain.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@loadmsgcat.$(OBJEXT) localealias.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@textdomain.$(OBJEXT) l10nflist.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@explodename.$(OBJEXT) plural.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@stpcpy.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libintl_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libintl_la_OBJECTS =  bindtextdom.lo catgets.lo \
-@USE_LIBTOOL_TRUE@dcgettext.lo dgettext.lo gettext.lo dcigettext.lo \
-@USE_LIBTOOL_TRUE@dcngettext.lo dngettext.lo ngettext.lo \
-@USE_LIBTOOL_TRUE@open_catalog.lo finddomain.lo loadmsgcat.lo \
-@USE_LIBTOOL_TRUE@localealias.lo textdomain.lo l10nflist.lo \
-@USE_LIBTOOL_TRUE@explodename.lo plural.lo stpcpy.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libintl_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libintl_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus intl/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libintl.la: $(libintl_la_OBJECTS) $(libintl_la_DEPENDENCIES)
-	$(LINK)  $(libintl_la_LDFLAGS) $(libintl_la_OBJECTS) $(libintl_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = intl
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-plural.c: plural.y
-	$(BISON) $(BISONFLAGS) $@ $^
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/intl/bindtextdom.c b/newlib/libc/sys/linux/intl/bindtextdom.c
deleted file mode 100644
index afd503050..000000000
--- a/newlib/libc/sys/linux/intl/bindtextdom.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/* Implementation of the bindtextdomain(3) function
-   Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) (bcopy (Src, Dst, Num), (Dst))
-# endif
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-#include "gettextP.h"
-
-#ifdef _LIBC
-/* We have to handle multi-threaded applications.  */
-# include <bits/libc-lock.h>
-#else
-/* Provide dummy implementation if this is outside glibc.  */
-# define __libc_rwlock_define(CLASS, NAME)
-# define __libc_rwlock_wrlock(NAME)
-# define __libc_rwlock_unlock(NAME)
-#endif
-
-/* The internal variables in the standalone libintl.a must have different
-   names than the internal variables in GNU libc, otherwise programs
-   using libintl.a cannot be linked statically.  */
-#if !defined _LIBC
-# define _nl_default_dirname _nl_default_dirname__
-# define _nl_domain_bindings _nl_domain_bindings__
-#endif
-
-/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>.  */
-#ifndef offsetof
-# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Contains the default location of the message catalogs.  */
-extern const char _nl_default_dirname[];
-
-/* List with bindings of specific domains.  */
-extern struct binding *_nl_domain_bindings;
-
-/* Lock variable to protect the global data in the gettext implementation.  */
-__libc_rwlock_define (extern, _nl_state_lock)
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define BINDTEXTDOMAIN __bindtextdomain
-# define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset
-# ifdef _GLIBC
-#  ifndef strdup
-#   define strdup(str) __strdup (str)
-#  endif
-# endif
-#else
-# define BINDTEXTDOMAIN bindtextdomain__
-# define BIND_TEXTDOMAIN_CODESET bind_textdomain_codeset__
-#endif
-
-/* Prototypes for local functions.  */
-static void set_binding_values PARAMS ((const char *domainname,
-					const char **dirnamep,
-					const char **codesetp));
-
-/* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP
-   to be used for the DOMAINNAME message catalog.
-   If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not
-   modified, only the current value is returned.
-   If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither
-   modified nor returned.  */
-static void
-set_binding_values (domainname, dirnamep, codesetp)
-     const char *domainname;
-     const char **dirnamep;
-     const char **codesetp;
-{
-  struct binding *binding;
-  int modified;
-
-  /* Some sanity checks.  */
-  if (domainname == NULL || domainname[0] == '\0')
-    {
-      if (dirnamep)
-	*dirnamep = NULL;
-      if (codesetp)
-	*codesetp = NULL;
-      return;
-    }
-
-  __libc_rwlock_wrlock (_nl_state_lock);
-
-  modified = 0;
-
-  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-    {
-      int compare = strcmp (domainname, binding->domainname);
-      if (compare == 0)
-	/* We found it!  */
-	break;
-      if (compare < 0)
-	{
-	  /* It is not in the list.  */
-	  binding = NULL;
-	  break;
-	}
-    }
-
-  if (binding != NULL)
-    {
-      if (dirnamep)
-	{
-	  const char *dirname = *dirnamep;
-
-	  if (dirname == NULL)
-	    /* The current binding has be to returned.  */
-	    *dirnamep = binding->dirname;
-	  else
-	    {
-	      /* The domain is already bound.  If the new value and the old
-		 one are equal we simply do nothing.  Otherwise replace the
-		 old binding.  */
-	      char *result = binding->dirname;
-	      if (strcmp (dirname, result) != 0)
-		{
-		  if (strcmp (dirname, _nl_default_dirname) == 0)
-		    result = (char *) _nl_default_dirname;
-		  else
-		    {
-#if defined _LIBC || defined HAVE_STRDUP
-		      result = strdup (dirname);
-#else
-		      size_t len = strlen (dirname) + 1;
-		      result = (char *) malloc (len);
-		      if (__builtin_expect (result != NULL, 1))
-			memcpy (result, dirname, len);
-#endif
-		    }
-
-		  if (__builtin_expect (result != NULL, 1))
-		    {
-		      if (binding->dirname != _nl_default_dirname)
-			free (binding->dirname);
-
-		      binding->dirname = result;
-		      modified = 1;
-		    }
-		}
-	      *dirnamep = result;
-	    }
-	}
-
-      if (codesetp)
-	{
-	  const char *codeset = *codesetp;
-
-	  if (codeset == NULL)
-	    /* The current binding has be to returned.  */
-	    *codesetp = binding->codeset;
-	  else
-	    {
-	      /* The domain is already bound.  If the new value and the old
-		 one are equal we simply do nothing.  Otherwise replace the
-		 old binding.  */
-	      char *result = binding->codeset;
-	      if (result == NULL || strcmp (codeset, result) != 0)
-		{
-#if defined _LIBC || defined HAVE_STRDUP
-		  result = strdup (codeset);
-#else
-		  size_t len = strlen (codeset) + 1;
-		  result = (char *) malloc (len);
-		  if (__builtin_expect (result != NULL, 1))
-		    memcpy (result, codeset, len);
-#endif
-
-		  if (__builtin_expect (result != NULL, 1))
-		    {
-		      if (binding->codeset != NULL)
-			free (binding->codeset);
-
-		      binding->codeset = result;
-		      ++binding->codeset_cntr;
-		      modified = 1;
-		    }
-		}
-	      *codesetp = result;
-	    }
-	}
-    }
-  else if ((dirnamep == NULL || *dirnamep == NULL)
-	   && (codesetp == NULL || *codesetp == NULL))
-    {
-      /* Simply return the default values.  */
-      if (dirnamep)
-	*dirnamep = _nl_default_dirname;
-      if (codesetp)
-	*codesetp = NULL;
-    }
-  else
-    {
-      /* We have to create a new binding.  */
-      size_t len = strlen (domainname) + 1;
-      struct binding *new_binding =
-	(struct binding *) malloc (offsetof (struct binding, domainname) + len);
-
-      if (__builtin_expect (new_binding == NULL, 0))
-	goto failed;
-
-      memcpy (new_binding->domainname, domainname, len);
-
-      if (dirnamep)
-	{
-	  const char *dirname = *dirnamep;
-
-	  if (dirname == NULL)
-	    /* The default value.  */
-	    dirname = _nl_default_dirname;
-	  else
-	    {
-	      if (strcmp (dirname, _nl_default_dirname) == 0)
-		dirname = _nl_default_dirname;
-	      else
-		{
-		  char *result;
-#if defined _LIBC || defined HAVE_STRDUP
-		  result = strdup (dirname);
-		  if (__builtin_expect (result == NULL, 0))
-		    goto failed_dirname;
-#else
-		  size_t len = strlen (dirname) + 1;
-		  result = (char *) malloc (len);
-		  if (__builtin_expect (result == NULL, 0))
-		    goto failed_dirname;
-		  memcpy (result, dirname, len);
-#endif
-		  dirname = result;
-		}
-	    }
-	  *dirnamep = dirname;
-	  new_binding->dirname = (char *) dirname;
-	}
-      else
-	/* The default value.  */
-	new_binding->dirname = (char *) _nl_default_dirname;
-
-      new_binding->codeset_cntr = 0;
-
-      if (codesetp)
-	{
-	  const char *codeset = *codesetp;
-
-	  if (codeset != NULL)
-	    {
-	      char *result;
-
-#if defined _LIBC || defined HAVE_STRDUP
-	      result = strdup (codeset);
-	      if (__builtin_expect (result == NULL, 0))
-		goto failed_codeset;
-#else
-	      size_t len = strlen (codeset) + 1;
-	      result = (char *) malloc (len);
-	      if (__builtin_expect (result == NULL, 0))
-		goto failed_codeset;
-	      memcpy (result, codeset, len);
-#endif
-	      codeset = result;
-	      ++new_binding->codeset_cntr;
-	    }
-	  *codesetp = codeset;
-	  new_binding->codeset = (char *) codeset;
-	}
-      else
-	new_binding->codeset = NULL;
-
-      /* Now enqueue it.  */
-      if (_nl_domain_bindings == NULL
-	  || strcmp (domainname, _nl_domain_bindings->domainname) < 0)
-	{
-	  new_binding->next = _nl_domain_bindings;
-	  _nl_domain_bindings = new_binding;
-	}
-      else
-	{
-	  binding = _nl_domain_bindings;
-	  while (binding->next != NULL
-		 && strcmp (domainname, binding->next->domainname) > 0)
-	    binding = binding->next;
-
-	  new_binding->next = binding->next;
-	  binding->next = new_binding;
-	}
-
-      modified = 1;
-
-      /* Here we deal with memory allocation failures.  */
-      if (0)
-	{
-	failed_codeset:
-	  if (new_binding->dirname != _nl_default_dirname)
-	    free (new_binding->dirname);
-	failed_dirname:
-	  free (new_binding);
-	failed:
-	  if (dirnamep)
-	    *dirnamep = NULL;
-	  if (codesetp)
-	    *codesetp = NULL;
-	}
-    }
-
-  /* If we modified any binding, we flush the caches.  */
-  if (modified)
-    ++_nl_msg_cat_cntr;
-
-  __libc_rwlock_unlock (_nl_state_lock);
-}
-
-/* Specify that the DOMAINNAME message catalog will be found
-   in DIRNAME rather than in the system locale data base.  */
-char *
-BINDTEXTDOMAIN (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
-{
-  set_binding_values (domainname, &dirname, NULL);
-  return (char *) dirname;
-}
-
-/* Specify the character encoding in which the messages from the
-   DOMAINNAME message catalog will be returned.  */
-char *
-BIND_TEXTDOMAIN_CODESET (domainname, codeset)
-     const char *domainname;
-     const char *codeset;
-{
-  set_binding_values (domainname, NULL, &codeset);
-  return (char *) codeset;
-}
-
-#ifdef _LIBC
-/* Aliases for function names in GNU C Library.  */
-weak_alias (__bindtextdomain, bindtextdomain);
-weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset);
-#endif
diff --git a/newlib/libc/sys/linux/intl/catgets.c b/newlib/libc/sys/linux/intl/catgets.c
deleted file mode 100644
index b11cc597b..000000000
--- a/newlib/libc/sys/linux/intl/catgets.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper, <drepper@gnu.org>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <errno.h>
-#include <locale.h>
-#include <nl_types.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/mman.h>
-
-#include "catgetsinfo.h"
-
-
-/* Open the catalog and return a descriptor for the catalog.  */
-nl_catd
-catopen (const char *cat_name, int flag)
-{
-  __nl_catd result;
-  const char *env_var = NULL;
-  const char *nlspath = NULL;
-
-  if (strchr (cat_name, '/') == NULL)
-    {
-      if (flag == NL_CAT_LOCALE)
-	/* Use the current locale setting for LC_MESSAGES.  */
-	env_var = setlocale (LC_MESSAGES, NULL);
-      else
-	/* Use the LANG environment variable.  */
-	env_var = getenv ("LANG");
-
-      if (env_var == NULL || *env_var == '\0'
-	  || (__libc_enable_secure && strchr (env_var, '/') != NULL))
-	env_var = "C";
-
-      nlspath = getenv ("NLSPATH");
-      if (nlspath != NULL && *nlspath != '\0')
-	{
-	  /* Append the system dependent directory.  */
-	  size_t len = strlen (nlspath) + 1 + sizeof NLSPATH;
-	  char *tmp = alloca (len);
-
-	  __stpcpy (__stpcpy (__stpcpy (tmp, nlspath), ":"), NLSPATH);
-	  nlspath = tmp;
-	}
-      else
-	nlspath = NLSPATH;
-    }
-
-  result = (__nl_catd) malloc (sizeof (*result));
-  if (result == NULL)
-    /* We cannot get enough memory.  */
-    return (nl_catd) -1;
-
-  if (__open_catalog (cat_name, nlspath, env_var, result) != 0)
-    /* Couldn't open the file.  */
-    return (nl_catd) -1;
-
-  return (nl_catd) result;
-}
-
-
-/* Return message from message catalog.  */
-char *
-catgets (nl_catd catalog_desc, int set, int message, const char *string)
-{
-  __nl_catd catalog;
-  size_t idx;
-  size_t cnt;
-
-  /* Be generous if catalog which failed to be open is used.  */
-  if (catalog_desc == (nl_catd) -1 || ++set <= 0 || message < 0)
-    return (char *) string;
-
-  catalog = (__nl_catd) catalog_desc;
-
-  idx = ((set * message) % catalog->plane_size) * 3;
-  cnt = 0;
-  do
-    {
-      if (catalog->name_ptr[idx + 0] == (u_int32_t) set
-	  && catalog->name_ptr[idx + 1] == (u_int32_t) message)
-	return (char *) &catalog->strings[catalog->name_ptr[idx + 2]];
-
-      idx += catalog->plane_size * 3;
-    }
-  while (++cnt < catalog->plane_depth);
-
-  __set_errno (ENOMSG);
-  return (char *) string;
-}
-
-
-/* Return resources used for loaded message catalog.  */
-int
-catclose (nl_catd catalog_desc)
-{
-  __nl_catd catalog;
-
-  /* Be generous if catalog which failed to be open is used.  */
-  if (catalog_desc == (nl_catd) -1)
-    {
-      __set_errno (EBADF);
-      return -1;
-    }
-
-  catalog = (__nl_catd) catalog_desc;
-
-#ifdef _POSIX_MAPPED_FILES
-  if (catalog->status == mmapped)
-    __munmap ((void *) catalog->file_ptr, catalog->file_size);
-  else
-#endif	/* _POSIX_MAPPED_FILES */
-    if (catalog->status == malloced)
-      free ((void *) catalog->file_ptr);
-    else
-      {
-	__set_errno (EBADF);
-	return -1;
-      }
-
-  free ((void *) catalog);
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/intl/catgetsinfo.h b/newlib/libc/sys/linux/intl/catgetsinfo.h
deleted file mode 100644
index d4aa003b3..000000000
--- a/newlib/libc/sys/linux/intl/catgetsinfo.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Copyright (C) 1996, 1997, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper, <drepper@gnu.ai.mit.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <sys/types.h>
-
-
-struct catalog_obj
-{
-  u_int32_t magic;
-  u_int32_t plane_size;
-  u_int32_t plane_depth;
-  /* This is in fact two arrays in one: always a pair of name and
-     pointer into the data area.  */
-  u_int32_t name_ptr[0];
-};
-
-
-/* This structure will be filled after loading the catalog.  */
-typedef struct catalog_info
-{
-  enum { mmapped, malloced } status;
-
-  size_t plane_size;
-  size_t plane_depth;
-  u_int32_t *name_ptr;
-  const char *strings;
-
-  struct catalog_obj *file_ptr;
-  size_t file_size;
-} *__nl_catd;
-
-
-
-/* The magic number to signal we really have a catalog file.  */
-#define CATGETS_MAGIC 0x960408de
-
-
-/* Prototypes for helper functions.  */
-extern int __open_catalog (const char *cat_name, const char *nlspath,
-			   const char *env_var, __nl_catd __catalog);
diff --git a/newlib/libc/sys/linux/intl/config.h b/newlib/libc/sys/linux/intl/config.h
deleted file mode 100644
index 69de0abcb..000000000
--- a/newlib/libc/sys/linux/intl/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#define HAVE_ICONV 1
-#define HAVE_STRING_H 1
-#define HAVE_MEMPCPY 1
-#define HAVE_STRCHR 1
-#define HAVE_STRDUP 1
-#define HAVE_MMAP 1
-#define HAVE_STRTOUL 1
-#define HAVE_ALLOCA_H 1
-#define HAVE_MALLOC_H 1
-#define HAVE_STRCASECMP 1
-#define HAVE_WEAK_SYMBOLS 1
-#define HAVE_GNU_LD 1
-#define HAVE_ELF 1
-#define __ASSUME_REALTIME_SIGNALS 1
-#define ASM_GLOBAL_DIRECTIVE .global
-
-#define TEMP_FAILURE_RETRY(expression) \
-  (__extension__                                                              \
-    ({ long int __result;                                                     \
-       do __result = (long int) (expression);                                 \
-       while (__result == -1L && errno == EINTR);                             \
-       __result; }))
-
-#define UINT32_C(c)    c ## U
-
-#include <machine/sysdep.h>
-#include <features.h>
-
-#define _LIBC 1
diff --git a/newlib/libc/sys/linux/intl/dcgettext.c b/newlib/libc/sys/linux/intl/dcgettext.c
deleted file mode 100644
index c250da42b..000000000
--- a/newlib/libc/sys/linux/intl/dcgettext.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Implementation of the dcgettext(3) function.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DCGETTEXT __dcgettext
-# define DCIGETTEXT __dcigettext
-#else
-# define DCGETTEXT dcgettext__
-# define DCIGETTEXT dcigettext__
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-   locale.  */
-char *
-DCGETTEXT (domainname, msgid, category)
-     const char *domainname;
-     const char *msgid;
-     int category;
-{
-  return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dcgettext, dcgettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/dcigettext.c b/newlib/libc/sys/linux/intl/dcigettext.c
deleted file mode 100644
index 017be4623..000000000
--- a/newlib/libc/sys/linux/intl/dcigettext.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/* Implementation of the internal dcigettext function.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef MB_CAPABLE
-
-/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-   This must come before <config.h> because <config.h> may include
-   <features.h>, and once <features.h> has been included, it's too late.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE	1
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-
-#if defined __GNUC__ && !defined C_ALLOCA
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if (defined HAVE_ALLOCA_H || defined _LIBC) && !defined C_ALLOCA
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#ifndef __set_errno
-# define __set_errno(val) errno = (val)
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stddef.h>
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
-
-#if defined HAVE_SYS_PARAM_H || defined _LIBC
-# include <sys/param.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-#include "hash-string.h"
-
-/* Thread safetyness.  */
-#ifdef _LIBC
-# include <bits/libc-lock.h>
-#else
-/* Provide dummy implementation if this is outside glibc.  */
-# define __libc_lock_define_initialized(CLASS, NAME)
-# define __libc_lock_lock(NAME)
-# define __libc_lock_unlock(NAME)
-# define __libc_rwlock_define_initialized(CLASS, NAME)
-# define __libc_rwlock_rdlock(NAME)
-# define __libc_rwlock_unlock(NAME)
-#endif
-
-/* Alignment of types.  */
-#if defined __GNUC__ && __GNUC__ >= 2
-# define alignof(TYPE) __alignof__ (TYPE)
-#else
-# define alignof(TYPE) \
-    ((int) &((struct { char dummy1; TYPE dummy2; } *) 0)->dummy2)
-#endif
-
-/* The internal variables in the standalone libintl.a must have different
-   names than the internal variables in GNU libc, otherwise programs
-   using libintl.a cannot be linked statically.  */
-#if !defined _LIBC
-# define _nl_default_default_domain _nl_default_default_domain__
-# define _nl_current_default_domain _nl_current_default_domain__
-# define _nl_default_dirname _nl_default_dirname__
-# define _nl_domain_bindings _nl_domain_bindings__
-#endif
-
-/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>.  */
-#ifndef offsetof
-# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifdef _GLIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define getcwd __getcwd
-# ifndef stpcpy
-#  define stpcpy __stpcpy
-# endif
-# define tfind __tfind
-#else
-# if !defined HAVE_GETCWD
-char *getwd ();
-#  define getcwd(buf, max) getwd (buf)
-# else
-char *getcwd ();
-# endif
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-# ifndef HAVE_MEMPCPY
-static void *mempcpy PARAMS ((void *dest, const void *src, size_t n));
-# endif
-#endif
-
-/* Amount to increase buffer size by in each try.  */
-#define PATH_INCR 32
-
-/* The following is from pathmax.h.  */
-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
-   PATH_MAX but might cause redefinition warnings when sys/param.h is
-   later included (as on MORE/BSD 4.3).  */
-#if defined _POSIX_VERSION || (defined HAVE_LIMITS_H && !defined __GNUC__)
-# include <limits.h>
-#endif
-
-#ifndef _POSIX_PATH_MAX
-# define _POSIX_PATH_MAX 255
-#endif
-
-#if !defined PATH_MAX && defined _PC_PATH_MAX
-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
-#endif
-
-/* Don't include sys/param.h if it already has been.  */
-#if defined HAVE_SYS_PARAM_H && !defined PATH_MAX && !defined MAXPATHLEN
-# include <sys/param.h>
-#endif
-
-#if !defined PATH_MAX && defined MAXPATHLEN
-# define PATH_MAX MAXPATHLEN
-#endif
-
-#ifndef PATH_MAX
-# define PATH_MAX _POSIX_PATH_MAX
-#endif
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
-   ``Directs `setlocale()' to query `category' and return the current
-     setting of `local'.''
-   However it does not specify the exact format.  Neither do SUSV2 and
-   ISO C 99.  So we can use this feature only on selected systems (e.g.
-   those using GNU C Library).  */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* This is the type used for the search tree where known translations
-   are stored.  */
-struct known_translation_t
-{
-  /* Domain in which to search.  */
-  char *domainname;
-
-  /* The category.  */
-  int category;
-
-  /* State of the catalog counter at the point the string was found.  */
-  int counter;
-
-  /* Catalog where the string was found.  */
-  struct loaded_l10nfile *domain;
-
-  /* And finally the translation.  */
-  const char *translation;
-  size_t translation_length;
-
-  /* Pointer to the string in question.  */
-  char msgid[ZERO];
-};
-
-/* Root of the search tree with known translations.  We can use this
-   only if the system provides the `tsearch' function family.  */
-#if defined HAVE_TSEARCH || defined _LIBC
-# include <search.h>
-
-static void *root;
-
-# ifdef _GLIBC
-#  define tsearch __tsearch
-# endif
-
-/* Function to compare two entries in the table of known translations.  */
-static int transcmp PARAMS ((const void *p1, const void *p2));
-static int
-transcmp (p1, p2)
-     const void *p1;
-     const void *p2;
-{
-  const struct known_translation_t *s1;
-  const struct known_translation_t *s2;
-  int result;
-
-  s1 = (const struct known_translation_t *) p1;
-  s2 = (const struct known_translation_t *) p2;
-
-  result = strcmp (s1->msgid, s2->msgid);
-  if (result == 0)
-    {
-      result = strcmp (s1->domainname, s2->domainname);
-      if (result == 0)
-	/* We compare the category last (though this is the cheapest
-	   operation) since it is hopefully always the same (namely
-	   LC_MESSAGES).  */
-	result = s1->category - s2->category;
-    }
-
-  return result;
-}
-#endif
-
-/* Name of the default domain used for gettext(3) prior any call to
-   textdomain(3).  The default value for this is "messages".  */
-const char _nl_default_default_domain[] = "messages";
-
-/* Value used as the default domain for gettext(3).  */
-const char *_nl_current_default_domain = _nl_default_default_domain;
-
-/* Contains the default location of the message catalogs.  */
-const char _nl_default_dirname[] = LOCALEDIR;
-
-/* List with bindings of specific domains created by bindtextdomain()
-   calls.  */
-struct binding *_nl_domain_bindings;
-
-/* Prototypes for local functions.  */
-static char *plural_lookup PARAMS ((struct loaded_l10nfile *domain,
-				    unsigned long int n,
-				    const char *translation,
-				    size_t translation_len))
-     internal_function;
-static unsigned long int plural_eval PARAMS ((struct expression *pexp,
-					      unsigned long int n))
-     internal_function;
-static const char *category_to_name PARAMS ((int category)) internal_function;
-static const char *guess_category_value PARAMS ((int category,
-						 const char *categoryname))
-     internal_function;
-
-
-/* For those loosing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-/* Nothing has to be done.  */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
-#else
-struct block_list
-{
-  void *address;
-  struct block_list *next;
-};
-# define ADD_BLOCK(list, addr)						      \
-  do {									      \
-    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
-    /* If we cannot get a free block we cannot add the new element to	      \
-       the list.  */							      \
-    if (newp != NULL) {							      \
-      newp->address = (addr);						      \
-      newp->next = (list);						      \
-      (list) = newp;							      \
-    }									      \
-  } while (0)
-# define FREE_BLOCKS(list)						      \
-  do {									      \
-    while (list != NULL) {						      \
-      struct block_list *old = list;					      \
-      list = list->next;						      \
-      free (old);							      \
-    }									      \
-  } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif	/* have alloca */
-
-
-#ifdef _LIBC
-/* List of blocks allocated for translations.  */
-typedef struct transmem_list
-{
-  struct transmem_list *next;
-  char data[ZERO];
-} transmem_block_t;
-static struct transmem_list *transmem_list;
-#else
-typedef unsigned char transmem_block_t;
-#endif
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DCIGETTEXT __dcigettext
-#else
-# define DCIGETTEXT dcigettext__
-#endif
-
-/* Lock variable to protect the global data in the gettext implementation.  */
-__libc_rwlock_define_initialized (, _nl_state_lock)
-
-/* Checking whether the binaries runs SUID must be done and glibc provides
-   easier methods therefore we make a difference here.  */
-#ifdef _LIBC
-# define ENABLE_SECURE __libc_enable_secure
-# define DETERMINE_SECURE
-#else
-static int enable_secure;
-# define ENABLE_SECURE (enable_secure == 1)
-# define DETERMINE_SECURE \
-  if (enable_secure == 0)						      \
-    {									      \
-      if (getuid () != geteuid () || getgid () != getegid ())		      \
-	enable_secure = 1;						      \
-      else								      \
-	enable_secure = -1;						      \
-    }
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current
-   CATEGORY locale and, if PLURAL is nonzero, search over string
-   depending on the plural form determined by N.  */
-char *
-DCIGETTEXT (domainname, msgid1, msgid2, plural, n, category)
-     const char *domainname;
-     const char *msgid1;
-     const char *msgid2;
-     int plural;
-     unsigned long int n;
-     int category;
-{
-#ifndef HAVE_ALLOCA
-  struct block_list *block_list = NULL;
-#endif
-  struct loaded_l10nfile *domain;
-  struct binding *binding;
-  const char *categoryname;
-  const char *categoryvalue;
-  char *dirname, *xdomainname;
-  char *single_locale;
-  char *retval;
-  size_t retlen;
-  int saved_errno;
-#if defined HAVE_TSEARCH || defined _LIBC
-  struct known_translation_t *search;
-  struct known_translation_t **foundp = NULL;
-  size_t msgid_len;
-#endif
-  size_t domainname_len;
-
-  /* If no real MSGID is given return NULL.  */
-  if (msgid1 == NULL)
-    return NULL;
-
-  __libc_rwlock_rdlock (_nl_state_lock);
-
-  /* If DOMAINNAME is NULL, we are interested in the default domain.  If
-     CATEGORY is not LC_MESSAGES this might not make much sense but the
-     definition left this undefined.  */
-  if (domainname == NULL)
-    domainname = _nl_current_default_domain;
-
-#if defined HAVE_TSEARCH || defined _LIBC
-  msgid_len = strlen (msgid1) + 1;
-
-  /* Try to find the translation among those which we found at
-     some time.  */
-  search = (struct known_translation_t *)
-	   alloca (offsetof (struct known_translation_t, msgid) + msgid_len);
-  memcpy (search->msgid, msgid1, msgid_len);
-  search->domainname = (char *) domainname;
-  search->category = category;
-
-  foundp = (struct known_translation_t **) tfind (search, &root, transcmp);
-  if (foundp != NULL && (*foundp)->counter == _nl_msg_cat_cntr)
-    {
-      /* Now deal with plural.  */
-      if (plural)
-	retval = plural_lookup ((*foundp)->domain, n, (*foundp)->translation,
-				(*foundp)->translation_length);
-      else
-	retval = (char *) (*foundp)->translation;
-
-      __libc_rwlock_unlock (_nl_state_lock);
-      return retval;
-    }
-#endif
-
-  /* Preserve the `errno' value.  */
-  saved_errno = errno;
-
-  /* See whether this is a SUID binary or not.  */
-  DETERMINE_SECURE;
-
-  /* First find matching binding.  */
-  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-    {
-      int compare = strcmp (domainname, binding->domainname);
-      if (compare == 0)
-	/* We found it!  */
-	break;
-      if (compare < 0)
-	{
-	  /* It is not in the list.  */
-	  binding = NULL;
-	  break;
-	}
-    }
-
-  if (binding == NULL)
-    dirname = (char *) _nl_default_dirname;
-  else if (binding->dirname[0] == '/')
-    dirname = binding->dirname;
-  else
-    {
-      /* We have a relative path.  Make it absolute now.  */
-      size_t dirname_len = strlen (binding->dirname) + 1;
-      size_t path_max;
-      char *ret;
-
-      path_max = (unsigned int) PATH_MAX;
-      path_max += 2;		/* The getcwd docs say to do this.  */
-
-      dirname = (char *) alloca (path_max + dirname_len);
-      ADD_BLOCK (block_list, dirname);
-
-      __set_errno (0);
-      while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
-	{
-	  path_max += PATH_INCR;
-	  dirname = (char *) alloca (path_max + dirname_len);
-	  ADD_BLOCK (block_list, dirname);
-	  __set_errno (0);
-	}
-
-      if (ret == NULL)
-	{
-	  /* We cannot get the current working directory.  Don't signal an
-	     error but simply return the default string.  */
-	  FREE_BLOCKS (block_list);
-	  __libc_rwlock_unlock (_nl_state_lock);
-	  __set_errno (saved_errno);
-	  return (plural == 0
-		  ? (char *) msgid1
-		  /* Use the Germanic plural rule.  */
-		  : n == 1 ? (char *) msgid1 : (char *) msgid2);
-	}
-
-      stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
-    }
-
-  /* Now determine the symbolic name of CATEGORY and its value.  */
-  categoryname = category_to_name (category);
-  categoryvalue = guess_category_value (category, categoryname);
-
-  domainname_len = strlen (domainname);
-  xdomainname = (char *) alloca (strlen (categoryname)
-				 + domainname_len + 5);
-  ADD_BLOCK (block_list, xdomainname);
-
-  stpcpy (mempcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
-		  domainname, domainname_len),
-	  ".mo");
-
-  /* Creating working area.  */
-  single_locale = (char *) alloca (strlen (categoryvalue) + 1);
-  ADD_BLOCK (block_list, single_locale);
-
-
-  /* Search for the given string.  This is a loop because we perhaps
-     got an ordered list of languages to consider for the translation.  */
-  while (1)
-    {
-      /* Make CATEGORYVALUE point to the next element of the list.  */
-      while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
-	++categoryvalue;
-      if (categoryvalue[0] == '\0')
-	{
-	  /* The whole contents of CATEGORYVALUE has been searched but
-	     no valid entry has been found.  We solve this situation
-	     by implicitly appending a "C" entry, i.e. no translation
-	     will take place.  */
-	  single_locale[0] = 'C';
-	  single_locale[1] = '\0';
-	}
-      else
-	{
-	  char *cp = single_locale;
-	  while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
-	    *cp++ = *categoryvalue++;
-	  *cp = '\0';
-
-	  /* When this is a SUID binary we must not allow accessing files
-	     outside the dedicated directories.  */
-	  if (ENABLE_SECURE && strchr (single_locale, '/') != NULL)
-	    /* Ingore this entry.  */
-	    continue;
-	}
-
-      /* If the current locale value is C (or POSIX) we don't load a
-	 domain.  Return the MSGID.  */
-      if (strcmp (single_locale, "C") == 0
-	  || strcmp (single_locale, "POSIX") == 0)
-	{
-	  FREE_BLOCKS (block_list);
-	  __libc_rwlock_unlock (_nl_state_lock);
-	  __set_errno (saved_errno);
-	  return (plural == 0
-		  ? (char *) msgid1
-		  /* Use the Germanic plural rule.  */
-		  : n == 1 ? (char *) msgid1 : (char *) msgid2);
-	}
-
-
-      /* Find structure describing the message catalog matching the
-	 DOMAINNAME and CATEGORY.  */
-      domain = _nl_find_domain (dirname, single_locale, xdomainname, binding);
-
-      if (domain != NULL)
-	{
-	  retval = _nl_find_msg (domain, binding, msgid1, &retlen);
-
-	  if (retval == NULL)
-	    {
-	      int cnt;
-
-	      for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
-		{
-		  retval = _nl_find_msg (domain->successor[cnt], binding,
-					 msgid1, &retlen);
-
-		  if (retval != NULL)
-		    {
-		      domain = domain->successor[cnt];
-		      break;
-		    }
-		}
-	    }
-
-	  if (retval != NULL)
-	    {
-	      /* Found the translation of MSGID1 in domain DOMAIN:
-		 starting at RETVAL, RETLEN bytes.  */
-	      FREE_BLOCKS (block_list);
-	      __set_errno (saved_errno);
-#if defined HAVE_TSEARCH || defined _LIBC
-	      if (foundp == NULL)
-		{
-		  /* Create a new entry and add it to the search tree.  */
-		  struct known_translation_t *newp;
-
-		  newp = (struct known_translation_t *)
-		    malloc (offsetof (struct known_translation_t, msgid)
-			    + msgid_len + domainname_len + 1);
-		  if (newp != NULL)
-		    {
-		      newp->domainname =
-			mempcpy (newp->msgid, msgid1, msgid_len);
-		      memcpy (newp->domainname, domainname, domainname_len + 1);
-		      newp->category = category;
-		      newp->counter = _nl_msg_cat_cntr;
-		      newp->domain = domain;
-		      newp->translation = retval;
-		      newp->translation_length = retlen;
-
-		      /* Insert the entry in the search tree.  */
-		      foundp = (struct known_translation_t **)
-			tsearch (newp, &root, transcmp);
-		      if (foundp == NULL
-			  || __builtin_expect (*foundp != newp, 0))
-			/* The insert failed.  */
-			free (newp);
-		    }
-		}
-	      else
-		{
-		  /* We can update the existing entry.  */
-		  (*foundp)->counter = _nl_msg_cat_cntr;
-		  (*foundp)->domain = domain;
-		  (*foundp)->translation = retval;
-		  (*foundp)->translation_length = retlen;
-		}
-#endif
-	      /* Now deal with plural.  */
-	      if (plural)
-		retval = plural_lookup (domain, n, retval, retlen);
-
-	      __libc_rwlock_unlock (_nl_state_lock);
-	      return retval;
-	    }
-	}
-    }
-  /* NOTREACHED */
-}
-
-
-char *
-internal_function
-_nl_find_msg (domain_file, domainbinding, msgid, lengthp)
-     struct loaded_l10nfile *domain_file;
-     struct binding *domainbinding;
-     const char *msgid;
-     size_t *lengthp;
-{
-  struct loaded_domain *domain;
-  size_t act;
-  char *result;
-  size_t resultlen;
-
-  if (domain_file->decided == 0)
-    _nl_load_domain (domain_file, domainbinding);
-
-  if (domain_file->data == NULL)
-    return NULL;
-
-  domain = (struct loaded_domain *) domain_file->data;
-
-  /* Locate the MSGID and its translation.  */
-  if (domain->hash_size > 2 && domain->hash_tab != NULL)
-    {
-      /* Use the hashing table.  */
-      nls_uint32 len = strlen (msgid);
-      nls_uint32 hash_val = hash_string (msgid);
-      nls_uint32 idx = hash_val % domain->hash_size;
-      nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
-
-      while (1)
-	{
-	  nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
-
-	  if (nstr == 0)
-	    /* Hash table entry is empty.  */
-	    return NULL;
-
-	  /* Compare msgid with the original string at index nstr-1.
-	     We compare the lengths with >=, not ==, because plural entries
-	     are represented by strings with an embedded NUL.  */
-	  if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) >= len
-	      && (strcmp (msgid,
-			  domain->data + W (domain->must_swap,
-					    domain->orig_tab[nstr - 1].offset))
-		  == 0))
-	    {
-	      act = nstr - 1;
-	      goto found;
-	    }
-
-	  if (idx >= domain->hash_size - incr)
-	    idx -= domain->hash_size - incr;
-	  else
-	    idx += incr;
-	}
-      /* NOTREACHED */
-    }
-  else
-    {
-      /* Try the default method:  binary search in the sorted array of
-	 messages.  */
-      size_t top, bottom;
-
-      bottom = 0;
-      top = domain->nstrings;
-      while (bottom < top)
-	{
-	  int cmp_val;
-
-	  act = (bottom + top) / 2;
-	  cmp_val = strcmp (msgid, (domain->data
-				    + W (domain->must_swap,
-					 domain->orig_tab[act].offset)));
-	  if (cmp_val < 0)
-	    top = act;
-	  else if (cmp_val > 0)
-	    bottom = act + 1;
-	  else
-	    goto found;
-	}
-      /* No translation was found.  */
-      return NULL;
-    }
-
- found:
-  /* The translation was found at index ACT.  If we have to convert the
-     string to use a different character set, this is the time.  */
-  result = ((char *) domain->data
-	    + W (domain->must_swap, domain->trans_tab[act].offset));
-  resultlen = W (domain->must_swap, domain->trans_tab[act].length) + 1;
-
-#if defined _LIBC || HAVE_ICONV
-  if (domain->codeset_cntr
-      != (domainbinding != NULL ? domainbinding->codeset_cntr : 0))
-    {
-      /* The domain's codeset has changed through bind_textdomain_codeset()
-	 since the message catalog was initialized or last accessed.  We
-	 have to reinitialize the converter.  */
-      _nl_free_domain_conv (domain);
-      _nl_init_domain_conv (domain_file, domain, domainbinding);
-    }
-
-  if (
-# ifdef _GLIBC
-      domain->conv != (__gconv_t) -1
-# else
-#  if HAVE_ICONV
-      domain->conv != (iconv_t) -1
-#  endif
-# endif
-      )
-    {
-      /* We are supposed to do a conversion.  First allocate an
-	 appropriate table with the same structure as the table
-	 of translations in the file, where we can put the pointers
-	 to the converted strings in.
-	 There is a slight complication with plural entries.  They
-	 are represented by consecutive NUL terminated strings.  We
-	 handle this case by converting RESULTLEN bytes, including
-	 NULs.  */
-
-      if (domain->conv_tab == NULL
-	  && ((domain->conv_tab = (char **) calloc (domain->nstrings,
-						    sizeof (char *)))
-	      == NULL))
-	/* Mark that we didn't succeed allocating a table.  */
-	domain->conv_tab = (char **) -1;
-
-      if (__builtin_expect (domain->conv_tab == (char **) -1, 0))
-	/* Nothing we can do, no more memory.  */
-	goto converted;
-
-      if (domain->conv_tab[act] == NULL)
-	{
-	  /* We haven't used this string so far, so it is not
-	     translated yet.  Do this now.  */
-	  /* We use a bit more efficient memory handling.
-	     We allocate always larger blocks which get used over
-	     time.  This is faster than many small allocations.   */
-	  __libc_lock_define_initialized (static, lock)
-# define INITIAL_BLOCK_SIZE	4080
-	  static unsigned char *freemem;
-	  static size_t freemem_size;
-
-	  const unsigned char *inbuf;
-	  unsigned char *outbuf;
-	  int malloc_count;
-# ifndef _LIBC
-	  transmem_block_t *transmem_list = NULL;
-# endif
-
-	  __libc_lock_lock (lock);
-
-	  inbuf = (const unsigned char *) result;
-	  outbuf = freemem + sizeof (size_t);
-
-	  malloc_count = 0;
-	  while (1)
-	    {
-	      transmem_block_t *newmem;
-# ifdef _GLIBC
-	      size_t non_reversible;
-	      int res;
-
-	      if (freemem_size < sizeof (size_t))
-		goto resize_freemem;
-
-	      res = __gconv (domain->conv,
-			     &inbuf, inbuf + resultlen,
-			     &outbuf,
-			     outbuf + freemem_size - sizeof (size_t),
-			     &non_reversible);
-
-	      if (res == __GCONV_OK || res == __GCONV_EMPTY_INPUT)
-		break;
-
-	      if (res != __GCONV_FULL_OUTPUT)
-		{
-		  __libc_lock_unlock (lock);
-		  goto converted;
-		}
-
-	      inbuf = result;
-# else
-#  if HAVE_ICONV
-	      const char *inptr = (const char *) inbuf;
-	      size_t inleft = resultlen;
-	      char *outptr = (char *) outbuf;
-	      size_t outleft;
-
-	      if (freemem_size < sizeof (size_t))
-		goto resize_freemem;
-
-	      outleft = freemem_size - sizeof (size_t);
-	      if (iconv (domain->conv,
-			 (char **) &inptr, &inleft,
-			 &outptr, &outleft)
-		  != (size_t) (-1))
-		{
-		  outbuf = (unsigned char *) outptr;
-		  break;
-		}
-	      if (errno != E2BIG)
-		{
-		  __libc_lock_unlock (lock);
-		  goto converted;
-		}
-#  endif
-# endif
-
-	    resize_freemem:
-	      /* We must allocate a new buffer or resize the old one.  */
-	      if (malloc_count > 0)
-		{
-		  ++malloc_count;
-		  freemem_size = malloc_count * INITIAL_BLOCK_SIZE;
-		  newmem = (transmem_block_t *) realloc (transmem_list,
-							 freemem_size);
-# ifdef _LIBC
-		  if (newmem != NULL)
-		    transmem_list = transmem_list->next;
-		  else
-		    {
-		      struct transmem_list *old = transmem_list;
-
-		      transmem_list = transmem_list->next;
-		      free (old);
-		    }
-# endif
-		}
-	      else
-		{
-		  malloc_count = 1;
-		  freemem_size = INITIAL_BLOCK_SIZE;
-		  newmem = (transmem_block_t *) malloc (freemem_size);
-		}
-	      if (__builtin_expect (newmem == NULL, 0))
-		{
-		  freemem = NULL;
-		  freemem_size = 0;
-		  __libc_lock_unlock (lock);
-		  goto converted;
-		}
-
-# ifdef _LIBC
-	      /* Add the block to the list of blocks we have to free
-                 at some point.  */
-	      newmem->next = transmem_list;
-	      transmem_list = newmem;
-
-	      freemem = newmem->data;
-	      freemem_size -= offsetof (struct transmem_list, data);
-# else
-	      transmem_list = newmem;
-	      freemem = newmem;
-# endif
-
-	      outbuf = freemem + sizeof (size_t);
-	    }
-
-	  /* We have now in our buffer a converted string.  Put this
-	     into the table of conversions.  */
-	  *(size_t *) freemem = outbuf - freemem - sizeof (size_t);
-	  domain->conv_tab[act] = (char *) freemem;
-	  /* Shrink freemem, but keep it aligned.  */
-	  freemem_size -= outbuf - freemem;
-	  freemem = outbuf;
-	  freemem += freemem_size & (alignof (size_t) - 1);
-	  freemem_size = freemem_size & ~ (alignof (size_t) - 1);
-
-	  __libc_lock_unlock (lock);
-	}
-
-      /* Now domain->conv_tab[act] contains the translation of all
-	 the plural variants.  */
-      result = domain->conv_tab[act] + sizeof (size_t);
-      resultlen = *(size_t *) domain->conv_tab[act];
-    }
-
- converted:
-  /* The result string is converted.  */
-
-#endif /* _LIBC || HAVE_ICONV */
-
-  *lengthp = resultlen;
-  return result;
-}
-
-
-/* Look up a plural variant.  */
-static char *
-internal_function
-plural_lookup (domain, n, translation, translation_len)
-     struct loaded_l10nfile *domain;
-     unsigned long int n;
-     const char *translation;
-     size_t translation_len;
-{
-  struct loaded_domain *domaindata = (struct loaded_domain *) domain->data;
-  unsigned long int index;
-  const char *p;
-
-  index = plural_eval (domaindata->plural, n);
-  if (index >= domaindata->nplurals)
-    /* This should never happen.  It means the plural expression and the
-       given maximum value do not match.  */
-    index = 0;
-
-  /* Skip INDEX strings at TRANSLATION.  */
-  p = translation;
-  while (index-- > 0)
-    {
-#ifdef _GLIBC
-      p = __rawmemchr (p, '\0');
-#else
-      p = strchr (p, '\0');
-#endif
-      /* And skip over the NUL byte.  */
-      p++;
-
-      if (p >= translation + translation_len)
-	/* This should never happen.  It means the plural expression
-	   evaluated to a value larger than the number of variants
-	   available for MSGID1.  */
-	return (char *) translation;
-    }
-  return (char *) p;
-}
-
-
-/* Function to evaluate the plural expression and return an index value.  */
-static unsigned long int
-internal_function
-plural_eval (pexp, n)
-     struct expression *pexp;
-     unsigned long int n;
-{
-  switch (pexp->nargs)
-    {
-    case 0:
-      switch (pexp->operation)
-	{
-	case var:
-	  return n;
-	case num:
-	  return pexp->val.num;
-	default:
-	  break;
-	}
-      /* NOTREACHED */
-      break;
-    case 1:
-      {
-	/* pexp->operation must be lnot.  */
-	unsigned long int arg = plural_eval (pexp->val.args[0], n);
-	return ! arg;
-      }
-    case 2:
-      {
-	unsigned long int leftarg = plural_eval (pexp->val.args[0], n);
-	if (pexp->operation == lor)
-	  return leftarg || plural_eval (pexp->val.args[1], n);
-	else if (pexp->operation == land)
-	  return leftarg && plural_eval (pexp->val.args[1], n);
-	else
-	  {
-	    unsigned long int rightarg = plural_eval (pexp->val.args[1], n);
-
-	    switch (pexp->operation)
-	      {
-	      case mult:
-		return leftarg * rightarg;
-	      case divide:
-		return leftarg / rightarg;
-	      case module:
-		return leftarg % rightarg;
-	      case plus:
-		return leftarg + rightarg;
-	      case minus:
-		return leftarg - rightarg;
-	      case less_than:
-		return leftarg < rightarg;
-	      case greater_than:
-		return leftarg > rightarg;
-	      case less_or_equal:
-		return leftarg <= rightarg;
-	      case greater_or_equal:
-		return leftarg >= rightarg;
-	      case equal:
-		return leftarg == rightarg;
-	      case not_equal:
-		return leftarg != rightarg;
-	      default:
-		break;
-	      }
-	  }
-	/* NOTREACHED */
-	break;
-      }
-    case 3:
-      {
-	/* pexp->operation must be qmop.  */
-	unsigned long int boolarg = plural_eval (pexp->val.args[0], n);
-	return plural_eval (pexp->val.args[boolarg ? 1 : 2], n);
-      }
-    }
-  /* NOTREACHED */
-  return 0;
-}
-
-
-/* Return string representation of locale CATEGORY.  */
-static const char *
-internal_function
-category_to_name (category)
-     int category;
-{
-  const char *retval;
-
-  switch (category)
-  {
-#ifdef LC_COLLATE
-  case LC_COLLATE:
-    retval = "LC_COLLATE";
-    break;
-#endif
-#ifdef LC_CTYPE
-  case LC_CTYPE:
-    retval = "LC_CTYPE";
-    break;
-#endif
-#ifdef LC_MONETARY
-  case LC_MONETARY:
-    retval = "LC_MONETARY";
-    break;
-#endif
-#ifdef LC_NUMERIC
-  case LC_NUMERIC:
-    retval = "LC_NUMERIC";
-    break;
-#endif
-#ifdef LC_TIME
-  case LC_TIME:
-    retval = "LC_TIME";
-    break;
-#endif
-#ifdef LC_MESSAGES
-  case LC_MESSAGES:
-    retval = "LC_MESSAGES";
-    break;
-#endif
-#ifdef LC_RESPONSE
-  case LC_RESPONSE:
-    retval = "LC_RESPONSE";
-    break;
-#endif
-#ifdef LC_ALL
-  case LC_ALL:
-    /* This might not make sense but is perhaps better than any other
-       value.  */
-    retval = "LC_ALL";
-    break;
-#endif
-  default:
-    /* If you have a better idea for a default value let me know.  */
-    retval = "LC_XXX";
-  }
-
-  return retval;
-}
-
-/* Guess value of current locale from value of the environment variables.  */
-static const char *
-internal_function
-guess_category_value (category, categoryname)
-     int category;
-     const char *categoryname;
-{
-  const char *language;
-  const char *retval;
-
-  /* The highest priority value is the `LANGUAGE' environment
-     variable.  But we don't use the value if the currently selected
-     locale is the C locale.  This is a GNU extension.  */
-  language = getenv ("LANGUAGE");
-  if (language != NULL && language[0] == '\0')
-    language = NULL;
-
-  /* We have to proceed with the POSIX methods of looking to `LC_ALL',
-     `LC_xxx', and `LANG'.  On some systems this can be done by the
-     `setlocale' function itself.  */
-#if defined _LIBC || (defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL)
-  retval = setlocale (category, NULL);
-#else
-  /* Setting of LC_ALL overwrites all other.  */
-  retval = getenv ("LC_ALL");
-  if (retval == NULL || retval[0] == '\0')
-    {
-      /* Next comes the name of the desired category.  */
-      retval = getenv (categoryname);
-      if (retval == NULL || retval[0] == '\0')
-	{
-	  /* Last possibility is the LANG environment variable.  */
-	  retval = getenv ("LANG");
-	  if (retval == NULL || retval[0] == '\0')
-	    /* We use C as the default domain.  POSIX says this is
-	       implementation defined.  */
-	    return "C";
-	}
-    }
-#endif
-
-  return language != NULL && strcmp (retval, "C") != 0 ? language : retval;
-}
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_GLIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif
-
-#if !_LIBC && !HAVE_MEMPCPY
-static void *
-mempcpy (dest, src, n)
-     void *dest;
-     const void *src;
-     size_t n;
-{
-  return (void *) ((char *) memcpy (dest, src, n) + n);
-}
-#endif
-
-
-#ifdef _LIBC
-/* If we want to free all resources we have to do some work at
-   program's end.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  void *old;
-
-  while (_nl_domain_bindings != NULL)
-    {
-      struct binding *oldp = _nl_domain_bindings;
-      _nl_domain_bindings = _nl_domain_bindings->next;
-      if (oldp->dirname != _nl_default_dirname)
-	/* Yes, this is a pointer comparison.  */
-	free (oldp->dirname);
-      free (oldp->codeset);
-      free (oldp);
-    }
-
-  if (_nl_current_default_domain != _nl_default_default_domain)
-    /* Yes, again a pointer comparison.  */
-    free ((char *) _nl_current_default_domain);
-
-  /* Remove the search tree with the known translations.  */
-  tdestroy (root, free);
-  root = NULL;
-
-  while (transmem_list != NULL)
-    {
-      old = transmem_list;
-      transmem_list = transmem_list->next;
-      free (old);
-    }
-}
-
-text_set_element (__libc_subfreeres, free_mem);
-#endif
-#else  /* !MB_CAPABLE */
-
-#include <machine/weakalias.h>
-#include <sys/lock.h>
-
-/* Name of the default domain used for gettext(3) prior any call to
-   textdomain(3).  The default value for this is "messages".  */
-const char _nl_default_default_domain[] = "messages";
-
-/* Value used as the default domain for gettext(3).  */
-const char *_nl_current_default_domain = _nl_default_default_domain;
-
-/* Contains the default location of the message catalogs.  */
-const char _nl_default_dirname[] = LOCALEDIR;
-
-/* List with bindings of specific domains created by bindtextdomain()
-   calls.  */
-struct binding *_nl_domain_bindings;
-
-/* this is actually usually defined in loadmsgcat.c, but we do it
-   here so we don't need the other file at all. */
-int _nl_msg_cat_cntr;
-
-/* Lock variable to protect the global data in the gettext implementation.  */
-__libc_rwlock_define_initialized (, _nl_state_lock)
-
-
-/* For non-MB-capable programs, the locale must be "C", so we can
-   avoid excess program size by short-circuiting this function. */
-char *
-__dcigettext (domainname, msgid1, msgid2, plural, n, category)
-     const char *domainname;
-     const char *msgid1;
-     const char *msgid2;
-     int plural;
-     unsigned long int n;
-     int category;
-{
-  if (plural && n > 1)
-    return msgid2;
-  return msgid1;
-}
-weak_alias(__dcigettext, dcigettext)
-
-#endif /* !MB_CAPABLE */
diff --git a/newlib/libc/sys/linux/intl/dcngettext.c b/newlib/libc/sys/linux/intl/dcngettext.c
deleted file mode 100644
index 068d5fa3f..000000000
--- a/newlib/libc/sys/linux/intl/dcngettext.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Implementation of the dcngettext(3) function.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DCNGETTEXT __dcngettext
-# define DCIGETTEXT __dcigettext
-#else
-# define DCNGETTEXT dcngettext__
-# define DCIGETTEXT dcigettext__
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-   locale.  */
-char *
-DCNGETTEXT (domainname, msgid1, msgid2, n, category)
-     const char *domainname;
-     const char *msgid1;
-     const char *msgid2;
-     unsigned long int n;
-     int category;
-{
-  return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dcngettext, dcngettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/dgettext.c b/newlib/libc/sys/linux/intl/dgettext.c
deleted file mode 100644
index d0e5ed2b2..000000000
--- a/newlib/libc/sys/linux/intl/dgettext.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Implementation of the dgettext(3) function.
-   Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DGETTEXT __dgettext
-# define DCGETTEXT __dcgettext
-#else
-# define DGETTEXT dgettext__
-# define DCGETTEXT dcgettext__
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog of the current
-   LC_MESSAGES locale.  */
-char *
-DGETTEXT (domainname, msgid)
-     const char *domainname;
-     const char *msgid;
-{
-  return DCGETTEXT (domainname, msgid, LC_MESSAGES);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dgettext, dgettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/dngettext.c b/newlib/libc/sys/linux/intl/dngettext.c
deleted file mode 100644
index a620024b6..000000000
--- a/newlib/libc/sys/linux/intl/dngettext.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* Implementation of the dngettext(3) function.
-   Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DNGETTEXT __dngettext
-# define DCNGETTEXT __dcngettext
-#else
-# define DNGETTEXT dngettext__
-# define DCNGETTEXT dcngettext__
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog of the current
-   LC_MESSAGES locale and skip message according to the plural form.  */
-char *
-DNGETTEXT (domainname, msgid1, msgid2, n)
-     const char *domainname;
-     const char *msgid1;
-     const char *msgid2;
-     unsigned long int n;
-{
-  return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dngettext, dngettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/explodename.c b/newlib/libc/sys/linux/intl/explodename.c
deleted file mode 100644
index d36b045bb..000000000
--- a/newlib/libc/sys/linux/intl/explodename.c
+++ /dev/null
@@ -1,204 +0,0 @@
-#ifdef MB_CAPABLE
-
-/* Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#include <sys/types.h>
-
-#include "loadinfo.h"
-
-/* On some strange systems still no definition of NULL is found.  Sigh!  */
-#ifndef NULL
-# if defined __STDC__ && __STDC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL 0
-# endif
-#endif
-
-/* @@ end of prolog @@ */
-
-char *
-_nl_find_language (name)
-     const char *name;
-{
-  while (name[0] != '\0' && name[0] != '_' && name[0] != '@'
-	 && name[0] != '+' && name[0] != ',')
-    ++name;
-
-  return (char *) name;
-}
-
-
-int
-_nl_explode_name (name, language, modifier, territory, codeset,
-		  normalized_codeset, special, sponsor, revision)
-     char *name;
-     const char **language;
-     const char **modifier;
-     const char **territory;
-     const char **codeset;
-     const char **normalized_codeset;
-     const char **special;
-     const char **sponsor;
-     const char **revision;
-{
-  enum { undecided, xpg, cen } syntax;
-  char *cp;
-  int mask;
-
-  *modifier = NULL;
-  *territory = NULL;
-  *codeset = NULL;
-  *normalized_codeset = NULL;
-  *special = NULL;
-  *sponsor = NULL;
-  *revision = NULL;
-
-  /* Now we determine the single parts of the locale name.  First
-     look for the language.  Termination symbols are `_' and `@' if
-     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
-  mask = 0;
-  syntax = undecided;
-  *language = cp = name;
-  cp = _nl_find_language (*language);
-
-  if (*language == cp)
-    /* This does not make sense: language has to be specified.  Use
-       this entry as it is without exploding.  Perhaps it is an alias.  */
-    cp = strchr (*language, '\0');
-  else if (cp[0] == '_')
-    {
-      /* Next is the territory.  */
-      cp[0] = '\0';
-      *territory = ++cp;
-
-      while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@'
-	     && cp[0] != '+' && cp[0] != ',' && cp[0] != '_')
-	++cp;
-
-      mask |= TERRITORY;
-
-      if (cp[0] == '.')
-	{
-	  /* Next is the codeset.  */
-	  syntax = xpg;
-	  cp[0] = '\0';
-	  *codeset = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != '@')
-	    ++cp;
-
-	  mask |= XPG_CODESET;
-
-	  if (*codeset != cp && (*codeset)[0] != '\0')
-	    {
-	      *normalized_codeset = _nl_normalize_codeset (*codeset,
-							   cp - *codeset);
-	      if (strcmp (*codeset, *normalized_codeset) == 0)
-		free ((char *) *normalized_codeset);
-	      else
-		mask |= XPG_NORM_CODESET;
-	    }
-	}
-    }
-
-  if (cp[0] == '@' || (syntax != xpg && cp[0] == '+'))
-    {
-      /* Next is the modifier.  */
-      syntax = cp[0] == '@' ? xpg : cen;
-      cp[0] = '\0';
-      *modifier = ++cp;
-
-      while (syntax == cen && cp[0] != '\0' && cp[0] != '+'
-	     && cp[0] != ',' && cp[0] != '_')
-	++cp;
-
-      mask |= XPG_MODIFIER | CEN_AUDIENCE;
-    }
-
-  if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_'))
-    {
-      syntax = cen;
-
-      if (cp[0] == '+')
-	{
- 	  /* Next is special application (CEN syntax).  */
-	  cp[0] = '\0';
-	  *special = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_')
-	    ++cp;
-
-	  mask |= CEN_SPECIAL;
-	}
-
-      if (cp[0] == ',')
-	{
- 	  /* Next is sponsor (CEN syntax).  */
-	  cp[0] = '\0';
-	  *sponsor = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != '_')
-	    ++cp;
-
-	  mask |= CEN_SPONSOR;
-	}
-
-      if (cp[0] == '_')
-	{
- 	  /* Next is revision (CEN syntax).  */
-	  cp[0] = '\0';
-	  *revision = ++cp;
-
-	  mask |= CEN_REVISION;
-	}
-    }
-
-  /* For CEN syntax values it might be important to have the
-     separator character in the file name, not for XPG syntax.  */
-  if (syntax == xpg)
-    {
-      if (*territory != NULL && (*territory)[0] == '\0')
-	mask &= ~TERRITORY;
-
-      if (*codeset != NULL && (*codeset)[0] == '\0')
-	mask &= ~XPG_CODESET;
-
-      if (*modifier != NULL && (*modifier)[0] == '\0')
-	mask &= ~XPG_MODIFIER;
-    }
-
-  return mask;
-}
-
-#endif /* MB_CAPABLE */
diff --git a/newlib/libc/sys/linux/intl/finddomain.c b/newlib/libc/sys/linux/intl/finddomain.c
deleted file mode 100644
index f64305776..000000000
--- a/newlib/libc/sys/linux/intl/finddomain.c
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifdef MB_CAPABLE
-
-/* Handle list of needed message catalogs
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Ulrich Drepper <drepper@gnu.org>, 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) (bcopy (Src, Dst, Num), (Dst))
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-/* @@ end of prolog @@ */
-/* List of already loaded domains.  */
-static struct loaded_l10nfile *_nl_loaded_domains;
-
-
-/* Return a data structure describing the message catalog described by
-   the DOMAINNAME and CATEGORY parameters with respect to the currently
-   established bindings.  */
-struct loaded_l10nfile *
-internal_function
-_nl_find_domain (dirname, locale, domainname, domainbinding)
-     const char *dirname;
-     char *locale;
-     const char *domainname;
-     struct binding *domainbinding;
-{
-  struct loaded_l10nfile *retval;
-  const char *language;
-  const char *modifier;
-  const char *territory;
-  const char *codeset;
-  const char *normalized_codeset;
-  const char *special;
-  const char *sponsor;
-  const char *revision;
-  const char *alias_value;
-  int mask;
-
-  /* LOCALE can consist of up to four recognized parts for the XPG syntax:
-
-		language[_territory[.codeset]][@modifier]
-
-     and six parts for the CEN syntax:
-
-	language[_territory][+audience][+special][,[sponsor][_revision]]
-
-     Beside the first part all of them are allowed to be missing.  If
-     the full specified locale is not found, the less specific one are
-     looked for.  The various parts will be stripped off according to
-     the following order:
-		(1) revision
-		(2) sponsor
-		(3) special
-		(4) codeset
-		(5) normalized codeset
-		(6) territory
-		(7) audience/modifier
-   */
-
-  /* If we have already tested for this locale entry there has to
-     be one data set in the list of loaded domains.  */
-  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
-			       strlen (dirname) + 1, 0, locale, NULL, NULL,
-			       NULL, NULL, NULL, NULL, NULL, domainname, 0);
-  if (retval != NULL)
-    {
-      /* We know something about this locale.  */
-      int cnt;
-
-      if (retval->decided == 0)
-	_nl_load_domain (retval, domainbinding);
-
-      if (retval->data != NULL)
-	return retval;
-
-      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
-	{
-	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt], domainbinding);
-
-	  if (retval->successor[cnt]->data != NULL)
-	    break;
-	}
-      return cnt >= 0 ? retval : NULL;
-      /* NOTREACHED */
-    }
-
-  /* See whether the locale value is an alias.  If yes its value
-     *overwrites* the alias name.  No test for the original value is
-     done.  */
-  alias_value = _nl_expand_alias (locale);
-  if (alias_value != NULL)
-    {
-#if defined _LIBC || defined HAVE_STRDUP
-      locale = strdup (alias_value);
-      if (locale == NULL)
-	return NULL;
-#else
-      size_t len = strlen (alias_value) + 1;
-      locale = (char *) malloc (len);
-      if (locale == NULL)
-	return NULL;
-
-      memcpy (locale, alias_value, len);
-#endif
-    }
-
-  /* Now we determine the single parts of the locale name.  First
-     look for the language.  Termination symbols are `_' and `@' if
-     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
-  mask = _nl_explode_name (locale, &language, &modifier, &territory,
-			   &codeset, &normalized_codeset, &special,
-			   &sponsor, &revision);
-
-  /* Create all possible locale entries which might be interested in
-     generalization.  */
-  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
-			       strlen (dirname) + 1, mask, language, territory,
-			       codeset, normalized_codeset, modifier, special,
-			       sponsor, revision, domainname, 1);
-  if (retval == NULL)
-    /* This means we are out of core.  */
-    return NULL;
-
-  if (retval->decided == 0)
-    _nl_load_domain (retval, domainbinding);
-  if (retval->data == NULL)
-    {
-      int cnt;
-      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
-	{
-	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt], domainbinding);
-	  if (retval->successor[cnt]->data != NULL)
-	    break;
-	}
-    }
-
-  /* The room for an alias was dynamically allocated.  Free it now.  */
-  if (alias_value != NULL)
-    free (locale);
-
-  /* The space for normalized_codeset is dynamically allocated.  Free it.  */
-  if (mask & XPG_NORM_CODESET)
-    free ((void *) normalized_codeset);
-
-  return retval;
-}
-
-
-#ifdef _LIBC
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  struct loaded_l10nfile *runp = _nl_loaded_domains;
-
-  while (runp != NULL)
-    {
-      struct loaded_l10nfile *here = runp;
-      if (runp->data != NULL)
-	_nl_unload_domain ((struct loaded_domain *) runp->data);
-      runp = runp->next;
-      free ((char *) here->filename);
-      free (here);
-    }
-}
-
-text_set_element (__libc_subfreeres, free_mem);
-#endif
-
-#endif /* MB_CAPABLE */
diff --git a/newlib/libc/sys/linux/intl/gettext.c b/newlib/libc/sys/linux/intl/gettext.c
deleted file mode 100644
index 2b107d558..000000000
--- a/newlib/libc/sys/linux/intl/gettext.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* Implementation of gettext(3) function.
-   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#ifdef _LIBC
-# define __need_NULL
-# include <stddef.h>
-#else
-# ifdef STDC_HEADERS
-#  include <stdlib.h>		/* Just for NULL.  */
-# else
-#  ifdef HAVE_STRING_H
-#   include <string.h>
-#  else
-#   define NULL ((void *) 0)
-#  endif
-# endif
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-#include <locale.h>
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define GETTEXT __gettext
-# define DCGETTEXT __dcgettext
-#else
-# define GETTEXT gettext__
-# define DCGETTEXT dcgettext__
-#endif
-
-/* Look up MSGID in the current default message catalog for the current
-   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
-   text).  */
-char *
-GETTEXT (msgid)
-     const char *msgid;
-{
-  return DCGETTEXT (NULL, msgid, LC_MESSAGES);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__gettext, gettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/gettext.h b/newlib/libc/sys/linux/intl/gettext.h
deleted file mode 100644
index c427d89d1..000000000
--- a/newlib/libc/sys/linux/intl/gettext.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* Internal header for GNU gettext internationalization functions.
-   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _GETTEXT_H
-#define _GETTEXT_H 1
-
-#if HAVE_LIMITS_H || _LIBC
-# include <limits.h>
-#endif
-
-/* @@ end of prolog @@ */
-
-/* The magic number of the GNU message catalog format.  */
-#define _MAGIC 0x950412de
-#define _MAGIC_SWAPPED 0xde120495
-
-/* Revision number of the currently used .mo (binary) file format.  */
-#define MO_REVISION_NUMBER 0
-
-/* The following contortions are an attempt to use the C preprocessor
-   to determine an unsigned integral type that is 32 bits wide.  An
-   alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
-   as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work
-   when cross-compiling.  */
-
-#if __STDC__
-# define UINT_MAX_32_BITS 4294967295U
-#else
-# define UINT_MAX_32_BITS 0xFFFFFFFF
-#endif
-
-/* If UINT_MAX isn't defined, assume it's a 32-bit type.
-   This should be valid for all systems GNU cares about because
-   that doesn't include 16-bit systems, and only modern systems
-   (that certainly have <limits.h>) have 64+-bit integral types.  */
-
-#ifndef UINT_MAX
-# define UINT_MAX UINT_MAX_32_BITS
-#endif
-
-#if UINT_MAX == UINT_MAX_32_BITS
-typedef unsigned nls_uint32;
-#else
-# if USHRT_MAX == UINT_MAX_32_BITS
-typedef unsigned short nls_uint32;
-# else
-#  if ULONG_MAX == UINT_MAX_32_BITS
-typedef unsigned long nls_uint32;
-#  else
-  /* The following line is intended to throw an error.  Using #error is
-     not portable enough.  */
-  "Cannot determine unsigned 32-bit data type."
-#  endif
-# endif
-#endif
-
-
-/* Header for binary .mo file format.  */
-struct mo_file_header
-{
-  /* The magic number.  */
-  nls_uint32 magic;
-  /* The revision number of the file format.  */
-  nls_uint32 revision;
-  /* The number of strings pairs.  */
-  nls_uint32 nstrings;
-  /* Offset of table with start offsets of original strings.  */
-  nls_uint32 orig_tab_offset;
-  /* Offset of table with start offsets of translation strings.  */
-  nls_uint32 trans_tab_offset;
-  /* Size of hashing table.  */
-  nls_uint32 hash_tab_size;
-  /* Offset of first hashing entry.  */
-  nls_uint32 hash_tab_offset;
-};
-
-struct string_desc
-{
-  /* Length of addressed string.  */
-  nls_uint32 length;
-  /* Offset of string in file.  */
-  nls_uint32 offset;
-};
-
-/* @@ begin of epilog @@ */
-
-#endif	/* gettext.h  */
diff --git a/newlib/libc/sys/linux/intl/gettextP.h b/newlib/libc/sys/linux/intl/gettextP.h
deleted file mode 100644
index 6c9035bc1..000000000
--- a/newlib/libc/sys/linux/intl/gettextP.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/* Header describing internals of libintl library.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _GETTEXTP_H
-#define _GETTEXTP_H
-
-#include <stddef.h>		/* Get size_t.  */
-#include <libc-symbols.h>
-
-#ifdef _GLIBC
-# include "gconv_int.h"
-#else
-# if HAVE_ICONV
-#  include <iconv.h>
-# endif
-#endif
-
-#include "loadinfo.h"
-
-#include "gettext.h"		/* Get nls_uint32.  */
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-/* Tell the compiler when a conditional or integer expression is
-   almost always true or almost always false.  */
-#ifndef HAVE_BUILTIN_EXPECT
-# define __builtin_expect(expr, val) (expr)
-#endif
-
-#ifndef W
-# define W(flag, data) ((flag) ? SWAP (data) : (data))
-#endif
-
-
-#ifdef _LIBC
-# include <byteswap.h>
-# define SWAP(i) bswap_32 (i)
-#else
-static nls_uint32 SWAP PARAMS ((nls_uint32 i));
-
-static inline nls_uint32
-SWAP (i)
-     nls_uint32 i;
-{
-  return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
-}
-#endif
-
-
-/* This is the representation of the expressions to determine the
-   plural form.  */
-struct expression
-{
-  int nargs;			/* Number of arguments.  */
-  enum operator
-  {
-    /* Without arguments:  */
-    var,			/* The variable "n".  */
-    num,			/* Decimal number.  */
-    /* Unary operators:  */
-    lnot,			/* Logical NOT.  */
-    /* Binary operators:  */
-    mult,			/* Multiplication.  */
-    divide,			/* Division.  */
-    module,			/* Module operation.  */
-    plus,			/* Addition.  */
-    minus,			/* Subtraction.  */
-    less_than,			/* Comparison.  */
-    greater_than,		/* Comparison.  */
-    less_or_equal,		/* Comparison.  */
-    greater_or_equal,		/* Comparison.  */
-    equal,			/* Comparision for equality.  */
-    not_equal,			/* Comparision for inequality.  */
-    land,			/* Logical AND.  */
-    lor,			/* Logical OR.  */
-    /* Ternary operators:  */
-    qmop			/* Question mark operator.  */
-  } operation;
-  union
-  {
-    unsigned long int num;	/* Number value for `num'.  */
-    struct expression *args[3];	/* Up to three arguments.  */
-  } val;
-};
-
-/* This is the data structure to pass information to the parser and get
-   the result in a thread-safe way.  */
-struct parse_args
-{
-  const char *cp;
-  struct expression *res;
-};
-
-
-/* The representation of an opened message catalog.  */
-struct loaded_domain
-{
-  const char *data;
-  int use_mmap;
-  size_t mmap_size;
-  int must_swap;
-  nls_uint32 nstrings;
-  struct string_desc *orig_tab;
-  struct string_desc *trans_tab;
-  nls_uint32 hash_size;
-  nls_uint32 *hash_tab;
-  int codeset_cntr;
-#ifdef _GLIBC
-  __gconv_t conv;
-#else
-# if HAVE_ICONV
-  iconv_t conv;
-# endif
-#endif
-  char **conv_tab;
-
-  struct expression *plural;
-  unsigned long int nplurals;
-};
-
-/* We want to allocate a string at the end of the struct.  But ISO C
-   doesn't allow zero sized arrays.  */
-#ifdef __GNUC__
-# define ZERO 0
-#else
-# define ZERO 1
-#endif
-
-/* A set of settings bound to a message domain.  Used to store settings
-   from bindtextdomain() and bind_textdomain_codeset().  */
-struct binding
-{
-  struct binding *next;
-  char *dirname;
-  int codeset_cntr;	/* Incremented each time codeset changes.  */
-  char *codeset;
-  char domainname[ZERO];
-};
-
-/* A counter which is incremented each time some previous translations
-   become invalid.
-   This variable is part of the external ABI of the GNU libintl.  */
-extern int _nl_msg_cat_cntr;
-
-struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
-						 char *__locale,
-						 const char *__domainname,
-					      struct binding *__domainbinding))
-     internal_function;
-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain,
-			      struct binding *__domainbinding))
-     internal_function;
-void _nl_unload_domain PARAMS ((struct loaded_domain *__domain))
-     internal_function;
-const char *_nl_init_domain_conv PARAMS ((struct loaded_l10nfile *__domain_file,
-					  struct loaded_domain *__domain,
-					  struct binding *__domainbinding))
-     internal_function;
-void _nl_free_domain_conv PARAMS ((struct loaded_domain *__domain))
-     internal_function;
-
-char *_nl_find_msg PARAMS ((struct loaded_l10nfile *domain_file,
-			    struct binding *domainbinding,
-			    const char *msgid, size_t *lengthp))
-     internal_function;
-
-#ifdef _LIBC
-extern char *__gettext PARAMS ((const char *__msgid));
-extern char *__dgettext PARAMS ((const char *__domainname,
-				 const char *__msgid));
-extern char *__dcgettext PARAMS ((const char *__domainname,
-				  const char *__msgid, int __category));
-extern char *__ngettext PARAMS ((const char *__msgid1, const char *__msgid2,
-				 unsigned long int __n));
-extern char *__dngettext PARAMS ((const char *__domainname,
-				  const char *__msgid1, const char *__msgid2,
-				  unsigned long int n));
-extern char *__dcngettext PARAMS ((const char *__domainname,
-				   const char *__msgid1, const char *__msgid2,
-				   unsigned long int __n, int __category));
-extern char *__dcigettext PARAMS ((const char *__domainname,
-				   const char *__msgid1, const char *__msgid2,
-				   int __plural, unsigned long int __n,
-				   int __category));
-extern char *__textdomain PARAMS ((const char *__domainname));
-extern char *__bindtextdomain PARAMS ((const char *__domainname,
-				       const char *__dirname));
-extern char *__bind_textdomain_codeset PARAMS ((const char *__domainname,
-						const char *__codeset));
-#else
-extern char *gettext__ PARAMS ((const char *__msgid));
-extern char *dgettext__ PARAMS ((const char *__domainname,
-				 const char *__msgid));
-extern char *dcgettext__ PARAMS ((const char *__domainname,
-				  const char *__msgid, int __category));
-extern char *ngettext__ PARAMS ((const char *__msgid1, const char *__msgid2,
-				 unsigned long int __n));
-extern char *dngettext__ PARAMS ((const char *__domainname,
-				  const char *__msgid1, const char *__msgid2,
-				  unsigned long int __n));
-extern char *dcngettext__ PARAMS ((const char *__domainname,
-				   const char *__msgid1, const char *__msgid2,
-				   unsigned long int __n, int __category));
-extern char *dcigettext__ PARAMS ((const char *__domainname,
-				   const char *__msgid1, const char *__msgid2,
-				   int __plural, unsigned long int __n,
-				   int __category));
-extern char *textdomain__ PARAMS ((const char *__domainname));
-extern char *bindtextdomain__ PARAMS ((const char *__domainname,
-				       const char *__dirname));
-extern char *bind_textdomain_codeset__ PARAMS ((const char *__domainname,
-						const char *__codeset));
-#endif
-
-#ifdef _LIBC
-extern void __gettext_free_exp PARAMS ((struct expression *exp))
-     internal_function;
-extern int __gettextparse PARAMS ((void *arg));
-#else
-extern void gettext_free_exp__ PARAMS ((struct expression *exp))
-     internal_function;
-extern int gettextparse__ PARAMS ((void *arg));
-#endif
-
-/* @@ begin of epilog @@ */
-
-#endif /* gettextP.h  */
diff --git a/newlib/libc/sys/linux/intl/hash-string.h b/newlib/libc/sys/linux/intl/hash-string.h
deleted file mode 100644
index ae4bcfb3e..000000000
--- a/newlib/libc/sys/linux/intl/hash-string.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Implements a string hashing function.
-   Copyright (C) 1995, 1997, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-/* We assume to have `unsigned long int' value with at least 32 bits.  */
-#define HASHWORDBITS 32
-
-
-/* Defines the so called `hashpjw' function by P.J. Weinberger
-   [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
-   1986, 1987 Bell Telephone Laboratories, Inc.]  */
-static unsigned long int hash_string PARAMS ((const char *__str_param));
-
-static inline unsigned long int
-hash_string (str_param)
-     const char *str_param;
-{
-  unsigned long int hval, g;
-  const char *str = str_param;
-
-  /* Compute the hash value for the given string.  */
-  hval = 0;
-  while (*str != '\0')
-    {
-      hval <<= 4;
-      hval += (unsigned long int) *str++;
-      g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
-      if (g != 0)
-	{
-	  hval ^= g >> (HASHWORDBITS - 8);
-	  hval ^= g;
-	}
-    }
-  return hval;
-}
diff --git a/newlib/libc/sys/linux/intl/l10nflist.c b/newlib/libc/sys/linux/intl/l10nflist.c
deleted file mode 100644
index 1a5cf1e0c..000000000
--- a/newlib/libc/sys/linux/intl/l10nflist.c
+++ /dev/null
@@ -1,421 +0,0 @@
-#ifdef MB_CAPABLE
-
-/* Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Tell glibc's <string.h> to provide a prototype for stpcpy().
-   This must come before <config.h> because <config.h> may include
-   <features.h>, and once <features.h> has been included, it's too late.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE	1
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) (bcopy (Src, Dst, Num), (Dst))
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined _LIBC || defined HAVE_ARGZ_H
-# include <argz.h>
-#endif
-#include <ctype.h>
-#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#include "loadinfo.h"
-
-/* On some strange systems still no definition of NULL is found.  Sigh!  */
-#ifndef NULL
-# if defined __STDC__ && __STDC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL 0
-# endif
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifdef _GLIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# ifndef stpcpy
-#  define stpcpy(dest, src) __stpcpy(dest, src)
-# endif
-#else
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-#endif
-
-/* Define function which are usually not available.  */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_COUNT
-/* Returns the number of strings in ARGZ.  */
-static size_t argz_count__ PARAMS ((const char *argz, size_t len));
-
-static size_t
-argz_count__ (argz, len)
-     const char *argz;
-     size_t len;
-{
-  size_t count = 0;
-  while (len > 0)
-    {
-      size_t part_len = strlen (argz);
-      argz += part_len + 1;
-      len -= part_len + 1;
-      count++;
-    }
-  return count;
-}
-# undef __argz_count
-# define __argz_count(argz, len) argz_count__ (argz, len)
-#endif	/* !_LIBC && !HAVE___ARGZ_COUNT */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
-/* Make '\0' separated arg vector ARGZ printable by converting all the '\0's
-   except the last into the character SEP.  */
-static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep));
-
-static void
-argz_stringify__ (argz, len, sep)
-     char *argz;
-     size_t len;
-     int sep;
-{
-  while (len > 0)
-    {
-      size_t part_len = strlen (argz);
-      argz += part_len;
-      len -= part_len + 1;
-      if (len > 0)
-	*argz++ = sep;
-    }
-}
-# undef __argz_stringify
-# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
-#endif	/* !_LIBC && !HAVE___ARGZ_STRINGIFY */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_NEXT
-static char *argz_next__ PARAMS ((char *argz, size_t argz_len,
-				  const char *entry));
-
-static char *
-argz_next__ (argz, argz_len, entry)
-     char *argz;
-     size_t argz_len;
-     const char *entry;
-{
-  if (entry)
-    {
-      if (entry < argz + argz_len)
-        entry = strchr (entry, '\0') + 1;
-
-      return entry >= argz + argz_len ? NULL : (char *) entry;
-    }
-  else
-    if (argz_len > 0)
-      return argz;
-    else
-      return 0;
-}
-# undef __argz_next
-# define __argz_next(argz, len, entry) argz_next__ (argz, len, entry)
-#endif	/* !_LIBC && !HAVE___ARGZ_NEXT */
-
-
-/* Return number of bits set in X.  */
-static int pop PARAMS ((int x));
-
-static inline int
-pop (x)
-     int x;
-{
-  /* We assume that no more than 16 bits are used.  */
-  x = ((x & ~0x5555) >> 1) + (x & 0x5555);
-  x = ((x & ~0x3333) >> 2) + (x & 0x3333);
-  x = ((x >> 4) + x) & 0x0f0f;
-  x = ((x >> 8) + x) & 0xff;
-
-  return x;
-}
-
-
-struct loaded_l10nfile *
-_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
-		    territory, codeset, normalized_codeset, modifier, special,
-		    sponsor, revision, filename, do_allocate)
-     struct loaded_l10nfile **l10nfile_list;
-     const char *dirlist;
-     size_t dirlist_len;
-     int mask;
-     const char *language;
-     const char *territory;
-     const char *codeset;
-     const char *normalized_codeset;
-     const char *modifier;
-     const char *special;
-     const char *sponsor;
-     const char *revision;
-     const char *filename;
-     int do_allocate;
-{
-  char *abs_filename;
-  struct loaded_l10nfile *last = NULL;
-  struct loaded_l10nfile *retval;
-  char *cp;
-  size_t entries;
-  int cnt;
-
-  /* Allocate room for the full file name.  */
-  abs_filename = (char *) malloc (dirlist_len
-				  + strlen (language)
-				  + ((mask & TERRITORY) != 0
-				     ? strlen (territory) + 1 : 0)
-				  + ((mask & XPG_CODESET) != 0
-				     ? strlen (codeset) + 1 : 0)
-				  + ((mask & XPG_NORM_CODESET) != 0
-				     ? strlen (normalized_codeset) + 1 : 0)
-				  + (((mask & XPG_MODIFIER) != 0
-				      || (mask & CEN_AUDIENCE) != 0)
-				     ? strlen (modifier) + 1 : 0)
-				  + ((mask & CEN_SPECIAL) != 0
-				     ? strlen (special) + 1 : 0)
-				  + (((mask & CEN_SPONSOR) != 0
-				      || (mask & CEN_REVISION) != 0)
-				     ? (1 + ((mask & CEN_SPONSOR) != 0
-					     ? strlen (sponsor) + 1 : 0)
-					+ ((mask & CEN_REVISION) != 0
-					   ? strlen (revision) + 1 : 0)) : 0)
-				  + 1 + strlen (filename) + 1);
-
-  if (abs_filename == NULL)
-    return NULL;
-
-  retval = NULL;
-  last = NULL;
-
-  /* Construct file name.  */
-  memcpy (abs_filename, dirlist, dirlist_len);
-  argz_stringify (abs_filename, dirlist_len, ':');
-  cp = abs_filename + (dirlist_len - 1);
-  *cp++ = '/';
-  cp = stpcpy (cp, language);
-
-  if ((mask & TERRITORY) != 0)
-    {
-      *cp++ = '_';
-      cp = stpcpy (cp, territory);
-    }
-  if ((mask & XPG_CODESET) != 0)
-    {
-      *cp++ = '.';
-      cp = stpcpy (cp, codeset);
-    }
-  if ((mask & XPG_NORM_CODESET) != 0)
-    {
-      *cp++ = '.';
-      cp = stpcpy (cp, normalized_codeset);
-    }
-  if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0)
-    {
-      /* This component can be part of both syntaces but has different
-	 leading characters.  For CEN we use `+', else `@'.  */
-      *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@';
-      cp = stpcpy (cp, modifier);
-    }
-  if ((mask & CEN_SPECIAL) != 0)
-    {
-      *cp++ = '+';
-      cp = stpcpy (cp, special);
-    }
-  if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0)
-    {
-      *cp++ = ',';
-      if ((mask & CEN_SPONSOR) != 0)
-	cp = stpcpy (cp, sponsor);
-      if ((mask & CEN_REVISION) != 0)
-	{
-	  *cp++ = '_';
-	  cp = stpcpy (cp, revision);
-	}
-    }
-
-  *cp++ = '/';
-  stpcpy (cp, filename);
-
-  /* Look in list of already loaded domains whether it is already
-     available.  */
-  last = NULL;
-  for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
-    if (retval->filename != NULL)
-      {
-	int compare = strcmp (retval->filename, abs_filename);
-	if (compare == 0)
-	  /* We found it!  */
-	  break;
-	if (compare < 0)
-	  {
-	    /* It's not in the list.  */
-	    retval = NULL;
-	    break;
-	  }
-
-	last = retval;
-      }
-
-  if (retval != NULL || do_allocate == 0)
-    {
-      free (abs_filename);
-      return retval;
-    }
-
-  retval = (struct loaded_l10nfile *)
-    malloc (sizeof (*retval) + (argz_count (dirlist, dirlist_len)
-				* (1 << pop (mask))
-				* sizeof (struct loaded_l10nfile *)));
-  if (retval == NULL)
-    return NULL;
-
-  retval->filename = abs_filename;
-  retval->decided = (argz_count (dirlist, dirlist_len) != 1
-		     || ((mask & XPG_CODESET) != 0
-			 && (mask & XPG_NORM_CODESET) != 0));
-  retval->data = NULL;
-
-  if (last == NULL)
-    {
-      retval->next = *l10nfile_list;
-      *l10nfile_list = retval;
-    }
-  else
-    {
-      retval->next = last->next;
-      last->next = retval;
-    }
-
-  entries = 0;
-  /* If the DIRLIST is a real list the RETVAL entry corresponds not to
-     a real file.  So we have to use the DIRLIST separation mechanism
-     of the inner loop.  */
-  cnt = argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask;
-  for (; cnt >= 0; --cnt)
-    if ((cnt & ~mask) == 0
-	&& ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
-	&& ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
-      {
-	/* Iterate over all elements of the DIRLIST.  */
-	char *dir = NULL;
-
-	while ((dir = argz_next ((char *) dirlist, dirlist_len, dir))
-	       != NULL)
-	  retval->successor[entries++]
-	    = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt,
-				  language, territory, codeset,
-				  normalized_codeset, modifier, special,
-				  sponsor, revision, filename, 1);
-      }
-  retval->successor[entries] = NULL;
-
-  return retval;
-}
-
-/* Normalize codeset name.  There is no standard for the codeset
-   names.  Normalization allows the user to use any of the common
-   names.  The return value is dynamically allocated and has to be
-   freed by the caller.  */
-const char *
-_nl_normalize_codeset (codeset, name_len)
-     const char *codeset;
-     size_t name_len;
-{
-  int len = 0;
-  int only_digit = 1;
-  char *retval;
-  char *wp;
-  size_t cnt;
-
-  for (cnt = 0; cnt < name_len; ++cnt)
-    if (isalnum (codeset[cnt]))
-      {
-	++len;
-
-	if (isalpha (codeset[cnt]))
-	  only_digit = 0;
-      }
-
-  retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1);
-
-  if (retval != NULL)
-    {
-      if (only_digit)
-	wp = stpcpy (retval, "iso");
-      else
-	wp = retval;
-
-      for (cnt = 0; cnt < name_len; ++cnt)
-	if (isalpha (codeset[cnt]))
-	  *wp++ = tolower (codeset[cnt]);
-	else if (isdigit (codeset[cnt]))
-	  *wp++ = codeset[cnt];
-
-      *wp = '\0';
-    }
-
-  return (const char *) retval;
-}
-
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_GLIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif
-
-#endif /* MB_CAPABLE */
diff --git a/newlib/libc/sys/linux/intl/loadinfo.h b/newlib/libc/sys/linux/intl/loadinfo.h
deleted file mode 100644
index 1de6cfd24..000000000
--- a/newlib/libc/sys/linux/intl/loadinfo.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LOADINFO_H
-#define _LOADINFO_H	1
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-/* Tell the compiler when a conditional or integer expression is
-   almost always true or almost always false.  */
-#ifndef HAVE_BUILTIN_EXPECT
-# define __builtin_expect(expr, val) (expr)
-#endif
-
-/* Encoding of locale name parts.  */
-#define CEN_REVISION		1
-#define CEN_SPONSOR		2
-#define CEN_SPECIAL		4
-#define XPG_NORM_CODESET	8
-#define XPG_CODESET		16
-#define TERRITORY		32
-#define CEN_AUDIENCE		64
-#define XPG_MODIFIER		128
-
-#define CEN_SPECIFIC	(CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE)
-#define XPG_SPECIFIC	(XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER)
-
-
-struct loaded_l10nfile
-{
-  const char *filename;
-  int decided;
-
-  const void *data;
-
-  struct loaded_l10nfile *next;
-  struct loaded_l10nfile *successor[1];
-};
-
-
-/* Normalize codeset name.  There is no standard for the codeset
-   names.  Normalization allows the user to use any of the common
-   names.  The return value is dynamically allocated and has to be
-   freed by the caller.  */
-extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
-						  size_t name_len));
-
-extern struct loaded_l10nfile *
-_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
-			    const char *dirlist, size_t dirlist_len, int mask,
-			    const char *language, const char *territory,
-			    const char *codeset,
-			    const char *normalized_codeset,
-			    const char *modifier, const char *special,
-			    const char *sponsor, const char *revision,
-			    const char *filename, int do_allocate));
-
-
-extern const char *_nl_expand_alias PARAMS ((const char *name));
-
-/* normalized_codeset is dynamically allocated and has to be freed by
-   the caller.  */
-extern int _nl_explode_name PARAMS ((char *name, const char **language,
-				     const char **modifier,
-				     const char **territory,
-				     const char **codeset,
-				     const char **normalized_codeset,
-				     const char **special,
-				     const char **sponsor,
-				     const char **revision));
-
-extern char *_nl_find_language PARAMS ((const char *name));
-
-#endif	/* loadinfo.h */
diff --git a/newlib/libc/sys/linux/intl/loadmsgcat.c b/newlib/libc/sys/linux/intl/loadmsgcat.c
deleted file mode 100644
index 94f3e9a4c..000000000
--- a/newlib/libc/sys/linux/intl/loadmsgcat.c
+++ /dev/null
@@ -1,562 +0,0 @@
-#ifdef MB_CAPABLE 
-
-/* Load needed message catalogs.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-   This must come before <config.h> because <config.h> may include
-   <features.h>, and once <features.h> has been included, it's too late.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE    1
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#ifdef _LIBC
-# include <langinfo.h>
-# include <locale.h>
-#endif
-
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-    || (defined _LIBC && defined _POSIX_MAPPED_FILES)
-# include <sys/mman.h>
-# undef HAVE_MMAP
-# define HAVE_MMAP	1
-#else
-# undef HAVE_MMAP
-#endif
-
-#include "gettext.h"
-#include "gettextP.h"
-
-#ifdef _GLIBC
-# include "localeinfo.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ISO C functions.  This is required by the standard
-   because some ISO C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define open   __open
-# define close  __close
-# define read   __read
-# define mmap   __mmap
-# define munmap __munmap
-#endif
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define PLURAL_PARSE __gettextparse
-#else
-# define PLURAL_PARSE gettextparse__
-#endif
-
-/* For those losing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-# define freea(p) /* nothing */
-#else
-# define alloca(n) malloc (n)
-# define freea(p) free (p)
-#endif
-
-/* We need a sign, whether a new catalog was loaded, which can be associated
-   with all translations.  This is important if the translations are
-   cached by one of GCC's features.  */
-int _nl_msg_cat_cntr;
-
-#if defined __GNUC__ \
-    || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L)
-
-/* These structs are the constant expression for the germanic plural
-   form determination.  It represents the expression  "n != 1".  */
-static const struct expression plvar =
-{
-  .nargs = 0,
-  .operation = var,
-};
-static const struct expression plone =
-{
-  .nargs = 0,
-  .operation = num,
-  .val =
-  {
-    .num = 1
-  }
-};
-static struct expression germanic_plural =
-{
-  .nargs = 2,
-  .operation = not_equal,
-  .val =
-  {
-    .args =
-    {
-      [0] = (struct expression *) &plvar,
-      [1] = (struct expression *) &plone
-    }
-  }
-};
-
-# define INIT_GERMANIC_PLURAL()
-
-#else
-
-/* For compilers without support for ISO C 99 struct/union initializers:
-   Initialization at run-time.  */
-
-static struct expression plvar;
-static struct expression plone;
-static struct expression germanic_plural;
-
-static void
-init_germanic_plural ()
-{
-  if (plone.val.num == 0)
-    {
-      plvar.nargs = 0;
-      plvar.operation = var;
-
-      plone.nargs = 0;
-      plone.operation = num;
-      plone.val.num = 1;
-
-      germanic_plural.nargs = 2;
-      germanic_plural.operation = not_equal;
-      germanic_plural.val.args[0] = &plvar;
-      germanic_plural.val.args[1] = &plone;
-    }
-}
-
-# define INIT_GERMANIC_PLURAL() init_germanic_plural ()
-
-#endif
-
-
-/* Initialize the codeset dependent parts of an opened message catalog.
-   Return the header entry.  */
-const char *
-internal_function
-_nl_init_domain_conv (domain_file, domain, domainbinding)
-     struct loaded_l10nfile *domain_file;
-     struct loaded_domain *domain;
-     struct binding *domainbinding;
-{
-  /* Find out about the character set the file is encoded with.
-     This can be found (in textual form) in the entry "".  If this
-     entry does not exist or if this does not contain the `charset='
-     information, we will assume the charset matches the one the
-     current locale and we don't have to perform any conversion.  */
-  char *nullentry;
-  size_t nullentrylen;
-
-  /* Preinitialize fields, to avoid recursion during _nl_find_msg.  */
-  domain->codeset_cntr =
-    (domainbinding != NULL ? domainbinding->codeset_cntr : 0);
-#ifdef _GLIBC
-  domain->conv = (__gconv_t) -1;
-#else
-# if HAVE_ICONV
-  domain->conv = (iconv_t) -1;
-# endif
-#endif
-  domain->conv_tab = NULL;
-
-  /* Get the header entry.  */
-  nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen);
-
-  if (nullentry != NULL)
-    {
-#if defined _LIBC || HAVE_ICONV
-      const char *charsetstr;
-
-      charsetstr = strstr (nullentry, "charset=");
-      if (charsetstr != NULL)
-	{
-	  size_t len;
-	  char *charset;
-	  const char *outcharset;
-
-	  charsetstr += strlen ("charset=");
-	  len = strcspn (charsetstr, " \t\n");
-
-	  charset = (char *) alloca (len + 1);
-# if defined _LIBC || HAVE_MEMPCPY
-	  *((char *) mempcpy (charset, charsetstr, len)) = '\0';
-# else
-	  memcpy (charset, charsetstr, len);
-	  charset[len] = '\0';
-# endif
-
-	  /* The output charset should normally be determined by the
-	     locale.  But sometimes the locale is not used or not correctly
-	     set up, so we provide a possibility for the user to override
-	     this.  Moreover, the value specified through
-	     bind_textdomain_codeset overrides both.  */
-	  if (domainbinding != NULL && domainbinding->codeset != NULL)
-	    outcharset = domainbinding->codeset;
-	  else
-	    {
-	      outcharset = getenv ("OUTPUT_CHARSET");
-	      if (outcharset == NULL || outcharset[0] == '\0')
-		{
-# ifdef _GLIBC
-		  outcharset = (*_nl_current[LC_CTYPE])->values[_NL_ITEM_INDEX (CODESET)].string;
-# else
-#  if HAVE_ICONV
-		  extern const char *__locale_charset (void);
-		  outcharset = __locale_charset ();
-#  endif
-# endif
-		}
-	    }
-
-# ifdef _GLIBC
-	  /* We always want to use transliteration.  */
-	  outcharset = norm_add_slashes (outcharset, "TRANSLIT");
-	  charset = norm_add_slashes (charset, NULL);
-	  if (__gconv_open (outcharset, charset, &domain->conv,
-			    GCONV_AVOID_NOCONV)
-	      != __GCONV_OK)
-	    domain->conv = (__gconv_t) -1;
-# else
-#  if HAVE_ICONV
-	  /* When using GNU libiconv, we want to use transliteration.  */
-#   if _LIBICONV_VERSION
-	  len = strlen (outcharset);
-	  {
-	    char *tmp = (char *) alloca (len + 10 + 1);
-	    memcpy (tmp, outcharset, len);
-	    memcpy (tmp + len, "//TRANSLIT", 10 + 1);
-	    outcharset = tmp;
-	  }
-#   endif
-	  domain->conv = iconv_open (outcharset, charset);
-#   if _LIBICONV_VERSION
-	  freea (outcharset);
-#   endif
-#  endif
-# endif
-
-	  freea (charset);
-	}
-#endif /* _LIBC || HAVE_ICONV */
-    }
-
-  return nullentry;
-}
-
-/* Frees the codeset dependent parts of an opened message catalog.  */
-void
-internal_function
-_nl_free_domain_conv (domain)
-     struct loaded_domain *domain;
-{
-  if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1)
-    free (domain->conv_tab);
-
-#ifdef _GLIBC
-  if (domain->conv != (__gconv_t) -1)
-    __gconv_close (domain->conv);
-#else
-# if HAVE_ICONV
-  if (domain->conv != (iconv_t) -1)
-    iconv_close (domain->conv);
-# endif
-#endif
-}
-
-/* Load the message catalogs specified by FILENAME.  If it is no valid
-   message catalog do nothing.  */
-void
-internal_function
-_nl_load_domain (domain_file, domainbinding)
-     struct loaded_l10nfile *domain_file;
-     struct binding *domainbinding;
-{
-  int fd;
-  size_t size;
-#ifdef _LIBC
-  struct stat64 st;
-#else
-  struct stat st;
-#endif
-  struct mo_file_header *data = (struct mo_file_header *) -1;
-  int use_mmap = 0;
-  struct loaded_domain *domain;
-  const char *nullentry;
-
-  domain_file->decided = 1;
-  domain_file->data = NULL;
-
-  /* Note that it would be useless to store domainbinding in domain_file
-     because domainbinding might be == NULL now but != NULL later (after
-     a call to bind_textdomain_codeset).  */
-
-  /* If the record does not represent a valid locale the FILENAME
-     might be NULL.  This can happen when according to the given
-     specification the locale file name is different for XPG and CEN
-     syntax.  */
-  if (domain_file->filename == NULL)
-    return;
-
-  /* Try to open the addressed file.  */
-  fd = open (domain_file->filename, O_RDONLY);
-  if (fd == -1)
-    return;
-
-  /* We must know about the size of the file.  */
-  if (
-#ifdef _LIBC
-      __builtin_expect (fstat64 (fd, &st) != 0, 0)
-#else
-      __builtin_expect (fstat (fd, &st) != 0, 0)
-#endif
-      || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0)
-      || __builtin_expect (size < sizeof (struct mo_file_header), 0))
-    {
-      /* Something went wrong.  */
-      close (fd);
-      return;
-    }
-
-#ifdef HAVE_MMAP
-  /* Now we are ready to load the file.  If mmap() is available we try
-     this first.  If not available or it failed we try to load it.  */
-  data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
-					 MAP_PRIVATE, fd, 0);
-
-  if (__builtin_expect (data != (struct mo_file_header *) -1, 1))
-    {
-      /* mmap() call was successful.  */
-      close (fd);
-      use_mmap = 1;
-    }
-#endif
-
-  /* If the data is not yet available (i.e. mmap'ed) we try to load
-     it manually.  */
-  if (data == (struct mo_file_header *) -1)
-    {
-      size_t to_read;
-      char *read_ptr;
-
-      data = (struct mo_file_header *) malloc (size);
-      if (data == NULL)
-	return;
-
-      to_read = size;
-      read_ptr = (char *) data;
-      do
-	{
-	  long int nb = (long int) read (fd, read_ptr, to_read);
-	  if (nb <= 0)
-	    {
-#ifdef EINTR
-	      if (nb == -1 && errno == EINTR)
-		continue;
-#endif
-	      close (fd);
-	      return;
-	    }
-	  read_ptr += nb;
-	  to_read -= nb;
-	}
-      while (to_read > 0);
-
-      close (fd);
-    }
-
-  /* Using the magic number we can test whether it really is a message
-     catalog file.  */
-  if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED,
-			0))
-    {
-      /* The magic number is wrong: not a message catalog file.  */
-#ifdef HAVE_MMAP
-      if (use_mmap)
-	munmap ((caddr_t) data, size);
-      else
-#endif
-	free (data);
-      return;
-    }
-
-  domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
-  if (domain == NULL)
-    return;
-  domain_file->data = domain;
-
-  domain->data = (char *) data;
-  domain->use_mmap = use_mmap;
-  domain->mmap_size = size;
-  domain->must_swap = data->magic != _MAGIC;
-
-  /* Fill in the information about the available tables.  */
-  switch (W (domain->must_swap, data->revision))
-    {
-    case 0:
-      domain->nstrings = W (domain->must_swap, data->nstrings);
-      domain->orig_tab = (struct string_desc *)
-	((char *) data + W (domain->must_swap, data->orig_tab_offset));
-      domain->trans_tab = (struct string_desc *)
-	((char *) data + W (domain->must_swap, data->trans_tab_offset));
-      domain->hash_size = W (domain->must_swap, data->hash_tab_size);
-      domain->hash_tab = (nls_uint32 *)
-	((char *) data + W (domain->must_swap, data->hash_tab_offset));
-      break;
-    default:
-      /* This is an invalid revision.  */
-#ifdef HAVE_MMAP
-      if (use_mmap)
-	munmap ((caddr_t) data, size);
-      else
-#endif
-	free (data);
-      free (domain);
-      domain_file->data = NULL;
-      return;
-    }
-
-  /* Now initialize the character set converter from the character set
-     the file is encoded with (found in the header entry) to the domain's
-     specified character set or the locale's character set.  */
-  nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding);
-
-  /* Also look for a plural specification.  */
-  if (nullentry != NULL)
-    {
-      const char *plural;
-      const char *nplurals;
-
-      plural = strstr (nullentry, "plural=");
-      nplurals = strstr (nullentry, "nplurals=");
-      if (plural == NULL || nplurals == NULL)
-	goto no_plural;
-      else
-	{
-	  /* First get the number.  */
-	  char *endp;
-	  unsigned long int n;
-	  struct parse_args args;
-
-	  nplurals += 9;
-	  while (*nplurals != '\0' && isspace (*nplurals))
-	    ++nplurals;
-#if defined HAVE_STRTOUL || defined _LIBC
-	  n = strtoul (nplurals, &endp, 10);
-#else
-	  for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++)
-	    n = n * 10 + (*endp - '0');
-#endif
-	  domain->nplurals = n;
-	  if (nplurals == endp)
-	    goto no_plural;
-
-	  /* Due to the restrictions bison imposes onto the interface of the
-	     scanner function we have to put the input string and the result
-	     passed up from the parser into the same structure which address
-	     is passed down to the parser.  */
-	  plural += 7;
-	  args.cp = plural;
-	  if (PLURAL_PARSE (&args) != 0)
-	    goto no_plural;
-	  domain->plural = args.res;
-	}
-    }
-  else
-    {
-      /* By default we are using the Germanic form: singular form only
-         for `one', the plural form otherwise.  Yes, this is also what
-         English is using since English is a Germanic language.  */
-    no_plural:
-      INIT_GERMANIC_PLURAL ();
-      domain->plural = &germanic_plural;
-      domain->nplurals = 2;
-    }
-}
-
-
-#ifdef _LIBC
-void
-internal_function
-_nl_unload_domain (domain)
-     struct loaded_domain *domain;
-{
-  if (domain->plural != &germanic_plural)
-    __gettext_free_exp (domain->plural);
-
-  _nl_free_domain_conv (domain);
-
-# ifdef _POSIX_MAPPED_FILES
-  if (domain->use_mmap)
-    munmap ((caddr_t) domain->data, domain->mmap_size);
-  else
-# endif	/* _POSIX_MAPPED_FILES */
-    free ((void *) domain->data);
-
-  free (domain);
-}
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/intl/locale.alias b/newlib/libc/sys/linux/intl/locale.alias
deleted file mode 100644
index 08c250d35..000000000
--- a/newlib/libc/sys/linux/intl/locale.alias
+++ /dev/null
@@ -1,75 +0,0 @@
-# Locale name alias data base.
-# Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# The format of this file is the same as for the corresponding file of
-# the X Window System, which normally can be found in
-#	/usr/lib/X11/locale/locale.alias
-# A single line contains two fields: an alias and a substitution value.
-# All entries are case independent.
-
-# Note: This file is far from being complete.  If you have a value for
-# your own site which you think might be useful for others too, share
-# it with the rest of us.  Send it using the `glibcbug' script to
-# bugs@gnu.org.
-
-bokmal		no_NO.ISO-8859-1
-bokmål		no_NO.ISO-8859-1
-catalan		ca_ES.ISO-8859-1
-croatian	hr_HR.ISO-8859-2
-czech		cs_CZ.ISO-8859-2
-danish          da_DK.ISO-8859-1
-dansk		da_DK.ISO-8859-1
-deutsch		de_DE.ISO-8859-1
-dutch		nl_NL.ISO-8859-1
-eesti		et_EE.ISO-8859-1
-estonian	et_EE.ISO-8859-1
-finnish         fi_FI.ISO-8859-1
-français	fr_FR.ISO-8859-1
-french		fr_FR.ISO-8859-1
-galego		gl_ES.ISO-8859-1
-galician	gl_ES.ISO-8859-1
-german		de_DE.ISO-8859-1
-greek           el_GR.ISO-8859-7
-hebrew          he_IL.ISO-8859-8
-hrvatski	hr_HR.ISO-8859-2
-hungarian       hu_HU.ISO-8859-2
-icelandic       is_IS.ISO-8859-1
-italian         it_IT.ISO-8859-1
-japanese	ja_JP.eucJP
-japanese.euc	ja_JP.eucJP
-ja_JP		ja_JP.eucJP
-ja_JP.ujis	ja_JP.eucJP
-japanese.sjis	ja_JP.SJIS
-korean		ko_KR.eucKR
-korean.euc 	ko_KR.eucKR
-ko_KR		ko_KR.eucKR
-lithuanian      lt_LT.ISO-8859-13
-nb_NO		no_NO.ISO-8859-1
-nb_NO.ISO-8859-1 no_NO.ISO-8859-1
-norwegian       no_NO.ISO-8859-1
-nynorsk		nn_NO.ISO-8859-1
-polish          pl_PL.ISO-8859-2
-portuguese      pt_PT.ISO-8859-1
-romanian        ro_RO.ISO-8859-2
-russian         ru_RU.ISO-8859-5
-slovak          sk_SK.ISO-8859-2
-slovene         sl_SI.ISO-8859-2
-slovenian       sl_SI.ISO-8859-2
-spanish         es_ES.ISO-8859-1
-swedish         sv_SE.ISO-8859-1
-thai		th_TH.TIS-620
-turkish         tr_TR.ISO-8859-9
diff --git a/newlib/libc/sys/linux/intl/localealias.c b/newlib/libc/sys/linux/intl/localealias.c
deleted file mode 100644
index 03b6304cc..000000000
--- a/newlib/libc/sys/linux/intl/localealias.c
+++ /dev/null
@@ -1,443 +0,0 @@
-#ifdef MB_CAPABLE
-
-/* Handle aliases for locale names.
-   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-   This must come before <config.h> because <config.h> may include
-   <features.h>, and once <features.h> has been included, it's too late.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE    1
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <ctype.h>
-#include <stdio.h>
-#if defined _GLIBC || defined HAVE___FSETLOCKING
-# include <stdio_ext.h>
-#endif
-#include <sys/types.h>
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) (bcopy (Src, Dst, Num), (Dst))
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#include "gettextP.h"
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-
-#ifdef _GLIBC
-# define strcasecmp __strcasecmp
-# ifndef mempcpy
-#  define mempcpy __mempcpy
-# endif
-# define HAVE_MEMPCPY	1
-# define HAVE___FSETLOCKING	1
-#endif
-
-/* We need locking here since we can be called from different places.  */
-# include <bits/libc-lock.h>
-
-__libc_lock_define_initialized (static, lock);
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-/* Some optimizations for glibc.  */
-#ifdef _GLIBC
-# define FEOF(fp)		feof_unlocked (fp)
-# define FGETS(buf, n, fp)	fgets_unlocked (buf, n, fp)
-#else
-# define FEOF(fp)		feof (fp)
-# define FGETS(buf, n, fp)	fgets (buf, n, fp)
-#endif
-
-/* For those losing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-# define freea(p) /* nothing */
-#else
-# define alloca(n) malloc (n)
-# define freea(p) free (p)
-#endif
-
-#if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED
-# undef fgets
-# define fgets(buf, len, s) fgets_unlocked (buf, len, s)
-#endif
-#if defined _LIBC_REENTRANT || defined HAVE_FEOF_UNLOCKED
-# undef feof
-# define feof(s) feof_unlocked (s)
-#endif
-
-
-struct alias_map
-{
-  const char *alias;
-  const char *value;
-};
-
-
-static char *string_space;
-static size_t string_space_act;
-static size_t string_space_max;
-static struct alias_map *map;
-static size_t nmap;
-static size_t maxmap;
-
-
-/* Prototypes for local functions.  */
-static size_t read_alias_file PARAMS ((const char *fname, int fname_len))
-     internal_function;
-static int extend_alias_table PARAMS ((void));
-static int alias_compare PARAMS ((const struct alias_map *map1,
-				  const struct alias_map *map2));
-
-
-const char *
-_nl_expand_alias (name)
-    const char *name;
-{
-  static const char *locale_alias_path = LOCALE_ALIAS_PATH;
-  struct alias_map *retval;
-  const char *result = NULL;
-  size_t added;
-
-#ifdef _LIBC
-  __libc_lock_lock (lock);
-#endif
-
-  do
-    {
-      struct alias_map item;
-
-      item.alias = name;
-
-      if (nmap > 0)
-	retval = (struct alias_map *) bsearch (&item, map, nmap,
-					       sizeof (struct alias_map),
-					       (int (*) PARAMS ((const void *,
-								 const void *))
-						) alias_compare);
-      else
-	retval = NULL;
-
-      /* We really found an alias.  Return the value.  */
-      if (retval != NULL)
-	{
-	  result = retval->value;
-	  break;
-	}
-
-      /* Perhaps we can find another alias file.  */
-      added = 0;
-      while (added == 0 && locale_alias_path[0] != '\0')
-	{
-	  const char *start;
-
-	  while (locale_alias_path[0] == ':')
-	    ++locale_alias_path;
-	  start = locale_alias_path;
-
-	  while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
-	    ++locale_alias_path;
-
-	  if (start < locale_alias_path)
-	    added = read_alias_file (start, locale_alias_path - start);
-	}
-    }
-  while (added != 0);
-
-#ifdef _LIBC
-  __libc_lock_unlock (lock);
-#endif
-
-  return result;
-}
-
-
-static size_t
-internal_function
-read_alias_file (fname, fname_len)
-     const char *fname;
-     int fname_len;
-{
-  FILE *fp;
-  char *full_fname;
-  size_t added;
-  static const char aliasfile[] = "/locale.alias";
-
-  full_fname = (char *) alloca (fname_len + sizeof aliasfile);
-#ifdef HAVE_MEMPCPY
-  mempcpy (mempcpy (full_fname, fname, fname_len),
-	   aliasfile, sizeof aliasfile);
-#else
-  memcpy (full_fname, fname, fname_len);
-  memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
-#endif
-
-  fp = fopen (full_fname, "r");
-  freea (full_fname);
-  if (fp == NULL)
-    return 0;
-
-#ifdef HAVE___FSETLOCKING
-  /* No threads present.  */
-  __fsetlocking (fp, FSETLOCKING_BYCALLER);
-#endif
-
-  added = 0;
-  while (!FEOF (fp))
-    {
-      /* It is a reasonable approach to use a fix buffer here because
-	 a) we are only interested in the first two fields
-	 b) these fields must be usable as file names and so must not
-	    be that long
-       */
-      char buf[BUFSIZ];
-      char *alias;
-      char *value;
-      char *cp;
-
-      if (FGETS (buf, sizeof buf, fp) == NULL)
-	/* EOF reached.  */
-	break;
-
-      /* Possibly not the whole line fits into the buffer.  Ignore
-	 the rest of the line.  */
-      if (strchr (buf, '\n') == NULL)
-	{
-	  char altbuf[BUFSIZ];
-	  do
-	    if (FGETS (altbuf, sizeof altbuf, fp) == NULL)
-	      /* Make sure the inner loop will be left.  The outer loop
-		 will exit at the `feof' test.  */
-	      break;
-	  while (strchr (altbuf, '\n') == NULL);
-	}
-
-      cp = buf;
-      /* Ignore leading white space.  */
-      while (isspace (cp[0]))
-	++cp;
-
-      /* A leading '#' signals a comment line.  */
-      if (cp[0] != '\0' && cp[0] != '#')
-	{
-	  alias = cp++;
-	  while (cp[0] != '\0' && !isspace (cp[0]))
-	    ++cp;
-	  /* Terminate alias name.  */
-	  if (cp[0] != '\0')
-	    *cp++ = '\0';
-
-	  /* Now look for the beginning of the value.  */
-	  while (isspace (cp[0]))
-	    ++cp;
-
-	  if (cp[0] != '\0')
-	    {
-	      size_t alias_len;
-	      size_t value_len;
-
-	      value = cp++;
-	      while (cp[0] != '\0' && !isspace (cp[0]))
-		++cp;
-	      /* Terminate value.  */
-	      if (cp[0] == '\n')
-		{
-		  /* This has to be done to make the following test
-		     for the end of line possible.  We are looking for
-		     the terminating '\n' which do not overwrite here.  */
-		  *cp++ = '\0';
-		  *cp = '\n';
-		}
-	      else if (cp[0] != '\0')
-		*cp++ = '\0';
-
-	      if (nmap >= maxmap)
-		if (__builtin_expect (extend_alias_table (), 0))
-		  return added;
-
-	      alias_len = strlen (alias) + 1;
-	      value_len = strlen (value) + 1;
-
-	      if (string_space_act + alias_len + value_len > string_space_max)
-		{
-		  /* Increase size of memory pool.  */
-		  size_t new_size = (string_space_max
-				     + (alias_len + value_len > 1024
-					? alias_len + value_len : 1024));
-		  char *new_pool = (char *) realloc (string_space, new_size);
-		  if (new_pool == NULL)
-		    return added;
-
-		  if (__builtin_expect (string_space != new_pool, 0))
-		    {
-		      size_t i;
-
-		      for (i = 0; i < nmap; i++)
-			{
-			  map[i].alias += new_pool - string_space;
-			  map[i].value += new_pool - string_space;
-			}
-		    }
-
-		  string_space = new_pool;
-		  string_space_max = new_size;
-		}
-
-	      map[nmap].alias = memcpy (&string_space[string_space_act],
-					alias, alias_len);
-	      string_space_act += alias_len;
-
-	      map[nmap].value = memcpy (&string_space[string_space_act],
-					value, value_len);
-	      string_space_act += value_len;
-
-	      ++nmap;
-	      ++added;
-	    }
-	}
-    }
-
-  /* Should we test for ferror()?  I think we have to silently ignore
-     errors.  --drepper  */
-  fclose (fp);
-
-  if (added > 0)
-    qsort (map, nmap, sizeof (struct alias_map),
-	   (int (*) PARAMS ((const void *, const void *))) alias_compare);
-
-  return added;
-}
-
-
-static int
-extend_alias_table ()
-{
-  size_t new_size;
-  struct alias_map *new_map;
-
-  new_size = maxmap == 0 ? 100 : 2 * maxmap;
-  new_map = (struct alias_map *) realloc (map, (new_size
-						* sizeof (struct alias_map)));
-  if (new_map == NULL)
-    /* Simply don't extend: we don't have any more core.  */
-    return -1;
-
-  map = new_map;
-  maxmap = new_size;
-  return 0;
-}
-
-
-#ifdef _LIBC
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  if (string_space != NULL)
-    free (string_space);
-  if (map != NULL)
-    free (map);
-}
-text_set_element (__libc_subfreeres, free_mem);
-#endif
-
-
-static int
-alias_compare (map1, map2)
-     const struct alias_map *map1;
-     const struct alias_map *map2;
-{
-#if defined _LIBC || defined HAVE_STRCASECMP
-  return strcasecmp (map1->alias, map2->alias);
-#else
-  const unsigned char *p1 = (const unsigned char *) map1->alias;
-  const unsigned char *p2 = (const unsigned char *) map2->alias;
-  unsigned char c1, c2;
-
-  if (p1 == p2)
-    return 0;
-
-  do
-    {
-      /* I know this seems to be odd but the tolower() function in
-	 some systems libc cannot handle nonalpha characters.  */
-      c1 = isupper (*p1) ? tolower (*p1) : *p1;
-      c2 = isupper (*p2) ? tolower (*p2) : *p2;
-      if (c1 == '\0')
-	break;
-      ++p1;
-      ++p2;
-    }
-  while (c1 == c2);
-
-  return c1 - c2;
-#endif
-}
-
-#endif /* MB_CAPABLE */
diff --git a/newlib/libc/sys/linux/intl/ngettext.c b/newlib/libc/sys/linux/intl/ngettext.c
deleted file mode 100644
index 70d43838b..000000000
--- a/newlib/libc/sys/linux/intl/ngettext.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Implementation of ngettext(3) function.
-   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#ifdef _LIBC
-# define __need_NULL
-# include <stddef.h>
-#else
-# ifdef STDC_HEADERS
-#  include <stdlib.h>		/* Just for NULL.  */
-# else
-#  ifdef HAVE_STRING_H
-#   include <string.h>
-#  else
-#   define NULL ((void *) 0)
-#  endif
-# endif
-#endif
-
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-
-#include <locale.h>
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define NGETTEXT __ngettext
-# define DCNGETTEXT __dcngettext
-#else
-# define NGETTEXT ngettext__
-# define DCNGETTEXT dcngettext__
-#endif
-
-/* Look up MSGID in the current default message catalog for the current
-   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
-   text).  */
-char *
-NGETTEXT (msgid1, msgid2, n)
-     const char *msgid1;
-     const char *msgid2;
-     unsigned long int n;
-{
-  return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__ngettext, ngettext);
-#endif
diff --git a/newlib/libc/sys/linux/intl/open_catalog.c b/newlib/libc/sys/linux/intl/open_catalog.c
deleted file mode 100644
index a0c4a807c..000000000
--- a/newlib/libc/sys/linux/intl/open_catalog.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* Copyright (C) 1996-2000, 2001, 2002 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper, <drepper@gnu.org>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <byteswap.h>
-#include <endian.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#ifdef _POSIX_MAPPED_FILES
-# include <sys/mman.h>
-#endif
-#include <sys/stat.h>
-
-#include "catgetsinfo.h"
-
-
-#define SWAPU32(w) bswap_32 (w)
-
-
-int
-__open_catalog (const char *cat_name, const char *nlspath, const char *env_var,
-		__nl_catd catalog)
-{
-  int fd = -1;
-  struct stat64 st;
-  int swapping;
-  size_t cnt;
-  size_t max_offset;
-  size_t tab_size;
-  const char *lastp;
-  int result = -1;
-
-  if (strchr (cat_name, '/') != NULL || nlspath == NULL)
-    fd = __open (cat_name, O_RDONLY);
-  else
-    {
-      const char *run_nlspath = nlspath;
-#define ENOUGH(n)							      \
-  if (__builtin_expect (bufact + (n) >= bufmax, 0))			      \
-    {									      \
-      char *old_buf = buf;						      \
-      bufmax += 256 + (n);						      \
-      buf = (char *) alloca (bufmax);					      \
-      memcpy (buf, old_buf, bufact);					      \
-    }
-
-      /* The RUN_NLSPATH variable contains a colon separated list of
-	 descriptions where we expect to find catalogs.  We have to
-	 recognize certain % substitutions and stop when we found the
-	 first existing file.  */
-      char *buf;
-      size_t bufact;
-      size_t bufmax;
-      size_t len;
-
-      buf = NULL;
-      bufmax = 0;
-
-      fd = -1;
-      while (*run_nlspath != '\0')
-	{
-	  bufact = 0;
-
-	  if (*run_nlspath == ':')
-	    {
-	      /* Leading colon or adjacent colons - treat same as %N.  */
-	      len = strlen (cat_name);
-	      ENOUGH (len);
-	      memcpy (&buf[bufact], cat_name, len);
-	      bufact += len;
-	    }
-	  else
-	    while (*run_nlspath != ':' && *run_nlspath != '\0')
-	      if (*run_nlspath == '%')
-		{
-		  const char *tmp;
-
-		  ++run_nlspath;	/* We have seen the `%'.  */
-		  switch (*run_nlspath++)
-		    {
-		    case 'N':
-		      /* Use the catalog name.  */
-		      len = strlen (cat_name);
-		      ENOUGH (len);
-		      memcpy (&buf[bufact], cat_name, len);
-		      bufact += len;
-		      break;
-		    case 'L':
-		      /* Use the current locale category value.  */
-		      len = strlen (env_var);
-		      ENOUGH (len);
-		      memcpy (&buf[bufact], env_var, len);
-		      bufact += len;
-		      break;
-		    case 'l':
-		      /* Use language element of locale category value.  */
-		      tmp = env_var;
-		      do
-			{
-			  ENOUGH (1);
-			  buf[bufact++] = *tmp++;
-			}
-		      while (*tmp != '\0' && *tmp != '_' && *tmp != '.');
-		      break;
-		    case 't':
-		      /* Use territory element of locale category value.  */
-		      tmp = env_var;
-		      do
-			++tmp;
-		      while (*tmp != '\0' && *tmp != '_' && *tmp != '.');
-		      if (*tmp == '_')
-			{
-			  ++tmp;
-			  do
-			    {
-			      ENOUGH (1);
-			      buf[bufact++] = *tmp++;
-			    }
-			  while (*tmp != '\0' && *tmp != '.');
-			}
-		      break;
-		    case 'c':
-		      /* Use code set element of locale category value.  */
-		      tmp = env_var;
-		      do
-			++tmp;
-		      while (*tmp != '\0' && *tmp != '.');
-		      if (*tmp == '.')
-			{
-			  ++tmp;
-			  do
-			    {
-			      ENOUGH (1);
-			      buf[bufact++] = *tmp++;
-			    }
-			  while (*tmp != '\0');
-			}
-		      break;
-		    case '%':
-		      ENOUGH (1);
-		      buf[bufact++] = '%';
-		      break;
-		    default:
-		      /* Unknown variable: ignore this path element.  */
-		      bufact = 0;
-		      while (*run_nlspath != '\0' && *run_nlspath != ':')
-			++run_nlspath;
-		      break;
-		    }
-		}
-	      else
-		{
-		  ENOUGH (1);
-		  buf[bufact++] = *run_nlspath++;
-		}
-
-	  ENOUGH (1);
-	  buf[bufact] = '\0';
-
-	  if (bufact != 0)
-	    {
-	      fd = __open (buf, O_RDONLY);
-	      if (fd >= 0)
-		break;
-	    }
-
-	  ++run_nlspath;
-	}
-    }
-
-  /* Avoid dealing with directories and block devices */
-  if (__builtin_expect (fd, 0) < 0)
-    return -1;
-
-  if (__builtin_expect (fstat64 (fd, &st), 0) < 0)
-    goto close_unlock_return;
-
-  if (__builtin_expect (!S_ISREG (st.st_mode), 0)
-      || st.st_size < sizeof (struct catalog_obj))
-    {
-      /* `errno' is not set correctly but the file is not usable.
-	 Use an reasonable error value.  */
-      __set_errno (EINVAL);
-      goto close_unlock_return;
-    }
-
-  catalog->file_size = st.st_size;
-#ifdef _POSIX_MAPPED_FILES
-# ifndef MAP_COPY
-    /* Linux seems to lack read-only copy-on-write.  */
-#  define MAP_COPY MAP_PRIVATE
-# endif
-# ifndef MAP_FILE
-    /* Some systems do not have this flag; it is superfluous.  */
-#  define MAP_FILE 0
-# endif
-# ifndef MAP_INHERIT
-    /* Some systems might lack this; they lose.  */
-#  define MAP_INHERIT 0
-# endif
-  catalog->file_ptr =
-    (struct catalog_obj *) __mmap (NULL, st.st_size, PROT_READ,
-				   MAP_FILE|MAP_COPY|MAP_INHERIT, fd, 0);
-  if (__builtin_expect (catalog->file_ptr != (struct catalog_obj *) MAP_FAILED,
-			1))
-    /* Tell the world we managed to mmap the file.  */
-    catalog->status = mmapped;
-  else
-#endif /* _POSIX_MAPPED_FILES */
-    {
-      /* mmap failed perhaps because the system call is not
-	 implemented.  Try to load the file.  */
-      size_t todo;
-      catalog->file_ptr = malloc (st.st_size);
-      if (catalog->file_ptr == NULL)
-	goto close_unlock_return;
-
-      todo = st.st_size;
-      /* Save read, handle partial reads.  */
-      do
-	{
-	  size_t now = __read (fd, (((char *) catalog->file_ptr)
-				    + (st.st_size - todo)), todo);
-	  if (now == 0 || now == (size_t) -1)
-	    {
-#ifdef EINTR
-	      if (now == (size_t) -1 && errno == EINTR)
-		continue;
-#endif
-	      free ((void *) catalog->file_ptr);
-	      goto close_unlock_return;
-	    }
-	  todo -= now;
-	}
-      while (todo > 0);
-      catalog->status = malloced;
-    }
-
-  /* Determine whether the file is a catalog file and if yes whether
-     it is written using the correct byte order.  Else we have to swap
-     the values.  */
-  if (__builtin_expect (catalog->file_ptr->magic, CATGETS_MAGIC)
-      == CATGETS_MAGIC)
-    swapping = 0;
-  else if (catalog->file_ptr->magic == SWAPU32 (CATGETS_MAGIC))
-    swapping = 1;
-  else
-    {
-    invalid_file:
-      /* Invalid file.  Free the resources and mark catalog as not
-	 usable.  */
-#ifdef _POSIX_MAPPED_FILES
-      if (catalog->status == mmapped)
-	__munmap ((void *) catalog->file_ptr, catalog->file_size);
-      else
-#endif	/* _POSIX_MAPPED_FILES */
-	free (catalog->file_ptr);
-      goto close_unlock_return;
-    }
-
-#define SWAP(x) (swapping ? SWAPU32 (x) : (x))
-
-  /* Get dimensions of the used hashing table.  */
-  catalog->plane_size = SWAP (catalog->file_ptr->plane_size);
-  catalog->plane_depth = SWAP (catalog->file_ptr->plane_depth);
-
-  /* The file contains two versions of the pointer tables.  Pick the
-     right one for the local byte order.  */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-  catalog->name_ptr = &catalog->file_ptr->name_ptr[0];
-#elif __BYTE_ORDER == __BIG_ENDIAN
-  catalog->name_ptr = &catalog->file_ptr->name_ptr[catalog->plane_size
-						  * catalog->plane_depth
-						  * 3];
-#else
-# error Cannot handle __BYTE_ORDER byte order
-#endif
-
-  /* The rest of the file contains all the strings.  They are
-     addressed relative to the position of the first string.  */
-  catalog->strings =
-    (const char *) &catalog->file_ptr->name_ptr[catalog->plane_size
-					       * catalog->plane_depth * 3 * 2];
-
-  /* Determine the largest string offset mentioned in the table.  */
-  max_offset = 0;
-  tab_size = 3 * catalog->plane_size * catalog->plane_depth;
-  for (cnt = 2; cnt < tab_size; cnt += 3)
-    if (catalog->name_ptr[cnt] > max_offset)
-      max_offset = catalog->name_ptr[cnt];
-
-  /* Now we can check whether the file is large enough to contain the
-     tables it says it contains.  */
-  if (st.st_size <= (sizeof (struct catalog_obj) + 2 * tab_size + max_offset))
-    /* The last string is not contained in the file.  */
-    goto invalid_file;
-
-  lastp = catalog->strings + max_offset;
-  max_offset = (st.st_size
-		- sizeof (struct catalog_obj) + 2 * tab_size + max_offset);
-  while (*lastp != '\0')
-    {
-      if (--max_offset == 0)
-	goto invalid_file;
-      ++lastp;
-    }
-
-  /* We succeeded.  */
-  result = 0;
-
-  /* Release the lock again.  */
- close_unlock_return:
-  __close (fd);
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/intl/plural.c b/newlib/libc/sys/linux/intl/plural.c
deleted file mode 100644
index 7585c2743..000000000
--- a/newlib/libc/sys/linux/intl/plural.c
+++ /dev/null
@@ -1,1319 +0,0 @@
-
-/*  A Bison parser, made from plural.y
-    by GNU Bison version 1.28  */
-
-#define YYBISON 1  /* Identify Bison output.  */
-
-#define yyparse __gettextparse
-#define yylex __gettextlex
-#define yyerror __gettexterror
-#define yylval __gettextlval
-#define yychar __gettextchar
-#define yydebug __gettextdebug
-#define yynerrs __gettextnerrs
-#define	EQUOP2	257
-#define	CMPOP2	258
-#define	ADDOP2	259
-#define	MULOP2	260
-#define	NUMBER	261
-
-#line 1 "plural.y"
-
-/* Expression parsing for plural form selection.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdlib.h>
-#include "gettextP.h"
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define FREE_EXPRESSION __gettext_free_exp
-#else
-# define FREE_EXPRESSION gettext_free_exp__
-# define __gettextparse gettextparse__
-#endif
-
-#define YYLEX_PARAM	&((struct parse_args *) arg)->cp
-#define YYPARSE_PARAM	arg
-
-#line 46 "plural.y"
-typedef union {
-  unsigned long int num;
-  enum operator op;
-  struct expression *exp;
-} YYSTYPE;
-#line 52 "plural.y"
-
-/* Prototypes for local functions.  */
-static struct expression *new_exp PARAMS ((int nargs, enum operator op,
-					   struct expression * const *args));
-static inline struct expression *new_exp_0 PARAMS ((enum operator op));
-static inline struct expression *new_exp_1 PARAMS ((enum operator op,
-						   struct expression *right));
-static struct expression *new_exp_2 PARAMS ((enum operator op,
-					     struct expression *left,
-					     struct expression *right));
-static inline struct expression *new_exp_3 PARAMS ((enum operator op,
-						   struct expression *bexp,
-						   struct expression *tbranch,
-						   struct expression *fbranch));
-static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
-static void yyerror PARAMS ((const char *str));
-
-/* Allocation of expressions.  */
-
-static struct expression *
-new_exp (nargs, op, args)
-     int nargs;
-     enum operator op;
-     struct expression * const *args;
-{
-  int i;
-  struct expression *newp;
-
-  /* If any of the argument could not be malloc'ed, just return NULL.  */
-  for (i = nargs - 1; i >= 0; i--)
-    if (args[i] == NULL)
-      goto fail;
-
-  /* Allocate a new expression.  */
-  newp = (struct expression *) malloc (sizeof (*newp));
-  if (newp != NULL)
-    {
-      newp->nargs = nargs;
-      newp->operation = op;
-      for (i = nargs - 1; i >= 0; i--)
-	newp->val.args[i] = args[i];
-      return newp;
-    }
-
- fail:
-  for (i = nargs - 1; i >= 0; i--)
-    FREE_EXPRESSION (args[i]);
-
-  return NULL;
-}
-
-static inline struct expression *
-new_exp_0 (op)
-     enum operator op;
-{
-  return new_exp (0, op, NULL);
-}
-
-static inline struct expression *
-new_exp_1 (op, right)
-     enum operator op;
-     struct expression *right;
-{
-  struct expression *args[1];
-
-  args[0] = right;
-  return new_exp (1, op, args);
-}
-
-static struct expression *
-new_exp_2 (op, left, right)
-     enum operator op;
-     struct expression *left;
-     struct expression *right;
-{
-  struct expression *args[2];
-
-  args[0] = left;
-  args[1] = right;
-  return new_exp (2, op, args);
-}
-
-static inline struct expression *
-new_exp_3 (op, bexp, tbranch, fbranch)
-     enum operator op;
-     struct expression *bexp;
-     struct expression *tbranch;
-     struct expression *fbranch;
-{
-  struct expression *args[3];
-
-  args[0] = bexp;
-  args[1] = tbranch;
-  args[2] = fbranch;
-  return new_exp (3, op, args);
-}
-
-#include <stdio.h>
-
-#ifndef __cplusplus
-#ifndef __STDC__
-#define const
-#endif
-#endif
-
-
-
-#define	YYFINAL		27
-#define	YYFLAG		-32768
-#define	YYNTBASE	16
-
-#define YYTRANSLATE(x) ((unsigned)(x) <= 261 ? yytranslate[x] : 18)
-
-static const char yytranslate[] = {     0,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,    10,     2,     2,     2,     2,     5,     2,    14,
-    15,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,    12,     2,     2,
-     2,     2,     3,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,    13,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     4,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     1,     6,     7,     8,     9,
-    11
-};
-
-#if YYDEBUG != 0
-static const short yyprhs[] = {     0,
-     0,     2,     8,    12,    16,    20,    24,    28,    32,    35,
-    37,    39
-};
-
-static const short yyrhs[] = {    17,
-     0,    17,     3,    17,    12,    17,     0,    17,     4,    17,
-     0,    17,     5,    17,     0,    17,     6,    17,     0,    17,
-     7,    17,     0,    17,     8,    17,     0,    17,     9,    17,
-     0,    10,    17,     0,    13,     0,    11,     0,    14,    17,
-    15,     0
-};
-
-#endif
-
-#if YYDEBUG != 0
-static const short yyrline[] = { 0,
-   171,   179,   183,   187,   191,   195,   199,   203,   207,   211,
-   215,   220
-};
-#endif
-
-
-#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
-
-static const char * const yytname[] = {   "$","error","$undefined.","'?'","'|'",
-"'&'","EQUOP2","CMPOP2","ADDOP2","MULOP2","'!'","NUMBER","':'","'n'","'('","')'",
-"start","exp", NULL
-};
-#endif
-
-static const short yyr1[] = {     0,
-    16,    17,    17,    17,    17,    17,    17,    17,    17,    17,
-    17,    17
-};
-
-static const short yyr2[] = {     0,
-     1,     5,     3,     3,     3,     3,     3,     3,     2,     1,
-     1,     3
-};
-
-static const short yydefact[] = {     0,
-     0,    11,    10,     0,     1,     9,     0,     0,     0,     0,
-     0,     0,     0,     0,    12,     0,     3,     4,     5,     6,
-     7,     8,     0,     2,     0,     0,     0
-};
-
-static const short yydefgoto[] = {    25,
-     5
-};
-
-static const short yypact[] = {    -9,
-    -9,-32768,-32768,    -9,    34,-32768,    11,    -9,    -9,    -9,
-    -9,    -9,    -9,    -9,-32768,    24,    39,    43,    16,    26,
-    -3,-32768,    -9,    34,    21,    53,-32768
-};
-
-static const short yypgoto[] = {-32768,
-    -1
-};
-
-
-#define	YYLAST		53
-
-
-static const short yytable[] = {     6,
-     1,     2,     7,     3,     4,    14,    16,    17,    18,    19,
-    20,    21,    22,     8,     9,    10,    11,    12,    13,    14,
-    26,    24,    12,    13,    14,    15,     8,     9,    10,    11,
-    12,    13,    14,    13,    14,    23,     8,     9,    10,    11,
-    12,    13,    14,    10,    11,    12,    13,    14,    11,    12,
-    13,    14,    27
-};
-
-static const short yycheck[] = {     1,
-    10,    11,     4,    13,    14,     9,     8,     9,    10,    11,
-    12,    13,    14,     3,     4,     5,     6,     7,     8,     9,
-     0,    23,     7,     8,     9,    15,     3,     4,     5,     6,
-     7,     8,     9,     8,     9,    12,     3,     4,     5,     6,
-     7,     8,     9,     5,     6,     7,     8,     9,     6,     7,
-     8,     9,     0
-};
-#define YYPURE 1
-
-/* -*-C-*-  Note some compilers choke on comments on `#line' lines.  */
-#line 3 "/usr/lib/bison.simple"
-/* This file comes from bison-1.28.  */
-
-/* Skeleton output parser for bison,
-   Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, when this file is copied by Bison into a
-   Bison output file, you may use that output file without restriction.
-   This special exception was added by the Free Software Foundation
-   in version 1.24 of Bison.  */
-
-/* This is the parser code that is written into each bison parser
-  when the %semantic_parser declaration is not specified in the grammar.
-  It was written by Richard Stallman by simplifying the hairy parser
-  used when %semantic_parser is specified.  */
-
-#ifndef YYSTACK_USE_ALLOCA
-#ifdef alloca
-#define YYSTACK_USE_ALLOCA
-#else /* alloca not defined */
-#ifdef __GNUC__
-#define YYSTACK_USE_ALLOCA
-#define alloca __builtin_alloca
-#else /* not GNU C.  */
-#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
-#define YYSTACK_USE_ALLOCA
-#include <alloca.h>
-#else /* not sparc */
-/* We think this test detects Watcom and Microsoft C.  */
-/* This used to test MSDOS, but that is a bad idea
-   since that symbol is in the user namespace.  */
-#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
-#if 0 /* No need for malloc.h, which pollutes the namespace;
-	 instead, just don't use alloca.  */
-#include <malloc.h>
-#endif
-#else /* not MSDOS, or __TURBOC__ */
-#if defined(_AIX)
-/* I don't know what this was needed for, but it pollutes the namespace.
-   So I turned it off.   rms, 2 May 1997.  */
-/* #include <malloc.h>  */
- #pragma alloca
-#define YYSTACK_USE_ALLOCA
-#else /* not MSDOS, or __TURBOC__, or _AIX */
-#if 0
-#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
-		 and on HPUX 10.  Eventually we can turn this on.  */
-#define YYSTACK_USE_ALLOCA
-#define alloca __builtin_alloca
-#endif /* __hpux */
-#endif
-#endif /* not _AIX */
-#endif /* not MSDOS, or __TURBOC__ */
-#endif /* not sparc */
-#endif /* not GNU C */
-#endif /* alloca not defined */
-#endif /* YYSTACK_USE_ALLOCA not defined */
-
-#ifdef YYSTACK_USE_ALLOCA
-#define YYSTACK_ALLOC alloca
-#else
-#define YYSTACK_ALLOC malloc
-#endif
-
-/* Note: there must be only one dollar sign in this file.
-   It is replaced by the list of actions, each action
-   as one case of the switch.  */
-
-#define yyerrok		(yyerrstatus = 0)
-#define yyclearin	(yychar = YYEMPTY)
-#define YYEMPTY		-2
-#define YYEOF		0
-#define YYACCEPT	goto yyacceptlab
-#define YYABORT 	goto yyabortlab
-#define YYERROR		goto yyerrlab1
-/* Like YYERROR except do call yyerror.
-   This remains here temporarily to ease the
-   transition to the new meaning of YYERROR, for GCC.
-   Once GCC version 2 has supplanted version 1, this can go.  */
-#define YYFAIL		goto yyerrlab
-#define YYRECOVERING()  (!!yyerrstatus)
-#define YYBACKUP(token, value) \
-do								\
-  if (yychar == YYEMPTY && yylen == 1)				\
-    { yychar = (token), yylval = (value);			\
-      yychar1 = YYTRANSLATE (yychar);				\
-      YYPOPSTACK;						\
-      goto yybackup;						\
-    }								\
-  else								\
-    { yyerror ("syntax error: cannot back up"); YYERROR; }	\
-while (0)
-
-#define YYTERROR	1
-#define YYERRCODE	256
-
-#ifndef YYPURE
-#define YYLEX		yylex()
-#endif
-
-#ifdef YYPURE
-#ifdef YYLSP_NEEDED
-#ifdef YYLEX_PARAM
-#define YYLEX		yylex(&yylval, &yylloc, YYLEX_PARAM)
-#else
-#define YYLEX		yylex(&yylval, &yylloc)
-#endif
-#else /* not YYLSP_NEEDED */
-#ifdef YYLEX_PARAM
-#define YYLEX		yylex(&yylval, YYLEX_PARAM)
-#else
-#define YYLEX		yylex(&yylval)
-#endif
-#endif /* not YYLSP_NEEDED */
-#endif
-
-/* If nonreentrant, generate the variables here */
-
-#ifndef YYPURE
-
-int	yychar;			/*  the lookahead symbol		*/
-YYSTYPE	yylval;			/*  the semantic value of the		*/
-				/*  lookahead symbol			*/
-
-#ifdef YYLSP_NEEDED
-YYLTYPE yylloc;			/*  location data for the lookahead	*/
-				/*  symbol				*/
-#endif
-
-int yynerrs;			/*  number of parse errors so far       */
-#endif  /* not YYPURE */
-
-#if YYDEBUG != 0
-int yydebug;			/*  nonzero means print parse trace	*/
-/* Since this is uninitialized, it does not stop multiple parsers
-   from coexisting.  */
-#endif
-
-/*  YYINITDEPTH indicates the initial size of the parser's stacks	*/
-
-#ifndef	YYINITDEPTH
-#define YYINITDEPTH 200
-#endif
-
-/*  YYMAXDEPTH is the maximum size the stacks can grow to
-    (effective only if the built-in stack extension method is used).  */
-
-#if YYMAXDEPTH == 0
-#undef YYMAXDEPTH
-#endif
-
-#ifndef YYMAXDEPTH
-#define YYMAXDEPTH 10000
-#endif
-
-/* Define __yy_memcpy.  Note that the size argument
-   should be passed with type unsigned int, because that is what the non-GCC
-   definitions require.  With GCC, __builtin_memcpy takes an arg
-   of type size_t, but it can handle unsigned int.  */
-
-#if __GNUC__ > 1		/* GNU C and GNU C++ define this.  */
-#define __yy_memcpy(TO,FROM,COUNT)	__builtin_memcpy(TO,FROM,COUNT)
-#else				/* not GNU C or C++ */
-#ifndef __cplusplus
-
-/* This is the most reliable way to avoid incompatibilities
-   in available built-in functions on various systems.  */
-static void
-__yy_memcpy (to, from, count)
-     char *to;
-     char *from;
-     unsigned int count;
-{
-  register char *f = from;
-  register char *t = to;
-  register int i = count;
-
-  while (i-- > 0)
-    *t++ = *f++;
-}
-
-#else /* __cplusplus */
-
-/* This is the most reliable way to avoid incompatibilities
-   in available built-in functions on various systems.  */
-static void
-__yy_memcpy (char *to, char *from, unsigned int count)
-{
-  register char *t = to;
-  register char *f = from;
-  register int i = count;
-
-  while (i-- > 0)
-    *t++ = *f++;
-}
-
-#endif
-#endif
-
-#line 217 "/usr/lib/bison.simple"
-
-/* The user can define YYPARSE_PARAM as the name of an argument to be passed
-   into yyparse.  The argument should have type void *.
-   It should actually point to an object.
-   Grammar actions can access the variable by casting it
-   to the proper pointer type.  */
-
-#ifdef YYPARSE_PARAM
-#ifdef __cplusplus
-#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
-#define YYPARSE_PARAM_DECL
-#else /* not __cplusplus */
-#define YYPARSE_PARAM_ARG YYPARSE_PARAM
-#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
-#endif /* not __cplusplus */
-#else /* not YYPARSE_PARAM */
-#define YYPARSE_PARAM_ARG
-#define YYPARSE_PARAM_DECL
-#endif /* not YYPARSE_PARAM */
-
-/* Prevent warning if -Wstrict-prototypes.  */
-#ifdef __GNUC__
-#ifdef YYPARSE_PARAM
-int yyparse (void *);
-#else
-int yyparse (void);
-#endif
-#endif
-
-int
-yyparse(YYPARSE_PARAM_ARG)
-     YYPARSE_PARAM_DECL
-{
-  register int yystate;
-  register int yyn;
-  register short *yyssp;
-  register YYSTYPE *yyvsp;
-  int yyerrstatus;	/*  number of tokens to shift before error messages enabled */
-  int yychar1 = 0;		/*  lookahead token as an internal (translated) token number */
-
-  short	yyssa[YYINITDEPTH];	/*  the state stack			*/
-  YYSTYPE yyvsa[YYINITDEPTH];	/*  the semantic value stack		*/
-
-  short *yyss = yyssa;		/*  refer to the stacks thru separate pointers */
-  YYSTYPE *yyvs = yyvsa;	/*  to allow yyoverflow to reallocate them elsewhere */
-
-#ifdef YYLSP_NEEDED
-  YYLTYPE yylsa[YYINITDEPTH];	/*  the location stack			*/
-  YYLTYPE *yyls = yylsa;
-  YYLTYPE *yylsp;
-
-#define YYPOPSTACK   (yyvsp--, yyssp--, yylsp--)
-#else
-#define YYPOPSTACK   (yyvsp--, yyssp--)
-#endif
-
-  int yystacksize = YYINITDEPTH;
-  int yyfree_stacks = 0;
-
-#ifdef YYPURE
-  int yychar;
-  YYSTYPE yylval;
-  int yynerrs;
-#ifdef YYLSP_NEEDED
-  YYLTYPE yylloc;
-#endif
-#endif
-
-  YYSTYPE yyval;		/*  the variable used to return		*/
-				/*  semantic values from the action	*/
-				/*  routines				*/
-
-  int yylen;
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Starting parse\n");
-#endif
-
-  yystate = 0;
-  yyerrstatus = 0;
-  yynerrs = 0;
-  yychar = YYEMPTY;		/* Cause a token to be read.  */
-
-  /* Initialize stack pointers.
-     Waste one element of value and location stack
-     so that they stay on the same level as the state stack.
-     The wasted elements are never initialized.  */
-
-  yyssp = yyss - 1;
-  yyvsp = yyvs;
-#ifdef YYLSP_NEEDED
-  yylsp = yyls;
-#endif
-
-/* Push a new state, which is found in  yystate  .  */
-/* In all cases, when you get here, the value and location stacks
-   have just been pushed. so pushing a state here evens the stacks.  */
-yynewstate:
-
-  *++yyssp = yystate;
-
-  if (yyssp >= yyss + yystacksize - 1)
-    {
-      /* Give user a chance to reallocate the stack */
-      /* Use copies of these so that the &'s don't force the real ones into memory. */
-      YYSTYPE *yyvs1 = yyvs;
-      short *yyss1 = yyss;
-#ifdef YYLSP_NEEDED
-      YYLTYPE *yyls1 = yyls;
-#endif
-
-      /* Get the current used size of the three stacks, in elements.  */
-      int size = yyssp - yyss + 1;
-
-#ifdef yyoverflow
-      /* Each stack pointer address is followed by the size of
-	 the data in use in that stack, in bytes.  */
-#ifdef YYLSP_NEEDED
-      /* This used to be a conditional around just the two extra args,
-	 but that might be undefined if yyoverflow is a macro.  */
-      yyoverflow("parser stack overflow",
-		 &yyss1, size * sizeof (*yyssp),
-		 &yyvs1, size * sizeof (*yyvsp),
-		 &yyls1, size * sizeof (*yylsp),
-		 &yystacksize);
-#else
-      yyoverflow("parser stack overflow",
-		 &yyss1, size * sizeof (*yyssp),
-		 &yyvs1, size * sizeof (*yyvsp),
-		 &yystacksize);
-#endif
-
-      yyss = yyss1; yyvs = yyvs1;
-#ifdef YYLSP_NEEDED
-      yyls = yyls1;
-#endif
-#else /* no yyoverflow */
-      /* Extend the stack our own way.  */
-      if (yystacksize >= YYMAXDEPTH)
-	{
-	  yyerror("parser stack overflow");
-	  if (yyfree_stacks)
-	    {
-	      free (yyss);
-	      free (yyvs);
-#ifdef YYLSP_NEEDED
-	      free (yyls);
-#endif
-	    }
-	  return 2;
-	}
-      yystacksize *= 2;
-      if (yystacksize > YYMAXDEPTH)
-	yystacksize = YYMAXDEPTH;
-#ifndef YYSTACK_USE_ALLOCA
-      yyfree_stacks = 1;
-#endif
-      yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
-      __yy_memcpy ((char *)yyss, (char *)yyss1,
-		   size * (unsigned int) sizeof (*yyssp));
-      yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
-      __yy_memcpy ((char *)yyvs, (char *)yyvs1,
-		   size * (unsigned int) sizeof (*yyvsp));
-#ifdef YYLSP_NEEDED
-      yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
-      __yy_memcpy ((char *)yyls, (char *)yyls1,
-		   size * (unsigned int) sizeof (*yylsp));
-#endif
-#endif /* no yyoverflow */
-
-      yyssp = yyss + size - 1;
-      yyvsp = yyvs + size - 1;
-#ifdef YYLSP_NEEDED
-      yylsp = yyls + size - 1;
-#endif
-
-#if YYDEBUG != 0
-      if (yydebug)
-	fprintf(stderr, "Stack size increased to %d\n", yystacksize);
-#endif
-
-      if (yyssp >= yyss + yystacksize - 1)
-	YYABORT;
-    }
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Entering state %d\n", yystate);
-#endif
-
-  goto yybackup;
- yybackup:
-
-/* Do appropriate processing given the current state.  */
-/* Read a lookahead token if we need one and don't already have one.  */
-/* yyresume: */
-
-  /* First try to decide what to do without reference to lookahead token.  */
-
-  yyn = yypact[yystate];
-  if (yyn == YYFLAG)
-    goto yydefault;
-
-  /* Not known => get a lookahead token if don't already have one.  */
-
-  /* yychar is either YYEMPTY or YYEOF
-     or a valid token in external form.  */
-
-  if (yychar == YYEMPTY)
-    {
-#if YYDEBUG != 0
-      if (yydebug)
-	fprintf(stderr, "Reading a token: ");
-#endif
-      yychar = YYLEX;
-    }
-
-  /* Convert token to internal form (in yychar1) for indexing tables with */
-
-  if (yychar <= 0)		/* This means end of input. */
-    {
-      yychar1 = 0;
-      yychar = YYEOF;		/* Don't call YYLEX any more */
-
-#if YYDEBUG != 0
-      if (yydebug)
-	fprintf(stderr, "Now at end of input.\n");
-#endif
-    }
-  else
-    {
-      yychar1 = YYTRANSLATE(yychar);
-
-#if YYDEBUG != 0
-      if (yydebug)
-	{
-	  fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
-	  /* Give the individual parser a way to print the precise meaning
-	     of a token, for further debugging info.  */
-#ifdef YYPRINT
-	  YYPRINT (stderr, yychar, yylval);
-#endif
-	  fprintf (stderr, ")\n");
-	}
-#endif
-    }
-
-  yyn += yychar1;
-  if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-    goto yydefault;
-
-  yyn = yytable[yyn];
-
-  /* yyn is what to do for this token type in this state.
-     Negative => reduce, -yyn is rule number.
-     Positive => shift, yyn is new state.
-       New state is final state => don't bother to shift,
-       just return success.
-     0, or most negative number => error.  */
-
-  if (yyn < 0)
-    {
-      if (yyn == YYFLAG)
-	goto yyerrlab;
-      yyn = -yyn;
-      goto yyreduce;
-    }
-  else if (yyn == 0)
-    goto yyerrlab;
-
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
-  /* Shift the lookahead token.  */
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
-#endif
-
-  /* Discard the token being shifted unless it is eof.  */
-  if (yychar != YYEOF)
-    yychar = YYEMPTY;
-
-  *++yyvsp = yylval;
-#ifdef YYLSP_NEEDED
-  *++yylsp = yylloc;
-#endif
-
-  /* count tokens shifted since error; after three, turn off error status.  */
-  if (yyerrstatus) yyerrstatus--;
-
-  yystate = yyn;
-  goto yynewstate;
-
-/* Do the default action for the current state.  */
-yydefault:
-
-  yyn = yydefact[yystate];
-  if (yyn == 0)
-    goto yyerrlab;
-
-/* Do a reduction.  yyn is the number of a rule to reduce with.  */
-yyreduce:
-  yylen = yyr2[yyn];
-  if (yylen > 0)
-    yyval = yyvsp[1-yylen]; /* implement default value of the action */
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      int i;
-
-      fprintf (stderr, "Reducing via rule %d (line %d), ",
-	       yyn, yyrline[yyn]);
-
-      /* Print the symbols being reduced, and their result.  */
-      for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
-	fprintf (stderr, "%s ", yytname[yyrhs[i]]);
-      fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-    }
-#endif
-
-
-  switch (yyn) {
-
-case 1:
-#line 172 "plural.y"
-{
-	    if (yyvsp[0].exp == NULL)
-	      YYABORT;
-	    ((struct parse_args *) arg)->res = yyvsp[0].exp;
-	  ;
-    break;}
-case 2:
-#line 180 "plural.y"
-{
-	    yyval.exp = new_exp_3 (qmop, yyvsp[-4].exp, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 3:
-#line 184 "plural.y"
-{
-	    yyval.exp = new_exp_2 (lor, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 4:
-#line 188 "plural.y"
-{
-	    yyval.exp = new_exp_2 (land, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 5:
-#line 192 "plural.y"
-{
-	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 6:
-#line 196 "plural.y"
-{
-	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 7:
-#line 200 "plural.y"
-{
-	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 8:
-#line 204 "plural.y"
-{
-	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-	  ;
-    break;}
-case 9:
-#line 208 "plural.y"
-{
-	    yyval.exp = new_exp_1 (lnot, yyvsp[0].exp);
-	  ;
-    break;}
-case 10:
-#line 212 "plural.y"
-{
-	    yyval.exp = new_exp_0 (var);
-	  ;
-    break;}
-case 11:
-#line 216 "plural.y"
-{
-	    if ((yyval.exp = new_exp_0 (num)) != NULL)
-	      yyval.exp->val.num = yyvsp[0].num;
-	  ;
-    break;}
-case 12:
-#line 221 "plural.y"
-{
-	    yyval.exp = yyvsp[-1].exp;
-	  ;
-    break;}
-}
-   /* the action file gets copied in in place of this dollarsign */
-#line 543 "/usr/lib/bison.simple"
-
-  yyvsp -= yylen;
-  yyssp -= yylen;
-#ifdef YYLSP_NEEDED
-  yylsp -= yylen;
-#endif
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      short *ssp1 = yyss - 1;
-      fprintf (stderr, "state stack now");
-      while (ssp1 != yyssp)
-	fprintf (stderr, " %d", *++ssp1);
-      fprintf (stderr, "\n");
-    }
-#endif
-
-  *++yyvsp = yyval;
-
-#ifdef YYLSP_NEEDED
-  yylsp++;
-  if (yylen == 0)
-    {
-      yylsp->first_line = yylloc.first_line;
-      yylsp->first_column = yylloc.first_column;
-      yylsp->last_line = (yylsp-1)->last_line;
-      yylsp->last_column = (yylsp-1)->last_column;
-      yylsp->text = 0;
-    }
-  else
-    {
-      yylsp->last_line = (yylsp+yylen-1)->last_line;
-      yylsp->last_column = (yylsp+yylen-1)->last_column;
-    }
-#endif
-
-  /* Now "shift" the result of the reduction.
-     Determine what state that goes to,
-     based on the state we popped back to
-     and the rule number reduced by.  */
-
-  yyn = yyr1[yyn];
-
-  yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-  if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-    yystate = yytable[yystate];
-  else
-    yystate = yydefgoto[yyn - YYNTBASE];
-
-  goto yynewstate;
-
-yyerrlab:   /* here on detecting error */
-
-  if (! yyerrstatus)
-    /* If not already recovering from an error, report this error.  */
-    {
-      ++yynerrs;
-
-#ifdef YYERROR_VERBOSE
-      yyn = yypact[yystate];
-
-      if (yyn > YYFLAG && yyn < YYLAST)
-	{
-	  int size = 0;
-	  char *msg;
-	  int x, count;
-
-	  count = 0;
-	  /* Start X at -yyn if nec to avoid negative indexes in yycheck.  */
-	  for (x = (yyn < 0 ? -yyn : 0);
-	       x < (sizeof(yytname) / sizeof(char *)); x++)
-	    if (yycheck[x + yyn] == x)
-	      size += strlen(yytname[x]) + 15, count++;
-	  msg = (char *) malloc(size + 15);
-	  if (msg != 0)
-	    {
-	      strcpy(msg, "parse error");
-
-	      if (count < 5)
-		{
-		  count = 0;
-		  for (x = (yyn < 0 ? -yyn : 0);
-		       x < (sizeof(yytname) / sizeof(char *)); x++)
-		    if (yycheck[x + yyn] == x)
-		      {
-			strcat(msg, count == 0 ? ", expecting `" : " or `");
-			strcat(msg, yytname[x]);
-			strcat(msg, "'");
-			count++;
-		      }
-		}
-	      yyerror(msg);
-	      free(msg);
-	    }
-	  else
-	    yyerror ("parse error; also virtual memory exceeded");
-	}
-      else
-#endif /* YYERROR_VERBOSE */
-	yyerror("parse error");
-    }
-
-  goto yyerrlab1;
-yyerrlab1:   /* here on error raised explicitly by an action */
-
-  if (yyerrstatus == 3)
-    {
-      /* if just tried and failed to reuse lookahead token after an error, discard it.  */
-
-      /* return failure if at end of input */
-      if (yychar == YYEOF)
-	YYABORT;
-
-#if YYDEBUG != 0
-      if (yydebug)
-	fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
-#endif
-
-      yychar = YYEMPTY;
-    }
-
-  /* Else will try to reuse lookahead token
-     after shifting the error token.  */
-
-  yyerrstatus = 3;		/* Each real token shifted decrements this */
-
-  goto yyerrhandle;
-
-yyerrdefault:  /* current state does not do anything special for the error token. */
-
-#if 0
-  /* This is wrong; only states that explicitly want error tokens
-     should shift them.  */
-  yyn = yydefact[yystate];  /* If its default is to accept any token, ok.  Otherwise pop it.*/
-  if (yyn) goto yydefault;
-#endif
-
-yyerrpop:   /* pop the current state because it cannot handle the error token */
-
-  if (yyssp == yyss) YYABORT;
-  yyvsp--;
-  yystate = *--yyssp;
-#ifdef YYLSP_NEEDED
-  yylsp--;
-#endif
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      short *ssp1 = yyss - 1;
-      fprintf (stderr, "Error: state stack now");
-      while (ssp1 != yyssp)
-	fprintf (stderr, " %d", *++ssp1);
-      fprintf (stderr, "\n");
-    }
-#endif
-
-yyerrhandle:
-
-  yyn = yypact[yystate];
-  if (yyn == YYFLAG)
-    goto yyerrdefault;
-
-  yyn += YYTERROR;
-  if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-    goto yyerrdefault;
-
-  yyn = yytable[yyn];
-  if (yyn < 0)
-    {
-      if (yyn == YYFLAG)
-	goto yyerrpop;
-      yyn = -yyn;
-      goto yyreduce;
-    }
-  else if (yyn == 0)
-    goto yyerrpop;
-
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Shifting error token, ");
-#endif
-
-  *++yyvsp = yylval;
-#ifdef YYLSP_NEEDED
-  *++yylsp = yylloc;
-#endif
-
-  yystate = yyn;
-  goto yynewstate;
-
- yyacceptlab:
-  /* YYACCEPT comes here.  */
-  if (yyfree_stacks)
-    {
-      free (yyss);
-      free (yyvs);
-#ifdef YYLSP_NEEDED
-      free (yyls);
-#endif
-    }
-  return 0;
-
- yyabortlab:
-  /* YYABORT comes here.  */
-  if (yyfree_stacks)
-    {
-      free (yyss);
-      free (yyvs);
-#ifdef YYLSP_NEEDED
-      free (yyls);
-#endif
-    }
-  return 1;
-}
-#line 226 "plural.y"
-
-
-void
-internal_function
-FREE_EXPRESSION (exp)
-     struct expression *exp;
-{
-  if (exp == NULL)
-    return;
-
-  /* Handle the recursive case.  */
-  switch (exp->nargs)
-    {
-    case 3:
-      FREE_EXPRESSION (exp->val.args[2]);
-      /* FALLTHROUGH */
-    case 2:
-      FREE_EXPRESSION (exp->val.args[1]);
-      /* FALLTHROUGH */
-    case 1:
-      FREE_EXPRESSION (exp->val.args[0]);
-      /* FALLTHROUGH */
-    default:
-      break;
-    }
-
-  free (exp);
-}
-
-
-static int
-yylex (lval, pexp)
-     YYSTYPE *lval;
-     const char **pexp;
-{
-  const char *exp = *pexp;
-  int result;
-
-  while (1)
-    {
-      if (exp[0] == '\0')
-	{
-	  *pexp = exp;
-	  return YYEOF;
-	}
-
-      if (exp[0] != ' ' && exp[0] != '\t')
-	break;
-
-      ++exp;
-    }
-
-  result = *exp++;
-  switch (result)
-    {
-    case '0': case '1': case '2': case '3': case '4':
-    case '5': case '6': case '7': case '8': case '9':
-      {
-	unsigned long int n = result - '0';
-	while (exp[0] >= '0' && exp[0] <= '9')
-	  {
-	    n *= 10;
-	    n += exp[0] - '0';
-	    ++exp;
-	  }
-	lval->num = n;
-	result = NUMBER;
-      }
-      break;
-
-    case '=':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = equal;
-	  result = EQUOP2;
-	}
-      else
-	result = YYERRCODE;
-      break;
-
-    case '!':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = not_equal;
-	  result = EQUOP2;
-	}
-      break;
-
-    case '&':
-    case '|':
-      if (exp[0] == result)
-	++exp;
-      else
-	result = YYERRCODE;
-      break;
-
-    case '<':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = less_or_equal;
-	}
-      else
-	lval->op = less_than;
-      result = CMPOP2;
-      break;
-
-    case '>':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = greater_or_equal;
-	}
-      else
-	lval->op = greater_than;
-      result = CMPOP2;
-      break;
-
-    case '*':
-      lval->op = mult;
-      result = MULOP2;
-      break;
-
-    case '/':
-      lval->op = divide;
-      result = MULOP2;
-      break;
-
-    case '%':
-      lval->op = module;
-      result = MULOP2;
-      break;
-
-    case '+':
-      lval->op = plus;
-      result = ADDOP2;
-      break;
-
-    case '-':
-      lval->op = minus;
-      result = ADDOP2;
-      break;
-
-    case 'n':
-    case '?':
-    case ':':
-    case '(':
-    case ')':
-      /* Nothing, just return the character.  */
-      break;
-
-    case ';':
-    case '\n':
-    case '\0':
-      /* Be safe and let the user call this function again.  */
-      --exp;
-      result = YYEOF;
-      break;
-
-    default:
-      result = YYERRCODE;
-#if YYDEBUG != 0
-      --exp;
-#endif
-      break;
-    }
-
-  *pexp = exp;
-
-  return result;
-}
-
-
-static void
-yyerror (str)
-     const char *str;
-{
-  /* Do nothing.  We don't print error messages here.  */
-}
diff --git a/newlib/libc/sys/linux/intl/plural.y b/newlib/libc/sys/linux/intl/plural.y
deleted file mode 100644
index 90b0004f5..000000000
--- a/newlib/libc/sys/linux/intl/plural.y
+++ /dev/null
@@ -1,406 +0,0 @@
-%{
-/* Expression parsing for plural form selection.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdlib.h>
-#include "gettextP.h"
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define FREE_EXPRESSION __gettext_free_exp
-#else
-# define FREE_EXPRESSION gettext_free_exp__
-# define __gettextparse gettextparse__
-#endif
-
-#define YYLEX_PARAM	&((struct parse_args *) arg)->cp
-#define YYPARSE_PARAM	arg
-%}
-%pure_parser
-%expect 7
-
-%union {
-  unsigned long int num;
-  enum operator op;
-  struct expression *exp;
-}
-
-%{
-/* Prototypes for local functions.  */
-static struct expression *new_exp PARAMS ((int nargs, enum operator op,
-					   struct expression * const *args));
-static inline struct expression *new_exp_0 PARAMS ((enum operator op));
-static inline struct expression *new_exp_1 PARAMS ((enum operator op,
-						   struct expression *right));
-static struct expression *new_exp_2 PARAMS ((enum operator op,
-					     struct expression *left,
-					     struct expression *right));
-static inline struct expression *new_exp_3 PARAMS ((enum operator op,
-						   struct expression *bexp,
-						   struct expression *tbranch,
-						   struct expression *fbranch));
-static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
-static void yyerror PARAMS ((const char *str));
-
-/* Allocation of expressions.  */
-
-static struct expression *
-new_exp (nargs, op, args)
-     int nargs;
-     enum operator op;
-     struct expression * const *args;
-{
-  int i;
-  struct expression *newp;
-
-  /* If any of the argument could not be malloc'ed, just return NULL.  */
-  for (i = nargs - 1; i >= 0; i--)
-    if (args[i] == NULL)
-      goto fail;
-
-  /* Allocate a new expression.  */
-  newp = (struct expression *) malloc (sizeof (*newp));
-  if (newp != NULL)
-    {
-      newp->nargs = nargs;
-      newp->operation = op;
-      for (i = nargs - 1; i >= 0; i--)
-	newp->val.args[i] = args[i];
-      return newp;
-    }
-
- fail:
-  for (i = nargs - 1; i >= 0; i--)
-    FREE_EXPRESSION (args[i]);
-
-  return NULL;
-}
-
-static inline struct expression *
-new_exp_0 (op)
-     enum operator op;
-{
-  return new_exp (0, op, NULL);
-}
-
-static inline struct expression *
-new_exp_1 (op, right)
-     enum operator op;
-     struct expression *right;
-{
-  struct expression *args[1];
-
-  args[0] = right;
-  return new_exp (1, op, args);
-}
-
-static struct expression *
-new_exp_2 (op, left, right)
-     enum operator op;
-     struct expression *left;
-     struct expression *right;
-{
-  struct expression *args[2];
-
-  args[0] = left;
-  args[1] = right;
-  return new_exp (2, op, args);
-}
-
-static inline struct expression *
-new_exp_3 (op, bexp, tbranch, fbranch)
-     enum operator op;
-     struct expression *bexp;
-     struct expression *tbranch;
-     struct expression *fbranch;
-{
-  struct expression *args[3];
-
-  args[0] = bexp;
-  args[1] = tbranch;
-  args[2] = fbranch;
-  return new_exp (3, op, args);
-}
-
-%}
-
-/* This declares that all operators have the same associativity and the
-   precedence order as in C.  See [Harbison, Steele: C, A Reference Manual].
-   There is no unary minus and no bitwise operators.
-   Operators with the same syntactic behaviour have been merged into a single
-   token, to save space in the array generated by bison.  */
-%right '?'		/*   ?		*/
-%left '|'		/*   ||		*/
-%left '&'		/*   &&		*/
-%left EQUOP2		/*   == !=	*/
-%left CMPOP2		/*   < > <= >=	*/
-%left ADDOP2		/*   + -	*/
-%left MULOP2		/*   * / %	*/
-%right '!'		/*   !		*/
-
-%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
-%token <num> NUMBER
-%type <exp> exp
-
-%%
-
-start:	  exp
-	  {
-	    if ($1 == NULL)
-	      YYABORT;
-	    ((struct parse_args *) arg)->res = $1;
-	  }
-	;
-
-exp:	  exp '?' exp ':' exp
-	  {
-	    $$ = new_exp_3 (qmop, $1, $3, $5);
-	  }
-	| exp '|' exp
-	  {
-	    $$ = new_exp_2 (lor, $1, $3);
-	  }
-	| exp '&' exp
-	  {
-	    $$ = new_exp_2 (land, $1, $3);
-	  }
-	| exp EQUOP2 exp
-	  {
-	    $$ = new_exp_2 ($2, $1, $3);
-	  }
-	| exp CMPOP2 exp
-	  {
-	    $$ = new_exp_2 ($2, $1, $3);
-	  }
-	| exp ADDOP2 exp
-	  {
-	    $$ = new_exp_2 ($2, $1, $3);
-	  }
-	| exp MULOP2 exp
-	  {
-	    $$ = new_exp_2 ($2, $1, $3);
-	  }
-	| '!' exp
-	  {
-	    $$ = new_exp_1 (lnot, $2);
-	  }
-	| 'n'
-	  {
-	    $$ = new_exp_0 (var);
-	  }
-	| NUMBER
-	  {
-	    if (($$ = new_exp_0 (num)) != NULL)
-	      $$->val.num = $1;
-	  }
-	| '(' exp ')'
-	  {
-	    $$ = $2;
-	  }
-	;
-
-%%
-
-void
-internal_function
-FREE_EXPRESSION (exp)
-     struct expression *exp;
-{
-  if (exp == NULL)
-    return;
-
-  /* Handle the recursive case.  */
-  switch (exp->nargs)
-    {
-    case 3:
-      FREE_EXPRESSION (exp->val.args[2]);
-      /* FALLTHROUGH */
-    case 2:
-      FREE_EXPRESSION (exp->val.args[1]);
-      /* FALLTHROUGH */
-    case 1:
-      FREE_EXPRESSION (exp->val.args[0]);
-      /* FALLTHROUGH */
-    default:
-      break;
-    }
-
-  free (exp);
-}
-
-
-static int
-yylex (lval, pexp)
-     YYSTYPE *lval;
-     const char **pexp;
-{
-  const char *exp = *pexp;
-  int result;
-
-  while (1)
-    {
-      if (exp[0] == '\0')
-	{
-	  *pexp = exp;
-	  return YYEOF;
-	}
-
-      if (exp[0] != ' ' && exp[0] != '\t')
-	break;
-
-      ++exp;
-    }
-
-  result = *exp++;
-  switch (result)
-    {
-    case '0': case '1': case '2': case '3': case '4':
-    case '5': case '6': case '7': case '8': case '9':
-      {
-	unsigned long int n = result - '0';
-	while (exp[0] >= '0' && exp[0] <= '9')
-	  {
-	    n *= 10;
-	    n += exp[0] - '0';
-	    ++exp;
-	  }
-	lval->num = n;
-	result = NUMBER;
-      }
-      break;
-
-    case '=':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = equal;
-	  result = EQUOP2;
-	}
-      else
-	result = YYERRCODE;
-      break;
-
-    case '!':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = not_equal;
-	  result = EQUOP2;
-	}
-      break;
-
-    case '&':
-    case '|':
-      if (exp[0] == result)
-	++exp;
-      else
-	result = YYERRCODE;
-      break;
-
-    case '<':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = less_or_equal;
-	}
-      else
-	lval->op = less_than;
-      result = CMPOP2;
-      break;
-
-    case '>':
-      if (exp[0] == '=')
-	{
-	  ++exp;
-	  lval->op = greater_or_equal;
-	}
-      else
-	lval->op = greater_than;
-      result = CMPOP2;
-      break;
-
-    case '*':
-      lval->op = mult;
-      result = MULOP2;
-      break;
-
-    case '/':
-      lval->op = divide;
-      result = MULOP2;
-      break;
-
-    case '%':
-      lval->op = module;
-      result = MULOP2;
-      break;
-
-    case '+':
-      lval->op = plus;
-      result = ADDOP2;
-      break;
-
-    case '-':
-      lval->op = minus;
-      result = ADDOP2;
-      break;
-
-    case 'n':
-    case '?':
-    case ':':
-    case '(':
-    case ')':
-      /* Nothing, just return the character.  */
-      break;
-
-    case ';':
-    case '\n':
-    case '\0':
-      /* Be safe and let the user call this function again.  */
-      --exp;
-      result = YYEOF;
-      break;
-
-    default:
-      result = YYERRCODE;
-#if YYDEBUG != 0
-      --exp;
-#endif
-      break;
-    }
-
-  *pexp = exp;
-
-  return result;
-}
-
-
-static void
-yyerror (str)
-     const char *str;
-{
-  /* Do nothing.  We don't print error messages here.  */
-}
diff --git a/newlib/libc/sys/linux/intl/stpcpy.c b/newlib/libc/sys/linux/intl/stpcpy.c
deleted file mode 100644
index 0af6c67c8..000000000
--- a/newlib/libc/sys/linux/intl/stpcpy.c
+++ /dev/null
@@ -1,10 +0,0 @@
-char *
-__stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-
diff --git a/newlib/libc/sys/linux/intl/textdomain.c b/newlib/libc/sys/linux/intl/textdomain.c
deleted file mode 100644
index b03ad8079..000000000
--- a/newlib/libc/sys/linux/intl/textdomain.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Implementation of the textdomain(3) function.
-   Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) (bcopy (Src, Dst, Num), (Dst))
-# endif
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgnuintl.h"
-#endif
-#include "gettextP.h"
-
-#ifdef _LIBC
-/* We have to handle multi-threaded applications.  */
-# include <bits/libc-lock.h>
-#else
-/* Provide dummy implementation if this is outside glibc.  */
-# define __libc_rwlock_define(CLASS, NAME)
-# define __libc_rwlock_wrlock(NAME)
-# define __libc_rwlock_unlock(NAME)
-#endif
-
-/* The internal variables in the standalone libintl.a must have different
-   names than the internal variables in GNU libc, otherwise programs
-   using libintl.a cannot be linked statically.  */
-#if !defined _LIBC
-# define _nl_default_default_domain _nl_default_default_domain__
-# define _nl_current_default_domain _nl_current_default_domain__
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Name of the default text domain.  */
-extern const char _nl_default_default_domain[];
-
-/* Default text domain in which entries for gettext(3) are to be found.  */
-extern const char *_nl_current_default_domain;
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define TEXTDOMAIN __textdomain
-# ifdef _GLIBC
-#  ifndef strdup
-#   define strdup(str) __strdup (str)
-#  endif
-# endif
-#else
-# define TEXTDOMAIN textdomain__
-#endif
-
-/* Lock variable to protect the global data in the gettext implementation.  */
-__libc_rwlock_define (extern, _nl_state_lock)
-
-/* Set the current default message catalog to DOMAINNAME.
-   If DOMAINNAME is null, return the current default.
-   If DOMAINNAME is "", reset to the default of "messages".  */
-char *
-TEXTDOMAIN (domainname)
-     const char *domainname;
-{
-  char *new_domain;
-  char *old_domain;
-
-  /* A NULL pointer requests the current setting.  */
-  if (domainname == NULL)
-    return (char *) _nl_current_default_domain;
-
-  __libc_rwlock_wrlock (_nl_state_lock);
-
-  old_domain = (char *) _nl_current_default_domain;
-
-  /* If domain name is the null string set to default domain "messages".  */
-  if (domainname[0] == '\0'
-      || strcmp (domainname, _nl_default_default_domain) == 0)
-    {
-      _nl_current_default_domain = _nl_default_default_domain;
-      new_domain = (char *) _nl_current_default_domain;
-    }
-  else if (strcmp (domainname, old_domain) == 0)
-    /* This can happen and people will use it to signal that some
-       environment variable changed.  */
-    new_domain = old_domain;
-  else
-    {
-      /* If the following malloc fails `_nl_current_default_domain'
-	 will be NULL.  This value will be returned and so signals we
-	 are out of core.  */
-#if defined _LIBC || defined HAVE_STRDUP
-      new_domain = strdup (domainname);
-#else
-      size_t len = strlen (domainname) + 1;
-      new_domain = (char *) malloc (len);
-      if (new_domain != NULL)
-	memcpy (new_domain, domainname, len);
-#endif
-
-      if (new_domain != NULL)
-	_nl_current_default_domain = new_domain;
-    }
-
-  /* We use this possibility to signal a change of the loaded catalogs
-     since this is most likely the case and there is no other easy we
-     to do it.  Do it only when the call was successful.  */
-  if (new_domain != NULL)
-    {
-      ++_nl_msg_cat_cntr;
-
-      if (old_domain != new_domain && old_domain != _nl_default_default_domain)
-	free (old_domain);
-    }
-
-  __libc_rwlock_unlock (_nl_state_lock);
-
-  return new_domain;
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__textdomain, textdomain);
-#endif
diff --git a/newlib/libc/sys/linux/io.c b/newlib/libc/sys/linux/io.c
deleted file mode 100644
index d6731144a..000000000
--- a/newlib/libc/sys/linux/io.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* libc/sys/linux/io.c - Basic input/output system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#define __KERNEL_PROTOTYPES
-
-#include <stdarg.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/uio.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <poll.h>
-#include <machine/syscall.h>
-
-
-#define __NR___ioctl __NR_ioctl
-#define __NR___flock __NR_flock
-#define __NR___mknod __NR_mknod
-
-_syscall3(ssize_t,read,int,fd,void *,buf,size_t,count)
-_syscall3(ssize_t,write,int,fd,const void *,buf,size_t,count)
-_syscall3(int,open,const char *,file,int,flag,mode_t,mode)
-_syscall1(int,close,int,fd)
-_syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
-_syscall0(int,sync)
-_syscall1(int,dup,int,fd)
-_syscall2(int,dup2,int,oldfd,int,newfd)
-_syscall3(int,fcntl,int,fd,int,cmd,long,arg)
-_syscall1(int,fdatasync,int,fd)
-_syscall1(int,fsync,int,fd)
-_syscall3(int,poll,struct pollfd *,fds,nfds_t,nfds,int,timeout)
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-_syscall3(ssize_t,readv,int,fd,const struct iovec *,vec,int,count)
-_syscall3(ssize_t,writev,int,fd,const struct iovec *,buf,int,count)
-#endif
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-_syscall2(int,ftruncate,int,fd,off_t,len)
-_syscall2(int,truncate,const char *,path,off_t,len)
-#endif
-
-static _syscall3(int,__ioctl,int,fd,int,request,void *,arg)
-
-int ioctl(int fd,int request,...)
-{
-    va_list ap;
-    int res;
-
-    va_start(ap,request);
-    res = __ioctl(fd,request,va_arg(ap,void *));
-    va_end(ap);
-    return res;
-}
-
-static _syscall2(long,__flock,unsigned int,fd,unsigned int,cmd)
-
-int flock(int fd,int operation)
-{
-    return __flock(fd,operation);
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-
-static _syscall3(int,__mknod,const char *,path,mode_t,mode,dev_t *,dev)
-
-int mkfifo(const char *path, mode_t mode)
-{
-   dev_t dev = 0;
-   return __mknod(path, mode | S_IFIFO, &dev);
-}
-#endif
-
-weak_alias(__libc_close,__close);
-weak_alias(__libc_fcntl,__fcntl);
-weak_alias(__libc_lseek,__lseek);
-weak_alias(__libc_open,__open);
-weak_alias(__libc_read,__read);
-weak_alias(__libc_write,__write);
-weak_alias(__libc_poll,__poll);
-
diff --git a/newlib/libc/sys/linux/io64.c b/newlib/libc/sys/linux/io64.c
deleted file mode 100644
index 7f87c1e9b..000000000
--- a/newlib/libc/sys/linux/io64.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* libc/sys/linux/io64.c - large file input/output system calls */
-
-/* Copyright 2002, Red Hat Inc. */
-
-
-#define __KERNEL_PROTOTYPES
-
-#include <stdarg.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/uio.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <machine/syscall.h>
-
-#define __NR___truncate64 __NR_truncate64
-#define __NR___ftruncate64 __NR_ftruncate64
-
-_syscall2(int,fstat64,int,fd,struct stat64 *,st)
-_syscall2(int,lstat64,const char *,name,struct stat64 *,st)
-_syscall2(int,stat64,const char *,name,struct stat64 *,st)
-
-static _syscall3(int,__truncate64,const char *,name,int,high,int,low)
-
-int __libc_truncate64(const char *name, off64_t length)
-{
-  return __truncate64(name,(length >> 32), (length & 0xffffffff));
-}
-weak_alias(__libc_truncate64,truncate64)
-
-static _syscall3(int,__ftruncate64,int,fd,int,high,int,low);
-
-int __libc_ftruncate64(int fd, off64_t length)
-{
-  return __ftruncate64(fd,(length >> 32),(length & 0xffffffff));
-}
-weak_alias(__libc_ftruncate64,ftruncate64)
-
-static _syscall5(void,_llseek,int,fd,off_t,hi,off_t,lo,loff_t *,pos,int,whence)
-
-loff_t __libc_lseek64(int fd, loff_t offset, int whence)
-{
-  loff_t pos;
-  __libc__llseek(fd, offset >> 32, offset & 0xffffffff, &pos, whence);
-  return pos;
-}
-weak_alias(__libc_lseek64,lseek64);
-weak_alias(__libc_lseek64,_lseek64);
-
-int __libc_open64(const char *path, int oflag, ...)
-{
-   mode_t mode = 0;
-   if (oflag & O_CREAT)
-     {
-       va_list list;
-       va_start(list, oflag);
-       mode = va_arg(list, int);
-       va_end(list);
-     }
-   return __libc_open(path, oflag | O_LARGEFILE, mode);
-}
-weak_alias(__libc_open64,open64);
-weak_alias(__libc_open64,_open64);
-weak_alias(__libc_open64,__open64);
-weak_alias(__libc_fstat64,_fstat64);
-
-
diff --git a/newlib/libc/sys/linux/ipc.c b/newlib/libc/sys/linux/ipc.c
deleted file mode 100644
index 31e225255..000000000
--- a/newlib/libc/sys/linux/ipc.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* libc/sys/linux/ipc.c - IPC semaphore and message queue functions */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <sys/types.h>
-#include <sys/sem.h>
-#include <sys/msg.h>
-#include <stdarg.h>
-
-#include <machine/syscall.h>
-
-#define IPC_64 0x100
-
-#define IPCOP_semop	1
-#define IPCOP_semget	2
-#define IPCOP_semctl	3
-#define IPCOP_msgsnd	11
-#define IPCOP_msgrcv	12
-#define IPCOP_msgget	13
-#define IPCOP_msgctl	14
-
-static _syscall5(int,ipc,int,op,int,arg1,int,arg2,int,arg3,void *,arg4);
-
-int
-semget (key_t key, int nsems, int semflgs)
-{
-  return __libc_ipc(IPCOP_semget, (int)key, nsems, semflgs, NULL);
-}
-
-int
-semctl (int semid, int semnum, int cmd, ...)
-{
-  va_list va;
-  union semun {
-    int val;
-    struct semid_ds *buf;
-    unsigned short  *array;
-  } arg;
-
-  va_start (va, cmd);
-
-  arg = va_arg (va, union semun);
-
-  va_end (va);
-
-  return __libc_ipc(IPCOP_semctl, semid, semnum, cmd | IPC_64, &arg);
-}
-
-int
-semop (int semid, struct sembuf *sops, size_t nsems)
-{
-  return __libc_ipc(IPCOP_semop, semid, (int)nsems, 0, sops);
-}
-
-int
-msgget (key_t key, int msgflg)
-{
-  return __libc_ipc(IPCOP_msgget, (int)key, msgflg, 0, NULL);
-}
-
-int
-msgctl (int msqid, int cmd, struct msqid_ds *buf)
-{
-  return __libc_ipc(IPCOP_msgctl, msqid, cmd | IPC_64, 0, buf);
-}
-
-int
-msgsnd (int msqid, const void *msgp, size_t msgsz, int msgflg)
-{
-  return __libc_ipc(IPCOP_msgsnd, msqid, (int)msgsz, msgflg, (void *)msgp);
-}
-
-int
-msgrcv (int msqid, void *msgp, size_t msgsz, long int msgtyp, int msgflg)
-{
-  /* last argument must contain multiple args */
-  struct {
-    void *msgp;
-    long int msgtyp;
-  } args;
-
-  args.msgp = msgp;
-  args.msgtyp = msgtyp;
-
-  return (ssize_t)__libc_ipc(IPCOP_msgrcv, msqid, (int)msgsz, msgflg, &args);
-}
-
diff --git a/newlib/libc/sys/linux/kernel_sigaction.h b/newlib/libc/sys/linux/kernel_sigaction.h
deleted file mode 100644
index d005cbce9..000000000
--- a/newlib/libc/sys/linux/kernel_sigaction.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* This is the sigaction structure from the Linux 2.1.20 kernel.  */
-
-#define HAVE_SA_RESTORER
-
-struct old_kernel_sigaction {
-	__sighandler_t k_sa_handler;
-	unsigned long sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer) (void);
-};
-
-/* This is the sigaction structure from the Linux 2.1.68 kernel.  */
-
-struct kernel_sigaction {
-	__sighandler_t k_sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer) (void);
-	sigset_t sa_mask;
-};
diff --git a/newlib/libc/sys/linux/libc-internal.h b/newlib/libc/sys/linux/libc-internal.h
deleted file mode 100644
index 8369ffec2..000000000
--- a/newlib/libc/sys/linux/libc-internal.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* This file contains a number of internal prototype declarations that
-   don't fit anywhere else.  */
-
-#ifndef _LIBC_INTERNAL
-# define _LIBC_INTERNAL 1
-
-#include <hp-timing.h>
-
-/* Initialize the `__libc_enable_secure' flag.  */
-extern void __libc_init_secure (void);
-
-/* This function will be called from _init in init-first.c.  */
-extern void __libc_global_ctors (void);
-
-/* Discover the tick frequency of the machine if something goes wrong,
-   we return 0, an impossible hertz.  */
-extern int __profile_frequency (void);
-
-/* Hooks for the instrumenting functions.  */
-extern void __cyg_profile_func_enter (void *this_fn, void *call_site);
-extern void __cyg_profile_func_exit (void *this_fn, void *call_site);
-
-/* Get frequency of the system processor.  */
-extern hp_timing_t __get_clockfreq (void);
-
-/* Free all allocated resources.  */
-extern void __libc_freeres (void);
-
-#endif /* _LIBC_INTERNAL  */
diff --git a/newlib/libc/sys/linux/libc-symbols.h b/newlib/libc/sys/linux/libc-symbols.h
deleted file mode 100644
index 97b672643..000000000
--- a/newlib/libc/sys/linux/libc-symbols.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/* Support macros for making weak and strong aliases for symbols,
-   and for using symbol sets and linker warnings with GNU ld.
-   Copyright (C) 1995,1996,1997,1998,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LIBC_SYMBOLS_H
-#define _LIBC_SYMBOLS_H	1
-
-/* This file's macros are included implicitly in the compilation of every
-   file in the C library by -imacros.
-
-   We include config.h which is generated by configure.
-   It should define for us the following symbols:
-
-   * HAVE_ASM_SET_DIRECTIVE if we have `.set B, A' instead of `A = B'.
-   * ASM_GLOBAL_DIRECTIVE with `.globl' or `.global'.
-   * HAVE_GNU_LD if using GNU ld, with support for weak symbols in a.out,
-   and for symbol set and warning messages extensions in a.out and ELF.
-   * HAVE_ELF if using ELF, which supports weak symbols using `.weak'.
-   * HAVE_ASM_WEAK_DIRECTIVE if we have weak symbols using `.weak'.
-   * HAVE_ASM_WEAKEXT_DIRECTIVE if we have weak symbols using `.weakext'.
-
-   */
-
-/* This is defined for the compilation of all C library code.  features.h
-   tests this to avoid inclusion of stubs.h while compiling the library,
-   before stubs.h has been generated.  Some library code that is shared
-   with other packages also tests this symbol to see if it is being
-   compiled as part of the C library.  We must define this before including
-   config.h, because it makes some definitions conditional on whether libc
-   itself is being compiled, or just some generator program.  */
-#define _LIBC	1
-
-/* Enable declarations of GNU extensions, since we are compiling them.  */
-#define _GNU_SOURCE	1
-/* And we also need the data for the reentrant functions.  */
-#define _REENTRANT	1
-
-#include <config.h>
-
-/* The symbols in all the user (non-_) macros are C symbols.
-   HAVE_GNU_LD without HAVE_ELF implies a.out.  */
-
-#if defined HAVE_ASM_WEAK_DIRECTIVE || defined HAVE_ASM_WEAKEXT_DIRECTIVE
-# define HAVE_WEAK_SYMBOLS
-#endif
-
-#ifndef __SYMBOL_PREFIX
-# ifdef NO_UNDERSCORES
-#  define __SYMBOL_PREFIX
-# else
-#  define __SYMBOL_PREFIX "_"
-# endif
-#endif
-
-#ifndef C_SYMBOL_NAME
-# ifdef NO_UNDERSCORES
-#  define C_SYMBOL_NAME(name) name
-# else
-#  define C_SYMBOL_NAME(name) _##name
-# endif
-#endif
-
-#ifndef ASM_LINE_SEP
-# define ASM_LINE_SEP ;
-#endif
-
-#ifndef C_SYMBOL_DOT_NAME
-# define C_SYMBOL_DOT_NAME(name) .##name
-#endif
-
-#ifndef __ASSEMBLER__
-/* GCC understands weak symbols and aliases; use its interface where
-   possible, instead of embedded assembly language.  */
-
-/* Define ALIASNAME as a strong alias for NAME.  */
-# define strong_alias(name, aliasname) _strong_alias(name, aliasname)
-# define _strong_alias(name, aliasname) \
-  extern __typeof (name) aliasname __attribute__ ((alias (#name)));
-
-/* This comes between the return type and function name in
-   a function definition to make that definition weak.  */
-# define weak_function __attribute__ ((weak))
-# define weak_const_function __attribute__ ((weak, __const__))
-
-# ifdef HAVE_WEAK_SYMBOLS
-
-/* Define ALIASNAME as a weak alias for NAME.
-   If weak aliases are not available, this defines a strong alias.  */
-#  define weak_alias(name, aliasname) _weak_alias (name, aliasname)
-#  define _weak_alias(name, aliasname) \
-  extern __typeof (name) aliasname __attribute__ ((weak, alias (#name)));
-
-/* Declare SYMBOL as weak undefined symbol (resolved to 0 if not defined).  */
-#  define weak_extern(symbol) _weak_extern (symbol)
-#  ifdef HAVE_ASM_WEAKEXT_DIRECTIVE
-#   define _weak_extern(symbol) asm (".weakext " __SYMBOL_PREFIX #symbol);
-#  else
-#   define _weak_extern(symbol)    asm (".weak " __SYMBOL_PREFIX #symbol);
-#  endif
-
-# else
-
-#  define weak_alias(name, aliasname) strong_alias(name, aliasname)
-#  define weak_extern(symbol) /* Nothing. */
-
-# endif
-
-#else /* __ASSEMBLER__ */
-
-# ifdef HAVE_ASM_SET_DIRECTIVE
-#  define strong_alias(original, alias)		\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  .set C_SYMBOL_NAME (alias),C_SYMBOL_NAME (original)
-# else
-#  ifdef HAVE_ASM_GLOBAL_DOT_NAME
-#   define strong_alias(original, alias)	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original) ASM_LINE_SEP	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_DOT_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_DOT_NAME (alias) = C_SYMBOL_DOT_NAME (original)
-#  else
-#   define strong_alias(original, alias)	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original)
-#  endif
-# endif
-
-# ifdef HAVE_WEAK_SYMBOLS
-#  ifdef HAVE_ASM_WEAKEXT_DIRECTIVE
-#   define weak_alias(original, alias)	\
-  .weakext C_SYMBOL_NAME (alias), C_SYMBOL_NAME (original)
-#   define weak_extern(symbol)	\
-  .weakext C_SYMBOL_NAME (symbol)
-
-#  else /* ! HAVE_ASM_WEAKEXT_DIRECTIVE */
-
-#   ifdef HAVE_ASM_GLOBAL_DOT_NAME
-#    define weak_alias(original, alias)	\
-  .weak C_SYMBOL_NAME (alias) ASM_LINE_SEP			\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original) ASM_LINE_SEP	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_DOT_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_DOT_NAME (alias) = C_SYMBOL_DOT_NAME (original)
-#   else
-#    define weak_alias(original, alias)	\
-  .weak C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original)
-#   endif
-
-#   define weak_extern(symbol)	\
-  .weak C_SYMBOL_NAME (symbol)
-
-#  endif /* ! HAVE_ASM_WEAKEXT_DIRECTIVE */
-
-# else /* ! HAVE_WEAK_SYMBOLS */
-
-#  define weak_alias(original, alias) strong_alias(original, alias)
-#  define weak_extern(symbol) /* Nothing */
-# endif /* ! HAVE_WEAK_SYMBOLS */
-
-#endif /* __ASSEMBLER__ */
-
-/* On some platforms we can make internal function calls (i.e., calls of
-   functions not exported) a bit faster by using a different calling
-   convention.  */
-#ifndef internal_function
-# define internal_function	/* empty */
-#endif
-
-/* Prepare for the case that `__builtin_expect' is not available.  */
-#ifndef HAVE_BUILTIN_EXPECT
-# define __builtin_expect(expr, val) (expr)
-#endif
-
-/* Determine the return address.  */
-#define RETURN_ADDRESS(nr) \
-  __builtin_extract_return_addr (__builtin_return_address (nr))
-
-/* When a reference to SYMBOL is encountered, the linker will emit a
-   warning message MSG.  */
-#ifdef HAVE_GNU_LD
-# ifdef HAVE_ELF
-
-/* We want the .gnu.warning.SYMBOL section to be unallocated.  */
-#  ifdef HAVE_ASM_PREVIOUS_DIRECTIVE
-#   define __make_section_unallocated(section_string)	\
-  asm (".section " section_string "\n\t.previous");
-#  elif defined HAVE_ASM_POPSECTION_DIRECTIVE
-#   define __make_section_unallocated(section_string)	\
-  asm (".pushsection " section_string "\n\t.popsection");
-#  else
-#   define __make_section_unallocated(section_string)
-#  endif
-
-/* Tacking on "\n\t#" to the section name makes gcc put it's bogus
-   section attributes on what looks like a comment to the assembler.  */
-#  ifdef HAVE_SECTION_QUOTES
-#   define link_warning(symbol, msg) \
-  __make_section_unallocated (".gnu.warning." #symbol) \
-  static const char __evoke_link_warning_##symbol[]	\
-    __attribute__ ((section (".gnu.warning." #symbol "\"\n\t#\""))) = msg;
-#  else
-#   define link_warning(symbol, msg) \
-  __make_section_unallocated (".gnu.warning." #symbol) \
-  static const char __evoke_link_warning_##symbol[]	\
-    __attribute__ ((section (".gnu.warning." #symbol "\n\t#"))) = msg;
-#  endif
-# else /* Not ELF: a.out */
-#  ifdef HAVE_XCOFF
-/* XCOFF does not support .stabs.
-   The native aix linker will remove the .stab and .stabstr sections
-   The gnu linker will have a fatal error if there is a relocation for
-   symbol in the .stab section.  Silently disable this macro.  */
-#   define link_warning(symbol, msg) 
-#  else
-#   define link_warning(symbol, msg)		\
-     asm (".stabs \"" msg "\",30,0,0,0\n\t"	\
-          ".stabs \"" __SYMBOL_PREFIX #symbol "\",1,0,0,0\n");
-#  endif /* XCOFF */
-# endif
-#else
-/* We will never be heard; they will all die horribly.  */
-# define link_warning(symbol, msg)
-#endif
-
-/* A canned warning for sysdeps/stub functions.  */
-#define	stub_warning(name) \
-  link_warning (name, \
-		"warning: " #name " is not implemented and will always fail")
-
-/*
-
-*/
-
-#ifdef HAVE_GNU_LD
-
-/* Symbol set support macros.  */
-
-# ifdef HAVE_ELF
-
-/* Make SYMBOL, which is in the text segment, an element of SET.  */
-#  define text_set_element(set, symbol)	_elf_set_element(set, symbol)
-/* Make SYMBOL, which is in the data segment, an element of SET.  */
-#  define data_set_element(set, symbol)	_elf_set_element(set, symbol)
-/* Make SYMBOL, which is in the bss segment, an element of SET.  */
-#  define bss_set_element(set, symbol)	_elf_set_element(set, symbol)
-
-/* These are all done the same way in ELF.
-   There is a new section created for each set.  */
-#  ifdef SHARED
-/* When building a shared library, make the set section writable,
-   because it will need to be relocated at run time anyway.  */
-#   define _elf_set_element(set, symbol) \
-  static const void *__elf_set_##set##_element_##symbol##__ \
-    __attribute__ ((unused, section (#set))) = &(symbol)
-#  else
-#   define _elf_set_element(set, symbol) \
-  static const void *const __elf_set_##set##_element_##symbol##__ \
-    __attribute__ ((unused, section (#set))) = &(symbol)
-#  endif
-
-/* Define SET as a symbol set.  This may be required (it is in a.out) to
-   be able to use the set's contents.  */
-#  define symbol_set_define(set)	symbol_set_declare(set)
-
-/* Declare SET for use in this module, if defined in another module.  */
-#  define symbol_set_declare(set) \
-  extern void *const __start_##set __attribute__ ((__weak__));		\
-  extern void *const __stop_##set __attribute__ ((__weak__));		\
-  weak_extern (__start_##set) weak_extern (__stop_##set)
-
-/* Return a pointer (void *const *) to the first element of SET.  */
-#  define symbol_set_first_element(set)	(&__start_##set)
-
-/* Return true iff PTR (a void *const *) has been incremented
-   past the last element in SET.  */
-#  define symbol_set_end_p(set, ptr)	((ptr) >= &__stop_##set)
-
-# else	/* Not ELF: a.out.  */
-
-#  ifdef HAVE_XCOFF
-/* XCOFF does not support .stabs.
-   The native aix linker will remove the .stab and .stabstr sections
-   The gnu linker will have a fatal error if there is a relocation for
-   symbol in the .stab section.  Silently disable these macros.  */
-#   define text_set_element(set, symbol) 
-#   define data_set_element(set, symbol) 
-#   define bss_set_element(set, symbol)	 
-#  else
-#   define text_set_element(set, symbol)	\
-    asm (".stabs \"" __SYMBOL_PREFIX #set "\",23,0,0," __SYMBOL_PREFIX #symbol)
-#   define data_set_element(set, symbol)	\
-    asm (".stabs \"" __SYMBOL_PREFIX #set "\",25,0,0," __SYMBOL_PREFIX #symbol)
-#   define bss_set_element(set, symbol)	?error Must use initialized data.
-#  endif /* XCOFF */
-#  define symbol_set_define(set)	void *const (set)[1];
-#  define symbol_set_declare(set)	extern void *const (set)[1];
-
-#  define symbol_set_first_element(set)	&(set)[1]
-#  define symbol_set_end_p(set, ptr)	(*(ptr) == 0)
-
-# endif	/* ELF.  */
-#else
-/* We cannot do anything in generial.  */
-# define text_set_element(set, symbol) asm ("")
-# define data_set_element(set, symbol) asm ("")
-# define bss_set_element(set, symbol) asm ("")
-# define symbol_set_define(set)		void *const (set)[1];
-# define symbol_set_declare(set)	extern void *const (set)[1];
-
-# define symbol_set_first_element(set)	&(set)[1]
-# define symbol_set_end_p(set, ptr)	(*(ptr) == 0)
-#endif	/* Have GNU ld.  */
-
-#if DO_VERSIONING
-# define symbol_version(real, name, version) \
-     _symbol_version(real, name, version)
-# define default_symbol_version(real, name, version) \
-     _default_symbol_version(real, name, version)
-# ifdef __ASSEMBLER__
-#  define _symbol_version(real, name, version) \
-     .symver real, name##@##version
-#  define _default_symbol_version(real, name, version) \
-     .symver real, name##@##@##version
-# else
-#  define _symbol_version(real, name, version) \
-     __asm__ (".symver " #real "," #name "@" #version)
-#  define _default_symbol_version(real, name, version) \
-     __asm__ (".symver " #real "," #name "@@" #version)
-# endif
-#else
-# define symbol_version(real, name, version)
-# define default_symbol_version(real, name, version) \
-  strong_alias(real, name)
-#endif
-
-#endif /* libc-symbols.h */
diff --git a/newlib/libc/sys/linux/libc-tsd.h b/newlib/libc/sys/linux/libc-tsd.h
deleted file mode 100644
index 7a532ea74..000000000
--- a/newlib/libc/sys/linux/libc-tsd.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* libc-internal interface for thread-specific data.  LinuxThreads version.
-   Copyright (C) 1997, 1998, 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _BITS_LIBC_TSD_H
-#define _BITS_LIBC_TSD_H 1
-
-
-/* Fast thread-specific data internal to libc.  */
-enum __libc_tsd_key_t { _LIBC_TSD_KEY_MALLOC = 0,
-			_LIBC_TSD_KEY_DL_ERROR,
-			_LIBC_TSD_KEY_RPC_VARS,
-			_LIBC_TSD_KEY_N };
-
-extern void *(*__libc_internal_tsd_get) (enum __libc_tsd_key_t) __THROW;
-extern int (*__libc_internal_tsd_set) (enum __libc_tsd_key_t,
-				       __const void *)  __THROW;
-
-#define __libc_tsd_define(CLASS, KEY)	CLASS void *__libc_tsd_##KEY##_data;
-#define __libc_tsd_get(KEY) \
-  (__libc_internal_tsd_get != NULL \
-   ? __libc_internal_tsd_get (_LIBC_TSD_KEY_##KEY) \
-   : __libc_tsd_##KEY##_data)
-#define __libc_tsd_set(KEY, VALUE) \
-  (__libc_internal_tsd_set != NULL \
-   ? __libc_internal_tsd_set (_LIBC_TSD_KEY_##KEY, (VALUE)) \
-   : ((__libc_tsd_##KEY##_data = (VALUE)), 0))
-
-#endif	/* bits/libc-tsd.h */
diff --git a/newlib/libc/sys/linux/libintl.h b/newlib/libc/sys/linux/libintl.h
deleted file mode 100644
index 203a2c852..000000000
--- a/newlib/libc/sys/linux/libintl.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* temporary internal libintl.h to ignore message translation for now */
-
-#ifndef _LIBINTL_H
-#define _LIBINTL_H      1
-
-#undef _
-#define _(x) (x)
-
-#endif
diff --git a/newlib/libc/sys/linux/linux.c b/newlib/libc/sys/linux/linux.c
deleted file mode 100644
index ae11c3ffb..000000000
--- a/newlib/libc/sys/linux/linux.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* libc/sys/linux/linux.c - System-specific system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-/*
- * Most system call wrappers have moved to utilities; future fate of this file
- * is guided by glibc/autoconf compatibility and FFS
- */
-
-#include <machine/syscall.h>
-
-
-/* _syscall1(int,delete_module,const char *,name) */
diff --git a/newlib/libc/sys/linux/linux_fsinfo.h b/newlib/libc/sys/linux/linux_fsinfo.h
deleted file mode 100644
index 692abe5de..000000000
--- a/newlib/libc/sys/linux/linux_fsinfo.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Constants from kernel header for various FSes.
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LINUX_FSINFO_H
-#define _LINUX_FSINFO_H	1
-
-/* These definitions come from the kernel headers.  But we cannot
-   include the headers here because of type clashes.  If new
-   filesystem types will become available we have to add the
-   appropriate definitions here.*/
-
-/* Constants that identify the `adfs' filesystem.  */
-#define ADFS_SUPER_MAGIC	0xadf5
-
-/* Constants that identify the `affs' filesystem.  */
-#define AFFS_SUPER_MAGIC	0xadff
-
-/* Constants that identify the `bfs' filesystem.  */
-#define BFS_MAGIC		0x1BADFACE
-
-/* Constants that identify the `coda' filesystem.  */
-#define CODA_SUPER_MAGIC	0x73757245
-
-/* Constants that identify the `coherent' filesystem.  */
-#define COH_SUPER_MAGIC		0x012ff7b7
-
-/* Constant that identifies the `devfs' filesystem.  */
-#define DEVFS_SUPER_MAGIC	0x1373
-
-/* Constant that identifies the `devpts' filesystem.  */
-#define DEVPTS_SUPER_MAGIC	0x1cd1
-
-/* Constant that identifies the `efs' filesystem.  */
-#define EFS_SUPER_MAGIC		0x414A53
-
-/* Constant that identifies the `ext2' and `ext3' filesystems.  */
-#define EXT2_SUPER_MAGIC	0xef53
-
-/* Constant that identifies the `hpfs' filesystem.  */
-#define HPFS_SUPER_MAGIC	0xf995e849
-
-/* Constant that identifies the `iso9660' filesystem.  */
-#define ISOFS_SUPER_MAGIC	0x9660
-
-/* Constants that identify the `minix2' filesystem.  */
-#define MINIX2_SUPER_MAGIC	0x2468
-#define MINIX2_SUPER_MAGIC2	0x2478
-
-/* Constants that identify the `minix' filesystem.  */
-#define MINIX_SUPER_MAGIC	0x137f
-#define MINIX_SUPER_MAGIC2	0x138F
-
-/* Constants that identify the `msdos' filesystem.  */
-#define MSDOS_SUPER_MAGIC	0x4d44
-
-/* Constants that identify the `ncp' filesystem.  */
-#define NCP_SUPER_MAGIC		0x564c
-
-/* Constants that identify the `nfs' filesystem.  */
-#define NFS_SUPER_MAGIC		0x6969
-
-/* Constants that identify the `proc' filesystem.  */
-#define PROC_SUPER_MAGIC	0x9fa0
-
-/* Constants that identify the `qnx4' filesystem.  */
-#define QNX4_SUPER_MAGIC	0x002f
-
-/* Constants that identify the `reiser' filesystem.  */
-#define REISERFS_SUPER_MAGIC	0x52654973
-
-/* Constants that identify the `smb' filesystem.  */
-#define SMB_SUPER_MAGIC		0x517b
-
-/* Constants that identify the `sysV' filesystem.  */
-#define SYSV2_SUPER_MAGIC	0x012ff7b6
-#define SYSV4_SUPER_MAGIC	0x012ff7b5
-
-/* Constants that identify the `ufs' filesystem.  */
-#define UFS_MAGIC		0x00011954
-#define UFS_CIGAM		0x54190100 /* byteswapped MAGIC */
-
-/* Constants that identify the `xenix' filesystem.  */
-#define XENIX_SUPER_MAGIC	0x012ff7b4
-
-/* Constant that identifies the `shm' filesystem.  */
-#define SHMFS_SUPER_MAGIC	0x01021994
-
-/* Maximum link counts.  */
-#define COH_LINK_MAX		10000
-#define EXT2_LINK_MAX		32000
-#define MINIX2_LINK_MAX		65530
-#define MINIX_LINK_MAX		250
-#define REISERFS_LINK_MAX	64535
-#define SYSV_LINK_MAX		126     /* 127? 251? */
-#define UFS_LINK_MAX		EXT2_LINK_MAX
-#define XENIX_LINK_MAX		126     /* ?? */
-
-#endif	/* linux_fsinfo.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/LICENSE b/newlib/libc/sys/linux/linuxthreads/LICENSE
deleted file mode 100644
index 7bcca6050..000000000
--- a/newlib/libc/sys/linux/linuxthreads/LICENSE
+++ /dev/null
@@ -1,501 +0,0 @@
-GNU LIBRARY GENERAL PUBLIC LICENSE
-**********************************
-
-                         Version 2, June 1991
-
-     Copyright (C) 1991 Free Software Foundation, Inc.
-     59 Temple Place -- Suite 330, Boston, MA 02111-1307, USA
-     
-     Everyone is permitted to copy and distribute verbatim copies
-     of this license document, but changing it is not allowed.
-     
-     [This is the first released version of the library GPL.  It is
-      numbered 2 because it goes with version 2 of the ordinary GPL.]
-
-Preamble
-========
-
-   The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-   This license, the Library General Public License, applies to some
-specially designated Free Software Foundation software, and to any
-other libraries whose authors decide to use it.  You can use it for
-your libraries, too.
-
-   When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it in
-new free programs; and that you know you can do these things.
-
-   To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the library, or if you modify it.
-
-   For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link a program with the library, you must provide
-complete object files to the recipients so that they can relink them
-with the library, after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-   Our method of protecting your rights has two steps: (1) copyright
-the library, and (2) offer you this license which gives you legal
-permission to copy, distribute and/or modify the library.
-
-   Also, for each distributor's protection, we want to make certain
-that everyone understands that there is no warranty for this free
-library.  If the library is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original
-version, so that any problems introduced by others will not reflect on
-the original authors' reputations.
-
-   Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that companies distributing free
-software will individually obtain patent licenses, thus in effect
-transforming the program into proprietary software.  To prevent this,
-we have made it clear that any patent must be licensed for everyone's
-free use or not licensed at all.
-
-   Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License, which was designed for utility
-programs.  This license, the GNU Library General Public License,
-applies to certain designated libraries.  This license is quite
-different from the ordinary one; be sure to read it in full, and don't
-assume that anything in it is the same as in the ordinary license.
-
-   The reason we have a separate public license for some libraries is
-that they blur the distinction we usually make between modifying or
-adding to a program and simply using it.  Linking a program with a
-library, without changing the library, is in some sense simply using
-the library, and is analogous to running a utility program or
-application program.  However, in a textual and legal sense, the linked
-executable is a combined work, a derivative of the original library,
-and the ordinary General Public License treats it as such.
-
-   Because of this blurred distinction, using the ordinary General
-Public License for libraries did not effectively promote software
-sharing, because most developers did not use the libraries.  We
-concluded that weaker conditions might promote sharing better.
-
-   However, unrestricted linking of non-free programs would deprive the
-users of those programs of all benefit from the free status of the
-libraries themselves.  This Library General Public License is intended
-to permit developers of non-free programs to use free libraries, while
-preserving your freedom as a user of such programs to change the free
-libraries that are incorporated in them.  (We have not seen how to
-achieve this as regards changes in header files, but we have achieved
-it as regards changes in the actual functions of the Library.)  The
-hope is that this will lead to faster development of free libraries.
-
-   The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, while the latter only
-works together with the library.
-
-   Note that it is possible for a library to be covered by the ordinary
-General Public License rather than by this special one.
-
-    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library which
-     contains a notice placed by the copyright holder or other
-     authorized party saying it may be distributed under the terms of
-     this Library General Public License (also called "this License").
-     Each licensee is addressed as "you".
-
-     A "library" means a collection of software functions and/or data
-     prepared so as to be conveniently linked with application programs
-     (which use some of those functions and data) to form executables.
-
-     The "Library", below, refers to any such software library or work
-     which has been distributed under these terms.  A "work based on the
-     Library" means either the Library or any derivative work under
-     copyright law: that is to say, a work containing the Library or a
-     portion of it, either verbatim or with modifications and/or
-     translated straightforwardly into another language.  (Hereinafter,
-     translation is included without limitation in the term
-     "modification".)
-
-     "Source code" for a work means the preferred form of the work for
-     making modifications to it.  For a library, complete source code
-     means all the source code for all modules it contains, plus any
-     associated interface definition files, plus the scripts used to
-     control compilation and installation of the library.
-
-     Activities other than copying, distribution and modification are
-     not covered by this License; they are outside its scope.  The act
-     of running a program using the Library is not restricted, and
-     output from such a program is covered only if its contents
-     constitute a work based on the Library (independent of the use of
-     the Library in a tool for writing it).  Whether that is true
-     depends on what the Library does and what the program that uses
-     the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-     complete source code as you receive it, in any medium, provided
-     that you conspicuously and appropriately publish on each copy an
-     appropriate copyright notice and disclaimer of warranty; keep
-     intact all the notices that refer to this License and to the
-     absence of any warranty; and distribute a copy of this License
-     along with the Library.
-
-     You may charge a fee for the physical act of transferring a copy,
-     and you may at your option offer warranty protection in exchange
-     for a fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-     of it, thus forming a work based on the Library, and copy and
-     distribute such modifications or work under the terms of Section 1
-     above, provided that you also meet all of these conditions:
-
-       a. The modified work must itself be a software library.
-
-       b. You must cause the files modified to carry prominent notices
-          stating that you changed the files and the date of any change.
-
-       c. You must cause the whole of the work to be licensed at no
-          charge to all third parties under the terms of this License.
-
-       d. If a facility in the modified Library refers to a function or
-          a table of data to be supplied by an application program that
-          uses the facility, other than as an argument passed when the
-          facility is invoked, then you must make a good faith effort
-          to ensure that, in the event an application does not supply
-          such function or table, the facility still operates, and
-          performs whatever part of its purpose remains meaningful.
-
-          (For example, a function in a library to compute square roots
-          has a purpose that is entirely well-defined independent of the
-          application.  Therefore, Subsection 2d requires that any
-          application-supplied function or table used by this function
-          must be optional: if the application does not supply it, the
-          square root function must still compute square roots.)
-
-     These requirements apply to the modified work as a whole.  If
-     identifiable sections of that work are not derived from the
-     Library, and can be reasonably considered independent and separate
-     works in themselves, then this License, and its terms, do not
-     apply to those sections when you distribute them as separate
-     works.  But when you distribute the same sections as part of a
-     whole which is a work based on the Library, the distribution of
-     the whole must be on the terms of this License, whose permissions
-     for other licensees extend to the entire whole, and thus to each
-     and every part regardless of who wrote it.
-
-     Thus, it is not the intent of this section to claim rights or
-     contest your rights to work written entirely by you; rather, the
-     intent is to exercise the right to control the distribution of
-     derivative or collective works based on the Library.
-
-     In addition, mere aggregation of another work not based on the
-     Library with the Library (or with a work based on the Library) on
-     a volume of a storage or distribution medium does not bring the
-     other work under the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-     License instead of this License to a given copy of the Library.
-     To do this, you must alter all the notices that refer to this
-     License, so that they refer to the ordinary GNU General Public
-     License, version 2, instead of to this License.  (If a newer
-     version than version 2 of the ordinary GNU General Public License
-     has appeared, then you can specify that version instead if you
-     wish.)  Do not make any other change in these notices.
-
-     Once this change is made in a given copy, it is irreversible for
-     that copy, so the ordinary GNU General Public License applies to
-     all subsequent copies and derivative works made from that copy.
-
-     This option is useful when you wish to copy part of the code of
-     the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-     derivative of it, under Section 2) in object code or executable
-     form under the terms of Sections 1 and 2 above provided that you
-     accompany it with the complete corresponding machine-readable
-     source code, which must be distributed under the terms of Sections
-     1 and 2 above on a medium customarily used for software
-     interchange.
-
-     If distribution of object code is made by offering access to copy
-     from a designated place, then offering equivalent access to copy
-     the source code from the same place satisfies the requirement to
-     distribute the source code, even though third parties are not
-     compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-     Library, but is designed to work with the Library by being
-     compiled or linked with it, is called a "work that uses the
-     Library".  Such a work, in isolation, is not a derivative work of
-     the Library, and therefore falls outside the scope of this License.
-
-     However, linking a "work that uses the Library" with the Library
-     creates an executable that is a derivative of the Library (because
-     it contains portions of the Library), rather than a "work that
-     uses the library".  The executable is therefore covered by this
-     License.  Section 6 states terms for distribution of such
-     executables.
-
-     When a "work that uses the Library" uses material from a header
-     file that is part of the Library, the object code for the work may
-     be a derivative work of the Library even though the source code is
-     not.  Whether this is true is especially significant if the work
-     can be linked without the Library, or if the work is itself a
-     library.  The threshold for this to be true is not precisely
-     defined by law.
-
-     If such an object file uses only numerical parameters, data
-     structure layouts and accessors, and small macros and small inline
-     functions (ten lines or less in length), then the use of the object
-     file is unrestricted, regardless of whether it is legally a
-     derivative work.  (Executables containing this object code plus
-     portions of the Library will still fall under Section 6.)
-
-     Otherwise, if the work is a derivative of the Library, you may
-     distribute the object code for the work under the terms of Section
-     6.  Any executables containing that work also fall under Section 6,
-     whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also compile or
-     link a "work that uses the Library" with the Library to produce a
-     work containing portions of the Library, and distribute that work
-     under terms of your choice, provided that the terms permit
-     modification of the work for the customer's own use and reverse
-     engineering for debugging such modifications.
-
-     You must give prominent notice with each copy of the work that the
-     Library is used in it and that the Library and its use are covered
-     by this License.  You must supply a copy of this License.  If the
-     work during execution displays copyright notices, you must include
-     the copyright notice for the Library among them, as well as a
-     reference directing the user to the copy of this License.  Also,
-     you must do one of these things:
-
-       a. Accompany the work with the complete corresponding
-          machine-readable source code for the Library including
-          whatever changes were used in the work (which must be
-          distributed under Sections 1 and 2 above); and, if the work
-          is an executable linked with the Library, with the complete
-          machine-readable "work that uses the Library", as object code
-          and/or source code, so that the user can modify the Library
-          and then relink to produce a modified executable containing
-          the modified Library.  (It is understood that the user who
-          changes the contents of definitions files in the Library will
-          not necessarily be able to recompile the application to use
-          the modified definitions.)
-
-       b. Accompany the work with a written offer, valid for at least
-          three years, to give the same user the materials specified in
-          Subsection 6a, above, for a charge no more than the cost of
-          performing this distribution.
-
-       c. If distribution of the work is made by offering access to copy
-          from a designated place, offer equivalent access to copy the
-          above specified materials from the same place.
-
-       d. Verify that the user has already received a copy of these
-          materials or that you have already sent this user a copy.
-
-     For an executable, the required form of the "work that uses the
-     Library" must include any data and utility programs needed for
-     reproducing the executable from it.  However, as a special
-     exception, the source code distributed need not include anything
-     that is normally distributed (in either source or binary form)
-     with the major components (compiler, kernel, and so on) of the
-     operating system on which the executable runs, unless that
-     component itself accompanies the executable.
-
-     It may happen that this requirement contradicts the license
-     restrictions of other proprietary libraries that do not normally
-     accompany the operating system.  Such a contradiction means you
-     cannot use both them and the Library together in an executable
-     that you distribute.
-
-  7. You may place library facilities that are a work based on the
-     Library side-by-side in a single library together with other
-     library facilities not covered by this License, and distribute
-     such a combined library, provided that the separate distribution
-     of the work based on the Library and of the other library
-     facilities is otherwise permitted, and provided that you do these
-     two things:
-
-       a. Accompany the combined library with a copy of the same work
-          based on the Library, uncombined with any other library
-          facilities.  This must be distributed under the terms of the
-          Sections above.
-
-       b. Give prominent notice with the combined library of the fact
-          that part of it is a work based on the Library, and explaining
-          where to find the accompanying uncombined form of the same
-          work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute the
-     Library except as expressly provided under this License.  Any
-     attempt otherwise to copy, modify, sublicense, link with, or
-     distribute the Library is void, and will automatically terminate
-     your rights under this License.  However, parties who have
-     received copies, or rights, from you under this License will not
-     have their licenses terminated so long as such parties remain in
-     full compliance.
-
-  9. You are not required to accept this License, since you have not
-     signed it.  However, nothing else grants you permission to modify
-     or distribute the Library or its derivative works.  These actions
-     are prohibited by law if you do not accept this License.
-     Therefore, by modifying or distributing the Library (or any work
-     based on the Library), you indicate your acceptance of this
-     License to do so, and all its terms and conditions for copying,
-     distributing or modifying the Library or works based on it.
-
- 10. Each time you redistribute the Library (or any work based on the
-     Library), the recipient automatically receives a license from the
-     original licensor to copy, distribute, link with or modify the
-     Library subject to these terms and conditions.  You may not impose
-     any further restrictions on the recipients' exercise of the rights
-     granted herein.  You are not responsible for enforcing compliance
-     by third parties to this License.
-
- 11. If, as a consequence of a court judgment or allegation of patent
-     infringement or for any other reason (not limited to patent
-     issues), conditions are imposed on you (whether by court order,
-     agreement or otherwise) that contradict the conditions of this
-     License, they do not excuse you from the conditions of this
-     License.  If you cannot distribute so as to satisfy simultaneously
-     your obligations under this License and any other pertinent
-     obligations, then as a consequence you may not distribute the
-     Library at all.  For example, if a patent license would not permit
-     royalty-free redistribution of the Library by all those who
-     receive copies directly or indirectly through you, then the only
-     way you could satisfy both it and this License would be to refrain
-     entirely from distribution of the Library.
-
-     If any portion of this section is held invalid or unenforceable
-     under any particular circumstance, the balance of the section is
-     intended to apply, and the section as a whole is intended to apply
-     in other circumstances.
-
-     It is not the purpose of this section to induce you to infringe any
-     patents or other property right claims or to contest validity of
-     any such claims; this section has the sole purpose of protecting
-     the integrity of the free software distribution system which is
-     implemented by public license practices.  Many people have made
-     generous contributions to the wide range of software distributed
-     through that system in reliance on consistent application of that
-     system; it is up to the author/donor to decide if he or she is
-     willing to distribute software through any other system and a
-     licensee cannot impose that choice.
-
-     This section is intended to make thoroughly clear what is believed
-     to be a consequence of the rest of this License.
-
- 12. If the distribution and/or use of the Library is restricted in
-     certain countries either by patents or by copyrighted interfaces,
-     the original copyright holder who places the Library under this
-     License may add an explicit geographical distribution limitation
-     excluding those countries, so that distribution is permitted only
-     in or among countries not thus excluded.  In such case, this
-     License incorporates the limitation as if written in the body of
-     this License.
-
- 13. The Free Software Foundation may publish revised and/or new
-     versions of the Library General Public License from time to time.
-     Such new versions will be similar in spirit to the present version,
-     but may differ in detail to address new problems or concerns.
-
-     Each version is given a distinguishing version number.  If the
-     Library specifies a version number of this License which applies
-     to it and "any later version", you have the option of following
-     the terms and conditions either of that version or of any later
-     version published by the Free Software Foundation.  If the Library
-     does not specify a license version number, you may choose any
-     version ever published by the Free Software Foundation.
-
- 14. If you wish to incorporate parts of the Library into other free
-     programs whose distribution conditions are incompatible with these,
-     write to the author to ask for permission.  For software which is
-     copyrighted by the Free Software Foundation, write to the Free
-     Software Foundation; we sometimes make exceptions for this.  Our
-     decision will be guided by the two goals of preserving the free
-     status of all derivatives of our free software and of promoting
-     the sharing and reuse of software generally.
-
-                                NO WARRANTY
-
- 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-     WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
-     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-     HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT
-     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
-     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
-     QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU.  SHOULD THE
-     LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
-     SERVICING, REPAIR OR CORRECTION.
-
- 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
-     MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
-     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
-     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
-     INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
-     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
-     OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY
-     OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
-     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
-                      END OF TERMS AND CONDITIONS
-
-How to Apply These Terms to Your New Libraries
-==============================================
-
-   If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of
-the ordinary General Public License).
-
-   To apply these terms, attach the following notices to the library.
-It is safest to attach them to the start of each source file to most
-effectively convey the exclusion of warranty; and each file should have
-at least the "copyright" line and a pointer to where the full notice is
-found.
-
-     ONE LINE TO GIVE THE LIBRARY'S NAME AND AN IDEA OF WHAT IT DOES.
-     Copyright (C) YEAR  NAME OF AUTHOR
-     
-     This library is free software; you can redistribute it and/or modify it
-     under the terms of the GNU Library General Public License as published
-     by the Free Software Foundation; either version 2 of the License, or (at
-     your option) any later version.
-     
-     This library is distributed in the hope that it will be useful, but
-     WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-     Library General Public License for more details.
-     
-     You should have received a copy of the GNU General Public License along
-     with this program; if not, write to the Free Software Foundation, Inc.,
-     59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-
-   Also add information on how to contact you by electronic and paper
-mail.
-
-   You should also get your employer (if you work as a programmer) or
-your school, if any, to sign a "copyright disclaimer" for the library,
-if necessary.  Here is a sample; alter the names:
-
-     Yoyodyne, Inc., hereby disclaims all copyright interest in the library
-     `Frob' (a library for tweaking knobs) written by James Random Hacker.
-     
-     SIGNATURE OF TY COON, 1 April 1990
-     Ty Coon, President of Vice
-
-   That's all there is to it!
-
diff --git a/newlib/libc/sys/linux/linuxthreads/Makefile.am b/newlib/libc/sys/linux/linuxthreads/Makefile.am
deleted file mode 100644
index a47cecc17..000000000
--- a/newlib/libc/sys/linux/linuxthreads/Makefile.am
+++ /dev/null
@@ -1,139 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include -I$(srcdir)/machine/$(machine_dir) -I$(srcdir)/machine/generic  $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -I$(srcdir)/..
-
-LIBTOOL_VERSION_INFO = 0:0:0
-
-LIB_SOURCES= \
-	attr.c barrier.c condvar.c \
-	events.c getcpuclockid.c getreent.c join.c lockfile.c manager.c \
-	mq_notify.c oldsemaphore.c prio.c ptclock_gettime.c ptclock_settime.c \
-	ptlongjmp.c pt-machine.c reent.c rwlock.c semaphore.c \
-	signals.c spinlock.c sysctl.c \
-	timer_create.c timer_getoverr.c timer_routines.c \
-	timer_delete.c timer_gettime.c timer_settime.c \
-	wrapsyscall.c
-
-LIB_DB_SOURCES = td_init.c td_log.c td_ta_delete.c td_ta_get_nthreads.c      \
-	td_ta_get_ph.c td_ta_map_id2thr.c td_ta_map_lwp2thr.c     \
-	td_ta_new.c td_ta_thr_iter.c td_ta_tsd_iter.c		  \
-	td_thr_get_info.c td_thr_getfpregs.c td_thr_getgregs.c    \
-	td_thr_getxregs.c td_thr_getxregsize.c td_thr_setfpregs.c \
-	td_thr_setgregs.c td_thr_setprio.c td_thr_setsigpending.c \
-	td_thr_setxregs.c td_thr_sigsetmask.c td_thr_tsd.c	  \
-	td_thr_validate.c td_thr_dbsuspend.c td_thr_dbresume.c    \
-	td_ta_setconcurrency.c td_ta_enable_stats.c       	  \
-	td_ta_reset_stats.c td_ta_get_stats.c td_ta_event_addr.c  \
-	td_thr_event_enable.c td_thr_set_event.c 	          \
-	td_thr_clear_event.c td_thr_event_getmsg.c		  \
-	td_ta_set_event.c td_ta_event_getmsg.c		          \
-	td_ta_clear_event.c td_symbol_list.c
-
-# Because of how libtool moves objects around, these files must be built last.
-LIBADD_OBJS = mutex.$(oext) specific.$(oext) pthread.$(oext) \
-	cancel.$(oext) 
-
-ELIX_3_OBJS = \
-	ptfork.$(oext)
-
-if ELIX_LEVEL_1
-EXTRA_OBJS = reqsyscalls.$(oext)
-else
-if ELIX_LEVEL_2
-EXTRA_OBJS = reqsyscalls.$(oext)
-else
-EXTRA_OBJS = $(ELIX_3_OBJS)
-endif
-endif
-
-SUBDIRS = machine .
-
-tooldir = $(tooldir)
-toollibdir = $(top_toollibdir)
-
-libpthread_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/../shared.ld `cat extra-libtool-objlist`
-libthread_db_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/../shared.ld 
-
-if USE_LIBTOOL
-
-# objects listed later in LIBPTHREAD_OBJLISTS will override those listed earlier
-extra-libtool-objlist: $(MACHINE_OBJLIST)
-	cat $(MACHINE_OBJLIST) | $(AWK) '{ libpthread[$$1] = $$2 }; END { for (x in libpthread) printf ("%s\n", libpthread[x]) }' > $@
-
-toollib_LTLIBRARIES = libpthread.la libthread_db.la
-libpthread_la_SOURCES = $(LIB_SOURCES)
-libpthread_la_LIBADD = $(LIBADD_OBJS) $(EXTRA_OBJS)
-## libpthread_la_DEPENDENCIES = defs.h crti.S
-libpthread_la_DEPENDENCIES = $(LIBADD_OBJS) $(EXTRA_OBJS) extra-libtool-objlist
-noinst_DATA=objectlist.awk.in
-LIB_COMPILE = $(LTCOMPILE)
-
-libthread_db_la_SOURCES = $(LIB_DB_SOURCES)
-
-else
-
-toollib_LIBRARIES = libpthread.a libthread_db.a
-libpthread_a_SOURCES = $(LIB_SOURCES)
-libpthread_a_LIBADD = $(LIBADD_OBJS) $(EXTRA_OBJS) $(MACHINE_LIB)
-## libpthread_a_DEPENDENCIES = defs.h crti.S
-libpthread_a_DEPENDENCIES = $(LIBADD_OBJS) $(EXTRA_OBJS) $(MACHINE_LIB)
-LIB_COMPILE = $(COMPILE)
-
-libthread_db_a_SOURCES = $(LIB_DB_SOURCES)
-
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
-
-doc:
-
-install-data-local: install-toollibLIBRARIES
-	-rm -f $(DESTDIR)$(toollibdir)/libthread_db.so.1
-	ln -s $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 || cp $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 
-
-AM_CFLAGS = -D_XOPEN_SOURCE=600 -D_GNU_SOURCE=1
-ACLOCAL_AMFLAGS = -I ../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-## PTHREAD_HEADERS=pthread.h semaphore.h
-
-CFLAGS_pt_initfini = -g0 -fPIC -fno-inline-functions
-CFLAGS_noweak=-D__NO_WEAK_PTHREAD_ALIASES
-CFLAGS_cancel=-D__NO_WEAK_PTHREAD_ALIASES -D_RPC_THREAD_SAFE_
-CFLAGS_pthread=-D__NO_WEAK_PTHREAD_ALIASES -DHAVE_Z_NODELETE
-
-pt-initfini.s: $(srcdir)/pt-initfini.c
-	$(CC) -S $(CFLAGS_pt_initfini) -finhibit-size-directive \
-		$(patsubst -f%,-fno-%,$(exceptions)) -o $@
-
-# We only have one kind of startup code files.  Static binaries and
-# shared libraries are build using the PIC version.
-crti.S: pt-initfini.s
-	sed -n -e '1,/@HEADER_ENDS/p' \
-	       -e '/@_.*_PROLOG_BEGINS/,/@_.*_PROLOG_ENDS/p' \
-	       -e '/@TRAILER_BEGINS/,$$p' $< > $@
-
-defs.h: pt-initfini.s
-	sed -n -e '/@TESTS_BEGIN/,/@TESTS_END/p' $< | \
-		$(AWK) -f defs.awk > $@
-
-crti.o: crti.S defs.h
-	$(CC) -g0 $(ASFLAGS) -o $@
-
-mutex.$(oext): $(srcdir)/mutex.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-specific.$(oext): $(srcdir)/specific.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-pthread.$(oext): $(srcdir)/pthread.c
-	$(LIB_COMPILE) $(CFLAGS_pthread) -c $< -o $@
-
-ptfork.$(oext): $(srcdir)/ptfork.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-cancel.$(oext): $(srcdir)/cancel.c
-	$(LIB_COMPILE) $(CFLAGS_cancel) -c $< -o $@
-
diff --git a/newlib/libc/sys/linux/linuxthreads/Makefile.in b/newlib/libc/sys/linux/linuxthreads/Makefile.in
deleted file mode 100644
index 6ab7ced4c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/Makefile.in
+++ /dev/null
@@ -1,705 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MACHINE_LIB = @MACHINE_LIB@
-MACHINE_OBJLIST = @MACHINE_OBJLIST@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include -I$(srcdir)/machine/$(machine_dir) -I$(srcdir)/machine/generic  $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -I$(srcdir)/..
-
-LIBTOOL_VERSION_INFO = 0:0:0
-
-LIB_SOURCES = \
-	attr.c barrier.c condvar.c \
-	events.c getcpuclockid.c getreent.c join.c lockfile.c manager.c \
-	mq_notify.c oldsemaphore.c prio.c ptclock_gettime.c ptclock_settime.c \
-	ptlongjmp.c pt-machine.c reent.c rwlock.c semaphore.c \
-	signals.c spinlock.c sysctl.c \
-	timer_create.c timer_getoverr.c timer_routines.c \
-	timer_delete.c timer_gettime.c timer_settime.c \
-	wrapsyscall.c
-
-
-LIB_DB_SOURCES = td_init.c td_log.c td_ta_delete.c td_ta_get_nthreads.c      \
-	td_ta_get_ph.c td_ta_map_id2thr.c td_ta_map_lwp2thr.c     \
-	td_ta_new.c td_ta_thr_iter.c td_ta_tsd_iter.c		  \
-	td_thr_get_info.c td_thr_getfpregs.c td_thr_getgregs.c    \
-	td_thr_getxregs.c td_thr_getxregsize.c td_thr_setfpregs.c \
-	td_thr_setgregs.c td_thr_setprio.c td_thr_setsigpending.c \
-	td_thr_setxregs.c td_thr_sigsetmask.c td_thr_tsd.c	  \
-	td_thr_validate.c td_thr_dbsuspend.c td_thr_dbresume.c    \
-	td_ta_setconcurrency.c td_ta_enable_stats.c       	  \
-	td_ta_reset_stats.c td_ta_get_stats.c td_ta_event_addr.c  \
-	td_thr_event_enable.c td_thr_set_event.c 	          \
-	td_thr_clear_event.c td_thr_event_getmsg.c		  \
-	td_ta_set_event.c td_ta_event_getmsg.c		          \
-	td_ta_clear_event.c td_symbol_list.c
-
-
-# Because of how libtool moves objects around, these files must be built last.
-LIBADD_OBJS = mutex.$(oext) specific.$(oext) pthread.$(oext) \
-	cancel.$(oext) 
-
-
-ELIX_3_OBJS = \
-	ptfork.$(oext)
-
-@ELIX_LEVEL_1_TRUE@EXTRA_OBJS = @ELIX_LEVEL_1_TRUE@reqsyscalls.$(oext)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@EXTRA_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@reqsyscalls.$(oext)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@EXTRA_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@$(ELIX_3_OBJS)
-
-SUBDIRS = machine .
-
-tooldir = $(tooldir)
-toollibdir = $(top_toollibdir)
-
-libpthread_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/../shared.ld `cat extra-libtool-objlist`
-libthread_db_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/../shared.ld 
-
-@USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = @USE_LIBTOOL_TRUE@libpthread.la libthread_db.la
-@USE_LIBTOOL_TRUE@libpthread_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@libpthread_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIBADD_OBJS) $(EXTRA_OBJS)
-@USE_LIBTOOL_TRUE@libpthread_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIBADD_OBJS) $(EXTRA_OBJS) extra-libtool-objlist
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_TRUE@LIB_COMPILE = @USE_LIBTOOL_TRUE@$(LTCOMPILE)
-@USE_LIBTOOL_FALSE@LIB_COMPILE = @USE_LIBTOOL_FALSE@$(COMPILE)
-
-@USE_LIBTOOL_TRUE@libthread_db_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_DB_SOURCES)
-
-@USE_LIBTOOL_FALSE@toollib_LIBRARIES = @USE_LIBTOOL_FALSE@libpthread.a libthread_db.a
-@USE_LIBTOOL_FALSE@libpthread_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-@USE_LIBTOOL_FALSE@libpthread_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(EXTRA_OBJS) $(MACHINE_LIB)
-@USE_LIBTOOL_FALSE@libpthread_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIBADD_OBJS) $(EXTRA_OBJS) $(MACHINE_LIB)
-
-@USE_LIBTOOL_FALSE@libthread_db_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_DB_SOURCES)
-
-AM_CFLAGS = -D_XOPEN_SOURCE=600 -D_GNU_SOURCE=1
-ACLOCAL_AMFLAGS = -I ../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-
-CFLAGS_pt_initfini = -g0 -fPIC -fno-inline-functions
-CFLAGS_noweak = -D__NO_WEAK_PTHREAD_ALIASES
-CFLAGS_cancel = -D__NO_WEAK_PTHREAD_ALIASES -D_RPC_THREAD_SAFE_
-CFLAGS_pthread = -D__NO_WEAK_PTHREAD_ALIASES -DHAVE_Z_NODELETE
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(toollib_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@libpthread_a_OBJECTS =  attr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@barrier.$(OBJEXT) condvar.$(OBJEXT) events.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getcpuclockid.$(OBJEXT) getreent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@join.$(OBJEXT) lockfile.$(OBJEXT) manager.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mq_notify.$(OBJEXT) oldsemaphore.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@prio.$(OBJEXT) ptclock_gettime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ptclock_settime.$(OBJEXT) ptlongjmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@pt-machine.$(OBJEXT) reent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@rwlock.$(OBJEXT) semaphore.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@signals.$(OBJEXT) spinlock.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysctl.$(OBJEXT) timer_create.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@timer_getoverr.$(OBJEXT) timer_routines.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@timer_delete.$(OBJEXT) timer_gettime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@timer_settime.$(OBJEXT) wrapsyscall.$(OBJEXT)
-libthread_db_a_LIBADD = 
-@USE_LIBTOOL_FALSE@libthread_db_a_OBJECTS =  td_init.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_log.$(OBJEXT) td_ta_delete.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_get_nthreads.$(OBJEXT) td_ta_get_ph.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_map_id2thr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_map_lwp2thr.$(OBJEXT) td_ta_new.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_thr_iter.$(OBJEXT) td_ta_tsd_iter.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_get_info.$(OBJEXT) td_thr_getfpregs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_getgregs.$(OBJEXT) td_thr_getxregs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_getxregsize.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_setfpregs.$(OBJEXT) td_thr_setgregs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_setprio.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_setsigpending.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_setxregs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_sigsetmask.$(OBJEXT) td_thr_tsd.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_validate.$(OBJEXT) td_thr_dbsuspend.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_dbresume.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_setconcurrency.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_enable_stats.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_reset_stats.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_get_stats.$(OBJEXT) td_ta_event_addr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_event_enable.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_set_event.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_clear_event.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_thr_event_getmsg.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_set_event.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_event_getmsg.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@td_ta_clear_event.$(OBJEXT) td_symbol_list.$(OBJEXT)
-LTLIBRARIES =  $(toollib_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libpthread_la_OBJECTS =  attr.lo barrier.lo condvar.lo \
-@USE_LIBTOOL_TRUE@events.lo getcpuclockid.lo getreent.lo join.lo \
-@USE_LIBTOOL_TRUE@lockfile.lo manager.lo mq_notify.lo oldsemaphore.lo \
-@USE_LIBTOOL_TRUE@prio.lo ptclock_gettime.lo ptclock_settime.lo \
-@USE_LIBTOOL_TRUE@ptlongjmp.lo pt-machine.lo reent.lo rwlock.lo \
-@USE_LIBTOOL_TRUE@semaphore.lo signals.lo spinlock.lo sysctl.lo \
-@USE_LIBTOOL_TRUE@timer_create.lo timer_getoverr.lo timer_routines.lo \
-@USE_LIBTOOL_TRUE@timer_delete.lo timer_gettime.lo timer_settime.lo \
-@USE_LIBTOOL_TRUE@wrapsyscall.lo
-libthread_db_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libthread_db_la_OBJECTS =  td_init.lo td_log.lo \
-@USE_LIBTOOL_TRUE@td_ta_delete.lo td_ta_get_nthreads.lo td_ta_get_ph.lo \
-@USE_LIBTOOL_TRUE@td_ta_map_id2thr.lo td_ta_map_lwp2thr.lo td_ta_new.lo \
-@USE_LIBTOOL_TRUE@td_ta_thr_iter.lo td_ta_tsd_iter.lo \
-@USE_LIBTOOL_TRUE@td_thr_get_info.lo td_thr_getfpregs.lo \
-@USE_LIBTOOL_TRUE@td_thr_getgregs.lo td_thr_getxregs.lo \
-@USE_LIBTOOL_TRUE@td_thr_getxregsize.lo td_thr_setfpregs.lo \
-@USE_LIBTOOL_TRUE@td_thr_setgregs.lo td_thr_setprio.lo \
-@USE_LIBTOOL_TRUE@td_thr_setsigpending.lo td_thr_setxregs.lo \
-@USE_LIBTOOL_TRUE@td_thr_sigsetmask.lo td_thr_tsd.lo td_thr_validate.lo \
-@USE_LIBTOOL_TRUE@td_thr_dbsuspend.lo td_thr_dbresume.lo \
-@USE_LIBTOOL_TRUE@td_ta_setconcurrency.lo td_ta_enable_stats.lo \
-@USE_LIBTOOL_TRUE@td_ta_reset_stats.lo td_ta_get_stats.lo \
-@USE_LIBTOOL_TRUE@td_ta_event_addr.lo td_thr_event_enable.lo \
-@USE_LIBTOOL_TRUE@td_thr_set_event.lo td_thr_clear_event.lo \
-@USE_LIBTOOL_TRUE@td_thr_event_getmsg.lo td_ta_set_event.lo \
-@USE_LIBTOOL_TRUE@td_ta_event_getmsg.lo td_ta_clear_event.lo \
-@USE_LIBTOOL_TRUE@td_symbol_list.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(libpthread_a_SOURCES) $(libthread_db_a_SOURCES) $(libpthread_la_SOURCES) $(libthread_db_la_SOURCES)
-OBJECTS = $(libpthread_a_OBJECTS) $(libthread_db_a_OBJECTS) $(libpthread_la_OBJECTS) $(libthread_db_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../../acinclude.m4 ../../../../aclocal.m4 \
-		../../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-toollibLIBRARIES:
-
-clean-toollibLIBRARIES:
-	-test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES)
-
-distclean-toollibLIBRARIES:
-
-maintainer-clean-toollibLIBRARIES:
-
-install-toollibLIBRARIES: $(toollib_LIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
-	@list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(INSTALL_DATA) $$p $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-	@$(POST_INSTALL)
-	@list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(RANLIB) $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(RANLIB) $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-toollibLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(toollib_LIBRARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(toollibdir)/$$p; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-libpthread.a: $(libpthread_a_OBJECTS) $(libpthread_a_DEPENDENCIES)
-	-rm -f libpthread.a
-	$(AR) cru libpthread.a $(libpthread_a_OBJECTS) $(libpthread_a_LIBADD)
-	$(RANLIB) libpthread.a
-
-libthread_db.a: $(libthread_db_a_OBJECTS) $(libthread_db_a_DEPENDENCIES)
-	-rm -f libthread_db.a
-	$(AR) cru libthread_db.a $(libthread_db_a_OBJECTS) $(libthread_db_a_LIBADD)
-	$(RANLIB) libthread_db.a
-
-mostlyclean-toollibLTLIBRARIES:
-
-clean-toollibLTLIBRARIES:
-	-test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)
-
-distclean-toollibLTLIBRARIES:
-
-maintainer-clean-toollibLTLIBRARIES:
-
-install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
-	@list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-toollibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(toollibdir)/$$p; \
-	done
-
-libpthread.la: $(libpthread_la_OBJECTS) $(libpthread_la_DEPENDENCIES)
-	$(LINK) -rpath $(toollibdir) $(libpthread_la_LDFLAGS) $(libpthread_la_OBJECTS) $(libpthread_la_LIBADD) $(LIBS)
-
-libthread_db.la: $(libthread_db_la_OBJECTS) $(libthread_db_la_DEPENDENCIES)
-	$(LINK) -rpath $(toollibdir) $(libthread_db_la_LDFLAGS) $(libthread_db_la_OBJECTS) $(libthread_db_la_LIBADD) $(LIBS)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am: install-toollibLIBRARIES install-toollibLTLIBRARIES \
-		install-data-local
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-toollibLIBRARIES uninstall-toollibLTLIBRARIES
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(toollibdir) $(DESTDIR)$(toollibdir)
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-toollibLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-toollibLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-toollibLIBRARIES clean-compile clean-libtool \
-		clean-toollibLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-toollibLIBRARIES distclean-compile \
-		distclean-libtool distclean-toollibLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-toollibLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-toollibLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-toollibLIBRARIES distclean-toollibLIBRARIES \
-clean-toollibLIBRARIES maintainer-clean-toollibLIBRARIES \
-uninstall-toollibLIBRARIES install-toollibLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool mostlyclean-toollibLTLIBRARIES \
-distclean-toollibLTLIBRARIES clean-toollibLTLIBRARIES \
-maintainer-clean-toollibLTLIBRARIES uninstall-toollibLTLIBRARIES \
-install-toollibLTLIBRARIES install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-local \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
-
-
-# objects listed later in LIBPTHREAD_OBJLISTS will override those listed earlier
-@USE_LIBTOOL_TRUE@extra-libtool-objlist: $(MACHINE_OBJLIST)
-@USE_LIBTOOL_TRUE@	cat $(MACHINE_OBJLIST) | $(AWK) '{ libpthread[$$1] = $$2 }; END { for (x in libpthread) printf ("%s\n", libpthread[x]) }' > $@
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-doc:
-
-install-data-local: install-toollibLIBRARIES
-	-rm -f $(DESTDIR)$(toollibdir)/libthread_db.so.1
-	ln -s $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 || cp $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 
-
-pt-initfini.s: $(srcdir)/pt-initfini.c
-	$(CC) -S $(CFLAGS_pt_initfini) -finhibit-size-directive \
-		$(patsubst -f%,-fno-%,$(exceptions)) -o $@
-
-# We only have one kind of startup code files.  Static binaries and
-# shared libraries are build using the PIC version.
-crti.S: pt-initfini.s
-	sed -n -e '1,/@HEADER_ENDS/p' \
-	       -e '/@_.*_PROLOG_BEGINS/,/@_.*_PROLOG_ENDS/p' \
-	       -e '/@TRAILER_BEGINS/,$$p' $< > $@
-
-defs.h: pt-initfini.s
-	sed -n -e '/@TESTS_BEGIN/,/@TESTS_END/p' $< | \
-		$(AWK) -f defs.awk > $@
-
-crti.o: crti.S defs.h
-	$(CC) -g0 $(ASFLAGS) -o $@
-
-mutex.$(oext): $(srcdir)/mutex.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-specific.$(oext): $(srcdir)/specific.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-pthread.$(oext): $(srcdir)/pthread.c
-	$(LIB_COMPILE) $(CFLAGS_pthread) -c $< -o $@
-
-ptfork.$(oext): $(srcdir)/ptfork.c
-	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@
-
-cancel.$(oext): $(srcdir)/cancel.c
-	$(LIB_COMPILE) $(CFLAGS_cancel) -c $< -o $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/linuxthreads/aclocal.m4 b/newlib/libc/sys/linux/linuxthreads/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/linuxthreads/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/linuxthreads/attr.c b/newlib/libc/sys/linux/linuxthreads/attr.c
deleted file mode 100644
index 4b3a8f434..000000000
--- a/newlib/libc/sys/linux/linuxthreads/attr.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Handling of thread attributes */
-
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <sys/resource.h>
-#include "pthread.h"
-#include "internals.h"
-#include <shlib-compat.h>
-
-int __pthread_attr_init_2_1(pthread_attr_t *attr)
-{
-  size_t ps = __getpagesize ();
-
-  attr->__detachstate = PTHREAD_CREATE_JOINABLE;
-  attr->__schedpolicy = SCHED_OTHER;
-  attr->__schedparam.sched_priority = 0;
-  attr->__inheritsched = PTHREAD_EXPLICIT_SCHED;
-  attr->__scope = PTHREAD_SCOPE_SYSTEM;
-  attr->__guardsize = ps;
-  attr->__stackaddr = NULL;
-  attr->__stackaddr_set = 0;
-  attr->__stacksize = STACK_SIZE - ps;
-  return 0;
-}
-
-versioned_symbol (libpthread, __pthread_attr_init_2_1, pthread_attr_init,
-		  GLIBC_2_1);
-
-#if SHLIB_COMPAT(libpthread, GLIBC_2_0, GLIBC_2_1)
-int __pthread_attr_init_2_0(pthread_attr_t *attr)
-{
-  attr->__detachstate = PTHREAD_CREATE_JOINABLE;
-  attr->__schedpolicy = SCHED_OTHER;
-  attr->__schedparam.sched_priority = 0;
-  attr->__inheritsched = PTHREAD_EXPLICIT_SCHED;
-  attr->__scope = PTHREAD_SCOPE_SYSTEM;
-  return 0;
-}
-compat_symbol (libpthread, __pthread_attr_init_2_0, pthread_attr_init,
-	       GLIBC_2_0);
-#endif
-
-int pthread_attr_destroy(pthread_attr_t *attr)
-{
-  return 0;
-}
-
-int pthread_attr_setdetachstate(pthread_attr_t *attr, int detachstate)
-{
-  if (detachstate < PTHREAD_CREATE_JOINABLE ||
-      detachstate > PTHREAD_CREATE_DETACHED)
-    return EINVAL;
-  attr->__detachstate = detachstate;
-  return 0;
-}
-
-int pthread_attr_getdetachstate(const pthread_attr_t *attr, int *detachstate)
-{
-  *detachstate = attr->__detachstate;
-  return 0;
-}
-
-int pthread_attr_setschedparam(pthread_attr_t *attr,
-                               const struct sched_param *param)
-{
-  int max_prio = __sched_get_priority_max(attr->__schedpolicy);
-  int min_prio = __sched_get_priority_min(attr->__schedpolicy);
-
-  if (param->sched_priority < min_prio || param->sched_priority > max_prio)
-    return EINVAL;
-  memcpy (&attr->__schedparam, param, sizeof (struct sched_param));
-  return 0;
-}
-
-int pthread_attr_getschedparam(const pthread_attr_t *attr,
-                               struct sched_param *param)
-{
-  memcpy (param, &attr->__schedparam, sizeof (struct sched_param));
-  return 0;
-}
-
-int pthread_attr_setschedpolicy(pthread_attr_t *attr, int policy)
-{
-  if (policy != SCHED_OTHER && policy != SCHED_FIFO && policy != SCHED_RR)
-    return EINVAL;
-  attr->__schedpolicy = policy;
-  return 0;
-}
-
-int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int *policy)
-{
-  *policy = attr->__schedpolicy;
-  return 0;
-}
-
-int pthread_attr_setinheritsched(pthread_attr_t *attr, int inherit)
-{
-  if (inherit != PTHREAD_INHERIT_SCHED && inherit != PTHREAD_EXPLICIT_SCHED)
-    return EINVAL;
-  attr->__inheritsched = inherit;
-  return 0;
-}
-
-int pthread_attr_getinheritsched(const pthread_attr_t *attr, int *inherit)
-{
-  *inherit = attr->__inheritsched;
-  return 0;
-}
-
-int pthread_attr_setscope(pthread_attr_t *attr, int scope)
-{
-  switch (scope) {
-  case PTHREAD_SCOPE_SYSTEM:
-    attr->__scope = scope;
-    return 0;
-  case PTHREAD_SCOPE_PROCESS:
-    return ENOTSUP;
-  default:
-    return EINVAL;
-  }
-}
-
-int pthread_attr_getscope(const pthread_attr_t *attr, int *scope)
-{
-  *scope = attr->__scope;
-  return 0;
-}
-
-int __pthread_attr_setguardsize(pthread_attr_t *attr, size_t guardsize)
-{
-  /* The guard size must not be larger than the stack itself */
-  if (guardsize >= attr->__stacksize) return EINVAL;
-
-  attr->__guardsize = guardsize;
-
-  return 0;
-}
-weak_alias (__pthread_attr_setguardsize, pthread_attr_setguardsize)
-
-int __pthread_attr_getguardsize(const pthread_attr_t *attr, size_t *guardsize)
-{
-  *guardsize = attr->__guardsize;
-  return 0;
-}
-weak_alias (__pthread_attr_getguardsize, pthread_attr_getguardsize)
-
-int __pthread_attr_setstackaddr(pthread_attr_t *attr, void *stackaddr)
-{
-  attr->__stackaddr = stackaddr;
-  attr->__stackaddr_set = 1;
-  return 0;
-}
-weak_alias (__pthread_attr_setstackaddr, pthread_attr_setstackaddr)
-
-link_warning (pthread_attr_setstackaddr,
-	      "the use of `pthread_attr_setstackaddr' is deprecated, use `pthread_attr_setstack'")
-
-int __pthread_attr_getstackaddr(const pthread_attr_t *attr, void **stackaddr)
-{
-  /* XXX This function has a stupid definition.  The standard specifies
-     no error value but what is if no stack address was set?  We simply
-     return the value we have in the member.  */
-  *stackaddr = attr->__stackaddr;
-  return 0;
-}
-weak_alias (__pthread_attr_getstackaddr, pthread_attr_getstackaddr)
-
-link_warning (pthread_attr_getstackaddr,
-	      "the use of `pthread_attr_getstackaddr' is deprecated, use `pthread_attr_getstack'")
-
-
-int __pthread_attr_setstacksize(pthread_attr_t *attr, size_t stacksize)
-{
-#ifdef FLOATING_STACKS
-  /* We have to check against the maximum allowed stack size.  This is no
-     problem if the manager is already started and we determined it.  If
-     this hasn't happened, we have to find the limit outself.  */
-  if (__pthread_max_stacksize == 0)
-    __pthread_init_max_stacksize ();
-
-  if (stacksize > __pthread_max_stacksize)
-    return EINVAL;
-#else
-  /* We have a fixed size limit.  */
-  if (stacksize > STACK_SIZE)
-    return EINVAL;
-#endif
-
-  /* We don't accept value smaller than PTHREAD_STACK_MIN.  */
-  if (stacksize < PTHREAD_STACK_MIN)
-    return EINVAL;
-
-  attr->__stacksize = stacksize;
-  return 0;
-}
-weak_alias (__pthread_attr_setstacksize, pthread_attr_setstacksize)
-
-int __pthread_attr_getstacksize(const pthread_attr_t *attr, size_t *stacksize)
-{
-  *stacksize = attr->__stacksize;
-  return 0;
-}
-weak_alias (__pthread_attr_getstacksize, pthread_attr_getstacksize)
-
-int __pthread_attr_setstack (pthread_attr_t *attr, void *stackaddr,
-			     size_t stacksize)
-{
-  int err;
-
-  if ((((uintptr_t) stackaddr)
-       & (__alignof__ (struct _pthread_descr_struct) - 1)) != 0)
-    err = EINVAL;
-  else
-    err = __pthread_attr_setstacksize (attr, stacksize);
-  if (err == 0)
-    {
-#ifndef _STACK_GROWS_UP
-      attr->__stackaddr = (char *) stackaddr + stacksize;
-#else
-      attr->__stackaddr = stackaddr;
-#endif
-      attr->__stackaddr_set = 1;
-    }
-
-  return err;
-}
-weak_alias (__pthread_attr_setstack, pthread_attr_setstack)
-
-int __pthread_attr_getstack (const pthread_attr_t *attr, void **stackaddr,
-			     size_t *stacksize)
-{
-  /* XXX This function has a stupid definition.  The standard specifies
-     no error value but what is if no stack address was set?  We simply
-     return the value we have in the member.  */
-#ifndef _STACK_GROWS_UP
-  *stackaddr = (char *) attr->__stackaddr - attr->__stacksize;
-#else
-  *stackaddr = attr->__stackaddr;
-#endif
-  *stacksize = attr->__stacksize;
-  return 0;
-}
-weak_alias (__pthread_attr_getstack, pthread_attr_getstack)
-
-int pthread_getattr_np (pthread_t thread, pthread_attr_t *attr)
-{
-  pthread_handle handle = thread_handle (thread);
-  pthread_descr descr;
-
-  if (handle == NULL)
-    return ENOENT;
-
-  descr = handle->h_descr;
-
-  attr->__detachstate = (descr->p_detached
-			 ? PTHREAD_CREATE_DETACHED
-			 : PTHREAD_CREATE_JOINABLE);
-
-  attr->__schedpolicy = __sched_getscheduler (descr->p_pid);
-  if (attr->__schedpolicy == -1)
-    return errno;
-
-  if (__sched_getparam (descr->p_pid,
-			(struct sched_param *) &attr->__schedparam) != 0)
-    return errno;
-
-  attr->__inheritsched = descr->p_inheritsched;
-  attr->__scope = PTHREAD_SCOPE_SYSTEM;
-#ifdef _STACK_GROWS_DOWN
-  attr->__stacksize = (char *)(descr + 1) - (char *)descr->p_guardaddr
-		      - descr->p_guardsize;
-#else
-  attr->__stacksize = (char *)descr->p_guardaddr - (char *)descr;
-#endif
-  attr->__guardsize = descr->p_guardsize;
-  attr->__stackaddr_set = descr->p_userstack;
-#ifdef NEED_SEPARATE_REGISTER_STACK
-  if (descr->p_userstack == 0)
-    attr->__stacksize *= 2;
-  /* XXX This is awkward.  The guard pages are in the middle of the
-     two stacks.  We must count the guard size in the stack size since
-     otherwise the range of the stack area cannot be computed.  */
-  attr->__stacksize += attr->__guardsize;
-#endif
-#ifndef _STACK_GROWS_UP
-  attr->__stackaddr = (char *)(descr + 1);
-#else
-  attr->__stackaddr = (char *)descr;
-#endif
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/barrier.c b/newlib/libc/sys/linux/linuxthreads/barrier.c
deleted file mode 100644
index 1293bad85..000000000
--- a/newlib/libc/sys/linux/linuxthreads/barrier.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* POSIX barrier implementation for LinuxThreads.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "queue.h"
-#include "restart.h"
-
-int
-pthread_barrier_wait(pthread_barrier_t *barrier)
-{
-  pthread_descr self = thread_self();
-  pthread_descr temp_wake_queue, th;
-  int result = 0;
-
-  __pthread_lock(&barrier->__ba_lock, self);
-
-  /* If the required number of threads have achieved rendezvous... */
-  if (barrier->__ba_present >= barrier->__ba_required - 1)
-    {
-      /* ... then this last caller shall be the serial thread */
-      result = PTHREAD_BARRIER_SERIAL_THREAD;
-      /* Copy and clear wait queue and reset barrier. */
-      temp_wake_queue = barrier->__ba_waiting;
-      barrier->__ba_waiting = NULL;
-      barrier->__ba_present = 0;
-    }
-  else
-    {
-      result = 0;
-      barrier->__ba_present++;
-      enqueue(&barrier->__ba_waiting, self);
-    }
-
-  __pthread_unlock(&barrier->__ba_lock);
-
-  if (result == 0)
-    {
-      /* Non-serial threads have to suspend */
-      suspend(self);
-      /* We don't bother dealing with cancellation because the POSIX
-         spec for barriers doesn't mention that pthread_barrier_wait
-         is a cancellation point. */
-    }
-  else
-    {
-      /* Serial thread wakes up all others. */
-      while ((th = dequeue(&temp_wake_queue)) != NULL)
-	restart(th);
-    }
-
-  return result;
-}
-
-int
-pthread_barrier_init(pthread_barrier_t *barrier,
-				const pthread_barrierattr_t *attr,
-				unsigned int count)
-{
-  if (count == 0)
-     return EINVAL;
-
-  __pthread_init_lock(&barrier->__ba_lock);
-  barrier->__ba_required = count;
-  barrier->__ba_present = 0;
-  barrier->__ba_waiting = NULL;
-  return 0;
-}
-
-int
-pthread_barrier_destroy(pthread_barrier_t *barrier)
-{
-  if (barrier->__ba_waiting != NULL) return EBUSY;
-  return 0;
-}
-
-int
-pthread_barrierattr_init(pthread_barrierattr_t *attr)
-{
-  attr->__pshared = PTHREAD_PROCESS_PRIVATE;
-  return 0;
-}
-
-int
-pthread_barrierattr_destroy(pthread_barrierattr_t *attr)
-{
-  return 0;
-}
-
-int
-__pthread_barrierattr_getpshared(const pthread_barrierattr_t *attr,
-				 int *pshared)
-{
-  *pshared = attr->__pshared;
-  return 0;
-}
-
-int
-pthread_barrierattr_setpshared(pthread_barrierattr_t *attr, int pshared)
-{
-  if (pshared != PTHREAD_PROCESS_PRIVATE && pshared != PTHREAD_PROCESS_SHARED)
-    return EINVAL;
-
-  attr->__pshared = pshared;
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/initspin.h b/newlib/libc/sys/linux/linuxthreads/bits/initspin.h
deleted file mode 100644
index af19d44e6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/initspin.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Generic definitions for spinlock initializers.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Initial value of a spinlock.  Most platforms should use zero,
-   unless they only implement a "test and clear" operation instead of
-   the usual "test and set". */
-#define __LT_SPINLOCK_INIT 0
-
-/* Macros for lock initializers, using the above definition. */
-#define __LOCK_INITIALIZER { 0, __LT_SPINLOCK_INIT }
-#define __ALT_LOCK_INITIALIZER { 0, __LT_SPINLOCK_INIT }
-#define __ATOMIC_INITIALIZER { 0, __LT_SPINLOCK_INIT }
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/libc-lock.h b/newlib/libc/sys/linux/linuxthreads/bits/libc-lock.h
deleted file mode 100644
index 2c1d16277..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/libc-lock.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/* libc-internal interface for mutex locks.  LinuxThreads version.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _BITS_LIBC_LOCK_H
-#define _BITS_LIBC_LOCK_H 1
-
-#include <pthread.h>
-
-/* Mutex type.  */
-#if defined(_LIBC) || defined(_IO_MTSAFE_IO)
-typedef pthread_mutex_t __libc_lock_t;
-typedef struct { pthread_mutex_t mutex; } __libc_lock_recursive_t;
-# ifdef __USE_UNIX98
-typedef pthread_rwlock_t __libc_rwlock_t;
-# else
-typedef struct __libc_rwlock_opaque__ __libc_rwlock_t;
-# endif
-#else
-typedef struct __libc_lock_opaque__ __libc_lock_t;
-typedef struct __libc_lock_recursive_opaque__ __libc_lock_recursive_t;
-typedef struct __libc_rwlock_opaque__ __libc_rwlock_t;
-#endif
-
-/* Type for key to thread-specific data.  */
-typedef pthread_key_t __libc_key_t;
-
-/* Define a lock variable NAME with storage class CLASS.  The lock must be
-   initialized with __libc_lock_init before it can be used (or define it
-   with __libc_lock_define_initialized, below).  Use `extern' for CLASS to
-   declare a lock defined in another module.  In public structure
-   definitions you must use a pointer to the lock structure (i.e., NAME
-   begins with a `*'), because its storage size will not be known outside
-   of libc.  */
-#define __libc_lock_define(CLASS,NAME) \
-  CLASS __libc_lock_t NAME;
-#define __libc_rwlock_define(CLASS,NAME) \
-  CLASS __libc_rwlock_t NAME;
-#define __libc_lock_define_recursive(CLASS,NAME) \
-  CLASS __libc_lock_recursive_t NAME;
-
-/* Define an initialized lock variable NAME with storage class CLASS.
-
-   For the C library we take a deeper look at the initializer.  For
-   this implementation all fields are initialized to zero.  Therefore
-   we don't initialize the variable which allows putting it into the
-   BSS section.  (Except on PA-RISC and other odd architectures, where
-   initialized locks must be set to one due to the lack of normal
-   atomic operations.) */
-
-#if __LT_SPINLOCK_INIT == 0
-#  define __libc_lock_define_initialized(CLASS,NAME) \
-  CLASS __libc_lock_t NAME;
-#else
-#  define __libc_lock_define_initialized(CLASS,NAME) \
-  CLASS __libc_lock_t NAME = PTHREAD_MUTEX_INITIALIZER;
-#endif
-
-#define __libc_rwlock_define_initialized(CLASS,NAME) \
-  CLASS __libc_rwlock_t NAME = PTHREAD_RWLOCK_INITIALIZER;
-
-/* Define an initialized recursive lock variable NAME with storage
-   class CLASS.  */
-#define __libc_lock_define_initialized_recursive(CLASS,NAME) \
-  CLASS __libc_lock_recursive_t NAME = _LIBC_LOCK_RECURSIVE_INITIALIZER;
-#define _LIBC_LOCK_RECURSIVE_INITIALIZER \
-  {PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP}
-
-/* Initialize the named lock variable, leaving it in a consistent, unlocked
-   state.  */
-#define __libc_lock_init(NAME) \
-  (__pthread_mutex_init != NULL ? __pthread_mutex_init (&(NAME), NULL) : 0);
-#define __libc_rwlock_init(NAME) \
-  (__pthread_rwlock_init != NULL ? __pthread_rwlock_init (&(NAME), NULL) : 0);
-
-/* Same as last but this time we initialize a recursive mutex.  */
-#define __libc_lock_init_recursive(NAME) \
-  do {									      \
-    if (__pthread_mutex_init != NULL)					      \
-      {									      \
-	pthread_mutexattr_t __attr;					      \
-	__pthread_mutexattr_init (&__attr);				      \
-	__pthread_mutexattr_settype (&__attr, PTHREAD_MUTEX_RECURSIVE_NP); \
-	__pthread_mutex_init (&(NAME).mutex, &__attr);			      \
-	__pthread_mutexattr_destroy (&__attr);				      \
-      }									      \
-  } while (0);
-
-/* Finalize the named lock variable, which must be locked.  It cannot be
-   used again until __libc_lock_init is called again on it.  This must be
-   called on a lock variable before the containing storage is reused.  */
-#define __libc_lock_fini(NAME) \
-  (__pthread_mutex_destroy != NULL ? __pthread_mutex_destroy (&(NAME)) : 0);
-#define __libc_rwlock_fini(NAME) \
-  (__pthread_rwlock_destroy != NULL ? __pthread_rwlock_destroy (&(NAME)) : 0);
-
-/* Finalize recursive named lock.  */
-#define __libc_lock_fini_recursive(NAME) __libc_lock_fini ((NAME).mutex)
-
-/* Lock the named lock variable.  */
-#define __libc_lock_lock(NAME) \
-  (__pthread_mutex_lock != NULL ? __pthread_mutex_lock (&(NAME)) : 0);
-#define __libc_rwlock_rdlock(NAME) \
-  (__pthread_rwlock_rdlock != NULL ? __pthread_rwlock_rdlock (&(NAME)) : 0);
-#define __libc_rwlock_wrlock(NAME) \
-  (__pthread_rwlock_wrlock != NULL ? __pthread_rwlock_wrlock (&(NAME)) : 0);
-
-/* Lock the recursive named lock variable.  */
-#define __libc_lock_lock_recursive(NAME) __libc_lock_lock ((NAME).mutex)
-
-/* Try to lock the named lock variable.  */
-#define __libc_lock_trylock(NAME) \
-  (__pthread_mutex_trylock != NULL ? __pthread_mutex_trylock (&(NAME)) : 0)
-#define __libc_rwlock_tryrdlock(NAME) \
-  (__pthread_rwlock_tryrdlock != NULL \
-   ? __pthread_rwlock_tryrdlock (&(NAME)) : 0)
-#define __libc_rwlock_trywrlock(NAME) \
-  (__pthread_rwlock_trywrlock != NULL \
-   ? __pthread_rwlock_trywrlock (&(NAME)) : 0)
-
-/* Try to lock the recursive named lock variable.  */
-#define __libc_lock_trylock_recursive(NAME) __libc_lock_trylock ((NAME).mutex)
-
-/* Unlock the named lock variable.  */
-#define __libc_lock_unlock(NAME) \
-  (__pthread_mutex_unlock != NULL ? __pthread_mutex_unlock (&(NAME)) : 0);
-#define __libc_rwlock_unlock(NAME) \
-  (__pthread_rwlock_unlock != NULL ? __pthread_rwlock_unlock (&(NAME)) : 0);
-
-/* Unlock the recursive named lock variable.  */
-#define __libc_lock_unlock_recursive(NAME) __libc_lock_unlock ((NAME).mutex)
-
-
-/* Define once control variable.  */
-#if PTHREAD_ONCE_INIT == 0
-/* Special case for static variables where we can avoid the initialization
-   if it is zero.  */
-# define __libc_once_define(CLASS, NAME) \
-  CLASS pthread_once_t NAME
-#else
-# define __libc_once_define(CLASS, NAME) \
-  CLASS pthread_once_t NAME = PTHREAD_ONCE_INIT
-#endif
-
-/* Call handler iff the first call.  */
-#define __libc_once(ONCE_CONTROL, INIT_FUNCTION) \
-  do {									      \
-    if (__pthread_once != NULL)						      \
-      __pthread_once (&(ONCE_CONTROL), (INIT_FUNCTION));		      \
-    else if ((ONCE_CONTROL) == PTHREAD_ONCE_INIT) {			      \
-      INIT_FUNCTION ();							      \
-      (ONCE_CONTROL) = !PTHREAD_ONCE_INIT;				      \
-    }									      \
-  } while (0)
-
-
-/* Start critical region with cleanup.  */
-#define __libc_cleanup_region_start(DOIT, FCT, ARG) \
-  { struct _pthread_cleanup_buffer _buffer;				      \
-    int _avail = (DOIT) && _pthread_cleanup_push_defer != NULL;		      \
-    if (_avail) {							      \
-      _pthread_cleanup_push_defer (&_buffer, (FCT), (ARG));		      \
-    }
-
-/* End critical region with cleanup.  */
-#define __libc_cleanup_region_end(DOIT) \
-    if (_avail) {							      \
-      _pthread_cleanup_pop_restore (&_buffer, (DOIT));			      \
-    }									      \
-  }
-
-/* Sometimes we have to exit the block in the middle.  */
-#define __libc_cleanup_end(DOIT) \
-    if (_avail) {							      \
-      _pthread_cleanup_pop_restore (&_buffer, (DOIT));			      \
-    }
-
-/* Create thread-specific key.  */
-#define __libc_key_create(KEY, DESTRUCTOR) \
-  (__pthread_key_create != NULL ? __pthread_key_create (KEY, DESTRUCTOR) : 1)
-
-/* Get thread-specific data.  */
-#define __libc_getspecific(KEY) \
-  (__pthread_getspecific != NULL ? __pthread_getspecific (KEY) : NULL)
-
-/* Set thread-specific data.  */
-#define __libc_setspecific(KEY, VALUE) \
-  (__pthread_setspecific != NULL ? __pthread_setspecific (KEY, VALUE) : 0)
-
-
-/* Register handlers to execute before and after `fork'.  */
-#define __libc_atfork(PREPARE, PARENT, CHILD) \
-  (__pthread_atfork != NULL ? __pthread_atfork (PREPARE, PARENT, CHILD) : 0)
-
-/* Functions that are used by this file and are internal to the GNU C
-   library.  */
-
-extern int __pthread_mutex_init (pthread_mutex_t *__mutex,
-				 __const pthread_mutexattr_t *__mutex_attr);
-
-extern int __pthread_mutex_destroy (pthread_mutex_t *__mutex);
-
-extern int __pthread_mutex_trylock (pthread_mutex_t *__mutex);
-
-extern int __pthread_mutex_lock (pthread_mutex_t *__mutex);
-
-extern int __pthread_mutex_unlock (pthread_mutex_t *__mutex);
-
-extern int __pthread_mutexattr_init (pthread_mutexattr_t *__attr);
-
-extern int __pthread_mutexattr_destroy (pthread_mutexattr_t *__attr);
-
-extern int __pthread_mutexattr_settype (pthread_mutexattr_t *__attr,
-					int __kind);
-
-#ifdef __USE_UNIX98
-extern int __pthread_rwlock_init (pthread_rwlock_t *__rwlock,
-				  __const pthread_rwlockattr_t *__attr);
-
-extern int __pthread_rwlock_destroy (pthread_rwlock_t *__rwlock);
-
-extern int __pthread_rwlock_rdlock (pthread_rwlock_t *__rwlock);
-
-extern int __pthread_rwlock_tryrdlock (pthread_rwlock_t *__rwlock);
-
-extern int __pthread_rwlock_wrlock (pthread_rwlock_t *__rwlock);
-
-extern int __pthread_rwlock_trywrlock (pthread_rwlock_t *__rwlock);
-
-extern int __pthread_rwlock_unlock (pthread_rwlock_t *__rwlock);
-#endif
-
-extern int __pthread_key_create (pthread_key_t *__key,
-				 void (*__destr_function) (void *));
-
-extern int __pthread_setspecific (pthread_key_t __key,
-				  __const void *__pointer);
-
-extern void *__pthread_getspecific (pthread_key_t __key);
-
-extern int __pthread_once (pthread_once_t *__once_control,
-			   void (*__init_routine) (void));
-
-extern int __pthread_atfork (void (*__prepare) (void),
-			     void (*__parent) (void),
-			     void (*__child) (void));
-
-
-
-/* Make the pthread functions weak so that we can elide them from
-   single-threaded processes.  */
-#ifndef __NO_WEAK_PTHREAD_ALIASES
-# ifdef weak_extern
-#  if _LIBC
-#   include <bp-sym.h>
-#  else
-#   define BP_SYM (sym) sym
-#  endif
-weak_extern (BP_SYM (__pthread_mutex_init))
-weak_extern (BP_SYM (__pthread_mutex_destroy))
-weak_extern (BP_SYM (__pthread_mutex_lock))
-weak_extern (BP_SYM (__pthread_mutex_trylock))
-weak_extern (BP_SYM (__pthread_mutex_unlock))
-weak_extern (BP_SYM (__pthread_mutexattr_init))
-weak_extern (BP_SYM (__pthread_mutexattr_destroy))
-weak_extern (BP_SYM (__pthread_mutexattr_settype))
-weak_extern (BP_SYM (__pthread_rwlock_init))
-weak_extern (BP_SYM (__pthread_rwlock_destroy))
-weak_extern (BP_SYM (__pthread_rwlock_rdlock))
-weak_extern (BP_SYM (__pthread_rwlock_tryrdlock))
-weak_extern (BP_SYM (__pthread_rwlock_wrlock))
-weak_extern (BP_SYM (__pthread_rwlock_trywrlock))
-weak_extern (BP_SYM (__pthread_rwlock_unlock))
-weak_extern (BP_SYM (__pthread_key_create))
-weak_extern (BP_SYM (__pthread_setspecific))
-weak_extern (BP_SYM (__pthread_getspecific))
-weak_extern (BP_SYM (__pthread_once))
-weak_extern (__pthread_initialize)
-weak_extern (__pthread_atfork)
-weak_extern (BP_SYM (_pthread_cleanup_push_defer))
-weak_extern (BP_SYM (_pthread_cleanup_pop_restore))
-# else
-#  pragma weak __pthread_mutex_init
-#  pragma weak __pthread_mutex_destroy
-#  pragma weak __pthread_mutex_lock
-#  pragma weak __pthread_mutex_trylock
-#  pragma weak __pthread_mutex_unlock
-#  pragma weak __pthread_mutexattr_init
-#  pragma weak __pthread_mutexattr_destroy
-#  pragma weak __pthread_mutexattr_settype
-#  pragma weak __pthread_rwlock_destroy
-#  pragma weak __pthread_rwlock_rdlock
-#  pragma weak __pthread_rwlock_tryrdlock
-#  pragma weak __pthread_rwlock_wrlock
-#  pragma weak __pthread_rwlock_trywrlock
-#  pragma weak __pthread_rwlock_unlock
-#  pragma weak __pthread_key_create
-#  pragma weak __pthread_setspecific
-#  pragma weak __pthread_getspecific
-#  pragma weak __pthread_once
-#  pragma weak __pthread_initialize
-#  pragma weak __pthread_atfork
-#  pragma weak _pthread_cleanup_push_defer
-#  pragma weak _pthread_cleanup_pop_restore
-# endif
-#endif
-
-/* We need portable names for some functions.  E.g., when they are
-   used as argument to __libc_cleanup_region_start.  */
-#define __libc_mutex_unlock __pthread_mutex_unlock
-
-#endif	/* bits/libc-lock.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/libc-tsd.h b/newlib/libc/sys/linux/linuxthreads/bits/libc-tsd.h
deleted file mode 100644
index 7a532ea74..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/libc-tsd.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* libc-internal interface for thread-specific data.  LinuxThreads version.
-   Copyright (C) 1997, 1998, 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _BITS_LIBC_TSD_H
-#define _BITS_LIBC_TSD_H 1
-
-
-/* Fast thread-specific data internal to libc.  */
-enum __libc_tsd_key_t { _LIBC_TSD_KEY_MALLOC = 0,
-			_LIBC_TSD_KEY_DL_ERROR,
-			_LIBC_TSD_KEY_RPC_VARS,
-			_LIBC_TSD_KEY_N };
-
-extern void *(*__libc_internal_tsd_get) (enum __libc_tsd_key_t) __THROW;
-extern int (*__libc_internal_tsd_set) (enum __libc_tsd_key_t,
-				       __const void *)  __THROW;
-
-#define __libc_tsd_define(CLASS, KEY)	CLASS void *__libc_tsd_##KEY##_data;
-#define __libc_tsd_get(KEY) \
-  (__libc_internal_tsd_get != NULL \
-   ? __libc_internal_tsd_get (_LIBC_TSD_KEY_##KEY) \
-   : __libc_tsd_##KEY##_data)
-#define __libc_tsd_set(KEY, VALUE) \
-  (__libc_internal_tsd_set != NULL \
-   ? __libc_internal_tsd_set (_LIBC_TSD_KEY_##KEY, (VALUE)) \
-   : ((__libc_tsd_##KEY##_data = (VALUE)), 0))
-
-#endif	/* bits/libc-tsd.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/local_lim.h b/newlib/libc/sys/linux/linuxthreads/bits/local_lim.h
deleted file mode 100644
index 0a7c83706..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/local_lim.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Minimum guaranteed maximum values for system limits.  Linux version.
-   Copyright (C) 1993, 94, 95, 96, 97, 98, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* The kernel header pollutes the namespace with the NR_OPEN symbol
-   and defines LINK_MAX although filesystems have different maxima.  A
-   similar thing is true for OPEN_MAX: the limit can be changed at
-   runtime and therefore the macro must not be defined.  Remove this
-   after including the header if necessary.  */
-#ifndef NR_OPEN
-# define __undef_NR_OPEN
-#endif
-#ifndef LINK_MAX
-# define __undef_LINK_MAX
-#endif
-#ifndef OPEN_MAX
-# define __undef_OPEN_MAX
-#endif
-
-/* The kernel sources contain a file with all the needed information.  */
-#include <linux/limits.h>
-
-/* Have to remove NR_OPEN?  */
-#ifdef __undef_NR_OPEN
-# undef NR_OPEN
-# undef __undef_NR_OPEN
-#endif
-/* Have to remove LINK_MAX?  */
-#ifdef __undef_LINK_MAX
-# undef LINK_MAX
-# undef __undef_LINK_MAX
-#endif
-/* Have to remove OPEN_MAX?  */
-#ifdef __undef_OPEN_MAX
-# undef OPEN_MAX
-# undef __undef_OPEN_MAX
-#endif
-
-/* The number of data keys per process.  */
-#define _POSIX_THREAD_KEYS_MAX	128
-/* This is the value this implementation supports.  */
-#define PTHREAD_KEYS_MAX	1024
-
-/* Controlling the iterations of destructors for thread-specific data.  */
-#define _POSIX_THREAD_DESTRUCTOR_ITERATIONS	4
-/* Number of iterations this implementation does.  */
-#define PTHREAD_DESTRUCTOR_ITERATIONS	_POSIX_THREAD_DESTRUCTOR_ITERATIONS
-
-/* The number of threads per process.  */
-#define _POSIX_THREAD_THREADS_MAX	64
-/* This is the value this implementation supports.  */
-#define PTHREAD_THREADS_MAX	1024
-
-/* Maximum amount by which a process can descrease its asynchronous I/O
-   priority level.  */
-#define AIO_PRIO_DELTA_MAX	20
-
-/* Minimum size for a thread.  We are free to choose a reasonable value.  */
-#define PTHREAD_STACK_MIN	16384
-
-/* Maximum number of POSIX timers available.  */
-#define TIMER_MAX	256
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/posix_opt.h b/newlib/libc/sys/linux/linuxthreads/bits/posix_opt.h
deleted file mode 100644
index 54640bb56..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/posix_opt.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* Define POSIX options for Linux.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef	_POSIX_OPT_H
-#define	_POSIX_OPT_H	1
-
-/* Job control is supported.  */
-#define	_POSIX_JOB_CONTROL	1
-
-/* Processes have a saved set-user-ID and a saved set-group-ID.  */
-#define	_POSIX_SAVED_IDS	1
-
-/* Priority scheduling is supported.  */
-#define	_POSIX_PRIORITY_SCHEDULING	1
-
-/* Synchronizing file data is supported.  */
-#define	_POSIX_SYNCHRONIZED_IO	1
-
-/* The fsync function is present.  */
-#define	_POSIX_FSYNC	1
-
-/* Mapping of files to memory is supported.  */
-#define	_POSIX_MAPPED_FILES	1
-
-/* Locking of all memory is supported.  */
-#define	_POSIX_MEMLOCK	1
-
-/* Locking of ranges of memory is supported.  */
-#define	_POSIX_MEMLOCK_RANGE	1
-
-/* Setting of memory protections is supported.  */
-#define	_POSIX_MEMORY_PROTECTION	1
-
-/* Implementation supports `poll' function.  */
-#define	_POSIX_POLL	1
-
-/* Implementation supports `select' and `pselect' functions.  */
-#define	_POSIX_SELECT	1
-
-/* Only root can change owner of file.  */
-#define	_POSIX_CHOWN_RESTRICTED	1
-
-/* `c_cc' member of 'struct termios' structure can be disabled by
-   using the value _POSIX_VDISABLE.  */
-#define	_POSIX_VDISABLE	'\0'
-
-/* Filenames are not silently truncated.  */
-#define	_POSIX_NO_TRUNC	1
-
-/* X/Open realtime support is available.  */
-#define _XOPEN_REALTIME	1
-
-/* X/Open realtime thread support is available.  */
-#define _XOPEN_REALTIME_THREADS	1
-
-/* XPG4.2 shared memory is supported.  */
-#define	_XOPEN_SHM	1
-
-/* Tell we have POSIX threads.  */
-#define _POSIX_THREADS	1
-
-/* We have the reentrant functions described in POSIX.  */
-#define _POSIX_REENTRANT_FUNCTIONS      1
-#define _POSIX_THREAD_SAFE_FUNCTIONS	1
-
-/* We provide priority scheduling for threads.  */
-#define	_POSIX_THREAD_PRIORITY_SCHEDULING	1
-
-/* We support user-defined stack sizes.  */
-#define _POSIX_THREAD_ATTR_STACKSIZE	1
-
-/* We support user-defined stacks.  */
-#define _POSIX_THREAD_ATTR_STACKADDR	1
-
-/* We support POSIX.1b semaphores, but only the non-shared form for now.  */
-#define _POSIX_SEMAPHORES	1
-
-/* Real-time signals are supported.  */
-#define _POSIX_REALTIME_SIGNALS	1
-
-/* We support asynchronous I/O.  */
-#define _POSIX_ASYNCHRONOUS_IO	1
-#define _POSIX_ASYNC_IO		1
-/* Alternative name for Unix98.  */
-#define _LFS_ASYNCHRONOUS_IO	1
-
-/* The LFS support in asynchronous I/O is also available.  */
-#define _LFS64_ASYNCHRONOUS_IO	1
-
-/* The rest of the LFS is also available.  */
-#define _LFS_LARGEFILE		1
-#define _LFS64_LARGEFILE	1
-#define _LFS64_STDIO		1
-
-/* POSIX shared memory objects are implemented.  */
-#define _POSIX_SHARED_MEMORY_OBJECTS	1
-
-/* GNU libc provides regular expression handling.  */
-#define _POSIX_REGEXP	1
-
-/* Reader/Writer locks are available.  */
-#define _POSIX_READER_WRITER_LOCKS	200912L
-
-/* We have a POSIX shell.  */
-#define _POSIX_SHELL	1
-
-/* We support the Timeouts option.  */
-#define _POSIX_TIMEOUTS	200912L
-
-/* We support spinlocks.  */
-#define _POSIX_SPIN_LOCKS	200912L
-
-/* The `spawn' function family is supported.  */
-#define _POSIX_SPAWN	200912L
-
-/* We have POSIX timers.  */
-#define _POSIX_TIMERS	1
-
-/* The barrier functions are available.  */
-#define _POSIX_BARRIERS	200912L
-
-/* POSIX message queues are not yet supported.  */
-#undef	_POSIX_MESSAGE_PASSING
-
-#endif /* posix_opt.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/pthreadtypes.h b/newlib/libc/sys/linux/linuxthreads/bits/pthreadtypes.h
deleted file mode 100644
index 3ee5c4813..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/pthreadtypes.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#if !defined _BITS_TYPES_H && !defined _PTHREAD_H
-# error "Never include <bits/pthreadtypes.h> directly; use <sys/types.h> instead."
-#endif
-
-#ifndef _BITS_PTHREADTYPES_H
-#define _BITS_PTHREADTYPES_H	1
-
-#define __need_schedparam
-#include <bits/sched.h>
-
-/* Fast locks (not abstract because mutexes and conditions aren't abstract). */
-struct _pthread_fastlock
-{
-  long int __status;   /* "Free" or "taken" or head of waiting list */
-  int __spinlock;      /* Used by compare_and_swap emulation. Also,
-			  adaptive SMP lock stores spin count here. */
-};
-
-#ifndef _PTHREAD_DESCR_DEFINED
-/* Thread descriptors */
-typedef struct _pthread_descr_struct *_pthread_descr;
-# define _PTHREAD_DESCR_DEFINED
-#endif
-
-
-/* Attributes for threads.  */
-typedef struct __pthread_attr_s
-{
-  int __detachstate;
-  int __schedpolicy;
-  struct __sched_param __schedparam;
-  int __inheritsched;
-  int __scope;
-  size_t __guardsize;
-  int __stackaddr_set;
-  void *__stackaddr;
-  size_t __stacksize;
-} pthread_attr_t;
-
-
-/* Conditions (not abstract because of PTHREAD_COND_INITIALIZER */
-typedef struct
-{
-  struct _pthread_fastlock __c_lock; /* Protect against concurrent access */
-  _pthread_descr __c_waiting;        /* Threads waiting on this condition */
-} pthread_cond_t;
-
-
-/* Attribute for conditionally variables.  */
-typedef struct
-{
-  int __dummy;
-} pthread_condattr_t;
-
-/* Keys for thread-specific data */
-typedef unsigned int pthread_key_t;
-
-
-/* Mutexes (not abstract because of PTHREAD_MUTEX_INITIALIZER).  */
-/* (The layout is unnatural to maintain binary compatibility
-    with earlier releases of LinuxThreads.) */
-typedef struct
-{
-  int __m_reserved;               /* Reserved for future use */
-  int __m_count;                  /* Depth of recursive locking */
-  _pthread_descr __m_owner;       /* Owner thread (if recursive or errcheck) */
-  int __m_kind;                   /* Mutex kind: fast, recursive or errcheck */
-  struct _pthread_fastlock __m_lock; /* Underlying fast lock */
-} pthread_mutex_t;
-
-
-/* Attribute for mutex.  */
-typedef struct
-{
-  int __mutexkind;
-} pthread_mutexattr_t;
-
-
-/* Once-only execution */
-typedef int pthread_once_t;
-
-
-#ifdef __USE_UNIX98
-/* Read-write locks.  */
-typedef struct _pthread_rwlock_t
-{
-  struct _pthread_fastlock __rw_lock; /* Lock to guarantee mutual exclusion */
-  int __rw_readers;                   /* Number of readers */
-  _pthread_descr __rw_writer;         /* Identity of writer, or NULL if none */
-  _pthread_descr __rw_read_waiting;   /* Threads waiting for reading */
-  _pthread_descr __rw_write_waiting;  /* Threads waiting for writing */
-  int __rw_kind;                      /* Reader/Writer preference selection */
-  int __rw_pshared;                   /* Shared between processes or not */
-} pthread_rwlock_t;
-
-
-/* Attribute for read-write locks.  */
-typedef struct
-{
-  int __lockkind;
-  int __pshared;
-} pthread_rwlockattr_t;
-#endif
-
-#ifdef __USE_XOPEN2K
-/* POSIX spinlock data type.  */
-typedef volatile int pthread_spinlock_t;
-
-/* POSIX barrier. */
-typedef struct {
-  struct _pthread_fastlock __ba_lock; /* Lock to guarantee mutual exclusion */
-  int __ba_required;                  /* Threads needed for completion */
-  int __ba_present;                   /* Threads waiting */
-  _pthread_descr __ba_waiting;        /* Queue of waiting threads */
-} pthread_barrier_t;
-
-/* barrier attribute */
-typedef struct {
-  int __pshared;
-} pthread_barrierattr_t;
-
-#endif
-
-
-/* Thread identifiers */
-typedef unsigned long int pthread_t;
-
-#endif	/* bits/pthreadtypes.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/bits/sigthread.h b/newlib/libc/sys/linux/linuxthreads/bits/sigthread.h
deleted file mode 100644
index 1c62d8196..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bits/sigthread.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Signal handling function for threaded programs.
-   Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _BITS_SIGTHREAD_H
-#define _BITS_SIGTHREAD_H	1
-
-#if !defined _SIGNAL_H && !defined _PTHREAD_H
-# error "Never include this file directly.  Use <pthread.h> instead"
-#endif
-
-/* Functions for handling signals. */
-
-/* Modify the signal mask for the calling thread.  The arguments have
-   the same meaning as for sigprocmask(2). */
-extern int pthread_sigmask (int __how,
-			    __const sigset_t *__restrict __newmask,
-			    sigset_t *__restrict __oldmask)__THROW;
-
-/* Send signal SIGNO to the given thread. */
-extern int pthread_kill (pthread_t __thread1, int __signo) __THROW;
-
-#endif	/* bits/sigthread.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/bp-sym.h b/newlib/libc/sys/linux/linuxthreads/bp-sym.h
deleted file mode 100644
index 1aeb2364e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/bp-sym.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Bounded-pointer symbol modifier.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Greg McGary <greg@mcgary.org>
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define BP_SYM(name) _BP_SYM (name)
-#if __BOUNDED_POINTERS__
-# define _BP_SYM(name) __BP_##name
-#else
-# define _BP_SYM(name) name
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/cancel.c b/newlib/libc/sys/linux/linuxthreads/cancel.c
deleted file mode 100644
index 0fd6cd094..000000000
--- a/newlib/libc/sys/linux/linuxthreads/cancel.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Thread cancellation */
-
-#include <errno.h>
-#include <rpc/rpc.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-
-#ifdef _STACK_GROWS_DOWN
-# define FRAME_LEFT(frame, other) ((char *) frame >= (char *) other)
-#elif _STACK_GROWS_UP
-# define FRAME_LEFT(frame, other) ((char *) frame <= (char *) other)
-#else
-# error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP"
-#endif
-
-
-int pthread_setcancelstate(int state, int * oldstate)
-{
-  pthread_descr self = thread_self();
-  if (state < PTHREAD_CANCEL_ENABLE || state > PTHREAD_CANCEL_DISABLE)
-    return EINVAL;
-  if (oldstate != NULL) *oldstate = THREAD_GETMEM(self, p_cancelstate);
-  THREAD_SETMEM(self, p_cancelstate, state);
-  if (THREAD_GETMEM(self, p_canceled) &&
-      THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE &&
-      THREAD_GETMEM(self, p_canceltype) == PTHREAD_CANCEL_ASYNCHRONOUS)
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  return 0;
-}
-
-int pthread_setcanceltype(int type, int * oldtype)
-{
-  pthread_descr self = thread_self();
-  if (type < PTHREAD_CANCEL_DEFERRED || type > PTHREAD_CANCEL_ASYNCHRONOUS)
-    return EINVAL;
-  if (oldtype != NULL) *oldtype = THREAD_GETMEM(self, p_canceltype);
-  THREAD_SETMEM(self, p_canceltype, type);
-  if (THREAD_GETMEM(self, p_canceled) &&
-      THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE &&
-      THREAD_GETMEM(self, p_canceltype) == PTHREAD_CANCEL_ASYNCHRONOUS)
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  return 0;
-}
-
-int pthread_cancel(pthread_t thread)
-{
-  pthread_handle handle = thread_handle(thread);
-  int pid;
-  int dorestart = 0;
-  pthread_descr th;
-  pthread_extricate_if *pextricate;
-  int already_canceled;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (invalid_handle(handle, thread)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-
-  th = handle->h_descr;
-
-  already_canceled = th->p_canceled;
-  th->p_canceled = 1;
-
-  if (th->p_cancelstate == PTHREAD_CANCEL_DISABLE || already_canceled) {
-    __pthread_unlock(&handle->h_lock);
-    return 0;
-  }
-
-  pextricate = th->p_extricate;
-  pid = th->p_pid;
-
-  /* If the thread has registered an extrication interface, then
-     invoke the interface. If it returns 1, then we succeeded in
-     dequeuing the thread from whatever waiting object it was enqueued
-     with. In that case, it is our responsibility to wake it up.
-     And also to set the p_woken_by_cancel flag so the woken thread
-     can tell that it was woken by cancellation. */
-
-  if (pextricate != NULL) {
-    dorestart = pextricate->pu_extricate_func(pextricate->pu_object, th);
-    th->p_woken_by_cancel = dorestart;
-  }
-
-  __pthread_unlock(&handle->h_lock);
-
-  /* If the thread has suspended or is about to, then we unblock it by
-     issuing a restart, instead of a cancel signal. Otherwise we send
-     the cancel signal to unblock the thread from a cancellation point,
-     or to initiate asynchronous cancellation. The restart is needed so
-     we have proper accounting of restarts; suspend decrements the thread's
-     resume count, and restart() increments it.  This also means that suspend's
-     handling of the cancel signal is obsolete. */
-
-  if (dorestart)
-    restart(th);
-  else
-    kill(pid, __pthread_sig_cancel);
-
-  return 0;
-}
-
-void pthread_testcancel(void)
-{
-  pthread_descr self = thread_self();
-  if (THREAD_GETMEM(self, p_canceled)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE)
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-}
-
-void _pthread_cleanup_push(struct _pthread_cleanup_buffer * buffer,
-			   void (*routine)(void *), void * arg)
-{
-  pthread_descr self = thread_self();
-  buffer->__routine = routine;
-  buffer->__arg = arg;
-  buffer->__prev = THREAD_GETMEM(self, p_cleanup);
-  if (buffer->__prev != NULL && FRAME_LEFT (buffer, buffer->__prev))
-    buffer->__prev = NULL;
-  THREAD_SETMEM(self, p_cleanup, buffer);
-}
-
-void _pthread_cleanup_pop(struct _pthread_cleanup_buffer * buffer,
-			  int execute)
-{
-  pthread_descr self = thread_self();
-  if (execute) buffer->__routine(buffer->__arg);
-  THREAD_SETMEM(self, p_cleanup, buffer->__prev);
-}
-
-void _pthread_cleanup_push_defer(struct _pthread_cleanup_buffer * buffer,
-				 void (*routine)(void *), void * arg)
-{
-  pthread_descr self = thread_self();
-  buffer->__routine = routine;
-  buffer->__arg = arg;
-  buffer->__canceltype = THREAD_GETMEM(self, p_canceltype);
-  buffer->__prev = THREAD_GETMEM(self, p_cleanup);
-  if (buffer->__prev != NULL && FRAME_LEFT (buffer, buffer->__prev))
-    buffer->__prev = NULL;
-  THREAD_SETMEM(self, p_canceltype, PTHREAD_CANCEL_DEFERRED);
-  THREAD_SETMEM(self, p_cleanup, buffer);
-}
-
-void _pthread_cleanup_pop_restore(struct _pthread_cleanup_buffer * buffer,
-				  int execute)
-{
-  pthread_descr self = thread_self();
-  if (execute) buffer->__routine(buffer->__arg);
-  THREAD_SETMEM(self, p_cleanup, buffer->__prev);
-  THREAD_SETMEM(self, p_canceltype, buffer->__canceltype);
-  if (THREAD_GETMEM(self, p_canceled) &&
-      THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE &&
-      THREAD_GETMEM(self, p_canceltype) == PTHREAD_CANCEL_ASYNCHRONOUS)
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-}
-
-void __pthread_perform_cleanup(char *currentframe)
-{
-  pthread_descr self = thread_self();
-  struct _pthread_cleanup_buffer *c = THREAD_GETMEM(self, p_cleanup);
-  struct _pthread_cleanup_buffer *last;
-
-  if (c != NULL)
-    while (FRAME_LEFT (currentframe, c))
-      {
-	last = c;
-	c = c->__prev;
-
-	if (c == NULL || FRAME_LEFT (last, c))
-	  {
-	    c = NULL;
-	    break;
-	  }
-      }
-
-  while (c != NULL)
-    {
-      c->__routine(c->__arg);
-
-      last = c;
-      c = c->__prev;
-
-      if (FRAME_LEFT (last, c))
-	break;
-    }
-
-#if 0
-  /* And the TSD which needs special help.  */
-  if (THREAD_GETMEM(self, p_libc_specific[_LIBC_TSD_KEY_RPC_VARS]) != NULL)
-    __rpc_thread_destroy ();
-#endif
-}
-
-#ifndef SHARED
-/* We need a hook to force the cancelation wrappers and file locking
-   to be linked in when static libpthread is used.  */
-extern const int __pthread_provide_wrappers;
-static const int *const __pthread_require_wrappers =
-  &__pthread_provide_wrappers;
-extern const int __pthread_provide_lockfile;
-static const int *const __pthread_require_lockfile =
-  &__pthread_provide_lockfile;
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/condvar.c b/newlib/libc/sys/linux/linuxthreads/condvar.c
deleted file mode 100644
index a06211f58..000000000
--- a/newlib/libc/sys/linux/linuxthreads/condvar.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/* and Pavel Krauz (krauz@fsid.cvut.cz).                                */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Condition variables */
-
-#include <errno.h>
-#include <sched.h>
-#include <stddef.h>
-#include <sys/time.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "queue.h"
-#include "restart.h"
-
-int pthread_cond_init(pthread_cond_t *cond,
-                      const pthread_condattr_t *cond_attr)
-{
-  __pthread_init_lock(&cond->__c_lock);
-  cond->__c_waiting = NULL;
-  return 0;
-}
-
-int pthread_cond_destroy(pthread_cond_t *cond)
-{
-  if (cond->__c_waiting != NULL) return EBUSY;
-  return 0;
-}
-
-/* Function called by pthread_cancel to remove the thread from
-   waiting on a condition variable queue. */
-
-static int cond_extricate_func(void *obj, pthread_descr th)
-{
-  volatile pthread_descr self = thread_self();
-  pthread_cond_t *cond = obj;
-  int did_remove = 0;
-
-  __pthread_lock(&cond->__c_lock, self);
-  did_remove = remove_from_queue(&cond->__c_waiting, th);
-  __pthread_unlock(&cond->__c_lock);
-
-  return did_remove;
-}
-
-int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
-{
-  volatile pthread_descr self = thread_self();
-  pthread_extricate_if extr;
-  int already_canceled = 0;
-  int spurious_wakeup_count;
-
-  /* Check whether the mutex is locked and owned by this thread.  */
-  if (mutex->__m_kind != PTHREAD_MUTEX_TIMED_NP
-      && mutex->__m_kind != PTHREAD_MUTEX_ADAPTIVE_NP
-      && mutex->__m_owner != self)
-    return EINVAL;
-
-  /* Set up extrication interface */
-  extr.pu_object = cond;
-  extr.pu_extricate_func = cond_extricate_func;
-
-  /* Register extrication interface */
-  THREAD_SETMEM(self, p_condvar_avail, 0);
-  __pthread_set_own_extricate_if(self, &extr);
-
-  /* Atomically enqueue thread for waiting, but only if it is not
-     canceled. If the thread is canceled, then it will fall through the
-     suspend call below, and then call pthread_exit without
-     having to worry about whether it is still on the condition variable queue.
-     This depends on pthread_cancel setting p_canceled before calling the
-     extricate function. */
-
-  __pthread_lock(&cond->__c_lock, self);
-  if (!(THREAD_GETMEM(self, p_canceled)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE))
-    enqueue(&cond->__c_waiting, self);
-  else
-    already_canceled = 1;
-  __pthread_unlock(&cond->__c_lock);
-
-  if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  pthread_mutex_unlock(mutex);
-
-  spurious_wakeup_count = 0;
-  while (1)
-    {
-      suspend(self);
-      if (THREAD_GETMEM(self, p_condvar_avail) == 0
-	  && (THREAD_GETMEM(self, p_woken_by_cancel) == 0
-	      || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE))
-	{
-	  /* Count resumes that don't belong to us. */
-	  spurious_wakeup_count++;
-	  continue;
-	}
-      break;
-    }
-
-  __pthread_set_own_extricate_if(self, 0);
-
-  /* Check for cancellation again, to provide correct cancellation
-     point behavior */
-
-  if (THREAD_GETMEM(self, p_woken_by_cancel)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-    THREAD_SETMEM(self, p_woken_by_cancel, 0);
-    pthread_mutex_lock(mutex);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  /* Put back any resumes we caught that don't belong to us. */
-  while (spurious_wakeup_count--)
-    restart(self);
-
-  pthread_mutex_lock(mutex);
-  return 0;
-}
-
-static int
-pthread_cond_timedwait_relative(pthread_cond_t *cond,
-				pthread_mutex_t *mutex,
-				const struct timespec * abstime)
-{
-  volatile pthread_descr self = thread_self();
-  int already_canceled = 0;
-  pthread_extricate_if extr;
-  int spurious_wakeup_count;
-
-  /* Check whether the mutex is locked and owned by this thread.  */
-  if (mutex->__m_kind != PTHREAD_MUTEX_TIMED_NP
-      && mutex->__m_kind != PTHREAD_MUTEX_ADAPTIVE_NP
-      && mutex->__m_owner != self)
-    return EINVAL;
-
-  /* Set up extrication interface */
-  extr.pu_object = cond;
-  extr.pu_extricate_func = cond_extricate_func;
-
-  /* Register extrication interface */
-  THREAD_SETMEM(self, p_condvar_avail, 0);
-  __pthread_set_own_extricate_if(self, &extr);
-
-  /* Enqueue to wait on the condition and check for cancellation. */
-  __pthread_lock(&cond->__c_lock, self);
-  if (!(THREAD_GETMEM(self, p_canceled)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE))
-    enqueue(&cond->__c_waiting, self);
-  else
-    already_canceled = 1;
-  __pthread_unlock(&cond->__c_lock);
-
-  if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  pthread_mutex_unlock(mutex);
-
-  spurious_wakeup_count = 0;
-  while (1)
-    {
-      if (!timedsuspend(self, abstime)) {
-	int was_on_queue;
-
-	/* __pthread_lock will queue back any spurious restarts that
-	   may happen to it. */
-
-	__pthread_lock(&cond->__c_lock, self);
-	was_on_queue = remove_from_queue(&cond->__c_waiting, self);
-	__pthread_unlock(&cond->__c_lock);
-
-	if (was_on_queue) {
-	  __pthread_set_own_extricate_if(self, 0);
-	  pthread_mutex_lock(mutex);
-	  return ETIMEDOUT;
-	}
-
-	/* Eat the outstanding restart() from the signaller */
-	suspend(self);
-      }
-
-      if (THREAD_GETMEM(self, p_condvar_avail) == 0
-	  && (THREAD_GETMEM(self, p_woken_by_cancel) == 0
-	      || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE))
-	{
-	  /* Count resumes that don't belong to us. */
-	  spurious_wakeup_count++;
-	  continue;
-	}
-      break;
-    }
-
-  __pthread_set_own_extricate_if(self, 0);
-
-  /* The remaining logic is the same as in other cancellable waits,
-     such as pthread_join sem_wait or pthread_cond wait. */
-
-  if (THREAD_GETMEM(self, p_woken_by_cancel)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-    THREAD_SETMEM(self, p_woken_by_cancel, 0);
-    pthread_mutex_lock(mutex);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  /* Put back any resumes we caught that don't belong to us. */
-  while (spurious_wakeup_count--)
-    restart(self);
-
-  pthread_mutex_lock(mutex);
-  return 0;
-}
-
-int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
-                           const struct timespec * abstime)
-{
-  /* Indirect call through pointer! */
-  return pthread_cond_timedwait_relative(cond, mutex, abstime);
-}
-
-int pthread_cond_signal(pthread_cond_t *cond)
-{
-  pthread_descr th;
-
-  __pthread_lock(&cond->__c_lock, NULL);
-  th = dequeue(&cond->__c_waiting);
-  __pthread_unlock(&cond->__c_lock);
-  if (th != NULL) {
-    th->p_condvar_avail = 1;
-    WRITE_MEMORY_BARRIER();
-    restart(th);
-  }
-  return 0;
-}
-
-int pthread_cond_broadcast(pthread_cond_t *cond)
-{
-  pthread_descr tosignal, th;
-
-  __pthread_lock(&cond->__c_lock, NULL);
-  /* Copy the current state of the waiting queue and empty it */
-  tosignal = cond->__c_waiting;
-  cond->__c_waiting = NULL;
-  __pthread_unlock(&cond->__c_lock);
-  /* Now signal each process in the queue */
-  while ((th = dequeue(&tosignal)) != NULL) {
-    th->p_condvar_avail = 1;
-    WRITE_MEMORY_BARRIER();
-    restart(th);
-  }
-  return 0;
-}
-
-int pthread_condattr_init(pthread_condattr_t *attr)
-{
-  return 0;
-}
-
-int pthread_condattr_destroy(pthread_condattr_t *attr)
-{
-  return 0;
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-
-int pthread_condattr_getpshared (const pthread_condattr_t *attr, int *pshared)
-{
-  *pshared = PTHREAD_PROCESS_PRIVATE;
-  return 0;
-}
-
-int pthread_condattr_setpshared (pthread_condattr_t *attr, int pshared)
-{
-  if (pshared != PTHREAD_PROCESS_PRIVATE && pshared != PTHREAD_PROCESS_SHARED)
-    return EINVAL;
-
-  /* For now it is not possible to shared a conditional variable.  */
-  if (pshared != PTHREAD_PROCESS_PRIVATE)
-    return ENOSYS;
-
-  return 0;
-}
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 3 */
-
diff --git a/newlib/libc/sys/linux/linuxthreads/config.h b/newlib/libc/sys/linux/linuxthreads/config.h
deleted file mode 100644
index 99b0528a6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/config.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#define HAVE_WEAK_SYMBOLS 1
-#define HAVE_GNU_LD 1
-#define HAVE_ELF 1
-#define __ASSUME_REALTIME_SIGNALS 1
-#define ASM_GLOBAL_DIRECTIVE .global
-
-#define TEMP_FAILURE_RETRY(expression) \
-  (__extension__                                                              \
-    ({ long int __result;                                                     \
-       do __result = (long int) (expression);                                 \
-       while (__result == -1L && errno == EINTR);                             \
-       __result; }))
-
-#define UINT32_C(c)    c ## U
diff --git a/newlib/libc/sys/linux/linuxthreads/configure b/newlib/libc/sys/linux/linuxthreads/configure
deleted file mode 100755
index 47404e5ea..000000000
--- a/newlib/libc/sys/linux/linuxthreads/configure
+++ /dev/null
@@ -1,3461 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=attr.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../../.. $srcdir/../../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../../.. $srcdir/../../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-for ac_prog in mawk gawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-fi
-
-if test -n "${machine_dir}"; then
-  MACHINE_OBJLIST=machine/${machine_dir}/objectlist.awk.in
-  MACHINE_LIB=machine/${machine_dir}/lib.a
-fi
-
-
-
-subdirs="machine"
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@AWK@%$AWK%g
-s%@MACHINE_OBJLIST@%$MACHINE_OBJLIST%g
-s%@MACHINE_LIB@%$MACHINE_LIB%g
-s%@subdirs@%$subdirs%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in machine; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/sys/linux/linuxthreads/configure.in b/newlib/libc/sys/linux/linuxthreads/configure.in
deleted file mode 100644
index 113743a87..000000000
--- a/newlib/libc/sys/linux/linuxthreads/configure.in
+++ /dev/null
@@ -1,31 +0,0 @@
-dnl This is the newlib/libc/sys/linux/linuxthreads configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(attr.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../../..)
-
-NEWLIB_CONFIGURE(../../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-AC_PROG_AWK
-fi
-
-if test -n "${machine_dir}"; then
-  MACHINE_OBJLIST=machine/${machine_dir}/objectlist.awk.in
-  MACHINE_LIB=machine/${machine_dir}/lib.a
-fi
-AC_SUBST(MACHINE_OBJLIST)
-AC_SUBST(MACHINE_LIB)
-
-AC_CONFIG_SUBDIRS(machine)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/linux/linuxthreads/defs.awk b/newlib/libc/sys/linux/linuxthreads/defs.awk
deleted file mode 100644
index 7ca5a3364..000000000
--- a/newlib/libc/sys/linux/linuxthreads/defs.awk
+++ /dev/null
@@ -1,27 +0,0 @@
-/^[ 	]*\.endp/	 { need_endp = 1 }
-/^[ 	]*\.end/	 { need_end = 1 }
-/^[ 	]*\.align/ { if($2 > max) max = $2; }
-
-END {
-    if(need_endp)
-    {
-	print "#define END_INIT .endp _init";
-	print "#define END_FINI .endp _fini";
-    } else if(need_end)
-    {
-	print "#define END_INIT .end _init";
-	print "#define END_FINI .end _fini";
-    }
-    else
-    {
-	print "#define END_INIT";
-	print "#define END_FINI";
-    }
-    if(max)
-	print "#define ALIGN .align", max;
-    else
-	print "#define ALIGN";
-
-    print "#include <libc-symbols.h>";
-    print "weak_extern (__gmon_start__)";
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/ecmutex.c b/newlib/libc/sys/linux/linuxthreads/ecmutex.c
deleted file mode 100644
index ce54ddf33..000000000
--- a/newlib/libc/sys/linux/linuxthreads/ecmutex.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* Test of the error checking mutex and incidently also barriers.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-
-static pthread_mutex_t locks[] =
-{
-  PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
-  PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
-  PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
-  PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
-  PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP
-};
-#define nlocks ((int) (sizeof (locks) / sizeof (locks[0])))
-
-static pthread_barrier_t barrier;
-#define SYNC pthread_barrier_wait (&barrier)
-
-#define NTHREADS nlocks
-
-#define ROUNDS 20
-
-
-static void *
-worker (void *arg)
-{
-  /* We are locking the and unlocked the locks and check the errors.
-     Since we are using the error-checking variant the implementation
-     should report them.  */
-  int nr = (long int) arg;
-  int i;
-  void *result = NULL;
-  int retval;
-
-  for (i = 0; i < ROUNDS; ++i)
-    {
-      /* Skip the rounds which would make other == own.  */
-      if (i % nlocks == 0)
-	continue;
-
-      /* Get the "own" mutex.  */
-      if (pthread_mutex_trylock (&locks[nr]) != 0)
-	{
-	  printf ("thread %d failed getting own mutex\n", nr);
-	  result = (void *) 1;
-	}
-
-      /* Try locking "own" mutex again.  */
-      retval = pthread_mutex_lock (&locks[nr]);
-      if (retval != EDEADLK)
-	{
-	  printf ("thread %d failed getting own mutex\n", nr);
-	  result = (void *) 1;
-	}
-
-      /* Try to get a different semaphore.  */
-      SYNC;
-      retval = pthread_mutex_trylock (&locks[(nr + i) % nlocks]);
-      if (retval != EBUSY)
-	{
-	  printf ("thread %d didn't deadlock on getting %d's lock\n",
-		  nr, (nr + i) % nlocks);
-	  result = (void *) 1;
-	}
-
-      /* Try unlocking other's lock.  */
-      retval = pthread_mutex_unlock (&locks[(nr + i) % nlocks]);
-      if (retval != EPERM)
-	{
-	  printf ("thread %d managed releasing mutex %d\n",
-		  nr, (nr + i) % nlocks);
-	  result = (void *) 1;
-	}
-
-      /* All lock one mutex now.  */
-      SYNC;
-      retval = pthread_mutex_lock (&locks[i % nlocks]);
-      if (nr == (i % nlocks))
-	{
-	  if (retval != EDEADLK)
-	    {
-	      printf ("thread %d didn't deadlock on getting %d's lock\n",
-		      nr, (nr + i) % nlocks);
-	      result = (void *) 1;
-	    }
-	  if (pthread_mutex_unlock (&locks[i % nlocks]) != 0)
-	    {
-	      printf ("thread %d failed releasing own mutex\n", nr);
-	      result = (void *) 1;
-	    }
-	}
-      else
-	{
-	  if (retval != 0)
-	    {
-	      printf ("thread %d failed acquiring mutex %d\n",
-		      nr, i % nlocks);
-	      result = (void *) 1;
-	    }
-	  else if (pthread_mutex_unlock (&locks[i % nlocks]) != 0)
-	    {
-	      printf ("thread %d failed releasing mutex %d\n",
-		      nr, i % nlocks);
-	      result = (void *) 1;
-	    }
-	}
-
-      /* Unlock the own lock.  */
-      SYNC;
-      if (nr != (i % nlocks) && pthread_mutex_unlock (&locks[nr]) != 0)
-	{
-	  printf ("thread %d failed releasing own mutex\n", nr);
-	  result = (void *) 1;
-	}
-
-      /* Try unlocking again.  */
-      retval = pthread_mutex_unlock (&locks[nr]);
-      if (retval == 0)
-	{
-	  printf ("thread %d managed releasing own mutex twice\n", nr);
-	  result = (void *) 1;
-	}
-    }
-
-  return result;
-}
-
-
-#define TEST_FUNCTION do_test ()
-static int
-do_test (void)
-{
-  pthread_t threads[NTHREADS];
-  int i;
-  void *res;
-  int result = 0;
-
-  pthread_barrier_init (&barrier, NULL, NTHREADS);
-
-  for (i = 0; i < NTHREADS; ++i)
-    if (pthread_create (&threads[i], NULL, worker, (void *) (long int) i) != 0)
-      {
-	printf ("failed to create thread %d: %m\n", i);
-	exit (1);
-      }
-
-  for (i = 0; i < NTHREADS; ++i)
-    if (pthread_join (threads[i], &res) != 0 || res != NULL)
-      result = 1;
-
-  return result;
-}
-
-#include "../test-skeleton.c"
diff --git a/newlib/libc/sys/linux/linuxthreads/events.c b/newlib/libc/sys/linux/linuxthreads/events.c
deleted file mode 100644
index c65bafc76..000000000
--- a/newlib/libc/sys/linux/linuxthreads/events.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Event functions used while debugging.
-   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* The functions contained here do nothing, they just return.  */
-
-#include "internals.h"
-
-void
-__linuxthreads_create_event (void)
-{
-}
-
-void
-__linuxthreads_death_event (void)
-{
-}
-
-void
-__linuxthreads_reap_event (void)
-{
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/getcpuclockid.c b/newlib/libc/sys/linux/linuxthreads/getcpuclockid.c
deleted file mode 100644
index 76d39a5de..000000000
--- a/newlib/libc/sys/linux/linuxthreads/getcpuclockid.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <sys/time.h>
-#include <internals.h>
-
-int
-pthread_getcpuclockid (pthread_t thread_id, clockid_t *clock_id)
-{
-  /* We don't allow any process ID but our own.  */
-  if (thread_handle (thread_id)->h_descr != thread_self ())
-    return EPERM;
-
-#ifdef CLOCK_THREAD_CPUTIME_ID
-  /* Store the number.  */
-  *clock_id = CLOCK_THREAD_CPUTIME_ID;
-
-  return 0;
-#else
-  /* We don't have a timer for that.  */
-  return ENOENT;
-#endif
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/getreent.c b/newlib/libc/sys/linux/linuxthreads/getreent.c
deleted file mode 100644
index e73c4a531..000000000
--- a/newlib/libc/sys/linux/linuxthreads/getreent.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* get thread-specific reentrant pointer */
-
-#include <internals.h>
-
-struct _reent *
-__getreent (void)
-{
-  pthread_descr self = thread_self();
-  return THREAD_GETMEM(self, p_reentp);
-}
-
diff --git a/newlib/libc/sys/linux/linuxthreads/internals.h b/newlib/libc/sys/linux/linuxthreads/internals.h
deleted file mode 100644
index 6da0deb43..000000000
--- a/newlib/libc/sys/linux/linuxthreads/internals.h
+++ /dev/null
@@ -1,576 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#ifndef _INTERNALS_H
-#define _INTERNALS_H	1
-
-/* Internal data structures */
-
-/* Includes */
-
-#include <limits.h>
-#include <resolv.h>
-#include <setjmp.h>
-#include <signal.h>
-#include <unistd.h>
-#include <stackinfo.h>
-#include <sys/types.h>
-#include <reent.h>
-#include <bits/libc-tsd.h> /* for _LIBC_TSD_KEY_N */
-
-extern long int testandset (int *spinlock);
-extern int __compare_and_swap (long int *p, long int oldval, long int newval);
-
-#include "libc-symbols.h"
-#include "pt-machine.h"
-#include "semaphore.h"
-#include "thread_dbP.h"
-#include <hp-timing.h>
-
-#ifndef THREAD_GETMEM
-# define THREAD_GETMEM(descr, member) descr->member
-#endif
-#ifndef THREAD_GETMEM_NC
-# define THREAD_GETMEM_NC(descr, member) descr->member
-#endif
-#ifndef THREAD_SETMEM
-# define THREAD_SETMEM(descr, member, value) descr->member = (value)
-#endif
-#ifndef THREAD_SETMEM_NC
-# define THREAD_SETMEM_NC(descr, member, value) descr->member = (value)
-#endif
-
-/* Arguments passed to thread creation routine */
-
-struct pthread_start_args {
-  void * (*start_routine)(void *); /* function to run */
-  void * arg;                   /* its argument */
-  sigset_t mask;                /* initial signal mask for thread */
-  int schedpolicy;              /* initial scheduling policy (if any) */
-  struct __sched_param schedparam; /* initial scheduling parameters (if any) */
-};
-
-
-/* We keep thread specific data in a special data structure, a two-level
-   array.  The top-level array contains pointers to dynamically allocated
-   arrays of a certain number of data pointers.  So we can implement a
-   sparse array.  Each dynamic second-level array has
-	PTHREAD_KEY_2NDLEVEL_SIZE
-   entries.  This value shouldn't be too large.  */
-#define PTHREAD_KEY_2NDLEVEL_SIZE	32
-
-/* We need to address PTHREAD_KEYS_MAX key with PTHREAD_KEY_2NDLEVEL_SIZE
-   keys in each subarray.  */
-#define PTHREAD_KEY_1STLEVEL_SIZE \
-  ((PTHREAD_KEYS_MAX + PTHREAD_KEY_2NDLEVEL_SIZE - 1) \
-   / PTHREAD_KEY_2NDLEVEL_SIZE)
-
-typedef void (*destr_function)(void *);
-
-struct pthread_key_struct {
-  int in_use;                   /* already allocated? */
-  destr_function destr;         /* destruction routine */
-};
-
-
-#define PTHREAD_START_ARGS_INITIALIZER(fct) \
-  { (void *(*) (void *)) fct, NULL, {{0, }}, 0, { 0 } }
-
-/* The type of thread descriptors */
-
-typedef struct _pthread_descr_struct * pthread_descr;
-
-/* Callback interface for removing the thread from waiting on an
-   object if it is cancelled while waiting or about to wait.
-   This hold a pointer to the object, and a pointer to a function
-   which ``extricates'' the thread from its enqueued state.
-   The function takes two arguments: pointer to the wait object,
-   and a pointer to the thread. It returns 1 if an extrication
-   actually occured, and hence the thread must also be signalled.
-   It returns 0 if the thread had already been extricated. */
-
-typedef struct _pthread_extricate_struct {
-    void *pu_object;
-    int (*pu_extricate_func)(void *, pthread_descr);
-} pthread_extricate_if;
-
-/* Atomic counter made possible by compare_and_swap */
-
-struct pthread_atomic {
-  long p_count;
-  int p_spinlock;
-};
-
-/* Context info for read write locks. The pthread_rwlock_info structure
-   is information about a lock that has been read-locked by the thread
-   in whose list this structure appears. The pthread_rwlock_context
-   is embedded in the thread context and contains a pointer to the
-   head of the list of lock info structures, as well as a count of
-   read locks that are untracked, because no info structure could be
-   allocated for them. */
-
-struct _pthread_rwlock_t;
-
-typedef struct _pthread_rwlock_info {
-  struct _pthread_rwlock_info *pr_next;
-  struct _pthread_rwlock_t *pr_lock;
-  int pr_lock_count;
-} pthread_readlock_info;
-
-struct _pthread_descr_struct {
-  union {
-    struct {
-      pthread_descr self;	/* Pointer to this structure */
-    } data;
-    void *__padding[16];
-  } p_header;
-  pthread_descr p_nextlive, p_prevlive;
-                                /* Double chaining of active threads */
-  pthread_descr p_nextwaiting;  /* Next element in the queue holding the thr */
-  pthread_descr p_nextlock;	/* can be on a queue and waiting on a lock */
-  pthread_t p_tid;              /* Thread identifier */
-  int p_pid;                    /* PID of Unix process */
-  int p_priority;               /* Thread priority (== 0 if not realtime) */
-  struct _pthread_fastlock * p_lock; /* Spinlock for synchronized accesses */
-  int p_signal;                 /* last signal received */
-  sigjmp_buf * p_signal_jmp;    /* where to siglongjmp on a signal or NULL */
-  sigjmp_buf * p_cancel_jmp;    /* where to siglongjmp on a cancel or NULL */
-  char p_terminated;            /* true if terminated e.g. by pthread_exit */
-  char p_detached;              /* true if detached */
-  char p_exited;                /* true if the assoc. process terminated */
-  void * p_retval;              /* placeholder for return value */
-  int p_retcode;                /* placeholder for return code */
-  pthread_descr p_joining;      /* thread joining on that thread or NULL */
-  struct _pthread_cleanup_buffer * p_cleanup; /* cleanup functions */
-  char p_cancelstate;           /* cancellation state */
-  char p_canceltype;            /* cancellation type (deferred/async) */
-  char p_canceled;              /* cancellation request pending */
-  struct _reent * p_reentp;     /* pointer to reent struct */
-  struct _reent p_reent;        /* reentrant structure for newlib */
-  int * p_h_errnop;             /* pointer to used h_errno variable */
-  int p_h_errno;                /* error returned by last netdb function */
-  char * p_in_sighandler;       /* stack address of sighandler, or NULL */
-  char p_sigwaiting;            /* true if a sigwait() is in progress */
-  struct pthread_start_args p_start_args; /* arguments for thread creation */
-  void ** p_specific[PTHREAD_KEY_1STLEVEL_SIZE]; /* thread-specific data */
-  void * p_libc_specific[_LIBC_TSD_KEY_N]; /* thread-specific data for libc */
-  int p_userstack;		/* nonzero if the user provided the stack */
-  void *p_guardaddr;		/* address of guard area or NULL */
-  size_t p_guardsize;		/* size of guard area */
-  int p_nr;                     /* Index of descriptor in __pthread_handles */
-  int p_report_events;		/* Nonzero if events must be reported.  */
-  td_eventbuf_t p_eventbuf;     /* Data for event.  */
-  struct pthread_atomic p_resume_count; /* number of times restart() was
-					   called on thread */
-  char p_woken_by_cancel;       /* cancellation performed wakeup */
-  char p_condvar_avail;		/* flag if conditional variable became avail */
-  char p_sem_avail;             /* flag if semaphore became available */
-  pthread_extricate_if *p_extricate; /* See above */
-  pthread_readlock_info *p_readlock_list;  /* List of readlock info structs */
-  pthread_readlock_info *p_readlock_free;  /* Free list of structs */
-  int p_untracked_readlock_count;	/* Readlocks not tracked by list */
-  struct __res_state *p_resp;	/* Pointer to resolver state */
-  struct __res_state p_res;	/* per-thread resolver state */
-  int p_inheritsched;           /* copied from the thread attribute */
-#if HP_TIMING_AVAIL
-  hp_timing_t p_cpuclock_offset; /* Initial CPU clock for thread.  */
-#endif
-  /* New elements must be added at the end.  */
-} __attribute__ ((aligned(32))); /* We need to align the structure so that
-				    doubles are aligned properly.  This is 8
-				    bytes on MIPS and 16 bytes on MIPS64.
-				    32 bytes might give better cache
-				    utilization.  */
-
-
-/* The type of thread handles. */
-
-typedef struct pthread_handle_struct * pthread_handle;
-
-struct pthread_handle_struct {
-  struct _pthread_fastlock h_lock; /* Fast lock for sychronized access */
-  pthread_descr h_descr;        /* Thread descriptor or NULL if invalid */
-  char * h_bottom;              /* Lowest address in the stack thread */
-};
-
-/* The type of messages sent to the thread manager thread */
-
-struct pthread_request {
-  pthread_descr req_thread;     /* Thread doing the request */
-  enum {                        /* Request kind */
-    REQ_CREATE, REQ_FREE, REQ_PROCESS_EXIT, REQ_MAIN_THREAD_EXIT,
-    REQ_POST, REQ_DEBUG, REQ_KICK, REQ_FOR_EACH_THREAD
-  } req_kind;
-  union {                       /* Arguments for request */
-    struct {                    /* For REQ_CREATE: */
-      const pthread_attr_t * attr; /* thread attributes */
-      void * (*fn)(void *);     /*   start function */
-      void * arg;               /*   argument to start function */
-      sigset_t mask;            /*   signal mask */
-    } create;
-    struct {                    /* For REQ_FREE: */
-      pthread_t thread_id;      /*   identifier of thread to free */
-    } free;
-    struct {                    /* For REQ_PROCESS_EXIT: */
-      int code;                 /*   exit status */
-    } exit;
-    void * post;                /* For REQ_POST: the semaphore */
-    struct {			/* For REQ_FOR_EACH_THREAD: callback */
-      void (*fn)(void *, pthread_descr);
-      void *arg;
-    } for_each;
-  } req_args;
-};
-
-
-/* Signals used for suspend/restart and for cancellation notification.  */
-
-extern int __pthread_sig_restart;
-extern int __pthread_sig_cancel;
-
-/* Signal used for interfacing with gdb */
-
-extern int __pthread_sig_debug;
-
-/* Global array of thread handles, used for validating a thread id
-   and retrieving the corresponding thread descriptor. Also used for
-   mapping the available stack segments. */
-
-extern struct pthread_handle_struct __pthread_handles[PTHREAD_THREADS_MAX];
-
-/* Descriptor of the initial thread */
-
-extern struct _pthread_descr_struct __pthread_initial_thread;
-
-/* Descriptor of the manager thread */
-
-extern struct _pthread_descr_struct __pthread_manager_thread;
-
-/* Descriptor of the main thread */
-
-extern pthread_descr __pthread_main_thread;
-
-/* Limit between the stack of the initial thread (above) and the
-   stacks of other threads (below). Aligned on a STACK_SIZE boundary.
-   Initially 0, meaning that the current thread is (by definition)
-   the initial thread. */
-
-extern char *__pthread_initial_thread_bos;
-
-/* Indicate whether at least one thread has a user-defined stack (if 1),
-   or all threads have stacks supplied by LinuxThreads (if 0). */
-
-extern int __pthread_nonstandard_stacks;
-
-/* File descriptor for sending requests to the thread manager.
-   Initially -1, meaning that __pthread_initialize_manager must be called. */
-
-extern int __pthread_manager_request;
-
-/* Other end of the pipe for sending requests to the thread manager. */
-
-extern int __pthread_manager_reader;
-
-/* Limits of the thread manager stack. */
-
-extern char *__pthread_manager_thread_bos;
-extern char *__pthread_manager_thread_tos;
-
-#ifdef FLOATING_STACKS
-/* Maximum stack size.  */
-extern size_t __pthread_max_stacksize;
-#endif
-
-/* Pending request for a process-wide exit */
-
-extern int __pthread_exit_requested, __pthread_exit_code;
-
-/* Set to 1 by gdb if we're debugging */
-
-extern volatile int __pthread_threads_debug;
-
-/* Globally enabled events.  */
-extern volatile td_thr_events_t __pthread_threads_events;
-
-/* Pointer to descriptor of thread with last event.  */
-extern volatile pthread_descr __pthread_last_event;
-
-/* Flag which tells whether we are executing on SMP kernel. */
-extern int __pthread_smp_kernel;
-
-/* Return the handle corresponding to a thread id */
-
-static inline pthread_handle thread_handle(pthread_t id)
-{
-  return &__pthread_handles[id % PTHREAD_THREADS_MAX];
-}
-
-/* Validate a thread handle. Must have acquired h->h_spinlock before. */
-
-static inline int invalid_handle(pthread_handle h, pthread_t id)
-{
-  return h->h_descr == NULL || h->h_descr->p_tid != id || h->h_descr->p_terminated;
-}
-
-static inline int nonexisting_handle(pthread_handle h, pthread_t id)
-{
-  return h->h_descr == NULL || h->h_descr->p_tid != id;
-}
-
-/* Fill in defaults left unspecified by pt-machine.h.  */
-
-/* We round up a value with page size. */
-#ifndef page_roundup
-#define page_roundup(v,p) ((((size_t) (v)) + (p) - 1) & ~((p) - 1))
-#endif
-
-/* The page size we can get from the system.  This should likely not be
-   changed by the machine file but, you never know.  */
-#ifndef PAGE_SIZE
-#define PAGE_SIZE  (sysconf (_SC_PAGE_SIZE))
-#endif
-
-/* The max size of the thread stack segments.  If the default
-   THREAD_SELF implementation is used, this must be a power of two and
-   a multiple of PAGE_SIZE.  */
-#ifndef STACK_SIZE
-#define STACK_SIZE  (2 * 1024 * 1024)
-#endif
-
-/* The initial size of the thread stack.  Must be a multiple of PAGE_SIZE.  */
-#ifndef INITIAL_STACK_SIZE
-#define INITIAL_STACK_SIZE  (4 * PAGE_SIZE)
-#endif
-
-/* Size of the thread manager stack. The "- 32" avoids wasting space
-   with some malloc() implementations. */
-#ifndef THREAD_MANAGER_STACK_SIZE
-#define THREAD_MANAGER_STACK_SIZE  (2 * PAGE_SIZE - 32)
-#endif
-
-/* The base of the "array" of thread stacks.  The array will grow down from
-   here.  Defaults to the calculated bottom of the initial application
-   stack.  */
-#ifndef THREAD_STACK_START_ADDRESS
-#define THREAD_STACK_START_ADDRESS  __pthread_initial_thread_bos
-#endif
-
-/* Get some notion of the current stack.  Need not be exactly the top
-   of the stack, just something somewhere in the current frame.  */
-#ifndef CURRENT_STACK_FRAME
-#define CURRENT_STACK_FRAME  ({ char __csf; &__csf; })
-#endif
-
-/* Recover thread descriptor for the current thread */
-
-extern pthread_descr __pthread_find_self (void) __attribute__ ((const));
-
-static inline pthread_descr thread_self (void) __attribute__ ((const));
-static inline pthread_descr thread_self (void)
-{
-#ifdef THREAD_SELF
-  return THREAD_SELF;
-#else
-  char *sp = CURRENT_STACK_FRAME;
-  if (sp >= __pthread_initial_thread_bos)
-    return &__pthread_initial_thread;
-  else if (sp >= __pthread_manager_thread_bos
-	   && sp < __pthread_manager_thread_tos)
-    return &__pthread_manager_thread;
-  else if (__pthread_nonstandard_stacks)
-    return __pthread_find_self();
-  else
-#ifdef _STACK_GROWS_DOWN
-    return (pthread_descr)(((unsigned long)sp | (STACK_SIZE-1))+1) - 1;
-#else
-    return (pthread_descr)((unsigned long)sp &~ (STACK_SIZE-1));
-#endif
-#endif
-}
-
-/* If MEMORY_BARRIER isn't defined in pt-machine.h, assume the architecture
-   doesn't need a memory barrier instruction (e.g. Intel x86).  Still we
-   need the compiler to respect the barrier and emit all outstanding
-   operations which modify memory.  Some architectures distinguish between
-   full, read and write barriers.  */
-
-#ifndef MEMORY_BARRIER
-#define MEMORY_BARRIER() asm ("" : : : "memory")
-#endif
-#ifndef READ_MEMORY_BARRIER
-#define READ_MEMORY_BARRIER() MEMORY_BARRIER()
-#endif
-#ifndef WRITE_MEMORY_BARRIER
-#define WRITE_MEMORY_BARRIER() MEMORY_BARRIER()
-#endif
-
-/* Max number of times we must spin on a spinlock calling sched_yield().
-   After MAX_SPIN_COUNT iterations, we put the calling thread to sleep. */
-
-#ifndef MAX_SPIN_COUNT
-#define MAX_SPIN_COUNT 50
-#endif
-
-/* Max number of times the spinlock in the adaptive mutex implementation
-   spins actively on SMP systems.  */
-
-#ifndef MAX_ADAPTIVE_SPIN_COUNT
-#define MAX_ADAPTIVE_SPIN_COUNT 100
-#endif
-
-/* Duration of sleep (in nanoseconds) when we can't acquire a spinlock
-   after MAX_SPIN_COUNT iterations of sched_yield().
-   With the 2.0 and 2.1 kernels, this MUST BE > 2ms.
-   (Otherwise the kernel does busy-waiting for realtime threads,
-    giving other threads no chance to run.) */
-
-#ifndef SPIN_SLEEP_DURATION
-#define SPIN_SLEEP_DURATION 2000001
-#endif
-
-/* Debugging */
-
-#ifdef DEBUG
-#include <assert.h>
-#define ASSERT assert
-#define MSG __pthread_message
-#else
-#define ASSERT(x)
-#define MSG(msg,arg...)
-#endif
-
-/* Internal global functions */
-
-extern void __pthread_do_exit (void *retval, char *currentframe)
-     __attribute__ ((__noreturn__));
-extern void __pthread_destroy_specifics (void);
-extern void __pthread_perform_cleanup (char *currentframe);
-extern void __pthread_init_max_stacksize (void);
-extern int __pthread_initialize_manager (void);
-extern void __pthread_message (char * fmt, ...);
-extern int __pthread_manager (void *reqfd);
-extern int __pthread_manager_event (void *reqfd);
-extern void __pthread_manager_sighandler (int sig);
-extern void __pthread_reset_main_thread (void);
-extern void __pthread_once_fork_prepare (void);
-extern void __pthread_once_fork_parent (void);
-extern void __pthread_once_fork_child (void);
-extern void __flockfilelist (void);
-extern void __funlockfilelist (void);
-extern void __fresetlockfiles (void);
-extern void __pthread_manager_adjust_prio (int thread_prio);
-extern void __pthread_initialize_minimal (void);
-
-extern int __pthread_attr_setguardsize (pthread_attr_t *__attr,
-					size_t __guardsize);
-extern int __pthread_attr_getguardsize (const pthread_attr_t *__attr,
-					size_t *__guardsize);
-extern int __pthread_attr_setstackaddr (pthread_attr_t *__attr,
-					void *__stackaddr);
-extern int __pthread_attr_getstackaddr (const pthread_attr_t *__attr,
-					void **__stackaddr);
-extern int __pthread_attr_setstacksize (pthread_attr_t *__attr,
-					size_t __stacksize);
-extern int __pthread_attr_getstacksize (const pthread_attr_t *__attr,
-					size_t *__stacksize);
-extern int __pthread_attr_setstack (pthread_attr_t *__attr, void *__stackaddr,
-				    size_t __stacksize);
-extern int __pthread_attr_getstack (const pthread_attr_t *__attr, void **__stackaddr,
-				    size_t *__stacksize);
-extern int __pthread_getconcurrency (void);
-extern int __pthread_setconcurrency (int __level);
-extern int __pthread_mutex_timedlock (pthread_mutex_t *__mutex,
-				      const struct timespec *__abstime);
-extern int __pthread_mutexattr_getpshared (const pthread_mutexattr_t *__attr,
-					   int *__pshared);
-extern int __pthread_mutexattr_setpshared (pthread_mutexattr_t *__attr,
-					   int __pshared);
-extern int __pthread_mutexattr_gettype (const pthread_mutexattr_t *__attr,
-					int *__kind);
-extern void __pthread_kill_other_threads_np (void);
-
-extern void __pthread_restart_old(pthread_descr th);
-extern void __pthread_suspend_old(pthread_descr self);
-extern int __pthread_timedsuspend_old(pthread_descr self, const struct timespec *abs);
-
-extern void __pthread_restart_new(pthread_descr th);
-extern void __pthread_suspend_new(pthread_descr self);
-extern int __pthread_timedsuspend_new(pthread_descr self, const struct timespec *abs);
-
-extern void __pthread_wait_for_restart_signal(pthread_descr self);
-
-extern int __pthread_yield (void);
-
-extern int __pthread_rwlock_timedrdlock (pthread_rwlock_t *__restrict __rwlock,
-					 __const struct timespec *__restrict
-					 __abstime);
-extern int __pthread_rwlock_timedwrlock (pthread_rwlock_t *__restrict __rwlock,
-					 __const struct timespec *__restrict
-					 __abstime);
-extern int __pthread_rwlockattr_destroy (pthread_rwlockattr_t *__attr);
-
-extern int __pthread_barrierattr_getpshared (__const pthread_barrierattr_t *
-					     __restrict __attr,
-					     int *__restrict __pshared);
-
-extern int __pthread_spin_lock (pthread_spinlock_t *__lock);
-extern int __pthread_spin_trylock (pthread_spinlock_t *__lock);
-extern int __pthread_spin_unlock (pthread_spinlock_t *__lock);
-extern int __pthread_spin_init (pthread_spinlock_t *__lock, int __pshared);
-extern int __pthread_spin_destroy (pthread_spinlock_t *__lock);
-
-extern int __pthread_clock_gettime (hp_timing_t freq, struct timespec *tp);
-extern void __pthread_clock_settime (hp_timing_t offset);
-
-
-/* Global pointers to old or new suspend functions */
-
-extern void (*__pthread_restart)(pthread_descr);
-extern void (*__pthread_suspend)(pthread_descr);
-extern int (*__pthread_timedsuspend)(pthread_descr, const struct timespec *);
-
-/* Prototypes for the function without cancelation support when the
-   normal version has it.  */
-extern int __libc_close (int fd);
-extern int __libc_nanosleep (const struct timespec *requested_time,
-			     struct timespec *remaining);
-/* Prototypes for some of the new semaphore functions.  */
-extern int __new_sem_post (sem_t * sem);
-extern int __new_sem_init (sem_t *__sem, int __pshared, unsigned int __value);
-extern int __new_sem_wait (sem_t *__sem);
-extern int __new_sem_trywait (sem_t *__sem);
-extern int __new_sem_getvalue (sem_t *__restrict __sem, int *__restrict __sval);
-extern int __new_sem_destroy (sem_t *__sem);
-
-/* Prototypes for compatibility functions.  */
-extern int __pthread_attr_init_2_1 (pthread_attr_t *__attr);
-extern int __pthread_attr_init_2_0 (pthread_attr_t *__attr);
-extern int __pthread_create_2_1 (pthread_t *__restrict __thread1,
-				 const pthread_attr_t *__attr,
-				 void *(*__start_routine) (void *),
-				 void *__restrict __arg);
-extern int __pthread_create_2_0 (pthread_t *__restrict __thread1,
-				 const pthread_attr_t *__attr,
-				 void *(*__start_routine) (void *),
-				 void *__restrict arg);
-
-/* The functions called the signal events.  */
-extern void __linuxthreads_create_event (void);
-extern void __linuxthreads_death_event (void);
-extern void __linuxthreads_reap_event (void);
-
-/* This function is called to initialize the pthread library.  */
-extern void __pthread_initialize (void);
-
-#endif /* internals.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/join.c b/newlib/libc/sys/linux/linuxthreads/join.c
deleted file mode 100644
index a6ed08c97..000000000
--- a/newlib/libc/sys/linux/linuxthreads/join.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Thread termination and joining */
-
-#include <errno.h>
-#include <sched.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-
-void pthread_exit(void * retval)
-{
-  __pthread_do_exit (retval, CURRENT_STACK_FRAME);
-}
-
-void __pthread_do_exit(void *retval, char *currentframe)
-{
-  pthread_descr self = thread_self();
-  pthread_descr joining;
-  struct pthread_request request;
-
-  /* Reset the cancellation flag to avoid looping if the cleanup handlers
-     contain cancellation points */
-  THREAD_SETMEM(self, p_canceled, 0);
-  /* Call cleanup functions and destroy the thread-specific data */
-  __pthread_perform_cleanup(currentframe);
-  __pthread_destroy_specifics();
-  /* Store return value */
-  __pthread_lock(THREAD_GETMEM(self, p_lock), self);
-  THREAD_SETMEM(self, p_retval, retval);
-  /* See whether we have to signal the death.  */
-  if (THREAD_GETMEM(self, p_report_events))
-    {
-      /* See whether TD_DEATH is in any of the mask.  */
-      int idx = __td_eventword (TD_DEATH);
-      uint32_t mask = __td_eventmask (TD_DEATH);
-
-      if ((mask & (__pthread_threads_events.event_bits[idx]
-		   | THREAD_GETMEM_NC(self,
-				      p_eventbuf.eventmask.event_bits[idx])))
-	  != 0)
-	{
-	  /* Yep, we have to signal the death.  */
-	  THREAD_SETMEM(self, p_eventbuf.eventnum, TD_DEATH);
-	  THREAD_SETMEM(self, p_eventbuf.eventdata, self);
-	  __pthread_last_event = self;
-
-	  /* Now call the function to signal the event.  */
-	  __linuxthreads_death_event();
-	}
-    }
-  /* Say that we've terminated */
-  THREAD_SETMEM(self, p_terminated, 1);
-  /* See if someone is joining on us */
-  joining = THREAD_GETMEM(self, p_joining);
-  __pthread_unlock(THREAD_GETMEM(self, p_lock));
-  /* Restart joining thread if any */
-  if (joining != NULL) restart(joining);
-  /* If this is the initial thread, block until all threads have terminated.
-     If another thread calls exit, we'll be terminated from our signal
-     handler. */
-  if (self == __pthread_main_thread && __pthread_manager_request >= 0) {
-    request.req_thread = self;
-    request.req_kind = REQ_MAIN_THREAD_EXIT;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *)&request, sizeof(request)));
-    suspend(self);
-    /* Main thread flushes stdio streams and runs atexit functions.
-       It also calls a handler within LinuxThreads which sends a process exit
-       request to the thread manager. */
-    exit(0);
-  }
-  /* Threads other than the main one  terminate without flushing stdio streams
-     or running atexit functions. */
-  _exit(0);
-}
-
-/* Function called by pthread_cancel to remove the thread from
-   waiting on a condition variable queue. */
-
-static int join_extricate_func(void *obj, pthread_descr th)
-{
-  volatile pthread_descr self = thread_self();
-  pthread_handle handle = obj;
-  pthread_descr jo;
-  int did_remove = 0;
-
-  __pthread_lock(&handle->h_lock, self);
-  jo = handle->h_descr;
-  did_remove = jo->p_joining != NULL;
-  jo->p_joining = NULL;
-  __pthread_unlock(&handle->h_lock);
-
-  return did_remove;
-}
-
-int pthread_join(pthread_t thread_id, void ** thread_return)
-{
-  volatile pthread_descr self = thread_self();
-  struct pthread_request request;
-  pthread_handle handle = thread_handle(thread_id);
-  pthread_descr th;
-  pthread_extricate_if extr;
-  int already_canceled = 0;
-
-  /* Set up extrication interface */
-  extr.pu_object = handle;
-  extr.pu_extricate_func = join_extricate_func;
-
-  __pthread_lock(&handle->h_lock, self);
-  if (nonexisting_handle(handle, thread_id)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-  th = handle->h_descr;
-  if (th == self) {
-    __pthread_unlock(&handle->h_lock);
-    return EDEADLK;
-  }
-  /* If detached or already joined, error */
-  if (th->p_detached || th->p_joining != NULL) {
-    __pthread_unlock(&handle->h_lock);
-    return EINVAL;
-  }
-  /* If not terminated yet, suspend ourselves. */
-  if (! th->p_terminated) {
-    /* Register extrication interface */
-    __pthread_set_own_extricate_if(self, &extr);
-    if (!(THREAD_GETMEM(self, p_canceled)
-	&& THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE))
-      th->p_joining = self;
-    else
-      already_canceled = 1;
-    __pthread_unlock(&handle->h_lock);
-
-    if (already_canceled) {
-      __pthread_set_own_extricate_if(self, 0);
-      __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-    }
-
-    suspend(self);
-    /* Deregister extrication interface */
-    __pthread_set_own_extricate_if(self, 0);
-
-    /* This is a cancellation point */
-    if (THREAD_GETMEM(self, p_woken_by_cancel)
-	&& THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-      THREAD_SETMEM(self, p_woken_by_cancel, 0);
-      __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-    }
-    __pthread_lock(&handle->h_lock, self);
-  }
-  /* Get return value */
-  if (thread_return != NULL) *thread_return = th->p_retval;
-  __pthread_unlock(&handle->h_lock);
-  /* Send notification to thread manager */
-  if (__pthread_manager_request >= 0) {
-    request.req_thread = self;
-    request.req_kind = REQ_FREE;
-    request.req_args.free.thread_id = thread_id;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-  }
-  return 0;
-}
-
-int pthread_detach(pthread_t thread_id)
-{
-  int terminated;
-  struct pthread_request request;
-  pthread_handle handle = thread_handle(thread_id);
-  pthread_descr th;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (nonexisting_handle(handle, thread_id)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-  th = handle->h_descr;
-  /* If already detached, error */
-  if (th->p_detached) {
-    __pthread_unlock(&handle->h_lock);
-    return EINVAL;
-  }
-  /* If already joining, don't do anything. */
-  if (th->p_joining != NULL) {
-    __pthread_unlock(&handle->h_lock);
-    return 0;
-  }
-  /* Mark as detached */
-  th->p_detached = 1;
-  terminated = th->p_terminated;
-  __pthread_unlock(&handle->h_lock);
-  /* If already terminated, notify thread manager to reclaim resources */
-  if (terminated && __pthread_manager_request >= 0) {
-    request.req_thread = thread_self();
-    request.req_kind = REQ_FREE;
-    request.req_args.free.thread_id = thread_id;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-  }
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/joinrace.c b/newlib/libc/sys/linux/linuxthreads/joinrace.c
deleted file mode 100644
index 8e1064c98..000000000
--- a/newlib/libc/sys/linux/linuxthreads/joinrace.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Test case by Permaine Cheung <pcheung@cygnus.com>.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-static void *
-sub1 (void *arg)
-{
-  /* Nothing.  */
-  return NULL;
-}
-
-int
-main (void)
-{
-  int istatus;
-  int policy;
-  int cnt;
-  pthread_t thread1;
-  struct sched_param spresult1, sp1;
-
-  for (cnt = 0; cnt < 100; ++cnt)
-    {
-      printf ("Round %d\n", cnt);
-
-      pthread_create (&thread1, NULL, &sub1, NULL);
-      pthread_join (thread1, NULL);
-
-      istatus = pthread_getschedparam (thread1, &policy, &spresult1);
-      if (istatus != ESRCH)
-	{
-	  printf ("pthread_getschedparam returns: %d\n", istatus);
-	  return 1;
-	}
-
-      sp1.sched_priority = 0;
-      istatus = pthread_setschedparam (thread1, SCHED_OTHER, &sp1);
-      if (istatus != ESRCH)
-	{
-	  printf ("pthread_setschedparam returns: %d\n", istatus);
-	  return 2;
-	}
-    }
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/kernel-features.h b/newlib/libc/sys/linux/linuxthreads/kernel-features.h
deleted file mode 100644
index 562a6c765..000000000
--- a/newlib/libc/sys/linux/linuxthreads/kernel-features.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* Set flags signalling availability of kernel features based on given
-   kernel version number.
-   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file must not contain any C code.  At least it must be protected
-   to allow using the file also in assembler files.  */
-
-#ifndef __LINUX_KERNEL_VERSION
-/* We assume the worst; all kernels should be supported.  */
-# define __LINUX_KERNEL_VERSION	0
-#endif
-
-/* We assume for __LINUX_KERNEL_VERSION the same encoding used in
-   linux/version.h.  I.e., the major, minor, and subminor all get a
-   byte with the major number being in the highest byte.  This means
-   we can do numeric comparisons.
-
-   In the following we will define certain symbols depending on
-   whether the describes kernel feature is available in the kernel
-   version given by __LINUX_KERNEL_VERSION.  We are not always exactly
-   recording the correct versions in which the features were
-   introduced.  If somebody cares these values can afterwards be
-   corrected.  Most of the numbers here are set corresponding to
-   2.2.0.  */
-
-/* `getcwd' system call.  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_GETCWD_SYSCALL	1
-#endif
-
-/* Real-time signal became usable in 2.1.70.  */
-#if __LINUX_KERNEL_VERSION >= 131398
-# define __ASSUME_REALTIME_SIGNALS	1
-#endif
-
-/* When were the `pread'/`pwrite' syscalls introduced?  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_PREAD_SYSCALL		1
-# define __ASSUME_PWRITE_SYSCALL	1
-#endif
-
-/* When was `poll' introduced?  */
-#if __LINUX_KERNEL_VERSION >= 131584
-# define __ASSUME_POLL_SYSCALL		1
-#endif
-
-/* The `lchown' syscall was introduced in 2.1.80.  */
-#if __LINUX_KERNEL_VERSION >= 131408
-# define __ASSUME_LCHOWN_SYSCALL	1
-#endif
-
-/* When did the `setresuid' sysall became available?  */
-#if __LINUX_KERNEL_VERSION >= 131584 && !defined __sparc__
-# define __ASSUME_SETRESUID_SYSCALL	1
-#endif
-
-/* The SIOCGIFNAME ioctl is available starting with 2.1.50.  */
-#if __LINUX_KERNEL_VERSION >= 131408
-# define __ASSUME_SIOCGIFNAME		1
-#endif
-
-/* On x86 another `getrlimit' syscall was added in 2.3.25.  */
-#if __LINUX_KERNEL_VERSION >= 131865 && defined __i386__
-# define __ASSUME_NEW_GETRLIMIT_SYSCALL	1
-#endif
-
-/* On x86 the truncate64/ftruncate64 syscalls were introduced in 2.3.31.  */
-#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-#endif
-
-/* On x86 the mmap2 syscall was introduced in 2.3.31.  */
-#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__
-# define __ASSUME_MMAP2_SYSCALL	1
-#endif
-
-/* On x86 the stat64/lstat64/fstat64 syscalls were introduced in 2.3.34.  */
-#if __LINUX_KERNEL_VERSION >= 131874 && defined __i386__
-# define __ASSUME_STAT64_SYSCALL	1
-#endif
-
-/* On sparc and ARM the truncate64/ftruncate64/mmap2/stat64/lstat64/fstat64
-   syscalls were introduced in 2.3.35.  */
-#if __LINUX_KERNEL_VERSION >= 131875 && (defined __sparc__ || defined __arm__)
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_MMAP2_SYSCALL		1
-# define __ASSUME_STAT64_SYSCALL	1
-#endif
-
-/* I know for sure that these are in 2.3.35 on powerpc.  */
-#if __LINUX_KERNEL_VERSION >= 131875 && defined __powerpc__
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_STAT64_SYSCALL	1
-# define __ASSUME_NEW_GETRLIMIT_SYSCALL	1
-#endif
-
-/* Linux 2.3.39 introduced 32bit UID/GIDs and IPC64.  Some platforms had 32
-   bit type all along.  */
-#if __LINUX_KERNEL_VERSION >= 131879 || defined __powerpc__ || defined __mips__
-# define __ASSUME_32BITUIDS		1
-# ifndef __powerpc__
-#  define __ASSUME_IPC64		1
-# endif
-# ifdef __sparc__
-#  define __ASSUME_SETRESUID_SYSCALL	1
-# endif
-#endif
-
-/* Linux 2.4.0 on PPC introduced a correct IPC64.  */
-#if __LINUX_KERNEL_VERSION >= 132096 && defined __powerpc__
-# define __ASSUME_IPC64			1
-#endif
-
-/* We can use the LDTs for threading with Linux 2.3.99 and newer.  */
-#if __LINUX_KERNEL_VERSION >= 131939
-# define __ASSUME_LDT_WORKS		1
-#endif
-
-/* The changed st_ino field appeared in 2.4.0-test6.  But we cannot
-   distinguish this version from other 2.4.0 releases.  Therefore play
-   save and assume it available is for 2.4.1 and up.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_ST_INO_64_BIT		1
-#endif
-
-/* To support locking of large files a new fcntl() syscall was introduced
-   in 2.4.0-test7.  We test for 2.4.1 for the earliest version we know
-   the syscall is available.  */
-#if __LINUX_KERNEL_VERSION >= 132097 && (defined __i386__ || defined __sparc__)
-# define __ASSUME_FCNTL64		1
-#endif
-
-/* Arm got fcntl64 in 2.4.4, PowerPC and SH have it also in 2.4.4 (I
-   don't know when it got introduced).  */
-#if __LINUX_KERNEL_VERSION >= 132100 \
-    && (defined __arm__ || defined __powerpc__ || defined __sh__)
-# define __ASSUME_FCNTL64		1
-#endif
-
-/* The getdents64 syscall was introduced in 2.4.0-test7.  We test for
-   2.4.1 for the earliest version we know the syscall is available.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_GETDENTS64_SYSCALL	1
-#endif
-
-/* When did O_DIRECTORY became available?  Early in 2.3 but when?
-   Be safe, use 2.3.99.  */
-#if __LINUX_KERNEL_VERSION >= 131939
-# define __ASSUME_O_DIRECTORY		1
-#endif
-
-/* Starting with one of the 2.4.0 pre-releases the Linux kernel passes
-   up the page size information.  */
-#if __LINUX_KERNEL_VERSION >= 132097
-# define __ASSUME_AT_PAGESIZE		1
-#endif
-
-/* Starting with 2.4.5 kernels PPC passes the AUXV in the standard way
-   and the mmap2 syscall made it into the official kernel.  */
-#if __LINUX_KERNEL_VERSION >= (132096+5) && defined __powerpc__
-# define __ASSUME_STD_AUXV		1
-# define __ASSUME_MMAP2_SYSCALL		1
-#endif
-
-/* There are an infinite number of PA-RISC kernel versions numbered
-   2.4.0.  But they've not really been released as such.  We require
-   and expect the final version here.  */
-#ifdef __hppa__
-# define __ASSUME_32BITUIDS		1
-# define __ASSUME_TRUNCATE64_SYSCALL	1
-# define __ASSUME_MMAP2_SYSCALL		1
-# define __ASSUME_STAT64_SYSCALL	1
-# define __ASSUME_IPC64			1
-# define __ASSUME_ST_INO_64_BIT		1
-# define __ASSUME_FCNTL64		1
-# define __ASSUME_GETDENTS64_SYSCALL	1
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/libc-internal.h b/newlib/libc/sys/linux/linuxthreads/libc-internal.h
deleted file mode 100644
index 8369ffec2..000000000
--- a/newlib/libc/sys/linux/linuxthreads/libc-internal.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* This file contains a number of internal prototype declarations that
-   don't fit anywhere else.  */
-
-#ifndef _LIBC_INTERNAL
-# define _LIBC_INTERNAL 1
-
-#include <hp-timing.h>
-
-/* Initialize the `__libc_enable_secure' flag.  */
-extern void __libc_init_secure (void);
-
-/* This function will be called from _init in init-first.c.  */
-extern void __libc_global_ctors (void);
-
-/* Discover the tick frequency of the machine if something goes wrong,
-   we return 0, an impossible hertz.  */
-extern int __profile_frequency (void);
-
-/* Hooks for the instrumenting functions.  */
-extern void __cyg_profile_func_enter (void *this_fn, void *call_site);
-extern void __cyg_profile_func_exit (void *this_fn, void *call_site);
-
-/* Get frequency of the system processor.  */
-extern hp_timing_t __get_clockfreq (void);
-
-/* Free all allocated resources.  */
-extern void __libc_freeres (void);
-
-#endif /* _LIBC_INTERNAL  */
diff --git a/newlib/libc/sys/linux/linuxthreads/libc-symbols.h b/newlib/libc/sys/linux/linuxthreads/libc-symbols.h
deleted file mode 100644
index 97b672643..000000000
--- a/newlib/libc/sys/linux/linuxthreads/libc-symbols.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/* Support macros for making weak and strong aliases for symbols,
-   and for using symbol sets and linker warnings with GNU ld.
-   Copyright (C) 1995,1996,1997,1998,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LIBC_SYMBOLS_H
-#define _LIBC_SYMBOLS_H	1
-
-/* This file's macros are included implicitly in the compilation of every
-   file in the C library by -imacros.
-
-   We include config.h which is generated by configure.
-   It should define for us the following symbols:
-
-   * HAVE_ASM_SET_DIRECTIVE if we have `.set B, A' instead of `A = B'.
-   * ASM_GLOBAL_DIRECTIVE with `.globl' or `.global'.
-   * HAVE_GNU_LD if using GNU ld, with support for weak symbols in a.out,
-   and for symbol set and warning messages extensions in a.out and ELF.
-   * HAVE_ELF if using ELF, which supports weak symbols using `.weak'.
-   * HAVE_ASM_WEAK_DIRECTIVE if we have weak symbols using `.weak'.
-   * HAVE_ASM_WEAKEXT_DIRECTIVE if we have weak symbols using `.weakext'.
-
-   */
-
-/* This is defined for the compilation of all C library code.  features.h
-   tests this to avoid inclusion of stubs.h while compiling the library,
-   before stubs.h has been generated.  Some library code that is shared
-   with other packages also tests this symbol to see if it is being
-   compiled as part of the C library.  We must define this before including
-   config.h, because it makes some definitions conditional on whether libc
-   itself is being compiled, or just some generator program.  */
-#define _LIBC	1
-
-/* Enable declarations of GNU extensions, since we are compiling them.  */
-#define _GNU_SOURCE	1
-/* And we also need the data for the reentrant functions.  */
-#define _REENTRANT	1
-
-#include <config.h>
-
-/* The symbols in all the user (non-_) macros are C symbols.
-   HAVE_GNU_LD without HAVE_ELF implies a.out.  */
-
-#if defined HAVE_ASM_WEAK_DIRECTIVE || defined HAVE_ASM_WEAKEXT_DIRECTIVE
-# define HAVE_WEAK_SYMBOLS
-#endif
-
-#ifndef __SYMBOL_PREFIX
-# ifdef NO_UNDERSCORES
-#  define __SYMBOL_PREFIX
-# else
-#  define __SYMBOL_PREFIX "_"
-# endif
-#endif
-
-#ifndef C_SYMBOL_NAME
-# ifdef NO_UNDERSCORES
-#  define C_SYMBOL_NAME(name) name
-# else
-#  define C_SYMBOL_NAME(name) _##name
-# endif
-#endif
-
-#ifndef ASM_LINE_SEP
-# define ASM_LINE_SEP ;
-#endif
-
-#ifndef C_SYMBOL_DOT_NAME
-# define C_SYMBOL_DOT_NAME(name) .##name
-#endif
-
-#ifndef __ASSEMBLER__
-/* GCC understands weak symbols and aliases; use its interface where
-   possible, instead of embedded assembly language.  */
-
-/* Define ALIASNAME as a strong alias for NAME.  */
-# define strong_alias(name, aliasname) _strong_alias(name, aliasname)
-# define _strong_alias(name, aliasname) \
-  extern __typeof (name) aliasname __attribute__ ((alias (#name)));
-
-/* This comes between the return type and function name in
-   a function definition to make that definition weak.  */
-# define weak_function __attribute__ ((weak))
-# define weak_const_function __attribute__ ((weak, __const__))
-
-# ifdef HAVE_WEAK_SYMBOLS
-
-/* Define ALIASNAME as a weak alias for NAME.
-   If weak aliases are not available, this defines a strong alias.  */
-#  define weak_alias(name, aliasname) _weak_alias (name, aliasname)
-#  define _weak_alias(name, aliasname) \
-  extern __typeof (name) aliasname __attribute__ ((weak, alias (#name)));
-
-/* Declare SYMBOL as weak undefined symbol (resolved to 0 if not defined).  */
-#  define weak_extern(symbol) _weak_extern (symbol)
-#  ifdef HAVE_ASM_WEAKEXT_DIRECTIVE
-#   define _weak_extern(symbol) asm (".weakext " __SYMBOL_PREFIX #symbol);
-#  else
-#   define _weak_extern(symbol)    asm (".weak " __SYMBOL_PREFIX #symbol);
-#  endif
-
-# else
-
-#  define weak_alias(name, aliasname) strong_alias(name, aliasname)
-#  define weak_extern(symbol) /* Nothing. */
-
-# endif
-
-#else /* __ASSEMBLER__ */
-
-# ifdef HAVE_ASM_SET_DIRECTIVE
-#  define strong_alias(original, alias)		\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  .set C_SYMBOL_NAME (alias),C_SYMBOL_NAME (original)
-# else
-#  ifdef HAVE_ASM_GLOBAL_DOT_NAME
-#   define strong_alias(original, alias)	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original) ASM_LINE_SEP	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_DOT_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_DOT_NAME (alias) = C_SYMBOL_DOT_NAME (original)
-#  else
-#   define strong_alias(original, alias)	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original)
-#  endif
-# endif
-
-# ifdef HAVE_WEAK_SYMBOLS
-#  ifdef HAVE_ASM_WEAKEXT_DIRECTIVE
-#   define weak_alias(original, alias)	\
-  .weakext C_SYMBOL_NAME (alias), C_SYMBOL_NAME (original)
-#   define weak_extern(symbol)	\
-  .weakext C_SYMBOL_NAME (symbol)
-
-#  else /* ! HAVE_ASM_WEAKEXT_DIRECTIVE */
-
-#   ifdef HAVE_ASM_GLOBAL_DOT_NAME
-#    define weak_alias(original, alias)	\
-  .weak C_SYMBOL_NAME (alias) ASM_LINE_SEP			\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original) ASM_LINE_SEP	\
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_DOT_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_DOT_NAME (alias) = C_SYMBOL_DOT_NAME (original)
-#   else
-#    define weak_alias(original, alias)	\
-  .weak C_SYMBOL_NAME (alias) ASM_LINE_SEP	\
-  C_SYMBOL_NAME (alias) = C_SYMBOL_NAME (original)
-#   endif
-
-#   define weak_extern(symbol)	\
-  .weak C_SYMBOL_NAME (symbol)
-
-#  endif /* ! HAVE_ASM_WEAKEXT_DIRECTIVE */
-
-# else /* ! HAVE_WEAK_SYMBOLS */
-
-#  define weak_alias(original, alias) strong_alias(original, alias)
-#  define weak_extern(symbol) /* Nothing */
-# endif /* ! HAVE_WEAK_SYMBOLS */
-
-#endif /* __ASSEMBLER__ */
-
-/* On some platforms we can make internal function calls (i.e., calls of
-   functions not exported) a bit faster by using a different calling
-   convention.  */
-#ifndef internal_function
-# define internal_function	/* empty */
-#endif
-
-/* Prepare for the case that `__builtin_expect' is not available.  */
-#ifndef HAVE_BUILTIN_EXPECT
-# define __builtin_expect(expr, val) (expr)
-#endif
-
-/* Determine the return address.  */
-#define RETURN_ADDRESS(nr) \
-  __builtin_extract_return_addr (__builtin_return_address (nr))
-
-/* When a reference to SYMBOL is encountered, the linker will emit a
-   warning message MSG.  */
-#ifdef HAVE_GNU_LD
-# ifdef HAVE_ELF
-
-/* We want the .gnu.warning.SYMBOL section to be unallocated.  */
-#  ifdef HAVE_ASM_PREVIOUS_DIRECTIVE
-#   define __make_section_unallocated(section_string)	\
-  asm (".section " section_string "\n\t.previous");
-#  elif defined HAVE_ASM_POPSECTION_DIRECTIVE
-#   define __make_section_unallocated(section_string)	\
-  asm (".pushsection " section_string "\n\t.popsection");
-#  else
-#   define __make_section_unallocated(section_string)
-#  endif
-
-/* Tacking on "\n\t#" to the section name makes gcc put it's bogus
-   section attributes on what looks like a comment to the assembler.  */
-#  ifdef HAVE_SECTION_QUOTES
-#   define link_warning(symbol, msg) \
-  __make_section_unallocated (".gnu.warning." #symbol) \
-  static const char __evoke_link_warning_##symbol[]	\
-    __attribute__ ((section (".gnu.warning." #symbol "\"\n\t#\""))) = msg;
-#  else
-#   define link_warning(symbol, msg) \
-  __make_section_unallocated (".gnu.warning." #symbol) \
-  static const char __evoke_link_warning_##symbol[]	\
-    __attribute__ ((section (".gnu.warning." #symbol "\n\t#"))) = msg;
-#  endif
-# else /* Not ELF: a.out */
-#  ifdef HAVE_XCOFF
-/* XCOFF does not support .stabs.
-   The native aix linker will remove the .stab and .stabstr sections
-   The gnu linker will have a fatal error if there is a relocation for
-   symbol in the .stab section.  Silently disable this macro.  */
-#   define link_warning(symbol, msg) 
-#  else
-#   define link_warning(symbol, msg)		\
-     asm (".stabs \"" msg "\",30,0,0,0\n\t"	\
-          ".stabs \"" __SYMBOL_PREFIX #symbol "\",1,0,0,0\n");
-#  endif /* XCOFF */
-# endif
-#else
-/* We will never be heard; they will all die horribly.  */
-# define link_warning(symbol, msg)
-#endif
-
-/* A canned warning for sysdeps/stub functions.  */
-#define	stub_warning(name) \
-  link_warning (name, \
-		"warning: " #name " is not implemented and will always fail")
-
-/*
-
-*/
-
-#ifdef HAVE_GNU_LD
-
-/* Symbol set support macros.  */
-
-# ifdef HAVE_ELF
-
-/* Make SYMBOL, which is in the text segment, an element of SET.  */
-#  define text_set_element(set, symbol)	_elf_set_element(set, symbol)
-/* Make SYMBOL, which is in the data segment, an element of SET.  */
-#  define data_set_element(set, symbol)	_elf_set_element(set, symbol)
-/* Make SYMBOL, which is in the bss segment, an element of SET.  */
-#  define bss_set_element(set, symbol)	_elf_set_element(set, symbol)
-
-/* These are all done the same way in ELF.
-   There is a new section created for each set.  */
-#  ifdef SHARED
-/* When building a shared library, make the set section writable,
-   because it will need to be relocated at run time anyway.  */
-#   define _elf_set_element(set, symbol) \
-  static const void *__elf_set_##set##_element_##symbol##__ \
-    __attribute__ ((unused, section (#set))) = &(symbol)
-#  else
-#   define _elf_set_element(set, symbol) \
-  static const void *const __elf_set_##set##_element_##symbol##__ \
-    __attribute__ ((unused, section (#set))) = &(symbol)
-#  endif
-
-/* Define SET as a symbol set.  This may be required (it is in a.out) to
-   be able to use the set's contents.  */
-#  define symbol_set_define(set)	symbol_set_declare(set)
-
-/* Declare SET for use in this module, if defined in another module.  */
-#  define symbol_set_declare(set) \
-  extern void *const __start_##set __attribute__ ((__weak__));		\
-  extern void *const __stop_##set __attribute__ ((__weak__));		\
-  weak_extern (__start_##set) weak_extern (__stop_##set)
-
-/* Return a pointer (void *const *) to the first element of SET.  */
-#  define symbol_set_first_element(set)	(&__start_##set)
-
-/* Return true iff PTR (a void *const *) has been incremented
-   past the last element in SET.  */
-#  define symbol_set_end_p(set, ptr)	((ptr) >= &__stop_##set)
-
-# else	/* Not ELF: a.out.  */
-
-#  ifdef HAVE_XCOFF
-/* XCOFF does not support .stabs.
-   The native aix linker will remove the .stab and .stabstr sections
-   The gnu linker will have a fatal error if there is a relocation for
-   symbol in the .stab section.  Silently disable these macros.  */
-#   define text_set_element(set, symbol) 
-#   define data_set_element(set, symbol) 
-#   define bss_set_element(set, symbol)	 
-#  else
-#   define text_set_element(set, symbol)	\
-    asm (".stabs \"" __SYMBOL_PREFIX #set "\",23,0,0," __SYMBOL_PREFIX #symbol)
-#   define data_set_element(set, symbol)	\
-    asm (".stabs \"" __SYMBOL_PREFIX #set "\",25,0,0," __SYMBOL_PREFIX #symbol)
-#   define bss_set_element(set, symbol)	?error Must use initialized data.
-#  endif /* XCOFF */
-#  define symbol_set_define(set)	void *const (set)[1];
-#  define symbol_set_declare(set)	extern void *const (set)[1];
-
-#  define symbol_set_first_element(set)	&(set)[1]
-#  define symbol_set_end_p(set, ptr)	(*(ptr) == 0)
-
-# endif	/* ELF.  */
-#else
-/* We cannot do anything in generial.  */
-# define text_set_element(set, symbol) asm ("")
-# define data_set_element(set, symbol) asm ("")
-# define bss_set_element(set, symbol) asm ("")
-# define symbol_set_define(set)		void *const (set)[1];
-# define symbol_set_declare(set)	extern void *const (set)[1];
-
-# define symbol_set_first_element(set)	&(set)[1]
-# define symbol_set_end_p(set, ptr)	(*(ptr) == 0)
-#endif	/* Have GNU ld.  */
-
-#if DO_VERSIONING
-# define symbol_version(real, name, version) \
-     _symbol_version(real, name, version)
-# define default_symbol_version(real, name, version) \
-     _default_symbol_version(real, name, version)
-# ifdef __ASSEMBLER__
-#  define _symbol_version(real, name, version) \
-     .symver real, name##@##version
-#  define _default_symbol_version(real, name, version) \
-     .symver real, name##@##@##version
-# else
-#  define _symbol_version(real, name, version) \
-     __asm__ (".symver " #real "," #name "@" #version)
-#  define _default_symbol_version(real, name, version) \
-     __asm__ (".symver " #real "," #name "@@" #version)
-# endif
-#else
-# define symbol_version(real, name, version)
-# define default_symbol_version(real, name, version) \
-  strong_alias(real, name)
-#endif
-
-#endif /* libc-symbols.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/linuxthreads.texi b/newlib/libc/sys/linux/linuxthreads/linuxthreads.texi
deleted file mode 100644
index 9513a67a6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/linuxthreads.texi
+++ /dev/null
@@ -1,1630 +0,0 @@
-@node POSIX Threads
-@c @node POSIX Threads, , Top, Top
-@chapter POSIX Threads
-@c %MENU% The standard threads library
-
-@c This chapter needs more work bigtime. -zw
-
-This chapter describes the pthreads (POSIX threads) library.  This
-library provides support functions for multithreaded programs: thread
-primitives, synchronization objects, and so forth.  It also implements
-POSIX 1003.1b semaphores (not to be confused with System V semaphores).
-
-The threads operations (@samp{pthread_*}) do not use @var{errno}.
-Instead they return an error code directly.  The semaphore operations do
-use @var{errno}.
-
-@menu
-* Basic Thread Operations::     Creating, terminating, and waiting for threads.
-* Thread Attributes::           Tuning thread scheduling.
-* Cancellation::                Stopping a thread before it's done.
-* Cleanup Handlers::            Deallocating resources when a thread is
-                                  canceled.
-* Mutexes::                     One way to synchronize threads.
-* Condition Variables::         Another way.
-* POSIX Semaphores::            And a third way.
-* Thread-Specific Data::        Variables with different values in
-                                  different threads.
-* Threads and Signal Handling:: Why you should avoid mixing the two, and
-                                  how to do it if you must.
-* Threads and Fork::            Interactions between threads and the
-                                  @code{fork} function.
-* Streams and Fork::            Interactions between stdio streams and
-                                  @code{fork}.
-* Miscellaneous Thread Functions:: A grab bag of utility routines.
-@end menu
-
-@node Basic Thread Operations
-@section Basic Thread Operations
-
-These functions are the thread equivalents of @code{fork}, @code{exit},
-and @code{wait}.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_create (pthread_t * @var{thread}, pthread_attr_t * @var{attr}, void * (*@var{start_routine})(void *), void * @var{arg})
-@code{pthread_create} creates a new thread of control that executes
-concurrently with the calling thread. The new thread calls the
-function @var{start_routine}, passing it @var{arg} as first argument. The
-new thread terminates either explicitly, by calling @code{pthread_exit},
-or implicitly, by returning from the @var{start_routine} function. The
-latter case is equivalent to calling @code{pthread_exit} with the result
-returned by @var{start_routine} as exit code.
-
-The @var{attr} argument specifies thread attributes to be applied to the
-new thread. @xref{Thread Attributes}, for details. The @var{attr}
-argument can also be @code{NULL}, in which case default attributes are
-used: the created thread is joinable (not detached) and has an ordinary
-(not realtime) scheduling policy.
-
-On success, the identifier of the newly created thread is stored in the
-location pointed by the @var{thread} argument, and a 0 is returned. On
-error, a non-zero error code is returned.
-
-This function may return the following errors:
-@table @code
-@item EAGAIN
-Not enough system resources to create a process for the new thread,
-or more than @code{PTHREAD_THREADS_MAX} threads are already active.
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun void pthread_exit (void *@var{retval})
-@code{pthread_exit} terminates the execution of the calling thread.  All
-cleanup handlers (@pxref{Cleanup Handlers}) that have been set for the
-calling thread with @code{pthread_cleanup_push} are executed in reverse
-order (the most recently pushed handler is executed first). Finalization
-functions for thread-specific data are then called for all keys that
-have non-@code{NULL} values associated with them in the calling thread
-(@pxref{Thread-Specific Data}).  Finally, execution of the calling
-thread is stopped.
-
-The @var{retval} argument is the return value of the thread. It can be
-retrieved from another thread using @code{pthread_join}.
-
-The @code{pthread_exit} function never returns.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cancel (pthread_t @var{thread})
-
-@code{pthread_cancel} sends a cancellation request to the thread denoted
-by the @var{thread} argument.  If there is no such thread,
-@code{pthread_cancel} fails and returns @code{ESRCH}.  Otherwise it
-returns 0. @xref{Cancellation}, for details.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_join (pthread_t @var{th}, void **thread_@var{return})
-@code{pthread_join} suspends the execution of the calling thread until
-the thread identified by @var{th} terminates, either by calling
-@code{pthread_exit} or by being canceled.
-
-If @var{thread_return} is not @code{NULL}, the return value of @var{th}
-is stored in the location pointed to by @var{thread_return}.  The return
-value of @var{th} is either the argument it gave to @code{pthread_exit},
-or @code{PTHREAD_CANCELED} if @var{th} was canceled.
-
-The joined thread @code{th} must be in the joinable state: it must not
-have been detached using @code{pthread_detach} or the
-@code{PTHREAD_CREATE_DETACHED} attribute to @code{pthread_create}.
-
-When a joinable thread terminates, its memory resources (thread
-descriptor and stack) are not deallocated until another thread performs
-@code{pthread_join} on it. Therefore, @code{pthread_join} must be called
-once for each joinable thread created to avoid memory leaks.
-
-At most one thread can wait for the termination of a given
-thread. Calling @code{pthread_join} on a thread @var{th} on which
-another thread is already waiting for termination returns an error.
-
-@code{pthread_join} is a cancellation point. If a thread is canceled
-while suspended in @code{pthread_join}, the thread execution resumes
-immediately and the cancellation is executed without waiting for the
-@var{th} thread to terminate. If cancellation occurs during
-@code{pthread_join}, the @var{th} thread remains not joined.
-
-On success, the return value of @var{th} is stored in the location
-pointed to by @var{thread_return}, and 0 is returned. On error, one of
-the following values is returned:
-@table @code
-@item ESRCH
-No thread could be found corresponding to that specified by @var{th}.
-@item EINVAL
-The @var{th} thread has been detached, or another thread is already
-waiting on termination of @var{th}.
-@item EDEADLK
-The @var{th} argument refers to the calling thread.
-@end table
-@end deftypefun
-
-@node Thread Attributes
-@section Thread Attributes
-
-@comment pthread.h
-@comment POSIX
-
-Threads have a number of attributes that may be set at creation time.
-This is done by filling a thread attribute object @var{attr} of type
-@code{pthread_attr_t}, then passing it as second argument to
-@code{pthread_create}. Passing @code{NULL} is equivalent to passing a
-thread attribute object with all attributes set to their default values.
-
-Attribute objects are consulted only when creating a new thread.  The
-same attribute object can be used for creating several threads.
-Modifying an attribute object after a call to @code{pthread_create} does
-not change the attributes of the thread previously created.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_attr_init (pthread_attr_t *@var{attr})
-@code{pthread_attr_init} initializes the thread attribute object
-@var{attr} and fills it with default values for the attributes. (The
-default values are listed below for each attribute.)
-
-Each attribute @var{attrname} (see below for a list of all attributes)
-can be individually set using the function
-@code{pthread_attr_set@var{attrname}} and retrieved using the function
-@code{pthread_attr_get@var{attrname}}.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_attr_destroy (pthread_attr_t *@var{attr})
-@code{pthread_attr_destroy} destroys the attribute object pointed to by
-@var{attr} releasing any resources associated with it.  @var{attr} is
-left in an undefined state, and you must not use it again in a call to
-any pthreads function until it has been reinitialized.
-@end deftypefun
-
-@findex pthread_attr_setdetachstate
-@findex pthread_attr_setguardsize
-@findex pthread_attr_setinheritsched
-@findex pthread_attr_setschedparam
-@findex pthread_attr_setschedpolicy
-@findex pthread_attr_setscope
-@findex pthread_attr_setstack
-@findex pthread_attr_setstackaddr
-@findex pthread_attr_setstacksize
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_attr_setattr (pthread_attr_t *@var{obj}, int @var{value})
-Set attribute @var{attr} to @var{value} in the attribute object pointed
-to by @var{obj}.  See below for a list of possible attributes and the
-values they can take.
-
-On success, these functions return 0.  If @var{value} is not meaningful
-for the @var{attr} being modified, they will return the error code
-@code{EINVAL}.  Some of the functions have other failure modes; see
-below.
-@end deftypefun
-
-@findex pthread_attr_getdetachstate
-@findex pthread_attr_getguardsize
-@findex pthread_attr_getinheritsched
-@findex pthread_attr_getschedparam
-@findex pthread_attr_getschedpolicy
-@findex pthread_attr_getscope
-@findex pthread_attr_getstack
-@findex pthread_attr_getstackaddr
-@findex pthread_attr_getstacksize
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_attr_getattr (const pthread_attr_t *@var{obj}, int *@var{value})
-Store the current setting of @var{attr} in @var{obj} into the variable
-pointed to by @var{value}.
-
-These functions always return 0.
-@end deftypefun
-
-The following thread attributes are supported:
-@table @samp
-@item detachstate
-Choose whether the thread is created in the joinable state (value
-@code{PTHREAD_CREATE_JOINABLE}) or in the detached state
-(@code{PTHREAD_CREATE_DETACHED}).  The default is
-@code{PTHREAD_CREATE_JOINABLE}.
-
-In the joinable state, another thread can synchronize on the thread
-termination and recover its termination code using @code{pthread_join},
-but some of the thread resources are kept allocated after the thread
-terminates, and reclaimed only when another thread performs
-@code{pthread_join} on that thread.
-
-In the detached state, the thread resources are immediately freed when
-it terminates, but @code{pthread_join} cannot be used to synchronize on
-the thread termination.
-
-A thread created in the joinable state can later be put in the detached
-thread using @code{pthread_detach}.
-
-@item schedpolicy
-Select the scheduling policy for the thread: one of @code{SCHED_OTHER}
-(regular, non-realtime scheduling), @code{SCHED_RR} (realtime,
-round-robin) or @code{SCHED_FIFO} (realtime, first-in first-out).
-The default is @code{SCHED_OTHER}.
-@c Not doc'd in our manual: FIXME.
-@c See @code{sched_setpolicy} for more information on scheduling policies.
-
-The realtime scheduling policies @code{SCHED_RR} and @code{SCHED_FIFO}
-are available only to processes with superuser privileges.
-@code{pthread_attr_setschedparam} will fail and return @code{ENOTSUP} if
-you try to set a realtime policy when you are unprivileged.
-
-The scheduling policy of a thread can be changed after creation with
-@code{pthread_setschedparam}.
-
-@item schedparam
-Change the scheduling parameter (the scheduling priority)
-for the thread.  The default is 0.
-
-This attribute is not significant if the scheduling policy is
-@code{SCHED_OTHER}; it only matters for the realtime policies
-@code{SCHED_RR} and @code{SCHED_FIFO}.
-
-The scheduling priority of a thread can be changed after creation with
-@code{pthread_setschedparam}.
-
-@item inheritsched
-Choose whether the scheduling policy and scheduling parameter for the
-newly created thread are determined by the values of the
-@var{schedpolicy} and @var{schedparam} attributes (value
-@code{PTHREAD_EXPLICIT_SCHED}) or are inherited from the parent thread
-(value @code{PTHREAD_INHERIT_SCHED}).  The default is
-@code{PTHREAD_EXPLICIT_SCHED}.
-
-@item scope
-Choose the scheduling contention scope for the created thread.  The
-default is @code{PTHREAD_SCOPE_SYSTEM}, meaning that the threads contend
-for CPU time with all processes running on the machine. In particular,
-thread priorities are interpreted relative to the priorities of all
-other processes on the machine. The other possibility,
-@code{PTHREAD_SCOPE_PROCESS}, means that scheduling contention occurs
-only between the threads of the running process: thread priorities are
-interpreted relative to the priorities of the other threads of the
-process, regardless of the priorities of other processes.
-
-@code{PTHREAD_SCOPE_PROCESS} is not supported in LinuxThreads.  If you
-try to set the scope to this value, @code{pthread_attr_setscope} will
-fail and return @code{ENOTSUP}.
-
-@item stackaddr
-Provide an address for an application managed stack.  The size of the
-stack must be at least @code{PTHREAD_STACK_MIN}.
-
-@item stacksize
-Change the size of the stack created for the thread.  The value defines
-the minimum stack size, in bytes.
-
-If the value exceeds the system's maximum stack size, or is smaller
-than @code{PTHREAD_STACK_MIN}, @code{pthread_attr_setstacksize} will
-fail and return @code{EINVAL}.
-
-@item stack
-Provide both the address and size of an application managed stack to
-use for the new thread.  The base of the memory area is @var{stackaddr}
-with the size of the memory area, @var{stacksize}, measured in bytes.
-
-If the value of @var{stacksize} is less than @code{PTHREAD_STACK_MIN},
-or greater than the system's maximum stack size, or if the value of
-@var{stackaddr} lacks the proper alignment, @code{pthread_attr_setstack}
-will fail and return @code{EINVAL}.
-
-@item guardsize
-Change the minimum size in bytes of the guard area for the thread's
-stack.  The default size is a single page.  If this value is set, it
-will be rounded up to the nearest page size.  If the value is set to 0,
-a guard area will not be created for this thread.  The space allocated
-for the guard area is used to catch stack overflow.  Therefore, when
-allocating large structures on the stack, a larger guard area may be
-required to catch a stack overflow.
-
-If the caller is managing their own stacks (if the @code{stackaddr}
-attribute has been set), then the @code{guardsize} attribute is ignored.
-
-If the value exceeds the @code{stacksize}, @code{pthread_atrr_setguardsize}
-will fail and return @code{EINVAL}.
-@end table
-
-@node Cancellation
-@section Cancellation
-
-Cancellation is the mechanism by which a thread can terminate the
-execution of another thread. More precisely, a thread can send a
-cancellation request to another thread. Depending on its settings, the
-target thread can then either ignore the request, honor it immediately,
-or defer it till it reaches a cancellation point.  When threads are
-first created by @code{pthread_create}, they always defer cancellation
-requests.
-
-When a thread eventually honors a cancellation request, it behaves as if
-@code{pthread_exit(PTHREAD_CANCELED)} was called.  All cleanup handlers
-are executed in reverse order, finalization functions for
-thread-specific data are called, and finally the thread stops executing.
-If the canceled thread was joinable, the return value
-@code{PTHREAD_CANCELED} is provided to whichever thread calls
-@var{pthread_join} on it. See @code{pthread_exit} for more information.
-
-Cancellation points are the points where the thread checks for pending
-cancellation requests and performs them.  The POSIX threads functions
-@code{pthread_join}, @code{pthread_cond_wait},
-@code{pthread_cond_timedwait}, @code{pthread_testcancel},
-@code{sem_wait}, and @code{sigwait} are cancellation points.  In
-addition, these system calls are cancellation points:
-
-@multitable @columnfractions .33 .33 .33
-@item @t{accept}	@tab @t{open}		@tab @t{sendmsg}
-@item @t{close}		@tab @t{pause}		@tab @t{sendto}
-@item @t{connect}	@tab @t{read}		@tab @t{system}
-@item @t{fcntl}		@tab @t{recv}		@tab @t{tcdrain}
-@item @t{fsync}		@tab @t{recvfrom}	@tab @t{wait}
-@item @t{lseek}		@tab @t{recvmsg}	@tab @t{waitpid}
-@item @t{msync}		@tab @t{send}		@tab @t{write}
-@item @t{nanosleep}
-@end multitable
-
-@noindent
-All library functions that call these functions (such as
-@code{printf}) are also cancellation points.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_setcancelstate (int @var{state}, int *@var{oldstate})
-@code{pthread_setcancelstate} changes the cancellation state for the
-calling thread -- that is, whether cancellation requests are ignored or
-not. The @var{state} argument is the new cancellation state: either
-@code{PTHREAD_CANCEL_ENABLE} to enable cancellation, or
-@code{PTHREAD_CANCEL_DISABLE} to disable cancellation (cancellation
-requests are ignored).
-
-If @var{oldstate} is not @code{NULL}, the previous cancellation state is
-stored in the location pointed to by @var{oldstate}, and can thus be
-restored later by another call to @code{pthread_setcancelstate}.
-
-If the @var{state} argument is not @code{PTHREAD_CANCEL_ENABLE} or
-@code{PTHREAD_CANCEL_DISABLE}, @code{pthread_setcancelstate} fails and
-returns @code{EINVAL}.  Otherwise it returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_setcanceltype (int @var{type}, int *@var{oldtype})
-@code{pthread_setcanceltype} changes the type of responses to
-cancellation requests for the calling thread: asynchronous (immediate)
-or deferred.  The @var{type} argument is the new cancellation type:
-either @code{PTHREAD_CANCEL_ASYNCHRONOUS} to cancel the calling thread
-as soon as the cancellation request is received, or
-@code{PTHREAD_CANCEL_DEFERRED} to keep the cancellation request pending
-until the next cancellation point. If @var{oldtype} is not @code{NULL},
-the previous cancellation state is stored in the location pointed to by
-@var{oldtype}, and can thus be restored later by another call to
-@code{pthread_setcanceltype}.
-
-If the @var{type} argument is not @code{PTHREAD_CANCEL_DEFERRED} or
-@code{PTHREAD_CANCEL_ASYNCHRONOUS}, @code{pthread_setcanceltype} fails
-and returns @code{EINVAL}.  Otherwise it returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun void pthread_testcancel (@var{void})
-@code{pthread_testcancel} does nothing except testing for pending
-cancellation and executing it. Its purpose is to introduce explicit
-checks for cancellation in long sequences of code that do not call
-cancellation point functions otherwise.
-@end deftypefun
-
-@node Cleanup Handlers
-@section Cleanup Handlers
-
-Cleanup handlers are functions that get called when a thread terminates,
-either by calling @code{pthread_exit} or because of
-cancellation. Cleanup handlers are installed and removed following a
-stack-like discipline.
-
-The purpose of cleanup handlers is to free the resources that a thread
-may hold at the time it terminates. In particular, if a thread exits or
-is canceled while it owns a locked mutex, the mutex will remain locked
-forever and prevent other threads from executing normally. The best way
-to avoid this is, just before locking the mutex, to install a cleanup
-handler whose effect is to unlock the mutex. Cleanup handlers can be
-used similarly to free blocks allocated with @code{malloc} or close file
-descriptors on thread termination.
-
-Here is how to lock a mutex @var{mut} in such a way that it will be
-unlocked if the thread is canceled while @var{mut} is locked:
-
-@smallexample
-pthread_cleanup_push(pthread_mutex_unlock, (void *) &mut);
-pthread_mutex_lock(&mut);
-/* do some work */
-pthread_mutex_unlock(&mut);
-pthread_cleanup_pop(0);
-@end smallexample
-
-Equivalently, the last two lines can be replaced by
-
-@smallexample
-pthread_cleanup_pop(1);
-@end smallexample
-
-Notice that the code above is safe only in deferred cancellation mode
-(see @code{pthread_setcanceltype}). In asynchronous cancellation mode, a
-cancellation can occur between @code{pthread_cleanup_push} and
-@code{pthread_mutex_lock}, or between @code{pthread_mutex_unlock} and
-@code{pthread_cleanup_pop}, resulting in both cases in the thread trying
-to unlock a mutex not locked by the current thread. This is the main
-reason why asynchronous cancellation is difficult to use.
-
-If the code above must also work in asynchronous cancellation mode,
-then it must switch to deferred mode for locking and unlocking the
-mutex:
-
-@smallexample
-pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype);
-pthread_cleanup_push(pthread_mutex_unlock, (void *) &mut);
-pthread_mutex_lock(&mut);
-/* do some work */
-pthread_cleanup_pop(1);
-pthread_setcanceltype(oldtype, NULL);
-@end smallexample
-
-The code above can be rewritten in a more compact and efficient way,
-using the non-portable functions @code{pthread_cleanup_push_defer_np}
-and @code{pthread_cleanup_pop_restore_np}:
-
-@smallexample
-pthread_cleanup_push_defer_np(pthread_mutex_unlock, (void *) &mut);
-pthread_mutex_lock(&mut);
-/* do some work */
-pthread_cleanup_pop_restore_np(1);
-@end smallexample
-
-@comment pthread.h
-@comment POSIX
-@deftypefun void pthread_cleanup_push (void (*@var{routine}) (void *), void *@var{arg})
-
-@code{pthread_cleanup_push} installs the @var{routine} function with
-argument @var{arg} as a cleanup handler. From this point on to the
-matching @code{pthread_cleanup_pop}, the function @var{routine} will be
-called with arguments @var{arg} when the thread terminates, either
-through @code{pthread_exit} or by cancellation. If several cleanup
-handlers are active at that point, they are called in LIFO order: the
-most recently installed handler is called first.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun void pthread_cleanup_pop (int @var{execute})
-@code{pthread_cleanup_pop} removes the most recently installed cleanup
-handler. If the @var{execute} argument is not 0, it also executes the
-handler, by calling the @var{routine} function with arguments
-@var{arg}. If the @var{execute} argument is 0, the handler is only
-removed but not executed.
-@end deftypefun
-
-Matching pairs of @code{pthread_cleanup_push} and
-@code{pthread_cleanup_pop} must occur in the same function, at the same
-level of block nesting.  Actually, @code{pthread_cleanup_push} and
-@code{pthread_cleanup_pop} are macros, and the expansion of
-@code{pthread_cleanup_push} introduces an open brace @code{@{} with the
-matching closing brace @code{@}} being introduced by the expansion of the
-matching @code{pthread_cleanup_pop}.
-
-@comment pthread.h
-@comment GNU
-@deftypefun void pthread_cleanup_push_defer_np (void (*@var{routine}) (void *), void *@var{arg})
-@code{pthread_cleanup_push_defer_np} is a non-portable extension that
-combines @code{pthread_cleanup_push} and @code{pthread_setcanceltype}.
-It pushes a cleanup handler just as @code{pthread_cleanup_push} does,
-but also saves the current cancellation type and sets it to deferred
-cancellation. This ensures that the cleanup mechanism is effective even
-if the thread was initially in asynchronous cancellation mode.
-@end deftypefun
-
-@comment pthread.h
-@comment GNU
-@deftypefun void pthread_cleanup_pop_restore_np (int @var{execute})
-@code{pthread_cleanup_pop_restore_np} pops a cleanup handler introduced
-by @code{pthread_cleanup_push_defer_np}, and restores the cancellation
-type to its value at the time @code{pthread_cleanup_push_defer_np} was
-called.
-@end deftypefun
-
-@code{pthread_cleanup_push_defer_np} and
-@code{pthread_cleanup_pop_restore_np} must occur in matching pairs, at
-the same level of block nesting.
-
-The sequence
-
-@smallexample
-pthread_cleanup_push_defer_np(routine, arg);
-...
-pthread_cleanup_pop_defer_np(execute);
-@end smallexample
-
-@noindent
-is functionally equivalent to (but more compact and efficient than)
-
-@smallexample
-@{
-  int oldtype;
-  pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype);
-  pthread_cleanup_push(routine, arg);
-  ...
-  pthread_cleanup_pop(execute);
-  pthread_setcanceltype(oldtype, NULL);
-@}
-@end smallexample
-
-
-@node Mutexes
-@section Mutexes
-
-A mutex is a MUTual EXclusion device, and is useful for protecting
-shared data structures from concurrent modifications, and implementing
-critical sections and monitors.
-
-A mutex has two possible states: unlocked (not owned by any thread),
-and locked (owned by one thread). A mutex can never be owned by two
-different threads simultaneously. A thread attempting to lock a mutex
-that is already locked by another thread is suspended until the owning
-thread unlocks the mutex first.
-
-None of the mutex functions is a cancellation point, not even
-@code{pthread_mutex_lock}, in spite of the fact that it can suspend a
-thread for arbitrary durations. This way, the status of mutexes at
-cancellation points is predictable, allowing cancellation handlers to
-unlock precisely those mutexes that need to be unlocked before the
-thread stops executing. Consequently, threads using deferred
-cancellation should never hold a mutex for extended periods of time.
-
-It is not safe to call mutex functions from a signal handler.  In
-particular, calling @code{pthread_mutex_lock} or
-@code{pthread_mutex_unlock} from a signal handler may deadlock the
-calling thread.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_init (pthread_mutex_t *@var{mutex}, const pthread_mutexattr_t *@var{mutexattr})
-
-@code{pthread_mutex_init} initializes the mutex object pointed to by
-@var{mutex} according to the mutex attributes specified in @var{mutexattr}.
-If @var{mutexattr} is @code{NULL}, default attributes are used instead.
-
-The LinuxThreads implementation supports only one mutex attribute,
-the @var{mutex type}, which is either ``fast'', ``recursive'', or
-``error checking''. The type of a mutex determines whether
-it can be locked again by a thread that already owns it.
-The default type is ``fast''.
-
-Variables of type @code{pthread_mutex_t} can also be initialized
-statically, using the constants @code{PTHREAD_MUTEX_INITIALIZER} (for
-timed mutexes), @code{PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP} (for
-recursive mutexes), @code{PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP}
-(for fast mutexes(, and @code{PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP}
-(for error checking mutexes).
-
-@code{pthread_mutex_init} always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_lock (pthread_mutex_t *mutex))
-@code{pthread_mutex_lock} locks the given mutex. If the mutex is
-currently unlocked, it becomes locked and owned by the calling thread,
-and @code{pthread_mutex_lock} returns immediately. If the mutex is
-already locked by another thread, @code{pthread_mutex_lock} suspends the
-calling thread until the mutex is unlocked.
-
-If the mutex is already locked by the calling thread, the behavior of
-@code{pthread_mutex_lock} depends on the type of the mutex. If the mutex
-is of the ``fast'' type, the calling thread is suspended.  It will
-remain suspended forever, because no other thread can unlock the mutex.
-If  the mutex is of the ``error checking'' type, @code{pthread_mutex_lock}
-returns immediately with the error code @code{EDEADLK}.  If the mutex is
-of the ``recursive'' type, @code{pthread_mutex_lock} succeeds and
-returns immediately, recording the number of times the calling thread
-has locked the mutex. An equal number of @code{pthread_mutex_unlock}
-operations must be performed before the mutex returns to the unlocked
-state.
-@c This doesn't discuss PTHREAD_MUTEX_TIMED_NP mutex attributes. FIXME
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_trylock (pthread_mutex_t *@var{mutex})
-@code{pthread_mutex_trylock} behaves identically to
-@code{pthread_mutex_lock}, except that it does not block the calling
-thread if the mutex is already locked by another thread (or by the
-calling thread in the case of a ``fast'' mutex). Instead,
-@code{pthread_mutex_trylock} returns immediately with the error code
-@code{EBUSY}.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_timedlock (pthread_mutex_t *@var{mutex}, const struct timespec *@var{abstime})
-The @code{pthread_mutex_timedlock} is similar to the
-@code{pthread_mutex_lock} function but instead of blocking for in
-indefinite time if the mutex is locked by another thread, it returns
-when the time specified in @var{abstime} is reached.
-
-This function can only be used on standard (``timed'') and ``error
-checking'' mutexes.  It behaves just like @code{pthread_mutex_lock} for
-all other types.
-
-If the mutex is successfully locked, the function returns zero.  If the
-time specified in @var{abstime} is reached without the mutex being locked,
-@code{ETIMEDOUT} is returned.
-
-This function was introduced in the POSIX.1d revision of the POSIX standard.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_unlock (pthread_mutex_t *@var{mutex})
-@code{pthread_mutex_unlock} unlocks the given mutex. The mutex is
-assumed to be locked and owned by the calling thread on entrance to
-@code{pthread_mutex_unlock}. If the mutex is of the ``fast'' type,
-@code{pthread_mutex_unlock} always returns it to the unlocked state. If
-it is of the ``recursive'' type, it decrements the locking count of the
-mutex (number of @code{pthread_mutex_lock} operations performed on it by
-the calling thread), and only when this count reaches zero is the mutex
-actually unlocked.
-
-On ``error checking'' mutexes, @code{pthread_mutex_unlock} actually
-checks at run-time that the mutex is locked on entrance, and that it was
-locked by the same thread that is now calling
-@code{pthread_mutex_unlock}.  If these conditions are not met,
-@code{pthread_mutex_unlock} returns @code{EPERM}, and the mutex remains
-unchanged.  ``Fast'' and ``recursive'' mutexes perform no such checks,
-thus allowing a locked mutex to be unlocked by a thread other than its
-owner. This is non-portable behavior and must not be relied upon.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutex_destroy (pthread_mutex_t *@var{mutex})
-@code{pthread_mutex_destroy} destroys a mutex object, freeing the
-resources it might hold. The mutex must be unlocked on entrance. In the
-LinuxThreads implementation, no resources are associated with mutex
-objects, thus @code{pthread_mutex_destroy} actually does nothing except
-checking that the mutex is unlocked.
-
-If the mutex is locked by some thread, @code{pthread_mutex_destroy}
-returns @code{EBUSY}.  Otherwise it returns 0.
-@end deftypefun
-
-If any of the above functions (except @code{pthread_mutex_init})
-is applied to an uninitialized mutex, they will simply return
-@code{EINVAL} and do nothing.
-
-A shared global variable @var{x} can be protected by a mutex as follows:
-
-@smallexample
-int x;
-pthread_mutex_t mut = PTHREAD_MUTEX_INITIALIZER;
-@end smallexample
-
-All accesses and modifications to @var{x} should be bracketed by calls to
-@code{pthread_mutex_lock} and @code{pthread_mutex_unlock} as follows:
-
-@smallexample
-pthread_mutex_lock(&mut);
-/* operate on x */
-pthread_mutex_unlock(&mut);
-@end smallexample
-
-Mutex attributes can be specified at mutex creation time, by passing a
-mutex attribute object as second argument to @code{pthread_mutex_init}.
-Passing @code{NULL} is equivalent to passing a mutex attribute object
-with all attributes set to their default values.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutexattr_init (pthread_mutexattr_t *@var{attr})
-@code{pthread_mutexattr_init} initializes the mutex attribute object
-@var{attr} and fills it with default values for the attributes.
-
-This function always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutexattr_destroy (pthread_mutexattr_t *@var{attr})
-@code{pthread_mutexattr_destroy} destroys a mutex attribute object,
-which must not be reused until it is
-reinitialized. @code{pthread_mutexattr_destroy} does nothing in the
-LinuxThreads implementation.
-
-This function always returns 0.
-@end deftypefun
-
-LinuxThreads supports only one mutex attribute: the mutex type, which is
-either @code{PTHREAD_MUTEX_ADAPTIVE_NP} for ``fast'' mutexes,
-@code{PTHREAD_MUTEX_RECURSIVE_NP} for ``recursive'' mutexes,
-@code{PTHREAD_MUTEX_TIMED_NP} for ``timed'' mutexes, or
-@code{PTHREAD_MUTEX_ERRORCHECK_NP} for ``error checking'' mutexes.  As
-the @code{NP} suffix indicates, this is a non-portable extension to the
-POSIX standard and should not be employed in portable programs.
-
-The mutex type determines what happens if a thread attempts to lock a
-mutex it already owns with @code{pthread_mutex_lock}. If the mutex is of
-the ``fast'' type, @code{pthread_mutex_lock} simply suspends the calling
-thread forever.  If the mutex is of the ``error checking'' type,
-@code{pthread_mutex_lock} returns immediately with the error code
-@code{EDEADLK}.  If the mutex is of the ``recursive'' type, the call to
-@code{pthread_mutex_lock} returns immediately with a success return
-code. The number of times the thread owning the mutex has locked it is
-recorded in the mutex. The owning thread must call
-@code{pthread_mutex_unlock} the same number of times before the mutex
-returns to the unlocked state.
-
-The default mutex type is ``timed'', that is, @code{PTHREAD_MUTEX_TIMED_NP}.
-@c This doesn't describe how a ``timed'' mutex behaves. FIXME
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutexattr_settype (pthread_mutexattr_t *@var{attr}, int @var{type})
-@code{pthread_mutexattr_settype} sets the mutex type attribute in
-@var{attr} to the value specified by @var{type}.
-
-If @var{type} is not @code{PTHREAD_MUTEX_ADAPTIVE_NP},
-@code{PTHREAD_MUTEX_RECURSIVE_NP}, @code{PTHREAD_MUTEX_TIMED_NP}, or
-@code{PTHREAD_MUTEX_ERRORCHECK_NP}, this function will return
-@code{EINVAL} and leave @var{attr} unchanged.
-
-The standard Unix98 identifiers @code{PTHREAD_MUTEX_DEFAULT},
-@code{PTHREAD_MUTEX_NORMAL}, @code{PTHREAD_MUTEX_RECURSIVE},
-and @code{PTHREAD_MUTEX_ERRORCHECK} are also permitted.
-
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_mutexattr_gettype (const pthread_mutexattr_t *@var{attr}, int *@var{type})
-@code{pthread_mutexattr_gettype} retrieves the current value of the
-mutex type attribute in @var{attr} and stores it in the location pointed
-to by @var{type}.
-
-This function always returns 0.
-@end deftypefun
-
-@node Condition Variables
-@section Condition Variables
-
-A condition (short for ``condition variable'') is a synchronization
-device that allows threads to suspend execution until some predicate on
-shared data is satisfied. The basic operations on conditions are: signal
-the condition (when the predicate becomes true), and wait for the
-condition, suspending the thread execution until another thread signals
-the condition.
-
-A condition variable must always be associated with a mutex, to avoid
-the race condition where a thread prepares to wait on a condition
-variable and another thread signals the condition just before the first
-thread actually waits on it.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_init (pthread_cond_t *@var{cond}, pthread_condattr_t *cond_@var{attr})
-
-@code{pthread_cond_init} initializes the condition variable @var{cond},
-using the condition attributes specified in @var{cond_attr}, or default
-attributes if @var{cond_attr} is @code{NULL}. The LinuxThreads
-implementation supports no attributes for conditions, hence the
-@var{cond_attr} parameter is actually ignored.
-
-Variables of type @code{pthread_cond_t} can also be initialized
-statically, using the constant @code{PTHREAD_COND_INITIALIZER}.
-
-This function always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_signal (pthread_cond_t *@var{cond})
-@code{pthread_cond_signal} restarts one of the threads that are waiting
-on the condition variable @var{cond}. If no threads are waiting on
-@var{cond}, nothing happens. If several threads are waiting on
-@var{cond}, exactly one is restarted, but it is not specified which.
-
-This function always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_broadcast (pthread_cond_t *@var{cond})
-@code{pthread_cond_broadcast} restarts all the threads that are waiting
-on the condition variable @var{cond}. Nothing happens if no threads are
-waiting on @var{cond}.
-
-This function always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_wait (pthread_cond_t *@var{cond}, pthread_mutex_t *@var{mutex})
-@code{pthread_cond_wait} atomically unlocks the @var{mutex} (as per
-@code{pthread_unlock_mutex}) and waits for the condition variable
-@var{cond} to be signaled. The thread execution is suspended and does
-not consume any CPU time until the condition variable is signaled. The
-@var{mutex} must be locked by the calling thread on entrance to
-@code{pthread_cond_wait}. Before returning to the calling thread,
-@code{pthread_cond_wait} re-acquires @var{mutex} (as per
-@code{pthread_lock_mutex}).
-
-Unlocking the mutex and suspending on the condition variable is done
-atomically. Thus, if all threads always acquire the mutex before
-signaling the condition, this guarantees that the condition cannot be
-signaled (and thus ignored) between the time a thread locks the mutex
-and the time it waits on the condition variable.
-
-This function always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_timedwait (pthread_cond_t *@var{cond}, pthread_mutex_t *@var{mutex}, const struct timespec *@var{abstime})
-@code{pthread_cond_timedwait} atomically unlocks @var{mutex} and waits
-on @var{cond}, as @code{pthread_cond_wait} does, but it also bounds the
-duration of the wait. If @var{cond} has not been signaled before time
-@var{abstime}, the mutex @var{mutex} is re-acquired and
-@code{pthread_cond_timedwait} returns the error code @code{ETIMEDOUT}.
-The wait can also be interrupted by a signal; in that case
-@code{pthread_cond_timedwait} returns @code{EINTR}.
-
-The @var{abstime} parameter specifies an absolute time, with the same
-origin as @code{time} and @code{gettimeofday}: an @var{abstime} of 0
-corresponds to 00:00:00 GMT, January 1, 1970.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_cond_destroy (pthread_cond_t *@var{cond})
-@code{pthread_cond_destroy} destroys the condition variable @var{cond},
-freeing the resources it might hold.  If any threads are waiting on the
-condition variable, @code{pthread_cond_destroy} leaves @var{cond}
-untouched and returns @code{EBUSY}.  Otherwise it returns 0, and
-@var{cond} must not be used again until it is reinitialized.
-
-In the LinuxThreads implementation, no resources are associated with
-condition variables, so @code{pthread_cond_destroy} actually does
-nothing.
-@end deftypefun
-
-@code{pthread_cond_wait} and @code{pthread_cond_timedwait} are
-cancellation points. If a thread is canceled while suspended in one of
-these functions, the thread immediately resumes execution, relocks the
-mutex specified by  @var{mutex}, and finally executes the cancellation.
-Consequently, cleanup handlers are assured that @var{mutex} is locked
-when they are called.
-
-It is not safe to call the condition variable functions from a signal
-handler. In particular, calling @code{pthread_cond_signal} or
-@code{pthread_cond_broadcast} from a signal handler may deadlock the
-calling thread.
-
-Consider two shared variables @var{x} and @var{y}, protected by the
-mutex @var{mut}, and a condition variable @var{cond} that is to be
-signaled whenever @var{x} becomes greater than @var{y}.
-
-@smallexample
-int x,y;
-pthread_mutex_t mut = PTHREAD_MUTEX_INITIALIZER;
-pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
-@end smallexample
-
-Waiting until @var{x} is greater than @var{y} is performed as follows:
-
-@smallexample
-pthread_mutex_lock(&mut);
-while (x <= y) @{
-        pthread_cond_wait(&cond, &mut);
-@}
-/* operate on x and y */
-pthread_mutex_unlock(&mut);
-@end smallexample
-
-Modifications on @var{x} and @var{y} that may cause @var{x} to become greater than
-@var{y} should signal the condition if needed:
-
-@smallexample
-pthread_mutex_lock(&mut);
-/* modify x and y */
-if (x > y) pthread_cond_broadcast(&cond);
-pthread_mutex_unlock(&mut);
-@end smallexample
-
-If it can be proved that at most one waiting thread needs to be waken
-up (for instance, if there are only two threads communicating through
-@var{x} and @var{y}), @code{pthread_cond_signal} can be used as a slightly more
-efficient alternative to @code{pthread_cond_broadcast}. In doubt, use
-@code{pthread_cond_broadcast}.
-
-To wait for @var{x} to becomes greater than @var{y} with a timeout of 5
-seconds, do:
-
-@smallexample
-struct timeval now;
-struct timespec timeout;
-int retcode;
-
-pthread_mutex_lock(&mut);
-gettimeofday(&now);
-timeout.tv_sec = now.tv_sec + 5;
-timeout.tv_nsec = now.tv_usec * 1000;
-retcode = 0;
-while (x <= y && retcode != ETIMEDOUT) @{
-        retcode = pthread_cond_timedwait(&cond, &mut, &timeout);
-@}
-if (retcode == ETIMEDOUT) @{
-        /* timeout occurred */
-@} else @{
-        /* operate on x and y */
-@}
-pthread_mutex_unlock(&mut);
-@end smallexample
-
-Condition attributes can be specified at condition creation time, by
-passing a condition attribute object as second argument to
-@code{pthread_cond_init}.  Passing @code{NULL} is equivalent to passing
-a condition attribute object with all attributes set to their default
-values.
-
-The LinuxThreads implementation supports no attributes for
-conditions. The functions on condition attributes are included only for
-compliance with the POSIX standard.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_condattr_init (pthread_condattr_t *@var{attr})
-@deftypefunx int pthread_condattr_destroy (pthread_condattr_t *@var{attr})
-@code{pthread_condattr_init} initializes the condition attribute object
-@var{attr} and fills it with default values for the attributes.
-@code{pthread_condattr_destroy} destroys the condition attribute object
-@var{attr}.
-
-Both functions do nothing in the LinuxThreads implementation.
-
-@code{pthread_condattr_init} and @code{pthread_condattr_destroy} always
-return 0.
-@end deftypefun
-
-@node POSIX Semaphores
-@section POSIX Semaphores
-
-@vindex SEM_VALUE_MAX
-Semaphores are counters for resources shared between threads. The
-basic operations on semaphores are: increment the counter atomically,
-and wait until the counter is non-null and decrement it atomically.
-
-Semaphores have a maximum value past which they cannot be incremented.
-The macro @code{SEM_VALUE_MAX} is defined to be this maximum value.  In
-the GNU C library, @code{SEM_VALUE_MAX} is equal to @code{INT_MAX}
-(@pxref{Range of Type}), but it may be much smaller on other systems.
-
-The pthreads library implements POSIX 1003.1b semaphores.  These should
-not be confused with System V semaphores (@code{ipc}, @code{semctl} and
-@code{semop}).
-@c !!! SysV IPC is not doc'd at all in our manual
-
-All the semaphore functions and macros are defined in @file{semaphore.h}.
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_init (sem_t *@var{sem}, int @var{pshared}, unsigned int @var{value})
-@code{sem_init} initializes the semaphore object pointed to by
-@var{sem}. The count associated with the semaphore is set initially to
-@var{value}. The @var{pshared} argument indicates whether the semaphore
-is local to the current process (@var{pshared} is zero) or is to be
-shared between several processes (@var{pshared} is not zero).
-
-On success @code{sem_init} returns 0.  On failure it returns -1 and sets
-@var{errno} to one of the following values:
-
-@table @code
-@item EINVAL
-@var{value} exceeds the maximal counter value @code{SEM_VALUE_MAX}
-
-@item ENOSYS
-@var{pshared} is not zero.  LinuxThreads currently does not support
-process-shared semaphores.  (This will eventually change.)
-@end table
-@end deftypefun
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_destroy (sem_t * @var{sem})
-@code{sem_destroy} destroys a semaphore object, freeing the resources it
-might hold.  If any threads are waiting on the semaphore when
-@code{sem_destroy} is called, it fails and sets @var{errno} to
-@code{EBUSY}.
-
-In the LinuxThreads implementation, no resources are associated with
-semaphore objects, thus @code{sem_destroy} actually does nothing except
-checking that no thread is waiting on the semaphore.  This will change
-when process-shared semaphores are implemented.
-@end deftypefun
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_wait (sem_t * @var{sem})
-@code{sem_wait} suspends the calling thread until the semaphore pointed
-to by @var{sem} has non-zero count. It then atomically decreases the
-semaphore count.
-
-@code{sem_wait} is a cancellation point.  It always returns 0.
-@end deftypefun
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_trywait (sem_t * @var{sem})
-@code{sem_trywait} is a non-blocking variant of @code{sem_wait}. If the
-semaphore pointed to by @var{sem} has non-zero count, the count is
-atomically decreased and @code{sem_trywait} immediately returns 0.  If
-the semaphore count is zero, @code{sem_trywait} immediately returns -1
-and sets errno to @code{EAGAIN}.
-@end deftypefun
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_post (sem_t * @var{sem})
-@code{sem_post} atomically increases the count of the semaphore pointed to
-by @var{sem}. This function never blocks.
-
-@c !!! This para appears not to agree with the code.
-On processors supporting atomic compare-and-swap (Intel 486, Pentium and
-later, Alpha, PowerPC, MIPS II, Motorola 68k, Ultrasparc), the
-@code{sem_post} function is can safely be called from signal handlers.
-This is the only thread synchronization function provided by POSIX
-threads that is async-signal safe.  On the Intel 386 and earlier Sparc
-chips, the current LinuxThreads implementation of @code{sem_post} is not
-async-signal safe, because the hardware does not support the required
-atomic operations.
-
-@code{sem_post} always succeeds and returns 0, unless the semaphore
-count would exceed @code{SEM_VALUE_MAX} after being incremented.  In
-that case @code{sem_post} returns -1 and sets @var{errno} to
-@code{EINVAL}.  The semaphore count is left unchanged.
-@end deftypefun
-
-@comment semaphore.h
-@comment POSIX
-@deftypefun int sem_getvalue (sem_t * @var{sem}, int * @var{sval})
-@code{sem_getvalue} stores in the location pointed to by @var{sval} the
-current count of the semaphore @var{sem}.  It always returns 0.
-@end deftypefun
-
-@node Thread-Specific Data
-@section Thread-Specific Data
-
-Programs often need global or static variables that have different
-values in different threads. Since threads share one memory space, this
-cannot be achieved with regular variables. Thread-specific data is the
-POSIX threads answer to this need.
-
-Each thread possesses a private memory block, the thread-specific data
-area, or TSD area for short. This area is indexed by TSD keys. The TSD
-area associates values of type @code{void *} to TSD keys. TSD keys are
-common to all threads, but the value associated with a given TSD key can
-be different in each thread.
-
-For concreteness, the TSD areas can be viewed as arrays of @code{void *}
-pointers, TSD keys as integer indices into these arrays, and the value
-of a TSD key as the value of the corresponding array element in the
-calling thread.
-
-When a thread is created, its TSD area initially associates @code{NULL}
-with all keys.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_key_create (pthread_key_t *@var{key}, void (*destr_function) (void *))
-@code{pthread_key_create} allocates a new TSD key. The key is stored in
-the location pointed to by @var{key}. There is a limit of
-@code{PTHREAD_KEYS_MAX} on the number of keys allocated at a given
-time. The value initially associated with the returned key is
-@code{NULL} in all currently executing threads.
-
-The @var{destr_function} argument, if not @code{NULL}, specifies a
-destructor function associated with the key. When a thread terminates
-via @code{pthread_exit} or by cancellation, @var{destr_function} is
-called on the value associated with the key in that thread. The
-@var{destr_function} is not called if a key is deleted with
-@code{pthread_key_delete} or a value is changed with
-@code{pthread_setspecific}.  The order in which destructor functions are
-called at thread termination time is unspecified.
-
-Before the destructor function is called, the @code{NULL} value is
-associated with the key in the current thread.  A destructor function
-might, however, re-associate non-@code{NULL} values to that key or some
-other key.  To deal with this, if after all the destructors have been
-called for all non-@code{NULL} values, there are still some
-non-@code{NULL} values with associated destructors, then the process is
-repeated.  The LinuxThreads implementation stops the process after
-@code{PTHREAD_DESTRUCTOR_ITERATIONS} iterations, even if some
-non-@code{NULL} values with associated descriptors remain.  Other
-implementations may loop indefinitely.
-
-@code{pthread_key_create} returns 0 unless @code{PTHREAD_KEYS_MAX} keys
-have already been allocated, in which case it fails and returns
-@code{EAGAIN}.
-@end deftypefun
-
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_key_delete (pthread_key_t @var{key})
-@code{pthread_key_delete} deallocates a TSD key. It does not check
-whether non-@code{NULL} values are associated with that key in the
-currently executing threads, nor call the destructor function associated
-with the key.
-
-If there is no such key @var{key}, it returns @code{EINVAL}.  Otherwise
-it returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_setspecific (pthread_key_t @var{key}, const void *@var{pointer})
-@code{pthread_setspecific} changes the value associated with @var{key}
-in the calling thread, storing the given @var{pointer} instead.
-
-If there is no such key @var{key}, it returns @code{EINVAL}.  Otherwise
-it returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun {void *} pthread_getspecific (pthread_key_t @var{key})
-@code{pthread_getspecific} returns the value currently associated with
-@var{key} in the calling thread.
-
-If there is no such key @var{key}, it returns @code{NULL}.
-@end deftypefun
-
-The following code fragment allocates a thread-specific array of 100
-characters, with automatic reclaimation at thread exit:
-
-@smallexample
-/* Key for the thread-specific buffer */
-static pthread_key_t buffer_key;
-
-/* Once-only initialisation of the key */
-static pthread_once_t buffer_key_once = PTHREAD_ONCE_INIT;
-
-/* Allocate the thread-specific buffer */
-void buffer_alloc(void)
-@{
-  pthread_once(&buffer_key_once, buffer_key_alloc);
-  pthread_setspecific(buffer_key, malloc(100));
-@}
-
-/* Return the thread-specific buffer */
-char * get_buffer(void)
-@{
-  return (char *) pthread_getspecific(buffer_key);
-@}
-
-/* Allocate the key */
-static void buffer_key_alloc()
-@{
-  pthread_key_create(&buffer_key, buffer_destroy);
-@}
-
-/* Free the thread-specific buffer */
-static void buffer_destroy(void * buf)
-@{
-  free(buf);
-@}
-@end smallexample
-
-@node Threads and Signal Handling
-@section Threads and Signal Handling
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_sigmask (int @var{how}, const sigset_t *@var{newmask}, sigset_t *@var{oldmask})
-@code{pthread_sigmask} changes the signal mask for the calling thread as
-described by the @var{how} and @var{newmask} arguments. If @var{oldmask}
-is not @code{NULL}, the previous signal mask is stored in the location
-pointed to by @var{oldmask}.
-
-The meaning of the @var{how} and @var{newmask} arguments is the same as
-for @code{sigprocmask}. If @var{how} is @code{SIG_SETMASK}, the signal
-mask is set to @var{newmask}. If @var{how} is @code{SIG_BLOCK}, the
-signals specified to @var{newmask} are added to the current signal mask.
-If @var{how} is @code{SIG_UNBLOCK}, the signals specified to
-@var{newmask} are removed from the current signal mask.
-
-Recall that signal masks are set on a per-thread basis, but signal
-actions and signal handlers, as set with @code{sigaction}, are shared
-between all threads.
-
-The @code{pthread_sigmask} function returns 0 on success, and one of the
-following error codes on error:
-@table @code
-@item EINVAL
-@var{how} is not one of @code{SIG_SETMASK}, @code{SIG_BLOCK}, or @code{SIG_UNBLOCK}
-
-@item EFAULT
-@var{newmask} or @var{oldmask} point to invalid addresses
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_kill (pthread_t @var{thread}, int @var{signo})
-@code{pthread_kill} sends signal number @var{signo} to the thread
-@var{thread}.  The signal is delivered and handled as described in
-@ref{Signal Handling}.
-
-@code{pthread_kill} returns 0 on success, one of the following error codes
-on error:
-@table @code
-@item EINVAL
-@var{signo} is not a valid signal number
-
-@item ESRCH
-The thread @var{thread} does not exist (e.g. it has already terminated)
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int sigwait (const sigset_t *@var{set}, int *@var{sig})
-@code{sigwait} suspends the calling thread until one of the signals in
-@var{set} is delivered to the calling thread. It then stores the number
-of the signal received in the location pointed to by @var{sig} and
-returns. The signals in @var{set} must be blocked and not ignored on
-entrance to @code{sigwait}. If the delivered signal has a signal handler
-function attached, that function is @emph{not} called.
-
-@code{sigwait} is a cancellation point.  It always returns 0.
-@end deftypefun
-
-For @code{sigwait} to work reliably, the signals being waited for must be
-blocked in all threads, not only in the calling thread, since
-otherwise the POSIX semantics for signal delivery do not guarantee
-that it's the thread doing the @code{sigwait} that will receive the signal.
-The best way to achieve this is block those signals before any threads
-are created, and never unblock them in the program other than by
-calling @code{sigwait}.
-
-Signal handling in LinuxThreads departs significantly from the POSIX
-standard. According to the standard, ``asynchronous'' (external) signals
-are addressed to the whole process (the collection of all threads),
-which then delivers them to one particular thread. The thread that
-actually receives the signal is any thread that does not currently block
-the signal.
-
-In LinuxThreads, each thread is actually a kernel process with its own
-PID, so external signals are always directed to one particular thread.
-If, for instance, another thread is blocked in @code{sigwait} on that
-signal, it will not be restarted.
-
-The LinuxThreads implementation of @code{sigwait} installs dummy signal
-handlers for the signals in @var{set} for the duration of the
-wait. Since signal handlers are shared between all threads, other
-threads must not attach their own signal handlers to these signals, or
-alternatively they should all block these signals (which is recommended
-anyway).
-
-@node Threads and Fork
-@section Threads and Fork
-
-It's not intuitively obvious what should happen when a multi-threaded POSIX
-process calls @code{fork}. Not only are the semantics tricky, but you may
-need to write code that does the right thing at fork time even if that code
-doesn't use the @code{fork} function. Moreover, you need to be aware of
-interaction between @code{fork} and some library features like
-@code{pthread_once} and stdio streams.
-
-When @code{fork} is called by one of the threads of a process, it creates a new
-process which is copy of the  calling process. Effectively, in addition to
-copying certain system objects, the function takes a snapshot of the memory
-areas of the parent process, and creates identical areas in the child.
-To make matters more complicated, with threads it's possible for two or more
-threads to concurrently call fork to create two or more child processes.
-
-The child process has a copy of the address space of the parent, but it does
-not inherit any of its threads. Execution of the child process is carried out
-by a new thread which returns from @code{fork} function with a return value of
-zero; it is the only thread in the child process.  Because threads are not
-inherited across fork, issues arise. At the time of the call to @code{fork},
-threads in the parent process other than the one calling @code{fork} may have
-been executing critical regions of code.  As a result, the child process may
-get a copy of objects that are not in a well-defined state.  This potential
-problem affects all components of the program.
-
-Any program component which will continue being used in a child process must
-correctly handle its state during @code{fork}. For this purpose, the POSIX
-interface provides the special function @code{pthread_atfork} for installing
-pointers to handler functions which are called from within @code{fork}.
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_atfork (void (*@var{prepare})(void), void (*@var{parent})(void), void (*@var{child})(void))
-
-@code{pthread_atfork} registers handler functions to be called just
-before and just after a new process is created with @code{fork}. The
-@var{prepare} handler will be called from the parent process, just
-before the new process is created. The @var{parent} handler will be
-called from the parent process, just before @code{fork} returns. The
-@var{child} handler will be called from the child process, just before
-@code{fork} returns.
-
-@code{pthread_atfork} returns 0 on success and a non-zero error code on
-error.
-
-One or more of the three handlers @var{prepare}, @var{parent} and
-@var{child} can be given as @code{NULL}, meaning that no handler needs
-to be called at the corresponding point.
-
-@code{pthread_atfork} can be called several times to install several
-sets of handlers. At @code{fork} time, the @var{prepare} handlers are
-called in LIFO order (last added with @code{pthread_atfork}, first
-called before @code{fork}), while the @var{parent} and @var{child}
-handlers are called in FIFO order (first added, first called).
-
-If there is insufficient memory available to register the handlers,
-@code{pthread_atfork} fails and returns @code{ENOMEM}.  Otherwise it
-returns 0.
-
-The functions @code{fork} and @code{pthread_atfork} must not be regarded as
-reentrant from the context of the handlers.  That is to say, if a
-@code{pthread_atfork} handler invoked from within @code{fork} calls
-@code{pthread_atfork} or @code{fork}, the behavior is undefined.
-
-Registering a triplet of handlers is an atomic operation with respect to fork.
-If new handlers are registered at about the same time as a fork occurs, either
-all three handlers will be called, or none of them will be called.
-
-The handlers are inherited by the child process, and there is no
-way to remove them, short of using @code{exec} to load a new
-pocess image.
-
-@end deftypefun
-
-To understand the purpose of @code{pthread_atfork}, recall that
-@code{fork} duplicates the whole memory space, including mutexes in
-their current locking state, but only the calling thread: other threads
-are not running in the child process. Thus, if a mutex is locked by a
-thread other than the thread calling @code{fork}, that mutex will remain
-locked forever in the child process, possibly blocking the execution of
-the child process. Or if some shared data, such as a linked list, was in the
-middle of being updated by a thread in the parent process, the child
-will get a copy of the incompletely updated data which it cannot use.
-
-To avoid this, install handlers with @code{pthread_atfork} as follows: have the
-@var{prepare} handler lock the mutexes (in locking order), and the
-@var{parent} handler unlock the mutexes. The @var{child} handler should reset
-the mutexes using @code{pthread_mutex_init}, as well as any other
-synchronization objects such as condition variables.
-
-Locking the global mutexes before the fork ensures that all other threads are
-locked out of the critical regions of code protected by those mutexes.  Thus
-when @code{fork} takes a snapshot of the parent's address space, that snapshot
-will copy valid, stable data.  Resetting the synchronization objects in the
-child process will ensure they are properly cleansed of any artifacts from the
-threading subsystem of the parent process. For example, a mutex may inherit
-a wait queue of threads waiting for the lock; this wait queue makes no sense
-in the child process. Initializing the mutex takes care of this.
-
-@node Streams and Fork
-@section Streams and Fork
-
-The GNU standard I/O library has an internal mutex which guards the internal
-linked list of all standard C FILE objects. This mutex is properly taken care
-of during @code{fork} so that the child receives an intact copy of the list.
-This allows the @code{fopen} function, and related stream-creating functions,
-to work correctly in the child process, since these functions need to insert
-into the list.
-
-However, the individual stream locks are not completely taken care of.  Thus
-unless the multithreaded application takes special precautions in its use of
-@code{fork}, the child process might not be able to safely use the streams that
-it inherited from the parent.   In general, for any given open stream in the
-parent that is to be used by the child process, the application must ensure
-that that stream is not in use by another thread when @code{fork} is called.
-Otherwise an inconsistent copy of the stream object be produced. An easy way to
-ensure this is to use @code{flockfile} to lock the stream prior to calling
-@code{fork} and then unlock it with @code{funlockfile} inside the parent
-process, provided that the parent's threads properly honor these locks.
-Nothing special needs to be done in the child process, since the library
-internally resets all stream locks.
-
-Note that the stream locks are not shared between the parent and child.
-For example, even if you ensure that, say, the stream @code{stdout} is properly
-treated and can be safely used in the child, the stream locks do not provide
-an exclusion mechanism between the parent and child. If both processes write
-to @code{stdout}, strangely interleaved output may result regardless of
-the explicit use of @code{flockfile} or implicit locks.
-
-Also note that these provisions are a GNU extension; other systems might not
-provide any way for streams to be used in the child of a multithreaded process.
-POSIX requires that such a child process confines itself to calling only
-asynchronous safe functions, which excludes much of the library, including
-standard I/O.
-
-@node Miscellaneous Thread Functions
-@section Miscellaneous Thread Functions
-
-@comment pthread.h
-@comment POSIX
-@deftypefun {pthread_t} pthread_self (@var{void})
-@code{pthread_self} returns the thread identifier for the calling thread.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_equal (pthread_t thread1, pthread_t thread2)
-@code{pthread_equal} determines if two thread identifiers refer to the same
-thread.
-
-A non-zero value is returned if @var{thread1} and @var{thread2} refer to
-the same thread. Otherwise, 0 is returned.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_detach (pthread_t @var{th})
-@code{pthread_detach} puts the thread @var{th} in the detached
-state. This guarantees that the memory resources consumed by @var{th}
-will be freed immediately when @var{th} terminates. However, this
-prevents other threads from synchronizing on the termination of @var{th}
-using @code{pthread_join}.
-
-A thread can be created initially in the detached state, using the
-@code{detachstate} attribute to @code{pthread_create}. In contrast,
-@code{pthread_detach} applies to threads created in the joinable state,
-and which need to be put in the detached state later.
-
-After @code{pthread_detach} completes, subsequent attempts to perform
-@code{pthread_join} on @var{th} will fail. If another thread is already
-joining the thread @var{th} at the time @code{pthread_detach} is called,
-@code{pthread_detach} does nothing and leaves @var{th} in the joinable
-state.
-
-On success, 0 is returned. On error, one of the following codes is
-returned:
-@table @code
-@item ESRCH
-No thread could be found corresponding to that specified by @var{th}
-@item EINVAL
-The thread @var{th} is already in the detached state
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment GNU
-@deftypefun void pthread_kill_other_threads_np (@var{void})
-@code{pthread_kill_other_threads_np} is a non-portable LinuxThreads extension.
-It causes all threads in the program to terminate immediately, except
-the calling thread which proceeds normally. It is intended to be
-called just before a thread calls one of the @code{exec} functions,
-e.g. @code{execve}.
-
-Termination of the other threads is not performed through
-@code{pthread_cancel} and completely bypasses the cancellation
-mechanism. Hence, the current settings for cancellation state and
-cancellation type are ignored, and the cleanup handlers are not
-executed in the terminated threads.
-
-According to POSIX 1003.1c, a successful @code{exec*} in one of the
-threads should automatically terminate all other threads in the program.
-This behavior is not yet implemented in LinuxThreads.  Calling
-@code{pthread_kill_other_threads_np} before @code{exec*} achieves much
-of the same behavior, except that if @code{exec*} ultimately fails, then
-all other threads are already killed.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_once (pthread_once_t *once_@var{control}, void (*@var{init_routine}) (void))
-
-The purpose of @code{pthread_once} is to ensure that a piece of
-initialization code is executed at most once. The @var{once_control}
-argument points to a static or extern variable statically initialized
-to @code{PTHREAD_ONCE_INIT}.
-
-The first time @code{pthread_once} is called with a given
-@var{once_control} argument, it calls @var{init_routine} with no
-argument and changes the value of the @var{once_control} variable to
-record that initialization has been performed. Subsequent calls to
-@code{pthread_once} with the same @code{once_control} argument do
-nothing.
-
-If a thread is cancelled while executing @var{init_routine}
-the state of the @var{once_control} variable is reset so that
-a future call to @code{pthread_once} will call the routine again.
-
-If the process forks while one or more threads are executing
-@code{pthread_once} initialization routines, the states of their respective
-@var{once_control} variables will appear to be reset in the child process so
-that if the child calls @code{pthread_once}, the routines will be executed.
-
-@code{pthread_once} always returns 0.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_setschedparam (pthread_t target_@var{thread}, int @var{policy}, const struct sched_param *@var{param})
-
-@code{pthread_setschedparam} sets the scheduling parameters for the
-thread @var{target_thread} as indicated by @var{policy} and
-@var{param}. @var{policy} can be either @code{SCHED_OTHER} (regular,
-non-realtime scheduling), @code{SCHED_RR} (realtime, round-robin) or
-@code{SCHED_FIFO} (realtime, first-in first-out). @var{param} specifies
-the scheduling priority for the two realtime policies.  See
-@code{sched_setpolicy} for more information on scheduling policies.
-
-The realtime scheduling policies @code{SCHED_RR} and @code{SCHED_FIFO}
-are available only to processes with superuser privileges.
-
-On success, @code{pthread_setschedparam} returns 0.  On error it returns
-one of the following codes:
-@table @code
-@item EINVAL
-@var{policy} is not one of @code{SCHED_OTHER}, @code{SCHED_RR},
-@code{SCHED_FIFO}, or the priority value specified by @var{param} is not
-valid for the specified policy
-
-@item EPERM
-Realtime scheduling was requested but the calling process does not have
-sufficient privileges.
-
-@item ESRCH
-The @var{target_thread} is invalid or has already terminated
-
-@item EFAULT
-@var{param} points outside the process memory space
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_getschedparam (pthread_t target_@var{thread}, int *@var{policy}, struct sched_param *@var{param})
-
-@code{pthread_getschedparam} retrieves the scheduling policy and
-scheduling parameters for the thread @var{target_thread} and stores them
-in the locations pointed to by @var{policy} and @var{param},
-respectively.
-
-@code{pthread_getschedparam} returns 0 on success, or one of the
-following error codes on failure:
-@table @code
-@item ESRCH
-The @var{target_thread} is invalid or has already terminated.
-
-@item EFAULT
-@var{policy} or @var{param} point outside the process memory space.
-
-@end table
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_setconcurrency (int @var{level})
-@code{pthread_setconcurrency} is unused in LinuxThreads due to the lack
-of a mapping of user threads to kernel threads.  It exists for source
-compatibility.  It does store the value @var{level} so that it can be
-returned by a subsequent call to @code{pthread_getconcurrency}.  It takes
-no other action however.
-@end deftypefun
-
-@comment pthread.h
-@comment POSIX
-@deftypefun int pthread_getconcurrency ()
-@code{pthread_getconcurrency} is unused in LinuxThreads due to the lack
-of a mapping of user threads to kernel threads.  It exists for source
-compatibility.  However, it will return the value that was set by the
-last call to @code{pthread_setconcurrency}.
-@end deftypefun
-
diff --git a/newlib/libc/sys/linux/linuxthreads/lockfile.c b/newlib/libc/sys/linux/linuxthreads/lockfile.c
deleted file mode 100644
index 0aeb15086..000000000
--- a/newlib/libc/sys/linux/linuxthreads/lockfile.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* lockfile - Handle locking and unlocking of stream.
-   Copyright (C) 1996, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <sys/lock.h>
-#include <stdio.h>
-#include <pthread.h>
-#include "internals.h"
-
-#ifdef USE_IN_LIBIO
-#include "../libio/libioP.h"
-#endif
-
-#ifndef SHARED
-/* We need a hook to force this file to be linked in when static
-   libpthread is used.  */
-const int __pthread_provide_lockfile = 0;
-#endif
-
-void
-__flockfile (FILE *stream)
-{
-  __lock_acquire_recursive (*(_LOCK_RECURSIVE_T *)&stream->_lock);
-}
-#undef _IO_flockfile
-strong_alias (__flockfile, _IO_flockfile)
-weak_alias (__flockfile, flockfile);
-
-
-void
-__funlockfile (FILE *stream)
-{
-  __lock_release_recursive (*(_LOCK_RECURSIVE_T *)&stream->_lock);
-}
-#undef _IO_funlockfile
-strong_alias (__funlockfile, _IO_funlockfile)
-weak_alias (__funlockfile, funlockfile);
-
-
-int
-__ftrylockfile (FILE *stream)
-{
-  return __lock_try_acquire_recursive (*(_LOCK_RECURSIVE_T *)&stream->_lock);
-}
-strong_alias (__ftrylockfile, _IO_ftrylockfile)
-weak_alias (__ftrylockfile, ftrylockfile);
-
-void
-__flockfilelist(void)
-{
-#ifdef USE_IN_LIBIO
-  _IO_list_lock();
-#endif
-}
-
-void
-__funlockfilelist(void)
-{
-#ifdef USE_IN_LIBIO
-  _IO_list_unlock();
-#endif
-}
-
-void
-__fresetlockfiles (void)
-{
-#ifdef USE_IN_LIBIO
-  _IO_ITER i;
-
-  pthread_mutexattr_t attr;
-
-  __pthread_mutexattr_init (&attr);
-  __pthread_mutexattr_settype (&attr, PTHREAD_MUTEX_RECURSIVE_NP);
-
-  for (i = _IO_iter_begin(); i != _IO_iter_end(); i = _IO_iter_next(i))
-    __pthread_mutex_init (_IO_iter_file(i)->_lock, &attr);
-
-  __pthread_mutexattr_destroy (&attr);
-
-  _IO_list_resetlock();
-#endif
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/Makefile.am b/newlib/libc/sys/linux/linuxthreads/machine/Makefile.am
deleted file mode 100644
index 27c348c3b..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/Makefile.am
+++ /dev/null
@@ -1,10 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-doc:
-
-ACLOCAL_AMFLAGS = -I ../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/Makefile.in b/newlib/libc/sys/linux/linuxthreads/machine/Makefile.in
deleted file mode 100644
index 52a2b60ea..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/Makefile.in
+++ /dev/null
@@ -1,356 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-ACLOCAL_AMFLAGS = -I ../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../../../acinclude.m4 ../../../../../aclocal.m4 \
-		../../../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/aclocal.m4 b/newlib/libc/sys/linux/linuxthreads/machine/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/configure b/newlib/libc/sys/linux/linuxthreads/machine/configure
deleted file mode 100755
index 5dd19e50e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/configure
+++ /dev/null
@@ -1,3430 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=i386
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../../../.. $srcdir/../../../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../../../.. $srcdir/../../../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1663: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1693: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1744: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1787 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1818: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1823: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1851: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1894: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1924: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1927: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1962: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1979: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1991: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2029: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2050: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2223: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2253: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2315: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2386: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2418: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2453: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2485: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2552 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2590: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2603 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2640: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2672: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2707: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2739: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2774: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2806: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2842: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2847 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2876: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-if test -n "${machine_dir}"; then
-  subdirs="${machine_dir}"
-
-fi
-
-
-
-if test x${machine_dir} != x; then
-  HAVE_MACHINE_DIR_TRUE=
-  HAVE_MACHINE_DIR_FALSE='#'
-else
-  HAVE_MACHINE_DIR_TRUE='#'
-  HAVE_MACHINE_DIR_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@HAVE_MACHINE_DIR_TRUE@%$HAVE_MACHINE_DIR_TRUE%g
-s%@HAVE_MACHINE_DIR_FALSE@%$HAVE_MACHINE_DIR_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${machine_dir}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/configure.in b/newlib/libc/sys/linux/linuxthreads/machine/configure.in
deleted file mode 100644
index b2a205ed7..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/configure.in
+++ /dev/null
@@ -1,26 +0,0 @@
-dnl This is the newlib/libc/sys configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(i386)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../../../..)
-
-NEWLIB_CONFIGURE(../../../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-if test -n "${machine_dir}"; then
-  AC_CONFIG_SUBDIRS(${machine_dir})
-fi
-
-AM_CONDITIONAL(HAVE_MACHINE_DIR, test x${machine_dir} != x)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/generic/generic-sysdep.h b/newlib/libc/sys/linux/linuxthreads/machine/generic/generic-sysdep.h
deleted file mode 100644
index 27f5b6988..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/generic/generic-sysdep.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Generic asm macros used on many machines.
-   Copyright (C) 1991, 92, 93, 96, 98 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <config.h>
-#include <libc-symbols.h>
-
-#ifndef C_LABEL
-
-/* Define a macro we can use to construct the asm name for a C symbol.  */
-#ifdef	NO_UNDERSCORES
-#ifdef	__STDC__
-#define C_LABEL(name)		name##:
-#else
-#define C_LABEL(name)		name/**/:
-#endif
-#else
-#ifdef	__STDC__
-#define C_LABEL(name)		_##name##:
-#else
-#define C_LABEL(name)		_/**/name/**/:
-#endif
-#endif
-
-#endif
-
-/* Mark the end of function named SYM.  This is used on some platforms
-   to generate correct debugging information.  */
-#ifndef END
-#define END(sym)
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.am b/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.am
deleted file mode 100644
index d7271e5a6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.am
+++ /dev/null
@@ -1,26 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../../../include -I$(srcdir)/../.. -I$(srcdir)/../generic -I$(srcdir)/../../.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = clone.S i386-sysdep.S pspinlock.c sysdep.S
-
-liblinuxthreadsi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = liblinuxthreadsi386.la
-liblinuxthreadsi386_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../../../Makefile.shared
-
-AM_CFLAGS = -D_XOPEN_SOURCE=600 -D_GNU_SOURCE=1
-
-ACLOCAL_AMFLAGS = -I ../../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.in b/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.in
deleted file mode 100644
index 0485e6bc8..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.in
+++ /dev/null
@@ -1,411 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../../../include -I$(srcdir)/../.. -I$(srcdir)/../generic -I$(srcdir)/../../.. $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = clone.S i386-sysdep.S pspinlock.c sysdep.S
-
-liblinuxthreadsi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@liblinuxthreadsi386.la
-@USE_LIBTOOL_TRUE@liblinuxthreadsi386_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-AM_CFLAGS = -D_XOPEN_SOURCE=600 -D_GNU_SOURCE=1
-
-ACLOCAL_AMFLAGS = -I ../../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  clone.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@i386-sysdep.$(OBJEXT) pspinlock.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysdep.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-liblinuxthreadsi386_la_LIBADD = 
-@USE_LIBTOOL_TRUE@liblinuxthreadsi386_la_OBJECTS =  clone.lo \
-@USE_LIBTOOL_TRUE@i386-sysdep.lo pspinlock.lo sysdep.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(liblinuxthreadsi386_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(liblinuxthreadsi386_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../../../../acinclude.m4 \
-		../../../../../../aclocal.m4 \
-		../../../../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-liblinuxthreadsi386.la: $(liblinuxthreadsi386_la_OBJECTS) $(liblinuxthreadsi386_la_DEPENDENCIES)
-	$(LINK)  $(liblinuxthreadsi386_la_LDFLAGS) $(liblinuxthreadsi386_la_OBJECTS) $(liblinuxthreadsi386_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/aclocal.m4 b/newlib/libc/sys/linux/linuxthreads/machine/i386/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/bp-asm.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/bp-asm.h
deleted file mode 100644
index 34d5227a6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/bp-asm.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* Bounded-pointer definitions for x86 assembler.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   Contributed by Greg McGary <greg@mcgary.org>
-   This file is part of the GNU C Library.  Its master source is NOT part of
-   the C library, however.  The master source lives in the GNU MP Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _bp_asm_h_
-# define _bp_asm_h_ 1
-
-# if __ASSEMBLER__
-
-#  if __BOUNDED_POINTERS__
-
-/* Bounded pointers occupy three words.  */
-#   define PTR_SIZE 12
-/* Bounded pointer return values are passed back through a hidden
-   argument that points to caller-allocate space.  The hidden arg
-   occupies one word on the stack.  */
-#   define RTN_SIZE 4
-/* Although the caller pushes the hidden arg, the callee is
-   responsible for popping it.  */
-#   define RET_PTR ret $RTN_SIZE
-/* Maintain frame pointer chain in leaf assembler functions for the benefit
-   of debugging stack traces when bounds violations occur.  */
-#   define ENTER pushl %ebp; movl %esp, %ebp
-#   define LEAVE movl %ebp, %esp; popl %ebp
-/* Stack space overhead of procedure-call linkage: return address and
-   frame pointer.  */
-#   define LINKAGE 8
-/* Stack offset of return address after calling ENTER.  */
-#   define PCOFF 4
-
-/* Int 5 is the "bound range" exception also raised by the "bound"
-   instruction.  */
-#   define BOUNDS_VIOLATED int $5
-
-#   define CHECK_BOUNDS_LOW(VAL_REG, BP_MEM)	\
-	cmpl 4+BP_MEM, VAL_REG;			\
-	jae 0f; /* continue if value >= low */	\
-	BOUNDS_VIOLATED;			\
-    0:
-
-#   define CHECK_BOUNDS_HIGH(VAL_REG, BP_MEM, Jcc)	\
-	cmpl 8+BP_MEM, VAL_REG;				\
-	Jcc 0f; /* continue if value < high */		\
-	BOUNDS_VIOLATED;				\
-    0:
-
-#   define CHECK_BOUNDS_BOTH(VAL_REG, BP_MEM)	\
-	cmpl 4+BP_MEM, VAL_REG;			\
-	jb 1f; /* die if value < low */		\
-    	cmpl 8+BP_MEM, VAL_REG;			\
-	jb 0f; /* continue if value < high */	\
-    1:	BOUNDS_VIOLATED;			\
-    0:
-
-#   define CHECK_BOUNDS_BOTH_WIDE(VAL_REG, BP_MEM, LENGTH)	\
-	CHECK_BOUNDS_LOW(VAL_REG, BP_MEM);			\
-	addl LENGTH, VAL_REG;					\
-    	cmpl 8+BP_MEM, VAL_REG;					\
-	jbe 0f; /* continue if value <= high */			\
-	BOUNDS_VIOLATED;					\
-    0:	subl LENGTH, VAL_REG /* restore value */
-
-/* Take bounds from BP_MEM and affix them to the pointer
-   value in %eax, stuffing all into memory at RTN(%esp).
-   Use %edx as a scratch register.  */
-
-#   define RETURN_BOUNDED_POINTER(BP_MEM)	\
-	movl RTN(%esp), %edx;			\
-	movl %eax, 0(%edx);			\
-	movl 4+BP_MEM, %eax;			\
-	movl %eax, 4(%edx);			\
-	movl 8+BP_MEM, %eax;			\
-	movl %eax, 8(%edx)
-
-#   define RETURN_NULL_BOUNDED_POINTER		\
-	movl RTN(%esp), %edx;			\
-	movl %eax, 0(%edx);			\
-	movl %eax, 4(%edx);			\
-	movl %eax, 8(%edx)
-
-/* The caller of __errno_location is responsible for allocating space
-   for the three-word BP return-value and passing pushing its address
-   as an implicit first argument.  */
-#   define PUSH_ERRNO_LOCATION_RETURN		\
-	subl $8, %esp;				\
-	subl $4, %esp;				\
-	pushl %esp
-
-/* __errno_location is responsible for popping the implicit first
-   argument, but we must pop the space for the BP itself.  We also
-   dereference the return value in order to dig out the pointer value.  */
-#   define POP_ERRNO_LOCATION_RETURN		\
-	popl %eax;				\
-	addl $8, %esp
-
-#  else /* !__BOUNDED_POINTERS__ */
-
-/* Unbounded pointers occupy one word.  */
-#   define PTR_SIZE 4
-/* Unbounded pointer return values are passed back in the register %eax.  */
-#   define RTN_SIZE 0
-/* Use simple return instruction for unbounded pointer values.  */
-#   define RET_PTR ret
-/* Don't maintain frame pointer chain for leaf assembler functions.  */
-#   define ENTER
-#   define LEAVE
-/* Stack space overhead of procedure-call linkage: return address only.  */
-#   define LINKAGE 4
-/* Stack offset of return address after calling ENTER.  */
-#   define PCOFF 0
-
-#   define CHECK_BOUNDS_LOW(VAL_REG, BP_MEM)
-#   define CHECK_BOUNDS_HIGH(VAL_REG, BP_MEM, Jcc)
-#   define CHECK_BOUNDS_BOTH(VAL_REG, BP_MEM)
-#   define CHECK_BOUNDS_BOTH_WIDE(VAL_REG, BP_MEM, LENGTH)
-#   define RETURN_BOUNDED_POINTER(BP_MEM)
-
-#   define RETURN_NULL_BOUNDED_POINTER
-
-#   define PUSH_ERRNO_LOCATION_RETURN
-#   define POP_ERRNO_LOCATION_RETURN
-
-#  endif /* !__BOUNDED_POINTERS__ */
-
-# endif /* __ASSEMBLER__ */
-
-#endif /* _bp_asm_h_ */
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/clone.S b/newlib/libc/sys/linux/linuxthreads/machine/i386/clone.S
deleted file mode 100644
index dd00c2fb5..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/clone.S
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@tamu.edu)
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* clone() is even more special than fork() as it mucks with stacks
-   and invokes a function in the right context after its all over.  */
-
-#include <sysdep.h>
-#define _ERRNO_H	1
-#include <bits/errno.h>
-#include <asm/unistd.h>
-#include <bp-sym.h>
-#include <bp-asm.h>
-
-/* int clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg); */
-
-#define PARMS	LINKAGE		/* no space for saved regs */
-#define FUNC	PARMS
-#define STACK	FUNC+4
-#define FLAGS	STACK+PTR_SIZE
-#define ARG	FLAGS+4
-
-        .text
-ENTRY (BP_SYM (__clone))
-	/* Sanity check arguments.  */
-	movl	$-EINVAL,%eax
-	movl	FUNC(%esp),%ecx		/* no NULL function pointers */
-#ifdef PIC
-	jecxz	SYSCALL_ERROR_LABEL
-#else
-	testl	%ecx,%ecx
-	jz	SYSCALL_ERROR_LABEL
-#endif
-	movl	STACK(%esp),%ecx	/* no NULL stack pointers */
-#ifdef PIC
-	jecxz	SYSCALL_ERROR_LABEL
-#else
-	testl	%ecx,%ecx
-	jz	SYSCALL_ERROR_LABEL
-#endif
-
-	/* Insert the argument onto the new stack.  */
-	subl	$8,%ecx
-	movl	ARG(%esp),%eax		/* no negative argument counts */
-	movl	%eax,4(%ecx)
-
-	/* Save the function pointer as the zeroth argument.
-	   It will be popped off in the child in the ebx frobbing below.  */
-	movl	FUNC(%esp),%eax
-	movl	%eax,0(%ecx)
-
-	/* Do the system call */
-	pushl	%ebx
-	movl	FLAGS+4(%esp),%ebx
-	movl	$SYS_ify(clone),%eax
-	int	$0x80
-	popl	%ebx
-
-	test	%eax,%eax
-	jl	SYSCALL_ERROR_LABEL
-	jz	thread_start
-
-L(pseudo_end):
-	ret
-
-thread_start:
-	subl	%ebp,%ebp	/* terminate the stack frame */
-	call	*%ebx
-#ifdef PIC
-	call	L(here)
-L(here):
-	popl	%ebx
-	addl	$_GLOBAL_OFFSET_TABLE_+[.-L(here)], %ebx
-#endif
-	pushl	%eax
-	call	JUMPTARGET (_exit)
-
-PSEUDO_END (BP_SYM (__clone))
-
-weak_alias (BP_SYM (__clone), BP_SYM (clone))
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure b/newlib/libc/sys/linux/linuxthreads/machine/i386/configure
deleted file mode 100755
index 310e8b3aa..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure
+++ /dev/null
@@ -1,3351 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=pspinlock.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../../../../.. $srcdir/../../../../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../../../../.. $srcdir/../../../../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../../../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-for ac_prog in mawk gawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@AWK@%$AWK%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.in b/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.in
deleted file mode 100644
index bdf1a587f..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.in
+++ /dev/null
@@ -1,22 +0,0 @@
-dnl This is the newlib/libc/sys/linux/linuxthreads/machine/i386 configure file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(pspinlock.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../../../../..)
-
-NEWLIB_CONFIGURE(../../../../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-AC_PROG_AWK
-fi
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S b/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S
deleted file mode 100644
index aec21c0f5..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 2000 Free Software Foundation, Inc.
-   This file has been modified from the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <sysdep.h>
-#define _ERRNO_H
-#include <bits/errno.h>
-#include <bp-asm.h>
-#include <bp-sym.h>
-
-.globl __syscall_error
-
-__syscall_error:
-#if defined (EWOULDBLOCK_sys) && EWOULDBLOCK_sys != EAGAIN
-	/* We translate the system's EWOULDBLOCK error into EAGAIN.
-	   The GNU C library always defines EWOULDBLOCK==EAGAIN.
-	   EWOULDBLOCK_sys is the original number.  */
-	cmpl $EWOULDBLOCK_sys, %eax /* Is it the old EWOULDBLOCK?  */
-	jne notb		/* Branch if not.  */
-	movl $EAGAIN, %eax	/* Yes; translate it to EAGAIN.  */
-notb:
-#endif
-#ifndef	PIC
-	pushl %eax
-	PUSH_ERRNO_LOCATION_RETURN
-	call BP_SYM (__errno)
-	POP_ERRNO_LOCATION_RETURN
-	popl %ecx
-	movl %ecx, (%eax)
-#else
-	/* The caller has pushed %ebx and then set it up to
-	   point to the GOT before calling us through the PLT.  */
-	pushl %eax
-	PUSH_ERRNO_LOCATION_RETURN
-	call C_SYMBOL_NAME (BP_SYM (__errno)@PLT)
-	POP_ERRNO_LOCATION_RETURN
-	popl %ecx
-	/* Pop %ebx value saved before jumping here.  */
-	popl %ebx
-	movl %ecx, (%eax)
-#endif
-	movl $-1, %eax
-	ret
-
-#undef	__syscall_error
-END (__syscall_error)
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h
deleted file mode 100644
index 02b4c19af..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* Assembler macros for i386.
-   Copyright (C) 1991, 92, 93, 95, 96, 98 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define NO_UNDERSCORES
-
-#include <generic-sysdep.h>
-
-#ifdef	__ASSEMBLER__
-
-/* Syntactic details of assembler.  */
-
-#ifdef HAVE_ELF
-
-/* ELF uses byte-counts for .align, most others use log2 of count of bytes.  */
-#define ALIGNARG(log2) 1<<log2
-/* For ELF we need the `.type' directive to make shared libs work right.  */
-#define ASM_TYPE_DIRECTIVE(name,typearg) .type name,typearg;
-#define ASM_SIZE_DIRECTIVE(name) .size name,.-name;
-
-/* In ELF C symbols are asm symbols.  */
-#undef	NO_UNDERSCORES
-#define NO_UNDERSCORES
-
-#else
-
-#define ALIGNARG(log2) log2
-#define ASM_TYPE_DIRECTIVE(name,type)	/* Nothing is specified.  */
-#define ASM_SIZE_DIRECTIVE(name)	/* Nothing is specified.  */
-
-#endif
-
-
-/* Define an entry point visible from C.
-
-   There is currently a bug in gdb which prevents us from specifying
-   incomplete stabs information.  Fake some entries here which specify
-   the current source file.  */
-#define	ENTRY(name)							      \
-  STABS_CURRENT_FILE1("")						      \
-  STABS_CURRENT_FILE(name)						      \
-  ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME(name);				      \
-  ASM_TYPE_DIRECTIVE (C_SYMBOL_NAME(name),@function)			      \
-  .align ALIGNARG(4);							      \
-  STABS_FUN(name)							      \
-  C_LABEL(name)								      \
-  CALL_MCOUNT
-
-#undef	END
-#define END(name)							      \
-  ASM_SIZE_DIRECTIVE(name)						      \
-  STABS_FUN_END(name)
-
-/* Remove the following two lines once the gdb bug is fixed.  */
-#define STABS_CURRENT_FILE(name)					      \
-  STABS_CURRENT_FILE1 (#name)
-#define STABS_CURRENT_FILE1(name)					      \
-  1: .stabs name,100,0,0,1b;
-/* Emit stabs definition lines.  We use F(0,1) and define t(0,1) as `int',
-   the same way gcc does it.  */
-#define STABS_FUN(name) STABS_FUN2(name, name##:F(0,1))
-#define STABS_FUN2(name, namestr)					      \
-  .stabs "int:t(0,1)=r(0,1);-2147483648;2147483647;",128,0,0,0;		      \
-  .stabs #namestr,36,0,0,name;
-#define STABS_FUN_END(name)						      \
-  1: .stabs "",36,0,0,1b-name;
-
-/* If compiled for profiling, call `mcount' at the start of each function.  */
-#ifdef	PROF
-/* The mcount code relies on a normal frame pointer being on the stack
-   to locate our caller, so push one just for its benefit.  */
-#define CALL_MCOUNT \
-  pushl %ebp; movl %esp, %ebp; call JUMPTARGET(mcount); popl %ebp;
-#else
-#define CALL_MCOUNT		/* Do nothing.  */
-#endif
-
-#ifdef	NO_UNDERSCORES
-/* Since C identifiers are not normally prefixed with an underscore
-   on this system, the asm identifier `syscall_error' intrudes on the
-   C name space.  Make sure we use an innocuous name.  */
-#define	syscall_error	__syscall_error
-#define mcount		_mcount
-#endif
-
-#define	PSEUDO(name, syscall_name, args)				      \
-lose: SYSCALL_PIC_SETUP							      \
-  jmp JUMPTARGET(syscall_error)						      \
-  .globl syscall_error;							      \
-  ENTRY (name)								      \
-  DO_CALL (syscall_name, args);						      \
-  jb lose
-
-#undef	PSEUDO_END
-#define	PSEUDO_END(name)						      \
-  END (name)
-
-#ifdef PIC
-#define JUMPTARGET(name)	name##@PLT
-#define SYSCALL_PIC_SETUP \
-    pushl %ebx;								      \
-    call 0f;								      \
-0:  popl %ebx;								      \
-    addl $_GLOBAL_OFFSET_TABLE+[.-0b], %ebx;
-#else
-#define JUMPTARGET(name)	name
-#define SYSCALL_PIC_SETUP	/* Nothing.  */
-#endif
-
-/* Local label name for asm code. */
-#ifndef L
-#define L(name)		name
-#endif
-
-#endif	/* __ASSEMBLER__ */
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/pspinlock.c b/newlib/libc/sys/linux/linuxthreads/machine/i386/pspinlock.c
deleted file mode 100644
index 5d242388a..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/pspinlock.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* POSIX spinlock implementation.  x86 version.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include "internals.h"
-
-/* This implementation is similar to the one used in the Linux kernel.
-   But the kernel is byte instructions for the memory access.  This is
-   faster but unusable here.  The problem is that only 128
-   threads/processes could use the spinlock at the same time.  If (by
-   a design error in the program) a thread/process would hold the
-   spinlock for a time long enough to accumulate 128 waiting
-   processes, the next one will find a positive value in the spinlock
-   and assume it is unlocked.  We cannot accept that.  */
-
-int
-__pthread_spin_lock (pthread_spinlock_t *lock)
-{
-  asm volatile
-    ("\n"
-     "1:\n\t"
-     "lock; decl %0\n\t"
-     "js 2f\n\t"
-     ".section .text.spinlock,\"ax\"\n"
-     "2:\n\t"
-     "cmpl $0,%0\n\t"
-     "rep; nop\n\t"
-     "jle 2b\n\t"
-     "jmp 1b\n\t"
-     ".previous"
-     : "=m" (*lock));
-  return 0;
-}
-weak_alias (__pthread_spin_lock, pthread_spin_lock)
-
-
-int
-__pthread_spin_trylock (pthread_spinlock_t *lock)
-{
-  int oldval;
-
-  asm volatile
-    ("xchgl %0,%1"
-     : "=r" (oldval), "=m" (*lock)
-     : "0" (0));
-  return oldval > 0 ? 0 : EBUSY;
-}
-weak_alias (__pthread_spin_trylock, pthread_spin_trylock)
-
-
-int
-__pthread_spin_unlock (pthread_spinlock_t *lock)
-{
-  asm volatile
-    ("movl $1,%0"
-     : "=m" (*lock));
-  return 0;
-}
-weak_alias (__pthread_spin_unlock, pthread_spin_unlock)
-
-
-int
-__pthread_spin_init (pthread_spinlock_t *lock, int pshared)
-{
-  /* We can ignore the `pshared' parameter.  Since we are busy-waiting
-     all processes which can access the memory location `lock' points
-     to can use the spinlock.  */
-  *lock = 1;
-  return 0;
-}
-weak_alias (__pthread_spin_init, pthread_spin_init)
-
-
-int
-__pthread_spin_destroy (pthread_spinlock_t *lock)
-{
-  /* Nothing to do.  */
-  return 0;
-}
-weak_alias (__pthread_spin_destroy, pthread_spin_destroy)
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/pt-machine.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/pt-machine.h
deleted file mode 100644
index 3346bcc34..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/pt-machine.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Machine-dependent pthreads configuration and inline functions.
-   i386 version.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson <rth@tamu.edu>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef PT_EI
-# define PT_EI extern inline
-#endif
-
-/* Get some notion of the current stack.  Need not be exactly the top
-   of the stack, just something somewhere in the current frame.  */
-#define CURRENT_STACK_FRAME  __builtin_frame_address (0)
-
-
-/* Spinlock implementation; required.  */
-PT_EI long int
-testandset (int *spinlock)
-{
-  long int ret;
-
-  __asm__ __volatile__(
-       "xchgl %0, %1"
-       : "=r"(ret), "=m"(*spinlock)
-       : "0"(1), "m"(*spinlock)
-       : "memory");
-
-  return ret;
-}
-
-
-/* Compare-and-swap for semaphores.
-   Available on the 486 and above, but not on the 386.
-   We test dynamically whether it's available or not. */
-
-#define HAS_COMPARE_AND_SWAP
-#define TEST_FOR_COMPARE_AND_SWAP
-
-PT_EI int
-__compare_and_swap (long int *p, long int oldval, long int newval)
-{
-  char ret;
-  long int readval;
-
-  __asm__ __volatile__ ("lock; cmpxchgl %3, %1; sete %0"
-			: "=q" (ret), "=m" (*p), "=a" (readval)
-			: "r" (newval), "m" (*p), "a" (oldval)
-			: "memory");
-  return ret;
-}
-
-
-PT_EI int
-get_eflags (void)
-{
-  int res;
-  __asm__ __volatile__ ("pushfl; popl %0" : "=r" (res) : );
-  return res;
-}
-
-
-PT_EI void
-set_eflags (int newflags)
-{
-  __asm__ __volatile__ ("pushl %0; popfl" : : "r" (newflags) : "cc");
-}
-
-
-PT_EI int
-compare_and_swap_is_available (void)
-{
-  int oldflags = get_eflags ();
-  int changed;
-  /* Flip AC bit in EFLAGS.  */
-  set_eflags (oldflags ^ 0x40000);
-  /* See if bit changed.  */
-  changed = (get_eflags () ^ oldflags) & 0x40000;
-  /* Restore EFLAGS.  */
-  set_eflags (oldflags);
-  /* If the AC flag did not change, it's a 386 and it lacks cmpxchg.
-     Otherwise, it's a 486 or above and it has cmpxchg.  */
-  return changed != 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h
deleted file mode 100644
index 6530ba6f3..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define SIGCONTEXT struct sigcontext
-#define SIGCONTEXT_EXTRA_ARGS
-#define GET_PC(ctx)	((void *) ctx.eip)
-#define GET_FRAME(ctx)	((void *) ctx.ebp)
-#define GET_STACK(ctx)	((void *) ctx.esp_at_signal)
-#define CALL_SIGHANDLER(handler, signo, ctx) \
-do {									      \
-  int __tmp1, __tmp2, __tmp3, __tmp4;					      \
-  __asm __volatile ("movl\t%%esp, %%edi\n\t"				      \
-		    "andl\t$-16, %%esp\n\t"				      \
-		    "subl\t%8, %%esp\n\t"				      \
-		    "movl\t%%edi, %c8-4(%%esp)\n\t"			      \
-		    "movl\t%1, 0(%%esp)\n\t"				      \
-		    "leal\t4(%%esp), %%edi\n\t"				      \
-		    "cld\n\t"						      \
-		    "rep\tmovsl\n\t"					      \
-		    "call\t*%0\n\t"					      \
-		    "cld\n\t"						      \
-		    "movl\t%9, %%ecx\n\t"				      \
-		    "subl\t%%edi, %%esi\n\t"				      \
-		    "leal\t4(%%esp,%%esi,1), %%edi\n\t"			      \
-		    "leal\t4(%%esp), %%esi\n\t"				      \
-		    "rep\tmovsl\n\t"					      \
-		    "movl\t%c8-4(%%esp), %%esp\n\t"			      \
-		    : "=a" (__tmp1), "=d" (__tmp2), "=S" (__tmp3),	      \
-		      "=c" (__tmp4)					      \
-		    : "0" (handler), "1" (signo), "2" (&ctx),		      \
-		      "3" (sizeof (struct sigcontext) / 4),		      \
-		      "n" ((sizeof (struct sigcontext) + 19) & ~15),	      \
-		      "i" (sizeof (struct sigcontext) / 4)		      \
-		    : "cc", "edi");					      \
-} while (0)
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/stackinfo.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/stackinfo.h
deleted file mode 100644
index a9a6745aa..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/stackinfo.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This file contains a bit of information about the stack allocation
-   of the processor.  */
-
-#ifndef _STACKINFO_H
-#define _STACKINFO_H	1
-
-/* On x86 the stack grows down.  */
-#define _STACK_GROWS_DOWN	1
-
-#endif	/* stackinfo.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.S b/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.S
deleted file mode 100644
index f219805a8..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <sysdep.h>
-
-/* The following code is only used in the shared library when we
-   compile the reentrant version.  Otherwise each system call defines
-   each own version.  */
-
-#ifndef PIC
-
-/* The syscall stubs jump here when they detect an error.
-   The code for Linux is almost identical to the canonical Unix/i386
-   code, except that the error number in %eax is negated.  */
-
-#undef CALL_MCOUNT
-#define CALL_MCOUNT /* Don't insert the profiling call, it clobbers %eax.  */
-
-	.text
-ENTRY (__syscall_error)
-	negl %eax
-
-#define __syscall_error __syscall_error_1
-#include <i386-sysdep.S>
-
-#endif	/* !PIC */
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.h
deleted file mode 100644
index 48aeab195..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/* Copyright (C) 1992, 93, 95, 96, 97, 98, 99, 00 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper, <drepper@gnu.org>, August 1995.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LINUX_I386_SYSDEP_H
-#define _LINUX_I386_SYSDEP_H 1
-
-#include "i386-sysdep.h"
-
-/* For Linux we can use the system call table in the header file
-	/usr/include/asm/unistd.h
-   of the kernel.  But these symbols do not follow the SYS_* syntax
-   so we have to redefine the `SYS_ify' macro here.  */
-#undef SYS_ify
-#define SYS_ify(syscall_name)	__NR_##syscall_name
-
-/* ELF-like local names start with `.L'.  */
-#undef L
-#define L(name)	.L##name
-
-#ifdef __ASSEMBLER__
-
-/* Linux uses a negative return value to indicate syscall errors,
-   unlike most Unices, which use the condition codes' carry flag.
-
-   Since version 2.1 the return value of a system call might be
-   negative even if the call succeeded.  E.g., the `lseek' system call
-   might return a large offset.  Therefore we must not anymore test
-   for < 0, but test for a real error by making sure the value in %eax
-   is a real error number.  Linus said he will make sure the no syscall
-   returns a value in -1 .. -4095 as a valid result so we can savely
-   test with -4095.  */
-
-/* We don't want the label for the error handle to be global when we define
-   it here.  */
-#ifdef PIC
-# define SYSCALL_ERROR_LABEL 0f
-#else
-# define SYSCALL_ERROR_LABEL syscall_error
-#endif
-
-#undef	PSEUDO
-#define	PSEUDO(name, syscall_name, args)				      \
-  .text;								      \
-  ENTRY (name)								      \
-    DO_CALL (args, syscall_name);					      \
-    cmpl $-4095, %eax;							      \
-    jae SYSCALL_ERROR_LABEL;						      \
-  L(pseudo_end):
-
-#undef	PSEUDO_END
-#define	PSEUDO_END(name)						      \
-  SYSCALL_ERROR_HANDLER							      \
-  END (name)
-
-#ifndef PIC
-#define SYSCALL_ERROR_HANDLER	/* Nothing here; code in sysdep.S is used.  */
-#else
-/* Store (- %eax) into errno through the GOT.  */
-#ifdef _LIBC_REENTRANT
-#define SYSCALL_ERROR_HANDLER						      \
-0:pushl %ebx;								      \
-  call 1f;								      \
-1:popl %ebx;								      \
-  xorl %edx, %edx;							      \
-  addl $_GLOBAL_OFFSET_TABLE_+[.-1b], %ebx;				      \
-  subl %eax, %edx;							      \
-  pushl %edx;								      \
-  PUSH_ERRNO_LOCATION_RETURN;						      \
-  call BP_SYM (__errno_location)@PLT;					      \
-  POP_ERRNO_LOCATION_RETURN;						      \
-  popl %ecx;								      \
-  popl %ebx;								      \
-  movl %ecx, (%eax);							      \
-  orl $-1, %eax;							      \
-  jmp L(pseudo_end);
-/* A quick note: it is assumed that the call to `__errno_location' does
-   not modify the stack!  */
-#else
-#define SYSCALL_ERROR_HANDLER						      \
-0:call 1f;								      \
-1:popl %ecx;								      \
-  xorl %edx, %edx;							      \
-  addl $_GLOBAL_OFFSET_TABLE_+[.-1b], %ecx;				      \
-  subl %eax, %edx;							      \
-  movl errno@GOT(%ecx), %ecx;						      \
-  movl %edx, (%ecx);							      \
-  orl $-1, %eax;							      \
-  jmp L(pseudo_end);
-#endif	/* _LIBC_REENTRANT */
-#endif	/* PIC */
-
-/* Linux takes system call arguments in registers:
-
-	syscall number	%eax	     call-clobbered
-	arg 1		%ebx	     call-saved
-	arg 2		%ecx	     call-clobbered
-	arg 3		%edx	     call-clobbered
-	arg 4		%esi	     call-saved
-	arg 5		%edi	     call-saved
-
-   The stack layout upon entering the function is:
-
-	20(%esp)	Arg# 5
-	16(%esp)	Arg# 4
-	12(%esp)	Arg# 3
-	 8(%esp)	Arg# 2
-	 4(%esp)	Arg# 1
-	  (%esp)	Return address
-
-   (Of course a function with say 3 arguments does not have entries for
-   arguments 4 and 5.)
-
-   The following code tries hard to be optimal.  A general assumption
-   (which is true according to the data books I have) is that
-
-	2 * xchg	is more expensive than	pushl + movl + popl
-
-   Beside this a neat trick is used.  The calling conventions for Linux
-   tell that among the registers used for parameters %ecx and %edx need
-   not be saved.  Beside this we may clobber this registers even when
-   they are not used for parameter passing.
-
-   As a result one can see below that we save the content of the %ebx
-   register in the %edx register when we have less than 3 arguments
-   (2 * movl is less expensive than pushl + popl).
-
-   Second unlike for the other registers we don't save the content of
-   %ecx and %edx when we have more than 1 and 2 registers resp.
-
-   The code below might look a bit long but we have to take care for
-   the pipelined processors (i586).  Here the `pushl' and `popl'
-   instructions are marked as NP (not pairable) but the exception is
-   two consecutive of these instruction.  This gives no penalty on
-   other processors though.  */
-
-#undef	DO_CALL
-#define DO_CALL(args, syscall_name)			      		      \
-    PUSHARGS_##args							      \
-    DOARGS_##args							      \
-    movl $SYS_ify (syscall_name), %eax;					      \
-    int $0x80								      \
-    POPARGS_##args
-
-#define PUSHARGS_0	/* No arguments to push.  */
-#define	DOARGS_0	/* No arguments to frob.  */
-#define	POPARGS_0	/* No arguments to pop.  */
-#define	_PUSHARGS_0	/* No arguments to push.  */
-#define _DOARGS_0(n)	/* No arguments to frob.  */
-#define	_POPARGS_0	/* No arguments to pop.  */
-
-#define PUSHARGS_1	movl %ebx, %edx; PUSHARGS_0
-#define	DOARGS_1	_DOARGS_1 (4)
-#define	POPARGS_1	POPARGS_0; movl %edx, %ebx
-#define	_PUSHARGS_1	pushl %ebx; _PUSHARGS_0
-#define _DOARGS_1(n)	movl n(%esp), %ebx; _DOARGS_0(n-4)
-#define	_POPARGS_1	_POPARGS_0; popl %ebx
-
-#define PUSHARGS_2	PUSHARGS_1
-#define	DOARGS_2	_DOARGS_2 (8)
-#define	POPARGS_2	POPARGS_1
-#define _PUSHARGS_2	_PUSHARGS_1
-#define	_DOARGS_2(n)	movl n(%esp), %ecx; _DOARGS_1 (n-4)
-#define	_POPARGS_2	_POPARGS_1
-
-#define PUSHARGS_3	_PUSHARGS_2
-#define DOARGS_3	_DOARGS_3 (16)
-#define POPARGS_3	_POPARGS_3
-#define _PUSHARGS_3	_PUSHARGS_2
-#define _DOARGS_3(n)	movl n(%esp), %edx; _DOARGS_2 (n-4)
-#define _POPARGS_3	_POPARGS_2
-
-#define PUSHARGS_4	_PUSHARGS_4
-#define DOARGS_4	_DOARGS_4 (24)
-#define POPARGS_4	_POPARGS_4
-#define _PUSHARGS_4	pushl %esi; _PUSHARGS_3
-#define _DOARGS_4(n)	movl n(%esp), %esi; _DOARGS_3 (n-4)
-#define _POPARGS_4	_POPARGS_3; popl %esi
-
-#define PUSHARGS_5	_PUSHARGS_5
-#define DOARGS_5	_DOARGS_5 (32)
-#define POPARGS_5	_POPARGS_5
-#define _PUSHARGS_5	pushl %edi; _PUSHARGS_4
-#define _DOARGS_5(n)	movl n(%esp), %edi; _DOARGS_4 (n-4)
-#define _POPARGS_5	_POPARGS_4; popl %edi
-
-#else	/* !__ASSEMBLER__ */
-
-/* We need some help from the assembler to generate optimal code.  We
-   define some macros here which later will be used.  */
-asm (".L__X'%ebx = 1\n\t"
-     ".L__X'%ecx = 2\n\t"
-     ".L__X'%edx = 2\n\t"
-     ".L__X'%eax = 3\n\t"
-     ".L__X'%esi = 3\n\t"
-     ".L__X'%edi = 3\n\t"
-     ".L__X'%ebp = 3\n\t"
-     ".L__X'%esp = 3\n\t"
-     ".macro bpushl name reg\n\t"
-     ".if 1 - \\name\n\t"
-     ".if 2 - \\name\n\t"
-     "pushl %ebx\n\t"
-     ".else\n\t"
-     "xchgl \\reg, %ebx\n\t"
-     ".endif\n\t"
-     ".endif\n\t"
-     ".endm\n\t"
-     ".macro bpopl name reg\n\t"
-     ".if 1 - \\name\n\t"
-     ".if 2 - \\name\n\t"
-     "popl %ebx\n\t"
-     ".else\n\t"
-     "xchgl \\reg, %ebx\n\t"
-     ".endif\n\t"
-     ".endif\n\t"
-     ".endm\n\t"
-     ".macro bmovl name reg\n\t"
-     ".if 1 - \\name\n\t"
-     ".if 2 - \\name\n\t"
-     "movl \\reg, %ebx\n\t"
-     ".endif\n\t"
-     ".endif\n\t"
-     ".endm\n\t");
-
-/* Define a macro which expands inline into the wrapper code for a system
-   call.  */
-#undef INLINE_SYSCALL
-#define INLINE_SYSCALL(name, nr, args...) \
-  ({									      \
-    unsigned int resultvar;						      \
-    asm volatile (							      \
-    LOADARGS_##nr							      \
-    "movl %1, %%eax\n\t"						      \
-    "int $0x80\n\t"							      \
-    RESTOREARGS_##nr							      \
-    : "=a" (resultvar)							      \
-    : "i" (__NR_##name) ASMFMT_##nr(args) : "memory", "cc");		      \
-    if (resultvar >= 0xfffff001)					      \
-      {									      \
-	__set_errno (-resultvar);					      \
-	resultvar = 0xffffffff;						      \
-      }									      \
-    (int) resultvar; })
-
-#define LOADARGS_0
-#define LOADARGS_1 \
-    "bpushl .L__X'%k2, %k2\n\t"						      \
-    "bmovl .L__X'%k2, %k2\n\t"
-#define LOADARGS_2	LOADARGS_1
-#define LOADARGS_3	LOADARGS_1
-#define LOADARGS_4	LOADARGS_1
-#define LOADARGS_5	LOADARGS_1
-
-#define RESTOREARGS_0
-#define RESTOREARGS_1 \
-    "bpopl .L__X'%k2, %k2\n\t"
-#define RESTOREARGS_2	RESTOREARGS_1
-#define RESTOREARGS_3	RESTOREARGS_1
-#define RESTOREARGS_4	RESTOREARGS_1
-#define RESTOREARGS_5	RESTOREARGS_1
-
-#define ASMFMT_0()
-#define ASMFMT_1(arg1) \
-	, "acdSD" (arg1)
-#define ASMFMT_2(arg1, arg2) \
-	, "adCD" (arg1), "c" (arg2)
-#define ASMFMT_3(arg1, arg2, arg3) \
-	, "aCD" (arg1), "c" (arg2), "d" (arg3)
-#define ASMFMT_4(arg1, arg2, arg3, arg4) \
-	, "aD" (arg1), "c" (arg2), "d" (arg3), "S" (arg4)
-#define ASMFMT_5(arg1, arg2, arg3, arg4, arg5) \
-	, "a" (arg1), "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)
-
-#endif	/* __ASSEMBLER__ */
-
-#endif /* linux/i386/sysdep.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/useldt.h b/newlib/libc/sys/linux/linuxthreads/machine/i386/useldt.h
deleted file mode 100644
index 02d079c9e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/useldt.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/* Special definitions for ix86 machine using segment register based
-   thread descriptor.
-   Copyright (C) 1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>	/* For offsetof.  */
-#include <stdlib.h>	/* For abort().  */
-
-
-/* We don't want to include the kernel header.  So duplicate the
-   information.  */
-
-/* Structure passed on `modify_ldt' call.  */
-struct modify_ldt_ldt_s
-{
-  unsigned int entry_number;
-  unsigned long int base_addr;
-  unsigned int limit;
-  unsigned int seg_32bit:1;
-  unsigned int contents:2;
-  unsigned int read_exec_only:1;
-  unsigned int limit_in_pages:1;
-  unsigned int seg_not_present:1;
-  unsigned int useable:1;
-  unsigned int empty:25;
-};
-
-/* System call to set LDT entry.  */
-extern int __modify_ldt (int, struct modify_ldt_ldt_s *, size_t);
-
-
-/* Return the thread descriptor for the current thread.
-
-   The contained asm must *not* be marked volatile since otherwise
-   assignments like
-	pthread_descr self = thread_self();
-   do not get optimized away.  */
-#define THREAD_SELF \
-({									      \
-  register pthread_descr __self;					      \
-  __asm__ ("movl %%gs:%c1,%0" : "=r" (__self)				      \
-	   : "i" (offsetof (struct _pthread_descr_struct,		      \
-			    p_header.data.self)));			      \
-  __self;								      \
-})
-
-/* Initialize the thread-unique value.  */
-#define INIT_THREAD_SELF(descr, nr) \
-{									      \
-  struct modify_ldt_ldt_s ldt_entry =					      \
-    { nr, (unsigned long int) descr, sizeof (*descr), 1, 0, 0, 0, 0, 1, 0 };  \
-  if (__modify_ldt (1, &ldt_entry, sizeof (ldt_entry)) != 0)		      \
-    abort ();								      \
-  __asm__ __volatile__ ("movw %w0, %%gs" : : "q" (nr * 8 + 7));		      \
-}
-
-/* Free resources associated with thread descriptor.  */
-#define FREE_THREAD(descr, nr) \
-{									      \
-  struct modify_ldt_ldt_s ldt_entry =					      \
-    { nr, 0, 0, 0, 0, 1, 0, 1, 0, 0 };					      \
-  __modify_ldt (1, &ldt_entry, sizeof (ldt_entry));			      \
-}
-
-/* Read member of the thread descriptor directly.  */
-#define THREAD_GETMEM(descr, member) \
-({									      \
-  __typeof__ (descr->member) __value;					      \
-  if (sizeof (__value) == 1)						      \
-    __asm__ __volatile__ ("movb %%gs:%P2,%b0"				      \
-			  : "=q" (__value)				      \
-			  : "0" (0),					      \
-			    "i" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else if (sizeof (__value) == 4)					      \
-    __asm__ __volatile__ ("movl %%gs:%P1,%0"				      \
-			  : "=r" (__value)				      \
-			  : "i" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else									      \
-    {									      \
-      if (sizeof (__value) != 8)					      \
-	/* There should not be any value with a size other than 1, 4 or 8.  */\
-	abort ();							      \
-									      \
-      __asm__ __volatile__ ("movl %%gs:%P1,%%eax\n\t"			      \
-			    "movl %%gs:%P2,%%edx"			      \
-			    : "=A" (__value)				      \
-			    : "i" (offsetof (struct _pthread_descr_struct,    \
-					     member)),			      \
-			      "i" (offsetof (struct _pthread_descr_struct,    \
-					     member) + 4));		      \
-    }									      \
-  __value;								      \
-})
-
-/* Same as THREAD_GETMEM, but the member offset can be non-constant.  */
-#define THREAD_GETMEM_NC(descr, member) \
-({									      \
-  __typeof__ (descr->member) __value;					      \
-  if (sizeof (__value) == 1)						      \
-    __asm__ __volatile__ ("movb %%gs:(%2),%b0"				      \
-			  : "=q" (__value)				      \
-			  : "0" (0),					      \
-			    "r" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else if (sizeof (__value) == 4)					      \
-    __asm__ __volatile__ ("movl %%gs:(%1),%0"				      \
-			  : "=r" (__value)				      \
-			  : "r" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else									      \
-    {									      \
-      if (sizeof (__value) != 8)					      \
-	/* There should not be any value with a size other than 1, 4 or 8.  */\
-	abort ();							      \
-									      \
-      __asm__ __volatile__ ("movl %%gs:(%1),%%eax\n\t"			      \
-			    "movl %%gs:4(%1),%%edx"			      \
-			    : "=&A" (__value)				      \
-			    : "r" (offsetof (struct _pthread_descr_struct,    \
-					     member)));			      \
-    }									      \
-  __value;								      \
-})
-
-/* Same as THREAD_SETMEM, but the member offset can be non-constant.  */
-#define THREAD_SETMEM(descr, member, value) \
-({									      \
-  __typeof__ (descr->member) __value = (value);				      \
-  if (sizeof (__value) == 1)						      \
-    __asm__ __volatile__ ("movb %0,%%gs:%P1" :				      \
-			  : "q" (__value),				      \
-			    "i" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else if (sizeof (__value) == 4)					      \
-    __asm__ __volatile__ ("movl %0,%%gs:%P1" :				      \
-			  : "r" (__value),				      \
-			    "i" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else									      \
-    {									      \
-      if (sizeof (__value) != 8)					      \
-	/* There should not be any value with a size other than 1, 4 or 8.  */\
-	abort ();							      \
-									      \
-      __asm__ __volatile__ ("movl %%eax,%%gs:%P1\n\n"			      \
-			    "movl %%edx,%%gs:%P2" :			      \
-			    : "A" (__value),				      \
-			      "i" (offsetof (struct _pthread_descr_struct,    \
-					     member)),			      \
-			      "i" (offsetof (struct _pthread_descr_struct,    \
-					     member) + 4));		      \
-    }									      \
-})
-
-/* Set member of the thread descriptor directly.  */
-#define THREAD_SETMEM_NC(descr, member, value) \
-({									      \
-  __typeof__ (descr->member) __value = (value);				      \
-  if (sizeof (__value) == 1)						      \
-    __asm__ __volatile__ ("movb %0,%%gs:(%1)" :				      \
-			  : "q" (__value),				      \
-			    "r" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else if (sizeof (__value) == 4)					      \
-    __asm__ __volatile__ ("movl %0,%%gs:(%1)" :				      \
-			  : "r" (__value),				      \
-			    "r" (offsetof (struct _pthread_descr_struct,      \
-					   member)));			      \
-  else									      \
-    {									      \
-      if (sizeof (__value) != 8)					      \
-	/* There should not be any value with a size other than 1, 4 or 8.  */\
-	abort ();							      \
-									      \
-      __asm__ __volatile__ ("movl %%eax,%%gs:(%1)\n\t"			      \
-			    "movl %%edx,%%gs:4(%1)" :			      \
-			    : "A" (__value),				      \
-			      "r" (offsetof (struct _pthread_descr_struct,    \
-					     member)));			      \
-    }									      \
-})
-
-/* We want the OS to assign stack addresses.  */
-#define FLOATING_STACKS	1
-
-/* Maximum size of the stack if the rlimit is unlimited.  */
-#define ARCH_STACK_MAX_SIZE	8*1024*1024
diff --git a/newlib/libc/sys/linux/linuxthreads/manager.c b/newlib/libc/sys/linux/linuxthreads/manager.c
deleted file mode 100644
index 7729903cf..000000000
--- a/newlib/libc/sys/linux/linuxthreads/manager.c
+++ /dev/null
@@ -1,981 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* The "thread manager" thread: manages creation and termination of threads */
-
-#include <errno.h>
-#include <sched.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/poll.h>		/* for poll */
-#include <sys/mman.h>           /* for mmap */
-#include <sys/param.h>
-#include <sys/time.h>
-#include <sys/wait.h>           /* for waitpid macros */
-
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-#include "semaphore.h"
-
-/* Array of active threads. Entry 0 is reserved for the initial thread. */
-struct pthread_handle_struct __pthread_handles[PTHREAD_THREADS_MAX] =
-{ { __LOCK_INITIALIZER, &__pthread_initial_thread, 0},
-  { __LOCK_INITIALIZER, &__pthread_manager_thread, 0}, /* All NULLs */ };
-
-/* For debugging purposes put the maximum number of threads in a variable.  */
-const int __linuxthreads_pthread_threads_max = PTHREAD_THREADS_MAX;
-
-#ifndef THREAD_SELF
-/* Indicate whether at least one thread has a user-defined stack (if 1),
-   or if all threads have stacks supplied by LinuxThreads (if 0). */
-int __pthread_nonstandard_stacks;
-#endif
-
-/* Number of active entries in __pthread_handles (used by gdb) */
-volatile int __pthread_handles_num = 2;
-
-/* Whether to use debugger additional actions for thread creation
-   (set to 1 by gdb) */
-volatile int __pthread_threads_debug;
-
-/* Globally enabled events.  */
-volatile td_thr_events_t __pthread_threads_events;
-
-/* Pointer to thread descriptor with last event.  */
-volatile pthread_descr __pthread_last_event;
-
-/* Mapping from stack segment to thread descriptor. */
-/* Stack segment numbers are also indices into the __pthread_handles array. */
-/* Stack segment number 0 is reserved for the initial thread. */
-
-#if FLOATING_STACKS
-# define thread_segment(seq) NULL
-#else
-static inline pthread_descr thread_segment(int seg)
-{
-  return (pthread_descr)(THREAD_STACK_START_ADDRESS - (seg - 1) * STACK_SIZE)
-         - 1;
-}
-#endif
-
-/* Flag set in signal handler to record child termination */
-
-static volatile int terminated_children;
-
-/* Flag set when the initial thread is blocked on pthread_exit waiting
-   for all other threads to terminate */
-
-static int main_thread_exiting;
-
-/* Counter used to generate unique thread identifier.
-   Thread identifier is pthread_threads_counter + segment. */
-
-static pthread_t pthread_threads_counter;
-
-/* Forward declarations */
-
-static int pthread_handle_create(pthread_t *thread, const pthread_attr_t *attr,
-                                 void * (*start_routine)(void *), void *arg,
-                                 sigset_t *mask, int father_pid,
-				 int report_events,
-				 td_thr_events_t *event_maskp);
-static void pthread_handle_free(pthread_t th_id);
-static void pthread_handle_exit(pthread_descr issuing_thread, int exitcode)
-     __attribute__ ((noreturn));
-static void pthread_reap_children(void);
-static void pthread_kill_all_threads(int sig, int main_thread_also);
-static void pthread_for_each_thread(void *arg, 
-    void (*fn)(void *, pthread_descr));
-
-/* The server thread managing requests for thread creation and termination */
-
-int
-__attribute__ ((noreturn))
-__pthread_manager(void *arg)
-{
-  int reqfd = (int) (long int) arg;
-  struct pollfd ufd;
-  sigset_t manager_mask;
-  int n;
-  struct pthread_request request;
-
-  /* If we have special thread_self processing, initialize it.  */
-#ifdef INIT_THREAD_SELF
-  INIT_THREAD_SELF(&__pthread_manager_thread, 1);
-#endif
-  /* Set the error variable.  */
-  __pthread_manager_thread.p_reentp = &__pthread_manager_thread.p_reent;
-  __pthread_manager_thread.p_h_errnop = &__pthread_manager_thread.p_h_errno;
-  /* Block all signals except __pthread_sig_cancel and SIGTRAP */
-  sigfillset(&manager_mask);
-  sigdelset(&manager_mask, __pthread_sig_cancel); /* for thread termination */
-  sigdelset(&manager_mask, SIGTRAP);            /* for debugging purposes */
-  if (__pthread_threads_debug && __pthread_sig_debug > 0)
-    sigdelset(&manager_mask, __pthread_sig_debug);
-  sigprocmask(SIG_SETMASK, &manager_mask, NULL);
-  /* Raise our priority to match that of main thread */
-  __pthread_manager_adjust_prio(__pthread_main_thread->p_priority);
-  /* Synchronize debugging of the thread manager */
-  n = TEMP_FAILURE_RETRY(__libc_read(reqfd, (char *)&request,
-				     sizeof(request)));
-  ASSERT(n == sizeof(request) && request.req_kind == REQ_DEBUG);
-  ufd.fd = reqfd;
-  ufd.events = POLLIN;
-  /* Enter server loop */
-  while(1) {
-    n = __poll(&ufd, 1, 2000);
-
-    /* Check for termination of the main thread */
-    if (getppid() == 1) {
-      pthread_kill_all_threads(SIGKILL, 0);
-      _exit(0);
-    }
-    /* Check for dead children */
-    if (terminated_children) {
-      terminated_children = 0;
-      pthread_reap_children();
-    }
-    /* Read and execute request */
-    if (n == 1 && (ufd.revents & POLLIN)) {
-      n = TEMP_FAILURE_RETRY(__libc_read(reqfd, (char *)&request,
-					 sizeof(request)));
-#ifdef DEBUG
-      if (n < 0) {
-	char d[64];
-	write(STDERR_FILENO, d, snprintf(d, sizeof(d), "*** read err %m\n"));
-      } else if (n != sizeof(request)) {
-	write(STDERR_FILENO, "*** short read in manager\n", 26);
-      }
-#endif
-
-      switch(request.req_kind) {
-      case REQ_CREATE:
-        request.req_thread->p_retcode =
-          pthread_handle_create((pthread_t *) &request.req_thread->p_retval,
-                                request.req_args.create.attr,
-                                request.req_args.create.fn,
-                                request.req_args.create.arg,
-                                &request.req_args.create.mask,
-                                request.req_thread->p_pid,
-				request.req_thread->p_report_events,
-				&request.req_thread->p_eventbuf.eventmask);
-        restart(request.req_thread);
-        break;
-      case REQ_FREE:
-	pthread_handle_free(request.req_args.free.thread_id);
-        break;
-      case REQ_PROCESS_EXIT:
-        pthread_handle_exit(request.req_thread,
-                            request.req_args.exit.code);
-	/* NOTREACHED */
-        break;
-      case REQ_MAIN_THREAD_EXIT:
-        main_thread_exiting = 1;
-	/* Reap children in case all other threads died and the signal handler
-	   went off before we set main_thread_exiting to 1, and therefore did
-	   not do REQ_KICK. */
-	pthread_reap_children();
-
-        if (__pthread_main_thread->p_nextlive == __pthread_main_thread) {
-          restart(__pthread_main_thread);
-	  /* The main thread will now call exit() which will trigger an
-	     __on_exit handler, which in turn will send REQ_PROCESS_EXIT
-	     to the thread manager. In case you are wondering how the
-	     manager terminates from its loop here. */
-	}
-        break;
-      case REQ_POST:
-        __new_sem_post(request.req_args.post);
-        break;
-      case REQ_DEBUG:
-	/* Make gdb aware of new thread and gdb will restart the
-	   new thread when it is ready to handle the new thread. */
-	if (__pthread_threads_debug && __pthread_sig_debug > 0)
-	  raise(__pthread_sig_debug);
-        break;
-      case REQ_KICK:
-	/* This is just a prod to get the manager to reap some
-	   threads right away, avoiding a potential delay at shutdown. */
-	break;
-      case REQ_FOR_EACH_THREAD:
-	pthread_for_each_thread(request.req_args.for_each.arg,
-	                        request.req_args.for_each.fn);
-	restart(request.req_thread);
-	break;
-      }
-    }
-  }
-}
-
-int __pthread_manager_event(void *arg)
-{
-  /* If we have special thread_self processing, initialize it.  */
-#ifdef INIT_THREAD_SELF
-  INIT_THREAD_SELF(&__pthread_manager_thread, 1);
-#endif
-
-  /* Get the lock the manager will free once all is correctly set up.  */
-  __pthread_lock (THREAD_GETMEM((&__pthread_manager_thread), p_lock), NULL);
-  /* Free it immediately.  */
-  __pthread_unlock (THREAD_GETMEM((&__pthread_manager_thread), p_lock));
-
-  return __pthread_manager(arg);
-}
-
-/* Process creation */
-
-static int
-__attribute__ ((noreturn))
-pthread_start_thread(void *arg)
-{
-  pthread_descr self = (pthread_descr) arg;
-  struct pthread_request request;
-  void * outcome;
-#if HP_TIMING_AVAIL
-  hp_timing_t tmpclock;
-#endif
-  /* Initialize special thread_self processing, if any.  */
-#ifdef INIT_THREAD_SELF
-  INIT_THREAD_SELF(self, self->p_nr);
-#endif
-#if HP_TIMING_AVAIL
-  HP_TIMING_NOW (tmpclock);
-  THREAD_SETMEM (self, p_cpuclock_offset, tmpclock);
-#endif
-  /* Make sure our pid field is initialized, just in case we get there
-     before our father has initialized it. */
-  THREAD_SETMEM(self, p_pid, __getpid());
-  /* Initial signal mask is that of the creating thread. (Otherwise,
-     we'd just inherit the mask of the thread manager.) */
-  sigprocmask(SIG_SETMASK, &self->p_start_args.mask, NULL);
-  /* Set the scheduling policy and priority for the new thread, if needed */
-  if (THREAD_GETMEM(self, p_start_args.schedpolicy) >= 0)
-    /* Explicit scheduling attributes were provided: apply them */
-    __sched_setscheduler(THREAD_GETMEM(self, p_pid),
-			 THREAD_GETMEM(self, p_start_args.schedpolicy),
-                         &self->p_start_args.schedparam);
-  else if (__pthread_manager_thread.p_priority > 0)
-    /* Default scheduling required, but thread manager runs in realtime
-       scheduling: switch new thread to SCHED_OTHER policy */
-    {
-      struct sched_param default_params;
-      default_params.sched_priority = 0;
-      __sched_setscheduler(THREAD_GETMEM(self, p_pid),
-                           SCHED_OTHER, &default_params);
-    }
-  /* Make gdb aware of new thread */
-  if (__pthread_threads_debug && __pthread_sig_debug > 0) {
-    request.req_thread = self;
-    request.req_kind = REQ_DEBUG;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-    suspend(self);
-  }
-  /* Run the thread code */
-  outcome = self->p_start_args.start_routine(THREAD_GETMEM(self,
-							   p_start_args.arg));
-  /* Exit with the given return value */
-  __pthread_do_exit(outcome, CURRENT_STACK_FRAME);
-}
-
-static int
-__attribute__ ((noreturn))
-pthread_start_thread_event(void *arg)
-{
-  pthread_descr self = (pthread_descr) arg;
-
-#ifdef INIT_THREAD_SELF
-  INIT_THREAD_SELF(self, self->p_nr);
-#endif
-  /* Make sure our pid field is initialized, just in case we get there
-     before our father has initialized it. */
-  THREAD_SETMEM(self, p_pid, __getpid());
-  /* Get the lock the manager will free once all is correctly set up.  */
-  __pthread_lock (THREAD_GETMEM(self, p_lock), NULL);
-  /* Free it immediately.  */
-  __pthread_unlock (THREAD_GETMEM(self, p_lock));
-
-  /* Continue with the real function.  */
-  pthread_start_thread (arg);
-}
-
-static int pthread_allocate_stack(const pthread_attr_t *attr,
-                                  pthread_descr default_new_thread,
-                                  int pagesize,
-                                  pthread_descr * out_new_thread,
-                                  char ** out_new_thread_bottom,
-                                  char ** out_guardaddr,
-                                  size_t * out_guardsize)
-{
-  pthread_descr new_thread;
-  char * new_thread_bottom;
-  char * guardaddr;
-  size_t stacksize, guardsize;
-
-  if (attr != NULL && attr->__stackaddr_set)
-    {
-#ifdef _STACK_GROWS_UP
-      /* The user provided a stack. */
-      new_thread = (pthread_descr) attr->__stackaddr;
-      new_thread_bottom = (char *) (new_thread + 1);
-      guardaddr = attr->__stackaddr + attr->__stacksize;
-      guardsize = 0;
-#else
-      /* The user provided a stack.  For now we interpret the supplied
-	 address as 1 + the highest addr. in the stack segment.  If a
-	 separate register stack is needed, we place it at the low end
-	 of the segment, relying on the associated stacksize to
-	 determine the low end of the segment.  This differs from many
-	 (but not all) other pthreads implementations.  The intent is
-	 that on machines with a single stack growing toward higher
-	 addresses, stackaddr would be the lowest address in the stack
-	 segment, so that it is consistently close to the initial sp
-	 value. */
-      new_thread =
-        (pthread_descr) ((long)(attr->__stackaddr) & -sizeof(void *)) - 1;
-      new_thread_bottom = (char *) attr->__stackaddr - attr->__stacksize;
-      guardaddr = new_thread_bottom;
-      guardsize = 0;
-#endif
-#ifndef THREAD_SELF
-      __pthread_nonstandard_stacks = 1;
-#endif
-      /* Clear the thread data structure.  */
-      memset (new_thread, '\0', sizeof (*new_thread));
-    }
-  else
-    {
-#ifdef NEED_SEPARATE_REGISTER_STACK
-      size_t granularity = 2 * pagesize;
-      /* Try to make stacksize/2 a multiple of pagesize */
-#else
-      size_t granularity = pagesize;
-#endif
-      void *map_addr;
-
-      /* Allocate space for stack and thread descriptor at default address */
-#if FLOATING_STACKS
-      if (attr != NULL)
-	{
-	  guardsize = page_roundup (attr->__guardsize, granularity);
-	  stacksize = __pthread_max_stacksize - guardsize;
-	  stacksize = MIN (stacksize,
-			   page_roundup (attr->__stacksize, granularity));
-	}
-      else
-	{
-	  guardsize = granularity;
-	  stacksize = __pthread_max_stacksize - guardsize;
-	}
-
-      map_addr = mmap(NULL, stacksize + guardsize,
-		      PROT_READ | PROT_WRITE | PROT_EXEC,
-		      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-      if (map_addr == MAP_FAILED)
-        /* No more memory available.  */
-        return -1;
-
-# ifdef NEED_SEPARATE_REGISTER_STACK
-      guardaddr = map_addr + stacksize / 2;
-      if (guardsize > 0)
-	mprotect (guardaddr, guardsize, PROT_NONE);
-
-      new_thread_bottom = (char *) map_addr;
-      new_thread = ((pthread_descr) (new_thread_bottom + stacksize
-				     + guardsize)) - 1;
-# elif _STACK_GROWS_DOWN
-      guardaddr = map_addr;
-      if (guardsize > 0)
-	mprotect (guardaddr, guardsize, PROT_NONE);
-
-      new_thread_bottom = (char *) map_addr + guardsize;
-      new_thread = ((pthread_descr) (new_thread_bottom + stacksize)) - 1;
-# elif _STACK_GROWS_UP
-      guardaddr = map_addr + stacksize;
-      if (guardsize > 0)
-	mprotect (guardaddr, guardsize, PROT_NONE);
-
-      new_thread = (pthread_descr) map_addr;
-      new_thread_bottom = (char *) (new_thread + 1);
-# else
-#  error You must define a stack direction
-# endif /* Stack direction */
-#else /* !FLOATING_STACKS */
-      void *res_addr;
-
-      if (attr != NULL)
-	{
-	  guardsize = page_roundup (attr->__guardsize, granularity);
-	  stacksize = STACK_SIZE - guardsize;
-	  stacksize = MIN (stacksize,
-			   page_roundup (attr->__stacksize, granularity));
-	}
-      else
-	{
-	  guardsize = granularity;
-	  stacksize = STACK_SIZE - granularity;
-	}
-
-# ifdef NEED_SEPARATE_REGISTER_STACK
-      new_thread = default_new_thread;
-      new_thread_bottom = (char *) (new_thread + 1) - stacksize - guardsize;
-      /* Includes guard area, unlike the normal case.  Use the bottom
-       end of the segment as backing store for the register stack.
-       Needed on IA64.  In this case, we also map the entire stack at
-       once.  According to David Mosberger, that's cheaper.  It also
-       avoids the risk of intermittent failures due to other mappings
-       in the same region.  The cost is that we might be able to map
-       slightly fewer stacks.  */
-
-      /* First the main stack: */
-      map_addr = (caddr_t)((char *)(new_thread + 1) - stacksize / 2);
-      res_addr = mmap(map_addr, stacksize / 2,
-		      PROT_READ | PROT_WRITE | PROT_EXEC,
-		      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-      if (res_addr != map_addr)
-	{
-	  /* Bad luck, this segment is already mapped. */
-	  if (res_addr != MAP_FAILED)
-	    munmap(res_addr, stacksize / 2);
-	  return -1;
-	}
-      /* Then the register stack:	*/
-      map_addr = (caddr_t)new_thread_bottom;
-      res_addr = mmap(map_addr, stacksize/2,
-		      PROT_READ | PROT_WRITE | PROT_EXEC,
-		      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-      if (res_addr != map_addr)
-	{
-	  if (res_addr != MAP_FAILED)
-	    munmap(res_addr, stacksize / 2);
-	  munmap((caddr_t)((char *)(new_thread + 1) - stacksize/2),
-		 stacksize/2);
-	  return -1;
-	}
-
-      guardaddr = new_thread_bottom + stacksize/2;
-      /* We leave the guard area in the middle unmapped.	*/
-# else  /* !NEED_SEPARATE_REGISTER_STACK */
-#  ifdef _STACK_GROWS_DOWN
-      new_thread = default_new_thread;
-      new_thread_bottom = (char *) (new_thread + 1) - stacksize;
-      map_addr = new_thread_bottom - guardsize;
-      res_addr = mmap(map_addr, stacksize + guardsize,
-		      PROT_READ | PROT_WRITE | PROT_EXEC,
-		      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-      if (res_addr != map_addr)
-	{
-	  /* Bad luck, this segment is already mapped. */
-	  if (res_addr != MAP_FAILED)
-	    munmap (res_addr, stacksize + guardsize);
-	  return -1;
-	}
-
-      /* We manage to get a stack.  Protect the guard area pages if
-	 necessary.  */
-      guardaddr = map_addr;
-      if (guardsize > 0)
-	mprotect (guardaddr, guardsize, PROT_NONE);
-#  else
-      /* The thread description goes at the bottom of this area, and
-       * the stack starts directly above it.
-       */
-      new_thread = (pthread_descr)((unsigned long)default_new_thread &~ (STACK_SIZE - 1));
-      map_addr = mmap(new_thread, stacksize + guardsize,
-		      PROT_READ | PROT_WRITE | PROT_EXEC,
-		      MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-      if (map_addr == MAP_FAILED)
-	  return -1;
-
-      new_thread_bottom = map_addr + sizeof(*new_thread);
-      guardaddr = map_addr + stacksize;
-      if (guardsize > 0)
-	  mprotect (guardaddr, guardsize, PROT_NONE);
-
-#  endif /* stack direction */
-# endif  /* !NEED_SEPARATE_REGISTER_STACK */
-#endif   /* !FLOATING_STACKS */
-    }
-  *out_new_thread = new_thread;
-  *out_new_thread_bottom = new_thread_bottom;
-  *out_guardaddr = guardaddr;
-  *out_guardsize = guardsize;
-  return 0;
-}
-
-static int pthread_handle_create(pthread_t *thread, const pthread_attr_t *attr,
-				 void * (*start_routine)(void *), void *arg,
-				 sigset_t * mask, int father_pid,
-				 int report_events,
-				 td_thr_events_t *event_maskp)
-{
-  size_t sseg;
-  int pid;
-  pthread_descr new_thread;
-  char * new_thread_bottom;
-  pthread_t new_thread_id;
-  char *guardaddr = NULL;
-  size_t guardsize = 0;
-  int pagesize = __getpagesize();
-
-  /* First check whether we have to change the policy and if yes, whether
-     we can  do this.  Normally this should be done by examining the
-     return value of the __sched_setscheduler call in pthread_start_thread
-     but this is hard to implement.  FIXME  */
-  if (attr != NULL && attr->__schedpolicy != SCHED_OTHER && geteuid () != 0)
-    return EPERM;
-  /* Find a free segment for the thread, and allocate a stack if needed */
-  for (sseg = 2; ; sseg++)
-    {
-      if (sseg >= PTHREAD_THREADS_MAX)
-	return EAGAIN;
-      if (__pthread_handles[sseg].h_descr != NULL)
-	continue;
-      if (pthread_allocate_stack(attr, thread_segment(sseg),
-				 pagesize,
-                                 &new_thread, &new_thread_bottom,
-                                 &guardaddr, &guardsize) == 0)
-        break;
-    }
-  __pthread_handles_num++;
-  /* Allocate new thread identifier */
-  pthread_threads_counter += PTHREAD_THREADS_MAX;
-  new_thread_id = sseg + pthread_threads_counter;
-  /* Initialize the thread descriptor.  Elements which have to be
-     initialized to zero already have this value.  */
-  new_thread->p_tid = new_thread_id;
-  new_thread->p_lock = &(__pthread_handles[sseg].h_lock);
-  new_thread->p_cancelstate = PTHREAD_CANCEL_ENABLE;
-  new_thread->p_canceltype = PTHREAD_CANCEL_DEFERRED;
-  new_thread->p_reentp = &new_thread->p_reent;
-  _REENT_INIT_PTR(new_thread->p_reentp);
-  new_thread->p_h_errnop = &new_thread->p_h_errno;
-  new_thread->p_resp = &new_thread->p_res;
-  new_thread->p_guardaddr = guardaddr;
-  new_thread->p_guardsize = guardsize;
-  new_thread->p_header.data.self = new_thread;
-  new_thread->p_nr = sseg;
-  new_thread->p_inheritsched = attr ? attr->__inheritsched : 0;
-  /* Initialize the thread handle */
-  __pthread_init_lock(&__pthread_handles[sseg].h_lock);
-  __pthread_handles[sseg].h_descr = new_thread;
-  __pthread_handles[sseg].h_bottom = new_thread_bottom;
-  /* Determine scheduling parameters for the thread */
-  new_thread->p_start_args.schedpolicy = -1;
-  if (attr != NULL) {
-    new_thread->p_detached = attr->__detachstate;
-    new_thread->p_userstack = attr->__stackaddr_set;
-
-    switch(attr->__inheritsched) {
-    case PTHREAD_EXPLICIT_SCHED:
-      new_thread->p_start_args.schedpolicy = attr->__schedpolicy;
-      memcpy (&new_thread->p_start_args.schedparam, &attr->__schedparam,
-	      sizeof (struct sched_param));
-      break;
-    case PTHREAD_INHERIT_SCHED:
-      new_thread->p_start_args.schedpolicy = __sched_getscheduler(father_pid);
-      __sched_getparam(father_pid, &new_thread->p_start_args.schedparam);
-      break;
-    }
-    new_thread->p_priority =
-      new_thread->p_start_args.schedparam.sched_priority;
-  }
-  /* Finish setting up arguments to pthread_start_thread */
-  new_thread->p_start_args.start_routine = start_routine;
-  new_thread->p_start_args.arg = arg;
-  new_thread->p_start_args.mask = *mask;
-  /* Make the new thread ID available already now.  If any of the later
-     functions fail we return an error value and the caller must not use
-     the stored thread ID.  */
-  *thread = new_thread_id;
-  /* Raise priority of thread manager if needed */
-  __pthread_manager_adjust_prio(new_thread->p_priority);
-  /* Do the cloning.  We have to use two different functions depending
-     on whether we are debugging or not.  */
-  pid = 0;	/* Note that the thread never can have PID zero.  */
-  if (report_events)
-    {
-      /* See whether the TD_CREATE event bit is set in any of the
-         masks.  */
-      int idx = __td_eventword (TD_CREATE);
-      uint32_t mask = __td_eventmask (TD_CREATE);
-
-      if ((mask & (__pthread_threads_events.event_bits[idx]
-		   | event_maskp->event_bits[idx])) != 0)
-	{
-	  /* Lock the mutex the child will use now so that it will stop.  */
-	  __pthread_lock(new_thread->p_lock, NULL);
-
-	  /* We have to report this event.  */
-#ifdef NEED_SEPARATE_REGISTER_STACK
-	  /* Perhaps this version should be used on all platforms. But
-	   this requires that __clone2 be uniformly supported
-	   everywhere.
-
-	   And there is some argument for changing the __clone2
-	   interface to pass sp and bsp instead, making it more IA64
-	   specific, but allowing stacks to grow outward from each
-	   other, to get less paging and fewer mmaps.  */
-	  pid = __clone2(pthread_start_thread_event,
-  		 (void **)new_thread_bottom,
-			 (char *)new_thread - new_thread_bottom,
-			 CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-			 __pthread_sig_cancel, new_thread);
-#elif _STACK_GROWS_UP
-	  pid = __clone(pthread_start_thread_event, (void **) new_thread_bottom,
-			CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-			__pthread_sig_cancel, new_thread);
-#else
-	  pid = __clone(pthread_start_thread_event, (void **) new_thread,
-			CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-			__pthread_sig_cancel, new_thread);
-#endif
-	  if (pid != -1)
-	    {
-	      /* Now fill in the information about the new thread in
-		 the newly created thread's data structure.  We cannot let
-		 the new thread do this since we don't know whether it was
-		 already scheduled when we send the event.  */
-	      new_thread->p_eventbuf.eventdata = new_thread;
-	      new_thread->p_eventbuf.eventnum = TD_CREATE;
-	      __pthread_last_event = new_thread;
-
-	      /* We have to set the PID here since the callback function
-		 in the debug library will need it and we cannot guarantee
-		 the child got scheduled before the debugger.  */
-	      new_thread->p_pid = pid;
-
-	      /* Now call the function which signals the event.  */
-	      __linuxthreads_create_event ();
-
-	      /* Now restart the thread.  */
-	      __pthread_unlock(new_thread->p_lock);
-	    }
-	}
-    }
-  if (pid == 0)
-    {
-#ifdef NEED_SEPARATE_REGISTER_STACK
-      pid = __clone2(pthread_start_thread,
-		     (void **)new_thread_bottom,
-                     (char *)new_thread - new_thread_bottom,
-		     CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-		     __pthread_sig_cancel, new_thread);
-#elif _STACK_GROWS_UP
-      pid = __clone(pthread_start_thread, (void **) new_thread_bottom,
-		    CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-		    __pthread_sig_cancel, new_thread);
-#else
-      pid = __clone(pthread_start_thread, (void **) new_thread,
-		    CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND |
-		    __pthread_sig_cancel, new_thread);
-#endif /* !NEED_SEPARATE_REGISTER_STACK */
-    }
-  /* Check if cloning succeeded */
-  if (pid == -1) {
-    /* Free the stack if we allocated it */
-    if (attr == NULL || !attr->__stackaddr_set)
-      {
-#ifdef NEED_SEPARATE_REGISTER_STACK
-	size_t stacksize = ((char *)(new_thread->p_guardaddr)
-			    - new_thread_bottom);
-	munmap((caddr_t)new_thread_bottom,
-	       2 * stacksize + new_thread->p_guardsize);
-#elif _STACK_GROWS_UP
-	size_t stacksize = guardaddr - (char *)new_thread;
-	munmap(new_thread, stacksize + guardsize);
-#else
-	size_t stacksize = (char *)(new_thread+1) - new_thread_bottom;
-	munmap(new_thread_bottom - guardsize, guardsize + stacksize);
-#endif
-      }
-    __pthread_handles[sseg].h_descr = NULL;
-    __pthread_handles[sseg].h_bottom = NULL;
-    __pthread_handles_num--;
-    return errno;
-  }
-  /* Insert new thread in doubly linked list of active threads */
-  new_thread->p_prevlive = __pthread_main_thread;
-  new_thread->p_nextlive = __pthread_main_thread->p_nextlive;
-  __pthread_main_thread->p_nextlive->p_prevlive = new_thread;
-  __pthread_main_thread->p_nextlive = new_thread;
-  /* Set pid field of the new thread, in case we get there before the
-     child starts. */
-  new_thread->p_pid = pid;
-  return 0;
-}
-
-
-/* Try to free the resources of a thread when requested by pthread_join
-   or pthread_detach on a terminated thread. */
-
-static void pthread_free(pthread_descr th)
-{
-  pthread_handle handle;
-  pthread_readlock_info *iter, *next;
-
-  ASSERT(th->p_exited);
-  /* Make the handle invalid */
-  handle =  thread_handle(th->p_tid);
-  __pthread_lock(&handle->h_lock, NULL);
-  handle->h_descr = NULL;
-  handle->h_bottom = (char *)(-1L);
-  __pthread_unlock(&handle->h_lock);
-#ifdef FREE_THREAD
-  FREE_THREAD(th, th->p_nr);
-#endif
-  /* One fewer threads in __pthread_handles */
-  __pthread_handles_num--;
-
-  /* Destroy read lock list, and list of free read lock structures.
-     If the former is not empty, it means the thread exited while
-     holding read locks! */
-
-  for (iter = th->p_readlock_list; iter != NULL; iter = next)
-    {
-      next = iter->pr_next;
-      free(iter);
-    }
-
-  for (iter = th->p_readlock_free; iter != NULL; iter = next)
-    {
-      next = iter->pr_next;
-      free(iter);
-    }
-
-  /* If initial thread, nothing to free */
-  if (!th->p_userstack)
-    {
-      size_t guardsize = th->p_guardsize;
-      /* Free the stack and thread descriptor area */
-      char *guardaddr = th->p_guardaddr;
-#ifdef _STACK_GROWS_UP
-      size_t stacksize = guardaddr - (char *)th;
-      guardaddr = (char *)th;
-#else
-      /* Guardaddr is always set, even if guardsize is 0.  This allows
-	 us to compute everything else.  */
-      size_t stacksize = (char *)(th+1) - guardaddr - guardsize;
-#ifdef NEED_SEPARATE_REGISTER_STACK
-      /* Take account of the register stack, which is below guardaddr.  */
-      guardaddr -= stacksize;
-      stacksize *= 2;
-#endif
-#endif
-      /* Unmap the stack.  */
-      munmap(guardaddr, stacksize + guardsize);
-    }
-}
-
-/* Handle threads that have exited */
-
-static void pthread_exited(pid_t pid)
-{
-  pthread_descr th;
-  int detached;
-  /* Find thread with that pid */
-  for (th = __pthread_main_thread->p_nextlive;
-       th != __pthread_main_thread;
-       th = th->p_nextlive) {
-    if (th->p_pid == pid) {
-      /* Remove thread from list of active threads */
-      th->p_nextlive->p_prevlive = th->p_prevlive;
-      th->p_prevlive->p_nextlive = th->p_nextlive;
-      /* Mark thread as exited, and if detached, free its resources */
-      __pthread_lock(th->p_lock, NULL);
-      th->p_exited = 1;
-      /* If we have to signal this event do it now.  */
-      if (th->p_report_events)
-	{
-	  /* See whether TD_REAP is in any of the mask.  */
-	  int idx = __td_eventword (TD_REAP);
-	  uint32_t mask = __td_eventmask (TD_REAP);
-
-	  if ((mask & (__pthread_threads_events.event_bits[idx]
-		       | th->p_eventbuf.eventmask.event_bits[idx])) != 0)
-	    {
-	      /* Yep, we have to signal the reapage.  */
-	      th->p_eventbuf.eventnum = TD_REAP;
-	      th->p_eventbuf.eventdata = th;
-	      __pthread_last_event = th;
-
-	      /* Now call the function to signal the event.  */
-	      __linuxthreads_reap_event();
-	    }
-	}
-      detached = th->p_detached;
-      __pthread_unlock(th->p_lock);
-      if (detached)
-	pthread_free(th);
-      break;
-    }
-  }
-  /* If all threads have exited and the main thread is pending on a
-     pthread_exit, wake up the main thread and terminate ourselves. */
-  if (main_thread_exiting &&
-      __pthread_main_thread->p_nextlive == __pthread_main_thread) {
-    restart(__pthread_main_thread);
-    /* Same logic as REQ_MAIN_THREAD_EXIT. */
-  }
-}
-
-static void pthread_reap_children(void)
-{
-  pid_t pid;
-  int status;
-
-  while ((pid = __libc___waitpid(-1, &status, WNOHANG | __WCLONE)) > 0) {
-    pthread_exited(pid);
-    if (WIFSIGNALED(status)) {
-      /* If a thread died due to a signal, send the same signal to
-         all other threads, including the main thread. */
-      pthread_kill_all_threads(WTERMSIG(status), 1);
-      _exit(0);
-    }
-  }
-}
-
-/* Try to free the resources of a thread when requested by pthread_join
-   or pthread_detach on a terminated thread. */
-
-static void pthread_handle_free(pthread_t th_id)
-{
-  pthread_handle handle = thread_handle(th_id);
-  pthread_descr th;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (nonexisting_handle(handle, th_id)) {
-    /* pthread_reap_children has deallocated the thread already,
-       nothing needs to be done */
-    __pthread_unlock(&handle->h_lock);
-    return;
-  }
-  th = handle->h_descr;
-  if (th->p_exited) {
-    __pthread_unlock(&handle->h_lock);
-    pthread_free(th);
-  } else {
-    /* The Unix process of the thread is still running.
-       Mark the thread as detached so that the thread manager will
-       deallocate its resources when the Unix process exits. */
-    th->p_detached = 1;
-    __pthread_unlock(&handle->h_lock);
-  }
-}
-
-/* Send a signal to all running threads */
-
-static void pthread_kill_all_threads(int sig, int main_thread_also)
-{
-  pthread_descr th;
-  for (th = __pthread_main_thread->p_nextlive;
-       th != __pthread_main_thread;
-       th = th->p_nextlive) {
-    kill(th->p_pid, sig);
-  }
-  if (main_thread_also) {
-    kill(__pthread_main_thread->p_pid, sig);
-  }
-}
-
-static void pthread_for_each_thread(void *arg, 
-    void (*fn)(void *, pthread_descr))
-{
-  pthread_descr th;
-
-  for (th = __pthread_main_thread->p_nextlive;
-       th != __pthread_main_thread;
-       th = th->p_nextlive) {
-    fn(arg, th);
-  }
-
-  fn(arg, __pthread_main_thread);
-}
-
-/* Process-wide exit() */
-
-static void pthread_handle_exit(pthread_descr issuing_thread, int exitcode)
-{
-  pthread_descr th;
-  __pthread_exit_requested = 1;
-  __pthread_exit_code = exitcode;
-  /* A forced asynchronous cancellation follows.  Make sure we won't
-     get stuck later in the main thread with a system lock being held
-     by one of the cancelled threads.  Ideally one would use the same
-     code as in pthread_atfork(), but we can't distinguish system and
-     user handlers there.  */
-  __flockfilelist();
-  /* Send the CANCEL signal to all running threads, including the main
-     thread, but excluding the thread from which the exit request originated
-     (that thread must complete the exit, e.g. calling atexit functions
-     and flushing stdio buffers). */
-  for (th = issuing_thread->p_nextlive;
-       th != issuing_thread;
-       th = th->p_nextlive) {
-    kill(th->p_pid, __pthread_sig_cancel);
-  }
-  /* Now, wait for all these threads, so that they don't become zombies
-     and their times are properly added to the thread manager's times. */
-  for (th = issuing_thread->p_nextlive;
-       th != issuing_thread;
-       th = th->p_nextlive) {
-    __waitpid(th->p_pid, NULL, __WCLONE);
-  }
-  __fresetlockfiles();
-  restart(issuing_thread);
-  _exit(0);
-}
-
-/* Handler for __pthread_sig_cancel in thread manager thread */
-
-void __pthread_manager_sighandler(int sig)
-{
-  int kick_manager = terminated_children == 0 && main_thread_exiting;
-  terminated_children = 1;
-
-  /* If the main thread is terminating, kick the thread manager loop
-     each time some threads terminate. This eliminates a two second
-     shutdown delay caused by the thread manager sleeping in the
-     call to __poll(). Instead, the thread manager is kicked into
-     action, reaps the outstanding threads and resumes the main thread
-     so that it can complete the shutdown. */
-
-  if (kick_manager) {
-    struct pthread_request request;
-    request.req_thread = 0;
-    request.req_kind = REQ_KICK;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-  }
-}
-
-/* Adjust priority of thread manager so that it always run at a priority
-   higher than all threads */
-
-void __pthread_manager_adjust_prio(int thread_prio)
-{
-  struct sched_param param;
-
-  if (thread_prio <= __pthread_manager_thread.p_priority) return;
-  param.sched_priority =
-    thread_prio < __sched_get_priority_max(SCHED_FIFO)
-    ? thread_prio + 1 : thread_prio;
-  __sched_setscheduler(__pthread_manager_thread.p_pid, SCHED_FIFO, &param);
-  __pthread_manager_thread.p_priority = thread_prio;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/mq_notify.c b/newlib/libc/sys/linux/linuxthreads/mq_notify.c
deleted file mode 100644
index 46492e470..000000000
--- a/newlib/libc/sys/linux/linuxthreads/mq_notify.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <string.h>
-
-#include "internals.h"
-#include <sys/lock.h>
-
-#include "mqlocal.h"
-
-static void *mq_notify_process (void *);
-
-void
-__cleanup_mq_notify (struct libc_mq *info)
-{
-  struct sembuf sb4 = {4, 1, 0};
-  /* kill notification thread and allow other processes to set a notification */
-  pthread_cancel ((pthread_t)info->th);
-  semop (info->semid, &sb4, 1);
-}
-  
-static void *
-mq_notify_process (void *arg)
-{
-  struct libc_mq *info = (struct libc_mq *)arg;
-  struct sembuf sb3[2] = {{3, 0, 0}, {5, 0, 0}};
-  struct sembuf sb4 = {4, 1, 0};
-  int rc;
-
-  /* wait until queue is empty */
-  while (!(rc = semop (info->semid, sb3, 1)) && errno == EINTR)
-    /* empty */ ;
-
-  if (!rc)
-    {
-      /* now wait until there are 0 readers and the queue has something in it */
-      sb3[0].sem_op = -1;
-      while (!(rc = semop (info->semid, sb3, 2)) && errno == EINTR)
-	/* empty */ ;
-      /* restore value since we have not actually performed a read */
-      sb3[0].sem_op = 1;
-      semop (info->semid, sb3, 1);
-      /* perform desired notification - either run function in this thread or pass signal */
-      if (!rc)
-	{
-	  if (info->sigevent->sigev_notify == SIGEV_SIGNAL)
-	    raise (info->sigevent->sigev_signo);
-	  else if (info->sigevent->sigev_notify == SIGEV_THREAD)
-	    info->sigevent->sigev_notify_function (info->sigevent->sigev_value);
-	  /* allow other processes to now mq_notify */
-	  semop (info->semid, &sb4, 1);
-	}
-    }
-  pthread_exit (NULL);
-}
-
-int
-mq_notify (mqd_t msgid, const struct sigevent *notification)
-{
-  struct libc_mq *info;
-  struct sembuf sb4 = {4, -1, IPC_NOWAIT};
-  int rc;
-  pthread_attr_t *attr = NULL;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  /* get notification lock */
-  rc = semop (info->semid, &sb4, 1);
-
-  if (rc == -1)
-    {
-      errno = EBUSY;
-      return -1;
-    }
-
-  /* to get the notification running we use a pthread - if the user has requested
-     an action in a pthread, we use the user's attributes when setting up the thread */
-  info->sigevent = (struct sigevent *)notification;
-  if (info->sigevent->sigev_notify == SIGEV_THREAD)
-    attr = (pthread_attr_t *)info->sigevent->sigev_notify_attributes;
-  rc = pthread_create ((pthread_t *)&info->th, attr, mq_notify_process, (void *)info);
-
-  if (rc != 0)
-    rc = -1;
-  else
-    info->cleanup_notify = &__cleanup_mq_notify;
-
-  return rc;
-}
-
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/linuxthreads/mutex.c b/newlib/libc/sys/linux/linuxthreads/mutex.c
deleted file mode 100644
index fb2e60770..000000000
--- a/newlib/libc/sys/linux/linuxthreads/mutex.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Mutexes */
-
-#include <bits/libc-lock.h>
-#include <errno.h>
-#include <sched.h>
-#include <stddef.h>
-#include <limits.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "queue.h"
-#include "restart.h"
-
-int __pthread_mutex_init(pthread_mutex_t * mutex,
-                       const pthread_mutexattr_t * mutex_attr)
-{
-  __pthread_init_lock(&mutex->__m_lock);
-  mutex->__m_kind =
-    mutex_attr == NULL ? PTHREAD_MUTEX_TIMED_NP : mutex_attr->__mutexkind;
-  mutex->__m_count = 0;
-  mutex->__m_owner = NULL;
-  return 0;
-}
-strong_alias (__pthread_mutex_init, pthread_mutex_init)
-
-int __pthread_mutex_destroy(pthread_mutex_t * mutex)
-{
-  switch (mutex->__m_kind) {
-  case PTHREAD_MUTEX_ADAPTIVE_NP:
-  case PTHREAD_MUTEX_RECURSIVE_NP:
-    if ((mutex->__m_lock.__status & 1) != 0)
-      return EBUSY;
-    return 0;
-  case PTHREAD_MUTEX_ERRORCHECK_NP:
-  case PTHREAD_MUTEX_TIMED_NP:
-    if (mutex->__m_lock.__status != 0)
-      return EBUSY;
-    return 0;
-  default:
-    return EINVAL;
-  }
-}
-strong_alias (__pthread_mutex_destroy, pthread_mutex_destroy)
-
-int __pthread_mutex_trylock(pthread_mutex_t * mutex)
-{
-  pthread_descr self;
-  int retcode;
-
-  switch(mutex->__m_kind) {
-  case PTHREAD_MUTEX_ADAPTIVE_NP:
-    retcode = __pthread_trylock(&mutex->__m_lock);
-    return retcode;
-  case PTHREAD_MUTEX_RECURSIVE_NP:
-    self = thread_self();
-    if (mutex->__m_owner == self) {
-      mutex->__m_count++;
-      return 0;
-    }
-    retcode = __pthread_trylock(&mutex->__m_lock);
-    if (retcode == 0) {
-      mutex->__m_owner = self;
-      mutex->__m_count = 0;
-    }
-    return retcode;
-  case PTHREAD_MUTEX_ERRORCHECK_NP:
-    retcode = __pthread_alt_trylock(&mutex->__m_lock);
-    if (retcode == 0) {
-      mutex->__m_owner = thread_self();
-    }
-    return retcode;
-  case PTHREAD_MUTEX_TIMED_NP:
-    retcode = __pthread_alt_trylock(&mutex->__m_lock);
-    return retcode;
-  default:
-    return EINVAL;
-  }
-}
-strong_alias (__pthread_mutex_trylock, pthread_mutex_trylock)
-
-int __pthread_mutex_lock(pthread_mutex_t * mutex)
-{
-  pthread_descr self;
-
-  switch(mutex->__m_kind) {
-  case PTHREAD_MUTEX_ADAPTIVE_NP:
-    __pthread_lock(&mutex->__m_lock, NULL);
-    return 0;
-  case PTHREAD_MUTEX_RECURSIVE_NP:
-    self = thread_self();
-    if (mutex->__m_owner == self) {
-      mutex->__m_count++;
-      return 0;
-    }
-    __pthread_lock(&mutex->__m_lock, self);
-    mutex->__m_owner = self;
-    mutex->__m_count = 0;
-    return 0;
-  case PTHREAD_MUTEX_ERRORCHECK_NP:
-    self = thread_self();
-    if (mutex->__m_owner == self) return EDEADLK;
-    __pthread_alt_lock(&mutex->__m_lock, self);
-    mutex->__m_owner = self;
-    return 0;
-  case PTHREAD_MUTEX_TIMED_NP:
-    __pthread_alt_lock(&mutex->__m_lock, NULL);
-    return 0;
-  default:
-    return EINVAL;
-  }
-}
-strong_alias (__pthread_mutex_lock, pthread_mutex_lock)
-
-int __pthread_mutex_timedlock (pthread_mutex_t *mutex,
-			       const struct timespec *abstime)
-{
-  pthread_descr self;
-  int res;
-
-  if (__builtin_expect (abstime->tv_nsec, 0) < 0
-      || __builtin_expect (abstime->tv_nsec, 0) >= 1000000000)
-    return EINVAL;
-
-  switch(mutex->__m_kind) {
-  case PTHREAD_MUTEX_ADAPTIVE_NP:
-    __pthread_lock(&mutex->__m_lock, NULL);
-    return 0;
-  case PTHREAD_MUTEX_RECURSIVE_NP:
-    self = thread_self();
-    if (mutex->__m_owner == self) {
-      mutex->__m_count++;
-      return 0;
-    }
-    __pthread_lock(&mutex->__m_lock, self);
-    mutex->__m_owner = self;
-    mutex->__m_count = 0;
-    return 0;
-  case PTHREAD_MUTEX_ERRORCHECK_NP:
-    self = thread_self();
-    if (mutex->__m_owner == self) return EDEADLK;
-    res = __pthread_alt_timedlock(&mutex->__m_lock, self, abstime);
-    if (res != 0)
-      {
-	mutex->__m_owner = self;
-	return 0;
-      }
-    return ETIMEDOUT;
-  case PTHREAD_MUTEX_TIMED_NP:
-    /* Only this type supports timed out lock. */
-    return (__pthread_alt_timedlock(&mutex->__m_lock, NULL, abstime)
-	    ? 0 : ETIMEDOUT);
-  default:
-    return EINVAL;
-  }
-}
-strong_alias (__pthread_mutex_timedlock, pthread_mutex_timedlock)
-
-int __pthread_mutex_unlock(pthread_mutex_t * mutex)
-{
-  switch (mutex->__m_kind) {
-  case PTHREAD_MUTEX_ADAPTIVE_NP:
-    __pthread_unlock(&mutex->__m_lock);
-    return 0;
-  case PTHREAD_MUTEX_RECURSIVE_NP:
-    if (mutex->__m_owner != thread_self())
-      return EPERM;
-    if (mutex->__m_count > 0) {
-      mutex->__m_count--;
-      return 0;
-    }
-    mutex->__m_owner = NULL;
-    __pthread_unlock(&mutex->__m_lock);
-    return 0;
-  case PTHREAD_MUTEX_ERRORCHECK_NP:
-    if (mutex->__m_owner != thread_self() || mutex->__m_lock.__status == 0)
-      return EPERM;
-    mutex->__m_owner = NULL;
-    __pthread_alt_unlock(&mutex->__m_lock);
-    return 0;
-  case PTHREAD_MUTEX_TIMED_NP:
-    __pthread_alt_unlock(&mutex->__m_lock);
-    return 0;
-  default:
-    return EINVAL;
-  }
-}
-strong_alias (__pthread_mutex_unlock, pthread_mutex_unlock)
-
-int __pthread_mutexattr_init(pthread_mutexattr_t *attr)
-{
-  attr->__mutexkind = PTHREAD_MUTEX_TIMED_NP;
-  return 0;
-}
-strong_alias (__pthread_mutexattr_init, pthread_mutexattr_init)
-
-int __pthread_mutexattr_destroy(pthread_mutexattr_t *attr)
-{
-  return 0;
-}
-strong_alias (__pthread_mutexattr_destroy, pthread_mutexattr_destroy)
-
-int __pthread_mutexattr_settype(pthread_mutexattr_t *attr, int kind)
-{
-  if (kind != PTHREAD_MUTEX_ADAPTIVE_NP
-      && kind != PTHREAD_MUTEX_RECURSIVE_NP
-      && kind != PTHREAD_MUTEX_ERRORCHECK_NP
-      && kind != PTHREAD_MUTEX_TIMED_NP)
-    return EINVAL;
-  attr->__mutexkind = kind;
-  return 0;
-}
-weak_alias (__pthread_mutexattr_settype, pthread_mutexattr_settype)
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-strong_alias ( __pthread_mutexattr_settype, __pthread_mutexattr_setkind_np)
-weak_alias (__pthread_mutexattr_setkind_np, pthread_mutexattr_setkind_np)
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-int __pthread_mutexattr_gettype(const pthread_mutexattr_t *attr, int *kind)
-{
-  *kind = attr->__mutexkind;
-  return 0;
-}
-weak_alias (__pthread_mutexattr_gettype, pthread_mutexattr_gettype)
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-strong_alias (__pthread_mutexattr_gettype, __pthread_mutexattr_getkind_np)
-weak_alias (__pthread_mutexattr_getkind_np, pthread_mutexattr_getkind_np)
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-
-int __pthread_mutexattr_getpshared (const pthread_mutexattr_t *attr,
-				   int *pshared)
-{
-  *pshared = PTHREAD_PROCESS_PRIVATE;
-  return 0;
-}
-weak_alias (__pthread_mutexattr_getpshared, pthread_mutexattr_getpshared)
-
-int __pthread_mutexattr_setpshared (pthread_mutexattr_t *attr, int pshared)
-{
-  if (pshared != PTHREAD_PROCESS_PRIVATE && pshared != PTHREAD_PROCESS_SHARED)
-    return EINVAL;
-
-  /* For now it is not possible to shared a conditional variable.  */
-  if (pshared != PTHREAD_PROCESS_PRIVATE)
-    return ENOSYS;
-
-  return 0;
-}
-weak_alias (__pthread_mutexattr_setpshared, pthread_mutexattr_setpshared)
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 3 */
-
-/* Once-only execution */
-
-static pthread_mutex_t once_masterlock = PTHREAD_MUTEX_INITIALIZER;
-static pthread_cond_t once_finished = PTHREAD_COND_INITIALIZER;
-static int fork_generation = 0;	/* Child process increments this after fork. */
-
-enum { NEVER = 0, IN_PROGRESS = 1, DONE = 2 };
-
-/* If a thread is canceled while calling the init_routine out of
-   pthread once, this handler will reset the once_control variable
-   to the NEVER state. */
-
-static void pthread_once_cancelhandler(void *arg)
-{
-    pthread_once_t *once_control = arg;
-
-    pthread_mutex_lock(&once_masterlock);
-    *once_control = NEVER;
-    pthread_mutex_unlock(&once_masterlock);
-    pthread_cond_broadcast(&once_finished);
-}
-
-int __pthread_once(pthread_once_t * once_control, void (*init_routine)(void))
-{
-  /* flag for doing the condition broadcast outside of mutex */
-  int state_changed;
-
-  /* Test without locking first for speed */
-  if (*once_control == DONE) {
-    READ_MEMORY_BARRIER();
-    return 0;
-  }
-  /* Lock and test again */
-
-  state_changed = 0;
-
-  pthread_mutex_lock(&once_masterlock);
-
-  /* If this object was left in an IN_PROGRESS state in a parent
-     process (indicated by stale generation field), reset it to NEVER. */
-  if ((*once_control & 3) == IN_PROGRESS && (*once_control & ~3) != fork_generation)
-    *once_control = NEVER;
-
-  /* If init_routine is being called from another routine, wait until
-     it completes. */
-  while ((*once_control & 3) == IN_PROGRESS) {
-    pthread_cond_wait(&once_finished, &once_masterlock);
-  }
-  /* Here *once_control is stable and either NEVER or DONE. */
-  if (*once_control == NEVER) {
-    *once_control = IN_PROGRESS | fork_generation;
-    pthread_mutex_unlock(&once_masterlock);
-    pthread_cleanup_push(pthread_once_cancelhandler, once_control);
-    init_routine();
-    pthread_cleanup_pop(0);
-    pthread_mutex_lock(&once_masterlock);
-    WRITE_MEMORY_BARRIER();
-    *once_control = DONE;
-    state_changed = 1;
-  }
-  pthread_mutex_unlock(&once_masterlock);
-
-  if (state_changed)
-    pthread_cond_broadcast(&once_finished);
-
-  return 0;
-}
-strong_alias (__pthread_once, pthread_once)
-
-/*
- * Handle the state of the pthread_once mechanism across forks.  The
- * once_masterlock is acquired in the parent process prior to a fork to ensure
- * that no thread is in the critical region protected by the lock.  After the
- * fork, the lock is released. In the child, the lock and the condition
- * variable are simply reset.  The child also increments its generation
- * counter which lets pthread_once calls detect stale IN_PROGRESS states
- * and reset them back to NEVER.
- */
-
-void __pthread_once_fork_prepare(void)
-{
-  pthread_mutex_lock(&once_masterlock);
-}
-
-void __pthread_once_fork_parent(void)
-{
-  pthread_mutex_unlock(&once_masterlock);
-}
-
-void __pthread_once_fork_child(void)
-{
-  pthread_mutex_init(&once_masterlock, NULL);
-  pthread_cond_init(&once_finished, NULL);
-  if (fork_generation <= INT_MAX - 4)
-    fork_generation += 4;	/* leave least significant two bits zero */
-  else
-    fork_generation = 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/no-tsd.c b/newlib/libc/sys/linux/linuxthreads/no-tsd.c
deleted file mode 100644
index 84abb6f40..000000000
--- a/newlib/libc/sys/linux/linuxthreads/no-tsd.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* libc-internal interface for thread-specific data.
-   Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <sys/cdefs.h>  /* for __const */
-#include <bits/libc-tsd.h>
-
-/* This file provides uinitialized (common) definitions for the
-   hooks used internally by libc to access thread-specific data.
-
-   When -lpthread is used, it provides initialized definitions for these
-   variables (in specific.c), which override these uninitialized definitions.
-
-   If -lpthread is not used, these uninitialized variables default to zero,
-   which the __libc_tsd_* macros check for.   */
-
-void *(*__libc_internal_tsd_get) (enum __libc_tsd_key_t);
-int (*__libc_internal_tsd_set) (enum __libc_tsd_key_t,
-				__const void *);
diff --git a/newlib/libc/sys/linux/linuxthreads/oldsemaphore.c b/newlib/libc/sys/linux/linuxthreads/oldsemaphore.c
deleted file mode 100644
index 80a82dfcf..000000000
--- a/newlib/libc/sys/linux/linuxthreads/oldsemaphore.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * This file contains the old semaphore code that we need to
- * preserve for glibc-2.0 backwards compatibility. Port to glibc 2.1
- * done by Cristian Gafton.
- */
-
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Semaphores a la POSIX 1003.1b */
-#include <shlib-compat.h>
-#if SHLIB_COMPAT(libpthread, GLIBC_2_0, GLIBC_2_1)
-
-#include <errno.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-#include "queue.h"
-
-typedef struct {
-    long int sem_status;
-    int sem_spinlock;
-} old_sem_t;
-
-extern int __old_sem_init (old_sem_t *__sem, int __pshared, unsigned int __value);
-extern int __old_sem_wait (old_sem_t *__sem);
-extern int __old_sem_trywait (old_sem_t *__sem);
-extern int __old_sem_post (old_sem_t *__sem);
-extern int __old_sem_getvalue (old_sem_t *__sem, int *__sval);
-extern int __old_sem_destroy (old_sem_t *__sem);
-
-
-/* Maximum value the semaphore can have.  */
-#define SEM_VALUE_MAX   ((int) ((~0u) >> 1))
-
-static inline int sem_compare_and_swap(old_sem_t *sem, long oldval, long newval)
-{
-    return compare_and_swap(&sem->sem_status, oldval, newval, &sem->sem_spinlock);
-}
-
-/* The state of a semaphore is represented by a long int encoding
-   either the semaphore count if >= 0 and no thread is waiting on it,
-   or the head of the list of threads waiting for the semaphore.
-   To distinguish the two cases, we encode the semaphore count N
-   as 2N+1, so that it has the lowest bit set.
-
-   A sequence of sem_wait operations on a semaphore initialized to N
-   result in the following successive states:
-     2N+1, 2N-1, ..., 3, 1, &first_waiting_thread, &second_waiting_thread, ...
-*/
-
-static void sem_restart_list(pthread_descr waiting);
-
-int __old_sem_init(old_sem_t *sem, int pshared, unsigned int value)
-{
-    if (value > SEM_VALUE_MAX) {
-	errno = EINVAL;
-	return -1;
-    }
-    if (pshared) {
-	errno = ENOSYS;
-	return -1;
-    }
-  sem->sem_spinlock = __LT_SPINLOCK_INIT;
-  sem->sem_status = ((long)value << 1) + 1;
-  return 0;
-}
-
-/* Function called by pthread_cancel to remove the thread from
-   waiting inside __old_sem_wait. Here we simply unconditionally
-   indicate that the thread is to be woken, by returning 1. */
-
-static int old_sem_extricate_func(void *obj, pthread_descr th)
-{
-    return 1;
-}
-
-int __old_sem_wait(old_sem_t * sem)
-{
-    long oldstatus, newstatus;
-    volatile pthread_descr self = thread_self();
-    pthread_descr * th;
-    pthread_extricate_if extr;
-
-    /* Set up extrication interface */
-    extr.pu_object = 0;
-    extr.pu_extricate_func = old_sem_extricate_func;
-
-    while (1) {
-	/* Register extrication interface */
-	__pthread_set_own_extricate_if(self, &extr);
-	do {
-            oldstatus = sem->sem_status;
-            if ((oldstatus & 1) && (oldstatus != 1))
-		newstatus = oldstatus - 2;
-            else {
-		newstatus = (long) self;
-		self->p_nextwaiting = (pthread_descr) oldstatus;
-	    }
-	}
-	while (! sem_compare_and_swap(sem, oldstatus, newstatus));
-	if (newstatus & 1) {
-	    /* We got the semaphore. */
-	    __pthread_set_own_extricate_if(self, 0);
-	    self->p_nextwaiting = NULL;
-	    return 0;
-	}
-	/* Wait for sem_post or cancellation */
-	suspend(self);
-	__pthread_set_own_extricate_if(self, 0);
-
-	/* This is a cancellation point */
-	if (self->p_canceled && self->p_cancelstate == PTHREAD_CANCEL_ENABLE) {
-	    /* Remove ourselves from the waiting list if we're still on it */
-	    /* First check if we're at the head of the list. */
-            do {
-		oldstatus = sem->sem_status;
-		if (oldstatus != (long) self) break;
-		newstatus = (long) self->p_nextwaiting;
-	    }
-            while (! sem_compare_and_swap(sem, oldstatus, newstatus));
-            /* Now, check if we're somewhere in the list.
-	       There's a race condition with sem_post here, but it does not matter:
-	       the net result is that at the time pthread_exit is called,
-	       self is no longer reachable from sem->sem_status. */
-            if (oldstatus != (long) self && (oldstatus & 1) == 0) {
-		for (th = &(((pthread_descr) oldstatus)->p_nextwaiting);
-		     *th != NULL && *th != (pthread_descr) 1;
-		     th = &((*th)->p_nextwaiting)) {
-		    if (*th == self) {
-			*th = self->p_nextwaiting;
-			break;
-		    }
-		}
-	    }
-            __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-	}
-    }
-}
-
-int __old_sem_trywait(old_sem_t * sem)
-{
-  long oldstatus, newstatus;
-
-  do {
-    oldstatus = sem->sem_status;
-    if ((oldstatus & 1) == 0 || (oldstatus == 1)) {
-      errno = EAGAIN;
-      return -1;
-    }
-    newstatus = oldstatus - 2;
-  }
-  while (! sem_compare_and_swap(sem, oldstatus, newstatus));
-  return 0;
-}
-
-int __old_sem_post(old_sem_t * sem)
-{
-  long oldstatus, newstatus;
-
-  do {
-    oldstatus = sem->sem_status;
-    if ((oldstatus & 1) == 0)
-      newstatus = 3;
-    else {
-      if (oldstatus >= SEM_VALUE_MAX) {
-        /* Overflow */
-        errno = ERANGE;
-        return -1;
-      }
-      newstatus = oldstatus + 2;
-    }
-  }
-  while (! sem_compare_and_swap(sem, oldstatus, newstatus));
-  if ((oldstatus & 1) == 0)
-    sem_restart_list((pthread_descr) oldstatus);
-  return 0;
-}
-
-int __old_sem_getvalue(old_sem_t * sem, int * sval)
-{
-  long status = sem->sem_status;
-  if (status & 1)
-    *sval = (int)((unsigned long) status >> 1);
-  else
-    *sval = 0;
-  return 0;
-}
-
-int __old_sem_destroy(old_sem_t * sem)
-{
-  if ((sem->sem_status & 1) == 0) {
-    errno = EBUSY;
-    return -1;
-  }
-  return 0;
-}
-
-/* Auxiliary function for restarting all threads on a waiting list,
-   in priority order. */
-
-static void sem_restart_list(pthread_descr waiting)
-{
-  pthread_descr th, towake, *p;
-
-  /* Sort list of waiting threads by decreasing priority (insertion sort) */
-  towake = NULL;
-  while (waiting != (pthread_descr) 1) {
-    th = waiting;
-    waiting = waiting->p_nextwaiting;
-    p = &towake;
-    while (*p != NULL && th->p_priority < (*p)->p_priority)
-      p = &((*p)->p_nextwaiting);
-    th->p_nextwaiting = *p;
-    *p = th;
-  }
-  /* Wake up threads in priority order */
-  while (towake != NULL) {
-    th = towake;
-    towake = towake->p_nextwaiting;
-    th->p_nextwaiting = NULL;
-    restart(th);
-  }
-}
-
-compat_symbol (libpthread, __old_sem_init, sem_init, GLIBC_2_0);
-compat_symbol (libpthread, __old_sem_wait, sem_wait, GLIBC_2_0);
-compat_symbol (libpthread, __old_sem_trywait, sem_trywait, GLIBC_2_0);
-compat_symbol (libpthread, __old_sem_post, sem_post, GLIBC_2_0);
-compat_symbol (libpthread, __old_sem_getvalue, sem_getvalue, GLIBC_2_0);
-compat_symbol (libpthread, __old_sem_destroy, sem_destroy, GLIBC_2_0);
-
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/posix-timer.h b/newlib/libc/sys/linux/linuxthreads/posix-timer.h
deleted file mode 100644
index 0596c18f4..000000000
--- a/newlib/libc/sys/linux/linuxthreads/posix-timer.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* Definitions for POSIX timer implementation on top of LinuxThreads.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <limits.h>
-#include <signal.h>
-#include <linux/time.h>
-
-/* Double linked list.  */
-struct list_links
-{
-  struct list_links *next;
-  struct list_links *prev;
-};
-
-
-/* Forward declaration.  */
-struct timer_node;
-
-
-/* Definitions for an internal thread of the POSIX timer implementation.  */
-struct thread_node
-{
-  struct list_links links;
-  pthread_attr_t attr;
-  pthread_t id;
-  unsigned int exists;
-  struct list_links timer_queue;
-  pthread_cond_t cond;
-  struct timer_node *current_timer;
-  pthread_t captured;
-  clockid_t clock_id;
-};
-
-
-/* Internal representation of a timer.  */
-struct timer_node
-{
-  struct list_links links;
-  struct sigevent event;
-  clockid_t clock;
-  struct itimerspec value;
-  struct timespec expirytime;
-  pthread_attr_t attr;
-  unsigned int abstime;
-  unsigned int armed;
-  enum {
-    TIMER_FREE, TIMER_INUSE, TIMER_DELETED
-  } inuse;
-  struct thread_node *thread;
-  pid_t creator_pid;
-  int refcount;
-};
-
-
-/* Static array with the structures for all the timers.  */
-extern struct timer_node __timer_array[TIMER_MAX];
-
-/* Global lock to protect operation on the lists.  */
-extern pthread_mutex_t __timer_mutex;
-
-/* Variable to protext initialization.  */
-extern pthread_once_t __timer_init_once_control;
-
-/* Nonzero if initialization of timer implementation failed.  */
-extern int __timer_init_failed;
-
-/* Nodes for the threads used to deliver signals.  */
-/* A distinct thread is used for each clock type.  */
-
-extern struct thread_node __timer_signal_thread_rclk;
-#ifdef _POSIX_CPUTIME
-extern struct thread_node __timer_signal_thread_pclk;
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-extern struct thread_node __timer_signal_thread_tclk;
-#endif
-
-
-/* Return pointer to timer structure corresponding to ID.  */
-static inline struct timer_node *
-timer_id2ptr (timer_t timerid)
-{
-  if (timerid >= 0 && timerid < TIMER_MAX)
-    return &__timer_array[timerid];
-
-  return NULL;
-}
-
-/* Return ID of TIMER.  */
-static inline int
-timer_ptr2id (struct timer_node *timer)
-{
-  return timer - __timer_array;
-}
-
-/* Check whether timer is valid; global mutex must be held. */
-static inline int
-timer_valid (struct timer_node *timer)
-{
-  return timer && timer->inuse == TIMER_INUSE;
-}
-
-/* Timer refcount functions; need global mutex. */
-extern void __timer_dealloc (struct timer_node *timer);
-
-static inline void
-timer_addref (struct timer_node *timer)
-{
-  timer->refcount++;
-}
-
-static inline void
-timer_delref (struct timer_node *timer)
-{
-  if (--timer->refcount == 0)
-    __timer_dealloc (timer);
-}
-
-/* Timespec helper routines.  */
-static inline int
-timespec_compare (const struct timespec *left, const struct timespec *right)
-{
-  if (left->tv_sec < right->tv_sec)
-    return -1;
-  if (left->tv_sec > right->tv_sec)
-    return 1;
-
-  if (left->tv_nsec < right->tv_nsec)
-    return -1;
-  if (left->tv_nsec > right->tv_nsec)
-    return 1;
-
-  return 0;
-}
-
-static inline void
-timespec_add (struct timespec *sum, const struct timespec *left,
-	      const struct timespec *right)
-{
-  sum->tv_sec = left->tv_sec + right->tv_sec;
-  sum->tv_nsec = left->tv_nsec + right->tv_nsec;
-
-  if (sum->tv_nsec >= 1000000000)
-    {
-      ++sum->tv_sec;
-      sum->tv_nsec -= 1000000000;
-    }
-}
-
-static inline void
-timespec_sub (struct timespec *diff, const struct timespec *left,
-	      const struct timespec *right)
-{
-  diff->tv_sec = left->tv_sec - right->tv_sec;
-  diff->tv_nsec = left->tv_nsec - right->tv_nsec;
-
-  if (diff->tv_nsec < 0)
-    {
-      --diff->tv_sec;
-      diff->tv_nsec += 1000000000;
-    }
-}
-
-
-/* We need one of the list functions in the other modules.  */
-static inline void
-list_unlink_ip (struct list_links *list)
-{
-  struct list_links *lnext = list->next, *lprev = list->prev;
-
-  lnext->prev = lprev;
-  lprev->next = lnext;
-
-  /* The suffix ip means idempotent; list_unlink_ip can be called
-   * two or more times on the same node.
-   */
-
-  list->next = list;
-  list->prev = list;
-}
-
-
-/* Functions in the helper file.  */
-extern void __timer_mutex_cancel_handler (void *arg);
-extern void __timer_init_once (void);
-extern struct timer_node *__timer_alloc (void);
-extern int __timer_thread_start (struct thread_node *thread);
-extern struct thread_node *__timer_thread_find_matching (const pthread_attr_t *desired_attr, clockid_t);
-extern struct thread_node *__timer_thread_alloc (const pthread_attr_t *desired_attr, clockid_t);
-extern void __timer_thread_dealloc (struct thread_node *thread);
-extern int __timer_thread_queue_timer (struct thread_node *thread,
-				       struct timer_node *insert);
-extern void __timer_thread_wakeup (struct thread_node *thread);
diff --git a/newlib/libc/sys/linux/linuxthreads/prio.c b/newlib/libc/sys/linux/linuxthreads/prio.c
deleted file mode 100644
index 475371176..000000000
--- a/newlib/libc/sys/linux/linuxthreads/prio.c
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <stddef.h>
-#include <unistd.h>
-#include <errno.h>
-#include "pthread.h"
-#include "internals.h"
-#include <bits/posix_opt.h>
-
-#ifndef _POSIX_THREAD_PRIO_PROTECT
-int
-__pthread_mutexattr_getprotocol (const pthread_mutexattr_t *attr,
-                                 int *priority)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutexattr_getprotocol,pthread_mutexattr_getprotocol)
-
-int
-__pthread_mutexattr_setprotocol (pthread_mutexattr_t *attr,
-                                 int priority)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutexattr_setprotocol,pthread_mutexattr_setprotocol)
-
-int
-__pthread_mutexattr_getprioceiling (const pthread_mutexattr_t *attr,
-                                    int *prioceiling)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutexattr_getprioceiling,pthread_mutexattr_getprioceiling)
-
-int
-__pthread_mutexattr_setprioceiling (pthread_mutexattr_t *attr,
-                                    int prioceiling)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutexattr_setprioceiling,pthread_mutexattr_setprioceiling)
-#endif /* !_POSIX_THREAD_PRIO_PROTECT */
-
-#if !defined(_POSIX_THREAD_PRIO_PROTECT) && !defined(_POSIX_THREAD_PRIO_INHERIT)
-int
-__pthread_mutex_getprioceiling (const pthread_mutex_t *mutex,
-                                int *prioceiling)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutex_getprioceiling,pthread_mutex_getprioceiling)
-
-int
-__pthread_mutex_setprioceiling (pthread_mutex_t *mutex,
-                                int prioceiling, int *oldceiling)
-{
-  errno = ENOSYS;
-  return ENOSYS;
-}
-weak_alias(__pthread_mutex_setprioceiling,pthread_mutex_setprioceiling)
-#endif /* !_POSIX_THREAD_PRIO_PROTECT && !_POSIX_THREAD_PRIO_INHERIT) */
-
diff --git a/newlib/libc/sys/linux/linuxthreads/proc_service.h b/newlib/libc/sys/linux/linuxthreads/proc_service.h
deleted file mode 100644
index 74136c03e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/proc_service.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* The definitions in this file must correspond to those in the debugger.  */
-#include <sys/procfs.h>
-
-typedef enum
-{
-  PS_OK,          /* generic "call succeeded" */
-  PS_ERR,         /* generic. */
-  PS_BADPID,      /* bad process handle */
-  PS_BADLID,      /* bad lwp identifier */
-  PS_BADADDR,     /* bad address */
-  PS_NOSYM,       /* p_lookup() could not find given symbol */
-        PS_NOFREGS
-  /*
-   * FPU register set not available for given
-   * lwp
-   */
-}       ps_err_e;
-
-
-struct ps_prochandle;		/* user defined. */
-
-
-extern ps_err_e ps_pdread(struct ps_prochandle *,
-                        psaddr_t, void *, size_t);
-extern ps_err_e ps_pdwrite(struct ps_prochandle *,
-                        psaddr_t, const void *, size_t);
-extern ps_err_e ps_ptread(struct ps_prochandle *,
-                        psaddr_t, void *, size_t);
-extern ps_err_e ps_ptwrite(struct ps_prochandle *,
-                        psaddr_t, const void *, size_t);
-
-extern ps_err_e ps_pglobal_lookup(struct ps_prochandle *,
-        const char *object_name, const char *sym_name, psaddr_t *sym_addr);
-
-
-extern ps_err_e ps_lgetregs(struct ps_prochandle *,
-                        lwpid_t, prgregset_t);
-extern ps_err_e ps_lsetregs(struct ps_prochandle *,
-                        lwpid_t, const prgregset_t);
-extern ps_err_e ps_lgetfpregs(struct ps_prochandle *,
-                        lwpid_t, prfpregset_t *);
-extern ps_err_e ps_lsetfpregs(struct ps_prochandle *,
-                        lwpid_t, const prfpregset_t *);
-
-extern pid_t ps_getpid (struct ps_prochandle *);
-
-
-extern ps_err_e ps_pstop (const struct ps_prochandle *);
-extern ps_err_e ps_pcontinue (const struct ps_prochandle *);
-
-extern ps_err_e ps_lstop (const struct ps_prochandle *, lwpid_t);
-extern ps_err_e ps_lcontinue (const struct ps_prochandle *, lwpid_t);
diff --git a/newlib/libc/sys/linux/linuxthreads/pt-machine.c b/newlib/libc/sys/linux/linuxthreads/pt-machine.c
deleted file mode 100644
index f6298c47a..000000000
--- a/newlib/libc/sys/linux/linuxthreads/pt-machine.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* "Instantiation of machine-dependent pthreads inline functions.
-   Copyright (C) 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#define PT_EI
-
-extern long int testandset (int *spinlock);
-extern int __compare_and_swap (long int *p, long int oldval, long int newval);
-
-#include <pt-machine.h>
diff --git a/newlib/libc/sys/linux/linuxthreads/ptclock_gettime.c b/newlib/libc/sys/linux/linuxthreads/ptclock_gettime.c
deleted file mode 100644
index 3323edbcd..000000000
--- a/newlib/libc/sys/linux/linuxthreads/ptclock_gettime.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <time.h>
-#include <libc-internal.h>
-#include "internals.h"
-
-
-#if HP_TIMING_AVAIL
-int
-__pthread_clock_gettime (hp_timing_t freq, struct timespec *tp)
-{
-  hp_timing_t tsc;
-  pthread_descr self = thread_self ();
-
-  /* Get the current counter.  */
-  HP_TIMING_NOW (tsc);
-
-  /* Compute the offset since the start time of the process.  */
-  tsc -= THREAD_GETMEM (self, p_cpuclock_offset);
-
-  /* Compute the seconds.  */
-  tp->tv_sec = tsc / freq;
-
-  /* And the nanoseconds.  This computation should be stable until
-     we get machines with about 16GHz frequency.  */
-  tp->tv_nsec = ((tsc % freq) * 1000000000ull) / freq;
-
-  return 0;
-}
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/ptclock_settime.c b/newlib/libc/sys/linux/linuxthreads/ptclock_settime.c
deleted file mode 100644
index e293e0dfb..000000000
--- a/newlib/libc/sys/linux/linuxthreads/ptclock_settime.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <time.h>
-#include <libc-internal.h>
-#include "internals.h"
-
-
-#if HP_TIMING_AVAIL
-void
-__pthread_clock_settime (hp_timing_t offset)
-{
-  pthread_descr self = thread_self ();
-
-  /* Compute the offset since the start time of the process.  */
-  THREAD_SETMEM (self, p_cpuclock_offset, offset);
-}
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/ptfork.c b/newlib/libc/sys/linux/linuxthreads/ptfork.c
deleted file mode 100644
index 6e31b772c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/ptfork.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* The "atfork" stuff */
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include "pthread.h"
-#include "internals.h"
-#include <bits/libc-lock.h>
-
-struct handler_list {
-  void (*handler)(void);
-  struct handler_list * next;
-};
-
-static pthread_mutex_t pthread_atfork_lock = PTHREAD_MUTEX_INITIALIZER;
-static struct handler_list * pthread_atfork_prepare = NULL;
-static struct handler_list * pthread_atfork_parent = NULL;
-static struct handler_list * pthread_atfork_child = NULL;
-
-static void pthread_insert_list(struct handler_list ** list,
-                                void (*handler)(void),
-                                struct handler_list * newlist,
-                                int at_end)
-{
-  if (handler == NULL) return;
-  if (at_end) {
-    while(*list != NULL) list = &((*list)->next);
-  }
-  newlist->handler = handler;
-  newlist->next = *list;
-  *list = newlist;
-}
-
-struct handler_list_block {
-  struct handler_list prepare, parent, child;
-};
-
-int __pthread_atfork(void (*prepare)(void),
-		     void (*parent)(void),
-		     void (*child)(void))
-{
-  struct handler_list_block * block =
-    (struct handler_list_block *) malloc(sizeof(struct handler_list_block));
-  if (block == NULL) return ENOMEM;
-  pthread_mutex_lock(&pthread_atfork_lock);
-  /* "prepare" handlers are called in LIFO */
-  pthread_insert_list(&pthread_atfork_prepare, prepare, &block->prepare, 0);
-  /* "parent" handlers are called in FIFO */
-  pthread_insert_list(&pthread_atfork_parent, parent, &block->parent, 1);
-  /* "child" handlers are called in FIFO */
-  pthread_insert_list(&pthread_atfork_child, child, &block->child, 1);
-  pthread_mutex_unlock(&pthread_atfork_lock);
-  return 0;
-}
-strong_alias (__pthread_atfork, pthread_atfork)
-
-static inline void pthread_call_handlers(struct handler_list * list)
-{
-  for (/*nothing*/; list != NULL; list = list->next) (list->handler)();
-}
-
-extern int __libc_fork(void);
-
-pid_t __fork(void)
-{
-  pid_t pid;
-
-  pthread_mutex_lock(&pthread_atfork_lock);
-
-  pthread_call_handlers(pthread_atfork_prepare);
-  __pthread_once_fork_prepare();
-  __flockfilelist();
-
-  pid = __libc_fork();
-
-  if (pid == 0) {
-    __pthread_reset_main_thread();
-
-    __fresetlockfiles();
-    __pthread_once_fork_child();
-    pthread_call_handlers(pthread_atfork_child);
-
-    pthread_mutex_init(&pthread_atfork_lock, NULL);
-  } else {
-    __funlockfilelist();
-    __pthread_once_fork_parent();
-    pthread_call_handlers(pthread_atfork_parent);
-
-    pthread_mutex_unlock(&pthread_atfork_lock);
-  }
-
-  return pid;
-}
-
-weak_alias (__fork, fork);
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-
-pid_t __vfork(void)
-{
-  return __fork();
-}
-weak_alias (__vfork, vfork);
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 4 */
diff --git a/newlib/libc/sys/linux/linuxthreads/pthread.c b/newlib/libc/sys/linux/linuxthreads/pthread.c
deleted file mode 100644
index b42d9d60a..000000000
--- a/newlib/libc/sys/linux/linuxthreads/pthread.c
+++ /dev/null
@@ -1,1248 +0,0 @@
-
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Thread creation, initialization, and basic low-level routines */
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/wait.h>
-#include <sys/resource.h>
-#include <sys/sysctl.h>
-#include <shlib-compat.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-#include <machine/syscall.h>
-
-/* for threading we use processes so we require a few EL/IX level 2 and 
-   level 3 syscalls.  We only allow this file to see them to preserve
-   the interface. */
-#if defined(_ELIX_LEVEL) && _ELIX_LEVEL < 3
-static _syscall1_base(int,pipe,int *,filedes)
-#endif /* _ELIX_LEVEL < 3 */
-
-#if defined(_ELIX_LEVEL) && _ELIX_LEVEL < 2
-static _syscall2_base(int,setrlimit,int,resource,const struct rlimit *,rlp)
-int on_exit (void (*fn)(int, void *), void *arg)
-{
-  register struct _atexit *p;
-  void (*x)(void) = (void (*)(void))fn;
-
-/* _REENT_SMALL on_exit() doesn't allow more than the required 32 entries.  */
-#ifndef _REENT_SMALL
-  if ((p = _REENT->_atexit) == NULL)
-    _REENT->_atexit = p = &_REENT->_atexit0;
-  if (p->_ind >= _ATEXIT_SIZE)
-    {
-      if ((p = (struct _atexit *) malloc (sizeof *p)) == NULL)
-        return -1;
-      p->_ind = 0;
-      p->_fntypes = 0;
-      p->_next = _REENT->_atexit;
-      _REENT->_atexit = p;
-    }
-#else
-  p = &_REENT->_atexit;
-  if (p->_ind >= _ATEXIT_SIZE)
-    return -1;
-#endif
-  p->_fntypes |= (1 << p->_ind);
-  p->_fnargs[p->_ind] = arg;
-  p->_fns[p->_ind++] = x;
-  return 0;
-}
-
-#endif /* _ELIX_LEVEL < 2 */
-
-/* We need the global/static resolver state here.  */
-#include <resolv.h>
-#undef _res
-
-/* FIXME: for now, set up _res here */
-struct __res_state _res;
-
-/* Sanity check.  */
-#if __ASSUME_REALTIME_SIGNALS && !defined __SIGRTMIN
-# error "This must not happen; new kernel assumed but old headers"
-#endif
-
-/* These variables are used by the setup code.  */
-
-/* Descriptor of the initial thread */
-
-struct _pthread_descr_struct __pthread_initial_thread = {
-  {
-    {
-      &__pthread_initial_thread /* pthread_descr self */
-    }
-  },
-  &__pthread_initial_thread,  /* pthread_descr p_nextlive */
-  &__pthread_initial_thread,  /* pthread_descr p_prevlive */
-  NULL,                       /* pthread_descr p_nextwaiting */
-  NULL,			      /* pthread_descr p_nextlock */
-  PTHREAD_THREADS_MAX,        /* pthread_t p_tid */
-  0,                          /* int p_pid */
-  0,                          /* int p_priority */
-  &__pthread_handles[0].h_lock, /* struct _pthread_fastlock * p_lock */
-  0,                          /* int p_signal */
-  NULL,                       /* sigjmp_buf * p_signal_buf */
-  NULL,                       /* sigjmp_buf * p_cancel_buf */
-  0,                          /* char p_terminated */
-  0,                          /* char p_detached */
-  0,                          /* char p_exited */
-  NULL,                       /* void * p_retval */
-  0,                          /* int p_retval */
-  NULL,                       /* pthread_descr p_joining */
-  NULL,                       /* struct _pthread_cleanup_buffer * p_cleanup */
-  0,                          /* char p_cancelstate */
-  0,                          /* char p_canceltype */
-  0,                          /* char p_canceled */
-  &__pthread_initial_thread.p_reent, /* struct _reent *p_reentp */
-  _REENT_INIT(__pthread_initial_thread.p_reent),  /* struct _reent p_reent */
-  NULL,                       /* int *p_h_errnop */
-  0,                          /* int p_h_errno */
-  NULL,                       /* char * p_in_sighandler */
-  0,                          /* char p_sigwaiting */
-  PTHREAD_START_ARGS_INITIALIZER(NULL),
-                              /* struct pthread_start_args p_start_args */
-  {NULL},                     /* void ** p_specific[PTHREAD_KEY_1STLEVEL_SIZE] */
-  {NULL},                     /* void * p_libc_specific[_LIBC_TSD_KEY_N] */
-  1,                          /* int p_userstack */
-  NULL,                       /* void * p_guardaddr */
-  0,                          /* size_t p_guardsize */
-  0,                          /* Always index 0 */
-  0,                          /* int p_report_events */
-  {{{0, }}, 0, NULL},         /* td_eventbuf_t p_eventbuf */
-  __ATOMIC_INITIALIZER,       /* struct pthread_atomic p_resume_count */
-  0,                          /* char p_woken_by_cancel */
-  0,                          /* char p_condvar_avail */
-  0,                          /* char p_sem_avail */
-  NULL,                       /* struct pthread_extricate_if *p_extricate */
-  NULL,	                      /* pthread_readlock_info *p_readlock_list; */
-  NULL,                       /* pthread_readlock_info *p_readlock_free; */
-  0                           /* int p_untracked_readlock_count; */
-};
-
-/* Descriptor of the manager thread; none of this is used but the error
-   variables, the p_pid and p_priority fields,
-   and the address for identification.  */
-
-struct _pthread_descr_struct __pthread_manager_thread = {
-  {
-    {
-      &__pthread_manager_thread /* pthread_descr self */
-    }
-  },
-  NULL,                       /* pthread_descr p_nextlive */
-  NULL,                       /* pthread_descr p_prevlive */
-  NULL,                       /* pthread_descr p_nextwaiting */
-  NULL,			      /* pthread_descr p_nextlock */
-  0,                          /* int p_tid */
-  0,                          /* int p_pid */
-  0,                          /* int p_priority */
-  &__pthread_handles[1].h_lock, /* struct _pthread_fastlock * p_lock */
-  0,                          /* int p_signal */
-  NULL,                       /* sigjmp_buf * p_signal_buf */
-  NULL,                       /* sigjmp_buf * p_cancel_buf */
-  0,                          /* char p_terminated */
-  0,                          /* char p_detached */
-  0,                          /* char p_exited */
-  NULL,                       /* void * p_retval */
-  0,                          /* int p_retval */
-  NULL,                       /* pthread_descr p_joining */
-  NULL,                       /* struct _pthread_cleanup_buffer * p_cleanup */
-  0,                          /* char p_cancelstate */
-  0,                          /* char p_canceltype */
-  0,                          /* char p_canceled */
-  &__pthread_manager_thread.p_reent, /* struct _reent *p_reentp */
-  _REENT_INIT(__pthread_manager_thread.p_reent), /* struct _reent p_reent */
-  NULL,                       /* int *p_h_errnop */
-  0,                          /* int p_h_errno */
-  NULL,                       /* char * p_in_sighandler */
-  0,                          /* char p_sigwaiting */
-  PTHREAD_START_ARGS_INITIALIZER(__pthread_manager),
-                              /* struct pthread_start_args p_start_args */
-  {NULL},                     /* void ** p_specific[PTHREAD_KEY_1STLEVEL_SIZE] */
-  {NULL},                     /* void * p_libc_specific[_LIBC_TSD_KEY_N] */
-  0,                          /* int p_userstack */
-  NULL,                       /* void * p_guardaddr */
-  0,                          /* size_t p_guardsize */
-  1,                          /* Always index 1 */
-  0,                          /* int p_report_events */
-  {{{0, }}, 0, NULL},         /* td_eventbuf_t p_eventbuf */
-  __ATOMIC_INITIALIZER,       /* struct pthread_atomic p_resume_count */
-  0,                          /* char p_woken_by_cancel */
-  0,                          /* char p_condvar_avail */
-  0,                          /* char p_sem_avail */
-  NULL,                       /* struct pthread_extricate_if *p_extricate */
-  NULL,	                      /* pthread_readlock_info *p_readlock_list; */
-  NULL,                       /* pthread_readlock_info *p_readlock_free; */
-  0                           /* int p_untracked_readlock_count; */
-};
-
-/* Pointer to the main thread (the father of the thread manager thread) */
-/* Originally, this is the initial thread, but this changes after fork() */
-
-pthread_descr __pthread_main_thread = &__pthread_initial_thread;
-
-/* Limit between the stack of the initial thread (above) and the
-   stacks of other threads (below). Aligned on a STACK_SIZE boundary. */
-
-char *__pthread_initial_thread_bos;
-
-/* File descriptor for sending requests to the thread manager. */
-/* Initially -1, meaning that the thread manager is not running. */
-
-int __pthread_manager_request = -1;
-
-/* Other end of the pipe for sending requests to the thread manager. */
-
-int __pthread_manager_reader;
-
-/* Limits of the thread manager stack */
-
-char *__pthread_manager_thread_bos;
-char *__pthread_manager_thread_tos;
-
-/* For process-wide exit() */
-
-int __pthread_exit_requested;
-int __pthread_exit_code;
-
-/* Maximum stack size.  */
-size_t __pthread_max_stacksize;
-
-/* Nozero if the machine has more than one processor.  */
-int __pthread_smp_kernel;
-
-
-#if !__ASSUME_REALTIME_SIGNALS
-/* Pointers that select new or old suspend/resume functions
-   based on availability of rt signals. */
-
-void (*__pthread_restart)(pthread_descr) = __pthread_restart_old;
-void (*__pthread_suspend)(pthread_descr) = __pthread_suspend_old;
-int (*__pthread_timedsuspend)(pthread_descr, const struct timespec *) = __pthread_timedsuspend_old;
-#endif	/* __ASSUME_REALTIME_SIGNALS */
-
-/* Communicate relevant LinuxThreads constants to gdb */
-
-const int __pthread_threads_max = PTHREAD_THREADS_MAX;
-const int __pthread_sizeof_handle = sizeof(struct pthread_handle_struct);
-const int __pthread_offsetof_descr = offsetof(struct pthread_handle_struct,
-                                              h_descr);
-const int __pthread_offsetof_pid = offsetof(struct _pthread_descr_struct,
-                                            p_pid);
-const int __linuxthreads_pthread_sizeof_descr
-  = sizeof(struct _pthread_descr_struct);
-
-/* Forward declarations */
-
-static void pthread_onexit_process(int retcode, void *arg);
-#ifndef HAVE_Z_NODELETE
-static void pthread_atexit_process(void *arg, int retcode);
-static void pthread_atexit_retcode(void *arg, int retcode);
-#endif
-static void pthread_handle_sigcancel(int sig);
-static void pthread_handle_sigrestart(int sig);
-static void pthread_handle_sigdebug(int sig);
-
-/* CPU clock handling.  */
-#if HP_TIMING_AVAIL
-extern hp_timing_t _dl_cpuclock_offset;
-#endif
-
-/* Signal numbers used for the communication.
-   In these variables we keep track of the used variables.  If the
-   platform does not support any real-time signals we will define the
-   values to some unreasonable value which will signal failing of all
-   the functions below.  */
-#ifndef __SIGRTMIN
-static int current_rtmin = -1;
-static int current_rtmax = -1;
-int __pthread_sig_restart = SIGUSR1;
-int __pthread_sig_cancel = SIGUSR2;
-int __pthread_sig_debug;
-#else
-static int current_rtmin;
-static int current_rtmax;
-
-#if __SIGRTMAX - __SIGRTMIN >= 3
-int __pthread_sig_restart = __SIGRTMIN;
-int __pthread_sig_cancel = __SIGRTMIN + 1;
-int __pthread_sig_debug = __SIGRTMIN + 2;
-#else
-int __pthread_sig_restart = SIGUSR1;
-int __pthread_sig_cancel = SIGUSR2;
-int __pthread_sig_debug;
-#endif
-
-static int rtsigs_initialized;
-
-#if !__ASSUME_REALTIME_SIGNALS
-# include "testrtsig.h"
-#endif
-
-static void
-init_rtsigs (void)
-{
-#if !__ASSUME_REALTIME_SIGNALS
-  if (__builtin_expect (!kernel_has_rtsig (), 0))
-    {
-      current_rtmin = -1;
-      current_rtmax = -1;
-# if __SIGRTMAX - __SIGRTMIN >= 3
-      __pthread_sig_restart = SIGUSR1;
-      __pthread_sig_cancel = SIGUSR2;
-      __pthread_sig_debug = 0;
-# endif
-    }
-  else
-#endif	/* __ASSUME_REALTIME_SIGNALS */
-    {
-#if __SIGRTMAX - __SIGRTMIN >= 3
-      current_rtmin = __SIGRTMIN + 3;
-# if !__ASSUME_REALTIME_SIGNALS
-      __pthread_restart = __pthread_restart_new;
-      __pthread_suspend = __pthread_wait_for_restart_signal;
-      __pthread_timedsuspend = __pthread_timedsuspend_new;
-# endif /* __ASSUME_REALTIME_SIGNALS */
-#else
-      current_rtmin = __SIGRTMIN;
-#endif
-
-      current_rtmax = __SIGRTMAX;
-    }
-
-  rtsigs_initialized = 1;
-}
-#endif
-
-/* Return number of available real-time signal with highest priority.  */
-int
-__libc_current_sigrtmin (void)
-{
-#ifdef __SIGRTMIN
-  if (__builtin_expect (!rtsigs_initialized, 0))
-    init_rtsigs ();
-#endif
-  return current_rtmin;
-}
-
-/* Return number of available real-time signal with lowest priority.  */
-int
-__libc_current_sigrtmax (void)
-{
-#ifdef __SIGRTMIN
-  if (__builtin_expect (!rtsigs_initialized, 0))
-    init_rtsigs ();
-#endif
-  return current_rtmax;
-}
-
-/* Allocate real-time signal with highest/lowest available
-   priority.  Please note that we don't use a lock since we assume
-   this function to be called at program start.  */
-int
-__libc_allocate_rtsig (int high)
-{
-#ifndef __SIGRTMIN
-  return -1;
-#else
-  if (__builtin_expect (!rtsigs_initialized, 0))
-    init_rtsigs ();
-  if (__builtin_expect (current_rtmin == -1, 0)
-      || __builtin_expect (current_rtmin > current_rtmax, 0))
-    /* We don't have anymore signal available.  */
-    return -1;
-
-  return high ? current_rtmin++ : current_rtmax--;
-#endif
-}
-
-/* The function we use to get the kernel revision.  */
-extern int __sysctl (int *name, int nlen, void *oldval, size_t *oldlenp,
-		     void *newval, size_t newlen);
-
-/* Test whether the machine has more than one processor.  This is not the
-   best test but good enough.  More complicated tests would require `malloc'
-   which is not available at that time.  */
-static int
-is_smp_system (void)
-{
-  static const int sysctl_args[] = { CTL_KERN, KERN_VERSION };
-  char buf[512];
-  size_t reslen = sizeof (buf);
-
-  /* Try reading the number using `sysctl' first.  */
-  if (__sysctl ((int *) sysctl_args,
-		sizeof (sysctl_args) / sizeof (sysctl_args[0]),
-		buf, &reslen, NULL, 0) < 0)
-    {
-      /* This was not successful.  Now try reading the /proc filesystem.  */
-      int fd = __open ("/proc/sys/kernel/version", O_RDONLY);
-      if (__builtin_expect (fd, 0) == -1
-	  || (reslen = __read (fd, buf, sizeof (buf))) <= 0)
-	/* This also didn't work.  We give up and say it's a UP machine.  */
-	buf[0] = '\0';
-
-      __close (fd);
-    }
-
-  return strstr (buf, "SMP") != NULL;
-}
-
-
-/* Initialize the pthread library.
-   Initialization is split in two functions:
-   - a constructor function that blocks the __pthread_sig_restart signal
-     (must do this very early, since the program could capture the signal
-      mask with e.g. sigsetjmp before creating the first thread);
-   - a regular function called from pthread_create when needed. */
-
-static void pthread_initialize(void) __attribute__((constructor));
-
-#ifndef HAVE_Z_NODELETE
-extern void *__dso_handle __attribute__ ((weak));
-#endif
-
-
-/* Do some minimal initialization which has to be done during the
-   startup of the C library.  */
-void
-__pthread_initialize_minimal(void)
-{
-  /* If we have special thread_self processing, initialize that for the
-     main thread now.  */
-#ifdef INIT_THREAD_SELF
-  INIT_THREAD_SELF(&__pthread_initial_thread, 0);
-#endif
-#if HP_TIMING_AVAIL
-  __pthread_initial_thread.p_cpuclock_offset = _dl_cpuclock_offset;
-#endif
-}
-
-
-void
-__pthread_init_max_stacksize(void)
-{
-  struct rlimit limit;
-  size_t max_stack;
-
-  getrlimit(RLIMIT_STACK, &limit);
-#ifdef FLOATING_STACKS
-  if (limit.rlim_cur == RLIM_INFINITY)
-    limit.rlim_cur = ARCH_STACK_MAX_SIZE;
-# ifdef NEED_SEPARATE_REGISTER_STACK
-  max_stack = limit.rlim_cur / 2;
-# else
-  max_stack = limit.rlim_cur;
-# endif
-#else
-  /* Play with the stack size limit to make sure that no stack ever grows
-     beyond STACK_SIZE minus one page (to act as a guard page). */
-# ifdef NEED_SEPARATE_REGISTER_STACK
-  /* STACK_SIZE bytes hold both the main stack and register backing
-     store. The rlimit value applies to each individually.  */
-  max_stack = STACK_SIZE/2 - __getpagesize ();
-# else
-  max_stack = STACK_SIZE - __getpagesize();
-# endif
-  if (limit.rlim_cur > max_stack) {
-    limit.rlim_cur = max_stack;
-    __libc_setrlimit(RLIMIT_STACK, &limit);
-  }
-#endif
-  __pthread_max_stacksize = max_stack;
-}
-
-
-static void pthread_initialize(void)
-{
-  struct sigaction sa;
-  sigset_t mask;
-
-  /* If already done (e.g. by a constructor called earlier!), bail out */
-  if (__pthread_initial_thread_bos != NULL) return;
-#ifdef TEST_FOR_COMPARE_AND_SWAP
-  /* Test if compare-and-swap is available */
-  __pthread_has_cas = compare_and_swap_is_available();
-#endif
-#ifdef FLOATING_STACKS
-  /* We don't need to know the bottom of the stack.  Give the pointer some
-     value to signal that initialization happened.  */
-  __pthread_initial_thread_bos = (void *) -1l;
-#else
-  /* Determine stack size limits .  */
-  __pthread_init_max_stacksize ();
-# ifdef _STACK_GROWS_UP
-  /* The initial thread already has all the stack it needs */
-  __pthread_initial_thread_bos = (char *)
-    ((long)CURRENT_STACK_FRAME &~ (STACK_SIZE - 1));
-# else
-  /* For the initial stack, reserve at least STACK_SIZE bytes of stack
-     below the current stack address, and align that on a
-     STACK_SIZE boundary. */
-  __pthread_initial_thread_bos =
-    (char *)(((long)CURRENT_STACK_FRAME - 2 * STACK_SIZE) & ~(STACK_SIZE - 1));
-# endif
-#endif
-  /* Update the descriptor for the initial thread. */
-  __pthread_initial_thread.p_pid = __getpid();
-  /* Likewise for the resolver state _res.  */
-  __pthread_initial_thread.p_resp = &_res;
-#ifdef __SIGRTMIN
-  /* Initialize real-time signals. */
-  init_rtsigs ();
-#endif
-  /* Setup signal handlers for the initial thread.
-     Since signal handlers are shared between threads, these settings
-     will be inherited by all other threads. */
-  sa.sa_handler = pthread_handle_sigrestart;
-  sigemptyset(&sa.sa_mask);
-  sa.sa_flags = 0;
-  __libc_sigaction(__pthread_sig_restart, &sa, NULL);
-  sa.sa_handler = pthread_handle_sigcancel;
-  // sa.sa_flags = 0;
-  __libc_sigaction(__pthread_sig_cancel, &sa, NULL);
-  if (__pthread_sig_debug > 0) {
-    sa.sa_handler = pthread_handle_sigdebug;
-    sigemptyset(&sa.sa_mask);
-    // sa.sa_flags = 0;
-    __libc_sigaction(__pthread_sig_debug, &sa, NULL);
-  }
-  /* Initially, block __pthread_sig_restart. Will be unblocked on demand. */
-  sigemptyset(&mask);
-  sigaddset(&mask, __pthread_sig_restart);
-  sigprocmask(SIG_BLOCK, &mask, NULL);
-  /* Register an exit function to kill all other threads. */
-  /* Do it early so that user-registered atexit functions are called
-     before pthread_*exit_process. */
-#ifndef HAVE_Z_NODELETE
-  if (__builtin_expect (&__dso_handle != NULL, 1))
-    __cxa_atexit ((void (*) (void *)) pthread_atexit_process, NULL,
-		  __dso_handle);
-  else
-#endif
-    on_exit (pthread_onexit_process, NULL);
-  /* How many processors.  */
-  __pthread_smp_kernel = is_smp_system ();
-}
-
-void __pthread_initialize(void)
-{
-  pthread_initialize();
-}
-
-int __pthread_initialize_manager(void)
-{
-  int manager_pipe[2];
-  int pid;
-  struct pthread_request request;
-
-#ifndef HAVE_Z_NODELETE
-  if (__builtin_expect (&__dso_handle != NULL, 1))
-    __cxa_atexit ((void (*) (void *)) pthread_atexit_retcode, NULL,
-		  __dso_handle);
-#endif
-
-  if (__pthread_max_stacksize == 0)
-    __pthread_init_max_stacksize ();
-  /* If basic initialization not done yet (e.g. we're called from a
-     constructor run before our constructor), do it now */
-  if (__pthread_initial_thread_bos == NULL) pthread_initialize();
-  /* Setup stack for thread manager */
-  __pthread_manager_thread_bos = malloc(THREAD_MANAGER_STACK_SIZE);
-  if (__pthread_manager_thread_bos == NULL) return -1;
-  __pthread_manager_thread_tos =
-    __pthread_manager_thread_bos + THREAD_MANAGER_STACK_SIZE;
-  /* Setup pipe to communicate with thread manager */
-  if (__libc_pipe(manager_pipe) == -1) {
-    free(__pthread_manager_thread_bos);
-    return -1;
-  }
-  /* Start the thread manager */
-  pid = 0;
-  if (__builtin_expect (__pthread_initial_thread.p_report_events, 0))
-    {
-      /* It's a bit more complicated.  We have to report the creation of
-	 the manager thread.  */
-      int idx = __td_eventword (TD_CREATE);
-      uint32_t mask = __td_eventmask (TD_CREATE);
-
-      if ((mask & (__pthread_threads_events.event_bits[idx]
-		   | __pthread_initial_thread.p_eventbuf.eventmask.event_bits[idx]))
-	  != 0)
-	{
-	  __pthread_lock(__pthread_manager_thread.p_lock, NULL);
-
-#ifdef NEED_SEPARATE_REGISTER_STACK
-	  pid = __clone2(__pthread_manager_event,
-			 (void **) __pthread_manager_thread_bos,
-			 THREAD_MANAGER_STACK_SIZE,
-			 CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-			 (void *)(long)manager_pipe[0]);
-#elif _STACK_GROWS_UP
-	  pid = __clone(__pthread_manager_event,
-			(void **) __pthread_manager_thread_bos,
-			CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-			(void *)(long)manager_pipe[0]);
-#else
-	  pid = __clone(__pthread_manager_event,
-			(void **) __pthread_manager_thread_tos,
-			CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-			(void *)(long)manager_pipe[0]);
-#endif
-
-	  if (pid != -1)
-	    {
-	      /* Now fill in the information about the new thread in
-	         the newly created thread's data structure.  We cannot let
-	         the new thread do this since we don't know whether it was
-	         already scheduled when we send the event.  */
-	      __pthread_manager_thread.p_eventbuf.eventdata =
-		&__pthread_manager_thread;
-	      __pthread_manager_thread.p_eventbuf.eventnum = TD_CREATE;
-	      __pthread_last_event = &__pthread_manager_thread;
-	      __pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
-	      __pthread_manager_thread.p_pid = pid;
-
-	      /* Now call the function which signals the event.  */
-	      __linuxthreads_create_event ();
-	    }
-
-	  /* Now restart the thread.  */
-	  __pthread_unlock(__pthread_manager_thread.p_lock);
-	}
-    }
-
-  if (__builtin_expect (pid, 0) == 0)
-    {
-#ifdef NEED_SEPARATE_REGISTER_STACK
-      pid = __clone2(__pthread_manager, (void **) __pthread_manager_thread_bos,
-		     THREAD_MANAGER_STACK_SIZE,
-		     CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-		     (void *)(long)manager_pipe[0]);
-#elif _STACK_GROWS_UP
-      pid = __clone(__pthread_manager, (void **) __pthread_manager_thread_bos,
-		    CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-		    (void *)(long)manager_pipe[0]);
-#else
-      pid = __clone(__pthread_manager, (void **) __pthread_manager_thread_tos,
-		    CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND,
-		    (void *)(long)manager_pipe[0]);
-#endif
-    }
-  if (__builtin_expect (pid, 0) == -1) {
-    free(__pthread_manager_thread_bos);
-    __libc_close(manager_pipe[0]);
-    __libc_close(manager_pipe[1]);
-    return -1;
-  }
-  __pthread_manager_request = manager_pipe[1]; /* writing end */
-  __pthread_manager_reader = manager_pipe[0]; /* reading end */
-  __pthread_manager_thread.p_tid = 2* PTHREAD_THREADS_MAX + 1;
-  __pthread_manager_thread.p_pid = pid;
-  /* Make gdb aware of new thread manager */
-  if (__builtin_expect (__pthread_threads_debug, 0) && __pthread_sig_debug > 0)
-    {
-      raise(__pthread_sig_debug);
-      /* We suspend ourself and gdb will wake us up when it is
-	 ready to handle us. */
-      __pthread_wait_for_restart_signal(thread_self());
-    }
-  /* Synchronize debugging of the thread manager */
-  request.req_kind = REQ_DEBUG;
-  TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				  (char *) &request, sizeof(request)));
-  return 0;
-}
-
-/* Thread creation */
-
-int __pthread_create_2_1(pthread_t *thread, const pthread_attr_t *attr,
-			 void * (*start_routine)(void *), void *arg)
-{
-  pthread_descr self = thread_self();
-  struct pthread_request request;
-  int retval;
-  if (__builtin_expect (__pthread_manager_request, 0) < 0) {
-    if (__pthread_initialize_manager() < 0) return EAGAIN;
-  }
-  request.req_thread = self;
-  request.req_kind = REQ_CREATE;
-  request.req_args.create.attr = attr;
-  request.req_args.create.fn = start_routine;
-  request.req_args.create.arg = arg;
-  sigprocmask(SIG_SETMASK, (const sigset_t *) NULL,
-              &request.req_args.create.mask);
-  TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				  (char *) &request, sizeof(request)));
-  suspend(self);
-  retval = THREAD_GETMEM(self, p_retcode);
-  if (__builtin_expect (retval, 0) == 0)
-    *thread = (pthread_t) THREAD_GETMEM(self, p_retval);
-  return retval;
-}
-
-versioned_symbol (libpthread, __pthread_create_2_1, pthread_create, GLIBC_2_1);
-
-#if SHLIB_COMPAT (libpthread, GLIBC_2_0, GLIBC_2_1)
-
-int __pthread_create_2_0(pthread_t *thread, const pthread_attr_t *attr,
-			 void * (*start_routine)(void *), void *arg)
-{
-  /* The ATTR attribute is not really of type `pthread_attr_t *'.  It has
-     the old size and access to the new members might crash the program.
-     We convert the struct now.  */
-  pthread_attr_t new_attr;
-
-  if (attr != NULL)
-    {
-      size_t ps = __getpagesize ();
-
-      memcpy (&new_attr, attr,
-	      (size_t) &(((pthread_attr_t*)NULL)->__guardsize));
-      new_attr.__guardsize = ps;
-      new_attr.__stackaddr_set = 0;
-      new_attr.__stackaddr = NULL;
-      new_attr.__stacksize = STACK_SIZE - ps;
-      attr = &new_attr;
-    }
-  return __pthread_create_2_1 (thread, attr, start_routine, arg);
-}
-compat_symbol (libpthread, __pthread_create_2_0, pthread_create, GLIBC_2_0);
-#endif
-
-/* Simple operations on thread identifiers */
-
-pthread_t pthread_self(void)
-{
-  pthread_descr self = thread_self();
-  return THREAD_GETMEM(self, p_tid);
-}
-
-int pthread_equal(pthread_t thread1, pthread_t thread2)
-{
-  return thread1 == thread2;
-}
-
-/* Helper function for thread_self in the case of user-provided stacks */
-
-#ifndef THREAD_SELF
-
-pthread_descr __pthread_find_self(void)
-{
-  char * sp = CURRENT_STACK_FRAME;
-  pthread_handle h;
-
-  /* __pthread_handles[0] is the initial thread, __pthread_handles[1] is
-     the manager threads handled specially in thread_self(), so start at 2 */
-  h = __pthread_handles + 2;
-  while (! (sp <= (char *) h->h_descr && sp >= h->h_bottom)) h++;
-  return h->h_descr;
-}
-
-#else
-
-static pthread_descr thread_self_stack(void)
-{
-  char *sp = CURRENT_STACK_FRAME;
-  pthread_handle h;
-
-  if (sp >= __pthread_manager_thread_bos && sp < __pthread_manager_thread_tos)
-    return &__pthread_manager_thread;
-  h = __pthread_handles + 2;
-  while (! (sp <= (char *) h->h_descr && sp >= h->h_bottom))
-    h++;
-  return h->h_descr;
-}
-
-#endif
-
-/* Thread scheduling */
-
-int pthread_setschedparam(pthread_t thread, int policy,
-                          const struct sched_param *param)
-{
-  pthread_handle handle = thread_handle(thread);
-  pthread_descr th;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (__builtin_expect (invalid_handle(handle, thread), 0)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-  th = handle->h_descr;
-  if (__builtin_expect (__sched_setscheduler(th->p_pid, policy, param) == -1,
-			0)) {
-    __pthread_unlock(&handle->h_lock);
-    return errno;
-  }
-  th->p_priority = policy == SCHED_OTHER ? 0 : param->sched_priority;
-  __pthread_unlock(&handle->h_lock);
-  if (__pthread_manager_request >= 0)
-    __pthread_manager_adjust_prio(th->p_priority);
-  return 0;
-}
-
-int pthread_getschedparam(pthread_t thread, int *policy,
-                          struct sched_param *param)
-{
-  pthread_handle handle = thread_handle(thread);
-  int pid, pol;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (__builtin_expect (invalid_handle(handle, thread), 0)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-  pid = handle->h_descr->p_pid;
-  __pthread_unlock(&handle->h_lock);
-  pol = __sched_getscheduler(pid);
-  if (__builtin_expect (pol, 0) == -1) return errno;
-  if (__sched_getparam(pid, param) == -1) return errno;
-  *policy = pol;
-  return 0;
-}
-
-int __pthread_yield (void)
-{
-  /* For now this is equivalent with the POSIX call.  */
-  return sched_yield ();
-}
-weak_alias (__pthread_yield, pthread_yield)
-
-/* Process-wide exit() request */
-
-static void pthread_onexit_process(int retcode, void *arg)
-{
-  if (__builtin_expect (__pthread_manager_request, 0) >= 0) {
-    struct pthread_request request;
-    pthread_descr self = thread_self();
-
-    request.req_thread = self;
-    request.req_kind = REQ_PROCESS_EXIT;
-    request.req_args.exit.code = retcode;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-    suspend(self);
-    /* Main thread should accumulate times for thread manager and its
-       children, so that timings for main thread account for all threads. */
-    if (self == __pthread_main_thread)
-      {
-	__waitpid(__pthread_manager_thread.p_pid, NULL, __WCLONE);
-	/* Since all threads have been asynchronously terminated
-           (possibly holding locks), free cannot be used any more.  */
-	/*free (__pthread_manager_thread_bos);*/
-	__pthread_manager_thread_bos = __pthread_manager_thread_tos = NULL;
-      }
-  }
-}
-
-#ifndef HAVE_Z_NODELETE
-static int __pthread_atexit_retcode;
-
-static void pthread_atexit_process(void *arg, int retcode)
-{
-  pthread_onexit_process (retcode ?: __pthread_atexit_retcode, arg);
-}
-
-static void pthread_atexit_retcode(void *arg, int retcode)
-{
-  __pthread_atexit_retcode = retcode;
-}
-#endif
-
-/* The handler for the RESTART signal just records the signal received
-   in the thread descriptor, and optionally performs a siglongjmp
-   (for pthread_cond_timedwait). */
-
-static void pthread_handle_sigrestart(int sig)
-{
-  pthread_descr self = thread_self();
-  THREAD_SETMEM(self, p_signal, sig);
-  if (THREAD_GETMEM(self, p_signal_jmp) != NULL)
-    siglongjmp(*THREAD_GETMEM(self, p_signal_jmp), 1);
-}
-
-/* The handler for the CANCEL signal checks for cancellation
-   (in asynchronous mode), for process-wide exit and exec requests.
-   For the thread manager thread, redirect the signal to
-   __pthread_manager_sighandler. */
-
-static void pthread_handle_sigcancel(int sig)
-{
-  pthread_descr self = thread_self();
-  sigjmp_buf * jmpbuf;
-
-  if (self == &__pthread_manager_thread)
-    {
-#ifdef THREAD_SELF
-      /* A new thread might get a cancel signal before it is fully
-	 initialized, so that the thread register might still point to the
-	 manager thread.  Double check that this is really the manager
-	 thread.  */
-      pthread_descr real_self = thread_self_stack();
-      if (real_self == &__pthread_manager_thread)
-	{
-	  __pthread_manager_sighandler(sig);
-	  return;
-	}
-      /* Oops, thread_self() isn't working yet..  */
-      self = real_self;
-# ifdef INIT_THREAD_SELF
-      INIT_THREAD_SELF(self, self->p_nr);
-# endif
-#else
-      __pthread_manager_sighandler(sig);
-      return;
-#endif
-    }
-  if (__builtin_expect (__pthread_exit_requested, 0)) {
-    /* Main thread should accumulate times for thread manager and its
-       children, so that timings for main thread account for all threads. */
-    if (self == __pthread_main_thread)
-      __waitpid(__pthread_manager_thread.p_pid, NULL, __WCLONE);
-    _exit(__pthread_exit_code);
-  }
-  if (__builtin_expect (THREAD_GETMEM(self, p_canceled), 0)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-    if (THREAD_GETMEM(self, p_canceltype) == PTHREAD_CANCEL_ASYNCHRONOUS)
-      __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-    jmpbuf = THREAD_GETMEM(self, p_cancel_jmp);
-    if (jmpbuf != NULL) {
-      THREAD_SETMEM(self, p_cancel_jmp, NULL);
-      siglongjmp(*jmpbuf, 1);
-    }
-  }
-}
-
-/* Handler for the DEBUG signal.
-   The debugging strategy is as follows:
-   On reception of a REQ_DEBUG request (sent by new threads created to
-   the thread manager under debugging mode), the thread manager throws
-   __pthread_sig_debug to itself. The debugger (if active) intercepts
-   this signal, takes into account new threads and continue execution
-   of the thread manager by propagating the signal because it doesn't
-   know what it is specifically done for. In the current implementation,
-   the thread manager simply discards it. */
-
-static void pthread_handle_sigdebug(int sig)
-{
-  /* Nothing */
-}
-
-/* Reset the state of the thread machinery after a fork().
-   Close the pipe used for requests and set the main thread to the forked
-   thread.
-   Notice that we can't free the stack segments, as the forked thread
-   may hold pointers into them. */
-
-void __pthread_reset_main_thread(void)
-{
-  pthread_descr self = thread_self();
-  struct rlimit limit;
-
-  if (__pthread_manager_request != -1) {
-    /* Free the thread manager stack */
-    free(__pthread_manager_thread_bos);
-    __pthread_manager_thread_bos = __pthread_manager_thread_tos = NULL;
-    /* Close the two ends of the pipe */
-    __libc_close(__pthread_manager_request);
-    __libc_close(__pthread_manager_reader);
-    __pthread_manager_request = __pthread_manager_reader = -1;
-  }
-
-  /* Update the pid of the main thread */
-  THREAD_SETMEM(self, p_pid, __getpid());
-  /* Make the forked thread the main thread */
-  __pthread_main_thread = self;
-  THREAD_SETMEM(self, p_nextlive, self);
-  THREAD_SETMEM(self, p_prevlive, self);
-  /* Now this thread modifies the global variables.  */
-  THREAD_SETMEM(self, p_resp, &_res);
-
-  if (getrlimit (RLIMIT_STACK, &limit) == 0
-      && limit.rlim_cur != limit.rlim_max) {
-    limit.rlim_cur = limit.rlim_max;
-    __libc_setrlimit(RLIMIT_STACK, &limit);
-  }
-}
-
-/* Process-wide exec() request */
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-
-void __pthread_kill_other_threads_np(void)
-{
-  struct sigaction sa;
-  /* Terminate all other threads and thread manager */
-  pthread_onexit_process(0, NULL);
-  /* Make current thread the main thread in case the calling thread
-     changes its mind, does not exec(), and creates new threads instead. */
-  __pthread_reset_main_thread();
-
-  /* Reset the signal handlers behaviour for the signals the
-     implementation uses since this would be passed to the new
-     process.  */
-  sigemptyset(&sa.sa_mask);
-  sa.sa_flags = 0;
-  sa.sa_handler = SIG_DFL;
-  __libc_sigaction(__pthread_sig_restart, &sa, NULL);
-  __libc_sigaction(__pthread_sig_cancel, &sa, NULL);
-  if (__pthread_sig_debug > 0)
-    __libc_sigaction(__pthread_sig_debug, &sa, NULL);
-}
-weak_alias (__pthread_kill_other_threads_np, pthread_kill_other_threads_np)
-
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 2 */
-
-/* Concurrency symbol level.  */
-static int current_level;
-
-int __pthread_setconcurrency(int level)
-{
-  /* We don't do anything unless we have found a useful interpretation.  */
-  current_level = level;
-  return 0;
-}
-weak_alias (__pthread_setconcurrency, pthread_setconcurrency)
-
-int __pthread_getconcurrency(void)
-{
-  return current_level;
-}
-weak_alias (__pthread_getconcurrency, pthread_getconcurrency)
-
-/* Primitives for controlling thread execution */
-
-void __pthread_wait_for_restart_signal(pthread_descr self)
-{
-  sigset_t mask;
-
-  sigprocmask(SIG_SETMASK, NULL, &mask); /* Get current signal mask */
-  sigdelset(&mask, __pthread_sig_restart); /* Unblock the restart signal */
-  THREAD_SETMEM(self, p_signal, 0);
-  do {
-    sigsuspend(&mask);                   /* Wait for signal */
-  } while (THREAD_GETMEM(self, p_signal) !=__pthread_sig_restart);
-
-  READ_MEMORY_BARRIER(); /* See comment in __pthread_restart_new */
-}
-
-#if !__ASSUME_REALTIME_SIGNALS
-/* The _old variants are for 2.0 and early 2.1 kernels which don't have RT
-   signals.
-   On these kernels, we use SIGUSR1 and SIGUSR2 for restart and cancellation.
-   Since the restart signal does not queue, we use an atomic counter to create
-   queuing semantics. This is needed to resolve a rare race condition in
-   pthread_cond_timedwait_relative. */
-
-void __pthread_restart_old(pthread_descr th)
-{
-  if (atomic_increment(&th->p_resume_count) == -1)
-    kill(th->p_pid, __pthread_sig_restart);
-}
-
-void __pthread_suspend_old(pthread_descr self)
-{
-  if (atomic_decrement(&self->p_resume_count) <= 0)
-    __pthread_wait_for_restart_signal(self);
-}
-
-int
-__pthread_timedsuspend_old(pthread_descr self, const struct timespec *abstime)
-{
-  sigset_t unblock, initial_mask;
-  int was_signalled = 0;
-  sigjmp_buf jmpbuf;
-
-  if (atomic_decrement(&self->p_resume_count) == 0) {
-    /* Set up a longjmp handler for the restart signal, unblock
-       the signal and sleep. */
-
-    if (sigsetjmp(jmpbuf, 1) == 0) {
-      THREAD_SETMEM(self, p_signal_jmp, &jmpbuf);
-      THREAD_SETMEM(self, p_signal, 0);
-      /* Unblock the restart signal */
-      sigemptyset(&unblock);
-      sigaddset(&unblock, __pthread_sig_restart);
-      sigprocmask(SIG_UNBLOCK, &unblock, &initial_mask);
-
-      while (1) {
-	struct timeval now;
-	struct timespec reltime;
-
-	/* Compute a time offset relative to now.  */
-	__gettimeofday (&now, NULL);
-	reltime.tv_nsec = abstime->tv_nsec - now.tv_usec * 1000;
-	reltime.tv_sec = abstime->tv_sec - now.tv_sec;
-	if (reltime.tv_nsec < 0) {
-	  reltime.tv_nsec += 1000000000;
-	  reltime.tv_sec -= 1;
-	}
-
-	/* Sleep for the required duration. If woken by a signal,
-	   resume waiting as required by Single Unix Specification.  */
-	if (reltime.tv_sec < 0 || __libc_nanosleep(&reltime, NULL) == 0)
-	  break;
-      }
-
-      /* Block the restart signal again */
-      sigprocmask(SIG_SETMASK, &initial_mask, NULL);
-      was_signalled = 0;
-    } else {
-      was_signalled = 1;
-    }
-    THREAD_SETMEM(self, p_signal_jmp, NULL);
-  }
-
-  /* Now was_signalled is true if we exited the above code
-     due to the delivery of a restart signal.  In that case,
-     we know we have been dequeued and resumed and that the
-     resume count is balanced.  Otherwise, there are some
-     cases to consider. First, try to bump up the resume count
-     back to zero. If it goes to 1, it means restart() was
-     invoked on this thread. The signal must be consumed
-     and the count bumped down and everything is cool. We
-     can return a 1 to the caller.
-     Otherwise, no restart was delivered yet, so a potential
-     race exists; we return a 0 to the caller which must deal
-     with this race in an appropriate way; for example by
-     atomically removing the thread from consideration for a
-     wakeup---if such a thing fails, it means a restart is
-     being delivered. */
-
-  if (!was_signalled) {
-    if (atomic_increment(&self->p_resume_count) != -1) {
-      __pthread_wait_for_restart_signal(self);
-      atomic_decrement(&self->p_resume_count); /* should be zero now! */
-      /* woke spontaneously and consumed restart signal */
-      return 1;
-    }
-    /* woke spontaneously but did not consume restart---caller must resolve */
-    return 0;
-  }
-  /* woken due to restart signal */
-  return 1;
-}
-#endif /* __ASSUME_REALTIME_SIGNALS */
-
-void __pthread_restart_new(pthread_descr th)
-{
-  /* The barrier is proabably not needed, in which case it still documents
-     our assumptions. The intent is to commit previous writes to shared
-     memory so the woken thread will have a consistent view.  Complementary
-     read barriers are present to the suspend functions. */
-  WRITE_MEMORY_BARRIER();
-  kill(th->p_pid, __pthread_sig_restart);
-}
-
-/* There is no __pthread_suspend_new because it would just
-   be a wasteful wrapper for __pthread_wait_for_restart_signal */
-
-int
-__pthread_timedsuspend_new(pthread_descr self, const struct timespec *abstime)
-{
-  sigset_t unblock, initial_mask;
-  int was_signalled = 0;
-  sigjmp_buf jmpbuf;
-
-  if (sigsetjmp(jmpbuf, 1) == 0) {
-    THREAD_SETMEM(self, p_signal_jmp, &jmpbuf);
-    THREAD_SETMEM(self, p_signal, 0);
-    /* Unblock the restart signal */
-    sigemptyset(&unblock);
-    sigaddset(&unblock, __pthread_sig_restart);
-    sigprocmask(SIG_UNBLOCK, &unblock, &initial_mask);
-
-    while (1) {
-      struct timeval now;
-      struct timespec reltime;
-
-      /* Compute a time offset relative to now.  */
-      __gettimeofday (&now, NULL);
-      reltime.tv_nsec = abstime->tv_nsec - now.tv_usec * 1000;
-      reltime.tv_sec = abstime->tv_sec - now.tv_sec;
-      if (reltime.tv_nsec < 0) {
-	reltime.tv_nsec += 1000000000;
-	reltime.tv_sec -= 1;
-      }
-
-      /* Sleep for the required duration. If woken by a signal,
-	 resume waiting as required by Single Unix Specification.  */
-      if (reltime.tv_sec < 0 || __libc_nanosleep(&reltime, NULL) == 0)
-	break;
-    }
-
-    /* Block the restart signal again */
-    sigprocmask(SIG_SETMASK, &initial_mask, NULL);
-    was_signalled = 0;
-  } else {
-    was_signalled = 1;
-  }
-  THREAD_SETMEM(self, p_signal_jmp, NULL);
-
-  /* Now was_signalled is true if we exited the above code
-     due to the delivery of a restart signal.  In that case,
-     everything is cool. We have been removed from whatever
-     we were waiting on by the other thread, and consumed its signal.
-
-     Otherwise we this thread woke up spontaneously, or due to a signal other
-     than restart. This is an ambiguous case  that must be resolved by
-     the caller; the thread is still eligible for a restart wakeup
-     so there is a race. */
-
-  READ_MEMORY_BARRIER(); /* See comment in __pthread_restart_new */
-  return was_signalled;
-}
-
-
-/* Debugging aid */
-
-#ifdef DEBUG
-#include <stdarg.h>
-
-void __pthread_message(char * fmt, ...)
-{
-  char buffer[1024];
-  va_list args;
-  sprintf(buffer, "%05d : ", __getpid());
-  va_start(args, fmt);
-  vsnprintf(buffer + 8, sizeof(buffer) - 8, fmt, args);
-  va_end(args);
-  TEMP_FAILURE_RETRY(__libc_write(2, buffer, strlen(buffer)));
-}
-
-#endif
-
-
-#ifndef SHARED
-/* We need a hook to force the cancelation wrappers and file locking
-   to be linked in when static libpthread is used.  */
-extern const int __pthread_provide_wrappers;
-static const int *const __pthread_require_wrappers =
-  &__pthread_provide_wrappers;
-extern const int __pthread_provide_lockfile;
-static const int *const __pthread_require_lockfile =
-  &__pthread_provide_lockfile;
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/ptlongjmp.c b/newlib/libc/sys/linux/linuxthreads/ptlongjmp.c
deleted file mode 100644
index c2ac55f63..000000000
--- a/newlib/libc/sys/linux/linuxthreads/ptlongjmp.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1998 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Redefine siglongjmp and longjmp so that they interact correctly
-   with cleanup handlers */
-
-#include <setjmp.h>
-#include "pthread.h"
-#include "internals.h"
-
-/* These functions are not declared anywhere since they shouldn't be
-   used at another place but here.  */
-extern void __libc_siglongjmp (sigjmp_buf env, int val)
-     __attribute__ ((noreturn));
-extern void __libc_longjmp (jmp_buf env, int val)
-     __attribute__ ((noreturn));
-
-
-static void pthread_cleanup_upto(jmp_buf target)
-{
-  pthread_descr self = thread_self();
-  struct _pthread_cleanup_buffer * c;
-  char *currentframe = CURRENT_STACK_FRAME;
-
-  for (c = THREAD_GETMEM(self, p_cleanup);
-       c != NULL && _JMPBUF_UNWINDS(target, c);
-       c = c->__prev)
-    {
-#if _STACK_GROWS_DOWN
-      if ((char *) c <= currentframe)
-	{
-	  c = NULL;
-	  break;
-	}
-#elif _STACK_GROWS_UP
-      if ((char *) c >= currentframe)
-	{
-	  c = NULL;
-	  break;
-	}
-#else
-# error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP"
-#endif
-      c->__routine(c->__arg);
-    }
-  THREAD_SETMEM(self, p_cleanup, c);
-  if (THREAD_GETMEM(self, p_in_sighandler)
-      && _JMPBUF_UNWINDS(target, THREAD_GETMEM(self, p_in_sighandler)))
-    THREAD_SETMEM(self, p_in_sighandler, NULL);
-}
-
-void siglongjmp(sigjmp_buf env, int val)
-{
-  pthread_cleanup_upto(env.__buf);
-  __libc_siglongjmp(env, val);
-}
-
-void longjmp(jmp_buf env, int val)
-{
-  pthread_cleanup_upto(env);
-  __libc_longjmp(env, val);
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/queue.h b/newlib/libc/sys/linux/linuxthreads/queue.h
deleted file mode 100644
index 28bd75531..000000000
--- a/newlib/libc/sys/linux/linuxthreads/queue.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Waiting queues */
-
-/* Waiting queues are represented by lists of thread descriptors
-   linked through their p_nextwaiting field.  The lists are kept
-   sorted by decreasing priority, and then decreasing waiting time. */
-
-static inline void enqueue(pthread_descr * q, pthread_descr th)
-{
-  int prio = th->p_priority;
-  ASSERT(th->p_nextwaiting == NULL);
-  for (; *q != NULL; q = &((*q)->p_nextwaiting)) {
-    if (prio > (*q)->p_priority) {
-      th->p_nextwaiting = *q;
-      *q = th;
-      return;
-    }
-  }
-  *q = th;
-}
-
-static inline pthread_descr dequeue(pthread_descr * q)
-{
-  pthread_descr th;
-  th = *q;
-  if (th != NULL) {
-    *q = th->p_nextwaiting;
-    th->p_nextwaiting = NULL;
-  }
-  return th;
-}
-
-static inline int remove_from_queue(pthread_descr * q, pthread_descr th)
-{
-  for (; *q != NULL; q = &((*q)->p_nextwaiting)) {
-    if (*q == th) {
-      *q = th->p_nextwaiting;
-      th->p_nextwaiting = NULL;
-      return 1;
-    }
-  }
-  return 0;
-}
-
-static inline int queue_is_empty(pthread_descr * q)
-{
-    return *q == NULL;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/reent.c b/newlib/libc/sys/linux/linuxthreads/reent.c
deleted file mode 100644
index 44d6f7858..000000000
--- a/newlib/libc/sys/linux/linuxthreads/reent.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Define the location of _REENT for the newlib C library */
-
-#include <reent.h>
-#include "pthread.h"
-#include "internals.h"
-
-struct _reent * __thread_reent()
-{
-  pthread_descr self = thread_self();
-  return THREAD_GETMEM (self, p_reentp);
-}
-
-/* Return thread specific resolver state.  */
-struct __res_state * __res_state()
-{
-  pthread_descr self = thread_self();
-  return THREAD_GETMEM (self, p_resp);
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/reqsyscalls.c b/newlib/libc/sys/linux/linuxthreads/reqsyscalls.c
deleted file mode 100644
index 714a8ba36..000000000
--- a/newlib/libc/sys/linux/linuxthreads/reqsyscalls.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* EL/IX level 1 and 2 libraries don't have the following syscalls,
-   but we need them due to our threading model based on processes */
-
-#include <time.h>
-#include <sched.h>
-#include <sys/wait.h>
-#include <machine/syscall.h>
-
-#define __NR___waitpid __NR_waitpid
-#define __NR___sched_getparam __NR_sched_getparam
-#define __NR___sched_getscheduler __NR_sched_getscheduler
-#define __NR___sched_setscheduler __NR_sched_setscheduler
-
-_syscall2(int,__sched_getparam,pid_t,pid,struct sched_param *,sched);
-_syscall1(int,__sched_getscheduler,pid_t,pid);
-_syscall3(int,__sched_setscheduler,pid_t,pid,int,policy,const struct sched_param *,sched);
-
-/* we want __libc____waitpid defined to support __waitpid which is
-   defined in wrapsyscall.c */
-_syscall3_base(pid_t,__waitpid,pid_t,pid,int *,wait_stat,int,options)
diff --git a/newlib/libc/sys/linux/linuxthreads/restart.h b/newlib/libc/sys/linux/linuxthreads/restart.h
deleted file mode 100644
index 24d9fab74..000000000
--- a/newlib/libc/sys/linux/linuxthreads/restart.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#include <signal.h>
-#include <kernel-features.h>
-
-/* Primitives for controlling thread execution */
-
-static inline void restart(pthread_descr th)
-{
-  /* See pthread.c */
-#if __ASSUME_REALTIME_SIGNALS
-  __pthread_restart_new(th);
-#else
-  __pthread_restart(th);
-#endif
-}
-
-static inline void suspend(pthread_descr self)
-{
-  /* See pthread.c */
-#if __ASSUME_REALTIME_SIGNALS
-  __pthread_wait_for_restart_signal(self);
-#else
-  __pthread_suspend(self);
-#endif
-}
-
-static inline int timedsuspend(pthread_descr self,
-		const struct timespec *abstime)
-{
-  /* See pthread.c */
-#if __ASSUME_REALTIME_SIGNALS
-  return __pthread_timedsuspend_new(self, abstime);
-#else
-  return __pthread_timedsuspend(self, abstime);
-#endif
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/rwlock.c b/newlib/libc/sys/linux/linuxthreads/rwlock.c
deleted file mode 100644
index e39597014..000000000
--- a/newlib/libc/sys/linux/linuxthreads/rwlock.c
+++ /dev/null
@@ -1,658 +0,0 @@
-/* Read-write lock implementation.
-   Copyright (C) 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Xavier Leroy <Xavier.Leroy@inria.fr>
-   and Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <bits/libc-lock.h>
-#include <errno.h>
-#include <pthread.h>
-#include <stdlib.h>
-#include "internals.h"
-#include "queue.h"
-#include "spinlock.h"
-#include "restart.h"
-
-/* Function called by pthread_cancel to remove the thread from
-   waiting inside pthread_rwlock_timedrdlock or pthread_rwlock_timedwrlock. */
-
-static int rwlock_rd_extricate_func(void *obj, pthread_descr th)
-{
-  pthread_rwlock_t *rwlock = obj;
-  int did_remove = 0;
-
-  __pthread_lock(&rwlock->__rw_lock, NULL);
-  did_remove = remove_from_queue(&rwlock->__rw_read_waiting, th);
-  __pthread_unlock(&rwlock->__rw_lock);
-
-  return did_remove;
-}
-
-static int rwlock_wr_extricate_func(void *obj, pthread_descr th)
-{
-  pthread_rwlock_t *rwlock = obj;
-  int did_remove = 0;
-
-  __pthread_lock(&rwlock->__rw_lock, NULL);
-  did_remove = remove_from_queue(&rwlock->__rw_write_waiting, th);
-  __pthread_unlock(&rwlock->__rw_lock);
-
-  return did_remove;
-}
-
-/*
- * Check whether the calling thread already owns one or more read locks on the
- * specified lock. If so, return a pointer to the read lock info structure
- * corresponding to that lock.
- */
-
-static pthread_readlock_info *
-rwlock_is_in_list(pthread_descr self, pthread_rwlock_t *rwlock)
-{
-  pthread_readlock_info *info;
-
-  for (info = THREAD_GETMEM (self, p_readlock_list); info != NULL;
-       info = info->pr_next)
-    {
-      if (info->pr_lock == rwlock)
-	return info;
-    }
-
-  return NULL;
-}
-
-/*
- * Add a new lock to the thread's list of locks for which it has a read lock.
- * A new info node must be allocated for this, which is taken from the thread's
- * free list, or by calling malloc. If malloc fails, a null pointer is
- * returned. Otherwise the lock info structure is initialized and pushed
- * onto the thread's list.
- */
-
-static pthread_readlock_info *
-rwlock_add_to_list(pthread_descr self, pthread_rwlock_t *rwlock)
-{
-  pthread_readlock_info *info = THREAD_GETMEM (self, p_readlock_free);
-
-  if (info != NULL)
-    THREAD_SETMEM (self, p_readlock_free, info->pr_next);
-  else
-    info = malloc(sizeof *info);
-
-  if (info == NULL)
-    return NULL;
-
-  info->pr_lock_count = 1;
-  info->pr_lock = rwlock;
-  info->pr_next = THREAD_GETMEM (self, p_readlock_list);
-  THREAD_SETMEM (self, p_readlock_list, info);
-
-  return info;
-}
-
-/*
- * If the thread owns a read lock over the given pthread_rwlock_t,
- * and this read lock is tracked in the thread's lock list,
- * this function returns a pointer to the info node in that list.
- * It also decrements the lock count within that node, and if
- * it reaches zero, it removes the node from the list.
- * If nothing is found, it returns a null pointer.
- */
-
-static pthread_readlock_info *
-rwlock_remove_from_list(pthread_descr self, pthread_rwlock_t *rwlock)
-{
-  pthread_readlock_info **pinfo;
-
-  for (pinfo = &self->p_readlock_list; *pinfo != NULL; pinfo = &(*pinfo)->pr_next)
-    {
-      if ((*pinfo)->pr_lock == rwlock)
-	{
-	  pthread_readlock_info *info = *pinfo;
-	  if (--info->pr_lock_count == 0)
-	    *pinfo = info->pr_next;
-	  return info;
-	}
-    }
-
-  return NULL;
-}
-
-/*
- * This function checks whether the conditions are right to place a read lock.
- * It returns 1 if so, otherwise zero. The rwlock's internal lock must be
- * locked upon entry.
- */
-
-static int
-rwlock_can_rdlock(pthread_rwlock_t *rwlock, int have_lock_already)
-{
-  /* Can't readlock; it is write locked. */
-  if (rwlock->__rw_writer != NULL)
-    return 0;
-
-  /* Lock prefers readers; get it. */
-  if (rwlock->__rw_kind == PTHREAD_RWLOCK_PREFER_READER_NP)
-    return 1;
-
-  /* Lock prefers writers, but none are waiting. */
-  if (queue_is_empty(&rwlock->__rw_write_waiting))
-    return 1;
-
-  /* Writers are waiting, but this thread already has a read lock */
-  if (have_lock_already)
-    return 1;
-
-  /* Writers are waiting, and this is a new lock */
-  return 0;
-}
-
-/*
- * This function helps support brain-damaged recursive read locking
- * semantics required by Unix 98, while maintaining write priority.
- * This basically determines whether this thread already holds a read lock
- * already. It returns 1 if so, otherwise it returns 0.
- *
- * If the thread has any ``untracked read locks'' then it just assumes
- * that this lock is among them, just to be safe, and returns 1.
- *
- * Also, if it finds the thread's lock in the list, it sets the pointer
- * referenced by pexisting to refer to the list entry.
- *
- * If the thread has no untracked locks, and the lock is not found
- * in its list, then it is added to the list. If this fails,
- * then *pout_of_mem is set to 1.
- */
-
-static int
-rwlock_have_already(pthread_descr *pself, pthread_rwlock_t *rwlock,
-    pthread_readlock_info **pexisting, int *pout_of_mem)
-{
-  pthread_readlock_info *existing = NULL;
-  int out_of_mem = 0, have_lock_already = 0;
-  pthread_descr self = *pself;
-
-  if (rwlock->__rw_kind == PTHREAD_RWLOCK_PREFER_WRITER_NP)
-    {
-      if (!self)
-	*pself = self = thread_self();
-
-      existing = rwlock_is_in_list(self, rwlock);
-
-      if (existing != NULL
-	  || THREAD_GETMEM (self, p_untracked_readlock_count) > 0)
-	have_lock_already = 1;
-      else
-	{
-	  existing = rwlock_add_to_list(self, rwlock);
-	  if (existing == NULL)
-	    out_of_mem = 1;
-	}
-    }
-
-  *pout_of_mem = out_of_mem;
-  *pexisting = existing;
-
-  return have_lock_already;
-}
-
-int
-__pthread_rwlock_init (pthread_rwlock_t *rwlock,
-		       const pthread_rwlockattr_t *attr)
-{
-  __pthread_init_lock(&rwlock->__rw_lock);
-  rwlock->__rw_readers = 0;
-  rwlock->__rw_writer = NULL;
-  rwlock->__rw_read_waiting = NULL;
-  rwlock->__rw_write_waiting = NULL;
-
-  if (attr == NULL)
-    {
-      rwlock->__rw_kind = PTHREAD_RWLOCK_DEFAULT_NP;
-      rwlock->__rw_pshared = PTHREAD_PROCESS_PRIVATE;
-    }
-  else
-    {
-      rwlock->__rw_kind = attr->__lockkind;
-      rwlock->__rw_pshared = attr->__pshared;
-    }
-
-  return 0;
-}
-strong_alias (__pthread_rwlock_init, pthread_rwlock_init)
-
-
-int
-__pthread_rwlock_destroy (pthread_rwlock_t *rwlock)
-{
-  int readers;
-  _pthread_descr writer;
-
-  __pthread_lock (&rwlock->__rw_lock, NULL);
-  readers = rwlock->__rw_readers;
-  writer = rwlock->__rw_writer;
-  __pthread_unlock (&rwlock->__rw_lock);
-
-  if (readers > 0 || writer != NULL)
-    return EBUSY;
-
-  return 0;
-}
-strong_alias (__pthread_rwlock_destroy, pthread_rwlock_destroy)
-
-int
-__pthread_rwlock_rdlock (pthread_rwlock_t *rwlock)
-{
-  pthread_descr self = NULL;
-  pthread_readlock_info *existing;
-  int out_of_mem, have_lock_already;
-
-  have_lock_already = rwlock_have_already(&self, rwlock,
-					  &existing, &out_of_mem);
-
-  if (self == NULL)
-    self = thread_self ();
-
-  for (;;)
-    {
-      __pthread_lock (&rwlock->__rw_lock, self);
-
-      if (rwlock_can_rdlock(rwlock, have_lock_already))
-	break;
-
-      enqueue (&rwlock->__rw_read_waiting, self);
-      __pthread_unlock (&rwlock->__rw_lock);
-      suspend (self); /* This is not a cancellation point */
-    }
-
-  ++rwlock->__rw_readers;
-  __pthread_unlock (&rwlock->__rw_lock);
-
-  if (have_lock_already || out_of_mem)
-    {
-      if (existing != NULL)
-	++existing->pr_lock_count;
-      else
-	++self->p_untracked_readlock_count;
-    }
-
-  return 0;
-}
-strong_alias (__pthread_rwlock_rdlock, pthread_rwlock_rdlock)
-
-int
-__pthread_rwlock_timedrdlock (pthread_rwlock_t *rwlock,
-			      const struct timespec *abstime)
-{
-  pthread_descr self = NULL;
-  pthread_readlock_info *existing;
-  int out_of_mem, have_lock_already;
-  pthread_extricate_if extr;
-
-  if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000)
-    return EINVAL;
-
-  have_lock_already = rwlock_have_already(&self, rwlock,
-					  &existing, &out_of_mem);
-
-  if (self == NULL)
-    self = thread_self ();
-
-  /* Set up extrication interface */
-  extr.pu_object = rwlock;
-  extr.pu_extricate_func = rwlock_rd_extricate_func;
-
-  /* Register extrication interface */
-  __pthread_set_own_extricate_if (self, &extr);
-
-  for (;;)
-    {
-      __pthread_lock (&rwlock->__rw_lock, self);
-
-      if (rwlock_can_rdlock(rwlock, have_lock_already))
-	break;
-
-      enqueue (&rwlock->__rw_read_waiting, self);
-      __pthread_unlock (&rwlock->__rw_lock);
-      /* This is not a cancellation point */
-      if (timedsuspend (self, abstime) == 0)
-	{
-	  int was_on_queue;
-
-	  __pthread_lock (&rwlock->__rw_lock, self);
-	  was_on_queue = remove_from_queue (&rwlock->__rw_read_waiting, self);
-	  __pthread_unlock (&rwlock->__rw_lock);
-
-	  if (was_on_queue)
-	    {
-	      __pthread_set_own_extricate_if (self, 0);
-	      return ETIMEDOUT;
-	    }
-
-	  /* Eat the outstanding restart() from the signaller */
-	  suspend (self);
-	}
-    }
-
-  __pthread_set_own_extricate_if (self, 0);
-
-  ++rwlock->__rw_readers;
-  __pthread_unlock (&rwlock->__rw_lock);
-
-  if (have_lock_already || out_of_mem)
-    {
-      if (existing != NULL)
-	++existing->pr_lock_count;
-      else
-	++self->p_untracked_readlock_count;
-    }
-
-  return 0;
-}
-strong_alias (__pthread_rwlock_timedrdlock, pthread_rwlock_timedrdlock)
-
-int
-__pthread_rwlock_tryrdlock (pthread_rwlock_t *rwlock)
-{
-  pthread_descr self = thread_self();
-  pthread_readlock_info *existing;
-  int out_of_mem, have_lock_already;
-  int retval = EBUSY;
-
-  have_lock_already = rwlock_have_already(&self, rwlock,
-      &existing, &out_of_mem);
-
-  __pthread_lock (&rwlock->__rw_lock, self);
-
-  /* 0 is passed to here instead of have_lock_already.
-     This is to meet Single Unix Spec requirements:
-     if writers are waiting, pthread_rwlock_tryrdlock
-     does not acquire a read lock, even if the caller has
-     one or more read locks already. */
-
-  if (rwlock_can_rdlock(rwlock, 0))
-    {
-      ++rwlock->__rw_readers;
-      retval = 0;
-    }
-
-  __pthread_unlock (&rwlock->__rw_lock);
-
-  if (retval == 0)
-    {
-      if (have_lock_already || out_of_mem)
-	{
-	  if (existing != NULL)
-	    ++existing->pr_lock_count;
-	  else
-	    ++self->p_untracked_readlock_count;
-	}
-    }
-
-  return retval;
-}
-strong_alias (__pthread_rwlock_tryrdlock, pthread_rwlock_tryrdlock)
-
-
-int
-__pthread_rwlock_wrlock (pthread_rwlock_t *rwlock)
-{
-  pthread_descr self = thread_self ();
-
-  while(1)
-    {
-      __pthread_lock (&rwlock->__rw_lock, self);
-      if (rwlock->__rw_readers == 0 && rwlock->__rw_writer == NULL)
-	{
-	  rwlock->__rw_writer = self;
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  return 0;
-	}
-
-      /* Suspend ourselves, then try again */
-      enqueue (&rwlock->__rw_write_waiting, self);
-      __pthread_unlock (&rwlock->__rw_lock);
-      suspend (self); /* This is not a cancellation point */
-    }
-}
-strong_alias (__pthread_rwlock_wrlock, pthread_rwlock_wrlock)
-
-
-int
-__pthread_rwlock_timedwrlock (pthread_rwlock_t *rwlock,
-			      const struct timespec *abstime)
-{
-  pthread_descr self;
-  pthread_extricate_if extr;
-
-  if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000)
-    return EINVAL;
-
-  self = thread_self ();
-
-  /* Set up extrication interface */
-  extr.pu_object = rwlock;
-  extr.pu_extricate_func =  rwlock_wr_extricate_func;
-
-  /* Register extrication interface */
-  __pthread_set_own_extricate_if (self, &extr);
-
-  while(1)
-    {
-      __pthread_lock (&rwlock->__rw_lock, self);
-
-      if (rwlock->__rw_readers == 0 && rwlock->__rw_writer == NULL)
-	{
-	  rwlock->__rw_writer = self;
-	  __pthread_set_own_extricate_if (self, 0);
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  return 0;
-	}
-
-      /* Suspend ourselves, then try again */
-      enqueue (&rwlock->__rw_write_waiting, self);
-      __pthread_unlock (&rwlock->__rw_lock);
-      /* This is not a cancellation point */
-      if (timedsuspend (self, abstime) == 0)
-	{
-	  int was_on_queue;
-
-	  __pthread_lock (&rwlock->__rw_lock, self);
-	  was_on_queue = remove_from_queue (&rwlock->__rw_write_waiting, self);
-	  __pthread_unlock (&rwlock->__rw_lock);
-
-	  if (was_on_queue)
-	    {
-	      __pthread_set_own_extricate_if (self, 0);
-	      return ETIMEDOUT;
-	    }
-
-	  /* Eat the outstanding restart() from the signaller */
-	  suspend (self);
-	}
-    }
-}
-strong_alias (__pthread_rwlock_timedwrlock, pthread_rwlock_timedwrlock)
-
-
-int
-__pthread_rwlock_trywrlock (pthread_rwlock_t *rwlock)
-{
-  int result = EBUSY;
-
-  __pthread_lock (&rwlock->__rw_lock, NULL);
-  if (rwlock->__rw_readers == 0 && rwlock->__rw_writer == NULL)
-    {
-      rwlock->__rw_writer = thread_self ();
-      result = 0;
-    }
-  __pthread_unlock (&rwlock->__rw_lock);
-
-  return result;
-}
-strong_alias (__pthread_rwlock_trywrlock, pthread_rwlock_trywrlock)
-
-
-int
-__pthread_rwlock_unlock (pthread_rwlock_t *rwlock)
-{
-  pthread_descr torestart;
-  pthread_descr th;
-
-  __pthread_lock (&rwlock->__rw_lock, NULL);
-  if (rwlock->__rw_writer != NULL)
-    {
-      /* Unlocking a write lock.  */
-      if (rwlock->__rw_writer != thread_self ())
-	{
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  return EPERM;
-	}
-      rwlock->__rw_writer = NULL;
-
-      if ((rwlock->__rw_kind == PTHREAD_RWLOCK_PREFER_READER_NP
-	   && !queue_is_empty(&rwlock->__rw_read_waiting))
-	  || (th = dequeue(&rwlock->__rw_write_waiting)) == NULL)
-	{
-	  /* Restart all waiting readers.  */
-	  torestart = rwlock->__rw_read_waiting;
-	  rwlock->__rw_read_waiting = NULL;
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  while ((th = dequeue (&torestart)) != NULL)
-	    restart (th);
-	}
-      else
-	{
-	  /* Restart one waiting writer.  */
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  restart (th);
-	}
-    }
-  else
-    {
-      /* Unlocking a read lock.  */
-      if (rwlock->__rw_readers == 0)
-	{
-	  __pthread_unlock (&rwlock->__rw_lock);
-	  return EPERM;
-	}
-
-      --rwlock->__rw_readers;
-      if (rwlock->__rw_readers == 0)
-	/* Restart one waiting writer, if any.  */
-	th = dequeue (&rwlock->__rw_write_waiting);
-      else
-	th = NULL;
-
-      __pthread_unlock (&rwlock->__rw_lock);
-      if (th != NULL)
-	restart (th);
-
-      /* Recursive lock fixup */
-
-      if (rwlock->__rw_kind == PTHREAD_RWLOCK_PREFER_WRITER_NP)
-	{
-	  pthread_descr self = thread_self();
-	  pthread_readlock_info *victim = rwlock_remove_from_list(self, rwlock);
-
-	  if (victim != NULL)
-	    {
-	      if (victim->pr_lock_count == 0)
-		{
-		  victim->pr_next = THREAD_GETMEM (self, p_readlock_free);
-		  THREAD_SETMEM (self, p_readlock_free, victim);
-		}
-	    }
-	  else
-	    {
-	      int val = THREAD_GETMEM (self, p_untracked_readlock_count);
-	      if (val > 0)
-		THREAD_SETMEM (self, p_untracked_readlock_count, val - 1);
-	    }
-	}
-    }
-
-  return 0;
-}
-strong_alias (__pthread_rwlock_unlock, pthread_rwlock_unlock)
-
-
-
-int
-pthread_rwlockattr_init (pthread_rwlockattr_t *attr)
-{
-  attr->__lockkind = 0;
-  attr->__pshared = PTHREAD_PROCESS_PRIVATE;
-
-  return 0;
-}
-
-
-int
-__pthread_rwlockattr_destroy (pthread_rwlockattr_t *attr)
-{
-  return 0;
-}
-strong_alias (__pthread_rwlockattr_destroy, pthread_rwlockattr_destroy)
-
-
-int
-pthread_rwlockattr_getpshared (const pthread_rwlockattr_t *attr, int *pshared)
-{
-  *pshared = attr->__pshared;
-  return 0;
-}
-
-
-int
-pthread_rwlockattr_setpshared (pthread_rwlockattr_t *attr, int pshared)
-{
-  if (pshared != PTHREAD_PROCESS_PRIVATE && pshared != PTHREAD_PROCESS_SHARED)
-    return EINVAL;
-
-  /* For now it is not possible to shared a conditional variable.  */
-  if (pshared != PTHREAD_PROCESS_PRIVATE)
-    return ENOSYS;
-
-  attr->__pshared = pshared;
-
-  return 0;
-}
-
-
-int
-pthread_rwlockattr_getkind_np (const pthread_rwlockattr_t *attr, int *pref)
-{
-  *pref = attr->__lockkind;
-  return 0;
-}
-
-
-int
-pthread_rwlockattr_setkind_np (pthread_rwlockattr_t *attr, int pref)
-{
-  if (pref != PTHREAD_RWLOCK_PREFER_READER_NP
-      && pref != PTHREAD_RWLOCK_PREFER_WRITER_NP
-      && pref != PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP
-      && pref != PTHREAD_RWLOCK_DEFAULT_NP)
-    return EINVAL;
-
-  attr->__lockkind = pref;
-
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/semaphore.c b/newlib/libc/sys/linux/linuxthreads/semaphore.c
deleted file mode 100644
index e0dac4120..000000000
--- a/newlib/libc/sys/linux/linuxthreads/semaphore.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Semaphores a la POSIX 1003.1b */
-
-#include <errno.h>
-#include "pthread.h"
-#include "semaphore.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-#include "queue.h"
-#include <shlib-compat.h>
-
-int __new_sem_init(sem_t *sem, int pshared, unsigned int value)
-{
-  if (value > SEM_VALUE_MAX) {
-    errno = EINVAL;
-    return -1;
-  }
-  if (pshared) {
-    errno = ENOSYS;
-    return -1;
-  }
-  __pthread_init_lock(&sem->__sem_lock);
-  sem->__sem_value = value;
-  sem->__sem_waiting = NULL;
-  return 0;
-}
-
-/* Function called by pthread_cancel to remove the thread from
-   waiting inside __new_sem_wait. */
-
-static int new_sem_extricate_func(void *obj, pthread_descr th)
-{
-  volatile pthread_descr self = thread_self();
-  sem_t *sem = obj;
-  int did_remove = 0;
-
-  __pthread_lock(&sem->__sem_lock, self);
-  did_remove = remove_from_queue(&sem->__sem_waiting, th);
-  __pthread_unlock(&sem->__sem_lock);
-
-  return did_remove;
-}
-
-int __new_sem_wait(sem_t * sem)
-{
-  volatile pthread_descr self = thread_self();
-  pthread_extricate_if extr;
-  int already_canceled = 0;
-  int spurious_wakeup_count;
-
-  /* Set up extrication interface */
-  extr.pu_object = sem;
-  extr.pu_extricate_func = new_sem_extricate_func;
-
-  __pthread_lock(&sem->__sem_lock, self);
-  if (sem->__sem_value > 0) {
-    sem->__sem_value--;
-    __pthread_unlock(&sem->__sem_lock);
-    return 0;
-  }
-  /* Register extrication interface */
-  THREAD_SETMEM(self, p_sem_avail, 0);
-  __pthread_set_own_extricate_if(self, &extr);
-  /* Enqueue only if not already cancelled. */
-  if (!(THREAD_GETMEM(self, p_canceled)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE))
-    enqueue(&sem->__sem_waiting, self);
-  else
-    already_canceled = 1;
-  __pthread_unlock(&sem->__sem_lock);
-
-  if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  /* Wait for sem_post or cancellation, or fall through if already canceled */
-  spurious_wakeup_count = 0;
-  while (1)
-    {
-      suspend(self);
-      if (THREAD_GETMEM(self, p_sem_avail) == 0
-	  && (THREAD_GETMEM(self, p_woken_by_cancel) == 0
-	      || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE))
-	{
-	  /* Count resumes that don't belong to us. */
-	  spurious_wakeup_count++;
-	  continue;
-	}
-      break;
-    }
-  __pthread_set_own_extricate_if(self, 0);
-
-  /* Terminate only if the wakeup came from cancellation. */
-  /* Otherwise ignore cancellation because we got the semaphore. */
-
-  if (THREAD_GETMEM(self, p_woken_by_cancel)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-    THREAD_SETMEM(self, p_woken_by_cancel, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-  /* We got the semaphore */
-  return 0;
-}
-
-int __new_sem_trywait(sem_t * sem)
-{
-  int retval;
-
-  __pthread_lock(&sem->__sem_lock, NULL);
-  if (sem->__sem_value == 0) {
-    errno = EAGAIN;
-    retval = -1;
-  } else {
-    sem->__sem_value--;
-    retval = 0;
-  }
-  __pthread_unlock(&sem->__sem_lock);
-  return retval;
-}
-
-int __new_sem_post(sem_t * sem)
-{
-  pthread_descr self = thread_self();
-  pthread_descr th;
-  struct pthread_request request;
-
-  if (THREAD_GETMEM(self, p_in_sighandler) == NULL) {
-    __pthread_lock(&sem->__sem_lock, self);
-    if (sem->__sem_waiting == NULL) {
-      if (sem->__sem_value >= SEM_VALUE_MAX) {
-        /* Overflow */
-        errno = ERANGE;
-        __pthread_unlock(&sem->__sem_lock);
-        return -1;
-      }
-      sem->__sem_value++;
-      __pthread_unlock(&sem->__sem_lock);
-    } else {
-      th = dequeue(&sem->__sem_waiting);
-      __pthread_unlock(&sem->__sem_lock);
-      th->p_sem_avail = 1;
-      WRITE_MEMORY_BARRIER();
-      restart(th);
-    }
-  } else {
-    /* If we're in signal handler, delegate post operation to
-       the thread manager. */
-    if (__pthread_manager_request < 0) {
-      if (__pthread_initialize_manager() < 0) {
-        errno = EAGAIN;
-        return -1;
-      }
-    }
-    request.req_kind = REQ_POST;
-    request.req_args.post = sem;
-    TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				    (char *) &request, sizeof(request)));
-  }
-  return 0;
-}
-
-int __new_sem_getvalue(sem_t * sem, int * sval)
-{
-  *sval = sem->__sem_value;
-  return 0;
-}
-
-int __new_sem_destroy(sem_t * sem)
-{
-  if (sem->__sem_waiting != NULL) {
-    __set_errno (EBUSY);
-    return -1;
-  }
-  return 0;
-}
-
-sem_t *sem_open(const char *name, int oflag, ...)
-{
-  __set_errno (ENOSYS);
-  return SEM_FAILED;
-}
-
-int sem_close(sem_t *sem)
-{
-  __set_errno (ENOSYS);
-  return -1;
-}
-
-int sem_unlink(const char *name)
-{
-  __set_errno (ENOSYS);
-  return -1;
-}
-
-int sem_timedwait(sem_t *sem, const struct timespec *abstime)
-{
-  pthread_descr self = thread_self();
-  pthread_extricate_if extr;
-  int already_canceled = 0;
-  int spurious_wakeup_count;
-
-  __pthread_lock(&sem->__sem_lock, self);
-  if (sem->__sem_value > 0) {
-    --sem->__sem_value;
-    __pthread_unlock(&sem->__sem_lock);
-    return 0;
-  }
-
-  if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000) {
-    /* The standard requires that if the function would block and the
-       time value is illegal, the function returns with an error.  */
-    __pthread_unlock(&sem->__sem_lock);
-    return EINVAL;
-  }
-
-  /* Set up extrication interface */
-  extr.pu_object = sem;
-  extr.pu_extricate_func = new_sem_extricate_func;
-
-  /* Register extrication interface */
-  THREAD_SETMEM(self, p_sem_avail, 0);
-  __pthread_set_own_extricate_if(self, &extr);
-  /* Enqueue only if not already cancelled. */
-  if (!(THREAD_GETMEM(self, p_canceled)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE))
-    enqueue(&sem->__sem_waiting, self);
-  else
-    already_canceled = 1;
-  __pthread_unlock(&sem->__sem_lock);
-
-  if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-
-  spurious_wakeup_count = 0;
-  while (1)
-    {
-      if (timedsuspend(self, abstime) == 0) {
-	int was_on_queue;
-
-	/* __pthread_lock will queue back any spurious restarts that
-	   may happen to it. */
-
-	__pthread_lock(&sem->__sem_lock, self);
-	was_on_queue = remove_from_queue(&sem->__sem_waiting, self);
-	__pthread_unlock(&sem->__sem_lock);
-
-	if (was_on_queue) {
-	  __pthread_set_own_extricate_if(self, 0);
-	  return ETIMEDOUT;
-	}
-
-	/* Eat the outstanding restart() from the signaller */
-	suspend(self);
-      }
-
-      if (THREAD_GETMEM(self, p_sem_avail) == 0
-	  && (THREAD_GETMEM(self, p_woken_by_cancel) == 0
-	      || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE))
-	{
-	  /* Count resumes that don't belong to us. */
-	  spurious_wakeup_count++;
-	  continue;
-	}
-      break;
-    }
-
- __pthread_set_own_extricate_if(self, 0);
-
-  /* Terminate only if the wakeup came from cancellation. */
-  /* Otherwise ignore cancellation because we got the semaphore. */
-
-  if (THREAD_GETMEM(self, p_woken_by_cancel)
-      && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
-    THREAD_SETMEM(self, p_woken_by_cancel, 0);
-    __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME);
-  }
-  /* We got the semaphore */
-  return 0;
-}
-
-
-versioned_symbol (libpthread, __new_sem_init, sem_init, GLIBC_2_1);
-versioned_symbol (libpthread, __new_sem_wait, sem_wait, GLIBC_2_1);
-versioned_symbol (libpthread, __new_sem_trywait, sem_trywait, GLIBC_2_1);
-versioned_symbol (libpthread, __new_sem_post, sem_post, GLIBC_2_1);
-versioned_symbol (libpthread, __new_sem_getvalue, sem_getvalue, GLIBC_2_1);
-versioned_symbol (libpthread, __new_sem_destroy, sem_destroy, GLIBC_2_1);
diff --git a/newlib/libc/sys/linux/linuxthreads/semaphore.h b/newlib/libc/sys/linux/linuxthreads/semaphore.h
deleted file mode 100644
index 5971f0d51..000000000
--- a/newlib/libc/sys/linux/linuxthreads/semaphore.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#ifndef _SEMAPHORE_H
-#define _SEMAPHORE_H    1
-
-#include <features.h>
-#include <sys/types.h>
-#include <bits/pthreadtypes.h>
-#ifdef __USE_XOPEN2K
-# define __need_timespec
-# include <time.h>
-#endif
-
-#ifndef _PTHREAD_DESCR_DEFINED
-/* Thread descriptors.  Needed for `sem_t' definition.  */
-typedef struct _pthread_descr_struct *_pthread_descr;
-# define _PTHREAD_DESCR_DEFINED
-#endif
-
-/* System specific semaphore definition.  */
-typedef struct
-{
-  struct _pthread_fastlock __sem_lock;
-  int __sem_value;
-  _pthread_descr __sem_waiting;
-} sem_t;
-
-
-
-/* Value returned if `sem_open' failed.  */
-#define SEM_FAILED	((sem_t *) 0)
-
-/* Maximum value the semaphore can have.  */
-#define SEM_VALUE_MAX 	((int) ((~0u) >> 1))
-
-
-__BEGIN_DECLS
-
-/* Initialize semaphore object SEM to VALUE.  If PSHARED then share it
-   with other processes.  */
-extern int sem_init (sem_t *__sem, int __pshared, unsigned int __value) __THROW;
-
-/* Free resources associated with semaphore object SEM.  */
-extern int sem_destroy (sem_t *__sem) __THROW;
-
-/* Open a named semaphore NAME with open flaot OFLAG.  */
-extern sem_t *sem_open (__const char *__name, int __oflag, ...) __THROW;
-
-/* Close descriptor for named semaphore SEM.  */
-extern int sem_close (sem_t *__sem) __THROW;
-
-/* Remove named semaphore NAME.  */
-extern int sem_unlink (__const char *__name) __THROW;
-
-/* Wait for SEM being posted.  */
-extern int sem_wait (sem_t *__sem) __THROW;
-
-#ifdef __USE_XOPEN2K
-/* Similar to `sem_wait' but wait only until ABSTIME.  */
-extern int sem_timedwait (sem_t *__restrict __sem,
-			  __const struct timespec *__restrict __abstime)
-     __THROW;
-#endif
-
-/* Test whether SEM is posted.  */
-extern int sem_trywait (sem_t *__sem) __THROW;
-
-/* Post SEM.  */
-extern int sem_post (sem_t *__sem) __THROW;
-
-/* Get current value of SEM and store it in *SVAL.  */
-extern int sem_getvalue (sem_t *__restrict __sem, int *__restrict __sval)
-     __THROW;
-
-__END_DECLS
-
-#endif  /* semaphore.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/shlib-compat.h b/newlib/libc/sys/linux/linuxthreads/shlib-compat.h
deleted file mode 100644
index 245b8aa89..000000000
--- a/newlib/libc/sys/linux/linuxthreads/shlib-compat.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Macros for managing ABI-compatibility definitions using ELF symbol versions.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _SHLIB_COMPAT_H
-#define _SHLIB_COMPAT_H	1
-
-#if defined HAVE_ELF && defined DO_VERSIONING
-/* Since there is just one set of .d files generated, we need to
-   include this unconditionally to have the dependency noticed properly.  */
-#include <abi-versions.h>	/* header generated by abi-versions.awk */
-#endif
-
-#if defined HAVE_ELF && defined SHARED && defined DO_VERSIONING
-
-/* The file abi-versions.h (generated by scripts/abi-versions.awk) defines
-   symbols like `ABI_libm_GLIBC_2_0' for each version set in the source
-   code for each library.  For a version set that is subsumed by a later
-   version set, the definition gives the subsuming set, i.e. if GLIBC_2_0
-   is subsumed by GLIBC_2_1, then ABI_libm_GLIBC_2_0 == ABI_libm_GLIBC_2_1.
-   Each version set that is to be distinctly defined in the output has an
-   unique positive integer value, increasing with newer versions.  Thus,
-   evaluating two ABI_* symbols reduces to integer values that differ only
-   when the two version sets named are in fact two different ABIs we are
-   supporting.  If these do not differ, then there is no need to compile in
-   extra code to support this version set where it has been superseded by a
-   newer version.  The compatibility code should be conditionalized with
-   e.g. `#if SHLIB_COMPAT (libm, GLIBC_2_0, GLIBC_2_2)' for code introduced
-   in the GLIBC_2.0 version and obsoleted in the GLIBC_2.2 version.  */
-
-# define SHLIB_COMPAT(lib, introduced, obsoleted) \
-  (!(ABI_##lib##_##obsoleted - 0) \
-   || ((ABI_##lib##_##introduced - 0) < (ABI_##lib##_##obsoleted - 0)))
-
-/* That header also defines symbols like `VERSION_libm_GLIBC_2_1' to
-   the version set name to use for e.g. symbols first introduced into
-   libm in the GLIBC_2.1 version.  Definitions of symbols with explicit
-   versions should look like:
-   	versioned_symbol (libm, new_foo, foo, GLIBC_2_1);
-   This will define the symbol `foo' with the appropriate default version,
-   i.e. either GLIBC_2.1 or the "earliest version" specified in
-   shlib-versions if that is newer.  */
-
-# define versioned_symbol(lib, local, symbol, version) \
-  versioned_symbol_1 (local, symbol, VERSION_##lib##_##version)
-# define versioned_symbol_1(local, symbol, name) \
-  default_symbol_version (local, symbol, name)
-
-# define compat_symbol(lib, local, symbol, version) \
-  compat_symbol_1 (local, symbol, VERSION_##lib##_##version)
-# define compat_symbol_1(local, symbol, name) \
-  symbol_version (local, symbol, name)
-
-#else
-
-/* Not compiling ELF shared libraries at all, so never any old versions.  */
-# define SHLIB_COMPAT(lib, introduced, obsoleted)	0
-
-/* No versions to worry about, just make this the global definition.  */
-# define versioned_symbol(lib, local, symbol, version) \
-  weak_alias (local, symbol)
-
-/* This should not appear outside `#if SHLIB_COMPAT (...)'.  */
-# define compat_symbol(lib, local, symbol, version) ...
-
-#endif
-
-
-#endif	/* shlib-compat.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/signals.c b/newlib/libc/sys/linux/linuxthreads/signals.c
deleted file mode 100644
index da3ce69a4..000000000
--- a/newlib/libc/sys/linux/linuxthreads/signals.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Handling of signals */
-
-#include <errno.h>
-#include <signal.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include <ucontext.h>
-#include <sigcontextinfo.h>
-
-int pthread_sigmask(int how, const sigset_t * newmask, sigset_t * oldmask)
-{
-  sigset_t mask;
-
-  if (newmask != NULL) {
-    mask = *newmask;
-    /* Don't allow __pthread_sig_restart to be unmasked.
-       Don't allow __pthread_sig_cancel to be masked. */
-    switch(how) {
-    case SIG_SETMASK:
-      sigaddset(&mask, __pthread_sig_restart);
-      sigdelset(&mask, __pthread_sig_cancel);
-      break;
-    case SIG_BLOCK:
-      sigdelset(&mask, __pthread_sig_cancel);
-      break;
-    case SIG_UNBLOCK:
-      sigdelset(&mask, __pthread_sig_restart);
-      break;
-    }
-    newmask = &mask;
-  }
-  if (sigprocmask(how, newmask, oldmask) == -1)
-    return errno;
-  else
-    return 0;
-}
-
-int pthread_kill(pthread_t thread, int signo)
-{
-  pthread_handle handle = thread_handle(thread);
-  int pid;
-
-  __pthread_lock(&handle->h_lock, NULL);
-  if (invalid_handle(handle, thread)) {
-    __pthread_unlock(&handle->h_lock);
-    return ESRCH;
-  }
-  pid = handle->h_descr->p_pid;
-  __pthread_unlock(&handle->h_lock);
-  if (kill(pid, signo) == -1)
-    return errno;
-  else
-    return 0;
-}
-
-/* User-provided signal handlers */
-typedef void (*arch_sighandler_t) (int, SIGCONTEXT);
-static union
-{
-  arch_sighandler_t old;
-  void (*rt) (int, struct siginfo *, struct ucontext *);
-} sighandler[NSIG] = { [1 ... NSIG - 1] = { (arch_sighandler_t) SIG_ERR } };
-
-/* The wrapper around user-provided signal handlers */
-static void pthread_sighandler(int signo, SIGCONTEXT ctx)
-{
-  pthread_descr self;
-  char * in_sighandler;
-  self = thread_self();
-  /* If we're in a sigwait operation, just record the signal received
-     and return without calling the user's handler */
-  if (THREAD_GETMEM(self, p_sigwaiting)) {
-    THREAD_SETMEM(self, p_sigwaiting, 0);
-    THREAD_SETMEM(self, p_signal, signo);
-    return;
-  }
-  /* Record that we're in a signal handler and call the user's
-     handler function */
-  in_sighandler = THREAD_GETMEM(self, p_in_sighandler);
-  if (in_sighandler == NULL)
-    THREAD_SETMEM(self, p_in_sighandler, CURRENT_STACK_FRAME);
-  CALL_SIGHANDLER(sighandler[signo].old, signo, ctx);
-  if (in_sighandler == NULL)
-    THREAD_SETMEM(self, p_in_sighandler, NULL);
-}
-
-/* The same, this time for real-time signals.  */
-static void pthread_sighandler_rt(int signo, struct siginfo *si,
-				  struct ucontext *uc)
-{
-  pthread_descr self;
-  char * in_sighandler;
-  self =  thread_self();
-  /* If we're in a sigwait operation, just record the signal received
-     and return without calling the user's handler */
-  if (THREAD_GETMEM(self, p_sigwaiting)) {
-    THREAD_SETMEM(self, p_sigwaiting, 0);
-    THREAD_SETMEM(self, p_signal, signo);
-    return;
-  }
-  /* Record that we're in a signal handler and call the user's
-     handler function */
-  in_sighandler = THREAD_GETMEM(self, p_in_sighandler);
-  if (in_sighandler == NULL)
-    THREAD_SETMEM(self, p_in_sighandler, CURRENT_STACK_FRAME);
-  sighandler[signo].rt(signo, si, uc);
-  if (in_sighandler == NULL)
-    THREAD_SETMEM(self, p_in_sighandler, NULL);
-}
-
-/* The wrapper around sigaction.  Install our own signal handler
-   around the signal. */
-int __sigaction(int sig, const struct sigaction * act,
-              struct sigaction * oact)
-{
-  struct sigaction newact;
-  struct sigaction *newactp;
-
-  if (sig == __pthread_sig_restart ||
-      sig == __pthread_sig_cancel ||
-      (sig == __pthread_sig_debug && __pthread_sig_debug > 0))
-    {
-      __set_errno (EINVAL);
-      return -1;
-    }
-  if (act)
-    {
-      newact = *act;
-      if (act->sa_handler != SIG_IGN && act->sa_handler != SIG_DFL
-	  && sig > 0 && sig < NSIG)
-	{
-	  if (act->sa_flags & SA_SIGINFO)
-	    newact.sa_handler = (__sighandler_t) pthread_sighandler_rt;
-	  else
-	    newact.sa_handler = (__sighandler_t) pthread_sighandler;
-	}
-      newactp = &newact;
-    }
-  else
-    newactp = NULL;
-  if (__libc_sigaction(sig, newactp, oact) == -1)
-    return -1;
-  if (sig > 0 && sig < NSIG)
-    {
-      if (oact != NULL
-	  /* We may have inherited SIG_IGN from the parent, so return the
-	     kernel's idea of the signal handler the first time
-	     through.  */
-	  && (__sighandler_t) sighandler[sig].old != SIG_ERR)
-	oact->sa_handler = (__sighandler_t) sighandler[sig].old;
-      if (act)
-	/* For the assignment it does not matter whether it's a normal
-	   or real-time signal.  */
-	sighandler[sig].old = (arch_sighandler_t) act->sa_handler;
-    }
-  return 0;
-}
-strong_alias(__sigaction, sigaction)
-
-/* A signal handler that does nothing */
-static void pthread_null_sighandler(int sig) { }
-
-/* sigwait -- synchronously wait for a signal */
-int sigwait(const sigset_t * set, int * sig)
-{
-  volatile pthread_descr self = thread_self();
-  sigset_t mask;
-  int s;
-  sigjmp_buf jmpbuf;
-  struct sigaction sa;
-
-  /* Get ready to block all signals except those in set
-     and the cancellation signal.
-     Also check that handlers are installed on all signals in set,
-     and if not, install our dummy handler.  This is conformant to
-     POSIX: "The effect of sigwait() on the signal actions for the
-     signals in set is unspecified." */
-  sigfillset(&mask);
-  sigdelset(&mask, __pthread_sig_cancel);
-  for (s = 1; s < NSIG; s++) {
-    if (sigismember(set, s) &&
-        s != __pthread_sig_restart &&
-        s != __pthread_sig_cancel &&
-        s != __pthread_sig_debug) {
-      sigdelset(&mask, s);
-      if (sighandler[s].old == (arch_sighandler_t) SIG_ERR ||
-          sighandler[s].old == (arch_sighandler_t) SIG_DFL ||
-          sighandler[s].old == (arch_sighandler_t) SIG_IGN) {
-        sa.sa_handler = pthread_null_sighandler;
-        sigfillset(&sa.sa_mask);
-        sa.sa_flags = 0;
-        sigaction(s, &sa, NULL);
-      }
-    }
-  }
-  /* Test for cancellation */
-  if (sigsetjmp(jmpbuf, 1) == 0) {
-    THREAD_SETMEM(self, p_cancel_jmp, &jmpbuf);
-    if (! (THREAD_GETMEM(self, p_canceled)
-	   && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE)) {
-      /* Reset the signal count */
-      THREAD_SETMEM(self, p_signal, 0);
-      /* Say we're in sigwait */
-      THREAD_SETMEM(self, p_sigwaiting, 1);
-      /* Unblock the signals and wait for them */
-      sigsuspend(&mask);
-    }
-  }
-  THREAD_SETMEM(self, p_cancel_jmp, NULL);
-  /* The signals are now reblocked.  Check for cancellation */
-  pthread_testcancel();
-  /* We should have self->p_signal != 0 and equal to the signal received */
-  *sig = THREAD_GETMEM(self, p_signal);
-  return 0;
-}
-
-/* Redefine raise() to send signal to calling thread only,
-   as per POSIX 1003.1c */
-int raise (int sig)
-{
-  int retcode = pthread_kill(pthread_self(), sig);
-  if (retcode == 0)
-    return 0;
-  else {
-    errno = retcode;
-    return -1;
-  }
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/specific.c b/newlib/libc/sys/linux/linuxthreads/specific.c
deleted file mode 100644
index 2dbf2055e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/specific.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1996 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Thread-specific data */
-
-#include <errno.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-#include <bits/libc-lock.h>
-
-
-/* Table of keys. */
-
-static struct pthread_key_struct pthread_keys[PTHREAD_KEYS_MAX] =
-  { { 0, NULL } };
-
-/* For debugging purposes put the maximum number of keys in a variable.  */
-const int __linuxthreads_pthread_keys_max = PTHREAD_KEYS_MAX;
-const int __linuxthreads_pthread_key_2ndlevel_size = PTHREAD_KEY_2NDLEVEL_SIZE;
-
-/* Mutex to protect access to pthread_keys */
-
-static pthread_mutex_t pthread_keys_mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/* Create a new key */
-
-int __pthread_key_create(pthread_key_t * key, destr_function destr)
-{
-  int i;
-
-  pthread_mutex_lock(&pthread_keys_mutex);
-  for (i = 0; i < PTHREAD_KEYS_MAX; i++) {
-    if (! pthread_keys[i].in_use) {
-      /* Mark key in use */
-      pthread_keys[i].in_use = 1;
-      pthread_keys[i].destr = destr;
-      pthread_mutex_unlock(&pthread_keys_mutex);
-      *key = i;
-      return 0;
-    }
-  }
-  pthread_mutex_unlock(&pthread_keys_mutex);
-  return EAGAIN;
-}
-strong_alias (__pthread_key_create, pthread_key_create)
-
-/* Reset deleted key's value to NULL in each live thread.
- * NOTE: this executes in the context of the thread manager! */
-
-struct pthread_key_delete_helper_args {
-  /* Damn, we need lexical closures in C! ;) */
-  unsigned int idx1st, idx2nd;
-  pthread_descr self;
-};
-
-static void pthread_key_delete_helper(void *arg, pthread_descr th)
-{
-  struct pthread_key_delete_helper_args *args = arg;
-  unsigned int idx1st = args->idx1st;
-  unsigned int idx2nd = args->idx2nd;
-  pthread_descr self = args->self;
-
-  if (self == 0)
-    self = args->self = thread_self();
-
-  if (!th->p_terminated) {
-    /* pthread_exit() may try to free th->p_specific[idx1st] concurrently. */
-    __pthread_lock(THREAD_GETMEM(th, p_lock), self);
-    if (th->p_specific[idx1st] != NULL)
-      th->p_specific[idx1st][idx2nd] = NULL;
-    __pthread_unlock(THREAD_GETMEM(th, p_lock));
-  }
-}
-
-/* Delete a key */
-int pthread_key_delete(pthread_key_t key)
-{
-  pthread_descr self = thread_self();
-
-  pthread_mutex_lock(&pthread_keys_mutex);
-  if (key >= PTHREAD_KEYS_MAX || !pthread_keys[key].in_use) {
-    pthread_mutex_unlock(&pthread_keys_mutex);
-    return EINVAL;
-  }
-  pthread_keys[key].in_use = 0;
-  pthread_keys[key].destr = NULL;
-
-  /* Set the value of the key to NULL in all running threads, so
-     that if the key is reallocated later by pthread_key_create, its
-     associated values will be NULL in all threads.
-
-     Do nothing if no threads have been created yet.  */
-
-  if (__pthread_manager_request != -1)
-    {
-      struct pthread_key_delete_helper_args args;
-      struct pthread_request request;
-
-      args.idx1st = key / PTHREAD_KEY_2NDLEVEL_SIZE;
-      args.idx2nd = key % PTHREAD_KEY_2NDLEVEL_SIZE;
-      args.self = 0;
-
-      request.req_thread = self;
-      request.req_kind = REQ_FOR_EACH_THREAD;
-      request.req_args.for_each.arg = &args;
-      request.req_args.for_each.fn = pthread_key_delete_helper;
-
-      TEMP_FAILURE_RETRY(__libc_write(__pthread_manager_request,
-				      (char *) &request, sizeof(request)));
-      suspend(self);
-    }
-
-  pthread_mutex_unlock(&pthread_keys_mutex);
-  return 0;
-}
-
-/* Set the value of a key */
-
-int __pthread_setspecific(pthread_key_t key, const void * pointer)
-{
-  pthread_descr self = thread_self();
-  unsigned int idx1st, idx2nd;
-
-  if (key >= PTHREAD_KEYS_MAX || !pthread_keys[key].in_use)
-    return EINVAL;
-  idx1st = key / PTHREAD_KEY_2NDLEVEL_SIZE;
-  idx2nd = key % PTHREAD_KEY_2NDLEVEL_SIZE;
-  if (THREAD_GETMEM_NC(self, p_specific[idx1st]) == NULL) {
-    void *newp = calloc(PTHREAD_KEY_2NDLEVEL_SIZE, sizeof (void *));
-    if (newp == NULL)
-      return ENOMEM;
-    THREAD_SETMEM_NC(self, p_specific[idx1st], newp);
-  }
-  THREAD_GETMEM_NC(self, p_specific[idx1st])[idx2nd] = (void *) pointer;
-  return 0;
-}
-strong_alias (__pthread_setspecific, pthread_setspecific)
-
-/* Get the value of a key */
-
-void * __pthread_getspecific(pthread_key_t key)
-{
-  pthread_descr self = thread_self();
-  unsigned int idx1st, idx2nd;
-
-  if (key >= PTHREAD_KEYS_MAX)
-    return NULL;
-  idx1st = key / PTHREAD_KEY_2NDLEVEL_SIZE;
-  idx2nd = key % PTHREAD_KEY_2NDLEVEL_SIZE;
-  if (THREAD_GETMEM_NC(self, p_specific[idx1st]) == NULL
-      || !pthread_keys[key].in_use)
-    return NULL;
-  return THREAD_GETMEM_NC(self, p_specific[idx1st])[idx2nd];
-}
-strong_alias (__pthread_getspecific, pthread_getspecific)
-
-/* Call the destruction routines on all keys */
-
-void __pthread_destroy_specifics()
-{
-  pthread_descr self = thread_self();
-  int i, j, round, found_nonzero;
-  destr_function destr;
-  void * data;
-
-  for (round = 0, found_nonzero = 1;
-       found_nonzero && round < PTHREAD_DESTRUCTOR_ITERATIONS;
-       round++) {
-    found_nonzero = 0;
-    for (i = 0; i < PTHREAD_KEY_1STLEVEL_SIZE; i++)
-      if (THREAD_GETMEM_NC(self, p_specific[i]) != NULL)
-        for (j = 0; j < PTHREAD_KEY_2NDLEVEL_SIZE; j++) {
-          destr = pthread_keys[i * PTHREAD_KEY_2NDLEVEL_SIZE + j].destr;
-          data = THREAD_GETMEM_NC(self, p_specific[i])[j];
-          if (destr != NULL && data != NULL) {
-            THREAD_GETMEM_NC(self, p_specific[i])[j] = NULL;
-            destr(data);
-            found_nonzero = 1;
-          }
-        }
-  }
-  __pthread_lock(THREAD_GETMEM(self, p_lock), self);
-  for (i = 0; i < PTHREAD_KEY_1STLEVEL_SIZE; i++) {
-    if (THREAD_GETMEM_NC(self, p_specific[i]) != NULL) {
-      free(THREAD_GETMEM_NC(self, p_specific[i]));
-      THREAD_SETMEM_NC(self, p_specific[i], NULL);
-    }
-  }
-  __pthread_unlock(THREAD_GETMEM(self, p_lock));
-}
-
-/* Thread-specific data for libc. */
-
-static int
-libc_internal_tsd_set(enum __libc_tsd_key_t key, const void * pointer)
-{
-  pthread_descr self = thread_self();
-
-  THREAD_SETMEM_NC(self, p_libc_specific[key], (void *) pointer);
-  return 0;
-}
-int (*__libc_internal_tsd_set)(enum __libc_tsd_key_t key, const void * pointer)
-     = libc_internal_tsd_set;
-
-static void *
-libc_internal_tsd_get(enum __libc_tsd_key_t key)
-{
-  pthread_descr self = thread_self();
-
-  return THREAD_GETMEM_NC(self, p_libc_specific[key]);
-}
-void * (*__libc_internal_tsd_get)(enum __libc_tsd_key_t key)
-     = libc_internal_tsd_get;
diff --git a/newlib/libc/sys/linux/linuxthreads/spinlock.c b/newlib/libc/sys/linux/linuxthreads/spinlock.c
deleted file mode 100644
index 3e1682599..000000000
--- a/newlib/libc/sys/linux/linuxthreads/spinlock.c
+++ /dev/null
@@ -1,774 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1998 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-/* Internal locks */
-
-#include <errno.h>
-#include <sched.h>
-#include <time.h>
-#include <stdlib.h>
-#include <limits.h>
-#include "pthread.h"
-#include "internals.h"
-#include "spinlock.h"
-#include "restart.h"
-
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-static void __pthread_acquire(int * spinlock);
-
-static inline void __pthread_release(int * spinlock)
-{
-  WRITE_MEMORY_BARRIER();
-  *spinlock = __LT_SPINLOCK_INIT;
-  __asm __volatile ("" : "=m" (*spinlock) : "0" (*spinlock));
-}
-#endif
-
-
-/* The status field of a spinlock is a pointer whose least significant
-   bit is a locked flag.
-
-   Thus the field values have the following meanings:
-
-   status == 0:       spinlock is free
-   status == 1:       spinlock is taken; no thread is waiting on it
-
-   (status & 1) == 1: spinlock is taken and (status & ~1L) is a
-                      pointer to the first waiting thread; other
-		      waiting threads are linked via the p_nextlock
-		      field.
-   (status & 1) == 0: same as above, but spinlock is not taken.
-
-   The waiting list is not sorted by priority order.
-   Actually, we always insert at top of list (sole insertion mode
-   that can be performed without locking).
-   For __pthread_unlock, we perform a linear search in the list
-   to find the highest-priority, oldest waiting thread.
-   This is safe because there are no concurrent __pthread_unlock
-   operations -- only the thread that locked the mutex can unlock it. */
-
-
-void internal_function __pthread_lock(struct _pthread_fastlock * lock,
-				      pthread_descr self)
-{
-#if defined HAS_COMPARE_AND_SWAP
-  long oldstatus, newstatus;
-  int successful_seizure, spurious_wakeup_count;
-  int spin_count;
-#endif
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_acquire(&lock->__spinlock);
-    return;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  /* First try it without preparation.  Maybe it's a completely
-     uncontested lock.  */
-  if (lock->__status == 0 && __compare_and_swap (&lock->__status, 0, 1))
-    return;
-
-  spurious_wakeup_count = 0;
-  spin_count = 0;
-
-again:
-
-  /* On SMP, try spinning to get the lock. */
-
-  if (__pthread_smp_kernel) {
-    int max_count = lock->__spinlock * 2 + 10;
-
-    if (max_count > MAX_ADAPTIVE_SPIN_COUNT)
-      max_count = MAX_ADAPTIVE_SPIN_COUNT;
-
-    for (spin_count = 0; spin_count < max_count; spin_count++) {
-      if (((oldstatus = lock->__status) & 1) == 0) {
-	if(__compare_and_swap(&lock->__status, oldstatus, oldstatus | 1))
-	{
-	  if (spin_count)
-	    lock->__spinlock += (spin_count - lock->__spinlock) / 8;
-	  READ_MEMORY_BARRIER();
-	  return;
-	}
-      }
-#ifdef BUSY_WAIT_NOP
-      BUSY_WAIT_NOP;
-#endif
-      __asm __volatile ("" : "=m" (lock->__status) : "0" (lock->__status));
-    }
-
-    lock->__spinlock += (spin_count - lock->__spinlock) / 8;
-  }
-
-  /* No luck, try once more or suspend. */
-
-  do {
-    oldstatus = lock->__status;
-    successful_seizure = 0;
-
-    if ((oldstatus & 1) == 0) {
-      newstatus = oldstatus | 1;
-      successful_seizure = 1;
-    } else {
-      if (self == NULL)
-	self = thread_self();
-      newstatus = (long) self | 1;
-    }
-
-    if (self != NULL) {
-      THREAD_SETMEM(self, p_nextlock, (pthread_descr) (oldstatus & ~1L));
-      /* Make sure the store in p_nextlock completes before performing
-         the compare-and-swap */
-      MEMORY_BARRIER();
-    }
-  } while(! __compare_and_swap(&lock->__status, oldstatus, newstatus));
-
-  /* Suspend with guard against spurious wakeup.
-     This can happen in pthread_cond_timedwait_relative, when the thread
-     wakes up due to timeout and is still on the condvar queue, and then
-     locks the queue to remove itself. At that point it may still be on the
-     queue, and may be resumed by a condition signal. */
-
-  if (!successful_seizure) {
-    for (;;) {
-      suspend(self);
-      if (self->p_nextlock != NULL) {
-	/* Count resumes that don't belong to us. */
-	spurious_wakeup_count++;
-	continue;
-      }
-      break;
-    }
-    goto again;
-  }
-
-  /* Put back any resumes we caught that don't belong to us. */
-  while (spurious_wakeup_count--)
-    restart(self);
-
-  READ_MEMORY_BARRIER();
-#endif
-}
-
-int __pthread_unlock(struct _pthread_fastlock * lock)
-{
-#if defined HAS_COMPARE_AND_SWAP
-  long oldstatus;
-  pthread_descr thr, * ptr, * maxptr;
-  int maxprio;
-#endif
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_release(&lock->__spinlock);
-    return 0;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  WRITE_MEMORY_BARRIER();
-
-again:
-  while ((oldstatus = lock->__status) == 1) {
-    if (__compare_and_swap_with_release_semantics(&lock->__status,
-	oldstatus, 0))
-      return 0;
-  }
-
-  /* Find thread in waiting queue with maximal priority */
-  ptr = (pthread_descr *) &lock->__status;
-  thr = (pthread_descr) (oldstatus & ~1L);
-  maxprio = 0;
-  maxptr = ptr;
-
-  /* Before we iterate over the wait queue, we need to execute
-     a read barrier, otherwise we may read stale contents of nodes that may
-     just have been inserted by other processors. One read barrier is enough to
-     ensure we have a stable list; we don't need one for each pointer chase
-     through the list, because we are the owner of the lock; other threads
-     can only add nodes at the front; if a front node is consistent,
-     the ones behind it must also be. */
-
-  READ_MEMORY_BARRIER();
-
-  while (thr != 0) {
-    if (thr->p_priority >= maxprio) {
-      maxptr = ptr;
-      maxprio = thr->p_priority;
-    }
-    ptr = &(thr->p_nextlock);
-    thr = *ptr;
-  }
-
-  /* Remove max prio thread from waiting list. */
-  if (maxptr == (pthread_descr *) &lock->__status) {
-    /* If max prio thread is at head, remove it with compare-and-swap
-       to guard against concurrent lock operation. This removal
-       also has the side effect of marking the lock as released
-       because the new status comes from thr->p_nextlock whose
-       least significant bit is clear. */
-    thr = (pthread_descr) (oldstatus & ~1L);
-    if (! __compare_and_swap_with_release_semantics
-	    (&lock->__status, oldstatus, (long)(thr->p_nextlock)))
-      goto again;
-  } else {
-    /* No risk of concurrent access, remove max prio thread normally.
-       But in this case we must also flip the least significant bit
-       of the status to mark the lock as released. */
-    thr = *maxptr;
-    *maxptr = thr->p_nextlock;
-
-    /* Ensure deletion from linked list completes before we
-       release the lock. */
-    WRITE_MEMORY_BARRIER();
-
-    do {
-      oldstatus = lock->__status;
-    } while (!__compare_and_swap_with_release_semantics(&lock->__status,
-	     oldstatus, oldstatus & ~1L));
-  }
-
-  /* Wake up the selected waiting thread. Woken thread can check
-     its own p_nextlock field for NULL to detect that it has been removed. No
-     barrier is needed here, since restart() and suspend() take
-     care of memory synchronization. */
-
-  thr->p_nextlock = NULL;
-  restart(thr);
-
-  return 0;
-#endif
-}
-
-/*
- * Alternate fastlocks do not queue threads directly. Instead, they queue
- * these wait queue node structures. When a timed wait wakes up due to
- * a timeout, it can leave its wait node in the queue (because there
- * is no safe way to remove from the quue). Some other thread will
- * deallocate the abandoned node.
- */
-
-
-struct wait_node {
-  struct wait_node *next;	/* Next node in null terminated linked list */
-  pthread_descr thr;		/* The thread waiting with this node */
-  int abandoned;		/* Atomic flag */
-};
-
-static long wait_node_free_list;
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-static int wait_node_free_list_spinlock;
-#endif
-
-/* Allocate a new node from the head of the free list using an atomic
-   operation, or else using malloc if that list is empty.  A fundamental
-   assumption here is that we can safely access wait_node_free_list->next.
-   That's because we never free nodes once we allocate them, so a pointer to a
-   node remains valid indefinitely. */
-
-static struct wait_node *wait_node_alloc(void)
-{
-#if defined HAS_COMPARE_AND_SWAP
-  long oldvalue, newvalue;
-#endif
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    struct wait_node *new_node = 0;
-
-    __pthread_acquire(&wait_node_free_list_spinlock);
-    if (wait_node_free_list != 0) {
-      new_node = (struct wait_node *) wait_node_free_list;
-      wait_node_free_list = (long) new_node->next;
-    }
-    WRITE_MEMORY_BARRIER();
-    wait_node_free_list_spinlock = 0;
-
-    if (new_node == 0)
-      return malloc(sizeof *wait_node_alloc());
-
-    return new_node;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    oldvalue = wait_node_free_list;
-
-    if (oldvalue == 0)
-      return malloc(sizeof *wait_node_alloc());
-
-    /* Ensure we don't read stale next link through oldvalue pointer. */
-    READ_MEMORY_BARRIER();
-    newvalue = (long) ((struct wait_node *) oldvalue)->next;
-  } while (! __compare_and_swap(&wait_node_free_list, oldvalue, newvalue));
-
-  return (struct wait_node *) oldvalue;
-#endif
-}
-
-/* Return a node to the head of the free list using an atomic
-   operation. */
-
-static void wait_node_free(struct wait_node *wn)
-{
-#if defined HAS_COMPARE_AND_SWAP
-  long oldvalue, newvalue;
-#endif
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_acquire(&wait_node_free_list_spinlock);
-    wn->next = (struct wait_node *) wait_node_free_list;
-    wait_node_free_list = (long) wn;
-    WRITE_MEMORY_BARRIER();
-    wait_node_free_list_spinlock = 0;
-    return;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    oldvalue = wait_node_free_list;
-    wn->next = (struct wait_node *) oldvalue;
-    newvalue = (long) wn;
-    /* Ensure node contents are written before we swap it into the list. */
-    WRITE_MEMORY_BARRIER();
-  } while (! __compare_and_swap(&wait_node_free_list, oldvalue, newvalue));
-#endif
-}
-
-#if defined HAS_COMPARE_AND_SWAP
-
-/* Remove a wait node from the specified queue.  It is assumed
-   that the removal takes place concurrently with only atomic insertions at the
-   head of the queue. */
-
-static void wait_node_dequeue(struct wait_node **pp_head,
-			      struct wait_node **pp_node,
-			      struct wait_node *p_node)
-{
-  /* If the node is being deleted from the head of the
-     list, it must be deleted using atomic compare-and-swap.
-     Otherwise it can be deleted in the straightforward way. */
-
-  if (pp_node == pp_head) {
-    /* We don't need a read barrier between these next two loads,
-       because it is assumed that the caller has already ensured
-       the stability of *p_node with respect to p_node. */
-
-    long oldvalue = (long) p_node;
-    long newvalue = (long) p_node->next;
-
-    if (__compare_and_swap((long *) pp_node, oldvalue, newvalue))
-      return;
-
-    /* Oops! Compare and swap failed, which means the node is
-       no longer first. We delete it using the ordinary method.  But we don't
-       know the identity of the node which now holds the pointer to the node
-       being deleted, so we must search from the beginning. */
-
-    for (pp_node = pp_head; p_node != *pp_node; ) {
-      pp_node = &(*pp_node)->next;
-      READ_MEMORY_BARRIER(); /* Stabilize *pp_node for next iteration. */
-    }
-  }
-
-  *pp_node = p_node->next;
-  return;
-}
-
-#endif
-
-void __pthread_alt_lock(struct _pthread_fastlock * lock,
-		        pthread_descr self)
-{
-#if defined HAS_COMPARE_AND_SWAP
-  long oldstatus, newstatus;
-#endif
-  struct wait_node wait_node;
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    int suspend_needed = 0;
-    __pthread_acquire(&lock->__spinlock);
-
-    if (lock->__status == 0)
-      lock->__status = 1;
-    else {
-      if (self == NULL)
-	self = thread_self();
-
-      wait_node.abandoned = 0;
-      wait_node.next = (struct wait_node *) lock->__status;
-      wait_node.thr = self;
-      lock->__status = (long) &wait_node;
-      suspend_needed = 1;
-    }
-
-    __pthread_release(&lock->__spinlock);
-
-    if (suspend_needed)
-      suspend (self);
-    return;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    oldstatus = lock->__status;
-    if (oldstatus == 0) {
-      newstatus = 1;
-    } else {
-      if (self == NULL)
-	self = thread_self();
-      wait_node.thr = self;
-      newstatus = (long) &wait_node;
-    }
-    wait_node.abandoned = 0;
-    wait_node.next = (struct wait_node *) oldstatus;
-    /* Make sure the store in wait_node.next completes before performing
-       the compare-and-swap */
-    MEMORY_BARRIER();
-  } while(! __compare_and_swap(&lock->__status, oldstatus, newstatus));
-
-  /* Suspend. Note that unlike in __pthread_lock, we don't worry
-     here about spurious wakeup. That's because this lock is not
-     used in situations where that can happen; the restart can
-     only come from the previous lock owner. */
-
-  if (oldstatus != 0)
-    suspend(self);
-
-  READ_MEMORY_BARRIER();
-#endif
-}
-
-/* Timed-out lock operation; returns 0 to indicate timeout. */
-
-int __pthread_alt_timedlock(struct _pthread_fastlock * lock,
-			    pthread_descr self, const struct timespec *abstime)
-{
-  long oldstatus = 0;
-#if defined HAS_COMPARE_AND_SWAP
-  long newstatus;
-#endif
-  struct wait_node *p_wait_node = wait_node_alloc();
-
-  /* Out of memory, just give up and do ordinary lock. */
-  if (p_wait_node == 0) {
-    __pthread_alt_lock(lock, self);
-    return 1;
-  }
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_acquire(&lock->__spinlock);
-
-    if (lock->__status == 0)
-      lock->__status = 1;
-    else {
-      if (self == NULL)
-	self = thread_self();
-
-      p_wait_node->abandoned = 0;
-      p_wait_node->next = (struct wait_node *) lock->__status;
-      p_wait_node->thr = self;
-      lock->__status = (long) p_wait_node;
-      oldstatus = 1; /* force suspend */
-    }
-
-    __pthread_release(&lock->__spinlock);
-    goto suspend;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    oldstatus = lock->__status;
-    if (oldstatus == 0) {
-      newstatus = 1;
-    } else {
-      if (self == NULL)
-	self = thread_self();
-      p_wait_node->thr = self;
-      newstatus = (long) p_wait_node;
-    }
-    p_wait_node->abandoned = 0;
-    p_wait_node->next = (struct wait_node *) oldstatus;
-    /* Make sure the store in wait_node.next completes before performing
-       the compare-and-swap */
-    MEMORY_BARRIER();
-  } while(! __compare_and_swap(&lock->__status, oldstatus, newstatus));
-#endif
-
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  suspend:
-#endif
-
-  /* If we did not get the lock, do a timed suspend. If we wake up due
-     to a timeout, then there is a race; the old lock owner may try
-     to remove us from the queue. This race is resolved by us and the owner
-     doing an atomic testandset() to change the state of the wait node from 0
-     to 1. If we succeed, then it's a timeout and we abandon the node in the
-     queue. If we fail, it means the owner gave us the lock. */
-
-  if (oldstatus != 0) {
-    if (timedsuspend(self, abstime) == 0) {
-      if (!testandset(&p_wait_node->abandoned))
-	return 0; /* Timeout! */
-
-      /* Eat oustanding resume from owner, otherwise wait_node_free() below
-	 will race with owner's wait_node_dequeue(). */
-      suspend(self);
-    }
-  }
-
-  wait_node_free(p_wait_node);
-
-  READ_MEMORY_BARRIER();
-
-  return 1; /* Got the lock! */
-}
-
-void __pthread_alt_unlock(struct _pthread_fastlock *lock)
-{
-  struct wait_node *p_node, **pp_node, *p_max_prio, **pp_max_prio;
-  struct wait_node ** const pp_head = (struct wait_node **) &lock->__status;
-  int maxprio;
-
-  WRITE_MEMORY_BARRIER();
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_acquire(&lock->__spinlock);
-  }
-#endif
-
-  while (1) {
-
-  /* If no threads are waiting for this lock, try to just
-     atomically release it. */
-#if defined TEST_FOR_COMPARE_AND_SWAP
-    if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-    {
-      if (lock->__status == 0 || lock->__status == 1) {
-	lock->__status = 0;
-	break;
-      }
-    }
-#endif
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-    else
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-    {
-      long oldstatus = lock->__status;
-      if (oldstatus == 0 || oldstatus == 1) {
-	if (__compare_and_swap_with_release_semantics (&lock->__status, oldstatus, 0))
-	  break;
-	else
-	  continue;
-      }
-    }
-#endif
-
-    /* Process the entire queue of wait nodes. Remove all abandoned
-       wait nodes and put them into the global free queue, and
-       remember the one unabandoned node which refers to the thread
-       having the highest priority. */
-
-    pp_max_prio = pp_node = pp_head;
-    p_max_prio = p_node = *pp_head;
-    maxprio = INT_MIN;
-
-    READ_MEMORY_BARRIER(); /* Prevent access to stale data through p_node */
-
-    while (p_node != (struct wait_node *) 1) {
-      int prio;
-
-      if (p_node->abandoned) {
-	/* Remove abandoned node. */
-#if defined TEST_FOR_COMPARE_AND_SWAP
-	if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-	  *pp_node = p_node->next;
-#endif
-#if defined TEST_FOR_COMPARE_AND_SWAP
-	else
-#endif
-#if defined HAS_COMPARE_AND_SWAP
-	  wait_node_dequeue(pp_head, pp_node, p_node);
-#endif
-	wait_node_free(p_node);
-	/* Note that the next assignment may take us to the beginning
-	   of the queue, to newly inserted nodes, if pp_node == pp_head.
-	   In that case we need a memory barrier to stabilize the first of
-	   these new nodes. */
-	p_node = *pp_node;
-	if (pp_node == pp_head)
-	  READ_MEMORY_BARRIER(); /* No stale reads through p_node */
-	continue;
-      } else if ((prio = p_node->thr->p_priority) >= maxprio) {
-	/* Otherwise remember it if its thread has a higher or equal priority
-	   compared to that of any node seen thus far. */
-	maxprio = prio;
-	pp_max_prio = pp_node;
-	p_max_prio = p_node;
-      }
-
-      /* This canno6 jump backward in the list, so no further read
-         barrier is needed. */
-      pp_node = &p_node->next;
-      p_node = *pp_node;
-    }
-
-    /* If all threads abandoned, go back to top */
-    if (maxprio == INT_MIN)
-      continue;
-
-    ASSERT (p_max_prio != (struct wait_node *) 1);
-
-    /* Now we want to to remove the max priority thread's wait node from
-       the list. Before we can do this, we must atomically try to change the
-       node's abandon state from zero to nonzero. If we succeed, that means we
-       have the node that we will wake up. If we failed, then it means the
-       thread timed out and abandoned the node in which case we repeat the
-       whole unlock operation. */
-
-    if (!testandset(&p_max_prio->abandoned)) {
-#if defined TEST_FOR_COMPARE_AND_SWAP
-      if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-	*pp_max_prio = p_max_prio->next;
-#endif
-#if defined TEST_FOR_COMPARE_AND_SWAP
-      else
-#endif
-#if defined HAS_COMPARE_AND_SWAP
-	wait_node_dequeue(pp_head, pp_max_prio, p_max_prio);
-#endif
-      restart(p_max_prio->thr);
-      break;
-    }
-  }
-
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    __pthread_release(&lock->__spinlock);
-  }
-#endif
-}
-
-
-/* Compare-and-swap emulation with a spinlock */
-
-#ifdef TEST_FOR_COMPARE_AND_SWAP
-int __pthread_has_cas = 0;
-#endif
-
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-
-int __pthread_compare_and_swap(long * ptr, long oldval, long newval,
-                               int * spinlock)
-{
-  int res;
-
-  __pthread_acquire(spinlock);
-
-  if (*ptr == oldval) {
-    *ptr = newval; res = 1;
-  } else {
-    res = 0;
-  }
-
-  __pthread_release(spinlock);
-
-  return res;
-}
-
-/* This function is called if the inlined test-and-set
-   in __pthread_compare_and_swap() failed */
-
-/* The retry strategy is as follows:
-   - We test and set the spinlock MAX_SPIN_COUNT times, calling
-     sched_yield() each time.  This gives ample opportunity for other
-     threads with priority >= our priority to make progress and
-     release the spinlock.
-   - If a thread with priority < our priority owns the spinlock,
-     calling sched_yield() repeatedly is useless, since we're preventing
-     the owning thread from making progress and releasing the spinlock.
-     So, after MAX_SPIN_LOCK attemps, we suspend the calling thread
-     using nanosleep().  This again should give time to the owning thread
-     for releasing the spinlock.
-     Notice that the nanosleep() interval must not be too small,
-     since the kernel does busy-waiting for short intervals in a realtime
-     process (!).  The smallest duration that guarantees thread
-     suspension is currently 2ms.
-   - When nanosleep() returns, we try again, doing MAX_SPIN_COUNT
-     sched_yield(), then sleeping again if needed. */
-
-static void __pthread_acquire(int * spinlock)
-{
-  int cnt = 0;
-  struct timespec tm;
-
-  READ_MEMORY_BARRIER();
-
-  while (testandset(spinlock)) {
-    if (cnt < MAX_SPIN_COUNT) {
-      sched_yield();
-      cnt++;
-    } else {
-      tm.tv_sec = 0;
-      tm.tv_nsec = SPIN_SLEEP_DURATION;
-      nanosleep(&tm, NULL);
-      cnt = 0;
-    }
-  }
-}
-
-#endif
diff --git a/newlib/libc/sys/linux/linuxthreads/spinlock.h b/newlib/libc/sys/linux/linuxthreads/spinlock.h
deleted file mode 100644
index 0ec40c57c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/spinlock.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Linuxthreads - a simple clone()-based implementation of Posix        */
-/* threads for Linux.                                                   */
-/* Copyright (C) 1998 Xavier Leroy (Xavier.Leroy@inria.fr)              */
-/*                                                                      */
-/* This program is free software; you can redistribute it and/or        */
-/* modify it under the terms of the GNU Library General Public License  */
-/* as published by the Free Software Foundation; either version 2       */
-/* of the License, or (at your option) any later version.               */
-/*                                                                      */
-/* This program is distributed in the hope that it will be useful,      */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
-/* GNU Library General Public License for more details.                 */
-
-#include <bits/initspin.h>
-
-
-/* There are 2 compare and swap synchronization primitives with
-   different semantics:
-
-	1. compare_and_swap, which has acquire semantics (i.e. it
-	completes befor subsequent writes.)
-	2. compare_and_swap_with_release_semantics, which has release
-	semantics (it completes after previous writes.)
-
-   For those platforms on which they are the same. HAS_COMPARE_AND_SWAP
-   should be defined. For those platforms on which they are different,
-   HAS_COMPARE_AND_SWAP_WITH_RELEASE_SEMANTICS has to be defined.  */
-
-#ifndef HAS_COMPARE_AND_SWAP
-#ifdef HAS_COMPARE_AND_SWAP_WITH_RELEASE_SEMANTICS
-#define HAS_COMPARE_AND_SWAP
-#endif
-#endif
-
-#if defined(TEST_FOR_COMPARE_AND_SWAP)
-
-extern int __pthread_has_cas;
-extern int __pthread_compare_and_swap(long * ptr, long oldval, long newval,
-                                      int * spinlock);
-
-static inline int compare_and_swap(long * ptr, long oldval, long newval,
-                                   int * spinlock)
-{
-  if (__builtin_expect (__pthread_has_cas, 1))
-    return __compare_and_swap(ptr, oldval, newval);
-  else
-    return __pthread_compare_and_swap(ptr, oldval, newval, spinlock);
-}
-
-#elif defined(HAS_COMPARE_AND_SWAP)
-
-#ifdef IMPLEMENT_TAS_WITH_CAS
-#define testandset(p) !__compare_and_swap((long int *) p, 0, 1)
-#endif
-
-#ifdef HAS_COMPARE_AND_SWAP_WITH_RELEASE_SEMANTICS
-
-static inline int
-compare_and_swap_with_release_semantics (long * ptr, long oldval,
-					 long newval, int * spinlock)
-{
-  return __compare_and_swap_with_release_semantics (ptr, oldval,
-						    newval);
-}
-
-#endif
-
-static inline int compare_and_swap(long * ptr, long oldval, long newval,
-                                   int * spinlock)
-{
-  return __compare_and_swap(ptr, oldval, newval);
-}
-
-#else
-
-extern int __pthread_compare_and_swap(long * ptr, long oldval, long newval,
-                                      int * spinlock);
-
-static inline int compare_and_swap(long * ptr, long oldval, long newval,
-                                   int * spinlock)
-{
-  return __pthread_compare_and_swap(ptr, oldval, newval, spinlock);
-}
-
-#endif
-
-#ifndef HAS_COMPARE_AND_SWAP_WITH_RELEASE_SEMANTICS
-#define compare_and_swap_with_release_semantics compare_and_swap
-#define __compare_and_swap_with_release_semantics __compare_and_swap
-#endif
-
-/* Internal locks */
-
-extern void internal_function __pthread_lock(struct _pthread_fastlock * lock,
-					     pthread_descr self);
-extern int __pthread_unlock(struct _pthread_fastlock *lock);
-
-static inline void __pthread_init_lock(struct _pthread_fastlock * lock)
-{
-  lock->__status = 0;
-  lock->__spinlock = __LT_SPINLOCK_INIT;
-}
-
-static inline int __pthread_trylock (struct _pthread_fastlock * lock)
-{
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    return (testandset(&lock->__spinlock) ? EBUSY : 0);
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    if (lock->__status != 0) return EBUSY;
-  } while(! __compare_and_swap(&lock->__status, 0, 1));
-  return 0;
-#endif
-}
-
-/* Variation of internal lock used for pthread_mutex_t, supporting
-   timed-out waits.  Warning: do not mix these operations with the above ones
-   over the same lock object! */
-
-extern void __pthread_alt_lock(struct _pthread_fastlock * lock,
-			       pthread_descr self);
-
-extern int __pthread_alt_timedlock(struct _pthread_fastlock * lock,
-			       pthread_descr self, const struct timespec *abstime);
-
-extern void __pthread_alt_unlock(struct _pthread_fastlock *lock);
-
-static inline void __pthread_alt_init_lock(struct _pthread_fastlock * lock)
-{
-  lock->__status = 0;
-  lock->__spinlock = __LT_SPINLOCK_INIT;
-}
-
-static inline int __pthread_alt_trylock (struct _pthread_fastlock * lock)
-{
-#if defined TEST_FOR_COMPARE_AND_SWAP
-  if (!__pthread_has_cas)
-#endif
-#if !defined HAS_COMPARE_AND_SWAP || defined TEST_FOR_COMPARE_AND_SWAP
-  {
-    int res = EBUSY;
-
-    if (testandset(&lock->__spinlock) == 0)
-      {
-	if (lock->__status == 0)
-	  {
-	    lock->__status = 1;
-	    WRITE_MEMORY_BARRIER();
-	    res = 0;
-	  }
-	lock->__spinlock = __LT_SPINLOCK_INIT;
-      }
-    return res;
-  }
-#endif
-
-#if defined HAS_COMPARE_AND_SWAP
-  do {
-    if (lock->__status != 0) return EBUSY;
-  } while(! compare_and_swap(&lock->__status, 0, 1, &lock->__spinlock));
-  return 0;
-#endif
-}
-
-/* Operations on pthread_atomic, which is defined in internals.h */
-
-static inline long atomic_increment(struct pthread_atomic *pa)
-{
-    long oldval;
-
-    do {
-	oldval = pa->p_count;
-    } while (!compare_and_swap(&pa->p_count, oldval, oldval + 1, &pa->p_spinlock));
-
-    return oldval;
-}
-
-
-static inline long atomic_decrement(struct pthread_atomic *pa)
-{
-    long oldval;
-
-    do {
-	oldval = pa->p_count;
-    } while (!compare_and_swap(&pa->p_count, oldval, oldval - 1, &pa->p_spinlock));
-
-    return oldval;
-}
-
-
-static inline void
-__pthread_set_own_extricate_if (pthread_descr self, pthread_extricate_if *peif)
-{
-  /* Only store a non-null peif if the thread has cancellation enabled.
-     Otherwise pthread_cancel will unconditionally call the extricate handler,
-     and restart the thread giving rise to forbidden spurious wakeups. */
-  if (peif == NULL
-      || THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE)
-    {
-      /* If we are removing the extricate interface, we need to synchronize
-	 against pthread_cancel so that it does not continue with a pointer
-         to a deallocated pthread_extricate_if struct! The thread lock
-         is (ab)used for this synchronization purpose. */
-      if (peif == NULL)
-	__pthread_lock (THREAD_GETMEM(self, p_lock), self);
-      THREAD_SETMEM(self, p_extricate, peif);
-      if (peif == NULL)
-	__pthread_unlock (THREAD_GETMEM(self, p_lock));
-    }
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/sysctl.c b/newlib/libc/sys/linux/linuxthreads/sysctl.c
deleted file mode 100644
index 2512f17f1..000000000
--- a/newlib/libc/sys/linux/linuxthreads/sysctl.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Read or write system information.  Linux version.
-   Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/sysctl.h>
-
-#include <machine/syscall.h>
-
-static _syscall1(int,_sysctl,struct __sysctl_args *,args)
-
-int
-__sysctl (int *name, int nlen, void *oldval, size_t *oldlenp,
-	  void *newval, size_t newlen)
-{
-  struct __sysctl_args args =
-  {
-    name: name,
-    nlen: nlen,
-    oldval: oldval,
-    oldlenp: oldlenp,
-    newval: newval,
-    newlen: newlen
-  };
-
-  return _sysctl(&args);
-}
-weak_alias (__sysctl, sysctl)
diff --git a/newlib/libc/sys/linux/linuxthreads/td_init.c b/newlib/libc/sys/linux/linuxthreads/td_init.c
deleted file mode 100644
index c9d08e9ac..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_init.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Initialization function of thread debugger support library.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-int __td_debug;
-
-
-td_err_e
-td_init (void)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_init");
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_log.c b/newlib/libc/sys/linux/linuxthreads/td_log.c
deleted file mode 100644
index 531cf87d3..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_log.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Noop, left for historical reasons.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_log (void)
-{
-  /* This interface is deprecated in the Sun interface.  We provide it
-     for compatibility but don't do anyhting ourself.  We might in
-     future do some logging if this seems reasonable.  */
-  LOG ("td_log");
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_symbol_list.c b/newlib/libc/sys/linux/linuxthreads/td_symbol_list.c
deleted file mode 100644
index e64d298f9..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_symbol_list.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/* Return list of symbols the library can request.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <assert.h>
-#include <gnu/lib-names.h>
-#include "thread_dbP.h"
-
-
-static const char *symbol_list_arr[] =
-{
-  [PTHREAD_THREADS_EVENTS] = "__pthread_threads_events",
-  [PTHREAD_LAST_EVENT] = "__pthread_last_event",
-  [PTHREAD_HANDLES_NUM] = "__pthread_handles_num",
-  [PTHREAD_HANDLES] = "__pthread_handles",
-  [PTHREAD_KEYS] = "pthread_keys",
-  [LINUXTHREADS_PTHREAD_THREADS_MAX] = "__linuxthreads_pthread_threads_max",
-  [LINUXTHREADS_PTHREAD_KEYS_MAX] = "__linuxthreads_pthread_keys_max",
-  [LINUXTHREADS_PTHREAD_SIZEOF_DESCR] = "__linuxthreads_pthread_sizeof_descr",
-  [LINUXTHREADS_CREATE_EVENT] = "__linuxthreads_create_event",
-  [LINUXTHREADS_DEATH_EVENT] = "__linuxthreads_death_event",
-  [LINUXTHREADS_REAP_EVENT] = "__linuxthreads_reap_event",
-  [NUM_MESSAGES] = NULL
-};
-
-
-const char **
-td_symbol_list (void)
-{
-  return symbol_list_arr;
-}
-
-
-int
-td_lookup (struct ps_prochandle *ps, int idx, psaddr_t *sym_addr)
-{
-  assert (idx >= 0 && idx < NUM_MESSAGES);
-  return ps_pglobal_lookup (ps, LIBPTHREAD_SO, symbol_list_arr[idx], sym_addr);
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_clear_event.c b/newlib/libc/sys/linux/linuxthreads/td_ta_clear_event.c
deleted file mode 100644
index 151283394..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_clear_event.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Globally disable events.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_clear_event (ta, event)
-     const td_thragent_t *ta;
-     td_thr_events_t *event;
-{
-  td_thr_events_t old_event;
-  int i;
-
-  LOG ("td_ta_clear_event");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdread (ta->ph, ta->pthread_threads_eventsp,
-		 &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Remove the set bits in.  */
-  for (i = 0; i < TD_EVENTSIZE; ++i)
-    old_event.event_bits[i] &= ~event->event_bits[i];
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdwrite (ta->ph, ta->pthread_threads_eventsp,
-		  &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_delete.c b/newlib/libc/sys/linux/linuxthreads/td_ta_delete.c
deleted file mode 100644
index 6af436813..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_delete.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Detach to target process.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stdlib.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_delete (td_thragent_t *ta)
-{
-  LOG ("td_ta_delete");
-
-  /* Safety check.  */
-  if (ta == NULL || __td_agent_list == NULL)
-    return TD_BADTA;
-
-  /* Remove the handle from the list.  */
-  if (ta == __td_agent_list->ta)
-    /* It's the first element of the list.  */
-    __td_agent_list = __td_agent_list->next;
-  else
-    {
-      /* We have to search for it.  */
-      struct agent_list *runp = __td_agent_list;
-
-      while (runp->next != NULL && runp->next->ta != ta)
-	runp = runp->next;
-
-      if (runp->next == NULL)
-	/* It's not a valid decriptor since it is not in the list.  */
-	return TD_BADTA;
-
-      runp->next = runp->next->next;
-    }
-
-  /* The handle was allocated in `td_ta_new'.  */
-  free (ta);
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_enable_stats.c b/newlib/libc/sys/linux/linuxthreads/td_ta_enable_stats.c
deleted file mode 100644
index 43de1b2e6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_enable_stats.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Enable collection of statistics for process.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_enable_stats (const td_thragent_t *ta, int enable)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_ta_enable_stats");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_event_addr.c b/newlib/libc/sys/linux/linuxthreads/td_ta_event_addr.c
deleted file mode 100644
index 8bce35ae8..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_event_addr.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Get event address.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_event_addr (const td_thragent_t *ta, td_event_e event, td_notify_t *addr)
-{
-  td_err_e res = TD_NOEVENT;
-  int idx = -1;
-
-  LOG ("td_ta_event_addr");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  switch (event)
-    {
-    case TD_CREATE:
-      idx = LINUXTHREADS_CREATE_EVENT;
-      break;
-
-    case TD_DEATH:
-      idx = LINUXTHREADS_DEATH_EVENT;
-      break;
-
-    case TD_REAP:
-      idx = LINUXTHREADS_REAP_EVENT;
-      break;
-
-    default:
-      /* Event cannot be handled.  */
-      break;
-    }
-
-  /* Now get the address.  */
-  if (idx != -1)
-    {
-      psaddr_t taddr;
-
-      if (td_lookup (ta->ph, idx, &taddr) == PS_OK)
-	{
-	  /* Success, we got the address.  */
-	  addr->type = NOTIFY_BPT;
-	  addr->u.bptaddr = taddr;
-
-	  res = TD_OK;
-	}
-      else
-	res = TD_ERR;
-    }
-
-  return res;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_event_getmsg.c b/newlib/libc/sys/linux/linuxthreads/td_ta_event_getmsg.c
deleted file mode 100644
index a4ccba3d0..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_event_getmsg.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* Retrieve event.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <string.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_event_getmsg (const td_thragent_t *ta, td_event_msg_t *msg)
-{
-  /* XXX I cannot think of another way but using a static variable.  */
-  static td_thrhandle_t th;
-  td_eventbuf_t event;
-  psaddr_t addr;
-
-  LOG ("td_ta_event_getmsg");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Get the pointer to the thread descriptor with the last event.  */
-  if (ps_pdread (ta->ph, ta->pthread_last_event,
-		 &addr, sizeof (void *)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* If the pointer is NULL no event occurred.  */
-  if (addr == 0)
-    return TD_NOMSG;
-
-  /* Read the even structure from the target.  */
-  if (ps_pdread (ta->ph,
-		 ((char *) addr
-		  + offsetof (struct _pthread_descr_struct, p_eventbuf)),
-		 &event, sizeof (td_eventbuf_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Check whether an event occurred.  */
-  if (event.eventnum == TD_EVENT_NONE)
-    {
-      /* Oh well, this means the last event was already read.  So
-	 we have to look for any other event.  */
-      struct pthread_handle_struct handles[ta->pthread_threads_max];
-      int num;
-      int i;
-
-      /* Read the number of currently active threads.  */
-      if (ps_pdread (ta->ph, ta->pthread_handles_num, &num, sizeof (int))
-	  != PS_OK)
-	return TD_ERR;	/* XXX Other error value?  */
-
-      /* Now read the handles.  */
-      if (ps_pdread (ta->ph, ta->handles, handles,
-		     ta->pthread_threads_max * sizeof (handles[0])) != PS_OK)
-	return TD_ERR;	/* XXX Other error value?  */
-
-      for (i = 0; i < ta->pthread_threads_max && num > 0; ++i)
-	{
-	  if (handles[i].h_descr == NULL)
-	    /* No entry here.  */
-	    continue;
-
-	  /* First count this active thread.  */
-	  --num;
-
-	  if (handles[i].h_descr == addr)
-	    /* We already handled this.  */
-	    continue;
-
-	  /* Read the event data for this thread.  */
-	  if (ps_pdread (ta->ph,
-			 ((char *) handles[i].h_descr
-			  + offsetof (struct _pthread_descr_struct,
-				      p_eventbuf)),
-			 &event, sizeof (td_eventbuf_t)) != PS_OK)
-	    return TD_ERR;
-
-	  if (event.eventnum != TD_EVENT_NONE)
-	    {
-	      /* We found a thread with an unreported event.  */
-	      addr = handles[i].h_descr;
-	      break;
-	    }
-	}
-
-      /* If we haven't found any other event signal this to the user.  */
-      if (event.eventnum == TD_EVENT_NONE)
-	return TD_NOMSG;
-    }
-
-  /* Generate the thread descriptor.  */
-  th.th_ta_p = (td_thragent_t *) ta;
-  th.th_unique = addr;
-
-  /* Fill the user's data structure.  */
-  msg->event = event.eventnum;
-  msg->th_p = &th;
-  msg->msg.data = (uintptr_t) event.eventdata;
-
-  /* And clear the event message in the target.  */
-  memset (&event, '\0', sizeof (td_eventbuf_t));
-  if (ps_pdwrite (ta->ph,
-		  ((char *) addr
-		   + offsetof (struct _pthread_descr_struct, p_eventbuf)),
-		  &event, sizeof (td_eventbuf_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_get_nthreads.c b/newlib/libc/sys/linux/linuxthreads/td_ta_get_nthreads.c
deleted file mode 100644
index 839b56be5..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_get_nthreads.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Get the number of threads in the process.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-td_err_e
-td_ta_get_nthreads (const td_thragent_t *ta, int *np)
-{
-  psaddr_t addr;
-
-  LOG ("td_ta_get_nthreads");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Access the variable `__pthread_handles_num'.  */
-  if (td_lookup (ta->ph, PTHREAD_HANDLES_NUM, &addr) != PS_OK)
-     return TD_ERR;	/* XXX Other error value?  */
-
-  if (ps_pdread (ta->ph, addr, np, sizeof (int)) != PS_OK)
-     return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_get_ph.c b/newlib/libc/sys/linux/linuxthreads/td_ta_get_ph.c
deleted file mode 100644
index ffa833d92..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_get_ph.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Get external process handle.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_get_ph (const td_thragent_t *ta, struct ps_prochandle **ph)
-{
-  LOG ("td_ta_get_ph");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  *ph = ta->ph;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_get_stats.c b/newlib/libc/sys/linux/linuxthreads/td_ta_get_stats.c
deleted file mode 100644
index d2ba342d7..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_get_stats.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Retrieve statistics for process.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_get_stats (const td_thragent_t *ta, td_ta_stats_t *statsp)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_ta_get_stats");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_map_id2thr.c b/newlib/libc/sys/linux/linuxthreads/td_ta_map_id2thr.c
deleted file mode 100644
index 184f2de2e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_map_id2thr.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Map thread ID to thread handle.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_map_id2thr (const td_thragent_t *ta, pthread_t pt, td_thrhandle_t *th)
-{
-  struct pthread_handle_struct phc;
-  struct _pthread_descr_struct pds;
-  int pthread_threads_max;
-
-  LOG ("td_ta_map_id2thr");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Make the following expression a bit smaller.  */
-  pthread_threads_max = ta->pthread_threads_max;
-
-  /* We can compute the entry in the handle array we want.  */
-  if (ps_pdread (ta->ph, ta->handles + pt % pthread_threads_max, &phc,
-		 sizeof (struct pthread_handle_struct)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Test whether this entry is in use.  */
-  if (phc.h_descr == NULL)
-    return TD_BADTH;
-
-  /* Next test: get the descriptor to see whether this is not an old
-     thread handle.  */
-  if (ps_pdread (ta->ph, phc.h_descr, &pds,
-		 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  if (pds.p_tid != pt)
-    return TD_BADTH;
-
-  if (pds.p_terminated != 0)
-    return TD_NOTHR;
-
-  /* Create the `td_thrhandle_t' object.  */
-  th->th_ta_p = (td_thragent_t *) ta;
-  th->th_unique = phc.h_descr;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c b/newlib/libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c
deleted file mode 100644
index 78b9fbb66..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* Which thread is running on an lwp?
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_map_lwp2thr (const td_thragent_t *ta, lwpid_t lwpid, td_thrhandle_t *th)
-{
-  int pthread_threads_max = ta->pthread_threads_max;
-  size_t sizeof_descr = ta->sizeof_descr;
-  struct pthread_handle_struct phc[pthread_threads_max];
-  size_t cnt;
-#ifdef ALL_THREADS_STOPPED
-  int num;
-#else
-# define num 1
-#endif
-
-  LOG ("td_ta_map_lwp2thr");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Read all the descriptors.  */
-  if (ps_pdread (ta->ph, ta->handles, phc,
-		 sizeof (struct pthread_handle_struct) * pthread_threads_max)
-      != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-#ifdef ALL_THREADS_STOPPED
-  /* Read the number of currently active threads.  */
-  if (ps_pdread (ta->ph, ta->pthread_handles_num, &num, sizeof (int)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-#endif
-
-  /* Get the entries one after the other and find out whether the ID
-     matches.  */
-  for (cnt = 0; cnt < pthread_threads_max && num > 0; ++cnt)
-    if (phc[cnt].h_descr != NULL)
-      {
-	struct _pthread_descr_struct pds;
-
-#ifdef ALL_THREADS_STOPPED
-	/* First count this active thread.  */
-	--num;
-#endif
-
-	if (ps_pdread (ta->ph, phc[cnt].h_descr, &pds, sizeof_descr) != PS_OK)
-	  return TD_ERR;	/* XXX Other error value?  */
-
-	if ((pds.p_pid ?: ps_getpid (ta->ph)) == lwpid)
-	  {
-	    /* Found it.  Now fill in the `td_thrhandle_t' object.  */
-	    th->th_ta_p = (td_thragent_t *) ta;
-	    th->th_unique = phc[cnt].h_descr;
-
-	    return TD_OK;
-	  }
-    }
-
-  return TD_NOLWP;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_new.c b/newlib/libc/sys/linux/linuxthreads/td_ta_new.c
deleted file mode 100644
index 7505f53e6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_new.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* Attach to target process.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <stdlib.h>
-
-#include "thread_dbP.h"
-
-
-/* Datatype for the list of known thread agents.  Normally there will
-   be exactly one so we don't spend much though on making it fast.  */
-struct agent_list *__td_agent_list;
-
-
-td_err_e
-td_ta_new (struct ps_prochandle *ps, td_thragent_t **ta)
-{
-  psaddr_t addr;
-  struct agent_list *elemp;
-
-  LOG ("td_ta_new");
-
-  /* Get the global event mask.  This is one of the variables which
-     are new in the thread library to enable debugging.  If it is
-     not available we cannot debug.  */
-  if (td_lookup (ps, PTHREAD_THREADS_EVENTS, &addr) != PS_OK)
-    return TD_NOLIBTHREAD;
-
-  /* Fill in the appropriate information.  */
-  *ta = (td_thragent_t *) malloc (sizeof (td_thragent_t));
-  if (*ta == NULL)
-    return TD_MALLOC;
-
-  /* Store the proc handle which we will pass to the callback functions
-     back into the debugger.  */
-  (*ta)->ph = ps;
-
-  /* Remember the address.  */
-  (*ta)->pthread_threads_eventsp = (td_thr_events_t *) addr;
-
-  /* Get the pointer to the variable pointing to the thread descriptor
-     with the last event.  */
-  if (td_lookup (ps, PTHREAD_LAST_EVENT, &(*ta)->pthread_last_event) != PS_OK)
-    {
-    free_return:
-      free (*ta);
-      return TD_ERR;
-    }
-
-  /* Get the pointer to the variable containing the number of active
-     threads.  */
-  if (td_lookup (ps, PTHREAD_HANDLES_NUM, &(*ta)->pthread_handles_num)
-      != PS_OK)
-    goto free_return;
-
-  /* See whether the library contains the necessary symbols.  */
-  if (td_lookup (ps, PTHREAD_HANDLES, &addr) != PS_OK)
-    goto free_return;
-
-  (*ta)->handles = (struct pthread_handle_struct *) addr;
-
-
-  if (td_lookup (ps, PTHREAD_KEYS, &addr) != PS_OK)
-    goto free_return;
-
-  /* Cast to the right type.  */
-  (*ta)->keys = (struct pthread_key_struct *) addr;
-
-  /* Find out about the maximum number of threads.  Old implementations
-     don't provide this information.  In this case we assume that the
-     debug  library is compiled with the same values.  */
-  if (td_lookup (ps, LINUXTHREADS_PTHREAD_THREADS_MAX, &addr) != PS_OK)
-    (*ta)->pthread_threads_max = PTHREAD_THREADS_MAX;
-  else
-    {
-      if (ps_pdread (ps, addr, &(*ta)->pthread_threads_max, sizeof (int))
-	  != PS_OK)
-	goto free_return;
-    }
-
-  /* Similar for the maximum number of thread local data keys.  */
-  if (td_lookup (ps, LINUXTHREADS_PTHREAD_KEYS_MAX, &addr) != PS_OK)
-    (*ta)->pthread_keys_max = PTHREAD_KEYS_MAX;
-  else
-    {
-      if (ps_pdread (ps, addr, &(*ta)->pthread_keys_max, sizeof (int))
-	  != PS_OK)
-	goto free_return;
-    }
-
-  /* And for the size of the second level arrays for the keys.  */
-  if (td_lookup (ps, LINUXTHREADS_PTHREAD_SIZEOF_DESCR, &addr) != PS_OK)
-    (*ta)->sizeof_descr = sizeof (struct _pthread_descr_struct);
-  else
-    {
-      if (ps_pdread (ps, addr, &(*ta)->sizeof_descr, sizeof (int)) != PS_OK)
-	goto free_return;
-    }
-
-  /* Now add the new agent descriptor to the list.  */
-  elemp = (struct agent_list *) malloc (sizeof (struct agent_list));
-  if (elemp == NULL)
-    {
-      /* Argh, now that everything else worked...  */
-      free (*ta);
-      return TD_MALLOC;
-    }
-
-  /* We don't care for thread-safety here.  */
-  elemp->ta = *ta;
-  elemp->next = __td_agent_list;
-  __td_agent_list = elemp;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_reset_stats.c b/newlib/libc/sys/linux/linuxthreads/td_ta_reset_stats.c
deleted file mode 100644
index 533d4c412..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_reset_stats.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Reset statistics.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_reset_stats (const td_thragent_t *ta)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_ta_reset_stats");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_set_event.c b/newlib/libc/sys/linux/linuxthreads/td_ta_set_event.c
deleted file mode 100644
index 041aaec40..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_set_event.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Globally enable events.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_set_event (ta, event)
-     const td_thragent_t *ta;
-     td_thr_events_t *event;
-{
-  td_thr_events_t old_event;
-  int i;
-
-  LOG ("td_ta_set_event");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdread (ta->ph, ta->pthread_threads_eventsp,
-		 &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Or the new bits in.  */
-  for (i = 0; i < TD_EVENTSIZE; ++i)
-    old_event.event_bits[i] |= event->event_bits[i];
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdwrite (ta->ph, ta->pthread_threads_eventsp,
-		  &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_setconcurrency.c b/newlib/libc/sys/linux/linuxthreads/td_ta_setconcurrency.c
deleted file mode 100644
index da15a0f61..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_setconcurrency.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Set suggested concurrency level for process.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_ta_setconcurrency (const td_thragent_t *ta, int level)
-{
-  /* This is something LinuxThreads does not support.  */
-  LOG ("td_ta_setconcurrency");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  return TD_NOCAPAB;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_thr_iter.c b/newlib/libc/sys/linux/linuxthreads/td_ta_thr_iter.c
deleted file mode 100644
index a77186d22..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_thr_iter.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Iterate over a process's threads.
-   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-#include <alloca.h>
-
-static int
-handle_descr (const td_thragent_t *ta, td_thr_iter_f *callback,
-	      void *cbdata_p, td_thr_state_e state, int ti_pri,
-	      size_t cnt, pthread_descr descr)
-{
-  struct _pthread_descr_struct pds;
-  size_t sizeof_descr = ta->sizeof_descr;
-  td_thrhandle_t th;
-
-  if (ps_pdread (ta->ph, descr, &pds, sizeof_descr) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* The manager thread must be handled special.  The descriptor
-     exists but the thread only gets created when the first
-     `pthread_create' call is issued.  A clear indication that this
-     happened is when the p_pid field is non-zero.  */
-  if (cnt == 1 && pds.p_pid == 0)
-    return TD_OK;
-
-  /* Now test whether this thread matches the specified
-     conditions.  */
-
-  /* Only if the priority level is as high or higher.  */
-  if (pds.p_priority < ti_pri)
-    return TD_OK;
-
-  /* Test the state.
-     XXX This is incomplete.  */
-  if (state != TD_THR_ANY_STATE)
-    return TD_OK;
-
-  /* XXX For now we ignore threads which are not running anymore.
-     The reason is that gdb tries to get the registers and fails.
-     In future we should have a special mode of the thread library
-     in which we keep the process around until the actual join
-     operation happened.  */
-  if (pds.p_exited != 0)
-    return TD_OK;
-
-  /* Yep, it matches.  Call the callback function.  */
-  th.th_ta_p = (td_thragent_t *) ta;
-  th.th_unique = descr;
-  if (callback (&th, cbdata_p) != 0)
-    return TD_DBERR;
-
-  /* All done successfully.  */
-  return TD_OK;
-}
-
-
-td_err_e
-td_ta_thr_iter (const td_thragent_t *ta, td_thr_iter_f *callback,
-		void *cbdata_p, td_thr_state_e state, int ti_pri,
-		sigset_t *ti_sigmask_p, unsigned int ti_user_flags)
-{
-  int pthread_threads_max;
-  struct pthread_handle_struct *phc;
-  td_err_e result = TD_OK;
-  int cnt;
-#ifdef ALL_THREADS_STOPPED
-  int num;
-#else
-# define num 1
-#endif
-
-  LOG ("td_ta_thr_iter");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  pthread_threads_max = ta->pthread_threads_max;
-  phc = (struct pthread_handle_struct *) alloca (sizeof (phc[0])
-						 * pthread_threads_max);
-
-  /* First read only the main thread and manager thread information.  */
-  if (ps_pdread (ta->ph, ta->handles, phc,
-		 sizeof (struct pthread_handle_struct) * 2) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Now handle these descriptors.  */
-  result = handle_descr (ta, callback, cbdata_p, state, ti_pri, 0,
-			 phc[0].h_descr);
-  if (result != TD_OK)
-    return result;
-  result = handle_descr (ta, callback, cbdata_p, state, ti_pri, 1,
-			 phc[1].h_descr);
-  if (result != TD_OK)
-    return result;
-
-  /* Read all the descriptors.  */
-  if (ps_pdread (ta->ph, ta->handles + 2, &phc[2],
-		 (sizeof (struct pthread_handle_struct)
-		  * (pthread_threads_max - 2))) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-#ifdef ALL_THREADS_STOPPED
-  /* Read the number of currently active threads.  */
-  if (ps_pdread (ta->ph, ta->pthread_handles_num, &num, sizeof (int)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-#endif
-
-  /* Now get all descriptors, one after the other.  */
-  for (cnt = 2; cnt < pthread_threads_max && num > 0; ++cnt)
-    if (phc[cnt].h_descr != NULL)
-      {
-#ifdef ALL_THREADS_STOPPED
-	/* First count this active thread.  */
-	--num;
-#endif
-
-	result = handle_descr (ta, callback, cbdata_p, state, ti_pri, cnt,
-			       phc[cnt].h_descr);
-	if (result != TD_OK)
-	  break;
-      }
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_ta_tsd_iter.c b/newlib/libc/sys/linux/linuxthreads/td_ta_tsd_iter.c
deleted file mode 100644
index 92ceb1f28..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_ta_tsd_iter.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/* Iterate over a process's thread-specific data.
-   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-#include <alloca.h>
-
-td_err_e
-td_ta_tsd_iter (const td_thragent_t *ta, td_key_iter_f *callback,
-		void *cbdata_p)
-{
-  struct pthread_key_struct *keys;
-  int pthread_keys_max;
-  int cnt;
-
-  LOG ("td_ta_tsd_iter");
-
-  /* Test whether the TA parameter is ok.  */
-  if (! ta_ok (ta))
-    return TD_BADTA;
-
-  pthread_keys_max = ta->pthread_keys_max;
-  keys = (struct pthread_key_struct *) alloca (sizeof (keys[0])
-					       * pthread_keys_max);
-
-  /* Read all the information about the keys.  */
-  if (ps_pdread (ta->ph, ta->keys, keys,
-		 sizeof (keys[0]) * pthread_keys_max) != PS_OK)
-	return TD_ERR;	/* XXX Other error value?  */
-
-  /* Now get all descriptors, one after the other.  */
-  for (cnt = 0; cnt < pthread_keys_max; ++cnt)
-    if (keys[cnt].in_use
-	/* Return with an error if the callback returns a nonzero value.  */
-	&& callback (cnt, keys[cnt].destr, cbdata_p) != 0)
-      return TD_DBERR;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_clear_event.c b/newlib/libc/sys/linux/linuxthreads/td_thr_clear_event.c
deleted file mode 100644
index e40e4c36c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_clear_event.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Disable specific event for thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_clear_event (th, event)
-     const td_thrhandle_t *th;
-     td_thr_events_t *event;
-{
-  td_thr_events_t old_event;
-  int i;
-
-  LOG ("td_thr_clear_event");
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdread (th->th_ta_p->ph,
-		 ((char *) th->th_unique
-		  + offsetof (struct _pthread_descr_struct,
-			      p_eventbuf.eventmask)),
-		 &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Remove the set bits in.  */
-  for (i = 0; i < TD_EVENTSIZE; ++i)
-    old_event.event_bits[i] &= ~event->event_bits[i];
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdwrite (th->th_ta_p->ph,
-		  ((char *) th->th_unique
-		   + offsetof (struct _pthread_descr_struct,
-			       p_eventbuf.eventmask)),
-		  &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_dbresume.c b/newlib/libc/sys/linux/linuxthreads/td_thr_dbresume.c
deleted file mode 100644
index dbe10bc1c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_dbresume.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Resume execution of given thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_dbresume (const td_thrhandle_t *th)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_thr_dbresume");
-  return TD_NOCAPAB;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_dbsuspend.c b/newlib/libc/sys/linux/linuxthreads/td_thr_dbsuspend.c
deleted file mode 100644
index f96be3628..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_dbsuspend.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Suspend execution of given thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_dbsuspend (const td_thrhandle_t *th)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_thr_dbsuspend");
-  return TD_NOCAPAB;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_event_enable.c b/newlib/libc/sys/linux/linuxthreads/td_thr_event_enable.c
deleted file mode 100644
index 3eecd21e2..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_event_enable.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Enable event process-wide.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_event_enable (th, onoff)
-     const td_thrhandle_t *th;
-     int onoff;
-{
-  LOG ("td_thr_event_enable");
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdwrite (th->th_ta_p->ph,
-		  ((char *) th->th_unique
-		   + offsetof (struct _pthread_descr_struct, p_report_events)),
-		  &onoff, sizeof (int)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_event_getmsg.c b/newlib/libc/sys/linux/linuxthreads/td_thr_event_getmsg.c
deleted file mode 100644
index 582e89e5f..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_event_getmsg.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Retrieve event.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <string.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_event_getmsg (const td_thrhandle_t *th, td_event_msg_t *msg)
-{
-  td_eventbuf_t event;
-
-  LOG ("td_thr_event_getmsg");
-
-  /* Read the even structure from the target.  */
-  if (ps_pdread (th->th_ta_p->ph,
-		 ((char *) th->th_unique
-		  + offsetof (struct _pthread_descr_struct, p_eventbuf)),
-		 &event, sizeof (td_eventbuf_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Check whether an event occurred.  */
-  if (event.eventnum == TD_EVENT_NONE)
-    /* Nothing.  */
-    return TD_NOMSG;
-
-  /* Fill the user's data structure.  */
-  msg->event = event.eventnum;
-  msg->th_p = th;
-  msg->msg.data = (uintptr_t) event.eventdata;
-
-  /* And clear the event message in the target.  */
-  memset (&event, '\0', sizeof (td_eventbuf_t));
-  if (ps_pdwrite (th->th_ta_p->ph,
-		  ((char *) th->th_unique
-		   + offsetof (struct _pthread_descr_struct, p_eventbuf)),
-		  &event, sizeof (td_eventbuf_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_get_info.c b/newlib/libc/sys/linux/linuxthreads/td_thr_get_info.c
deleted file mode 100644
index b4979583a..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_get_info.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Get thread information.
-   Copyright (C) 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <string.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_get_info (const td_thrhandle_t *th, td_thrinfo_t *infop)
-{
-  struct _pthread_descr_struct pds;
-
-  LOG ("td_thr_get_info");
-
-  /* Get the thread descriptor.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-		 th->th_ta_p->sizeof_descr) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Fill in information.  Clear first to provide reproducable
-     results for the fields we do not fill in.  */
-  memset (infop, '\0', sizeof (td_thrinfo_t));
-
-  /* We have to handle the manager thread special since the thread
-     descriptor in older versions is not fully initialized.  */
-  if (pds.p_nr == 1)
-    {
-      infop->ti_tid = th->th_ta_p->pthread_threads_max * 2 + 1;
-      infop->ti_type = TD_THR_SYSTEM;
-      infop->ti_state = TD_THR_ACTIVE;
-    }
-  else
-    {
-      infop->ti_tid = pds.p_tid;
-      infop->ti_tls = (char *) pds.p_specific;
-      infop->ti_pri = pds.p_priority;
-      infop->ti_type = TD_THR_USER;
-      
-      if (! pds.p_terminated)
-	/* XXX For now there is no way to get more information.  */
-	infop->ti_state = TD_THR_ACTIVE;
-      else if (! pds.p_detached)
-	infop->ti_state = TD_THR_ZOMBIE;
-      else
-	infop->ti_state = TD_THR_UNKNOWN;
-    }
-
-  /* Initialization which are the same in both cases.  */
-  infop->ti_lid = pds.p_pid ?: ps_getpid (th->th_ta_p->ph);
-  infop->ti_ta_p = th->th_ta_p;
-  infop->ti_startfunc = pds.p_start_args.start_routine;
-  memcpy (&infop->ti_events, &pds.p_eventbuf.eventmask,
-	  sizeof (td_thr_events_t));
-  infop->ti_traceme = pds.p_report_events != 0;
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_getfpregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_getfpregs.c
deleted file mode 100644
index b453cc0e9..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_getfpregs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Get a thread's floating-point register set.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_getfpregs (const td_thrhandle_t *th, prfpregset_t *regset)
-{
-  struct _pthread_descr_struct pds;
-
-  LOG ("td_thr_getfpregs");
-
-  /* We have to get the state and the PID for this thread.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-		 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;
-
-  /* If the thread already terminated we return all zeroes.  */
-  if (pds.p_terminated)
-    memset (regset, '\0', sizeof (*regset));
-  /* Otherwise get the register content through the callback.  */
-  else
-    {
-      pid_t pid = pds.p_pid ?: ps_getpid (th->th_ta_p->ph);
-
-      if (ps_lgetfpregs (th->th_ta_p->ph, pid, regset) != PS_OK)
-	return TD_ERR;
-    }
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_getgregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_getgregs.c
deleted file mode 100644
index 462a1a192..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_getgregs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Get a thread's general register set.
-   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_getgregs (const td_thrhandle_t *th, prgregset_t gregs)
-{
-  struct _pthread_descr_struct pds;
-
-  LOG ("td_thr_getgregs");
-
-  /* We have to get the state and the PID for this thread.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-		 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;
-
-  /* If the thread already terminated we return all zeroes.  */
-  if (pds.p_terminated)
-    memset (gregs, '\0', sizeof (prgregset_t));
-  /* Otherwise get the register content through the callback.  */
-  else
-    {
-      pid_t pid = pds.p_pid ?: ps_getpid (th->th_ta_p->ph);
-
-      if (ps_lgetregs (th->th_ta_p->ph, pid, gregs) != PS_OK)
-	return TD_ERR;
-    }
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_getxregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_getxregs.c
deleted file mode 100644
index a5194568c..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_getxregs.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Get a thread's extra state register set.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_getxregs (const td_thrhandle_t *th, void *xregs)
-{
-  /* XXX This might be platform specific.  */
-  LOG ("td_thr_getxregs");
-  return TD_NOXREGS;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_getxregsize.c b/newlib/libc/sys/linux/linuxthreads/td_thr_getxregsize.c
deleted file mode 100644
index ddf8cbbe6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_getxregsize.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Get the size of the extra state register set for this architecture.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_getxregsize (const td_thrhandle_t *th, int *sizep)
-{
-  /* XXX This might be platform specific.  */
-  LOG ("td_thr_getxregsize");
-  return TD_NOXREGS;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_set_event.c b/newlib/libc/sys/linux/linuxthreads/td_thr_set_event.c
deleted file mode 100644
index 6171155b6..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_set_event.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Enable specific event for thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_set_event (th, event)
-     const td_thrhandle_t *th;
-     td_thr_events_t *event;
-{
-  td_thr_events_t old_event;
-  int i;
-
-  LOG ("td_thr_set_event");
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdread (th->th_ta_p->ph,
-		 ((char *) th->th_unique
-		  + offsetof (struct _pthread_descr_struct,
-			      p_eventbuf.eventmask)),
-		 &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Or the new bits in.  */
-  for (i = 0; i < TD_EVENTSIZE; ++i)
-    old_event.event_bits[i] |= event->event_bits[i];
-
-  /* Write the new value into the thread data structure.  */
-  if (ps_pdwrite (th->th_ta_p->ph,
-		  ((char *) th->th_unique
-		   + offsetof (struct _pthread_descr_struct,
-			       p_eventbuf.eventmask)),
-		  &old_event, sizeof (td_thrhandle_t)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_setfpregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_setfpregs.c
deleted file mode 100644
index 0d4fce540..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_setfpregs.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Set a thread's floating-point register set.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_setfpregs (const td_thrhandle_t *th, const prfpregset_t *fpregs)
-{
-  struct _pthread_descr_struct pds;
-
-  LOG ("td_thr_setfpregs");
-
-  /* We have to get the state and the PID for this thread.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-                 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;
-
-  /* Only set the registers if the thread hasn't yet terminated.  */
-  if (pds.p_terminated == 0)
-    {
-      pid_t pid = pds.p_pid ?: ps_getpid (th->th_ta_p->ph);
-
-      if (ps_lsetfpregs (th->th_ta_p->ph, pid, fpregs) != PS_OK)
-	return TD_ERR;
-    }
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_setgregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_setgregs.c
deleted file mode 100644
index 3cf653956..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_setgregs.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Set a thread's general register set.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_setgregs (const td_thrhandle_t *th, prgregset_t gregs)
-{
-  struct _pthread_descr_struct pds;
-
-  LOG ("td_thr_setgregs");
-
-  /* We have to get the state and the PID for this thread.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-                 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;
-
-  /* Only set the registers if the thread hasn't yet terminated.  */
-  if (pds.p_terminated == 0)
-    {
-      pid_t pid = pds.p_pid ?: ps_getpid (th->th_ta_p->ph);
-
-      if (ps_lsetregs (th->th_ta_p->ph, pid, gregs) != PS_OK)
-	return TD_ERR;
-    }
-
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_setprio.c b/newlib/libc/sys/linux/linuxthreads/td_thr_setprio.c
deleted file mode 100644
index 01eab4811..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_setprio.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Set a thread's priority.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_setprio (const td_thrhandle_t *th, int prio)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_thr_setprio");
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_setsigpending.c b/newlib/libc/sys/linux/linuxthreads/td_thr_setsigpending.c
deleted file mode 100644
index 6ecd74787..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_setsigpending.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Raise a signal for a thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_setsigpending (const td_thrhandle_t *th, unsigned char n,
-		      const sigset_t *ss)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_thr_setsigpending");
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_setxregs.c b/newlib/libc/sys/linux/linuxthreads/td_thr_setxregs.c
deleted file mode 100644
index 15ea14a66..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_setxregs.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Set a thread's extra state register set.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_setxregs (const td_thrhandle_t *ta, const void *addr)
-{
-  /* XXX This might have to be platform specific.  */
-  LOG ("td_thr_setxregs");
-  return TD_NOXREGS;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_sigsetmask.c b/newlib/libc/sys/linux/linuxthreads/td_thr_sigsetmask.c
deleted file mode 100644
index 79f144328..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_sigsetmask.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Set a thread's signal mask.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_sigsetmask (const td_thrhandle_t *th, const sigset_t *ss)
-{
-  /* XXX We have to figure out what has to be done.  */
-  LOG ("td_thr_sigsetmask");
-  return TD_OK;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_tsd.c b/newlib/libc/sys/linux/linuxthreads/td_thr_tsd.c
deleted file mode 100644
index 192b42571..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_tsd.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Get a thread-specific data pointer for a thread.
-   Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_tsd (const td_thrhandle_t *th, const thread_key_t tk, void **data)
-{
-  struct _pthread_descr_struct pds;
-  struct pthread_key_struct *keys = th->th_ta_p->keys;
-  struct pthread_key_struct key;
-  int pthread_keys_max = th->th_ta_p->pthread_keys_max;
-  int pthread_key_2ndlevel_size = th->th_ta_p->pthread_key_2ndlevel_size;
-  unsigned int idx1st;
-  unsigned int idx2nd;
-  void *p;
-
-  LOG ("td_thr_tsd");
-
-  /* Get the thread descriptor.  */
-  if (ps_pdread (th->th_ta_p->ph, th->th_unique, &pds,
-		 sizeof (struct _pthread_descr_struct)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Check correct value of key.  */
-  if (tk >= pthread_keys_max)
-    return TD_BADKEY;
-
-  /* Get the key entry.  */
-  if (ps_pdread (th->th_ta_p->ph, keys, &key,
-		 sizeof (struct pthread_key_struct)) != PS_OK)
-    return TD_ERR;	/* XXX Other error value?  */
-
-  /* Fail if this key is not at all used.  */
-  if (! key.in_use)
-    return TD_BADKEY;
-
-  /* Compute the indeces.  */
-  idx1st = tk / pthread_key_2ndlevel_size;
-  idx2nd = tk % pthread_key_2ndlevel_size;
-
-  /* Check the pointer to the second level array.  */
-  if (pds.p_specific[idx1st] == NULL)
-    return TD_NOTSD;
-
-  /* Now get the real key.
-     XXX I don't know whether it's correct but there is currently no
-     easy way to determine whether a key was never set or the value
-     is NULL.  We return an error whenever the value is NULL.  */
-  if (ps_pdread (th->th_ta_p->ph, &pds.p_specific[idx1st][idx2nd], &p,
-		 sizeof (void *)) != PS_OK)
-    return TD_ERR;
-
-  if (p != NULL)
-    *data = p;
-
-  return p != NULL ? TD_OK : TD_NOTSD;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/td_thr_validate.c b/newlib/libc/sys/linux/linuxthreads/td_thr_validate.c
deleted file mode 100644
index 8821f0e84..000000000
--- a/newlib/libc/sys/linux/linuxthreads/td_thr_validate.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Validate a thread handle.
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1999.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "thread_dbP.h"
-
-
-td_err_e
-td_thr_validate (const td_thrhandle_t *th)
-{
-  struct pthread_handle_struct *handles = th->th_ta_p->handles;
-  int pthread_threads_max = th->th_ta_p->pthread_threads_max;
-  int cnt;
-
-  LOG ("td_thr_validate");
-
-  /* Now get all descriptors, one after the other.  */
-  for (cnt = 0; cnt < pthread_threads_max; ++cnt, ++handles)
-    {
-      struct pthread_handle_struct phc;
-
-      if (ps_pdread (th->th_ta_p->ph, handles, &phc,
-		     sizeof (struct pthread_handle_struct)) != PS_OK)
-	return TD_ERR;	/* XXX Other error value?  */
-
-      if (phc.h_descr != NULL && phc.h_descr == th->th_unique)
-	{
-	  struct _pthread_descr_struct pds;
-
-	  if (ps_pdread (th->th_ta_p->ph, phc.h_descr, &pds,
-			 th->th_ta_p->sizeof_descr) != PS_OK)
-	    return TD_ERR;	/* XXX Other error value?  */
-
-	  /* XXX There should be another test using the TID but this is
-	     currently not available.  */
-	  return pds.p_terminated != 0 ? TD_NOTHR : TD_OK;
-	}
-    }
-
-  return TD_ERR;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/testrtsig.h b/newlib/libc/sys/linux/linuxthreads/testrtsig.h
deleted file mode 100644
index cf36ab08a..000000000
--- a/newlib/libc/sys/linux/linuxthreads/testrtsig.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Test whether RT signals are really available.
-   Copyright (C) 1997, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <string.h>
-#include <sys/utsname.h>
-
-#include "kernel-features.h"
-
-static int
-kernel_has_rtsig (void)
-{
-#if __ASSUME_REALTIME_SIGNALS
-  return 1;
-#else
-  struct utsname name;
-
-  return uname (&name) == 0 && __strverscmp (name.release, "2.1.70") >= 0;
-#endif
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/thread_db.h b/newlib/libc/sys/linux/linuxthreads/thread_db.h
deleted file mode 100644
index b192d1f2e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/thread_db.h
+++ /dev/null
@@ -1,439 +0,0 @@
-/* Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _THREAD_DB_H
-#define _THREAD_DB_H	1
-
-/* This is the debugger interface for the LinuxThreads library.  It is
-   modelled closely after the interface with same names in Solaris with
-   the goal to share the same code in the debugger.  */
-#include <pthread.h>
-#include <stdint.h>
-#include <sys/types.h>
-#include <sys/procfs.h>
-
-
-/* Error codes of the library.  */
-typedef enum
-{
-  TD_OK,	  /* No error.  */
-  TD_ERR,	  /* No further specified error.  */
-  TD_NOTHR,	  /* No matching thread found.  */
-  TD_NOSV,	  /* No matching synchronization handle found.  */
-  TD_NOLWP,	  /* No matching light-weighted process found.  */
-  TD_BADPH,	  /* Invalid process handle.  */
-  TD_BADTH,	  /* Invalid thread handle.  */
-  TD_BADSH,	  /* Invalid synchronization handle.  */
-  TD_BADTA,	  /* Invalid thread agent.  */
-  TD_BADKEY,	  /* Invalid key.  */
-  TD_NOMSG,	  /* No event available.  */
-  TD_NOFPREGS,	  /* No floating-point register content available.  */
-  TD_NOLIBTHREAD, /* Application not linked with thread library.  */
-  TD_NOEVENT,	  /* Requested event is not supported.  */
-  TD_NOCAPAB,	  /* Capability not available.  */
-  TD_DBERR,	  /* Internal debug library error.  */
-  TD_NOAPLIC,	  /* Operation is not applicable.  */
-  TD_NOTSD,	  /* No thread-specific data available.  */
-  TD_MALLOC,	  /* Out of memory.  */
-  TD_PARTIALREG,  /* Not entire register set was read or written.  */
-  TD_NOXREGS	  /* X register set not available for given thread.  */
-} td_err_e;
-
-
-/* Possible thread states.  TD_THR_ANY_STATE is a pseudo-state used to
-   select threads regardless of state in td_ta_thr_iter().  */
-typedef enum
-{
-  TD_THR_ANY_STATE,
-  TD_THR_UNKNOWN,
-  TD_THR_STOPPED,
-  TD_THR_RUN,
-  TD_THR_ACTIVE,
-  TD_THR_ZOMBIE,
-  TD_THR_SLEEP,
-  TD_THR_STOPPED_ASLEEP
-} td_thr_state_e;
-
-/* Thread type: user or system.  TD_THR_ANY_TYPE is a pseudo-type used
-   to select threads regardless of type in td_ta_thr_iter().  */
-typedef enum
-{
-  TD_THR_ANY_TYPE,
-  TD_THR_USER,
-  TD_THR_SYSTEM
-} td_thr_type_e;
-
-
-/* Types of the debugging library.  */
-
-/* Handle for a process.  This type is opaque.  */
-typedef struct td_thragent td_thragent_t;
-
-/* The actual thread handle type.  This is also opaque.  */
-typedef struct td_thrhandle
-{
-  td_thragent_t *th_ta_p;
-  psaddr_t th_unique;
-} td_thrhandle_t;
-
-
-/* Flags for `td_ta_thr_iter'.  */
-#define TD_THR_ANY_USER_FLAGS	0xffffffff
-#define TD_THR_LOWEST_PRIORITY	-20
-#define TD_SIGNO_MASK		NULL
-
-
-#define TD_EVENTSIZE	2
-#define BT_UISHIFT	5 /* log base 2 of BT_NBIPUI, to extract word index */
-#define BT_NBIPUI	(1 << BT_UISHIFT)       /* n bits per uint */
-#define BT_UIMASK	(BT_NBIPUI - 1)         /* to extract bit index */
-
-/* Bitmask of enabled events. */
-typedef struct td_thr_events
-{
-  uint32_t event_bits[TD_EVENTSIZE];
-} td_thr_events_t;
-
-/* Event set manipulation macros. */
-#define __td_eventmask(n) \
-  (UINT32_C (1) << (((n) - 1) & BT_UIMASK))
-#define __td_eventword(n) \
-  ((UINT32_C ((n) - 1)) >> BT_UISHIFT)
-
-#define td_event_emptyset(setp) \
-  do {									      \
-    int __i;								      \
-    for (__i = TD_EVENTSIZE; __i > 0; --__i)				      \
-      (setp)->event_bits[__i - 1] = 0;					      \
-  } while (0)
-
-#define td_event_fillset(setp) \
-  do {									      \
-    int __i;								      \
-    for (__i = TD_EVENTSIZE; __i > 0; --__i)				      \
-      (setp)->event_bits[__i - 1] = UINT32_C (0xffffffff);		      \
-  } while (0)
-
-#define td_event_addset(setp, n) \
-  (((setp)->event_bits[__td_eventword (n)]) |= __td_eventmask (n))
-#define td_event_delset(setp, n) \
-  (((setp)->event_bits[__td_eventword (n)]) &= ~__td_eventmask (n))
-#define td_eventismember(setp, n) \
-  (__td_eventmask (n) & ((setp)->event_bits[__td_eventword (n)]))
-#if TD_EVENTSIZE == 2
-# define td_eventisempty(setp) \
-  (!((setp)->event_bits[0]) && !((setp)->event_bits[1]))
-#else
-# error "td_eventisempty must be changed to match TD_EVENTSIZE"
-#endif
-
-/* Events reportable by the thread implementation.  */
-typedef enum
-{
-  TD_ALL_EVENTS,		 /* Pseudo-event number.  */
-  TD_EVENT_NONE = TD_ALL_EVENTS, /* Depends on context.  */
-  TD_READY,			 /* Is executable now. */
-  TD_SLEEP,			 /* Blocked in a synchronization obj.  */
-  TD_SWITCHTO,			 /* Now assigned to a process.  */
-  TD_SWITCHFROM,		 /* Not anymore assigned to a process.  */
-  TD_LOCK_TRY,			 /* Trying to get an unavailable lock.  */
-  TD_CATCHSIG,			 /* Signal posted to the thread.  */
-  TD_IDLE,			 /* Process getting idle.  */
-  TD_CREATE,			 /* New thread created.  */
-  TD_DEATH,			 /* Thread terminated.  */
-  TD_PREEMPT,			 /* Preempted.  */
-  TD_PRI_INHERIT,		 /* Inherited elevated priority.  */
-  TD_REAP,			 /* Reaped.  */
-  TD_CONCURRENCY,		 /* Number of processes changing.  */
-  TD_TIMEOUT,			 /* Conditional variable wait timed out.  */
-  TD_MIN_EVENT_NUM = TD_READY,
-  TD_MAX_EVENT_NUM = TD_TIMEOUT,
-  TD_EVENTS_ENABLE = 31		/* Event reporting enabled.  */
-} td_event_e;
-
-/* Values representing the different ways events are reported.  */
-typedef enum
-{
-  NOTIFY_BPT,			/* User must insert breakpoint at u.bptaddr. */
-  NOTIFY_AUTOBPT,		/* Breakpoint at u.bptaddr is automatically
-				   inserted.  */
-  NOTIFY_SYSCALL		/* System call u.syscallno will be invoked.  */
-} td_notify_e;
-
-/* Description how event type is reported.  */
-typedef struct td_notify
-{
-  td_notify_e type;		/* Way the event is reported.  */
-  union
-  {
-    psaddr_t bptaddr;		/* Address of breakpoint.  */
-    int syscallno;		/* Number of system call used.  */
-  } u;
-} td_notify_t;
-
-/* Structure used to report event.  */
-typedef struct td_event_msg
-{
-  td_event_e event;		/* Event type being reported.  */
-  const td_thrhandle_t *th_p;	/* Thread reporting the event.  */
-  union
-  {
-# if 0
-    td_synchandle_t *sh;	/* Handle of synchronization object.  */
-#endif
-    uintptr_t data;		/* Event specific data.  */
-  } msg;
-} td_event_msg_t;
-
-/* Structure containing event data available in each thread structure.  */
-typedef struct
-{
-  td_thr_events_t eventmask;	/* Mask of enabled events.  */
-  td_event_e eventnum;		/* Number of last event.  */
-  void *eventdata;		/* Data associated with event.  */
-} td_eventbuf_t;
-
-
-/* Gathered statistics about the process.  */
-typedef struct td_ta_stats
-{
-  int nthreads;       		/* Total number of threads in use.  */
-  int r_concurrency;		/* Concurrency level requested by user.  */
-  int nrunnable_num;		/* Average runnable threads, numerator.  */
-  int nrunnable_den;		/* Average runnable threads, denominator.  */
-  int a_concurrency_num;	/* Achieved concurrency level, numerator.  */
-  int a_concurrency_den;	/* Achieved concurrency level, denominator.  */
-  int nlwps_num;		/* Average number of processes in use,
-				   numerator.  */
-  int nlwps_den;		/* Average number of processes in use,
-				   denominator.  */
-  int nidle_num;		/* Average number of idling processes,
-				   numerator.  */
-  int nidle_den;		/* Average number of idling processes,
-				   denominator.  */
-} td_ta_stats_t;
-
-
-/* Since Sun's library is based on Solaris threads we have to define a few
-   types to map them to POSIX threads.  */
-typedef pthread_t thread_t;
-typedef pthread_key_t thread_key_t;
-
-
-/* Callback for iteration over threads.  */
-typedef int td_thr_iter_f (const td_thrhandle_t *, void *);
-
-/* Callback for iteration over thread local data.  */
-typedef int td_key_iter_f (thread_key_t, void (*) (void *), void *);
-
-
-
-/* Forward declaration.  This has to be defined by the user.  */
-struct ps_prochandle;
-
-
-/* Information about the thread.  */
-typedef struct td_thrinfo
-{
-  td_thragent_t *ti_ta_p;		/* Process handle.  */
-  unsigned int ti_user_flags;		/* Unused.  */
-  thread_t ti_tid;			/* Thread ID returned by
-					   pthread_create().  */
-  char *ti_tls;				/* Pointer to thread-local data.  */
-  psaddr_t ti_startfunc;		/* Start function passed to
-					   pthread_create().  */
-  psaddr_t ti_stkbase;			/* Base of thread's stack.  */
-  long int ti_stksize;			/* Size of thread's stack.  */
-  psaddr_t ti_ro_area;			/* Unused.  */
-  int ti_ro_size;			/* Unused.  */
-  td_thr_state_e ti_state;		/* Thread state.  */
-  unsigned char ti_db_suspended;	/* Nonzero if suspended by debugger. */
-  td_thr_type_e ti_type;		/* Type of the thread (system vs
-					   user thread).  */
-  intptr_t ti_pc;			/* Unused.  */
-  intptr_t ti_sp;			/* Unused.  */
-  short int ti_flags;			/* Unused.  */
-  int ti_pri;				/* Thread priority.  */
-  lwpid_t ti_lid;			/* Unused.  */
-  sigset_t ti_sigmask;			/* Signal mask.  */
-  unsigned char ti_traceme;		/* Nonzero if event reporting
-					   enabled.  */
-  unsigned char ti_preemptflag;		/* Unused.  */
-  unsigned char ti_pirecflag;		/* Unused.  */
-  sigset_t ti_pending;			/* Set of pending signals.  */
-  td_thr_events_t ti_events;		/* Set of enabled events.  */
-} td_thrinfo_t;
-
-
-
-/* Prototypes for exported library functions.  */
-
-/* Initialize the thread debug support library.  */
-extern td_err_e td_init (void);
-
-/* Historical relict.  Should not be used anymore.  */
-extern td_err_e td_log (void);
-
-/* Return list of symbols the library can request.  */
-extern const char **td_symbol_list (void);
-
-/* Generate new thread debug library handle for process PS.  */
-extern td_err_e td_ta_new (struct ps_prochandle *__ps, td_thragent_t **__ta);
-
-/* Free resources allocated for TA.  */
-extern td_err_e td_ta_delete (td_thragent_t *__ta);
-
-/* Get number of currently running threads in process associated with TA.  */
-extern td_err_e td_ta_get_nthreads (const td_thragent_t *__ta, int *__np);
-
-/* Return process handle passed in `td_ta_new' for process associated with
-   TA.  */
-extern td_err_e td_ta_get_ph (const td_thragent_t *__ta,
-			      struct ps_prochandle **__ph);
-
-/* Map thread library handle PT to thread debug library handle for process
-   associated with TA and store result in *TH.  */
-extern td_err_e td_ta_map_id2thr (const td_thragent_t *__ta, pthread_t __pt,
-				  td_thrhandle_t *__th);
-
-/* Map process ID LWPID to thread debug library handle for process
-   associated with TA and store result in *TH.  */
-extern td_err_e td_ta_map_lwp2thr (const td_thragent_t *__ta, lwpid_t __lwpid,
-				   td_thrhandle_t *__th);
-
-
-/* Call for each thread in a process associated with TA the callback function
-   CALLBACK.  */
-extern td_err_e td_ta_thr_iter (const td_thragent_t *__ta,
-				td_thr_iter_f *__callback, void *__cbdata_p,
-				td_thr_state_e __state, int __ti_pri,
-				sigset_t *__ti_sigmask_p,
-				unsigned int __ti_user_flags);
-
-/* Call for each defined thread local data entry the callback function KI.  */
-extern td_err_e td_ta_tsd_iter (const td_thragent_t *__ta, td_key_iter_f *__ki,
-				void *__p);
-
-
-/* Get event address for EVENT.  */
-extern td_err_e td_ta_event_addr (const td_thragent_t *__ta,
-				  td_event_e __event, td_notify_t *__ptr);
-
-/* Enable EVENT in global mask.  */
-extern td_err_e td_ta_set_event (const td_thragent_t *__ta,
-				 td_thr_events_t *__event);
-
-/* Disable EVENT in global mask.  */
-extern td_err_e td_ta_clear_event (const td_thragent_t *__ta,
-				   td_thr_events_t *__event);
-
-/* Return information about last event.  */
-extern td_err_e td_ta_event_getmsg (const td_thragent_t *__ta,
-				    td_event_msg_t *msg);
-
-
-/* Set suggested concurrency level for process associated with TA.  */
-extern td_err_e td_ta_setconcurrency (const td_thragent_t *__ta, int __level);
-
-
-/* Enable collecting statistics for process associated with TA.  */
-extern td_err_e td_ta_enable_stats (const td_thragent_t *__ta, int __enable);
-
-/* Reset statistics.  */
-extern td_err_e td_ta_reset_stats (const td_thragent_t *__ta);
-
-/* Retrieve statistics from process associated with TA.  */
-extern td_err_e td_ta_get_stats (const td_thragent_t *__ta,
-				 td_ta_stats_t *__statsp);
-
-
-/* Validate that TH is a thread handle.  */
-extern td_err_e td_thr_validate (const td_thrhandle_t *__th);
-
-/* Return information about thread TH.  */
-extern td_err_e td_thr_get_info (const td_thrhandle_t *__th,
-				 td_thrinfo_t *__infop);
-
-/* Retrieve floating-point register contents of process running thread TH.  */
-extern td_err_e td_thr_getfpregs (const td_thrhandle_t *__th,
-				  prfpregset_t *__regset);
-
-/* Retrieve general register contents of process running thread TH.  */
-extern td_err_e td_thr_getgregs (const td_thrhandle_t *__th,
-				 prgregset_t __gregs);
-
-/* Retrieve extended register contents of process running thread TH.  */
-extern td_err_e td_thr_getxregs (const td_thrhandle_t *__th, void *__xregs);
-
-/* Get size of extended register set of process running thread TH.  */
-extern td_err_e td_thr_getxregsize (const td_thrhandle_t *__th, int *__sizep);
-
-/* Set floating-point register contents of process running thread TH.  */
-extern td_err_e td_thr_setfpregs (const td_thrhandle_t *__th,
-				  const prfpregset_t *__fpregs);
-
-/* Set general register contents of process running thread TH.  */
-extern td_err_e td_thr_setgregs (const td_thrhandle_t *__th,
-				 prgregset_t __gregs);
-
-/* Set extended register contents of process running thread TH.  */
-extern td_err_e td_thr_setxregs (const td_thrhandle_t *__th,
-				 const void *__addr);
-
-
-/* Enable reporting for EVENT for thread TH.  */
-extern td_err_e td_thr_event_enable (const td_thrhandle_t *__th, int __event);
-
-/* Enable EVENT for thread TH.  */
-extern td_err_e td_thr_set_event (const td_thrhandle_t *__th,
-				  td_thr_events_t *__event);
-
-/* Disable EVENT for thread TH.  */
-extern td_err_e td_thr_clear_event (const td_thrhandle_t *__th,
-				    td_thr_events_t *__event);
-
-/* Get event message for thread TH.  */
-extern td_err_e td_thr_event_getmsg (const td_thrhandle_t *__th,
-				     td_event_msg_t *__msg);
-
-
-/* Set priority of thread TH.  */
-extern td_err_e td_thr_setprio (const td_thrhandle_t *__th, int __prio);
-
-
-/* Set pending signals for thread TH.  */
-extern td_err_e td_thr_setsigpending (const td_thrhandle_t *__th,
-				      unsigned char __n, const sigset_t *__ss);
-
-/* Set signal mask for thread TH.  */
-extern td_err_e td_thr_sigsetmask (const td_thrhandle_t *__th,
-				   const sigset_t *__ss);
-
-
-/* Return thread local data associated with key TK in thread TH.  */
-extern td_err_e td_thr_tsd (const td_thrhandle_t *__th,
-			    const thread_key_t __tk, void **__data);
-
-
-/* Suspend execution of thread TH.  */
-extern td_err_e td_thr_dbsuspend (const td_thrhandle_t *__th);
-
-/* Resume execution of thread TH.  */
-extern td_err_e td_thr_dbresume (const td_thrhandle_t *__th);
-
-#endif	/* thread_db.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/thread_dbP.h b/newlib/libc/sys/linux/linuxthreads/thread_dbP.h
deleted file mode 100644
index c695fa253..000000000
--- a/newlib/libc/sys/linux/linuxthreads/thread_dbP.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* Private header for thread debug library.  */
-#ifndef _THREAD_DBP_H
-#define _THREAD_DBP_H	1
-
-#include <string.h>
-#include "proc_service.h"
-#include "thread_db.h"
-#include "internals.h"
-
-
-/* Indeces for the symbol names.  */
-enum
-  {
-    PTHREAD_THREADS_EVENTS = 0,
-    PTHREAD_LAST_EVENT,
-    PTHREAD_HANDLES_NUM,
-    PTHREAD_HANDLES,
-    PTHREAD_KEYS,
-    LINUXTHREADS_PTHREAD_THREADS_MAX,
-    LINUXTHREADS_PTHREAD_KEYS_MAX,
-    LINUXTHREADS_PTHREAD_SIZEOF_DESCR,
-    LINUXTHREADS_CREATE_EVENT,
-    LINUXTHREADS_DEATH_EVENT,
-    LINUXTHREADS_REAP_EVENT,
-    NUM_MESSAGES
-  };
-
-
-/* Comment out the following for less verbose output.  */
-#ifndef NDEBUG
-# define LOG(c) if (__td_debug) __libc_write (2, c "\n", strlen (c "\n"))
-extern int __td_debug;
-#else
-# define LOG(c)
-#endif
-
-
-/* Handle for a process.  This type is opaque.  */
-struct td_thragent
-{
-  /* Delivered by the debugger and we have to pass it back in the
-     proc callbacks.  */
-  struct ps_prochandle *ph;
-
-  /* Some cached information.  */
-
-  /* Address of the `__pthread_handles' array.  */
-  struct pthread_handle_struct *handles;
-
-  /* Address of the `pthread_kyes' array.  */
-  struct pthread_key_struct *keys;
-
-  /* Maximum number of threads.  */
-  int pthread_threads_max;
-
-  /* Maximum number of thread-local data keys.  */
-  int pthread_keys_max;
-
-  /* Size of 2nd level array for thread-local data keys.  */
-  int pthread_key_2ndlevel_size;
-
-  /* Sizeof struct _pthread_descr_struct.  */
-  int sizeof_descr;
-
-  /* Pointer to the `__pthread_threads_events' variable in the target.  */
-  psaddr_t pthread_threads_eventsp;
-
-  /* Pointer to the `__pthread_last_event' variable in the target.  */
-  psaddr_t pthread_last_event;
-
-  /* Pointer to the `__pthread_handles_num' variable.  */
-  psaddr_t pthread_handles_num;
-};
-
-
-/* Type used internally to keep track of thread agent descriptors.  */
-struct agent_list
-{
-  td_thragent_t *ta;
-  struct agent_list *next;
-};
-
-/* List of all known descriptors.  */
-extern struct agent_list *__td_agent_list;
-
-/* Function used to test for correct thread agent pointer.  */
-static inline int
-ta_ok (const td_thragent_t *ta)
-{
-  struct agent_list *runp = __td_agent_list;
-
-  if (ta == NULL)
-    return 0;
-
-  while (runp != NULL && runp->ta != ta)
-    runp = runp->next;
-
-  return runp != NULL;
-}
-
-
-/* Internal wrapper around ps_pglobal_lookup.  */
-extern int td_lookup (struct ps_prochandle *ps, int idx, psaddr_t *sym_addr);
-
-#endif /* thread_dbP.h */
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_create.c b/newlib/libc/sys/linux/linuxthreads/timer_create.c
deleted file mode 100644
index 1dccd3036..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_create.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <signal.h>
-#include <pthread.h>
-#include <time.h>
-#include <unistd.h>
-
-#include "posix-timer.h"
-
-
-/* Create new per-process timer using CLOCK.  */
-int
-timer_create (clock_id, evp, timerid)
-     clockid_t clock_id;
-     struct sigevent *evp;
-     timer_t *timerid;
-{
-  int retval = -1;
-  struct timer_node *newtimer = NULL;
-  struct thread_node *thread = NULL;
-
-  if (clock_id != CLOCK_REALTIME
-#ifdef _POSIX_CPUTIME
-      && clock_id != CLOCK_PROCESS_CPUTIME_ID
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-      && clock_id != CLOCK_THREAD_CPUTIME_ID
-#endif
-      )
-    {
-      __set_errno (EINVAL);
-      return -1;
-    }
-
-  pthread_once (&__timer_init_once_control, __timer_init_once);
-
-  if (__timer_init_failed)
-    {
-      __set_errno (ENOMEM);
-      return -1;
-    }
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  newtimer = __timer_alloc ();
-  if (__builtin_expect (newtimer == NULL, 0))
-    {
-      __set_errno (EAGAIN);
-      goto unlock_bail;
-    }
-
-  if (evp != NULL)
-    newtimer->event = *evp;
-  else
-    {
-      newtimer->event.sigev_notify = SIGEV_SIGNAL;
-      newtimer->event.sigev_signo = SIGALRM;
-      newtimer->event.sigev_value.sival_int = timer_ptr2id (newtimer);
-      newtimer->event.sigev_notify_function = 0;
-    }
-
-  newtimer->event.sigev_notify_attributes = &newtimer->attr;
-  newtimer->creator_pid = getpid ();
-
-  switch (__builtin_expect (newtimer->event.sigev_notify, SIGEV_SIGNAL))
-    {
-    case SIGEV_NONE:
-      /* This is a strange choice!  */
-      break;
-
-    case SIGEV_SIGNAL:
-      /* We have a global thread for delivering timed signals.
-	 If it is not running, try to start it up.  */
-      switch (clock_id)
-	{
-	case CLOCK_REALTIME:
-	default:
-	  thread = &__timer_signal_thread_rclk;
-	  break;
-#ifdef _POSIX_CPUTIME
-	case CLOCK_PROCESS_CPUTIME_ID:
-	  thread = &__timer_signal_thread_pclk;
-	  break;
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-	case CLOCK_THREAD_CPUTIME_ID:
-	  thread = &__timer_signal_thread_tclk;
-	  break;
-#endif
-	}
-
-      if (! thread->exists)
-	{
-	  if (__builtin_expect (__timer_thread_start (thread),
-				1) < 0)
-	    {
-	      __set_errno (EAGAIN);
-	      goto unlock_bail;
-            }
-        }
-      break;
-
-    case SIGEV_THREAD:
-      /* Copy over thread attributes or set up default ones.  */
-      if (evp->sigev_notify_attributes)
-	newtimer->attr = *(pthread_attr_t *) evp->sigev_notify_attributes;
-      else
-	pthread_attr_init (&newtimer->attr);
-
-      /* Ensure thread attributes call for deatched thread.  */
-      pthread_attr_setdetachstate (&newtimer->attr, PTHREAD_CREATE_DETACHED);
-
-      /* Try to find existing thread having the right attributes.  */
-      thread = __timer_thread_find_matching (&newtimer->attr, clock_id);
-
-      /* If no existing thread has these attributes, try to allocate one.  */
-      if (thread == NULL)
-	thread = __timer_thread_alloc (&newtimer->attr, clock_id);
-
-      /* Out of luck; no threads are available.  */
-      if (__builtin_expect (thread == NULL, 0))
-	{
-	  __set_errno (EAGAIN);
-	  goto unlock_bail;
-	}
-
-      /* If the thread is not running already, try to start it.  */
-      if (! thread->exists
-	  && __builtin_expect (! __timer_thread_start (thread), 0))
-	{
-	  __set_errno (EAGAIN);
-	  goto unlock_bail;
-	}
-      break;
-
-    default:
-      __set_errno (EINVAL);
-      goto unlock_bail;
-    }
-
-  newtimer->clock = clock_id;
-  newtimer->abstime = 0;
-  newtimer->armed = 0;
-  newtimer->thread = thread;
-
-  *timerid = timer_ptr2id (newtimer);
-  retval = 0;
-
-  if (__builtin_expect (retval, 0) == -1)
-    {
-    unlock_bail:
-      if (thread != NULL)
-	__timer_thread_dealloc (thread);
-      if (newtimer != NULL)
-	__timer_dealloc (newtimer);
-    }
-
-  pthread_mutex_unlock (&__timer_mutex);
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_delete.c b/newlib/libc/sys/linux/linuxthreads/timer_delete.c
deleted file mode 100644
index 24f4ffed3..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_delete.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <assert.h>
-#include <errno.h>
-#include <pthread.h>
-#include <time.h>
-
-#include "posix-timer.h"
-
-
-/* Delete timer TIMERID.  */
-int
-timer_delete (timerid)
-     timer_t timerid;
-{
-  struct timer_node *timer;
-  int retval = -1;
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  timer = timer_id2ptr (timerid);
-  if (! timer_valid (timer))
-    /* Invalid timer ID or the timer is not in use.  */
-    __set_errno (EINVAL);
-  else
-    {
-      if (timer->armed && timer->thread != NULL)
-	{
-	  struct thread_node *thread = timer->thread;
-	  assert (thread != NULL);
-
-	  /* If thread is cancelled while waiting for handler to terminate,
-	     the mutex is unlocked and timer_delete is aborted.  */
-	  pthread_cleanup_push (__timer_mutex_cancel_handler, &__timer_mutex);
-
-	  /* If timer is currently being serviced, wait for it to finish.  */
-	  while (thread->current_timer == timer)
-	    pthread_cond_wait (&thread->cond, &__timer_mutex);
-
-	  pthread_cleanup_pop (0);
-        }
-
-      /* Remove timer from whatever queue it may be on and deallocate it.  */
-      timer->inuse = TIMER_DELETED;
-      list_unlink_ip (&timer->links);
-      timer_delref (timer);
-      retval = 0;
-    }
-
-  pthread_mutex_unlock (&__timer_mutex);
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_getoverr.c b/newlib/libc/sys/linux/linuxthreads/timer_getoverr.c
deleted file mode 100644
index 204addc85..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_getoverr.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <time.h>
-
-#include "posix-timer.h"
-
-
-/* Get expiration overrun for timer TIMERID.  */
-int
-timer_getoverrun (timerid)
-     timer_t timerid;
-{
-  struct timer_node *timer;
-  int retval = -1;
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  if (! timer_valid (timer = timer_id2ptr (timerid)))
-    __set_errno (EINVAL);
-  else
-    retval = 0; /* TODO: overrun counting not supported */
-
-  pthread_mutex_unlock (&__timer_mutex);
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_gettime.c b/newlib/libc/sys/linux/linuxthreads/timer_gettime.c
deleted file mode 100644
index dbee9d915..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_gettime.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Copyright (C) 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <time.h>
-
-#include "posix-timer.h"
-
-
-/* Get current value of timer TIMERID and store it in VLAUE.  */
-int
-timer_gettime (timerid, value)
-     timer_t timerid;
-     struct itimerspec *value;
-{
-  struct timer_node *timer;
-  struct timespec now, expiry;
-  int retval = -1, armed = 0, valid;
-  clock_t clock = 0;
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  timer = timer_id2ptr (timerid);
-  valid = timer_valid (timer);
-
-  if (valid) {
-    armed = timer->armed;
-    expiry = timer->expirytime;
-    clock = timer->clock;
-    value->it_interval = timer->value.it_interval;
-  }
-
-  pthread_mutex_unlock (&__timer_mutex);
-
-  if (valid)
-    {
-      if (armed)
-	{
-	  clock_gettime (clock, &now);
-	  timespec_sub (&value->it_value, &expiry, &now);
-	}
-      else
-	{
-	  value->it_value.tv_sec = 0;
-	  value->it_value.tv_nsec = 0;
-	}
-
-      retval = 0;
-    }
-  else
-    __set_errno (EINVAL);
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_routines.c b/newlib/libc/sys/linux/linuxthreads/timer_routines.c
deleted file mode 100644
index 65dc5dca5..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_routines.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/* Helper code for POSIX timer implementation on LinuxThreads.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <assert.h>
-#include <errno.h>
-#include <pthread.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sysdep.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/syscall.h>
-
-#include "posix-timer.h"
-
-
-/* Number of threads used.  */
-#define THREAD_MAXNODES	16
-
-/* Array containing the descriptors for the used threads.  */
-static struct thread_node thread_array[THREAD_MAXNODES];
-
-/* Static array with the structures for all the timers.  */
-struct timer_node __timer_array[TIMER_MAX];
-
-/* Global lock to protect operation on the lists.  */
-pthread_mutex_t __timer_mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/* Variable to protext initialization.  */
-pthread_once_t __timer_init_once_control = PTHREAD_ONCE_INIT;
-
-/* Nonzero if initialization of timer implementation failed.  */
-int __timer_init_failed;
-
-/* Node for the thread used to deliver signals.  */
-struct thread_node __timer_signal_thread_rclk;
-#ifdef _POSIX_CPUTIME
-struct thread_node __timer_signal_thread_pclk;
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-struct thread_node __timer_signal_thread_tclk;
-#endif
-
-/* Lists to keep free and used timers and threads.  */
-struct list_links timer_free_list;
-struct list_links thread_free_list;
-struct list_links thread_active_list;
-
-
-#ifdef __NR_rt_sigqueueinfo
-extern int __syscall_rt_sigqueueinfo (int, int, siginfo_t *);
-#endif
-
-
-/* List handling functions.  */
-static inline void
-list_init (struct list_links *list)
-{
-  list->next = list->prev = list;
-}
-
-static inline void
-list_append (struct list_links *list, struct list_links *newp)
-{
-  newp->prev = list->prev;
-  newp->next = list;
-  list->prev->next = newp;
-  list->prev = newp;
-}
-
-static inline void
-list_insbefore (struct list_links *list, struct list_links *newp)
-{
-  list_append (list, newp);
-}
-
-/*
- * Like list_unlink_ip, except that calling it on a node that
- * is already unlinked is disastrous rather than a noop.
- */
-
-static inline void
-list_unlink (struct list_links *list)
-{
-  struct list_links *lnext = list->next, *lprev = list->prev;
-
-  lnext->prev = lprev;
-  lprev->next = lnext;
-}
-
-static inline struct list_links *
-list_first (struct list_links *list)
-{
-  return list->next;
-}
-
-static inline struct list_links *
-list_null (struct list_links *list)
-{
-  return list;
-}
-
-static inline struct list_links *
-list_next (struct list_links *list)
-{
-  return list->next;
-}
-
-static inline int
-list_isempty (struct list_links *list)
-{
-  return list->next == list;
-}
-
-
-/* Functions build on top of the list functions.  */
-static inline struct thread_node *
-thread_links2ptr (struct list_links *list)
-{
-  return (struct thread_node *) ((char *) list
-				 - offsetof (struct thread_node, links));
-}
-
-static inline struct timer_node *
-timer_links2ptr (struct list_links *list)
-{
-  return (struct timer_node *) ((char *) list
-				- offsetof (struct timer_node, links));
-}
-
-
-/* Initialize a newly allocated thread structure.  */
-static void
-thread_init (struct thread_node *thread, const pthread_attr_t *attr, clockid_t clock_id)
-{
-  if (attr != NULL)
-    thread->attr = *attr;
-  else
-    {
-      pthread_attr_init (&thread->attr);
-      pthread_attr_setdetachstate (&thread->attr, PTHREAD_CREATE_DETACHED);
-    }
-
-  thread->exists = 0;
-  list_init (&thread->timer_queue);
-  pthread_cond_init (&thread->cond, 0);
-  thread->current_timer = 0;
-  thread->captured = pthread_self ();
-  thread->clock_id = clock_id;
-}
-
-
-/* Initialize the global lists, and acquire global resources.  Error
-   reporting is done by storing a non-zero value to the global variable
-   timer_init_failed.  */
-static void
-init_module (void)
-{
-  int i;
-
-  list_init (&timer_free_list);
-  list_init (&thread_free_list);
-  list_init (&thread_active_list);
-
-  for (i = 0; i < TIMER_MAX; ++i)
-    {
-      list_append (&timer_free_list, &__timer_array[i].links);
-      __timer_array[i].inuse = TIMER_FREE;
-    }
-
-  for (i = 0; i < THREAD_MAXNODES; ++i)
-    list_append (&thread_free_list, &thread_array[i].links);
-
-  thread_init (&__timer_signal_thread_rclk, 0, CLOCK_REALTIME);
-#ifdef _POSIX_CPUTIME
-  thread_init (&__timer_signal_thread_pclk, 0, CLOCK_PROCESS_CPUTIME_ID);
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-  thread_init (&__timer_signal_thread_tclk, 0, CLOCK_THREAD_CPUTIME_ID);
-#endif
-}
-
-
-/* This is a handler executed in a child process after a fork()
-   occurs.  It reinitializes the module, resetting all of the data
-   structures to their initial state.  The mutex is initialized in
-   case it was locked in the parent process.  */
-static void
-reinit_after_fork (void)
-{
-  init_module ();
-  pthread_mutex_init (&__timer_mutex, 0);
-}
-
-
-/* Called once form pthread_once in timer_init. This initializes the
-   module and ensures that reinit_after_fork will be executed in any
-   child process.  */
-void
-__timer_init_once (void)
-{
-  init_module ();
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-  pthread_atfork (0, 0, reinit_after_fork);
-#endif
-}
-
-
-/* Deinitialize a thread that is about to be deallocated.  */
-static void
-thread_deinit (struct thread_node *thread)
-{
-  assert (list_isempty (&thread->timer_queue));
-  pthread_cond_destroy (&thread->cond);
-}
-
-
-/* Allocate a thread structure from the global free list.  Global
-   mutex lock must be held by caller.  The thread is moved to
-   the active list. */
-struct thread_node *
-__timer_thread_alloc (const pthread_attr_t *desired_attr, clockid_t clock_id)
-{
-  struct list_links *node = list_first (&thread_free_list);
-
-  if (node != list_null (&thread_free_list))
-    {
-      struct thread_node *thread = thread_links2ptr (node);
-      list_unlink (node);
-      thread_init (thread, desired_attr, clock_id);
-      list_append (&thread_active_list, node);
-      return thread;
-    }
-
-  return 0;
-}
-
-
-/* Return a thread structure to the global free list.  Global lock
-   must be held by caller.  */
-void
-__timer_thread_dealloc (struct thread_node *thread)
-{
-  thread_deinit (thread);
-  list_unlink (&thread->links);
-  list_append (&thread_free_list, &thread->links);
-}
-
-
-/* Each of our threads which terminates executes this cleanup
-   handler. We never terminate threads ourselves; if a thread gets here
-   it means that the evil application has killed it.  If the thread has
-   timers, these require servicing and so we must hire a replacement
-   thread right away.  We must also unblock another thread that may
-   have been waiting for this thread to finish servicing a timer (see
-   timer_delete()).  */
-
-static void
-thread_cleanup (void *val)
-{
-  if (val != NULL)
-    {
-      struct thread_node *thread = val;
-
-      /* How did the signal thread get killed?  */
-      assert (thread != &__timer_signal_thread_rclk);
-#ifdef _POSIX_CPUTIME
-      assert (thread != &__timer_signal_thread_pclk);
-#endif
-#ifdef _POSIX_THREAD_CPUTIME
-      assert (thread != &__timer_signal_thread_tclk);
-#endif
-
-      pthread_mutex_lock (&__timer_mutex);
-
-      thread->exists = 0;
-
-      /* We are no longer processing a timer event.  */
-      thread->current_timer = 0;
-
-      if (list_isempty (&thread->timer_queue))
-	  __timer_thread_dealloc (thread);
-      else
-	(void) __timer_thread_start (thread);
-
-      pthread_mutex_unlock (&__timer_mutex);
-
-      /* Unblock potentially blocked timer_delete().  */
-      pthread_cond_broadcast (&thread->cond);
-    }
-}
-
-
-/* Handle a timer which is supposed to go off now.  */
-static void
-thread_expire_timer (struct thread_node *self, struct timer_node *timer)
-{
-  self->current_timer = timer; /* Lets timer_delete know timer is running. */
-
-  pthread_mutex_unlock (&__timer_mutex);
-
-  switch (__builtin_expect (timer->event.sigev_notify, SIGEV_SIGNAL))
-    {
-    case SIGEV_NONE:
-      assert (! "timer_create should never have created such a timer");
-      break;
-
-    case SIGEV_SIGNAL:
-#ifdef __NR_rt_sigqueueinfo
-      {
-	siginfo_t info;
-
-	/* First, clear the siginfo_t structure, so that we don't pass our
-	   stack content to other tasks.  */
-	memset (&info, 0, sizeof (siginfo_t));
-	/* We must pass the information about the data in a siginfo_t
-           value.  */
-	info.si_signo = timer->event.sigev_signo;
-	info.si_code = SI_TIMER;
-	info.si_pid = timer->creator_pid;
-	info.si_uid = getuid ();
-	info.si_value = timer->event.sigev_value;
-
-	INLINE_SYSCALL (rt_sigqueueinfo, 3, info.si_pid, info.si_signo, &info);
-      }
-#else
-      if (pthread_kill (self->captured, timer->event.sigev_signo) != 0)
-	{
-	  if (pthread_kill (self->id, timer->event.sigev_signo) != 0)
-	    abort ();
-        }
-#endif
-      break;
-
-    case SIGEV_THREAD:
-      timer->event.sigev_notify_function (timer->event.sigev_value);
-      break;
-
-    default:
-      assert (! "unknown event");
-      break;
-    }
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  self->current_timer = 0;
-
-  pthread_cond_broadcast (&self->cond);
-}
-
-
-/* Thread function; executed by each timer thread. The job of this
-   function is to wait on the thread's timer queue and expire the
-   timers in chronological order as close to their scheduled time as
-   possible.  */
-static void *
-__attribute__ ((noreturn))
-thread_func (void *arg)
-{
-  struct thread_node *self = arg;
-
-  /* Register cleanup handler, in case rogue application terminates
-     this thread.  (This cannot happen to __timer_signal_thread, which
-     doesn't invoke application callbacks). */
-
-  pthread_cleanup_push (thread_cleanup, self);
-
-  pthread_mutex_lock (&__timer_mutex);
-
-  while (1)
-    {
-      struct list_links *first;
-      struct timer_node *timer = NULL;
-
-      /* While the timer queue is not empty, inspect the first node.  */
-      first = list_first (&self->timer_queue);
-      if (first != list_null (&self->timer_queue))
-	{
-	  struct timespec now;
-
-	  timer = timer_links2ptr (first);
-
-	  /* This assumes that the elements of the list of one thread
-	     are all for the same clock.  */
-	  clock_gettime (timer->clock, &now);
-
-	  while (1)
-	    {
-	      /* If the timer is due or overdue, remove it from the queue.
-		 If it's a periodic timer, re-compute its new time and
-		 requeue it.  Either way, perform the timer expiry. */
-	      if (timespec_compare (&now, &timer->expirytime) < 0)
-		break;
-
-	      list_unlink_ip (first);
-
-	      if (__builtin_expect (timer->value.it_interval.tv_sec, 0) != 0
-		  || timer->value.it_interval.tv_nsec != 0)
-		{
-		  timespec_add (&timer->expirytime, &now,
-				&timer->value.it_interval);
-		  __timer_thread_queue_timer (self, timer);
-		}
-
-	      thread_expire_timer (self, timer);
-
-	      first = list_first (&self->timer_queue);
-	      if (first == list_null (&self->timer_queue))
-		break;
-
-	      timer = timer_links2ptr (first);
-	    }
-	}
-
-      /* If the queue is not empty, wait until the expiry time of the
-	 first node.  Otherwise wait indefinitely.  Insertions at the
-	 head of the queue must wake up the thread by broadcasting
-	 this condition variable.  */
-      if (timer != NULL)
-	pthread_cond_timedwait (&self->cond, &__timer_mutex,
-				&timer->expirytime);
-      else
-	pthread_cond_wait (&self->cond, &__timer_mutex);
-    }
-  /* This macro will never be executed since the while loop loops
-     forever - but we have to add it for proper nesting.  */
-  pthread_cleanup_pop (1);
-
-}
-
-
-/* Enqueue a timer in wakeup order in the thread's timer queue.
-   Returns 1 if the timer was inserted at the head of the queue,
-   causing the queue's next wakeup time to change. */
-
-int
-__timer_thread_queue_timer (struct thread_node *thread,
-			    struct timer_node *insert)
-{
-  struct list_links *iter;
-  int athead = 1;
-
-  for (iter = list_first (&thread->timer_queue);
-       iter != list_null (&thread->timer_queue);
-        iter = list_next (iter))
-    {
-      struct timer_node *timer = timer_links2ptr (iter);
-
-      if (timespec_compare (&insert->expirytime, &timer->expirytime) < 0)
-	  break;
-      athead = 0;
-    }
-
-  list_insbefore (iter, &insert->links);
-  return athead;
-}
-
-
-/* Start a thread and associate it with the given thread node.  Global
-   lock must be held by caller.  */
-int
-__timer_thread_start (struct thread_node *thread)
-{
-  int retval = 1;
-
-  assert (!thread->exists);
-  thread->exists = 1;
-
-  if (pthread_create (&thread->id, &thread->attr, thread_func, thread) != 0)
-    {
-      thread->exists = 0;
-      retval = -1;
-    }
-
-  return retval;
-}
-
-
-void
-__timer_thread_wakeup (struct thread_node *thread)
-{
-  pthread_cond_broadcast (&thread->cond);
-}
-
-
-/* Compare two pthread_attr_t thread attributes for exact equality.
-   Returns 1 if they are equal, otherwise zero if they are not equal or
-   contain illegal values.  This version is LinuxThreads-specific for
-   performance reason.  One could use the access functions to get the
-   values of all the fields of the attribute structure.  */
-static int
-thread_attr_compare (const pthread_attr_t *left, const pthread_attr_t *right)
-{
-  return (left->__detachstate == right->__detachstate
-	  && left->__schedpolicy == right->__schedpolicy
-	  && (left->__schedparam.sched_priority
-	      == right->__schedparam.sched_priority)
-	  && left->__inheritsched == right->__inheritsched
-	  && left->__scope == right->__scope);
-}
-
-
-/* Search the list of active threads and find one which has matching
-   attributes.  Global mutex lock must be held by caller.  */
-struct thread_node *
-__timer_thread_find_matching (const pthread_attr_t *desired_attr,
-			      clockid_t desired_clock_id)
-{
-  struct list_links *iter = list_first (&thread_active_list);
-
-  while (iter != list_null (&thread_active_list))
-    {
-      struct thread_node *candidate = thread_links2ptr (iter);
-
-      if (thread_attr_compare (desired_attr, &candidate->attr)
-	  && desired_clock_id == candidate->clock_id)
-	{
-	  list_unlink (iter);
-	  return candidate;
-        }
-
-      iter = list_next (iter);
-    }
-
-  return NULL;
-}
-
-
-/* Grab a free timer structure from the global free list.  The global
-   lock must be held by the caller.  */
-struct timer_node *
-__timer_alloc (void)
-{
-  struct list_links *node = list_first (&timer_free_list);
-
-  if (node != list_null (&timer_free_list))
-    {
-      struct timer_node *timer = timer_links2ptr (node);
-      list_unlink_ip (node);
-      timer->inuse = TIMER_INUSE;
-      timer->refcount = 1;
-      return timer;
-    }
-
-  return NULL;
-}
-
-
-/* Return a timer structure to the global free list.  The global lock
-   must be held by the caller.  */
-void
-__timer_dealloc (struct timer_node *timer)
-{
-  assert (timer->refcount == 0);
-  timer->thread = NULL;	/* Break association between timer and thread.  */
-  timer->inuse = TIMER_FREE;
-  list_append (&timer_free_list, &timer->links);
-}
-
-
-/* Thread cancellation handler which unlocks a mutex.  */
-void
-__timer_mutex_cancel_handler (void *arg)
-{
-  pthread_mutex_unlock (arg);
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/timer_settime.c b/newlib/libc/sys/linux/linuxthreads/timer_settime.c
deleted file mode 100644
index 2f187fd18..000000000
--- a/newlib/libc/sys/linux/linuxthreads/timer_settime.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Kaz Kylheku <kaz@ashi.footprints.net>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <pthread.h>
-#include <time.h>
-
-#include "posix-timer.h"
-
-
-/* Set timer TIMERID to VALUE, returning old value in OVLAUE.  */
-int
-timer_settime (timerid, flags, value, ovalue)
-     timer_t timerid;
-     int flags;
-     const struct itimerspec *value;
-     struct itimerspec *ovalue;
-{
-  struct timer_node *timer;
-  struct thread_node *thread = NULL;
-  struct timespec now;
-  int have_now = 0, need_wakeup = 0;
-  int retval = -1;
-
-  timer = timer_id2ptr (timerid);
-  if (timer == NULL)
-    {
-      __set_errno (EINVAL);
-      goto bail;
-    }
-
-  if (value->it_interval.tv_nsec < 0
-      || value->it_interval.tv_nsec >= 1000000000
-      || value->it_value.tv_nsec < 0
-      || value->it_value.tv_nsec >= 1000000000)
-    {
-      __set_errno (EINVAL);
-      goto bail;
-    }
-
-  /* Will need to know current time since this is a relative timer;
-     might as well make the system call outside of the lock now! */
-
-  if ((flags & TIMER_ABSTIME) == 0)
-    {
-      clock_gettime (timer->clock, &now);
-      have_now = 1;
-    }
-
-  pthread_mutex_lock (&__timer_mutex);
-  timer_addref (timer);
-
-  /* One final check of timer validity; this one is possible only
-     until we have the mutex, because it accesses the inuse flag. */
-
-  if (! timer_valid(timer))
-    {
-      __set_errno (EINVAL);
-      goto unlock_bail;
-    }
-
-  if (ovalue != NULL)
-    {
-      ovalue->it_interval = timer->value.it_interval;
-
-      if (timer->armed)
-	{
-	  if (! have_now)
-	    {
-	      pthread_mutex_unlock (&__timer_mutex);
-	      clock_gettime (timer->clock, &now);
-	      have_now = 1;
-	      pthread_mutex_lock (&__timer_mutex);
-	      timer_addref (timer);
-	    }
-
-	  timespec_sub (&ovalue->it_value, &timer->expirytime, &now);
-	}
-      else
-	{
-	  ovalue->it_value.tv_sec = 0;
-	  ovalue->it_value.tv_nsec = 0;
-	}
-    }
-
-  timer->value = *value;
-
-  list_unlink_ip (&timer->links);
-  timer->armed = 0;
-
-  thread = timer->thread;
-
-  /* A value of { 0, 0 } causes the timer to be stopped. */
-  if (value->it_value.tv_sec != 0
-      || __builtin_expect (value->it_value.tv_nsec != 0, 1))
-    {
-      if ((flags & TIMER_ABSTIME) != 0)
-	/* The user specified the expiration time.  */
-	timer->expirytime = value->it_value;
-      else
-	timespec_add (&timer->expirytime, &now, &value->it_value);
-
-      /* Only need to wake up the thread if timer is inserted
-	 at the head of the queue. */
-      if (thread != NULL)
-	need_wakeup = __timer_thread_queue_timer (thread, timer);
-      timer->armed = 1;
-    }
-
-  retval = 0;
-
-unlock_bail:
-  timer_delref (timer);
-  pthread_mutex_unlock (&__timer_mutex);
-
-bail:
-  if (thread != NULL && need_wakeup)
-    __timer_thread_wakeup (thread);
-
-  return retval;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/tst-cancel.c b/newlib/libc/sys/linux/linuxthreads/tst-cancel.c
deleted file mode 100644
index da32aaf5e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/tst-cancel.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* Tests for cancelation handling.  */
-
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/stat.h>
-
-int fd;
-
-pthread_barrier_t bar;
-
-
-static void
-cleanup (void *arg)
-{
-  int nr = (int) (long int) arg;
-  char s[30];
-  char *cp = stpcpy (s, "cleanup ");
-  *cp++ = '0' + nr;
-  *cp++ = '\n';
-  __libc_lseek (fd, 0, SEEK_END);
-  __libc_write (fd, s, cp - s);
-}
-
-
-static void *
-t1 (void *arg)
-{
-  pthread_cleanup_push (cleanup, (void *) (long int) 1);
-  return NULL;
-  pthread_cleanup_pop (0);
-}
-
-
-static void
-inner (int a)
-{
-  pthread_cleanup_push (cleanup, (void *) (long int) a);
-  if (a)
-    return;
-  pthread_cleanup_pop (0);
-}
-
-
-static void *
-t2 (void *arg)
-{
-  pthread_cleanup_push (cleanup, (void *) (long int) 2);
-  inner ((int) (long int) arg);
-  return NULL;
-  pthread_cleanup_pop (0);
-}
-
-
-/* This does not work yet.  */
-volatile int cleanupokcnt;
-
-static void
-cleanupok (void *arg)
-{
-  ++cleanupokcnt;
-}
-
-
-static void *
-t3 (void *arg)
-{
-  pthread_cleanup_push (cleanupok, (void *) (long int) 4);
-  inner ((int) (long int) arg);
-  pthread_exit (NULL);
-  pthread_cleanup_pop (0);
-}
-
-
-static void
-innerok (int a)
-{
-  pthread_cleanup_push (cleanupok, (void *) (long int) a);
-  pthread_exit (NULL);
-  pthread_cleanup_pop (0);
-}
-
-
-static void *
-t4 (void *arg)
-{
-  pthread_cleanup_push (cleanupok, (void *) (long int) 6);
-  innerok ((int) (long int) arg);
-  pthread_cleanup_pop (0);
-  return NULL;
-}
-
-
-int
-main (int argc, char *argv[])
-{
-  pthread_t td;
-  int err;
-  char *tmp;
-  const char *prefix;
-  const char template[] = "thtstXXXXXX";
-  struct stat64 st;
-  int result = 0;
-
-  prefix = argc > 1 ? argv[1] : "";
-  tmp = (char *) alloca (strlen (prefix) + sizeof template);
-  strcpy (stpcpy (tmp, prefix), template);
-
-  fd = mkstemp (tmp);
-  if (fd == -1)
-    {
-      printf ("cannot create temporary file: %m");
-      exit (1);
-    }
-  unlink (tmp);
-
-  err = pthread_barrier_init (&bar, NULL, 2);
-  if (err != 0 )
-    {
-      printf ("cannot create barrier: %s\n", strerror (err));
-      exit (1);
-    }
-
-#ifdef NOT_YET
-  err = pthread_create (&td, NULL, t1, NULL);
-  if (err != 0)
-    {
-      printf ("cannot create thread t1: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_join (td, NULL);
-  if (err != 0)
-    {
-      printf ("cannot join thread: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_create (&td, NULL, t2, (void *) 3);
-  if (err != 0)
-    {
-      printf ("cannot create thread t2: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_join (td, NULL);
-  if (err != 0)
-    {
-      printf ("cannot join thread: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_create (&td, NULL, t3, (void *) 5);
-  if (err != 0)
-    {
-      printf ("cannot create thread t3: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_join (td, NULL);
-  if (err != 0)
-    {
-      printf ("cannot join thread: %s\n", strerror (err));
-      exit (1);
-    }
-#endif
-
-  err = pthread_create (&td, NULL, t4, (void *) 7);
-  if (err != 0)
-    {
-      printf ("cannot create thread t3: %s\n", strerror (err));
-      exit (1);
-    }
-
-  err = pthread_join (td, NULL);
-  if (err != 0)
-    {
-      printf ("cannot join thread: %s\n", strerror (err));
-      exit (1);
-    }
-
-  if (fstat64 (fd, &st) < 0)
-    {
-      printf ("cannot stat temporary file: %m\n");
-      result = 1;
-    }
-  else if (st.st_size != 0)
-    {
-      char buf[512];
-      puts ("some cleanup handlers ran:");
-      fflush (stdout);
-      __lseek (fd, 0, SEEK_SET);
-      while (1)
-	{
-	  ssize_t n = read (fd, buf, sizeof buf);
-	  if (n <= 0)
-	    break;
-	  write (STDOUT_FILENO, buf, n);
-	}
-      result = 1;
-    }
-
-  // if (cleanupokcnt != 3)  will be three once t3 runs
-  if (cleanupokcnt != 2)
-    {
-      printf ("cleanupokcnt = %d\n", cleanupokcnt);
-      result = 1;
-    }
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/tst-context.c b/newlib/libc/sys/linux/linuxthreads/tst-context.c
deleted file mode 100644
index 9066e837e..000000000
--- a/newlib/libc/sys/linux/linuxthreads/tst-context.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <errno.h>
-#include <error.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <ucontext.h>
-
-#include "pt-machine.h"
-
-
-#define N	4
-
-#ifdef FLOATING_STACKS
-static char stacks[N][8192];
-static ucontext_t ctx[N][2];
-static volatile int failures;
-
-static void
-fct (long int n)
-{
-  /* Just to use the thread local descriptor.  */
-  printf ("%ld: in %s now\n", n, __FUNCTION__);
-  errno = 0;
-}
-
-static void *
-threadfct (void *arg)
-{
-  int n = (int) (long int) arg;
-
-  if (getcontext (&ctx[n][1]) != 0)
-    {
-      printf ("%d: cannot get context: %m\n", n);
-      exit (1);
-    }
-
-  printf ("%d: %s: before makecontext\n", n, __FUNCTION__);
-
-  ctx[n][1].uc_stack.ss_sp = stacks[n];
-  ctx[n][1].uc_stack.ss_size = 8192;
-  ctx[n][1].uc_link = &ctx[n][0];
-  makecontext (&ctx[n][1], (void (*) (void)) fct, 1, (long int) n);
-
-  printf ("%d: %s: before swapcontext\n", n, __FUNCTION__);
-
-  if (swapcontext (&ctx[n][0], &ctx[n][1]) != 0)
-    {
-      ++failures;
-      printf ("%d: %s: swapcontext failed\n", n, __FUNCTION__);
-    }
-  else
-    printf ("%d: back in %s\n", n, __FUNCTION__);
-
-  return NULL;
-}
-#endif
-
-
-#ifdef FLOATING_STACKS
-static volatile int global;
-#endif
-
-int
-main (void)
-{
-#ifndef FLOATING_STACKS
-  puts ("not supported");
-  return 0;
-#else
-  int n;
-  pthread_t th[N];
-  ucontext_t mctx;
-
-  puts ("making contexts");
-  if (getcontext (&mctx) != 0)
-    {
-      if (errno == ENOSYS)
-	{
-	  puts ("context handling not supported");
-	  exit (0);
-	}
-
-      printf ("%s: getcontext: %m\n", __FUNCTION__);
-      exit (1);
-    }
-
-  /* Play some tricks with this context.  */
-  if (++global == 1)
-    if (setcontext (&mctx) != 0)
-      {
-	printf ("%s: setcontext: %m\n", __FUNCTION__);
-	exit (1);
-      }
-  if (global != 2)
-    {
-      printf ("%s: 'global' not incremented twice\n", __FUNCTION__);
-      exit (1);
-    }
-
-  for (n = 0; n < N; ++n)
-    if (pthread_create (&th[n], NULL, threadfct, (void *) n) != 0)
-      error (EXIT_FAILURE, errno, "cannot create all threads");
-
-  for (n = 0; n < N; ++n)
-    pthread_join (th[n], NULL);
-
-  return failures;
-#endif
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/tststack.c b/newlib/libc/sys/linux/linuxthreads/tststack.c
deleted file mode 100644
index 6789ff861..000000000
--- a/newlib/libc/sys/linux/linuxthreads/tststack.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Tests for variable stack size handling.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <pthread.h>
-#include <stdio.h>
-#include <unistd.h>
-
-static void *f1 (void *);
-static void *f2 (void *);
-
-int
-main (void)
-{
-  pthread_attr_t attr;
-  pthread_t th1 = 0;
-  pthread_t th2 = 0;
-  void *res1;
-  void *res2;
-
-  pthread_attr_init (&attr);
-  if (pthread_attr_setstacksize (&attr, 70*1024) != 0)
-    {
-      puts ("invalid stack size");
-      return 1;
-    }
-
-  pthread_create (&th1, NULL, f1, NULL);
-  pthread_create (&th2, &attr, f2, NULL);
-
-  pthread_join (th1, &res1);
-  pthread_join (th2, &res2);
-
-  printf ("res1 = %p\n", res1);
-  printf ("res2 = %p\n", res2);
-
-  return res1 != (void *) 1 || res2 != (void *) 2;
-}
-
-static void *
-f1 (void *parm)
-{
-  printf ("This is `%s'\n", __FUNCTION__);
-  fflush (stdout);
-
-  return (void *) 1;
-}
-
-static void *
-f2 (void *parm)
-{
-  printf ("This is `%s'\n", __FUNCTION__);
-  fflush (stdout);
-  sleep (1);
-
-  return (void *) 2;
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/unload.c b/newlib/libc/sys/linux/linuxthreads/unload.c
deleted file mode 100644
index c528df234..000000000
--- a/newlib/libc/sys/linux/linuxthreads/unload.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Tests for non-unloading of libpthread.
-   Copyright (C) 2000 Free Software Foundation, Inc.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2000.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <dlfcn.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <gnu/lib-names.h>
-
-int
-main (void)
-{
-  void *p = dlopen (PREFIX LIBPTHREAD_SO, RTLD_LAZY);
-
-  if (p == NULL)
-    {
-      puts ("failed to load " LIBPTHREAD_SO);
-      exit (1);
-    }
-
-  if (dlclose (p) != 0)
-    {
-      puts ("dlclose (" LIBPTHREAD_SO ") failed");
-      exit (1);
-    }
-
-  puts ("seems to work");
-
-  exit (0);
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/weaks.c b/newlib/libc/sys/linux/linuxthreads/weaks.c
deleted file mode 100644
index 6e2cf4bf1..000000000
--- a/newlib/libc/sys/linux/linuxthreads/weaks.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* The weak pthread functions for Linux.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <errno.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <shlib-compat.h>
-#include <bp-sym.h>
-#include "libc-symbols.h"
-
-extern int __pthread_return_0 (void);
-extern int __pthread_return_1 (void);
-extern void __pthread_return_void (void);
-extern void weak_function pthread_exit (void *__retval)
-     __attribute__ ((noreturn));
-
-/* Those are pthread functions which return 0 if successful. */
-weak_alias (__pthread_return_0, BP_SYM (__libc_pthread_attr_init_2_1))
-versioned_symbol (libpthread, BP_SYM (__libc_pthread_attr_init_2_1),
-		  BP_SYM (pthread_attr_init), GLIBC_2_1);
-#if SHLIB_COMPAT(libpthread, GLIBC_2_0, GLIBC_2_1)
-weak_alias (__pthread_return_0, BP_SYM (__libc_pthread_attr_init_2_0))
-compat_symbol (libpthread, BP_SYM (__libc_pthread_attr_init_2_0),
-	       BP_SYM (pthread_attr_init), GLIBC_2_0);
-#endif
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setdetachstate))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getdetachstate))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setschedparam))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getschedparam))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setschedpolicy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getschedpolicy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setinheritsched))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getinheritsched))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setscope))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getscope))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setstackaddr))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getstackaddr))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_setstacksize))
-weak_alias (__pthread_return_0, BP_SYM (pthread_attr_getstacksize))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutex_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutex_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutex_lock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutex_trylock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutex_unlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutexattr_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutexattr_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutexattr_settype))
-weak_alias (__pthread_return_0, BP_SYM (pthread_mutexattr_gettype))
-weak_alias (__pthread_return_0, BP_SYM (pthread_condattr_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_condattr_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_setschedparam))
-weak_alias (__pthread_return_0, BP_SYM (pthread_getschedparam))
-weak_alias (__pthread_return_0, BP_SYM (pthread_getcancelstate))
-weak_alias (__pthread_return_0, BP_SYM (pthread_setcancelstate))
-weak_alias (__pthread_return_0, BP_SYM (pthread_setcanceltype))
-weak_alias (__pthread_return_0, pthread_setconcurrency)
-weak_alias (__pthread_return_0, pthread_getconcurrency)
-weak_alias (__pthread_return_0, pthread_self)
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_wait))
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_timedwait))
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_signal))
-weak_alias (__pthread_return_0, BP_SYM (pthread_cond_broadcast))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_rdlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_wrlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_tryrdlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_trywrlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlock_unlock))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlockattr_init))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlockattr_destroy))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlockattr_setpshared))
-weak_alias (__pthread_return_0, BP_SYM (pthread_rwlockattr_getpshared))
-
-
-/* Those are pthread functions which return 1 if successful. */
-weak_alias (__pthread_return_1, pthread_equal)
-
-/* pthread_exit () is a special case. */
-void
-weak_function
-pthread_exit (void *retval)
-{
-  exit (EXIT_SUCCESS);
-}
-
-int
-__pthread_return_0 (void)
-{
-  return 0;
-}
-
-int
-__pthread_return_1 (void)
-{
-  return 1;
-}
-
-void
-__pthread_return_void (void)
-{
-}
diff --git a/newlib/libc/sys/linux/linuxthreads/wrapsyscall.c b/newlib/libc/sys/linux/linuxthreads/wrapsyscall.c
deleted file mode 100644
index ec1bc2a90..000000000
--- a/newlib/libc/sys/linux/linuxthreads/wrapsyscall.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/* Wrapper arpund system calls to provide cancelation points.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <pthread.h>
-#include <unistd.h>
-#include <stdarg.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <termios.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <sys/socket.h>
-#include "libc-symbols.h"
-
-
-#ifndef SHARED
-/* We need a hook to force this file to be linked in when static
-   libpthread is used.  */
-const int __pthread_provide_wrappers = 0;
-#endif
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-#define ELIX_2_PLUS
-#endif
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-#define ELIX_3_PLUS
-#endif
-
-#define CANCELABLE_SYSCALL(res_type, name, param_list, params) \
-res_type __libc_##name param_list;					      \
-res_type								      \
-__attribute__ ((weak))							      \
-name param_list								      \
-{									      \
-  res_type result;							      \
-  int oldtype;								      \
-  pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, &oldtype);	      \
-  result = __libc_##name params;					      \
-  pthread_setcanceltype (oldtype, NULL);				      \
-  return result;							      \
-}
-
-#define CANCELABLE_SYSCALL_VA(res_type, name, param_list, params, last_arg) \
-res_type __libc_##name param_list;					      \
-res_type								      \
-__attribute__ ((weak))							      \
-name param_list								      \
-{									      \
-  res_type result;							      \
-  int oldtype;								      \
-  va_list ap;								      \
-  pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, &oldtype);	      \
-  va_start (ap, last_arg);						      \
-  result = __libc_##name params;					      \
-  va_end (ap);								      \
-  pthread_setcanceltype (oldtype, NULL);				      \
-  return result;							      \
-}
-
-
-/* close(2).  */
-CANCELABLE_SYSCALL (int, close, (int fd), (fd))
-strong_alias (close, __close)
-
-
-/* fcntl(2).  */
-CANCELABLE_SYSCALL_VA (int, fcntl, (int fd, int cmd, ...),
-		       (fd, cmd, va_arg (ap, long int)), cmd)
-strong_alias (fcntl, __fcntl)
-
-
-/* fsync(2).  */
-CANCELABLE_SYSCALL (int, fsync, (int fd), (fd))
-
-
-/* lseek(2).  */
-CANCELABLE_SYSCALL (off_t, lseek, (int fd, off_t offset, int whence),
-		    (fd, offset, whence))
-strong_alias (lseek, __lseek)
-
-
-#ifdef ELIX_2_PLUS
-/* lseek64(2).  */
-CANCELABLE_SYSCALL (loff_t, lseek64, (int fd, loff_t offset, int whence),
-		    (fd, offset, whence))
-#endif
-
-
-/* msync(2).  */
-CANCELABLE_SYSCALL (int, msync, (__ptr_t addr, size_t length, int flags),
-		    (addr, length, flags))
-
-
-/* nanosleep(2).  */
-CANCELABLE_SYSCALL (int, nanosleep, (const struct timespec *requested_time,
-				     struct timespec *remaining),
-		    (requested_time, remaining))
-
-
-/* open(2).  */
-CANCELABLE_SYSCALL_VA (int, open, (const char *pathname, int flags, ...),
-		       (pathname, flags, va_arg (ap, int)), flags)
-strong_alias (open, __open)
-
-
-#ifdef ELIX_2_PLUS
-/* open64(3).  */
-CANCELABLE_SYSCALL_VA (int, open64, (const char *pathname, int flags, ...),
-		       (pathname, flags, va_arg (ap, int)), flags)
-strong_alias (open64, __open64)
-#endif
-
-
-/* pause(2).  */
-CANCELABLE_SYSCALL (int, pause, (void), ())
-
-
-/* pread(3).  */
-CANCELABLE_SYSCALL (ssize_t, pread, (int fd, void *buf, size_t count,
-				     off_t offset),
-		    (fd, buf, count, offset))
-
-
-#ifdef ELIX_2_PLUS
-/* pread64(3).  */
-CANCELABLE_SYSCALL (ssize_t, pread64, (int fd, void *buf, size_t count,
-				       loff_t offset),
-		    (fd, buf, count, offset))
-strong_alias (pread64, __pread64)
-#endif
-
-
-/* pwrite(3).  */
-CANCELABLE_SYSCALL (ssize_t, pwrite, (int fd, const void *buf, size_t n,
-				      off_t offset),
-		    (fd, buf, n, offset))
-
-
-#ifdef ELIX_2_PLUS
-/* pwrite64(3).  */
-CANCELABLE_SYSCALL (ssize_t, pwrite64, (int fd, const void *buf, size_t n,
-					loff_t offset),
-		    (fd, buf, n, offset))
-strong_alias (pwrite64, __pwrite64)
-#endif
-
-
-/* read(2).  */
-CANCELABLE_SYSCALL (ssize_t, read, (int fd, void *buf, size_t count),
-		    (fd, buf, count))
-strong_alias (read, __read)
-
-
-#ifdef ELIX_3_PLUS
-/* system(3).  */
-CANCELABLE_SYSCALL (int, system, (const char *line), (line))
-#endif
-
-
-/* tcdrain(2).  */
-CANCELABLE_SYSCALL (int, tcdrain, (int fd), (fd))
-
-
-#ifdef ELIX_3_PLUS
-/* wait(2).  */
-CANCELABLE_SYSCALL (__pid_t, wait, (int *stat_loc), (stat_loc))
-strong_alias (wait, __wait)
-#endif
-
-
-#ifdef ELIX_3_PLUS
-/* waitpid(2).  */
-CANCELABLE_SYSCALL (__pid_t, waitpid, (__pid_t pid, int *stat_loc,
-				       int options),
-		    (pid, stat_loc, options))
-#endif
-
-/* for libpthread usage */
-CANCELABLE_SYSCALL (__pid_t, __waitpid, (__pid_t pid, int *stat_loc,
-				       int options),
-		    (pid, stat_loc, options))
-
-/* write(2).  */
-CANCELABLE_SYSCALL (ssize_t, write, (int fd, const void *buf, size_t n),
-		    (fd, buf, n))
-strong_alias (write, __write)
-
-
-/* The following system calls are thread cancellation points specified
-   in XNS.  */
-
-/* accept(2).  */
-CANCELABLE_SYSCALL (int, accept, (int fd, __SOCKADDR_ARG addr,
-				  socklen_t *addr_len),
-		    (fd, addr, addr_len))
-
-/* connect(2).  */
-CANCELABLE_SYSCALL (int, connect, (int fd, __CONST_SOCKADDR_ARG addr,
-				     socklen_t len),
-		    (fd, addr, len))
-strong_alias (connect, __connect)
-
-/* recv(2).  */
-CANCELABLE_SYSCALL (ssize_t, recv, (int fd, __ptr_t buf, size_t n, int flags),
-		    (fd, buf, n, flags))
-
-/* recvfrom(2).  */
-CANCELABLE_SYSCALL (ssize_t, recvfrom, (int fd, __ptr_t buf, size_t n, int flags,
-					__SOCKADDR_ARG addr, socklen_t *addr_len),
-		    (fd, buf, n, flags, addr, addr_len))
-
-/* recvmsg(2).  */
-CANCELABLE_SYSCALL (ssize_t, recvmsg, (int fd, struct msghdr *message, int flags),
-		    (fd, message, flags))
-
-/* send(2).  */
-CANCELABLE_SYSCALL (ssize_t, send, (int fd, const __ptr_t buf, size_t n,
-				    int flags),
-		    (fd, buf, n, flags))
-strong_alias (send, __send)
-
-/* sendmsg(2).  */
-CANCELABLE_SYSCALL (ssize_t, sendmsg, (int fd, const struct msghdr *message,
-				       int flags),
-		    (fd, message, flags))
-
-/* sendto(2).  */
-CANCELABLE_SYSCALL (ssize_t, sendto, (int fd, const __ptr_t buf, size_t n,
-				      int flags, __CONST_SOCKADDR_ARG addr,
-				      socklen_t addr_len),
-		    (fd, buf, n, flags, addr, addr_len))
diff --git a/newlib/libc/sys/linux/machine/Makefile.am b/newlib/libc/sys/linux/machine/Makefile.am
deleted file mode 100644
index 3f10b8fbf..000000000
--- a/newlib/libc/sys/linux/machine/Makefile.am
+++ /dev/null
@@ -1,21 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-noinst_DATA = $(CRT0)
-
-$(CRT0): $(machine_dir)/$(CRT0)
-	rm -f $@
-	ln $(machine_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(machine_dir)/$(CRT0) $@
-
-$(machine_dir)/$(CRT0): ; @true
-
-CLEANFILES = $(CRT0)
-
-doc:
-
-ACLOCAL_AMFLAGS = -I ../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/linux/machine/Makefile.in b/newlib/libc/sys/linux/machine/Makefile.in
deleted file mode 100644
index d56668de1..000000000
--- a/newlib/libc/sys/linux/machine/Makefile.in
+++ /dev/null
@@ -1,371 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(machine_dir) .
-
-noinst_DATA = $(CRT0)
-
-CLEANFILES = $(CRT0)
-
-ACLOCAL_AMFLAGS = -I ../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../../acinclude.m4 ../../../../aclocal.m4 \
-		../../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(DATA)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-$(CRT0): $(machine_dir)/$(CRT0)
-	rm -f $@
-	ln $(machine_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
-	 || cp $(machine_dir)/$(CRT0) $@
-
-$(machine_dir)/$(CRT0): ; @true
-
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/machine/aclocal.m4 b/newlib/libc/sys/linux/machine/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/machine/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/machine/configure b/newlib/libc/sys/linux/machine/configure
deleted file mode 100755
index 87299896c..000000000
--- a/newlib/libc/sys/linux/machine/configure
+++ /dev/null
@@ -1,3437 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=i386
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../../.. $srcdir/../../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../../.. $srcdir/../../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1663: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1693: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1744: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1787 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1818: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1823: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1851: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1894: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1924: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1927: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1962: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1979: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1991: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2029: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2050: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2223: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2253: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2315: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2386: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2418: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2453: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2485: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2552 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2590: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2603 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2640: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2672: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2707: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2739: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2774: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2806: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2842: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2847 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2876: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-if test -n "${machine_dir}"; then
-  subdirs="${machine_dir}"
-
-fi
-
-CRT0=
-if test -n "${machine_dir}"; then
-  CRT0=crt0.o
-fi
-
-
-
-
-if test x${machine_dir} != x; then
-  HAVE_MACHINE_DIR_TRUE=
-  HAVE_MACHINE_DIR_FALSE='#'
-else
-  HAVE_MACHINE_DIR_TRUE='#'
-  HAVE_MACHINE_DIR_FALSE=
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@CRT0@%$CRT0%g
-s%@HAVE_MACHINE_DIR_TRUE@%$HAVE_MACHINE_DIR_TRUE%g
-s%@HAVE_MACHINE_DIR_FALSE@%$HAVE_MACHINE_DIR_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${machine_dir}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libc/sys/linux/machine/configure.in b/newlib/libc/sys/linux/machine/configure.in
deleted file mode 100644
index a9dc30c9d..000000000
--- a/newlib/libc/sys/linux/machine/configure.in
+++ /dev/null
@@ -1,32 +0,0 @@
-dnl This is the newlib/libc/sys configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(i386)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../../..)
-
-NEWLIB_CONFIGURE(../../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-if test -n "${machine_dir}"; then
-  AC_CONFIG_SUBDIRS(${machine_dir})
-fi
-
-CRT0=
-if test -n "${machine_dir}"; then
-  CRT0=crt0.o
-fi
-AC_SUBST(CRT0)
-
-AM_CONDITIONAL(HAVE_MACHINE_DIR, test x${machine_dir} != x)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/linux/machine/hp-timing.h b/newlib/libc/sys/linux/machine/hp-timing.h
deleted file mode 100644
index 099342db8..000000000
--- a/newlib/libc/sys/linux/machine/hp-timing.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* High precision, low overhead timing functions.  Generic version.
-   Copyright (C) 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _HP_TIMING_H
-#define _HP_TIMING_H	1
-
-
-/* There are no generic definitions for the times.  We could write something
-   using the `gettimeofday' system call where available but the overhead of
-   the system call might be too high.
-
-   In case a platform supports timers in the hardware the following macros
-   and types must be defined:
-
-   - HP_TIMING_AVAIL: test for availability.
-
-   - HP_TIMING_INLINE: this macro is non-zero if the functionality is not
-     implemented using function calls but instead uses some inlined code
-     which might simply consist of a few assembler instructions.  We have to
-     know this since we might want to use the macros here in places where we
-     cannot make function calls.
-
-   - hp_timing_t: This is the type for variables used to store the time
-     values.
-
-   - HP_TIMING_ZERO: clear `hp_timing_t' object.
-
-   - HP_TIMING_NOW: place timestamp for current time in variable given as
-     parameter.
-
-   - HP_TIMING_DIFF_INIT: do whatever is necessary to be able to use the
-     HP_TIMING_DIFF macro.
-
-   - HP_TIMING_DIFF: compute difference between two times and store it
-     in a third.  Source and destination might overlap.
-
-   - HP_TIMING_ACCUM: add time difference to another variable.  This might
-     be a bit more complicated to implement for some platforms as the
-     operation should be thread-safe and 64bit arithmetic on 32bit platforms
-     is not.
-
-   - HP_TIMING_ACCUM_NT: this is the variant for situations where we know
-     there are no threads involved.
-
-   - HP_TIMING_PRINT: write decimal representation of the timing value into
-     the given string.  This operation need not be inline even though
-     HP_TIMING_INLINE is specified.
-
-*/
-
-/* Provide dummy definitions.  */
-#define HP_TIMING_AVAIL		(0)
-#define HP_TIMING_INLINE	(0)
-typedef int hp_timing_t;
-#define HP_TIMING_ZERO(Var)
-#define HP_TIMING_NOW(var)
-#define HP_TIMING_DIFF_INIT()
-#define HP_TIMING_DIFF(Diff, Start, End)
-#define HP_TIMING_ACCUM(Sum, Diff)
-#define HP_TIMING_ACCUM_NT(Sum, Diff)
-#define HP_TIMING_PRINT(Buf, Len, Val)
-
-/* Since this implementation is not available we tell the user about it.  */
-#define HP_TIMING_NONAVAIL	1
-
-#endif	/* hp-timing.h */
diff --git a/newlib/libc/sys/linux/machine/i386/Makefile.am b/newlib/libc/sys/linux/machine/i386/Makefile.am
deleted file mode 100644
index 4a49d8fe0..000000000
--- a/newlib/libc/sys/linux/machine/i386/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = get_clockfreq.c getpagesize.c hp-timing.c setjmp.S sigaction.c dl-procinfo.c
-
-liblinuxi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = liblinuxi386.la
-liblinuxi386_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../../Makefile.shared
-
-all: crt0.o
-
-AM_CFLAGS = -I$(srcdir)/../..
-ACLOCAL_AMFLAGS = -I ../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/linux/machine/i386/Makefile.in b/newlib/libc/sys/linux/machine/i386/Makefile.in
deleted file mode 100644
index 980544f8a..000000000
--- a/newlib/libc/sys/linux/machine/i386/Makefile.in
+++ /dev/null
@@ -1,413 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = get_clockfreq.c getpagesize.c hp-timing.c setjmp.S sigaction.c dl-procinfo.c
-
-liblinuxi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@liblinuxi386.la
-@USE_LIBTOOL_TRUE@liblinuxi386_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-AM_CFLAGS = -I$(srcdir)/../..
-ACLOCAL_AMFLAGS = -I ../../../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  get_clockfreq.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getpagesize.$(OBJEXT) hp-timing.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@setjmp.$(OBJEXT) sigaction.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@dl-procinfo.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-liblinuxi386_la_LIBADD = 
-@USE_LIBTOOL_TRUE@liblinuxi386_la_OBJECTS =  get_clockfreq.lo \
-@USE_LIBTOOL_TRUE@getpagesize.lo hp-timing.lo setjmp.lo sigaction.lo \
-@USE_LIBTOOL_TRUE@dl-procinfo.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(liblinuxi386_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(liblinuxi386_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../../../acinclude.m4 ../../../../../aclocal.m4 \
-		../../../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-liblinuxi386.la: $(liblinuxi386_la_OBJECTS) $(liblinuxi386_la_DEPENDENCIES)
-	$(LINK)  $(liblinuxi386_la_LDFLAGS) $(liblinuxi386_la_OBJECTS) $(liblinuxi386_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/machine/i386/aclocal.m4 b/newlib/libc/sys/linux/machine/i386/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libc/sys/linux/machine/i386/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libc/sys/linux/machine/i386/configure b/newlib/libc/sys/linux/machine/i386/configure
deleted file mode 100755
index dfae95526..000000000
--- a/newlib/libc/sys/linux/machine/i386/configure
+++ /dev/null
@@ -1,3351 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt0.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../../../.. $srcdir/../../../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../../../.. $srcdir/../../../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-for ac_prog in mawk gawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@AWK@%$AWK%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/linux/machine/i386/configure.in b/newlib/libc/sys/linux/machine/i386/configure.in
deleted file mode 100644
index 9d068f804..000000000
--- a/newlib/libc/sys/linux/machine/i386/configure.in
+++ /dev/null
@@ -1,22 +0,0 @@
-dnl This is the newlib/libc/sys/linux/machine/i386 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt0.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../../../..)
-
-NEWLIB_CONFIGURE(../../../../..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-AC_PROG_AWK
-fi
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/linux/machine/i386/crt0.c b/newlib/libc/sys/linux/machine/i386/crt0.c
deleted file mode 100644
index 4364f61d4..000000000
--- a/newlib/libc/sys/linux/machine/i386/crt0.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* libc/sys/linux/crt0.c - Run-time initialization */
-
-/* FIXME: This should be rewritten in assembler and
-          placed in a subdirectory specific to a platform.
-          There should also be calls to run constructors. */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <stdlib.h>
-#include <time.h>
-#include <string.h>
-
-
-extern char **environ;
-
-extern int main(int argc,char **argv,char **envp);
-
-extern char _end;
-extern char __bss_start;
-
-void _start(int args)
-{
-    /*
-     * The argument block begins above the current stack frame, because we
-     * have no return address. The calculation assumes that sizeof(int) ==
-     * sizeof(void *). This is okay for i386 user space, but may be invalid in
-     * other cases.
-     */
-    int *params = &args-1;
-    int argc = *params;
-    char **argv = (char **) (params+1);
-
-    environ = argv+argc+1;
-
-    /* Note: do not clear the .bss section.  When running with shared
-     *       libraries, certain data items such __mb_cur_max or environ
-     *       may get placed in the .bss, even though they are initialized
-     *       to non-zero values.  Clearing the .bss will end up zeroing
-     *       out their initial values.  The .bss is already initialized
-     *       by this time by Linux.  */
-
-    tzset(); /* initialize timezone info */
-    exit(main(argc,argv,environ));
-}
diff --git a/newlib/libc/sys/linux/machine/i386/dl-machine.h b/newlib/libc/sys/linux/machine/i386/dl-machine.h
deleted file mode 100644
index 032713e5b..000000000
--- a/newlib/libc/sys/linux/machine/i386/dl-machine.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* Machine-dependent ELF dynamic relocation inline functions.  i386 version.
-   Copyright (C) 1995,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef dl_machine_h
-#define dl_machine_h
-
-#define ELF_MACHINE_NAME "i386"
-
-#include <sys/param.h>
-#include <machine/weakalias.h>
-
-/* Return nonzero iff ELF header is compatible with the running host.  */
-static inline int __attribute__ ((unused))
-elf_machine_matches_host (const Elf32_Ehdr *ehdr)
-{
-  return ehdr->e_machine == EM_386;
-}
-
-
-/* Return the link-time address of _DYNAMIC.  Conveniently, this is the
-   first element of the GOT.  This must be inlined in a function which
-   uses global data.  */
-static inline Elf32_Addr __attribute__ ((unused))
-elf_machine_dynamic (void)
-{
-  register Elf32_Addr *got asm ("%ebx");
-  return *got;
-}
-
-
-/* Return the run-time load address of the shared object.  */
-static inline Elf32_Addr __attribute__ ((unused))
-elf_machine_load_address (void)
-{
-  Elf32_Addr addr;
-  asm ("leal _dl_start@GOTOFF(%%ebx), %0\n"
-       "subl _dl_start@GOT(%%ebx), %0"
-       : "=r" (addr) : : "cc");
-  return addr;
-}
-
-#if !defined PROF && !__BOUNDED_POINTERS__
-/* We add a declaration of this function here so that in dl-runtime.c
-   the ELF_MACHINE_RUNTIME_TRAMPOLINE macro really can pass the parameters
-   in registers.
-
-   We cannot use this scheme for profiling because the _mcount call
-   destroys the passed register information.  */
-/* GKM FIXME: Fix trampoline to pass bounds so we can do
-   without the `__unbounded' qualifier.  */
-static ElfW(Addr) fixup (struct link_map *__unbounded l, ElfW(Word) reloc_offset)
-     __attribute__ ((regparm (2), unused));
-static ElfW(Addr) profile_fixup (struct link_map *l, ElfW(Word) reloc_offset,
-				 ElfW(Addr) retaddr)
-     __attribute__ ((regparm (3), unused));
-#endif
-
-/* Set up the loaded object described by L so its unrelocated PLT
-   entries will jump to the on-demand fixup code in dl-runtime.c.  */
-
-static inline int __attribute__ ((unused))
-elf_machine_runtime_setup (struct link_map *l, int lazy, int profile)
-{
-  Elf32_Addr *got;
-  extern void _dl_runtime_resolve (Elf32_Word);
-  extern void _dl_runtime_profile (Elf32_Word);
-
-  if (l->l_info[DT_JMPREL] && lazy)
-    {
-      /* The GOT entries for functions in the PLT have not yet been filled
-	 in.  Their initial contents will arrange when called to push an
-	 offset into the .rel.plt section, push _GLOBAL_OFFSET_TABLE_[1],
-	 and then jump to _GLOBAL_OFFSET_TABLE[2].  */
-      got = (Elf32_Addr *) D_PTR (l, l_info[DT_PLTGOT]);
-      got[1] = (Elf32_Addr) l;	/* Identify this shared object.  */
-
-      /* The got[2] entry contains the address of a function which gets
-	 called to get the address of a so far unresolved function and
-	 jump to it.  The profiling extension of the dynamic linker allows
-	 to intercept the calls to collect information.  In this case we
-	 don't store the address in the GOT so that all future calls also
-	 end in this function.  */
-      if (__builtin_expect (profile, 0))
-	{
-	  got[2] = (Elf32_Addr) &_dl_runtime_profile;
-
-	  if (_dl_name_match_p (_dl_profile, l))
-	    /* This is the object we are looking for.  Say that we really
-	       want profiling and the timers are started.  */
-	    _dl_profile_map = l;
-	}
-      else
-	/* This function will get called to fix up the GOT entry indicated by
-	   the offset on the stack, and then jump to the resolved address.  */
-	got[2] = (Elf32_Addr) &_dl_runtime_resolve;
-    }
-
-  return lazy;
-}
-
-/* This code is used in dl-runtime.c to call the `fixup' function
-   and then redirect to the address it returns.  */
-#if !defined PROF && !__BOUNDED_POINTERS__
-# define ELF_MACHINE_RUNTIME_TRAMPOLINE asm ("\
-	.text\n\
-	.globl _dl_runtime_resolve\n\
-	.type _dl_runtime_resolve, @function\n\
-	.align 16\n\
-_dl_runtime_resolve:\n\
-	pushl %eax		# Preserve registers otherwise clobbered.\n\
-	pushl %ecx\n\
-	pushl %edx\n\
-	movl 16(%esp), %edx	# Copy args pushed by PLT in register.  Note\n\
-	movl 12(%esp), %eax	# that `fixup' takes its parameters in regs.\n\
-	call fixup		# Call resolver.\n\
-	popl %edx		# Get register content back.\n\
-	popl %ecx\n\
-	xchgl %eax, (%esp)	# Get %eax contents end store function address.\n\
-	ret $8			# Jump to function address.\n\
-	.size _dl_runtime_resolve, .-_dl_runtime_resolve\n\
-\n\
-	.globl _dl_runtime_profile\n\
-	.type _dl_runtime_profile, @function\n\
-	.align 16\n\
-_dl_runtime_profile:\n\
-	pushl %eax		# Preserve registers otherwise clobbered.\n\
-	pushl %ecx\n\
-	pushl %edx\n\
-	movl 20(%esp), %ecx	# Load return address\n\
-	movl 16(%esp), %edx	# Copy args pushed by PLT in register.  Note\n\
-	movl 12(%esp), %eax	# that `fixup' takes its parameters in regs.\n\
-	call profile_fixup	# Call resolver.\n\
-	popl %edx		# Get register content back.\n\
-	popl %ecx\n\
-	xchgl %eax, (%esp)	# Get %eax contents end store function address.\n\
-	ret $8			# Jump to function address.\n\
-	.size _dl_runtime_profile, .-_dl_runtime_profile\n\
-	.previous\n\
-");
-#else
-# define ELF_MACHINE_RUNTIME_TRAMPOLINE asm ("\n\
-	.text\n\
-	.globl _dl_runtime_resolve\n\
-	.globl _dl_runtime_profile\n\
-	.type _dl_runtime_resolve, @function\n\
-	.type _dl_runtime_profile, @function\n\
-	.align 16\n\
-_dl_runtime_resolve:\n\
-_dl_runtime_profile:\n\
-	pushl %eax		# Preserve registers otherwise clobbered.\n\
-	pushl %ecx\n\
-	pushl %edx\n\
-	movl 16(%esp), %edx	# Push the arguments for `fixup'\n\
-	movl 12(%esp), %eax\n\
-	pushl %edx\n\
-	pushl %eax\n\
-	call fixup		# Call resolver.\n\
-	popl %edx		# Pop the parameters\n\
-	popl %ecx\n\
-	popl %edx		# Get register content back.\n\
-	popl %ecx\n\
-	xchgl %eax, (%esp)	# Get %eax contents end store function address.\n\
-	ret $8			# Jump to function address.\n\
-	.size _dl_runtime_resolve, .-_dl_runtime_resolve\n\
-	.size _dl_runtime_profile, .-_dl_runtime_profile\n\
-	.previous\n\
-");
-#endif
-
-/* Mask identifying addresses reserved for the user program,
-   where the dynamic linker should not map anything.  */
-#define ELF_MACHINE_USER_ADDRESS_MASK	0xf8000000UL
-
-/* Initial entry point code for the dynamic linker.
-   The C function `_dl_start' is the real entry point;
-   its return value is the user program's entry point.  */
-
-#define RTLD_START asm ("\n\
-	.text\n\
-	.align 16\n\
-0:	movl (%esp), %ebx\n\
-	ret\n\
-	.align 16\n\
-.globl _start\n\
-.globl _dl_start_user\n\
-_start:\n\
-	pushl %esp\n\
-	call _dl_start\n\
-	popl %ebx\n\
-_dl_start_user:\n\
-	# Save the user entry point address in %edi.\n\
-	movl %eax, %edi\n\
-	# Point %ebx at the GOT.\n\
-	call 0b\n\
-	addl $_GLOBAL_OFFSET_TABLE_, %ebx\n\
-	# Store the highest stack address\n\
-	movl __libc_stack_end@GOT(%ebx), %eax\n\
-	movl %esp, (%eax)\n\
-	# See if we were run as a command with the executable file\n\
-	# name as an extra leading argument.\n\
-	movl _dl_skip_args@GOT(%ebx), %eax\n\
-	movl (%eax), %eax\n\
-	# Pop the original argument count.\n\
-	popl %edx\n\
-	# Adjust the stack pointer to skip _dl_skip_args words.\n\
-	leal (%esp,%eax,4), %esp\n\
-	# Subtract _dl_skip_args from argc.\n\
-	subl %eax, %edx\n\
-	# Push argc back on the stack.\n\
-	push %edx\n\
-	# The special initializer gets called with the stack just\n\
-	# as the application's entry point will see it; it can\n\
-	# switch stacks if it moves these contents over.\n\
-" RTLD_START_SPECIAL_INIT "\n\
-	# Load the parameters again.\n\
-	# (eax, edx, ecx, *--esp) = (_dl_loaded, argc, argv, envp)\n\
-	movl _dl_loaded@GOT(%ebx), %esi\n\
-	leal 8(%esp,%edx,4), %eax\n\
-	leal 4(%esp), %ecx\n\
-	pushl %eax\n\
-	movl (%esi), %eax\n\
-	# Call the function to run the initializers.\n\
-	call _dl_init@PLT\n\
-	# Pass our finalizer function to the user in %edx, as per ELF ABI.\n\
-	movl _dl_fini@GOT(%ebx), %edx\n\
-	# Jump to the user's entry point.\n\
-	jmp *%edi\n\
-	.previous\n\
-");
-
-#ifndef RTLD_START_SPECIAL_INIT
-#define RTLD_START_SPECIAL_INIT /* nothing */
-#endif
-
-/* ELF_RTYPE_CLASS_PLT iff TYPE describes relocation of a PLT entry, so
-   PLT entries should not be allowed to define the value.
-   ELF_RTYPE_CLASS_NOCOPY iff TYPE should not be allowed to resolve to one
-   of the main executable's symbols, as for a COPY reloc.  */
-#define elf_machine_type_class(type) \
-  ((((type) == R_386_JMP_SLOT) * ELF_RTYPE_CLASS_PLT)	\
-   | (((type) == R_386_COPY) * ELF_RTYPE_CLASS_COPY))
-
-/* A reloc type used for ld.so cmdline arg lookups to reject PLT entries.  */
-#define ELF_MACHINE_JMP_SLOT	R_386_JMP_SLOT
-
-/* The i386 never uses Elf32_Rela relocations.  */
-#define ELF_MACHINE_NO_RELA 1
-
-/* We define an initialization functions.  This is called very early in
-   _dl_sysdep_start.  */
-#define DL_PLATFORM_INIT dl_platform_init ()
-
-extern const char *_dl_platform;
-
-static inline void __attribute__ ((unused))
-dl_platform_init (void)
-{
-  if (_dl_platform != NULL && *_dl_platform == '\0')
-    /* Avoid an empty string which would disturb us.  */
-    _dl_platform = NULL;
-}
-
-static inline Elf32_Addr
-elf_machine_fixup_plt (struct link_map *map, lookup_t t,
-		       const Elf32_Rel *reloc,
-		       Elf32_Addr *reloc_addr, Elf32_Addr value)
-{
-  return *reloc_addr = value;
-}
-
-/* Return the final value of a plt relocation.  */
-static inline Elf32_Addr
-elf_machine_plt_value (struct link_map *map, const Elf32_Rel *reloc,
-		       Elf32_Addr value)
-{
-  return value;
-}
-
-#endif /* !dl_machine_h */
-
-#ifdef RESOLVE
-
-/* Perform the relocation specified by RELOC and SYM (which is fully resolved).
-   MAP is the object containing the reloc.  */
-
-static inline void
-elf_machine_rel (struct link_map *map, const Elf32_Rel *reloc,
-		 const Elf32_Sym *sym, const struct r_found_version *version,
-		 Elf32_Addr *const reloc_addr)
-{
-  const unsigned int r_type = ELF32_R_TYPE (reloc->r_info);
-
-#if !defined RTLD_BOOTSTRAP || !defined HAVE_Z_COMBRELOC
-  if (__builtin_expect (r_type == R_386_RELATIVE, 0))
-    {
-# if !defined RTLD_BOOTSTRAP && !defined HAVE_Z_COMBRELOC
-      /* This is defined in rtld.c, but nowhere in the static libc.a;
-	 make the reference weak so static programs can still link.
-	 This declaration cannot be done when compiling rtld.c
-	 (i.e. #ifdef RTLD_BOOTSTRAP) because rtld.c contains the
-	 common defn for _dl_rtld_map, which is incompatible with a
-	 weak decl in the same file.  */
-      weak_extern (_dl_rtld_map);
-      if (map != &_dl_rtld_map) /* Already done in rtld itself.  */
-# endif
-	*reloc_addr += map->l_addr;
-    }
-# ifndef RTLD_BOOTSTRAP
-  else if (__builtin_expect (r_type == R_386_NONE, 0))
-    return;
-# endif
-  else
-#endif
-    {
-#ifndef RTLD_BOOTSTRAP
-      const Elf32_Sym *const refsym = sym;
-#endif
-      Elf32_Addr value = RESOLVE (&sym, version, r_type);
-      if (sym)
-	value += sym->st_value;
-
-#ifdef RTLD_BOOTSTRAP
-      assert (r_type == R_386_GLOB_DAT || r_type == R_386_JMP_SLOT);
-      *reloc_addr = value;
-#else
-      switch (r_type)
-	{
-	case R_386_GLOB_DAT:
-	case R_386_JMP_SLOT:
-	  *reloc_addr = value;
-	  break;
-	case R_386_32:
-	  *reloc_addr += value;
-	  break;
-	case R_386_PC32:
-	  *reloc_addr += (value - (Elf32_Addr) reloc_addr);
-	  break;
-	case R_386_COPY:
-	  if (sym == NULL)
-	    /* This can happen in trace mode if an object could not be
-	       found.  */
-	    break;
-	  if (__builtin_expect (sym->st_size > refsym->st_size, 0)
-	      || (__builtin_expect (sym->st_size < refsym->st_size, 0)
-		  && _dl_verbose))
-	    {
-	      const char *strtab;
-
-	      strtab = (const char *) D_PTR (map, l_info[DT_STRTAB]);
-	      _dl_error_printf ("\
-%s: Symbol `%s' has different size in shared object, consider re-linking\n",
-				_dl_argv[0] ?: "<program name unknown>",
-				strtab + refsym->st_name);
-	    }
-	  memcpy (reloc_addr, (void *) value, MIN (sym->st_size,
-						   refsym->st_size));
-	  break;
-	default:
-	  _dl_reloc_bad_type (map, r_type, 0);
-	  break;
-	}
-#endif
-    }
-}
-
-static inline void
-elf_machine_rel_relative (Elf32_Addr l_addr, const Elf32_Rel *reloc,
-			  Elf32_Addr *const reloc_addr)
-{
-  assert (ELF32_R_TYPE (reloc->r_info) == R_386_RELATIVE);
-  *reloc_addr += l_addr;
-}
-
-static inline void
-elf_machine_lazy_rel (struct link_map *map,
-		      Elf32_Addr l_addr, const Elf32_Rel *reloc)
-{
-  Elf32_Addr *const reloc_addr = (void *) (l_addr + reloc->r_offset);
-  const unsigned int r_type = ELF32_R_TYPE (reloc->r_info);
-  /* Check for unexpected PLT reloc type.  */
-  if (__builtin_expect (r_type == R_386_JMP_SLOT, 1))
-    *reloc_addr += l_addr;
-  else
-    _dl_reloc_bad_type (map, r_type, 1);
-}
-
-#endif /* RESOLVE */
diff --git a/newlib/libc/sys/linux/machine/i386/dl-procinfo.c b/newlib/libc/sys/linux/machine/i386/dl-procinfo.c
deleted file mode 100644
index 75732b4e4..000000000
--- a/newlib/libc/sys/linux/machine/i386/dl-procinfo.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Data for Linux/i386 version of processor capability information.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 2001.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* This information must be kept in sync with the _DL_HWCAP_COUNT and
-   _DL_PLATFORM_COUNT definitions in procinfo.h.  */
-
-
-/* If anything should be added here check whether the size of each string
-   is still ok with the given array size.  */
-const char _dl_x86_cap_flags[][7] =
-  {
-    "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-    "cx8", "apic", "10", "sep", "mtrr", "pge", "mca", "cmov",
-    "pat", "pse36", "psn", "19", "20", "21", "22", "mmx",
-    "osfxsr", "xmm", "xmm2", "27", "28", "29", "30", "amd3d"
-  };
-
-const char _dl_x86_platforms[][5] =
-  {
-    "i386", "i486", "i586", "i686"
-  };
diff --git a/newlib/libc/sys/linux/machine/i386/dl-procinfo.h b/newlib/libc/sys/linux/machine/i386/dl-procinfo.h
deleted file mode 100644
index d1658fafd..000000000
--- a/newlib/libc/sys/linux/machine/i386/dl-procinfo.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* Linux/i386 version of processor capability information handling macros.
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _DL_PROCINFO_H
-#define _DL_PROCINFO_H	1
-
-#include <ldsodefs.h>
-
-/* If anything should be added here check whether the size of each string
-   is still ok with the given array size.  */
-extern const char _dl_x86_cap_flags[][7];
-#define _DL_HWCAP_COUNT 32
-
-extern const char _dl_x86_platforms[][5];
-#define _DL_PLATFORMS_COUNT	4
-
-/* Start at 48 to reserve some space.  */
-#define _DL_FIRST_PLATFORM	48
-/* Mask to filter out platforms.  */
-#define _DL_HWCAP_PLATFORM	(7ULL << _DL_FIRST_PLATFORM)
-
-
-static inline int
-__attribute__ ((unused))
-_dl_procinfo (int word)
-{
-  /* This table should match the information from arch/i386/kernel/setup.c
-     in the kernel sources.  */
-  int i;
-
-  _dl_printf ("AT_HWCAP:   ");
-
-  for (i = 0; i < _DL_HWCAP_COUNT; ++i)
-    if (word & (1 << i))
-      _dl_printf (" %s", _dl_x86_cap_flags[i]);
-
-  _dl_printf ("\n");
-
-  return 0;
-}
-
-static inline const char *
-__attribute__ ((unused))
-_dl_hwcap_string (int idx)
-{
-  return _dl_x86_cap_flags[idx];
-};
-
-static inline const char *
-__attribute__ ((unused))
-_dl_platform_string (int idx)
-{
-  return _dl_x86_platforms [idx - _DL_FIRST_PLATFORM];
-};
-
-enum
-{
-  HWCAP_I386_FPU   = 1 << 0,
-  HWCAP_I386_VME   = 1 << 1,
-  HWCAP_I386_DE    = 1 << 2,
-  HWCAP_I386_PSE   = 1 << 3,
-  HWCAP_I386_TSC   = 1 << 4,
-  HWCAP_I386_MSR   = 1 << 5,
-  HWCAP_I386_PAE   = 1 << 6,
-  HWCAP_I386_MCE   = 1 << 7,
-  HWCAP_I386_CX8   = 1 << 8,
-  HWCAP_I386_APIC  = 1 << 9,
-  HWCAP_I386_SEP   = 1 << 11,
-  HWCAP_I386_MTRR  = 1 << 12,
-  HWCAP_I386_PGE   = 1 << 13,
-  HWCAP_I386_MCA   = 1 << 14,
-  HWCAP_I386_CMOV  = 1 << 15,
-  HWCAP_I386_FCMOV = 1 << 16,
-  HWCAP_I386_MMX   = 1 << 23,
-  HWCAP_I386_OSFXSR = 1 << 24,
-  HWCAP_I386_XMM   = 1 << 25,
-  HWCAP_I386_XMM2  = 1 << 26,
-  HWCAP_I386_AMD3D = 1 << 31,
-
-  /* XXX Which others to add here?  */
-  HWCAP_IMPORTANT = (HWCAP_I386_MMX)
-
-};
-
-static inline int
-__attribute__ ((unused))
-_dl_string_hwcap (const char *str)
-{
-  int i;
-
-  for (i = 0; i < _DL_HWCAP_COUNT; i++)
-    {
-      if (strcmp (str, _dl_x86_cap_flags[i]) == 0)
-	return i;
-    }
-  return -1;
-};
-
-
-static inline int
-__attribute__ ((unused))
-_dl_string_platform (const char *str)
-{
-  int i;
-
-  if (str != NULL)
-    for (i = 0; i < _DL_PLATFORMS_COUNT; ++i)
-      {
-	if (strcmp (str, _dl_x86_platforms[i]) == 0)
-	  return _DL_FIRST_PLATFORM + i;
-      }
-  return -1;
-};
-
-#endif /* dl-procinfo.h */
diff --git a/newlib/libc/sys/linux/machine/i386/get_clockfreq.c b/newlib/libc/sys/linux/machine/i386/get_clockfreq.c
deleted file mode 100644
index ea46ed427..000000000
--- a/newlib/libc/sys/linux/machine/i386/get_clockfreq.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* Get frequency of the system processor.  i386/Linux version.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <ctype.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <libc-internal.h>
-
-static
-void *memmem (const void *a, size_t len1, const void *b, size_t len2)
-{
-  char *end, *start;
-  char *ptr1, *ptr2;
-
-  if (len2 > len1)
-    return NULL;
-
-  start = (char *)a;
-  end = start + len1;
-
-  while (start < end)
-    {
-      size_t len = len2;
-      ptr1 = start;
-      ptr2 = (char *)b;
-      while (len > 0 && *ptr1++ == *ptr2++)
-        --len;
-      if (len == 0)
-        return start;
-      ++start;
-    }
-
-  return NULL;
-} 
-
-hp_timing_t
-__get_clockfreq (void)
-{
-  /* We read the information from the /proc filesystem.  It contains at
-     least one line like
-	cpu MHz         : 497.840237
-     or also
-	cpu MHz         : 497.841
-     We search for this line and convert the number in an integer.  */
-  static hp_timing_t result;
-  int fd;
-
-  /* If this function was called before, we know the result.  */
-  if (result != 0)
-    return result;
-
-  fd = open ("/proc/cpuinfo", O_RDONLY);
-  if (__builtin_expect (fd != -1, 1))
-    {
-      /* XXX AFAIK the /proc filesystem can generate "files" only up
-         to a size of 4096 bytes.  */
-      char buf[4096];
-      ssize_t n;
-
-      n = read (fd, buf, sizeof buf);
-      if (__builtin_expect (n, 1) > 0)
-	{
-	  char *mhz = memmem (buf, n, "cpu MHz", 7);
-
-	  if (__builtin_expect (mhz != NULL, 1))
-	    {
-	      char *endp = buf + n;
-	      int seen_decpoint = 0;
-	      int ndigits = 0;
-
-	      /* Search for the beginning of the string.  */
-	      while (mhz < endp && (*mhz < '0' || *mhz > '9') && *mhz != '\n')
-		++mhz;
-
-	      while (mhz < endp && *mhz != '\n')
-		{
-		  if (*mhz >= '0' && *mhz <= '9')
-		    {
-		      result *= 10;
-		      result += *mhz - '0';
-		      if (seen_decpoint)
-			++ndigits;
-		    }
-		  else if (*mhz == '.')
-		    seen_decpoint = 1;
-
-		  ++mhz;
-		}
-
-	      /* Compensate for missing digits at the end.  */
-	      while (ndigits++ < 6)
-		result *= 10;
-	    }
-	}
-
-      close (fd);
-    }
-
-  return result;
-}
diff --git a/newlib/libc/sys/linux/machine/i386/getpagesize.c b/newlib/libc/sys/linux/machine/i386/getpagesize.c
deleted file mode 100644
index 3f80a7a38..000000000
--- a/newlib/libc/sys/linux/machine/i386/getpagesize.c
+++ /dev/null
@@ -1,6 +0,0 @@
-/* default pagesize */
-int __getpagesize ()
-{
-  return 4096;
-}
-
diff --git a/newlib/libc/sys/linux/machine/i386/hp-timing.c b/newlib/libc/sys/linux/machine/i386/hp-timing.c
deleted file mode 100644
index c52099c73..000000000
--- a/newlib/libc/sys/linux/machine/i386/hp-timing.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Support for high precision, low overhead timing functions.  i686 version.
-   Copyright (C) 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <hp-timing.h>
-
-/* We have to define the variable for the overhead.  */
-hp_timing_t __libc_hp_timing_overhead;
diff --git a/newlib/libc/sys/linux/machine/i386/hp-timing.h b/newlib/libc/sys/linux/machine/i386/hp-timing.h
deleted file mode 100644
index a34965ec8..000000000
--- a/newlib/libc/sys/linux/machine/i386/hp-timing.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/* High precision, low overhead timing functions.  i686 version.
-   Copyright (C) 1998 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib by Jeff Johnston - June 27, 2002 */
-
-#ifndef _HP_TIMING_H
-#define _HP_TIMING_H	1
-
-#include <string.h>
-#include <stdio.h>
-#include <sys/param.h>
-
-#ifdef __i686__
-
-/* The macros defined here use the timestamp counter in i586 and up versions
-   of the x86 processors.  They provide a very accurate way to measure the
-   time with very little overhead.  The time values themself have no real
-   meaning, only differences are interesting.
-
-   This version is for the i686 processors.  The difference to the i586
-   version is that the timerstamp register is unconditionally used.  This is
-   not the case for the i586 version where we have to perform runtime test
-   whether the processor really has this capability.  We have to make this
-   distinction since the sysdeps/i386/i586 code is supposed to work on all
-   platforms while the i686 already contains i686-specific code.
-
-   The list of macros we need includes the following:
-
-   - HP_TIMING_AVAIL: test for availability.
-
-   - HP_TIMING_INLINE: this macro is non-zero if the functionality is not
-     implemented using function calls but instead uses some inlined code
-     which might simply consist of a few assembler instructions.  We have to
-     know this since we might want to use the macros here in places where we
-     cannot make function calls.
-
-   - hp_timing_t: This is the type for variables used to store the time
-     values.
-
-   - HP_TIMING_ZERO: clear `hp_timing_t' object.
-
-   - HP_TIMING_NOW: place timestamp for current time in variable given as
-     parameter.
-
-   - HP_TIMING_DIFF_INIT: do whatever is necessary to be able to use the
-     HP_TIMING_DIFF macro.
-
-   - HP_TIMING_DIFF: compute difference between two times and store it
-     in a third.  Source and destination might overlap.
-
-   - HP_TIMING_ACCUM: add time difference to another variable.  This might
-     be a bit more complicated to implement for some platforms as the
-     operation should be thread-safe and 64bit arithmetic on 32bit platforms
-     is not.
-
-   - HP_TIMING_ACCUM_NT: this is the variant for situations where we know
-     there are no threads involved.
-
-   - HP_TIMING_PRINT: write decimal representation of the timing value into
-     the given string.  This operation need not be inline even though
-     HP_TIMING_INLINE is specified.
-
-*/
-
-/* We always assume having the timestamp register.  */
-#define HP_TIMING_AVAIL		(1)
-
-/* We indeed have inlined functions.  */
-#define HP_TIMING_INLINE	(1)
-
-/* We use 64bit values for the times.  */
-typedef unsigned long long int hp_timing_t;
-
-/* Internal variable used to store the overhead of the measurement
-   opcodes.  */
-extern hp_timing_t __libc_hp_timing_overhead;
-
-/* Set timestamp value to zero.  */
-#define HP_TIMING_ZERO(Var)	(Var) = (0)
-
-/* That's quite simple.  Use the `rdtsc' instruction.  Note that the value
-   might not be 100% accurate since there might be some more instructions
-   running in this moment.  This could be changed by using a barrier like
-   'cpuid' right before the `rdtsc' instruciton.  But we are not interested
-   in accurate clock cycles here so we don't do this.  */
-#define HP_TIMING_NOW(Var)	__asm__ __volatile__ ("rdtsc" : "=A" (Var))
-
-/* Use two 'rdtsc' instructions in a row to find out how long it takes.  */
-#define HP_TIMING_DIFF_INIT() \
-  do {									      \
-    int __cnt = 5;							      \
-    __libc_hp_timing_overhead = ~0ull;					      \
-    do									      \
-      {									      \
-	hp_timing_t __t1, __t2;						      \
-	HP_TIMING_NOW (__t1);						      \
-	HP_TIMING_NOW (__t2);						      \
-	if (__t2 - __t1 < __libc_hp_timing_overhead)			      \
-	  __libc_hp_timing_overhead = __t2 - __t1;			      \
-      }									      \
-    while (--__cnt > 0);						      \
-  } while (0)
-
-/* It's simple arithmetic for us.  */
-#define HP_TIMING_DIFF(Diff, Start, End)	(Diff) = ((End) - (Start))
-
-/* We have to jump through hoops to get this correctly implemented.  */
-#define HP_TIMING_ACCUM(Sum, Diff) \
-  do {									      \
-    char __not_done;							      \
-    hp_timing_t __oldval = (Sum);					      \
-    hp_timing_t __diff = (Diff) - __libc_hp_timing_overhead;		      \
-    do									      \
-      {									      \
-	hp_timing_t __newval = __oldval + __diff;			      \
-	int __temp0, __temp1;						      \
-	__asm__ __volatile__ ("xchgl %4, %%ebx\n\t"			      \
-			      "lock; cmpxchg8b %1\n\t"			      \
-			      "sete %0\n\t"				      \
-			      "movl %4, %%ebx"				      \
-			      : "=q" (__not_done), "=m" (Sum),		      \
-				"=A" (__oldval), "=c" (__temp0),	      \
-				"=SD" (__temp1)				      \
-			      : "1" (Sum), "2" (__oldval),		      \
-				"3" (__newval >> 32),			      \
-				"4" (__newval & 0xffffffff)		      \
-			      : "memory");				      \
-      }									      \
-    while (__not_done);							      \
-  } while (0)
-
-/* No threads, no extra work.  */
-#define HP_TIMING_ACCUM_NT(Sum, Diff)	(Sum) += (Diff)
-
-/* Print the time value.  */
-#define HP_TIMING_PRINT(Buf, Len, Val) \
-  do {									      \
-    char __buf[20];							      \
-    char *__cp = __buf + sizeof (__buf);				      \
-    int __len = (Len);							      \
-    char *__dest = (Buf);						      \
-    do { 								      \
-      *--__cp = Val % 10;						      \
-      Val /= 10;							      \
-    } while (Val > 0);							      \
-    while (__len-- > 0 && __cp < __buf + sizeof (__buf))		      \
-      *__dest++ = *__cp++;						      \
-    memcpy (__dest, " clock cycles", MIN (__len, sizeof (" clock cycles")));  \
-  } while (0)
-
-#else /* !__i686__ */
-
-/* Provide dummy definitions.  */
-#define HP_TIMING_AVAIL         (0)
-#define HP_TIMING_INLINE        (0)
-typedef int hp_timing_t;
-#define HP_TIMING_ZERO(Var)
-#define HP_TIMING_NOW(var)
-#define HP_TIMING_DIFF_INIT()
-#define HP_TIMING_DIFF(Diff, Start, End)
-#define HP_TIMING_ACCUM(Sum, Diff)
-#define HP_TIMING_ACCUM_NT(Sum, Diff)
-#define HP_TIMING_PRINT(Buf, Len, Val)
-
-/* Since this implementation is not available we tell the user about it.  */
-#define HP_TIMING_NONAVAIL      1
-
-#endif
-
-#endif	/* hp-timing.h */
diff --git a/newlib/libc/sys/linux/machine/i386/huge_val.h b/newlib/libc/sys/linux/machine/i386/huge_val.h
deleted file mode 100644
index 171517710..000000000
--- a/newlib/libc/sys/linux/machine/i386/huge_val.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* `HUGE_VAL' constants for ix86 (where it is infinity).
-   Used by <stdlib.h> and <math.h> functions for overflow.
-   Copyright (C) 1992, 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <features.h>
-
-/* ISO C99 extensions: (float) HUGE_VALF and (long double) HUGE_VALL.  */
-
-# if __GNUC_PREREQ(2,96)
-
-#  define HUGE_VALF (__extension__ 0x1.0p255f)
-#  define HUGE_VALL (__extension__ 0x1.0p32767L)
-
-# else
-
-#  define __HUGE_VALF_bytes	{ 0, 0, 0x80, 0x7f }
-
-#  define __huge_valf_t	union { unsigned char __c[4]; float __f; }
-#  ifdef	__GNUC__
-#   define HUGE_VALF	(__extension__ \
-			 ((__huge_valf_t) { __c: __HUGE_VALF_bytes }).__f)
-#  else	/* Not GCC.  */
-static __huge_valf_t __huge_valf = { __HUGE_VALF_bytes };
-#   define HUGE_VALF	(__huge_valf.__f)
-#  endif	/* GCC.  */
-
-
-#  define __HUGE_VALL_bytes	{ 0, 0, 0, 0, 0, 0, 0, 0x80, 0xff, 0x7f, 0, 0 }
-
-#  define __huge_vall_t	union { unsigned char __c[12]; long double __ld; }
-#  ifdef __GNUC__
-#   define HUGE_VALL	(__extension__ \
-			 ((__huge_vall_t) { __c: __HUGE_VALL_bytes }).__ld)
-#  else	/* Not GCC.  */
-static __huge_vall_t __huge_vall = { __HUGE_VALL_bytes };
-#   define HUGE_VALL	(__huge_vall.__ld)
-#  endif /* GCC.  */
-
-# endif /* GCC 2.95 */
-
diff --git a/newlib/libc/sys/linux/machine/i386/i386mach.h b/newlib/libc/sys/linux/machine/i386/i386mach.h
deleted file mode 100644
index 23c32190d..000000000
--- a/newlib/libc/sys/linux/machine/i386/i386mach.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*  This file was based on the modified setjmp.S performed by
- *  Joel Sherill (joel@OARcorp.com) which specified the use
- *  of the __USER_LABEL_PREFIX__ and __REGISTER_PREFIX__ macros.
- **
- ** This file is distributed WITHOUT ANY WARRANTY; without even the implied
- ** warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* These are predefined by new versions of GNU cpp.  */
- 
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#define __REG_PREFIX__ %
- 
-/* ANSI concatenation macros.  */
- 
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a##b
- 
-/* Use the right prefix for global labels.  */
- 
-#define SYM(x) CONCAT1(__USER_LABEL_PREFIX__, x)
- 
-/* Use the right prefix for registers.  */
- 
-#define REG(x) CONCAT1(__REG_PREFIX__, x)
- 
-#define eax REG(eax)
-#define ebx REG(ebx)
-#define ecx REG(ecx)
-#define edx REG(edx)
-#define esi REG(esi)
-#define edi REG(edi)
-#define ebp REG(ebp)
-#define esp REG(esp)
-
-#define st0 REG(st)
-#define st1 REG(st(1))
-#define st2 REG(st(2))
-#define st3 REG(st(3))
-#define st4 REG(st(4))
-#define st5 REG(st(5))
-#define st6 REG(st(6))
-#define st7 REG(st(7))
-
-#define ax REG(ax)
-#define bx REG(bx)
-#define cx REG(cx)
-#define dx REG(dx)
-
-#define ah REG(ah)
-#define bh REG(bh)
-#define ch REG(ch)
-#define dh REG(dh)
-
-#define al REG(al)
-#define bl REG(bl)
-#define cl REG(cl)
-#define dl REG(dl)
-
-#define mm1 REG(mm1)
-#define mm2 REG(mm2)
-#define mm3 REG(mm3)
-#define mm4 REG(mm4)
-#define mm5 REG(mm5)
-#define mm6 REG(mm6)
-#define mm7 REG(mm7)
-
-#ifdef _I386MACH_NEED_SOTYPE_FUNCTION
-#define SOTYPE_FUNCTION(sym) .type SYM(sym),@function
-#else
-#define SOTYPE_FUNCTION(sym)
-#endif
-
-#ifdef _I386MACH_ALLOW_HW_INTERRUPTS
-#define        __CLI
-#define        __STI
-#else
-#define __CLI  cli
-#define __STI  sti
-#endif
diff --git a/newlib/libc/sys/linux/machine/i386/include/endian.h b/newlib/libc/sys/linux/machine/i386/include/endian.h
deleted file mode 100644
index aa9cd90a3..000000000
--- a/newlib/libc/sys/linux/machine/i386/include/endian.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (c) 1987, 1991 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      from: @(#)endian.h      7.8 (Berkeley) 4/3/91
- *      $Id$
- */
-
-#ifndef _MACHINE_ENDIAN_H_
-#define _MACHINE_ENDIAN_H_
-
-/*
- * Define the order of 32-bit words in 64-bit words.
- */
-#define _QUAD_HIGHWORD 1
-#define _QUAD_LOWWORD 0
-
-/*
- * Definitions for byte order, according to byte significance from low
- * address to high.
- */
-#define LITTLE_ENDIAN   1234    /* LSB first: i386, vax */
-#define BIG_ENDIAN      4321    /* MSB first: 68000, ibm, net */
-#define PDP_ENDIAN      3412    /* LSB first in word, MSW first in long */
-
-#define BYTE_ORDER      LITTLE_ENDIAN
-
-#ifndef KERNEL
-#include <sys/cdefs.h>
-#endif
-
-#include <sys/types.h>
-
-__BEGIN_DECLS
-unsigned long   htonl __P((unsigned long));
-unsigned short  htons __P((unsigned short));
-unsigned long   ntohl __P((unsigned long));
-unsigned short  ntohs __P((unsigned short));
-__END_DECLS
-
-#define __word_swap_long(x) \
-__extension__ ({ register u_long __X = (x); \
-   __asm ("rorl $16, %1" \
-        : "=r" (__X) \
-        : "0" (__X)); \
-   __X; })
-
-#if defined(KERNEL) && (defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)) && !defined(I386_CPU)
-
-#define __byte_swap_long(x) \
-__extension__ ({ register u_long __X = (x); \
-   __asm ("bswap %0" \
-        : "=r" (__X) \
-        : "0" (__X)); \
-   __X; })
-#else
-
-#define __byte_swap_long(x) \
-__extension__ ({ register u_long __X = (x); \
-   __asm ("xchgb %h1, %b1\n\trorl $16, %1\n\txchgb %h1, %b1" \
-        : "=q" (__X) \
-        : "0" (__X)); \
-   __X; })
-#endif
-
-#define __byte_swap_word(x) \
-__extension__ ({ register u_short __X = (x); \
-   __asm ("xchgb %h1, %b1" \
-        : "=q" (__X) \
-        : "0" (__X)); \
-   __X; })
-
-/*
- * Macros for network/external number representation conversion.
- */
-#ifdef __GNUC__
-#define ntohl   __byte_swap_long
-#define ntohs   __byte_swap_word
-#define htonl   __byte_swap_long
-#define htons   __byte_swap_word
-#endif
-
-#define NTOHL(x)        ((x) = ntohl((u_long)(x)))
-#define NTOHS(x)        ((x) = ntohs((u_short)(x)))
-#define HTONL(x)        ((x) = htonl((u_long)(x)))
-#define HTONS(x)        ((x) = htons((u_short)(x)))
-
-#endif /* !_MACHINE_ENDIAN_H_ */
diff --git a/newlib/libc/sys/linux/machine/i386/include/param.h b/newlib/libc/sys/linux/machine/i386/include/param.h
deleted file mode 100644
index fbe1be2ac..000000000
--- a/newlib/libc/sys/linux/machine/i386/include/param.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * William Jolitz.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	from: @(#)param.h	5.8 (Berkeley) 6/28/91
- * $FreeBSD: src/sys/i386/include/param.h,v 1.62 2001/09/12 08:37:33 julian Exp $
- */
-
-/*
- * Machine dependent constants for Intel 386.
- */
-
-#ifndef _MACHINE_PARAM_H_
-#define	_MACHINE_PARAM_H_
-
-#ifndef MACHINE
-#define MACHINE		"i386"
-#endif
-#ifndef MACHINE_ARCH
-#define	MACHINE_ARCH	"i386"
-#endif
-#define MID_MACHINE	MID_I386
-
-/* Endian-ness */
-#ifndef BIG_ENDIAN
-#define BIG_ENDIAN	4321
-#endif
-#ifndef LITTLE_ENDIAN
-#define LITTLE_ENDIAN	1234
-#endif
-
-#define BYTE_ORDER	LITTLE_ENDIAN
-
-/*
- * OBJFORMAT_NAMES is a comma-separated list of the object formats
- * that are supported on the architecture.
- */
-#define OBJFORMAT_NAMES		"elf", "aout"
-#define OBJFORMAT_DEFAULT	"elf"
-
-#define MAXHOSTNAMELEN 64
-
-#ifdef SMP
-#define MAXCPU		16
-#else
-#define MAXCPU		1
-#endif /* SMP */
-
-#define ALIGNBYTES	_ALIGNBYTES
-#define ALIGN(p)	_ALIGN(p)
-
-#define NPTEPG		(PAGE_SIZE/(sizeof (pt_entry_t)))
-
-#define NPDEPG		(PAGE_SIZE/(sizeof (pd_entry_t)))
-#define PDRSHIFT	22		/* LOG2(NBPDR) */
-#define NBPDR		(1<<PDRSHIFT)	/* bytes/page dir */
-#define PDRMASK		(NBPDR-1)
-
-#define DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
-#define DEV_BSIZE	(1<<DEV_BSHIFT)
-
-#ifndef BLKDEV_IOSIZE
-#define BLKDEV_IOSIZE	PAGE_SIZE	/* default block device I/O size */
-#endif
-#define DFLTPHYS	(64 * 1024)	/* default max raw I/O transfer size */
-#define MAXPHYS		(128 * 1024)	/* max raw I/O transfer size */
-#define MAXDUMPPGS	(DFLTPHYS/PAGE_SIZE)
-
-#define IOPAGES	2		/* pages of i/o permission bitmap */
-
-#ifndef KSTACK_PAGES
-#define KSTACK_PAGES 2		/* Includes pcb! */
-#endif
-#define UAREA_PAGES 1		/* holds struct user WITHOUT PCB (see def.) */
-
-#define KSTACK_GUARD		/* compile in the kstack guard page */
-
-/*
- * Ceiling on amount of swblock kva space.
- */
-#ifndef VM_SWZONE_SIZE_MAX
-#define VM_SWZONE_SIZE_MAX	(70 * 1024 * 1024)
-#endif
-
-/*
- * Ceiling on size of buffer cache (really only effects write queueing,
- * the VM page cache is not effected).
- */
-#ifndef VM_BCACHE_SIZE_MAX
-#define VM_BCACHE_SIZE_MAX	(200 * 1024 * 1024)
-#endif
-
-
-/*
- * Constants related to network buffer management.
- * MCLBYTES must be no larger than PAGE_SIZE.
- */
-#ifndef	MSIZE
-#define MSIZE		256		/* size of an mbuf */
-#endif	/* MSIZE */
-
-#ifndef	MCLSHIFT
-#define MCLSHIFT	11		/* convert bytes to mbuf clusters */
-#endif	/* MCLSHIFT */
-#define MCLBYTES	(1 << MCLSHIFT)	/* size of an mbuf cluster */
-
-/*
- * Some macros for units conversion
- */
-
-/* clicks to bytes */
-#define ctob(x)	((x)<<PAGE_SHIFT)
-
-/* bytes to clicks */
-#define btoc(x)	(((unsigned)(x)+PAGE_MASK)>>PAGE_SHIFT)
-
-/*
- * btodb() is messy and perhaps slow because `bytes' may be an off_t.  We
- * want to shift an unsigned type to avoid sign extension and we don't
- * want to widen `bytes' unnecessarily.  Assume that the result fits in
- * a daddr_t.
- */
-#define btodb(bytes)	 		/* calculates (bytes / DEV_BSIZE) */ \
-	(sizeof (bytes) > sizeof(long) \
-	 ? (daddr_t)((unsigned long long)(bytes) >> DEV_BSHIFT) \
-	 : (daddr_t)((unsigned long)(bytes) >> DEV_BSHIFT))
-
-#define dbtob(db)			/* calculates (db * DEV_BSIZE) */ \
-	((off_t)(db) << DEV_BSHIFT)
-
-/*
- * Mach derived conversion macros
- */
-#define trunc_page(x)		((x) & ~PAGE_MASK)
-#define round_page(x)		(((x) + PAGE_MASK) & ~PAGE_MASK)
-#define trunc_4mpage(x)		((unsigned)(x) & ~PDRMASK)
-#define round_4mpage(x)		((((unsigned)(x)) + PDRMASK) & ~PDRMASK)
-
-#define atop(x)			((unsigned)(x) >> PAGE_SHIFT)
-#define ptoa(x)			((unsigned)(x) << PAGE_SHIFT)
-
-#define i386_btop(x)		((unsigned)(x) >> PAGE_SHIFT)
-#define i386_ptob(x)		((unsigned)(x) << PAGE_SHIFT)
-
-#define	pgtok(x)		((x) * (PAGE_SIZE / 1024))
-
-#endif /* !_MACHINE_PARAM_H_ */
diff --git a/newlib/libc/sys/linux/machine/i386/include/setjmp.h b/newlib/libc/sys/linux/machine/i386/include/setjmp.h
deleted file mode 100644
index f080c3d9f..000000000
--- a/newlib/libc/sys/linux/machine/i386/include/setjmp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#define _JBLEN	9
-typedef	long __jmp_buf[_JBLEN];
-
-#define SP_INDEX 7
-#define _JMPBUF_UNWINDS(buf, address) \
-  ((void *)(address) < (void *)(buf)[SP_INDEX])
diff --git a/newlib/libc/sys/linux/machine/i386/include/termios.h b/newlib/libc/sys/linux/machine/i386/include/termios.h
deleted file mode 100644
index ffbbed8ce..000000000
--- a/newlib/libc/sys/linux/machine/i386/include/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#define __MAX_BAUD B4000000
diff --git a/newlib/libc/sys/linux/machine/i386/setjmp.S b/newlib/libc/sys/linux/machine/i386/setjmp.S
deleted file mode 100644
index d276f55fb..000000000
--- a/newlib/libc/sys/linux/machine/i386/setjmp.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/* This is file is a merger of SETJMP.S and LONGJMP.S */
-/*
- *  This file was modified to use the __USER_LABEL_PREFIX__ and
- *  __REGISTER_PREFIX__ macros defined by later versions of GNU cpp by
- *  Joel Sherrill (joel@OARcorp.com)
- *  Slight change: now includes i386mach.h for this (Werner Almesberger)
- *
- * Copyright (C) 1991 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
- /*
- **	jmp_buf:
- **	 eax ebx ecx edx esi edi ebp esp eip
- **	 0   4   8   12  16  20  24  28  32
- */
-
-       #include "i386mach.h"
-
-        .global SYM (setjmp)
-        .global SYM (__libc_longjmp)
-        .weak SYM (longjmp)
-       SOTYPE_FUNCTION(setjmp)
-       SOTYPE_FUNCTION(longjmp)
-       SOTYPE_FUNCTION(__libc_longjmp)
- 
-SYM (setjmp):
-
-	pushl	ebp
-	movl	esp,ebp
-
-	pushl	edi
-	movl	8 (ebp),edi
-
-	movl	eax,0 (edi)
-	movl	ebx,4 (edi)
-	movl	ecx,8 (edi)
-	movl	edx,12 (edi)
-	movl	esi,16 (edi)
-
-	movl	-4 (ebp),eax
-	movl	eax,20 (edi)
-
-	movl	0 (ebp),eax
-	movl	eax,24 (edi)
-
-	movl	esp,eax
-	addl	$12,eax
-	movl	eax,28 (edi)
-	
-	movl	4 (ebp),eax
-	movl	eax,32 (edi)
-
-	popl	edi
-	movl	$0,eax
-	leave
-	ret
-
-SYM (__libc_longjmp):
-SYM (longjmp):
-	.weak longjmp
-	pushl	ebp
-	movl	esp,ebp
-
-	movl	8(ebp),edi	/* get jmp_buf */
-	movl	12(ebp),eax	/* store retval in j->eax */
-	movl	eax,0(edi)
-
-	movl	24(edi),ebp
-
-       __CLI
-	movl	28(edi),esp
-	
-	pushl	32(edi)	
-
-	movl	0(edi),eax
-	movl	4(edi),ebx
-	movl	8(edi),ecx
-	movl	12(edi),edx
-	movl	16(edi),esi
-	movl	20(edi),edi
-       __STI
-
-	ret
diff --git a/newlib/libc/sys/linux/machine/i386/sigaction.c b/newlib/libc/sys/linux/machine/i386/sigaction.c
deleted file mode 100644
index 6edcb0ae7..000000000
--- a/newlib/libc/sys/linux/machine/i386/sigaction.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* POSIX.1 `sigaction' call for Linux/i386.
-   Copyright (C) 1991, 95, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <stddef.h>
-#include <signal.h>
-#include <string.h>
-
-#include <machine/syscall.h>
-
-/* The difference here is that the sigaction structure used in the
-   kernel is not the same as we use in the libc.  Therefore we must
-   translate it here.  */
-#include <kernel_sigaction.h>
-
-/* We do not globally define the SA_RESTORER flag so do it here.  */
-#define SA_RESTORER 0x04000000
-
-#define __NR___rt_sigaction __NR_rt_sigaction
-
-static _syscall4(int,__rt_sigaction,int,sig,const struct kernel_sigaction *,act,
-                 struct kernel_sigaction *,oact,size_t,size)
-
-static void restore_rt (void) asm ("__restore_rt");
-static void restore (void) asm ("__restore");
-
-/* If ACT is not NULL, change the action for SIG to *ACT.
-   If OACT is not NULL, put the old action for SIG in *OACT.  */
-int
-__libc_sigaction (int sig, const struct sigaction *act, struct sigaction *oact)
-{
-  int result;
-  struct kernel_sigaction kact, koact;
-
-  if (act)
-    {
-      kact.k_sa_handler = act->sa_handler;
-      memcpy (&kact.sa_mask, &act->sa_mask, sizeof (sigset_t));
-      kact.sa_flags = act->sa_flags | SA_RESTORER;
-
-      kact.sa_restorer = ((act->sa_flags & SA_SIGINFO)
-                          ? &restore_rt : &restore);
-    }
-
-  /* XXX The size argument hopefully will have to be changed to the
-  real size of the user-level sigset_t.  */
-  result = __rt_sigaction(sig, act ? (&kact) : NULL,
-                          oact ? (&koact) : NULL, _NSIG / 8);
-
-  if (oact && result >= 0)
-    {
-      oact->sa_handler = koact.k_sa_handler;
-      memcpy (&oact->sa_mask, &koact.sa_mask, sizeof (sigset_t));
-      oact->sa_flags = koact.sa_flags;
-      oact->sa_restorer = koact.sa_restorer;
-    }
-  return result;
-}
-
-weak_alias (__libc_sigaction, __sigaction)
-weak_alias (__libc_sigaction, sigaction)
-
-/* NOTE: Please think twice before making any changes to the bits of
-   code below.  GDB needs some intimate knowledge about it to
-   recognize them as signal trampolines, and make backtraces through
-   signal handlers work right.  Important are both the names
-   (__restore and __restore_rt) and the exact instruction sequence.
-   If you ever feel the need to make any changes, please notify the
-   appropriate GDB maintainer.  */
-
-#define RESTORE(name, syscall) RESTORE2 (name, syscall)
-#define RESTORE2(name, syscall) \
-asm						\
-  (						\
-   ".text\n"					\
-   "	.align 16\n"				\
-   "__" #name ":\n"				\
-   "	movl $" #syscall ", %eax\n"		\
-   "	int  $0x80"				\
-   );
-
-/* The return code for realtime-signals.  */
-RESTORE (restore_rt, __NR_rt_sigreturn)
-
-/* For the boring old signals.  */
-# undef RESTORE2
-# define RESTORE2(name, syscall) \
-asm						\
-  (						\
-   ".text\n"					\
-   "	.align 8\n"				\
-   "__" #name ":\n"				\
-   "	popl %eax\n"				\
-   "	movl $" #syscall ", %eax\n"		\
-   "	int  $0x80"				\
-   );
-
-RESTORE (restore, __NR_sigreturn)
diff --git a/newlib/libc/sys/linux/machine/i386/sigstack.h b/newlib/libc/sys/linux/machine/i386/sigstack.h
deleted file mode 100644
index fe6d2d10d..000000000
--- a/newlib/libc/sys/linux/machine/i386/sigstack.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _SIGSTACK_H
-
-#define _SIGSTACK_H
-
-#include <stddef.h>
-
-typedef struct sigaltstack
-  {
-    void *ss_sp;
-    int ss_flags;
-    size_t ss_size;
-  } stack_t;
-
-#endif /* _SIGSTACK_H */
diff --git a/newlib/libc/sys/linux/machine/i386/socketcall.h b/newlib/libc/sys/linux/machine/i386/socketcall.h
deleted file mode 100644
index 07908767f..000000000
--- a/newlib/libc/sys/linux/machine/i386/socketcall.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* libc/sys/linux/machine/i386/socketcall.h - x86 linux socket system calls */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#ifndef _SOCKETCALL_H
-
-#define _SOCKETCALL_H 
-
-#include <machine/weakalias.h>
-#include <sys/errno.h>
-#include <asm/unistd.h>
-#include "sockops.h"
-
-/*
- * PIC uses %ebx, so we need to save it during system calls
- */
-
-#define __sockcall_base(type, name) \
-{ \
-long __res; \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; lea 8(%%ebp),%%ecx; int $0x80; pop %%ebx" \
-	: "=a" (__res) \
-	: "0" (__NR_socketcall),"r" (SOCK_##name)); \
-__syscall_return(type,__res); \
-}
-
-#undef _sockcall1
-#define _sockcall1(type,name,type1,arg1) \
-type __libc_##name(type1 arg1) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#undef _sockcall2
-#define _sockcall2(type,name,type1,arg1,type2,arg2) \
-type __libc_##name(type1 arg1, type2 arg2) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#undef _sockcall3
-#define _sockcall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
-type __libc_##name(type1 arg1, type2 arg2, type3 arg3) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#undef _sockcall4
-#define _sockcall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-type __libc_##name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#undef _sockcall5
-#define _sockcall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
-type __libc_##name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#undef _sockcall6
-#define _sockcall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
-type __libc_##name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
-__sockcall_base(type,name) \
-weak_alias(__libc_##name,name)
-
-#endif /* _SOCKETCALL_H */
diff --git a/newlib/libc/sys/linux/machine/i386/syscall.h b/newlib/libc/sys/linux/machine/i386/syscall.h
deleted file mode 100644
index 380f1bcdf..000000000
--- a/newlib/libc/sys/linux/machine/i386/syscall.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* libc/sys/linux/machine/i386/syscall.h - x86 linux system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef SYSCALL_H
-
-#include <machine/weakalias.h>
-#include <sys/errno.h>
-#include <asm/unistd.h>
-
-
-/*
- * Note: several system calls are for SysV or BSD compatibility, or are
- * specific Linuxisms. Most of those system calls are not implemented in
- * this library.
- */
-
-
-#if defined(__PIC__) && defined(__i386__)
-
-/*
- * PIC uses %ebx, so we need to save it during system calls
- */
-
-#undef __inline_syscall0
-#define __inline_syscall0(name,ret) \
-__asm__ volatile ("int $0x80" \
-	: "=a" (ret) \
-	: "0" (__NR_##name));
-
-#undef __inline_syscall1
-#define __inline_syscall1(name,ret,arg1) \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name),"r" ((long)(arg1)));
-
-#undef __inline_syscall2
-#define __inline_syscall2(name,ret,arg1,arg2) \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name),"r" ((long)(arg1)),"c" ((long)(arg2)));
-
-#undef __inline_syscall3
-#define __inline_syscall3(name,ret,arg1,arg2,arg3) \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name),"r" ((long)(arg1)),"c" ((long)(arg2)), \
-		"d" ((long)(arg3)));
-
-#undef __inline_syscall4
-#define __inline_syscall4(name,ret,arg1,arg2,arg3,arg4) \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name),"r" ((long)(arg1)),"c" ((long)(arg2)), \
-	  "d" ((long)(arg3)),"S" ((long)(arg4)));
-
-#undef __inline_syscall5
-#define __inline_syscall5(name,ret,arg1,arg2,arg3,arg4,arg5) \
-__asm__ volatile ("push %%ebx; movl %2,%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name),"m" ((long)(arg1)),"c" ((long)(arg2)), \
-	  "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5)));
-
-#undef __inline_syscall6
-#define __inline_syscall6(name,ret,arg1,arg2,arg3,arg4,arg5,arg6) \
-__asm__ volatile ("push %%ebx; lea 8(%%ebp),%%ebx; int $0x80; pop %%ebx" \
-	: "=a" (ret) \
-	: "0" (__NR_##name));
-
-#undef _syscall0_base
-#define _syscall0_base(type,name) \
-type __libc_##name (void) \
-{ \
-long __res; \
-__inline_syscall0(name,__res) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall0
-#define _syscall0(type,name) \
-_syscall0_base(type,name) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall1_base
-#define _syscall1_base(type,name,type1,arg1) \
-type __libc_##name (type1 arg1) \
-{ \
-long __res; \
-__inline_syscall1(name,__res,arg1) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall1
-#define _syscall1(type,name,type1,arg1) \
-_syscall1_base(type,name,type1,arg1) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall2_base
-#define _syscall2_base(type,name,type1,arg1,type2,arg2) \
-type __libc_##name (type1 arg1,type2 arg2) \
-{ \
-long __res; \
-__inline_syscall2(name,__res,arg1,arg2) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall2
-#define _syscall2(type,name,type1,arg1,type2,arg2) \
-_syscall2_base(type,name,type1,arg1,type2,arg2) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall3_base
-#define _syscall3_base(type,name,type1,arg1,type2,arg2,type3,arg3) \
-type __libc_##name (type1 arg1,type2 arg2,type3 arg3) \
-{ \
-long __res; \
-__inline_syscall3(name,__res,arg1,arg2,arg3) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall3
-#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
-_syscall3_base(type,name,type1,arg1,type2,arg2,type3,arg3) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall4_base
-#define _syscall4_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-type __libc_##name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
-{ \
-long __res; \
-__inline_syscall4(name,__res,arg1,arg2,arg3,arg4) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall4
-#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-_syscall4_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall5_base
-#define _syscall5_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
-          type5,arg5) \
-type __libc_##name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
-{ \
-long __res; \
-__inline_syscall5(name,__res,arg1,arg2,arg3,arg4,arg5) \
-__syscall_return(type,__res); \
-} \
-
-#undef _syscall5
-#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
-          type5,arg5) \
-_syscall5_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
-weak_alias(__libc_##name,name);
-
-#undef _syscall6_base
-#define _syscall6_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
-          type5,arg5,type6,arg6) \
-type __libc_##name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \
-{ \
-long __res; \
-__inline_syscall6(name,__res,arg1,arg2,arg3,arg4,arg5,arg6) \
-__syscall_return(type,__res); \
-}
-
-#undef _syscall6
-#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
-          type5,arg5,type6,arg6) \
-_syscall6_base(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
-weak_alias(__libc_##name,name);
-
-#endif /* __PIC__ && __i386__ */
-
-#endif /* SYSCALL_H */
diff --git a/newlib/libc/sys/linux/machine/i386/sysdep.h b/newlib/libc/sys/linux/machine/i386/sysdep.h
deleted file mode 100644
index 42becb3fd..000000000
--- a/newlib/libc/sys/linux/machine/i386/sysdep.h
+++ /dev/null
@@ -1 +0,0 @@
-#define NO_UNDERSCORES
diff --git a/newlib/libc/sys/linux/machine/i386/weakalias.h b/newlib/libc/sys/linux/machine/i386/weakalias.h
deleted file mode 100644
index 7b0b18a48..000000000
--- a/newlib/libc/sys/linux/machine/i386/weakalias.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#define weak_alias(name, aliasname) \
-  extern __typeof (name) aliasname __attribute__ ((weak, alias (#name)));
-
-#define weak_extern(symbol) _weak_extern (symbol)
-#define _weak_extern(symbol) asm (".weak " #symbol);
-
-#define weak_function __attribute__ ((weak))
-
diff --git a/newlib/libc/sys/linux/malign.c b/newlib/libc/sys/linux/malign.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/malign.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/malignr.c b/newlib/libc/sys/linux/malignr.c
deleted file mode 100644
index 5b2e14ae4..000000000
--- a/newlib/libc/sys/linux/malignr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void *
-_memalign_r (struct _reent *ptr, size_t alignment, size_t bytes)
-{
-  return memalign (alignment, bytes);
-}
diff --git a/newlib/libc/sys/linux/mallinfor.c b/newlib/libc/sys/linux/mallinfor.c
deleted file mode 100644
index a2ee627bc..000000000
--- a/newlib/libc/sys/linux/mallinfor.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <malloc.h>
-
-struct mallinfo
-_mallinfo_r (struct _reent *ptr)
-{
-  return mallinfo ();
-}
diff --git a/newlib/libc/sys/linux/malloc.c b/newlib/libc/sys/linux/malloc.c
deleted file mode 100644
index 25007e889..000000000
--- a/newlib/libc/sys/linux/malloc.c
+++ /dev/null
@@ -1,5082 +0,0 @@
-/* Malloc implementation for multiple threads without lock contention.
-   Copyright (C) 1996-2001, 2002 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>
-   and Doug Lea <dl@cs.oswego.edu>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* $Id$
-
-  This work is mainly derived from malloc-2.6.4 by Doug Lea
-  <dl@cs.oswego.edu>, which is available from:
-
-                 ftp://g.oswego.edu/pub/misc/malloc.c
-
-  Most of the original comments are reproduced in the code below.
-
-* Why use this malloc?
-
-  This is not the fastest, most space-conserving, most portable, or
-  most tunable malloc ever written. However it is among the fastest
-  while also being among the most space-conserving, portable and tunable.
-  Consistent balance across these factors results in a good general-purpose
-  allocator. For a high-level description, see
-     http://g.oswego.edu/dl/html/malloc.html
-
-  On many systems, the standard malloc implementation is by itself not
-  thread-safe, and therefore wrapped with a single global lock around
-  all malloc-related functions.  In some applications, especially with
-  multiple available processors, this can lead to contention problems
-  and bad performance.  This malloc version was designed with the goal
-  to avoid waiting for locks as much as possible.  Statistics indicate
-  that this goal is achieved in many cases.
-
-* Synopsis of public routines
-
-  (Much fuller descriptions are contained in the program documentation below.)
-
-  ptmalloc_init();
-     Initialize global configuration.  When compiled for multiple threads,
-     this function must be called once before any other function in the
-     package.  It is not required otherwise.  It is called automatically
-     in the Linux/GNU C libray or when compiling with MALLOC_HOOKS.
-  malloc(size_t n);
-     Return a pointer to a newly allocated chunk of at least n bytes, or null
-     if no space is available.
-  free(Void_t* p);
-     Release the chunk of memory pointed to by p, or no effect if p is null.
-  realloc(Void_t* p, size_t n);
-     Return a pointer to a chunk of size n that contains the same data
-     as does chunk p up to the minimum of (n, p's size) bytes, or null
-     if no space is available. The returned pointer may or may not be
-     the same as p. If p is null, equivalent to malloc.  Unless the
-     #define REALLOC_ZERO_BYTES_FREES below is set, realloc with a
-     size argument of zero (re)allocates a minimum-sized chunk.
-  memalign(size_t alignment, size_t n);
-     Return a pointer to a newly allocated chunk of n bytes, aligned
-     in accord with the alignment argument, which must be a power of
-     two.
-  valloc(size_t n);
-     Equivalent to memalign(pagesize, n), where pagesize is the page
-     size of the system (or as near to this as can be figured out from
-     all the includes/defines below.)
-  pvalloc(size_t n);
-     Equivalent to valloc(minimum-page-that-holds(n)), that is,
-     round up n to nearest pagesize.
-  calloc(size_t unit, size_t quantity);
-     Returns a pointer to quantity * unit bytes, with all locations
-     set to zero.
-  cfree(Void_t* p);
-     Equivalent to free(p).
-  malloc_trim(size_t pad);
-     Release all but pad bytes of freed top-most memory back
-     to the system. Return 1 if successful, else 0.
-  malloc_usable_size(Void_t* p);
-     Report the number usable allocated bytes associated with allocated
-     chunk p. This may or may not report more bytes than were requested,
-     due to alignment and minimum size constraints.
-  malloc_stats();
-     Prints brief summary statistics on stderr.
-  mallinfo()
-     Returns (by copy) a struct containing various summary statistics.
-  mallopt(int parameter_number, int parameter_value)
-     Changes one of the tunable parameters described below. Returns
-     1 if successful in changing the parameter, else 0.
-
-* Vital statistics:
-
-  Alignment:                            8-byte
-       8 byte alignment is currently hardwired into the design.  This
-       seems to suffice for all current machines and C compilers.
-
-  Assumed pointer representation:       4 or 8 bytes
-       Code for 8-byte pointers is untested by me but has worked
-       reliably by Wolfram Gloger, who contributed most of the
-       changes supporting this.
-
-  Assumed size_t  representation:       4 or 8 bytes
-       Note that size_t is allowed to be 4 bytes even if pointers are 8.
-
-  Minimum overhead per allocated chunk: 4 or 8 bytes
-       Each malloced chunk has a hidden overhead of 4 bytes holding size
-       and status information.
-
-  Minimum allocated size: 4-byte ptrs:  16 bytes    (including 4 overhead)
-                          8-byte ptrs:  24/32 bytes (including, 4/8 overhead)
-
-       When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte
-       ptrs but 4 byte size) or 24 (for 8/8) additional bytes are
-       needed; 4 (8) for a trailing size field
-       and 8 (16) bytes for free list pointers. Thus, the minimum
-       allocatable size is 16/24/32 bytes.
-
-       Even a request for zero bytes (i.e., malloc(0)) returns a
-       pointer to something of the minimum allocatable size.
-
-  Maximum allocated size: 4-byte size_t: 2^31 -  8 bytes
-                          8-byte size_t: 2^63 - 16 bytes
-
-       It is assumed that (possibly signed) size_t bit values suffice to
-       represent chunk sizes. `Possibly signed' is due to the fact
-       that `size_t' may be defined on a system as either a signed or
-       an unsigned type. To be conservative, values that would appear
-       as negative numbers are avoided.
-       Requests for sizes with a negative sign bit will return a
-       minimum-sized chunk.
-
-  Maximum overhead wastage per allocated chunk: normally 15 bytes
-
-       Alignment demands, plus the minimum allocatable size restriction
-       make the normal worst-case wastage 15 bytes (i.e., up to 15
-       more bytes will be allocated than were requested in malloc), with
-       two exceptions:
-         1. Because requests for zero bytes allocate non-zero space,
-            the worst case wastage for a request of zero bytes is 24 bytes.
-         2. For requests >= mmap_threshold that are serviced via
-            mmap(), the worst case wastage is 8 bytes plus the remainder
-            from a system page (the minimal mmap unit); typically 4096 bytes.
-
-* Limitations
-
-    Here are some features that are NOT currently supported
-
-    * No automated mechanism for fully checking that all accesses
-      to malloced memory stay within their bounds.
-    * No support for compaction.
-
-* Synopsis of compile-time options:
-
-    People have reported using previous versions of this malloc on all
-    versions of Unix, sometimes by tweaking some of the defines
-    below. It has been tested most extensively on Solaris and
-    Linux. People have also reported adapting this malloc for use in
-    stand-alone embedded systems.
-
-    The implementation is in straight, hand-tuned ANSI C.  Among other
-    consequences, it uses a lot of macros.  Because of this, to be at
-    all usable, this code should be compiled using an optimizing compiler
-    (for example gcc -O2) that can simplify expressions and control
-    paths.
-
-  __STD_C                  (default: derived from C compiler defines)
-     Nonzero if using ANSI-standard C compiler, a C++ compiler, or
-     a C compiler sufficiently close to ANSI to get away with it.
-  MALLOC_DEBUG             (default: NOT defined)
-     Define to enable debugging. Adds fairly extensive assertion-based
-     checking to help track down memory errors, but noticeably slows down
-     execution.
-  MALLOC_HOOKS             (default: NOT defined)
-     Define to enable support run-time replacement of the allocation
-     functions through user-defined `hooks'.
-  REALLOC_ZERO_BYTES_FREES (default: defined)
-     Define this if you think that realloc(p, 0) should be equivalent
-     to free(p).  (The C standard requires this behaviour, therefore
-     it is the default.)  Otherwise, since malloc returns a unique
-     pointer for malloc(0), so does realloc(p, 0).
-  HAVE_MEMCPY               (default: defined)
-     Define if you are not otherwise using ANSI STD C, but still
-     have memcpy and memset in your C library and want to use them.
-     Otherwise, simple internal versions are supplied.
-  USE_MEMCPY               (default: 1 if HAVE_MEMCPY is defined, 0 otherwise)
-     Define as 1 if you want the C library versions of memset and
-     memcpy called in realloc and calloc (otherwise macro versions are used).
-     At least on some platforms, the simple macro versions usually
-     outperform libc versions.
-  HAVE_MMAP                 (default: defined as 1)
-     Define to non-zero to optionally make malloc() use mmap() to
-     allocate very large blocks.
-  HAVE_MREMAP                 (default: defined as 0 unless Linux libc set)
-     Define to non-zero to optionally make realloc() use mremap() to
-     reallocate very large blocks.
-  USE_ARENAS                (default: the same as HAVE_MMAP)
-     Enable support for multiple arenas, allocated using mmap().
-  malloc_getpagesize        (default: derived from system #includes)
-     Either a constant or routine call returning the system page size.
-  HAVE_USR_INCLUDE_MALLOC_H (default: NOT defined)
-     Optionally define if you are on a system with a /usr/include/malloc.h
-     that declares struct mallinfo. It is not at all necessary to
-     define this even if you do, but will ensure consistency.
-  INTERNAL_SIZE_T           (default: size_t)
-     Define to a 32-bit type (probably `unsigned int') if you are on a
-     64-bit machine, yet do not want or need to allow malloc requests of
-     greater than 2^31 to be handled. This saves space, especially for
-     very small chunks.
-  _LIBC                     (default: NOT defined)
-     Defined only when compiled as part of the Linux libc/glibc.
-     Also note that there is some odd internal name-mangling via defines
-     (for example, internally, `malloc' is named `mALLOc') needed
-     when compiling in this case. These look funny but don't otherwise
-     affect anything.
-  LACKS_UNISTD_H            (default: undefined)
-     Define this if your system does not have a <unistd.h>.
-  MORECORE                  (default: sbrk)
-     The name of the routine to call to obtain more memory from the system.
-  MORECORE_FAILURE          (default: -1)
-     The value returned upon failure of MORECORE.
-  MORECORE_CLEARS           (default 1)
-     The degree to which the routine mapped to MORECORE zeroes out
-     memory: never (0), only for newly allocated space (1) or always
-     (2).  The distinction between (1) and (2) is necessary because on
-     some systems, if the application first decrements and then
-     increments the break value, the contents of the reallocated space
-     are unspecified.
-  DEFAULT_TRIM_THRESHOLD
-  DEFAULT_TOP_PAD
-  DEFAULT_MMAP_THRESHOLD
-  DEFAULT_MMAP_MAX
-     Default values of tunable parameters (described in detail below)
-     controlling interaction with host system routines (sbrk, mmap, etc).
-     These values may also be changed dynamically via mallopt(). The
-     preset defaults are those that give best performance for typical
-     programs/systems.
-  DEFAULT_CHECK_ACTION
-     When the standard debugging hooks are in place, and a pointer is
-     detected as corrupt, do nothing (0), print an error message (1),
-     or call abort() (2).
-
-
-*/
-
-/*
-
-* Compile-time options for multiple threads:
-
-  USE_PTHREADS, USE_THR, USE_SPROC
-     Define one of these as 1 to select the thread interface:
-     POSIX threads, Solaris threads or SGI sproc's, respectively.
-     If none of these is defined as non-zero, you get a `normal'
-     malloc implementation which is not thread-safe.  Support for
-     multiple threads requires HAVE_MMAP=1.  As an exception, when
-     compiling for GNU libc, i.e. when _LIBC is defined, then none of
-     the USE_... symbols have to be defined.
-
-  HEAP_MIN_SIZE
-  HEAP_MAX_SIZE
-     When thread support is enabled, additional `heap's are created
-     with mmap calls.  These are limited in size; HEAP_MIN_SIZE should
-     be a multiple of the page size, while HEAP_MAX_SIZE must be a power
-     of two for alignment reasons.  HEAP_MAX_SIZE should be at least
-     twice as large as the mmap threshold.
-  THREAD_STATS
-     When this is defined as non-zero, some statistics on mutex locking
-     are computed.
-
-*/
-
-
-
-
-/* Preliminaries */
-
-#ifndef __STD_C
-#if defined (__STDC__)
-#define __STD_C     1
-#else
-#if __cplusplus
-#define __STD_C     1
-#else
-#define __STD_C     0
-#endif /*__cplusplus*/
-#endif /*__STDC__*/
-#endif /*__STD_C*/
-
-#ifndef Void_t
-#if __STD_C
-#define Void_t      void
-#else
-#define Void_t      char
-#endif
-#endif /*Void_t*/
-
-#define _GNU_SOURCE
-#include <features.h>
-#define _LIBC 1
-#define NOT_IN_libc 1
-
-#if __STD_C
-# include <stddef.h>   /* for size_t */
-# if defined _LIBC || defined MALLOC_HOOKS
-#  include <stdlib.h>  /* for getenv(), abort() */
-# endif
-#else
-# include <sys/types.h>
-# if defined _LIBC || defined MALLOC_HOOKS
-extern char* getenv();
-# endif
-#endif
-
-/* newlib modifications */
-
-#include <libc-symbols.h>
-#include <sys/types.h>
-
-extern void __pthread_initialize (void) __attribute__((weak));
-extern void *__mmap (void *__addr, size_t __len, int __prot,
-                     int __flags, int __fd, off_t __offset);
-extern int __munmap (void *__addr, size_t __len);
-extern void *__mremap (void *__addr, size_t __old_len, size_t __new_len,
-                       int __may_move);
-extern int __getpagesize (void);
-
-#define __libc_enable_secure 1
-
-/* Macros for handling mutexes and thread-specific data.  This is
-   included early, because some thread-related header files (such as
-   pthread.h) should be included before any others. */
-#include <bits/libc-lock.h>
-#include "thread-m.h"
-
-void *(*__malloc_internal_tsd_get) (enum __libc_tsd_key_t) = NULL;
-int (*__malloc_internal_tsd_set) (enum __libc_tsd_key_t,
-                                       __const void *) = NULL;
-
-weak_alias(__malloc_internal_tsd_get, __libc_internal_tsd_get)
-weak_alias(__malloc_internal_tsd_set, __libc_internal_tsd_set)
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <errno.h>
-#include <stdio.h>    /* needed for malloc_stats */
-
-
-/*
-  Compile-time options
-*/
-
-
-/*
-    Debugging:
-
-    Because freed chunks may be overwritten with link fields, this
-    malloc will often die when freed memory is overwritten by user
-    programs.  This can be very effective (albeit in an annoying way)
-    in helping track down dangling pointers.
-
-    If you compile with -DMALLOC_DEBUG, a number of assertion checks are
-    enabled that will catch more memory errors. You probably won't be
-    able to make much sense of the actual assertion errors, but they
-    should help you locate incorrectly overwritten memory.  The
-    checking is fairly extensive, and will slow down execution
-    noticeably. Calling malloc_stats or mallinfo with MALLOC_DEBUG set will
-    attempt to check every non-mmapped allocated and free chunk in the
-    course of computing the summaries. (By nature, mmapped regions
-    cannot be checked very much automatically.)
-
-    Setting MALLOC_DEBUG may also be helpful if you are trying to modify
-    this code. The assertions in the check routines spell out in more
-    detail the assumptions and invariants underlying the algorithms.
-
-*/
-
-#if MALLOC_DEBUG
-#include <assert.h>
-#else
-#define assert(x) ((void)0)
-#endif
-
-
-/*
-  INTERNAL_SIZE_T is the word-size used for internal bookkeeping
-  of chunk sizes. On a 64-bit machine, you can reduce malloc
-  overhead by defining INTERNAL_SIZE_T to be a 32 bit `unsigned int'
-  at the expense of not being able to handle requests greater than
-  2^31. This limitation is hardly ever a concern; you are encouraged
-  to set this. However, the default version is the same as size_t.
-*/
-
-#ifndef INTERNAL_SIZE_T
-#define INTERNAL_SIZE_T size_t
-#endif
-
-/*
-  REALLOC_ZERO_BYTES_FREES should be set if a call to realloc with
-  zero bytes should be the same as a call to free.  The C standard
-  requires this. Otherwise, since this malloc returns a unique pointer
-  for malloc(0), so does realloc(p, 0).
-*/
-
-
-#define REALLOC_ZERO_BYTES_FREES
-
-
-/*
-  HAVE_MEMCPY should be defined if you are not otherwise using
-  ANSI STD C, but still have memcpy and memset in your C library
-  and want to use them in calloc and realloc. Otherwise simple
-  macro versions are defined here.
-
-  USE_MEMCPY should be defined as 1 if you actually want to
-  have memset and memcpy called. People report that the macro
-  versions are often enough faster than libc versions on many
-  systems that it is better to use them.
-
-*/
-
-#define HAVE_MEMCPY 1
-
-#ifndef USE_MEMCPY
-#ifdef HAVE_MEMCPY
-#define USE_MEMCPY 1
-#else
-#define USE_MEMCPY 0
-#endif
-#endif
-
-#if (__STD_C || defined(HAVE_MEMCPY))
-
-#if __STD_C
-void* memset(void*, int, size_t);
-void* memcpy(void*, const void*, size_t);
-void* memmove(void*, const void*, size_t);
-#else
-Void_t* memset();
-Void_t* memcpy();
-Void_t* memmove();
-#endif
-#endif
-
-/* The following macros are only invoked with (2n+1)-multiples of
-   INTERNAL_SIZE_T units, with a positive integer n. This is exploited
-   for fast inline execution when n is small.  If the regions to be
-   copied do overlap, the destination lies always _below_ the source.  */
-
-#if USE_MEMCPY
-
-#define MALLOC_ZERO(charp, nbytes)                                            \
-do {                                                                          \
-  INTERNAL_SIZE_T mzsz = (nbytes);                                            \
-  if(mzsz <= 9*sizeof(mzsz)) {                                                \
-    INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp);                         \
-    if(mzsz >= 5*sizeof(mzsz)) {     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-      if(mzsz >= 7*sizeof(mzsz)) {   *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-        if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0;                               \
-                                     *mz++ = 0; }}}                           \
-                                     *mz++ = 0;                               \
-                                     *mz++ = 0;                               \
-                                     *mz   = 0;                               \
-  } else memset((charp), 0, mzsz);                                            \
-} while(0)
-
-/* If the regions overlap, dest is always _below_ src.  */
-
-#define MALLOC_COPY(dest,src,nbytes,overlap)                                  \
-do {                                                                          \
-  INTERNAL_SIZE_T mcsz = (nbytes);                                            \
-  if(mcsz <= 9*sizeof(mcsz)) {                                                \
-    INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src);                        \
-    INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest);                       \
-    if(mcsz >= 5*sizeof(mcsz)) {     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-      if(mcsz >= 7*sizeof(mcsz)) {   *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-        if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++; }}}                 \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst++ = *mcsrc++;                     \
-                                     *mcdst   = *mcsrc  ;                     \
-  } else if(overlap)                                                          \
-    memmove(dest, src, mcsz);                                                 \
-  else                                                                        \
-    memcpy(dest, src, mcsz);                                                  \
-} while(0)
-
-#else /* !USE_MEMCPY */
-
-/* Use Duff's device for good zeroing/copying performance. */
-
-#define MALLOC_ZERO(charp, nbytes)                                            \
-do {                                                                          \
-  INTERNAL_SIZE_T* mzp = (INTERNAL_SIZE_T*)(charp);                           \
-  long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn;                         \
-  if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; }             \
-  switch (mctmp) {                                                            \
-    case 0: for(;;) { *mzp++ = 0;                                             \
-    case 7:           *mzp++ = 0;                                             \
-    case 6:           *mzp++ = 0;                                             \
-    case 5:           *mzp++ = 0;                                             \
-    case 4:           *mzp++ = 0;                                             \
-    case 3:           *mzp++ = 0;                                             \
-    case 2:           *mzp++ = 0;                                             \
-    case 1:           *mzp++ = 0; if(mcn <= 0) break; mcn--; }                \
-  }                                                                           \
-} while(0)
-
-/* If the regions overlap, dest is always _below_ src.  */
-
-#define MALLOC_COPY(dest,src,nbytes,overlap)                                  \
-do {                                                                          \
-  INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) src;                            \
-  INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) dest;                           \
-  long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn;                         \
-  if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; }             \
-  switch (mctmp) {                                                            \
-    case 0: for(;;) { *mcdst++ = *mcsrc++;                                    \
-    case 7:           *mcdst++ = *mcsrc++;                                    \
-    case 6:           *mcdst++ = *mcsrc++;                                    \
-    case 5:           *mcdst++ = *mcsrc++;                                    \
-    case 4:           *mcdst++ = *mcsrc++;                                    \
-    case 3:           *mcdst++ = *mcsrc++;                                    \
-    case 2:           *mcdst++ = *mcsrc++;                                    \
-    case 1:           *mcdst++ = *mcsrc++; if(mcn <= 0) break; mcn--; }       \
-  }                                                                           \
-} while(0)
-
-#endif
-
-
-#ifndef LACKS_UNISTD_H
-#  include <unistd.h>
-#endif
-
-/*
-  Define HAVE_MMAP to optionally make malloc() use mmap() to allocate
-  very large blocks.  These will be returned to the operating system
-  immediately after a free().  HAVE_MMAP is also a prerequisite to
-  support multiple `arenas' (see USE_ARENAS below).
-*/
-
-#ifndef HAVE_MMAP
-# ifdef _POSIX_MAPPED_FILES
-#  define HAVE_MMAP 1
-# endif
-#endif
-
-/*
-  Define HAVE_MREMAP to make realloc() use mremap() to re-allocate
-  large blocks.  This is currently only possible on Linux with
-  kernel versions newer than 1.3.77.
-*/
-
-#ifndef HAVE_MREMAP
-#define HAVE_MREMAP defined(__linux__)
-#endif
-
-/* Define USE_ARENAS to enable support for multiple `arenas'.  These
-   are allocated using mmap(), are necessary for threads and
-   occasionally useful to overcome address space limitations affecting
-   sbrk(). */
-
-#ifndef USE_ARENAS
-#define USE_ARENAS HAVE_MMAP
-#endif
-
-#if HAVE_MMAP
-
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
-#define MAP_ANONYMOUS MAP_ANON
-#endif
-#if !defined(MAP_FAILED)
-#define MAP_FAILED ((char*)-1)
-#endif
-
-#ifndef MAP_NORESERVE
-# ifdef MAP_AUTORESRV
-#  define MAP_NORESERVE MAP_AUTORESRV
-# else
-#  define MAP_NORESERVE 0
-# endif
-#endif
-
-#endif /* HAVE_MMAP */
-
-/*
-  Access to system page size. To the extent possible, this malloc
-  manages memory from the system in page-size units.
-
-  The following mechanics for getpagesize were adapted from
-  bsd/gnu getpagesize.h
-*/
-
-#ifndef malloc_getpagesize
-#  ifdef _SC_PAGESIZE         /* some SVR4 systems omit an underscore */
-#    ifndef _SC_PAGE_SIZE
-#      define _SC_PAGE_SIZE _SC_PAGESIZE
-#    endif
-#  endif
-#  ifdef _SC_PAGE_SIZE
-#    define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
-#  else
-#    if defined(BSD) || defined(DGUX) || defined(HAVE_GETPAGESIZE)
-       extern size_t getpagesize();
-#      define malloc_getpagesize getpagesize()
-#    else
-#      include <sys/param.h>
-#      ifdef EXEC_PAGESIZE
-#        define malloc_getpagesize EXEC_PAGESIZE
-#      else
-#        ifdef NBPG
-#          ifndef CLSIZE
-#            define malloc_getpagesize NBPG
-#          else
-#            define malloc_getpagesize (NBPG * CLSIZE)
-#          endif
-#        else
-#          ifdef NBPC
-#            define malloc_getpagesize NBPC
-#          else
-#            ifdef PAGESIZE
-#              define malloc_getpagesize PAGESIZE
-#            else
-#              define malloc_getpagesize (4096) /* just guess */
-#            endif
-#          endif
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-
-
-/*
-
-  This version of malloc supports the standard SVID/XPG mallinfo
-  routine that returns a struct containing the same kind of
-  information you can get from malloc_stats. It should work on
-  any SVID/XPG compliant system that has a /usr/include/malloc.h
-  defining struct mallinfo. (If you'd like to install such a thing
-  yourself, cut out the preliminary declarations as described above
-  and below and save them in a malloc.h file. But there's no
-  compelling reason to bother to do this.)
-
-  The main declaration needed is the mallinfo struct that is returned
-  (by-copy) by mallinfo().  The SVID/XPG malloinfo struct contains a
-  bunch of fields, most of which are not even meaningful in this
-  version of malloc. Some of these fields are are instead filled by
-  mallinfo() with other numbers that might possibly be of interest.
-
-  HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
-  /usr/include/malloc.h file that includes a declaration of struct
-  mallinfo.  If so, it is included; else an SVID2/XPG2 compliant
-  version is declared below.  These must be precisely the same for
-  mallinfo() to work.
-
-*/
-
-/* #define HAVE_USR_INCLUDE_MALLOC_H */
-
-#if HAVE_USR_INCLUDE_MALLOC_H
-# include "/usr/include/malloc.h"
-#else
-# ifdef _LIBC
-#  include "malloc.h"
-# else
-#  include "ptmalloc.h"
-# endif
-#endif
-
-#include <bp-checks.h>
-
-#ifndef DEFAULT_TRIM_THRESHOLD
-#define DEFAULT_TRIM_THRESHOLD (128 * 1024)
-#endif
-
-/*
-    M_TRIM_THRESHOLD is the maximum amount of unused top-most memory
-      to keep before releasing via malloc_trim in free().
-
-      Automatic trimming is mainly useful in long-lived programs.
-      Because trimming via sbrk can be slow on some systems, and can
-      sometimes be wasteful (in cases where programs immediately
-      afterward allocate more large chunks) the value should be high
-      enough so that your overall system performance would improve by
-      releasing.
-
-      The trim threshold and the mmap control parameters (see below)
-      can be traded off with one another. Trimming and mmapping are
-      two different ways of releasing unused memory back to the
-      system. Between these two, it is often possible to keep
-      system-level demands of a long-lived program down to a bare
-      minimum. For example, in one test suite of sessions measuring
-      the XF86 X server on Linux, using a trim threshold of 128K and a
-      mmap threshold of 192K led to near-minimal long term resource
-      consumption.
-
-      If you are using this malloc in a long-lived program, it should
-      pay to experiment with these values.  As a rough guide, you
-      might set to a value close to the average size of a process
-      (program) running on your system.  Releasing this much memory
-      would allow such a process to run in memory.  Generally, it's
-      worth it to tune for trimming rather than memory mapping when a
-      program undergoes phases where several large chunks are
-      allocated and released in ways that can reuse each other's
-      storage, perhaps mixed with phases where there are no such
-      chunks at all.  And in well-behaved long-lived programs,
-      controlling release of large blocks via trimming versus mapping
-      is usually faster.
-
-      However, in most programs, these parameters serve mainly as
-      protection against the system-level effects of carrying around
-      massive amounts of unneeded memory. Since frequent calls to
-      sbrk, mmap, and munmap otherwise degrade performance, the default
-      parameters are set to relatively high values that serve only as
-      safeguards.
-
-      The default trim value is high enough to cause trimming only in
-      fairly extreme (by current memory consumption standards) cases.
-      It must be greater than page size to have any useful effect.  To
-      disable trimming completely, you can set to (unsigned long)(-1);
-
-
-*/
-
-
-#ifndef DEFAULT_TOP_PAD
-#define DEFAULT_TOP_PAD        (0)
-#endif
-
-/*
-    M_TOP_PAD is the amount of extra `padding' space to allocate or
-      retain whenever sbrk is called. It is used in two ways internally:
-
-      * When sbrk is called to extend the top of the arena to satisfy
-        a new malloc request, this much padding is added to the sbrk
-        request.
-
-      * When malloc_trim is called automatically from free(),
-        it is used as the `pad' argument.
-
-      In both cases, the actual amount of padding is rounded
-      so that the end of the arena is always a system page boundary.
-
-      The main reason for using padding is to avoid calling sbrk so
-      often. Having even a small pad greatly reduces the likelihood
-      that nearly every malloc request during program start-up (or
-      after trimming) will invoke sbrk, which needlessly wastes
-      time.
-
-      Automatic rounding-up to page-size units is normally sufficient
-      to avoid measurable overhead, so the default is 0.  However, in
-      systems where sbrk is relatively slow, it can pay to increase
-      this value, at the expense of carrying around more memory than
-      the program needs.
-
-*/
-
-
-#ifndef DEFAULT_MMAP_THRESHOLD
-#define DEFAULT_MMAP_THRESHOLD (128 * 1024)
-#endif
-
-/*
-
-    M_MMAP_THRESHOLD is the request size threshold for using mmap()
-      to service a request. Requests of at least this size that cannot
-      be allocated using already-existing space will be serviced via mmap.
-      (If enough normal freed space already exists it is used instead.)
-
-      Using mmap segregates relatively large chunks of memory so that
-      they can be individually obtained and released from the host
-      system. A request serviced through mmap is never reused by any
-      other request (at least not directly; the system may just so
-      happen to remap successive requests to the same locations).
-
-      Segregating space in this way has the benefit that mmapped space
-      can ALWAYS be individually released back to the system, which
-      helps keep the system level memory demands of a long-lived
-      program low. Mapped memory can never become `locked' between
-      other chunks, as can happen with normally allocated chunks, which
-      menas that even trimming via malloc_trim would not release them.
-
-      However, it has the disadvantages that:
-
-         1. The space cannot be reclaimed, consolidated, and then
-            used to service later requests, as happens with normal chunks.
-         2. It can lead to more wastage because of mmap page alignment
-            requirements
-         3. It causes malloc performance to be more dependent on host
-            system memory management support routines which may vary in
-            implementation quality and may impose arbitrary
-            limitations. Generally, servicing a request via normal
-            malloc steps is faster than going through a system's mmap.
-
-      All together, these considerations should lead you to use mmap
-      only for relatively large requests.
-
-
-*/
-
-
-
-#ifndef DEFAULT_MMAP_MAX
-#if HAVE_MMAP
-#define DEFAULT_MMAP_MAX       (1024)
-#else
-#define DEFAULT_MMAP_MAX       (0)
-#endif
-#endif
-
-/*
-    M_MMAP_MAX is the maximum number of requests to simultaneously
-      service using mmap. This parameter exists because:
-
-         1. Some systems have a limited number of internal tables for
-            use by mmap.
-         2. In most systems, overreliance on mmap can degrade overall
-            performance.
-         3. If a program allocates many large regions, it is probably
-            better off using normal sbrk-based allocation routines that
-            can reclaim and reallocate normal heap memory. Using a
-            small value allows transition into this mode after the
-            first few allocations.
-
-      Setting to 0 disables all use of mmap.  If HAVE_MMAP is not set,
-      the default value is 0, and attempts to set it to non-zero values
-      in mallopt will fail.
-*/
-
-
-
-#ifndef DEFAULT_CHECK_ACTION
-#define DEFAULT_CHECK_ACTION 1
-#endif
-
-/* What to do if the standard debugging hooks are in place and a
-   corrupt pointer is detected: do nothing (0), print an error message
-   (1), or call abort() (2). */
-
-
-
-#define HEAP_MIN_SIZE (32*1024)
-#define HEAP_MAX_SIZE (1024*1024) /* must be a power of two */
-
-/* HEAP_MIN_SIZE and HEAP_MAX_SIZE limit the size of mmap()ed heaps
-      that are dynamically created for multi-threaded programs.  The
-      maximum size must be a power of two, for fast determination of
-      which heap belongs to a chunk.  It should be much larger than
-      the mmap threshold, so that requests with a size just below that
-      threshold can be fulfilled without creating too many heaps.
-*/
-
-
-
-#ifndef THREAD_STATS
-#define THREAD_STATS 0
-#endif
-
-/* If THREAD_STATS is non-zero, some statistics on mutex locking are
-   computed. */
-
-
-/* Macro to set errno.  */
-#ifndef __set_errno
-# define __set_errno(val) errno = (val)
-#endif
-
-/* On some platforms we can compile internal, not exported functions better.
-   Let the environment provide a macro and define it to be empty if it
-   is not available.  */
-#ifndef internal_function
-# define internal_function
-#endif
-
-
-/*
-
-  Special defines for the Linux/GNU C library.
-
-*/
-
-
-#ifdef _LIBC
-
-#if __STD_C
-
-Void_t * __default_morecore (ptrdiff_t);
-Void_t *(*__morecore)(ptrdiff_t) = __default_morecore;
-
-#else
-
-Void_t * __default_morecore ();
-Void_t *(*__morecore)() = __default_morecore;
-
-#endif
-
-#define MORECORE (*__morecore)
-#define MORECORE_FAILURE 0
-
-#ifndef MORECORE_CLEARS
-#define MORECORE_CLEARS 1
-#endif
-
-static size_t __libc_pagesize;
-
-#define access	__access
-#define mmap    __mmap
-#define munmap  __munmap
-#define mremap  __mremap
-#define mprotect __mprotect
-#undef malloc_getpagesize
-#define malloc_getpagesize __libc_pagesize
-
-#else /* _LIBC */
-
-#if __STD_C
-extern Void_t*     sbrk(ptrdiff_t);
-#else
-extern Void_t*     sbrk();
-#endif
-
-#ifndef MORECORE
-#define MORECORE sbrk
-#endif
-
-#ifndef MORECORE_FAILURE
-#define MORECORE_FAILURE -1
-#endif
-
-#ifndef MORECORE_CLEARS
-#define MORECORE_CLEARS 1
-#endif
-
-#endif /* _LIBC */
-
-#ifdef _LIBC
-
-#define cALLOc          __libc_calloc
-#define fREe            __libc_free
-#define mALLOc          __libc_malloc
-#define mEMALIGn        __libc_memalign
-#define rEALLOc         __libc_realloc
-#define vALLOc          __libc_valloc
-#define pvALLOc         __libc_pvalloc
-#define mALLINFo        __libc_mallinfo
-#define mALLOPt         __libc_mallopt
-#define mALLOC_STATs    __malloc_stats
-#define mALLOC_USABLE_SIZe __malloc_usable_size
-#define mALLOC_TRIm     __malloc_trim
-#define mALLOC_GET_STATe __malloc_get_state
-#define mALLOC_SET_STATe __malloc_set_state
-
-#else
-
-#define cALLOc          calloc
-#define fREe            free
-#define mALLOc          malloc
-#define mEMALIGn        memalign
-#define rEALLOc         realloc
-#define vALLOc          valloc
-#define pvALLOc         pvalloc
-#define mALLINFo        mallinfo
-#define mALLOPt         mallopt
-#define mALLOC_STATs    malloc_stats
-#define mALLOC_USABLE_SIZe malloc_usable_size
-#define mALLOC_TRIm     malloc_trim
-#define mALLOC_GET_STATe malloc_get_state
-#define mALLOC_SET_STATe malloc_set_state
-
-#endif
-
-/* Public routines */
-
-#if __STD_C
-
-#ifndef _LIBC
-void    ptmalloc_init(void);
-#endif
-Void_t* mALLOc(size_t);
-void    fREe(Void_t*);
-Void_t* rEALLOc(Void_t*, size_t);
-Void_t* mEMALIGn(size_t, size_t);
-Void_t* vALLOc(size_t);
-Void_t* pvALLOc(size_t);
-Void_t* cALLOc(size_t, size_t);
-void    cfree(Void_t*);
-int     mALLOC_TRIm(size_t);
-size_t  mALLOC_USABLE_SIZe(Void_t*);
-void    mALLOC_STATs(void);
-int     mALLOPt(int, int);
-struct mallinfo mALLINFo(void);
-Void_t* mALLOC_GET_STATe(void);
-int     mALLOC_SET_STATe(Void_t*);
-
-#else /* !__STD_C */
-
-#ifndef _LIBC
-void    ptmalloc_init();
-#endif
-Void_t* mALLOc();
-void    fREe();
-Void_t* rEALLOc();
-Void_t* mEMALIGn();
-Void_t* vALLOc();
-Void_t* pvALLOc();
-Void_t* cALLOc();
-void    cfree();
-int     mALLOC_TRIm();
-size_t  mALLOC_USABLE_SIZe();
-void    mALLOC_STATs();
-int     mALLOPt();
-struct mallinfo mALLINFo();
-Void_t* mALLOC_GET_STATe();
-int     mALLOC_SET_STATe();
-
-#endif /* __STD_C */
-
-
-#ifdef __cplusplus
-} /* end of extern "C" */
-#endif
-
-#if !defined(NO_THREADS) && !HAVE_MMAP
-"Can't have threads support without mmap"
-#endif
-#if USE_ARENAS && !HAVE_MMAP
-"Can't have multiple arenas without mmap"
-#endif
-
-
-/*
-  Type declarations
-*/
-
-
-struct malloc_chunk
-{
-  INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
-  INTERNAL_SIZE_T size;      /* Size in bytes, including overhead. */
-  struct malloc_chunk* fd;   /* double links -- used only if free. */
-  struct malloc_chunk* bk;
-};
-
-typedef struct malloc_chunk* mchunkptr;
-
-/*
-
-   malloc_chunk details:
-
-    (The following includes lightly edited explanations by Colin Plumb.)
-
-    Chunks of memory are maintained using a `boundary tag' method as
-    described in e.g., Knuth or Standish.  (See the paper by Paul
-    Wilson ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a
-    survey of such techniques.)  Sizes of free chunks are stored both
-    in the front of each chunk and at the end.  This makes
-    consolidating fragmented chunks into bigger chunks very fast.  The
-    size fields also hold bits representing whether chunks are free or
-    in use.
-
-    An allocated chunk looks like this:
-
-
-    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk, if allocated            | |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk, in bytes                         |P|
-      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             User data starts here...                          .
-            .                                                               .
-            .             (malloc_usable_space() bytes)                     .
-            .                                                               |
-nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of chunk                                     |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-
-    Where "chunk" is the front of the chunk for the purpose of most of
-    the malloc code, but "mem" is the pointer that is returned to the
-    user.  "Nextchunk" is the beginning of the next contiguous chunk.
-
-    Chunks always begin on even word boundaries, so the mem portion
-    (which is returned to the user) is also on an even word boundary, and
-    thus double-word aligned.
-
-    Free chunks are stored in circular doubly-linked lists, and look like this:
-
-    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Size of previous chunk                            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-    `head:' |             Size of chunk, in bytes                         |P|
-      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Forward pointer to next chunk in list             |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Back pointer to previous chunk in list            |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-            |             Unused space (may be 0 bytes long)                .
-            .                                                               .
-            .                                                               |
-nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-    `foot:' |             Size of chunk, in bytes                           |
-            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-    The P (PREV_INUSE) bit, stored in the unused low-order bit of the
-    chunk size (which is always a multiple of two words), is an in-use
-    bit for the *previous* chunk.  If that bit is *clear*, then the
-    word before the current chunk size contains the previous chunk
-    size, and can be used to find the front of the previous chunk.
-    (The very first chunk allocated always has this bit set,
-    preventing access to non-existent (or non-owned) memory.)
-
-    Note that the `foot' of the current chunk is actually represented
-    as the prev_size of the NEXT chunk. (This makes it easier to
-    deal with alignments etc).
-
-    The two exceptions to all this are
-
-     1. The special chunk `top', which doesn't bother using the
-        trailing size field since there is no
-        next contiguous chunk that would have to index off it. (After
-        initialization, `top' is forced to always exist.  If it would
-        become less than MINSIZE bytes long, it is replenished via
-        malloc_extend_top.)
-
-     2. Chunks allocated via mmap, which have the second-lowest-order
-        bit (IS_MMAPPED) set in their size fields.  Because they are
-        never merged or traversed from any other chunk, they have no
-        foot size or inuse information.
-
-    Available chunks are kept in any of several places (all declared below):
-
-    * `av': An array of chunks serving as bin headers for consolidated
-       chunks. Each bin is doubly linked.  The bins are approximately
-       proportionally (log) spaced.  There are a lot of these bins
-       (128). This may look excessive, but works very well in
-       practice.  All procedures maintain the invariant that no
-       consolidated chunk physically borders another one. Chunks in
-       bins are kept in size order, with ties going to the
-       approximately least recently used chunk.
-
-       The chunks in each bin are maintained in decreasing sorted order by
-       size.  This is irrelevant for the small bins, which all contain
-       the same-sized chunks, but facilitates best-fit allocation for
-       larger chunks. (These lists are just sequential. Keeping them in
-       order almost never requires enough traversal to warrant using
-       fancier ordered data structures.)  Chunks of the same size are
-       linked with the most recently freed at the front, and allocations
-       are taken from the back.  This results in LRU or FIFO allocation
-       order, which tends to give each chunk an equal opportunity to be
-       consolidated with adjacent freed chunks, resulting in larger free
-       chunks and less fragmentation.
-
-    * `top': The top-most available chunk (i.e., the one bordering the
-       end of available memory) is treated specially. It is never
-       included in any bin, is used only if no other chunk is
-       available, and is released back to the system if it is very
-       large (see M_TRIM_THRESHOLD).
-
-    * `last_remainder': A bin holding only the remainder of the
-       most recently split (non-top) chunk. This bin is checked
-       before other non-fitting chunks, so as to provide better
-       locality for runs of sequentially allocated chunks.
-
-    *  Implicitly, through the host system's memory mapping tables.
-       If supported, requests greater than a threshold are usually
-       serviced via calls to mmap, and then later released via munmap.
-
-*/
-
-/*
-   Bins
-
-    The bins are an array of pairs of pointers serving as the
-    heads of (initially empty) doubly-linked lists of chunks, laid out
-    in a way so that each pair can be treated as if it were in a
-    malloc_chunk. (This way, the fd/bk offsets for linking bin heads
-    and chunks are the same).
-
-    Bins for sizes < 512 bytes contain chunks of all the same size, spaced
-    8 bytes apart. Larger bins are approximately logarithmically
-    spaced. (See the table below.)
-
-    Bin layout:
-
-    64 bins of size       8
-    32 bins of size      64
-    16 bins of size     512
-     8 bins of size    4096
-     4 bins of size   32768
-     2 bins of size  262144
-     1 bin  of size what's left
-
-    There is actually a little bit of slop in the numbers in bin_index
-    for the sake of speed. This makes no difference elsewhere.
-
-    The special chunks `top' and `last_remainder' get their own bins,
-    (this is implemented via yet more trickery with the av array),
-    although `top' is never properly linked to its bin since it is
-    always handled specially.
-
-*/
-
-#define NAV             128   /* number of bins */
-
-typedef struct malloc_chunk* mbinptr;
-
-/* An arena is a configuration of malloc_chunks together with an array
-   of bins.  With multiple threads, it must be locked via a mutex
-   before changing its data structures.  One or more `heaps' are
-   associated with each arena, except for the main_arena, which is
-   associated only with the `main heap', i.e.  the conventional free
-   store obtained with calls to MORECORE() (usually sbrk).  The `av'
-   array is never mentioned directly in the code, but instead used via
-   bin access macros. */
-
-typedef struct _arena {
-  mbinptr av[2*NAV + 2];
-  struct _arena *next;
-  size_t size;
-#if THREAD_STATS
-  long stat_lock_direct, stat_lock_loop, stat_lock_wait;
-#endif
-  mutex_t mutex;
-} arena;
-
-
-/* A heap is a single contiguous memory region holding (coalesceable)
-   malloc_chunks.  It is allocated with mmap() and always starts at an
-   address aligned to HEAP_MAX_SIZE.  Not used unless compiling with
-   USE_ARENAS. */
-
-typedef struct _heap_info {
-  arena *ar_ptr; /* Arena for this heap. */
-  struct _heap_info *prev; /* Previous heap. */
-  size_t size;   /* Current size in bytes. */
-  size_t pad;    /* Make sure the following data is properly aligned. */
-} heap_info;
-
-
-/*
-  Static functions (forward declarations)
-*/
-
-#if __STD_C
-
-static void      chunk_free(arena *ar_ptr, mchunkptr p) internal_function;
-static mchunkptr chunk_alloc(arena *ar_ptr, INTERNAL_SIZE_T size)
-     internal_function;
-static mchunkptr chunk_realloc(arena *ar_ptr, mchunkptr oldp,
-                               INTERNAL_SIZE_T oldsize, INTERNAL_SIZE_T nb)
-     internal_function;
-static mchunkptr chunk_align(arena *ar_ptr, INTERNAL_SIZE_T nb,
-                             size_t alignment) internal_function;
-static int       main_trim(size_t pad) internal_function;
-#if USE_ARENAS
-static int       heap_trim(heap_info *heap, size_t pad) internal_function;
-#endif
-#if defined _LIBC || defined MALLOC_HOOKS
-static Void_t*   malloc_check(size_t sz, const Void_t *caller);
-static void      free_check(Void_t* mem, const Void_t *caller);
-static Void_t*   realloc_check(Void_t* oldmem, size_t bytes,
-			       const Void_t *caller);
-static Void_t*   memalign_check(size_t alignment, size_t bytes,
-				const Void_t *caller);
-#ifndef NO_THREADS
-static Void_t*   malloc_starter(size_t sz, const Void_t *caller);
-static void      free_starter(Void_t* mem, const Void_t *caller);
-static Void_t*   malloc_atfork(size_t sz, const Void_t *caller);
-static void      free_atfork(Void_t* mem, const Void_t *caller);
-#endif
-#endif
-
-#else
-
-static void      chunk_free();
-static mchunkptr chunk_alloc();
-static mchunkptr chunk_realloc();
-static mchunkptr chunk_align();
-static int       main_trim();
-#if USE_ARENAS
-static int       heap_trim();
-#endif
-#if defined _LIBC || defined MALLOC_HOOKS
-static Void_t*   malloc_check();
-static void      free_check();
-static Void_t*   realloc_check();
-static Void_t*   memalign_check();
-#ifndef NO_THREADS
-static Void_t*   malloc_starter();
-static void      free_starter();
-static Void_t*   malloc_atfork();
-static void      free_atfork();
-#endif
-#endif
-
-#endif
-
-
-
-/* sizes, alignments */
-
-#define SIZE_SZ                (sizeof(INTERNAL_SIZE_T))
-/* Allow the default to be overwritten on the compiler command line.  */
-#ifndef MALLOC_ALIGNMENT
-# define MALLOC_ALIGNMENT      (SIZE_SZ + SIZE_SZ)
-#endif
-#define MALLOC_ALIGN_MASK      (MALLOC_ALIGNMENT - 1)
-#define MINSIZE                (sizeof(struct malloc_chunk))
-
-/* conversion from malloc headers to user pointers, and back */
-
-#define chunk2mem(p) ((Void_t*)((char*)(p) + 2*SIZE_SZ))
-#define mem2chunk(mem) chunk_at_offset((mem), -2*SIZE_SZ)
-
-/* pad request bytes into a usable size, return non-zero on overflow */
-
-#define request2size(req, nb) \
- ((nb = (req) + (SIZE_SZ + MALLOC_ALIGN_MASK)),\
-  ((long)nb <= 0 || nb < (INTERNAL_SIZE_T) (req) \
-   ? (__set_errno (ENOMEM), 1) \
-   : ((nb < (MINSIZE + MALLOC_ALIGN_MASK) \
-	   ? (nb = MINSIZE) : (nb &= ~MALLOC_ALIGN_MASK)), 0)))
-
-/* Check if m has acceptable alignment */
-
-#define aligned_OK(m)    (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0)
-
-
-
-
-/*
-  Physical chunk operations
-*/
-
-
-/* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */
-
-#define PREV_INUSE 0x1UL
-
-/* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */
-
-#define IS_MMAPPED 0x2UL
-
-/* Bits to mask off when extracting size */
-
-#define SIZE_BITS (PREV_INUSE|IS_MMAPPED)
-
-
-/* Ptr to next physical malloc_chunk. */
-
-#define next_chunk(p) chunk_at_offset((p), (p)->size & ~PREV_INUSE)
-
-/* Ptr to previous physical malloc_chunk */
-
-#define prev_chunk(p) chunk_at_offset((p), -(p)->prev_size)
-
-
-/* Treat space at ptr + offset as a chunk */
-
-#define chunk_at_offset(p, s)  BOUNDED_1((mchunkptr)(((char*)(p)) + (s)))
-
-
-
-
-/*
-  Dealing with use bits
-*/
-
-/* extract p's inuse bit */
-
-#define inuse(p) (next_chunk(p)->size & PREV_INUSE)
-
-/* extract inuse bit of previous chunk */
-
-#define prev_inuse(p)  ((p)->size & PREV_INUSE)
-
-/* check for mmap()'ed chunk */
-
-#define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED)
-
-/* set/clear chunk as in use without otherwise disturbing */
-
-#define set_inuse(p) (next_chunk(p)->size |= PREV_INUSE)
-
-#define clear_inuse(p) (next_chunk(p)->size &= ~PREV_INUSE)
-
-/* check/set/clear inuse bits in known places */
-
-#define inuse_bit_at_offset(p, s) \
-  (chunk_at_offset((p), (s))->size & PREV_INUSE)
-
-#define set_inuse_bit_at_offset(p, s) \
-  (chunk_at_offset((p), (s))->size |= PREV_INUSE)
-
-#define clear_inuse_bit_at_offset(p, s) \
-  (chunk_at_offset((p), (s))->size &= ~(PREV_INUSE))
-
-
-
-
-/*
-  Dealing with size fields
-*/
-
-/* Get size, ignoring use bits */
-
-#define chunksize(p)          ((p)->size & ~(SIZE_BITS))
-
-/* Set size at head, without disturbing its use bit */
-
-#define set_head_size(p, s)   ((p)->size = (((p)->size & PREV_INUSE) | (s)))
-
-/* Set size/use ignoring previous bits in header */
-
-#define set_head(p, s)        ((p)->size = (s))
-
-/* Set size at footer (only when chunk is not in use) */
-
-#define set_foot(p, s)   (chunk_at_offset(p, s)->prev_size = (s))
-
-
-
-
-
-/* access macros */
-
-#define bin_at(a, i)   BOUNDED_1(_bin_at(a, i))
-#define _bin_at(a, i)  ((mbinptr)((char*)&(((a)->av)[2*(i)+2]) - 2*SIZE_SZ))
-#define init_bin(a, i) ((a)->av[2*(i)+2] = (a)->av[2*(i)+3] = bin_at((a), (i)))
-#define next_bin(b)    ((mbinptr)((char*)(b) + 2 * sizeof(((arena*)0)->av[0])))
-#define prev_bin(b)    ((mbinptr)((char*)(b) - 2 * sizeof(((arena*)0)->av[0])))
-
-/*
-   The first 2 bins are never indexed. The corresponding av cells are instead
-   used for bookkeeping. This is not to save space, but to simplify
-   indexing, maintain locality, and avoid some initialization tests.
-*/
-
-#define binblocks(a)      (bin_at(a,0)->size)/* bitvector of nonempty blocks */
-#define top(a)            (bin_at(a,0)->fd)  /* The topmost chunk */
-#define last_remainder(a) (bin_at(a,1))      /* remainder from last split */
-
-/*
-   Because top initially points to its own bin with initial
-   zero size, thus forcing extension on the first malloc request,
-   we avoid having any special code in malloc to check whether
-   it even exists yet. But we still need to in malloc_extend_top.
-*/
-
-#define initial_top(a)    ((mchunkptr)bin_at(a, 0))
-
-
-
-/* field-extraction macros */
-
-#define first(b) ((b)->fd)
-#define last(b)  ((b)->bk)
-
-/*
-  Indexing into bins
-*/
-
-#define bin_index(sz)                                                         \
-(((((unsigned long)(sz)) >> 9) ==    0) ?       (((unsigned long)(sz)) >>  3):\
- ((((unsigned long)(sz)) >> 9) <=    4) ?  56 + (((unsigned long)(sz)) >>  6):\
- ((((unsigned long)(sz)) >> 9) <=   20) ?  91 + (((unsigned long)(sz)) >>  9):\
- ((((unsigned long)(sz)) >> 9) <=   84) ? 110 + (((unsigned long)(sz)) >> 12):\
- ((((unsigned long)(sz)) >> 9) <=  340) ? 119 + (((unsigned long)(sz)) >> 15):\
- ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18):\
-                                          126)
-/*
-  bins for chunks < 512 are all spaced 8 bytes apart, and hold
-  identically sized chunks. This is exploited in malloc.
-*/
-
-#define MAX_SMALLBIN         63
-#define MAX_SMALLBIN_SIZE   512
-#define SMALLBIN_WIDTH        8
-
-#define smallbin_index(sz)  (((unsigned long)(sz)) >> 3)
-
-/*
-   Requests are `small' if both the corresponding and the next bin are small
-*/
-
-#define is_small_request(nb) ((nb) < MAX_SMALLBIN_SIZE - SMALLBIN_WIDTH)
-
-
-
-/*
-    To help compensate for the large number of bins, a one-level index
-    structure is used for bin-by-bin searching.  `binblocks' is a
-    one-word bitvector recording whether groups of BINBLOCKWIDTH bins
-    have any (possibly) non-empty bins, so they can be skipped over
-    all at once during during traversals. The bits are NOT always
-    cleared as soon as all bins in a block are empty, but instead only
-    when all are noticed to be empty during traversal in malloc.
-*/
-
-#define BINBLOCKWIDTH     4   /* bins per block */
-
-/* bin<->block macros */
-
-#define idx2binblock(ix)      ((unsigned)1 << ((ix) / BINBLOCKWIDTH))
-#define mark_binblock(a, ii)  (binblocks(a) |= idx2binblock(ii))
-#define clear_binblock(a, ii) (binblocks(a) &= ~(idx2binblock(ii)))
-
-
-
-
-/* Static bookkeeping data */
-
-/* Helper macro to initialize bins */
-#define IAV(i) _bin_at(&main_arena, i), _bin_at(&main_arena, i)
-
-static arena main_arena = {
-    {
- 0, 0,
- IAV(0),   IAV(1),   IAV(2),   IAV(3),   IAV(4),   IAV(5),   IAV(6),   IAV(7),
- IAV(8),   IAV(9),   IAV(10),  IAV(11),  IAV(12),  IAV(13),  IAV(14),  IAV(15),
- IAV(16),  IAV(17),  IAV(18),  IAV(19),  IAV(20),  IAV(21),  IAV(22),  IAV(23),
- IAV(24),  IAV(25),  IAV(26),  IAV(27),  IAV(28),  IAV(29),  IAV(30),  IAV(31),
- IAV(32),  IAV(33),  IAV(34),  IAV(35),  IAV(36),  IAV(37),  IAV(38),  IAV(39),
- IAV(40),  IAV(41),  IAV(42),  IAV(43),  IAV(44),  IAV(45),  IAV(46),  IAV(47),
- IAV(48),  IAV(49),  IAV(50),  IAV(51),  IAV(52),  IAV(53),  IAV(54),  IAV(55),
- IAV(56),  IAV(57),  IAV(58),  IAV(59),  IAV(60),  IAV(61),  IAV(62),  IAV(63),
- IAV(64),  IAV(65),  IAV(66),  IAV(67),  IAV(68),  IAV(69),  IAV(70),  IAV(71),
- IAV(72),  IAV(73),  IAV(74),  IAV(75),  IAV(76),  IAV(77),  IAV(78),  IAV(79),
- IAV(80),  IAV(81),  IAV(82),  IAV(83),  IAV(84),  IAV(85),  IAV(86),  IAV(87),
- IAV(88),  IAV(89),  IAV(90),  IAV(91),  IAV(92),  IAV(93),  IAV(94),  IAV(95),
- IAV(96),  IAV(97),  IAV(98),  IAV(99),  IAV(100), IAV(101), IAV(102), IAV(103),
- IAV(104), IAV(105), IAV(106), IAV(107), IAV(108), IAV(109), IAV(110), IAV(111),
- IAV(112), IAV(113), IAV(114), IAV(115), IAV(116), IAV(117), IAV(118), IAV(119),
- IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127)
-    },
-    &main_arena, /* next */
-    0, /* size */
-#if THREAD_STATS
-    0, 0, 0, /* stat_lock_direct, stat_lock_loop, stat_lock_wait */
-#endif
-    MUTEX_INITIALIZER /* mutex */
-};
-
-#undef IAV
-
-/* Thread specific data */
-
-static tsd_key_t arena_key;
-static mutex_t list_lock = MUTEX_INITIALIZER;
-
-#if THREAD_STATS
-static int stat_n_heaps;
-#define THREAD_STAT(x) x
-#else
-#define THREAD_STAT(x) do ; while(0)
-#endif
-
-/* variables holding tunable values */
-
-static unsigned long trim_threshold   = DEFAULT_TRIM_THRESHOLD;
-static unsigned long top_pad          = DEFAULT_TOP_PAD;
-static unsigned int  n_mmaps_max      = DEFAULT_MMAP_MAX;
-static unsigned long mmap_threshold   = DEFAULT_MMAP_THRESHOLD;
-static int           check_action     = DEFAULT_CHECK_ACTION;
-
-/* The first value returned from sbrk */
-static char* sbrk_base = (char*)(-1);
-
-/* The maximum memory obtained from system via sbrk */
-static unsigned long max_sbrked_mem;
-
-/* The maximum via either sbrk or mmap (too difficult to track with threads) */
-#ifdef NO_THREADS
-static unsigned long max_total_mem;
-#endif
-
-/* The total memory obtained from system via sbrk */
-#define sbrked_mem (main_arena.size)
-
-/* Tracking mmaps */
-
-static unsigned int n_mmaps;
-static unsigned int max_n_mmaps;
-static unsigned long mmapped_mem;
-static unsigned long max_mmapped_mem;
-
-/* Mapped memory in non-main arenas (reliable only for NO_THREADS). */
-static unsigned long arena_mem;
-
-
-
-#ifndef _LIBC
-#define weak_variable
-#else
-/* In GNU libc we want the hook variables to be weak definitions to
-   avoid a problem with Emacs.  */
-#define weak_variable weak_function
-#endif
-
-/* Already initialized? */
-int __malloc_initialized = -1;
-
-
-#ifndef NO_THREADS
-
-/* Magic value for the thread-specific arena pointer when
-   malloc_atfork() is in use.  */
-
-#define ATFORK_ARENA_PTR ((Void_t*)-1)
-
-/* The following two functions are registered via thread_atfork() to
-   make sure that the mutexes remain in a consistent state in the
-   fork()ed version of a thread.  Also adapt the malloc and free hooks
-   temporarily, because the `atfork' handler mechanism may use
-   malloc/free internally (e.g. in LinuxThreads). */
-
-#if defined _LIBC || defined MALLOC_HOOKS
-static __malloc_ptr_t (*save_malloc_hook) __MALLOC_P ((size_t __size,
-						       const __malloc_ptr_t));
-static void           (*save_free_hook) __MALLOC_P ((__malloc_ptr_t __ptr,
-						     const __malloc_ptr_t));
-static Void_t*        save_arena;
-#endif
-
-static void
-ptmalloc_lock_all __MALLOC_P((void))
-{
-  arena *ar_ptr;
-
-  (void)mutex_lock(&list_lock);
-  for(ar_ptr = &main_arena;;) {
-    (void)mutex_lock(&ar_ptr->mutex);
-    ar_ptr = ar_ptr->next;
-    if(ar_ptr == &main_arena) break;
-  }
-#if defined _LIBC || defined MALLOC_HOOKS
-  save_malloc_hook = __malloc_hook;
-  save_free_hook = __free_hook;
-  __malloc_hook = malloc_atfork;
-  __free_hook = free_atfork;
-  /* Only the current thread may perform malloc/free calls now. */
-  tsd_getspecific(arena_key, save_arena);
-  tsd_setspecific(arena_key, ATFORK_ARENA_PTR);
-#endif
-}
-
-static void
-ptmalloc_unlock_all __MALLOC_P((void))
-{
-  arena *ar_ptr;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  tsd_setspecific(arena_key, save_arena);
-  __malloc_hook = save_malloc_hook;
-  __free_hook = save_free_hook;
-#endif
-  for(ar_ptr = &main_arena;;) {
-    (void)mutex_unlock(&ar_ptr->mutex);
-    ar_ptr = ar_ptr->next;
-    if(ar_ptr == &main_arena) break;
-  }
-  (void)mutex_unlock(&list_lock);
-}
-
-static void
-ptmalloc_init_all __MALLOC_P((void))
-{
-  arena *ar_ptr;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  tsd_setspecific(arena_key, save_arena);
-  __malloc_hook = save_malloc_hook;
-  __free_hook = save_free_hook;
-#endif
-  for(ar_ptr = &main_arena;;) {
-    (void)mutex_init(&ar_ptr->mutex);
-    ar_ptr = ar_ptr->next;
-    if(ar_ptr == &main_arena) break;
-  }
-  (void)mutex_init(&list_lock);
-}
-
-#endif /* !defined NO_THREADS */
-
-/* Initialization routine. */
-#if defined(_LIBC)
-#if 0
-static void ptmalloc_init __MALLOC_P ((void)) __attribute__ ((constructor));
-#endif
-
-#ifdef _LIBC
-#include <string.h>
-extern char **environ;
-
-static char *
-internal_function
-next_env_entry (char ***position)
-{
-  char **current = *position;
-  char *result = NULL;
-
-  while (*current != NULL)
-    {
-      if (__builtin_expect ((*current)[0] == 'M', 0)
-	  && (*current)[1] == 'A'
-	  && (*current)[2] == 'L'
-	  && (*current)[3] == 'L'
-	  && (*current)[4] == 'O'
-	  && (*current)[5] == 'C'
-	  && (*current)[6] == '_')
-	{
-	  result = &(*current)[7];
-
-	  /* Save current position for next visit.  */
-	  *position = ++current;
-
-	  break;
-	}
-
-      ++current;
-    }
-
-  return result;
-}
-#endif
-
-static void
-ptmalloc_init __MALLOC_P((void))
-#else
-void
-ptmalloc_init __MALLOC_P((void))
-#endif
-{
-#if defined _LIBC || defined MALLOC_HOOKS
-# if __STD_C
-  const char* s;
-# else
-  char* s;
-# endif
-#endif
-  int secure;
-
-  if(__malloc_initialized >= 0) return;
-  __malloc_initialized = 0;
-#ifdef _LIBC
-  __libc_pagesize = __getpagesize();
-#endif
-#ifndef NO_THREADS
-#if defined _LIBC || defined MALLOC_HOOKS
-  /* With some threads implementations, creating thread-specific data
-     or initializing a mutex may call malloc() itself.  Provide a
-     simple starter version (realloc() won't work). */
-  save_malloc_hook = __malloc_hook;
-  save_free_hook = __free_hook;
-  __malloc_hook = malloc_starter;
-  __free_hook = free_starter;
-#endif
-#ifdef _LIBC
-  /* Initialize the pthreads interface. */
-  if (__pthread_initialize != NULL)
-    __pthread_initialize();
-#endif
-#endif /* !defined NO_THREADS */
-  mutex_init(&main_arena.mutex);
-  mutex_init(&list_lock);
-  tsd_key_create(&arena_key, NULL);
-  tsd_setspecific(arena_key, (Void_t *)&main_arena);
-  thread_atfork(ptmalloc_lock_all, ptmalloc_unlock_all, ptmalloc_init_all);
-#if defined _LIBC || defined MALLOC_HOOKS
-#ifndef NO_THREADS
-  __malloc_hook = save_malloc_hook;
-  __free_hook = save_free_hook;
-#endif
-  secure = __libc_enable_secure;
-#ifdef _LIBC
-  s = NULL;
-  if (environ != NULL)
-    {
-      char **runp = environ;
-      char *envline;
-
-      while (__builtin_expect ((envline = next_env_entry (&runp)) != NULL, 0))
-	{
-	  size_t len = strcspn (envline, "=");
-
-	  if (envline[len] != '=')
-	    /* This is a "MALLOC_" variable at the end of the string
-	       without a '=' character.  Ignore it since otherwise we
-	       will access invalid memory below.  */
-	    continue;
-
-	  switch (len)
-	    {
-	    case 6:
-	      if (memcmp (envline, "CHECK_", 6) == 0)
-		s = &envline[7];
-	      break;
-	    case 8:
-	      if (! secure && memcmp (envline, "TOP_PAD_", 8) == 0)
-		mALLOPt(M_TOP_PAD, atoi(&envline[9]));
-	      break;
-	    case 9:
-	      if (! secure && memcmp (envline, "MMAP_MAX_", 9) == 0)
-		mALLOPt(M_MMAP_MAX, atoi(&envline[10]));
-	      break;
-	    case 15:
-	      if (! secure)
-		{
-		  if (memcmp (envline, "TRIM_THRESHOLD_", 15) == 0)
-		    mALLOPt(M_TRIM_THRESHOLD, atoi(&envline[16]));
-		  else if (memcmp (envline, "MMAP_THRESHOLD_", 15) == 0)
-		    mALLOPt(M_MMAP_THRESHOLD, atoi(&envline[16]));
-		}
-	      break;
-	    default:
-	      break;
-	    }
-	}
-    }
-#else
-  if (! secure)
-    {
-      if((s = getenv("MALLOC_TRIM_THRESHOLD_")))
-	mALLOPt(M_TRIM_THRESHOLD, atoi(s));
-      if((s = getenv("MALLOC_TOP_PAD_")))
-	mALLOPt(M_TOP_PAD, atoi(s));
-      if((s = getenv("MALLOC_MMAP_THRESHOLD_")))
-	mALLOPt(M_MMAP_THRESHOLD, atoi(s));
-      if((s = getenv("MALLOC_MMAP_MAX_")))
-	mALLOPt(M_MMAP_MAX, atoi(s));
-    }
-  s = getenv("MALLOC_CHECK_");
-#endif
-  if(s) {
-    if(s[0]) mALLOPt(M_CHECK_ACTION, (int)(s[0] - '0'));
-    __malloc_check_init();
-  }
-  if(__malloc_initialize_hook != NULL)
-    (*__malloc_initialize_hook)();
-#endif
-  __malloc_initialized = 1;
-}
-
-/* There are platforms (e.g. Hurd) with a link-time hook mechanism. */
-#ifdef thread_atfork_static
-thread_atfork_static(ptmalloc_lock_all, ptmalloc_unlock_all, \
-                     ptmalloc_init_all)
-#endif
-
-#if defined _LIBC || defined MALLOC_HOOKS
-
-/* Hooks for debugging versions.  The initial hooks just call the
-   initialization routine, then do the normal work. */
-
-static Void_t*
-#if __STD_C
-malloc_hook_ini(size_t sz, const __malloc_ptr_t caller)
-#else
-malloc_hook_ini(sz, caller)
-     size_t sz; const __malloc_ptr_t caller;
-#endif
-{
-  __malloc_hook = NULL;
-  ptmalloc_init();
-  return mALLOc(sz);
-}
-
-static Void_t*
-#if __STD_C
-realloc_hook_ini(Void_t* ptr, size_t sz, const __malloc_ptr_t caller)
-#else
-realloc_hook_ini(ptr, sz, caller)
-     Void_t* ptr; size_t sz; const __malloc_ptr_t caller;
-#endif
-{
-  __malloc_hook = NULL;
-  __realloc_hook = NULL;
-  ptmalloc_init();
-  return rEALLOc(ptr, sz);
-}
-
-static Void_t*
-#if __STD_C
-memalign_hook_ini(size_t alignment, size_t sz, const __malloc_ptr_t caller)
-#else
-memalign_hook_ini(alignment, sz, caller)
-     size_t alignment; size_t sz; const __malloc_ptr_t caller;
-#endif
-{
-  __memalign_hook = NULL;
-  ptmalloc_init();
-  return mEMALIGn(alignment, sz);
-}
-
-void weak_variable (*__malloc_initialize_hook) __MALLOC_P ((void)) = NULL;
-void weak_variable (*__free_hook) __MALLOC_P ((__malloc_ptr_t __ptr,
-					       const __malloc_ptr_t)) = NULL;
-__malloc_ptr_t weak_variable (*__malloc_hook)
- __MALLOC_P ((size_t __size, const __malloc_ptr_t)) = malloc_hook_ini;
-__malloc_ptr_t weak_variable (*__realloc_hook)
- __MALLOC_P ((__malloc_ptr_t __ptr, size_t __size, const __malloc_ptr_t))
-     = realloc_hook_ini;
-__malloc_ptr_t weak_variable (*__memalign_hook)
- __MALLOC_P ((size_t __alignment, size_t __size, const __malloc_ptr_t))
-     = memalign_hook_ini;
-void weak_variable (*__after_morecore_hook) __MALLOC_P ((void)) = NULL;
-
-/* Whether we are using malloc checking.  */
-static int using_malloc_checking;
-
-/* A flag that is set by malloc_set_state, to signal that malloc checking
-   must not be enabled on the request from the user (via the MALLOC_CHECK_
-   environment variable).  It is reset by __malloc_check_init to tell
-   malloc_set_state that the user has requested malloc checking.
-
-   The purpose of this flag is to make sure that malloc checking is not
-   enabled when the heap to be restored was constructed without malloc
-   checking, and thus does not contain the required magic bytes.
-   Otherwise the heap would be corrupted by calls to free and realloc.  If
-   it turns out that the heap was created with malloc checking and the
-   user has requested it malloc_set_state just calls __malloc_check_init
-   again to enable it.  On the other hand, reusing such a heap without
-   further malloc checking is safe.  */
-static int disallow_malloc_check;
-
-/* Activate a standard set of debugging hooks. */
-void
-__malloc_check_init()
-{
-  if (disallow_malloc_check) {
-    disallow_malloc_check = 0;
-    return;
-  }
-  using_malloc_checking = 1;
-  __malloc_hook = malloc_check;
-  __free_hook = free_check;
-  __realloc_hook = realloc_check;
-  __memalign_hook = memalign_check;
-  if(check_action & 1)
-    fprintf(stderr, "malloc: using debugging hooks\n");
-}
-
-#endif
-
-
-
-
-
-/* Routines dealing with mmap(). */
-
-#if HAVE_MMAP
-
-#ifndef MAP_ANONYMOUS
-
-static int dev_zero_fd = -1; /* Cached file descriptor for /dev/zero. */
-
-#define MMAP(addr, size, prot, flags) ((dev_zero_fd < 0) ? \
- (dev_zero_fd = open("/dev/zero", O_RDWR), \
-  mmap((addr), (size), (prot), (flags), dev_zero_fd, 0)) : \
-   mmap((addr), (size), (prot), (flags), dev_zero_fd, 0))
-
-#else
-
-#define MMAP(addr, size, prot, flags) \
- (mmap((addr), (size), (prot), (flags)|MAP_ANONYMOUS, -1, 0))
-
-#endif
-
-#if defined __GNUC__ && __GNUC__ >= 2
-/* This function is only called from one place, inline it.  */
-__inline__
-#endif
-static mchunkptr
-internal_function
-#if __STD_C
-mmap_chunk(size_t size)
-#else
-mmap_chunk(size) size_t size;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  mchunkptr p;
-
-  /* For mmapped chunks, the overhead is one SIZE_SZ unit larger, because
-   * there is no following chunk whose prev_size field could be used.
-   */
-  size = (size + SIZE_SZ + page_mask) & ~page_mask;
-
-  p = (mchunkptr)MMAP(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE);
-  if(p == (mchunkptr) MAP_FAILED) return 0;
-
-  n_mmaps++;
-  if (n_mmaps > max_n_mmaps) max_n_mmaps = n_mmaps;
-
-  /* We demand that eight bytes into a page must be 8-byte aligned. */
-  assert(aligned_OK(chunk2mem(p)));
-
-  /* The offset to the start of the mmapped region is stored
-   * in the prev_size field of the chunk; normally it is zero,
-   * but that can be changed in memalign().
-   */
-  p->prev_size = 0;
-  set_head(p, size|IS_MMAPPED);
-
-  mmapped_mem += size;
-  if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem)
-    max_mmapped_mem = mmapped_mem;
-#ifdef NO_THREADS
-  if ((unsigned long)(mmapped_mem + arena_mem + sbrked_mem) > max_total_mem)
-    max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-  return p;
-}
-
-static void
-internal_function
-#if __STD_C
-munmap_chunk(mchunkptr p)
-#else
-munmap_chunk(p) mchunkptr p;
-#endif
-{
-  INTERNAL_SIZE_T size = chunksize(p);
-  int ret;
-
-  assert (chunk_is_mmapped(p));
-  assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
-  assert((n_mmaps > 0));
-  assert(((p->prev_size + size) & (malloc_getpagesize-1)) == 0);
-
-  n_mmaps--;
-  mmapped_mem -= (size + p->prev_size);
-
-  ret = munmap((char *)p - p->prev_size, size + p->prev_size);
-
-  /* munmap returns non-zero on failure */
-  assert(ret == 0);
-}
-
-#if HAVE_MREMAP
-
-static mchunkptr
-internal_function
-#if __STD_C
-mremap_chunk(mchunkptr p, size_t new_size)
-#else
-mremap_chunk(p, new_size) mchunkptr p; size_t new_size;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  INTERNAL_SIZE_T offset = p->prev_size;
-  INTERNAL_SIZE_T size = chunksize(p);
-  char *cp;
-
-  assert (chunk_is_mmapped(p));
-  assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem));
-  assert((n_mmaps > 0));
-  assert(((size + offset) & (malloc_getpagesize-1)) == 0);
-
-  /* Note the extra SIZE_SZ overhead as in mmap_chunk(). */
-  new_size = (new_size + offset + SIZE_SZ + page_mask) & ~page_mask;
-
-  cp = (char *)mremap((char *)p - offset, size + offset, new_size,
-                      MREMAP_MAYMOVE);
-
-  if (cp == MAP_FAILED) return 0;
-
-  p = (mchunkptr)(cp + offset);
-
-  assert(aligned_OK(chunk2mem(p)));
-
-  assert((p->prev_size == offset));
-  set_head(p, (new_size - offset)|IS_MMAPPED);
-
-  mmapped_mem -= size + offset;
-  mmapped_mem += new_size;
-  if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem)
-    max_mmapped_mem = mmapped_mem;
-#ifdef NO_THREADS
-  if ((unsigned long)(mmapped_mem + arena_mem + sbrked_mem) > max_total_mem)
-    max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-  return p;
-}
-
-#endif /* HAVE_MREMAP */
-
-#endif /* HAVE_MMAP */
-
-
-
-/* Managing heaps and arenas (for concurrent threads) */
-
-#if USE_ARENAS
-
-/* Create a new heap.  size is automatically rounded up to a multiple
-   of the page size. */
-
-static heap_info *
-internal_function
-#if __STD_C
-new_heap(size_t size)
-#else
-new_heap(size) size_t size;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  char *p1, *p2;
-  unsigned long ul;
-  heap_info *h;
-
-  if(size+top_pad < HEAP_MIN_SIZE)
-    size = HEAP_MIN_SIZE;
-  else if(size+top_pad <= HEAP_MAX_SIZE)
-    size += top_pad;
-  else if(size > HEAP_MAX_SIZE)
-    return 0;
-  else
-    size = HEAP_MAX_SIZE;
-  size = (size + page_mask) & ~page_mask;
-
-  /* A memory region aligned to a multiple of HEAP_MAX_SIZE is needed.
-     No swap space needs to be reserved for the following large
-     mapping (on Linux, this is the case for all non-writable mappings
-     anyway). */
-  p1 = (char *)MMAP(0, HEAP_MAX_SIZE<<1, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE);
-  if(p1 != MAP_FAILED) {
-    p2 = (char *)(((unsigned long)p1 + (HEAP_MAX_SIZE-1)) & ~(HEAP_MAX_SIZE-1));
-    ul = p2 - p1;
-    if (ul)
-      munmap(p1, ul);
-    munmap(p2 + HEAP_MAX_SIZE, HEAP_MAX_SIZE - ul);
-  } else {
-    /* Try to take the chance that an allocation of only HEAP_MAX_SIZE
-       is already aligned. */
-    p2 = (char *)MMAP(0, HEAP_MAX_SIZE, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE);
-    if(p2 == MAP_FAILED)
-      return 0;
-    if((unsigned long)p2 & (HEAP_MAX_SIZE-1)) {
-      munmap(p2, HEAP_MAX_SIZE);
-      return 0;
-    }
-  }
-  if(MMAP(p2, size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED)
-     == (char *) MAP_FAILED) {
-    munmap(p2, HEAP_MAX_SIZE);
-    return 0;
-  }
-  h = (heap_info *)p2;
-  h->size = size;
-  THREAD_STAT(stat_n_heaps++);
-  return h;
-}
-
-/* Grow or shrink a heap.  size is automatically rounded up to a
-   multiple of the page size if it is positive. */
-
-static int
-#if __STD_C
-grow_heap(heap_info *h, long diff)
-#else
-grow_heap(h, diff) heap_info *h; long diff;
-#endif
-{
-  size_t page_mask = malloc_getpagesize - 1;
-  long new_size;
-
-  if(diff >= 0) {
-    diff = (diff + page_mask) & ~page_mask;
-    new_size = (long)h->size + diff;
-    if(new_size > HEAP_MAX_SIZE)
-      return -1;
-    if(MMAP((char *)h + h->size, diff, PROT_READ|PROT_WRITE,
-	    MAP_PRIVATE|MAP_FIXED) == (char *) MAP_FAILED)
-      return -2;
-  } else {
-    new_size = (long)h->size + diff;
-    if(new_size < (long)sizeof(*h))
-      return -1;
-    /* Try to re-map the extra heap space freshly to save memory, and
-       make it inaccessible. */
-    if((char *)MMAP((char *)h + new_size, -diff, PROT_NONE,
-                    MAP_PRIVATE|MAP_FIXED) == (char *) MAP_FAILED)
-      return -2;
-  }
-  h->size = new_size;
-  return 0;
-}
-
-/* Delete a heap. */
-
-#define delete_heap(heap) munmap((char*)(heap), HEAP_MAX_SIZE)
-
-/* arena_get() acquires an arena and locks the corresponding mutex.
-   First, try the one last locked successfully by this thread.  (This
-   is the common case and handled with a macro for speed.)  Then, loop
-   once over the circularly linked list of arenas.  If no arena is
-   readily available, create a new one.  In this latter case, `size'
-   is just a hint as to how much memory will be required immediately
-   in the new arena. */
-
-#define arena_get(ptr, size) do { \
-  Void_t *vptr = NULL; \
-  ptr = (arena *)tsd_getspecific(arena_key, vptr); \
-  if(ptr && !mutex_trylock(&ptr->mutex)) { \
-    THREAD_STAT(++(ptr->stat_lock_direct)); \
-  } else \
-    ptr = arena_get2(ptr, (size)); \
-} while(0)
-
-static arena *
-internal_function
-#if __STD_C
-arena_get2(arena *a_tsd, size_t size)
-#else
-arena_get2(a_tsd, size) arena *a_tsd; size_t size;
-#endif
-{
-  arena *a;
-  heap_info *h;
-  char *ptr;
-  int i;
-  unsigned long misalign;
-
-  if(!a_tsd)
-    a = a_tsd = &main_arena;
-  else {
-    a = a_tsd->next;
-    if(!a) {
-      /* This can only happen while initializing the new arena. */
-      (void)mutex_lock(&main_arena.mutex);
-      THREAD_STAT(++(main_arena.stat_lock_wait));
-      return &main_arena;
-    }
-  }
-
-  /* Check the global, circularly linked list for available arenas. */
- repeat:
-  do {
-    if(!mutex_trylock(&a->mutex)) {
-      THREAD_STAT(++(a->stat_lock_loop));
-      tsd_setspecific(arena_key, (Void_t *)a);
-      return a;
-    }
-    a = a->next;
-  } while(a != a_tsd);
-
-  /* If not even the list_lock can be obtained, try again.  This can
-     happen during `atfork', or for example on systems where thread
-     creation makes it temporarily impossible to obtain _any_
-     locks. */
-  if(mutex_trylock(&list_lock)) {
-    a = a_tsd;
-    goto repeat;
-  }
-  (void)mutex_unlock(&list_lock);
-
-  /* Nothing immediately available, so generate a new arena. */
-  h = new_heap(size + (sizeof(*h) + sizeof(*a) + MALLOC_ALIGNMENT));
-  if(!h) {
-    /* Maybe size is too large to fit in a single heap.  So, just try
-       to create a minimally-sized arena and let chunk_alloc() attempt
-       to deal with the large request via mmap_chunk(). */
-    h = new_heap(sizeof(*h) + sizeof(*a) + MALLOC_ALIGNMENT);
-    if(!h)
-      return 0;
-  }
-  a = h->ar_ptr = (arena *)(h+1);
-  for(i=0; i<NAV; i++)
-    init_bin(a, i);
-  a->next = NULL;
-  a->size = h->size;
-  arena_mem += h->size;
-#ifdef NO_THREADS
-  if((unsigned long)(mmapped_mem + arena_mem + sbrked_mem) > max_total_mem)
-    max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-  tsd_setspecific(arena_key, (Void_t *)a);
-  mutex_init(&a->mutex);
-  i = mutex_lock(&a->mutex); /* remember result */
-
-  /* Set up the top chunk, with proper alignment. */
-  ptr = (char *)(a + 1);
-  misalign = (unsigned long)chunk2mem(ptr) & MALLOC_ALIGN_MASK;
-  if (misalign > 0)
-    ptr += MALLOC_ALIGNMENT - misalign;
-  top(a) = (mchunkptr)ptr;
-  set_head(top(a), (((char*)h + h->size) - ptr) | PREV_INUSE);
-
-  /* Add the new arena to the list. */
-  (void)mutex_lock(&list_lock);
-  a->next = main_arena.next;
-  main_arena.next = a;
-  (void)mutex_unlock(&list_lock);
-
-  if(i) /* locking failed; keep arena for further attempts later */
-    return 0;
-
-  THREAD_STAT(++(a->stat_lock_loop));
-  return a;
-}
-
-/* find the heap and corresponding arena for a given ptr */
-
-#define heap_for_ptr(ptr) \
- ((heap_info *)((unsigned long)(ptr) & ~(HEAP_MAX_SIZE-1)))
-#define arena_for_ptr(ptr) \
- (((mchunkptr)(ptr) < top(&main_arena) && (char *)(ptr) >= sbrk_base) ? \
-  &main_arena : heap_for_ptr(ptr)->ar_ptr)
-
-#else /* !USE_ARENAS */
-
-/* There is only one arena, main_arena. */
-
-#define arena_get(ptr, sz) (ptr = &main_arena)
-#define arena_for_ptr(ptr) (&main_arena)
-
-#endif /* USE_ARENAS */
-
-
-
-/*
-  Debugging support
-*/
-
-#if MALLOC_DEBUG
-
-
-/*
-  These routines make a number of assertions about the states
-  of data structures that should be true at all times. If any
-  are not true, it's very likely that a user program has somehow
-  trashed memory. (It's also possible that there is a coding error
-  in malloc. In which case, please report it!)
-*/
-
-#if __STD_C
-static void do_check_chunk(arena *ar_ptr, mchunkptr p)
-#else
-static void do_check_chunk(ar_ptr, p) arena *ar_ptr; mchunkptr p;
-#endif
-{
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-
-  /* No checkable chunk is mmapped */
-  assert(!chunk_is_mmapped(p));
-
-#if USE_ARENAS
-  if(ar_ptr != &main_arena) {
-    heap_info *heap = heap_for_ptr(p);
-    assert(heap->ar_ptr == ar_ptr);
-    if(p != top(ar_ptr))
-      assert((char *)p + sz <= (char *)heap + heap->size);
-    else
-      assert((char *)p + sz == (char *)heap + heap->size);
-    return;
-  }
-#endif
-
-  /* Check for legal address ... */
-  assert((char*)p >= sbrk_base);
-  if (p != top(ar_ptr))
-    assert((char*)p + sz <= (char*)top(ar_ptr));
-  else
-    assert((char*)p + sz <= sbrk_base + sbrked_mem);
-
-}
-
-
-#if __STD_C
-static void do_check_free_chunk(arena *ar_ptr, mchunkptr p)
-#else
-static void do_check_free_chunk(ar_ptr, p) arena *ar_ptr; mchunkptr p;
-#endif
-{
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-  mchunkptr next = chunk_at_offset(p, sz);
-
-  do_check_chunk(ar_ptr, p);
-
-  /* Check whether it claims to be free ... */
-  assert(!inuse(p));
-
-  /* Must have OK size and fields */
-  assert((long)sz >= (long)MINSIZE);
-  assert((sz & MALLOC_ALIGN_MASK) == 0);
-  assert(aligned_OK(chunk2mem(p)));
-  /* ... matching footer field */
-  assert(next->prev_size == sz);
-  /* ... and is fully consolidated */
-  assert(prev_inuse(p));
-  assert (next == top(ar_ptr) || inuse(next));
-
-  /* ... and has minimally sane links */
-  assert(p->fd->bk == p);
-  assert(p->bk->fd == p);
-}
-
-#if __STD_C
-static void do_check_inuse_chunk(arena *ar_ptr, mchunkptr p)
-#else
-static void do_check_inuse_chunk(ar_ptr, p) arena *ar_ptr; mchunkptr p;
-#endif
-{
-  mchunkptr next = next_chunk(p);
-  do_check_chunk(ar_ptr, p);
-
-  /* Check whether it claims to be in use ... */
-  assert(inuse(p));
-
-  /* ... whether its size is OK (it might be a fencepost) ... */
-  assert(chunksize(p) >= MINSIZE || next->size == (0|PREV_INUSE));
-
-  /* ... and is surrounded by OK chunks.
-    Since more things can be checked with free chunks than inuse ones,
-    if an inuse chunk borders them and debug is on, it's worth doing them.
-  */
-  if (!prev_inuse(p))
-  {
-    mchunkptr prv = prev_chunk(p);
-    assert(next_chunk(prv) == p);
-    do_check_free_chunk(ar_ptr, prv);
-  }
-  if (next == top(ar_ptr))
-  {
-    assert(prev_inuse(next));
-    assert(chunksize(next) >= MINSIZE);
-  }
-  else if (!inuse(next))
-    do_check_free_chunk(ar_ptr, next);
-
-}
-
-#if __STD_C
-static void do_check_malloced_chunk(arena *ar_ptr,
-                                    mchunkptr p, INTERNAL_SIZE_T s)
-#else
-static void do_check_malloced_chunk(ar_ptr, p, s)
-arena *ar_ptr; mchunkptr p; INTERNAL_SIZE_T s;
-#endif
-{
-  INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE;
-  long room = sz - s;
-
-  do_check_inuse_chunk(ar_ptr, p);
-
-  /* Legal size ... */
-  assert((long)sz >= (long)MINSIZE);
-  assert((sz & MALLOC_ALIGN_MASK) == 0);
-  assert(room >= 0);
-  assert(room < (long)MINSIZE);
-
-  /* ... and alignment */
-  assert(aligned_OK(chunk2mem(p)));
-
-
-  /* ... and was allocated at front of an available chunk */
-  assert(prev_inuse(p));
-
-}
-
-
-#define check_free_chunk(A,P) do_check_free_chunk(A,P)
-#define check_inuse_chunk(A,P) do_check_inuse_chunk(A,P)
-#define check_chunk(A,P) do_check_chunk(A,P)
-#define check_malloced_chunk(A,P,N) do_check_malloced_chunk(A,P,N)
-#else
-#define check_free_chunk(A,P)
-#define check_inuse_chunk(A,P)
-#define check_chunk(A,P)
-#define check_malloced_chunk(A,P,N)
-#endif
-
-
-
-/*
-  Macro-based internal utilities
-*/
-
-
-/*
-  Linking chunks in bin lists.
-  Call these only with variables, not arbitrary expressions, as arguments.
-*/
-
-/*
-  Place chunk p of size s in its bin, in size order,
-  putting it ahead of others of same size.
-*/
-
-
-#define frontlink(A, P, S, IDX, BK, FD)                                       \
-{                                                                             \
-  if (S < MAX_SMALLBIN_SIZE)                                                  \
-  {                                                                           \
-    IDX = smallbin_index(S);                                                  \
-    mark_binblock(A, IDX);                                                    \
-    BK = bin_at(A, IDX);                                                      \
-    FD = BK->fd;                                                              \
-    P->bk = BK;                                                               \
-    P->fd = FD;                                                               \
-    FD->bk = BK->fd = P;                                                      \
-  }                                                                           \
-  else                                                                        \
-  {                                                                           \
-    IDX = bin_index(S);                                                       \
-    BK = bin_at(A, IDX);                                                      \
-    FD = BK->fd;                                                              \
-    if (FD == BK) mark_binblock(A, IDX);                                      \
-    else                                                                      \
-    {                                                                         \
-      while (FD != BK && S < chunksize(FD)) FD = FD->fd;                      \
-      BK = FD->bk;                                                            \
-    }                                                                         \
-    P->bk = BK;                                                               \
-    P->fd = FD;                                                               \
-    FD->bk = BK->fd = P;                                                      \
-  }                                                                           \
-}
-
-
-/* take a chunk off a list */
-
-#define unlink(P, BK, FD)                                                     \
-{                                                                             \
-  BK = P->bk;                                                                 \
-  FD = P->fd;                                                                 \
-  FD->bk = BK;                                                                \
-  BK->fd = FD;                                                                \
-}                                                                             \
-
-/* Place p as the last remainder */
-
-#define link_last_remainder(A, P)                                             \
-{                                                                             \
-  last_remainder(A)->fd = last_remainder(A)->bk = P;                          \
-  P->fd = P->bk = last_remainder(A);                                          \
-}
-
-/* Clear the last_remainder bin */
-
-#define clear_last_remainder(A) \
-  (last_remainder(A)->fd = last_remainder(A)->bk = last_remainder(A))
-
-
-
-
-
-/*
-  Extend the top-most chunk by obtaining memory from system.
-  Main interface to sbrk (but see also malloc_trim).
-*/
-
-#if defined __GNUC__ && __GNUC__ >= 2
-/* This function is called only from one place, inline it.  */
-__inline__
-#endif
-static void
-internal_function
-#if __STD_C
-malloc_extend_top(arena *ar_ptr, INTERNAL_SIZE_T nb)
-#else
-malloc_extend_top(ar_ptr, nb) arena *ar_ptr; INTERNAL_SIZE_T nb;
-#endif
-{
-  unsigned long pagesz   = malloc_getpagesize;
-  mchunkptr old_top      = top(ar_ptr);        /* Record state of old top */
-  INTERNAL_SIZE_T old_top_size = chunksize(old_top);
-  INTERNAL_SIZE_T top_size;                    /* new size of top chunk */
-
-#if USE_ARENAS
-  if(ar_ptr == &main_arena) {
-#endif
-
-    char*     brk;                  /* return value from sbrk */
-    INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of sbrked space */
-    INTERNAL_SIZE_T correction;     /* bytes for 2nd sbrk call */
-    char*     new_brk;              /* return of 2nd sbrk call */
-    char*     old_end = (char*)(chunk_at_offset(old_top, old_top_size));
-
-    /* Pad request with top_pad plus minimal overhead */
-    INTERNAL_SIZE_T sbrk_size = nb + top_pad + MINSIZE;
-
-    /* If not the first time through, round to preserve page boundary */
-    /* Otherwise, we need to correct to a page size below anyway. */
-    /* (We also correct below if an intervening foreign sbrk call.) */
-
-    if (sbrk_base != (char*)(-1))
-      sbrk_size = (sbrk_size + (pagesz - 1)) & ~(pagesz - 1);
-
-    brk = (char*)(MORECORE (sbrk_size));
-
-    /* Fail if sbrk failed or if a foreign sbrk call killed our space */
-    if (brk == (char*)(MORECORE_FAILURE) ||
-        (brk < old_end && old_top != initial_top(&main_arena)))
-      return;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-    /* Call the `morecore' hook if necessary.  */
-    if (__after_morecore_hook)
-      (*__after_morecore_hook) ();
-#endif
-
-    sbrked_mem += sbrk_size;
-
-    if (brk == old_end) { /* can just add bytes to current top */
-      top_size = sbrk_size + old_top_size;
-      set_head(old_top, top_size | PREV_INUSE);
-      old_top = 0; /* don't free below */
-    } else {
-      if (sbrk_base == (char*)(-1)) /* First time through. Record base */
-        sbrk_base = brk;
-      else
-        /* Someone else called sbrk().  Count those bytes as sbrked_mem. */
-        sbrked_mem += brk - (char*)old_end;
-
-      /* Guarantee alignment of first new chunk made from this space */
-      front_misalign = (unsigned long)chunk2mem(brk) & MALLOC_ALIGN_MASK;
-      if (front_misalign > 0) {
-        correction = (MALLOC_ALIGNMENT) - front_misalign;
-        brk += correction;
-      } else
-        correction = 0;
-
-      /* Guarantee the next brk will be at a page boundary */
-      correction += pagesz - ((unsigned long)(brk + sbrk_size) & (pagesz - 1));
-
-      /* Allocate correction */
-      new_brk = (char*)(MORECORE (correction));
-      if (new_brk == (char*)(MORECORE_FAILURE)) return;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-      /* Call the `morecore' hook if necessary.  */
-      if (__after_morecore_hook)
-        (*__after_morecore_hook) ();
-#endif
-
-      sbrked_mem += correction;
-
-      top(&main_arena) = chunk_at_offset(brk, 0);
-      top_size = new_brk - brk + correction;
-      set_head(top(&main_arena), top_size | PREV_INUSE);
-
-      if (old_top == initial_top(&main_arena))
-        old_top = 0; /* don't free below */
-    }
-
-    if ((unsigned long)sbrked_mem > (unsigned long)max_sbrked_mem)
-      max_sbrked_mem = sbrked_mem;
-#ifdef NO_THREADS
-    if ((unsigned long)(mmapped_mem + arena_mem + sbrked_mem) > max_total_mem)
-      max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-
-#if USE_ARENAS
-  } else { /* ar_ptr != &main_arena */
-    heap_info *old_heap, *heap;
-    size_t old_heap_size;
-
-    if(old_top_size < MINSIZE) /* this should never happen */
-      return;
-
-    /* First try to extend the current heap. */
-    if(MINSIZE + nb <= old_top_size)
-      return;
-    old_heap = heap_for_ptr(old_top);
-    old_heap_size = old_heap->size;
-    if(grow_heap(old_heap, MINSIZE + nb - old_top_size) == 0) {
-      ar_ptr->size += old_heap->size - old_heap_size;
-      arena_mem += old_heap->size - old_heap_size;
-#ifdef NO_THREADS
-      if(mmapped_mem + arena_mem + sbrked_mem > max_total_mem)
-        max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-      top_size = ((char *)old_heap + old_heap->size) - (char *)old_top;
-      set_head(old_top, top_size | PREV_INUSE);
-      return;
-    }
-
-    /* A new heap must be created. */
-    heap = new_heap(nb + (MINSIZE + sizeof(*heap)));
-    if(!heap)
-      return;
-    heap->ar_ptr = ar_ptr;
-    heap->prev = old_heap;
-    ar_ptr->size += heap->size;
-    arena_mem += heap->size;
-#ifdef NO_THREADS
-    if((unsigned long)(mmapped_mem + arena_mem + sbrked_mem) > max_total_mem)
-      max_total_mem = mmapped_mem + arena_mem + sbrked_mem;
-#endif
-
-    /* Set up the new top, so we can safely use chunk_free() below. */
-    top(ar_ptr) = chunk_at_offset(heap, sizeof(*heap));
-    top_size = heap->size - sizeof(*heap);
-    set_head(top(ar_ptr), top_size | PREV_INUSE);
-  }
-#endif /* USE_ARENAS */
-
-  /* We always land on a page boundary */
-  assert(((unsigned long)((char*)top(ar_ptr) + top_size) & (pagesz-1)) == 0);
-
-  /* Setup fencepost and free the old top chunk. */
-  if(old_top) {
-    /* The fencepost takes at least MINSIZE bytes, because it might
-       become the top chunk again later.  Note that a footer is set
-       up, too, although the chunk is marked in use. */
-    old_top_size -= MINSIZE;
-    set_head(chunk_at_offset(old_top, old_top_size + 2*SIZE_SZ), 0|PREV_INUSE);
-    if(old_top_size >= MINSIZE) {
-      set_head(chunk_at_offset(old_top, old_top_size), (2*SIZE_SZ)|PREV_INUSE);
-      set_foot(chunk_at_offset(old_top, old_top_size), (2*SIZE_SZ));
-      set_head_size(old_top, old_top_size);
-      chunk_free(ar_ptr, old_top);
-    } else {
-      set_head(old_top, (old_top_size + 2*SIZE_SZ)|PREV_INUSE);
-      set_foot(old_top, (old_top_size + 2*SIZE_SZ));
-    }
-  }
-}
-
-
-
-
-/* Main public routines */
-
-
-/*
-  Malloc Algorithm:
-
-    The requested size is first converted into a usable form, `nb'.
-    This currently means to add 4 bytes overhead plus possibly more to
-    obtain 8-byte alignment and/or to obtain a size of at least
-    MINSIZE (currently 16, 24, or 32 bytes), the smallest allocatable
-    size.  (All fits are considered `exact' if they are within MINSIZE
-    bytes.)
-
-    From there, the first successful of the following steps is taken:
-
-      1. The bin corresponding to the request size is scanned, and if
-         a chunk of exactly the right size is found, it is taken.
-
-      2. The most recently remaindered chunk is used if it is big
-         enough.  This is a form of (roving) first fit, used only in
-         the absence of exact fits. Runs of consecutive requests use
-         the remainder of the chunk used for the previous such request
-         whenever possible. This limited use of a first-fit style
-         allocation strategy tends to give contiguous chunks
-         coextensive lifetimes, which improves locality and can reduce
-         fragmentation in the long run.
-
-      3. Other bins are scanned in increasing size order, using a
-         chunk big enough to fulfill the request, and splitting off
-         any remainder.  This search is strictly by best-fit; i.e.,
-         the smallest (with ties going to approximately the least
-         recently used) chunk that fits is selected.
-
-      4. If large enough, the chunk bordering the end of memory
-         (`top') is split off. (This use of `top' is in accord with
-         the best-fit search rule.  In effect, `top' is treated as
-         larger (and thus less well fitting) than any other available
-         chunk since it can be extended to be as large as necessary
-         (up to system limitations).
-
-      5. If the request size meets the mmap threshold and the
-         system supports mmap, and there are few enough currently
-         allocated mmapped regions, and a call to mmap succeeds,
-         the request is allocated via direct memory mapping.
-
-      6. Otherwise, the top of memory is extended by
-         obtaining more space from the system (normally using sbrk,
-         but definable to anything else via the MORECORE macro).
-         Memory is gathered from the system (in system page-sized
-         units) in a way that allows chunks obtained across different
-         sbrk calls to be consolidated, but does not require
-         contiguous memory. Thus, it should be safe to intersperse
-         mallocs with other sbrk calls.
-
-
-      All allocations are made from the `lowest' part of any found
-      chunk. (The implementation invariant is that prev_inuse is
-      always true of any allocated chunk; i.e., that each allocated
-      chunk borders either a previously allocated and still in-use chunk,
-      or the base of its memory arena.)
-
-*/
-
-#if __STD_C
-Void_t* mALLOc(size_t bytes)
-#else
-Void_t* mALLOc(bytes) size_t bytes;
-#endif
-{
-  arena *ar_ptr;
-  INTERNAL_SIZE_T nb; /* padded request size */
-  mchunkptr victim;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  __malloc_ptr_t (*hook) __MALLOC_PMT ((size_t, __const __malloc_ptr_t)) =
-      __malloc_hook;
-  if (hook != NULL) {
-    Void_t* result;
-
-#if defined __GNUC__ && __GNUC__ >= 2
-    result = (*hook)(bytes, RETURN_ADDRESS (0));
-#else
-    result = (*hook)(bytes, NULL);
-#endif
-    return result;
-  }
-#endif
-
-  if(request2size(bytes, nb))
-    return 0;
-  arena_get(ar_ptr, nb);
-  if(!ar_ptr)
-    return 0;
-  victim = chunk_alloc(ar_ptr, nb);
-  if(!victim) {
-    /* Maybe the failure is due to running out of mmapped areas. */
-    if(ar_ptr != &main_arena) {
-      (void)mutex_unlock(&ar_ptr->mutex);
-      (void)mutex_lock(&main_arena.mutex);
-      victim = chunk_alloc(&main_arena, nb);
-      (void)mutex_unlock(&main_arena.mutex);
-    } else {
-#if USE_ARENAS
-      /* ... or sbrk() has failed and there is still a chance to mmap() */
-      ar_ptr = arena_get2(ar_ptr->next ? ar_ptr : 0, nb);
-      (void)mutex_unlock(&main_arena.mutex);
-      if(ar_ptr) {
-        victim = chunk_alloc(ar_ptr, nb);
-        (void)mutex_unlock(&ar_ptr->mutex);
-      }
-#endif
-    }
-    if(!victim) return 0;
-  } else
-    (void)mutex_unlock(&ar_ptr->mutex);
-  return BOUNDED_N(chunk2mem(victim), bytes);
-}
-
-static mchunkptr
-internal_function
-#if __STD_C
-chunk_alloc(arena *ar_ptr, INTERNAL_SIZE_T nb)
-#else
-chunk_alloc(ar_ptr, nb) arena *ar_ptr; INTERNAL_SIZE_T nb;
-#endif
-{
-  mchunkptr victim;                  /* inspected/selected chunk */
-  INTERNAL_SIZE_T victim_size;       /* its size */
-  int       idx;                     /* index for bin traversal */
-  mbinptr   bin;                     /* associated bin */
-  mchunkptr remainder;               /* remainder from a split */
-  long      remainder_size;          /* its size */
-  int       remainder_index;         /* its bin index */
-  unsigned long block;               /* block traverser bit */
-  int       startidx;                /* first bin of a traversed block */
-  mchunkptr fwd;                     /* misc temp for linking */
-  mchunkptr bck;                     /* misc temp for linking */
-  mbinptr q;                         /* misc temp */
-
-
-  /* Check for exact match in a bin */
-
-  if (is_small_request(nb))  /* Faster version for small requests */
-  {
-    idx = smallbin_index(nb);
-
-    /* No traversal or size check necessary for small bins.  */
-
-    q = _bin_at(ar_ptr, idx);
-    victim = last(q);
-
-    /* Also scan the next one, since it would have a remainder < MINSIZE */
-    if (victim == q)
-    {
-      q = next_bin(q);
-      victim = last(q);
-    }
-    if (victim != q)
-    {
-      victim_size = chunksize(victim);
-      unlink(victim, bck, fwd);
-      set_inuse_bit_at_offset(victim, victim_size);
-      check_malloced_chunk(ar_ptr, victim, nb);
-      return victim;
-    }
-
-    idx += 2; /* Set for bin scan below. We've already scanned 2 bins. */
-
-  }
-  else
-  {
-    idx = bin_index(nb);
-    bin = bin_at(ar_ptr, idx);
-
-    for (victim = last(bin); victim != bin; victim = victim->bk)
-    {
-      victim_size = chunksize(victim);
-      remainder_size = victim_size - nb;
-
-      if (remainder_size >= (long)MINSIZE) /* too big */
-      {
-        --idx; /* adjust to rescan below after checking last remainder */
-        break;
-      }
-
-      else if (remainder_size >= 0) /* exact fit */
-      {
-        unlink(victim, bck, fwd);
-        set_inuse_bit_at_offset(victim, victim_size);
-        check_malloced_chunk(ar_ptr, victim, nb);
-        return victim;
-      }
-    }
-
-    ++idx;
-
-  }
-
-  /* Try to use the last split-off remainder */
-
-  if ( (victim = last_remainder(ar_ptr)->fd) != last_remainder(ar_ptr))
-  {
-    victim_size = chunksize(victim);
-    remainder_size = victim_size - nb;
-
-    if (remainder_size >= (long)MINSIZE) /* re-split */
-    {
-      remainder = chunk_at_offset(victim, nb);
-      set_head(victim, nb | PREV_INUSE);
-      link_last_remainder(ar_ptr, remainder);
-      set_head(remainder, remainder_size | PREV_INUSE);
-      set_foot(remainder, remainder_size);
-      check_malloced_chunk(ar_ptr, victim, nb);
-      return victim;
-    }
-
-    clear_last_remainder(ar_ptr);
-
-    if (remainder_size >= 0)  /* exhaust */
-    {
-      set_inuse_bit_at_offset(victim, victim_size);
-      check_malloced_chunk(ar_ptr, victim, nb);
-      return victim;
-    }
-
-    /* Else place in bin */
-
-    frontlink(ar_ptr, victim, victim_size, remainder_index, bck, fwd);
-  }
-
-  /*
-     If there are any possibly nonempty big-enough blocks,
-     search for best fitting chunk by scanning bins in blockwidth units.
-  */
-
-  if ( (block = idx2binblock(idx)) <= binblocks(ar_ptr))
-  {
-
-    /* Get to the first marked block */
-
-    if ( (block & binblocks(ar_ptr)) == 0)
-    {
-      /* force to an even block boundary */
-      idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH;
-      block <<= 1;
-      while ((block & binblocks(ar_ptr)) == 0)
-      {
-        idx += BINBLOCKWIDTH;
-        block <<= 1;
-      }
-    }
-
-    /* For each possibly nonempty block ... */
-    for (;;)
-    {
-      startidx = idx;          /* (track incomplete blocks) */
-      q = bin = _bin_at(ar_ptr, idx);
-
-      /* For each bin in this block ... */
-      do
-      {
-        /* Find and use first big enough chunk ... */
-
-        for (victim = last(bin); victim != bin; victim = victim->bk)
-        {
-          victim_size = chunksize(victim);
-          remainder_size = victim_size - nb;
-
-          if (remainder_size >= (long)MINSIZE) /* split */
-          {
-            remainder = chunk_at_offset(victim, nb);
-            set_head(victim, nb | PREV_INUSE);
-            unlink(victim, bck, fwd);
-            link_last_remainder(ar_ptr, remainder);
-            set_head(remainder, remainder_size | PREV_INUSE);
-            set_foot(remainder, remainder_size);
-            check_malloced_chunk(ar_ptr, victim, nb);
-            return victim;
-          }
-
-          else if (remainder_size >= 0)  /* take */
-          {
-            set_inuse_bit_at_offset(victim, victim_size);
-            unlink(victim, bck, fwd);
-            check_malloced_chunk(ar_ptr, victim, nb);
-            return victim;
-          }
-
-        }
-
-       bin = next_bin(bin);
-
-      } while ((++idx & (BINBLOCKWIDTH - 1)) != 0);
-
-      /* Clear out the block bit. */
-
-      do   /* Possibly backtrack to try to clear a partial block */
-      {
-        if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
-        {
-          binblocks(ar_ptr) &= ~block;
-          break;
-        }
-        --startidx;
-        q = prev_bin(q);
-      } while (first(q) == q);
-
-      /* Get to the next possibly nonempty block */
-
-      if ( (block <<= 1) <= binblocks(ar_ptr) && (block != 0) )
-      {
-        while ((block & binblocks(ar_ptr)) == 0)
-        {
-          idx += BINBLOCKWIDTH;
-          block <<= 1;
-        }
-      }
-      else
-        break;
-    }
-  }
-
-
-  /* Try to use top chunk */
-
-  /* Require that there be a remainder, ensuring top always exists  */
-  if ( (remainder_size = chunksize(top(ar_ptr)) - nb) < (long)MINSIZE)
-  {
-
-#if HAVE_MMAP
-    /* If the request is big and there are not yet too many regions,
-       and we would otherwise need to extend, try to use mmap instead.  */
-    if ((unsigned long)nb >= (unsigned long)mmap_threshold &&
-        n_mmaps < n_mmaps_max &&
-        (victim = mmap_chunk(nb)) != 0)
-      return victim;
-#endif
-
-    /* Try to extend */
-    malloc_extend_top(ar_ptr, nb);
-    if ((remainder_size = chunksize(top(ar_ptr)) - nb) < (long)MINSIZE)
-    {
-#if HAVE_MMAP
-      /* A last attempt: when we are out of address space in a
-         non-main arena, try mmap anyway, as long as it is allowed at
-         all.  */
-      if (ar_ptr != &main_arena &&
-          n_mmaps_max > 0 &&
-          (victim = mmap_chunk(nb)) != 0)
-        return victim;
-#endif
-      return 0; /* propagate failure */
-    }
-  }
-
-  victim = top(ar_ptr);
-  set_head(victim, nb | PREV_INUSE);
-  top(ar_ptr) = chunk_at_offset(victim, nb);
-  set_head(top(ar_ptr), remainder_size | PREV_INUSE);
-  check_malloced_chunk(ar_ptr, victim, nb);
-  return victim;
-
-}
-
-
-
-
-/*
-
-  free() algorithm :
-
-    cases:
-
-       1. free(0) has no effect.
-
-       2. If the chunk was allocated via mmap, it is released via munmap().
-
-       3. If a returned chunk borders the current high end of memory,
-          it is consolidated into the top, and if the total unused
-          topmost memory exceeds the trim threshold, malloc_trim is
-          called.
-
-       4. Other chunks are consolidated as they arrive, and
-          placed in corresponding bins. (This includes the case of
-          consolidating with the current `last_remainder').
-
-*/
-
-
-#if __STD_C
-void fREe(Void_t* mem)
-#else
-void fREe(mem) Void_t* mem;
-#endif
-{
-  arena *ar_ptr;
-  mchunkptr p;                          /* chunk corresponding to mem */
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  void (*hook) __MALLOC_PMT ((__malloc_ptr_t, __const __malloc_ptr_t)) =
-    __free_hook;
-
-  if (hook != NULL) {
-#if defined __GNUC__ && __GNUC__ >= 2
-    (*hook)(mem, RETURN_ADDRESS (0));
-#else
-    (*hook)(mem, NULL);
-#endif
-    return;
-  }
-#endif
-
-  if (mem == 0)                              /* free(0) has no effect */
-    return;
-
-  p = mem2chunk(mem);
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(p))                       /* release mmapped memory. */
-  {
-    munmap_chunk(p);
-    return;
-  }
-#endif
-
-  ar_ptr = arena_for_ptr(p);
-#if THREAD_STATS
-  if(!mutex_trylock(&ar_ptr->mutex))
-    ++(ar_ptr->stat_lock_direct);
-  else {
-    (void)mutex_lock(&ar_ptr->mutex);
-    ++(ar_ptr->stat_lock_wait);
-  }
-#else
-  (void)mutex_lock(&ar_ptr->mutex);
-#endif
-  chunk_free(ar_ptr, p);
-  (void)mutex_unlock(&ar_ptr->mutex);
-}
-
-static void
-internal_function
-#if __STD_C
-chunk_free(arena *ar_ptr, mchunkptr p)
-#else
-chunk_free(ar_ptr, p) arena *ar_ptr; mchunkptr p;
-#endif
-{
-  INTERNAL_SIZE_T hd = p->size; /* its head field */
-  INTERNAL_SIZE_T sz;  /* its size */
-  int       idx;       /* its bin index */
-  mchunkptr next;      /* next contiguous chunk */
-  INTERNAL_SIZE_T nextsz; /* its size */
-  INTERNAL_SIZE_T prevsz; /* size of previous contiguous chunk */
-  mchunkptr bck;       /* misc temp for linking */
-  mchunkptr fwd;       /* misc temp for linking */
-  int       islr;      /* track whether merging with last_remainder */
-
-  check_inuse_chunk(ar_ptr, p);
-
-  sz = hd & ~PREV_INUSE;
-  next = chunk_at_offset(p, sz);
-  nextsz = chunksize(next);
-
-  if (next == top(ar_ptr))                         /* merge with top */
-  {
-    sz += nextsz;
-
-    if (!(hd & PREV_INUSE))                    /* consolidate backward */
-    {
-      prevsz = p->prev_size;
-      p = chunk_at_offset(p, -(long)prevsz);
-      sz += prevsz;
-      unlink(p, bck, fwd);
-    }
-
-    set_head(p, sz | PREV_INUSE);
-    top(ar_ptr) = p;
-
-#if USE_ARENAS
-    if(ar_ptr == &main_arena) {
-#endif
-      if ((unsigned long)(sz) >= (unsigned long)trim_threshold)
-        main_trim(top_pad);
-#if USE_ARENAS
-    } else {
-      heap_info *heap = heap_for_ptr(p);
-
-      assert(heap->ar_ptr == ar_ptr);
-
-      /* Try to get rid of completely empty heaps, if possible. */
-      if((unsigned long)(sz) >= (unsigned long)trim_threshold ||
-         p == chunk_at_offset(heap, sizeof(*heap)))
-        heap_trim(heap, top_pad);
-    }
-#endif
-    return;
-  }
-
-  islr = 0;
-
-  if (!(hd & PREV_INUSE))                    /* consolidate backward */
-  {
-    prevsz = p->prev_size;
-    p = chunk_at_offset(p, -(long)prevsz);
-    sz += prevsz;
-
-    if (p->fd == last_remainder(ar_ptr))     /* keep as last_remainder */
-      islr = 1;
-    else
-      unlink(p, bck, fwd);
-  }
-
-  if (!(inuse_bit_at_offset(next, nextsz)))   /* consolidate forward */
-  {
-    sz += nextsz;
-
-    if (!islr && next->fd == last_remainder(ar_ptr))
-                                              /* re-insert last_remainder */
-    {
-      islr = 1;
-      link_last_remainder(ar_ptr, p);
-    }
-    else
-      unlink(next, bck, fwd);
-
-    next = chunk_at_offset(p, sz);
-  }
-  else
-    set_head(next, nextsz);                  /* clear inuse bit */
-
-  set_head(p, sz | PREV_INUSE);
-  next->prev_size = sz;
-  if (!islr)
-    frontlink(ar_ptr, p, sz, idx, bck, fwd);
-
-#if USE_ARENAS
-  /* Check whether the heap containing top can go away now. */
-  if(next->size < MINSIZE &&
-     (unsigned long)sz > trim_threshold &&
-     ar_ptr != &main_arena) {                /* fencepost */
-    heap_info *heap = heap_for_ptr(top(ar_ptr));
-
-    if(top(ar_ptr) == chunk_at_offset(heap, sizeof(*heap)) &&
-       heap->prev == heap_for_ptr(p))
-      heap_trim(heap, top_pad);
-  }
-#endif
-}
-
-
-
-
-
-/*
-
-  Realloc algorithm:
-
-    Chunks that were obtained via mmap cannot be extended or shrunk
-    unless HAVE_MREMAP is defined, in which case mremap is used.
-    Otherwise, if their reallocation is for additional space, they are
-    copied.  If for less, they are just left alone.
-
-    Otherwise, if the reallocation is for additional space, and the
-    chunk can be extended, it is, else a malloc-copy-free sequence is
-    taken.  There are several different ways that a chunk could be
-    extended. All are tried:
-
-       * Extending forward into following adjacent free chunk.
-       * Shifting backwards, joining preceding adjacent space
-       * Both shifting backwards and extending forward.
-       * Extending into newly sbrked space
-
-    Unless the #define REALLOC_ZERO_BYTES_FREES is set, realloc with a
-    size argument of zero (re)allocates a minimum-sized chunk.
-
-    If the reallocation is for less space, and the new request is for
-    a `small' (<512 bytes) size, then the newly unused space is lopped
-    off and freed.
-
-    The old unix realloc convention of allowing the last-free'd chunk
-    to be used as an argument to realloc is no longer supported.
-    I don't know of any programs still relying on this feature,
-    and allowing it would also allow too many other incorrect
-    usages of realloc to be sensible.
-
-
-*/
-
-
-#if __STD_C
-Void_t* rEALLOc(Void_t* oldmem, size_t bytes)
-#else
-Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
-#endif
-{
-  arena *ar_ptr;
-  INTERNAL_SIZE_T    nb;      /* padded request size */
-
-  mchunkptr oldp;             /* chunk corresponding to oldmem */
-  INTERNAL_SIZE_T    oldsize; /* its size */
-
-  mchunkptr newp;             /* chunk to return */
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  __malloc_ptr_t (*hook) __MALLOC_PMT ((__malloc_ptr_t, size_t,
-                                        __const __malloc_ptr_t)) =
-    __realloc_hook;
-  if (hook != NULL) {
-    Void_t* result;
-
-#if defined __GNUC__ && __GNUC__ >= 2
-    result = (*hook)(oldmem, bytes, RETURN_ADDRESS (0));
-#else
-    result = (*hook)(oldmem, bytes, NULL);
-#endif
-    return result;
-  }
-#endif
-
-#ifdef REALLOC_ZERO_BYTES_FREES
-  if (bytes == 0 && oldmem != NULL) { fREe(oldmem); return 0; }
-#endif
-
-  /* realloc of null is supposed to be same as malloc */
-  if (oldmem == 0) return mALLOc(bytes);
-
-  oldp    = mem2chunk(oldmem);
-  oldsize = chunksize(oldp);
-
-  if(request2size(bytes, nb))
-    return 0;
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(oldp))
-  {
-    Void_t* newmem;
-
-#if HAVE_MREMAP
-    newp = mremap_chunk(oldp, nb);
-    if(newp)
-      return BOUNDED_N(chunk2mem(newp), bytes);
-#endif
-    /* Note the extra SIZE_SZ overhead. */
-    if(oldsize - SIZE_SZ >= nb) return oldmem; /* do nothing */
-    /* Must alloc, copy, free. */
-    newmem = mALLOc(bytes);
-    if (newmem == 0) return 0; /* propagate failure */
-    MALLOC_COPY(newmem, oldmem, oldsize - 2*SIZE_SZ, 0);
-    munmap_chunk(oldp);
-    return newmem;
-  }
-#endif
-
-  ar_ptr = arena_for_ptr(oldp);
-#if THREAD_STATS
-  if(!mutex_trylock(&ar_ptr->mutex))
-    ++(ar_ptr->stat_lock_direct);
-  else {
-    (void)mutex_lock(&ar_ptr->mutex);
-    ++(ar_ptr->stat_lock_wait);
-  }
-#else
-  (void)mutex_lock(&ar_ptr->mutex);
-#endif
-
-#ifndef NO_THREADS
-  /* As in malloc(), remember this arena for the next allocation. */
-  tsd_setspecific(arena_key, (Void_t *)ar_ptr);
-#endif
-
-  newp = chunk_realloc(ar_ptr, oldp, oldsize, nb);
-
-  (void)mutex_unlock(&ar_ptr->mutex);
-  return newp ? BOUNDED_N(chunk2mem(newp), bytes) : NULL;
-}
-
-static mchunkptr
-internal_function
-#if __STD_C
-chunk_realloc(arena* ar_ptr, mchunkptr oldp, INTERNAL_SIZE_T oldsize,
-              INTERNAL_SIZE_T nb)
-#else
-chunk_realloc(ar_ptr, oldp, oldsize, nb)
-arena* ar_ptr; mchunkptr oldp; INTERNAL_SIZE_T oldsize, nb;
-#endif
-{
-  mchunkptr newp = oldp;      /* chunk to return */
-  INTERNAL_SIZE_T newsize = oldsize; /* its size */
-
-  mchunkptr next;             /* next contiguous chunk after oldp */
-  INTERNAL_SIZE_T  nextsize;  /* its size */
-
-  mchunkptr prev;             /* previous contiguous chunk before oldp */
-  INTERNAL_SIZE_T  prevsize;  /* its size */
-
-  mchunkptr remainder;        /* holds split off extra space from newp */
-  INTERNAL_SIZE_T  remainder_size;   /* its size */
-
-  mchunkptr bck;              /* misc temp for linking */
-  mchunkptr fwd;              /* misc temp for linking */
-
-  check_inuse_chunk(ar_ptr, oldp);
-
-  if ((long)(oldsize) < (long)(nb))
-  {
-    Void_t* oldmem = BOUNDED_N(chunk2mem(oldp), oldsize);
-
-    /* Try expanding forward */
-
-    next = chunk_at_offset(oldp, oldsize);
-    if (next == top(ar_ptr) || !inuse(next))
-    {
-      nextsize = chunksize(next);
-
-      /* Forward into top only if a remainder */
-      if (next == top(ar_ptr))
-      {
-        if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE))
-        {
-          newsize += nextsize;
-          top(ar_ptr) = chunk_at_offset(oldp, nb);
-          set_head(top(ar_ptr), (newsize - nb) | PREV_INUSE);
-          set_head_size(oldp, nb);
-          return oldp;
-        }
-      }
-
-      /* Forward into next chunk */
-      else if (((long)(nextsize + newsize) >= (long)(nb)))
-      {
-        unlink(next, bck, fwd);
-        newsize  += nextsize;
-        goto split;
-      }
-    }
-    else
-    {
-      next = 0;
-      nextsize = 0;
-    }
-
-    oldsize -= SIZE_SZ;
-
-    /* Try shifting backwards. */
-
-    if (!prev_inuse(oldp))
-    {
-      prev = prev_chunk(oldp);
-      prevsize = chunksize(prev);
-
-      /* try forward + backward first to save a later consolidation */
-
-      if (next != 0)
-      {
-        /* into top */
-        if (next == top(ar_ptr))
-        {
-          if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE))
-          {
-            unlink(prev, bck, fwd);
-            newp = prev;
-            newsize += prevsize + nextsize;
-            MALLOC_COPY(BOUNDED_N(chunk2mem(newp), oldsize), oldmem, oldsize,
-                        1);
-            top(ar_ptr) = chunk_at_offset(newp, nb);
-            set_head(top(ar_ptr), (newsize - nb) | PREV_INUSE);
-            set_head_size(newp, nb);
-            return newp;
-          }
-        }
-
-        /* into next chunk */
-        else if (((long)(nextsize + prevsize + newsize) >= (long)(nb)))
-        {
-          unlink(next, bck, fwd);
-          unlink(prev, bck, fwd);
-          newp = prev;
-          newsize += nextsize + prevsize;
-          MALLOC_COPY(BOUNDED_N(chunk2mem(newp), oldsize), oldmem, oldsize, 1);
-          goto split;
-        }
-      }
-
-      /* backward only */
-      if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)
-      {
-        unlink(prev, bck, fwd);
-        newp = prev;
-        newsize += prevsize;
-        MALLOC_COPY(BOUNDED_N(chunk2mem(newp), oldsize), oldmem, oldsize, 1);
-        goto split;
-      }
-    }
-
-    /* Must allocate */
-
-    newp = chunk_alloc (ar_ptr, nb);
-
-    if (newp == 0) {
-      /* Maybe the failure is due to running out of mmapped areas. */
-      if (ar_ptr != &main_arena) {
-        (void)mutex_lock(&main_arena.mutex);
-        newp = chunk_alloc(&main_arena, nb);
-        (void)mutex_unlock(&main_arena.mutex);
-      } else {
-#if USE_ARENAS
-        /* ... or sbrk() has failed and there is still a chance to mmap() */
-        arena* ar_ptr2 = arena_get2(ar_ptr->next ? ar_ptr : 0, nb);
-        if(ar_ptr2) {
-          newp = chunk_alloc(ar_ptr2, nb);
-          (void)mutex_unlock(&ar_ptr2->mutex);
-        }
-#endif
-      }
-      if (newp == 0) /* propagate failure */
-        return 0;
-    }
-
-    /* Avoid copy if newp is next chunk after oldp. */
-    /* (This can only happen when new chunk is sbrk'ed.) */
-
-    if ( newp == next_chunk(oldp))
-    {
-      newsize += chunksize(newp);
-      newp = oldp;
-      goto split;
-    }
-
-    /* Otherwise copy, free, and exit */
-    MALLOC_COPY(BOUNDED_N(chunk2mem(newp), oldsize), oldmem, oldsize, 0);
-    chunk_free(ar_ptr, oldp);
-    return newp;
-  }
-
-
- split:  /* split off extra room in old or expanded chunk */
-
-  if (newsize - nb >= MINSIZE) /* split off remainder */
-  {
-    remainder = chunk_at_offset(newp, nb);
-    remainder_size = newsize - nb;
-    set_head_size(newp, nb);
-    set_head(remainder, remainder_size | PREV_INUSE);
-    set_inuse_bit_at_offset(remainder, remainder_size);
-    chunk_free(ar_ptr, remainder);
-  }
-  else
-  {
-    set_head_size(newp, newsize);
-    set_inuse_bit_at_offset(newp, newsize);
-  }
-
-  check_inuse_chunk(ar_ptr, newp);
-  return newp;
-}
-
-
-
-
-/*
-
-  memalign algorithm:
-
-    memalign requests more than enough space from malloc, finds a spot
-    within that chunk that meets the alignment request, and then
-    possibly frees the leading and trailing space.
-
-    The alignment argument must be a power of two. This property is not
-    checked by memalign, so misuse may result in random runtime errors.
-
-    8-byte alignment is guaranteed by normal malloc calls, so don't
-    bother calling memalign with an argument of 8 or less.
-
-    Overreliance on memalign is a sure way to fragment space.
-
-*/
-
-
-#if __STD_C
-Void_t* mEMALIGn(size_t alignment, size_t bytes)
-#else
-Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes;
-#endif
-{
-  arena *ar_ptr;
-  INTERNAL_SIZE_T    nb;      /* padded  request size */
-  mchunkptr p;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  __malloc_ptr_t (*hook) __MALLOC_PMT ((size_t, size_t,
-                                        __const __malloc_ptr_t)) =
-    __memalign_hook;
-  if (hook != NULL) {
-    Void_t* result;
-
-#if defined __GNUC__ && __GNUC__ >= 2
-    result = (*hook)(alignment, bytes, RETURN_ADDRESS (0));
-#else
-    result = (*hook)(alignment, bytes, NULL);
-#endif
-    return result;
-  }
-#endif
-
-  /* If need less alignment than we give anyway, just relay to malloc */
-
-  if (alignment <= MALLOC_ALIGNMENT) return mALLOc(bytes);
-
-  /* Otherwise, ensure that it is at least a minimum chunk size */
-
-  if (alignment <  MINSIZE) alignment = MINSIZE;
-
-  if(request2size(bytes, nb))
-    return 0;
-  arena_get(ar_ptr, nb + alignment + MINSIZE);
-  if(!ar_ptr)
-    return 0;
-  p = chunk_align(ar_ptr, nb, alignment);
-  (void)mutex_unlock(&ar_ptr->mutex);
-  if(!p) {
-    /* Maybe the failure is due to running out of mmapped areas. */
-    if(ar_ptr != &main_arena) {
-      (void)mutex_lock(&main_arena.mutex);
-      p = chunk_align(&main_arena, nb, alignment);
-      (void)mutex_unlock(&main_arena.mutex);
-    } else {
-#if USE_ARENAS
-      /* ... or sbrk() has failed and there is still a chance to mmap() */
-      ar_ptr = arena_get2(ar_ptr->next ? ar_ptr : 0, nb);
-      if(ar_ptr) {
-        p = chunk_align(ar_ptr, nb, alignment);
-        (void)mutex_unlock(&ar_ptr->mutex);
-      }
-#endif
-    }
-    if(!p) return 0;
-  }
-  return BOUNDED_N(chunk2mem(p), bytes);
-}
-
-static mchunkptr
-internal_function
-#if __STD_C
-chunk_align(arena* ar_ptr, INTERNAL_SIZE_T nb, size_t alignment)
-#else
-chunk_align(ar_ptr, nb, alignment)
-arena* ar_ptr; INTERNAL_SIZE_T nb; size_t alignment;
-#endif
-{
-  unsigned long m;            /* memory returned by malloc call */
-  mchunkptr p;                /* corresponding chunk */
-  char*     brk;              /* alignment point within p */
-  mchunkptr newp;             /* chunk to return */
-  INTERNAL_SIZE_T  newsize;   /* its size */
-  INTERNAL_SIZE_T  leadsize;  /* leading space befor alignment point */
-  mchunkptr remainder;        /* spare room at end to split off */
-  long      remainder_size;   /* its size */
-
-  /* Call chunk_alloc with worst case padding to hit alignment. */
-  p = chunk_alloc(ar_ptr, nb + alignment + MINSIZE);
-  if (p == 0)
-    return 0; /* propagate failure */
-
-  m = (unsigned long)chunk2mem(p);
-
-  if ((m % alignment) == 0) /* aligned */
-  {
-#if HAVE_MMAP
-    if(chunk_is_mmapped(p)) {
-      return p; /* nothing more to do */
-    }
-#endif
-  }
-  else /* misaligned */
-  {
-    /*
-      Find an aligned spot inside chunk.
-      Since we need to give back leading space in a chunk of at
-      least MINSIZE, if the first calculation places us at
-      a spot with less than MINSIZE leader, we can move to the
-      next aligned spot -- we've allocated enough total room so that
-      this is always possible.
-    */
-
-    brk = (char*)mem2chunk(((m + alignment - 1)) & -(long)alignment);
-    if ((long)(brk - (char*)(p)) < (long)MINSIZE) brk += alignment;
-
-    newp = chunk_at_offset(brk, 0);
-    leadsize = brk - (char*)(p);
-    newsize = chunksize(p) - leadsize;
-
-#if HAVE_MMAP
-    if(chunk_is_mmapped(p))
-    {
-      newp->prev_size = p->prev_size + leadsize;
-      set_head(newp, newsize|IS_MMAPPED);
-      return newp;
-    }
-#endif
-
-    /* give back leader, use the rest */
-
-    set_head(newp, newsize | PREV_INUSE);
-    set_inuse_bit_at_offset(newp, newsize);
-    set_head_size(p, leadsize);
-    chunk_free(ar_ptr, p);
-    p = newp;
-
-    assert (newsize>=nb && (((unsigned long)(chunk2mem(p))) % alignment) == 0);
-  }
-
-  /* Also give back spare room at the end */
-
-  remainder_size = chunksize(p) - nb;
-
-  if (remainder_size >= (long)MINSIZE)
-  {
-    remainder = chunk_at_offset(p, nb);
-    set_head(remainder, remainder_size | PREV_INUSE);
-    set_head_size(p, nb);
-    chunk_free(ar_ptr, remainder);
-  }
-
-  check_inuse_chunk(ar_ptr, p);
-  return p;
-}
-
-
-
-
-/*
-    valloc just invokes memalign with alignment argument equal
-    to the page size of the system (or as near to this as can
-    be figured out from all the includes/defines above.)
-*/
-
-#if __STD_C
-Void_t* vALLOc(size_t bytes)
-#else
-Void_t* vALLOc(bytes) size_t bytes;
-#endif
-{
-  if(__malloc_initialized < 0)
-    ptmalloc_init ();
-  return mEMALIGn (malloc_getpagesize, bytes);
-}
-
-/*
-  pvalloc just invokes valloc for the nearest pagesize
-  that will accommodate request
-*/
-
-
-#if __STD_C
-Void_t* pvALLOc(size_t bytes)
-#else
-Void_t* pvALLOc(bytes) size_t bytes;
-#endif
-{
-  size_t pagesize;
-  if(__malloc_initialized < 0)
-    ptmalloc_init ();
-  pagesize = malloc_getpagesize;
-  return mEMALIGn (pagesize, (bytes + pagesize - 1) & ~(pagesize - 1));
-}
-
-/*
-
-  calloc calls chunk_alloc, then zeroes out the allocated chunk.
-
-*/
-
-#if __STD_C
-Void_t* cALLOc(size_t n, size_t elem_size)
-#else
-Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size;
-#endif
-{
-  arena *ar_ptr;
-  mchunkptr p, oldtop;
-  INTERNAL_SIZE_T sz, csz, oldtopsize;
-  Void_t* mem;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  __malloc_ptr_t (*hook) __MALLOC_PMT ((size_t, __const __malloc_ptr_t)) =
-    __malloc_hook;
-  if (hook != NULL) {
-    sz = n * elem_size;
-#if defined __GNUC__ && __GNUC__ >= 2
-    mem = (*hook)(sz, RETURN_ADDRESS (0));
-#else
-    mem = (*hook)(sz, NULL);
-#endif
-    if(mem == 0)
-      return 0;
-#ifdef HAVE_MEMSET
-    return memset(mem, 0, sz);
-#else
-    while(sz > 0) ((char*)mem)[--sz] = 0; /* rather inefficient */
-    return mem;
-#endif
-  }
-#endif
-
-  if(request2size(n * elem_size, sz))
-    return 0;
-  arena_get(ar_ptr, sz);
-  if(!ar_ptr)
-    return 0;
-
-  /* Check if expand_top called, in which case there may be
-     no need to clear. */
-#if MORECORE_CLEARS
-  oldtop = top(ar_ptr);
-  oldtopsize = chunksize(top(ar_ptr));
-#if MORECORE_CLEARS < 2
-  /* Only newly allocated memory is guaranteed to be cleared.  */
-  if (ar_ptr == &main_arena &&
-      oldtopsize < sbrk_base + max_sbrked_mem - (char *)oldtop)
-    oldtopsize = (sbrk_base + max_sbrked_mem - (char *)oldtop);
-#endif
-#endif
-  p = chunk_alloc (ar_ptr, sz);
-
-  /* Only clearing follows, so we can unlock early. */
-  (void)mutex_unlock(&ar_ptr->mutex);
-
-  if (p == 0) {
-    /* Maybe the failure is due to running out of mmapped areas. */
-    if(ar_ptr != &main_arena) {
-      (void)mutex_lock(&main_arena.mutex);
-      p = chunk_alloc(&main_arena, sz);
-      (void)mutex_unlock(&main_arena.mutex);
-    } else {
-#if USE_ARENAS
-      /* ... or sbrk() has failed and there is still a chance to mmap() */
-      (void)mutex_lock(&main_arena.mutex);
-      ar_ptr = arena_get2(ar_ptr->next ? ar_ptr : 0, sz);
-      (void)mutex_unlock(&main_arena.mutex);
-      if(ar_ptr) {
-        p = chunk_alloc(ar_ptr, sz);
-        (void)mutex_unlock(&ar_ptr->mutex);
-      }
-#endif
-    }
-    if (p == 0) return 0;
-  }
-  mem = BOUNDED_N(chunk2mem(p), n * elem_size);
-
-  /* Two optional cases in which clearing not necessary */
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(p)) return mem;
-#endif
-
-  csz = chunksize(p);
-
-#if MORECORE_CLEARS
-  if (p == oldtop && csz > oldtopsize) {
-    /* clear only the bytes from non-freshly-sbrked memory */
-    csz = oldtopsize;
-  }
-#endif
-
-  csz -= SIZE_SZ;
-  MALLOC_ZERO(BOUNDED_N(chunk2mem(p), csz), csz);
-  return mem;
-}
-
-/*
-
-  cfree just calls free. It is needed/defined on some systems
-  that pair it with calloc, presumably for odd historical reasons.
-
-*/
-
-#if !defined(_LIBC)
-#if __STD_C
-void cfree(Void_t *mem)
-#else
-void cfree(mem) Void_t *mem;
-#endif
-{
-  fREe(mem);
-}
-#endif
-
-
-
-/*
-
-    Malloc_trim gives memory back to the system (via negative
-    arguments to sbrk) if there is unused memory at the `high' end of
-    the malloc pool. You can call this after freeing large blocks of
-    memory to potentially reduce the system-level memory requirements
-    of a program. However, it cannot guarantee to reduce memory. Under
-    some allocation patterns, some large free blocks of memory will be
-    locked between two used chunks, so they cannot be given back to
-    the system.
-
-    The `pad' argument to malloc_trim represents the amount of free
-    trailing space to leave untrimmed. If this argument is zero,
-    only the minimum amount of memory to maintain internal data
-    structures will be left (one page or less). Non-zero arguments
-    can be supplied to maintain enough trailing space to service
-    future expected allocations without having to re-obtain memory
-    from the system.
-
-    Malloc_trim returns 1 if it actually released any memory, else 0.
-
-*/
-
-#if __STD_C
-int mALLOC_TRIm(size_t pad)
-#else
-int mALLOC_TRIm(pad) size_t pad;
-#endif
-{
-  int res;
-
-  (void)mutex_lock(&main_arena.mutex);
-  res = main_trim(pad);
-  (void)mutex_unlock(&main_arena.mutex);
-  return res;
-}
-
-/* Trim the main arena. */
-
-static int
-internal_function
-#if __STD_C
-main_trim(size_t pad)
-#else
-main_trim(pad) size_t pad;
-#endif
-{
-  mchunkptr top_chunk;   /* The current top chunk */
-  long  top_size;        /* Amount of top-most memory */
-  long  extra;           /* Amount to release */
-  char* current_brk;     /* address returned by pre-check sbrk call */
-  char* new_brk;         /* address returned by negative sbrk call */
-
-  unsigned long pagesz = malloc_getpagesize;
-
-  top_chunk = top(&main_arena);
-  top_size = chunksize(top_chunk);
-  extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz;
-
-  if (extra < (long)pagesz) /* Not enough memory to release */
-    return 0;
-
-  /* Test to make sure no one else called sbrk */
-  current_brk = (char*)(MORECORE (0));
-  if (current_brk != (char*)(top_chunk) + top_size)
-    return 0;     /* Apparently we don't own memory; must fail */
-
-  new_brk = (char*)(MORECORE (-extra));
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  /* Call the `morecore' hook if necessary.  */
-  if (__after_morecore_hook)
-    (*__after_morecore_hook) ();
-#endif
-
-  if (new_brk == (char*)(MORECORE_FAILURE)) { /* sbrk failed? */
-    /* Try to figure out what we have */
-    current_brk = (char*)(MORECORE (0));
-    top_size = current_brk - (char*)top_chunk;
-    if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */
-    {
-      sbrked_mem = current_brk - sbrk_base;
-      set_head(top_chunk, top_size | PREV_INUSE);
-    }
-    check_chunk(&main_arena, top_chunk);
-    return 0;
-  }
-  sbrked_mem -= extra;
-
-  /* Success. Adjust top accordingly. */
-  set_head(top_chunk, (top_size - extra) | PREV_INUSE);
-  check_chunk(&main_arena, top_chunk);
-  return 1;
-}
-
-#if USE_ARENAS
-
-static int
-internal_function
-#if __STD_C
-heap_trim(heap_info *heap, size_t pad)
-#else
-heap_trim(heap, pad) heap_info *heap; size_t pad;
-#endif
-{
-  unsigned long pagesz = malloc_getpagesize;
-  arena *ar_ptr = heap->ar_ptr;
-  mchunkptr top_chunk = top(ar_ptr), p, bck, fwd;
-  heap_info *prev_heap;
-  long new_size, top_size, extra;
-
-  /* Can this heap go away completely ? */
-  while(top_chunk == chunk_at_offset(heap, sizeof(*heap))) {
-    prev_heap = heap->prev;
-    p = chunk_at_offset(prev_heap, prev_heap->size - (MINSIZE-2*SIZE_SZ));
-    assert(p->size == (0|PREV_INUSE)); /* must be fencepost */
-    p = prev_chunk(p);
-    new_size = chunksize(p) + (MINSIZE-2*SIZE_SZ);
-    assert(new_size>0 && new_size<(long)(2*MINSIZE));
-    if(!prev_inuse(p))
-      new_size += p->prev_size;
-    assert(new_size>0 && new_size<HEAP_MAX_SIZE);
-    if(new_size + (HEAP_MAX_SIZE - prev_heap->size) < pad + MINSIZE + pagesz)
-      break;
-    ar_ptr->size -= heap->size;
-    arena_mem -= heap->size;
-    delete_heap(heap);
-    heap = prev_heap;
-    if(!prev_inuse(p)) { /* consolidate backward */
-      p = prev_chunk(p);
-      unlink(p, bck, fwd);
-    }
-    assert(((unsigned long)((char*)p + new_size) & (pagesz-1)) == 0);
-    assert( ((char*)p + new_size) == ((char*)heap + heap->size) );
-    top(ar_ptr) = top_chunk = p;
-    set_head(top_chunk, new_size | PREV_INUSE);
-    check_chunk(ar_ptr, top_chunk);
-  }
-  top_size = chunksize(top_chunk);
-  extra = ((top_size - pad - MINSIZE + (pagesz-1))/pagesz - 1) * pagesz;
-  if(extra < (long)pagesz)
-    return 0;
-  /* Try to shrink. */
-  if(grow_heap(heap, -extra) != 0)
-    return 0;
-  ar_ptr->size -= extra;
-  arena_mem -= extra;
-
-  /* Success. Adjust top accordingly. */
-  set_head(top_chunk, (top_size - extra) | PREV_INUSE);
-  check_chunk(ar_ptr, top_chunk);
-  return 1;
-}
-
-#endif /* USE_ARENAS */
-
-
-
-/*
-  malloc_usable_size:
-
-    This routine tells you how many bytes you can actually use in an
-    allocated chunk, which may be more than you requested (although
-    often not). You can use this many bytes without worrying about
-    overwriting other allocated objects. Not a particularly great
-    programming practice, but still sometimes useful.
-
-*/
-
-#if __STD_C
-size_t mALLOC_USABLE_SIZe(Void_t* mem)
-#else
-size_t mALLOC_USABLE_SIZe(mem) Void_t* mem;
-#endif
-{
-  mchunkptr p;
-
-  if (mem == 0)
-    return 0;
-  else
-  {
-    p = mem2chunk(mem);
-    if(!chunk_is_mmapped(p))
-    {
-      if (!inuse(p)) return 0;
-      check_inuse_chunk(arena_for_ptr(mem), p);
-      return chunksize(p) - SIZE_SZ;
-    }
-    return chunksize(p) - 2*SIZE_SZ;
-  }
-}
-
-
-
-
-/* Utility to update mallinfo for malloc_stats() and mallinfo() */
-
-static void
-#if __STD_C
-malloc_update_mallinfo(arena *ar_ptr, struct mallinfo *mi)
-#else
-malloc_update_mallinfo(ar_ptr, mi) arena *ar_ptr; struct mallinfo *mi;
-#endif
-{
-  int i, navail;
-  mbinptr b;
-  mchunkptr p;
-#if MALLOC_DEBUG
-  mchunkptr q;
-#endif
-  INTERNAL_SIZE_T avail;
-
-  (void)mutex_lock(&ar_ptr->mutex);
-  avail = chunksize(top(ar_ptr));
-  navail = ((long)(avail) >= (long)MINSIZE)? 1 : 0;
-
-  for (i = 1; i < NAV; ++i)
-  {
-    b = bin_at(ar_ptr, i);
-    for (p = last(b); p != b; p = p->bk)
-    {
-#if MALLOC_DEBUG
-      check_free_chunk(ar_ptr, p);
-      for (q = next_chunk(p);
-           q != top(ar_ptr) && inuse(q) && (long)chunksize(q) > 0;
-           q = next_chunk(q))
-        check_inuse_chunk(ar_ptr, q);
-#endif
-      avail += chunksize(p);
-      navail++;
-    }
-  }
-
-  mi->arena = ar_ptr->size;
-  mi->ordblks = navail;
-  mi->smblks = mi->usmblks = mi->fsmblks = 0; /* clear unused fields */
-  mi->uordblks = ar_ptr->size - avail;
-  mi->fordblks = avail;
-  mi->hblks = n_mmaps;
-  mi->hblkhd = mmapped_mem;
-  mi->keepcost = chunksize(top(ar_ptr));
-
-  (void)mutex_unlock(&ar_ptr->mutex);
-}
-
-#if USE_ARENAS && MALLOC_DEBUG > 1
-
-/* Print the complete contents of a single heap to stderr. */
-
-static void
-#if __STD_C
-dump_heap(heap_info *heap)
-#else
-dump_heap(heap) heap_info *heap;
-#endif
-{
-  char *ptr;
-  mchunkptr p;
-
-  fprintf(stderr, "Heap %p, size %10lx:\n", heap, (long)heap->size);
-  ptr = (heap->ar_ptr != (arena*)(heap+1)) ?
-    (char*)(heap + 1) : (char*)(heap + 1) + sizeof(arena);
-  p = (mchunkptr)(((unsigned long)ptr + MALLOC_ALIGN_MASK) &
-                  ~MALLOC_ALIGN_MASK);
-  for(;;) {
-    fprintf(stderr, "chunk %p size %10lx", p, (long)p->size);
-    if(p == top(heap->ar_ptr)) {
-      fprintf(stderr, " (top)\n");
-      break;
-    } else if(p->size == (0|PREV_INUSE)) {
-      fprintf(stderr, " (fence)\n");
-      break;
-    }
-    fprintf(stderr, "\n");
-    p = next_chunk(p);
-  }
-}
-
-#endif
-
-
-
-/*
-
-  malloc_stats:
-
-    For all arenas separately and in total, prints on stderr the
-    amount of space obtained from the system, and the current number
-    of bytes allocated via malloc (or realloc, etc) but not yet
-    freed. (Note that this is the number of bytes allocated, not the
-    number requested. It will be larger than the number requested
-    because of alignment and bookkeeping overhead.)  When not compiled
-    for multiple threads, the maximum amount of allocated memory
-    (which may be more than current if malloc_trim and/or munmap got
-    called) is also reported.  When using mmap(), prints the maximum
-    number of simultaneous mmap regions used, too.
-
-*/
-
-void mALLOC_STATs()
-{
-  int i;
-  arena *ar_ptr;
-  struct mallinfo mi;
-  unsigned int in_use_b = mmapped_mem, system_b = in_use_b;
-#if THREAD_STATS
-  long stat_lock_direct = 0, stat_lock_loop = 0, stat_lock_wait = 0;
-#endif
-
-  for(i=0, ar_ptr = &main_arena;; i++) {
-    malloc_update_mallinfo(ar_ptr, &mi);
-    fprintf(stderr, "Arena %d:\n", i);
-    fprintf(stderr, "system bytes     = %10u\n", (unsigned int)mi.arena);
-    fprintf(stderr, "in use bytes     = %10u\n", (unsigned int)mi.uordblks);
-    system_b += mi.arena;
-    in_use_b += mi.uordblks;
-#if THREAD_STATS
-    stat_lock_direct += ar_ptr->stat_lock_direct;
-    stat_lock_loop += ar_ptr->stat_lock_loop;
-    stat_lock_wait += ar_ptr->stat_lock_wait;
-#endif
-#if USE_ARENAS && MALLOC_DEBUG > 1
-    if(ar_ptr != &main_arena) {
-      heap_info *heap;
-      (void)mutex_lock(&ar_ptr->mutex);
-      heap = heap_for_ptr(top(ar_ptr));
-      while(heap) { dump_heap(heap); heap = heap->prev; }
-      (void)mutex_unlock(&ar_ptr->mutex);
-    }
-#endif
-    ar_ptr = ar_ptr->next;
-    if(ar_ptr == &main_arena) break;
-  }
-#if HAVE_MMAP
-  fprintf(stderr, "Total (incl. mmap):\n");
-#else
-  fprintf(stderr, "Total:\n");
-#endif
-  fprintf(stderr, "system bytes     = %10u\n", system_b);
-  fprintf(stderr, "in use bytes     = %10u\n", in_use_b);
-#ifdef NO_THREADS
-  fprintf(stderr, "max system bytes = %10u\n", (unsigned int)max_total_mem);
-#endif
-#if HAVE_MMAP
-  fprintf(stderr, "max mmap regions = %10u\n", (unsigned int)max_n_mmaps);
-  fprintf(stderr, "max mmap bytes   = %10lu\n", max_mmapped_mem);
-#endif
-#if THREAD_STATS
-  fprintf(stderr, "heaps created    = %10d\n",  stat_n_heaps);
-  fprintf(stderr, "locked directly  = %10ld\n", stat_lock_direct);
-  fprintf(stderr, "locked in loop   = %10ld\n", stat_lock_loop);
-  fprintf(stderr, "locked waiting   = %10ld\n", stat_lock_wait);
-  fprintf(stderr, "locked total     = %10ld\n",
-          stat_lock_direct + stat_lock_loop + stat_lock_wait);
-#endif
-}
-
-/*
-  mallinfo returns a copy of updated current mallinfo.
-  The information reported is for the arena last used by the thread.
-*/
-
-struct mallinfo mALLINFo()
-{
-  struct mallinfo mi;
-  Void_t *vptr = NULL;
-
-#ifndef NO_THREADS
-  tsd_getspecific(arena_key, vptr);
-  if(vptr == ATFORK_ARENA_PTR)
-    vptr = (Void_t*)&main_arena;
-#endif
-  malloc_update_mallinfo((vptr ? (arena*)vptr : &main_arena), &mi);
-  return mi;
-}
-
-
-
-
-/*
-  mallopt:
-
-    mallopt is the general SVID/XPG interface to tunable parameters.
-    The format is to provide a (parameter-number, parameter-value) pair.
-    mallopt then sets the corresponding parameter to the argument
-    value if it can (i.e., so long as the value is meaningful),
-    and returns 1 if successful else 0.
-
-    See descriptions of tunable parameters above.
-
-*/
-
-#if __STD_C
-int mALLOPt(int param_number, int value)
-#else
-int mALLOPt(param_number, value) int param_number; int value;
-#endif
-{
-  switch(param_number)
-  {
-    case M_TRIM_THRESHOLD:
-      trim_threshold = value; return 1;
-    case M_TOP_PAD:
-      top_pad = value; return 1;
-    case M_MMAP_THRESHOLD:
-#if USE_ARENAS
-      /* Forbid setting the threshold too high. */
-      if((unsigned long)value > HEAP_MAX_SIZE/2) return 0;
-#endif
-      mmap_threshold = value; return 1;
-    case M_MMAP_MAX:
-#if HAVE_MMAP
-      n_mmaps_max = value; return 1;
-#else
-      if (value != 0) return 0; else  n_mmaps_max = value; return 1;
-#endif
-    case M_CHECK_ACTION:
-      check_action = value; return 1;
-
-    default:
-      return 0;
-  }
-}
-
-
-
-/* Get/set state: malloc_get_state() records the current state of all
-   malloc variables (_except_ for the actual heap contents and `hook'
-   function pointers) in a system dependent, opaque data structure.
-   This data structure is dynamically allocated and can be free()d
-   after use.  malloc_set_state() restores the state of all malloc
-   variables to the previously obtained state.  This is especially
-   useful when using this malloc as part of a shared library, and when
-   the heap contents are saved/restored via some other method.  The
-   primary example for this is GNU Emacs with its `dumping' procedure.
-   `Hook' function pointers are never saved or restored by these
-   functions, with two exceptions: If malloc checking was in use when
-   malloc_get_state() was called, then malloc_set_state() calls
-   __malloc_check_init() if possible; if malloc checking was not in
-   use in the recorded state but the user requested malloc checking,
-   then the hooks are reset to 0.  */
-
-#define MALLOC_STATE_MAGIC   0x444c4541l
-#define MALLOC_STATE_VERSION (0*0x100l + 1l) /* major*0x100 + minor */
-
-struct malloc_state {
-  long          magic;
-  long          version;
-  mbinptr       av[NAV * 2 + 2];
-  char*         sbrk_base;
-  int           sbrked_mem_bytes;
-  unsigned long trim_threshold;
-  unsigned long top_pad;
-  unsigned int  n_mmaps_max;
-  unsigned long mmap_threshold;
-  int           check_action;
-  unsigned long max_sbrked_mem;
-  unsigned long max_total_mem;
-  unsigned int  n_mmaps;
-  unsigned int  max_n_mmaps;
-  unsigned long mmapped_mem;
-  unsigned long max_mmapped_mem;
-  int           using_malloc_checking;
-};
-
-Void_t*
-mALLOC_GET_STATe()
-{
-  struct malloc_state* ms;
-  int i;
-  mbinptr b;
-
-  ms = (struct malloc_state*)mALLOc(sizeof(*ms));
-  if (!ms)
-    return 0;
-  (void)mutex_lock(&main_arena.mutex);
-  ms->magic = MALLOC_STATE_MAGIC;
-  ms->version = MALLOC_STATE_VERSION;
-  ms->av[0] = main_arena.av[0];
-  ms->av[1] = main_arena.av[1];
-  for(i=0; i<NAV; i++) {
-    b = bin_at(&main_arena, i);
-    if(first(b) == b)
-      ms->av[2*i+2] = ms->av[2*i+3] = 0; /* empty bin (or initial top) */
-    else {
-      ms->av[2*i+2] = first(b);
-      ms->av[2*i+3] = last(b);
-    }
-  }
-  ms->sbrk_base = sbrk_base;
-  ms->sbrked_mem_bytes = sbrked_mem;
-  ms->trim_threshold = trim_threshold;
-  ms->top_pad = top_pad;
-  ms->n_mmaps_max = n_mmaps_max;
-  ms->mmap_threshold = mmap_threshold;
-  ms->check_action = check_action;
-  ms->max_sbrked_mem = max_sbrked_mem;
-#ifdef NO_THREADS
-  ms->max_total_mem = max_total_mem;
-#else
-  ms->max_total_mem = 0;
-#endif
-  ms->n_mmaps = n_mmaps;
-  ms->max_n_mmaps = max_n_mmaps;
-  ms->mmapped_mem = mmapped_mem;
-  ms->max_mmapped_mem = max_mmapped_mem;
-#if defined _LIBC || defined MALLOC_HOOKS
-  ms->using_malloc_checking = using_malloc_checking;
-#else
-  ms->using_malloc_checking = 0;
-#endif
-  (void)mutex_unlock(&main_arena.mutex);
-  return (Void_t*)ms;
-}
-
-int
-#if __STD_C
-mALLOC_SET_STATe(Void_t* msptr)
-#else
-mALLOC_SET_STATe(msptr) Void_t* msptr;
-#endif
-{
-  struct malloc_state* ms = (struct malloc_state*)msptr;
-  int i;
-  mbinptr b;
-
-#if defined _LIBC || defined MALLOC_HOOKS
-  disallow_malloc_check = 1;
-#endif
-  ptmalloc_init();
-  if(ms->magic != MALLOC_STATE_MAGIC) return -1;
-  /* Must fail if the major version is too high. */
-  if((ms->version & ~0xffl) > (MALLOC_STATE_VERSION & ~0xffl)) return -2;
-  (void)mutex_lock(&main_arena.mutex);
-  main_arena.av[0] = ms->av[0];
-  main_arena.av[1] = ms->av[1];
-  for(i=0; i<NAV; i++) {
-    b = bin_at(&main_arena, i);
-    if(ms->av[2*i+2] == 0)
-      first(b) = last(b) = b;
-    else {
-      first(b) = ms->av[2*i+2];
-      last(b) = ms->av[2*i+3];
-      if(i > 0) {
-        /* Make sure the links to the `av'-bins in the heap are correct. */
-        first(b)->bk = b;
-        last(b)->fd = b;
-      }
-    }
-  }
-  sbrk_base = ms->sbrk_base;
-  sbrked_mem = ms->sbrked_mem_bytes;
-  trim_threshold = ms->trim_threshold;
-  top_pad = ms->top_pad;
-  n_mmaps_max = ms->n_mmaps_max;
-  mmap_threshold = ms->mmap_threshold;
-  check_action = ms->check_action;
-  max_sbrked_mem = ms->max_sbrked_mem;
-#ifdef NO_THREADS
-  max_total_mem = ms->max_total_mem;
-#endif
-  n_mmaps = ms->n_mmaps;
-  max_n_mmaps = ms->max_n_mmaps;
-  mmapped_mem = ms->mmapped_mem;
-  max_mmapped_mem = ms->max_mmapped_mem;
-  /* add version-dependent code here */
-  if (ms->version >= 1) {
-#if defined _LIBC || defined MALLOC_HOOKS
-    /* Check whether it is safe to enable malloc checking, or whether
-       it is necessary to disable it.  */
-    if (ms->using_malloc_checking && !using_malloc_checking &&
-        !disallow_malloc_check)
-      __malloc_check_init ();
-    else if (!ms->using_malloc_checking && using_malloc_checking) {
-      __malloc_hook = 0;
-      __free_hook = 0;
-      __realloc_hook = 0;
-      __memalign_hook = 0;
-      using_malloc_checking = 0;
-    }
-#endif
-  }
-
-  (void)mutex_unlock(&main_arena.mutex);
-  return 0;
-}
-
-
-
-#if defined _LIBC || defined MALLOC_HOOKS
-
-/* A simple, standard set of debugging hooks.  Overhead is `only' one
-   byte per chunk; still this will catch most cases of double frees or
-   overruns.  The goal here is to avoid obscure crashes due to invalid
-   usage, unlike in the MALLOC_DEBUG code. */
-
-#define MAGICBYTE(p) ( ( ((size_t)p >> 3) ^ ((size_t)p >> 11)) & 0xFF )
-
-/* Instrument a chunk with overrun detector byte(s) and convert it
-   into a user pointer with requested size sz. */
-
-static Void_t*
-internal_function
-#if __STD_C
-chunk2mem_check(mchunkptr p, size_t sz)
-#else
-chunk2mem_check(p, sz) mchunkptr p; size_t sz;
-#endif
-{
-  unsigned char* m_ptr = (unsigned char*)BOUNDED_N(chunk2mem(p), sz);
-  size_t i;
-
-  for(i = chunksize(p) - (chunk_is_mmapped(p) ? 2*SIZE_SZ+1 : SIZE_SZ+1);
-      i > sz;
-      i -= 0xFF) {
-    if(i-sz < 0x100) {
-      m_ptr[i] = (unsigned char)(i-sz);
-      break;
-    }
-    m_ptr[i] = 0xFF;
-  }
-  m_ptr[sz] = MAGICBYTE(p);
-  return (Void_t*)m_ptr;
-}
-
-/* Convert a pointer to be free()d or realloc()ed to a valid chunk
-   pointer.  If the provided pointer is not valid, return NULL. */
-
-static mchunkptr
-internal_function
-#if __STD_C
-mem2chunk_check(Void_t* mem)
-#else
-mem2chunk_check(mem) Void_t* mem;
-#endif
-{
-  mchunkptr p;
-  INTERNAL_SIZE_T sz, c;
-  unsigned char magic;
-
-  p = mem2chunk(mem);
-  if(!aligned_OK(p)) return NULL;
-  if( (char*)p>=sbrk_base && (char*)p<(sbrk_base+sbrked_mem) ) {
-    /* Must be a chunk in conventional heap memory. */
-    if(chunk_is_mmapped(p) ||
-       ( (sz = chunksize(p)), ((char*)p + sz)>=(sbrk_base+sbrked_mem) ) ||
-       sz<MINSIZE || sz&MALLOC_ALIGN_MASK || !inuse(p) ||
-       ( !prev_inuse(p) && (p->prev_size&MALLOC_ALIGN_MASK ||
-                            (long)prev_chunk(p)<(long)sbrk_base ||
-                            next_chunk(prev_chunk(p))!=p) ))
-      return NULL;
-    magic = MAGICBYTE(p);
-    for(sz += SIZE_SZ-1; (c = ((unsigned char*)p)[sz]) != magic; sz -= c) {
-      if(c<=0 || sz<(c+2*SIZE_SZ)) return NULL;
-    }
-    ((unsigned char*)p)[sz] ^= 0xFF;
-  } else {
-    unsigned long offset, page_mask = malloc_getpagesize-1;
-
-    /* mmap()ed chunks have MALLOC_ALIGNMENT or higher power-of-two
-       alignment relative to the beginning of a page.  Check this
-       first. */
-    offset = (unsigned long)mem & page_mask;
-    if((offset!=MALLOC_ALIGNMENT && offset!=0 && offset!=0x10 &&
-        offset!=0x20 && offset!=0x40 && offset!=0x80 && offset!=0x100 &&
-        offset!=0x200 && offset!=0x400 && offset!=0x800 && offset!=0x1000 &&
-        offset<0x2000) ||
-       !chunk_is_mmapped(p) || (p->size & PREV_INUSE) ||
-       ( (((unsigned long)p - p->prev_size) & page_mask) != 0 ) ||
-       ( (sz = chunksize(p)), ((p->prev_size + sz) & page_mask) != 0 ) )
-      return NULL;
-    magic = MAGICBYTE(p);
-    for(sz -= 1; (c = ((unsigned char*)p)[sz]) != magic; sz -= c) {
-      if(c<=0 || sz<(c+2*SIZE_SZ)) return NULL;
-    }
-    ((unsigned char*)p)[sz] ^= 0xFF;
-  }
-  return p;
-}
-
-/* Check for corruption of the top chunk, and try to recover if
-   necessary. */
-
-static int
-internal_function
-#if __STD_C
-top_check(void)
-#else
-top_check()
-#endif
-{
-  mchunkptr t = top(&main_arena);
-  char* brk, * new_brk;
-  INTERNAL_SIZE_T front_misalign, sbrk_size;
-  unsigned long pagesz = malloc_getpagesize;
-
-  if((char*)t + chunksize(t) == sbrk_base + sbrked_mem ||
-     t == initial_top(&main_arena)) return 0;
-
-  if(check_action & 1)
-    fprintf(stderr, "malloc: top chunk is corrupt\n");
-  if(check_action & 2)
-    abort();
-
-  /* Try to set up a new top chunk. */
-  brk = MORECORE(0);
-  front_misalign = (unsigned long)chunk2mem(brk) & MALLOC_ALIGN_MASK;
-  if (front_misalign > 0)
-    front_misalign = MALLOC_ALIGNMENT - front_misalign;
-  sbrk_size = front_misalign + top_pad + MINSIZE;
-  sbrk_size += pagesz - ((unsigned long)(brk + sbrk_size) & (pagesz - 1));
-  new_brk = (char*)(MORECORE (sbrk_size));
-  if (new_brk == (char*)(MORECORE_FAILURE)) return -1;
-  sbrked_mem = (new_brk - sbrk_base) + sbrk_size;
-
-  top(&main_arena) = (mchunkptr)(brk + front_misalign);
-  set_head(top(&main_arena), (sbrk_size - front_misalign) | PREV_INUSE);
-
-  return 0;
-}
-
-static Void_t*
-#if __STD_C
-malloc_check(size_t sz, const Void_t *caller)
-#else
-malloc_check(sz, caller) size_t sz; const Void_t *caller;
-#endif
-{
-  mchunkptr victim;
-  INTERNAL_SIZE_T nb;
-
-  if(request2size(sz+1, nb))
-    return 0;
-  (void)mutex_lock(&main_arena.mutex);
-  victim = (top_check() >= 0) ? chunk_alloc(&main_arena, nb) : NULL;
-  (void)mutex_unlock(&main_arena.mutex);
-  if(!victim) return NULL;
-  return chunk2mem_check(victim, sz);
-}
-
-static void
-#if __STD_C
-free_check(Void_t* mem, const Void_t *caller)
-#else
-free_check(mem, caller) Void_t* mem; const Void_t *caller;
-#endif
-{
-  mchunkptr p;
-
-  if(!mem) return;
-  (void)mutex_lock(&main_arena.mutex);
-  p = mem2chunk_check(mem);
-  if(!p) {
-    (void)mutex_unlock(&main_arena.mutex);
-    if(check_action & 1)
-      fprintf(stderr, "free(): invalid pointer %p!\n", mem);
-    if(check_action & 2)
-      abort();
-    return;
-  }
-#if HAVE_MMAP
-  if (chunk_is_mmapped(p)) {
-    (void)mutex_unlock(&main_arena.mutex);
-    munmap_chunk(p);
-    return;
-  }
-#endif
-#if 0 /* Erase freed memory. */
-  memset(mem, 0, chunksize(p) - (SIZE_SZ+1));
-#endif
-  chunk_free(&main_arena, p);
-  (void)mutex_unlock(&main_arena.mutex);
-}
-
-static Void_t*
-#if __STD_C
-realloc_check(Void_t* oldmem, size_t bytes, const Void_t *caller)
-#else
-realloc_check(oldmem, bytes, caller)
-     Void_t* oldmem; size_t bytes; const Void_t *caller;
-#endif
-{
-  mchunkptr oldp, newp;
-  INTERNAL_SIZE_T nb, oldsize;
-
-  if (oldmem == 0) return malloc_check(bytes, NULL);
-  (void)mutex_lock(&main_arena.mutex);
-  oldp = mem2chunk_check(oldmem);
-  if(!oldp) {
-    (void)mutex_unlock(&main_arena.mutex);
-    if(check_action & 1)
-      fprintf(stderr, "realloc(): invalid pointer %p!\n", oldmem);
-    if(check_action & 2)
-      abort();
-    return malloc_check(bytes, NULL);
-  }
-  oldsize = chunksize(oldp);
-
-  if(request2size(bytes+1, nb)) {
-    (void)mutex_unlock(&main_arena.mutex);
-    return 0;
-  }
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(oldp)) {
-#if HAVE_MREMAP
-    newp = mremap_chunk(oldp, nb);
-    if(!newp) {
-#endif
-      /* Note the extra SIZE_SZ overhead. */
-      if(oldsize - SIZE_SZ >= nb) newp = oldp; /* do nothing */
-      else {
-        /* Must alloc, copy, free. */
-        newp = (top_check() >= 0) ? chunk_alloc(&main_arena, nb) : NULL;
-        if (newp) {
-          MALLOC_COPY(BOUNDED_N(chunk2mem(newp), nb),
-		      oldmem, oldsize - 2*SIZE_SZ, 0);
-          munmap_chunk(oldp);
-        }
-      }
-#if HAVE_MREMAP
-    }
-#endif
-  } else {
-#endif /* HAVE_MMAP */
-    newp = (top_check() >= 0) ?
-      chunk_realloc(&main_arena, oldp, oldsize, nb) : NULL;
-#if 0 /* Erase freed memory. */
-    nb = chunksize(newp);
-    if(oldp<newp || oldp>=chunk_at_offset(newp, nb)) {
-      memset((char*)oldmem + 2*sizeof(mbinptr), 0,
-             oldsize - (2*sizeof(mbinptr)+2*SIZE_SZ+1));
-    } else if(nb > oldsize+SIZE_SZ) {
-      memset((char*)BOUNDED_N(chunk2mem(newp), bytes) + oldsize,
-	     0, nb - (oldsize+SIZE_SZ));
-    }
-#endif
-#if HAVE_MMAP
-  }
-#endif
-  (void)mutex_unlock(&main_arena.mutex);
-
-  if(!newp) return NULL;
-  return chunk2mem_check(newp, bytes);
-}
-
-static Void_t*
-#if __STD_C
-memalign_check(size_t alignment, size_t bytes, const Void_t *caller)
-#else
-memalign_check(alignment, bytes, caller)
-     size_t alignment; size_t bytes; const Void_t *caller;
-#endif
-{
-  INTERNAL_SIZE_T nb;
-  mchunkptr p;
-
-  if (alignment <= MALLOC_ALIGNMENT) return malloc_check(bytes, NULL);
-  if (alignment <  MINSIZE) alignment = MINSIZE;
-
-  if(request2size(bytes+1, nb))
-    return 0;
-  (void)mutex_lock(&main_arena.mutex);
-  p = (top_check() >= 0) ? chunk_align(&main_arena, nb, alignment) : NULL;
-  (void)mutex_unlock(&main_arena.mutex);
-  if(!p) return NULL;
-  return chunk2mem_check(p, bytes);
-}
-
-#ifndef NO_THREADS
-
-/* The following hooks are used when the global initialization in
-   ptmalloc_init() hasn't completed yet. */
-
-static Void_t*
-#if __STD_C
-malloc_starter(size_t sz, const Void_t *caller)
-#else
-malloc_starter(sz, caller) size_t sz; const Void_t *caller;
-#endif
-{
-  INTERNAL_SIZE_T nb;
-  mchunkptr victim;
-
-  if(request2size(sz, nb))
-    return 0;
-  victim = chunk_alloc(&main_arena, nb);
-
-  return victim ? BOUNDED_N(chunk2mem(victim), sz) : 0;
-}
-
-static void
-#if __STD_C
-free_starter(Void_t* mem, const Void_t *caller)
-#else
-free_starter(mem, caller) Void_t* mem; const Void_t *caller;
-#endif
-{
-  mchunkptr p;
-
-  if(!mem) return;
-  p = mem2chunk(mem);
-#if HAVE_MMAP
-  if (chunk_is_mmapped(p)) {
-    munmap_chunk(p);
-    return;
-  }
-#endif
-  chunk_free(&main_arena, p);
-}
-
-/* The following hooks are used while the `atfork' handling mechanism
-   is active. */
-
-static Void_t*
-#if __STD_C
-malloc_atfork (size_t sz, const Void_t *caller)
-#else
-malloc_atfork(sz, caller) size_t sz; const Void_t *caller;
-#endif
-{
-  Void_t *vptr = NULL;
-  INTERNAL_SIZE_T nb;
-  mchunkptr victim;
-
-  tsd_getspecific(arena_key, vptr);
-  if(vptr == ATFORK_ARENA_PTR) {
-    /* We are the only thread that may allocate at all.  */
-    if(save_malloc_hook != malloc_check) {
-      if(request2size(sz, nb))
-        return 0;
-      victim = chunk_alloc(&main_arena, nb);
-      return victim ? BOUNDED_N(chunk2mem(victim), sz) : 0;
-    } else {
-      if(top_check()<0 || request2size(sz+1, nb))
-        return 0;
-      victim = chunk_alloc(&main_arena, nb);
-      return victim ? chunk2mem_check(victim, sz) : 0;
-    }
-  } else {
-    /* Suspend the thread until the `atfork' handlers have completed.
-       By that time, the hooks will have been reset as well, so that
-       mALLOc() can be used again. */
-    (void)mutex_lock(&list_lock);
-    (void)mutex_unlock(&list_lock);
-    return mALLOc(sz);
-  }
-}
-
-static void
-#if __STD_C
-free_atfork(Void_t* mem, const Void_t *caller)
-#else
-free_atfork(mem, caller) Void_t* mem; const Void_t *caller;
-#endif
-{
-  Void_t *vptr = NULL;
-  arena *ar_ptr;
-  mchunkptr p;                          /* chunk corresponding to mem */
-
-  if (mem == 0)                              /* free(0) has no effect */
-    return;
-
-  p = mem2chunk(mem);         /* do not bother to replicate free_check here */
-
-#if HAVE_MMAP
-  if (chunk_is_mmapped(p))                       /* release mmapped memory. */
-  {
-    munmap_chunk(p);
-    return;
-  }
-#endif
-
-  ar_ptr = arena_for_ptr(p);
-  tsd_getspecific(arena_key, vptr);
-  if(vptr != ATFORK_ARENA_PTR)
-    (void)mutex_lock(&ar_ptr->mutex);
-  chunk_free(ar_ptr, p);
-  if(vptr != ATFORK_ARENA_PTR)
-    (void)mutex_unlock(&ar_ptr->mutex);
-}
-
-#endif /* !defined NO_THREADS */
-
-#endif /* defined _LIBC || defined MALLOC_HOOKS */
-
-
-
-#ifdef _LIBC
-
-/* default method of getting more storage */
-__malloc_ptr_t
-__default_morecore (int inc)
-{
-  __malloc_ptr_t result = (__malloc_ptr_t)sbrk (inc);
-  if (result == (__malloc_ptr_t)-1)
-    return NULL;
-  return result;
-}
- 
-/* We need a wrapper function for one of the additions of POSIX.  */
-int
-__posix_memalign (void **memptr, size_t alignment, size_t size)
-{
-  void *mem;
-
-  /* Test whether the ALIGNMENT argument is valid.  It must be a power
-     of two multiple of sizeof (void *).  */
-  if (alignment % sizeof (void *) != 0 || (alignment & (alignment - 1)) != 0)
-    return EINVAL;
-
-  mem = __libc_memalign (alignment, size);
-
-  if (mem != NULL)
-    {
-      *memptr = mem;
-      return 0;
-    }
-
-  return ENOMEM;
-}
-weak_alias (__posix_memalign, posix_memalign)
-
-weak_alias (__libc_calloc, __calloc) weak_alias (__libc_calloc, calloc)
-weak_alias (__libc_free, __cfree) weak_alias (__libc_free, cfree)
-weak_alias (__libc_free, __free) weak_alias (__libc_free, free)
-weak_alias (__libc_malloc, __malloc) weak_alias (__libc_malloc, malloc)
-weak_alias (__libc_memalign, __memalign) weak_alias (__libc_memalign, memalign)
-weak_alias (__libc_realloc, __realloc) weak_alias (__libc_realloc, realloc)
-weak_alias (__libc_valloc, __valloc) weak_alias (__libc_valloc, valloc)
-weak_alias (__libc_pvalloc, __pvalloc) weak_alias (__libc_pvalloc, pvalloc)
-weak_alias (__libc_mallinfo, __mallinfo) weak_alias (__libc_mallinfo, mallinfo)
-weak_alias (__libc_mallopt, __mallopt) weak_alias (__libc_mallopt, mallopt)
-
-weak_alias (__malloc_stats, malloc_stats)
-weak_alias (__malloc_usable_size, malloc_usable_size)
-weak_alias (__malloc_trim, malloc_trim)
-weak_alias (__malloc_get_state, malloc_get_state)
-weak_alias (__malloc_set_state, malloc_set_state)
-#endif
-
-/*
-
-History:
-
-    V2.6.4-pt3 Thu Feb 20 1997 Wolfram Gloger (wmglo@dent.med.uni-muenchen.de)
-      * Added malloc_get/set_state() (mainly for use in GNU emacs),
-        using interface from Marcus Daniels
-      * All parameters are now adjustable via environment variables
-
-    V2.6.4-pt2 Sat Dec 14 1996 Wolfram Gloger (wmglo@dent.med.uni-muenchen.de)
-      * Added debugging hooks
-      * Fixed possible deadlock in realloc() when out of memory
-      * Don't pollute namespace in glibc: use __getpagesize, __mmap, etc.
-
-    V2.6.4-pt Wed Dec  4 1996 Wolfram Gloger (wmglo@dent.med.uni-muenchen.de)
-      * Very minor updates from the released 2.6.4 version.
-      * Trimmed include file down to exported data structures.
-      * Changes from H.J. Lu for glibc-2.0.
-
-    V2.6.3i-pt Sep 16 1996  Wolfram Gloger (wmglo@dent.med.uni-muenchen.de)
-      * Many changes for multiple threads
-      * Introduced arenas and heaps
-
-    V2.6.3 Sun May 19 08:17:58 1996  Doug Lea  (dl at gee)
-      * Added pvalloc, as recommended by H.J. Liu
-      * Added 64bit pointer support mainly from Wolfram Gloger
-      * Added anonymously donated WIN32 sbrk emulation
-      * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen
-      * malloc_extend_top: fix mask error that caused wastage after
-        foreign sbrks
-      * Add linux mremap support code from HJ Liu
-
-    V2.6.2 Tue Dec  5 06:52:55 1995  Doug Lea  (dl at gee)
-      * Integrated most documentation with the code.
-      * Add support for mmap, with help from
-        Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
-      * Use last_remainder in more cases.
-      * Pack bins using idea from  colin@nyx10.cs.du.edu
-      * Use ordered bins instead of best-fit threshold
-      * Eliminate block-local decls to simplify tracing and debugging.
-      * Support another case of realloc via move into top
-      * Fix error occurring when initial sbrk_base not word-aligned.
-      * Rely on page size for units instead of SBRK_UNIT to
-        avoid surprises about sbrk alignment conventions.
-      * Add mallinfo, mallopt. Thanks to Raymond Nijssen
-        (raymond@es.ele.tue.nl) for the suggestion.
-      * Add `pad' argument to malloc_trim and top_pad mallopt parameter.
-      * More precautions for cases where other routines call sbrk,
-        courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
-      * Added macros etc., allowing use in linux libc from
-        H.J. Lu (hjl@gnu.ai.mit.edu)
-      * Inverted this history list
-
-    V2.6.1 Sat Dec  2 14:10:57 1995  Doug Lea  (dl at gee)
-      * Re-tuned and fixed to behave more nicely with V2.6.0 changes.
-      * Removed all preallocation code since under current scheme
-        the work required to undo bad preallocations exceeds
-        the work saved in good cases for most test programs.
-      * No longer use return list or unconsolidated bins since
-        no scheme using them consistently outperforms those that don't
-        given above changes.
-      * Use best fit for very large chunks to prevent some worst-cases.
-      * Added some support for debugging
-
-    V2.6.0 Sat Nov  4 07:05:23 1995  Doug Lea  (dl at gee)
-      * Removed footers when chunks are in use. Thanks to
-        Paul Wilson (wilson@cs.texas.edu) for the suggestion.
-
-    V2.5.4 Wed Nov  1 07:54:51 1995  Doug Lea  (dl at gee)
-      * Added malloc_trim, with help from Wolfram Gloger
-        (wmglo@Dent.MED.Uni-Muenchen.DE).
-
-    V2.5.3 Tue Apr 26 10:16:01 1994  Doug Lea  (dl at g)
-
-    V2.5.2 Tue Apr  5 16:20:40 1994  Doug Lea  (dl at g)
-      * realloc: try to expand in both directions
-      * malloc: swap order of clean-bin strategy;
-      * realloc: only conditionally expand backwards
-      * Try not to scavenge used bins
-      * Use bin counts as a guide to preallocation
-      * Occasionally bin return list chunks in first scan
-      * Add a few optimizations from colin@nyx10.cs.du.edu
-
-    V2.5.1 Sat Aug 14 15:40:43 1993  Doug Lea  (dl at g)
-      * faster bin computation & slightly different binning
-      * merged all consolidations to one part of malloc proper
-         (eliminating old malloc_find_space & malloc_clean_bin)
-      * Scan 2 returns chunks (not just 1)
-      * Propagate failure in realloc if malloc returns 0
-      * Add stuff to allow compilation on non-ANSI compilers
-          from kpv@research.att.com
-
-    V2.5 Sat Aug  7 07:41:59 1993  Doug Lea  (dl at g.oswego.edu)
-      * removed potential for odd address access in prev_chunk
-      * removed dependency on getpagesize.h
-      * misc cosmetics and a bit more internal documentation
-      * anticosmetics: mangled names in macros to evade debugger strangeness
-      * tested on sparc, hp-700, dec-mips, rs6000
-          with gcc & native cc (hp, dec only) allowing
-          Detlefs & Zorn comparison study (in SIGPLAN Notices.)
-
-    Trial version Fri Aug 28 13:14:29 1992  Doug Lea  (dl at g.oswego.edu)
-      * Based loosely on libg++-1.2X malloc. (It retains some of the overall
-         structure of old version,  but most details differ.)
-
-*/
diff --git a/newlib/libc/sys/linux/mallocr.c b/newlib/libc/sys/linux/mallocr.c
deleted file mode 100644
index b5129a5e1..000000000
--- a/newlib/libc/sys/linux/mallocr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void *
-_malloc_r (struct _reent *ptr, size_t size)
-{
-  return malloc (size);
-}
diff --git a/newlib/libc/sys/linux/malloptr.c b/newlib/libc/sys/linux/malloptr.c
deleted file mode 100644
index 13d4e9f6a..000000000
--- a/newlib/libc/sys/linux/malloptr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-int 
-_mallopt_r (struct _reent *ptr, int param_number, int value)
-{
-  return mallopt (param_number, value);
-}
diff --git a/newlib/libc/sys/linux/mallstatsr.c b/newlib/libc/sys/linux/mallstatsr.c
deleted file mode 100644
index 8a1f64211..000000000
--- a/newlib/libc/sys/linux/mallstatsr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void
-_malloc_stats_r (struct _reent *ptr)
-{
-  malloc_stats ();
-}
diff --git a/newlib/libc/sys/linux/mcheck.c b/newlib/libc/sys/linux/mcheck.c
deleted file mode 100644
index eeb99da89..000000000
--- a/newlib/libc/sys/linux/mcheck.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/* Standard debugging hooks for `malloc'.
-   Copyright (C) 1990-1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Written May 1989 by Mike Haertel.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib, July 9, 2002 by Jeff Johnston */
-
-#ifndef	_MALLOC_INTERNAL
-# define _MALLOC_INTERNAL
-# include <features.h>
-# define _LIBC 1
-# include <malloc.h>
-# include <mcheck.h>
-# include <stdint.h>
-# include <stdio.h>
-# include <stdlib.h>
-# include <libintl.h>
-# include <sys/cdefs.h>
-#endif
-
-/* Old hook values.  */
-static void (*old_free_hook) __P ((__ptr_t ptr, __const __ptr_t));
-static __ptr_t (*old_malloc_hook) __P ((__malloc_size_t size, const __ptr_t));
-static __ptr_t (*old_realloc_hook) __P ((__ptr_t ptr, __malloc_size_t size,
-					 __const __ptr_t));
-
-/* Function to call when something awful happens.  */
-static void (*abortfunc) __P ((enum mcheck_status));
-
-/* Arbitrary magical numbers.  */
-#define MAGICWORD	0xfedabeeb
-#define MAGICFREE	0xd8675309
-#define MAGICBYTE	((char) 0xd7)
-#define MALLOCFLOOD	((char) 0x93)
-#define FREEFLOOD	((char) 0x95)
-
-struct hdr
-  {
-    __malloc_size_t size;	/* Exact size requested by user.  */
-    unsigned long int magic;	/* Magic number to check header integrity.  */
-    struct hdr *prev;
-    struct hdr *next;
-  };
-
-/* This is the beginning of the list of all memory blocks allocated.
-   It is only constructed if the pedantic testing is requested.  */
-static struct hdr *root;
-
-static int mcheck_used;
-
-/* Nonzero if pedentic checking of all blocks is requested.  */
-static int pedantic;
-
-#if defined _LIBC || defined STDC_HEADERS || defined USG
-# include <string.h>
-# define flood memset
-#else
-static void flood __P ((__ptr_t, int, __malloc_size_t));
-static void
-flood (ptr, val, size)
-     __ptr_t ptr;
-     int val;
-     __malloc_size_t size;
-{
-  char *cp = ptr;
-  while (size--)
-    *cp++ = val;
-}
-#endif
-
-static enum mcheck_status checkhdr __P ((const struct hdr *));
-static enum mcheck_status
-checkhdr (hdr)
-     const struct hdr *hdr;
-{
-  enum mcheck_status status;
-
-  if (!mcheck_used)
-    /* Maybe the mcheck used is disabled?  This happens when we find
-       an error and report it.  */
-    return MCHECK_OK;
-
-  switch (hdr->magic ^ ((uintptr_t) hdr->prev + (uintptr_t) hdr->next))
-    {
-    default:
-      status = MCHECK_HEAD;
-      break;
-    case MAGICFREE:
-      status = MCHECK_FREE;
-      break;
-    case MAGICWORD:
-      if (((char *) &hdr[1])[hdr->size] != MAGICBYTE)
-	status = MCHECK_TAIL;
-      else
-	status = MCHECK_OK;
-      break;
-    }
-  if (status != MCHECK_OK)
-    {
-      mcheck_used = 0;
-      (*abortfunc) (status);
-      mcheck_used = 1;
-    }
-  return status;
-}
-
-void
-mcheck_check_all ()
-{
-  /* Walk through all the active blocks and test whether they were tempered
-     with.  */
-  struct hdr *runp = root;
-
-  /* Temporarily turn off the checks.  */
-  pedantic = 0;
-
-  while (runp != NULL)
-    {
-      (void) checkhdr (runp);
-
-      runp = runp->next;
-    }
-
-  /* Turn checks on again.  */
-  pedantic = 1;
-}
-
-static void unlink_blk __P ((struct hdr *ptr));
-static void
-unlink_blk (ptr)
-     struct hdr *ptr;
-{
-  if (ptr->next != NULL)
-    {
-      ptr->next->prev = ptr->prev;
-      ptr->next->magic = MAGICWORD ^ ((uintptr_t) ptr->next->prev
-				      + (uintptr_t) ptr->next->next);
-    }
-  if (ptr->prev != NULL)
-    {
-      ptr->prev->next = ptr->next;
-      ptr->prev->magic = MAGICWORD ^ ((uintptr_t) ptr->prev->prev
-				      + (uintptr_t) ptr->prev->next);
-    }
-  else
-    root = ptr->next;
-}
-
-static void link_blk  __P ((struct hdr *ptr));
-static void
-link_blk (hdr)
-     struct hdr *hdr;
-{
-  hdr->prev = NULL;
-  hdr->next = root;
-  root = hdr;
-  hdr->magic = MAGICWORD ^ (uintptr_t) hdr->next;
-
-  /* And the next block.  */
-  if (hdr->next != NULL)
-    {
-      hdr->next->prev = hdr;
-      hdr->next->magic = MAGICWORD ^ ((uintptr_t) hdr
-				      + (uintptr_t) hdr->next->next);
-    }
-}
-
-static void freehook __P ((__ptr_t, const __ptr_t));
-static void
-freehook (ptr, caller)
-     __ptr_t ptr;
-     const __ptr_t caller;
-{
-  if (pedantic)
-    mcheck_check_all ();
-  if (ptr)
-    {
-      struct hdr *hdr = ((struct hdr *) ptr) - 1;
-      checkhdr (hdr);
-      hdr->magic = MAGICFREE;
-      unlink_blk (hdr);
-      hdr->prev = hdr->next = NULL;
-      flood (ptr, FREEFLOOD, hdr->size);
-      ptr = (__ptr_t) hdr;
-    }
-  __free_hook = old_free_hook;
-  if (old_free_hook != NULL)
-    (*old_free_hook) (ptr, caller);
-  else
-    free (ptr);
-  __free_hook = freehook;
-}
-
-static __ptr_t mallochook __P ((__malloc_size_t, const __ptr_t));
-static __ptr_t
-mallochook (size, caller)
-     __malloc_size_t size;
-     const __ptr_t caller;
-{
-  struct hdr *hdr;
-
-  if (pedantic)
-    mcheck_check_all ();
-
-  __malloc_hook = old_malloc_hook;
-  if (old_malloc_hook != NULL)
-    hdr = (struct hdr *) (*old_malloc_hook) (sizeof (struct hdr) + size + 1,
-					     caller);
-  else
-    hdr = (struct hdr *) malloc (sizeof (struct hdr) + size + 1);
-  __malloc_hook = mallochook;
-  if (hdr == NULL)
-    return NULL;
-
-  hdr->size = size;
-  link_blk (hdr);
-  ((char *) &hdr[1])[size] = MAGICBYTE;
-  flood ((__ptr_t) (hdr + 1), MALLOCFLOOD, size);
-  return (__ptr_t) (hdr + 1);
-}
-
-static __ptr_t reallochook __P ((__ptr_t, __malloc_size_t, const __ptr_t));
-static __ptr_t
-reallochook (ptr, size, caller)
-     __ptr_t ptr;
-     __malloc_size_t size;
-     const __ptr_t caller;
-{
-  struct hdr *hdr;
-  __malloc_size_t osize;
-
-  if (pedantic)
-    mcheck_check_all ();
-
-  if (ptr)
-    {
-      hdr = ((struct hdr *) ptr) - 1;
-      osize = hdr->size;
-
-      checkhdr (hdr);
-      unlink_blk (hdr);
-      if (size < osize)
-	flood ((char *) ptr + size, FREEFLOOD, osize - size);
-    }
-  else
-    {
-      osize = 0;
-      hdr = NULL;
-    }
-  __free_hook = old_free_hook;
-  __malloc_hook = old_malloc_hook;
-  __realloc_hook = old_realloc_hook;
-  if (old_realloc_hook != NULL)
-    hdr = (struct hdr *) (*old_realloc_hook) ((__ptr_t) hdr,
-					      sizeof (struct hdr) + size + 1,
-					      caller);
-  else
-    hdr = (struct hdr *) realloc ((__ptr_t) hdr,
-				  sizeof (struct hdr) + size + 1);
-  __free_hook = freehook;
-  __malloc_hook = mallochook;
-  __realloc_hook = reallochook;
-  if (hdr == NULL)
-    return NULL;
-
-  hdr->size = size;
-  link_blk (hdr);
-  ((char *) &hdr[1])[size] = MAGICBYTE;
-  if (size > osize)
-    flood ((char *) (hdr + 1) + osize, MALLOCFLOOD, size - osize);
-  return (__ptr_t) (hdr + 1);
-}
-
-static void mabort __P ((enum mcheck_status status))
-     __attribute__ ((noreturn));
-static void
-mabort (status)
-     enum mcheck_status status;
-{
-  const char *msg;
-  switch (status)
-    {
-    case MCHECK_OK:
-      msg = _("memory is consistent, library is buggy\n");
-      break;
-    case MCHECK_HEAD:
-      msg = _("memory clobbered before allocated block\n");
-      break;
-    case MCHECK_TAIL:
-      msg = _("memory clobbered past end of allocated block\n");
-      break;
-    case MCHECK_FREE:
-      msg = _("block freed twice\n");
-      break;
-    default:
-      msg = _("bogus mcheck_status, library is buggy\n");
-      break;
-    }
-  fprintf (stderr, "mcheck: %s", msg);
-  fflush (stderr);
-  abort ();
-}
-
-int
-mcheck (func)
-     void (*func) __P ((enum mcheck_status));
-{
-  abortfunc = (func != NULL) ? func : &mabort;
-
-  /* These hooks may not be safely inserted if malloc is already in use.  */
-  if (__malloc_initialized <= 0 && !mcheck_used)
-    {
-      /* We call malloc() once here to ensure it is initialized.  */
-      void *p = malloc (0);
-      free (p);
-
-      old_free_hook = __free_hook;
-      __free_hook = freehook;
-      old_malloc_hook = __malloc_hook;
-      __malloc_hook = mallochook;
-      old_realloc_hook = __realloc_hook;
-      __realloc_hook = reallochook;
-      mcheck_used = 1;
-    }
-
-  return mcheck_used ? 0 : -1;
-}
-
-int
-mcheck_pedantic (func)
-      void (*func) __P ((enum mcheck_status));
-{
-  int res = mcheck (func);
-  if (res == 0)
-    pedantic = 1;
-  return res;
-}
-
-enum mcheck_status
-mprobe (__ptr_t ptr)
-{
-  return mcheck_used ? checkhdr (((struct hdr *) ptr) - 1) : MCHECK_DISABLED;
-}
diff --git a/newlib/libc/sys/linux/mhooks.h b/newlib/libc/sys/linux/mhooks.h
deleted file mode 100644
index 4a2e60656..000000000
--- a/newlib/libc/sys/linux/mhooks.h
+++ /dev/null
@@ -1,12 +0,0 @@
-
-/* Functions used by mcheck/mprobe */
-extern void (*__malloc_initialize_hook) (void);
-extern void (*__free_hook) (void * __ptr, const void *);
-extern void * (*__malloc_hook) (size_t __size, const void *);
-extern void * (*__realloc_hook) (void * __ptr, size_t __size, const void *);
-extern void * (*__memalign_hook) (size_t __alignment, size_t __size,
-                                  const void *);
-extern void (*__after_morecore_hook) (void);
-extern void __malloc_check_init (void);
-
-extern int __malloc_initialized;
diff --git a/newlib/libc/sys/linux/mmap.c b/newlib/libc/sys/linux/mmap.c
deleted file mode 100644
index 6af2b851d..000000000
--- a/newlib/libc/sys/linux/mmap.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* libc/sys/linux/mmap.c - Memory mapping functions */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <sys/mman.h>
-#include <machine/syscall.h>
-
-_syscall6(void *,mmap,void *,addr,size_t,len,int,prot,int,flags,int,fd,off_t,off);
-_syscall2(int,munmap,void *,addr,size_t,len);
-_syscall1(int,mlockall,int,flags);
-_syscall0(int,munlockall);
-_syscall2(int,mlock,const void *,addr,size_t,len);
-_syscall2(int,munlock,const void *,addr,size_t,len);
-_syscall3(int,mprotect,void *,addr,size_t,len,int,prot);
-_syscall3(int,msync,void *,addr,size_t,len,int,flags);
-_syscall4(void *,mremap,void *,addr,size_t,oldlen,size_t,newlen,int,maymove);
-
-weak_alias(__libc_mmap,__mmap)
-weak_alias(__libc_munmap,__munmap)
-weak_alias(__libc_mremap,__mremap)
diff --git a/newlib/libc/sys/linux/mntent.c b/newlib/libc/sys/linux/mntent.c
deleted file mode 100644
index 0101b94e4..000000000
--- a/newlib/libc/sys/linux/mntent.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* Utilities for reading/writing fstab, mtab, etc.
-   Copyright (C) 1995, 1996, 1997, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <features.h>
-#include <mntent.h>
-#include <stdlib.h>
-#include <libc-symbols.h>
-#define  _LIBC 1
-#define  NOT_IN_libc 1
-#include <bits/libc-lock.h>
-
-/* We don't want to allocate the static buffer all the time since it
-   is not always used (in fact, rather infrequently).  Accept the
-   extra cost of a `malloc'.  */
-static char *getmntent_buffer;
-
-/* This is the size of the buffer.  This is really big.  */
-#define BUFFER_SIZE	4096
-
-
-static void
-allocate (void)
-{
-  getmntent_buffer = (char *) malloc (BUFFER_SIZE);
-}
-
-
-struct mntent *
-getmntent (FILE *stream)
-{
-  static struct mntent m;
-  static int once;
-
-  do {
-    if (__pthread_once != NULL)
-      __pthread_once (&once, allocate);
-    else if (once == 0) {
-      allocate ();
-      once = !(0);
-    }
-  } while (0);
-
-
-  if (getmntent_buffer == NULL)
-    /* If no core is available we don't have a chance to run the
-       program successfully and so returning NULL is an acceptable
-       result.  */
-    return NULL;
-
-  return __getmntent_r (stream, &m, getmntent_buffer, BUFFER_SIZE);
-}
-
-
-/* Make sure the memory is freed if the programs ends while in
-   memory-debugging mode and something actually was allocated.  */
-static void
-__attribute__ ((unused))
-free_mem (void)
-{
-  free (getmntent_buffer);
-}
-
-text_set_element (__libc_subfreeres, free_mem);
diff --git a/newlib/libc/sys/linux/mntent_r.c b/newlib/libc/sys/linux/mntent_r.c
deleted file mode 100644
index b534fb69d..000000000
--- a/newlib/libc/sys/linux/mntent_r.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* Utilities for reading/writing fstab, mtab, etc.
-   Copyright (C) 1995-2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <alloca.h>
-#include <mntent.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <machine/weakalias.h>
-
-/* Prepare to begin reading and/or writing mount table entries from the
-   beginning of FILE.  MODE is as for `fopen'.  */
-FILE *
-__setmntent (const char *file, const char *mode)
-{
-  FILE *result = fopen (file, mode);
-
-  return result;
-}
-weak_alias (__setmntent, setmntent)
-
-
-/* Close a stream opened with `setmntent'.  */
-int
-__endmntent (FILE *stream)
-{
-  if (stream)		/* SunOS 4.x allows for NULL stream */
-    fclose (stream);
-  return 1;		/* SunOS 4.x says to always return 1 */
-}
-weak_alias (__endmntent, endmntent)
-
-
-/* Since the values in a line are separated by spaces, a name cannot
-   contain a space.  Therefore some programs encode spaces in names
-   by the strings "\040".  We undo the encoding when reading an entry.
-   The decoding happens in place.  */
-static char *
-decode_name (char *buf)
-{
-  char *rp = buf;
-  char *wp = buf;
-
-  do
-    if (rp[0] == '\\' && rp[1] == '0' && rp[2] == '4' && rp[3] == '0')
-      {
-	/* \040 is a SPACE.  */
-	*wp++ = ' ';
-	rp += 3;
-      }
-    else if (rp[0] == '\\' && rp[1] == '0' && rp[2] == '1' && rp[3] == '2')
-      {
-	/* \012 is a TAB.  */
-	*wp++ = '\t';
-	rp += 3;
-      }
-    else if (rp[0] == '\\' && rp[1] == '\\')
-      {
-	/* We have to escape \\ to be able to represent all characters.  */
-	*wp++ = '\\';
-	rp += 1;
-      }
-    else
-      *wp++ = *rp;
-  while (*rp++ != '\0');
-
-  return buf;
-}
-
-
-/* Read one mount table entry from STREAM.  Returns a pointer to storage
-   reused on the next call, or null for EOF or error (use feof/ferror to
-   check).  */
-struct mntent *
-__getmntent_r (FILE *stream, struct mntent *mp, char *buffer, int bufsiz)
-{
-  char *cp;
-  char *head;
-
-  flockfile (stream);
-  do
-    {
-      char *end_ptr;
-
-      if (fgets (buffer, bufsiz, stream) == NULL)
-	{
-	  funlockfile (stream);
-	  return NULL;
-	}
-
-      end_ptr = strchr (buffer, '\n');
-      if (end_ptr != NULL)	/* chop newline */
-	*end_ptr = '\0';
-      else
-	{
-	  /* Not the whole line was read.  Do it now but forget it.  */
-	  char tmp[1024];
-	  while (fgets (tmp, sizeof tmp, stream) != NULL)
-	    if (strchr (tmp, '\n') != NULL)
-	      break;
-	}
-
-      head = buffer + strspn (buffer, " \t");
-      /* skip empty lines and comment lines:  */
-    }
-  while (head[0] == '\0' || head[0] == '#');
-
-  cp = strsep (&head, " \t");
-  mp->mnt_fsname = cp != NULL ? decode_name (cp) : (char *) "";
-  if (head)
-    head += strspn (head, " \t");
-  cp = strsep (&head, " \t");
-  mp->mnt_dir = cp != NULL ? decode_name (cp) : (char *) "";
-  if (head)
-    head += strspn (head, " \t");
-  cp = strsep (&head, " \t");
-  mp->mnt_type = cp != NULL ? decode_name (cp) : (char *) "";
-  if (head)
-    head += strspn (head, " \t");
-  cp = strsep (&head, " \t");
-  mp->mnt_opts = cp != NULL ? decode_name (cp) : (char *) "";
-  switch (head ? sscanf (head, " %d %d ", &mp->mnt_freq, &mp->mnt_passno) : 0)
-    {
-    case 0:
-      mp->mnt_freq = 0;
-    case 1:
-      mp->mnt_passno = 0;
-    case 2:
-      break;
-    }
-  funlockfile (stream);
-
-  return mp;
-}
-weak_alias (__getmntent_r, getmntent_r)
-
-
-/* We have to use an encoding for names if they contain spaces or tabs.
-   To be able to represent all characters we also have to escape the
-   backslash itself.  This "function" must be a macro since we use
-   `alloca'.  */
-#define encode_name(name) \
-  do {									      \
-    const char *rp = name;						      \
-									      \
-    while (*rp != '\0')							      \
-      if (*rp == ' ' || *rp == '\t' || *rp == '\\')			      \
-	break;								      \
-      else								      \
-	++rp;								      \
-									      \
-    if (*rp != '\0')							      \
-      {									      \
-	/* In the worst case the length of the string can increase to	      \
-	   founr times the current length.  */				      \
-	char *wp;							      \
-									      \
-	rp = name;							      \
-	name = wp = (char *) alloca (strlen (name) * 4 + 1);		      \
-									      \
-	do								      \
-	  if (*rp == ' ')						      \
-	    {								      \
-	      *wp++ = '\\';						      \
-	      *wp++ = '0';						      \
-	      *wp++ = '4';						      \
-	      *wp++ = '0';						      \
-	    }								      \
-	  else if (*rp == '\t')						      \
-	    {								      \
-	      *wp++ = '\\';						      \
-	      *wp++ = '0';						      \
-	      *wp++ = '1';						      \
-	      *wp++ = '2';						      \
-	    }								      \
-	  else if (*rp == '\\')						      \
-	    {								      \
-	      *wp++ = '\\';						      \
-	      *wp++ = '\\';						      \
-	    }								      \
-	  else								      \
-	    *wp++ = *rp;						      \
-	while (*rp++ != '\0');						      \
-      }									      \
-  } while (0)
-
-
-/* Write the mount table entry described by MNT to STREAM.
-   Return zero on success, nonzero on failure.  */
-int
-__addmntent (FILE *stream, const struct mntent *mnt)
-{
-  struct mntent mntcopy = *mnt;
-  if (fseek (stream, 0, SEEK_END))
-    return 1;
-
-  /* Encode spaces and tabs in the names.  */
-  encode_name (mntcopy.mnt_fsname);
-  encode_name (mntcopy.mnt_dir);
-  encode_name (mntcopy.mnt_type);
-  encode_name (mntcopy.mnt_opts);
-
-  return (fprintf (stream, "%s %s %s %s %d %d\n",
-		   mntcopy.mnt_fsname,
-		   mntcopy.mnt_dir,
-		   mntcopy.mnt_type,
-		   mntcopy.mnt_opts,
-		   mntcopy.mnt_freq,
-		   mntcopy.mnt_passno)
-	  < 0 ? 1 : 0);
-}
-weak_alias (__addmntent, addmntent)
-
-
-/* Search MNT->mnt_opts for an option matching OPT.
-   Returns the address of the substring, or null if none found.  */
-char *
-__hasmntopt (const struct mntent *mnt, const char *opt)
-{
-  const size_t optlen = strlen (opt);
-  char *rest = mnt->mnt_opts, *p;
-
-  while ((p = strstr (rest, opt)) != NULL)
-    {
-      if (p == rest
-	  || (p[-1] == ','
-	      && (p[optlen] == '\0' ||
-		  p[optlen] == '='  ||
-		  p[optlen] == ',')))
-	return p;
-
-      rest = strchr (rest, ',');
-      if (rest == NULL)
-	break;
-      ++rest;
-    }
-
-  return NULL;
-}
-weak_alias (__hasmntopt, hasmntopt)
diff --git a/newlib/libc/sys/linux/mq_close.c b/newlib/libc/sys/linux/mq_close.c
deleted file mode 100644
index 884c30f64..000000000
--- a/newlib/libc/sys/linux/mq_close.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <errno.h>
-#include <sys/sem.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-int
-mq_close (mqd_t msgid)
-{
-  struct libc_mq *info;
-  struct sembuf sb0 = {0, -1, 0};
-  int rc;
-  int semid;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  /* lock message queue */
-  semid = info->semid;
-  rc = semop (semid, &sb0, 1);
-
-  if (rc == 0)
-    {
-      __cleanup_mq (msgid);
-      
-      /* unlock message queue */
-      sb0.sem_op = 1;
-      semop (semid, &sb0, 1);
-    }
-
-  return rc;
-}
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_getattr.c b/newlib/libc/sys/linux/mq_getattr.c
deleted file mode 100644
index 65813f3b3..000000000
--- a/newlib/libc/sys/linux/mq_getattr.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <errno.h>
-#include <sys/sem.h>
-#include <string.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-int
-mq_getattr (mqd_t msgid, struct mq_attr *mqstat)
-{
-  struct libc_mq *info;
-  struct sembuf sb0 = {0, -1, 0};
-  int num_msgs;
-  int rc = 0;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  /* temporarily lock message queue */
-  semop (info->semid, &sb0, 1);
-
-  num_msgs = semctl (info->semid, 3, GETVAL);
-  if (num_msgs >= 0)
-    {
-      memcpy (mqstat, info->attr, sizeof(struct mq_attr));
-      mqstat->mq_curmsgs = num_msgs;
-    }
-  else
-    rc = -1;
-
-  /* release message queue */
-  sb0.sem_op = 1;
-  semop (info->semid, &sb0, 1);
-
-  return rc;
-}
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_notify.c b/newlib/libc/sys/linux/mq_notify.c
deleted file mode 100644
index fd4606bd4..000000000
--- a/newlib/libc/sys/linux/mq_notify.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <errno.h>
-#include <machine/weakalias.h>
-
-#include "mqlocal.h"
-
-int
-__libc_mq_notify (mqd_t msgid, const struct sigevent *notification)
-{
-  errno = ENOSYS;
-  return -1;
-}
-weak_alias (__libc_mq_notify, mq_notify)
-
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_open.c b/newlib/libc/sys/linux/mq_open.c
deleted file mode 100644
index 9b72e9073..000000000
--- a/newlib/libc/sys/linux/mq_open.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <string.h>
-#include <stdlib.h>
-#include <time.h>
-#include <stdarg.h>
-#include <machine/weakalias.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-#define	NHASH	32	          /* Num of hash lists, must be a power of 2 */
-#define	LOCHASH(i)	((i)&(NHASH-1))
-
-static long	mq_index;	/* Index of next entry */
-static struct	libc_mq *mq_hash[NHASH];   /* Hash list heads for mqopen_infos */
-
-__LOCK_INIT(static, mq_hash_lock);
-
-mqd_t
-mq_open (const char *name, int oflag, ...)
-{
-  MSG *wrbuf = NULL;
-  MSG *rdbuf = NULL;
-  int msgqid = -1;
-  int rc = -1;
-  int fd = -1;
-  int semid = -1;
-  int created = 0;
-  key_t key = (key_t)-1;
-  struct mq_attr *attr = (struct mq_attr *)MAP_FAILED;
-  struct sembuf sb = {0, 0, 0};
-  mode_t mode = 0;
-  int size;
-  int i, index, saved_errno;
-  char *real_name;
-  char *ptr;
-  struct mq_attr *user_attr = NULL;
-  struct libc_mq *info;
-  union semun arg;
-  
-  /* ignore opening slash if present */
-  if (*name == '/')
-    ++name;  
-  size = strlen(name);
-
-  if ((real_name = (char *)malloc (size + sizeof(MSGQ_PREFIX))) == NULL ||
-      (info = (struct libc_mq *)malloc (sizeof(struct libc_mq))) == NULL)
-    {
-      errno = ENOSPC;
-      if (real_name)
-	free (real_name);
-      return (mqd_t)-1;
-    }
-  
-  /* use given name to create shared memory file name - we convert any
-     slashes to underscores so we don't have to create directories */
-  memcpy (real_name, MSGQ_PREFIX, sizeof(MSGQ_PREFIX) - 1);
-  memcpy (real_name + sizeof(MSGQ_PREFIX) - 1, name, size + 1);
-  ptr = real_name + sizeof(MSGQ_PREFIX) - 1;
-  for (i = 0; i < size; ++i)
-    {
-      if (*ptr == '/')
-	*ptr = '_';
-      ++ptr;
-    }
-
-  /* open shared memory file based on msg queue open flags and then use memory
-     file to create a unique key to use for semaphores, etc.. */
-  if (oflag & O_CREAT)
-    {
-      va_list list;
-      va_start (list, oflag);
-
-      saved_errno = errno;
-      mode = (mode_t)va_arg (list, int);
-      user_attr = va_arg(list,struct mq_attr *);
-      va_end (list);
-
-      /* attempt to open the shared memory file for exclusive create so we know
-	 whether we are the owners or not */
-      fd = open (real_name, O_RDWR | O_CREAT | O_EXCL, mode);
-      if (fd < 0 && (oflag & O_EXCL))
-	{
-	  /* we failed and the user wanted exclusive create */
-	  free (real_name);
-	  free (info);
-	  return (mqd_t)-1;
-	}
-      errno = saved_errno;
-      /* check if we created the file or not */
-      if (fd >= 0)
-        created = 1;
-    }
-	  
-  if (fd < 0)
-    fd = open (real_name, O_RDWR, 0);
-
-  if (fd >= 0)
-    key = ftok(real_name, 255);
-
-  if (key != (key_t)-1)
-    /* memory map the shared memory file so we have a global shared data area to use */
-    attr = (struct mq_attr *)mmap (0, sizeof(struct mq_attr), PROT_READ | PROT_WRITE,
-				   MAP_SHARED, fd, 0);
-  
-  if (attr != (struct mq_attr *)MAP_FAILED)
-    {
-      /* we need semaphores to prevent multi-process race conditions on the
-	 shared storage which contains a shared structure.  The following
-	 are the ones we need.
-	 
-	 0 = open semaphore
-	 1 = number of opens
-	 2 = number of writes left until queue is full
-	 3 = number of reads available in queue
-	 4 = notify semaphore 
-	 5 = number of readers */
-      arg.val = 0;
-      /* make sure the creator of the shared memory file also is the creator of the
-	 semaphores...this will ensure that it also creates the message queue */
-      if (created)
-	{
-	  saved_errno = errno;
-	  semid = semget (key, 6, IPC_CREAT | IPC_EXCL | mode);
-	  errno = saved_errno;
-	  /* now that we have created the semaphore, we should initialize it */
-	  if (semid != -1)
-	    semctl (semid, 0, SETVAL, arg);
-	}
-      else
-	{
-	  /* if we didn't create the shared memory file but have gotten to here, we want
-	     to ensure we haven't gotten ahead of the creator temporarily so we will
-	     loop until the semaphore exists.  This ensures that the creator will be the
-	     one to create the message queue with the correct mode and we will be blocked
-	     by the open semaphore 0.  We impose a time limit to ensure something terrible
-	     hasn't gone wrong. */
-	  struct timespec tms;
-	  int i;
-
-	  tms.tv_sec = 0;
-	  tms.tv_nsec = 10000; /* 10 microseconds */
-	  for (i = 0; i < 100; ++i)
-	    {
-	      if ((semid = semget (key, 6, 0)) != -1)
-		break;
-	      /* sleep in case we our a higher priority process */
-	      nanosleep (&tms, NULL);
-	    }
-	}
-    }
-
-  if (semid != -1)
-    {
-      /* acquire main open semaphore if we didn't create it */
-      if (!created)
-	{
-	  sb.sem_op = -1;
-	  rc = semop (semid, &sb, 1);
-	}
-      else
-	rc = 0; /* need this to continue below */
-    }
-      
-  if (rc == 0)
-    {
-      if (created)
-	{
-	  /* the creator must get here first so the message queue will be created */
-	  msgqid = msgget (key, IPC_CREAT | mode); 
-	  if (msgqid >= 0)
-	    {
-	      /* we have created the message queue so check and set the attributes */
-	      if ((wrbuf = (MSG *)malloc (user_attr->mq_msgsize + sizeof(int))) == NULL ||
-		  (rdbuf = (MSG *)malloc (user_attr->mq_msgsize + sizeof(int))) == NULL ||
-		  user_attr == NULL || user_attr->mq_msgsize <= 0 || user_attr->mq_maxmsg <= 0)
-		{
-		  /* we're out of space and we created the message queue so we should
-		     try to remove it */
-		  msgctl (msgqid, IPC_RMID, NULL);
-		  msgqid = -1; /* allow clean up to occur below */
-		  if (wrbuf && rdbuf)
-		    errno = EINVAL;
-		  else
-		    errno = ENOSPC;
-		}
-	      else /* valid attributes */
-		{
-		  write (fd, user_attr, sizeof(struct mq_attr));
-		  attr->mq_curmsgs = 0;
-		  attr->mq_flags = oflag & O_NONBLOCK;
-		  arg.val = 0;
-		  semctl (semid, 1, SETVAL, arg); /* number of opens starts at 0 */
-		  semctl (semid, 3, SETVAL, arg); /* number of reads available starts at 0 */
-		  semctl (semid, 5, SETVAL, arg); /* number of readers starts at 0 */
-		  arg.val = 1;
-		  semctl (semid, 4, SETVAL, arg); /* notify semaphore */
-		  arg.val = user_attr->mq_maxmsg;
-		  semctl (semid, 2, SETVAL, arg); /* number of writes left starts at mq_maxmsg */
-		}
-	    }
-	}
-      else /* just open it */
-        {
-	  msgqid = msgget (key, 0);
-	  wrbuf = (MSG *)malloc (attr->mq_msgsize + sizeof(int));
-	  rdbuf = (MSG *)malloc (attr->mq_msgsize + sizeof(int));
-        }
-      
-      /* release semaphore acquired earlier */
-      sb.sem_op = 1;
-      semop (semid, &sb, 1);
-    }
-
-  /* if we get here and we haven't got a message queue id, then we need to clean up 
-     our mess and return failure */
-  if (msgqid < 0)
-    {
-      if (fd >= 0)
-	close (fd);
-      if (attr != (struct mq_attr *)MAP_FAILED)
-	munmap (attr, sizeof(struct mq_attr));
-      if (created)
-	{
-	  unlink (real_name);
-	  if (semid != -1)
-	    semctl (semid, 0, IPC_RMID);
-	}
-      free (real_name);
-      free (info);
-      if (wrbuf)
-	free (wrbuf);
-      if (rdbuf)
-	free (rdbuf);
-      return (mqd_t)-1;
-    }
-
-  /* we are successful so register the message queue */
-
-  /* up the count of msg queue opens */
-  sb.sem_op = 1;
-  sb.sem_num = 1;
-  semop (semid, &sb, 1);
-
-  /* success, translate into index into mq_info array */  
-  __lock_acquire(mq_hash_lock);
-  index = mq_index++;
-  info->index = index;
-  info->msgqid = msgqid;
-  info->name = real_name;
-  info->semid = semid;
-  info->fd = fd;
-  info->oflag = oflag;
-  info->wrbuf = wrbuf;
-  info->rdbuf = rdbuf;
-  info->cleanup_notify = NULL;
-  info->next = mq_hash[LOCHASH(index)];
-  info->attr = attr;
-  mq_hash[LOCHASH(index)] = info;
-  __lock_release(mq_hash_lock);
-
-  return (mqd_t)index;
-}
-
-struct libc_mq *
-__find_mq (mqd_t mq)
-{
-  struct libc_mq *ptr;
-
-  __lock_acquire(mq_hash_lock);
-
-  ptr = mq_hash[LOCHASH((int)mq)];
-
-  while (ptr)
-    {
-      if (ptr->index == (int)mq)
-        break;
-      ptr = ptr->next;
-    }
-
-  __lock_release(mq_hash_lock);
-
-  return ptr;
-}
-      
-void
-__cleanup_mq (mqd_t mq)
-{
-  struct libc_mq *ptr;
-  struct libc_mq *prev;
-  int semid;
-  struct sembuf sb = {0, 0, 0};
-
-  __lock_acquire(mq_hash_lock);
-
-  ptr = mq_hash[LOCHASH((int)mq)];
-  prev = NULL;
-
-  while (ptr)
-    {
-      if (ptr->index == (int)mq)
-        break;
-      prev = ptr;
-      ptr = ptr->next;
-    }
-
-  if (ptr != NULL)
-    {
-      if (ptr->cleanup_notify != NULL)
-	ptr->cleanup_notify (ptr);
-      if (prev != NULL)
-	prev->next = ptr->next;
-      else
-	mq_hash[LOCHASH((int)mq)] = NULL;
-      munmap (ptr->attr, sizeof(struct mq_attr));
-      close (ptr->fd);
-      free (ptr->name);
-      free (ptr->wrbuf);
-      free (ptr->rdbuf);
-      semid = ptr->semid;
-      free (ptr);
-      /* lower the count of msg queue opens */
-      sb.sem_op = -1;
-      sb.sem_num = 1;
-      sb.sem_flg = IPC_NOWAIT;
-      semop (semid, &sb, 1);
-    }
-
-  __lock_release(mq_hash_lock);
-}
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_receive.c b/newlib/libc/sys/linux/mq_receive.c
deleted file mode 100644
index 4dae0810b..000000000
--- a/newlib/libc/sys/linux/mq_receive.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <string.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-__LOCK_INIT(static, mq_rdbuf_lock);
-
-ssize_t
-mq_receive (mqd_t msgid, char *msg, size_t msg_len, unsigned int *msg_prio)
-{
-  struct libc_mq *info;
-  struct sembuf sb2 = {2, 1, 0};
-  struct sembuf sb3 = {3, -1, IPC_NOWAIT};
-  struct sembuf sb5 = {5, 1, IPC_NOWAIT};
-  ssize_t num_bytes;
-  int ipcflag;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL || (info->oflag & O_ACCMODE) == O_WRONLY)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  if (msg_len < info->attr->mq_msgsize)
-    {
-      errno = EMSGSIZE;
-      return -1;
-    }
-
-  __lock_acquire (mq_rdbuf_lock);
-
-  ipcflag = (info->attr->mq_flags & O_NONBLOCK) ? IPC_NOWAIT : 0;
-
-  semop (info->semid, &sb5, 1); /* increase number of readers */
-  num_bytes = msgrcv (info->msgqid, info->rdbuf, msg_len, -MQ_PRIO_MAX, ipcflag);
-  sb5.sem_op = -1;
-  semop (info->semid, &sb5, 1); /* decrease number of readers */
-
-  if (num_bytes != (ssize_t)-1)
-    {
-      semop (info->semid, &sb2, 1); /* add one to messages left to write */
-      semop (info->semid, &sb3, 1); /* subtract one from messages to read */
-      memcpy (msg, info->rdbuf->text, num_bytes);
-      if (msg_prio != NULL)
-	*msg_prio = MQ_PRIO_MAX - info->rdbuf->type;
-    }
-  
-  __lock_release (mq_rdbuf_lock);
-  return num_bytes;
-}
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_send.c b/newlib/libc/sys/linux/mq_send.c
deleted file mode 100644
index d3291fd2e..000000000
--- a/newlib/libc/sys/linux/mq_send.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <string.h>
-#include <stdlib.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-__LOCK_INIT(static, mq_wrbuf_lock);
-
-int
-mq_send (mqd_t msgid, const char *msg, size_t msg_len, unsigned int msg_prio)
-{
-  struct libc_mq *info;
-  struct sembuf sb2 = {2, -1, 0};
-  struct sembuf sb3 = {3, 1, 0};
-  int rc;
-  int ipcflag;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL || (info->oflag & O_ACCMODE) == O_RDONLY)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  if (msg_len > info->attr->mq_msgsize)
-    {
-      errno = EMSGSIZE;
-      return -1;
-    }
-
-  if (msg_prio > MQ_PRIO_MAX)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  __lock_acquire (mq_wrbuf_lock);
-
-  memcpy (info->wrbuf->text, msg, msg_len);
-  info->wrbuf->type = (MQ_PRIO_MAX - msg_prio);
-
-  ipcflag = (info->attr->mq_flags & O_NONBLOCK) ? IPC_NOWAIT : 0;
-  sb2.sem_flg = ipcflag;
-
-  /* check to see if max msgs are on queue */
-  rc = semop (info->semid, &sb2, 1);
-
-  if (rc == 0)
-    rc = msgsnd (info->msgqid, info->wrbuf, msg_len, ipcflag);
-
-  if (rc == 0)
-    semop (info->semid, &sb3, 1);  /* increment number of reads */
-
-  __lock_release (mq_wrbuf_lock);
-  return rc;
-}
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_setattr.c b/newlib/libc/sys/linux/mq_setattr.c
deleted file mode 100644
index 69f6cd598..000000000
--- a/newlib/libc/sys/linux/mq_setattr.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <errno.h>
-#include <sys/sem.h>
-#include <string.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-int
-mq_setattr (mqd_t msgid, const struct mq_attr *mqstat, struct mq_attr *omqstat)
-{
-  struct libc_mq *info;
-  struct sembuf sb0 = {0, -1, 0};
-  int num_msgs;
-  int rc = 0;
-
-  info = __find_mq (msgid);
-
-  if (info == NULL)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  /* temporarily lock message queue */
-  semop (info->semid, &sb0, 1);
-
-  /* make copy of old structure */
-  if (omqstat != NULL)
-    {
-      num_msgs = semctl (info->semid, 3, GETVAL);
-      if (num_msgs >= 0)
-	{
-	  memcpy (omqstat, info->attr, sizeof(struct mq_attr));
-	  omqstat->mq_curmsgs = num_msgs;
-	}
-      else
-	rc = -1;
-    }
-  
-  /* only the mq_flags field can be changed */
-  info->attr->mq_flags = mqstat->mq_flags;
-
-  /* release message queue */
-  sb0.sem_op = 1;
-  semop (info->semid, &sb0, 1);
-
-  return rc;
-}
-      
-
-
-
-
-
diff --git a/newlib/libc/sys/linux/mq_unlink.c b/newlib/libc/sys/linux/mq_unlink.c
deleted file mode 100644
index ce7bd0e01..000000000
--- a/newlib/libc/sys/linux/mq_unlink.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <mqueue.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <string.h>
-#include <stdlib.h>
-#include <machine/weakalias.h>
-#define _LIBC 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#include "mqlocal.h"
-
-int
-mq_unlink (const char *name)
-{
-  int size;
-  int saved_errno;
-  char *real_name;
-  char *ptr;
-  int i, rc;
-  int semid, msgqid;
-  key_t key;
-  
-  /* ignore opening slash if present */
-  if (*name == '/')
-    ++name;  
-  size = strlen(name);
-
-  if ((real_name = (char *)malloc (size + sizeof(MSGQ_PREFIX))) == NULL)
-    {
-      errno = ENOSPC;
-      return -1;
-    }
-  
-  /* use given name to create shared memory file name - we convert any
-     slashes to underscores so we don't have to create directories */
-  memcpy (real_name, MSGQ_PREFIX, sizeof(MSGQ_PREFIX) - 1);
-  memcpy (real_name + sizeof(MSGQ_PREFIX) - 1, name, size + 1);
-  ptr = real_name + sizeof(MSGQ_PREFIX) - 1;
-  for (i = 0; i < size; ++i)
-    {
-      if (*ptr == '/')
-	*ptr = '_';
-      ++ptr;
-    }
-
-  /* get key and then unlink shared memory file */
-  if ((key = ftok(real_name, 255)) == (key_t)-1)
-    return -1;
-
-  rc = unlink (real_name);
-
-  if (rc == 0)
-    {
-      /* try to remove semaphore and msg queues associated with shared memory file */
-      saved_errno = errno;
-      semid = semget (key, 6, 0);
-      if (semid != -1)
-	semctl (semid, 0, IPC_RMID);
-      msgqid = msgget (key, 0);
-      if (msgqid != -1)
-	msgctl (msgqid, IPC_RMID, NULL);
-      errno = saved_errno;
-    }
-
-  return rc;
-}
diff --git a/newlib/libc/sys/linux/mqlocal.h b/newlib/libc/sys/linux/mqlocal.h
deleted file mode 100644
index 56fd66c2d..000000000
--- a/newlib/libc/sys/linux/mqlocal.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* local definitions needed by mq routines */
-
-#include <sys/msg.h>
-#include <signal.h>
-
-/* a message */
-typedef struct
-{
-  unsigned int type;
-  char text[1];
-} MSG; 
-
-union semun {
-  int val;
-  struct semid_ds *buf;
-  unsigned short  *array;
-} arg;
-
-/*
- * One of these structures is malloced to describe any open message queue
- * each time mq_open is called. 
- */
-
-struct libc_mq;
-
-struct libc_mq {
-  int              index;          /* index of this message queue */
-  int              msgqid;         /* value returned by msgget */
-  int              semid;          /* semaphore id */
-  int              fd;             /* fd of shared memory file */
-  int              oflag;          /* original open flag used */
-  int              th;             /* thread id for mq_notify */
-  char            *name;           /* name used */
-  MSG             *wrbuf;          /* msg write buffer */
-  MSG             *rdbuf;          /* msg read buffer */
-  struct mq_attr  *attr;           /* pointer to attribute structure */
-  struct sigevent *sigevent;       /* used for mq_notify */
-  void (*cleanup_notify)(struct libc_mq *); /* also used for mq_notify */
-  struct libc_mq  *next;           /* next info struct in hash table */
-};
-
-extern struct libc_mq *__find_mq (mqd_t mq);
-extern void __cleanup_mq (mqd_t mq);
-extern void __cleanup_mq_notify (struct libc_mq *ptr);
-
-#define MSGQ_PREFIX "/dev/shm/__MSGQ__"
-
diff --git a/newlib/libc/sys/linux/msize.c b/newlib/libc/sys/linux/msize.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/msize.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/msizer.c b/newlib/libc/sys/linux/msizer.c
deleted file mode 100644
index 7b7905389..000000000
--- a/newlib/libc/sys/linux/msizer.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-size_t 
-_malloc_usable_size_r (struct _reent *ptr, void *mem)
-{
-  return malloc_usable_size (mem);
-}
diff --git a/newlib/libc/sys/linux/mstats.c b/newlib/libc/sys/linux/mstats.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/mstats.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/mtrim.c b/newlib/libc/sys/linux/mtrim.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/mtrim.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/mtrimr.c b/newlib/libc/sys/linux/mtrimr.c
deleted file mode 100644
index 3b2fbf367..000000000
--- a/newlib/libc/sys/linux/mtrimr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void *
-_malloc_trim_r (struct _reent *ptr, size_t pad)
-{
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/net/Makefile.am b/newlib/libc/sys/linux/net/Makefile.am
deleted file mode 100644
index 5e31f0f59..000000000
--- a/newlib/libc/sys/linux/net/Makefile.am
+++ /dev/null
@@ -1,87 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = addr2ascii.c ascii2addr.c base64.c bindresvport.c ether_addr.c getaddrinfo.c \
-	gethostbydns.c gethostbyht.c gethostbynis.c gethostnamadr.c \
-	getifaddrs.c getnameinfo.c \
-	getnetbydns.c getnetbyht.c getnetbynis.c getnetnamadr.c \
-	getproto.c getprotoent.c getprotoname.c getservbyname.c \
-	getservbyport.c getservent.c herror.c hesiod.c inet_addr.c \
-	ifname.c inet_lnaof.c \
-	inet_makeaddr.c inet_net_ntop.c inet_net_pton.c inet_neta.c \
-	inet_netof.c inet_network.c inet_ntoa.c inet_ntop.c \
-	inet_pton.c innetgr-stub.c ip6opt.c issetugid-stub.c \
-        linkaddr.c map_v4v6.c namespace.h un-namespace.h \
-	name6.c ns_addr.c \
-	ns_name.c ns_netint.c \
-	ns_ntoa.c ns_parse.c ns_print.c ns_ttl.c \
-	nsdispatch.c nslexer.c nsparser.c nsparser.h \
-	nsap_addr.c res_comp.c res_data.c res_debug.c \
-	res_init.c res_mkquery.c res_mkupdate.c res_query.c \
-	res_send.c res_update.c rthdr.c vars.c
-
-ELIX_4_OBJS = \
-	rcmd.$(oext) \
-	rcmdsh.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS =
-else
-if ELIX_LEVEL_3
-LIB_OBJS =
-else
-LIB_OBJS = $(ELIX_4_OBJS)
-endif
-endif
-endif
-
-libnet_la_LDFLAGS = -Xcompiler -nostdlib
-libnet_la_CFLAGS = -DINET6
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libnet.la
-libnet_la_SOURCES = $(LIB_SOURCES)
-libnet_la_LIBADD = $(LIB_OBJS)
-libnet_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../../Makefile.shared
-
-install-data-local:
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/arpa; \
-	for i in $(srcdir)/../include/arpa/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/arpa/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/net; \
-	for i in $(srcdir)/../include/net/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/net/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet; \
-	for i in $(srcdir)/../include/netinet/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet6; \
-	for i in $(srcdir)/../include/netinet6/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet6/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netns; \
-	for i in $(srcdir)/../include/netns/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netns/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/rpc; \
-	for i in $(srcdir)/../include/rpc/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/rpc/`basename $$i`; \
-	done; \
diff --git a/newlib/libc/sys/linux/net/Makefile.in b/newlib/libc/sys/linux/net/Makefile.in
deleted file mode 100644
index 021a7c4b1..000000000
--- a/newlib/libc/sys/linux/net/Makefile.in
+++ /dev/null
@@ -1,466 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-EXTRA_SUBDIRS = @EXTRA_SUBDIRS@
-EXTRA_SUBLIBS = @EXTRA_SUBLIBS@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../include $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = addr2ascii.c ascii2addr.c base64.c bindresvport.c ether_addr.c getaddrinfo.c \
-	gethostbydns.c gethostbyht.c gethostbynis.c gethostnamadr.c \
-	getifaddrs.c getnameinfo.c \
-	getnetbydns.c getnetbyht.c getnetbynis.c getnetnamadr.c \
-	getproto.c getprotoent.c getprotoname.c getservbyname.c \
-	getservbyport.c getservent.c herror.c hesiod.c inet_addr.c \
-	ifname.c inet_lnaof.c \
-	inet_makeaddr.c inet_net_ntop.c inet_net_pton.c inet_neta.c \
-	inet_netof.c inet_network.c inet_ntoa.c inet_ntop.c \
-	inet_pton.c innetgr-stub.c ip6opt.c issetugid-stub.c \
-        linkaddr.c map_v4v6.c namespace.h un-namespace.h \
-	name6.c ns_addr.c \
-	ns_name.c ns_netint.c \
-	ns_ntoa.c ns_parse.c ns_print.c ns_ttl.c \
-	nsdispatch.c nslexer.c nsparser.c nsparser.h \
-	nsap_addr.c res_comp.c res_data.c res_debug.c \
-	res_init.c res_mkquery.c res_mkupdate.c res_query.c \
-	res_send.c res_update.c rthdr.c vars.c
-
-
-ELIX_4_OBJS = \
-	rcmd.$(oext) \
-	rcmdsh.$(oext)
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@$(ELIX_4_OBJS)
-
-libnet_la_LDFLAGS = -Xcompiler -nostdlib
-libnet_la_CFLAGS = -DINET6
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libnet.la
-@USE_LIBTOOL_TRUE@libnet_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@libnet_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libnet_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  addr2ascii.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ascii2addr.$(OBJEXT) base64.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@bindresvport.$(OBJEXT) ether_addr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getaddrinfo.$(OBJEXT) gethostbydns.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gethostbyht.$(OBJEXT) gethostbynis.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gethostnamadr.$(OBJEXT) getifaddrs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getnameinfo.$(OBJEXT) getnetbydns.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getnetbyht.$(OBJEXT) getnetbynis.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getnetnamadr.$(OBJEXT) getproto.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getprotoent.$(OBJEXT) getprotoname.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getservbyname.$(OBJEXT) getservbyport.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@getservent.$(OBJEXT) herror.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@hesiod.$(OBJEXT) inet_addr.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ifname.$(OBJEXT) inet_lnaof.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@inet_makeaddr.$(OBJEXT) inet_net_ntop.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@inet_net_pton.$(OBJEXT) inet_neta.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@inet_netof.$(OBJEXT) inet_network.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@inet_ntoa.$(OBJEXT) inet_ntop.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@inet_pton.$(OBJEXT) innetgr-stub.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ip6opt.$(OBJEXT) issetugid-stub.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@linkaddr.$(OBJEXT) map_v4v6.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@name6.$(OBJEXT) ns_addr.$(OBJEXT) ns_name.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ns_netint.$(OBJEXT) ns_ntoa.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ns_parse.$(OBJEXT) ns_print.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ns_ttl.$(OBJEXT) nsdispatch.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@nslexer.$(OBJEXT) nsparser.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@nsap_addr.$(OBJEXT) res_comp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@res_data.$(OBJEXT) res_debug.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@res_init.$(OBJEXT) res_mkquery.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@res_mkupdate.$(OBJEXT) res_query.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@res_send.$(OBJEXT) res_update.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@rthdr.$(OBJEXT) vars.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libnet_la_OBJECTS =  addr2ascii.lo ascii2addr.lo \
-@USE_LIBTOOL_TRUE@base64.lo bindresvport.lo ether_addr.lo \
-@USE_LIBTOOL_TRUE@getaddrinfo.lo gethostbydns.lo gethostbyht.lo \
-@USE_LIBTOOL_TRUE@gethostbynis.lo gethostnamadr.lo getifaddrs.lo \
-@USE_LIBTOOL_TRUE@getnameinfo.lo getnetbydns.lo getnetbyht.lo \
-@USE_LIBTOOL_TRUE@getnetbynis.lo getnetnamadr.lo getproto.lo \
-@USE_LIBTOOL_TRUE@getprotoent.lo getprotoname.lo getservbyname.lo \
-@USE_LIBTOOL_TRUE@getservbyport.lo getservent.lo herror.lo hesiod.lo \
-@USE_LIBTOOL_TRUE@inet_addr.lo ifname.lo inet_lnaof.lo inet_makeaddr.lo \
-@USE_LIBTOOL_TRUE@inet_net_ntop.lo inet_net_pton.lo inet_neta.lo \
-@USE_LIBTOOL_TRUE@inet_netof.lo inet_network.lo inet_ntoa.lo \
-@USE_LIBTOOL_TRUE@inet_ntop.lo inet_pton.lo innetgr-stub.lo ip6opt.lo \
-@USE_LIBTOOL_TRUE@issetugid-stub.lo linkaddr.lo map_v4v6.lo name6.lo \
-@USE_LIBTOOL_TRUE@ns_addr.lo ns_name.lo ns_netint.lo ns_ntoa.lo \
-@USE_LIBTOOL_TRUE@ns_parse.lo ns_print.lo ns_ttl.lo nsdispatch.lo \
-@USE_LIBTOOL_TRUE@nslexer.lo nsparser.lo nsap_addr.lo res_comp.lo \
-@USE_LIBTOOL_TRUE@res_data.lo res_debug.lo res_init.lo res_mkquery.lo \
-@USE_LIBTOOL_TRUE@res_mkupdate.lo res_query.lo res_send.lo \
-@USE_LIBTOOL_TRUE@res_update.lo rthdr.lo vars.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libnet_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libnet_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus net/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libnet.la: $(libnet_la_OBJECTS) $(libnet_la_DEPENDENCIES)
-	$(LINK)  $(libnet_la_LDFLAGS) $(libnet_la_OBJECTS) $(libnet_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = net
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am: install-data-local
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-local install-data-am \
-install-data install-am install uninstall-am uninstall all-redirect \
-all-am all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-install-data-local:
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/arpa; \
-	for i in $(srcdir)/../include/arpa/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/arpa/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/net; \
-	for i in $(srcdir)/../include/net/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/net/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet; \
-	for i in $(srcdir)/../include/netinet/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet6; \
-	for i in $(srcdir)/../include/netinet6/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet6/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netns; \
-	for i in $(srcdir)/../include/netns/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netns/`basename $$i`; \
-	done; \
-	$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/rpc; \
-	for i in $(srcdir)/../include/rpc/*.h; do \
-	  $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/rpc/`basename $$i`; \
-	done; \
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/net/addr2ascii.3 b/newlib/libc/sys/linux/net/addr2ascii.3
deleted file mode 100644
index 10b1ac7f9..000000000
--- a/newlib/libc/sys/linux/net/addr2ascii.3
+++ /dev/null
@@ -1,222 +0,0 @@
-.\"
-.\" Copyright 1996 Massachusetts Institute of Technology
-.\"
-.\" Permission to use, copy, modify, and distribute this software and
-.\" its documentation for any purpose and without fee is hereby
-.\" granted, provided that both the above copyright notice and this
-.\" permission notice appear in all copies, that both the above
-.\" copyright notice and this permission notice appear in all
-.\" supporting documentation, and that the name of M.I.T. not be used
-.\" in advertising or publicity pertaining to distribution of the
-.\" software without specific, written prior permission.  M.I.T. makes
-.\" no representations about the suitability of this software for any
-.\" purpose.  It is provided "as is" without express or implied
-.\" warranty.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''.  M.I.T. DISCLAIMS
-.\" ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
-.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
-.\" SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-.\" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-.\" LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-.\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"	$ANA: addr2ascii.3,v 1.1 1996/06/13 18:41:46 wollman Exp $
-.\" $FreeBSD: src/lib/libc/net/addr2ascii.3,v 1.12 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd June 13, 1996
-.Dt ADDR2ASCII 3
-.Os
-.Sh NAME
-.Nm addr2ascii ,
-.Nm ascii2addr
-.Nd Generic address formatting routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netinet/in.h
-.In arpa/inet.h
-.Ft "char *"
-.Fn addr2ascii "int af" "const void *addrp" "int len" "char *buf"
-.Ft int
-.Fn ascii2addr "int af" "const char *ascii" "void *result"
-.Sh DESCRIPTION
-The routines
-.Fn addr2ascii
-and
-.Fn ascii2addr
-are used to convert network addresses between binary form and a
-printable form appropriate to the address family.  Both functions take
-an
-.Fa af
-argument, specifying the address family to be used in the conversion
-process.
-(Currently, only the
-.Dv AF_INET
-and
-.Dv AF_LINK
-address families are supported.)
-.Pp
-The
-.Fn addr2ascii
-function
-is used to convert binary, network-format addresses into printable
-form.  In addition to
-.Fa af ,
-there are three other arguments.  The
-.Fa addrp
-argument is a pointer to the network address to be converted.
-The
-.Fa len
-argument is the length of the address.  The
-.Fa buf
-argument is an optional pointer to a caller-allocated buffer to hold
-the result; if a null pointer is passed,
-.Fn addr2ascii
-uses a statically-allocated buffer.
-.Pp
-The
-.Fn ascii2addr
-function performs the inverse operation to
-.Fn addr2ascii .
-In addition to
-.Fa af ,
-it takes two parameters,
-.Fa ascii
-and
-.Fa result .
-The
-.Fa ascii
-parameter is a pointer to the string which is to be converted into
-binary.  The
-.Fa result
-parameter is a pointer to an appropriate network address structure for
-the specified family.
-.Pp
-The following gives the appropriate structure to use for binary
-addresses in the specified family:
-.Pp
-.Bl -tag -width AF_INETxxxx -compact
-.It Dv AF_INET
-.Li struct in_addr
-(in
-.Aq Pa netinet/in.h )
-.It Dv AF_LINK
-.Li struct sockaddr_dl
-(in
-.Aq Pa net/if_dl.h )
-.\" .It Dv AF_INET6
-.\" .Li struct in6_addr
-.\" (in
-.\" .Aq Pa netinet6/in6.h )
-.El
-.Sh RETURN VALUES
-The
-.Fn addr2ascii
-function returns the address of the buffer it was passed, or a static
-buffer if the a null pointer was passed; on failure, it returns a null
-pointer.
-The
-.Fn ascii2addr
-function returns the length of the binary address in bytes, or -1 on
-failure.
-.Sh EXAMPLES
-The
-.Xr inet 3
-functions
-.Fn inet_ntoa
-and
-.Fn inet_aton
-could be implemented thusly:
-.Bd -literal -offset indent
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-char *
-inet_ntoa(struct in_addr addr)
-{
-	return addr2ascii(AF_INET, &addr, sizeof addr, 0);
-}
-
-int
-inet_aton(const char *ascii, struct in_addr *addr)
-{
-	return (ascii2addr(AF_INET, ascii, addr)
-	    == sizeof(*addr));
-}
-.Ed
-.Pp
-In actuality, this cannot be done because
-.Fn addr2ascii
-and
-.Fn ascii2addr
-are implemented in terms of the
-.Xr inet 3
-functions, rather than the other way around.
-.Sh ERRORS
-When a failure is returned,
-.Li errno
-is set to one of the following values:
-.Bl -tag -width Er
-.It Bq Er ENAMETOOLONG
-The
-.Fn addr2ascii
-routine was passed a
-.Fa len
-parameter which was inappropriate for the address family given by
-.Fa af .
-.It Bq Er EPROTONOSUPPORT
-Either routine was passed an
-.Fa af
-parameter other than
-.Dv AF_INET
-or
-.Dv AF_LINK .
-.It Bq Er EINVAL
-The string passed to
-.Fn ascii2addr
-was improperly formatted for address family
-.Fa af .
-.El
-.Sh SEE ALSO
-.Xr inet 3 ,
-.Xr linkaddr 3 ,
-.Xr inet 4
-.Sh HISTORY
-An interface close to this one was originally suggested by Craig
-Partridge.  This particular interface originally appeared in the
-.Tn INRIA
-.Tn IPv6
-implementation.
-.Sh AUTHORS
-Code and documentation by
-.An Garrett A. Wollman ,
-MIT Laboratory for Computer Science.
-.Sh BUGS
-The original implementations supported IPv6.  This support should
-eventually be resurrected.  The
-.Tn NRL
-implementation also included support for the
-.Dv AF_ISO
-and
-.Dv AF_NS
-address families.
-.Pp
-The genericity of this interface is somewhat questionable.  A truly
-generic interface would provide a means for determining the length of
-the buffer to be used so that it could be dynamically allocated, and
-would always require a
-.Dq Li "struct sockaddr"
-to hold the binary address.  Unfortunately, this is incompatible with existing
-practice.  This limitation means that a routine for printing network
-addresses from arbitrary address families must still have internal
-knowledge of the maximum buffer length needed and the appropriate part
-of the address to use as the binary address.
diff --git a/newlib/libc/sys/linux/net/addr2ascii.c b/newlib/libc/sys/linux/net/addr2ascii.c
deleted file mode 100644
index f095339cc..000000000
--- a/newlib/libc/sys/linux/net/addr2ascii.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 1996 Massachusetts Institute of Technology
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby
- * granted, provided that both the above copyright notice and this
- * permission notice appear in all copies, that both the above
- * copyright notice and this permission notice appear in all
- * supporting documentation, and that the name of M.I.T. not be used
- * in advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.  M.I.T. makes
- * no representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied
- * warranty.
- * 
- * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''.  M.I.T. DISCLAIMS
- * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
- * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	$ANA: addr2ascii.c,v 1.1 1996/06/13 18:41:46 wollman Exp $
- */
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <errno.h>
-#include <string.h>
-
-#include <net/if_dl.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-/*-
- * Convert a network address from binary to printable numeric format.
- * This API is copied from INRIA's IPv6 implementation, but it is a
- * bit bogus in two ways:
- *
- *	1) There is no value in passing both an address family and
- *	   an address length; either one should imply the other,
- *	   or we should be passing sockaddrs instead.
- *	2) There should by contrast be /added/ a length for the buffer
- *	   that we pass in, so that programmers are spared the need to
- *	   manually calculate (read: ``guess'') the maximum length.
- *
- * Flash: the API is also the same in the NRL implementation, and seems to
- * be some sort of standard, so we appear to be stuck with both the bad
- * naming and the poor choice of arguments.
- */
-char *
-addr2ascii(af, addrp, len, buf)
-	int af;
-	const void *addrp;
-	int len;		/* should be size_t XXX */
-	char *buf;		/* XXX should pass length of buffer */
-{
-	static char staticbuf[64]; /* 64 for AF_LINK > 16 for AF_INET */
-
-	if (!buf)
-		buf = staticbuf;
-
-	switch(af) {
-	case AF_INET:
-		if (len != sizeof(struct in_addr)) {
-			errno = ENAMETOOLONG;
-			return 0;
-		}
-		strcpy(buf, inet_ntoa(*(const struct in_addr *)addrp));
-		break;
-
-	default:
-		errno = EPROTONOSUPPORT;
-		return 0;
-	}
-	return buf;
-}
diff --git a/newlib/libc/sys/linux/net/ascii2addr.c b/newlib/libc/sys/linux/net/ascii2addr.c
deleted file mode 100644
index f69e029f8..000000000
--- a/newlib/libc/sys/linux/net/ascii2addr.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 1996 Massachusetts Institute of Technology
- *
- * Permission to use, copy, modify, and distribute this software and
- * its documentation for any purpose and without fee is hereby
- * granted, provided that both the above copyright notice and this
- * permission notice appear in all copies, that both the above
- * copyright notice and this permission notice appear in all
- * supporting documentation, and that the name of M.I.T. not be used
- * in advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.  M.I.T. makes
- * no representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied
- * warranty.
- * 
- * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''.  M.I.T. DISCLAIMS
- * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
- * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	$ANA: ascii2addr.c,v 1.2 1996/06/13 18:46:02 wollman Exp $
- */
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <errno.h>
-#include <string.h>
-
-#include <net/if_dl.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-int
-ascii2addr(af, ascii, result)
-	int af;
-	const char *ascii;
-	void *result;
-{
-	struct in_addr *ina;
-	char strbuf[4*sizeof("123")]; /* long enough for V4 only */
-
-	switch(af) {
-	case AF_INET:
-		ina = result;
-		strbuf[0] = '\0';
-		strncat(strbuf, ascii, (sizeof strbuf)-1);
-		if (inet_aton(strbuf, ina))
-			return sizeof(struct in_addr);
-		errno = EINVAL;
-		break;
-
-	default:
-		errno = EPROTONOSUPPORT;
-		break;
-	}
-
-	return -1;
-}
diff --git a/newlib/libc/sys/linux/net/base64.c b/newlib/libc/sys/linux/net/base64.c
deleted file mode 100644
index 35f7d867b..000000000
--- a/newlib/libc/sys/linux/net/base64.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Copyright (c) 1996, 1998 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1995 by International Business Machines, Inc.
- *
- * International Business Machines, Inc. (hereinafter called IBM) grants
- * permission under its copyrights to use, copy, modify, and distribute this
- * Software with or without fee, provided that the above copyright notice and
- * all paragraphs of this notice appear in all copies, and that the name of IBM
- * not be used in connection with the marketing of any product incorporating
- * the Software or modifications thereof, without specific, written prior
- * permission.
- *
- * To the extent it has a right to do so, IBM grants an immunity from suit
- * under its patents, if any, for the use, sale or manufacture of products to
- * the extent that such products are used for performing Domain Name System
- * dynamic updates in TCP/IP networks by means of the Software.  No immunity is
- * granted for any product per se or for any other function of any product.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL WARRANTIES,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE.  IN NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL,
- * DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE, EVEN
- * IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <ctype.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#define Assert(Cond) if (!(Cond)) abort()
-
-static const char Base64[] =
-	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
-static const char Pad64 = '=';
-
-/* (From RFC1521 and draft-ietf-dnssec-secext-03.txt)
-   The following encoding technique is taken from RFC 1521 by Borenstein
-   and Freed.  It is reproduced here in a slightly edited form for
-   convenience.
-
-   A 65-character subset of US-ASCII is used, enabling 6 bits to be
-   represented per printable character. (The extra 65th character, "=",
-   is used to signify a special processing function.)
-
-   The encoding process represents 24-bit groups of input bits as output
-   strings of 4 encoded characters. Proceeding from left to right, a
-   24-bit input group is formed by concatenating 3 8-bit input groups.
-   These 24 bits are then treated as 4 concatenated 6-bit groups, each
-   of which is translated into a single digit in the base64 alphabet.
-
-   Each 6-bit group is used as an index into an array of 64 printable
-   characters. The character referenced by the index is placed in the
-   output string.
-
-                         Table 1: The Base64 Alphabet
-
-      Value Encoding  Value Encoding  Value Encoding  Value Encoding
-          0 A            17 R            34 i            51 z
-          1 B            18 S            35 j            52 0
-          2 C            19 T            36 k            53 1
-          3 D            20 U            37 l            54 2
-          4 E            21 V            38 m            55 3
-          5 F            22 W            39 n            56 4
-          6 G            23 X            40 o            57 5
-          7 H            24 Y            41 p            58 6
-          8 I            25 Z            42 q            59 7
-          9 J            26 a            43 r            60 8
-         10 K            27 b            44 s            61 9
-         11 L            28 c            45 t            62 +
-         12 M            29 d            46 u            63 /
-         13 N            30 e            47 v
-         14 O            31 f            48 w         (pad) =
-         15 P            32 g            49 x
-         16 Q            33 h            50 y
-
-   Special processing is performed if fewer than 24 bits are available
-   at the end of the data being encoded.  A full encoding quantum is
-   always completed at the end of a quantity.  When fewer than 24 input
-   bits are available in an input group, zero bits are added (on the
-   right) to form an integral number of 6-bit groups.  Padding at the
-   end of the data is performed using the '=' character.
-
-   Since all base64 input is an integral number of octets, only the
-         -------------------------------------------------                       
-   following cases can arise:
-   
-       (1) the final quantum of encoding input is an integral
-           multiple of 24 bits; here, the final unit of encoded
-	   output will be an integral multiple of 4 characters
-	   with no "=" padding,
-       (2) the final quantum of encoding input is exactly 8 bits;
-           here, the final unit of encoded output will be two
-	   characters followed by two "=" padding characters, or
-       (3) the final quantum of encoding input is exactly 16 bits;
-           here, the final unit of encoded output will be three
-	   characters followed by one "=" padding character.
-   */
-
-int
-b64_ntop(u_char const *src, size_t srclength, char *target, size_t targsize) {
-	size_t datalength = 0;
-	u_char input[3];
-	u_char output[4];
-	size_t i;
-
-	while (2 < srclength) {
-		input[0] = *src++;
-		input[1] = *src++;
-		input[2] = *src++;
-		srclength -= 3;
-
-		output[0] = input[0] >> 2;
-		output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4);
-		output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6);
-		output[3] = input[2] & 0x3f;
-		Assert(output[0] < 64);
-		Assert(output[1] < 64);
-		Assert(output[2] < 64);
-		Assert(output[3] < 64);
-
-		if (datalength + 4 > targsize)
-			return (-1);
-		target[datalength++] = Base64[output[0]];
-		target[datalength++] = Base64[output[1]];
-		target[datalength++] = Base64[output[2]];
-		target[datalength++] = Base64[output[3]];
-	}
-    
-	/* Now we worry about padding. */
-	if (0 != srclength) {
-		/* Get what's left. */
-		input[0] = input[1] = input[2] = '\0';
-		for (i = 0; i < srclength; i++)
-			input[i] = *src++;
-	
-		output[0] = input[0] >> 2;
-		output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4);
-		output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6);
-		Assert(output[0] < 64);
-		Assert(output[1] < 64);
-		Assert(output[2] < 64);
-
-		if (datalength + 4 > targsize)
-			return (-1);
-		target[datalength++] = Base64[output[0]];
-		target[datalength++] = Base64[output[1]];
-		if (srclength == 1)
-			target[datalength++] = Pad64;
-		else
-			target[datalength++] = Base64[output[2]];
-		target[datalength++] = Pad64;
-	}
-	if (datalength >= targsize)
-		return (-1);
-	target[datalength] = '\0';	/* Returned value doesn't count \0. */
-	return (datalength);
-}
-
-/* skips all whitespace anywhere.
-   converts characters, four at a time, starting at (or after)
-   src from base - 64 numbers into three 8 bit bytes in the target area.
-   it returns the number of data bytes stored at the target, or -1 on error.
- */
-
-int
-b64_pton(src, target, targsize)
-	char const *src;
-	u_char *target;
-	size_t targsize;
-{
-	int tarindex, state, ch;
-	char *pos;
-
-	state = 0;
-	tarindex = 0;
-
-	while ((ch = *src++) != '\0') {
-		if (isspace((unsigned char)ch))        /* Skip whitespace anywhere. */
-			continue;
-
-		if (ch == Pad64)
-			break;
-
-		pos = strchr(Base64, ch);
-		if (pos == 0) 		/* A non-base64 character. */
-			return (-1);
-
-		switch (state) {
-		case 0:
-			if (target) {
-				if ((size_t)tarindex >= targsize)
-					return (-1);
-				target[tarindex] = (pos - Base64) << 2;
-			}
-			state = 1;
-			break;
-		case 1:
-			if (target) {
-				if ((size_t)tarindex + 1 >= targsize)
-					return (-1);
-				target[tarindex]   |=  (pos - Base64) >> 4;
-				target[tarindex+1]  = ((pos - Base64) & 0x0f)
-							<< 4 ;
-			}
-			tarindex++;
-			state = 2;
-			break;
-		case 2:
-			if (target) {
-				if ((size_t)tarindex + 1 >= targsize)
-					return (-1);
-				target[tarindex]   |=  (pos - Base64) >> 2;
-				target[tarindex+1]  = ((pos - Base64) & 0x03)
-							<< 6;
-			}
-			tarindex++;
-			state = 3;
-			break;
-		case 3:
-			if (target) {
-				if ((size_t)tarindex >= targsize)
-					return (-1);
-				target[tarindex] |= (pos - Base64);
-			}
-			tarindex++;
-			state = 0;
-			break;
-		default:
-			abort();
-		}
-	}
-
-	/*
-	 * We are done decoding Base-64 chars.  Let's see if we ended
-	 * on a byte boundary, and/or with erroneous trailing characters.
-	 */
-
-	if (ch == Pad64) {		/* We got a pad char. */
-		ch = *src++;		/* Skip it, get next. */
-		switch (state) {
-		case 0:		/* Invalid = in first position */
-		case 1:		/* Invalid = in second position */
-			return (-1);
-
-		case 2:		/* Valid, means one byte of info */
-			/* Skip any number of spaces. */
-			for ((void)NULL; ch != '\0'; ch = *src++)
-				if (!isspace((unsigned char)ch))
-					break;
-			/* Make sure there is another trailing = sign. */
-			if (ch != Pad64)
-				return (-1);
-			ch = *src++;		/* Skip the = */
-			/* Fall through to "single trailing =" case. */
-			/* FALLTHROUGH */
-
-		case 3:		/* Valid, means two bytes of info */
-			/*
-			 * We know this char is an =.  Is there anything but
-			 * whitespace after it?
-			 */
-			for ((void)NULL; ch != '\0'; ch = *src++)
-				if (!isspace((unsigned char)ch))
-					return (-1);
-
-			/*
-			 * Now make sure for cases 2 and 3 that the "extra"
-			 * bits that slopped past the last full byte were
-			 * zeros.  If we don't check them, they become a
-			 * subliminal channel.
-			 */
-			if (target && target[tarindex] != 0)
-				return (-1);
-		}
-	} else {
-		/*
-		 * We ended by seeing the end of the string.  Make sure we
-		 * have no partial bytes lying around.
-		 */
-		if (state != 0)
-			return (-1);
-	}
-
-	return (tarindex);
-}
diff --git a/newlib/libc/sys/linux/net/bindresvport.c b/newlib/libc/sys/linux/net/bindresvport.c
deleted file mode 100644
index 7b595b4dc..000000000
--- a/newlib/libc/sys/linux/net/bindresvport.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*	$NetBSD: bindresvport.c,v 1.19 2000/07/06 03:03:59 christos Exp $	*/
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-/*static char *sccsid = "from: @(#)bindresvport.c 1.8 88/02/08 SMI";*/
-/*static char *sccsid = "from: @(#)bindresvport.c	2.2 88/07/29 4.0 RPCSRC";*/
-/*from: OpenBSD: bindresvport.c,v 1.7 1996/07/30 16:25:47 downsj Exp */
-#endif
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/*
- * Copyright (c) 1987 by Sun Microsystems, Inc.
- *
- * Portions Copyright(C) 1996, Jason Downs.  All rights reserved.
- */
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-
-#include <rpc/rpc.h>
-
-#include <string.h>
-#include "un-namespace.h"
-
-/*
- * Bind a socket to a privileged IP port
- */
-int
-bindresvport(sd, sin)
-	int sd;
-	struct sockaddr_in *sin;
-{
-	return bindresvport_sa(sd, (struct sockaddr *)sin);
-}
-
-/*
- * Bind a socket to a privileged IP port
- */
-int
-bindresvport_sa(sd, sa)
-	int sd;
-	struct sockaddr *sa;
-{
-	int old, error, af;
-	struct sockaddr_storage myaddr;
-	struct sockaddr_in *sin;
-#ifdef INET6
-	struct sockaddr_in6 *sin6;
-#endif
-	int proto, portrange, portlow;
-	u_int16_t *portp;
-	socklen_t salen;
-
-	if (sa == NULL) {
-		salen = sizeof(myaddr);
-		sa = (struct sockaddr *)&myaddr;
-
-		if (getsockname(sd, sa, &salen) == -1)
-			return -1;	/* errno is correctly set */
-
-		af = sa->sa_family;
-		memset(sa, 0, salen);
-	} else
-		af = sa->sa_family;
-
-	switch (af) {
-	case AF_INET:
-		proto = IPPROTO_IP;
-		portrange = IP_PORTRANGE;
-		portlow = IP_PORTRANGE_LOW;
-		sin = (struct sockaddr_in *)sa;
-		salen = sizeof(struct sockaddr_in);
-		portp = &sin->sin_port;
-		break;
-#ifdef INET6
-	case AF_INET6:
-		proto = IPPROTO_IPV6;
-		portrange = IPV6_PORTRANGE;
-		portlow = IPV6_PORTRANGE_LOW;
-		sin6 = (struct sockaddr_in6 *)sa;
-		salen = sizeof(struct sockaddr_in6);
-		portp = &sin6->sin6_port;
-		break;
-#endif
-	default:
-		errno = EPFNOSUPPORT;
-		return (-1);
-	}
-	sa->sa_family = af;
-
-	if (*portp == 0) {
-		socklen_t oldlen = sizeof(old);
-
-		error = getsockopt(sd, proto, portrange, &old, &oldlen);
-		if (error < 0)
-			return (error);
-
-		error = setsockopt(sd, proto, portrange, &portlow,
-		    sizeof(portlow));
-		if (error < 0)
-			return (error);
-	}
-
-	error = bind(sd, sa, salen);
-
-	if (*portp == 0) {
-		int saved_errno = errno;
-
-		if (error < 0) {
-			if (setsockopt(sd, proto, portrange, &old,
-			    sizeof(old)) < 0)
-				errno = saved_errno;
-			return (error);
-		}
-
-		if (sa != (struct sockaddr *)&myaddr) {
-			/* Hmm, what did the kernel assign? */
-			if (getsockname(sd, sa, &salen) < 0)
-				errno = saved_errno;
-			return (error);
-		}
-	}
-	return (error);
-}
diff --git a/newlib/libc/sys/linux/net/byteorder.3 b/newlib/libc/sys/linux/net/byteorder.3
deleted file mode 100644
index 062ac9d70..000000000
--- a/newlib/libc/sys/linux/net/byteorder.3
+++ /dev/null
@@ -1,84 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)byteorder.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/byteorder.3,v 1.9 2001/12/08 19:06:23 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt BYTEORDER 3
-.Os
-.Sh NAME
-.Nm htonl ,
-.Nm htons ,
-.Nm ntohl ,
-.Nm ntohs
-.Nd convert values between host and network byte order
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In arpa/inet.h
-.Ft uint32_t
-.Fn htonl "uint32_t hostlong"
-.Ft uint16_t
-.Fn htons "uint16_t hostshort"
-.Ft uint32_t
-.Fn ntohl "uint32_t netlong"
-.Ft uint16_t
-.Fn ntohs "uint16_t netshort"
-.Sh DESCRIPTION
-These routines convert 16 and 32 bit quantities between network
-byte order and host byte order.
-On machines which have a byte order which is the same as the network
-order, routines are defined as null macros.
-.Pp
-These routines are most often used in conjunction with Internet
-addresses and ports as returned by
-.Xr gethostbyname 3
-and
-.Xr getservent 3 .
-.Sh SEE ALSO
-.Xr gethostbyname 3 ,
-.Xr getservent 3
-.Sh STANDARDS
-The
-.Nm byteorder
-functions are expected to conform with
-.St -p1003.1-2001 .
-.Sh HISTORY
-The
-.Nm byteorder
-functions appeared in
-.Bx 4.2 .
-.Sh BUGS
-On the
-.Tn VAX
-bytes are handled backwards from most everyone else in
-the world.  This is not expected to be fixed in the near future.
diff --git a/newlib/libc/sys/linux/net/ether_addr.c b/newlib/libc/sys/linux/net/ether_addr.c
deleted file mode 100644
index 7d2b19f69..000000000
--- a/newlib/libc/sys/linux/net/ether_addr.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (c) 1995
- *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Bill Paul.
- * 4. Neither the name of the author nor the names of any co-contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * ethernet address conversion and lookup routines
- *
- * Written by Bill Paul <wpaul@ctr.columbia.edu>
- * Center for Telecommunications Research
- * Columbia University, New York City
- */
-
-#include <sys/cdefs.h>
-
-#include <stdio.h>
-#include <paths.h>
-#include <sys/types.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <net/ethernet.h>
-#ifdef YP
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-#endif
-
-#ifndef _PATH_ETHERS
-#define _PATH_ETHERS "/etc/ethers"
-#endif
-
-/*
- * Parse a string of text containing an ethernet address and hostname
- * and separate it into its component parts.
- */
-int
-ether_line(l, e, hostname)
-	const char *l;
-	struct ether_addr *e;
-	char *hostname;
-{
-        int i, o[6];
-
-        i = sscanf(l, "%x:%x:%x:%x:%x:%x %s", &o[0], &o[1], &o[2],
-                                              &o[3], &o[4], &o[5],
-					      hostname);
-	if (i != 7)
-                return (i);
-
-        for (i=0; i<6; i++)
-                e->octet[i] = o[i];
-        return (0);
-}
-
-/*
- * Convert an ASCII representation of an ethernet address to
- * binary form.
- */
-struct
-ether_addr *ether_aton(a)
-	const char *a;
-{
-        int i;
-	static struct ether_addr o;
-	unsigned int o0, o1, o2, o3, o4, o5;
-
-        i = sscanf(a, "%x:%x:%x:%x:%x:%x", &o0, &o1, &o2, &o3, &o4, &o5);
-
-        if (i != 6)
-                return (NULL);
-
-        o.octet[0]=o0;
-	o.octet[1]=o1;
-	o.octet[2]=o2;
-	o.octet[3]=o3;
-	o.octet[4]=o4;
-	o.octet[5]=o5;
-
-        return ((struct ether_addr *)&o);
-}
-
-/*
- * Convert a binary representation of an ethernet address to
- * an ASCII string.
- */
-char
-*ether_ntoa(n)
-	const struct ether_addr *n;
-{
-        int i;
-	static char a[18];
-
-        i = sprintf(a, "%02x:%02x:%02x:%02x:%02x:%02x",
-	    n->octet[0], n->octet[1], n->octet[2],
-	    n->octet[3], n->octet[4], n->octet[5]);
-        if (i < 17)
-                return (NULL);
-        return ((char *)&a);
-}
-
-/*
- * Map an ethernet address to a hostname. Use either /etc/ethers or
- * NIS/YP.
- */
-int
-ether_ntohost(hostname, e)
-	char *hostname;
-	const struct ether_addr *e;
-{
-	FILE *fp;
-	char buf[BUFSIZ + 2];
-	struct ether_addr local_ether;
-	char local_host[MAXHOSTNAMELEN];
-#ifdef YP
-	char *result;
-	int resultlen;
-	char *ether_a;
-	char *yp_domain;
-#endif
-	if ((fp = fopen(_PATH_ETHERS, "r")) == NULL)
-		return (1);
-
-	while (fgets(buf,BUFSIZ,fp)) {
-		if (buf[0] == '#')
-			continue;
-#ifdef YP
-		if (buf[0] == '+') {
-			if (yp_get_default_domain(&yp_domain))
-				continue;
-			ether_a = ether_ntoa(e);
-			if (yp_match(yp_domain, "ethers.byaddr", ether_a,
-				strlen(ether_a), &result, &resultlen)) {
-				continue;
-			}
-			strncpy(buf, result, resultlen);
-			buf[resultlen] = '\0';
-			free(result);
-		}
-#endif
-		if (!ether_line(buf, &local_ether, local_host)) {
-			if (!memcmp((char *)&local_ether.octet[0],
-				(char *)&e->octet[0], 6)) {
-			/* We have a match */
-				strcpy(hostname, local_host);
-				fclose(fp);
-				return(0);
-			}
-		}
-	}
-	fclose(fp);
-	return (1);
-}
-
-/*
- * Map a hostname to an ethernet address using /etc/ethers or
- * NIS/YP.
- */
-int
-ether_hostton(hostname, e)
-	const char *hostname;
-	struct ether_addr *e;
-{
-	FILE *fp;
-	char buf[BUFSIZ + 2];
-	struct ether_addr local_ether;
-	char local_host[MAXHOSTNAMELEN];
-#ifdef YP
-	char *result;
-	int resultlen;
-	char *yp_domain;
-#endif
-	if ((fp = fopen(_PATH_ETHERS, "r")) == NULL)
-		return (1);
-
-	while (fgets(buf,BUFSIZ,fp)) {
-		if (buf[0] == '#')
-			continue;
-#ifdef YP
-		if (buf[0] == '+') {
-			if (yp_get_default_domain(&yp_domain))
-				continue;
-			if (yp_match(yp_domain, "ethers.byname", hostname,
-				strlen(hostname), &result, &resultlen)) {
-				continue;
-			}
-			strncpy(buf, result, resultlen);
-			buf[resultlen] = '\0';
-			free(result);
-		}
-#endif
-		if (!ether_line(buf, &local_ether, local_host)) {
-			if (!strcmp(hostname, local_host)) {
-				/* We have a match */
-				bcopy((char *)&local_ether.octet[0],
-					(char *)&e->octet[0], 6);
-				fclose(fp);
-				return(0);
-			}
-		}
-	}
-	fclose(fp);
-	return (1);
-}
diff --git a/newlib/libc/sys/linux/net/ethers.3 b/newlib/libc/sys/linux/net/ethers.3
deleted file mode 100644
index 7b7866fd9..000000000
--- a/newlib/libc/sys/linux/net/ethers.3
+++ /dev/null
@@ -1,197 +0,0 @@
-.\" Copyright (c) 1995
-.\"	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Bill Paul.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/lib/libc/net/ethers.3,v 1.19 2002/01/14 16:59:00 ru Exp $
-.\"
-.Dd April 12, 1995
-.Dt ETHERS 3
-.Os
-.Sh NAME
-.Nm ethers ,
-.Nm ether_line ,
-.Nm ether_aton ,
-.Nm ether_ntoa ,
-.Nm ether_ntohost ,
-.Nm ether_hostton
-.Nd Ethernet address conversion and lookup routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In net/ethernet.h
-.Ft int
-.Fn ether_line "const char *l" "struct ether_addr *e" "char *hostname"
-.Ft struct ether_addr *
-.Fn ether_aton "const char *a"
-.Ft char *
-.Fn ether_ntoa "const struct ether_addr *n"
-.Ft int
-.Fn ether_ntohost "char *hostname" "const struct ether_addr *e"
-.Ft int
-.Fn ether_hostton "const char *hostname" "struct ether_addr *e"
-.Sh DESCRIPTION
-These functions operate on ethernet addresses using an
-.Ar ether_addr
-structure, which is defined in the header file
-.Aq Pa netinet/if_ether.h :
-.Bd -literal -offset indent
-/*
- * The number of bytes in an ethernet (MAC) address.
- */
-#define ETHER_ADDR_LEN		6
-
-/*
- * Structure of a 48-bit Ethernet address.
- */
-struct  ether_addr {
-        u_char octet[ETHER_ADDR_LEN];
-};
-.Ed
-.Pp
-The function
-.Fn ether_line
-scans
-.Ar l ,
-an
-.Tn ASCII
-string in
-.Xr ethers 5
-format and sets
-.Ar e
-to the ethernet address specified in the string and
-.Ar h
-to the hostname.
-This function is used to parse lines from
-.Pa /etc/ethers
-into their component parts.
-.Pp
-The
-.Fn ether_aton
-function converts an
-.Tn ASCII
-representation of an ethernet address into an
-.Ar ether_addr
-structure.
-Likewise,
-.Fn ether_ntoa
-converts an ethernet address specified as an
-.Ar ether_addr
-structure into an
-.Tn ASCII
-string.
-.Pp
-The
-.Fn ether_ntohost
-and
-.Fn ether_hostton
-functions map ethernet addresses to their corresponding hostnames
-as specified in the
-.Pa /etc/ethers
-database.
-.Fn ether_ntohost
-converts from ethernet address to hostname, and
-.Fn ether_hostton
-converts from hostname to ethernet address.
-.Sh RETURN VALUES
-.Fn ether_line
-returns zero on success and non-zero if it was unable to parse
-any part of the supplied line
-.Ar l .
-It returns the extracted ethernet address in the supplied
-.Ar ether_addr
-structure
-.Ar e
-and the hostname in the supplied string
-.Ar h .
-.Pp
-On success,
-.Fn ether_ntoa
-returns a pointer to a string containing an
-.Tn ASCII
-representation of an ethernet address.
-If it is unable to convert
-the supplied
-.Ar ether_addr
-structure, it returns a
-.Dv NULL
-pointer.
-Likewise,
-.Fn ether_aton
-returns a pointer to an
-.Ar ether_addr
-structure on success and a
-.Dv NULL
-pointer on failure.
-.Pp
-The
-.Fn ether_ntohost
-and
-.Fn ether_hostton
-functions both return zero on success or non-zero if they were
-unable to find a match in the
-.Pa /etc/ethers
-database.
-.Sh NOTES
-The user must insure that the hostname strings passed to the
-.Fn ether_line ,
-.Fn ether_ntohost
-and
-.Fn ether_hostton
-functions are large enough to contain the returned hostnames.
-.Sh NIS INTERACTION
-If the
-.Pa /etc/ethers
-contains a line with a single + in it, the
-.Fn ether_ntohost
-and
-.Fn ether_hostton
-functions will attempt to consult the NIS
-.Pa ethers.byname
-and
-.Pa ethers.byaddr
-maps in addition to the data in the
-.Pa /etc/ethers
-file.
-.Sh SEE ALSO
-.Xr ethers 5 ,
-.Xr yp 8
-.Sh BUGS
-The
-.Fn ether_aton
-and
-.Fn ether_ntoa
-functions returns values that are stored in static memory areas
-which may be overwritten the next time they are called.
-.Sh HISTORY
-This particular implementation of the
-.Nm
-library functions were written for and first appeared in
-.Fx 2.1 .
diff --git a/newlib/libc/sys/linux/net/getaddrinfo.3 b/newlib/libc/sys/linux/net/getaddrinfo.3
deleted file mode 100644
index eca8b03b2..000000000
--- a/newlib/libc/sys/linux/net/getaddrinfo.3
+++ /dev/null
@@ -1,620 +0,0 @@
-.\"	$FreeBSD: src/lib/libc/net/getaddrinfo.3,v 1.18 2002/04/19 04:46:20 suz Exp $
-.\"	$KAME: getaddrinfo.3,v 1.31 2001/08/05 18:19:38 itojun Exp $
-.\"
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)gethostbyname.3	8.4 (Berkeley) 5/25/95
-.\"
-.Dd May 25, 1995
-.Dt GETADDRINFO 3
-.Os
-.\"
-.Sh NAME
-.Nm getaddrinfo ,
-.Nm freeaddrinfo ,
-.Nm gai_strerror
-.Nd nodename-to-address translation in protocol-independent manner
-.\"
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In netdb.h
-.Ft int
-.Fn getaddrinfo "const char *nodename" "const char *servname" \
-"const struct addrinfo *hints" "struct addrinfo **res"
-.Ft void
-.Fn freeaddrinfo "struct addrinfo *ai"
-.Ft "char *"
-.Fn gai_strerror "int ecode"
-.\"
-.Sh DESCRIPTION
-The
-.Fn getaddrinfo
-function is defined for protocol-independent nodename-to-address translation.
-It performs the functionality of
-.Xr gethostbyname 3
-and
-.Xr getservbyname 3 ,
-but in a more sophisticated manner.
-.Pp
-The
-.Li addrinfo
-structure is defined as a result of including the
-.Aq Pa netdb.h
-header:
-.Bd -literal -offset
-struct addrinfo {
-     int     ai_flags;     /* AI_PASSIVE, AI_CANONNAME, AI_NUMERICHOST */
-     int     ai_family;    /* PF_xxx */
-     int     ai_socktype;  /* SOCK_xxx */
-     int     ai_protocol;  /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
-     size_t  ai_addrlen;   /* length of ai_addr */
-     char   *ai_canonname; /* canonical name for nodename */
-     struct sockaddr  *ai_addr; /* binary address */
-     struct addrinfo  *ai_next; /* next structure in linked list */
-};
-.Ed
-.Pp
-The
-.Fa nodename
-and
-.Fa servname
-arguments are pointers to null-terminated strings or
-.Dv NULL .
-One or both of these two arguments must be a
-.Pf non Dv -NULL
-pointer.
-In the normal client scenario, both the
-.Fa nodename
-and
-.Fa servname
-are specified.
-In the normal server scenario, only the
-.Fa servname
-is specified.
-A
-.Pf non Dv -NULL
-.Fa nodename
-string can be either a node name or a numeric host address string
-(i.e., a dotted-decimal IPv4 address or an IPv6 hex address).
-A
-.Pf non Dv -NULL
-.Fa servname
-string can be either a service name or a decimal port number.
-.Pp
-The caller can optionally pass an
-.Li addrinfo
-structure, pointed to by the third argument,
-to provide hints concerning the type of socket that the caller supports.
-In this
-.Fa hints
-structure all members other than
-.Fa ai_flags ,
-.Fa ai_family ,
-.Fa ai_socktype ,
-and
-.Fa ai_protocol
-must be zero or a
-.Dv NULL
-pointer.
-A value of
-.Dv PF_UNSPEC
-for
-.Fa ai_family
-means the caller will accept any protocol family.
-A value of 0 for
-.Fa ai_socktype
-means the caller will accept any socket type.
-A value of 0 for
-.Fa ai_protocol
-means the caller will accept any protocol.
-For example, if the caller handles only TCP and not UDP, then the
-.Fa ai_socktype
-member of the hints structure should be set to
-.Dv SOCK_STREAM
-when
-.Fn getaddrinfo
-is called.
-If the caller handles only IPv4 and not IPv6, then the
-.Fa ai_family
-member of the
-.Fa hints
-structure should be set to
-.Dv PF_INET
-when
-.Fn getaddrinfo
-is called.
-If the third argument to
-.Fn getaddrinfo
-is a
-.Dv NULL
-pointer, this is the same as if the caller had filled in an
-.Li addrinfo
-structure initialized to zero with
-.Fa ai_family
-set to
-.Dv PF_UNSPEC .
-.Pp
-Upon successful return a pointer to a linked list of one or more
-.Li addrinfo
-structures is returned through the final argument.
-The caller can process each
-.Li addrinfo
-structure in this list by following the
-.Fa ai_next
-pointer, until a
-.Dv NULL
-pointer is encountered.
-In each returned
-.Li addrinfo
-structure the three members
-.Fa ai_family ,
-.Fa ai_socktype ,
-and
-.Fa ai_protocol
-are the corresponding arguments for a call to the
-.Fn socket
-function.
-In each
-.Li addrinfo
-structure the
-.Fa ai_addr
-member points to a filled-in socket address structure whose length is
-specified by the
-.Fa ai_addrlen
-member.
-.Pp
-If the
-.Dv AI_PASSIVE
-bit is set in the
-.Fa ai_flags
-member of the
-.Fa hints
-structure, then the caller plans to use the returned socket address
-structure in a call to
-.Fn bind .
-In this case, if the
-.Fa nodename
-argument is a
-.Dv NULL
-pointer, then the IP address portion of the socket
-address structure will be set to
-.Dv INADDR_ANY
-for an IPv4 address or
-.Dv IN6ADDR_ANY_INIT
-for an IPv6 address.
-.Pp
-If the
-.Dv AI_PASSIVE
-bit is not set in the
-.Fa ai_flags
-member of the
-.Fa hints
-structure, then the returned socket address structure will be ready for a
-call to
-.Fn connect
-(for a connection-oriented protocol)
-or either
-.Fn connect ,
-.Fn sendto ,
-or
-.Fn sendmsg
-(for a connectionless protocol).
-In this case, if the
-.Fa nodename
-argument is a
-.Dv NULL
-pointer, then the IP address portion of the
-socket address structure will be set to the loopback address.
-.Pp
-If the
-.Dv AI_CANONNAME
-bit is set in the
-.Fa ai_flags
-member of the
-.Fa hints
-structure, then upon successful return the
-.Fa ai_canonname
-member of the first
-.Li addrinfo
-structure in the linked list will point to a null-terminated string
-containing the canonical name of the specified
-.Fa nodename .
-.Pp
-If the
-.Dv AI_NUMERICHOST
-bit is set in the
-.Fa ai_flags
-member of the
-.Fa hints
-structure, then a
-.Pf non Dv -NULL
-.Fa nodename
-string must be a numeric host address string.
-Otherwise an error of
-.Dv EAI_NONAME
-is returned.
-This flag prevents any type of name resolution service (e.g., the DNS)
-from being called.
-.Pp
-The arguments to
-.Fn getaddrinfo
-must be sufficiently consistent and unambiguous.
-Here are some problem cases you may encounter:
-.Bl -bullet
-.It
-.Fn getaddrinfo
-will fail if the members in the
-.Fa hints
-structure are not consistent.
-For example, for internet address families,
-.Fn getaddrinfo
-will fail if you specify
-.Dv SOCK_STREAM
-to
-.Fa ai_socktype
-while you specify
-.Dv IPPROTO_UDP
-to
-.Fa ai_protocol .
-.It
-If you specify a
-.Fa servname
-which is defined only for certain
-.Fa ai_socktype ,
-.Fn getaddrinfo
-will fail because the arguments are not consistent.
-For example,
-.Fn getaddrinfo
-will return an error if you ask for
-.Dq Li tftp
-service on
-.Dv SOCK_STREAM .
-.It
-For internet address families, if you specify
-.Fa servname
-while you set
-.Fa ai_socktype
-to
-.Dv SOCK_RAW ,
-.Fn getaddrinfo
-will fail, because service names are not defined for the internet
-.Dv SOCK_RAW
-space.
-.It
-If you specify numeric
-.Fa servname ,
-while leaving
-.Fa ai_socktype
-and
-.Fa ai_protocol
-unspecified,
-.Fn getaddrinfo
-will fail.
-This is because the numeric
-.Fa servname
-does not identify any socket type, and
-.Fn getaddrinfo
-is not allowed to glob the argument in such case.
-.El
-.Pp
-All of the information returned by
-.Fn getaddrinfo
-is dynamically allocated:
-the
-.Li addrinfo
-structures, the socket address structures, and canonical node name
-strings pointed to by the addrinfo structures.
-To return this information to the system the function
-.Fn freeaddrinfo
-is called.
-The
-.Fa addrinfo
-structure pointed to by the
-.Fa ai argument
-is freed, along with any dynamic storage pointed to by the structure.
-This operation is repeated until a
-.Dv NULL
-.Fa ai_next
-pointer is encountered.
-.Pp
-To aid applications in printing error messages based on the
-.Dv EAI_xxx
-codes returned by
-.Fn getaddrinfo ,
-.Fn gai_strerror
-is defined.
-The argument is one of the
-.Dv EAI_xxx
-values defined earlier and the return value points to a string describing
-the error.
-If the argument is not one of the
-.Dv EAI_xxx
-values, the function still returns a pointer to a string whose contents
-indicate an unknown error.
-.\"
-.Sh EXTENSIONS
-This implementation supports numeric IPv6 address notation with the
-experimental scope identifier.
-By appending a percent sign and scope identifier to the address, you
-can specify the value of the
-.Li sin6_scope_id
-field of the socket address.
-This makes management of scoped address easier,
-and allows cut-and-paste input of scoped addresses.
-.Pp
-At the moment the code supports only link-local addresses in this format.
-The scope identifier is hardcoded to name of hardware interface associated
-with the link,
-(such as
-.Li ne0 ) .
-For example,
-.Dq Li fe80::1%ne0 ,
-which means
-.Do
-.Li fe80::1
-on the link associated with the
-.Li ne0
-interface
-.Dc .
-.Pp
-This implementation is still very experimental and non-standard.
-The current implementation assumes a one-to-one relationship between
-interfaces and links, which is not necessarily true according to the
-specification.
-.\"
-.Sh EXAMPLES
-The following code tries to connect to
-.Dq Li www.kame.net
-service
-.Dq Li http .
-via stream socket.
-It loops through all the addresses available, regardless of the address family.
-If the destination resolves to an IPv4 address, it will use an
-.Dv AF_INET
-socket.
-Similarly, if it resolves to IPv6, an
-.Dv AF_INET6
-socket is used.
-Observe that there is no hardcoded reference to particular address family.
-The code works even if
-.Fn getaddrinfo
-returns addresses that are not IPv4/v6.
-.Bd -literal -offset indent
-struct addrinfo hints, *res, *res0;
-int error;
-int s;
-const char *cause = NULL;
-
-memset(&hints, 0, sizeof(hints));
-hints.ai_family = PF_UNSPEC;
-hints.ai_socktype = SOCK_STREAM;
-error = getaddrinfo("www.kame.net", "http", &hints, &res0);
-if (error) {
-	errx(1, "%s", gai_strerror(error));
-	/*NOTREACHED*/
-}
-s = -1;
-cause = "no addresses";
-errno = EADDRNOTAVAIL;
-for (res = res0; res; res = res->ai_next) {
-	s = socket(res->ai_family, res->ai_socktype,
-	    res->ai_protocol);
-	if (s < 0) {
-		cause = "socket";
-		continue;
-	}
-
-	if (connect(s, res->ai_addr, res->ai_addrlen) < 0) {
-		cause = "connect";
-		close(s);
-		s = -1;
-		continue;
-	}
-
-	break;	/* okay we got one */
-}
-if (s < 0) {
-	err(1, cause);
-	/*NOTREACHED*/
-}
-freeaddrinfo(res0);
-.Ed
-.Pp
-The following example tries to open a wildcard listening socket onto service
-.Dq Li http ,
-for all the address families available.
-.Bd -literal -offset indent
-struct addrinfo hints, *res, *res0;
-int error;
-int s[MAXSOCK];
-int nsock;
-const char *cause = NULL;
-
-memset(&hints, 0, sizeof(hints));
-hints.ai_family = PF_UNSPEC;
-hints.ai_socktype = SOCK_STREAM;
-hints.ai_flags = AI_PASSIVE;
-error = getaddrinfo(NULL, "http", &hints, &res0);
-if (error) {
-	errx(1, "%s", gai_strerror(error));
-	/*NOTREACHED*/
-}
-nsock = 0;
-for (res = res0; res && nsock < MAXSOCK; res = res->ai_next) {
-	s[nsock] = socket(res->ai_family, res->ai_socktype,
-	    res->ai_protocol);
-	if (s[nsock] < 0) {
-		cause = "socket";
-		continue;
-	}
-
-	if (bind(s[nsock], res->ai_addr, res->ai_addrlen) < 0) {
-		cause = "bind";
-		close(s[nsock]);
-		continue;
-	}
-
-	if (listen(s[nsock], SOMAXCONN) < 0) {
-		cause = "listen";
-		close(s[nsock]);
-		continue;
-	}
-
-	nsock++;
-}
-if (nsock == 0) {
-	err(1, cause);
-	/*NOTREACHED*/
-}
-freeaddrinfo(res0);
-.Ed
-.\"
-.Sh FILES
-.Bl -tag -width /etc/nsswitch.conf -compact
-.It Pa /etc/hosts
-.It Pa /etc/nsswitch.conf
-.It Pa /etc/resolv.conf
-.El
-.\"
-.Sh DIAGNOSTICS
-Error return status from
-.Fn getaddrinfo
-is zero on success and non-zero on errors.
-Non-zero error codes are defined in
-.Aq Pa netdb.h ,
-and as follows:
-.Pp
-.Bl -tag -width EAI_ADDRFAMILY -compact
-.It Dv EAI_ADDRFAMILY
-Address family for
-.Fa nodename
-not supported.
-.It Dv EAI_AGAIN
-Temporary failure in name resolution.
-.It Dv EAI_BADFLAGS
-Invalid value for
-.Fa ai_flags .
-.It Dv EAI_FAIL
-Non-recoverable failure in name resolution.
-.It Dv EAI_FAMILY
-.Fa ai_family
-not supported.
-.It Dv EAI_MEMORY
-Memory allocation failure.
-.It Dv EAI_NODATA
-No address associated with
-.Fa nodename .
-.It Dv EAI_NONAME
-.Fa nodename
-nor
-.Fa servname
-provided, or not known.
-.It Dv EAI_SERVICE
-.Fa servname
-not supported for
-.Fa ai_socktype .
-.It Dv EAI_SOCKTYPE
-.Fa ai_socktype
-not supported.
-.It Dv EAI_SYSTEM
-System error returned in
-.Va errno .
-.It Dv EAI_BADHINTS
-Invalid value for
-.Fa hints .
-.It Dv EAI_PROTOCOL
-Resolved protocol is unknown.
-.It Dv EAI_MAX
-Unknown error.
-.El
-.Pp
-If called with an appropriate argument,
-.Fn gai_strerror
-returns a pointer to a string describing the given error code.
-If the argument is not one of the
-.Dv EAI_xxx
-values, the function still returns a pointer to a string whose contents
-indicate an unknown error.
-.\"
-.Sh SEE ALSO
-.Xr gethostbyname 3 ,
-.Xr getnameinfo 3 ,
-.Xr getservbyname 3 ,
-.Xr hosts 5 ,
-.Xr resolv.conf 5 ,
-.Xr services 5 ,
-.Xr hostname 7 ,
-.Xr named 8
-.Pp
-.Rs
-.%A R. Gilligan
-.%A S. Thomson
-.%A J. Bound
-.%A W. Stevens
-.%T Basic Socket Interface Extensions for IPv6
-.%R RFC2553
-.%D March 1999
-.Re
-.Rs
-.%A Tatsuya Jinmei
-.%A Atsushi Onoe
-.%T "An Extension of Format for IPv6 Scoped Addresses"
-.%R internet draft
-.%N draft-ietf-ipngwg-scopedaddr-format-02.txt
-.%O work in progress material
-.Re
-.Rs
-.%A Craig Metz
-.%T Protocol Independence Using the Sockets API
-.%B "Proceedings of the freenix track: 2000 USENIX annual technical conference"
-.%D June 2000
-.Re
-.\"
-.Sh HISTORY
-The implementation first appeared in WIDE Hydrangea IPv6 protocol stack kit.
-.\"
-.Sh STANDARDS
-The
-.Fn getaddrinfo
-function is defined in
-.St -p1003.1g-2000 ,
-and documented in
-.Dq Basic Socket Interface Extensions for IPv6
-(RFC2553).
-.\"
-.Sh BUGS
-The current implementation is not thread-safe.
-.Pp
-The text was shamelessly copied from RFC2553.
diff --git a/newlib/libc/sys/linux/net/getaddrinfo.c b/newlib/libc/sys/linux/net/getaddrinfo.c
deleted file mode 100644
index 97ba36209..000000000
--- a/newlib/libc/sys/linux/net/getaddrinfo.c
+++ /dev/null
@@ -1,1979 +0,0 @@
-/*	$KAME: getaddrinfo.c,v 1.15 2000/07/09 04:37:24 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * "#ifdef FAITH" part is local hack for supporting IPv4-v6 translator.
- *
- * Issues to be discussed:
- * - Thread safe-ness must be checked.
- * - Return values.  There are nonstandard return values defined and used
- *   in the source code.  This is because RFC2553 is silent about which error
- *   code must be returned for which situation.
- * - freeaddrinfo(NULL).  RFC2553 is silent about it.  XNET 5.2 says it is
- *   invalid.
- *   current code - SEGV on freeaddrinfo(NULL)
- * Note:
- * - We use getipnodebyname() just for thread-safeness.  There's no intent
- *   to let it do PF_UNSPEC (actually we never pass PF_UNSPEC to
- *   getipnodebyname().
- * - The code filters out AFs that are not supported by the kernel,
- *   when globbing NULL hostname (to loopback, or wildcard).  Is it the right
- *   thing to do?  What is the relationship with post-RFC2553 AI_ADDRCONFIG
- *   in ai_flags?
- * - (post-2553) semantics of AI_ADDRCONFIG itself is too vague.
- *   (1) what should we do against numeric hostname (2) what should we do
- *   against NULL hostname (3) what is AI_ADDRCONFIG itself.  AF not ready?
- *   non-loopback address configured?  global address configured?
- * - To avoid search order issue, we have a big amount of code duplicate
- *   from gethnamaddr.c and some other places.  The issues that there's no
- *   lower layer function to lookup "IPv4 or IPv6" record.  Calling
- *   gethostbyname2 from getaddrinfo will end up in wrong search order, as
- *   follows:
- *	- The code makes use of following calls when asked to resolver with
- *	  ai_family  = PF_UNSPEC:
- *		getipnodebyname(host, AF_INET6);
- *		getipnodebyname(host, AF_INET);
- *	  This will result in the following queries if the node is configure to
- *	  prefer /etc/hosts than DNS:
- *		lookup /etc/hosts for IPv6 address
- *		lookup DNS for IPv6 address
- *		lookup /etc/hosts for IPv4 address
- *		lookup DNS for IPv4 address
- *	  which may not meet people's requirement.
- *	  The right thing to happen is to have underlying layer which does
- *	  PF_UNSPEC lookup (lookup both) and return chain of addrinfos.
- *	  This would result in a bit of code duplicate with _dns_ghbyname() and
- *	  friends.
- */
-/*
- * diffs with other KAME platforms:
- * - other KAME platforms already nuked FAITH ($GAI), but as FreeBSD
- *   4.0-RELEASE supplies it, we still have the code here.
- * - AI_ADDRCONFIG support is supplied
- * - some of FreeBSD style (#define tabify and others)
- * - classful IPv4 numeric (127.1) is allowed.
- */
-
-#include <sys/cdefs.h>
-#include <machine/endian.h>
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <ctype.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <errno.h>
-#ifdef DEBUG
-#include <syslog.h>
-#endif
-
-#include <syslog.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#include "un-namespace.h"
-
-#if defined(__KAME__) && defined(INET6)
-# define FAITH
-#endif
-
-#define	SUCCESS 0
-#define	ANY 0
-#define	YES 1
-#define	NO  0
-
-static const char in_addrany[] = { 0, 0, 0, 0 };
-static const char in6_addrany[] = {
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-static const char in_loopback[] = { 127, 0, 0, 1 };
-static const char in6_loopback[] = {
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1
-};
-
-static const struct afd {
-	int a_af;
-	int a_addrlen;
-	int a_socklen;
-	int a_off;
-	const char *a_addrany;
-	const char *a_loopback;
-	int a_scoped;
-} afdl [] = {
-#ifdef INET6
-#define	N_INET6 0
-	{PF_INET6, sizeof(struct in6_addr),
-	 sizeof(struct sockaddr_in6),
-	 offsetof(struct sockaddr_in6, sin6_addr),
-	 in6_addrany, in6_loopback, 1},
-#define	N_INET 1
-#else
-#define	N_INET 0
-#endif
-	{PF_INET, sizeof(struct in_addr),
-	 sizeof(struct sockaddr_in),
-	 offsetof(struct sockaddr_in, sin_addr),
-	 in_addrany, in_loopback, 0},
-	{0, 0, 0, 0, NULL, NULL, 0},
-};
-
-struct explore {
-	int e_af;
-	int e_socktype;
-	int e_protocol;
-	const char *e_protostr;
-	int e_wild;
-#define	WILD_AF(ex)		((ex)->e_wild & 0x01)
-#define	WILD_SOCKTYPE(ex)	((ex)->e_wild & 0x02)
-#define	WILD_PROTOCOL(ex)	((ex)->e_wild & 0x04)
-};
-
-static const struct explore explore[] = {
-#if 0
-	{ PF_LOCAL, 0, ANY, ANY, NULL, 0x01 },
-#endif
-#ifdef INET6
-	{ PF_INET6, SOCK_DGRAM, IPPROTO_UDP, "udp", 0x07 },
-	{ PF_INET6, SOCK_STREAM, IPPROTO_TCP, "tcp", 0x07 },
-	{ PF_INET6, SOCK_RAW, ANY, NULL, 0x05 },
-#endif
-	{ PF_INET, SOCK_DGRAM, IPPROTO_UDP, "udp", 0x07 },
-	{ PF_INET, SOCK_STREAM, IPPROTO_TCP, "tcp", 0x07 },
-	{ PF_INET, SOCK_RAW, ANY, NULL, 0x05 },
-	{ PF_UNSPEC, SOCK_DGRAM, IPPROTO_UDP, "udp", 0x07 },
-	{ PF_UNSPEC, SOCK_STREAM, IPPROTO_TCP, "tcp", 0x07 },
-	{ PF_UNSPEC, SOCK_RAW, ANY, NULL, 0x05 },
-	{ -1, 0, 0, NULL, 0 },
-};
-
-#ifdef INET6
-#define	PTON_MAX	16
-#else
-#define	PTON_MAX	4
-#endif
-
-static const ns_src default_dns_files[] = {
-	{ NSSRC_FILES, 	NS_SUCCESS },
-	{ NSSRC_DNS, 	NS_SUCCESS },
-	{ 0 }
-};
-
-#if PACKETSZ > 1024
-#define MAXPACKET	PACKETSZ
-#else
-#define MAXPACKET	1024
-#endif
-
-typedef union {
-	HEADER hdr;
-	u_char buf[MAXPACKET];
-} querybuf;
-
-struct res_target {
-	struct res_target *next;
-	const char *name;	/* domain name */
-	int qclass, qtype;	/* class and type of query */
-	u_char *answer;		/* buffer to put answer */
-	int anslen;		/* size of answer buffer */
-	int n;			/* result length */
-};
-
-static int str_isnumber(const char *);
-static int explore_fqdn(const struct addrinfo *, const char *,
-	const char *, struct addrinfo **);
-static int explore_null(const struct addrinfo *,
-	const char *, struct addrinfo **);
-static int explore_numeric(const struct addrinfo *, const char *,
-	const char *, struct addrinfo **);
-static int explore_numeric_scope(const struct addrinfo *, const char *,
-	const char *, struct addrinfo **);
-static int get_canonname(const struct addrinfo *,
-	struct addrinfo *, const char *);
-static struct addrinfo *get_ai(const struct addrinfo *,
-	const struct afd *, const char *);
-static int get_portmatch(const struct addrinfo *, const char *);
-static int get_port(struct addrinfo *, const char *, int);
-static const struct afd *find_afd(int);
-static int addrconfig(struct addrinfo *);
-#ifdef INET6
-static int ip6_str2scopeid(char *, struct sockaddr_in6 *);
-#endif
-
-static struct addrinfo *getanswer(const querybuf *, int, const char *, int,
-	const struct addrinfo *);
-static int _dns_getaddrinfo(void *, void *, va_list);
-static void _sethtent(void);
-static void _endhtent(void);
-static struct addrinfo *_gethtent(const char *, const struct addrinfo *);
-static int _files_getaddrinfo(void *, void *, va_list);
-#ifdef YP
-static struct addrinfo *_yphostent(char *, const struct addrinfo *);
-static int _yp_getaddrinfo(void *, void *, va_list);
-extern int _yp_check(char **);
-#endif
-
-u_int16_t _getshort(const u_char *src);
-
-static int res_queryN(const char *, struct res_target *);
-static int res_searchN(const char *, struct res_target *);
-static int res_querydomainN(const char *, const char *,
-	struct res_target *);
-
-static char *ai_errlist[] = {
-	"Success",
-	"Address family for hostname not supported",	/* EAI_ADDRFAMILY */
-	"Temporary failure in name resolution",		/* EAI_AGAIN      */
-	"Invalid value for ai_flags",		       	/* EAI_BADFLAGS   */
-	"Non-recoverable failure in name resolution", 	/* EAI_FAIL       */
-	"ai_family not supported",			/* EAI_FAMILY     */
-	"Memory allocation failure", 			/* EAI_MEMORY     */
-	"No address associated with hostname", 		/* EAI_NODATA     */
-	"hostname nor servname provided, or not known",	/* EAI_NONAME     */
-	"servname not supported for ai_socktype",	/* EAI_SERVICE    */
-	"ai_socktype not supported", 			/* EAI_SOCKTYPE   */
-	"System error returned in errno", 		/* EAI_SYSTEM     */
-	"Invalid value for hints",			/* EAI_BADHINTS	  */
-	"Resolved protocol is unknown",			/* EAI_PROTOCOL   */
-	"Unknown error", 				/* EAI_MAX        */
-};
-
-/* XXX macros that make external reference is BAD. */
-
-#define	GET_AI(ai, afd, addr) \
-do { \
-	/* external reference: pai, error, and label free */ \
-	(ai) = get_ai(pai, (afd), (addr)); \
-	if ((ai) == NULL) { \
-		error = EAI_MEMORY; \
-		goto free; \
-	} \
-} while (/*CONSTCOND*/0)
-
-#define	GET_PORT(ai, serv) \
-do { \
-	/* external reference: error and label free */ \
-	error = get_port((ai), (serv), 0); \
-	if (error != 0) \
-		goto free; \
-} while (/*CONSTCOND*/0)
-
-#define	GET_CANONNAME(ai, str) \
-do { \
-	/* external reference: pai, error and label free */ \
-	error = get_canonname(pai, (ai), (str)); \
-	if (error != 0) \
-		goto free; \
-} while (/*CONSTCOND*/0)
-
-#define	ERR(err) \
-do { \
-	/* external reference: error, and label bad */ \
-	error = (err); \
-	goto bad; \
-	/*NOTREACHED*/ \
-} while (/*CONSTCOND*/0)
-
-#define	MATCH_FAMILY(x, y, w) \
-	((x) == (y) || (/*CONSTCOND*/(w) && ((x) == PF_UNSPEC || (y) == PF_UNSPEC)))
-#define	MATCH(x, y, w) \
-	((x) == (y) || (/*CONSTCOND*/(w) && ((x) == ANY || (y) == ANY)))
-
-char *
-gai_strerror(ecode)
-	int ecode;
-{
-	if (ecode < 0 || ecode > EAI_MAX)
-		ecode = EAI_MAX;
-	return ai_errlist[ecode];
-}
-
-void
-freeaddrinfo(ai)
-	struct addrinfo *ai;
-{
-	struct addrinfo *next;
-
-	do {
-		next = ai->ai_next;
-		if (ai->ai_canonname)
-			free(ai->ai_canonname);
-		/* no need to free(ai->ai_addr) */
-		free(ai);
-		ai = next;
-	} while (ai);
-}
-
-static int
-str_isnumber(p)
-	const char *p;
-{
-	char *ep;
-
-	if (*p == '\0')
-		return NO;
-	ep = NULL;
-	(void)strtoul(p, &ep, 10);
-	if (ep && *ep == '\0')
-		return YES;
-	else
-		return NO;
-}
-
-int
-getaddrinfo(hostname, servname, hints, res)
-	const char *hostname, *servname;
-	const struct addrinfo *hints;
-	struct addrinfo **res;
-{
-	struct addrinfo sentinel;
-	struct addrinfo *cur;
-	int error = 0;
-	struct addrinfo ai;
-	struct addrinfo ai0;
-	struct addrinfo *pai;
-	const struct explore *ex;
-
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-	pai = &ai;
-	pai->ai_flags = 0;
-	pai->ai_family = PF_UNSPEC;
-	pai->ai_socktype = ANY;
-	pai->ai_protocol = ANY;
-	pai->ai_addrlen = 0;
-	pai->ai_canonname = NULL;
-	pai->ai_addr = NULL;
-	pai->ai_next = NULL;
-
-	if (hostname == NULL && servname == NULL)
-		return EAI_NONAME;
-	if (hints) {
-		/* error check for hints */
-		if (hints->ai_addrlen || hints->ai_canonname ||
-		    hints->ai_addr || hints->ai_next)
-			ERR(EAI_BADHINTS); /* xxx */
-		if (hints->ai_flags & ~AI_MASK)
-			ERR(EAI_BADFLAGS);
-		switch (hints->ai_family) {
-		case PF_UNSPEC:
-		case PF_INET:
-#ifdef INET6
-		case PF_INET6:
-#endif
-			break;
-		default:
-			ERR(EAI_FAMILY);
-		}
-		memcpy(pai, hints, sizeof(*pai));
-
-		/*
-		 * if both socktype/protocol are specified, check if they
-		 * are meaningful combination.
-		 */
-		if (pai->ai_socktype != ANY && pai->ai_protocol != ANY) {
-			for (ex = explore; ex->e_af >= 0; ex++) {
-				if (pai->ai_family != ex->e_af)
-					continue;
-				if (ex->e_socktype == ANY)
-					continue;
-				if (ex->e_protocol == ANY)
-					continue;
-				if (pai->ai_socktype == ex->e_socktype
-				 && pai->ai_protocol != ex->e_protocol) {
-					ERR(EAI_BADHINTS);
-				}
-			}
-		}
-	}
-
-	/*
-	 * post-2553: AI_ALL and AI_V4MAPPED are effective only against
-	 * AF_INET6 query.  They needs to be ignored if specified in other
-	 * occassions.
-	 */
-	switch (pai->ai_flags & (AI_ALL | AI_V4MAPPED)) {
-	case AI_V4MAPPED:
-	case AI_ALL | AI_V4MAPPED:
-		if (pai->ai_family != AF_INET6)
-			pai->ai_flags &= ~(AI_ALL | AI_V4MAPPED);
-		break;
-	case AI_ALL:
-#if 1
-		/* illegal */
-		ERR(EAI_BADFLAGS);
-#else
-		pai->ai_flags &= ~(AI_ALL | AI_V4MAPPED);
-#endif
-		break;
-	}
-
-	/*
-	 * check for special cases.  (1) numeric servname is disallowed if
-	 * socktype/protocol are left unspecified. (2) servname is disallowed
-	 * for raw and other inet{,6} sockets.
-	 */
-	if (MATCH_FAMILY(pai->ai_family, PF_INET, 1)
-#ifdef PF_INET6
-	    || MATCH_FAMILY(pai->ai_family, PF_INET6, 1)
-#endif
-	    ) {
-		ai0 = *pai;	/* backup *pai */
-
-		if (pai->ai_family == PF_UNSPEC) {
-#ifdef PF_INET6
-			pai->ai_family = PF_INET6;
-#else
-			pai->ai_family = PF_INET;
-#endif
-		}
-		error = get_portmatch(pai, servname);
-		if (error)
-			ERR(error);
-
-		*pai = ai0;
-	}
-
-	ai0 = *pai;
-
-	/* NULL hostname, or numeric hostname */
-	for (ex = explore; ex->e_af >= 0; ex++) {
-		*pai = ai0;
-
-		/* PF_UNSPEC entries are prepared for DNS queries only */
-		if (ex->e_af == PF_UNSPEC)
-			continue;
-
-		if (!MATCH_FAMILY(pai->ai_family, ex->e_af, WILD_AF(ex)))
-			continue;
-		if (!MATCH(pai->ai_socktype, ex->e_socktype, WILD_SOCKTYPE(ex)))
-			continue;
-		if (!MATCH(pai->ai_protocol, ex->e_protocol, WILD_PROTOCOL(ex)))
-			continue;
-
-		if (pai->ai_family == PF_UNSPEC)
-			pai->ai_family = ex->e_af;
-		if (pai->ai_socktype == ANY && ex->e_socktype != ANY)
-			pai->ai_socktype = ex->e_socktype;
-		if (pai->ai_protocol == ANY && ex->e_protocol != ANY)
-			pai->ai_protocol = ex->e_protocol;
-
-		if (hostname == NULL)
-			error = explore_null(pai, servname, &cur->ai_next);
-		else
-			error = explore_numeric_scope(pai, hostname, servname, &cur->ai_next);
-
-		if (error)
-			goto free;
-
-		while (cur && cur->ai_next)
-			cur = cur->ai_next;
-	}
-
-	/*
-	 * XXX
-	 * If numreic representation of AF1 can be interpreted as FQDN
-	 * representation of AF2, we need to think again about the code below.
-	 */
-	if (sentinel.ai_next)
-		goto good;
-
-	if (pai->ai_flags & AI_NUMERICHOST)
-		ERR(EAI_NONAME);
-	if (hostname == NULL)
-		ERR(EAI_NODATA);
-
-	if ((pai->ai_flags & AI_ADDRCONFIG) != 0 && !addrconfig(&ai0))
-		ERR(EAI_FAIL);
-
-	/*
-	 * hostname as alphabetical name.
-	 * we would like to prefer AF_INET6 than AF_INET, so we'll make a
-	 * outer loop by AFs.
-	 */
-	for (ex = explore; ex->e_af >= 0; ex++) {
-		*pai = ai0;
-
-		/* require exact match for family field */
-		if (pai->ai_family != ex->e_af)
-			continue;
-
-		if (!MATCH(pai->ai_socktype, ex->e_socktype,
-				WILD_SOCKTYPE(ex))) {
-			continue;
-		}
-		if (!MATCH(pai->ai_protocol, ex->e_protocol,
-				WILD_PROTOCOL(ex))) {
-			continue;
-		}
-
-		if (pai->ai_socktype == ANY && ex->e_socktype != ANY)
-			pai->ai_socktype = ex->e_socktype;
-		if (pai->ai_protocol == ANY && ex->e_protocol != ANY)
-			pai->ai_protocol = ex->e_protocol;
-
-		error = explore_fqdn(pai, hostname, servname,
-			&cur->ai_next);
-
-		while (cur && cur->ai_next)
-			cur = cur->ai_next;
-	}
-
-	/* XXX */
-	if (sentinel.ai_next)
-		error = 0;
-
-	if (error)
-		goto free;
-	if (error == 0) {
-		if (sentinel.ai_next) {
- good:
-			*res = sentinel.ai_next;
-			return SUCCESS;
-		} else
-			error = EAI_FAIL;
-	}
- free:
- bad:
-	if (sentinel.ai_next)
-		freeaddrinfo(sentinel.ai_next);
-	*res = NULL;
-	return error;
-}
-
-/*
- * FQDN hostname, DNS lookup
- */
-static int
-explore_fqdn(pai, hostname, servname, res)
-	const struct addrinfo *pai;
-	const char *hostname;
-	const char *servname;
-	struct addrinfo **res;
-{
-	struct addrinfo *result;
-	struct addrinfo *cur;
-	int error = 0;
-	static const ns_dtab dtab[] = {
-		NS_FILES_CB(_files_getaddrinfo, NULL)
-		{ NSSRC_DNS, _dns_getaddrinfo, NULL },	/* force -DHESIOD */
-		NS_NIS_CB(_yp_getaddrinfo, NULL)
-		{ 0 }
-	};
-
-	result = NULL;
-
-	/*
-	 * if the servname does not match socktype/protocol, ignore it.
-	 */
-	if (get_portmatch(pai, servname) != 0)
-		return 0;
-
-	switch (nsdispatch(&result, dtab, NSDB_HOSTS, "getaddrinfo",
-			default_dns_files, hostname, pai)) {
-	case NS_TRYAGAIN:
-		error = EAI_AGAIN;
-		goto free;
-	case NS_UNAVAIL:
-		error = EAI_FAIL;
-		goto free;
-	case NS_NOTFOUND:
-		error = EAI_NODATA;
-		goto free;
-	case NS_SUCCESS:
-		error = 0;
-		for (cur = result; cur; cur = cur->ai_next) {
-			GET_PORT(cur, servname);
-			/* canonname should be filled already */
-		}
-		break;
-	}
-
-	*res = result;
-
-	return 0;
-
-free:
-	if (result)
-		freeaddrinfo(result);
-	return error;
-}
-
-/*
- * hostname == NULL.
- * passive socket -> anyaddr (0.0.0.0 or ::)
- * non-passive socket -> localhost (127.0.0.1 or ::1)
- */
-static int
-explore_null(pai, servname, res)
-	const struct addrinfo *pai;
-	const char *servname;
-	struct addrinfo **res;
-{
-	int s;
-	const struct afd *afd;
-	struct addrinfo *cur;
-	struct addrinfo sentinel;
-	int error;
-
-	*res = NULL;
-	sentinel.ai_next = NULL;
-	cur = &sentinel;
-
-	/*
-	 * filter out AFs that are not supported by the kernel
-	 * XXX errno?
-	 */
-	s = socket(pai->ai_family, SOCK_DGRAM, 0);
-	if (s < 0) {
-		if (errno != EMFILE)
-			return 0;
-	} else
-		close(s);
-
-	/*
-	 * if the servname does not match socktype/protocol, ignore it.
-	 */
-	if (get_portmatch(pai, servname) != 0)
-		return 0;
-
-	afd = find_afd(pai->ai_family);
-	if (afd == NULL)
-		return 0;
-
-	if (pai->ai_flags & AI_PASSIVE) {
-		GET_AI(cur->ai_next, afd, afd->a_addrany);
-		/* xxx meaningless?
-		 * GET_CANONNAME(cur->ai_next, "anyaddr");
-		 */
-		GET_PORT(cur->ai_next, servname);
-	} else {
-		GET_AI(cur->ai_next, afd, afd->a_loopback);
-		/* xxx meaningless?
-		 * GET_CANONNAME(cur->ai_next, "localhost");
-		 */
-		GET_PORT(cur->ai_next, servname);
-	}
-	cur = cur->ai_next;
-
-	*res = sentinel.ai_next;
-	return 0;
-
-free:
-	if (sentinel.ai_next)
-		freeaddrinfo(sentinel.ai_next);
-	return error;
-}
-
-/*
- * numeric hostname
- */
-static int
-explore_numeric(pai, hostname, servname, res)
-	const struct addrinfo *pai;
-	const char *hostname;
-	const char *servname;
-	struct addrinfo **res;
-{
-	const struct afd *afd;
-	struct addrinfo *cur;
-	struct addrinfo sentinel;
-	int error;
-	char pton[PTON_MAX];
-
-	*res = NULL;
-	sentinel.ai_next = NULL;
-	cur = &sentinel;
-
-	/*
-	 * if the servname does not match socktype/protocol, ignore it.
-	 */
-	if (get_portmatch(pai, servname) != 0)
-		return 0;
-
-	afd = find_afd(pai->ai_family);
-	if (afd == NULL)
-		return 0;
-
-	switch (afd->a_af) {
-#if 1 /*X/Open spec*/
-	case AF_INET:
-		if (inet_aton(hostname, (struct in_addr *)pton) == 1) {
-			if (pai->ai_family == afd->a_af ||
-			    pai->ai_family == PF_UNSPEC /*?*/) {
-				GET_AI(cur->ai_next, afd, pton);
-				GET_PORT(cur->ai_next, servname);
-				while (cur && cur->ai_next)
-					cur = cur->ai_next;
-			} else
-				ERR(EAI_FAMILY);	/*xxx*/
-		}
-		break;
-#endif
-	default:
-		if (inet_pton(afd->a_af, hostname, pton) == 1) {
-			if (pai->ai_family == afd->a_af ||
-			    pai->ai_family == PF_UNSPEC /*?*/) {
-				GET_AI(cur->ai_next, afd, pton);
-				GET_PORT(cur->ai_next, servname);
-				while (cur && cur->ai_next)
-					cur = cur->ai_next;
-			} else
-				ERR(EAI_FAMILY);	/*xxx*/
-		}
-		break;
-	}
-
-	*res = sentinel.ai_next;
-	return 0;
-
-free:
-bad:
-	if (sentinel.ai_next)
-		freeaddrinfo(sentinel.ai_next);
-	return error;
-}
-
-/*
- * numeric hostname with scope
- */
-static int
-explore_numeric_scope(pai, hostname, servname, res)
-	const struct addrinfo *pai;
-	const char *hostname;
-	const char *servname;
-	struct addrinfo **res;
-{
-#if !defined(SCOPE_DELIMITER) || !defined(INET6)
-	return explore_numeric(pai, hostname, servname, res);
-#else
-	const struct afd *afd;
-	struct addrinfo *cur;
-	int error;
-	char *cp, *hostname2 = NULL, *scope, *addr;
-	struct sockaddr_in6 *sin6;
-
-	/*
-	 * if the servname does not match socktype/protocol, ignore it.
-	 */
-	if (get_portmatch(pai, servname) != 0)
-		return 0;
-
-	afd = find_afd(pai->ai_family);
-	if (afd == NULL)
-		return 0;
-
-	if (!afd->a_scoped)
-		return explore_numeric(pai, hostname, servname, res);
-
-	cp = strchr(hostname, SCOPE_DELIMITER);
-	if (cp == NULL)
-		return explore_numeric(pai, hostname, servname, res);
-
-	/*
-	 * Handle special case of <scoped_address><delimiter><scope id>
-	 */
-	hostname2 = strdup(hostname);
-	if (hostname2 == NULL)
-		return EAI_MEMORY;
-	/* terminate at the delimiter */
-	hostname2[cp - hostname] = '\0';
-	addr = hostname2;
-	scope = cp + 1;
-
-	error = explore_numeric(pai, addr, servname, res);
-	if (error == 0) {
-		int scopeid;
-
-		for (cur = *res; cur; cur = cur->ai_next) {
-			if (cur->ai_family != AF_INET6)
-				continue;
-			sin6 = (struct sockaddr_in6 *)(void *)cur->ai_addr;
-			if ((scopeid = ip6_str2scopeid(scope, sin6)) == -1) {
-				free(hostname2);
-				return(EAI_NODATA); /* XXX: is return OK? */
-			}
-			sin6->sin6_scope_id = scopeid;
-		}
-	}
-
-	free(hostname2);
-
-	return error;
-#endif
-}
-
-static int
-get_canonname(pai, ai, str)
-	const struct addrinfo *pai;
-	struct addrinfo *ai;
-	const char *str;
-{
-	if ((pai->ai_flags & AI_CANONNAME) != 0) {
-		ai->ai_canonname = (char *)malloc(strlen(str) + 1);
-		if (ai->ai_canonname == NULL)
-			return EAI_MEMORY;
-		strcpy(ai->ai_canonname, str);
-	}
-	return 0;
-}
-
-static struct addrinfo *
-get_ai(pai, afd, addr)
-	const struct addrinfo *pai;
-	const struct afd *afd;
-	const char *addr;
-{
-	char *p;
-	struct addrinfo *ai;
-#ifdef FAITH
-	struct in6_addr faith_prefix;
-	char *fp_str;
-	int translate = 0;
-#endif
-
-#ifdef FAITH
-	/*
-	 * Transfrom an IPv4 addr into a special IPv6 addr format for
-	 * IPv6->IPv4 translation gateway. (only TCP is supported now)
-	 *
-	 * +-----------------------------------+------------+
-	 * | faith prefix part (12 bytes)      | embedded   |
-	 * |                                   | IPv4 addr part (4 bytes)
-	 * +-----------------------------------+------------+
-	 *
-	 * faith prefix part is specified as ascii IPv6 addr format
-	 * in environmental variable GAI.
-	 * For FAITH to work correctly, routing to faith prefix must be
-	 * setup toward a machine where a FAITH daemon operates.
-	 * Also, the machine must enable some mechanizm
-	 * (e.g. faith interface hack) to divert those packet with
-	 * faith prefixed destination addr to user-land FAITH daemon.
-	 */
-	fp_str = getenv("GAI");
-	if (fp_str && inet_pton(AF_INET6, fp_str, &faith_prefix) == 1 &&
-	    afd->a_af == AF_INET && pai->ai_socktype == SOCK_STREAM) {
-		u_int32_t v4a;
-		u_int8_t v4a_top;
-
-		memcpy(&v4a, addr, sizeof v4a);
-		v4a_top = v4a >> IN_CLASSA_NSHIFT;
-		if (!IN_MULTICAST(v4a) && !IN_EXPERIMENTAL(v4a) &&
-		    v4a_top != 0 && v4a != IN_LOOPBACKNET) {
-			afd = &afdl[N_INET6];
-			memcpy(&faith_prefix.s6_addr[12], addr,
-			       sizeof(struct in_addr));
-			translate = 1;
-		}
-	}
-#endif
-
-	ai = (struct addrinfo *)malloc(sizeof(struct addrinfo)
-		+ (afd->a_socklen));
-	if (ai == NULL)
-		return NULL;
-
-	memcpy(ai, pai, sizeof(struct addrinfo));
-	ai->ai_addr = (struct sockaddr *)(void *)(ai + 1);
-	memset(ai->ai_addr, 0, (size_t)afd->a_socklen);
-	ai->ai_addrlen = afd->a_socklen;
-	ai->ai_addr->sa_family = ai->ai_family = afd->a_af;
-	p = (char *)(void *)(ai->ai_addr);
-#ifdef FAITH
-	if (translate == 1)
-		memcpy(p + afd->a_off, &faith_prefix, (size_t)afd->a_addrlen);
-	else
-#endif
-	memcpy(p + afd->a_off, addr, (size_t)afd->a_addrlen);
-	return ai;
-}
-
-static int
-get_portmatch(ai, servname)
-	const struct addrinfo *ai;
-	const char *servname;
-{
-
-	/* get_port does not touch first argument. when matchonly == 1. */
-	/* LINTED const cast */
-	return get_port((struct addrinfo *)ai, servname, 1);
-}
-
-static int
-get_port(ai, servname, matchonly)
-	struct addrinfo *ai;
-	const char *servname;
-	int matchonly;
-{
-	const char *proto;
-	struct servent *sp;
-	int port;
-	int allownumeric;
-
-	if (servname == NULL)
-		return 0;
-	switch (ai->ai_family) {
-	case AF_INET:
-#ifdef AF_INET6
-	case AF_INET6:
-#endif
-		break;
-	default:
-		return 0;
-	}
-
-	switch (ai->ai_socktype) {
-	case SOCK_RAW:
-		return EAI_SERVICE;
-	case SOCK_DGRAM:
-	case SOCK_STREAM:
-		allownumeric = 1;
-		break;
-	case ANY:
-		allownumeric = 0;
-		break;
-	default:
-		return EAI_SOCKTYPE;
-	}
-
-	if (str_isnumber(servname)) {
-		if (!allownumeric)
-			return EAI_SERVICE;
-		port = htons(atoi(servname));
-		if (port < 0 || port > 65535)
-			return EAI_SERVICE;
-	} else {
-		switch (ai->ai_socktype) {
-		case SOCK_DGRAM:
-			proto = "udp";
-			break;
-		case SOCK_STREAM:
-			proto = "tcp";
-			break;
-		default:
-			proto = NULL;
-			break;
-		}
-
-		if ((sp = getservbyname(servname, proto)) == NULL)
-			return EAI_SERVICE;
-		port = sp->s_port;
-	}
-
-	if (!matchonly) {
-		switch (ai->ai_family) {
-		case AF_INET:
-			((struct sockaddr_in *)(void *)
-			    ai->ai_addr)->sin_port = port;
-			break;
-#ifdef INET6
-		case AF_INET6:
-			((struct sockaddr_in6 *)(void *)
-			    ai->ai_addr)->sin6_port = port;
-			break;
-#endif
-		}
-	}
-
-	return 0;
-}
-
-static const struct afd *
-find_afd(af)
-	int af;
-{
-	const struct afd *afd;
-
-	if (af == PF_UNSPEC)
-		return NULL;
-	for (afd = afdl; afd->a_af; afd++) {
-		if (afd->a_af == af)
-			return afd;
-	}
-	return NULL;
-}
-
-/*
- * post-2553: AI_ADDRCONFIG check.  if we use getipnodeby* as backend, backend
- * will take care of it.
- * the semantics of AI_ADDRCONFIG is not defined well.  we are not sure
- * if the code is right or not.
- *
- * XXX PF_UNSPEC -> PF_INET6 + PF_INET mapping needs to be in sync with
- * _dns_getaddrinfo.
- */
-static int
-addrconfig(pai)
-	struct addrinfo *pai;
-{
-	int s, af;
-
-	/*
-	 * TODO:
-	 * Note that implementation dependent test for address
-	 * configuration should be done everytime called
-	 * (or apropriate interval),
-	 * because addresses will be dynamically assigned or deleted.
-	 */
-	af = pai->ai_family;
-	if (af == AF_UNSPEC) {
-		if ((s = socket(AF_INET6, SOCK_DGRAM, 0)) < 0)
-			af = AF_INET;
-		else {
-			close(s);
-			if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-				af = AF_INET6;
-			else
-				close(s);
-		}
-	}
-	if (af != AF_UNSPEC) {
-		if ((s = socket(af, SOCK_DGRAM, 0)) < 0)
-			return 0;
-		close(s);
-	}
-	pai->ai_family = af;
-	return 1;
-}
-
-#ifdef INET6
-/* convert a string to a scope identifier. XXX: IPv6 specific */
-static int
-ip6_str2scopeid(scope, sin6)
-	char *scope;
-	struct sockaddr_in6 *sin6;
-{
-	int scopeid;
-	struct in6_addr *a6 = &sin6->sin6_addr;
-	char *ep;
-
-	/* empty scopeid portion is invalid */
-	if (*scope == '\0')
-		return -1;
-
-	if (IN6_IS_ADDR_LINKLOCAL(a6) || IN6_IS_ADDR_MC_LINKLOCAL(a6)) {
-		/*
-		 * We currently assume a one-to-one mapping between links
-		 * and interfaces, so we simply use interface indices for
-		 * like-local scopes.
-		 */
-		scopeid = if_nametoindex(scope);
-		if (scopeid == 0)
-			goto trynumeric;
-		return(scopeid);
-	}
-
-	/* still unclear about literal, allow numeric only - placeholder */
-	if (IN6_IS_ADDR_SITELOCAL(a6) || IN6_IS_ADDR_MC_SITELOCAL(a6))
-		goto trynumeric;
-	if (IN6_IS_ADDR_MC_ORGLOCAL(a6))
-		goto trynumeric;
-	else
-		goto trynumeric;	/* global */
-
-	/* try to convert to a numeric id as a last resort */
-  trynumeric:
-	scopeid = (int)strtoul(scope, &ep, 10);
-	if (*ep == '\0')
-		return scopeid;
-	else
-		return -1;
-}
-#endif
-
-#ifdef DEBUG
-static const char AskedForGot[] =
-	"gethostby*.getanswer: asked for \"%s\", got \"%s\"";
-#endif
-static FILE *hostf = NULL;
-
-static struct addrinfo *
-getanswer(answer, anslen, qname, qtype, pai)
-	const querybuf *answer;
-	int anslen;
-	const char *qname;
-	int qtype;
-	const struct addrinfo *pai;
-{
-	struct addrinfo sentinel, *cur;
-	struct addrinfo ai;
-	const struct afd *afd;
-	char *canonname;
-	const HEADER *hp;
-	const u_char *cp;
-	int n;
-	const u_char *eom;
-	char *bp;
-	int type, class, buflen, ancount, qdcount;
-	int haveanswer, had_error;
-	char tbuf[MAXDNAME];
-	int (*name_ok)(const char *);
-	char hostbuf[8*1024];
-
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-
-	canonname = NULL;
-	eom = answer->buf + anslen;
-	switch (qtype) {
-	case T_A:
-	case T_AAAA:
-	case T_ANY:	/*use T_ANY only for T_A/T_AAAA lookup*/
-		name_ok = res_hnok;
-		break;
-	default:
-		return (NULL);	/* XXX should be abort(); */
-	}
-	/*
-	 * find first satisfactory answer
-	 */
-	hp = &answer->hdr;
-	ancount = ntohs(hp->ancount);
-	qdcount = ntohs(hp->qdcount);
-	bp = hostbuf;
-	buflen = sizeof hostbuf;
-	cp = answer->buf + HFIXEDSZ;
-	if (qdcount != 1) {
-		h_errno = NO_RECOVERY;
-		return (NULL);
-	}
-	n = dn_expand(answer->buf, eom, cp, bp, buflen);
-	if ((n < 0) || !(*name_ok)(bp)) {
-		h_errno = NO_RECOVERY;
-		return (NULL);
-	}
-	cp += n + QFIXEDSZ;
-	if (qtype == T_A || qtype == T_AAAA || qtype == T_ANY) {
-		/* res_send() has already verified that the query name is the
-		 * same as the one we sent; this just gets the expanded name
-		 * (i.e., with the succeeding search-domain tacked on).
-		 */
-		n = strlen(bp) + 1;		/* for the \0 */
-		if (n >= MAXHOSTNAMELEN) {
-			h_errno = NO_RECOVERY;
-			return (NULL);
-		}
-		canonname = bp;
-		bp += n;
-		buflen -= n;
-		/* The qname can be abbreviated, but h_name is now absolute. */
-		qname = canonname;
-	}
-	haveanswer = 0;
-	had_error = 0;
-	while (ancount-- > 0 && cp < eom && !had_error) {
-		n = dn_expand(answer->buf, eom, cp, bp, buflen);
-		if ((n < 0) || !(*name_ok)(bp)) {
-			had_error++;
-			continue;
-		}
-		cp += n;			/* name */
-		type = _getshort(cp);
- 		cp += INT16SZ;			/* type */
-		class = _getshort(cp);
- 		cp += INT16SZ + INT32SZ;	/* class, TTL */
-		n = _getshort(cp);
-		cp += INT16SZ;			/* len */
-		if (class != C_IN) {
-			/* XXX - debug? syslog? */
-			cp += n;
-			continue;		/* XXX - had_error++ ? */
-		}
-		if ((qtype == T_A || qtype == T_AAAA || qtype == T_ANY) &&
-		    type == T_CNAME) {
-			n = dn_expand(answer->buf, eom, cp, tbuf, sizeof tbuf);
-			if ((n < 0) || !(*name_ok)(tbuf)) {
-				had_error++;
-				continue;
-			}
-			cp += n;
-			/* Get canonical name. */
-			n = strlen(tbuf) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN) {
-				had_error++;
-				continue;
-			}
-			strcpy(bp, tbuf);
-			canonname = bp;
-			bp += n;
-			buflen -= n;
-			continue;
-		}
-		if (qtype == T_ANY) {
-			if (!(type == T_A || type == T_AAAA)) {
-				cp += n;
-				continue;
-			}
-		} else if (type != qtype) {
-#ifdef DEBUG
-			if (type != T_KEY && type != T_SIG)
-				syslog(LOG_NOTICE|LOG_AUTH,
-	       "gethostby*.getanswer: asked for \"%s %s %s\", got type \"%s\"",
-				       qname, p_class(C_IN), p_type(qtype),
-				       p_type(type));
-#endif
-			cp += n;
-			continue;		/* XXX - had_error++ ? */
-		}
-		switch (type) {
-		case T_A:
-		case T_AAAA:
-			if (strcasecmp(canonname, bp) != 0) {
-#ifdef DEBUG
-				syslog(LOG_NOTICE|LOG_AUTH,
-				       AskedForGot, canonname, bp);
-#endif
-				cp += n;
-				continue;	/* XXX - had_error++ ? */
-			}
-			if (type == T_A && n != INADDRSZ) {
-				cp += n;
-				continue;
-			}
-			if (type == T_AAAA && n != IN6ADDRSZ) {
-				cp += n;
-				continue;
-			}
-#ifdef FILTER_V4MAPPED
-			if (type == T_AAAA) {
-				struct in6_addr in6;
-				memcpy(&in6, cp, sizeof(in6));
-				if (IN6_IS_ADDR_V4MAPPED(&in6)) {
-					cp += n;
-					continue;
-				}
-			}
-#endif
-			if (!haveanswer) {
-				int nn;
-
-				canonname = bp;
-				nn = strlen(bp) + 1;	/* for the \0 */
-				bp += nn;
-				buflen -= nn;
-			}
-
-			/* don't overwrite pai */
-			ai = *pai;
-			ai.ai_family = (type == T_A) ? AF_INET : AF_INET6;
-			afd = find_afd(ai.ai_family);
-			if (afd == NULL) {
-				cp += n;
-				continue;
-			}
-			cur->ai_next = get_ai(&ai, afd, (const char *)cp);
-			if (cur->ai_next == NULL)
-				had_error++;
-			while (cur && cur->ai_next)
-				cur = cur->ai_next;
-			cp += n;
-			break;
-		default:
-			abort();
-		}
-		if (!had_error)
-			haveanswer++;
-	}
-	if (haveanswer) {
-		if (!canonname)
-			(void)get_canonname(pai, sentinel.ai_next, qname);
-		else
-			(void)get_canonname(pai, sentinel.ai_next, canonname);
-		h_errno = NETDB_SUCCESS;
-		return sentinel.ai_next;
-	}
-
-	h_errno = NO_RECOVERY;
-	return NULL;
-}
-
-/*ARGSUSED*/
-static int
-_dns_getaddrinfo(rv, cb_data, ap)
-	void	*rv;
-	void	*cb_data;
-	va_list	 ap;
-{
-	struct addrinfo *ai;
-	querybuf buf, buf2;
-	const char *name;
-	const struct addrinfo *pai;
-	struct addrinfo sentinel, *cur;
-	struct res_target q, q2;
-
-	name = va_arg(ap, char *);
-	pai = va_arg(ap, const struct addrinfo *);
-
-	memset(&q, 0, sizeof(q2));
-	memset(&q2, 0, sizeof(q2));
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-
-	switch (pai->ai_family) {
-	case AF_UNSPEC:
-		/* prefer IPv6 */
-		q.qclass = C_IN;
-		q.qtype = T_AAAA;
-		q.answer = buf.buf;
-		q.anslen = sizeof(buf);
-		q.next = &q2;
-		q2.qclass = C_IN;
-		q2.qtype = T_A;
-		q2.answer = buf2.buf;
-		q2.anslen = sizeof(buf2);
-		break;
-	case AF_INET:
-		q.qclass = C_IN;
-		q.qtype = T_A;
-		q.answer = buf.buf;
-		q.anslen = sizeof(buf);
-		break;
-	case AF_INET6:
-		q.qclass = C_IN;
-		q.qtype = T_AAAA;
-		q.answer = buf.buf;
-		q.anslen = sizeof(buf);
-		break;
-	default:
-		return NS_UNAVAIL;
-	}
-	if (res_searchN(name, &q) < 0)
-		return NS_NOTFOUND;
-	ai = getanswer(&buf, q.n, q.name, q.qtype, pai);
-	if (ai) {
-		cur->ai_next = ai;
-		while (cur && cur->ai_next)
-			cur = cur->ai_next;
-	}
-	if (q.next) {
-		ai = getanswer(&buf2, q2.n, q2.name, q2.qtype, pai);
-		if (ai)
-			cur->ai_next = ai;
-	}
-	if (sentinel.ai_next == NULL)
-		switch (h_errno) {
-		case HOST_NOT_FOUND:
-			return NS_NOTFOUND;
-		case TRY_AGAIN:
-			return NS_TRYAGAIN;
-		default:
-			return NS_UNAVAIL;
-		}
-	*((struct addrinfo **)rv) = sentinel.ai_next;
-	return NS_SUCCESS;
-}
-
-static void
-_sethtent()
-{
-	if (!hostf)
-		hostf = fopen(_PATH_HOSTS, "r" );
-	else
-		rewind(hostf);
-}
-
-static void
-_endhtent()
-{
-	if (hostf) {
-		(void) fclose(hostf);
-		hostf = NULL;
-	}
-}
-
-static struct addrinfo *
-_gethtent(name, pai)
-	const char *name;
-	const struct addrinfo *pai;
-{
-	char *p;
-	char *cp, *tname, *cname;
-	struct addrinfo hints, *res0, *res;
-	int error;
-	const char *addr;
-	char hostbuf[8*1024];
-
-	if (!hostf && !(hostf = fopen(_PATH_HOSTS, "r" )))
-		return (NULL);
- again:
-	if (!(p = fgets(hostbuf, sizeof hostbuf, hostf)))
-		return (NULL);
-	if (*p == '#')
-		goto again;
-	if (!(cp = strpbrk(p, "#\n")))
-		goto again;
-	*cp = '\0';
-	if (!(cp = strpbrk(p, " \t")))
-		goto again;
-	*cp++ = '\0';
-	addr = p;
-	cname = NULL;
-	/* if this is not something we're looking for, skip it. */
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		tname = cp;
-		if (cname == NULL)
-			cname = cp;
-		if ((cp = strpbrk(cp, " \t")) != NULL)
-			*cp++ = '\0';
-		if (strcasecmp(name, tname) == 0)
-			goto found;
-	}
-	goto again;
-
-found:
-	hints = *pai;
-	hints.ai_flags = AI_NUMERICHOST;
-	error = getaddrinfo(addr, NULL, &hints, &res0);
-	if (error)
-		goto again;
-#ifdef FILTER_V4MAPPED
-	/* XXX should check all items in the chain */
-	if (res0->ai_family == AF_INET6 &&
-	    IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)res0->ai_addr)->sin6_addr)) {
-		freeaddrinfo(res0);
-		goto again;
-	}
-#endif
-	for (res = res0; res; res = res->ai_next) {
-		/* cover it up */
-		res->ai_flags = pai->ai_flags;
-
-		if (pai->ai_flags & AI_CANONNAME) {
-			if (get_canonname(pai, res, cname) != 0) {
-				freeaddrinfo(res0);
-				goto again;
-			}
-		}
-	}
-	return res0;
-}
-
-/*ARGSUSED*/
-static int
-_files_getaddrinfo(rv, cb_data, ap)
-	void	*rv;
-	void	*cb_data;
-	va_list	 ap;
-{
-	const char *name;
-	const struct addrinfo *pai;
-	struct addrinfo sentinel, *cur;
-	struct addrinfo *p;
-
-	name = va_arg(ap, char *);
-	pai = va_arg(ap, struct addrinfo *);
-
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-
-	_sethtent();
-	while ((p = _gethtent(name, pai)) != NULL) {
-		cur->ai_next = p;
-		while (cur && cur->ai_next)
-			cur = cur->ai_next;
-	}
-	_endhtent();
-
-	*((struct addrinfo **)rv) = sentinel.ai_next;
-	if (sentinel.ai_next == NULL)
-		return NS_NOTFOUND;
-	return NS_SUCCESS;
-}
-
-#ifdef YP
-static char *__ypdomain;
-
-/*ARGSUSED*/
-static struct addrinfo *
-_yphostent(line, pai)
-	char *line;
-	const struct addrinfo *pai;
-{
-	struct addrinfo sentinel, *cur;
-	struct addrinfo hints, *res, *res0;
-	int error;
-	char *p = line;
-	const char *addr, *canonname;
-	char *nextline;
-	char *cp;
-
-	addr = canonname = NULL;
-
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-
-nextline:
-	/* terminate line */
-	cp = strchr(p, '\n');
-	if (cp) {
-		*cp++ = '\0';
-		nextline = cp;
-	} else
-		nextline = NULL;
-
-	cp = strpbrk(p, " \t");
-	if (cp == NULL) {
-		if (canonname == NULL)
-			return (NULL);
-		else
-			goto done;
-	}
-	*cp++ = '\0';
-
-	addr = p;
-
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (!canonname)
-			canonname = cp;
-		if ((cp = strpbrk(cp, " \t")) != NULL)
-			*cp++ = '\0';
-	}
-
-	hints = *pai;
-	hints.ai_flags = AI_NUMERICHOST;
-	error = getaddrinfo(addr, NULL, &hints, &res0);
-	if (error == 0) {
-		for (res = res0; res; res = res->ai_next) {
-			/* cover it up */
-			res->ai_flags = pai->ai_flags;
-
-			if (pai->ai_flags & AI_CANONNAME)
-				(void)get_canonname(pai, res, canonname);
-		}
-	} else
-		res0 = NULL;
-	if (res0) {
-		cur->ai_next = res0;
-		while (cur && cur->ai_next)
-			cur = cur->ai_next;
-	}
-
-	if (nextline) {
-		p = nextline;
-		goto nextline;
-	}
-
-done:
-	return sentinel.ai_next;
-}
-
-/*ARGSUSED*/
-static int
-_yp_getaddrinfo(rv, cb_data, ap)
-	void	*rv;
-	void	*cb_data;
-	va_list	 ap;
-{
-	struct addrinfo sentinel, *cur;
-	struct addrinfo *ai = NULL;
-	static char *__ypcurrent;
-	int __ypcurrentlen, r;
-	const char *name;
-	const struct addrinfo *pai;
-
-	name = va_arg(ap, char *);
-	pai = va_arg(ap, const struct addrinfo *);
-
-	memset(&sentinel, 0, sizeof(sentinel));
-	cur = &sentinel;
-
-	if (!__ypdomain) {
-		if (_yp_check(&__ypdomain) == 0)
-			return NS_UNAVAIL;
-	}
-	if (__ypcurrent)
-		free(__ypcurrent);
-	__ypcurrent = NULL;
-
-	/* hosts.byname is only for IPv4 (Solaris8) */
-	if (pai->ai_family == PF_UNSPEC || pai->ai_family == PF_INET) {
-		r = yp_match(__ypdomain, "hosts.byname", name,
-			(int)strlen(name), &__ypcurrent, &__ypcurrentlen);
-		if (r == 0) {
-			struct addrinfo ai4;
-
-			ai4 = *pai;
-			ai4.ai_family = AF_INET;
-			ai = _yphostent(__ypcurrent, &ai4);
-			if (ai) {
-				cur->ai_next = ai;
-				while (cur && cur->ai_next)
-					cur = cur->ai_next;
-			}
-		}
-	}
-
-	/* ipnodes.byname can hold both IPv4/v6 */
-	r = yp_match(__ypdomain, "ipnodes.byname", name,
-		(int)strlen(name), &__ypcurrent, &__ypcurrentlen);
-	if (r == 0) {
-		ai = _yphostent(__ypcurrent, pai);
-		if (ai) {
-			cur->ai_next = ai;
-			while (cur && cur->ai_next)
-				cur = cur->ai_next;
-		}
-	}
-
-	if (sentinel.ai_next == NULL) {
-		h_errno = HOST_NOT_FOUND;
-		return NS_NOTFOUND;
-	}
-	*((struct addrinfo **)rv) = sentinel.ai_next;
-	return NS_SUCCESS;
-}
-#endif
-
-/* resolver logic */
-
-extern const char *__hostalias(const char *);
-extern int h_errno;
-
-/*
- * Formulate a normal query, send, and await answer.
- * Returned answer is placed in supplied buffer "answer".
- * Perform preliminary check of answer, returning success only
- * if no error is indicated and the answer count is nonzero.
- * Return the size of the response on success, -1 on error.
- * Error number is left in h_errno.
- *
- * Caller must parse answer and determine whether it answers the question.
- */
-static int
-res_queryN(name, target)
-	const char *name;	/* domain name */
-	struct res_target *target;
-{
-	u_char buf[MAXPACKET];
-	HEADER *hp;
-	int n;
-	struct res_target *t;
-	int rcode;
-	int ancount;
-
-	rcode = NOERROR;
-	ancount = 0;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-
-	for (t = target; t; t = t->next) {
-		int class, type;
-		u_char *answer;
-		int anslen;
-
-		hp = (HEADER *)(void *)t->answer;
-		hp->rcode = NOERROR;	/* default */
-
-		/* make it easier... */
-		class = t->qclass;
-		type = t->qtype;
-		answer = t->answer;
-		anslen = t->anslen;
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf(";; res_query(%s, %d, %d)\n", name, class, type);
-#endif
-
-		n = res_mkquery(QUERY, name, class, type, NULL, 0, NULL,
-		    buf, sizeof(buf));
-		if (n > 0 && (_res.options & RES_USE_EDNS0) != 0)
-			n = res_opt(n, buf, sizeof(buf), anslen);
-		if (n <= 0) {
-#ifdef DEBUG
-			if (_res.options & RES_DEBUG)
-				printf(";; res_query: mkquery failed\n");
-#endif
-			h_errno = NO_RECOVERY;
-			return (n);
-		}
-		n = res_send(buf, n, answer, anslen);
-#if 0
-		if (n < 0) {
-#ifdef DEBUG
-			if (_res.options & RES_DEBUG)
-				printf(";; res_query: send error\n");
-#endif
-			h_errno = TRY_AGAIN;
-			return (n);
-		}
-#endif
-
-		if (n < 0 || hp->rcode != NOERROR || ntohs(hp->ancount) == 0) {
-			rcode = hp->rcode;	/* record most recent error */
-#ifdef DEBUG
-			if (_res.options & RES_DEBUG)
-				printf(";; rcode = %d, ancount=%d\n", hp->rcode,
-				    ntohs(hp->ancount));
-#endif
-			continue;
-		}
-
-		ancount += ntohs(hp->ancount);
-
-		t->n = n;
-	}
-
-	if (ancount == 0) {
-		switch (rcode) {
-		case NXDOMAIN:
-			h_errno = HOST_NOT_FOUND;
-			break;
-		case SERVFAIL:
-			h_errno = TRY_AGAIN;
-			break;
-		case NOERROR:
-			h_errno = NO_DATA;
-			break;
-		case FORMERR:
-		case NOTIMP:
-		case REFUSED:
-		default:
-			h_errno = NO_RECOVERY;
-			break;
-		}
-		return (-1);
-	}
-	return (ancount);
-}
-
-/*
- * Formulate a normal query, send, and retrieve answer in supplied buffer.
- * Return the size of the response on success, -1 on error.
- * If enabled, implement search rules until answer or unrecoverable failure
- * is detected.  Error code, if any, is left in h_errno.
- */
-static int
-res_searchN(name, target)
-	const char *name;	/* domain name */
-	struct res_target *target;
-{
-	const char *cp, * const *domain;
-	HEADER *hp = (HEADER *)(void *)target->answer;	/*XXX*/
-	u_int dots;
-	int trailing_dot, ret, saved_herrno;
-	int got_nodata = 0, got_servfail = 0, tried_as_is = 0;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-
-	errno = 0;
-	h_errno = HOST_NOT_FOUND;	/* default, if we never query */
-	dots = 0;
-	for (cp = name; *cp; cp++)
-		dots += (*cp == '.');
-	trailing_dot = 0;
-	if (cp > name && *--cp == '.')
-		trailing_dot++;
-
-	/*
-	 * if there aren't any dots, it could be a user-level alias
-	 */
-	if (!dots && (cp = __hostalias(name)) != NULL)
-		return (res_queryN(cp, target));
-
-	/*
-	 * If there are dots in the name already, let's just give it a try
-	 * 'as is'.  The threshold can be set with the "ndots" option.
-	 */
-	saved_herrno = -1;
-	if (dots >= _res.ndots) {
-		ret = res_querydomainN(name, NULL, target);
-		if (ret > 0)
-			return (ret);
-		saved_herrno = h_errno;
-		tried_as_is++;
-	}
-
-	/*
-	 * We do at least one level of search if
-	 *	- there is no dot and RES_DEFNAME is set, or
-	 *	- there is at least one dot, there is no trailing dot,
-	 *	  and RES_DNSRCH is set.
-	 */
-	if ((!dots && (_res.options & RES_DEFNAMES)) ||
-	    (dots && !trailing_dot && (_res.options & RES_DNSRCH))) {
-		int done = 0;
-
-		for (domain = (const char * const *)_res.dnsrch;
-		   *domain && !done;
-		   domain++) {
-
-			ret = res_querydomainN(name, *domain, target);
-			if (ret > 0)
-				return (ret);
-
-			/*
-			 * If no server present, give up.
-			 * If name isn't found in this domain,
-			 * keep trying higher domains in the search list
-			 * (if that's enabled).
-			 * On a NO_DATA error, keep trying, otherwise
-			 * a wildcard entry of another type could keep us
-			 * from finding this entry higher in the domain.
-			 * If we get some other error (negative answer or
-			 * server failure), then stop searching up,
-			 * but try the input name below in case it's
-			 * fully-qualified.
-			 */
-			if (errno == ECONNREFUSED) {
-				h_errno = TRY_AGAIN;
-				return (-1);
-			}
-
-			switch (h_errno) {
-			case NO_DATA:
-				got_nodata++;
-				/* FALLTHROUGH */
-			case HOST_NOT_FOUND:
-				/* keep trying */
-				break;
-			case TRY_AGAIN:
-				if (hp->rcode == SERVFAIL) {
-					/* try next search element, if any */
-					got_servfail++;
-					break;
-				}
-				/* FALLTHROUGH */
-			default:
-				/* anything else implies that we're done */
-				done++;
-			}
-			/*
-			 * if we got here for some reason other than DNSRCH,
-			 * we only wanted one iteration of the loop, so stop.
-			 */
-			if (!(_res.options & RES_DNSRCH))
-			        done++;
-		}
-	}
-
-	/*
-	 * if we have not already tried the name "as is", do that now.
-	 * note that we do this regardless of how many dots were in the
-	 * name or whether it ends with a dot.
-	 */
-	if (!tried_as_is && (dots || !(_res.options & RES_NOTLDQUERY))) {
-		ret = res_querydomainN(name, NULL, target);
-		if (ret > 0)
-			return (ret);
-	}
-
-	/*
-	 * if we got here, we didn't satisfy the search.
-	 * if we did an initial full query, return that query's h_errno
-	 * (note that we wouldn't be here if that query had succeeded).
-	 * else if we ever got a nodata, send that back as the reason.
-	 * else send back meaningless h_errno, that being the one from
-	 * the last DNSRCH we did.
-	 */
-	if (saved_herrno != -1)
-		h_errno = saved_herrno;
-	else if (got_nodata)
-		h_errno = NO_DATA;
-	else if (got_servfail)
-		h_errno = TRY_AGAIN;
-	return (-1);
-}
-
-/*
- * Perform a call on res_query on the concatenation of name and domain,
- * removing a trailing dot from name if domain is NULL.
- */
-static int
-res_querydomainN(name, domain, target)
-	const char *name, *domain;
-	struct res_target *target;
-{
-	char nbuf[MAXDNAME];
-	const char *longname = nbuf;
-	size_t n, d;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-#ifdef DEBUG
-	if (_res.options & RES_DEBUG)
-		printf(";; res_querydomain(%s, %s)\n",
-			name, domain?domain:"<Nil>");
-#endif
-	if (domain == NULL) {
-		/*
-		 * Check for trailing '.';
-		 * copy without '.' if present.
-		 */
-		n = strlen(name);
-		if (n >= MAXDNAME) {
-			h_errno = NO_RECOVERY;
-			return (-1);
-		}
-		if (n > 0 && name[--n] == '.') {
-			strncpy(nbuf, name, n);
-			nbuf[n] = '\0';
-		} else
-			longname = name;
-	} else {
-		n = strlen(name);
-		d = strlen(domain);
-		if (n + d + 1 >= MAXDNAME) {
-			h_errno = NO_RECOVERY;
-			return (-1);
-		}
-		sprintf(nbuf, "%s.%s", name, domain);
-	}
-	return (res_queryN(longname, target));
-}
diff --git a/newlib/libc/sys/linux/net/gethostbydns.c b/newlib/libc/sys/linux/net/gethostbydns.c
deleted file mode 100644
index 9db8bf4ad..000000000
--- a/newlib/libc/sys/linux/net/gethostbydns.c
+++ /dev/null
@@ -1,815 +0,0 @@
-/*
- * ++Copyright++ 1985, 1988, 1993
- * -
- * Copyright (c) 1985, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)gethostnamadr.c	8.1 (Berkeley) 6/4/93";
-static char fromrcsid[] = "From: Id: gethnamaddr.c,v 8.23 1998/04/07 04:59:46 vixie Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <stdlib.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <stdio.h>
-#include <unistd.h>
-#include <string.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <ctype.h>
-#include <errno.h>
-#include <syslog.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-
-#include "res_config.h"
-
-#define SPRINTF(x) ((size_t)sprintf x)
-
-static const char AskedForGot[] =
-		"gethostby*.gethostanswer: asked for \"%s\", got \"%s\"";
-
-#ifdef RESOLVSORT
-static void addrsort(char **, int);
-#endif
-
-u_int32_t _getlong(const u_char *src);
-u_int16_t _getshort(const u_char *src);
-
-#ifdef DEBUG
-static void dprintf(char *, int);
-#endif
-
-#if PACKETSZ > 1024
-#define	MAXPACKET	PACKETSZ
-#else
-#define	MAXPACKET	1024
-#endif
-
-typedef union {
-    HEADER hdr;
-    u_char buf[MAXPACKET];
-} querybuf;
-
-typedef union {
-    int32_t al;
-    char ac;
-} align;
-
-extern int h_errno;
-int _dns_ttl_;
-
-#ifdef DEBUG
-static void
-dprintf(msg, num)
-	char *msg;
-	int num;
-{
-	if (_res.options & RES_DEBUG) {
-		int save = errno;
-
-		printf(msg, num);
-		errno = save;
-	}
-}
-#else
-# define dprintf(msg, num) /*nada*/
-#endif
-
-#define BOUNDED_INCR(x) \
-	do { \
-		cp += x; \
-		if (cp > eom) { \
-			*herr = NO_RECOVERY; \
-			return (NULL); \
-		} \
-	} while (0)
-
-#define BOUNDS_CHECK(ptr, count) \
-	do { \
-		if ((ptr) + (count) > eom) { \
-			*herr = NO_RECOVERY; \
-			return (NULL); \
-		} \
-	} while (0)
-
-static struct hostent *
-gethostanswer(answer, anslen, qname, qtype, host, hostbuf, hostbuflen, herr)
-	const querybuf *answer;
-	int anslen;
-	const char *qname;
-	int qtype;
-        struct hostent *host;
-        char *hostbuf;
-        int hostbuflen;
-        int *herr;
-{
-	const HEADER *hp;
-	const u_char *cp;
-	int n;
-	const u_char *eom, *erdata;
-	char *bp, **ap, **hap;
-	int type, class, buflen, ancount, qdcount;
-	int haveanswer, had_error;
-	int toobig = 0;
-	char tbuf[MAXDNAME];
-	const char *tname;
-	int (*name_ok)(const char *);
-
-	tname = qname;
-	host->h_name = NULL;
-	eom = answer->buf + anslen;
-	switch (qtype) {
-	case T_A:
-	case T_AAAA:
-		name_ok = res_hnok;
-		break;
-	case T_PTR:
-		name_ok = res_dnok;
-		break;
-	default:
-		*herr = NO_RECOVERY;
-		return (NULL);	/* XXX should be abort(); */
-	}
-	/*
-	 * find first satisfactory answer
-	 */
-	hp = &answer->hdr;
-	ancount = ntohs(hp->ancount);
-	qdcount = ntohs(hp->qdcount);
-	bp = hostbuf;
-	buflen = hostbuflen;
-	cp = answer->buf;
-	BOUNDED_INCR(HFIXEDSZ);
-	if (qdcount != 1) {
-		*herr = NO_RECOVERY;
-		return (NULL);
-	}
-	n = dn_expand(answer->buf, eom, cp, bp, buflen);
-	if ((n < 0) || !(*name_ok)(bp)) {
-		*herr = NO_RECOVERY;
-		return (NULL);
-	}
-	BOUNDED_INCR(n + QFIXEDSZ);
-	if (qtype == T_A || qtype == T_AAAA) {
-		/* res_send() has already verified that the query name is the
-		 * same as the one we sent; this just gets the expanded name
-		 * (i.e., with the succeeding search-domain tacked on).
-		 */
-		n = strlen(bp) + 1;		/* for the \0 */
-		if (n >= MAXHOSTNAMELEN) {
-			*herr = NO_RECOVERY;
-			return (NULL);
-		}
-		host->h_name = bp;
-		bp += n;
-		buflen -= n;
-		/* The qname can be abbreviated, but h_name is now absolute. */
-		qname = host->h_name;
-	}
-	ap = host->__host_aliases;
-	*ap = NULL;
-	host->h_aliases = host->__host_aliases;
-	hap = host->__host_addrs;
-	*hap = NULL;
-	host->h_addr_list = host->__host_addrs;
-	haveanswer = 0;
-	had_error = 0;
-	_dns_ttl_ = -1;
-	while (ancount-- > 0 && cp < eom && !had_error) {
-		n = dn_expand(answer->buf, eom, cp, bp, buflen);
-		if ((n < 0) || !(*name_ok)(bp)) {
-			had_error++;
-			continue;
-		}
-		cp += n;			/* name */
-		BOUNDS_CHECK(cp, 3 * INT16SZ + INT32SZ);
-		type = _getshort(cp);
- 		cp += INT16SZ;			/* type */
-		class = _getshort(cp);
- 		cp += INT16SZ;			/* class */
-		if (qtype == T_A  && type == T_A)
-			_dns_ttl_ = _getlong(cp);
-		cp += INT32SZ;			/* TTL */
-		n = _getshort(cp);
-		cp += INT16SZ;			/* len */
-		BOUNDS_CHECK(cp, n);
-		erdata = cp + n;
-		if (class != C_IN) {
-			/* XXX - debug? syslog? */
-			cp += n;
-			continue;		/* XXX - had_error++ ? */
-		}
-		if ((qtype == T_A || qtype == T_AAAA) && type == T_CNAME) {
-			if (ap >= &host->__host_aliases[MAXALIASES-1])
-				continue;
-			n = dn_expand(answer->buf, eom, cp, tbuf, sizeof tbuf);
-			if ((n < 0) || !(*name_ok)(tbuf)) {
-				had_error++;
-				continue;
-			}
-			cp += n;
-			if (cp != erdata) {
-				*herr = NO_RECOVERY;
-				return (NULL);
-			}
-			/* Store alias. */
-			*ap++ = bp;
-			n = strlen(bp) + 1;	/* for the \0 */
-			if (n >= MAXHOSTNAMELEN) {
-				had_error++;
-				continue;
-			}
-			bp += n;
-			buflen -= n;
-			/* Get canonical name. */
-			n = strlen(tbuf) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN) {
-				had_error++;
-				continue;
-			}
-			strcpy(bp, tbuf);
-			host->h_name = bp;
-			bp += n;
-			buflen -= n;
-			continue;
-		}
-		if (qtype == T_PTR && type == T_CNAME) {
-			n = dn_expand(answer->buf, eom, cp, tbuf, sizeof tbuf);
-			if (n < 0 || !res_dnok(tbuf)) {
-				had_error++;
-				continue;
-			}
-			cp += n;
-			if (cp != erdata) {
-				*herr = NO_RECOVERY;
-				return (NULL);
-			}
-			/* Get canonical name. */
-			n = strlen(tbuf) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN) {
-				had_error++;
-				continue;
-			}
-			strcpy(bp, tbuf);
-			tname = bp;
-			bp += n;
-			buflen -= n;
-			continue;
-		}
-		if (type != qtype) {
-			if (type != T_SIG)
-				syslog(LOG_NOTICE|LOG_AUTH,
-	"gethostby*.gethostanswer: asked for \"%s %s %s\", got type \"%s\"",
-				       qname, p_class(C_IN), p_type(qtype),
-				       p_type(type));
-			cp += n;
-			continue;		/* XXX - had_error++ ? */
-		}
-		switch (type) {
-		case T_PTR:
-			if (strcasecmp(tname, bp) != 0) {
-				syslog(LOG_NOTICE|LOG_AUTH,
-				       AskedForGot, qname, bp);
-				cp += n;
-				continue;	/* XXX - had_error++ ? */
-			}
-			n = dn_expand(answer->buf, eom, cp, bp, buflen);
-			if ((n < 0) || !res_hnok(bp)) {
-				had_error++;
-				break;
-			}
-#if MULTI_PTRS_ARE_ALIASES
-			cp += n;
-			if (cp != erdata) {
-				*herr = NO_RECOVERY;
-				return (NULL);
-			}
-			if (!haveanswer)
-				host->h_name = bp;
-			else if (ap < &host->__host_aliases[MAXALIASES-1])
-				*ap++ = bp;
-			else
-				n = -1;
-			if (n != -1) {
-				n = strlen(bp) + 1;	/* for the \0 */
-				if (n >= MAXHOSTNAMELEN) {
-					had_error++;
-					break;
-				}
-				bp += n;
-				buflen -= n;
-			}
-			break;
-#else
-			host->h_name = bp;
-			if (_res.options & RES_USE_INET6) {
-				n = strlen(bp) + 1;	/* for the \0 */
-				if (n >= MAXHOSTNAMELEN) {
-					had_error++;
-					break;
-				}
-				bp += n;
-				buflen -= n;
-				_map_v4v6_hostent(host, &bp, &buflen);
-			}
-			*herr = NETDB_SUCCESS;
-			return host;
-#endif
-		case T_A:
-		case T_AAAA:
-			if (strcasecmp(host->h_name, bp) != 0) {
-				syslog(LOG_NOTICE|LOG_AUTH,
-				       AskedForGot, host->h_name, bp);
-				cp += n;
-				continue;	/* XXX - had_error++ ? */
-			}
-			if (n != host->h_length) {
-				cp += n;
-				continue;
-			}
-			if (!haveanswer) {
-				int nn;
-
-				host->h_name = bp;
-				nn = strlen(bp) + 1;	/* for the \0 */
-				bp += nn;
-				buflen -= nn;
-			}
-
-			bp += sizeof(align) - ((u_long)bp % sizeof(align));
-
-			if (bp + n >= &hostbuf[hostbuflen]) {
-				dprintf("size (%d) too big\n", n);
-				had_error++;
-				continue;
-			}
-			if (hap >= &host->__host_addrs[MAXADDRS-1]) {
-				if (!toobig++)
-					dprintf("Too many addresses (%d)\n",
-						MAXADDRS);
-				cp += n;
-				continue;
-			}
-			bcopy(cp, *hap++ = bp, n);
-			bp += n;
-			buflen -= n;
-			cp += n;
-			if (cp != erdata) {
-				*herr = NO_RECOVERY;
-				return (NULL);
-			}
-			break;
-		default:
-			dprintf("Impossible condition (type=%d)\n", type);
-			*herr = NO_RECOVERY;
-			return (NULL);
-			/* BIND has abort() here, too risky on bad data */
-		}
-		if (!had_error)
-			haveanswer++;
-	}
-	if (haveanswer) {
-		*ap = NULL;
-		*hap = NULL;
-# if defined(RESOLVSORT)
-		/*
-		 * Note: we sort even if host can take only one address
-		 * in its return structures - should give it the "best"
-		 * address in that case, not some random one
-		 */
-		if (_res.nsort && haveanswer > 1 && qtype == T_A)
-			addrsort(host->__host_addrs, haveanswer);
-# endif /*RESOLVSORT*/
-		if (!host->h_name) {
-			n = strlen(qname) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN)
-				goto no_recovery;
-			strcpy(bp, qname);
-			host->h_name = bp;
-			bp += n;
-			buflen -= n;
-		}
-		if (_res.options & RES_USE_INET6)
-			_map_v4v6_hostent(host, &bp, &buflen);
-		*herr = NETDB_SUCCESS;
-		return host;
-	}
- no_recovery:
-	*herr = NO_RECOVERY;
-	return (NULL);
-}
-
-struct hostent *
-__dns_getanswer(answer, anslen, qname, qtype, host, hostbuf, hostbuflen, herr)
-	const char *answer;
-	int anslen;
-	const char *qname;
-	int qtype;
-        struct hostent *host;
-        char *hostbuf;
-        int hostbuflen;
-        int *herr;
-{
-	switch(qtype) {
-	case T_AAAA:
-		host->h_addrtype = AF_INET6;
-		host->h_length = IN6ADDRSZ;
-		break;
-	case T_A:
-	default:
-		host->h_addrtype = AF_INET;
-		host->h_length = INADDRSZ;
-		break;
-	}
-
-	return(gethostanswer((const querybuf *)answer, anslen, qname, qtype, host, hostbuf, hostbuflen, herr));
-}
-
-int
-_dns_gethostbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *name;
-	int af;
-	querybuf buf;
-	const char *cp;
-	char *bp;
-	int n, size, type, len;
-        struct hostent *resultbuf;
-        char *hostbuf;
-        int buflen;
-        int *herr;
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        hostbuf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		*herr = NETDB_INTERNAL;
-		return NS_UNAVAIL;
-	}
-
-	switch (af) {
-	case AF_INET:
-		size = INADDRSZ;
-		type = T_A;
-		break;
-	case AF_INET6:
-		size = IN6ADDRSZ;
-		type = T_AAAA;
-		break;
-	default:
-		*herr = NETDB_INTERNAL;
-		errno = EAFNOSUPPORT;
-		return NS_UNAVAIL;
-	}
-
-	resultbuf->h_addrtype = af;
-	resultbuf->h_length = size;
-
-	/*
-	 * if there aren't any dots, it could be a user-level alias.
-	 * this is also done in res_query() since we are not the only
-	 * function that looks up host names.
-	 */
-	if (!strchr(name, '.') && (cp = __hostalias(name)))
-		name = cp;
-
-	/*
-	 * disallow names consisting only of digits/dots, unless
-	 * they end in a dot.
-	 */
-	if (isdigit((unsigned char)name[0]))
-		for (cp = name;; ++cp) {
-			if (!*cp) {
-				if (*--cp == '.')
-					break;
-				/*
-				 * All-numeric, no dot at the end.
-				 * Fake up a hostent as if we'd actually
-				 * done a lookup.
-				 */
-				if (inet_pton(af, name, resultbuf->__host_addr) <= 0) {
-					*herr = HOST_NOT_FOUND;
-					return NS_NOTFOUND;
-				}
-				strncpy(hostbuf, name, MAXDNAME);
-				hostbuf[MAXDNAME] = '\0';
-				bp = hostbuf + MAXDNAME;
-				len = buflen - MAXDNAME;
-				resultbuf->h_name = hostbuf;
-				resultbuf->h_aliases = resultbuf->__host_aliases;
-				resultbuf->__host_aliases[0] = NULL;
-				resultbuf->__host_addrs[0] = (char *)resultbuf->__host_addr;
-				resultbuf->__host_addrs[1] = NULL;
-				resultbuf->h_addr_list = resultbuf->__host_addrs;
-				if (_res.options & RES_USE_INET6)
-					_map_v4v6_hostent(resultbuf, &bp, &len);
-				*herr = NETDB_SUCCESS;
-				*(struct hostent **)rval = resultbuf;
-				return NS_SUCCESS;
-			}
-			if (!isdigit((unsigned char)*cp) && *cp != '.')
-				break;
-		}
-	if ((isxdigit((unsigned char)name[0]) && strchr(name, ':') != NULL) ||
-	    name[0] == ':')
-		for (cp = name;; ++cp) {
-			if (!*cp) {
-				if (*--cp == '.')
-					break;
-				/*
-				 * All-IPv6-legal, no dot at the end.
-				 * Fake up a hostent as if we'd actually
-				 * done a lookup.
-				 */
-				if (inet_pton(af, name, resultbuf->__host_addr) <= 0) {
-					*herr = HOST_NOT_FOUND;
-					return NS_NOTFOUND;
-				}
-				strncpy(hostbuf, name, MAXDNAME);
-				hostbuf[MAXDNAME] = '\0';
-				bp = hostbuf + MAXDNAME;
-				len = buflen - MAXDNAME;
-				resultbuf->h_name = hostbuf;
-				resultbuf->h_aliases = resultbuf->__host_aliases;
-				resultbuf->__host_aliases[0] = NULL;
-				resultbuf->__host_addrs[0] = (char *)resultbuf->__host_addr;
-				resultbuf->__host_addrs[1] = NULL;
-				resultbuf->h_addr_list = resultbuf->__host_addrs;
-				*herr = NETDB_SUCCESS;
-				*(struct hostent **)rval = resultbuf;
-				return NS_SUCCESS;
-			}
-			if (!isxdigit((unsigned char)*cp) && *cp != ':' && *cp != '.')
-				break;
-		}
-
-	if ((n = res_search(name, C_IN, type, buf.buf, sizeof(buf))) < 0) {
-		dprintf("res_search failed (%d)\n", n);
-		return NS_UNAVAIL;
-	}
-	*(struct hostent **)rval = gethostanswer(&buf, n, name, type, resultbuf, hostbuf, buflen, herr);
-	return (*(struct hostent **)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-int
-_dns_gethostbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	const char *addr;	/* XXX should have been def'd as u_char! */
-	int len, af;
-	const u_char *uaddr;
-	static const u_char mapped[] = { 0,0, 0,0, 0,0, 0,0, 0,0, 0xff,0xff };
-	static const u_char tunnelled[] = { 0,0, 0,0, 0,0, 0,0, 0,0, 0,0 };
-	int n, size;
-	querybuf buf;
-	struct hostent *hp;
-	char qbuf[MAXDNAME+1], *qp;
-#ifdef SUNSECURITY
-	struct hostent *rhp;
-	char **haddr;
-	u_long old_options;
-	char hname2[MAXDNAME+1];
-#endif /*SUNSECURITY*/
-        struct hostent *resultbuf;
-        char *hostbuf;
-        int buflen;
-        int *herr;
-
-	addr = va_arg(ap, const char *);
-	uaddr = (const u_char *)addr;
-	len = va_arg(ap, int);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        hostbuf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		*herr = NETDB_INTERNAL;
-		return NS_UNAVAIL;
-	}
-	if (af == AF_INET6 && len == IN6ADDRSZ &&
-	    (!memcmp(uaddr, mapped, sizeof mapped) ||
-	     !memcmp(uaddr, tunnelled, sizeof tunnelled))) {
-		/* Unmap. */
-		addr += sizeof mapped;
-		uaddr += sizeof mapped;
-		af = AF_INET;
-		len = INADDRSZ;
-	}
-	switch (af) {
-	case AF_INET:
-		size = INADDRSZ;
-		break;
-	case AF_INET6:
-		size = IN6ADDRSZ;
-		break;
-	default:
-		errno = EAFNOSUPPORT;
-		*herr = NETDB_INTERNAL;
-		return NS_UNAVAIL;
-	}
-	if (size != len) {
-		errno = EINVAL;
-		*herr = NETDB_INTERNAL;
-		return NS_UNAVAIL;
-	}
-	switch (af) {
-	case AF_INET:
-		(void) sprintf(qbuf, "%u.%u.%u.%u.in-addr.arpa",
-			       (uaddr[3] & 0xff),
-			       (uaddr[2] & 0xff),
-			       (uaddr[1] & 0xff),
-			       (uaddr[0] & 0xff));
-		break;
-	case AF_INET6:
-		qp = qbuf;
-		for (n = IN6ADDRSZ - 1; n >= 0; n--) {
-			qp += SPRINTF((qp, "%x.%x.",
-				       uaddr[n] & 0xf,
-				       (uaddr[n] >> 4) & 0xf));
-		}
-		strcpy(qp, "ip6.int");
-		break;
-	default:
-		abort();
-	}
-	n = res_query(qbuf, C_IN, T_PTR, (u_char *)buf.buf, sizeof buf.buf);
-	if (n < 0) {
-		dprintf("res_query failed (%d)\n", n);
-		return NS_UNAVAIL;
-	}
-	if (n > sizeof buf.buf) {
-		dprintf("static buffer is too small (%d)\n", n);
-		return NS_UNAVAIL;
-	}
-	if (!(hp = gethostanswer(&buf, n, qbuf, T_PTR, resultbuf, hostbuf, buflen, herr)))
-		return NS_NOTFOUND;   /* *herr was set by gethostanswer() */
-#ifdef SUNSECURITY
-	if (af == AF_INET) {
-	    /*
-	     * turn off search as the name should be absolute,
-	     * 'localhost' should be matched by defnames
-	     */
-	    strncpy(hname2, hp->h_name, MAXDNAME);
-	    hname2[MAXDNAME] = '\0';
-	    old_options = _res.options;
-	    _res.options &= ~RES_DNSRCH;
-	    _res.options |= RES_DEFNAMES;
-	    if (!(rhp = gethostbyname(hname2))) {
-		syslog(LOG_NOTICE|LOG_AUTH,
-		       "gethostbyaddr: No A record for %s (verifying [%s])",
-		       hname2, inet_ntoa(*((struct in_addr *)addr)));
-		_res.options = old_options;
-		*herr = HOST_NOT_FOUND;
-		return NS_NOTFOUND;
-	    }
-	    _res.options = old_options;
-	    for (haddr = rhp->h_addr_list; *haddr; haddr++)
-		if (!memcmp(*haddr, addr, INADDRSZ))
-			break;
-	    if (!*haddr) {
-		syslog(LOG_NOTICE|LOG_AUTH,
-		       "gethostbyaddr: A record of %s != PTR record [%s]",
-		       hname2, inet_ntoa(*((struct in_addr *)addr)));
-		*herr = HOST_NOT_FOUND;
-		return NS_NOTFOUND;
-	    }
-	}
-#endif /*SUNSECURITY*/
-	hp->h_addrtype = af;
-	hp->h_length = len;
-	bcopy(addr, resultbuf->__host_addr, len);
-	resultbuf->__host_addrs[0] = (char *)resultbuf->__host_addr;
-	resultbuf->__host_addrs[1] = NULL;
-	if (af == AF_INET && (_res.options & RES_USE_INET6)) {
-		_map_v4v6_address((char*)resultbuf->__host_addr, (char*)resultbuf->__host_addr);
-		hp->h_addrtype = AF_INET6;
-		hp->h_length = IN6ADDRSZ;
-	}
-	*herr = NETDB_SUCCESS;
-	*(struct hostent **)rval = hp;
-	return (hp != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-#ifdef RESOLVSORT
-static void
-addrsort(ap, num)
-	char **ap;
-	int num;
-{
-	int i, j;
-	char **p;
-	short aval[MAXADDRS];
-	int needsort = 0;
-
-	p = ap;
-	for (i = 0; i < num; i++, p++) {
-	    for (j = 0 ; (unsigned)j < _res.nsort; j++)
-		if (_res.sort_list[j].addr.s_addr == 
-		    (((struct in_addr *)(*p))->s_addr & _res.sort_list[j].mask))
-			break;
-	    aval[i] = j;
-	    if (needsort == 0 && i > 0 && j < aval[i-1])
-		needsort = i;
-	}
-	if (!needsort)
-	    return;
-
-	while (needsort < num) {
-	    for (j = needsort - 1; j >= 0; j--) {
-		if (aval[j] > aval[j+1]) {
-		    char *hp;
-
-		    i = aval[j];
-		    aval[j] = aval[j+1];
-		    aval[j+1] = i;
-
-		    hp = ap[j];
-		    ap[j] = ap[j+1];
-		    ap[j+1] = hp;
-
-		} else
-		    break;
-	    }
-	    needsort++;
-	}
-}
-#endif
-void
-_sethostdnsent(stayopen)
-	int stayopen;
-{
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1)
-		return;
-	if (stayopen)
-		_res.options |= RES_STAYOPEN | RES_USEVC;
-}
-
-void
-_endhostdnsent()
-{
-	_res.options &= ~(RES_STAYOPEN | RES_USEVC);
-	res_close();
-}
diff --git a/newlib/libc/sys/linux/net/gethostbyht.c b/newlib/libc/sys/linux/net/gethostbyht.c
deleted file mode 100644
index 4a15293dd..000000000
--- a/newlib/libc/sys/linux/net/gethostbyht.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*-
- * Copyright (c) 1985, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)gethostnamadr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#include <arpa/nameser.h>	/* XXX */
-#include <resolv.h>		/* XXX */
-#include <dirent.h>
-#include <stdlib.h>
-#include <errno.h>
-
-static FILE *hostf = NULL;
-static int stayopen = 0;
-__LOCK_INIT(static, host_lock);
-
-void
-_sethosthtent_r(int f, FILE **hostfile, int *hstayopen)
-{
-	if (!*hostfile)
-		*hostfile = fopen(_PATH_HOSTS, "r" );
-	else
-		rewind(*hostfile);
-	*hstayopen = f;
-}
-
-void
-_endhosthtent_r(FILE **hostfile, int *hstayopen)
-{
-	if (*hostfile && !*hstayopen) {
-		(void) fclose(*hostfile);
-		*hostfile = NULL;
-	}
-}
-
-void
-_sethosthtent(f)
-	int f;
-{
-  _sethosthtent_r(f, &hostf, &stayopen);
-}
-
-void
-_endhosthtent()
-{
-  _endhosthtent_r(&hostf, &stayopen);
-}
-
-struct hostent *
-gethostent()
-{
-  static struct hostent hp;
-  static char buffer[BUFSIZ+1];
-  static int len = BUFSIZ;
-  static int herr;
-
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(host_lock);
-#endif
-  gethostent_r(&hp, buffer, len, &herr, &hostf);
-#ifdef HAVE_DD_LOCK
-  __lock_release(host_lock);
-#endif
-  return &hp;
-}
-
-int
-gethostent_r(struct hostent *hp, char *buffer, int buflen, int *herr, FILE **hostfile)
-{
-	char *p;
-	char *cp, **q;
-	int af, len;
-
-	if (!*hostfile && !(*hostfile = fopen(_PATH_HOSTS, "r" ))) {
-		*herr = NETDB_INTERNAL;
-		return -1;
-	}
- again:
-	if (!(p = fgets(buffer, buflen, *hostfile))) {
-		*herr = HOST_NOT_FOUND;
-		return -1;
-	}
-	if (*p == '#')
-		goto again;
-	if (!(cp = strpbrk(p, "#\n")))
-		goto again;
-	*cp = '\0';
-	if (!(cp = strpbrk(p, " \t")))
-		goto again;
-	*cp++ = '\0';
-
-        hp->h_addr_list = hp->__host_addrs;
-        hp->__host_addrs[0] = (char *)hp->__host_addr;
-
-	if (inet_pton(AF_INET6, p, hp->h_addr_list[0]) > 0) {
-		af = AF_INET6;
-		len = IN6ADDRSZ;
-	} else if (inet_pton(AF_INET, p, hp->h_addr_list[0]) > 0) {
-		if (_res.options & RES_USE_INET6) {
-			_map_v4v6_address(hp->h_addr_list[0], hp->h_addr_list[0]);
-			af = AF_INET6;
-			len = IN6ADDRSZ;
-		} else {
-			af = AF_INET;
-			len = INADDRSZ;
-		}
-	} else {
-		goto again;
-	}
-
-        
-	hp->h_addr_list[1] = NULL;
-        hp->h_addr = hp->__host_addrs[0];
-	hp->h_length = len;
-	hp->h_addrtype = af;
-
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	hp->h_name = cp;
-	q = hp->h_aliases = hp->__host_aliases;
-        if ((cp = strpbrk(cp, " \t")) != NULL)
-          *cp++ = '\0';
-        while (cp && *cp) {
-          if (*cp == ' ' || *cp == '\t') {
-            cp++;
-            continue;
-          }
-          if (q < &hp->h_aliases[MAXALIASES - 1])
-            *q++ = cp;
-          if ((cp = strpbrk(cp, " \t")) != NULL)
-            *cp++ = '\0';
-        }
-        *q = NULL;
-
-	*herr = NETDB_SUCCESS;
-	return 0;
-}
-
-int
-_ht_gethostbyname(void *rval, void *cb_data, va_list ap) 
-{
-	char **cp;
-	const char *name;
-	int af;
-        struct hostent *resultbuf;
-        char *buf;
-        int buflen;
-        int *herr;
-        FILE *hostfile = NULL;
-        int stayopen;
-        int p;
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        buf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-	sethostent_r(0, &hostfile, &stayopen);
-	while ((p = gethostent_r(resultbuf, buf, buflen, herr, &hostfile)) != -1) {
-		if (resultbuf->h_addrtype != af)
-			continue;
-		if (strcasecmp(resultbuf->h_name, name) == 0)
-			break;
-                for (cp = resultbuf->h_aliases; *cp != 0; cp++)
-                  if (strcasecmp(*cp, name) == 0)
-                    goto found;
-	}
-found:
-	endhostent_r(&hostfile, &stayopen);
-
-        if (p == -1)
-          {
-            *(struct hostent **)rval = NULL;
-            return NS_NOTFOUND;
-            }
-        else
-          {
-            *(struct hostent **)rval = resultbuf;
-            return NS_SUCCESS;
-          }
-}
-
-int 
-_ht_gethostbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	const char *addr;
-	int len, af;
-        struct hostent *resultbuf;
-        char *buf;
-        int buflen;
-        int *herr;
-        FILE *hostfile = NULL;
-        int stayopen;
-        int p;
-
-	addr = va_arg(ap, const char *);
-	len = va_arg(ap, int);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        buf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-	sethostent_r(0, &hostfile, &stayopen);
-	while ((p = gethostent_r(resultbuf, buf, buflen, herr, &hostfile)) != -1)
-		if (resultbuf->h_addrtype == af && !memcmp(resultbuf->h_addr, addr, len))
-			break;
-	endhostent_r(&hostfile, &stayopen);
-
-        if (p == -1)
-          {
-            *(struct hostent **)rval = NULL;
-            return NS_NOTFOUND;
-            }
-        else
-          {
-            *(struct hostent **)rval = resultbuf;
-            return NS_SUCCESS;
-          }
-}
diff --git a/newlib/libc/sys/linux/net/gethostbyname.3 b/newlib/libc/sys/linux/net/gethostbyname.3
deleted file mode 100644
index 51ed2f864..000000000
--- a/newlib/libc/sys/linux/net/gethostbyname.3
+++ /dev/null
@@ -1,380 +0,0 @@
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)gethostbyname.3	8.4 (Berkeley) 5/25/95
-.\" $FreeBSD: src/lib/libc/net/gethostbyname.3,v 1.26 2002/01/14 16:59:00 ru Exp $
-.\"
-.Dd May 25, 1995
-.Dt GETHOSTBYNAME 3
-.Os
-.Sh NAME
-.Nm gethostbyname ,
-.Nm gethostbyname2 ,
-.Nm gethostbyaddr ,
-.Nm gethostent ,
-.Nm sethostent ,
-.Nm endhostent ,
-.Nm herror ,
-.Nm hstrerror
-.Nd get network host entry
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In netdb.h
-.Vt extern int h_errno ;
-.Ft struct hostent *
-.Fn gethostbyname "const char *name"
-.Ft struct hostent *
-.Fn gethostbyname2 "const char *name" "int af"
-.Ft struct hostent *
-.Fn gethostbyaddr "const char *addr" "int len" "int type"
-.Ft struct hostent *
-.Fn gethostent void
-.Ft void
-.Fn sethostent "int stayopen"
-.Ft void
-.Fn endhostent void
-.Ft void
-.Fn herror "const char *string"
-.Ft const char *
-.Fn hstrerror "int err"
-.Sh DESCRIPTION
-.Bf -symbolic
-The
-.Xr getaddrinfo 3
-and
-.Xr getnameinfo 3
-functions are preferred over the
-.Fn gethostbyname ,
-.Fn gethostbyname2 ,
-and
-.Fn gethostbyaddr
-functions.
-.Ef
-.Pp
-The
-.Fn gethostbyname ,
-.Fn gethostbyname2
-and
-.Fn gethostbyaddr
-functions
-each return a pointer to an object with the
-following structure describing an internet host
-referenced by name or by address, respectively.
-.Pp
-The
-.Fa name
-parameter passed to
-.Fn gethostbyname
-or
-.Fn gethostbyname2
-should point to a
-.Dv NUL Ns -terminated
-hostname.
-The
-.Fa addr
-parameter passed to
-.Fn gethostbyaddr
-should point to an address which is
-.Fa len
-bytes long,
-in binary form
-(i.e. not an IP address in human readable
-.Tn ASCII
-form).
-The
-.Fa type
-parameter specifies the address family
-(e.g.\&
-.Dv AF_INET , AF_INET6 ,
-etc.) of this address.
-.Pp
-The structure returned contains either the information obtained from the name
-server,
-.Xr named 8 ,
-broken-out fields from a line in
-.Pa /etc/hosts ,
-or database entries supplied by the
-.Xr yp 8
-system.
-The order of the lookups is controlled by the
-.Sq hosts
-entry in
-.Xr nsswitch.conf 5 .
-.Bd -literal
-struct	hostent {
-	char	*h_name;	/* official name of host */
-	char	**h_aliases;	/* alias list */
-	int	h_addrtype;	/* host address type */
-	int	h_length;	/* length of address */
-	char	**h_addr_list;	/* list of addresses from name server */
-};
-#define	h_addr  h_addr_list[0]	/* address, for backward compatibility */
-.Ed
-.Pp
-The members of this structure are:
-.Bl -tag -width h_addr_list
-.It Va h_name
-Official name of the host.
-.It Va h_aliases
-A
-.Dv NULL Ns -terminated
-array of alternate names for the host.
-.It Va h_addrtype
-The type of address being returned; usually
-.Dv AF_INET .
-.It Va h_length
-The length, in bytes, of the address.
-.It Va h_addr_list
-A
-.Dv NULL Ns -terminated
-array of network addresses for the host.
-Host addresses are returned in network byte order.
-.It Va h_addr
-The first address in
-.Va h_addr_list ;
-this is for backward compatibility.
-.El
-.Pp
-When using the nameserver,
-.Fn gethostbyname
-and
-.Fn gethostbyname2
-will search for the named host in the current domain and its parents
-unless the name ends in a dot.
-If the name contains no dot, and if the environment variable
-.Dq Ev HOSTALIASES
-contains the name of an alias file, the alias file will first be searched
-for an alias matching the input name.
-See
-.Xr hostname 7
-for the domain search procedure and the alias file format.
-.Pp
-The
-.Fn gethostbyname2
-function is an evolution of
-.Fn gethostbyname
-which is intended to allow lookups in address families other than
-.Dv AF_INET ,
-for example
-.Dv AF_INET6 .
-.Pp
-The
-.Fn sethostent
-function
-may be used to request the use of a connected
-.Tn TCP
-socket for queries.
-If the
-.Fa stayopen
-flag is non-zero,
-this sets the option to send all queries to the name server using
-.Tn TCP
-and to retain the connection after each call to
-.Fn gethostbyname ,
-.Fn gethostbyname2
-or
-.Fn gethostbyaddr .
-Otherwise, queries are performed using
-.Tn UDP
-datagrams.
-.Pp
-The
-.Fn endhostent
-function
-closes the
-.Tn TCP
-connection.
-.Pp
-The
-.Fn herror
-function writes a message to the diagnostic output consisting of the
-string parameter
-.Fa s ,
-the constant string
-.Qq Li ":\ " ,
-and a message corresponding to the value of
-.Va h_errno .
-.Pp
-The
-.Fn hstrerror
-function returns a string which is the message text corresponding to the
-value of the
-.Fa err
-parameter.
-.Sh FILES
-.Bl -tag -width /etc/nsswitch.conf -compact
-.It Pa /etc/hosts
-.It Pa /etc/nsswitch.conf
-.It Pa /etc/resolv.conf
-.El
-.Sh EXAMPLES
-Print out the hostname associated with a specific IP address:
-.Bd -literal -offset indent
-const char *ipstr = "127.0.0.1";
-struct in_addr ip;
-struct hostent *hp;
-
-if (!inet_aton(ipstr, &ip))
-	errx(1, "can't parse IP address %s", ipstr);
-
-if ((hp = gethostbyaddr((const char *)&ip,
-    sizeof ip, AF_INET)) == NULL)
-	errx(1, "no name associated with %s", ipstr);
-
-printf("name associated with %s is %s\en", ipstr, hp->h_name);
-.Ed
-.Sh DIAGNOSTICS
-Error return status from
-.Fn gethostbyname ,
-.Fn gethostbyname2
-and
-.Fn gethostbyaddr
-is indicated by return of a
-.Dv NULL
-pointer.
-The external integer
-.Va h_errno
-may then be checked to see whether this is a temporary failure
-or an invalid or unknown host.
-The routine
-.Fn herror
-can be used to print an error message describing the failure.
-If its argument
-.Fa string
-is
-.Pf non- Dv NULL ,
-it is printed, followed by a colon and a space.
-The error message is printed with a trailing newline.
-.Pp
-The variable
-.Va h_errno
-can have the following values:
-.Bl -tag -width HOST_NOT_FOUND
-.It Dv HOST_NOT_FOUND
-No such host is known.
-.It Dv TRY_AGAIN
-This is usually a temporary error
-and means that the local server did not receive
-a response from an authoritative server.
-A retry at some later time may succeed.
-.It Dv NO_RECOVERY
-Some unexpected server failure was encountered.
-This is a non-recoverable error.
-.It Dv NO_DATA
-The requested name is valid but does not have an IP address;
-this is not a temporary error.
-This means that the name is known to the name server but there is no address
-associated with this name.
-Another type of request to the name server using this domain name
-will result in an answer;
-for example, a mail-forwarder may be registered for this domain.
-.El
-.Sh SEE ALSO
-.Xr getaddrinfo 3 ,
-.Xr getnameinfo 3 ,
-.Xr inet_aton 3 ,
-.Xr resolver 3 ,
-.Xr hosts 5 ,
-.Xr hostname 7 ,
-.Xr named 8
-.Sh CAVEAT
-The
-.Fn gethostent
-function
-is defined, and
-.Fn sethostent
-and
-.Fn endhostent
-are redefined,
-when
-.Xr libc 3
-is built to use only the routines to lookup in
-.Pa /etc/hosts
-and not the name server.
-.Pp
-The
-.Fn gethostent
-function
-reads the next line of
-.Pa /etc/hosts ,
-opening the file if necessary.
-.Pp
-The
-.Fn sethostent
-function
-opens and/or rewinds the file
-.Pa /etc/hosts .
-If the
-.Fa stayopen
-argument is non-zero,
-the file will not be closed after each call to
-.Fn gethostbyname ,
-.Fn gethostbyname2
-or
-.Fn gethostbyaddr .
-.Pp
-The
-.Fn endhostent
-function
-closes the file.
-.Sh HISTORY
-The
-.Fn herror
-function appeared in
-.Bx 4.3 .
-The
-.Fn endhostent ,
-.Fn gethostbyaddr ,
-.Fn gethostbyname ,
-.Fn gethostent ,
-and
-.Fn sethostent
-functions appeared in
-.Bx 4.2 .
-The
-.Fn gethostbyname2
-function first appeared in
-.Tn BIND
-version 4.9.4.
-.Sh BUGS
-These functions use static data storage;
-if the data is needed for future use, it should be
-copied before any subsequent calls overwrite it.
-Only the Internet
-address format is currently understood.
-.Pp
-.Fn gethostbyname2
-cannot perform
-.Dv AF_INET6
-lookups over NIS.
-.Xr getaddrinfo 3
-must be used instead.
diff --git a/newlib/libc/sys/linux/net/gethostbynis.c b/newlib/libc/sys/linux/net/gethostbynis.c
deleted file mode 100644
index 917e9409d..000000000
--- a/newlib/libc/sys/linux/net/gethostbynis.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*-
- * Copyright (c) 1994, Garrett Wollman
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <errno.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#ifdef YP
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-#endif
-
-#ifdef YP
-static char *host_aliases[MAXALIASES];
-static char hostaddr[MAXADDRS];
-static char *host_addrs[2];
-
-static struct hostent *
-_gethostbynis(name, map, af)
-	const char *name;
-	char *map;
-	int af;
-{
-	char *cp, **q;
-	char *result;
-	int resultlen,size;
-	static struct hostent h;
-	static char *domain = (char *)NULL;
-	static char ypbuf[YPMAXRECORD + 2];
-
-	switch(af) {
-	case AF_INET:
-		size = NS_INADDRSZ;
-		break;
-	default:
-	case AF_INET6:
-		size = NS_IN6ADDRSZ;
-		errno = EAFNOSUPPORT;
-		h_errno = NETDB_INTERNAL;
-		return NULL;
-	}
-
-	if (domain == (char *)NULL)
-		if (yp_get_default_domain (&domain)) {
-			h_errno = NETDB_INTERNAL;
-			return ((struct hostent *)NULL);
-		}
-
-	if (yp_match(domain, map, name, strlen(name), &result, &resultlen)) {
-		h_errno = HOST_NOT_FOUND;
-		return ((struct hostent *)NULL);
-	}
-
-	/* avoid potential memory leak */
-	bcopy((char *)result, (char *)&ypbuf, resultlen);
-	ypbuf[resultlen] = '\0';
-	free(result);
-	result = (char *)&ypbuf;
-
-	if ((cp = index(result, '\n')))
-		*cp = '\0';
-
-	cp = strpbrk(result, " \t");
-	*cp++ = '\0';
-	h.h_addr_list = host_addrs;
-	h.h_addr = hostaddr;
-	*((u_long *)h.h_addr) = inet_addr(result);
-	h.h_length = size;
-	h.h_addrtype = AF_INET;
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	h.h_name = cp;
-	q = h.h_aliases = host_aliases;
-	cp = strpbrk(cp, " \t");
-	if (cp != NULL)
-		*cp++ = '\0';
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &host_aliases[MAXALIASES - 1])
-			*q++ = cp;
-		cp = strpbrk(cp, " \t");
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-	*q = NULL;
-	return (&h);
-}
-
-static struct hostent *
-_gethostbynis_r(name, map, af, hp, buffer, buflen, herr)
-	const char *name;
-	char *map;
-	int af;
-        struct hostent *hp;
-        char *buffer;
-        int buflen;
-        int *herr;
-{
-	char *cp, **q;
-	char *result;
-	int resultlen,size;
-	char *domain = (char *)NULL;
-
-	switch(af) {
-	case AF_INET:
-		size = NS_INADDRSZ;
-		break;
-	default:
-	case AF_INET6:
-		size = NS_IN6ADDRSZ;
-		errno = EAFNOSUPPORT;
-		*herr = NETDB_INTERNAL;
-		return NULL;
-	}
-
-	if (domain == (char *)NULL)
-		if (yp_get_default_domain (&domain)) {
-			*herr = NETDB_INTERNAL;
-			return ((struct hostent *)NULL);
-		}
-
-	if (yp_match(domain, map, name, strlen(name), &result, &resultlen)) {
-		*herr = HOST_NOT_FOUND;
-		return ((struct hostent *)NULL);
-	}
-
-	/* avoid potential memory leak */
-	bcopy((char *)result, buffer, resultlen);
-	buffer[resultlen] = '\0';
-	free(result);
-	result = buffer;
-
-	if ((cp = index(result, '\n')))
-		*cp = '\0';
-
-	cp = strpbrk(result, " \t");
-	*cp++ = '\0';
-	*((u_long *)hp->__host_addrs[0]) = inet_addr(result);
-        hp->__host_addrs[1] = NULL;
-	hp->h_addr_list = hp->__host_addrs;
-	hp->h_addr = hp->__host_addrs[0];
-	hp->h_length = size;
-	hp->h_addrtype = AF_INET;
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	hp->h_name = cp;
-	q = hp->__host_aliases;
-	cp = strpbrk(cp, " \t");
-	if (cp != NULL)
-		*cp++ = '\0';
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &hp->__host_aliases[MAXALIASES - 1])
-			*q++ = cp;
-		cp = strpbrk(cp, " \t");
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-        hp->h_aliases = hp->__host_aliases;
-	*q = NULL;
-	return (&hp);
-}
-#endif /* YP */
-
-/* XXX _gethostbynisname/_gethostbynisaddr only used by getaddrinfo */
-struct hostent *
-_gethostbynisname(const char *name, int af)
-{
-#ifdef YP
-	return _gethostbynis(name, "hosts.byname", af);
-#else
-	return NULL;
-#endif
-}
-
-struct hostent *
-_gethostbynisaddr(const char *addr, int len, int af)
-{
-#ifdef YP
-	return _gethostbynis(inet_ntoa(*(struct in_addr *)addr), 
-			     "hosts.byaddr", af);
-#else
-	return NULL;
-#endif
-}
-
-
-int
-_nis_gethostbyname(void *rval, void *cb_data, va_list ap)
-{
-#ifdef YP
-	const char *name;
-	int af;
-        struct hostent *resultbuf;
-        char *buf;
-        int buflen;
-        int *herr;
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        buf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-        *(struct hostent **)rval = _gethostbynis_r(name, "hosts.byname", af, resultbuf, buf, buflen, herr);
-
-        return (*(struct hostent **)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-#else
-	return NS_UNAVAIL;
-#endif
-}
-
-int
-_nis_gethostbyaddr(void *rval, void *cb_data, va_list ap)
-{
-#ifdef YP
-	const char *addr;
-	int len;
-	int af;
-        struct hostent *resultbuf;
-        char *buf;
-        int buflen;
-        int *herr;
-
-	addr = va_arg(ap, const char *);
-	len = va_arg(ap, int);
-	af = va_arg(ap, int);
-        resultbuf = va_arg(ap, struct hostent *);
-        buf = va_arg(ap, char *);
-        buflen = va_arg(ap, int);
-        herr = va_arg(ap, int *);
-
-	*(struct hostent **)rval = _gethostbynis_r(inet_ntoa(*(struct in_addr *)addr),"hosts.byaddr", af);
-        return (*(struct hostent **)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-#else
-	return NS_UNAVAIL;
-#endif
-}
diff --git a/newlib/libc/sys/linux/net/gethostnamadr.c b/newlib/libc/sys/linux/net/gethostnamadr.c
deleted file mode 100644
index de1efd8ed..000000000
--- a/newlib/libc/sys/linux/net/gethostnamadr.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*-
- * Copyright (c) 1994, Garrett Wollman
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#include <arpa/nameser.h>		/* XXX hack for _res */
-#include <resolv.h>			/* XXX hack for _res */
-#include <dirent.h>
-
-extern int _ht_gethostbyname(void *, void *, va_list);
-extern int _dns_gethostbyname(void *, void *, va_list);
-extern int _nis_gethostbyname(void *, void *, va_list);
-extern int _ht_gethostbyaddr(void *, void *, va_list);
-extern int _dns_gethostbyaddr(void *, void *, va_list);
-extern int _nis_gethostbyaddr(void *, void *, va_list);
-
-/* Host lookup order if nsswitch.conf is broken or nonexistant */
-static const ns_src default_src[] = { 
-	{ NSSRC_FILES, NS_SUCCESS },
-	{ NSSRC_DNS, NS_SUCCESS },
-	{ 0 }
-};
-
-__LOCK_INIT(static, name_lock);
-__LOCK_INIT(static, addr_lock);
-
-struct hostent *
-gethostbyname(const char *name)
-{
-  struct hostent *hp = NULL;
-
-  if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-    h_errno = NETDB_INTERNAL;
-    return (NULL);
-  }
-  if (_res.options & RES_USE_INET6) {		/* XXX */
-    hp = gethostbyname2(name, AF_INET6);	/* XXX */
-    if (hp)					/* XXX */
-      return (hp);			        /* XXX */
-  }						/* XXX */
-  return (gethostbyname2(name, AF_INET));
-}
-
-struct hostent *
-gethostbyname2(const char *name, int type)
-{
-  static struct hostent host, *hp;
-  static char hostbuf[BUFSIZ];
-  static int herr;
-  int rval;
-
-  static const ns_dtab dtab[] = {
-    NS_FILES_CB(_ht_gethostbyname, NULL)
-    { NSSRC_DNS, _dns_gethostbyname, NULL },
-    NS_NIS_CB(_nis_gethostbyname, NULL) /* force -DHESIOD */
-    { 0 }
-  };
-
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(name_lock);
-#endif
-  rval = nsdispatch((void *)&hp, dtab, NSDB_HOSTS, "gethostbyname",
-                    default_src, name, type, &host, hostbuf, BUFSIZ, &herr);
-
-#ifdef HAVE_DD_LOCK
-  __lock_release(name_lock);
-#endif
-  if (rval != NS_SUCCESS)
-    return NULL;
-  else
-    return hp;
-}
-
-int
-__gethostbyname_r(const char *name, struct hostent *result,
-	void *buffer, int buflen, struct hostent **hp, int *herr)
-{
-  int rval;
-  int type;
-
-  static const ns_dtab dtab[] = {
-    NS_FILES_CB(_ht_gethostbyname, NULL)
-    { NSSRC_DNS, _dns_gethostbyname, NULL },
-    NS_NIS_CB(_nis_gethostbyname, NULL) /* force -DHESIOD */
-    { 0 }
-  };
-
-  if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-    h_errno = NETDB_INTERNAL;
-    return HOST_NOT_FOUND;
-  }
-
-  if (_res.options & RES_USE_INET6)
-    type = AF_INET6;
-  else
-    type = AF_INET;
-
-  rval = nsdispatch((void *)hp, dtab, NSDB_HOSTS, "gethostbyname",
-                    default_src, name, type, result, buffer, buflen, herr);
-
-  if (rval != NS_SUCCESS)
-    return rval;
-  else
-    return 0;
-}
-
-struct hostent *
-gethostbyaddr(const char *addr, int len, int type)
-{
-  static struct hostent host, *hp;
-  static char hostbuf[BUFSIZ];
-  static int herr;
-  int rval;
-
-  static const ns_dtab dtab[] = {
-    NS_FILES_CB(_ht_gethostbyaddr, NULL)
-    { NSSRC_DNS, _dns_gethostbyaddr, NULL },
-    NS_NIS_CB(_nis_gethostbyaddr, NULL) /* force -DHESIOD */
-    { 0 }
-  };       
-
-#ifdef HAVE_DD_LOCK
-  __lock_acquire(addr_lock);
-#endif
-  rval = nsdispatch((void *)&hp, dtab, NSDB_HOSTS, "gethostbyaddr",
-			  default_src, addr, len, type, &host, hostbuf, BUFSIZ, &herr);
-
-#ifdef HAVE_DD_LOCK
-  __lock_release(addr_lock);
-#endif
-  if (rval != NS_SUCCESS)
-    return NULL;
-  else
-    return hp;
-}
-
-int
-__gethostbyaddr_r (const char *addr, int len, int type,
-                     struct hostent *result, void *buffer, int buflen,
-                     struct hostent **hp, int *herr)
-{
-  int rval;
-
-  static const ns_dtab dtab[] = {
-    NS_FILES_CB(_ht_gethostbyaddr, NULL)
-    { NSSRC_DNS, _dns_gethostbyaddr, NULL },
-    NS_NIS_CB(_nis_gethostbyaddr, NULL) /* force -DHESIOD */
-    { 0 }
-  };       
-
-  rval = nsdispatch((void *)hp, dtab, NSDB_HOSTS, "gethostbyaddr",
-                    default_src, addr, len, type, result, buffer, buflen, herr);
-
-  if(rval != NS_SUCCESS)
-    return rval;
-  else
-    return 0;
-}
-
-void
-sethostent(stayopen)
-	int stayopen;
-{
-	_sethosthtent(stayopen);
-	_sethostdnsent(stayopen);
-}
-
-void
-endhostent()
-{
-	_endhosthtent();
-	_endhostdnsent();
-}
-
-void
-sethostent_r(int f, FILE **hostfile, int *stayopen)
-{
-  _sethosthtent_r(f, hostfile, stayopen);
-  _sethostdnsent(f);
-}
-
-void
-endhostent_r(FILE **hostfile, int *stayopen)
-{
-  _endhosthtent_r(hostfile, stayopen);
-  _endhostdnsent();
-}
diff --git a/newlib/libc/sys/linux/net/getifaddrs.3 b/newlib/libc/sys/linux/net/getifaddrs.3
deleted file mode 100644
index 47e50049d..000000000
--- a/newlib/libc/sys/linux/net/getifaddrs.3
+++ /dev/null
@@ -1,164 +0,0 @@
-.\"	$FreeBSD: src/lib/libc/net/getifaddrs.3,v 1.6 2001/10/01 16:08:55 ru Exp $
-.\"	$KAME: getifaddrs.3,v 1.4 2000/05/17 14:13:14 itojun Exp $
-.\"	BSDI	getifaddrs.3,v 2.5 2000/02/23 14:51:59 dab Exp
-.\"
-.\" Copyright (c) 1995, 1999
-.\"	Berkeley Software Design, Inc.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.Dd October 12, 1995
-.Dt GETIFADDRS 3
-.Os
-.Sh NAME
-.Nm getifaddrs
-.Nd get interface addresses
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In ifaddrs.h
-.Ft int
-.Fn getifaddrs "struct ifaddrs **ifap"
-.Ft void
-.Fn freeifaddrs "struct ifaddrs *ifp"
-.Sh DESCRIPTION
-The
-.Fn getifaddrs
-function stores a reference to a linked list of the network interfaces
-on the local machine in the memory referenced by
-.Fa ifap .
-The list consists of
-.Nm ifaddrs
-structures, as defined in the include file
-.Aq Pa ifaddrs.h .
-The
-.Nm ifaddrs
-structure contains at least the following entries:
-.Bd -literal
-    struct ifaddrs   *ifa_next;         /* Pointer to next struct */
-    char             *ifa_name;         /* Interface name */
-    u_int             ifa_flags;        /* Interface flags */
-    struct sockaddr  *ifa_addr;         /* Interface address */
-    struct sockaddr  *ifa_netmask;      /* Interface netmask */
-    struct sockaddr  *ifa_broadaddr;    /* Interface broadcast address */
-    struct sockaddr  *ifa_dstaddr;      /* P2P interface destination */
-    void             *ifa_data;		/* Address specific data */
-.Ed
-.Pp
-The
-.Li ifa_next
-field contains a pointer to the next structure on the list.
-This field is
-.Dv NULL
-in last structure on the list.
-.Pp
-The
-.Li ifa_name
-field contains the interface name.
-.Pp
-The
-.Li ifa_flags
-field contains the interface flags, as set by
-.Xr ifconfig 8
-utility.
-.Pp
-The
-.Li ifa_addr
-field references either the address of the interface or the link level
-address of the interface, if one exists, otherwise it is NULL.
-(The
-.Li sa_family
-field of the
-.Li ifa_addr
-field should be consulted to determine the format of the
-.Li ifa_addr
-address.)
-.Pp
-The
-.Li ifa_netmask
-field references the netmask associated with
-.Li ifa_addr ,
-if one is set, otherwise it is NULL.
-.Pp
-The
-.Li ifa_broadaddr
-field,
-which should only be referenced for non-P2P interfaces,
-references the broadcast address associated with
-.Li ifa_addr ,
-if one exists, otherwise it is NULL.
-.Pp
-The
-.Li ifa_dstaddr
-field references the destination address on a P2P interface,
-if one exists, otherwise it is NULL.
-.Pp
-The
-.Li ifa_data
-field references address family specific data.  For
-.Dv AF_LINK
-addresses it contains a pointer to the
-.Fa struct if_data
-(as defined in include file
-.Aq Pa net/if.h )
-which contains various interface attributes and statistics.
-For all other address families, it contains a pointer to the
-.Fa struct ifa_data
-(as defined in include file
-.Aq Pa net/if.h )
-which contains per-address interface statistics.
-.Pp
-The data returned by
-.Fn getifaddrs
-is dynamically allocated and should be freed using
-.Fn freeifaddrs
-when no longer needed.
-.Sh RETURN VALUES
-.Rv -std getifaddrs
-.Sh ERRORS
-The
-.Fn getifaddrs
-may fail and set
-.Va errno
-for any of the errors specified for the library routines
-.Xr ioctl 2 ,
-.Xr socket 2 ,
-.Xr malloc 3
-or
-.Xr sysctl 3 .
-.Sh BUGS
-If both
-.Aq Pa net/if.h
-and
-.Aq Pa ifaddrs.h
-are being included,
-.Aq Pa net/if.h
-.Em must
-be included before
-.Aq Pa ifaddrs.h .
-.Sh SEE ALSO
-.Xr ioctl 2 ,
-.Xr socket 2 ,
-.Xr sysctl 3 ,
-.Xr networking 4 ,
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-implementation first appeared in BSDi
-.Bsx .
diff --git a/newlib/libc/sys/linux/net/getifaddrs.c b/newlib/libc/sys/linux/net/getifaddrs.c
deleted file mode 100644
index fdb8c9b9d..000000000
--- a/newlib/libc/sys/linux/net/getifaddrs.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/*	$KAME: getifaddrs.c,v 1.9 2001/08/20 02:31:20 itojun Exp $	*/
-
-/*
- * Copyright (c) 1995, 1999
- *	Berkeley Software Design, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	BSDI getifaddrs.c,v 2.12 2000/02/23 14:51:59 dab Exp
- */
-/*
- * NOTE: SIOCGIFCONF case is not LP64 friendly.  it also does not perform
- * try-and-error for region size.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-#include <sys/sockio.h>
-#include <unistd.h>
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#ifdef	NET_RT_IFLIST
-#include <sys/param.h>
-#include <net/route.h>
-#include <sys/sysctl.h>
-#include <net/if_dl.h>
-#endif
-
-#include <ifaddrs.h>
-#include <stdlib.h>
-#include <string.h>
-#include "un-namespace.h"
-
-#if !defined(AF_LINK)
-#define	SA_LEN(sa)	sizeof(struct sockaddr)
-#endif
-
-#if !defined(SA_LEN)
-#define	SA_LEN(sa)	sizeof(struct sockaddr)
-#endif
-
-#define	SALIGN	(sizeof(long) - 1)
-#define	SA_RLEN(sa)	(sizeof(struct sockaddr) ? ((sizeof(struct sockaddr) + SALIGN) & ~SALIGN) : (SALIGN + 1))
-
-#ifndef	ALIGNBYTES
-/*
- * On systems with a routing socket, ALIGNBYTES should match the value
- * that the kernel uses when building the messages.
- */
-#define	ALIGNBYTES	XXX
-#endif
-#ifndef	ALIGN
-#define	ALIGN(p)	(((u_long)(p) + ALIGNBYTES) &~ ALIGNBYTES)
-#endif
-
-#if	_BSDI_VERSION >= 199701
-#define	HAVE_IFM_DATA
-#endif
-
-#if	_BSDI_VERSION >= 199802
-/* ifam_data is very specific to recent versions of bsdi */
-#define	HAVE_IFAM_DATA
-#endif
-
-#if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__FreeBSD__)
-#define	HAVE_IFM_DATA
-#endif
-
-int
-getifaddrs(struct ifaddrs **pif)
-{
-	int icnt = 1;
-	int dcnt = 0;
-	int ncnt = 0;
-#ifdef	NET_RT_IFLIST
-	int mib[6];
-	size_t needed;
-	char *buf;
-	char *next;
-	struct ifaddrs *cif = 0;
-	char *p, *p0;
-	struct rt_msghdr *rtm;
-	struct if_msghdr *ifm;
-	struct ifa_msghdr *ifam;
-	struct sockaddr_dl *dl;
-	struct sockaddr *sa;
-	struct ifaddrs *ifa, *ift;
-	u_short idx = 0;
-#else	/* NET_RT_IFLIST */
-	struct ifaddrs *ifa, *ift;
-	char buf[1024];
-	int m, sock;
-	struct ifconf ifc;
-	struct ifreq *ifr;
-	struct ifreq *lifr;
-#endif	/* NET_RT_IFLIST */
-	int i;
-	size_t len, alen;
-	char *data;
-	char *names;
-
-#ifdef	NET_RT_IFLIST
-	mib[0] = CTL_NET;
-	mib[1] = PF_ROUTE;
-	mib[2] = 0;             /* protocol */
-	mib[3] = 0;             /* wildcard address family */
-	mib[4] = NET_RT_IFLIST;
-	mib[5] = 0;             /* no flags */
-	if (__sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
-		return (-1);
-	if ((buf = malloc(needed)) == NULL)
-		return (-1);
-	if (__sysctl(mib, 6, buf, &needed, NULL, 0) < 0) {
-		free(buf);
-		return (-1);
-	}
-
-	for (next = buf; next < buf + needed; next += rtm->rtm_msglen) {
-		rtm = (struct rt_msghdr *)(void *)next;
-		if (rtm->rtm_version != RTM_VERSION)
-			continue;
-		switch (rtm->rtm_type) {
-		case RTM_IFINFO:
-			ifm = (struct if_msghdr *)(void *)rtm;
-			if (ifm->ifm_addrs & RTA_IFP) {
-				idx = ifm->ifm_index;
-				++icnt;
-				dl = (struct sockaddr_dl *)(void *)(ifm + 1);
-				dcnt += SA_RLEN((struct sockaddr *)(void*)dl) +
-				    ALIGNBYTES;
-#ifdef	HAVE_IFM_DATA
-				dcnt += sizeof(ifm->ifm_data);
-#endif	/* HAVE_IFM_DATA */
-				ncnt += dl->sdl_nlen + 1;
-			} else
-				idx = 0;
-			break;
-
-		case RTM_NEWADDR:
-			ifam = (struct ifa_msghdr *)(void *)rtm;
-			if (idx && ifam->ifam_index != idx)
-				abort();	/* this cannot happen */
-
-#define	RTA_MASKS	(RTA_NETMASK | RTA_IFA | RTA_BRD)
-			if (idx == 0 || (ifam->ifam_addrs & RTA_MASKS) == 0)
-				break;
-			p = (char *)(void *)(ifam + 1);
-			++icnt;
-#ifdef	HAVE_IFAM_DATA
-			dcnt += sizeof(ifam->ifam_data) + ALIGNBYTES;
-#endif	/* HAVE_IFAM_DATA */
-			/* Scan to look for length of address */
-			alen = 0;
-			for (p0 = p, i = 0; i < RTAX_MAX; i++) {
-				if ((RTA_MASKS & ifam->ifam_addrs & (1 << i))
-				    == 0)
-					continue;
-				sa = (struct sockaddr *)(void *)p;
-				len = SA_RLEN(sa);
-				if (i == RTAX_IFA) {
-					alen = len;
-					break;
-				}
-				p += len;
-			}
-			for (p = p0, i = 0; i < RTAX_MAX; i++) {
-				if ((RTA_MASKS & ifam->ifam_addrs & (1 << i))
-				    == 0)
-					continue;
-				sa = (struct sockaddr *)(void *)p;
-				len = SA_RLEN(sa);
-				if (i == RTAX_NETMASK && SA_LEN(sa) == 0)
-					dcnt += alen;
-				else
-					dcnt += len;
-				p += len;
-			}
-			break;
-		}
-	}
-#else	/* NET_RT_IFLIST */
-	ifc.ifc_buf = buf;
-	ifc.ifc_len = sizeof(buf);
-
-	if ((sock = socket(AF_INET, SOCK_STREAM, 0)) < 0)
-		return (-1);
-	i =  ioctl(sock, SIOCGIFCONF, (char *)&ifc);
-	close(sock);
-	if (i < 0)
-		return (-1);
-
-	ifr = ifc.ifc_req;
-	lifr = (struct ifreq *)&ifc.ifc_buf[ifc.ifc_len];
-
-	while (ifr < lifr) {
-		struct sockaddr *sa;
-
-		sa = &ifr->ifr_addr;
-		++icnt;
-		dcnt += SA_RLEN(sa);
-		ncnt += sizeof(ifr->ifr_name) + 1;
-		
-		if (SA_LEN(sa) < sizeof(*sa))
-			ifr = (struct ifreq *)(((char *)sa) + sizeof(*sa));
-		else
-			ifr = (struct ifreq *)(((char *)sa) + SA_LEN(sa));
-	}
-#endif	/* NET_RT_IFLIST */
-
-	if (icnt + dcnt + ncnt == 1) {
-		*pif = NULL;
-		free(buf);
-		return (0);
-	}
-	data = malloc(sizeof(struct ifaddrs) * icnt + dcnt + ncnt);
-	if (data == NULL) {
-		free(buf);
-		return(-1);
-	}
-
-	ifa = (struct ifaddrs *)(void *)data;
-	data += sizeof(struct ifaddrs) * icnt;
-	names = data + dcnt;
-
-	memset(ifa, 0, sizeof(struct ifaddrs) * icnt);
-	ift = ifa;
-
-#ifdef	NET_RT_IFLIST
-	idx = 0;
-	for (next = buf; next < buf + needed; next += rtm->rtm_msglen) {
-		rtm = (struct rt_msghdr *)(void *)next;
-		if (rtm->rtm_version != RTM_VERSION)
-			continue;
-		switch (rtm->rtm_type) {
-		case RTM_IFINFO:
-			ifm = (struct if_msghdr *)(void *)rtm;
-			if (ifm->ifm_addrs & RTA_IFP) {
-				idx = ifm->ifm_index;
-				dl = (struct sockaddr_dl *)(void *)(ifm + 1);
-
-				cif = ift;
-				ift->ifa_name = names;
-				ift->ifa_flags = (int)ifm->ifm_flags;
-				memcpy(names, dl->sdl_data,
-				    (size_t)dl->sdl_nlen);
-				names[dl->sdl_nlen] = 0;
-				names += dl->sdl_nlen + 1;
-
-				ift->ifa_addr = (struct sockaddr *)(void *)data;
-				memcpy(data, dl,
-				    (size_t)SA_LEN((struct sockaddr *)
-				    (void *)dl));
-				data += SA_RLEN((struct sockaddr *)(void *)dl);
-
-#ifdef	HAVE_IFM_DATA
-				/* ifm_data needs to be aligned */
-				ift->ifa_data = data = (void *)ALIGN(data);
-				memcpy(data, &ifm->ifm_data, sizeof(ifm->ifm_data));
- 				data += sizeof(ifm->ifm_data);
-#else	/* HAVE_IFM_DATA */
-				ift->ifa_data = NULL;
-#endif	/* HAVE_IFM_DATA */
-
-				ift = (ift->ifa_next = ift + 1);
-			} else
-				idx = 0;
-			break;
-
-		case RTM_NEWADDR:
-			ifam = (struct ifa_msghdr *)(void *)rtm;
-			if (idx && ifam->ifam_index != idx)
-				abort();	/* this cannot happen */
-
-			if (idx == 0 || (ifam->ifam_addrs & RTA_MASKS) == 0)
-				break;
-			ift->ifa_name = cif->ifa_name;
-			ift->ifa_flags = cif->ifa_flags;
-			ift->ifa_data = NULL;
-			p = (char *)(void *)(ifam + 1);
-			/* Scan to look for length of address */
-			alen = 0;
-			for (p0 = p, i = 0; i < RTAX_MAX; i++) {
-				if ((RTA_MASKS & ifam->ifam_addrs & (1 << i))
-				    == 0)
-					continue;
-				sa = (struct sockaddr *)(void *)p;
-				len = SA_RLEN(sa);
-				if (i == RTAX_IFA) {
-					alen = len;
-					break;
-				}
-				p += len;
-			}
-			for (p = p0, i = 0; i < RTAX_MAX; i++) {
-				if ((RTA_MASKS & ifam->ifam_addrs & (1 << i))
-				    == 0)
-					continue;
-				sa = (struct sockaddr *)(void *)p;
-				len = SA_RLEN(sa);
-				switch (i) {
-				case RTAX_IFA:
-					ift->ifa_addr =
-					    (struct sockaddr *)(void *)data;
-					memcpy(data, p, len);
-					data += len;
-					break;
-
-				case RTAX_NETMASK:
-					ift->ifa_netmask =
-					    (struct sockaddr *)(void *)data;
-					if (SA_LEN(sa) == 0) {
-						memset(data, 0, alen);
-						data += alen;
-						break;
-					}
-					memcpy(data, p, len);
-					data += len;
-					break;
-
-				case RTAX_BRD:
-					ift->ifa_broadaddr =
-					    (struct sockaddr *)(void *)data;
-					memcpy(data, p, len);
-					data += len;
-					break;
-				}
-				p += len;
-			}
-
-#ifdef	HAVE_IFAM_DATA
-			/* ifam_data needs to be aligned */
-			ift->ifa_data = data = (void *)ALIGN(data);
-			memcpy(data, &ifam->ifam_data, sizeof(ifam->ifam_data));
-			data += sizeof(ifam->ifam_data);
-#endif	/* HAVE_IFAM_DATA */
-
-			ift = (ift->ifa_next = ift + 1);
-			break;
-		}
-	}
-
-	free(buf);
-#else	/* NET_RT_IFLIST */
-	ifr = ifc.ifc_req;
-	lifr = (struct ifreq *)&ifc.ifc_buf[ifc.ifc_len];
-
-	while (ifr < lifr) {
-		struct sockaddr *sa;
-
-		ift->ifa_name = names;
-		names[sizeof(ifr->ifr_name)] = 0;
-		strncpy(names, ifr->ifr_name, sizeof(ifr->ifr_name));
-		while (*names++)
-			;
-
-		ift->ifa_addr = (struct sockaddr *)data;
-		sa = &ifr->ifr_addr;
-		memcpy(data, sa, SA_LEN(sa));
-		data += SA_RLEN(sa);
-		
-		ifr = (struct ifreq *)(((char *)sa) + SA_LEN(sa));
-		ift = (ift->ifa_next = ift + 1);
-	}
-#endif	/* NET_RT_IFLIST */
-	if (--ift >= ifa) {
-		ift->ifa_next = NULL;
-		*pif = ifa;
-	} else {
-		*pif = NULL;
-		free(ifa);
-	}
-	return (0);
-}
-
-void
-freeifaddrs(struct ifaddrs *ifp)
-{
-
-	free(ifp);
-}
diff --git a/newlib/libc/sys/linux/net/getipnodebyname.3 b/newlib/libc/sys/linux/net/getipnodebyname.3
deleted file mode 100644
index 5b8ea1ecb..000000000
--- a/newlib/libc/sys/linux/net/getipnodebyname.3
+++ /dev/null
@@ -1,461 +0,0 @@
-.\"	$FreeBSD: src/lib/libc/net/getipnodebyname.3,v 1.8 2001/10/01 16:08:55 ru Exp $
-.\"	$KAME: getipnodebyname.3,v 1.6 2000/08/09 21:16:17 itojun Exp $
-.\"
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)gethostbyname.3	8.4 (Berkeley) 5/25/95
-.\"
-.Dd May 25, 1995
-.Dt GETIPNODEBYNAME 3
-.Os
-.\"
-.Sh NAME
-.Nm getipnodebyname ,
-.Nm getipnodebyaddr ,
-.Nm freehostent
-.Nd nodename-to-address and address-to-nodename translation
-.\"
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In netdb.h
-.Ft "struct hostent *"
-.Fn getipnodebyname "const char *name" "int af" "int flags" "int *error_num"
-.Ft "struct hostent *"
-.Fn getipnodebyaddr "const void *src" "size_t len" "int af" "int *error_num"
-.Ft void
-.Fn freehostent "struct hostent *ptr"
-.\"
-.Sh DESCRIPTION
-.Fn getipnodebyname
-and
-.Fn getipnodebyaddr
-functions are very similar to
-.Xr gethostbyname 3 ,
-.Xr gethostbyname2 3
-and
-.Xr gethostbyaddr 3 .
-The functions cover all the functionalities provided by the older ones,
-and provide better interface to programmers.
-The functions require additional arguments,
-.Ar af ,
-and
-.Ar flags ,
-for specifying address family and operation mode.
-The additional arguments allow programmer to get address for a nodename,
-for specific address family
-(such as
-.Dv AF_INET
-or
-.Dv AF_INET6 ) .
-The functions also require an additional pointer argument,
-.Ar error_num
-to return the appropriate error code,
-to support thread safe error code returns.
-.Pp
-The type and usage of the return value,
-.Li "struct hostent"
-is described in
-.Xr gethostbyname 3 .
-.Pp
-For
-.Fn getipnodebyname ,
-the
-.Ar name
-argument can be either a node name or a numeric address
-string
-(i.e., a dotted-decimal IPv4 address or an IPv6 hex address).
-The
-.Ar af
-argument specifies the address family, either
-.Dv AF_INET
-or
-.Dv AF_INET6 .
-The
-.Ar flags
-argument specifies the types of addresses that are searched for,
-and the types of addresses that are returned.
-We note that a special flags value of
-.Dv AI_DEFAULT
-(defined below)
-should handle most applications.
-That is, porting simple applications to use IPv6 replaces the call
-.Bd -literal -offset
-   hptr = gethostbyname(name);
-.Ed
-.Pp
-with
-.Bd -literal -offset
-   hptr = getipnodebyname(name, AF_INET6, AI_DEFAULT, &error_num);
-.Ed
-.Pp
-Applications desiring finer control over the types of addresses
-searched for and returned, can specify other combinations of the
-.Ar flags
-argument.
-.Pp
-A
-.Ar flags
-of
-.Li 0
-implies a strict interpretation of the
-.Ar af
-argument:
-.Bl -bullet
-.It
-If
-.Ar flags
-is 0 and
-.Ar af
-is
-.Dv AF_INET ,
-then the caller wants only IPv4 addresses.
-A query is made for
-.Li A
-records.
-If successful, the IPv4 addresses are returned and the
-.Li h_length
-member of the
-.Li hostent
-structure will be 4, else the function returns a
-.Dv NULL
-pointer.
-.It
-If
-.Ar flags
-is 0 and if
-.Ar af
-is
-.Li AF_INET6 ,
-then the caller wants only IPv6 addresses.
-A query is made for
-.Li AAAA
-records.
-If successful, the IPv6 addresses are returned and the
-.Li h_length
-member of the
-.Li hostent
-structure will be 16, else the function returns a
-.Dv NULL
-pointer.
-.El
-.Pp
-Other constants can be logically-ORed into the
-.Ar flags
-argument, to modify the behavior of the function.
-.Bl -bullet
-.It
-If the
-.Dv AI_V4MAPPED
-flag is specified along with an
-.Ar af
-of
-.Dv AF_INET6 ,
-then the caller will accept IPv4-mapped IPv6 addresses.
-That is, if no
-.Li AAAA
-records are found then a query is made for
-.Li A
-records and any found are returned as IPv4-mapped IPv6 addresses
-.Li ( h_length
-will be 16).
-The
-.Dv AI_V4MAPPED
-flag is ignored unless
-.Ar af
-equals
-.Dv AF_INET6 .
-.It
-The
-.Dv AI_V4MAPPED_CFG
-flag is exact same as the
-.Dv AI_V4MAPPED
-flag only if the kernel supports IPv4-mapped IPv6 address.
-.It
-If the
-.Dv AI_ALL
-flag is used in conjunction with the
-.Dv AI_V4MAPPED
-flag, and only used with the IPv6 address family.
-When
-.Dv AI_ALL
-is logically or'd with
-.Dv AI_V4MAPPED
-flag then the caller wants all addresses: IPv6 and IPv4-mapped IPv6.
-A query is first made for
-.Li AAAA
-records and if successful, the
-IPv6 addresses are returned.  Another query is then made for
-.Li A
-records and any found are returned as IPv4-mapped IPv6 addresses.
-.Li h_length
-will be 16.  Only if both queries fail does the function
-return a
-.Dv NULL
-pointer.  This flag is ignored unless af equals
-AF_INET6.  If both
-.Dv AI_ALL
-and
-.Dv AI_V4MAPPED
-are specified,
-.Dv AI_ALL
-takes precedence.
-.It
-The
-.Dv AI_ADDRCONFIG
-flag specifies that a query for
-.Li AAAA
-records
-should occur only if the node has at least one IPv6 source
-address configured and a query for
-.Li A
-records should occur only if the node has at least one IPv4 source address
-configured.
-.Pp
-For example, if the node has no IPv6 source addresses configured,
-and
-.Ar af
-equals AF_INET6, and the node name being looked up has both
-.Li AAAA
-and
-.Li A
-records, then:
-(a) if only
-.Dv AI_ADDRCONFIG
-is
-specified, the function returns a
-.Dv NULL
-pointer;
-(b) if
-.Dv AI_ADDRCONFIG
-|
-.Dv AI_V4MAPPED
-is specified, the
-.Li A
-records are returned as IPv4-mapped IPv6 addresses;
-.El
-.Pp
-The special flags value of
-.Dv AI_DEFAULT
-is defined as
-.Bd -literal -offset
-   #define  AI_DEFAULT  (AI_V4MAPPED_CFG | AI_ADDRCONFIG)
-.Ed
-.Pp
-We noted that the
-.Fn getipnodebyname
-function must allow the
-.Ar name
-argument to be either a node name or a literal address string
-(i.e., a dotted-decimal IPv4 address or an IPv6 hex address).
-This saves applications from having to call
-.Xr inet_pton 3
-to handle literal address strings.
-When the
-.Ar name
-argument is a literal address string,
-the
-.Ar flags
-argument is always ignored.
-.Pp
-There are four scenarios based on the type of literal address string
-and the value of the
-.Ar af
-argument.
-The two simple cases are when
-.Ar name
-is a dotted-decimal IPv4 address and
-.Ar af
-equals
-.Dv AF_INET ,
-or when
-.Ar name
-is an IPv6 hex address and
-.Ar af
-equals
-.Dv AF_INET6 .
-The members of the
-returned hostent structure are:
-.Li h_name
-points to a copy of the
-.Ar name
-argument,
-.Li h_aliases
-is a
-.Dv NULL
-pointer,
-.Li h_addrtype
-is a copy of the
-.Ar af
-argument,
-.Li h_length
-is either 4
-(for
-.Dv AF_INET )
-or 16
-(for
-.Dv AF_INET6 ) ,
-.Li h_addr_list[0]
-is a pointer to the 4-byte or 16-byte binary address,
-and
-.Li h_addr_list[1]
-is a
-.Dv NULL
-pointer.
-.Pp
-When
-.Ar name
-is a dotted-decimal IPv4 address and
-.Ar af
-equals
-.Dv AF_INET6 ,
-and
-.Dv AI_V4MAPPED
-is specified,
-an IPv4-mapped IPv6 address is returned:
-.Li h_name
-points to an IPv6 hex address containing the IPv4-mapped IPv6 address,
-.Li h_aliases
-is a
-.Dv NULL
-pointer,
-.Li h_addrtype
-is
-.Dv AF_INET6 ,
-.Li h_length
-is 16,
-.Li h_addr_list[0]
-is a pointer to the 16-byte binary address, and
-.Li h_addr_list[1]
-is a
-.Dv NULL
-pointer.
-.Pp
-It is an error when
-.Ar name
-is an IPv6 hex address and
-.Ar af
-equals
-.Dv AF_INET .
-The function's return value is a
-.Dv NULL
-pointer and the value pointed to by
-.Ar error_num
-equals
-.Dv HOST_NOT_FOUND .
-.Pp
-.Fn getipnodebyaddr
-takes almost the same argument as
-.Xr gethostbyaddr 3 ,
-but adds a pointer to return an error number.
-Additionally it takes care of IPv4-mapped IPv6 addresses,
-and IPv4-compatible IPv6 addresses.
-.Pp
-.Fn getipnodebyname
-and
-.Fn getipnodebyaddr
-dynamically allocate the structure to be returned to the caller.
-.Fn freehostent
-reclaims memory region allocated and returned by
-.Fn getipnodebyname
-or
-.Fn getipnodebyaddr .
-.\"
-.Sh FILES
-.Bl -tag -width /etc/nsswitch.conf -compact
-.It Pa /etc/hosts
-.It Pa /etc/nsswitch.conf
-.It Pa /etc/resolv.conf
-.El
-.\"
-.Sh DIAGNOSTICS
-.Fn getipnodebyname
-and
-.Fn getipnodebyaddr
-returns
-.Dv NULL
-on errors.
-The integer values pointed to by
-.Ar error_num
-may then be checked to see whether this is a temporary failure
-or an invalid or unknown host.
-The meanings of each error code are described in
-.Xr gethostbyname 3 .
-.\"
-.Sh SEE ALSO
-.Xr gethostbyaddr 3 ,
-.Xr gethostbyname 3 ,
-.Xr hosts 5 ,
-.Xr nsswitch.conf 5 ,
-.Xr services 5 ,
-.Xr hostname 7 ,
-.Xr named 8
-.Pp
-.Rs
-.%A R. Gilligan
-.%A S. Thomson
-.%A J. Bound
-.%A W. Stevens
-.%T Basic Socket Interface Extensions for IPv6
-.%R RFC2553
-.%D March 1999
-.Re
-.\"
-.Sh HISTORY
-The implementation first appeared in KAME advanced networking kit.
-.\"
-.Sh STANDARDS
-.Fn getipnodebyname
-and
-.Fn getipnodebyaddr
-are documented in
-.Dq Basic Socket Interface Extensions for IPv6
-(RFC2553).
-.\"
-.Sh BUGS
-.Fn getipnodebyname
-and
-.Fn getipnodebyaddr
-do not handle scoped IPv6 address properly.
-If you use these functions,
-your program will not be able to handle scoped IPv6 addresses.
-For IPv6 address manipulation,
-.Fn getaddrinfo 3
-and
-.Fn getnameinfo 3
-are recommended.
-.Pp
-The current implementation is not thread-safe.
-.Pp
-The text was shamelessly copied from RFC2553.
diff --git a/newlib/libc/sys/linux/net/getnameinfo.3 b/newlib/libc/sys/linux/net/getnameinfo.3
deleted file mode 100644
index d7afa2f40..000000000
--- a/newlib/libc/sys/linux/net/getnameinfo.3
+++ /dev/null
@@ -1,311 +0,0 @@
-.\"	$FreeBSD: src/lib/libc/net/getnameinfo.3,v 1.11 2001/10/01 16:08:55 ru Exp $
-.\"	$KAME: getnameinfo.3,v 1.17 2000/08/09 21:16:17 itojun Exp $
-.\"
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)gethostbyname.3	8.4 (Berkeley) 5/25/95
-.\"
-.Dd May 25, 1995
-.Dt GETNAMEINFO 3
-.Os
-.\"
-.Sh NAME
-.Nm getnameinfo
-.Nd address-to-nodename translation in protocol-independent manner
-.\"
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In netdb.h
-.Ft int
-.Fn getnameinfo "const struct sockaddr *sa" "socklen_t salen" \
-"char *host" "size_t hostlen" "char *serv" "size_t servlen" "int flags"
-.\"
-.Sh DESCRIPTION
-The
-.Fn getnameinfo
-function is defined for protocol-independent address-to-nodename translation.
-Its functionality is a reverse conversion of
-.Xr getaddrinfo 3 ,
-and implements similar functionality with
-.Xr gethostbyaddr 3
-and
-.Xr getservbyport 3
-in more sophisticated manner.
-.Pp
-This function looks up an IP address and port number provided by the
-caller in the DNS and system-specific database, and returns text
-strings for both in buffers provided by the caller.
-The function indicates successful completion by a zero return value;
-a non-zero return value indicates failure.
-.Pp
-The first argument,
-.Fa sa ,
-points to either a
-.Li sockaddr_in
-structure (for IPv4) or a
-.Li sockaddr_in6
-structure (for IPv6) that holds the IP address and port number.
-The
-.Fa salen
-argument gives the length of the
-.Li sockaddr_in
-or
-.Li sockaddr_in6
-structure.
-.Pp
-The function returns the nodename associated with the IP address in
-the buffer pointed to by the
-.Fa host
-argument.
-The caller provides the size of this buffer via the
-.Fa hostlen
-argument.
-The service name associated with the port number is returned in the buffer
-pointed to by
-.Fa serv ,
-and the
-.Fa servlen
-argument gives the length of this buffer.
-The caller specifies not to return either string by providing a zero
-value for the
-.Fa hostlen
-or
-.Fa servlen
-arguments.
-Otherwise, the caller must provide buffers large enough to hold the
-nodename and the service name, including the terminating null characters.
-.Pp
-Unfortunately most systems do not provide constants that specify the
-maximum size of either a fully-qualified domain name or a service name.
-Therefore to aid the application in allocating buffers for these two
-returned strings the following constants are defined in
-.Aq Pa netdb.h :
-.Bd -literal -offset
-#define NI_MAXHOST  1025
-#define NI_MAXSERV    32
-.Ed
-.Pp
-The first value is actually defined as the constant
-.Dv MAXDNAME
-in recent versions of BIND's
-.Aq Pa arpa/nameser.h
-header
-(older versions of BIND define this constant to be 256)
-and the second is a guess based on the services listed in the current
-Assigned Numbers RFC.
-.Pp
-The final argument is a
-.Fa flag
-that changes the default actions of this function.
-By default the fully-qualified domain name (FQDN) for the host is
-looked up in the DNS and returned.
-If the flag bit
-.Dv NI_NOFQDN
-is set, only the nodename portion of the FQDN is returned for local hosts.
-.Pp
-If the
-.Fa flag
-bit
-.Dv NI_NUMERICHOST
-is set, or if the host's name cannot be located in the DNS,
-the numeric form of the host's address is returned instead of its name
-(e.g., by calling
-.Fn inet_ntop
-instead of
-.Fn getnodebyaddr ) .
-If the
-.Fa flag
-bit
-.Dv NI_NAMEREQD
-is set, an error is returned if the host's name cannot be located in the DNS.
-.Pp
-If the flag bit
-.Dv NI_NUMERICSERV
-is set, the numeric form of the service address is returned
-(e.g., its port number)
-instead of its name.
-The two
-.Dv NI_NUMERICxxx
-flags are required to support the
-.Fl n
-flag that many commands provide.
-.Pp
-A fifth flag bit,
-.Dv NI_DGRAM ,
-specifies that the service is a datagram service, and causes
-.Fn getservbyport
-to be called with a second argument of
-.Dq udp
-instead of its default of
-.Dq tcp .
-This is required for the few ports (512-514)
-that have different services for UDP and TCP.
-.Pp
-These
-.Dv NI_xxx
-flags are defined in
-.Aq Pa netdb.h .
-.\"
-.Sh EXTENSION
-The implementation allows experimental numeric IPv6 address notation with
-scope identifier.
-IPv6 link-local address will appear as string like
-.Dq Li fe80::1%ne0 ,
-if
-.Dv NI_WITHSCOPEID
-bit is enabled in
-.Ar flags
-argument.
-Refer to
-.Xr getaddrinfo 3
-for the notation.
-.\"
-.Sh EXAMPLES
-The following code tries to get numeric hostname, and service name,
-for given socket address.
-Observe that there is no hardcoded reference to particular address family.
-.Bd -literal -offset indent
-struct sockaddr *sa;	/* input */
-char hbuf[NI_MAXHOST], sbuf[NI_MAXSERV];
-
-if (getnameinfo(sa, sa->sa_len, hbuf, sizeof(hbuf), sbuf,
-    sizeof(sbuf), NI_NUMERICHOST | NI_NUMERICSERV)) {
-	errx(1, "could not get numeric hostname");
-	/*NOTREACHED*/
-}
-printf("host=%s, serv=%s\\n", hbuf, sbuf);
-.Ed
-.Pp
-The following version checks if the socket address has reverse address mapping.
-.Bd -literal -offset indent
-struct sockaddr *sa;	/* input */
-char hbuf[NI_MAXHOST];
-
-if (getnameinfo(sa, sa->sa_len, hbuf, sizeof(hbuf), NULL, 0,
-    NI_NAMEREQD)) {
-	errx(1, "could not resolve hostname");
-	/*NOTREACHED*/
-}
-printf("host=%s\\n", hbuf);
-.Ed
-.\"
-.Sh FILES
-.Bl -tag -width /etc/nsswitch.conf -compact
-.It Pa /etc/hosts
-.It Pa /etc/nsswitch.conf
-.It Pa /etc/resolv.conf
-.El
-.\"
-.Sh DIAGNOSTICS
-The function indicates successful completion by a zero return value;
-a non-zero return value indicates failure.
-Error codes are as below:
-.Bl -tag -width Er
-.It Bq Er EAI_AGAIN
-The name could not be resolved at this time.
-Future attempts may succeed.
-.It Bq Er EAI_BADFLAGS
-The flags had an invalid value.
-.It Bq Er EAI_FAIL
-A non-recoverable error occurred.
-.It Bq Er EAI_FAMILY
-The address family was not recognized or the address length was invalid
-for the specified family.
-.It Bq Er EAI_MEMORY
-There was a memory allocation failure.
-.It Bq Er EAI_NONAME
-The name does not resolve for the supplied parameters.
-.Dv NI_NAMEREQD
-is set and the host's name cannot be located,
-or both nodename and servname were null.
-.It Bq Er EAI_SYSTEM
-A system error occurred.
-The error code can be found in errno.
-.El
-.\"
-.Sh SEE ALSO
-.Xr getaddrinfo 3 ,
-.Xr gethostbyaddr 3 ,
-.Xr getservbyport 3 ,
-.Xr hosts 5 ,
-.Xr services 5 ,
-.Xr hostname 7 ,
-.Xr named 8
-.Pp
-.Rs
-.%A R. Gilligan
-.%A S. Thomson
-.%A J. Bound
-.%A W. Stevens
-.%T Basic Socket Interface Extensions for IPv6
-.%R RFC2553
-.%D March 1999
-.Re
-.Rs
-.%A Tatsuya Jinmei
-.%A Atsushi Onoe
-.%T "An Extension of Format for IPv6 Scoped Addresses"
-.%R internet draft
-.%N draft-ietf-ipngwg-scopedaddr-format-02.txt
-.%O work in progress material
-.Re
-.Rs
-.%A Craig Metz
-.%T Protocol Independence Using the Sockets API
-.%B "Proceedings of the freenix track: 2000 USENIX annual technical conference"
-.%D June 2000
-.Re
-.\"
-.Sh HISTORY
-The implementation first appeared in WIDE Hydrangea IPv6 protocol stack kit.
-.\"
-.Sh STANDARDS
-The
-.Fn getaddrinfo
-function is defined in
-.St -p1003.1g-2000 ,
-and documented in
-.Dq Basic Socket Interface Extensions for IPv6
-(RFC2553).
-.\"
-.Sh BUGS
-The current implementation is not thread-safe.
-.Pp
-The text was shamelessly copied from RFC2553.
-.Pp
-The type of the 2nd argument should be
-.Li socklen_t
-for RFC2553 conformance.
-The current code is based on pre-RFC2553 specification.
diff --git a/newlib/libc/sys/linux/net/getnameinfo.c b/newlib/libc/sys/linux/net/getnameinfo.c
deleted file mode 100644
index e2f9631c1..000000000
--- a/newlib/libc/sys/linux/net/getnameinfo.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*	$KAME: getnameinfo.c,v 1.45 2000/09/25 22:43:56 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Issues to be discussed:
- * - Thread safe-ness must be checked
- * - RFC2553 says that we should raise error on short buffer.  X/Open says
- *   we need to truncate the result.  We obey RFC2553 (and X/Open should be
- *   modified).  ipngwg rough consensus seems to follow RFC2553.
- * - What is "local" in NI_FQDN?
- * - NI_NAMEREQD and NI_NUMERICHOST conflict with each other.
- * - (KAME extension) NI_WITHSCOPEID when called with global address,
- *   and sin6_scope_id filled
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <string.h>
-#include <stddef.h>
-#include <errno.h>
-
-#define SUCCESS 0
-#define ANY 0
-#define YES 1
-#define NO  0
-
-static struct afd {
-	int a_af;
-	int a_addrlen;
-	int a_socklen;
-	int a_off;
-} afdl [] = {
-#ifdef INET6
-	{PF_INET6, sizeof(struct in6_addr), sizeof(struct sockaddr_in6),
-		offsetof(struct sockaddr_in6, sin6_addr)},
-#endif
-	{PF_INET, sizeof(struct in_addr), sizeof(struct sockaddr_in),
-		offsetof(struct sockaddr_in, sin_addr)},
-	{0, 0, 0},
-};
-
-struct sockinet {
-	u_char	si_len;
-	u_char	si_family;
-	u_short	si_port;
-};
-
-#ifdef INET6
-static int ip6_parsenumeric(const struct sockaddr *, const char *, char *,
-	    size_t, int);
-static int ip6_sa2str(const struct sockaddr_in6 *, char *, size_t, int);
-#endif
-
-/* 2553bis: use EAI_xx for getnameinfo */
-#define ENI_NOSOCKET 	EAI_FAIL		/*XXX*/
-#define ENI_NOSERVNAME	EAI_NONAME
-#define ENI_NOHOSTNAME	EAI_NONAME
-#define ENI_MEMORY	EAI_MEMORY
-#define ENI_SYSTEM	EAI_SYSTEM
-#define ENI_FAMILY	EAI_FAMILY
-#define ENI_SALEN	EAI_FAMILY
-
-int
-getnameinfo(sa, salen, host, hostlen, serv, servlen, flags)
-	const struct sockaddr *sa;
-	socklen_t salen;
-	char *host;
-	size_t hostlen;
-	char *serv;
-	size_t servlen;
-	int flags;
-{
-	struct afd *afd;
-	struct servent *sp;
-	struct hostent *hp;
-	u_short port;
-	int family, i;
-	const char *addr;
-	u_int32_t v4a;
-	int h_error;
-	char numserv[512];
-	char numaddr[512];
-
-	if (sa == NULL)
-		return ENI_NOSOCKET;
-
-	family = sa->sa_family;
-	for (i = 0; afdl[i].a_af; i++)
-		if (afdl[i].a_af == family) {
-			afd = &afdl[i];
-			goto found;
-		}
-	return ENI_FAMILY;
-	
- found:
-	if (salen != afd->a_socklen)
-		return ENI_SALEN;
-	
-	/* network byte order */
-	port = ((const struct sockinet *)sa)->si_port;
-	addr = (const char *)sa + afd->a_off;
-
-	if (serv == NULL || servlen == 0) {
-		/*
-		 * do nothing in this case.
-		 * in case you are wondering if "&&" is more correct than
-		 * "||" here: RFC2553 says that serv == NULL OR servlen == 0
-		 * means that the caller does not want the result.
-		 */
-	} else {
-		if (flags & NI_NUMERICSERV)
-			sp = NULL;
-		else {
-			sp = getservbyport(port,
-				(flags & NI_DGRAM) ? "udp" : "tcp");
-		}
-		if (sp) {
-			if (strlen(sp->s_name) + 1 > servlen)
-				return ENI_MEMORY;
-			strcpy(serv, sp->s_name);
-		} else {
-			snprintf(numserv, sizeof(numserv), "%d", ntohs(port));
-			if (strlen(numserv) + 1 > servlen)
-				return ENI_MEMORY;
-			strcpy(serv, numserv);
-		}
-	}
-
-	switch (sa->sa_family) {
-	case AF_INET:
-		v4a = (u_int32_t)
-		    ntohl(((const struct sockaddr_in *)sa)->sin_addr.s_addr);
-		if (IN_MULTICAST(v4a) || IN_EXPERIMENTAL(v4a))
-			flags |= NI_NUMERICHOST;
-		v4a >>= IN_CLASSA_NSHIFT;
-		if (v4a == 0)
-			flags |= NI_NUMERICHOST;			
-		break;
-#ifdef INET6
-	case AF_INET6:
-	    {
-		const struct sockaddr_in6 *sin6;
-		sin6 = (const struct sockaddr_in6 *)sa;
-		switch (sin6->sin6_addr.s6_addr[0]) {
-		case 0x00:
-			if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr))
-				;
-			else if (IN6_IS_ADDR_LOOPBACK(&sin6->sin6_addr))
-				;
-			else
-				flags |= NI_NUMERICHOST;
-			break;
-		default:
-			if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
-				flags |= NI_NUMERICHOST;
-			}
-			else if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr))
-				flags |= NI_NUMERICHOST;
-			break;
-		}
-	    }
-		break;
-#endif
-	}
-	if (host == NULL || hostlen == 0) {
-		/*
-		 * do nothing in this case.
-		 * in case you are wondering if "&&" is more correct than
-		 * "||" here: RFC2553 says that host == NULL OR hostlen == 0
-		 * means that the caller does not want the result.
-		 */
-	} else if (flags & NI_NUMERICHOST) {
-		int numaddrlen;
-
-		/* NUMERICHOST and NAMEREQD conflicts with each other */
-		if (flags & NI_NAMEREQD)
-			return ENI_NOHOSTNAME;
-
-		switch(afd->a_af) {
-#ifdef INET6
-		case AF_INET6:
-		{
-			int error;
-
-			if ((error = ip6_parsenumeric(sa, addr, host,
-						      hostlen, flags)) != 0)
-				return(error);
-			break;
-		}
-#endif
-		default:
-			if (inet_ntop(afd->a_af, addr, numaddr, sizeof(numaddr))
-			    == NULL)
-				return ENI_SYSTEM;
-			numaddrlen = strlen(numaddr);
-			if (numaddrlen + 1 > hostlen) /* don't forget terminator */
-				return ENI_MEMORY;
-			strcpy(host, numaddr);
-			break;
-		}
-	} else {
-		hp = getipnodebyaddr(addr, afd->a_addrlen, afd->a_af, &h_error);
-
-		if (hp) {
-#if 0
-			/*
-			 * commented out, since "for local host" is not
-			 * implemented here - see RFC2553 p30
-			 */
-			if (flags & NI_NOFQDN) {
-				char *p;
-				p = strchr(hp->h_name, '.');
-				if (p)
-					*p = '\0';
-			}
-#endif
-			if (strlen(hp->h_name) + 1 > hostlen) {
-				freehostent(hp);
-				return ENI_MEMORY;
-			}
-			strcpy(host, hp->h_name);
-			freehostent(hp);
-		} else {
-			if (flags & NI_NAMEREQD)
-				return ENI_NOHOSTNAME;
-			switch(afd->a_af) {
-#ifdef INET6
-			case AF_INET6:
-			{
-				int error;
-
-				if ((error = ip6_parsenumeric(sa, addr, host,
-							      hostlen,
-							      flags)) != 0)
-					return(error);
-				break;
-			}
-#endif
-			default:
-				if (inet_ntop(afd->a_af, addr, host,
-				    hostlen) == NULL)
-					return ENI_SYSTEM;
-				break;
-			}
-		}
-	}
-	return SUCCESS;
-}
-
-#ifdef INET6
-static int
-ip6_parsenumeric(sa, addr, host, hostlen, flags)
-	const struct sockaddr *sa;
-	const char *addr;
-	char *host;
-	size_t hostlen;
-	int flags;
-{
-	int numaddrlen;
-	char numaddr[512];
-
-	if (inet_ntop(AF_INET6, addr, numaddr, sizeof(numaddr))
-	    == NULL)
-		return ENI_SYSTEM;
-
-	numaddrlen = strlen(numaddr);
-	if (numaddrlen + 1 > hostlen) /* don't forget terminator */
-		return ENI_MEMORY;
-	strcpy(host, numaddr);
-
-#ifdef NI_WITHSCOPEID
-	if (
-#ifdef DONT_OPAQUE_SCOPEID
-	    (IN6_IS_ADDR_LINKLOCAL((struct in6_addr *)addr) ||
-	     IN6_IS_ADDR_MULTICAST((struct in6_addr *)addr)) &&
-#endif
-	    ((const struct sockaddr_in6 *)sa)->sin6_scope_id) {
-#ifndef ALWAYS_WITHSCOPE
-		if (flags & NI_WITHSCOPEID)
-#endif /* !ALWAYS_WITHSCOPE */
-		{
-			char scopebuf[MAXHOSTNAMELEN];
-			int scopelen;
-
-			/* ip6_sa2str never fails */
-			scopelen = ip6_sa2str((const struct sockaddr_in6 *)sa,
-					      scopebuf, sizeof(scopebuf),
-					      flags);
-			if (scopelen + 1 + numaddrlen + 1 > hostlen)
-				return ENI_MEMORY;
-			/*
-			 * construct <numeric-addr><delim><scopeid>
-			 */
-			memcpy(host + numaddrlen + 1, scopebuf,
-			       scopelen);
-			host[numaddrlen] = SCOPE_DELIMITER;
-			host[numaddrlen + 1 + scopelen] = '\0';
-		}
-	}
-#endif /* NI_WITHSCOPEID */
-
-	return 0;
-}
-
-/* ARGSUSED */
-static int
-ip6_sa2str(sa6, buf, bufsiz, flags)
-	const struct sockaddr_in6 *sa6;
-	char *buf;
-	size_t bufsiz;
-	int flags;
-{
-	unsigned int ifindex = (unsigned int)sa6->sin6_scope_id;
-	const struct in6_addr *a6 = &sa6->sin6_addr;
-
-#ifdef NI_NUMERICSCOPE
-	if (flags & NI_NUMERICSCOPE) {
-		return(snprintf(buf, bufsiz, "%d", sa6->sin6_scope_id));
-	}
-#endif
-
-	/* if_indextoname() does not take buffer size.  not a good api... */
-	if ((IN6_IS_ADDR_LINKLOCAL(a6) || IN6_IS_ADDR_MC_LINKLOCAL(a6)) &&
-	    bufsiz >= IF_NAMESIZE) {
-		char *p = if_indextoname(ifindex, buf);
-		if (p) {
-			return(strlen(p));
-		}
-	}
-
-	/* last resort */
-	return(snprintf(buf, bufsiz, "%u", sa6->sin6_scope_id));
-}
-#endif /* INET6 */
diff --git a/newlib/libc/sys/linux/net/getnetbydns.c b/newlib/libc/sys/linux/net/getnetbydns.c
deleted file mode 100644
index 2cc4fce54..000000000
--- a/newlib/libc/sys/linux/net/getnetbydns.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*-
- * Copyright (c) 1985, 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-/* Portions Copyright (c) 1993 Carlos Leandro and Rui Salgueiro
- *	Dep. Matematica Universidade de Coimbra, Portugal, Europe
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)gethostnamadr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <stdio.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <ctype.h>
-#include <string.h>
-#include <unistd.h>
-#include <syslog.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-
-#include "res_config.h"
-
-extern int h_errno;
-
-#define BYADDR 0
-#define BYNAME 1
-#define	MAXALIASES	35
-
-#if PACKETSZ > 1024
-#define	MAXPACKET	PACKETSZ
-#else
-#define	MAXPACKET	1024
-#endif
-
-typedef union {
-	HEADER	hdr;
-	u_char	buf[MAXPACKET];
-} querybuf;
-
-typedef union {
-	long	al;
-	char	ac;
-} align;
-
-static struct netent *
-getnetanswer(answer, anslen, net_i)
-	querybuf *answer;
-	int anslen;
-	int net_i;
-{
-
-	HEADER *hp;
-	u_char *cp;
-	int n;
-	u_char *eom;
-	int type, class, buflen, ancount, qdcount, haveanswer, i, nchar;
-	char aux1[MAXHOSTNAMELEN], aux2[MAXHOSTNAMELEN], ans[MAXHOSTNAMELEN];
-	char *in, *st, *pauxt, *bp, **ap;
-	char *paux1 = &aux1[0], *paux2 = &aux2[0], flag = 0;
-static	struct netent net_entry;
-static	char *net_aliases[MAXALIASES], netbuf[PACKETSZ];
-
-	/*
-	 * find first satisfactory answer
-	 *
-	 *      answer --> +------------+  ( MESSAGE )
-	 *		   |   Header   |
-	 *		   +------------+
-	 *		   |  Question  | the question for the name server
-	 *		   +------------+
-	 *		   |   Answer   | RRs answering the question
-	 *		   +------------+
-	 *		   | Authority  | RRs pointing toward an authority
-	 *		   | Additional | RRs holding additional information
-	 *		   +------------+
-	 */
-	eom = answer->buf + anslen;
-	hp = &answer->hdr;
-	ancount = ntohs(hp->ancount); /* #/records in the answer section */
-	qdcount = ntohs(hp->qdcount); /* #/entries in the question section */
-	bp = netbuf;
-	buflen = sizeof(netbuf);
-	cp = answer->buf + HFIXEDSZ;
-	if (!qdcount) {
-		if (hp->aa)
-			h_errno = HOST_NOT_FOUND;
-		else
-			h_errno = TRY_AGAIN;
-		return (NULL);
-	}
-	while (qdcount-- > 0)
-		cp += __dn_skipname(cp, eom) + QFIXEDSZ;
-	ap = net_aliases;
-	*ap = NULL;
-	net_entry.n_aliases = net_aliases;
-	haveanswer = 0;
-	while (--ancount >= 0 && cp < eom) {
-		n = dn_expand(answer->buf, eom, cp, bp, buflen);
-		if ((n < 0) || !res_dnok(bp))
-			break;
-		cp += n;
-		ans[0] = '\0';
-		(void)strncpy(&ans[0], bp, sizeof(ans) - 1);
-		ans[sizeof(ans) - 1] = '\0';
-		GETSHORT(type, cp);
-		GETSHORT(class, cp);
-		cp += INT32SZ;		/* TTL */
-		GETSHORT(n, cp);
-		if (class == C_IN && type == T_PTR) {
-			n = dn_expand(answer->buf, eom, cp, bp, buflen);
-			if ((n < 0) || !res_hnok(bp)) {
-				cp += n;
-				return (NULL);
-			}
-			cp += n; 
-			*ap++ = bp;
-			bp += strlen(bp) + 1;
-			net_entry.n_addrtype =
-				(class == C_IN) ? AF_INET : AF_UNSPEC;
-			haveanswer++;
-		}
-	}
-	if (haveanswer) {
-		*ap = NULL;
-		switch (net_i) {
-		case BYADDR:
-			net_entry.n_name = *net_entry.n_aliases;
-			net_entry.n_net = 0L;
-			break;
-		case BYNAME:
-			in = *net_entry.n_aliases;
-			net_entry.n_name = &ans[0];
-			aux2[0] = '\0';
-			for (i = 0; i < 4; i++) {
-				for (st = in, nchar = 0;
-				     *st != '.';
-				     st++, nchar++)
-					;
-				if (nchar != 1 || *in != '0' || flag) {
-					flag = 1;
-					(void)strncpy(paux1,
-						      (i==0) ? in : in-1,
-						      (i==0) ?nchar : nchar+1);
-					paux1[(i==0) ? nchar : nchar+1] = '\0';
-					pauxt = paux2;
-					paux2 = strcat(paux1, paux2);
-					paux1 = pauxt;
-				}
-				in = ++st;
-			}		  
-			net_entry.n_net = inet_network(paux2);
-			break;
-		}
-		net_entry.n_aliases++;
-		return (&net_entry);
-	}
-	h_errno = TRY_AGAIN;
-	return (NULL);
-}
-
-int
-_dns_getnetbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	unsigned long net;
-	int net_type;
-	unsigned int netbr[4];
-	int nn, anslen;
-	querybuf buf;
-	char qbuf[MAXDNAME];
-	unsigned long net2;
-	struct netent *net_entry;
-
-	net = va_arg(ap, unsigned long);
-	net_type = va_arg(ap, int);
-
-	*(struct netent **)rval = NULL;
-
-	if (net_type != AF_INET)
-		return NS_UNAVAIL;
-
-	for (nn = 4, net2 = net; net2; net2 >>= 8)
-		netbr[--nn] = net2 & 0xff;
-	switch (nn) {
-	case 3: 	/* Class A */
-		sprintf(qbuf, "0.0.0.%u.in-addr.arpa", netbr[3]);
-		break;
-	case 2: 	/* Class B */
-		sprintf(qbuf, "0.0.%u.%u.in-addr.arpa", netbr[3], netbr[2]);
-		break;
-	case 1: 	/* Class C */
-		sprintf(qbuf, "0.%u.%u.%u.in-addr.arpa", netbr[3], netbr[2],
-		    netbr[1]);
-		break;
-	case 0: 	/* Class D - E */
-		sprintf(qbuf, "%u.%u.%u.%u.in-addr.arpa", netbr[3], netbr[2],
-		    netbr[1], netbr[0]);
-		break;
-	}
-	anslen = res_query(qbuf, C_IN, T_PTR, (u_char *)&buf, sizeof(buf));
-	if (anslen < 0) {
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf("res_query failed\n");
-#endif
-		return NS_UNAVAIL;
-	}
-	net_entry = getnetanswer(&buf, anslen, BYADDR);
-	if (net_entry) {
-		unsigned u_net = net;	/* maybe net should be unsigned ? */
-
-		/* Strip trailing zeros */
-		while ((u_net & 0xff) == 0 && u_net != 0)
-			u_net >>= 8;
-		net_entry->n_net = u_net;
-		*(struct netent **)rval = net_entry;
-		return NS_SUCCESS;
-	}
-	return NS_NOTFOUND;
-}
-
-int
-_dns_getnetbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *net;
-	int anslen;
-	querybuf buf;
-	char qbuf[MAXDNAME];
-
-	net = va_arg(ap, const char *);
-
-	*(struct netent**)rval = NULL;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return NS_UNAVAIL;
-	}
-	strncpy(qbuf, net, sizeof(qbuf) - 1);
-	qbuf[sizeof(qbuf) - 1] = '\0';
-	anslen = res_search(qbuf, C_IN, T_PTR, (u_char *)&buf, sizeof(buf));
-	if (anslen < 0) {
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf("res_query failed\n");
-#endif
-		return NS_UNAVAIL;
-	}
-	*(struct netent**)rval = getnetanswer(&buf, anslen, BYNAME);
-	return (*(struct netent**)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-void
-_setnetdnsent(stayopen)
-	int stayopen;
-{
-	if (stayopen)
-		_res.options |= RES_STAYOPEN | RES_USEVC;
-}
-
-void
-_endnetdnsent()
-{
-	_res.options &= ~(RES_STAYOPEN | RES_USEVC);
-	res_close();
-}
diff --git a/newlib/libc/sys/linux/net/getnetbyht.c b/newlib/libc/sys/linux/net/getnetbyht.c
deleted file mode 100644
index 8e4a16f1c..000000000
--- a/newlib/libc/sys/linux/net/getnetbyht.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/* Portions Copyright (c) 1993 Carlos Leandro and Rui Salgueiro
- *	Dep. Matematica Universidade de Coimbra, Portugal, Europe
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * from getnetent.c	1.1 (Coimbra) 93/06/02
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getnetent.c	8.1 (Berkeley) 6/4/93";
-static char orig_rcsid[] = "From: Id: getnetent.c,v 8.4 1997/06/01 20:34:37 vixie Exp";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-
-#define	MAXALIASES	35
-
-static FILE *netf;
-static char line[BUFSIZ+1];
-static struct netent net;
-static char *net_aliases[MAXALIASES];
-static int _net_stayopen;
-
-void
-_setnethtent(f)
-	int f;
-{
-
-	if (netf == NULL)
-		netf = fopen(_PATH_NETWORKS, "r" );
-	else
-		rewind(netf);
-	_net_stayopen |= f;
-}
-
-void
-_endnethtent()
-{
-
-	if (netf) {
-		fclose(netf);
-		netf = NULL;
-	}
-	_net_stayopen = 0;
-}
-
-struct netent *
-getnetent()
-{
-	char *p;
-	char *cp, **q;
-
-	if (netf == NULL && (netf = fopen(_PATH_NETWORKS, "r" )) == NULL)
-		return (NULL);
-again:
-	p = fgets(line, sizeof line, netf);
-	if (p == NULL)
-		return (NULL);
-	if (*p == '#')
-		goto again;
-	cp = strpbrk(p, "#\n");
-	if (cp == NULL)
-		goto again;
-	*cp = '\0';
-	net.n_name = p;
-	cp = strpbrk(p, " \t");
-	if (cp == NULL)
-		goto again;
-	*cp++ = '\0';
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	p = strpbrk(cp, " \t");
-	if (p != NULL)
-		*p++ = '\0';
-	net.n_net = inet_network(cp);
-	net.n_addrtype = AF_INET;
-	q = net.n_aliases = net_aliases;
-	if (p != NULL) 
-		cp = p;
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &net_aliases[MAXALIASES - 1])
-			*q++ = cp;
-		cp = strpbrk(cp, " \t");
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-	*q = NULL;
-	return (&net);
-}
-
-int
-_ht_getnetbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *name;
-	struct netent *p;
-	char **cp;
-
-	name = va_arg(ap, const char *);
-
-	setnetent(_net_stayopen);
-	while ( (p = getnetent()) ) {
-		if (strcasecmp(p->n_name, name) == 0)
-			break;
-		for (cp = p->n_aliases; *cp != 0; cp++)
-			if (strcasecmp(*cp, name) == 0)
-				goto found;
-	}
-found:
-	if (!_net_stayopen)
-		endnetent();
-	*(struct netent **)rval = p;
-	return (p != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-int
-_ht_getnetbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	unsigned long net;
-	int type;
-	struct netent *p;
-
-	net = va_arg(ap, unsigned long);
-	type = va_arg(ap, int);
-
-	setnetent(_net_stayopen);
-	while ( (p = getnetent()) )
-		if (p->n_addrtype == type && p->n_net == net)
-			break;
-	if (!_net_stayopen)
-		endnetent();
-	*(struct netent **)rval = p;
-	return (p != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
diff --git a/newlib/libc/sys/linux/net/getnetbynis.c b/newlib/libc/sys/linux/net/getnetbynis.c
deleted file mode 100644
index 6d222e60f..000000000
--- a/newlib/libc/sys/linux/net/getnetbynis.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*-
- * Copyright (c) 1994, Garrett Wollman
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <errno.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#include <arpa/nameser.h>
-#ifdef YP
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-#endif
-
-#define	MAXALIASES	35
-#define	MAXADDRS	35
-
-#ifdef YP
-static char *host_aliases[MAXALIASES];
-
-static struct netent *
-_getnetbynis(const char *name, char *map, int af)
-{
-	char *cp, **q;
-	static char *result;
-	int resultlen;
-	static struct netent h;
-	static char *domain = (char *)NULL;
-	static char ypbuf[YPMAXRECORD + 2];
-
-	switch(af) {
-	case AF_INET:
-		break;
-	default:
-	case AF_INET6:
-		errno = EAFNOSUPPORT;
-		return NULL;
-	}
-
-	if (domain == (char *)NULL)
-		if (yp_get_default_domain (&domain))
-			return (NULL);
-
-	if (yp_match(domain, map, name, strlen(name), &result, &resultlen))
-		return (NULL);
-
-	bcopy((char *)result, (char *)&ypbuf, resultlen);
-	ypbuf[resultlen] = '\0';
-	free(result);
-	result = (char *)&ypbuf;
-
-	if ((cp = index(result, '\n')))
-		*cp = '\0';
-
-	cp = strpbrk(result, " \t");
-	*cp++ = '\0';
-	h.n_name = result;
-
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-
-	h.n_net = inet_network(cp);
-	h.n_addrtype = AF_INET;
-
-	q = h.n_aliases = host_aliases;
-	cp = strpbrk(cp, " \t");
-	if (cp != NULL)
-		*cp++ = '\0';
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &host_aliases[MAXALIASES - 1])
-			*q++ = cp;
-		cp = strpbrk(cp, " \t");
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-	*q = NULL;
-	return (&h);
-}
-#endif /* YP */
-
-int
-_nis_getnetbyname(void *rval, void *cb_data, va_list ap)
-{
-#ifdef YP
-	const char *name;
-
-	name = va_arg(ap, const char *);
-	
-	*(struct netent **)rval = _getnetbynis(name, "networks.byname", AF_INET);
-	return (*(struct netent **)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-#else
-	return NS_UNAVAIL;
-#endif
-
-}
-
-int 
-_nis_getnetbyaddr(void *rval, void *cb_data, va_list ap)
-{
-#ifdef YP
-	unsigned long addr;
-	int af;
-	char *str, *cp;
-	unsigned long net2;
-	int nn;
-	unsigned int netbr[4];
-	char buf[MAXDNAME];
-
-	addr = va_arg(ap, unsigned long);
-	af = va_arg(ap, int);
-
-	*(struct netent **)rval = NULL;
-
-	if (af != AF_INET) {
-		errno = EAFNOSUPPORT;
-		return NS_UNAVAIL;
-	}
-
-        for (nn = 4, net2 = addr; net2; net2 >>= 8) {
-                netbr[--nn] = net2 & 0xff;
-	}
-
-	switch (nn) {
-	case 3:		/* Class A */
-		sprintf(buf, "%u", netbr[3]);
-		break;
-        case 2:		/* Class B */
-		sprintf(buf, "%u.%u", netbr[2], netbr[3]);
-		break;
-        case 1:		/* Class C */
-		sprintf(buf, "%u.%u.%u", netbr[1], netbr[2], netbr[3]);
-                break;
-        case 0:		/* Class D - E */
-		sprintf(buf, "%u.%u.%u.%u", netbr[0], netbr[1],
-			netbr[2], netbr[3]);
-		break;
-	}
-
-	str = (char *)&buf;
-	cp = str + (strlen(str) - 2);
-
-	while(!strcmp(cp, ".0")) {
-		*cp = '\0';
-		cp = str + (strlen(str) - 2);
-	}
-
-	*(struct netent **)rval = _getnetbynis(str, "networks.byaddr", af);
-	return (*(struct netent**)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-#else
-	return NS_UNAVAIL;
-#endif /* YP */
-}
diff --git a/newlib/libc/sys/linux/net/getnetent.3 b/newlib/libc/sys/linux/net/getnetent.3
deleted file mode 100644
index 6801e9707..000000000
--- a/newlib/libc/sys/linux/net/getnetent.3
+++ /dev/null
@@ -1,172 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)getnetent.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/getnetent.3,v 1.17 2002/01/14 16:59:01 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt GETNETENT 3
-.Os
-.Sh NAME
-.Nm getnetent ,
-.Nm getnetbyaddr ,
-.Nm getnetbyname ,
-.Nm setnetent ,
-.Nm endnetent
-.Nd get network entry
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In netdb.h
-.Ft struct netent *
-.Fn getnetent void
-.Ft struct netent *
-.Fn getnetbyname "const char *name"
-.Ft struct netent *
-.Fn getnetbyaddr "unsigned long net" "int type"
-.Ft void
-.Fn setnetent "int stayopen"
-.Ft void
-.Fn endnetent void
-.Sh DESCRIPTION
-The
-.Fn getnetent ,
-.Fn getnetbyname ,
-and
-.Fn getnetbyaddr
-functions
-each return a pointer to an object with the
-following structure describing an internet network.
-This structure contains either the information obtained
-from the nameserver,
-.Xr named 8 ,
-broken-out fields of a line in the network data base
-.Pa /etc/networks ,
-or entries supplied by the
-.Xr yp 8
-system.  The order of the lookups is controlled by the
-`networks' entry in
-.Xr nsswitch.conf 5 .
-.Pp
-.Bd -literal -offset indent
-struct	netent {
-	char		*n_name;	/* official name of net */
-	char		**n_aliases;	/* alias list */
-	int		n_addrtype;	/* net number type */
-	unsigned long	n_net;		/* net number */
-};
-.Ed
-.Pp
-The members of this structure are:
-.Bl -tag -width n_addrtype
-.It Fa n_name
-The official name of the network.
-.It Fa n_aliases
-A zero terminated list of alternate names for the network.
-.It Fa n_addrtype
-The type of the network number returned; currently only AF_INET.
-.It Fa n_net
-The network number.  Network numbers are returned in machine byte
-order.
-.El
-.Pp
-The
-.Fn getnetent
-function
-reads the next line of the file, opening the file if necessary.
-.Pp
-The
-.Fn setnetent
-function
-opens and rewinds the file.  If the
-.Fa stayopen
-flag is non-zero,
-the net data base will not be closed after each call to
-.Fn getnetbyname
-or
-.Fn getnetbyaddr .
-.Pp
-The
-.Fn endnetent
-function
-closes the file.
-.Pp
-The
-.Fn getnetbyname
-function
-and
-.Fn getnetbyaddr
-sequentially search from the beginning
-of the file until a matching
-net name or
-net address and type is found,
-or until
-.Dv EOF
-is encountered.
-The
-.Fa type
-must be
-.Dv AF_INET .
-Network numbers are supplied in host order.
-.Sh FILES
-.Bl -tag -width /etc/nsswitch.conf -compact
-.It Pa /etc/networks
-.It Pa /etc/nsswitch.conf
-.It Pa /etc/resolv.conf
-.El
-.Sh DIAGNOSTICS
-Null pointer
-(0) returned on
-.Dv EOF
-or error.
-.Sh SEE ALSO
-.Xr networks 5
-.Pp
-.%T RFC 1101
-.Sh HISTORY
-The
-.Fn getnetent ,
-.Fn getnetbyaddr ,
-.Fn getnetbyname ,
-.Fn setnetent ,
-and
-.Fn endnetent
-functions appeared in
-.Bx 4.2 .
-.Sh BUGS
-The data space used by
-these functions is static; if future use requires the data, it should be
-copied before any subsequent calls to these functions overwrite it.
-Only Internet network
-numbers are currently understood.
-Expecting network numbers to fit
-in no more than 32 bits is probably
-naive.
diff --git a/newlib/libc/sys/linux/net/getnetnamadr.c b/newlib/libc/sys/linux/net/getnetnamadr.c
deleted file mode 100644
index 180ab14e2..000000000
--- a/newlib/libc/sys/linux/net/getnetnamadr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*-
- * Copyright (c) 1994, Garrett Wollman
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-
-extern int _ht_getnetbyname(void *, void *, va_list);
-extern int _dns_getnetbyname(void *, void *, va_list);
-extern int _nis_getnetbyname(void *, void *, va_list);
-extern int _ht_getnetbyaddr(void *, void *, va_list);
-extern int _dns_getnetbyaddr(void *, void *, va_list);
-extern int _nis_getnetbyaddr(void *, void *, va_list);
-
-/* Network lookup order if nsswitch.conf is broken or nonexistant */
-static const ns_src default_src[] = { 
-	{ NSSRC_FILES, NS_SUCCESS },
-	{ NSSRC_DNS, NS_SUCCESS },
-	{ 0 }
-};
-
-struct netent *
-getnetbyname(const char *name)
-{
-	struct netent *hp = 0;
-	int rval;
-
-
-	static const ns_dtab dtab[] = {
-		NS_FILES_CB(_ht_getnetbyname, NULL)
-		{ NSSRC_DNS, _dns_getnetbyname, NULL },
-		NS_NIS_CB(_nis_getnetbyname, NULL) /* force -DHESIOD */
-		{ 0 }
-	};       
-	
-	rval = nsdispatch((void *)&hp, dtab, NSDB_NETWORKS, "getnetbyname",
-			  default_src, name);
-
-	if (rval != NS_SUCCESS)
-		return NULL;
-	else
-		return hp;
-}
-
-struct netent *
-getnetbyaddr(u_long addr, int af)
-{
-	struct netent *hp = 0;
-	int rval;
-
-	static const ns_dtab dtab[] = {
-		NS_FILES_CB(_ht_getnetbyaddr, NULL)
-		{ NSSRC_DNS, _dns_getnetbyaddr, NULL },
-		NS_NIS_CB(_nis_getnetbyaddr, NULL) /* force -DHESIOD */
-		{ 0 }
-	};       
-
-	rval = nsdispatch((void *)&hp, dtab, NSDB_NETWORKS, "getnetbyaddr",
-			  default_src, addr, af);
-
-	if (rval != NS_SUCCESS)
-		return NULL;
-	else
-		return hp;
-}
-
-void
-setnetent(stayopen)
-	int stayopen;
-{
-	_setnethtent(stayopen);
-	_setnetdnsent(stayopen);
-}
-
-void
-endnetent()
-{
-	_endnethtent();
-	_endnetdnsent();
-}
diff --git a/newlib/libc/sys/linux/net/getproto.c b/newlib/libc/sys/linux/net/getproto.c
deleted file mode 100644
index 937c30732..000000000
--- a/newlib/libc/sys/linux/net/getproto.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getproto.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <netdb.h>
-
-extern int _proto_stayopen;
-
-struct protoent *
-getprotobynumber(proto)
-	int proto;
-{
-	struct protoent *p;
-
-	setprotoent(_proto_stayopen);
-	while ( (p = getprotoent()) )
-		if (p->p_proto == proto)
-			break;
-	if (!_proto_stayopen)
-		endprotoent();
-	return (p);
-}
diff --git a/newlib/libc/sys/linux/net/getprotoent.3 b/newlib/libc/sys/linux/net/getprotoent.3
deleted file mode 100644
index 18b56541b..000000000
--- a/newlib/libc/sys/linux/net/getprotoent.3
+++ /dev/null
@@ -1,149 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)getprotoent.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/getprotoent.3,v 1.8 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt GETPROTOENT 3
-.Os
-.Sh NAME
-.Nm getprotoent ,
-.Nm getprotobynumber ,
-.Nm getprotobyname ,
-.Nm setprotoent ,
-.Nm endprotoent
-.Nd get protocol entry
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In netdb.h
-.Ft struct protoent *
-.Fn getprotoent void
-.Ft struct protoent *
-.Fn getprotobyname "const char *name"
-.Ft struct protoent *
-.Fn getprotobynumber "int proto"
-.Ft void
-.Fn setprotoent "int stayopen"
-.Ft void
-.Fn endprotoent void
-.Sh DESCRIPTION
-The
-.Fn getprotoent ,
-.Fn getprotobyname ,
-and
-.Fn getprotobynumber
-functions
-each return a pointer to an object with the
-following structure
-containing the broken-out
-fields of a line in the network protocol data base,
-.Pa /etc/protocols .
-.Bd -literal -offset indent
-.Pp
-struct	protoent {
-	char	*p_name;	/* official name of protocol */
-	char	**p_aliases;	/* alias list */
-	int	p_proto;	/* protocol number */
-};
-.Ed
-.Pp
-The members of this structure are:
-.Bl -tag -width p_aliases
-.It Fa p_name
-The official name of the protocol.
-.It Fa p_aliases
-A zero terminated list of alternate names for the protocol.
-.It Fa p_proto
-The protocol number.
-.El
-.Pp
-The
-.Fn getprotoent
-function
-reads the next line of the file, opening the file if necessary.
-.Pp
-The
-.Fn setprotoent
-function
-opens and rewinds the file.  If the
-.Fa stayopen
-flag is non-zero,
-the net data base will not be closed after each call to
-.Fn getprotobyname
-or
-.Fn getprotobynumber .
-.Pp
-The
-.Fn endprotoent
-function
-closes the file.
-.Pp
-The
-.Fn getprotobyname
-function
-and
-.Fn getprotobynumber
-sequentially search from the beginning
-of the file until a matching
-protocol name or
-protocol number is found,
-or until
-.Dv EOF
-is encountered.
-.Sh RETURN VALUES
-Null pointer
-(0) returned on
-.Dv EOF
-or error.
-.Sh FILES
-.Bl -tag -width /etc/protocols -compact
-.It Pa /etc/protocols
-.El
-.Sh SEE ALSO
-.Xr protocols 5
-.Sh HISTORY
-The
-.Fn getprotoent ,
-.Fn getprotobynumber ,
-.Fn getprotobyname ,
-.Fn setprotoent ,
-and
-.Fn endprotoent
-functions appeared in
-.Bx 4.2 .
-.Sh BUGS
-These functions use a static data space;
-if the data is needed for future use, it should be
-copied before any subsequent calls overwrite it.
-Only the Internet
-protocols are currently understood.
diff --git a/newlib/libc/sys/linux/net/getprotoent.c b/newlib/libc/sys/linux/net/getprotoent.c
deleted file mode 100644
index 422eeacea..000000000
--- a/newlib/libc/sys/linux/net/getprotoent.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getprotoent.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#define	MAXALIASES	35
-
-static FILE *protof = NULL;
-static char line[BUFSIZ+1];
-static struct protoent proto;
-static char *proto_aliases[MAXALIASES];
-int _proto_stayopen;
-
-void
-setprotoent(f)
-	int f;
-{
-	if (protof == NULL)
-		protof = fopen(_PATH_PROTOCOLS, "r" );
-	else
-		rewind(protof);
-	_proto_stayopen |= f;
-}
-
-void
-endprotoent()
-{
-	if (protof) {
-		fclose(protof);
-		protof = NULL;
-	}
-	_proto_stayopen = 0;
-}
-
-struct protoent *
-getprotoent()
-{
-	char *p;
-	char *cp, **q;
-
-	if (protof == NULL && (protof = fopen(_PATH_PROTOCOLS, "r" )) == NULL)
-		return (NULL);
-again:
-	if ((p = fgets(line, BUFSIZ, protof)) == NULL)
-		return (NULL);
-	if (*p == '#')
-		goto again;
-	cp = strpbrk(p, "#\n");
-	if (cp == NULL)
-		goto again;
-	*cp = '\0';
-	proto.p_name = p;
-	cp = strpbrk(p, " \t");
-	if (cp == NULL)
-		goto again;
-	*cp++ = '\0';
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	p = strpbrk(cp, " \t");
-	if (p != NULL)
-		*p++ = '\0';
-	proto.p_proto = atoi(cp);
-	q = proto.p_aliases = proto_aliases;
-	if (p != NULL) {
-		cp = p;
-		while (cp && *cp) {
-			if (*cp == ' ' || *cp == '\t') {
-				cp++;
-				continue;
-			}
-			if (q < &proto_aliases[MAXALIASES - 1])
-				*q++ = cp;
-			cp = strpbrk(cp, " \t");
-			if (cp != NULL)
-				*cp++ = '\0';
-		}
-	}
-	*q = NULL;
-	return (&proto);
-}
diff --git a/newlib/libc/sys/linux/net/getprotoname.c b/newlib/libc/sys/linux/net/getprotoname.c
deleted file mode 100644
index f25883fe8..000000000
--- a/newlib/libc/sys/linux/net/getprotoname.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getprotoname.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <netdb.h>
-#include <string.h>
-
-extern int _proto_stayopen;
-
-struct protoent *
-getprotobyname(name)
-	const char *name;
-{
-	struct protoent *p;
-	char **cp;
-
-	setprotoent(_proto_stayopen);
-	while ( (p = getprotoent()) ) {
-		if (strcmp(p->p_name, name) == 0)
-			break;
-		for (cp = p->p_aliases; *cp != 0; cp++)
-			if (strcmp(*cp, name) == 0)
-				goto found;
-	}
-found:
-	if (!_proto_stayopen)
-		endprotoent();
-	return (p);
-}
diff --git a/newlib/libc/sys/linux/net/getservbyname.c b/newlib/libc/sys/linux/net/getservbyname.c
deleted file mode 100644
index ced03d617..000000000
--- a/newlib/libc/sys/linux/net/getservbyname.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getservbyname.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <netdb.h>
-#include <string.h>
-
-extern int _serv_stayopen;
-
-struct servent *
-getservbyname(name, proto)
-	const char *name, *proto;
-{
-	struct servent *p;
-	char **cp;
-
-#ifdef YP
-	extern char *___getservbyname_yp;
-	extern char *___getservbyproto_yp;
-
-	___getservbyname_yp = (char *)name;
-	___getservbyproto_yp = (char *)proto;
-#endif
-
-	setservent(_serv_stayopen);
-	while ( (p = getservent()) ) {
-		if (strcmp(name, p->s_name) == 0)
-			goto gotname;
-		for (cp = p->s_aliases; *cp; cp++)
-			if (strcmp(name, *cp) == 0)
-				goto gotname;
-		continue;
-gotname:
-		if (proto == 0 || strcmp(p->s_proto, proto) == 0)
-			break;
-	}
-	if (!_serv_stayopen)
-		endservent();
-
-#ifdef YP
-	___getservbyname_yp = NULL;
-	___getservbyproto_yp = NULL;
-#endif
-
-	return (p);
-}
diff --git a/newlib/libc/sys/linux/net/getservbyport.c b/newlib/libc/sys/linux/net/getservbyport.c
deleted file mode 100644
index 88b684da4..000000000
--- a/newlib/libc/sys/linux/net/getservbyport.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getservbyport.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <netdb.h>
-#include <string.h>
-
-extern int _serv_stayopen;
-
-struct servent *
-getservbyport(port, proto)
-	int port;
-	const char *proto;
-{
-	struct servent *p;
-
-#ifdef YP
-	extern int ___getservbyport_yp;
-	extern char *___getservbyproto_yp;
-
-	___getservbyport_yp = port;
-	___getservbyproto_yp = (char *)proto;
-#endif
-
-	setservent(_serv_stayopen);
-	while ( (p = getservent()) ) {
-		if (p->s_port != port)
-			continue;
-		if (proto == 0 || strcmp(p->s_proto, proto) == 0)
-			break;
-	}
-	if (!_serv_stayopen)
-		endservent();
-
-#ifdef YP
-	___getservbyport_yp = 0;
-	___getservbyproto_yp = NULL;
-#endif
-
-	return (p);
-}
diff --git a/newlib/libc/sys/linux/net/getservent.3 b/newlib/libc/sys/linux/net/getservent.3
deleted file mode 100644
index 3d398bdb1..000000000
--- a/newlib/libc/sys/linux/net/getservent.3
+++ /dev/null
@@ -1,158 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)getservent.3	8.3 (Berkeley) 1/12/94
-.\" $FreeBSD: src/lib/libc/net/getservent.3,v 1.12 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd July 9, 1995
-.Dt GETSERVENT 3
-.Os
-.Sh NAME
-.Nm getservent ,
-.Nm getservbyport ,
-.Nm getservbyname ,
-.Nm setservent ,
-.Nm endservent
-.Nd get service entry
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In netdb.h
-.Ft struct servent *
-.Fn getservent
-.Ft struct servent *
-.Fn getservbyname "const char *name" "const char *proto"
-.Ft struct servent *
-.Fn getservbyport "int port" "const char *proto"
-.Ft void
-.Fn setservent "int stayopen"
-.Ft void
-.Fn endservent void
-.Sh DESCRIPTION
-The
-.Fn getservent ,
-.Fn getservbyname ,
-and
-.Fn getservbyport
-functions
-each return a pointer to an object with the
-following structure
-containing the broken-out
-fields of a line in the network services data base,
-.Pa /etc/services .
-.Bd -literal -offset indent
-struct	servent {
-	char	*s_name;	/* official name of service */
-	char	**s_aliases;	/* alias list */
-	int	s_port;		/* port service resides at */
-	char	*s_proto;	/* protocol to use */
-};
-.Ed
-.Pp
-The members of this structure are:
-.Bl -tag -width s_aliases
-.It Fa s_name
-The official name of the service.
-.It Fa s_aliases
-A zero terminated list of alternate names for the service.
-.It Fa s_port
-The port number at which the service resides.
-Port numbers are returned in network byte order.
-.It Fa s_proto
-The name of the protocol to use when contacting the
-service.
-.El
-.Pp
-The
-.Fn getservent
-function
-reads the next line of the file, opening the file if necessary.
-.Pp
-The
-.Fn setservent
-function
-opens and rewinds the file.  If the
-.Fa stayopen
-flag is non-zero,
-the net data base will not be closed after each call to
-.Fn getservbyname
-or
-.Fn getservbyport .
-.Pp
-The
-.Fn endservent
-function
-closes the file.
-.Pp
-The
-.Fn getservbyname
-and
-.Fn getservbyport
-functions
-sequentially search from the beginning
-of the file until a matching
-protocol name or
-port number (which must be specified in
-network byte order) is found,
-or until
-.Dv EOF
-is encountered.
-If a protocol name is also supplied (non-
-.Dv NULL ) ,
-searches must also match the protocol.
-.Sh FILES
-.Bl -tag -width /etc/services -compact
-.It Pa /etc/services
-.El
-.Sh DIAGNOSTICS
-Null pointer
-(0) returned on
-.Dv EOF
-or error.
-.Sh SEE ALSO
-.Xr getprotoent 3 ,
-.Xr services 5
-.Sh HISTORY
-The
-.Fn getservent ,
-.Fn getservbyport ,
-.Fn getservbyname ,
-.Fn setservent ,
-and
-.Fn endservent
-functions appeared in
-.Bx 4.2 .
-.Sh BUGS
-These functions use static data storage;
-if the data is needed for future use, it should be
-copied before any subsequent calls overwrite it.
-Expecting port numbers to fit in a 32 bit
-quantity is probably naive.
diff --git a/newlib/libc/sys/linux/net/getservent.c b/newlib/libc/sys/linux/net/getservent.c
deleted file mode 100644
index 1c26df75c..000000000
--- a/newlib/libc/sys/linux/net/getservent.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getservent.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#ifdef YP
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-static int serv_stepping_yp = 0;
-extern int _yp_check( char ** );
-#endif
-
-
-#define	MAXALIASES	35
-
-static FILE *servf = NULL;
-static char line[BUFSIZ+1];
-static struct servent serv;
-static char *serv_aliases[MAXALIASES];
-int _serv_stayopen;
-
-#ifdef YP
-char *___getservbyname_yp = NULL;
-char *___getservbyproto_yp = NULL;
-int ___getservbyport_yp = 0;
-static char *yp_domain = NULL;
-
-static int
-_getservbyport_yp(line)
-	char *line;
-{
-	char *result;
-	int resultlen;
-	char buf[YPMAXRECORD + 2];
-	int rv;
-
-	snprintf(buf, sizeof(buf), "%d/%s", ntohs(___getservbyport_yp),
-						___getservbyproto_yp);
-
-	___getservbyport_yp = 0;
-	___getservbyproto_yp = NULL;
-
-	if(!yp_domain) {
-		if(yp_get_default_domain(&yp_domain))
-			return (0);
-	}
-
-	/*
-	 * We have to be a little flexible here. Ideally you're supposed
-	 * to have both a services.byname and a services.byport map, but
-	 * some systems have only services.byname. FreeBSD cheats a little
-	 * by putting the services.byport information in the same map as
-	 * services.byname so that either case will work. We allow for both
-	 * possibilities here: if there is no services.byport map, we try
-	 * services.byname instead.
-	 */
-	if ((rv = yp_match(yp_domain, "services.byport", buf, strlen(buf),
-						&result, &resultlen))) {
-		if (rv == YPERR_MAP) {
-			if (yp_match(yp_domain, "services.byname", buf,
-					strlen(buf), &result, &resultlen))
-			return(0);
-		} else
-			return(0);
-	}
-		
-	/* getservent() expects lines terminated with \n -- make it happy */
-	snprintf(line, BUFSIZ, "%.*s\n", resultlen, result);
-
-	free(result);
-	return(1);
-}
-
-static int
-_getservbyname_yp(line)
-	char *line;
-{
-	char *result;
-	int resultlen;
-	char buf[YPMAXRECORD + 2];
-
-	if(!yp_domain) {
-		if(yp_get_default_domain(&yp_domain))
-			return (0);
-	}
-
-	snprintf(buf, sizeof(buf), "%s/%s", ___getservbyname_yp,
-						___getservbyproto_yp);
-
-	___getservbyname_yp = 0;
-	___getservbyproto_yp = NULL;
-
-	if (yp_match(yp_domain, "services.byname", buf, strlen(buf),
-						&result, &resultlen)) {
-		return(0);
-	}
-		
-	/* getservent() expects lines terminated with \n -- make it happy */
-	snprintf(line, BUFSIZ, "%.*s\n", resultlen, result);
-
-	free(result);
-	return(1);
-}
-
-static int
-_getservent_yp(line)
-	char *line;
-{
-	static char *key = NULL;
-	static int keylen;
-	char *lastkey, *result;
-	int resultlen;
-	int rv;
-
-	if(!yp_domain) {
-		if(yp_get_default_domain(&yp_domain))
-			return (0);
-	}
-
-	if (!serv_stepping_yp) {
-		if (key)
-			free(key);
-		if ((rv = yp_first(yp_domain, "services.byname", &key, &keylen,
-			     &result, &resultlen))) {
-			serv_stepping_yp = 0;
-			return(0);
-		}
-		serv_stepping_yp = 1;
-	} else {
-		lastkey = key;
-		rv = yp_next(yp_domain, "services.byname", key, keylen, &key,
-			     &keylen, &result, &resultlen);
-		free(lastkey);
-		if (rv) {
-			serv_stepping_yp = 0;
-			return (0);
-		}
-	}
-
-	/* getservent() expects lines terminated with \n -- make it happy */
-	snprintf(line, BUFSIZ, "%.*s\n", resultlen, result);
-
-	free(result);
-
-	return(1);
-}
-#endif
-
-void
-setservent(f)
-	int f;
-{
-	if (servf == NULL)
-		servf = fopen(_PATH_SERVICES, "r" );
-	else
-		rewind(servf);
-	_serv_stayopen |= f;
-}
-
-void
-endservent()
-{
-	if (servf) {
-		fclose(servf);
-		servf = NULL;
-	}
-	_serv_stayopen = 0;
-}
-
-struct servent *
-getservent()
-{
-	char *p;
-	char *cp, **q;
-
-#ifdef YP
-	if (serv_stepping_yp && _getservent_yp(line)) {
-		p = (char *)&line;
-		goto unpack;
-	}
-tryagain:
-#endif
-	if (servf == NULL && (servf = fopen(_PATH_SERVICES, "r" )) == NULL)
-		return (NULL);
-again:
-	if ((p = fgets(line, BUFSIZ, servf)) == NULL)
-		return (NULL);
-#ifdef YP
-	if (*p == '+' && _yp_check(NULL)) {
-		if (___getservbyname_yp != NULL) {
-			if (!_getservbyname_yp(line))
-				goto tryagain;
-		} 
-		else if (___getservbyport_yp != 0) {
-			if (!_getservbyport_yp(line))
-				goto tryagain;
-		}
-		else if (!_getservent_yp(line))
-			goto tryagain;
-	}
-unpack:
-#endif
-	if (*p == '#')
-		goto again;
-	cp = strpbrk(p, "#\n");
-	if (cp == NULL)
-		goto again;
-	*cp = '\0';
-	serv.s_name = p;
-	p = strpbrk(p, " \t");
-	if (p == NULL)
-		goto again;
-	*p++ = '\0';
-	while (*p == ' ' || *p == '\t')
-		p++;
-	cp = strpbrk(p, ",/");
-	if (cp == NULL)
-		goto again;
-	*cp++ = '\0';
-	serv.s_port = htons((u_short)atoi(p));
-	serv.s_proto = cp;
-	q = serv.s_aliases = serv_aliases;
-	cp = strpbrk(cp, " \t");
-	if (cp != NULL)
-		*cp++ = '\0';
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &serv_aliases[MAXALIASES - 1])
-			*q++ = cp;
-		cp = strpbrk(cp, " \t");
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-	*q = NULL;
-	return (&serv);
-}
diff --git a/newlib/libc/sys/linux/net/herror.c b/newlib/libc/sys/linux/net/herror.c
deleted file mode 100644
index 0edec9890..000000000
--- a/newlib/libc/sys/linux/net/herror.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) 1987, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)herror.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/uio.h>
-#include <netdb.h>
-#include <string.h>
-#include <unistd.h>
-#include "un-namespace.h"
-
-const char *h_errlist[] = {
-	"Resolver Error 0 (no error)",
-	"Unknown host",				/* 1 HOST_NOT_FOUND */
-	"Host name lookup failure",		/* 2 TRY_AGAIN */
-	"Unknown server error",			/* 3 NO_RECOVERY */
-	"No address associated with name",	/* 4 NO_ADDRESS */
-};
-int	h_nerr = { sizeof h_errlist / sizeof h_errlist[0] };
-
-int	h_errno;
-
-/*
- * herror --
- *	print the error indicated by the h_errno value.
- */
-void
-herror(s)
-	const char *s;
-{
-	char *ptr;
-	if (s && *s) {
-		write(STDERR_FILENO, s, strlen(s));
-		write(STDERR_FILENO, ": ", 2);
-	}
-        ptr = (char *)hstrerror(h_errno);
-	write(STDERR_FILENO, ptr, strlen(ptr));
-	write(STDERR_FILENO, "\n", 1);
-}
-
-const char *
-hstrerror(err)
-	int err;
-{
-	if (err < 0)
-		return ("Resolver internal error");
-	else if (err < h_nerr)
-		return (h_errlist[err]);
-	return ("Unknown resolver error");
-}
diff --git a/newlib/libc/sys/linux/net/hesiod.3 b/newlib/libc/sys/linux/net/hesiod.3
deleted file mode 100644
index 8de1f9247..000000000
--- a/newlib/libc/sys/linux/net/hesiod.3
+++ /dev/null
@@ -1,159 +0,0 @@
-.\"	$NetBSD: hesiod.3,v 1.1 1999/01/25 03:43:04 lukem Exp $
-.\"	$FreeBSD: src/lib/libc/net/hesiod.3,v 1.3 2001/10/01 16:08:55 ru Exp $
-.\"
-.\" from: #Id: hesiod.3,v 1.9.2.1 1997/01/03 21:02:23 ghudson Exp #
-.\"
-.\" Copyright 1988, 1996 by the Massachusetts Institute of Technology.
-.\"
-.\" Permission to use, copy, modify, and distribute this
-.\" software and its documentation for any purpose and without
-.\" fee is hereby granted, provided that the above copyright
-.\" notice appear in all copies and that both that copyright
-.\" notice and this permission notice appear in supporting
-.\" documentation, and that the name of M.I.T. not be used in
-.\" advertising or publicity pertaining to distribution of the
-.\" software without specific, written prior permission.
-.\" M.I.T. makes no representations about the suitability of
-.\" this software for any purpose.  It is provided "as is"
-.\" without express or implied warranty.
-.\"
-.Dd November 30, 1996
-.Dt HESIOD 3
-.Os
-.Sh NAME
-.Nm hesiod ,
-.Nm hesiod_init ,
-.Nm hesiod_resolve ,
-.Nm hesiod_free_list ,
-.Nm hesiod_to_bind ,
-.Nm hesiod_end
-.Nd Hesiod name server interface library
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In hesiod.h
-.Ft int
-.Fn hesiod_init "void **context"
-.Ft char **
-.Fn hesiod_resolve "void *context" "const char *name" "const char *type"
-.Ft void
-.Fn hesiod_free_list "void *context" "char **list"
-.Ft char *
-.Fn hesiod_to_bind "void *context" "const char *name" "const char *type"
-.Ft void
-.Fn hesiod_end "void *context"
-.Sh DESCRIPTION
-This family of functions allows you to perform lookups of Hesiod
-information, which is stored as text records in the Domain Name
-Service.
-To perform lookups, you must first initialize a
-.Fa context ,
-an opaque object which stores information used internally by the
-library between calls.
-.Fn hesiod_init
-initializes a context, storing a pointer to the context in the
-location pointed to by the
-.Fa context
-argument.
-.Fn hesiod_end
-frees the resources used by a context.
-.Pp
-.Fn hesiod_resolve
-is the primary interface to the library.
-If successful, it returns a
-list of one or more strings giving the records matching
-.Fa name
-and
-.Fa type .
-The last element of the list is followed by a
-.Dv NULL
-pointer.
-It is the
-caller's responsibility to call
-.Fn hesiod_free_list
-to free the resources used by the returned list.
-.Pp
-.Fn hesiod_to_bind
-converts
-.Fa name
-and
-.Fa type
-into the DNS name used by
-.Fn hesiod_resolve .
-It is the caller's responsibility to free the returned string using
-.Fn free .
-.Sh RETURN VALUES
-.Rv -std hesiod_init
-On failure,
-.Fn hesiod_resolve
-and
-.Fn hesiod_to_bind
-return
-.Dv NULL
-and set the global variable
-.Va errno
-to indicate the error.
-.Sh ENVIRONMENT
-.Bl -tag -width HESIOD_CONFIG
-.It Ev HES_DOMAIN
-If the environment variable
-.Ev HES_DOMAIN
-is set, it will override the domain in the Hesiod configuration file.
-.It Ev HESIOD_CONFIG
-If the environment variable
-.Ev HESIOD_CONFIG
-is set, it specifies the location of the Hesiod configuration file.
-.El
-.Sh SEE ALSO
-.Xr hesiod.conf 5 ,
-.Xr named 8
-.Rs
-.%T "Hesiod - Project Athena Technical Plan -- Name Service"
-.Re
-.Sh ERRORS
-Hesiod calls may fail because of:
-.Bl -tag -width Er
-.It Bq Er ENOMEM
-Insufficient memory was available to carry out the requested
-operation.
-.It Bq Er ENOEXEC
-.Fn hesiod_init
-failed because the Hesiod configuration file was invalid.
-.It Bq Er ECONNREFUSED
-.Fn hesiod_resolve
-failed because no name server could be contacted to answer the query.
-.It Bq Er EMSGSIZE
-.Fn hesiod_resolve
-or
-.Fn hesiod_to_bind
-failed because the query or response was too big to fit into the
-packet buffers.
-.It Bq Er ENOENT
-.Fn hesiod_resolve
-failed because the name server had no text records matching
-.Fa name
-and
-.Fa type ,
-or
-.Fn hesiod_to_bind
-failed because the
-.Fa name
-argument had a domain extension which could not be resolved with type
-.Dq rhs\-extension
-in the local Hesiod domain.
-.El
-.Sh AUTHORS
-.An Steve Dyer ,
-IBM/Project Athena
-.An Greg Hudson ,
-MIT Team Athena
-.Pp
-Copyright 1987, 1988, 1995, 1996 by the Massachusetts Institute of Technology.
-.Sh BUGS
-The strings corresponding to the
-.Va errno
-values set by the Hesiod functions are not particularly indicative of
-what went wrong, especially for
-.Er ENOEXEC
-and
-.Er ENOENT .
diff --git a/newlib/libc/sys/linux/net/hesiod.c b/newlib/libc/sys/linux/net/hesiod.c
deleted file mode 100644
index 909c09440..000000000
--- a/newlib/libc/sys/linux/net/hesiod.c
+++ /dev/null
@@ -1,600 +0,0 @@
-/*	$NetBSD: hesiod.c,v 1.9 1999/02/11 06:16:38 simonb Exp $	*/
-
-/* Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/* Copyright 1996 by the Massachusetts Institute of Technology.
- *
- * Permission to use, copy, modify, and distribute this
- * software and its documentation for any purpose and without
- * fee is hereby granted, provided that the above copyright
- * notice appear in all copies and that both that copyright
- * notice and this permission notice appear in supporting
- * documentation, and that the name of M.I.T. not be used in
- * advertising or publicity pertaining to distribution of the
- * software without specific, written prior permission.
- * M.I.T. makes no representations about the suitability of
- * this software for any purpose.  It is provided "as is"
- * without express or implied warranty.
- */
-
-/* This file is part of the hesiod library.  It implements the core
- * portion of the hesiod resolver.
- *
- * This file is loosely based on an interim version of hesiod.c from
- * the BIND IRS library, which was in turn based on an earlier version
- * of this file.  Extensive changes have been made on each step of the
- * path.
- *
- * This implementation is not truly thread-safe at the moment because
- * it uses res_send() and accesses _res.
- */
-
-#include <sys/cdefs.h>
-
-#if 0
-static char *orig_rcsid = "$NetBSD: hesiod.c,v 1.9 1999/02/11 06:16:38 simonb Exp $";
-#endif
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <hesiod.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-struct hesiod_p {
-	char	*lhs;			/* normally ".ns" */
-	char	*rhs;			/* AKA the default hesiod domain */
-	int	 classes[2];		/* The class search order. */
-};
-
-#define	MAX_HESRESP	1024
-
-static int	  read_config_file(struct hesiod_p *, const char *);
-static char	**get_txt_records(int, const char *);
-static int	  init_context(void);
-static void	  translate_errors(void);
-
-
-/*
- * hesiod_init --
- *	initialize a hesiod_p.
- */
-int 
-hesiod_init(context)
-	void	**context;
-{
-	struct hesiod_p	*ctx;
-	const char	*p, *configname;
-
-	ctx = malloc(sizeof(struct hesiod_p));
-	if (ctx) {
-		*context = ctx;
-		if (!issetugid())
-			configname = getenv("HESIOD_CONFIG");
-		else
-			configname = NULL;
-		if (!configname)
-			configname = _PATH_HESIOD_CONF;
-		if (read_config_file(ctx, configname) >= 0) {
-			/*
-			 * The default rhs can be overridden by an
-			 * environment variable.
-			 */
-			if (!issetugid())
-				p = getenv("HES_DOMAIN");
-			else
-				p = NULL;
-			if (p) {
-				if (ctx->rhs)
-					free(ctx->rhs);
-				ctx->rhs = malloc(strlen(p) + 2);
-				if (ctx->rhs) {
-					*ctx->rhs = '.';
-					strcpy(ctx->rhs + 1,
-					    (*p == '.') ? p + 1 : p);
-					return 0;
-				} else
-					errno = ENOMEM;
-			} else
-				return 0;
-		}
-	} else
-		errno = ENOMEM;
-
-	if (ctx->lhs)
-		free(ctx->lhs);
-	if (ctx->rhs)
-		free(ctx->rhs);
-	if (ctx)
-		free(ctx);
-	return -1;
-}
-
-/*
- * hesiod_end --
- *	Deallocates the hesiod_p.
- */
-void 
-hesiod_end(context)
-	void	*context;
-{
-	struct hesiod_p *ctx = (struct hesiod_p *) context;
-
-	free(ctx->rhs);
-	if (ctx->lhs)
-		free(ctx->lhs);
-	free(ctx);
-}
-
-/*
- * hesiod_to_bind --
- * 	takes a hesiod (name, type) and returns a DNS
- *	name which is to be resolved.
- */
-char *
-hesiod_to_bind(void *context, const char *name, const char *type)
-{
-	struct hesiod_p *ctx = (struct hesiod_p *) context;
-	char		 bindname[MAXDNAME], *p, *ret, **rhs_list = NULL;
-	const char	*rhs;
-	int		 len;
-	size_t		 bindnamelen;
-
-	if (strlcpy(bindname, name, sizeof(bindname)) >= sizeof(bindname)) {
-		errno = EMSGSIZE;
-		return NULL;
-	}
-
-		/*
-		 * Find the right right hand side to use, possibly
-		 * truncating bindname.
-		 */
-	p = strchr(bindname, '@');
-	if (p) {
-		*p++ = 0;
-		if (strchr(p, '.'))
-			rhs = name + (p - bindname);
-		else {
-			rhs_list = hesiod_resolve(context, p, "rhs-extension");
-			if (rhs_list)
-				rhs = *rhs_list;
-			else {
-				errno = ENOENT;
-				return NULL;
-			}
-		}
-	} else
-		rhs = ctx->rhs;
-
-		/* See if we have enough room. */
-	len = strlen(bindname) + 1 + strlen(type);
-	if (ctx->lhs)
-		len += strlen(ctx->lhs) + ((ctx->lhs[0] != '.') ? 1 : 0);
-	len += strlen(rhs) + ((rhs[0] != '.') ? 1 : 0);
-	if (len > sizeof(bindname) - 1) {
-		if (rhs_list)
-			hesiod_free_list(context, rhs_list);
-		errno = EMSGSIZE;
-		return NULL;
-	}
-		/* Put together the rest of the domain. */
-	strcat(bindname, ".");
-	strcat(bindname, type);
-		/* Only append lhs if it isn't empty. */
-	if (ctx->lhs && ctx->lhs[0] != '\0' ) {
-		if (ctx->lhs[0] != '.')
-			strcat(bindname, ".");
-		strcat(bindname, ctx->lhs);
-	}
-	if (rhs[0] != '.')
-		strcat(bindname, ".");
-	strcat(bindname, rhs);
-
-		/* rhs_list is no longer needed, since we're done with rhs. */
-	if (rhs_list)
-		hesiod_free_list(context, rhs_list);
-
-		/* Make a copy of the result and return it to the caller. */
-	bindnamelen = strlen (bindname) + 1;
-	ret = malloc (bindnamelen);
-	if (!ret)
-		errno = ENOMEM;
-	else
-		memcpy (ret, bindname, bindnamelen);
-	return ret;
-}
-
-/*
- * hesiod_resolve --
- *	Given a hesiod name and type, return an array of strings returned
- *	by the resolver.
- */
-char **
-hesiod_resolve(context, name, type)
-	void		*context;
-	const char	*name;
-	const char	*type;
-{
-	struct hesiod_p	*ctx = (struct hesiod_p *) context;
-	char		*bindname, **retvec;
-
-	bindname = hesiod_to_bind(context, name, type);
-	if (!bindname)
-		return NULL;
-
-	retvec = get_txt_records(ctx->classes[0], bindname);
-	if (retvec == NULL && errno == ENOENT && ctx->classes[1])
-		retvec = get_txt_records(ctx->classes[1], bindname);
-
-	free(bindname);
-	return retvec;
-}
-
-/*ARGSUSED*/
-void 
-hesiod_free_list(context, list)
-	void	 *context;
-	char	**list;
-{
-	char  **p;
-
-	if (list == NULL)
-		return;
-	for (p = list; *p; p++)
-		free(*p);
-	free(list);
-}
-
-
-/* read_config_file --
- *	Parse the /etc/hesiod.conf file.  Returns 0 on success,
- *	-1 on failure.  On failure, it might leave values in ctx->lhs
- *	or ctx->rhs which need to be freed by the caller.
- */
-static int 
-read_config_file(ctx, filename)
-	struct hesiod_p	*ctx;
-	const char	*filename;
-{
-	char	*key, *data, *p, **which;
-	char	 buf[MAXDNAME + 7];
-	int	 n;
-	FILE	*fp;
-
-		/* Set default query classes. */
-	ctx->classes[0] = C_IN;
-	ctx->classes[1] = C_HS;
-
-		/* Try to open the configuration file. */
-	fp = fopen(filename, "r");
-	if (!fp) {
-		size_t len;
-		/* Use compiled in default domain names. */
-		len = strlen (DEF_LHS) + 1;
-		ctx->lhs = malloc (len);
-		if (ctx->lhs) {
-			memcpy (ctx->lhs, DEF_LHS, len);
-			len = strlen (DEF_RHS) + 1;
-			ctx->rhs = malloc (len);
-			if (ctx->rhs)
-				memcpy (ctx->rhs, DEF_RHS, len);
-		}
-		if (ctx->lhs && ctx->rhs)
-			return 0;
-		else {
-			errno = ENOMEM;
-			return -1;
-		}
-	}
-	ctx->lhs = NULL;
-	ctx->rhs = NULL;
-	while (fgets(buf, sizeof(buf), fp) != NULL) {
-		p = buf;
-		if (*p == '#' || *p == '\n' || *p == '\r')
-			continue;
-		while (*p == ' ' || *p == '\t')
-			p++;
-		key = p;
-		while (*p != ' ' && *p != '\t' && *p != '=')
-			p++;
-		*p++ = 0;
-
-		while (isspace(*p) || *p == '=')
-			p++;
-		data = p;
-		while (!isspace(*p))
-			p++;
-		*p = 0;
-
-		if (strcasecmp(key, "lhs") == 0 ||
-		    strcasecmp(key, "rhs") == 0) {
-			size_t len;
-			which = (strcasecmp(key, "lhs") == 0)
-			    ? &ctx->lhs : &ctx->rhs;
-			len = strlen (data) + 1;
-			*which = malloc (len);
-			if (!*which) {
-				errno = ENOMEM;
-				return -1;
-			}
-			else
-				memcpy (*which, data, len);
-		} else {
-			if (strcasecmp(key, "classes") == 0) {
-				n = 0;
-				while (*data && n < 2) {
-					p = data;
-					while (*p && *p != ',')
-						p++;
-					if (*p)
-						*p++ = 0;
-					if (strcasecmp(data, "IN") == 0)
-						ctx->classes[n++] = C_IN;
-					else
-						if (strcasecmp(data, "HS") == 0)
-							ctx->classes[n++] =
-							    C_HS;
-					data = p;
-				}
-				while (n < 2)
-					ctx->classes[n++] = 0;
-			}
-		}
-	}
-	fclose(fp);
-
-	if (!ctx->rhs || ctx->classes[0] == 0 ||
-	    ctx->classes[0] == ctx->classes[1]) {
-		errno = ENOEXEC;
-		return -1;
-	}
-	return 0;
-}
-
-/*
- * get_txt_records --
- *	Given a DNS class and a DNS name, do a lookup for TXT records, and
- *	return a list of them.
- */
-static char **
-get_txt_records(qclass, name)
-	int		 qclass;
-	const char	*name;
-{
-	HEADER		*hp;
-	unsigned char	 qbuf[PACKETSZ], abuf[MAX_HESRESP], *p, *eom, *eor;
-	char		*dst, **list;
-	int		 ancount, qdcount, i, j, n, skip, type, class, len;
-
-		/* Make sure the resolver is initialized. */
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1)
-		return NULL;
-
-		/* Construct the query. */
-	n = res_mkquery(QUERY, name, qclass, T_TXT, NULL, 0,
-	    NULL, qbuf, PACKETSZ);
-	if (n < 0)
-		return NULL;
-
-		/* Send the query. */
-	n = res_send(qbuf, n, abuf, MAX_HESRESP);
-	if (n < 0) {
-		errno = ECONNREFUSED;
-		return NULL;
-	}
-		/* Parse the header of the result. */
-	hp = (HEADER *) (void *) abuf;
-	ancount = ntohs(hp->ancount);
-	qdcount = ntohs(hp->qdcount);
-	p = abuf + sizeof(HEADER);
-	eom = abuf + n;
-
-		/*
-		 * Skip questions, trying to get to the answer section
-		 * which follows.
-		 */
-	for (i = 0; i < qdcount; i++) {
-		skip = dn_skipname(p, eom);
-		if (skip < 0 || p + skip + QFIXEDSZ > eom) {
-			errno = EMSGSIZE;
-			return NULL;
-		}
-		p += skip + QFIXEDSZ;
-	}
-
-		/* Allocate space for the text record answers. */
-	list = malloc((ancount + 1) * sizeof(char *));
-	if (!list) {
-		errno = ENOMEM;
-		return NULL;
-	}
-		/* Parse the answers. */
-	j = 0;
-	for (i = 0; i < ancount; i++) {
-		/* Parse the header of this answer. */
-		skip = dn_skipname(p, eom);
-		if (skip < 0 || p + skip + 10 > eom)
-			break;
-		type = p[skip + 0] << 8 | p[skip + 1];
-		class = p[skip + 2] << 8 | p[skip + 3];
-		len = p[skip + 8] << 8 | p[skip + 9];
-		p += skip + 10;
-		if (p + len > eom) {
-			errno = EMSGSIZE;
-			break;
-		}
-		/* Skip entries of the wrong class and type. */
-		if (class != qclass || type != T_TXT) {
-			p += len;
-			continue;
-		}
-		/* Allocate space for this answer. */
-		list[j] = malloc((size_t)len);
-		if (!list[j]) {
-			errno = ENOMEM;
-			break;
-		}
-		dst = list[j++];
-
-		/* Copy answer data into the allocated area. */
-		eor = p + len;
-		while (p < eor) {
-			n = (unsigned char) *p++;
-			if (p + n > eor) {
-				errno = EMSGSIZE;
-				break;
-			}
-			memcpy(dst, p, (size_t)n);
-			p += n;
-			dst += n;
-		}
-		if (p < eor) {
-			errno = EMSGSIZE;
-			break;
-		}
-		*dst = 0;
-	}
-
-		/*
-		 * If we didn't terminate the loop normally, something
-		 * went wrong.
-		 */
-	if (i < ancount) {
-		for (i = 0; i < j; i++)
-			free(list[i]);
-		free(list);
-		return NULL;
-	}
-	if (j == 0) {
-		errno = ENOENT;
-		free(list);
-		return NULL;
-	}
-	list[j] = NULL;
-	return list;
-}
-
-		/*
-		 *	COMPATIBILITY FUNCTIONS
-		 */
-
-static int	  inited = 0;
-static void	 *context;
-static int	  errval = HES_ER_UNINIT;
-
-int
-hes_init()
-{
-	init_context();
-	return errval;
-}
-
-char *
-hes_to_bind(name, type)
-	const char	*name;
-	const char	*type;
-{
-	static	char	*bindname;
-	if (init_context() < 0)
-		return NULL;
-	if (bindname)
-		free(bindname);
-	bindname = hesiod_to_bind(context, name, type);
-	if (!bindname)
-		translate_errors();
-	return bindname;
-}
-
-char **
-hes_resolve(name, type)
-	const char	*name;
-	const char	*type;
-{
-	static char	**list;
-
-	if (init_context() < 0)
-		return NULL;
-
-	/*
-	 * In the old Hesiod interface, the caller was responsible for
-	 * freeing the returned strings but not the vector of strings itself.
-	 */
-	if (list)
-		free(list);
-
-	list = hesiod_resolve(context, name, type);
-	if (!list)
-		translate_errors();
-	return list;
-}
-
-int
-hes_error()
-{
-	return errval;
-}
-
-void
-hes_free(hp)
-	char **hp;
-{
-	hesiod_free_list(context, hp);
-}
-
-static int
-init_context()
-{
-	if (!inited) {
-		inited = 1;
-		if (hesiod_init(&context) < 0) {
-			errval = HES_ER_CONFIG;
-			return -1;
-		}
-		errval = HES_ER_OK;
-	}
-	return 0;
-}
-
-static void
-translate_errors()
-{
-	switch (errno) {
-	case ENOENT:
-		errval = HES_ER_NOTFOUND;
-		break;
-	case ECONNREFUSED:
-	case EMSGSIZE:
-		errval = HES_ER_NET;
-		break;
-	case ENOMEM:
-	default:
-		/* Not a good match, but the best we can do. */
-		errval = HES_ER_CONFIG;
-		break;
-	}
-}
diff --git a/newlib/libc/sys/linux/net/if_indextoname.3 b/newlib/libc/sys/linux/net/if_indextoname.3
deleted file mode 100644
index 4b5bff5aa..000000000
--- a/newlib/libc/sys/linux/net/if_indextoname.3
+++ /dev/null
@@ -1,142 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)rcmd.3	8.1 (Berkeley) 6/4/93
-.\"	$FreeBSD: src/lib/libc/net/if_indextoname.3,v 1.7 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd May 21, 1998
-.Dt IF_NAMETOINDEX 3
-.Os
-.Sh NAME
-.Nm if_nametoindex ,
-.Nm if_indextoname ,
-.Nm if_nameindex ,
-.Nm if_freenameindex
-.Nd convert interface index to name, and vice versa
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In net/if.h
-.Ft "unsigned int"
-.Fn if_nametoindex "const char *ifname"
-.Ft "char *"
-.Fn if_indextoname "unsigned int ifindex" "char *ifname"
-.Ft "struct if_nameindex *"
-.Fn if_nameindex "void"
-.Ft "void"
-.Fn if_freenameindex "struct if_nameindex *ptr"
-.Sh DESCRIPTION
-The functions map interface index to readable interface name
-(such as
-.Dq Li lo0 ) ,
-and vice versa.
-.Pp
-.Fn if_nametoindex
-converts readable interface name to interface index
-.Pp positive integer value .
-If the specified interface does not exist, 0 will be returned.
-.Pp
-.Fn if_indextoname
-converts interface index to readable interface name.
-The
-.Fa ifname
-argument must point to a buffer of at least
-.Dv IF_NAMESIZE
-bytes into which the interface name corresponding to the specified index is
-returned.
-.Dv ( IF_NAMESIZE
-is also defined in
-.Aq Pa net/if.h
-and its value includes a terminating null byte at the end of the
-interface name.)
-This pointer is also the return value of the function.
-If there is no interface corresponding to the specified index,
-.Dv NULL
-is returned.
-.Pp
-.Fn if_nameindex
-returns an array of
-.Fa if_nameindex
-structures.
-.Fa if_nametoindex
-is also defined in
-.Aq Pa net/if.h ,
-and is as follows:
-.Bd -literal -offset
-struct if_nameindex {
-    unsigned int   if_index;  /* 1, 2, ... */
-    char          *if_name;   /* null terminated name: "le0", ... */
-};
-.Ed
-.Pp
-The end of the array of structures is indicated by a structure with
-an
-.Fa if_index
-of 0 and an
-.Fa if_name
-of
-.Dv NULL .
-The function returns a
-.Dv NULL
-pointer upon an error.
-The memory used for this array of structures along with the interface
-names pointed to by the
-.Fa if_name
-members is obtained dynamically.
-This memory is freed by the
-.Fn if_freenameindex
-function.
-.Pp
-.Fn if_freenameindex
-takes a pointer that was returned by
-.Fn if_nameindex
-as argument
-.Pq Fa ptr ,
-and it reclaims the region allocated.
-.Sh DIAGNOSTICS
-.Fn if_nametoindex
-returns 0 on error, positive integer on success.
-.Fn if_indextoname
-and
-.Fn if_nameindex
-return
-.Dv NULL
-on errors.
-.Sh SEE ALSO
-R. Gilligan, S.  Thomson, J. Bound, and W. Stevens,
-``Basic Socket Interface Extensions for IPv6,'' RFC2553, March 1999.
-.Sh HISTORY
-The implementation first appeared in WIDE Hydrangea IPv6 protocol stack kit.
-.Sh STANDARDS
-These functions are defined in ``Basic Socket Interface Extensions for IPv6''
-(RFC2533).
diff --git a/newlib/libc/sys/linux/net/ifname.c b/newlib/libc/sys/linux/net/ifname.c
deleted file mode 100644
index b7975bc2b..000000000
--- a/newlib/libc/sys/linux/net/ifname.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*	$KAME: ifname.c,v 1.4 2001/08/20 02:32:40 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <sys/types.h>
-
-/*
- * TODO:
- * - prototype defs into arpa/inet.h, not net/if.h (bsd-api-new-02)
- */
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/sysctl.h>
-#include <net/if.h>
-#include <net/route.h>
-#include <net/if_dl.h>
-
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-
-#define ROUNDUP(a) \
-	((a) > 0 ? (1 + (((a) - 1) | (sizeof(long) - 1))) : sizeof(long))
-#define ADVANCE(x, n)
-
-static unsigned int
-if_onametoindex(ifname)
-	const char *ifname;
-{
-	struct if_nameindex *iff = if_nameindex(), *ifx;
-	int ret;
-
-	if (iff == NULL) return 0;
-	ifx = iff;
-	while (ifx->if_name != NULL) {
-		if (strcmp(ifx->if_name, ifname) == 0) {
-			ret = ifx->if_index;
-			if_freenameindex(iff);
-			return ret;
-		}
-		ifx++;
-	}
-	if_freenameindex(iff);
-	errno = ENXIO;
-	return 0;
-}
- 
-unsigned int
-if_nametoindex(ifname)
-	const char *ifname;
-{
-	int s;
-	struct ifreq ifr;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s == -1)
-		return (0);
-	strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-	if (ioctl(s, SIOCGIFINDEX, &ifr) == -1) {
-		close (s);
-		return (if_onametoindex(ifname));
-	}
-	close(s);
-	return (ifr.ifr_index);
-}
-
-char *
-if_indextoname(ifindex, ifname)
-	unsigned int ifindex;
-	char *ifname; /* at least IF_NAMESIZE */
-{
-	struct if_nameindex *iff = if_nameindex(), *ifx;
-	char *cp, *dp;
-
-	if (iff == NULL) return NULL;
-	ifx = iff;
-	while (ifx->if_index != 0) {
-		if (ifx->if_index == ifindex) {
-			cp = ifname;
-			dp = ifx->if_name;
-			while ((*cp++ = *dp++)) ;
-			if_freenameindex(iff);
-			return (ifname);
-		}
-		ifx++;
-	}
-	if_freenameindex(iff);
-	errno = ENXIO;
-	return NULL;
-}
-
-struct if_nameindex *
-if_nameindex()
-{
-	size_t needed;
-	int mib[6], i, ifn = 0, off = 0, hlen;
-	char *buf = NULL, *lim, *next, *cp, *ifbuf = NULL;
-	struct rt_msghdr *rtm;
-	struct if_msghdr *ifm;
-	struct sockaddr *sa;
-	struct if_nameindex *ret = NULL;
-	static int ifxs = 64;	/* initial upper limit */
-	struct _ifx {
-		int if_index;
-		int if_off;
-	} *ifx = NULL;
-
-	mib[0] = CTL_NET;
-	mib[1] = PF_ROUTE;
-	mib[2] = 0;		/* protocol */
-	mib[3] = 0;		/* wildcard address family */
-	mib[4] = 0;
-	mib[5] = 0;		/* no flags */
-	if (__sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
-		return NULL;
-	if ((buf = malloc(needed)) == NULL) {
-		errno = ENOMEM;
-		goto end;
-	}
-	/* XXX: we may have allocated too much than necessary */
-	if ((ifbuf = malloc(needed)) == NULL) {
-		errno = ENOMEM;
-		goto end;
-	}
-	if ((ifx = (struct _ifx *)malloc(sizeof(*ifx) * ifxs)) == NULL) {
-		errno = ENOMEM;
-		goto end;
-	}
-	if (__sysctl(mib, 6, buf, &needed, NULL, 0) < 0) {
-		/* sysctl has set errno */
-		goto end;
-	}
-	lim = buf + needed;
-	for (next = buf; next < lim; next += rtm->rtm_msglen) {
-		rtm = (struct rt_msghdr *)next;
-		if (rtm->rtm_version != RTM_VERSION) {
-			errno = EPROTONOSUPPORT;
-			goto end;
-		}
-		switch (rtm->rtm_type) {
-		case RTM_IFINFO:
-			ifm = (struct if_msghdr *)rtm;
-			ifx[ifn].if_index = ifm->ifm_index;
-			ifx[ifn].if_off = off;
-			cp = (char *)(ifm + 1);
-			for (i = 1; i; i <<= 1) {
-				if (i & ifm->ifm_addrs) {
-					sa = (struct sockaddr *)cp;
-					ADVANCE(cp, sa);
-				}
-			}
-			if (++ifn == ifxs) {
-				/* we need more memory */
-				struct _ifx *newifx;
-
-				ifxs *= 2;
-				if ((newifx = (struct _ifx *)malloc(sizeof(*newifx) * ifxs)) == NULL) {
-					errno = ENOMEM;
-					goto end;
-				}
-
-				/* copy and free old data */
-				memcpy(newifx, ifx, (sizeof(*ifx) * ifxs) / 2);
-				free(ifx);
-				ifx = newifx;
-			}
-		}
-	}
-	hlen = sizeof(struct if_nameindex) * (ifn + 1);
-	if ((cp = (char *)malloc(hlen + off)) == NULL) {
-		errno = ENOMEM;
-		goto end;
-	}
-	bcopy(ifbuf, cp + hlen, off);
-	ret = (struct if_nameindex *)cp;
-	for (i = 0; i < ifn; i++) {
-		ret[i].if_index = ifx[i].if_index;
-		ret[i].if_name = cp + hlen + ifx[i].if_off;
-	}
-	ret[ifn].if_index = 0;
-	ret[ifn].if_name = NULL;
-
-  end:
-	if (buf) free(buf);
-	if (ifbuf) free(ifbuf);
-	if (ifx) free(ifx);
-
-	return ret;
-}
-
-void if_freenameindex(ptr)
-	struct if_nameindex *ptr;
-{
-	free(ptr);
-}
diff --git a/newlib/libc/sys/linux/net/inet.3 b/newlib/libc/sys/linux/net/inet.3
deleted file mode 100644
index 7a6fcf370..000000000
--- a/newlib/libc/sys/linux/net/inet.3
+++ /dev/null
@@ -1,271 +0,0 @@
-.\" Copyright (c) 1983, 1990, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)inet.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/inet.3,v 1.22 2001/12/01 03:43:01 mike Exp $
-.\"
-.Dd June 17, 1996
-.Dt INET 3
-.Os
-.Sh NAME
-.Nm inet_aton ,
-.Nm inet_addr ,
-.Nm inet_network ,
-.Nm inet_ntoa ,
-.Nm inet_ntop ,
-.Nm inet_pton ,
-.Nm inet_makeaddr ,
-.Nm inet_lnaof ,
-.Nm inet_netof
-.Nd Internet address manipulation routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In netinet/in.h
-.In arpa/inet.h
-.Ft int
-.Fn inet_aton "const char *cp" "struct in_addr *pin"
-.Ft in_addr_t
-.Fn inet_addr "const char *cp"
-.Ft in_addr_t
-.Fn inet_network "const char *cp"
-.Ft char *
-.Fn inet_ntoa "struct in_addr in"
-.Ft const char *
-.Fn inet_ntop "int af" "const void *src" "char *dst" "socklen_t size"
-.Ft int
-.Fn inet_pton "int af" "const char *src" "void *dst"
-.Ft struct in_addr
-.Fn inet_makeaddr "in_addr_t net" "in_addr_t lna"
-.Ft in_addr_t
-.Fn inet_lnaof "struct in_addr in"
-.Ft in_addr_t
-.Fn inet_netof "struct in_addr in"
-.Sh DESCRIPTION
-The routines
-.Fn inet_aton ,
-.Fn inet_addr
-and
-.Fn inet_network
-interpret character strings representing
-numbers expressed in the Internet standard
-.Ql .\&
-notation.
-.Pp
-The
-.Fn inet_pton
-function converts a presentation format address (that is, printable form
-as held in a character string) to network format (usually a
-.Ft struct in_addr
-or some other internal binary representation, in network byte order).
-It returns 1 if the address was valid for the specified address family, or
-0 if the address wasn't parseable in the specified address family, or -1
-if some system error occurred (in which case
-.Va errno
-will have been set).
-This function is presently valid for
-.Dv AF_INET
-and
-.Dv AF_INET6 .
-.Pp
-The
-.Fn inet_aton
-routine interprets the specified character string as an Internet address,
-placing the address into the structure provided.
-It returns 1 if the string was successfully interpreted,
-or 0 if the string is invalid.
-The
-.Fn inet_addr
-and
-.Fn inet_network
-functions return numbers suitable for use
-as Internet addresses and Internet network
-numbers, respectively.
-.Pp
-The function
-.Fn inet_ntop
-converts an address from network format (usually a
-.Ft struct in_addr
-or some other binary form, in network byte order) to presentation format
-(suitable for external display purposes).
-It returns NULL if a system error occurs (in which case,
-.Va errno
-will have been set), or it returns a pointer to the destination string.
-This function is presently valid for
-.Dv AF_INET
-and
-.Dv AF_INET6 .
-.Pp
-The routine
-.Fn inet_ntoa
-takes an Internet address and returns an
-.Tn ASCII
-string representing the address in
-.Ql .\&
-notation.  The routine
-.Fn inet_makeaddr
-takes an Internet network number and a local
-network address and constructs an Internet address
-from it.  The routines
-.Fn inet_netof
-and
-.Fn inet_lnaof
-break apart Internet host addresses, returning
-the network number and local network address part,
-respectively.
-.Pp
-All Internet addresses are returned in network
-order (bytes ordered from left to right).
-All network numbers and local address parts are
-returned as machine byte order integer values.
-.Sh INTERNET ADDRESSES
-Values specified using the
-.Ql .\&
-notation take one
-of the following forms:
-.Bd -literal -offset indent
-a.b.c.d
-a.b.c
-a.b
-a
-.Ed
-.Pp
-When four parts are specified, each is interpreted
-as a byte of data and assigned, from left to right,
-to the four bytes of an Internet address.  Note
-that when an Internet address is viewed as a 32-bit
-integer quantity on the
-.Tn VAX
-the bytes referred to
-above appear as
-.Dq Li d.c.b.a .
-That is,
-.Tn VAX
-bytes are
-ordered from right to left.
-.Pp
-When a three part address is specified, the last
-part is interpreted as a 16-bit quantity and placed
-in the right-most two bytes of the network address.
-This makes the three part address format convenient
-for specifying Class B network addresses as
-.Dq Li 128.net.host .
-.Pp
-When a two part address is supplied, the last part
-is interpreted as a 24-bit quantity and placed in
-the right most three bytes of the network address.
-This makes the two part address format convenient
-for specifying Class A network addresses as
-.Dq Li net.host .
-.Pp
-When only one part is given, the value is stored
-directly in the network address without any byte
-rearrangement.
-.Pp
-All numbers supplied as
-.Dq parts
-in a
-.Ql .\&
-notation
-may be decimal, octal, or hexadecimal, as specified
-in the C language (i.e., a leading 0x or 0X implies
-hexadecimal; otherwise, a leading 0 implies octal;
-otherwise, the number is interpreted as decimal).
-.Pp
-The
-.Fn inet_aton
-and
-.Fn inet_ntoa
-functions are semi-deprecated in favor of the
-.Xr addr2ascii 3
-family.  However, since those functions are not yet widely implemented,
-portable programs cannot rely on their presence and will continue
-to use the
-.Xr inet 3
-functions for some time.
-.Sh DIAGNOSTICS
-The constant
-.Dv INADDR_NONE
-is returned by
-.Fn inet_addr
-and
-.Fn inet_network
-for malformed requests.
-.Sh SEE ALSO
-.Xr addr2ascii 3 ,
-.Xr byteorder 3 ,
-.Xr gethostbyname 3 ,
-.Xr getnetent 3 ,
-.Xr inet_net 3 ,
-.Xr hosts 5 ,
-.Xr networks 5
-.Rs
-.%R RFC
-.%N 2373
-.%D July 1998
-.%T "IP Version 6 Addressing Architecture"
-.Re
-.Sh STANDARDS
-The
-.Fn inet_ntop
-and
-.Fn inet_pton
-functions conform to
-.St -xns5.2 .
-Note that
-.Fn inet_pton
-does not accept 1-, 2-, or 3-part dotted addresses; all four parts
-must be specified and are interpreted only as decimal values.
-This is a narrower input set than that accepted by
-.Fn inet_aton .
-.Sh HISTORY
-These
-functions appeared in
-.Bx 4.2 .
-.Sh BUGS
-The value
-.Dv INADDR_NONE
-(0xffffffff) is a valid broadcast address, but
-.Fn inet_addr
-cannot return that value without indicating failure.
-The newer
-.Fn inet_aton
-function does not share this problem.
-The problem of host byte ordering versus network byte ordering is
-confusing.
-The string returned by
-.Fn inet_ntoa
-resides in a static memory area.
-.Pp
-Inet_addr should return a
-.Fa struct in_addr .
diff --git a/newlib/libc/sys/linux/net/inet6_option_space.3 b/newlib/libc/sys/linux/net/inet6_option_space.3
deleted file mode 100644
index 328c70f48..000000000
--- a/newlib/libc/sys/linux/net/inet6_option_space.3
+++ /dev/null
@@ -1,445 +0,0 @@
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     $Id$
-.\" $FreeBSD: src/lib/libc/net/inet6_option_space.3,v 1.8 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd December 10, 1999
-.Dt INET6_OPTION_SPACE 3
-.Os
-.\"
-.Sh NAME
-.Nm inet6_option_space ,
-.Nm inet6_option_init ,
-.Nm inet6_option_append ,
-.Nm inet6_option_alloc ,
-.Nm inet6_option_next ,
-.Nm inet6_option_find
-.Nd IPv6 Hop-by-Hop and Destination Options manipulation
-.\"
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netinet/in.h
-.Ft "int"
-.Fn inet6_option_space "int nbytes"
-.Ft "int"
-.Fn inet6_option_init "void *bp" "struct cmsghdr **cmsgp" "int type"
-.Ft "int"
-.Fn inet6_option_append "struct cmsghdr *cmsg" "const u_int8_t *typep" "int multx" "int plusy"
-.Ft "u_int8_t *"
-.Fn inet6_option_alloc "struct cmsghdr *cmsg" "int datalen" "int multx" "int plusy"
-.Ft "int"
-.Fn inet6_option_next "const struct cmsghdr *cmsg" "u_int8_t **tptrp"
-.Ft "int"
-.Fn inet6_option_find "const struct cmsghdr *cmsg" "u_int8_t **tptrp" "int type"
-.\"
-.Sh DESCRIPTION
-.\"
-Building and parsing the Hop-by-Hop and Destination options is
-complicated due to alignment constranints, padding and
-ancillary data manipulation.
-RFC2292 defines a set of functions to help the application.
-The function prototypes for
-these functions are all in the
-.Aq Li netinet/in.h
-header.
-.\"
-.Ss inet6_option_space
-.Fn inet6_option_space
-returns the number of bytes required to hold an option when it is stored as
-ancillary data, including the
-.Li cmsghdr
-structure at the beginning,
-and any padding at the end
-(to make its size a multiple of 8 bytes).
-The argument is the size of the structure defining the option,
-which must include any pad bytes at the beginning
-(the value
-.Li y
-in the alignment term
-.Dq Li "xn + y" ) ,
-the type byte, the length byte, and the option data.
-.Pp
-Note: If multiple options are stored in a single ancillary data
-object, which is the recommended technique, this function
-overestimates the amount of space required by the size of
-.Li N-1
-.Li cmsghdr
-structures,
-where
-.Li N
-is the number of options to be stored in the object.
-This is of little consequence, since it is assumed that most
-Hop-by-Hop option headers and Destination option headers carry only
-one option
-(appendix B of [RFC-2460]).
-.\"
-.Ss inet6_option_init
-.Fn inet6_option_init
-is called once per ancillary data object that will
-contain either Hop-by-Hop or Destination options.
-It returns
-.Li 0
-on success or
-.Li -1
-on an error.
-.Pp
-.Fa bp
-is a pointer to previously allocated space that will contain the
-ancillary data object.
-It must be large enough to contain all the
-individual options to be added by later calls to
-.Fn inet6_option_append
-and
-.Fn inet6_option_alloc .
-.Pp
-.Fa cmsgp
-is a pointer to a pointer to a
-.Li cmsghdr
-structure.
-.Fa *cmsgp
-is initialized by this function to point to the
-.Li cmsghdr
-structure constructed by this function in the buffer pointed to by
-.Fa bp .
-.Pp
-.Fa type
-is either
-.Dv IPV6_HOPOPTS
-or
-.Dv IPV6_DSTOPTS .
-This
-.Fa type
-is stored in the
-.Li cmsg_type
-member of the
-.Li cmsghdr
-structure pointed to by
-.Fa *cmsgp .
-.\"
-.Ss inet6_option_append
-This function appends a Hop-by-Hop option or a Destination option
-into an ancillary data object that has been initialized by
-.Fn inet6_option_init .
-This function returns
-.Li 0
-if it succeeds or
-.Li -1
-on an error.
-.Pp
-.Fa cmsg
-is a pointer to the
-.Li cmsghdr
-structure that must have been
-initialized by
-.Fn inet6_option_init .
-.Pp
-.Fa typep
-is a pointer to the 8-bit option type.
-It is assumed that this
-field is immediately followed by the 8-bit option data length field,
-which is then followed immediately by the option data.
-The caller
-initializes these three fields
-(the type-length-value, or TLV)
-before calling this function.
-.Pp
-The option type must have a value from
-.Li 2
-to
-.Li 255 ,
-inclusive.
-.Li ( 0
-and
-.Li 1
-are reserved for the
-.Li Pad1
-and
-.Li PadN
-options, respectively.)
-.Pp
-The option data length must have a value between
-.Li 0
-and
-.Li 255 ,
-inclusive, and is the length of the option data that follows.
-.Pp
-.Fa multx
-is the value
-.Li x
-in the alignment term
-.Dq Li xn + y .
-It must have a value of
-.Li 1 ,
-.Li 2 ,
-.Li 4 ,
-or
-.Li 8 .
-.Pp
-.Fa plusy
-is the value
-.Li y
-in the alignment term
-.Dq Li xn + y .
-It must have a value between
-.Li 0
-and
-.Li 7 ,
-inclusive.
-.\"
-.Ss inet6_option_alloc
-This function appends a Hop-by-Hop option or a Destination option
-into an ancillary data object that has been initialized by
-.Fn inet6_option_init .
-This function returns a pointer to the 8-bit
-option type field that starts the option on success, or
-.Dv NULL
-on an error.
-.Pp
-The difference between this function and
-.Fn inet6_option_append
-is that the latter copies the contents of a previously built option into
-the ancillary data object while the current function returns a
-pointer to the space in the data object where the option's TLV must
-then be built by the caller.
-.Pp
-.Fa cmsg
-is a pointer to the
-.Li cmsghdr
-structure that must have been
-initialized by
-.Fn inet6_option_init .
-.Pp
-.Fa datalen
-is the value of the option data length byte for this option.
-This value is required as an argument to allow the function to
-determine if padding must be appended at the end of the option.
-(The
-.Fn inet6_option_append
-function does not need a data length argument
-since the option data length must already be stored by the caller.)
-.Pp
-.Fa multx
-is the value
-.Li x
-in the alignment term
-.Dq Li xn + y .
-It must have a value of
-.Li 1 ,
-.Li 2 ,
-.Li 4 ,
-or
-.Li 8 .
-.Pp
-.Fa plusy
-is the value
-.Li y
-in the alignment term
-.Dq Li xn + y .
-It must have a value between
-.Li 0
-and
-.Li 7 ,
-inclusive.
-.\"
-.Ss inet6_option_next
-This function processes the next Hop-by-Hop option or Destination
-option in an ancillary data object.
-If another option remains to be
-processed, the return value of the function is
-.Li 0
-and
-.Fa *tptrp
-points to
-the 8-bit option type field
-(which is followed by the 8-bit option
-data length, followed by the option data).
-If no more options remain
-to be processed, the return value is
-.Li -1
-and
-.Fa *tptrp
-is
-.Dv NULL .
-If an error occurs, the return value is
-.Li -1
-and
-.Fa *tptrp
-is not
-.Dv NULL .
-.Pp
-.Fa cmsg
-is a pointer to
-.Li cmsghdr
-structure of which
-.Li cmsg_level
-equals
-.Dv IPPROTO_IPV6
-and
-.Li cmsg_type
-equals either
-.Dv IPV6_HOPOPTS
-or
-.Dv IPV6_DSTOPTS .
-.Pp
-.Fa tptrp
-is a pointer to a pointer to an 8-bit byte and
-.Fa *tptrp
-is used
-by the function to remember its place in the ancillary data object
-each time the function is called.
-The first time this function is
-called for a given ancillary data object,
-.Fa *tptrp
-must be set to
-.Dv NULL .
-.Pp
-Each time this function returns success,
-.Fa *tptrp
-points to the 8-bit
-option type field for the next option to be processed.
-.\"
-.Ss inet6_option_find
-This function is similar to the previously described
-.Fn inet6_option_next
-function, except this function lets the caller
-specify the option type to be searched for, instead of always
-returning the next option in the ancillary data object.
-.Fa cmsg
-is a
-pointer to
-.Li cmsghdr
-structure of which
-.Li cmsg_level
-equals
-.Dv IPPROTO_IPV6
-and
-.Li cmsg_type
-equals either
-.Dv IPV6_HOPOPTS
-or
-.Dv IPV6_DSTOPTS .
-.Pp
-.Fa tptrp
-is a pointer to a pointer to an 8-bit byte and
-.Fa *tptrp
-is used
-by the function to remember its place in the ancillary data object
-each time the function is called.
-The first time this function is
-called for a given ancillary data object,
-.Fa *tptrp
-must be set to
-.Dv NULL .
-.Pa
-This function starts searching for an option of the specified type
-beginning after the value of
-.Fa *tptrp .
-If an option of the specified
-type is located, this function returns
-.Li 0
-and
-.Fa *tptrp
-points to the 8-
-bit option type field for the option of the specified type.
-If an
-option of the specified type is not located, the return value is
-.Li -1
-and
-.Fa *tptrp
-is
-.Dv NULL .
-If an error occurs, the return value is
-.Li -1
-and
-.Fa *tptrp
-is not
-.Dv NULL .
-.\"
-.Sh DIAGNOSTICS
-.Fn inet6_option_init
-and
-.Fn inet6_option_append
-return
-.Li 0
-on success or
-.Li -1
-on an error.
-.Pp
-.Fn inet6_option_alloc
-returns
-.Dv NULL
-on an error.
-.Pp
-On errors,
-.Fn inet6_option_next
-and
-.Fn inet6_option_find
-return
-.Li -1
-setting
-.Fa *tptrp
-to non
-.Dv NULL
-value.
-.\"
-.Sh EXAMPLES
-RFC2292 gives comprehensive examples in chapter 6.
-.\"
-.Sh SEE ALSO
-.Rs
-.%A W. Stevens
-.%A M. Thomas
-.%T "Advanced Sockets API for IPv6"
-.%N RFC2292
-.%D February 1998
-.Re
-.Rs
-.%A S. Deering
-.%A R. Hinden
-.%T "Internet Protocol, Version 6 (IPv6) Specification"
-.%N RFC2460
-.%D December 1998
-.Re
-.\"
-.Sh HISTORY
-The implementation first appeared in KAME advanced networking kit.
-.\"
-.Sh STANDARDS
-The functions
-are documented in
-.Dq Advanced Sockets API for IPv6
-(RFC2292).
-.\"
-.Sh BUGS
-The text was shamelessly copied from RFC2292.
diff --git a/newlib/libc/sys/linux/net/inet6_rthdr_space.3 b/newlib/libc/sys/linux/net/inet6_rthdr_space.3
deleted file mode 100644
index d2c575dca..000000000
--- a/newlib/libc/sys/linux/net/inet6_rthdr_space.3
+++ /dev/null
@@ -1,323 +0,0 @@
-.\" Copyright (c) 1983, 1987, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     $Id$
-.\" $FreeBSD: src/lib/libc/net/inet6_rthdr_space.3,v 1.8 2001/10/01 16:08:55 ru Exp $
-.\"
-.Dd December 10, 1999
-.Dt INET6_RTHDR_SPACE 3
-.Os
-.\"
-.Sh NAME
-.Nm inet6_rthdr_space ,
-.Nm inet6_rthdr_init ,
-.Nm inet6_rthdr_add ,
-.Nm inet6_rthdr_lasthop ,
-.Nm inet6_rthdr_reverse ,
-.Nm inet6_rthdr_segments ,
-.Nm inet6_rthdr_getaddr ,
-.Nm inet6_rthdr_getflags
-.Nd IPv6 Routing Header Options manipulation
-.\"
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netinet/in.h
-.Ft size_t
-.Fn inet6_rthdr_space "int type" "int segments"
-.Ft "struct cmsghdr *"
-.Fn inet6_rthdr_init "void *bp" "int type"
-.Ft int
-.Fn inet6_rthdr_add "struct cmsghdr *cmsg" "const struct in6_addr *addr" "unsigned int flags"
-.Ft int
-.Fn inet6_rthdr_lasthop "struct cmsghdr *cmsg" "unsigned int flags"
-.Ft int
-.Fn inet6_rthdr_reverse "const struct cmsghdr *in" "struct cmsghdr *out"
-.Ft int
-.Fn inet6_rthdr_segments "const struct cmsghdr *cmsg"
-.Ft "struct in6_addr *"
-.Fn inet6_rthdr_getaddr "struct cmsghdr *cmsg" "int index"
-.Ft int
-.Fn inet6_rthdr_getflags "const struct cmsghdr *cmsg" "int index"
-.\"
-.Sh DESCRIPTION
-RFC2292 IPv6 advanced API defines eight
-functions that the application calls to build and examine a Routing
-header.  Four functions build a Routing header:
-.Bl -hang
-.It Fn inet6_rthdr_space
-return #bytes required for ancillary data
-.It Fn inet6_rthdr_init
-initialize ancillary data for Routing header
-.It Fn inet6_rthdr_add
-add IPv6 address & flags to Routing header
-.It Fn inet6_rthdr_lasthop
-specify the flags for the final hop
-.El
-.Pp
-Four functions deal with a returned Routing header:
-.Bl -hang
-.It Fn inet6_rthdr_reverse
-reverse a Routing header
-.It Fn inet6_rthdr_segments
-return #segments in a Routing header
-.It Fn inet6_rthdr_getaddr
-fetch one address from a Routing header
-.It Fn inet6_rthdr_getflags
-fetch one flag from a Routing header
-.El
-.Pp
-The function prototypes for these functions are all in the
-.Aq Li netinet/in.h
-header.
-.\"
-.Ss inet6_rthdr_space
-This function returns the number of bytes required to hold a Routing
-header of the specified
-.Fa type
-containing the specified number of
-.Fa segments
-(addresses).
-For an IPv6 Type 0 Routing header, the number
-of segments must be between 1 and 23, inclusive.  The return value
-includes the size of the cmsghdr structure that precedes the Routing
-header, and any required padding.
-.Pp
-If the return value is 0, then either the type of the Routing header
-is not supported by this implementation or the number of segments is
-invalid for this type of Routing header.
-.Pp
-Note: This function returns the size but does not allocate the space
-required for the ancillary data.
-This allows an application to
-allocate a larger buffer, if other ancillary data objects are
-desired, since all the ancillary data objects must be specified to
-.Xr sendmsg 2
-as a single
-.Li msg_control
-buffer.
-.\"
-.Ss inet6_rthdr_init
-This function initializes the buffer pointed to by
-.Fa bp
-to contain a
-.Li cmsghdr
-structure followed by a Routing header of the specified
-.Fa type .
-The
-.Li cmsg_len
-member of the
-.Li cmsghdr
-structure is initialized to the
-size of the structure plus the amount of space required by the
-Routing header.
-The
-.Li cmsg_level
-and
-.Li cmsg_type
-members are also initialized as required.
-.Pp
-The caller must allocate the buffer and its size can be determined by
-calling
-.Fn inet6_rthdr_space .
-.Pp
-Upon success the return value is the pointer to the
-.Li cmsghdr
-structure, and this is then used as the first argument to the next
-two functions.
-Upon an error the return value is
-.Dv NULL .
-.\"
-.Ss inet6_rthdr_add
-This function adds the address pointed to by
-.Fa addr
-to the end of the
-Routing header being constructed and sets the type of this hop to the
-value of
-.Fa flags .
-For an IPv6 Type 0 Routing header,
-.Fa flags
-must be
-either
-.Dv IPV6_RTHDR_LOOSE
-or
-.Dv IPV6_RTHDR_STRICT .
-.Pp
-If successful, the
-.Li cmsg_len
-member of the
-.Li cmsghdr
-structure is
-updated to account for the new address in the Routing header and the
-return value of the function is 0.
-Upon an error the return value of
-the function is -1.
-.\"
-.Ss inet6_rthdr_lasthop
-This function specifies the Strict/Loose flag for the final hop of a
-Routing header.
-For an IPv6 Type 0 Routing header,
-.Fa flags
-must be either
-.Dv IPV6_RTHDR_LOOSE
-or
-.Dv IPV6_RTHDR_STRICT .
-.Pp
-The return value of the function is 0 upon success, or -1 upon an error.
-.Pp
-Notice that a Routing header specifying
-.Li N
-intermediate nodes requires
-.Li N+1
-Strict/Loose flags.
-This requires
-.Li N
-calls to
-.Fn inet6_rthdr_add
-followed by one call to
-.Fn inet6_rthdr_lasthop .
-.\"
-.Ss inet6_rthdr_reverse
-This function is not yet implemented.
-When implemented, this should behave as follows.
-.Pp
-This function takes a Routing header that was received as ancillary
-data
-(pointed to by the first argument,
-.Fa in )
-and writes a new Routing
-header that sends datagrams along the reverse of that route.
-Both
-arguments are allowed to point to the same buffer
-(that is, the reversal can occur in place).
-.Pp
-The return value of the function is 0 on success, or -1 upon an
-error.
-.\"
-.Ss inet6_rthdr_segments
-This function returns the number of segments
-(addresses)
-contained in
-the Routing header described by
-.Fa cmsg .
-On success the return value is
-between 1 and 23, inclusive.
-The return value of the function is -1 upon an error.
-.\"
-.Ss inet6_rthdr_getaddr
-This function returns a pointer to the IPv6 address specified by
-.Fa index
-(which must have a value between 1 and the value returned by
-.Fn inet6_rthdr_segments )
-in the Routing header described by
-.Fa cmsg .
-An
-application should first call
-.Fn inet6_rthdr_segments
-to obtain the number of segments in the Routing header.
-.Pp
-Upon an error the return value of the function is
-.Dv NULL .
-.\"
-.Ss inet6_rthdr_getflags
-This function returns the flags value specified by
-.Fa index
-(which must
-have a value between 0 and the value returned by
-.Fn inet6_rthdr_segments )
-in the Routing header described by
-.Fa cmsg .
-For an IPv6 Type 0 Routing header the return value will be either
-.Dv IPV6_RTHDR_LOOSE
-or
-.Dv IPV6_RTHDR_STRICT .
-.Pp
-Upon an error the return value of the function is -1.
-.Pp
-Note: Addresses are indexed starting at 1, and flags starting at 0,
-to maintain consistency with the terminology and figures in RFC2460.
-.\"
-.Sh DIAGNOSTICS
-.Fn inet6_rthdr_space
-returns 0 on errors.
-.Pp
-.Fn inet6_rthdr_add ,
-.Fn inet6_rthdr_lasthop
-and
-.Fn inet6_rthdr_reverse
-return 0 on success, and returns -1 on error.
-.Pp
-.Fn inet6_rthdr_init
-and
-.Fn inet6_rthdr_getaddr
-return
-.Dv NULL
-on error.
-.Pp
-.Fn inet6_rthdr_segments
-and
-.Fn inet6_rthdr_getflags
-return -1 on error.
-.\"
-.Sh EXAMPLES
-RFC2292 gives comprehensive examples in chapter 8.
-.\"
-.Sh SEE ALSO
-.Rs
-.%A W. Stevens
-.%A M. Thomas
-.%T "Advanced Sockets API for IPv6"
-.%N RFC2292
-.%D February 1998
-.Re
-.Rs
-.%A S. Deering
-.%A R. Hinden
-.%T "Internet Protocol, Version 6 (IPv6) Specification"
-.%N RFC2460
-.%D December 1998
-.Re
-.\"
-.Sh HISTORY
-The implementation first appeared in KAME advanced networking kit.
-.\"
-.Sh STANDARDS
-The functions
-are documented in
-.Dq Advanced Sockets API for IPv6
-(RFC2292).
-.\"
-.Sh BUGS
-The text was shamelessly copied from RFC2292.
-.Pp
-.Fn inet6_rthdr_reverse
-is not implemented yet.
diff --git a/newlib/libc/sys/linux/net/inet_addr.c b/newlib/libc/sys/linux/net/inet_addr.c
deleted file mode 100644
index 874ca80e6..000000000
--- a/newlib/libc/sys/linux/net/inet_addr.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*	$KAME: inet_addr.c,v 1.5 2001/08/20 02:32:40 itojun Exp $	*/
-
-/*
- * ++Copyright++ 1983, 1990, 1993
- * -
- * Copyright (c) 1983, 1990, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_addr.c	8.1 (Berkeley) 6/17/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-
-/*
- * ASCII internet address interpretation routine.
- * The value returned is in network order.
- */
-in_addr_t		/* XXX should be struct in_addr :( */
-inet_addr(cp)
-	const char *cp;
-{
-	struct in_addr val;
-
-	if (inet_aton(cp, &val))
-		return (val.s_addr);
-	return (INADDR_NONE);
-}
-
-/* 
- * Check whether "cp" is a valid ASCII representation
- * of an Internet address and convert to a binary address.
- * Returns 1 if the address is valid, 0 if not.
- * This replaces inet_addr, the return value from which
- * cannot distinguish between failure and a local broadcast address.
- */
-int
-inet_aton(cp, addr)
-	const char *cp;
-	struct in_addr *addr;
-{
-	u_long parts[4];
-	in_addr_t val;
-	char *c;
-	char *endptr;
-	int gotend, n;
-
-	c = (char *)cp;
-	n = 0;
-	/*
-	 * Run through the string, grabbing numbers until
-	 * the end of the string, or some error
-	 */
-	gotend = 0;
-	while (!gotend) {
-		errno = 0;
-		val = strtoul(c, &endptr, 0);
-
-		if (errno == ERANGE)	/* Fail completely if it overflowed. */
-			return (0);
-		
-		/* 
-		 * If the whole string is invalid, endptr will equal
-		 * c.. this way we can make sure someone hasn't
-		 * gone '.12' or something which would get past
-		 * the next check.
-		 */
-		if (endptr == c)
-			return (0);
-		parts[n] = val;
-		c = endptr;
-
-		/* Check the next character past the previous number's end */
-		switch (*c) {
-		case '.' :
-			/* Make sure we only do 3 dots .. */
-			if (n == 3)	/* Whoops. Quit. */
-				return (0);
-			n++;
-			c++;
-			break;
-
-		case '\0':
-			gotend = 1;
-			break;
-
-		default:
-			if (isspace((unsigned char)*c)) {
-				gotend = 1;
-				break;
-			} else
-				return (0);	/* Invalid character, so fail */
-		}
-
-	}
-
-	/*
-	 * Concoct the address according to
-	 * the number of parts specified.
-	 */
-
-	switch (n) {
-	case 0:				/* a -- 32 bits */
-		/*
-		 * Nothing is necessary here.  Overflow checking was
-		 * already done in strtoul().
-		 */
-		break;
-	case 1:				/* a.b -- 8.24 bits */
-		if (val > 0xffffff || parts[0] > 0xff)
-			return (0);
-		val |= parts[0] << 24;
-		break;
-
-	case 2:				/* a.b.c -- 8.8.16 bits */
-		if (val > 0xffff || parts[0] > 0xff || parts[1] > 0xff)
-			return (0);
-		val |= (parts[0] << 24) | (parts[1] << 16);
-		break;
-
-	case 3:				/* a.b.c.d -- 8.8.8.8 bits */
-		if (val > 0xff || parts[0] > 0xff || parts[1] > 0xff ||
-		    parts[2] > 0xff)
-			return (0);
-		val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
-		break;
-	}
-
-	if (addr != NULL)
-		addr->s_addr = htonl(val);
-	return (1);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_addr
-__weak_reference(__inet_addr, inet_addr);
-#undef inet_aton
-__weak_reference(__inet_aton, inet_aton);
diff --git a/newlib/libc/sys/linux/net/inet_lnaof.c b/newlib/libc/sys/linux/net/inet_lnaof.c
deleted file mode 100644
index c6c999dd1..000000000
--- a/newlib/libc/sys/linux/net/inet_lnaof.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_lnaof.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-/*
- * Return the local network address portion of an
- * internet address; handles class a/b/c network
- * number formats.
- */
-in_addr_t
-inet_lnaof(in)
-	struct in_addr in;
-{
-	in_addr_t i = ntohl(in.s_addr);
-
-	if (IN_CLASSA(i))
-		return ((i)&IN_CLASSA_HOST);
-	else if (IN_CLASSB(i))
-		return ((i)&IN_CLASSB_HOST);
-	else
-		return ((i)&IN_CLASSC_HOST);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_lnaof
-__weak_reference(__inet_lnaof, inet_lnaof);
diff --git a/newlib/libc/sys/linux/net/inet_makeaddr.c b/newlib/libc/sys/linux/net/inet_makeaddr.c
deleted file mode 100644
index 339b2d5a7..000000000
--- a/newlib/libc/sys/linux/net/inet_makeaddr.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_makeaddr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-/*
- * Formulate an Internet address from network + host.  Used in
- * building addresses stored in the ifnet structure.
- */
-struct in_addr
-inet_makeaddr(net, host)
-	in_addr_t net, host;
-{
-	in_addr_t addr;
-
-	if (net < 128)
-		addr = (net << IN_CLASSA_NSHIFT) | (host & IN_CLASSA_HOST);
-	else if (net < 65536)
-		addr = (net << IN_CLASSB_NSHIFT) | (host & IN_CLASSB_HOST);
-	else if (net < 16777216L)
-		addr = (net << IN_CLASSC_NSHIFT) | (host & IN_CLASSC_HOST);
-	else
-		addr = net | host;
-	addr = htonl(addr);
-	return (*(struct in_addr *)&addr);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_makeaddr
-__weak_reference(__inet_makeaddr, inet_makeaddr);
diff --git a/newlib/libc/sys/linux/net/inet_net.3 b/newlib/libc/sys/linux/net/inet_net.3
deleted file mode 100644
index 1d43bcc1d..000000000
--- a/newlib/libc/sys/linux/net/inet_net.3
+++ /dev/null
@@ -1,157 +0,0 @@
-.\"	$NetBSD: inet_net.3,v 1.4 1999/03/22 19:44:52 garbled Exp $
-.\"
-.\" Copyright (c) 1997 The NetBSD Foundation, Inc.
-.\" All rights reserved.
-.\"
-.\" This code is derived from software contributed to The NetBSD Foundation
-.\" by Luke Mewburn.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"        This product includes software developed by the NetBSD
-.\"        Foundation, Inc. and its contributors.
-.\" 4. Neither the name of The NetBSD Foundation nor the names of its
-.\"    contributors may be used to endorse or promote products derived
-.\"    from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/lib/libc/net/inet_net.3,v 1.1 2001/08/31 10:54:44 ru Exp $
-.\"
-.Dd June 18, 1997
-.Dt INET_NET 3
-.Os
-.Sh NAME
-.Nm inet_net_ntop ,
-.Nm inet_net_pton
-.Nd Internet network number manipulation routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In netinet/in.h
-.In arpa/inet.h
-.Ft char *
-.Fn inet_net_ntop "int af" "const void *src" "int bits" "char *dst" "size_t size"
-.Ft int
-.Fn inet_net_pton "int af" "const char *src" "void *dst" "size_t size"
-.Sh DESCRIPTION
-The
-.Fn inet_net_ntop
-function converts an Internet network number from network format (usually a
-.Vt "struct in_addr"
-or some other binary form, in network byte order) to CIDR presentation format
-(suitable for external display purposes).
-.Fa bits
-is the number of bits in
-.Fa src
-that are the network number.
-It returns
-.Dv NULL
-if a system error occurs (in which case,
-.Va errno
-will have been set), or it returns a pointer to the destination string.
-.Pp
-The
-.Fn inet_net_pton
-function converts a presentation format Internet network number (that is,
-printable form as held in a character string) to network format (usually a
-.Vt "struct in_addr"
-or some other internal binary representation, in network byte order).
-It returns the number of bits (either computed based on the class, or
-specified with /CIDR), or \-1 if a failure occurred
-(in which case
-.Va errno
-will have been set.
-It will be set to
-.Er ENOENT
-if the Internet network number was not valid).
-.Pp
-The only value for
-.Fa af
-currently supported is
-.Dv AF_INET .
-.Fa size
-is the size of the result buffer
-.Fa dst .
-.Pp
-.Sh NETWORK NUMBERS (IP VERSION 4)
-Internet network numbers may be specified in one of the following forms:
-.Bd -literal -offset indent
-a.b.c.d/bits
-a.b.c.d
-a.b.c
-a.b
-a
-.Ed
-.Pp
-When four parts are specified, each is interpreted
-as a byte of data and assigned, from left to right,
-to the four bytes of an Internet network number.
-Note
-that when an Internet network number is viewed as a 32-bit
-integer quantity on a system that uses little-endian
-byte order (such as the
-.Tn Intel 386 , 486 ,
-and
-.Tn Pentium
-processors) the bytes referred to above appear as
-.Dq Li d.c.b.a .
-That is, little-endian bytes are ordered from right to left.
-.Pp
-When a three part number is specified, the last
-part is interpreted as a 16-bit quantity and placed
-in the rightmost two bytes of the Internet network number.
-This makes the three part number format convenient
-for specifying Class B network numbers as
-.Dq Li 128.net.host .
-.Pp
-When a two part number is supplied, the last part
-is interpreted as a 24-bit quantity and placed in
-the rightmost three bytes of the Internet network number.
-This makes the two part number format convenient
-for specifying Class A network numbers as
-.Dq Li net.host .
-.Pp
-When only one part is given, the value is stored
-directly in the Internet network number without any byte
-rearrangement.
-.Pp
-All numbers supplied as
-.Dq parts
-in a
-.Ql \&.
-notation
-may be decimal, octal, or hexadecimal, as specified
-in the C language (i.e., a leading 0x or 0X implies
-hexadecimal; otherwise, a leading 0 implies octal;
-otherwise, the number is interpreted as decimal).
-.Sh SEE ALSO
-.Xr byteorder 3 ,
-.Xr inet 3 ,
-.Xr networks 5
-.Sh HISTORY
-The
-.Fn inet_net_ntop
-and
-.Fn inet_net_pton
-functions appeared in BIND 4.9.4.
diff --git a/newlib/libc/sys/linux/net/inet_net_ntop.c b/newlib/libc/sys/linux/net/inet_net_ntop.c
deleted file mode 100644
index caa99f0ec..000000000
--- a/newlib/libc/sys/linux/net/inet_net_ntop.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static const char orig_rcsid[] = "From Id: inet_net_ntop.c,v 8.2 1996/08/08 06:54:44 vixie Exp";
-#endif
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef SPRINTF_CHAR
-# define SPRINTF(x) strlen(sprintf/**/x)
-#else
-# define SPRINTF(x) ((size_t)sprintf x)
-#endif
-
-static char *	inet_net_ntop_ipv4(const u_char *src, int bits, char *dst,
-		    size_t size);
-
-/*
- * char *
- * inet_net_ntop(af, src, bits, dst, size)
- *	convert network number from network to presentation format.
- *	generates CIDR style result always.
- * return:
- *	pointer to dst, or NULL if an error occurred (check errno).
- * author:
- *	Paul Vixie (ISC), July 1996
- */
-char *
-inet_net_ntop(af, src, bits, dst, size)
-	int af;
-	const void *src;
-	int bits;
-	char *dst;
-	size_t size;
-{
-	switch (af) {
-	case AF_INET:
-		return (inet_net_ntop_ipv4(src, bits, dst, size));
-	default:
-		errno = EAFNOSUPPORT;
-		return (NULL);
-	}
-}
-
-/*
- * static char *
- * inet_net_ntop_ipv4(src, bits, dst, size)
- *	convert IPv4 network number from network to presentation format.
- *	generates CIDR style result always.
- * return:
- *	pointer to dst, or NULL if an error occurred (check errno).
- * note:
- *	network byte order assumed.  this means 192.5.5.240/28 has
- *	0x11110000 in its fourth octet.
- * author:
- *	Paul Vixie (ISC), July 1996
- */
-static char *
-inet_net_ntop_ipv4(src, bits, dst, size)
-	const u_char *src;
-	int bits;
-	char *dst;
-	size_t size;
-{
-	char *odst = dst;
-	char *t;
-	u_int m;
-	int b;
-
-	if (bits < 0 || bits > 32) {
-		errno = EINVAL;
-		return (NULL);
-	}
-	if (bits == 0) {
-		if (size < sizeof "0")
-			goto emsgsize;
-		*dst++ = '0';
-		*dst = '\0';
-	}
-
-	/* Format whole octets. */
-	for (b = bits / 8; b > 0; b--) {
-		if (size < sizeof "255.")
-			goto emsgsize;
-		t = dst;
-		dst += SPRINTF((dst, "%u", *src++));
-		if (b > 1) {
-			*dst++ = '.';
-			*dst = '\0';
-		}
-		size -= (size_t)(dst - t);
-	}
-
-	/* Format partial octet. */
-	b = bits % 8;
-	if (b > 0) {
-		if (size < sizeof ".255")
-			goto emsgsize;
-		t = dst;
-		if (dst != odst)
-			*dst++ = '.';
-		m = ((1 << b) - 1) << (8 - b);
-		dst += SPRINTF((dst, "%u", *src & m));
-		size -= (size_t)(dst - t);
-	}
-
-	/* Format CIDR /width. */
-	if (size < sizeof "/32")
-		goto emsgsize;
-	dst += SPRINTF((dst, "/%u", bits));
-	return (odst);
-
- emsgsize:
-	errno = EMSGSIZE;
-	return (NULL);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_net_ntop
-__weak_reference(__inet_net_ntop, inet_net_ntop);
diff --git a/newlib/libc/sys/linux/net/inet_net_pton.c b/newlib/libc/sys/linux/net/inet_net_pton.c
deleted file mode 100644
index 9386d0517..000000000
--- a/newlib/libc/sys/linux/net/inet_net_pton.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static const char orig_rcsid[] = "From Id: inet_net_pton.c,v 1.8 1996/11/21 10:28:12 vixie Exp $";
-#endif
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <assert.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef SPRINTF_CHAR
-# define SPRINTF(x) strlen(sprintf/**/x)
-#else
-# define SPRINTF(x) ((size_t)sprintf x)
-#endif
-
-static int	inet_net_pton_ipv4(const char *src, u_char *dst, size_t size);
-
-/*
- * static int
- * inet_net_pton(af, src, dst, size)
- *	convert network number from presentation to network format.
- *	accepts hex octets, hex strings, decimal octets, and /CIDR.
- *	"size" is in bytes and describes "dst".
- * return:
- *	number of bits, either imputed classfully or specified with /CIDR,
- *	or -1 if some failure occurred (check errno).  ENOENT means it was
- *	not a valid network specification.
- * author:
- *	Paul Vixie (ISC), June 1996
- */
-int
-inet_net_pton(af, src, dst, size)
-	int af;
-	const char *src;
-	void *dst;
-	size_t size;
-{
-	switch (af) {
-	case AF_INET:
-		return (inet_net_pton_ipv4(src, dst, size));
-	default:
-		errno = EAFNOSUPPORT;
-		return (-1);
-	}
-}
-
-/*
- * static int
- * inet_net_pton_ipv4(src, dst, size)
- *	convert IPv4 network number from presentation to network format.
- *	accepts hex octets, hex strings, decimal octets, and /CIDR.
- *	"size" is in bytes and describes "dst".
- * return:
- *	number of bits, either imputed classfully or specified with /CIDR,
- *	or -1 if some failure occurred (check errno).  ENOENT means it was
- *	not an IPv4 network specification.
- * note:
- *	network byte order assumed.  this means 192.5.5.240/28 has
- *	0x11110000 in its fourth octet.
- * author:
- *	Paul Vixie (ISC), June 1996
- */
-static int
-inet_net_pton_ipv4(src, dst, size)
-	const char *src;
-	u_char *dst;
-	size_t size;
-{
-	static const char
-		xdigits[] = "0123456789abcdef",
-		digits[] = "0123456789";
-	int n, ch, tmp, dirty, bits;
-	const u_char *odst = dst;
-
-	ch = *src++;
-	if (ch == '0' && (src[0] == 'x' || src[0] == 'X')
-	    && isascii(src[1]) && isxdigit(src[1])) {
-		/* Hexadecimal: Eat nybble string. */
-		if (size <= 0)
-			goto emsgsize;
-		*dst = 0, dirty = 0;
-		src++;	/* skip x or X. */
-		while ((ch = *src++) != '\0' &&
-		       isascii(ch) && isxdigit(ch)) {
-			if (isupper(ch))
-				ch = tolower(ch);
-			n = strchr(xdigits, ch) - xdigits;
-			assert(n >= 0 && n <= 15);
-			*dst |= n;
-			if (!dirty++)
-				*dst <<= 4;
-			else if (size-- > 0)
-				*++dst = 0, dirty = 0;
-			else
-				goto emsgsize;
-		}
-		if (dirty)
-			size--;
-	} else if (isascii(ch) && isdigit(ch)) {
-		/* Decimal: eat dotted digit string. */
-		for (;;) {
-			tmp = 0;
-			do {
-				n = strchr(digits, ch) - digits;
-				assert(n >= 0 && n <= 9);
-				tmp *= 10;
-				tmp += n;
-				if (tmp > 255)
-					goto enoent;
-			} while ((ch = *src++) != '\0' &&
-				 isascii(ch) && isdigit(ch));
-			if (size-- <= 0)
-				goto emsgsize;
-			*dst++ = (u_char) tmp;
-			if (ch == '\0' || ch == '/')
-				break;
-			if (ch != '.')
-				goto enoent;
-			ch = *src++;
-			if (!isascii(ch) || !isdigit(ch))
-				goto enoent;
-		}
-	} else
-		goto enoent;
-
-	bits = -1;
-	if (ch == '/' && isascii(src[0]) && isdigit(src[0]) && dst > odst) {
-		/* CIDR width specifier.  Nothing can follow it. */
-		ch = *src++;	/* Skip over the /. */
-		bits = 0;
-		do {
-			n = strchr(digits, ch) - digits;
-			assert(n >= 0 && n <= 9);
-			bits *= 10;
-			bits += n;
-		} while ((ch = *src++) != '\0' && isascii(ch) && isdigit(ch));
-		if (ch != '\0')
-			goto enoent;
-		if (bits > 32)
-			goto emsgsize;
-	}
-
-	/* Firey death and destruction unless we prefetched EOS. */
-	if (ch != '\0')
-		goto enoent;
-
-	/* If nothing was written to the destination, we found no address. */
-	if (dst == odst)
-		goto enoent;
-	/* If no CIDR spec was given, infer width from net class. */
-	if (bits == -1) {
-		if (*odst >= 240)	/* Class E */
-			bits = 32;
-		else if (*odst >= 224)	/* Class D */
-			bits = 4;
-		else if (*odst >= 192)	/* Class C */
-			bits = 24;
-		else if (*odst >= 128)	/* Class B */
-			bits = 16;
-		else			/* Class A */
-			bits = 8;
-		/* If imputed mask is narrower than specified octets, widen. */
-		if (bits >= 8 && bits < ((dst - odst) * 8))
-			bits = (dst - odst) * 8;
-	}
-	/* Extend network to cover the actual mask. */
-	while (bits > ((dst - odst) * 8)) {
-		if (size-- <= 0)
-			goto emsgsize;
-		*dst++ = '\0';
-	}
-	return (bits);
-
- enoent:
-	errno = ENOENT;
-	return (-1);
-
- emsgsize:
-	errno = EMSGSIZE;
-	return (-1);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_net_pton
-__weak_reference(__inet_net_pton, inet_net_pton);
diff --git a/newlib/libc/sys/linux/net/inet_neta.c b/newlib/libc/sys/linux/net/inet_neta.c
deleted file mode 100644
index c45578348..000000000
--- a/newlib/libc/sys/linux/net/inet_neta.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static const char orig_rcsid[] = "From Id: inet_neta.c,v 8.2 1996/08/08 06:54:44 vixie Exp";
-#endif
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-
-#ifdef SPRINTF_CHAR
-# define SPRINTF(x) strlen(sprintf/**/x)
-#else
-# define SPRINTF(x) ((size_t)sprintf x)
-#endif
-
-/*
- * char *
- * inet_neta(src, dst, size)
- *	format a in_addr_t network number into presentation format.
- * return:
- *	pointer to dst, or NULL if an error occurred (check errno).
- * note:
- *	format of ``src'' is as for inet_network().
- * author:
- *	Paul Vixie (ISC), July 1996
- */
-char *
-inet_neta(src, dst, size)
-	in_addr_t src;
-	char *dst;
-	size_t size;
-{
-	char *odst = dst;
-	char *tp;
-
-	while (src & 0xffffffff) {
-		u_char b = (src & 0xff000000) >> 24;
-
-		src <<= 8;
-		if (b) {
-			if (size < sizeof "255.")
-				goto emsgsize;
-			tp = dst;
-			dst += SPRINTF((dst, "%u", b));
-			if (src != 0L) {
-				*dst++ = '.';
-				*dst = '\0';
-			}
-			size -= (size_t)(dst - tp);
-		}
-	}
-	if (dst == odst) {
-		if (size < sizeof "0.0.0.0")
-			goto emsgsize;
-		strcpy(dst, "0.0.0.0");
-	}
-	return (odst);
-
- emsgsize:
-	errno = EMSGSIZE;
-	return (NULL);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_neta
-__weak_reference(__inet_neta, inet_neta);
diff --git a/newlib/libc/sys/linux/net/inet_netof.c b/newlib/libc/sys/linux/net/inet_netof.c
deleted file mode 100644
index e2e84d340..000000000
--- a/newlib/libc/sys/linux/net/inet_netof.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_netof.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-/*
- * Return the network number from an internet
- * address; handles class a/b/c network #'s.
- */
-in_addr_t
-inet_netof(in)
-	struct in_addr in;
-{
-	in_addr_t i = ntohl(in.s_addr);
-
-	if (IN_CLASSA(i))
-		return (((i)&IN_CLASSA_NET) >> IN_CLASSA_NSHIFT);
-	else if (IN_CLASSB(i))
-		return (((i)&IN_CLASSB_NET) >> IN_CLASSB_NSHIFT);
-	else
-		return (((i)&IN_CLASSC_NET) >> IN_CLASSC_NSHIFT);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_netof
-__weak_reference(__inet_netof, inet_netof);
diff --git a/newlib/libc/sys/linux/net/inet_network.c b/newlib/libc/sys/linux/net/inet_network.c
deleted file mode 100644
index caf1d7869..000000000
--- a/newlib/libc/sys/linux/net/inet_network.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_network.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <ctype.h>
-
-/*
- * Internet network address interpretation routine.
- * The library routines call this routine to interpret
- * network numbers.
- */
-in_addr_t
-inet_network(cp)
-	const char *cp;
-{
-	in_addr_t val, base, n;
-	char c;
-	in_addr_t parts[4], *pp = parts;
-	int i;
-
-again:
-	val = 0; base = 10;
-	if (*cp == '0')
-		base = 8, cp++;
-	if (*cp == 'x' || *cp == 'X')
-		base = 16, cp++;
-	while ((c = *cp) != 0) {
-		if (isdigit((unsigned char)c)) {
-			val = (val * base) + (c - '0');
-			cp++;
-			continue;
-		}
-		if (base == 16 && isxdigit((unsigned char)c)) {
-			val = (val << 4) + (c + 10 - (islower((unsigned char)c) ? 'a' : 'A'));
-			cp++;
-			continue;
-		}
-		break;
-	}
-	if (*cp == '.') {
-		if (pp >= parts + 3)
-			return (INADDR_NONE);
-		*pp++ = val, cp++;
-		goto again;
-	}
-	if (*cp && !isspace((unsigned char)*cp))
-		return (INADDR_NONE);
-	*pp++ = val;
-	n = pp - parts;
-	for (val = 0, i = 0; i < n; i++) {
-		val <<= 8;
-		val |= parts[i] & 0xff;
-	}
-	return (val);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_network
-__weak_reference(__inet_network, inet_network);
diff --git a/newlib/libc/sys/linux/net/inet_ntoa.c b/newlib/libc/sys/linux/net/inet_ntoa.c
deleted file mode 100644
index dedc4768d..000000000
--- a/newlib/libc/sys/linux/net/inet_ntoa.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (c) 1983, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)inet_ntoa.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <stdio.h>
-#include <string.h>
-
-/*
- * Convert network-format internet address
- * to base 256 d.d.d.d representation.
- */
-char *
-inet_ntoa(in)
-	struct in_addr in;
-{
-	static char ret[18];
-
-	strcpy(ret, "[inet_ntoa error]");
-	(void) inet_ntop(AF_INET, &in, ret, sizeof ret);
-	return (ret);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_ntoa
-__weak_reference(__inet_ntoa, inet_ntoa);
diff --git a/newlib/libc/sys/linux/net/inet_ntop.c b/newlib/libc/sys/linux/net/inet_ntop.c
deleted file mode 100644
index 31746e456..000000000
--- a/newlib/libc/sys/linux/net/inet_ntop.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/* Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char rcsid[] = "$Id$";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-
-#define SPRINTF(x) ((socklen_t)sprintf x)
-
-/*
- * WARNING: Don't even consider trying to compile this on a system where
- * sizeof(int) < 4.  sizeof(int) > 4 is fine; all the world's not a VAX.
- */
-
-static const char *inet_ntop4(const u_char *src, char *dst, socklen_t size);
-static const char *inet_ntop6(const u_char *src, char *dst, socklen_t size);
-
-/* char *
- * inet_ntop(af, src, dst, size)
- *	convert a network format address to presentation format.
- * return:
- *	pointer to presentation format address (`dst'), or NULL (see errno).
- * author:
- *	Paul Vixie, 1996.
- */
-const char *
-inet_ntop(af, src, dst, size)
-	int af;
-	const void *src;
-	char *dst;
-	socklen_t size;
-{
-	switch (af) {
-	case AF_INET:
-		return (inet_ntop4(src, dst, size));
-	case AF_INET6:
-		return (inet_ntop6(src, dst, size));
-	default:
-		errno = EAFNOSUPPORT;
-		return (NULL);
-	}
-	/* NOTREACHED */
-}
-
-/* const char *
- * inet_ntop4(src, dst, size)
- *	format an IPv4 address, more or less like inet_ntoa()
- * return:
- *	`dst' (as a const)
- * notes:
- *	(1) uses no statics
- *	(2) takes a u_char* not an in_addr as input
- * author:
- *	Paul Vixie, 1996.
- */
-static const char *
-inet_ntop4(src, dst, size)
-	const u_char *src;
-	char *dst;
-	socklen_t size;
-{
-	static const char fmt[] = "%u.%u.%u.%u";
-	char tmp[sizeof "255.255.255.255"];
-
-	if (SPRINTF((tmp, fmt, src[0], src[1], src[2], src[3])) > size) {
-		errno = ENOSPC;
-		return (NULL);
-	}
-	strcpy(dst, tmp);
-	return (dst);
-}
-
-/* const char *
- * inet_ntop6(src, dst, size)
- *	convert IPv6 binary address into presentation (printable) format
- * author:
- *	Paul Vixie, 1996.
- */
-static const char *
-inet_ntop6(src, dst, size)
-	const u_char *src;
-	char *dst;
-	socklen_t size;
-{
-	/*
-	 * Note that int32_t and int16_t need only be "at least" large enough
-	 * to contain a value of the specified size.  On some systems, like
-	 * Crays, there is no such thing as an integer variable with 16 bits.
-	 * Keep this in mind if you think this function should have been coded
-	 * to use pointer overlays.  All the world's not a VAX.
-	 */
-	char tmp[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"], *tp;
-	struct { int base, len; } best, cur;
-	u_int words[NS_IN6ADDRSZ / NS_INT16SZ];
-	int i;
-
-	/*
-	 * Preprocess:
-	 *	Copy the input (bytewise) array into a wordwise array.
-	 *	Find the longest run of 0x00's in src[] for :: shorthanding.
-	 */
-	memset(words, '\0', sizeof words);
-	for (i = 0; i < NS_IN6ADDRSZ; i++)
-		words[i / 2] |= (src[i] << ((1 - (i % 2)) << 3));
-	best.base = -1;
-	cur.base = -1;
-	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
-		if (words[i] == 0) {
-			if (cur.base == -1)
-				cur.base = i, cur.len = 1;
-			else
-				cur.len++;
-		} else {
-			if (cur.base != -1) {
-				if (best.base == -1 || cur.len > best.len)
-					best = cur;
-				cur.base = -1;
-			}
-		}
-	}
-	if (cur.base != -1) {
-		if (best.base == -1 || cur.len > best.len)
-			best = cur;
-	}
-	if (best.base != -1 && best.len < 2)
-		best.base = -1;
-
-	/*
-	 * Format the result.
-	 */
-	tp = tmp;
-	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
-		/* Are we inside the best run of 0x00's? */
-		if (best.base != -1 && i >= best.base &&
-		    i < (best.base + best.len)) {
-			if (i == best.base)
-				*tp++ = ':';
-			continue;
-		}
-		/* Are we following an initial run of 0x00s or any real hex? */
-		if (i != 0)
-			*tp++ = ':';
-		/* Is this address an encapsulated IPv4? */
-		if (i == 6 && best.base == 0 &&
-		    (best.len == 6 || (best.len == 5 && words[5] == 0xffff))) {
-			if (!inet_ntop4(src+12, tp, sizeof tmp - (tp - tmp)))
-				return (NULL);
-			tp += strlen(tp);
-			break;
-		}
-		tp += SPRINTF((tp, "%x", words[i]));
-	}
-	/* Was it a trailing run of 0x00's? */
-	if (best.base != -1 && (best.base + best.len) ==
-	    (NS_IN6ADDRSZ / NS_INT16SZ))
-		*tp++ = ':';
-	*tp++ = '\0';
-
-	/*
-	 * Check for overflow, copy, and we're done.
-	 */
-	if ((socklen_t)(tp - tmp) > size) {
-		errno = ENOSPC;
-		return (NULL);
-	}
-	strcpy(dst, tmp);
-	return (dst);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_ntop
-__weak_reference(__inet_ntop, inet_ntop);
diff --git a/newlib/libc/sys/linux/net/inet_pton.c b/newlib/libc/sys/linux/net/inet_pton.c
deleted file mode 100644
index eeabbb481..000000000
--- a/newlib/libc/sys/linux/net/inet_pton.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*	$KAME: inet_pton.c,v 1.5 2001/08/20 02:32:40 itojun Exp $	*/
-
-/* Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <string.h>
-#include <errno.h>
-
-/*
- * WARNING: Don't even consider trying to compile this on a system where
- * sizeof(int) < 4.  sizeof(int) > 4 is fine; all the world's not a VAX.
- */
-
-static int	inet_pton4(const char *src, u_char *dst);
-static int	inet_pton6(const char *src, u_char *dst);
-
-/* int
- * inet_pton(af, src, dst)
- *	convert from presentation format (which usually means ASCII printable)
- *	to network format (which is usually some kind of binary format).
- * return:
- *	1 if the address was valid for the specified address family
- *	0 if the address wasn't valid (`dst' is untouched in this case)
- *	-1 if some other error occurred (`dst' is untouched in this case, too)
- * author:
- *	Paul Vixie, 1996.
- */
-int
-inet_pton(af, src, dst)
-	int af;
-	const char *src;
-	void *dst;
-{
-	switch (af) {
-	case AF_INET:
-		return (inet_pton4(src, dst));
-	case AF_INET6:
-		return (inet_pton6(src, dst));
-	default:
-		errno = EAFNOSUPPORT;
-		return (-1);
-	}
-	/* NOTREACHED */
-}
-
-/* int
- * inet_pton4(src, dst)
- *	like inet_aton() but without all the hexadecimal and shorthand.
- * return:
- *	1 if `src' is a valid dotted quad, else 0.
- * notice:
- *	does not touch `dst' unless it's returning 1.
- * author:
- *	Paul Vixie, 1996.
- */
-static int
-inet_pton4(src, dst)
-	const char *src;
-	u_char *dst;
-{
-	static const char digits[] = "0123456789";
-	int saw_digit, octets, ch;
-	u_char tmp[NS_INADDRSZ], *tp;
-
-	saw_digit = 0;
-	octets = 0;
-	*(tp = tmp) = 0;
-	while ((ch = *src++) != '\0') {
-		const char *pch;
-
-		if ((pch = strchr(digits, ch)) != NULL) {
-			u_int new = *tp * 10 + (pch - digits);
-
-			if (new > 255)
-				return (0);
-			*tp = new;
-			if (! saw_digit) {
-				if (++octets > 4)
-					return (0);
-				saw_digit = 1;
-			}
-		} else if (ch == '.' && saw_digit) {
-			if (octets == 4)
-				return (0);
-			*++tp = 0;
-			saw_digit = 0;
-		} else
-			return (0);
-	}
-	if (octets < 4)
-		return (0);
-
-	memcpy(dst, tmp, NS_INADDRSZ);
-	return (1);
-}
-
-/* int
- * inet_pton6(src, dst)
- *	convert presentation level address to network order binary form.
- * return:
- *	1 if `src' is a valid [RFC1884 2.2] address, else 0.
- * notice:
- *	(1) does not touch `dst' unless it's returning 1.
- *	(2) :: in a full address is silently ignored.
- * credit:
- *	inspired by Mark Andrews.
- * author:
- *	Paul Vixie, 1996.
- */
-static int
-inet_pton6(src, dst)
-	const char *src;
-	u_char *dst;
-{
-	static const char xdigits_l[] = "0123456789abcdef",
-			  xdigits_u[] = "0123456789ABCDEF";
-	u_char tmp[NS_IN6ADDRSZ], *tp, *endp, *colonp;
-	const char *xdigits, *curtok;
-	int ch, saw_xdigit;
-	u_int val;
-
-	memset((tp = tmp), '\0', NS_IN6ADDRSZ);
-	endp = tp + NS_IN6ADDRSZ;
-	colonp = NULL;
-	/* Leading :: requires some special handling. */
-	if (*src == ':')
-		if (*++src != ':')
-			return (0);
-	curtok = src;
-	saw_xdigit = 0;
-	val = 0;
-	while ((ch = *src++) != '\0') {
-		const char *pch;
-
-		if ((pch = strchr((xdigits = xdigits_l), ch)) == NULL)
-			pch = strchr((xdigits = xdigits_u), ch);
-		if (pch != NULL) {
-			val <<= 4;
-			val |= (pch - xdigits);
-			if (val > 0xffff)
-				return (0);
-			saw_xdigit = 1;
-			continue;
-		}
-		if (ch == ':') {
-			curtok = src;
-			if (!saw_xdigit) {
-				if (colonp)
-					return (0);
-				colonp = tp;
-				continue;
-			}
-			if (tp + NS_INT16SZ > endp)
-				return (0);
-			*tp++ = (u_char) (val >> 8) & 0xff;
-			*tp++ = (u_char) val & 0xff;
-			saw_xdigit = 0;
-			val = 0;
-			continue;
-		}
-		if (ch == '.' && ((tp + NS_INADDRSZ) <= endp) &&
-		    inet_pton4(curtok, tp) > 0) {
-			tp += NS_INADDRSZ;
-			saw_xdigit = 0;
-			break;	/* '\0' was seen by inet_pton4(). */
-		}
-		return (0);
-	}
-	if (saw_xdigit) {
-		if (tp + NS_INT16SZ > endp)
-			return (0);
-		*tp++ = (u_char) (val >> 8) & 0xff;
-		*tp++ = (u_char) val & 0xff;
-	}
-	if (colonp != NULL) {
-		/*
-		 * Since some memmove()'s erroneously fail to handle
-		 * overlapping regions, we'll do the shift by hand.
-		 */
-		const int n = tp - colonp;
-		int i;
-
-		for (i = 1; i <= n; i++) {
-			endp[- i] = colonp[n - i];
-			colonp[n - i] = 0;
-		}
-		tp = endp;
-	}
-	if (tp != endp)
-		return (0);
-	memcpy(dst, tmp, NS_IN6ADDRSZ);
-	return (1);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_pton
-__weak_reference(__inet_pton, inet_pton);
diff --git a/newlib/libc/sys/linux/net/innetgr-stub.c b/newlib/libc/sys/linux/net/innetgr-stub.c
deleted file mode 100644
index 690d82e14..000000000
--- a/newlib/libc/sys/linux/net/innetgr-stub.c
+++ /dev/null
@@ -1,7 +0,0 @@
-int
-innetgr(const char *netgroup, const char *host, const char *user,
-	     const char *domain)
-{
-	return 0;
-}
-
diff --git a/newlib/libc/sys/linux/net/ip6opt.c b/newlib/libc/sys/linux/net/ip6opt.c
deleted file mode 100644
index f3f51d507..000000000
--- a/newlib/libc/sys/linux/net/ip6opt.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <netinet/ip6.h>
-
-#include <string.h>
-#include <stdio.h>
-
-static int ip6optlen(u_int8_t *opt, u_int8_t *lim);
-static void inet6_insert_padopt(u_char *p, int len);
-
-/*
- * This function returns the number of bytes required to hold an option
- * when it is stored as ancillary data, including the cmsghdr structure
- * at the beginning, and any padding at the end (to make its size a
- * multiple of 8 bytes).  The argument is the size of the structure
- * defining the option, which must include any pad bytes at the
- * beginning (the value y in the alignment term "xn + y"), the type
- * byte, the length byte, and the option data.
- */
-int
-inet6_option_space(nbytes)
-	int nbytes;
-{
-	nbytes += 2;	/* we need space for nxt-hdr and length fields */
-	return(CMSG_SPACE((nbytes + 7) & ~7));
-}
-
-/*
- * This function is called once per ancillary data object that will
- * contain either Hop-by-Hop or Destination options.  It returns 0 on
- * success or -1 on an error.
- */
-int
-inet6_option_init(bp, cmsgp, type)
-	void *bp;
-	struct cmsghdr **cmsgp;
-	int type;
-{
-	struct cmsghdr *ch = (struct cmsghdr *)bp;
-
-	/* argument validation */
-	if (type != IPV6_HOPOPTS && type != IPV6_DSTOPTS)
-		return(-1);
-	
-	ch->cmsg_level = IPPROTO_IPV6;
-	ch->cmsg_type = type;
-	ch->cmsg_len = CMSG_LEN(0);
-
-	*cmsgp = ch;
-	return(0);
-}
-
-/*
- * This function appends a Hop-by-Hop option or a Destination option
- * into an ancillary data object that has been initialized by
- * inet6_option_init().  This function returns 0 if it succeeds or -1 on
- * an error.
- * multx is the value x in the alignment term "xn + y" described
- * earlier.  It must have a value of 1, 2, 4, or 8.
- * plusy is the value y in the alignment term "xn + y" described
- * earlier.  It must have a value between 0 and 7, inclusive.
- */
-int
-inet6_option_append(cmsg, typep, multx, plusy)
-	struct cmsghdr *cmsg;
-	const u_int8_t *typep;
-	int multx;
-	int plusy;
-{
-	int padlen, optlen, off;
-	u_char *bp = (u_char *)cmsg + cmsg->cmsg_len;
-	struct ip6_ext *eh = (struct ip6_ext *)CMSG_DATA(cmsg);
-
-	/* argument validation */
-	if (multx != 1 && multx != 2 && multx != 4 && multx != 8)
-		return(-1);
-	if (plusy < 0 || plusy > 7)
-		return(-1);
-	if (typep[0] > 255)
-		return(-1);
-
-	/*
-	 * If this is the first option, allocate space for the
-	 * first 2 bytes(for next header and length fields) of
-	 * the option header.
-	 */
-	if (bp == (u_char *)eh) {
-		bp += 2;
-		cmsg->cmsg_len += 2;
-	}
-
-	/* calculate pad length before the option. */
-	off = bp - (u_char *)eh;
-	padlen = (((off % multx) + (multx - 1)) & ~(multx - 1)) -
-		(off % multx);
-	padlen += plusy;
-	/* insert padding */
-	inet6_insert_padopt(bp, padlen);
-	cmsg->cmsg_len += padlen;
-	bp += padlen;
-
-	/* copy the option */
-	if (typep[0] == IP6OPT_PAD1)
-		optlen = 1;
-	else
-		optlen = typep[1] + 2;
-	memcpy(bp, typep, optlen);
-	bp += optlen;
-	cmsg->cmsg_len += optlen;
-
-	/* calculate pad length after the option and insert the padding */
-	off = bp - (u_char *)eh;
-	padlen = ((off + 7) & ~7) - off;
-	inet6_insert_padopt(bp, padlen);
-	bp += padlen;
-	cmsg->cmsg_len += padlen;
-
-	/* update the length field of the ip6 option header */
-	eh->ip6e_len = ((bp - (u_char *)eh) >> 3) - 1;
-
-	return(0);
-}
-
-/*
- * This function appends a Hop-by-Hop option or a Destination option
- * into an ancillary data object that has been initialized by
- * inet6_option_init().  This function returns a pointer to the 8-bit
- * option type field that starts the option on success, or NULL on an
- * error.
- * The difference between this function and inet6_option_append() is
- * that the latter copies the contents of a previously built option into
- * the ancillary data object while the current function returns a
- * pointer to the space in the data object where the option's TLV must
- * then be built by the caller.
- * 
- */
-u_int8_t *
-inet6_option_alloc(cmsg, datalen, multx, plusy)
-	struct cmsghdr *cmsg;
-	int datalen;
-	int multx;
-	int plusy;
-{
-	int padlen, off;
-	u_int8_t *bp = (u_char *)cmsg + cmsg->cmsg_len;
-	u_int8_t *retval;
-	struct ip6_ext *eh = (struct ip6_ext *)CMSG_DATA(cmsg);
-
-	/* argument validation */
-	if (multx != 1 && multx != 2 && multx != 4 && multx != 8)
-		return(NULL);
-	if (plusy < 0 || plusy > 7)
-		return(NULL);
-
-	/*
-	 * If this is the first option, allocate space for the
-	 * first 2 bytes(for next header and length fields) of
-	 * the option header.
-	 */
-	if (bp == (u_char *)eh) {
-		bp += 2;
-		cmsg->cmsg_len += 2;
-	}
-
-	/* calculate pad length before the option. */
-	off = bp - (u_char *)eh;
-	padlen = (((off % multx) + (multx - 1)) & ~(multx - 1)) -
-		(off % multx);
-	padlen += plusy;
-	/* insert padding */
-	inet6_insert_padopt(bp, padlen);
-	cmsg->cmsg_len += padlen;
-	bp += padlen;
-
-	/* keep space to store specified length of data */
-	retval = bp;
-	bp += datalen;
-	cmsg->cmsg_len += datalen;
-
-	/* calculate pad length after the option and insert the padding */
-	off = bp - (u_char *)eh;
-	padlen = ((off + 7) & ~7) - off;
-	inet6_insert_padopt(bp, padlen);
-	bp += padlen;
-	cmsg->cmsg_len += padlen;
-
-	/* update the length field of the ip6 option header */
-	eh->ip6e_len = ((bp - (u_char *)eh) >> 3) - 1;
-
-	return(retval);
-}
-
-/*
- * This function processes the next Hop-by-Hop option or Destination
- * option in an ancillary data object.  If another option remains to be
- * processed, the return value of the function is 0 and *tptrp points to
- * the 8-bit option type field (which is followed by the 8-bit option
- * data length, followed by the option data).  If no more options remain
- * to be processed, the return value is -1 and *tptrp is NULL.  If an
- * error occurs, the return value is -1 and *tptrp is not NULL.
- * (RFC 2292, 6.3.5)
- */
-int
-inet6_option_next(cmsg, tptrp)
-	const struct cmsghdr *cmsg;
-	u_int8_t **tptrp;
-{
-	struct ip6_ext *ip6e;
-	int hdrlen, optlen;
-	u_int8_t *lim;
-
-	if (cmsg->cmsg_level != IPPROTO_IPV6 ||
-	    (cmsg->cmsg_type != IPV6_HOPOPTS &&
-	     cmsg->cmsg_type != IPV6_DSTOPTS))
-		return(-1);
-
-	/* message length validation */
-	if (cmsg->cmsg_len < CMSG_SPACE(sizeof(struct ip6_ext)))
-		return(-1);
-	ip6e = (struct ip6_ext *)CMSG_DATA(cmsg);
-	hdrlen = (ip6e->ip6e_len + 1) << 3;
-	if (cmsg->cmsg_len < CMSG_SPACE(hdrlen))
-		return(-1);
-
-	/*
-	 * If the caller does not specify the starting point,
-	 * simply return the 1st option.
-	 * Otherwise, search the option list for the next option.
-	 */
-	lim = (u_int8_t *)ip6e + hdrlen;
-	if (*tptrp == NULL)
-		*tptrp = (u_int8_t *)(ip6e + 1);
-	else {
-		if ((optlen = ip6optlen(*tptrp, lim)) == 0)
-			return(-1);
-
-		*tptrp = *tptrp + optlen;
-	}
-	if (*tptrp >= lim) {	/* there is no option */
-		*tptrp = NULL;
-		return(-1);
-	}
-	/*
-	 * Finally, checks if the next option is safely stored in the
-	 * cmsg data.
-	 */
-	if (ip6optlen(*tptrp, lim) == 0)
-		return(-1);
-	else
-		return(0);
-}
-
-/*
- * This function is similar to the inet6_option_next() function,
- * except this function lets the caller specify the option type to be
- * searched for, instead of always returning the next option in the
- * ancillary data object.
- * Note: RFC 2292 says the type of tptrp is u_int8_t *, but we think
- *       it's a typo. The variable should be type of u_int8_t **.
- */
-int
-inet6_option_find(cmsg, tptrp, type)
-	const struct cmsghdr *cmsg;
-	u_int8_t **tptrp;
-	int type;
-{
-	struct ip6_ext *ip6e;
-	int hdrlen, optlen;
-	u_int8_t *optp, *lim;
-
-	if (cmsg->cmsg_level != IPPROTO_IPV6 ||
-	    (cmsg->cmsg_type != IPV6_HOPOPTS &&
-	     cmsg->cmsg_type != IPV6_DSTOPTS))
-		return(-1);
-
-	/* message length validation */
-	if (cmsg->cmsg_len < CMSG_SPACE(sizeof(struct ip6_ext)))
-		return(-1);
-	ip6e = (struct ip6_ext *)CMSG_DATA(cmsg);
-	hdrlen = (ip6e->ip6e_len + 1) << 3;
-	if (cmsg->cmsg_len < CMSG_SPACE(hdrlen))
-		return(-1);	
-
-	/*
-	 * If the caller does not specify the starting point,
-	 * search from the beginning of the option list.
-	 * Otherwise, search from *the next option* of the specified point.
-	 */
-	lim = (u_int8_t *)ip6e + hdrlen;
-	if (*tptrp == NULL)
-		*tptrp = (u_int8_t *)(ip6e + 1);
-	else {
-		if ((optlen = ip6optlen(*tptrp, lim)) == 0)
-			return(-1);
-
-		*tptrp = *tptrp + optlen;
-	}
-	for (optp = *tptrp; optp < lim; optp += optlen) {
-		if (*optp == type) {
-			*tptrp = optp;
-			return(0);
-		}
-		if ((optlen = ip6optlen(optp, lim)) == 0)
-			return(-1);
-	}
-
-	/* search failed */
-	*tptrp = NULL;
-	return(-1);
-}
-
-/*
- * Calculate the length of a given IPv6 option. Also checks
- * if the option is safely stored in user's buffer according to the
- * calculated length and the limitation of the buffer.
- */
-static int
-ip6optlen(opt, lim)
-	u_int8_t *opt, *lim;
-{
-	int optlen;
-
-	if (*opt == IP6OPT_PAD1)
-		optlen = 1;
-	else {
-		/* is there enough space to store type and len? */
-		if (opt + 2 > lim)
-			return(0);
-		optlen = *(opt + 1) + 2;
-	}
-	if (opt + optlen <= lim)
-		return(optlen);
-
-	return(0);
-}
-
-static void
-inet6_insert_padopt(u_char *p, int len)
-{
-	switch(len) {
-	 case 0:
-		 return;
-	 case 1:
-		 p[0] = IP6OPT_PAD1;
-		 return;
-	 default:
-		 p[0] = IP6OPT_PADN;
-		 p[1] = len - 2; 
-		 memset(&p[2], 0, len - 2);
-		 return;
-	}
-}
diff --git a/newlib/libc/sys/linux/net/iso_addr.3 b/newlib/libc/sys/linux/net/iso_addr.3
deleted file mode 100644
index dc843c315..000000000
--- a/newlib/libc/sys/linux/net/iso_addr.3
+++ /dev/null
@@ -1,113 +0,0 @@
-.\" Copyright (c) 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)iso_addr.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/iso_addr.3,v 1.7 2001/10/01 16:08:56 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt ISO_ADDR 3
-.Os
-.Sh NAME
-.Nm iso_addr ,
-.Nm iso_ntoa
-.Nd "elementary network address conversion routines for Open System Interconnection
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netiso/iso.h
-.Ft struct iso_addr *
-.Fn iso_addr "char *cp"
-.Ft char *
-.Fn iso_ntoa "struct iso_addr *isoa"
-.Sh DESCRIPTION
-The routine
-.Fn iso_addr
-interprets character strings representing
-.Tn OSI
-addresses, returning binary information suitable
-for use in system calls.
-The routine
-.Fn iso_ntoa
-takes
-.Tn OSI
-addresses and returns
-.Tn ASCII
-strings representing NSAPs (network service
-access points) in a
-notation inverse to that accepted by
-.Fn iso_addr .
-.Pp
-Unfortunately, no universal standard exists for representing
-.Tn OSI
-network addresses.
-.Pp
-The format employed by
-.Fn iso_addr
-is a sequence of hexadecimal
-.Dq digits
-(optionally separated by periods),
-of the form:
-.Bd -ragged -offset indent
-<hex digits>.<hex digits>.<hex digits>
-.Ed
-.Pp
-Each pair of hexadecimal digits represents a byte
-with the leading digit indicating the higher-ordered bits.
-A period following an even number of bytes has no
-effect (but may be used to increase legibility).
-A period following an odd number of bytes has the
-effect of causing the byte of address being translated
-to have its higher order bits filled with zeros.
-.Sh RETURN VALUES
-.Fn iso_ntoa
-always returns a null terminated string.
-.Fn iso_addr
-always returns a pointer to a struct iso_addr.
-(See
-.Sx BUGS . )
-.Sh SEE ALSO
-.Xr iso 4
-.Sh HISTORY
-The
-.Fn iso_addr
-and
-.Fn iso_ntoa
-functions appeared in
-.Bx 4.3 Reno .
-.Sh BUGS
-The returned values
-reside in a static memory area.
-.Pp
-The function
-.Fn iso_addr
-should diagnose improperly formed input, and there should be an unambiguous
-way to recognize this.
diff --git a/newlib/libc/sys/linux/net/iso_addr.c b/newlib/libc/sys/linux/net/iso_addr.c
deleted file mode 100644
index e943122f8..000000000
--- a/newlib/libc/sys/linux/net/iso_addr.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)iso_addr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <netiso/iso.h>
-#include <string.h>
-
-/* States*/
-#define VIRGIN	0
-#define GOTONE	1
-#define GOTTWO	2
-/* Inputs */
-#define	DIGIT	(4*0)
-#define	END	(4*1)
-#define DELIM	(4*2)
-
-struct iso_addr *
-iso_addr(addr)
-	const char *addr;
-{
-	static struct iso_addr out_addr;
-	char *cp = out_addr.isoa_genaddr;
-	char *cplim = cp + sizeof(out_addr.isoa_genaddr);
-	int byte = 0, state = VIRGIN, new;
-
-	bzero((char *)&out_addr, sizeof(out_addr));
-	do {
-		if ((*addr >= '0') && (*addr <= '9')) {
-			new = *addr - '0';
-		} else if ((*addr >= 'a') && (*addr <= 'f')) {
-			new = *addr - 'a' + 10;
-		} else if ((*addr >= 'A') && (*addr <= 'F')) {
-			new = *addr - 'A' + 10;
-		} else if (*addr == 0)
-			state |= END;
-		else
-			state |= DELIM;
-		addr++;
-		switch (state /* | INPUT */) {
-		case GOTTWO | DIGIT:
-			*cp++ = byte; /*FALLTHROUGH*/
-		case VIRGIN | DIGIT:
-			state = GOTONE; byte = new; continue;
-		case GOTONE | DIGIT:
-			state = GOTTWO; byte = new + (byte << 4); continue;
-		default: /* | DELIM */
-			state = VIRGIN; *cp++ = byte; byte = 0; continue;
-		case GOTONE | END:
-		case GOTTWO | END:
-			*cp++ = byte; /* FALLTHROUGH */
-		case VIRGIN | END:
-			break;
-		}
-		break;
-	} while (cp < cplim);
-	out_addr.isoa_len = cp - out_addr.isoa_genaddr;
-	return (&out_addr);
-}
-
-static char hexlist[] = "0123456789abcdef";
-
-char *
-iso_ntoa(isoa)
-	const struct iso_addr *isoa;
-{
-	static char tmpbuf[sizeof(isoa->isoa_genaddr)*3];
-	const u_char *binary;
-	char *cp;
-	int i;
-
-	binary = isoa->isoa_genaddr;
-	cp = tmpbuf;
-
-	for (i = 0; i < isoa->isoa_len; i++) {
-		*cp++ = hexlist[*binary >> 4];
-		*cp++ = hexlist[*binary++ & 0xf];
-
-		if ((((i % 2) == 0) && ((i + 1) < isoa->isoa_len)))
-			*cp++ = '.';
-	}
-	*cp = '\0';
-	return tmpbuf;
-}
diff --git a/newlib/libc/sys/linux/net/issetugid-stub.c b/newlib/libc/sys/linux/net/issetugid-stub.c
deleted file mode 100644
index b3aac0b63..000000000
--- a/newlib/libc/sys/linux/net/issetugid-stub.c
+++ /dev/null
@@ -1,5 +0,0 @@
-int
-issetugid(void)
-{
-	return 0;
-}
diff --git a/newlib/libc/sys/linux/net/linkaddr.3 b/newlib/libc/sys/linux/net/linkaddr.3
deleted file mode 100644
index 1d664630b..000000000
--- a/newlib/libc/sys/linux/net/linkaddr.3
+++ /dev/null
@@ -1,140 +0,0 @@
-.\" Copyright (c) 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" Donn Seeley at BSDI.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)linkaddr.3	8.1 (Berkeley) 7/28/93
-.\" $FreeBSD: src/lib/libc/net/linkaddr.3,v 1.12 2001/10/01 16:08:56 ru Exp $
-.\"
-.Dd June 17, 1996
-.Dt LINK_ADDR 3
-.Os
-.Sh NAME
-.Nm link_addr ,
-.Nm link_ntoa
-.Nd elementary address specification routines for link level access
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In sys/socket.h
-.In net/if_dl.h
-.Ft void
-.Fn link_addr "const char *addr" "struct sockaddr_dl *sdl"
-.Ft char *
-.Fn link_ntoa "const struct sockaddr_dl *sdl"
-.Sh DESCRIPTION
-The routine
-.Fn link_addr
-interprets character strings representing
-link-level addresses, returning binary information suitable
-for use in system calls.
-The routine
-.Fn link_ntoa
-takes
-a link-level
-address and returns an
-.Tn ASCII
-string representing some of the information present,
-including the link level address itself, and the interface name
-or number, if present.
-This facility is experimental and is
-still subject to change.
-.Pp
-For
-.Fn link_addr ,
-the string
-.Fa addr
-may contain
-an optional network interface identifier of the form
-.Dq "name unit-number" ,
-suitable for the first argument to
-.Xr ifconfig 8 ,
-followed in all cases by a colon and
-an interface address in the form of
-groups of hexadecimal digits
-separated by periods.
-Each group represents a byte of address;
-address bytes are filled left to right from
-low order bytes through high order bytes.
-.Pp
-.\" A regular expression may make this format clearer:
-.\" .Bd -literal -offset indent
-.\" ([a-z]+[0-9]+:)?[0-9a-f]+(\e.[0-9a-f]+)*
-.\" .Ed
-.\" .Pp
-Thus
-.Li le0:8.0.9.13.d.30
-represents an ethernet address
-to be transmitted on the first Lance ethernet interface.
-.Pp
-The direct use of these functions is deprecated in favor of the
-.Xr addr2ascii 3
-interface; however, portable programs cannot rely on the latter as it is
-not yet widely implemented.
-.Sh RETURN VALUES
-.Fn link_ntoa
-always returns a null terminated string.
-.Fn link_addr
-has no return value.
-(See
-.Sx BUGS . )
-.Sh SEE ALSO
-.Xr addr2ascii 3
-.\" .Xr iso 4
-.Sh HISTORY
-The
-.Fn link_addr
-and
-.Fn link_ntoa
-functions appeared in
-.Bx 4.3 Reno  .
-.Sh BUGS
-The returned values for link_ntoa
-reside in a static memory area.
-.Pp
-The function
-.Fn link_addr
-should diagnose improperly formed input, and there should be an unambiguous
-way to recognize this.
-.Pp
-If the
-.Va sdl_len
-field of the link socket address
-.Fa sdl
-is 0,
-.Fn link_ntoa
-will not insert a colon before the interface address bytes.
-If this translated address is given to
-.Fn link_addr
-without inserting an initial colon,
-the latter will not interpret it correctly.
diff --git a/newlib/libc/sys/linux/net/linkaddr.c b/newlib/libc/sys/linux/net/linkaddr.c
deleted file mode 100644
index deeaa09ea..000000000
--- a/newlib/libc/sys/linux/net/linkaddr.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*-
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)linkaddr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <net/if_dl.h>
-#include <string.h>
-
-/* States*/
-#define NAMING	0
-#define GOTONE	1
-#define GOTTWO	2
-#define RESET	3
-/* Inputs */
-#define	DIGIT	(4*0)
-#define	END	(4*1)
-#define DELIM	(4*2)
-#define LETTER	(4*3)
-
-void
-link_addr(addr, sdl)
-	const char *addr;
-	struct sockaddr_dl *sdl;
-{
-	char *cp = sdl->sdl_data;
-	char *cplim = sdl->sdl_len + (char *)sdl;
-	int byte = 0, state = NAMING, new = 0;
-
-	bzero((char *)&sdl->sdl_family, sdl->sdl_len - 1);
-	sdl->sdl_family = AF_INET;
-	do {
-		state &= ~LETTER;
-		if ((*addr >= '0') && (*addr <= '9')) {
-			new = *addr - '0';
-		} else if ((*addr >= 'a') && (*addr <= 'f')) {
-			new = *addr - 'a' + 10;
-		} else if ((*addr >= 'A') && (*addr <= 'F')) {
-			new = *addr - 'A' + 10;
-		} else if (*addr == 0) {
-			state |= END;
-		} else if (state == NAMING &&
-			   (((*addr >= 'A') && (*addr <= 'Z')) ||
-			   ((*addr >= 'a') && (*addr <= 'z'))))
-			state |= LETTER;
-		else
-			state |= DELIM;
-		addr++;
-		switch (state /* | INPUT */) {
-		case NAMING | DIGIT:
-		case NAMING | LETTER:
-			*cp++ = addr[-1];
-			continue;
-		case NAMING | DELIM:
-			state = RESET;
-			sdl->sdl_nlen = cp - sdl->sdl_data;
-			continue;
-		case GOTTWO | DIGIT:
-			*cp++ = byte;
-			/* FALLTHROUGH */
-		case RESET | DIGIT:
-			state = GOTONE;
-			byte = new;
-			continue;
-		case GOTONE | DIGIT:
-			state = GOTTWO;
-			byte = new + (byte << 4);
-			continue;
-		default: /* | DELIM */
-			state = RESET;
-			*cp++ = byte;
-			byte = 0;
-			continue;
-		case GOTONE | END:
-		case GOTTWO | END:
-			*cp++ = byte;
-			/* FALLTHROUGH */
-		case RESET | END:
-			break;
-		}
-		break;
-	} while (cp < cplim);
-	sdl->sdl_alen = cp - LLADDR(sdl);
-	new = cp - (char *)sdl;
-	if (new > sizeof(*sdl))
-		sdl->sdl_len = new;
-	return;
-}
-
-static char hexlist[] = "0123456789abcdef";
-
-char *
-link_ntoa(sdl)
-	const struct sockaddr_dl *sdl;
-{
-	static char obuf[64];
-	char *out = obuf;
-	int i;
-	u_char *in = (u_char *)LLADDR(sdl);
-	u_char *inlim = in + sdl->sdl_alen;
-	int firsttime = 1;
-
-	if (sdl->sdl_nlen) {
-		bcopy(sdl->sdl_data, obuf, sdl->sdl_nlen);
-		out += sdl->sdl_nlen;
-		if (sdl->sdl_alen)
-			*out++ = ':';
-	}
-	while (in < inlim) {
-		if (firsttime)
-			firsttime = 0;
-		else
-			*out++ = '.';
-		i = *in++;
-		if (i > 0xf) {
-			out[1] = hexlist[i & 0xf];
-			i >>= 4;
-			out[0] = hexlist[i];
-			out += 2;
-		} else
-			*out++ = hexlist[i];
-	}
-	*out = 0;
-	return (obuf);
-}
diff --git a/newlib/libc/sys/linux/net/map_v4v6.c b/newlib/libc/sys/linux/net/map_v4v6.c
deleted file mode 100644
index f746a8088..000000000
--- a/newlib/libc/sys/linux/net/map_v4v6.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * ++Copyright++ 1985, 1988, 1993
- * -
- * Copyright (c) 1985, 1988, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)gethostnamadr.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <stdio.h>
-#include <string.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <ctype.h>
-#include <syslog.h>
-
-typedef union {
-	int32_t al;
-	char ac;
-} align;
-
-void
-_map_v4v6_address(src, dst)
-	const char *src;
-	char *dst;
-{
-	u_char *p = (u_char *)dst;
-	char tmp[INADDRSZ];
-	int i;
-
-	/* Stash a temporary copy so our caller can update in place. */
-	bcopy(src, tmp, INADDRSZ);
-	/* Mark this ipv6 addr as a mapped ipv4. */
-	for (i = 0; i < 10; i++)
-		*p++ = 0x00;
-	*p++ = 0xff;
-	*p++ = 0xff;
-	/* Retrieve the saved copy and we're done. */
-	bcopy(tmp, (void*)p, INADDRSZ);
-}
-
-void
-_map_v4v6_hostent(hp, bpp, lenp)
-	struct hostent *hp;
-	char **bpp;
-	int *lenp;
-{
-	char **ap;
-
-	if (hp->h_addrtype != AF_INET || hp->h_length != INADDRSZ)
-		return;
-	hp->h_addrtype = AF_INET6;
-	hp->h_length = IN6ADDRSZ;
-	for (ap = hp->h_addr_list; *ap; ap++) {
-		int i = sizeof(align) - ((u_long)*bpp % sizeof(align));
-
-		if (*lenp < (i + IN6ADDRSZ)) {
-			/* Out of memory.  Truncate address list here.  XXX */
-			*ap = NULL;
-			return;
-		}
-		*bpp += i;
-		*lenp -= i;
-		_map_v4v6_address(*ap, *bpp);
-		*ap = *bpp;
-		*bpp += IN6ADDRSZ;
-		*lenp -= IN6ADDRSZ;
-	}
-}
diff --git a/newlib/libc/sys/linux/net/name6.c b/newlib/libc/sys/linux/net/name6.c
deleted file mode 100644
index 80037e8f9..000000000
--- a/newlib/libc/sys/linux/net/name6.c
+++ /dev/null
@@ -1,1812 +0,0 @@
-/*	$KAME: name6.c,v 1.25 2000/06/26 16:44:40 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * ++Copyright++ 1985, 1988, 1993
- * -
- * Copyright (c) 1985, 1988, 1993
- *    The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * -
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- * -
- * --Copyright--
- */
-
-/*
- *	Atsushi Onoe <onoe@sm.sony.co.jp>
- */
-
-/*
- * TODO for thread safe
- *	use mutex for _hostconf, _hostconf_init.
- *	rewrite resolvers to be thread safe
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-#include <sys/types.h>
-#include <unistd.h>
-
-#include "namespace.h"
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/queue.h>
-#include <netinet/in.h>
-
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <errno.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#include <nsswitch.h>
-#include <unistd.h>
-#include "un-namespace.h"
-
-#ifndef _PATH_HOSTS
-#define	_PATH_HOSTS	"/etc/hosts"
-#endif
-
-#ifndef MAXALIASES
-#define	MAXALIASES	35
-#endif
-#ifndef	MAXADDRS
-#define	MAXADDRS	2
-#endif
-#ifndef MAXDNAME
-#define	MAXDNAME	1025
-#endif
-
-#ifdef INET6
-#define	ADDRLEN(af)	((af) == AF_INET6 ? sizeof(struct in6_addr) : \
-					    sizeof(struct in_addr))
-#else
-#define	ADDRLEN(af)	sizeof(struct in_addr)
-#endif
-
-#define	MAPADDR(ab, ina) \
-do {									\
-	memcpy(&(ab)->map_inaddr, ina, sizeof(struct in_addr));		\
-	memset((ab)->map_zero, 0, sizeof((ab)->map_zero));		\
-	memset((ab)->map_one, 0xff, sizeof((ab)->map_one));		\
-} while (0)
-#define	MAPADDRENABLED(flags) \
-	(((flags) & AI_V4MAPPED) || \
-	 (((flags) & AI_V4MAPPED_CFG) && _mapped_addr_enabled()))
-
-union inx_addr {
-	struct in_addr	in_addr;
-#ifdef INET6
-	struct in6_addr	in6_addr;
-#endif
-	struct {
-		u_char	mau_zero[10];
-		u_char	mau_one[2];
-		struct in_addr mau_inaddr;
-	}		map_addr_un;
-#define	map_zero	map_addr_un.mau_zero
-#define	map_one		map_addr_un.mau_one
-#define	map_inaddr	map_addr_un.mau_inaddr
-};
-
-u_int16_t _getshort(const u_char *src);
-
-static struct	 hostent *_hpcopy(struct hostent *hp, int *errp);
-static struct	 hostent *_hpaddr(int af, const char *name, void *addr, int *errp);
-static struct	 hostent *_hpmerge(struct hostent *hp1, struct hostent *hp2, int *errp);
-#ifdef INET6
-static struct	 hostent *_hpmapv6(struct hostent *hp, int *errp);
-#endif
-static struct	 hostent *_hpsort(struct hostent *hp);
-static struct	 hostent *_ghbyname(const char *name, int af, int flags, int *errp);
-static char	*_hgetword(char **pp);
-static int	 _mapped_addr_enabled(void);
-
-static FILE	*_files_open(int *errp);
-static int	 _files_ghbyname(void *, void *, va_list);
-static int	 _files_ghbyaddr(void *, void *, va_list);
-#if 0 // keep gcc happy
-static void	 _files_shent(int stayopen);
-static void	 _files_ehent(void);
-#endif
-#ifdef YP
-static int	 _nis_ghbyname(void *, void *, va_list);
-static int	 _nis_ghbyaddr(void *, void *, va_list);
-#endif
-static int	 _dns_ghbyname(void *, void *, va_list);
-static int	 _dns_ghbyaddr(void *, void *, va_list);
-#if 0 // keep gcc happy
-static void	 _dns_shent(int stayopen);
-static void	 _dns_ehent(void);
-#endif
-
-#ifdef ICMPNL
-static int	 _icmp_ghbyaddr(void *, void *, va_list);
-#endif /* ICMPNL */
-
-/* Host lookup order if nsswitch.conf is broken or nonexistant */
-static const ns_src default_src[] = { 
-	{ NSSRC_FILES, NS_SUCCESS },
-	{ NSSRC_DNS, NS_SUCCESS },
-#ifdef ICMPNL
-#define NSSRC_ICMP "icmp"
-	{ NSSRC_ICMP, NS_SUCCESS },
-#endif
-	{ 0 }
-};
-
-/*
- * Check if kernel supports mapped address.
- *	implementation dependent
- */
-#ifdef __KAME__
-#include <sys/sysctl.h>
-#endif /* __KAME__ */
-
-static int
-_mapped_addr_enabled(void)
-{
-	/* implementation dependent check */
-#if defined(__KAME__) && defined(IPV6CTL_MAPPED_ADDR)
-	int mib[4];
-	size_t len;
-	int val;
-
-	mib[0] = CTL_NET;
-	mib[1] = PF_INET6;
-	mib[2] = IPPROTO_IPV6;
-	mib[3] = IPV6CTL_MAPPED_ADDR;
-	len = sizeof(val);
-	if (__sysctl(mib, 4, &val, &len, 0, 0) == 0 && val != 0)
-		return 1;
-#endif /* __KAME__ && IPV6CTL_MAPPED_ADDR */
-	return 0;
-}
-
-/*
- * Functions defined in RFC2553
- *	getipnodebyname, getipnodebyaddr, freehostent
- */
-
-static struct hostent *
-_ghbyname(const char *name, int af, int flags, int *errp)
-{
-	struct hostent *hp;
-	int rval;
-	
-	static const ns_dtab dtab[] = {
-		NS_FILES_CB(_files_ghbyname, NULL)
-		{ NSSRC_DNS, _dns_ghbyname, NULL },
-		NS_NIS_CB(_nis_ghbyname, NULL)
-		{ 0 }
-	};
-
-	if (flags & AI_ADDRCONFIG) {
-		int s;
-
-		/*
-		 * TODO:
-		 * Note that implementation dependent test for address
-		 * configuration should be done everytime called
-		 * (or apropriate interval),
-		 * because addresses will be dynamically assigned or deleted.
-		 */
-		if (af == AF_UNSPEC) {
-			if ((s = socket(AF_INET6, SOCK_DGRAM, 0)) < 0)
-				af = AF_INET;
-			else {
-				close(s);
-				if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-					af = AF_INET6;
-				else
-				close(s);
-			}
-
-		}
-		if (af != AF_UNSPEC) {
-			if ((s = socket(af, SOCK_DGRAM, 0)) < 0)
-				return NULL;
-			close(s);
-		}
-	}
-
-	rval = nsdispatch(&hp, dtab, NSDB_HOSTS, "ghbyname", default_src,
-			  name, af, errp);
-	return (rval == NS_SUCCESS) ? hp : NULL;
-}
-
-/* getipnodebyname() internal routine for multiple query(PF_UNSPEC) support. */
-struct hostent *
-_getipnodebyname_multi(const char *name, int af, int flags, int *errp)
-{
-	struct hostent *hp;
-	union inx_addr addrbuf;
-
-	/* XXX: PF_UNSPEC is only supposed to be passed from getaddrinfo() */
-	if (af != AF_INET
-#ifdef INET6
-	    && af != AF_INET6
-#endif
-	    && af != PF_UNSPEC
-		)
-	{
-		*errp = NO_RECOVERY;
-		return NULL;
-	}
-
-#ifdef INET6
-	/* special case for literal address */
-	if (inet_pton(AF_INET6, name, &addrbuf) == 1) {
-		if (af != AF_INET6) {
-			*errp = HOST_NOT_FOUND;
-			return NULL;
-		}
-		return _hpaddr(af, name, &addrbuf, errp);
-	}
-#endif
-	if (inet_aton(name, (struct in_addr *)&addrbuf) == 1) {
-		if (af != AF_INET) {
-			if (MAPADDRENABLED(flags)) {
-				MAPADDR(&addrbuf, &addrbuf.in_addr);
-			} else {
-				*errp = HOST_NOT_FOUND;
-				return NULL;
-			}
-		}
-		return _hpaddr(af, name, &addrbuf, errp);
-	}
-
-	*errp = HOST_NOT_FOUND;
-	hp = _ghbyname(name, af, flags, errp);
-
-#ifdef INET6
-	if (af == AF_INET6
-	&&  ((flags & AI_ALL) || hp == NULL)
-	&&  (MAPADDRENABLED(flags))) {
-		struct hostent *hp2 = _ghbyname(name, AF_INET, flags, errp);
-		if (hp == NULL)
-			hp = _hpmapv6(hp2, errp);
-		else {
-			if (hp2 && strcmp(hp->h_name, hp2->h_name) != 0) {
-				freehostent(hp2);
-				hp2 = NULL;
-			}
-			hp = _hpmerge(hp, hp2, errp);
-		}
-	}
-#endif
-	return _hpsort(hp);
-}
-
-struct hostent *
-getipnodebyname(const char *name, int af, int flags, int *errp)
-{
-	if (af != AF_INET
-#ifdef INET6
-	    && af != AF_INET6
-#endif
-		)
-	{
-		*errp = NO_RECOVERY;
-		return NULL;
-	}
-	return(_getipnodebyname_multi(name, af ,flags, errp));
-}
-
-struct hostent *
-getipnodebyaddr(const void *src, size_t len, int af, int *errp)
-{
-	struct hostent *hp;
-	int rval;
-#ifdef INET6
-	struct in6_addr addrbuf;
-#else
-	struct in_addr addrbuf;
-#endif
-
-	static const ns_dtab dtab[] = {
-		NS_FILES_CB(_files_ghbyaddr, NULL)
-		{ NSSRC_DNS, _dns_ghbyaddr, NULL },
-		NS_NIS_CB(_nis_ghbyaddr, NULL)
-#ifdef ICMPNL
-		{ NSSRC_ICMP, _icmp_ghbyaddr, NULL },
-#endif
-		{ 0 }
-	};
-
-	*errp = HOST_NOT_FOUND;
-
-	switch (af) {
-	case AF_INET:
-		if (len != sizeof(struct in_addr)) {
-			*errp = NO_RECOVERY;
-			return NULL;
-		}
-		if ((long)src & ~(sizeof(struct in_addr) - 1)) {
-			memcpy(&addrbuf, src, len);
-			src = &addrbuf;
-		}
-		if (((struct in_addr *)src)->s_addr == 0)
-			return NULL;
-		break;
-#ifdef INET6
-	case AF_INET6:
-		if (len != sizeof(struct in6_addr)) {
-			*errp = NO_RECOVERY;
-			return NULL;
-		}
-		if ((long)src & ~(sizeof(struct in6_addr) / 2 - 1)) {	/*XXX*/
-			memcpy(&addrbuf, src, len);
-			src = &addrbuf;
-		}
-		if (IN6_IS_ADDR_UNSPECIFIED((struct in6_addr *)src))
-			return NULL;
-		if (IN6_IS_ADDR_V4MAPPED((struct in6_addr *)src)
-		||  IN6_IS_ADDR_V4COMPAT((struct in6_addr *)src)) {
-			src = (char *)src +
-			    (sizeof(struct in6_addr) - sizeof(struct in_addr));
-			af = AF_INET;
-			len = sizeof(struct in_addr);
-		}
-		break;
-#endif
-	default:
-		*errp = NO_RECOVERY;
-		return NULL;
-	}
-
-	rval = nsdispatch(&hp, dtab, NSDB_HOSTS, "ghbyaddr", default_src,
-			  src, len, af, errp);
-	return (rval == NS_SUCCESS) ? hp : NULL;
-}
-
-void
-freehostent(struct hostent *ptr)
-{
-	free(ptr);
-}
-
-#if 0
-
-/* XXX: should be deprecated */
-struct hostent *
-getnodebyname(const char *name, int af, int flags)
-{
-	return getipnodebyname(name, af, flags, &h_errno);
-}
-
-#ifdef __warn_references
-__warn_references(getnodebyname,
-	"warning: getnodebyname() deprecated, "
-	"should use getaddrinfo() or getipnodebyname()");
-#endif
-
-struct hostent *
-getnodebyaddr(const void *src, size_t len, int af)
-{
-	return getipnodebyaddr(src, len, af, &h_errno);
-}
-
-#ifdef __warn_references
-__warn_references(getnodebyaddr,
-	"warning: getnodebyaddr() deprecated, "
-	"should use getnameinfo() or getipnodebyaddr()");
-#endif
-
-#endif
-
-/*
- * Private utility functions
- */
-
-/*
- * _hpcopy: allocate and copy hostent structure
- */
-static struct hostent *
-_hpcopy(struct hostent *hp, int *errp)
-{
-	struct hostent *nhp;
-	char *cp, **pp;
-	int size, addrsize;
-	int nalias = 0, naddr = 0;
-	int al_off;
-	int i;
-
-	if (hp == NULL)
-		return hp;
-
-	/* count size to be allocated */
-	size = sizeof(struct hostent);
-	if (hp->h_name != NULL)
-		size += strlen(hp->h_name) + 1;
-	if ((pp = hp->h_aliases) != NULL) {
-		for (i = 0; *pp != NULL; i++, pp++) {
-			if (**pp != '\0') {
-				size += strlen(*pp) + 1;
-				nalias++;
-			}
-		}
-	}
-	/* adjust alignment */
-#ifdef	ALIGN
-	size = ALIGN(size);
-#endif
-	al_off = size;
-	size += sizeof(char *) * (nalias + 1);
-#ifdef ALIGN
-	addrsize = ALIGN(hp->h_length);
-#else
-	addrsize = hp->h_length;
-#endif
-        
-	if ((pp = hp->h_addr_list) != NULL) {
-		while (*pp++ != NULL)
-			naddr++;
-	}
-	size += addrsize * naddr;
-	size += sizeof(char *) * (naddr + 1);
-
-	/* copy */
-	if ((nhp = (struct hostent *)malloc(size)) == NULL) {
-		*errp = TRY_AGAIN;
-		return NULL;
-	}
-	cp = (char *)&nhp[1];
-	if (hp->h_name != NULL) {
-		nhp->h_name = cp;
-		strcpy(cp, hp->h_name);
-		cp += strlen(cp) + 1;
-	} else
-		nhp->h_name = NULL;
-	nhp->h_aliases = (char **)((char *)nhp + al_off);
-	if ((pp = hp->h_aliases) != NULL) {
-		for (i = 0; *pp != NULL; pp++) {
-			if (**pp != '\0') {
-				nhp->h_aliases[i++] = cp;
-				strcpy(cp, *pp);
-				cp += strlen(cp) + 1;
-			}
-		}
-	}
-	nhp->h_aliases[nalias] = NULL;
-	cp = (char *)&nhp->h_aliases[nalias + 1];
-	nhp->h_addrtype = hp->h_addrtype;
-	nhp->h_length = hp->h_length;
-	nhp->h_addr_list = (char **)cp;
-	if ((pp = hp->h_addr_list) != NULL) {
-		cp = (char *)&nhp->h_addr_list[naddr + 1];
-		for (i = 0; *pp != NULL; pp++) {
-			nhp->h_addr_list[i++] = cp;
-			memcpy(cp, *pp, hp->h_length);
-			cp += addrsize;
-		}
-	}
-	nhp->h_addr_list[naddr] = NULL;
-	return nhp;
-}
-
-/*
- * _hpaddr: construct hostent structure with one address
- */
-static struct hostent *
-_hpaddr(int af, const char *name, void *addr, int *errp)
-{
-	struct hostent *hp, hpbuf;
-	char *addrs[2];
-
-	hp = &hpbuf;
-	hp->h_name = (char *)name;
-	hp->h_aliases = NULL;
-	hp->h_addrtype = af;
-	hp->h_length = ADDRLEN(af);
-	hp->h_addr_list = addrs;
-	addrs[0] = (char *)addr;
-	addrs[1] = NULL;
-	return _hpcopy(hp, errp);
-}
-
-/*
- * _hpmerge: merge 2 hostent structure, arguments will be freed
- */
-static struct hostent *
-_hpmerge(struct hostent *hp1, struct hostent *hp2, int *errp)
-{
-	int i, j;
-	int naddr, nalias;
-	char **pp;
-	struct hostent *hp, hpbuf;
-	char *aliases[MAXALIASES + 1], *addrs[MAXADDRS + 1];
-	union inx_addr addrbuf[MAXADDRS];
-
-	if (hp1 == NULL)
-		return hp2;
-	if (hp2 == NULL)
-		return hp1;
-
-#define	HP(i)	(i == 1 ? hp1 : hp2)
-	hp = &hpbuf;
-	hp->h_name = (hp1->h_name != NULL ? hp1->h_name : hp2->h_name);
-	hp->h_aliases = aliases;
-	nalias = 0;
-	for (i = 1; i <= 2; i++) {
-		if ((pp = HP(i)->h_aliases) == NULL)
-			continue;
-		for (; nalias < MAXALIASES && *pp != NULL; pp++) {
-			/* check duplicates */
-			for (j = 0; j < nalias; j++)
-				if (strcasecmp(*pp, aliases[j]) == 0)
-					break;
-			if (j == nalias)
-				aliases[nalias++] = *pp;
-		}
-	}
-	aliases[nalias] = NULL;
-#ifdef INET6
-	if (hp1->h_length != hp2->h_length) {
-		hp->h_addrtype = AF_INET6;
-		hp->h_length = sizeof(struct in6_addr);
-	} else {
-#endif
-		hp->h_addrtype = hp1->h_addrtype;
-		hp->h_length = hp1->h_length;
-#ifdef INET6
-	}
-#endif
-	hp->h_addr_list = addrs;
-	naddr = 0;
-	for (i = 1; i <= 2; i++) {
-		if ((pp = HP(i)->h_addr_list) == NULL)
-			continue;
-		if (HP(i)->h_length == hp->h_length) {
-			while (naddr < MAXADDRS && *pp != NULL)
-				addrs[naddr++] = *pp++;
-		} else {
-			/* copy IPv4 addr as mapped IPv6 addr */
-			while (naddr < MAXADDRS && *pp != NULL) {
-				MAPADDR(&addrbuf[naddr], *pp++);
-				addrs[naddr] = (char *)&addrbuf[naddr];
-				naddr++;
-			}
-		}
-	}
-	addrs[naddr] = NULL;
-	hp = _hpcopy(hp, errp);
-	freehostent(hp1);
-	freehostent(hp2);
-	return hp;
-}
-
-/*
- * _hpmapv6: convert IPv4 hostent into IPv4-mapped IPv6 addresses
- */
-#ifdef INET6
-static struct hostent *
-_hpmapv6(struct hostent *hp, int *errp)
-{
-	struct hostent *hp6;
-
-	if (hp == NULL)
-		return NULL;
-	if (hp->h_addrtype == AF_INET6)
-		return hp;
-
-	/* make dummy hostent to convert IPv6 address */
-	if ((hp6 = (struct hostent *)malloc(sizeof(struct hostent))) == NULL) {
-		*errp = TRY_AGAIN;
-		return NULL;
-	}
-	hp6->h_name = NULL;
-	hp6->h_aliases = NULL;
-	hp6->h_addrtype = AF_INET6;
-	hp6->h_length = sizeof(struct in6_addr);
-	hp6->h_addr_list = NULL;
-	return _hpmerge(hp6, hp, errp);
-}
-#endif
-
-/*
- * _hpsort: sort address by sortlist
- */
-static struct hostent *
-_hpsort(struct hostent *hp)
-{
-	int i, j, n;
-	u_char *ap, *sp, *mp, **pp;
-	char t;
-	char order[MAXADDRS];
-	int nsort = _res.nsort;
-
-	if (hp == NULL || hp->h_addr_list[1] == NULL || nsort == 0)
-		return hp;
-	for (i = 0; (ap = (u_char *)hp->h_addr_list[i]); i++) {
-		for (j = 0; j < nsort; j++) {
-#ifdef INET6
-			if (_res_ext.sort_list[j].af != hp->h_addrtype)
-				continue;
-			sp = (u_char *)&_res_ext.sort_list[j].addr;
-			mp = (u_char *)&_res_ext.sort_list[j].mask;
-#else
-			sp = (u_char *)&_res.sort_list[j].addr;
-			mp = (u_char *)&_res.sort_list[j].mask;
-#endif
-			for (n = 0; n < hp->h_length; n++) {
-				if ((ap[n] & mp[n]) != sp[n])
-					break;
-			}
-			if (n == hp->h_length)
-				break;
-		}
-		order[i] = j;
-	}
-	n = i;
-	pp = (u_char **)hp->h_addr_list;
-	for (i = 0; i < n - 1; i++) {
-		for (j = i + 1; j < n; j++) {
-			if (order[i] > order[j]) {
-				ap = pp[i];
-				pp[i] = pp[j];
-				pp[j] = ap;
-				t = order[i];
-				order[i] = order[j];
-				order[j] = t;
-			}
-		}
-	}
-	return hp;
-}
-
-static char *
-_hgetword(char **pp)
-{
-	char c, *p, *ret;
-	const char *sp;
-	static const char sep[] = "# \t\n";
-
-	ret = NULL;
-	for (p = *pp; (c = *p) != '\0'; p++) {
-		for (sp = sep; *sp != '\0'; sp++) {
-			if (c == *sp)
-				break;
-		}
-		if (c == '#')
-			p[1] = '\0';	/* ignore rest of line */
-		if (ret == NULL) {
-			if (*sp == '\0')
-				ret = p;
-		} else {
-			if (*sp != '\0') {
-				*p++ = '\0';
-				break;
-			}
-		}
-	}
-	*pp = p;
-	if (ret == NULL || *ret == '\0')
-		return NULL;
-	return ret;
-}
-
-/*
- * FILES (/etc/hosts)
- */
-
-static FILE *
-_files_open(int *errp)
-{
-	FILE *fp;
-	fp = fopen(_PATH_HOSTS, "r");
-	if (fp == NULL)
-		*errp = NO_RECOVERY;
-	return fp;
-}
-
-static int
-_files_ghbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *name;
-	int af; 
-	int *errp;
-	int match, nalias;
-	char *p, *line, *addrstr, *cname;
-	FILE *fp;
-	struct hostent *rethp, *hp, hpbuf;
-	char *aliases[MAXALIASES + 1], *addrs[2];
-	union inx_addr addrbuf;
-	char buf[BUFSIZ];
-	int af0;
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-	errp = va_arg(ap, int *);
-
-	*(struct hostent **)rval = NULL;
-
-	if ((fp = _files_open(errp)) == NULL)
-		return NS_UNAVAIL;
-	rethp = hp = NULL;
-
-	af0 = af;
-	while (fgets(buf, sizeof(buf), fp)) {
-		line = buf;
-		if ((addrstr = _hgetword(&line)) == NULL
-		||  (cname = _hgetword(&line)) == NULL)
-			continue;
-		match = (strcasecmp(cname, name) == 0);
-		nalias = 0;
-		while ((p = _hgetword(&line)) != NULL) {
-			if (!match)
-				match = (strcasecmp(p, name) == 0);
-			if (nalias < MAXALIASES)
-				aliases[nalias++] = p;
-		}
-		if (!match)
-			continue;
-		switch (af0) {
-		case AF_INET:
-			if (inet_aton(addrstr, (struct in_addr *)&addrbuf)
-			    != 1) {
-				*errp = NO_DATA;	/* name found */
-				continue;
-			}
-			af = af0;
-			break;
-#ifdef INET6
-		case AF_INET6:
-			if (inet_pton(af, addrstr, &addrbuf) != 1) {
-				*errp = NO_DATA;	/* name found */
-				continue;
-			}
-			af = af0;
-			break;
-#endif
-		case AF_UNSPEC:
-			if (inet_aton(addrstr, (struct in_addr *)&addrbuf)
-			    == 1) {
-				af = AF_INET;
-				break;
-			}
-#ifdef INET6
-			if (inet_pton(AF_INET6, addrstr, &addrbuf) == 1) {
-				af = AF_INET6;
-				break; 
-			}
-#endif
-			*errp = NO_DATA;	/* name found */
-			continue;
-			/* NOTREACHED */
-		}
-		hp = &hpbuf;
-		hp->h_name = cname;
-		hp->h_aliases = aliases;
-		aliases[nalias] = NULL;
-		hp->h_addrtype = af;
-		hp->h_length = ADDRLEN(af);
-		hp->h_addr_list = addrs;
-		addrs[0] = (char *)&addrbuf;
-		addrs[1] = NULL;
-		hp = _hpcopy(hp, errp);
-		rethp = _hpmerge(rethp, hp, errp);
-	}
-	fclose(fp);
-	*(struct hostent **)rval = rethp;
-	return (rethp != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-static int
-_files_ghbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	const void *addr; 
-	int addrlen; 
-	int af; 
-	int *errp;
-	int nalias;
-	char *p, *line;
-	FILE *fp;
-	struct hostent *hp, hpbuf;
-	char *aliases[MAXALIASES + 1], *addrs[2];
-	union inx_addr addrbuf;
-	char buf[BUFSIZ];
-
-	addr = va_arg(ap, const void *);
-	addrlen = va_arg(ap, int);
-	af = va_arg(ap, int);
-	errp = va_arg(ap, int *);
-
-	*(struct hostent**)rval = NULL;
-
-	if ((fp = _files_open(errp)) == NULL)
-		return NS_UNAVAIL;
-	hp = NULL;
-	while (fgets(buf, sizeof(buf), fp)) {
-		line = buf;
-		if ((p = _hgetword(&line)) == NULL
-		||  (af == AF_INET
-		     ? inet_aton(p, (struct in_addr *)&addrbuf)
-		     : inet_pton(af, p, &addrbuf)) != 1
-		||  memcmp(addr, &addrbuf, addrlen) != 0
-		||  (p = _hgetword(&line)) == NULL)
-			continue;
-		hp = &hpbuf;
-		hp->h_name = p;
-		hp->h_aliases = aliases;
-		nalias = 0;
-		while ((p = _hgetword(&line)) != NULL) {
-			if (nalias < MAXALIASES)
-				aliases[nalias++] = p;
-		}
-		aliases[nalias] = NULL;
-		hp->h_addrtype = af;
-		hp->h_length = addrlen;
-		hp->h_addr_list = addrs;
-		addrs[0] = (char *)&addrbuf;
-		addrs[1] = NULL;
-		hp = _hpcopy(hp, errp);
-		break;
-	}
-	fclose(fp);
-	*(struct hostent **)rval = hp;
-	return (hp != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-#ifdef YP
-/*
- * NIS
- *
- * XXX actually a hack, these are INET4 specific.
- */
-static int
-_nis_ghbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *name;
-	int af;
-	int *errp;
-	struct hostent *hp = NULL;
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-	errp = va_arg(ap, int *);
-	
-	if (af == AF_UNSPEC)
-		af = AF_INET;
-	if (af == AF_INET) {
-		hp = _gethostbynisname(name, af);
-		if (hp != NULL)
-			hp = _hpcopy(hp, errp);
-	}
-	
-	*(struct hostent **)rval = hp;
-	return (hp != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-	
-}
-
-static int
-_nis_ghbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	const void *addr;
-	int addrlen;
-	int af;
-	int *errp;
-	struct hostent *hp = NULL;
-
-	addr = va_arg(ap, const void *);
-	addrlen = va_arg(ap, int);
-	af = va_arg(ap, int);
-
-	if (af == AF_INET) {
-		hp = _gethostbynisaddr(addr, addrlen, af);
-		if (hp != NULL)
-			hp = _hpcopy(hp, errp);
-	}
-	*(struct hostent **)rval = hp;
-	return (hp != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-#endif
-typedef struct __res_type_list res_type_list;
-
-struct __res_type_list {
-        res_type_list * rtl_entry;
-        int     rtl_type;
-};
-
-#if PACKETSZ > 1024
-#define	MAXPACKET	PACKETSZ
-#else
-#define	MAXPACKET	1024
-#endif
-
-typedef union {
-	HEADER hdr;
-	u_char buf[MAXPACKET];
-} querybuf;
-
-static struct hostent *getanswer(const querybuf *, int, const char *, int,
-	    struct hostent *, int *);
-
-/*
- * we don't need to take care about sorting, nor IPv4 mapped address here.
- */
-static struct hostent *
-getanswer(answer, anslen, qname, qtype, template, errp)
-	const querybuf *answer;
-	int anslen;
-	const char *qname;
-	int qtype;
-	struct hostent *template;
-	int *errp;
-{
-	const HEADER *hp;
-	const u_char *cp;
-	int n;
-	const u_char *eom, *erdata;
-	char *bp, **ap, **hap;
-	int type, class, buflen, ancount, qdcount;
-	int haveanswer, had_error;
-	char tbuf[MAXDNAME];
-	const char *tname;
-	int (*name_ok)(const char *);
-	static char *h_addr_ptrs[MAXADDRS + 1];
-	static char *host_aliases[MAXALIASES];
-	static char hostbuf[8*1024];
-
-#define BOUNDED_INCR(x) \
-	do { \
-		cp += x; \
-		if (cp > eom) { \
-			*errp = NO_RECOVERY; \
-			return (NULL); \
-		} \
-	} while (0)
-
-#define BOUNDS_CHECK(ptr, count) \
-	do { \
-		if ((ptr) + (count) > eom) { \
-			*errp = NO_RECOVERY; \
-			return (NULL); \
-		} \
-	} while (0)
-
-/* XXX do {} while (0) cannot be put here */
-#define DNS_ASSERT(x) \
-	{				\
-		if (!(x)) {		\
-			cp += n;	\
-			continue;	\
-		}			\
-	}
-
-/* XXX do {} while (0) cannot be put here */
-#define DNS_FATAL(x) \
-	{				\
-		if (!(x)) {		\
-			had_error++;	\
-			continue;	\
-		}			\
-	}
-
-	tname = qname;
-	template->h_name = NULL;
-	eom = answer->buf + anslen;
-	switch (qtype) {
-	case T_A:
-	case T_AAAA:
-		name_ok = res_hnok;
-		break;
-	case T_PTR:
-		name_ok = res_dnok;
-		break;
-	default:
-		return (NULL);	/* XXX should be abort(); */
-	}
-	/*
-	 * find first satisfactory answer
-	 */
-	hp = &answer->hdr;
-	ancount = ntohs(hp->ancount);
-	qdcount = ntohs(hp->qdcount);
-	bp = hostbuf;
-	buflen = sizeof hostbuf;
-	cp = answer->buf;
-	BOUNDED_INCR(HFIXEDSZ);
-	if (qdcount != 1) {
-		*errp = NO_RECOVERY;
-		return (NULL);
-	}
-	n = dn_expand(answer->buf, eom, cp, bp, buflen);
-	if ((n < 0) || !(*name_ok)(bp)) {
-		*errp = NO_RECOVERY;
-		return (NULL);
-	}
-	BOUNDED_INCR(n + QFIXEDSZ);
-	if (qtype == T_A || qtype == T_AAAA) {
-		/* res_send() has already verified that the query name is the
-		 * same as the one we sent; this just gets the expanded name
-		 * (i.e., with the succeeding search-domain tacked on).
-		 */
-		n = strlen(bp) + 1;		/* for the \0 */
-		if (n >= MAXHOSTNAMELEN) {
-			*errp = NO_RECOVERY;
-			return (NULL);
-		}
-		template->h_name = bp;
-		bp += n;
-		buflen -= n;
-		/* The qname can be abbreviated, but h_name is now absolute. */
-		qname = template->h_name;
-	}
-	ap = host_aliases;
-	*ap = NULL;
-	template->h_aliases = host_aliases;
-	hap = h_addr_ptrs;
-	*hap = NULL;
-	template->h_addr_list = h_addr_ptrs;
-	haveanswer = 0;
-	had_error = 0;
-	while (ancount-- > 0 && cp < eom && !had_error) {
-		n = dn_expand(answer->buf, eom, cp, bp, buflen);
-		DNS_FATAL(n >= 0);
-		DNS_FATAL((*name_ok)(bp));
-		cp += n;			/* name */
-		BOUNDS_CHECK(cp, 3 * INT16SZ + INT32SZ);
-		type = _getshort(cp);
- 		cp += INT16SZ;			/* type */
-		class = _getshort(cp);
- 		cp += INT16SZ + INT32SZ;	/* class, TTL */
-		n = _getshort(cp);
-		cp += INT16SZ;			/* len */
-		BOUNDS_CHECK(cp, n);
-		erdata = cp + n;
-		DNS_ASSERT(class == C_IN);
-		if ((qtype == T_A || qtype == T_AAAA) && type == T_CNAME) {
-			if (ap >= &host_aliases[MAXALIASES-1])
-				continue;
-			n = dn_expand(answer->buf, eom, cp, tbuf, sizeof tbuf);
-			DNS_FATAL(n >= 0);
-			DNS_FATAL((*name_ok)(tbuf));
-			cp += n;
-			if (cp != erdata) {
-				*errp = NO_RECOVERY;
-				return (NULL);
-			}
-			/* Store alias. */
-			*ap++ = bp;
-			n = strlen(bp) + 1;	/* for the \0 */
-			DNS_FATAL(n < MAXHOSTNAMELEN);
-			bp += n;
-			buflen -= n;
-			/* Get canonical name. */
-			n = strlen(tbuf) + 1;	/* for the \0 */
-			DNS_FATAL(n <= buflen);
-			DNS_FATAL(n < MAXHOSTNAMELEN);
-			strcpy(bp, tbuf);
-			template->h_name = bp;
-			bp += n;
-			buflen -= n;
-			continue;
-		}
-		if (qtype == T_PTR && type == T_CNAME) {
-			n = dn_expand(answer->buf, eom, cp, tbuf, sizeof tbuf);
-			if (n < 0 || !res_dnok(tbuf)) {
-				had_error++;
-				continue;
-			}
-			cp += n;
-			if (cp != erdata) {
-				*errp = NO_RECOVERY;
-				return (NULL);
-			}
-			/* Get canonical name. */
-			n = strlen(tbuf) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN) {
-				had_error++;
-				continue;
-			}
-			strcpy(bp, tbuf);
-			tname = bp;
-			bp += n;
-			buflen -= n;
-			continue;
-		}
-		DNS_ASSERT(type == qtype);
-		switch (type) {
-		case T_PTR:
-			DNS_ASSERT(strcasecmp(tname, bp) == 0);
-			n = dn_expand(answer->buf, eom, cp, bp, buflen);
-			DNS_FATAL(n >= 0);
-			DNS_FATAL(res_hnok(bp));
-#if MULTI_PTRS_ARE_ALIASES
-			cp += n;
-			if (cp != erdata) {
-				*errp = NO_RECOVERY;
-				return (NULL);
-			}
-			if (!haveanswer)
-				template->h_name = bp;
-			else if (ap < &host_aliases[MAXALIASES-1])
-				*ap++ = bp;
-			else
-				n = -1;
-			if (n != -1) {
-				n = strlen(bp) + 1;	/* for the \0 */
-				if (n >= MAXHOSTNAMELEN) {
-					had_error++;
-					break;
-				}
-				bp += n;
-				buflen -= n;
-			}
-			break;
-#else
-			template->h_name = bp;
-			*errp = NETDB_SUCCESS;
-			return (template);
-#endif
-		case T_A:
-		case T_AAAA:
-			DNS_ASSERT(strcasecmp(template->h_name, bp) == 0);
-			DNS_ASSERT(n == template->h_length);
-			if (!haveanswer) {
-				int nn;
-
-				template->h_name = bp;
-				nn = strlen(bp) + 1;	/* for the \0 */
-				bp += nn;
-				buflen -= nn;
-			}
-#ifdef ALIGN
-			bp = (char *)ALIGN(bp);
-#else
-			bp = (char *)(bp);
-#endif
-
-			DNS_FATAL(bp + n < &hostbuf[sizeof hostbuf]);
-			DNS_ASSERT(hap < &h_addr_ptrs[MAXADDRS-1]);
-#ifdef FILTER_V4MAPPED
-			if (type == T_AAAA) {
-				struct in6_addr in6;
-				memcpy(&in6, cp, sizeof(in6));
-				DNS_ASSERT(IN6_IS_ADDR_V4MAPPED(&in6) == 0);
-			}
-#endif
-			bcopy(cp, *hap++ = bp, n);
-			bp += n;
-			buflen -= n;
-			cp += n;
-			if (cp != erdata) {
-				*errp = NO_RECOVERY;
-				return (NULL);
-			}
-			break;
-		default:
-			abort();
-		}
-		if (!had_error)
-			haveanswer++;
-	}
-	if (haveanswer) {
-		*ap = NULL;
-		*hap = NULL;
-		if (!template->h_name) {
-			n = strlen(qname) + 1;	/* for the \0 */
-			if (n > buflen || n >= MAXHOSTNAMELEN)
-				goto no_recovery;
-			strcpy(bp, qname);
-			template->h_name = bp;
-			bp += n;
-			buflen -= n;
-		}
-		*errp = NETDB_SUCCESS;
-		return (template);
-	}
- no_recovery:
-	*errp = NO_RECOVERY;
-	return (NULL);
-
-#undef BOUNDED_INCR
-#undef BOUNDS_CHECK
-#undef DNS_ASSERT
-#undef DNS_FATAL
-}
-
-/* res_search() variant with multiple query support. */
-static struct hostent *
-_res_search_multi(name, rtl, errp)
-	const char *name;	/* domain name */
-	struct	__res_type_list *rtl; /* list of query types */
-	int *errp;
-{
-	const char *cp, * const *domain;
-	struct hostent *hp0 = NULL, *hp;
-	struct hostent hpbuf;
-	u_int dots;
-	int trailing_dot, ret, saved_herrno;
-	int got_nodata = 0, got_servfail = 0, tried_as_is = 0;
-	struct __res_type_list *rtl0 = rtl;
-	querybuf buf;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		*errp = NETDB_INTERNAL;
-		return (NULL);
-	}
-	dots = 0;
-	for (cp = name; *cp; cp++)
-		dots += (*cp == '.');
-	trailing_dot = 0;
-	if (cp > name && *--cp == '.')
-		trailing_dot++;
-
-	/* If there aren't any dots, it could be a user-level alias */
-	if (!dots && (cp = hostalias(name)) != NULL) {
-		for(rtl = rtl0; rtl != NULL;
-		    rtl = rtl->rtl_entry) {
-			ret = res_query(cp, C_IN, rtl->rtl_type, buf.buf,
-					     sizeof(buf.buf));
-			if (ret > 0) {
-				hpbuf.h_addrtype = (rtl->rtl_type == T_AAAA)
-				    ? AF_INET6 : AF_INET;
-				hpbuf.h_length = ADDRLEN(hpbuf.h_addrtype);
-				hp = getanswer(&buf, ret, name, rtl->rtl_type,
-						    &hpbuf, errp);
-				if (!hp)
-					continue;
-				hp = _hpcopy(&hpbuf, errp);
-				hp0 = _hpmerge(hp0, hp, errp);
-			}
-		}
-		return (hp0);
-	}
-
-	/*
-	 * If there are dots in the name already, let's just give it a try
-	 * 'as is'.  The threshold can be set with the "ndots" option.
-	 */
-	saved_herrno = -1;
-	if (dots >= _res.ndots) {
-		for(rtl = rtl0; rtl != NULL;
-		    rtl = rtl->rtl_entry) {
-			ret = res_querydomain(name, NULL, C_IN, rtl->rtl_type,
-					      buf.buf, sizeof(buf.buf));
-			if (ret > 0) {
-				hpbuf.h_addrtype = (rtl->rtl_type == T_AAAA)
-				    ? AF_INET6 : AF_INET;
-				hpbuf.h_length = ADDRLEN(hpbuf.h_addrtype);
-				hp = getanswer(&buf, ret, name, rtl->rtl_type,
-						    &hpbuf, errp);
-				if (!hp)
-					continue;
-				hp = _hpcopy(&hpbuf, errp);
-				hp0 = _hpmerge(hp0, hp, errp);
-			}
-		}
-		if (hp0 != NULL)
-			return (hp0);
-		saved_herrno = *errp;
-		tried_as_is++;
-	}
-
-	/*
-	 * We do at least one level of search if
-	 *	- there is no dot and RES_DEFNAME is set, or
-	 *	- there is at least one dot, there is no trailing dot,
-	 *	  and RES_DNSRCH is set.
-	 */
-	if ((!dots && (_res.options & RES_DEFNAMES)) ||
-	    (dots && !trailing_dot && (_res.options & RES_DNSRCH))) {
-		int done = 0;
-
-		for (domain = (const char * const *)_res.dnsrch;
-		     *domain && !done;
-		     domain++) {
-
-			for(rtl = rtl0; rtl != NULL;
-			    rtl = rtl->rtl_entry) {
-				ret = res_querydomain(name, *domain, C_IN,
-						      rtl->rtl_type,
-						      buf.buf, sizeof(buf.buf));
-				if (ret > 0) {
-					hpbuf.h_addrtype = (rtl->rtl_type == T_AAAA)
-					    ? AF_INET6 : AF_INET;
-					hpbuf.h_length = ADDRLEN(hpbuf.h_addrtype);
-					hp = getanswer(&buf, ret, name,
-					    rtl->rtl_type, &hpbuf, errp);
-					if (!hp)
-						continue;
-					hp = _hpcopy(&hpbuf, errp);
-					hp0 = _hpmerge(hp0, hp, errp);
-				}
-			}
-			if (hp0 != NULL)
-				return (hp0);
-
-			/*
-			 * If no server present, give up.
-			 * If name isn't found in this domain,
-			 * keep trying higher domains in the search list
-			 * (if that's enabled).
-			 * On a NO_DATA error, keep trying, otherwise
-			 * a wildcard entry of another type could keep us
-			 * from finding this entry higher in the domain.
-			 * If we get some other error (negative answer or
-			 * server failure), then stop searching up,
-			 * but try the input name below in case it's
-			 * fully-qualified.
-			 */
-			if (errno == ECONNREFUSED) {
-				*errp = TRY_AGAIN;
-				return (NULL);
-			}
-
-			switch (*errp) {
-			case NO_DATA:
-				got_nodata++;
-				/* FALLTHROUGH */
-			case HOST_NOT_FOUND:
-				/* keep trying */
-				break;
-			case TRY_AGAIN:
-				if (buf.hdr.rcode == SERVFAIL) {
-					/* try next search element, if any */
-					got_servfail++;
-					break;
-				}
-				/* FALLTHROUGH */
-			default:
-				/* anything else implies that we're done */
-				done++;
-			}
-
-			/* if we got here for some reason other than DNSRCH,
-			 * we only wanted one iteration of the loop, so stop.
-			 */
-			if (!(_res.options & RES_DNSRCH))
-				done++;
-		}
-	}
-
-	/*
-	 * If we have not already tried the name "as is", do that now.
-	 * note that we do this regardless of how many dots were in the
-	 * name or whether it ends with a dot unless NOTLDQUERY is set.
-	 */
-	if (!tried_as_is && (dots || !(_res.options & RES_NOTLDQUERY))) {
-		for(rtl = rtl0; rtl != NULL;
-		    rtl = rtl->rtl_entry) {
-			ret = res_querydomain(name, NULL, C_IN, rtl->rtl_type,
-					      buf.buf, sizeof(buf.buf));
-			if (ret > 0) {
-				hpbuf.h_addrtype = (rtl->rtl_type == T_AAAA)
-				    ? AF_INET6 : AF_INET;
-				hpbuf.h_length = ADDRLEN(hpbuf.h_addrtype);
-				hp = getanswer(&buf, ret, name, rtl->rtl_type,
-				    &hpbuf, errp);
-				if (!hp)
-					continue;
-				hp = _hpcopy(&hpbuf, errp);
-				hp0 = _hpmerge(hp0, hp, errp);
-			}
-		}
-		if (hp0 != NULL)
-			return (hp0);
-	}
-
-	/* if we got here, we didn't satisfy the search.
-	 * if we did an initial full query, return that query's h_errno
-	 * (note that we wouldn't be here if that query had succeeded).
-	 * else if we ever got a nodata, send that back as the reason.
-	 * else send back meaningless h_errno, that being the one from
-	 * the last DNSRCH we did.
-	 */
-	if (saved_herrno != -1)
-		*errp = saved_herrno;
-	else if (got_nodata)
-		*errp = NO_DATA;
-	else if (got_servfail)
-		*errp = TRY_AGAIN;
-	return (NULL);
-}
-
-static int
-_dns_ghbyname(void *rval, void *cb_data, va_list ap)
-{
-	const char *name;
-	int af;
-	int *errp;
-	res_type_list *rtl, rtl4;
-#ifdef INET6
-	res_type_list rtl6;
-#endif
-
-	name = va_arg(ap, const char *);
-	af = va_arg(ap, int);
-	errp = va_arg(ap, int *);
-
-#ifdef INET6
-	switch (af) {
-	case AF_UNSPEC:
-		&rtl4->rtl_entry = NULL; rtl4.rtl_type = T_A;
-		&rtl6->rtl_entry = &rtl4; rtl6.rtl_type = T_AAAA;
-		rtl = &rtl6;
-		break;
-	case AF_INET6:
-		&rtl6->rtl_entry = NULL; rtl6.rtl_type = T_AAAA;
-		rtl = &rtl6;
-		break;
-	case AF_INET:
-		&rtl4->rtl_entry = NULL; rtl4.rtl_type = T_A;
-		rtl = &rtl4;
-		break;
-	}
-#else
-	(&rtl4)->rtl_entry = NULL;
-        rtl4.rtl_type = T_A;
-	rtl = &rtl4;
-#endif
-	*(struct hostent **)rval = _res_search_multi(name, rtl, errp);
-	return (*(struct hostent **)rval != NULL) ? NS_SUCCESS : NS_NOTFOUND;
-}
-
-static int
-_dns_ghbyaddr(void *rval, void *cb_data, va_list ap)
-{
-	const void *addr;
-	int addrlen;
-	int af;
-	int *errp;
-	int n;
-	struct hostent *hp;
-	u_char c, *cp;
-	char *bp;
-	struct hostent hbuf;
-	int na;
-#ifdef INET6
-	static const char hex[] = "0123456789abcdef";
-#endif
-	querybuf buf;
-	char qbuf[MAXDNAME+1];
-	char *hlist[2];
-
-	addr = va_arg(ap, const void *);
-	addrlen = va_arg(ap, int);
-	af = va_arg(ap, int);
-	errp = va_arg(ap, int *);
-
-	*(struct hostent **)rval = NULL;
-
-#ifdef INET6
-	/* XXX */
-	if (af == AF_INET6 && IN6_IS_ADDR_LINKLOCAL((struct in6_addr *)addr))
-		return NS_NOTFOUND;
-#endif
-
-	if ((_res.options & RES_INIT) == 0) {
-		if (res_init() < 0) {
-			*errp = h_errno;
-			return NS_UNAVAIL;
-		}
-	}
-	memset(&hbuf, 0, sizeof(hbuf));
-	hbuf.h_name = NULL;
-	hbuf.h_addrtype = af;
-	hbuf.h_length = addrlen;
-	na = 0;
-
-	/* XXX assumes that MAXDNAME is big enough */
-	n = 0;
-	bp = qbuf;
-	cp = (u_char *)addr+addrlen-1;
-	switch (af) {
-#ifdef INET6
-	case AF_INET6:
-		for (; n < addrlen; n++, cp--) {
-			c = *cp;
-			*bp++ = hex[c & 0xf];
-			*bp++ = '.';
-			*bp++ = hex[c >> 4];
-			*bp++ = '.';
-		}
-		strcpy(bp, "ip6.int");
-		break;
-#endif
-	default:
-		for (; n < addrlen; n++, cp--) {
-			c = *cp;
-			if (c >= 100)
-				*bp++ = '0' + c / 100;
-			if (c >= 10)
-				*bp++ = '0' + (c % 100) / 10;
-			*bp++ = '0' + c % 10;
-			*bp++ = '.';
-		}
-		strcpy(bp, "in-addr.arpa");
-		break;
-	}
-
-	n = res_query(qbuf, C_IN, T_PTR, buf.buf, sizeof buf.buf);
-	if (n < 0) {
-		*errp = h_errno;
-		return NS_UNAVAIL;
-	}
-	hp = getanswer(&buf, n, qbuf, T_PTR, &hbuf, errp);
-	if (!hp)
-		return NS_NOTFOUND;
-	hbuf.h_addrtype = af;
-	hbuf.h_length = addrlen;
-	hbuf.h_addr_list = hlist;
-	hlist[0] = (char *)addr;
-	hlist[1] = NULL;
-	*(struct hostent **)rval = _hpcopy(&hbuf, errp);
-	return NS_SUCCESS;
-}
-
-#if 0 // keep gcc happy
-static void
-_dns_shent(int stayopen)
-{
-	if ((_res.options & RES_INIT) == 0) {
-		if (res_init() < 0)
-			return;
-	}
-	if (stayopen)
-		_res.options |= RES_STAYOPEN | RES_USEVC;
-}
-
-static void
-_dns_ehent(void)
-{
-	_res.options &= ~(RES_STAYOPEN | RES_USEVC);
-	res_close();
-}
-#endif
-
-#ifdef ICMPNL
-
-/*
- * experimental:
- *	draft-ietf-ipngwg-icmp-namelookups-02.txt
- *	ifindex is assumed to be encoded in addr.
- */
-#include <sys/uio.h>
-#include <netinet/ip6.h>
-#include <netinet/icmp6.h>
-
-struct _icmp_host_cache {
-	struct _icmp_host_cache *hc_next;
-	int hc_ifindex;
-	struct in6_addr hc_addr;
-	char *hc_name;
-};
-
-static char *
-_icmp_fqdn_query(const struct in6_addr *addr, int ifindex)
-{
-	int s;
-	struct icmp6_filter filter;
-	struct msghdr msg;
-	struct cmsghdr *cmsg;
-	struct in6_pktinfo *pkt;
-	char cbuf[256];
-	char buf[1024];
-	int cc;
-	struct icmp6_fqdn_query *fq;
-	struct icmp6_fqdn_reply *fr;
-	struct _icmp_host_cache *hc;
-	struct sockaddr_in6 sin6;
-	struct iovec iov;
-	fd_set s_fds, fds;
-	struct timeval tout;
-	int len;
-	char *name;
-	static int pid;
-	static struct _icmp_host_cache *hc_head;
-
-	for (hc = hc_head; hc; hc = hc->hc_next) {
-		if (hc->hc_ifindex == ifindex
-		&&  IN6_ARE_ADDR_EQUAL(&hc->hc_addr, addr))
-			return hc->hc_name;
-	}
-
-	if (pid == 0)
-		pid = getpid();
-
-	ICMP6_FILTER_SETBLOCKALL(&filter);
-	ICMP6_FILTER_SETPASS(ICMP6_FQDN_REPLY, &filter);
-
-	FD_ZERO(&s_fds);
-	tout.tv_sec = 0;
-	tout.tv_usec = 200000;	/*XXX: 200ms*/
-
-	fq = (struct icmp6_fqdn_query *)buf;
-	fq->icmp6_fqdn_type = ICMP6_FQDN_QUERY;
-	fq->icmp6_fqdn_code = 0;
-	fq->icmp6_fqdn_cksum = 0;
-	fq->icmp6_fqdn_id = (u_short)pid;
-	fq->icmp6_fqdn_unused = 0;
-	fq->icmp6_fqdn_cookie[0] = 0;
-	fq->icmp6_fqdn_cookie[1] = 0;
-
-	memset(&sin6, 0, sizeof(sin6));
-	sin6.sin6_family = AF_INET6;
-	sin6.sin6_addr = *addr;
-
-	memset(&msg, 0, sizeof(msg));
-	msg.msg_name = (caddr_t)&sin6;
-	msg.msg_namelen = sizeof(sin6);
-	msg.msg_iov = &iov;
-	msg.msg_iovlen = 1;
-	msg.msg_control = NULL;
-	msg.msg_controllen = 0;
-	iov.iov_base = (caddr_t)buf;
-	iov.iov_len = sizeof(struct icmp6_fqdn_query);
-
-	if (ifindex) {
-		msg.msg_control = cbuf;
-		msg.msg_controllen = sizeof(cbuf);
-		cmsg = CMSG_FIRSTHDR(&msg);
-		cmsg->cmsg_len = CMSG_LEN(sizeof(struct in6_pktinfo));
-		cmsg->cmsg_level = IPPROTO_IPV6;
-		cmsg->cmsg_type = IPV6_PKTINFO;
-		pkt = (struct in6_pktinfo *)&cmsg[1];
-		memset(&pkt->ipi6_addr, 0, sizeof(struct in6_addr));
-		pkt->ipi6_ifindex = ifindex;
-		cmsg = CMSG_NXTHDR(&msg, cmsg);
-		msg.msg_controllen = (char *)cmsg - cbuf;
-	}
-
-	if ((s = socket(PF_INET6, SOCK_RAW, IPPROTO_ICMPV6)) < 0)
-		return NULL;
-	(void)setsockopt(s, IPPROTO_ICMPV6, ICMP6_FILTER,
-			 (char *)&filter, sizeof(filter));
-	cc = _sendmsg(s, &msg, 0);
-	if (cc < 0) {
-		close(s);
-		return NULL;
-	}
-	FD_SET(s, &s_fds);
-	for (;;) {
-		fds = s_fds;
-		if (select(s + 1, &fds, NULL, NULL, &tout) <= 0) {
-			close(s);
-			return NULL;
-		}
-		len = sizeof(sin6);
-		cc = _recvfrom(s, buf, sizeof(buf), 0,
-			      (struct sockaddr *)&sin6, &len);
-		if (cc <= 0) {
-			close(s);
-			return NULL;
-		}
-		if (cc < sizeof(struct ip6_hdr) + sizeof(struct icmp6_hdr))
-			continue;
-		if (!IN6_ARE_ADDR_EQUAL(addr, &sin6.sin6_addr))
-			continue;
-		fr = (struct icmp6_fqdn_reply *)(buf + sizeof(struct ip6_hdr));
-		if (fr->icmp6_fqdn_type == ICMP6_FQDN_REPLY)
-			break;
-	}
-	close(s);
-	if (fr->icmp6_fqdn_cookie[1] != 0) {
-		/* rfc1788 type */
-		name = buf + sizeof(struct ip6_hdr) + sizeof(struct icmp6_hdr) + 4;
-		len = (buf + cc) - name;
-	} else {
-		len = fr->icmp6_fqdn_namelen;
-		name = fr->icmp6_fqdn_name;
-	}
-	if (len <= 0)
-		return NULL;
-	name[len] = 0;
-
-	if ((hc = (struct _icmp_host_cache *)malloc(sizeof(*hc))) == NULL)
-		return NULL;
-	/* XXX: limit number of cached entries */
-	hc->hc_ifindex = ifindex;
-	hc->hc_addr = *addr;
-	hc->hc_name = strdup(name);
-	hc->hc_next = hc_head;
-	hc_head = hc;
-	return hc->hc_name;
-}
-
-static struct hostent *
-_icmp_ghbyaddr(const void *addr, int addrlen, int af, int *errp)
-{
-	char *hname;
-	int ifindex;
-	struct in6_addr addr6;
-
-	if (af != AF_INET6) {
-		/*
-		 * Note: rfc1788 defines Who Are You for IPv4,
-		 * but no one implements it.
-		 */
-		return NULL;
-	}
-
-	memcpy(&addr6, addr, addrlen);
-	ifindex = (addr6.s6_addr[2] << 8) | addr6.s6_addr[3];
-	addr6.s6_addr[2] = addr6.s6_addr[3] = 0;
-
-	if (!IN6_IS_ADDR_LINKLOCAL(&addr6))
-		return NULL;	/*XXX*/
-
-	if ((hname = _icmp_fqdn_query(&addr6, ifindex)) == NULL)
-		return NULL;
-	return _hpaddr(af, hname, &addr6, errp);
-}
-#endif /* ICMPNL */
diff --git a/newlib/libc/sys/linux/net/namespace.h b/newlib/libc/sys/linux/net/namespace.h
deleted file mode 100644
index 291aad580..000000000
--- a/newlib/libc/sys/linux/net/namespace.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/include/namespace.h,v 1.9 2002/03/29 22:43:42 markm Exp $
- */
-
-#ifndef _NAMESPACE_H_
-#define _NAMESPACE_H_
-
-/*
- * Adjust names so that headers declare "hidden" names.
- */
-
-/*
- * ISO C (C90) section.  Most names in libc aren't in ISO C, so they
- * should be here.  Most aren't here...
- */
-#define		err				_err
-#define		warn				_warn
-
-/*
- * Prototypes for syscalls/functions that need to be overridden
- * in libc_r/libpthread.
- */
-#define		accept				_accept
-#define		__acl_aclcheck_fd		___acl_aclcheck_fd
-#define		__acl_delete_fd			___acl_delete_fd
-#define		__acl_get_fd			___acl_get_fd
-#define		__acl_set_fd			___acl_set_fd
-#define		bind				_bind
-#define		__cap_get_fd			___cap_get_fd
-#define		__cap_set_fd			___cap_set_fd
-#define		close				_close
-#define		connect				_connect
-#define		dup				_dup
-#define		dup2				_dup2
-#define		execve				_execve
-#define		fcntl				_fcntl
-/*#define		flock				_flock */
-#define		fstat				_fstat
-#define		fstatfs				_fstatfs
-#define		fsync				_fsync
-#define		getdirentries			_getdirentries
-#define		getlogin			_getlogin
-#define		getpeername			_getpeername
-#define		getprogname			_getprogname
-#define		getsockname			_getsockname
-#define		getsockopt			_getsockopt
-#define		ioctl				_ioctl
-#define		listen				_listen
-#define		nanosleep			_nanosleep
-#define		open				_open
-#define		poll				_poll
-#define		pthread_cond_signal		_pthread_cond_signal
-#define		pthread_cond_wait		_pthread_cond_wait
-#define		pthread_cond_init		_pthread_cond_init
-#define		pthread_exit			_pthread_exit
-#define		pthread_getspecific		_pthread_getspecific
-#define		pthread_key_create		_pthread_key_create
-#define		pthread_key_delete		_pthread_key_delete
-#define		pthread_main_np			_pthread_main_np
-#define		pthread_mutex_destroy		_pthread_mutex_destroy
-#define		pthread_mutex_init		_pthread_mutex_init
-#define		pthread_mutex_lock		_pthread_mutex_lock
-#define		pthread_mutex_trylock		_pthread_mutex_trylock
-#define		pthread_mutex_unlock		_pthread_mutex_unlock
-#define		pthread_mutexattr_init		_pthread_mutexattr_init
-#define		pthread_mutexattr_destroy	_pthread_mutexattr_destroy
-#define		pthread_mutexattr_settype	_pthread_mutexattr_settype
-#define		pthread_once			_pthread_once
-#define		pthread_rwlock_init		_pthread_rwlock_init
-#define		pthread_rwlock_rdlock		_pthread_rwlock_rdlock
-#define		pthread_rwlock_wrlock		_pthread_rwlock_wrlock
-#define		pthread_rwlock_unlock		_pthread_rwlock_unlock
-#define		pthread_self			_pthread_self
-#define		pthread_setspecific		_pthread_setspecific
-#define		pthread_sigmask			_pthread_sigmask
-#define		read				_read
-#define		readv				_readv
-#define		recvfrom			_recvfrom
-#define		recvmsg				_recvmsg
-#define		select				_select
-#define		sendmsg				_sendmsg
-#define		sendto				_sendto
-#define		setsockopt			_setsockopt
-/*#define		sigaction			_sigaction*/
-#define		sigprocmask			_sigprocmask
-#define		sigsuspend			_sigsuspend
-#define		socket				_socket
-#define		socketpair			_socketpair
-#define		wait4				_wait4
-#define		write				_write
-#define		writev				_writev
-
-
-/*
- * Other hidden syscalls/functions that libc_r needs to override
- * but are not used internally by libc.
- *
- * XXX - When modifying libc to use one of the following, remove
- * the prototype from below and place it in the list above.
- */
-#if 0
-#define		creat				_creat
-#define		fchflags			_fchflags
-#define		fchmod				_fchmod
-#define		fpathconf			_fpathconf
-#define		msync				_msync
-#define		nfssvc				_nfssvc
-#define		pause				_pause
-#define		pthread_rwlock_destroy		_pthread_rwlock_destroy
-#define		pthread_rwlock_tryrdlock	_pthread_rwlock_tryrdlock
-#define		pthread_rwlock_trywrlock	_pthread_rwlock_trywrlock
-#define		pthread_rwlockattr_init		_pthread_rwlockattr_init
-#define		pthread_rwlockattr_destroy	_pthread_rwlockattr_destroy
-#define		sched_yield			_sched_yield
-#define		sendfile			_sendfile
-#define		shutdown			_shutdown
-#define		sigaltstack			_sigaltstack
-#define		sigpending			_sigpending
-#define		sigreturn			_sigreturn
-#define		sigsetmask			_sigsetmask
-#define		sleep				_sleep
-#define		system				_system
-#define		tcdrain				_tcdrain
-#define		wait				_wait
-#define		waitpid				_waitpid
-#endif
-
-#endif /* _NAMESPACE_H_ */
diff --git a/newlib/libc/sys/linux/net/ns.3 b/newlib/libc/sys/linux/net/ns.3
deleted file mode 100644
index be8d155c3..000000000
--- a/newlib/libc/sys/linux/net/ns.3
+++ /dev/null
@@ -1,133 +0,0 @@
-.\" Copyright (c) 1986, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)ns.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/ns.3,v 1.10 2001/10/01 16:08:56 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt NS 3
-.Os
-.Sh NAME
-.Nm ns_addr ,
-.Nm ns_ntoa
-.Nd Xerox
-.Tn NS Ns (tm)
-address conversion routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netns/ns.h
-.Ft struct ns_addr
-.Fn ns_addr "char *cp"
-.Ft char *
-.Fn ns_ntoa "struct ns_addr ns"
-.Sh DESCRIPTION
-The routine
-.Fn ns_addr
-interprets character strings representing
-.Tn XNS
-addresses, returning binary information suitable
-for use in system calls.
-The routine
-.Fn ns_ntoa
-takes
-.Tn XNS
-addresses and returns
-.Tn ASCII
-strings representing the address in a
-notation in common use in the Xerox Development Environment:
-.Bd -ragged -offset indent
-<network number>.<host number>.<port number>
-.Ed
-.Pp
-Trailing zero fields are suppressed, and each number is printed in hexadecimal,
-in a format suitable for input to
-.Fn ns_addr .
-Any fields lacking super-decimal digits will have a
-trailing
-.Ql H
-appended.
-.Pp
-Unfortunately, no universal standard exists for representing
-.Tn XNS
-addresses.
-An effort has been made to insure that
-.Fn ns_addr
-be compatible with most formats in common use.
-It will first separate an address into 1 to 3 fields using a single delimiter
-chosen from
-period
-.Ql \&. ,
-colon
-.Ql \&:
-or pound-sign
-.Ql \&# .
-Each field is then examined for byte separators (colon or period).
-If there are byte separators, each subfield separated is taken to be
-a small hexadecimal number, and the entirety is taken as a network-byte-ordered
-quantity to be zero extended in the high-network-order bytes.
-Next, the field is inspected for hyphens, in which case
-the field is assumed to be a number in decimal notation
-with hyphens separating the millenia.
-Next, the field is assumed to be a number:
-It is interpreted
-as hexadecimal if there is a leading
-.Ql 0x
-(as in C),
-a trailing
-.Ql H
-(as in Mesa), or there are any super-decimal digits present.
-It is interpreted as octal is there is a leading
-.Ql 0
-and there are no super-octal digits.
-Otherwise, it is converted as a decimal number.
-.Sh RETURN VALUES
-None. (See
-.Sx BUGS . )
-.Sh SEE ALSO
-.Xr hosts 5 ,
-.Xr networks 5
-.Sh HISTORY
-The
-.Fn ns_addr
-and
-.Fn ns_toa
-functions appeared in
-.Bx 4.3 .
-.Sh BUGS
-The string returned by
-.Fn ns_ntoa
-resides in a static memory area.
-The function
-.Fn ns_addr
-should diagnose improperly formed input, and there should be an unambiguous
-way to recognize this.
diff --git a/newlib/libc/sys/linux/net/ns_addr.c b/newlib/libc/sys/linux/net/ns_addr.c
deleted file mode 100644
index a86cf31b7..000000000
--- a/newlib/libc/sys/linux/net/ns_addr.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (c) 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * J.Q. Johnson.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)ns_addr.c	8.1 (Berkeley) 6/7/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <arpa/inet.h>
-#include <netns/ns.h>
-#include <stdio.h>
-#include <string.h>
-
-static struct ns_addr addr, zero_addr;
-
-static void Field(), cvtbase();
-
-struct ns_addr
-ns_addr(name)
-	const char *name;
-{
-	char separator;
-	char *hostname, *socketname, *cp;
-	char buf[50];
-
-	(void)strncpy(buf, name, sizeof(buf) - 1);
-	buf[sizeof(buf) - 1] = '\0';
-
-	/*
-	 * First, figure out what he intends as a field separtor.
-	 * Despite the way this routine is written, the preferred
-	 * form  2-272.AA001234H.01777, i.e. XDE standard.
-	 * Great efforts are made to insure backward compatibility.
-	 */
-	if ((hostname = strchr(buf, '#')) != NULL)
-		separator = '#';
-	else {
-		hostname = strchr(buf, '.');
-		if ((cp = strchr(buf, ':')) &&
-		    ((hostname && cp < hostname) || (hostname == 0))) {
-			hostname = cp;
-			separator = ':';
-		} else
-			separator = '.';
-	}
-	if (hostname)
-		*hostname++ = 0;
-
-	addr = zero_addr;
-	Field(buf, addr.x_net.c_net, 4);
-	if (hostname == 0)
-		return (addr);  /* No separator means net only */
-
-	socketname = strchr(hostname, separator);
-	if (socketname) {
-		*socketname++ = 0;
-		Field(socketname, (u_char *)&addr.x_port, 2);
-	}
-
-	Field(hostname, addr.x_host.c_host, 6);
-
-	return (addr);
-}
-
-static void
-Field(buf, out, len)
-	char *buf;
-	u_char *out;
-	int len;
-{
-	char *bp = buf;
-	int i, ibase, base16 = 0, base10 = 0, clen = 0;
-	int hb[6], *hp;
-
-	/*
-	 * first try 2-273#2-852-151-014#socket
-	 */
-	if ((*buf != '-') &&
-	    (1 < (i = sscanf(buf, "%d-%d-%d-%d-%d",
-			&hb[0], &hb[1], &hb[2], &hb[3], &hb[4])))) {
-		cvtbase(1000L, 256, hb, i, out, len);
-		return;
-	}
-	/*
-	 * try form 8E1#0.0.AA.0.5E.E6#socket
-	 */
-	if (1 < (i = sscanf(buf,"%x.%x.%x.%x.%x.%x",
-			&hb[0], &hb[1], &hb[2], &hb[3], &hb[4], &hb[5]))) {
-		cvtbase(256L, 256, hb, i, out, len);
-		return;
-	}
-	/*
-	 * try form 8E1#0:0:AA:0:5E:E6#socket
-	 */
-	if (1 < (i = sscanf(buf,"%x:%x:%x:%x:%x:%x",
-			&hb[0], &hb[1], &hb[2], &hb[3], &hb[4], &hb[5]))) {
-		cvtbase(256L, 256, hb, i, out, len);
-		return;
-	}
-	/*
-	 * This is REALLY stretching it but there was a
-	 * comma notation separting shorts -- definitely non standard
-	 */
-	if (1 < (i = sscanf(buf,"%x,%x,%x",
-			&hb[0], &hb[1], &hb[2]))) {
-		hb[0] = htons(hb[0]); hb[1] = htons(hb[1]);
-		hb[2] = htons(hb[2]);
-		cvtbase(65536L, 256, hb, i, out, len);
-		return;
-	}
-
-	/* Need to decide if base 10, 16 or 8 */
-	while (*bp) switch (*bp++) {
-
-	case '0': case '1': case '2': case '3': case '4': case '5':
-	case '6': case '7': case '-':
-		break;
-
-	case '8': case '9':
-		base10 = 1;
-		break;
-
-	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-		base16 = 1;
-		break;
-
-	case 'x': case 'X':
-		*--bp = '0';
-		base16 = 1;
-		break;
-
-	case 'h': case 'H':
-		base16 = 1;
-		/* fall into */
-
-	default:
-		*--bp = 0; /* Ends Loop */
-	}
-	if (base16) {
-		ibase = 4096;
-	} else if (base10 == 0 && *buf == '0') {
-		ibase = 512;
-	} else {
-		base10 = 1;
-		ibase = 1000;
-	}
-
-	for (bp = buf; *bp++; ) clen++;
-	if (clen == 0) clen++;
-	if (clen > 18) clen = 18;
-	i = ((clen - 1) / 3) + 1;
-	bp = clen + buf - 3;
-	hp = hb + i - 1;
-
-	while (hp > hb) {
-		if (base16)
-			(void)sscanf(bp, "%3x", hp);
-		else if (base10)
-			(void)sscanf(bp, "%3d", hp);
-		else
-			(void)sscanf(bp, "%3o", hp);
-
-		bp[0] = 0;
-		hp--;
-		bp -= 3;
-	}
-	if (base16)
-		(void)sscanf(buf, "%3x", hp);
-	else if (base10)
-		(void)sscanf(buf, "%3d", hp);
-	else
-		(void)sscanf(buf, "%3o", hp);
-
-	cvtbase((long)ibase, 256, hb, i, out, len);
-}
-
-static void
-cvtbase(oldbase,newbase,input,inlen,result,reslen)
-	long oldbase;
-	int newbase;
-	int input[];
-	int inlen;
-	unsigned char result[];
-	int reslen;
-{
-	int d, e;
-	long sum;
-
-	e = 1;
-	while (e > 0 && reslen > 0) {
-		d = 0; e = 0; sum = 0;
-		/* long division: input=input/newbase */
-		while (d < inlen) {
-			sum = sum*oldbase + (long) input[d];
-			e += (sum > 0);
-			input[d++] = sum / newbase;
-			sum %= newbase;
-		}
-		result[--reslen] = sum;	/* accumulate remainder */
-	}
-	for (d=0; d < reslen; d++)
-		result[d] = 0;
-}
diff --git a/newlib/libc/sys/linux/net/ns_name.c b/newlib/libc/sys/linux/net/ns_name.c
deleted file mode 100644
index 609df14f5..000000000
--- a/newlib/libc/sys/linux/net/ns_name.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-
-#include <errno.h>
-#include <resolv.h>
-#include <string.h>
-
-/* Data. */
-
-static char		digits[] = "0123456789";
-
-/* Forward. */
-
-static int		special(int);
-static int		printable(int);
-static int		dn_find(const u_char *, const u_char *,
-				const u_char * const *,
-				const u_char * const *);
-
-/* Public. */
-
-/*
- * ns_name_ntop(src, dst, dstsiz)
- *	Convert an encoded domain name to printable ascii as per RFC1035.
- * return:
- *	Number of bytes written to buffer, or -1 (with errno set)
- * notes:
- *	The root is returned as "."
- *	All other domains are returned in non absolute form
- */
-int
-ns_name_ntop(const u_char *src, char *dst, size_t dstsiz) {
-	const u_char *cp;
-	char *dn, *eom;
-	u_char c;
-	u_int n;
-
-	cp = src;
-	dn = dst;
-	eom = dst + dstsiz;
-
-	while ((n = *cp++) != 0) {
-		if ((n & NS_CMPRSFLGS) != 0) {
-			/* Some kind of compression pointer. */
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		if (dn != dst) {
-			if (dn >= eom) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			*dn++ = '.';
-		}
-		if (dn + n >= eom) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		for ((void)NULL; n > 0; n--) {
-			c = *cp++;
-			if (special(c)) {
-				if (dn + 1 >= eom) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				*dn++ = '\\';
-				*dn++ = (char)c;
-			} else if (!printable(c)) {
-				if (dn + 3 >= eom) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				*dn++ = '\\';
-				*dn++ = digits[c / 100];
-				*dn++ = digits[(c % 100) / 10];
-				*dn++ = digits[c % 10];
-			} else {
-				if (dn >= eom) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				*dn++ = (char)c;
-			}
-		}
-	}
-	if (dn == dst) {
-		if (dn >= eom) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		*dn++ = '.';
-	}
-	if (dn >= eom) {
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	*dn++ = '\0';
-	return (dn - dst);
-}
-
-/*
- * ns_name_pton(src, dst, dstsiz)
- *	Convert a ascii string into an encoded domain name as per RFC1035.
- * return:
- *	-1 if it fails
- *	1 if string was fully qualified
- *	0 is string was not fully qualified
- * notes:
- *	Enforces label and domain length limits.
- */
-
-int
-ns_name_pton(const char *src, u_char *dst, size_t dstsiz) {
-	u_char *label, *bp, *eom;
-	int c, n, escaped;
-	char *cp;
-
-	escaped = 0;
-	bp = dst;
-	eom = dst + dstsiz;
-	label = bp++;
-
-	while ((c = *src++) != 0) {
-		if (escaped) {
-			if ((cp = strchr(digits, c)) != NULL) {
-				n = (cp - digits) * 100;
-				if ((c = *src++) == 0 ||
-				    (cp = strchr(digits, c)) == NULL) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				n += (cp - digits) * 10;
-				if ((c = *src++) == 0 ||
-				    (cp = strchr(digits, c)) == NULL) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				n += (cp - digits);
-				if (n > 255) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				c = n;
-			}
-			escaped = 0;
-		} else if (c == '\\') {
-			escaped = 1;
-			continue;
-		} else if (c == '.') {
-			c = (bp - label - 1);
-			if ((c & NS_CMPRSFLGS) != 0) {	/* Label too big. */
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			if (label >= eom) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			*label = c;
-			/* Fully qualified ? */
-			if (*src == '\0') {
-				if (c != 0) {
-					if (bp >= eom) {
-						errno = EMSGSIZE;
-						return (-1);
-					}
-					*bp++ = '\0';
-				}
-				if ((bp - dst) > MAXCDNAME) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				return (1);
-			}
-			if (c == 0) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			label = bp++;
-			continue;
-		}
-		if (bp >= eom) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		*bp++ = (u_char)c;
-	}
-	c = (bp - label - 1);
-	if ((c & NS_CMPRSFLGS) != 0) {		/* Label too big. */
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	if (label >= eom) {
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	*label = c;
-	if (c != 0) {
-		if (bp >= eom) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		*bp++ = 0;
-	}
-	if ((bp - dst) > MAXCDNAME) {	/* src too big */
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	return (0);
-}
-
-/*
- * ns_name_unpack(msg, eom, src, dst, dstsiz)
- *	Unpack a domain name from a message, source may be compressed.
- * return:
- *	-1 if it fails, or consumed octets if it succeeds.
- */
-int
-ns_name_unpack(const u_char *msg, const u_char *eom, const u_char *src,
-	       u_char *dst, size_t dstsiz)
-{
-	const u_char *srcp, *dstlim;
-	u_char *dstp;
-	int n, len, checked;
-
-	len = -1;
-	checked = 0;
-	dstp = dst;
-	srcp = src;
-	dstlim = dst + dstsiz;
-	if (srcp < msg || srcp >= eom) {
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	/* Fetch next label in domain name. */
-	while ((n = *srcp++) != 0) {
-		/* Check for indirection. */
-		switch (n & NS_CMPRSFLGS) {
-		case 0:
-			/* Limit checks. */
-			if (dstp + n + 1 >= dstlim || srcp + n >= eom) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			checked += n + 1;
-			*dstp++ = n;
-			memcpy(dstp, srcp, n);
-			dstp += n;
-			srcp += n;
-			break;
-
-		case NS_CMPRSFLGS:
-			if (srcp >= eom) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			if (len < 0)
-				len = srcp - src + 1;
-			srcp = msg + (((n & 0x3f) << 8) | (*srcp & 0xff));
-			if (srcp < msg || srcp >= eom) {  /* Out of range. */
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			checked += 2;
-			/*
-			 * Check for loops in the compressed name;
-			 * if we've looked at the whole message,
-			 * there must be a loop.
-			 */
-			if (checked >= eom - msg) {
-				errno = EMSGSIZE;
-				return (-1);
-			}
-			break;
-
-		default:
-			errno = EMSGSIZE;
-			return (-1);			/* flag error */
-		}
-	}
-	*dstp = '\0';
-	if (len < 0)
-		len = srcp - src;
-	return (len);
-}
-
-/*
- * ns_name_pack(src, dst, dstsiz, dnptrs, lastdnptr)
- *	Pack domain name 'domain' into 'comp_dn'.
- * return:
- *	Size of the compressed name, or -1.
- * notes:
- *	'dnptrs' is an array of pointers to previous compressed names.
- *	dnptrs[0] is a pointer to the beginning of the message. The array
- *	ends with NULL.
- *	'lastdnptr' is a pointer to the end of the array pointed to
- *	by 'dnptrs'.
- * Side effects:
- *	The list of pointers in dnptrs is updated for labels inserted into
- *	the message as we compress the name.  If 'dnptr' is NULL, we don't
- *	try to compress names. If 'lastdnptr' is NULL, we don't update the
- *	list.
- */
-int
-ns_name_pack(const u_char *src, u_char *dst, int dstsiz,
-	     const u_char **dnptrs, const u_char **lastdnptr)
-{
-	u_char *dstp;
-	const u_char **cpp, **lpp, *eob, *msg;
-	const u_char *srcp;
-	int n, l;
-
-	srcp = src;
-	dstp = dst;
-	eob = dstp + dstsiz;
-	lpp = cpp = NULL;
-	if (dnptrs != NULL) {
-		if ((msg = *dnptrs++) != NULL) {
-			for (cpp = dnptrs; *cpp != NULL; cpp++)
-				(void)NULL;
-			lpp = cpp;	/* end of list to search */
-		}
-	} else
-		msg = NULL;
-
-	/* make sure the domain we are about to add is legal */
-	l = 0;
-	do {
-		n = *srcp;
-		if ((n & NS_CMPRSFLGS) != 0) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		l += n + 1;
-		if (l > MAXCDNAME) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		srcp += n + 1;
-	} while (n != 0);
-
-	srcp = src;
-	do {
-		/* Look to see if we can use pointers. */
-		n = *srcp;
-		if (n != 0 && msg != NULL) {
-			l = dn_find(srcp, msg, (const u_char * const *)dnptrs,
-				    (const u_char * const *)lpp);
-			if (l >= 0) {
-				if (dstp + 1 >= eob) {
-					errno = EMSGSIZE;
-					return (-1);
-				}
-				*dstp++ = (l >> 8) | NS_CMPRSFLGS;
-				*dstp++ = l % 256;
-				return (dstp - dst);
-			}
-			/* Not found, save it. */
-			if (lastdnptr != NULL && cpp < lastdnptr - 1 &&
-			    (dstp - msg) < 0x4000) {
-				*cpp++ = dstp;
-				*cpp = NULL;
-			}
-		}
-		/* copy label to buffer */
-		if (n & NS_CMPRSFLGS) {		/* Should not happen. */
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		if (dstp + 1 + n >= eob) {
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		memcpy(dstp, srcp, n + 1);
-		srcp += n + 1;
-		dstp += n + 1;
-	} while (n != 0);
-
-	if (dstp > eob) {
-		if (msg != NULL)
-			*lpp = NULL;
-		errno = EMSGSIZE;
-		return (-1);
-	} 
-	return (dstp - dst);
-}
-
-/*
- * ns_name_uncompress(msg, eom, src, dst, dstsiz)
- *	Expand compressed domain name to presentation format.
- * return:
- *	Number of bytes read out of `src', or -1 (with errno set).
- * note:
- *	Root domain returns as "." not "".
- */
-int
-ns_name_uncompress(const u_char *msg, const u_char *eom, const u_char *src,
-		   char *dst, size_t dstsiz)
-{
-	u_char tmp[NS_MAXCDNAME];
-	int n;
-	
-	if ((n = ns_name_unpack(msg, eom, src, tmp, sizeof tmp)) == -1)
-		return (-1);
-	if (ns_name_ntop(tmp, dst, dstsiz) == -1)
-		return (-1);
-	return (n);
-}
-
-/*
- * ns_name_compress(src, dst, dstsiz, dnptrs, lastdnptr)
- *	Compress a domain name into wire format, using compression pointers.
- * return:
- *	Number of bytes consumed in `dst' or -1 (with errno set).
- * notes:
- *	'dnptrs' is an array of pointers to previous compressed names.
- *	dnptrs[0] is a pointer to the beginning of the message.
- *	The list ends with NULL.  'lastdnptr' is a pointer to the end of the
- *	array pointed to by 'dnptrs'. Side effect is to update the list of
- *	pointers for labels inserted into the message as we compress the name.
- *	If 'dnptr' is NULL, we don't try to compress names. If 'lastdnptr'
- *	is NULL, we don't update the list.
- */
-int
-ns_name_compress(const char *src, u_char *dst, size_t dstsiz,
-		 const u_char **dnptrs, const u_char **lastdnptr)
-{
-	u_char tmp[NS_MAXCDNAME];
-
-	if (ns_name_pton(src, tmp, sizeof tmp) == -1)
-		return (-1);
-	return (ns_name_pack(tmp, dst, dstsiz, dnptrs, lastdnptr));
-}
-
-/*
- * ns_name_skip(ptrptr, eom)
- *	Advance *ptrptr to skip over the compressed name it points at.
- * return:
- *	0 on success, -1 (with errno set) on failure.
- */
-int
-ns_name_skip(const u_char **ptrptr, const u_char *eom) {
-	const u_char *cp;
-	u_int n;
-
-	cp = *ptrptr;
-	while (cp < eom && (n = *cp++) != 0) {
-		/* Check for indirection. */
-		switch (n & NS_CMPRSFLGS) {
-		case 0:			/* normal case, n == len */
-			cp += n;
-			continue;
-		case NS_CMPRSFLGS:	/* indirection */
-			cp++;
-			break;
-		default:		/* illegal type */
-			errno = EMSGSIZE;
-			return (-1);
-		}
-		break;
-	}
-	if (cp > eom) {
-		errno = EMSGSIZE;
-		return (-1);
-	}
-	*ptrptr = cp;
-	return (0);
-}
-
-/* Private. */
-
-/*
- * special(ch)
- *	Thinking in noninternationalized USASCII (per the DNS spec),
- *	is this characted special ("in need of quoting") ?
- * return:
- *	boolean.
- */
-static int
-special(int ch) {
-	switch (ch) {
-	case 0x22: /* '"' */
-	case 0x2E: /* '.' */
-	case 0x3B: /* ';' */
-	case 0x5C: /* '\\' */
-	/* Special modifiers in zone files. */
-	case 0x40: /* '@' */
-	case 0x24: /* '$' */
-		return (1);
-	default:
-		return (0);
-	}
-}
-
-/*
- * printable(ch)
- *	Thinking in noninternationalized USASCII (per the DNS spec),
- *	is this character visible and not a space when printed ?
- * return:
- *	boolean.
- */
-static int
-printable(int ch) {
-	return (ch > 0x20 && ch < 0x7f);
-}
-
-/*
- *	Thinking in noninternationalized USASCII (per the DNS spec),
- *	convert this character to lower case if it's upper case.
- */
-static int
-mklower(int ch) {
-	if (ch >= 0x41 && ch <= 0x5A)
-		return (ch + 0x20);
-	return (ch);
-}
-
-/*
- * dn_find(domain, msg, dnptrs, lastdnptr)
- *	Search for the counted-label name in an array of compressed names.
- * return:
- *	offset from msg if found, or -1.
- * notes:
- *	dnptrs is the pointer to the first name on the list,
- *	not the pointer to the start of the message.
- */
-static int
-dn_find(const u_char *domain, const u_char *msg,
-	const u_char * const *dnptrs,
-	const u_char * const *lastdnptr)
-{
-	const u_char *dn, *cp, *sp;
-	const u_char * const *cpp;
-	u_int n;
-
-	for (cpp = dnptrs; cpp < lastdnptr; cpp++) {
-		dn = domain;
-		sp = cp = *cpp;
-		while ((n = *cp++) != 0) {
-			/*
-			 * check for indirection
-			 */
-			switch (n & NS_CMPRSFLGS) {
-			case 0:			/* normal case, n == len */
-				if (n != *dn++)
-					goto next;
-				for ((void)NULL; n > 0; n--)
-					if (mklower(*dn++) != mklower(*cp++))
-						goto next;
-				/* Is next root for both ? */
-				if (*dn == '\0' && *cp == '\0')
-					return (sp - msg);
-				if (*dn)
-					continue;
-				goto next;
-
-			case NS_CMPRSFLGS:	/* indirection */
-				cp = msg + (((n & 0x3f) << 8) | *cp);
-				break;
-
-			default:	/* illegal type */
-				errno = EMSGSIZE;
-				return (-1);
-			}
-		}
- next: ;
-	}
-	errno = ENOENT;
-	return (-1);
-}
diff --git a/newlib/libc/sys/linux/net/ns_netint.c b/newlib/libc/sys/linux/net/ns_netint.c
deleted file mode 100644
index 18c9cccd6..000000000
--- a/newlib/libc/sys/linux/net/ns_netint.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* Import. */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-
-u_int
-ns_get16(const u_char *src) {
-	u_int dst;
-
-	NS_GET16(dst, src);
-	return (dst);
-}
-
-u_long
-ns_get32(const u_char *src) {
-	u_long dst;
-
-	NS_GET32(dst, src);
-	return (dst);
-}
-
-void
-ns_put16(u_int src, u_char *dst) {
-	NS_PUT16(src, dst);
-}
-
-void
-ns_put32(u_long src, u_char *dst) {
-	NS_PUT32(src, dst);
-}
diff --git a/newlib/libc/sys/linux/net/ns_ntoa.c b/newlib/libc/sys/linux/net/ns_ntoa.c
deleted file mode 100644
index 018076064..000000000
--- a/newlib/libc/sys/linux/net/ns_ntoa.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)ns_ntoa.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <arpa/inet.h>
-#include <netns/ns.h>
-#include <stdio.h>
-
-char *
-ns_ntoa(addr)
-	struct ns_addr addr;
-{
-	static char obuf[40];
-	union { union ns_net net_e; u_long long_e; } net;
-	u_short port = htons(addr.x_port);
-	char *cp;
-	char *cp2;
-	u_char *up = addr.x_host.c_host;
-	u_char *uplim = up + 6;
-	static char *spectHex();
-
-	net.net_e = addr.x_net;
-	sprintf(obuf, "%lx", (u_long)ntohl(net.long_e));
-	cp = spectHex(obuf);
-	cp2 = cp + 1;
-	while (*up==0 && up < uplim) up++;
-	if (up == uplim) {
-		if (port) {
-			sprintf(cp, ".0");
-			cp += 2;
-		}
-	} else {
-		sprintf(cp, ".%x", *up++);
-		while (up < uplim) {
-			while (*cp) cp++;
-			sprintf(cp, "%02x", *up++);
-		}
-		cp = spectHex(cp2);
-	}
-	if (port) {
-		sprintf(cp, ".%x", port);
-		spectHex(cp + 1);
-	}
-	return (obuf);
-}
-
-static char *
-spectHex(p0)
-	char *p0;
-{
-	int ok = 0;
-	int nonzero = 0;
-	char *p = p0;
-	for (; *p; p++) switch (*p) {
-
-	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
-		*p += ('A' - 'a');
-		/* fall into . . . */
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-		ok = 1;
-	case '1': case '2': case '3': case '4': case '5':
-	case '6': case '7': case '8': case '9':
-		nonzero = 1;
-	}
-	if (nonzero && !ok) { *p++ = 'H'; *p = 0; }
-	return (p);
-}
diff --git a/newlib/libc/sys/linux/net/ns_parse.c b/newlib/libc/sys/linux/net/ns_parse.c
deleted file mode 100644
index 38a684b87..000000000
--- a/newlib/libc/sys/linux/net/ns_parse.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-
-#include <errno.h>
-#include <resolv.h>
-#include <string.h>
-
-/* These need to be in the same order as the nres.h:ns_flag enum. */
-struct _ns_flagdata _ns_flagdata[16] = {
-	{ 0x8000, 15 },		/* qr. */
-	{ 0x7800, 11 },		/* opcode. */
-	{ 0x0400, 10 },		/* aa. */
-	{ 0x0200, 9 },		/* tc. */
-	{ 0x0100, 8 },		/* rd. */
-	{ 0x0080, 7 },		/* ra. */
-	{ 0x0040, 6 },		/* z. */
-	{ 0x0020, 5 },		/* ad. */
-	{ 0x0010, 4 },		/* cd. */
-	{ 0x000f, 0 },		/* rcode. */
-	{ 0x0000, 0 },		/* expansion (1/6). */
-	{ 0x0000, 0 },		/* expansion (2/6). */
-	{ 0x0000, 0 },		/* expansion (3/6). */
-	{ 0x0000, 0 },		/* expansion (4/6). */
-	{ 0x0000, 0 },		/* expansion (5/6). */
-	{ 0x0000, 0 },		/* expansion (6/6). */
-};
-
-static int
-skiprr(const u_char *ptr, const u_char *eom, ns_sect section, int count) {
-	const u_char *optr = ptr;
-
-	for ((void)NULL; count > 0; count--) {
-		int b, rdlength;
-
-		b = dn_skipname(ptr, eom);
-		if (b < 0)
-			goto emsgsize;
-		ptr += b/*Name*/ + NS_INT16SZ/*Type*/ + NS_INT16SZ/*Class*/;
-		if (section != ns_s_qd) {
-			if (ptr + NS_INT32SZ > eom)
-				goto emsgsize;
-			ptr += NS_INT32SZ/*TTL*/;
-			if (ptr + NS_INT16SZ > eom)
-				goto emsgsize;
-			NS_GET16(rdlength, ptr);
-			ptr += rdlength/*RData*/;
-		}
-	}
-	if (ptr > eom)
-		goto emsgsize;
-	return (ptr - optr);
- emsgsize:
-	errno = EMSGSIZE;
-	return (-1);
-}
-
-int
-ns_initparse(const u_char *msg, int msglen, ns_msg *handle) {
-	const u_char *eom = msg + msglen;
-	int i;
-
-	memset(handle, 0x5e, sizeof *handle);
-	handle->_msg = msg;
-	handle->_eom = eom;
-	if (msg + NS_INT16SZ > eom)
-		goto emsgsize;
-	NS_GET16(handle->_id, msg);
-	if (msg + NS_INT16SZ > eom)
-		goto emsgsize;
-	NS_GET16(handle->_flags, msg);
-	for (i = 0; i < ns_s_max; i++) {
-		if (msg + NS_INT16SZ > eom)
-			goto emsgsize;
-		NS_GET16(handle->_counts[i], msg);
-	}
-	for (i = 0; i < ns_s_max; i++)
-		if (handle->_counts[i] == 0)
-			handle->_sections[i] = NULL;
-		else {
-			int b = skiprr(msg, eom, (ns_sect)i,
-				       handle->_counts[i]);
-
-			if (b < 0)
-				return (-1);
-			handle->_sections[i] = msg;
-			msg += b;
-		}
-	if (msg != eom)
-		goto emsgsize;
-	handle->_sect = ns_s_max;
-	handle->_rrnum = -1;
-	handle->_ptr = NULL;
-	return (0);
- emsgsize:
-	errno = EMSGSIZE;
-	return (-1);
-}
-
-int
-ns_parserr(ns_msg *handle, ns_sect section, int rrnum, ns_rr *rr) {
-	int b;
-
-	/* Make section right. */
-	if (section < 0 || section >= ns_s_max)
-		goto enodev;
-	if ((int)section != (int)handle->_sect) {
-		handle->_sect = section;
-		handle->_rrnum = 0;
-		handle->_ptr = handle->_sections[(int)section];
-	}
-
-	/* Make rrnum right. */
-	if (rrnum == -1)
-		rrnum = handle->_rrnum;
-	if (rrnum < 0 || rrnum >= handle->_counts[(int)section])
-		goto enodev;
-	if (rrnum < handle->_rrnum) {
-		handle->_rrnum = 0;
-		handle->_ptr = handle->_sections[(int)section];
-	}
-	
-	b = skiprr(handle->_msg, handle->_eom, section,
-		   rrnum - handle->_rrnum);
-	if (b < 0)
-		return (-1);
-	handle->_ptr += b;
-	handle->_rrnum = rrnum;
-
-	/* Do the parse. */
-	b = dn_expand(handle->_msg, handle->_eom,
-		      handle->_ptr, rr->name, NS_MAXDNAME);
-	if (b < 0)
-		return (-1);
-	handle->_ptr += b;
-	if (handle->_ptr + NS_INT16SZ > handle->_eom)
-		goto emsgsize;
-	NS_GET16(rr->type, handle->_ptr);
-	if (handle->_ptr + NS_INT16SZ > handle->_eom)
-		goto emsgsize;
-	NS_GET16(rr->rr_class, handle->_ptr);
-	if (section == ns_s_qd) {
-		rr->ttl = 0;
-		rr->rdlength = 0;
-		rr->rdata = NULL;
-	} else {
-		if (handle->_ptr + NS_INT32SZ > handle->_eom)
-			goto emsgsize;
-		NS_GET32(rr->ttl, handle->_ptr);
-		if (handle->_ptr + NS_INT16SZ > handle->_eom)
-			goto emsgsize;
-		NS_GET16(rr->rdlength, handle->_ptr);
-		if (handle->_ptr + rr->rdlength > handle->_eom)
-			goto emsgsize;
-		rr->rdata = handle->_ptr;
-		handle->_ptr += rr->rdlength;
-	}
-	handle->_rrnum++;
-
-	/* All done. */
-	return (0);
- enodev:
-	errno = ENODEV;
-	return (-1);
- emsgsize:
-	errno = EMSGSIZE;
-	return (-1);
-}
diff --git a/newlib/libc/sys/linux/net/ns_print.c b/newlib/libc/sys/linux/net/ns_print.c
deleted file mode 100644
index 7cce6d7aa..000000000
--- a/newlib/libc/sys/linux/net/ns_print.c
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- * Copyright (c) 1996, 1998 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* Import. */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-
-#include <assert.h>
-#include <errno.h>
-#include <resolv.h>
-#include <string.h>
-#include <ctype.h>
-
-#define SPRINTF(x) ((size_t)sprintf x)
-
-/* Forward. */
-
-static size_t	prune_origin(const char *name, const char *origin);
-static int	charstr(const u_char *rdata, const u_char *edata,
-			char **buf, size_t *buflen);
-static int	addname(const u_char *msg, size_t msglen,
-			const u_char **p, const char *origin,
-			char **buf, size_t *buflen);
-static void	addlen(size_t len, char **buf, size_t *buflen);
-static int	addstr(const char *src, size_t len,
-		       char **buf, size_t *buflen);
-static int	addtab(size_t len, size_t target, int spaced,
-		       char **buf, size_t *buflen);
-
-/* Macros. */
-
-#define	T(x) \
-	do { \
-		if ((x) < 0) \
-			return (-1); \
-	} while (0)
-
-/* Public. */
-
-/*
- * int
- * ns_sprintrr(handle, rr, name_ctx, origin, buf, buflen)
- *	Convert an RR to presentation format.
- * return:
- *	Number of characters written to buf, or -1 (check errno).
- */
-int
-ns_sprintrr(const ns_msg *handle, const ns_rr *rr,
-	    const char *name_ctx, const char *origin,
-	    char *buf, size_t buflen)
-{
-	int n;
-
-	n = ns_sprintrrf(ns_msg_base(*handle), ns_msg_size(*handle),
-			 ns_rr_name(*rr), ns_rr_class(*rr), ns_rr_type(*rr),
-			 ns_rr_ttl(*rr), ns_rr_rdata(*rr), ns_rr_rdlen(*rr),
-			 name_ctx, origin, buf, buflen);
-	return (n);
-}
-
-/*
- * int
- * ns_sprintrrf(msg, msglen, name, class, type, ttl, rdata, rdlen,
- *	       name_ctx, origin, buf, buflen)
- *	Convert the fields of an RR into presentation format.
- * return:
- *	Number of characters written to buf, or -1 (check errno).
- */
-int
-ns_sprintrrf(const u_char *msg, size_t msglen,
-	    const char *name, ns_class class, ns_type type,
-	    u_long ttl, const u_char *rdata, size_t rdlen,
-	    const char *name_ctx, const char *origin,
-	    char *buf, size_t buflen)
-{
-	const char *obuf = buf;
-	const u_char *edata = rdata + rdlen;
-	int spaced = 0;
-
-	const char *comment;
-	char tmp[100];
-	int len, x;
-
-	/*
-	 * Owner.
-	 */
-	if (name_ctx != NULL && strcasecmp(name_ctx, name) == 0) {
-		T(addstr("\t\t\t", 3, &buf, &buflen));
-	} else {
-		len = prune_origin(name, origin);
-		if (len == 0) {
-			T(addstr("@\t\t\t", 4, &buf, &buflen));
-		} else {
-			T(addstr(name, len, &buf, &buflen));
-			/* Origin not used and no trailing dot? */
-			if ((!origin || !origin[0] || name[len] == '\0') &&
-			    name[len - 1] != '.') {
-				T(addstr(".", 1, &buf, &buflen));
-				len++;
-			}
-			T(spaced = addtab(len, 24, spaced, &buf, &buflen));
-		}
-	}
-
-	/*
-	 * TTL, Class, Type.
-	 */
-	T(x = ns_format_ttl(ttl, buf, buflen));
-	addlen(x, &buf, &buflen);
-	len = SPRINTF((tmp, " %s %s", p_class(class), p_type(type)));
-	T(addstr(tmp, len, &buf, &buflen));
-	T(spaced = addtab(x + len, 16, spaced, &buf, &buflen));
-
-	/*
-	 * RData.
-	 */
-	switch (type) {
-	case ns_t_a:
-		if (rdlen != NS_INADDRSZ)
-			goto formerr;
-		(void) inet_ntop(AF_INET, rdata, buf, buflen);
-		addlen(strlen(buf), &buf, &buflen);
-		break;
-
-	case ns_t_cname:
-	case ns_t_mb:
-	case ns_t_mg:
-	case ns_t_mr:
-	case ns_t_ns:
-	case ns_t_ptr:
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		break;
-
-	case ns_t_hinfo:
-	case ns_t_isdn:
-		/* First word. */
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Second word. */
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		break;
-
-	case ns_t_soa: {
-		u_long t;
-
-		/* Server name. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Administrator name. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		T(addstr(" (\n", 3, &buf, &buflen));
-		spaced = 0;
-
-		if ((edata - rdata) != 5*NS_INT32SZ)
-			goto formerr;
-
-		/* Serial number. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		T(addstr("\t\t\t\t\t", 5, &buf, &buflen));
-		len = SPRINTF((tmp, "%lu", t));
-		T(addstr(tmp, len, &buf, &buflen));
-		T(spaced = addtab(len, 16, spaced, &buf, &buflen));
-		T(addstr("; serial\n", 9, &buf, &buflen));
-		spaced = 0;
-
-		/* Refresh interval. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		T(addstr("\t\t\t\t\t", 5, &buf, &buflen));
-		T(len = ns_format_ttl(t, buf, buflen));
-		addlen(len, &buf, &buflen);
-		T(spaced = addtab(len, 16, spaced, &buf, &buflen));
-		T(addstr("; refresh\n", 10, &buf, &buflen));
-		spaced = 0;
-
-		/* Retry interval. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		T(addstr("\t\t\t\t\t", 5, &buf, &buflen));
-		T(len = ns_format_ttl(t, buf, buflen));
-		addlen(len, &buf, &buflen);
-		T(spaced = addtab(len, 16, spaced, &buf, &buflen));
-		T(addstr("; retry\n", 8, &buf, &buflen));
-		spaced = 0;
-
-		/* Expiry. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		T(addstr("\t\t\t\t\t", 5, &buf, &buflen));
-		T(len = ns_format_ttl(t, buf, buflen));
-		addlen(len, &buf, &buflen);
-		T(spaced = addtab(len, 16, spaced, &buf, &buflen));
-		T(addstr("; expiry\n", 9, &buf, &buflen));
-		spaced = 0;
-
-		/* Minimum TTL. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		T(addstr("\t\t\t\t\t", 5, &buf, &buflen));
-		T(len = ns_format_ttl(t, buf, buflen));
-		addlen(len, &buf, &buflen);
-		T(addstr(" )", 2, &buf, &buflen));
-		T(spaced = addtab(len, 16, spaced, &buf, &buflen));
-		T(addstr("; minimum\n", 10, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_mx:
-	case ns_t_afsdb:
-	case ns_t_rt: {
-		u_int t;
-
-		if (rdlen < NS_INT16SZ)
-			goto formerr;
-
-		/* Priority. */
-		t = ns_get16(rdata);
-		rdata += NS_INT16SZ;
-		len = SPRINTF((tmp, "%u ", t));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Target. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_px: {
-		u_int t;
-
-		if (rdlen < NS_INT16SZ)
-			goto formerr;
-
-		/* Priority. */
-		t = ns_get16(rdata);
-		rdata += NS_INT16SZ;
-		len = SPRINTF((tmp, "%u ", t));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Name1. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Name2. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_x25:
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		break;
-
-	case ns_t_txt:
-		while (rdata < edata) {
-			T(len = charstr(rdata, edata, &buf, &buflen));
-			if (len == 0)
-				goto formerr;
-			rdata += len;
-			if (rdata < edata)
-				T(addstr(" ", 1, &buf, &buflen));
-		}
-		break;
-
-	case ns_t_nsap: {
-		char t[255*3];
-
-		(void) inet_nsap_ntoa(rdlen, rdata, t);
-		T(addstr(t, strlen(t), &buf, &buflen));
-		break;
-	    }
-
-	case ns_t_aaaa:
-		if (rdlen != NS_IN6ADDRSZ)
-			goto formerr;
-		(void) inet_ntop(AF_INET6, rdata, buf, buflen);
-		addlen(strlen(buf), &buf, &buflen);
-		break;
-
-	case ns_t_loc: {
-		char t[255];
-
-		/* XXX protocol format checking? */
-		(void) loc_ntoa(rdata, t);
-		T(addstr(t, strlen(t), &buf, &buflen));
-		break;
-	    }
-
-	case ns_t_naptr: {
-		u_int order, preference;
-		char t[50];
-
-		if (rdlen < 2*NS_INT16SZ)
-			goto formerr;
-
-		/* Order, Precedence. */
-		order = ns_get16(rdata);	rdata += NS_INT16SZ;
-		preference = ns_get16(rdata);	rdata += NS_INT16SZ;
-		len = SPRINTF((t, "%u %u ", order, preference));
-		T(addstr(t, len, &buf, &buflen));
-
-		/* Flags. */
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Service. */
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Regexp. */
-		T(len = charstr(rdata, edata, &buf, &buflen));
-		if (len < 0)
-			return (-1);
-		if (len == 0)
-			goto formerr;
-		rdata += len;
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Server. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		break;
-	    }
-
-	case ns_t_srv: {
-		u_int priority, weight, port;
-		char t[50];
-
-		if (rdlen < NS_INT16SZ*3)
-			goto formerr;
-
-		/* Priority, Weight, Port. */
-		priority = ns_get16(rdata);  rdata += NS_INT16SZ;
-		weight   = ns_get16(rdata);  rdata += NS_INT16SZ;
-		port     = ns_get16(rdata);  rdata += NS_INT16SZ;
-		len = SPRINTF((t, "%u %u %u ", priority, weight, port));
-		T(addstr(t, len, &buf, &buflen));
-
-		/* Server. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		break;
-	    }
-
-	case ns_t_minfo:
-	case ns_t_rp:
-		/* Name1. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-		T(addstr(" ", 1, &buf, &buflen));
-
-		/* Name2. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-
-		break;
-
-	case ns_t_wks: {
-		int n, lcnt;
-
-		if (rdlen < NS_INT32SZ + 1)
-			goto formerr;
-
-		/* Address. */
-		(void) inet_ntop(AF_INET, rdata, buf, buflen);
-		addlen(strlen(buf), &buf, &buflen);
-		rdata += NS_INADDRSZ;
-
-		/* Protocol. */
-		len = SPRINTF((tmp, " %u ( ", *rdata));
-		T(addstr(tmp, len, &buf, &buflen));
-		rdata += NS_INT8SZ;
-
-		/* Bit map. */
-		n = 0;
-		lcnt = 0;
-		while (rdata < edata) {
-			u_int c = *rdata++;
-			do {
-				if (c & 0200) {
-					if (lcnt == 0) {
-						T(addstr("\n\t\t\t\t", 5,
-							 &buf, &buflen));
-						lcnt = 10;
-						spaced = 0;
-					}
-					len = SPRINTF((tmp, "%d ", n));
-					T(addstr(tmp, len, &buf, &buflen));
-					lcnt--;
-				}
-				c <<= 1;
-			} while (++n & 07);
-		}
-		T(addstr(")", 1, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_key: {
-		char base64_key[NS_MD5RSA_MAX_BASE64];
-		u_int keyflags, protocol, algorithm;
-		const char *leader;
-		int n;
-
-		if (rdlen < NS_INT16SZ + NS_INT8SZ + NS_INT8SZ)
-			goto formerr;
-
-		/* Key flags, Protocol, Algorithm. */
-		keyflags = ns_get16(rdata);  rdata += NS_INT16SZ;
-		protocol = *rdata++;
-		algorithm = *rdata++;
-		len = SPRINTF((tmp, "0x%04x %u %u",
-			       keyflags, protocol, algorithm));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Public key data. */
-		len = b64_ntop(rdata, edata - rdata,
-			       base64_key, sizeof base64_key);
-		if (len < 0)
-			goto formerr;
-		if (len > 15) {
-			T(addstr(" (", 2, &buf, &buflen));
-			leader = "\n\t\t";
-			spaced = 0;
-		} else
-			leader = " ";
-		for (n = 0; n < len; n += 48) {
-			T(addstr(leader, strlen(leader), &buf, &buflen));
-			T(addstr(base64_key + n, MIN(len - n, 48),
-				 &buf, &buflen));
-		}
-		if (len > 15)
-			T(addstr(" )", 2, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_sig: {
-		char base64_key[NS_MD5RSA_MAX_BASE64];
-		u_int type, algorithm, labels, footprint;
-		const char *leader;
-		u_long t;
-		int n;
-
-		if (rdlen < 22)
-			goto formerr;
-
-		/* Type covered, Algorithm, Label count, Original TTL. */
-	        type = ns_get16(rdata);  rdata += NS_INT16SZ;
-		algorithm = *rdata++;
-		labels = *rdata++;
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		len = SPRINTF((tmp, " %s %d %lu ",
-			       p_type(type), algorithm, t));
-		T(addstr(tmp, len, &buf, &buflen));
-		if (labels != (u_int)dn_count_labels(name))
-			goto formerr;
-
-		/* Signature expiry. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		len = SPRINTF((tmp, "%s ", p_secstodate(t)));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Time signed. */
-		t = ns_get32(rdata);  rdata += NS_INT32SZ;
-		len = SPRINTF((tmp, "%s ", p_secstodate(t)));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Signature Footprint. */
-		footprint = ns_get16(rdata);  rdata += NS_INT16SZ;
-		len = SPRINTF((tmp, "%u ", footprint));
-		T(addstr(tmp, len, &buf, &buflen));
-
-		/* Signer's name. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-
-		/* Signature. */
-		len = b64_ntop(rdata, edata - rdata,
-			       base64_key, sizeof base64_key);
-		if (len > 15) {
-			T(addstr(" (", 2, &buf, &buflen));
-			leader = "\n\t\t";
-			spaced = 0;
-		} else
-			leader = " ";
-		if (len < 0)
-			goto formerr;
-		for (n = 0; n < len; n += 48) {
-			T(addstr(leader, strlen(leader), &buf, &buflen));
-			T(addstr(base64_key + n, MIN(len - n, 48),
-				 &buf, &buflen));
-		}
-		if (len > 15)
-			T(addstr(" )", 2, &buf, &buflen));
-
-		break;
-	    }
-
-	case ns_t_nxt: {
-		int n, c;
-
-		/* Next domain name. */
-		T(addname(msg, msglen, &rdata, origin, &buf, &buflen));
-
-		/* Type bit map. */
-		n = edata - rdata;
-		for (c = 0; c < n*8; c++)
-			if (NS_NXT_BIT_ISSET(c, rdata)) {
-				len = SPRINTF((tmp, " %s", p_type(c)));
-				T(addstr(tmp, len, &buf, &buflen));
-			}
-		break;
-	    }
-
-	default:
-		comment = "unknown RR type";
-		goto hexify;
-	}
-	return (buf - obuf);
- formerr:
-	comment = "RR format error";
- hexify: {
-	int n, m;
-	char *p;
-
-	len = SPRINTF((tmp, "\\#(\t\t; %s", comment));
-	T(addstr(tmp, len, &buf, &buflen));
-	while (rdata < edata) {
-		p = tmp;
-		p += SPRINTF((p, "\n\t"));
-		spaced = 0;
-		n = MIN(16, edata - rdata);
-		for (m = 0; m < n; m++)
-			p += SPRINTF((p, "%02x ", rdata[m]));
-		T(addstr(tmp, p - tmp, &buf, &buflen));
-		if (n < 16) {
-			T(addstr(")", 1, &buf, &buflen));
-			T(addtab(p - tmp + 1, 48, spaced, &buf, &buflen));
-		}
-		p = tmp;
-		p += SPRINTF((p, "; "));
-		for (m = 0; m < n; m++)
-			*p++ = (isascii(rdata[m]) && isprint(rdata[m]))
-				? rdata[m]
-				: '.';
-		T(addstr(tmp, p - tmp, &buf, &buflen));
-		rdata += n;
-	}
-	return (buf - obuf);
-    }
-}
-
-/* Private. */
-
-/*
- * size_t
- * prune_origin(name, origin)
- *	Find out if the name is at or under the current origin.
- * return:
- *	Number of characters in name before start of origin,
- *	or length of name if origin does not match.
- * notes:
- *	This function should share code with samedomain().
- */
-static size_t
-prune_origin(const char *name, const char *origin) {
-	const char *oname = name;
-
-	while (*name != '\0') {
-		if (origin != NULL && strcasecmp(name, origin) == 0)
-			return (name - oname - (name > oname));
-		while (*name != '\0') {
-			if (*name == '\\') {
-				name++;
-				/* XXX need to handle \nnn form. */
-				if (*name == '\0')
-					break;
-			} else if (*name == '.') {
-				name++;
-				break;
-			}
-			name++;
-		}
-	}
-	return (name - oname);
-}
-
-/*
- * int
- * charstr(rdata, edata, buf, buflen)
- *	Format a <character-string> into the presentation buffer.
- * return:
- *	Number of rdata octets consumed
- *	0 for protocol format error
- *	-1 for output buffer error
- * side effects:
- *	buffer is advanced on success.
- */
-static int
-charstr(const u_char *rdata, const u_char *edata, char **buf, size_t *buflen) {
-	const u_char *odata = rdata;
-	size_t save_buflen = *buflen;
-	char *save_buf = *buf;
-
-	if (addstr("\"", 1, buf, buflen) < 0)
-		goto enospc;
-	if (rdata < edata) {
-		int n = *rdata;
-
-		if (rdata + 1 + n <= edata) {
-			rdata++;
-			while (n-- > 0) {
-				if (strchr("\n\"\\", *rdata) != NULL)
-					if (addstr("\\", 1, buf, buflen) < 0)
-						goto enospc;
-				if (addstr((const char *)rdata, 1,
-					   buf, buflen) < 0)
-					goto enospc;
-				rdata++;
-			}
-		}
-	}
-	if (addstr("\"", 1, buf, buflen) < 0)
-		goto enospc;
-	return (rdata - odata);
- enospc:
-	errno = ENOSPC;
-	*buf = save_buf;
-	*buflen = save_buflen;
-	return (-1);
-}
-
-static int
-addname(const u_char *msg, size_t msglen,
-	const u_char **pp, const char *origin,
-	char **buf, size_t *buflen)
-{
-	size_t newlen, save_buflen = *buflen;
-	char *save_buf = *buf;
-	int n;
-
-	n = dn_expand(msg, msg + msglen, *pp, *buf, *buflen);
-	if (n < 0)
-		goto enospc;	/* Guess. */
-	newlen = prune_origin(*buf, origin);
-	if ((origin == NULL || origin[0] == '\0' || (*buf)[newlen] == '\0') &&
-	    (newlen == 0 || (*buf)[newlen - 1] != '.')) {
-		/* No trailing dot. */
-		if (newlen + 2 > *buflen)
-			goto enospc;	/* No room for ".\0". */
-		(*buf)[newlen++] = '.';
-		(*buf)[newlen] = '\0';
-	}
-	if (newlen == 0) {
-		/* Use "@" instead of name. */
-		if (newlen + 2 > *buflen)
-			goto enospc;        /* No room for "@\0". */
-		(*buf)[newlen++] = '@';
-		(*buf)[newlen] = '\0';
-	}
-	*pp += n;
-	addlen(newlen, buf, buflen);
-	**buf = '\0';
-	return (newlen);
- enospc:
-	errno = ENOSPC;
-	*buf = save_buf;
-	*buflen = save_buflen;
-	return (-1);
-}
-
-static void
-addlen(size_t len, char **buf, size_t *buflen) {
-	assert(len <= *buflen);
-	*buf += len;
-	*buflen -= len;
-}
-
-static int
-addstr(const char *src, size_t len, char **buf, size_t *buflen) {
-	if (len > *buflen) {
-		errno = ENOSPC;
-		return (-1);
-	}
-	memcpy(*buf, src, len);
-	addlen(len, buf, buflen);
-	**buf = '\0';
-	return (0);
-}
-
-static int
-addtab(size_t len, size_t target, int spaced, char **buf, size_t *buflen) {
-	size_t save_buflen = *buflen;
-	char *save_buf = *buf;
-	int t;
-
-	if (spaced || len >= target - 1) {
-		T(addstr("  ", 2, buf, buflen));
-		spaced = 1;
-	} else {
-		for (t = (target - len - 1) / 8; t >= 0; t--)
-			if (addstr("\t", 1, buf, buflen) < 0) {
-				*buflen = save_buflen;
-				*buf = save_buf;
-				return (-1);
-			}
-		spaced = 0;
-	}
-	return (spaced);
-}
diff --git a/newlib/libc/sys/linux/net/ns_ttl.c b/newlib/libc/sys/linux/net/ns_ttl.c
deleted file mode 100644
index 63dbefb59..000000000
--- a/newlib/libc/sys/linux/net/ns_ttl.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* Import. */
-
-#include <arpa/nameser.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-
-#define SPRINTF(x) ((size_t)sprintf x)
-
-/* Forward. */
-
-static int	fmt1(int t, char s, char **buf, size_t *buflen);
-
-/* Macros. */
-
-#define T(x) if ((x) < 0) return (-1); else (void)NULL
-
-/* Public. */
-
-int
-ns_format_ttl(u_long src, char *dst, size_t dstlen) {
-	char *odst = dst;
-	int secs, mins, hours, days, weeks, x;
-	char *p;
-
-	secs = src % 60;   src /= 60;
-	mins = src % 60;   src /= 60;
-	hours = src % 24;  src /= 24;
-	days = src % 7;    src /= 7;
-	weeks = src;       src = 0;
-
-	x = 0;
-	if (weeks) {
-		T(fmt1(weeks, 'W', &dst, &dstlen));
-		x++;
-	}
-	if (days) {
-		T(fmt1(days, 'D', &dst, &dstlen));
-		x++;
-	}
-	if (hours) {
-		T(fmt1(hours, 'H', &dst, &dstlen));
-		x++;
-	}
-	if (mins) {
-		T(fmt1(mins, 'M', &dst, &dstlen));
-		x++;
-	}
-	if (secs || !(weeks || days || hours || mins)) {
-		T(fmt1(secs, 'S', &dst, &dstlen));
-		x++;
-	}
-
-	if (x > 1) {
-		int ch;
-
-		for (p = odst; (ch = *p) != '\0'; p++)
-			if (isascii(ch) && isupper(ch))
-				*p = tolower(ch);
-	}
-
-	return (dst - odst);
-}
-
-int
-ns_parse_ttl(const char *src, u_long *dst) {
-	u_long ttl, tmp;
-	int ch, digits, dirty;
-
-	ttl = 0;
-	tmp = 0;
-	digits = 0;
-	dirty = 0;
-	while ((ch = *src++) != '\0') {
-		if (!isascii(ch) || !isprint(ch))
-			goto einval;
-		if (isdigit(ch)) {
-			tmp *= 10;
-			tmp += (ch - '0');
-			digits++;
-			continue;
-		}
-		if (digits == 0)
-			goto einval;
-		if (islower(ch))
-			ch = toupper(ch);
-		switch (ch) {
-		case 'W':  tmp *= 7;
-		case 'D':  tmp *= 24;
-		case 'H':  tmp *= 60;
-		case 'M':  tmp *= 60;
-		case 'S':  break;
-		default:   goto einval;
-		}
-		ttl += tmp;
-		tmp = 0;
-		digits = 0;
-		dirty = 1;
-	}
-	if (digits > 0) {
-		if (dirty)
-			goto einval;
-		else
-			ttl += tmp;
-	}
-	*dst = ttl;
-	return (0);
-
- einval:
-	errno = EINVAL;
-	return (-1);
-}
-
-/* Private. */
-
-static int
-fmt1(int t, char s, char **buf, size_t *buflen) {
-	char tmp[50];
-	size_t len;
-
-	len = SPRINTF((tmp, "%d%c", t, s));
-	if (len + 1 > *buflen)
-		return (-1);
-	strcpy(*buf, tmp);
-	*buf += len;
-	*buflen -= len;
-	return (0);
-}
diff --git a/newlib/libc/sys/linux/net/nsap_addr.c b/newlib/libc/sys/linux/net/nsap_addr.c
deleted file mode 100644
index b6651488b..000000000
--- a/newlib/libc/sys/linux/net/nsap_addr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (c) 1996, 1998 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <ctype.h>
-#include <resolv.h>
-
-static char
-xtob(c)
-	int c;
-{
-	return (c - (((c >= '0') && (c <= '9')) ? '0' : '7'));
-}
-
-u_int
-inet_nsap_addr(ascii, binary, maxlen)
-	const char *ascii;
-	u_char *binary;
-	int maxlen;
-{
-	u_char c, nib;
-	u_int len = 0;
-
-	while ((c = *ascii++) != '\0' && len < (u_int)maxlen) {
-		if (c == '.' || c == '+' || c == '/')
-			continue;
-		if (!isascii(c))
-			return (0);
-		if (islower(c))
-			c = toupper(c);
-		if (isxdigit(c)) {
-			nib = xtob(c);
-			c = *ascii++;
-			if (c != '\0') {
-				c = toupper(c);
-				if (isxdigit(c)) {
-					*binary++ = (nib << 4) | xtob(c);
-					len++;
-				} else
-					return (0);
-			}
-			else
-				return (0);
-		}
-		else
-			return (0);
-	}
-	return (len);
-}
-
-char *
-inet_nsap_ntoa(binlen, binary, ascii)
-	int binlen;
-	const u_char *binary;
-	char *ascii;
-{
-	int nib;
-	int i;
-	static char tmpbuf[255*3];
-	char *start;
-
-	if (ascii)
-		start = ascii;
-	else {
-		ascii = tmpbuf;
-		start = tmpbuf;
-	}
-
-	if (binlen > 255)
-		binlen = 255;
-
-	for (i = 0; i < binlen; i++) {
-		nib = *binary >> 4;
-		*ascii++ = nib + (nib < 10 ? '0' : '7');
-		nib = *binary++ & 0x0f;
-		*ascii++ = nib + (nib < 10 ? '0' : '7');
-		if (((i % 2) == 0 && (i + 1) < binlen))
-			*ascii++ = '.';
-	}
-	*ascii = '\0';
-	return (start);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <arpa/inet.h>.
- */
-#undef inet_nsap_addr
-__weak_reference(__inet_nsap_addr, inet_nsap_addr);
-#undef inet_nsap_ntoa
-__weak_reference(__inet_nsap_ntoa, inet_nsap_ntoa);
diff --git a/newlib/libc/sys/linux/net/nsdispatch.3 b/newlib/libc/sys/linux/net/nsdispatch.3
deleted file mode 100644
index 708f97cba..000000000
--- a/newlib/libc/sys/linux/net/nsdispatch.3
+++ /dev/null
@@ -1,231 +0,0 @@
-.\"	$NetBSD: nsdispatch.3,v 1.8 1999/03/22 19:44:53 garbled Exp $
-.\"	$FreeBSD: src/lib/libc/net/nsdispatch.3,v 1.5 2001/10/01 16:08:56 ru Exp $
-.\"
-.\" Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
-.\" All rights reserved.
-.\"
-.\" This code is derived from software contributed to The NetBSD Foundation
-.\" by Luke Mewburn.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"        This product includes software developed by the NetBSD
-.\"        Foundation, Inc. and its contributors.
-.\" 4. Neither the name of The NetBSD Foundation nor the names of its
-.\"    contributors may be used to endorse or promote products derived
-.\"    from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.Dd January 19, 1999
-.Dt NSDISPATCH 3
-.Os
-.Sh NAME
-.Nm nsdispatch
-.Nd name-service switch dispatcher routine
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In nsswitch.h
-.Ft int
-.Fo nsdispatch
-.Fa "void *retval"
-.Fa "const ns_dtab dtab[]"
-.Fa "const char *database"
-.Fa "const char *method"
-.Fa "const ns_src defaults[]"
-.Fa "..."
-.Fc
-.Sh DESCRIPTION
-The
-.Fn nsdispatch
-function invokes the callback functions specified in
-.Va dtab
-in the order given in
-.Pa /etc/nsswitch.conf
-for the database
-.Va database
-until a successful entry is found.
-.Pp
-.Va retval
-is passed to each callback function to modify as necessary
-(to pass back to the caller of
-.Fn nsdispatch )
-.Pp
-.Va dtab
-is an array of
-.Va ns_dtab
-structures, which have the following format:
-.Bd -literal -offset indent
-typedef struct {
-	const char *src;
-	int (*cb)(void *retval, void *cb_data, va_list ap);
-	void *cb_data;
-} ns_dtab;
-.Ed
-.Pp
-.Bd -ragged -offset indent
-For each source type that is implemented, an entry with
-.Va src
-set to the name of the source,
-.Va cb
-defined as a function which handles that source, and
-.Va cb_data
-is used to pass arbritrary data to the callback function.
-The last entry in
-.Va dtab
-should contain
-.Dv NULL
-values for
-.Va src ,
-.Va cb ,
-and
-.Va cb_data .
-.Ed
-.Pp
-.Va method
-is usually the name of the function calling
-.Fn nsdispatch .
-When dynamic loading is supported, a symbol constructed from
-.Va database ,
-the current source, and
-.Va method
-will be used as the name to invoke the dynamically loaded function.
-.Pp
-.Va defaults
-contains a list of default sources to try in the case of
-a missing or corrupt
-.Xr nsswitch.conf 5 ,
-or if there isn't a relevant entry for
-.Va database .
-It is an array of
-.Va ns_src
-structures, which have the following format:
-.Bd -literal -offset indent
-typedef struct {
-	const char *src;
-	u_int32_t flags;
-} ns_src;
-.Ed
-.Pp
-.Bd -ragged -offset indent
-For each default source type, an entry with
-.Va src
-set to the name of the source, and
-.Va flags
-set to the relevant flags
-(usually
-.Dv NS_SUCCESS ;
-refer to
-.Sx Callback return values
-for more information).
-The last entry in
-.Va defaults
-should have
-.Va src
-set to
-.Dv NULL
-and
-.Va flags
-set to 0.
-.Pp
-For convenience, a global variable defined as:
-.Dl extern const ns_src __nsdefaultsrc[];
-exists which contains a single default entry for
-.Sq files
-for use by callers which don't require complicated default rules.
-.Ed
-.Pp
-.Sq Va ...
-are optional extra arguments, which
-are passed to the appropriate callback function as a variable argument
-list of the type
-.Va va_list .
-.Ss Valid source types
-Whilst there is support for arbitrary sources, the following
-#defines for commonly implementated sources are available:
-.Bl -column NS_COMPAT COMPAT -offset indent
-.It Sy "#define	value"
-.It "NSSRC_FILES	""files"""
-.It "NSSRC_DNS	""dns"""
-.It "NSSRC_NIS	""nis"""
-.It "NSSRC_COMPAT	""compat"""
-.El
-.Pp
-Refer to
-.Xr nsswitch.conf 5
-for a complete description of what each source type is.
-.Pp
-.Ss Callback return values
-The callback functions should return one of the following values
-depending upon status of the lookup:
-.Bl -column NS_NOTFOUND -offset indent
-.It Sy "Return value	Status code"
-.It "NS_SUCCESS	success"
-.It "NS_NOTFOUND	notfound"
-.It "NS_UNAVAIL	unavail"
-.It "NS_TRYAGAIN	tryagain"
-.El
-.Pp
-Refer to
-.Xr nsswitch.conf 5
-for a complete description of what each status code is.
-.Pp
-.Nm
-returns the value of the callback that caused the dispatcher to finish,
-or NS_NOTFOUND otherwise.
-.Sh SEE ALSO
-.Xr hesiod 3 ,
-.Xr stdarg 3 ,
-.Xr ypclnt 3 ,
-.Xr nsswitch.conf 5
-.Sh HISTORY
-The
-.Nm
-routines first appeared in
-.Fx 4.1 .
-They were imported from the
-.Nx
-Project,
-where they appeared first in
-.Nx 1.4 .
-.Sh AUTHORS
-Luke Mewburn
-.Aq lukem@netbsd.org
-wrote this freely distributable name-service switch implementation,
-using ideas from the
-.Tn ULTRIX
-.Xr svc.conf 5
-and
-.Tn Solaris
-.Xr nsswitch.conf 4
-manual pages.
-.Sh BUGS
-The
-.Nm
-routines are not thread safe.
-This will be rectified in the future.
-.Pp
-Currently there is no support for dynamically loadable dispatcher callback
-functions.
-It is anticipated that this will be added in the future in the back-end
-without requiring changes to code that invokes
-.Fn nsdispatch .
diff --git a/newlib/libc/sys/linux/net/nsdispatch.c b/newlib/libc/sys/linux/net/nsdispatch.c
deleted file mode 100644
index ea5fc6d4b..000000000
--- a/newlib/libc/sys/linux/net/nsdispatch.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*	$NetBSD: nsdispatch.c,v 1.9 1999/01/25 00:16:17 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-
-#include <fcntl.h>
-#define _NS_PRIVATE
-#include <nsswitch.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-/*
- * default sourcelist: `files'
- */
-const ns_src __nsdefaultsrc[] = {
-	{ NSSRC_FILES, NS_SUCCESS },
-	{ 0 },
-};
-
-
-static	int			 _nsmapsize = 0;
-static	ns_dbt			*_nsmap = NULL;
-
-/*
- * size of dynamic array chunk for _nsmap and _nsmap[x].srclist
- */
-#define NSELEMSPERCHUNK		8
-
-
-int	_nscmp(const void *, const void *);
-
-
-int
-_nscmp(a, b)
-	const void *a;
-	const void *b;
-{
-	return (strcasecmp(((const ns_dbt *)a)->name,
-	    ((const ns_dbt *)b)->name));
-}
-
-
-void
-_nsdbtaddsrc(dbt, src)
-	ns_dbt		*dbt;
-	const ns_src	*src;
-{
-	if ((dbt->srclistsize % NSELEMSPERCHUNK) == 0) {
-		dbt->srclist = (ns_src *)realloc(dbt->srclist,
-		    (dbt->srclistsize + NSELEMSPERCHUNK) * sizeof(ns_src));
-		if (dbt->srclist == NULL)
-			printf("nsdispatch: memory allocation failure\n");
-	}
-	memmove(&dbt->srclist[dbt->srclistsize++], src, sizeof(ns_src));
-}
-
-
-void
-_nsdbtdump(dbt)
-	const ns_dbt *dbt;
-{
-	int i;
-
-	printf("%s (%d source%s):", dbt->name, dbt->srclistsize,
-	    dbt->srclistsize == 1 ? "" : "s");
-	for (i = 0; i < dbt->srclistsize; i++) {
-		printf(" %s", dbt->srclist[i].name);
-		if (!(dbt->srclist[i].flags &
-		    (NS_UNAVAIL|NS_NOTFOUND|NS_TRYAGAIN)) &&
-		    (dbt->srclist[i].flags & NS_SUCCESS))
-			continue;
-		printf(" [");
-		if (!(dbt->srclist[i].flags & NS_SUCCESS))
-			printf(" SUCCESS=continue");
-		if (dbt->srclist[i].flags & NS_UNAVAIL)
-			printf(" UNAVAIL=return");
-		if (dbt->srclist[i].flags & NS_NOTFOUND)
-			printf(" NOTFOUND=return");
-		if (dbt->srclist[i].flags & NS_TRYAGAIN)
-			printf(" TRYAGAIN=return");
-		printf(" ]");
-	}
-	printf("\n");
-}
-
-
-const ns_dbt *
-_nsdbtget(name)
-	const char	*name;
-{
-	static	time_t	 confmod;
-
-	struct stat	 statbuf;
-	ns_dbt		 dbt;
-
-	extern	FILE 	*_nsyyin;
-	extern	int	 _nsyyparse(void);
-
-	dbt.name = name;
-
-	if (confmod) {
-		if (stat(_PATH_NS_CONF, &statbuf) == -1)
-			return (NULL);
-		if (confmod < statbuf.st_mtime) {
-			int i, j;
-
-			for (i = 0; i < _nsmapsize; i++) {
-				for (j = 0; j < _nsmap[i].srclistsize; j++) {
-					if (_nsmap[i].srclist[j].name != NULL) {
-						/*LINTED const cast*/
-						free((void *)
-						    _nsmap[i].srclist[j].name);
-					}
-				}
-				if (_nsmap[i].srclist)
-					free(_nsmap[i].srclist);
-				if (_nsmap[i].name) {
-					/*LINTED const cast*/
-					free((void *)_nsmap[i].name);
-				}
-			}
-			if (_nsmap)
-				free(_nsmap);
-			_nsmap = NULL;
-			_nsmapsize = 0;
-			confmod = 0;
-		}
-	}
-	if (!confmod) {
-		if (stat(_PATH_NS_CONF, &statbuf) == -1)
-			return (NULL);
-		_nsyyin = fopen(_PATH_NS_CONF, "r");
-		if (_nsyyin == NULL)
-			return (NULL);
-		_nsyyparse();
-		(void)fclose(_nsyyin);
-		qsort(_nsmap, (size_t)_nsmapsize, sizeof(ns_dbt), _nscmp);
-		confmod = statbuf.st_mtime;
-	}
-	return (bsearch(&dbt, _nsmap, (size_t)_nsmapsize, sizeof(ns_dbt),
-	    _nscmp));
-}
-
-
-void
-_nsdbtput(dbt)
-	const ns_dbt *dbt;
-{
-	int	i;
-
-	for (i = 0; i < _nsmapsize; i++) {
-		if (_nscmp(dbt, &_nsmap[i]) == 0) {
-					/* overwrite existing entry */
-			if (_nsmap[i].srclist != NULL)
-				free(_nsmap[i].srclist);
-			memmove(&_nsmap[i], dbt, sizeof(ns_dbt));
-			return;
-		}
-	}
-
-	if ((_nsmapsize % NSELEMSPERCHUNK) == 0) {
-		_nsmap = (ns_dbt *)realloc(_nsmap,
-		    (_nsmapsize + NSELEMSPERCHUNK) * sizeof(ns_dbt));
-		if (_nsmap == NULL)
-			printf("nsdispatch: memory allocation failure\n");
-	}
-	memmove(&_nsmap[_nsmapsize++], dbt, sizeof(ns_dbt));
-}
-
-
-int
-#if __STDC__
-nsdispatch(void *retval, const ns_dtab disp_tab[], const char *database,
-	    const char *method, const ns_src defaults[], ...)
-#else
-nsdispatch(retval, disp_tab, database, method, defaults, va_alist)
-	void		*retval;
-	const ns_dtab	 disp_tab[];
-	const char	*database;
-	const char	*method;
-	const ns_src	 defaults[];
-	va_dcl
-#endif
-{
-	va_list		 ap;
-	int		 i, curdisp, result;
-	const ns_dbt	*dbt;
-	const ns_src	*srclist;
-	int		 srclistsize;
-
-	dbt = _nsdbtget(database);
-	if (dbt != NULL) {
-		srclist = dbt->srclist;
-		srclistsize = dbt->srclistsize;
-	} else {
-		srclist = defaults;
-		srclistsize = 0;
-		while (srclist[srclistsize].name != NULL)
-			srclistsize++;
-	}
-	result = 0;
-
-	for (i = 0; i < srclistsize; i++) {
-		for (curdisp = 0; disp_tab[curdisp].src != NULL; curdisp++)
-			if (strcasecmp(disp_tab[curdisp].src,
-			    srclist[i].name) == 0)
-				break;
-		result = 0;
-		if (disp_tab[curdisp].callback) {
-#if __STDC__
-			va_start(ap, defaults);
-#else
-			va_start(ap);
-#endif
-			result = disp_tab[curdisp].callback(retval,
-			    disp_tab[curdisp].cb_data, ap);
-			va_end(ap);
-			if (result & srclist[i].flags) {
-				break;
-			}
-		}
-	}
-	return (result ? result : NS_NOTFOUND);
-}
diff --git a/newlib/libc/sys/linux/net/nslexer.c b/newlib/libc/sys/linux/net/nslexer.c
deleted file mode 100644
index 3f6ba4dcd..000000000
--- a/newlib/libc/sys/linux/net/nslexer.c
+++ /dev/null
@@ -1,1712 +0,0 @@
-#define yy_create_buffer _nsyy_create_buffer
-#define yy_delete_buffer _nsyy_delete_buffer
-#define yy_scan_buffer _nsyy_scan_buffer
-#define yy_scan_string _nsyy_scan_string
-#define yy_scan_bytes _nsyy_scan_bytes
-#define yy_flex_debug _nsyy_flex_debug
-#define yy_init_buffer _nsyy_init_buffer
-#define yy_flush_buffer _nsyy_flush_buffer
-#define yy_load_buffer_state _nsyy_load_buffer_state
-#define yy_switch_to_buffer _nsyy_switch_to_buffer
-#define yyin _nsyyin
-#define yyleng _nsyyleng
-#define yylex _nsyylex
-#define yyout _nsyyout
-#define yyrestart _nsyyrestart
-#define yytext _nsyytext
-#define yylineno _nsyylineno
-#define yywrap _nsyywrap
-
-/* A lexical scanner generated by flex */
-
-/* Scanner skeleton version:
- * $Header$
- */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-
-#include <stdio.h>
-#include <unistd.h>
-
-
-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
-#ifdef c_plusplus
-#ifndef __cplusplus
-#define __cplusplus
-#endif
-#endif
-
-
-#ifdef __cplusplus
-
-#include <stdlib.h>
-
-/* Use prototypes in function declarations. */
-#define YY_USE_PROTOS
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else	/* ! __cplusplus */
-
-#if __STDC__
-
-#define YY_USE_PROTOS
-#define YY_USE_CONST
-
-#endif	/* __STDC__ */
-#endif	/* ! __cplusplus */
-
-#ifdef __TURBOC__
- #pragma warn -rch
- #pragma warn -use
-#include <io.h>
-#include <stdlib.h>
-#define YY_USE_CONST
-#define YY_USE_PROTOS
-#endif
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-
-#ifdef YY_USE_PROTOS
-#define YY_PROTO(proto) proto
-#else
-#define YY_PROTO(proto) ()
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index.  If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition.  This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN yy_start = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state.  The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START ((yy_start - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart( yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#define YY_BUF_SIZE 1024
-
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-
-extern int yyleng;
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
-/* The funky do-while in the following #define is used to turn the definition
- * int a single C statement (which needs a semi-colon terminator).  This
- * avoids problems with code like:
- *
- * 	if ( condition_holds )
- *		yyless( 5 );
- *	else
- *		do_something_else();
- *
- * Prior to using the do-while the compiler would get upset at the
- * "else" because it interpreted the "if" statement as being all
- * done when it reached the ';' after the yyless() call.
- */
-
-/* Return all but the first 'n' matched characters back to the input stream. */
-
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		*yy_cp = yy_hold_char; \
-		YY_RESTORE_YY_MORE_OFFSET \
-		yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
-		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
-		} \
-	while ( 0 )
-
-#define unput(c) yyunput( c, yytext_ptr )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-typedef unsigned int yy_size_t;
-
-
-struct yy_buffer_state
-	{
-	FILE *yy_input_file;
-
-	char *yy_ch_buf;		/* input buffer */
-	char *yy_buf_pos;		/* current position in input buffer */
-
-	/* Size of input buffer in bytes, not including room for EOB
-	 * characters.
-	 */
-	yy_size_t yy_buf_size;
-
-	/* Number of characters read into yy_ch_buf, not including EOB
-	 * characters.
-	 */
-	int yy_n_chars;
-
-	/* Whether we "own" the buffer - i.e., we know we created it,
-	 * and can realloc() it to grow it, and should free() it to
-	 * delete it.
-	 */
-	int yy_is_our_buffer;
-
-	/* Whether this is an "interactive" input source; if so, and
-	 * if we're using stdio for input, then we want to use getc()
-	 * instead of fread(), to make sure we stop fetching input after
-	 * each newline.
-	 */
-	int yy_is_interactive;
-
-	/* Whether we're considered to be at the beginning of a line.
-	 * If so, '^' rules will be active on the next match, otherwise
-	 * not.
-	 */
-	int yy_at_bol;
-
-	/* Whether to try to fill the input buffer when we reach the
-	 * end of it.
-	 */
-	int yy_fill_buffer;
-
-	int yy_buffer_status;
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
-	/* When an EOF's been seen but there's still some text to process
-	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
-	 * shouldn't try reading from the input source any more.  We might
-	 * still have a bunch of tokens to match, though, because of
-	 * possible backing-up.
-	 *
-	 * When we actually see the EOF, we change the status to "new"
-	 * (via yyrestart()), so that the user can continue scanning by
-	 * just pointing yyin at a new input file.
-	 */
-#define YY_BUFFER_EOF_PENDING 2
-	};
-
-static YY_BUFFER_STATE yy_current_buffer = 0;
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- */
-#define YY_CURRENT_BUFFER yy_current_buffer
-
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-
-static int yy_n_chars;		/* number of characters read into yy_ch_buf */
-
-
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 1;		/* whether we need to initialize */
-static int yy_start = 0;	/* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin.  A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart YY_PROTO(( FILE *input_file ));
-
-void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
-void yy_load_buffer_state YY_PROTO(( void ));
-YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
-void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
-void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
-
-YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
-YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
-YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
-
-static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
-static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
-static void yy_flex_free YY_PROTO(( void * ));
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_is_interactive = is_interactive; \
-	}
-
-#define yy_set_bol(at_bol) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_at_bol = at_bol; \
-	}
-
-#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
-
-
-#define YY_USES_REJECT
-typedef unsigned char YY_CHAR;
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-typedef int yy_state_type;
-extern int yylineno;
-int yylineno = 1;
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state YY_PROTO(( void ));
-static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
-static int yy_get_next_buffer YY_PROTO(( void ));
-static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
-	yytext_ptr = yy_bp; \
-	yyleng = (int) (yy_cp - yy_bp); \
-	yy_hold_char = *yy_cp; \
-	*yy_cp = '\0'; \
-	yy_c_buf_p = yy_cp;
-
-#define YY_NUM_RULES 13
-#define YY_END_OF_BUFFER 14
-static yyconst short int yy_acclist[83] =
-    {   0,
-       14,   12,   13,    1,   12,   13,    4,   13,    2,   12,
-       13,   11,   12,   13,   11,   12,   13,   11,   12,   13,
-       11,   12,   13,   11,   12,   13,   11,   12,   13,   11,
-       12,   13,   12,   13,    1,    2,   11,   11,   11,   11,
-       11,   11,   11,    3,   11,   11,   11,   11,   11,   11,
-       11,   11,   11,   11,   11,   11,   11,   11,   11,   11,
-       11,   11,   11,   11,    9,   11,   11,   11,   11,   11,
-       11,    5,   11,   11,    6,   11,   10,   11,    7,   11,
-        8,   11
-    } ;
-
-static yyconst short int yy_accept[60] =
-    {   0,
-        1,    1,    1,    2,    4,    7,    9,   12,   15,   18,
-       21,   24,   27,   30,   33,   35,   36,   37,   38,   39,
-       40,   41,   42,   43,   44,   45,   46,   47,   48,   49,
-       50,   51,   52,   53,   54,   55,   56,   57,   58,   59,
-       60,   61,   62,   63,   64,   65,   67,   68,   69,   70,
-       71,   72,   74,   75,   77,   79,   81,   83,   83
-    } ;
-
-static yyconst int yy_ec[256] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    2,    1,    1,    4,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    5,    5,    5,
-        5,    5,    5,    5,    5,    5,    5,    1,    1,    1,
-        1,    1,    1,    1,    6,    7,    8,    9,   10,   11,
-       12,    7,   13,    7,    7,   14,    7,   15,   16,    7,
-        7,   17,   18,   19,   20,   21,    7,    7,   22,    7,
-        1,   23,    1,    1,    5,    1,    6,    7,    8,    9,
-
-       10,   11,   12,    7,   13,    7,    7,   14,    7,   15,
-       16,    7,    7,   17,   18,   19,   20,   21,    7,    7,
-       22,    7,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst int yy_meta[24] =
-    {   0,
-        1,    1,    2,    1,    3,    3,    3,    3,    3,    3,
-        3,    3,    3,    3,    3,    3,    3,    3,    3,    3,
-        3,    3,    1
-    } ;
-
-static yyconst short int yy_base[61] =
-    {   0,
-        0,    0,   68,   69,   65,   69,    0,    0,   50,   49,
-       54,   43,   45,   46,   57,   57,    0,    0,   43,   38,
-       37,   47,   32,   47,   69,   33,   40,   30,   41,   42,
-       26,   33,   29,   27,   33,   30,   35,   25,   19,   23,
-       19,   30,   22,   14,   18,    0,   14,   18,   16,   19,
-       19,    0,   12,    0,    0,    0,    0,   69,   23,   22
-    } ;
-
-static yyconst short int yy_def[61] =
-    {   0,
-       58,    1,   58,   58,   58,   58,   59,   60,   60,   60,
-       60,   60,   60,   60,   58,   58,   59,   60,   60,   60,
-       60,   60,   60,   60,   58,   60,   60,   60,   60,   60,
-       60,   60,   60,   60,   60,   60,   60,   60,   60,   60,
-       60,   60,   60,   60,   60,   60,   60,   60,   60,   60,
-       60,   60,   60,   60,   60,   60,   60,    0,   58,   58
-    } ;
-
-static yyconst short int yy_nxt[93] =
-    {   0,
-        4,    5,    6,    7,    4,    8,    8,    9,    8,    8,
-        8,    8,    8,    8,   10,    8,   11,   12,   13,   14,
-        8,    8,   15,   17,   18,   17,   57,   56,   55,   54,
-       53,   52,   51,   50,   49,   48,   47,   46,   45,   44,
-       43,   42,   41,   40,   39,   38,   37,   36,   35,   34,
-       33,   32,   31,   30,   29,   28,   27,   26,   16,   25,
-       24,   23,   22,   21,   20,   19,   16,   58,    3,   58,
-       58,   58,   58,   58,   58,   58,   58,   58,   58,   58,
-       58,   58,   58,   58,   58,   58,   58,   58,   58,   58,
-       58,   58
-
-    } ;
-
-static yyconst short int yy_chk[93] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,   59,   60,   59,   53,   51,   50,   49,
-       48,   47,   45,   44,   43,   42,   41,   40,   39,   38,
-       37,   36,   35,   34,   33,   32,   31,   30,   29,   28,
-       27,   26,   24,   23,   22,   21,   20,   19,   16,   15,
-       14,   13,   12,   11,   10,    9,    5,    3,   58,   58,
-       58,   58,   58,   58,   58,   58,   58,   58,   58,   58,
-       58,   58,   58,   58,   58,   58,   58,   58,   58,   58,
-       58,   58
-
-    } ;
-
-static yy_state_type yy_state_buf[YY_BUF_SIZE + 2], *yy_state_ptr;
-static char *yy_full_match;
-static int yy_lp;
-#define REJECT \
-{ \
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */ \
-yy_cp = yy_full_match; /* restore poss. backed-over text */ \
-++yy_lp; \
-goto find_rule; \
-}
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "nslexer.l"
-#define INITIAL 0
-#line 2 "nslexer.l"
-/*	$NetBSD: nslexer.l,v 1.3 1999/01/25 00:16:17 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <sys/cdefs.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = 
-  "$FreeBSD: src/lib/libc/net/nslexer.l,v 1.3 2001/11/11 02:48:09 bde Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <ctype.h>
-#define _NS_PRIVATE
-#include <nsswitch.h>
-#include <string.h>
-
-#include "nsparser.h"
-
-#define YY_NO_UNPUT
-
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap YY_PROTO(( void ));
-#else
-extern int yywrap YY_PROTO(( void ));
-#endif
-#endif
-
-#ifndef YY_NO_UNPUT
-static void yyunput YY_PROTO(( int c, char *buf_ptr ));
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen YY_PROTO(( yyconst char * ));
-#endif
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
-static int yyinput YY_PROTO(( void ));
-#else
-static int input YY_PROTO(( void ));
-#endif
-#endif
-
-#if YY_STACK_USED
-static int yy_start_stack_ptr = 0;
-static int yy_start_stack_depth = 0;
-static int *yy_start_stack = 0;
-#ifndef YY_NO_PUSH_STATE
-static void yy_push_state YY_PROTO(( int new_state ));
-#endif
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state YY_PROTO(( void ));
-#endif
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state YY_PROTO(( void ));
-#endif
-
-#else
-#define YY_NO_PUSH_STATE 1
-#define YY_NO_POP_STATE 1
-#define YY_NO_TOP_STATE 1
-#endif
-
-#ifdef YY_MALLOC_DECL
-YY_MALLOC_DECL
-#else
-#if __STDC__
-#ifndef __cplusplus
-#include <stdlib.h>
-#endif
-#else
-/* Just try to get by without declaring the routines.  This will fail
- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
- * or sizeof(void*) != sizeof(int).
- */
-#endif
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
-	if ( yy_current_buffer->yy_is_interactive ) \
-		{ \
-		int c = '*', n; \
-		for ( n = 0; n < max_size && \
-			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
-			buf[n] = (char) c; \
-		if ( c == '\n' ) \
-			buf[n++] = (char) c; \
-		if ( c == EOF && ferror( yyin ) ) \
-			YY_FATAL_ERROR( "input in flex scanner failed" ); \
-		result = n; \
-		} \
-	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
-		  && ferror( yyin ) ) \
-		YY_FATAL_ERROR( "input in flex scanner failed" );
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL int yylex YY_PROTO(( void ))
-#endif
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
-	YY_USER_ACTION
-
-YY_DECL
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp = NULL, *yy_bp = NULL;
-	register int yy_act;
-
-#line 65 "nslexer.l"
-
-
-
-	if ( yy_init )
-		{
-		yy_init = 0;
-
-#ifdef YY_USER_INIT
-		YY_USER_INIT;
-#endif
-
-		if ( ! yy_start )
-			yy_start = 1;	/* first start state */
-
-		if ( ! yyin )
-			yyin = stdin;
-
-		if ( ! yyout )
-			yyout = stdout;
-
-		if ( ! yy_current_buffer )
-			yy_current_buffer =
-				yy_create_buffer( yyin, YY_BUF_SIZE );
-
-		yy_load_buffer_state();
-		}
-
-	while ( 1 )		/* loops until end-of-file is reached */
-		{
-		yy_cp = yy_c_buf_p;
-
-		/* Support of yytext. */
-		*yy_cp = yy_hold_char;
-
-		/* yy_bp points to the position in yy_ch_buf of the start of
-		 * the current run.
-		 */
-		yy_bp = yy_cp;
-
-		yy_current_state = yy_start;
-		yy_state_ptr = yy_state_buf;
-		*yy_state_ptr++ = yy_current_state;
-yy_match:
-		do
-			{
-			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
-			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-				{
-				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 59 )
-					yy_c = yy_meta[(unsigned int) yy_c];
-				}
-			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-			*yy_state_ptr++ = yy_current_state;
-			++yy_cp;
-			}
-		while ( yy_base[yy_current_state] != 69 );
-
-yy_find_action:
-		yy_current_state = *--yy_state_ptr;
-		yy_lp = yy_accept[yy_current_state];
-find_rule: /* we branch to this label when backing up */
-		for ( ; ; ) /* until we find what rule we matched */
-			{
-			if ( yy_lp && yy_lp < yy_accept[yy_current_state + 1] )
-				{
-				yy_act = yy_acclist[yy_lp];
-					{
-					yy_full_match = yy_cp;
-					break;
-					}
-				}
-			--yy_cp;
-			yy_current_state = *--yy_state_ptr;
-			yy_lp = yy_accept[yy_current_state];
-			}
-
-		YY_DO_BEFORE_ACTION;
-
-		if ( yy_act != YY_END_OF_BUFFER )
-			{
-			int yyl;
-			for ( yyl = 0; yyl < yyleng; ++yyl )
-				if ( yytext[yyl] == '\n' )
-					++yylineno;
-			}
-
-do_action:	/* This label is used only to access EOF actions. */
-
-
-		switch ( yy_act )
-	{ /* beginning of action switch */
-case 1:
-YY_RULE_SETUP
-#line 67 "nslexer.l"
-;			/* skip whitespace */
-	YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 69 "nslexer.l"
-;			/* skip comments */
-	YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 71 "nslexer.l"
-;			/* allow continuation */
-	YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 73 "nslexer.l"
-return NL;
-	YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 75 "nslexer.l"
-return SUCCESS;
-	YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 76 "nslexer.l"
-return UNAVAIL;
-	YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 77 "nslexer.l"
-return NOTFOUND;
-	YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 78 "nslexer.l"
-return TRYAGAIN;
-	YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 80 "nslexer.l"
-return RETURN;
-	YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 81 "nslexer.l"
-return CONTINUE;
-	YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 83 "nslexer.l"
-{
-			char *p;
-			int i;
-			size_t len;
-
-			len = strlen (yytext) + 1;
-			if ((p = malloc (len)) == NULL)
-				    printf("nsdispatch: memory allocation failure\n");
-			else
-				memcpy (p, yytext, len);
-
-			for (i = 0; i < strlen(p); i++) {
-				if (isupper((unsigned char)p[i]))
-					p[i] = tolower((unsigned char)p[i]);
-			}
-			_nsyylval.str = p;
-			return STRING;
-		}
-	YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 99 "nslexer.l"
-return yytext[0];
-	YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 101 "nslexer.l"
-ECHO;
-	YY_BREAK
-			case YY_STATE_EOF(INITIAL):
-				yyterminate();
-
-	case YY_END_OF_BUFFER:
-		{
-		/* Amount of text matched not including the EOB char. */
-		int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
-
-		/* Undo the effects of YY_DO_BEFORE_ACTION. */
-		*yy_cp = yy_hold_char;
-		YY_RESTORE_YY_MORE_OFFSET
-
-		if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
-			{
-			/* We're scanning a new file or input source.  It's
-			 * possible that this happened because the user
-			 * just pointed yyin at a new source and called
-			 * yylex().  If so, then we have to assure
-			 * consistency between yy_current_buffer and our
-			 * globals.  Here is the right place to do so, because
-			 * this is the first action (other than possibly a
-			 * back-up) that will match for the new input source.
-			 */
-			yy_n_chars = yy_current_buffer->yy_n_chars;
-			yy_current_buffer->yy_input_file = yyin;
-			yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
-			}
-
-		/* Note that here we test for yy_c_buf_p "<=" to the position
-		 * of the first EOB in the buffer, since yy_c_buf_p will
-		 * already have been incremented past the NUL character
-		 * (since all states make transitions on EOB to the
-		 * end-of-buffer state).  Contrast this with the test
-		 * in input().
-		 */
-		if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			{ /* This was really a NUL. */
-			yy_state_type yy_next_state;
-
-			yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
-
-			yy_current_state = yy_get_previous_state();
-
-			/* Okay, we're now positioned to make the NUL
-			 * transition.  We couldn't have
-			 * yy_get_previous_state() go ahead and do it
-			 * for us because it doesn't know how to deal
-			 * with the possibility of jamming (and we don't
-			 * want to build jamming into it because then it
-			 * will run more slowly).
-			 */
-
-			yy_next_state = yy_try_NUL_trans( yy_current_state );
-
-			yy_bp = yytext_ptr + YY_MORE_ADJ;
-
-			if ( yy_next_state )
-				{
-				/* Consume the NUL. */
-				yy_cp = ++yy_c_buf_p;
-				yy_current_state = yy_next_state;
-				goto yy_match;
-				}
-
-			else
-				{
-				yy_cp = yy_c_buf_p;
-				goto yy_find_action;
-				}
-			}
-
-		else switch ( yy_get_next_buffer() )
-			{
-			case EOB_ACT_END_OF_FILE:
-				{
-				yy_did_buffer_switch_on_eof = 0;
-
-				if ( yywrap() )
-					{
-					/* Note: because we've taken care in
-					 * yy_get_next_buffer() to have set up
-					 * yytext, we can now set up
-					 * yy_c_buf_p so that if some total
-					 * hoser (like flex itself) wants to
-					 * call the scanner after we return the
-					 * YY_NULL, it'll still work - another
-					 * YY_NULL will get returned.
-					 */
-					yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
-
-					yy_act = YY_STATE_EOF(YY_START);
-					goto do_action;
-					}
-
-				else
-					{
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-					}
-				break;
-				}
-
-			case EOB_ACT_CONTINUE_SCAN:
-				yy_c_buf_p =
-					yytext_ptr + yy_amount_of_matched_text;
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_match;
-
-			case EOB_ACT_LAST_MATCH:
-				yy_c_buf_p =
-				&yy_current_buffer->yy_ch_buf[yy_n_chars];
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_find_action;
-			}
-		break;
-		}
-
-	default:
-		YY_FATAL_ERROR(
-			"fatal flex scanner internal error--no action found" );
-	} /* end of action switch */
-		} /* end of scanning one token */
-	} /* end of yylex */
-
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- *	EOB_ACT_LAST_MATCH -
- *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- *	EOB_ACT_END_OF_FILE - end of file
- */
-
-static int yy_get_next_buffer()
-	{
-	register char *dest = yy_current_buffer->yy_ch_buf;
-	register char *source = yytext_ptr;
-	register int number_to_move, i;
-	int ret_val;
-
-	if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
-		YY_FATAL_ERROR(
-		"fatal flex scanner internal error--end of buffer missed" );
-
-	if ( yy_current_buffer->yy_fill_buffer == 0 )
-		{ /* Don't try to fill the buffer, so this is an EOF. */
-		if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
-			{
-			/* We matched a single character, the EOB, so
-			 * treat this as a final EOF.
-			 */
-			return EOB_ACT_END_OF_FILE;
-			}
-
-		else
-			{
-			/* We matched some text prior to the EOB, first
-			 * process it.
-			 */
-			return EOB_ACT_LAST_MATCH;
-			}
-		}
-
-	/* Try to read more data. */
-
-	/* First move last chars to start of buffer. */
-	number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
-
-	for ( i = 0; i < number_to_move; ++i )
-		*(dest++) = *(source++);
-
-	if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
-		/* don't do the read, it's not guaranteed to return an EOF,
-		 * just force an EOF
-		 */
-		yy_current_buffer->yy_n_chars = yy_n_chars = 0;
-
-	else
-		{
-		int num_to_read =
-			yy_current_buffer->yy_buf_size - number_to_move - 1;
-
-		while ( num_to_read <= 0 )
-			{ /* Not enough room in the buffer - grow it. */
-#ifdef YY_USES_REJECT
-			YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-#else
-
-			/* just a shorter name for the current buffer */
-			YY_BUFFER_STATE b = yy_current_buffer;
-
-			int yy_c_buf_p_offset =
-				(int) (yy_c_buf_p - b->yy_ch_buf);
-
-			if ( b->yy_is_our_buffer )
-				{
-				int new_size = b->yy_buf_size * 2;
-
-				if ( new_size <= 0 )
-					b->yy_buf_size += b->yy_buf_size / 8;
-				else
-					b->yy_buf_size *= 2;
-
-				b->yy_ch_buf = (char *)
-					/* Include room in for 2 EOB chars. */
-					yy_flex_realloc( (void *) b->yy_ch_buf,
-							 b->yy_buf_size + 2 );
-				}
-			else
-				/* Can't grow it, we don't own it. */
-				b->yy_ch_buf = 0;
-
-			if ( ! b->yy_ch_buf )
-				YY_FATAL_ERROR(
-				"fatal error - scanner input buffer overflow" );
-
-			yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
-
-			num_to_read = yy_current_buffer->yy_buf_size -
-						number_to_move - 1;
-#endif
-			}
-
-		if ( num_to_read > YY_READ_BUF_SIZE )
-			num_to_read = YY_READ_BUF_SIZE;
-
-		/* Read in more data. */
-		YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
-			yy_n_chars, num_to_read );
-
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	if ( yy_n_chars == 0 )
-		{
-		if ( number_to_move == YY_MORE_ADJ )
-			{
-			ret_val = EOB_ACT_END_OF_FILE;
-			yyrestart( yyin );
-			}
-
-		else
-			{
-			ret_val = EOB_ACT_LAST_MATCH;
-			yy_current_buffer->yy_buffer_status =
-				YY_BUFFER_EOF_PENDING;
-			}
-		}
-
-	else
-		ret_val = EOB_ACT_CONTINUE_SCAN;
-
-	yy_n_chars += number_to_move;
-	yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
-	yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
-
-	yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
-
-	return ret_val;
-	}
-
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
-static yy_state_type yy_get_previous_state()
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp;
-
-	yy_current_state = yy_start;
-	yy_state_ptr = yy_state_buf;
-	*yy_state_ptr++ = yy_current_state;
-
-	for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
-		{
-		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
-		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-			{
-			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 59 )
-				yy_c = yy_meta[(unsigned int) yy_c];
-			}
-		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-		*yy_state_ptr++ = yy_current_state;
-		}
-
-	return yy_current_state;
-	}
-
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- *	next_state = yy_try_NUL_trans( current_state );
- */
-
-#ifdef YY_USE_PROTOS
-static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
-#else
-static yy_state_type yy_try_NUL_trans( yy_current_state )
-yy_state_type yy_current_state;
-#endif
-	{
-	register int yy_is_jam;
-
-	register YY_CHAR yy_c = 1;
-	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-		{
-		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 59 )
-			yy_c = yy_meta[(unsigned int) yy_c];
-		}
-	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 58);
-	if ( ! yy_is_jam )
-		*yy_state_ptr++ = yy_current_state;
-
-	return yy_is_jam ? 0 : yy_current_state;
-	}
-
-
-#ifndef YY_NO_UNPUT
-#ifdef YY_USE_PROTOS
-static void yyunput( int c, register char *yy_bp )
-#else
-static void yyunput( c, yy_bp )
-int c;
-register char *yy_bp;
-#endif
-	{
-	register char *yy_cp = yy_c_buf_p;
-
-	/* undo effects of setting up yytext */
-	*yy_cp = yy_hold_char;
-
-	if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-		{ /* need to shift things up to make room */
-		/* +2 for EOB chars. */
-		register int number_to_move = yy_n_chars + 2;
-		register char *dest = &yy_current_buffer->yy_ch_buf[
-					yy_current_buffer->yy_buf_size + 2];
-		register char *source =
-				&yy_current_buffer->yy_ch_buf[number_to_move];
-
-		while ( source > yy_current_buffer->yy_ch_buf )
-			*--dest = *--source;
-
-		yy_cp += (int) (dest - source);
-		yy_bp += (int) (dest - source);
-		yy_current_buffer->yy_n_chars =
-			yy_n_chars = yy_current_buffer->yy_buf_size;
-
-		if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-			YY_FATAL_ERROR( "flex scanner push-back overflow" );
-		}
-
-	*--yy_cp = (char) c;
-
-	if ( c == '\n' )
-		--yylineno;
-
-	yytext_ptr = yy_bp;
-	yy_hold_char = *yy_cp;
-	yy_c_buf_p = yy_cp;
-	}
-#endif	/* ifndef YY_NO_UNPUT */
-
-
-#ifdef __cplusplus
-static int yyinput()
-#else
-static int input()
-#endif
-	{
-	int c;
-
-	*yy_c_buf_p = yy_hold_char;
-
-	if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
-		{
-		/* yy_c_buf_p now points to the character we want to return.
-		 * If this occurs *before* the EOB characters, then it's a
-		 * valid NUL; if not, then we've hit the end of the buffer.
-		 */
-		if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			/* This was really a NUL. */
-			*yy_c_buf_p = '\0';
-
-		else
-			{ /* need more input */
-			int offset = yy_c_buf_p - yytext_ptr;
-			++yy_c_buf_p;
-
-			switch ( yy_get_next_buffer() )
-				{
-				case EOB_ACT_LAST_MATCH:
-					/* This happens because yy_g_n_b()
-					 * sees that we've accumulated a
-					 * token and flags that we need to
-					 * try matching the token before
-					 * proceeding.  But for input(),
-					 * there's no matching to consider.
-					 * So convert the EOB_ACT_LAST_MATCH
-					 * to EOB_ACT_END_OF_FILE.
-					 */
-
-					/* Reset buffer status. */
-					yyrestart( yyin );
-
-					/* fall through */
-
-				case EOB_ACT_END_OF_FILE:
-					{
-					if ( yywrap() )
-						return EOF;
-
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-#ifdef __cplusplus
-					return yyinput();
-#else
-					return input();
-#endif
-					}
-
-				case EOB_ACT_CONTINUE_SCAN:
-					yy_c_buf_p = yytext_ptr + offset;
-					break;
-				}
-			}
-		}
-
-	c = *(unsigned char *) yy_c_buf_p;	/* cast for 8-bit char's */
-	*yy_c_buf_p = '\0';	/* preserve yytext */
-	yy_hold_char = *++yy_c_buf_p;
-
-	if ( c == '\n' )
-		++yylineno;
-
-	return c;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yyrestart( FILE *input_file )
-#else
-void yyrestart( input_file )
-FILE *input_file;
-#endif
-	{
-	if ( ! yy_current_buffer )
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
-
-	yy_init_buffer( yy_current_buffer, input_file );
-	yy_load_buffer_state();
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-#else
-void yy_switch_to_buffer( new_buffer )
-YY_BUFFER_STATE new_buffer;
-#endif
-	{
-	if ( yy_current_buffer == new_buffer )
-		return;
-
-	if ( yy_current_buffer )
-		{
-		/* Flush out information for old buffer. */
-		*yy_c_buf_p = yy_hold_char;
-		yy_current_buffer->yy_buf_pos = yy_c_buf_p;
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	yy_current_buffer = new_buffer;
-	yy_load_buffer_state();
-
-	/* We don't actually know whether we did this switch during
-	 * EOF (yywrap()) processing, but the only time this flag
-	 * is looked at is after yywrap() is called, so it's safe
-	 * to go ahead and always set it.
-	 */
-	yy_did_buffer_switch_on_eof = 1;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_load_buffer_state( void )
-#else
-void yy_load_buffer_state()
-#endif
-	{
-	yy_n_chars = yy_current_buffer->yy_n_chars;
-	yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
-	yyin = yy_current_buffer->yy_input_file;
-	yy_hold_char = *yy_c_buf_p;
-	}
-
-
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-#else
-YY_BUFFER_STATE yy_create_buffer( file, size )
-FILE *file;
-int size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_buf_size = size;
-
-	/* yy_ch_buf has to be 2 characters longer than the size given because
-	 * we need to put in 2 end-of-buffer characters.
-	 */
-	b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
-	if ( ! b->yy_ch_buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_is_our_buffer = 1;
-
-	yy_init_buffer( b, file );
-
-	return b;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_delete_buffer( YY_BUFFER_STATE b )
-#else
-void yy_delete_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-	{
-	if ( ! b )
-		return;
-
-	if ( b == yy_current_buffer )
-		yy_current_buffer = (YY_BUFFER_STATE) 0;
-
-	if ( b->yy_is_our_buffer )
-		yy_flex_free( (void *) b->yy_ch_buf );
-
-	yy_flex_free( (void *) b );
-	}
-
-
-
-#ifdef YY_USE_PROTOS
-void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
-#else
-void yy_init_buffer( b, file )
-YY_BUFFER_STATE b;
-FILE *file;
-#endif
-
-
-	{
-	yy_flush_buffer( b );
-
-	b->yy_input_file = file;
-	b->yy_fill_buffer = 1;
-
-#if YY_ALWAYS_INTERACTIVE
-	b->yy_is_interactive = 1;
-#else
-#if YY_NEVER_INTERACTIVE
-	b->yy_is_interactive = 0;
-#else
-	b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-#endif
-#endif
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_flush_buffer( YY_BUFFER_STATE b )
-#else
-void yy_flush_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-
-	{
-	if ( ! b )
-		return;
-
-	b->yy_n_chars = 0;
-
-	/* We always need two end-of-buffer characters.  The first causes
-	 * a transition to the end-of-buffer state.  The second causes
-	 * a jam in that state.
-	 */
-	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
-	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
-	b->yy_buf_pos = &b->yy_ch_buf[0];
-
-	b->yy_at_bol = 1;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	if ( b == yy_current_buffer )
-		yy_load_buffer_state();
-	}
-
-
-#ifndef YY_NO_SCAN_BUFFER
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
-#else
-YY_BUFFER_STATE yy_scan_buffer( base, size )
-char *base;
-yy_size_t size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	if ( size < 2 ||
-	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
-	     base[size-1] != YY_END_OF_BUFFER_CHAR )
-		/* They forgot to leave room for the EOB's. */
-		return 0;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
-	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
-	b->yy_buf_pos = b->yy_ch_buf = base;
-	b->yy_is_our_buffer = 0;
-	b->yy_input_file = 0;
-	b->yy_n_chars = b->yy_buf_size;
-	b->yy_is_interactive = 0;
-	b->yy_at_bol = 1;
-	b->yy_fill_buffer = 0;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	yy_switch_to_buffer( b );
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_STRING
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
-#else
-YY_BUFFER_STATE yy_scan_string( yy_str )
-yyconst char *yy_str;
-#endif
-	{
-	int len;
-	for ( len = 0; yy_str[len]; ++len )
-		;
-
-	return yy_scan_bytes( yy_str, len );
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_BYTES
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
-#else
-YY_BUFFER_STATE yy_scan_bytes( bytes, len )
-yyconst char *bytes;
-int len;
-#endif
-	{
-	YY_BUFFER_STATE b;
-	char *buf;
-	yy_size_t n;
-	int i;
-
-	/* Get memory for full buffer, including space for trailing EOB's. */
-	n = len + 2;
-	buf = (char *) yy_flex_alloc( n );
-	if ( ! buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
-	for ( i = 0; i < len; ++i )
-		buf[i] = bytes[i];
-
-	buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
-
-	b = yy_scan_buffer( buf, n );
-	if ( ! b )
-		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
-	/* It's okay to grow etc. this buffer, and we should throw it
-	 * away when we're done.
-	 */
-	b->yy_is_our_buffer = 1;
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_PUSH_STATE
-#ifdef YY_USE_PROTOS
-static void yy_push_state( int new_state )
-#else
-static void yy_push_state( new_state )
-int new_state;
-#endif
-	{
-	if ( yy_start_stack_ptr >= yy_start_stack_depth )
-		{
-		yy_size_t new_size;
-
-		yy_start_stack_depth += YY_START_STACK_INCR;
-		new_size = yy_start_stack_depth * sizeof( int );
-
-		if ( ! yy_start_stack )
-			yy_start_stack = (int *) yy_flex_alloc( new_size );
-
-		else
-			yy_start_stack = (int *) yy_flex_realloc(
-					(void *) yy_start_stack, new_size );
-
-		if ( ! yy_start_stack )
-			YY_FATAL_ERROR(
-			"out of memory expanding start-condition stack" );
-		}
-
-	yy_start_stack[yy_start_stack_ptr++] = YY_START;
-
-	BEGIN(new_state);
-	}
-#endif
-
-
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state()
-	{
-	if ( --yy_start_stack_ptr < 0 )
-		YY_FATAL_ERROR( "start-condition stack underflow" );
-
-	BEGIN(yy_start_stack[yy_start_stack_ptr]);
-	}
-#endif
-
-
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state()
-	{
-	return yy_start_stack[yy_start_stack_ptr - 1];
-	}
-#endif
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-#ifdef YY_USE_PROTOS
-static void yy_fatal_error( yyconst char msg[] )
-#else
-static void yy_fatal_error( msg )
-char msg[];
-#endif
-	{
-	(void) fprintf( stderr, "%s\n", msg );
-	exit( YY_EXIT_FAILURE );
-	}
-
-
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		yytext[yyleng] = yy_hold_char; \
-		yy_c_buf_p = yytext + n; \
-		yy_hold_char = *yy_c_buf_p; \
-		*yy_c_buf_p = '\0'; \
-		yyleng = n; \
-		} \
-	while ( 0 )
-
-
-/* Internal utility routines. */
-
-#ifndef yytext_ptr
-#ifdef YY_USE_PROTOS
-static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
-#else
-static void yy_flex_strncpy( s1, s2, n )
-char *s1;
-yyconst char *s2;
-int n;
-#endif
-	{
-	register int i;
-	for ( i = 0; i < n; ++i )
-		s1[i] = s2[i];
-	}
-#endif
-
-#ifdef YY_NEED_STRLEN
-#ifdef YY_USE_PROTOS
-static int yy_flex_strlen( yyconst char *s )
-#else
-static int yy_flex_strlen( s )
-yyconst char *s;
-#endif
-	{
-	register int n;
-	for ( n = 0; s[n]; ++n )
-		;
-
-	return n;
-	}
-#endif
-
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_alloc( yy_size_t size )
-#else
-static void *yy_flex_alloc( size )
-yy_size_t size;
-#endif
-	{
-	return (void *) malloc( size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_realloc( void *ptr, yy_size_t size )
-#else
-static void *yy_flex_realloc( ptr, size )
-void *ptr;
-yy_size_t size;
-#endif
-	{
-	/* The cast to (char *) in the following accommodates both
-	 * implementations that use char* generic pointers, and those
-	 * that use void* generic pointers.  It works with the latter
-	 * because both ANSI C and C++ allow castless assignment from
-	 * any pointer type to void*, and deal with argument conversions
-	 * as though doing an assignment.
-	 */
-	return (void *) realloc( (char *) ptr, size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void yy_flex_free( void *ptr )
-#else
-static void yy_flex_free( ptr )
-void *ptr;
-#endif
-	{
-	free( ptr );
-	}
-
-#if YY_MAIN
-int main()
-	{
-	yylex();
-	return 0;
-	}
-#endif
-#line 101 "nslexer.l"
-
-
-#undef _nsyywrap
-int
-_nsyywrap()
-{
-	return 1;
-} /* _nsyywrap */
-
-void
-_nsyyerror(msg)
-	const char *msg;
-{
-
-	printf("Error in nslexer\n");
-} /* _nsyyerror */
diff --git a/newlib/libc/sys/linux/net/nslexer.l b/newlib/libc/sys/linux/net/nslexer.l
deleted file mode 100644
index 0b66b6c66..000000000
--- a/newlib/libc/sys/linux/net/nslexer.l
+++ /dev/null
@@ -1,114 +0,0 @@
-%{
-/*	$NetBSD: nslexer.l,v 1.3 1999/01/25 00:16:17 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <sys/cdefs.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = 
-  "$FreeBSD: src/lib/libc/net/nslexer.l,v 1.3 2001/11/11 02:48:09 bde Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <ctype.h>
-#define _NS_PRIVATE
-#include <nsswitch.h>
-#include <string.h>
-
-#include "nsparser.h"
-
-#define YY_NO_UNPUT
-
-%}
-
-%option yylineno
-
-BLANK		[ \t]
-CR		\n
-STRING		[a-zA-Z][a-zA-Z0-9_]*
-
-%%
-
-{BLANK}+	;			/* skip whitespace */
-
-#.*		;			/* skip comments */
-
-\\{CR}		;			/* allow continuation */
-
-{CR}		return NL;
-
-[sS][uU][cC][cC][eE][sS][sS]		return SUCCESS;
-[uU][nN][aA][vV][aA][iI][lL]		return UNAVAIL;
-[nN][oO][tT][fF][oO][uU][nN][dD]	return NOTFOUND;
-[tT][rR][yY][aA][gG][aA][iI][nN]	return TRYAGAIN;
-
-[rR][eE][tT][uU][rR][nN]		return RETURN;
-[cC][oO][nN][tT][iI][nN][uU][eE]	return CONTINUE;
-
-{STRING}	{
-			char *p;
-			int i;
-
-			if ((p = strdup(yytext)) == NULL)
-				    printf("nsdispatch: memory allocation failure\n");
-
-			for (i = 0; i < strlen(p); i++) {
-				if (isupper((unsigned char)p[i]))
-					p[i] = tolower((unsigned char)p[i]);
-			}
-			_nsyylval.str = p;
-			return STRING;
-		}
-
-.		return yytext[0];
-
-%%
-
-#undef _nsyywrap
-int
-_nsyywrap()
-{
-	return 1;
-} /* _nsyywrap */
-
-void
-_nsyyerror(msg)
-	const char *msg;
-{
-
-	printf("Error in nslexer\n");
-} /* _nsyyerror */
diff --git a/newlib/libc/sys/linux/net/nsparser.c b/newlib/libc/sys/linux/net/nsparser.c
deleted file mode 100644
index b4701aed1..000000000
--- a/newlib/libc/sys/linux/net/nsparser.c
+++ /dev/null
@@ -1,541 +0,0 @@
-#ifndef lint
-static char yysccsid[] = "@(#)yaccpar	1.9 (Berkeley) 02/21/93";
-#endif
-#define YYBYACC 1
-#define YYMAJOR 1
-#define YYMINOR 9
-#define yyclearin (yychar=(-1))
-#define yyerrok (yyerrflag=0)
-#define YYRECOVERING (yyerrflag!=0)
-#define yyparse _nsyyparse
-#define yylex _nsyylex
-#define yyerror _nsyyerror
-#define yychar _nsyychar
-#define yyval _nsyyval
-#define yylval _nsyylval
-#define yydebug _nsyydebug
-#define yynerrs _nsyynerrs
-#define yyerrflag _nsyyerrflag
-#define yyss _nsyyss
-#define yyssp _nsyyssp
-#define yyvs _nsyyvs
-#define yyvsp _nsyyvsp
-#define yylhs _nsyylhs
-#define yylen _nsyylen
-#define yydefred _nsyydefred
-#define yydgoto _nsyydgoto
-#define yysindex _nsyysindex
-#define yyrindex _nsyyrindex
-#define yygindex _nsyygindex
-#define yytable _nsyytable
-#define yycheck _nsyycheck
-#define yyname _nsyyname
-#define yyrule _nsyyrule
-#define YYPREFIX "_nsyy"
-#line 2 "nsparser.y"
-/*	$NetBSD: nsparser.y,v 1.3 1999/01/25 00:16:18 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid =
-  "$FreeBSD: src/lib/libc/net/nsparser.y,v 1.3 2002/03/21 22:47:17 obrien Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#define _NS_PRIVATE
-#include <nsswitch.h>
-#include <stdio.h>
-#include <string.h>
-
-
-static	void	_nsaddsrctomap(const char *);
-
-static	ns_dbt		curdbt;
-static	ns_src		cursrc;
-#line 59 "nsparser.y"
-typedef union {
-	char *str;
-	int   mapval;
-} YYSTYPE;
-#line 97 "y.tab.c"
-#define NL 257
-#define SUCCESS 258
-#define UNAVAIL 259
-#define NOTFOUND 260
-#define TRYAGAIN 261
-#define RETURN 262
-#define CONTINUE 263
-#define STRING 264
-#define YYERRCODE 256
-short _nsyylhs[] = {                                        -1,
-    0,    0,    3,    3,    4,    4,    4,    4,    5,    6,
-    6,    7,    9,    7,    8,    8,   10,    1,    1,    1,
-    1,    2,    2,
-};
-short _nsyylen[] = {                                         2,
-    0,    1,    1,    2,    1,    3,    4,    2,    1,    1,
-    2,    1,    0,    5,    1,    2,    3,    1,    1,    1,
-    1,    1,    1,
-};
-short _nsyydefred[] = {                                      0,
-    0,    5,    9,    0,    0,    3,    0,    8,    4,    0,
-    6,    0,    0,   10,   13,    7,   11,    0,   18,   19,
-   20,   21,    0,    0,   15,    0,   14,   16,   22,   23,
-   17,
-};
-short _nsyydgoto[] = {                                       4,
-   23,   31,    5,    6,    7,   13,   14,   24,   18,   25,
-};
-short _nsyysindex[] = {                                   -255,
- -249,    0,    0,    0, -255,    0,  -41,    0,    0, -254,
-    0,  -73, -253,    0,    0,    0,    0, -245,    0,    0,
-    0,    0,  -42,  -93,    0, -256,    0,    0,    0,    0,
-    0,
-};
-short _nsyyrindex[] = {                                     20,
-    0,    0,    0,    0,   21,    0,    0,    0,    0,    0,
-    0, -252,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,
-};
-short _nsyygindex[] = {                                      0,
-    0,    0,    0,   17,    0,    0,   10,    0,    0,    1,
-};
-#define YYTABLESIZE 168
-short _nsyytable[] = {                                      27,
-    1,    2,   11,   16,   12,   29,   30,    8,    3,   12,
-   12,   12,   19,   20,   21,   22,   10,   15,   26,    1,
-    2,    9,   17,    0,   28,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,   19,   20,   21,   22,
-};
-short _nsyycheck[] = {                                      93,
-  256,  257,  257,  257,  257,  262,  263,  257,  264,  264,
-  264,  264,  258,  259,  260,  261,   58,   91,   61,    0,
-    0,    5,   13,   -1,   24,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,  258,  259,  260,  261,
-};
-#define YYFINAL 4
-#ifndef YYDEBUG
-#define YYDEBUG 0
-#endif
-#define YYMAXTOKEN 264
-#if YYDEBUG
-char *_nsyyname[] = {
-"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"':'",0,0,"'='",0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"'['",0,"']'",0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"NL","SUCCESS",
-"UNAVAIL","NOTFOUND","TRYAGAIN","RETURN","CONTINUE","STRING",
-};
-char *_nsyyrule[] = {
-"$accept : File",
-"File :",
-"File : Lines",
-"Lines : Entry",
-"Lines : Lines Entry",
-"Entry : NL",
-"Entry : Database ':' NL",
-"Entry : Database ':' Srclist NL",
-"Entry : error NL",
-"Database : STRING",
-"Srclist : Item",
-"Srclist : Srclist Item",
-"Item : STRING",
-"$$1 :",
-"Item : STRING '[' $$1 Criteria ']'",
-"Criteria : Criterion",
-"Criteria : Criteria Criterion",
-"Criterion : Status '=' Action",
-"Status : SUCCESS",
-"Status : UNAVAIL",
-"Status : NOTFOUND",
-"Status : TRYAGAIN",
-"Action : RETURN",
-"Action : CONTINUE",
-};
-#endif
-#ifdef YYSTACKSIZE
-#undef YYMAXDEPTH
-#define YYMAXDEPTH YYSTACKSIZE
-#else
-#ifdef YYMAXDEPTH
-#define YYSTACKSIZE YYMAXDEPTH
-#else
-#define YYSTACKSIZE 500
-#define YYMAXDEPTH 500
-#endif
-#endif
-int yydebug;
-int yynerrs;
-int yyerrflag;
-int yychar;
-short *yyssp;
-YYSTYPE *yyvsp;
-YYSTYPE yyval;
-YYSTYPE yylval;
-short yyss[YYSTACKSIZE];
-YYSTYPE yyvs[YYSTACKSIZE];
-#define yystacksize YYSTACKSIZE
-#line 150 "nsparser.y"
-
-static void
-_nsaddsrctomap(elem)
-	const char *elem;
-{
-	int		i, lineno;
-	extern int	_nsyylineno;
-	extern char *	_nsyytext;
-
-	lineno = _nsyylineno - (*_nsyytext == '\n' ? 1 : 0);
-	if (curdbt.srclistsize > 0) {
-		if ((strcasecmp(elem, NSSRC_COMPAT) == 0) ||
-		    (strcasecmp(curdbt.srclist[0].name, NSSRC_COMPAT) == 0)) {
-				/* XXX: syslog the following */
-			printf("line %d 'compat' used with other sources",
-			    lineno);
-			return;
-		}
-	}
-	for (i = 0; i < curdbt.srclistsize; i++) {
-		if (strcasecmp(curdbt.srclist[i].name, elem) == 0) {
-				/* XXX: syslog the following */
-			printf("%s line %d: duplicate source '%s'",
-			    lineno, elem);
-			return;
-		}
-	}
-	cursrc.name = elem;
-	_nsdbtaddsrc(&curdbt, &cursrc);
-}
-#line 276 "y.tab.c"
-#define YYABORT goto yyabort
-#define YYREJECT goto yyabort
-#define YYACCEPT goto yyaccept
-#define YYERROR goto yyerrlab
-int
-yyparse()
-{
-    register int yym, yyn, yystate;
-#if YYDEBUG
-    register char *yys;
-    extern char *getenv();
-
-    if (yys = getenv("YYDEBUG"))
-    {
-        yyn = *yys;
-        if (yyn >= '0' && yyn <= '9')
-            yydebug = yyn - '0';
-    }
-#endif
-
-    yynerrs = 0;
-    yyerrflag = 0;
-    yychar = (-1);
-
-    yyssp = yyss;
-    yyvsp = yyvs;
-    *yyssp = yystate = 0;
-
-yyloop:
-    if (yyn = yydefred[yystate]) goto yyreduce;
-    if (yychar < 0)
-    {
-        if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, reading %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-    }
-    if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: state %d, shifting to state %d\n",
-                    YYPREFIX, yystate, yytable[yyn]);
-#endif
-        if (yyssp >= yyss + yystacksize - 1)
-        {
-            goto yyoverflow;
-        }
-        *++yyssp = yystate = yytable[yyn];
-        *++yyvsp = yylval;
-        yychar = (-1);
-        if (yyerrflag > 0)  --yyerrflag;
-        goto yyloop;
-    }
-    if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-        yyn = yytable[yyn];
-        goto yyreduce;
-    }
-    if (yyerrflag) goto yyinrecovery;
-#ifdef lint
-    goto yynewerror;
-#endif
-yynewerror:
-    yyerror("syntax error");
-#ifdef lint
-    goto yyerrlab;
-#endif
-yyerrlab:
-    ++yynerrs;
-yyinrecovery:
-    if (yyerrflag < 3)
-    {
-        yyerrflag = 3;
-        for (;;)
-        {
-            if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
-                    yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: state %d, error recovery shifting\
- to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
-#endif
-                if (yyssp >= yyss + yystacksize - 1)
-                {
-                    goto yyoverflow;
-                }
-                *++yyssp = yystate = yytable[yyn];
-                *++yyvsp = yylval;
-                goto yyloop;
-            }
-            else
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: error recovery discarding state %d\n",
-                            YYPREFIX, *yyssp);
-#endif
-                if (yyssp <= yyss) goto yyabort;
-                --yyssp;
-                --yyvsp;
-            }
-        }
-    }
-    else
-    {
-        if (yychar == 0) goto yyabort;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-        yychar = (-1);
-        goto yyloop;
-    }
-yyreduce:
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: state %d, reducing by rule %d (%s)\n",
-                YYPREFIX, yystate, yyn, yyrule[yyn]);
-#endif
-    yym = yylen[yyn];
-    yyval = yyvsp[1-yym];
-    switch (yyn)
-    {
-case 7:
-#line 87 "nsparser.y"
-{
-			_nsdbtput(&curdbt);
-		}
-break;
-case 8:
-#line 91 "nsparser.y"
-{
-			yyerrok;
-		}
-break;
-case 9:
-#line 98 "nsparser.y"
-{
-			curdbt.name = yylval.str;
-			curdbt.srclist = NULL;
-			curdbt.srclistsize = 0;
-		}
-break;
-case 12:
-#line 112 "nsparser.y"
-{
-			cursrc.flags = NS_SUCCESS;
-			_nsaddsrctomap(yyvsp[0].str);
-		}
-break;
-case 13:
-#line 116 "nsparser.y"
-{ cursrc.flags = NS_SUCCESS; }
-break;
-case 14:
-#line 117 "nsparser.y"
-{
-			_nsaddsrctomap(yyvsp[-4].str);
-		}
-break;
-case 17:
-#line 129 "nsparser.y"
-{
-			if (yyvsp[0].mapval)		/* if action == RETURN set RETURN bit */
-				cursrc.flags |= yyvsp[-2].mapval;  
-			else		/* else unset it */
-				cursrc.flags &= ~yyvsp[-2].mapval;
-		}
-break;
-case 18:
-#line 138 "nsparser.y"
-{ yyval.mapval = NS_SUCCESS; }
-break;
-case 19:
-#line 139 "nsparser.y"
-{ yyval.mapval = NS_UNAVAIL; }
-break;
-case 20:
-#line 140 "nsparser.y"
-{ yyval.mapval = NS_NOTFOUND; }
-break;
-case 21:
-#line 141 "nsparser.y"
-{ yyval.mapval = NS_TRYAGAIN; }
-break;
-case 22:
-#line 145 "nsparser.y"
-{ yyval.mapval = 1L; }
-break;
-case 23:
-#line 146 "nsparser.y"
-{ yyval.mapval = 0L; }
-break;
-#line 487 "y.tab.c"
-    }
-    yyssp -= yym;
-    yystate = *yyssp;
-    yyvsp -= yym;
-    yym = yylhs[yyn];
-    if (yystate == 0 && yym == 0)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: after reduction, shifting from state 0 to\
- state %d\n", YYPREFIX, YYFINAL);
-#endif
-        yystate = YYFINAL;
-        *++yyssp = YYFINAL;
-        *++yyvsp = yyval;
-        if (yychar < 0)
-        {
-            if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-            if (yydebug)
-            {
-                yys = 0;
-                if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-                if (!yys) yys = "illegal-symbol";
-                printf("%sdebug: state %d, reading %d (%s)\n",
-                        YYPREFIX, YYFINAL, yychar, yys);
-            }
-#endif
-        }
-        if (yychar == 0) goto yyaccept;
-        goto yyloop;
-    }
-    if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
-        yystate = yytable[yyn];
-    else
-        yystate = yydgoto[yym];
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: after reduction, shifting from state %d \
-to state %d\n", YYPREFIX, *yyssp, yystate);
-#endif
-    if (yyssp >= yyss + yystacksize - 1)
-    {
-        goto yyoverflow;
-    }
-    *++yyssp = yystate;
-    *++yyvsp = yyval;
-    goto yyloop;
-yyoverflow:
-    yyerror("yacc stack overflow");
-yyabort:
-    return (1);
-yyaccept:
-    return (0);
-}
diff --git a/newlib/libc/sys/linux/net/nsparser.h b/newlib/libc/sys/linux/net/nsparser.h
deleted file mode 100644
index 6a6fae0be..000000000
--- a/newlib/libc/sys/linux/net/nsparser.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#define NL 257
-#define SUCCESS 258
-#define UNAVAIL 259
-#define NOTFOUND 260
-#define TRYAGAIN 261
-#define RETURN 262
-#define CONTINUE 263
-#define STRING 264
-typedef union {
-	char *str;
-	int   mapval;
-} YYSTYPE;
-extern YYSTYPE _nsyylval;
diff --git a/newlib/libc/sys/linux/net/nsparser.y b/newlib/libc/sys/linux/net/nsparser.y
deleted file mode 100644
index 42f63a8a5..000000000
--- a/newlib/libc/sys/linux/net/nsparser.y
+++ /dev/null
@@ -1,178 +0,0 @@
-%{
-/*	$NetBSD: nsparser.y,v 1.3 1999/01/25 00:16:18 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Luke Mewburn.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *        This product includes software developed by the NetBSD
- *        Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid =
-  "$FreeBSD: src/lib/libc/net/nsparser.y,v 1.3 2002/03/21 22:47:17 obrien Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#define _NS_PRIVATE
-#include <nsswitch.h>
-#include <stdio.h>
-#include <string.h>
-
-
-static	void	_nsaddsrctomap(const char *);
-
-static	ns_dbt		curdbt;
-static	ns_src		cursrc;
-%}
-
-%union {
-	char *str;
-	int   mapval;
-}
-
-%token	NL
-%token	SUCCESS UNAVAIL NOTFOUND TRYAGAIN
-%token	RETURN CONTINUE
-%token	<str> STRING
-
-%type	<mapval> Status Action
-
-%%
-
-File
-	:	/* empty */
-	| Lines
-	;
-
-Lines
-	: Entry
-	| Lines Entry
-	;
-
-Entry
-	: NL
-	| Database ':' NL
-	| Database ':' Srclist NL
-		{
-			_nsdbtput(&curdbt);
-		}
-	| error NL
-		{
-			yyerrok;
-		}
-	;
-
-Database
-	: STRING
-		{
-			curdbt.name = yylval.str;
-			curdbt.srclist = NULL;
-			curdbt.srclistsize = 0;
-		}
-	;
-
-Srclist
-	: Item
-	| Srclist Item
-	;
-
-Item
-	: STRING
-		{
-			cursrc.flags = NS_SUCCESS;
-			_nsaddsrctomap($1);
-		}
-	| STRING '[' { cursrc.flags = NS_SUCCESS; } Criteria ']'
-		{
-			_nsaddsrctomap($1);
-		}
-	;
-
-Criteria
-	: Criterion
-	| Criteria Criterion
-	;
-
-Criterion
-	: Status '=' Action
-		{
-			if ($3)		/* if action == RETURN set RETURN bit */
-				cursrc.flags |= $1;  
-			else		/* else unset it */
-				cursrc.flags &= ~$1;
-		}
-	;
-
-Status
-	: SUCCESS	{ $$ = NS_SUCCESS; }
-	| UNAVAIL	{ $$ = NS_UNAVAIL; }
-	| NOTFOUND	{ $$ = NS_NOTFOUND; }
-	| TRYAGAIN	{ $$ = NS_TRYAGAIN; }
-	;
-
-Action
-	: RETURN	{ $$ = 1L; }
-	| CONTINUE	{ $$ = 0L; }
-	;
-
-%%
-
-static void
-_nsaddsrctomap(elem)
-	const char *elem;
-{
-	int		i, lineno;
-	extern int	_nsyylineno;
-	extern char *	_nsyytext;
-
-	lineno = _nsyylineno - (*_nsyytext == '\n' ? 1 : 0);
-	if (curdbt.srclistsize > 0) {
-		if ((strcasecmp(elem, NSSRC_COMPAT) == 0) ||
-		    (strcasecmp(curdbt.srclist[0].name, NSSRC_COMPAT) == 0)) {
-				/* XXX: syslog the following */
-			printf("line %d 'compat' used with other sources",
-			    lineno);
-			return;
-		}
-	}
-	for (i = 0; i < curdbt.srclistsize; i++) {
-		if (strcasecmp(curdbt.srclist[i].name, elem) == 0) {
-				/* XXX: syslog the following */
-			printf("%s line %d: duplicate source '%s'",
-			    lineno, elem);
-			return;
-		}
-	}
-	cursrc.name = elem;
-	_nsdbtaddsrc(&curdbt, &cursrc);
-}
diff --git a/newlib/libc/sys/linux/net/rcmd.3 b/newlib/libc/sys/linux/net/rcmd.3
deleted file mode 100644
index 9479a237d..000000000
--- a/newlib/libc/sys/linux/net/rcmd.3
+++ /dev/null
@@ -1,298 +0,0 @@
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     From: @(#)rcmd.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/rcmd.3,v 1.20 2001/10/01 16:08:56 ru Exp $
-.\"
-.Dd March 3, 2000
-.Dt RCMD 3
-.Os
-.Sh NAME
-.Nm rcmd ,
-.Nm rresvport ,
-.Nm iruserok ,
-.Nm ruserok ,
-.Nm rcmd_af ,
-.Nm rresvport_af ,
-.Nm iruserok_sa
-.Nd routines for returning a stream to a remote command
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In unistd.h
-.Ft int
-.Fn rcmd "char **ahost" "int inport" "const char *locuser" "const char *remuser" "const char *cmd" "int *fd2p"
-.Ft int
-.Fn rresvport "int *port"
-.Ft int
-.Fn iruserok "u_long raddr" "int superuser" "const char *ruser" "const char *luser"
-.Ft int
-.Fn ruserok "const char *rhost" "int superuser" "const char *ruser" "const char *luser"
-.Ft int
-.Fn rcmd_af "char **ahost" "int inport" "const char *locuser" "const char *remuser" "const char *cmd" "int *fd2p" "int af"
-.Ft int
-.Fn rresvport_af "int *port" "int af"
-.Ft int
-.Fn iruserok_sa "const void *addr" "int addrlen" "int superuser" "const char *ruser" "const char *luser"
-.Sh DESCRIPTION
-The
-.Fn rcmd
-function
-is used by the super-user to execute a command on
-a remote machine using an authentication scheme based
-on reserved port numbers.
-The
-.Fn rresvport
-function
-returns a descriptor to a socket
-with an address in the privileged port space.
-The
-.Fn ruserok
-function
-is used by servers
-to authenticate clients requesting service with
-.Fn rcmd .
-All three functions are present in the same file and are used
-by the
-.Xr rshd 8
-server (among others).
-.Pp
-The
-.Fn rcmd
-function
-looks up the host
-.Fa *ahost
-using
-.Xr gethostbyname 3 ,
-returning -1 if the host does not exist.
-Otherwise
-.Fa *ahost
-is set to the standard name of the host
-and a connection is established to a server
-residing at the well-known Internet port
-.Fa inport .
-.Pp
-If the connection succeeds,
-a socket in the Internet domain of type
-.Dv SOCK_STREAM
-is returned to the caller, and given to the remote
-command as
-.Em stdin
-and
-.Em stdout .
-If
-.Fa fd2p
-is non-zero, then an auxiliary channel to a control
-process will be set up, and a descriptor for it will be placed
-in
-.Fa *fd2p .
-The control process will return diagnostic
-output from the command (unit 2) on this channel, and will also
-accept bytes on this channel as being
-.Tn UNIX
-signal numbers, to be
-forwarded to the process group of the command.
-If
-.Fa fd2p
-is 0, then the
-.Em stderr
-(unit 2 of the remote
-command) will be made the same as the
-.Em stdout
-and no
-provision is made for sending arbitrary signals to the remote process,
-although you may be able to get its attention by using out-of-band data.
-.Pp
-The protocol is described in detail in
-.Xr rshd 8 .
-.Pp
-The
-.Fn rresvport
-function is used to obtain a socket to which an address with a Privileged
-Internet port is bound.
-This socket is suitable for use by
-.Fn rcmd
-and several other functions.
-Privileged Internet ports are those in the range 0 to 1023.
-Only the super-user is allowed to bind an address of this sort
-to a socket.
-.Pp
-The
-.Fn iruserok
-and
-.Fn ruserok
-functions take a remote host's IP address or name, as returned by the
-.Xr gethostbyname 3
-routines, two user names and a flag indicating whether the local user's
-name is that of the super-user.
-Then, if the user is
-.Em NOT
-the super-user, it checks the
-.Pa /etc/hosts.equiv
-file.
-If that lookup is not done, or is unsuccessful, the
-.Pa .rhosts
-in the local user's home directory is checked to see if the request for
-service is allowed.
-.Pp
-If this file does not exist, is not a regular file, is owned by anyone
-other than the user or the super-user, or is writable by anyone other
-than the owner, the check automatically fails.
-Zero is returned if the machine name is listed in the
-.Dq Pa hosts.equiv
-file, or the host and remote user name are found in the
-.Dq Pa .rhosts
-file; otherwise
-.Fn iruserok
-and
-.Fn ruserok
-return -1.
-If the local domain (as obtained from
-.Xr gethostname 3 )
-is the same as the remote domain, only the machine name need be specified.
-.Pp
-The
-.Fn iruserok
-function is strongly preferred for security reasons.
-It requires trusting the local DNS at most, while the
-.Fn ruserok
-function requires trusting the entire DNS, which can be spoofed.
-.Pp
-The functions with an
-.Dq Li _af
-or
-.Dq Li _sa
-suffix, i.e.,
-.Fn rcmd_af ,
-.Fn rresvport_af
-and
-.Fn iruserok_sa ,
-work the same as the corresponding functions without a
-suffix, except that they are capable of handling both IPv6 and IPv4 ports.
-.Pp
-The
-.Dq Li _af
-suffix means that the function has an additional
-.Fa af
-argument which is used to specify the address family,
-(see below).
-The
-.Fa af
-argument extension is implemented for functions
-that have no binary address argument.
-Instead, the
-.Fa af
-argument specifies which address family is desired.
-.Pp
-The
-.Dq Li _sa
-suffix means that the function has general socket address and
-length arguments.
-As the socket address is a protocol independent data structure,
-IPv4 and IPv6 socket address can be passed as desired.
-The
-.Fa sa
-argument extension is implemented for functions
-that pass a protocol dependent binary address argument.
-The argument needs to be replaced with a more general address structure
-to support multiple address families in a general way.
-.Pp
-The functions with neither an
-.Dq Li _af
-suffix nor an
-.Dq Li _sa
-suffix work for IPv4 only, except for
-.Fn ruserok
-which can handle both IPv6 and IPv4.
-To switch the address family, the
-.Fa af
-argument must be filled with
-.Dv AF_INET ,
-or
-.Dv AF_INET6 .
-For
-.Fn rcmd_af ,
-.Dv PF_UNSPEC
-is also allowed.
-.Sh DIAGNOSTICS
-The
-.Fn rcmd
-function
-returns a valid socket descriptor on success.
-It returns -1 on error and prints a diagnostic message
-on the standard error.
-.Pp
-The
-.Fn rresvport
-function
-returns a valid, bound socket descriptor on success.
-It returns -1 on error with the global value
-.Va errno
-set according to the reason for failure.
-The error code
-.Er EAGAIN
-is overloaded to mean ``All network ports in use.''
-.Sh SEE ALSO
-.Xr rlogin 1 ,
-.Xr rsh 1 ,
-.Xr intro 2 ,
-.Xr rexec 3 ,
-.Xr rexecd 8 ,
-.Xr rlogind 8 ,
-.Xr rshd 8
-.Pp
-.Rs
-.%A W. Stevens
-.%A M. Thomas
-.%T "Advanced Socket API for IPv6"
-.%O RFC2292
-.Re
-.Rs
-.%A W. Stevens
-.%A M. Thomas
-.%A E. Nordmark
-.%T "Advanced Socket API for IPv6"
-.%O draft-ietf-ipngwg-rfc2292bis-01.txt
-.Re
-.Sh HISTORY
-Most of these
-functions appeared in
-.Bx 4.2 .
-.Fn rresvport_af
-appeared in RFC2292, and was implemented by the WIDE project
-for the Hydrangea IPv6 protocol stack kit.
-.Fn rcmd_af
-appeared in draft-ietf-ipngwg-rfc2292bis-01.txt,
-and was implemented in the WIDE/KAME IPv6 protocol stack kit.
-.Fn iruserok_sa
-appeared in discussion on the IETF ipngwg mailing list,
-and was implemented in
-.Fx 4.0 .
diff --git a/newlib/libc/sys/linux/net/rcmd.c b/newlib/libc/sys/linux/net/rcmd.c
deleted file mode 100644
index 708b69d1b..000000000
--- a/newlib/libc/sys/linux/net/rcmd.c
+++ /dev/null
@@ -1,779 +0,0 @@
-/*
- * Copyright (c) 1983, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)rcmd.c	8.3 (Berkeley) 3/26/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <time.h>
-#include <sys/select.h>
-
-#include "namespace.h"
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <signal.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <errno.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#ifdef YP
-#include <rpc/rpc.h>
-#include <rpcsvc/yp_prot.h>
-#include <rpcsvc/ypclnt.h>
-#endif
-#include <arpa/nameser.h>
-#include "un-namespace.h"
-
-/* wrapper for KAME-special getnameinfo() */
-#ifndef NI_WITHSCOPEID
-#define NI_WITHSCOPEID	0
-#endif
-
-extern int innetgr( const char *, const char *, const char *, const char * );
-extern int rcmdsh(char **ahost, int rport, const char *locuser, const char *remuser, const char *cmd, const char *rshprog);
-int rresvport_af(int *alport, int family);
-
-#define max(a, b)	((a > b) ? a : b)
-
-int __ivaliduser(FILE *, u_int32_t, const char *, const char *);
-int __ivaliduser_af(FILE *,const void *, const char *, const char *, int, int);
-int __ivaliduser_sa(FILE *, const struct sockaddr *, socklen_t, const char *,
-    const char *);
-static int __icheckhost(const struct sockaddr *, socklen_t, const char *);
-
-char paddr[NI_MAXHOST];
-
-int
-rcmd_af(ahost, rport, locuser, remuser, cmd, fd2p, af)
-	char **ahost;
-	u_short rport;
-	const char *locuser, *remuser, *cmd;
-	int *fd2p;
-	int af;
-{
-	struct addrinfo hints, *res, *ai;
-	struct sockaddr_storage from;
-	fd_set reads;
-	sigset_t oldmask, newmask;
-	pid_t pid;
-	int s, aport, lport, timo, error;
-	char c, *p;
-	int refused, nres;
-	char num[8];
-	static char canonnamebuf[MAXDNAME];	/* is it proper here? */
-
-	/* call rcmdsh() with specified remote shell if appropriate. */
-	if (!issetugid() && (p = getenv("RSH"))) {
-		struct servent *sp = getservbyname("shell", "tcp");
-
-		if (sp && sp->s_port == rport)
-			return (rcmdsh(ahost, rport, locuser, remuser,
-			    cmd, p));
-	}
-
-	/* use rsh(1) if non-root and remote port is shell. */
-	if (geteuid()) {
-		struct servent *sp = getservbyname("shell", "tcp");
-
-		if (sp && sp->s_port == rport)
-			return (rcmdsh(ahost, rport, locuser, remuser,
-			    cmd, NULL));
-	}
-
-	pid = getpid();
-
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_flags = AI_CANONNAME;
-	hints.ai_family = af;
-	hints.ai_socktype = SOCK_STREAM;
-	hints.ai_protocol = 0;
-	(void)snprintf(num, sizeof(num), "%d", ntohs(rport));
-	error = getaddrinfo(*ahost, num, &hints, &res);
-	if (error) {
-		fprintf(stderr, "rcmd: getaddrinfo: %s\n",
-			gai_strerror(error));
-		if (error == EAI_SYSTEM)
-			fprintf(stderr, "rcmd: getaddrinfo: %s\n",
-				strerror(errno));
-		return (-1);
-	}
-
-	if (res->ai_canonname
-	 && strlen(res->ai_canonname) + 1 < sizeof(canonnamebuf)) {
-		strncpy(canonnamebuf, res->ai_canonname, sizeof(canonnamebuf));
-		*ahost = canonnamebuf;
-	}
-	nres = 0;
-	for (ai = res; ai; ai = ai->ai_next)
-		nres++;
-	ai = res;
-	refused = 0;
-	sigemptyset(&newmask);
-	sigaddset(&newmask, SIGURG);
-	sigprocmask(SIG_BLOCK, (const sigset_t *)&newmask, &oldmask);
-	for (timo = 1, lport = IPPORT_RESERVED - 1;;) {
-		s = rresvport_af(&lport, ai->ai_family);
-		if (s < 0) {
-			if (errno != EAGAIN && ai->ai_next) {
-				ai = ai->ai_next;
-				continue;
-			}
-			if (errno == EAGAIN)
-				(void)fprintf(stderr,
-				    "rcmd: socket: All ports in use\n");
-			else
-				(void)fprintf(stderr, "rcmd: socket: %s\n",
-				    strerror(errno));
-			freeaddrinfo(res);
-			sigprocmask(SIG_SETMASK, (const sigset_t *)&oldmask,
-			    NULL);
-			return (-1);
-		}
-		fcntl(s, F_SETOWN, pid);
-		if (connect(s, ai->ai_addr, ai->ai_addrlen) >= 0)
-			break;
-		(void)close(s);
-		if (errno == EADDRINUSE) {
-			lport--;
-			continue;
-		}
-		if (errno == ECONNREFUSED)
-			refused = 1;
-		if (ai->ai_next == NULL && (!refused || timo > 16)) {
-			(void)fprintf(stderr, "%s: %s\n",
-				      *ahost, strerror(errno));
-			freeaddrinfo(res);
-			sigprocmask(SIG_SETMASK, (const sigset_t *)&oldmask,
-			    NULL);
-			return (-1);
-		}
-		if (nres > 1) {
-			int oerrno = errno;
-
-			getnameinfo(ai->ai_addr, ai->ai_addrlen,
-				    paddr, sizeof(paddr),
-				    NULL, 0,
-				    NI_NUMERICHOST|NI_WITHSCOPEID);
-			(void)fprintf(stderr, "connect to address %s: ",
-				      paddr);
-			errno = oerrno;
-			perror(0);
-		}
-		if ((ai = ai->ai_next) == NULL) {
-			/* refused && timo <= 16 */
-			struct timespec time_to_sleep, time_remaining;
-
-			time_to_sleep.tv_sec = timo;
-			time_to_sleep.tv_nsec = 0;
-			(void)nanosleep(&time_to_sleep, &time_remaining);
-			timo *= 2;
-			ai = res;
-			refused = 0;
-		}
-		if (nres > 1) {
-			getnameinfo(ai->ai_addr, ai->ai_addrlen,
-				    paddr, sizeof(paddr),
-				    NULL, 0,
-				    NI_NUMERICHOST|NI_WITHSCOPEID);
-			fprintf(stderr, "Trying %s...\n", paddr);
-		}
-	}
-	lport--;
-	if (fd2p == 0) {
-		write(s, "", 1);
-		lport = 0;
-	} else {
-		char num[8];
-		int s2 = rresvport_af(&lport, ai->ai_family), s3;
-		int len = ai->ai_addrlen;
-		int nfds;
-
-		if (s2 < 0)
-			goto bad;
-		listen(s2, 1);
-		(void)snprintf(num, sizeof(num), "%d", lport);
-		if (write(s, num, strlen(num)+1) != strlen(num)+1) {
-			(void)fprintf(stderr,
-			    "rcmd: write (setting up stderr): %s\n",
-			    strerror(errno));
-			(void)close(s2);
-			goto bad;
-		}
-		nfds = max(s, s2)+1;
-		if(nfds > FD_SETSIZE) {
-			fprintf(stderr, "rcmd: too many files\n");
-			(void)close(s2);
-			goto bad;
-		}
-again:
-		FD_ZERO(&reads);
-		FD_SET(s, &reads);
-		FD_SET(s2, &reads);
-		errno = 0;
-		if (select(nfds, &reads, 0, 0, 0) < 1 || !FD_ISSET(s2, &reads)){
-			if (errno != 0)
-				(void)fprintf(stderr,
-				    "rcmd: select (setting up stderr): %s\n",
-				    strerror(errno));
-			else
-				(void)fprintf(stderr,
-				"select: protocol failure in circuit setup\n");
-			(void)close(s2);
-			goto bad;
-		}
-		s3 = accept(s2, (struct sockaddr *)&from, &len);
-		switch (from.ss_family) {
-		case AF_INET:
-			aport = ntohs(((struct sockaddr_in *)&from)->sin_port);
-			break;
-#ifdef INET6
-		case AF_INET6:
-			aport = ntohs(((struct sockaddr_in6 *)&from)->sin6_port);
-			break;
-#endif
-		default:
-			aport = 0;	/* error */
-			break;
-		}
-		/*
-		 * XXX careful for ftp bounce attacks. If discovered, shut them
-		 * down and check for the real auxiliary channel to connect.
-		 */
-		if (aport == 20) {
-			close(s3);
-			goto again;
-		}
-		(void)close(s2);
-		if (s3 < 0) {
-			(void)fprintf(stderr,
-			    "rcmd: accept: %s\n", strerror(errno));
-			lport = 0;
-			goto bad;
-		}
-		*fd2p = s3;
-		if (aport >= IPPORT_RESERVED || aport < IPPORT_RESERVED / 2) {
-			(void)fprintf(stderr,
-			    "socket: protocol failure in circuit setup.\n");
-			goto bad2;
-		}
-	}
-	(void)write(s, locuser, strlen(locuser)+1);
-	(void)write(s, remuser, strlen(remuser)+1);
-	(void)write(s, cmd, strlen(cmd)+1);
-	if (read(s, &c, 1) != 1) {
-		(void)fprintf(stderr,
-		    "rcmd: %s: %s\n", *ahost, strerror(errno));
-		goto bad2;
-	}
-	if (c != 0) {
-		while (read(s, &c, 1) == 1) {
-			(void)write(STDERR_FILENO, &c, 1);
-			if (c == '\n')
-				break;
-		}
-		goto bad2;
-	}
-	sigprocmask(SIG_SETMASK, (const sigset_t *)&oldmask, NULL);
-	freeaddrinfo(res);
-	return (s);
-bad2:
-	if (lport)
-		(void)close(*fd2p);
-bad:
-	(void)close(s);
-	sigprocmask(SIG_SETMASK, (const sigset_t *)&oldmask, NULL);
-	freeaddrinfo(res);
-	return (-1);
-}
-
-int
-rcmd(ahost, rport, locuser, remuser, cmd, fd2p)
-	char **ahost;
-	u_short rport;
-	const char *locuser, *remuser, *cmd;
-	int *fd2p;
-{
-	return rcmd_af(ahost, rport, locuser, remuser, cmd, fd2p, AF_INET);
-}
-
-int
-rresvport(port)
-	int *port;
-{
-	return rresvport_af(port, AF_INET);
-}
-
-int
-rresvport_af(alport, family)
-	int *alport, family;
-{
-	int s;
-	struct sockaddr_storage ss;
-	u_short *sport;
-
-	memset(&ss, 0, sizeof(ss));
-	ss.ss_family = family;
-	switch (family) {
-	case AF_INET:
-		sport = &((struct sockaddr_in *)&ss)->sin_port;
-		((struct sockaddr_in *)&ss)->sin_addr.s_addr = INADDR_ANY;
-		break;
-#ifdef INET6
-	case AF_INET6:
-		sport = &((struct sockaddr_in6 *)&ss)->sin6_port;
-		((struct sockaddr_in6 *)&ss)->sin6_addr = in6addr_any;
-		break;
-#endif
-	default:
-		errno = EAFNOSUPPORT;
-		return -1;
-	}
-
-	s = socket(ss.ss_family, SOCK_STREAM, 0);
-	if (s < 0)
-		return (-1);
-#if 0 /* compat_exact_traditional_rresvport_semantics */
-	sin.sin_port = htons((u_short)*alport);
-	if (_bind(s, (struct sockaddr *)&sin, sizeof(sin)) >= 0)
-		return (s);
-	if (errno != EADDRINUSE) {
-		(void)close(s);
-		return (-1);
-	}
-#endif
-	*sport = 0;
-	if (bindresvport_sa(s, (struct sockaddr *)&ss) == -1) {
-		(void)close(s);
-		return (-1);
-	}
-	*alport = (int)ntohs(*sport);
-	return (s);
-}
-
-int	__check_rhosts_file = 1;
-char	*__rcmd_errstr;
-
-int
-ruserok(rhost, superuser, ruser, luser)
-	const char *rhost, *ruser, *luser;
-	int superuser;
-{
-	struct addrinfo hints, *res, *r;
-	int error;
-
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_family = PF_UNSPEC;
-	hints.ai_socktype = SOCK_DGRAM;	/*dummy*/
-	error = getaddrinfo(rhost, "0", &hints, &res);
-	if (error)
-		return (-1);
-
-	for (r = res; r; r = r->ai_next) {
-		if (iruserok_sa(r->ai_addr, r->ai_addrlen, superuser, ruser,
-		    luser) == 0) {
-			freeaddrinfo(res);
-			return (0);
-		}
-	}
-	freeaddrinfo(res);
-	return (-1);
-}
-
-/*
- * New .rhosts strategy: We are passed an ip address. We spin through
- * hosts.equiv and .rhosts looking for a match. When the .rhosts only
- * has ip addresses, we don't have to trust a nameserver.  When it
- * contains hostnames, we spin through the list of addresses the nameserver
- * gives us and look for a match.
- *
- * Returns 0 if ok, -1 if not ok.
- */
-int
-iruserok(raddr, superuser, ruser, luser)
-	unsigned long raddr;
-	int superuser;
-	const char *ruser, *luser;
-{
-	struct sockaddr_in sin;
-	int sin_len;
-
-	memset(&sin, 0, sizeof(sin));
-	sin.sin_family = AF_INET;
-	sin_len = sizeof(struct sockaddr_in);
-	memcpy(&sin.sin_addr, &raddr, sizeof(sin.sin_addr));
-	return iruserok_sa((struct sockaddr *)&sin, sin_len, superuser,
-		ruser, luser);
-}
-
-/*
- * AF independent extension of iruserok.
- *
- * Returns 0 if ok, -1 if not ok.
- */
-int
-iruserok_sa(ra, rlen, superuser, ruser, luser)
-	const void *ra;
-	int rlen;
-	int superuser;
-	const char *ruser, *luser;
-{
-	char *cp;
-	struct stat sbuf;
-	struct passwd *pwd;
-	FILE *hostf;
-	uid_t uid;
-	int first;
-	char pbuf[MAXPATHLEN];
-	const struct sockaddr *raddr;
-	struct sockaddr_storage ss;
-
-	/* avoid alignment issue */
-	if (rlen > sizeof(ss)) 
-		return(-1);
-	memcpy(&ss, ra, rlen);
-	raddr = (struct sockaddr *)&ss;
-
-	first = 1;
-	hostf = superuser ? NULL : fopen(_PATH_HEQUIV, "r");
-again:
-	if (hostf) {
-		if (__ivaliduser_sa(hostf, raddr, rlen, luser, ruser) == 0) {
-			(void)fclose(hostf);
-			return (0);
-		}
-		(void)fclose(hostf);
-	}
-	if (first == 1 && (__check_rhosts_file || superuser)) {
-		first = 0;
-		if ((pwd = getpwnam(luser)) == NULL)
-			return (-1);
-		(void)strcpy(pbuf, pwd->pw_dir);
-		(void)strcat(pbuf, "/.rhosts");
-
-		/*
-		 * Change effective uid while opening .rhosts.  If root and
-		 * reading an NFS mounted file system, can't read files that
-		 * are protected read/write owner only.
-		 */
-		uid = geteuid();
-		(void)seteuid(pwd->pw_uid);
-		hostf = fopen(pbuf, "r");
-		(void)seteuid(uid);
-
-		if (hostf == NULL)
-			return (-1);
-		/*
-		 * If not a regular file, or is owned by someone other than
-		 * user or root or if writeable by anyone but the owner, quit.
-		 */
-		cp = NULL;
-		if (lstat(pbuf, &sbuf) < 0)
-			cp = ".rhosts lstat failed";
-		else if (!S_ISREG(sbuf.st_mode))
-			cp = ".rhosts not regular file";
-		else if (fstat(fileno(hostf), &sbuf) < 0)
-			cp = ".rhosts fstat failed";
-		else if (sbuf.st_uid && sbuf.st_uid != pwd->pw_uid)
-			cp = "bad .rhosts owner";
-		else if (sbuf.st_mode & (S_IWGRP|S_IWOTH))
-			cp = ".rhosts writeable by other than owner";
-		/* If there were any problems, quit. */
-		if (cp) {
-			__rcmd_errstr = cp;
-			(void)fclose(hostf);
-			return (-1);
-		}
-		goto again;
-	}
-	return (-1);
-}
-
-/*
- * XXX
- * Don't make static, used by lpd(8).
- *
- * Returns 0 if ok, -1 if not ok.
- */
-int
-__ivaliduser(hostf, raddr, luser, ruser)
-	FILE *hostf;
-	u_int32_t raddr;
-	const char *luser, *ruser;
-{
-	struct sockaddr_in sin;
-	int sin_len;
-
-	memset(&sin, 0, sizeof(sin));
-	sin.sin_family = AF_INET;
-	sin_len = sizeof(struct sockaddr_in);
-	memcpy(&sin.sin_addr, &raddr, sizeof(sin.sin_addr));
-	return __ivaliduser_sa(hostf, (struct sockaddr *)&sin, sin_len,
-		luser, ruser);
-}
-
-/*
- * Returns 0 if ok, -1 if not ok.
- *
- * XXX obsolete API.
- */
-int
-__ivaliduser_af(hostf, raddr, luser, ruser, af, len)
-	FILE *hostf;
-	const void *raddr;
-	const char *luser, *ruser;
-	int af, len;
-{
-	struct sockaddr *sa = NULL;
-	struct sockaddr_in *sin = NULL;
-#ifdef INET6
-	struct sockaddr_in6 *sin6 = NULL;
-#endif
-	struct sockaddr_storage ss;
-
-	memset(&ss, 0, sizeof(ss));
-	switch (af) {
-	case AF_INET:
-		if (len != sizeof(sin->sin_addr))
-			return -1;
-		sin = (struct sockaddr_in *)&ss;
-		sin->sin_family = AF_INET;
-		memcpy(&sin->sin_addr, raddr, sizeof(sin->sin_addr));
-		break;
-#ifdef INET6
-	case AF_INET6:
-		if (len != sizeof(sin6->sin6_addr))
-			return -1;
-		/* you will lose scope info */
-		sin6 = (struct sockaddr_in6 *)&ss;
-		sin6->sin6_family = AF_INET6;
-		memcpy(&sin6->sin6_addr, raddr, sizeof(sin6->sin6_addr));
-		break;
-#endif
-	default:
-		return -1;
-	}
-
-	sa = (struct sockaddr *)&ss;
-	return __ivaliduser_sa(hostf, sa, 0, luser, ruser);
-}
-
-int
-__ivaliduser_sa(hostf, raddr, salen, luser, ruser)
-	FILE *hostf;
-	const struct sockaddr *raddr;
-	socklen_t salen;
-	const char *luser, *ruser;
-{
-	char *user, *p;
-	int ch;
-	char buf[MAXHOSTNAMELEN + 128];		/* host + login */
-	char hname[MAXHOSTNAMELEN];
-	/* Presumed guilty until proven innocent. */
-	int userok = 0, hostok = 0;
-#ifdef YP
-	char *ypdomain;
-
-	if (yp_get_default_domain(&ypdomain))
-		ypdomain = NULL;
-#else
-#define	ypdomain NULL
-#endif
-	/* We need to get the damn hostname back for netgroup matching. */
-	if (getnameinfo(raddr, salen, hname, sizeof(hname), NULL, 0,
-			NI_NAMEREQD) != 0)
-		return (-1);
-
-	while (fgets(buf, sizeof(buf), hostf)) {
-		p = buf;
-		/* Skip lines that are too long. */
-		if (strchr(p, '\n') == NULL) {
-			while ((ch = getc(hostf)) != '\n' && ch != EOF);
-			continue;
-		}
-		if (*p == '\n' || *p == '#') {
-			/* comment... */
-			continue;
-		}
-		while (*p != '\n' && *p != ' ' && *p != '\t' && *p != '\0') {
-			*p = isupper((unsigned char)*p) ? tolower((unsigned char)*p) : *p;
-			p++;
-		}
-		if (*p == ' ' || *p == '\t') {
-			*p++ = '\0';
-			while (*p == ' ' || *p == '\t')
-				p++;
-			user = p;
-			while (*p != '\n' && *p != ' ' &&
-			    *p != '\t' && *p != '\0')
-				p++;
-		} else
-			user = p;
-		*p = '\0';
-		/*
-		 * Do +/- and +@/-@ checking. This looks really nasty,
-		 * but it matches SunOS's behavior so far as I can tell.
-		 */
-		switch(buf[0]) {
-		case '+':
-			if (!buf[1]) {     /* '+' matches all hosts */
-				hostok = 1;
-				break;
-			}
-			if (buf[1] == '@')  /* match a host by netgroup */
-				hostok = innetgr((char *)&buf[2],
-					(char *)&hname, NULL, ypdomain);
-			else		/* match a host by addr */
-				hostok = __icheckhost(raddr, salen,
-						      (char *)&buf[1]);
-			break;
-		case '-':     /* reject '-' hosts and all their users */
-			if (buf[1] == '@') {
-				if (innetgr((char *)&buf[2],
-					      (char *)&hname, NULL, ypdomain))
-					return(-1);
-			} else {
-				if (__icheckhost(raddr, salen,
-						 (char *)&buf[1]))
-					return(-1);
-			}
-			break;
-		default:  /* if no '+' or '-', do a simple match */
-			hostok = __icheckhost(raddr, salen, buf);
-			break;
-		}
-		switch(*user) {
-		case '+':
-			if (!*(user+1)) {      /* '+' matches all users */
-				userok = 1;
-				break;
-			}
-			if (*(user+1) == '@')  /* match a user by netgroup */
-				userok = innetgr(user+2, NULL, ruser, ypdomain);
-			else	   /* match a user by direct specification */
-				userok = !(strcmp(ruser, user+1));
-			break;
-		case '-': 		/* if we matched a hostname, */
-			if (hostok) {   /* check for user field rejections */
-				if (!*(user+1))
-					return(-1);
-				if (*(user+1) == '@') {
-					if (innetgr(user+2, NULL,
-							ruser, ypdomain))
-						return(-1);
-				} else {
-					if (!strcmp(ruser, user+1))
-						return(-1);
-				}
-			}
-			break;
-		default:	/* no rejections: try to match the user */
-			if (hostok)
-				userok = !(strcmp(ruser,*user ? user : luser));
-			break;
-		}
-		if (hostok && userok)
-			return(0);
-	}
-	return (-1);
-}
-
-/*
- * Returns "true" if match, 0 if no match.
- *
- * NI_WITHSCOPEID is useful for comparing sin6_scope_id portion
- * if af == AF_INET6.
- */
-static int
-__icheckhost(raddr, salen, lhost)
-	const struct sockaddr *raddr;
-	socklen_t salen;
-        const char *lhost;
-{
-	struct sockaddr_in sin;
-	struct sockaddr_in6 *sin6;
-	struct addrinfo hints, *res, *r;
-	int error;
-	char h1[NI_MAXHOST], h2[NI_MAXHOST];
-
-	if (raddr->sa_family == AF_INET6) {
-		sin6 = (struct sockaddr_in6 *)raddr;
-		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
-			memset(&sin, 0, sizeof(sin));
-			sin.sin_family = AF_INET;
-			memcpy(&sin.sin_addr, &sin6->sin6_addr.s6_addr[12],
-			       sizeof(sin.sin_addr));
-			raddr = (struct sockaddr *)&sin;
-			salen = sizeof(struct sockaddr_in);
-		}
-	}
-
-	h1[0] = '\0';
-	if (getnameinfo(raddr, salen, h1, sizeof(h1), NULL, 0,
-			NI_NUMERICHOST | NI_WITHSCOPEID) != 0)
-		return (0);
-
-	/* Resolve laddr into sockaddr */
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_family = raddr->sa_family;
-	hints.ai_socktype = SOCK_DGRAM;	/*XXX dummy*/
-	res = NULL;
-	error = getaddrinfo(lhost, "0", &hints, &res);
-	if (error)
-		return (0);
-
-	for (r = res; r ; r = r->ai_next) {
-		h2[0] = '\0';
-		if (getnameinfo(r->ai_addr, r->ai_addrlen, h2, sizeof(h2),
-				NULL, 0, NI_NUMERICHOST | NI_WITHSCOPEID) != 0)
-			continue;
-		if (strcmp(h1, h2) == 0) {
-			freeaddrinfo(res);
-			return (1);
-		}
-	}
-
-	/* No match. */
-	freeaddrinfo(res);
-	return (0);
-}
diff --git a/newlib/libc/sys/linux/net/rcmdsh.3 b/newlib/libc/sys/linux/net/rcmdsh.3
deleted file mode 100644
index 43e6a8daa..000000000
--- a/newlib/libc/sys/linux/net/rcmdsh.3
+++ /dev/null
@@ -1,116 +0,0 @@
-.\"	$OpenBSD: rcmdsh.3,v 1.6 1999/07/05 04:41:00 aaron Exp $
-.\"
-.\" Copyright (c) 1983, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/lib/libc/net/rcmdsh.3,v 1.2 2001/11/09 15:19:25 ru Exp $
-.\"
-.Dd September 1, 1996
-.Dt RCMDSH 3
-.Os
-.Sh NAME
-.Nm rcmdsh
-.Nd return a stream to a remote command without superuser
-.Sh SYNOPSIS
-.In unistd.h
-.Ft int
-.Fo rcmdsh
-.Fa "char **ahost"
-.Fa "int inport"
-.Fa "const char *locuser"
-.Fa "const char *remuser"
-.Fa "const char *cmd"
-.Fa "const char *rshprog"
-.Fc
-.Sh DESCRIPTION
-The
-.Fn rcmdsh
-function
-is used by normal users to execute a command on
-a remote machine using an authentication scheme based
-on reserved port numbers using
-.Xr rshd 8
-or the value of
-.Fa rshprog
-(if
-.No non- Ns Dv NULL ) .
-.Pp
-The
-.Fn rcmdsh
-function
-looks up the host
-.Fa *ahost
-using
-.Xr gethostbyname 3 ,
-returning \-1 if the host does not exist.
-Otherwise
-.Fa *ahost
-is set to the standard name of the host
-and a connection is established to a server
-residing at the well-known Internet port
-.Dq Li shell/tcp
-(or whatever port is used by
-.Fa rshprog ) .
-The parameter
-.Fa inport
-is ignored; it is only included to provide an interface similar to
-.Xr rcmd 3 .
-.Pp
-If the connection succeeds,
-a socket in the
-.Ux
-domain of type
-.Dv SOCK_STREAM
-is returned to the caller, and given to the remote
-command as stdin, stdout, and stderr.
-.Sh RETURN VALUES
-The
-.Fn rcmdsh
-function
-returns a valid socket descriptor on success.
-Otherwise, \-1 is returned
-and a diagnostic message is printed on the standard error.
-.Sh SEE ALSO
-.Xr rsh 1 ,
-.Xr socketpair 2 ,
-.Xr rcmd 3 ,
-.Xr rshd 8
-.Sh BUGS
-If
-.Xr rsh 1
-encounters an error, a file descriptor is still returned instead of \-1.
-.Sh HISTORY
-The
-.Fn rcmdsh
-function first appeared in
-.Ox 2.0 ,
-and made its way into
-.Fx 5.0 .
diff --git a/newlib/libc/sys/linux/net/rcmdsh.c b/newlib/libc/sys/linux/net/rcmdsh.c
deleted file mode 100644
index 741814c11..000000000
--- a/newlib/libc/sys/linux/net/rcmdsh.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*	$OpenBSD: rcmdsh.c,v 1.5 1998/04/25 16:23:58 millert Exp $	*/
-
-/*
- * Copyright (c) 2001, MagniComp
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright 
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright 
- *    notice, this list of conditions and the following disclaimer in 
- *    the documentation and/or other materials provided with the distribution. 
- * 3. Neither the name of the MagniComp nor the names of its contributors may
- *    be used to endorse or promote products derived from this software
- *    without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * This is an rcmd() replacement originally by
- * Chris Siebenmann <cks@utcc.utoronto.ca>.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/wait.h>
-
-#include <errno.h>
-#include <netdb.h>
-#include <paths.h>
-#include <pwd.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#ifndef _PATH_RSH
-#define	_PATH_RSH	"/usr/bin/rsh"
-#endif
-
-/*
- * This is a replacement rcmd() function that uses the rsh(1)
- * program in place of a direct rcmd(3) function call so as to
- * avoid having to be root.  Note that rport is ignored.
- */
-int
-rcmdsh(ahost, rport, locuser, remuser, cmd, rshprog)
-	char **ahost;
-	int rport;
-	const char *locuser, *remuser, *cmd, *rshprog;
-{
-	struct addrinfo hints, *res;
-	int cpid, sp[2], error;
-	char *p;
-	struct passwd *pw;
-	char num[8];
-	static char hbuf[NI_MAXHOST];
-
-	/* What rsh/shell to use. */
-	if (rshprog == NULL)
-		rshprog = _PATH_RSH;
-
-	/* locuser must exist on this host. */
-	if ((pw = getpwnam(locuser)) == NULL) {
-		(void)fprintf(stderr, "rcmdsh: unknown user: %s\n", locuser);
-		return (-1);
-	}
-
-	/* Validate remote hostname. */
-	if (strcmp(*ahost, "localhost") != 0) {
-		memset(&hints, 0, sizeof(hints));
-		hints.ai_flags = AI_CANONNAME;
-		hints.ai_family = PF_UNSPEC;
-		hints.ai_socktype = SOCK_STREAM;
-		(void)snprintf(num, sizeof(num), "%d", ntohs(rport));
-		error = getaddrinfo(*ahost, num, &hints, &res);
-		if (error) {
-			fprintf(stderr, "rcmdsh: getaddrinfo: %s\n",
-				gai_strerror(error));
-			return (-1);
-		}
-		if (res->ai_canonname) {
-			strncpy(hbuf, res->ai_canonname, sizeof(hbuf) - 1);
-			hbuf[sizeof(hbuf) - 1] = '\0';
-			*ahost = hbuf;
-		}
-		freeaddrinfo(res);
-	}
-
-	/* Get a socketpair we'll use for stdin and stdout. */
-	if (socketpair(AF_UNIX, SOCK_STREAM, PF_UNSPEC, sp) == -1) {
-		perror("rcmdsh: socketpair");
-		return (-1);
-	}
-
-	cpid = fork();
-	if (cpid == -1) {
-		perror("rcmdsh: fork failed");
-		return (-1);
-	} else if (cpid == 0) {
-		/*
-		 * Child.  We use sp[1] to be stdin/stdout, and close sp[0].
-		 */
-		(void)close(sp[0]);
-		if (dup2(sp[1], 0) == -1 || dup2(0, 1) == -1) {
-			perror("rcmdsh: dup2 failed");
-			_exit(255);
-		}
-		/* Fork again to lose parent. */
-		cpid = fork();
-		if (cpid == -1) {
-			perror("rcmdsh: fork to lose parent failed");
-			_exit(255);
-		}
-		if (cpid > 0)
-			_exit(0);
-
-		/* In grandchild here.  Become local user for rshprog. */
-		if (setuid(pw->pw_uid) == -1) {
-			(void)fprintf(stderr, "rcmdsh: setuid(%u): %s\n",
-			    pw->pw_uid, strerror(errno));
-			_exit(255);
-		}
-
-		/*
-		 * If remote host is "localhost" and local and remote users
-		 * are the same, avoid running remote shell for efficiency.
-		 */
-		if (strcmp(*ahost, "localhost") == 0 &&
-		    strcmp(locuser, remuser) == 0) {
-			if (pw->pw_shell[0] == '\0')
-				rshprog = _PATH_BSHELL;
-			else
-				rshprog = pw->pw_shell;
-			p = strrchr(rshprog, '/');
-			execlp(rshprog, p ? p + 1 : rshprog, "-c", cmd,
-			    (char *)NULL);
-		} else {
-			p = strrchr(rshprog, '/');
-			execlp(rshprog, p ? p + 1 : rshprog, *ahost, "-l",
-			    remuser, cmd, (char *)NULL);
-		}
-		(void)fprintf(stderr, "rcmdsh: execlp %s failed: %s\n",
-		    rshprog, strerror(errno));
-		_exit(255);
-	} else {
-		/* Parent. close sp[1], return sp[0]. */
-		(void)close(sp[1]);
-		/* Reap child. */
-		(void)wait(NULL);
-		return (sp[0]);
-	}
-	/* NOTREACHED */
-}
diff --git a/newlib/libc/sys/linux/net/recv.c b/newlib/libc/sys/linux/net/recv.c
deleted file mode 100644
index 43e537bbb..000000000
--- a/newlib/libc/sys/linux/net/recv.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)recv.c	8.2 (Berkeley) 2/21/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <stddef.h>
-#include "un-namespace.h"
-
-ssize_t
-recv(s, buf, len, flags)
-	int s, flags;
-	size_t len;
-	void *buf;
-{
-	return (recvfrom(s, buf, len, flags, NULL, 0));
-}
diff --git a/newlib/libc/sys/linux/net/res_comp.c b/newlib/libc/sys/linux/net/res_comp.c
deleted file mode 100644
index 12ea02c6d..000000000
--- a/newlib/libc/sys/linux/net/res_comp.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright (c) 1985, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_comp.c	8.1 (Berkeley) 6/4/93";
-static char orig_rcsid[] = "From: Id: res_comp.c,v 8.11 1997/05/21 19:31:04 halley Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <ctype.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#define BIND_4_COMPAT
-
-/*
- * Expand compressed domain name 'comp_dn' to full domain name.
- * 'msg' is a pointer to the begining of the message,
- * 'eomorig' points to the first location after the message,
- * 'exp_dn' is a pointer to a buffer of size 'length' for the result.
- * Return size of compressed name or -1 if there was an error.
- */
-int
-dn_expand(const u_char *msg, const u_char *eom, const u_char *src,
-	  char *dst, int dstsiz)
-{
-	int n = ns_name_uncompress(msg, eom, src, dst, (size_t)dstsiz);
-
-	if (n > 0 && dst[0] == '.')
-		dst[0] = '\0';
-	return (n);
-}
-
-/*
- * Pack domain name 'exp_dn' in presentation form into 'comp_dn'.
- * Return the size of the compressed name or -1.
- * 'length' is the size of the array pointed to by 'comp_dn'.
- */
-int
-dn_comp(const char *src, u_char *dst, int dstsiz,
-	u_char **dnptrs, u_char **lastdnptr)
-{
-	return (ns_name_compress(src, dst, (size_t)dstsiz,
-				 (const u_char **)dnptrs,
-				 (const u_char **)lastdnptr));
-}
-
-/*
- * Skip over a compressed domain name. Return the size or -1.
- */
-int
-dn_skipname(const u_char *ptr, const u_char *eom) {
-	const u_char *saveptr = ptr;
-
-	if (ns_name_skip(&ptr, eom) == -1)
-		return (-1);
-	return (ptr - saveptr);
-}
-
-/*
- * Verify that a domain name uses an acceptable character set.
- */
-
-/*
- * Note the conspicuous absence of ctype macros in these definitions.  On
- * non-ASCII hosts, we can't depend on string literals or ctype macros to
- * tell us anything about network-format data.  The rest of the BIND system
- * is not careful about this, but for some reason, we're doing it right here.
- */
-#define PERIOD 0x2e
-#define	hyphenchar(c) ((c) == 0x2d)
-#define bslashchar(c) ((c) == 0x5c)
-#define periodchar(c) ((c) == PERIOD)
-#define asterchar(c) ((c) == 0x2a)
-#define alphachar(c) (((c) >= 0x41 && (c) <= 0x5a) \
-		   || ((c) >= 0x61 && (c) <= 0x7a))
-#define digitchar(c) ((c) >= 0x30 && (c) <= 0x39)
-
-#define borderchar(c) (alphachar(c) || digitchar(c))
-#define middlechar(c) (borderchar(c) || hyphenchar(c))
-#define	domainchar(c) ((c) > 0x20 && (c) < 0x7f)
-
-int
-res_hnok(dn)
-	const char *dn;
-{
-	int ppch = '\0', pch = PERIOD, ch = *dn++;
-
-	while (ch != '\0') {
-		int nch = *dn++;
-
-		if (periodchar(ch)) {
-			(void)NULL;
-		} else if (periodchar(pch)) {
-			if (!borderchar(ch))
-				return (0);
-		} else if (periodchar(nch) || nch == '\0') {
-			if (!borderchar(ch))
-				return (0);
-		} else {
-			if (!middlechar(ch))
-				return (0);
-		}
-		ppch = pch, pch = ch, ch = nch;
-	}
-	return (1);
-}
-
-/*
- * hostname-like (A, MX, WKS) owners can have "*" as their first label
- * but must otherwise be as a host name.
- */
-int
-res_ownok(dn)
-	const char *dn;
-{
-	if (asterchar(dn[0])) {
-		if (periodchar(dn[1]))
-			return (res_hnok(dn+2));
-		if (dn[1] == '\0')
-			return (1);
-	}
-	return (res_hnok(dn));
-}
-
-/*
- * SOA RNAMEs and RP RNAMEs can have any printable character in their first
- * label, but the rest of the name has to look like a host name.
- */
-int
-res_mailok(dn)
-	const char *dn;
-{
-	int ch, escaped = 0;
-
-	/* "." is a valid missing representation */
-	if (*dn == '\0')
-		return (1);
-
-	/* otherwise <label>.<hostname> */
-	while ((ch = *dn++) != '\0') {
-		if (!domainchar(ch))
-			return (0);
-		if (!escaped && periodchar(ch))
-			break;
-		if (escaped)
-			escaped = 0;
-		else if (bslashchar(ch))
-			escaped = 1;
-	}
-	if (periodchar(ch))
-		return (res_hnok(dn));
-	return (0);
-}
-
-/*
- * This function is quite liberal, since RFC 1034's character sets are only
- * recommendations.
- */
-int
-res_dnok(dn)
-	const char *dn;
-{
-	int ch;
-
-	while ((ch = *dn++) != '\0')
-		if (!domainchar(ch))
-			return (0);
-	return (1);
-}
-
-#ifdef BIND_4_COMPAT
-/*
- * This module must export the following externally-visible symbols:
- *    ___putlong
- *    ___putshort
- *    __getlong
- *    __getshort
- * Note that one _ comes from C and the others come from us.
- */
-void __putlong(u_int32_t src, u_char *dst) { ns_put32(src, dst); }
-void __putshort(u_int16_t src, u_char *dst) { ns_put16(src, dst); }
-u_int32_t _getlong(const u_char *src) { return (ns_get32(src)); }
-u_int16_t _getshort(const u_char *src) { return (ns_get16(src)); }
-#endif /*BIND_4_COMPAT*/
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef dn_comp
-__weak_reference(__dn_comp, dn_comp);
-#undef dn_expand
-__weak_reference(__dn_expand, dn_expand);
diff --git a/newlib/libc/sys/linux/net/res_config.h b/newlib/libc/sys/linux/net/res_config.h
deleted file mode 100644
index b7deb38f9..000000000
--- a/newlib/libc/sys/linux/net/res_config.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* $FreeBSD: src/lib/libc/net/res_config.h,v 1.8 2002/03/22 23:41:54 obrien Exp $ */
-
-#define	DEBUG	1	/* enable debugging code (needed for dig) */
-#define	RESOLVSORT	/* allow sorting of addresses in gethostbyname */
-#define	RFC1535		/* comply with RFC1535 (STRONGLY reccomended by vixie)*/
-#undef	USELOOPBACK	/* res_init() bind to localhost */
-#undef	SUNSECURITY	/* verify gethostbyaddr() calls - WE DONT NEED IT  */
-#define MULTI_PTRS_ARE_ALIASES 1 /* fold multiple PTR records into aliases */
-#define	CHECK_SRVR_ADDR 1 /* confirm that the server requested sent the reply */
-#define BIND_UPDATE 1	/* update support */
diff --git a/newlib/libc/sys/linux/net/res_data.c b/newlib/libc/sys/linux/net/res_data.c
deleted file mode 100644
index 7db548078..000000000
--- a/newlib/libc/sys/linux/net/res_data.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 1995,1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <ctype.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "res_config.h"
-
-const char *_res_opcodes[] = {
-	"QUERY",
-	"IQUERY",
-	"CQUERYM",
-	"CQUERYU",	/* experimental */
-	"NOTIFY",	/* experimental */
-	"UPDATE",
-	"6",
-	"7",
-	"8",
-	"9",
-	"10",
-	"11",
-	"12",
-	"13",
-	"ZONEINIT",
-	"ZONEREF",
-};
-
-const char *_res_resultcodes[] = {
-	"NOERROR",
-	"FORMERR",
-	"SERVFAIL",
-	"NXDOMAIN",
-	"NOTIMP",
-	"REFUSED",
-	"YXDOMAIN",
-	"YXRRSET",
-	"NXRRSET",
-	"NOTAUTH",
-	"ZONEERR",
-	"11",
-	"12",
-	"13",
-	"14",
-	"NOCHANGE",
-};
-
-#ifdef BIND_UPDATE
-const char *_res_sectioncodes[] = {
-	"ZONE",
-	"PREREQUISITES",
-	"UPDATE",
-	"ADDITIONAL",
-};
-#endif
diff --git a/newlib/libc/sys/linux/net/res_debug.c b/newlib/libc/sys/linux/net/res_debug.c
deleted file mode 100644
index 786f633f4..000000000
--- a/newlib/libc/sys/linux/net/res_debug.c
+++ /dev/null
@@ -1,1003 +0,0 @@
-/*
- * Copyright (c) 1985
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1995 by International Business Machines, Inc.
- *
- * International Business Machines, Inc. (hereinafter called IBM) grants
- * permission under its copyrights to use, copy, modify, and distribute this
- * Software with or without fee, provided that the above copyright notice and
- * all paragraphs of this notice appear in all copies, and that the name of IBM
- * not be used in connection with the marketing of any product incorporating
- * the Software or modifications thereof, without specific, written prior
- * permission.
- *
- * To the extent it has a right to do so, IBM grants an immunity from suit
- * under its patents, if any, for the use, sale or manufacture of products to
- * the extent that such products are used for performing Domain Name System
- * dynamic updates in TCP/IP networks by means of the Software.  No immunity is
- * granted for any product per se or for any other function of any product.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL WARRANTIES,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE.  IN NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL,
- * DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE, EVEN
- * IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_debug.c	8.1 (Berkeley) 6/4/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <math.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-
-#define SPRINTF(x) sprintf x
-
-extern const char *_res_opcodes[];
-extern const char *_res_resultcodes[];
-extern const char *_res_sectioncodes[];
-
-/*
- * Print the current options.
- */
-void
-fp_resstat(struct __res_state *statp, FILE *file) {
-	u_long mask;
-
-	fprintf(file, ";; res options:");
-	if (!statp)
-		statp = &_res;
-	for (mask = 1;  mask != 0;  mask <<= 1)
-		if (statp->options & mask)
-			fprintf(file, " %s", p_option(mask));
-	putc('\n', file);
-}
-
-static void
-do_section(ns_msg *handle, ns_sect section, int pflag, FILE *file) {
-	int n, sflag, rrnum;
-	char buf[2048];	/* XXX need to malloc */
-	ns_opcode opcode;
-	ns_rr rr;
-
-	/*
-	 * Print answer records.
-	 */
-	sflag = (_res.pfcode & pflag);
-	if (_res.pfcode && !sflag)
-		return;
-
-	opcode = ns_msg_getflag(*handle, ns_f_opcode);
-	rrnum = 0;
-	for (;;) {
-		if (ns_parserr(handle, section, rrnum, &rr)) {
-			if (errno != ENODEV)
-				fprintf(file, ";; ns_parserr: %s\n",
-					strerror(errno));
-			else if (rrnum > 0 && sflag != 0 &&
-				 (_res.pfcode & RES_PRF_HEAD1))
-				putc('\n', file);
-			return;
-		}
-		if (rrnum == 0 && sflag != 0 && (_res.pfcode & RES_PRF_HEAD1))
-			fprintf(file, ";; %s SECTION:\n",
-				p_section(section, opcode));
-		if (section == ns_s_qd)
-			fprintf(file, ";;\t%s, type = %s, class = %s\n",
-				ns_rr_name(rr),
-				p_type(ns_rr_type(rr)),
-				p_class(ns_rr_class(rr)));
-		else {
-			n = ns_sprintrr(handle, &rr, NULL, NULL,
-					buf, sizeof buf);
-			if (n < 0) {
-				fprintf(file, ";; ns_sprintrr: %s\n",
-					strerror(errno));
-				return;
-			}
-			fputs(buf, file);
-			fputc('\n', file);
-		}
-		rrnum++;
-	}
-}
-
-void
-p_query(const u_char *msg) {
-	fp_query(msg, stdout);
-}
-
-void
-fp_query(const u_char *msg, FILE *file) {
-	fp_nquery(msg, PACKETSZ, file);
-}
-
-/*
- * Print the contents of a query.
- * This is intended to be primarily a debugging routine.
- */
-void
-fp_nquery(const u_char *msg, int len, FILE *file) {
-	ns_msg handle;
-	int qdcount, ancount, nscount, arcount;
-	u_int opcode, rcode, id;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1)
-		return;
-
-	if (ns_initparse(msg, len, &handle) < 0) {
-		fprintf(file, ";; ns_initparse: %s\n", strerror(errno));
-		return;
-	}
-	opcode = ns_msg_getflag(handle, ns_f_opcode);
-	rcode = ns_msg_getflag(handle, ns_f_rcode);
-	id = ns_msg_id(handle);
-	qdcount = ns_msg_count(handle, ns_s_qd);
-	ancount = ns_msg_count(handle, ns_s_an);
-	nscount = ns_msg_count(handle, ns_s_ns);
-	arcount = ns_msg_count(handle, ns_s_ar);
-
-	/*
-	 * Print header fields.
-	 */
-	if ((!_res.pfcode) || (_res.pfcode & RES_PRF_HEADX) || rcode)
-		fprintf(file,
-			";; ->>HEADER<<- opcode: %s, status: %s, id: %d\n",
-			_res_opcodes[opcode], _res_resultcodes[rcode], id);
-	if ((!_res.pfcode) || (_res.pfcode & RES_PRF_HEADX))
-		putc(';', file);
-	if ((!_res.pfcode) || (_res.pfcode & RES_PRF_HEAD2)) {
-		fprintf(file, "; flags:");
-		if (ns_msg_getflag(handle, ns_f_qr))
-			fprintf(file, " qr");
-		if (ns_msg_getflag(handle, ns_f_aa))
-			fprintf(file, " aa");
-		if (ns_msg_getflag(handle, ns_f_tc))
-			fprintf(file, " tc");
-		if (ns_msg_getflag(handle, ns_f_rd))
-			fprintf(file, " rd");
-		if (ns_msg_getflag(handle, ns_f_ra))
-			fprintf(file, " ra");
-		if (ns_msg_getflag(handle, ns_f_z))
-			fprintf(file, " ??");
-		if (ns_msg_getflag(handle, ns_f_ad))
-			fprintf(file, " ad");
-		if (ns_msg_getflag(handle, ns_f_cd))
-			fprintf(file, " cd");
-	}
-	if ((!_res.pfcode) || (_res.pfcode & RES_PRF_HEAD1)) {
-		fprintf(file, "; %s: %d",
-			p_section(ns_s_qd, opcode), qdcount);
-		fprintf(file, ", %s: %d",
-			p_section(ns_s_an, opcode), ancount);
-		fprintf(file, ", %s: %d",
-			p_section(ns_s_ns, opcode), nscount);
-		fprintf(file, ", %s: %d",
-			p_section(ns_s_ar, opcode), arcount);
-	}
-	if ((!_res.pfcode) || (_res.pfcode & 
-		(RES_PRF_HEADX | RES_PRF_HEAD2 | RES_PRF_HEAD1))) {
-		putc('\n',file);
-	}
-	/*
-	 * Print the various sections.
-	 */
-	do_section(&handle, ns_s_qd, RES_PRF_QUES, file);
-	do_section(&handle, ns_s_an, RES_PRF_ANS, file);
-	do_section(&handle, ns_s_ns, RES_PRF_AUTH, file);
-	do_section(&handle, ns_s_ar, RES_PRF_ADD, file);
-	if (qdcount == 0 && ancount == 0 &&
-	    nscount == 0 && arcount == 0)
-		putc('\n', file);
-}
-
-const u_char *
-p_cdnname(const u_char *cp, const u_char *msg, int len, FILE *file) {
-	char name[MAXDNAME];
-	int n;
-
-	if ((n = dn_expand(msg, msg + len, cp, name, sizeof name)) < 0)
-		return (NULL);
-	if (name[0] == '\0')
-		putc('.', file);
-	else
-		fputs(name, file);
-	return (cp + n);
-}
-
-const u_char *
-p_cdname(const u_char *cp, const u_char *msg, FILE *file) {
-	return (p_cdnname(cp, msg, PACKETSZ, file));
-}
-
-/* Return a fully-qualified domain name from a compressed name (with
-   length supplied).  */
-
-const u_char *
-p_fqnname(cp, msg, msglen, name, namelen)
-	const u_char *cp, *msg;
-	int msglen;
-	char *name;
-	int namelen;
-{
-	int n, newlen;
-
-	if ((n = dn_expand(msg, cp + msglen, cp, name, namelen)) < 0)
-		return (NULL);
-	newlen = strlen(name);
-	if (newlen == 0 || name[newlen - 1] != '.') {
-		if (newlen + 1 >= namelen)	/* Lack space for final dot */
-			return (NULL);
-		else
-			strcpy(name + newlen, ".");
-	}
-	return (cp + n);
-}
-
-/* XXX:	the rest of these functions need to become length-limited, too. */
-
-const u_char *
-p_fqname(const u_char *cp, const u_char *msg, FILE *file) {
-	char name[MAXDNAME];
-	const u_char *n;
-
-	n = p_fqnname(cp, msg, MAXCDNAME, name, sizeof name);
-	if (n == NULL)
-		return (NULL);
-	fputs(name, file);
-	return (n);
-}
-
-/*
- * Names of RR classes and qclasses.  Classes and qclasses are the same, except
- * that C_ANY is a qclass but not a class.  (You can ask for records of class
- * C_ANY, but you can't have any records of that class in the database.)
- */
-const struct res_sym __p_class_syms[] = {
-	{C_IN,		"IN"},
-	{C_CHAOS,	"CHAOS"},
-	{C_HS,		"HS"},
-	{C_HS,		"HESIOD"},
-	{C_ANY,		"ANY"},
-	{C_NONE,	"NONE"},
-	{C_IN, 		(char *)0}
-};
-
-/*
- * Names of message sections.
- */
-const struct res_sym __p_default_section_syms[] = {
-	{ns_s_qd,	"QUERY"},
-	{ns_s_an,	"ANSWER"},
-	{ns_s_ns,	"AUTHORITY"},
-	{ns_s_ar,	"ADDITIONAL"},
-	{0,             (char *)0}
-};
-
-const struct res_sym __p_update_section_syms[] = {
-	{S_ZONE,	"ZONE"},
-	{S_PREREQ,	"PREREQUISITE"},
-	{S_UPDATE,	"UPDATE"},
-	{S_ADDT,	"ADDITIONAL"},
-	{0,             (char *)0}
-};
-
-/*
- * Names of RR types and qtypes.  Types and qtypes are the same, except
- * that T_ANY is a qtype but not a type.  (You can ask for records of type
- * T_ANY, but you can't have any records of that type in the database.)
- */
-const struct res_sym __p_type_syms[] = {
-	{T_A,		"A",		"address"},
-	{T_NS,		"NS",		"name server"},
-	{T_MD,		"MD",		"mail destination (deprecated)"},
-	{T_MF,		"MF",		"mail forwarder (deprecated)"},
-	{T_CNAME,	"CNAME",	"canonical name"},
-	{T_SOA,		"SOA",		"start of authority"},
-	{T_MB,		"MB",		"mailbox"},
-	{T_MG,		"MG",		"mail group member"},
-	{T_MR,		"MR",		"mail rename"},
-	{T_NULL,	"NULL",		"null"},
-	{T_WKS,		"WKS",		"well-known service (deprecated)"},
-	{T_PTR,		"PTR",		"domain name pointer"},
-	{T_HINFO,	"HINFO",	"host information"},
-	{T_MINFO,	"MINFO",	"mailbox information"},
-	{T_MX,		"MX",		"mail exchanger"},
-	{T_TXT,		"TXT",		"text"},
-	{T_RP,		"RP",		"responsible person"},
-	{T_AFSDB,	"AFSDB",	"DCE or AFS server"},
-	{T_X25,		"X25",		"X25 address"},
-	{T_ISDN,	"ISDN",		"ISDN address"},
-	{T_RT,		"RT",		"router"},
-	{T_NSAP,	"NSAP",		"nsap address"},
-	{T_NSAP_PTR,	"NSAP_PTR",	"domain name pointer"},
-	{T_SIG,		"SIG",		"signature"},
-	{T_KEY,		"KEY",		"key"},
-	{T_PX,		"PX",		"mapping information"},
-	{T_GPOS,	"GPOS",		"geographical position (withdrawn)"},
-	{T_AAAA,	"AAAA",		"IPv6 address"},
-	{T_LOC,		"LOC",		"location"},
-	{T_NXT,		"NXT",		"next valid name (unimplemented)"},
-	{T_EID,		"EID",		"endpoint identifier (unimplemented)"},
-	{T_NIMLOC,	"NIMLOC",	"NIMROD locator (unimplemented)"},
-	{T_SRV,		"SRV",		"server selection"},
-	{T_ATMA,	"ATMA",		"ATM address (unimplemented)"},
-	{T_IXFR,	"IXFR",		"incremental zone transfer"},
-	{T_AXFR,	"AXFR",		"zone transfer"},
-	{T_MAILB,	"MAILB",	"mailbox-related data (deprecated)"},
-	{T_MAILA,	"MAILA",	"mail agent (deprecated)"},
-	{T_NAPTR,	"NAPTR",	"URN Naming Authority"},
-	{T_ANY,		"ANY",		"\"any\""},
-	{0, 		NULL,		NULL}
-};
-
-int
-sym_ston(const struct res_sym *syms, const char *name, int *success) {
-	for ((void)NULL; syms->name != 0; syms++) {
-		if (strcasecmp (name, syms->name) == 0) {
-			if (success)
-				*success = 1;
-			return (syms->number);
-		}
-	}
-	if (success)
-		*success = 0;
-	return (syms->number);		/* The default value. */
-}
-
-const char *
-sym_ntos(const struct res_sym *syms, int number, int *success) {
-	static char unname[20];
-
-	for ((void)NULL; syms->name != 0; syms++) {
-		if (number == syms->number) {
-			if (success)
-				*success = 1;
-			return (syms->name);
-		}
-	}
-
-	sprintf(unname, "%d", number);
-	if (success)
-		*success = 0;
-	return (unname);
-}
-
-const char *
-sym_ntop(const struct res_sym *syms, int number, int *success) {
-	static char unname[20];
-
-	for ((void)NULL; syms->name != 0; syms++) {
-		if (number == syms->number) {
-			if (success)
-				*success = 1;
-			return (syms->humanname);
-		}
-	}
-	sprintf(unname, "%d", number);
-	if (success)
-		*success = 0;
-	return (unname);
-}
-
-/*
- * Return a string for the type.
- */
-const char *
-p_type(int type) {
-	return (sym_ntos(__p_type_syms, type, (int *)0));
-}
-
-/*
- * Return a string for the type.
- */
-const char *
-p_section(int section, int opcode) {
-	const struct res_sym *symbols;
-
-	switch (opcode) {
-	case ns_o_update:
-		symbols = __p_update_section_syms;
-		break;
-	default:
-		symbols = __p_default_section_syms;
-		break;
-	}
-	return (sym_ntos(symbols, section, (int *)0));
-}
-
-/*
- * Return a mnemonic for class.
- */
-const char *
-p_class(int class) {
-	return (sym_ntos(__p_class_syms, class, (int *)0));
-}
-
-/*
- * Return a mnemonic for an option
- */
-const char *
-p_option(u_long option) {
-	static char nbuf[40];
-
-	switch (option) {
-	case RES_INIT:		return "init";
-	case RES_DEBUG:		return "debug";
-	case RES_AAONLY:	return "aaonly(unimpl)";
-	case RES_USEVC:		return "usevc";
-	case RES_PRIMARY:	return "primry(unimpl)";
-	case RES_IGNTC:		return "igntc";
-	case RES_RECURSE:	return "recurs";
-	case RES_DEFNAMES:	return "defnam";
-	case RES_STAYOPEN:	return "styopn";
-	case RES_DNSRCH:	return "dnsrch";
-	case RES_INSECURE1:	return "insecure1";
-	case RES_INSECURE2:	return "insecure2";
-	case RES_NOALIASES:	return "noaliases";
-	case RES_USE_INET6:	return "inet6";
-	case RES_NOTLDQUERY:	return "no-tld-query";
-	case RES_USE_EDNS0:	return "edns0";
-	default:		sprintf(nbuf, "?0x%lx?", (u_long)option);
-				return (nbuf);
-	}
-}
-
-/*
- * Return a mnemonic for a time to live.
- */
-const char *
-p_time(u_int32_t value) {
-	static char nbuf[40];
-
-	if (ns_format_ttl(value, nbuf, sizeof nbuf) < 0)
-		sprintf(nbuf, "%u", value);
-	return (nbuf);
-}
-
-
-/*
- * routines to convert between on-the-wire RR format and zone file format.
- * Does not contain conversion to/from decimal degrees; divide or multiply
- * by 60*60*1000 for that.
- */
-
-static unsigned int poweroften[10] = {1, 10, 100, 1000, 10000, 100000,
-				      1000000,10000000,100000000,1000000000};
-
-/* takes an XeY precision/size value, returns a string representation. */
-static const char *
-precsize_ntoa(prec)
-	u_int8_t prec;
-{
-	static char retbuf[sizeof "90000000.00"];
-	unsigned long val;
-	int mantissa, exponent;
-
-	mantissa = (int)((prec >> 4) & 0x0f) % 10;
-	exponent = (int)((prec >> 0) & 0x0f) % 10;
-
-	val = mantissa * poweroften[exponent];
-
-	(void) sprintf(retbuf, "%ld.%.2ld", val/100, val%100);
-	return (retbuf);
-}
-
-/* converts ascii size/precision X * 10**Y(cm) to 0xXY.  moves pointer. */
-static u_int8_t
-precsize_aton(strptr)
-	char **strptr;
-{
-	unsigned int mval = 0, cmval = 0;
-	u_int8_t retval = 0;
-	char *cp;
-	int exponent;
-	int mantissa;
-
-	cp = *strptr;
-
-	while (isdigit((unsigned char)*cp))
-		mval = mval * 10 + (*cp++ - '0');
-
-	if (*cp == '.') {		/* centimeters */
-		cp++;
-		if (isdigit((unsigned char)*cp)) {
-			cmval = (*cp++ - '0') * 10;
-			if (isdigit((unsigned char)*cp)) {
-				cmval += (*cp++ - '0');
-			}
-		}
-	}
-	cmval = (mval * 100) + cmval;
-
-	for (exponent = 0; exponent < 9; exponent++)
-		if (cmval < poweroften[exponent+1])
-			break;
-
-	mantissa = cmval / poweroften[exponent];
-	if (mantissa > 9)
-		mantissa = 9;
-
-	retval = (mantissa << 4) | exponent;
-
-	*strptr = cp;
-
-	return (retval);
-}
-
-/* converts ascii lat/lon to unsigned encoded 32-bit number.  moves pointer. */
-static u_int32_t
-latlon2ul(latlonstrptr,which)
-	char **latlonstrptr;
-	int *which;
-{
-	char *cp;
-	u_int32_t retval;
-	int deg = 0, min = 0, secs = 0, secsfrac = 0;
-
-	cp = *latlonstrptr;
-
-	while (isdigit((unsigned char)*cp))
-		deg = deg * 10 + (*cp++ - '0');
-
-	while (isspace((unsigned char)*cp))
-		cp++;
-
-	if (!(isdigit((unsigned char)*cp)))
-		goto fndhemi;
-
-	while (isdigit((unsigned char)*cp))
-		min = min * 10 + (*cp++ - '0');
-
-	while (isspace((unsigned char)*cp))
-		cp++;
-
-	if (!(isdigit((unsigned char)*cp)))
-		goto fndhemi;
-
-	while (isdigit((unsigned char)*cp))
-		secs = secs * 10 + (*cp++ - '0');
-
-	if (*cp == '.') {		/* decimal seconds */
-		cp++;
-		if (isdigit((unsigned char)*cp)) {
-			secsfrac = (*cp++ - '0') * 100;
-			if (isdigit((unsigned char)*cp)) {
-				secsfrac += (*cp++ - '0') * 10;
-				if (isdigit((unsigned char)*cp)) {
-					secsfrac += (*cp++ - '0');
-				}
-			}
-		}
-	}
-
-	while (!isspace((unsigned char)*cp))   /* if any trailing garbage */
-		cp++;
-
-	while (isspace((unsigned char)*cp))
-		cp++;
-
- fndhemi:
-	switch (*cp) {
-	case 'N': case 'n':
-	case 'E': case 'e':
-		retval = ((unsigned)1<<31)
-			+ (((((deg * 60) + min) * 60) + secs) * 1000)
-			+ secsfrac;
-		break;
-	case 'S': case 's':
-	case 'W': case 'w':
-		retval = ((unsigned)1<<31)
-			- (((((deg * 60) + min) * 60) + secs) * 1000)
-			- secsfrac;
-		break;
-	default:
-		retval = 0;	/* invalid value -- indicates error */
-		break;
-	}
-
-	switch (*cp) {
-	case 'N': case 'n':
-	case 'S': case 's':
-		*which = 1;	/* latitude */
-		break;
-	case 'E': case 'e':
-	case 'W': case 'w':
-		*which = 2;	/* longitude */
-		break;
-	default:
-		*which = 0;	/* error */
-		break;
-	}
-
-	cp++;			/* skip the hemisphere */
-
-	while (!isspace((unsigned char)*cp))   /* if any trailing garbage */
-		cp++;
-
-	while (isspace((unsigned char)*cp))    /* move to next field */
-		cp++;
-
-	*latlonstrptr = cp;
-
-	return (retval);
-}
-
-/* converts a zone file representation in a string to an RDATA on-the-wire
- * representation. */
-int
-loc_aton(ascii, binary)
-	const char *ascii;
-	u_char *binary;
-{
-	const char *cp, *maxcp;
-	u_char *bcp;
-
-	u_int32_t latit = 0, longit = 0, alt = 0;
-	u_int32_t lltemp1 = 0, lltemp2 = 0;
-	int altmeters = 0, altfrac = 0, altsign = 1;
-	u_int8_t hp = 0x16;	/* default = 1e6 cm = 10000.00m = 10km */
-	u_int8_t vp = 0x13;	/* default = 1e3 cm = 10.00m */
-	u_int8_t siz = 0x12;	/* default = 1e2 cm = 1.00m */
-	int which1 = 0, which2 = 0;
-
-	cp = ascii;
-	maxcp = cp + strlen(ascii);
-
-	lltemp1 = latlon2ul(&cp, &which1);
-
-	lltemp2 = latlon2ul(&cp, &which2);
-
-	switch (which1 + which2) {
-	case 3:			/* 1 + 2, the only valid combination */
-		if ((which1 == 1) && (which2 == 2)) { /* normal case */
-			latit = lltemp1;
-			longit = lltemp2;
-		} else if ((which1 == 2) && (which2 == 1)) { /* reversed */
-			longit = lltemp1;
-			latit = lltemp2;
-		} else {	/* some kind of brokenness */
-			return (0);
-		}
-		break;
-	default:		/* we didn't get one of each */
-		return (0);
-	}
-
-	/* altitude */
-	if (*cp == '-') {
-		altsign = -1;
-		cp++;
-	}
-    
-	if (*cp == '+')
-		cp++;
-
-	while (isdigit((unsigned char)*cp))
-		altmeters = altmeters * 10 + (*cp++ - '0');
-
-	if (*cp == '.') {		/* decimal meters */
-		cp++;
-		if (isdigit((unsigned char)*cp)) {
-			altfrac = (*cp++ - '0') * 10;
-			if (isdigit((unsigned char)*cp)) {
-				altfrac += (*cp++ - '0');
-			}
-		}
-	}
-
-	alt = (10000000 + (altsign * (altmeters * 100 + altfrac)));
-
-	while (!isspace((unsigned char)*cp) && (cp < maxcp)) /* if trailing garbage or m */
-		cp++;
-
-	while (isspace((unsigned char)*cp) && (cp < maxcp))
-		cp++;
-
-	if (cp >= maxcp)
-		goto defaults;
-
-	siz = precsize_aton(&cp);
-	
-	while (!isspace((unsigned char)*cp) && (cp < maxcp))   /* if trailing garbage or m */
-		cp++;
-
-	while (isspace((unsigned char)*cp) && (cp < maxcp))
-		cp++;
-
-	if (cp >= maxcp)
-		goto defaults;
-
-	hp = precsize_aton(&cp);
-
-	while (!isspace((unsigned char)*cp) && (cp < maxcp))   /* if trailing garbage or m */
-		cp++;
-
-	while (isspace((unsigned char)*cp) && (cp < maxcp))
-		cp++;
-
-	if (cp >= maxcp)
-		goto defaults;
-
-	vp = precsize_aton(&cp);
-
- defaults:
-
-	bcp = binary;
-	*bcp++ = (u_int8_t) 0;	/* version byte */
-	*bcp++ = siz;
-	*bcp++ = hp;
-	*bcp++ = vp;
-	PUTLONG(latit,bcp);
-	PUTLONG(longit,bcp);
-	PUTLONG(alt,bcp);
-    
-	return (16);		/* size of RR in octets */
-}
-
-/* takes an on-the-wire LOC RR and formats it in a human readable format. */
-const char *
-loc_ntoa(binary, ascii)
-	const u_char *binary;
-	char *ascii;
-{
-	static char *error = "?";
-	const u_char *cp = binary;
-
-	int latdeg, latmin, latsec, latsecfrac;
-	int longdeg, longmin, longsec, longsecfrac;
-	char northsouth, eastwest;
-	int altmeters, altfrac, altsign;
-
-	const u_int32_t referencealt = 100000 * 100;
-
-	int32_t latval, longval, altval;
-	u_int32_t templ;
-	u_int8_t sizeval, hpval, vpval, versionval;
-    
-	char *sizestr, *hpstr, *vpstr;
-
-	size_t len;
-
-	versionval = *cp++;
-
-	if (versionval) {
-		(void) sprintf(ascii, "; error: unknown LOC RR version");
-		return (ascii);
-	}
-
-	sizeval = *cp++;
-
-	hpval = *cp++;
-	vpval = *cp++;
-
-	GETLONG(templ, cp);
-	latval = (templ - ((unsigned)1<<31));
-
-	GETLONG(templ, cp);
-	longval = (templ - ((unsigned)1<<31));
-
-	GETLONG(templ, cp);
-	if (templ < referencealt) { /* below WGS 84 spheroid */
-		altval = referencealt - templ;
-		altsign = -1;
-	} else {
-		altval = templ - referencealt;
-		altsign = 1;
-	}
-
-	if (latval < 0) {
-		northsouth = 'S';
-		latval = -latval;
-	} else
-		northsouth = 'N';
-
-	latsecfrac = latval % 1000;
-	latval = latval / 1000;
-	latsec = latval % 60;
-	latval = latval / 60;
-	latmin = latval % 60;
-	latval = latval / 60;
-	latdeg = latval;
-
-	if (longval < 0) {
-		eastwest = 'W';
-		longval = -longval;
-	} else
-		eastwest = 'E';
-
-	longsecfrac = longval % 1000;
-	longval = longval / 1000;
-	longsec = longval % 60;
-	longval = longval / 60;
-	longmin = longval % 60;
-	longval = longval / 60;
-	longdeg = longval;
-
-	altfrac = altval % 100;
-	altmeters = (altval / 100) * altsign;
-
-	len = strlen (precsize_ntoa(sizeval)) + 1;
-	if ((sizestr = malloc(len)) == NULL)
-		sizestr = error;
-	else
-		memcpy (sizestr, precsize_ntoa(sizeval), len);
-	len = strlen (precsize_ntoa(hpval)) + 1;
-	if ((hpstr = malloc (len)) == NULL)
-		hpstr = error;
-	else
-		memcpy (hpstr, precsize_ntoa(hpval), len);
-	len = strlen (precsize_ntoa(vpval)) + 1;
-	if ((vpstr = malloc (len)) == NULL)
-		vpstr = error;
-	else
-		memcpy (vpstr, precsize_ntoa(vpval), len);
-
-	sprintf(ascii,
-	      "%d %.2d %.2d.%.3d %c %d %.2d %.2d.%.3d %c %d.%.2dm %sm %sm %sm",
-		latdeg, latmin, latsec, latsecfrac, northsouth,
-		longdeg, longmin, longsec, longsecfrac, eastwest,
-		altmeters, altfrac, sizestr, hpstr, vpstr);
-
-	if (sizestr != error)
-		free(sizestr);
-	if (hpstr != error)
-		free(hpstr);
-	if (vpstr != error)
-		free(vpstr);
-
-	return (ascii);
-}
-
-
-/* Return the number of DNS hierarchy levels in the name. */
-int
-dn_count_labels(const char *name) {
-	int i, len, count;
-
-	len = strlen(name);
-	for (i = 0, count = 0; i < len; i++) {
-		/* XXX need to check for \. or use named's nlabels(). */
-		if (name[i] == '.')
-			count++;
-	}
-
-	/* don't count initial wildcard */
-	if (name[0] == '*')
-		if (count)
-			count--;
-
-	/* don't count the null label for root. */
-	/* if terminating '.' not found, must adjust */
-	/* count to include last label */
-	if (len > 0 && name[len-1] != '.')
-		count++;
-	return (count);
-}
-
-
-/* 
- * Make dates expressed in seconds-since-Jan-1-1970 easy to read.  
- * SIG records are required to be printed like this, by the Secure DNS RFC.
- */
-char *
-p_secstodate (u_long secs) {
-	static char output[15];		/* YYYYMMDDHHMMSS and null */
-	time_t clock = secs;
-	struct tm *time;
-	
-	time = gmtime(&clock);
-	time->tm_year += 1900;
-	time->tm_mon += 1;
-	sprintf(output, "%04d%02d%02d%02d%02d%02d",
-		time->tm_year, time->tm_mon, time->tm_mday,
-		time->tm_hour, time->tm_min, time->tm_sec);
-	return (output);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef fp_resstat
-__weak_reference(__fp_resstat, fp_resstat);
-#undef p_query
-__weak_reference(__p_query, p_query);
-#undef p_fqnname
-__weak_reference(__p_fqnname, p_fqnname);
-#undef sym_ston
-__weak_reference(__sym_ston, sym_ston);
-#undef sym_ntos
-__weak_reference(__sym_ntos, sym_ntos);
-#undef sym_ntop
-__weak_reference(__sym_ntop, sym_ntop);
-#undef dn_count_labels
-__weak_reference(__dn_count_labels, dn_count_labels);
-#undef p_secstodate
-__weak_reference(__p_secstodate, p_secstodate);
diff --git a/newlib/libc/sys/linux/net/res_init.c b/newlib/libc/sys/linux/net/res_init.c
deleted file mode 100644
index 21f2696cd..000000000
--- a/newlib/libc/sys/linux/net/res_init.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/*
- * Copyright (c) 1985, 1989, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_init.c	8.1 (Berkeley) 6/7/93";
-static char orig_rcsid[] = "From: Id: res_init.c,v 8.7 1996/11/18 09:10:04 vixie Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <ctype.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <netdb.h>
-
-#include "res_config.h"
-
-static void res_setoptions(char *, char *);
-
-#ifdef RESOLVSORT
-static const char sort_mask[] = "/&";
-#define ISSORTMASK(ch) (strchr(sort_mask, ch) != NULL)
-static u_int32_t net_mask(struct in_addr);
-#endif
-
-#if !defined(isascii) /* XXX - could be a function */
-# define isascii(c) (!(c & 0200))
-#endif
-
-/*
- * Resolver state default settings.
- */
-
-struct __res_state _res
-# if defined(__BIND_RES_TEXT)
-	= { RES_TIMEOUT, }	/* Motorola, et al. */
-# endif
-	;
-
-struct __res_state_ext _res_ext;
-
-/*
- * Set up default settings.  If the configuration file exist, the values
- * there will have precedence.  Otherwise, the server address is set to
- * INADDR_ANY and the default domain name comes from the gethostname().
- *
- * An interrim version of this code (BIND 4.9, pre-4.4BSD) used 127.0.0.1
- * rather than INADDR_ANY ("0.0.0.0") as the default name server address
- * since it was noted that INADDR_ANY actually meant ``the first interface
- * you "ifconfig"'d at boot time'' and if this was a SLIP or PPP interface,
- * it had to be "up" in order for you to reach your own name server.  It
- * was later decided that since the recommended practice is to always 
- * install local static routes through 127.0.0.1 for all your network
- * interfaces, that we could solve this problem without a code change.
- *
- * The configuration file should always be used, since it is the only way
- * to specify a default domain.  If you are running a server on your local
- * machine, you should say "nameserver 0.0.0.0" or "nameserver 127.0.0.1"
- * in the configuration file.
- *
- * Return 0 if completes successfully, -1 on error
- */
-int
-res_init()
-{
-	FILE *fp;
-	char *cp, **pp;
-	int n;
-	char buf[MAXDNAME];
-	int nserv = 0;    /* number of nameserver records read from file */
-	int haveenv = 0;
-	int havesearch = 0;
-#ifdef RESOLVSORT
-	int nsort = 0;
-	char *net;
-#endif
-#ifndef RFC1535
-	int dots;
-#endif
-	int sin_len;
-
-	/*
-	 * These three fields used to be statically initialized.  This made
-	 * it hard to use this code in a shared library.  It is necessary,
-	 * now that we're doing dynamic initialization here, that we preserve
-	 * the old semantics: if an application modifies one of these three
-	 * fields of _res before res_init() is called, res_init() will not
-	 * alter them.  Of course, if an application is setting them to
-	 * _zero_ before calling res_init(), hoping to override what used
-	 * to be the static default, we can't detect it and unexpected results
-	 * will follow.  Zero for any of these fields would make no sense,
-	 * so one can safely assume that the applications were already getting
-	 * unexpected results.
-	 *
-	 * _res.options is tricky since some apps were known to diddle the bits
-	 * before res_init() was first called. We can't replicate that semantic
-	 * with dynamic initialization (they may have turned bits off that are
-	 * set in RES_DEFAULT).  Our solution is to declare such applications
-	 * "broken".  They could fool us by setting RES_INIT but none do (yet).
-	 */
-	if (!_res.retrans)
-		_res.retrans = RES_TIMEOUT;
-	if (!_res.retry)
-		_res.retry = 4;
-	if (!(_res.options & RES_INIT))
-		_res.options = RES_DEFAULT;
-
-	/*
-	 * This one used to initialize implicitly to zero, so unless the app
-	 * has set it to something in particular, we can randomize it now.
-	 */
-	if (!_res.id)
-		_res.id = res_randomid();
-
-#ifdef USELOOPBACK
-	_res.nsaddr.sin_addr = inet_makeaddr(IN_LOOPBACKNET, 1);
-#else
-	_res.nsaddr.sin_addr.s_addr = INADDR_ANY;
-#endif
-	_res.nsaddr.sin_family = AF_INET;
-	_res.nsaddr.sin_port = htons(NAMESERVER_PORT);
-	sin_len = sizeof(struct sockaddr_in);
-	if (sizeof(_res_ext.nsaddr) >= sin_len)
-		memcpy(&_res_ext.nsaddr, &_res.nsaddr, sin_len);
-	_res.nscount = 1;
-	_res.ndots = 1;
-	_res.pfcode = 0;
-
-	/* Allow user to override the local domain definition */
-	if (issetugid() == 0 && (cp = getenv("LOCALDOMAIN")) != NULL) {
-		(void)strncpy(_res.defdname, cp, sizeof(_res.defdname) - 1);
-		_res.defdname[sizeof(_res.defdname) - 1] = '\0';
-		haveenv++;
-
-		/*
-		 * Set search list to be blank-separated strings
-		 * from rest of env value.  Permits users of LOCALDOMAIN
-		 * to still have a search list, and anyone to set the
-		 * one that they want to use as an individual (even more
-		 * important now that the rfc1535 stuff restricts searches)
-		 */
-		cp = _res.defdname;
-		pp = _res.dnsrch;
-		*pp++ = cp;
-		for (n = 0; *cp && pp < _res.dnsrch + MAXDNSRCH; cp++) {
-			if (*cp == '\n')	/* silly backwards compat */
-				break;
-			else if (*cp == ' ' || *cp == '\t') {
-				*cp = 0;
-				n = 1;
-			} else if (n) {
-				*pp++ = cp;
-				n = 0;
-				havesearch = 1;
-			}
-		}
-		/* null terminate last domain if there are excess */
-		while (*cp != '\0' && *cp != ' ' && *cp != '\t' && *cp != '\n')
-			cp++;
-		*cp = '\0';
-		*pp++ = 0;
-	}
-
-#define	MATCH(line, name) \
-	(!strncmp(line, name, sizeof(name) - 1) && \
-	(line[sizeof(name) - 1] == ' ' || \
-	 line[sizeof(name) - 1] == '\t'))
-
-	if ((fp = fopen(_PATH_RESCONF, "r")) != NULL) {
-	    /* read the config file */
-	    while (fgets(buf, sizeof(buf), fp) != NULL) {
-		/* skip comments */
-		if (*buf == ';' || *buf == '#')
-			continue;
-		/* read default domain name */
-		if (MATCH(buf, "domain")) {
-		    if (haveenv)	/* skip if have from environ */
-			    continue;
-		    cp = buf + sizeof("domain") - 1;
-		    while (*cp == ' ' || *cp == '\t')
-			    cp++;
-		    if ((*cp == '\0') || (*cp == '\n'))
-			    continue;
-		    strncpy(_res.defdname, cp, sizeof(_res.defdname) - 1);
-		    _res.defdname[sizeof(_res.defdname) - 1] = '\0';
-		    if ((cp = strpbrk(_res.defdname, " \t\n")) != NULL)
-			    *cp = '\0';
-		    havesearch = 0;
-		    continue;
-		}
-		/* set search list */
-		if (MATCH(buf, "search")) {
-		    if (haveenv)	/* skip if have from environ */
-			    continue;
-		    cp = buf + sizeof("search") - 1;
-		    while (*cp == ' ' || *cp == '\t')
-			    cp++;
-		    if ((*cp == '\0') || (*cp == '\n'))
-			    continue;
-		    strncpy(_res.defdname, cp, sizeof(_res.defdname) - 1);
-		    _res.defdname[sizeof(_res.defdname) - 1] = '\0';
-		    if ((cp = strchr(_res.defdname, '\n')) != NULL)
-			    *cp = '\0';
-		    /*
-		     * Set search list to be blank-separated strings
-		     * on rest of line.
-		     */
-		    cp = _res.defdname;
-		    pp = _res.dnsrch;
-		    *pp++ = cp;
-		    for (n = 0; *cp && pp < _res.dnsrch + MAXDNSRCH; cp++) {
-			    if (*cp == ' ' || *cp == '\t') {
-				    *cp = 0;
-				    n = 1;
-			    } else if (n) {
-				    *pp++ = cp;
-				    n = 0;
-			    }
-		    }
-		    /* null terminate last domain if there are excess */
-		    while (*cp != '\0' && *cp != ' ' && *cp != '\t')
-			    cp++;
-		    *cp = '\0';
-		    *pp++ = 0;
-		    havesearch = 1;
-		    continue;
-		}
-		/* read nameservers to query */
-		if (MATCH(buf, "nameserver") && nserv < MAXNS) {
-		    char *q;
-		    struct addrinfo hints, *res;
-		    char pbuf[NI_MAXSERV];
-
-		    cp = buf + sizeof("nameserver") - 1;
-		    while (*cp == ' ' || *cp == '\t')
-			cp++;
-		    if ((*cp == '\0') || (*cp == '\n'))
-			continue;
-		    for (q = cp; *q; q++) {
-			if (isspace(*q)) {
-			    *q = '\0';
-			    break;
-			}
-		    }
-		    memset(&hints, 0, sizeof(hints));
-		    hints.ai_flags = AI_NUMERICHOST;
-		    hints.ai_socktype = SOCK_DGRAM;
-		    snprintf(pbuf, sizeof(pbuf), "%d", NAMESERVER_PORT);
-		    if (getaddrinfo(cp, pbuf, &hints, &res) == 0 &&
-			    res->ai_next == NULL) {
-			if (res->ai_addrlen <= sizeof(_res_ext.nsaddr_list[nserv])) {
-			    memcpy(&_res_ext.nsaddr_list[nserv], res->ai_addr,
-				res->ai_addrlen);
-			} else {
-			    memset(&_res_ext.nsaddr_list[nserv], 0,
-				sizeof(_res_ext.nsaddr_list[nserv]));
-			}
-			if (res->ai_addrlen <= sizeof(_res.nsaddr_list[nserv])) {
-			    memcpy(&_res.nsaddr_list[nserv], res->ai_addr,
-				res->ai_addrlen);
-			} else {
-			    memset(&_res.nsaddr_list[nserv], 0,
-				sizeof(_res.nsaddr_list[nserv]));
-			}
-			nserv++;
-		    }
-		    if (res)
-			    freeaddrinfo(res);
-		    continue;
-		}
-#ifdef RESOLVSORT
-		if (MATCH(buf, "sortlist")) {
-		    struct in_addr a;
-		    struct in6_addr a6;
-		    int m, i;
-		    u_char *u;
-
-		    cp = buf + sizeof("sortlist") - 1;
-		    while (nsort < MAXRESOLVSORT) {
-			while (*cp == ' ' || *cp == '\t')
-			    cp++;
-			if (*cp == '\0' || *cp == '\n' || *cp == ';')
-			    break;
-			net = cp;
-			while (*cp && !ISSORTMASK(*cp) && *cp != ';' &&
-			       isascii(*cp) && !isspace(*cp))
-				cp++;
-			n = *cp;
-			*cp = 0;
-			if (inet_aton(net, &a)) {
-			    _res.sort_list[nsort].addr = a;
-			    if (ISSORTMASK(n)) {
-				*cp++ = n;
-				net = cp;
-				while (*cp && *cp != ';' &&
-					isascii(*cp) && !isspace(*cp))
-				    cp++;
-				n = *cp;
-				*cp = 0;
-				if (inet_aton(net, &a)) {
-				    _res.sort_list[nsort].mask = a.s_addr;
-				} else {
-				    _res.sort_list[nsort].mask = 
-					net_mask(_res.sort_list[nsort].addr);
-				}
-			    } else {
-				_res.sort_list[nsort].mask = 
-				    net_mask(_res.sort_list[nsort].addr);
-			    }
-			    _res_ext.sort_list[nsort].af = AF_INET;
-			    _res_ext.sort_list[nsort].addr.ina =
-				_res.sort_list[nsort].addr;
-			    _res_ext.sort_list[nsort].mask.ina.s_addr =
-				_res.sort_list[nsort].mask;
-			    nsort++;
-			}
-			else if (inet_pton(AF_INET6, net, &a6) == 1) {
-
-			    _res_ext.sort_list[nsort].af = AF_INET6;
-			    _res_ext.sort_list[nsort].addr.in6a = a6;
-			    u = (u_char *)&_res_ext.sort_list[nsort].mask.in6a;
-			    *cp++ = n;
-			    net = cp;
-			    while (*cp && *cp != ';' &&
-				    isascii(*cp) && !isspace(*cp))
-				cp++;
-			    m = n;
-			    n = *cp;
-			    *cp = 0;
-			    switch (m) {
-			    case '/':
-				m = atoi(net);
-				break;
-			    case '&':
-				if (inet_pton(AF_INET6, net, u) == 1) {
-				    m = -1;
-				    break;
-				}
-				/*FALLTHROUGH*/
-			    default:
-				m = sizeof(struct in6_addr) * NBBY;
-				break;
-			    }
-			    if (m >= 0) {
-				for (i = 0; i < sizeof(struct in6_addr); i++) {
-				    if (m <= 0) {
-					*u = 0;
-				    } else {
-					m -= NBBY;
-					*u = (u_char)~0;
-					if (m < 0)
-					    *u <<= -m;
-				    }
-				    u++;
-				}
-			    }
-			    _res.sort_list[nsort].addr.s_addr =
-				(u_int32_t)0xffffffff;
-			    _res.sort_list[nsort].mask = (u_int32_t)0xffffffff;
-			    nsort++;
-			}
-			*cp = n;
-		    }
-		    continue;
-		}
-#endif
-		if (MATCH(buf, "options")) {
-		    res_setoptions(buf + sizeof("options") - 1, "conf");
-		    continue;
-		}
-	    }
-	    if (nserv > 1) 
-		_res.nscount = nserv;
-#ifdef RESOLVSORT
-	    _res.nsort = nsort;
-#endif
-	    (void) fclose(fp);
-	}
-	if (_res.defdname[0] == 0 &&
-	    gethostname(buf, sizeof(_res.defdname) - 1) == 0 &&
-	    (cp = strchr(buf, '.')) != NULL)
-		strcpy(_res.defdname, cp + 1);
-
-	/* find components of local domain that might be searched */
-	if (havesearch == 0) {
-		pp = _res.dnsrch;
-		*pp++ = _res.defdname;
-		*pp = NULL;
-
-#ifndef RFC1535
-		dots = 0;
-		for (cp = _res.defdname; *cp; cp++)
-			dots += (*cp == '.');
-
-		cp = _res.defdname;
-		while (pp < _res.dnsrch + MAXDFLSRCH) {
-			if (dots < LOCALDOMAINPARTS)
-				break;
-			cp = strchr(cp, '.') + 1;    /* we know there is one */
-			*pp++ = cp;
-			dots--;
-		}
-		*pp = NULL;
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG) {
-			printf(";; res_init()... default dnsrch list:\n");
-			for (pp = _res.dnsrch; *pp; pp++)
-				printf(";;\t%s\n", *pp);
-			printf(";;\t..END..\n");
-		}
-#endif
-#endif /* !RFC1535 */
-	}
-
-	if (issetugid())
-		_res.options |= RES_NOALIASES;
-	else if ((cp = getenv("RES_OPTIONS")) != NULL)
-		res_setoptions(cp, "env");
-	_res.options |= RES_INIT;
-	return (0);
-}
-
-static void
-res_setoptions(options, source)
-	char *options, *source;
-{
-	char *cp = options;
-	int i;
-
-#ifdef DEBUG
-	if (_res.options & RES_DEBUG)
-		printf(";; res_setoptions(\"%s\", \"%s\")...\n",
-		       options, source);
-#endif
-	while (*cp) {
-		/* skip leading and inner runs of spaces */
-		while (*cp == ' ' || *cp == '\t')
-			cp++;
-		/* search for and process individual options */
-		if (!strncmp(cp, "ndots:", sizeof("ndots:") - 1)) {
-			i = atoi(cp + sizeof("ndots:") - 1);
-			if (i <= RES_MAXNDOTS)
-				_res.ndots = i;
-			else
-				_res.ndots = RES_MAXNDOTS;
-#ifdef DEBUG
-			if (_res.options & RES_DEBUG)
-				printf(";;\tndots=%d\n", _res.ndots);
-#endif
-		} else if (!strncmp(cp, "debug", sizeof("debug") - 1)) {
-#ifdef DEBUG
-			if (!(_res.options & RES_DEBUG)) {
-				printf(";; res_setoptions(\"%s\", \"%s\")..\n",
-				       options, source);
-				_res.options |= RES_DEBUG;
-			}
-			printf(";;\tdebug\n");
-#endif
-		} else if (!strncmp(cp, "inet6", sizeof("inet6") - 1)) {
-			_res.options |= RES_USE_INET6;
-		} else if (!strncmp(cp, "insecure1", sizeof("insecure1") - 1)) {
-		       _res.options |= RES_INSECURE1;
-		} else if (!strncmp(cp, "insecure2", sizeof("insecure2") - 1)) {
-		       _res.options |= RES_INSECURE2;
-		} else if (!strncmp(cp, "no_tld_query", sizeof("no_tld_query") - 1)) {
-			_res.options |= RES_NOTLDQUERY;
-		} else if (!strncmp(cp, "edns0", sizeof("edns0") - 1)) {
-		       _res.options |= RES_USE_EDNS0;
-		} else {
-			/* XXX - print a warning here? */
-		}
-		/* skip to next run of spaces */
-		while (*cp && *cp != ' ' && *cp != '\t')
-			cp++;
-	}
-}
-
-#ifdef RESOLVSORT
-/* XXX - should really support CIDR which means explicit masks always. */
-static u_int32_t
-net_mask(in)		/* XXX - should really use system's version of this */
-	struct in_addr in;
-{
-	u_int32_t i = ntohl(in.s_addr);
-
-	if (IN_CLASSA(i))
-		return (htonl(IN_CLASSA_NET));
-	else if (IN_CLASSB(i))
-		return (htonl(IN_CLASSB_NET));
-	return (htonl(IN_CLASSC_NET));
-}
-#endif
-
-u_int
-res_randomid()
-{
-	struct timeval now;
-
-	gettimeofday(&now, NULL);
-	return (0xffff & (now.tv_sec ^ now.tv_usec ^ getpid()));
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef res_init
-__weak_reference(__res_init, res_init);
diff --git a/newlib/libc/sys/linux/net/res_mkquery.c b/newlib/libc/sys/linux/net/res_mkquery.c
deleted file mode 100644
index 0c6cca9c4..000000000
--- a/newlib/libc/sys/linux/net/res_mkquery.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Copyright (c) 1985, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_mkquery.c	8.1 (Berkeley) 6/4/93";
-static char orig_rcsid[] = "From: Id: res_mkquery.c,v 8.9 1997/04/24 22:22:36 vixie Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "res_config.h"
-
-/*
- * Form all types of queries.
- * Returns the size of the result or -1.
- */
-int
-res_mkquery(op, dname, class, type, data, datalen, newrr_in, buf, buflen)
-	int op;			/* opcode of query */
-	const char *dname;	/* domain name */
-	int class, type;	/* class and type of query */
-	const u_char *data;	/* resource record data */
-	int datalen;		/* length of data */
-	const u_char *newrr_in;	/* new rr for modify or append */
-	u_char *buf;		/* buffer to put query */
-	int buflen;		/* size of buffer */
-{
-	HEADER *hp;
-	u_char *cp;
-	int n;
-	u_char *dnptrs[20], **dpp, **lastdnptr;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-#ifdef DEBUG
-	if (_res.options & RES_DEBUG)
-		printf(";; res_mkquery(%d, %s, %d, %d)\n",
-		       op, dname, class, type);
-#endif
-	/*
-	 * Initialize header fields.
-	 */
-	if ((buf == NULL) || (buflen < HFIXEDSZ))
-		return (-1);
-	memset(buf, 0, HFIXEDSZ);
-	hp = (HEADER *) buf;
-	hp->id = htons(++_res.id);
-	hp->opcode = op;
-	hp->rd = (_res.options & RES_RECURSE) != 0;
-	hp->rcode = NOERROR;
-	cp = buf + HFIXEDSZ;
-	buflen -= HFIXEDSZ;
-	dpp = dnptrs;
-	*dpp++ = buf;
-	*dpp++ = NULL;
-	lastdnptr = dnptrs + sizeof dnptrs / sizeof dnptrs[0];
-	/*
-	 * perform opcode specific processing
-	 */
-	switch (op) {
-	case QUERY:	/*FALLTHROUGH*/
-	case NS_NOTIFY_OP:
-		if ((buflen -= QFIXEDSZ) < 0)
-			return (-1);
-		if ((n = dn_comp(dname, cp, buflen, dnptrs, lastdnptr)) < 0)
-			return (-1);
-		cp += n;
-		buflen -= n;
-		__putshort(type, cp);
-		cp += INT16SZ;
-		__putshort(class, cp);
-		cp += INT16SZ;
-		hp->qdcount = htons(1);
-		if (op == QUERY || data == NULL)
-			break;
-		/*
-		 * Make an additional record for completion domain.
-		 */
-		buflen -= RRFIXEDSZ;
-		n = dn_comp((char *)data, cp, buflen, dnptrs, lastdnptr);
-		if (n < 0)
-			return (-1);
-		cp += n;
-		buflen -= n;
-		__putshort(T_NULL, cp);
-		cp += INT16SZ;
-		__putshort(class, cp);
-		cp += INT16SZ;
-		__putlong(0, cp);
-		cp += INT32SZ;
-		__putshort(0, cp);
-		cp += INT16SZ;
-		hp->arcount = htons(1);
-		break;
-
-	case IQUERY:
-		/*
-		 * Initialize answer section
-		 */
-		if (buflen < 1 + RRFIXEDSZ + datalen)
-			return (-1);
-		*cp++ = '\0';	/* no domain name */
-		__putshort(type, cp);
-		cp += INT16SZ;
-		__putshort(class, cp);
-		cp += INT16SZ;
-		__putlong(0, cp);
-		cp += INT32SZ;
-		__putshort(datalen, cp);
-		cp += INT16SZ;
-		if (datalen) {
-			memcpy(cp, data, datalen);
-			cp += datalen;
-		}
-		hp->ancount = htons(1);
-		break;
-
-	default:
-		return (-1);
-	}
-	return (cp - buf);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef res_mkquery
-__weak_reference(__res_mkquery, res_mkquery);
-
-/* attach OPT pseudo-RR, as documented in RFC2671 (EDNS0). */
-int
-res_opt(n0, buf, buflen, anslen)
-	int n0;
-	u_char *buf;		/* buffer to put query */
-	int buflen;		/* size of buffer */
-	int anslen;		/* answer buffer length */
-{
-	HEADER *hp;
-	u_char *cp;
-
-	hp = (HEADER *) buf;
-	cp = buf + n0;
-	buflen -= n0;
-
-	if (buflen < 1 + RRFIXEDSZ)
-		return -1;
-
-	*cp++ = 0;	/* "." */
-	buflen--;
-
-	__putshort(T_OPT, cp);	/* TYPE */
-	cp += INT16SZ;
-	__putshort(anslen & 0xffff, cp);	/* CLASS = UDP payload size */
-	cp += INT16SZ;
-	*cp++ = NOERROR;	/* extended RCODE */
-	*cp++ = 0;		/* EDNS version */
-	__putshort(0, cp);	/* MBZ */
-	cp += INT16SZ;
-	__putshort(0, cp);	/* RDLEN */
-	cp += INT16SZ;
-	hp->arcount = htons(ntohs(hp->arcount) + 1);
-	buflen -= RRFIXEDSZ;
-
-	return cp - buf;
-}
diff --git a/newlib/libc/sys/linux/net/res_mkupdate.c b/newlib/libc/sys/linux/net/res_mkupdate.c
deleted file mode 100644
index 4e21fe8cf..000000000
--- a/newlib/libc/sys/linux/net/res_mkupdate.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Based on the Dynamic DNS reference implementation by Viraj Bais
- * <viraj_bais@ccm.fm.intel.com>
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-
-#include <limits.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-
-#include "res_config.h"
-
-static int getnum_str(u_char **, u_char *);
-static int getword_str(char *, int, u_char **, u_char *);
-
-#define ShrinkBuffer(x)  if ((buflen -= x) < 0) return (-2);
-
-/*
- * Form update packets.
- * Returns the size of the resulting packet if no error
- * On error,
- *	returns -1 if error in reading a word/number in rdata
- *		   portion for update packets
- *		-2 if length of buffer passed is insufficient
- *		-3 if zone section is not the first section in
- *		   the linked list, or section order has a problem
- *		-4 on a number overflow
- *		-5 unknown operation or no records
- */
-int
-res_mkupdate(ns_updrec *rrecp_in, u_char *buf, int buflen) {
-	ns_updrec *rrecp_start = rrecp_in;
-	HEADER *hp;
-	u_char *cp, *sp1, *sp2, *startp, *endp;
-	int n, i, soanum, multiline;
-	ns_updrec *rrecp;
-	struct in_addr ina;
-        char buf2[MAXDNAME];
-	int section, numrrs = 0, counts[ns_s_max];
-	u_int16_t rtype, rclass;
-	u_int32_t n1, rttl;
-	u_char *dnptrs[20], **dpp, **lastdnptr;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-
-	/*
-	 * Initialize header fields.
-	 */
-	if ((buf == NULL) || (buflen < HFIXEDSZ))
-		return (-1);
-	memset(buf, 0, HFIXEDSZ);
-	hp = (HEADER *) buf;
-	hp->id = htons(++_res.id);
-	hp->opcode = ns_o_update;
-	hp->rcode = NOERROR;
-	sp1 = buf + 2*INT16SZ;  /* save pointer to zocount */
-	cp = buf + HFIXEDSZ;
-	buflen -= HFIXEDSZ;
-	dpp = dnptrs;
-	*dpp++ = buf;
-	*dpp++ = NULL;
-	lastdnptr = dnptrs + sizeof dnptrs / sizeof dnptrs[0];
-
-	if (rrecp_start == NULL)
-		return (-5);
-	else if (rrecp_start->r_section != S_ZONE)
-		return (-3);
-
-	memset(counts, 0, sizeof counts);
-	for (rrecp = rrecp_start; rrecp; rrecp = rrecp->r_grpnext) {
-		numrrs++;
-                section = rrecp->r_section;
-		if (section < 0 || section >= ns_s_max)
-			return (-1);
-		counts[section]++;
-		for (i = section + 1; i < ns_s_max; i++)
-			if (counts[i])
-				return (-3);
-		rtype = rrecp->r_type;
-		rclass = rrecp->r_class;
-		rttl = rrecp->r_ttl;
-		/* overload class and type */
-		if (section == S_PREREQ) {
-			rttl = 0;
-			switch (rrecp->r_opcode) {
-			case YXDOMAIN:
-				rclass = C_ANY;
-				rtype = T_ANY;
-				rrecp->r_size = 0;
-				break;
-			case NXDOMAIN:
-				rclass = C_NONE;
-				rtype = T_ANY;
-				rrecp->r_size = 0;
-				break;
-			case NXRRSET:
-				rclass = C_NONE;
-				rrecp->r_size = 0;
-				break;
-			case YXRRSET:
-				if (rrecp->r_size == 0)
-					rclass = C_ANY;
-				break;
-			default:
-				fprintf(stderr,
-					"res_mkupdate: incorrect opcode: %d\n",
-					rrecp->r_opcode);
-				fflush(stderr);
-				return (-1);
-			}
-		} else if (section == S_UPDATE) {
-			switch (rrecp->r_opcode) {
-			case DELETE:
-				rclass = rrecp->r_size == 0 ? C_ANY : C_NONE;
-				break;
-			case ADD:
-				break;
-			default:
-				fprintf(stderr,
-					"res_mkupdate: incorrect opcode: %d\n",
-					rrecp->r_opcode);
-				fflush(stderr);
-				return (-1);
-			}
-		}
-
-		/*
-		 * XXX	appending default domain to owner name is omitted,
-		 *	fqdn must be provided
-		 */
-		if ((n = dn_comp(rrecp->r_dname, cp, buflen, dnptrs,
-				 lastdnptr)) < 0)
-			return (-1);
-		cp += n;
-		ShrinkBuffer(n + 2*INT16SZ);
-		PUTSHORT(rtype, cp);
-		PUTSHORT(rclass, cp);
-		if (section == S_ZONE) {
-			if (numrrs != 1 || rrecp->r_type != T_SOA)
-				return (-3);
-			continue;
-		}
-		ShrinkBuffer(INT32SZ + INT16SZ);
-		PUTLONG(rttl, cp);
-		sp2 = cp;  /* save pointer to length byte */
-		cp += INT16SZ;
-		if (rrecp->r_size == 0) {
-			if (section == S_UPDATE && rclass != C_ANY)
-				return (-1);
-			else {
-				PUTSHORT(0, sp2);
-				continue;
-			}
-		}
-		startp = rrecp->r_data;
-		endp = startp + rrecp->r_size - 1;
-		/* XXX this should be done centrally. */
-		switch (rrecp->r_type) {
-		case T_A:
-			if (!getword_str(buf2, sizeof buf2, &startp, endp))
-				return (-1);
-			if (!inet_aton(buf2, &ina))
-				return (-1);
-			n1 = ntohl(ina.s_addr);
-			ShrinkBuffer(INT32SZ);
-			PUTLONG(n1, cp);
-			break;
-		case T_CNAME:
-		case T_MB:
-		case T_MG:
-		case T_MR:
-		case T_NS:
-		case T_PTR:
-			if (!getword_str(buf2, sizeof buf2, &startp, endp))
-				return (-1);
-			n = dn_comp(buf2, cp, buflen, dnptrs, lastdnptr);
-			if (n < 0)
-				return (-1);
-			cp += n;
-			ShrinkBuffer(n);
-			break;
-		case T_MINFO:
-		case T_SOA:
-		case T_RP:
-			for (i = 0; i < 2; i++) {
-				if (!getword_str(buf2, sizeof buf2, &startp,
-						 endp))
-				return (-1);
-				n = dn_comp(buf2, cp, buflen,
-					    dnptrs, lastdnptr);
-				if (n < 0)
-					return (-1);
-				cp += n;
-				ShrinkBuffer(n);
-			}
-			if (rrecp->r_type == T_SOA) {
-				ShrinkBuffer(5 * INT32SZ);
-				while (isspace(*startp) || !*startp)
-					startp++;
-				if (*startp == '(') {
-					multiline = 1;
-					startp++;
-				} else
-					multiline = 0;
-				/* serial, refresh, retry, expire, minimum */
-				for (i = 0; i < 5; i++) {
-					soanum = getnum_str(&startp, endp);
-					if (soanum < 0)
-						return (-1);
-					PUTLONG(soanum, cp);
-				}
-				if (multiline) {
-					while (isspace(*startp) || !*startp)
-						startp++;
-					if (*startp != ')')
-						return (-1);
-				}
-			}
-			break;
-		case T_MX:
-		case T_AFSDB:
-		case T_RT:
-			n = getnum_str(&startp, endp);
-			if (n < 0)
-				return (-1);
-			PUTSHORT(n, cp);
-			ShrinkBuffer(INT16SZ);
-			if (!getword_str(buf2, sizeof buf2, &startp, endp))
-				return (-1);
-			n = dn_comp(buf2, cp, buflen, dnptrs, lastdnptr);
-			if (n < 0)
-				return (-1);
-			cp += n;
-			ShrinkBuffer(n);
-			break;
-		case T_PX:
-			n = getnum_str(&startp, endp);
-			if (n < 0)
-				return (-1);
-			PUTSHORT(n, cp);
-			ShrinkBuffer(INT16SZ);
-			for (i = 0; i < 2; i++) {
-				if (!getword_str(buf2, sizeof buf2, &startp,
-						 endp))
-					return (-1);
-				n = dn_comp(buf2, cp, buflen, dnptrs,
-					    lastdnptr);
-				if (n < 0)
-					return (-1);
-				cp += n;
-				ShrinkBuffer(n);
-			}
-			break;
-		case T_WKS:
-		case T_HINFO:
-		case T_TXT:
-		case T_X25:
-		case T_ISDN:
-		case T_NSAP:
-		case T_LOC:
-			/* XXX - more fine tuning needed here */
-			ShrinkBuffer(rrecp->r_size);
-			memcpy(cp, rrecp->r_data, rrecp->r_size);
-			cp += rrecp->r_size;
-			break;
-		default:
-			return (-1);
-		} /*switch*/
-		n = (u_int16_t)((cp - sp2) - INT16SZ);
-		PUTSHORT(n, sp2);
-	} /*for*/
-		
-	hp->qdcount = htons(counts[0]);
-	hp->ancount = htons(counts[1]);
-	hp->nscount = htons(counts[2]);
-	hp->arcount = htons(counts[3]);
-	return (cp - buf);
-}
-
-/*
- * Get a whitespace delimited word from a string (not file)
- * into buf. modify the start pointer to point after the
- * word in the string.
- */
-static int
-getword_str(char *buf, int size, u_char **startpp, u_char *endp) {
-        char *cp;
-        int c;
- 
-        for (cp = buf; *startpp <= endp; ) {
-                c = **startpp;
-                if (isspace(c) || c == '\0') {
-                        if (cp != buf) /* trailing whitespace */
-                                break;
-                        else { /* leading whitespace */
-                                (*startpp)++;
-                                continue;
-                        }
-                }
-                (*startpp)++;
-                if (cp >= buf+size-1)
-                        break;
-                *cp++ = (u_char)c;
-        }
-        *cp = '\0';
-        return (cp != buf);
-}
-
-/*
- * Get a whitespace delimited number from a string (not file) into buf
- * update the start pointer to point after the number in the string.
- */
-static int
-getnum_str(u_char **startpp, u_char *endp) {
-        int c, n;
-        int seendigit = 0;
-        int m = 0;
-
-        for (n = 0; *startpp <= endp; ) {
-                c = **startpp;
-                if (isspace(c) || c == '\0') {
-                        if (seendigit) /* trailing whitespace */
-                                break;
-                        else { /* leading whitespace */
-                                (*startpp)++;
-                                continue;
-                        }
-                }
-                if (c == ';') {
-                        while ((*startpp <= endp) &&
-			       ((c = **startpp) != '\n'))
-					(*startpp)++;
-                        if (seendigit)
-                                break;
-                        continue;
-                }
-                if (!isdigit(c)) {
-                        if (c == ')' && seendigit) {
-                                (*startpp)--;
-                                break;
-                        }
-			return (-1);
-                }        
-                (*startpp)++;
-                n = n * 10 + (c - '0');
-                seendigit = 1;
-        }
-        return (n + m);
-}
-
-/*
- * Allocate a resource record buffer & save rr info.
- */
-ns_updrec *
-res_mkupdrec(int section, const char *dname,
-	     u_int class, u_int type, u_long ttl) {
-	ns_updrec *rrecp = (ns_updrec *)calloc(1, sizeof(ns_updrec));
-
-	if (!rrecp || !(rrecp->r_dname = strdup(dname)))
-		return (NULL);
- 	rrecp->r_class = class;
-	rrecp->r_type = type;
-	rrecp->r_ttl = ttl;
-	rrecp->r_section = section;
-	return (rrecp);
-}
-
-/*
- * Free a resource record buffer created by res_mkupdrec.
- */
-void
-res_freeupdrec(ns_updrec *rrecp) {
-	/* Note: freeing r_dp is the caller's responsibility. */
-	if (rrecp->r_dname != NULL)
-		free(rrecp->r_dname);
-	free(rrecp);
-}
diff --git a/newlib/libc/sys/linux/net/res_query.c b/newlib/libc/sys/linux/net/res_query.c
deleted file mode 100644
index ee6775d99..000000000
--- a/newlib/libc/sys/linux/net/res_query.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * Copyright (c) 1988, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_query.c	8.1 (Berkeley) 6/4/93";
-static char orig_rcsid = "From: Id: res_query.c,v 8.14 1997/06/09 17:47:05 halley Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <ctype.h>
-#include <errno.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "res_config.h"
-
-#if PACKETSZ > 1024
-#define MAXPACKET	PACKETSZ
-#else
-#define MAXPACKET	1024
-#endif
-
-/*
- * Formulate a normal query, send, and await answer.
- * Returned answer is placed in supplied buffer "answer".
- * Perform preliminary check of answer, returning success only
- * if no error is indicated and the answer count is nonzero.
- * Return the size of the response on success, -1 on error.
- * Error number is left in h_errno.
- *
- * Caller must parse answer and determine whether it answers the question.
- */
-int
-res_query(name, class, type, answer, anslen)
-	const char *name;	/* domain name */
-	int class, type;	/* class and type of query */
-	u_char *answer;		/* buffer to put answer */
-	int anslen;		/* size of answer buffer */
-{
-	u_char buf[MAXPACKET];
-	HEADER *hp = (HEADER *) answer;
-	int n;
-
-	hp->rcode = NOERROR;	/* default */
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-#ifdef DEBUG
-	if (_res.options & RES_DEBUG)
-		printf(";; res_query(%s, %d, %d)\n", name, class, type);
-#endif
-
-	n = res_mkquery(QUERY, name, class, type, NULL, 0, NULL,
-			buf, sizeof(buf));
-	if (n > 0 && (_res.options & RES_USE_EDNS0) != 0)
-		n = res_opt(n, buf, sizeof(buf), anslen);
-	if (n <= 0) {
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf(";; res_query: mkquery failed\n");
-#endif
-		h_errno = NO_RECOVERY;
-		return (n);
-	}
-	n = res_send(buf, n, answer, anslen);
-	if (n < 0) {
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf(";; res_query: send error\n");
-#endif
-		h_errno = TRY_AGAIN;
-		return (n);
-	}
-
-	if (hp->rcode != NOERROR || ntohs(hp->ancount) == 0) {
-#ifdef DEBUG
-		if (_res.options & RES_DEBUG)
-			printf(";; rcode = %d, ancount=%d\n", hp->rcode,
-			    ntohs(hp->ancount));
-#endif
-		switch (hp->rcode) {
-		case NXDOMAIN:
-			h_errno = HOST_NOT_FOUND;
-			break;
-		case SERVFAIL:
-			h_errno = TRY_AGAIN;
-			break;
-		case NOERROR:
-			h_errno = NO_DATA;
-			break;
-		case FORMERR:
-		case NOTIMP:
-		case REFUSED:
-		default:
-			h_errno = NO_RECOVERY;
-			break;
-		}
-		return (-1);
-	}
-	return (n);
-}
-
-/*
- * Formulate a normal query, send, and retrieve answer in supplied buffer.
- * Return the size of the response on success, -1 on error.
- * If enabled, implement search rules until answer or unrecoverable failure
- * is detected.  Error code, if any, is left in h_errno.
- */
-int
-res_search(name, class, type, answer, anslen)
-	const char *name;	/* domain name */
-	int class, type;	/* class and type of query */
-	u_char *answer;		/* buffer to put answer */
-	int anslen;		/* size of answer */
-{
-	const char *cp, * const *domain;
-	HEADER *hp = (HEADER *) answer;
-	u_int dots;
-	int trailing_dot, ret, saved_herrno;
-	int got_nodata = 0, got_servfail = 0, tried_as_is = 0;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-	errno = 0;
-	h_errno = HOST_NOT_FOUND;	/* default, if we never query */
-	dots = 0;
-	for (cp = name; *cp; cp++)
-		dots += (*cp == '.');
-	trailing_dot = 0;
-	if (cp > name && *--cp == '.')
-		trailing_dot++;
-
-	/* If there aren't any dots, it could be a user-level alias */
-	if (!dots && (cp = hostalias(name)) != NULL)
-		return (res_query(cp, class, type, answer, anslen));
-
-	/*
-	 * If there are dots in the name already, let's just give it a try
-	 * 'as is'.  The threshold can be set with the "ndots" option.
-	 */
-	saved_herrno = -1;
-	if (dots >= _res.ndots) {
-		ret = res_querydomain(name, NULL, class, type, answer, anslen);
-		if (ret > 0)
-			return (ret);
-		saved_herrno = h_errno;
-		tried_as_is++;
-	}
-
-	/*
-	 * We do at least one level of search if
-	 *	- there is no dot and RES_DEFNAME is set, or
-	 *	- there is at least one dot, there is no trailing dot,
-	 *	  and RES_DNSRCH is set.
-	 */
-	if ((!dots && (_res.options & RES_DEFNAMES)) ||
-	    (dots && !trailing_dot && (_res.options & RES_DNSRCH))) {
-		int done = 0;
-
-		for (domain = (const char * const *)_res.dnsrch;
-		     *domain && !done;
-		     domain++) {
-
-			ret = res_querydomain(name, *domain, class, type,
-					      answer, anslen);
-			if (ret > 0)
-				return (ret);
-
-			/*
-			 * If no server present, give up.
-			 * If name isn't found in this domain,
-			 * keep trying higher domains in the search list
-			 * (if that's enabled).
-			 * On a NO_DATA error, keep trying, otherwise
-			 * a wildcard entry of another type could keep us
-			 * from finding this entry higher in the domain.
-			 * If we get some other error (negative answer or
-			 * server failure), then stop searching up,
-			 * but try the input name below in case it's
-			 * fully-qualified.
-			 */
-			if (errno == ECONNREFUSED) {
-				h_errno = TRY_AGAIN;
-				return (-1);
-			}
-
-			switch (h_errno) {
-			case NO_DATA:
-				got_nodata++;
-				/* FALLTHROUGH */
-			case HOST_NOT_FOUND:
-				/* keep trying */
-				break;
-			case TRY_AGAIN:
-				if (hp->rcode == SERVFAIL) {
-					/* try next search element, if any */
-					got_servfail++;
-					break;
-				}
-				/* FALLTHROUGH */
-			default:
-				/* anything else implies that we're done */
-				done++;
-			}
-
-			/* if we got here for some reason other than DNSRCH,
-			 * we only wanted one iteration of the loop, so stop.
-			 */
-			if (!(_res.options & RES_DNSRCH))
-				done++;
-		}
-	}
-
-	/*
-	 * If we have not already tried the name "as is", do that now.
-	 * note that we do this regardless of how many dots were in the
-	 * name or whether it ends with a dot unless NOTLDQUERY is set.
-	 */
-	if (!tried_as_is && (dots || !(_res.options & RES_NOTLDQUERY))) {
-		ret = res_querydomain(name, NULL, class, type, answer, anslen);
-		if (ret > 0)
-			return (ret);
-	}
-
-	/* if we got here, we didn't satisfy the search.
-	 * if we did an initial full query, return that query's h_errno
-	 * (note that we wouldn't be here if that query had succeeded).
-	 * else if we ever got a nodata, send that back as the reason.
-	 * else send back meaningless h_errno, that being the one from
-	 * the last DNSRCH we did.
-	 */
-	if (saved_herrno != -1)
-		h_errno = saved_herrno;
-	else if (got_nodata)
-		h_errno = NO_DATA;
-	else if (got_servfail)
-		h_errno = TRY_AGAIN;
-	return (-1);
-}
-
-/*
- * Perform a call on res_query on the concatenation of name and domain,
- * removing a trailing dot from name if domain is NULL.
- */
-int
-res_querydomain(name, domain, class, type, answer, anslen)
-	const char *name, *domain;
-	int class, type;	/* class and type of query */
-	u_char *answer;		/* buffer to put answer */
-	int anslen;		/* size of answer */
-{
-	char nbuf[MAXDNAME];
-	const char *longname = nbuf;
-	int n, d;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-#ifdef DEBUG
-	if (_res.options & RES_DEBUG)
-		printf(";; res_querydomain(%s, %s, %d, %d)\n",
-		       name, domain?domain:"<Nil>", class, type);
-#endif
-	if (domain == NULL) {
-		/*
-		 * Check for trailing '.';
-		 * copy without '.' if present.
-		 */
-		n = strlen(name);
-		if (n >= MAXDNAME) {
-			h_errno = NO_RECOVERY;
-			return (-1);
-		}
-		n--;
-		if (n >= 0 && name[n] == '.') {
-			strncpy(nbuf, name, n);
-			nbuf[n] = '\0';
-		} else
-			longname = name;
-	} else {
-		n = strlen(name);
-		d = strlen(domain);
-		if (n + d + 1 >= MAXDNAME) {
-			h_errno = NO_RECOVERY;
-			return (-1);
-		}
-		sprintf(nbuf, "%s.%s", name, domain);
-	}
-	return (res_query(longname, class, type, answer, anslen));
-}
-
-const char *
-hostalias(name)
-	const char *name;
-{
-	char *cp1, *cp2;
-	FILE *fp;
-	char *file;
-	char buf[BUFSIZ];
-	static char abuf[MAXDNAME];
-
-	if (_res.options & RES_NOALIASES)
-		return (NULL);
-	if (issetugid())
-		return (NULL);
-	file = getenv("HOSTALIASES");
-	if (file == NULL || (fp = fopen(file, "r")) == NULL)
-		return (NULL);
-	setbuf(fp, NULL);
-	buf[sizeof(buf) - 1] = '\0';
-	while (fgets(buf, sizeof(buf), fp)) {
-		for (cp1 = buf; *cp1 && !isspace((unsigned char)*cp1); ++cp1)
-			;
-		if (!*cp1)
-			break;
-		*cp1 = '\0';
-		if (!strcasecmp(buf, name)) {
-			while (isspace((unsigned char)*++cp1))
-				;
-			if (!*cp1)
-				break;
-			for (cp2 = cp1 + 1; *cp2 && !isspace((unsigned char)*cp2); ++cp2)
-				;
-			abuf[sizeof(abuf) - 1] = *cp2 = '\0';
-			strncpy(abuf, cp1, sizeof(abuf) - 1);
-			fclose(fp);
-			return (abuf);
-		}
-	}
-	fclose(fp);
-	return (NULL);
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef res_query
-__weak_reference(__res_query, res_query);
-#undef res_search
-__weak_reference(__res_search, res_search);
-#undef res_querydomain
-__weak_reference(__res_querydomain, res_querydomain);
diff --git a/newlib/libc/sys/linux/net/res_send.c b/newlib/libc/sys/linux/net/res_send.c
deleted file mode 100644
index 153d2f5d9..000000000
--- a/newlib/libc/sys/linux/net/res_send.c
+++ /dev/null
@@ -1,954 +0,0 @@
-/*
- * Copyright (c) 1985, 1989, 1993
- *    The Regents of the University of California.  All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- * 	This product includes software developed by the University of
- * 	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Portions Copyright (c) 1993 by Digital Equipment Corporation.
- * 
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies, and that
- * the name of Digital Equipment Corporation not be used in advertising or
- * publicity pertaining to distribution of the document or software without
- * specific, written prior permission.
- * 
- * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
- * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
- * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Portions Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)res_send.c	8.1 (Berkeley) 6/4/93";
-static char orig_rcsid[] = "From: Id: res_send.c,v 8.20 1998/04/06 23:27:51 halley Exp $";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-/*
- * Send query to name server and wait for reply.
- */
-
-#include <sys/types.h>
-#include <sys/event.h>
-#include <sys/poll.h>
-#include <sys/param.h>
-#include <sys/time.h>
-#include <sys/socket.h>
-#include <sys/uio.h>
-
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-
-#include <errno.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "res_config.h"
-
-static int s = -1;		/* socket used for communications */
-static int connected = 0;	/* is the socket connected */
-static int vc = 0;		/* is the socket a virtual circuit? */
-static int af = 0;		/* address family of socket */
-static res_send_qhook Qhook = NULL;
-static res_send_rhook Rhook = NULL;
-
-
-#define CAN_RECONNECT 1
-
-#ifndef DEBUG
-#   define Dprint(cond, args) /*empty*/
-#   define DprintQ(cond, args, query, size) /*empty*/
-#   define Aerror(file, string, error, address) /*empty*/
-#   define Perror(file, string, error) /*empty*/
-#else
-#   define Dprint(cond, args) if (cond) {fprintf args;} else {}
-#   define DprintQ(cond, args, query, size) if (cond) {\
-			fprintf args;\
-			__fp_nquery(query, size, stdout);\
-		} else {}
-static char abuf[NI_MAXHOST];
-static char pbuf[NI_MAXSERV];
-static void Aerror(FILE *, char *, int, struct sockaddr *);
-static void Perror(FILE *, char *, int);
-
-    static void
-    Aerror(file, string, error, address)
-	FILE *file;
-	char *string;
-	int error;
-	struct sockaddr *address;
-    {
-	int save = errno;
-
-	if (_res.options & RES_DEBUG) {
-		if (getnameinfo(address, 0, abuf, sizeof(abuf),
-		    pbuf, sizeof(pbuf),
-		    NI_NUMERICHOST|NI_NUMERICSERV|NI_WITHSCOPEID) != 0) {
-			strncpy(abuf, "?", sizeof(abuf));
-			strncpy(pbuf, "?", sizeof(pbuf));
-		}
-		fprintf(file, "res_send: %s ([%s].%s): %s\n",
-			string, abuf, pbuf, strerror(error));
-	}
-	errno = save;
-    }
-    static void
-    Perror(file, string, error)
-	FILE *file;
-	char *string;
-	int error;
-    {
-	int save = errno;
-
-	if (_res.options & RES_DEBUG) {
-		fprintf(file, "res_send: %s: %s\n",
-			string, strerror(error));
-	}
-	errno = save;
-    }
-#endif
-
-void
-res_send_setqhook(hook)
-	res_send_qhook hook;
-{
-
-	Qhook = hook;
-}
-
-void
-res_send_setrhook(hook)
-	res_send_rhook hook;
-{
-
-	Rhook = hook;
-}
-
-static struct sockaddr * get_nsaddr(size_t);
-
-/*
- * pick appropriate nsaddr_list for use.  see res_init() for initialization.
- */
-static struct sockaddr *
-get_nsaddr(n)
-	size_t n;
-{
-
-	if (!_res.nsaddr_list[n].sin_family) {
-		/*
-		 * - _res_ext.nsaddr_list[n] holds an address that is larger
-		 *   than struct sockaddr, and
-		 * - user code did not update _res.nsaddr_list[n].
-		 */
-		return (struct sockaddr *)&_res_ext.nsaddr_list[n];
-	} else {
-		/*
-		 * - user code updated _res.nsaddr_list[n], or
-		 * - _res.nsaddr_list[n] has the same content as
-		 *   _res_ext.nsaddr_list[n].
-		 */
-		return (struct sockaddr *)&_res.nsaddr_list[n];
-	}
-}
-
-/* int
- * res_isourserver(ina)
- *	looks up "ina" in _res.ns_addr_list[]
- * returns:
- *	0  : not found
- *	>0 : found
- * author:
- *	paul vixie, 29may94
- */
-int
-res_isourserver(inp)
-	const struct sockaddr_in *inp;
-{
-	const struct sockaddr_in6 *in6p = (const struct sockaddr_in6 *)inp;
-	const struct sockaddr_in6 *srv6;
-	const struct sockaddr_in *srv;
-	int ns, ret;
-
-	ret = 0;
-	switch (inp->sin_family) {
-	case AF_INET6:
-		for (ns = 0; ns < _res.nscount; ns++) {
-			srv6 = (struct sockaddr_in6 *)get_nsaddr(ns);
-			if (srv6->sin6_family == in6p->sin6_family &&
-			    srv6->sin6_port == in6p->sin6_port &&
-			    srv6->sin6_scope_id == in6p->sin6_scope_id &&
-			    (IN6_IS_ADDR_UNSPECIFIED(&srv6->sin6_addr) ||
-			     IN6_ARE_ADDR_EQUAL(&srv6->sin6_addr,
-			         &in6p->sin6_addr))) {
-				ret++;
-				break;
-			}
-		}
-		break;
-	case AF_INET:
-		for (ns = 0; ns < _res.nscount; ns++) {
-			srv = (struct sockaddr_in *)get_nsaddr(ns);
-			if (srv->sin_family == inp->sin_family &&
-			    srv->sin_port == inp->sin_port &&
-			    (srv->sin_addr.s_addr == INADDR_ANY ||
-			     srv->sin_addr.s_addr == inp->sin_addr.s_addr)) {
-				ret++;
-				break;
-			}
-		}
-		break;
-	}
-	return (ret);
-}
-
-/* int
- * res_nameinquery(name, type, class, buf, eom)
- *	look for (name,type,class) in the query section of packet (buf,eom)
- * requires:
- *	buf + HFIXEDSZ <= eom
- * returns:
- *	-1 : format error
- *	0  : not found
- *	>0 : found
- * author:
- *	paul vixie, 29may94
- */
-int
-res_nameinquery(name, type, class, buf, eom)
-	const char *name;
-	int type, class;
-	const u_char *buf, *eom;
-{
-	const u_char *cp = buf + HFIXEDSZ;
-	int qdcount = ntohs(((HEADER*)buf)->qdcount);
-
-	while (qdcount-- > 0) {
-		char tname[MAXDNAME+1];
-		int n, ttype, tclass;
-
-		n = dn_expand(buf, eom, cp, tname, sizeof tname);
-		if (n < 0)
-			return (-1);
-		cp += n;
-		if (cp + 2 * INT16SZ > eom)
-			return (-1);
-		ttype = ns_get16(cp); cp += INT16SZ;
-		tclass = ns_get16(cp); cp += INT16SZ;
-		if (ttype == type &&
-		    tclass == class &&
-		    strcasecmp(tname, name) == 0)
-			return (1);
-	}
-	return (0);
-}
-
-/* int
- * res_queriesmatch(buf1, eom1, buf2, eom2)
- *	is there a 1:1 mapping of (name,type,class)
- *	in (buf1,eom1) and (buf2,eom2)?
- * returns:
- *	-1 : format error
- *	0  : not a 1:1 mapping
- *	>0 : is a 1:1 mapping
- * author:
- *	paul vixie, 29may94
- */
-int
-res_queriesmatch(buf1, eom1, buf2, eom2)
-	const u_char *buf1, *eom1;
-	const u_char *buf2, *eom2;
-{
-	const u_char *cp = buf1 + HFIXEDSZ;
-	int qdcount = ntohs(((HEADER*)buf1)->qdcount);
-
-	if (buf1 + HFIXEDSZ > eom1 || buf2 + HFIXEDSZ > eom2)
-		return (-1);
-
-	/*
-	 * Only header section present in replies to
-	 * dynamic update packets.
-	 */
-	if ( (((HEADER *)buf1)->opcode == ns_o_update) &&
-	     (((HEADER *)buf2)->opcode == ns_o_update) )
-		return (1);
-
-	if (qdcount != ntohs(((HEADER*)buf2)->qdcount))
-		return (0);
-	while (qdcount-- > 0) {
-		char tname[MAXDNAME+1];
-		int n, ttype, tclass;
-
-		n = dn_expand(buf1, eom1, cp, tname, sizeof tname);
-		if (n < 0)
-			return (-1);
-		cp += n;
-		if (cp + 2 * INT16SZ > eom1)
-			return (-1);
-		ttype = ns_get16(cp);	cp += INT16SZ;
-		tclass = ns_get16(cp); cp += INT16SZ;
-		if (!res_nameinquery(tname, ttype, tclass, buf2, eom2))
-			return (0);
-	}
-	return (1);
-}
-
-int
-res_send(buf, buflen, ans, anssiz)
-	const u_char *buf;
-	int buflen;
-	u_char *ans;
-	int anssiz;
-{
-	HEADER *hp = (HEADER *) buf;
-	HEADER *anhp = (HEADER *) ans;
-	int gotsomewhere, connreset, terrno, try, v_circuit, resplen, ns, n;
-	int kq;
-	u_int badns;	/* XXX NSMAX can't exceed #/bits in this variable */
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		/* errno should have been set by res_init() in this case. */
-		return (-1);
-	}
-	if (anssiz < HFIXEDSZ) {
-		errno = EINVAL;
-		return (-1);
-	}
-	DprintQ((_res.options & RES_DEBUG) || (_res.pfcode & RES_PRF_QUERY),
-		(stdout, ";; res_send()\n"), buf, buflen);
-	v_circuit = (_res.options & RES_USEVC) || buflen > PACKETSZ;
-	gotsomewhere = 0;
-	connreset = 0;
-	terrno = ETIMEDOUT;
-	badns = 0;
-
-	/*
-	 * Send request, RETRY times, or until successful
-	 */
-	for (try = 0; try < _res.retry; try++) {
-	    for (ns = 0; ns < _res.nscount; ns++) {
-		struct sockaddr *nsap = get_nsaddr(ns);
-		socklen_t salen;
-
-		if (nsap->sa_family == AF_INET6)
-			salen = sizeof(struct sockaddr_in6);
-		else if (nsap->sa_family == AF_INET)
-			salen = sizeof(struct sockaddr_in);
-		else
-			salen = 0;	/*unknown, die on connect*/
-
-    same_ns:
-		if (badns & (1 << ns)) {
-			res_close();
-			goto next_ns;
-		}
-
-		if (Qhook) {
-			int done = 0, loops = 0;
-
-			do {
-				res_sendhookact act;
-
-				act = (*Qhook)((struct sockaddr_in **)&nsap,
-					       &buf, &buflen,
-					       ans, anssiz, &resplen);
-				switch (act) {
-				case res_goahead:
-					done = 1;
-					break;
-				case res_nextns:
-					res_close();
-					goto next_ns;
-				case res_done:
-					close(kq);
-					return (resplen);
-				case res_modified:
-					/* give the hook another try */
-					if (++loops < 42) /*doug adams*/
-						break;
-					/*FALLTHROUGH*/
-				case res_error:
-					/*FALLTHROUGH*/
-				default:
-					close(kq);
-					return (-1);
-				}
-			} while (!done);
-		}
-
-		Dprint((_res.options & RES_DEBUG) &&
-		       getnameinfo(nsap, salen, abuf, sizeof(abuf),
-			   NULL, 0, NI_NUMERICHOST | NI_WITHSCOPEID) == 0,
-		       (stdout, ";; Querying server (# %d) address = %s\n",
-			ns + 1, abuf));
-
-		if (v_circuit) {
-			int truncated;
-			u_short len;
-			u_char *cp;
-			ssize_t rc;
-
-			/*
-			 * Use virtual circuit;
-			 * at most one attempt per server.
-			 */
-			try = _res.retry;
-			truncated = 0;
-			if (s < 0 || !vc || hp->opcode == ns_o_update ||
-			    af != nsap->sa_family) {
-				if (s >= 0)
-					res_close();
-
-				af = nsap->sa_family;
-				s = socket(af, SOCK_STREAM, 0);
-				if (s < 0) {
-					terrno = errno;
-					Perror(stderr, "socket(vc)", errno);
-					badns |= (1 << ns);
-					res_close();
-					goto next_ns;
-				}
-				errno = 0;
-				if (connect(s, nsap, salen) < 0) {
-					terrno = errno;
-					Aerror(stderr, "connect/vc",
-					       errno, nsap);
-					badns |= (1 << ns);
-					res_close();
-					goto next_ns;
-				}
-				vc = 1;
-			}
-			/*
-			 * Send length & message
-			 */
-			putshort((u_short)buflen, (u_char*)&len);
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-			{
-			struct iovec iov[2];
-			iov[0].iov_base = (caddr_t)&len;
-			iov[0].iov_len = INT16SZ;
-			iov[1].iov_base = (caddr_t)buf;
-			iov[1].iov_len = buflen;
-			rc = writev(s, iov, 2);
-			}
-#else /* EL/IX level 1 */
-			{
-			char *tmpbuf;
-			tmpbuf = malloc (INT16SZ + buflen);
-			memcpy (tmpbuf, &len, INT16SZ);
-			memcpy (tmpbuf + INT16SZ, buf, buflen);
-			rc = write (s, tmpbuf, INT16SZ + buflen);
-			}
-#endif /* EL/IX level 1 */
-			if (rc != (INT16SZ + buflen)) {
-				terrno = errno;
-				Perror(stderr, "write failed", errno);
-				badns |= (1 << ns);
-				res_close();
-				goto next_ns;
-			}
-			/*
-			 * Receive length & response
-			 */
- read_len:
-			cp = ans;
-			len = INT16SZ;
-			while ((n = read(s, (char *)cp, (int)len)) > 0) {
-				cp += n;
-				if ((len -= n) <= 0)
-					break;
-			}
-			if (n <= 0) {
-				terrno = errno;
-				Perror(stderr, "read failed", errno);
-				res_close();
-				/*
-				 * A long running process might get its TCP
-				 * connection reset if the remote server was
-				 * restarted.  Requery the server instead of
-				 * trying a new one.  When there is only one
-				 * server, this means that a query might work
-				 * instead of failing.  We only allow one reset
-				 * per query to prevent looping.
-				 */
-				if (terrno == ECONNRESET && !connreset) {
-					connreset = 1;
-					res_close();
-					goto same_ns;
-				}
-				res_close();
-				goto next_ns;
-			}
-			resplen = ns_get16(ans);
-			if (resplen > anssiz) {
-				Dprint(_res.options & RES_DEBUG,
-				       (stdout, ";; response truncated\n")
-				       );
-				truncated = 1;
-				len = anssiz;
-			} else
-				len = resplen;
-			if (len < HFIXEDSZ) {
-				/*
-				 * Undersized message.
-				 */
-				Dprint(_res.options & RES_DEBUG,
-				       (stdout, ";; undersized: %d\n", len));
-				terrno = EMSGSIZE;
-				badns |= (1 << ns);
-				res_close();
-				goto next_ns;
-			}
-			cp = ans;
-			while (len != 0 &&
-			       (n = read(s, (char *)cp, (int)len)) > 0) {
-				cp += n;
-				len -= n;
-			}
-			if (n <= 0) {
-				terrno = errno;
-				Perror(stderr, "read(vc)", errno);
-				res_close();
-				goto next_ns;
-			}
-			if (truncated) {
-				/*
-				 * Flush rest of answer
-				 * so connection stays in synch.
-				 */
-				anhp->tc = 1;
-				len = resplen - anssiz;
-				while (len != 0) {
-					char junk[PACKETSZ];
-
-					n = (len > sizeof(junk)
-					     ? sizeof(junk)
-					     : len);
-					if ((n = read(s, junk, n)) > 0)
-						len -= n;
-					else
-						break;
-				}
-			}
-			/*
-			 * The calling applicating has bailed out of
-			 * a previous call and failed to arrange to have
-			 * the circuit closed or the server has got
-			 * itself confused. Anyway drop the packet and
-			 * wait for the correct one.
-			 */
-			if (hp->id != anhp->id) {
-				DprintQ((_res.options & RES_DEBUG) ||
-					(_res.pfcode & RES_PRF_REPLY),
-					(stdout, ";; old answer (unexpected):\n"),
-					ans, (resplen>anssiz)?anssiz:resplen);
-				goto read_len;
-			}
-		} else {
-			/*
-			 * Use datagrams.
-			 */
-			struct pollfd pfd[1];
-			int ptimeout;
-			struct timespec ts;
-			struct timeval timeout, ctv;
-			struct sockaddr_storage from;
-			int fromlen;
-
-			if (s < 0 || vc || af != nsap->sa_family) {
-				if (vc)
-					res_close();
-				af = nsap->sa_family;
-				s = socket(af, SOCK_DGRAM, 0);
-				if (s < 0) {
-#ifndef CAN_RECONNECT
- bad_dg_sock:
-#endif
-					terrno = errno;
-					Perror(stderr, "socket(dg)", errno);
-					badns |= (1 << ns);
-					res_close();
-					goto next_ns;
-				}
-				connected = 0;
-			}
-#ifndef CANNOT_CONNECT_DGRAM
-			/*
-			 * On a 4.3BSD+ machine (client and server,
-			 * actually), sending to a nameserver datagram
-			 * port with no nameserver will cause an
-			 * ICMP port unreachable message to be returned.
-			 * If our datagram socket is "connected" to the
-			 * server, we get an ECONNREFUSED error on the next
-			 * socket operation, and select returns if the
-			 * error message is received.  We can thus detect
-			 * the absence of a nameserver without timing out.
-			 * If we have sent queries to at least two servers,
-			 * however, we don't want to remain connected,
-			 * as we wish to receive answers from the first
-			 * server to respond.
-			 *
-			 * When the option "insecure1" is specified, we'd
-			 * rather expect to see responses from an "unknown"
-			 * address.  In order to let the kernel accept such
-			 * responses, do not connect the socket here.
-			 * XXX: or do we need an explicit option to disable
-			 * connecting?
-			 */
-			if (!(_res.options & RES_INSECURE1) &&
-			    (_res.nscount == 1 || (try == 0 && ns == 0))) {
-				/*
-				 * Connect only if we are sure we won't
-				 * receive a response from another server.
-				 */
-				if (!connected) {
-					if (connect(s, nsap, salen) < 0) {
-						Aerror(stderr,
-						       "connect(dg)",
-						       errno, nsap);
-						badns |= (1 << ns);
-						res_close();
-						goto next_ns;
-					}
-					connected = 1;
-				}
-
-				if (send(s, (char*)buf, buflen, 0) != buflen) {
-					Perror(stderr, "send", errno);
-					badns |= (1 << ns);
-					res_close();
-					goto next_ns;
-				}
-			} else {
-				/*
-				 * Disconnect if we want to listen
-				 * for responses from more than one server.
-				 */
-				if (connected) {
-#ifdef CAN_RECONNECT
-					/* XXX: any errornous address */
-					struct sockaddr_in no_addr;
-
-					no_addr.sin_family = AF_INET;
-					no_addr.sin_addr.s_addr = INADDR_ANY;
-					no_addr.sin_port = 0;
-					(void) connect(s,
-						       (struct sockaddr *)
-						        &no_addr,
-						       sizeof no_addr);
-#else
-					int s1 = socket(af, SOCK_DGRAM,0);
-					if (s1 < 0)
-						goto bad_dg_sock;
-					(void)_dup2(s1, s);
-					(void)close(s1);
-					Dprint(_res.options & RES_DEBUG,
-						(stdout, ";; new DG socket\n"))
-#endif /* CAN_RECONNECT */
-					connected = 0;
-					errno = 0;
-				}
-#endif /* !CANNOT_CONNECT_DGRAM */
-				if (sendto(s, (char*)buf, buflen, 0,
-					   nsap, salen) != buflen) {
-					Aerror(stderr, "sendto", errno, nsap);
-					badns |= (1 << ns);
-					res_close();
-					goto next_ns;
-				}
-#ifndef CANNOT_CONNECT_DGRAM
-			}
-#endif /* !CANNOT_CONNECT_DGRAM */
-
-			/*
-			 * Wait for reply
-			 */
-
-			timeout.tv_sec = (_res.retrans << try);
-			if (try > 0)
-				timeout.tv_sec /= _res.nscount;
-			if ((long) timeout.tv_sec <= 0)
-				timeout.tv_sec = 1;
-			timeout.tv_usec = 0;
-			TIMEVAL_TO_TIMESPEC(&timeout, &ts);
-			(void) gettimeofday(&ctv, NULL);
-			timeradd(&timeout, &ctv, &timeout);
-
-		       /* Convert struct timespec in milliseconds.  */
-		       ptimeout = timeout.tv_sec * 1000 + timeout.tv_usec / 1000;
-    wait:
-		       pfd[0].fd = s;
-		       pfd[0].events = POLLIN;
-		       n = poll (pfd, 1, ptimeout);
-
-			if (s < 0) {
-				Perror(stderr, "s out-of-bounds", EMFILE);
-				res_close();
-				goto next_ns;
-			}
-
-			if (n < 0) {
-				if (errno == EINTR) {
-					(void) gettimeofday(&ctv, NULL);
-					if (timercmp(&ctv, &timeout, <)) {
-						timersub(&timeout, &ctv, &ctv);
-						TIMEVAL_TO_TIMESPEC(&ctv, &ts);
-						goto wait;
-					}
-				}
-				Perror(stderr, "poll", errno);
-				res_close();
-				goto next_ns;
-			}
-
-			if (n == 0) {
-				/*
-				 * timeout
-				 */
-				Dprint(_res.options & RES_DEBUG,
-				       (stdout, ";; timeout\n"));
-				gotsomewhere = 1;
-				res_close();
-				goto next_ns;
-			}
-			errno = 0;
-			fromlen = sizeof(from);
-			resplen = recvfrom(s, (char*)ans, anssiz, 0,
-					   (struct sockaddr *)&from, &fromlen);
-			if (resplen <= 0) {
-				Perror(stderr, "recvfrom", errno);
-				res_close();
-				goto next_ns;
-			}
-			gotsomewhere = 1;
-			if (resplen < HFIXEDSZ) {
-				/*
-				 * Undersized message.
-				 */
-				Dprint(_res.options & RES_DEBUG,
-				       (stdout, ";; undersized: %d\n",
-					resplen));
-				terrno = EMSGSIZE;
-				badns |= (1 << ns);
-				res_close();
-				goto next_ns;
-			}
-			if (hp->id != anhp->id) {
-				/*
-				 * response from old query, ignore it.
-				 * XXX - potential security hazard could
-				 *	 be detected here.
-				 */
-				DprintQ((_res.options & RES_DEBUG) ||
-					(_res.pfcode & RES_PRF_REPLY),
-					(stdout, ";; old answer:\n"),
-					ans, (resplen>anssiz)?anssiz:resplen);
-				goto wait;
-			}
-#ifdef CHECK_SRVR_ADDR
-			if (!(_res.options & RES_INSECURE1) &&
-			    !res_isourserver((struct sockaddr_in *)&from)) {
-				/*
-				 * response from wrong server? ignore it.
-				 * XXX - potential security hazard could
-				 *	 be detected here.
-				 */
-				DprintQ((_res.options & RES_DEBUG) ||
-					(_res.pfcode & RES_PRF_REPLY),
-					(stdout, ";; not our server:\n"),
-					ans, (resplen>anssiz)?anssiz:resplen);
-				goto wait;
-			}
-#endif
-			if (!(_res.options & RES_INSECURE2) &&
-			    !res_queriesmatch(buf, buf + buflen,
-					      ans, ans + anssiz)) {
-				/*
-				 * response contains wrong query? ignore it.
-				 * XXX - potential security hazard could
-				 *	 be detected here.
-				 */
-				DprintQ((_res.options & RES_DEBUG) ||
-					(_res.pfcode & RES_PRF_REPLY),
-					(stdout, ";; wrong query name:\n"),
-					ans, (resplen>anssiz)?anssiz:resplen);
-				goto wait;
-			}
-			if (anhp->rcode == SERVFAIL ||
-			    anhp->rcode == NOTIMP ||
-			    anhp->rcode == REFUSED) {
-				DprintQ(_res.options & RES_DEBUG,
-					(stdout, "server rejected query:\n"),
-					ans, (resplen>anssiz)?anssiz:resplen);
-				badns |= (1 << ns);
-				res_close();
-				/* don't retry if called from dig */
-				if (!_res.pfcode)
-					goto next_ns;
-			}
-			if (!(_res.options & RES_IGNTC) && anhp->tc) {
-				/*
-				 * get rest of answer;
-				 * use TCP with same server.
-				 */
-				Dprint(_res.options & RES_DEBUG,
-				       (stdout, ";; truncated answer\n"));
-				v_circuit = 1;
-				res_close();
-				goto same_ns;
-			}
-		} /*if vc/dg*/
-		Dprint((_res.options & RES_DEBUG) ||
-		       ((_res.pfcode & RES_PRF_REPLY) &&
-			(_res.pfcode & RES_PRF_HEAD1)),
-		       (stdout, ";; got answer:\n"));
-#if 0
-		DprintQ((_res.options & RES_DEBUG) ||
-			(_res.pfcode & RES_PRF_REPLY),
-			(stdout, ""),
-			ans, (resplen>anssiz)?anssiz:resplen);
-#endif
-		/*
-		 * If using virtual circuits, we assume that the first server
-		 * is preferred over the rest (i.e. it is on the local
-		 * machine) and only keep that one open.
-		 * If we have temporarily opened a virtual circuit,
-		 * or if we haven't been asked to keep a socket open,
-		 * close the socket.
-		 */
-		if ((v_circuit && (!(_res.options & RES_USEVC) || ns != 0)) ||
-		    !(_res.options & RES_STAYOPEN)) {
-			res_close();
-		}
-		if (Rhook) {
-			int done = 0, loops = 0;
-
-			do {
-				res_sendhookact act;
-
-				act = (*Rhook)((struct sockaddr_in *)nsap,
-					       buf, buflen,
-					       ans, anssiz, &resplen);
-				switch (act) {
-				case res_goahead:
-				case res_done:
-					done = 1;
-					break;
-				case res_nextns:
-					res_close();
-					goto next_ns;
-				case res_modified:
-					/* give the hook another try */
-					if (++loops < 42) /*doug adams*/
-						break;
-					/*FALLTHROUGH*/
-				case res_error:
-					/*FALLTHROUGH*/
-				default:
-					close(kq);
-					return (-1);
-				}
-			} while (!done);
-
-		}
-		close(kq);
-		return (resplen);
-    next_ns: ;
-	   } /*foreach ns*/
-	} /*foreach retry*/
-	res_close();
-	close(kq);
-	if (!v_circuit) {
-		if (!gotsomewhere)
-			errno = ECONNREFUSED;	/* no nameservers found */
-		else
-			errno = ETIMEDOUT;	/* no answer obtained */
-	} else
-		errno = terrno;
-	return (-1);
-}
-
-/*
- * This routine is for closing the socket if a virtual circuit is used and
- * the program wants to close it.  This provides support for endhostent()
- * which expects to close the socket.
- *
- * This routine is not expected to be user visible.
- */
-void
-res_close()
-{
-	if (s >= 0) {
-		(void)close(s);
-		s = -1;
-		connected = 0;
-		vc = 0;
-		af = 0;
-	}
-}
-
-/*
- * Weak aliases for applications that use certain private entry points,
- * and fail to include <resolv.h>.
- */
-#undef res_close
-__weak_reference(__res_close, _res_close);
-#undef res_send
-__weak_reference(__res_send, res_send);
diff --git a/newlib/libc/sys/linux/net/res_update.c b/newlib/libc/sys/linux/net/res_update.c
deleted file mode 100644
index b427bf819..000000000
--- a/newlib/libc/sys/linux/net/res_update.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * Copyright (c) 1996 by Internet Software Consortium.
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS
- * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE
- * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
- * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
- * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
- * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- */
-
-/*
- * Based on the Dynamic DNS reference implementation by Viraj Bais
- * <viraj_bais@ccm.fm.intel.com>
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <machine/endian.h>
-
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <arpa/nameser.h>
-#include <limits.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*
- * Separate a linked list of records into groups so that all records
- * in a group will belong to a single zone on the nameserver.
- * Create a dynamic update packet for each zone and send it to the
- * nameservers for that zone, and await answer.
- * Abort if error occurs in updating any zone.
- * Return the number of zones updated on success, < 0 on error.
- *
- * On error, caller must deal with the unsynchronized zones
- * eg. an A record might have been successfully added to the forward
- * zone but the corresponding PTR record would be missing if error
- * was encountered while updating the reverse zone.
- */
-
-#define NSMAX 16
-
-struct ns1 {
-	char nsname[MAXDNAME];
-	struct in_addr nsaddr1;
-};
-
-struct zonegrp {
-	char 		z_origin[MAXDNAME];
-	int16_t		z_class;
-	char		z_soardata[MAXDNAME + 5 * INT32SZ];
-	struct ns1 	z_ns[NSMAX];
-	int		z_nscount;
-	ns_updrec *	z_rr;
-	struct zonegrp *z_next;
-};
-
-
-int
-res_update(ns_updrec *rrecp_in) {
-	ns_updrec *rrecp, *tmprrecp;
-	u_char buf[PACKETSZ], answer[PACKETSZ], packet[2*PACKETSZ];
-	char name[MAXDNAME], zname[MAXDNAME], primary[MAXDNAME],
-	     mailaddr[MAXDNAME];
-	u_char soardata[2*MAXCDNAME+5*INT32SZ];
-	char *dname, *svdname, *cp1, *target;
-	u_char *cp, *eom;
-	HEADER *hp = (HEADER *) answer;
-	struct zonegrp *zptr = NULL, *tmpzptr, *prevzptr, *zgrp_start = NULL;
-	int i, j, k = 0, n, ancount, nscount, arcount, rcode, rdatasize,
-	    newgroup, done, myzone, seen_before, numzones = 0;
-	u_int16_t dlen, class, qclass, type, qtype;
-	u_int32_t ttl;
-
-	if ((_res.options & RES_INIT) == 0 && res_init() == -1) {
-		h_errno = NETDB_INTERNAL;
-		return (-1);
-	}
-
-	for (rrecp = rrecp_in; rrecp; rrecp = rrecp->r_next) {
-		dname = rrecp->r_dname;
-		n = strlen(dname);
-		if (dname[n-1] == '.')
-			dname[n-1] = '\0';
-		qtype = T_SOA;
-		qclass = rrecp->r_class;
-		done = 0;
-		seen_before = 0;
-
-		while (!done && dname) {
-		    if (qtype == T_SOA) {
-			for (tmpzptr = zgrp_start;
-			     tmpzptr && !seen_before;
-			     tmpzptr = tmpzptr->z_next) {
-				if (strcasecmp(dname,
-					       tmpzptr->z_origin) == 0 &&
-				    tmpzptr->z_class == qclass)
-					seen_before++;
-				for (tmprrecp = tmpzptr->z_rr;
-				     tmprrecp && !seen_before;
-				     tmprrecp = tmprrecp->r_grpnext)
-				if (strcasecmp(dname, tmprrecp->r_dname) == 0
-				    && tmprrecp->r_class == qclass) {
-					seen_before++;
-					break;
-				}
-				if (seen_before) {
-					/*
-					 * Append to the end of
-					 * current group.
-					 */
-					for (tmprrecp = tmpzptr->z_rr;
-					     tmprrecp->r_grpnext;
-					     tmprrecp = tmprrecp->r_grpnext)
-						(void)NULL;
-					tmprrecp->r_grpnext = rrecp;
-					rrecp->r_grpnext = NULL;
-					done = 1;
-					break;
-				}
-			}
-		} else if (qtype == T_A) {
-		    for (tmpzptr = zgrp_start;
-			 tmpzptr && !done;
-			 tmpzptr = tmpzptr->z_next)
-			    for (i = 0; i < tmpzptr->z_nscount; i++)
-				if (tmpzptr->z_class == qclass &&
-				    strcasecmp(tmpzptr->z_ns[i].nsname,
-					       dname) == 0 &&
-				    tmpzptr->z_ns[i].nsaddr1.s_addr != 0) {
-					zptr->z_ns[k].nsaddr1.s_addr =
-					 tmpzptr->z_ns[i].nsaddr1.s_addr;
-					done = 1;
-					break;
-				}
-		}
-		if (done)
-		    break;
-		n = res_mkquery(QUERY, dname, qclass, qtype, NULL,
-				0, NULL, buf, sizeof buf);
-		if (n <= 0) {
-		    fprintf(stderr, "res_update: mkquery failed\n");
-		    return (n);
-		}
-		n = res_send(buf, n, answer, sizeof answer);
-		if (n < 0) {
-		    fprintf(stderr, "res_update: send error for %s\n",
-			    rrecp->r_dname);
-		    return (n);
-		}
-		if (n < HFIXEDSZ)
-			return (-1);
-		ancount = ntohs(hp->ancount);
-		nscount = ntohs(hp->nscount);
-		arcount = ntohs(hp->arcount);
-		rcode = hp->rcode;
-		cp = answer + HFIXEDSZ;
-		eom = answer + n;
-		/* skip the question section */
-		n = dn_skipname(cp, eom);
-		if (n < 0 || cp + n + 2 * INT16SZ > eom)
-			return (-1);
-		cp += n + 2 * INT16SZ;
-
-		if (qtype == T_SOA) {
-		    if (ancount == 0 && nscount == 0 && arcount == 0) {
-			/*
-			 * if (rcode == NOERROR) then the dname exists but
-			 * has no soa record associated with it.
-			 * if (rcode == NXDOMAIN) then the dname does not
-			 * exist and the server is replying out of NCACHE.
-			 * in either case, proceed with the next try
-			 */
-			dname = strchr(dname, '.');
-			if (dname != NULL)
-				dname++;
-			continue;
-		    } else if ((rcode == NOERROR || rcode == NXDOMAIN) &&
-			       ancount == 0 &&
-			       nscount == 1 && arcount == 0) {
-			/*
-			 * name/data does not exist, soa record supplied in the
-			 * authority section
-			 */
-			/* authority section must contain the soa record */
-			if ((n = dn_expand(answer, eom, cp, zname,
-					sizeof zname)) < 0)
-			    return (n);
-			cp += n;
-			if (cp + 2 * INT16SZ > eom)
-				return (-1);
-			GETSHORT(type, cp);
-			GETSHORT(class, cp);
-			if (type != T_SOA || class != qclass) {
-			    fprintf(stderr, "unknown answer\n");
-			    return (-1);
-			}
-			myzone = 0;
-			svdname = dname;
-			while (dname)
-			    if (strcasecmp(dname, zname) == 0) {
-				myzone = 1;
-				break;
-			    } else if ((dname = strchr(dname, '.')) != NULL)
-				dname++;
-			if (!myzone) {
-			    dname = strchr(svdname, '.');
-			    if (dname != NULL)
-				dname++;
-			    continue;
-			}
-			nscount = 0;
-			/* fallthrough */
-		    } else if (rcode == NOERROR && ancount == 1) {
-			/*
-			 * found the zone name
-			 * new servers will supply NS records for the zone
-			 * in authority section and A records for those 
-			 * nameservers in the additional section
-			 * older servers have to be explicitly queried for
-			 * NS records for the zone
-			 */
-			/* answer section must contain the soa record */
-			if ((n = dn_expand(answer, eom, cp, zname,
-			 	       	   sizeof zname)) < 0)
-				return (n);
-			else
-				cp += n;
-			if (cp + 2 * INT16SZ > eom)
-				return (-1);
-			GETSHORT(type, cp);
-			GETSHORT(class, cp);
-			if (type == T_CNAME) {
-				dname = strchr(dname, '.');
-				if (dname != NULL)
-					dname++;
-				continue;
-			}
-			if (strcasecmp(dname, zname) != 0 ||
-			    type != T_SOA ||
-			    class != rrecp->r_class) {
-				fprintf(stderr, "unknown answer\n");
-				return (-1);
-			}
-			/* FALLTHROUGH */
-		    } else {
-			fprintf(stderr,
-		"unknown response: ans=%d, auth=%d, add=%d, rcode=%d\n",
-				ancount, nscount, arcount, hp->rcode);
-			return (-1);
-		    }
-		    if (cp + INT32SZ + INT16SZ > eom)
-			    return (-1);
-		    /* continue processing the soa record */
-		    GETLONG(ttl, cp);
-		    GETSHORT(dlen, cp);
-		    if (cp + dlen > eom)
-			    return (-1);
-		    newgroup = 1;
-		    zptr = zgrp_start;
-		    prevzptr = NULL;
-		    while (zptr) {
-			if (strcasecmp(zname, zptr->z_origin) == 0 &&
-			    type == T_SOA && class == qclass) {
-				newgroup = 0;
-				break;
-			}
-			prevzptr = zptr;
-			zptr = zptr->z_next;
-		    }
-		    if (!newgroup) {
-			for (tmprrecp = zptr->z_rr;
-			     tmprrecp->r_grpnext;
-			     tmprrecp = tmprrecp->r_grpnext)
-				    ;
-			tmprrecp->r_grpnext = rrecp;
-			rrecp->r_grpnext = NULL;
-			done = 1;
-			cp += dlen;
-			break;
-		    } else {
-			if ((n = dn_expand(answer, eom, cp, primary,
-				       	   sizeof primary)) < 0)
-			    return (n);
-			cp += n;
-			/* 
-			 * We don't have to bounds check here because the
-			 * next use of 'cp' is in dn_expand().
-			 */
-			cp1 = (char *)soardata;
-			strcpy(cp1, primary);
-			cp1 += strlen(cp1) + 1;
-			if ((n = dn_expand(answer, eom, cp, mailaddr,
-				       	   sizeof mailaddr)) < 0)
-			    return (n);
-			cp += n;
-			strcpy(cp1, mailaddr);
-			cp1 += strlen(cp1) + 1;
-			if (cp + 5*INT32SZ > eom)
-				return (-1);
-			memcpy(cp1, cp, 5*INT32SZ);
-			cp += 5*INT32SZ;
-			cp1 += 5*INT32SZ;
-			rdatasize = (u_char *)cp1 - soardata;
-			zptr = calloc(1, sizeof(struct zonegrp));
-			if (zptr == NULL)
-                	    return (-1);
-			if (zgrp_start == NULL)
-			    zgrp_start = zptr;
-			else
-			    prevzptr->z_next = zptr;
-			zptr->z_rr = rrecp;
-			rrecp->r_grpnext = NULL;
-			strcpy(zptr->z_origin, zname);
-			zptr->z_class = class;
-			memcpy(zptr->z_soardata, soardata, rdatasize);
-			/* fallthrough to process NS and A records */
-		    }
-		} else if (qtype == T_NS) {
-		    if (rcode == NOERROR && ancount > 0) {
-			strcpy(zname, dname);
-			for (zptr = zgrp_start; zptr; zptr = zptr->z_next) {
-			    if (strcasecmp(zname, zptr->z_origin) == 0)
-				break;
-			}
-			if (zptr == NULL)
-			    /* should not happen */
-			    return (-1);
-			if (nscount > 0) {
-			    /*
-			     * answer and authority sections contain
-			     * the same information, skip answer section
-			     */
-			    for (j = 0; j < ancount; j++) {
-				n = dn_skipname(cp, eom);
-				if (n < 0)
-					return (-1);
-				n += 2*INT16SZ + INT32SZ;
-				if (cp + n + INT16SZ > eom)
-					return (-1);
-				cp += n;
-				GETSHORT(dlen, cp);
-				cp += dlen;
-			    }
-			} else
-			    nscount = ancount;
-			/* fallthrough to process NS and A records */
-		    } else {
-			fprintf(stderr, "cannot determine nameservers for %s:\
-ans=%d, auth=%d, add=%d, rcode=%d\n",
-				dname, ancount, nscount, arcount, hp->rcode);
-			return (-1);
-		    }
-		} else if (qtype == T_A) {
-		    if (rcode == NOERROR && ancount > 0) {
-			arcount = ancount;
-			ancount = nscount = 0;
-			/* fallthrough to process A records */
-		    } else {
-			fprintf(stderr, "cannot determine address for %s:\
-ans=%d, auth=%d, add=%d, rcode=%d\n",
-				dname, ancount, nscount, arcount, hp->rcode);
-			return (-1);
-		    }
-		}
-		/* process NS records for the zone */
-		j = 0;
-		for (i = 0; i < nscount; i++) {
-		    if ((n = dn_expand(answer, eom, cp, name,
-					sizeof name)) < 0)
-			return (n);
-		    cp += n;
-		    if (cp + 3 * INT16SZ + INT32SZ > eom)
-			    return (-1);
-		    GETSHORT(type, cp);
-		    GETSHORT(class, cp);
-		    GETLONG(ttl, cp);
-		    GETSHORT(dlen, cp);
-		    if (cp + dlen > eom)
-			return (-1);
-		    if (strcasecmp(name, zname) == 0 &&
-			type == T_NS && class == qclass) {
-				if ((n = dn_expand(answer, eom, cp,
-						   name, sizeof name)) < 0)
-					return (n);
-			    target = zptr->z_ns[j++].nsname;
-			    strcpy(target, name);
-		    }
-		    cp += dlen;
-		}
-		if (zptr->z_nscount == 0)
-		    zptr->z_nscount = j;
-		/* get addresses for the nameservers */
-		for (i = 0; i < arcount; i++) {
-		    if ((n = dn_expand(answer, eom, cp, name,
-					sizeof name)) < 0)
-			return (n);
-		    cp += n;
-		    if (cp + 3 * INT16SZ + INT32SZ > eom)
-			return (-1);
-		    GETSHORT(type, cp);
-		    GETSHORT(class, cp);
-		    GETLONG(ttl, cp);
-		    GETSHORT(dlen, cp);
-		    if (cp + dlen > eom)
-			    return (-1);
-		    if (type == T_A && dlen == INT32SZ && class == qclass) {
-			for (j = 0; j < zptr->z_nscount; j++)
-			    if (strcasecmp(name, zptr->z_ns[j].nsname) == 0) {
-				memcpy(&zptr->z_ns[j].nsaddr1.s_addr, cp,
-				       INT32SZ);
-				break;
-			    }
-		    }
-		    cp += dlen;
-		}
-		if (zptr->z_nscount == 0) {
-		    dname = zname;
-		    qtype = T_NS;
-		    continue;
-		}
-		done = 1;
-		for (k = 0; k < zptr->z_nscount; k++)
-		    if (zptr->z_ns[k].nsaddr1.s_addr == 0) {
-			done = 0;
-			dname = zptr->z_ns[k].nsname;
-			qtype = T_A;
-		    }
-
- 	    } /* while */
-	}
-
-	_res.options |= RES_DEBUG;
-	for (zptr = zgrp_start; zptr; zptr = zptr->z_next) {
-
-		/* append zone section */
-		rrecp = res_mkupdrec(ns_s_zn, zptr->z_origin,
-				     zptr->z_class, ns_t_soa, 0);
-		if (rrecp == NULL) {
-			fprintf(stderr, "saverrec error\n");
-			fflush(stderr);
-			return (-1);
-		}
-		rrecp->r_grpnext = zptr->z_rr;
-		zptr->z_rr = rrecp;
-
-		n = res_mkupdate(zptr->z_rr, packet, sizeof packet);
-		if (n < 0) {
-			fprintf(stderr, "res_mkupdate error\n");
-			fflush(stderr);
-			return (-1);
-		} else
-			fprintf(stdout, "res_mkupdate: packet size = %d\n", n);
-
-		/*
-		 * Override the list of NS records from res_init() with
-		 * the authoritative nameservers for the zone being updated.
-		 * Sort primary to be the first in the list of nameservers.
-		 */
-		for (i = 0; i < zptr->z_nscount; i++) {
-			if (strcasecmp(zptr->z_ns[i].nsname,
-				       zptr->z_soardata) == 0) {
-				struct in_addr tmpaddr;
-
-				if (i != 0) {
-					strcpy(zptr->z_ns[i].nsname,
-					       zptr->z_ns[0].nsname);
-					strcpy(zptr->z_ns[0].nsname,
-					       zptr->z_soardata);
-					tmpaddr = zptr->z_ns[i].nsaddr1;
-					zptr->z_ns[i].nsaddr1 =
-						zptr->z_ns[0].nsaddr1;
-					zptr->z_ns[0].nsaddr1 = tmpaddr;
-				}
-				break;
-			}
-		}
-		for (i = 0; i < MAXNS; i++) {
-			_res.nsaddr_list[i].sin_addr = zptr->z_ns[i].nsaddr1;
-			_res.nsaddr_list[i].sin_family = AF_INET;
-			_res.nsaddr_list[i].sin_port = htons(NAMESERVER_PORT);
-		}
-		_res.nscount = (zptr->z_nscount < MAXNS) ? 
-					zptr->z_nscount : MAXNS;
-		n = res_send(packet, n, answer, sizeof(answer));
-		if (n < 0) {
-			fprintf(stderr, "res_send: send error, n=%d\n", n);
-			break;
-		} else
-			numzones++;
-	}
-
-	/* free malloc'ed memory */
-	while(zgrp_start) {
-		zptr = zgrp_start;
-		zgrp_start = zgrp_start->z_next;
-		res_freeupdrec(zptr->z_rr);  /* Zone section we allocated. */
-		free((char *)zptr);
-	}
-
-	return (numzones);
-}
diff --git a/newlib/libc/sys/linux/net/resolver.3 b/newlib/libc/sys/linux/net/resolver.3
deleted file mode 100644
index 141759855..000000000
--- a/newlib/libc/sys/linux/net/resolver.3
+++ /dev/null
@@ -1,422 +0,0 @@
-.\" Copyright (c) 1985, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)resolver.3	8.1 (Berkeley) 6/4/93
-.\" $FreeBSD: src/lib/libc/net/resolver.3,v 1.21 2001/10/01 16:08:56 ru Exp $
-.\"
-.Dd June 4, 1993
-.Dt RESOLVER 3
-.Os
-.Sh NAME
-.Nm res_query ,
-.Nm res_search ,
-.Nm res_mkquery ,
-.Nm res_send ,
-.Nm res_init ,
-.Nm dn_comp ,
-.Nm dn_expand ,
-.Nm dn_skipname ,
-.Nm ns_get16 ,
-.Nm ns_get32 ,
-.Nm ns_put16 ,
-.Nm ns_put32
-.Nd resolver routines
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In netinet/in.h
-.In arpa/nameser.h
-.In resolv.h
-.Ft int
-.Fo res_query
-.Fa "const char *dname"
-.Fa "int class"
-.Fa "int type"
-.Fa "u_char *answer"
-.Fa "int anslen"
-.Fc
-.Ft int
-.Fo res_search
-.Fa "const char *dname"
-.Fa "int class"
-.Fa "int type"
-.Fa "u_char *answer"
-.Fa "int anslen"
-.Fc
-.Ft int
-.Fo res_mkquery
-.Fa "int op"
-.Fa "const char *dname"
-.Fa "int class"
-.Fa "int type"
-.Fa "const u_char *data"
-.Fa "int datalen"
-.Fa "const u_char *newrr_in"
-.Fa "u_char *buf"
-.Fa "int buflen"
-.Fc
-.Ft int
-.Fo res_send
-.Fa "const u_char *msg"
-.Fa "int msglen"
-.Fa "u_char *answer"
-.Fa "int anslen"
-.Fc
-.Ft int
-.Fn res_init
-.Ft int
-.Fo dn_comp
-.Fa "const char *exp_dn"
-.Fa "u_char *comp_dn"
-.Fa "int length"
-.Fa "u_char **dnptrs"
-.Fa "u_char **lastdnptr"
-.Fc
-.Ft int
-.Fo dn_expand
-.Fa "const u_char *msg"
-.Fa "const u_char *eomorig"
-.Fa "const u_char *comp_dn"
-.Fa "char *exp_dn"
-.Fa "int length"
-.Fc
-.Ft int
-.Fn dn_skipname "const u_char *comp_dn" "const u_char *eom"
-.Ft u_int
-.Fn ns_get16 "const u_char *src"
-.Ft u_long
-.Fn ns_get32 "const u_char *src"
-.Ft void
-.Fn ns_put16 "u_int src" "u_char *dst"
-.Ft void
-.Fn ns_put32 "u_long src" "u_char *dst"
-.Sh DESCRIPTION
-These routines are used for making, sending and interpreting
-query and reply messages with Internet domain name servers.
-.Pp
-Global configuration and state information that is used by the
-resolver routines is kept in the structure
-.Em _res .
-Most of the values have reasonable defaults and can be ignored.
-Options
-stored in
-.Em _res.options
-are defined in
-.Pa resolv.h
-and are as follows.
-Options are stored as a simple bit mask containing the bitwise ``or''
-of the options enabled.
-.Bl -tag -width RES_USE_INET6
-.It Dv RES_INIT
-True if the initial name server address and default domain name are
-initialized (i.e.,
-.Fn res_init
-has been called).
-.It Dv RES_DEBUG
-Print debugging messages.
-.It Dv RES_AAONLY
-Accept authoritative answers only.
-With this option,
-.Fn res_send
-should continue until it finds an authoritative answer or finds an error.
-Currently this is not implemented.
-.It Dv RES_USEVC
-Use
-.Tn TCP
-connections for queries instead of
-.Tn UDP
-datagrams.
-.It Dv RES_STAYOPEN
-Used with
-.Dv RES_USEVC
-to keep the
-.Tn TCP
-connection open between
-queries.
-This is useful only in programs that regularly do many queries.
-.Tn UDP
-should be the normal mode used.
-.It Dv RES_IGNTC
-Unused currently (ignore truncation errors, i.e., don't retry with
-.Tn TCP ) .
-.It Dv RES_RECURSE
-Set the recursion-desired bit in queries.
-This is the default.
-.Pf ( Fn res_send
-does not do iterative queries and expects the name server
-to handle recursion.)
-.It Dv RES_DEFNAMES
-If set,
-.Fn res_search
-will append the default domain name to single-component names
-(those that do not contain a dot).
-This option is enabled by default.
-.It Dv RES_DNSRCH
-If this option is set,
-.Fn res_search
-will search for host names in the current domain and in parent domains; see
-.Xr hostname 7 .
-This is used by the standard host lookup routine
-.Xr gethostbyname 3 .
-This option is enabled by default.
-.It Dv RES_NOALIASES
-This option turns off the user level aliasing feature controlled by the
-.Dq Ev HOSTALIASES
-environment variable.  Network daemons should set this option.
-.It Dv RES_USE_INET6
-Enables support for IPv6-only applications.
-This causes IPv4 addresses to be returned as an IPv4 mapped address.
-For example,
-.Li 10.1.1.1
-will be returned as
-.Li ::ffff:10.1.1.1 .
-The option is meaningful with certain kernel configuration only.
-.It Dv RES_USE_EDNS0
-Enables support for OPT pseudo-RR for EDNS0 extension.
-With the option, resolver code will attach OPT pseudo-RR into DNS queries,
-to inform of our receive buffer size.
-The option will allow DNS servers to take advantage of non-default receive
-buffer size, and to send larger replies.
-DNS query packets with EDNS0 extension is not compatible with
-non-EDNS0 DNS servers.
-.El
-.Pp
-The
-.Fn res_init
-routine
-reads the configuration file (if any; see
-.Xr resolver 5 )
-to get the default domain name,
-search list and
-the Internet address of the local name server(s).
-If no server is configured, the host running
-the resolver is tried.
-The current domain name is defined by the hostname
-if not specified in the configuration file;
-it can be overridden by the environment variable
-.Ev LOCALDOMAIN .
-This environment variable may contain several blank-separated
-tokens if you wish to override the
-.Em "search list"
-on a per-process basis.  This is similar to the
-.Em search
-command in the configuration file.
-Another environment variable
-.Dq Ev RES_OPTIONS
-can be set to
-override certain internal resolver options which are otherwise
-set by changing fields in the
-.Em _res
-structure or are inherited from the configuration file's
-.Em options
-command.  The syntax of the
-.Dq Ev RES_OPTIONS
-environment variable is explained in
-.Xr resolver 5 .
-Initialization normally occurs on the first call
-to one of the following routines.
-.Pp
-The
-.Fn res_query
-function provides an interface to the server query mechanism.
-It constructs a query, sends it to the local server,
-awaits a response, and makes preliminary checks on the reply.
-The query requests information of the specified
-.Fa type
-and
-.Fa class
-for the specified fully-qualified domain name
-.Fa dname .
-The reply message is left in the
-.Fa answer
-buffer with length
-.Fa anslen
-supplied by the caller.
-.Pp
-The
-.Fn res_search
-routine makes a query and awaits a response like
-.Fn res_query ,
-but in addition, it implements the default and search rules
-controlled by the
-.Dv RES_DEFNAMES
-and
-.Dv RES_DNSRCH
-options.
-It returns the first successful reply.
-.Pp
-The remaining routines are lower-level routines used by
-.Fn res_query .
-The
-.Fn res_mkquery
-function
-constructs a standard query message and places it in
-.Fa buf .
-It returns the size of the query, or \-1 if the query is
-larger than
-.Fa buflen .
-The query type
-.Fa op
-is usually
-.Dv QUERY ,
-but can be any of the query types defined in
-.Aq Pa arpa/nameser.h .
-The domain name for the query is given by
-.Fa dname .
-.Fa Newrr
-is currently unused but is intended for making update messages.
-.Pp
-The
-.Fn res_send
-routine
-sends a pre-formatted query and returns an answer.
-It will call
-.Fn res_init
-if
-.Dv RES_INIT
-is not set, send the query to the local name server, and
-handle timeouts and retries.
-The length of the reply message is returned, or
-\-1 if there were errors.
-.Pp
-The
-.Fn dn_comp
-function
-compresses the domain name
-.Fa exp_dn
-and stores it in
-.Fa comp_dn .
-The size of the compressed name is returned or \-1 if there were errors.
-The size of the array pointed to by
-.Fa comp_dn
-is given by
-.Fa length .
-The compression uses
-an array of pointers
-.Fa dnptrs
-to previously-compressed names in the current message.
-The first pointer points to
-the beginning of the message and the list ends with
-.Dv NULL .
-The limit to the array is specified by
-.Fa lastdnptr .
-A side effect of
-.Fn dn_comp
-is to update the list of pointers for
-labels inserted into the message
-as the name is compressed.
-If
-.Em dnptr
-is
-.Dv NULL ,
-names are not compressed.
-If
-.Fa lastdnptr
-is
-.Dv NULL ,
-the list of labels is not updated.
-.Pp
-The
-.Fn dn_expand
-entry
-expands the compressed domain name
-.Fa comp_dn
-to a full domain name
-The compressed name is contained in a query or reply message;
-.Fa msg
-is a pointer to the beginning of the message.
-The uncompressed name is placed in the buffer indicated by
-.Fa exp_dn
-which is of size
-.Fa length .
-The size of compressed name is returned or \-1 if there was an error.
-.Pp
-The
-.Fn dn_skipname
-function skips over a compressed domain name, which starts at a location
-pointed to by
-.Fa comp_dn .
-The compressed name is contained in a query or reply message;
-.Fa eom
-is a pointer to the end of the message.
-The size of compressed name is returned or \-1 if there was
-an error.
-.Pp
-The
-.Fn ns_get16
-function gets a 16-bit quantity from a buffer pointed to by
-.Fa src .
-.Pp
-The
-.Fn ns_get32
-function gets a 32-bit quantity from a buffer pointed to by
-.Fa src .
-.Pp
-The
-.Fn ns_put16
-function puts a 16-bit quantity
-.Fa src
-to a buffer pointed to by
-.Fa dst .
-.Pp
-The
-.Fn ns_put32
-function puts a 32-bit quantity
-.Fa src
-to a buffer pointed to by
-.Fa dst .
-.Sh FILES
-.Bl -tag -width /etc/resolv.conf
-.It Pa /etc/resolv.conf
-The configuration file,
-see
-.Xr resolver 5 .
-.El
-.Sh SEE ALSO
-.Xr gethostbyname 3 ,
-.Xr resolver 5 ,
-.Xr hostname 7 ,
-.Xr named 8
-.Pp
-.%T RFC1032 ,
-.%T RFC1033 ,
-.%T RFC1034 ,
-.%T RFC1035 ,
-.%T RFC974
-.Rs
-.%T "Name Server Operations Guide for BIND"
-.Re
-.Sh HISTORY
-The
-.Nm
-function appeared in
-.Bx 4.3 .
diff --git a/newlib/libc/sys/linux/net/rthdr.c b/newlib/libc/sys/linux/net/rthdr.c
deleted file mode 100644
index e5f7814b1..000000000
--- a/newlib/libc/sys/linux/net/rthdr.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*	$KAME: rthdr.c,v 1.8 2001/08/20 02:32:40 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <netinet/in.h>
-#include <netinet/ip6.h>
-
-#include <string.h>
-#include <stdio.h>
-
-/* to define items, should talk with KAME guys first, for *BSD compatibility */
-
-#define IPV6_RTHDR_LOOSE     0 /* this hop need not be a neighbor. XXX old spec */
-#define IPV6_RTHDR_STRICT    1 /* this hop must be a neighbor. XXX old spec */
-#define IPV6_RTHDR_TYPE_0    0 /* IPv6 routing header type 0 */
-
-size_t
-inet6_rthdr_space(type, seg)
-    int type, seg;
-{
-    switch(type) {
-     case IPV6_RTHDR_TYPE_0:
-	 if (seg < 1 || seg > 23)
-	     return(0);
-	 return(CMSG_SPACE(sizeof(struct in6_addr) * (seg - 1)
-			   + sizeof(struct ip6_rthdr0)));
-     default:
-#ifdef DEBUG
-	 fprintf(stderr, "inet6_rthdr_space: unknown type(%d)\n", type);
-#endif 
-	 return(0);
-    }
-}
-
-struct cmsghdr *
-inet6_rthdr_init(bp, type)
-    void *bp;
-    int type;
-{
-    struct cmsghdr *ch = (struct cmsghdr *)bp;
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(ch);
-
-    ch->cmsg_level = IPPROTO_IPV6;
-    ch->cmsg_type = IPV6_RTHDR;
-
-    switch(type) {
-     case IPV6_RTHDR_TYPE_0:
-	 ch->cmsg_len = CMSG_LEN(sizeof(struct ip6_rthdr0) - sizeof(struct in6_addr));
-	 bzero(rthdr, sizeof(struct ip6_rthdr0));
-	 rthdr->ip6r_type = IPV6_RTHDR_TYPE_0;
-	 return(ch);
-     default:
-#ifdef DEBUG
-	 fprintf(stderr, "inet6_rthdr_init: unknown type(%d)\n", type);
-#endif 
-	 return(NULL);
-    }
-}
-
-int
-inet6_rthdr_add(cmsg, addr, flags)
-    struct cmsghdr *cmsg;
-    const struct in6_addr *addr;
-    u_int flags;
-{
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(cmsg);
-
-    switch(rthdr->ip6r_type) {
-     case IPV6_RTHDR_TYPE_0:
-     {
-	 struct ip6_rthdr0 *rt0 = (struct ip6_rthdr0 *)rthdr;
-	 if (flags != IPV6_RTHDR_LOOSE && flags != IPV6_RTHDR_STRICT) {
-#ifdef DEBUG
-	     fprintf(stderr, "inet6_rthdr_add: unsupported flag(%d)\n", flags);
-#endif 
-	     return(-1);
-	 }
-	 if (rt0->ip6r0_segleft == 23) {
-#ifdef DEBUG
-	     fprintf(stderr, "inet6_rthdr_add: segment overflow\n");
-#endif 
-	     return(-1);
-	 }
-	 if (flags == IPV6_RTHDR_STRICT) {
-	     int c, b;
-	     c = rt0->ip6r0_segleft / 8;
-	     b = rt0->ip6r0_segleft % 8;
-	     rt0->ip6r0_slmap[c] |= (1 << (7 - b));
-	 }
-	 rt0->ip6r0_segleft++;
-	 bcopy(addr, (caddr_t)rt0 + ((rt0->ip6r0_len + 1) << 3),
-	       sizeof(struct in6_addr));
-	 rt0->ip6r0_len += sizeof(struct in6_addr) >> 3;
-	 cmsg->cmsg_len = CMSG_LEN((rt0->ip6r0_len + 1) << 3);
-	 break;
-     }
-     default:
-#ifdef DEBUG
-	 fprintf(stderr, "inet6_rthdr_add: unknown type(%d)\n",
-		 rthdr->ip6r_type);
-#endif 
-	 return(-1);
-    }
-
-    return(0);
-}
-
-int
-inet6_rthdr_lasthop(cmsg, flags)
-    struct cmsghdr *cmsg;
-    unsigned int flags;
-{
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(cmsg);
-
-    switch(rthdr->ip6r_type) {
-     case IPV6_RTHDR_TYPE_0:
-     {
-	 struct ip6_rthdr0 *rt0 = (struct ip6_rthdr0 *)rthdr;
-	 if (flags != IPV6_RTHDR_LOOSE && flags != IPV6_RTHDR_STRICT) {
-#ifdef DEBUG
-	     fprintf(stderr, "inet6_rthdr_lasthop: unsupported flag(%d)\n", flags);
-#endif 
-	     return(-1);
-	 }
-	 if (rt0->ip6r0_segleft > 23) {
-#ifdef DEBUG
-	     fprintf(stderr, "inet6_rthdr_add: segment overflow\n");
-#endif 
-	     return(-1);
-	 }
-	 if (flags == IPV6_RTHDR_STRICT) {
-	     int c, b;
-	     c = rt0->ip6r0_segleft / 8;
-	     b = rt0->ip6r0_segleft % 8;
-	     rt0->ip6r0_slmap[c] |= (1 << (7 - b));
-	 }
-	 break;
-     }
-     default:
-#ifdef DEBUG
-	 fprintf(stderr, "inet6_rthdr_lasthop: unknown type(%d)\n",
-		 rthdr->ip6r_type);
-#endif 
-	 return(-1);
-    }
-
-    return(0);
-}
-
-#if 0
-int
-inet6_rthdr_reverse(in, out)
-    const struct cmsghdr *in;
-    struct cmsghdr *out;
-{
-#ifdef DEBUG
-    fprintf(stderr, "inet6_rthdr_reverse: not implemented yet\n");
-#endif 
-    return -1;
-}
-#endif
-
-int
-inet6_rthdr_segments(cmsg)
-    const struct cmsghdr *cmsg;
-{
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(cmsg);
-
-    switch(rthdr->ip6r_type) {
-    case IPV6_RTHDR_TYPE_0:
-      {
-	struct ip6_rthdr0 *rt0 = (struct ip6_rthdr0 *)rthdr;
-
-	if (rt0->ip6r0_len % 2 || 46 < rt0->ip6r0_len) {
-#ifdef DEBUG
-	    fprintf(stderr, "inet6_rthdr_segments: invalid size(%d)\n",
-		rt0->ip6r0_len);
-#endif 
-	    return -1;
-	}
-
-	return (rt0->ip6r0_len * 8) / sizeof(struct in6_addr);
-      }
-
-    default:
-#ifdef DEBUG
-	fprintf(stderr, "inet6_rthdr_segments: unknown type(%d)\n",
-	    rthdr->ip6r_type);
-#endif 
-	return -1;
-    }
-}
-
-struct in6_addr *
-inet6_rthdr_getaddr(cmsg, idx)
-    struct cmsghdr *cmsg;
-    int idx;
-{
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(cmsg);
-
-    switch(rthdr->ip6r_type) {
-    case IPV6_RTHDR_TYPE_0:
-      {
-	struct ip6_rthdr0 *rt0 = (struct ip6_rthdr0 *)rthdr;
-	int naddr;
-
-	if (rt0->ip6r0_len % 2 || 46 < rt0->ip6r0_len) {
-#ifdef DEBUG
-	    fprintf(stderr, "inet6_rthdr_getaddr: invalid size(%d)\n",
-		rt0->ip6r0_len);
-#endif 
-	    return NULL;
-	}
-	naddr = (rt0->ip6r0_len * 8) / sizeof(struct in6_addr);
-	if (idx <= 0 || naddr < idx) {
-#ifdef DEBUG
-	    fprintf(stderr, "inet6_rthdr_getaddr: invalid idx(%d)\n", idx);
-#endif 
-	    return NULL;
-	}
-	return &rt0->ip6r0_addr[idx - 1];
-      }
-
-    default:
-#ifdef DEBUG
-	fprintf(stderr, "inet6_rthdr_getaddr: unknown type(%d)\n",
-	    rthdr->ip6r_type);
-#endif 
-	return NULL;
-    }
-}
-
-int
-inet6_rthdr_getflags(cmsg, idx)
-    const struct cmsghdr *cmsg;
-    int idx;
-{
-    struct ip6_rthdr *rthdr;
-
-    rthdr = (struct ip6_rthdr *)CMSG_DATA(cmsg);
-
-    switch(rthdr->ip6r_type) {
-    case IPV6_RTHDR_TYPE_0:
-      {
-	struct ip6_rthdr0 *rt0 = (struct ip6_rthdr0 *)rthdr;
-	int naddr;
-
-	if (rt0->ip6r0_len % 2 || 46 < rt0->ip6r0_len) {
-#ifdef DEBUG
-	    fprintf(stderr, "inet6_rthdr_getflags: invalid size(%d)\n",
-		rt0->ip6r0_len);
-#endif 
-	    return -1;
-	}
-	naddr = (rt0->ip6r0_len * 8) / sizeof(struct in6_addr);
-	if (idx < 0 || naddr < idx) {
-#ifdef DEBUG
-	    fprintf(stderr, "inet6_rthdr_getflags: invalid idx(%d)\n", idx);
-#endif 
-	    return -1;
-	}
-	if (rt0->ip6r0_slmap[idx / 8] & (0x80 >> (idx % 8)))
-	    return IPV6_RTHDR_STRICT;
-	else
-	    return IPV6_RTHDR_LOOSE;
-      }
-
-    default:
-#ifdef DEBUG
-	fprintf(stderr, "inet6_rthdr_getflags: unknown type(%d)\n",
-	    rthdr->ip6r_type);
-#endif 
-	return -1;
-    }
-}
diff --git a/newlib/libc/sys/linux/net/send.c b/newlib/libc/sys/linux/net/send.c
deleted file mode 100644
index 8ff65d015..000000000
--- a/newlib/libc/sys/linux/net/send.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)send.c	8.2 (Berkeley) 2/21/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include "namespace.h"
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#include <stddef.h>
-#include "un-namespace.h"
-
-ssize_t
-send(s, msg, len, flags)
-	int s, flags;
-	size_t len;
-	const void *msg;
-{
-	return (sendto(s, msg, len, flags, NULL, 0));
-}
diff --git a/newlib/libc/sys/linux/net/un-namespace.h b/newlib/libc/sys/linux/net/un-namespace.h
deleted file mode 100644
index 912109a0e..000000000
--- a/newlib/libc/sys/linux/net/un-namespace.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/include/un-namespace.h,v 1.7 2002/03/29 22:43:42 markm Exp $
- */
-
-#ifndef _UN_NAMESPACE_H_
-#define _UN_NAMESPACE_H_
-
-#undef		accept
-#undef		__acl_aclcheck_fd
-#undef		__acl_delete_fd
-#undef		__acl_get_fd
-#undef		__acl_set_fd
-#undef		bind
-#undef		__cap_get_fd
-#undef		__cap_set_fd
-#undef		close
-#undef		connect
-#undef		dup
-#undef		dup2
-#undef		execve
-#undef		fcntl
-#undef		flock
-#undef		fstat
-#undef		fstatfs
-#undef		fsync
-#undef		getdirentries
-#undef		getlogin
-#undef		getpeername
-#undef		getprogname
-#undef		getsockname
-#undef		getsockopt
-#undef		ioctl
-#undef		listen
-#undef		nanosleep
-#undef		open
-#undef		pthread_getspecific
-#undef		pthread_key_create
-#undef		pthread_key_delete
-#undef		pthread_mutex_destroy
-#undef		pthread_mutex_init
-#undef		pthread_mutex_lock
-#undef		pthread_mutex_trylock
-#undef		pthread_mutex_unlock
-#undef		pthread_mutexattr_init
-#undef		pthread_mutexattr_destroy
-#undef		pthread_mutexattr_settype
-#undef		pthread_once
-#undef		pthread_self
-#undef		pthread_setspecific
-#undef		read
-#undef		readv
-#undef		recvfrom
-#undef		recvmsg
-#undef		select
-#undef		sendmsg
-#undef		sendto
-#undef		setsockopt
-#undef		sigaction
-#undef		sigprocmask
-#undef		sigsuspend
-#undef		socket
-#undef		socketpair
-#undef		wait4
-#undef		write
-#undef		writev
-
-#if 0
-#undef		creat
-#undef		fchflags
-#undef		fchmod
-#undef		fpathconf
-#undef		msync
-#undef		nfssvc
-#undef		pause
-#undef		poll
-#undef		pthread_rwlock_destroy
-#undef		pthread_rwlock_init
-#undef		pthread_rwlock_rdlock
-#undef		pthread_rwlock_tryrdlock
-#undef		pthread_rwlock_trywrlock
-#undef		pthread_rwlock_unlock
-#undef		pthread_rwlock_wrlock
-#undef		pthread_rwlockattr_init
-#undef		pthread_rwlockattr_destroy
-#undef		sched_yield
-#undef		sendfile
-#undef		shutdown
-#undef		sigaltstack
-#undef		sigpending
-#undef		sigreturn
-#undef		sigsetmask
-#undef		sleep
-#undef		system
-#undef		tcdrain
-#undef		wait
-#undef		waitpid
-#endif	/* 0 */
-
-#ifdef _SIGNAL_H_
-int     	_sigaction(int, const struct sigaction *, struct sigaction *);
-#endif
-
-#ifdef _SYS_FCNTL_H_
-int		_flock(int, int);
-#endif
-
-#undef		err
-#undef		warn
-
-#endif	/* _UN_NAMESPACE_H_ */
diff --git a/newlib/libc/sys/linux/net/vars.c b/newlib/libc/sys/linux/net/vars.c
deleted file mode 100644
index c91a04bd1..000000000
--- a/newlib/libc/sys/linux/net/vars.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*	$KAME: vars.c,v 1.2 2001/08/20 02:32:41 itojun Exp $	*/
-
-/*
- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <sys/types.h>
-#include <netinet/in.h>
-
-/*
- * Definitions of some costant IPv6 addresses.
- */
-const struct in6_addr in6addr_any = IN6ADDR_ANY_INIT;
-const struct in6_addr in6addr_loopback = IN6ADDR_LOOPBACK_INIT;
-const struct in6_addr in6addr_nodelocal_allnodes = IN6ADDR_NODELOCAL_ALLNODES_INIT;
-const struct in6_addr in6addr_linklocal_allnodes = IN6ADDR_LINKLOCAL_ALLNODES_INIT;
-
diff --git a/newlib/libc/sys/linux/ntp_gettime.c b/newlib/libc/sys/linux/ntp_gettime.c
deleted file mode 100644
index 2bcabbc63..000000000
--- a/newlib/libc/sys/linux/ntp_gettime.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <sys/timex.h>
-
-#ifndef MOD_OFFSET
-# define modes mode
-#endif
-
-int
-ntp_gettime (ntv)
-     struct ntptimeval *ntv;
-{
-  struct timex tntx;
-  int result;
-
-  tntx.modes = 0;
-  result = __adjtimex (&tntx);
-  ntv->time = tntx.time;
-  ntv->maxerror = tntx.maxerror;
-  ntv->esterror = tntx.esterror;
-  return result;
-}
diff --git a/newlib/libc/sys/linux/pathconf.c b/newlib/libc/sys/linux/pathconf.c
deleted file mode 100644
index 796945971..000000000
--- a/newlib/libc/sys/linux/pathconf.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* Linux specific extensions to pathconf.
-   Copyright (C) 1991,95,96,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib July 19, 2002 - Jeff Johnston */
-
-#include <errno.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <limits.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
-#include <sys/statvfs.h>
-#include <machine/weakalias.h>
-#include "linux_fsinfo.h"
-
-/* The Linux kernel header mentioned this as a kind of generic value.  */
-#define LINUX_LINK_MAX	127
-
-static long int posix_pathconf (const char *path, int name);
-
-
-/* Get file-specific information about descriptor FD.  */
-long int
-__pathconf (path, name)
-     const char *path;
-     int name;
-{
-  if (name == _PC_LINK_MAX)
-    {
-      struct statfs fsbuf;
-
-      /* Determine the filesystem type.  */
-      if (__statfs (path, &fsbuf) < 0)
-	{
-	  if (errno == ENOSYS)
-	    /* not possible, return the default value.  */
-	    return LINUX_LINK_MAX;
-
-	  /* Some error occured.  */
-          return -1;
-	}
-
-      switch (fsbuf.f_type)
-	{
-	case EXT2_SUPER_MAGIC:
-	  return EXT2_LINK_MAX;
-
-	case MINIX_SUPER_MAGIC:
-	case MINIX_SUPER_MAGIC2:
-	  return MINIX_LINK_MAX;
-
-	case MINIX2_SUPER_MAGIC:
-	case MINIX2_SUPER_MAGIC2:
-	  return MINIX2_LINK_MAX;
-
-	case XENIX_SUPER_MAGIC:
-	  return XENIX_LINK_MAX;
-
-	case SYSV4_SUPER_MAGIC:
-	case SYSV2_SUPER_MAGIC:
-	  return SYSV_LINK_MAX;
-
-	case COH_SUPER_MAGIC:
-	  return COH_LINK_MAX;
-
-	case UFS_MAGIC:
-	case UFS_CIGAM:
-	  return UFS_LINK_MAX;
-
-	case REISERFS_SUPER_MAGIC:
-	  return REISERFS_LINK_MAX;
-
-	default:
-	  return LINUX_LINK_MAX;
-	}
-    }
-
-  return posix_pathconf (path, name);
-}
-
-/* Get file-specific information about PATH.  */
-static long int
-posix_pathconf (const char *path, int name)
-{
-  if (path[0] == '\0')
-    {
-      __set_errno (ENOENT);
-      return -1;
-    }
-
-  switch (name)
-    {
-    default:
-      __set_errno (EINVAL);
-      return -1;
-
-    case _PC_LINK_MAX:
-#ifdef	LINK_MAX
-      return LINK_MAX;
-#else
-      return -1;
-#endif
-
-    case _PC_MAX_CANON:
-#ifdef	MAX_CANON
-      return MAX_CANON;
-#else
-      return -1;
-#endif
-
-    case _PC_MAX_INPUT:
-#ifdef	MAX_INPUT
-      return MAX_INPUT;
-#else
-      return -1;
-#endif
-
-    case _PC_NAME_MAX:
-#ifdef	NAME_MAX
-      {
-	struct statfs buf;
-	int save_errno = errno;
-
-	if (__statfs (path, &buf) < 0)
-	  {
-	    if (errno == ENOSYS)
-	      {
-		errno = save_errno;
-		return NAME_MAX;
-	      }
-	    return -1;
-	  }
-	else
-	  {
-#ifdef _STATFS_F_NAMELEN
-	    return buf.f_namelen;
-#else
-# ifdef _STATFS_F_NAME_MAX
-	    return buf.f_name_max;
-# else
-	    return NAME_MAX;
-# endif
-#endif
-	  }
-      }
-#else
-      return -1;
-#endif
-
-    case _PC_PATH_MAX:
-#ifdef	PATH_MAX
-      return PATH_MAX;
-#else
-      return -1;
-#endif
-
-    case _PC_PIPE_BUF:
-#ifdef	PIPE_BUF
-      return PIPE_BUF;
-#else
-      return -1;
-#endif
-
-    case _PC_CHOWN_RESTRICTED:
-#ifdef	_POSIX_CHOWN_RESTRICTED
-      return _POSIX_CHOWN_RESTRICTED;
-#else
-      return -1;
-#endif
-
-    case _PC_NO_TRUNC:
-#ifdef	_POSIX_NO_TRUNC
-      return _POSIX_NO_TRUNC;
-#else
-      return -1;
-#endif
-
-    case _PC_VDISABLE:
-#ifdef	_POSIX_VDISABLE
-      return _POSIX_VDISABLE;
-#else
-      return -1;
-#endif
-
-    case _PC_SYNC_IO:
-#ifdef	_POSIX_SYNC_IO
-      return _POSIX_SYNC_IO;
-#else
-      return -1;
-#endif
-
-    case _PC_ASYNC_IO:
-#ifdef	_POSIX_ASYNC_IO
-      {
-	/* AIO is only allowed on regular files and block devices.  */
-	struct stat64 st;
-
-	if (stat64 (path, &st) < 0
-	    || (! S_ISREG (st.st_mode) && ! S_ISBLK (st.st_mode)))
-	  return -1;
-	else
-	  return 1;
-      }
-#else
-      return -1;
-#endif
-
-    case _PC_PRIO_IO:
-#ifdef	_POSIX_PRIO_IO
-      return _POSIX_PRIO_IO;
-#else
-      return -1;
-#endif
-
-    case _PC_SOCK_MAXBUF:
-#ifdef	SOCK_MAXBUF
-      return SOCK_MAXBUF;
-#else
-      return -1;
-#endif
-
-    case _PC_FILESIZEBITS:
-#ifdef FILESIZEBITS
-      return FILESIZEBITS;
-#else
-      /* We let platforms with larger file sizes overwrite this value.  */
-      return 32;
-#endif
-
-    case _PC_REC_INCR_XFER_SIZE:
-      /* XXX It is not entirely clear what the limit is supposed to do.
-	 What is incremented?  */
-      return -1;
-
-    case _PC_REC_MAX_XFER_SIZE:
-      /* XXX It is not entirely clear what the limit is supposed to do.
-	 In general there is no top limit of the number of bytes which
-	 case be transported at once.  */
-      return -1;
-
-    case _PC_REC_MIN_XFER_SIZE:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume this is the block size of the filesystem.  */
-	struct statvfs64 sv;
-
-	if (__statvfs64 (path, &sv) < 0)
-	  return -1;
-	return sv.f_bsize;
-      }
-
-    case _PC_REC_XFER_ALIGN:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume that the number should reflect the minimal block
-	   alignment.  */
-	struct statvfs64 sv;
-
-	if (__statvfs64 (path, &sv) < 0)
-	  return -1;
-	return sv.f_frsize;
-      }
-
-    case _PC_ALLOC_SIZE_MIN:
-      {
-	/* XXX It is not entirely clear what the limit is supposed to do.
-	   I assume that the number should reflect the minimal block
-	   alignment.  */
-	struct statvfs64 sv;
-
-	if (__statvfs64 (path, &sv) < 0)
-	  return -1;
-	return sv.f_frsize;
-      }
-
-    case _PC_SYMLINK_MAX:
-      /* In general there are no limits.  If a system has one it should
-	 overwrite this case.  */
-      return -1;
-    }
-}
-
-weak_alias (__pathconf, pathconf)
diff --git a/newlib/libc/sys/linux/pread.c b/newlib/libc/sys/linux/pread.c
deleted file mode 100644
index ff8371e15..000000000
--- a/newlib/libc/sys/linux/pread.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Linux version of pread so we can have a weak_alias */
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-#include <machine/weakalias.h>
-
-ssize_t
-_DEFUN (_pread_r, (rptr, fd, buf, n, off),
-     struct _reent *rptr _AND
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  off_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_read;
-  
-  if ((cur_pos = _lseek_r (rptr, fd, 0, SEEK_CUR)) == (off_t)-1)
-    return -1;
-
-  if (_lseek_r (rptr, fd, off, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  num_read = _read_r (rptr, fd, buf, n);
-
-  if (_lseek_r (rptr, fd, cur_pos, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  return (ssize_t)num_read;
-}
-
-#ifndef _REENT_ONLY
-
-ssize_t
-_DEFUN (__libc_pread, (fd, buf, n, off),
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  return _pread_r (_REENT, fd, buf, n, off);
-}
-weak_alias(__libc_pread,pread)
-
-#endif
diff --git a/newlib/libc/sys/linux/pread64.c b/newlib/libc/sys/linux/pread64.c
deleted file mode 100644
index c4bdca706..000000000
--- a/newlib/libc/sys/linux/pread64.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
-FUNCTION
-<<pread64>>---read a large file from specified position
-
-INDEX
-	pread64
-
-ANSI_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pread64(int <[fd]>, void *<[buf]>, size_t <[n]>, loff_t <[off]>);
-
-TRAD_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pread64(<[fd]>, <[buf]>, <[n]>, <[off]>)
-	int <[fd]>;
-	void *<[buf]>;
-	size_t <[n]>;
-	loff_t <[off]>;
-
-DESCRIPTION
-The <<pread64>> function is similar to <<pread>>.  The only difference is
-that it operates on large files and so takes a 64-bit offset.  Like <<pread>>>,
-the file position is unchanged by the function (i.e. the file position
-is the same before and after a call to <<pread>>).
-
-RETURNS
-<<pread64>> returns the number of bytes read or <<-1>> if failure occurred.
-
-PORTABILITY
-<<pread64>> is an EL/IX extension.
-
-Supporting OS subroutine required: <<read>>, <<lseek64>>.
-*/
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-#include <machine/weakalias.h>
-
-ssize_t
-_DEFUN (__libc_pread64, (fd, buf, n, off),
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     loff_t off)
-{
-  loff_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_read;
-  
-  if ((cur_pos = lseek64 (fd, 0, SEEK_CUR)) == (loff_t)-1)
-    return -1;
-
-  if (lseek64 (fd, off, SEEK_SET) == (loff_t)-1)
-    return -1;
-
-  num_read = read (fd, buf, n);
-
-  if (lseek64 (fd, cur_pos, SEEK_SET) == (loff_t)-1)
-    return -1;
-
-  return (ssize_t)num_read;
-}
-weak_alias(__libc_pread64,pread64);
-weak_alias(__libc_pread64,__pread64);
-
diff --git a/newlib/libc/sys/linux/process.c b/newlib/libc/sys/linux/process.c
deleted file mode 100644
index 160b80137..000000000
--- a/newlib/libc/sys/linux/process.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* libc/sys/linux/process.c - Process-related system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <sys/unistd.h>
-#include <sys/wait.h>
-#include <machine/syscall.h>
-
-
-#define __NR__exit __NR_exit
-#define __NR__execve __NR_execve
-
-_syscall0(int,getpid)
-_syscall0(pid_t,getppid)
-
-weak_alias(__libc_getpid,__getpid);
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-_syscall3(int,_execve,const char *,file,char * const *,argv,char * const *,envp)
-_syscall0(int,fork)
-#endif /* _ELIX_LEVEL >= 3 */
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-_syscall0(pid_t,getpgrp)
-_syscall2(int,setpgid,pid_t,pid,pid_t,pgid)
-_syscall0(pid_t,setsid)
-
-/* Here we implement vfork in terms of fork, since
- * Linux's vfork system call is not reliable.
- */
-pid_t vfork(void)
-{
-  pid_t pid;
-
-  pid = fork();
-  
-  if(!pid)
-    {
-      /* In child. */
-      return 0;
-    }
-  else
-    {
-      /* In parent.  Wait for child to finish. */
-      if (waitpid (pid, NULL, 0) < 0)
-        return pid;
-    }
-}
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 4 */
-
-
-/* Although _exit is listed as level 3, we use it from level 1 interfaces */
-/* FIXME: get rid of noreturn warning */
-
-#define return for (;;)
-_syscall1(void,_exit,int,exitcode)
-#undef return
diff --git a/newlib/libc/sys/linux/prof-freq.c b/newlib/libc/sys/linux/prof-freq.c
deleted file mode 100644
index 829979bbb..000000000
--- a/newlib/libc/sys/linux/prof-freq.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Return frequency of ticks reported by profil.  Generic version. */
-/*-
- * Copyright (c) 1983, 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <libc-internal.h>
-
-int
-__profile_frequency (void)
-{
-  /*
-   * Discover the tick frequency of the machine if something goes wrong,
-   * we return 0, an impossible hertz.
-   */
-  struct itimerval tim;
-
-  tim.it_interval.tv_sec = 0;
-  tim.it_interval.tv_usec = 1;
-  tim.it_value.tv_sec = 0;
-  tim.it_value.tv_usec = 0;
-  setitimer(ITIMER_REAL, &tim, 0);
-  setitimer(ITIMER_REAL, 0, &tim);
-  if (tim.it_interval.tv_usec < 2)
-    return 0;
-  return (1000000 / tim.it_interval.tv_usec);
-}
diff --git a/newlib/libc/sys/linux/profile.c b/newlib/libc/sys/linux/profile.c
deleted file mode 100644
index f36e2c753..000000000
--- a/newlib/libc/sys/linux/profile.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/* libc/sys/linux/profile.c - profiling system call */
-
-#include <errno.h>
-#include <sys/types.h>
-#include <machine/syscall.h>
-
-#define __NR_profil 98
-
-int  profil(u_short  *buf,  size_t  bufsiz, size_t offset,
-            u_int scale);
-
-_syscall4(int,profil,unsigned short *,buf,size_t,bufsiz,size_t,offset,unsigned int, scale)
diff --git a/newlib/libc/sys/linux/psignal.c b/newlib/libc/sys/linux/psignal.c
deleted file mode 100644
index f5fedc9fa..000000000
--- a/newlib/libc/sys/linux/psignal.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* libc/sys/linux/psignal.c - print signal message to stderr */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <stdio.h>
-#include <string.h>
-
-void
-psignal (int sig, const char *s)
-{
-  if (s != NULL)
-    fprintf (stderr, "%s: %s\n", s, strsignal (sig));
-  else
-    fprintf (stderr, "%s\n", strsignal (sig));
-}
diff --git a/newlib/libc/sys/linux/pvallocr.c b/newlib/libc/sys/linux/pvallocr.c
deleted file mode 100644
index 716ea0c12..000000000
--- a/newlib/libc/sys/linux/pvallocr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void * 
-_pvalloc_r (struct _reent *ptr, size_t bytes)
-{
-  return pvalloc (bytes);
-}
diff --git a/newlib/libc/sys/linux/pwrite.c b/newlib/libc/sys/linux/pwrite.c
deleted file mode 100644
index 239463e59..000000000
--- a/newlib/libc/sys/linux/pwrite.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Linux version of pwrite so we can have a weak alias */
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-#include <machine/weakalias.h>
-
-ssize_t
-_DEFUN (_pwrite_r, (rptr, fd, buf, n, off),
-     struct _reent *rptr _AND
-     int fd _AND
-     _CONST _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  off_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_written;
-  
-  if ((cur_pos = _lseek_r (rptr, fd, 0, SEEK_CUR)) == (off_t)-1)
-    return -1;
-
-  if (_lseek_r (rptr, fd, off, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  num_written = _write_r (rptr, fd, buf, n);
-
-  if (_lseek_r (rptr, fd, cur_pos, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  return (ssize_t)num_written;
-}
-
-#ifndef _REENT_ONLY
-
-ssize_t
-_DEFUN (__libc_pwrite, (fd, buf, n, off),
-     int fd _AND
-     _CONST _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  return _pwrite_r (_REENT, fd, buf, n, off);
-}
-weak_alias(__libc_pwrite,pwrite)
-
-#endif
diff --git a/newlib/libc/sys/linux/pwrite64.c b/newlib/libc/sys/linux/pwrite64.c
deleted file mode 100644
index f1d678493..000000000
--- a/newlib/libc/sys/linux/pwrite64.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-FUNCTION
-<<pwrite64>>---write a large file from specified position
-
-INDEX
-	pwrite64
-
-ANSI_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pwrite64(int <[fd]>, void *<[buf]>, size_t <[n]>, loff_t <[off]>);
-
-TRAD_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pwrite64(<[fd]>, <[buf]>, <[n]>, <[off]>)
-	int <[fd]>;
-	void *<[buf]>;
-	size_t <[n]>;
-	loff_t <[off]>;
-
-DESCRIPTION
-The <<pwrite64>> function is similar to <<pwrite>>.  The only difference is
-that it operates on large files and so takes a 64-bit offset.  Like <<pwrite>>>,
-the file position is unchanged by the function (i.e. the file position
-is the same before and after a call to <<pwrite>>).
-
-RETURNS
-<<pwrite64>> returns the number of bytes written or <<-1>> if failure occurred.
-
-PORTABILITY
-<<pwrite64>> is an EL/IX extension.
-
-Supporting OS subroutine required: <<write>>, <<lseek64>>.
-*/
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-#include <machine/weakalias.h>
-
-ssize_t
-_DEFUN (__libc_pwrite64, (fd, buf, n, off),
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     loff_t off)
-{
-  loff_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_written;
-  
-  if ((cur_pos = lseek64 (fd, 0, SEEK_CUR)) == (loff_t)-1)
-    return -1;
-
-  if (lseek64 (fd, off, SEEK_SET) == (loff_t)-1)
-    return -1;
-
-  num_written = write (fd, buf, n);
-
-  if (lseek64 (fd, cur_pos, SEEK_SET) == (loff_t)-1)
-    return -1;
-
-  return (ssize_t)num_written;
-}
-weak_alias(__libc_pwrite64,pwrite64)
-
diff --git a/newlib/libc/sys/linux/raise.c b/newlib/libc/sys/linux/raise.c
deleted file mode 100644
index d69561be1..000000000
--- a/newlib/libc/sys/linux/raise.c
+++ /dev/null
@@ -1,3 +0,0 @@
-/* empty file so we override regular raise */
-
-
diff --git a/newlib/libc/sys/linux/readdir64.c b/newlib/libc/sys/linux/readdir64.c
deleted file mode 100644
index 78fe98e90..000000000
--- a/newlib/libc/sys/linux/readdir64.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/* Modified from newlib/libc/posix/readdir.c */
-
-#include <dirent.h>
-#include <machine/syscall.h>
-
-#define __NR___getdents64 __NR_getdents64
-
-static _syscall3(int,__getdents64,int,fd,struct dirent64 *,dirp,unsigned int,count)
-
-/*
- * get next entry in a directory.
- */
-struct dirent64 *
-__readdir64 (dirp)
-register DIR *dirp; {
-  register struct dirent64 *dp;
- 
-#ifdef HAVE_DD_LOCK
-  __lock_acquire_recursive(dirp->dd_lock);
-#endif
-
-  if (dirp->dd_fd == -1)
-    return NULL;
- 
-  for (;;) {
-    if (dirp->dd_loc == 0) {
-      dirp->dd_size = __getdents64 (dirp->dd_fd,
-				    (void *)dirp->dd_buf,
-				    dirp->dd_len);
-      
-      if (dirp->dd_size <= 0) {
-#ifdef HAVE_DD_LOCK
-        __lock_release_recursive(dirp->dd_lock);
-#endif
-	return NULL;
-      }
-    }
-    if (dirp->dd_loc >= dirp->dd_size) {
-      dirp->dd_loc = 0;
-      continue;
-    }
-    dp = (struct dirent64 *)(dirp->dd_buf + dirp->dd_loc);
-    if ((int)dp & 03) {	/* bogus pointer check */
-#ifdef HAVE_DD_LOCK
-      __lock_release_recursive(dirp->dd_lock);
-#endif
-      return NULL;
-    }
-    if (dp->d_reclen <= 0 ||
-	dp->d_reclen > dirp->dd_len + 1 - dirp->dd_loc) {
-#ifdef HAVE_DD_LOCK
-      __lock_release_recursive(dirp->dd_lock);
-#endif
-      return NULL;
-    }
-    dirp->dd_loc += dp->d_reclen;
-    if (dp->d_ino == 0)
-      continue;
-#ifdef HAVE_DD_LOCK
-    __lock_release_recursive(dirp->dd_lock);
-#endif
-    return (dp);
-  }
-}
diff --git a/newlib/libc/sys/linux/realloc.c b/newlib/libc/sys/linux/realloc.c
deleted file mode 100644
index 818e05a75..000000000
--- a/newlib/libc/sys/linux/realloc.c
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy file to override one object in stdlib directory */
diff --git a/newlib/libc/sys/linux/reallocr.c b/newlib/libc/sys/linux/reallocr.c
deleted file mode 100644
index 873c1b0e5..000000000
--- a/newlib/libc/sys/linux/reallocr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void *
-_realloc_r (struct _reent *ptr, void *old, size_t newlen)
-{
-  return realloc (old, newlen);
-}
diff --git a/newlib/libc/sys/linux/realpath.c b/newlib/libc/sys/linux/realpath.c
deleted file mode 100644
index 8aa5eb445..000000000
--- a/newlib/libc/sys/linux/realpath.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* realpath.c - Return the canonicalized absolute pathname */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <limits.h>
-#include <errno.h>
-#include <sys/stat.h>
-
-
-/* FIXME: buffer overrun possible, loops forever on cyclic symlinks */
-
-
-/*
- * Canonical name: never ends with a slash
- */
-
-static int resolve_path(char *path,char *result,char *pos)
-{
-    if (*path == '/') {
-	*result = '/';
-	pos = result+1;
-	path++;
-    }
-    *pos = 0;
-    if (!*path) return 0;
-    while (1) {
-	char *slash;
-	struct stat st;
-
-	slash = *path ? strchr(path,'/') : NULL;
-	if (slash) *slash = 0;
-	if (!path[0] || (path[0] == '.' &&
-	  (!path[1] || (path[1] == '.' && !path[2])))) {
-	    pos--;
-	    if (pos != result && path[0] && path[1])
-		while (*--pos != '/');
-	}
-	else {
-	    strcpy(pos,path);
-	    if (lstat(result,&st) < 0) return -1;
-	    if (S_ISLNK(st.st_mode)) {
-		char buf[PATH_MAX];
-
-		if (readlink(result,buf,sizeof(buf)) < 0) return -1;
-		*pos = 0;
-		if (slash) {
-		    *slash = '/';
-		    strcat(buf,slash);
-		}
-		strcpy(path,buf);
-		if (*path == '/') result[1] = 0;
-		pos = strchr(result,0);
-		continue;
-	    }
-	    pos = strchr(result,0);
-	}
-	if (slash) {
-	    *pos++ = '/';
-	    path = slash+1;
-	}
-	*pos = 0;
-	if (!slash) break;
-    }
-    return 0;
-}
-
-
-char *realpath(const char *path,char *resolved_path)
-{
-    char cwd[PATH_MAX];
-    char *path_copy;
-    int res;
-
-    if (!*path) {
-	errno = ENOENT; /* SUSv2 */
-	return NULL;
-    }
-    if (!getcwd(cwd,sizeof(cwd))) return NULL;
-    strcpy(resolved_path,"/");
-    if (resolve_path(cwd,resolved_path,resolved_path)) return NULL;
-    strcat(resolved_path,"/");
-    path_copy = strdup(path);
-    if (!path_copy) return NULL;
-    res = resolve_path(path_copy,resolved_path,strchr(resolved_path,0));
-    free(path_copy);
-    if (res) return NULL;
-    return resolved_path;
-}
diff --git a/newlib/libc/sys/linux/rename.c b/newlib/libc/sys/linux/rename.c
deleted file mode 100644
index d6bf4598e..000000000
--- a/newlib/libc/sys/linux/rename.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* libc/sys/linux/rename.c - rename a file */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <stdio.h>
-#include <machine/syscall.h>
-
-_syscall2(int,rename,const char *,old,const char *,new)
-
diff --git a/newlib/libc/sys/linux/resource.c b/newlib/libc/sys/linux/resource.c
deleted file mode 100644
index 54a049da9..000000000
--- a/newlib/libc/sys/linux/resource.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* libc/sys/linux/resource.c - Process resource functions */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <sys/resource.h>
-#include <machine/syscall.h>
-
-_syscall2(int,getrusage,int,who,struct rusage *,r_usage)
-_syscall2(int,getrlimit,int,resource,struct rlimit *,rlp)
-
-weak_alias(__libc_getrlimit,__getrlimit)
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 2
-_syscall2(int,setrlimit,int,resource,const struct rlimit *,rlp)
-weak_alias(__libc_setrlimit,__setrlimit)
-#endif
-
diff --git a/newlib/libc/sys/linux/scandir64.c b/newlib/libc/sys/linux/scandir64.c
deleted file mode 100644
index b21b42342..000000000
--- a/newlib/libc/sys/linux/scandir64.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)scandir.c	5.10 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Scan the directory dirname calling select to make a list of selected
- * directory entries then sort using qsort and compare routine dcomp.
- * Returns the number of entries and a pointer to a list of pointers to
- * struct dirent64 (through namelist). Returns -1 if there were any errors.
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/lock.h>
-
-extern struct dirent64 *__readdir64 (DIR *);
-
-/*
- * The DIRSIZ macro gives the minimum record length which will hold
- * the directory entry.  This requires the amount of space in struct dirent64
- * without the d_name field, plus enough space for the name with a terminating
- * null byte (dp->d_namlen+1), rounded up to a 4 byte boundary.
- */
-#undef DIRSIZ
-#ifdef _DIRENT_HAVE_D_NAMLEN
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent64) - (MAXNAMLEN+1)) + (((dp)->d_namlen+1 + 3) &~ 3))
-#else
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent64) - (MAXNAMLEN+1)) + ((strlen((dp)->d_name)+1 + 3) &~ 3))
-#endif
-
-#ifndef __P
-#define __P(args) ()
-#endif
-
-int
-scandir64(dirname, namelist, select, dcomp)
-	const char *dirname;
-	struct dirent64 ***namelist;
-	int (*select) __P((struct dirent64 *));
-	int (*dcomp) __P((const void *, const void *));
-{
-	register struct dirent64 *d, *p, **names;
-	register size_t nitems;
-	struct stat64 stb;
-	long arraysz;
-	DIR *dirp;
-
-	if ((dirp = opendir(dirname)) == NULL)
-		return(-1);
-#ifdef HAVE_DD_LOCK
-	__lock_acquire_recursive(dirp->dd_lock);
-#endif
-	if (fstat64(dirp->dd_fd, &stb) < 0) {
-#ifdef HAVE_DD_LOCK
-		__lock_release_recursive(dirp->dd_lock);
-#endif
-		return(-1);
-	}
-
-	/*
-	 * estimate the array size by taking the size of the directory file
-	 * and dividing it by a multiple of the minimum size entry. 
-	 */
-	arraysz = (stb.st_size / 24);
-	names = (struct dirent64 **)malloc(arraysz * sizeof(struct dirent64 *));
-	if (names == NULL) {
-#ifdef HAVE_DD_LOCK
-		__lock_release_recursive(dirp->dd_lock);
-#endif
-		return(-1);
-	}
-
-	nitems = 0;
-	while ((d = __readdir64(dirp)) != NULL) {
-		if (select != NULL && !(*select)(d))
-			continue;	/* just selected names */
-		/*
-		 * Make a minimum size copy of the data
-		 */
-		p = (struct dirent64 *)malloc(DIRSIZ(d));
-		if (p == NULL) {
-#ifdef HAVE_DD_LOCK
-			__lock_release_recursive(dirp->dd_lock);
-#endif
-			return(-1);
-		}
-		p->d_ino = d->d_ino;
-		p->d_reclen = d->d_reclen;
-#ifdef _DIRENT_HAVE_D_NAMLEN
-		p->d_namlen = d->d_namlen;
-		bcopy(d->d_name, p->d_name, p->d_namlen + 1);
-#else
-               strcpy(p->d_name, d->d_name);
-#endif
-		/*
-		 * Check to make sure the array has space left and
-		 * realloc the maximum size.
-		 */
-		if (++nitems >= arraysz) {
-			if (fstat64(dirp->dd_fd, &stb) < 0) {
-#ifdef HAVE_DD_LOCK
-				__lock_release_recursive(dirp->dd_lock);
-#endif
-				return(-1);	/* just might have grown */
-			}
-			arraysz = stb.st_size / 12;
-			names = (struct dirent64 **)realloc((char *)names,
-				arraysz * sizeof(struct dirent64 *));
-			if (names == NULL) {
-#ifdef HAVE_DD_LOCK
-				__lock_release_recursive(dirp->dd_lock);
-#endif
-				return(-1);
-			}
-		}
-		names[nitems-1] = p;
-	}
-	closedir(dirp);
-	if (nitems && dcomp != NULL)
-		qsort(names, nitems, sizeof(struct dirent64 *), dcomp);
-	*namelist = names;
-#ifdef HAVE_DD_LOCK
-	__lock_release_recursive(dirp->dd_lock);
-#endif
-	return(nitems);
-}
-
-/*
- * Alphabetic order comparison routine for those who want it.
- */
-int
-alphasort64(d1, d2)
-       const struct dirent64 **d1;
-       const struct dirent64 **d2;
-{
-       return(strcmp((*d1)->d_name, (*d2)->d_name));
-}
-
diff --git a/newlib/libc/sys/linux/sched.c b/newlib/libc/sys/linux/sched.c
deleted file mode 100644
index 031b1b553..000000000
--- a/newlib/libc/sys/linux/sched.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* libc/sys/linux/sched.c - Process scheduling functions */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <time.h>
-#include <sched.h>
-#include <machine/syscall.h>
-
-_syscall1(int,sched_get_priority_max,int,policy);
-_syscall1(int,sched_get_priority_min,int,policy);
-_syscall2(int,sched_rr_get_interval,pid_t,pid,struct timespec *,interval);
-_syscall0(int,sched_yield);
-
-weak_alias(__libc_sched_get_priority_max,__sched_get_priority_max);
-weak_alias(__libc_sched_get_priority_min,__sched_get_priority_min);
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 3
-_syscall2(int,sched_getparam,pid_t,pid,struct sched_param *,sched);
-_syscall1(int,sched_getscheduler,pid_t,pid);
-_syscall2(int,sched_setparam,pid_t,pid,const struct sched_param *,sched);
-_syscall3(int,sched_setscheduler,pid_t,pid,int,policy,const struct sched_param *,sched);
-weak_alias(__libc_sched_getparam,__sched_getparam);
-weak_alias(__libc_sched_getscheduler,__sched_getscheduler);
-weak_alias(__libc_sched_setscheduler,__sched_setscheduler);
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 3 */
-
diff --git a/newlib/libc/sys/linux/select.c b/newlib/libc/sys/linux/select.c
deleted file mode 100644
index 882f54167..000000000
--- a/newlib/libc/sys/linux/select.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* libc/sys/linux/select.c - The select system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <machine/syscall.h>
-
-
-static _syscall5(int,_newselect,int,n,fd_set *,readfds,fd_set *,writefds,fd_set *,exceptfds,struct timeval *,timeout)
-
-int select (int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds,
-            struct timeval *timeout)
-{
-  return _newselect(n, readfds, writefds, exceptfds, timeout);
-}
diff --git a/newlib/libc/sys/linux/seteuid.c b/newlib/libc/sys/linux/seteuid.c
deleted file mode 100644
index c3fa384fd..000000000
--- a/newlib/libc/sys/linux/seteuid.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Copyright 2002, Red Hat Inc. */
-
-#include <errno.h>
-#include <unistd.h>
-
-int
-seteuid (uid_t uid)
-{
-	int result;
-
-	if (uid == (uid_t) ~0)
-	{
-		errno = (EINVAL);
-		return -1;
-	}
-
-	return setresuid (-1, uid, -1);
-}
diff --git a/newlib/libc/sys/linux/sethostid.c b/newlib/libc/sys/linux/sethostid.c
deleted file mode 100644
index eb71b74a1..000000000
--- a/newlib/libc/sys/linux/sethostid.c
+++ /dev/null
@@ -1,2 +0,0 @@
-#define SET_PROCEDURE 1
-#include "gethostid.c"
diff --git a/newlib/libc/sys/linux/sethostname.c b/newlib/libc/sys/linux/sethostname.c
deleted file mode 100644
index 669df3d74..000000000
--- a/newlib/libc/sys/linux/sethostname.c
+++ /dev/null
@@ -1,8 +0,0 @@
-/* libc/sys/linux/sethostname.c - Set host name */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <unistd.h>
-#include <machine/syscall.h>
-
-_syscall2(int,sethostname,const char *,name,size_t,len);
diff --git a/newlib/libc/sys/linux/setrlimit64.c b/newlib/libc/sys/linux/setrlimit64.c
deleted file mode 100644
index d4b4bfce0..000000000
--- a/newlib/libc/sys/linux/setrlimit64.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (C) 1991,1995,1996,1997,1998,2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/resource.h>
-#include <sys/types.h>
-
-/* Set the soft and hard limits for RESOURCE to *RLIMITS.
-   Only the super-user can increase hard limits.
-   Return 0 if successful, -1 if not (and sets errno).  */
-int
-setrlimit64 (resource, rlimits)
-     enum __rlimit_resource resource;
-     const struct rlimit64 *rlimits;
-{
-  struct rlimit rlimits32;
-
-  if (rlimits->rlim_cur >= RLIM_INFINITY)
-    rlimits32.rlim_cur = RLIM_INFINITY;
-  else
-    rlimits32.rlim_cur = rlimits->rlim_cur;
-  if (rlimits->rlim_max >= RLIM_INFINITY)
-    rlimits32.rlim_max = RLIM_INFINITY;
-  else
-    rlimits32.rlim_max = rlimits->rlim_max;
-
-  return __setrlimit (resource, &rlimits32);
-}
diff --git a/newlib/libc/sys/linux/shared.ld b/newlib/libc/sys/linux/shared.ld
deleted file mode 100644
index 6486f5920..000000000
--- a/newlib/libc/sys/linux/shared.ld
+++ /dev/null
@@ -1,7 +0,0 @@
-VERS_1.10 {
-	global: *;
-};
-
-VERS_1.11 {
-	global: *;
-};
diff --git a/newlib/libc/sys/linux/shm_open.c b/newlib/libc/sys/linux/shm_open.c
deleted file mode 100644
index cb92c3ae4..000000000
--- a/newlib/libc/sys/linux/shm_open.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* shm_open - open a shared memory file */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <string.h>
-#include <fcntl.h>
-#include <limits.h>
-
-int
-shm_open (const char *name, int oflag, mode_t mode)
-{
-  int fd;
-  char shm_name[PATH_MAX+20] = "/dev/shm/";
-
-  /* skip opening slash */
-  if (*name == '/')
-    ++name;
-
-  /* create special shared memory file name and leave enough space to
-     cause a path/name error if name is too long */
-  strlcpy (shm_name + 9, name, PATH_MAX + 10);
-
-  fd = open (shm_name, oflag, mode);
-
-  if (fd != -1)
-    {
-      /* once open we must add FD_CLOEXEC flag to file descriptor */
-      int flags = fcntl (fd, F_GETFD, 0);
-
-      if (flags >= 0)
-        {
-          flags |= FD_CLOEXEC;
-          flags = fcntl (fd, F_SETFD, flags);
-        }
-
-      /* on failure, just close file and give up */
-      if (flags == -1)
-        {
-          close (fd);
-          fd = -1;
-        }
-    }
-
-  return fd;
-}
diff --git a/newlib/libc/sys/linux/shm_unlink.c b/newlib/libc/sys/linux/shm_unlink.c
deleted file mode 100644
index cf259c627..000000000
--- a/newlib/libc/sys/linux/shm_unlink.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* shm_unlink - remove a shared memory file */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <string.h>
-#include <limits.h>
-
-int
-shm_unlink (const char *name)
-{
-  int rc;
-  char shm_name[PATH_MAX+20] = "/dev/shm/";
-
-  /* skip opening slash */
-  if (*name == '/')
-    ++name;
-
-  /* create special shared memory file name and leave enough space to
-     cause a path/name error if name is too long */
-  strlcpy (shm_name + 9, name, PATH_MAX + 10);
-
-  rc = unlink (shm_name);
-
-  return rc;
-}
diff --git a/newlib/libc/sys/linux/sig.c b/newlib/libc/sys/linux/sig.c
deleted file mode 100644
index 6e22873ee..000000000
--- a/newlib/libc/sys/linux/sig.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* libc/sys/linux/signal.c - Signal handling functions */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <signal.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <machine/syscall.h>
-
-/* avoid name space pollution */
-#define __NR___sgetmask __NR_sgetmask
-#define __NR___ssetmask __NR_ssetmask
-#define __NR___rt_sigtimedwait __NR_rt_sigtimedwait
-#define __NR___rt_sigpending __NR_rt_sigpending
-#define __NR___rt_sigprocmask __NR_rt_sigprocmask
-#define __NR___rt_sigsuspend __NR_rt_sigsuspend
-
-_syscall2(int,kill,pid_t,pid,int,sig)
-_syscall2(__sighandler_t,signal,int,signum,__sighandler_t,handler)
-_syscall0(int,pause)
-_syscall1(unsigned int,alarm,unsigned int,seconds)
-
-static _syscall2(int,__rt_sigpending,sigset_t *,set,size_t,size)
-static _syscall4(int,__rt_sigprocmask,int,how,const sigset_t *,set,sigset_t *,oldset,size_t,size)
-static _syscall2(int,__rt_sigsuspend,const sigset_t *,mask,size_t,size)
-static _syscall4(int,__rt_sigtimedwait,const sigset_t *,set,siginfo_t *,info,struct timespec *,timeout,size_t,size)
-
-int __sigsuspend (const sigset_t *mask)
-{
-    return __rt_sigsuspend(mask, NSIG/8);
-}
-weak_alias(__sigsuspend,sigsuspend)
-
-int sigmask(int signum) /* BSD */
-{
-    return 1 << signum;
-}
-
-int __libc_raise(int sig)
-{
-    return kill(getpid(),sig);
-}
-weak_alias(__libc_raise,raise)
-
-int __sigpending(sigset_t *set)
-{
-  return __rt_sigpending(set, NSIG/8);
-}
-weak_alias(__sigpending,sigpending)
-
-int __sigprocmask (int how,const sigset_t *set,sigset_t *oldset)
-{
-  return __rt_sigprocmask(how, set, oldset, NSIG/8);
-}
-weak_alias(__sigprocmask,sigprocmask)
-
-int sigtimedwait(const sigset_t *set, siginfo_t *info,
-                 struct timespec *timeout)
-{
-  return __rt_sigtimedwait(set, info, timeout, NSIG/8);
-}
-
-int sigwaitinfo(const sigset_t *set, siginfo_t *info)
-{
-  return __rt_sigtimedwait(set, info, NULL, NSIG/8);
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-
-static _syscall1(int,__ssetmask,int,newmask)
-static _syscall0(int,__sgetmask)
-
-int sigblock(int mask) /* BSD */
-{
-    return __ssetmask(mask | __sgetmask());
-}
-
-int sigsetmask(int newmask) /* BSD */
-{
-    return __ssetmask(newmask);
-}
-#endif
-
-const char *const sys_siglist[] = {
-#include "siglist.inc"
-};
diff --git a/newlib/libc/sys/linux/sigaction.c b/newlib/libc/sys/linux/sigaction.c
deleted file mode 100644
index 6ee3fa2cb..000000000
--- a/newlib/libc/sys/linux/sigaction.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified 05/30/02 by Jeff Johnston, Red Hat Inc. */
-
-#include <errno.h>
-#include <signal.h>
-#include <string.h>
-
-#include <machine/syscall.h>
-
-/* The difference here is that the sigaction structure used in the
-   kernel is not the same as we use in the libc.  Therefore we must
-   translate it here.  */
-#include <kernel_sigaction.h>
-
-#define __NR___rt_sigaction __NR_rt_sigaction
-
-static _syscall4(int,__rt_sigaction,int,sig,
-                 const struct kernel_sigaction *,act,
-                 struct kernel_sigaction *,oact,size_t,size);
-
-/* If ACT is not NULL, change the action for SIG to *ACT.
-   If OACT is not NULL, put the old action for SIG in *OACT.  */
-int
-__libc_sigaction (sig, act, oact)
-     int sig;
-     const struct sigaction *act;
-     struct sigaction *oact;
-{
-  int result;
-  struct kernel_sigaction kact, koact;
-  /* Save the current error value for later.  We need not do this
-     if we are guaranteed to have realtime signals.  */
-
-  if (act)
-    {
-      kact.k_sa_handler = act->sa_handler;
-      memcpy (&kact.sa_mask, &act->sa_mask, sizeof (sigset_t));
-      kact.sa_flags = act->sa_flags;
-      kact.sa_restorer = act->sa_restorer;
-    }
-
-  /* XXX The size argument hopefully will have to be changed to the
-     real size of the user-level sigset_t.  */
-  result = __rt_sigaction (sig,
-	       act ? (&kact) : NULL,
-	       oact ? (&koact) : NULL, NSIG / 8);
-
-  if (oact && result >= 0)
-    {
-      oact->sa_handler = koact.k_sa_handler;
-      memcpy (&oact->sa_mask, &koact.sa_mask, sizeof (sigset_t));
-      oact->sa_flags = koact.sa_flags;
-      oact->sa_restorer = koact.sa_restorer;
-    }
-
-  return result;
-}
-
-weak_alias (__libc_sigaction, __sigaction)
-weak_alias (__libc_sigaction, sigaction)
diff --git a/newlib/libc/sys/linux/siglongjmp.c b/newlib/libc/sys/linux/siglongjmp.c
deleted file mode 100644
index bc3c5b79e..000000000
--- a/newlib/libc/sys/linux/siglongjmp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* libc/sys/linux/siglongjmp.c - siglongjmp function */
-
-/* Copyright 2002, Red Hat Inc. */
-
-
-#include <setjmp.h>
-#include <signal.h>
-#include <machine/weakalias.h>
-
-void
-__libc_siglongjmp (sigjmp_buf env, int val)
-{
-  if (env.__is_mask_saved)
-    sigprocmask (SIG_SETMASK, &env.__saved_mask, NULL);
-
-  __libc_longjmp (env.__buf, val);
-}
-weak_alias(__libc_siglongjmp,siglongjmp);
diff --git a/newlib/libc/sys/linux/signal.c b/newlib/libc/sys/linux/signal.c
deleted file mode 100644
index b43cd778c..000000000
--- a/newlib/libc/sys/linux/signal.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* BSD-like signal function.
-   Copyright (C) 1991, 1992, 1996, 1997, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <signal.h>
-#include <machine/weakalias.h>
-
-sigset_t _sigintr;		/* Set by siginterrupt.  */
-
-/* Set the handler for the signal SIG to HANDLER,
-   returning the old handler, or SIG_ERR on error.  */
-__sighandler_t
-__bsd_signal (sig, handler)
-     int sig;
-     __sighandler_t handler;
-{
-  struct sigaction act, oact;
-
-  /* Check signal extents to protect __sigismember.  */
-  if (handler == SIG_ERR || sig < 1 || sig >= NSIG)
-    {
-      errno = (EINVAL);
-      return SIG_ERR;
-    }
-
-  act.sa_handler = handler;
-  if (sigemptyset (&act.sa_mask) < 0
-      || sigaddset (&act.sa_mask, sig) < 0)
-    return SIG_ERR;
-  act.sa_flags = sigismember (&_sigintr, sig) ? 0 : SA_RESTART;
-  if (sigaction (sig, &act, &oact) < 0)
-    return SIG_ERR;
-
-  return oact.sa_handler;
-}
-weak_alias (__bsd_signal, bsd_signal)
-weak_alias (__bsd_signal, signal)
-weak_alias (__bsd_signal, ssignal)
diff --git a/newlib/libc/sys/linux/sigqueue.c b/newlib/libc/sys/linux/sigqueue.c
deleted file mode 100644
index 60c4fed20..000000000
--- a/newlib/libc/sys/linux/sigqueue.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Copyright (C) 1997, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib by Jeff Johnston, May 30, 2002 */
-
-#include <errno.h>
-#include <signal.h>
-#include <unistd.h>
-#include <string.h>
-
-#include <machine/syscall.h>
-
-#define __NR___rt_sigqueueinfo __NR_rt_sigqueueinfo
-
-extern uid_t __getuid();
-extern pid_t __getpid();
-
-static _syscall3(int,__rt_sigqueueinfo,int,pid,int,sig,siginfo_t *,info)
-
-/* Return any pending signal or wait for one for the given time.  */
-int
-__sigqueue (pid, sig, val)
-     pid_t pid;
-     int sig;
-     const union sigval val;
-{
-  siginfo_t info;
-
-  /* First, clear the siginfo_t structure, so that we don't pass our
-     stack content to other tasks.  */
-  memset (&info, 0, sizeof (siginfo_t));
-  /* We must pass the information about the data in a siginfo_t value.  */
-  info.si_signo = sig;
-  info.si_code = SI_QUEUE;
-  info.si_pid = __getpid ();
-  info.si_uid = __getuid ();
-  info.si_value = val;
-
-  return __rt_sigqueueinfo(pid, sig, &info);
-}
-weak_alias (__sigqueue, sigqueue)
diff --git a/newlib/libc/sys/linux/sigset.c b/newlib/libc/sys/linux/sigset.c
deleted file mode 100644
index b6f2d79e5..000000000
--- a/newlib/libc/sys/linux/sigset.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* sigset.c - signal set manipulation functions */
-
-/* Copyright 2002, Red Hat Inc. */
-
-/* Note: these are currently grouped together in one file so that
-         it will override the default version in the libc/unix 
-         directory which has grouped all functions in one file. */
-
-/* sigaddset function */
-
-#include <signal.h>
-#include <bits/sigset.h>
-#include <errno.h>
-#include <string.h>
-#include <machine/weakalias.h>
-
-int
-sigaddset (sigset_t *set, const int signo)
-{
-  int index, mask;
-  __sigset_t *st = (__sigset_t *)set;
-
-  if (signo > NSIG)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  index = (signo - 1) / (8 * sizeof(long));
-  mask = 1 << ((signo - 1) % (8 * sizeof(long)));
-
-  st->__val[index] |= mask;
-  return 0;
-}
-
-/* sigdelset function */
-
-int
-sigdelset (sigset_t *set, const int signo)
-{
-  int index, mask;
-  __sigset_t *st = (__sigset_t *)set;
-
-  if (signo > NSIG)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  index = (signo - 1) / (8 * sizeof(long));
-  mask = 1 << ((signo - 1) % (8 * sizeof(long)));
-
-  st->__val[index] &= ~mask;
-  return 0;
-}
-
-/* sigemptyset function */
-
-int
-sigemptyset (sigset_t *set)
-{
-  int size = NSIG / 8;
-  __sigset_t *st = (__sigset_t *)set;
-  memset (st->__val, 0, size);
-  return 0;
-}
-
-/* sigfillset function */
-
-int
-sigfillset (sigset_t *set)
-{
-  int size = NSIG / 8;
-  __sigset_t *st = (__sigset_t *)set;
-  memset (st->__val, 0xff, size);
-  return 0;
-}
-
-/* sigismember function */
-
-int
-sigismember (const sigset_t *set, int signo)
-{
-  int index, mask;
-  __sigset_t *st = (__sigset_t *)set;
-
-  if (signo > NSIG)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  index = (signo - 1) / (8 * sizeof(long));
-  mask = 1 << ((signo - 1) % (8 * sizeof(long)));
-
-  return (st->__val[index] & mask) != 0;
-}
-
diff --git a/newlib/libc/sys/linux/sigwait.c b/newlib/libc/sys/linux/sigwait.c
deleted file mode 100644
index 09a4190e7..000000000
--- a/newlib/libc/sys/linux/sigwait.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Implementation of sigwait function from POSIX.1c.
-   Copyright (C) 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <signal.h>
-#include <stddef.h>		/* For NULL.  */
-
-#include <machine/weakalias.h>
-
-/* This is our dummy signal handler we use here.  */
-static void ignore_signal (int sig);
-
-/* Place where to remember which signal we got.  Please note that this
-   implementation cannot be used for the threaded libc.  The
-   libpthread must provide an own version.  */
-static int was_sig;
-
-
-int
-__sigwait (const sigset_t *set, int *sig)
-{
-  sigset_t tmp_mask;
-  struct sigaction saved[NSIG];
-  struct sigaction action;
-  int save_errno;
-  int this;
-
-  /* Prepare set.  */
-  sigfillset (&tmp_mask);
-
-  /* Unblock all signals in the SET and register our nice handler.  */
-  action.sa_handler = ignore_signal;
-  action.sa_flags = 0;
-  sigfillset (&action.sa_mask);	/* Block all signals for handler.  */
-
-  /* Make sure we recognize error conditions by setting WAS_SIG to a
-     value which does not describe a legal signal number.  */
-  was_sig = -1;
-
-  for (this = 1; this < NSIG; ++this)
-    if (sigismember (set, this))
-      {
-	/* Unblock this signal.  */
-	sigdelset (&tmp_mask, this);
-
-	/* Register temporary action handler.  */
-	if (__sigaction (this, &action, &saved[this]) != 0)
-	  goto restore_handler;
-      }
-
-  /* Now we can wait for signals.  */
-  __sigsuspend (&tmp_mask);
-
- restore_handler:
-  save_errno = errno;
-
-  while (--this >= 1)
-    if (sigismember (set, this))
-      /* We ignore errors here since we must restore all handlers.  */
-      __sigaction (this, &saved[this], NULL);
-
-  errno = (save_errno);
-
-  /* Store the result and return.  */
-  *sig = was_sig;
-  return was_sig == -1 ? -1 : 0;
-}
-weak_alias (__sigwait, sigwait)
-
-
-static void
-ignore_signal (int sig)
-{
-  /* Remember the signal.  */
-  was_sig = sig;
-}
diff --git a/newlib/libc/sys/linux/sleep.c b/newlib/libc/sys/linux/sleep.c
deleted file mode 100644
index 7cc2bede6..000000000
--- a/newlib/libc/sys/linux/sleep.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* libc/sys/linux/sleep.c - sleep function */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <linux/times.h>
-
-unsigned int sleep(unsigned int seconds)
-{
-    struct timespec ts;
-
-    ts.tv_sec = seconds;
-    ts.tv_nsec = 0;
-    if (!nanosleep(&ts,&ts)) return 0;
-    if (errno == EINTR) return ts.tv_sec;
-    return -1;
-}
diff --git a/newlib/libc/sys/linux/socket.c b/newlib/libc/sys/linux/socket.c
deleted file mode 100644
index daba98934..000000000
--- a/newlib/libc/sys/linux/socket.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* libc/sys/linux/socket.c - socket system calls */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#define __KERNEL_PROTOTYPES
-
-#include <stdarg.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <machine/socketcall.h>
-
-_sockcall3(int,accept,int,fd,struct sockaddr *,addr,socklen_t *,addr_len)
-_sockcall3(int,bind,int,fd,const struct sockaddr *,addr,socklen_t,len)
-_sockcall3(int,connect,int,fd,const struct sockaddr *,addr,socklen_t,len)
-_sockcall3(int,getpeername,int,fd,struct sockaddr *,addr,socklen_t *,len)
-_sockcall3(int,getsockname,int,fd,struct sockaddr *,addr,socklen_t *,len)
-_sockcall5(int,getsockopt,int,fd,int,level,int,opt,void *,optval,socklen_t *,optlen)
-_sockcall2(int,listen,int,fd,int,n)
-_sockcall4(ssize_t,recv,int,fd,void *,buf,size_t,n,int,flags)
-_sockcall6(ssize_t,recvfrom,int,fd,void *,buf,size_t,n,int,flags,struct sockaddr *,addr,socklen_t *,addr_len)
-_sockcall3(ssize_t,recvmsg,int,fd,struct msghdr *,message,int,flags)
-_sockcall4(ssize_t,send,int,fd,const void *,buf,size_t,n,int,flags)
-_sockcall6(ssize_t,sendto,int,fd,const void *,buf,size_t,n,int,flags,const struct sockaddr *,addr,socklen_t,addr_len)
-_sockcall5(int,setsockopt,int,fd,int,level,int,opt,const void *,optval,socklen_t,optlen)
-_sockcall2(int,shutdown,int,fd,int,how)
-_sockcall3(int,socket,int,domain,int,type,int,protocol)
-_sockcall4(int,socketpair,int,domain,int,type,int,protocol,int,fds[2])
-_sockcall3(ssize_t,sendmsg,int,fd,const struct msghdr *,message,int,flags)
-
-weak_alias(__libc_connect,__connect);
-weak_alias(__libc_send,__send);
diff --git a/newlib/libc/sys/linux/sockops.h b/newlib/libc/sys/linux/sockops.h
deleted file mode 100644
index 7a421f26d..000000000
--- a/newlib/libc/sys/linux/sockops.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Linux socket syscall subopcodes */
-
-#ifndef _SOCKOPS_H
-
-#define _SOCKOPS_H
-
-#define SOCK_socket           1
-#define SOCK_bind             2
-#define SOCK_connect          3
-#define SOCK_listen           4
-#define SOCK_accept           5
-#define SOCK_getsockname      6
-#define SOCK_getpeername      7
-#define SOCK_socketpair       8
-#define SOCK_send             9
-#define SOCK_recv             10
-#define SOCK_sendto           11
-#define SOCK_recvfrom         12
-#define SOCK_shutdown         13
-#define SOCK_setsockopt       14
-#define SOCK_getsockopt       15
-#define SOCK_sendmsg          16
-#define SOCK_recvmsg          17
-
-#endif /* _SOCKOPS_H */
-
-
diff --git a/newlib/libc/sys/linux/stack.c b/newlib/libc/sys/linux/stack.c
deleted file mode 100644
index 52a181cf2..000000000
--- a/newlib/libc/sys/linux/stack.c
+++ /dev/null
@@ -1,10 +0,0 @@
-/* libc/sys/linux/stack.c - Basic stack system calls */
-
-/* Copyright 2002, Red Hat Inc. */
-
-#include <signal.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <machine/syscall.h>
-
-_syscall2(int,sigaltstack,const stack_t *,ss,stack_t *,oss)
diff --git a/newlib/libc/sys/linux/statvfs.c b/newlib/libc/sys/linux/statvfs.c
deleted file mode 100644
index 4b0d51abd..000000000
--- a/newlib/libc/sys/linux/statvfs.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#define _GNU_SOURCE
-
-#include <errno.h>
-#include <mntent.h>
-#include <paths.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
-#include <sys/statvfs.h>
-
-
-int
-statvfs (const char *file, struct statvfs *buf)
-{
-  struct statfs fsbuf;
-  struct stat64 st;
-
-  /* Get as much information as possible from the system.  */
-  if (__statfs (file, &fsbuf) < 0)
-    return -1;
-
-#define STAT(st) stat64 (file, st)
-#include "internal_statvfs.c"
-
-  /* We signal success if the statfs call succeeded.  */
-  return 0;
-}
diff --git a/newlib/libc/sys/linux/statvfs64.c b/newlib/libc/sys/linux/statvfs64.c
deleted file mode 100644
index f612b991d..000000000
--- a/newlib/libc/sys/linux/statvfs64.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Return information about the filesystem on which FILE resides.
-   Copyright (C) 1998, 2000, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/statvfs.h>
-#include <stddef.h>
-#include <string.h>
-#include <machine/weakalias.h>
-
-/* Return information about the filesystem on which FILE resides.  */
-int
-__statvfs64 (const char *file, struct statvfs64 *buf)
-{
-  struct statvfs buf32;
-
-  if (statvfs (file, &buf32) < 0)
-    return -1;
-
-  buf->f_bsize = buf32.f_bsize;
-  buf->f_frsize = buf32.f_frsize;
-  buf->f_blocks = buf32.f_blocks;
-  buf->f_bfree = buf32.f_bfree;
-  buf->f_bavail = buf32.f_bavail;
-  buf->f_files = buf32.f_files;
-  buf->f_ffree = buf32.f_ffree;
-  buf->f_favail = buf32.f_favail;
-  buf->f_fsid = buf32.f_fsid;
-  buf->f_flag = buf32.f_flag;
-  buf->f_namemax = buf32.f_namemax;
-  memcpy (buf->__f_spare, buf32.__f_spare, sizeof (buf32.__f_spare));
-
-  return 0;
-}
-weak_alias (__statvfs64, statvfs64)
diff --git a/newlib/libc/sys/linux/stdlib/COPYRIGHT b/newlib/libc/sys/linux/stdlib/COPYRIGHT
deleted file mode 100644
index 574f6bcec..000000000
--- a/newlib/libc/sys/linux/stdlib/COPYRIGHT
+++ /dev/null
@@ -1,56 +0,0 @@
-Copyright 1992, 1993, 1994 Henry Spencer.  All rights reserved.
-This software is not subject to any license of the American Telephone
-and Telegraph Company or of the Regents of the University of California.
-
-Permission is granted to anyone to use this software for any purpose on
-any computer system, and to alter it and redistribute it, subject
-to the following restrictions:
-
-1. The author is not responsible for the consequences of use of this
-   software, no matter how awful, even if they arise from flaws in it.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.  Since few users ever read sources,
-   credits must appear in the documentation.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.  Since few users
-   ever read sources, credits must appear in the documentation.
-
-4. This notice may not be removed or altered.
-
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-/*-
- * Copyright (c) 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)COPYRIGHT	8.1 (Berkeley) 3/16/94
- */
diff --git a/newlib/libc/sys/linux/stdlib/Makefile.am b/newlib/libc/sys/linux/stdlib/Makefile.am
deleted file mode 100644
index 2df19ede7..000000000
--- a/newlib/libc/sys/linux/stdlib/Makefile.am
+++ /dev/null
@@ -1,44 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	fnmatch.c glob.c regcomp.c regerror.c regex2.h \
-	regexec.c regfree.c collate.h collate.c collcmp.c \
-	reallocf.c
-
-ELIX_3_OBJS = \
-	wordexp.$(oext) \
-	wordfree.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS =
-else
-LIB_OBJS = $(ELIX_3_OBJS)
-endif
-endif
-
-libstdlib_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libstdlib.la
-libstdlib_la_SOURCES = $(GENERAL_SOURCES)
-libstdlib_la_LIBADD = $(LIB_OBJS) 
-libstdlib_la_DEPENDENCIES = $(LIB_OBJS) 
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS) 
-lib_a_DEPENDENCIES = $(LIB_OBJS) 
-noinst_DATA =
-endif # USE_LIBTOOL
-
-AM_CFLAGS = -D_GNU_SOURCE
-
-include $(srcdir)/../../../../Makefile.shared
diff --git a/newlib/libc/sys/linux/stdlib/Makefile.in b/newlib/libc/sys/linux/stdlib/Makefile.in
deleted file mode 100644
index 09b39ab1f..000000000
--- a/newlib/libc/sys/linux/stdlib/Makefile.in
+++ /dev/null
@@ -1,380 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LINUX_MACH_LIB = @LINUX_MACH_LIB@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	fnmatch.c glob.c regcomp.c regerror.c regex2.h \
-	regexec.c regfree.c collate.h collate.c collcmp.c \
-	reallocf.c
-
-
-ELIX_3_OBJS = \
-	wordexp.$(oext) \
-	wordfree.$(oext)
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@$(ELIX_3_OBJS)
-
-libstdlib_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libstdlib.la
-@USE_LIBTOOL_TRUE@libstdlib_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libstdlib_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS) 
-@USE_LIBTOOL_TRUE@libstdlib_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS) 
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS) 
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS) 
-
-AM_CFLAGS = -D_GNU_SOURCE
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  fnmatch.$(OBJEXT) glob.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@regcomp.$(OBJEXT) regerror.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@regexec.$(OBJEXT) regfree.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@collate.$(OBJEXT) collcmp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@reallocf.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libstdlib_la_OBJECTS =  fnmatch.lo glob.lo regcomp.lo \
-@USE_LIBTOOL_TRUE@regerror.lo regexec.lo regfree.lo collate.lo \
-@USE_LIBTOOL_TRUE@collcmp.lo reallocf.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libstdlib_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libstdlib_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus stdlib/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libstdlib.la: $(libstdlib_la_OBJECTS) $(libstdlib_la_DEPENDENCIES)
-	$(LINK)  $(libstdlib_la_LDFLAGS) $(libstdlib_la_OBJECTS) $(libstdlib_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = stdlib
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/linux/stdlib/cclass.h b/newlib/libc/sys/linux/stdlib/cclass.h
deleted file mode 100644
index 956a655fa..000000000
--- a/newlib/libc/sys/linux/stdlib/cclass.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)cclass.h	8.3 (Berkeley) 3/20/94
- * $FreeBSD: src/lib/libc/regex/cclass.h,v 1.4 2002/03/22 23:41:56 obrien Exp $
- */
-
-
-typedef enum {CALNUM, CALPHA, CBLANK, CCNTRL, CDIGIT, CGRAPH,
-	      CLOWER, CPRINT, CPUNCT, CSPACE, CUPPER, CXDIGIT} citype;
-
-/* character-class table */
-static struct cclass {
-	char *name;
-	citype fidx;
-} cclasses[] = {
-	{"alnum",       CALNUM},
-	{"alpha",       CALPHA},
-	{"blank",       CBLANK},
-	{"cntrl",       CCNTRL},
-	{"digit",       CDIGIT},
-	{"graph",       CGRAPH},
-	{"lower",       CLOWER},
-	{"print",       CPRINT},
-	{"punct",       CPUNCT},
-	{"space",       CSPACE},
-	{"upper",       CUPPER},
-	{"xdigit",      CXDIGIT},
-	{NULL,          }
-};
diff --git a/newlib/libc/sys/linux/stdlib/cname.h b/newlib/libc/sys/linux/stdlib/cname.h
deleted file mode 100644
index 4f0d583d2..000000000
--- a/newlib/libc/sys/linux/stdlib/cname.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)cname.h	8.3 (Berkeley) 3/20/94
- * $FreeBSD: src/lib/libc/regex/cname.h,v 1.3 2002/03/22 23:41:56 obrien Exp $
- */
-
-/* character-name table */
-static struct cname {
-	char *name;
-	char code;
-} cnames[] = {
-	{"NUL",			'\0'},
-	{"SOH",			'\001'},
-	{"STX",			'\002'},
-	{"ETX",			'\003'},
-	{"EOT",			'\004'},
-	{"ENQ",			'\005'},
-	{"ACK",			'\006'},
-	{"BEL",			'\007'},
-	{"alert",		'\007'},
-	{"BS",			'\010'},
-	{"backspace",		'\b'},
-	{"HT",			'\011'},
-	{"tab",			'\t'},
-	{"LF",			'\012'},
-	{"newline",		'\n'},
-	{"VT",			'\013'},
-	{"vertical-tab",	'\v'},
-	{"FF",			'\014'},
-	{"form-feed",		'\f'},
-	{"CR",			'\015'},
-	{"carriage-return",	'\r'},
-	{"SO",			'\016'},
-	{"SI",			'\017'},
-	{"DLE",			'\020'},
-	{"DC1",			'\021'},
-	{"DC2",			'\022'},
-	{"DC3",			'\023'},
-	{"DC4",			'\024'},
-	{"NAK",			'\025'},
-	{"SYN",			'\026'},
-	{"ETB",			'\027'},
-	{"CAN",			'\030'},
-	{"EM",			'\031'},
-	{"SUB",			'\032'},
-	{"ESC",			'\033'},
-	{"IS4",			'\034'},
-	{"FS",			'\034'},
-	{"IS3",			'\035'},
-	{"GS",			'\035'},
-	{"IS2",			'\036'},
-	{"RS",			'\036'},
-	{"IS1",			'\037'},
-	{"US",			'\037'},
-	{"space",		' '},
-	{"exclamation-mark",	'!'},
-	{"quotation-mark",	'"'},
-	{"number-sign",		'#'},
-	{"dollar-sign",		'$'},
-	{"percent-sign",	'%'},
-	{"ampersand",		'&'},
-	{"apostrophe",		'\''},
-	{"left-parenthesis",	'('},
-	{"right-parenthesis",	')'},
-	{"asterisk",		'*'},
-	{"plus-sign",		'+'},
-	{"comma",		','},
-	{"hyphen",		'-'},
-	{"hyphen-minus",	'-'},
-	{"period",		'.'},
-	{"full-stop",		'.'},
-	{"slash",		'/'},
-	{"solidus",		'/'},
-	{"zero",		'0'},
-	{"one",			'1'},
-	{"two",			'2'},
-	{"three",		'3'},
-	{"four",		'4'},
-	{"five",		'5'},
-	{"six",			'6'},
-	{"seven",      		'7'},
-	{"eight",		'8'},
-	{"nine",		'9'},
-	{"colon",		':'},
-	{"semicolon",		';'},
-	{"less-than-sign",	'<'},
-	{"equals-sign",		'='},
-	{"greater-than-sign",	'>'},
-	{"question-mark",	'?'},
-	{"commercial-at",	'@'},
-	{"left-square-bracket",	'['},
-	{"backslash",		'\\'},
-	{"reverse-solidus",	'\\'},
-	{"right-square-bracket",']'},
-	{"circumflex",		'^'},
-	{"circumflex-accent",	'^'},
-	{"underscore",		'_'},
-	{"low-line",		'_'},
-	{"grave-accent",	'`'},
-	{"left-brace",		'{'},
-	{"left-curly-bracket",	'{'},
-	{"vertical-line",	'|'},
-	{"right-brace",		'}'},
-	{"right-curly-bracket",	'}'},
-	{"tilde",		'~'},
-	{"DEL",	'\177'},
-	{NULL,	0}
-};
diff --git a/newlib/libc/sys/linux/stdlib/collate.c b/newlib/libc/sys/linux/stdlib/collate.c
deleted file mode 100644
index 05ee9aba0..000000000
--- a/newlib/libc/sys/linux/stdlib/collate.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*-
- * Copyright (c) 1995 Alex Tatmanjants <alex@elvisti.kiev.ua>
- *		at Electronni Visti IA, Kiev, Ukraine.
- *			All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/locale/collate.c,v 1.24 2002/03/29 22:43:42 markm Exp $");
-
-#include "namespace.h"
-#include <rune.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <sysexits.h>
-#include "un-namespace.h"
-
-#include "collate.h"
-#include "setlocale.h"
-
-#include "libc_private.h"
-
-extern char *_PathLocale;
-int __collate_load_error = 1;
-int __collate_substitute_nontrivial;
-char __collate_version[STR_LEN];
-u_char __collate_substitute_table[UCHAR_MAX + 1][STR_LEN];
-struct __collate_st_char_pri __collate_char_pri_table[UCHAR_MAX + 1];
-struct __collate_st_chain_pri __collate_chain_pri_table[TABLE_SIZE];
-
-#define FREAD(a, b, c, d) \
-	do { \
-		if (fread(a, b, c, d) != c) { \
-			fclose(d); \
-			return -1; \
-		} \
-	} while(0)
-
-void __collate_err(int ex, const char *f);
-
-int
-__collate_load_tables(encoding)
-	char *encoding;
-{
-	char buf[PATH_MAX];
-	FILE *fp;
-	int i, save_load_error;
-
-	save_load_error = __collate_load_error;
-	__collate_load_error = 1;
-	if (!encoding) {
-		__collate_load_error = save_load_error;
-		return -1;
-	}
-	if (!strcmp(encoding, "C") || !strcmp(encoding, "POSIX"))
-		return 0;
-	if (!_PathLocale) {
-		__collate_load_error = save_load_error;
-		return -1;
-	}
-	/* Range checking not needed, encoding has fixed size */
-	(void) strcpy(buf, _PathLocale);
-	(void) strcat(buf, "/");
-	(void) strcat(buf, encoding);
-	(void) strcat(buf, "/LC_COLLATE");
-	if ((fp = fopen(buf, "r")) == NULL) {
-		__collate_load_error = save_load_error;
-		return -1;
-	}
-	FREAD(__collate_version, sizeof(__collate_version), 1, fp);
-	if (strcmp(__collate_version, COLLATE_VERSION) != 0) {
-		fclose(fp);
-		return -1;
-	}
-	FREAD(__collate_substitute_table, sizeof(__collate_substitute_table),
-	      1, fp);
-	FREAD(__collate_char_pri_table, sizeof(__collate_char_pri_table), 1,
-	      fp);
-	FREAD(__collate_chain_pri_table, sizeof(__collate_chain_pri_table), 1,
-	      fp);
-	fclose(fp);
-	__collate_load_error = 0;
-	
-	__collate_substitute_nontrivial = 0;
-	for (i = 0; i < UCHAR_MAX + 1; i++) {
-		if (__collate_substitute_table[i][0] != i ||
-		    __collate_substitute_table[i][1] != 0) {
-			__collate_substitute_nontrivial = 1;
-			break;
-		}
-	}
-
-	return 0;
-}
-
-u_char *
-__collate_substitute(s)
-	const u_char *s;
-{
-	int dest_len, len, nlen;
-	int delta = strlen(s);
-	u_char *dest_str = NULL;
-
-	if(s == NULL || *s == '\0')
-		return __collate_strdup("");
-	delta += delta / 8;
-	dest_str = malloc(dest_len = delta);
-	if(dest_str == NULL)
-		__collate_err(EX_OSERR, __FUNCTION__);
-	len = 0;
-	while(*s) {
-		nlen = len + strlen(__collate_substitute_table[*s]);
-		if (dest_len <= nlen) {
-			dest_str = reallocf(dest_str, dest_len = nlen + delta);
-			if(dest_str == NULL)
-				__collate_err(EX_OSERR, __FUNCTION__);
-		}
-		strcpy(dest_str + len, __collate_substitute_table[*s++]);
-		len = nlen;
-	}
-	return dest_str;
-}
-
-void
-__collate_lookup(t, len, prim, sec)
-	const u_char *t;
-	int *len, *prim, *sec;
-{
-	struct __collate_st_chain_pri *p2;
-
-	*len = 1;
-	*prim = *sec = 0;
-	for(p2 = __collate_chain_pri_table; p2->str[0]; p2++) {
-		if(strncmp(t, p2->str, strlen(p2->str)) == 0) {
-			*len = strlen(p2->str);
-			*prim = p2->prim;
-			*sec = p2->sec;
-			return;
-		}
-	}
-	*prim = __collate_char_pri_table[*t].prim;
-	*sec = __collate_char_pri_table[*t].sec;
-}
-
-u_char *
-__collate_strdup(s)
-	u_char *s;
-{
-	u_char *t = strdup(s);
-
-	if (t == NULL)
-		__collate_err(EX_OSERR, __FUNCTION__);
-	return t;
-}
-
-void
-__collate_err(int ex, const char *f)
-{
-	const char *s = strdup("collate_error");
-	int serrno = errno;
-
-	write(STDERR_FILENO, s, strlen(s));
-	write(STDERR_FILENO, ": ", 2);
-	free(s);
-	s = f;
-	write(STDERR_FILENO, s, strlen(s));
-	write(STDERR_FILENO, ": ", 2);
-	s = strerror(serrno);
-	write(STDERR_FILENO, s, strlen(s));
-	write(STDERR_FILENO, "\n", 1);
-	exit(ex);
-}
-
-#ifdef COLLATE_DEBUG
-void
-__collate_print_tables()
-{
-	int i;
-	struct __collate_st_chain_pri *p2;
-
-	printf("Substitute table:\n");
-	for (i = 0; i < UCHAR_MAX + 1; i++)
-	    if (i != *__collate_substitute_table[i])
-		printf("\t'%c' --> \"%s\"\n", i,
-		       __collate_substitute_table[i]);
-	printf("Chain priority table:\n");
-	for (p2 = __collate_chain_pri_table; p2->str[0]; p2++)
-		printf("\t\"%s\" : %d %d\n\n", p2->str, p2->prim, p2->sec);
-	printf("Char priority table:\n");
-	for (i = 0; i < UCHAR_MAX + 1; i++)
-		printf("\t'%c' : %d %d\n", i, __collate_char_pri_table[i].prim,
-		       __collate_char_pri_table[i].sec);
-}
-#endif
diff --git a/newlib/libc/sys/linux/stdlib/collate.h b/newlib/libc/sys/linux/stdlib/collate.h
deleted file mode 100644
index 2e045188a..000000000
--- a/newlib/libc/sys/linux/stdlib/collate.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*-
- * Copyright (c) 1995 Alex Tatmanjants <alex@elvisti.kiev.ua>
- *		at Electronni Visti IA, Kiev, Ukraine.
- *			All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/lib/libc/locale/collate.h,v 1.11 2002/03/21 22:46:54 obrien Exp $
- */
-
-#ifndef _COLLATE_H_
-#define	_COLLATE_H_
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <limits.h>
-
-#define STR_LEN 10
-#define TABLE_SIZE 100
-#define COLLATE_VERSION "1.0\n"
-
-struct __collate_st_char_pri {
-	int prim, sec;
-};
-struct __collate_st_chain_pri {
-	u_char str[STR_LEN];
-	int prim, sec;
-};
-
-extern int __collate_load_error;
-extern int __collate_substitute_nontrivial;
-extern char __collate_version[STR_LEN];
-extern u_char __collate_substitute_table[UCHAR_MAX + 1][STR_LEN];
-extern struct __collate_st_char_pri __collate_char_pri_table[UCHAR_MAX + 1];
-extern struct __collate_st_chain_pri __collate_chain_pri_table[TABLE_SIZE];
-
-__BEGIN_DECLS
-u_char	*__collate_strdup(u_char *);
-u_char	*__collate_substitute(const u_char *);
-int	__collate_load_tables(char *);
-void	__collate_lookup(const u_char *, int *, int *, int *);
-int	__collate_range_cmp(int, int);
-#ifdef COLLATE_DEBUG
-void	__collate_print_tables(void);
-#endif
-__END_DECLS
-
-#endif /* !_COLLATE_H_ */
diff --git a/newlib/libc/sys/linux/stdlib/collcmp.c b/newlib/libc/sys/linux/stdlib/collcmp.c
deleted file mode 100644
index 97046a9d5..000000000
--- a/newlib/libc/sys/linux/stdlib/collcmp.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 1996 by Andrey A. Chernov, Moscow, Russia.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/locale/collcmp.c,v 1.14 2002/03/22 21:52:18 obrien Exp $");
-
-#define ASCII_COMPATIBLE_COLLATE        /* see share/colldef */
-
-#include <string.h>
-#include "collate.h"
-#ifndef ASCII_COMPATIBLE_COLLATE
-#include <ctype.h>
-#endif
-
-/*
- * Compare two characters converting collate information
- * into ASCII-compatible range, it allows to handle
- * "[a-z]"-type ranges with national characters.
- */
-
-int __collate_range_cmp (c1, c2)
-	int c1, c2;
-{
-	static char s1[2], s2[2];
-	int ret;
-#ifndef ASCII_COMPATIBLE_COLLATE
-	int as1, as2, al1, al2;
-#endif
-
-	c1 &= UCHAR_MAX;
-	c2 &= UCHAR_MAX;
-	if (c1 == c2)
-		return (0);
-
-#ifndef ASCII_COMPATIBLE_COLLATE
-	as1 = isascii(c1);
-	as2 = isascii(c2);
-	al1 = isalpha(c1);
-	al2 = isalpha(c2);
-
-	if (as1 || as2 || al1 || al2) {
-		if ((as1 && as2) || (!al1 && !al2))
-			return (c1 - c2);
-		if (al1 && !al2) {
-			if (isupper(c1))
-				return ('A' - c2);
-			else
-				return ('a' - c2);
-		} else if (al2 && !al1) {
-			if (isupper(c2))
-				return (c1 - 'A');
-			else
-				return (c1 - 'a');
-		}
-	}
-#endif
-	s1[0] = c1;
-	s2[0] = c2;
-	if ((ret = strcoll(s1, s2)) != 0)
-		return (ret);
-	return (c1 - c2);
-}
diff --git a/newlib/libc/sys/linux/stdlib/engine.c b/newlib/libc/sys/linux/stdlib/engine.c
deleted file mode 100644
index 92f756f7b..000000000
--- a/newlib/libc/sys/linux/stdlib/engine.c
+++ /dev/null
@@ -1,1140 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)engine.c	8.5 (Berkeley) 3/20/94
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/regex/engine.c,v 1.12 2002/03/22 21:52:47 obrien Exp $");
-
-/*
- * The matching engine and friends.  This file is #included by regexec.c
- * after suitable #defines of a variety of macros used herein, so that
- * different state representations can be used without duplicating masses
- * of code.
- */
-
-#ifdef SNAMES
-#define	matcher	smatcher
-#define	fast	sfast
-#define	slow	sslow
-#define	dissect	sdissect
-#define	backref	sbackref
-#define	step	sstep
-#define	print	sprint
-#define	at	sat
-#define	match	smat
-#endif
-#ifdef LNAMES
-#define	matcher	lmatcher
-#define	fast	lfast
-#define	slow	lslow
-#define	dissect	ldissect
-#define	backref	lbackref
-#define	step	lstep
-#define	print	lprint
-#define	at	lat
-#define	match	lmat
-#endif
-
-/* another structure passed up and down to avoid zillions of parameters */
-struct match {
-	struct re_guts *g;
-	int eflags;
-	regmatch_t *pmatch;	/* [nsub+1] (0 element unused) */
-	char *offp;		/* offsets work from here */
-	char *beginp;		/* start of string -- virtual NUL precedes */
-	char *endp;		/* end of string -- virtual NUL here */
-	char *coldp;		/* can be no match starting before here */
-	char **lastpos;		/* [nplus+1] */
-	STATEVARS;
-	states st;		/* current states */
-	states fresh;		/* states for a fresh start */
-	states tmp;		/* temporary */
-	states empty;		/* empty set of states */
-};
-
-/* ========= begin header generated by ./mkh ========= */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* === engine.c === */
-static int matcher(struct re_guts *g, char *string, size_t nmatch, regmatch_t pmatch[], int eflags);
-static char *dissect(struct match *m, char *start, char *stop, sopno startst, sopno stopst);
-static char *backref(struct match *m, char *start, char *stop, sopno startst, sopno stopst, sopno lev);
-static char *fast(struct match *m, char *start, char *stop, sopno startst, sopno stopst);
-static char *slow(struct match *m, char *start, char *stop, sopno startst, sopno stopst);
-static states step(struct re_guts *g, sopno start, sopno stop, states bef, int ch, states aft);
-#define	BOL	(OUT+1)
-#define	EOL	(BOL+1)
-#define	BOLEOL	(BOL+2)
-#define	NOTHING	(BOL+3)
-#define	BOW	(BOL+4)
-#define	EOW	(BOL+5)
-#define	CODEMAX	(BOL+5)		/* highest code used */
-#define	NONCHAR(c)	((c) > CHAR_MAX)
-#define	NNONCHAR	(CODEMAX-CHAR_MAX)
-#ifdef REDEBUG
-static void print(struct match *m, char *caption, states st, int ch, FILE *d);
-#endif
-#ifdef REDEBUG
-static void at(struct match *m, char *title, char *start, char *stop, sopno startst, sopno stopst);
-#endif
-#ifdef REDEBUG
-static char *pchar(int ch);
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-/* ========= end header generated by ./mkh ========= */
-
-#ifdef REDEBUG
-#define	SP(t, s, c)	print(m, t, s, c, stdout)
-#define	AT(t, p1, p2, s1, s2)	at(m, t, p1, p2, s1, s2)
-#define	NOTE(str)	{ if (m->eflags&REG_TRACE) printf("=%s\n", (str)); }
-#else
-#define	SP(t, s, c)	/* nothing */
-#define	AT(t, p1, p2, s1, s2)	/* nothing */
-#define	NOTE(s)	/* nothing */
-#endif
-
-/*
- - matcher - the actual matching engine
- == static int matcher(struct re_guts *g, char *string, \
- ==	size_t nmatch, regmatch_t pmatch[], int eflags);
- */
-static int			/* 0 success, REG_NOMATCH failure */
-matcher(g, string, nmatch, pmatch, eflags)
-struct re_guts *g;
-char *string;
-size_t nmatch;
-regmatch_t pmatch[];
-int eflags;
-{
-	char *endp;
-	int i;
-	struct match mv;
-	struct match *m = &mv;
-	char *dp;
-	const sopno gf = g->firststate+1;	/* +1 for OEND */
-	const sopno gl = g->laststate;
-	char *start;
-	char *stop;
-	/* Boyer-Moore algorithms variables */
-	char *pp;
-	int cj, mj;
-	char *mustfirst;
-	char *mustlast;
-	int *matchjump;
-	int *charjump;
-
-	/* simplify the situation where possible */
-	if (g->cflags&REG_NOSUB)
-		nmatch = 0;
-	if (eflags&REG_STARTEND) {
-		start = string + pmatch[0].rm_so;
-		stop = string + pmatch[0].rm_eo;
-	} else {
-		start = string;
-		stop = start + strlen(start);
-	}
-	if (stop < start)
-		return(REG_INVARG);
-
-	/* prescreening; this does wonders for this rather slow code */
-	if (g->must != NULL) {
-		if (g->charjump != NULL && g->matchjump != NULL) {
-			mustfirst = g->must;
-			mustlast = g->must + g->mlen - 1;
-			charjump = g->charjump;
-			matchjump = g->matchjump;
-			pp = mustlast;
-			for (dp = start+g->mlen-1; dp < stop;) {
-				/* Fast skip non-matches */
-				while (dp < stop && charjump[*dp])
-					dp += charjump[*dp];
-
-				if (dp >= stop)
-					break;
-
-				/* Greedy matcher */
-				/* We depend on not being used for
-				 * for strings of length 1
-				 */
-				while (*--dp == *--pp && pp != mustfirst);
-
-				if (*dp == *pp)
-					break;
-
-				/* Jump to next possible match */
-				mj = matchjump[pp - mustfirst];
-				cj = charjump[*dp];
-				dp += (cj < mj ? mj : cj);
-				pp = mustlast;
-			}
-			if (pp != mustfirst)
-				return(REG_NOMATCH);
-		} else {
-			for (dp = start; dp < stop; dp++)
-				if (*dp == g->must[0] &&
-				    stop - dp >= g->mlen &&
-				    memcmp(dp, g->must, (size_t)g->mlen) == 0)
-					break;
-			if (dp == stop)		/* we didn't find g->must */
-				return(REG_NOMATCH);
-		}
-	}
-
-	/* match struct setup */
-	m->g = g;
-	m->eflags = eflags;
-	m->pmatch = NULL;
-	m->lastpos = NULL;
-	m->offp = string;
-	m->beginp = start;
-	m->endp = stop;
-	STATESETUP(m, 4);
-	SETUP(m->st);
-	SETUP(m->fresh);
-	SETUP(m->tmp);
-	SETUP(m->empty);
-	CLEAR(m->empty);
-
-	/* Adjust start according to moffset, to speed things up */
-	if (g->moffset > -1)
-		start = ((dp - g->moffset) < start) ? start : dp - g->moffset;
-
-	/* this loop does only one repetition except for backrefs */
-	for (;;) {
-		endp = fast(m, start, stop, gf, gl);
-		if (endp == NULL) {		/* a miss */
-			STATETEARDOWN(m);
-			return(REG_NOMATCH);
-		}
-		if (nmatch == 0 && !g->backrefs)
-			break;		/* no further info needed */
-
-		/* where? */
-		assert(m->coldp != NULL);
-		for (;;) {
-			NOTE("finding start");
-			endp = slow(m, m->coldp, stop, gf, gl);
-			if (endp != NULL)
-				break;
-			assert(m->coldp < m->endp);
-			m->coldp++;
-		}
-		if (nmatch == 1 && !g->backrefs)
-			break;		/* no further info needed */
-
-		/* oh my, he wants the subexpressions... */
-		if (m->pmatch == NULL)
-			m->pmatch = (regmatch_t *)malloc((m->g->nsub + 1) *
-							sizeof(regmatch_t));
-		if (m->pmatch == NULL) {
-			STATETEARDOWN(m);
-			return(REG_ESPACE);
-		}
-		for (i = 1; i <= m->g->nsub; i++)
-			m->pmatch[i].rm_so = m->pmatch[i].rm_eo = -1;
-		if (!g->backrefs && !(m->eflags&REG_BACKR)) {
-			NOTE("dissecting");
-			dp = dissect(m, m->coldp, endp, gf, gl);
-		} else {
-			if (g->nplus > 0 && m->lastpos == NULL)
-				m->lastpos = (char **)malloc((g->nplus+1) *
-							sizeof(char *));
-			if (g->nplus > 0 && m->lastpos == NULL) {
-				free(m->pmatch);
-				STATETEARDOWN(m);
-				return(REG_ESPACE);
-			}
-			NOTE("backref dissect");
-			dp = backref(m, m->coldp, endp, gf, gl, (sopno)0);
-		}
-		if (dp != NULL)
-			break;
-
-		/* uh-oh... we couldn't find a subexpression-level match */
-		assert(g->backrefs);	/* must be back references doing it */
-		assert(g->nplus == 0 || m->lastpos != NULL);
-		for (;;) {
-			if (dp != NULL || endp <= m->coldp)
-				break;		/* defeat */
-			NOTE("backoff");
-			endp = slow(m, m->coldp, endp-1, gf, gl);
-			if (endp == NULL)
-				break;		/* defeat */
-			/* try it on a shorter possibility */
-#ifndef NDEBUG
-			for (i = 1; i <= m->g->nsub; i++) {
-				assert(m->pmatch[i].rm_so == -1);
-				assert(m->pmatch[i].rm_eo == -1);
-			}
-#endif
-			NOTE("backoff dissect");
-			dp = backref(m, m->coldp, endp, gf, gl, (sopno)0);
-		}
-		assert(dp == NULL || dp == endp);
-		if (dp != NULL)		/* found a shorter one */
-			break;
-
-		/* despite initial appearances, there is no match here */
-		NOTE("false alarm");
-		start = m->coldp + 1;	/* recycle starting later */
-		assert(start <= stop);
-	}
-
-	/* fill in the details if requested */
-	if (nmatch > 0) {
-		pmatch[0].rm_so = m->coldp - m->offp;
-		pmatch[0].rm_eo = endp - m->offp;
-	}
-	if (nmatch > 1) {
-		assert(m->pmatch != NULL);
-		for (i = 1; i < nmatch; i++)
-			if (i <= m->g->nsub)
-				pmatch[i] = m->pmatch[i];
-			else {
-				pmatch[i].rm_so = -1;
-				pmatch[i].rm_eo = -1;
-			}
-	}
-
-	if (m->pmatch != NULL)
-		free((char *)m->pmatch);
-	if (m->lastpos != NULL)
-		free((char *)m->lastpos);
-	STATETEARDOWN(m);
-	return(0);
-}
-
-/*
- - dissect - figure out what matched what, no back references
- == static char *dissect(struct match *m, char *start, \
- ==	char *stop, sopno startst, sopno stopst);
- */
-static char *			/* == stop (success) always */
-dissect(m, start, stop, startst, stopst)
-struct match *m;
-char *start;
-char *stop;
-sopno startst;
-sopno stopst;
-{
-	int i;
-	sopno ss;		/* start sop of current subRE */
-	sopno es;		/* end sop of current subRE */
-	char *sp;		/* start of string matched by it */
-	char *stp;		/* string matched by it cannot pass here */
-	char *rest;		/* start of rest of string */
-	char *tail;		/* string unmatched by rest of RE */
-	sopno ssub;		/* start sop of subsubRE */
-	sopno esub;		/* end sop of subsubRE */
-	char *ssp;		/* start of string matched by subsubRE */
-	char *sep;		/* end of string matched by subsubRE */
-	char *oldssp;		/* previous ssp */
-	char *dp;
-
-	AT("diss", start, stop, startst, stopst);
-	sp = start;
-	for (ss = startst; ss < stopst; ss = es) {
-		/* identify end of subRE */
-		es = ss;
-		switch (OP(m->g->strip[es])) {
-		case OPLUS_:
-		case OQUEST_:
-			es += OPND(m->g->strip[es]);
-			break;
-		case OCH_:
-			while (OP(m->g->strip[es]) != O_CH)
-				es += OPND(m->g->strip[es]);
-			break;
-		}
-		es++;
-
-		/* figure out what it matched */
-		switch (OP(m->g->strip[ss])) {
-		case OEND:
-			assert(nope);
-			break;
-		case OCHAR:
-			sp++;
-			break;
-		case OBOL:
-		case OEOL:
-		case OBOW:
-		case OEOW:
-			break;
-		case OANY:
-		case OANYOF:
-			sp++;
-			break;
-		case OBACK_:
-		case O_BACK:
-			assert(nope);
-			break;
-		/* cases where length of match is hard to find */
-		case OQUEST_:
-			stp = stop;
-			for (;;) {
-				/* how long could this one be? */
-				rest = slow(m, sp, stp, ss, es);
-				assert(rest != NULL);	/* it did match */
-				/* could the rest match the rest? */
-				tail = slow(m, rest, stop, es, stopst);
-				if (tail == stop)
-					break;		/* yes! */
-				/* no -- try a shorter match for this one */
-				stp = rest - 1;
-				assert(stp >= sp);	/* it did work */
-			}
-			ssub = ss + 1;
-			esub = es - 1;
-			/* did innards match? */
-			if (slow(m, sp, rest, ssub, esub) != NULL) {
-				dp = dissect(m, sp, rest, ssub, esub);
-				assert(dp == rest);
-			} else		/* no */
-				assert(sp == rest);
-			sp = rest;
-			break;
-		case OPLUS_:
-			stp = stop;
-			for (;;) {
-				/* how long could this one be? */
-				rest = slow(m, sp, stp, ss, es);
-				assert(rest != NULL);	/* it did match */
-				/* could the rest match the rest? */
-				tail = slow(m, rest, stop, es, stopst);
-				if (tail == stop)
-					break;		/* yes! */
-				/* no -- try a shorter match for this one */
-				stp = rest - 1;
-				assert(stp >= sp);	/* it did work */
-			}
-			ssub = ss + 1;
-			esub = es - 1;
-			ssp = sp;
-			oldssp = ssp;
-			for (;;) {	/* find last match of innards */
-				sep = slow(m, ssp, rest, ssub, esub);
-				if (sep == NULL || sep == ssp)
-					break;	/* failed or matched null */
-				oldssp = ssp;	/* on to next try */
-				ssp = sep;
-			}
-			if (sep == NULL) {
-				/* last successful match */
-				sep = ssp;
-				ssp = oldssp;
-			}
-			assert(sep == rest);	/* must exhaust substring */
-			assert(slow(m, ssp, sep, ssub, esub) == rest);
-			dp = dissect(m, ssp, sep, ssub, esub);
-			assert(dp == sep);
-			sp = rest;
-			break;
-		case OCH_:
-			stp = stop;
-			for (;;) {
-				/* how long could this one be? */
-				rest = slow(m, sp, stp, ss, es);
-				assert(rest != NULL);	/* it did match */
-				/* could the rest match the rest? */
-				tail = slow(m, rest, stop, es, stopst);
-				if (tail == stop)
-					break;		/* yes! */
-				/* no -- try a shorter match for this one */
-				stp = rest - 1;
-				assert(stp >= sp);	/* it did work */
-			}
-			ssub = ss + 1;
-			esub = ss + OPND(m->g->strip[ss]) - 1;
-			assert(OP(m->g->strip[esub]) == OOR1);
-			for (;;) {	/* find first matching branch */
-				if (slow(m, sp, rest, ssub, esub) == rest)
-					break;	/* it matched all of it */
-				/* that one missed, try next one */
-				assert(OP(m->g->strip[esub]) == OOR1);
-				esub++;
-				assert(OP(m->g->strip[esub]) == OOR2);
-				ssub = esub + 1;
-				esub += OPND(m->g->strip[esub]);
-				if (OP(m->g->strip[esub]) == OOR2)
-					esub--;
-				else
-					assert(OP(m->g->strip[esub]) == O_CH);
-			}
-			dp = dissect(m, sp, rest, ssub, esub);
-			assert(dp == rest);
-			sp = rest;
-			break;
-		case O_PLUS:
-		case O_QUEST:
-		case OOR1:
-		case OOR2:
-		case O_CH:
-			assert(nope);
-			break;
-		case OLPAREN:
-			i = OPND(m->g->strip[ss]);
-			assert(0 < i && i <= m->g->nsub);
-			m->pmatch[i].rm_so = sp - m->offp;
-			break;
-		case ORPAREN:
-			i = OPND(m->g->strip[ss]);
-			assert(0 < i && i <= m->g->nsub);
-			m->pmatch[i].rm_eo = sp - m->offp;
-			break;
-		default:		/* uh oh */
-			assert(nope);
-			break;
-		}
-	}
-
-	assert(sp == stop);
-	return(sp);
-}
-
-/*
- - backref - figure out what matched what, figuring in back references
- == static char *backref(struct match *m, char *start, \
- ==	char *stop, sopno startst, sopno stopst, sopno lev);
- */
-static char *			/* == stop (success) or NULL (failure) */
-backref(m, start, stop, startst, stopst, lev)
-struct match *m;
-char *start;
-char *stop;
-sopno startst;
-sopno stopst;
-sopno lev;			/* PLUS nesting level */
-{
-	int i;
-	sopno ss;		/* start sop of current subRE */
-	char *sp;		/* start of string matched by it */
-	sopno ssub;		/* start sop of subsubRE */
-	sopno esub;		/* end sop of subsubRE */
-	char *ssp;		/* start of string matched by subsubRE */
-	char *dp;
-	size_t len;
-	int hard;
-	sop s;
-	regoff_t offsave;
-	cset *cs;
-
-	AT("back", start, stop, startst, stopst);
-	sp = start;
-
-	/* get as far as we can with easy stuff */
-	hard = 0;
-	for (ss = startst; !hard && ss < stopst; ss++)
-		switch (OP(s = m->g->strip[ss])) {
-		case OCHAR:
-			if (sp == stop || *sp++ != (char)OPND(s))
-				return(NULL);
-			break;
-		case OANY:
-			if (sp == stop)
-				return(NULL);
-			sp++;
-			break;
-		case OANYOF:
-			cs = &m->g->sets[OPND(s)];
-			if (sp == stop || !CHIN(cs, *sp++))
-				return(NULL);
-			break;
-		case OBOL:
-			if ( (sp == m->beginp && !(m->eflags&REG_NOTBOL)) ||
-					(sp < m->endp && *(sp-1) == '\n' &&
-						(m->g->cflags&REG_NEWLINE)) )
-				{ /* yes */ }
-			else
-				return(NULL);
-			break;
-		case OEOL:
-			if ( (sp == m->endp && !(m->eflags&REG_NOTEOL)) ||
-					(sp < m->endp && *sp == '\n' &&
-						(m->g->cflags&REG_NEWLINE)) )
-				{ /* yes */ }
-			else
-				return(NULL);
-			break;
-		case OBOW:
-			if (( (sp == m->beginp && !(m->eflags&REG_NOTBOL)) ||
-					(sp < m->endp && *(sp-1) == '\n' &&
-						(m->g->cflags&REG_NEWLINE)) ||
-					(sp > m->beginp &&
-							!ISWORD(*(sp-1))) ) &&
-					(sp < m->endp && ISWORD(*sp)) )
-				{ /* yes */ }
-			else
-				return(NULL);
-			break;
-		case OEOW:
-			if (( (sp == m->endp && !(m->eflags&REG_NOTEOL)) ||
-					(sp < m->endp && *sp == '\n' &&
-						(m->g->cflags&REG_NEWLINE)) ||
-					(sp < m->endp && !ISWORD(*sp)) ) &&
-					(sp > m->beginp && ISWORD(*(sp-1))) )
-				{ /* yes */ }
-			else
-				return(NULL);
-			break;
-		case O_QUEST:
-			break;
-		case OOR1:	/* matches null but needs to skip */
-			ss++;
-			s = m->g->strip[ss];
-			do {
-				assert(OP(s) == OOR2);
-				ss += OPND(s);
-			} while (OP(s = m->g->strip[ss]) != O_CH);
-			/* note that the ss++ gets us past the O_CH */
-			break;
-		default:	/* have to make a choice */
-			hard = 1;
-			break;
-		}
-	if (!hard) {		/* that was it! */
-		if (sp != stop)
-			return(NULL);
-		return(sp);
-	}
-	ss--;			/* adjust for the for's final increment */
-
-	/* the hard stuff */
-	AT("hard", sp, stop, ss, stopst);
-	s = m->g->strip[ss];
-	switch (OP(s)) {
-	case OBACK_:		/* the vilest depths */
-		i = OPND(s);
-		assert(0 < i && i <= m->g->nsub);
-		if (m->pmatch[i].rm_eo == -1)
-			return(NULL);
-		assert(m->pmatch[i].rm_so != -1);
-		len = m->pmatch[i].rm_eo - m->pmatch[i].rm_so;
-		assert(stop - m->beginp >= len);
-		if (sp > stop - len)
-			return(NULL);	/* not enough left to match */
-		ssp = m->offp + m->pmatch[i].rm_so;
-		if (memcmp(sp, ssp, len) != 0)
-			return(NULL);
-		while (m->g->strip[ss] != SOP(O_BACK, i))
-			ss++;
-		return(backref(m, sp+len, stop, ss+1, stopst, lev));
-		break;
-	case OQUEST_:		/* to null or not */
-		dp = backref(m, sp, stop, ss+1, stopst, lev);
-		if (dp != NULL)
-			return(dp);	/* not */
-		return(backref(m, sp, stop, ss+OPND(s)+1, stopst, lev));
-		break;
-	case OPLUS_:
-		assert(m->lastpos != NULL);
-		assert(lev+1 <= m->g->nplus);
-		m->lastpos[lev+1] = sp;
-		return(backref(m, sp, stop, ss+1, stopst, lev+1));
-		break;
-	case O_PLUS:
-		if (sp == m->lastpos[lev])	/* last pass matched null */
-			return(backref(m, sp, stop, ss+1, stopst, lev-1));
-		/* try another pass */
-		m->lastpos[lev] = sp;
-		dp = backref(m, sp, stop, ss-OPND(s)+1, stopst, lev);
-		if (dp == NULL)
-			return(backref(m, sp, stop, ss+1, stopst, lev-1));
-		else
-			return(dp);
-		break;
-	case OCH_:		/* find the right one, if any */
-		ssub = ss + 1;
-		esub = ss + OPND(s) - 1;
-		assert(OP(m->g->strip[esub]) == OOR1);
-		for (;;) {	/* find first matching branch */
-			dp = backref(m, sp, stop, ssub, esub, lev);
-			if (dp != NULL)
-				return(dp);
-			/* that one missed, try next one */
-			if (OP(m->g->strip[esub]) == O_CH)
-				return(NULL);	/* there is none */
-			esub++;
-			assert(OP(m->g->strip[esub]) == OOR2);
-			ssub = esub + 1;
-			esub += OPND(m->g->strip[esub]);
-			if (OP(m->g->strip[esub]) == OOR2)
-				esub--;
-			else
-				assert(OP(m->g->strip[esub]) == O_CH);
-		}
-		break;
-	case OLPAREN:		/* must undo assignment if rest fails */
-		i = OPND(s);
-		assert(0 < i && i <= m->g->nsub);
-		offsave = m->pmatch[i].rm_so;
-		m->pmatch[i].rm_so = sp - m->offp;
-		dp = backref(m, sp, stop, ss+1, stopst, lev);
-		if (dp != NULL)
-			return(dp);
-		m->pmatch[i].rm_so = offsave;
-		return(NULL);
-		break;
-	case ORPAREN:		/* must undo assignment if rest fails */
-		i = OPND(s);
-		assert(0 < i && i <= m->g->nsub);
-		offsave = m->pmatch[i].rm_eo;
-		m->pmatch[i].rm_eo = sp - m->offp;
-		dp = backref(m, sp, stop, ss+1, stopst, lev);
-		if (dp != NULL)
-			return(dp);
-		m->pmatch[i].rm_eo = offsave;
-		return(NULL);
-		break;
-	default:		/* uh oh */
-		assert(nope);
-		break;
-	}
-
-	/* "can't happen" */
-	assert(nope);
-	/* NOTREACHED */
-	return "shut up gcc";
-}
-
-/*
- - fast - step through the string at top speed
- == static char *fast(struct match *m, char *start, \
- ==	char *stop, sopno startst, sopno stopst);
- */
-static char *			/* where tentative match ended, or NULL */
-fast(m, start, stop, startst, stopst)
-struct match *m;
-char *start;
-char *stop;
-sopno startst;
-sopno stopst;
-{
-	states st = m->st;
-	states fresh = m->fresh;
-	states tmp = m->tmp;
-	char *p = start;
-	int c = (start == m->beginp) ? OUT : *(start-1);
-	int lastc;		/* previous c */
-	int flagch;
-	int i;
-	char *coldp;		/* last p after which no match was underway */
-
-	CLEAR(st);
-	SET1(st, startst);
-	st = step(m->g, startst, stopst, st, NOTHING, st);
-	ASSIGN(fresh, st);
-	SP("start", st, *p);
-	coldp = NULL;
-	for (;;) {
-		/* next character */
-		lastc = c;
-		c = (p == m->endp) ? OUT : *p;
-		if (EQ(st, fresh))
-			coldp = p;
-
-		/* is there an EOL and/or BOL between lastc and c? */
-		flagch = '\0';
-		i = 0;
-		if ( (lastc == '\n' && m->g->cflags&REG_NEWLINE) ||
-				(lastc == OUT && !(m->eflags&REG_NOTBOL)) ) {
-			flagch = BOL;
-			i = m->g->nbol;
-		}
-		if ( (c == '\n' && m->g->cflags&REG_NEWLINE) ||
-				(c == OUT && !(m->eflags&REG_NOTEOL)) ) {
-			flagch = (flagch == BOL) ? BOLEOL : EOL;
-			i += m->g->neol;
-		}
-		if (i != 0) {
-			for (; i > 0; i--)
-				st = step(m->g, startst, stopst, st, flagch, st);
-			SP("boleol", st, c);
-		}
-
-		/* how about a word boundary? */
-		if ( (flagch == BOL || (lastc != OUT && !ISWORD(lastc))) &&
-					(c != OUT && ISWORD(c)) ) {
-			flagch = BOW;
-		}
-		if ( (lastc != OUT && ISWORD(lastc)) &&
-				(flagch == EOL || (c != OUT && !ISWORD(c))) ) {
-			flagch = EOW;
-		}
-		if (flagch == BOW || flagch == EOW) {
-			st = step(m->g, startst, stopst, st, flagch, st);
-			SP("boweow", st, c);
-		}
-
-		/* are we done? */
-		if (ISSET(st, stopst) || p == stop)
-			break;		/* NOTE BREAK OUT */
-
-		/* no, we must deal with this character */
-		ASSIGN(tmp, st);
-		ASSIGN(st, fresh);
-		assert(c != OUT);
-		st = step(m->g, startst, stopst, tmp, c, st);
-		SP("aft", st, c);
-		assert(EQ(step(m->g, startst, stopst, st, NOTHING, st), st));
-		p++;
-	}
-
-	assert(coldp != NULL);
-	m->coldp = coldp;
-	if (ISSET(st, stopst))
-		return(p+1);
-	else
-		return(NULL);
-}
-
-/*
- - slow - step through the string more deliberately
- == static char *slow(struct match *m, char *start, \
- ==	char *stop, sopno startst, sopno stopst);
- */
-static char *			/* where it ended */
-slow(m, start, stop, startst, stopst)
-struct match *m;
-char *start;
-char *stop;
-sopno startst;
-sopno stopst;
-{
-	states st = m->st;
-	states empty = m->empty;
-	states tmp = m->tmp;
-	char *p = start;
-	int c = (start == m->beginp) ? OUT : *(start-1);
-	int lastc;		/* previous c */
-	int flagch;
-	int i;
-	char *matchp;		/* last p at which a match ended */
-
-	AT("slow", start, stop, startst, stopst);
-	CLEAR(st);
-	SET1(st, startst);
-	SP("sstart", st, *p);
-	st = step(m->g, startst, stopst, st, NOTHING, st);
-	matchp = NULL;
-	for (;;) {
-		/* next character */
-		lastc = c;
-		c = (p == m->endp) ? OUT : *p;
-
-		/* is there an EOL and/or BOL between lastc and c? */
-		flagch = '\0';
-		i = 0;
-		if ( (lastc == '\n' && m->g->cflags&REG_NEWLINE) ||
-				(lastc == OUT && !(m->eflags&REG_NOTBOL)) ) {
-			flagch = BOL;
-			i = m->g->nbol;
-		}
-		if ( (c == '\n' && m->g->cflags&REG_NEWLINE) ||
-				(c == OUT && !(m->eflags&REG_NOTEOL)) ) {
-			flagch = (flagch == BOL) ? BOLEOL : EOL;
-			i += m->g->neol;
-		}
-		if (i != 0) {
-			for (; i > 0; i--)
-				st = step(m->g, startst, stopst, st, flagch, st);
-			SP("sboleol", st, c);
-		}
-
-		/* how about a word boundary? */
-		if ( (flagch == BOL || (lastc != OUT && !ISWORD(lastc))) &&
-					(c != OUT && ISWORD(c)) ) {
-			flagch = BOW;
-		}
-		if ( (lastc != OUT && ISWORD(lastc)) &&
-				(flagch == EOL || (c != OUT && !ISWORD(c))) ) {
-			flagch = EOW;
-		}
-		if (flagch == BOW || flagch == EOW) {
-			st = step(m->g, startst, stopst, st, flagch, st);
-			SP("sboweow", st, c);
-		}
-
-		/* are we done? */
-		if (ISSET(st, stopst))
-			matchp = p;
-		if (EQ(st, empty) || p == stop)
-			break;		/* NOTE BREAK OUT */
-
-		/* no, we must deal with this character */
-		ASSIGN(tmp, st);
-		ASSIGN(st, empty);
-		assert(c != OUT);
-		st = step(m->g, startst, stopst, tmp, c, st);
-		SP("saft", st, c);
-		assert(EQ(step(m->g, startst, stopst, st, NOTHING, st), st));
-		p++;
-	}
-
-	return(matchp);
-}
-
-
-/*
- - step - map set of states reachable before char to set reachable after
- == static states step(struct re_guts *g, sopno start, sopno stop, \
- ==	states bef, int ch, states aft);
- == #define	BOL	(OUT+1)
- == #define	EOL	(BOL+1)
- == #define	BOLEOL	(BOL+2)
- == #define	NOTHING	(BOL+3)
- == #define	BOW	(BOL+4)
- == #define	EOW	(BOL+5)
- == #define	CODEMAX	(BOL+5)		// highest code used
- == #define	NONCHAR(c)	((c) > CHAR_MAX)
- == #define	NNONCHAR	(CODEMAX-CHAR_MAX)
- */
-static states
-step(g, start, stop, bef, ch, aft)
-struct re_guts *g;
-sopno start;			/* start state within strip */
-sopno stop;			/* state after stop state within strip */
-states bef;			/* states reachable before */
-int ch;				/* character or NONCHAR code */
-states aft;			/* states already known reachable after */
-{
-	cset *cs;
-	sop s;
-	sopno pc;
-	onestate here;		/* note, macros know this name */
-	sopno look;
-	int i;
-
-	for (pc = start, INIT(here, pc); pc != stop; pc++, INC(here)) {
-		s = g->strip[pc];
-		switch (OP(s)) {
-		case OEND:
-			assert(pc == stop-1);
-			break;
-		case OCHAR:
-			/* only characters can match */
-			assert(!NONCHAR(ch) || ch != (char)OPND(s));
-			if (ch == (char)OPND(s))
-				FWD(aft, bef, 1);
-			break;
-		case OBOL:
-			if (ch == BOL || ch == BOLEOL)
-				FWD(aft, bef, 1);
-			break;
-		case OEOL:
-			if (ch == EOL || ch == BOLEOL)
-				FWD(aft, bef, 1);
-			break;
-		case OBOW:
-			if (ch == BOW)
-				FWD(aft, bef, 1);
-			break;
-		case OEOW:
-			if (ch == EOW)
-				FWD(aft, bef, 1);
-			break;
-		case OANY:
-			if (!NONCHAR(ch))
-				FWD(aft, bef, 1);
-			break;
-		case OANYOF:
-			cs = &g->sets[OPND(s)];
-			if (!NONCHAR(ch) && CHIN(cs, ch))
-				FWD(aft, bef, 1);
-			break;
-		case OBACK_:		/* ignored here */
-		case O_BACK:
-			FWD(aft, aft, 1);
-			break;
-		case OPLUS_:		/* forward, this is just an empty */
-			FWD(aft, aft, 1);
-			break;
-		case O_PLUS:		/* both forward and back */
-			FWD(aft, aft, 1);
-			i = ISSETBACK(aft, OPND(s));
-			BACK(aft, aft, OPND(s));
-			if (!i && ISSETBACK(aft, OPND(s))) {
-				/* oho, must reconsider loop body */
-				pc -= OPND(s) + 1;
-				INIT(here, pc);
-			}
-			break;
-		case OQUEST_:		/* two branches, both forward */
-			FWD(aft, aft, 1);
-			FWD(aft, aft, OPND(s));
-			break;
-		case O_QUEST:		/* just an empty */
-			FWD(aft, aft, 1);
-			break;
-		case OLPAREN:		/* not significant here */
-		case ORPAREN:
-			FWD(aft, aft, 1);
-			break;
-		case OCH_:		/* mark the first two branches */
-			FWD(aft, aft, 1);
-			assert(OP(g->strip[pc+OPND(s)]) == OOR2);
-			FWD(aft, aft, OPND(s));
-			break;
-		case OOR1:		/* done a branch, find the O_CH */
-			if (ISSTATEIN(aft, here)) {
-				for (look = 1;
-						OP(s = g->strip[pc+look]) != O_CH;
-						look += OPND(s))
-					assert(OP(s) == OOR2);
-				FWD(aft, aft, look);
-			}
-			break;
-		case OOR2:		/* propagate OCH_'s marking */
-			FWD(aft, aft, 1);
-			if (OP(g->strip[pc+OPND(s)]) != O_CH) {
-				assert(OP(g->strip[pc+OPND(s)]) == OOR2);
-				FWD(aft, aft, OPND(s));
-			}
-			break;
-		case O_CH:		/* just empty */
-			FWD(aft, aft, 1);
-			break;
-		default:		/* ooooops... */
-			assert(nope);
-			break;
-		}
-	}
-
-	return(aft);
-}
-
-#ifdef REDEBUG
-/*
- - print - print a set of states
- == #ifdef REDEBUG
- == static void print(struct match *m, char *caption, states st, \
- ==	int ch, FILE *d);
- == #endif
- */
-static void
-print(m, caption, st, ch, d)
-struct match *m;
-char *caption;
-states st;
-int ch;
-FILE *d;
-{
-	struct re_guts *g = m->g;
-	int i;
-	int first = 1;
-
-	if (!(m->eflags&REG_TRACE))
-		return;
-
-	fprintf(d, "%s", caption);
-	if (ch != '\0')
-		fprintf(d, " %s", pchar(ch));
-	for (i = 0; i < g->nstates; i++)
-		if (ISSET(st, i)) {
-			fprintf(d, "%s%d", (first) ? "\t" : ", ", i);
-			first = 0;
-		}
-	fprintf(d, "\n");
-}
-
-/*
- - at - print current situation
- == #ifdef REDEBUG
- == static void at(struct match *m, char *title, char *start, char *stop, \
- ==						sopno startst, sopno stopst);
- == #endif
- */
-static void
-at(m, title, start, stop, startst, stopst)
-struct match *m;
-char *title;
-char *start;
-char *stop;
-sopno startst;
-sopno stopst;
-{
-	if (!(m->eflags&REG_TRACE))
-		return;
-
-	printf("%s %s-", title, pchar(*start));
-	printf("%s ", pchar(*stop));
-	printf("%ld-%ld\n", (long)startst, (long)stopst);
-}
-
-#ifndef PCHARDONE
-#define	PCHARDONE	/* never again */
-/*
- - pchar - make a character printable
- == #ifdef REDEBUG
- == static char *pchar(int ch);
- == #endif
- *
- * Is this identical to regchar() over in debug.c?  Well, yes.  But a
- * duplicate here avoids having a debugging-capable regexec.o tied to
- * a matching debug.o, and this is convenient.  It all disappears in
- * the non-debug compilation anyway, so it doesn't matter much.
- */
-static char *			/* -> representation */
-pchar(ch)
-int ch;
-{
-	static char pbuf[10];
-
-	if (isprint((uch)ch) || ch == ' ')
-		sprintf(pbuf, "%c", ch);
-	else
-		sprintf(pbuf, "\\%o", ch);
-	return(pbuf);
-}
-#endif
-#endif
-
-#undef	matcher
-#undef	fast
-#undef	slow
-#undef	dissect
-#undef	backref
-#undef	step
-#undef	print
-#undef	at
-#undef	match
diff --git a/newlib/libc/sys/linux/stdlib/fnmatch.3 b/newlib/libc/sys/linux/stdlib/fnmatch.3
deleted file mode 100644
index 9c3fda5f9..000000000
--- a/newlib/libc/sys/linux/stdlib/fnmatch.3
+++ /dev/null
@@ -1,151 +0,0 @@
-.\" Copyright (c) 1989, 1991, 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" Guido van Rossum.
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)fnmatch.3	8.3 (Berkeley) 4/28/95
-.\" $FreeBSD: src/lib/libc/gen/fnmatch.3,v 1.12 2001/10/01 16:08:50 ru Exp $
-.\"
-.Dd April 28, 1995
-.Dt FNMATCH 3
-.Os
-.Sh NAME
-.Nm fnmatch
-.Nd match filename or pathname
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In fnmatch.h
-.Ft int
-.Fn fnmatch "const char *pattern" "const char *string" "int flags"
-.Sh DESCRIPTION
-The
-.Fn fnmatch
-function
-matches patterns according to the rules used by the shell.
-It checks the string specified by the
-.Fa string
-argument to see if it matches the pattern specified by the
-.Fa pattern
-argument.
-.Pp
-The
-.Fa flags
-argument modifies the interpretation of
-.Fa pattern
-and
-.Fa string .
-The value of
-.Fa flags
-is the bitwise inclusive
-.Tn OR
-of any of the following
-constants, which are defined in the include file
-.Pa fnmatch.h .
-.Bl -tag -width FNM_PATHNAME
-.It Dv FNM_NOESCAPE
-Normally, every occurrence of a backslash
-.Pq Ql \e
-followed by a character in
-.Fa pattern
-is replaced by that character.
-This is done to negate any special meaning for the character.
-If the
-.Dv FNM_NOESCAPE
-flag is set, a backslash character is treated as an ordinary character.
-.It Dv FNM_PATHNAME
-Slash characters in
-.Fa string
-must be explicitly matched by slashes in
-.Fa pattern .
-If this flag is not set, then slashes are treated as regular characters.
-.It Dv FNM_PERIOD
-Leading periods in
-.Fa string
-must be explicitly matched by periods in
-.Fa pattern .
-If this flag is not set, then leading periods are treated as regular
-characters.
-The definition of
-.Dq leading
-is related to the specification of
-.Dv FNM_PATHNAME .
-A period is always
-.Dq leading
-if it is the first character in
-.Ar string .
-Additionally, if
-.Dv FNM_PATHNAME
-is set,
-a period is
-leading
-if it immediately follows a slash.
-.It Dv FNM_LEADING_DIR
-Ignore
-.Nm /*
-rest after successful
-.Fa pattern
-matching.
-.It Dv FNM_CASEFOLD
-Ignore  case  distinctions in both the
-.Fa pattern
-and the
-.Fa string .
-.El
-.Sh RETURN VALUES
-The
-.Fn fnmatch
-function returns zero if
-.Fa string
-matches the pattern specified by
-.Fa pattern ,
-otherwise, it returns the value
-.Dv FNM_NOMATCH .
-.Sh SEE ALSO
-.Xr sh 1 ,
-.Xr glob 3 ,
-.Xr regex 3
-.Sh STANDARDS
-The
-.Fn fnmatch
-function conforms to
-.St -p1003.2 .
-.Sh HISTORY
-The
-.Fn fnmatch
-function first appeared in
-.Bx 4.4 .
-.Sh BUGS
-The pattern
-.Ql *
-matches the empty string, even if
-.Dv FNM_PATHNAME
-is specified.
diff --git a/newlib/libc/sys/linux/stdlib/fnmatch.c b/newlib/libc/sys/linux/stdlib/fnmatch.c
deleted file mode 100644
index 7b6f10dff..000000000
--- a/newlib/libc/sys/linux/stdlib/fnmatch.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (c) 1989, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Guido van Rossum.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)fnmatch.c	8.2 (Berkeley) 4/16/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/gen/fnmatch.c,v 1.15 2002/02/01 01:32:19 obrien Exp $");
-
-/*
- * Function fnmatch() as specified in POSIX 1003.2-1992, section B.6.
- * Compares a filename or pathname to a pattern.
- */
-
-#include <ctype.h>
-#include <fnmatch.h>
-#include <string.h>
-#include <stdio.h>
-
-#include "collate.h"
-
-#define	EOS	'\0'
-
-#define RANGE_MATCH     1
-#define RANGE_NOMATCH   0
-#define RANGE_ERROR     (-1)
-
-static int rangematch(const char *, char, int, char **);
-
-int
-fnmatch(pattern, string, flags)
-	const char *pattern, *string;
-	int flags;
-{
-	const char *stringstart;
-	char *newp;
-	char c, test;
-
-	for (stringstart = string;;)
-		switch (c = *pattern++) {
-		case EOS:
-			if ((flags & FNM_LEADING_DIR) && *string == '/')
-				return (0);
-			return (*string == EOS ? 0 : FNM_NOMATCH);
-		case '?':
-			if (*string == EOS)
-				return (FNM_NOMATCH);
-			if (*string == '/' && (flags & FNM_PATHNAME))
-				return (FNM_NOMATCH);
-			if (*string == '.' && (flags & FNM_PERIOD) &&
-			    (string == stringstart ||
-			    ((flags & FNM_PATHNAME) && *(string - 1) == '/')))
-				return (FNM_NOMATCH);
-			++string;
-			break;
-		case '*':
-			c = *pattern;
-			/* Collapse multiple stars. */
-			while (c == '*')
-				c = *++pattern;
-
-			if (*string == '.' && (flags & FNM_PERIOD) &&
-			    (string == stringstart ||
-			    ((flags & FNM_PATHNAME) && *(string - 1) == '/')))
-				return (FNM_NOMATCH);
-
-			/* Optimize for pattern with * at end or before /. */
-			if (c == EOS)
-				if (flags & FNM_PATHNAME)
-					return ((flags & FNM_LEADING_DIR) ||
-					    strchr(string, '/') == NULL ?
-					    0 : FNM_NOMATCH);
-				else
-					return (0);
-			else if (c == '/' && flags & FNM_PATHNAME) {
-				if ((string = strchr(string, '/')) == NULL)
-					return (FNM_NOMATCH);
-				break;
-			}
-
-			/* General case, use recursion. */
-			while ((test = *string) != EOS) {
-				if (!fnmatch(pattern, string, flags & ~FNM_PERIOD))
-					return (0);
-				if (test == '/' && flags & FNM_PATHNAME)
-					break;
-				++string;
-			}
-			return (FNM_NOMATCH);
-		case '[':
-			if (*string == EOS)
-				return (FNM_NOMATCH);
-			if (*string == '/' && (flags & FNM_PATHNAME))
-				return (FNM_NOMATCH);
-			if (*string == '.' && (flags & FNM_PERIOD) &&
-			    (string == stringstart ||
-			    ((flags & FNM_PATHNAME) && *(string - 1) == '/')))
-				return (FNM_NOMATCH);
-
-			switch (rangematch(pattern, *string, flags, &newp)) {
-			case RANGE_ERROR:
-				goto norm;
-			case RANGE_MATCH:
-				pattern = newp;
-				break;
-			case RANGE_NOMATCH:
-				return (FNM_NOMATCH);
-			}
-			++string;
-			break;
-		case '\\':
-			if (!(flags & FNM_NOESCAPE)) {
-				if ((c = *pattern++) == EOS) {
-					c = '\\';
-					--pattern;
-				}
-			}
-			/* FALLTHROUGH */
-		default:
-		norm:
-			if (c == *string)
-				;
-			else if ((flags & FNM_CASEFOLD) &&
-				 (tolower((unsigned char)c) ==
-				  tolower((unsigned char)*string)))
-				;
-			else
-				return (FNM_NOMATCH);
-			string++;
-			break;
-		}
-	/* NOTREACHED */
-}
-
-static int
-rangematch(pattern, test, flags, newp)
-	const char *pattern;
-	char test;
-	int flags;
-	char **newp;
-{
-	int negate, ok;
-	char c, c2;
-
-	/*
-	 * A bracket expression starting with an unquoted circumflex
-	 * character produces unspecified results (IEEE 1003.2-1992,
-	 * 3.13.2).  This implementation treats it like '!', for
-	 * consistency with the regular expression syntax.
-	 * J.T. Conklin (conklin@ngai.kaleida.com)
-	 */
-	if ( (negate = (*pattern == '!' || *pattern == '^')) )
-		++pattern;
-
-	if (flags & FNM_CASEFOLD)
-		test = tolower((unsigned char)test);
-
-	/*
-	 * A right bracket shall lose its special meaning and represent
-	 * itself in a bracket expression if it occurs first in the list.
-	 * -- POSIX.2 2.8.3.2
-	 */
-	ok = 0;
-	c = *pattern++;
-	do {
-		if (c == '\\' && !(flags & FNM_NOESCAPE))
-			c = *pattern++;
-		if (c == EOS)
-			return (RANGE_ERROR);
-
-		if (c == '/' && (flags & FNM_PATHNAME))
-			return (RANGE_NOMATCH);
-
-		if (flags & FNM_CASEFOLD)
-			c = tolower((unsigned char)c);
-
-		if (*pattern == '-'
-		    && (c2 = *(pattern+1)) != EOS && c2 != ']') {
-			pattern += 2;
-			if (c2 == '\\' && !(flags & FNM_NOESCAPE))
-				c2 = *pattern++;
-			if (c2 == EOS)
-				return (RANGE_ERROR);
-
-			if (flags & FNM_CASEFOLD)
-				c2 = tolower((unsigned char)c2);
-
-			if (__collate_load_error ?
-			    c <= test && test <= c2 :
-			       __collate_range_cmp(c, test) <= 0
-			    && __collate_range_cmp(test, c2) <= 0
-			   )
-				ok = 1;
-		} else if (c == test)
-			ok = 1;
-	} while ((c = *pattern++) != ']');
-
-	*newp = (char *)pattern;
-	return (ok == negate ? RANGE_NOMATCH : RANGE_MATCH);
-}
diff --git a/newlib/libc/sys/linux/stdlib/glob.3 b/newlib/libc/sys/linux/stdlib/glob.3
deleted file mode 100644
index aa509a363..000000000
--- a/newlib/libc/sys/linux/stdlib/glob.3
+++ /dev/null
@@ -1,466 +0,0 @@
-.\" Copyright (c) 1989, 1991, 1993, 1994
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" Guido van Rossum.
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)glob.3	8.3 (Berkeley) 4/16/94
-.\" $FreeBSD: src/lib/libc/gen/glob.3,v 1.20 2001/10/01 16:08:51 ru Exp $
-.\"
-.Dd April 16, 1994
-.Dt GLOB 3
-.Os
-.Sh NAME
-.Nm glob ,
-.Nm globfree
-.Nd generate pathnames matching a pattern
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In glob.h
-.Ft int
-.Fn glob "const char *pattern" "int flags" "int (*errfunc)(const char *, int)" "glob_t *pglob"
-.Ft void
-.Fn globfree "glob_t *pglob"
-.Sh DESCRIPTION
-The
-.Fn glob
-function
-is a pathname generator that implements the rules for file name pattern
-matching used by the shell.
-.Pp
-The include file
-.Pa glob.h
-defines the structure type
-.Fa glob_t ,
-which contains at least the following fields:
-.Bd -literal
-typedef struct {
-	int gl_pathc;		/* count of total paths so far */
-	int gl_matchc;		/* count of paths matching pattern */
-	int gl_offs;		/* reserved at beginning of gl_pathv */
-	int gl_flags;		/* returned flags */
-	char **gl_pathv;	/* list of paths matching pattern */
-} glob_t;
-.Ed
-.Pp
-The argument
-.Fa pattern
-is a pointer to a pathname pattern to be expanded.
-The
-.Fn glob
-argument
-matches all accessible pathnames against the pattern and creates
-a list of the pathnames that match.
-In order to have access to a pathname,
-.Fn glob
-requires search permission on every component of a path except the last
-and read permission on each directory of any filename component of
-.Fa pattern
-that contains any of the special characters
-.Ql * ,
-.Ql ?\&
-or
-.Ql \&[ .
-.Pp
-The
-.Fn glob
-argument
-stores the number of matched pathnames into the
-.Fa gl_pathc
-field, and a pointer to a list of pointers to pathnames into the
-.Fa gl_pathv
-field.
-The first pointer after the last pathname is
-.Dv NULL .
-If the pattern does not match any pathnames, the returned number of
-matched paths is set to zero.
-.Pp
-It is the caller's responsibility to create the structure pointed to by
-.Fa pglob .
-The
-.Fn glob
-function allocates other space as needed, including the memory pointed
-to by
-.Fa gl_pathv .
-.Pp
-The argument
-.Fa flags
-is used to modify the behavior of
-.Fn glob .
-The value of
-.Fa flags
-is the bitwise inclusive
-.Tn OR
-of any of the following
-values defined in
-.Pa glob.h :
-.Bl -tag -width GLOB_ALTDIRFUNC
-.It Dv GLOB_APPEND
-Append pathnames generated to the ones from a previous call (or calls)
-to
-.Fn glob .
-The value of
-.Fa gl_pathc
-will be the total matches found by this call and the previous call(s).
-The pathnames are appended to, not merged with the pathnames returned by
-the previous call(s).
-Between calls, the caller must not change the setting of the
-.Dv GLOB_DOOFFS
-flag, nor change the value of
-.Fa gl_offs
-when
-.Dv GLOB_DOOFFS
-is set, nor (obviously) call
-.Fn globfree
-for
-.Fa pglob .
-.It Dv GLOB_DOOFFS
-Make use of the
-.Fa gl_offs
-field.
-If this flag is set,
-.Fa gl_offs
-is used to specify how many
-.Dv NULL
-pointers to prepend to the beginning
-of the
-.Fa gl_pathv
-field.
-In other words,
-.Fa gl_pathv
-will point to
-.Fa gl_offs
-.Dv NULL
-pointers,
-followed by
-.Fa gl_pathc
-pathname pointers, followed by a
-.Dv NULL
-pointer.
-.It Dv GLOB_ERR
-Causes
-.Fn glob
-to return when it encounters a directory that it cannot open or read.
-Ordinarily,
-.Fn glob
-continues to find matches.
-.It Dv GLOB_MARK
-Each pathname that is a directory that matches
-.Fa pattern
-has a slash
-appended.
-.It Dv GLOB_NOCHECK
-If
-.Fa pattern
-does not match any pathname, then
-.Fn glob
-returns a list
-consisting of only
-.Fa pattern ,
-with the number of total pathnames is set to 1, and the number of matched
-pathnames set to 0.
-If
-.Dv GLOB_QUOTE
-is set, its effect is present in the pattern returned.
-.It Dv GLOB_NOSORT
-By default, the pathnames are sorted in ascending
-.Tn ASCII
-order;
-this flag prevents that sorting (speeding up
-.Fn glob ) .
-.El
-.Pp
-The following values may also be included in
-.Fa flags ,
-however, they are non-standard extensions to
-.St -p1003.2 .
-.Bl -tag -width GLOB_ALTDIRFUNC
-.It Dv GLOB_ALTDIRFUNC
-The following additional fields in the pglob structure have been
-initialized with alternate functions for glob to use to open, read,
-and close directories and to get stat information on names found
-in those directories.
-.Bd -literal
-void *(*gl_opendir)(const char * name);
-struct dirent *(*gl_readdir)(void *);
-void (*gl_closedir)(void *);
-int (*gl_lstat)(const char *name, struct stat *st);
-int (*gl_stat)(const char *name, struct stat *st);
-.Ed
-.Pp
-This extension is provided to allow programs such as
-.Xr restore 8
-to provide globbing from directories stored on tape.
-.It Dv GLOB_BRACE
-Pre-process the pattern string to expand
-.Ql {pat,pat,...}
-strings like
-.Xr csh 1 .
-The pattern
-.Ql {}
-is left unexpanded for historical reasons (and
-.Xr csh 1
-does the same thing to
-ease typing
-of
-.Xr find 1
-patterns).
-.It Dv GLOB_MAGCHAR
-Set by the
-.Fn glob
-function if the pattern included globbing characters.
-See the description of the usage of the
-.Fa gl_matchc
-structure member for more details.
-.It Dv GLOB_NOMAGIC
-Is the same as
-.Dv GLOB_NOCHECK
-but it only appends the
-.Fa pattern
-if it does not contain any of the special characters ``*'', ``?'' or ``[''.
-.Dv GLOB_NOMAGIC
-is provided to simplify implementing the historic
-.Xr csh 1
-globbing behavior and should probably not be used anywhere else.
-.It Dv GLOB_QUOTE
-Use the backslash
-.Pq Ql \e
-character for quoting: every occurrence of
-a backslash followed by a character in the pattern is replaced by that
-character, avoiding any special interpretation of the character.
-.It Dv GLOB_TILDE
-Expand patterns that start with
-.Ql ~
-to user name home directories.
-.It Dv GLOB_LIMIT
-Limit the total number of returned pathnames to the value provided in
-.Fa gl_matchc
-(default
-.Dv ARG_MAX ) .
-This option should be set for programs
-that can be coerced into a denial of service attack
-via patterns that expand to a very large number of matches,
-such as a long string of
-.Ql */../*/.. .
-.El
-.Pp
-If, during the search, a directory is encountered that cannot be opened
-or read and
-.Fa errfunc
-is
-.Pf non- Dv NULL ,
-.Fn glob
-calls
-.Fa \*(lp*errfunc\*(rp Ns ( Fa path , errno ) .
-This may be unintuitive: a pattern like
-.Ql */Makefile
-will try to
-.Xr stat 2
-.Ql foo/Makefile
-even if
-.Ql foo
-is not a directory, resulting in a
-call to
-.Fa errfunc .
-The error routine can suppress this action by testing for
-.Er ENOENT
-and
-.Er ENOTDIR ;
-however, the
-.Dv GLOB_ERR
-flag will still cause an immediate
-return when this happens.
-.Pp
-If
-.Fa errfunc
-returns non-zero,
-.Fn glob
-stops the scan and returns
-.Dv GLOB_ABEND
-after setting
-.Fa gl_pathc
-and
-.Fa gl_pathv
-to reflect any paths already matched.
-This also happens if an error is encountered and
-.Dv GLOB_ERR
-is set in
-.Fa flags ,
-regardless of the return value of
-.Fa errfunc ,
-if called.
-If
-.Dv GLOB_ERR
-is not set and either
-.Fa errfunc
-is
-.Dv NULL
-or
-.Fa errfunc
-returns zero, the error is ignored.
-.Pp
-The
-.Fn globfree
-function frees any space associated with
-.Fa pglob
-from a previous call(s) to
-.Fn glob .
-.Sh RETURN VALUES
-On successful completion,
-.Fn glob
-returns zero.
-In addition the fields of
-.Fa pglob
-contain the values described below:
-.Bl -tag -width GLOB_NOCHECK
-.It Fa gl_pathc
-contains the total number of matched pathnames so far.
-This includes other matches from previous invocations of
-.Fn glob
-if
-.Dv GLOB_APPEND
-was specified.
-.It Fa gl_matchc
-contains the number of matched pathnames in the current invocation of
-.Fn glob .
-.It Fa gl_flags
-contains a copy of the
-.Fa flags
-parameter with the bit
-.Dv GLOB_MAGCHAR
-set if
-.Fa pattern
-contained any of the special characters ``*'', ``?'' or ``['', cleared
-if not.
-.It Fa gl_pathv
-contains a pointer to a
-.Dv NULL Ns -terminated
-list of matched pathnames.
-However, if
-.Fa gl_pathc
-is zero, the contents of
-.Fa gl_pathv
-are undefined.
-.El
-.Pp
-If
-.Fn glob
-terminates due to an error, it sets errno and returns one of the
-following non-zero constants, which are defined in the include
-file
-.Aq Pa glob.h :
-.Bl -tag -width GLOB_NOCHECK
-.It Dv GLOB_NOSPACE
-An attempt to allocate memory failed, or if
-.Fa errno
-was 0
-.Dv GLOB_LIMIT
-was specified in the flags and
-.Fa pglob\->gl_matchc
-or more patterns were matched.
-.It Dv GLOB_ABEND
-The scan was stopped because an error was encountered and either
-.Dv GLOB_ERR
-was set or
-.Fa \*(lp*errfunc\*(rp\*(lp\*(rp
-returned non-zero.
-.El
-.Pp
-The arguments
-.Fa pglob\->gl_pathc
-and
-.Fa pglob\->gl_pathv
-are still set as specified above.
-.Sh EXAMPLES
-A rough equivalent of
-.Ql "ls -l *.c *.h"
-can be obtained with the
-following code:
-.Bd -literal -offset indent
-glob_t g;
-
-g.gl_offs = 2;
-glob("*.c", GLOB_DOOFFS, NULL, &g);
-glob("*.h", GLOB_DOOFFS | GLOB_APPEND, NULL, &g);
-g.gl_pathv[0] = "ls";
-g.gl_pathv[1] = "-l";
-execvp("ls", g.gl_pathv);
-.Ed
-.Sh SEE ALSO
-.Xr sh 1 ,
-.Xr fnmatch 3 ,
-.Xr regexp 3
-.Sh STANDARDS
-The
-.Fn glob
-function is expected to be
-.St -p1003.2
-compatible with the exception
-that the flags
-.Dv GLOB_ALTDIRFUNC ,
-.Dv GLOB_BRACE ,
-.Dv GLOB_LIMIT ,
-.Dv GLOB_MAGCHAR ,
-.Dv GLOB_NOMAGIC ,
-.Dv GLOB_QUOTE ,
-and
-.Dv GLOB_TILDE ,
-and the fields
-.Fa gl_matchc
-and
-.Fa gl_flags
-should not be used by applications striving for strict
-.Tn POSIX
-conformance.
-.Sh HISTORY
-The
-.Fn glob
-and
-.Fn globfree
-functions first appeared in
-.Bx 4.4 .
-.Sh BUGS
-Patterns longer than
-.Dv MAXPATHLEN
-may cause unchecked errors.
-.Pp
-The
-.Fn glob
-argument
-may fail and set errno for any of the errors specified for the
-library routines
-.Xr stat 2 ,
-.Xr closedir 3 ,
-.Xr opendir 3 ,
-.Xr readdir 3 ,
-.Xr malloc 3 ,
-and
-.Xr free 3 .
diff --git a/newlib/libc/sys/linux/stdlib/glob.c b/newlib/libc/sys/linux/stdlib/glob.c
deleted file mode 100644
index e40f12c20..000000000
--- a/newlib/libc/sys/linux/stdlib/glob.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * Copyright (c) 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Guido van Rossum.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)glob.c	8.3 (Berkeley) 10/13/93";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/gen/glob.c,v 1.19 2002/02/01 01:32:19 obrien Exp $");
-
-/*
- * glob(3) -- a superset of the one defined in POSIX 1003.2.
- *
- * The [!...] convention to negate a range is supported (SysV, Posix, ksh).
- *
- * Optional extra services, controlled by flags not defined by POSIX:
- *
- * GLOB_QUOTE:
- *	Escaping convention: \ inhibits any special meaning the following
- *	character might have (except \ at end of string is retained).
- * GLOB_MAGCHAR:
- *	Set in gl_flags if pattern contained a globbing character.
- * GLOB_NOMAGIC:
- *	Same as GLOB_NOCHECK, but it will only append pattern if it did
- *	not contain any magic characters.  [Used in csh style globbing]
- * GLOB_ALTDIRFUNC:
- *	Use alternately specified directory access functions.
- * GLOB_TILDE:
- *	expand ~user/foo to the /home/dir/of/user/foo
- * GLOB_BRACE:
- *	expand {1,2}{a,b} to 1a 1b 2a 2b
- * gl_matchc:
- *	Number of matches in the current invocation of glob.
- */
-
-#include <sys/param.h>
-#include <sys/stat.h>
-
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <glob.h>
-#include <pwd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "collate.h"
-
-#define	DOLLAR		'$'
-#define	DOT		'.'
-#define	EOS		'\0'
-#define	LBRACKET	'['
-#define	NOT		'!'
-#define	QUESTION	'?'
-#define	QUOTE		'\\'
-#define	RANGE		'-'
-#define	RBRACKET	']'
-#define	SEP		'/'
-#define	STAR		'*'
-#define	TILDE		'~'
-#define	UNDERSCORE	'_'
-#define	LBRACE		'{'
-#define	RBRACE		'}'
-#define	SLASH		'/'
-#define	COMMA		','
-
-#ifndef DEBUG
-
-#define	M_QUOTE		0x8000
-#define	M_PROTECT	0x4000
-#define	M_MASK		0xffff
-#define	M_ASCII		0x00ff
-
-typedef u_short Char;
-
-#else
-
-#define	M_QUOTE		0x80
-#define	M_PROTECT	0x40
-#define	M_MASK		0xff
-#define	M_ASCII		0x7f
-
-typedef char Char;
-
-#endif
-
-
-#define	CHAR(c)		((Char)((c)&M_ASCII))
-#define	META(c)		((Char)((c)|M_QUOTE))
-#define	M_ALL		META('*')
-#define	M_END		META(']')
-#define	M_NOT		META('!')
-#define	M_ONE		META('?')
-#define	M_RNG		META('-')
-#define	M_SET		META('[')
-#define	ismeta(c)	(((c)&M_QUOTE) != 0)
-
-
-static int	 compare(const void *, const void *);
-static int	 g_Ctoc(const Char *, char *, u_int);
-static int	 g_lstat(Char *, struct stat *, glob_t *);
-static DIR	*g_opendir(Char *, glob_t *);
-static Char	*g_strchr(Char *, int);
-#ifdef notdef
-static Char	*g_strcat(Char *, const Char *);
-#endif
-static int	 g_stat(Char *, struct stat *, glob_t *);
-static int	 glob0(const Char *, glob_t *, int *);
-static int	 glob1(Char *, glob_t *, int *);
-static int	 glob2(Char *, Char *, Char *, Char *, glob_t *, int *);
-static int	 glob3(Char *, Char *, Char *, Char *, Char *, glob_t *, int *);
-static int	 globextend(const Char *, glob_t *, int *);
-static const Char *	
-		 globtilde(const Char *, Char *, size_t, glob_t *);
-static int	 globexp1(const Char *, glob_t *, int *);
-static int	 globexp2(const Char *, const Char *, glob_t *, int *, int *);
-static int	 match(Char *, Char *, Char *);
-#ifdef DEBUG
-static void	 qprintf(const char *, Char *);
-#endif
-
-int
-glob(pattern, flags, errfunc, pglob)
-	const char *pattern;
-	int flags, (*errfunc)(const char *, int);
-	glob_t *pglob;
-{
-	const u_char *patnext;
-	int c, limit;
-	Char *bufnext, *bufend, patbuf[MAXPATHLEN];
-
-	patnext = (u_char *) pattern;
-	if (!(flags & GLOB_APPEND)) {
-		pglob->gl_pathc = 0;
-		pglob->gl_pathv = NULL;
-		if (!(flags & GLOB_DOOFFS))
-			pglob->gl_offs = 0;
-	}
-	if (flags & GLOB_LIMIT) {
-		limit = pglob->gl_matchc;
-		if (limit == 0)
-			limit = ARG_MAX;
-	} else
-		limit = 0;
-	pglob->gl_flags = flags & ~GLOB_MAGCHAR;
-	pglob->gl_errfunc = errfunc;
-	pglob->gl_matchc = 0;
-
-	bufnext = patbuf;
-	bufend = bufnext + MAXPATHLEN - 1;
-	if (flags & GLOB_QUOTE) {
-		/* Protect the quoted characters. */
-		while (bufnext < bufend && (c = *patnext++) != EOS)
-			if (c == QUOTE) {
-				if ((c = *patnext++) == EOS) {
-					c = QUOTE;
-					--patnext;
-				}
-				*bufnext++ = c | M_PROTECT;
-			}
-			else
-				*bufnext++ = c;
-	}
-	else
-	    while (bufnext < bufend && (c = *patnext++) != EOS)
-		    *bufnext++ = c;
-	*bufnext = EOS;
-
-	if (flags & GLOB_BRACE)
-	    return globexp1(patbuf, pglob, &limit);
-	else
-	    return glob0(patbuf, pglob, &limit);
-}
-
-/*
- * Expand recursively a glob {} pattern. When there is no more expansion
- * invoke the standard globbing routine to glob the rest of the magic
- * characters
- */
-static int
-globexp1(pattern, pglob, limit)
-	const Char *pattern;
-	glob_t *pglob;
-	int *limit;
-{
-	const Char* ptr = pattern;
-	int rv;
-
-	/* Protect a single {}, for find(1), like csh */
-	if (pattern[0] == LBRACE && pattern[1] == RBRACE && pattern[2] == EOS)
-		return glob0(pattern, pglob, limit);
-
-	while ((ptr = (const Char *) g_strchr((Char *) ptr, LBRACE)) != NULL)
-		if (!globexp2(ptr, pattern, pglob, &rv, limit))
-			return rv;
-
-	return glob0(pattern, pglob, limit);
-}
-
-
-/*
- * Recursive brace globbing helper. Tries to expand a single brace.
- * If it succeeds then it invokes globexp1 with the new pattern.
- * If it fails then it tries to glob the rest of the pattern and returns.
- */
-static int
-globexp2(ptr, pattern, pglob, rv, limit)
-	const Char *ptr, *pattern;
-	glob_t *pglob;
-	int *rv, *limit;
-{
-	int     i;
-	Char   *lm, *ls;
-	const Char *pe, *pm, *pl;
-	Char    patbuf[MAXPATHLEN];
-
-	/* copy part up to the brace */
-	for (lm = patbuf, pm = pattern; pm != ptr; *lm++ = *pm++)
-		continue;
-	*lm = EOS;
-	ls = lm;
-
-	/* Find the balanced brace */
-	for (i = 0, pe = ++ptr; *pe; pe++)
-		if (*pe == LBRACKET) {
-			/* Ignore everything between [] */
-			for (pm = pe++; *pe != RBRACKET && *pe != EOS; pe++)
-				continue;
-			if (*pe == EOS) {
-				/*
-				 * We could not find a matching RBRACKET.
-				 * Ignore and just look for RBRACE
-				 */
-				pe = pm;
-			}
-		}
-		else if (*pe == LBRACE)
-			i++;
-		else if (*pe == RBRACE) {
-			if (i == 0)
-				break;
-			i--;
-		}
-
-	/* Non matching braces; just glob the pattern */
-	if (i != 0 || *pe == EOS) {
-		*rv = glob0(patbuf, pglob, limit);
-		return 0;
-	}
-
-	for (i = 0, pl = pm = ptr; pm <= pe; pm++)
-		switch (*pm) {
-		case LBRACKET:
-			/* Ignore everything between [] */
-			for (pl = pm++; *pm != RBRACKET && *pm != EOS; pm++)
-				continue;
-			if (*pm == EOS) {
-				/*
-				 * We could not find a matching RBRACKET.
-				 * Ignore and just look for RBRACE
-				 */
-				pm = pl;
-			}
-			break;
-
-		case LBRACE:
-			i++;
-			break;
-
-		case RBRACE:
-			if (i) {
-			    i--;
-			    break;
-			}
-			/* FALLTHROUGH */
-		case COMMA:
-			if (i && *pm == COMMA)
-				break;
-			else {
-				/* Append the current string */
-				for (lm = ls; (pl < pm); *lm++ = *pl++)
-					continue;
-				/*
-				 * Append the rest of the pattern after the
-				 * closing brace
-				 */
-				for (pl = pe + 1; (*lm++ = *pl++) != EOS;)
-					continue;
-
-				/* Expand the current pattern */
-#ifdef DEBUG
-				qprintf("globexp2:", patbuf);
-#endif
-				*rv = globexp1(patbuf, pglob, limit);
-
-				/* move after the comma, to the next string */
-				pl = pm + 1;
-			}
-			break;
-
-		default:
-			break;
-		}
-	*rv = 0;
-	return 0;
-}
-
-
-
-/*
- * expand tilde from the passwd file.
- */
-static const Char *
-globtilde(pattern, patbuf, patbuf_len, pglob)
-	const Char *pattern;
-	Char *patbuf;
-	size_t patbuf_len;
-	glob_t *pglob;
-{
-	struct passwd *pwd;
-	char *h;
-	const Char *p;
-	Char *b, *eb;
-
-	if (*pattern != TILDE || !(pglob->gl_flags & GLOB_TILDE))
-		return pattern;
-
-	/* 
-	 * Copy up to the end of the string or / 
-	 */
-	eb = &patbuf[patbuf_len - 1];
-	for (p = pattern + 1, h = (char *) patbuf;
-	    h < (char *)eb && *p && *p != SLASH; *h++ = *p++)
-		continue;
-
-	*h = EOS;
-
-	if (((char *) patbuf)[0] == EOS) {
-		/*
-		 * handle a plain ~ or ~/ by expanding $HOME first (iff
-		 * we're not running setuid or setgid) and then trying
-		 * the password file
-		 */
-		if (
-#ifndef	__NETBSD_SYSCALLS
-		    issetugid() != 0 ||
-#endif
-		    (h = getenv("HOME")) == NULL) {
-/* If we are not EL/IX level 4, we cannot use getpwxxx interfaces */
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-			if (((h = getlogin()) != NULL &&
-			     (pwd = getpwnam(h)) != NULL) ||
-			    (pwd = getpwuid(getuid())) != NULL)
-				h = pwd->pw_dir;
-			else
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 4 */
-				return pattern;
-		}
-	}
-	else {
-		/*
-		 * Expand a ~user
-		 */
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-		if ((pwd = getpwnam((char*) patbuf)) != NULL)
-			h = pwd->pw_dir;
-		else
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 4 */
-			return pattern;
-	}
-
-	/* Copy the home directory */
-	for (b = patbuf; b < eb && *h; *b++ = *h++)
-		continue;
-
-	/* Append the rest of the pattern */
-	while (b < eb && (*b++ = *p++) != EOS)
-		continue;
-	*b = EOS;
-
-	return patbuf;
-}
-
-
-/*
- * The main glob() routine: compiles the pattern (optionally processing
- * quotes), calls glob1() to do the real pattern matching, and finally
- * sorts the list (unless unsorted operation is requested).  Returns 0
- * if things went well, nonzero if errors occurred.  It is not an error
- * to find no matches.
- */
-static int
-glob0(pattern, pglob, limit)
-	const Char *pattern;
-	glob_t *pglob;
-	int *limit;
-{
-	const Char *qpatnext;
-	int c, err, oldpathc;
-	Char *bufnext, patbuf[MAXPATHLEN];
-
-	qpatnext = globtilde(pattern, patbuf, MAXPATHLEN, pglob);
-	oldpathc = pglob->gl_pathc;
-	bufnext = patbuf;
-
-	/* We don't need to check for buffer overflow any more. */
-	while ((c = *qpatnext++) != EOS) {
-		switch (c) {
-		case LBRACKET:
-			c = *qpatnext;
-			if (c == NOT)
-				++qpatnext;
-			if (*qpatnext == EOS ||
-			    g_strchr((Char *) qpatnext+1, RBRACKET) == NULL) {
-				*bufnext++ = LBRACKET;
-				if (c == NOT)
-					--qpatnext;
-				break;
-			}
-			*bufnext++ = M_SET;
-			if (c == NOT)
-				*bufnext++ = M_NOT;
-			c = *qpatnext++;
-			do {
-				*bufnext++ = CHAR(c);
-				if (*qpatnext == RANGE &&
-				    (c = qpatnext[1]) != RBRACKET) {
-					*bufnext++ = M_RNG;
-					*bufnext++ = CHAR(c);
-					qpatnext += 2;
-				}
-			} while ((c = *qpatnext++) != RBRACKET);
-			pglob->gl_flags |= GLOB_MAGCHAR;
-			*bufnext++ = M_END;
-			break;
-		case QUESTION:
-			pglob->gl_flags |= GLOB_MAGCHAR;
-			*bufnext++ = M_ONE;
-			break;
-		case STAR:
-			pglob->gl_flags |= GLOB_MAGCHAR;
-			/* collapse adjacent stars to one,
-			 * to avoid exponential behavior
-			 */
-			if (bufnext == patbuf || bufnext[-1] != M_ALL)
-			    *bufnext++ = M_ALL;
-			break;
-		default:
-			*bufnext++ = CHAR(c);
-			break;
-		}
-	}
-	*bufnext = EOS;
-#ifdef DEBUG
-	qprintf("glob0:", patbuf);
-#endif
-
-	if ((err = glob1(patbuf, pglob, limit)) != 0)
-		return(err);
-
-	/*
-	 * If there was no match we are going to append the pattern
-	 * if GLOB_NOCHECK was specified or if GLOB_NOMAGIC was specified
-	 * and the pattern did not contain any magic characters
-	 * GLOB_NOMAGIC is there just for compatibility with csh.
-	 */
-	if (pglob->gl_pathc == oldpathc &&
-	    ((pglob->gl_flags & GLOB_NOCHECK) ||
-	      ((pglob->gl_flags & GLOB_NOMAGIC) &&
-	       !(pglob->gl_flags & GLOB_MAGCHAR))))
-		return(globextend(pattern, pglob, limit));
-	else if (!(pglob->gl_flags & GLOB_NOSORT))
-		qsort(pglob->gl_pathv + pglob->gl_offs + oldpathc,
-		    pglob->gl_pathc - oldpathc, sizeof(char *), compare);
-	return(0);
-}
-
-static int
-compare(p, q)
-	const void *p, *q;
-{
-	return(strcmp(*(char **)p, *(char **)q));
-}
-
-static int
-glob1(pattern, pglob, limit)
-	Char *pattern;
-	glob_t *pglob;
-	int *limit;
-{
-	Char pathbuf[MAXPATHLEN];
-
-	/* A null pathname is invalid -- POSIX 1003.1 sect. 2.4. */
-	if (*pattern == EOS)
-		return(0);
-	return(glob2(pathbuf, pathbuf, pathbuf + MAXPATHLEN - 1,
-	    pattern, pglob, limit));
-}
-
-/*
- * The functions glob2 and glob3 are mutually recursive; there is one level
- * of recursion for each segment in the pattern that contains one or more
- * meta characters.
- */
-static int
-glob2(pathbuf, pathend, pathend_last, pattern, pglob, limit)
-	Char *pathbuf, *pathend, *pathend_last, *pattern;
-	glob_t *pglob;
-	int *limit;
-{
-	struct stat sb;
-	Char *p, *q;
-	int anymeta;
-
-	/*
-	 * Loop over pattern segments until end of pattern or until
-	 * segment with meta character found.
-	 */
-	for (anymeta = 0;;) {
-		if (*pattern == EOS) {		/* End of pattern? */
-			*pathend = EOS;
-			if (g_lstat(pathbuf, &sb, pglob))
-				return(0);
-
-			if (((pglob->gl_flags & GLOB_MARK) &&
-			    pathend[-1] != SEP) && (S_ISDIR(sb.st_mode)
-			    || (S_ISLNK(sb.st_mode) &&
-			    (g_stat(pathbuf, &sb, pglob) == 0) &&
-			    S_ISDIR(sb.st_mode)))) {
-				if (pathend + 1 > pathend_last)
-					return (1);
-				*pathend++ = SEP;
-				*pathend = EOS;
-			}
-			++pglob->gl_matchc;
-			return(globextend(pathbuf, pglob, limit));
-		}
-
-		/* Find end of next segment, copy tentatively to pathend. */
-		q = pathend;
-		p = pattern;
-		while (*p != EOS && *p != SEP) {
-			if (ismeta(*p))
-				anymeta = 1;
-			if (q + 1 > pathend_last)
-				return (1);
-			*q++ = *p++;
-		}
-
-		if (!anymeta) {		/* No expansion, do next segment. */
-			pathend = q;
-			pattern = p;
-			while (*pattern == SEP) {
-				if (pathend + 1 > pathend_last)
-					return (1);
-				*pathend++ = *pattern++;
-			}
-		} else			/* Need expansion, recurse. */
-			return(glob3(pathbuf, pathend, pathend_last, pattern, p,
-			    pglob, limit));
-	}
-	/* NOTREACHED */
-}
-
-static int
-glob3(pathbuf, pathend, pathend_last, pattern, restpattern, pglob, limit)
-	Char *pathbuf, *pathend, *pathend_last, *pattern, *restpattern;
-	glob_t *pglob;
-	int *limit;
-{
-	struct dirent *dp;
-	DIR *dirp;
-	int err;
-	char buf[MAXPATHLEN];
-
-	/*
-	 * The readdirfunc declaration can't be prototyped, because it is
-	 * assigned, below, to two functions which are prototyped in glob.h
-	 * and dirent.h as taking pointers to differently typed opaque
-	 * structures.
-	 */
-	struct dirent *(*readdirfunc)();
-
-	if (pathend > pathend_last)
-		return (1);
-	*pathend = EOS;
-	errno = 0;
-
-	if ((dirp = g_opendir(pathbuf, pglob)) == NULL) {
-		/* TODO: don't call for ENOENT or ENOTDIR? */
-		if (pglob->gl_errfunc) {
-			if (g_Ctoc(pathbuf, buf, sizeof(buf)))
-				return (GLOB_ABEND);
-			if (pglob->gl_errfunc(buf, errno) ||
-			    pglob->gl_flags & GLOB_ERR)
-				return (GLOB_ABEND);
-		}
-		return(0);
-	}
-
-	err = 0;
-
-	/* Search directory for matching names. */
-	if (pglob->gl_flags & GLOB_ALTDIRFUNC)
-		readdirfunc = pglob->gl_readdir;
-	else
-		readdirfunc = readdir;
-	while ((dp = (*readdirfunc)(dirp))) {
-		u_char *sc;
-		Char *dc;
-
-		/* Initial DOT must be matched literally. */
-		if (dp->d_name[0] == DOT && *pattern != DOT)
-			continue;
-		dc = pathend;
-		sc = (u_char *) dp->d_name;
-		while (dc < pathend_last && (*dc++ = *sc++) != EOS)
-			;
-		if (!match(pathend, pattern, restpattern)) {
-			*pathend = EOS;
-			continue;
-		}
-		err = glob2(pathbuf, --dc, pathend_last, restpattern,
-		    pglob, limit);
-		if (err)
-			break;
-	}
-
-	if (pglob->gl_flags & GLOB_ALTDIRFUNC)
-		(*pglob->gl_closedir)(dirp);
-	else
-		closedir(dirp);
-	return(err);
-}
-
-
-/*
- * Extend the gl_pathv member of a glob_t structure to accomodate a new item,
- * add the new item, and update gl_pathc.
- *
- * This assumes the BSD realloc, which only copies the block when its size
- * crosses a power-of-two boundary; for v7 realloc, this would cause quadratic
- * behavior.
- *
- * Return 0 if new item added, error code if memory couldn't be allocated.
- *
- * Invariant of the glob_t structure:
- *	Either gl_pathc is zero and gl_pathv is NULL; or gl_pathc > 0 and
- *	gl_pathv points to (gl_offs + gl_pathc + 1) items.
- */
-static int
-globextend(path, pglob, limit)
-	const Char *path;
-	glob_t *pglob;
-	int *limit;
-{
-	char **pathv;
-	int i;
-	u_int newsize, len;
-	char *copy;
-	const Char *p;
-
-	if (*limit && pglob->gl_pathc > *limit) {
-		errno = 0;
-		return (GLOB_NOSPACE);
-	}
-
-	newsize = sizeof(*pathv) * (2 + pglob->gl_pathc + pglob->gl_offs);
-	pathv = pglob->gl_pathv ?
-		    realloc((char *)pglob->gl_pathv, newsize) :
-		    malloc(newsize);
-	if (pathv == NULL) {
-		if (pglob->gl_pathv) {
-			free(pglob->gl_pathv);
-			pglob->gl_pathv = NULL;
-		}
-		return(GLOB_NOSPACE);
-	}
-
-	if (pglob->gl_pathv == NULL && pglob->gl_offs > 0) {
-		/* first time around -- clear initial gl_offs items */
-		pathv += pglob->gl_offs;
-		for (i = pglob->gl_offs; --i >= 0; )
-			*--pathv = NULL;
-	}
-	pglob->gl_pathv = pathv;
-
-	for (p = path; *p++;)
-		continue;
-	len = (size_t)(p - path);
-	if ((copy = malloc(len)) != NULL) {
-		if (g_Ctoc(path, copy, len)) {
-			free(copy);
-			return (GLOB_NOSPACE);
-		}
-		pathv[pglob->gl_offs + pglob->gl_pathc++] = copy;
-	}
-	pathv[pglob->gl_offs + pglob->gl_pathc] = NULL;
-	return(copy == NULL ? GLOB_NOSPACE : 0);
-}
-
-/*
- * pattern matching function for filenames.  Each occurrence of the *
- * pattern causes a recursion level.
- */
-static int
-match(name, pat, patend)
-	Char *name, *pat, *patend;
-{
-	int ok, negate_range;
-	Char c, k;
-
-	while (pat < patend) {
-		c = *pat++;
-		switch (c & M_MASK) {
-		case M_ALL:
-			if (pat == patend)
-				return(1);
-			do
-			    if (match(name, pat, patend))
-				    return(1);
-			while (*name++ != EOS);
-			return(0);
-		case M_ONE:
-			if (*name++ == EOS)
-				return(0);
-			break;
-		case M_SET:
-			ok = 0;
-			if ((k = *name++) == EOS)
-				return(0);
-			if ((negate_range = ((*pat & M_MASK) == M_NOT)) != EOS)
-				++pat;
-			while (((c = *pat++) & M_MASK) != M_END)
-				if ((*pat & M_MASK) == M_RNG) {
-					if (__collate_load_error ?
-					    CHAR(c) <= CHAR(k) && CHAR(k) <= CHAR(pat[1]) :
-					       __collate_range_cmp(CHAR(c), CHAR(k)) <= 0
-					    && __collate_range_cmp(CHAR(k), CHAR(pat[1])) <= 0
-					   )
-						ok = 1;
-					pat += 2;
-				} else if (c == k)
-					ok = 1;
-			if (ok == negate_range)
-				return(0);
-			break;
-		default:
-			if (*name++ != c)
-				return(0);
-			break;
-		}
-	}
-	return(*name == EOS);
-}
-
-/* Free allocated data belonging to a glob_t structure. */
-void
-globfree(pglob)
-	glob_t *pglob;
-{
-	int i;
-	char **pp;
-
-	if (pglob->gl_pathv != NULL) {
-		pp = pglob->gl_pathv + pglob->gl_offs;
-		for (i = pglob->gl_pathc; i--; ++pp)
-			if (*pp)
-				free(*pp);
-		free(pglob->gl_pathv);
-		pglob->gl_pathv = NULL;
-	}
-}
-
-static DIR *
-g_opendir(str, pglob)
-	Char *str;
-	glob_t *pglob;
-{
-	char buf[MAXPATHLEN];
-
-	if (!*str)
-		strcpy(buf, ".");
-	else {
-		if (g_Ctoc(str, buf, sizeof(buf)))
-			return (NULL);
-	}
-
-	if (pglob->gl_flags & GLOB_ALTDIRFUNC)
-		return((*pglob->gl_opendir)(buf));
-
-	return(opendir(buf));
-}
-
-static int
-g_lstat(fn, sb, pglob)
-	Char *fn;
-	struct stat *sb;
-	glob_t *pglob;
-{
-	char buf[MAXPATHLEN];
-
-	if (g_Ctoc(fn, buf, sizeof(buf))) {
-		errno = ENAMETOOLONG;
-		return (-1);
-	}
-	if (pglob->gl_flags & GLOB_ALTDIRFUNC)
-		return((*pglob->gl_lstat)(buf, sb));
-	return(lstat(buf, sb));
-}
-
-static int
-g_stat(fn, sb, pglob)
-	Char *fn;
-	struct stat *sb;
-	glob_t *pglob;
-{
-	char buf[MAXPATHLEN];
-
-	if (g_Ctoc(fn, buf, sizeof(buf))) {
-		errno = ENAMETOOLONG;
-		return (-1);
-	}
-	if (pglob->gl_flags & GLOB_ALTDIRFUNC)
-		return((*pglob->gl_stat)(buf, sb));
-	return(stat(buf, sb));
-}
-
-static Char *
-g_strchr(str, ch)
-	Char *str;
-	int ch;
-{
-	do {
-		if (*str == ch)
-			return (str);
-	} while (*str++);
-	return (NULL);
-}
-
-static int
-g_Ctoc(str, buf, len)
-	const Char *str;
-	char *buf;
-	u_int len;
-{
-
-	while (len--) {
-		if ((*buf++ = *str++) == '\0')
-			return (0);
-	}
-	return (1);
-}
-
-#ifdef DEBUG
-static void
-qprintf(str, s)
-	const char *str;
-	Char *s;
-{
-	Char *p;
-
-	(void)printf("%s:\n", str);
-	for (p = s; *p; p++)
-		(void)printf("%c", CHAR(*p));
-	(void)printf("\n");
-	for (p = s; *p; p++)
-		(void)printf("%c", *p & M_PROTECT ? '"' : ' ');
-	(void)printf("\n");
-	for (p = s; *p; p++)
-		(void)printf("%c", ismeta(*p) ? '_' : ' ');
-	(void)printf("\n");
-}
-#endif
diff --git a/newlib/libc/sys/linux/stdlib/reallocf.c b/newlib/libc/sys/linux/stdlib/reallocf.c
deleted file mode 100644
index d50200622..000000000
--- a/newlib/libc/sys/linux/stdlib/reallocf.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*-
- * Copyright (c) 1998, M. Warner Losh <imp@freebsd.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/stdlib/reallocf.c,v 1.4 2002/03/22 21:53:10 obrien Exp $");
-
-#include <stdlib.h>
-
-void *
-reallocf(void *ptr, size_t size)
-{
-	void *nptr;
-
-	nptr = realloc(ptr, size);
-	if (!nptr && ptr)
-		free(ptr);
-	return (nptr);
-}
diff --git a/newlib/libc/sys/linux/stdlib/regcomp.c b/newlib/libc/sys/linux/stdlib/regcomp.c
deleted file mode 100644
index 8a3886964..000000000
--- a/newlib/libc/sys/linux/stdlib/regcomp.c
+++ /dev/null
@@ -1,2089 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regcomp.c	8.5 (Berkeley) 3/20/94
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)regcomp.c	8.5 (Berkeley) 3/20/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/regex/regcomp.c,v 1.27 2002/03/22 21:52:47 obrien Exp $");
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <regex.h>
-
-#include "collate.h"
-
-#include "utils.h"
-#include "regex2.h"
-
-#include "cclass.h"
-#include "cname.h"
-
-/*
- * parse structure, passed up and down to avoid global variables and
- * other clumsinesses
- */
-struct parse {
-	char *next;		/* next character in RE */
-	char *end;		/* end of string (-> NUL normally) */
-	int error;		/* has an error been seen? */
-	sop *strip;		/* malloced strip */
-	sopno ssize;		/* malloced strip size (allocated) */
-	sopno slen;		/* malloced strip length (used) */
-	int ncsalloc;		/* number of csets allocated */
-	struct re_guts *g;
-#	define	NPAREN	10	/* we need to remember () 1-9 for back refs */
-	sopno pbegin[NPAREN];	/* -> ( ([0] unused) */
-	sopno pend[NPAREN];	/* -> ) ([0] unused) */
-};
-
-/* ========= begin header generated by ./mkh ========= */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* === regcomp.c === */
-static void p_ere(struct parse *p, int stop);
-static void p_ere_exp(struct parse *p);
-static void p_str(struct parse *p);
-static void p_bre(struct parse *p, int end1, int end2);
-static int p_simp_re(struct parse *p, int starordinary);
-static int p_count(struct parse *p);
-static void p_bracket(struct parse *p);
-static void p_b_term(struct parse *p, cset *cs);
-static void p_b_cclass(struct parse *p, cset *cs);
-static void p_b_eclass(struct parse *p, cset *cs);
-static char p_b_symbol(struct parse *p);
-static char p_b_coll_elem(struct parse *p, int endc);
-static char othercase(int ch);
-static void bothcases(struct parse *p, int ch);
-static void ordinary(struct parse *p, int ch);
-static void nonnewline(struct parse *p);
-static void repeat(struct parse *p, sopno start, int from, int to);
-static int seterr(struct parse *p, int e);
-static cset *allocset(struct parse *p);
-static void freeset(struct parse *p, cset *cs);
-static int freezeset(struct parse *p, cset *cs);
-static int firstch(struct parse *p, cset *cs);
-static int nch(struct parse *p, cset *cs);
-static void mcadd(struct parse *p, cset *cs, char *cp);
-#if used
-static void mcsub(cset *cs, char *cp);
-static int mcin(cset *cs, char *cp);
-static char *mcfind(cset *cs, char *cp);
-#endif
-static void mcinvert(struct parse *p, cset *cs);
-static void mccase(struct parse *p, cset *cs);
-static int isinsets(struct re_guts *g, int c);
-static int samesets(struct re_guts *g, int c1, int c2);
-static void categorize(struct parse *p, struct re_guts *g);
-static sopno dupl(struct parse *p, sopno start, sopno finish);
-static void doemit(struct parse *p, sop op, size_t opnd);
-static void doinsert(struct parse *p, sop op, size_t opnd, sopno pos);
-static void dofwd(struct parse *p, sopno pos, sop value);
-static void enlarge(struct parse *p, sopno size);
-static void stripsnug(struct parse *p, struct re_guts *g);
-static void findmust(struct parse *p, struct re_guts *g);
-static int altoffset(sop *scan, int offset, int mccs);
-static void computejumps(struct parse *p, struct re_guts *g);
-static void computematchjumps(struct parse *p, struct re_guts *g);
-static sopno pluscount(struct parse *p, struct re_guts *g);
-
-#ifdef __cplusplus
-}
-#endif
-/* ========= end header generated by ./mkh ========= */
-
-static char nuls[10];		/* place to point scanner in event of error */
-
-/*
- * macros for use with parse structure
- * BEWARE:  these know that the parse structure is named `p' !!!
- */
-#define	PEEK()	(*p->next)
-#define	PEEK2()	(*(p->next+1))
-#define	MORE()	(p->next < p->end)
-#define	MORE2()	(p->next+1 < p->end)
-#define	SEE(c)	(MORE() && PEEK() == (c))
-#define	SEETWO(a, b)	(MORE() && MORE2() && PEEK() == (a) && PEEK2() == (b))
-#define	EAT(c)	((SEE(c)) ? (NEXT(), 1) : 0)
-#define	EATTWO(a, b)	((SEETWO(a, b)) ? (NEXT2(), 1) : 0)
-#define	NEXT()	(p->next++)
-#define	NEXT2()	(p->next += 2)
-#define	NEXTn(n)	(p->next += (n))
-#define	GETNEXT()	(*p->next++)
-#define	SETERROR(e)	seterr(p, (e))
-#define	REQUIRE(co, e)	((co) || SETERROR(e))
-#define	MUSTSEE(c, e)	(REQUIRE(MORE() && PEEK() == (c), e))
-#define	MUSTEAT(c, e)	(REQUIRE(MORE() && GETNEXT() == (c), e))
-#define	MUSTNOTSEE(c, e)	(REQUIRE(!MORE() || PEEK() != (c), e))
-#define	EMIT(op, sopnd)	doemit(p, (sop)(op), (size_t)(sopnd))
-#define	INSERT(op, pos)	doinsert(p, (sop)(op), HERE()-(pos)+1, pos)
-#define	AHEAD(pos)		dofwd(p, pos, HERE()-(pos))
-#define	ASTERN(sop, pos)	EMIT(sop, HERE()-pos)
-#define	HERE()		(p->slen)
-#define	THERE()		(p->slen - 1)
-#define	THERETHERE()	(p->slen - 2)
-#define	DROP(n)	(p->slen -= (n))
-
-#ifndef NDEBUG
-static int never = 0;		/* for use in asserts; shuts lint up */
-#else
-#define	never	0		/* some <assert.h>s have bugs too */
-#endif
-
-/* Macro used by computejump()/computematchjump() */
-#define MIN(a,b)	((a)<(b)?(a):(b))
-
-/*
- - regcomp - interface for parser and compilation
- = extern int regcomp(regex_t *, const char *, int);
- = #define	REG_BASIC	0000
- = #define	REG_EXTENDED	0001
- = #define	REG_ICASE	0002
- = #define	REG_NOSUB	0004
- = #define	REG_NEWLINE	0010
- = #define	REG_NOSPEC	0020
- = #define	REG_PEND	0040
- = #define	REG_DUMP	0200
- */
-int				/* 0 success, otherwise REG_something */
-regcomp(preg, pattern, cflags)
-regex_t *preg;
-const char *pattern;
-int cflags;
-{
-	struct parse pa;
-	struct re_guts *g;
-	struct parse *p = &pa;
-	int i;
-	size_t len;
-#ifdef REDEBUG
-#	define	GOODFLAGS(f)	(f)
-#else
-#	define	GOODFLAGS(f)	((f)&~REG_DUMP)
-#endif
-
-	cflags = GOODFLAGS(cflags);
-	if ((cflags&REG_EXTENDED) && (cflags&REG_NOSPEC))
-		return(REG_INVARG);
-
-	if (cflags&REG_PEND) {
-		if (preg->re_endp < pattern)
-			return(REG_INVARG);
-		len = preg->re_endp - pattern;
-	} else
-		len = strlen((char *)pattern);
-
-	/* do the mallocs early so failure handling is easy */
-	g = (struct re_guts *)malloc(sizeof(struct re_guts) +
-							(NC-1)*sizeof(cat_t));
-	if (g == NULL)
-		return(REG_ESPACE);
-	p->ssize = len/(size_t)2*(size_t)3 + (size_t)1;	/* ugh */
-	p->strip = (sop *)malloc(p->ssize * sizeof(sop));
-	p->slen = 0;
-	if (p->strip == NULL) {
-		free((char *)g);
-		return(REG_ESPACE);
-	}
-
-	/* set things up */
-	p->g = g;
-	p->next = (char *)pattern;	/* convenience; we do not modify it */
-	p->end = p->next + len;
-	p->error = 0;
-	p->ncsalloc = 0;
-	for (i = 0; i < NPAREN; i++) {
-		p->pbegin[i] = 0;
-		p->pend[i] = 0;
-	}
-	g->csetsize = NC;
-	g->sets = NULL;
-	g->setbits = NULL;
-	g->ncsets = 0;
-	g->cflags = cflags;
-	g->iflags = 0;
-	g->nbol = 0;
-	g->neol = 0;
-	g->must = NULL;
-	g->moffset = -1;
-	g->charjump = NULL;
-	g->matchjump = NULL;
-	g->mlen = 0;
-	g->nsub = 0;
-	g->ncategories = 1;	/* category 0 is "everything else" */
-	g->categories = &g->catspace[-(CHAR_MIN)];
-	(void) memset((char *)g->catspace, 0, NC*sizeof(cat_t));
-	g->backrefs = 0;
-
-	/* do it */
-	EMIT(OEND, 0);
-	g->firststate = THERE();
-	if (cflags&REG_EXTENDED)
-		p_ere(p, OUT);
-	else if (cflags&REG_NOSPEC)
-		p_str(p);
-	else
-		p_bre(p, OUT, OUT);
-	EMIT(OEND, 0);
-	g->laststate = THERE();
-
-	/* tidy up loose ends and fill things in */
-	categorize(p, g);
-	stripsnug(p, g);
-	findmust(p, g);
-	/* only use Boyer-Moore algorithm if the pattern is bigger
-	 * than three characters
-	 */
-	if(g->mlen > 3) {
-		computejumps(p, g);
-		computematchjumps(p, g);
-		if(g->matchjump == NULL && g->charjump != NULL) {
-			free(g->charjump);
-			g->charjump = NULL;
-		}
-	}
-	g->nplus = pluscount(p, g);
-	g->magic = MAGIC2;
-	preg->re_nsub = g->nsub;
-	preg->re_g = g;
-	preg->re_magic = MAGIC1;
-#ifndef REDEBUG
-	/* not debugging, so can't rely on the assert() in regexec() */
-	if (g->iflags&BAD)
-		SETERROR(REG_ASSERT);
-#endif
-
-	/* win or lose, we're done */
-	if (p->error != 0)	/* lose */
-		regfree(preg);
-	return(p->error);
-}
-
-/*
- - p_ere - ERE parser top level, concatenation and alternation
- == static void p_ere(struct parse *p, int stop);
- */
-static void
-p_ere(p, stop)
-struct parse *p;
-int stop;			/* character this ERE should end at */
-{
-	char c;
-	sopno prevback;
-	sopno prevfwd;
-	sopno conc;
-	int first = 1;		/* is this the first alternative? */
-
-	for (;;) {
-		/* do a bunch of concatenated expressions */
-		conc = HERE();
-		while (MORE() && (c = PEEK()) != '|' && c != stop)
-			p_ere_exp(p);
-		(void)REQUIRE(HERE() != conc, REG_EMPTY);	/* require nonempty */
-
-		if (!EAT('|'))
-			break;		/* NOTE BREAK OUT */
-
-		if (first) {
-			INSERT(OCH_, conc);	/* offset is wrong */
-			prevfwd = conc;
-			prevback = conc;
-			first = 0;
-		}
-		ASTERN(OOR1, prevback);
-		prevback = THERE();
-		AHEAD(prevfwd);			/* fix previous offset */
-		prevfwd = HERE();
-		EMIT(OOR2, 0);			/* offset is very wrong */
-	}
-
-	if (!first) {		/* tail-end fixups */
-		AHEAD(prevfwd);
-		ASTERN(O_CH, prevback);
-	}
-
-	assert(!MORE() || SEE(stop));
-}
-
-/*
- - p_ere_exp - parse one subERE, an atom possibly followed by a repetition op
- == static void p_ere_exp(struct parse *p);
- */
-static void
-p_ere_exp(p)
-struct parse *p;
-{
-	char c;
-	sopno pos;
-	int count;
-	int count2;
-	sopno subno;
-	int wascaret = 0;
-
-	assert(MORE());		/* caller should have ensured this */
-	c = GETNEXT();
-
-	pos = HERE();
-	switch (c) {
-	case '(':
-		(void)REQUIRE(MORE(), REG_EPAREN);
-		p->g->nsub++;
-		subno = p->g->nsub;
-		if (subno < NPAREN)
-			p->pbegin[subno] = HERE();
-		EMIT(OLPAREN, subno);
-		if (!SEE(')'))
-			p_ere(p, ')');
-		if (subno < NPAREN) {
-			p->pend[subno] = HERE();
-			assert(p->pend[subno] != 0);
-		}
-		EMIT(ORPAREN, subno);
-		(void)MUSTEAT(')', REG_EPAREN);
-		break;
-#ifndef POSIX_MISTAKE
-	case ')':		/* happens only if no current unmatched ( */
-		/*
-		 * You may ask, why the ifndef?  Because I didn't notice
-		 * this until slightly too late for 1003.2, and none of the
-		 * other 1003.2 regular-expression reviewers noticed it at
-		 * all.  So an unmatched ) is legal POSIX, at least until
-		 * we can get it fixed.
-		 */
-		SETERROR(REG_EPAREN);
-		break;
-#endif
-	case '^':
-		EMIT(OBOL, 0);
-		p->g->iflags |= USEBOL;
-		p->g->nbol++;
-		wascaret = 1;
-		break;
-	case '$':
-		EMIT(OEOL, 0);
-		p->g->iflags |= USEEOL;
-		p->g->neol++;
-		break;
-	case '|':
-		SETERROR(REG_EMPTY);
-		break;
-	case '*':
-	case '+':
-	case '?':
-		SETERROR(REG_BADRPT);
-		break;
-	case '.':
-		if (p->g->cflags&REG_NEWLINE)
-			nonnewline(p);
-		else
-			EMIT(OANY, 0);
-		break;
-	case '[':
-		p_bracket(p);
-		break;
-	case '\\':
-		(void)REQUIRE(MORE(), REG_EESCAPE);
-		c = GETNEXT();
-		ordinary(p, c);
-		break;
-	case '{':		/* okay as ordinary except if digit follows */
-		(void)REQUIRE(!MORE() || !isdigit((uch)PEEK()), REG_BADRPT);
-		/* FALLTHROUGH */
-	default:
-		ordinary(p, c);
-		break;
-	}
-
-	if (!MORE())
-		return;
-	c = PEEK();
-	/* we call { a repetition if followed by a digit */
-	if (!( c == '*' || c == '+' || c == '?' ||
-				(c == '{' && MORE2() && isdigit((uch)PEEK2())) ))
-		return;		/* no repetition, we're done */
-	NEXT();
-
-	(void)REQUIRE(!wascaret, REG_BADRPT);
-	switch (c) {
-	case '*':	/* implemented as +? */
-		/* this case does not require the (y|) trick, noKLUDGE */
-		INSERT(OPLUS_, pos);
-		ASTERN(O_PLUS, pos);
-		INSERT(OQUEST_, pos);
-		ASTERN(O_QUEST, pos);
-		break;
-	case '+':
-		INSERT(OPLUS_, pos);
-		ASTERN(O_PLUS, pos);
-		break;
-	case '?':
-		/* KLUDGE: emit y? as (y|) until subtle bug gets fixed */
-		INSERT(OCH_, pos);		/* offset slightly wrong */
-		ASTERN(OOR1, pos);		/* this one's right */
-		AHEAD(pos);			/* fix the OCH_ */
-		EMIT(OOR2, 0);			/* offset very wrong... */
-		AHEAD(THERE());			/* ...so fix it */
-		ASTERN(O_CH, THERETHERE());
-		break;
-	case '{':
-		count = p_count(p);
-		if (EAT(',')) {
-			if (isdigit((uch)PEEK())) {
-				count2 = p_count(p);
-				(void)REQUIRE(count <= count2, REG_BADBR);
-			} else		/* single number with comma */
-				count2 = INFINITY;
-		} else		/* just a single number */
-			count2 = count;
-		repeat(p, pos, count, count2);
-		if (!EAT('}')) {	/* error heuristics */
-			while (MORE() && PEEK() != '}')
-				NEXT();
-			(void)REQUIRE(MORE(), REG_EBRACE);
-			SETERROR(REG_BADBR);
-		}
-		break;
-	}
-
-	if (!MORE())
-		return;
-	c = PEEK();
-	if (!( c == '*' || c == '+' || c == '?' ||
-				(c == '{' && MORE2() && isdigit((uch)PEEK2())) ) )
-		return;
-	SETERROR(REG_BADRPT);
-}
-
-/*
- - p_str - string (no metacharacters) "parser"
- == static void p_str(struct parse *p);
- */
-static void
-p_str(p)
-struct parse *p;
-{
-	(void)REQUIRE(MORE(), REG_EMPTY);
-	while (MORE())
-		ordinary(p, GETNEXT());
-}
-
-/*
- - p_bre - BRE parser top level, anchoring and concatenation
- == static void p_bre(struct parse *p, int end1, \
- ==	int end2);
- * Giving end1 as OUT essentially eliminates the end1/end2 check.
- *
- * This implementation is a bit of a kludge, in that a trailing $ is first
- * taken as an ordinary character and then revised to be an anchor.  The
- * only undesirable side effect is that '$' gets included as a character
- * category in such cases.  This is fairly harmless; not worth fixing.
- * The amount of lookahead needed to avoid this kludge is excessive.
- */
-static void
-p_bre(p, end1, end2)
-struct parse *p;
-int end1;			/* first terminating character */
-int end2;			/* second terminating character */
-{
-	sopno start = HERE();
-	int first = 1;			/* first subexpression? */
-	int wasdollar = 0;
-
-	if (EAT('^')) {
-		EMIT(OBOL, 0);
-		p->g->iflags |= USEBOL;
-		p->g->nbol++;
-	}
-	while (MORE() && !SEETWO(end1, end2)) {
-		wasdollar = p_simp_re(p, first);
-		first = 0;
-	}
-	if (wasdollar) {	/* oops, that was a trailing anchor */
-		DROP(1);
-		EMIT(OEOL, 0);
-		p->g->iflags |= USEEOL;
-		p->g->neol++;
-	}
-
-	(void)REQUIRE(HERE() != start, REG_EMPTY);	/* require nonempty */
-}
-
-/*
- - p_simp_re - parse a simple RE, an atom possibly followed by a repetition
- == static int p_simp_re(struct parse *p, int starordinary);
- */
-static int			/* was the simple RE an unbackslashed $? */
-p_simp_re(p, starordinary)
-struct parse *p;
-int starordinary;		/* is a leading * an ordinary character? */
-{
-	int c;
-	int count;
-	int count2;
-	sopno pos;
-	int i;
-	sopno subno;
-#	define	BACKSL	(1<<CHAR_BIT)
-
-	pos = HERE();		/* repetion op, if any, covers from here */
-
-	assert(MORE());		/* caller should have ensured this */
-	c = GETNEXT();
-	if (c == '\\') {
-		(void)REQUIRE(MORE(), REG_EESCAPE);
-		c = BACKSL | GETNEXT();
-	}
-	switch (c) {
-	case '.':
-		if (p->g->cflags&REG_NEWLINE)
-			nonnewline(p);
-		else
-			EMIT(OANY, 0);
-		break;
-	case '[':
-		p_bracket(p);
-		break;
-	case BACKSL|'{':
-		SETERROR(REG_BADRPT);
-		break;
-	case BACKSL|'(':
-		p->g->nsub++;
-		subno = p->g->nsub;
-		if (subno < NPAREN)
-			p->pbegin[subno] = HERE();
-		EMIT(OLPAREN, subno);
-		/* the MORE here is an error heuristic */
-		if (MORE() && !SEETWO('\\', ')'))
-			p_bre(p, '\\', ')');
-		if (subno < NPAREN) {
-			p->pend[subno] = HERE();
-			assert(p->pend[subno] != 0);
-		}
-		EMIT(ORPAREN, subno);
-		(void)REQUIRE(EATTWO('\\', ')'), REG_EPAREN);
-		break;
-	case BACKSL|')':	/* should not get here -- must be user */
-	case BACKSL|'}':
-		SETERROR(REG_EPAREN);
-		break;
-	case BACKSL|'1':
-	case BACKSL|'2':
-	case BACKSL|'3':
-	case BACKSL|'4':
-	case BACKSL|'5':
-	case BACKSL|'6':
-	case BACKSL|'7':
-	case BACKSL|'8':
-	case BACKSL|'9':
-		i = (c&~BACKSL) - '0';
-		assert(i < NPAREN);
-		if (p->pend[i] != 0) {
-			assert(i <= p->g->nsub);
-			EMIT(OBACK_, i);
-			assert(p->pbegin[i] != 0);
-			assert(OP(p->strip[p->pbegin[i]]) == OLPAREN);
-			assert(OP(p->strip[p->pend[i]]) == ORPAREN);
-			(void) dupl(p, p->pbegin[i]+1, p->pend[i]);
-			EMIT(O_BACK, i);
-		} else
-			SETERROR(REG_ESUBREG);
-		p->g->backrefs = 1;
-		break;
-	case '*':
-		(void)REQUIRE(starordinary, REG_BADRPT);
-		/* FALLTHROUGH */
-	default:
-		ordinary(p, (char)c);
-		break;
-	}
-
-	if (EAT('*')) {		/* implemented as +? */
-		/* this case does not require the (y|) trick, noKLUDGE */
-		INSERT(OPLUS_, pos);
-		ASTERN(O_PLUS, pos);
-		INSERT(OQUEST_, pos);
-		ASTERN(O_QUEST, pos);
-	} else if (EATTWO('\\', '{')) {
-		count = p_count(p);
-		if (EAT(',')) {
-			if (MORE() && isdigit((uch)PEEK())) {
-				count2 = p_count(p);
-				(void)REQUIRE(count <= count2, REG_BADBR);
-			} else		/* single number with comma */
-				count2 = INFINITY;
-		} else		/* just a single number */
-			count2 = count;
-		repeat(p, pos, count, count2);
-		if (!EATTWO('\\', '}')) {	/* error heuristics */
-			while (MORE() && !SEETWO('\\', '}'))
-				NEXT();
-			(void)REQUIRE(MORE(), REG_EBRACE);
-			SETERROR(REG_BADBR);
-		}
-	} else if (c == '$')     /* $ (but not \$) ends it */
-		return(1);
-
-	return(0);
-}
-
-/*
- - p_count - parse a repetition count
- == static int p_count(struct parse *p);
- */
-static int			/* the value */
-p_count(p)
-struct parse *p;
-{
-	int count = 0;
-	int ndigits = 0;
-
-	while (MORE() && isdigit((uch)PEEK()) && count <= DUPMAX) {
-		count = count*10 + (GETNEXT() - '0');
-		ndigits++;
-	}
-
-	(void)REQUIRE(ndigits > 0 && count <= DUPMAX, REG_BADBR);
-	return(count);
-}
-
-/*
- - p_bracket - parse a bracketed character list
- == static void p_bracket(struct parse *p);
- *
- * Note a significant property of this code:  if the allocset() did SETERROR,
- * no set operations are done.
- */
-static void
-p_bracket(p)
-struct parse *p;
-{
-	cset *cs = allocset(p);
-	int invert = 0;
-
-	/* Dept of Truly Sickening Special-Case Kludges */
-	if (p->next + 5 < p->end && strncmp(p->next, "[:<:]]", 6) == 0) {
-		EMIT(OBOW, 0);
-		NEXTn(6);
-		return;
-	}
-	if (p->next + 5 < p->end && strncmp(p->next, "[:>:]]", 6) == 0) {
-		EMIT(OEOW, 0);
-		NEXTn(6);
-		return;
-	}
-
-	if (EAT('^'))
-		invert++;	/* make note to invert set at end */
-	if (EAT(']'))
-		CHadd(cs, ']');
-	else if (EAT('-'))
-		CHadd(cs, '-');
-	while (MORE() && PEEK() != ']' && !SEETWO('-', ']'))
-		p_b_term(p, cs);
-	if (EAT('-'))
-		CHadd(cs, '-');
-	(void)MUSTEAT(']', REG_EBRACK);
-
-	if (p->error != 0)	/* don't mess things up further */
-		return;
-
-	if (p->g->cflags&REG_ICASE) {
-		int i;
-		int ci;
-
-		for (i = p->g->csetsize - 1; i >= 0; i--)
-			if (CHIN(cs, i) && isalpha(i)) {
-				ci = othercase(i);
-				if (ci != i)
-					CHadd(cs, ci);
-			}
-		if (cs->multis != NULL)
-			mccase(p, cs);
-	}
-	if (invert) {
-		int i;
-
-		for (i = p->g->csetsize - 1; i >= 0; i--)
-			if (CHIN(cs, i))
-				CHsub(cs, i);
-			else
-				CHadd(cs, i);
-		if (p->g->cflags&REG_NEWLINE)
-			CHsub(cs, '\n');
-		if (cs->multis != NULL)
-			mcinvert(p, cs);
-	}
-
-	assert(cs->multis == NULL);		/* xxx */
-
-	if (nch(p, cs) == 1) {		/* optimize singleton sets */
-		ordinary(p, firstch(p, cs));
-		freeset(p, cs);
-	} else
-		EMIT(OANYOF, freezeset(p, cs));
-}
-
-/*
- - p_b_term - parse one term of a bracketed character list
- == static void p_b_term(struct parse *p, cset *cs);
- */
-static void
-p_b_term(p, cs)
-struct parse *p;
-cset *cs;
-{
-	char c;
-	char start, finish;
-	int i;
-
-	/* classify what we've got */
-	switch ((MORE()) ? PEEK() : '\0') {
-	case '[':
-		c = (MORE2()) ? PEEK2() : '\0';
-		break;
-	case '-':
-		SETERROR(REG_ERANGE);
-		return;			/* NOTE RETURN */
-		break;
-	default:
-		c = '\0';
-		break;
-	}
-
-	switch (c) {
-	case ':':		/* character class */
-		NEXT2();
-		(void)REQUIRE(MORE(), REG_EBRACK);
-		c = PEEK();
-		(void)REQUIRE(c != '-' && c != ']', REG_ECTYPE);
-		p_b_cclass(p, cs);
-		(void)REQUIRE(MORE(), REG_EBRACK);
-		(void)REQUIRE(EATTWO(':', ']'), REG_ECTYPE);
-		break;
-	case '=':		/* equivalence class */
-		NEXT2();
-		(void)REQUIRE(MORE(), REG_EBRACK);
-		c = PEEK();
-		(void)REQUIRE(c != '-' && c != ']', REG_ECOLLATE);
-		p_b_eclass(p, cs);
-		(void)REQUIRE(MORE(), REG_EBRACK);
-		(void)REQUIRE(EATTWO('=', ']'), REG_ECOLLATE);
-		break;
-	default:		/* symbol, ordinary character, or range */
-/* xxx revision needed for multichar stuff */
-		start = p_b_symbol(p);
-		if (SEE('-') && MORE2() && PEEK2() != ']') {
-			/* range */
-			NEXT();
-			if (EAT('-'))
-				finish = '-';
-			else
-				finish = p_b_symbol(p);
-		} else
-			finish = start;
-		if (start == finish)
-			CHadd(cs, start);
-		else {
-			if (__collate_load_error) {
-				(void)REQUIRE((uch)start <= (uch)finish, REG_ERANGE);
-				for (i = (uch)start; i <= (uch)finish; i++)
-					CHadd(cs, i);
-			} else {
-				(void)REQUIRE(__collate_range_cmp(start, finish) <= 0, REG_ERANGE);
-				for (i = CHAR_MIN; i <= CHAR_MAX; i++) {
-					if (   __collate_range_cmp(start, i) <= 0
-					    && __collate_range_cmp(i, finish) <= 0
-					   )
-						CHadd(cs, i);
-				}
-			}
-		}
-		break;
-	}
-}
-
-/*
- - p_b_cclass - parse a character-class name and deal with it
- == static void p_b_cclass(struct parse *p, cset *cs);
- */
-static void
-p_b_cclass(p, cs)
-struct parse *p;
-cset *cs;
-{
-	int c;
-	char *sp = p->next;
-	struct cclass *cp;
-	size_t len;
-
-	while (MORE() && isalpha((uch)PEEK()))
-		NEXT();
-	len = p->next - sp;
-	for (cp = cclasses; cp->name != NULL; cp++)
-		if (strncmp(cp->name, sp, len) == 0 && cp->name[len] == '\0')
-			break;
-	if (cp->name == NULL) {
-		/* oops, didn't find it */
-		SETERROR(REG_ECTYPE);
-		return;
-	}
-
-	switch (cp->fidx) {
-	case CALNUM:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isalnum((uch)c))
-				CHadd(cs, c);
-		break;
-	case CALPHA:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isalpha((uch)c))
-				CHadd(cs, c);
-		break;
-	case CBLANK:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isblank((uch)c))
-				CHadd(cs, c);
-		break;
-	case CCNTRL:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (iscntrl((uch)c))
-				CHadd(cs, c);
-		break;
-	case CDIGIT:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isdigit((uch)c))
-				CHadd(cs, c);
-		break;
-	case CGRAPH:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isgraph((uch)c))
-				CHadd(cs, c);
-		break;
-	case CLOWER:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (islower((uch)c))
-				CHadd(cs, c);
-		break;
-	case CPRINT:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isprint((uch)c))
-				CHadd(cs, c);
-		break;
-	case CPUNCT:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (ispunct((uch)c))
-				CHadd(cs, c);
-		break;
-	case CSPACE:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isspace((uch)c))
-				CHadd(cs, c);
-		break;
-	case CUPPER:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isupper((uch)c))
-				CHadd(cs, c);
-		break;
-	case CXDIGIT:
-		for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-			if (isxdigit((uch)c))
-				CHadd(cs, c);
-		break;
-	}
-#if 0
-	for (u = cp->multis; *u != '\0'; u += strlen(u) + 1)
-		MCadd(p, cs, u);
-#endif
-}
-
-/*
- - p_b_eclass - parse an equivalence-class name and deal with it
- == static void p_b_eclass(struct parse *p, cset *cs);
- *
- * This implementation is incomplete. xxx
- */
-static void
-p_b_eclass(p, cs)
-struct parse *p;
-cset *cs;
-{
-	char c;
-
-	c = p_b_coll_elem(p, '=');
-	CHadd(cs, c);
-}
-
-/*
- - p_b_symbol - parse a character or [..]ed multicharacter collating symbol
- == static char p_b_symbol(struct parse *p);
- */
-static char			/* value of symbol */
-p_b_symbol(p)
-struct parse *p;
-{
-	char value;
-
-	(void)REQUIRE(MORE(), REG_EBRACK);
-	if (!EATTWO('[', '.'))
-		return(GETNEXT());
-
-	/* collating symbol */
-	value = p_b_coll_elem(p, '.');
-	(void)REQUIRE(EATTWO('.', ']'), REG_ECOLLATE);
-	return(value);
-}
-
-/*
- - p_b_coll_elem - parse a collating-element name and look it up
- == static char p_b_coll_elem(struct parse *p, int endc);
- */
-static char			/* value of collating element */
-p_b_coll_elem(p, endc)
-struct parse *p;
-int endc;			/* name ended by endc,']' */
-{
-	char *sp = p->next;
-	struct cname *cp;
-	int len;
-
-	while (MORE() && !SEETWO(endc, ']'))
-		NEXT();
-	if (!MORE()) {
-		SETERROR(REG_EBRACK);
-		return(0);
-	}
-	len = p->next - sp;
-	for (cp = cnames; cp->name != NULL; cp++)
-		if (strncmp(cp->name, sp, len) == 0 && cp->name[len] == '\0')
-			return(cp->code);	/* known name */
-	if (len == 1)
-		return(*sp);	/* single character */
-	SETERROR(REG_ECOLLATE);			/* neither */
-	return(0);
-}
-
-/*
- - othercase - return the case counterpart of an alphabetic
- == static char othercase(int ch);
- */
-static char			/* if no counterpart, return ch */
-othercase(ch)
-int ch;
-{
-	ch = (uch)ch;
-	assert(isalpha(ch));
-	if (isupper(ch))
-		return(tolower(ch));
-	else if (islower(ch))
-		return(toupper(ch));
-	else			/* peculiar, but could happen */
-		return(ch);
-}
-
-/*
- - bothcases - emit a dualcase version of a two-case character
- == static void bothcases(struct parse *p, int ch);
- *
- * Boy, is this implementation ever a kludge...
- */
-static void
-bothcases(p, ch)
-struct parse *p;
-int ch;
-{
-	char *oldnext = p->next;
-	char *oldend = p->end;
-	char bracket[3];
-
-	ch = (uch)ch;
-	assert(othercase(ch) != ch);	/* p_bracket() would recurse */
-	p->next = bracket;
-	p->end = bracket+2;
-	bracket[0] = ch;
-	bracket[1] = ']';
-	bracket[2] = '\0';
-	p_bracket(p);
-	assert(p->next == bracket+2);
-	p->next = oldnext;
-	p->end = oldend;
-}
-
-/*
- - ordinary - emit an ordinary character
- == static void ordinary(struct parse *p, int ch);
- */
-static void
-ordinary(p, ch)
-struct parse *p;
-int ch;
-{
-	cat_t *cap = p->g->categories;
-
-	if ((p->g->cflags&REG_ICASE) && isalpha((uch)ch) && othercase(ch) != ch)
-		bothcases(p, ch);
-	else {
-		EMIT(OCHAR, (uch)ch);
-		if (cap[ch] == 0)
-			cap[ch] = p->g->ncategories++;
-	}
-}
-
-/*
- - nonnewline - emit REG_NEWLINE version of OANY
- == static void nonnewline(struct parse *p);
- *
- * Boy, is this implementation ever a kludge...
- */
-static void
-nonnewline(p)
-struct parse *p;
-{
-	char *oldnext = p->next;
-	char *oldend = p->end;
-	char bracket[4];
-
-	p->next = bracket;
-	p->end = bracket+3;
-	bracket[0] = '^';
-	bracket[1] = '\n';
-	bracket[2] = ']';
-	bracket[3] = '\0';
-	p_bracket(p);
-	assert(p->next == bracket+3);
-	p->next = oldnext;
-	p->end = oldend;
-}
-
-/*
- - repeat - generate code for a bounded repetition, recursively if needed
- == static void repeat(struct parse *p, sopno start, int from, int to);
- */
-static void
-repeat(p, start, from, to)
-struct parse *p;
-sopno start;			/* operand from here to end of strip */
-int from;			/* repeated from this number */
-int to;				/* to this number of times (maybe INFINITY) */
-{
-	sopno finish = HERE();
-#	define	N	2
-#	define	INF	3
-#	define	REP(f, t)	((f)*8 + (t))
-#	define	MAP(n)	(((n) <= 1) ? (n) : ((n) == INFINITY) ? INF : N)
-	sopno copy;
-
-	if (p->error != 0)	/* head off possible runaway recursion */
-		return;
-
-	assert(from <= to);
-
-	switch (REP(MAP(from), MAP(to))) {
-	case REP(0, 0):			/* must be user doing this */
-		DROP(finish-start);	/* drop the operand */
-		break;
-	case REP(0, 1):			/* as x{1,1}? */
-	case REP(0, N):			/* as x{1,n}? */
-	case REP(0, INF):		/* as x{1,}? */
-		/* KLUDGE: emit y? as (y|) until subtle bug gets fixed */
-		INSERT(OCH_, start);		/* offset is wrong... */
-		repeat(p, start+1, 1, to);
-		ASTERN(OOR1, start);
-		AHEAD(start);			/* ... fix it */
-		EMIT(OOR2, 0);
-		AHEAD(THERE());
-		ASTERN(O_CH, THERETHERE());
-		break;
-	case REP(1, 1):			/* trivial case */
-		/* done */
-		break;
-	case REP(1, N):			/* as x?x{1,n-1} */
-		/* KLUDGE: emit y? as (y|) until subtle bug gets fixed */
-		INSERT(OCH_, start);
-		ASTERN(OOR1, start);
-		AHEAD(start);
-		EMIT(OOR2, 0);			/* offset very wrong... */
-		AHEAD(THERE());			/* ...so fix it */
-		ASTERN(O_CH, THERETHERE());
-		copy = dupl(p, start+1, finish+1);
-		assert(copy == finish+4);
-		repeat(p, copy, 1, to-1);
-		break;
-	case REP(1, INF):		/* as x+ */
-		INSERT(OPLUS_, start);
-		ASTERN(O_PLUS, start);
-		break;
-	case REP(N, N):			/* as xx{m-1,n-1} */
-		copy = dupl(p, start, finish);
-		repeat(p, copy, from-1, to-1);
-		break;
-	case REP(N, INF):		/* as xx{n-1,INF} */
-		copy = dupl(p, start, finish);
-		repeat(p, copy, from-1, to);
-		break;
-	default:			/* "can't happen" */
-		SETERROR(REG_ASSERT);	/* just in case */
-		break;
-	}
-}
-
-/*
- - seterr - set an error condition
- == static int seterr(struct parse *p, int e);
- */
-static int			/* useless but makes type checking happy */
-seterr(p, e)
-struct parse *p;
-int e;
-{
-	if (p->error == 0)	/* keep earliest error condition */
-		p->error = e;
-	p->next = nuls;		/* try to bring things to a halt */
-	p->end = nuls;
-	return(0);		/* make the return value well-defined */
-}
-
-/*
- - allocset - allocate a set of characters for []
- == static cset *allocset(struct parse *p);
- */
-static cset *
-allocset(p)
-struct parse *p;
-{
-	int no = p->g->ncsets++;
-	size_t nc;
-	size_t nbytes;
-	cset *cs;
-	size_t css = (size_t)p->g->csetsize;
-	int i;
-
-	if (no >= p->ncsalloc) {	/* need another column of space */
-		p->ncsalloc += CHAR_BIT;
-		nc = p->ncsalloc;
-		assert(nc % CHAR_BIT == 0);
-		nbytes = nc / CHAR_BIT * css;
-		if (p->g->sets == NULL)
-			p->g->sets = (cset *)malloc(nc * sizeof(cset));
-		else
-			p->g->sets = (cset *)reallocf((char *)p->g->sets,
-							nc * sizeof(cset));
-		if (p->g->setbits == NULL)
-			p->g->setbits = (uch *)malloc(nbytes);
-		else {
-			p->g->setbits = (uch *)reallocf((char *)p->g->setbits,
-								nbytes);
-			/* xxx this isn't right if setbits is now NULL */
-			for (i = 0; i < no; i++)
-				p->g->sets[i].ptr = p->g->setbits + css*(i/CHAR_BIT);
-		}
-		if (p->g->sets != NULL && p->g->setbits != NULL)
-			(void) memset((char *)p->g->setbits + (nbytes - css),
-								0, css);
-		else {
-			no = 0;
-			SETERROR(REG_ESPACE);
-			/* caller's responsibility not to do set ops */
-		}
-	}
-
-	assert(p->g->sets != NULL);	/* xxx */
-	cs = &p->g->sets[no];
-	cs->ptr = p->g->setbits + css*((no)/CHAR_BIT);
-	cs->mask = 1 << ((no) % CHAR_BIT);
-	cs->hash = 0;
-	cs->smultis = 0;
-	cs->multis = NULL;
-
-	return(cs);
-}
-
-/*
- - freeset - free a now-unused set
- == static void freeset(struct parse *p, cset *cs);
- */
-static void
-freeset(p, cs)
-struct parse *p;
-cset *cs;
-{
-	int i;
-	cset *top = &p->g->sets[p->g->ncsets];
-	size_t css = (size_t)p->g->csetsize;
-
-	for (i = 0; i < css; i++)
-		CHsub(cs, i);
-	if (cs == top-1)	/* recover only the easy case */
-		p->g->ncsets--;
-}
-
-/*
- - freezeset - final processing on a set of characters
- == static int freezeset(struct parse *p, cset *cs);
- *
- * The main task here is merging identical sets.  This is usually a waste
- * of time (although the hash code minimizes the overhead), but can win
- * big if REG_ICASE is being used.  REG_ICASE, by the way, is why the hash
- * is done using addition rather than xor -- all ASCII [aA] sets xor to
- * the same value!
- */
-static int			/* set number */
-freezeset(p, cs)
-struct parse *p;
-cset *cs;
-{
-	short h = cs->hash;
-	int i;
-	cset *top = &p->g->sets[p->g->ncsets];
-	cset *cs2;
-	size_t css = (size_t)p->g->csetsize;
-
-	/* look for an earlier one which is the same */
-	for (cs2 = &p->g->sets[0]; cs2 < top; cs2++)
-		if (cs2->hash == h && cs2 != cs) {
-			/* maybe */
-			for (i = 0; i < css; i++)
-				if (!!CHIN(cs2, i) != !!CHIN(cs, i))
-					break;		/* no */
-			if (i == css)
-				break;			/* yes */
-		}
-
-	if (cs2 < top) {	/* found one */
-		freeset(p, cs);
-		cs = cs2;
-	}
-
-	return((int)(cs - p->g->sets));
-}
-
-/*
- - firstch - return first character in a set (which must have at least one)
- == static int firstch(struct parse *p, cset *cs);
- */
-static int			/* character; there is no "none" value */
-firstch(p, cs)
-struct parse *p;
-cset *cs;
-{
-	int i;
-	size_t css = (size_t)p->g->csetsize;
-
-	for (i = 0; i < css; i++)
-		if (CHIN(cs, i))
-			return((char)i);
-	assert(never);
-	return(0);		/* arbitrary */
-}
-
-/*
- - nch - number of characters in a set
- == static int nch(struct parse *p, cset *cs);
- */
-static int
-nch(p, cs)
-struct parse *p;
-cset *cs;
-{
-	int i;
-	size_t css = (size_t)p->g->csetsize;
-	int n = 0;
-
-	for (i = 0; i < css; i++)
-		if (CHIN(cs, i))
-			n++;
-	return(n);
-}
-
-/*
- - mcadd - add a collating element to a cset
- == static void mcadd(struct parse *p, cset *cs, \
- ==	char *cp);
- */
-static void
-mcadd(p, cs, cp)
-struct parse *p;
-cset *cs;
-char *cp;
-{
-	size_t oldend = cs->smultis;
-
-	cs->smultis += strlen(cp) + 1;
-	if (cs->multis == NULL)
-		cs->multis = malloc(cs->smultis);
-	else
-		cs->multis = reallocf(cs->multis, cs->smultis);
-	if (cs->multis == NULL) {
-		SETERROR(REG_ESPACE);
-		return;
-	}
-
-	(void) strcpy(cs->multis + oldend - 1, cp);
-	cs->multis[cs->smultis - 1] = '\0';
-}
-
-#if used
-/*
- - mcsub - subtract a collating element from a cset
- == static void mcsub(cset *cs, char *cp);
- */
-static void
-mcsub(cs, cp)
-cset *cs;
-char *cp;
-{
-	char *fp = mcfind(cs, cp);
-	size_t len = strlen(fp);
-
-	assert(fp != NULL);
-	(void) memmove(fp, fp + len + 1,
-				cs->smultis - (fp + len + 1 - cs->multis));
-	cs->smultis -= len;
-
-	if (cs->smultis == 0) {
-		free(cs->multis);
-		cs->multis = NULL;
-		return;
-	}
-
-	cs->multis = reallocf(cs->multis, cs->smultis);
-	assert(cs->multis != NULL);
-}
-
-/*
- - mcin - is a collating element in a cset?
- == static int mcin(cset *cs, char *cp);
- */
-static int
-mcin(cs, cp)
-cset *cs;
-char *cp;
-{
-	return(mcfind(cs, cp) != NULL);
-}
-
-/*
- - mcfind - find a collating element in a cset
- == static char *mcfind(cset *cs, char *cp);
- */
-static char *
-mcfind(cs, cp)
-cset *cs;
-char *cp;
-{
-	char *p;
-
-	if (cs->multis == NULL)
-		return(NULL);
-	for (p = cs->multis; *p != '\0'; p += strlen(p) + 1)
-		if (strcmp(cp, p) == 0)
-			return(p);
-	return(NULL);
-}
-#endif
-
-/*
- - mcinvert - invert the list of collating elements in a cset
- == static void mcinvert(struct parse *p, cset *cs);
- *
- * This would have to know the set of possibilities.  Implementation
- * is deferred.
- */
-static void
-mcinvert(p, cs)
-struct parse *p;
-cset *cs;
-{
-	assert(cs->multis == NULL);	/* xxx */
-}
-
-/*
- - mccase - add case counterparts of the list of collating elements in a cset
- == static void mccase(struct parse *p, cset *cs);
- *
- * This would have to know the set of possibilities.  Implementation
- * is deferred.
- */
-static void
-mccase(p, cs)
-struct parse *p;
-cset *cs;
-{
-	assert(cs->multis == NULL);	/* xxx */
-}
-
-/*
- - isinsets - is this character in any sets?
- == static int isinsets(struct re_guts *g, int c);
- */
-static int			/* predicate */
-isinsets(g, c)
-struct re_guts *g;
-int c;
-{
-	uch *col;
-	int i;
-	int ncols = (g->ncsets+(CHAR_BIT-1)) / CHAR_BIT;
-	unsigned uc = (uch)c;
-
-	for (i = 0, col = g->setbits; i < ncols; i++, col += g->csetsize)
-		if (col[uc] != 0)
-			return(1);
-	return(0);
-}
-
-/*
- - samesets - are these two characters in exactly the same sets?
- == static int samesets(struct re_guts *g, int c1, int c2);
- */
-static int			/* predicate */
-samesets(g, c1, c2)
-struct re_guts *g;
-int c1;
-int c2;
-{
-	uch *col;
-	int i;
-	int ncols = (g->ncsets+(CHAR_BIT-1)) / CHAR_BIT;
-	unsigned uc1 = (uch)c1;
-	unsigned uc2 = (uch)c2;
-
-	for (i = 0, col = g->setbits; i < ncols; i++, col += g->csetsize)
-		if (col[uc1] != col[uc2])
-			return(0);
-	return(1);
-}
-
-/*
- - categorize - sort out character categories
- == static void categorize(struct parse *p, struct re_guts *g);
- */
-static void
-categorize(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	cat_t *cats = g->categories;
-	int c;
-	int c2;
-	cat_t cat;
-
-	/* avoid making error situations worse */
-	if (p->error != 0)
-		return;
-
-	for (c = CHAR_MIN; c <= CHAR_MAX; c++)
-		if (cats[c] == 0 && isinsets(g, c)) {
-			cat = g->ncategories++;
-			cats[c] = cat;
-			for (c2 = c+1; c2 <= CHAR_MAX; c2++)
-				if (cats[c2] == 0 && samesets(g, c, c2))
-					cats[c2] = cat;
-		}
-}
-
-/*
- - dupl - emit a duplicate of a bunch of sops
- == static sopno dupl(struct parse *p, sopno start, sopno finish);
- */
-static sopno			/* start of duplicate */
-dupl(p, start, finish)
-struct parse *p;
-sopno start;			/* from here */
-sopno finish;			/* to this less one */
-{
-	sopno ret = HERE();
-	sopno len = finish - start;
-
-	assert(finish >= start);
-	if (len == 0)
-		return(ret);
-	enlarge(p, p->ssize + len);	/* this many unexpected additions */
-	assert(p->ssize >= p->slen + len);
-	(void) memcpy((char *)(p->strip + p->slen),
-		(char *)(p->strip + start), (size_t)len*sizeof(sop));
-	p->slen += len;
-	return(ret);
-}
-
-/*
- - doemit - emit a strip operator
- == static void doemit(struct parse *p, sop op, size_t opnd);
- *
- * It might seem better to implement this as a macro with a function as
- * hard-case backup, but it's just too big and messy unless there are
- * some changes to the data structures.  Maybe later.
- */
-static void
-doemit(p, op, opnd)
-struct parse *p;
-sop op;
-size_t opnd;
-{
-	/* avoid making error situations worse */
-	if (p->error != 0)
-		return;
-
-	/* deal with oversize operands ("can't happen", more or less) */
-	assert(opnd < 1<<OPSHIFT);
-
-	/* deal with undersized strip */
-	if (p->slen >= p->ssize)
-		enlarge(p, (p->ssize+1) / 2 * 3);	/* +50% */
-	assert(p->slen < p->ssize);
-
-	/* finally, it's all reduced to the easy case */
-	p->strip[p->slen++] = SOP(op, opnd);
-}
-
-/*
- - doinsert - insert a sop into the strip
- == static void doinsert(struct parse *p, sop op, size_t opnd, sopno pos);
- */
-static void
-doinsert(p, op, opnd, pos)
-struct parse *p;
-sop op;
-size_t opnd;
-sopno pos;
-{
-	sopno sn;
-	sop s;
-	int i;
-
-	/* avoid making error situations worse */
-	if (p->error != 0)
-		return;
-
-	sn = HERE();
-	EMIT(op, opnd);		/* do checks, ensure space */
-	assert(HERE() == sn+1);
-	s = p->strip[sn];
-
-	/* adjust paren pointers */
-	assert(pos > 0);
-	for (i = 1; i < NPAREN; i++) {
-		if (p->pbegin[i] >= pos) {
-			p->pbegin[i]++;
-		}
-		if (p->pend[i] >= pos) {
-			p->pend[i]++;
-		}
-	}
-
-	memmove((char *)&p->strip[pos+1], (char *)&p->strip[pos],
-						(HERE()-pos-1)*sizeof(sop));
-	p->strip[pos] = s;
-}
-
-/*
- - dofwd - complete a forward reference
- == static void dofwd(struct parse *p, sopno pos, sop value);
- */
-static void
-dofwd(p, pos, value)
-struct parse *p;
-sopno pos;
-sop value;
-{
-	/* avoid making error situations worse */
-	if (p->error != 0)
-		return;
-
-	assert(value < 1<<OPSHIFT);
-	p->strip[pos] = OP(p->strip[pos]) | value;
-}
-
-/*
- - enlarge - enlarge the strip
- == static void enlarge(struct parse *p, sopno size);
- */
-static void
-enlarge(p, size)
-struct parse *p;
-sopno size;
-{
-	sop *sp;
-
-	if (p->ssize >= size)
-		return;
-
-	sp = (sop *)realloc(p->strip, size*sizeof(sop));
-	if (sp == NULL) {
-		SETERROR(REG_ESPACE);
-		return;
-	}
-	p->strip = sp;
-	p->ssize = size;
-}
-
-/*
- - stripsnug - compact the strip
- == static void stripsnug(struct parse *p, struct re_guts *g);
- */
-static void
-stripsnug(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	g->nstates = p->slen;
-	g->strip = (sop *)realloc((char *)p->strip, p->slen * sizeof(sop));
-	if (g->strip == NULL) {
-		SETERROR(REG_ESPACE);
-		g->strip = p->strip;
-	}
-}
-
-/*
- - findmust - fill in must and mlen with longest mandatory literal string
- == static void findmust(struct parse *p, struct re_guts *g);
- *
- * This algorithm could do fancy things like analyzing the operands of |
- * for common subsequences.  Someday.  This code is simple and finds most
- * of the interesting cases.
- *
- * Note that must and mlen got initialized during setup.
- */
-static void
-findmust(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	sop *scan;
-	sop *start;
-	sop *newstart;
-	sopno newlen;
-	sop s;
-	char *cp;
-	sopno i;
-	int offset;
-	int cs, mccs;
-
-	/* avoid making error situations worse */
-	if (p->error != 0)
-		return;
-
-	/* Find out if we can handle OANYOF or not */
-	mccs = 0;
-	for (cs = 0; cs < g->ncsets; cs++)
-		if (g->sets[cs].multis != NULL)
-			mccs = 1;
-
-	/* find the longest OCHAR sequence in strip */
-	newlen = 0;
-	offset = 0;
-	g->moffset = 0;
-	scan = g->strip + 1;
-	do {
-		s = *scan++;
-		switch (OP(s)) {
-		case OCHAR:		/* sequence member */
-			if (newlen == 0)		/* new sequence */
-				newstart = scan - 1;
-			newlen++;
-			break;
-		case OPLUS_:		/* things that don't break one */
-		case OLPAREN:
-		case ORPAREN:
-			break;
-		case OQUEST_:		/* things that must be skipped */
-		case OCH_:
-			offset = altoffset(scan, offset, mccs);
-			scan--;
-			do {
-				scan += OPND(s);
-				s = *scan;
-				/* assert() interferes w debug printouts */
-				if (OP(s) != O_QUEST && OP(s) != O_CH &&
-							OP(s) != OOR2) {
-					g->iflags |= BAD;
-					return;
-				}
-			} while (OP(s) != O_QUEST && OP(s) != O_CH);
-			/* fallthrough */
-		case OBOW:		/* things that break a sequence */
-		case OEOW:
-		case OBOL:
-		case OEOL:
-		case O_QUEST:
-		case O_CH:
-		case OEND:
-			if (newlen > g->mlen) {		/* ends one */
-				start = newstart;
-				g->mlen = newlen;
-				if (offset > -1) {
-					g->moffset += offset;
-					offset = newlen;
-				} else
-					g->moffset = offset;
-			} else {
-				if (offset > -1)
-					offset += newlen;
-			}
-			newlen = 0;
-			break;
-		case OANY:
-			if (newlen > g->mlen) {		/* ends one */
-				start = newstart;
-				g->mlen = newlen;
-				if (offset > -1) {
-					g->moffset += offset;
-					offset = newlen;
-				} else
-					g->moffset = offset;
-			} else {
-				if (offset > -1)
-					offset += newlen;
-			}
-			if (offset > -1)
-				offset++;
-			newlen = 0;
-			break;
-		case OANYOF:		/* may or may not invalidate offset */
-			/* First, everything as OANY */
-			if (newlen > g->mlen) {		/* ends one */
-				start = newstart;
-				g->mlen = newlen;
-				if (offset > -1) {
-					g->moffset += offset;
-					offset = newlen;
-				} else
-					g->moffset = offset;
-			} else {
-				if (offset > -1)
-					offset += newlen;
-			}
-			if (offset > -1)
-				offset++;
-			newlen = 0;
-			/* And, now, if we found out we can't deal with
-			 * it, make offset = -1.
-			 */
-			if (mccs)
-				offset = -1;
-			break;
-		default:
-			/* Anything here makes it impossible or too hard
-			 * to calculate the offset -- so we give up;
-			 * save the last known good offset, in case the
-			 * must sequence doesn't occur later.
-			 */
-			if (newlen > g->mlen) {		/* ends one */
-				start = newstart;
-				g->mlen = newlen;
-				if (offset > -1)
-					g->moffset += offset;
-				else
-					g->moffset = offset;
-			}
-			offset = -1;
-			newlen = 0;
-			break;
-		}
-	} while (OP(s) != OEND);
-
-	if (g->mlen == 0) {		/* there isn't one */
-		g->moffset = -1;
-		return;
-	}
-
-	/* turn it into a character string */
-	g->must = malloc((size_t)g->mlen + 1);
-	if (g->must == NULL) {		/* argh; just forget it */
-		g->mlen = 0;
-		g->moffset = -1;
-		return;
-	}
-	cp = g->must;
-	scan = start;
-	for (i = g->mlen; i > 0; i--) {
-		while (OP(s = *scan++) != OCHAR)
-			continue;
-		assert(cp < g->must + g->mlen);
-		*cp++ = (char)OPND(s);
-	}
-	assert(cp == g->must + g->mlen);
-	*cp++ = '\0';		/* just on general principles */
-}
-
-/*
- - altoffset - choose biggest offset among multiple choices
- == static int altoffset(sop *scan, int offset, int mccs);
- *
- * Compute, recursively if necessary, the largest offset among multiple
- * re paths.
- */
-static int
-altoffset(scan, offset, mccs)
-sop *scan;
-int offset;
-int mccs;
-{
-	int largest;
-	int try;
-	sop s;
-
-	/* If we gave up already on offsets, return */
-	if (offset == -1)
-		return -1;
-
-	largest = 0;
-	try = 0;
-	s = *scan++;
-	while (OP(s) != O_QUEST && OP(s) != O_CH) {
-		switch (OP(s)) {
-		case OOR1:
-			if (try > largest)
-				largest = try;
-			try = 0;
-			break;
-		case OQUEST_:
-		case OCH_:
-			try = altoffset(scan, try, mccs);
-			if (try == -1)
-				return -1;
-			scan--;
-			do {
-				scan += OPND(s);
-				s = *scan;
-				if (OP(s) != O_QUEST && OP(s) != O_CH &&
-							OP(s) != OOR2)
-					return -1;
-			} while (OP(s) != O_QUEST && OP(s) != O_CH);
-			/* We must skip to the next position, or we'll
-			 * leave altoffset() too early.
-			 */
-			scan++;
-			break;
-		case OANYOF:
-			if (mccs)
-				return -1;
-		case OCHAR:
-		case OANY:
-			try++;
-		case OBOW:
-		case OEOW:
-		case OLPAREN:
-		case ORPAREN:
-		case OOR2:
-			break;
-		default:
-			try = -1;
-			break;
-		}
-		if (try == -1)
-			return -1;
-		s = *scan++;
-	}
-
-	if (try > largest)
-		largest = try;
-
-	return largest+offset;
-}
-
-/*
- - computejumps - compute char jumps for BM scan
- == static void computejumps(struct parse *p, struct re_guts *g);
- *
- * This algorithm assumes g->must exists and is has size greater than
- * zero. It's based on the algorithm found on Computer Algorithms by
- * Sara Baase.
- *
- * A char jump is the number of characters one needs to jump based on
- * the value of the character from the text that was mismatched.
- */
-static void
-computejumps(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	int ch;
-	int mindex;
-
-	/* Avoid making errors worse */
-	if (p->error != 0)
-		return;
-
-	g->charjump = (int*) malloc((NC + 1) * sizeof(int));
-	if (g->charjump == NULL)	/* Not a fatal error */
-		return;
-	/* Adjust for signed chars, if necessary */
-	g->charjump = &g->charjump[-(CHAR_MIN)];
-
-	/* If the character does not exist in the pattern, the jump
-	 * is equal to the number of characters in the pattern.
-	 */
-	for (ch = CHAR_MIN; ch < (CHAR_MAX + 1); ch++)
-		g->charjump[ch] = g->mlen;
-
-	/* If the character does exist, compute the jump that would
-	 * take us to the last character in the pattern equal to it
-	 * (notice that we match right to left, so that last character
-	 * is the first one that would be matched).
-	 */
-	for (mindex = 0; mindex < g->mlen; mindex++)
-		g->charjump[g->must[mindex]] = g->mlen - mindex - 1;
-}
-
-/*
- - computematchjumps - compute match jumps for BM scan
- == static void computematchjumps(struct parse *p, struct re_guts *g);
- *
- * This algorithm assumes g->must exists and is has size greater than
- * zero. It's based on the algorithm found on Computer Algorithms by
- * Sara Baase.
- *
- * A match jump is the number of characters one needs to advance based
- * on the already-matched suffix.
- * Notice that all values here are minus (g->mlen-1), because of the way
- * the search algorithm works.
- */
-static void
-computematchjumps(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	int mindex;		/* General "must" iterator */
-	int suffix;		/* Keeps track of matching suffix */
-	int ssuffix;		/* Keeps track of suffixes' suffix */
-	int* pmatches;		/* pmatches[k] points to the next i
-				 * such that i+1...mlen is a substring
-				 * of k+1...k+mlen-i-1
-				 */
-
-	/* Avoid making errors worse */
-	if (p->error != 0)
-		return;
-
-	pmatches = (int*) malloc(g->mlen * sizeof(unsigned int));
-	if (pmatches == NULL) {
-		g->matchjump = NULL;
-		return;
-	}
-
-	g->matchjump = (int*) malloc(g->mlen * sizeof(unsigned int));
-	if (g->matchjump == NULL)	/* Not a fatal error */
-		return;
-
-	/* Set maximum possible jump for each character in the pattern */
-	for (mindex = 0; mindex < g->mlen; mindex++)
-		g->matchjump[mindex] = 2*g->mlen - mindex - 1;
-
-	/* Compute pmatches[] */
-	for (mindex = g->mlen - 1, suffix = g->mlen; mindex >= 0;
-	    mindex--, suffix--) {
-		pmatches[mindex] = suffix;
-
-		/* If a mismatch is found, interrupting the substring,
-		 * compute the matchjump for that position. If no
-		 * mismatch is found, then a text substring mismatched
-		 * against the suffix will also mismatch against the
-		 * substring.
-		 */
-		while (suffix < g->mlen
-		    && g->must[mindex] != g->must[suffix]) {
-			g->matchjump[suffix] = MIN(g->matchjump[suffix],
-			    g->mlen - mindex - 1);
-			suffix = pmatches[suffix];
-		}
-	}
-
-	/* Compute the matchjump up to the last substring found to jump
-	 * to the beginning of the largest must pattern prefix matching
-	 * it's own suffix.
-	 */
-	for (mindex = 0; mindex <= suffix; mindex++)
-		g->matchjump[mindex] = MIN(g->matchjump[mindex],
-		    g->mlen + suffix - mindex);
-
-        ssuffix = pmatches[suffix];
-        while (suffix < g->mlen) {
-                while (suffix <= ssuffix && suffix < g->mlen) {
-                        g->matchjump[suffix] = MIN(g->matchjump[suffix],
-			    g->mlen + ssuffix - suffix);
-                        suffix++;
-                }
-		if (suffix < g->mlen)
-                	ssuffix = pmatches[ssuffix];
-        }
-
-	free(pmatches);
-}
-
-/*
- - pluscount - count + nesting
- == static sopno pluscount(struct parse *p, struct re_guts *g);
- */
-static sopno			/* nesting depth */
-pluscount(p, g)
-struct parse *p;
-struct re_guts *g;
-{
-	sop *scan;
-	sop s;
-	sopno plusnest = 0;
-	sopno maxnest = 0;
-
-	if (p->error != 0)
-		return(0);	/* there may not be an OEND */
-
-	scan = g->strip + 1;
-	do {
-		s = *scan++;
-		switch (OP(s)) {
-		case OPLUS_:
-			plusnest++;
-			break;
-		case O_PLUS:
-			if (plusnest > maxnest)
-				maxnest = plusnest;
-			plusnest--;
-			break;
-		}
-	} while (OP(s) != OEND);
-	if (plusnest != 0)
-		g->iflags |= BAD;
-	return(maxnest);
-}
diff --git a/newlib/libc/sys/linux/stdlib/regerror.c b/newlib/libc/sys/linux/stdlib/regerror.c
deleted file mode 100644
index 66b1e5256..000000000
--- a/newlib/libc/sys/linux/stdlib/regerror.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regerror.c	8.4 (Berkeley) 3/20/94
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)regerror.c	8.4 (Berkeley) 3/20/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/regex/regerror.c,v 1.7 2002/03/21 22:48:00 obrien Exp $");
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <string.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <regex.h>
-
-#include "utils.h"
-
-/* ========= begin header generated by ./mkh ========= */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* === regerror.c === */
-static char *regatoi(const regex_t *preg, char *localbuf);
-
-#ifdef __cplusplus
-}
-#endif
-/* ========= end header generated by ./mkh ========= */
-/*
- = #define	REG_NOMATCH	 1
- = #define	REG_BADPAT	 2
- = #define	REG_ECOLLATE	 3
- = #define	REG_ECTYPE	 4
- = #define	REG_EESCAPE	 5
- = #define	REG_ESUBREG	 6
- = #define	REG_EBRACK	 7
- = #define	REG_EPAREN	 8
- = #define	REG_EBRACE	 9
- = #define	REG_BADBR	10
- = #define	REG_ERANGE	11
- = #define	REG_ESPACE	12
- = #define	REG_BADRPT	13
- = #define	REG_EMPTY	14
- = #define	REG_ASSERT	15
- = #define	REG_INVARG	16
- = #define	REG_ATOI	255	// convert name to number (!)
- = #define	REG_ITOA	0400	// convert number to name (!)
- */
-static struct rerr {
-	int code;
-	char *name;
-	char *explain;
-} rerrs[] = {
-	{REG_NOMATCH,	"REG_NOMATCH",	"regexec() failed to match"},
-	{REG_BADPAT,	"REG_BADPAT",	"invalid regular expression"},
-	{REG_ECOLLATE,	"REG_ECOLLATE",	"invalid collating element"},
-	{REG_ECTYPE,	"REG_ECTYPE",	"invalid character class"},
-	{REG_EESCAPE,	"REG_EESCAPE",	"trailing backslash (\\)"},
-	{REG_ESUBREG,	"REG_ESUBREG",	"invalid backreference number"},
-	{REG_EBRACK,	"REG_EBRACK",	"brackets ([ ]) not balanced"},
-	{REG_EPAREN,	"REG_EPAREN",	"parentheses not balanced"},
-	{REG_EBRACE,	"REG_EBRACE",	"braces not balanced"},
-	{REG_BADBR,	"REG_BADBR",	"invalid repetition count(s)"},
-	{REG_ERANGE,	"REG_ERANGE",	"invalid character range"},
-	{REG_ESPACE,	"REG_ESPACE",	"out of memory"},
-	{REG_BADRPT,	"REG_BADRPT",	"repetition-operator operand invalid"},
-	{REG_EMPTY,	"REG_EMPTY",	"empty (sub)expression"},
-	{REG_ASSERT,	"REG_ASSERT",	"\"can't happen\" -- you found a bug"},
-	{REG_INVARG,	"REG_INVARG",	"invalid argument to regex routine"},
-	{0,		"",		"*** unknown regexp error code ***"}
-};
-
-/*
- - regerror - the interface to error numbers
- = extern size_t regerror(int, const regex_t *, char *, size_t);
- */
-/* ARGSUSED */
-size_t
-regerror(errcode, preg, errbuf, errbuf_size)
-int errcode;
-const regex_t *preg;
-char *errbuf;
-size_t errbuf_size;
-{
-	struct rerr *r;
-	size_t len;
-	int target = errcode &~ REG_ITOA;
-	char *s;
-	char convbuf[50];
-
-	if (errcode == REG_ATOI)
-		s = regatoi(preg, convbuf);
-	else {
-		for (r = rerrs; r->code != 0; r++)
-			if (r->code == target)
-				break;
-
-		if (errcode&REG_ITOA) {
-			if (r->code != 0)
-				(void) strcpy(convbuf, r->name);
-			else
-				sprintf(convbuf, "REG_0x%x", target);
-			assert(strlen(convbuf) < sizeof(convbuf));
-			s = convbuf;
-		} else
-			s = r->explain;
-	}
-
-	len = strlen(s) + 1;
-	if (errbuf_size > 0) {
-		if (errbuf_size > len)
-			(void) strcpy(errbuf, s);
-		else {
-			(void) strncpy(errbuf, s, errbuf_size-1);
-			errbuf[errbuf_size-1] = '\0';
-		}
-	}
-
-	return(len);
-}
-
-/*
- - regatoi - internal routine to implement REG_ATOI
- == static char *regatoi(const regex_t *preg, char *localbuf);
- */
-static char *
-regatoi(preg, localbuf)
-const regex_t *preg;
-char *localbuf;
-{
-	struct rerr *r;
-
-	for (r = rerrs; r->code != 0; r++)
-		if (strcmp(r->name, preg->re_endp) == 0)
-			break;
-	if (r->code == 0)
-		return("0");
-
-	sprintf(localbuf, "%d", r->code);
-	return(localbuf);
-}
diff --git a/newlib/libc/sys/linux/stdlib/regex.3 b/newlib/libc/sys/linux/stdlib/regex.3
deleted file mode 100644
index d87164177..000000000
--- a/newlib/libc/sys/linux/stdlib/regex.3
+++ /dev/null
@@ -1,701 +0,0 @@
-.\" Copyright (c) 1992, 1993, 1994 Henry Spencer.
-.\" Copyright (c) 1992, 1993, 1994
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" Henry Spencer.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"	@(#)regex.3	8.4 (Berkeley) 3/20/94
-.\" $FreeBSD: src/lib/libc/regex/regex.3,v 1.9 2001/10/01 16:08:58 ru Exp $
-.\"
-.Dd March 20, 1994
-.Dt REGEX 3
-.Os
-.Sh NAME
-.Nm regcomp ,
-.Nm regexec ,
-.Nm regerror ,
-.Nm regfree
-.Nd regular-expression library
-.Sh LIBRARY
-.Lb libc
-.Sh SYNOPSIS
-.In sys/types.h
-.In regex.h
-.Ft int
-.Fn regcomp "regex_t *preg" "const char *pattern" "int cflags"
-.Ft int
-.Fo regexec
-.Fa "const regex_t *preg" "const char *string"
-.Fa "size_t nmatch" "regmatch_t pmatch[]" "int eflags"
-.Fc
-.Ft size_t
-.Fo regerror
-.Fa "int errcode" "const regex_t *preg"
-.Fa "char *errbuf" "size_t errbuf_size"
-.Fc
-.Ft void
-.Fn regfree "regex_t *preg"
-.Sh DESCRIPTION
-These routines implement
-.St -p1003.2
-regular expressions
-.Pq Do RE Dc Ns s ;
-see
-.Xr re_format 7 .
-.Fn Regcomp
-compiles an RE written as a string into an internal form,
-.Fn regexec
-matches that internal form against a string and reports results,
-.Fn regerror
-transforms error codes from either into human-readable messages,
-and
-.Fn regfree
-frees any dynamically-allocated storage used by the internal form
-of an RE.
-.Pp
-The header
-.Aq Pa regex.h
-declares two structure types,
-.Ft regex_t
-and
-.Ft regmatch_t ,
-the former for compiled internal forms and the latter for match reporting.
-It also declares the four functions,
-a type
-.Ft regoff_t ,
-and a number of constants with names starting with
-.Dq Dv REG_ .
-.Pp
-.Fn Regcomp
-compiles the regular expression contained in the
-.Fa pattern
-string,
-subject to the flags in
-.Fa cflags ,
-and places the results in the
-.Ft regex_t
-structure pointed to by
-.Fa preg .
-.Fa Cflags
-is the bitwise OR of zero or more of the following flags:
-.Bl -tag -width REG_EXTENDED
-.It Dv REG_EXTENDED
-Compile modern
-.Pq Dq extended
-REs,
-rather than the obsolete
-.Pq Dq basic
-REs that
-are the default.
-.It Dv REG_BASIC
-This is a synonym for 0,
-provided as a counterpart to
-.Dv REG_EXTENDED
-to improve readability.
-.It Dv REG_NOSPEC
-Compile with recognition of all special characters turned off.
-All characters are thus considered ordinary,
-so the
-.Dq RE
-is a literal string.
-This is an extension,
-compatible with but not specified by
-.St -p1003.2 ,
-and should be used with
-caution in software intended to be portable to other systems.
-.Dv REG_EXTENDED
-and
-.Dv REG_NOSPEC
-may not be used
-in the same call to
-.Fn regcomp .
-.It Dv REG_ICASE
-Compile for matching that ignores upper/lower case distinctions.
-See
-.Xr re_format 7 .
-.It Dv REG_NOSUB
-Compile for matching that need only report success or failure,
-not what was matched.
-.It Dv REG_NEWLINE
-Compile for newline-sensitive matching.
-By default, newline is a completely ordinary character with no special
-meaning in either REs or strings.
-With this flag,
-.Ql [^
-bracket expressions and
-.Ql .\&
-never match newline,
-a
-.Ql ^\&
-anchor matches the null string after any newline in the string
-in addition to its normal function,
-and the
-.Ql $\&
-anchor matches the null string before any newline in the
-string in addition to its normal function.
-.It Dv REG_PEND
-The regular expression ends,
-not at the first NUL,
-but just before the character pointed to by the
-.Va re_endp
-member of the structure pointed to by
-.Fa preg .
-The
-.Va re_endp
-member is of type
-.Ft "const char *" .
-This flag permits inclusion of NULs in the RE;
-they are considered ordinary characters.
-This is an extension,
-compatible with but not specified by
-.St -p1003.2 ,
-and should be used with
-caution in software intended to be portable to other systems.
-.El
-.Pp
-When successful,
-.Fn regcomp
-returns 0 and fills in the structure pointed to by
-.Fa preg .
-One member of that structure
-(other than
-.Va re_endp )
-is publicized:
-.Va re_nsub ,
-of type
-.Ft size_t ,
-contains the number of parenthesized subexpressions within the RE
-(except that the value of this member is undefined if the
-.Dv REG_NOSUB
-flag was used).
-If
-.Fn regcomp
-fails, it returns a non-zero error code;
-see
-.Sx DIAGNOSTICS .
-.Pp
-.Fn Regexec
-matches the compiled RE pointed to by
-.Fa preg
-against the
-.Fa string ,
-subject to the flags in
-.Fa eflags ,
-and reports results using
-.Fa nmatch ,
-.Fa pmatch ,
-and the returned value.
-The RE must have been compiled by a previous invocation of
-.Fn regcomp .
-The compiled form is not altered during execution of
-.Fn regexec ,
-so a single compiled RE can be used simultaneously by multiple threads.
-.Pp
-By default,
-the NUL-terminated string pointed to by
-.Fa string
-is considered to be the text of an entire line, minus any terminating
-newline.
-The
-.Fa eflags
-argument is the bitwise OR of zero or more of the following flags:
-.Bl -tag -width REG_STARTEND
-.It Dv REG_NOTBOL
-The first character of
-the string
-is not the beginning of a line, so the
-.Ql ^\&
-anchor should not match before it.
-This does not affect the behavior of newlines under
-.Dv REG_NEWLINE .
-.It Dv REG_NOTEOL
-The NUL terminating
-the string
-does not end a line, so the
-.Ql $\&
-anchor should not match before it.
-This does not affect the behavior of newlines under
-.Dv REG_NEWLINE .
-.It Dv REG_STARTEND
-The string is considered to start at
-.Fa string
-+
-.Fa pmatch Ns [0]. Ns Va rm_so
-and to have a terminating NUL located at
-.Fa string
-+
-.Fa pmatch Ns [0]. Ns Va rm_eo
-(there need not actually be a NUL at that location),
-regardless of the value of
-.Fa nmatch .
-See below for the definition of
-.Fa pmatch
-and
-.Fa nmatch .
-This is an extension,
-compatible with but not specified by
-.St -p1003.2 ,
-and should be used with
-caution in software intended to be portable to other systems.
-Note that a non-zero
-.Va rm_so
-does not imply
-.Dv REG_NOTBOL ;
-.Dv REG_STARTEND
-affects only the location of the string,
-not how it is matched.
-.El
-.Pp
-See
-.Xr re_format 7
-for a discussion of what is matched in situations where an RE or a
-portion thereof could match any of several substrings of
-.Fa string .
-.Pp
-Normally,
-.Fn regexec
-returns 0 for success and the non-zero code
-.Dv REG_NOMATCH
-for failure.
-Other non-zero error codes may be returned in exceptional situations;
-see
-.Sx DIAGNOSTICS .
-.Pp
-If
-.Dv REG_NOSUB
-was specified in the compilation of the RE,
-or if
-.Fa nmatch
-is 0,
-.Fn regexec
-ignores the
-.Fa pmatch
-argument (but see below for the case where
-.Dv REG_STARTEND
-is specified).
-Otherwise,
-.Fa pmatch
-points to an array of
-.Fa nmatch
-structures of type
-.Ft regmatch_t .
-Such a structure has at least the members
-.Va rm_so
-and
-.Va rm_eo ,
-both of type
-.Ft regoff_t
-(a signed arithmetic type at least as large as an
-.Ft off_t
-and a
-.Ft ssize_t ) ,
-containing respectively the offset of the first character of a substring
-and the offset of the first character after the end of the substring.
-Offsets are measured from the beginning of the
-.Fa string
-argument given to
-.Fn regexec .
-An empty substring is denoted by equal offsets,
-both indicating the character following the empty substring.
-.Pp
-The 0th member of the
-.Fa pmatch
-array is filled in to indicate what substring of
-.Fa string
-was matched by the entire RE.
-Remaining members report what substring was matched by parenthesized
-subexpressions within the RE;
-member
-.Va i
-reports subexpression
-.Va i ,
-with subexpressions counted (starting at 1) by the order of their opening
-parentheses in the RE, left to right.
-Unused entries in the array (corresponding either to subexpressions that
-did not participate in the match at all, or to subexpressions that do not
-exist in the RE (that is,
-.Va i
->
-.Fa preg Ns -> Ns Va re_nsub ) )
-have both
-.Va rm_so
-and
-.Va rm_eo
-set to -1.
-If a subexpression participated in the match several times,
-the reported substring is the last one it matched.
-(Note, as an example in particular, that when the RE
-.Ql "(b*)+"
-matches
-.Ql bbb ,
-the parenthesized subexpression matches each of the three
-.So Li b Sc Ns s
-and then
-an infinite number of empty strings following the last
-.Ql b ,
-so the reported substring is one of the empties.)
-.Pp
-If
-.Dv REG_STARTEND
-is specified,
-.Fa pmatch
-must point to at least one
-.Ft regmatch_t
-(even if
-.Fa nmatch
-is 0 or
-.Dv REG_NOSUB
-was specified),
-to hold the input offsets for
-.Dv REG_STARTEND .
-Use for output is still entirely controlled by
-.Fa nmatch ;
-if
-.Fa nmatch
-is 0 or
-.Dv REG_NOSUB
-was specified,
-the value of
-.Fa pmatch Ns [0]
-will not be changed by a successful
-.Fn regexec .
-.Pp
-.Fn Regerror
-maps a non-zero
-.Fa errcode
-from either
-.Fn regcomp
-or
-.Fn regexec
-to a human-readable, printable message.
-If
-.Fa preg
-is
-.No non\- Ns Dv NULL ,
-the error code should have arisen from use of
-the
-.Ft regex_t
-pointed to by
-.Fa preg ,
-and if the error code came from
-.Fn regcomp ,
-it should have been the result from the most recent
-.Fn regcomp
-using that
-.Ft regex_t .
-.No ( Fn Regerror
-may be able to supply a more detailed message using information
-from the
-.Ft regex_t . )
-.Fn Regerror
-places the NUL-terminated message into the buffer pointed to by
-.Fa errbuf ,
-limiting the length (including the NUL) to at most
-.Fa errbuf_size
-bytes.
-If the whole message won't fit,
-as much of it as will fit before the terminating NUL is supplied.
-In any case,
-the returned value is the size of buffer needed to hold the whole
-message (including terminating NUL).
-If
-.Fa errbuf_size
-is 0,
-.Fa errbuf
-is ignored but the return value is still correct.
-.Pp
-If the
-.Fa errcode
-given to
-.Fn regerror
-is first ORed with
-.Dv REG_ITOA ,
-the
-.Dq message
-that results is the printable name of the error code,
-e.g.\&
-.Dq Dv REG_NOMATCH ,
-rather than an explanation thereof.
-If
-.Fa errcode
-is
-.Dv REG_ATOI ,
-then
-.Fa preg
-shall be
-.No non\- Ns Dv NULL
-and the
-.Va re_endp
-member of the structure it points to
-must point to the printable name of an error code;
-in this case, the result in
-.Fa errbuf
-is the decimal digits of
-the numeric value of the error code
-(0 if the name is not recognized).
-.Dv REG_ITOA
-and
-.Dv REG_ATOI
-are intended primarily as debugging facilities;
-they are extensions,
-compatible with but not specified by
-.St -p1003.2 ,
-and should be used with
-caution in software intended to be portable to other systems.
-Be warned also that they are considered experimental and changes are possible.
-.Pp
-.Fn Regfree
-frees any dynamically-allocated storage associated with the compiled RE
-pointed to by
-.Fa preg .
-The remaining
-.Ft regex_t
-is no longer a valid compiled RE
-and the effect of supplying it to
-.Fn regexec
-or
-.Fn regerror
-is undefined.
-.Pp
-None of these functions references global variables except for tables
-of constants;
-all are safe for use from multiple threads if the arguments are safe.
-.Sh IMPLEMENTATION CHOICES
-There are a number of decisions that
-.St -p1003.2
-leaves up to the implementor,
-either by explicitly saying
-.Dq undefined
-or by virtue of them being
-forbidden by the RE grammar.
-This implementation treats them as follows.
-.Pp
-See
-.Xr re_format 7
-for a discussion of the definition of case-independent matching.
-.Pp
-There is no particular limit on the length of REs,
-except insofar as memory is limited.
-Memory usage is approximately linear in RE size, and largely insensitive
-to RE complexity, except for bounded repetitions.
-See
-.Sx BUGS
-for one short RE using them
-that will run almost any system out of memory.
-.Pp
-A backslashed character other than one specifically given a magic meaning
-by
-.St -p1003.2
-(such magic meanings occur only in obsolete
-.Bq Dq basic
-REs)
-is taken as an ordinary character.
-.Pp
-Any unmatched
-.Ql [\&
-is a
-.Dv REG_EBRACK
-error.
-.Pp
-Equivalence classes cannot begin or end bracket-expression ranges.
-The endpoint of one range cannot begin another.
-.Pp
-.Dv RE_DUP_MAX ,
-the limit on repetition counts in bounded repetitions, is 255.
-.Pp
-A repetition operator
-.Ql ( ?\& ,
-.Ql *\& ,
-.Ql +\& ,
-or bounds)
-cannot follow another
-repetition operator.
-A repetition operator cannot begin an expression or subexpression
-or follow
-.Ql ^\&
-or
-.Ql |\& .
-.Pp
-.Ql |\&
-cannot appear first or last in a (sub)expression or after another
-.Ql |\& ,
-i.e. an operand of
-.Ql |\&
-cannot be an empty subexpression.
-An empty parenthesized subexpression,
-.Ql "()" ,
-is legal and matches an
-empty (sub)string.
-An empty string is not a legal RE.
-.Pp
-A
-.Ql {\&
-followed by a digit is considered the beginning of bounds for a
-bounded repetition, which must then follow the syntax for bounds.
-A
-.Ql {\&
-.Em not
-followed by a digit is considered an ordinary character.
-.Pp
-.Ql ^\&
-and
-.Ql $\&
-beginning and ending subexpressions in obsolete
-.Pq Dq basic
-REs are anchors, not ordinary characters.
-.Sh SEE ALSO
-.Xr grep 1 ,
-.Xr re_format 7
-.Pp
-.St -p1003.2 ,
-sections 2.8 (Regular Expression Notation)
-and
-B.5 (C Binding for Regular Expression Matching).
-.Sh DIAGNOSTICS
-Non-zero error codes from
-.Fn regcomp
-and
-.Fn regexec
-include the following:
-.Pp
-.Bl -tag -width REG_ECOLLATE -compact
-.It Dv REG_NOMATCH
-.Fn regexec
-failed to match
-.It Dv REG_BADPAT
-invalid regular expression
-.It Dv REG_ECOLLATE
-invalid collating element
-.It Dv REG_ECTYPE
-invalid character class
-.It Dv REG_EESCAPE
-.Ql \e
-applied to unescapable character
-.It Dv REG_ESUBREG
-invalid backreference number
-.It Dv REG_EBRACK
-brackets
-.Ql "[ ]"
-not balanced
-.It Dv REG_EPAREN
-parentheses
-.Ql "( )"
-not balanced
-.It Dv REG_EBRACE
-braces
-.Ql "{ }"
-not balanced
-.It Dv REG_BADBR
-invalid repetition count(s) in
-.Ql "{ }"
-.It Dv REG_ERANGE
-invalid character range in
-.Ql "[ ]"
-.It Dv REG_ESPACE
-ran out of memory
-.It Dv REG_BADRPT
-.Ql ?\& ,
-.Ql *\& ,
-or
-.Ql +\&
-operand invalid
-.It Dv REG_EMPTY
-empty (sub)expression
-.It Dv REG_ASSERT
-can't happen - you found a bug
-.It Dv REG_INVARG
-invalid argument, e.g. negative-length string
-.El
-.Sh HISTORY
-Originally written by
-.An Henry Spencer .
-Altered for inclusion in the
-.Bx 4.4
-distribution.
-.Sh BUGS
-This is an alpha release with known defects.
-Please report problems.
-.Pp
-The back-reference code is subtle and doubts linger about its correctness
-in complex cases.
-.Pp
-.Fn Regexec
-performance is poor.
-This will improve with later releases.
-.Fa Nmatch
-exceeding 0 is expensive;
-.Fa nmatch
-exceeding 1 is worse.
-.Fn Regexec
-is largely insensitive to RE complexity
-.Em except
-that back
-references are massively expensive.
-RE length does matter; in particular, there is a strong speed bonus
-for keeping RE length under about 30 characters,
-with most special characters counting roughly double.
-.Pp
-.Fn Regcomp
-implements bounded repetitions by macro expansion,
-which is costly in time and space if counts are large
-or bounded repetitions are nested.
-An RE like, say,
-.Ql "((((a{1,100}){1,100}){1,100}){1,100}){1,100}"
-will (eventually) run almost any existing machine out of swap space.
-.Pp
-There are suspected problems with response to obscure error conditions.
-Notably,
-certain kinds of internal overflow,
-produced only by truly enormous REs or by multiply nested bounded repetitions,
-are probably not handled well.
-.Pp
-Due to a mistake in
-.St -p1003.2 ,
-things like
-.Ql "a)b"
-are legal REs because
-.Ql )\&
-is
-a special character only in the presence of a previous unmatched
-.Ql (\& .
-This can't be fixed until the spec is fixed.
-.Pp
-The standard's definition of back references is vague.
-For example, does
-.Ql "a\e(\e(b\e)*\e2\e)*d"
-match
-.Ql "abbbd" ?
-Until the standard is clarified,
-behavior in such cases should not be relied on.
-.Pp
-The implementation of word-boundary matching is a bit of a kludge,
-and bugs may lurk in combinations of word-boundary matching and anchoring.
diff --git a/newlib/libc/sys/linux/stdlib/regex2.h b/newlib/libc/sys/linux/stdlib/regex2.h
deleted file mode 100644
index 303b7f7b3..000000000
--- a/newlib/libc/sys/linux/stdlib/regex2.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regex2.h	8.4 (Berkeley) 3/20/94
- * $FreeBSD: src/lib/libc/regex/regex2.h,v 1.6 2002/03/22 23:41:56 obrien Exp $
- */
-
-/*
- * First, the stuff that ends up in the outside-world include file
- = typedef off_t regoff_t;
- = typedef struct {
- = 	int re_magic;
- = 	size_t re_nsub;		// number of parenthesized subexpressions
- = 	const char *re_endp;	// end pointer for REG_PEND
- = 	struct re_guts *re_g;	// none of your business :-)
- = } regex_t;
- = typedef struct {
- = 	regoff_t rm_so;		// start of match
- = 	regoff_t rm_eo;		// end of match
- = } regmatch_t;
- */
-/*
- * internals of regex_t
- */
-#define	MAGIC1	((('r'^0200)<<8) | 'e')
-
-/*
- * The internal representation is a *strip*, a sequence of
- * operators ending with an endmarker.  (Some terminology etc. is a
- * historical relic of earlier versions which used multiple strips.)
- * Certain oddities in the representation are there to permit running
- * the machinery backwards; in particular, any deviation from sequential
- * flow must be marked at both its source and its destination.  Some
- * fine points:
- *
- * - OPLUS_ and O_PLUS are *inside* the loop they create.
- * - OQUEST_ and O_QUEST are *outside* the bypass they create.
- * - OCH_ and O_CH are *outside* the multi-way branch they create, while
- *   OOR1 and OOR2 are respectively the end and the beginning of one of
- *   the branches.  Note that there is an implicit OOR2 following OCH_
- *   and an implicit OOR1 preceding O_CH.
- *
- * In state representations, an operator's bit is on to signify a state
- * immediately *preceding* "execution" of that operator.
- */
-typedef unsigned long sop;	/* strip operator */
-typedef long sopno;
-#define	OPRMASK	0xf8000000L
-#define	OPDMASK	0x07ffffffL
-#define	OPSHIFT	((unsigned)27)
-#define	OP(n)	((n)&OPRMASK)
-#define	OPND(n)	((n)&OPDMASK)
-#define	SOP(op, opnd)	((op)|(opnd))
-/* operators			   meaning	operand			*/
-/*						(back, fwd are offsets)	*/
-#define	OEND	(1L<<OPSHIFT)	/* endmarker	-			*/
-#define	OCHAR	(2L<<OPSHIFT)	/* character	unsigned char		*/
-#define	OBOL	(3L<<OPSHIFT)	/* left anchor	-			*/
-#define	OEOL	(4L<<OPSHIFT)	/* right anchor	-			*/
-#define	OANY	(5L<<OPSHIFT)	/* .		-			*/
-#define	OANYOF	(6L<<OPSHIFT)	/* [...]	set number		*/
-#define	OBACK_	(7L<<OPSHIFT)	/* begin \d	paren number		*/
-#define	O_BACK	(8L<<OPSHIFT)	/* end \d	paren number		*/
-#define	OPLUS_	(9L<<OPSHIFT)	/* + prefix	fwd to suffix		*/
-#define	O_PLUS	(10L<<OPSHIFT)	/* + suffix	back to prefix		*/
-#define	OQUEST_	(11L<<OPSHIFT)	/* ? prefix	fwd to suffix		*/
-#define	O_QUEST	(12L<<OPSHIFT)	/* ? suffix	back to prefix		*/
-#define	OLPAREN	(13L<<OPSHIFT)	/* (		fwd to )		*/
-#define	ORPAREN	(14L<<OPSHIFT)	/* )		back to (		*/
-#define	OCH_	(15L<<OPSHIFT)	/* begin choice	fwd to OOR2		*/
-#define	OOR1	(16L<<OPSHIFT)	/* | pt. 1	back to OOR1 or OCH_	*/
-#define	OOR2	(17L<<OPSHIFT)	/* | pt. 2	fwd to OOR2 or O_CH	*/
-#define	O_CH	(18L<<OPSHIFT)	/* end choice	back to OOR1		*/
-#define	OBOW	(19L<<OPSHIFT)	/* begin word	-			*/
-#define	OEOW	(20L<<OPSHIFT)	/* end word	-			*/
-
-/*
- * Structure for [] character-set representation.  Character sets are
- * done as bit vectors, grouped 8 to a byte vector for compactness.
- * The individual set therefore has both a pointer to the byte vector
- * and a mask to pick out the relevant bit of each byte.  A hash code
- * simplifies testing whether two sets could be identical.
- *
- * This will get trickier for multicharacter collating elements.  As
- * preliminary hooks for dealing with such things, we also carry along
- * a string of multi-character elements, and decide the size of the
- * vectors at run time.
- */
-typedef struct {
-	uch *ptr;		/* -> uch [csetsize] */
-	uch mask;		/* bit within array */
-	short hash;             /* hash code */
-	size_t smultis;
-	char *multis;		/* -> char[smulti]  ab\0cd\0ef\0\0 */
-} cset;
-/* note that CHadd and CHsub are unsafe, and CHIN doesn't yield 0/1 */
-#define CHadd(cs, c)    ((cs)->ptr[(uch)(c)] |= (cs)->mask, (cs)->hash += (uch)(c))
-#define CHsub(cs, c)    ((cs)->ptr[(uch)(c)] &= ~(cs)->mask, (cs)->hash -= (uch)(c))
-#define	CHIN(cs, c)	((cs)->ptr[(uch)(c)] & (cs)->mask)
-#define	MCadd(p, cs, cp)	mcadd(p, cs, cp)	/* regcomp() internal fns */
-#define	MCsub(p, cs, cp)	mcsub(p, cs, cp)
-#define	MCin(p, cs, cp)	mcin(p, cs, cp)
-
-/* stuff for character categories */
-typedef unsigned char cat_t;
-
-/*
- * main compiled-expression structure
- */
-struct re_guts {
-	int magic;
-#		define	MAGIC2	((('R'^0200)<<8)|'E')
-	sop *strip;		/* malloced area for strip */
-	int csetsize;		/* number of bits in a cset vector */
-	int ncsets;		/* number of csets in use */
-	cset *sets;		/* -> cset [ncsets] */
-	uch *setbits;		/* -> uch[csetsize][ncsets/CHAR_BIT] */
-	int cflags;		/* copy of regcomp() cflags argument */
-	sopno nstates;		/* = number of sops */
-	sopno firststate;	/* the initial OEND (normally 0) */
-	sopno laststate;	/* the final OEND */
-	int iflags;		/* internal flags */
-#		define	USEBOL	01	/* used ^ */
-#		define	USEEOL	02	/* used $ */
-#		define	BAD	04	/* something wrong */
-	int nbol;		/* number of ^ used */
-	int neol;		/* number of $ used */
-	int ncategories;	/* how many character categories */
-	cat_t *categories;	/* ->catspace[-CHAR_MIN] */
-	char *must;		/* match must contain this string */
-	int moffset;		/* latest point at which must may be located */
-	int *charjump;		/* Boyer-Moore char jump table */
-	int *matchjump;		/* Boyer-Moore match jump table */
-	int mlen;		/* length of must */
-	size_t nsub;		/* copy of re_nsub */
-	int backrefs;		/* does it use back references? */
-	sopno nplus;		/* how deep does it nest +s? */
-	/* catspace must be last */
-	cat_t catspace[1];	/* actually [NC] */
-};
-
-/* misc utilities */
-#define	OUT	(CHAR_MAX+1)	/* a non-character value */
-#define ISWORD(c)       (isalnum((uch)(c)) || (c) == '_')
diff --git a/newlib/libc/sys/linux/stdlib/regexec.c b/newlib/libc/sys/linux/stdlib/regexec.c
deleted file mode 100644
index 4f3bb509f..000000000
--- a/newlib/libc/sys/linux/stdlib/regexec.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regexec.c	8.3 (Berkeley) 3/20/94
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)regexec.c	8.3 (Berkeley) 3/20/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/regex/regexec.c,v 1.3 2002/03/21 18:41:51 obrien Exp $");
-
-/*
- * the outer shell of regexec()
- *
- * This file includes engine.c *twice*, after muchos fiddling with the
- * macros that code uses.  This lets the same code operate on two different
- * representations for state sets.
- */
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include <ctype.h>
-#include <regex.h>
-
-#include "utils.h"
-#include "regex2.h"
-
-static int nope = 0;		/* for use in asserts; shuts lint up */
-
-/* macros for manipulating states, small version */
-#define	states	long
-#define	states1	states		/* for later use in regexec() decision */
-#define	CLEAR(v)	((v) = 0)
-#define	SET0(v, n)	((v) &= ~((unsigned long)1 << (n)))
-#define	SET1(v, n)	((v) |= (unsigned long)1 << (n))
-#define	ISSET(v, n)	(((v) & ((unsigned long)1 << (n))) != 0)
-#define	ASSIGN(d, s)	((d) = (s))
-#define	EQ(a, b)	((a) == (b))
-#define	STATEVARS	long dummy	/* dummy version */
-#define	STATESETUP(m, n)	/* nothing */
-#define	STATETEARDOWN(m)	/* nothing */
-#define	SETUP(v)	((v) = 0)
-#define	onestate	long
-#define	INIT(o, n)	((o) = (unsigned long)1 << (n))
-#define	INC(o)	((o) <<= 1)
-#define	ISSTATEIN(v, o)	(((v) & (o)) != 0)
-/* some abbreviations; note that some of these know variable names! */
-/* do "if I'm here, I can also be there" etc without branches */
-#define	FWD(dst, src, n)	((dst) |= ((unsigned long)(src)&(here)) << (n))
-#define	BACK(dst, src, n)	((dst) |= ((unsigned long)(src)&(here)) >> (n))
-#define	ISSETBACK(v, n)	(((v) & ((unsigned long)here >> (n))) != 0)
-/* function names */
-#define SNAMES			/* engine.c looks after details */
-
-#include "engine.c"
-
-/* now undo things */
-#undef	states
-#undef	CLEAR
-#undef	SET0
-#undef	SET1
-#undef	ISSET
-#undef	ASSIGN
-#undef	EQ
-#undef	STATEVARS
-#undef	STATESETUP
-#undef	STATETEARDOWN
-#undef	SETUP
-#undef	onestate
-#undef	INIT
-#undef	INC
-#undef	ISSTATEIN
-#undef	FWD
-#undef	BACK
-#undef	ISSETBACK
-#undef	SNAMES
-
-/* macros for manipulating states, large version */
-#define	states	char *
-#define	CLEAR(v)	memset(v, 0, m->g->nstates)
-#define	SET0(v, n)	((v)[n] = 0)
-#define	SET1(v, n)	((v)[n] = 1)
-#define	ISSET(v, n)	((v)[n])
-#define	ASSIGN(d, s)	memcpy(d, s, m->g->nstates)
-#define	EQ(a, b)	(memcmp(a, b, m->g->nstates) == 0)
-#define	STATEVARS	long vn; char *space
-#define	STATESETUP(m, nv)	{ (m)->space = malloc((nv)*(m)->g->nstates); \
-				if ((m)->space == NULL) return(REG_ESPACE); \
-				(m)->vn = 0; }
-#define	STATETEARDOWN(m)	{ free((m)->space); }
-#define	SETUP(v)	((v) = &m->space[m->vn++ * m->g->nstates])
-#define	onestate	long
-#define	INIT(o, n)	((o) = (n))
-#define	INC(o)	((o)++)
-#define	ISSTATEIN(v, o)	((v)[o])
-/* some abbreviations; note that some of these know variable names! */
-/* do "if I'm here, I can also be there" etc without branches */
-#define	FWD(dst, src, n)	((dst)[here+(n)] |= (src)[here])
-#define	BACK(dst, src, n)	((dst)[here-(n)] |= (src)[here])
-#define	ISSETBACK(v, n)	((v)[here - (n)])
-/* function names */
-#define	LNAMES			/* flag */
-
-#include "engine.c"
-
-/*
- - regexec - interface for matching
- = extern int regexec(const regex_t *, const char *, size_t, \
- =					regmatch_t [], int);
- = #define	REG_NOTBOL	00001
- = #define	REG_NOTEOL	00002
- = #define	REG_STARTEND	00004
- = #define	REG_TRACE	00400	// tracing of execution
- = #define	REG_LARGE	01000	// force large representation
- = #define	REG_BACKR	02000	// force use of backref code
- *
- * We put this here so we can exploit knowledge of the state representation
- * when choosing which matcher to call.  Also, by this point the matchers
- * have been prototyped.
- */
-int				/* 0 success, REG_NOMATCH failure */
-regexec(preg, string, nmatch, pmatch, eflags)
-const regex_t *preg;
-const char *string;
-size_t nmatch;
-regmatch_t pmatch[];
-int eflags;
-{
-	struct re_guts *g = preg->re_g;
-#ifdef REDEBUG
-#	define	GOODFLAGS(f)	(f)
-#else
-#	define	GOODFLAGS(f)	((f)&(REG_NOTBOL|REG_NOTEOL|REG_STARTEND))
-#endif
-
-	if (preg->re_magic != MAGIC1 || g->magic != MAGIC2)
-		return(REG_BADPAT);
-	assert(!(g->iflags&BAD));
-	if (g->iflags&BAD)		/* backstop for no-debug case */
-		return(REG_BADPAT);
-	eflags = GOODFLAGS(eflags);
-
-	if (g->nstates <= CHAR_BIT*sizeof(states1) && !(eflags&REG_LARGE))
-		return(smatcher(g, (char *)string, nmatch, pmatch, eflags));
-	else
-		return(lmatcher(g, (char *)string, nmatch, pmatch, eflags));
-}
diff --git a/newlib/libc/sys/linux/stdlib/regfree.c b/newlib/libc/sys/linux/stdlib/regfree.c
deleted file mode 100644
index 82119d31d..000000000
--- a/newlib/libc/sys/linux/stdlib/regfree.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)regfree.c	8.3 (Berkeley) 3/20/94
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)regfree.c	8.3 (Berkeley) 3/20/94";
-#endif /* LIBC_SCCS and not lint */
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/lib/libc/regex/regfree.c,v 1.5 2002/03/22 21:52:47 obrien Exp $");
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <regex.h>
-
-#include "utils.h"
-#include "regex2.h"
-
-/*
- - regfree - free everything
- = extern void regfree(regex_t *);
- */
-void
-regfree(preg)
-regex_t *preg;
-{
-	struct re_guts *g;
-
-	if (preg->re_magic != MAGIC1)	/* oops */
-		return;			/* nice to complain, but hard */
-
-	g = preg->re_g;
-	if (g == NULL || g->magic != MAGIC2)	/* oops again */
-		return;
-	preg->re_magic = 0;		/* mark it invalid */
-	g->magic = 0;			/* mark it invalid */
-
-	if (g->strip != NULL)
-		free((char *)g->strip);
-	if (g->sets != NULL)
-		free((char *)g->sets);
-	if (g->setbits != NULL)
-		free((char *)g->setbits);
-	if (g->must != NULL)
-		free(g->must);
-	if (g->charjump != NULL)
-		free(&g->charjump[CHAR_MIN]);
-	if (g->matchjump != NULL)
-		free(g->matchjump);
-	free((char *)g);
-}
diff --git a/newlib/libc/sys/linux/stdlib/utils.h b/newlib/libc/sys/linux/stdlib/utils.h
deleted file mode 100644
index 5439b6cd4..000000000
--- a/newlib/libc/sys/linux/stdlib/utils.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*-
- * Copyright (c) 1992, 1993, 1994 Henry Spencer.
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Henry Spencer.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)utils.h	8.3 (Berkeley) 3/20/94
- * $FreeBSD: src/lib/libc/regex/utils.h,v 1.2 2002/03/22 23:41:56 obrien Exp $
- */
-
-/* utility definitions */
-#define	DUPMAX		_POSIX2_RE_DUP_MAX	/* xxx is this right? */
-#define	INFINITY	(DUPMAX + 1)
-#define	NC		(CHAR_MAX - CHAR_MIN + 1)
-typedef unsigned char uch;
-
-/* switch off assertions (if not already off) if no REDEBUG */
-#ifndef REDEBUG
-#ifndef NDEBUG
-#define	NDEBUG	/* no assertions please */
-#endif
-#endif
-#include <assert.h>
-
-/* for old systems with bcopy() but no memmove() */
-#ifdef USEBCOPY
-#define	memmove(d, s, c)	bcopy(s, d, c)
-#endif
diff --git a/newlib/libc/sys/linux/stdlib/wordexp.c b/newlib/libc/sys/linux/stdlib/wordexp.c
deleted file mode 100644
index 3928b857e..000000000
--- a/newlib/libc/sys/linux/stdlib/wordexp.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <sys/param.h>
-#include <sys/stat.h>
-
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <glob.h>
-#include <pwd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/wait.h>
-
-#include <wordexp.h>
-
-#define MAXLINELEN 500
-
-/* Note: This implementation of wordexp requires a version of bash
-   that supports the --wordexp and --protected arguments to be present
-   on the system.  It does not support the WRDE_UNDEF flag. */
-int
-wordexp(const char *words, wordexp_t *pwordexp, int flags)
-{
-  FILE *f;
-  FILE *f_err;
-  char tmp[MAXLINELEN];
-  int i = 0;
-  int offs = 0;
-  char *iter;
-  pid_t pid;
-  int num_words = 0;
-  int num_bytes = 0;
-  int fd[2];
-  int fd_err[2];
-  int err = 0;
-
-  if (pwordexp == NULL)
-    {
-      return WRDE_NOSPACE;
-    }
-
-  if (flags & WRDE_REUSE)
-    wordfree(pwordexp);
-
-  if ((flags & WRDE_APPEND) == 0)
-    {
-      pwordexp->we_wordc = 0;
-      pwordexp->we_wordv = NULL;
-    }
-
-  if (flags & WRDE_DOOFFS)
-    {
-      offs = pwordexp->we_offs;
-
-      if(!(pwordexp->we_wordv = (char **)realloc(pwordexp->we_wordv, (pwordexp->we_wordc + offs + 1) * sizeof(char *))))
-        return WRDE_NOSPACE;
-
-      for (i = 0; i < offs; i++)
-        pwordexp->we_wordv[i] = NULL;
-    }
-
-  pipe(fd);
-  pipe(fd_err);
-  pid = fork();
-
-  if (pid > 0)
-    {
-      /* In parent process. */
-
-      /* Close write end of parent's pipe. */
-      close(fd[1]);
-      close(fd_err[1]);
-
-      /* f_err is the standard error from the shell command. */
-      f_err = fdopen(fd_err[0], "r");
-
-      /* Check for errors. */
-      if (fgets(tmp, MAXLINELEN, f_err))
-        {
-          if (strstr(tmp, "EOF"))
-            err = WRDE_SYNTAX;
-          else if (strstr(tmp, "`\n'") || strstr(tmp, "`|'")
-                   || strstr(tmp, "`&'") || strstr(tmp, "`;'")
-                   || strstr(tmp, "`<'") || strstr(tmp, "`>'")
-                   || strstr(tmp, "`('") || strstr(tmp, "`)'")
-                   || strstr(tmp, "`{'") || strstr(tmp, "`}'"))
-            err = WRDE_BADCHAR;
-          else if (strstr(tmp, "command substitution"))
-            err = WRDE_CMDSUB;
-          else
-            err = WRDE_SYNTAX;
-
-          if (flags & WRDE_SHOWERR)
-            {
-              fprintf(stderr, tmp);
-              while(fgets(tmp, MAXLINELEN, f_err))
-                fprintf(stderr, tmp);
-            }
-
-          return err;
-        }
-
-      /* f is the standard output from the shell command. */
-      f = fdopen(fd[0], "r");
-
-      /* Get number of words expanded by shell. */
-      fgets(tmp, MAXLINELEN, f);
-
-      if((iter = strchr(tmp, '\n')))
-          *iter = '\0';
-
-      num_words = atoi(tmp);
-
-      if(!(pwordexp->we_wordv = (char **)realloc(pwordexp->we_wordv,
-                                                 (pwordexp->we_wordc + num_words + offs + 1) * sizeof(char *))))
-        return WRDE_NOSPACE;
-
-      /* Get number of bytes required for storage of num_words words. */
-      fgets(tmp, MAXLINELEN, f);
-
-      if((iter = strchr(tmp, '\n')))
-          *iter = '\0';
-
-      num_bytes = atoi(tmp) + pwordexp->we_wordc;
-
-      /* Get each expansion from the shell output, and store each in
-         pwordexp's we_wordv vector. */
-      for(i = 0; i < num_words; i++)
-        {
-          fgets(tmp, MAXLINELEN, f);
-
-          if((iter = strchr(tmp, '\n')))
-            *iter = '\0';
-
-          pwordexp->we_wordv[pwordexp->we_wordc + offs + i] = strdup(tmp);
-        }
-
-      pwordexp->we_wordv[pwordexp->we_wordc + offs + i] = NULL;
-      pwordexp->we_wordc += num_words;
-
-      close(fd[0]);
-      close(fd_err[0]);
-
-      /* Wait for child to finish. */
-      waitpid (pid, NULL, 0);
-
-      return WRDE_SUCCESS;
-    }
-  else
-    {
-      /* In child process. */
-
-      /* Close read end of child's pipe. */
-      close(fd[0]);
-      close(fd_err[0]);
-
-      /* Pipe standard output to parent process via fd. */
-      if (fd[1] != STDOUT_FILENO)
-        {
-          dup2(fd[1], STDOUT_FILENO);
-          /* fd[1] no longer required. */
-          close(fd[1]);
-        }
-
-      /* Pipe standard error to parent process via fd_err. */
-      if (fd_err[1] != STDERR_FILENO)
-        {
-          dup2(fd_err[1], STDERR_FILENO);
-          /* fd_err[1] no longer required. */
-          close(fd_err[1]);
-        }
-
-      if (flags & WRDE_NOCMD)
-        execl("/bin/bash", "bash", "--protected", "--wordexp", words, (char *)0);
-      else
-        execl("/bin/bash", "bash", "--wordexp", words, (char *)0);
-    }
-  return WRDE_SUCCESS;
-}
diff --git a/newlib/libc/sys/linux/stdlib/wordfree.c b/newlib/libc/sys/linux/stdlib/wordfree.c
deleted file mode 100644
index 1b6ee1e28..000000000
--- a/newlib/libc/sys/linux/stdlib/wordfree.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <sys/param.h>
-#include <sys/stat.h>
-
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <glob.h>
-#include <pwd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include <wordexp.h>
-
-void
-wordfree(wordexp_t *pwordexp)
-{
-  int i;
-
-  if (pwordexp == NULL)
-    return;
-
-  if (pwordexp->we_wordv == NULL)
-    return;
-
-  for(i = 0; i < pwordexp->we_wordc; i++)
-    free(pwordexp->we_wordv[i]);
-
-  free(pwordexp->we_wordv);
-  pwordexp->we_wordv = NULL;
-}
diff --git a/newlib/libc/sys/linux/strsignal.c b/newlib/libc/sys/linux/strsignal.c
deleted file mode 100644
index 3f95e18a7..000000000
--- a/newlib/libc/sys/linux/strsignal.c
+++ /dev/null
@@ -1,63 +0,0 @@
-#include <string.h>
-#include <signal.h>
-#include <stdio.h>
-#include <reent.h>
-
-static const char *sigstring[] =
-  {
-    "Signal 0",
-    "Hangup",
-    "Interrupt",
-    "Quit",
-    "Illegal instruction",
-    "Trace/breakpoint trap",
-    "IOT trap",
-    "EMT trap",
-    "Floating point exception",
-    "Killed",
-    "Bus error",
-    "Segmentation fault",
-    "Bad system call",
-    "Broken pipe",
-    "Alarm clock",
-    "Terminated",
-    "Urgent I/O condition",
-    "Stopped (signal)",
-    "Stopped",
-    "Continued",
-    "Child exited",
-    "Stopped (tty input)",
-    "Stopped (tty output)",
-    "I/O possible",
-    "CPU time limit exceeded",
-    "File size limit exceeded",
-    "Virtual timer expired",
-    "Profiling timer expired",
-    "Window changed",
-    "Resource lost",
-    "User defined signal 1",
-    "User defined signal 2"
-  };
-
-char *
-strsignal (int sig)
-{
-  if (sig < 0 || sig >= __SIGRTMIN)
-    {
-      char *buffer;
-      struct _reent *ptr;
-
-      ptr = _REENT;
-
-      _REENT_CHECK_SIGNAL_BUF(ptr);
-      buffer = _REENT_SIGNAL_BUF(ptr);
-
-      if (sig < 0 || sig > __SIGRTMAX)
-        siprintf (buffer, "Unknown signal %d", sig);
-      else
-        siprintf (buffer, "Real-time signal %d", sig - __SIGRTMIN);
-      return buffer;
-    }
-  else
-    return sigstring[sig];
-}
diff --git a/newlib/libc/sys/linux/strverscmp.c b/newlib/libc/sys/linux/strverscmp.c
deleted file mode 100644
index 2a9cbf48a..000000000
--- a/newlib/libc/sys/linux/strverscmp.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Compare strings while treating digits characters numerically.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Jean-François Bignolles <bignolle@ecoledoc.ibp.fr>, 1997.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <string.h>
-#include <ctype.h>
-#include <machine/weakalias.h>
-
-/* states: S_N: normal, S_I: comparing integral part, S_F: comparing
-           fractionnal parts, S_Z: idem but with leading Zeroes only */
-#define  S_N    0x0
-#define  S_I    0x4
-#define  S_F    0x8
-#define  S_Z    0xC
-
-/* result_type: CMP: return diff; LEN: compare using len_diff/diff */
-#define  CMP    2
-#define  LEN    3
-
-
-/* Compare S1 and S2 as strings holding indices/version numbers,
-   returning less than, equal to or greater than zero if S1 is less than,
-   equal to or greater than S2 (for more info, see the texinfo doc).
-*/
-
-int
-__strverscmp (s1, s2)
-     const char *s1;
-     const char *s2;
-{
-  const unsigned char *p1 = (const unsigned char *) s1;
-  const unsigned char *p2 = (const unsigned char *) s2;
-  unsigned char c1, c2;
-  int state;
-  int diff;
-
-  /* Symbol(s)    0       [1-9]   others  (padding)
-     Transition   (10) 0  (01) d  (00) x  (11) -   */
-  static const unsigned int next_state[] =
-  {
-      /* state    x    d    0    - */
-      /* S_N */  S_N, S_I, S_Z, S_N,
-      /* S_I */  S_N, S_I, S_I, S_I,
-      /* S_F */  S_N, S_F, S_F, S_F,
-      /* S_Z */  S_N, S_F, S_Z, S_Z
-  };
-
-  static const int result_type[] =
-  {
-      /* state   x/x  x/d  x/0  x/-  d/x  d/d  d/0  d/-
-                 0/x  0/d  0/0  0/-  -/x  -/d  -/0  -/- */
-
-      /* S_N */  CMP, CMP, CMP, CMP, CMP, LEN, CMP, CMP,
-                 CMP, CMP, CMP, CMP, CMP, CMP, CMP, CMP,
-      /* S_I */  CMP, -1,  -1,  CMP, +1,  LEN, LEN, CMP,
-                 +1,  LEN, LEN, CMP, CMP, CMP, CMP, CMP,
-      /* S_F */  CMP, CMP, CMP, CMP, CMP, LEN, CMP, CMP,
-                 CMP, CMP, CMP, CMP, CMP, CMP, CMP, CMP,
-      /* S_Z */  CMP, +1,  +1,  CMP, -1,  CMP, CMP, CMP,
-                 -1,  CMP, CMP, CMP
-  };
-
-  if (p1 == p2)
-    return 0;
-
-  c1 = *p1++;
-  c2 = *p2++;
-  /* Hint: '0' is a digit too.  */
-  state = S_N | ((c1 == '0') + (isdigit (c1) != 0));
-
-  while ((diff = c1 - c2) == 0 && c1 != '\0')
-    {
-      state = next_state[state];
-      c1 = *p1++;
-      c2 = *p2++;
-      state |= (c1 == '0') + (isdigit (c1) != 0);
-    }
-
-  state = result_type[state << 2 | (((c2 == '0') + (isdigit (c2) != 0)))];
-
-  switch (state)
-  {
-    case CMP:
-      return diff;
-
-    case LEN:
-      while (isdigit (*p1++))
-	if (!isdigit (*p2++))
-	  return 1;
-
-      return isdigit (*p2) ? -1 : diff;
-
-    default:
-      return state;
-  }
-}
-weak_alias (__strverscmp, strverscmp)
diff --git a/newlib/libc/sys/linux/sys/_types.h b/newlib/libc/sys/linux/sys/_types.h
deleted file mode 100644
index 15ccf1061..000000000
--- a/newlib/libc/sys/linux/sys/_types.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* ANSI C namespace clean utility typedefs */
-
-/* This file defines various typedefs needed by the system calls that support
-   the C library.  Basically, they're just the POSIX versions with an '_'
-   prepended.  This file lives in the `sys' directory so targets can provide
-   their own if desired (or they can put target dependant conditionals here).
-*/
-
-#ifndef	_SYS__TYPES_H
-#define _SYS__TYPES_H
-
-typedef long _off_t;
-__extension__ typedef long long _off64_t;
-
-#if defined(__INT_MAX__) && __INT_MAX__ == 2147483647
-typedef int _ssize_t;
-#else
-typedef long _ssize_t;
-#endif
-
-#define __need_wint_t
-#include <stddef.h>
-
-/* Conversion state information.  */
-typedef struct
-{
-  int __count;
-  union
-  {
-    wint_t __wch;
-    unsigned char __wchb[4];
-  } __value;		/* Value so far.  */
-} _mbstate_t;
-
-struct __flock_t_tmp;
-typedef struct
-{
-  int __a;
-  int __b;
-  struct
-  {
-    long int __c1;
-    int __c2;
-  } __c;
-  int __d;
-  struct __flock_t_tmp * __e;
-} _flock_t;
-
-#endif	/* _SYS__TYPES_H */
diff --git a/newlib/libc/sys/linux/sys/cdefs.h b/newlib/libc/sys/linux/sys/cdefs.h
deleted file mode 100644
index 459785bcb..000000000
--- a/newlib/libc/sys/linux/sys/cdefs.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/* Copyright (C) 1992,93,94,95,96,97,98,99,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef	_SYS_CDEFS_H
-#define	_SYS_CDEFS_H	1
-
-/* We are almost always included from features.h. */
-#ifndef _FEATURES_H
-# include <features.h>
-#endif
-
-/* The GNU libc does not support any K&R compilers or the traditional mode
-   of ISO C compilers anymore.  Check for some of the combinations not
-   anymore supported.  */
-#if defined __GNUC__ && !defined __STDC__
-# error "You need a ISO C conforming compiler to use the glibc headers"
-#endif
-
-#define __FBSDID(x) /* nothing */
-
-/* Some user header file might have defined this before.  */
-#undef	__P
-#undef	__PMT
-
-#ifdef __GNUC__
-
-/* GCC can always grok prototypes.  For C++ programs we add throw()
-   to help it optimize the function calls.  But this works only with
-   gcc 2.8.x and egcs.  */
-# if defined __cplusplus && __GNUC_PREREQ (2,8)
-#  define __THROW	throw ()
-# else
-#  define __THROW
-# endif
-# define __P(args)	args __THROW
-/* This macro will be used for functions which might take C++ callback
-   functions.  */
-# define __PMT(args)	args
-
-#else	/* Not GCC.  */
-
-# define __inline		/* No inline functions.  */
-
-# define __THROW
-# define __P(args)	args
-# define __PMT(args)	args
-
-# define __const	const
-# define __signed	signed
-# define __volatile	volatile
-
-#endif	/* GCC.  */
-
-/* For these things, GCC behaves the ANSI way normally,
-   and the non-ANSI way under -traditional.  */
-
-#define __CONCAT(x,y)	x ## y
-#define __STRING(x)	#x
-
-/* This is not a typedef so `const __ptr_t' does the right thing.  */
-#define __ptr_t void *
-#define __long_double_t  long double
-
-
-/* C++ needs to know that types and declarations are C, not C++.  */
-#ifdef	__cplusplus
-# define __BEGIN_DECLS	extern "C" {
-# define __END_DECLS	}
-#else
-# define __BEGIN_DECLS
-# define __END_DECLS
-#endif
-
-
-/* Support for bounded pointers.  */
-#ifndef __BOUNDED_POINTERS__
-# define __bounded	/* nothing */
-# define __unbounded	/* nothing */
-# define __ptrvalue	/* nothing */
-#endif
-
-
-/* Support for flexible arrays.  */
-#if __GNUC_PREREQ (2,97)
-/* GCC 2.97 supports C99 flexible array members.  */
-# define __flexarr	[]
-#else
-# ifdef __GNUC__
-#  define __flexarr	[0]
-# else
-#  if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
-#   define __flexarr	[]
-#  else
-/* Some other non-C99 compiler.  Approximate with [1].  */
-#   define __flexarr	[1]
-#  endif
-# endif
-#endif
-
-
-/* __asm__ ("xyz") is used throughout the headers to rename functions
-   at the assembly language level.  This is wrapped by the __REDIRECT
-   macro, in order to support compilers that can do this some other
-   way.  When compilers don't support asm-names at all, we have to do
-   preprocessor tricks instead (which don't have exactly the right
-   semantics, but it's the best we can do).
-
-   Example:
-   int __REDIRECT(setpgrp, (__pid_t pid, __pid_t pgrp), setpgid); */
-
-#if defined __GNUC__ && __GNUC__ >= 2
-
-# define __REDIRECT(name, proto, alias) name proto __asm__ (__ASMNAME (#alias))
-# define __ASMNAME(cname)  __ASMNAME2 (__USER_LABEL_PREFIX__, cname)
-# define __ASMNAME2(prefix, cname) __STRING (prefix) cname
-
-/*
-#elif __SOME_OTHER_COMPILER__
-
-# define __REDIRECT(name, proto, alias) name proto; \
-	_Pragma("let " #name " = " #alias)
-*/
-#endif
-
-/* GCC has various useful declarations that can be made with the
-   `__attribute__' syntax.  All of the ways we use this do fine if
-   they are omitted for compilers that don't understand it. */
-#if !defined __GNUC__ || __GNUC__ < 2
-# define __attribute__(xyz)	/* Ignore */
-#endif
-
-/* At some point during the gcc 2.96 development the `malloc' attribute
-   for functions was introduced.  We don't want to use it unconditionally
-   (although this would be possible) since it generates warnings.  */
-#if __GNUC_PREREQ (2,96)
-# define __attribute_malloc__ __attribute__ ((__malloc__))
-#else
-# define __attribute_malloc__ /* Ignore */
-#endif
-
-/* At some point during the gcc 2.96 development the `pure' attribute
-   for functions was introduced.  We don't want to use it unconditionally
-   (although this would be possible) since it generates warnings.  */
-#if __GNUC_PREREQ (2,96)
-# define __attribute_pure__ __attribute__ ((__pure__))
-#else
-# define __attribute_pure__ /* Ignore */
-#endif
-
-/* At some point during the gcc 3.1 development the `used' attribute
-   for functions was introduced.  We don't want to use it unconditionally
-   (although this would be possible) since it generates warnings.  */
-#if __GNUC_PREREQ (3,1)
-# define __attribute_used__ __attribute__ ((__used__))
-# define __attribute_noinline__ __attribute__ ((__noinline__))
-#else
-# define __attribute_used__ __attribute__ ((__unused__))
-# define __attribute_noinline__ /* Ignore */
-#endif
-
-/* At some point during the gcc 2.8 development the `format_arg' attribute
-   for functions was introduced.  We don't want to use it unconditionally
-   (although this would be possible) since it generates warnings.
-   If several `format_arg' attributes are given for the same function, in
-   gcc-3.0 and older, all but the last one are ignored.  In newer gccs,
-   all designated arguments are considered.  */
-#if __GNUC_PREREQ (2,8)
-# define __attribute_format_arg__(x) __attribute__ ((__format_arg__ (x)))
-#else
-# define __attribute_format_arg__(x) /* Ignore */
-#endif
-
-/* At some point during the gcc 2.97 development the `strfmon' format
-   attribute for functions was introduced.  We don't want to use it
-   unconditionally (although this would be possible) since it
-   generates warnings.  */
-#if __GNUC_PREREQ (2,97)
-# define __attribute_format_strfmon__(a,b) \
-  __attribute__ ((__format__ (__strfmon__, a, b)))
-#else
-# define __attribute_format_strfmon__(a,b) /* Ignore */
-#endif
-
-/* It is possible to compile containing GCC extensions even if GCC is
-   run in pedantic mode if the uses are carefully marked using the
-   `__extension__' keyword.  But this is not generally available before
-   version 2.8.  */
-#if !__GNUC_PREREQ (2,8)
-# define __extension__		/* Ignore */
-#endif
-
-/* __restrict is known in EGCS 1.2 and above. */
-#if !__GNUC_PREREQ (2,92)
-# define __restrict	/* Ignore */
-#endif
-
-/* ISO C99 also allows to declare arrays as non-overlapping.  The syntax is
-     array_name[restrict]
-   GCC 3.1 supports this.  */
-#if __GNUC_PREREQ (3,1) && !defined __GNUG__
-# define __restrict_arr	__restrict
-#else
-# ifdef __GNUC__
-#  define __restrict_arr	/* Not supported in old GCC.  */
-# else
-#  if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
-#   define __restrict_arr	restrict
-#  else
-/* Some other non-C99 compiler.  */
-#   define __restrict_arr	/* Not supported.  */
-#  endif
-# endif
-#endif
-
-#endif	 /* sys/cdefs.h */
diff --git a/newlib/libc/sys/linux/sys/dirent.h b/newlib/libc/sys/linux/sys/dirent.h
deleted file mode 100644
index 083158eb3..000000000
--- a/newlib/libc/sys/linux/sys/dirent.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* libc/sys/linux/sys/dirent.h - Directory entry as returned by readdir */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_DIRENT_H
-#define _SYS_DIRENT_H
-
-#include <sys/types.h>
-#include <linux/dirent.h>
-#define _LIBC 1
-#define  NOT_IN_libc 1
-#include <sys/lock.h>
-#undef _LIBC
-
-#define HAVE_NO_D_NAMLEN	/* no struct dirent->d_namlen */
-#define HAVE_DD_LOCK  		/* have locking mechanism */
-
-#define MAXNAMLEN 255		/* sizeof(struct dirent.d_name)-1 */
-
-
-typedef struct {
-    int dd_fd;		/* directory file */
-    int dd_loc;		/* position in buffer */
-    int dd_seek;
-    char *dd_buf;	/* buffer */
-    int dd_len;		/* buffer length */
-    int dd_size;	/* amount of data in buffer */
-    _LOCK_RECURSIVE_T dd_lock;
-} DIR;
-
-
-#define __dirfd(dir) (dir)->dd_fd
-
-/* --- redundant --- */
-
-DIR *opendir(const char *);
-struct dirent *readdir(DIR *);
-void rewinddir(DIR *);
-int closedir(DIR *);
-
-/* internal prototype */
-void _seekdir(DIR *dir,off_t offset);
-
-#ifndef _POSIX_SOURCE
-long telldir (DIR *);
-void seekdir (DIR *, off_t loc);
-
-int scandir (const char *__dir,
-             struct dirent ***__namelist,
-             int (*select) (const struct dirent *),
-             int (*compar) (const struct dirent **, const struct dirent **));
-
-int alphasort (const struct dirent **__a, const struct dirent **__b);
-#endif /* _POSIX_SOURCE */
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/dlfcn.h b/newlib/libc/sys/linux/sys/dlfcn.h
deleted file mode 100644
index e96b5c17a..000000000
--- a/newlib/libc/sys/linux/sys/dlfcn.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* System dependent definitions for run-time dynamic loading.
-   Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _DLFCN_H
-# error "Never use <bits/dlfcn.h> directly; include <dlfcn.h> instead."
-#endif
-
-/* The MODE argument to `dlopen' contains one of the following: */
-#define RTLD_LAZY	0x00001	/* Lazy function call binding.  */
-#define RTLD_NOW	0x00002	/* Immediate function call binding.  */
-#define	RTLD_BINDING_MASK   0x3	/* Mask of binding time value.  */
-#define RTLD_NOLOAD	0x00004	/* Do not load the object.  */
-
-/* If the following bit is set in the MODE argument to `dlopen',
-   the symbols of the loaded object and its dependencies are made
-   visible as if the object were linked directly into the program.  */
-#define RTLD_GLOBAL	0x00100
-
-/* Unix98 demands the following flag which is the inverse to RTLD_GLOBAL.
-   The implementation does this by default and so we can define the
-   value to zero.  */
-#define RTLD_LOCAL	0
-
-/* Do not delete object when closed.  */
-#define RTLD_NODELETE	0x01000
-
-#ifdef __USE_GNU
-/* To support profiling of shared objects it is a good idea to call
-   the function found using `dlsym' using the following macro since
-   these calls do not use the PLT.  But this would mean the dynamic
-   loader has no chance to find out when the function is called.  The
-   macro applies the necessary magic so that profiling is possible.
-   Rewrite
-	foo = (*fctp) (arg1, arg2);
-   into
-        foo = DL_CALL_FCT (fctp, (arg1, arg2));
-*/
-# define DL_CALL_FCT(fctp, args) \
-  (_dl_mcount_wrapper_check ((void *) (fctp)), (*(fctp)) args)
-
-__BEGIN_DECLS
-
-/* This function calls the profiling functions.  */
-extern void _dl_mcount_wrapper_check (void *__selfpc) __THROW;
-
-__END_DECLS
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/elfclass.h b/newlib/libc/sys/linux/sys/elfclass.h
deleted file mode 100644
index 180227d9e..000000000
--- a/newlib/libc/sys/linux/sys/elfclass.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* This file specifies the native word size of the machine, which indicates
-   the ELF file class used for executables and shared objects on this
-   machine.  */
-
-#ifndef _LINK_H
-# error "Never use <bits/elfclass.h> directly; include <link.h> instead."
-#endif
-
-#include <bits/wordsize.h>
-
-#define __ELF_NATIVE_CLASS __WORDSIZE
-
-/* The entries in the .hash table always have a size of 32 bits.  */
-typedef uint32_t Elf_Symndx;
diff --git a/newlib/libc/sys/linux/sys/errno.h b/newlib/libc/sys/linux/sys/errno.h
deleted file mode 100644
index 82c84c944..000000000
--- a/newlib/libc/sys/linux/sys/errno.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* libc/sys/linux/sys/errno.h - Errno variable and codes */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_ERRNO_H
-#define _SYS_ERRNO_H
-
-/* --- from newlin's sys/errno.h --- */
-
-#include <sys/reent.h>
-
-#ifndef _REENT_ONLY
-#define errno (*__errno())
-extern int *__errno _PARAMS ((void));
-#endif
-
-extern __IMPORT _CONST char * _CONST _sys_errlist[];
-extern __IMPORT int _sys_nerr;
-
-#define __errno_r(ptr) ((ptr)->_errno)
-
-/* --- end of slight redundancy (the use of struct _reent->_errno is
-       hard-coded in perror.c so why pretend anything else could work too ? */
-
-#define __set_errno(x) (errno = (x))
-
-#include <asm/errno.h>
-
-#define ENOTSUP EOPNOTSUPP
-#define EFTYPE          79              /* Inappropriate file type or format */
-#define EILSEQ          84
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/event.h b/newlib/libc/sys/linux/sys/event.h
deleted file mode 100644
index 159e23498..000000000
--- a/newlib/libc/sys/linux/sys/event.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*-
- * Copyright (c) 1999,2000,2001 Jonathan Lemon <jlemon@FreeBSD.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	$FreeBSD: src/sys/sys/event.h,v 1.19 2002/03/23 08:46:51 bde Exp $
- */
-
-#ifndef _SYS_EVENT_H_
-#define _SYS_EVENT_H_
-
-#define EVFILT_READ		(-1)
-#define EVFILT_WRITE		(-2)
-#define EVFILT_AIO		(-3)	/* attached to aio requests */
-#define EVFILT_VNODE		(-4)	/* attached to vnodes */
-#define EVFILT_PROC		(-5)	/* attached to struct proc */
-#define EVFILT_SIGNAL		(-6)	/* attached to struct proc */
-#define EVFILT_TIMER		(-7)	/* timers */
-#define EVFILT_NETDEV		(-8)	/* network devices */
-
-#define EVFILT_SYSCOUNT		8
-
-#define EV_SET(kevp, a, b, c, d, e, f) do {	\
-	(kevp)->ident = (a);			\
-	(kevp)->filter = (b);			\
-	(kevp)->flags = (c);			\
-	(kevp)->fflags = (d);			\
-	(kevp)->data = (e);			\
-	(kevp)->udata = (f);			\
-} while(0)
-
-struct kevent {
-	unsigned int *	ident;		/* identifier for this event */
-	short		filter;		/* filter for event */
-	u_short		flags;
-	u_int		fflags;
-        int * 	        data;
-	void		*udata;		/* opaque user data identifier */
-};
-
-/* actions */
-#define EV_ADD		0x0001		/* add event to kq (implies enable) */
-#define EV_DELETE	0x0002		/* delete event from kq */
-#define EV_ENABLE	0x0004		/* enable event */
-#define EV_DISABLE	0x0008		/* disable event (not reported) */
-
-/* flags */
-#define EV_ONESHOT	0x0010		/* only report one occurrence */
-#define EV_CLEAR	0x0020		/* clear event state after reporting */
-
-#define EV_SYSFLAGS	0xF000		/* reserved by system */
-#define EV_FLAG1	0x2000		/* filter-specific flag */
-
-/* returned values */
-#define EV_EOF		0x8000		/* EOF detected */
-#define EV_ERROR	0x4000		/* error, data contains errno */
-
-/*
- * data/hint flags for EVFILT_{READ|WRITE}, shared with userspace
- */
-#define NOTE_LOWAT	0x0001			/* low water mark */
-
-/*
- * data/hint flags for EVFILT_VNODE, shared with userspace
- */
-#define	NOTE_DELETE	0x0001			/* vnode was removed */
-#define	NOTE_WRITE	0x0002			/* data contents changed */
-#define	NOTE_EXTEND	0x0004			/* size increased */
-#define	NOTE_ATTRIB	0x0008			/* attributes changed */
-#define	NOTE_LINK	0x0010			/* link count changed */
-#define	NOTE_RENAME	0x0020			/* vnode was renamed */
-#define	NOTE_REVOKE	0x0040			/* vnode access was revoked */
-
-/*
- * data/hint flags for EVFILT_PROC, shared with userspace
- */
-#define	NOTE_EXIT	0x80000000		/* process exited */
-#define	NOTE_FORK	0x40000000		/* process forked */
-#define	NOTE_EXEC	0x20000000		/* process exec'd */
-#define	NOTE_PCTRLMASK	0xf0000000		/* mask for hint bits */
-#define	NOTE_PDATAMASK	0x000fffff		/* mask for pid */
-
-/* additional flags for EVFILT_PROC */
-#define	NOTE_TRACK	0x00000001		/* follow across forks */
-#define	NOTE_TRACKERR	0x00000002		/* could not track child */
-#define	NOTE_CHILD	0x00000004		/* am a child process */
-
-/*
- * data/hint flags for EVFILT_NETDEV, shared with userspace
- */
-#define NOTE_LINKUP	0x0001			/* link is up */
-#define NOTE_LINKDOWN	0x0002			/* link is down */
-#define NOTE_LINKINV	0x0004			/* link state is invalid */
-
-/*
- * This is currently visible to userland to work around broken
- * programs which pull in <sys/proc.h> or <sys/select.h>.
- */
-#include <sys/queue.h> 
-struct knote;
-
-#ifdef _KERNEL
-
-#ifdef MALLOC_DECLARE
-MALLOC_DECLARE(M_KQUEUE);
-#endif
-
-#define KNOTE(list, hint)	if ((list) != NULL) knote(list, hint)
-
-/*
- * Flag indicating hint is a signal.  Used by EVFILT_SIGNAL, and also
- * shared by EVFILT_PROC  (all knotes attached to p->p_klist)
- */
-#define NOTE_SIGNAL	0x08000000
-
-struct filterops {
-	int	f_isfd;		/* true if ident == filedescriptor */
-	int	(*f_attach)(struct knote *kn);
-	void	(*f_detach)(struct knote *kn);
-	int	(*f_event)(struct knote *kn, long hint);
-};
-
-struct knote {
-	SLIST_ENTRY(knote)	kn_link;	/* for fd */
-	SLIST_ENTRY(knote)	kn_selnext;	/* for struct selinfo */
-	TAILQ_ENTRY(knote)	kn_tqe;
-	struct			kqueue *kn_kq;	/* which queue we are on */
-	struct 			kevent kn_kevent;
-	int			kn_status;
-	int			kn_sfflags;	/* saved filter flags */
-	intptr_t		kn_sdata;	/* saved data field */
-	union {
-		struct		file *p_fp;	/* file data pointer */
-		struct		proc *p_proc;	/* proc pointer */
-	} kn_ptr;
-	struct			filterops *kn_fop;
-	caddr_t			kn_hook;
-#define KN_ACTIVE	0x01			/* event has been triggered */
-#define KN_QUEUED	0x02			/* event is on queue */
-#define KN_DISABLED	0x04			/* event is disabled */
-#define KN_DETACHED	0x08			/* knote is detached */
-
-#define kn_id		kn_kevent.ident
-#define kn_filter	kn_kevent.filter
-#define kn_flags	kn_kevent.flags
-#define kn_fflags	kn_kevent.fflags
-#define kn_data		kn_kevent.data
-#define kn_fp		kn_ptr.p_fp
-};
-
-struct thread;
-struct proc;
-
-extern void	knote(struct klist *list, long hint);
-extern void	knote_remove(struct thread *p, struct klist *list);
-extern void	knote_fdclose(struct thread *p, int fd);
-extern int 	kqueue_register(struct kqueue *kq,
-		    struct kevent *kev, struct thread *p);
-extern int	kqueue_add_filteropts(int filt, struct filterops *filtops);
-extern int	kqueue_del_filteropts(int filt);
-
-#else 	/* !_KERNEL */
-
-#include <sys/cdefs.h>
-struct timespec;
-
-__BEGIN_DECLS
-int     kqueue(void);
-int     kevent(int kq, const struct kevent *changelist, int nchanges,
-	    struct kevent *eventlist, int nevents,
-	    const struct timespec *timeout);
-__END_DECLS
-
-#endif /* !_KERNEL */
-
-#endif /* !_SYS_EVENT_H_ */
diff --git a/newlib/libc/sys/linux/sys/fcntl.h b/newlib/libc/sys/linux/sys/fcntl.h
deleted file mode 100644
index 78914fd8f..000000000
--- a/newlib/libc/sys/linux/sys/fcntl.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* libc/sys/linux/sys/fcntl.h - File access */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_FCNTL_H
-#define _SYS_FCNTL_H
-
-#include <sys/types.h>
-#include <linux/fcntl.h>
-
-/* --- redundant stuff below --- */
-
-#include <_ansi.h>
-
-extern int creat _PARAMS ((const char *, mode_t));
-extern int _open _PARAMS ((const char *, int, ...));
-
-#ifdef __KERNEL_PROTOTYPES
-extern int open(const char *pathname, int flags, mode_t mode);
-extern int fcntl(int fd, int cmd, long arg);
-#else
-extern int open _PARAMS ((const char *, int, ...));
-extern int fcntl _PARAMS ((int, int, ...));
-#endif
-
-extern int _fcntl _PARAMS ((int, int, ...));
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/features.h b/newlib/libc/sys/linux/sys/features.h
deleted file mode 100644
index 34cd0eb80..000000000
--- a/newlib/libc/sys/linux/sys/features.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _SYS_FEATURES_H
-#define _SYS_FEATURES_H
-
-#include <bits/posix_opt.h>
-
-/* We do not support asynchronous I/O.  */
-#undef _POSIX_ASYNCHRONOUS_IO
-#undef _POSIX_ASYNC_IO
-#undef _LFS_ASYNCHRONOUS_IO
-#undef _LFS64_ASYNCHRONOUS_IO
-
-/* POSIX message queues are supported.  */
-#undef	_POSIX_MESSAGE_PASSING
-#define	_POSIX_MESSAGE_PASSING 1
-
-#endif /* _SYS_FEATURES_H */
diff --git a/newlib/libc/sys/linux/sys/file.h b/newlib/libc/sys/linux/sys/file.h
deleted file mode 100644
index 875ee18c4..000000000
--- a/newlib/libc/sys/linux/sys/file.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* libc/sys/linux/sys/file.h - BSD compatibility */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_FILE_H
-#define _SYS_FILE_H
-
-#include <sys/fcntl.h>
-
-int flock(int fd,int operation);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/ioccom.h b/newlib/libc/sys/linux/sys/ioccom.h
deleted file mode 100644
index 4a063e973..000000000
--- a/newlib/libc/sys/linux/sys/ioccom.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*-
- * Copyright (c) 1982, 1986, 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ioccom.h	8.2 (Berkeley) 3/28/94
- * $FreeBSD: src/sys/sys/ioccom.h,v 1.14 2002/04/10 04:53:37 imp Exp $
- */
-
-#ifndef	_SYS_IOCCOM_H_
-#define	_SYS_IOCCOM_H_
-
-/*
- * Ioctl's have the command encoded in the lower word, and the size of
- * any in or out parameters in the upper word.  The high 3 bits of the
- * upper word are used to encode the in/out status of the parameter.
- */
-#define	IOCPARM_MASK	0x1fff		/* parameter length, at most 13 bits */
-#define	IOCPARM_LEN(x)	(((x) >> 16) & IOCPARM_MASK)
-#define	IOCBASECMD(x)	((x) & ~(IOCPARM_MASK << 16))
-#define	IOCGROUP(x)	(((x) >> 8) & 0xff)
-
-#define	IOCPARM_MAX	PAGE_SIZE		/* max size of ioctl, mult. of PAGE_SIZE */
-#define	IOC_VOID	0x20000000	/* no parameters */
-#define	IOC_OUT		0x40000000	/* copy out parameters */
-#define	IOC_IN		0x80000000	/* copy in parameters */
-#define	IOC_INOUT	(IOC_IN|IOC_OUT)
-#define	IOC_DIRMASK	0xe0000000	/* mask for IN/OUT/VOID */
-
-#define	_IOC(inout,group,num,len) \
-	((unsigned long)(inout | ((len & IOCPARM_MASK) << 16) | ((group) << 8) | (num)))
-#define	_IO(g,n)	_IOC(IOC_VOID,	(g), (n), 0)
-#define	_IOR(g,n,t)	_IOC(IOC_OUT,	(g), (n), sizeof(t))
-#define	_IOW(g,n,t)	_IOC(IOC_IN,	(g), (n), sizeof(t))
-/* this should be _IORW, but stdio got there first */
-#define	_IOWR(g,n,t)	_IOC(IOC_INOUT,	(g), (n), sizeof(t))
-
-#ifndef _KERNEL
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-int	ioctl(int, unsigned long, ...);
-__END_DECLS
-
-#endif
-
-#endif /* !_SYS_IOCCOM_H_ */
diff --git a/newlib/libc/sys/linux/sys/ioctl.h b/newlib/libc/sys/linux/sys/ioctl.h
deleted file mode 100644
index 12e0cd22d..000000000
--- a/newlib/libc/sys/linux/sys/ioctl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* libc/sys/linux/sys/ioctl.h - ioctl prototype */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_IOCTL_H
-#define _SYS_IOCTL_H
-
-int ioctl(int fd,int request,...);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/libc-tsd.h b/newlib/libc/sys/linux/sys/libc-tsd.h
deleted file mode 100644
index 80bd1d33d..000000000
--- a/newlib/libc/sys/linux/sys/libc-tsd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* libc-internal interface for thread-specific data.  Stub version.
-   Copyright (C) 1998, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _BITS_LIBC_TSD_H
-#define _BITS_LIBC_TSD_H 1
-
-/* This file defines the following macros for accessing a small fixed
-   set of thread-specific `void *' data used only internally by libc.
-
-   __libc_tsd_define(CLASS, KEY)	-- Define or declare a `void *' datum
-   					   for KEY.  CLASS can be `static' for
-					   keys used in only one source file,
-					   empty for global definitions, or
-					   `extern' for global declarations.
-   __libc_tsd_get(KEY)			-- Return the `void *' datum for KEY.
-   __libc_tsd_set(KEY, VALUE)		-- Set the datum for KEY to VALUE.
-
-   The set of available KEY's will usually be provided as an enum,
-   and contains (at least):
-		_LIBC_TSD_KEY_MALLOC
-		_LIBC_TSD_KEY_DL_ERROR
-		_LIBC_TSD_KEY_RPC_VARS
-   All uses must be the literal _LIBC_TSD_* name in the __libc_tsd_* macros.
-   Some implementations may not provide any enum at all and instead
-   using string pasting in the macros.  */
-
-/* This is the generic/stub implementation for wholly single-threaded
-   systems.  We don't define an enum for the possible key values, because
-   the KEYs translate directly into variables by macro magic.  */
-
-#define __libc_tsd_define(CLASS, KEY)	CLASS void *__libc_tsd_##KEY##_data;
-#define __libc_tsd_get(KEY)		(__libc_tsd_##KEY##_data)
-#define __libc_tsd_set(KEY, VALUE)	(__libc_tsd_##KEY##_data = (VALUE))
-
-
-#endif	/* bits/libc-tsd.h */
diff --git a/newlib/libc/sys/linux/sys/link.h b/newlib/libc/sys/linux/sys/link.h
deleted file mode 100644
index 470b4d3e5..000000000
--- a/newlib/libc/sys/linux/sys/link.h
+++ /dev/null
@@ -1,4 +0,0 @@
-struct link_map_machine
-  {
-    /* empty by default */
-  };
diff --git a/newlib/libc/sys/linux/sys/linux_time.h b/newlib/libc/sys/linux/sys/linux_time.h
deleted file mode 100644
index e71f70bba..000000000
--- a/newlib/libc/sys/linux/sys/linux_time.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _LINUX_TIME_H
-#define _LINUX_TIME_H
-
-#include <asm/param.h>
-#include <sys/types.h>
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-	time_t	tv_sec;		/* seconds */
-	long	tv_nsec;	/* nanoseconds */
-};
-#endif /* _STRUCT_TIMESPEC */
-
-/*
- * Change timeval to jiffies, trying to avoid the
- * most obvious overflows..
- *
- * And some not so obvious.
- *
- * Note that we don't want to return MAX_LONG, because
- * for various timeout reasons we often end up having
- * to wait "jiffies+1" in order to guarantee that we wait
- * at _least_ "jiffies" - so "jiffies+1" had better still
- * be positive.
- */
-#define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)
-
-static __inline__ unsigned long
-timespec_to_jiffies(struct timespec *value)
-{
-	unsigned long sec = value->tv_sec;
-	long nsec = value->tv_nsec;
-
-	if (sec >= (MAX_JIFFY_OFFSET / HZ))
-		return MAX_JIFFY_OFFSET;
-	nsec += 1000000000L / HZ - 1;
-	nsec /= 1000000000L / HZ;
-	return HZ * sec + nsec;
-}
-
-static __inline__ void
-jiffies_to_timespec(unsigned long jiffies, struct timespec *value)
-{
-	value->tv_nsec = (jiffies % HZ) * (1000000000L / HZ);
-	value->tv_sec = jiffies / HZ;
-}
- 
-#ifndef _STRUCT_TIMEVAL
-#define _STRUCT_TIMEVAL
-struct timeval {
-	time_t		tv_sec;		/* seconds */
-	suseconds_t	tv_usec;	/* microseconds */
-};
-#endif
-
-struct timezone {
-	int	tz_minuteswest;	/* minutes west of Greenwich */
-	int	tz_dsttime;	/* type of dst correction */
-};
-
-#define	ITIMER_REAL	0
-#define	ITIMER_VIRTUAL	1
-#define	ITIMER_PROF	2
-
-struct  itimerspec {
-        struct  timespec it_interval;    /* timer period */
-        struct  timespec it_value;       /* timer expiration */
-};
-
-struct	itimerval {
-	struct	timeval it_interval;	/* timer interval */
-	struct	timeval it_value;	/* current value */
-};
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/lock.h b/newlib/libc/sys/linux/sys/lock.h
deleted file mode 100644
index c70c56cb1..000000000
--- a/newlib/libc/sys/linux/sys/lock.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __SYS_LOCK_H__
-#define __SYS_LOCK_H__
-
-#include <machine/weakalias.h>
-#include <features.h>
-
-#define  _LIBC  1
-#define  NOT_IN_libc 1
-
-#include <bits/libc-lock.h>
-
-typedef __libc_lock_t _LOCK_T;
-typedef __libc_lock_recursive_t _LOCK_RECURSIVE_T;
-
-#define __LOCK_INIT(class,lock) \
-  __libc_lock_define_initialized(class, lock)
-#define __LOCK_RECURSIVE_INIT(class, lock) \
-  __libc_lock_define_initialized_recursive(class, lock)
-
-#define __lock_init(__lock) __libc_lock_init(__lock)
-#define __lock_init_recursive(__lock) __libc_lock_init_recursive(__lock)
-#define __lock_acquire(__lock) __libc_lock_lock(__lock)
-#define __lock_acquire_recursive(__lock) __libc_lock_lock_recursive(__lock)
-#define __lock_release(__lock) __libc_lock_unlock(__lock)
-#define __lock_release_recursive(__lock) __libc_lock_unlock_recursive(__lock)
-#define __lock_try_acquire(__lock) __libc_lock_trylock(__lock)
-#define __lock_try_acquire_recursive(__lock) \
-	__libc_lock_trylock_recursive(__lock)
-#define __lock_close(__lock) __libc_lock_fini(__lock)
-#define __lock_close_recursive(__lock) __libc_lock_fini_recursive(__lock)
-
-#endif /* __SYS_LOCK_H__ */
diff --git a/newlib/libc/sys/linux/sys/param.h b/newlib/libc/sys/linux/sys/param.h
deleted file mode 100644
index de0b4f61c..000000000
--- a/newlib/libc/sys/linux/sys/param.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * William Jolitz.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	from: @(#)param.h	5.8 (Berkeley) 6/28/91
- * $FreeBSD: src/sys/i386/include/param.h,v 1.62 2001/09/12 08:37:33 julian Exp $
- */
-
-/*
- * Round p (pointer or byte index) up to a correctly-aligned value
- * for all data types (int, long, ...).   The result is unsigned int
- * and must be cast to any desired pointer type.
- */
-#ifndef _ALIGNBYTES
-#define _ALIGNBYTES	(sizeof(int) - 1)
-#endif
-#ifndef _ALIGN
-#define _ALIGN(p)	(((unsigned)(p) + _ALIGNBYTES) & ~_ALIGNBYTES)
-#endif
-
-/* Macros for min/max.  */
-#define	MIN(a,b) (((a)<(b))?(a):(b))
-#define	MAX(a,b) (((a)>(b))?(a):(b))
-
-#include <machine/param.h>
-#include <sys/user.h>
diff --git a/newlib/libc/sys/linux/sys/resource.h b/newlib/libc/sys/linux/sys/resource.h
deleted file mode 100644
index f804731f9..000000000
--- a/newlib/libc/sys/linux/sys/resource.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* libc/sys/linux/sys/resource.h - Resource usage */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_RESOURCE_H
-#define _SYS_RESOURCE_H
-
-#include <sys/types.h>
-#include <bits/resource.h>
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/select.h b/newlib/libc/sys/linux/sys/select.h
deleted file mode 100644
index ddd2ac9d2..000000000
--- a/newlib/libc/sys/linux/sys/select.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SYS_SELECT_H
-#define _SYS_SELECT_H	1
-
-#include <sys/types.h>
-#include <bits/sigset.h>
-#include <time.h>
-
-extern int select (int __nfds, fd_set *__restrict __readfds,
-		   fd_set *__restrict __writefds,
-		   fd_set *__restrict __exceptfds,
-		   struct timeval *__restrict __timeout) __THROW;
-
-#endif /* sys/select.h */
diff --git a/newlib/libc/sys/linux/sys/signal.h b/newlib/libc/sys/linux/sys/signal.h
deleted file mode 100644
index cef7058cd..000000000
--- a/newlib/libc/sys/linux/sys/signal.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* libc/sys/linux/sys/signal.h - Signal handling */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_SIGNAL_H
-#define _SYS_SIGNAL_H
-#define _SIGNAL_H
-
-#include <sys/types.h>
-#include <bits/sigset.h>
-#include <bits/signum.h>
-
-/* we want RT signals so we must override the definition of sigset_t
-   and NSIG */
-
-#undef NSIG
-#define NSIG _NSIG
-#undef sigset_t
-#define sigset_t __sigset_t
-
-typedef void (*_sig_func_ptr) (int);
-typedef _sig_func_ptr __sighandler_t;
-
-#include <bits/siginfo.h>
-#include <bits/sigaction.h>
-#include <bits/sigstack.h>
-
-/* --- include/signal.h thinks it knows better :-( --- */
-
-#undef SIG_DFL
-#undef SIG_IGN
-#undef SIG_ERR
-
-/* --- redundant stuff below --- */
-
-#include <_ansi.h>
-
-int 	_EXFUN(kill, (int, int));
-_VOID 	_EXFUN(psignal, (int, const char *));
-int 	_EXFUN(sigaction, (int, const struct sigaction *, struct sigaction *));
-int 	_EXFUN(sigaddset, (sigset_t *, const int));
-int 	_EXFUN(sigdelset, (sigset_t *, const int));
-int 	_EXFUN(sigismember, (const sigset_t *, int));
-int 	_EXFUN(sigfillset, (sigset_t *));
-int 	_EXFUN(sigemptyset, (sigset_t *));
-int 	_EXFUN(sigpending, (sigset_t *));
-int 	_EXFUN(sigsuspend, (const sigset_t *));
-int 	_EXFUN(sigpause, (int));
-
-#ifndef _POSIX_SOURCE
-extern const char *const sys_siglist[];
-typedef __sighandler_t sig_t; /* BSDism */
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/socket.h b/newlib/libc/sys/linux/sys/socket.h
deleted file mode 100644
index b7a3dd1f1..000000000
--- a/newlib/libc/sys/linux/sys/socket.h
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * Copyright (c) 1982, 1985, 1986, 1988, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)socket.h	8.4 (Berkeley) 2/21/94
- * $FreeBSD: src/sys/sys/socket.h,v 1.60 2002/04/20 02:24:35 mike Exp $
- */
-
-#ifndef _SYS_SOCKET_H_
-#define	_SYS_SOCKET_H_
-
-#include <sys/types.h>
-#include <sys/_types.h>
-#include <netinet/in.h>
-#include <netdb.h>
-
-/* Needed by linuxthreads. */
-
-# define __SOCKADDR_ARG		struct sockaddr *__restrict
-# define __CONST_SOCKADDR_ARG	__const struct sockaddr *
-
-/*
- * Definitions related to sockets: types, address families, options.
- */
-
-/*
- * Data types.
- */
-#ifdef _BSD_SA_FAMILY_T_
-typedef	_BSD_SA_FAMILY_T_	sa_family_t;
-#undef _BSD_SA_FAMILY_T_
-#endif
-
-#ifdef	_BSD_SOCKLEN_T_
-typedef	_BSD_SOCKLEN_T_	socklen_t;
-#undef	_BSD_SOCKLEN_T_
-#endif
- 
-/*
- * Types
- */
-#define	SOCK_STREAM	1		/* stream socket */
-#define	SOCK_DGRAM	2		/* datagram socket */
-#define	SOCK_RAW	3		/* raw-protocol interface */
-#define	SOCK_RDM	4		/* reliably-delivered message */
-#define	SOCK_SEQPACKET	5		/* sequenced packet stream */
-
-/*
- * Option flags per-socket.
- */
-#define	SO_DEBUG	0x0001		/* turn on debugging info recording */
-#define	SO_ACCEPTCONN	0x0002		/* socket has had listen() */
-#define	SO_REUSEADDR	0x0004		/* allow local address reuse */
-#define	SO_KEEPALIVE	0x0008		/* keep connections alive */
-#define	SO_DONTROUTE	0x0010		/* just use interface addresses */
-#define	SO_BROADCAST	0x0020		/* permit sending of broadcast msgs */
-#define	SO_USELOOPBACK	0x0040		/* bypass hardware when possible */
-#define	SO_LINGER	0x0080		/* linger on close if data present */
-#define	SO_OOBINLINE	0x0100		/* leave received OOB data in line */
-#define	SO_REUSEPORT	0x0200		/* allow local address & port reuse */
-#define	SO_TIMESTAMP	0x0400		/* timestamp received dgram traffic */
-#define	SO_ACCEPTFILTER	0x1000		/* there is an accept filter */
-
-/*
- * Additional options, not kept in so_options.
- */
-#define SO_SNDBUF	0x1001		/* send buffer size */
-#define SO_RCVBUF	0x1002		/* receive buffer size */
-#define SO_SNDLOWAT	0x1003		/* send low-water mark */
-#define SO_RCVLOWAT	0x1004		/* receive low-water mark */
-#define SO_SNDTIMEO	0x1005		/* send timeout */
-#define SO_RCVTIMEO	0x1006		/* receive timeout */
-#define	SO_ERROR	0x1007		/* get error status and clear */
-#define	SO_TYPE		0x1008		/* get socket type */
-/*efine	SO_PRIVSTATE	0x1009		   get/deny privileged state */
-
-/*
- * Structure used for manipulating linger option.
- */
-struct linger {
-	int	l_onoff;		/* option on/off */
-	int	l_linger;		/* linger time */
-};
-
-struct accept_filter_arg {
-	char	af_name[16];
-	char	af_arg[256-16];
-};
-
-/*
- * Level number for (get/set)sockopt() to apply to socket itself.
- */
-#define	SOL_SOCKET	0xffff		/* options for socket level */
-
-/*
- * Address families.
- */
-#define	AF_UNSPEC	0		/* unspecified */
-#define	AF_LOCAL	1		/* local to host (pipes, portals) */
-#define	AF_UNIX		AF_LOCAL	/* backward compatibility */
-#define	AF_INET		2		/* internetwork: UDP, TCP, etc. */
-#define	AF_IMPLINK	3		/* arpanet imp addresses */
-#define	AF_PUP		4		/* pup protocols: e.g. BSP */
-#define	AF_CHAOS	5		/* mit CHAOS protocols */
-#define	AF_NS		6		/* XEROX NS protocols */
-#define	AF_ISO		7		/* ISO protocols */
-#define	AF_OSI		AF_ISO
-#define	AF_ECMA		8		/* European computer manufacturers */
-#define	AF_DATAKIT	9		/* datakit protocols */
-#define	AF_CCITT	10		/* CCITT protocols, X.25 etc */
-#define	AF_SNA		11		/* IBM SNA */
-#define AF_DECnet	12		/* DECnet */
-#define AF_DLI		13		/* DEC Direct data link interface */
-#define AF_LAT		14		/* LAT */
-#define	AF_HYLINK	15		/* NSC Hyperchannel */
-#define	AF_APPLETALK	16		/* Apple Talk */
-#define	AF_ROUTE	17		/* Internal Routing Protocol */
-#define	AF_LINK		18		/* Link layer interface */
-#define	pseudo_AF_XTP	19		/* eXpress Transfer Protocol (no AF) */
-#define	AF_COIP		20		/* connection-oriented IP, aka ST II */
-#define	AF_CNT		21		/* Computer Network Technology */
-#define pseudo_AF_RTIP	22		/* Help Identify RTIP packets */
-#define	AF_IPX		23		/* Novell Internet Protocol */
-#define	AF_SIP		24		/* Simple Internet Protocol */
-#define	pseudo_AF_PIP	25		/* Help Identify PIP packets */
-#define	AF_ISDN		26		/* Integrated Services Digital Network*/
-#define	AF_E164		AF_ISDN		/* CCITT E.164 recommendation */
-#define	pseudo_AF_KEY	27		/* Internal key-management function */
-#define	AF_INET6	28		/* IPv6 */
-#define	AF_NATM		29		/* native ATM access */
-#define	AF_ATM		30		/* ATM */
-#define pseudo_AF_HDRCMPLT 31		/* Used by BPF to not rewrite headers
-					 * in interface output routine
-					 */
-#define	AF_NETGRAPH	32		/* Netgraph sockets */
-#define	AF_SLOW		33		/* 802.3ad slow protocol */
-#define	AF_SCLUSTER	34		/* Sitara cluster protocol */
-#define	AF_MAX		35
-
-/*
- * Structure used by kernel to store most
- * addresses.
- */
-struct sockaddr {
-	sa_family_t	sa_family;	/* address family */
-	char		sa_data[14];	/* actually longer; address value */
-};
-#define	SOCK_MAXADDRLEN	255		/* longest possible addresses */
-
-/*
- * Structure used by kernel to pass protocol
- * information in raw sockets.
- */
-struct sockproto {
-	u_short	sp_family;		/* address family */
-	u_short	sp_protocol;		/* protocol */
-};
-
-/*
- * RFC 2553: protocol-independent placeholder for socket addresses
- */
-#define	_SS_MAXSIZE	128U
-#define	_SS_ALIGNSIZE	(sizeof(int64_t))
-#define	_SS_PAD1SIZE	(_SS_ALIGNSIZE - sizeof(unsigned char) - sizeof(sa_family_t))
-#define	_SS_PAD2SIZE	(_SS_MAXSIZE - sizeof(unsigned char) - sizeof(sa_family_t) - \
-				_SS_PAD1SIZE - _SS_ALIGNSIZE)
-
-struct sockaddr_storage {
-	unsigned char		ss_len;		/* address length */
-	sa_family_t	ss_family;	/* address family */
-	char		__ss_pad1[_SS_PAD1SIZE];
-	int64_t		__ss_align;	/* force desired structure storage alignment */
-	char		__ss_pad2[_SS_PAD2SIZE];
-};
-
-/*
- * Protocol families, same as address families for now.
- */
-#define	PF_UNSPEC	AF_UNSPEC
-#define	PF_LOCAL	AF_LOCAL
-#define	PF_UNIX		PF_LOCAL	/* backward compatibility */
-#define	PF_INET		AF_INET
-#define	PF_IMPLINK	AF_IMPLINK
-#define	PF_PUP		AF_PUP
-#define	PF_CHAOS	AF_CHAOS
-#define	PF_NS		AF_NS
-#define	PF_ISO		AF_ISO
-#define	PF_OSI		AF_ISO
-#define	PF_ECMA		AF_ECMA
-#define	PF_DATAKIT	AF_DATAKIT
-#define	PF_CCITT	AF_CCITT
-#define	PF_SNA		AF_SNA
-#define PF_DECnet	AF_DECnet
-#define PF_DLI		AF_DLI
-#define PF_LAT		AF_LAT
-#define	PF_HYLINK	AF_HYLINK
-#define	PF_APPLETALK	AF_APPLETALK
-#define	PF_ROUTE	AF_ROUTE
-#define	PF_LINK		AF_LINK
-#define	PF_XTP		pseudo_AF_XTP	/* really just proto family, no AF */
-#define	PF_COIP		AF_COIP
-#define	PF_CNT		AF_CNT
-#define	PF_SIP		AF_SIP
-#define	PF_IPX		AF_IPX		/* same format as AF_NS */
-#define PF_RTIP		pseudo_AF_RTIP	/* same format as AF_INET */
-#define PF_PIP		pseudo_AF_PIP
-#define	PF_ISDN		AF_ISDN
-#define	PF_KEY		pseudo_AF_KEY
-#define	PF_INET6	AF_INET6
-#define	PF_NATM		AF_NATM
-#define	PF_ATM		AF_ATM
-#define	PF_NETGRAPH	AF_NETGRAPH
-#define	PF_SLOW		AF_SLOW
-#define PF_SCLUSTER	AF_SCLUSTER
-
-#define	PF_MAX		AF_MAX
-
-/*
- * Definitions for network related sysctl, CTL_NET.
- *
- * Second level is protocol family.
- * Third level is protocol number.
- *
- * Further levels are defined by the individual families below.
- */
-#define NET_MAXID	AF_MAX
-
-#define CTL_NET_NAMES { \
-	{ 0, 0 }, \
-	{ "unix", CTLTYPE_NODE }, \
-	{ "inet", CTLTYPE_NODE }, \
-	{ "implink", CTLTYPE_NODE }, \
-	{ "pup", CTLTYPE_NODE }, \
-	{ "chaos", CTLTYPE_NODE }, \
-	{ "xerox_ns", CTLTYPE_NODE }, \
-	{ "iso", CTLTYPE_NODE }, \
-	{ "emca", CTLTYPE_NODE }, \
-	{ "datakit", CTLTYPE_NODE }, \
-	{ "ccitt", CTLTYPE_NODE }, \
-	{ "ibm_sna", CTLTYPE_NODE }, \
-	{ "decnet", CTLTYPE_NODE }, \
-	{ "dec_dli", CTLTYPE_NODE }, \
-	{ "lat", CTLTYPE_NODE }, \
-	{ "hylink", CTLTYPE_NODE }, \
-	{ "appletalk", CTLTYPE_NODE }, \
-	{ "route", CTLTYPE_NODE }, \
-	{ "link_layer", CTLTYPE_NODE }, \
-	{ "xtp", CTLTYPE_NODE }, \
-	{ "coip", CTLTYPE_NODE }, \
-	{ "cnt", CTLTYPE_NODE }, \
-	{ "rtip", CTLTYPE_NODE }, \
-	{ "ipx", CTLTYPE_NODE }, \
-	{ "sip", CTLTYPE_NODE }, \
-	{ "pip", CTLTYPE_NODE }, \
-	{ "isdn", CTLTYPE_NODE }, \
-	{ "key", CTLTYPE_NODE }, \
-	{ "inet6", CTLTYPE_NODE }, \
-	{ "natm", CTLTYPE_NODE }, \
-	{ "atm", CTLTYPE_NODE }, \
-	{ "hdrcomplete", CTLTYPE_NODE }, \
-	{ "netgraph", CTLTYPE_NODE }, \
-	{ "snp", CTLTYPE_NODE }, \
-	{ "scp", CTLTYPE_NODE }, \
-}
-
-/*
- * PF_ROUTE - Routing table
- *
- * Three additional levels are defined:
- *	Fourth: address family, 0 is wildcard
- *	Fifth: type of info, defined below
- *	Sixth: flag(s) to mask with for NET_RT_FLAGS
- */
-#define NET_RT_DUMP	1		/* dump; may limit to a.f. */
-#define NET_RT_FLAGS	2		/* by flags, e.g. RESOLVING */
-#define NET_RT_IFLIST	3		/* survey interface list */
-#define	NET_RT_MAXID	4
-
-#define CTL_NET_RT_NAMES { \
-	{ 0, 0 }, \
-	{ "dump", CTLTYPE_STRUCT }, \
-	{ "flags", CTLTYPE_STRUCT }, \
-	{ "iflist", CTLTYPE_STRUCT }, \
-}
-
-/*
- * Maximum queue length specifiable by listen.
- */
-#ifndef	SOMAXCONN
-#define	SOMAXCONN	128
-#endif
-
-/*
- * Message header for recvmsg and sendmsg calls.
- * Used value-result for recvmsg, value only for sendmsg.
- */
-struct msghdr {
-	void		*msg_name;		/* optional address */
-	socklen_t	 msg_namelen;		/* size of address */
-	struct iovec	*msg_iov;		/* scatter/gather array */
-	int		 msg_iovlen;		/* # elements in msg_iov */
-	void		*msg_control;		/* ancillary data, see below */
-	socklen_t	 msg_controllen;	/* ancillary data buffer len */
-	int		 msg_flags;		/* flags on received message */
-};
-
-#define	MSG_OOB		0x1		/* process out-of-band data */
-#define	MSG_PEEK	0x2		/* peek at incoming message */
-#define	MSG_DONTROUTE	0x4		/* send without using routing tables */
-#define	MSG_EOR		0x8		/* data completes record */
-#define	MSG_TRUNC	0x10		/* data discarded before delivery */
-#define	MSG_CTRUNC	0x20		/* control data lost before delivery */
-#define	MSG_WAITALL	0x40		/* wait for full request or error */
-#define	MSG_DONTWAIT	0x80		/* this message should be nonblocking */
-#define	MSG_EOF		0x100		/* data completes connection */
-#define MSG_COMPAT      0x8000		/* used in sendit() */
-
-/*
- * Header for ancillary data objects in msg_control buffer.
- * Used for additional information with/about a datagram
- * not expressible by flags.  The format is a sequence
- * of message elements headed by cmsghdr structures.
- */
-struct cmsghdr {
-	socklen_t	cmsg_len;		/* data byte count, including hdr */
-	int		cmsg_level;		/* originating protocol */
-	int		cmsg_type;		/* protocol-specific type */
-/* followed by	unsigned char  cmsg_data[]; */
-};
-
-/*
- * While we may have more groups than this, the cmsgcred struct must
- * be able to fit in an mbuf, and NGROUPS_MAX is too large to allow
- * this.
-*/
-#define CMGROUP_MAX 16
-
-/*
- * Credentials structure, used to verify the identity of a peer
- * process that has sent us a message. This is allocated by the
- * peer process but filled in by the kernel. This prevents the
- * peer from lying about its identity. (Note that cmcred_groups[0]
- * is the effective GID.)
- */
-struct cmsgcred {
-	pid_t	cmcred_pid;		/* PID of sending process */
-	uid_t	cmcred_uid;		/* real UID of sending process */
-	uid_t	cmcred_euid;		/* effective UID of sending process */
-	gid_t	cmcred_gid;		/* real GID of sending process */
-	short	cmcred_ngroups;		/* number or groups */
-	gid_t	cmcred_groups[CMGROUP_MAX];	/* groups */
-};
-
-/* given pointer to struct cmsghdr, return pointer to data */
-#define	CMSG_DATA(cmsg)		((unsigned char *)(cmsg) + \
-				 _ALIGN(sizeof(struct cmsghdr)))
-
-/* given pointer to struct cmsghdr, return pointer to next cmsghdr */
-#define	CMSG_NXTHDR(mhdr, cmsg)	\
-	(((caddr_t)(cmsg) + _ALIGN((cmsg)->cmsg_len) + \
-	  _ALIGN(sizeof(struct cmsghdr)) > \
-	    (caddr_t)(mhdr)->msg_control + (mhdr)->msg_controllen) ? \
-	    (struct cmsghdr *)NULL : \
-	    (struct cmsghdr *)((caddr_t)(cmsg) + _ALIGN((cmsg)->cmsg_len)))
-
-#define	CMSG_FIRSTHDR(mhdr)	((struct cmsghdr *)(mhdr)->msg_control)
-
-/* RFC 2292 additions */
-	
-#define	CMSG_SPACE(l)		(_ALIGN(sizeof(struct cmsghdr)) + _ALIGN(l))
-#define	CMSG_LEN(l)		(_ALIGN(sizeof(struct cmsghdr)) + (l))
-
-#ifdef _KERNEL
-#define	CMSG_ALIGN(n)	_ALIGN(n)
-#endif
-
-/* "Socket"-level control message types: */
-#define	SCM_RIGHTS	0x01		/* access rights (array of int) */
-#define	SCM_TIMESTAMP	0x02		/* timestamp (struct timeval) */
-#define	SCM_CREDS	0x03		/* process creds (struct cmsgcred) */
-
-/*
- * 4.3 compat sockaddr, move to compat file later
- */
-struct osockaddr {
-	u_short	sa_family;		/* address family */
-	char	sa_data[14];		/* up to 14 bytes of direct address */
-};
-
-/*
- * 4.3-compat message header (move to compat file later).
- */
-struct omsghdr {
-	caddr_t	msg_name;		/* optional address */
-	int	msg_namelen;		/* size of address */
-	struct	iovec *msg_iov;		/* scatter/gather array */
-	int	msg_iovlen;		/* # elements in msg_iov */
-	caddr_t	msg_accrights;		/* access rights sent/received */
-	int	msg_accrightslen;
-};
-
-/*
- * howto arguments for shutdown(2), specified by Posix.1g.
- */
-#define	SHUT_RD		0		/* shut down the reading side */
-#define	SHUT_WR		1		/* shut down the writing side */
-#define	SHUT_RDWR	2		/* shut down both sides */
-
-/*
- * sendfile(2) header/trailer struct
- */
-struct sf_hdtr {
-	struct iovec *headers;	/* pointer to an array of header struct iovec's */
-	int hdr_cnt;		/* number of header iovec's */
-	struct iovec *trailers;	/* pointer to an array of trailer struct iovec's */
-	int trl_cnt;		/* number of trailer iovec's */
-};
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-int	accept(int, struct sockaddr *, socklen_t *);
-int	bind(int, const struct sockaddr *, socklen_t);
-int	connect(int, const struct sockaddr *, socklen_t);
-int	getpeername(int, struct sockaddr *, socklen_t *);
-int	getsockname(int, struct sockaddr *, socklen_t *);
-int	getsockopt(int, int, int, void *, socklen_t *);
-int	listen(int, int);
-ssize_t	recv(int, void *, size_t, int);
-ssize_t	recvfrom(int, void *, size_t, int, struct sockaddr *, socklen_t *);
-ssize_t	recvmsg(int, struct msghdr *, int);
-ssize_t	send(int, const void *, size_t, int);
-ssize_t	sendto(int, const void *,
-	    size_t, int, const struct sockaddr *, socklen_t);
-ssize_t	sendmsg(int, const struct msghdr *, int);
-int	sendfile(int, int, off_t, size_t, struct sf_hdtr *, off_t *, int);
-int	setsockopt(int, int, int, const void *, socklen_t);
-int	shutdown(int, int);
-int	socket(int, int, int);
-int	socketpair(int, int, int, int *);
-__END_DECLS
-
-#endif /* !_SYS_SOCKET_H_ */
diff --git a/newlib/libc/sys/linux/sys/sockio.h b/newlib/libc/sys/linux/sys/sockio.h
deleted file mode 100644
index bdebfbebc..000000000
--- a/newlib/libc/sys/linux/sys/sockio.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*-
- * Copyright (c) 1982, 1986, 1990, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)sockio.h	8.1 (Berkeley) 3/28/94
- * $FreeBSD: src/sys/sys/sockio.h,v 1.25 2002/02/10 16:55:35 rwatson Exp $
- */
-
-#ifndef _SYS_SOCKIO_H_
-#define	_SYS_SOCKIO_H_
-
-#include <sys/ioccom.h>
-
-/* Socket ioctl's. */
-#define	SIOCSHIWAT	 _IOW('s',  0, int)		/* set high watermark */
-#define	SIOCGHIWAT	 _IOR('s',  1, int)		/* get high watermark */
-#define	SIOCSLOWAT	 _IOW('s',  2, int)		/* set low watermark */
-#define	SIOCGLOWAT	 _IOR('s',  3, int)		/* get low watermark */
-#define	SIOCATMARK	 _IOR('s',  7, int)		/* at oob mark? */
-#define	SIOCSPGRP	 _IOW('s',  8, int)		/* set process group */
-#define	SIOCGPGRP	 _IOR('s',  9, int)		/* get process group */
-
-#define	SIOCADDRT	 _IOW('r', 10, struct ortentry)	/* add route */
-#define	SIOCDELRT	 _IOW('r', 11, struct ortentry)	/* delete route */
-#define	SIOCGETVIFCNT	_IOWR('r', 15, struct sioc_vif_req)/* get vif pkt cnt */
-#define	SIOCGETSGCNT	_IOWR('r', 16, struct sioc_sg_req) /* get s,g pkt cnt */
-
-#define	SIOCSIFADDR	 _IOW('i', 12, struct ifreq)	/* set ifnet address */
-#define	OSIOCGIFADDR	_IOWR('i', 13, struct ifreq)	/* get ifnet address */
-#define	SIOCGIFADDR	_IOWR('i', 33, struct ifreq)	/* get ifnet address */
-#define	SIOCSIFDSTADDR	 _IOW('i', 14, struct ifreq)	/* set p-p address */
-#define	OSIOCGIFDSTADDR	_IOWR('i', 15, struct ifreq)	/* get p-p address */
-#define	SIOCGIFDSTADDR	_IOWR('i', 34, struct ifreq)	/* get p-p address */
-#define	SIOCSIFFLAGS	 _IOW('i', 16, struct ifreq)	/* set ifnet flags */
-#define	SIOCGIFFLAGS	_IOWR('i', 17, struct ifreq)	/* get ifnet flags */
-#define	OSIOCGIFBRDADDR	_IOWR('i', 18, struct ifreq)	/* get broadcast addr */
-#define	SIOCGIFBRDADDR	_IOWR('i', 35, struct ifreq)	/* get broadcast addr */
-#define	SIOCSIFBRDADDR	 _IOW('i', 19, struct ifreq)	/* set broadcast addr */
-#define	OSIOCGIFCONF	_IOWR('i', 20, struct ifconf)	/* get ifnet list */
-#define	SIOCGIFCONF	_IOWR('i', 36, struct ifconf)	/* get ifnet list */
-#define	OSIOCGIFNETMASK	_IOWR('i', 21, struct ifreq)	/* get net addr mask */
-#define	SIOCGIFNETMASK	_IOWR('i', 37, struct ifreq)	/* get net addr mask */
-#define	SIOCSIFNETMASK	 _IOW('i', 22, struct ifreq)	/* set net addr mask */
-#define	SIOCGIFMETRIC	_IOWR('i', 23, struct ifreq)	/* get IF metric */
-#define	SIOCSIFMETRIC	 _IOW('i', 24, struct ifreq)	/* set IF metric */
-#define	SIOCDIFADDR	 _IOW('i', 25, struct ifreq)	/* delete IF addr */
-#define	SIOCAIFADDR	 _IOW('i', 26, struct ifaliasreq)/* add/chg IF alias */
-
-#define	SIOCALIFADDR	 _IOW('i', 27, struct if_laddrreq) /* add IF addr */
-#define	SIOCGLIFADDR	_IOWR('i', 28, struct if_laddrreq) /* get IF addr */
-#define	SIOCDLIFADDR	 _IOW('i', 29, struct if_laddrreq) /* delete IF addr */
-#define	SIOCSIFCAP	 _IOW('i', 30, struct ifreq)	/* set IF features */
-#define	SIOCGIFCAP	_IOWR('i', 31, struct ifreq)	/* get IF features */
-#define	SIOCGIFINDEX	_IOWR('i', 32, struct ifreq)	/* get IF index */
-#define	SIOCGIFMAC	_IOWR('i', 38, struct ifreq)	/* get IF MAC label */
-#define	SIOCSIFMAC	 _IOW('i', 39, struct ifreq)	/* set IF MAC label */
-
-#define	SIOCADDMULTI	 _IOW('i', 49, struct ifreq)	/* add m'cast addr */
-#define	SIOCDELMULTI	 _IOW('i', 50, struct ifreq)	/* del m'cast addr */
-#define	SIOCGIFMTU	_IOWR('i', 51, struct ifreq)	/* get IF mtu */
-#define	SIOCSIFMTU	 _IOW('i', 52, struct ifreq)	/* set IF mtu */
-#define	SIOCGIFPHYS	_IOWR('i', 53, struct ifreq)	/* get IF wire */
-#define	SIOCSIFPHYS	 _IOW('i', 54, struct ifreq)	/* set IF wire */
-#define	SIOCSIFMEDIA	_IOWR('i', 55, struct ifreq)	/* set net media */
-#define	SIOCGIFMEDIA	_IOWR('i', 56, struct ifmediareq) /* get net media */
-
-#define	SIOCSIFGENERIC	 _IOW('i', 57, struct ifreq)	/* generic IF set op */
-#define	SIOCGIFGENERIC	_IOWR('i', 58, struct ifreq)	/* generic IF get op */
-
-#define	SIOCGIFSTATUS	_IOWR('i', 59, struct ifstat)	/* get IF status */
-#define	SIOCSIFLLADDR	 _IOW('i', 60, struct ifreq)	/* set linklevel addr */
-
-#define	SIOCSIFPHYADDR	 _IOW('i', 70, struct ifaliasreq) /* set gif addres */
-#define	SIOCGIFPSRCADDR	_IOWR('i', 71, struct ifreq)	/* get gif psrc addr */
-#define	SIOCGIFPDSTADDR	_IOWR('i', 72, struct ifreq)	/* get gif pdst addr */
-#define	SIOCDIFPHYADDR	 _IOW('i', 73, struct ifreq)	/* delete gif addrs */
-#define	SIOCSLIFPHYADDR	 _IOW('i', 74, struct if_laddrreq) /* set gif addrs */
-#define	SIOCGLIFPHYADDR	_IOWR('i', 75, struct if_laddrreq) /* get gif addrs */
-
-#define	SIOCGPRIVATE_0	_IOWR('i', 80, struct ifreq)	/* device private 0 */
-#define	SIOCGPRIVATE_1	_IOWR('i', 81, struct ifreq)	/* device private 1 */
-
-#define	SIOCIFCREATE	_IOWR('i', 122, struct ifreq)	/* create clone if */
-#define	SIOCIFDESTROY	 _IOW('i', 121, struct ifreq)	/* destroy clone if */
-#define	SIOCIFGCLONERS	_IOWR('i', 120, struct if_clonereq) /* get cloners */
-
-#endif /* !_SYS_SOCKIO_H_ */
diff --git a/newlib/libc/sys/linux/sys/stat.h b/newlib/libc/sys/linux/sys/stat.h
deleted file mode 100644
index 7bc06f7ae..000000000
--- a/newlib/libc/sys/linux/sys/stat.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* libc/sys/linux/sys/stat.h - Stat structure and macros */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_STAT_H
-#define _SYS_STAT_H
-
-#include <asm/stat.h>
-#define __KERNEL__
-#include <linux/stat.h>
-#undef __KERNEL__
-
-/* --- redundant stuff below --- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-int     _EXFUN(fstat,( int __fd, struct stat *__sbuf ));
-int     _EXFUN(mkdir,( const char *_path, mode_t __mode ));
-int     _EXFUN(mkfifo,( const char *__path, mode_t __mode ));
-int     _EXFUN(stat,( const char *__path, struct stat *__sbuf ));
-mode_t  _EXFUN(umask,( mode_t __mask ));
-
-#ifndef _POSIX_SOURCE
-int     _EXFUN(fstat64,( int __fd, struct stat *__sbuf ));
-int	_EXFUN(lstat,( const char *file_name, struct stat *buf));
-int	_EXFUN(lstat64,( const char *file_name, struct stat *buf));
-int     _EXFUN(stat64,( const char *__path, struct stat *__sbuf ));
-#endif /* _POSIX_SOURCE */
-
-#endif /* _SYS_STAT_H */
diff --git a/newlib/libc/sys/linux/sys/stdio.h b/newlib/libc/sys/linux/sys/stdio.h
deleted file mode 100644
index a99308161..000000000
--- a/newlib/libc/sys/linux/sys/stdio.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _NEWLIB_STDIO_H
-#define _NEWLIB_STDIO_H
-
-/* Internal locking macros, used to protect stdio functions.  In the
-   linux case, expand to flockfile, and funlockfile, both defined in
-   LinuxThreads. */
-#if !defined(__SINGLE_THREAD__)
-#  if !defined(_flockfile)
-#    define _flockfile(fp) flockfile(fp)
-#  endif
-#  if !defined(_funlockfile)
-#    define _funlockfile(fp) funlockfile(fp)
-#  endif
-#endif /* __SINGLE_THREAD__ */
-
-#define getline __getline
-#define getdelim __getdelim
-
-char *	_EXFUN(ctermid, (char *));
-
-#endif /* _NEWLIB_STDIO_H */
diff --git a/newlib/libc/sys/linux/sys/termios.h b/newlib/libc/sys/linux/sys/termios.h
deleted file mode 100644
index ae053b5e4..000000000
--- a/newlib/libc/sys/linux/sys/termios.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* libc/sys/linux/sys/termios.h - Terminal control definitions */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_TERMIOS_H
-#define _SYS_TERMIOS_H
-
-#include <linux/termios.h>
-#include <machine/termios.h>
-
-/* grr, this shouldn't have to be here */
-
-int tcgetattr(int fd,struct termios *termios_p);
-int tcsetattr(int fd,int optional_actions,const struct termios *termios_p);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/time.h b/newlib/libc/sys/linux/sys/time.h
deleted file mode 100644
index f2c656e5a..000000000
--- a/newlib/libc/sys/linux/sys/time.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* libc/sys/linux/sys/time.h - Time handling */
-
-/* Written 2000 by Werner Almesberger */
-
-/*
- * Copyright (c) 1982, 1986, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)time.h	8.5 (Berkeley) 5/4/95
- * $FreeBSD: src/sys/sys/time.h,v 1.56 2002/05/05 04:33:09 bde Exp $
- */
-
-#ifndef _SYS_TIME_H
-#define _SYS_TIME_H
-
-#include <sys/types.h>
-#include <sys/linux_time.h>
-
-/* Macros for converting between `struct timeval' and `struct timespec'.  */
-# define TIMEVAL_TO_TIMESPEC(tv, ts) {                                   \
-        (ts)->tv_sec = (tv)->tv_sec;                                    \
-        (ts)->tv_nsec = (tv)->tv_usec * 1000;                           \
-}
-# define TIMESPEC_TO_TIMEVAL(tv, ts) {                                   \
-        (tv)->tv_sec = (ts)->tv_sec;                                    \
-        (tv)->tv_usec = (ts)->tv_nsec / 1000;                           \
-}
-
-/* Convenience macros for operations on timevals.
-   NOTE: `timercmp' does not work for >= or <=.  */
-# define timerisset(tvp)	((tvp)->tv_sec || (tvp)->tv_usec)
-# define timerclear(tvp)	((tvp)->tv_sec = (tvp)->tv_usec = 0)
-# define timercmp(a, b, CMP) 						      \
-  (((a)->tv_sec == (b)->tv_sec) ? 					      \
-   ((a)->tv_usec CMP (b)->tv_usec) : 					      \
-   ((a)->tv_sec CMP (b)->tv_sec))
-# define timeradd(a, b, result)						      \
-  do {									      \
-    (result)->tv_sec = (a)->tv_sec + (b)->tv_sec;			      \
-    (result)->tv_usec = (a)->tv_usec + (b)->tv_usec;			      \
-    if ((result)->tv_usec >= 1000000)					      \
-      {									      \
-	++(result)->tv_sec;						      \
-	(result)->tv_usec -= 1000000;					      \
-      }									      \
-  } while (0)
-# define timersub(a, b, result)						      \
-  do {									      \
-    (result)->tv_sec = (a)->tv_sec - (b)->tv_sec;			      \
-    (result)->tv_usec = (a)->tv_usec - (b)->tv_usec;			      \
-    if ((result)->tv_usec < 0) {					      \
-      --(result)->tv_sec;						      \
-      (result)->tv_usec += 1000000;					      \
-    }									      \
-  } while (0)
-/* --- redundant stuff below --- */
-
-#include <_ansi.h>
-
-int _EXFUN(gettimeofday, (struct timeval *__p, struct timezone *__z));
-int _EXFUN(settimeofday, (const struct timeval *, const struct timezone *));
-int _EXFUN(utimes, (const char *__path, const struct timeval __tvp[2]));
-int _EXFUN(getitimer, (int __which, struct itimerval *__value));
-int _EXFUN(setitimer, (int __which, const struct itimerval *__value,
-                                        struct itimerval *__ovalue));
-#endif
diff --git a/newlib/libc/sys/linux/sys/types.h b/newlib/libc/sys/linux/sys/types.h
deleted file mode 100644
index ddd028424..000000000
--- a/newlib/libc/sys/linux/sys/types.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* libc/sys/linux/sys/types.h - The usual type zoo */
-
-/* Written 2000 by Werner Almesberger */
-
-/*-
- * Copyright (c) 1982, 1986, 1991, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- * (c) UNIX System Laboratories, Inc.
- * All or some portions of this file are derived from material licensed
- * to the University of California by American Telephone and Telegraph
- * Co. or Unix System Laboratories, Inc. and are reproduced herein with
- * the permission of UNIX System Laboratories, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)types.h	8.6 (Berkeley) 2/19/95
- * $FreeBSD: src/sys/sys/types.h,v 1.60 2002/04/10 15:58:13 mike Exp $
- */
-
-#ifndef _SYS_TYPES_H
-#define _SYS_TYPES_H
-
-/* Newlib has it's own time_t and clock_t definitions in 
- * libc/include/sys/types.h.  Repeat those here and
- * skip the kernel's definitions. */
-
-#include <features.h>
-#include <sys/config.h>
-#include <machine/types.h>
-#include <sys/_types.h>
-
-#if !defined(__time_t_defined) && !defined(_TIME_T)
-#define _TIME_T
-#define __time_t_defined
-typedef _TIME_T_ time_t;
-#endif
-
-#if !defined(__clock_t_defined) && !defined(_CLOCK_T)
-#define _CLOCK_T
-#define __clock_t_defined
-typedef _CLOCK_T_ clock_t;
-#endif
-
-#ifndef _SSIZE_T
-#define _SSIZE_T
-typedef _ssize_t ssize_t;
-#endif
-
-#ifndef __u_char_defined
-#ifdef __GNUC__
-__extension__ typedef long long quad_t;
-__extension__ typedef unsigned long long u_quad_t;
-#else
-typedef struct
-  {
-    long int __val[2];
-  } quad_t;
-typedef struct
-  {
-    unsigned long __val[2];
-  } u_quad_t;
-#endif
-typedef struct
-  {
-    int __val[2];
-  } fsid_t;
-#define __u_char_defined
-#endif
-
-typedef int clockid_t;
-
-#  define _SYS_TYPES_FD_SET
-#  define	NBBY	8		/* number of bits in a byte */
-/*
- * Select uses bit masks of file descriptors in longs.
- * These macros manipulate such bit fields (the filesystem macros use chars).
- * FD_SETSIZE may be defined by the user, but the default here
- * should be >= NOFILE (param.h).
- */
-#  ifndef	FD_SETSIZE
-#	define	FD_SETSIZE	64
-#  endif
-
-typedef	long	fd_mask;
-#  define	NFDBITS	(sizeof (fd_mask) * NBBY)	/* bits per mask */
-#  ifndef	howmany
-#	define	howmany(x,y)	(((x)+((y)-1))/(y))
-#  endif
-
-typedef struct {
-        unsigned long fds_bits [(1024/(8 * sizeof(unsigned long)))];
-} __fd_set;
-
-#  define	FD_SET(n, p)	((p)->fds_bits[(n)/NFDBITS] |= (1L << ((n) % NFDBITS)))
-#  define	FD_CLR(n, p)	((p)->fds_bits[(n)/NFDBITS] &= ~(1L << ((n) % NFDBITS)))
-#  define	FD_ISSET(n, p)	((p)->fds_bits[(n)/NFDBITS] & (1L << ((n) % NFDBITS)))
-#  define	FD_ZERO(p)	(__extension__ (void)({ \
-     size_t __i; \
-     char *__tmp = (char *)p; \
-     for (__i = 0; __i < sizeof (*(p)); ++__i) \
-       *__tmp++ = 0; \
-}))
-
-#include <linux/types.h>
-#include <bits/types.h>
-#define __mode_t_defined
-#define __gid_t_defined
-#define __uid_t_defined
-#define __pid_t_defined
-#define __ssize_t_defined
-#define __key_t_defined
-#define __off_t_defined
-#define __off64_t_defined
-
-typedef __ino_t ino_t;
-typedef __ino64_t ino64_t;
-typedef __uint32_t uintptr_t;
-typedef __int32_t intptr_t;
-typedef __off64_t off64_t;
-typedef __off_t off_t;
-typedef __loff_t loff_t;
-typedef __mode_t mode_t;
-typedef __pid_t pid_t;
-typedef __uid_t uid_t;
-typedef __gid_t gid_t;
-typedef __key_t key_t;
-typedef __suseconds_t suseconds_t;
-typedef __useconds_t useconds_t;
-typedef __daddr_t daddr_t;
-typedef __caddr_t caddr_t;
-typedef __dev_t dev_t;
-typedef __fd_set fd_set;
-typedef __nlink_t nlink_t;
-
-typedef __u_char u_char;
-typedef __u_short u_short;
-typedef __u_int u_int;
-typedef __u_long u_long;
-typedef __uint8_t u_int8_t;
-typedef __uint16_t u_int16_t;
-typedef __uint32_t u_int32_t;
-typedef __uint64_t u_int64_t;
-typedef __int16_t int16_t;
-typedef __int32_t int32_t;
-typedef __int64_t int64_t;
-
-#ifndef _UINT8_T_DECLARED
-typedef __uint8_t               uint8_t; 
-#define _UINT8_T_DECLARED
-#endif
-
-#ifndef _UINT16_T_DECLARED
-typedef __uint16_t              uint16_t; 
-#define _UINT16_T_DECLARED
-#endif
-
-#ifndef _UINT32_T_DECLARED
-typedef __uint32_t              uint32_t; 
-#define _UINT32_T_DECLARED
-#endif
-
-#ifndef _UINT64_T_DECLARED
-typedef __uint64_t              uint64_t; 
-#define _UINT64_T_DECLARED
-#endif
-
-#if !defined(_ANSI_SOURCE) && !defined(_POSIX_SOURCE)
-typedef	struct _physadr {
-	int	r[1];
-} *physadr;
-
-typedef	struct label_t {
-	int	val[6];
-} label_t;
-#endif
-
-typedef	unsigned int	vm_offset_t;
-typedef	__int64_t	vm_ooffset_t;
-typedef	unsigned int	vm_pindex_t;
-typedef	unsigned int	vm_size_t;
-
-typedef	__int32_t	register_t;
-typedef	__uint32_t	u_register_t;
-
-#ifdef _KERNEL
-typedef	int		intfptr_t;
-typedef	unsigned int	uintfptr_t;
-#endif
-
-/* Critical section value */
-typedef	register_t	critical_t;
-
-/* Interrupt mask (spl, xxx_imask, etc) */
-typedef	__uint32_t	intrmask_t;
-
-/* Interrupt handler function type. */
-typedef	void		ointhand2_t(int _device_id);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/unistd.h b/newlib/libc/sys/linux/sys/unistd.h
deleted file mode 100644
index dd3f0f7ea..000000000
--- a/newlib/libc/sys/linux/sys/unistd.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef _UNISTD_H
-#define _UNISTD_H
-
-#include <features.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/_types.h>
-#define __need_size_t
-#define __need_ptrdiff_t
-#include <stddef.h>
-
-extern char **environ;
-
-void	_EXFUN(_exit, (int __status ) _ATTRIBUTE ((noreturn)));
-
-int	_EXFUN(access,(const char *__path, int __amode ));
-unsigned  _EXFUN(alarm, (unsigned __secs ));
-int     _EXFUN(chdir, (const char *__path ));
-int     _EXFUN(chmod, (const char *__path, mode_t __mode ));
-int     _EXFUN(chown, (const char *__path, uid_t __owner, gid_t __group ));
-int     _EXFUN(chroot, (const char *__path ));
-int     _EXFUN(close, (int __fildes ));
-char    _EXFUN(*ctermid, (char *__s ));
-char    _EXFUN(*cuserid, (char *__s ));
-int     _EXFUN(dup, (int __fildes ));
-int     _EXFUN(dup2, (int __fildes, int __fildes2 ));
-#if defined(__CYGWIN__)
-void	_EXFUN(endusershell, (void));
-#endif
-int     _EXFUN(execl, (const char *__path, const char *, ... ));
-int     _EXFUN(execle, (const char *__path, const char *, ... ));
-int     _EXFUN(execlp, (const char *__file, const char *, ... ));
-int     _EXFUN(execv, (const char *__path, char * const __argv[] ));
-int     _EXFUN(execve, (const char *__path, char * const __argv[], char * const __envp[] ));
-int     _EXFUN(execvp, (const char *__file, char * const __argv[] ));
-int     _EXFUN(fchdir, (int __fildes));
-int     _EXFUN(fchmod, (int __fildes, mode_t __mode ));
-int     _EXFUN(fchown, (int __fildes, uid_t __owner, gid_t __group ));
-pid_t   _EXFUN(fork, (void ));
-long    _EXFUN(fpathconf, (int __fd, int __name ));
-int     _EXFUN(fsync, (int __fd));
-char    _EXFUN(*getcwd, (char *__buf, size_t __size ));
-int	_EXFUN(getdomainname ,(char *__name, size_t __len));
-gid_t   _EXFUN(getegid, (void ));
-uid_t   _EXFUN(geteuid, (void ));
-gid_t   _EXFUN(getgid, (void ));
-int     _EXFUN(getgroups, (int __gidsetsize, gid_t __grouplist[] ));
-char    _EXFUN(*getlogin, (void ));
-#if defined(_POSIX_THREAD_SAFE_FUNCTIONS)
-int _EXFUN(getlogin_r, (char *name, size_t namesize) );
-#endif
-char 	_EXFUN(*getpass, (__const char *__prompt));
-size_t  _EXFUN(getpagesize, (void));
-pid_t   _EXFUN(getpgid, (pid_t));
-pid_t   _EXFUN(getpgrp, (void ));
-pid_t   _EXFUN(getpid, (void ));
-pid_t   _EXFUN(getppid, (void ));
-uid_t   _EXFUN(getuid, (void ));
-char *	_EXFUN(getusershell, (void));
-char    _EXFUN(*getwd, (char *__buf ));
-int     _EXFUN(isatty, (int __fildes ));
-int     _EXFUN(lchown, (const char *__path, uid_t __owner, gid_t __group ));
-int     _EXFUN(link, (const char *__path1, const char *__path2 ));
-int	_EXFUN(nice, (int __nice_value ));
-off_t   _EXFUN(lseek, (int __fildes, off_t __offset, int __whence ));
-long    _EXFUN(pathconf, (const char *__path, int __name ));
-int     _EXFUN(pause, (void ));
-#ifdef __CYGWIN__
-int	_EXFUN(pthread_atfork, (void (*)(void), void (*)(void), void (*)(void)));
-#endif
-int     _EXFUN(pipe, (int __fildes[2] ));
-ssize_t _EXFUN(pread, (int __fd, void *__buf, size_t __nbytes, off_t __offset));
-ssize_t _EXFUN(pwrite, (int __fd, const void *__buf, size_t __nbytes, off_t __offset));
-_READ_WRITE_RETURN_TYPE _EXFUN(read, (int __fd, void *__buf, size_t __nbyte ));
-int     _EXFUN(rmdir, (const char *__path ));
-void *  _EXFUN(sbrk,  (ptrdiff_t __incr));
-int     _EXFUN(setegid, (gid_t __gid ));
-int     _EXFUN(seteuid, (uid_t __uid ));
-int     _EXFUN(setgid, (gid_t __gid ));
-int     _EXFUN(setpgid, (pid_t __pid, pid_t __pgid ));
-int     _EXFUN(setpgrp, (void ));
-pid_t   _EXFUN(setsid, (void ));
-int     _EXFUN(setuid, (uid_t __uid ));
-unsigned _EXFUN(sleep, (unsigned int __seconds ));
-void    _EXFUN(swab, (const void *, void *, ssize_t));
-long    _EXFUN(sysconf, (int __name ));
-pid_t   _EXFUN(tcgetpgrp, (int __fildes ));
-int     _EXFUN(tcsetpgrp, (int __fildes, pid_t __pgrp_id ));
-char *  _EXFUN(ttyname, (int __fildes ));
-int     _EXFUN(ttyname_r, (int __fildes, char *__buf, size_t __len));
-int     _EXFUN(unlink, (const char *__path ));
-int     _EXFUN(vhangup, (void ));
-_READ_WRITE_RETURN_TYPE _EXFUN(write, (int __fd, const void *__buf, size_t __nbyte ));
-
-extern char *optarg;			/* getopt(3) external variables */
-extern int optind, opterr, optopt;
-int	 getopt(int, char * const [], const char *);
-extern int optreset;			/* getopt(3) external variable */
-
-#ifndef        _POSIX_SOURCE
-pid_t   _EXFUN(vfork, (void ));
-
-extern char *suboptarg;			/* getsubopt(3) external variable */
-int	 getsubopt(char **, char * const *, char **);
-#endif /* _POSIX_SOURCE */
-
-/* Provide prototypes for most of the _<systemcall> names that are
-   provided in newlib for some compilers.  */
-int     _EXFUN(_close, (int __fildes ));
-pid_t   _EXFUN(_fork, (void ));
-pid_t   _EXFUN(_getpid, (void ));
-int     _EXFUN(_link, (const char *__path1, const char *__path2 ));
-off_t   _EXFUN(_lseek, (int __fildes, off_t __offset, int __whence ));
-_READ_WRITE_RETURN_TYPE _EXFUN(_read, (int __fd, void *__buf, size_t __nbyte ));
-void *  _EXFUN(_sbrk,  (size_t __incr));
-int     _EXFUN(_unlink, (const char *__path ));
-_READ_WRITE_RETURN_TYPE _EXFUN(_write, (int __fd, const void *__buf, size_t __nbyte ));
-int     _EXFUN(_execve, (const char *__path, char * const __argv[], char * const __envp[] ));
-
-#define	F_OK	0
-#define	R_OK	4
-#define	W_OK	2
-#define	X_OK	1
-
-# define	SEEK_SET	0
-# define	SEEK_CUR	1
-# define	SEEK_END	2
-
-#include <sys/features.h>
-
-#define STDIN_FILENO    0       /* standard input file descriptor */
-#define STDOUT_FILENO   1       /* standard output file descriptor */
-#define STDERR_FILENO   2       /* standard error file descriptor */
-
-#include <bits/environments.h>
-#include <bits/confname.h>
-
-# define        MAXPATHLEN      1024
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_UNISTD_H */
diff --git a/newlib/libc/sys/linux/sys/utime.h b/newlib/libc/sys/linux/sys/utime.h
deleted file mode 100644
index 7499cfe7e..000000000
--- a/newlib/libc/sys/linux/sys/utime.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef	_SYS_UTIME_H
-#define	_SYS_UTIME_H	1
-
-#include <sys/types.h>
-
-struct utimbuf
-  {
-    time_t actime;		/* Access time.  */
-    time_t modtime;		/* Modification time.  */
-  };
-
-int _EXFUN(utime, (const char *__file, const struct utimbuf *__times));
-
-#endif /* _SYS_UTIME_H */
diff --git a/newlib/libc/sys/linux/sys/utmp.h b/newlib/libc/sys/linux/sys/utmp.h
deleted file mode 100644
index a837483a9..000000000
--- a/newlib/libc/sys/linux/sys/utmp.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* libc/sys/linux/sys/utmp.h - utmp structure */
-
-/* Written 2000 by Werner Almesberger */
-
-
-/* Some things copied from glibc's /usr/include/bits/utmp.h */
-
-
-#ifndef _SYS_UTMP_H
-#define _SYS_UTMP_H
-
-
-#include <sys/types.h>
-
-
-#define UTMP_FILE "/var/run/utmp"
-
-#define UT_LINESIZE	32
-#define UT_NAMESIZE	32
-#define UT_HOSTSIZE	256
-
-struct utmp {
-    short int ut_type;
-    pid_t ut_pid;
-    char ut_line[UT_LINESIZE];
-    char ut_id[4];
-    char ut_user[UT_NAMESIZE];
-    char ut_host[UT_HOSTSIZE];
-    char __filler[52];
-};
-
-#define RUN_LVL		1
-#define BOOT_TIME	2
-#define NEW_TIME	3
-#define OLD_TIME	4
-
-#define INIT_PROCESS	5
-#define LOGIN_PROCESS	6
-#define USER_PROCESS	7
-#define DEAD_PROCESS	8
-
-
-/* --- redundant, from sys/cygwin/sys/utmp.h --- */
-
-struct utmp *_getutline (struct utmp *);
-struct utmp *getutent (void);
-struct utmp *getutid (struct utmp *);
-struct utmp *getutline (struct utmp *);
-void endutent (void);
-void pututline (struct utmp *);
-void setutent (void);
-void utmpname (const char *);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/utsname.h b/newlib/libc/sys/linux/sys/utsname.h
deleted file mode 100644
index 4de4c63be..000000000
--- a/newlib/libc/sys/linux/sys/utsname.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* libc/sys/linux/sys/utsname.h - System identification */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_UTSNAME_H
-#define _SYS_UTSNAME_H
-
-#define __UTSNAMELEN 65	/* synchronize with kernel */
-
-struct utsname {
-    char sysname[__UTSNAMELEN];
-    char nodename[__UTSNAMELEN];
-    char release[__UTSNAMELEN];
-    char version[__UTSNAMELEN];
-    char machine[__UTSNAMELEN];
-    char domainname[__UTSNAMELEN];
-};
-
-
-int uname(struct utsname *name);
-
-#endif
diff --git a/newlib/libc/sys/linux/sys/wait.h b/newlib/libc/sys/linux/sys/wait.h
deleted file mode 100644
index 4cc337783..000000000
--- a/newlib/libc/sys/linux/sys/wait.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* libc/sys/linux/sys/wait.h - Wait for children */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#ifndef _SYS_WAIT_H
-#define _SYS_WAIT_H
-
-#include <linux/wait.h>
-
-#define WIFEXITED(status)	(!WTERMSIG(status))
-#define WEXITSTATUS(status)	(((status) >> 8) & 0xff)
-#define WIFSIGNALED(status)	(!WIFSTOPPED(status) && !WIFEXITED(status))
-#define WTERMSIG(status)	((status ) & 0x7f)
-#define WIFSTOPPED(status)	(((status) & 0xff) == 0x7f)
-#define WSTOPSIG(status)	WEXITSTATUS(status)
-
-#ifndef _POSIX_SOURCE
-#define WCOREDUMP(status) 	((status) & 0x80)
-#endif
-
-/* --- redundant stuff below --- */
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-pid_t wait (int *);
-pid_t waitpid (pid_t, int *, int);
-
-pid_t _wait (int *);
-
-
-#ifndef _POSIX_SOURCE
-#include <sys/resource.h>
-
-pid_t wait3(int *status,int options,struct rusage *rusage);
-pid_t wait4(pid_t pid,int *status,int options,struct rusage *rusage);
-#endif
-
-#endif
diff --git a/newlib/libc/sys/linux/sysconf.c b/newlib/libc/sys/linux/sysconf.c
deleted file mode 100644
index 037ae54bf..000000000
--- a/newlib/libc/sys/linux/sysconf.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/* libc/sys/linux/sysconf.c - The sysconf function */
-
-/* Copyright 2002, Red Hat Inc. */
-
-
-#include <unistd.h>
-#include <limits.h>
-#include <time.h>
-#include <errno.h>
-#include <sys/types.h>
-
-long int 
-sysconf (int name)
-{
-  switch (name)
-    {
-    case _SC_AIO_LISTIO_MAX:
-#ifdef AIO_LISTIO_MAX
-      return AIO_LISTIO_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_AIO_MAX:
-#ifdef AIO_MAX
-      return AIO_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_AIO_PRIO_DELTA_MAX:
-#ifdef AIO_PRIO_DELTA_MAX
-      return AIO_PRIO_DELTA_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_ARG_MAX:
-#ifdef ARG_MAX
-      return ARG_MAX;
-#else
-      return -1;
-#endif
-    
-    case _SC_CHILD_MAX:
-#ifdef CHILD_MAX
-      return CHILD_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_CLK_TCK:
-      return CLK_TCK;
-
-    case _SC_DELAYTIMER_MAX:
-#ifdef DELAYTIMER_MAX
-      return DELAYTIMER_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_GETGR_R_SIZE_MAX:
-#ifdef _GETGR_R_SIZE_MAX
-      return _GETGR_R_SIZE_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_GETPW_R_SIZE_MAX:
-#ifdef _GETPW_R_SIZE_MAX
-      return _GETPW_R_SIZE_MAX;
-#else
-      return -1;
-#endif
-
-    case _SC_LOGIN_NAME_MAX:
-#ifdef LOGIN_NAME_MAX
-      return LOGIN_NAME_MAX;
-#else
-      return -1;
-#endif
-   
-    case _SC_MQ_OPEN_MAX:
-#ifdef MQ_OPEN_MAX
-      return MQ_OPEN_MAX;
-#else
-      return -1;
-#endif
-   
-    case _SC_MQ_PRIO_MAX:
-#ifdef MQ_PRIO_MAX
-      return MQ_PRIO_MAX;
-#else
-      return -1;
-#endif
-   
-    case _SC_NGROUPS_MAX:
-#ifdef NGROUPS_MAX
-      return NGROUPS_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_OPEN_MAX:
-#ifdef OPEN_MAX
-      return OPEN_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_PAGESIZE:
-#ifdef PAGESIZE
-      return PAGESIZE;
-#else
-      return -1;
-#endif
-  
-    case _SC_RTSIG_MAX:
-#ifdef RTSIG_MAX
-      return RTSIG_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_SEM_NSEMS_MAX:
-#ifdef SEM_NSEMS_MAX
-      return SEM_NSEMS_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_SEM_VALUE_MAX:
-#ifdef SEM_VALUE_MAX
-      return SEM_VALUE_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_SIGQUEUE_MAX:
-#ifdef SIGQUEUE_MAX
-      return SIGQUEUE_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_STREAM_MAX:
-#ifdef STREAM_MAX
-      return STREAM_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_DESTRUCTOR_ITERATIONS:
-#ifdef PTHREAD_DESTRUCTOR_ITERATIONS
-      return PTHREAD_DESTRUCTOR_ITERATIONS;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_KEYS_MAX:
-#ifdef PTHREAD_KEYS_MAX
-      return PTHREAD_KEYS_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_STACK_MIN:
-#ifdef PTHREAD_STACK_MIN
-      return PTHREAD_STACK_MIN;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_THREADS_MAX:
-#ifdef PTHREAD_THREADS_MAX
-      return PTHREAD_THREADS_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_TIMER_MAX:
-#ifdef TIMER_MAX
-      return TIMER_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_TTY_NAME_MAX:
-#ifdef TTY_NAME_MAX
-      return TTY_NAME_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_TZNAME_MAX:
-#ifdef TZNAME_MAX
-      return TZNAME_MAX;
-#else
-      return -1;
-#endif
-  
-    case _SC_ASYNCHRONOUS_IO:
-#ifdef _POSIX_ASYNCHRONOUS_IO
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_FSYNC:
-#ifdef _POSIX_FSYNC
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_JOB_CONTROL:
-#ifdef _POSIX_JOB_CONTROL
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_MAPPED_FILES:
-#ifdef _POSIX_MAPPED_FILES
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_MEMLOCK:
-#ifdef _POSIX_MEMLOCK
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_MEMLOCK_RANGE:
-#ifdef _POSIX_MEMLOCK_RANGE
-      return _POSIX_MEMLOCK_RANGE;
-#else
-      return -1;
-#endif
-  
-    case _SC_MEMORY_PROTECTION:
-#ifdef _POSIX_MEMORY_PROTECTION
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_MESSAGE_PASSING:
-#ifdef _POSIX_MESSAGE_PASSING
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_PRIORITIZED_IO:
-#ifdef _POSIX_PRIORITIZED_IO
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_PRIORITY_SCHEDULING:
-#ifdef _POSIX_PRIORITY_SCHEDULING
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_REALTIME_SIGNALS:
-#ifdef _POSIX_REALTIME_SIGNALS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_SAVED_IDS:
-#ifdef _POSIX_SAVED_IDS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_SEMAPHORES:
-#ifdef _POSIX_SEMAPHORES
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_SHARED_MEMORY_OBJECTS:
-#ifdef _POSIX_SHARED_MEMORY_OBJECTS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_SYNCHRONIZED_IO:
-#ifdef _POSIX_SYNCHRONIZED_IO
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_TIMERS:
-#ifdef _POSIX_TIMERS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREADS:
-#ifdef _POSIX_THREADS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_ATTR_STACKADDR:
-#ifdef _POSIX_THREAD_ATTR_STACKADDR
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_ATTR_STACKSIZE:
-#ifdef _POSIX_THREAD_ATTR_STACKSIZE
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_PRIORITY_SCHEDULING:
-#ifdef _POSIX_THREAD_PRIORITY_SCHEDULING
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_PRIO_INHERIT:
-#ifdef _POSIX_THREAD_PRIO_INHERIT
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_PRIO_PROTECT:
-#ifdef _POSIX_THREAD_PRIO_PROTECT
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_PROCESS_SHARED:
-#ifdef _POSIX_THREAD_PROCESS_SHARED
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_THREAD_SAFE_FUNCTIONS:
-#ifdef _POSIX_THREAD_SAFE_FUNCTIONS
-      return 1;
-#else
-      return -1;
-#endif
-  
-    case _SC_VERSION:
-#ifdef _POSIX_VERSION
-      return _POSIX_VERSION;
-#else
-      return -1;
-#endif
-
-    default:
-      errno = EINVAL;
-      return -1;
-    }
-
-  return -1; /* can't get here */
-}
diff --git a/newlib/libc/sys/linux/sysctl.c b/newlib/libc/sys/linux/sysctl.c
deleted file mode 100644
index 020d431be..000000000
--- a/newlib/libc/sys/linux/sysctl.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Read or write system information.  Linux version.
-   Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <sys/sysctl.h>
-
-#include <machine/syscall.h>
-
-static _syscall1(int,_sysctl,struct __sysctl_args *,args)
-
-int
-__sysctl (int *name, int nlen, void *oldval, size_t *oldlenp,
-	  void *newval, size_t newlen)
-{
-  struct __sysctl_args args =
-  {
-    name: name,
-    nlen: nlen,
-    oldval: oldval,
-    oldlenp: oldlenp,
-    newval: newval,
-    newlen: newlen
-  };
-
-  return _sysctl(&args);
-}
diff --git a/newlib/libc/sys/linux/systat.c b/newlib/libc/sys/linux/systat.c
deleted file mode 100644
index 9a57aa7e4..000000000
--- a/newlib/libc/sys/linux/systat.c
+++ /dev/null
@@ -1,10 +0,0 @@
-/* libc/sys/linux/systat.c - System calls related to overall system state */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <sys/utsname.h>
-#include <machine/syscall.h>
-
-
-_syscall1(int,uname,struct utsname *,name)
diff --git a/newlib/libc/sys/linux/system.c b/newlib/libc/sys/linux/system.c
deleted file mode 100644
index f8edfbf63..000000000
--- a/newlib/libc/sys/linux/system.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/* Copyright (C) 1991-1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <sys/types.h>
-#include <errno.h>
-#include <machine/weakalias.h>
-
-
-#ifndef	HAVE_GNU_LD
-#define	__environ	environ
-#endif
-
-#define	SHELL_PATH	"/bin/sh"	/* Path of the shell.  */
-#define	SHELL_NAME	"sh"		/* Name to give it.  */
-
-/* Execute LINE as a shell command, returning its status.  */
-int
-__libc_system (const char *line)
-{
-  int status, save;
-  pid_t pid;
-  struct sigaction sa, intr, quit;
-#ifndef WAITPID_CANNOT_BLOCK_SIGCHLD
-  sigset_t block, omask;
-#endif
-
-  if (line == NULL)
-    /* Check that we have a command processor available.  It might
-       not be available after a chroot(), for example.  */
-    return __libc_system ("exit 0") == 0;
-
-  sa.sa_handler = SIG_IGN;
-  sa.sa_flags = 0;
-  sigemptyset (&sa.sa_mask);
-
-  if (sigaction (SIGINT, &sa, &intr) < 0)
-    return -1;
-  if (sigaction (SIGQUIT, &sa, &quit) < 0)
-    {
-      save = errno;
-      (void) sigaction (SIGINT, &intr, (struct sigaction *) NULL);
-      errno = save;
-      return -1;
-    }
-
-#ifndef WAITPID_CANNOT_BLOCK_SIGCHLD
-
-/* SCO 3.2v4 has a bug where `waitpid' will never return if SIGCHLD is
-   blocked.  This makes it impossible for `system' to be implemented in
-   compliance with POSIX.2-1992.  They have acknowledged that this is a bug
-   but I have not seen nor heard of any forthcoming fix.  */
-
-  sigemptyset (&block);
-  sigaddset (&block, SIGCHLD);
-  save = errno;
-  if (sigprocmask (SIG_BLOCK, &block, &omask) < 0)
-    {
-      if (errno == ENOSYS)
-	errno = save;
-      else
-	{
-	  save = errno;
-	  (void) sigaction (SIGINT, &intr, (struct sigaction *) NULL);
-	  (void) sigaction (SIGQUIT, &quit, (struct sigaction *) NULL);
-	  errno = save;
-	  return -1;
-	}
-    }
-# define UNBLOCK sigprocmask (SIG_SETMASK, &omask, (sigset_t *) NULL)
-#else
-# define UNBLOCK 0
-#endif
-
-  pid = fork ();
-  if (pid == (pid_t) 0)
-    {
-      /* Child side.  */
-      const char *new_argv[4];
-      new_argv[0] = SHELL_NAME;
-      new_argv[1] = "-c";
-      new_argv[2] = line;
-      new_argv[3] = NULL;
-
-      /* Restore the signals.  */
-      (void) sigaction (SIGINT, &intr, (struct sigaction *) NULL);
-      (void) sigaction (SIGQUIT, &quit, (struct sigaction *) NULL);
-      (void) UNBLOCK;
-
-      /* Exec the shell.  */
-      (void) execve (SHELL_PATH, (char *const *) new_argv, __environ);
-      _exit (127);
-    }
-  else if (pid < (pid_t) 0)
-    /* The fork failed.  */
-    status = -1;
-  else
-    /* Parent side.  */
-    {
-#ifdef	NO_WAITPID
-      pid_t child;
-      do
-	{
-	  child = wait (&status);
-	  if (child <= -1 && errno != EINTR)
-	    {
-	      status = -1;
-	      break;
-	    }
-	  /* Note that pid cannot be <= -1 and therefore the loop continues
-	     when wait returned with EINTR.  */
-	}
-      while (child != pid);
-#else
-      int n;
-
-      do
-	n = waitpid (pid, &status, 0);
-      while (n == -1 && errno == EINTR);
-
-      if (n != pid)
-	status = -1;
-#endif
-    }
-
-  save = errno;
-  if ((sigaction (SIGINT, &intr, (struct sigaction *) NULL) |
-       sigaction (SIGQUIT, &quit, (struct sigaction *) NULL) |
-       UNBLOCK) != 0)
-    {
-      if (errno == ENOSYS)
-	errno = save;
-      else
-	return -1;
-    }
-
-  return status;
-}
-weak_alias (__libc_system, system)
diff --git a/newlib/libc/sys/linux/tcdrain.c b/newlib/libc/sys/linux/tcdrain.c
deleted file mode 100644
index 364fc035f..000000000
--- a/newlib/libc/sys/linux/tcdrain.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/* tcdrain - wait for transmission of output */
-
-#include <termios.h>
-#include <sys/ioctl.h>
-#include <machine/weakalias.h>
-
-int
-__libc_tcdrain (int fd)
-{ 
-  return ioctl (fd, TCSBRK, 1);
-}
-weak_alias (__libc_tcdrain, tcdrain)
-
diff --git a/newlib/libc/sys/linux/tcsendbrk.c b/newlib/libc/sys/linux/tcsendbrk.c
deleted file mode 100644
index a35a4d8ce..000000000
--- a/newlib/libc/sys/linux/tcsendbrk.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Copyright (C) 1992, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Modified for newlib, May 27, 2002, by Jeff Johnston */
-
-#include <errno.h>
-#include <stddef.h>
-#include <signal.h>
-#include <termios.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-
-/* Send zero bits on FD.  */
-int
-tcsendbreak (fd, duration)
-     int fd;
-     int duration;
-{
-  /* The break lasts 0.25 to 0.5 seconds if DURATION is zero,
-     and an implementation-defined period if DURATION is nonzero.
-     We define a positive DURATION to be number of milliseconds to break.  */
-  if (duration <= 0)
-    return ioctl (fd, TCSBRK, 0);
-
-  /* ioctl can't send a break of any other duration for us.
-     This could be changed to use trickery (e.g. lower speed and
-     send a '\0') to send the break, but for now just return an error.  */
-  errno = (EINVAL);
-  return -1;
-}
diff --git a/newlib/libc/sys/linux/termios.c b/newlib/libc/sys/linux/termios.c
deleted file mode 100644
index ac155201d..000000000
--- a/newlib/libc/sys/linux/termios.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* libc/sys/linux/termios.c - Terminal control */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/termios.h>
-#include <sys/ioctl.h>
-
-
-int 
-tcgetattr(int fd,struct termios *termios_p)
-{
-  return ioctl(fd,TCGETS,termios_p);
-}
-
-
-int 
-tcsetattr(int fd,int optional_actions,const struct termios *termios_p)
-{
-  int cmd;
-
-  switch (optional_actions) {
-    case TCSANOW:
-      cmd = TCSETS;
-    break;
-    case TCSADRAIN:
-      cmd = TCSETSW;
-    break;
-    case TCSAFLUSH:
-      cmd = TCSETSF;
-    break;
-    default:
-      errno = EINVAL;
-      return -1;
-    }
-  return ioctl(fd,cmd,termios_p);
-}
-
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL >= 4
-pid_t 
-tcgetpgrp(int fd)
-{
-  int p;
-    
-  if (ioctl(fd,TIOCGPGRP,&p) < 0)
-    return (pid_t)-1;
-  return (pid_t)p;
-}
-
-
-int 
-tcsetpgrp(int fd, pid_t pid)
-{
-  int p = (int)pid;
-  return ioctl(fd,TIOCSPGRP,&p);
-}
-#endif /* !_ELIX_LEVEL || _ELIX_LEVEL >= 4 */
-
-int
-tcflow (int fd, int action)
-{
-  return ioctl (fd, TCXONC, action);
-}
-
-int
-tcflush (int fd, int queue_selector)
-{
-  return ioctl (fd, TCFLSH, queue_selector);
-}
-
diff --git a/newlib/libc/sys/linux/thread-m.h b/newlib/libc/sys/linux/thread-m.h
deleted file mode 100644
index 2cdacab19..000000000
--- a/newlib/libc/sys/linux/thread-m.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* Basic platform-independent macro definitions for mutexes and
-   thread-specific data.
-   Copyright (C) 1996, 1997, 1998, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* $Id$
-   One out of _LIBC, USE_PTHREADS, USE_THR or USE_SPROC should be
-   defined, otherwise the token NO_THREADS and dummy implementations
-   of the macros will be defined.  */
-
-#ifndef _THREAD_M_H
-#define _THREAD_M_H
-
-#undef thread_atfork_static
-
-#if defined(_LIBC) /* The GNU C library, a special case of Posix threads */
-
-#include <bits/libc-lock.h>
-
-#ifdef PTHREAD_MUTEX_INITIALIZER
-
-typedef pthread_t thread_id;
-
-/* mutex */
-typedef pthread_mutex_t	mutex_t;
-
-#define MUTEX_INITIALIZER	PTHREAD_MUTEX_INITIALIZER
-
-/* Even if not linking with libpthread, ensure usability of mutex as
-   an `in use' flag, see also the NO_THREADS case below.  Assume
-   pthread_mutex_t is at least one int wide.  */
-
-#define mutex_init(m)		\
-   (__pthread_mutex_init != NULL \
-    ? __pthread_mutex_init (m, NULL) : (*(int *)(m) = 0))
-#define mutex_lock(m)		\
-   (__pthread_mutex_lock != NULL \
-    ? __pthread_mutex_lock (m) : ((*(int *)(m) = 1), 0))
-#define mutex_trylock(m)	\
-   (__pthread_mutex_trylock != NULL \
-    ? __pthread_mutex_trylock (m) : (*(int *)(m) ? 1 : ((*(int *)(m) = 1), 0)))
-#define mutex_unlock(m)		\
-   (__pthread_mutex_unlock != NULL \
-    ? __pthread_mutex_unlock (m) : (*(int*)(m) = 0))
-
-#define thread_atfork(prepare, parent, child) \
-   (__pthread_atfork != NULL ? __pthread_atfork(prepare, parent, child) : 0)
-
-#elif defined(MUTEX_INITIALIZER)
-/* Assume hurd, with cthreads */
-
-/* Cthreads `mutex_t' is a pointer to a mutex, and malloc wants just the
-   mutex itself.  */
-#undef mutex_t
-#define mutex_t struct mutex
-
-#undef mutex_init
-#define mutex_init(m) (__mutex_init(m), 0)
-
-#undef mutex_lock
-#define mutex_lock(m) (__mutex_lock(m), 0)
-
-#undef mutex_unlock
-#define mutex_unlock(m) (__mutex_unlock(m), 0)
-
-#define mutex_trylock(m) (!__mutex_trylock(m))
-
-#define thread_atfork(prepare, parent, child) do {} while(0)
-#define thread_atfork_static(prepare, parent, child) \
- text_set_element(_hurd_fork_prepare_hook, prepare); \
- text_set_element(_hurd_fork_parent_hook, parent); \
- text_set_element(_hurd_fork_child_hook, child);
-
-/* No we're *not* using pthreads.  */
-#define __pthread_initialize ((void (*)(void))0)
-
-#else
-
-#define NO_THREADS
-
-#endif /* MUTEX_INITIALIZER && PTHREAD_MUTEX_INITIALIZER */
-
-#ifndef NO_THREADS
-
-/* thread specific data for glibc */
-
-#include <libc-tsd.h>
-
-typedef int tsd_key_t[1];	/* no key data structure, libc magic does it */
-__libc_tsd_define (, MALLOC)	/* declaration/common definition */
-#define tsd_key_create(key, destr)	((void) (key))
-#define tsd_setspecific(key, data)	__libc_tsd_set (MALLOC, (data))
-#define tsd_getspecific(key, vptr)	((vptr) = __libc_tsd_get (MALLOC))
-
-#endif
-
-#elif defined(USE_PTHREADS) /* Posix threads */
-
-#include <pthread.h>
-
-typedef pthread_t thread_id;
-
-/* mutex */
-typedef pthread_mutex_t mutex_t;
-
-#define MUTEX_INITIALIZER          PTHREAD_MUTEX_INITIALIZER
-#define mutex_init(m)              pthread_mutex_init(m, NULL)
-#define mutex_lock(m)              pthread_mutex_lock(m)
-#define mutex_trylock(m)           pthread_mutex_trylock(m)
-#define mutex_unlock(m)            pthread_mutex_unlock(m)
-
-/* thread specific data */
-#if defined(__sgi) || defined(USE_TSD_DATA_HACK)
-
-/* Hack for thread-specific data, e.g. on Irix 6.x.  We can't use
-   pthread_setspecific because that function calls malloc() itself.
-   The hack only works when pthread_t can be converted to an integral
-   type. */
-
-typedef void *tsd_key_t[256];
-#define tsd_key_create(key, destr) do { \
-  int i; \
-  for(i=0; i<256; i++) (*key)[i] = 0; \
-} while(0)
-#define tsd_setspecific(key, data) \
- (key[(unsigned)pthread_self() % 256] = (data))
-#define tsd_getspecific(key, vptr) \
- (vptr = key[(unsigned)pthread_self() % 256])
-
-#else
-
-typedef pthread_key_t tsd_key_t;
-
-#define tsd_key_create(key, destr) pthread_key_create(key, destr)
-#define tsd_setspecific(key, data) pthread_setspecific(key, data)
-#define tsd_getspecific(key, vptr) (vptr = pthread_getspecific(key))
-
-#endif
-
-/* at fork */
-#define thread_atfork(prepare, parent, child) \
-                                   pthread_atfork(prepare, parent, child)
-
-#elif USE_THR /* Solaris threads */
-
-#include <thread.h>
-
-typedef thread_t thread_id;
-
-#define MUTEX_INITIALIZER          { 0 }
-#define mutex_init(m)              mutex_init(m, USYNC_THREAD, NULL)
-
-/*
- * Hack for thread-specific data on Solaris.  We can't use thr_setspecific
- * because that function calls malloc() itself.
- */
-typedef void *tsd_key_t[256];
-#define tsd_key_create(key, destr) do { \
-  int i; \
-  for(i=0; i<256; i++) (*key)[i] = 0; \
-} while(0)
-#define tsd_setspecific(key, data) (key[(unsigned)thr_self() % 256] = (data))
-#define tsd_getspecific(key, vptr) (vptr = key[(unsigned)thr_self() % 256])
-
-#define thread_atfork(prepare, parent, child) do {} while(0)
-
-#elif USE_SPROC /* SGI sproc() threads */
-
-#include <sys/wait.h>
-#include <sys/types.h>
-#include <sys/prctl.h>
-#include <abi_mutex.h>
-
-typedef int thread_id;
-
-typedef abilock_t mutex_t;
-
-#define MUTEX_INITIALIZER          { 0 }
-#define mutex_init(m)              init_lock(m)
-#define mutex_lock(m)              (spin_lock(m), 0)
-#define mutex_trylock(m)           acquire_lock(m)
-#define mutex_unlock(m)            release_lock(m)
-
-typedef int tsd_key_t;
-int tsd_key_next;
-#define tsd_key_create(key, destr) ((*key) = tsd_key_next++)
-#define tsd_setspecific(key, data) (((void **)(&PRDA->usr_prda))[key] = data)
-#define tsd_getspecific(key, vptr) (vptr = ((void **)(&PRDA->usr_prda))[key])
-
-#define thread_atfork(prepare, parent, child) do {} while(0)
-
-#else /* no _LIBC or USE_... are defined */
-
-#define NO_THREADS
-
-#endif /* defined(_LIBC) */
-
-#ifdef NO_THREADS /* No threads, provide dummy macros */
-
-typedef int thread_id;
-
-/* The mutex functions used to do absolutely nothing, i.e. lock,
-   trylock and unlock would always just return 0.  However, even
-   without any concurrently active threads, a mutex can be used
-   legitimately as an `in use' flag.  To make the code that is
-   protected by a mutex async-signal safe, these macros would have to
-   be based on atomic test-and-set operations, for example. */
-typedef int mutex_t;
-
-#define MUTEX_INITIALIZER          0
-#define mutex_init(m)              (*(m) = 0)
-#define mutex_lock(m)              ((*(m) = 1), 0)
-#define mutex_trylock(m)           (*(m) ? 1 : ((*(m) = 1), 0))
-#define mutex_unlock(m)            (*(m) = 0)
-
-typedef void *tsd_key_t;
-#define tsd_key_create(key, destr) do {} while(0)
-#define tsd_setspecific(key, data) ((key) = (data))
-#define tsd_getspecific(key, vptr) (vptr = (key))
-
-#define thread_atfork(prepare, parent, child) do {} while(0)
-
-#endif /* defined(NO_THREADS) */
-
-#endif /* !defined(_THREAD_M_H) */
diff --git a/newlib/libc/sys/linux/time.c b/newlib/libc/sys/linux/time.c
deleted file mode 100644
index a7313505e..000000000
--- a/newlib/libc/sys/linux/time.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* libc/sys/linux/time.c - Time-related system calls */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/timex.h>
-#include <linux/times.h>
-#include <machine/syscall.h>
-
-#define __NR___adjtimex __NR_adjtimex
-
-_syscall1(int,__adjtimex,struct timex *,tx)
-_syscall1(time_t,time,time_t *,t)
-_syscall1(clock_t,times,struct tms *,buf)
-_syscall2(int,getitimer,int,type,struct itimerval *,old)
-_syscall3(int,setitimer,int,type,const struct itimerval *,new,struct itimerval *,old)
-_syscall2(int,gettimeofday,struct timeval *,tv,struct timezone *,tz)
-_syscall2(int,settimeofday,const struct timeval *,tv,const struct timezone *,tz)
-_syscall2(int,nanosleep,const struct timespec *,req,struct timespec *,rem)
-
-weak_alias(__libc_gettimeofday,__gettimeofday);
-weak_alias(__adjtimex,adjtimex);
-weak_alias(__adjtimex,ntp_adjtime);
diff --git a/newlib/libc/sys/linux/ttyname_r.c b/newlib/libc/sys/linux/ttyname_r.c
deleted file mode 100644
index efad76a0e..000000000
--- a/newlib/libc/sys/linux/ttyname_r.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/* Copyright (C) 1991,92,93,1995-1999,2000,2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <errno.h>
-#include <limits.h>
-#include <stddef.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <machine/weakalias.h>
-
-static int getttyname_r (char *buf, size_t buflen,
-			 dev_t mydev, ino64_t myino, int save,
-			 int *dostat);
-
-extern struct dirent64 *__readdir64 (DIR *);
-
-static int
-getttyname_r (char *buf, size_t buflen, dev_t mydev, ino64_t myino,
-	      int save, int *dostat)
-{
-  struct stat64 st;
-  DIR *dirstream;
-  struct dirent64 *d;
-  size_t devlen = strlen (buf);
-
-  dirstream = opendir (buf);
-  if (dirstream == NULL)
-    {
-      *dostat = -1;
-      return errno;
-    }
-
-  while ((d = __readdir64 (dirstream)) != NULL)
-    {
-      if ((d->d_ino == myino || *dostat)
-          && strcmp (d->d_name, "stdin")
-	  && strcmp (d->d_name, "stdout")
-	  && strcmp (d->d_name, "stderr"))
-        {
-	  size_t needed = strlen (d->d_name) + 1;
-
-	  if (needed > buflen)
-	    {
-	      *dostat = -1;
-	      (void) closedir (dirstream);
-	      __set_errno (ERANGE);
-	      return ERANGE;
-	    }
-
-	  strncpy (buf + devlen, d->d_name, needed);
-
-	  if (stat64 (buf, &st) == 0
-#ifdef _STATBUF_ST_RDEV
-	      && S_ISCHR (st.st_mode) && st.st_rdev == mydev
-#else
-	      && d->d_ino == myino && st.st_dev == mydev
-#endif
-	     )
-	    {
-	      (void) closedir (dirstream);
-	      __set_errno (save);
-	      return 0;
-	    }
-        }
-    }
-
-  (void) closedir (dirstream);
-  __set_errno (save);
-  /* It is not clear what to return in this case.  `isatty' says FD
-     refers to a TTY but no entry in /dev has this inode.  */
-  return ENOTTY;
-}
-
-/* Store at most BUFLEN character of the pathname of the terminal FD is
-   open on in BUF.  Return 0 on success,  otherwise an error number.  */
-int
-__ttyname_r (int fd, char *buf, size_t buflen)
-{
-  char procname[30];
-  struct stat64 st, st1;
-  int dostat = 0;
-  int save = errno;
-  int ret;
-
-  /* Test for the absolute minimal size.  This makes life easier inside
-     the loop.  */
-  if (!buf)
-    {
-      __set_errno (EINVAL);
-      return EINVAL;
-    }
-
-  if (buflen < sizeof ("/dev/pts/"))
-    {
-      __set_errno (ERANGE);
-      return ERANGE;
-    }
-
-  if (!isatty (fd))
-    {
-      __set_errno (ENOTTY);
-      return ENOTTY;
-    }
-
-  /* We try using the /proc filesystem.  */
-  sprintf (procname, "/proc/self/fd/%d", fd);
-
-  ret = readlink (procname, buf, buflen - 1);
-  if (ret != -1 && buf[0] != '[')
-    {
-      buf[ret] = '\0';
-      return 0;
-    }
-  if (ret == -1 && errno == ENAMETOOLONG)
-    {
-      __set_errno (ERANGE);
-      return ERANGE;
-    }
-
-  if (fstat64 (fd, &st) < 0)
-    return errno;
-
-  /* Prepare the result buffer.  */
-  memcpy (buf, "/dev/pts/", sizeof ("/dev/pts/"));
-  buflen -= sizeof ("/dev/pts/") - 1;
-
-  if (stat64 (buf, &st1) == 0 && S_ISDIR (st1.st_mode))
-    {
-#ifdef _STATBUF_ST_RDEV
-      ret = getttyname_r (buf, buflen, st.st_rdev, st.st_ino, save,
-			  &dostat);
-#else
-      ret = getttyname_r (buf, buflen, st.st_dev, st.st_ino, save,
-			  &dostat);
-#endif
-    }
-  else
-    {
-      __set_errno (save);
-      ret = ENOENT;
-    }
-
-  if (ret && dostat != -1)
-    {
-      buf[sizeof ("/dev/") - 1] = '\0';
-      buflen += sizeof ("pts/") - 1;
-#ifdef _STATBUF_ST_RDEV
-      ret = getttyname_r (buf, buflen, st.st_rdev, st.st_ino, save,
-			  &dostat);
-#else
-      ret = getttyname_r (buf, buflen, st.st_dev, st.st_ino, save,
-			  &dostat);
-#endif
-    }
-
-  if (ret && dostat != -1)
-    {
-      buf[sizeof ("/dev/") - 1] = '\0';
-      dostat = 1;
-#ifdef _STATBUF_ST_RDEV
-      ret = getttyname_r (buf, buflen, st.st_rdev, st.st_ino,
-			  save, &dostat);
-#else
-      ret = getttyname_r (buf, buflen, st.st_dev, st.st_ino,
-			  save, &dostat);
-#endif
-    }
-
-  return ret;
-}
-
-weak_alias (__ttyname_r, ttyname_r)
diff --git a/newlib/libc/sys/linux/usleep.c b/newlib/libc/sys/linux/usleep.c
deleted file mode 100644
index fab6911f2..000000000
--- a/newlib/libc/sys/linux/usleep.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* libc/sys/linux/usleep.c - usleep function */
-
-/* Written 2002 by Jeff Johnston */
-
-
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <linux/times.h>
-
-int usleep(__useconds_t useconds)
-{
-    struct timespec ts;
-
-    ts.tv_sec = (long int)useconds / 1000000;
-    ts.tv_nsec = ((long int)useconds % 1000000) * 1000;
-    if (!nanosleep(&ts,&ts)) return 0;
-    if (errno == EINTR) return ts.tv_sec;
-    return -1;
-}
diff --git a/newlib/libc/sys/linux/utimes.c b/newlib/libc/sys/linux/utimes.c
deleted file mode 100644
index 0bee55152..000000000
--- a/newlib/libc/sys/linux/utimes.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Copyright (C) 1995, 1997, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include <utime.h>
-#include <sys/time.h>
-#include <errno.h>
-#include <stddef.h>
-#include <machine/weakalias.h>
-
-/* Change the access time of FILE to TVP[0] and
-   the modification time of FILE to TVP[1].  */
-int
-__utimes (const char *file, const struct timeval tvp[2])
-{
-  struct utimbuf buf, *times;
-
-  if (tvp)
-    {
-      times = &buf;
-      times->actime = tvp[0].tv_sec + tvp[0].tv_usec / 1000000;
-      times->modtime = tvp[1].tv_sec + tvp[1].tv_usec / 1000000;
-    }
-  else
-    times = NULL;
-
-  return utime (file, times);
-}
-
-weak_alias (__utimes, utimes)
diff --git a/newlib/libc/sys/linux/vallocr.c b/newlib/libc/sys/linux/vallocr.c
deleted file mode 100644
index 8de7ffc21..000000000
--- a/newlib/libc/sys/linux/vallocr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdlib.h>
-
-void * 
-_valloc_r (struct _reent *ptr, size_t bytes)
-{
-  return valloc (bytes);
-}
diff --git a/newlib/libc/sys/linux/versionsort.c b/newlib/libc/sys/linux/versionsort.c
deleted file mode 100644
index 13cbdccfc..000000000
--- a/newlib/libc/sys/linux/versionsort.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <dirent.h>
-#include <string.h>
-
-extern int __strverscmp (char *, char *);
-
-int
-versionsort (const void *a, const void *b)
-{
-  return __strverscmp ((*(const struct dirent **)a)->d_name,
-                       (*(const struct dirent **)b)->d_name);
-}
diff --git a/newlib/libc/sys/linux/versionsort64.c b/newlib/libc/sys/linux/versionsort64.c
deleted file mode 100644
index 45147b00d..000000000
--- a/newlib/libc/sys/linux/versionsort64.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <dirent.h>
-#include <string.h>
-
-extern int __strverscmp (char *, char *);
-
-int
-versionsort64 (const void *a, const void *b)
-{
-  return __strverscmp ((*(const struct dirent64 **)a)->d_name,
-                       (*(const struct dirent64 **)b)->d_name);
-}
diff --git a/newlib/libc/sys/linux/wait.c b/newlib/libc/sys/linux/wait.c
deleted file mode 100644
index 31d1cc765..000000000
--- a/newlib/libc/sys/linux/wait.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* libc/sys/linux/wait.c - Wait function wrappers */
-
-/* Written 2000 by Werner Almesberger */
-
-
-#include <sys/wait.h>
-#include <machine/syscall.h>
-
-
-_syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
-_syscall4(pid_t,wait4,pid_t,pid,int *,status,int,options,struct rusage *,rusage)
-
-
-pid_t __libc_wait3(int *status,int options,struct rusage *rusage)
-{
-    return __libc_wait4(-1,status,options,rusage);
-}
-weak_alias(__libc_wait3,wait3)
-
-pid_t __libc_wait(int *status)
-{
-    return __libc_waitpid(-1,status,0);
-}
-
-weak_alias(__libc_waitpid,__libc___waitpid);
-weak_alias(__libc_wait,__wait);
-weak_alias(__libc_wait,wait);
diff --git a/newlib/libc/sys/m88kbug/Makefile.am b/newlib/libc/sys/m88kbug/Makefile.am
deleted file mode 100644
index 9e6c84db5..000000000
--- a/newlib/libc/sys/m88kbug/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/m88kbug/Makefile.in b/newlib/libc/sys/m88kbug/Makefile.in
deleted file mode 100644
index 255ad8b7c..000000000
--- a/newlib/libc/sys/m88kbug/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/m88kbug/aclocal.m4 b/newlib/libc/sys/m88kbug/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/m88kbug/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/m88kbug/configure b/newlib/libc/sys/m88kbug/configure
deleted file mode 100755
index eff045ade..000000000
--- a/newlib/libc/sys/m88kbug/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=syscalls.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/m88kbug/configure.in b/newlib/libc/sys/m88kbug/configure.in
deleted file mode 100644
index 33f201000..000000000
--- a/newlib/libc/sys/m88kbug/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/m88kbug configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(syscalls.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/m88kbug/crt0.c b/newlib/libc/sys/m88kbug/crt0.c
deleted file mode 100644
index d0d95e418..000000000
--- a/newlib/libc/sys/m88kbug/crt0.c
+++ /dev/null
@@ -1,19 +0,0 @@
-extern int main(int argc, char **argv);
-
-extern char edata;
-extern char end;
-extern char stack;
-
-_start()
-{
-  char *p;
-
-  p = &edata + 1;
-  while (p < &end) 
-    {
-      *p++ = 0;
-    }
-
-  main(0, 0);
-  _exit();
-}
diff --git a/newlib/libc/sys/m88kbug/sys/systraps.h b/newlib/libc/sys/m88kbug/sys/systraps.h
deleted file mode 100644
index f3ee1a3c2..000000000
--- a/newlib/libc/sys/m88kbug/sys/systraps.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* trap numbers for mvme187bug */
-
-#define INCHR	0x0000
-#define OUTCHR	0x0020
-#define RETURN	0x0063
-
-#define SYSTRAP(x) {asm("or r9,r0,%0" : : "i" (x) : "r9"); asm("tb0 0,r0,496");}
-
-/* end of systraps.h */
diff --git a/newlib/libc/sys/m88kbug/syscalls.c b/newlib/libc/sys/m88kbug/syscalls.c
deleted file mode 100644
index 32f42a925..000000000
--- a/newlib/libc/sys/m88kbug/syscalls.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Operating system  and traps for mvme187bug, the motorolola BUG
-   monitor for m88k */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/times.h>
-#include <errno.h>
-
-#include "sys/systraps.h"
-
-static void writechar(int c) {
-  register int n asm ("r2");
-  n = c;
-  SYSTRAP(OUTCHR);
-  return;
-}
-
-static int readchar(void) {
-  register int n asm ("r2");
-  SYSTRAP(INCHR);
-  return(n);
-}
-
-int read(int file, char *ptr, int len) {
-  int todo;
-
-  for (todo = len; todo; --todo) {
-    *ptr++ = readchar();
-  }
-
-  return(len);
-}
-
-int lseek(int file, int ptr, int dir) {
-  return 0;
-}
-
-int write(int file, char *ptr, int len) {
-  int todo;
-  
-  for (todo = len; todo; --todo) {
-    writechar(*ptr++);
-  }
-  return(len);
-}
-
-int close(int file) {
-  return(-1);
-}
-
-caddr_t sbrk(int incr) {
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-
-  if (heap_end == 0) 
-  {
-    heap_end = &end;
-  }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return((caddr_t) prev_heap_end);
-}
-
-int isatty(int file) {
-  return(1);
-}
-
-int fstat(int file, struct stat *st) {
-  st->st_mode = S_IFCHR;
-  return(0);
-}
-
-int stat(char *filename, struct stat *st) {
-  st->st_mode = S_IFCHR;
-  return(0);
-}
-
-int open(const char *path, int flags) {
-  return(0);
-}
-
-
-int _exit() {
-  SYSTRAP(RETURN);
-}
-
-int execve(char *name, char **argv, char **env) {
-  errno = ENOMEM;
-  return(-1);
-}
-
-int fork() {
-  errno = EAGAIN;
-  return(-1);
-}
-
-int getpid() {
-  return(1);
-}
-
-int kill(int pid, int sig) {
-  errno = EINVAL;
-  return(-1);
-}
-
-int link(char *old, char *new) {
-  errno = EMLINK;
-  return(-1);
-}
-
-clock_t times(struct tms *buf) {
-  return(-1);
-}
-
-int unlink(char *name) {
-  errno = ENOENT;
-  return(-1);
-}
-
-int wait(int *status) {
-  errno = ECHILD;
-  return(-1);
-}
-
-/* end of syscalls.c */
diff --git a/newlib/libc/sys/mmixware/Makefile.am b/newlib/libc/sys/mmixware/Makefile.am
deleted file mode 100644
index 054220feb..000000000
--- a/newlib/libc/sys/mmixware/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c link.c lseek.c open.c pipe.c read.c \
-	sbrk.c stat.c time.c unlink.c utime.c wait.c write.c \
-	times.c gettime.c setjmp.S
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/mmixware/Makefile.in b/newlib/libc/sys/mmixware/Makefile.in
deleted file mode 100644
index e5fed4a69..000000000
--- a/newlib/libc/sys/mmixware/Makefile.in
+++ /dev/null
@@ -1,337 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c link.c lseek.c open.c pipe.c read.c \
-	sbrk.c stat.c time.c unlink.c utime.c wait.c write.c \
-	times.c gettime.c setjmp.S
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  _exit.o access.o chmod.o chown.o close.o creat.o \
-execv.o execve.o fork.o fstat.o getpid.o isatty.o kill.o link.o lseek.o \
-open.o pipe.o read.o sbrk.o stat.o time.o unlink.o utime.o wait.o \
-write.o times.o gettime.o setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/mmixware/_exit.c b/newlib/libc/sys/mmixware/_exit.c
deleted file mode 100644
index 127bda75d..000000000
--- a/newlib/libc/sys/mmixware/_exit.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* _exit for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-void _exit (int n)
-{
-  /* Unfortunately, the return status is not returned by Knuth's mmix
-     simulator, so it seems in effect ineffective.  We set it anyway;
-     there may be a purpose.  */
-  __asm__ ("SET $255,%0\n\tTRAP 0,0,0"
-	   : /* No outputs.  */
-	   : "r" (n)
-	   : "memory");
-}
diff --git a/newlib/libc/sys/mmixware/access.c b/newlib/libc/sys/mmixware/access.c
deleted file mode 100644
index a7b664620..000000000
--- a/newlib/libc/sys/mmixware/access.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* access for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-access (const char *fn, int flags)
-{
-  /* Ugh.  We don't have stat (), so we can't copy the other
-     implementations.  Opening a directory as a file usually works, so
-     let's try and open it and use the openability, regardless of what
-     kind of test or file it is.  */
-  long ret;
-
-  /* We'll just assume that if we can open the file for reading, then it's
-     Z-able, no matter what Z was.  */
-  ret = TRAP3f (SYS_Fopen, TMPFNO, fn, BinaryRead);
-  if (ret == 0)
-    {
-      /* Yes, this was readable.  As in other simulator access functions,
-	 we always return success in this case (though the others check
-	 for directory access).  */
-      TRAP1f (SYS_Fclose, TMPFNO);
-      return 0;
-    }
-
-  errno = EACCES;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/aclocal.m4 b/newlib/libc/sys/mmixware/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/mmixware/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/mmixware/chmod.c b/newlib/libc/sys/mmixware/chmod.c
deleted file mode 100644
index a328d6cce..000000000
--- a/newlib/libc/sys/mmixware/chmod.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* chmod stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-chmod (const char *path, mode_t mode)
-{
-  UNIMPLEMENTED (("path: %s, mode: %lu", path, (unsigned long) mode));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/chown.c b/newlib/libc/sys/mmixware/chown.c
deleted file mode 100644
index f4fc49cac..000000000
--- a/newlib/libc/sys/mmixware/chown.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* chown stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-chown (const char *path, short owner, short group)
-{
-  UNIMPLEMENTED (("path: %s, owner: %d, group: %d", path, owner, group));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/close.c b/newlib/libc/sys/mmixware/close.c
deleted file mode 100644
index d8203f4e2..000000000
--- a/newlib/libc/sys/mmixware/close.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* close for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_close (int file)
-{
-  if ((unsigned int) file >= N_MMIX_FILEHANDLES
-      || _MMIX_allocated_filehandle[file] == 0)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  _MMIX_allocated_filehandle[file] = 0;
-
-  if (TRAP1f (SYS_Fclose, file) != 0)
-    {
-      errno = EIO;
-      return -1;
-    }
-  return 0;
-}
diff --git a/newlib/libc/sys/mmixware/configure b/newlib/libc/sys/mmixware/configure
deleted file mode 100755
index 73b265e8d..000000000
--- a/newlib/libc/sys/mmixware/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt0.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/mmixware/configure.in b/newlib/libc/sys/mmixware/configure.in
deleted file mode 100644
index b9fa98875..000000000
--- a/newlib/libc/sys/mmixware/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/mmixware configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt0.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/mmixware/creat.c b/newlib/libc/sys/mmixware/creat.c
deleted file mode 100644
index 622dcfad2..000000000
--- a/newlib/libc/sys/mmixware/creat.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* creat for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-creat (const char *path,
-       /* We can't set the mode, so we have to ignore it.  */
-       mode_t mode)
-{
-  return open (path, O_CREAT|O_WRONLY|O_TRUNC);
-}
diff --git a/newlib/libc/sys/mmixware/crt0.c b/newlib/libc/sys/mmixware/crt0.c
deleted file mode 100644
index 63fda5019..000000000
--- a/newlib/libc/sys/mmixware/crt0.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* crt0 stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-/* At present this is just a placeholder, to be filled in, if the need
-   arises.  The main init contents is in gcc/config/mmix/crti.asm.
-
-   I think this file is not allowed to be empty.  So here goes:  */
-extern int _Dummy;
diff --git a/newlib/libc/sys/mmixware/execv.c b/newlib/libc/sys/mmixware/execv.c
deleted file mode 100644
index cae2813b5..000000000
--- a/newlib/libc/sys/mmixware/execv.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* execv stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-execv (const char *path, char *const argv[])
-{
-  UNIMPLEMENTED (("path: %s, argv: %p", path, argv));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/execve.c b/newlib/libc/sys/mmixware/execve.c
deleted file mode 100644
index 6477daebc..000000000
--- a/newlib/libc/sys/mmixware/execve.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* execve stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_execve (const char *path, char *const argv[], char *const envp[])
-{
-  UNIMPLEMENTED (("path: %s, argv: %p, envp: %p", path, argv, envp));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/fork.c b/newlib/libc/sys/mmixware/fork.c
deleted file mode 100644
index ad2705846..000000000
--- a/newlib/libc/sys/mmixware/fork.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* fork stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_fork ()
-{
-  UNIMPLEMENTED ((""));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/fstat.c b/newlib/libc/sys/mmixware/fstat.c
deleted file mode 100644
index 63a9ac788..000000000
--- a/newlib/libc/sys/mmixware/fstat.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* fstat for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  st->st_blksize = 4096;
-  return 0;
-}
diff --git a/newlib/libc/sys/mmixware/getpid.c b/newlib/libc/sys/mmixware/getpid.c
deleted file mode 100644
index 5190726bf..000000000
--- a/newlib/libc/sys/mmixware/getpid.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* getpid stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-_getpid (n)
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/mmixware/gettime.c b/newlib/libc/sys/mmixware/gettime.c
deleted file mode 100644
index 973c6dfda..000000000
--- a/newlib/libc/sys/mmixware/gettime.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* gettime stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/time.h"
-#include <errno.h>
-
-int
-_gettimeofday (struct timeval *tp, void *tzp)
-{
-  UNIMPLEMENTED (("timeval: %p, tzp: %p", tp, tzp));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/isatty.c b/newlib/libc/sys/mmixware/isatty.c
deleted file mode 100644
index 86729aa56..000000000
--- a/newlib/libc/sys/mmixware/isatty.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* isatty for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-isatty (fd)
-     int fd;
-{
-  return fd == 0 || fd == 1 || fd == 2;
-}
diff --git a/newlib/libc/sys/mmixware/kill.c b/newlib/libc/sys/mmixware/kill.c
deleted file mode 100644
index c01f53c81..000000000
--- a/newlib/libc/sys/mmixware/kill.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* kill for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-_kill (n, m)
-{
-  if (n == 1)
-    return TRAP1i (SYS_halt, 0);
-
-  errno = EPERM;
-  return -1;
-}
-
diff --git a/newlib/libc/sys/mmixware/link.c b/newlib/libc/sys/mmixware/link.c
deleted file mode 100644
index 0629163b3..000000000
--- a/newlib/libc/sys/mmixware/link.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* link stub for MMIXware.
-
-   Copyright (C) 2002 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_link ()
-{
-  errno = EMLINK;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/lseek.c b/newlib/libc/sys/mmixware/lseek.c
deleted file mode 100644
index 13a6ce14f..000000000
--- a/newlib/libc/sys/mmixware/lseek.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* lseek for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/unistd.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-off_t
-_lseek (int file,
-	off_t ptr,
-	int dir)
-{
-  off_t simoff = dir == SEEK_END ? -(ptr + 1) : ptr;
-  long ret;
-
-  if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  if (dir == SEEK_CUR)
-    {
-      long curpos = TRAP2f (SYS_Ftell, file, 0);
-
-      if (curpos == -1)
-	{
-	  errno = EIO;
-	  return -1;
-	}
-
-      ptr += (off_t) curpos;
-    }
-
-  ret = TRAP2f (SYS_Fseek, file, simoff);
-  if (ret == -1)
-    {
-      return -1;
-      errno = EIO;
-    }
-
-  ret = TRAP2f (SYS_Ftell, file, 0);
-  if (ret == -1)
-    {
-      errno = EIO;
-      return -1;
-    }
-
-  return ret;
-}
diff --git a/newlib/libc/sys/mmixware/open.c b/newlib/libc/sys/mmixware/open.c
deleted file mode 100644
index f0b9fbafe..000000000
--- a/newlib/libc/sys/mmixware/open.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* open for MMIXware.
-
-   Copyright (C) 2001, 2002 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <stdlib.h>
-#include <fcntl.h>
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-/* Let's keep the filehandle array here, since this is a primary
-   initializer of it.  */
-unsigned char _MMIX_allocated_filehandle[32] =
- {
-   1,
-   1,
-   1,
-   0, 0, 0, 0, 0,
-   0, 0, 0, 0, 0, 0, 0, 0,
-   0, 0, 0, 0, 0, 0, 0, 0,
-   0, 0, 0, 0, 0, 0, 0, 0
- };
-
-int
-_open (const char *path,
-       int flags, ...)
-{
-  long fileno;
-  unsigned char mode;
-  long append_contents = 0;
-  unsigned long prev_contents_size = 0;
-  char *prev_contents = NULL;
-  long ret;
-
-  for (fileno = 0;
-       fileno < (sizeof (_MMIX_allocated_filehandle) /
-		 sizeof (_MMIX_allocated_filehandle[0]));
-       fileno++)
-    if (_MMIX_allocated_filehandle[fileno] == 0)
-      break;
-
-  if (fileno == (sizeof (_MMIX_allocated_filehandle) /
-		 sizeof (_MMIX_allocated_filehandle[0])))
-    {
-      errno = EMFILE;
-      return -1;
-    }
-
-  /* We map this to a fopen call.  The flags parameter is stymied because
-     we don't support other than these flags.  */
-  if (flags & ~(O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_APPEND | O_TRUNC))
-    {
-      UNIMPLEMENTED (("path: %s, flags: %d", path, flags));
-      errno = ENOSYS;
-      return -1;
-    }
-
-  if ((flags & O_ACCMODE) == O_RDONLY)
-    mode = BinaryRead;
-  else if ((flags & (O_WRONLY | O_APPEND)) == (O_WRONLY | O_APPEND))
-    {
-      mode = BinaryReadWrite;
-      append_contents = 1;
-    }
-  else if ((flags & (O_RDWR | O_APPEND)) == (O_RDWR | O_APPEND))
-    {
-      mode = BinaryReadWrite;
-      append_contents = 1;
-    }
-  else if ((flags & (O_WRONLY | O_CREAT)) == (O_WRONLY | O_CREAT)
-	   || (flags & (O_WRONLY | O_TRUNC)) == (O_WRONLY | O_TRUNC))
-    mode = BinaryWrite;
-  else if ((flags & (O_RDWR | O_CREAT)) == (O_RDWR | O_CREAT))
-    mode = BinaryReadWrite;
-  else if (flags & O_RDWR)
-    mode = BinaryReadWrite;
-  else
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  if (append_contents)
-    {
-      /* BinaryReadWrite is equal to "w+", so it truncates the file rather
-	 than keeping the contents, as can be imagined if you're looking
-	 for append functionality.  The only way we can keep the contents
-	 so we can append to it, is by first reading in and saving the
-	 contents, then re-opening the file as BinaryReadWrite and write
-	 the previous contents.  This seems to work for the needs of
-	 simple test-programs.  */
-      long openexist = TRAP3f (SYS_Fopen, fileno, path, BinaryRead);
-      if (openexist == 0)
-	{
-	  /* Yes, this file exists, now opened, so let's read it and keep
-             the contents.  Better have the memory around for this to
-             work.  */
-	  long seekval = TRAP2f (SYS_Fseek, fileno, -1);
-
-	  if (seekval == 0)
-	    {
-	      prev_contents_size = TRAP1f (SYS_Ftell, fileno);
-
-	      /* If the file has non-zero size, we have something to
-		 append to.  */
-	      if (prev_contents_size != 0)
-		{
-		  /* Start reading from the beginning.  Ignore the return
-		     value from this call: we'll notice if we can't read
-		     as much as we want.  */
-		  TRAP2f (SYS_Fseek, fileno, 0);
-
-		  prev_contents = malloc (prev_contents_size);
-		  if (prev_contents != 0)
-		    {
-		      /* I don't like the thought of trying to read the
-			 whole file all at once, disregarding the size,
-			 because the host system might not support that
-			 and we'd get funky errors.  Read in 32k at a
-			 time.  */
-		      char *ptr = prev_contents;
-		      unsigned long read_more = prev_contents_size;
-		      unsigned long chunk_size = 1 << 15;
-
-		      while (read_more >= chunk_size)
-			{
-			  long readval
-			    = TRAP3f (SYS_Fread, fileno, ptr, chunk_size);
-
-			  if (readval != 0)
-			    {
-			      free (prev_contents);
-			      TRAP1f (SYS_Fclose, fileno);
-			      errno = EIO;
-			      return -1;
-			    }
-			  read_more -= chunk_size;
-			  ptr += chunk_size;
-			}
-
-		      if (read_more != 0)
-			{
-			  long readval
-			    = TRAP3f (SYS_Fread, fileno, ptr, read_more);
-			  if (readval != 0)
-			    {
-			      free (prev_contents);
-			      TRAP1f (SYS_Fclose, fileno);
-			      errno = EIO;
-			      return -1;
-			    }
-			}
-		    }
-		  else
-		    {
-		      /* Malloc of area to copy to failed.  The glibc
-			 manpage says its open can return ENOMEM due to
-			 kernel memory failures, so let's do that too
-			 here.  */
-		      errno = ENOMEM;
-		      return -1;
-		    }
-		}
-	    }
-	  else
-	    {
-	      /* Seek failed.  Gotta be some I/O error.  */
-	      errno = EIO;
-	      return -1;
-	    }
-
-	  TRAP1f (SYS_Fclose, fileno);
-	}
-    }
-
-  ret = TRAP3f (SYS_Fopen, fileno, path, mode);
-  if (ret < 0)
-    {
-      /* It's totally unknown what the error was.  We'll just take our
-	 chances and assume ENOENT.  */
-      errno = ENOENT;
-      return -1;
-    }
-
-  if (prev_contents_size != 0)
-    {
-      /* Write out the previous contents, a chunk at a time.  Leave the
-	 file pointer at the end of the file.  */
-      unsigned long write_more = prev_contents_size;
-      unsigned long chunk_size = 1 << 15;
-      char *ptr = prev_contents;
-
-      while (write_more >= chunk_size)
-	{
-	  long writeval
-	    = TRAP3f (SYS_Fwrite, fileno, ptr, chunk_size);
-	  if (writeval != 0)
-	    {
-	      free (prev_contents);
-	      TRAP1f (SYS_Fclose, fileno);
-	      errno = EIO;
-	      return -1;
-	    }
-	  write_more -= chunk_size;
-	  ptr += chunk_size;
-	}
-      if (write_more != 0)
-	{
-	  long writeval
-	    = TRAP3f (SYS_Fwrite, fileno, ptr, write_more);
-	  if (writeval != 0)
-	    {
-	      free (prev_contents);
-	      TRAP1f (SYS_Fclose, fileno);
-	      errno = EIO;
-	      return -1;
-	    }
-	}
-
-      free (prev_contents);
-    }
-
-  _MMIX_allocated_filehandle[fileno] = 1;
-
-  return fileno;
-}
diff --git a/newlib/libc/sys/mmixware/pipe.c b/newlib/libc/sys/mmixware/pipe.c
deleted file mode 100644
index f980bcdb1..000000000
--- a/newlib/libc/sys/mmixware/pipe.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* pipe stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-pipe (int *fd)
-{
-  UNIMPLEMENTED (("fd: %p", fd));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/read.c b/newlib/libc/sys/mmixware/read.c
deleted file mode 100644
index f0f5e22f9..000000000
--- a/newlib/libc/sys/mmixware/read.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* read for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_read (int file,
-       char *ptr,
-       size_t len)
-{
-  long ret;
-
-  if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  if (isatty(file))
-    {
-      ret = TRAP3f (SYS_Fgets, file, ptr, len);
-
-      if (ret == -1)
-        return 0;
-
-      return ret;
-    }
-
-  ret = TRAP3f (SYS_Fread, file, ptr, len);
-
-  /* Map the return codes:
-     -1-len: an error.  We return -1.
-     0: success.  We return len.
-     n-len: end-of-file after n chars read.  We return n. */
-  if (ret == 0)
-    return len;
-
-  if (ret == -1 - (long) len)
-    {
-      /* We don't know the nature of the failure, so this is an
-	 approximation.  */
-      errno = EIO;
-      return -1;
-    }
-
-  return ret + len;
-}
diff --git a/newlib/libc/sys/mmixware/sbrk.c b/newlib/libc/sys/mmixware/sbrk.c
deleted file mode 100644
index de5ce5dac..000000000
--- a/newlib/libc/sys/mmixware/sbrk.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* sbrk for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-extern char *_Sbrk_high;
-
-/* When the program is loaded, the first location in Pool_Segment holds
-   the first available octabyte in the memory pool (a.k.a. the heap);
-   somewhere after the command-line parameters.  We don't have to
-   initialize that location, we can just use it straight up as a pointer;
-   just point the symbol there.
-
-   This file will be compiled with -no-builtin-syms, so we need to define
-   Pool_Segment and any other symbols that would be predefined in mmixal.  */
-
-__asm__ (" .global _Sbrk_high\n"
-	 "_Sbrk_high	IS	Pool_Segment\n"
-	 "Pool_Segment	IS	0x40<<56");
-
-caddr_t
-_sbrk (size_t incr)
-{
-  extern char end;		/* Defined by the linker */
-  char *prev_heap_end;
-
-  prev_heap_end = _Sbrk_high;
-  _Sbrk_high += incr;
-  return (caddr_t) prev_heap_end;
-}
diff --git a/newlib/libc/sys/mmixware/setjmp.S b/newlib/libc/sys/mmixware/setjmp.S
deleted file mode 100644
index 862273dd5..000000000
--- a/newlib/libc/sys/mmixware/setjmp.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/* Setjmp and longjmp for mmix.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.
-
-   jmp_buf[5]:
-   0:	fp
-   1:	rJ (return-address)
-   2:	sp
-   3:	rO *before* the setjmp call.
-   4:	temporary storage.  Reserved between setjmp and longjmp.  */
-
-#ifdef __MMIX_ABI_GNU__
-#define arg1 $231
-#define arg2 $232
-#define outret $231
-#define popval 0
-#else
-#define arg1 $0
-#define arg2 $1
-#define outret $0
-#define popval 1
-#endif
-
-	.section .text.setjmp,"ax",@progbits
-	.global setjmp
-setjmp:
-% Store fp, sp and return address.  Recycle the static-chain and
-% structure-return registers as temporary register, since we need to keep
-% the jmp_buf (parameter 1) and the return address across a "POP".
-	SET  $251,arg1
-	STOU $253,$251,0
-	GET  $252,rJ
-	STOU $252,$251,8
-	STOU $254,$251,16
-	SETL outret,0
-
-% Jump through hoops to get the value of rO *before* the setjmp call.
-	GETA $255,0f
-	PUT  rJ,$255
-	POP  popval,0
-0:
-	GET  $255,rO
-	STOU $255,$251,24
-	GO   $255,$252,0
-	.size setjmp,.-setjmp
-
-	.section .text.longjmp,"ax",@progbits
-	.global longjmp
-longjmp:
-% Reset arg2 to 1 if it is 0 (see longjmp(2)) and store it in jmp_buf.
-% Save arg1 in a global register, since it will be destroyed by the POPs
-% (in the mmixware ABI).
-	CSZ  arg2,arg2,1
-	STOU arg2,arg1,32
-	SET  $251,arg1
-
-% Loop and "POP 0,0" until rO is the expected value, like
-% the expansion of nonlocal_goto_receiver, except that we put the return
-% value in the right register and make sure that the POP causes it to
-% enter the right return-value register as seen by the caller.  For the
-% GNU ABI, it is unnecessary to do this in the loop and perhaps the memory
-% access can be hoisted outside the loop, but this is safe and simple and
-% I see no need to optimize longjmps.
-	GETA $255,0f
-	PUT  rJ,$255
-	LDOU $255,$251,24
-0:
-	GET  $252,rO
-	CMPU $252,$252,$255
-	BNP  $252,1f
-	LDOU outret,$251,32
-	POP  popval,0
-1:
-	LDOU $253,$251,0
-	LDOU $255,$251,8
-	LDOU $254,$251,16
-	GO   $255,$255,0
- 	.size longjmp,.-longjmp
diff --git a/newlib/libc/sys/mmixware/stat.c b/newlib/libc/sys/mmixware/stat.c
deleted file mode 100644
index b008a8263..000000000
--- a/newlib/libc/sys/mmixware/stat.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* stat stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  UNIMPLEMENTED (("path: %s, st: %p", path, st));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/sys/syscall.h b/newlib/libc/sys/mmixware/sys/syscall.h
deleted file mode 100644
index e9e1ff4db..000000000
--- a/newlib/libc/sys/mmixware/sys/syscall.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/* syscall defines for MMIXware.
-
-   Copyright (C) 2001, 2002 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-/* These are the mmixware simulator calls that are of use in newlib.  */
-
-#define SYS_halt	0
-#define	SYS_Fopen	1
-#define	SYS_Fclose	2
-#define	SYS_Fread	3
-#define	SYS_Fgets	4
-#define	SYS_Fwrite	6
-#define	SYS_Fseek	9
-#define	SYS_Ftell	10
-
-
-enum MMIX_filemode
- {
-   TextRead = 0,
-   TextWrite = 1,
-   BinaryRead = 2,
-   BinaryWrite = 3,
-   BinaryReadWrite = 4
- };
-
-#define N_MMIX_FILEHANDLES 32
-
-/* We store a bitmap of allocated filehandles
-   _MMIX_allocated_filehandle[fileno] in an array.  There are 32 of them.
-   Indexes 0, 1 and 2 are allocated from start.  The reason we keep track
-   of them is that *we* have to allocate a filehandle when opening a file.
-   Had we got a filehandle from the simulator, we wouldn't have to keep
-   track of it.  A value of 0 denotes a free handle.  */
-extern unsigned char _MMIX_allocated_filehandle[N_MMIX_FILEHANDLES];
-
-/* We use this file-handle number as a temporary; not used by usual file
-   I/O.  */
-#define TMPFNO 127
-
-/* Simulator call with one argument.  Also used for zero-argument calls;
-   pass a zero as ARG1.  Make the asm volatile so we can safely ignore the
-   return-value and only get the benefit from the supposed side-effect
-   without the asm being optimized away.  */
-#define TRAP1i(FUN, ARG1)			\
- ({ long ret_;					\
-    __asm__ __volatile__			\
-      ("TRAP 0,%1,%2\n\tSET %0,$255"		\
-       : "=r" (ret_) : "i" (FUN), "i" (ARG1)	\
-       : "memory");				\
-    ret_;					\
- })
-
-/* Helper macros to cope with the file-handle parameter to the simulator
-   being *constant*.  We support up to 32 simultaneously open files.  Make
-   the asm volatile so we can safely ignore the return-value and get the
-   benefit from the supposed side-effect without the asm being optimized
-   away.  */
-
-#define I3f(FUN, ARG1, N, ARGS)				\
- if (ARG1 == N)						\
-   __asm__ __volatile__					\
-     ("SET $255,%3\n\tTRAP 0,%1,%2\n\tSET %0,$255"	\
-      : "=r" (ret_) : "i" (FUN), "i" (N), "r" (ARGS)	\
-      : "memory")
-
-/* Using if:s rather than switches to help GCC optimize the rest away.  */
-#define DO32(FUN, ARG1, ARGS)			\
-    I3f (FUN, ARG1, 0, ARGS);			\
-    else I3f (FUN, ARG1, 1, ARGS);		\
-    else I3f (FUN, ARG1, 2, ARGS);		\
-    else I3f (FUN, ARG1, 3, ARGS);		\
-    else I3f (FUN, ARG1, 4, ARGS);		\
-    else I3f (FUN, ARG1, 5, ARGS);		\
-    else I3f (FUN, ARG1, 6, ARGS);		\
-    else I3f (FUN, ARG1, 7, ARGS);		\
-    else I3f (FUN, ARG1, 8, ARGS);		\
-    else I3f (FUN, ARG1, 9, ARGS);		\
-    else I3f (FUN, ARG1, 10, ARGS);		\
-    else I3f (FUN, ARG1, 11, ARGS);		\
-    else I3f (FUN, ARG1, 12, ARGS);		\
-    else I3f (FUN, ARG1, 13, ARGS);		\
-    else I3f (FUN, ARG1, 14, ARGS);		\
-    else I3f (FUN, ARG1, 15, ARGS);		\
-    else I3f (FUN, ARG1, 16, ARGS);		\
-    else I3f (FUN, ARG1, 17, ARGS);		\
-    else I3f (FUN, ARG1, 18, ARGS);		\
-    else I3f (FUN, ARG1, 19, ARGS);		\
-    else I3f (FUN, ARG1, 20, ARGS);		\
-    else I3f (FUN, ARG1, 21, ARGS);		\
-    else I3f (FUN, ARG1, 22, ARGS);		\
-    else I3f (FUN, ARG1, 23, ARGS);		\
-    else I3f (FUN, ARG1, 24, ARGS);		\
-    else I3f (FUN, ARG1, 25, ARGS);		\
-    else I3f (FUN, ARG1, 26, ARGS);		\
-    else I3f (FUN, ARG1, 27, ARGS);		\
-    else I3f (FUN, ARG1, 28, ARGS);		\
-    else I3f (FUN, ARG1, 29, ARGS);		\
-    else I3f (FUN, ARG1, 30, ARGS);		\
-    else I3f (FUN, ARG1, 31, ARGS);		\
-    else					\
-      {						\
-        errno = EBADF;				\
-	return -1;				\
-      }
-
-#define TRAP1f(FUN, ARG1)			\
- ({ long ret_;					\
-    DO32 (FUN, ARG1, 0);			\
-    ret_;					\
- })
-
-#define TRAP2f(FUN, ARG1, ARG2)			\
- ({ long ret_;					\
-    DO32 (FUN, ARG1, ARG2);			\
-    ret_;					\
- })
-
-#define TRAP3f(FUN, ARG1, ARG2, ARG3)				\
- ({ long ret_;							\
-    unsigned long args_[]					\
-      = { (unsigned long) (ARG2), (unsigned long) (ARG3) };	\
-    DO32 (FUN, ARG1, args_);					\
-    ret_;							\
- })
-
-#ifndef __GNUC__
-/* Probably will not happen.  Nevertheless...  */
-# define UNIMPLEMENTED(MSG)
-#else
-# define UNIMPLEMENTED(MSG) UNIMPLEMENTEDi MSG
-# define UNIMPLEMENTEDi(MSG, ARGS...)					\
- do {									\
-     char buf[2000];							\
-     sprintf (buf, "UNIMPLEMENTED %s in %s\n", __FUNCTION__, __FILE__);	\
-     write (2, buf, strlen (buf));					\
-     sprintf (buf, MSG , ##ARGS);					\
-     write (2, buf, strlen (buf));					\
-     write (2, "\n", 1);						\
- } while (0)
-#endif
diff --git a/newlib/libc/sys/mmixware/time.c b/newlib/libc/sys/mmixware/time.c
deleted file mode 100644
index 14be19b34..000000000
--- a/newlib/libc/sys/mmixware/time.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* time stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-time_t
-time (time_t *tloc)
-{
-  /* Nowhere to get time reasonably from; neither of rC, rI and rU seems
-     usable without assuming some scaling of mems and oops to real time.  */
-  time_t thetime = 0;
-
-  if (tloc)
-    *tloc = thetime;
-
-  return thetime;
-}
diff --git a/newlib/libc/sys/mmixware/times.c b/newlib/libc/sys/mmixware/times.c
deleted file mode 100644
index 6275ef34e..000000000
--- a/newlib/libc/sys/mmixware/times.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* times stub for MMIXware.
-
-   Copyright (C) 2001, 2002 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/times.h"
-
-clock_t
-_times (struct tms *buffer)
-{
-  memset (buffer, 0, sizeof (*buffer));
-  return 0;
-}
diff --git a/newlib/libc/sys/mmixware/unlink.c b/newlib/libc/sys/mmixware/unlink.c
deleted file mode 100644
index b70df2dc3..000000000
--- a/newlib/libc/sys/mmixware/unlink.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* unlink stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int
-_unlink ()
-{
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/utime.c b/newlib/libc/sys/mmixware/utime.c
deleted file mode 100644
index 47259fcff..000000000
--- a/newlib/libc/sys/mmixware/utime.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* utime stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-utime (path, times)
-     const char *path;
-     char *times;
-{
-  UNIMPLEMENTED (("path: %s, times: %p", path, times));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/wait.c b/newlib/libc/sys/mmixware/wait.c
deleted file mode 100644
index 9c66f3b76..000000000
--- a/newlib/libc/sys/mmixware/wait.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* wait stub for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_wait (statusp)
-     int *statusp;
-{
-  UNIMPLEMENTED (("statusp: %p", statusp));
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/mmixware/write.c b/newlib/libc/sys/mmixware/write.c
deleted file mode 100644
index 74d5fcaa7..000000000
--- a/newlib/libc/sys/mmixware/write.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* write for MMIXware.
-
-   Copyright (C) 2001 Hans-Peter Nilsson
-
-   Permission to use, copy, modify, and distribute this software is
-   freely granted, provided that the above copyright notice, this notice
-   and the following disclaimer are preserved with no changes.
-
-   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  */
-
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <errno.h>
-
-int
-_write ( int file,
-	 char *ptr,
-	 size_t len)
-{
-  long ret;
-
-  if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0)
-    {
-      errno = EBADF;
-      return -1;
-    }
-
-  ret = TRAP3f (SYS_Fwrite, file, ptr, len);
-
-  if (ret < 0)
-    {
-      errno = EIO;
-      return -1;
-    }
-
-  return len;
-}
diff --git a/newlib/libc/sys/netware/Makefile.am b/newlib/libc/sys/netware/Makefile.am
deleted file mode 100644
index e112bac10..000000000
--- a/newlib/libc/sys/netware/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	getpid.c \
-	link.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/netware/Makefile.in b/newlib/libc/sys/netware/Makefile.in
deleted file mode 100644
index 34ccc2b64..000000000
--- a/newlib/libc/sys/netware/Makefile.in
+++ /dev/null
@@ -1,332 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	getpid.c \
-	link.c
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  getpid.o link.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/netware/aclocal.m4 b/newlib/libc/sys/netware/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/netware/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/netware/configure b/newlib/libc/sys/netware/configure
deleted file mode 100755
index 37f2328cc..000000000
--- a/newlib/libc/sys/netware/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=link.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/netware/configure.in b/newlib/libc/sys/netware/configure.in
deleted file mode 100644
index 16f824c1f..000000000
--- a/newlib/libc/sys/netware/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/netware configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(link.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/netware/crt0.c b/newlib/libc/sys/netware/crt0.c
deleted file mode 100644
index 1d796d025..000000000
--- a/newlib/libc/sys/netware/crt0.c
+++ /dev/null
@@ -1,4 +0,0 @@
-/* I have a copy of something that would serve as a NetWare crt0.o,
-   but it is copyright by Novell.  */
-
-int _dummy_crt0 = 1;
diff --git a/newlib/libc/sys/netware/getpid.c b/newlib/libc/sys/netware/getpid.c
deleted file mode 100644
index 9218dfcc3..000000000
--- a/newlib/libc/sys/netware/getpid.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* NetWare version of getpid.  This is supposed to return a unique
-   identifier which is used to create temporary file names.  We use
-   the thread ID.  I hope this is unique.  */
-
-#include <unistd.h>
-
-pid_t
-getpid ()
-{
-  return GetThreadID ();
-}
diff --git a/newlib/libc/sys/netware/link.c b/newlib/libc/sys/netware/link.c
deleted file mode 100644
index d816d0ac6..000000000
--- a/newlib/libc/sys/netware/link.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* NetWare version of link.  This can not be implemented using an
-   MS-DOS file system.  */
-
-#include <unistd.h>
-#include <errno.h>
-
-#undef errno
-extern int errno;
-
-int
-link (path1, path2)
-     const char *path1;
-     const char *path2;
-{
-  errno = ENOSYS;
-  return -1;
-}
diff --git a/newlib/libc/sys/rtems/Makefile.am b/newlib/libc/sys/rtems/Makefile.am
deleted file mode 100644
index 24b82b83e..000000000
--- a/newlib/libc/sys/rtems/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = dummysys.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/rtems/Makefile.in b/newlib/libc/sys/rtems/Makefile.in
deleted file mode 100644
index 8410a334a..000000000
--- a/newlib/libc/sys/rtems/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = dummysys.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  dummysys.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/rtems/aclocal.m4 b/newlib/libc/sys/rtems/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/rtems/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/rtems/configure b/newlib/libc/sys/rtems/configure
deleted file mode 100755
index e1ab2829a..000000000
--- a/newlib/libc/sys/rtems/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=dummysys.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/rtems/configure.in b/newlib/libc/sys/rtems/configure.in
deleted file mode 100644
index 5d9abcf05..000000000
--- a/newlib/libc/sys/rtems/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/rtems configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(dummysys.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/rtems/crt0.c b/newlib/libc/sys/rtems/crt0.c
deleted file mode 100644
index 99b91feea..000000000
--- a/newlib/libc/sys/rtems/crt0.c
+++ /dev/null
@@ -1,87 +0,0 @@
-void rtems_provides_crt0( void ) {}
-/*
- *  RTEMS Fake crt0
- *
- *  Each RTEMS BSP provides its own crt0 and linker script.  Unfortunately
- *  this means that crt0 and the linker script are not available as
- *  each tool is configured.  Without a crt0 and linker script, some
- *  targets do not successfully link "conftest.c" during the configuration 
- *  process.  So this fake crt0.c provides all the symbols required to
- *  successfully link a program.  The resulting program will not run
- *  but this is enough to satisfy the autoconf macro AC_PROG_CC.
- */
-
-/* RTEMS provides some of its own routines including a Malloc family */
-
-void *malloc() { return 0; }
-void *realloc() { return 0; }
-void free() { ; }
-void abort() { ; }
-int raise() { return -1; }
-void rtems_gxx_mutex_init() { }
-int rtems_gxx_mutex_lock() { return -1; }
-int rtems_gxx_mutex_unlock() { return -1; }
-int rtems_gxx_once() { return -1; }
-
-/* gcc can implicitly generate references to these */
-strcmp() {}
-strcpy() {}
-strlen() {}
-memcmp() {}
-memcpy() {}
-memset() {}
-
-/* The PowerPC expects certain symbols to be defined in the linker script. */
-
-#if defined(__PPC__)
-  int __SDATA_START__;  int __SDATA2_START__;
-  int __GOT_START__;    int __GOT_END__;
-  int __GOT2_START__;   int __GOT2_END__;
-  int __SBSS_END__;     int __SBSS2_END__;
-  int __FIXUP_START__;  int __FIXUP_END__;
-  int __EXCEPT_START__; int __EXCEPT_END__;
-  int __init;           int __fini;
-  int __CTOR_LIST__;    int __CTOR_END__;
-  int __DTOR_LIST__;    int __DTOR_END__;
-#endif
-
-/* The SH expects certain symbols to be defined in the linker script. */
-
-#if defined(__sh__)
-int __EH_FRAME_BEGIN__;
-#endif
-
-/*  The hppa expects this to be defined in the real crt0.s. 
- *  Also for some reason, the hppa1.1 does not find atexit()
- *  during the AC_PROG_CC tests.
- */
-
-#if defined(__hppa__)
-/*
-  asm ( ".subspa \$GLOBAL\$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=40");
-  asm ( ".export \$global\$" );
-  asm ( "\$global\$:");
-*/
-
-  asm (".text");
-  asm (".global");
-  asm (".EXPORT $$dyncall,ENTRY");
-  asm ("$$dyncall:");
-  int atexit(void (*function)(void)) { return 0; }
-#endif
-
-
-/*
- *  The AMD a29k generates code expecting the following.
- */
-
-#if defined(_AM29000) || defined(_AM29K)
-asm (".global V_SPILL, V_FILL" );
-asm (".global V_EPI_OS, V_BSD_OS" );
-
-asm (".equ    V_SPILL, 64" );
-asm (".equ    V_FILL, 65" );
-
-asm (".equ    V_BSD_OS, 66" );
-asm (".equ    V_EPI_OS, 69" );
-#endif
diff --git a/newlib/libc/sys/rtems/dummysys.c b/newlib/libc/sys/rtems/dummysys.c
deleted file mode 100644
index 81091182e..000000000
--- a/newlib/libc/sys/rtems/dummysys.c
+++ /dev/null
@@ -1 +0,0 @@
-void not_required_by_rtems( void ) {}
diff --git a/newlib/libc/sys/rtems/include/limits.h b/newlib/libc/sys/rtems/include/limits.h
deleted file mode 100644
index 9d1162420..000000000
--- a/newlib/libc/sys/rtems/include/limits.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  This file lists the minimums for the limits set by each of
- *  the POSIX features subsets.
- *
- *  XXX: Careful attention needs to be paid to section 2.8 in 1003.1b-1993
- *       to segregrate the variables below based on their "class" according
- *       to our implementation.  We also need to set the Run-Time Invariant
- *       and other related values.
- *
- *  $Id$
- */
-
-#ifndef _GCC_LIMITS_H_  /* if we have not seen gcc's limits.h yet */
-#include_next <limits.h>
-#endif
-
-#include <sys/syslimits.h>
-
-#ifndef __POSIX_LIMITS_h
-#define __POSIX_LIMITS_h
-
-/****************************************************************************
- ****************************************************************************
- *                                                                          *
- *         P1003.1b-1993 defines the constants below this comment.          *
- *                                                                          *
- **************************************************************************** 
- ****************************************************************************/
-
-#define _POSIX_AIO_LISTIO_MAX   2
-#define _POSIX_AIO_MAX          1
-#define _POSIX_ARG_MAX          4096
-#define _POSIX_CHILD_MAX        6
-#define _POSIX_DELAYTIMER_MAX   32
-#define _POSIX_LINK_MAX         8
-#define _POSIX_MAX_CANON        255
-#define _POSIX_MAX_INPUT        255
-#define _POSIX_MQ_OPEN_MAX      8
-#define _POSIX_MQ_PRIO_MAX      32
-#define _POSIX_NAME_MAX         255
-#define _POSIX_NGROUPS_MAX      0
-#define _POSIX_OPEN_MAX         16
-#define _POSIX_PATH_MAX         255
-#define _POSIX_PIPE_BUF         512
-#define _POSIX_RTSIG_MAX        8
-#define _POSIX_SEM_NSEMS_MAX    256
-#define _POSIX_SEM_VALUE_MAX    32767
-#define _POSIX_SIGQUEUE_MAX     32
-#define _POSIX_SSIZE_MAX        32767
-#define _POSIX_STREAM_MAX       8
-#define _POSIX_TIMER_MAX        32
-#define _POSIX_TZNAME_MAX       3
-
-/*
- *  Definitions of the following may be omitted if the value is >= stated
- *  minimum but is indeterminate.
- */
-
-#define AIO_LISTIO_MAX          2
-#define AIO_MAX                 1
-#define AIO_PRIO_DELTA_MAX      0
-#define DELAYTIMER_MAX          32
-#define MQ_OPEN_MAX             8
-#define MQ_PRIO_MAX             32
-#define PAGESIZE                1
-#define RTSIG_MAX               8
-#define SEM_NSEMS_MAX           256
-#define SEM_VALUE_MAX           32767
-#define SIGQUEUE_MAX            32
-#define STREAM_MAX              8
-#define TIMER_MAX               32
-#define TZNAME_MAX              3
-
-/*
- *  Invariant values
- */
-
-#define SSIZE_MAX               32767
-
-/*
- *  Maximum Values
- */
-
-#define _POSIX_CLOCKRES_MIN      0   /* in nanoseconds */
-
-/****************************************************************************
- ****************************************************************************
- *                                                                          *
- *         P1003.1c/D10 defines the constants below this comment.           *
- *
- *  XXX: doc seems to have printing problems in this table :(
- *                                                                          *
- **************************************************************************** 
- ****************************************************************************/
-
-#define _POSIX_LOGIN_NAME_MAX                9
-#define _POSIX_THREAD_DESTRUCTOR_ITERATIONS  4
-#define _POSIX_THREAD_KEYS_MAX               28
-#define _POSIX_THREAD_THREADS_MAX            64
-#define _POSIX_TTY_NAME_MAX                  9
-
-/*
- *  Definitions of the following may be omitted if the value is >= stated
- *  minimum but is indeterminate.
- *
- *  NOTE:  LOGIN_NAME_MAX is named LOGNAME_MAX under Solaris 2.x.  Perhaps
- *         the draft specification will be changing.  jrs 05/24/96
- */
-
-#define LOGIN_NAME_MAX                      _POSIX_LOGIN_NAME_MAX
-#define TTY_NAME_MAX                        _POSIX_TTY_NAME_MAX
-#define PTHREAD_DESTRUCTOR_ITERATIONS       _POSIX_THREAD_DESTRUCTOR_ITERATIONS
-
-/*
- *  RTEMS is smart enough to give us the minimum stack size if we ask
- *  for too little.  Because the real RTEMS limit for this is cpu dependent
- *  AND rtems header files are not installed yet, we cannot use the cpu
- *  dependent constant CPU_STACK_MINIMUM_SIZE.  Moreover, we do not want
- *  to duplicate that information here so we will just let RTEMS magically
- *  give us its minimum stack size.
- *
- *  NOTE:  The other alternative is to have this be a macro for a 
- *         routine in RTEMS which returns the constant.
- */
-
-#define PTHREAD_STACK_MIN                   0
-
-/*
- *  The maximum number of keys (PTHREAD_KEYS_MAX) and threads
- *  (PTHREAD_THREADS_MAX) are configurable and may exceed the minimum.
- *
-#define PTHREAD_KEYS_MAX                    _POSIX_THREAD_KEYS_MAX
-#define PTHREAD_THREADS_MAX                 _POSIX_THREAD_THREADS_MAX
-*/
-
-
-/****************************************************************************
- ****************************************************************************
- *                                                                          *
- *         P1003.4b/D8 defines the constants below this comment.            *
- *                                                                          *
- **************************************************************************** 
- ****************************************************************************/
-
-#define _POSIX_INTERRUPT_OVERRUN_MAX        32
-
-/*
- *  Definitions of the following may be omitted if the value is >= stated
- *  minimum but is indeterminate.
- */
-
-#define INTERRUPT_OVERRUN_MAX               32
-
-/*
- *  Pathname Variables
- */
-
-#define MIN_ALLOC_SIZE      
-#define REC_MIN_XFER_SIZE   
-#define REC_MAX_XFER_SIZE   
-#define REC_INCR_XFER_SIZE  
-#define REC_XFER_ALIGN      
-#define MAX_ATOMIC_SIZE     
-
-#endif
-/* end of include file */
diff --git a/newlib/libc/sys/rtems/machine/limits.h b/newlib/libc/sys/rtems/machine/limits.h
deleted file mode 100644
index 5a6ee0337..000000000
--- a/newlib/libc/sys/rtems/machine/limits.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- *  $Id$
- */
-
-/* intentionally empty file */
-
diff --git a/newlib/libc/sys/rtems/machine/param.h b/newlib/libc/sys/rtems/machine/param.h
deleted file mode 100644
index 4168f1f6c..000000000
--- a/newlib/libc/sys/rtems/machine/param.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  $Id$
- */
-
-#ifndef _MACHINE_PARAM_H_
-#define	_MACHINE_PARAM_H_
-
-/*
- * These aren't really machine-dependent for RTEMS.....
- */
-
-/*
-#define MACHINE		"i386"
-#define MID_MACHINE	MID_I386
-*/
-
-/*
- * Round p (pointer or byte index) up to a correctly-aligned value
- * for all data types (int, long, ...).   The result is unsigned int
- * and must be cast to any desired pointer type.
- */
-#define ALIGNBYTES	(sizeof(int) - 1)
-#define ALIGN(p)	(((unsigned)(p) + ALIGNBYTES) & ~ALIGNBYTES)
-
-#define PAGE_SHIFT	12		/* LOG2(PAGE_SIZE) */
-#define PAGE_SIZE	(1<<PAGE_SHIFT)	/* bytes/page */
-#define PAGE_MASK	(PAGE_SIZE-1)
-#define NPTEPG		(PAGE_SIZE/(sizeof (pt_entry_t)))
-
-#define NPDEPG		(PAGE_SIZE/(sizeof (pd_entry_t)))
-#define PDRSHIFT	22		/* LOG2(NBPDR) */
-#define NBPDR		(1<<PDRSHIFT)	/* bytes/page dir */
-
-#define DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
-#define DEV_BSIZE	(1<<DEV_BSHIFT)
-
-#define BLKDEV_IOSIZE	2048
-#define MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */
-
-#define UPAGES	2		/* pages of u-area */
-
-/*
- * Constants related to network buffer management.
- * MCLBYTES must be no larger than CLBYTES (the software page size), and,
- * on machines that exchange pages of input or output buffers with mbuf
- * clusters (MAPPED_MBUFS), MCLBYTES must also be an integral multiple
- * of the hardware page size.
- */
-#ifndef	MSIZE
-#define MSIZE		128		/* size of an mbuf */
-#endif	/* MSIZE */
-
-#ifndef	MCLSHIFT
-#define MCLSHIFT	11		/* convert bytes to m_buf clusters */
-#endif	/* MCLSHIFT */
-#define MCLBYTES	(1 << MCLSHIFT)	/* size of an m_buf cluster */
-#define MCLOFSET	(MCLBYTES - 1)	/* offset within an m_buf cluster */
-
-/*
- * Some macros for units conversion
- */
-
-/* clicks to bytes */
-#define ctob(x)	((x)<<PAGE_SHIFT)
-
-/* bytes to clicks */
-#define btoc(x)	(((unsigned)(x)+PAGE_MASK)>>PAGE_SHIFT)
-
-/*
- * btodb() is messy and perhaps slow because `bytes' may be an off_t.  We
- * want to shift an unsigned type to avoid sign extension and we don't
- * want to widen `bytes' unnecessarily.  Assume that the result fits in
- * a daddr_t.
- */
-#define btodb(bytes)	 		/* calculates (bytes / DEV_BSIZE) */ \
-	(sizeof (bytes) > sizeof(long) \
-	 ? (daddr_t)((unsigned long long)(bytes) >> DEV_BSHIFT) \
-	 : (daddr_t)((unsigned long)(bytes) >> DEV_BSHIFT))
-
-#define dbtob(db)			/* calculates (db * DEV_BSIZE) */ \
-	((off_t)(db) << DEV_BSHIFT)
-
-/*
- * Mach derived conversion macros
- */
-#define trunc_page(x)		((unsigned)(x) & ~PAGE_MASK)
-#define round_page(x)		((((unsigned)(x)) + PAGE_MASK) & ~PAGE_MASK)
-
-#define atop(x)			((unsigned)(x) >> PAGE_SHIFT)
-#define ptoa(x)			((unsigned)(x) << PAGE_SHIFT)
-
-#endif /* !_MACHINE_PARAM_H_ */
diff --git a/newlib/libc/sys/rtems/sys/dirent.h b/newlib/libc/sys/rtems/sys/dirent.h
deleted file mode 100644
index 93808d312..000000000
--- a/newlib/libc/sys/rtems/sys/dirent.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _SYS_DIRENT_H
-# define _SYS_DIRENT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * This file was written to be compatible with the BSD directory
- * routines, so it looks like it.  But it was written from scratch.
- * Sean Eric Fagan, sef@Kithrup.COM
- *
- *  Copied to RTEMS configuration without modification.
- */
-
-typedef struct _dirdesc {
-	int	dd_fd;
-	long	dd_loc;
-	long	dd_size;
-	char	*dd_buf;
-	int	dd_len;
-	long	dd_seek;
-} DIR;
-
-# define __dirfd(dp)	((dp)->dd_fd)
-
-DIR *opendir(const char *);
-struct dirent *readdir(DIR *);
-void rewinddir(DIR *);
-int closedir(DIR *);
-void seekdir(DIR *dir, long loc);
-long telldir(DIR *dir);
-
-#include <sys/types.h>
-
-#include <limits.h>
-
-struct dirent {
-	long	d_ino;
-	off_t	d_off;
-	unsigned short	d_reclen;
-	/* we need better syntax for variable-sized arrays */
-	unsigned short	d_namlen;
-	char		d_name[NAME_MAX + 1];
-};
-
-#ifdef __cplusplus
-}
-#endif 
-
-
-#endif
diff --git a/newlib/libc/sys/rtems/sys/param.h b/newlib/libc/sys/rtems/sys/param.h
deleted file mode 100644
index 36db646b0..000000000
--- a/newlib/libc/sys/rtems/sys/param.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*-
- * Copyright (c) 1982, 1986, 1989, 1993
- *	The Regents of the University of California.  All rights reserved.
- * (c) UNIX System Laboratories, Inc.
- * All or some portions of this file are derived from material licensed
- * to the University of California by American Telephone and Telegraph
- * Co. or Unix System Laboratories, Inc. and are reproduced herein with
- * the permission of UNIX System Laboratories, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)param.h	8.3 (Berkeley) 4/4/95
- * $Id$
- */
-
-#ifndef _SYS_PARAM_H_
-#define _SYS_PARAM_H_
-
-/* from newlib's <sys/param.h> */
-
-#include <sys/config.h>
-
-#ifndef BIG_ENDIAN
-#define BIG_ENDIAN 4321
-#endif
-#ifndef LITTLE_ENDIAN
-#define LITTLE_ENDIAN 1234
-#endif
-
-# define HZ (60)
-# define PATHSIZE (1024)
-
-#ifndef BYTE_ORDER
-#ifdef __IEEE_LITTLE_ENDIAN
-#define BYTE_ORDER LITTLE_ENDIAN
-#else
-#define BYTE_ORDER BIG_ENDIAN
-#endif
-#endif
-
-/* end of from newlib's <sys/param.h> */
-
-#include <unistd.h>
-
-#define	BSD	199506		/* System version (year & month). */
-#define BSD4_3	1
-#define BSD4_4	1
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-#ifndef LOCORE
-#include <sys/types.h>
-#endif
-
-/*
- * Machine-independent constants (some used in following include files).
- * Redefined constants are from POSIX 1003.1 limits file.
- *
- * MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
- * MAXLOGNAME should be >= UT_NAMESIZE (see <utmp.h>)
- */
-#include <sys/syslimits.h>
-
-#define	MAXCOMLEN	16		/* max command name remembered */
-#define	MAXINTERP	32		/* max interpreter file name length */
-#define	MAXLOGNAME	12		/* max login name length */
-#define	MAXUPRC		CHILD_MAX	/* max simultaneous processes */
-#define	NCARGS		ARG_MAX		/* max bytes for an exec function */
-#define	NGROUPS		NGROUPS_MAX	/* max number groups */
-#define	NOFILE		OPEN_MAX	/* max open files per process */
-#define	NOGROUP		65535		/* marker for empty group set member */
-#define MAXHOSTNAMELEN	256		/* max hostname size */
-
-/* More types and definitions used throughout the kernel. */
-#ifdef KERNEL
-#include <sys/cdefs.h>
-#include <sys/errno.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/ucred.h>
-#include <sys/uio.h>
-#include <sys/rtprio.h>
-
-#ifndef FALSE
-#define	FALSE	0
-#endif
-#ifndef TRUE
-#define	TRUE	1
-#endif
-#endif
-
-/* Signals. */
-#include <sys/signal.h>
-
-/* Machine type dependent parameters. */
-#include <machine/param.h>
-#include <machine/limits.h>
-
-/*
- * Priorities.  Note that with 32 run queues, differences less than 4 are
- * insignificant.
- */
-#define	PSWP	0
-#define	PVM	4
-#define	PINOD	8
-#define	PRIBIO	16
-#define	PVFS	20
-#define	PZERO	22		/* No longer magic, shouldn't be here.  XXX */
-#define	PSOCK	24
-#define	PWAIT	32
-#define	PLOCK	36
-#define	PPAUSE	40
-#define	PUSER	50
-#define	MAXPRI	127		/* Priorities range from 0 through MAXPRI. */
-
-#define	PRIMASK	0x0ff
-#define	PCATCH	0x100		/* OR'd with pri for tsleep to check signals */
-
-#define	NZERO	0		/* default "nice" */
-
-#define	NBPW	sizeof(int)	/* number of bytes per word (integer) */
-
-#define	CMASK	022		/* default file mask: S_IWGRP|S_IWOTH */
-#define	NODEV	(dev_t)(-1)	/* non-existent device */
-
-/*
- * Clustering of hardware pages on machines with ridiculously small
- * page sizes is done here.  The paging subsystem deals with units of
- * CLSIZE pte's describing PAGE_SIZE (from machine/machparam.h) pages each.
- */
-#if 0
-#define	CLBYTES		(CLSIZE*PAGE_SIZE)
-#endif
-
-#define	CBLOCK	128		/* Clist block size, must be a power of 2. */
-#define CBQSIZE	(CBLOCK/NBBY)	/* Quote bytes/cblock - can do better. */
-				/* Data chars/clist. */
-#define	CBSIZE	(CBLOCK - sizeof(struct cblock *) - CBQSIZE)
-#define	CROUND	(CBLOCK - 1)	/* Clist rounding. */
-
-/*
- * File system parameters and macros.
- *
- * The file system is made out of blocks of at most MAXBSIZE units, with
- * smaller units (fragments) only in the last direct block.  MAXBSIZE
- * primarily determines the size of buffers in the buffer pool.  It may be
- * made larger without any effect on existing file systems; however making
- * it smaller make make some file systems unmountable.  Also, MAXBSIZE
- * must be less than MAXPHYS!!!  DFLTBSIZE is the average amount of
- * memory allocated by vfs_bio per nbuf.  BKVASIZE is the average amount
- * of kernel virtual space allocated per nbuf.  BKVASIZE should be >=
- * DFLTBSIZE.  If it is significantly bigger than DFLTBSIZE, then
- * kva fragmentation causes fewer performance problems.
- */
-#define	MAXBSIZE	65536
-#define BKVASIZE	8192
-#define DFLTBSIZE	4096
-#define MAXFRAG 	8
-
-/*
- * MAXPATHLEN defines the longest permissible path length after expanding
- * symbolic links. It is used to allocate a temporary buffer from the buffer
- * pool in which to do the name expansion, hence should be a power of two,
- * and must be less than or equal to MAXBSIZE.  MAXSYMLINKS defines the
- * maximum number of symbolic links that may be expanded in a path name.
- * It should be set high enough to allow all legitimate uses, but halt
- * infinite loops reasonably quickly.
- */
-#if !defined(__rtems__)
-#define	MAXPATHLEN	PATH_MAX
-#endif
-#define MAXSYMLINKS	32
-
-/* Bit map related macros. */
-#define	setbit(a,i)	((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define	clrbit(a,i)	((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define	isset(a,i)	((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define	isclr(a,i)	(((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-
-/* Macros for counting and rounding. */
-#ifndef howmany
-#define	howmany(x, y)	(((x)+((y)-1))/(y))
-#endif
-#define	rounddown(x, y)	(((x)/(y))*(y))
-#define	roundup(x, y)	((((x)+((y)-1))/(y))*(y))  /* to any y */
-#define	roundup2(x, y)	(((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */
-#define powerof2(x)	((((x)-1)&(x))==0)
-
-/* Macros for min/max. */
-#ifndef KERNEL
-#define	MIN(a,b) (((a)<(b))?(a):(b))
-#define	MAX(a,b) (((a)>(b))?(a):(b))
-#endif
-
-/*
- * Constants for setting the parameters of the kernel memory allocator.
- *
- * 2 ** MINBUCKET is the smallest unit of memory that will be
- * allocated. It must be at least large enough to hold a pointer.
- *
- * Units of memory less or equal to MAXALLOCSAVE will permanently
- * allocate physical memory; requests for these size pieces of
- * memory are quite fast. Allocations greater than MAXALLOCSAVE must
- * always allocate and free physical memory; requests for these
- * size allocations should be done infrequently as they will be slow.
- *
- * Constraints: PAGE_SIZE <= MAXALLOCSAVE <= 2 ** (MINBUCKET + 14), and
- * MAXALLOCSIZE must be a power of two.
- */
-#define MINBUCKET	4		/* 4 => min allocation of 16 bytes */
-#define MAXALLOCSAVE	(2 * PAGE_SIZE)
-
-/*
- * Scale factor for scaled integers used to count %cpu time and load avgs.
- *
- * The number of CPU `tick's that map to a unique `%age' can be expressed
- * by the formula (1 / (2 ^ (FSHIFT - 11))).  The maximum load average that
- * can be calculated (assuming 32 bits) can be closely approximated using
- * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
- *
- * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
- * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
- */
-#define	FSHIFT	11		/* bits to right of fixed binary point */
-#define FSCALE	(1<<FSHIFT)
-
-#endif	/* _SYS_PARAM_H_ */
diff --git a/newlib/libc/sys/rtems/sys/syslimits.h b/newlib/libc/sys/rtems/sys/syslimits.h
deleted file mode 100644
index 74c4dd273..000000000
--- a/newlib/libc/sys/rtems/sys/syslimits.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 1988, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)syslimits.h	8.1 (Berkeley) 6/2/93
- * $Id$
- */
-
-#ifndef _SYS_SYSLIMITS_H_
-#define _SYS_SYSLIMITS_H_
-
-#define	ARG_MAX			 4096	/* max bytes for an exec function */
-#ifndef CHILD_MAX
-#define	CHILD_MAX		    6	/* max simultaneous processes */
-#endif
-#define	LINK_MAX		    8	/* max file link count */
-#define	MAX_CANON		  255	/* max bytes in term canon input line */
-#define	MAX_INPUT		  255	/* max bytes in terminal input */
-#define	NAME_MAX		  255	/* max bytes in a file name */
-#define	NGROUPS_MAX		   16	/* max supplemental group id's */
-#ifndef OPEN_MAX
-#define	OPEN_MAX		   64	/* max open files per process */
-#endif
-#define	PATH_MAX		  255	/* max bytes in pathname */
-#define	PIPE_BUF		  512	/* max bytes for atomic pipe writes */
-#define	IOV_MAX			 1024	/* max elements in i/o vector */
-#define	BC_BASE_MAX		   99	/* max ibase/obase values in bc(1) */
-#define	BC_DIM_MAX		 2048	/* max array elements in bc(1) */
-#define	BC_SCALE_MAX		   99	/* max scale value in bc(1) */
-#define	BC_STRING_MAX		 1000	/* max const string length in bc(1) */
-#define	COLL_WEIGHTS_MAX	    0	/* max weights for order keyword */
-#define	EXPR_NEST_MAX		   32	/* max expressions nested in expr(1) */
-#define	LINE_MAX		 2048	/* max bytes in an input line */
-#define	RE_DUP_MAX		  255	/* max RE's in interval notation */
-
-#endif
diff --git a/newlib/libc/sys/rtems/sys/utime.h b/newlib/libc/sys/rtems/sys/utime.h
deleted file mode 100644
index 31d1c472d..000000000
--- a/newlib/libc/sys/rtems/sys/utime.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  $Id$
- */
-
-#ifndef __UTIME_h__
-#define __UTIME_h__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- *  POSIX 1003.1b 5.6.6 Set File Access and Modification Times
- */
-
-struct utimbuf {
-  time_t  actime;   /* Access time */
-  time_t  modtime;  /* Modification time */
-};
-
-/* Functions */
-
-int utime(
-  const char           *path,
-  const struct utimbuf *times
-);
-
-#ifdef __cplusplus
-};
-#endif
-
-#endif /* _SYS_UTIME_H */
diff --git a/newlib/libc/sys/sh/Makefile.am b/newlib/libc/sys/sh/Makefile.am
deleted file mode 100644
index 1fddc4cd2..000000000
--- a/newlib/libc/sys/sh/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.S creat.c ftruncate.c truncate.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sh/Makefile.in b/newlib/libc/sys/sh/Makefile.in
deleted file mode 100644
index 29a0b7a26..000000000
--- a/newlib/libc/sys/sh/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.S creat.c ftruncate.c truncate.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o trap.o creat.o ftruncate.o truncate.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sh/aclocal.m4 b/newlib/libc/sys/sh/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sh/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sh/configure b/newlib/libc/sys/sh/configure
deleted file mode 100755
index 4ab303d75..000000000
--- a/newlib/libc/sys/sh/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=creat.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sh/configure.in b/newlib/libc/sys/sh/configure.in
deleted file mode 100644
index 84e836394..000000000
--- a/newlib/libc/sys/sh/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sh configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(creat.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sh/creat.c b/newlib/libc/sys/sh/creat.c
deleted file mode 100644
index 62ec5ead8..000000000
--- a/newlib/libc/sys/sh/creat.c
+++ /dev/null
@@ -1,7 +0,0 @@
-int
-creat(path, mode)
-     const char *path;
-     int mode;
-{
-  return _creat (path, mode);
-}
diff --git a/newlib/libc/sys/sh/crt0.S b/newlib/libc/sys/sh/crt0.S
deleted file mode 100644
index e9f8dde94..000000000
--- a/newlib/libc/sys/sh/crt0.S
+++ /dev/null
@@ -1,115 +0,0 @@
-
-#ifdef __SH5__
-	.section .data,"aw"
-	.global ___data
-___data:
-
-	.section .rodata,"a"
-	.global ___rodata
-___rodata:
-
-#if __SH5__ == 64
-	.section .text,"ax"
-#define LOAD_ADDR(sym, reg) \
-	movi	(sym >> 48) & 65535, reg; \
-	shori	(sym >> 32) & 65535, reg; \
-	shori	(sym >> 16) & 65535, reg; \
-	shori	sym & 65535, reg
-#else
-	.mode	SHmedia
-	.section .text..SHmedia32,"ax"
-#define LOAD_ADDR(sym, reg) \
-	movi	(sym >> 16) & 65535, reg; \
-	shori	sym & 65535, reg
-#endif
-	.global start
-start:
-	LOAD_ADDR (_stack, r15)
-
-	pt/l	zero_bss_loop, tr0
-	pt/l	_atexit, tr1
-	pt/l	_init, tr5
-	pt/l	_main, tr6
-	pt/l	_exit, tr7
-
-	! zero out bss
-	LOAD_ADDR (_edata, r0)
-	LOAD_ADDR (_end, r1)
-zero_bss_loop:
-	stx.q	r0, r63, r63
-	addi	r0, 8, r0
-	bgt/l	r1, r0, tr0
-
-	LOAD_ADDR (___data, r26)
-	LOAD_ADDR (___rodata, r27)
-
-#if ! __SH4_NOFPU__
-	getcon	cr0, r0
-	movi	1, r1
-	shlli	r1, 15, r1
-	or	r1, r0, r0
-	putcon	r0, cr0
-#endif
-
-	! arrange for exit to call fini
-	LOAD_ADDR (_fini, r2)
-	blink	tr1, r18
-
-	! call init
-	blink	tr5, r18
-
-	! call the mainline
-	blink	tr6, r18
-
-	! call exit
-	blink	tr7, r18
-#else
-	.section .text
-	.global	start
-start:
-	mov.l	stack_k,r15
-
-	! zero out bss
-	mov.l	edata_k,r0
-	mov.l	end_k,r1
-	mov	#0,r2
-start_l:
-	 mov.l	r2,@r0
-	add	#4,r0
-	cmp/ge	r0,r1
-	bt	start_l
-
-#if defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY)
-	mov.l set_fpscr_k, r1
-	jsr @r1
-	mov #0,r4
-	lds r3,fpscr
-#endif /*  defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__) */
-
-	! call the mainline	
-	mov.l	main_k,r0
-	jsr	@r0
-	or	r0,r0
-
-	! call exit
-	mov	r0,r4
-	mov.l	exit_k,r0
-	jsr	@r0
-	or	r0,r0
-
-	.align 2
-#if defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__)
-set_fpscr_k:
-	.long	___set_fpscr
-#endif /*  defined (__SH3E__) || defined(__SH4_SINGLE__) || defined(__SH4__) || defined(SH4_SINGLE_ONLY) */
-stack_k:
-	.long	_stack	
-edata_k:
-	.long	_edata
-end_k:
-	.long	_end
-main_k:
-	.long	_main
-exit_k:
-	.long	_exit
-#endif
diff --git a/newlib/libc/sys/sh/ftruncate.c b/newlib/libc/sys/sh/ftruncate.c
deleted file mode 100644
index 660377bf3..000000000
--- a/newlib/libc/sys/sh/ftruncate.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include "sys/syscall.h"
-
-int
-ftruncate (int file, off_t length)
-{
-  return __trap34 (SYS_ftruncate, file, length, 0);
-}
diff --git a/newlib/libc/sys/sh/sys/syscall.h b/newlib/libc/sys/sh/sys/syscall.h
deleted file mode 100644
index 9ab32e7b7..000000000
--- a/newlib/libc/sys/sh/sys/syscall.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#define	SYS_exit	1
-#define	SYS_fork	2
-
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
-#define	SYS_stat	38
-
-#define	SYS_pipe	42
-#define	SYS_execve	59
-
-#define SYS_truncate	129
-#define SYS_ftruncate	130
-
-#define SYS_argc	172 /* == 0xAC, for Argument Count :-) */
-#define SYS_argnlen	173
-#define SYS_argn	174
-
-#define SYS_utime       201 /* not really a system call */
-#define SYS_wait        202 /* nor is this */
diff --git a/newlib/libc/sys/sh/syscalls.c b/newlib/libc/sys/sh/syscalls.c
deleted file mode 100644
index f0e924297..000000000
--- a/newlib/libc/sys/sh/syscalls.c
+++ /dev/null
@@ -1,221 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include "sys/syscall.h"
-int errno;
-
-/* This is used by _sbrk.  */
-register char *stack_ptr asm ("r15");
-
-int
-_read (int file,
-       char *ptr,
-       int len)
-{
-  return __trap34 (SYS_read, file, ptr, len);
-}
-
-int
-_lseek (int file,
-	int ptr,
-	int dir)
-{
-  return __trap34 (SYS_lseek, file, ptr, dir);
-}
-
-int
-_write ( int file,
-	 char *ptr,
-	 int len)
-{
-  return __trap34 (SYS_write, file, ptr, len);
-}
-
-int
-_close (int file)
-{
-  return __trap34 (SYS_close, file, 0, 0);
-}
-
-int
-_link (char *old, char *new)
-{
-  return -1;
-}
-
-caddr_t
-_sbrk (int incr)
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-
-  if (heap_end == 0)
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int
-_open (const char *path,
-	int flags)
-{
-  return __trap34 (SYS_open, path, flags, 0);
-}
-
-int
-_creat (const char *path,
-	int mode)
-{
-  return __trap34 (SYS_creat, path, mode, 0);
-}
-
-int
-_unlink ()
-{
-  return -1;
-}
-
-isatty (fd)
-     int fd;
-{
-  return 1;
-}
-
-_exit (n)
-{
-  return __trap34 (SYS_exit, n, 0, 0);
-}
-
-_kill (n, m)
-{
-  return __trap34 (SYS_exit, 0xdead, 0, 0);
-}
-
-_getpid (n)
-{
-  return 1;
-}
-
-_raise ()
-{
-}
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  return __trap34 (SYS_stat, path, st, 0);
-}
-
-int
-_chmod (const char *path, short mode)
-{
-  return __trap34 (SYS_chmod, path, mode);
-}
-
-int
-_chown (const char *path, short owner, short group)
-{
-  return __trap34 (SYS_chown, path, owner, group);
-}
-
-int
-_utime (path, times)
-     const char *path;
-     char *times;
-{
-  return __trap34 (SYS_utime, path, times);
-}
-
-int
-_fork ()
-{
-  return __trap34 (SYS_fork);
-}
-
-int
-_wait (statusp)
-     int *statusp;
-{
-  return __trap34 (SYS_wait);
-}
-
-int
-_execve (const char *path, char *const argv[], char *const envp[])
-{
-  return __trap34 (SYS_execve, path, argv, envp);
-}
-
-int
-_execv (const char *path, char *const argv[])
-{
-  return __trap34 (SYS_execv, path, argv);
-}
-
-int
-_pipe (int *fd)
-{
-  return __trap34 (SYS_pipe, fd);
-}
-
-/* This is only provided because _gettimeofday_r and _times_r are
-   defined in the same module, so we avoid a link error.  */
-clock_t
-_times (struct tms *tp)
-{
-  return -1;
-}
-
-int
-_gettimeofday (struct timeval *tv, struct timezone *tz)
-{
-  tv->tv_usec = 0;
-  tv->tv_sec = __trap34 (SYS_time);
-  return 0;
-}
-
-static inline int
-__setup_argv_for_main (int argc)
-{
-  char **argv;
-  int i = argc;
-
-  argv = __builtin_alloca ((1 + argc) * sizeof (*argv));
-
-  argv[i] = NULL;
-  while (i--) {
-    argv[i] = __builtin_alloca (1 + __trap34 (SYS_argnlen, i));
-    __trap34 (SYS_argn, i, argv[i]);
-  }
-
-  return main (argc, argv);
-}
-
-int
-__setup_argv_and_call_main ()
-{
-  int argc = __trap34 (SYS_argc);
-
-  if (argc <= 0)
-    return main (argc, NULL);
-  else
-    return __setup_argv_for_main (argc);
-}
diff --git a/newlib/libc/sys/sh/trap.S b/newlib/libc/sys/sh/trap.S
deleted file mode 100644
index 0eb6e5dfe..000000000
--- a/newlib/libc/sys/sh/trap.S
+++ /dev/null
@@ -1,43 +0,0 @@
-#if __SH5__
-	.mode	SHmedia
-#if __SH5__ == 32 && __SHMEDIA__
-	.section	.text..SHmedia32, "ax"
-#else
-	.text
-#endif
-	.global ___trap34
-___trap34:
-	movi	34, r0
-	trapa	r0
-	pt/l	ret, tr1
-	ptabs/l	r18, tr0
-	beqi	r1, 0, tr1
-#if __SH5__ == 64
-	movi	((_errno >> 48) & 65535), r0
-	shori	((_errno >> 32) & 65535), r0
-	shori	((_errno >> 16) & 65535), r0
-#else
-	movi	((_errno >> 16) & 65535), r0
-#endif
-	shori	(_errno & 65535), r0
-	stx.l	r0, r63, r1
-ret:
-	blink	tr0, r63
-	
-#else
-	.text
-	.global	___trap34
-___trap34:
-	trapa	#34
-	tst	r1,r1	! r1 is errno
-	bt	ret
-	mov.l	perrno,r2
-	mov.l	r1,@r2
-ret:
-	rts
-	nop
-	
-	.align	2
-perrno:
-	.long	_errno
-#endif /* ! __SH5__ */
diff --git a/newlib/libc/sys/sh/truncate.c b/newlib/libc/sys/sh/truncate.c
deleted file mode 100644
index 5ca48d3c6..000000000
--- a/newlib/libc/sys/sh/truncate.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include "sys/syscall.h"
-
-int
-truncate (const char *path, off_t length)
-{
-  return __trap34 (SYS_truncate, path, length, 0);
-}
diff --git a/newlib/libc/sys/sparc64/Makefile.am b/newlib/libc/sys/sparc64/Makefile.am
deleted file mode 100644
index 83f0d31b3..000000000
--- a/newlib/libc/sys/sparc64/Makefile.am
+++ /dev/null
@@ -1,119 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-# _r.o is for the reentrant syscall stubs.
-
-SUFFIXES = _r.o
-
-.S_r.o:
-	$(COMPILE) -DREENT -c $< -o $@
-
-.c_r.o:
-	$(COMPILE) -DREENT -c $< -o $@
-
-# We no longer copy files out of /lib/libc.a.  This is kept around until
-# most of them have replacements.
-#
-#COPYOFILES = \
-#	Ovfork.o _sigvec.o abort.o access.o chown.o creat.o \
-#	errlst.o getdents.o getdtablesize.o getpid.o \
-#	getrusage.o gettimeofday.o ieee_globals.o ioctl.o isatty.o \
-#	kill.o popen.o sbrk.o sigblock.o sigpause.o sigsetmask.o \
-#	sigtramp.o sigvec.o sleep.o setitimer.o start_float.o \
-#	time.o times.o utime.o utimes.o wait3.o
-COPYOFILES =
-
-# These files are from Sun's libc.a but must be renamed because they
-# conflict with other library .o's. They are renamed to xxxS.o.
-# div.o is used by times.o. errno.o conflicts with libc/errno/errno.o.
-#COPYRENAMEOFILES = divS.o errnoS.o
-COPYRENAMEOFILES =
-
-#COPYOMFILES = ieee_flags.o
-COPYOMFILES =
-
-# CFILES_R, SFILES_R, and TEMPLATE_SFILES_R define those system calls that are
-# needed by the ANSI C part of newlib (and thus we must provide namespace
-# clean versions of them because we define REENTRANT_SYSCALLS_PROVIDED).
-
-CFILES = _main.c ieee.c \
-	closedir.c opendir.c readdir.c rewinddir.c scandir.c seekdir.c \
-	telldir.c \
-	creat.c isatty.c utime2.c
-
-CFILES_R =
-
-SFILES = cerror.S crt0.S dup2.S execve.S _exit.S sigsetjmp.S utime.S
-
-SFILES_R = sbrk.S wait.S
-
-# List of files built from template.S (with an '_' suffix).
-
-TEMPLATE_SFILES = access_ chdir_ chmod_ chown_ dup_ fcntl_ \
-	lstat_ mkdir_ pipe_ rmdir_ times_ umask_ utimes_
-
-TEMPLATE_SFILES_R = close_ fork_ fstat_ getpid_ gettimeofday_ kill_ \
-	link_ lseek_ open_ read_ stat_ times_ unlink_ wait4_ write_
-
-OFILES = $(COPYOFILES) $(COPYRENAMEOFILES) $(COPYOMFILES) \
-	$(SFILES:.S=.o) $(SFILES_R:.S=.o) $(SFILES_R:.S=_r.o) \
-	$(TEMPLATE_SFILES:_=.o) $(TEMPLATE_SFILES_R:_=.o) $(TEMPLATE_SFILES_R:_=_r.o) \
-	$(CFILES:.c=.o) $(CFILES_R:.c=.o) $(CFILES_R:.c=_r.o)
-
-lib_a_SOURCES = $(SFILES) $(SFILES_R) $(CFILES) $(CFILES_R)
-lib_a_LIBADD = $(COPYOFILES) $(COPYRENAMEOFILES) $(COPYOMFILES) \
-	$(SFILES_R:.S=_r.o) \
-	$(TEMPLATE_SFILES:_=.o) $(TEMPLATE_SFILES_R:_=.o) \
-	$(TEMPLATE_SFILES_R:_=_r.o) \
-	$(CFILES_R:.c=_r.o)
-
-$(COPYOFILES):
-	$(AR) x /lib/libc.a $(COPYOFILES) 
-
-$(COPYRENAMEOFILES):
-	$(AR) x /lib/libc.a $(COPYRENAMEOFILES:S.o=.o) 
-	for f in $(COPYRENAMEOFILES); do mv `basename $$f S.o`.o $$f; done
-
-$(COPYOMFILES):
-	$(AR) x /lib/libm.a $(COPYOMFILES) 
-
-stamp-srcs: Makefile template.S template_r.S
-	for f in $(TEMPLATE_SFILES:_=);	do \
-	  $(COMPILE) -E -Dfunc=$$f $(srcdir)/template.S >$$f.S; \
-	done
-	for f in $(TEMPLATE_SFILES_R:_=); do \
-	  $(COMPILE) -E -Dfunc=$$f $(srcdir)/template_r.S | sed -e 's/^_/#/' >$$f.S; \
-	done
-	touch stamp-srcs
-
-# Make a dependency for each file built from a template.
-
-$(TEMPLATE_SFILES:_=.S) $(TEMPLATE_SFILES_R:_=.S): stamp-srcs
-
-all: crt0.o
-
-close_r.o: close.S
-fork_r.o: fork.S
-fstat_r.o: fstat.S
-getpid_r.o: getpid.S
-gettimeofday_r.o: gettimeofday.S
-kill_r.o: kill.S
-link_r.o: link.S
-lseek_r.o: lseek.S
-open_r.o: open.S
-read_r.o: read.S
-sbrk_r.o: sbrk.S
-stat_r.o: stat.S
-times_r.o: times.S
-unlink_r.o: unlink.S
-wait_r.o: wait.S
-wait4_r.o: wait4.S
-write_r.o: write.S
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sparc64/Makefile.in b/newlib/libc/sys/sparc64/Makefile.in
deleted file mode 100644
index 9b3583c8a..000000000
--- a/newlib/libc/sys/sparc64/Makefile.in
+++ /dev/null
@@ -1,447 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-# _r.o is for the reentrant syscall stubs.
-
-SUFFIXES = _r.o
-
-# We no longer copy files out of /lib/libc.a.  This is kept around until
-# most of them have replacements.
-#
-#COPYOFILES = \
-#	Ovfork.o _sigvec.o abort.o access.o chown.o creat.o \
-#	errlst.o getdents.o getdtablesize.o getpid.o \
-#	getrusage.o gettimeofday.o ieee_globals.o ioctl.o isatty.o \
-#	kill.o popen.o sbrk.o sigblock.o sigpause.o sigsetmask.o \
-#	sigtramp.o sigvec.o sleep.o setitimer.o start_float.o \
-#	time.o times.o utime.o utimes.o wait3.o
-COPYOFILES = 
-
-# These files are from Sun's libc.a but must be renamed because they
-# conflict with other library .o's. They are renamed to xxxS.o.
-# div.o is used by times.o. errno.o conflicts with libc/errno/errno.o.
-#COPYRENAMEOFILES = divS.o errnoS.o
-COPYRENAMEOFILES = 
-
-#COPYOMFILES = ieee_flags.o
-COPYOMFILES = 
-
-# CFILES_R, SFILES_R, and TEMPLATE_SFILES_R define those system calls that are
-# needed by the ANSI C part of newlib (and thus we must provide namespace
-# clean versions of them because we define REENTRANT_SYSCALLS_PROVIDED).
-
-CFILES = _main.c ieee.c \
-	closedir.c opendir.c readdir.c rewinddir.c scandir.c seekdir.c \
-	telldir.c \
-	creat.c isatty.c utime2.c
-
-
-CFILES_R = 
-
-SFILES = cerror.S crt0.S dup2.S execve.S _exit.S sigsetjmp.S utime.S
-
-SFILES_R = sbrk.S wait.S
-
-# List of files built from template.S (with an '_' suffix).
-
-TEMPLATE_SFILES = access_ chdir_ chmod_ chown_ dup_ fcntl_ \
-	lstat_ mkdir_ pipe_ rmdir_ times_ umask_ utimes_
-
-
-TEMPLATE_SFILES_R = close_ fork_ fstat_ getpid_ gettimeofday_ kill_ \
-	link_ lseek_ open_ read_ stat_ times_ unlink_ wait4_ write_
-
-
-OFILES = $(COPYOFILES) $(COPYRENAMEOFILES) $(COPYOMFILES) \
-	$(SFILES:.S=.o) $(SFILES_R:.S=.o) $(SFILES_R:.S=_r.o) \
-	$(TEMPLATE_SFILES:_=.o) $(TEMPLATE_SFILES_R:_=.o) $(TEMPLATE_SFILES_R:_=_r.o) \
-	$(CFILES:.c=.o) $(CFILES_R:.c=.o) $(CFILES_R:.c=_r.o)
-
-
-lib_a_SOURCES = $(SFILES) $(SFILES_R) $(CFILES) $(CFILES_R)
-lib_a_LIBADD = $(COPYOFILES) $(COPYRENAMEOFILES) $(COPYOMFILES) \
-	$(SFILES_R:.S=_r.o) \
-	$(TEMPLATE_SFILES:_=.o) $(TEMPLATE_SFILES_R:_=.o) \
-	$(TEMPLATE_SFILES_R:_=_r.o) \
-	$(CFILES_R:.c=_r.o)
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_DEPENDENCIES =  sbrk_r.o wait_r.o access.o chdir.o chmod.o chown.o \
-dup.o fcntl.o lstat.o mkdir.o pipe.o rmdir.o times.o umask.o utimes.o \
-close.o fork.o fstat.o getpid.o gettimeofday.o kill.o link.o lseek.o \
-open.o read.o stat.o times.o unlink.o wait4.o write.o close_r.o \
-fork_r.o fstat_r.o getpid_r.o gettimeofday_r.o kill_r.o link_r.o \
-lseek_r.o open_r.o read_r.o stat_r.o times_r.o unlink_r.o wait4_r.o \
-write_r.o
-lib_a_OBJECTS =  cerror.o crt0.o dup2.o execve.o _exit.o sigsetjmp.o \
-utime.o sbrk.o wait.o _main.o ieee.o closedir.o opendir.o readdir.o \
-rewinddir.o scandir.o seekdir.o telldir.o creat.o isatty.o utime2.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s _r.o
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-.S_r.o:
-	$(COMPILE) -DREENT -c $< -o $@
-
-.c_r.o:
-	$(COMPILE) -DREENT -c $< -o $@
-
-$(COPYOFILES):
-	$(AR) x /lib/libc.a $(COPYOFILES) 
-
-$(COPYRENAMEOFILES):
-	$(AR) x /lib/libc.a $(COPYRENAMEOFILES:S.o=.o) 
-	for f in $(COPYRENAMEOFILES); do mv `basename $$f S.o`.o $$f; done
-
-$(COPYOMFILES):
-	$(AR) x /lib/libm.a $(COPYOMFILES) 
-
-stamp-srcs: Makefile template.S template_r.S
-	for f in $(TEMPLATE_SFILES:_=);	do \
-	  $(COMPILE) -E -Dfunc=$$f $(srcdir)/template.S >$$f.S; \
-	done
-	for f in $(TEMPLATE_SFILES_R:_=); do \
-	  $(COMPILE) -E -Dfunc=$$f $(srcdir)/template_r.S | sed -e 's/^_/#/' >$$f.S; \
-	done
-	touch stamp-srcs
-
-# Make a dependency for each file built from a template.
-
-$(TEMPLATE_SFILES:_=.S) $(TEMPLATE_SFILES_R:_=.S): stamp-srcs
-
-all: crt0.o
-
-close_r.o: close.S
-fork_r.o: fork.S
-fstat_r.o: fstat.S
-getpid_r.o: getpid.S
-gettimeofday_r.o: gettimeofday.S
-kill_r.o: kill.S
-link_r.o: link.S
-lseek_r.o: lseek.S
-open_r.o: open.S
-read_r.o: read.S
-sbrk_r.o: sbrk.S
-stat_r.o: stat.S
-times_r.o: times.S
-unlink_r.o: unlink.S
-wait_r.o: wait.S
-wait4_r.o: wait4.S
-write_r.o: write.S
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sparc64/_exit.S b/newlib/libc/sys/sparc64/_exit.S
deleted file mode 100644
index 174f72165..000000000
--- a/newlib/libc/sys/sparc64/_exit.S
+++ /dev/null
@@ -1,14 +0,0 @@
-! _exit() system call
-
-#include "sys/syscallasm.h"
-
-	TEXT_SECTION
-	ALIGN (4)
-	GLOBAL (ASM_SYMBOL (_exit))
-ASM_SYMBOL (_exit):
-	mov	SYS_exit,%g1
-	ta	%icc,SYSCALL_TRAP
-
-! If that returns (yikes!), try an illegal insn ...
-
-	WORD (0)
\ No newline at end of file
diff --git a/newlib/libc/sys/sparc64/_main.c b/newlib/libc/sys/sparc64/_main.c
deleted file mode 100644
index 64878088d..000000000
--- a/newlib/libc/sys/sparc64/_main.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-__main()
-{
-  
-
-}
diff --git a/newlib/libc/sys/sparc64/aclocal.m4 b/newlib/libc/sys/sparc64/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sparc64/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sparc64/cerror.S b/newlib/libc/sys/sparc64/cerror.S
deleted file mode 100644
index c29563fef..000000000
--- a/newlib/libc/sys/sparc64/cerror.S
+++ /dev/null
@@ -1,29 +0,0 @@
-! Set errno.
-! This function is called by all the syscall stubs.
-!
-! FIXME: We assume errno is the first member of struct _reent.
-! Not sure what to do about this.
-
-#include <sys/syscallasm.h>
-
-	DATA_SECTION
-	ALIGN (4)
-	GLOBAL (ASM_SYMBOL (errno))	! FIXME: ASM_PRIVATE_SYMBOL ?
-ASM_SYMBOL (errno):
-	WORD (0)
-
-	TEXT_SECTION
-	ALIGN (4)
-
-	GLOBAL (ASM_PRIVATE_SYMBOL (cerror))
-ASM_PRIVATE_SYMBOL (cerror):
-	sethi	%hi (ASM_SYMBOL (errno)),%g1
-	stw	%o0,[%g1+%lo (ASM_SYMBOL (errno))]
-	jmpl	%o7+8,%g0
-	mov	-1,%o0
-
-	GLOBAL (ASM_PRIVATE_SYMBOL (cerror_r))
-ASM_PRIVATE_SYMBOL (cerror_r):
-	stw	%o0,[%o1]
-	jmpl	%o7+8,%g0
-	mov	-1,%o0
diff --git a/newlib/libc/sys/sparc64/closedir.c b/newlib/libc/sys/sparc64/closedir.c
deleted file mode 100644
index d87d81654..000000000
--- a/newlib/libc/sys/sparc64/closedir.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)closedir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * close a directory.
- */
-int
-closedir(dirp)
-	register DIR *dirp;
-{
-	int fd;
-
-	fd = dirp->dd_fd;
-	dirp->dd_fd = -1;
-	dirp->dd_loc = 0;
-	(void)free((void *)dirp->dd_buf);
-	(void)free((void *)dirp);
-	return(close(fd));
-}
diff --git a/newlib/libc/sys/sparc64/configure b/newlib/libc/sys/sparc64/configure
deleted file mode 100755
index c2d3ed6d8..000000000
--- a/newlib/libc/sys/sparc64/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=template_r.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sparc64/configure.in b/newlib/libc/sys/sparc64/configure.in
deleted file mode 100644
index c434b2244..000000000
--- a/newlib/libc/sys/sparc64/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sparc64 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(template_r.S)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sparc64/creat.c b/newlib/libc/sys/sparc64/creat.c
deleted file mode 100644
index 6b1116206..000000000
--- a/newlib/libc/sys/sparc64/creat.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* creat() "system call" */
-
-/* This is needed by f2c and therefore the SPEC benchmarks.  */
-
-#include <fcntl.h>
-
-int
-creat (const char *path, mode_t mode)
-{
-  return open (path, O_WRONLY | O_CREAT | O_TRUNC, mode);
-}
diff --git a/newlib/libc/sys/sparc64/crt0.S b/newlib/libc/sys/sparc64/crt0.S
deleted file mode 100644
index ed2cb7e93..000000000
--- a/newlib/libc/sys/sparc64/crt0.S
+++ /dev/null
@@ -1,123 +0,0 @@
-! C run time start off
-
-! This file supports:
-!
-! - both 32bit pointer and 64bit pointer environments (at compile time)
-! - an imposed stack bias (of 2047) (at run time)
-! - medium/low and medium/anywhere code models (at run time)
-
-! Initial stack setup:
-!
-!    bottom of stack (higher memory address)
-! 	...
-!	text of environment strings
-!	text of argument strings
-!	envp[envc] = 0 (4/8 bytes)
-!	...
-!	env[0] (4/8 bytes)
-!	argv[argc] = 0 (4/8 bytes)
-!	...
-!	argv[0] (4/8 bytes)
-!	argc (4/8 bytes)
-!	register save area (64 bits by 16 registers = 128 bytes)
-!	top of stack (%sp)
-
-! Stack Bias:
-!
-! It is the responsibility of the o/s to set this up.
-! We handle both a 0 and 2047 value for the stack bias.
-
-! Medium/Anywhere code model support:
-!
-! In this model %g4 points to the start of the data segment.
-! The text segment can go anywhere, but %g4 points to the *data* segment.
-! It is up to the compiler/linker to get this right.
-!
-! Since this model is statically linked the start of the data segment
-! is known at link time.  Eg:
-!
-!	sethi	%hh(data_start), %g1
-!	sethi	%lm(data_start), %g4
-!	or	%g1, %hm(data_start), %g1
-!	or	%g4, %lo(data_start), %g4
-!	sllx	%g1, 32, %g1
-!	or	%g4, %g1, %g4
-!
-! FIXME: For now we just assume 0.
-
-! FIXME: if %g1 contains a non-zero value, atexit() should be invoked
-! with this value.
-
-#include <sys/syscallasm.h>
-
-	TEXT_SECTION
-	ALIGN (4)
-	GLOBAL (ASM_PRIVATE_SYMBOL (start))
-ASM_PRIVATE_SYMBOL (start):
-	clr	%fp
-
-! We use %g4 even if the code model is Medium/Low (simplifies the code).
-
-	clr	%g4			! Medium/Anywhere base reg
-
-! If there is a stack bias in effect, account for it in %g5.  Then always
-! add %g5 to stack references below.  This way the code can be used with
-! or without an imposed bias.
-
-	andcc	%sp, 1, %g5
-	bnz,a	.LHaveBias
-	mov	2047, %g5
-.LHaveBias:
-	add	%sp, %g5, %sp
-
-#if TARGET_PTR_SIZE == 32
-	! FIXME: We apparently assume here that there is no reserved word.
-	! This is probably correct, but try to verify it.
-	ld	[%sp + 0x80], %o0	! argc
-	add	%sp, 0x84, %o1		! argv
-	add	%o0, 1, %o2
-	sll	%o2, 2, %o2
-#else /* TARGET_PTR_SIZE == 64 */
-	ld	[%sp + 0x8c], %o0	! argc.lo
-	add	%sp, 0x90, %o1		! argv
-	add	%o0, 1, %o2
-	sll	%o2, 3, %o2
-#endif
-	add	%o1, %o2, %o2		! envp
-	sethi	%hi (ASM_SYMBOL (environ)), %o3
-	or	%o3, %lo (ASM_SYMBOL (environ)), %o3
-#if TARGET_PTR_SIZE == 32
-	st	%o2, [%o3 + %g4]
-#else /* TARGET_PTR_SIZE == 64 */
-	stx	%o2, [%o3 + %g4]
-#endif
-
-! Restore any stack bias before we call main() ...
-
-	sub	%sp, %g5, %sp
-
-	GLOBAL (ASM_SYMBOL (main))
-	call	ASM_SYMBOL (main)
-
-! FIXME: Not sure if this is needed anymore.
-#if TARGET_PTR_SIZE == 32
-	sub	%sp, 0x20, %sp		! room to push args
-#else /* TARGET_PTR_SIZE == 64 */
-	sub	%sp, 0x30, %sp		! room to push args
-#endif
-
-	GLOBAL (ASM_SYMBOL (exit))
-	call	ASM_SYMBOL (exit)
-	nop
-
-	GLOBAL (ASM_SYMBOL (_exit))
-	call	ASM_SYMBOL (_exit)
-	nop
-
-	set	SYS_exit, %g1
-	ta	SYSCALL_TRAP		! in case user redefines __exit
-
-! If all the above methods fail to terminate the program, try an illegal insn.
-! If that does not work, the o/s is hosed more than we are.
-
-	WORD (0)
diff --git a/newlib/libc/sys/sparc64/dup2.S b/newlib/libc/sys/sparc64/dup2.S
deleted file mode 100644
index f46fb703e..000000000
--- a/newlib/libc/sys/sparc64/dup2.S
+++ /dev/null
@@ -1,9 +0,0 @@
-! dup2() system call
-
-#include "sys/syscallasm.h"
-
-/* FIXME: rewrite in C to use fcntl */
-
-#ifndef __svr4__	/* svr4 uses fcntl */
-	defsyscall (dup2, SYS_dup2)
-#endif
diff --git a/newlib/libc/sys/sparc64/execve.S b/newlib/libc/sys/sparc64/execve.S
deleted file mode 100644
index 804d2ee3c..000000000
--- a/newlib/libc/sys/sparc64/execve.S
+++ /dev/null
@@ -1,27 +0,0 @@
-! execve.S
-! This function is invoked by the other exec*() fns.
-!
-! If sizeof(char *) == 64, we invoke a new Shade function until the real one
-! is defined.
-
-#include "sys/syscallasm.h"
-
-	TEXT_SECTION
-	ALIGN (4)
-	GLOBAL (ASM_SYMBOL (execve))
-ASM_SYMBOL (execve):
-	mov	SYS_execve,%g1
-#if TARGET_PTR_SIZE == 64
-	ta	42
-#else
-	ta	SYSCALL_TRAP
-#endif
-
-	bcc	noerr
-	nop
-
-	seterrno()
-
-noerr:
-	jmpl	%o7+8,%g0
-	nop
diff --git a/newlib/libc/sys/sparc64/ieee.c b/newlib/libc/sys/sparc64/ieee.c
deleted file mode 100644
index 28289761d..000000000
--- a/newlib/libc/sys/sparc64/ieee.c
+++ /dev/null
@@ -1,115 +0,0 @@
-
-#include <ieeefp.h>
-
-
-fp_rnd
-_DEFUN_VOID(fpgetround)
-{
-  char *out;
-  ieee_flags("get", "direction","", &out);
-  if (strcmp(out,"nearest") == 0) return FP_RN;  
-  if (strcmp(out,"negative") == 0) return FP_RM;  
-  if (strcmp(out,"positive") == 0) return FP_RP;  
-  if (strcmp(out,"tozero") == 0) return FP_RZ;  
-  abort();
-  
-}
-
-fp_rnd
-_DEFUN(fpsetround,(new),
-       fp_rnd new)
-{
-  fp_rnd old = fpgetround();
-  char *dummy;
-  
-  switch (new) 
-  {
-  case FP_RN:
-    ieee_flags("set", "direction", "nearest", &dummy);
-    break;
-  case FP_RM:
-    ieee_flags("set", "direction", "negative", &dummy);
-    break;
-  case FP_RP:
-    ieee_flags("set", "direction", "positive", &dummy);
-    break;
-  case FP_RZ:
-    ieee_flags("set", "direction", "tozero", &dummy);
-    break;
-  default:
-    break;
-  }
-  return old;
-}
-
-
-fp_except
-_DEFUN_VOID(fpgetmask)
-{
-  char *out;
-  int r = 0;
-
-  int i = ieee_flags("get","exception","",&out);  
-  if (i & 1) r |= FP_X_IMP;
-  if (i & 2) r |= FP_X_DX;
-  if (i & 4) r |= FP_X_UFL;
-  if (i & 8) r |= FP_X_OFL;
-  if (i & 16) r |= FP_X_INV;
-  return r;
-
-}
-
-fp_except
-_DEFUN(fpsetmask,(mask),
-       fp_except mask)
-{
-  fp_except old = fpgetmask();  
-
-  char *out;
-  ieee_flags("clear","exception", "all", &out);
-
-
-  if (mask & FP_X_IMP) 
-   ieee_flags("set","exception","inexact", &out);
-  if (mask  & FP_X_DX)
-   ieee_flags("set","exception","division", &out);
-  if (mask & FP_X_UFL)
-   ieee_flags("set","exception","underflow", &out);
-  if (mask & FP_X_OFL)
-   ieee_flags("set","exception","overflow", &out);
-  if (mask & FP_X_INV)
-   ieee_flags("set","exception","invalid", &out);
-
-  return old;
-
-}
-
-fp_except 
-_DEFUN(fpsetsticky,(mask),
-       fp_except mask)
-{
-  return fpsetmask(mask);
-}
-
-fp_except
-_DEFUN_VOID(fpgetsticky)
-{
-  return fpgetmask();
-}
-
-int
-_DEFUN(fpsetroundtoi,(rdi_mode),
-       fp_rdi rdi_mode)
-{
-  
-  return 0;
-  
-}
-
-int 
-_DEFUN_VOID(fpgetroundtoi)
-{
-  
-  return 0;
-  
-}
diff --git a/newlib/libc/sys/sparc64/isatty.c b/newlib/libc/sys/sparc64/isatty.c
deleted file mode 100644
index 3c64647a9..000000000
--- a/newlib/libc/sys/sparc64/isatty.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* isatty.c */
-
-/* Dumb implementation so programs will at least run.  */
-
-#include <sys/stat.h>
-
-int
-isatty (int fd)
-{
-  struct stat buf;
-
-  if (fstat (fd, &buf) < 0)
-    return 0;
-  if (S_ISCHR (buf.st_mode))
-    return 1;
-  return 0;
-}
diff --git a/newlib/libc/sys/sparc64/lstat.S b/newlib/libc/sys/sparc64/lstat.S
deleted file mode 100644
index 381330d17..000000000
--- a/newlib/libc/sys/sparc64/lstat.S
+++ /dev/null
@@ -1,5 +0,0 @@
-! lstat() system call
-
-#include "sys/syscallasm.h"
-
-	defsyscall (lstat, SYS_lstat)
diff --git a/newlib/libc/sys/sparc64/opendir.c b/newlib/libc/sys/sparc64/opendir.c
deleted file mode 100644
index ce080e312..000000000
--- a/newlib/libc/sys/sparc64/opendir.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)opendir.c	5.11 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * open a directory.
- */
-DIR *
-opendir(name)
-	const char *name;
-{
-	register DIR *dirp;
-	register int fd;
-
-	if ((fd = open(name, 0)) == -1)
-		return NULL;
-	if (fcntl(fd, F_SETFD, 1) == -1 ||
-	    (dirp = (DIR *)malloc(sizeof(DIR))) == NULL) {
-		close (fd);
-		return NULL;
-	}
-	/*
-	 * If CLSIZE is an exact multiple of DIRBLKSIZ, use a CLSIZE
-	 * buffer that it cluster boundary aligned.
-	 * Hopefully this can be a big win someday by allowing page trades
-	 * to user space to be done by getdirentries()
-	 */
-	dirp->dd_buf = malloc (512);
-	dirp->dd_len = 512;
-
-	if (dirp->dd_buf == NULL) {
-		close (fd);
-		return NULL;
-	}
-	dirp->dd_fd = fd;
-	dirp->dd_loc = 0;
-	dirp->dd_seek = 0;
-	/*
-	 * Set up seek point for rewinddir.
-	 */
-	return dirp;
-}
diff --git a/newlib/libc/sys/sparc64/readdir.c b/newlib/libc/sys/sparc64/readdir.c
deleted file mode 100644
index b3839870c..000000000
--- a/newlib/libc/sys/sparc64/readdir.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)readdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-
-/*
- * get next entry in a directory.
- */
-struct dirent *
-readdir(dirp)
-register DIR *dirp; {
-  register struct dirent *dp;
-  
-  for (;;) {
-    if (dirp->dd_loc == 0) {
-      dirp->dd_size = getdents (dirp->dd_fd,
-				dirp->dd_buf,
-				dirp->dd_len);
-      
-      if (dirp->dd_size <= 0)
-	return NULL;
-    }
-    if (dirp->dd_loc >= dirp->dd_size) {
-      dirp->dd_loc = 0;
-      continue;
-    }
-    dp = (struct dirent *)(dirp->dd_buf + dirp->dd_loc);
-    if ((int)dp & 03)	/* bogus pointer check */
-      return NULL;
-    if (dp->d_reclen <= 0 ||
-	dp->d_reclen > dirp->dd_len + 1 - dirp->dd_loc)
-      return NULL;
-    dirp->dd_loc += dp->d_reclen;
-    if (dp->d_ino == 0)
-      continue;
-    return (dp);
-  }
-}
diff --git a/newlib/libc/sys/sparc64/rewinddir.c b/newlib/libc/sys/sparc64/rewinddir.c
deleted file mode 100644
index d52c013c4..000000000
--- a/newlib/libc/sys/sparc64/rewinddir.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)rewinddir.c	5.1 (Berkeley) 5/25/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-
-void
-rewinddir(dirp)
-	DIR *dirp;
-{
-	extern long _rewinddir;
-
-	_seekdir((dirp), _rewinddir);
-	_rewinddir = telldir(dirp);
-}
diff --git a/newlib/libc/sys/sparc64/sbrk.S b/newlib/libc/sys/sparc64/sbrk.S
deleted file mode 100644
index bff72fa81..000000000
--- a/newlib/libc/sys/sparc64/sbrk.S
+++ /dev/null
@@ -1,78 +0,0 @@
-! sbrk() system call
-
-#include "sys/syscallasm.h"
-
-	DATA_SECTION
-	ALIGN (4)
-
-! CURBRK contains the current top of allocated space.
-! END is a private symbol in svr4, but a public one in sunos4.
-! FIXME: CURBRK is 4 bytes for now.
-
-
-	GLOBAL (ASM_PRIVATE_SYMBOL (curbrk))
-ASM_PRIVATE_SYMBOL (curbrk):
-#ifdef __svr4__
-	WORD (ASM_PRIVATE_SYMBOL (end))
-#else
-	WORD (ASM_SYMBOL (end))
-#endif
-
-	TEXT_SECTION
-	ALIGN (4)
-#ifdef REENT
-	GLOBAL (ASM_SYMBOL (_sbrk_r))
-ASM_SYMBOL (_sbrk_r):
-	mov	%o0,%o5
-	mov	%o1,%o0
-#else
-	GLOBAL (ASM_SYMBOL (sbrk))
-ASM_SYMBOL (sbrk):
-#endif
-	add	%o0,7,%o0
-	andn	%o0,7,%o0
-	sethi	%hi (ASM_PRIVATE_SYMBOL (curbrk)),%o2
-	lduw	[%o2+%lo (ASM_PRIVATE_SYMBOL (curbrk))],%o3
-	add	%o3,7,%o3
-	andn	%o3,7,%o3
-	add	%o3,%o0,%o0
-	mov	%o0,%o4
-	mov	SYS_brk,%g1
-	ta	SYSCALL_TRAP
-	bcs	err
-	nop
-	stw	%o4,[%o2+%lo (ASM_PRIVATE_SYMBOL (curbrk))]
-	jmpl	%o7+8,%g0
-	mov	%o3,%o0
-
-#ifdef REENT
-	GLOBAL (ASM_SYMBOL (_brk_r))
-ASM_SYMBOL (_brk_r):
-	mov	%o0,%o5
-	mov	%o1,%o0
-#else
-	GLOBAL (ASM_SYMBOL (brk))
-ASM_SYMBOL (brk):
-#endif
-	add	%o0,7,%o0
-	andn	%o0,7,%o0
-	mov	%o0,%o2
-	mov	SYS_brk,%g1
-	ta	SYSCALL_TRAP
-	bcs	err
-	nop
-	sethi	%hi (ASM_PRIVATE_SYMBOL (curbrk)),%o3
-	st	%o2,[%o3+%lo (ASM_PRIVATE_SYMBOL (curbrk))]
-	retl
-	mov	%g0,%o0
-
-err:
-#ifdef REENT
-	sethi	%hi (ASM_PRIVATE_SYMBOL (cerror_r)),%g1
-	or	%g1,%lo (ASM_PRIVATE_SYMBOL (cerror_r)),%g1
-#else
-	sethi	%hi (ASM_PRIVATE_SYMBOL (cerror)),%g1
-	or	%g1,%lo (ASM_PRIVATE_SYMBOL (cerror)),%g1
-#endif
-	jmpl	%g1,%g0
-	mov	%o5,%o1
diff --git a/newlib/libc/sys/sparc64/scandir.c b/newlib/libc/sys/sparc64/scandir.c
deleted file mode 100644
index bcfd525c4..000000000
--- a/newlib/libc/sys/sparc64/scandir.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)scandir.c	5.10 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Scan the directory dirname calling select to make a list of selected
- * directory entries then sort using qsort and compare routine dcomp.
- * Returns the number of entries and a pointer to a list of pointers to
- * struct dirent (through namelist). Returns -1 if there were any errors.
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*
- * The DIRSIZ macro gives the minimum record length which will hold
- * the directory entry.  This requires the amount of space in struct dirent
- * without the d_name field, plus enough space for the name with a terminating
- * null byte (dp->d_namlen+1), rounded up to a 4 byte boundary.
- */
-#undef DIRSIZ
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent) - (MAXNAMLEN+1)) + (((dp)->d_namlen+1 + 3) &~ 3))
-
-#ifndef __P
-#define __P(args) ()
-#endif
-
-int
-scandir(dirname, namelist, select, dcomp)
-	const char *dirname;
-	struct dirent ***namelist;
-	int (*select) __P((struct dirent *));
-	int (*dcomp) __P((const void *, const void *));
-{
-	register struct dirent *d, *p, **names;
-	register size_t nitems;
-	struct stat stb;
-	long arraysz;
-	DIR *dirp;
-
-	if ((dirp = opendir(dirname)) == NULL)
-		return(-1);
-	if (fstat(dirp->dd_fd, &stb) < 0)
-		return(-1);
-
-	/*
-	 * estimate the array size by taking the size of the directory file
-	 * and dividing it by a multiple of the minimum size entry. 
-	 */
-	arraysz = (stb.st_size / 24);
-	names = (struct dirent **)malloc(arraysz * sizeof(struct dirent *));
-	if (names == NULL)
-		return(-1);
-
-	nitems = 0;
-	while ((d = readdir(dirp)) != NULL) {
-		if (select != NULL && !(*select)(d))
-			continue;	/* just selected names */
-		/*
-		 * Make a minimum size copy of the data
-		 */
-		p = (struct dirent *)malloc(DIRSIZ(d));
-		if (p == NULL)
-			return(-1);
-		p->d_ino = d->d_ino;
-		p->d_reclen = d->d_reclen;
-		p->d_namlen = d->d_namlen;
-		bcopy(d->d_name, p->d_name, p->d_namlen + 1);
-		/*
-		 * Check to make sure the array has space left and
-		 * realloc the maximum size.
-		 */
-		if (++nitems >= arraysz) {
-			if (fstat(dirp->dd_fd, &stb) < 0)
-				return(-1);	/* just might have grown */
-			arraysz = stb.st_size / 12;
-			names = (struct dirent **)realloc((char *)names,
-				arraysz * sizeof(struct dirent *));
-			if (names == NULL)
-				return(-1);
-		}
-		names[nitems-1] = p;
-	}
-	closedir(dirp);
-	if (nitems && dcomp != NULL)
-		qsort(names, nitems, sizeof(struct dirent *), dcomp);
-	*namelist = names;
-	return(nitems);
-}
-
-/*
- * Alphabetic order comparison routine for those who want it.
- */
-int
-alphasort(d1, d2)
-	const void *d1;
-	const void *d2;
-{
-	return(strcmp((*(struct dirent **)d1)->d_name,
-	    (*(struct dirent **)d2)->d_name));
-}
diff --git a/newlib/libc/sys/sparc64/seekdir.c b/newlib/libc/sys/sparc64/seekdir.c
deleted file mode 100644
index 50331402a..000000000
--- a/newlib/libc/sys/sparc64/seekdir.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)seekdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-
-/*
- * Seek to an entry in a directory.
- * _seekdir is in telldir.c so that it can share opaque data structures.
- */
-void
-seekdir(dirp, loc)
-	DIR *dirp;
-	long loc;
-{
-
-	_seekdir(dirp, loc);
-}
diff --git a/newlib/libc/sys/sparc64/sigsetjmp.S b/newlib/libc/sys/sparc64/sigsetjmp.S
deleted file mode 100644
index 7751e5f8c..000000000
--- a/newlib/libc/sys/sparc64/sigsetjmp.S
+++ /dev/null
@@ -1,77 +0,0 @@
-! This file is called sigsetjmp.s because that is what V8 uses.
-! We do not define sigsetjmp() or setlongjmp() yet.
-! Solaris has setjmp/longjmp in setjmp.o.  Move this stuff there.
-
-#include <sys/syscallasm.h>
-
-	TEXT_SECTION
-	ALIGN (4)
-
-#ifdef __svr4__
-
-	GLOBAL (ASM_SYMBOL (setjmp))
-	.proc	04
-ASM_SYMBOL (setjmp):
-
-	clr	[%o0]
-	stx	%sp,[%o0+8]
-	add	%o7,8,%g1
-	stx	%g1,[%o0+16]
-	retl 
-	mov	%g0,%o0
-
-	GLOBAL (ASM_SYMBOL (longjmp))
-	.proc	04
-ASM_SYMBOL (longjmp):
-
-	flushw				! flush register windows
-	sub	%sp,136,%sp
-	ldx	[%o0+8],%fp
-	ldx	[%o0+16],%g1
-	tst	%o1
-	bne	L0
-	sub	%g1,8,%o7
-	mov	1,%o1
-L0:
-	retl 
-	restore	%o1,0,%o0
-
-#else
-
-	GLOBAL (ASM_SYMBOL (setjmp))
-	.proc	04
-ASM_SYMBOL (setjmp):
-	save	%sp,-136,%sp
-	or	%g0,%g0,%o0		! %o0 = 0
-	or	%g0,0x6d,%g1		! %g1 = 0x6d (syscall number)
-	ta	SYSCALL_TRAP
-	stw	%o0,[%i0+4]		! save result at [%i0+4] (sigmask?)
-	add	%fp,-8,%o1		! %o1 -> tmp 8 byte buffer
-	or	%g0,%g0,%o0		! %o0 = 0
-	or	%g0,0x70,%g1		! %g1 = 0x70 (syscall number)
-	ta	SYSCALL_TRAP
-	lduw	[%fp-4],%g1		! %g1 = onsstack?
-	stw	%fp,[%i0+8]		! save %fp at [%i0+8]
-	stw	%g1,[%i0+0]		! save ? at [%i0+8]
-	add	%i7,8,%g1		! %g1 = return address
-	stw	%g1,[%i0+12]		! save return address at [%i0+12]
-	add	%g1,4,%g1		! %g1 = nPC
-	stw	%g1,[%i0+16]		! save nPC at [%i0+16]
-	stw	%g0,[%i0+20]
-	stw	%g0,[%i0+24]
-	stw	%g0,[%i0+32]
-	jmpl	%i7+8,%g0
-	restore	%g0,0,%o0
-
-	GLOBAL (ASM_SYMBOL (longjmp))
-	.proc	04
-ASM_SYMBOL (longjmp):
-	orcc	%g0,%o1,%g0		! return val == 0 ?
-	be,a	L1			! branch if 0
-	or	%g0,1,%o1		! make it 1 (executed if branch taken)
-L1:
-	or	%g0,0x8b,%g1		! set syscall 0x8b
-	stw	%o1,[%o0+28]		! save return val for restoration
-	ta	SYSCALL_TRAP
-
-#endif /* ! __svr4__ */
diff --git a/newlib/libc/sys/sparc64/stat.S b/newlib/libc/sys/sparc64/stat.S
deleted file mode 100644
index 32adb23ce..000000000
--- a/newlib/libc/sys/sparc64/stat.S
+++ /dev/null
@@ -1,9 +0,0 @@
-! stat() system call
-
-#include "sys/syscallasm.h"
-
-#ifdef REENT
-	defsyscall_r (_stat_r, SYS_stat, 2)
-#else
-	defsyscall (stat, SYS_stat)
-#endif
diff --git a/newlib/libc/sys/sparc64/sys/dirent.h b/newlib/libc/sys/sparc64/sys/dirent.h
deleted file mode 100644
index 864bb5ca1..000000000
--- a/newlib/libc/sys/sparc64/sys/dirent.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _SYS_DIRENT_H
-# define _SYS_DIRENT_H
-
-/*
- * This file was written to be compatible with the BSD directory
- * routines, so it looks like it.  But it was written from scratch.
- * Sean Eric Fagan, sef@Kithrup.COM
- */
-
-typedef struct __dirdesc {
-	int	dd_fd;
-	long	dd_loc;
-	long	dd_size;
-	char	*dd_buf;
-	int	dd_len;
-	long	dd_seek;
-} DIR;
-
-# define __dirfd(dp)	((dp)->dd_fd)
-
-DIR *opendir (const char *);
-struct dirent *readdir (DIR *);
-void rewinddir (DIR *);
-int closedir (DIR *);
-
-#include <sys/types.h>
-
-#undef  MAXNAMLEN	/* from unistd.h */
-#ifdef __svr4__
-#define MAXNAMLEN	512
-#else
-#define MAXNAMLEN	255
-#endif
-
-#define d_ino	d_fileno	/* compatibility */
-
-struct dirent {
-	off_t		d_off;
-	unsigned long	d_fileno;
-	unsigned short	d_reclen;
-	unsigned short	d_namlen;
-	char		d_name[MAXNAMLEN + 1];
-};
-
-/* FIXME: include definition of DIRSIZ() ? */
-
-#endif
diff --git a/newlib/libc/sys/sparc64/sys/fcntl.h b/newlib/libc/sys/sparc64/sys/fcntl.h
deleted file mode 100644
index 940649ac7..000000000
--- a/newlib/libc/sys/sparc64/sys/fcntl.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* sys/fcntl.h for sparc64 */
-
-/* This is basically the same as the default version, except that a few of
-   the values are different on Solaris (eg: FCREAT).
-   We support both SunOS4 and Solaris.  */
-
-#ifndef	_SYS_FCNTL_H_
-#define	_SYS_FCNTL_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-
-#define	_FOPEN		(-1)	/* from sys/file.h, kernel use only */
-#define	_FREAD		0x0001	/* read enabled */
-#define	_FWRITE		0x0002	/* write enabled */
-#define	_FNDELAY	0x0004	/* non blocking I/O (4.2 style) */
-#define	_FAPPEND	0x0008	/* append (writes guaranteed at the end) */
-#ifdef __svr4__
-#define _FNONBLOCK	0x0080	/* non blocking I/O (POSIX) */
-#define _FCREAT		0x0100	/* open with file create */
-#define _FTRUNC		0x0200	/* open with truncation */
-#define _FEXCL		0x0400	/* error on open if file exists */
-#define _FNOCTTY	0x0800	/* don't assign a ctty on this open */
-#else
-#define	_FMARK		0x0010	/* internal; mark during gc() */
-#define	_FDEFER		0x0020	/* internal; defer for next gc pass */
-#define	_FASYNC		0x0040	/* signal pgrp when data ready */
-#define	_FSHLOCK	0x0080	/* BSD flock() shared lock present */
-#define	_FEXLOCK	0x0100	/* BSD flock() exclusive lock present */
-#define	_FCREAT		0x0200	/* open with file create */
-#define	_FTRUNC		0x0400	/* open with truncation */
-#define	_FEXCL		0x0800	/* error on open if file exists */
-#define	_FNBIO		0x1000	/* non blocking I/O (sys5 style) */
-#define	_FSYNC		0x2000	/* do all writes synchronously */
-#define	_FNONBLOCK	0x4000	/* non blocking I/O (POSIX style) */
-#define	_FNOCTTY	0x8000	/* don't assign a ctty on this open */
-#endif /* ! __svr4__ */
-
-#define	O_ACCMODE	(O_RDONLY|O_WRONLY|O_RDWR)
-
-/*
- * Flag values for open(2) and fcntl(2)
- * The kernel adds 1 to the open modes to turn it into some
- * combination of FREAD and FWRITE.
- */
-#define	O_RDONLY	0		/* +1 == FREAD */
-#define	O_WRONLY	1		/* +1 == FWRITE */
-#define	O_RDWR		2		/* +1 == FREAD|FWRITE */
-#define	O_APPEND	_FAPPEND
-#define	O_CREAT		_FCREAT
-#define	O_TRUNC		_FTRUNC
-#define	O_EXCL		_FEXCL
-/*	O_SYNC		_FSYNC		not posix, defined below */
-/*	O_NDELAY	_FNDELAY 	set in include/fcntl.h */
-/*	O_NDELAY	_FNBIO 		set in 5include/fcntl.h */
-#define	O_NONBLOCK	_FNONBLOCK
-#define	O_NOCTTY	_FNOCTTY
-
-#ifndef	_POSIX_SOURCE
-
-#define	O_SYNC		_FSYNC
-
-/*
- * Flags that work for fcntl(fd, F_SETFL, FXXXX)
- */
-#define	FAPPEND		_FAPPEND
-#define	FSYNC		_FSYNC
-#define	FASYNC		_FASYNC
-#define	FNBIO		_FNBIO
-#define	FNONBIO		_FNONBLOCK	/* XXX fix to be NONBLOCK everywhere */
-#define	FNDELAY		_FNDELAY
-
-/*
- * Flags that are disallowed for fcntl's (FCNTLCANT);
- * used for opens, internal state, or locking.
- */
-#define	FREAD		_FREAD
-#define	FWRITE		_FWRITE
-#define	FMARK		_FMARK
-#define	FDEFER		_FDEFER
-#define	FSHLOCK		_FSHLOCK
-#define	FEXLOCK		_FEXLOCK
-
-/*
- * The rest of the flags, used only for opens
- */
-#define	FOPEN		_FOPEN
-#define	FCREAT		_FCREAT
-#define	FTRUNC		_FTRUNC
-#define	FEXCL		_FEXCL
-#define	FNOCTTY		_FNOCTTY
-
-#endif	!_POSIX_SOURCE
-
-/* XXX close on exec request; must match UF_EXCLOSE in user.h */
-#define	FD_CLOEXEC	1	/* posix */
-
-/* fcntl(2) requests */
-#define	F_DUPFD		0	/* Duplicate fildes */
-#define	F_GETFD		1	/* Get fildes flags (close on exec) */
-#define	F_SETFD		2	/* Set fildes flags (close on exec) */
-#define	F_GETFL		3	/* Get file flags */
-#define	F_SETFL		4	/* Set file flags */
-#ifndef	_POSIX_SOURCE
-#ifdef __svr4__
-#define	F_GETOWN 	23	/* Get owner - for ASYNC */
-#define	F_SETOWN 	24	/* Set owner - for ASYNC */
-#else
-#define	F_GETOWN 	5	/* Get owner - for ASYNC */
-#define	F_SETOWN 	6	/* Set owner - for ASYNC */
-#endif
-#endif	/* !_POSIX_SOURCE */
-#ifdef __svr4__
-#define	F_GETLK  	14	/* Get record-locking information */
-#define	F_SETLK		6	/* Set or Clear a record-lock (Non-Blocking) */
-#define	F_SETLKW 	7	/* Set or Clear a record-lock (Blocking) */
-#else
-#define	F_GETLK  	7	/* Get record-locking information */
-#define	F_SETLK  	8	/* Set or Clear a record-lock (Non-Blocking) */
-#define	F_SETLKW 	9	/* Set or Clear a record-lock (Blocking) */
-#endif
-#ifndef	_POSIX_SOURCE
-#define	F_RGETLK 	10	/* Test a remote lock to see if it is blocked */
-#define	F_RSETLK 	11	/* Set or unlock a remote lock */
-#define	F_CNVT 		12	/* Convert a fhandle to an open fd */
-#define	F_RSETLKW 	13	/* Set or Clear remote record-lock(Blocking) */
-#endif	/* !_POSIX_SOURCE */
-
-/* fcntl(2) flags (l_type field of flock structure) */
-#define	F_RDLCK		1	/* read lock */
-#define	F_WRLCK		2	/* write lock */
-#define	F_UNLCK		3	/* remove lock(s) */
-#ifndef	_POSIX_SOURCE
-#define	F_UNLKSYS	4	/* remove remote locks for a given system */
-#endif	/* !_POSIX_SOURCE */
-
-/*#include <sys/stdtypes.h>*/
-
-/* file segment locking set data type - information passed to system by user */
-struct flock {
-	short	l_type;		/* F_RDLCK, F_WRLCK, or F_UNLCK */
-	short	l_whence;	/* flag to choose starting offset */
-	long	l_start;	/* relative offset, in bytes */
-	long	l_len;		/* length, in bytes; 0 means lock to EOF */
-	short	l_pid;		/* returned with F_GETLK */
-	short	l_xxx;		/* reserved for future use */
-};
-
-#ifndef	_POSIX_SOURCE
-/* extended file segment locking set data type */
-struct eflock {
-	short	l_type;		/* F_RDLCK, F_WRLCK, or F_UNLCK */
-	short	l_whence;	/* flag to choose starting offset */
-	long	l_start;	/* relative offset, in bytes */
-	long	l_len;		/* length, in bytes; 0 means lock to EOF */
-	short	l_pid;		/* returned with F_GETLK */
-	short	l_xxx;		/* reserved for future use */
-	long	l_rpid;		/* Remote process id wanting this lock */
-	long	l_rsys;		/* Remote system id wanting this lock */
-};
-#endif	/* !_POSIX_SOURCE */
-
-
-#include <sys/types.h>
-#include <sys/stat.h>		/* sigh. for the mode bits for open/creat */
-
-extern int open _PARAMS ((const char *, int, ...));
-extern int creat _PARAMS ((const char *, mode_t));
-extern int fcntl _PARAMS ((int, int, ...));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif	/* !_SYS_FCNTL_H_ */
diff --git a/newlib/libc/sys/sparc64/sys/file.h b/newlib/libc/sys/sparc64/sys/file.h
deleted file mode 100644
index 768494377..000000000
--- a/newlib/libc/sys/sparc64/sys/file.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* This is the same as sys/fcntl.h for now.  */
-
-#include <sys/fcntl.h>
diff --git a/newlib/libc/sys/sparc64/sys/stat.h b/newlib/libc/sys/sparc64/sys/stat.h
deleted file mode 100644
index 256c1b41b..000000000
--- a/newlib/libc/sys/sparc64/sys/stat.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef	_SYS_STAT_H
-#define	_SYS_STAT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <_ansi.h>
-#include <sys/types.h>
-
-#ifdef __svr4__
-
-#include <sys/time.h>
-
-#define	_ST_FSTYPSZ 16		/* array size for file system type name */
-
-struct	stat 
-{
-  dev_t		st_dev;
-  long		st_pad1[3];	/* reserved for network id */
-  ino_t		st_ino;
-  mode_t	st_mode;
-  nlink_t	st_nlink;
-  uid_t		st_uid;
-  gid_t		st_gid;
-  dev_t		st_rdev;
-  long		st_pad2[2];
-  off_t		st_size;
-  long		st_pad3;	/* future off_t expansion */
-  timestruc_t 	st_atim;
-  timestruc_t 	st_mtim;
-  timestruc_t 	st_ctim;
-  long		st_blksize;
-  long		st_blocks;
-  char		st_fstype[_ST_FSTYPSZ];
-  long		st_pad4[8];	/* expansion area */
-};
-
-#define	st_atime	st_atim.tv_sec
-#define	st_mtime	st_mtim.tv_sec
-#define	st_ctime	st_ctim.tv_sec
-
-#else
-
-#include <time.h>
-
-struct	stat 
-{
-  dev_t		st_dev;
-  ino_t		st_ino;
-  mode_t	st_mode;
-  short		st_nlink;
-  uid_t		st_uid;
-  gid_t		st_gid;
-  dev_t		st_rdev;
-  off_t		st_size;
-  time_t	st_atime;
-  int		st_spare1;
-  time_t	st_mtime;
-  int		st_spare2;
-  time_t	st_ctime;
-  int		st_spare3;
-  long		st_blksize;
-  long		st_blocks;
-  long		st_spare4[2];
-};
-
-#endif
-
-#define	_IFMT		0170000	/* type of file */
-#define		_IFDIR	0040000	/* directory */
-#define		_IFCHR	0020000	/* character special */
-#define		_IFBLK	0060000	/* block special */
-#define		_IFREG	0100000	/* regular */
-#define		_IFLNK	0120000	/* symbolic link */
-#define		_IFSOCK	0140000	/* socket */
-#define		_IFIFO	0010000	/* fifo */
-
-#define	S_ISUID		0004000	/* set user id on execution */
-#define	S_ISGID		0002000	/* set group id on execution */
-#ifndef	_POSIX_SOURCE
-#define	S_ISVTX		0001000	/* save swapped text even after use */
-#define	S_IREAD		0000400	/* read permission, owner */
-#define	S_IWRITE 	0000200	/* write permission, owner */
-#define	S_IEXEC		0000100	/* execute/search permission, owner */
-
-#define	S_ENFMT 	0002000	/* enforcement-mode locking */
-
-#define	S_IFMT		_IFMT
-#define	S_IFDIR		_IFDIR
-#define	S_IFCHR		_IFCHR
-#define	S_IFBLK		_IFBLK
-#define	S_IFREG		_IFREG
-#define	S_IFLNK		_IFLNK
-#define	S_IFSOCK	_IFSOCK
-#define	S_IFIFO		_IFIFO
-#endif	/* !_POSIX_SOURCE */
-
-
-#define	S_IRWXU 	0000700	/* rwx, owner */
-#define		S_IRUSR	0000400	/* read permission, owner */
-#define		S_IWUSR	0000200	/* write permission, owner */
-#define		S_IXUSR	0000100	/* execute/search permission, owner */
-#define	S_IRWXG		0000070	/* rwx, group */
-#define		S_IRGRP	0000040	/* read permission, group */
-#define		S_IWGRP	0000020	/* write permission, grougroup */
-#define		S_IXGRP	0000010	/* execute/search permission, group */
-#define	S_IRWXO		0000007	/* rwx, other */
-#define		S_IROTH	0000004	/* read permission, other */
-#define		S_IWOTH	0000002	/* write permission, other */
-#define		S_IXOTH	0000001	/* execute/search permission, other */
-
-#define	S_ISBLK(m)	(((m)&_IFMT) == _IFBLK)
-#define	S_ISCHR(m)	(((m)&_IFMT) == _IFCHR)
-#define	S_ISDIR(m)	(((m)&_IFMT) == _IFDIR)
-#define	S_ISFIFO(m)	(((m)&_IFMT) == _IFIFO)
-#define	S_ISREG(m)	(((m)&_IFMT) == _IFREG)
-#define	S_ISLNK(m)	(((m)&_IFMT) == _IFLNK)
-#define	S_ISSOCK(m)	(((m)&_IFMT) == _IFSOCK)
-
-int	_EXFUN(chmod,( const char *_path, mode_t _mode ));
-int	_EXFUN(fstat,( int _fd, struct stat *_sbuf ));
-int	_EXFUN(mkdir,( char *_path, mode_t _mode ));
-int	_EXFUN(mkfifo,( char *_path, mode_t _mode ));
-int	_EXFUN(stat,( const char *_path, struct stat *_sbuf ));
-mode_t	_EXFUN(umask,( mode_t _mask ));
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* _SYS_STAT_H */
diff --git a/newlib/libc/sys/sparc64/sys/syscall.h b/newlib/libc/sys/sparc64/sys/syscall.h
deleted file mode 100644
index df5da365f..000000000
--- a/newlib/libc/sys/sparc64/sys/syscall.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef _SYSCALL_H_
-#define _SYSCALL_H_
-
-/*
- * This file defines the system calls for SPARC.
- *
- * WARNING: This file can be included by assembler files.
- */
-
-#define	SYS_exit	1
-#define	SYS_fork	2
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#ifdef __svr4__
-#define SYS_time	13	/* old time in sunos4 */
-#endif
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define SYS_brk		17
-#ifdef __svr4__
-#define SYS_stat	18	/* old stat in sunos4 */
-#endif
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#ifdef __svr4__
-#define SYS_mount	21	/* old mount in sunos4 */
-#define SYS_umount	22	/* old umount in sunos4 */
-#define SYS_setuid	23	/* old setuid in sunos4 */
-#endif
-#define	SYS_getuid	24
-#ifdef __svr4__
-#define SYS_stime	25	/* old stime in sunos4 */
-#endif
-#define	SYS_ptrace	26
-#ifdef __svr4__
-#define SYS_alarm	27	/* old alarm in sunos4 */
-#define SYS_fstat	28	/* old fstat in sunos4 */
-#define SYS_pause	29	/* old pause in sunos4 */
-#define SYS_utime	30	/* old utime in sunos4 */
-#define SYS_stty	31	/* old stty in sunos4 */
-#define SYS_gtty	32	/* old gtty in sunos4 */
-#endif
-#define	SYS_access	33
-#ifdef __svr4__
-#define SYS_nice	34	/* old nice in sunos4 */
-#define SYS_statfs	35	/* old ftime in sunos4 */
-#endif
-#define	SYS_sync	36
-#define	SYS_kill	37
-#ifdef __svr4__
-#define	SYS_fstatfs	38
-#define	SYS_pgrpsys	39	/* old setpgrp in sunos4 */
-#define	SYS_xenix	40
-#else
-#define	SYS_stat	38
-#define	SYS_lstat	40
-#endif
-#define	SYS_dup		41
-#define	SYS_pipe	42
-#define SYS_times	43	/* times is obsolete in sunos4, used anyway */
-#define	SYS_profil	44
-#ifdef __svr4__
-#define SYS_plock	45	/* unused in sunos4 */
-#define SYS_setgid	46	/* old setgid in sunos4 */
-#endif
-#define	SYS_getgid	47
-#ifdef __svr4__
-#define SYS_signal	48	/* old sigsys in sunos4 */
-#define SYS_msgsys	49	/* unused in sunos4 */
-#define SYS_sun		50	/* unused in sunos4 */
-#endif
-#define	SYS_acct	51
-#ifdef __svr4__
-#define SYS_shmsys	52	/* old phys in sunos4 */
-#define	SYS_semsys	53
-#else
-#define	SYS_mctl	53
-#endif
-#define	SYS_ioctl	54
-#ifdef __svr4__
-#define	SYS_uadmin	55
-#else
-#define	SYS_reboot	55
-#endif
-				/* 56 is old: mpxchan (reserved in sunos5) */
-#ifdef __svr4__
-#define	SYS_utssys	57
-#define	SYS_fsync	58
-#else
-#define	SYS_symlink	57
-#define	SYS_readlink	58
-#endif
-#define	SYS_execve	59
-#define	SYS_umask	60
-#define	SYS_chroot	61
-#ifdef __svr4__
-#define	SYS_fcntl	62
-#define SYS_ulimit	63	/* unused in sunos4 */
-				/* 64-77 unused/reserved in sunos5 */
-#else
-#define	SYS_fstat	62
-#define	SYS_getpagesize 64
-#define	SYS_msync	65
-				/* 66 is old: vfork */
-				/* 67 is old: vread */
-				/* 68 is old: vwrite */
-#define	SYS_sbrk	69
-#define	SYS_sstk	70
-#define	SYS_mmap	71
-#define	SYS_vadvise	72
-#define	SYS_munmap	73
-#define	SYS_mprotect	74
-#define	SYS_madvise	75
-#define	SYS_vhangup	76
-				/* 77 is old: vlimit */
-#endif
-
-#ifdef __svr4__
-#define	SYS_rfsys	78
-#define	SYS_rmdir	79
-#define	SYS_mkdir	80
-#define	SYS_getdents	81
-				/* 82 not used, was libattach */
-				/* 83 not used, was libdetach */
-#define	SYS_sysfs	84
-#define	SYS_getmsg	85
-#define	SYS_putmsg	86
-#define	SYS_poll	87
-#define	SYS_lstat	88
-#define	SYS_symlink	89
-#define	SYS_readlink	90
-#define	SYS_setgroups	91
-#define	SYS_getgroups	92
-#define	SYS_fchmod	93
-#define	SYS_fchown	94
-#define	SYS_sigprocmask	95
-#define	SYS_sigsuspend	96
-#define	SYS_sigaltstack	97
-#define	SYS_sigaction	98
-#define	SYS_sigpending	99
-#define	SYS_context	100
-#define	SYS_evsys	101
-#define	SYS_evtrapret	102
-#define	SYS_statvfs	103
-#define	SYS_fstatvfs	104
-				/* 105 reserved */
-#define	SYS_nfssys	106
-#define	SYS_waitsys	107
-#define	SYS_sigsendsys	108
-#define	SYS_hrtsys	109
-#define	SYS_acancel	110
-#define	SYS_async	111
-#define	SYS_priocntlsys	112
-#define	SYS_pathconf	113
-#define	SYS_mincore	114
-#define	SYS_mmap	115
-#define	SYS_mprotect	116
-#define	SYS_munmap	117
-#define	SYS_fpathconf	118
-#define	SYS_vfork	119
-#define	SYS_fchdir	120
-#define	SYS_readv	121
-#define	SYS_writev	122
-#define	SYS_xstat	123
-#define	SYS_lxstat	124
-#define	SYS_fxstat	125
-#define	SYS_xmknod	126
-#define	SYS_clocal	127
-#define	SYS_setrlimit	128
-#define	SYS_getrlimit	129
-#define	SYS_lchown	130
-#define	SYS_memcntl	131
-#define	SYS_getpmsg	132
-#define	SYS_putpmsg	133
-#define	SYS_rename	134
-#define	SYS_uname	135
-#define	SYS_setegid	136
-#define	SYS_sysconfig	137
-#define	SYS_adjtime	138
-#define	SYS_systeminfo	139
-#define	SYS_seteuid	141
-#define	SYS_vtrace	142
-#define	SYS_fork1	143
-#define	SYS_sigwait	144
-#define	SYS_lwp_info	145
-#define	SYS_yield	146
-#define	SYS_lwp_sema_p	147
-#define	SYS_lwp_sema_v	148
-#define	SYS_modctl	152
-#define	SYS_fchroot	153
-#define	SYS_utimes	154
-#define	SYS_vhangup	155
-#define	SYS_gettimeofday	156
-#define	SYS_getitimer		157
-#define	SYS_setitimer		158
-#define	SYS_lwp_create		159
-#define	SYS_lwp_exit		160
-#define	SYS_lwp_suspend		161
-#define	SYS_lwp_continue	162
-#define	SYS_lwp_kill		163
-#define	SYS_lwp_self		164
-#define	SYS_lwp_setprivate	165
-#define	SYS_lwp_getprivate	166
-#define	SYS_lwp_wait		167
-#define	SYS_lwp_mutex_unlock	168
-#define	SYS_lwp_mutex_lock	169
-#define	SYS_lwp_cond_wait	170
-#define	SYS_lwp_cond_signal	171
-#define	SYS_lwp_cond_broadcast	172
-#define	SYS_pread		173
-#define	SYS_pwrite		174
-#define	SYS_llseek		175
-#define	SYS_inst_sync		176
-#define	SYS_auditsys		186
-#else
-#define	SYS_mincore	78
-#define	SYS_getgroups	79
-#define	SYS_setgroups	80
-#define	SYS_getpgrp	81
-#define	SYS_setpgrp	82
-#define	SYS_setitimer	83
-				/* 84 is old: wait & wait3 */
-#define	SYS_swapon	85
-#define	SYS_getitimer	86
-#define	SYS_gethostname	87
-#define	SYS_sethostname	88
-#define	SYS_getdtablesize 89
-#define	SYS_dup2	90
-#define	SYS_getdopt	91
-#define	SYS_fcntl	92
-#define	SYS_select	93
-#define	SYS_setdopt	94
-#define	SYS_fsync	95
-#define	SYS_setpriority	96
-#define	SYS_socket	97
-#define	SYS_connect	98
-#define	SYS_accept	99
-#define	SYS_getpriority	100
-#define	SYS_send	101
-#define	SYS_recv	102
-				/* 103 was socketaddr */
-#define	SYS_bind	104
-#define	SYS_setsockopt	105
-#define	SYS_listen	106
-				/* 107 was vtimes */
-#define	SYS_sigvec	108
-#define	SYS_sigblock	109
-#define	SYS_sigsetmask	110
-#define	SYS_sigpause	111
-#define	SYS_sigstack	112
-#define	SYS_recvmsg	113
-#define	SYS_sendmsg	114
-#define	SYS_vtrace	115
-#define	SYS_gettimeofday 116
-#define	SYS_getrusage	117
-#define	SYS_getsockopt	118
-				/* 119 is old resuba */
-#define	SYS_readv	120
-#define	SYS_writev	121
-#define	SYS_settimeofday 122
-#define	SYS_fchown	123
-#define	SYS_fchmod	124
-#define	SYS_recvfrom	125
-#define	SYS_setreuid	126
-#define	SYS_setregid	127
-#define	SYS_rename	128
-#define	SYS_truncate	129
-#define	SYS_ftruncate	130
-#define	SYS_flock	131
-				/* 132 is unused */
-#define	SYS_sendto	133
-#define	SYS_shutdown	134
-#define	SYS_socketpair	135
-#define	SYS_mkdir	136
-#define	SYS_rmdir	137
-#define	SYS_utimes	138
-				/* 139 is unused */
-#define	SYS_adjtime	140
-#define	SYS_getpeername	141
-#define	SYS_gethostid	142
-				/* 143 is old: sethostid */
-#define	SYS_getrlimit	144
-#define	SYS_setrlimit	145
-#define	SYS_killpg	146
-				/* 147 is unused */
-				/* 148 is old: setquota */
-				/* 149 is old: quota */
-#define	SYS_getsockname	150
-#define	SYS_getmsg	151
-#define	SYS_putmsg	152
-#define	SYS_poll	153
-				/* 154 is old: nfs_mount */
-#define	SYS_nfssvc	155
-#define	SYS_getdirentries 156
-#define	SYS_statfs	157
-#define	SYS_fstatfs	158
-#define	SYS_unmount	159
-#define	SYS_async_daemon 160
-#define	SYS_getfh	161
-#define	SYS_getdomainname 162
-#define	SYS_setdomainname 163
-				/* 164 is old: pcfs_mount */
-#define	SYS_quotactl	165
-#define	SYS_exportfs	166
-#define	SYS_mount	167
-#define	SYS_ustat	168
-#define	SYS_semsys	169
-#define	SYS_msgsys	170
-#define	SYS_shmsys	171
-#define	SYS_auditsys	172
-#define	SYS_rfssys	173
-#define	SYS_getdents	174
-#define	SYS_setsid	175
-#define	SYS_fchdir	176
-#define	SYS_fchroot	177
-#define	SYS_vpixsys	178
-
-#define	SYS_aioread	179
-#define	SYS_aiowrite	180
-#define	SYS_aiowait	181
-#define	SYS_aiocancel	182
-
-#define	SYS_sigpending	183
-				/* 184 is available */
-#define	SYS_setpgid	185
-#define	SYS_pathconf	186
-#define	SYS_fpathconf	187
-#define	SYS_sysconf	188
-
-#define	SYS_uname	189
-
-#endif /* ! __svr4__ */
-
-#endif /* _SYSCALL_H_ */
-
-
-
diff --git a/newlib/libc/sys/sparc64/sys/syscallasm.h b/newlib/libc/sys/sparc64/sys/syscallasm.h
deleted file mode 100644
index d882a9e31..000000000
--- a/newlib/libc/sys/sparc64/sys/syscallasm.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _SYSCALLASM_H_
-#define _SYSCALLASM_H_
-
-/*
- * This file defines the system calls for SPARC for the assembler.
- * Anything C-ish is not allowed in this file.
- * C files should include syscall.h.
- */
-
-#include <sys/syscall.h>
-
-/* Some macros for writing assember syscall stubs.  */
-
-#ifdef __svr4__
-#define TEXT_SECTION	.section ".text"
-#define DATA_SECTION	.section ".data"
-#define ALIGN(x)	.align x
-#define GLOBAL(sym)	.global sym
-#define WORD(x)		.long x
-#define ASM_SYMBOL(name) name
-#define ASM_PRIVATE_SYMBOL(name) _##name
-#define SYSCALL_TRAP	8
-#else
-#define TEXT_SECTION	.text
-#define DATA_SECTION	.data
-#define ALIGN(x)	.align x
-#define GLOBAL(sym)	.global sym
-#define WORD(x)		.word x
-#define ASM_SYMBOL(name) _##name
-#define ASM_PRIVATE_SYMBOL(name) name
-#define SYSCALL_TRAP	0
-#endif
-
-#define defsyscall(name, n) \
-	TEXT_SECTION ;			\
-	ALIGN (4) ;			\
-	GLOBAL (ASM_SYMBOL (name)) ;	\
-ASM_SYMBOL (name):			\
-	mov	n,%g1 ;			\
-	ta	%icc,SYSCALL_TRAP ;	\
-	bcc	noerr ;			\
-	sethi	%hi (ASM_PRIVATE_SYMBOL (cerror)),%g1 ;		\
-	or	%g1,%lo (ASM_PRIVATE_SYMBOL (cerror)),%g1 ;	\
-	jmpl	%g1+%g0,%g0 ;		\
-	nop ;				\
-noerr:					\
-	jmpl	%o7+8,%g0 ;		\
-	nop
-
-/* Support for reentrant syscalls.  The "struct _reent *" arg is always the
-   the first one.  After that we allow up to four additional args.  We could
-   allow more, but that's all we need for now.
-
-   It may seem inefficient to have the reent arg be the first one as it means
-   copying all the other args into place (as opposed to making the reent arg
-   the last one in which case there wouldn't be any copying).  I chose a clean
-   design over an extra four instructions in a system call.  All other
-   reentrant functions use the first arg this way.  */
-
-#define defsyscall_r(name, n) \
-	TEXT_SECTION ;			\
-	ALIGN (4) ;			\
-	GLOBAL (ASM_SYMBOL (name)) ;	\
-ASM_SYMBOL (name):			\
-	mov	n,%g1 ;			\
-	mov	%o0,%o5 ;		\
-	mov	%o1,%o0 ;		\
-	mov	%o2,%o1 ;		\
-	mov	%o3,%o2 ;		\
-	mov	%o4,%o3 ;		\
-	ta	%icc,SYSCALL_TRAP ;	\
-	bcc	noerr ;			\
-	sethi	%hi (ASM_PRIVATE_SYMBOL (cerror_r)),%g1 ;	\
-	or	%g1,%lo (ASM_PRIVATE_SYMBOL (cerror_r)),%g1 ;	\
-	jmpl	%g1+%g0,%g0 ;		\
-	mov	%o5,%o1 ;		\
-noerr:					\
-	jmpl	%o7+8,%g0 ;		\
-	nop
-
-#define seterrno() \
-	sethi	%hi (ASM_PRIVATE_SYMBOL (cerror)),%g1 ;		\
-	or	%g1,%lo (ASM_PRIVATE_SYMBOL (cerror)),%g1 ;	\
-	jmpl	%g1+%g0,%g0 ;		\
-	nop
-
-#endif /* _SYSCALLASM_H_ */
diff --git a/newlib/libc/sys/sparc64/sys/termios.h b/newlib/libc/sys/sparc64/sys/termios.h
deleted file mode 100644
index ffdeb9bb2..000000000
--- a/newlib/libc/sys/sparc64/sys/termios.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef	_SYS_TERMIOS_H
-# define _SYS_TERMIOS_H
-
-# define _XCGETA (('x'<<8)|1)
-# define _XCSETA (('x'<<8)|2)
-# define _XCSETAW (('x'<<8)|3)
-# define _XCSETAF (('x'<<8)|4)
-# define _TCSBRK (('T'<<8)|5)
-# define _TCFLSH (('T'<<8)|7)
-# define _TCXONC (('T'<<8)|6)
-
-# define TCOOFF	0
-# define TCOON	1
-# define TCIOFF	2
-# define TCION	3
-
-# define TCIFLUSH	0
-# define TCOFLUSH	1
-# define TCIOFLUSH	2
-
-# define NCCS 13
-
-# define TCSAFLUSH	_XCSETAF
-# define TCSANOW	_XCSETA
-# define TCSADRAIN	_XCSETAW
-# define TCSADFLUSH	_XCSETAF
-
-# define IGNBRK	000001
-# define BRKINT	000002
-# define IGNPAR	000004
-# define INPCK	000020
-# define ISTRIP	000040
-# define INLCR	000100
-# define IGNCR	000200
-# define ICRNL	000400
-# define IXON	002000
-# define IXOFF	010000
-
-# define OPOST	000001
-# define OCRNL	000004
-# define ONLCR	000010
-# define ONOCR	000020
-# define TAB3	014000
-
-# define CLOCAL	004000
-# define CREAD	000200
-# define CSIZE	000060
-# define CS5	0
-# define CS6	020
-# define CS7	040
-# define CS8	060
-# define CSTOPB	000100
-# define HUPCL	002000
-# define PARENB	000400
-# define PAODD	001000
-
-# define ECHO	0000010
-# define ECHOE	0000020
-# define ECHOK	0000040
-# define ECHONL	0000100
-# define ICANON	0000002
-# define IEXTEN	0000400	/* anybody know *what* this does?! */
-# define ISIG	0000001
-# define NOFLSH	0000200
-# define TOSTOP	0001000
-
-# define VEOF	4	/* also VMIN -- thanks, AT&T */
-# define VEOL	5	/* also VTIME -- thanks again */
-# define VERASE	2
-# define VINTR	0
-# define VKILL	3
-# define VMIN	4	/* also VEOF */
-# define VQUIT	1
-# define VSUSP	10
-# define VTIME	5	/* also VEOL */
-# define VSTART	11
-# define VSTOP	12
-
-# define B0	000000
-# define B50	000001
-# define B75	000002
-# define B110	000003
-# define B134	000004
-# define B150	000005
-# define B200	000006
-# define B300	000007
-# define B600	000010
-# define B1200	000011
-# define B1800	000012
-# define B2400	000013
-# define B4800	000014
-# define B9600	000015
-# define B19200	000016
-# define B38400	000017
-
-typedef unsigned char cc_t;
-typedef unsigned short tcflag_t;
-typedef char speed_t;
-
-struct termios {
-	tcflag_t	c_iflag;
-	tcflag_t	c_oflag;
-	tcflag_t	c_cflag;
-	tcflag_t	c_lflag;
-	char		c_line;
-	cc_t		c_cc[NCCS];
-	speed_t		c_ispeed;
-	speed_t		c_ospeed;
-};
-
-# ifndef _NO_MACROS
-
-#  define cfgetospeed(tp)	((tp)->c_ospeed)
-#  define cfgetispeed(tp)	((tp)->c_ispeed)
-#  define cfsetospeed(tp,s)	(((tp)->c_ospeed = (s)), 0)
-#  define cfsetispeed(tp,s)	(((tp)->c_ispeed = (s)), 0)
-#  define tcdrain(fd)		_ioctl (fd, _TCSBRK, 1)
-# endif	/* _NO_MACROS */
-
-#endif	/* _SYS_TERMIOS_H */
-
diff --git a/newlib/libc/sys/sparc64/sys/time.h b/newlib/libc/sys/sparc64/sys/time.h
deleted file mode 100644
index 36f8e1c11..000000000
--- a/newlib/libc/sys/sparc64/sys/time.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _SYS_TIME_H
-#define _SYS_TIME_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct timeval {
-  long tv_sec;
-  long tv_usec;
-};
-
-typedef struct timestruc {
-  time_t tv_sec;
-  long tv_nsec;
-} timestruc_t;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _SYS_TIME_H */
diff --git a/newlib/libc/sys/sparc64/sys/utime.h b/newlib/libc/sys/sparc64/sys/utime.h
deleted file mode 100644
index e2a55faff..000000000
--- a/newlib/libc/sys/sparc64/sys/utime.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _SYS_UTIME_H
-# define _SYS_UTIME_H
-
-#include <time.h>
-
-struct utimbuf {
-	time_t	actime;
-	time_t	modtime;
-};
-
-#endif	/* _SYS_UTIME_H */
-
diff --git a/newlib/libc/sys/sparc64/sys/utmp.h b/newlib/libc/sys/sparc64/sys/utmp.h
deleted file mode 100644
index f519e6af0..000000000
--- a/newlib/libc/sys/sparc64/sys/utmp.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _UTMP_H
-# define _UTMP_H
-
-#include <sys/types.h>
-
-# define UTMP_FILE "/etc/utmp"
-# define WTMP_FILE "/etc/wtmp"
-
-struct utmp {
-	char	ut_user[8];	/* how limited */
-	char	ut_id[4];	/* ditto */
-	char	ut_line[12];	/* I'm repeating myself */
-	short	ut_pid;
-	short	ut_type;
-	struct exit_status {
-		short e_termination;
-		short e_exit;
-	} ut_exit;		/* for DEAD_PROCESS processes */
-	time_t	ut_time;
-};
-
-/* Definitions for ut_type fields */
-
-# define	EMPTY	0
-# define	RUN_LVL	1
-# define	BOOT_TIME	2
-# define	OLD_TIME	3
-# define	NEW_TIME	4
-# define	INIT_PROCESS	5
-# define	LOGIN_PROCESS	6
-# define	USER_PROCESS	7
-# define	DEAD_PROCESS	8
-# define	ACCOUNTING	9
-# define	UTMAXTYPE	ACCOUNTING
-
-# define	RUNLVL_MSG	"run-level %c"
-# define	BOOT_MSG	"system boot"
-# define	OTIME_MSG	"old time"
-# define	NTIME_MSG	"new time"
-
-#endif	/* _UTMP_H */
-
-
diff --git a/newlib/libc/sys/sparc64/sys/wait.h b/newlib/libc/sys/sparc64/sys/wait.h
deleted file mode 100644
index 08b756aab..000000000
--- a/newlib/libc/sys/sparc64/sys/wait.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _WAIT_H
-# define _WAIT_H
-
-# define WNOHANG 1
-# define WUNTRACED 2
-
-/*
- * Unlike the atrocity that BSD ended up using, we do not have a "union
- * wait," although I could probably implement one.  Given the code I
- * sometimes end up porting, it might be a good thing.  Anyway, the
- * format of a stat thingy, filled in by the wait*() routines, is:
- * struct {
- *    int filler:16;
- *    union {
- *        struct stopped {
- *            int signo:8;
- *            int o177:8;	// will be 0177 
- *        };
- *        struct exited {
- *            int retval:8;
- *            int zero:8;	// 0, obviously 8-)
- *        };
- *        struct termed {
- *            int zero:8;	// zeroes
- *            int corep:1;	// was there a core file?
- *            int signo:7;	// what?!  Only 127 signals?!
- *        };
- *        int value:16;
- *     };
- * };
- *
- * Braver souls than I can turn that into a union wait, if desired.  Ick.
- */
-
-# define WIFEXITED(val)	((val)&0xff)
-# define WEXITSTATUS(val)	(((val)>>8)&0xff)
-# define WIFSIGNALED(val)	((val) && !((val)&0xff))
-# define WTERMSIG(val)	(((val)>>8)&0x7f)
-# define WIFSTOPPED(val) (((val)&0xff)==0177)
-# define WSTOPSIG(val)	(((val)>>8)&0xff)
-#endif	/* _SYS_WAIT_H */
-
diff --git a/newlib/libc/sys/sparc64/telldir.c b/newlib/libc/sys/sparc64/telldir.c
deleted file mode 100644
index 37d9de638..000000000
--- a/newlib/libc/sys/sparc64/telldir.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)telldir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * The option SINGLEUSE may be defined to say that a telldir
- * cookie may be used only once before it is freed. This option
- * is used to avoid having memory usage grow without bound.
- */
-#define SINGLEUSE
-
-/*
- * One of these structures is malloced to describe the current directory
- * position each time telldir is called. It records the current magic 
- * cookie returned by getdirentries and the offset within the buffer
- * associated with that return value.
- */
-struct ddloc {
-	struct	ddloc *loc_next;/* next structure in list */
-	long	loc_index;	/* key associated with structure */
-	long	loc_seek;	/* magic cookie returned by getdirentries */
-	long	loc_loc;	/* offset of entry in buffer */
-};
-
-#define	NDIRHASH	32	/* Num of hash lists, must be a power of 2 */
-#define	LOCHASH(i)	((i)&(NDIRHASH-1))
-
-static long	dd_loccnt;	/* Index of entry for sequential readdir's */
-static struct	ddloc *dd_hash[NDIRHASH];   /* Hash list heads for ddlocs */
-
-/*
- * return a pointer into a directory
- */
-long
-telldir(dirp)
-	const DIR *dirp;
-{
-	register int index;
-	register struct ddloc *lp;
-
-	if ((lp = (struct ddloc *)malloc(sizeof(struct ddloc))) == NULL)
-		return (-1);
-	index = dd_loccnt++;
-	lp->loc_index = index;
-	lp->loc_seek = dirp->dd_seek;
-	lp->loc_loc = dirp->dd_loc;
-	lp->loc_next = dd_hash[LOCHASH(index)];
-	dd_hash[LOCHASH(index)] = lp;
-	return (index);
-}
-
-/*
- * seek to an entry in a directory.
- * Only values returned by "telldir" should be passed to seekdir.
- */
-void
-_seekdir(dirp, loc)
-	register DIR *dirp;
-	long loc;
-{
-	register struct ddloc *lp;
-	register struct ddloc **prevlp;
-	struct dirent *dp;
-	extern long lseek();
-
-	prevlp = &dd_hash[LOCHASH(loc)];
-	lp = *prevlp;
-	while (lp != NULL) {
-		if (lp->loc_index == loc)
-			break;
-		prevlp = &lp->loc_next;
-		lp = lp->loc_next;
-	}
-	if (lp == NULL)
-		return;
-	if (lp->loc_loc == dirp->dd_loc && lp->loc_seek == dirp->dd_seek)
-		goto found;
-	(void) lseek(dirp->dd_fd, lp->loc_seek, 0);
-	dirp->dd_seek = lp->loc_seek;
-	dirp->dd_loc = 0;
-	while (dirp->dd_loc < lp->loc_loc) {
-		dp = readdir(dirp);
-		if (dp == NULL)
-			break;
-	}
-found:
-#ifdef SINGLEUSE
-	*prevlp = lp->loc_next;
-	free((caddr_t)lp);
-#endif
-}
diff --git a/newlib/libc/sys/sparc64/template.S b/newlib/libc/sys/sparc64/template.S
deleted file mode 100644
index 53d8e778a..000000000
--- a/newlib/libc/sys/sparc64/template.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/* system call template */
-
-/* Lots of system calls are trivial functions, so we build their source files
-   from a template.  New syscalls can be added simply by editing the
-   Makefile!
-
-   Usage: Compile this file with "func" set to the name of the syscall.  */
-
-#include "sys/syscallasm.h"
-
-#define concat(a,b) a##b
-#define makesys(a)  concat (SYS_, a)
-
-	defsyscall (func, makesys(func))
diff --git a/newlib/libc/sys/sparc64/template_r.S b/newlib/libc/sys/sparc64/template_r.S
deleted file mode 100644
index 8eaa4fc63..000000000
--- a/newlib/libc/sys/sparc64/template_r.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* reentrant system call template */
-
-/* Lots of system calls are trivial functions, so we build their source files
-   from a template.  New syscalls can be added simply by editing the
-   Makefile!
-
-   The system calls aren't necessarily reentrant.  If we were being used in
-   an embedded system they could be.  Reentrant syscalls are also used,
-   however, to provide ANSI C namespace clean access to the host o/s.
-
-   Usage: Compile this file with "func" set to the name of the syscall.  */
-
-#include "sys/syscallasm.h"
-
-#define concat(a,b)	a##b
-#define concat3(a,b,c)	a##b##c
-#define makesys(a)	concat (SYS_, a)
-#define make_r_fn(a)	concat3 (_, a, _r)
-
-/* The leading _'s get turned into #'s by the Makefile.  */
-
-_ifdef REENT
-	defsyscall_r (make_r_fn (func), makesys (func))
-_else
-	defsyscall (func, makesys (func))
-_endif
diff --git a/newlib/libc/sys/sparc64/utime.S b/newlib/libc/sys/sparc64/utime.S
deleted file mode 100644
index c5729cca3..000000000
--- a/newlib/libc/sys/sparc64/utime.S
+++ /dev/null
@@ -1,10 +0,0 @@
-/* utime() system call */
-/* svr4 only, sunos4 version calls utimes */
-
-#ifdef __svr4__
-
-#include "sys/syscallasm.h"
-
-	defsyscall (utime, SYS_utime)
-
-#endif
diff --git a/newlib/libc/sys/sparc64/utime2.c b/newlib/libc/sys/sparc64/utime2.c
deleted file mode 100644
index 5f01e3b2b..000000000
--- a/newlib/libc/sys/sparc64/utime2.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* utime() system call for sunos4 */
-
-#ifndef __svr4__
-
-#include <time.h>
-#include <sys/time.h>
-#include <utime.h>
-
-int
-utime (char *path, struct utimbuf *times)
-{
-  if (times != NULL)
-    {
-      struct timeval timevals[2];
-
-      timevals[0].tv_sec = (long int) times->actime;
-      timevals[0].tv_usec = 0;
-      timevals[1].tv_sec = (long int) times->modtime;
-      timevals[1].tv_usec = 0;
-      return utimes (path, timevals);
-    }
-
-  return utimes (path, (struct timeval *) 0);
-}
-
-#endif
diff --git a/newlib/libc/sys/sparc64/wait.S b/newlib/libc/sys/sparc64/wait.S
deleted file mode 100644
index 49ab5e939..000000000
--- a/newlib/libc/sys/sparc64/wait.S
+++ /dev/null
@@ -1,35 +0,0 @@
-! wait() "system" call
-! It is really not a system call as it uses wait4().
-
-#include "sys/syscallasm.h"
-
-	TEXT_SECTION
-	ALIGN (4)
-
-#ifdef REENT
-
-	GLOBAL (ASM_SYMBOL (_wait_r))
-ASM_SYMBOL (_wait_r):
-	save	%sp,-136,%sp
-	clr	%o1
-	mov	%i1,%o2
-	clr	%o3
-	call	ASM_SYMBOL (_wait4_r)
-	clr	%o4
-	jmpl	%i7+8,%g0
-	restore	%g0,%o0,%o0
-
-#else /* ! REENT */
-
-	GLOBAL (ASM_SYMBOL (wait))
-ASM_SYMBOL (wait):
-	save	%sp,-136,%sp
-	clr	%o0
-	mov	%i0,%o1
-	clr	%o2
-	call	ASM_SYMBOL (wait4)
-	clr	%o3
-	jmpl	%i7+8,%g0
-	restore	%g0,%o0,%o0
-
-#endif /* ! REENT */
diff --git a/newlib/libc/sys/sun4/Makefile.am b/newlib/libc/sys/sun4/Makefile.am
deleted file mode 100644
index 911008641..000000000
--- a/newlib/libc/sys/sun4/Makefile.am
+++ /dev/null
@@ -1,95 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-COPYOFILES = \
-	Ovfork.o \
-	_exit.o \
-	_sigvec.o \
-	abort.o \
-	access.o \
-	cerror.o \
-	chmod.o \
-	chown.o \
-	close.o \
-	creat.o \
-	dup.o \
-	dup2.o \
-	errlst.o \
-	execl.o \
-	execle.o \
-	execv.o \
-	execve.o \
-	execvp.o \
-	fork.o \
-	fstat.o \
-	getdtablesize.o \
-	getpid.o \
-	getrusage.o  \
-	gettimeofday.o \
-	ieee_globals.o \
-	ioctl.o \
-	isatty.o \
-	kill.o \
-	link.o \
-	lseek.o \
-	open.o \
-	pipe.o \
-	popen.o \
-	read.o \
-	sbrk.o \
-	setitimer.o \
-	sigblock.o \
-	signal.o \
-	sigpause.o \
-	sigsetjmp.o \
-	sigsetmask.o \
-	sigtramp.o \
-	sigvec.o \
-	sleep.o \
-	start_float.o \
-	stat.o \
-	time.o \
-	times.o \
-	umask.o \
-	unlink.o \
-	utime.o \
-	utimes.o \
-	wait.o \
-	wait3.o \
-	wait4.o \
-	write.o \
-	rem.o \
-	multiply.o \
-	umultiply.o
-
-# These files are from Sun's libc.a, but the must be renamed because they
-# conflict with other library .o's.  They are renamed to xxxS.o.
-COPYRENAMEOFILES = divS.o
-
-COPYOMFILES = ieee_flags.o
-
-lib_a_SOURCES = _main.c ieee.c
-lib_a_LIBADD = $(COPYOFILES) $(COPYOMFILES) $(COPYRENAMEOFILES)
-
-$(COPYOFILES):
-	$(AR) x /lib/libc.a $(COPYOFILES) 
-
-$(COPYRENAMEOFILES):
-	$(AR) x /lib/libc.a $(COPYRENAMEFILES:S.o=.o)
-	for f in $(COPYRENAMEOFILES); do mv `basename $$f S.o`.o $$f; done
-
-$(COPYOMFILES):
-	$(AR) x /lib/libm.a $(COPYOMFILES) 
-
-all: crt0.o
-
-crt0.o:
-	cp /lib/crt0.o crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sun4/Makefile.in b/newlib/libc/sys/sun4/Makefile.in
deleted file mode 100644
index edec5f190..000000000
--- a/newlib/libc/sys/sun4/Makefile.in
+++ /dev/null
@@ -1,419 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-COPYOFILES = \
-	Ovfork.o \
-	_exit.o \
-	_sigvec.o \
-	abort.o \
-	access.o \
-	cerror.o \
-	chmod.o \
-	chown.o \
-	close.o \
-	creat.o \
-	dup.o \
-	dup2.o \
-	errlst.o \
-	execl.o \
-	execle.o \
-	execv.o \
-	execve.o \
-	execvp.o \
-	fork.o \
-	fstat.o \
-	getdtablesize.o \
-	getpid.o \
-	getrusage.o  \
-	gettimeofday.o \
-	ieee_globals.o \
-	ioctl.o \
-	isatty.o \
-	kill.o \
-	link.o \
-	lseek.o \
-	open.o \
-	pipe.o \
-	popen.o \
-	read.o \
-	sbrk.o \
-	setitimer.o \
-	sigblock.o \
-	signal.o \
-	sigpause.o \
-	sigsetjmp.o \
-	sigsetmask.o \
-	sigtramp.o \
-	sigvec.o \
-	sleep.o \
-	start_float.o \
-	stat.o \
-	time.o \
-	times.o \
-	umask.o \
-	unlink.o \
-	utime.o \
-	utimes.o \
-	wait.o \
-	wait3.o \
-	wait4.o \
-	write.o \
-	rem.o \
-	multiply.o \
-	umultiply.o
-
-
-# These files are from Sun's libc.a, but the must be renamed because they
-# conflict with other library .o's.  They are renamed to xxxS.o.
-COPYRENAMEOFILES = divS.o
-
-COPYOMFILES = ieee_flags.o
-
-lib_a_SOURCES = _main.c ieee.c
-lib_a_LIBADD = $(COPYOFILES) $(COPYOMFILES) $(COPYRENAMEOFILES)
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_DEPENDENCIES =  Ovfork.o _exit.o _sigvec.o abort.o access.o \
-cerror.o chmod.o chown.o close.o creat.o dup.o dup2.o errlst.o execl.o \
-execle.o execv.o execve.o execvp.o fork.o fstat.o getdtablesize.o \
-getpid.o getrusage.o gettimeofday.o ieee_globals.o ioctl.o isatty.o \
-kill.o link.o lseek.o open.o pipe.o popen.o read.o sbrk.o setitimer.o \
-sigblock.o signal.o sigpause.o sigsetjmp.o sigsetmask.o sigtramp.o \
-sigvec.o sleep.o start_float.o stat.o time.o times.o umask.o unlink.o \
-utime.o utimes.o wait.o wait3.o wait4.o write.o rem.o multiply.o \
-umultiply.o ieee_flags.o divS.o
-lib_a_OBJECTS =  _main.o ieee.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-$(COPYOFILES):
-	$(AR) x /lib/libc.a $(COPYOFILES) 
-
-$(COPYRENAMEOFILES):
-	$(AR) x /lib/libc.a $(COPYRENAMEFILES:S.o=.o)
-	for f in $(COPYRENAMEOFILES); do mv `basename $$f S.o`.o $$f; done
-
-$(COPYOMFILES):
-	$(AR) x /lib/libm.a $(COPYOMFILES) 
-
-all: crt0.o
-
-crt0.o:
-	cp /lib/crt0.o crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sun4/_main.c b/newlib/libc/sys/sun4/_main.c
deleted file mode 100644
index 64878088d..000000000
--- a/newlib/libc/sys/sun4/_main.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-__main()
-{
-  
-
-}
diff --git a/newlib/libc/sys/sun4/aclocal.m4 b/newlib/libc/sys/sun4/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sun4/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sun4/configure b/newlib/libc/sys/sun4/configure
deleted file mode 100755
index 79b936dfc..000000000
--- a/newlib/libc/sys/sun4/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=ieee.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sun4/configure.in b/newlib/libc/sys/sun4/configure.in
deleted file mode 100644
index b16aed354..000000000
--- a/newlib/libc/sys/sun4/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sun4 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(ieee.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sun4/ieee.c b/newlib/libc/sys/sun4/ieee.c
deleted file mode 100644
index 28289761d..000000000
--- a/newlib/libc/sys/sun4/ieee.c
+++ /dev/null
@@ -1,115 +0,0 @@
-
-#include <ieeefp.h>
-
-
-fp_rnd
-_DEFUN_VOID(fpgetround)
-{
-  char *out;
-  ieee_flags("get", "direction","", &out);
-  if (strcmp(out,"nearest") == 0) return FP_RN;  
-  if (strcmp(out,"negative") == 0) return FP_RM;  
-  if (strcmp(out,"positive") == 0) return FP_RP;  
-  if (strcmp(out,"tozero") == 0) return FP_RZ;  
-  abort();
-  
-}
-
-fp_rnd
-_DEFUN(fpsetround,(new),
-       fp_rnd new)
-{
-  fp_rnd old = fpgetround();
-  char *dummy;
-  
-  switch (new) 
-  {
-  case FP_RN:
-    ieee_flags("set", "direction", "nearest", &dummy);
-    break;
-  case FP_RM:
-    ieee_flags("set", "direction", "negative", &dummy);
-    break;
-  case FP_RP:
-    ieee_flags("set", "direction", "positive", &dummy);
-    break;
-  case FP_RZ:
-    ieee_flags("set", "direction", "tozero", &dummy);
-    break;
-  default:
-    break;
-  }
-  return old;
-}
-
-
-fp_except
-_DEFUN_VOID(fpgetmask)
-{
-  char *out;
-  int r = 0;
-
-  int i = ieee_flags("get","exception","",&out);  
-  if (i & 1) r |= FP_X_IMP;
-  if (i & 2) r |= FP_X_DX;
-  if (i & 4) r |= FP_X_UFL;
-  if (i & 8) r |= FP_X_OFL;
-  if (i & 16) r |= FP_X_INV;
-  return r;
-
-}
-
-fp_except
-_DEFUN(fpsetmask,(mask),
-       fp_except mask)
-{
-  fp_except old = fpgetmask();  
-
-  char *out;
-  ieee_flags("clear","exception", "all", &out);
-
-
-  if (mask & FP_X_IMP) 
-   ieee_flags("set","exception","inexact", &out);
-  if (mask  & FP_X_DX)
-   ieee_flags("set","exception","division", &out);
-  if (mask & FP_X_UFL)
-   ieee_flags("set","exception","underflow", &out);
-  if (mask & FP_X_OFL)
-   ieee_flags("set","exception","overflow", &out);
-  if (mask & FP_X_INV)
-   ieee_flags("set","exception","invalid", &out);
-
-  return old;
-
-}
-
-fp_except 
-_DEFUN(fpsetsticky,(mask),
-       fp_except mask)
-{
-  return fpsetmask(mask);
-}
-
-fp_except
-_DEFUN_VOID(fpgetsticky)
-{
-  return fpgetmask();
-}
-
-int
-_DEFUN(fpsetroundtoi,(rdi_mode),
-       fp_rdi rdi_mode)
-{
-  
-  return 0;
-  
-}
-
-int 
-_DEFUN_VOID(fpgetroundtoi)
-{
-  
-  return 0;
-  
-}
diff --git a/newlib/libc/sys/sun4/sys/dirent.h b/newlib/libc/sys/sun4/sys/dirent.h
deleted file mode 100644
index b7ca90b0d..000000000
--- a/newlib/libc/sys/sun4/sys/dirent.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _SYS_DIRENT_H
-# define _SYS_DIRENT_H
-
-/*
- * This file was written to be compatible with the BSD directory
- * routines, so it looks like it.  But it was written from scratch.
- * Sean Eric Fagan, sef@Kithrup.COM
- *
- * Modified by dje@cygnus.com for sun.
- */
-
-typedef struct __dirdesc {
-	int	dd_fd;
-	long	dd_loc;
-	long	dd_size;
-	long	dd_bsize;
-	long	dd_off;
-	char	*dd_buf;
-} DIR;
-
-# define __dirfd(dp)	((dp)->dd_fd)
-
-DIR *opendir (const char *);
-struct dirent *readdir (DIR *);
-void rewinddir (DIR *);
-int closedir (DIR *);
-
-#include <sys/types.h>
-
-#define MAXNAMLEN	255
-
-#define d_ino	d_fileno	/* compatibility */
-
-struct dirent {
-	off_t		d_off;
-	unsigned long	d_fileno;
-	unsigned short	d_reclen;
-	unsigned short	d_namlen;
-	char		d_name[MAXNAMLEN + 1];
-};
-
-/* FIXME: include definition of DIRSIZ() ? */
-
-#endif
diff --git a/newlib/libc/sys/sun4/sys/file.h b/newlib/libc/sys/sun4/sys/file.h
deleted file mode 100644
index 94d65c1df..000000000
--- a/newlib/libc/sys/sun4/sys/file.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* FIXME: really fcntl.h */
-
-#include <sys/fcntl.h>
diff --git a/newlib/libc/sys/sun4/sys/termios.h b/newlib/libc/sys/sun4/sys/termios.h
deleted file mode 100644
index ffdeb9bb2..000000000
--- a/newlib/libc/sys/sun4/sys/termios.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef	_SYS_TERMIOS_H
-# define _SYS_TERMIOS_H
-
-# define _XCGETA (('x'<<8)|1)
-# define _XCSETA (('x'<<8)|2)
-# define _XCSETAW (('x'<<8)|3)
-# define _XCSETAF (('x'<<8)|4)
-# define _TCSBRK (('T'<<8)|5)
-# define _TCFLSH (('T'<<8)|7)
-# define _TCXONC (('T'<<8)|6)
-
-# define TCOOFF	0
-# define TCOON	1
-# define TCIOFF	2
-# define TCION	3
-
-# define TCIFLUSH	0
-# define TCOFLUSH	1
-# define TCIOFLUSH	2
-
-# define NCCS 13
-
-# define TCSAFLUSH	_XCSETAF
-# define TCSANOW	_XCSETA
-# define TCSADRAIN	_XCSETAW
-# define TCSADFLUSH	_XCSETAF
-
-# define IGNBRK	000001
-# define BRKINT	000002
-# define IGNPAR	000004
-# define INPCK	000020
-# define ISTRIP	000040
-# define INLCR	000100
-# define IGNCR	000200
-# define ICRNL	000400
-# define IXON	002000
-# define IXOFF	010000
-
-# define OPOST	000001
-# define OCRNL	000004
-# define ONLCR	000010
-# define ONOCR	000020
-# define TAB3	014000
-
-# define CLOCAL	004000
-# define CREAD	000200
-# define CSIZE	000060
-# define CS5	0
-# define CS6	020
-# define CS7	040
-# define CS8	060
-# define CSTOPB	000100
-# define HUPCL	002000
-# define PARENB	000400
-# define PAODD	001000
-
-# define ECHO	0000010
-# define ECHOE	0000020
-# define ECHOK	0000040
-# define ECHONL	0000100
-# define ICANON	0000002
-# define IEXTEN	0000400	/* anybody know *what* this does?! */
-# define ISIG	0000001
-# define NOFLSH	0000200
-# define TOSTOP	0001000
-
-# define VEOF	4	/* also VMIN -- thanks, AT&T */
-# define VEOL	5	/* also VTIME -- thanks again */
-# define VERASE	2
-# define VINTR	0
-# define VKILL	3
-# define VMIN	4	/* also VEOF */
-# define VQUIT	1
-# define VSUSP	10
-# define VTIME	5	/* also VEOL */
-# define VSTART	11
-# define VSTOP	12
-
-# define B0	000000
-# define B50	000001
-# define B75	000002
-# define B110	000003
-# define B134	000004
-# define B150	000005
-# define B200	000006
-# define B300	000007
-# define B600	000010
-# define B1200	000011
-# define B1800	000012
-# define B2400	000013
-# define B4800	000014
-# define B9600	000015
-# define B19200	000016
-# define B38400	000017
-
-typedef unsigned char cc_t;
-typedef unsigned short tcflag_t;
-typedef char speed_t;
-
-struct termios {
-	tcflag_t	c_iflag;
-	tcflag_t	c_oflag;
-	tcflag_t	c_cflag;
-	tcflag_t	c_lflag;
-	char		c_line;
-	cc_t		c_cc[NCCS];
-	speed_t		c_ispeed;
-	speed_t		c_ospeed;
-};
-
-# ifndef _NO_MACROS
-
-#  define cfgetospeed(tp)	((tp)->c_ospeed)
-#  define cfgetispeed(tp)	((tp)->c_ispeed)
-#  define cfsetospeed(tp,s)	(((tp)->c_ospeed = (s)), 0)
-#  define cfsetispeed(tp,s)	(((tp)->c_ispeed = (s)), 0)
-#  define tcdrain(fd)		_ioctl (fd, _TCSBRK, 1)
-# endif	/* _NO_MACROS */
-
-#endif	/* _SYS_TERMIOS_H */
-
diff --git a/newlib/libc/sys/sun4/sys/utime.h b/newlib/libc/sys/sun4/sys/utime.h
deleted file mode 100644
index e2a55faff..000000000
--- a/newlib/libc/sys/sun4/sys/utime.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _SYS_UTIME_H
-# define _SYS_UTIME_H
-
-#include <time.h>
-
-struct utimbuf {
-	time_t	actime;
-	time_t	modtime;
-};
-
-#endif	/* _SYS_UTIME_H */
-
diff --git a/newlib/libc/sys/sun4/sys/utmp.h b/newlib/libc/sys/sun4/sys/utmp.h
deleted file mode 100644
index f519e6af0..000000000
--- a/newlib/libc/sys/sun4/sys/utmp.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _UTMP_H
-# define _UTMP_H
-
-#include <sys/types.h>
-
-# define UTMP_FILE "/etc/utmp"
-# define WTMP_FILE "/etc/wtmp"
-
-struct utmp {
-	char	ut_user[8];	/* how limited */
-	char	ut_id[4];	/* ditto */
-	char	ut_line[12];	/* I'm repeating myself */
-	short	ut_pid;
-	short	ut_type;
-	struct exit_status {
-		short e_termination;
-		short e_exit;
-	} ut_exit;		/* for DEAD_PROCESS processes */
-	time_t	ut_time;
-};
-
-/* Definitions for ut_type fields */
-
-# define	EMPTY	0
-# define	RUN_LVL	1
-# define	BOOT_TIME	2
-# define	OLD_TIME	3
-# define	NEW_TIME	4
-# define	INIT_PROCESS	5
-# define	LOGIN_PROCESS	6
-# define	USER_PROCESS	7
-# define	DEAD_PROCESS	8
-# define	ACCOUNTING	9
-# define	UTMAXTYPE	ACCOUNTING
-
-# define	RUNLVL_MSG	"run-level %c"
-# define	BOOT_MSG	"system boot"
-# define	OTIME_MSG	"old time"
-# define	NTIME_MSG	"new time"
-
-#endif	/* _UTMP_H */
-
-
diff --git a/newlib/libc/sys/sun4/sys/wait.h b/newlib/libc/sys/sun4/sys/wait.h
deleted file mode 100644
index 08b756aab..000000000
--- a/newlib/libc/sys/sun4/sys/wait.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* FIXME: From sys/sysvi386/sys */
-#ifndef _WAIT_H
-# define _WAIT_H
-
-# define WNOHANG 1
-# define WUNTRACED 2
-
-/*
- * Unlike the atrocity that BSD ended up using, we do not have a "union
- * wait," although I could probably implement one.  Given the code I
- * sometimes end up porting, it might be a good thing.  Anyway, the
- * format of a stat thingy, filled in by the wait*() routines, is:
- * struct {
- *    int filler:16;
- *    union {
- *        struct stopped {
- *            int signo:8;
- *            int o177:8;	// will be 0177 
- *        };
- *        struct exited {
- *            int retval:8;
- *            int zero:8;	// 0, obviously 8-)
- *        };
- *        struct termed {
- *            int zero:8;	// zeroes
- *            int corep:1;	// was there a core file?
- *            int signo:7;	// what?!  Only 127 signals?!
- *        };
- *        int value:16;
- *     };
- * };
- *
- * Braver souls than I can turn that into a union wait, if desired.  Ick.
- */
-
-# define WIFEXITED(val)	((val)&0xff)
-# define WEXITSTATUS(val)	(((val)>>8)&0xff)
-# define WIFSIGNALED(val)	((val) && !((val)&0xff))
-# define WTERMSIG(val)	(((val)>>8)&0x7f)
-# define WIFSTOPPED(val) (((val)&0xff)==0177)
-# define WSTOPSIG(val)	(((val)>>8)&0xff)
-#endif	/* _SYS_WAIT_H */
-
diff --git a/newlib/libc/sys/sysmec/Makefile.am b/newlib/libc/sys/sysmec/Makefile.am
deleted file mode 100644
index fdaa7f649..000000000
--- a/newlib/libc/sys/sysmec/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c crt1.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c lseek.c open.c pipe.c read.c \
-	sbrk.c stat.c time.c trap.S unlink.c utime.c wait.c write.c \
-	times.c gettime.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sysmec/Makefile.in b/newlib/libc/sys/sysmec/Makefile.in
deleted file mode 100644
index 0a6946c57..000000000
--- a/newlib/libc/sys/sysmec/Makefile.in
+++ /dev/null
@@ -1,337 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c crt1.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c lseek.c open.c pipe.c read.c \
-	sbrk.c stat.c time.c trap.S unlink.c utime.c wait.c write.c \
-	times.c gettime.c
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  _exit.o access.o chmod.o chown.o close.o creat.o crt1.o \
-execv.o execve.o fork.o fstat.o getpid.o isatty.o kill.o lseek.o open.o \
-pipe.o read.o sbrk.o stat.o time.o trap.o unlink.o utime.o wait.o \
-write.o times.o gettime.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sysmec/_exit.c b/newlib/libc/sys/sysmec/_exit.c
deleted file mode 100644
index bf7e2866b..000000000
--- a/newlib/libc/sys/sysmec/_exit.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-static void _do_dtors()
-{
-  /* The loop variable is static so that if a destructor calls exit, 
-     and we return here, we simply continue with the next destructor. */
-  typedef void (*pfunc) ();
-  extern pfunc __dtors[];
-  extern pfunc __dtors_end[];
-  static pfunc *p = __dtors;
-  
-  while (p < __dtors_end)
-    (*p++) ();
-}
-
-
-void _exit (n)
-{
-  /* Destructors should be done earlier because they need to be done before the
-     files are closed, but here is better than nowhere (and this balances the
-     constructors done in crt1.c. */
-  _do_dtors();
-
-  TRAP0 (SYS_exit, n, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/access.c b/newlib/libc/sys/sysmec/access.c
deleted file mode 100644
index 8e08b3a7f..000000000
--- a/newlib/libc/sys/sysmec/access.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* This is file ACCESS.C */
-/*
- * Copyright (C) 1993 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-int access(const char *fn, int flags)
-{
-  struct stat s;
-  if (stat(fn, &s))
-    return -1;
-  if (s.st_mode & S_IFDIR)
-    return 0;
-  if (flags & W_OK)
-  {
-    if (s.st_mode & S_IWRITE)
-      return 0;
-    return -1;
-  }
-  return 0;
-}
-	
diff --git a/newlib/libc/sys/sysmec/aclocal.m4 b/newlib/libc/sys/sysmec/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sysmec/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sysmec/chmod.c b/newlib/libc/sys/sysmec/chmod.c
deleted file mode 100644
index 181460415..000000000
--- a/newlib/libc/sys/sysmec/chmod.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-chmod (const char *path, mode_t mode)
-{
-  return TRAP0 (SYS_chmod, path, mode, 0);
-}
diff --git a/newlib/libc/sys/sysmec/chown.c b/newlib/libc/sys/sysmec/chown.c
deleted file mode 100644
index 5b083f1db..000000000
--- a/newlib/libc/sys/sysmec/chown.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-
-int
-chown (const char *path, short owner, short group)
-{
-  return TRAP0 (SYS_chown, path, owner, group);
-}
diff --git a/newlib/libc/sys/sysmec/close.c b/newlib/libc/sys/sysmec/close.c
deleted file mode 100644
index 323c74ac5..000000000
--- a/newlib/libc/sys/sysmec/close.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_close (int file)
-{
-  return TRAP0 (SYS_close, file, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/configure b/newlib/libc/sys/sysmec/configure
deleted file mode 100755
index 7944b3353..000000000
--- a/newlib/libc/sys/sysmec/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt1.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sysmec/configure.in b/newlib/libc/sys/sysmec/configure.in
deleted file mode 100644
index 39673d20c..000000000
--- a/newlib/libc/sys/sysmec/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sysmec configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt1.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sysmec/creat.c b/newlib/libc/sys/sysmec/creat.c
deleted file mode 100644
index fce9bc31c..000000000
--- a/newlib/libc/sys/sysmec/creat.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-creat (const char *path,
-	int mode)
-{
-  return TRAP0 (SYS_creat, path, mode, 0);
-}
diff --git a/newlib/libc/sys/sysmec/crt0.S b/newlib/libc/sys/sysmec/crt0.S
deleted file mode 100644
index ca7c88fe6..000000000
--- a/newlib/libc/sys/sysmec/crt0.S
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifdef __mn10300__
-	.section .text
-	.global	_start
-_start:
-	mov _stack-8,a0		# Load up the stack pointer
-	mov a0,sp
-
-	mov _edata,a0		# Get the start/end of bss
-	mov _end,a1
-
-	cmp a0,a1		# If no bss, then do nothing
-	beq .L0
-
-	clr d0			# clear d0
-
-.L1:
-	movbu d0,(a0)		# Clear a byte and bump pointer
-	inc a0
-	cmp a0,a1
-	bne .L1
-
-.L0:
-	call ___main,[],0	# Call __main to run ctors/dtors
-	clr d0
-	clr d1
-	mov d0,(4,sp)
-	call _main,[],0		# Call main program
-	call _exit,[],0		# All done, no need to return or
-				# deallocate our stack.
-
-	.section ._stack
-_stack:	.long 	1
-#else
-	.section .text
-	.global	_start
-_start:
-	mov _stack-4,a3		# Load up the stack pointer and allocate
-				# our current frame.
-
-	mov _edata,a0		# Get the start/end of bss
-	mov _end,a1
-
-	cmp a0,a1		# If no bss, then do nothing
-	beqx .L0
-
-	sub d0,d0		# clear d0
-
-.L1:
-	movb d0,(a0)		# Clear a byte and bump pointer
-	add 1,a0
-	cmp a0,a1
-	bnex .L1
-
-.L0:
-	jsr ___main
-	sub d0,d0
-	mov d0,d1
-	mov d0,(a3)
-	jsr _main		# Call main program
-	jmp _exit		# All done, no need to return or
-				# deallocate our stack.
-
-	.section ._stack
-_stack:	.long 	1
-#endif
diff --git a/newlib/libc/sys/sysmec/crt1.c b/newlib/libc/sys/sysmec/crt1.c
deleted file mode 100644
index dd0be3145..000000000
--- a/newlib/libc/sys/sysmec/crt1.c
+++ /dev/null
@@ -1,16 +0,0 @@
-void __main ()
-{
-  static int initialized;
-  if (! initialized)
-    {
-      typedef void (*pfunc) ();
-      extern pfunc __ctors[];
-      extern pfunc __ctors_end[];
-      pfunc *p;
-
-      initialized = 1;
-      for (p = __ctors_end; p > __ctors; )
-	(*--p) ();
-
-    }
-}
diff --git a/newlib/libc/sys/sysmec/execv.c b/newlib/libc/sys/sysmec/execv.c
deleted file mode 100644
index 6665721c0..000000000
--- a/newlib/libc/sys/sysmec/execv.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-execv (const char *path, char *const argv[])
-{
-  return TRAP0 (SYS_execv, path, argv, 0);
-}
diff --git a/newlib/libc/sys/sysmec/execve.c b/newlib/libc/sys/sysmec/execve.c
deleted file mode 100644
index a0d64c233..000000000
--- a/newlib/libc/sys/sysmec/execve.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_execve (const char *path, char *const argv[], char *const envp[])
-{
-  return TRAP0 (SYS_execve, path, argv, envp);
-}
diff --git a/newlib/libc/sys/sysmec/fork.c b/newlib/libc/sys/sysmec/fork.c
deleted file mode 100644
index 1aab32445..000000000
--- a/newlib/libc/sys/sysmec/fork.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_fork ()
-{
-  return TRAP0 (SYS_fork, 0, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/fstat.c b/newlib/libc/sys/sysmec/fstat.c
deleted file mode 100644
index 261b1449b..000000000
--- a/newlib/libc/sys/sysmec/fstat.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  st->st_blksize = 4096;
-  return 0;
-}
diff --git a/newlib/libc/sys/sysmec/getpid.c b/newlib/libc/sys/sysmec/getpid.c
deleted file mode 100644
index 070382e75..000000000
--- a/newlib/libc/sys/sysmec/getpid.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-_getpid (n)
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/sysmec/gettime.c b/newlib/libc/sys/sysmec/gettime.c
deleted file mode 100644
index 69250b12c..000000000
--- a/newlib/libc/sys/sysmec/gettime.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/time.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_gettimeofday (struct timeval *tp, void *tzp)
-{
-  return TRAP0 (SYS_gettimeofday, tp, tzp, 0);
-}
diff --git a/newlib/libc/sys/sysmec/isatty.c b/newlib/libc/sys/sysmec/isatty.c
deleted file mode 100644
index 3ea99863d..000000000
--- a/newlib/libc/sys/sysmec/isatty.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-isatty (fd)
-     int fd;
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/sysmec/kill.c b/newlib/libc/sys/sysmec/kill.c
deleted file mode 100644
index 638132fed..000000000
--- a/newlib/libc/sys/sysmec/kill.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-_kill (n, m)
-{
-  return TRAP0 (SYS_exit, 0xdead, 0, 0);
-}
-
diff --git a/newlib/libc/sys/sysmec/lseek.c b/newlib/libc/sys/sysmec/lseek.c
deleted file mode 100644
index dad6c39a8..000000000
--- a/newlib/libc/sys/sysmec/lseek.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/unistd.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-off_t
-_lseek (int file,
-	off_t ptr,
-	int dir)
-{
-  return TRAP0 (SYS_lseek, file, ptr, dir);
-}
diff --git a/newlib/libc/sys/sysmec/open.c b/newlib/libc/sys/sysmec/open.c
deleted file mode 100644
index 0a9dbb04c..000000000
--- a/newlib/libc/sys/sysmec/open.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_open (const char *path,
-	int flags)
-{
-  return TRAP0 (SYS_open, path, flags, 0);
-}
diff --git a/newlib/libc/sys/sysmec/pipe.c b/newlib/libc/sys/sysmec/pipe.c
deleted file mode 100644
index 4c0078067..000000000
--- a/newlib/libc/sys/sysmec/pipe.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-pipe (int *fd)
-{
-  return TRAP0 (SYS_pipe, fd, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/read.c b/newlib/libc/sys/sysmec/read.c
deleted file mode 100644
index eae084a6e..000000000
--- a/newlib/libc/sys/sysmec/read.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-_read (int file,
-       char *ptr,
-       size_t len)
-{
-  return TRAP0 (SYS_read, file, ptr, len);
-}
diff --git a/newlib/libc/sys/sysmec/sbrk.c b/newlib/libc/sys/sysmec/sbrk.c
deleted file mode 100644
index 80cb431f6..000000000
--- a/newlib/libc/sys/sysmec/sbrk.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-caddr_t
-_sbrk (size_t incr)
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-#if 0
-  char *sp = (char *)stack_ptr;
-#else
-  char *sp = (char *)&sp;
-#endif
-
-  if (heap_end == 0)
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > sp)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
diff --git a/newlib/libc/sys/sysmec/stat.c b/newlib/libc/sys/sysmec/stat.c
deleted file mode 100644
index 11bbe8e30..000000000
--- a/newlib/libc/sys/sysmec/stat.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  return TRAP0 (SYS_stat, path, st, 0);
-}
diff --git a/newlib/libc/sys/sysmec/sys/syscall.h b/newlib/libc/sys/sysmec/sys/syscall.h
deleted file mode 100644
index f301ea0ee..000000000
--- a/newlib/libc/sys/sysmec/sys/syscall.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#define	SYS_exit	1
-#define	SYS_fork	2
-
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
-#define	SYS_stat	38
-
-
-#define	SYS_pipe	42
-#define	SYS_execve	59
-#define   SYS_times       43
-#define SYS_gettimeofday 116
-
-#define SYS_utime       201 /* not really a system call */
-#define SYS_wait        202 /* nor is this */
-
diff --git a/newlib/libc/sys/sysmec/time.c b/newlib/libc/sys/sysmec/time.c
deleted file mode 100644
index bde056eba..000000000
--- a/newlib/libc/sys/sysmec/time.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-time_t
-time (time_t *tloc)
-{
-  return TRAP0 (SYS_time, tloc, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/times.c b/newlib/libc/sys/sysmec/times.c
deleted file mode 100644
index 3555fd6a4..000000000
--- a/newlib/libc/sys/sysmec/times.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/times.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-clock_t
-times (struct tms *buffer)
-{
-  return TRAP0 (SYS_times, buffer, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/trap.S b/newlib/libc/sys/sysmec/trap.S
deleted file mode 100644
index 911c02dbc..000000000
--- a/newlib/libc/sys/sysmec/trap.S
+++ /dev/null
@@ -1,13 +0,0 @@
-	.text
-	.global	___trap0
-___trap0:
-	syscall
-	cmp 0,d0
-	beq .L0
-	mov d0,(_errno)
-.L0:
-#ifdef __mn10300__
-	rets
-#else
-	rts
-#endif
diff --git a/newlib/libc/sys/sysmec/unlink.c b/newlib/libc/sys/sysmec/unlink.c
deleted file mode 100644
index debd806a9..000000000
--- a/newlib/libc/sys/sysmec/unlink.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_unlink ()
-{
-  return -1;
-}
diff --git a/newlib/libc/sys/sysmec/utime.c b/newlib/libc/sys/sysmec/utime.c
deleted file mode 100644
index 8d3e35977..000000000
--- a/newlib/libc/sys/sysmec/utime.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-utime (path, times)
-     const char *path;
-     char *times;
-{
-  return TRAP0 (SYS_utime, path, times, 0);
-}
diff --git a/newlib/libc/sys/sysmec/wait.c b/newlib/libc/sys/sysmec/wait.c
deleted file mode 100644
index 2e5cb6bad..000000000
--- a/newlib/libc/sys/sysmec/wait.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_wait (statusp)
-     int *statusp;
-{
-  return TRAP0 (SYS_wait, 0, 0, 0);
-}
diff --git a/newlib/libc/sys/sysmec/write.c b/newlib/libc/sys/sysmec/write.c
deleted file mode 100644
index 78fd64f22..000000000
--- a/newlib/libc/sys/sysmec/write.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 ();
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3))
-
-int
-_write ( int file,
-	 char *ptr,
-	 size_t len)
-{
-  return TRAP0 (SYS_write, file, ptr, len);
-}
diff --git a/newlib/libc/sys/sysnec810/Makefile.am b/newlib/libc/sys/sysnec810/Makefile.am
deleted file mode 100644
index 018895432..000000000
--- a/newlib/libc/sys/sysnec810/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = io.s write.c sbrk.c misc.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sysnec810/Makefile.in b/newlib/libc/sys/sysnec810/Makefile.in
deleted file mode 100644
index 33636350a..000000000
--- a/newlib/libc/sys/sysnec810/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = io.s write.c sbrk.c misc.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  io.o write.o sbrk.o misc.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sysnec810/aclocal.m4 b/newlib/libc/sys/sysnec810/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sysnec810/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sysnec810/configure b/newlib/libc/sys/sysnec810/configure
deleted file mode 100755
index ecbe0da7a..000000000
--- a/newlib/libc/sys/sysnec810/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=io.s
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sysnec810/configure.in b/newlib/libc/sys/sysnec810/configure.in
deleted file mode 100644
index 483662c7a..000000000
--- a/newlib/libc/sys/sysnec810/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sysnec810 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(io.s)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sysnec810/crt0.s b/newlib/libc/sys/sysnec810/crt0.s
deleted file mode 100644
index 3c7a382ff..000000000
--- a/newlib/libc/sys/sysnec810/crt0.s
+++ /dev/null
@@ -1,22 +0,0 @@
-        .set    STACKTOP, 0x100000
-
-        .extern __tp_TEXT, 4
-        .extern __gp_DATA, 4
-        .extern _main
-        .globl  __start
-        .globl  _exit
-        .globl  __exit
-
-        .text
-__start:
-        mov     2, r10                  -- set Cache Control Word
-        ldsr    r10, 24                 --
-#
-        mov     STACKTOP, sp            -- set stack pointer
-        mov     #__tp_TEXT, tp          -- set tp register
-        mov     #__gp_DATA, gp          -- set gp register offset
-        add     tp, gp                  -- set gp register
-        jal     _main                   -- call main function
-__exit:
-	halt				-- end of the program
-
diff --git a/newlib/libc/sys/sysnec810/io.s b/newlib/libc/sys/sysnec810/io.s
deleted file mode 100644
index f85975a1f..000000000
--- a/newlib/libc/sys/sysnec810/io.s
+++ /dev/null
@@ -1,41 +0,0 @@
-#	V800 Series Assembler Source File created by cxx732 
-	.data
-	.sdata
-	.bss
-	.sbss
-	.text
-	#@(#)V800 Series Assembly Code Improver E1.50c [16 Jul 93]
-	#@(#)V800 Series Assembly Code Generator E1.00f'[25 Nov 93]
-	#@(#)V800 Series Optic Optimizer E1.00e [13 Jul 93]
-	#@(#)optimized at Wed May 11 13:37:07 1994
-	#@(#)option:_R_xcedfgbhjqkn___s____T:
-	#@(#)V800 Series Optic Inliner E1.00c [14 Jul 93]
-	#@(#)V800 Series Optic Merger E1.00b [15 Jul 93]
-	#@(#)V800 Series Optimizing C Compiler Frontend E1.00j [26 Feb 94]
-	.file	"/sethra/death/sef/v810/devo/newlib/libc/sys/v810/io.c"
-	#@(#) fsort : -N8192 -G512 -C1024 -q -e -a -d 
-	.align	4
-	.frame	__inb, .F2
-	.globl	__inb
-__inb:
-	add	-.F2, sp
-	in.b	[r6],r10
-	andi	0xff, r10, r10
-	add	.F2, sp
-	jmp	[lp]
-	.set	.F2, 0x8
-	.set	.A2, 0x4
-	.set	.T2, 0x0
-	.align	4
-	.frame	__outb, .F3
-	.globl	__outb
-__outb:
-	andi	0xff, r7, r10
-	out.b	r10,[r6]
-	jmp	[lp]
-	.set	.F3, 0x0
-	.set	.A3, 0x0
-	.set	.T3, 0x0
-	.vline
-	.vdebug
-	.vdbstrtab
diff --git a/newlib/libc/sys/sysnec810/misc.c b/newlib/libc/sys/sysnec810/misc.c
deleted file mode 100644
index f44c03d51..000000000
--- a/newlib/libc/sys/sysnec810/misc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-extern int _write (int, void*, unsigned int);
-
-int
-_open() {
-  return -1;
-}
-
-int
-_close() {
-  return -1;
-}
-
-int
-_lseek() {
-  return 0;
-}
-
-int
-_read() {
-  return 0;
-}
-
-int
-isatty() {
-  return 1;
-}
-
-int
-_DEFUN(_fstat,(file, st),
-       int file _AND
-       struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
diff --git a/newlib/libc/sys/sysnec810/sbrk.c b/newlib/libc/sys/sysnec810/sbrk.c
deleted file mode 100644
index b1cf4a781..000000000
--- a/newlib/libc/sys/sysnec810/sbrk.c
+++ /dev/null
@@ -1,12 +0,0 @@
-extern int _end;
-
-static char *end_of_data = (char *) &_end;
-
-char *
-_sbrk (int delta) {
-	char *ptr = end_of_data;
-
-	end_of_data += delta;
-	return ptr;
-}
-
diff --git a/newlib/libc/sys/sysnec810/write.c b/newlib/libc/sys/sysnec810/write.c
deleted file mode 100644
index 96c1e49ce..000000000
--- a/newlib/libc/sys/sysnec810/write.c
+++ /dev/null
@@ -1,36 +0,0 @@
-static volatile char *data = (char *)(0x20);
-static volatile char *control = (char *)(0x24);
-
-extern void _outb (volatile char*, unsigned char);
-extern unsigned char _inb (volatile char*);
-
-static unsigned char
- read_scc_reg (unsigned char n)
-{
-  _outb (control, n);
-  return _inb(control);
-}
-
-static void write_scc_data (unsigned char n)
-{
-  _outb (data, n);
-}
-
-int
-_write (int dev, void *buf, unsigned int len)
-{
-  int i;
-  char *string = (char*)buf;
-
-  for (i = 0; i < len; i++) 
-    {
-      int j;
-
-      for (j = 0 ; j < 5000; j++)
-	;
-      write_scc_data (string[i]);
-
-    }
-  return len;
-}
-
diff --git a/newlib/libc/sys/sysnecv850/Makefile.am b/newlib/libc/sys/sysnecv850/Makefile.am
deleted file mode 100644
index 2c74d173d..000000000
--- a/newlib/libc/sys/sysnecv850/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	_exit.c access.c chmod.c chown.c close.c creat.c crt1.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c lseek.c open.c pipe.c read.c link.c \
-	sbrk.c stat.c time.c trap.S unlink.c utime.c wait.c write.c \
-	times.c gettime.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sysnecv850/Makefile.in b/newlib/libc/sys/sysnecv850/Makefile.in
deleted file mode 100644
index 1b731da2e..000000000
--- a/newlib/libc/sys/sysnecv850/Makefile.in
+++ /dev/null
@@ -1,338 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	_exit.c access.c chmod.c chown.c close.c creat.c crt1.c \
-	execv.c execve.c fork.c fstat.c getpid.c isatty.c \
-	kill.c lseek.c open.c pipe.c read.c link.c \
-	sbrk.c stat.c time.c trap.S unlink.c utime.c wait.c write.c \
-	times.c gettime.c
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  _exit.o access.o chmod.o chown.o close.o creat.o crt1.o \
-execv.o execve.o fork.o fstat.o getpid.o isatty.o kill.o lseek.o open.o \
-pipe.o read.o link.o sbrk.o stat.o time.o trap.o unlink.o utime.o \
-wait.o write.o times.o gettime.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sysnecv850/_exit.c b/newlib/libc/sys/sysnecv850/_exit.c
deleted file mode 100644
index b45ae96c8..000000000
--- a/newlib/libc/sys/sysnecv850/_exit.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-static void _do_dtors()
-{
-  /* The loop variable is static so that if a destructor calls exit, 
-     and we return here, we simply continue with the next destructor. */
-  typedef void (*pfunc) ();
-  extern pfunc __dtors[];
-  extern pfunc __dtors_end[];
-  static pfunc *p = __dtors;
-  
-  while (p < __dtors_end)
-    (*p++) ();
-}
-
-
-void _exit (n)
-{
-  /* Destructors should be done earlier because they need to be done before the
-     files are closed, but here is better than nowhere (and this balances the
-     constructors done in crt1.c. */
-  _do_dtors();
-
-  TRAP0 (SYS_exit, n, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/access.c b/newlib/libc/sys/sysnecv850/access.c
deleted file mode 100644
index 8e08b3a7f..000000000
--- a/newlib/libc/sys/sysnecv850/access.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* This is file ACCESS.C */
-/*
- * Copyright (C) 1993 DJ Delorie
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms is permitted
- * provided that the above copyright notice and following paragraph are
- * duplicated in all such forms.
- *
- * This file is distributed WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-int access(const char *fn, int flags)
-{
-  struct stat s;
-  if (stat(fn, &s))
-    return -1;
-  if (s.st_mode & S_IFDIR)
-    return 0;
-  if (flags & W_OK)
-  {
-    if (s.st_mode & S_IWRITE)
-      return 0;
-    return -1;
-  }
-  return 0;
-}
-	
diff --git a/newlib/libc/sys/sysnecv850/aclocal.m4 b/newlib/libc/sys/sysnecv850/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sysnecv850/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sysnecv850/chmod.c b/newlib/libc/sys/sysnecv850/chmod.c
deleted file mode 100644
index c86e5c902..000000000
--- a/newlib/libc/sys/sysnecv850/chmod.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-chmod (const char *path, mode_t mode)
-{
-  return TRAP0 (SYS_chmod, path, mode, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/chown.c b/newlib/libc/sys/sysnecv850/chown.c
deleted file mode 100644
index 0344d77a9..000000000
--- a/newlib/libc/sys/sysnecv850/chown.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-chown (const char *path, short owner, short group)
-{
-  return TRAP0 (SYS_chown, path, owner, group);
-}
diff --git a/newlib/libc/sys/sysnecv850/close.c b/newlib/libc/sys/sysnecv850/close.c
deleted file mode 100644
index 3c62f68e2..000000000
--- a/newlib/libc/sys/sysnecv850/close.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_close (int file)
-{
-  return TRAP0 (SYS_close, file, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/configure b/newlib/libc/sys/sysnecv850/configure
deleted file mode 100755
index 7944b3353..000000000
--- a/newlib/libc/sys/sysnecv850/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt1.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sysnecv850/configure.in b/newlib/libc/sys/sysnecv850/configure.in
deleted file mode 100644
index 0bb0a1f85..000000000
--- a/newlib/libc/sys/sysnecv850/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sysnecv850 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt1.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sysnecv850/creat.c b/newlib/libc/sys/sysnecv850/creat.c
deleted file mode 100644
index 8d468a68c..000000000
--- a/newlib/libc/sys/sysnecv850/creat.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-creat (const char *path,
-	int mode)
-{
-  return TRAP0 (SYS_creat, path, mode, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/crt0.S b/newlib/libc/sys/sysnecv850/crt0.S
deleted file mode 100644
index e006871b3..000000000
--- a/newlib/libc/sys/sysnecv850/crt0.S
+++ /dev/null
@@ -1,67 +0,0 @@
-# NEC V850 startup code
-
-	.section .text
-	.global	_start
-
-_start:
-
-#if defined __v850e__
-	
-	movea   255,		r0,	r20
-	mov     65535,		r21
-	mov     hilo(_stack),	sp
-	mov     hilo(__ep),	ep
-	mov     hilo(__gp),	gp
-	mov     hilo(__ctbp),	r6
-	ldsr    r6,             ctbp
-	mov     hilo(_edata),	r6
-	mov     hilo(_end),	r7
-.L0:
-	st.w    r0,		0[r6]
-	addi    4,		r6,	r6
-	cmp     r7,		r6
-	bl      .L0
-.L1:
-	jarl    ___main,	r31
-	addi    -16,		sp,	sp
-	mov     0,		r6
-	mov     0,		r7
-	mov     0,		r8
-	jarl    _main,		r31
-	mov     r10,		r6
-	jarl    _exit,		r31
-
-# else
-	movea   255,		r0,	r20
-	mov     r0,		r21
-	ori     65535,		r0,	r21
-	movhi   hi(_stack),	r0,	sp
-	movea   lo(_stack),	sp,	sp
-	movhi   hi(__ep),	r0,	ep
-	movea   lo(__ep),	ep,	ep
-	movhi   hi(__gp),	r0,	gp
-	movea   lo(__gp),	gp,	gp
-
-	movhi   hi(_edata),	r0,	r6
-	movea   lo(_edata),	r6,	r6
-	movhi   hi(_end),	r0,	r7
-	movea   lo(_end),	r7,	r7
-.L0:
-	st.b    r0,		0[r6]
-	addi    1,		r6,	r6
-	cmp     r7,		r6
-	bl      .L0
-.L1:
-	jarl    ___main,	r31
-	addi    -16,		sp,	sp
-	mov     0,		r6
-	mov     0,		r7
-	mov     0,		r8
-	jarl    _main,		r31
-	mov     r10,		r6
-	jarl    _exit,		r31
-
-# endif
-
-	.section .stack
-_stack:	.long 	1
diff --git a/newlib/libc/sys/sysnecv850/crt1.c b/newlib/libc/sys/sysnecv850/crt1.c
deleted file mode 100644
index dd0be3145..000000000
--- a/newlib/libc/sys/sysnecv850/crt1.c
+++ /dev/null
@@ -1,16 +0,0 @@
-void __main ()
-{
-  static int initialized;
-  if (! initialized)
-    {
-      typedef void (*pfunc) ();
-      extern pfunc __ctors[];
-      extern pfunc __ctors_end[];
-      pfunc *p;
-
-      initialized = 1;
-      for (p = __ctors_end; p > __ctors; )
-	(*--p) ();
-
-    }
-}
diff --git a/newlib/libc/sys/sysnecv850/execv.c b/newlib/libc/sys/sysnecv850/execv.c
deleted file mode 100644
index 5286be68b..000000000
--- a/newlib/libc/sys/sysnecv850/execv.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-execv (const char *path, char *const argv[])
-{
-  return TRAP0 (SYS_execv, path, argv, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/execve.c b/newlib/libc/sys/sysnecv850/execve.c
deleted file mode 100644
index b8d97f914..000000000
--- a/newlib/libc/sys/sysnecv850/execve.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_execve (const char *path, char *const argv[], char *const envp[])
-{
-  return TRAP0 (SYS_execve, path, argv, envp);
-}
diff --git a/newlib/libc/sys/sysnecv850/fork.c b/newlib/libc/sys/sysnecv850/fork.c
deleted file mode 100644
index 116116c1b..000000000
--- a/newlib/libc/sys/sysnecv850/fork.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_fork ()
-{
-  return TRAP0 (SYS_fork, 0, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/fstat.c b/newlib/libc/sys/sysnecv850/fstat.c
deleted file mode 100644
index e8783b376..000000000
--- a/newlib/libc/sys/sysnecv850/fstat.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
diff --git a/newlib/libc/sys/sysnecv850/getpid.c b/newlib/libc/sys/sysnecv850/getpid.c
deleted file mode 100644
index 18fd1494e..000000000
--- a/newlib/libc/sys/sysnecv850/getpid.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-_getpid (n)
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/sysnecv850/gettime.c b/newlib/libc/sys/sysnecv850/gettime.c
deleted file mode 100644
index fc47532a0..000000000
--- a/newlib/libc/sys/sysnecv850/gettime.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/time.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_gettimeofday (struct timeval *tp, void *tzp)
-{
-  return TRAP0 (SYS_gettimeofday, tp, tzp, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/isatty.c b/newlib/libc/sys/sysnecv850/isatty.c
deleted file mode 100644
index e5361559f..000000000
--- a/newlib/libc/sys/sysnecv850/isatty.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-isatty (fd)
-     int fd;
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/sysnecv850/kill.c b/newlib/libc/sys/sysnecv850/kill.c
deleted file mode 100644
index b8e53955a..000000000
--- a/newlib/libc/sys/sysnecv850/kill.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include <reent.h>
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-_kill (pid, sig)
-     pid_t pid;
-     int sig;
-{
-  return TRAP0 (SYS_exit, 0xdead0000 | sig, 0, 0);
-}
-
diff --git a/newlib/libc/sys/sysnecv850/link.c b/newlib/libc/sys/sysnecv850/link.c
deleted file mode 100644
index 9776d7993..000000000
--- a/newlib/libc/sys/sysnecv850/link.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_link ()
-{
-  return -1;
-}
diff --git a/newlib/libc/sys/sysnecv850/lseek.c b/newlib/libc/sys/sysnecv850/lseek.c
deleted file mode 100644
index b5d3ef0c2..000000000
--- a/newlib/libc/sys/sysnecv850/lseek.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_lseek (int file,
-	int ptr,
-	int dir)
-{
-  return TRAP0 (SYS_lseek, file, ptr, dir);
-}
diff --git a/newlib/libc/sys/sysnecv850/open.c b/newlib/libc/sys/sysnecv850/open.c
deleted file mode 100644
index 96616e528..000000000
--- a/newlib/libc/sys/sysnecv850/open.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_open (const char *path,
-	int flags)
-{
-  return TRAP0 (SYS_open, path, flags, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/pipe.c b/newlib/libc/sys/sysnecv850/pipe.c
deleted file mode 100644
index 494a99e36..000000000
--- a/newlib/libc/sys/sysnecv850/pipe.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-pipe (int *fd)
-{
-  return TRAP0 (SYS_pipe, fd, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/read.c b/newlib/libc/sys/sysnecv850/read.c
deleted file mode 100644
index ec064cbb2..000000000
--- a/newlib/libc/sys/sysnecv850/read.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-_read (int file,
-       char *ptr,
-       int len)
-{
-  return TRAP0 (SYS_read, file, ptr, len);
-}
diff --git a/newlib/libc/sys/sysnecv850/sbrk.c b/newlib/libc/sys/sysnecv850/sbrk.c
deleted file mode 100644
index b41370595..000000000
--- a/newlib/libc/sys/sysnecv850/sbrk.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-caddr_t
-_sbrk (int incr)
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-#if 0
-  char *sp = (char *)stack_ptr;
-#else
-  char *sp = (char *)&sp;
-#endif
-
-  if (heap_end == 0)
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > sp)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
diff --git a/newlib/libc/sys/sysnecv850/stat.c b/newlib/libc/sys/sysnecv850/stat.c
deleted file mode 100644
index dc8351e1a..000000000
--- a/newlib/libc/sys/sysnecv850/stat.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  return TRAP0 (SYS_stat, path, st, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/sys/syscall.h b/newlib/libc/sys/sysnecv850/sys/syscall.h
deleted file mode 100644
index f301ea0ee..000000000
--- a/newlib/libc/sys/sysnecv850/sys/syscall.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#define	SYS_exit	1
-#define	SYS_fork	2
-
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
-#define	SYS_stat	38
-
-
-#define	SYS_pipe	42
-#define	SYS_execve	59
-#define   SYS_times       43
-#define SYS_gettimeofday 116
-
-#define SYS_utime       201 /* not really a system call */
-#define SYS_wait        202 /* nor is this */
-
diff --git a/newlib/libc/sys/sysnecv850/time.c b/newlib/libc/sys/sysnecv850/time.c
deleted file mode 100644
index d0dc93f8a..000000000
--- a/newlib/libc/sys/sysnecv850/time.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-time_t
-time (time_t *tloc)
-{
-  return TRAP0 (SYS_time, tloc, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/times.c b/newlib/libc/sys/sysnecv850/times.c
deleted file mode 100644
index a558267fe..000000000
--- a/newlib/libc/sys/sysnecv850/times.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-#include "sys/times.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-clock_t
-_times (struct tms *buffer)
-{
-  return TRAP0 (SYS_times, buffer, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/trap.S b/newlib/libc/sys/sysnecv850/trap.S
deleted file mode 100644
index 9955572a3..000000000
--- a/newlib/libc/sys/sysnecv850/trap.S
+++ /dev/null
@@ -1,10 +0,0 @@
-	.text
-	.global	___trap0
-___trap0:
-	trap 31
-	tst r10,r10
-	bz .L0
-	movhi hi(_errno),r0,r6
-	st.w r10,lo(_errno)[r6]
-.L0:
-	jmp [r31]
diff --git a/newlib/libc/sys/sysnecv850/unlink.c b/newlib/libc/sys/sysnecv850/unlink.c
deleted file mode 100644
index c6261d3eb..000000000
--- a/newlib/libc/sys/sysnecv850/unlink.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_unlink ()
-{
-  return -1;
-}
diff --git a/newlib/libc/sys/sysnecv850/utime.c b/newlib/libc/sys/sysnecv850/utime.c
deleted file mode 100644
index ea1f78993..000000000
--- a/newlib/libc/sys/sysnecv850/utime.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-utime (path, times)
-     const char *path;
-     char *times;
-{
-  return TRAP0 (SYS_utime, path, times, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/wait.c b/newlib/libc/sys/sysnecv850/wait.c
deleted file mode 100644
index d8c96f05b..000000000
--- a/newlib/libc/sys/sysnecv850/wait.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_wait (statusp)
-     int *statusp;
-{
-  return TRAP0 (SYS_wait, 0, 0, 0);
-}
diff --git a/newlib/libc/sys/sysnecv850/write.c b/newlib/libc/sys/sysnecv850/write.c
deleted file mode 100644
index 136ac9ec8..000000000
--- a/newlib/libc/sys/sysnecv850/write.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-
-int errno;
-
-int __trap0 (int function, int p1, int p2, int p3);
-
-#define TRAP0(f, p1, p2, p3) __trap0(f, (int)(p1), (int)(p2), (int)(p3))
-
-int
-_write ( int file,
-	 char *ptr,
-	 int len)
-{
-  return TRAP0 (SYS_write, file, ptr, len);
-}
diff --git a/newlib/libc/sys/sysvi386/Makefile.am b/newlib/libc/sys/sysvi386/Makefile.am
deleted file mode 100644
index 91c8d69a6..000000000
--- a/newlib/libc/sys/sysvi386/Makefile.am
+++ /dev/null
@@ -1,23 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	ioctl.s isatty.c read.s lseek.s close.s sbrk.c fstat.s cerror.s \
-	_exit.s write.s open.s signal.s kill.s getpid.s brk.s fork.s wait.s \
-	execve.s exec.c utime.s fcntl.s chmod.s getuid.s getgid.s time.s \
-	stat.s link.s unlink.s rename.s mkdir.s rmdir.s sigaction.s \
-	sigprocmask.s waitpid.s sysconf.s pathconf.s fpathconf.s \
-	getdents.s opendir.c readdir.c rewinddir.c closedir.c pipe.s \
-	getgroups.s setuid.s getuid.s setgid.s geteuid.s getegid.s \
-	chdir.s dup2.c dup.c tcgetattr.c tcsetattr.c speed.c tcline.c \
-	times.s pause.s sleep.c alarm.s access.s _longjmp.s _setjmp.s
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sysvi386/Makefile.in b/newlib/libc/sys/sysvi386/Makefile.in
deleted file mode 100644
index 382948e7d..000000000
--- a/newlib/libc/sys/sysvi386/Makefile.in
+++ /dev/null
@@ -1,347 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = \
-	ioctl.s isatty.c read.s lseek.s close.s sbrk.c fstat.s cerror.s \
-	_exit.s write.s open.s signal.s kill.s getpid.s brk.s fork.s wait.s \
-	execve.s exec.c utime.s fcntl.s chmod.s getuid.s getgid.s time.s \
-	stat.s link.s unlink.s rename.s mkdir.s rmdir.s sigaction.s \
-	sigprocmask.s waitpid.s sysconf.s pathconf.s fpathconf.s \
-	getdents.s opendir.c readdir.c rewinddir.c closedir.c pipe.s \
-	getgroups.s setuid.s getuid.s setgid.s geteuid.s getegid.s \
-	chdir.s dup2.c dup.c tcgetattr.c tcsetattr.c speed.c tcline.c \
-	times.s pause.s sleep.c alarm.s access.s _longjmp.s _setjmp.s
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  ioctl.o isatty.o read.o lseek.o close.o sbrk.o fstat.o \
-cerror.o _exit.o write.o open.o signal.o kill.o getpid.o brk.o fork.o \
-wait.o execve.o exec.o utime.o fcntl.o chmod.o getuid.o getgid.o time.o \
-stat.o link.o unlink.o rename.o mkdir.o rmdir.o sigaction.o \
-sigprocmask.o waitpid.o sysconf.o pathconf.o fpathconf.o getdents.o \
-opendir.o readdir.o rewinddir.o closedir.o pipe.o getgroups.o setuid.o \
-getuid.o setgid.o geteuid.o getegid.o chdir.o dup2.o dup.o tcgetattr.o \
-tcsetattr.o speed.o tcline.o times.o pause.o sleep.o alarm.o access.o \
-_longjmp.o _setjmp.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sysvi386/_exit.s b/newlib/libc/sys/sysvi386/_exit.s
deleted file mode 100644
index 57e598979..000000000
--- a/newlib/libc/sys/sysvi386/_exit.s
+++ /dev/null
@@ -1,6 +0,0 @@
-
-	.globl	_exit
-_exit:	
-	movl	$1, %eax
-	lcall	$7,$0
-
diff --git a/newlib/libc/sys/sysvi386/_longjmp.s b/newlib/libc/sys/sysvi386/_longjmp.s
deleted file mode 100644
index 691409b0b..000000000
--- a/newlib/libc/sys/sysvi386/_longjmp.s
+++ /dev/null
@@ -1,31 +0,0 @@
-/
-/ our buffer looks like:
-/  eax,ebx,ecx,edx,esi,edi,esp,ebp,pc
-/
-/ _longjmp is called with two parameters:  jmp_buf*,int
-/ jmp_buf* is at 4(%esp), int is at 8(%esp)
-/ retaddr is, of course, at (%esp)
-
-	.globl	_longjmp
-	.globl	longjmp
-_longjmp:
-longjmp:
-	movl	4(%esp), %ebx	/ address of buf
-	movl	8(%esp), %eax	/ store return value
-
-	movl	24(%ebx), %esp	/ restore stack
-	movl	32(%ebx), %edi
-/ Next line sets up return address.
-	movl	%edi, 0(%esp)	
-	movl	8(%ebx), %ecx
-	movl	12(%ebx), %edx
-	movl	16(%ebx), %esi
-	movl	20(%ebx), %edi
-	movl	28(%ebx), %ebp
-	movl	4(%ebx), %ebx
-	testl	%eax,%eax
-	jne	bye
-	incl	%eax		/ eax hold 0 if we are here
-bye:
-	ret
-
diff --git a/newlib/libc/sys/sysvi386/_setjmp.s b/newlib/libc/sys/sysvi386/_setjmp.s
deleted file mode 100644
index 8f191b59a..000000000
--- a/newlib/libc/sys/sysvi386/_setjmp.s
+++ /dev/null
@@ -1,24 +0,0 @@
-/
-/ our buffer looks like:
-/  eax,ebx,ecx,edx,esi,edi,esp,ebp,pc
-
-	.globl	_setjmp
-	.globl	setjmp
-_setjmp:
-setjmp:
-	pushl	%ebx
-	movl	8(%esp), %ebx
-	movl	%eax, (%ebx)
-	popl	%eax
-	movl	%eax, 4(%ebx)
-	movl	%ecx, 8(%ebx)
-	movl	%edx, 12(%ebx)
-	movl	%esi, 16(%ebx)
-	movl	%edi, 20(%ebx)
-	movl	%esp, 24(%ebx)
-	movl	%ebp, 28(%ebx)
-	movl	(%esp), %eax
-	movl	%eax, 32(%ebx)
-	xorl	%eax, %eax
-	ret
-
diff --git a/newlib/libc/sys/sysvi386/access.s b/newlib/libc/sys/sysvi386/access.s
deleted file mode 100644
index bf35891dc..000000000
--- a/newlib/libc/sys/sysvi386/access.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_access
-	.globl	access
-access:
-_access:
-	movl	$0x21, %eax
-	lcall	$7, $0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/aclocal.m4 b/newlib/libc/sys/sysvi386/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sysvi386/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sysvi386/alarm.s b/newlib/libc/sys/sysvi386/alarm.s
deleted file mode 100644
index f31b3d380..000000000
--- a/newlib/libc/sys/sysvi386/alarm.s
+++ /dev/null
@@ -1,5 +0,0 @@
-	.globl	_alarm
-_alarm:
-	movl	$0x1b, %eax
-	lcall	$7,$0
-	ret
diff --git a/newlib/libc/sys/sysvi386/brk.s b/newlib/libc/sys/sysvi386/brk.s
deleted file mode 100644
index c3cb43f11..000000000
--- a/newlib/libc/sys/sysvi386/brk.s
+++ /dev/null
@@ -1,8 +0,0 @@
-
-	.globl	_brk
-_brk:
-	movl	$0x11, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax,%eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/cerror.s b/newlib/libc/sys/sysvi386/cerror.s
deleted file mode 100644
index 9d53bae15..000000000
--- a/newlib/libc/sys/sysvi386/cerror.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_cerror
-_cerror:	
-	movl	%eax, errno
-	movl	$-1, %eax
-	ret
-	.data
-	.globl	errno
-errno:	.long 0
-
diff --git a/newlib/libc/sys/sysvi386/chdir.s b/newlib/libc/sys/sysvi386/chdir.s
deleted file mode 100644
index 9974c8668..000000000
--- a/newlib/libc/sys/sysvi386/chdir.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_chdir
-	.globl	chdir
-_chdir:
-chdir:	
-	movl	$0xc, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/chmod.s b/newlib/libc/sys/sysvi386/chmod.s
deleted file mode 100644
index ab5ef3d6a..000000000
--- a/newlib/libc/sys/sysvi386/chmod.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_chmod
-	.globl	chmod
-_chmod:
-chmod:	
-	movl	$0xf, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/close.s b/newlib/libc/sys/sysvi386/close.s
deleted file mode 100644
index e46c0c13d..000000000
--- a/newlib/libc/sys/sysvi386/close.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_close
-	.globl	close
-_close:
-close:	
-	movl	$6, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/closedir.c b/newlib/libc/sys/sysvi386/closedir.c
deleted file mode 100644
index d87d81654..000000000
--- a/newlib/libc/sys/sysvi386/closedir.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)closedir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * close a directory.
- */
-int
-closedir(dirp)
-	register DIR *dirp;
-{
-	int fd;
-
-	fd = dirp->dd_fd;
-	dirp->dd_fd = -1;
-	dirp->dd_loc = 0;
-	(void)free((void *)dirp->dd_buf);
-	(void)free((void *)dirp);
-	return(close(fd));
-}
diff --git a/newlib/libc/sys/sysvi386/configure b/newlib/libc/sys/sysvi386/configure
deleted file mode 100755
index 1c4afdc8d..000000000
--- a/newlib/libc/sys/sysvi386/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=fps.s
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sysvi386/configure.in b/newlib/libc/sys/sysvi386/configure.in
deleted file mode 100644
index 68eeb5243..000000000
--- a/newlib/libc/sys/sysvi386/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sysvi386 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(fps.s)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sysvi386/crt0.c b/newlib/libc/sys/sysvi386/crt0.c
deleted file mode 100644
index b41c00a3c..000000000
--- a/newlib/libc/sys/sysvi386/crt0.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)crt0.c	5.7 (Berkeley) 7/3/91";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- *	C start up routine.
- *	Robert Henry, UCB, 20 Oct 81
- *
- *	We make the following (true) assumption:
- *	1) The only register variable that we can trust is ebp,
- *	which points to the base of the kernel calling frame.
- */
-
-char **environ = (char **)0;
-static int fd;
-
-/*
-asm(".text");
-asm(".long 0xc000c000");
-*/
-extern	unsigned char	etext;
-extern	unsigned char	eprol asm ("eprol");
-/* extern			start() asm("start"); */
-
-_start(int arg)
-{
-	struct kframe {
-		int	kargc;
-		char	*kargv[1];	/* size depends on kargc */
-		char	kargstr[1];	/* size varies */
-		char	kenvstr[1];	/* size varies */
-	};
-	/*
-	 *	ALL REGISTER VARIABLES!!!
-	 */
-	register struct kframe *kfp;	/* r10 */
-	register char **targv;
-	register char **argv;
-	extern int errno;
-	extern void _mcleanup();
-
-#ifdef lint
-	kfp = 0;
-	initcode = initcode = 0;
-#else not lint
-# if 0
-	asm("lea 4(%ebp),%ebx");	/* catch it quick */
-# else
-	kfp = (struct kframe *)&(((int *)(&arg))[-1]);
-# endif
-#endif not lint
-	for (argv = targv = &kfp->kargv[0]; *targv++; /* void */)
-		/* void */ ;
-	if (targv >= (char **)(*argv))
-		--targv;
-	environ = targv;
-asm("eprol:");
-
-#ifdef paranoid
-	/*
-	 * The standard I/O library assumes that file descriptors 0, 1, and 2
-	 * are open. If one of these descriptors is closed prior to the start 
-	 * of the process, I/O gets very confused. To avoid this problem, we
-	 * insure that the first three file descriptors are open before calling
-	 * main(). Normally this is undefined, as it adds two unnecessary
-	 * system calls.
-	 */
-	do	{
-		fd = open("/dev/null", 2);
-	} while (fd >= 0 && fd < 3);
-	close(fd);
-#endif paranoid
-
-#ifdef MCRT0
-	atexit(_mcleanup);
-	monstartup(&eprol, &etext);
-#endif MCRT0
-	errno = 0;
-	exit(main(kfp->kargc, argv, environ));
-}
-
-#ifdef CRT0
-/*
- * null mcount and moncontrol,
- * just in case some routine is compiled for profiling
- */
-moncontrol(val)
-	int val;
-{
-
-}
-asm(".globl mcount");
-asm("mcount: ret");
-#endif CRT0
diff --git a/newlib/libc/sys/sysvi386/dup.c b/newlib/libc/sys/sysvi386/dup.c
deleted file mode 100644
index 95b0a5c92..000000000
--- a/newlib/libc/sys/sysvi386/dup.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <fcntl.h>
-
-int
-dup (int fd1) {
-	return (fcntl (fd1, F_DUPFD, 0));
-}
diff --git a/newlib/libc/sys/sysvi386/dup2.c b/newlib/libc/sys/sysvi386/dup2.c
deleted file mode 100644
index 6b72599fb..000000000
--- a/newlib/libc/sys/sysvi386/dup2.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <fcntl.h>
-
-int
-dup2 (int fd1, int fd2) {
-	close (fd2);	/* ignore errors, if any */
-	return (fcntl (fd1, F_DUPFD, fd2));
-}
diff --git a/newlib/libc/sys/sysvi386/exec.c b/newlib/libc/sys/sysvi386/exec.c
deleted file mode 100644
index 6587d50a7..000000000
--- a/newlib/libc/sys/sysvi386/exec.c
+++ /dev/null
@@ -1,54 +0,0 @@
-#include <sys/unistd.h>
-#include <errno.h>
-
-extern char **environ;
-
-int
-execv (const char *path, char * const *args) {
-	extern int execve (const char *, char * const *, char * const*);
-	return execve (path, args, environ);
-}
-
-int
-execl(const char *path, const char *arg1, ...) {
-	return execv (path, &arg1);
-}
-
-/*
- * Copy string, until c or <nul> is encountered.
- * NUL-terminate the destination string (s1).
- */
-
-static char *
-strccpy (char *s1, char *s2, char c) {
-	char *dest = s1;
-	while (*s2 && *s2 != c) {
-		*s1++ = *s2++;
-	}
-	*s1 = 0;
-	return dest;
-}
-
-int
-execvp(const char *file, char * const *args) {
-	extern char *getenv (const char *);  
-	char *path = getenv ("PATH");
-	char buf[MAXNAMLEN];
-
-	if (file[0] == '/') {	/* absolute pathname -- easy out */
-		return execv (file, args);
-	}
-
-	buf[0] = 0;	/* lots of initialization here 8-) */
-	while (*path) {
-		strccpy (buf, path, ':');
-		strcat (buf, "/");
-		strcat (buf, file);
-		execv (buf, args);
-		if (errno != ENOENT)
-			return -1;
-		while (*path && *path != ':')
-			path++;
-	}
-	return -1;
-}
diff --git a/newlib/libc/sys/sysvi386/execve.s b/newlib/libc/sys/sysvi386/execve.s
deleted file mode 100644
index d1d29bc9f..000000000
--- a/newlib/libc/sys/sysvi386/execve.s
+++ /dev/null
@@ -1,7 +0,0 @@
-	.globl	_execve
-	.globl	execve
-_execve:
-execve:
-	movl	$0x3b, %eax
-	lcall	$7,$0
-	jb	_cerror
diff --git a/newlib/libc/sys/sysvi386/fcntl.s b/newlib/libc/sys/sysvi386/fcntl.s
deleted file mode 100644
index dc3e11f74..000000000
--- a/newlib/libc/sys/sysvi386/fcntl.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	_fcntl
-	.globl	fcntl
-_fcntl:
-fcntl:	
-	movl	$0x3e, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/fork.s b/newlib/libc/sys/sysvi386/fork.s
deleted file mode 100644
index 8c9b60035..000000000
--- a/newlib/libc/sys/sysvi386/fork.s
+++ /dev/null
@@ -1,12 +0,0 @@
-	.globl	_fork
-	.globl	fork
-_fork:
-fork:
-	movl	$2, %eax
-	lcall	$7,$0
-	jb	_cerror
-	testl	%edx, %edx
-	je	bye
-	xorl	%eax,%eax
-bye:
-	ret
diff --git a/newlib/libc/sys/sysvi386/fpathconf.s b/newlib/libc/sys/sysvi386/fpathconf.s
deleted file mode 100644
index b55ea92d1..000000000
--- a/newlib/libc/sys/sysvi386/fpathconf.s
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	fpathconf
-fpathconf:
-	movl	$0x2f28, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/fps.s b/newlib/libc/sys/sysvi386/fps.s
deleted file mode 100644
index 83214dff4..000000000
--- a/newlib/libc/sys/sysvi386/fps.s
+++ /dev/null
@@ -1,18 +0,0 @@
-	.globl	_fpgetsticky
-_fpgetsticky:
-	getpsw	  r0
-	and.w	  #0x1f00,r0
-	shl.w	  #0xf8,r0
-	ret	  #0x0
-
-
-	.globl	_fpsetsticky	
-_fpsetsticky:
-	 getpsw	  r0
-	 mov.w	  [ap],r1
-	 shl.w	  #0x8,r1
-	 updpsw.h r1,#0x1f00
-	 trapfl
-	 and.w	  #0x1f00,r0
-	 shl.w	  #0xf8,r0
-	 ret	  #0x0
diff --git a/newlib/libc/sys/sysvi386/fpx.c b/newlib/libc/sys/sysvi386/fpx.c
deleted file mode 100644
index d55a1e30f..000000000
--- a/newlib/libc/sys/sysvi386/fpx.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <ieeefp.h>
-#include <machine/registers.h>
-
-
-fp_except _DEFUN(fpsetmask,(newmask),
-		fp_except newmask)
-
-{
-  fp_except oldmask;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldmask = tkcw.fp_trap;
-  tkcw.fp_trap = newmask;
-  sysv60(0, 8, &tkcw);
-  return oldmask;
-
-}
-
-fp_except _DEFUN_VOID(fpgetmask)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.fp_trap;
-}
-
-
-fp_rnd _DEFUN_VOID(fpgetround)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.fp_rounding;
-}
-
-fp_rnd _DEFUN(fpsetround,(rnd),
-	     fp_rnd rnd)
-{
-  fp_rnd oldrnd;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldrnd = tkcw.fp_rounding;
-  tkcw.fp_rounding = rnd;
-  sysv60(0, 8, &tkcw);
-  return oldrnd;
-}
-
-
-
-
-
-fp_rdi _DEFUN_VOID(fpgetroundtoi)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.integer_rounding;
-}
-
-fp_rdi _DEFUN(fpsetroundtoi,(rnd),
-	     fp_rdi rnd)
-{
-  fp_rdi oldrnd;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldrnd = tkcw.integer_rounding;
-  tkcw.integer_rounding = rnd;
-  sysv60(0, 8, &tkcw);
-  return oldrnd;
-}
-
-
-
diff --git a/newlib/libc/sys/sysvi386/fstat.s b/newlib/libc/sys/sysvi386/fstat.s
deleted file mode 100644
index ced264526..000000000
--- a/newlib/libc/sys/sysvi386/fstat.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_fstat
-	.globl	fstat
-_fstat:
-fstat:	
-	movl	$0x1c, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax,%eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/getdents.s b/newlib/libc/sys/sysvi386/getdents.s
deleted file mode 100644
index 524a88727..000000000
--- a/newlib/libc/sys/sysvi386/getdents.s
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	_getdents
-_getdents:
-	movl	$0x51, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/getegid.s b/newlib/libc/sys/sysvi386/getegid.s
deleted file mode 100644
index 3a9709841..000000000
--- a/newlib/libc/sys/sysvi386/getegid.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_getegid
-	.globl	getegid
-_getegid:
-getegid:
-	movl	$0x2f, %eax
-	lcall	$7,$0
-	movl	%edx,%eax
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/geteuid.s b/newlib/libc/sys/sysvi386/geteuid.s
deleted file mode 100644
index ae45c473f..000000000
--- a/newlib/libc/sys/sysvi386/geteuid.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_geteuid
-	.globl	geteuid
-_geteuid:
-geteuid:
-	movl	$0x18, %eax
-	lcall	$7,$0
-	movl	%edx,%eax
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/getgid.s b/newlib/libc/sys/sysvi386/getgid.s
deleted file mode 100644
index 47a6391f8..000000000
--- a/newlib/libc/sys/sysvi386/getgid.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_getgid
-	.globl	getgid
-_getgid:
-getgid:
-	movl	$0x2f, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/getgroups.s b/newlib/libc/sys/sysvi386/getgroups.s
deleted file mode 100644
index d690adf44..000000000
--- a/newlib/libc/sys/sysvi386/getgroups.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_getgroups
-	.globl	getgroups
-_getgroups:
-getgroups:
-	movl	$0x2b28, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/getpid.s b/newlib/libc/sys/sysvi386/getpid.s
deleted file mode 100644
index 6d19dffc9..000000000
--- a/newlib/libc/sys/sysvi386/getpid.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	_getpid
-	.globl	getpid
-_getpid:
-getpid:
-	movl	$0x14, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/getuid.s b/newlib/libc/sys/sysvi386/getuid.s
deleted file mode 100644
index 9c4dfe3a4..000000000
--- a/newlib/libc/sys/sysvi386/getuid.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_getuid
-	.globl	getuid
-_getuid:
-getuid:
-	movl	$0x18, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/ioctl.s b/newlib/libc/sys/sysvi386/ioctl.s
deleted file mode 100644
index b63597d1f..000000000
--- a/newlib/libc/sys/sysvi386/ioctl.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	_ioctl
-	.globl	ioctl
-_ioctl:
-ioctl:	
-	movl	$0x36, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/isatty.c b/newlib/libc/sys/sysvi386/isatty.c
deleted file mode 100644
index fa1e3557f..000000000
--- a/newlib/libc/sys/sysvi386/isatty.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/termio.h>
-
-int
-isatty(fd)
-int fd; {
-	struct termio buf;
-
-	if (ioctl (fd, TCGETA, &buf) == -1)
-		return 0;
-	return 1;
-}
diff --git a/newlib/libc/sys/sysvi386/kill.s b/newlib/libc/sys/sysvi386/kill.s
deleted file mode 100644
index 805d8f778..000000000
--- a/newlib/libc/sys/sysvi386/kill.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_kill
-	.globl	kill
-_kill:
-kill:	
-	movl	$0x25, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/link.s b/newlib/libc/sys/sysvi386/link.s
deleted file mode 100644
index d298cd08e..000000000
--- a/newlib/libc/sys/sysvi386/link.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_link
-	.globl	link
-_link:
-link:	
-	movl	$0x9, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/lseek.s b/newlib/libc/sys/sysvi386/lseek.s
deleted file mode 100644
index 88b2fc1b0..000000000
--- a/newlib/libc/sys/sysvi386/lseek.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_lseek
-	.globl	lseek
-_lseek:
-lseek:
-	movl	$0x13, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/mkdir.s b/newlib/libc/sys/sysvi386/mkdir.s
deleted file mode 100644
index b2888eb68..000000000
--- a/newlib/libc/sys/sysvi386/mkdir.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_mkdir
-	.globl	mkdir
-_mkdir:
-mkdir:	
-	movl	$0x50, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/open.s b/newlib/libc/sys/sysvi386/open.s
deleted file mode 100644
index 97356f1ad..000000000
--- a/newlib/libc/sys/sysvi386/open.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	_open
-	.globl	open
-_open:
-open:
-	movl	$5, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/opendir.c b/newlib/libc/sys/sysvi386/opendir.c
deleted file mode 100644
index ce080e312..000000000
--- a/newlib/libc/sys/sysvi386/opendir.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)opendir.c	5.11 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * open a directory.
- */
-DIR *
-opendir(name)
-	const char *name;
-{
-	register DIR *dirp;
-	register int fd;
-
-	if ((fd = open(name, 0)) == -1)
-		return NULL;
-	if (fcntl(fd, F_SETFD, 1) == -1 ||
-	    (dirp = (DIR *)malloc(sizeof(DIR))) == NULL) {
-		close (fd);
-		return NULL;
-	}
-	/*
-	 * If CLSIZE is an exact multiple of DIRBLKSIZ, use a CLSIZE
-	 * buffer that it cluster boundary aligned.
-	 * Hopefully this can be a big win someday by allowing page trades
-	 * to user space to be done by getdirentries()
-	 */
-	dirp->dd_buf = malloc (512);
-	dirp->dd_len = 512;
-
-	if (dirp->dd_buf == NULL) {
-		close (fd);
-		return NULL;
-	}
-	dirp->dd_fd = fd;
-	dirp->dd_loc = 0;
-	dirp->dd_seek = 0;
-	/*
-	 * Set up seek point for rewinddir.
-	 */
-	return dirp;
-}
diff --git a/newlib/libc/sys/sysvi386/pathconf.s b/newlib/libc/sys/sysvi386/pathconf.s
deleted file mode 100644
index 23de786d9..000000000
--- a/newlib/libc/sys/sysvi386/pathconf.s
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	pathconf
-pathconf:
-	movl	$0x2e28, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/pause.s b/newlib/libc/sys/sysvi386/pause.s
deleted file mode 100644
index 8e8bd229b..000000000
--- a/newlib/libc/sys/sysvi386/pause.s
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	_pause
-_pause:	
-	movl	$0x1d, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/pipe.s b/newlib/libc/sys/sysvi386/pipe.s
deleted file mode 100644
index 6365bcbe6..000000000
--- a/newlib/libc/sys/sysvi386/pipe.s
+++ /dev/null
@@ -1,12 +0,0 @@
-	.globl	_pipe
-	.globl	pipe
-_pipe:
-pipe:	
-	movl	$0x2a, %eax
-	lcall	$7,$0
-	jb	_cerror
-	movl	4(%esp), %ecx
-	movl	(%ecx), %eax
-	movl	4(%ecx), %edx
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/read.s b/newlib/libc/sys/sysvi386/read.s
deleted file mode 100644
index 8ecb5bacf..000000000
--- a/newlib/libc/sys/sysvi386/read.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_read
-	.globl	read
-_read:
-read:
-	movl	$3, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/readdir.c b/newlib/libc/sys/sysvi386/readdir.c
deleted file mode 100644
index 350fa664f..000000000
--- a/newlib/libc/sys/sysvi386/readdir.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)readdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <dirent.h>
-
-/*
- * get next entry in a directory.
- */
-struct dirent *
-readdir(dirp)
-register DIR *dirp; {
-  register struct dirent *dp;
-  
-  for (;;) {
-    if (dirp->dd_loc == 0) {
-      dirp->dd_size = _getdents (dirp->dd_fd,
-				dirp->dd_buf,
-				dirp->dd_len);
-      
-      if (dirp->dd_size <= 0)
-	return NULL;
-    }
-    if (dirp->dd_loc >= dirp->dd_size) {
-      dirp->dd_loc = 0;
-      continue;
-    }
-    dp = (struct dirent *)(dirp->dd_buf + dirp->dd_loc);
-    if ((int)dp & 03)	/* bogus pointer check */
-      return NULL;
-    if (dp->d_reclen <= 0 ||
-	dp->d_reclen > dirp->dd_len + 1 - dirp->dd_loc)
-      return NULL;
-    dirp->dd_loc += dp->d_reclen;
-    if (dp->d_ino == 0)
-      continue;
-    return (dp);
-  }
-}
diff --git a/newlib/libc/sys/sysvi386/rename.s b/newlib/libc/sys/sysvi386/rename.s
deleted file mode 100644
index 61a69c59e..000000000
--- a/newlib/libc/sys/sysvi386/rename.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_rename
-	.globl	rename
-_rename:
-rename:	
-	movl	$0x3028, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/rewinddir.c b/newlib/libc/sys/sysvi386/rewinddir.c
deleted file mode 100644
index d52c013c4..000000000
--- a/newlib/libc/sys/sysvi386/rewinddir.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)rewinddir.c	5.1 (Berkeley) 5/25/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <dirent.h>
-
-void
-rewinddir(dirp)
-	DIR *dirp;
-{
-	extern long _rewinddir;
-
-	_seekdir((dirp), _rewinddir);
-	_rewinddir = telldir(dirp);
-}
diff --git a/newlib/libc/sys/sysvi386/rmdir.s b/newlib/libc/sys/sysvi386/rmdir.s
deleted file mode 100644
index 427ee108d..000000000
--- a/newlib/libc/sys/sysvi386/rmdir.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_rmdir
-	.globl	rmdir
-_rmdir:
-rmdir:	
-	movl	$0x4f, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/sbrk.c b/newlib/libc/sys/sysvi386/sbrk.c
deleted file mode 100644
index 8ae3ed12b..000000000
--- a/newlib/libc/sys/sysvi386/sbrk.c
+++ /dev/null
@@ -1,21 +0,0 @@
-extern end;
-
-static void *curbrk = (char*)&end;
-
-void *
-sbrk(incr)
-int incr; {
-	extern int errno;
-	extern int _brk(void *);
-	void *ptr = curbrk;
-	int t;
-
-	if (incr == 0)
-		return curbrk;
-	t = _brk (curbrk + incr);
-	if (t == -1 && errno)
-		return (void *)-1;
-	curbrk = ((char *)curbrk) + incr;
-	return ptr;
-}
-
diff --git a/newlib/libc/sys/sysvi386/scandir.c b/newlib/libc/sys/sysvi386/scandir.c
deleted file mode 100644
index 6c4116c9c..000000000
--- a/newlib/libc/sys/sysvi386/scandir.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)scandir.c	5.10 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-/*
- * Scan the directory dirname calling select to make a list of selected
- * directory entries then sort using qsort and compare routine dcomp.
- * Returns the number of entries and a pointer to a list of pointers to
- * struct dirent (through namelist). Returns -1 if there were any errors.
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*
- * The DIRSIZ macro gives the minimum record length which will hold
- * the directory entry.  This requires the amount of space in struct dirent
- * without the d_name field, plus enough space for the name with a terminating
- * null byte (dp->d_namlen+1), rounded up to a 4 byte boundary.
- */
-#undef DIRSIZ
-#define DIRSIZ(dp) \
-    ((sizeof (struct dirent) - (MAXNAMLEN+1)) + (((dp)->d_namlen+1 + 3) &~ 3))
-
-int
-scandir(dirname, namelist, select, dcomp)
-	const char *dirname;
-	struct dirent ***namelist;
-	int (*select) __P((struct dirent *));
-	int (*dcomp) __P((const void *, const void *));
-{
-	register struct dirent *d, *p, **names;
-	register size_t nitems;
-	struct stat stb;
-	long arraysz;
-	DIR *dirp;
-
-	if ((dirp = opendir(dirname)) == NULL)
-		return(-1);
-	if (fstat(dirp->dd_fd, &stb) < 0)
-		return(-1);
-
-	/*
-	 * estimate the array size by taking the size of the directory file
-	 * and dividing it by a multiple of the minimum size entry. 
-	 */
-	arraysz = (stb.st_size / 24);
-	names = (struct dirent **)malloc(arraysz * sizeof(struct dirent *));
-	if (names == NULL)
-		return(-1);
-
-	nitems = 0;
-	while ((d = readdir(dirp)) != NULL) {
-		if (select != NULL && !(*select)(d))
-			continue;	/* just selected names */
-		/*
-		 * Make a minimum size copy of the data
-		 */
-		p = (struct dirent *)malloc(DIRSIZ(d));
-		if (p == NULL)
-			return(-1);
-		p->d_ino = d->d_ino;
-		p->d_reclen = d->d_reclen;
-		p->d_namlen = d->d_namlen;
-		bcopy(d->d_name, p->d_name, p->d_namlen + 1);
-		/*
-		 * Check to make sure the array has space left and
-		 * realloc the maximum size.
-		 */
-		if (++nitems >= arraysz) {
-			if (fstat(dirp->dd_fd, &stb) < 0)
-				return(-1);	/* just might have grown */
-			arraysz = stb.st_size / 12;
-			names = (struct dirent **)realloc((char *)names,
-				arraysz * sizeof(struct dirent *));
-			if (names == NULL)
-				return(-1);
-		}
-		names[nitems-1] = p;
-	}
-	closedir(dirp);
-	if (nitems && dcomp != NULL)
-		qsort(names, nitems, sizeof(struct dirent *), dcomp);
-	*namelist = names;
-	return(nitems);
-}
-
-/*
- * Alphabetic order comparison routine for those who want it.
- */
-int
-alphasort(d1, d2)
-	const void *d1;
-	const void *d2;
-{
-	return(strcmp((*(struct dirent **)d1)->d_name,
-	    (*(struct dirent **)d2)->d_name));
-}
diff --git a/newlib/libc/sys/sysvi386/seekdir.c b/newlib/libc/sys/sysvi386/seekdir.c
deleted file mode 100644
index 50331402a..000000000
--- a/newlib/libc/sys/sysvi386/seekdir.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)seekdir.c	5.7 (Berkeley) 6/1/90";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-
-/*
- * Seek to an entry in a directory.
- * _seekdir is in telldir.c so that it can share opaque data structures.
- */
-void
-seekdir(dirp, loc)
-	DIR *dirp;
-	long loc;
-{
-
-	_seekdir(dirp, loc);
-}
diff --git a/newlib/libc/sys/sysvi386/setgid.s b/newlib/libc/sys/sysvi386/setgid.s
deleted file mode 100644
index a55dbf89e..000000000
--- a/newlib/libc/sys/sysvi386/setgid.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_setgid
-	.globl	setgid
-_setgid:
-setgid:
-	movl	$0x2e, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax,%eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/setuid.s b/newlib/libc/sys/sysvi386/setuid.s
deleted file mode 100644
index f24da1fd1..000000000
--- a/newlib/libc/sys/sysvi386/setuid.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_setuid
-	.globl	setuid
-_setuid:
-setuid:
-	movl	$0x17, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax,%eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/sigaction.s b/newlib/libc/sys/sysvi386/sigaction.s
deleted file mode 100644
index 35a1b8d2a..000000000
--- a/newlib/libc/sys/sysvi386/sigaction.s
+++ /dev/null
@@ -1,20 +0,0 @@
-/
-/ The SCO signal stuff seems to be weird.  The POSIX stuff appears to
-/ "extended" system calls, and use values in eax and edx.
-/ Like most of the other signal routines, it takes a function pointer
-/ in %edx.  Since this function is terribly small, I am including it
-/ in all of the ones that need it, for now at least.  Seems silly to include
-/ a whole file for two instructions.
-
-sigret:
-	addl	$4, %esp
-	lcall	$0xf, $0
-	.globl	sigaction
-sigaction:
-	movl	$0x2728, %eax
-	movl	sigret, %edx
-	lcall	$7,$0
-	jb	_cerror
-	ret
-	addl	$4, %esp
-	lcall	$0xf,$0
diff --git a/newlib/libc/sys/sysvi386/signal.s b/newlib/libc/sys/sysvi386/signal.s
deleted file mode 100644
index 2418eb02b..000000000
--- a/newlib/libc/sys/sysvi386/signal.s
+++ /dev/null
@@ -1,16 +0,0 @@
-/ According to the iBCS2 book, signal() has 0x30 in %eax, and the address
-/ of a function in %edx.  This function is where a signal handler will
-/ return to; it should just adjust the stack pointer, and call $f,$0.
-/ Strange but true.
-	.globl	signal
-
-sigret:
-	addl	$4, %esp
-	lcall	$0xf, $0
-signal:
-	movl	$0x30, %eax
-	movl	sigret, %edx
-	lcall	$7,$0
-	jb	_cerror
-/ The iBCS2 book also clears out %eax here, which seems to be broken.
-	ret
diff --git a/newlib/libc/sys/sysvi386/sigprocmask.s b/newlib/libc/sys/sysvi386/sigprocmask.s
deleted file mode 100644
index fa988d538..000000000
--- a/newlib/libc/sys/sysvi386/sigprocmask.s
+++ /dev/null
@@ -1,12 +0,0 @@
-/
-/ The SCO signal stuff seems to be weird.  The POSIX stuff appears to
-/ "extended" system calls, and use values in eax and edx.
-/
-	.globl	sigprocmask
-sigprocmask:
-	movl	$0x2828, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
-	addl	$4, %esp
-	lcall	$0xf,$0
diff --git a/newlib/libc/sys/sysvi386/sleep.c b/newlib/libc/sys/sysvi386/sleep.c
deleted file mode 100644
index 723ee3ce2..000000000
--- a/newlib/libc/sys/sysvi386/sleep.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <sys/types.h>
-#include <sys/signal.h>
-
-unsigned
-sleep(unsigned secs) {
-	extern time_t time (time_t *);
-	time_t t = time(0);
-
-	_alarm(secs);
-	_pause();
-	return (time(0) - t);
-}
diff --git a/newlib/libc/sys/sysvi386/speed.c b/newlib/libc/sys/sysvi386/speed.c
deleted file mode 100644
index 1b22c026f..000000000
--- a/newlib/libc/sys/sysvi386/speed.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#define _NO_MACROS
-#include <sys/termios.h>
-
-speed_t
-cfgetospeed(const struct termios *tp) {
-	return tp->c_ospeed;
-}
-
-int
-cfsetospeed(struct termios *tp, speed_t speed) {
-	tp->c_ospeed = speed;
-	return 0;
-}
-
-speed_t
-cfgetispeed(const struct termios *tp) {
-	return tp->c_ispeed;
-}
-
-int
-cfsetispeed(struct termios *tp, speed_t speed) {
-	tp->c_ispeed = speed;
-	return 0;
-}
diff --git a/newlib/libc/sys/sysvi386/stat.s b/newlib/libc/sys/sysvi386/stat.s
deleted file mode 100644
index 50c84bb97..000000000
--- a/newlib/libc/sys/sysvi386/stat.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_stat
-	.globl	stat
-_stat:
-stat:	
-	movl	$0x12, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax,%eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/sys/dirent.h b/newlib/libc/sys/sysvi386/sys/dirent.h
deleted file mode 100644
index 728042176..000000000
--- a/newlib/libc/sys/sysvi386/sys/dirent.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _SYS_DIRENT_H
-# define _SYS_DIRENT_H
-
-/*
- * This file was written to be compatible with the BSD directory
- * routines, so it looks like it.  But it was written from scratch.
- * Sean Eric Fagan, sef@Kithrup.COM
- */
-
-typedef struct _dirdesc {
-	int	dd_fd;
-	long	dd_loc;
-	long	dd_size;
-	char	*dd_buf;
-	int	dd_len;
-	long	dd_seek;
-} DIR;
-
-# define __dirfd(dp)	((dp)->dd_fd)
-
-DIR *opendir (const char *);
-struct dirent *readdir (DIR *);
-void rewinddir (DIR *);
-int closedir (DIR *);
-
-#include <sys/types.h>
-
-struct dirent {
-	long	d_ino;
-	off_t	d_off;
-	unsigned short	d_reclen;
-	/* we need better syntax for variable-sized arrays */
-	char	d_name[1];
-};
-
-#endif
diff --git a/newlib/libc/sys/sysvi386/sys/param.h b/newlib/libc/sys/sysvi386/sys/param.h
deleted file mode 100644
index 6c6f6b0a4..000000000
--- a/newlib/libc/sys/sysvi386/sys/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_PARAM_H
-# define _SYS_PARAM_H
-
-# define HZ	60
-# define NOFILE	60
-# define PATHSIZE	1024
-
-#endif
diff --git a/newlib/libc/sys/sysvi386/sys/setjmp.h b/newlib/libc/sys/sysvi386/sys/setjmp.h
deleted file mode 100644
index 425b0ae89..000000000
--- a/newlib/libc/sys/sysvi386/sys/setjmp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _JBLEN
-# define _JBLEN	36
-
-typedef char jmp_buf[_JBLEN];
-
-#endif	/* _JBLEN */
diff --git a/newlib/libc/sys/sysvi386/sys/termio.h b/newlib/libc/sys/sysvi386/sys/termio.h
deleted file mode 100644
index 2ef33b8dc..000000000
--- a/newlib/libc/sys/sysvi386/sys/termio.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef	_SYS_TERMIO_H
-# define _SYS_TERMIO_H
-
-# define TCGETA (('T'<<8)|1)
-# define TCSBRK (('T'<<8)|5)
-# define NCC 8
-
-# define IGNBRK	000001
-# define BRKINT	000002
-# define IGNPAR	000004
-# define INPCK	000020
-# define ISTRIP	000040
-# define INLCR	000100
-# define IGNCR	000200
-# define ICRNL	000400
-# define IXON	002000
-# define IXOFF	010000
-
-# define OPOST	000001
-# define OCRNL	000004
-# define ONLCR	000010
-# define ONOCR	000020
-# define TAB3	014000
-
-# define CLOCAL	004000
-# define CREAD	000200
-# define CSIZE	000060
-# define CS5	0
-# define CS6	020
-# define CS7	040
-# define CS8	060
-# define CSTOPB	000100
-# define HUPCL	002000
-# define PARENB	000400
-# define PAODD	001000
-
-# define ECHO	0000010
-# define ECHOE	0000020
-# define ECHOK	0000040
-# define ECHONL	0000100
-# define ICANON	0000002
-# define IEXTEN	0000400	/* anybody know *what* this does?! */
-# define ISIG	0000001
-# define NOFLSH	0000200
-
-# define VEOF	4	/* also VMIN -- thanks, AT&T */
-# define VEOL	5	/* also VTIME -- thanks again */
-# define VERASE	2
-# define VINTR	0
-# define VKILL	3
-# define VMIN	4	/* also VEOF */
-# define VQUIT	1
-# define VTIME	5	/* also VEOL */
-
-# define B0	000000
-# define B50	000001
-# define B75	000002
-# define B110	000003
-# define B134	000004
-# define B150	000005
-# define B200	000006
-# define B300	000007
-# define B600	000010
-# define B1200	000011
-# define B1800	000012
-# define B2400	000013
-# define B4800	000014
-# define B9600	000015
-# define B19200	000016
-# define B38400	000017
-
-struct termio {
-	unsigned short	c_iflag;
-	unsigned short	c_oflag;
-	unsigned short	c_cflag;
-	unsigned short	c_lflag;
-	char		c_line;
-	unsigned char	c_cc[NCC];
-};
-
-#endif	/* _SYS_TERMIO_H */
-
diff --git a/newlib/libc/sys/sysvi386/sys/termios.h b/newlib/libc/sys/sysvi386/sys/termios.h
deleted file mode 100644
index edc81b3d5..000000000
--- a/newlib/libc/sys/sysvi386/sys/termios.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef	_SYS_TERMIOS_H
-# define _SYS_TERMIOS_H
-
-# define _XCGETA (('x'<<8)|1)
-# define _XCSETA (('x'<<8)|2)
-# define _XCSETAW (('x'<<8)|3)
-# define _XCSETAF (('x'<<8)|4)
-# define _TCSBRK (('T'<<8)|5)
-# define _TCFLSH (('T'<<8)|7)
-# define _TCXONC (('T'<<8)|6)
-
-# define TCOOFF	0
-# define TCOON	1
-# define TCIOFF	2
-# define TCION	3
-
-# define TCIFLUSH	0
-# define TCOFLUSH	1
-# define TCIOFLUSH	2
-
-# define NCCS 13
-
-# define TCSAFLUSH	_XCSETAF
-# define TCSANOW	_XCSETA
-# define TCSADRAIN	_XCSETAW
-# define TCSADFLUSH	_XCSETAF
-
-# define IGNBRK	000001
-# define BRKINT	000002
-# define IGNPAR	000004
-# define INPCK	000020
-# define ISTRIP	000040
-# define INLCR	000100
-# define IGNCR	000200
-# define ICRNL	000400
-# define IXON	002000
-# define IXOFF	010000
-
-# define OPOST	000001
-# define OCRNL	000004
-# define ONLCR	000010
-# define ONOCR	000020
-# define TAB3	014000
-
-# define CLOCAL	004000
-# define CREAD	000200
-# define CSIZE	000060
-# define CS5	0
-# define CS6	020
-# define CS7	040
-# define CS8	060
-# define CSTOPB	000100
-# define HUPCL	002000
-# define PARENB	000400
-# define PAODD	001000
-
-# define ECHO	0000010
-# define ECHOE	0000020
-# define ECHOK	0000040
-# define ECHONL	0000100
-# define ICANON	0000002
-# define IEXTEN	0000400	/* anybody know *what* this does?! */
-# define ISIG	0000001
-# define NOFLSH	0000200
-# define TOSTOP	0001000
-
-# define VEOF	4	/* also VMIN -- thanks, AT&T */
-# define VEOL	5	/* also VTIME -- thanks again */
-# define VERASE	2
-# define VINTR	0
-# define VKILL	3
-# define VMIN	4	/* also VEOF */
-# define VQUIT	1
-# define VSUSP	10
-# define VTIME	5	/* also VEOL */
-# define VSTART	11
-# define VSTOP	12
-
-# define B0	000000
-# define B50	000001
-# define B75	000002
-# define B110	000003
-# define B134	000004
-# define B150	000005
-# define B200	000006
-# define B300	000007
-# define B600	000010
-# define B1200	000011
-# define B1800	000012
-# define B2400	000013
-# define B4800	000014
-# define B9600	000015
-# define B19200	000016
-# define B38400	000017
-
-typedef unsigned char cc_t;
-typedef unsigned short tcflag_t;
-typedef char speed_t;
-
-struct termios {
-	tcflag_t	c_iflag;
-	tcflag_t	c_oflag;
-	tcflag_t	c_cflag;
-	tcflag_t	c_lflag;
-	char		c_line;
-	cc_t		c_cc[NCCS];
-	speed_t		c_ispeed;
-	speed_t		c_ospeed;
-};
-
-# ifndef _NO_MACROS
-
-#  define cfgetospeed(tp)	((tp)->c_ospeed)
-#  define cfgetispeed(tp)	((tp)->c_ispeed)
-#  define cfsetospeed(tp,s)	(((tp)->c_ospeed = (s)), 0)
-#  define cfsetispeed(tp,s)	(((tp)->c_ispeed = (s)), 0)
-#  define tcdrain(fd)		_ioctl (fd, _TCSBRK, 1)
-# endif	/* _NO_MACROS */
-
-#endif	/* _SYS_TERMIOS_H */
-
diff --git a/newlib/libc/sys/sysvi386/sys/utime.h b/newlib/libc/sys/sysvi386/sys/utime.h
deleted file mode 100644
index 80b1daa74..000000000
--- a/newlib/libc/sys/sysvi386/sys/utime.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _SYS_UTIME_H
-# define _SYS_UTIME_H
-
-#include <time.h>
-
-struct utimbuf {
-	time_t	actime;
-	time_t	modtime;
-};
-
-#endif	/* _SYS_UTIME_H */
-
diff --git a/newlib/libc/sys/sysvi386/sys/utmp.h b/newlib/libc/sys/sysvi386/sys/utmp.h
deleted file mode 100644
index f519e6af0..000000000
--- a/newlib/libc/sys/sysvi386/sys/utmp.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _UTMP_H
-# define _UTMP_H
-
-#include <sys/types.h>
-
-# define UTMP_FILE "/etc/utmp"
-# define WTMP_FILE "/etc/wtmp"
-
-struct utmp {
-	char	ut_user[8];	/* how limited */
-	char	ut_id[4];	/* ditto */
-	char	ut_line[12];	/* I'm repeating myself */
-	short	ut_pid;
-	short	ut_type;
-	struct exit_status {
-		short e_termination;
-		short e_exit;
-	} ut_exit;		/* for DEAD_PROCESS processes */
-	time_t	ut_time;
-};
-
-/* Definitions for ut_type fields */
-
-# define	EMPTY	0
-# define	RUN_LVL	1
-# define	BOOT_TIME	2
-# define	OLD_TIME	3
-# define	NEW_TIME	4
-# define	INIT_PROCESS	5
-# define	LOGIN_PROCESS	6
-# define	USER_PROCESS	7
-# define	DEAD_PROCESS	8
-# define	ACCOUNTING	9
-# define	UTMAXTYPE	ACCOUNTING
-
-# define	RUNLVL_MSG	"run-level %c"
-# define	BOOT_MSG	"system boot"
-# define	OTIME_MSG	"old time"
-# define	NTIME_MSG	"new time"
-
-#endif	/* _UTMP_H */
-
-
diff --git a/newlib/libc/sys/sysvi386/sys/wait.h b/newlib/libc/sys/sysvi386/sys/wait.h
deleted file mode 100644
index 7c36f32db..000000000
--- a/newlib/libc/sys/sysvi386/sys/wait.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _WAIT_H
-# define _WAIT_H
-
-# define WNOHANG 1
-# define WUNTRACED 2
-
-/*
- * Unlike the atrocity that BSD ended up using, we do not have a "union
- * wait," although I could probably implement one.  Given the code I
- * sometimes end up porting, it might be a good thing.  Anyway, the
- * format of a stat thingy, filled in by the wait*() routines, is:
- * struct {
- *    int filler:16;
- *    union {
- *        struct stopped {
- *            int signo:8;
- *            int o177:8;	// will be 0177 
- *        };
- *        struct exited {
- *            int retval:8;
- *            int zero:8;	// 0, obviously 8-)
- *        };
- *        struct termed {
- *            int zero:8;	// zeroes
- *            int corep:1;	// was there a core file?
- *            int signo:7;	// what?!  Only 127 signals?!
- *        };
- *        int value:16;
- *     };
- * };
- *
- * Braver souls than I can turn that into a union wait, if desired.  Ick.
- */
-
-# define WIFEXITED(val)	((val)&0xff)
-# define WEXITSTATUS(val)	(((val)>>8)&0xff)
-# define WIFSIGNALED(val)	((val) && !((val)&0xff))
-# define WTERMSIG(val)	(((val)>>8)&0x7f)
-# define WIFSTOPPED(val) (((val)&0xff)==0177)
-# define WSTOPSIG(val)	(((val)>>8)&0xff)
-#endif	/* _SYS_WAIT_H */
-
diff --git a/newlib/libc/sys/sysvi386/sysconf.s b/newlib/libc/sys/sysvi386/sysconf.s
deleted file mode 100644
index 99bbc6040..000000000
--- a/newlib/libc/sys/sysvi386/sysconf.s
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	sysconf
-sysconf:
-	movl	$0x2d28, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/tcgetattr.c b/newlib/libc/sys/sysvi386/tcgetattr.c
deleted file mode 100644
index e368418c1..000000000
--- a/newlib/libc/sys/sysvi386/tcgetattr.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/termios.h>
-
-int
-tcgetattr (int fd, struct termios *tp) {
-	return _ioctl (fd, _XCGETA, tp);
-}
diff --git a/newlib/libc/sys/sysvi386/tcline.c b/newlib/libc/sys/sysvi386/tcline.c
deleted file mode 100644
index 39d4699e0..000000000
--- a/newlib/libc/sys/sysvi386/tcline.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#define _NO_MACROS
-#include <sys/unistd.h>
-#include <sys/termios.h>
-#include <errno.h>
-
-int
-tcsendbreak (int fd, int dur) {
-	do {
-		if (_ioctl (fd, _TCSBRK, 0) == -1)
-			return -1;
-	} while (dur--);
-	return 0;
-}
-
-int
-tcdrain (int fd) {
-	return _ioctl (fd, _TCSBRK, 1);
-}
-
-int
-tcflush(int fd, int what) {
-	return _ioctl (fd, _TCFLSH, what);
-}
-
-/*
- * I'm not positive about this function.  I *think* it's right,
- * but I could be missing something.
- */
-
-int
-tcflow (int fd, int action) {
-	struct termios t;
-
-	switch (action) {
-	case TCOOFF:
-	case TCOON:
-		return _ioctl (fd, _TCXONC, action);
-/*
- * Here is where I'm not terribly certain.  1003.1 says:
- * if action is TCIOFF, the system shall transmit a STOP
- * character, which is intended to cause the terminal device
- * to stop transmitting data to the system.  (Similarly for
- * TCION.)
- * I *assume* that means I find out what VSTOP for the
- * terminal device is, and then write it.  1003.1 also does
- * not say what happens if c_cc[VSTOP] is _POSIX_VDISABLE;
- * I assume it should reaturn EINVAL, so that's what I do.
- * Anyway, here's the code.  It might or might not be right.
- */
-	case TCIOFF:
-		if (tcgetattr (fd, &t) == -1)
-			return -1;
-		if (tcgetattr (fd, &t) == -1)
-			return -1;
-#ifdef _POSIX_VDISABLE
-		if (t.c_cc[VSTOP] == _POSIX_VDISABLE) {
-			errno = EINVAL;
-			return -1;
-		}
-#endif
-		if (write (fd, &t.c_cc[VSTOP], 1) == 1)
-			return 0;
-		else
-			return -1;
-	case TCION:
-		if (tcgetattr (fd, &t) == -1)
-			return -1;
-		if (tcgetattr (fd, &t) == -1)
-			return -1;
-#ifdef _POSIX_VDISABLE
-		if (t.c_cc[VSTART] == _POSIX_VDISABLE) {
-			errno = EINVAL;
-			return -1;
-		}
-#endif
-		if (write (fd, &t.c_cc[VSTART], 1) == 1)
-			return 0;
-		else
-			return -1;
-	default:
-		errno = EINVAL;
-		return -1;
-	}
-}
diff --git a/newlib/libc/sys/sysvi386/tcsetattr.c b/newlib/libc/sys/sysvi386/tcsetattr.c
deleted file mode 100644
index 1df92b281..000000000
--- a/newlib/libc/sys/sysvi386/tcsetattr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <sys/termios.h>
-
-int
-tcsetattr (int fd, int opts, const struct termios *tp) {
-	return _ioctl (fd, opts, tp);
-}
-
diff --git a/newlib/libc/sys/sysvi386/telldir.c b/newlib/libc/sys/sysvi386/telldir.c
deleted file mode 100644
index 37d9de638..000000000
--- a/newlib/libc/sys/sysvi386/telldir.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (c) 1983 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)telldir.c	5.9 (Berkeley) 2/23/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/param.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-/*
- * The option SINGLEUSE may be defined to say that a telldir
- * cookie may be used only once before it is freed. This option
- * is used to avoid having memory usage grow without bound.
- */
-#define SINGLEUSE
-
-/*
- * One of these structures is malloced to describe the current directory
- * position each time telldir is called. It records the current magic 
- * cookie returned by getdirentries and the offset within the buffer
- * associated with that return value.
- */
-struct ddloc {
-	struct	ddloc *loc_next;/* next structure in list */
-	long	loc_index;	/* key associated with structure */
-	long	loc_seek;	/* magic cookie returned by getdirentries */
-	long	loc_loc;	/* offset of entry in buffer */
-};
-
-#define	NDIRHASH	32	/* Num of hash lists, must be a power of 2 */
-#define	LOCHASH(i)	((i)&(NDIRHASH-1))
-
-static long	dd_loccnt;	/* Index of entry for sequential readdir's */
-static struct	ddloc *dd_hash[NDIRHASH];   /* Hash list heads for ddlocs */
-
-/*
- * return a pointer into a directory
- */
-long
-telldir(dirp)
-	const DIR *dirp;
-{
-	register int index;
-	register struct ddloc *lp;
-
-	if ((lp = (struct ddloc *)malloc(sizeof(struct ddloc))) == NULL)
-		return (-1);
-	index = dd_loccnt++;
-	lp->loc_index = index;
-	lp->loc_seek = dirp->dd_seek;
-	lp->loc_loc = dirp->dd_loc;
-	lp->loc_next = dd_hash[LOCHASH(index)];
-	dd_hash[LOCHASH(index)] = lp;
-	return (index);
-}
-
-/*
- * seek to an entry in a directory.
- * Only values returned by "telldir" should be passed to seekdir.
- */
-void
-_seekdir(dirp, loc)
-	register DIR *dirp;
-	long loc;
-{
-	register struct ddloc *lp;
-	register struct ddloc **prevlp;
-	struct dirent *dp;
-	extern long lseek();
-
-	prevlp = &dd_hash[LOCHASH(loc)];
-	lp = *prevlp;
-	while (lp != NULL) {
-		if (lp->loc_index == loc)
-			break;
-		prevlp = &lp->loc_next;
-		lp = lp->loc_next;
-	}
-	if (lp == NULL)
-		return;
-	if (lp->loc_loc == dirp->dd_loc && lp->loc_seek == dirp->dd_seek)
-		goto found;
-	(void) lseek(dirp->dd_fd, lp->loc_seek, 0);
-	dirp->dd_seek = lp->loc_seek;
-	dirp->dd_loc = 0;
-	while (dirp->dd_loc < lp->loc_loc) {
-		dp = readdir(dirp);
-		if (dp == NULL)
-			break;
-	}
-found:
-#ifdef SINGLEUSE
-	*prevlp = lp->loc_next;
-	free((caddr_t)lp);
-#endif
-}
diff --git a/newlib/libc/sys/sysvi386/time.s b/newlib/libc/sys/sysvi386/time.s
deleted file mode 100644
index c5617891c..000000000
--- a/newlib/libc/sys/sysvi386/time.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_time
-	.globl	time
-_time:
-time:
-	movl	$0xd, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/times.s b/newlib/libc/sys/sysvi386/times.s
deleted file mode 100644
index 007de1e1e..000000000
--- a/newlib/libc/sys/sysvi386/times.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_times
-	.globl	times
-_times:
-times:
-	movl	$0x2b, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/unlink.s b/newlib/libc/sys/sysvi386/unlink.s
deleted file mode 100644
index b85e87c27..000000000
--- a/newlib/libc/sys/sysvi386/unlink.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_unlink
-	.globl	unlink
-_unlink:
-unlink:	
-	movl	$0xa, %eax
-	lcall	$7,$0
-	jb	_cerror
-	xor	%eax, %eax
-	ret
diff --git a/newlib/libc/sys/sysvi386/utime.s b/newlib/libc/sys/sysvi386/utime.s
deleted file mode 100644
index 23fc50476..000000000
--- a/newlib/libc/sys/sysvi386/utime.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_utime
-	.globl	utime
-_utime:
-utime:	
-	movl	$0x1e, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvi386/wait.s b/newlib/libc/sys/sysvi386/wait.s
deleted file mode 100644
index 1ae8b0c6b..000000000
--- a/newlib/libc/sys/sysvi386/wait.s
+++ /dev/null
@@ -1,13 +0,0 @@
-	.globl	_wait
-	.globl	wait
-_wait:
-wait:	
-	movl	$0x7, %eax
-	lcall	$7,$0
-	jb	_cerror
-	movl	4(%esp), %ecx
-	testl	%ecx, %ecx
-	je	bye
-	movl	%edx, (%ecx)
-bye:
-	ret
diff --git a/newlib/libc/sys/sysvi386/waitpid.s b/newlib/libc/sys/sysvi386/waitpid.s
deleted file mode 100644
index 598099f91..000000000
--- a/newlib/libc/sys/sysvi386/waitpid.s
+++ /dev/null
@@ -1,18 +0,0 @@
-	.globl	_waitpid
-	.globl	waitpid
-_waitpid:
-waitpid:	
-	pushfl
-	popl	%eax
-	orl	$0x8c4,%eax
-	pushl	%eax
-	popfl
-	movl	$0x7, %eax
-	lcall	$7,$0
-	jb	_cerror
-	movl	8(%esp), %ecx
-	testl	%ecx, %ecx
-	je	bye
-	movl	%edx, (%ecx)
-bye:
-	ret
diff --git a/newlib/libc/sys/sysvi386/write.s b/newlib/libc/sys/sysvi386/write.s
deleted file mode 100644
index 05374652c..000000000
--- a/newlib/libc/sys/sysvi386/write.s
+++ /dev/null
@@ -1,8 +0,0 @@
-	.globl	_write
-	.globl	write
-_write:
-write:
-	movl	$4, %eax
-	lcall	$7,$0
-	jb	_cerror
-	ret
diff --git a/newlib/libc/sys/sysvnecv70/Makefile.am b/newlib/libc/sys/sysvnecv70/Makefile.am
deleted file mode 100644
index cc0d79411..000000000
--- a/newlib/libc/sys/sysvnecv70/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = ioctl.s isatty.s read.s lseek.s close.s sbrk.s fstat.s \
-	cerror.s exit.s write.s sysv60.s fpx.c fps.s open.s
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/sysvnecv70/Makefile.in b/newlib/libc/sys/sysvnecv70/Makefile.in
deleted file mode 100644
index 35973067a..000000000
--- a/newlib/libc/sys/sysvnecv70/Makefile.in
+++ /dev/null
@@ -1,332 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = ioctl.s isatty.s read.s lseek.s close.s sbrk.s fstat.s \
-	cerror.s exit.s write.s sysv60.s fpx.c fps.s open.s
-
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  ioctl.o isatty.o read.o lseek.o close.o sbrk.o fstat.o \
-cerror.o exit.o write.o sysv60.o fpx.o fps.o open.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/sysvnecv70/aclocal.m4 b/newlib/libc/sys/sysvnecv70/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/sysvnecv70/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/sysvnecv70/cerror.s b/newlib/libc/sys/sysvnecv70/cerror.s
deleted file mode 100644
index 9827c1087..000000000
--- a/newlib/libc/sys/sysvnecv70/cerror.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	cerror
-cerror:	mov.w	r0,_errno
-	neg.w	#1,r0
-	ret	#0
-
-	.data
-	.globl	_errno
-_errno:	.word 0
-
diff --git a/newlib/libc/sys/sysvnecv70/close.s b/newlib/libc/sys/sysvnecv70/close.s
deleted file mode 100644
index 5c80dcd30..000000000
--- a/newlib/libc/sys/sysvnecv70/close.s
+++ /dev/null
@@ -1,10 +0,0 @@
-
-	.globl	__close
-	.globl	_close
-__close:
-_close:	chlvl	#0,#6
-	jnl	ok	
-	jmp	cerror
-ok:	xor.w	r0,r0
-	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/configure b/newlib/libc/sys/sysvnecv70/configure
deleted file mode 100755
index d95fc9958..000000000
--- a/newlib/libc/sys/sysvnecv70/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=sysv60.s
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/sysvnecv70/configure.in b/newlib/libc/sys/sysvnecv70/configure.in
deleted file mode 100644
index 72710998f..000000000
--- a/newlib/libc/sys/sysvnecv70/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/sysvnecv70 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(sysv60.s)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/sysvnecv70/crt0.s b/newlib/libc/sys/sysvnecv70/crt0.s
deleted file mode 100644
index 7c4bc77cf..000000000
--- a/newlib/libc/sys/sysvnecv70/crt0.s
+++ /dev/null
@@ -1,28 +0,0 @@
-	.globl	start
-start:
-	sub.w	#0x8,sp
-	mov.w	0x8[sp],[sp]
-	movea.w	0xc[sp],r0
-	mov.w	r0,0x4[sp]
-tloop:	test.w	[r0+]
-	jne	tloop	
-	cmp.w	r0,[0x4[sp]]
-	jge	l1
-	sub.w	#0x4,r0
-l1:	mov.w	r0,0x8[sp]
-	mov.w	r0,_environ
-
-
-	call	_main,[sp]
-	add.w	#0xc,sp
-	push	r0
-	call	_exit,[sp]
-	add.w	#0x4,sp
-	chlvl	#0,#1
-
-	.data
-
-	.globl	_environ
-_environ:
-	.word	0
-
diff --git a/newlib/libc/sys/sysvnecv70/exit.s b/newlib/libc/sys/sysvnecv70/exit.s
deleted file mode 100644
index a37a17c21..000000000
--- a/newlib/libc/sys/sysvnecv70/exit.s
+++ /dev/null
@@ -1,7 +0,0 @@
-
-	.globl	__exit
-__exit:	chlvl	#0,#1
-	jnl	ok	
-	jmp	cerror
-ok:	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/fps.s b/newlib/libc/sys/sysvnecv70/fps.s
deleted file mode 100644
index 83214dff4..000000000
--- a/newlib/libc/sys/sysvnecv70/fps.s
+++ /dev/null
@@ -1,18 +0,0 @@
-	.globl	_fpgetsticky
-_fpgetsticky:
-	getpsw	  r0
-	and.w	  #0x1f00,r0
-	shl.w	  #0xf8,r0
-	ret	  #0x0
-
-
-	.globl	_fpsetsticky	
-_fpsetsticky:
-	 getpsw	  r0
-	 mov.w	  [ap],r1
-	 shl.w	  #0x8,r1
-	 updpsw.h r1,#0x1f00
-	 trapfl
-	 and.w	  #0x1f00,r0
-	 shl.w	  #0xf8,r0
-	 ret	  #0x0
diff --git a/newlib/libc/sys/sysvnecv70/fpx.c b/newlib/libc/sys/sysvnecv70/fpx.c
deleted file mode 100644
index d55a1e30f..000000000
--- a/newlib/libc/sys/sysvnecv70/fpx.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <ieeefp.h>
-#include <machine/registers.h>
-
-
-fp_except _DEFUN(fpsetmask,(newmask),
-		fp_except newmask)
-
-{
-  fp_except oldmask;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldmask = tkcw.fp_trap;
-  tkcw.fp_trap = newmask;
-  sysv60(0, 8, &tkcw);
-  return oldmask;
-
-}
-
-fp_except _DEFUN_VOID(fpgetmask)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.fp_trap;
-}
-
-
-fp_rnd _DEFUN_VOID(fpgetround)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.fp_rounding;
-}
-
-fp_rnd _DEFUN(fpsetround,(rnd),
-	     fp_rnd rnd)
-{
-  fp_rnd oldrnd;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldrnd = tkcw.fp_rounding;
-  tkcw.fp_rounding = rnd;
-  sysv60(0, 8, &tkcw);
-  return oldrnd;
-}
-
-
-
-
-
-fp_rdi _DEFUN_VOID(fpgetroundtoi)
-{
-  v60_tkcw_type tkcw;
-  sysv60(0, 8, &tkcw);
-  return tkcw.integer_rounding;
-}
-
-fp_rdi _DEFUN(fpsetroundtoi,(rnd),
-	     fp_rdi rnd)
-{
-  fp_rdi oldrnd;
-  v60_tkcw_type tkcw;
-  
-  sysv60(0, 8, &tkcw);
-  oldrnd = tkcw.integer_rounding;
-  tkcw.integer_rounding = rnd;
-  sysv60(0, 8, &tkcw);
-  return oldrnd;
-}
-
-
-
diff --git a/newlib/libc/sys/sysvnecv70/fstat.s b/newlib/libc/sys/sysvnecv70/fstat.s
deleted file mode 100644
index f646859c0..000000000
--- a/newlib/libc/sys/sysvnecv70/fstat.s
+++ /dev/null
@@ -1,11 +0,0 @@
-
-	.globl	__fstat
-	.globl	_fstat
-__fstat:
-_fstat:	chlvl	#0,#0x1c
-	jnl	ok	
-	jmp	cerror
-ok:	xor.w	r0,r0
-	ret	#0
-
-
diff --git a/newlib/libc/sys/sysvnecv70/ioctl.s b/newlib/libc/sys/sysvnecv70/ioctl.s
deleted file mode 100644
index de3aad548..000000000
--- a/newlib/libc/sys/sysvnecv70/ioctl.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	__ioctl
-	.globl	_ioctl
-__ioctl:
-_ioctl:	chlvl	#0,#0x36
-	jnl	ok	
-	jmp	cerror
-ok:	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/isatty.s b/newlib/libc/sys/sysvnecv70/isatty.s
deleted file mode 100644
index 5f2c1d9c8..000000000
--- a/newlib/libc/sys/sysvnecv70/isatty.s
+++ /dev/null
@@ -1,19 +0,0 @@
-	.globl	_isatty
-	.globl	__isatty
-	
-_isatty:
-__isatty:
-	 prepare  #0x14
-	 movea.w  -0x12[fp],[-sp]
-	push	  #0x5401
-	 push	  [ap]
-	 call	  _ioctl,[sp]
-	add.w	  #0xc,sp
-	 test.w	  r0
-	 jge	  ret1
-	 mov.w	  #0x0,r0
-	 dispose
-	 ret	  #0x0
-ret1:	 mov.w	  #0x1,r0
-	dispose
-	ret	#0
diff --git a/newlib/libc/sys/sysvnecv70/lseek.s b/newlib/libc/sys/sysvnecv70/lseek.s
deleted file mode 100644
index 4b55e98e3..000000000
--- a/newlib/libc/sys/sysvnecv70/lseek.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	__lseek
-	.globl	_lseek
-__lseek:
-_lseek:	chlvl	#0,#0x13
-	jnl	ok	
-	jmp	cerror
-ok:	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/open.s b/newlib/libc/sys/sysvnecv70/open.s
deleted file mode 100644
index 20c1ce338..000000000
--- a/newlib/libc/sys/sysvnecv70/open.s
+++ /dev/null
@@ -1,10 +0,0 @@
-
-	.globl	__open
-	.globl	_open
-__open:
-_open:	chlvl	#0,#5
-	jnl	ok	
-	jmp	cerror
-ok:	xor.w	r0,r0
-	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/read.s b/newlib/libc/sys/sysvnecv70/read.s
deleted file mode 100644
index 7d517ab8e..000000000
--- a/newlib/libc/sys/sysvnecv70/read.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	__read
-	.globl	_read
-__read:
-_read:	chlvl	#0,#3
-	jnl	ok	
-	jmp	cerror
-ok:	ret	#0
-
diff --git a/newlib/libc/sys/sysvnecv70/sbrk.s b/newlib/libc/sys/sysvnecv70/sbrk.s
deleted file mode 100644
index 1d5f9242a..000000000
--- a/newlib/libc/sys/sysvnecv70/sbrk.s
+++ /dev/null
@@ -1,34 +0,0 @@
-
-	.globl	_sbrk
-	.globl	__sbrk
-_sbrk:
-__sbrk:
-	mov.w	  tptr,r0
-	 test.w	  [ap]
-	 je	   justreport 
-	 add.w	  r0,[ap]
-	 push	  [ap]
-	 mov.w	  ap,r3
-	 mov.w	  sp,ap
-	 chlvl	  #0x0,#0x11
-	 jnl	 ok 
-	 add.w	  #0x4,sp
-	 jmp	  cerror
-ok:	 add.w	  #0x4,sp
-	 mov.w	  tptr,r0
-	 mov.w	  [r3],tptr
-justreport:
-	ret	  #0x0
-
-	.globl	_brk
-	.globl	__brk
-__brk:
-_brk:	 chlvl	  #0x0,#0x11
-	 jnl	 ok1
-	 jmp	 cerror 
-ok1:	 mov.w	  [ap],63
-	 xor.w	  r0,r0
-	 ret	  #0x0
-	
-		.data
-tptr:	.word	_end
diff --git a/newlib/libc/sys/sysvnecv70/sysv60.s b/newlib/libc/sys/sysvnecv70/sysv60.s
deleted file mode 100644
index 2ab7c7a05..000000000
--- a/newlib/libc/sys/sysvnecv70/sysv60.s
+++ /dev/null
@@ -1,9 +0,0 @@
-	.globl	_sysv60
-_sysv60:
-	chlvl	#0,#0x32
-	jnl	ok
-	jmp	cerror
-ok:	xor.w	r0,r0
-	ret	#0
-
-	
diff --git a/newlib/libc/sys/sysvnecv70/sysvnecv70.tex b/newlib/libc/sys/sysvnecv70/sysvnecv70.tex
deleted file mode 100644
index c2d038aec..000000000
--- a/newlib/libc/sys/sysvnecv70/sysvnecv70.tex
+++ /dev/null
@@ -1,129 +0,0 @@
-@node syscalls,machine,reentrancy,Top
-@chapter NEC V70 system calls
-
-The library needs a certain amount of system-specific support in order
-to operate.  These routines have to be written for each unique
-target environment.  For testing purposes,
-a set of system calls specific to an NEC V70 Unix PC running AT&T Unix
-System V R2 are included.  These files are in the @file{sys/sysvnecv70}
-directory.
-
-All the calls have to be implemented in order to avoid link time
-errors, but the implementation need not include all possible
-functionality; in general, for any functionality that isn't
-available, returning an error code is sufficient.
-
-@section Input/Output
-
-The V70 target may not have any character I/O devices.
-In this case, the @code{fstat}, @code{ioctl}, @code{isatty},
-@code{lseek}, @code{read} and @code{write} routines may all return @code{-1},
-to signal failure (inspect @file{cerror.s} to see how to do this).
-
-Sometimes it is correct to implement the functions in a very
-simple and machine specific way.  For instance, the target board may
-have one serial line.
-
-In this case, the @code{write} system call can be ``hard-wired'' to
-always print to the serial device, no matter what the supplied file
-handle says. Similarly, the other I/O system calls can be written to
-take advantage of a known configuration.
-
-Note that the library starts up assuming that three files are already
-open.  File handles used are:
-@table @code
-@item 0
-Is used for all input from @code{stdin}.
-@item 1
-Is used for all output to @code{stdout}.  This includes functions like
-@code{putc} and @code{printf}.
-@item 2
-Is used for all output to @code{stderr}.  The library will use this
-file to print error messages from the math functions.  Output can
-also be sent to @code{stderr} by @code{fprintf(stderr,@dots{})}
-@end table
-@section Example @code{write} routine
-On a board with a very simple I/O structure, this would be adequate:
-
-@example
-
-@group
-char *duart_status = DUART_ADDR;
-
-void poll()
-@{
-   /* Dummy function to fool optimizer */
-@}				       
-
-int write(fd, string, len)
-int fd;
-char *string;
-int len;				       
-@{
-  int i;
-      
-  for (i = 0; i < len; i++) 
-  @{
-    while (*duart_status & DUART_BUSY)
-     poll();
-    *duart_port = string[i];
-  @}
-  return len;
-@}
-@end group				       
-@end example
-
-@section Memory allocation
-
-The library allocates memory from the heap either for its own use, or when
-you explicitly call @code{malloc}.  It asks the system for
-memory by calling the @code{sbrk} function.  
-
-On a Unix system, @code{sbrk} keeps track of the heap's extent by keeping a
-pointer to the end of the @code{bss} section.  Unix linkers
-traditionaly mark the end of @code{bss} by creating a symbol
-@code{_end}.  When the library wants more memory, it calls
-@code{sbrk} with the size of the request.  @code{sbrk} must then
-perform an operation specific to the target environment, and return a pointer
-to the new area.  For a simple application, the following fragment may
-be sufficient:
-@example
-
-@group
-char *moving_end = &end;
-
-char *sbrk(request)
-int request;
-@{
-  char *return_address;
-
-  return_address = moving_end;
-  moving_end += request;
-  return return_address;
-@}
-@end group
-@end example
-
-@section Initialization and termination
-
-The system dependent support routines are responsible for
-initializing the library for use by an application, and cleaning up
-when the application is complete.
-
-This functionality is traditionally provided in @code{crt0} and
-@code{_exit}.  
-
-The @code{crt0} function usually contains the instructions first run
-by the operating system when an application starts.  The
-@code{crt0} function can take advantage of this and prepare the way
-for the libary.
-
-Another task for @code{crt0} is to call the @code{main} function
-provided by the application writer, and also to call @code{exit} if
-the main function ever returns.
-
-@code{exit} tells the operating system that the application has
-finished.
-
-
-
diff --git a/newlib/libc/sys/sysvnecv70/write.s b/newlib/libc/sys/sysvnecv70/write.s
deleted file mode 100644
index 5b4dfb272..000000000
--- a/newlib/libc/sys/sysvnecv70/write.s
+++ /dev/null
@@ -1,9 +0,0 @@
-
-	.globl	__write
-	.globl	_write
-__write:
-_write:	chlvl	#0,#4
-	jnl	ok	
-	jmp	cerror
-ok:	ret	#0
-
diff --git a/newlib/libc/sys/tic80/Makefile.am b/newlib/libc/sys/tic80/Makefile.am
deleted file mode 100644
index f55a90adb..000000000
--- a/newlib/libc/sys/tic80/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES =
-
-# This is a hack to force automake to include a definition for
-# COMPILE.
-EXTRA_LIBRARIES = libfoo.a
-libfoo_a_SOURCES = crt0.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/tic80/Makefile.in b/newlib/libc/sys/tic80/Makefile.in
deleted file mode 100644
index 60132d684..000000000
--- a/newlib/libc/sys/tic80/Makefile.in
+++ /dev/null
@@ -1,341 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = 
-
-# This is a hack to force automake to include a definition for
-# COMPILE.
-EXTRA_LIBRARIES = libfoo.a
-libfoo_a_SOURCES = crt0.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-libfoo_a_LIBADD = 
-libfoo_a_OBJECTS =  crt0.o
-lib_a_LIBADD = 
-lib_a_OBJECTS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(libfoo_a_SOURCES) $(lib_a_SOURCES)
-OBJECTS = $(libfoo_a_OBJECTS) $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-libfoo.a: $(libfoo_a_OBJECTS) $(libfoo_a_DEPENDENCIES)
-	-rm -f libfoo.a
-	$(AR) cru libfoo.a $(libfoo_a_OBJECTS) $(libfoo_a_LIBADD)
-	$(RANLIB) libfoo.a
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/tic80/aclocal.m4 b/newlib/libc/sys/tic80/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/tic80/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/tic80/configure b/newlib/libc/sys/tic80/configure
deleted file mode 100755
index 73b265e8d..000000000
--- a/newlib/libc/sys/tic80/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt0.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/tic80/configure.in b/newlib/libc/sys/tic80/configure.in
deleted file mode 100644
index 154bd527c..000000000
--- a/newlib/libc/sys/tic80/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/tic80 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(crt0.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/tic80/crt0.c b/newlib/libc/sys/tic80/crt0.c
deleted file mode 100644
index ff25e4a1c..000000000
--- a/newlib/libc/sys/tic80/crt0.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* This is mostly just a placeholder (copied from m88kbug) until we
-   figure out what it really should be... -fnf */
-
-extern int main(int argc, char **argv);
-
-extern char _edata;
-extern char _end;
-extern char stack;
-
-_start()
-{
-  char *p;
-
-  p = &_edata + 1;
-  while (p < &_end) 
-    {
-      *p++ = 0;
-    }
-
-  main(0, 0);
-  _exit();
-}
diff --git a/newlib/libc/sys/w65/Makefile.am b/newlib/libc/sys/w65/Makefile.am
deleted file mode 100644
index db6b81665..000000000
--- a/newlib/libc/sys/w65/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/w65/Makefile.in b/newlib/libc/sys/w65/Makefile.in
deleted file mode 100644
index 842f87f07..000000000
--- a/newlib/libc/sys/w65/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = syscalls.c trap.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  syscalls.o trap.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/w65/aclocal.m4 b/newlib/libc/sys/w65/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/w65/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/w65/configure b/newlib/libc/sys/w65/configure
deleted file mode 100755
index 524ca6636..000000000
--- a/newlib/libc/sys/w65/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=trap.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/w65/configure.in b/newlib/libc/sys/w65/configure.in
deleted file mode 100644
index 1c62fcb84..000000000
--- a/newlib/libc/sys/w65/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/w65 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(trap.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/w65/crt0.c b/newlib/libc/sys/w65/crt0.c
deleted file mode 100644
index b7598973b..000000000
--- a/newlib/libc/sys/w65/crt0.c
+++ /dev/null
@@ -1,16 +0,0 @@
-
-
-int p;
-extern int edata;
-extern int end;
-start()
-{
-int  *s;
-  asm ("lda #stack");
-  asm ("tcs");
-  for (s = &edata; s != &end; s++)
-    *s = 0;
-
-  main();
-  exit(0);
-}
diff --git a/newlib/libc/sys/w65/sys/syscall.h b/newlib/libc/sys/w65/sys/syscall.h
deleted file mode 100644
index f141df764..000000000
--- a/newlib/libc/sys/w65/sys/syscall.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#define	SYS_exit	1
-#define	SYS_fork	2
-
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
-#define	SYS_stat	38
-
-#define	SYS_pipe	42
-#define	SYS_execve	59
-
-#define SYS_utime       201 /* not really a system call */
-#define SYS_wait        202 /* nor is this */
diff --git a/newlib/libc/sys/w65/syscalls.c b/newlib/libc/sys/w65/syscalls.c
deleted file mode 100644
index 4f5b108b1..000000000
--- a/newlib/libc/sys/w65/syscalls.c
+++ /dev/null
@@ -1,191 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "sys/syscall.h"
-int errno;
-
-
-
-int
-_read (int file,
-       char *ptr,
-       int len)
-{
-  return __trap3 (SYS_read, file, ptr, len);
-}
-
-
-int
-_lseek (int file,
-	int ptr,
-	int dir)
-{
-  return __trap3 (SYS_lseek, file, ptr, dir);
-}
-
-static
-writechar (char c)
-{
-  asm ("lda %0" : : "r" (c));
-  asm ("wdm");
-}
-
-
-
-int
-_write (
-	 int file,
-	 char *ptr,
-	 int len)
-{
-  return __trap3 (SYS_write, file, ptr, len);
-}
-
-
-
-int
-_close (int file)
-{
-  return __trap3 (SYS_close, file, 0, 0);
-}
-
-
-
-caddr_t
-_sbrk (int incr)
-{
-  extern char end;		/* Defined by the linker */
-  static char *heap_end;
-  char *prev_heap_end;
-
-  if (heap_end == 0)
-    {
-      heap_end = &end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end + incr > stack_ptr)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-      abort ();
-    }
-
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
-
-
-
-
-int
-_fstat (int file,
-	struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-
-int
-_open (
-	char *path,
-	int flags)
-{
-  return __trap3 (SYS_open, path, flags, 0);
-}
-
-int
-_unlink ()
-{
-  return -1;
-}
-
-isatty (fd)
-     int fd;
-{
-  return 1;
-}
-
-
-
-_exit (n)
-{
-  return __trap3 (SYS_exit, n, 0, 0);
-}
-
-
-_kill (n, m)
-{
-  return __trap3 (SYS_exit, 0xdead, 0, 0);
-}
-
-
-_getpid (n)
-{
-  return 1;
-}
-
-
-
-
-_raise ()
-{
-
-}
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  return _trap3 (SYS_stat, path, st, 0);
-}
-
-int
-_chmod (const char *path, short mode)
-{
-  return _trap3 (SYS_chmod, path, mode);
-}
-
-int
-_chown (const char *path, short owner, short group)
-{
-  return _trap3 (SYS_chown, path, owner, group);
-}
-
-int
-_utime (path, times)
-     const char *path;
-     char *times;
-{
-  return _trap3 (SYS_utime, path, times);
-}
-
-int
-_fork ()
-{
-  return _trap3 (SYS_fork);
-}
-
-int
-_wait (statusp)
-     int *statusp;
-{
-  return _trap3 (SYS_wait);
-}
-
-int
-_execve (const char *path, char *const argv[], char *const envp[])
-{
-  return _trap3 (SYS_execve, path, argv, envp);
-}
-
-int
-_execv (const char *path, char *const argv[])
-{
-  return _trap3 (SYS_execv, path, argv);
-}
-
-int
-_pipe (int *fd)
-{
-  return _trap3 (SYS_pipe, fd);
-}
diff --git a/newlib/libc/sys/w65/trap.c b/newlib/libc/sys/w65/trap.c
deleted file mode 100644
index 1f49999bb..000000000
--- a/newlib/libc/sys/w65/trap.c
+++ /dev/null
@@ -1,15 +0,0 @@
-
-
-
-_trap3()
-{
-
-}
-
-
-__trap3(a1,a2,a3,a4,a5,a6)
-{
-  asm ("ldx #r0");
-  asm ("wdm");
-}
-
diff --git a/newlib/libc/sys/z8ksim/Makefile.am b/newlib/libc/sys/z8ksim/Makefile.am
deleted file mode 100644
index 184707d97..000000000
--- a/newlib/libc/sys/z8ksim/Makefile.am
+++ /dev/null
@@ -1,14 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = glue.c
-
-all: crt0.o
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/z8ksim/Makefile.in b/newlib/libc/sys/z8ksim/Makefile.in
deleted file mode 100644
index 63cc87375..000000000
--- a/newlib/libc/sys/z8ksim/Makefile.in
+++ /dev/null
@@ -1,329 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-EXEEXT = @EXEEXT@
-LDFLAGS = @LDFLAGS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-noinst_LIBRARIES = lib.a
-
-lib_a_SOURCES = glue.c
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_OBJECTS =  glue.o
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES)
-OBJECTS = $(lib_a_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-tags distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all: crt0.o
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/sys/z8ksim/aclocal.m4 b/newlib/libc/sys/z8ksim/aclocal.m4
deleted file mode 100644
index 8e46a11f3..000000000
--- a/newlib/libc/sys/z8ksim/aclocal.m4
+++ /dev/null
@@ -1,334 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
diff --git a/newlib/libc/sys/z8ksim/configure b/newlib/libc/sys/z8ksim/configure
deleted file mode 100755
index d6816ae37..000000000
--- a/newlib/libc/sys/z8ksim/configure
+++ /dev/null
@@ -1,1888 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=glue.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:588: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:641: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:731: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 736 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:764: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:944: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:965: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:983: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1026: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1039: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1052: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1065: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1078: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1133: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1182: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1333: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1378: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1466: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libc/sys/z8ksim/configure.in b/newlib/libc/sys/z8ksim/configure.in
deleted file mode 100644
index ce23fd612..000000000
--- a/newlib/libc/sys/z8ksim/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl This is the newlib/libc/sys/z8ksim configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(glue.c)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libc/sys/z8ksim/crt0.c b/newlib/libc/sys/z8ksim/crt0.c
deleted file mode 100644
index f9aad6d95..000000000
--- a/newlib/libc/sys/z8ksim/crt0.c
+++ /dev/null
@@ -1,58 +0,0 @@
-extern char _start_bss;
-extern char _end_bss;
-extern int main(int argc, char **argv, char **environ);
-void __main();
-
-static void
-enter()
-{
-#if defined(__Z8002__)
-  __main();
-#endif
-  exit(main(0,0,0));
-}
-start()
-{
-  char *p;
-#if defined(__Z8002__)
-  asm("ld	r15,#__stack_top");
-  asm("ld	r10,r15");
-#endif
-#if defined(__Z8001__)
-  asm("ldl	rr14,#__stack_top");
-  asm("ldl	rr10,rr14");
-#endif
-
-
-  /* zero bss */
-  p = &_start_bss;
-  while (p < & _end_bss) 
-  {
-    *p++ = 0;
-  }
-  enter();
-}
-
-#if defined(__Z8002__)
-void __do_global_ctors ()
-{
-  typedef void (*pfunc)();
-  extern pfunc __ctors[];
-  extern pfunc __ctors_end[];
-  pfunc *p;
-  for (p = __ctors_end; p > __ctors; )
-    {
-      (*--p)();
-    }
-}
-
-void __main()
-{
-  static int initialized;
-  if (! initialized)
-    {
-      initialized = 1;
-      __do_global_ctors ();
-    }
-}
-#endif
diff --git a/newlib/libc/sys/z8ksim/glue.c b/newlib/libc/sys/z8ksim/glue.c
deleted file mode 100644
index b3b0bab07..000000000
--- a/newlib/libc/sys/z8ksim/glue.c
+++ /dev/null
@@ -1,156 +0,0 @@
-#include "sys/syscall.h"
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <_ansi.h>
-#include <errno.h>
-
-extern char _start_heap;
-extern char _end_heap;
-extern char _start_bss;
-extern char _end_bss;
-
-
-static int argl(long value)
-{
-  asm("ld r0,%H0" : : "r" (value));
-  asm("ld r1,%I0" : : "r" (value));
-  asm("sc %0" : : "i" (SYS_ARG)); 
-}
-
-
-static int argw(value)
-{
-  asm("ld r1,%H0" : : "r" ( value));
-  asm("ld  r0,#0");
-  asm("sc %0" : : "i" (SYS_ARG)); 
-}
-
-static int argp(void *value)
-{
-#ifdef __Z8001__  
-  asm("ld r0,%H0" : : "r" (value));
-  asm("ld r1,%I0" : : "r" (value));
-#else
-  asm("ld r1,%H0" : : "r" ( value));
-  asm("ld  r0,#0");
-#endif
-  asm("sc %0" : : "i" (SYS_ARG)); 
-
-}
-
-
-
-#define ARGL(n, value)  argl(value)
-#define ARGW(n, value)  argw(value)
-#define ARGP(n, value) argp(value)
-
-#define MACRO(n) asm("sc %0" : : "i" (n));
-
-int _read (int fd, char *buf,size_t nbytes)
-{
-  ARGW(0,fd);
-  ARGP(1,buf);
-  ARGP(2,(void *)(nbytes));
-  MACRO(SYS_read);
-}
-
-int _write (int fd, char *buf, size_t nbytes)
-{
-  ARGW(0,fd);
-  ARGP(1,buf);
-  ARGP(2,(void *)(nbytes));
-  MACRO(SYS_write);
-}
-
-int _open (const char *buf, int flags, int mode)
-{
-  ARGP(0, buf);
-  ARGW(1, flags);
-  ARGW(2, mode);
-  MACRO(SYS_open);
-}
-
-int _close (int fd)
-{
-  ARGW(0,fd);
-  MACRO(SYS_close );
-}
-
-/*
- * sbrk -- changes heap size size. Get nbytes more
- *         RAM. We just increment a pointer in what's
- *         left of memory on the board.
- */
-caddr_t _sbrk (size_t nbytes)
-{
-  static char* heap_ptr = NULL;
-  caddr_t        base;
-
-  if (heap_ptr == NULL) {
-    heap_ptr = (caddr_t)&_start_heap;
-  }
-
-  if (heap_ptr + nbytes < &_end_heap) {
-    base = heap_ptr;
-    heap_ptr += nbytes;
-    return (heap_ptr);
-  } else {
-    errno = ENOMEM;
-    return ((caddr_t)-1);
-  }
-}
-
-int isatty (int fd)
-{
-  ARGW(0,fd);
-  MACRO(SYS_isatty);
-}
-
-off_t _lseek (int fd,  off_t offset, int whence)
-{
-  ARGW(0,fd);
-  ARGL(1,offset);
-  ARGW(2, whence);
-  MACRO(SYS_lseek);
-}
-
-int _fstat (int fd, struct stat *buf)
-{
-  ARGW(0,fd);
-  ARGP(1,buf);
-  MACRO(SYS_fstat);
-}
-
-
-
-
-int
-_exit(int val)
-{
-  ARGW(0,val);
-  MACRO(SYS_exit);
-}
-
-time_t _time(time_t *timer)
-{
-  ARGP(0,timer);
-  MACRO(SYS_time);
-}
-
-int
-_creat (const char *path, int mode)
-{
-  ARGP(0, path);
-  ARGW(1, mode);
-  MACRO(SYS_creat);
-}
-
-_kill(int pid, int val)
-{
-  _exit(val);
-}
-
-_getpid() 
-{
-  return 1;
-}
diff --git a/newlib/libc/sys/z8ksim/sys/syscall.h b/newlib/libc/sys/z8ksim/sys/syscall.h
deleted file mode 100644
index 9631a73bd..000000000
--- a/newlib/libc/sys/z8ksim/sys/syscall.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#define	SYS_exit	1
-#define	SYS_fork	2
-#define	SYS_read	3
-#define	SYS_write	4
-#define	SYS_open	5
-#define	SYS_close	6
-#define	SYS_wait4	7
-#define	SYS_creat	8
-#define	SYS_link	9
-#define	SYS_unlink	10
-#define	SYS_execv	11
-#define	SYS_chdir	12
-#define	SYS_mknod	14
-#define	SYS_chmod	15
-#define	SYS_chown	16
-#define	SYS_lseek	19
-#define	SYS_getpid	20
-#define SYS_isatty      21
-#define SYS_fstat       22
-#define SYS_time 	23
-
-
-#define SYS_ARG		24
diff --git a/newlib/libc/syscalls/Makefile.am b/newlib/libc/syscalls/Makefile.am
deleted file mode 100644
index e9e5742e2..000000000
--- a/newlib/libc/syscalls/Makefile.am
+++ /dev/null
@@ -1,72 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	sysclose.c	\
-	sysfcntl.c	\
-	sysfstat.c	\
-	sysgetpid.c	\
-	sysgettod.c	\
-	syskill.c	\
-	syslink.c	\
-	syslseek.c	\
-	sysopen.c	\
-	sysread.c	\
-	syssbrk.c	\
-	sysstat.c	\
-	systimes.c	\
-	sysunlink.c	\
-	syswrite.c
-
-
-## Weed out EL/IX level 3 interfaces if necessary
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS =
-else
-LIB_OBJS = \
-	sysexecve.$(oext)	\
-	sysfork.$(oext)		\
-	syswait.$(oext)
-endif
-endif
-
-libsyscalls_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libsyscalls.la
-libsyscalls_la_SOURCES = $(GENERAL_SOURCES)
-libsyscalls_la_LIBADD = $(LIB_OBJS)
-libsyscalls_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES =
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-# No doc for syscalls.
-doc:
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/syscalls/Makefile.in b/newlib/libc/syscalls/Makefile.in
deleted file mode 100644
index ab02c69f3..000000000
--- a/newlib/libc/syscalls/Makefile.in
+++ /dev/null
@@ -1,422 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	sysclose.c	\
-	sysfcntl.c	\
-	sysfstat.c	\
-	sysgetpid.c	\
-	sysgettod.c	\
-	syskill.c	\
-	syslink.c	\
-	syslseek.c	\
-	sysopen.c	\
-	sysread.c	\
-	syssbrk.c	\
-	sysstat.c	\
-	systimes.c	\
-	sysunlink.c	\
-	syswrite.c
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@\
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@	sysexecve.$(oext)	\
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@	sysfork.$(oext)		\
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@	syswait.$(oext)
-
-libsyscalls_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libsyscalls.la
-@USE_LIBTOOL_TRUE@libsyscalls_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libsyscalls_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libsyscalls_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = 
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  sysclose.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysfcntl.$(OBJEXT) sysfstat.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysgetpid.$(OBJEXT) sysgettod.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@syskill.$(OBJEXT) syslink.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@syslseek.$(OBJEXT) sysopen.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysread.$(OBJEXT) syssbrk.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysstat.$(OBJEXT) systimes.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sysunlink.$(OBJEXT) syswrite.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libsyscalls_la_OBJECTS =  sysclose.lo sysfcntl.lo \
-@USE_LIBTOOL_TRUE@sysfstat.lo sysgetpid.lo sysgettod.lo syskill.lo \
-@USE_LIBTOOL_TRUE@syslink.lo syslseek.lo sysopen.lo sysread.lo \
-@USE_LIBTOOL_TRUE@syssbrk.lo sysstat.lo systimes.lo sysunlink.lo \
-@USE_LIBTOOL_TRUE@syswrite.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libsyscalls_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libsyscalls_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus syscalls/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libsyscalls.la: $(libsyscalls_la_OBJECTS) $(libsyscalls_la_DEPENDENCIES)
-	$(LINK)  $(libsyscalls_la_LDFLAGS) $(libsyscalls_la_OBJECTS) $(libsyscalls_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = syscalls
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-# No doc for syscalls.
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/syscalls/sysclose.c b/newlib/libc/syscalls/sysclose.c
deleted file mode 100644
index 90f321fc0..000000000
--- a/newlib/libc/syscalls/sysclose.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* connector for close */
-
-#include <reent.h>
-
-int
-_DEFUN (close, (fd),
-     int fd)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _close_r (_REENT, fd);
-#else
-  return _close (fd);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysexecve.c b/newlib/libc/syscalls/sysexecve.c
deleted file mode 100644
index a43b47a0b..000000000
--- a/newlib/libc/syscalls/sysexecve.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* connector for execve */
-
-#include <reent.h>
-
-int
-_DEFUN (execve, (name, argv, env),
-     char *name _AND
-     char **argv _AND
-     char **env)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _execve_r (_REENT, name, argv, env);
-#else
-  return _execve (name, argv, env);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysfcntl.c b/newlib/libc/syscalls/sysfcntl.c
deleted file mode 100644
index 5e6de7e77..000000000
--- a/newlib/libc/syscalls/sysfcntl.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* connector for fcntl */
-/* only called from stdio/fdopen.c, so arg can be int. */
-
-#include <reent.h>
-#include <errno.h>
-
-int
-_DEFUN (fcntl, (fd, flag, arg),
-     int fd _AND
-     int flag _AND
-     int arg)
-{
-#ifdef HAVE_FCNTL
-# ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _fcntl_r (_REENT, fd, flag, arg);
-# else
-  return _fcntl (fd, flag, arg);
-# endif
-#else /* !HAVE_FCNTL */
-  errno = ENOSYS;
-  return -1;
-#endif /* !HAVE_FCNTL */
-}
diff --git a/newlib/libc/syscalls/sysfork.c b/newlib/libc/syscalls/sysfork.c
deleted file mode 100644
index 96d23c7dd..000000000
--- a/newlib/libc/syscalls/sysfork.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* connector for fork */
-
-/* Don't define this if NO_FORK.  See for example libc/sys/win32/spawn.c.  */
-
-#ifndef NO_FORK
-
-#include <reent.h>
-
-int
-_DEFUN_VOID (fork)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _fork_r (_REENT);
-#else
-  return _fork ();
-#endif
-}
-
-#endif
diff --git a/newlib/libc/syscalls/sysfstat.c b/newlib/libc/syscalls/sysfstat.c
deleted file mode 100644
index 7d446e825..000000000
--- a/newlib/libc/syscalls/sysfstat.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* connector for fstat */
-
-#include <reent.h>
-#include <unistd.h>
-
-int
-_DEFUN (fstat, (fd, pstat),
-     int fd _AND
-     struct stat *pstat)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _fstat_r (_REENT, fd, pstat);
-#else
-  return _fstat (fd, pstat);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysgetpid.c b/newlib/libc/syscalls/sysgetpid.c
deleted file mode 100644
index 794f5194b..000000000
--- a/newlib/libc/syscalls/sysgetpid.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/* connector for getpid */
-
-#include <reent.h>
-
-int
-_DEFUN_VOID (getpid)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _getpid_r (_REENT);
-#else
-  return _getpid ();
-#endif
-}
diff --git a/newlib/libc/syscalls/sysgettod.c b/newlib/libc/syscalls/sysgettod.c
deleted file mode 100644
index 9208a30b9..000000000
--- a/newlib/libc/syscalls/sysgettod.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* connector for gettimeofday */
-
-#include <reent.h>
-#include <sys/types.h>
-#include <sys/times.h>
-
-struct timeval;
-struct timezone;
-
-int
-_DEFUN (gettimeofday, (ptimeval, ptimezone),
-     struct timeval *ptimeval _AND
-     struct timezone *ptimezone)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _gettimeofday_r (_REENT, ptimeval, ptimezone);
-#else
-  return _gettimeofday (ptimeval, ptimezone);
-#endif
-}
diff --git a/newlib/libc/syscalls/syskill.c b/newlib/libc/syscalls/syskill.c
deleted file mode 100644
index 15cfecba8..000000000
--- a/newlib/libc/syscalls/syskill.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* connector for kill */
-
-#include <reent.h>
-
-int
-_DEFUN (kill, (pid, sig),
-     int pid _AND
-     int sig)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _kill_r (_REENT, pid, sig);
-#else
-  return _kill (pid, sig);
-#endif
-}
diff --git a/newlib/libc/syscalls/syslink.c b/newlib/libc/syscalls/syslink.c
deleted file mode 100644
index df235eeaa..000000000
--- a/newlib/libc/syscalls/syslink.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* connector for link */
-
-#include <reent.h>
-
-int
-_DEFUN (link, (old, new),
-     char *old _AND
-     char *new)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _link_r (_REENT, old, new);
-#else
-  return _link (old, new);
-#endif
-}
diff --git a/newlib/libc/syscalls/syslseek.c b/newlib/libc/syscalls/syslseek.c
deleted file mode 100644
index a1722471c..000000000
--- a/newlib/libc/syscalls/syslseek.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* connector for lseek */
-
-#include <reent.h>
-#include <unistd.h>
-
-off_t
-_DEFUN (lseek, (fd, pos, whence),
-     int fd _AND
-     off_t pos _AND
-     int whence)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _lseek_r (_REENT, fd, pos, whence);
-#else
-  return _lseek (fd, pos, whence);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysopen.c b/newlib/libc/syscalls/sysopen.c
deleted file mode 100644
index 7e7df995f..000000000
--- a/newlib/libc/syscalls/sysopen.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* connector for open */
-
-#include <reent.h>
-#include <fcntl.h>
-
-#ifdef _HAVE_STDC
-
-/* The prototype in <fcntl.h> uses ..., so we must correspond.  */
-
-#include <stdarg.h>
-
-int
-_DEFUN (open, (file, flags, ...),
-        const char *file _AND
-        int flags _DOTS)
-{
-  va_list ap;
-  int ret;
-
-  va_start (ap, flags);
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  ret = _open_r (_REENT, file, flags, va_arg (ap, int));
-#else
-  ret = _open (file, flags, va_arg (ap, int));
-#endif
-  va_end (ap);
-  return ret;
-}
-
-#else /* ! _HAVE_STDC */
-
-int 
-open (file, flags, mode)
-     const char *file;
-     int flags;
-     int mode;
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _open_r (_REENT, file, flags, mode);
-#else
-  return _open (file, flags, mode);
-#endif
-}
-
-#endif /* ! _HAVE_STDC */
diff --git a/newlib/libc/syscalls/sysread.c b/newlib/libc/syscalls/sysread.c
deleted file mode 100644
index ae19f5b46..000000000
--- a/newlib/libc/syscalls/sysread.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* connector for read */
-
-#include <reent.h>
-#include <unistd.h>
-
-_READ_WRITE_RETURN_TYPE
-_DEFUN (read, (fd, buf, cnt),
-     int fd _AND
-     void *buf _AND
-     size_t cnt)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _read_r (_REENT, fd, buf, cnt);
-#else
-  return _read (fd, buf, cnt);
-#endif
-}
diff --git a/newlib/libc/syscalls/syssbrk.c b/newlib/libc/syscalls/syssbrk.c
deleted file mode 100644
index de368678e..000000000
--- a/newlib/libc/syscalls/syssbrk.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* connector for sbrk */
-
-#include <reent.h>
-#include <unistd.h>
-
-extern void *_sbrk_r (struct _reent *, ptrdiff_t);
-extern void *_sbrk (ptrdiff_t);
-
-void *
-_DEFUN (sbrk, (incr),
-     ptrdiff_t incr)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _sbrk_r (_REENT, incr);
-#else
-  return _sbrk (incr);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysstat.c b/newlib/libc/syscalls/sysstat.c
deleted file mode 100644
index e2247dcf0..000000000
--- a/newlib/libc/syscalls/sysstat.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* connector for stat */
-
-#include <reent.h>
-#include <unistd.h>
-
-int
-_DEFUN (stat, (file, pstat),
-     char *file _AND
-     struct stat *pstat)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _stat_r (_REENT, file, pstat);
-#else
-  return _stat (file, pstat);
-#endif
-}
diff --git a/newlib/libc/syscalls/systimes.c b/newlib/libc/syscalls/systimes.c
deleted file mode 100644
index 353553be7..000000000
--- a/newlib/libc/syscalls/systimes.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* connector for times */
-
-#include <reent.h>
-#include <sys/times.h>
-
-clock_t
-_DEFUN (times, (buf),
-     struct tms *buf)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _times_r (_REENT, buf);
-#else
-  return _times (buf);
-#endif
-}
diff --git a/newlib/libc/syscalls/sysunlink.c b/newlib/libc/syscalls/sysunlink.c
deleted file mode 100644
index ac04184f2..000000000
--- a/newlib/libc/syscalls/sysunlink.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* connector for unlink */
-
-#include <reent.h>
-
-int
-_DEFUN (unlink, (file),
-        char *file)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _unlink_r (_REENT, file);
-#else
-  return _unlink (file);
-#endif
-}
diff --git a/newlib/libc/syscalls/syswait.c b/newlib/libc/syscalls/syswait.c
deleted file mode 100644
index 355906c37..000000000
--- a/newlib/libc/syscalls/syswait.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* connector for wait */
-
-#include <reent.h>
-
-int
-_DEFUN (wait, (status),
-        int *status)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _wait_r (_REENT, status);
-#else
-  return _wait (status);
-#endif
-}
diff --git a/newlib/libc/syscalls/syswrite.c b/newlib/libc/syscalls/syswrite.c
deleted file mode 100644
index 089975958..000000000
--- a/newlib/libc/syscalls/syswrite.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* connector for write */
-
-#include <reent.h>
-#include <unistd.h>
-
-_READ_WRITE_RETURN_TYPE
-_DEFUN (write, (fd, buf, cnt),
-     int fd _AND
-     const void *buf _AND
-     size_t cnt)
-{
-#ifdef REENTRANT_SYSCALLS_PROVIDED
-  return _write_r (_REENT, fd, buf, cnt);
-#else
-  return _write (fd, buf, cnt);
-#endif
-}
diff --git a/newlib/libc/time/Makefile.am b/newlib/libc/time/Makefile.am
deleted file mode 100644
index 3735def7c..000000000
--- a/newlib/libc/time/Makefile.am
+++ /dev/null
@@ -1,67 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	asctime.c	\
-	asctime_r.c	\
-	clock.c		\
-	ctime.c		\
-	ctime_r.c	\
-	difftime.c	\
-	gmtime.c	\
-	gmtime_r.c	\
-	lcltime.c	\
-	lcltime_r.c	\
-	mktime.c	\
-	mktm_r.c	\
-	strftime.c  	\
-	strptime.c	\
-	time.c		\
-	tzlock.c	\
-	tzset.c		\
-	tzset_r.c
-
-libtime_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libtime.la
-libtime_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES = \
-	asctime.def	\
-	clock.def 	\
-	ctime.def	\
-	difftime.def	\
-	gmtime.def	\
-	lcltime.def	\
-	mktime.def	\
-	strftime.def	\
-	time.def	\
-	tzlock.def	\
-	tzset.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/time.tex >> $(TARGETDOC)
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/time/Makefile.in b/newlib/libc/time/Makefile.in
deleted file mode 100644
index 8fe997b28..000000000
--- a/newlib/libc/time/Makefile.in
+++ /dev/null
@@ -1,429 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	asctime.c	\
-	asctime_r.c	\
-	clock.c		\
-	ctime.c		\
-	ctime_r.c	\
-	difftime.c	\
-	gmtime.c	\
-	gmtime_r.c	\
-	lcltime.c	\
-	lcltime_r.c	\
-	mktime.c	\
-	mktm_r.c	\
-	strftime.c  	\
-	strptime.c	\
-	time.c		\
-	tzlock.c	\
-	tzset.c		\
-	tzset_r.c
-
-
-libtime_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libtime.la
-@USE_LIBTOOL_TRUE@libtime_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-CHEWOUT_FILES = \
-	asctime.def	\
-	clock.def 	\
-	ctime.def	\
-	difftime.def	\
-	gmtime.def	\
-	lcltime.def	\
-	mktime.def	\
-	strftime.def	\
-	time.def	\
-	tzlock.def	\
-	tzset.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  asctime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@asctime_r.$(OBJEXT) clock.$(OBJEXT) ctime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ctime_r.$(OBJEXT) difftime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@gmtime.$(OBJEXT) gmtime_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@lcltime.$(OBJEXT) lcltime_r.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@mktime.$(OBJEXT) mktm_r.$(OBJEXT) strftime.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@strptime.$(OBJEXT) time.$(OBJEXT) tzlock.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@tzset.$(OBJEXT) tzset_r.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libtime_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libtime_la_OBJECTS =  asctime.lo asctime_r.lo clock.lo \
-@USE_LIBTOOL_TRUE@ctime.lo ctime_r.lo difftime.lo gmtime.lo gmtime_r.lo \
-@USE_LIBTOOL_TRUE@lcltime.lo lcltime_r.lo mktime.lo mktm_r.lo \
-@USE_LIBTOOL_TRUE@strftime.lo strptime.lo time.lo tzlock.lo tzset.lo \
-@USE_LIBTOOL_TRUE@tzset_r.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libtime_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libtime_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus time/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libtime.la: $(libtime_la_OBJECTS) $(libtime_la_DEPENDENCIES)
-	$(LINK)  $(libtime_la_LDFLAGS) $(libtime_la_OBJECTS) $(libtime_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = time
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(CHEWOUT_FILES)
-	cat $(srcdir)/time.tex >> $(TARGETDOC)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/time/asctime.c b/newlib/libc/time/asctime.c
deleted file mode 100644
index e4011856d..000000000
--- a/newlib/libc/time/asctime.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * asctime.c
- * Original Author:	G. Haley
- *
- * Converts the broken down time in the structure pointed to by tim_p into a
- * string of the form
- *
- * Wed Jun 15 11:38:07 1988\n\0
- *
- * Returns a pointer to the string.
- */
-
-/*
-FUNCTION
-<<asctime>>---format time as string
-
-INDEX
-	asctime
-INDEX
-	_asctime_r
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	char *asctime(const struct tm *<[clock]>);
-	char *asctime_r(const struct tm *<[clock]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	char *asctime(<[clock]>)
-	struct tm *<[clock]>;
-	char *asctime_r(<[clock]>)
-	struct tm *<[clock]>;
-	char *<[buf]>;
-
-DESCRIPTION
-Format the time value at <[clock]> into a string of the form
-. Wed Jun 15 11:38:07 1988\n\0
-The string is generated in a static buffer; each call to <<asctime>>
-overwrites the string generated by previous calls.
-
-RETURNS
-A pointer to the string containing a formatted timestamp.
-
-PORTABILITY
-ANSI C requires <<asctime>>.
-
-<<asctime>> requires no supporting OS subroutines.
-*/
-
-#include <time.h>
-#include <_ansi.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-char *
-_DEFUN (asctime, (tim_p),
-	_CONST struct tm *tim_p)
-{
-  _REENT_CHECK_ASCTIME_BUF(_REENT);
-  return asctime_r (tim_p, _REENT_ASCTIME_BUF(_REENT));
-}
-
-#endif
diff --git a/newlib/libc/time/asctime_r.c b/newlib/libc/time/asctime_r.c
deleted file mode 100644
index 2c02667e6..000000000
--- a/newlib/libc/time/asctime_r.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * asctime_r.c
- */
-
-#include <stdio.h>
-#include <time.h>
-
-char *
-_DEFUN (asctime_r, (tim_p, result),
-	_CONST struct tm *tim_p _AND
-	char *result)
-{
-  static _CONST char day_name[7][3] = {
-	"Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
-  };
-  static _CONST char mon_name[12][3] = {
-	"Jan", "Feb", "Mar", "Apr", "May", "Jun", 
-	"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
-  };
-
-  sprintf (result, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
-	   day_name[tim_p->tm_wday], 
-	   mon_name[tim_p->tm_mon],
-	   tim_p->tm_mday, tim_p->tm_hour, tim_p->tm_min,
-	   tim_p->tm_sec, 1900 + tim_p->tm_year);
-  return result;
-}
diff --git a/newlib/libc/time/clock.c b/newlib/libc/time/clock.c
deleted file mode 100644
index 64cf438fb..000000000
--- a/newlib/libc/time/clock.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* NetWare can not use this implementation of clock, since it does not
-   have times or any similar function.  It provides its own version of
-   clock in clib.nlm.  If we can not use clib.nlm, then we must write
-   clock in sys/netware.  */
-
-#ifdef CLOCK_PROVIDED
-
-int _dummy_clock = 1;
-
-#else
-
-/*
- * clock.c
- * Original Author:	G. Haley
- *
- * Determines the processor time used by the program since invocation. The time
- * in seconds is the value returned divided by the value of the macro CLK_TCK.
- * If the processor time used is not available, (clock_t) -1 is returned.
- */
-
-/*
-FUNCTION
-<<clock>>---cumulative processor time
-
-INDEX
-	clock
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	clock_t clock(void);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	clock_t clock();
-
-DESCRIPTION
-Calculates the best available approximation of the cumulative amount
-of time used by your program since it started.  To convert the result
-into seconds, divide by the macro <<CLOCKS_PER_SEC>>.
-
-RETURNS
-The amount of processor time used so far by your program, in units
-defined by the machine-dependent macro <<CLOCKS_PER_SEC>>.  If no
-measurement is available, the result is (clock_t)<<-1>>.
-
-PORTABILITY
-ANSI C requires <<clock>> and <<CLOCKS_PER_SEC>>.
-
-Supporting OS subroutine required: <<times>>.
-*/
-
-#include <time.h>
-#include <sys/times.h>
-#include <reent.h>
-
-clock_t 
-clock ()
-{
-  struct tms tim_s;
-  clock_t res;
-
-  if ((res = (clock_t) _times_r (_REENT, &tim_s)) != -1)
-    res = (clock_t) (tim_s.tms_utime + tim_s.tms_stime +
-		     tim_s.tms_cutime + tim_s.tms_cstime);
-
-  return res;
-}
-
-#endif /* CLOCK_PROVIDED */
diff --git a/newlib/libc/time/ctime.c b/newlib/libc/time/ctime.c
deleted file mode 100644
index 63954c640..000000000
--- a/newlib/libc/time/ctime.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * ctime.c
- * Original Author:	G. Haley
- */
-
-/*
-FUNCTION
-<<ctime>>---convert time to local and format as string
-
-INDEX
-	ctime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	char *ctime(const time_t *<[clock]>);
-	char *ctime_r(const time_t *<[clock]>, char *<[buf]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	char *ctime(<[clock]>)
-	time_t *<[clock]>;
-
-	char *ctime_r(<[clock]>, <[buf]>)
-	time_t *<[clock]>;
-	char *<[buf]>;
-
-DESCRIPTION
-Convert the time value at <[clock]> to local time (like <<localtime>>)
-and format it into a string of the form
-. Wed Jun 15 11:38:07 1988\n\0
-(like <<asctime>>).
-
-RETURNS
-A pointer to the string containing a formatted timestamp.
-
-PORTABILITY
-ANSI C requires <<ctime>>.
-
-<<ctime>> requires no supporting OS subroutines.
-*/
-
-#include <time.h>
-
-#ifndef _REENT_ONLY
-
-char *
-_DEFUN (ctime, (tim_p),
-	_CONST time_t * tim_p)
-{
-  return asctime (localtime (tim_p));
-}
-
-#endif
diff --git a/newlib/libc/time/ctime_r.c b/newlib/libc/time/ctime_r.c
deleted file mode 100644
index fda8cac1e..000000000
--- a/newlib/libc/time/ctime_r.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * ctime_r.c
- */
-
-#include <time.h>
-
-char *
-_DEFUN (ctime_r, (tim_p, result),
-	_CONST time_t * tim_p _AND
-        char * result)
-
-{
-  struct tm tm;
-  return asctime_r (localtime_r (tim_p, &tm), result);
-}
diff --git a/newlib/libc/time/difftime.c b/newlib/libc/time/difftime.c
deleted file mode 100644
index de6ffdb5c..000000000
--- a/newlib/libc/time/difftime.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * difftime.c
- * Original Author:	G. Haley
- */
-
-/*
-FUNCTION
-<<difftime>>---subtract two times
-
-INDEX
-	difftime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	double difftime(time_t <[tim1]>, time_t <[tim2]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	double difftime(<[tim1]>, <[tim2]>)
-	time_t <[tim1]>;
-	time_t <[tim2]>;
-
-DESCRIPTION
-Subtracts the two times in the arguments: `<<<[tim1]> - <[tim2]>>>'.
-
-RETURNS
-The difference (in seconds) between <[tim2]> and <[tim1]>, as a <<double>>.
-
-PORTABILITY
-ANSI C requires <<difftime>>, and defines its result to be in seconds
-in all implementations.
-
-<<difftime>> requires no supporting OS subroutines.
-*/
-
-#include <time.h>
-
-double
-_DEFUN (difftime, (tim1, tim2),
-	time_t tim1 _AND
-	time_t tim2)
-{
-  return (double)(tim1 - tim2);
-}
diff --git a/newlib/libc/time/gmtime.c b/newlib/libc/time/gmtime.c
deleted file mode 100644
index d8e687559..000000000
--- a/newlib/libc/time/gmtime.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * gmtime.c
- * Original Author:	G. Haley
- *
- * Converts the calendar time pointed to by tim_p into a broken-down time
- * expressed as Greenwich Mean Time (GMT). Returns a pointer to a structure
- * containing the broken-down time, or a null pointer if GMT is not
- * available.
- */
-
-/*
-FUNCTION
-<<gmtime>>---convert time to UTC traditional form
-
-INDEX
-	gmtime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	struct tm *gmtime(const time_t *<[clock]>);
-	struct tm *gmtime_r(const time_t *<[clock]>, struct tm *<[res]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	struct tm *gmtime(<[clock]>)
-	const time_t *<[clock]>;
-	struct tm *gmtime_r(<[clock]>, <[res]>)
-	const time_t *<[clock]>;
-	struct tm *<[res]>;
-
-DESCRIPTION
-<<gmtime>> assumes the time at <[clock]> represents a local time.
-<<gmtime>> converts it to UTC (Universal Coordinated Time, also known in some
-countries as GMT, Greenwich Mean time), then converts the
-representation from the arithmetic representation to
-the traditional representation defined by <<struct tm>>.
-
-<<gmtime>> constructs the traditional time representation in static
-storage; each call to <<gmtime>> or <<localtime>> will overwrite the
-information generated by previous calls to either function.
-
-RETURNS
-A pointer to the traditional time representation (<<struct tm>>).
-
-PORTABILITY
-ANSI C requires <<gmtime>>.
-
-<<gmtime>> requires no supporting OS subroutines.
-*/
-
-#include <stdlib.h>
-#include <time.h>
-
-#define _GMT_OFFSET 0
-
-#ifndef _REENT_ONLY
-
-struct tm *
-_DEFUN (gmtime, (tim_p),
-	_CONST time_t * tim_p)
-{
-  _REENT_CHECK_TM(_REENT);
-  return gmtime_r (tim_p, (struct tm *)_REENT_TM(_REENT));
-}
-
-#endif
diff --git a/newlib/libc/time/gmtime_r.c b/newlib/libc/time/gmtime_r.c
deleted file mode 100644
index fb39238d3..000000000
--- a/newlib/libc/time/gmtime_r.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * gmtime_r.c
- */
-
-#include <time.h>
-#include "local.h"
-
-struct tm *
-_DEFUN (gmtime_r, (tim_p, res),
-	_CONST time_t * tim_p _AND
-	struct tm *res)
-{
-  return (_mktm_r (tim_p, res, 1));
-}
diff --git a/newlib/libc/time/lcltime.c b/newlib/libc/time/lcltime.c
deleted file mode 100644
index 1cdc64fd0..000000000
--- a/newlib/libc/time/lcltime.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * localtime.c
- */
-
-/*
-FUNCTION
-<<localtime>>---convert time to local representation
-
-INDEX
-	localtime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	struct tm *localtime(time_t *<[clock]>);
-	struct tm *localtime_r(time_t *<[clock]>, struct tm *<[res]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	struct tm *localtime(<[clock]>)
-	time_t *<[clock]>;
-	struct tm *localtime(<[clock]>, <[res]>)
-	time_t *<[clock]>;
-	struct tm *<[res]>;
-
-DESCRIPTION
-<<localtime>> converts the time at <[clock]> into local time, then
-converts its representation from the arithmetic representation to the
-traditional representation defined by <<struct tm>>.
-
-<<localtime>> constructs the traditional time representation in static
-storage; each call to <<gmtime>> or <<localtime>> will overwrite the
-information generated by previous calls to either function.
-
-<<mktime>> is the inverse of <<localtime>>.
-
-RETURNS
-A pointer to the traditional time representation (<<struct tm>>).
-
-PORTABILITY
-ANSI C requires <<localtime>>.
-
-<<localtime>> requires no supporting OS subroutines.
-*/
-
-#include <time.h>
-#include <reent.h>
-
-#ifndef _REENT_ONLY
-
-struct tm *
-_DEFUN (localtime, (tim_p),
-	_CONST time_t * tim_p)
-{
-  _REENT_CHECK_TM(_REENT);
-  return localtime_r (tim_p, (struct tm *)_REENT_TM(_REENT));
-}
-
-#endif
diff --git a/newlib/libc/time/lcltime_r.c b/newlib/libc/time/lcltime_r.c
deleted file mode 100644
index cf386719c..000000000
--- a/newlib/libc/time/lcltime_r.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * localtime_r.c
- *
- * Converts the calendar time pointed to by tim_p into a broken-down time
- * expressed as local time. Returns a pointer to a structure containing the
- * broken-down time.
- */
-
-#include <time.h>
-#include "local.h"
-
-struct tm *
-_DEFUN (localtime_r, (tim_p, res),
-	_CONST time_t * tim_p _AND
-	struct tm *res)
-{
-  return _mktm_r (tim_p, res, 0);
-}
diff --git a/newlib/libc/time/local.h b/newlib/libc/time/local.h
deleted file mode 100644
index 722808715..000000000
--- a/newlib/libc/time/local.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* local header used by libc/time routines */
-#include <_ansi.h>
-#include <time.h>
-
-#define SECSPERMIN	60L
-#define MINSPERHOUR	60L
-#define HOURSPERDAY	24L
-#define SECSPERHOUR	(SECSPERMIN * MINSPERHOUR)
-#define SECSPERDAY	(SECSPERHOUR * HOURSPERDAY)
-#define DAYSPERWEEK	7
-#define MONSPERYEAR	12
-
-#define YEAR_BASE	1900
-#define EPOCH_YEAR      1970
-#define EPOCH_WDAY      4
-#define EPOCH_YEARS_SINCE_LEAP 2
-#define EPOCH_YEARS_SINCE_CENTURY 70
-#define EPOCH_YEARS_SINCE_LEAP_CENTURY 370
-
-#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0)
-
-extern time_t __tzstart_std;
-extern time_t __tzstart_dst;
-extern int __tznorth;
-extern int __tzyear;
-
-typedef struct __tzrule_struct
-{
-  char ch;
-  int m;
-  int n;
-  int d;
-  int s;
-  time_t change;
-  int offset;
-} __tzrule_type;
-
-extern __tzrule_type __tzrule[2];
-
-struct tm * _EXFUN (_mktm_r, (_CONST time_t *, struct tm *, int __is_gmtime));
-int         _EXFUN (__tzcalc_limits, (int __year));
-
-/* locks for multi-threading */
-#ifdef __SINGLE_THREAD__
-#define TZ_LOCK
-#define TZ_UNLOCK
-#else
-#define TZ_LOCK __tz_lock()
-#define TZ_UNLOCK __tz_unlock()
-#endif
-
-void _EXFUN(__tz_lock,(_VOID));
-void _EXFUN(__tz_unlock,(_VOID));
-
diff --git a/newlib/libc/time/mktime.c b/newlib/libc/time/mktime.c
deleted file mode 100644
index f6f080d84..000000000
--- a/newlib/libc/time/mktime.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * mktime.c
- * Original Author:	G. Haley
- *
- * Converts the broken-down time, expressed as local time, in the structure
- * pointed to by tim_p into a calendar time value. The original values of the
- * tm_wday and tm_yday fields of the structure are ignored, and the original
- * values of the other fields have no restrictions. On successful completion
- * the fields of the structure are set to represent the specified calendar
- * time. Returns the specified calendar time. If the calendar time can not be
- * represented, returns the value (time_t) -1.
- */
-
-/*
-FUNCTION
-<<mktime>>---convert time to arithmetic representation
-
-INDEX
-	mktime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	time_t mktime(struct tm *<[timp]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	time_t mktime(<[timp]>)
-	struct tm *<[timp]>;
-
-DESCRIPTION
-<<mktime>> assumes the time at <[timp]> is a local time, and converts
-its representation from the traditional representation defined by
-<<struct tm>> into a representation suitable for arithmetic.
-
-<<localtime>> is the inverse of <<mktime>>.
-
-RETURNS
-If the contents of the structure at <[timp]> do not form a valid
-calendar time representation, the result is <<-1>>.  Otherwise, the
-result is the time, converted to a <<time_t>> value.
-
-PORTABILITY
-ANSI C requires <<mktime>>.
-
-<<mktime>> requires no supporting OS subroutines.
-*/
-
-#include <stdlib.h>
-#include <time.h>
-#include "local.h"
-
-#define _SEC_IN_MINUTE 60L
-#define _SEC_IN_HOUR 3600L
-#define _SEC_IN_DAY 86400L
-
-static _CONST int DAYS_IN_MONTH[12] =
-{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-#define _DAYS_IN_MONTH(x) ((x == 1) ? days_in_feb : DAYS_IN_MONTH[x])
-
-static _CONST int _DAYS_BEFORE_MONTH[12] =
-{0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
-
-#define _ISLEAP(y) (((y) % 4) == 0 && (((y) % 100) != 0 || (((y)+1900) % 400) == 0))
-#define _DAYS_IN_YEAR(year) (_ISLEAP(year) ? 366 : 365)
-
-static void 
-validate_structure (tim_p)
-     struct tm *tim_p;
-{
-  div_t res;
-  int days_in_feb = 28;
-
-  /* calculate time & date to account for out of range values */
-  if (tim_p->tm_sec < 0 || tim_p->tm_sec > 59)
-    {
-      res = div (tim_p->tm_sec, 60);
-      tim_p->tm_min += res.quot;
-      if ((tim_p->tm_sec = res.rem) < 0)
-	{
-	  tim_p->tm_sec += 60;
-	  --tim_p->tm_min;
-	}
-    }
-
-  if (tim_p->tm_min < 0 || tim_p->tm_min > 59)
-    {
-      res = div (tim_p->tm_min, 60);
-      tim_p->tm_hour += res.quot;
-      if ((tim_p->tm_min = res.rem) < 0)
-	{
-	  tim_p->tm_min += 60;
-	  --tim_p->tm_hour;
-        }
-    }
-
-  if (tim_p->tm_hour < 0 || tim_p->tm_hour > 23)
-    {
-      res = div (tim_p->tm_hour, 24);
-      tim_p->tm_mday += res.quot;
-      if ((tim_p->tm_hour = res.rem) < 0)
-	{
-	  tim_p->tm_hour += 24;
-	  --tim_p->tm_mday;
-        }
-    }
-
-  if (tim_p->tm_mon > 11)
-    {
-      res = div (tim_p->tm_mon, 12);
-      tim_p->tm_year += res.quot;
-      if ((tim_p->tm_mon = res.rem) < 0)
-        {
-	  tim_p->tm_mon += 12;
-	  --tim_p->tm_year;
-        }
-    }
-
-  if (_DAYS_IN_YEAR (tim_p->tm_year) == 366)
-    days_in_feb = 29;
-
-  if (tim_p->tm_mday <= 0)
-    {
-      while (tim_p->tm_mday <= 0)
-	{
-	  if (--tim_p->tm_mon == -1)
-	    {
-	      tim_p->tm_year--;
-	      tim_p->tm_mon = 11;
-	      days_in_feb =
-		((_DAYS_IN_YEAR (tim_p->tm_year) == 366) ?
-		 29 : 28);
-	    }
-	  tim_p->tm_mday += _DAYS_IN_MONTH (tim_p->tm_mon);
-	}
-    }
-  else
-    {
-      while (tim_p->tm_mday > _DAYS_IN_MONTH (tim_p->tm_mon))
-	{
-	  tim_p->tm_mday -= _DAYS_IN_MONTH (tim_p->tm_mon);
-	  if (++tim_p->tm_mon == 12)
-	    {
-	      tim_p->tm_year++;
-	      tim_p->tm_mon = 0;
-	      days_in_feb =
-		((_DAYS_IN_YEAR (tim_p->tm_year) == 366) ?
-		 29 : 28);
-	    }
-	}
-    }
-}
-
-time_t 
-mktime (tim_p)
-     struct tm *tim_p;
-{
-  time_t tim = 0;
-  long days = 0;
-  int year, isdst;
-
-  /* validate structure */
-  validate_structure (tim_p);
-
-  /* compute hours, minutes, seconds */
-  tim += tim_p->tm_sec + (tim_p->tm_min * _SEC_IN_MINUTE) +
-    (tim_p->tm_hour * _SEC_IN_HOUR);
-
-  /* compute days in year */
-  days += tim_p->tm_mday - 1;
-  days += _DAYS_BEFORE_MONTH[tim_p->tm_mon];
-  if (tim_p->tm_mon > 1 && _DAYS_IN_YEAR (tim_p->tm_year) == 366)
-    days++;
-
-  /* compute day of the year */
-  tim_p->tm_yday = days;
-
-  if (tim_p->tm_year > 10000
-      || tim_p->tm_year < -10000)
-    {
-      return (time_t) -1;
-    }
-
-  /* compute days in other years */
-  if (tim_p->tm_year > 70)
-    {
-      for (year = 70; year < tim_p->tm_year; year++)
-	days += _DAYS_IN_YEAR (year);
-    }
-  else if (tim_p->tm_year < 70)
-    {
-      for (year = 69; year > tim_p->tm_year; year--)
-	days -= _DAYS_IN_YEAR (year);
-      days -= _DAYS_IN_YEAR (year);
-    }
-
-  /* compute day of the week */
-  if ((tim_p->tm_wday = (days + 4) % 7) < 0)
-    tim_p->tm_wday += 7;
-
-  /* compute total seconds */
-  tim += (days * _SEC_IN_DAY);
-
-  isdst = tim_p->tm_isdst;
-
-  if (_daylight)
-    {
-      int y = tim_p->tm_year + YEAR_BASE;
-      if (y == __tzyear || __tzcalc_limits (y))
-	{
-	  /* calculate start of dst in dst local time and 
-	     start of std in both std local time and dst local time */
-          time_t startdst_dst = __tzrule[0].change - __tzrule[1].offset;
-	  time_t startstd_dst = __tzrule[1].change - __tzrule[1].offset;
-	  time_t startstd_std = __tzrule[1].change - __tzrule[0].offset;
-	  /* if the time is in the overlap between dst and std local times */
-	  if (tim >= startstd_std && tim < startstd_dst)
-	    ; /* we let user decide or leave as -1 */
-          else
-	    {
-	      isdst = (__tznorth
-		       ? (tim >= startdst_dst && tim < startstd_std)
-		       : (tim >= startdst_dst || tim < startstd_std));
-	      /* if user committed and was wrong, perform correction */
-	      if ((isdst ^ tim_p->tm_isdst) == 1)
-		{
-		  /* we either subtract or add the difference between
-		     time zone offsets, depending on which way the user got it wrong */
-		  int diff = __tzrule[0].offset - __tzrule[1].offset;
-		  if (!isdst)
-		    diff = -diff;
-		  tim_p->tm_sec += diff;
-		  validate_structure (tim_p);
-		  tim += diff;  /* we also need to correct our current time calculation */
-		}
-	    }
-	}
-    }
-
-  /* add appropriate offset to put time in gmt format */
-  if (isdst == 1)
-    tim += __tzrule[1].offset;
-  else /* otherwise assume std time */
-    tim += __tzrule[0].offset;
-
-  /* reset isdst flag to what we have calculated */
-  tim_p->tm_isdst = isdst;
-
-  return tim;
-}
diff --git a/newlib/libc/time/mktm_r.c b/newlib/libc/time/mktm_r.c
deleted file mode 100644
index 4fdfb9b7b..000000000
--- a/newlib/libc/time/mktm_r.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * mktm_r.c
- * Original Author:	Adapted from tzcode maintained by Arthur David Olson.
- * Modifications:       Changed to mktm_r and added __tzcalc_limits - 04/10/02, Jeff Johnston
- *
- * Converts the calendar time pointed to by tim_p into a broken-down time
- * expressed as local time. Returns a pointer to a structure containing the
- * broken-down time.
- */
-
-#include <stdlib.h>
-#include <time.h>
-#include "local.h"
-
-static _CONST int mon_lengths[2][MONSPERYEAR] = {
-  {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31},
-  {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}
-} ;
-
-static _CONST int year_lengths[2] = {
-  365,
-  366
-} ;
-
-struct tm *
-_DEFUN (_mktm_r, (tim_p, res, is_gmtime),
-	_CONST time_t * tim_p _AND
-	struct tm *res _AND
-	int is_gmtime)
-{
-  long days, rem;
-  time_t lcltime;
-  int i;
-  int y;
-  int yleap;
-  _CONST int *ip;
-
-  /* base decision about std/dst time on current time */
-  lcltime = *tim_p;
-   
-  days = ((long)lcltime) / SECSPERDAY;
-  rem = ((long)lcltime) % SECSPERDAY;
-  while (rem < 0) 
-    {
-      rem += SECSPERDAY;
-      --days;
-    }
-  while (rem >= SECSPERDAY)
-    {
-      rem -= SECSPERDAY;
-      ++days;
-    }
- 
-  /* compute hour, min, and sec */  
-  res->tm_hour = (int) (rem / SECSPERHOUR);
-  rem %= SECSPERHOUR;
-  res->tm_min = (int) (rem / SECSPERMIN);
-  res->tm_sec = (int) (rem % SECSPERMIN);
-
-  /* compute day of week */
-  if ((res->tm_wday = ((EPOCH_WDAY + days) % DAYSPERWEEK)) < 0)
-    res->tm_wday += DAYSPERWEEK;
-
-  /* compute year & day of year */
-  y = EPOCH_YEAR;
-  if (days >= 0)
-    {
-      for (;;)
-	{
-	  yleap = isleap(y);
-	  if (days < year_lengths[yleap])
-	    break;
-	  y++;
-	  days -= year_lengths[yleap];
-	}
-    }
-  else
-    {
-      do
-	{
-	  --y;
-	  yleap = isleap(y);
-	  days += year_lengths[yleap];
-	} while (days < 0);
-    }
-
-  res->tm_year = y - YEAR_BASE;
-  res->tm_yday = days;
-  ip = mon_lengths[yleap];
-  for (res->tm_mon = 0; days >= ip[res->tm_mon]; ++res->tm_mon)
-    days -= ip[res->tm_mon];
-  res->tm_mday = days + 1;
-
-  if (!is_gmtime)
-    {
-      int offset;
-      int hours, mins, secs;
-
-      TZ_LOCK;
-      if (_daylight)
-	{
-	  if (y == __tzyear || __tzcalc_limits (y))
-	    res->tm_isdst = (__tznorth 
-			     ? (*tim_p >= __tzrule[0].change && *tim_p < __tzrule[1].change)
-			     : (*tim_p >= __tzrule[0].change || *tim_p < __tzrule[1].change));
-	  else
-	    res->tm_isdst = -1;
-	}
-      else
-	res->tm_isdst = 0;
-
-      offset = (res->tm_isdst == 1 ? __tzrule[1].offset : __tzrule[0].offset);
-
-      hours = offset / SECSPERHOUR;
-      offset = offset % SECSPERHOUR;
-      
-      mins = offset / SECSPERMIN;
-      secs = offset % SECSPERMIN;
-
-      res->tm_sec -= secs;
-      res->tm_min -= mins;
-      res->tm_hour -= hours;
-
-      if (res->tm_sec >= SECSPERMIN)
-	{
-	  res->tm_min += 1;
-	  res->tm_sec -= SECSPERMIN;
-	}
-      else if (res->tm_sec < 0)
-	{
-	  res->tm_min -= 1;
-	  res->tm_sec += SECSPERMIN;
-	}
-      if (res->tm_min >= MINSPERHOUR)
-	{
-	  res->tm_hour += 1;
-	  res->tm_min -= MINSPERHOUR;
-	}
-      else if (res->tm_min < 0)
-	{
-	  res->tm_hour -= 1;
-	  res->tm_min += MINSPERHOUR;
-	}
-      if (res->tm_hour >= HOURSPERDAY)
-	{
-	  ++res->tm_yday;
-	  ++res->tm_wday;
-	  if (res->tm_wday > 6)
-	    res->tm_wday = 0;
-	  ++res->tm_mday;
-	  res->tm_hour -= HOURSPERDAY;
-	  if (res->tm_mday >= ip[res->tm_mon])
-	    {
-	      res->tm_mday -= ip[res->tm_mon] - 1;
-	      res->tm_mon += 1;
-	      if (res->tm_mon == 12)
-		{
-		  res->tm_mon = 0;
-		  res->tm_year += 1;
-		  res->tm_yday = 0;
-		}
-	    }
-	}
-       else if (res->tm_hour < 0)
-	{
-	  res->tm_yday -= 1;
-	  res->tm_wday -= 1;
-	  if (res->tm_wday < 0)
-	    res->tm_wday = 6;
-	  res->tm_mday -= 1;
-	  res->tm_hour += 24;
-	  if (res->tm_mday == 0)
-	    {
-	      res->tm_mon -= 1;
-	      if (res->tm_mon < 0)
-		{
-		  res->tm_mon = 11;
-		  res->tm_year -= 1;
-		  res->tm_yday = 365 + isleap(res->tm_year);
-		}
-	      res->tm_mday = ip[res->tm_mon];
-	    }
-	}
-      TZ_UNLOCK;
-    }
-  else
-    res->tm_isdst = 0;
-
-  return (res);
-}
-
-int
-_DEFUN (__tzcalc_limits, (year),
-	int year)
-{
-  int days, year_days, years;
-  int i, j;
-
-  if (year < EPOCH_YEAR)
-    return 0;
-
-  __tzyear = year;
-
-  years = (year - EPOCH_YEAR);
-
-  year_days = years * 365 +
-    (years - 1 + EPOCH_YEARS_SINCE_LEAP) / 4 - (years - 1 + EPOCH_YEARS_SINCE_CENTURY) / 100 + 
-    (years - 1 + EPOCH_YEARS_SINCE_LEAP_CENTURY) / 400;
-  
-  for (i = 0; i < 2; ++i)
-    {
-      if (__tzrule[i].ch == 'J')
-	days = year_days + __tzrule[i].d + (isleap(year) && __tzrule[i].d >= 60);
-      else if (__tzrule[i].ch == 'D')
-	days = year_days + __tzrule[i].d;
-      else
-	{
-	  int yleap = isleap(year);
-	  int m_day, m_wday, wday_diff;
-	  _CONST int *ip = mon_lengths[yleap];
-
-	  days = year_days;
-
-	  for (j = 1; j < __tzrule[i].m; ++j)
-	    days += ip[j-1];
-
-	  m_wday = (EPOCH_WDAY + days) % DAYSPERWEEK;
-	  
-	  wday_diff = __tzrule[i].d - m_wday;
-	  if (wday_diff < 0)
-	    wday_diff += DAYSPERWEEK;
-	  m_day = (__tzrule[i].n - 1) * DAYSPERWEEK + wday_diff;
-
-	  while (m_day >= ip[j])
-	    m_day -= DAYSPERWEEK;
-
-	  days += m_day;
-	}
-
-      /* store the change-over time in GMT form by adding offset */
-      __tzrule[i].change = days * SECSPERDAY + __tzrule[i].s + __tzrule[i].offset;
-    }
-
-  __tznorth = (__tzrule[0].change < __tzrule[1].change);
-
-  return 1;
-}
-
diff --git a/newlib/libc/time/strftime.c b/newlib/libc/time/strftime.c
deleted file mode 100644
index 9084d9ffb..000000000
--- a/newlib/libc/time/strftime.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * strftime.c
- * Original Author:	G. Haley
- *
- * Places characters into the array pointed to by s as controlled by the string
- * pointed to by format. If the total number of resulting characters including
- * the terminating null character is not more than maxsize, returns the number
- * of characters placed into the array pointed to by s (not including the
- * terminating null character); otherwise zero is returned and the contents of
- * the array indeterminate.
- */
-
-/*
-FUNCTION
-<<strftime>>---flexible calendar time formatter
-
-INDEX
-	strftime
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	size_t strftime(char *<[s]>, size_t <[maxsize]>,
-			const char *<[format]>, const struct tm *<[timp]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	size_t strftime(<[s]>, <[maxsize]>, <[format]>, <[timp]>)
-	char *<[s]>;
-	size_t <[maxsize]>;
-	char *<[format]>;
-	struct tm *<[timp]>;
-
-DESCRIPTION
-<<strftime>> converts a <<struct tm>> representation of the time (at
-<[timp]>) into a string, starting at <[s]> and occupying no more than
-<[maxsize]> characters.
-
-You control the format of the output using the string at <[format]>.
-<<*<[format]>>> can contain two kinds of specifications: text to be
-copied literally into the formatted string, and time conversion
-specifications.  Time conversion specifications are two-character
-sequences beginning with `<<%>>' (use `<<%%>>' to include a percent
-sign in the output).  Each defined conversion specification selects a
-field of calendar time data from <<*<[timp]>>>, and converts it to a
-string in one of the following ways:
-
-o+
-o %a
-An abbreviation for the day of the week.
-
-o %A
-The full name for the day of the week.
-
-o %b
-An abbreviation for the month name.
-
-o %B
-The full name of the month.
-
-o %c
-A string representing the complete date and time, in the form
-. Mon Apr 01 13:13:13 1992
-
-o %d
-The day of the month, formatted with two digits.
-
-o %e
-The day of the month, formatted with leading space if single digit.
-
-o %H
-The hour (on a 24-hour clock), formatted with two digits.
-
-o %I
-The hour (on a 12-hour clock), formatted with two digits.
-
-o %j
-The count of days in the year, formatted with three digits
-(from `<<001>>' to `<<366>>').
-
-o %m
-The month number, formatted with two digits.
-
-o %M
-The minute, formatted with two digits.
-
-o %p
-Either `<<AM>>' or `<<PM>>' as appropriate.
-
-o %S
-The second, formatted with two digits.
-
-o %U
-The week number, formatted with two digits (from `<<00>>' to `<<53>>';
-week number 1 is taken as beginning with the first Sunday in a year).
-See also <<%W>>.
-
-o %w
-A single digit representing the day of the week: Sunday is day <<0>>.
-
-o %W
-Another version of the week number: like `<<%U>>', but counting week 1
-as beginning with the first Monday in a year.
-
-o
-o %x
-A string representing the complete date, in a format like
-. Mon Apr 01 1992
-
-o %X
-A string representing the full time of day (hours, minutes, and
-seconds), in a format like
-. 13:13:13
-
-o %y
-The last two digits of the year.
-
-o %Y
-The full year, formatted with four digits to include the century.
-
-o %Z
-The time zone name.  If tm_isdst is -1, no output is generated.
-Otherwise, the time zone name based on the TZ environment variable
-is used.
-
-o %%
-A single character, `<<%>>'.
-o-
-
-RETURNS
-When the formatted time takes up no more than <[maxsize]> characters,
-the result is the length of the formatted string.  Otherwise, if the
-formatting operation was abandoned due to lack of room, the result is
-<<0>>, and the string starting at <[s]> corresponds to just those
-parts of <<*<[format]>>> that could be completely filled in within the
-<[maxsize]> limit.
-
-PORTABILITY
-ANSI C requires <<strftime>>, but does not specify the contents of
-<<*<[s]>>> when the formatted string would require more than
-<[maxsize]> characters.
-
-<<strftime>> requires no supporting OS subroutines.
-*/
-
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include "local.h"
-
-static _CONST int dname_len[7] =
-{6, 6, 7, 9, 8, 6, 8};
-
-static _CONST char *_CONST dname[7] =
-{"Sunday", "Monday", "Tuesday", "Wednesday",
- "Thursday", "Friday", "Saturday"};
-
-static _CONST int mname_len[12] =
-{7, 8, 5, 5, 3, 4, 4, 6, 9, 7, 8, 8};
-
-static _CONST char *_CONST mname[12] =
-{"January", "February", "March", "April",
- "May", "June", "July", "August", "September", "October", "November",
- "December"};
-
-size_t
-_DEFUN (strftime, (s, maxsize, format, tim_p),
-	char *s _AND
-	size_t maxsize _AND
-	_CONST char *format _AND
-	_CONST struct tm *tim_p)
-{
-  size_t count = 0;
-  int i;
-
-  for (;;)
-    {
-      while (*format && *format != '%')
-	{
-	  if (count < maxsize - 1)
-	    s[count++] = *format++;
-	  else
-	    return 0;
-	}
-
-      if (*format == '\0')
-	break;
-
-      format++;
-      switch (*format)
-	{
-	case 'a':
-	  for (i = 0; i < 3; i++)
-	    {
-	      if (count < maxsize - 1)
-		s[count++] =
-		  dname[tim_p->tm_wday][i];
-	      else
-		return 0;
-	    }
-	  break;
-	case 'A':
-	  for (i = 0; i < dname_len[tim_p->tm_wday]; i++)
-	    {
-	      if (count < maxsize - 1)
-		s[count++] =
-		  dname[tim_p->tm_wday][i];
-	      else
-		return 0;
-	    }
-	  break;
-	case 'b':
-	case 'h':
-	  for (i = 0; i < 3; i++)
-	    {
-	      if (count < maxsize - 1)
-		s[count++] =
-		  mname[tim_p->tm_mon][i];
-	      else
-		return 0;
-	    }
-	  break;
-	case 'B':
-	  for (i = 0; i < mname_len[tim_p->tm_mon]; i++)
-	    {
-	      if (count < maxsize - 1)
-		s[count++] =
-		  mname[tim_p->tm_mon][i];
-	      else
-		return 0;
-	    }
-	  break;
-	case 'c':
-	  if (count < maxsize - 24)
-	    {
-	      for (i = 0; i < 3; i++)
-		s[count++] =
-		  dname[tim_p->tm_wday][i];
-	      s[count++] = ' ';
-	      for (i = 0; i < 3; i++)
-		s[count++] =
-		  mname[tim_p->tm_mon][i];
-
-	      sprintf (&s[count],
-		       " %.2d %2.2d:%2.2d:%2.2d %.4d",
-		       tim_p->tm_mday, tim_p->tm_hour,
-		       tim_p->tm_min,
-		       tim_p->tm_sec, 1900 +
-		       tim_p->tm_year);
-	      count += 17;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'd':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%.2d",
-		       tim_p->tm_mday);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'e':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%2d",
-		       tim_p->tm_mday);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'H':
-	case 'k':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], *format == 'k' ? "%2d" : "%2.2d",
-		       tim_p->tm_hour);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'I':
-	case 'l':
-	  if (count < maxsize - 2)
-	    {
-	      if (tim_p->tm_hour == 0 ||
-		  tim_p->tm_hour == 12)
-		{
-		  s[count++] = '1';
-		  s[count++] = '2';
-		}
-	      else
-		{
-		  sprintf (&s[count], (*format == 'I') ? "%.2d" : "%2d",
-			   tim_p->tm_hour % 12);
-		  count += 2;
-		}
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'j':
-	  if (count < maxsize - 3)
-	    {
-	      sprintf (&s[count], "%.3d",
-		       tim_p->tm_yday + 1);
-	      count += 3;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'm':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%.2d",
-		       tim_p->tm_mon + 1);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'M':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%2.2d",
-		       tim_p->tm_min);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'p':
-	  if (count < maxsize - 2)
-	    {
-	      if (tim_p->tm_hour < 12)
-		s[count++] = 'A';
-	      else
-		s[count++] = 'P';
-
-	      s[count++] = 'M';
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'S':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%2.2d",
-		       tim_p->tm_sec);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'U':
-	  if (count < maxsize - 2)
-	    {
-	      sprintf (&s[count], "%2.2d",
-		       (tim_p->tm_yday + 7 -
-			tim_p->tm_wday) / 7);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'w':
-	  if (count < maxsize - 1)
-	    {
-	      sprintf (&s[count], "%1.1d",
-		       tim_p->tm_wday);
-	      count++;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'W':
-	  if (count < maxsize - 2)
-	    {
-	      int wday = (tim_p->tm_wday) ? tim_p->tm_wday - 1 : 6;
-	      sprintf (&s[count], "%2.2d",
-		       (tim_p->tm_yday + 7 -
-			wday) / 7);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'x':
-	  if (count < maxsize - 15)
-	    {
-	      for (i = 0; i < 3; i++)
-		s[count++] =
-		  dname[tim_p->tm_wday][i];
-	      s[count++] = ' ';
-	      for (i = 0; i < 3; i++)
-		s[count++] =
-		  mname[tim_p->tm_mon][i];
-
-	      sprintf (&s[count],
-		       " %.2d %.4d", tim_p->tm_mday,
-		       1900 + tim_p->tm_year);
-	      count += 8;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'X':
-	  if (count < maxsize - 8)
-	    {
-	      sprintf (&s[count],
-		       "%2.2d:%2.2d:%2.2d",
-		       tim_p->tm_hour, tim_p->tm_min,
-		       tim_p->tm_sec);
-	      count += 8;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'y':
-	  if (count < maxsize - 2)
-	    {
-	      /* The year could be greater than 100, so we need the value
-		 modulo 100.  The year could be negative, so we need to
-		 correct for a possible negative remainder.  */
-	      sprintf (&s[count], "%2.2d",
-		       (tim_p->tm_year % 100 + 100) % 100);
-	      count += 2;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'Y':
-	  if (count < maxsize - 4)
-	    {
-	      sprintf (&s[count], "%.4d",
-		       1900 + tim_p->tm_year);
-	      count += 4;
-	    }
-	  else
-	    return 0;
-	  break;
-	case 'Z':
-	  if (tim_p->tm_isdst >= 0)
-	    {
-	      int size;
-	      TZ_LOCK;
-	      size = strlen(_tzname[tim_p->tm_isdst]);
-	      for (i = 0; i < size; i++)
-		{
-		  if (count < maxsize - 1)
-		    s[count++] = _tzname[tim_p->tm_isdst][i];
-		  else
-		    {
-		      TZ_UNLOCK;
-		      return 0;
-		    }
-		}
-	      TZ_UNLOCK;
-	    }
-	  break;
-	case '%':
-	  if (count < maxsize - 1)
-	    s[count++] = '%';
-	  else
-	    return 0;
-	  break;
-	}
-      if (*format)
-	format++;
-      else
-	break;
-    }
-  s[count] = '\0';
-
-  return count;
-}
diff --git a/newlib/libc/time/strptime.c b/newlib/libc/time/strptime.c
deleted file mode 100644
index 929ad9211..000000000
--- a/newlib/libc/time/strptime.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * Copyright (c) 1999 Kungliga Tekniska Högskolan
- * (Royal Institute of Technology, Stockholm, Sweden). 
- * All rights reserved. 
- *
- * Redistribution and use in source and binary forms, with or without 
- * modification, are permitted provided that the following conditions 
- * are met: 
- *
- * 1. Redistributions of source code must retain the above copyright 
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright 
- *    notice, this list of conditions and the following disclaimer in the 
- *    documentation and/or other materials provided with the distribution. 
- *
- * 3. Neither the name of KTH nor the names of its contributors may be
- *    used to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY KTH AND ITS CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL KTH OR ITS CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
-
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-
-static const char *abb_weekdays[] = {
-    "Sun",
-    "Mon",
-    "Tue",
-    "Wed",
-    "Thu",
-    "Fri",
-    "Sat",
-    NULL
-};
-
-static const char *full_weekdays[] = {
-    "Sunday",
-    "Monday",
-    "Tuesday",
-    "Wednesday",
-    "Thursday",
-    "Friday",
-    "Saturday",
-    NULL
-};
-
-static const char *abb_month[] = {
-    "Jan",
-    "Feb",
-    "Mar",
-    "Apr",
-    "May",
-    "Jun",
-    "Jul",
-    "Aug",
-    "Sep",
-    "Oct",
-    "Nov",
-    "Dec",
-    NULL
-};
-
-static const char *full_month[] = {
-    "January",
-    "February",
-    "Mars",
-    "April",
-    "May",
-    "June",
-    "July",
-    "August",
-    "September",
-    "October",
-    "November",
-    "December",
-    NULL,
-};
-
-static const char *ampm[] = {
-    "am",
-    "pm",
-    NULL
-};
-
-/*
- * tm_year is relative this year 
- */
-const int tm_year_base = 1900;
-
-/*
- * Return TRUE iff `year' was a leap year.
- * Needed for strptime.
- */
-static int
-is_leap_year (int year)
-{
-    return (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0);
-}
-
-/* Needed for strptime. */
-static int
-match_string (const char **buf, const char **strs)
-{
-    int i = 0;
-
-    for (i = 0; strs[i] != NULL; ++i) {
-	int len = strlen (strs[i]);
-
-	if (strncasecmp (*buf, strs[i], len) == 0) {
-	    *buf += len;
-	    return i;
-	}
-    }
-    return -1;
-}
-
-/* Needed for strptime. */
-static int
-first_day (int year)
-{
-    int ret = 4;
-
-    for (; year > 1970; --year)
-	ret = (ret + 365 + is_leap_year (year) ? 1 : 0) % 7;
-    return ret;
-}
-
-/*
- * Set `timeptr' given `wnum' (week number [0, 53])
- * Needed for strptime
- */
-
-static void
-set_week_number_sun (struct tm *timeptr, int wnum)
-{
-    int fday = first_day (timeptr->tm_year + tm_year_base);
-
-    timeptr->tm_yday = wnum * 7 + timeptr->tm_wday - fday;
-    if (timeptr->tm_yday < 0) {
-	timeptr->tm_wday = fday;
-	timeptr->tm_yday = 0;
-    }
-}
-
-/*
- * Set `timeptr' given `wnum' (week number [0, 53])
- * Needed for strptime
- */
-
-static void
-set_week_number_mon (struct tm *timeptr, int wnum)
-{
-    int fday = (first_day (timeptr->tm_year + tm_year_base) + 6) % 7;
-
-    timeptr->tm_yday = wnum * 7 + (timeptr->tm_wday + 6) % 7 - fday;
-    if (timeptr->tm_yday < 0) {
-	timeptr->tm_wday = (fday + 1) % 7;
-	timeptr->tm_yday = 0;
-    }
-}
-
-/*
- * Set `timeptr' given `wnum' (week number [0, 53])
- * Needed for strptime
- */
-static void
-set_week_number_mon4 (struct tm *timeptr, int wnum)
-{
-    int fday = (first_day (timeptr->tm_year + tm_year_base) + 6) % 7;
-    int offset = 0;
-
-    if (fday < 4)
-	offset += 7;
-
-    timeptr->tm_yday = offset + (wnum - 1) * 7 + timeptr->tm_wday - fday;
-    if (timeptr->tm_yday < 0) {
-	timeptr->tm_wday = fday;
-	timeptr->tm_yday = 0;
-    }
-}
-
-/* strptime: roken */
-//extern "C"
-char *
-//strptime (const char *buf, const char *format, struct tm *timeptr)
-_DEFUN (strptime, (buf, format, timeptr),
-	_CONST char *buf _AND
-	_CONST char *format _AND
-	struct tm *timeptr)
-{
-    char c;
-
-    for (; (c = *format) != '\0'; ++format) {
-	char *s;
-	int ret;
-
-	if (isspace (c)) {
-	    while (isspace (*buf))
-		++buf;
-	} else if (c == '%' && format[1] != '\0') {
-	    c = *++format;
-	    if (c == 'E' || c == 'O')
-		c = *++format;
-	    switch (c) {
-	    case 'A' :
-		ret = match_string (&buf, full_weekdays);
-		if (ret < 0)
-		    return NULL;
-		timeptr->tm_wday = ret;
-		break;
-	    case 'a' :
-		ret = match_string (&buf, abb_weekdays);
-		if (ret < 0)
-		    return NULL;
-		timeptr->tm_wday = ret;
-		break;
-	    case 'B' :
-		ret = match_string (&buf, full_month);
-		if (ret < 0)
-		    return NULL;
-		timeptr->tm_mon = ret;
-		break;
-	    case 'b' :
-	    case 'h' :
-		ret = match_string (&buf, abb_month);
-		if (ret < 0)
-		    return NULL;
-		timeptr->tm_mon = ret;
-		break;
-	    case 'C' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_year = (ret * 100) - tm_year_base;
-		buf = s;
-		break;
-	    case 'c' :
-		abort ();
-	    case 'D' :		/* %m/%d/%y */
-		s = strptime (buf, "%m/%d/%y", timeptr);
-		if (s == NULL)
-		    return NULL;
-		buf = s;
-		break;
-	    case 'd' :
-	    case 'e' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_mday = ret;
-		buf = s;
-		break;
-	    case 'H' :
-	    case 'k' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_hour = ret;
-		buf = s;
-		break;
-	    case 'I' :
-	    case 'l' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		if (ret == 12)
-		    timeptr->tm_hour = 0;
-		else
-		    timeptr->tm_hour = ret;
-		buf = s;
-		break;
-	    case 'j' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_yday = ret - 1;
-		buf = s;
-		break;
-	    case 'm' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_mon = ret - 1;
-		buf = s;
-		break;
-	    case 'M' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_min = ret;
-		buf = s;
-		break;
-	    case 'n' :
-		if (*buf == '\n')
-		    ++buf;
-		else
-		    return NULL;
-		break;
-	    case 'p' :
-		ret = match_string (&buf, ampm);
-		if (ret < 0)
-		    return NULL;
-		if (timeptr->tm_hour == 0) {
-		    if (ret == 1)
-			timeptr->tm_hour = 12;
-		} else
-		    timeptr->tm_hour += 12;
-		break;
-	    case 'r' :		/* %I:%M:%S %p */
-		s = strptime (buf, "%I:%M:%S %p", timeptr);
-		if (s == NULL)
-		    return NULL;
-		buf = s;
-		break;
-	    case 'R' :		/* %H:%M */
-		s = strptime (buf, "%H:%M", timeptr);
-		if (s == NULL)
-		    return NULL;
-		buf = s;
-		break;
-	    case 'S' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_sec = ret;
-		buf = s;
-		break;
-	    case 't' :
-		if (*buf == '\t')
-		    ++buf;
-		else
-		    return NULL;
-		break;
-	    case 'T' :		/* %H:%M:%S */
-	    case 'X' :
-		s = strptime (buf, "%H:%M:%S", timeptr);
-		if (s == NULL)
-		    return NULL;
-		buf = s;
-		break;
-	    case 'u' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_wday = ret - 1;
-		buf = s;
-		break;
-	    case 'w' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_wday = ret;
-		buf = s;
-		break;
-	    case 'U' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		set_week_number_sun (timeptr, ret);
-		buf = s;
-		break;
-	    case 'V' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		set_week_number_mon4 (timeptr, ret);
-		buf = s;
-		break;
-	    case 'W' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		set_week_number_mon (timeptr, ret);
-		buf = s;
-		break;
-	    case 'x' :
-		s = strptime (buf, "%Y:%m:%d", timeptr);
-		if (s == NULL)
-		    return NULL;
-		buf = s;
-		break;
-	    case 'y' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		if (ret < 70)
-		    timeptr->tm_year = 100 + ret;
-		else
-		    timeptr->tm_year = ret;
-		buf = s;
-		break;
-	    case 'Y' :
-		ret = strtol (buf, &s, 10);
-		if (s == buf)
-		    return NULL;
-		timeptr->tm_year = ret - tm_year_base;
-		buf = s;
-		break;
-	    case 'Z' :
-		abort ();
-	    case '\0' :
-		--format;
-		/* FALLTHROUGH */
-	    case '%' :
-		if (*buf == '%')
-		    ++buf;
-		else
-		    return NULL;
-		break;
-	    default :
-		if (*buf == '%' || *++buf == c)
-		    ++buf;
-		else
-		    return NULL;
-		break;
-	    }
-	} else {
-	    if (*buf == c)
-		++buf;
-	    else
-		return NULL;
-	}
-    }
-    return (char *)buf;
-}
-
diff --git a/newlib/libc/time/time.c b/newlib/libc/time/time.c
deleted file mode 100644
index 38cce50f9..000000000
--- a/newlib/libc/time/time.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* FIXME: doc says "not avail" due to #if 0.
-   	  DELETE that line if inappropriate! */
-/*
-FUNCTION
-<<time>>---get current calendar time (as single number)
-
-INDEX
-	time
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	time_t time(time_t *<[t]>);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	time_t time(<[t]>)
-	time_t *<[t]>;
-
-DESCRIPTION
-<<time>> looks up the best available representation of the current
-time and returns it, encoded as a <<time_t>>.  It stores the same
-value at <[t]> unless the argument is <<NULL>>.
-
-RETURNS
-A <<-1>> result means the current time is not available; otherwise the
-result represents the current time.
-
-PORTABILITY
-ANSI C requires <<time>>.
-
-Supporting OS subroutine required: Some implementations require
-<<gettimeofday>>.
-*/
-
-#ifdef HAVE_GETTIMEOFDAY
-
-/* Most times we have a system call in newlib/libc/sys/.. to do this job */
-
-#include <_ansi.h>
-#include <reent.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-time_t
-_DEFUN (time, (t),
-	time_t * t)
-{
-  struct timeval now;
-
-  if (_gettimeofday_r (_REENT, &now, (struct timezone *) 0) >= 0)
-    {
-      if (t)
-	*t = now.tv_sec;
-      return now.tv_sec;
-    }
-  return -1;
-}
-
-#endif
diff --git a/newlib/libc/time/time.tex b/newlib/libc/time/time.tex
deleted file mode 100644
index ace08b036..000000000
--- a/newlib/libc/time/time.tex
+++ /dev/null
@@ -1,90 +0,0 @@
-@node Timefns
-@chapter Time Functions (@file{time.h})
-
-This chapter groups functions used either for reporting on time
-(elapsed, current, or compute time) or to perform calculations based
-on time.
-
-The header file @file{time.h} defines three types.  @code{clock_t} and
-@code{time_t} are both used for representations of time particularly
-suitable for arithmetic.  (In this implementation, quantities of type
-@code{clock_t} have the highest resolution possible on your machine,
-and quantities of type @code{time_t} resolve to seconds.)  @code{size_t}
-is also defined if necessary for quantities representing sizes. 
-
-@file{time.h} also defines the structure @code{tm} for the traditional
-representation of Gregorian calendar time as a series of numbers, with
-the following fields: 
-
-@table @code
-@item tm_sec
-Seconds.
-
-@item tm_min
-Minutes.
-
-@item tm_hour
-Hours.
-
-@item tm_mday
-Day.
-
-@item tm_mon
-Month.
-
-@item tm_year
-Year (since 1900).
-
-@item tm_wday
-Day of week: the number of days since Sunday.
-
-@item tm_yday
-Number of days elapsed since last January 1.
-
-@item tm_isdst
-Daylight Savings Time flag: positive means DST in effect, zero means DST
-not in effect, negative means no information about DST is available.
-@end table
-
-@menu
-* asctime::     Format time as string
-* clock::       Cumulative processor time
-* ctime::       Convert time to local and format as string
-* difftime::    Subtract two times
-* gmtime::      Convert time to UTC (GMT) traditional representation
-* localtime::   Convert time to local representation
-* mktime::      Convert time to arithmetic representation
-* strftime::    Flexible calendar time formatter
-* time::        Get current calendar time (as single number)
-* tzset::       Set timezone info
-@end menu
-
-@page
-@include time/asctime.def
-
-@page
-@include time/clock.def
-
-@page
-@include time/ctime.def
-
-@page
-@include time/difftime.def
-
-@page
-@include time/gmtime.def
-
-@page
-@include time/lcltime.def
-
-@page
-@include time/mktime.def
-
-@page
-@include time/strftime.def
-
-@page
-@include time/time.def
-
-@page
-@include time/tzset.def
diff --git a/newlib/libc/time/tzlock.c b/newlib/libc/time/tzlock.c
deleted file mode 100644
index 66fa1c366..000000000
--- a/newlib/libc/time/tzlock.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-FUNCTION
-<<__tz_lock>>, <<__tz_unlock>>--lock time zone global variables
-
-INDEX
-	__tz_lock
-INDEX
-	__tz_unlock
-
-ANSI_SYNOPSIS
-	#include "local.h"
-	void __tz_lock (void);
-	void __tz_unlock (void);
-
-TRAD_SYNOPSIS
-	void __tz_lock();
-	void __tz_unlock();
-
-DESCRIPTION
-The <<tzset>> facility functions call these functions when they need
-to ensure the values of global variables.  The version of these routines supplied
-in the library do not do anything.  If multiple threads of execution
-can call the time functions and give up scheduling in the middle, then you
-you need to define your own versions of these functions in order to
-safely lock the time zone variables during a call.  If you do not, the results
-of <<localtime>>, <<mktime>>, <<ctime>>, and <<strftime>> are undefined.
-
-The lock <<__tz_lock>> may not be called recursively; that is,
-a call <<__tz_lock>> will always lock all subsequent <<__tz_lock>> calls
-until the corresponding <<__tz_unlock>> call on the same thread is made.
-*/
-
-#include <_ansi.h>
-#include "local.h"
-
-_VOID
-_DEFUN_VOID (__tz_lock)
-{
-}
-
-_VOID
-_DEFUN_VOID (__tz_unlock)
-{
-}
diff --git a/newlib/libc/time/tzset.c b/newlib/libc/time/tzset.c
deleted file mode 100644
index c70e3ee6e..000000000
--- a/newlib/libc/time/tzset.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-FUNCTION
-<<tzset>>---set timezone characteristics from TZ environment variable
-
-INDEX
-	tzset
-
-ANSI_SYNOPSIS
-	#include <time.h>
-	void tzset(void);
-	void _tzset_r (struct _reent *);
-
-TRAD_SYNOPSIS
-	#include <time.h>
-	void tzset();
-	void _tzset_r (reent_ptr)
-        struct _reent *reent_ptr;
-
-DESCRIPTION
-<<tzset>> examines the TZ environment variable and sets up the three
-external variables: <<_timezone>>, <<_daylight>>, and <<tzname>>.  The
-value of <<_timezone>> shall be the offset from the current time zone
-to GMT.  The value of <<_daylight>> shall be 0 if there is no daylight
-savings time for the current time zone, otherwise it will be non-zero.
-The <<tzname>> array has two entries: the first is the name of the
-standard time zone, the second is the name of the daylight-savings time
-zone.
-
-The TZ environment variable is expected to be in the following POSIX
-format:
-
-  stdoffset1[dst[offset2][,start[/time1],end[/time2]]]
-
-where: std is the name of the standard time-zone (minimum 3 chars)
-       offset1 is the value to add to local time to arrive at Universal time
-         it has the form:  hh[:mm[:ss]]
-       dst is the name of the alternate (daylight-savings) time-zone (min 3 chars)
-       offset2 is the value to add to local time to arrive at Universal time
-         it has the same format as the std offset
-       start is the day that the alternate time-zone starts
-       time1 is the optional time that the alternate time-zone starts
-         (this is in local time and defaults to 02:00:00 if not specified)
-       end is the day that the alternate time-zone ends
-       time2 is the time that the alternate time-zone ends
-         (it is in local time and defaults to 02:00:00 if not specified)
-
-Note that there is no white-space padding between fields.  Also note that
-if TZ is null, the default is Universal GMT which has no daylight-savings
-time.  If TZ is empty, the default EST5EDT is used.
-
-The function <<_tzset_r>> is identical to <<tzset>> only it is reentrant
-and is used for applications that use multiple threads.
-
-RETURNS
-There is no return value.
-
-PORTABILITY
-<<tzset>> is part of the POSIX standard.
-
-Supporting OS subroutine required: None
-*/
-
-#include <_ansi.h>
-#include <reent.h>
-#include <time.h>
-#include "local.h"
-
-_VOID
-_DEFUN_VOID (tzset)
-{
-  _tzset_r (_REENT);
-}
diff --git a/newlib/libc/time/tzset_r.c b/newlib/libc/time/tzset_r.c
deleted file mode 100644
index ad8267d1b..000000000
--- a/newlib/libc/time/tzset_r.c
+++ /dev/null
@@ -1,207 +0,0 @@
-#include <_ansi.h>
-#include <reent.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include "local.h"
-
-static char __tzname_std[11];
-static char __tzname_dst[11];
-static char *prev_tzenv = NULL;
-
-/* default to GMT */
-char *_tzname[2] = {"GMT" "GMT"};
-int _daylight = 0;
-time_t _timezone = (time_t)0;
-
-int __tzyear = 0;
-
-int __tznorth = 1;
-
-__tzrule_type __tzrule[2] = { {'J', 0, 0, 0, 0, (time_t)0, 0 }, 
-			      {'J', 0, 0, 0, 0, (time_t)0, 0 } };
-
-_VOID
-_DEFUN (_tzset_r, (reent_ptr),
-        struct _reent *reent_ptr)
-{
-  char *tzenv;
-  unsigned short hh, mm, ss, m, w, d;
-  int sign, n;
-  int i, ch;
-
-  if ((tzenv = _getenv_r (reent_ptr, "TZ")) == NULL)
-      {
-	TZ_LOCK;
-	_timezone = (time_t)0;
-	_daylight = 0;
-	_tzname[0] = "GMT";
-	_tzname[1] = "GMT";
-	TZ_UNLOCK;
-	return;
-      }
-
-  TZ_LOCK;
-
-  if (prev_tzenv != NULL && strcmp(tzenv, prev_tzenv) == 0)
-    {
-      TZ_UNLOCK;
-      return;
-    }
-
-  free(prev_tzenv);
-  prev_tzenv = _malloc_r (reent_ptr, strlen(tzenv) + 1);
-  if (prev_tzenv != NULL)
-    strcpy (prev_tzenv, tzenv);
-
-  /* ignore implementation-specific format specifier */
-  if (*tzenv == ':')
-    ++tzenv;  
-
-  if (sscanf (tzenv, "%10[^0-9,+-]%n", __tzname_std, &n) <= 0)
-    {
-      TZ_UNLOCK;
-      return;
-    }
- 
-  tzenv += n;
-
-  sign = 1;
-  if (*tzenv == '-')
-    {
-      sign = -1;
-      ++tzenv;
-    }
-  else if (*tzenv == '+')
-    ++tzenv;
-
-  mm = 0;
-  ss = 0;
- 
-  if (sscanf (tzenv, "%hu%n:%hu%n:%hu%n", &hh, &n, &mm, &n, &ss, &n) < 1)
-    {
-      TZ_UNLOCK;
-      return;
-    }
-  
-  __tzrule[0].offset = sign * (ss + SECSPERMIN * mm + SECSPERHOUR * hh);
-  _tzname[0] = __tzname_std;
-  tzenv += n;
-  
-  if (sscanf (tzenv, "%10[^0-9,+-]%n", __tzname_dst, &n) <= 0)
-    {
-      _tzname[1] = _tzname[0];
-      TZ_UNLOCK;
-      return;
-    }
-  else
-    _tzname[1] = __tzname_dst;
-
-  tzenv += n;
-
-  /* otherwise we have a dst name, look for the offset */
-  sign = 1;
-  if (*tzenv == '-')
-    {
-      sign = -1;
-      ++tzenv;
-    }
-  else if (*tzenv == '+')
-    ++tzenv;
-
-  hh = 0;  
-  mm = 0;
-  ss = 0;
-  
-  if (sscanf (tzenv, "%hu%n:%hu%n:%hu%n", &hh, &n, &mm, &n, &ss, &n) <= 0)
-    __tzrule[1].offset = __tzrule[0].offset - 3600;
-  else
-    __tzrule[1].offset = sign * (ss + SECSPERMIN * mm + SECSPERHOUR * hh);
-
-  tzenv += n;
-
-  if (*tzenv == ',')
-    ++tzenv;
-
-  for (i = 0; i < 2; ++i)
-    {
-      if (*tzenv == 'M')
-	{
-	  if (sscanf (tzenv, "M%hu%n.%hu%n.%hu%n", &m, &n, &w, &n, &d, &n) != 3 ||
-	      m < 1 || m > 12 || w < 1 || w > 5 || d > 6)
-	    {
-	      TZ_UNLOCK;
-	      return;
-	    }
-	  
-	  __tzrule[i].ch = 'M';
-	  __tzrule[i].m = m;
-	  __tzrule[i].n = w;
-	  __tzrule[i].d = d;
-	  
-	  tzenv += n;
-	}
-      else 
-	{
-	  char *end;
-	  if (*tzenv == 'J')
-	    {
-	      ch = 'J';
-	      ++tzenv;
-	    }
-	  else
-	    ch = 'D';
-	  
-	  d = strtoul (tzenv, &end, 10);
-	  
-	  /* if unspecified, default to US settings */
-	  if (end == tzenv)
-	    {
-	      if (i == 0)
-		{
-		  __tzrule[0].ch = 'M';
-		  __tzrule[0].m = 4;
-		  __tzrule[0].n = 1;
-		  __tzrule[0].d = 0;
-		}
-	      else
-		{
-		  __tzrule[1].ch = 'M';
-		  __tzrule[1].m = 10;
-		  __tzrule[1].n = 5;
-		  __tzrule[1].d = 0;
-		}
-	    }
-	  else
-	    {
-	      __tzrule[i].ch = ch;
-	      __tzrule[i].d = d;
-	    }
-	  
-	  tzenv = end;
-	}
-      
-      /* default time is 02:00:00 am */
-      hh = 2;
-      mm = 0;
-      ss = 0;
-      
-      if (*tzenv == '/')
-	sscanf (tzenv, "%hu%n:%hu%n:%hu%n", &hh, &n, &mm, &n, &ss, &n);
-
-      __tzrule[i].s = ss + SECSPERMIN * mm + SECSPERHOUR  * hh;
-    }
-
-  __tzcalc_limits (__tzyear);
-  _timezone = (time_t)(__tzrule[0].offset);  
-  _daylight = __tzrule[0].offset != __tzrule[1].offset;
-
-  TZ_UNLOCK;
-}
-
-
-
-
-
diff --git a/newlib/libc/unix/Makefile.am b/newlib/libc/unix/Makefile.am
deleted file mode 100644
index 24d1bfb5c..000000000
--- a/newlib/libc/unix/Makefile.am
+++ /dev/null
@@ -1,72 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	getcwd.c 	\
-	pread.c 	\
-	pwrite.c 	\
-	sigset.c
-
-## Distinguish different EL/IX level interfaces
-ELIX_2_OBJS = \
-	ttyname.$(oext)
-
-ELIX_4_OBJS = \
-	getlogin.$(oext)	\
-	getpass.$(oext) 	\
-	getpwent.$(oext) 	\
-	getut.$(oext)
-
-if ELIX_LEVEL_1
-LIB_OBJS =
-else
-if ELIX_LEVEL_2
-LIB_OBJS = $(ELIX_2_OBJS)
-else
-if ELIX_LEVEL_3
-LIB_OBJS = $(ELIX_2_OBJS)
-else
-if ELIX_LEVEL_4
-LIB_OBJS = $(ELIX_2_OBJS) $(ELIX_4_OBJS)
-endif
-endif
-endif
-endif
-
-libunix_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libunix.la
-libunix_la_SOURCES = $(GENERAL_SOURCES)
-libunix_la_LIBADD = $(LIB_OBJS)
-libunix_la_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(GENERAL_SOURCES)
-lib_a_LIBADD = $(LIB_OBJS)
-lib_a_DEPENDENCIES = $(LIB_OBJS)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-CHEWOUT_FILES =
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-# No doc for unix.
-doc:
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
diff --git a/newlib/libc/unix/Makefile.in b/newlib/libc/unix/Makefile.in
deleted file mode 100644
index 56e5c1b58..000000000
--- a/newlib/libc/unix/Makefile.in
+++ /dev/null
@@ -1,411 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CRT0 = @CRT0@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
-LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
-LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
-LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
-LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
-LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
-LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
-LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
-LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
-LIBC_SYS_LIB = @LIBC_SYS_LIB@
-LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-extra_dir = @extra_dir@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-GENERAL_SOURCES = \
-	getcwd.c 	\
-	pread.c 	\
-	pwrite.c 	\
-	sigset.c
-
-
-ELIX_2_OBJS = \
-	ttyname.$(oext)
-
-
-ELIX_4_OBJS = \
-	getlogin.$(oext)	\
-	getpass.$(oext) 	\
-	getpwent.$(oext) 	\
-	getut.$(oext)
-
-@ELIX_LEVEL_1_TRUE@LIB_OBJS = 
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_TRUE@$(ELIX_2_OBJS)
-@ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@@ELIX_LEVEL_4_TRUE@LIB_OBJS = @ELIX_LEVEL_1_FALSE@@ELIX_LEVEL_2_FALSE@@ELIX_LEVEL_3_FALSE@@ELIX_LEVEL_4_TRUE@$(ELIX_2_OBJS) $(ELIX_4_OBJS)
-
-libunix_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libunix.la
-@USE_LIBTOOL_TRUE@libunix_la_SOURCES = @USE_LIBTOOL_TRUE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_TRUE@libunix_la_LIBADD = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@libunix_la_DEPENDENCIES = @USE_LIBTOOL_TRUE@$(LIB_OBJS)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(GENERAL_SOURCES)
-@USE_LIBTOOL_FALSE@lib_a_LIBADD = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-@USE_LIBTOOL_FALSE@lib_a_DEPENDENCIES = @USE_LIBTOOL_FALSE@$(LIB_OBJS)
-
-CHEWOUT_FILES = 
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(CHEWOUT_FILES) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  getcwd.$(OBJEXT) pread.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@pwrite.$(OBJEXT) sigset.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libunix_la_OBJECTS =  getcwd.lo pread.lo pwrite.lo \
-@USE_LIBTOOL_TRUE@sigset.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libunix_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libunix_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus unix/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libunix.la: $(libunix_la_OBJECTS) $(libunix_la_DEPENDENCIES)
-	$(LINK)  $(libunix_la_LDFLAGS) $(libunix_la_OBJECTS) $(libunix_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = unix
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-# No doc for unix.
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libc/unix/getcwd.c b/newlib/libc/unix/getcwd.c
deleted file mode 100644
index 826fc789d..000000000
--- a/newlib/libc/unix/getcwd.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Copyright (c) 1989, 1991 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getcwd.c	5.11 (Berkeley) 2/24/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/stat.h>
-#include <errno.h>
-#include <dirent.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <reent.h>
-#include <_syslist.h>
-
-#define bcopy(a,b,c)	memmove (b,a,c)
-
-#define	ISDOT(dp) \
-	(dp->d_name[0] == '.' && (dp->d_name[1] == '\0' || \
-           (dp->d_name[1] == '.' && dp->d_name[2] == '\0')))
-
-#ifndef _REENT_ONLY
-
-char *
-getcwd (pt, size)
-     char *pt;
-     size_t size;
-{
-  register struct dirent *dp;
-  register DIR *dir;
-  register dev_t dev;
-  register ino_t ino;
-  register int first;
-  register char *bpt, *bup;
-  struct stat s;
-  dev_t root_dev;
-  ino_t root_ino;
-  size_t ptsize, upsize;
-  int save_errno;
-  char *ept, *eup, *up;
-
-  /*
-   * If no buffer specified by the user, allocate one as necessary.
-   * If a buffer is specified, the size has to be non-zero.  The path
-   * is built from the end of the buffer backwards.
-   */
-
-  if (pt)
-    {
-      ptsize = 0;
-      if (!size)
-	{
-	  errno = EINVAL;
-	  return (char *) NULL;
-	}
-      ept = pt + size;
-    }
-  else
-    {
-      if (!(pt = (char *) malloc (ptsize = 1024 - 4)))
-	{
-	  return (char *) NULL;
-	}
-      ept = pt + ptsize;
-    }
-  bpt = ept - 1;
-  *bpt = '\0';
-
-  /*
-   * Allocate bytes (1024 - malloc space) for the string of "../"'s.
-   * Should always be enough (it's 340 levels).  If it's not, allocate
-   * as necessary.  Special * case the first stat, it's ".", not "..".
-   */
-
-  if (!(up = (char *) malloc (upsize = 1024 - 4)))
-    {
-      goto err;
-    }
-  eup = up + MAXPATHLEN;
-  bup = up;
-  up[0] = '.';
-  up[1] = '\0';
-
-  /* Save root values, so know when to stop. */
-  if (stat ("/", &s))
-    goto err;
-  root_dev = s.st_dev;
-  root_ino = s.st_ino;
-
-  errno = 0;			/* XXX readdir has no error return. */
-
-  for (first = 1;; first = 0)
-    {
-      /* Stat the current level. */
-      if (_stat (up, &s))
-	goto err;
-
-      /* Save current node values. */
-      ino = s.st_ino;
-      dev = s.st_dev;
-
-      /* Check for reaching root. */
-      if (root_dev == dev && root_ino == ino)
-	{
-	  *--bpt = '/';
-	  /*
-	   * It's unclear that it's a requirement to copy the
-	   * path to the beginning of the buffer, but it's always
-	   * been that way and stuff would probably break.
-	   */
-	  (void) bcopy (bpt, pt, ept - bpt);
-	  free (up);
-	  return pt;
-	}
-
-      /*
-       * Build pointer to the parent directory, allocating memory
-       * as necessary.  Max length is 3 for "../", the largest
-       * possible component name, plus a trailing NULL.
-       */
-
-      if (bup + 3 + MAXNAMLEN + 1 >= eup)
-	{
-	  if (!(up = (char *) realloc (up, upsize *= 2)))
-	    {
-	      goto err;
-	    }
-	  bup = up;
-	  eup = up + upsize;
-	}
-      *bup++ = '.';
-      *bup++ = '.';
-      *bup = '\0';
-
-      /* Open and stat parent directory. */
-      if (!(dir = _opendir (up)) || _fstat (__dirfd (dir), &s))
-	goto err;
-
-      /* Add trailing slash for next directory. */
-      *bup++ = '/';
-
-      /*
-       * If it's a mount point, have to stat each element because
-       * the inode number in the directory is for the entry in the
-       * parent directory, not the inode number of the mounted file.
-       */
-
-      save_errno = 0;
-      if (s.st_dev == dev)
-	{
-	  for (;;)
-	    {
-	      if (!(dp = _readdir (dir)))
-		goto notfound;
-	      if (dp->d_ino == ino)
-		break;
-	    }
-	}
-      else
-	for (;;)
-	  {
-	    if (!(dp = _readdir (dir)))
-	      goto notfound;
-	    if (ISDOT (dp))
-	      continue;
-	    bcopy (dp->d_name, bup, strlen (dp->d_name) + 1);
-
-	    /* Save the first error for later. */
-	    if (stat (up, &s))
-	      {
-		if (!save_errno)
-		  save_errno = errno;
-		errno = 0;
-		continue;
-	      }
-	    if (s.st_dev == dev && s.st_ino == ino)
-	      break;
-	  }
-
-      /*
-       * Check for length of the current name, preceding slash,
-       * leading slash.
-       */
-
-      if (bpt - pt <= strlen (dp->d_name) + (first ? 1 : 2))
-	{
-	  size_t len, off;
-
-	  if (!ptsize)
-	    {
-	      errno = ERANGE;
-	      goto err;
-	    }
-	  off = bpt - pt;
-	  len = ept - bpt;
-	  if (!(pt = (char *) realloc (pt, ptsize *= 2)))
-	    {
-	      goto err;
-	    }
-	  bpt = pt + off;
-	  ept = pt + ptsize;
-	  (void) bcopy (bpt, ept - len, len);
-	  bpt = ept - len;
-	}
-      if (!first)
-	*--bpt = '/';
-      bpt -= strlen (dp->d_name);
-      bcopy (dp->d_name, bpt, strlen (dp->d_name));
-      (void) _closedir (dir);
-
-      /* Truncate any file name. */
-      *bup = '\0';
-    }
-
-notfound:
-  /*
-   * If readdir set errno, use it, not any saved error; otherwise,
-   * didn't find the current directory in its parent directory, set
-   * errno to ENOENT.
-   */
-
-  if (!errno)
-    errno = save_errno ? save_errno : ENOENT;
-  /* FALLTHROUGH */
-
-err:
-  if (ptsize)
-    free (pt);
-  free (up);
-  return (char *) NULL;
-}
-
-#endif /* _REENT_ONLY */
diff --git a/newlib/libc/unix/getlogin.c b/newlib/libc/unix/getlogin.c
deleted file mode 100644
index e043b029f..000000000
--- a/newlib/libc/unix/getlogin.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <utmp.h>
-#include <fcntl.h>
-#include <_syslist.h>
-
-char *
-getlogin ()
-{
-  int utmp_fd;
-  struct utmp utmp_buf;
-  static char buf[10];
-  extern char *ttyname ();
-  char *tty;
-
-  if (((tty = ttyname (0)) == 0)
-      || ((tty = ttyname (1)) == 0)
-      || ((tty = ttyname (2)) == 0))
-    return 0;
-
-  if ((utmp_fd = _open (UTMP_FILE, O_RDONLY)) == -1)
-    return 0;
-
-  if (!strncmp (tty, "/dev/", 5))
-    tty += 5;
-
-  while (_read (utmp_fd, &utmp_buf, sizeof (utmp_buf)) == sizeof (utmp_buf))
-    {
-      if (!strncmp (tty, utmp_buf.ut_line, sizeof (utmp_buf.ut_line))
-	  && utmp_buf.ut_type == USER_PROCESS)
-	{
-	  _close (utmp_fd);
-	  memset (buf, 0, sizeof (buf));
-	  strncpy (buf, utmp_buf.ut_user, sizeof (utmp_buf.ut_user));
-	  return buf;
-	}
-    }
-
-  _close (utmp_fd);
-  return 0;
-}
diff --git a/newlib/libc/unix/getpass.c b/newlib/libc/unix/getpass.c
deleted file mode 100644
index db0e52d61..000000000
--- a/newlib/libc/unix/getpass.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) 1988 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)getpass.c	5.9 (Berkeley) 5/6/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <sys/termios.h>
-#include <sys/signal.h>
-#include <_syslist.h>
-
-#ifndef _PATH_PASSWD
-#define _PATH_PASSWD            "/etc/passwd"
-#endif
-
-#ifndef _PASSWORD_LEN
-#define _PASSWORD_LEN           128     /* max length, not counting NULL */
-#endif
-
-char *
-getpass (prompt)
-     const char *prompt;
-{
-  struct termios term;
-  register int ch;
-  register char *p;
-  FILE *fp, *outfp;
-  long omask;
-  int echo;
-  static char buf[_PASSWORD_LEN + 1];
-
-  /*
-   * read and write to /dev/tty if possible; else read from
-   * stdin and write to stderr.
-   */
-
-  if ((outfp = fp = fopen ("/dev/tty", "w+")) == NULL)
-    {
-      outfp = stderr;
-      fp = stdin;
-    }
-  /*
-   * note - blocking signals isn't necessarily the
-   * right thing, but we leave it for now.
-   */
-  omask = sigblock (sigmask (SIGINT) | sigmask (SIGTSTP));
-  (void) tcgetattr (fileno (fp), &term);
-  echo = (term.c_lflag & ECHO);
-  if (echo)
-    {
-      term.c_lflag &= ~ECHO;
-      (void) tcsetattr (fileno (fp), TCSAFLUSH, &term);
-    }
-  (void) fputs (prompt, outfp);
-  rewind (outfp);		/* implied flush */
-  for (p = buf; (ch = getc (fp)) != EOF && ch != '\n';)
-    if (p < buf + _PASSWORD_LEN)
-      *p++ = ch;
-  *p = '\0';
-  (void) _write (fileno (outfp), "\n", 1);
-  if (echo)
-    {
-      term.c_lflag |= ECHO;
-      tcsetattr (fileno (fp), TCSAFLUSH, &term);
-    }
-  (void) sigsetmask (omask);
-  if (fp != stdin)
-    (void) fclose (fp);
-  return buf;
-}
diff --git a/newlib/libc/unix/getpwent.c b/newlib/libc/unix/getpwent.c
deleted file mode 100644
index 5390c682f..000000000
--- a/newlib/libc/unix/getpwent.c
+++ /dev/null
@@ -1,127 +0,0 @@
-#include <stdio.h>
-#include <sys/types.h>
-#include <pwd.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-
-static struct passwd pw_passwd;	/* password structure */
-static FILE *passwd_fp;
-
-static char logname[8];
-static char password[1024];
-static char gecos[1024];
-static char dir[1024];
-static char shell[1024];
-
-struct passwd *
-getpwnam (name)
-     const char *name;
-{
-  FILE *fp;
-  char buf[1024];
-
-  if ((fp = fopen ("/etc/passwd", "r")) == NULL)
-    {
-      return NULL;
-    }
-
-  while (fgets (buf, sizeof (buf), fp))
-    {
-      sscanf (buf, "%[^:]:%[^:]:%d:%d:%[^:]:%[^:]:%s\n",
-	      logname, password, &pw_passwd.pw_uid,
-             &pw_passwd.pw_gid, gecos,
-	      dir, shell);
-      pw_passwd.pw_name = logname;
-      pw_passwd.pw_passwd = password;
-      pw_passwd.pw_comment = "";
-      pw_passwd.pw_gecos = gecos;
-      pw_passwd.pw_dir = dir;
-      pw_passwd.pw_shell = shell;
-
-      if (!strcmp (logname, name))
-	{
-	  fclose (fp);
-	  return &pw_passwd;
-	}
-    }
-  fclose (fp);
-  return NULL;
-}
-
-struct passwd *
-getpwuid (uid_t uid)
-{
-  FILE *fp;
-  char buf[1024];
-
-  if ((fp = fopen ("/etc/passwd", "r")) == NULL)
-    {
-      return NULL;
-    }
-
-  while (fgets (buf, sizeof (buf), fp))
-    {
-      sscanf (buf, "%[^:]:%[^:]:%d:%d:%[^:]:%[^:]:%s\n",
-	      logname, password, &pw_passwd.pw_uid,
-             &pw_passwd.pw_gid, gecos,
-	      dir, shell);
-      pw_passwd.pw_name = logname;
-      pw_passwd.pw_passwd = password;
-      pw_passwd.pw_comment = "";
-      pw_passwd.pw_gecos = gecos;
-      pw_passwd.pw_dir = dir;
-      pw_passwd.pw_shell = shell;
-
-      if (uid == pw_passwd.pw_uid)
-	{
-	  fclose (fp);
-	  return &pw_passwd;
-	}
-    }
-  fclose (fp);
-  return NULL;
-}
-
-struct passwd *
-getpwent ()
-{
-  char buf[1024];
-
-  if (passwd_fp == NULL)
-    return NULL;
-
-  if (fgets (buf, sizeof (buf), passwd_fp) == NULL)
-    return NULL;
-
-  sscanf (buf, "%[^:]:%[^:]:%d:%d:%[^:]:%[^:]:%s\n",
-	  logname, password, &pw_passwd.pw_uid,
-         &pw_passwd.pw_gid, gecos,
-	  dir, shell);
-  pw_passwd.pw_name = logname;
-  pw_passwd.pw_passwd = password;
-  pw_passwd.pw_comment = "";
-  pw_passwd.pw_gecos = gecos;
-  pw_passwd.pw_dir = dir;
-  pw_passwd.pw_shell = shell;
-
-  return &pw_passwd;
-}
-
-void
-setpwent ()
-{
-  if (passwd_fp != NULL)
-    fclose (passwd_fp);
-
-  passwd_fp = fopen ("/etc/passwd", "r");
-}
-
-void
-endpwent ()
-{
-  if (passwd_fp != NULL)
-    fclose (passwd_fp);
-}
diff --git a/newlib/libc/unix/getut.c b/newlib/libc/unix/getut.c
deleted file mode 100644
index 1e2b75596..000000000
--- a/newlib/libc/unix/getut.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <utmp.h>
-#include <_syslist.h>
-#include <_ansi.h>
-
-static int utmp_fd = -2;
-static char *utmp_file = UTMP_FILE;
-
-static struct utmp utmp_data;
-
-void
-setutent ()
-{
-  if (utmp_fd == -2)
-    {
-      utmp_fd = _open (utmp_file, O_RDONLY);
-    }
-  _lseek (utmp_fd, 0, SEEK_SET);
-}
-
-void
-endutent ()
-{
-  _close (utmp_fd);
-  utmp_fd = -2;
-}
-
-void
-utmpname (_CONST char *file)
-{
-  utmp_file = strdup (file);
-}
-
-struct utmp *
-getutent ()
-{
-  if (utmp_fd == -2)
-    setutent ();
-  if (_read (utmp_fd, &utmp_data, sizeof (utmp_data)) < sizeof (utmp_data))
-    return 0;
-  return &utmp_data;
-}
-
-struct utmp *
-getutid (struct utmp *id)
-{
-  while (_read (utmp_fd, &utmp_data, sizeof (utmp_data)) == sizeof (utmp_data))
-    {
-      switch (id->ut_type)
-	{
-	case RUN_LVL:
-	case BOOT_TIME:
-	case OLD_TIME:
-	case NEW_TIME:
-	  if (id->ut_type == utmp_data.ut_type)
-	    return &utmp_data;
-	case INIT_PROCESS:
-	case LOGIN_PROCESS:
-	case USER_PROCESS:
-	case DEAD_PROCESS:
-	  if (id->ut_id == utmp_data.ut_id)
-	    return &utmp_data;
-	default:
-	  abort ();
-	}
-    }
-  return 0;
-}
-
-struct utmp *
-getutline (struct utmp *line)
-{
-  while (_read (utmp_fd, &utmp_data, sizeof (utmp_data)) == sizeof (utmp_data))
-    {
-      if ((utmp_data.ut_type == LOGIN_PROCESS ||
-	   utmp_data.ut_type == USER_PROCESS) &&
-	  !strncmp (utmp_data.ut_line, line->ut_line,
-		    sizeof (utmp_data.ut_line)))
-	return &utmp_data;
-    }
-
-  return 0;
-}
diff --git a/newlib/libc/unix/pread.c b/newlib/libc/unix/pread.c
deleted file mode 100644
index 72087542e..000000000
--- a/newlib/libc/unix/pread.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-FUNCTION
-<<pread>>---read a file from specified position
-
-INDEX
-	pread
-INDEX
-	_pread_r
-
-ANSI_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pread(int <[fd]>, void *<[buf]>, size_t <[n]>, off_t <[off]>);
-	ssize_t _pread_r(struct _reent *<[rptr]>, int <[fd]>, 
-                         void *<[buf]>, size_t <[n]>, off_t <[off]>);
-
-TRAD_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pread(<[fd]>, <[buf]>, <[n]>, <[off]>)
-	int <[fd]>;
-	void *<[buf]>;
-	size_t <[n]>;
-	off_t <[off]>;
-
-	ssize_t _pread_r(<[rptr]>, <[fd]>, <[buf]>, <[n]>, <[off]>)
-	struct _reent *<[rptr]>;
-	int <[fd]>;
-	void *<[buf]>;
-	size_t <[n]>;
-	off_t <[off]>;
-
-DESCRIPTION
-The <<pread>> function is similar to <<read>>.  One difference is that
-<<pread>> has an additional parameter <[off]> which is the offset to
-position in the file before reading.  The function also differs in that
-the file position is unchanged by the function (i.e. the file position
-is the same before and after a call to <<pread>>).
-
-The <<_pread_r>> function is the same as <<pread>>, only a reentrant
-struct pointer <[rptr]> is provided to preserve reentrancy.
-
-RETURNS
-<<pread>> returns the number of bytes read or <<-1>> if failure occurred.
-
-PORTABILITY
-<<pread>> is non-ANSI and is specified by the Single Unix Specification.
-
-Supporting OS subroutine required: <<read>>, <<lseek>>.
-*/
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-
-ssize_t
-_DEFUN (_pread_r, (rptr, fd, buf, n, off),
-     struct _reent *rptr _AND
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  off_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_read;
-  
-  if ((cur_pos = _lseek_r (rptr, fd, 0, SEEK_CUR)) == (off_t)-1)
-    return -1;
-
-  if (_lseek_r (rptr, fd, off, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  num_read = _read_r (rptr, fd, buf, n);
-
-  if (_lseek_r (rptr, fd, cur_pos, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  return (ssize_t)num_read;
-}
-
-#ifndef _REENT_ONLY
-
-ssize_t
-_DEFUN (pread, (fd, buf, n, off),
-     int fd _AND
-     _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  return _pread_r (_REENT, fd, buf, n, off);
-}
-
-#endif
diff --git a/newlib/libc/unix/pwrite.c b/newlib/libc/unix/pwrite.c
deleted file mode 100644
index 23979ac79..000000000
--- a/newlib/libc/unix/pwrite.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-FUNCTION
-<<pwrite>>---write a file from specified position
-
-INDEX
-	pwrite
-INDEX
-	_pwrite_r
-
-ANSI_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pwrite(int <[fd]>, const void *<[buf]>, 
-                       size_t <[n]>, off_t <[off]>);
-	ssize_t _pwrite_r(struct _reent *<[rptr]>, int <[fd]>, 
-                          const void *<[buf]>, size_t <[n]>, off_t <[off]>);
-
-TRAD_SYNOPSIS
-	#include <unistd.h>
-	ssize_t pwrite(<[fd]>, <[buf]>, <[n]>, <[off]>)
-	int <[fd]>;
-	const void *<[buf]>;
-	size_t <[n]>;
-	off_t <[off]>;
-
-	ssize_t _pwrite_r(<[rptr]>, <[fd]>, <[buf]>, <[n]>, <[off]>)
-	struct _reent *<[rptr]>;
-	int <[fd]>;
-	const void *<[buf]>;
-	size_t <[n]>;
-	off_t <[off]>;
-
-DESCRIPTION
-The <<pwrite>> function is similar to <<write>>.  One difference is that
-<<pwrite>> has an additional parameter <[off]> which is the offset to
-position in the file before writing.  The function also differs in that
-the file position is unchanged by the function (i.e. the file position
-is the same before and after a call to <<pwrite>>).
-
-The <<_pwrite_r>> function is the same as <<pwrite>>, only a reentrant
-struct pointer <[rptr]> is provided to preserve reentrancy.
-
-RETURNS
-<<pwrite>> returns the number of bytes written or <<-1>> if failure occurred.
-
-PORTABILITY
-<<pwrite>> is non-ANSI and is specified by the Single Unix Specification.
-
-Supporting OS subroutine required: <<write>>, <<lseek>>.
-*/
-
-#include <_ansi.h>
-#include <unistd.h>
-#include <reent.h>
-
-ssize_t
-_DEFUN (_pwrite_r, (rptr, fd, buf, n, off),
-     struct _reent *rptr _AND
-     int fd _AND
-     _CONST _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  off_t cur_pos;
-  _READ_WRITE_RETURN_TYPE num_written;
-  
-  if ((cur_pos = _lseek_r (rptr, fd, 0, SEEK_CUR)) == (off_t)-1)
-    return -1;
-
-  if (_lseek_r (rptr, fd, off, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  num_written = _write_r (rptr, fd, buf, n);
-
-  if (_lseek_r (rptr, fd, cur_pos, SEEK_SET) == (off_t)-1)
-    return -1;
-
-  return (ssize_t)num_written;
-}
-
-#ifndef _REENT_ONLY
-
-ssize_t
-_DEFUN (pwrite, (fd, buf, n, off),
-     int fd _AND
-     _CONST _PTR buf _AND
-     size_t n _AND
-     off_t off)
-{
-  return _pwrite_r (_REENT, fd, buf, n, off);
-}
-
-#endif
diff --git a/newlib/libc/unix/sigset.c b/newlib/libc/unix/sigset.c
deleted file mode 100644
index cd73a78c8..000000000
--- a/newlib/libc/unix/sigset.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include <signal.h>
-#include <errno.h>
-
-#if defined(SIG_SETMASK) && NSIG <= 32	/* easier than trying to remove from Makefile */
-
-#undef sigemptyset
-int
-sigemptyset (sigset_t * set)
-{
-  *set = (sigset_t) 0;
-  return 0;
-}
-
-int
-sigfillset (sigset_t * set)
-{
-  *set = ~((sigset_t) 0);
-  return 0;
-}
-
-#undef sigaddset
-int
-sigaddset (sigset_t * set, int signo)
-{
-  if (signo >= NSIG || signo <= 0)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-  *set |= 1 << (signo - 1);
-  return 0;
-}
-
-int
-sigdelset (sigset_t * set, int signo)
-{
-  if (signo >= NSIG || signo <= 0)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-  *set &= ~(1 << (signo - 1));
-  return 0;
-}
-
-int
-sigismember (const sigset_t * set, int signo)
-{
-  if (signo >= NSIG || signo <= 0)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-
-  if (*set & (1 << (signo - 1)))
-    return 1;
-  else
-    return 0;
-}
-
-#endif /* SIG_SETMASK */
diff --git a/newlib/libc/unix/ttyname.c b/newlib/libc/unix/ttyname.c
deleted file mode 100644
index 258ba25fe..000000000
--- a/newlib/libc/unix/ttyname.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 1988 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char sccsid[] = "@(#)ttyname.c	5.10 (Berkeley) 5/6/91";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <termios.h>
-#include <unistd.h>
-#include <string.h>
-#include <paths.h>
-#include <_syslist.h>
-
-static char buf[sizeof (_PATH_DEV) + MAXNAMLEN] = _PATH_DEV;
-
-char *
-ttyname (fd)
-     int fd;
-{
-  struct stat sb;
-  struct termios tty;
-  struct dirent *dirp;
-  DIR *dp;
-  struct stat dsb;
-  char *rval;
-
-  /* Must be a terminal. */
-  if (tcgetattr (fd, &tty) < 0)
-    return NULL;
-
-  /* Must be a character device. */
-  if (_fstat (fd, &sb) || !S_ISCHR (sb.st_mode))
-    return NULL;
-
-  if ((dp = _opendir (_PATH_DEV)) == NULL)
-    return NULL;
-
-  for (rval = NULL; dirp = _readdir (dp);)
-    {
-      if (dirp->d_ino != sb.st_ino)
-	continue;
-      strcpy (buf + sizeof (_PATH_DEV) - 1, dirp->d_name);
-      if (stat (buf, &dsb) || sb.st_dev != dsb.st_dev ||
-	  sb.st_ino != dsb.st_ino)
-	continue;
-      (void) _closedir (dp);
-      rval = buf;
-      break;
-    }
-  (void) _closedir (dp);
-  return rval;
-}
diff --git a/newlib/libm/Makefile.am b/newlib/libm/Makefile.am
deleted file mode 100644
index 3b8d9a586..000000000
--- a/newlib/libm/Makefile.am
+++ /dev/null
@@ -1,63 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-if NEWLIB_HW_FP
-MATHDIR = mathfp
-else
-MATHDIR = math
-endif
-
-SUBDIRS = $(MATHDIR) common machine
-
-libm_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-SUBLIBS = $(MATHDIR)/lib$(MATHDIR).$(aext) common/libcommon.$(aext) $(LIBM_MACHINE_LIB)
-noinst_LTLIBRARIES = libm.la
-libm_la_SOURCES =
-libm_la_LIBADD = $(SUBLIBS)
-else
-SUBLIBS = $(MATHDIR)/lib.$(aext) common/lib.$(aext) $(LIBM_MACHINE_LIB)
-noinst_LIBRARIES = libm.a
-libm.a: $(SUBLIBS)
-	rm -f $@
-	rm -rf tmp
-	mkdir tmp
-	cd tmp; \
-	  for i in $(SUBLIBS); do \
-	    $(AR) x ../$$i; \
-	done; \
-	$(AR) $(AR_FLAGS) ../$@ *.o
-	$(RANLIB) $@
-	rm -rf tmp
-endif
-
-$(SUBLIBS):
-
-info_TEXINFOS = libm.texinfo
-
-libm.info: targetdep.tex math/stmp-def
-
-stmp-targetdep: force
-	rm -f tmp.texi
-	targetdoc=`pwd`/tmp.texi; \
-	for d in $(SUBDIRS); do \
-	  if test "$$d" != "."; then \
-	    (cd $$d && $(MAKE) doc) || exit 1; \
-	  fi; \
-	done
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
-	touch $@
-
-targetdep.tex: stmp-targetdep ; @true
-
-math/stmp-def: stmp-targetdep ; @true
-
-.PHONY: force
-force:
-
-CLEANFILES = tmp.texi targetdep.tex stmp-targetdep
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libm/Makefile.in b/newlib/libm/Makefile.in
deleted file mode 100644
index 2ba703708..000000000
--- a/newlib/libm/Makefile.in
+++ /dev/null
@@ -1,627 +0,0 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBM_MACHINE_LIB = @LIBM_MACHINE_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-@NEWLIB_HW_FP_TRUE@MATHDIR = @NEWLIB_HW_FP_TRUE@mathfp
-@NEWLIB_HW_FP_FALSE@MATHDIR = @NEWLIB_HW_FP_FALSE@math
-
-SUBDIRS = $(MATHDIR) common machine
-
-libm_la_LDFLAGS = -Xcompiler -nostdlib
-@USE_LIBTOOL_TRUE@SUBLIBS = @USE_LIBTOOL_TRUE@$(MATHDIR)/lib$(MATHDIR).$(aext) common/libcommon.$(aext) $(LIBM_MACHINE_LIB)
-@USE_LIBTOOL_FALSE@SUBLIBS = @USE_LIBTOOL_FALSE@$(MATHDIR)/lib.$(aext) common/lib.$(aext) $(LIBM_MACHINE_LIB)
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libm.la
-@USE_LIBTOOL_TRUE@libm_la_SOURCES = 
-@USE_LIBTOOL_TRUE@libm_la_LIBADD = @USE_LIBTOOL_TRUE@$(SUBLIBS)
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@libm.a
-
-info_TEXINFOS = libm.texinfo
-
-CLEANFILES = tmp.texi targetdep.tex stmp-targetdep
-
-ACLOCAL_AMFLAGS = -I ..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-libm_a_LIBADD = 
-libm_a_SOURCES = libm.a.c
-libm_a_OBJECTS =  libm.a.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-@USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES =  \
-@USE_LIBTOOL_TRUE@$(MATHDIR)/lib$(MATHDIR).$(aext) \
-@USE_LIBTOOL_TRUE@common/libcommon.$(aext)
-@USE_LIBTOOL_TRUE@libm_la_OBJECTS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
-TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
-INFO_DEPS = libm.info
-DVIS = libm.dvi
-TEXINFOS = libm.texinfo
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-DIST_SUBDIRS =  mathfp math common machine
-SOURCES = libm.a.c $(libm_la_SOURCES)
-OBJECTS = libm.a.$(OBJEXT) $(libm_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .lo .o .obj .ps .s .texi .texinfo .txi
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../acinclude.m4 \
-		../aclocal.m4 ../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES)
-	$(LINK)  $(libm_la_LDFLAGS) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS)
-
-libm.info: libm.texinfo
-libm.dvi: libm.texinfo
-
-
-DVIPS = dvips
-
-.texi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.txi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
-	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f libm.aux libm.cp libm.cps libm.dvi libm.fn libm.fns libm.ky \
-	  libm.kys libm.ps libm.log libm.pg libm.toc libm.tp libm.tps \
-	  libm.vr libm.vrs libm.op libm.tr libm.cv libm.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-clean-info: mostlyclean-aminfo
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" != "." || dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(DIST_SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-aminfo clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-aminfo distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-aminfo maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-@USE_LIBTOOL_FALSE@libm.a: $(SUBLIBS)
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-@USE_LIBTOOL_FALSE@	mkdir tmp
-@USE_LIBTOOL_FALSE@	cd tmp; \
-@USE_LIBTOOL_FALSE@	  for i in $(SUBLIBS); do \
-@USE_LIBTOOL_FALSE@	    $(AR) x ../$$i; \
-@USE_LIBTOOL_FALSE@	done; \
-@USE_LIBTOOL_FALSE@	$(AR) $(AR_FLAGS) ../$@ *.o
-@USE_LIBTOOL_FALSE@	$(RANLIB) $@
-@USE_LIBTOOL_FALSE@	rm -rf tmp
-
-$(SUBLIBS):
-
-libm.info: targetdep.tex math/stmp-def
-
-stmp-targetdep: force
-	rm -f tmp.texi
-	targetdoc=`pwd`/tmp.texi; \
-	for d in $(SUBDIRS); do \
-	  if test "$$d" != "."; then \
-	    (cd $$d && $(MAKE) doc) || exit 1; \
-	  fi; \
-	done
-	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
-	touch $@
-
-targetdep.tex: stmp-targetdep ; @true
-
-math/stmp-def: stmp-targetdep ; @true
-
-.PHONY: force
-force:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/aclocal.m4 b/newlib/libm/aclocal.m4
deleted file mode 100644
index b93c4100d..000000000
--- a/newlib/libm/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libm/common/Makefile.am b/newlib/libm/common/Makefile.am
deleted file mode 100644
index 685219dd0..000000000
--- a/newlib/libm/common/Makefile.am
+++ /dev/null
@@ -1,113 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src = 	s_finite.c s_copysign.c s_modf.c s_scalbn.c \
-	s_cbrt.c s_expm1.c s_ilogb.c \
-	s_infinity.c s_log1p.c s_nan.c s_nextafter.c \
-	s_rint.c s_logb.c s_matherr.c s_lib_ver.c \
-	s_fdim.c s_fma.c s_fmax.c s_fmin.c s_fpclassify.c s_lrint.c \
-	s_lround.c s_nearbyint.c s_remquo.c s_round.c s_scalbln.c \
-	s_signbit.c s_trunc.c
-
-fsrc =	sf_finite.c sf_copysign.c sf_modf.c sf_scalbn.c \
-	sf_cbrt.c sf_expm1.c sf_ilogb.c \
-	sf_infinity.c sf_log1p.c sf_nan.c sf_nextafter.c \
-	sf_rint.c sf_logb.c \
-	sf_fdim.c sf_fma.c sf_fmax.c sf_fmin.c sf_lrint.c \
-	sf_lround.c sf_nearbyint.c sf_remquo.c sf_round.c \
-	sf_scalbln.c sf_trunc.c
-
-libcommon_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libcommon.la
-libcommon_la_SOURCES = $(src) $(fsrc)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(src) $(fsrc)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-chobj =	scbrt.def scopysign.def sexpm1.def silogb.def \
-	sinfinity.def slog1p.def smatherr.def smodf.def \
-	snan.def snextafter.def sscalbn.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(chobj)
-	cat $(srcdir)/common.tex >> $(TARGETDOC)
-
-CLEANFILES = $(chobj) *.ref
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-smodf.def: s_modf.c
-	$(CHEW) < $(srcdir)/s_modf.c >$@ 2>/dev/null
-	touch stmp-def
-
-scopysign.def: s_copysign.c
-	$(CHEW) < $(srcdir)/s_copysign.c >$@ 2>/dev/null
-	touch stmp-def
-
-sscalbn.def: s_scalbn.c
-	$(CHEW) < $(srcdir)/s_scalbn.c >$@ 2>/dev/null
-	touch stmp-def
-
-scbrt.def: s_cbrt.c
-	$(CHEW) < $(srcdir)/s_cbrt.c >$@ 2>/dev/null
-	touch stmp-def
-
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_serf.c >$@ 2>/dev/null
-	touch stmp-def
-
-sexpn.def: s_expm.c
-	$(CHEW) < $(srcdir)/s_expn.c >$@ 2>/dev/null
-	touch stmp-def
-
-sexpm1.def: s_expm1.c
-	$(CHEW) < $(srcdir)/s_expm1.c >$@ 2>/dev/null
-	touch stmp-def
-
-silogb.def: s_ilogb.c
-	$(CHEW) < $(srcdir)/s_ilogb.c >$@ 2>/dev/null
-	touch stmp-def
-
-sinfinity.def: s_infinity.c
-	$(CHEW) < $(srcdir)/s_infinity.c >$@ 2>/dev/null
-	touch stmp-def
-
-slog1p.def: s_log1p.c
-	$(CHEW) < $(srcdir)/s_log1p.c >$@ 2>/dev/null
-	touch stmp-def
-
-smatherr.def: s_matherr.c
-	$(CHEW) < $(srcdir)/s_matherr.c >$@ 2>/dev/null
-	touch stmp-def
-
-snan.def: s_nan.c
-	$(CHEW) < $(srcdir)/s_nan.c >$@ 2>/dev/null
-	touch stmp-def
-
-snextafter.def: s_nextafter.c
-	$(CHEW) < $(srcdir)/s_nextafter.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h fdlibm.h
diff --git a/newlib/libm/common/Makefile.in b/newlib/libm/common/Makefile.in
deleted file mode 100644
index 44ae1d3a2..000000000
--- a/newlib/libm/common/Makefile.in
+++ /dev/null
@@ -1,490 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBM_MACHINE_LIB = @LIBM_MACHINE_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src = s_finite.c s_copysign.c s_modf.c s_scalbn.c \
-	s_cbrt.c s_expm1.c s_ilogb.c \
-	s_infinity.c s_log1p.c s_nan.c s_nextafter.c \
-	s_rint.c s_logb.c s_matherr.c s_lib_ver.c \
-	s_fdim.c s_fma.c s_fmax.c s_fmin.c s_fpclassify.c s_lrint.c \
-	s_lround.c s_nearbyint.c s_remquo.c s_round.c s_scalbln.c \
-	s_signbit.c s_trunc.c
-
-
-fsrc = sf_finite.c sf_copysign.c sf_modf.c sf_scalbn.c \
-	sf_cbrt.c sf_expm1.c sf_ilogb.c \
-	sf_infinity.c sf_log1p.c sf_nan.c sf_nextafter.c \
-	sf_rint.c sf_logb.c \
-	sf_fdim.c sf_fma.c sf_fmax.c sf_fmin.c sf_lrint.c \
-	sf_lround.c sf_nearbyint.c sf_remquo.c sf_round.c \
-	sf_scalbln.c sf_trunc.c
-
-
-libcommon_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libcommon.la
-@USE_LIBTOOL_TRUE@libcommon_la_SOURCES = @USE_LIBTOOL_TRUE@$(src) $(fsrc)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(src) $(fsrc)
-
-chobj = scbrt.def scopysign.def sexpm1.def silogb.def \
-	sinfinity.def slog1p.def smatherr.def smodf.def \
-	snan.def snextafter.def sscalbn.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(chobj) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  s_finite.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_copysign.$(OBJEXT) s_modf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_scalbn.$(OBJEXT) s_cbrt.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_expm1.$(OBJEXT) s_ilogb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_infinity.$(OBJEXT) s_log1p.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_nan.$(OBJEXT) s_nextafter.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_rint.$(OBJEXT) s_logb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_matherr.$(OBJEXT) s_lib_ver.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_fdim.$(OBJEXT) s_fma.$(OBJEXT) s_fmax.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_fmin.$(OBJEXT) s_fpclassify.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_lrint.$(OBJEXT) s_lround.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_nearbyint.$(OBJEXT) s_remquo.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_round.$(OBJEXT) s_scalbln.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_signbit.$(OBJEXT) s_trunc.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_finite.$(OBJEXT) sf_copysign.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_modf.$(OBJEXT) sf_scalbn.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_cbrt.$(OBJEXT) sf_expm1.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_ilogb.$(OBJEXT) sf_infinity.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_log1p.$(OBJEXT) sf_nan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_nextafter.$(OBJEXT) sf_rint.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_logb.$(OBJEXT) sf_fdim.$(OBJEXT) sf_fma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_fmax.$(OBJEXT) sf_fmin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_lrint.$(OBJEXT) sf_lround.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_nearbyint.$(OBJEXT) sf_remquo.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_round.$(OBJEXT) sf_scalbln.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_trunc.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libcommon_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libcommon_la_OBJECTS =  s_finite.lo s_copysign.lo \
-@USE_LIBTOOL_TRUE@s_modf.lo s_scalbn.lo s_cbrt.lo s_expm1.lo s_ilogb.lo \
-@USE_LIBTOOL_TRUE@s_infinity.lo s_log1p.lo s_nan.lo s_nextafter.lo \
-@USE_LIBTOOL_TRUE@s_rint.lo s_logb.lo s_matherr.lo s_lib_ver.lo \
-@USE_LIBTOOL_TRUE@s_fdim.lo s_fma.lo s_fmax.lo s_fmin.lo \
-@USE_LIBTOOL_TRUE@s_fpclassify.lo s_lrint.lo s_lround.lo s_nearbyint.lo \
-@USE_LIBTOOL_TRUE@s_remquo.lo s_round.lo s_scalbln.lo s_signbit.lo \
-@USE_LIBTOOL_TRUE@s_trunc.lo sf_finite.lo sf_copysign.lo sf_modf.lo \
-@USE_LIBTOOL_TRUE@sf_scalbn.lo sf_cbrt.lo sf_expm1.lo sf_ilogb.lo \
-@USE_LIBTOOL_TRUE@sf_infinity.lo sf_log1p.lo sf_nan.lo sf_nextafter.lo \
-@USE_LIBTOOL_TRUE@sf_rint.lo sf_logb.lo sf_fdim.lo sf_fma.lo sf_fmax.lo \
-@USE_LIBTOOL_TRUE@sf_fmin.lo sf_lrint.lo sf_lround.lo sf_nearbyint.lo \
-@USE_LIBTOOL_TRUE@sf_remquo.lo sf_round.lo sf_scalbln.lo sf_trunc.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libcommon_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libcommon_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus common/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libcommon.la: $(libcommon_la_OBJECTS) $(libcommon_la_DEPENDENCIES)
-	$(LINK)  $(libcommon_la_LDFLAGS) $(libcommon_la_OBJECTS) $(libcommon_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = common
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(chobj)
-	cat $(srcdir)/common.tex >> $(TARGETDOC)
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-smodf.def: s_modf.c
-	$(CHEW) < $(srcdir)/s_modf.c >$@ 2>/dev/null
-	touch stmp-def
-
-scopysign.def: s_copysign.c
-	$(CHEW) < $(srcdir)/s_copysign.c >$@ 2>/dev/null
-	touch stmp-def
-
-sscalbn.def: s_scalbn.c
-	$(CHEW) < $(srcdir)/s_scalbn.c >$@ 2>/dev/null
-	touch stmp-def
-
-scbrt.def: s_cbrt.c
-	$(CHEW) < $(srcdir)/s_cbrt.c >$@ 2>/dev/null
-	touch stmp-def
-
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_serf.c >$@ 2>/dev/null
-	touch stmp-def
-
-sexpn.def: s_expm.c
-	$(CHEW) < $(srcdir)/s_expn.c >$@ 2>/dev/null
-	touch stmp-def
-
-sexpm1.def: s_expm1.c
-	$(CHEW) < $(srcdir)/s_expm1.c >$@ 2>/dev/null
-	touch stmp-def
-
-silogb.def: s_ilogb.c
-	$(CHEW) < $(srcdir)/s_ilogb.c >$@ 2>/dev/null
-	touch stmp-def
-
-sinfinity.def: s_infinity.c
-	$(CHEW) < $(srcdir)/s_infinity.c >$@ 2>/dev/null
-	touch stmp-def
-
-slog1p.def: s_log1p.c
-	$(CHEW) < $(srcdir)/s_log1p.c >$@ 2>/dev/null
-	touch stmp-def
-
-smatherr.def: s_matherr.c
-	$(CHEW) < $(srcdir)/s_matherr.c >$@ 2>/dev/null
-	touch stmp-def
-
-snan.def: s_nan.c
-	$(CHEW) < $(srcdir)/s_nan.c >$@ 2>/dev/null
-	touch stmp-def
-
-snextafter.def: s_nextafter.c
-	$(CHEW) < $(srcdir)/s_nextafter.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h fdlibm.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/common/common.tex b/newlib/libm/common/common.tex
deleted file mode 100644
index 0e8a9863f..000000000
--- a/newlib/libm/common/common.tex
+++ /dev/null
@@ -1,12 +0,0 @@
-@page
-@include common/scbrt.def
-@include common/scopysign.def
-@include common/sexpm1.def
-@include common/silogb.def
-@include common/sinfinity.def
-@include common/slog1p.def
-@include common/smatherr.def
-@include common/smodf.def
-@include common/snan.def
-@include common/snextafter.def
-@include common/sscalbn.def
diff --git a/newlib/libm/common/fdlibm.h b/newlib/libm/common/fdlibm.h
deleted file mode 100644
index 2b1bb79c0..000000000
--- a/newlib/libm/common/fdlibm.h
+++ /dev/null
@@ -1,365 +0,0 @@
-
-/* @(#)fdlibm.h 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* REDHAT LOCAL: Include files.  */
-#include <math.h>
-#include <sys/types.h>
-#include <machine/ieeefp.h>
-
-/* REDHAT LOCAL: Default to XOPEN_MODE.  */
-#define _XOPEN_MODE
-
-/* Most routines need to check whether a float is finite, infinite, or not a
-   number, and many need to know whether the result of an operation will
-   overflow.  These conditions depend on whether the largest exponent is
-   used for NaNs & infinities, or whether it's used for finite numbers.  The
-   macros below wrap up that kind of information:
-
-   FLT_UWORD_IS_FINITE(X)
-	True if a positive float with bitmask X is finite.
-
-   FLT_UWORD_IS_NAN(X)
-	True if a positive float with bitmask X is not a number.
-
-   FLT_UWORD_IS_INFINITE(X)
-	True if a positive float with bitmask X is +infinity.
-
-   FLT_UWORD_MAX
-	The bitmask of FLT_MAX.
-
-   FLT_UWORD_HALF_MAX
-	The bitmask of FLT_MAX/2.
-
-   FLT_UWORD_EXP_MAX
-	The bitmask of the largest finite exponent (129 if the largest
-	exponent is used for finite numbers, 128 otherwise).
-
-   FLT_UWORD_LOG_MAX
-	The bitmask of log(FLT_MAX), rounded down.  This value is the largest
-	input that can be passed to exp() without producing overflow.
-
-   FLT_UWORD_LOG_2MAX
-	The bitmask of log(2*FLT_MAX), rounded down.  This value is the
-	largest input than can be passed to cosh() without producing
-	overflow.
-
-   FLT_LARGEST_EXP
-	The largest biased exponent that can be used for finite numbers
-	(255 if the largest exponent is used for finite numbers, 254
-	otherwise) */
-
-#ifdef _FLT_LARGEST_EXPONENT_IS_NORMAL
-#define FLT_UWORD_IS_FINITE(x) 1
-#define FLT_UWORD_IS_NAN(x) 0
-#define FLT_UWORD_IS_INFINITE(x) 0
-#define FLT_UWORD_MAX 0x7fffffff
-#define FLT_UWORD_EXP_MAX 0x43010000
-#define FLT_UWORD_LOG_MAX 0x42b2d4fc
-#define FLT_UWORD_LOG_2MAX 0x42b437e0
-#define HUGE ((float)0X1.FFFFFEP128)
-#else
-#define FLT_UWORD_IS_FINITE(x) ((x)<0x7f800000L)
-#define FLT_UWORD_IS_NAN(x) ((x)>0x7f800000L)
-#define FLT_UWORD_IS_INFINITE(x) ((x)==0x7f800000L)
-#define FLT_UWORD_MAX 0x7f7fffff
-#define FLT_UWORD_EXP_MAX 0x43000000
-#define FLT_UWORD_LOG_MAX 0x42b17217
-#define FLT_UWORD_LOG_2MAX 0x42b2d4fc
-#define HUGE ((float)3.40282346638528860e+38)
-#endif
-#define FLT_UWORD_HALF_MAX (FLT_UWORD_MAX-(1<<23))
-#define FLT_LARGEST_EXP (FLT_UWORD_MAX>>23)
-
-/* Many routines check for zero and subnormal numbers.  Such things depend
-   on whether the target supports denormals or not:
-
-   FLT_UWORD_IS_ZERO(X)
-	True if a positive float with bitmask X is +0.	Without denormals,
-	any float with a zero exponent is a +0 representation.	With
-	denormals, the only +0 representation is a 0 bitmask.
-
-   FLT_UWORD_IS_SUBNORMAL(X)
-	True if a non-zero positive float with bitmask X is subnormal.
-	(Routines should check for zeros first.)
-
-   FLT_UWORD_MIN
-	The bitmask of the smallest float above +0.  Call this number
-	REAL_FLT_MIN...
-
-   FLT_UWORD_EXP_MIN
-	The bitmask of the float representation of REAL_FLT_MIN's exponent.
-
-   FLT_UWORD_LOG_MIN
-	The bitmask of |log(REAL_FLT_MIN)|, rounding down.
-
-   FLT_SMALLEST_EXP
-	REAL_FLT_MIN's exponent - EXP_BIAS (1 if denormals are not supported,
-	-22 if they are).
-*/
-
-#ifdef _FLT_NO_DENORMALS
-#define FLT_UWORD_IS_ZERO(x) ((x)<0x00800000L)
-#define FLT_UWORD_IS_SUBNORMAL(x) 0
-#define FLT_UWORD_MIN 0x00800000
-#define FLT_UWORD_EXP_MIN 0x42fc0000
-#define FLT_UWORD_LOG_MIN 0x42aeac50
-#define FLT_SMALLEST_EXP 1
-#else
-#define FLT_UWORD_IS_ZERO(x) ((x)==0)
-#define FLT_UWORD_IS_SUBNORMAL(x) ((x)<0x00800000L)
-#define FLT_UWORD_MIN 0x00000001
-#define FLT_UWORD_EXP_MIN 0x43160000
-#define FLT_UWORD_LOG_MIN 0x42cff1b5
-#define FLT_SMALLEST_EXP -22
-#endif
-
-#ifdef __STDC__
-#undef __P
-#define	__P(p)	p
-#else
-#define	__P(p)	()
-#endif
-
-/* 
- * set X_TLOSS = pi*2**52, which is possibly defined in <values.h>
- * (one may replace the following line by "#include <values.h>")
- */
-
-#define X_TLOSS		1.41484755040568800000e+16 
-
-/* Functions that are not documented, and are not in <math.h>.  */
-
-extern double logb __P((double));
-#ifdef _SCALB_INT
-extern double scalb __P((double, int));
-#else
-extern double scalb __P((double, double));
-#endif
-extern double significand __P((double));
-
-/* ieee style elementary functions */
-extern double __ieee754_sqrt __P((double));			
-extern double __ieee754_acos __P((double));			
-extern double __ieee754_acosh __P((double));			
-extern double __ieee754_log __P((double));			
-extern double __ieee754_atanh __P((double));			
-extern double __ieee754_asin __P((double));			
-extern double __ieee754_atan2 __P((double,double));			
-extern double __ieee754_exp __P((double));
-extern double __ieee754_cosh __P((double));
-extern double __ieee754_fmod __P((double,double));
-extern double __ieee754_pow __P((double,double));
-extern double __ieee754_lgamma_r __P((double,int *));
-extern double __ieee754_gamma_r __P((double,int *));
-extern double __ieee754_log10 __P((double));
-extern double __ieee754_sinh __P((double));
-extern double __ieee754_hypot __P((double,double));
-extern double __ieee754_j0 __P((double));
-extern double __ieee754_j1 __P((double));
-extern double __ieee754_y0 __P((double));
-extern double __ieee754_y1 __P((double));
-extern double __ieee754_jn __P((int,double));
-extern double __ieee754_yn __P((int,double));
-extern double __ieee754_remainder __P((double,double));
-extern __int32_t __ieee754_rem_pio2 __P((double,double*));
-#ifdef _SCALB_INT
-extern double __ieee754_scalb __P((double,int));
-#else
-extern double __ieee754_scalb __P((double,double));
-#endif
-
-/* fdlibm kernel function */
-extern double __kernel_standard __P((double,double,int));
-extern double __kernel_sin __P((double,double,int));
-extern double __kernel_cos __P((double,double));
-extern double __kernel_tan __P((double,double,int));
-extern int    __kernel_rem_pio2 __P((double*,double*,int,int,int,const __int32_t*));
-
-/* Undocumented float functions.  */
-extern float logbf __P((float));
-#ifdef _SCALB_INT
-extern float scalbf __P((float, int));
-#else
-extern float scalbf __P((float, float));
-#endif
-extern float significandf __P((float));
-
-/* ieee style elementary float functions */
-extern float __ieee754_sqrtf __P((float));			
-extern float __ieee754_acosf __P((float));			
-extern float __ieee754_acoshf __P((float));			
-extern float __ieee754_logf __P((float));			
-extern float __ieee754_atanhf __P((float));			
-extern float __ieee754_asinf __P((float));			
-extern float __ieee754_atan2f __P((float,float));			
-extern float __ieee754_expf __P((float));
-extern float __ieee754_coshf __P((float));
-extern float __ieee754_fmodf __P((float,float));
-extern float __ieee754_powf __P((float,float));
-extern float __ieee754_lgammaf_r __P((float,int *));
-extern float __ieee754_gammaf_r __P((float,int *));
-extern float __ieee754_log10f __P((float));
-extern float __ieee754_sinhf __P((float));
-extern float __ieee754_hypotf __P((float,float));
-extern float __ieee754_j0f __P((float));
-extern float __ieee754_j1f __P((float));
-extern float __ieee754_y0f __P((float));
-extern float __ieee754_y1f __P((float));
-extern float __ieee754_jnf __P((int,float));
-extern float __ieee754_ynf __P((int,float));
-extern float __ieee754_remainderf __P((float,float));
-extern __int32_t __ieee754_rem_pio2f __P((float,float*));
-#ifdef _SCALB_INT
-extern float __ieee754_scalbf __P((float,int));
-#else
-extern float __ieee754_scalbf __P((float,float));
-#endif
-
-/* float versions of fdlibm kernel functions */
-extern float __kernel_sinf __P((float,float,int));
-extern float __kernel_cosf __P((float,float));
-extern float __kernel_tanf __P((float,float,int));
-extern int   __kernel_rem_pio2f __P((float*,float*,int,int,int,const __int32_t*));
-
-/* The original code used statements like
-	n0 = ((*(int*)&one)>>29)^1;		* index of high word *
-	ix0 = *(n0+(int*)&x);			* high word of x *
-	ix1 = *((1-n0)+(int*)&x);		* low word of x *
-   to dig two 32 bit words out of the 64 bit IEEE floating point
-   value.  That is non-ANSI, and, moreover, the gcc instruction
-   scheduler gets it wrong.  We instead use the following macros.
-   Unlike the original code, we determine the endianness at compile
-   time, not at run time; I don't see much benefit to selecting
-   endianness at run time.  */
-
-#ifndef __IEEE_BIG_ENDIAN
-#ifndef __IEEE_LITTLE_ENDIAN
- #error Must define endianness
-#endif
-#endif
-
-/* A union which permits us to convert between a double and two 32 bit
-   ints.  */
-
-#ifdef __IEEE_BIG_ENDIAN
-
-typedef union 
-{
-  double value;
-  struct 
-  {
-    __uint32_t msw;
-    __uint32_t lsw;
-  } parts;
-} ieee_double_shape_type;
-
-#endif
-
-#ifdef __IEEE_LITTLE_ENDIAN
-
-typedef union 
-{
-  double value;
-  struct 
-  {
-    __uint32_t lsw;
-    __uint32_t msw;
-  } parts;
-} ieee_double_shape_type;
-
-#endif
-
-/* Get two 32 bit ints from a double.  */
-
-#define EXTRACT_WORDS(ix0,ix1,d)				\
-do {								\
-  ieee_double_shape_type ew_u;					\
-  ew_u.value = (d);						\
-  (ix0) = ew_u.parts.msw;					\
-  (ix1) = ew_u.parts.lsw;					\
-} while (0)
-
-/* Get the more significant 32 bit int from a double.  */
-
-#define GET_HIGH_WORD(i,d)					\
-do {								\
-  ieee_double_shape_type gh_u;					\
-  gh_u.value = (d);						\
-  (i) = gh_u.parts.msw;						\
-} while (0)
-
-/* Get the less significant 32 bit int from a double.  */
-
-#define GET_LOW_WORD(i,d)					\
-do {								\
-  ieee_double_shape_type gl_u;					\
-  gl_u.value = (d);						\
-  (i) = gl_u.parts.lsw;						\
-} while (0)
-
-/* Set a double from two 32 bit ints.  */
-
-#define INSERT_WORDS(d,ix0,ix1)					\
-do {								\
-  ieee_double_shape_type iw_u;					\
-  iw_u.parts.msw = (ix0);					\
-  iw_u.parts.lsw = (ix1);					\
-  (d) = iw_u.value;						\
-} while (0)
-
-/* Set the more significant 32 bits of a double from an int.  */
-
-#define SET_HIGH_WORD(d,v)					\
-do {								\
-  ieee_double_shape_type sh_u;					\
-  sh_u.value = (d);						\
-  sh_u.parts.msw = (v);						\
-  (d) = sh_u.value;						\
-} while (0)
-
-/* Set the less significant 32 bits of a double from an int.  */
-
-#define SET_LOW_WORD(d,v)					\
-do {								\
-  ieee_double_shape_type sl_u;					\
-  sl_u.value = (d);						\
-  sl_u.parts.lsw = (v);						\
-  (d) = sl_u.value;						\
-} while (0)
-
-/* A union which permits us to convert between a float and a 32 bit
-   int.  */
-
-typedef union
-{
-  float value;
-  __uint32_t word;
-} ieee_float_shape_type;
-
-/* Get a 32 bit int from a float.  */
-
-#define GET_FLOAT_WORD(i,d)					\
-do {								\
-  ieee_float_shape_type gf_u;					\
-  gf_u.value = (d);						\
-  (i) = gf_u.word;						\
-} while (0)
-
-/* Set a float from a 32 bit int.  */
-
-#define SET_FLOAT_WORD(d,i)					\
-do {								\
-  ieee_float_shape_type sf_u;					\
-  sf_u.word = (i);						\
-  (d) = sf_u.value;						\
-} while (0)
diff --git a/newlib/libm/common/s_cbrt.c b/newlib/libm/common/s_cbrt.c
deleted file mode 100644
index 95185d0fa..000000000
--- a/newlib/libm/common/s_cbrt.c
+++ /dev/null
@@ -1,123 +0,0 @@
-
-/* @(#)s_cbrt.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-	<<cbrt>>, <<cbrtf>>---cube root
-
-INDEX
-	cbrt
-INDEX
-	cbrtf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double cbrt(double <[x]>);
-	float  cbrtf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double cbrt(<[x]>);
-	float  cbrtf(<[x]>);
-
-DESCRIPTION
-	<<cbrt>> computes the cube root of the argument.
-
-RETURNS
-	The cube root is returned. 
-
-PORTABILITY
-	<<cbrt>> is in System V release 4.  <<cbrtf>> is an extension.
-*/
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-/* cbrt(x)
- * Return cube root of x
- */
-#ifdef __STDC__
-static const __uint32_t 
-#else
-static __uint32_t 
-#endif
-	B1 = 715094163, /* B1 = (682-0.03306235651)*2**20 */
-	B2 = 696219795; /* B2 = (664-0.03306235651)*2**20 */
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-C =  5.42857142857142815906e-01, /* 19/35     = 0x3FE15F15, 0xF15F15F1 */
-D = -7.05306122448979611050e-01, /* -864/1225 = 0xBFE691DE, 0x2532C834 */
-E =  1.41428571428571436819e+00, /* 99/70     = 0x3FF6A0EA, 0x0EA0EA0F */
-F =  1.60714285714285720630e+00, /* 45/28     = 0x3FF9B6DB, 0x6DB6DB6E */
-G =  3.57142857142857150787e-01; /* 5/14      = 0x3FD6DB6D, 0xB6DB6DB7 */
-
-#ifdef __STDC__
-	double cbrt(double x) 
-#else
-	double cbrt(x) 
-	double x;
-#endif
-{
-	__int32_t	hx;
-	double r,s,t=0.0,w;
-	__uint32_t sign;
-	__uint32_t high,low;
-
-	GET_HIGH_WORD(hx,x);
-	sign=hx&0x80000000; 		/* sign= sign(x) */
-	hx  ^=sign;
-	if(hx>=0x7ff00000) return(x+x); /* cbrt(NaN,INF) is itself */
-	GET_LOW_WORD(low,x);
-	if((hx|low)==0) 
-	    return(x);		/* cbrt(0) is itself */
-
-	SET_HIGH_WORD(x,hx);	/* x <- |x| */
-    /* rough cbrt to 5 bits */
-	if(hx<0x00100000) 		/* subnormal number */
-	  {SET_HIGH_WORD(t,0x43500000);	/* set t= 2**54 */
-	   t*=x; GET_HIGH_WORD(high,t); SET_HIGH_WORD(t,high/3+B2);
-	  }
-	else
-	  SET_HIGH_WORD(t,hx/3+B1);
-
-
-    /* new cbrt to 23 bits, may be implemented in single precision */
-	r=t*t/x;
-	s=C+r*t;
-	t*=G+F/(s+E+D/s);	
-
-    /* chopped to 20 bits and make it larger than cbrt(x) */ 
-	GET_HIGH_WORD(high,t);
-	INSERT_WORDS(t,high+0x00000001,0);
-
-
-    /* one step newton iteration to 53 bits with error less than 0.667 ulps */
-	s=t*t;		/* t*t is exact */
-	r=x/s;
-	w=t+t;
-	r=(r-t)/(w+r);	/* r-s is exact */
-	t=t+t*r;
-
-    /* retore the sign bit */
-	GET_HIGH_WORD(high,t);
-	SET_HIGH_WORD(t,high|sign);
-	return(t);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_copysign.c b/newlib/libm/common/s_copysign.c
deleted file mode 100644
index bfc546db5..000000000
--- a/newlib/libm/common/s_copysign.c
+++ /dev/null
@@ -1,82 +0,0 @@
-
-/* @(#)s_copysign.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<copysign>>, <<copysignf>>---sign of <[y]>, magnitude of <[x]>
-
-INDEX
-	copysign
-INDEX
-	copysignf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double copysign (double <[x]>, double <[y]>);
-	float copysignf (float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double copysign (<[x]>, <[y]>)
-	double <[x]>;
-	double <[y]>;
-
-	float copysignf (<[x]>, <[y]>)
-	float <[x]>;
-	float <[y]>;
-
-DESCRIPTION
-<<copysign>> constructs a number with the magnitude (absolute value)
-of its first argument, <[x]>, and the sign of its second argument,
-<[y]>.
-
-<<copysignf>> does the same thing; the two functions differ only in
-the type of their arguments and result.
-
-RETURNS
-<<copysign>> returns a <<double>> with the magnitude of
-<[x]> and the sign of <[y]>.
-<<copysignf>> returns a <<float>> with the magnitude of
-<[x]> and the sign of <[y]>.
-
-PORTABILITY
-<<copysign>> is not required by either ANSI C or the System V Interface
-Definition (Issue 2).
-
-*/
-
-/*
- * copysign(double x, double y)
- * copysign(x,y) returns a value with the magnitude of x and
- * with the sign bit of y.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double copysign(double x, double y)
-#else
-	double copysign(x,y)
-	double x,y;
-#endif
-{
-	__uint32_t hx,hy;
-	GET_HIGH_WORD(hx,x);
-	GET_HIGH_WORD(hy,y);
-	SET_HIGH_WORD(x,(hx&0x7fffffff)|(hy&0x80000000));
-        return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_expm1.c b/newlib/libm/common/s_expm1.c
deleted file mode 100644
index 12c88f16b..000000000
--- a/newlib/libm/common/s_expm1.c
+++ /dev/null
@@ -1,272 +0,0 @@
-
-/* @(#)s_expm1.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<expm1>>, <<expm1f>>---exponential minus 1
-INDEX
-	expm1
-INDEX
-	expm1f
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double expm1(double <[x]>);
-	float expm1f(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double expm1(<[x]>);
-	double <[x]>;
-
-	float expm1f(<[x]>);
-	float <[x]>;
-
-DESCRIPTION
-	<<expm1>> and <<expm1f>> calculate the exponential of <[x]>
-	and subtract 1, that is,
-	@ifnottex
-	e raised to the power <[x]> minus 1 (where e
-	@end ifnottex
-	@tex
-	$e^x - 1$ (where $e$
-	@end tex
-	is the base of the natural system of logarithms, approximately
-	2.71828).  The result is accurate even for small values of
-	<[x]>, where using <<exp(<[x]>)-1>> would lose many
-	significant digits.
-
-RETURNS
-	e raised to the power <[x]>, minus 1.
-
-PORTABILITY
-	Neither <<expm1>> nor <<expm1f>> is required by ANSI C or by
-	the System V Interface Definition (Issue 2).
-*/
-
-/* expm1(x)
- * Returns exp(x)-1, the exponential of x minus 1.
- *
- * Method
- *   1. Argument reduction:
- *	Given x, find r and integer k such that
- *
- *               x = k*ln2 + r,  |r| <= 0.5*ln2 ~ 0.34658  
- *
- *      Here a correction term c will be computed to compensate 
- *	the error in r when rounded to a floating-point number.
- *
- *   2. Approximating expm1(r) by a special rational function on
- *	the interval [0,0.34658]:
- *	Since
- *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 - r^4/360 + ...
- *	we define R1(r*r) by
- *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 * R1(r*r)
- *	That is,
- *	    R1(r**2) = 6/r *((exp(r)+1)/(exp(r)-1) - 2/r)
- *		     = 6/r * ( 1 + 2.0*(1/(exp(r)-1) - 1/r))
- *		     = 1 - r^2/60 + r^4/2520 - r^6/100800 + ...
- *      We use a special Reme algorithm on [0,0.347] to generate 
- * 	a polynomial of degree 5 in r*r to approximate R1. The 
- *	maximum error of this polynomial approximation is bounded 
- *	by 2**-61. In other words,
- *	    R1(z) ~ 1.0 + Q1*z + Q2*z**2 + Q3*z**3 + Q4*z**4 + Q5*z**5
- *	where 	Q1  =  -1.6666666666666567384E-2,
- * 		Q2  =   3.9682539681370365873E-4,
- * 		Q3  =  -9.9206344733435987357E-6,
- * 		Q4  =   2.5051361420808517002E-7,
- * 		Q5  =  -6.2843505682382617102E-9;
- *  	(where z=r*r, and the values of Q1 to Q5 are listed below)
- *	with error bounded by
- *	    |                  5           |     -61
- *	    | 1.0+Q1*z+...+Q5*z   -  R1(z) | <= 2 
- *	    |                              |
- *	
- *	expm1(r) = exp(r)-1 is then computed by the following 
- * 	specific way which minimize the accumulation rounding error: 
- *			       2     3
- *			      r     r    [ 3 - (R1 + R1*r/2)  ]
- *	      expm1(r) = r + --- + --- * [--------------------]
- *		              2     2    [ 6 - r*(3 - R1*r/2) ]
- *	
- *	To compensate the error in the argument reduction, we use
- *		expm1(r+c) = expm1(r) + c + expm1(r)*c 
- *			   ~ expm1(r) + c + r*c 
- *	Thus c+r*c will be added in as the correction terms for
- *	expm1(r+c). Now rearrange the term to avoid optimization 
- * 	screw up:
- *		        (      2                                    2 )
- *		        ({  ( r    [ R1 -  (3 - R1*r/2) ]  )  }    r  )
- *	 expm1(r+c)~r - ({r*(--- * [--------------------]-c)-c} - --- )
- *	                ({  ( 2    [ 6 - r*(3 - R1*r/2) ]  )  }    2  )
- *                      (                                             )
- *    	
- *		   = r - E
- *   3. Scale back to obtain expm1(x):
- *	From step 1, we have
- *	   expm1(x) = either 2^k*[expm1(r)+1] - 1
- *		    = or     2^k*[expm1(r) + (1-2^-k)]
- *   4. Implementation notes:
- *	(A). To save one multiplication, we scale the coefficient Qi
- *	     to Qi*2^i, and replace z by (x^2)/2.
- *	(B). To achieve maximum accuracy, we compute expm1(x) by
- *	  (i)   if x < -56*ln2, return -1.0, (raise inexact if x!=inf)
- *	  (ii)  if k=0, return r-E
- *	  (iii) if k=-1, return 0.5*(r-E)-0.5
- *        (iv)	if k=1 if r < -0.25, return 2*((r+0.5)- E)
- *	       	       else	     return  1.0+2.0*(r-E);
- *	  (v)   if (k<-2||k>56) return 2^k(1-(E-r)) - 1 (or exp(x)-1)
- *	  (vi)  if k <= 20, return 2^k((1-2^-k)-(E-r)), else
- *	  (vii) return 2^k(1-((E+2^-k)-r)) 
- *
- * Special cases:
- *	expm1(INF) is INF, expm1(NaN) is NaN;
- *	expm1(-INF) is -1, and
- *	for finite argument, only expm1(0)=0 is exact.
- *
- * Accuracy:
- *	according to an error analysis, the error is always less than
- *	1 ulp (unit in the last place).
- *
- * Misc. info.
- *	For IEEE double 
- *	    if x >  7.09782712893383973096e+02 then expm1(x) overflow
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-one		= 1.0,
-huge		= 1.0e+300,
-tiny		= 1.0e-300,
-o_threshold	= 7.09782712893383973096e+02,/* 0x40862E42, 0xFEFA39EF */
-ln2_hi		= 6.93147180369123816490e-01,/* 0x3fe62e42, 0xfee00000 */
-ln2_lo		= 1.90821492927058770002e-10,/* 0x3dea39ef, 0x35793c76 */
-invln2		= 1.44269504088896338700e+00,/* 0x3ff71547, 0x652b82fe */
-	/* scaled coefficients related to expm1 */
-Q1  =  -3.33333333333331316428e-02, /* BFA11111 111110F4 */
-Q2  =   1.58730158725481460165e-03, /* 3F5A01A0 19FE5585 */
-Q3  =  -7.93650757867487942473e-05, /* BF14CE19 9EAADBB7 */
-Q4  =   4.00821782732936239552e-06, /* 3ED0CFCA 86E65239 */
-Q5  =  -2.01099218183624371326e-07; /* BE8AFDB7 6E09C32D */
-
-#ifdef __STDC__
-	double expm1(double x)
-#else
-	double expm1(x)
-	double x;
-#endif
-{
-	double y,hi,lo,c,t,e,hxs,hfx,r1;
-	__int32_t k,xsb;
-	__uint32_t hx;
-
-	GET_HIGH_WORD(hx,x);
-	xsb = hx&0x80000000;		/* sign bit of x */
-	if(xsb==0) y=x; else y= -x;	/* y = |x| */
-	hx &= 0x7fffffff;		/* high word of |x| */
-
-    /* filter out huge and non-finite argument */
-	if(hx >= 0x4043687A) {			/* if |x|>=56*ln2 */
-	    if(hx >= 0x40862E42) {		/* if |x|>=709.78... */
-                if(hx>=0x7ff00000) {
-		    __uint32_t low;
-		    GET_LOW_WORD(low,x);
-		    if(((hx&0xfffff)|low)!=0) 
-		         return x+x; 	 /* NaN */
-		    else return (xsb==0)? x:-1.0;/* exp(+-inf)={inf,-1} */
-	        }
-	        if(x > o_threshold) return huge*huge; /* overflow */
-	    }
-	    if(xsb!=0) { /* x < -56*ln2, return -1.0 with inexact */
-		if(x+tiny<0.0)		/* raise inexact */
-		return tiny-one;	/* return -1 */
-	    }
-	}
-
-    /* argument reduction */
-	if(hx > 0x3fd62e42) {		/* if  |x| > 0.5 ln2 */ 
-	    if(hx < 0x3FF0A2B2) {	/* and |x| < 1.5 ln2 */
-		if(xsb==0)
-		    {hi = x - ln2_hi; lo =  ln2_lo;  k =  1;}
-		else
-		    {hi = x + ln2_hi; lo = -ln2_lo;  k = -1;}
-	    } else {
-		k  = invln2*x+((xsb==0)?0.5:-0.5);
-		t  = k;
-		hi = x - t*ln2_hi;	/* t*ln2_hi is exact here */
-		lo = t*ln2_lo;
-	    }
-	    x  = hi - lo;
-	    c  = (hi-x)-lo;
-	} 
-	else if(hx < 0x3c900000) {  	/* when |x|<2**-54, return x */
-	    t = huge+x;	/* return x with inexact flags when x!=0 */
-	    return x - (t-(huge+x));	
-	}
-	else k = 0;
-
-    /* x is now in primary range */
-	hfx = 0.5*x;
-	hxs = x*hfx;
-	r1 = one+hxs*(Q1+hxs*(Q2+hxs*(Q3+hxs*(Q4+hxs*Q5))));
-	t  = 3.0-r1*hfx;
-	e  = hxs*((r1-t)/(6.0 - x*t));
-	if(k==0) return x - (x*e-hxs);		/* c is 0 */
-	else {
-	    e  = (x*(e-c)-c);
-	    e -= hxs;
-	    if(k== -1) return 0.5*(x-e)-0.5;
-          if(k==1) {
-	       	if(x < -0.25) return -2.0*(e-(x+0.5));
-	       	else 	      return  one+2.0*(x-e);
-          }
-	    if (k <= -2 || k>56) {   /* suffice to return exp(x)-1 */
-	        __uint32_t high;
-	        y = one-(e-x);
-		GET_HIGH_WORD(high,y);
-		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
-	        return y-one;
-	    }
-	    t = one;
-	    if(k<20) {
-	        __uint32_t high;
-	        SET_HIGH_WORD(t,0x3ff00000 - (0x200000>>k));  /* t=1-2^-k */
-	       	y = t-(e-x);
-		GET_HIGH_WORD(high,y);
-		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
-	   } else {
-	        __uint32_t high;
-		SET_HIGH_WORD(t,((0x3ff-k)<<20));	/* 2^-k */
-	       	y = x-(e+t);
-	       	y += one;
-		GET_HIGH_WORD(high,y);
-		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
-	    }
-	}
-	return y;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_fdim.c b/newlib/libm/common/s_fdim.c
deleted file mode 100644
index 0010bf59d..000000000
--- a/newlib/libm/common/s_fdim.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fdim(double x, double y)
-#else
-	double fdim(x,y)
-	double x;
-	double y;
-#endif
-{
-  int c = __fpclassifyd(x);
-  if (c == FP_NAN || c == FP_INFINITE)
-    return HUGE_VAL;
-
-  return x > y ? x - y : 0.0;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_finite.c b/newlib/libm/common/s_finite.c
deleted file mode 100644
index 17f4e849b..000000000
--- a/newlib/libm/common/s_finite.c
+++ /dev/null
@@ -1,35 +0,0 @@
-
-/* @(#)s_finite.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * finite(x) returns 1 is x is finite, else 0;
- * no branching!
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int finite(double x)
-#else
-	int finite(x)
-	double x;
-#endif
-{
-	__int32_t hx;
-	GET_HIGH_WORD(hx,x);
-	return  (int)((__uint32_t)((hx&0x7fffffff)-0x7ff00000)>>31);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_fma.c b/newlib/libm/common/s_fma.c
deleted file mode 100644
index 86958afcb..000000000
--- a/newlib/libm/common/s_fma.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fma(double x, double y, double z)
-#else
-	double fma(x,y)
-	double x;
-	double y;
-        double z;
-#endif
-{
-  /* Implementation defined. */
-  return (x * y) + z;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_fmax.c b/newlib/libm/common/s_fmax.c
deleted file mode 100644
index 2de04efab..000000000
--- a/newlib/libm/common/s_fmax.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmax(double x, double y)
-#else
-	double fmax(x,y)
-	double x;
-	double y;
-#endif
-{
-  if (__fpclassifyd(x) == FP_NAN)
-    return x;
-  if (__fpclassifyd(y) == FP_NAN)
-    return y;
-  
-  return x > y ? x : y;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_fmin.c b/newlib/libm/common/s_fmin.c
deleted file mode 100644
index f9eb51cdd..000000000
--- a/newlib/libm/common/s_fmin.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmin(double x, double y)
-#else
-	double fmin(x,y)
-	double x;
-	double y;
-#endif
-{
-  if (__fpclassifyd(x) == FP_NAN)
-    return x;
-  if (__fpclassifyd(y) == FP_NAN)
-    return y;
-  
-  return x < y ? x : y;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_fpclassify.c b/newlib/libm/common/s_fpclassify.c
deleted file mode 100644
index 2820f0373..000000000
--- a/newlib/libm/common/s_fpclassify.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-int
-__fpclassifyf (float x)
-{
-  unsigned int w;
-
-  GET_FLOAT_WORD(w,x);
-  
-  if (w == 0x00000000 || w == 0x80000000)
-    return FP_ZERO;
-  else if ((w >= 0x00800000 && w <= 0x7f7fffff) ||
-           (w >= 0x80800000 && w <= 0xff7fffff))
-    return FP_NORMAL;
-  else if ((w >= 0x00000001 && w <= 0x007fffff) ||
-           (w >= 0x80000001 && w <= 0x807fffff))
-    return FP_SUBNORMAL;
-  else if (w == 0x7f800000 || w == 0xff800000)
-    return FP_INFINITE;
-  else
-    return FP_NAN;
-}
-
-int
-__fpclassifyd (double x)
-{
-  unsigned int msw, lsw;
-
-  EXTRACT_WORDS(msw,lsw,x);
-
-  if ((msw == 0x00000000 && lsw == 0x00000000) ||
-      (msw == 0x80000000 && lsw == 0x00000000))
-    return FP_ZERO;
-  else if ((msw >= 0x00100000 && msw <= 0x7fefffff) ||
-           (msw >= 0x80100000 && msw <= 0xffefffff))
-    return FP_NORMAL;
-  else if ((msw >= 0x00000000 && msw <= 0x000fffff) ||
-           (msw >= 0x80000000 && msw <= 0x800fffff))
-    /* zero is already handled above */
-    return FP_SUBNORMAL;
-  else if ((msw == 0x7ff00000 && lsw == 0x00000000) ||
-           (msw == 0xfff00000 && lsw == 0x00000000))
-    return FP_INFINITE;
-  else
-    return FP_NAN;
-}
diff --git a/newlib/libm/common/s_ilogb.c b/newlib/libm/common/s_ilogb.c
deleted file mode 100644
index 00dfef633..000000000
--- a/newlib/libm/common/s_ilogb.c
+++ /dev/null
@@ -1,92 +0,0 @@
-
-/* @(#)s_ilogb.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<ilogb>>, <<ilogbf>>---get exponent of floating-point number
-INDEX
-	ilogb
-INDEX
-	ilogbf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-        int ilogb(double <[val]>);
-        int ilogbf(float <[val]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-        int ilogb(<[val]>)
-        double <[val]>;
-
-        int ilogbf(<[val]>)
-        float <[val]>;
-
-
-DESCRIPTION
-
-	All nonzero, normal numbers can be described as <[m]> *
-	2**<[p]>.  <<ilogb>> and <<ilogbf>> examine the argument
-	<[val]>, and return <[p]>.  The functions <<frexp>> and
-	<<frexpf>> are similar to <<ilogb>> and <<ilogbf>>, but also
-	return <[m]>.
-
-RETURNS
-
-<<ilogb>> and <<ilogbf>> return the power of two used to form the
-floating-point argument.  If <[val]> is <<0>>, they return <<-
-INT_MAX>> (<<INT_MAX>> is defined in limits.h).  If <[val]> is
-infinite, or NaN, they return <<INT_MAX>>.
-
-PORTABILITY
-	Neither <<ilogb>> nor <<ilogbf>> is required by ANSI C or by
-	the System V Interface Definition (Issue 2).  */
-
-/* ilogb(double x)
- * return the binary exponent of non-zero x
- * ilogb(0) = 0x80000001
- * ilogb(inf/NaN) = 0x7fffffff (no signal is raised)
- */
-
-#include "fdlibm.h"
-#include <limits.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int ilogb(double x)
-#else
-	int ilogb(x)
-	double x;
-#endif
-{
-	__int32_t hx,lx,ix;
-
-	EXTRACT_WORDS(hx,lx,x);
-	hx &= 0x7fffffff;
-	if(hx<0x00100000) {
-	    if((hx|lx)==0) 
-		return - INT_MAX;	/* ilogb(0) = 0x80000001 */
-	    else			/* subnormal x */
-		if(hx==0) {
-		    for (ix = -1043; lx>0; lx<<=1) ix -=1;
-		} else {
-		    for (ix = -1022,hx<<=11; hx>0; hx<<=1) ix -=1;
-		}
-	    return ix;
-	}
-	else if (hx<0x7ff00000) return (hx>>20)-1023;
-	else return INT_MAX;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_infinity.c b/newlib/libm/common/s_infinity.c
deleted file mode 100644
index 9f9cbebee..000000000
--- a/newlib/libm/common/s_infinity.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * infinity () returns the representation of infinity.
- * Added by Cygnus Support.
- */
-
-/*
-FUNCTION
-	<<infinity>>, <<infinityf>>---representation of infinity
-
-INDEX
-	infinity
-INDEX
-	infinityf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double infinity(void);
-	float infinityf(void);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double infinity();
-	float infinityf();
-
-
-DESCRIPTION
-	<<infinity>> and <<infinityf>> return the special number IEEE
-	infinity in double- and single-precision arithmetic
-	respectively.
-
-QUICKREF
-	infinity - pure
-
-*/
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-	double infinity()
-{
-	double x;
-
-	INSERT_WORDS(x,0x7ff00000,0);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_lib_ver.c b/newlib/libm/common/s_lib_ver.c
deleted file mode 100644
index d42f62404..000000000
--- a/newlib/libm/common/s_lib_ver.c
+++ /dev/null
@@ -1,35 +0,0 @@
-
-/* @(#)s_lib_ver.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * MACRO for standards
- */
-
-#include "fdlibm.h"
-
-/*
- * define and initialize _LIB_VERSION
- */
-#ifdef _POSIX_MODE
-_CONST _LIB_VERSION_TYPE _LIB_VERSION = _POSIX_;
-#else
-#ifdef _XOPEN_MODE
-_CONST _LIB_VERSION_TYPE _LIB_VERSION = _XOPEN_;
-#else
-#ifdef _SVID3_MODE
-_CONST _LIB_VERSION_TYPE _LIB_VERSION = _SVID_;
-#else					/* default _IEEE_MODE */
-_CONST _LIB_VERSION_TYPE _LIB_VERSION = _IEEE_;
-#endif
-#endif
-#endif
diff --git a/newlib/libm/common/s_log1p.c b/newlib/libm/common/s_log1p.c
deleted file mode 100644
index 351c887e7..000000000
--- a/newlib/libm/common/s_log1p.c
+++ /dev/null
@@ -1,217 +0,0 @@
-
-/* @(#)s_log1p.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<log1p>>, <<log1pf>>---log of <<1 + <[x]>>>
-
-INDEX
-	log1p
-INDEX
-	log1pf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double log1p(double <[x]>);
-	float log1pf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double log1p(<[x]>)
-	double <[x]>;
-
-	float log1pf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-<<log1p>> calculates 
-@tex
-$ln(1+x)$, 
-@end tex
-the natural logarithm of <<1+<[x]>>>.  You can use <<log1p>> rather
-than `<<log(1+<[x]>)>>' for greater precision when <[x]> is very
-small.
-
-<<log1pf>> calculates the same thing, but accepts and returns
-<<float>> values rather than <<double>>.
-
-RETURNS
-<<log1p>> returns a <<double>>, the natural log of <<1+<[x]>>>.
-<<log1pf>> returns a <<float>>, the natural log of <<1+<[x]>>>.
-
-PORTABILITY
-Neither <<log1p>> nor <<log1pf>> is required by ANSI C or by the System V
-Interface Definition (Issue 2).
-
-*/
-
-/* double log1p(double x)
- *
- * Method :                  
- *   1. Argument Reduction: find k and f such that 
- *			1+x = 2^k * (1+f), 
- *	   where  sqrt(2)/2 < 1+f < sqrt(2) .
- *
- *      Note. If k=0, then f=x is exact. However, if k!=0, then f
- *	may not be representable exactly. In that case, a correction
- *	term is need. Let u=1+x rounded. Let c = (1+x)-u, then
- *	log(1+x) - log(u) ~ c/u. Thus, we proceed to compute log(u),
- *	and add back the correction term c/u.
- *	(Note: when x > 2**53, one can simply return log(x))
- *
- *   2. Approximation of log1p(f).
- *	Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
- *		 = 2s + 2/3 s**3 + 2/5 s**5 + .....,
- *	     	 = 2s + s*R
- *      We use a special Reme algorithm on [0,0.1716] to generate 
- * 	a polynomial of degree 14 to approximate R The maximum error 
- *	of this polynomial approximation is bounded by 2**-58.45. In
- *	other words,
- *		        2      4      6      8      10      12      14
- *	    R(z) ~ Lp1*s +Lp2*s +Lp3*s +Lp4*s +Lp5*s  +Lp6*s  +Lp7*s
- *  	(the values of Lp1 to Lp7 are listed in the program)
- *	and
- *	    |      2          14          |     -58.45
- *	    | Lp1*s +...+Lp7*s    -  R(z) | <= 2 
- *	    |                             |
- *	Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
- *	In order to guarantee error in log below 1ulp, we compute log
- *	by
- *		log1p(f) = f - (hfsq - s*(hfsq+R)).
- *	
- *	3. Finally, log1p(x) = k*ln2 + log1p(f).  
- *		 	     = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
- *	   Here ln2 is split into two floating point number: 
- *			ln2_hi + ln2_lo,
- *	   where n*ln2_hi is always exact for |n| < 2000.
- *
- * Special cases:
- *	log1p(x) is NaN with signal if x < -1 (including -INF) ; 
- *	log1p(+INF) is +INF; log1p(-1) is -INF with signal;
- *	log1p(NaN) is that NaN with no signal.
- *
- * Accuracy:
- *	according to an error analysis, the error is always less than
- *	1 ulp (unit in the last place).
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- *
- * Note: Assuming log() return accurate answer, the following
- * 	 algorithm can be used to compute log1p(x) to within a few ULP:
- *	
- *		u = 1+x;
- *		if(u==1.0) return x ; else
- *			   return log(u)*(x/(u-1.0));
- *
- *	 See HP-15C Advanced Functions Handbook, p.193.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-ln2_hi  =  6.93147180369123816490e-01,	/* 3fe62e42 fee00000 */
-ln2_lo  =  1.90821492927058770002e-10,	/* 3dea39ef 35793c76 */
-two54   =  1.80143985094819840000e+16,  /* 43500000 00000000 */
-Lp1 = 6.666666666666735130e-01,  /* 3FE55555 55555593 */
-Lp2 = 3.999999999940941908e-01,  /* 3FD99999 9997FA04 */
-Lp3 = 2.857142874366239149e-01,  /* 3FD24924 94229359 */
-Lp4 = 2.222219843214978396e-01,  /* 3FCC71C5 1D8E78AF */
-Lp5 = 1.818357216161805012e-01,  /* 3FC74664 96CB03DE */
-Lp6 = 1.531383769920937332e-01,  /* 3FC39A09 D078C69F */
-Lp7 = 1.479819860511658591e-01;  /* 3FC2F112 DF3E5244 */
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	double log1p(double x)
-#else
-	double log1p(x)
-	double x;
-#endif
-{
-	double hfsq,f,c,s,z,R,u;
-	__int32_t k,hx,hu,ax;
-
-	GET_HIGH_WORD(hx,x);
-	ax = hx&0x7fffffff;
-
-	k = 1;
-	if (hx < 0x3FDA827A) {			/* x < 0.41422  */
-	    if(ax>=0x3ff00000) {		/* x <= -1.0 */
-		if(x==-1.0) return -two54/zero; /* log1p(-1)=+inf */
-		else return (x-x)/(x-x);	/* log1p(x<-1)=NaN */
-	    }
-	    if(ax<0x3e200000) {			/* |x| < 2**-29 */
-		if(two54+x>zero			/* raise inexact */
-	            &&ax<0x3c900000) 		/* |x| < 2**-54 */
-		    return x;
-		else
-		    return x - x*x*0.5;
-	    }
-	    if(hx>0||hx<=((__int32_t)0xbfd2bec3)) {
-		k=0;f=x;hu=1;}	/* -0.2929<x<0.41422 */
-	} 
-	if (hx >= 0x7ff00000) return x+x;
-	if(k!=0) {
-	    if(hx<0x43400000) {
-		u  = 1.0+x; 
-		GET_HIGH_WORD(hu,u);
-	        k  = (hu>>20)-1023;
-	        c  = (k>0)? 1.0-(u-x):x-(u-1.0);/* correction term */
-		c /= u;
-	    } else {
-		u  = x;
-		GET_HIGH_WORD(hu,u);
-	        k  = (hu>>20)-1023;
-		c  = 0;
-	    }
-	    hu &= 0x000fffff;
-	    if(hu<0x6a09e) {
-	        SET_HIGH_WORD(u,hu|0x3ff00000);	/* normalize u */
-	    } else {
-	        k += 1; 
-		SET_HIGH_WORD(u,hu|0x3fe00000);	/* normalize u/2 */
-	        hu = (0x00100000-hu)>>2;
-	    }
-	    f = u-1.0;
-	}
-	hfsq=0.5*f*f;
-	if(hu==0) {	/* |f| < 2**-20 */
-          if(f==zero) { if(k==0) return zero;  
-                      else {c += k*ln2_lo; return k*ln2_hi+c;}}
-	    R = hfsq*(1.0-0.66666666666666666*f);
-	    if(k==0) return f-R; else
-	    	     return k*ln2_hi-((R-(k*ln2_lo+c))-f);
-	}
- 	s = f/(2.0+f); 
-	z = s*s;
-	R = z*(Lp1+z*(Lp2+z*(Lp3+z*(Lp4+z*(Lp5+z*(Lp6+z*Lp7))))));
-	if(k==0) return f-(hfsq-s*(hfsq+R)); else
-		 return k*ln2_hi-((hfsq-(s*(hfsq+R)+(k*ln2_lo+c)))-f);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_logb.c b/newlib/libm/common/s_logb.c
deleted file mode 100644
index dbddd1994..000000000
--- a/newlib/libm/common/s_logb.c
+++ /dev/null
@@ -1,42 +0,0 @@
-
-/* @(#)s_logb.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * double logb(x)
- * IEEE 754 logb. Included to pass IEEE test suite. Not recommend.
- * Use ilogb instead.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double logb(double x)
-#else
-	double logb(x)
-	double x;
-#endif
-{
-	__int32_t lx,ix;
-	EXTRACT_WORDS(ix,lx,x);
-	ix &= 0x7fffffff;			/* high |x| */
-	if((ix|lx)==0) return -1.0/fabs(x);
-	if(ix>=0x7ff00000) return x*x;
-	if((ix>>=20)==0) 			/* IEEE 754 logb */
-		return -1022.0; 
-	else
-		return (double) (ix-1023); 
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_lrint.c b/newlib/libm/common/s_lrint.c
deleted file mode 100644
index 541bf2c7e..000000000
--- a/newlib/libm/common/s_lrint.c
+++ /dev/null
@@ -1,98 +0,0 @@
-
-/* @(#)s_lrint.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * lrint(x)
- * Return x rounded to integral value according to the prevailing
- * rounding mode.
- * Method:
- *	Using floating addition.
- * Exception:
- *	Inexact flag raised if x not equal to lrint(x).
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double 
-#endif
-
-/* Adding a double, x, to 2^52 will cause the result to be rounded based on
-   the fractional part of x, according to the implementation's current rounding
-   mode.  2^52 is the smallest double that can be represented using all 52 significant
-   digits. */
-TWO52[2]={
-  4.50359962737049600000e+15, /* 0x43300000, 0x00000000 */
- -4.50359962737049600000e+15, /* 0xC3300000, 0x00000000 */
-};
-
-#ifdef __STDC__
-	long int lrint(double x)
-#else
-	long int lrint(x)
-	double x;
-#endif
-{
-  __int32_t i0,j0,sx;
-  __uint32_t i1;
-  double t;
-  volatile double w;
-  long int result;
-  
-  EXTRACT_WORDS(i0,i1,x);
-  sx = (i0>>31)&1;
-  j0 = ((i0 & 0x7ff00000) >> 20) - 1023;
-  
-  if(j0 < 20)
-    {
-      if(j0 < -1)
-        return 0;
-      else
-        {
-          w = TWO52[sx] + x;
-          t = w - TWO52[sx];
-          GET_HIGH_WORD(i0, t);
-          j0 = ((i0 & 0x7ff00000) >> 20) - 1023;
-          i0 &= 0x000fffff;
-          i0 |= 0x00100000;
-          result = i0 >> (20 - j0);
-        }
-    }
-  else if (j0 < (8 * sizeof (long int)) - 1)
-    {
-      if (j0 >= 52)
-        result = ((long int) i0 << (j0 - 20)) | (i1 << (j0 - 52));
-      else
-        {
-          w = TWO52[sx] + x;
-          t = w - TWO52[sx];
-          EXTRACT_WORDS (i0, i1, t);
-          j0 = ((i0 & 0x7ff00000) >> 20) - 1023;
-          i0 &= 0x000fffff;
-          i0 |= 0x00100000;
-          result = ((long int) i0 << (j0 - 20)) | (i1 >> (52 - j0));
-        }
-    }
-  else
-    {
-      return (long int) x;
-    }
-  
-  return sx ? -result : result;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_lround.c b/newlib/libm/common/s_lround.c
deleted file mode 100644
index 7bd249f9c..000000000
--- a/newlib/libm/common/s_lround.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	long int lround(double x)
-#else
-	long int lround(x)
-	double x;
-#endif
-{
-  __int32_t sign, exponent_less_1023;
-  /* Most significant word, least significant word. */
-  __uint32_t msw, lsw;
-  long int result;
-  
-  EXTRACT_WORDS(msw, lsw, x);
-
-  /* Extract sign. */
-  sign = ((msw & 0x80000000) ? -1 : 1);
-  /* Extract exponent field. */
-  exponent_less_1023 = ((msw & 0x7ff00000) >> 20) - 1023;
-  msw &= 0x000fffff;
-  msw |= 0x00100000;
-
-  if (exponent_less_1023 < 20)
-    {
-      if (exponent_less_1023 < 0)
-        {
-          if (exponent_less_1023 < -1)
-            return 0;
-          else
-            return sign;
-        }
-      else
-        {
-          msw += 0x80000 >> exponent_less_1023;
-          result = msw >> (20 - exponent_less_1023);
-        }
-    }
-  else if (exponent_less_1023 < (8 * sizeof (long int)) - 1)
-    {
-      if (exponent_less_1023 >= 52)
-        result = ((long int) msw << (exponent_less_1023 - 20)) | (lsw << (exponent_less_1023 - 52));
-      else
-        {
-          unsigned int tmp = lsw + (0x80000000 >> (exponent_less_1023 - 20));
-          if (tmp < lsw)
-            ++msw;
-          result = ((long int) msw << (exponent_less_1023 - 20)) | (tmp >> (52 - exponent_less_1023));
-        }
-    }
-  else
-    /* Result is too large to be represented by a long int. */
-    return (long int)x;
-
-  return sign * result;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_matherr.c b/newlib/libm/common/s_matherr.c
deleted file mode 100644
index 58e242834..000000000
--- a/newlib/libm/common/s_matherr.c
+++ /dev/null
@@ -1,123 +0,0 @@
-
-/* @(#)s_matherr.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-
-FUNCTION
-	<<matherr>>---modifiable math error handler
-
-INDEX 
-	matherr
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	int matherr(struct exception *<[e]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	int matherr(*<[e]>)
-	struct exception *<[e]>;
-
-DESCRIPTION
-<<matherr>> is called whenever a math library function generates an error.
-You can replace <<matherr>> by your own subroutine to customize
-error treatment.  The customized <<matherr>> must return 0 if
-it fails to resolve the error, and non-zero if the error is resolved.
-
-When <<matherr>> returns a nonzero value, no error message is printed
-and the value of <<errno>> is not modified.  You can accomplish either
-or both of these things in your own <<matherr>> using the information
-passed in the structure <<*<[e]>>>.
-
-This is the <<exception>> structure (defined in `<<math.h>>'):
-.	struct exception {
-.	        int type;
-.	        char *name;
-.	        double arg1, arg2, retval;
-.		int err;
-.	};
-
-The members of the exception structure have the following meanings:
-o+
-o type
-The type of mathematical error that occured; macros encoding error
-types are also defined in `<<math.h>>'.
-
-o name
-a pointer to a null-terminated string holding the
-name of the math library function where the error occurred.
-
-o arg1, arg2
-The arguments which caused the error.
-
-o retval
-The error return value (what the calling function will return).
-
-o err
-If set to be non-zero, this is the new value assigned to <<errno>>.
-o-
-
-The error types defined in `<<math.h>>' represent possible mathematical
-errors as follows:
-
-o+
-o DOMAIN
-An argument was not in the domain of the function; e.g. <<log(-1.0)>>.
-
-o SING
-The requested calculation would result in a singularity; e.g. <<pow(0.0,-2.0)>>
-
-o OVERFLOW
-A calculation would produce a result too large to represent; e.g.
-<<exp(1000.0)>>. 
-
-o UNDERFLOW
-A calculation would produce a result too small to represent; e.g.
-<<exp(-1000.0)>>. 
-
-o TLOSS
-Total loss of precision.  The result would have no significant digits;
-e.g. <<sin(10e70)>>. 
-
-o PLOSS
-Partial loss of precision.
-o-
-
-
-RETURNS
-The library definition for <<matherr>> returns <<0>> in all cases.
-
-You can change the calling function's result from a customized <<matherr>>
-by modifying <<e->retval>>, which propagates backs to the caller.
-
-If <<matherr>> returns <<0>> (indicating that it was not able to resolve
-the error) the caller sets <<errno>> to an appropriate value, and prints
-an error message.
-
-PORTABILITY
-<<matherr>> is not ANSI C.  
-*/
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	int matherr(struct exception *x)
-#else
-	int matherr(x)
-	struct exception *x;
-#endif
-{
-	int n=0;
-	if(x->arg1!=x->arg1) return 0;
-	return n;
-}
diff --git a/newlib/libm/common/s_modf.c b/newlib/libm/common/s_modf.c
deleted file mode 100644
index 01151397d..000000000
--- a/newlib/libm/common/s_modf.c
+++ /dev/null
@@ -1,131 +0,0 @@
-
-/* @(#)s_modf.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<modf>>, <<modff>>---split fractional and integer parts
-
-INDEX
-	modf
-INDEX
-	modff
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double modf(double <[val]>, double *<[ipart]>);
-        float modff(float <[val]>, float *<[ipart]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double modf(<[val]>, <[ipart]>)
-        double <[val]>;
-        double *<[ipart]>;
-
-	float modff(<[val]>, <[ipart]>)
-	float <[val]>;
-        float *<[ipart]>;
-
-DESCRIPTION
-	<<modf>> splits the double <[val]> apart into an integer part
-	and a fractional part, returning the fractional part and
-	storing the integer part in <<*<[ipart]>>>.  No rounding
-	whatsoever is done; the sum of the integer and fractional
-	parts is guaranteed to be exactly  equal to <[val]>.   That
-	is, if . <[realpart]> = modf(<[val]>, &<[intpart]>); then
-	`<<<[realpart]>+<[intpart]>>>' is the same as <[val]>.
-	<<modff>> is identical, save that it takes and returns
-	<<float>> rather than <<double>> values. 
-
-RETURNS
-	The fractional part is returned.  Each result has the same
-	sign as the supplied argument <[val]>.
-
-PORTABILITY
-	<<modf>> is ANSI C. <<modff>> is an extension.
-
-QUICKREF
-	modf  ansi pure 
-	modff - pure
-
-*/
-
-/*
- * modf(double x, double *iptr) 
- * return fraction part of x, and return x's integral part in *iptr.
- * Method:
- *	Bit twiddling.
- *
- * Exception:
- *	No exception.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0;
-#else
-static double one = 1.0;
-#endif
-
-#ifdef __STDC__
-	double modf(double x, double *iptr)
-#else
-	double modf(x, iptr)
-	double x,*iptr;
-#endif
-{
-	__int32_t i0,i1,j0;
-	__uint32_t i;
-	EXTRACT_WORDS(i0,i1,x);
-	j0 = ((i0>>20)&0x7ff)-0x3ff;	/* exponent of x */
-	if(j0<20) {			/* integer part in high x */
-	    if(j0<0) {			/* |x|<1 */
-	        INSERT_WORDS(*iptr,i0&0x80000000,0);	/* *iptr = +-0 */
-		return x;
-	    } else {
-		i = (0x000fffff)>>j0;
-		if(((i0&i)|i1)==0) {		/* x is integral */
-		    __uint32_t high;
-		    *iptr = x;
-		    GET_HIGH_WORD(high,x);
-		    INSERT_WORDS(x,high&0x80000000,0);	/* return +-0 */
-		    return x;
-		} else {
-		    INSERT_WORDS(*iptr,i0&(~i),0);
-		    return x - *iptr;
-		}
-	    }
-	} else if (j0>51) {		/* no fraction part */
-	    __uint32_t high;
-	    *iptr = x*one;
-	    GET_HIGH_WORD(high,x);
-	    INSERT_WORDS(x,high&0x80000000,0);	/* return +-0 */
-	    return x;
-	} else {			/* fraction part in low x */
-	    i = ((__uint32_t)(0xffffffff))>>(j0-20);
-	    if((i1&i)==0) { 		/* x is integral */
-	        __uint32_t high;
-		*iptr = x;
-		GET_HIGH_WORD(high,x);
-		INSERT_WORDS(x,high&0x80000000,0);	/* return +-0 */
-		return x;
-	    } else {
-	        INSERT_WORDS(*iptr,i0,i1&(~i));
-		return x - *iptr;
-	    }
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_nan.c b/newlib/libm/common/s_nan.c
deleted file mode 100644
index 7ff4ef73e..000000000
--- a/newlib/libm/common/s_nan.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * nan () returns a nan.
- * Added by Cygnus Support.
- */
-
-/*
-FUNCTION
-	<<nan>>, <<nanf>>---representation of ``Not a Number''
-
-INDEX
-	nan
-INDEX
-	nanf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double nan(const char *);
-	float nanf(const char *);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double nan();
-	float nanf();
-
-
-DESCRIPTION
-	<<nan>> and <<nanf>> return an IEEE NaN (Not a Number) in
-	double- and single-precision arithmetic respectively.  The
-	argument is currently disregarded.
-
-QUICKREF
-	nan - pure
-
-*/
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-	double nan(const char *unused)
-{
-	double x;
-
-	INSERT_WORDS(x,0x7ff80000,0);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_nearbyint.c b/newlib/libm/common/s_nearbyint.c
deleted file mode 100644
index 25e629b65..000000000
--- a/newlib/libm/common/s_nearbyint.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#include <math.h>
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double nearbyint(double x)
-#else
-	double nearbyint(x)
-	double x;
-#endif
-{
-  return rint(x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_nextafter.c b/newlib/libm/common/s_nextafter.c
deleted file mode 100644
index 3a7fa3fec..000000000
--- a/newlib/libm/common/s_nextafter.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-/* @(#)s_nextafter.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<nextafter>>, <<nextafterf>>---get next number
-
-INDEX
-	nextafter
-INDEX
-	nextafterf
-
-ANSI_SYNOPSIS
-       #include <math.h>
-       double nextafter(double <[val]>, double <[dir]>);
-       float nextafterf(float <[val]>, float <[dir]>);
-
-TRAD_SYNOPSIS
-       #include <math.h>
-
-       double nextafter(<[val]>, <[dir]>)
-              double <[val]>;
-              double <[exp]>;
-
-       float nextafter(<[val]>, <[dir]>)
-              float <[val]>;
-              float <[dir]>;
-
-
-DESCRIPTION
-<<nextafter>> returns the double-precision floating-point number
-closest to <[val]> in the direction toward <[dir]>.  <<nextafterf>>
-performs the same operation in single precision.  For example,
-<<nextafter(0.0,1.0)>> returns the smallest positive number which is
-representable in double precision.
-
-RETURNS
-Returns the next closest number to <[val]> in the direction toward
-<[dir]>.
-
-PORTABILITY
-	Neither <<nextafter>> nor <<nextafterf>> is required by ANSI C
-	or by the System V Interface Definition (Issue 2).
-*/
-
-/* IEEE functions
- *	nextafter(x,y)
- *	return the next machine floating-point number of x in the
- *	direction toward y.
- *   Special cases:
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double nextafter(double x, double y)
-#else
-	double nextafter(x,y)
-	double x,y;
-#endif
-{
-	__int32_t	hx,hy,ix,iy;
-	__uint32_t lx,ly;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hy,ly,y);
-	ix = hx&0x7fffffff;		/* |x| */
-	iy = hy&0x7fffffff;		/* |y| */
-
-	if(((ix>=0x7ff00000)&&((ix-0x7ff00000)|lx)!=0) ||   /* x is nan */ 
-	   ((iy>=0x7ff00000)&&((iy-0x7ff00000)|ly)!=0))     /* y is nan */ 
-	   return x+y;				
-	if(x==y) return x;		/* x=y, return x */
-	if((ix|lx)==0) {			/* x == 0 */
-	    INSERT_WORDS(x,hy&0x80000000,1);	/* return +-minsubnormal */
-	    y = x*x;
-	    if(y==x) return y; else return x;	/* raise underflow flag */
-	} 
-	if(hx>=0) {				/* x > 0 */
-	    if(hx>hy||((hx==hy)&&(lx>ly))) {	/* x > y, x -= ulp */
-		if(lx==0) hx -= 1;
-		lx -= 1;
-	    } else {				/* x < y, x += ulp */
-		lx += 1;
-		if(lx==0) hx += 1;
-	    }
-	} else {				/* x < 0 */
-	    if(hy>=0||hx>hy||((hx==hy)&&(lx>ly))){/* x < y, x -= ulp */
-		if(lx==0) hx -= 1;
-		lx -= 1;
-	    } else {				/* x > y, x += ulp */
-		lx += 1;
-		if(lx==0) hx += 1;
-	    }
-	}
-	hy = hx&0x7ff00000;
-	if(hy>=0x7ff00000) return x+x;	/* overflow  */
-	if(hy<0x00100000) {		/* underflow */
-	    y = x*x;
-	    if(y!=x) {		/* raise underflow flag */
-	        INSERT_WORDS(y,hx,lx);
-		return y;
-	    }
-	}
-	INSERT_WORDS(x,hx,lx);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_remquo.c b/newlib/libm/common/s_remquo.c
deleted file mode 100644
index bd52f39fc..000000000
--- a/newlib/libm/common/s_remquo.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double remquo(double x, double y, int *quo)	/* wrapper remquo */
-#else
-	double remquo(x,y,quo)			/* wrapper remquo */
-	double x,y;
-        int *quo;
-#endif
-{
-        int signx, signy, signres;
-        int mswx;
-        int mswy;
-        double x_over_y;
-
-        GET_HIGH_WORD(mswx, x);
-        GET_HIGH_WORD(mswy, y);
-
-        signx = (mswx & 0x80000000) >> 31;
-        signy = (mswy & 0x80000000) >> 31;
-
-        signres = (signx ^ signy) ? -1 : 1;
-
-        x_over_y = fabs(x / y);
-
-        *quo = signres * (lrint(x_over_y) & 0x7f);
-
-        return remainder(x,y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/s_rint.c b/newlib/libm/common/s_rint.c
deleted file mode 100644
index ba33e4786..000000000
--- a/newlib/libm/common/s_rint.c
+++ /dev/null
@@ -1,90 +0,0 @@
-
-/* @(#)s_rint.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * rint(x)
- * Return x rounded to integral value according to the prevailing
- * rounding mode.
- * Method:
- *	Using floating addition.
- * Exception:
- *	Inexact flag raised if x not equal to rint(x).
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double 
-#endif
-TWO52[2]={
-  4.50359962737049600000e+15, /* 0x43300000, 0x00000000 */
- -4.50359962737049600000e+15, /* 0xC3300000, 0x00000000 */
-};
-
-#ifdef __STDC__
-	double rint(double x)
-#else
-	double rint(x)
-	double x;
-#endif
-{
-	__int32_t i0,j0,sx;
-	__uint32_t i,i1;
-	double t;
-	volatile double w;
-	EXTRACT_WORDS(i0,i1,x);
-	sx = (i0>>31)&1;
-	j0 = ((i0>>20)&0x7ff)-0x3ff;
-	if(j0<20) {
-	    if(j0<0) { 	
-		if(((i0&0x7fffffff)|i1)==0) return x;
-		i1 |= (i0&0x0fffff);
-		i0 &= 0xfffe0000;
-		i0 |= ((i1|-i1)>>12)&0x80000;
-		SET_HIGH_WORD(x,i0);
-	        w = TWO52[sx]+x;
-	        t =  w-TWO52[sx];
-		GET_HIGH_WORD(i0,t);
-		SET_HIGH_WORD(t,(i0&0x7fffffff)|(sx<<31));
-	        return t;
-	    } else {
-		i = (0x000fffff)>>j0;
-		if(((i0&i)|i1)==0) return x; /* x is integral */
-		i>>=1;
-		if(((i0&i)|i1)!=0) {
-		    if(j0==19) i1 = 0x40000000; else
-		    i0 = (i0&(~i))|((0x20000)>>j0);
-		}
-	    }
-	} else if (j0>51) {
-	    if(j0==0x400) return x+x;	/* inf or NaN */
-	    else return x;		/* x is integral */
-	} else {
-	    i = ((__uint32_t)(0xffffffff))>>(j0-20);
-	    if((i1&i)==0) return x;	/* x is integral */
-	    i>>=1;
-	    if((i1&i)!=0) i1 = (i1&(~i))|((0x40000000)>>(j0-20));
-	}
-	INSERT_WORDS(x,i0,i1);
-	w = TWO52[sx]+x;
-	return w-TWO52[sx];
-}
-
-#endif /* _DOUBLE_IS_32BITS */
-
-
-
diff --git a/newlib/libm/common/s_round.c b/newlib/libm/common/s_round.c
deleted file mode 100644
index 09f19de64..000000000
--- a/newlib/libm/common/s_round.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double round(double x)
-#else
-	double round(x)
-	double x;
-#endif
-{
-  /* Most significant word, least significant word. */
-  __int32_t msw, exponent_less_1023;
-  __uint32_t lsw;
-
-  EXTRACT_WORDS(msw, lsw, x);
-
-  /* Extract exponent field. */
-  exponent_less_1023 = ((msw & 0x7ff00000) >> 20) - 1023;
-
-  if (exponent_less_1023 < 20)
-    {
-      if (exponent_less_1023 < 0)
-        {
-          msw &= 0x80000000;
-          if (exponent_less_1023 == -1)
-            /* Result is +1.0 or -1.0. */
-            msw |= (1023 << 20);
-          lsw = 0;
-        }
-      else
-        {
-          __uint32_t exponent_mask = 0x000fffff >> exponent_less_1023;
-          if ((msw & exponent_mask) == 0 && lsw == 0)
-            /* x in an integral value. */
-            return x;
-
-          msw += 0x00080000 >> exponent_less_1023;
-          msw &= ~exponent_mask;
-          lsw = 0;
-        }
-    }
-  else if (exponent_less_1023 > 51)
-    {
-      if (exponent_less_1023 == 1024)
-        /* x is NaN or infinite. */
-        return x + x;
-      else
-        return x;
-    }
-  else
-    {
-      __uint32_t exponent_mask = 0xffffffff >> (exponent_less_1023 - 20);
-      __uint32_t tmp;
-
-      if ((lsw & exponent_mask) == 0)
-        /* x is an integral value. */
-        return x;
-
-      tmp = lsw + (1 << (51 - exponent_less_1023));
-      if (tmp < lsw)
-        msw += 1;
-      lsw = tmp;
-
-      lsw &= ~exponent_mask;
-    }
-  INSERT_WORDS(x, msw, lsw);
-
-  return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_scalbln.c b/newlib/libm/common/s_scalbln.c
deleted file mode 100644
index 5af9d89e7..000000000
--- a/newlib/libm/common/s_scalbln.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* @(#)s_scalbn.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-/*
- * scalbn (double x, int n)
- * scalbn(x,n) returns x* 2**n  computed by  exponent
- * manipulation rather than by actually performing an
- * exponentiation or a multiplication.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-two54   =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
-twom54  =  5.55111512312578270212e-17, /* 0x3C900000, 0x00000000 */
-huge   = 1.0e+300,
-tiny   = 1.0e-300;
-
-#ifdef __STDC__
-	double scalbln (double x, long int n)
-#else
-	double scalbln (x,n)
-	double x; long int n;
-#endif
-{
-	__int32_t k,hx,lx;
-	EXTRACT_WORDS(hx,lx,x);
-        k = (hx&0x7ff00000)>>20;		/* extract exponent */
-        if (k==0) {				/* 0 or subnormal x */
-            if ((lx|(hx&0x7fffffff))==0) return x; /* +-0 */
-	    x *= two54;
-	    GET_HIGH_WORD(hx,x);
-	    k = ((hx&0x7ff00000)>>20) - 54;
-	    }
-        if (k==0x7ff) return x+x;		/* NaN or Inf */
-        k = k+n;
-        if (n> 50000 || k >  0x7fe)
-	  return huge*copysign(huge,x); /* overflow  */
-	if (n< -50000) return tiny*copysign(tiny,x); /*underflow*/
-        if (k > 0) 				/* normal result */
-	    {SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20)); return x;}
-        if (k <= -54)
-	  return tiny*copysign(tiny,x); 	/*underflow*/
-        k += 54;				/* subnormal result */
-	SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20));
-        return x*twom54;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_scalbn.c b/newlib/libm/common/s_scalbn.c
deleted file mode 100644
index 5edf6b766..000000000
--- a/newlib/libm/common/s_scalbn.c
+++ /dev/null
@@ -1,104 +0,0 @@
-
-/* @(#)s_scalbn.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<scalbn>>, <<scalbnf>>---scale by power of two
-INDEX
-	scalbn
-INDEX
-	scalbnf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double scalbn(double <[x]>, int <[y]>);
-	float scalbnf(float <[x]>, int <[y]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double scalbn(<[x]>,<[y]>)
-	double <[x]>;
-	int <[y]>;
-	float scalbnf(<[x]>,<[y]>)
-	float <[x]>;
-	int <[y]>;
-
-DESCRIPTION
-<<scalbn>> and <<scalbnf>> scale <[x]> by <[n]>, returning <[x]> times
-2 to the power <[n]>.  The result is computed by manipulating the
-exponent, rather than by actually performing an exponentiation or
-multiplication.
-
-RETURNS
-<[x]> times 2 to the power <[n]>.
-
-PORTABILITY
-Neither <<scalbn>> nor <<scalbnf>> is required by ANSI C or by the System V
-Interface Definition (Issue 2).
-
-*/
-
-/* 
- * scalbn (double x, int n)
- * scalbn(x,n) returns x* 2**n  computed by  exponent  
- * manipulation rather than by actually performing an 
- * exponentiation or a multiplication.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-two54   =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
-twom54  =  5.55111512312578270212e-17, /* 0x3C900000, 0x00000000 */
-huge   = 1.0e+300,
-tiny   = 1.0e-300;
-
-#ifdef __STDC__
-	double scalbn (double x, int n)
-#else
-	double scalbn (x,n)
-	double x; int n;
-#endif
-{
-	__int32_t  k,hx,lx;
-	EXTRACT_WORDS(hx,lx,x);
-        k = (hx&0x7ff00000)>>20;		/* extract exponent */
-        if (k==0) {				/* 0 or subnormal x */
-            if ((lx|(hx&0x7fffffff))==0) return x; /* +-0 */
-	    x *= two54; 
-	    GET_HIGH_WORD(hx,x);
-	    k = ((hx&0x7ff00000)>>20) - 54; 
-            if (n< -50000) return tiny*x; 	/*underflow*/
-	    }
-        if (k==0x7ff) return x+x;		/* NaN or Inf */
-        k = k+n; 
-        if (k >  0x7fe) return huge*copysign(huge,x); /* overflow  */
-        if (k > 0) 				/* normal result */
-	    {SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20)); return x;}
-        if (k <= -54) {
-            if (n > 50000) 	/* in case integer overflow in n+k */
-		return huge*copysign(huge,x);	/*overflow*/
-	    else return tiny*copysign(tiny,x); 	/*underflow*/
-      }
-        k += 54;				/* subnormal result */
-	SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20));
-        return x*twom54;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/s_signbit.c b/newlib/libm/common/s_signbit.c
deleted file mode 100644
index d7d49cbb1..000000000
--- a/newlib/libm/common/s_signbit.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-int __signbitf (float x);
-int __signbitd (double x);
-
-int
-__signbitf (float x)
-{
-  unsigned int w;
-
-  GET_FLOAT_WORD(w,x);
-
-  return (w & 0x80000000);
-}
-
-int
-__signbitd (double x)
-{
-  unsigned int msw;
-
-  GET_HIGH_WORD(msw, x);
-
-  return (msw & 0x80000000);
-}
diff --git a/newlib/libm/common/s_trunc.c b/newlib/libm/common/s_trunc.c
deleted file mode 100644
index c3ca154d9..000000000
--- a/newlib/libm/common/s_trunc.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double trunc(double x)
-#else
-	double trunc(x)
-	double x;
-#endif
-{
-  int signbit;
-  /* Most significant word, least significant word. */
-  int msw;
-  unsigned int lsw;
-  int exponent_less_1023;
-
-  EXTRACT_WORDS(msw, lsw, x);
-
-  /* Extract sign bit. */
-  signbit = msw & 0x80000000;
-
-  /* Extract exponent field. */
-  exponent_less_1023 = ((msw & 0x7ff00000) >> 20) - 1023;
-
-  if (exponent_less_1023 < 20)
-    {
-      /* All significant digits are in msw. */
-      if (exponent_less_1023 < 0)
-        {
-          /* -1 < x < 1, so result is +0 or -0. */
-          INSERT_WORDS(x, signbit, 0);
-        }
-      else
-        {
-          /* All relevant fraction bits are in msw, so lsw of the result is 0. */
-          INSERT_WORDS(x, signbit | (msw & ~(0x000fffff >> exponent_less_1023)), 0);
-        }
-    }
-  else if (exponent_less_1023 > 51)
-    {
-      if (exponent_less_1023 == 1024)
-        {
-          /* x is infinite, or not a number, so trigger an exception. */
-          return x + x;
-        }
-      /* All bits in the fraction fields of the msw and lsw are needed in the result. */
-    }
-  else
-    {
-      /* All fraction bits in msw are relevant.  Truncate irrelevant
-         bits from lsw. */
-      INSERT_WORDS(x, msw, lsw & ~(0xffffffffu >> (exponent_less_1023 - 20)));
-    }
-  return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/common/sf_cbrt.c b/newlib/libm/common/sf_cbrt.c
deleted file mode 100644
index fe632f0a8..000000000
--- a/newlib/libm/common/sf_cbrt.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* sf_cbrt.c -- float version of s_cbrt.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-/* cbrtf(x)
- * Return cube root of x
- */
-#ifdef __STDC__
-static const __uint32_t 
-#else
-static __uint32_t 
-#endif
-	B1 = 709958130, /* B1 = (84+2/3-0.03306235651)*2**23 */
-	B2 = 642849266; /* B2 = (76+2/3-0.03306235651)*2**23 */
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-C =  5.4285717010e-01, /* 19/35     = 0x3f0af8b0 */
-D = -7.0530611277e-01, /* -864/1225 = 0xbf348ef1 */
-E =  1.4142856598e+00, /* 99/70     = 0x3fb50750 */
-F =  1.6071428061e+00, /* 45/28     = 0x3fcdb6db */
-G =  3.5714286566e-01; /* 5/14      = 0x3eb6db6e */
-
-#ifdef __STDC__
-	float cbrtf(float x) 
-#else
-	float cbrtf(x) 
-	float x;
-#endif
-{
-	__int32_t	hx;
-	float r,s,t;
-	__uint32_t sign;
-	__uint32_t high;
-
-	GET_FLOAT_WORD(hx,x);
-	sign=hx&0x80000000; 		/* sign= sign(x) */
-	hx  ^=sign;
-	if(!FLT_UWORD_IS_FINITE(hx))
-	    return(x+x);		/* cbrt(NaN,INF) is itself */
-	if(FLT_UWORD_IS_ZERO(hx))
-	    return(x);			/* cbrt(0) is itself */
-
-	SET_FLOAT_WORD(x,hx);	/* x <- |x| */
-    /* rough cbrt to 5 bits */
-	if(FLT_UWORD_IS_SUBNORMAL(hx)) 		/* subnormal number */
-	  {SET_FLOAT_WORD(t,0x4b800000); /* set t= 2**24 */
-	   t*=x; GET_FLOAT_WORD(high,t); SET_FLOAT_WORD(t,high/3+B2);
-	  }
-	else
-	  SET_FLOAT_WORD(t,hx/3+B1);
-
-
-    /* new cbrt to 23 bits */
-	r=t*t/x;
-	s=C+r*t;
-	t*=G+F/(s+E+D/s);	
-
-    /* retore the sign bit */
-	GET_FLOAT_WORD(high,t);
-	SET_FLOAT_WORD(t,high|sign);
-	return(t);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double cbrt(double x)
-#else
-	double cbrt(x)
-	double x;
-#endif
-{
-	return (double) cbrtf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_copysign.c b/newlib/libm/common/sf_copysign.c
deleted file mode 100644
index f547c82ed..000000000
--- a/newlib/libm/common/sf_copysign.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* sf_copysign.c -- float version of s_copysign.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * copysignf(float x, float y)
- * copysignf(x,y) returns a value with the magnitude of x and
- * with the sign bit of y.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float copysignf(float x, float y)
-#else
-	float copysignf(x,y)
-	float x,y;
-#endif
-{
-	__uint32_t ix,iy;
-	GET_FLOAT_WORD(ix,x);
-	GET_FLOAT_WORD(iy,y);
-	SET_FLOAT_WORD(x,(ix&0x7fffffff)|(iy&0x80000000));
-        return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double copysign(double x, double y)
-#else
-	double copysign(x,y)
-	double x,y;
-#endif
-{
-	return (double) copysignf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_expm1.c b/newlib/libm/common/sf_expm1.c
deleted file mode 100644
index 4ba3b815a..000000000
--- a/newlib/libm/common/sf_expm1.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* sf_expm1.c -- float version of s_expm1.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-one		= 1.0,
-huge		= 1.0e+30,
-tiny		= 1.0e-30,
-ln2_hi		= 6.9313812256e-01,/* 0x3f317180 */
-ln2_lo		= 9.0580006145e-06,/* 0x3717f7d1 */
-invln2		= 1.4426950216e+00,/* 0x3fb8aa3b */
-	/* scaled coefficients related to expm1 */
-Q1  =  -3.3333335072e-02, /* 0xbd088889 */
-Q2  =   1.5873016091e-03, /* 0x3ad00d01 */
-Q3  =  -7.9365076090e-05, /* 0xb8a670cd */
-Q4  =   4.0082177293e-06, /* 0x36867e54 */
-Q5  =  -2.0109921195e-07; /* 0xb457edbb */
-
-#ifdef __STDC__
-	float expm1f(float x)
-#else
-	float expm1f(x)
-	float x;
-#endif
-{
-	float y,hi,lo,c,t,e,hxs,hfx,r1;
-	__int32_t k,xsb;
-	__uint32_t hx;
-
-	GET_FLOAT_WORD(hx,x);
-	xsb = hx&0x80000000;		/* sign bit of x */
-	if(xsb==0) y=x; else y= -x;	/* y = |x| */
-	hx &= 0x7fffffff;		/* high word of |x| */
-
-    /* filter out huge and non-finite argument */
-	if(hx >= 0x4195b844) {			/* if |x|>=27*ln2 */
-	    if(FLT_UWORD_IS_NAN(hx))
-	        return x+x;
-	    if(FLT_UWORD_IS_INFINITE(hx))
-		return (xsb==0)? x:-1.0;/* exp(+-inf)={inf,-1} */
-	    if(xsb == 0 && hx > FLT_UWORD_LOG_MAX) /* if x>=o_threshold */
-		return huge*huge; /* overflow */
-	    if(xsb!=0) { /* x < -27*ln2, return -1.0 with inexact */
-		if(x+tiny<(float)0.0)	/* raise inexact */
-		return tiny-one;	/* return -1 */
-	    }
-	}
-
-    /* argument reduction */
-	if(hx > 0x3eb17218) {		/* if  |x| > 0.5 ln2 */ 
-	    if(hx < 0x3F851592) {	/* and |x| < 1.5 ln2 */
-		if(xsb==0)
-		    {hi = x - ln2_hi; lo =  ln2_lo;  k =  1;}
-		else
-		    {hi = x + ln2_hi; lo = -ln2_lo;  k = -1;}
-	    } else {
-		k  = invln2*x+((xsb==0)?(float)0.5:(float)-0.5);
-		t  = k;
-		hi = x - t*ln2_hi;	/* t*ln2_hi is exact here */
-		lo = t*ln2_lo;
-	    }
-	    x  = hi - lo;
-	    c  = (hi-x)-lo;
-	} 
-	else if(hx < 0x33000000) {  	/* when |x|<2**-25, return x */
-	    t = huge+x;	/* return x with inexact flags when x!=0 */
-	    return x - (t-(huge+x));	
-	}
-	else k = 0;
-
-    /* x is now in primary range */
-	hfx = (float)0.5*x;
-	hxs = x*hfx;
-	r1 = one+hxs*(Q1+hxs*(Q2+hxs*(Q3+hxs*(Q4+hxs*Q5))));
-	t  = (float)3.0-r1*hfx;
-	e  = hxs*((r1-t)/((float)6.0 - x*t));
-	if(k==0) return x - (x*e-hxs);		/* c is 0 */
-	else {
-	    e  = (x*(e-c)-c);
-	    e -= hxs;
-	    if(k== -1) return (float)0.5*(x-e)-(float)0.5;
-           if(k==1) {
-	       	if(x < (float)-0.25) return -(float)2.0*(e-(x+(float)0.5));
-	       	else 	      return  one+(float)2.0*(x-e);
-           }
-	    if (k <= -2 || k>56) {   /* suffice to return exp(x)-1 */
-	        __int32_t i;
-	        y = one-(e-x);
-		GET_FLOAT_WORD(i,y);
-		SET_FLOAT_WORD(y,i+(k<<23));	/* add k to y's exponent */
-	        return y-one;
-	    }
-	    t = one;
-	    if(k<23) {
-	        __int32_t i;
-	        SET_FLOAT_WORD(t,0x3f800000 - (0x1000000>>k)); /* t=1-2^-k */
-	       	y = t-(e-x);
-		GET_FLOAT_WORD(i,y);
-		SET_FLOAT_WORD(y,i+(k<<23));	/* add k to y's exponent */
-	   } else {
-	        __int32_t i;
-		SET_FLOAT_WORD(t,((0x7f-k)<<23));	/* 2^-k */
-	       	y = x-(e+t);
-	       	y += one;
-		GET_FLOAT_WORD(i,y);
-		SET_FLOAT_WORD(y,i+(k<<23));	/* add k to y's exponent */
-	    }
-	}
-	return y;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double expm1(double x)
-#else
-	double expm1(x)
-	double x;
-#endif
-{
-	return (double) expm1f((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_fdim.c b/newlib/libm/common/sf_fdim.c
deleted file mode 100644
index 80221ace1..000000000
--- a/newlib/libm/common/sf_fdim.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float fdimf(float x, float y)
-#else
-	float fdimf(x,y)
-	float x;
-	float y;
-#endif
-{
-  int c = __fpclassifyf(x);
-  if (c == FP_NAN || c == FP_INFINITE)
-    return HUGE_VAL;
-
-  return x > y ? x - y : 0.0;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fdim(double x, double y)
-#else
-	double fdim(x,y)
-	double x;
-	double y;
-#endif
-{
-  return (double) fdimf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_finite.c b/newlib/libm/common/sf_finite.c
deleted file mode 100644
index cb7026fbd..000000000
--- a/newlib/libm/common/sf_finite.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* sf_finite.c -- float version of s_finite.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * finitef(x) returns 1 is x is finite, else 0;
- * no branching!
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	int finitef(float x)
-#else
-	int finitef(x)
-	float x;
-#endif
-{
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	return (FLT_UWORD_IS_FINITE(ix));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int finite(double x)
-#else
-	int finite(x)
-	double x;
-#endif
-{
-	return finitef((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_fma.c b/newlib/libm/common/sf_fma.c
deleted file mode 100644
index 3b4bcc1ce..000000000
--- a/newlib/libm/common/sf_fma.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float fmaf(float x, float y, float z)
-#else
-	float fmaf(x,y,z)
-	float x;
-	float y;
-        float z;
-#endif
-{
-  /* Let the implementation handle this. */
-  return (x * y) + z;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fma(double x, double y, double z)
-#else
-	double fma(x,y,z)
-	double x;
-	double y;
-        double z;
-#endif
-{
-  return (double) fmaf((float) x, (float) y, (float) z);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_fmax.c b/newlib/libm/common/sf_fmax.c
deleted file mode 100644
index 292b99edf..000000000
--- a/newlib/libm/common/sf_fmax.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float fmaxf(float x, float y)
-#else
-	float fmaxf(x,y)
-	float x;
-	float y;
-#endif
-{
-  if (__fpclassifyf(x) == FP_NAN)
-    return x;
-  if (__fpclassifyf(y) == FP_NAN)
-    return y;
-  
-  return x > y ? x : y;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmax(double x, double y)
-#else
-	double fmax(x,y)
-	double x;
-	double y;
-#endif
-{
-  return (double) fmaxf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_fmin.c b/newlib/libm/common/sf_fmin.c
deleted file mode 100644
index 4ef3510aa..000000000
--- a/newlib/libm/common/sf_fmin.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float fminf(float x, float y)
-#else
-	float fminf(x,y)
-	float x;
-	float y;
-#endif
-{
-  if (__fpclassifyf(x) == FP_NAN)
-    return x;
-  if (__fpclassifyf(y) == FP_NAN)
-    return y;
-  
-  return x < y ? x : y;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmin(double x, double y)
-#else
-	double fmin(x,y)
-	double x;
-	double y;
-#endif
-{
-  return (double) fminf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_ilogb.c b/newlib/libm/common/sf_ilogb.c
deleted file mode 100644
index ec59406e1..000000000
--- a/newlib/libm/common/sf_ilogb.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* sf_ilogb.c -- float version of s_ilogb.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <limits.h>
-
-#ifdef __STDC__
-	int ilogbf(float x)
-#else
-	int ilogbf(x)
-	float x;
-#endif
-{
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-	hx &= 0x7fffffff;
-	if(FLT_UWORD_IS_ZERO(hx))
-	    return - INT_MAX;	/* ilogb(0) = 0x80000001 */
-	if(FLT_UWORD_IS_SUBNORMAL(hx)) {
-	    for (ix = -126,hx<<=8; hx>0; hx<<=1) ix -=1;
-	    return ix;
-	}
-	else if (!FLT_UWORD_IS_FINITE(hx)) return INT_MAX;
-	else return (hx>>23)-127;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int ilogb(double x)
-#else
-	int ilogb(x)
-	double x;
-#endif
-{
-	return ilogbf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_infinity.c b/newlib/libm/common/sf_infinity.c
deleted file mode 100644
index 8722596c9..000000000
--- a/newlib/libm/common/sf_infinity.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * infinityf () returns the representation of infinity.
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-	float infinityf()
-{
-	float x;
-
-	SET_FLOAT_WORD(x,0x7f800000);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-	double infinity()
-{
-	return (double) infinityf();
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_log1p.c b/newlib/libm/common/sf_log1p.c
deleted file mode 100644
index e09170f3e..000000000
--- a/newlib/libm/common/sf_log1p.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* sf_log1p.c -- float version of s_log1p.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-ln2_hi =   6.9313812256e-01,	/* 0x3f317180 */
-ln2_lo =   9.0580006145e-06,	/* 0x3717f7d1 */
-two25 =    3.355443200e+07,	/* 0x4c000000 */
-Lp1 = 6.6666668653e-01,	/* 3F2AAAAB */
-Lp2 = 4.0000000596e-01,	/* 3ECCCCCD */
-Lp3 = 2.8571429849e-01, /* 3E924925 */
-Lp4 = 2.2222198546e-01, /* 3E638E29 */
-Lp5 = 1.8183572590e-01, /* 3E3A3325 */
-Lp6 = 1.5313838422e-01, /* 3E1CD04F */
-Lp7 = 1.4798198640e-01; /* 3E178897 */
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	float log1pf(float x)
-#else
-	float log1pf(x)
-	float x;
-#endif
-{
-	float hfsq,f,c,s,z,R,u;
-	__int32_t k,hx,hu,ax;
-
-	GET_FLOAT_WORD(hx,x);
-	ax = hx&0x7fffffff;
-
-	k = 1;
-	if (!FLT_UWORD_IS_FINITE(hx)) return x+x;
-	if (hx < 0x3ed413d7) {			/* x < 0.41422  */
-	    if(ax>=0x3f800000) {		/* x <= -1.0 */
-		if(x==(float)-1.0) return -two25/zero; /* log1p(-1)=+inf */
-		else return (x-x)/(x-x);	/* log1p(x<-1)=NaN */
-	    }
-	    if(ax<0x31000000) {			/* |x| < 2**-29 */
-		if(two25+x>zero			/* raise inexact */
-	            &&ax<0x24800000) 		/* |x| < 2**-54 */
-		    return x;
-		else
-		    return x - x*x*(float)0.5;
-	    }
-	    if(hx>0||hx<=((__int32_t)0xbe95f61f)) {
-		k=0;f=x;hu=1;}	/* -0.2929<x<0.41422 */
-	}
-	if(k!=0) {
-	    if(hx<0x5a000000) {
-		u  = (float)1.0+x; 
-		GET_FLOAT_WORD(hu,u);
-	        k  = (hu>>23)-127;
-		/* correction term */
-	        c  = (k>0)? (float)1.0-(u-x):x-(u-(float)1.0);
-		c /= u;
-	    } else {
-		u  = x;
-		GET_FLOAT_WORD(hu,u);
-	        k  = (hu>>23)-127;
-		c  = 0;
-	    }
-	    hu &= 0x007fffff;
-	    if(hu<0x3504f7) {
-	        SET_FLOAT_WORD(u,hu|0x3f800000);/* normalize u */
-	    } else {
-	        k += 1; 
-		SET_FLOAT_WORD(u,hu|0x3f000000);	/* normalize u/2 */
-	        hu = (0x00800000-hu)>>2;
-	    }
-	    f = u-(float)1.0;
-	}
-	hfsq=(float)0.5*f*f;
-	if(hu==0) {	/* |f| < 2**-20 */
-           if(f==zero) { if(k==0) return zero;  
-                       else {c += k*ln2_lo; return k*ln2_hi+c;}}
-	    R = hfsq*((float)1.0-(float)0.66666666666666666*f);
-	    if(k==0) return f-R; else
-	    	     return k*ln2_hi-((R-(k*ln2_lo+c))-f);
-	}
- 	s = f/((float)2.0+f); 
-	z = s*s;
-	R = z*(Lp1+z*(Lp2+z*(Lp3+z*(Lp4+z*(Lp5+z*(Lp6+z*Lp7))))));
-	if(k==0) return f-(hfsq-s*(hfsq+R)); else
-		 return k*ln2_hi-((hfsq-(s*(hfsq+R)+(k*ln2_lo+c)))-f);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double log1p(double x)
-#else
-	double log1p(x)
-	double x;
-#endif
-{
-	return (double) log1pf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_logb.c b/newlib/libm/common/sf_logb.c
deleted file mode 100644
index f193f91f6..000000000
--- a/newlib/libm/common/sf_logb.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* sf_logb.c -- float version of s_logb.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float logbf(float x)
-#else
-	float logbf(x)
-	float x;
-#endif
-{
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;			/* high |x| */
-	if(FLT_UWORD_IS_ZERO(ix)) return (float)-1.0/fabsf(x);
-	if(!FLT_UWORD_IS_FINITE(ix)) return x*x;
-	if((ix>>=23)==0) 			/* IEEE 754 logb */
-		return -126.0; 
-	else
-		return (float) (ix-127); 
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double logb(double x)
-#else
-	double logb(x)
-	double x;
-#endif
-{
-	return (double) logbf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_lrint.c b/newlib/libm/common/sf_lrint.c
deleted file mode 100644
index a58508f02..000000000
--- a/newlib/libm/common/sf_lrint.c
+++ /dev/null
@@ -1,93 +0,0 @@
-
-/* @(#)sf_lrint.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * lrintf(x)
- * Return x rounded to integral value according to the prevailing
- * rounding mode.
- * Method:
- *	Using floating addition.
- * Exception:
- *	Inexact flag raised if x not equal to lrintf(x).
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float 
-#endif
-TWO23[2]={
-  8.3886080000e+06, /* 0x4b000000 */
- -8.3886080000e+06, /* 0xcb000000 */
-};
-
-#ifdef __STDC__
-	long int lrintf(float x)
-#else
-	long int lrintf(x)
-	float x;
-#endif
-{
-  __int32_t j0,sx;
-  __uint32_t i0;
-  float t;
-  volatile float w;
-  long int result;
-
-  GET_FLOAT_WORD(i0,x);
-
-  /* Extract sign bit. */
-  sx = (i0 >> 31);
-
-  /* Extract exponent field. */
-  j0 = ((i0 & 0x7f800000) >> 23) - 127;
-  
-  if (j0 < (sizeof (long int) * 8) - 1)
-    {
-      if (j0 < -1)
-        return 0;
-      else if (j0 >= 23)
-        result = (long int) i0 << (j0 - 23);
-      else
-        {
-          w = TWO23[sx] + x;
-          t = w - TWO23[sx];
-          GET_FLOAT_WORD (i0, t);
-          j0 = ((i0 >> 23) & 0xff) - 0x7f;
-          i0 &= 0x7fffff;
-          i0 |= 0x800000;
-          result = i0 >> (23 - j0);
-        }
-    }
-  else
-    {
-      return (long int) x;
-    }
-  return sx ? -result : result;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	long int lrint(double x)
-#else
-	long int lrint(x)
-	double x;
-#endif
-{
-  return (double) lrintf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_lround.c b/newlib/libm/common/sf_lround.c
deleted file mode 100644
index d715423e4..000000000
--- a/newlib/libm/common/sf_lround.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	long int lroundf(float x)
-#else
-	long int lroundf(x)
-	float x;
-#endif
-{
-  __int32_t exponent_less_127;
-  __uint32_t w;
-  long int result;
-  __int32_t sign;
-
-  GET_FLOAT_WORD (w, x);
-  exponent_less_127 = ((w & 0x7f800000) >> 23) - 127;
-  sign = (w & 0x80000000) != 0 ? -1 : 1;
-  w &= 0x7fffff;
-  w |= 0x800000;
-
-  if (exponent_less_127 < (8 * sizeof (long int)) - 1)
-    {
-      if (exponent_less_127 < 0)
-        return exponent_less_127 < -1 ? 0 : sign;
-      else if (exponent_less_127 >= 23)
-        result = (long int) w << (exponent_less_127 - 23);
-      else
-        {
-          w += 0x400000 >> exponent_less_127;
-          result = w >> (23 - exponent_less_127);
-        }
-    }
-  else
-      return (long int) x;
-
-  return sign * result;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	long int lround(double x)
-#else
-	long int lround(x)
-	double x;
-#endif
-{
-	return (double) lroundf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_modf.c b/newlib/libm/common/sf_modf.c
deleted file mode 100644
index 6c64e3fa0..000000000
--- a/newlib/libm/common/sf_modf.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* sf_modf.c -- float version of s_modf.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one = 1.0;
-#else
-static float one = 1.0;
-#endif
-
-#ifdef __STDC__
-	float modff(float x, float *iptr)
-#else
-	float modff(x, iptr)
-	float x,*iptr;
-#endif
-{
-	__int32_t i0,j0;
-	__uint32_t i;
-	GET_FLOAT_WORD(i0,x);
-	j0 = ((i0>>23)&0xff)-0x7f;	/* exponent of x */
-	if(j0<23) {			/* integer part in x */
-	    if(j0<0) {			/* |x|<1 */
-	        SET_FLOAT_WORD(*iptr,i0&0x80000000);	/* *iptr = +-0 */
-		return x;
-	    } else {
-		i = (0x007fffff)>>j0;
-		if((i0&i)==0) {			/* x is integral */
-		    __uint32_t ix;
-		    *iptr = x;
-		    GET_FLOAT_WORD(ix,x);
-		    SET_FLOAT_WORD(x,ix&0x80000000);	/* return +-0 */
-		    return x;
-		} else {
-		    SET_FLOAT_WORD(*iptr,i0&(~i));
-		    return x - *iptr;
-		}
-	    }
-	} else {			/* no fraction part */
-	    __uint32_t ix;
-	    *iptr = x*one;
-	    GET_FLOAT_WORD(ix,x);
-	    SET_FLOAT_WORD(x,ix&0x80000000);	/* return +-0 */
-	    return x;
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double modf(double x, double *iptr)
-#else
-	double modf(x, iptr)
-	double x,*iptr;
-#endif
-{
-	return (double) modff((float) x, (float *) iptr);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_nan.c b/newlib/libm/common/sf_nan.c
deleted file mode 100644
index 831f3f79f..000000000
--- a/newlib/libm/common/sf_nan.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * nanf () returns a nan.
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-	float nanf(const char *unused)
-{
-	float x;
-
-	SET_FLOAT_WORD(x,0x7fc00000);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-	double nan(const char *arg)
-{
-	return (double) nanf(arg);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
diff --git a/newlib/libm/common/sf_nearbyint.c b/newlib/libm/common/sf_nearbyint.c
deleted file mode 100644
index 0073b6d65..000000000
--- a/newlib/libm/common/sf_nearbyint.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-
-#include <math.h>
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float nearbyintf(float x)
-#else
-	float nearbyintf(x)
-	float x;
-#endif
-{
-  return rintf(x);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double nearbyint(double x)
-#else
-	double nearbyint(x)
-	double x;
-#endif
-{
-  return (double) nearbyintf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_nextafter.c b/newlib/libm/common/sf_nextafter.c
deleted file mode 100644
index cea4da58d..000000000
--- a/newlib/libm/common/sf_nextafter.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* sf_nextafter.c -- float version of s_nextafter.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float nextafterf(float x, float y)
-#else
-	float nextafterf(x,y)
-	float x,y;
-#endif
-{
-	__int32_t	hx,hy,ix,iy;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hy,y);
-	ix = hx&0x7fffffff;		/* |x| */
-	iy = hy&0x7fffffff;		/* |y| */
-
-	if(FLT_UWORD_IS_NAN(ix) ||
-	   FLT_UWORD_IS_NAN(iy))
-	   return x+y;
-	if(x==y) return x;		/* x=y, return x */
-	if(FLT_UWORD_IS_ZERO(ix)) {		/* x == 0 */
-	    SET_FLOAT_WORD(x,(hy&0x80000000)|FLT_UWORD_MIN);
-	    y = x*x;
-	    if(y==x) return y; else return x;	/* raise underflow flag */
-	}
-	if(hx>=0) {				/* x > 0 */
-	    if(hx>hy) {				/* x > y, x -= ulp */
-		hx -= 1;
-	    } else {				/* x < y, x += ulp */
-		hx += 1;
-	    }
-	} else {				/* x < 0 */
-	    if(hy>=0||hx>hy){			/* x < y, x -= ulp */
-		hx -= 1;
-	    } else {				/* x > y, x += ulp */
-		hx += 1;
-	    }
-	}
-	hy = hx&0x7f800000;
-	if(hy>FLT_UWORD_MAX) return x+x;	/* overflow  */
-	if(hy<0x00800000) {		/* underflow */
-	    y = x*x;
-	    if(y!=x) {		/* raise underflow flag */
-	        SET_FLOAT_WORD(y,hx);
-		return y;
-	    }
-	}
-	SET_FLOAT_WORD(x,hx);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double nextafter(double x, double y)
-#else
-	double nextafter(x,y)
-	double x,y;
-#endif
-{
-	return (double) nextafterf((float) x, (float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_remquo.c b/newlib/libm/common/sf_remquo.c
deleted file mode 100644
index 41c2038d4..000000000
--- a/newlib/libm/common/sf_remquo.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float remquof(float x, float y, int *quo)	/* wrapper remquof */
-#else
-	float remquof(x,y,quo)			/* wrapper remquof */
-	float x,y;
-        int *quo;
-#endif
-{
-        int signx, signy, signres;
-        int wx;
-        int wy;
-        float x_over_y;
-
-        GET_FLOAT_WORD(wx, x);
-        GET_FLOAT_WORD(wy, y);
-
-        signx = (wx & 0x80000000) >> 31;
-        signy = (wy & 0x80000000) >> 31;
-
-        signres = (signx ^ signy) ? -1 : 1;
-
-        x_over_y = fabsf(x / y);
-
-        *quo = signres * (lrintf(x_over_y) & 0x7f);
-
-        return remainderf(x,y);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double remquo(double x, double y, int *quo)	/* wrapper remquof */
-#else
-	double remquo(x,y,quo)			/* wrapper remquof */
-	double x,y;
-        int *quo;
-#endif
-{
-	return (double) remquof((float) x, (float) y, quo);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_rint.c b/newlib/libm/common/sf_rint.c
deleted file mode 100644
index 6459b7a4c..000000000
--- a/newlib/libm/common/sf_rint.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* sf_rint.c -- float version of s_rint.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float 
-#endif
-TWO23[2]={
-  8.3886080000e+06, /* 0x4b000000 */
- -8.3886080000e+06, /* 0xcb000000 */
-};
-
-#ifdef __STDC__
-	float rintf(float x)
-#else
-	float rintf(x)
-	float x;
-#endif
-{
-	__int32_t i0,j0,sx;
-	__uint32_t i,i1,ix;
-	float t;
-	volatile float w;
-	GET_FLOAT_WORD(i0,x);
-	sx = (i0>>31)&1;
-	ix = (i0&0x7fffffff);
-	j0 = (ix>>23)-0x7f;
-	if(j0<23) {
-	    if(FLT_UWORD_IS_ZERO(ix))
-	        return x;
-	    if(j0<0) {
-		i1 = (i0&0x07fffff);
-		i0 &= 0xfff00000;
-		i0 |= ((i1|-i1)>>9)&0x400000;
-		SET_FLOAT_WORD(x,i0);
-	        w = TWO23[sx]+x;
-	        t =  w-TWO23[sx];
-		GET_FLOAT_WORD(i0,t);
-		SET_FLOAT_WORD(t,(i0&0x7fffffff)|(sx<<31));
-	        return t;
-	    } else {
-		i = (0x007fffff)>>j0;
-		if((i0&i)==0) return x; /* x is integral */
-		i>>=1;
-		if((i0&i)!=0) i0 = (i0&(~i))|((0x100000)>>j0);
-	    }
-	} else {
-	    if(!FLT_UWORD_IS_FINITE(ix)) return x+x; /* inf or NaN */
-	    else
-	      return x;		/* x is integral */
-	}
-	SET_FLOAT_WORD(x,i0);
-	w = TWO23[sx]+x;
-	return w-TWO23[sx];
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double rint(double x)
-#else
-	double rint(x)
-	double x;
-#endif
-{
-	return (double) rintf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_round.c b/newlib/libm/common/sf_round.c
deleted file mode 100644
index 75a72fe75..000000000
--- a/newlib/libm/common/sf_round.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float roundf(float x)
-#else
-	float roundf(x)
-	float x;
-#endif
-{
-  int signbit;
-  int w;
-  /* Most significant word, least significant word. */
-  int exponent_less_127;
-
-  GET_FLOAT_WORD(w, x);
-
-  /* Extract sign bit. */
-  signbit = w & 0x80000000;
-
-  /* Extract exponent field. */
-  exponent_less_127 = ((w & 0x7f800000) >> 23) - 127;
-
-  if (exponent_less_127 < 23)
-    {
-      if (exponent_less_127 < 0)
-        {
-          w &= 0x80000000;
-          if (exponent_less_127 == -1)
-            /* Result is +1.0 or -1.0. */
-            w |= (127 << 23);
-        }
-      else
-        {
-          unsigned int exponent_mask = 0x007fffff >> exponent_less_127;
-          if ((w & exponent_mask) == 0)
-            /* x has an integral value. */
-            return x;
-
-          w += 0x00400000 >> exponent_less_127;
-          w &= ~exponent_mask;
-        }
-    }
-  else
-    {
-      if (exponent_less_127 == 128)
-        /* x is NaN or infinite. */
-        return x + x;
-      else
-        return x;
-    }
-  SET_FLOAT_WORD(x, w);
-  return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double round(double x)
-#else
-	double round(x)
-	double x;
-#endif
-{
-	return (double) roundf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_scalbln.c b/newlib/libm/common/sf_scalbln.c
deleted file mode 100644
index dd4baf56a..000000000
--- a/newlib/libm/common/sf_scalbln.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* s_scalbnf.c -- float version of s_scalbn.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-two25   =  3.355443200e+07,	/* 0x4c000000 */
-twom25  =  2.9802322388e-08,	/* 0x33000000 */
-huge   = 1.0e+30,
-tiny   = 1.0e-30;
-
-#ifdef __STDC__
-	float scalblnf (float x, long int n)
-#else
-	float scalblnf (x,n)
-	float x; long int n;
-#endif
-{
-	__int32_t k,ix;
-	GET_FLOAT_WORD(ix,x);
-        k = (ix&0x7f800000)>>23;		/* extract exponent */
-        if (k==0) {				/* 0 or subnormal x */
-            if ((ix&0x7fffffff)==0) return x; /* +-0 */
-	    x *= two25;
-	    GET_FLOAT_WORD(ix,x);
-	    k = ((ix&0x7f800000)>>23) - 25;
-	    }
-        if (k==0xff) return x+x;		/* NaN or Inf */
-        k = k+n;
-        if (n> 50000 || k >  0xfe)
-	  return huge*copysignf(huge,x); /* overflow  */
-	if (n< -50000)
-	  return tiny*copysignf(tiny,x);	/*underflow*/
-        if (k > 0) 				/* normal result */
-	    {SET_FLOAT_WORD(x,(ix&0x807fffff)|(k<<23)); return x;}
-        if (k <= -25)
-	    return tiny*copysignf(tiny,x);	/*underflow*/
-        k += 25;				/* subnormal result */
-	SET_FLOAT_WORD(x,(ix&0x807fffff)|(k<<23));
-        return x*twom25;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double scalbln (double x, long int n)
-#else
-	double scalbln (x,n)
-	double x; long int n;
-#endif
-{
-	return (double) scalblnf((float) x, n);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_scalbn.c b/newlib/libm/common/sf_scalbn.c
deleted file mode 100644
index 700060010..000000000
--- a/newlib/libm/common/sf_scalbn.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* sf_scalbn.c -- float version of s_scalbn.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <limits.h>
-#include <float.h>
-
-#if INT_MAX > 50000
-#define OVERFLOW_INT 50000
-#else
-#define OVERFLOW_INT 30000
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-two25   =  3.355443200e+07,	/* 0x4c000000 */
-twom25  =  2.9802322388e-08,	/* 0x33000000 */
-huge   = 1.0e+30,
-tiny   = 1.0e-30;
-
-#ifdef __STDC__
-	float scalbnf (float x, int n)
-#else
-	float scalbnf (x,n)
-	float x; int n;
-#endif
-{
-	__int32_t  k,ix;
-	__uint32_t hx;
-
-	GET_FLOAT_WORD(ix,x);
-	hx = ix&0x7fffffff;
-        k = hx>>23;		/* extract exponent */
-	if (FLT_UWORD_IS_ZERO(hx))
-	    return x;
-        if (!FLT_UWORD_IS_FINITE(hx))
-	    return x+x;		/* NaN or Inf */
-        if (FLT_UWORD_IS_SUBNORMAL(hx)) {
-	    x *= two25;
-	    GET_FLOAT_WORD(ix,x);
-	    k = ((ix&0x7f800000)>>23) - 25; 
-            if (n< -50000) return tiny*x; 	/*underflow*/
-        }
-        k = k+n; 
-        if (k > FLT_LARGEST_EXP) return huge*copysignf(huge,x); /* overflow  */
-        if (k > 0) 				/* normal result */
-	    {SET_FLOAT_WORD(x,(ix&0x807fffff)|(k<<23)); return x;}
-        if (k < FLT_SMALLEST_EXP) {
-            if (n > OVERFLOW_INT) 	/* in case integer overflow in n+k */
-		return huge*copysignf(huge,x);	/*overflow*/
-	    else return tiny*copysignf(tiny,x);	/*underflow*/
-        }
-        k += 25;				/* subnormal result */
-	SET_FLOAT_WORD(x,(ix&0x807fffff)|(k<<23));
-        return x*twom25;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double scalbn(double x, int n)
-#else
-	double scalbn(x,n)
-	double x;
-	int n;
-#endif
-{
-	return (double) scalbnf((float) x, n);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/common/sf_trunc.c b/newlib/libm/common/sf_trunc.c
deleted file mode 100644
index 74ea933ce..000000000
--- a/newlib/libm/common/sf_trunc.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float truncf(float x)
-#else
-	float truncf(x)
-	float x;
-#endif
-{
-  __int32_t signbit, w, exponent_less_127;
-
-  GET_FLOAT_WORD(w,x);
-
-  /* Extract sign bit. */
-  signbit = w & 0x80000000;
-
-  /* Extract exponent field. */
-  exponent_less_127 = ((w & 0x7f800000) >> 23) - 127;
-
-  if (exponent_less_127 < 23)
-    {
-      if (exponent_less_127 < 0)
-        {
-          /* -1 < x < 1, so result is +0 or -0. */
-          SET_FLOAT_WORD(x, signbit);
-        }
-      else
-        {
-          SET_FLOAT_WORD(x, signbit | (w & ~(0x007fffff >> exponent_less_127)));
-        }
-    }
-  else
-    {
-      if (exponent_less_127 == 255)
-        /* x is NaN or infinite. */
-        return x + x;
-
-      /* All bits in the fraction field are relevant. */
-    }
-  return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double trunc(double x)
-#else
-	double trunc(x)
-	double x;
-#endif
-{
-	return (double) truncf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/config.h.in b/newlib/libm/config.h.in
deleted file mode 100644
index 61025bcef..000000000
--- a/newlib/libm/config.h.in
+++ /dev/null
@@ -1 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
diff --git a/newlib/libm/configure b/newlib/libm/configure
deleted file mode 100755
index cc3cf9a54..000000000
--- a/newlib/libm/configure
+++ /dev/null
@@ -1,3443 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-newlib-hw-fp    Turn on hardware floating point math"
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=libm.texinfo
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-# Check whether --enable-newlib_hw_fp or --disable-newlib_hw_fp was given.
-if test "${enable_newlib_hw_fp+set}" = set; then
-  enableval="$enable_newlib_hw_fp"
-  case "${enableval}" in
-   yes) newlib_hw_fp=true ;;
-   no)  newlib_hw_fp=false ;;
-   *) { echo "configure: error: bad value ${enableval} for --enable-newlib-hw-fp" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_hw_fp=false
-fi
-
-
-
-if test x$newlib_hw_fp = xtrue; then
-  NEWLIB_HW_FP_TRUE=
-  NEWLIB_HW_FP_FALSE='#'
-else
-  NEWLIB_HW_FP_TRUE='#'
-  NEWLIB_HW_FP_FALSE=
-fi
-
-ac_aux_dir=
-for ac_dir in ../.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:613: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:666: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:723: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:756: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 761 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:789: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 794 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:801: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}.."
-  fi
-else
-  newlib_basedir="${srcdir}/.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:969: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:990: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1008: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1051: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1064: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1077: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1090: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1103: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1128: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1158: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1207: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1216: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1231: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1262: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1294: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1326: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1358: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1403: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1457: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1491: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1677: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1707: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1758: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1790: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1801 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1832: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1837: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1865: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1908: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1938: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1941: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1976: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1993: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:2005: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2043: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2064: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2237: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2243: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2267: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2329: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2400: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2432: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2467: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2499: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2566 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2567: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2604: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2617 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2654: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2686: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2721: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2753: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2788: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2820: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2856: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2861 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2890: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2895 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-LIBM_MACHINE_LIB=
-if test -n "${libm_machine_dir}"; then
-  subdirs="machine"
-
-  if test "${use_libtool}" = "yes"; then
-    LIBM_MACHINE_LIB=machine/${libm_machine_dir}/lib${libm_machine_dir}.${aext}
-  else
-    LIBM_MACHINE_LIB=machine/lib.${aext}
-  fi
-fi
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile math/Makefile mathfp/Makefile common/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@NEWLIB_HW_FP_TRUE@%$NEWLIB_HW_FP_TRUE%g
-s%@NEWLIB_HW_FP_FALSE@%$NEWLIB_HW_FP_FALSE%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@LIBM_MACHINE_LIB@%$LIBM_MACHINE_LIB%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile math/Makefile mathfp/Makefile common/Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in machine; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
diff --git a/newlib/libm/configure.in b/newlib/libm/configure.in
deleted file mode 100644
index 1c59c5ad2..000000000
--- a/newlib/libm/configure.in
+++ /dev/null
@@ -1,42 +0,0 @@
-dnl This is the newlib/libm configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(libm.texinfo)
-
-AC_ARG_ENABLE(newlib_hw_fp,
-[  --enable-newlib-hw-fp    Turn on hardware floating point math],
-[case "${enableval}" in
-   yes) newlib_hw_fp=true ;;
-   no)  newlib_hw_fp=false ;;
-   *) AC_MSG_ERROR(bad value ${enableval} for --enable-newlib-hw-fp) ;;
- esac],[newlib_hw_fp=false])
-AM_CONDITIONAL(NEWLIB_HW_FP, test x$newlib_hw_fp = xtrue)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../..)
-
-NEWLIB_CONFIGURE(..)
-
-dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
-dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
-dnl line of the macro which fail because appropriate LDFLAGS are not set.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-LIBM_MACHINE_LIB=
-if test -n "${libm_machine_dir}"; then
-  AC_CONFIG_SUBDIRS(machine)
-  if test "${use_libtool}" = "yes"; then
-    LIBM_MACHINE_LIB=machine/${libm_machine_dir}/lib${libm_machine_dir}.${aext}
-  else
-    LIBM_MACHINE_LIB=machine/lib.${aext}
-  fi
-fi
-
-AC_SUBST(LIBM_MACHINE_LIB)
-
-AC_OUTPUT(Makefile math/Makefile mathfp/Makefile common/Makefile)
diff --git a/newlib/libm/libm.texinfo b/newlib/libm/libm.texinfo
deleted file mode 100644
index 66b322a69..000000000
--- a/newlib/libm/libm.texinfo
+++ /dev/null
@@ -1,163 +0,0 @@
-\input texinfo.tex
-@setfilename libm.info
-@tex
-% NOTE LOCAL KLUGE TO AVOID TOO MUCH WHITESPACE FROM "makedoc"
-\global\long\def\example{%
-\begingroup
-\let\aboveenvbreak=\par
-\let\afterenvbreak=\par
-\parskip=0pt
-\lisp}
-\global\long\def\Eexample{%
-\Elisp
-\endgroup
-\vskip -\parskip% to cancel out effect of following \par
-}
-% END LOCAL WHITESPACE KLUGE
-@end tex
-@syncodeindex fn cp
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* libm::                        An ANSI-C conforming mathematical library.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@ifinfo
-This file documents an ANSI-C conforming mathematical subroutine library.
-
-Copyright (C) 1992, 1993, 1995, 1996-2002 Red Hat, Inc. 
-
-@file{libm} includes software developed at SunPro, a Sun Microsystems,
-Inc. business.  Permission to use, copy, modify, and distribute this
-software is freely granted, provided that this notice is preserved.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-@iftex
-@finalout
-@setchapternewpage odd
-@settitle The Red Hat newlib C Math Library
-@titlepage
-@title The Red Hat newlib C Math Library
-@sp 1
-@subtitle @code{libm} 1.11.0
-@subtitle July 2002
-@author {Steve Chamberlain}
-@author {Roland Pesch}
-@author {Red Hat Support}
-@author {Jeff Johnston}
-@page
-
-@tex
-{\parskip=0pt
-\hfill Red Hat Support\par
-\hfill sac@@cygnus.com\par
-\hfill pesch@@cygnus.com\par
-\hfill jjohnstn@redhat.com\par
-}
-\global\parindent=0pt % Steve likes it this way
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1992, 1993, 1994-2002 Red Hat, Inc. 
-
-@file{libm} includes software developed at SunPro, a Sun Microsystems,
-Inc. business.  Permission to use, copy, modify, and distribute this
-software is freely granted, provided that this notice is preserved.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end titlepage
-@end iftex
-
-@ifinfo
-@node Top
-@top LIBM
-@end ifinfo
-
-@menu
-* Math::           The mathematical functions (`math.h').
-* Reentrancy::     The functions in libm are not reentrant by default.
-* Index::
-@end menu
-
-@include targetdep.tex
-
-@node Reentrancy
-@chapter Reentrancy Properties of @code{libm}
-
-@cindex reentrancy
-@cindex @code{matherr} and reentrancy
-When a libm function detects an exceptional case, @code{errno} may be
-set, the @code{matherr} function may be called, and a error message 
-may be written to the standard error stream.  This behavior may not
-be reentrant.
-
-@c The exact behavior depends on the currently selected error handling 
-@c mode (IEEE, POSIX, X/Open, or SVID).
-
-With reentrant C libraries like the Red Hat newlib C library, @code{errno} is
-a macro which expands to the per-thread error value.  This makes it thread
-safe.
-
-When the user provides his own @code{matherr} function it must be
-reentrant for the math library as a whole to be reentrant.
-
-In normal debugged programs, there are usually no math subroutine
-errors---and therefore no assignments to @code{errno} and no @code{matherr}
-calls; in that situation, the math functions behave reentrantly.
-
-@node Index
-@unnumbered Index
-@printindex cp
-
-@tex
-% I think something like @colophon should be in texinfo.  In the
-% meantime:
-\long\def\colophon{\hbox to0pt{}\vfill
-\centerline{The body of this manual is set in}
-\centerline{\fontname\tenrm,}
-\centerline{with headings in {\bf\fontname\tenbf}}
-\centerline{and examples in {\tt\fontname\tentt}.}
-\centerline{{\it\fontname\tenit\/} and}
-\centerline{{\sl\fontname\tensl\/}}
-\centerline{are used for emphasis.}\vfill}
-\page\colophon
-% Blame: pesch@cygnus.com, 28mar91.
-@end tex
-
-@contents
-@bye
-
-
diff --git a/newlib/libm/machine/Makefile.am b/newlib/libm/machine/Makefile.am
deleted file mode 100644
index ef8b143dd..000000000
--- a/newlib/libm/machine/Makefile.am
+++ /dev/null
@@ -1,26 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(libm_machine_dir) .
-
-if HAVE_LIBM_MACHINE_DIR
-LIBM_MACHLIB = lib.a
-endif
-
-if USE_LIBTOOL
-else
-noinst_LIBRARIES = $(LIBM_MACHLIB)
-
-lib.a: $(libm_machine_dir)/lib.a
-	rm -f $@
-	ln $(libm_machine_dir)/lib.a $@ >/dev/null 2>/dev/null || \
-	 cp $(libm_machine_dir)/lib.a $@
-endif # USE_LIBTOOL
-
-$(libm_machine_dir)/lib.a:
-
-doc:
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libm/machine/Makefile.in b/newlib/libm/machine/Makefile.in
deleted file mode 100644
index cb4363c29..000000000
--- a/newlib/libm/machine/Makefile.in
+++ /dev/null
@@ -1,449 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-machlib = @machlib@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-SUBDIRS = $(libm_machine_dir) .
-
-@HAVE_LIBM_MACHINE_DIR_TRUE@LIBM_MACHLIB = @HAVE_LIBM_MACHINE_DIR_TRUE@lib.a
-
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@$(LIBM_MACHLIB)
-
-ACLOCAL_AMFLAGS = -I ../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-lib_a_SOURCES = lib.a.c
-lib_a_OBJECTS =  lib.a.$(OBJEXT)
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = lib.a.c
-OBJECTS = lib.a.$(OBJEXT)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  ../../acinclude.m4 \
-		../../aclocal.m4 ../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am:
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs-am installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-@USE_LIBTOOL_FALSE@lib.a: $(libm_machine_dir)/lib.a
-@USE_LIBTOOL_FALSE@	rm -f $@
-@USE_LIBTOOL_FALSE@	ln $(libm_machine_dir)/lib.a $@ >/dev/null 2>/dev/null || \
-@USE_LIBTOOL_FALSE@	 cp $(libm_machine_dir)/lib.a $@
-
-$(libm_machine_dir)/lib.a:
-
-doc:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/machine/aclocal.m4 b/newlib/libm/machine/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libm/machine/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libm/machine/configure b/newlib/libm/machine/configure
deleted file mode 100755
index 13f58b7c1..000000000
--- a/newlib/libm/machine/configure
+++ /dev/null
@@ -1,3444 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=i386
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../.. $srcdir/../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../.. $srcdir/../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-machlib=
-
-if test -n "${libm_machine_dir}"; then
-  subdirs="${libm_machine_dir}"
-
-  if test "${use_libtool}" = "yes"; then
-    machlib=${libm_machine_dir}/lib${libm_machine_dir}.${aext}
-  else
-    machlib=${libm_machine_dir}/lib.${aext}
-  fi
-fi
-
-
-
-
-
-
-if test x${libm_machine_dir} != x; then
-  HAVE_LIBM_MACHINE_DIR_TRUE=
-  HAVE_LIBM_MACHINE_DIR_FALSE='#'
-else
-  HAVE_LIBM_MACHINE_DIR_TRUE='#'
-  HAVE_LIBM_MACHINE_DIR_FALSE=
-fi
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@subdirs@%$subdirs%g
-s%@machlib@%$machlib%g
-s%@HAVE_LIBM_MACHINE_DIR_TRUE@%$HAVE_LIBM_MACHINE_DIR_TRUE%g
-s%@HAVE_LIBM_MACHINE_DIR_FALSE@%$HAVE_LIBM_MACHINE_DIR_FALSE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in ${libm_machine_dir}; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
-
-
-
diff --git a/newlib/libm/machine/configure.in b/newlib/libm/machine/configure.in
deleted file mode 100644
index ee3749ddb..000000000
--- a/newlib/libm/machine/configure.in
+++ /dev/null
@@ -1,40 +0,0 @@
-dnl This is the newlib/libm/machine configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(i386)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../..)
-
-NEWLIB_CONFIGURE(../..)
-
-dnl We have to add the following lines because automake detects the
-dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This must be added after
-dnl the call to NEWLIB_CONFIGURE.
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-machlib=
-
-if test -n "${libm_machine_dir}"; then
-  AC_CONFIG_SUBDIRS(${libm_machine_dir})
-  if test "${use_libtool}" = "yes"; then
-    machlib=${libm_machine_dir}/lib${libm_machine_dir}.${aext}
-  else
-    machlib=${libm_machine_dir}/lib.${aext}
-  fi
-fi
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machlib)
-
-AM_CONDITIONAL(HAVE_LIBM_MACHINE_DIR, test x${libm_machine_dir} != x)
-AC_OUTPUT(Makefile)
-
-
-
diff --git a/newlib/libm/machine/i386/Makefile.am b/newlib/libm/machine/i386/Makefile.am
deleted file mode 100644
index 901cf5979..000000000
--- a/newlib/libm/machine/i386/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I $(newlib_basedir)/../newlib/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	f_atan2.S f_atan2f.S f_exp.c f_expf.c \
-	f_frexp.S f_frexpf.S f_log.S f_logf.S f_log10.S f_log10f.S \
-	f_ldexp.S f_ldexpf.S f_pow.c f_powf.c f_tan.S f_tanf.S f_math.h i386mach.h
-
-libi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libi386.la
-libi386_la_SOURCES = $(LIB_SOURCES)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(LIB_SOURCES)
-noinst_DATA = 
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../../Makefile.shared
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libm/machine/i386/Makefile.in b/newlib/libm/machine/i386/Makefile.in
deleted file mode 100644
index 7cd391691..000000000
--- a/newlib/libm/machine/i386/Makefile.in
+++ /dev/null
@@ -1,416 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I $(newlib_basedir)/../newlib/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-LIB_SOURCES = \
-	f_atan2.S f_atan2f.S f_exp.c f_expf.c \
-	f_frexp.S f_frexpf.S f_log.S f_logf.S f_log10.S f_log10f.S \
-	f_ldexp.S f_ldexpf.S f_pow.c f_powf.c f_tan.S f_tanf.S f_math.h i386mach.h
-
-
-libi386_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libi386.la
-@USE_LIBTOOL_TRUE@libi386_la_SOURCES = @USE_LIBTOOL_TRUE@$(LIB_SOURCES)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(LIB_SOURCES)
-
-ACLOCAL_AMFLAGS = -I ../../..
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  f_atan2.$(OBJEXT) f_atan2f.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@f_exp.$(OBJEXT) f_expf.$(OBJEXT) f_frexp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@f_frexpf.$(OBJEXT) f_log.$(OBJEXT) f_logf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@f_log10.$(OBJEXT) f_log10f.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@f_ldexp.$(OBJEXT) f_ldexpf.$(OBJEXT) f_pow.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@f_powf.$(OBJEXT) f_tan.$(OBJEXT) f_tanf.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libi386_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libi386_la_OBJECTS =  f_atan2.lo f_atan2f.lo f_exp.lo \
-@USE_LIBTOOL_TRUE@f_expf.lo f_frexp.lo f_frexpf.lo f_log.lo f_logf.lo \
-@USE_LIBTOOL_TRUE@f_log10.lo f_log10f.lo f_ldexp.lo f_ldexpf.lo \
-@USE_LIBTOOL_TRUE@f_pow.lo f_powf.lo f_tan.lo f_tanf.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libi386_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libi386_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-		../../../acinclude.m4 ../../../aclocal.m4 \
-		../../../libtool.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libi386.la: $(libi386_la_OBJECTS) $(libi386_la_DEPENDENCIES)
-	$(LINK)  $(libi386_la_LDFLAGS) $(libi386_la_OBJECTS) $(libi386_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/machine/i386/aclocal.m4 b/newlib/libm/machine/i386/aclocal.m4
deleted file mode 100644
index 98bba1a0b..000000000
--- a/newlib/libm/machine/i386/aclocal.m4
+++ /dev/null
@@ -1,1191 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the newlib
-dnl configure.in files.
-
-dnl Basic newlib configury.  This calls basic introductory stuff,
-dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-dnl configure.host.  The only argument is the relative path to the top
-dnl newlib directory.
-
-AC_DEFUN(NEWLIB_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[  --enable-multilib         build many library versions (default)],
-[case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl Support --enable-target-optspace
-AC_ARG_ENABLE(target-optspace,
-[  --enable-target-optspace  optimize for space],
-[case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
- esac], [target_optspace=])dnl
-
-dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-AC_ARG_ENABLE(malloc-debugging,
-[  --enable-malloc-debugging indicate malloc debugging requested],
-[case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
- esac], [malloc_debugging=])dnl
-
-dnl Support --enable-newlib-mb
-AC_ARG_ENABLE(newlib-mb,
-[  --enable-newlib-mb        enable multibyte support],
-[case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
- esac], [newlib_mb=])dnl
-
-dnl Support --enable-newlib-multithread
-AC_ARG_ENABLE(newlib-multithread,
-[  --enable-newlib-multithread        enable support for multiple threads],
-[case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
- esac], [newlib_multithread=yes])dnl
-
-dnl Support --enable-newlib-elix-level
-AC_ARG_ENABLE(newlib-elix-level,
-[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-[case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
- esac], [newlib_elix_level=0])dnl
-
-dnl Support --disable-newlib-io-float
-AC_ARG_ENABLE(newlib-io-float,
-[  --disable-newlib-io-float disable printf/scanf family float support],
-[case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
- esac], [newlib_io_float=yes])dnl
-
-dnl Support --disable-newlib-supplied-syscalls
-AC_ARG_ENABLE(newlib-supplied-syscalls,
-[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-[case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
- esac], [newlib_may_supply_syscalls=yes])dnl
-
-AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-test -z "[$]{with_target_subdir}" && with_target_subdir=.
-
-if test "[$]{srcdir}" = "."; then
-  if test "[$]{with_target_subdir}" != "."; then
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-  else
-    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-  fi
-else
-  newlib_basedir="[$]{srcdir}/$1"
-fi
-AC_SUBST(newlib_basedir)
-
-AC_CANONICAL_SYSTEM
-
-AM_INIT_AUTOMAKE(newlib, 1.11.0)
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  AC_EXEEXT
-fi
-
-. [$]{newlib_basedir}/configure.host
-
-newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-AC_SUBST(NEWLIB_CFLAGS)
-
-LDFLAGS=${ldflags}
-AC_SUBST(LDFLAGS)
-
-AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-
-AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-AC_SUBST(OBJEXT)
-AC_SUBST(oext)
-AC_SUBST(aext)
-
-AC_SUBST(libm_machine_dir)
-AC_SUBST(machine_dir)
-AC_SUBST(sys_dir)
-])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
diff --git a/newlib/libm/machine/i386/configure b/newlib/libm/machine/i386/configure
deleted file mode 100755
index 2fc5c91bb..000000000
--- a/newlib/libm/machine/i386/configure
+++ /dev/null
@@ -1,3316 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-multilib         build many library versions (default)"
-ac_help="$ac_help
-  --enable-target-optspace  optimize for space"
-ac_help="$ac_help
-  --enable-malloc-debugging indicate malloc debugging requested"
-ac_help="$ac_help
-  --enable-newlib-mb        enable multibyte support"
-ac_help="$ac_help
-  --enable-newlib-multithread        enable support for multiple threads"
-ac_help="$ac_help
-  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-ac_help="$ac_help
-  --disable-newlib-io-float disable printf/scanf family float support"
-ac_help="$ac_help
-  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-sitefile=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=f_math.h
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
-  fi
-else
-  CONFIG_SITE="$sitefile"
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. $srcdir/../../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:600: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:653: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
-   test "$2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:710: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:743: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:776: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 781 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
- esac
-else
-  multilib=yes
-fi
-
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
-  yes) target_optspace=yes ;;
-  no)  target_optspace=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
- esac
-else
-  target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
-  yes) malloc_debugging=yes ;;
-  no)  malloc_debugging=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
- esac
-else
-  malloc_debugging=
-fi
-
-# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then
-  enableval="$enable_newlib_mb"
-  case "${enableval}" in
-  yes) newlib_mb=yes ;;
-  no)  newlib_mb=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_mb=
-fi
-
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
-  yes) newlib_multithread=yes ;;
-  no)  newlib_multithread=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
-  0)   newlib_elix_level=0 ;;
-  1)   newlib_elix_level=1 ;;
-  2)   newlib_elix_level=2 ;;
-  3)   newlib_elix_level=3 ;;
-  4)   newlib_elix_level=4 ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
-  yes) newlib_io_float=yes ;;
-  no)  newlib_io_float=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
-  yes) newlib_may_supply_syscalls=yes ;;
-  no)  newlib_may_supply_syscalls=no ;;
-  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
- esac
-else
-  newlib_may_supply_syscalls=yes
-fi
-
-
-
-if test x${newlib_may_supply_syscalls} = xyes; then
-  MAY_SUPPLY_SYSCALLS_TRUE=
-  MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
-  MAY_SUPPLY_SYSCALLS_TRUE='#'
-  MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-  else
-    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-  fi
-else
-  newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:956: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:977: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:995: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-
-PACKAGE=newlib
-
-VERSION=1.11.0
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1038: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1051: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1064: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1077: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1090: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1115: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1145: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1194: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1281: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ac_tool_prefix}ar"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1390: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1444: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  
-
-if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-  MAINT=$MAINTAINER_MODE_TRUE
-  
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-  
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1478: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-LDFLAGS=${ldflags}
-
-
-
-
-if test x${newlib_elix_level} = x0; then
-  ELIX_LEVEL_0_TRUE=
-  ELIX_LEVEL_0_FALSE='#'
-else
-  ELIX_LEVEL_0_TRUE='#'
-  ELIX_LEVEL_0_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x1; then
-  ELIX_LEVEL_1_TRUE=
-  ELIX_LEVEL_1_FALSE='#'
-else
-  ELIX_LEVEL_1_TRUE='#'
-  ELIX_LEVEL_1_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x2; then
-  ELIX_LEVEL_2_TRUE=
-  ELIX_LEVEL_2_FALSE='#'
-else
-  ELIX_LEVEL_2_TRUE='#'
-  ELIX_LEVEL_2_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x3; then
-  ELIX_LEVEL_3_TRUE=
-  ELIX_LEVEL_3_FALSE='#'
-else
-  ELIX_LEVEL_3_TRUE='#'
-  ELIX_LEVEL_3_FALSE=
-fi
-
-
-if test x${newlib_elix_level} = x4; then
-  ELIX_LEVEL_4_TRUE=
-  ELIX_LEVEL_4_FALSE='#'
-else
-  ELIX_LEVEL_4_TRUE='#'
-  ELIX_LEVEL_4_FALSE=
-fi
-
-
-
-if test x${use_libtool} = xyes; then
-  USE_LIBTOOL_TRUE=
-  USE_LIBTOOL_FALSE='#'
-else
-  USE_LIBTOOL_TRUE='#'
-  USE_LIBTOOL_FALSE=
-fi
-
-# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-if test "${use_libtool}" = "yes"; then
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1664: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1694: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1745: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1788 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1824: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1852: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1895: checking for ld used by GCC" >&5
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1925: checking for GNU ld" >&5
-else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1928: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1963: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1980: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1992: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2030: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2051: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2224: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2230: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2254: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2316: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2486: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  STRIP=":"
-fi
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-libtool_flags="$libtool_flags --enable-win32-dll"
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 2553 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2591: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-     cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-     ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2673: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2708: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_OBJDUMP"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2807: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_OBJDUMP="objdump"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false"
-fi
-fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
-if test -n "$OBJDUMP"; then
-  echo "$ac_t""$OBJDUMP" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  OBJDUMP="false"
-fi
-fi
-
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2843: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2848 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_need_dllmain=no
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2877: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-mdll
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-  
-
-  
-	 
-	 
-fi
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-s%@newlib_basedir@%$newlib_basedir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-s%@OBJEXT@%$OBJEXT%g
-s%@oext@%$oext%g
-s%@aext@%$aext%g
-s%@libm_machine_dir@%$libm_machine_dir%g
-s%@machine_dir@%$machine_dir%g
-s%@sys_dir@%$sys_dir%g
-s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@LIBTOOL@%$LIBTOOL%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/newlib/libm/machine/i386/configure.in b/newlib/libm/machine/i386/configure.in
deleted file mode 100644
index f05342693..000000000
--- a/newlib/libm/machine/i386/configure.in
+++ /dev/null
@@ -1,22 +0,0 @@
-dnl This is the newlib/libc/machine/i386 configure.in file.
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.5)
-AC_INIT(f_math.h)
-
-dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-AC_CONFIG_AUX_DIR(../../../..)
-
-NEWLIB_CONFIGURE(../../..)
-
-dnl We have to add the following lines because automake detects the
-dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This code must occur after
-dnl NEWLIB_CONFIGURE. 
-
-if test "${use_libtool}" = "yes"; then
-AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
-fi
-
-AC_OUTPUT(Makefile)
diff --git a/newlib/libm/machine/i386/f_atan2.S b/newlib/libm/machine/i386/f_atan2.S
deleted file mode 100644
index 5bb074f80..000000000
--- a/newlib/libm/machine/i386/f_atan2.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/* 
-Fast version of atan2 using Intel float instructions.
-
-   double _f_atan2 (double y, double x);
-
-Function computes arctan ( y / x ).
-There is no error checking or setting of errno.
-*/
-	
-	#include "i386mach.h"
-
-	.global SYM (_f_atan2)
-       SOTYPE_FUNCTION(_f_atan2)
-
-SYM (_f_atan2):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	fldl 16(ebp)
-	fpatan
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_atan2f.S b/newlib/libm/machine/i386/f_atan2f.S
deleted file mode 100644
index 6df0c7539..000000000
--- a/newlib/libm/machine/i386/f_atan2f.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of atan2f using Intel float instructions.
-
-   float _f_atan2f (float y, float x);
-
-Function computes arctan ( y / x ).
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_atan2f)
-       SOTYPE_FUNCTION(_f_atan2f)
-
-SYM (_f_atan2f):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	flds 12(ebp)
-	fpatan
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_exp.c b/newlib/libm/machine/i386/f_exp.c
deleted file mode 100644
index 0ec721b7b..000000000
--- a/newlib/libm/machine/i386/f_exp.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998,2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of exp using Intel float instructions.
-
-   double _f_exp (double x);
-
-Function computes e ** x.  The following special cases exist:
-   1. if x is 0.0 ==> return 1.0
-   2. if x is infinity ==> return infinity
-   3. if x is -infinity ==> return 0.0
-   4. if x is NaN ==> return x
-There is no error checking or setting of errno.
-*/
-
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-double _f_exp (double x)
-{
-   if (check_finite(x))
-     {
-       double result;
-       asm ("fldl2e; fmulp; fld %%st; frndint; fsub %%st,%%st(1); fxch;" \
-          "fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1); fmulp" :
-          "=t"(result) : "0"(x));
-       return result;
-     }
-   else if (x == -infinity())
-     return 0.0;
-
-   return x;
-}
-
-#endif
diff --git a/newlib/libm/machine/i386/f_expf.c b/newlib/libm/machine/i386/f_expf.c
deleted file mode 100644
index b32d1f208..000000000
--- a/newlib/libm/machine/i386/f_expf.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of exp using Intel float instructions.
-
-   float _f_expf (float x);
-
-Function computes e ** x.  The following special cases exist:
-   1. if x is 0.0 ==> return 1.0
-   2. if x is infinity ==> return infinity
-   3. if x is -infinity ==> return 0.0
-   4. if x is NaN ==> return x
-There is no error checking or setting of errno.
-*/
-
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-float _f_expf (float x)
-{
-   if (check_finitef(x))
-     {
-       float result;
-       asm ("fldl2e; fmulp; fld %%st; frndint; fsub %%st,%%st(1); fxch;" \
-          "fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1); fmulp" :
-          "=t"(result) : "0"(x));
-       return result;
-     }
-   else if (x == -infinityf())
-     return 0.0;
-
-   return x;
-}
-
-#endif
diff --git a/newlib/libm/machine/i386/f_frexp.S b/newlib/libm/machine/i386/f_frexp.S
deleted file mode 100644
index febe115bc..000000000
--- a/newlib/libm/machine/i386/f_frexp.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of frexp using Intel float instructions.
-
-   double _f_frexp (double x, int *exp);
-
-Function splits x into y * 2 ** z.  It then
-returns the value of y and updates *exp with z.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_frexp)
-       SOTYPE_FUNCTION(_f_frexp)
-
-SYM (_f_frexp):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	movl 16(ebp),eax
-
-	fxtract
-	fld1
-	fchs
-	fxch
-	fscale
-	fstp st1
-	fxch
-	fld1
-	faddp
-	fistpl 0(eax)
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_frexpf.S b/newlib/libm/machine/i386/f_frexpf.S
deleted file mode 100644
index 909026d66..000000000
--- a/newlib/libm/machine/i386/f_frexpf.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of frexpf using Intel float instructions.
-
-   float _f_frexpf (float x, int *exp);
-
-Function splits x into y * 2 ** z.  It then
-returns the value of y and updates *exp with z.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_frexpf)
-       SOTYPE_FUNCTION(_f_frexpf)
-
-SYM (_f_frexpf):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	movl 12(ebp),eax
-
-	fxtract
-	fld1
-	fchs
-	fxch
-	fscale
-	fstp st1
-	fxch
-	fld1
-	faddp
-	fistpl 0(eax)
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_ldexp.S b/newlib/libm/machine/i386/f_ldexp.S
deleted file mode 100644
index e7b83c438..000000000
--- a/newlib/libm/machine/i386/f_ldexp.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of ldexp using Intel float instructions.
-
-   double _f_ldexp (double x, int exp);
-
-Function calculates x * 2 ** exp.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_ldexp)
-       SOTYPE_FUNCTION(_f_ldexp)
-
-SYM (_f_ldexp):
-	pushl ebp
-	movl esp,ebp
-	fild 16(ebp)
-	fldl 8(ebp)
-	fscale
-	fstp st1
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_ldexpf.S b/newlib/libm/machine/i386/f_ldexpf.S
deleted file mode 100644
index 59d53548c..000000000
--- a/newlib/libm/machine/i386/f_ldexpf.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of ldexpf using Intel float instructions.
-
-   float _f_ldexpf (float x, int exp);
-
-Function calculates x * 2 ** exp.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_ldexpf)
-       SOTYPE_FUNCTION(_f_ldexpf)
-
-SYM (_f_ldexpf):
-	pushl ebp
-	movl esp,ebp
-	fild 12(ebp)
-	flds 8(ebp)
-	fscale
-	fstp st1
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_log.S b/newlib/libm/machine/i386/f_log.S
deleted file mode 100644
index 70e62cbc5..000000000
--- a/newlib/libm/machine/i386/f_log.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of log using Intel float instructions.
-
-   double _f_log (double x);
-
-Function calculates the log base e of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log)
-       SOTYPE_FUNCTION(_f_log)
-
-SYM (_f_log):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2e
-	fdivrp
-	fldl 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_log10.S b/newlib/libm/machine/i386/f_log10.S
deleted file mode 100644
index 8d1b87319..000000000
--- a/newlib/libm/machine/i386/f_log10.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of log10 using Intel float instructions.
-
-   double _f_log10 (double x);
-
-Function calculates the log base 10 of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log10)
-       SOTYPE_FUNCTION(_f_log10)
-
-SYM (_f_log10):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2t
-	fdivrp
-	fldl 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_log10f.S b/newlib/libm/machine/i386/f_log10f.S
deleted file mode 100644
index 66ec5062e..000000000
--- a/newlib/libm/machine/i386/f_log10f.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of logf using Intel float instructions.
-
-   float _f_log10f (float x);
-
-Function calculates the log base 10 of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_log10f)
-       SOTYPE_FUNCTION(_f_log10f)
-
-SYM (_f_log10f):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2t
-	fdivrp
-	flds 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_logf.S b/newlib/libm/machine/i386/f_logf.S
deleted file mode 100644
index 3fafa8d84..000000000
--- a/newlib/libm/machine/i386/f_logf.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.        
- * ==================================================== 
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of logf using Intel float instructions.
-
-   float _f_logf (float x);
-
-Function calculates the log base e of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_logf)
-       SOTYPE_FUNCTION(_f_logf)
-
-SYM (_f_logf):
-	pushl ebp
-	movl esp,ebp
-
-	fld1
-	fldl2e
-	fdivrp
-	flds 8(ebp)
-	fyl2x
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_math.h b/newlib/libm/machine/i386/f_math.h
deleted file mode 100644
index bd44b1e92..000000000
--- a/newlib/libm/machine/i386/f_math.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __F_MATH_H__
-#define __F_MATH_H__
-
-#include <_ansi.h>
-#include "fdlibm.h"
-
-__inline__
-static 
-int 
-_DEFUN (check_finite, (x),
-         double x)
-{  
-  __int32_t hx;
-  GET_HIGH_WORD(hx,x);
-  return  (int)((__uint32_t)((hx&0x7fffffff)-0x7ff00000)>>31);
-}
-
-__inline__
-static 
-int 
-_DEFUN (check_finitef, (x),
-         float x)
-{  
-  __int32_t ix;
-  GET_FLOAT_WORD(ix,x);
-  return  (int)((__uint32_t)((ix&0x7fffffff)-0x7f800000)>>31);
-}
-
-#endif /* __F_MATH_H__ */
diff --git a/newlib/libm/machine/i386/f_pow.c b/newlib/libm/machine/i386/f_pow.c
deleted file mode 100644
index 050faa371..000000000
--- a/newlib/libm/machine/i386/f_pow.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of pow using Intel float instructions.
-
-   double _f_pow (double x, double y);
-
-Function calculates x to power of y.
-The function optimizes the case where x is >0.0 and y is finite.
-In such a case, there is no error checking or setting of errno.
-All other cases defer to normal pow() function which will
-set errno as normal.
-*/
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-double _f_pow (double x, double y)
-{
-  /* following sequence handles the majority of cases for pow() */
-  if (x > 0.0 && check_finite(y))
-    {
-      double result;
-      /* calculate x ** y as 2 ** (y log2(x)).  On Intel, can only
-         raise 2 to an integer or a small fraction, thus, we have
-         to perform two steps 2**integer portion * 2**fraction. */
-      asm ("fldl 8(%%ebp); fyl2x; fld %%st; frndint; fsub %%st,%%st(1);" \
-           "fxch; fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1);"\
-           "fmulp" : "=t" (result) : "0" (y));
-      return result;
-    }
-  else /* all other strange cases, defer to normal pow() */
-    return pow (x,y);
-}
-
-#endif
diff --git a/newlib/libm/machine/i386/f_powf.c b/newlib/libm/machine/i386/f_powf.c
deleted file mode 100644
index ca3ef60c7..000000000
--- a/newlib/libm/machine/i386/f_powf.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of pow using Intel float instructions.
-
-   float _f_powf (float x, float y);
-
-Function calculates x to power of y.
-The function optimizes the case where x is >0.0 and y is finite.
-In such a case, there is no error checking or setting of errno.
-All other cases defer to normal powf() function which will
-set errno as normal.
-*/
-
-#include <math.h>
-#include <ieeefp.h>
-#include "f_math.h"
-
-float _f_powf (float x, float y)
-{
-  /* following sequence handles the majority of cases for pow() */
-  if (x > 0.0 && check_finitef(y))
-    {
-      float result;
-      /* calculate x ** y as 2 ** (y log2(x)).  On Intel, can only
-         raise 2 to an integer or a small fraction, thus, we have
-         to perform two steps 2**integer portion * 2**fraction. */
-      asm ("flds 8(%%ebp); fyl2x; fld %%st; frndint; fsub %%st,%%st(1);" \
-           "fxch; fchs; f2xm1; fld1; faddp; fxch; fld1; fscale; fstp %%st(1);"\
-           "fmulp" : "=t" (result) : "0" (y));
-      return result;
-    }
-  else /* all other strange cases, defer to normal pow() */
-    return powf (x,y);
-}
-
-#endif
diff --git a/newlib/libm/machine/i386/f_tan.S b/newlib/libm/machine/i386/f_tan.S
deleted file mode 100644
index c7c370470..000000000
--- a/newlib/libm/machine/i386/f_tan.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ==================================================== 
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved. 
- *                      
- * Permission to use, copy, modify, and distribute this 
- * software is freely granted, provided that this notice
- * is preserved.             
- * ==================================================== 
- */             
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of tan using Intel float instructions.
-
-   double _f_tan (double x);
-
-Function calculates the tangent of x.
-There is no error checking or setting of errno. 
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_tan)
-       SOTYPE_FUNCTION(_f_tan)
-
-SYM (_f_tan):
-	pushl ebp
-	movl esp,ebp
-	fldl 8(ebp)
-	fptan
-	fincstp
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/f_tanf.S b/newlib/libm/machine/i386/f_tanf.S
deleted file mode 100644
index 6afda9e73..000000000
--- a/newlib/libm/machine/i386/f_tanf.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * ====================================================
- * Copyright (C) 1998, 2002 by Red Hat Inc. All rights reserved.
- *                              
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.                
- * ====================================================
- */                     
-
-#if !defined(_SOFT_FLOAT)
-
-/*
-Fast version of tanf using Intel float instructions.
-
-   float _f_tanf (float x);
-
-Function calculates the tangent of x.
-There is no error checking or setting of errno.
-*/
-
-	#include "i386mach.h"
-
-	.global SYM (_f_tanf)
-       SOTYPE_FUNCTION(_f_tanf)
-
-SYM (_f_tanf):
-	pushl ebp
-	movl esp,ebp
-	flds 8(ebp)
-	fptan
-	fincstp
-
-	leave
-	ret
-
-#endif
diff --git a/newlib/libm/machine/i386/i386mach.h b/newlib/libm/machine/i386/i386mach.h
deleted file mode 100644
index 23c32190d..000000000
--- a/newlib/libm/machine/i386/i386mach.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*  This file was based on the modified setjmp.S performed by
- *  Joel Sherill (joel@OARcorp.com) which specified the use
- *  of the __USER_LABEL_PREFIX__ and __REGISTER_PREFIX__ macros.
- **
- ** This file is distributed WITHOUT ANY WARRANTY; without even the implied
- ** warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* These are predefined by new versions of GNU cpp.  */
- 
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#define __REG_PREFIX__ %
- 
-/* ANSI concatenation macros.  */
- 
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a##b
- 
-/* Use the right prefix for global labels.  */
- 
-#define SYM(x) CONCAT1(__USER_LABEL_PREFIX__, x)
- 
-/* Use the right prefix for registers.  */
- 
-#define REG(x) CONCAT1(__REG_PREFIX__, x)
- 
-#define eax REG(eax)
-#define ebx REG(ebx)
-#define ecx REG(ecx)
-#define edx REG(edx)
-#define esi REG(esi)
-#define edi REG(edi)
-#define ebp REG(ebp)
-#define esp REG(esp)
-
-#define st0 REG(st)
-#define st1 REG(st(1))
-#define st2 REG(st(2))
-#define st3 REG(st(3))
-#define st4 REG(st(4))
-#define st5 REG(st(5))
-#define st6 REG(st(6))
-#define st7 REG(st(7))
-
-#define ax REG(ax)
-#define bx REG(bx)
-#define cx REG(cx)
-#define dx REG(dx)
-
-#define ah REG(ah)
-#define bh REG(bh)
-#define ch REG(ch)
-#define dh REG(dh)
-
-#define al REG(al)
-#define bl REG(bl)
-#define cl REG(cl)
-#define dl REG(dl)
-
-#define mm1 REG(mm1)
-#define mm2 REG(mm2)
-#define mm3 REG(mm3)
-#define mm4 REG(mm4)
-#define mm5 REG(mm5)
-#define mm6 REG(mm6)
-#define mm7 REG(mm7)
-
-#ifdef _I386MACH_NEED_SOTYPE_FUNCTION
-#define SOTYPE_FUNCTION(sym) .type SYM(sym),@function
-#else
-#define SOTYPE_FUNCTION(sym)
-#endif
-
-#ifdef _I386MACH_ALLOW_HW_INTERRUPTS
-#define        __CLI
-#define        __STI
-#else
-#define __CLI  cli
-#define __STI  sti
-#endif
diff --git a/newlib/libm/math/Makefile.am b/newlib/libm/math/Makefile.am
deleted file mode 100644
index 6f7195a38..000000000
--- a/newlib/libm/math/Makefile.am
+++ /dev/null
@@ -1,187 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src = 	k_standard.c k_rem_pio2.c \
-	k_cos.c k_sin.c k_tan.c \
-	e_acos.c e_acosh.c e_asin.c e_atan2.c \
-	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
-	er_gamma.c e_hypot.c e_j0.c \
-	e_j1.c e_jn.c er_lgamma.c \
-	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
-	e_scalb.c e_sinh.c e_sqrt.c \
-	w_acos.c w_acosh.c w_asin.c w_atan2.c \
-	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
-	w_gamma.c wr_gamma.c w_hypot.c w_j0.c \
-	w_j1.c w_jn.c w_lgamma.c wr_lgamma.c \
-	w_log.c w_log10.c w_pow.c w_remainder.c \
-	w_scalb.c w_sinh.c w_sqrt.c \
-	w_sincos.c \
-	w_cabs.c w_drem.c \
-	s_asinh.c s_atan.c s_ceil.c \
-	s_cos.c s_erf.c s_fabs.c s_floor.c \
-	s_frexp.c s_isnan.c s_ldexp.c \
-	s_signif.c s_sin.c \
-	s_tan.c s_tanh.c \
-	s_isinf.c s_infconst.c \
-	w_exp2.c w_tgamma.c
-
-fsrc =	kf_rem_pio2.c \
-	kf_cos.c kf_sin.c kf_tan.c \
-	ef_acos.c ef_acosh.c ef_asin.c ef_atan2.c \
-	ef_atanh.c ef_cosh.c ef_exp.c ef_fmod.c \
-	erf_gamma.c ef_hypot.c ef_j0.c \
-	ef_j1.c ef_jn.c erf_lgamma.c \
-	ef_log.c ef_log10.c ef_pow.c ef_rem_pio2.c ef_remainder.c \
-	ef_scalb.c ef_sinh.c ef_sqrt.c \
-	wf_acos.c wf_acosh.c wf_asin.c wf_atan2.c \
-	wf_atanh.c wf_cosh.c wf_exp.c wf_fmod.c \
-	wf_gamma.c wrf_gamma.c wf_hypot.c wf_j0.c \
-	wf_j1.c wf_jn.c wf_lgamma.c wrf_lgamma.c \
-	wf_log.c wf_log10.c wf_pow.c wf_remainder.c \
-	wf_scalb.c wf_sinh.c wf_sqrt.c \
-	wf_sincos.c \
-	wf_cabs.c wf_drem.c \
-	sf_asinh.c sf_atan.c sf_ceil.c \
-	sf_cos.c sf_erf.c sf_fabs.c sf_floor.c \
-	sf_frexp.c sf_isnan.c sf_ldexp.c \
-	sf_signif.c sf_sin.c \
-	sf_tan.c sf_tanh.c \
-	sf_isinf.c \
-	wf_exp2.c wf_tgamma.c
-
-libmath_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libmath.la
-libmath_la_SOURCES = $(src) $(fsrc)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(src) $(fsrc)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-chobj =	wacos.def wacosh.def wasin.def sasinh.def \
-	satan.def watan2.def watanh.def wj0.def \
-	wcosh.def serf.def wexp.def \
-	sfabs.def sfloor.def wfmod.def sfrexp.def \
-	wgamma.def whypot.def sldexp.def wlog.def \
-	wlog10.def \
-	wpow.def wremainder.def ssin.def wsinh.def \
-	wsqrt.def stan.def stanh.def \
-	sisnan.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(chobj)
-	cat $(srcdir)/math.tex >> $(TARGETDOC)
-
-CLEANFILES = $(chobj) *.ref
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-wacos.def: w_acos.c
-	$(CHEW) < $(srcdir)/w_acos.c >$@ 2>/dev/null
-	touch stmp-def
-wacosh.def: w_acosh.c
-	$(CHEW) < $(srcdir)/w_acosh.c >$@ 2>/dev/null
-	touch stmp-def
-wasin.def: w_asin.c
-	$(CHEW) < $(srcdir)/w_asin.c >$@ 2>/dev/null
-	touch stmp-def
-sasinh.def: s_asinh.c
-	$(CHEW) < $(srcdir)/s_asinh.c >$@ 2>/dev/null
-	touch stmp-def
-satan.def: s_atan.c
-	$(CHEW) < $(srcdir)/s_atan.c >$@ 2>/dev/null
-	touch stmp-def
-watan2.def: w_atan2.c
-	$(CHEW) < $(srcdir)/w_atan2.c >$@ 2>/dev/null
-	touch stmp-def
-watanh.def: w_atanh.c
-	$(CHEW) < $(srcdir)/w_atanh.c >$@ 2>/dev/null
-	touch stmp-def
-wj0.def: w_j0.c
-	$(CHEW) < $(srcdir)/w_j0.c >$@ 2>/dev/null
-	touch stmp-def
-scopysign.def: s_copysign.c
-	$(CHEW) < $(srcdir)/../common/s_copysign.c >$@ 2>/dev/null
-	touch stmp-def
-wcosh.def: w_cosh.c
-	$(CHEW) < $(srcdir)/w_cosh.c >$@ 2>/dev/null
-	touch stmp-def
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_erf.c >$@ 2>/dev/null
-	touch stmp-def
-wexp.def: w_exp.c
-	$(CHEW) < $(srcdir)/w_exp.c >$@ 2>/dev/null
-	touch stmp-def
-sfabs.def: s_fabs.c
-	$(CHEW) < $(srcdir)/s_fabs.c >$@ 2>/dev/null
-	touch stmp-def
-sfloor.def: s_floor.c
-	$(CHEW) < $(srcdir)/s_floor.c >$@ 2>/dev/null
-	touch stmp-def
-wfmod.def: w_fmod.c
-	$(CHEW) < $(srcdir)/w_fmod.c >$@ 2>/dev/null
-	touch stmp-def
-sfrexp.def: s_frexp.c
-	$(CHEW) < $(srcdir)/s_frexp.c >$@ 2>/dev/null
-	touch stmp-def
-wgamma.def: w_gamma.c
-	$(CHEW) < $(srcdir)/w_gamma.c >$@ 2>/dev/null
-	touch stmp-def
-whypot.def: w_hypot.c
-	$(CHEW) < $(srcdir)/w_hypot.c >$@ 2>/dev/null
-	touch stmp-def
-sldexp.def: s_ldexp.c
-	$(CHEW) < $(srcdir)/s_ldexp.c >$@ 2>/dev/null
-	touch stmp-def
-wlog.def: w_log.c
-	$(CHEW) < $(srcdir)/w_log.c >$@ 2>/dev/null
-	touch stmp-def
-wlog10.def: w_log10.c
-	$(CHEW) < $(srcdir)/w_log10.c >$@ 2>/dev/null
-	touch stmp-def
-wpow.def: w_pow.c
-	$(CHEW) < $(srcdir)/w_pow.c >$@ 2>/dev/null
-	touch stmp-def
-wremainder.def: w_remainder.c
-	$(CHEW) < $(srcdir)/w_remainder.c >$@ 2>/dev/null
-	touch stmp-def
-ssin.def: s_sin.c
-	$(CHEW) < $(srcdir)/s_sin.c >$@ 2>/dev/null
-	touch stmp-def
-wsinh.def: w_sinh.c
-	$(CHEW) < $(srcdir)/w_sinh.c >$@ 2>/dev/null
-	touch stmp-def
-wsqrt.def: w_sqrt.c
-	$(CHEW) < $(srcdir)/w_sqrt.c >$@ 2>/dev/null
-	touch stmp-def
-stan.def: s_tan.c
-	$(CHEW) < $(srcdir)/s_tan.c >$@ 2>/dev/null
-	touch stmp-def
-stanh.def: s_tanh.c
-	$(CHEW) < $(srcdir)/s_tanh.c >$@ 2>/dev/null
-	touch stmp-def
-sisnan.def: s_isnan.c
-	$(CHEW) < $(srcdir)/s_isnan.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h $(srcdir)/../common/fdlibm.h
diff --git a/newlib/libm/math/Makefile.in b/newlib/libm/math/Makefile.in
deleted file mode 100644
index 6c17b2b60..000000000
--- a/newlib/libm/math/Makefile.in
+++ /dev/null
@@ -1,616 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBM_MACHINE_LIB = @LIBM_MACHINE_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src = k_standard.c k_rem_pio2.c \
-	k_cos.c k_sin.c k_tan.c \
-	e_acos.c e_acosh.c e_asin.c e_atan2.c \
-	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
-	er_gamma.c e_hypot.c e_j0.c \
-	e_j1.c e_jn.c er_lgamma.c \
-	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
-	e_scalb.c e_sinh.c e_sqrt.c \
-	w_acos.c w_acosh.c w_asin.c w_atan2.c \
-	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
-	w_gamma.c wr_gamma.c w_hypot.c w_j0.c \
-	w_j1.c w_jn.c w_lgamma.c wr_lgamma.c \
-	w_log.c w_log10.c w_pow.c w_remainder.c \
-	w_scalb.c w_sinh.c w_sqrt.c \
-	w_sincos.c \
-	w_cabs.c w_drem.c \
-	s_asinh.c s_atan.c s_ceil.c \
-	s_cos.c s_erf.c s_fabs.c s_floor.c \
-	s_frexp.c s_isnan.c s_ldexp.c \
-	s_signif.c s_sin.c \
-	s_tan.c s_tanh.c \
-	s_isinf.c s_infconst.c \
-	w_exp2.c w_tgamma.c
-
-
-fsrc = kf_rem_pio2.c \
-	kf_cos.c kf_sin.c kf_tan.c \
-	ef_acos.c ef_acosh.c ef_asin.c ef_atan2.c \
-	ef_atanh.c ef_cosh.c ef_exp.c ef_fmod.c \
-	erf_gamma.c ef_hypot.c ef_j0.c \
-	ef_j1.c ef_jn.c erf_lgamma.c \
-	ef_log.c ef_log10.c ef_pow.c ef_rem_pio2.c ef_remainder.c \
-	ef_scalb.c ef_sinh.c ef_sqrt.c \
-	wf_acos.c wf_acosh.c wf_asin.c wf_atan2.c \
-	wf_atanh.c wf_cosh.c wf_exp.c wf_fmod.c \
-	wf_gamma.c wrf_gamma.c wf_hypot.c wf_j0.c \
-	wf_j1.c wf_jn.c wf_lgamma.c wrf_lgamma.c \
-	wf_log.c wf_log10.c wf_pow.c wf_remainder.c \
-	wf_scalb.c wf_sinh.c wf_sqrt.c \
-	wf_sincos.c \
-	wf_cabs.c wf_drem.c \
-	sf_asinh.c sf_atan.c sf_ceil.c \
-	sf_cos.c sf_erf.c sf_fabs.c sf_floor.c \
-	sf_frexp.c sf_isnan.c sf_ldexp.c \
-	sf_signif.c sf_sin.c \
-	sf_tan.c sf_tanh.c \
-	sf_isinf.c \
-	wf_exp2.c wf_tgamma.c
-
-
-libmath_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libmath.la
-@USE_LIBTOOL_TRUE@libmath_la_SOURCES = @USE_LIBTOOL_TRUE@$(src) $(fsrc)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(src) $(fsrc)
-
-chobj = wacos.def wacosh.def wasin.def sasinh.def \
-	satan.def watan2.def watanh.def wj0.def \
-	wcosh.def serf.def wexp.def \
-	sfabs.def sfloor.def wfmod.def sfrexp.def \
-	wgamma.def whypot.def sldexp.def wlog.def \
-	wlog10.def \
-	wpow.def wremainder.def ssin.def wsinh.def \
-	wsqrt.def stan.def stanh.def \
-	sisnan.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(chobj) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  k_standard.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@k_rem_pio2.$(OBJEXT) k_cos.$(OBJEXT) k_sin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@k_tan.$(OBJEXT) e_acos.$(OBJEXT) e_acosh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_asin.$(OBJEXT) e_atan2.$(OBJEXT) e_atanh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_cosh.$(OBJEXT) e_exp.$(OBJEXT) e_fmod.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@er_gamma.$(OBJEXT) e_hypot.$(OBJEXT) e_j0.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_j1.$(OBJEXT) e_jn.$(OBJEXT) er_lgamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_log.$(OBJEXT) e_log10.$(OBJEXT) e_pow.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_rem_pio2.$(OBJEXT) e_remainder.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_scalb.$(OBJEXT) e_sinh.$(OBJEXT) e_sqrt.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_acos.$(OBJEXT) w_acosh.$(OBJEXT) w_asin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_atan2.$(OBJEXT) w_atanh.$(OBJEXT) w_cosh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_exp.$(OBJEXT) w_fmod.$(OBJEXT) w_gamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wr_gamma.$(OBJEXT) w_hypot.$(OBJEXT) w_j0.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_j1.$(OBJEXT) w_jn.$(OBJEXT) w_lgamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wr_lgamma.$(OBJEXT) w_log.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_log10.$(OBJEXT) w_pow.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_remainder.$(OBJEXT) w_scalb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_sinh.$(OBJEXT) w_sqrt.$(OBJEXT) w_sincos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_cabs.$(OBJEXT) w_drem.$(OBJEXT) s_asinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_atan.$(OBJEXT) s_ceil.$(OBJEXT) s_cos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_erf.$(OBJEXT) s_fabs.$(OBJEXT) s_floor.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_frexp.$(OBJEXT) s_isnan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ldexp.$(OBJEXT) s_signif.$(OBJEXT) s_sin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_tan.$(OBJEXT) s_tanh.$(OBJEXT) s_isinf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_infconst.$(OBJEXT) w_exp2.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_tgamma.$(OBJEXT) kf_rem_pio2.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@kf_cos.$(OBJEXT) kf_sin.$(OBJEXT) kf_tan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_acos.$(OBJEXT) ef_acosh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_asin.$(OBJEXT) ef_atan2.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_atanh.$(OBJEXT) ef_cosh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_exp.$(OBJEXT) ef_fmod.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@erf_gamma.$(OBJEXT) ef_hypot.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_j0.$(OBJEXT) ef_j1.$(OBJEXT) ef_jn.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@erf_lgamma.$(OBJEXT) ef_log.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_log10.$(OBJEXT) ef_pow.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_rem_pio2.$(OBJEXT) ef_remainder.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_scalb.$(OBJEXT) ef_sinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_sqrt.$(OBJEXT) wf_acos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_acosh.$(OBJEXT) wf_asin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_atan2.$(OBJEXT) wf_atanh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_cosh.$(OBJEXT) wf_exp.$(OBJEXT) wf_fmod.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_gamma.$(OBJEXT) wrf_gamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_hypot.$(OBJEXT) wf_j0.$(OBJEXT) wf_j1.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_jn.$(OBJEXT) wf_lgamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wrf_lgamma.$(OBJEXT) wf_log.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_log10.$(OBJEXT) wf_pow.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_remainder.$(OBJEXT) wf_scalb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_sinh.$(OBJEXT) wf_sqrt.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_sincos.$(OBJEXT) wf_cabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_drem.$(OBJEXT) sf_asinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_atan.$(OBJEXT) sf_ceil.$(OBJEXT) sf_cos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_erf.$(OBJEXT) sf_fabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_floor.$(OBJEXT) sf_frexp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_isnan.$(OBJEXT) sf_ldexp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_signif.$(OBJEXT) sf_sin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_tan.$(OBJEXT) sf_tanh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_isinf.$(OBJEXT) wf_exp2.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_tgamma.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libmath_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libmath_la_OBJECTS =  k_standard.lo k_rem_pio2.lo \
-@USE_LIBTOOL_TRUE@k_cos.lo k_sin.lo k_tan.lo e_acos.lo e_acosh.lo \
-@USE_LIBTOOL_TRUE@e_asin.lo e_atan2.lo e_atanh.lo e_cosh.lo e_exp.lo \
-@USE_LIBTOOL_TRUE@e_fmod.lo er_gamma.lo e_hypot.lo e_j0.lo e_j1.lo \
-@USE_LIBTOOL_TRUE@e_jn.lo er_lgamma.lo e_log.lo e_log10.lo e_pow.lo \
-@USE_LIBTOOL_TRUE@e_rem_pio2.lo e_remainder.lo e_scalb.lo e_sinh.lo \
-@USE_LIBTOOL_TRUE@e_sqrt.lo w_acos.lo w_acosh.lo w_asin.lo w_atan2.lo \
-@USE_LIBTOOL_TRUE@w_atanh.lo w_cosh.lo w_exp.lo w_fmod.lo w_gamma.lo \
-@USE_LIBTOOL_TRUE@wr_gamma.lo w_hypot.lo w_j0.lo w_j1.lo w_jn.lo \
-@USE_LIBTOOL_TRUE@w_lgamma.lo wr_lgamma.lo w_log.lo w_log10.lo w_pow.lo \
-@USE_LIBTOOL_TRUE@w_remainder.lo w_scalb.lo w_sinh.lo w_sqrt.lo \
-@USE_LIBTOOL_TRUE@w_sincos.lo w_cabs.lo w_drem.lo s_asinh.lo s_atan.lo \
-@USE_LIBTOOL_TRUE@s_ceil.lo s_cos.lo s_erf.lo s_fabs.lo s_floor.lo \
-@USE_LIBTOOL_TRUE@s_frexp.lo s_isnan.lo s_ldexp.lo s_signif.lo s_sin.lo \
-@USE_LIBTOOL_TRUE@s_tan.lo s_tanh.lo s_isinf.lo s_infconst.lo w_exp2.lo \
-@USE_LIBTOOL_TRUE@w_tgamma.lo kf_rem_pio2.lo kf_cos.lo kf_sin.lo \
-@USE_LIBTOOL_TRUE@kf_tan.lo ef_acos.lo ef_acosh.lo ef_asin.lo \
-@USE_LIBTOOL_TRUE@ef_atan2.lo ef_atanh.lo ef_cosh.lo ef_exp.lo \
-@USE_LIBTOOL_TRUE@ef_fmod.lo erf_gamma.lo ef_hypot.lo ef_j0.lo ef_j1.lo \
-@USE_LIBTOOL_TRUE@ef_jn.lo erf_lgamma.lo ef_log.lo ef_log10.lo \
-@USE_LIBTOOL_TRUE@ef_pow.lo ef_rem_pio2.lo ef_remainder.lo ef_scalb.lo \
-@USE_LIBTOOL_TRUE@ef_sinh.lo ef_sqrt.lo wf_acos.lo wf_acosh.lo \
-@USE_LIBTOOL_TRUE@wf_asin.lo wf_atan2.lo wf_atanh.lo wf_cosh.lo \
-@USE_LIBTOOL_TRUE@wf_exp.lo wf_fmod.lo wf_gamma.lo wrf_gamma.lo \
-@USE_LIBTOOL_TRUE@wf_hypot.lo wf_j0.lo wf_j1.lo wf_jn.lo wf_lgamma.lo \
-@USE_LIBTOOL_TRUE@wrf_lgamma.lo wf_log.lo wf_log10.lo wf_pow.lo \
-@USE_LIBTOOL_TRUE@wf_remainder.lo wf_scalb.lo wf_sinh.lo wf_sqrt.lo \
-@USE_LIBTOOL_TRUE@wf_sincos.lo wf_cabs.lo wf_drem.lo sf_asinh.lo \
-@USE_LIBTOOL_TRUE@sf_atan.lo sf_ceil.lo sf_cos.lo sf_erf.lo sf_fabs.lo \
-@USE_LIBTOOL_TRUE@sf_floor.lo sf_frexp.lo sf_isnan.lo sf_ldexp.lo \
-@USE_LIBTOOL_TRUE@sf_signif.lo sf_sin.lo sf_tan.lo sf_tanh.lo \
-@USE_LIBTOOL_TRUE@sf_isinf.lo wf_exp2.lo wf_tgamma.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libmath_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libmath_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus math/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libmath.la: $(libmath_la_OBJECTS) $(libmath_la_DEPENDENCIES)
-	$(LINK)  $(libmath_la_LDFLAGS) $(libmath_la_OBJECTS) $(libmath_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = math
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(chobj)
-	cat $(srcdir)/math.tex >> $(TARGETDOC)
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-wacos.def: w_acos.c
-	$(CHEW) < $(srcdir)/w_acos.c >$@ 2>/dev/null
-	touch stmp-def
-wacosh.def: w_acosh.c
-	$(CHEW) < $(srcdir)/w_acosh.c >$@ 2>/dev/null
-	touch stmp-def
-wasin.def: w_asin.c
-	$(CHEW) < $(srcdir)/w_asin.c >$@ 2>/dev/null
-	touch stmp-def
-sasinh.def: s_asinh.c
-	$(CHEW) < $(srcdir)/s_asinh.c >$@ 2>/dev/null
-	touch stmp-def
-satan.def: s_atan.c
-	$(CHEW) < $(srcdir)/s_atan.c >$@ 2>/dev/null
-	touch stmp-def
-watan2.def: w_atan2.c
-	$(CHEW) < $(srcdir)/w_atan2.c >$@ 2>/dev/null
-	touch stmp-def
-watanh.def: w_atanh.c
-	$(CHEW) < $(srcdir)/w_atanh.c >$@ 2>/dev/null
-	touch stmp-def
-wj0.def: w_j0.c
-	$(CHEW) < $(srcdir)/w_j0.c >$@ 2>/dev/null
-	touch stmp-def
-scopysign.def: s_copysign.c
-	$(CHEW) < $(srcdir)/../common/s_copysign.c >$@ 2>/dev/null
-	touch stmp-def
-wcosh.def: w_cosh.c
-	$(CHEW) < $(srcdir)/w_cosh.c >$@ 2>/dev/null
-	touch stmp-def
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_erf.c >$@ 2>/dev/null
-	touch stmp-def
-wexp.def: w_exp.c
-	$(CHEW) < $(srcdir)/w_exp.c >$@ 2>/dev/null
-	touch stmp-def
-sfabs.def: s_fabs.c
-	$(CHEW) < $(srcdir)/s_fabs.c >$@ 2>/dev/null
-	touch stmp-def
-sfloor.def: s_floor.c
-	$(CHEW) < $(srcdir)/s_floor.c >$@ 2>/dev/null
-	touch stmp-def
-wfmod.def: w_fmod.c
-	$(CHEW) < $(srcdir)/w_fmod.c >$@ 2>/dev/null
-	touch stmp-def
-sfrexp.def: s_frexp.c
-	$(CHEW) < $(srcdir)/s_frexp.c >$@ 2>/dev/null
-	touch stmp-def
-wgamma.def: w_gamma.c
-	$(CHEW) < $(srcdir)/w_gamma.c >$@ 2>/dev/null
-	touch stmp-def
-whypot.def: w_hypot.c
-	$(CHEW) < $(srcdir)/w_hypot.c >$@ 2>/dev/null
-	touch stmp-def
-sldexp.def: s_ldexp.c
-	$(CHEW) < $(srcdir)/s_ldexp.c >$@ 2>/dev/null
-	touch stmp-def
-wlog.def: w_log.c
-	$(CHEW) < $(srcdir)/w_log.c >$@ 2>/dev/null
-	touch stmp-def
-wlog10.def: w_log10.c
-	$(CHEW) < $(srcdir)/w_log10.c >$@ 2>/dev/null
-	touch stmp-def
-wpow.def: w_pow.c
-	$(CHEW) < $(srcdir)/w_pow.c >$@ 2>/dev/null
-	touch stmp-def
-wremainder.def: w_remainder.c
-	$(CHEW) < $(srcdir)/w_remainder.c >$@ 2>/dev/null
-	touch stmp-def
-ssin.def: s_sin.c
-	$(CHEW) < $(srcdir)/s_sin.c >$@ 2>/dev/null
-	touch stmp-def
-wsinh.def: w_sinh.c
-	$(CHEW) < $(srcdir)/w_sinh.c >$@ 2>/dev/null
-	touch stmp-def
-wsqrt.def: w_sqrt.c
-	$(CHEW) < $(srcdir)/w_sqrt.c >$@ 2>/dev/null
-	touch stmp-def
-stan.def: s_tan.c
-	$(CHEW) < $(srcdir)/s_tan.c >$@ 2>/dev/null
-	touch stmp-def
-stanh.def: s_tanh.c
-	$(CHEW) < $(srcdir)/s_tanh.c >$@ 2>/dev/null
-	touch stmp-def
-sisnan.def: s_isnan.c
-	$(CHEW) < $(srcdir)/s_isnan.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h $(srcdir)/../common/fdlibm.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/math/e_acos.c b/newlib/libm/math/e_acos.c
deleted file mode 100644
index 319b1d56f..000000000
--- a/newlib/libm/math/e_acos.c
+++ /dev/null
@@ -1,111 +0,0 @@
-
-/* @(#)e_acos.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_acos(x)
- * Method :                  
- *	acos(x)  = pi/2 - asin(x)
- *	acos(-x) = pi/2 + asin(x)
- * For |x|<=0.5
- *	acos(x) = pi/2 - (x + x*x^2*R(x^2))	(see asin.c)
- * For x>0.5
- * 	acos(x) = pi/2 - (pi/2 - 2asin(sqrt((1-x)/2)))
- *		= 2asin(sqrt((1-x)/2))  
- *		= 2s + 2s*z*R(z) 	...z=(1-x)/2, s=sqrt(z)
- *		= 2f + (2c + 2s*z*R(z))
- *     where f=hi part of s, and c = (z-f*f)/(s+f) is the correction term
- *     for f so that f+c ~ sqrt(z).
- * For x<-0.5
- *	acos(x) = pi - 2asin(sqrt((1-|x|)/2))
- *		= pi - 0.5*(s+s*z*R(z)), where z=(1-|x|)/2,s=sqrt(z)
- *
- * Special cases:
- *	if x is NaN, return x itself;
- *	if |x|>1, return NaN with invalid signal.
- *
- * Function needed: sqrt
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one=  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-pi =  3.14159265358979311600e+00, /* 0x400921FB, 0x54442D18 */
-pio2_hi =  1.57079632679489655800e+00, /* 0x3FF921FB, 0x54442D18 */
-pio2_lo =  6.12323399573676603587e-17, /* 0x3C91A626, 0x33145C07 */
-pS0 =  1.66666666666666657415e-01, /* 0x3FC55555, 0x55555555 */
-pS1 = -3.25565818622400915405e-01, /* 0xBFD4D612, 0x03EB6F7D */
-pS2 =  2.01212532134862925881e-01, /* 0x3FC9C155, 0x0E884455 */
-pS3 = -4.00555345006794114027e-02, /* 0xBFA48228, 0xB5688F3B */
-pS4 =  7.91534994289814532176e-04, /* 0x3F49EFE0, 0x7501B288 */
-pS5 =  3.47933107596021167570e-05, /* 0x3F023DE1, 0x0DFDF709 */
-qS1 = -2.40339491173441421878e+00, /* 0xC0033A27, 0x1C8A2D4B */
-qS2 =  2.02094576023350569471e+00, /* 0x40002AE5, 0x9C598AC8 */
-qS3 = -6.88283971605453293030e-01, /* 0xBFE6066C, 0x1B8D0159 */
-qS4 =  7.70381505559019352791e-02; /* 0x3FB3B8C5, 0xB12E9282 */
-
-#ifdef __STDC__
-	double __ieee754_acos(double x)
-#else
-	double __ieee754_acos(x)
-	double x;
-#endif
-{
-	double z,p,q,r,w,s,c,df;
-	__int32_t hx,ix;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x3ff00000) {	/* |x| >= 1 */
-	    __uint32_t lx;
-	    GET_LOW_WORD(lx,x);
-	    if(((ix-0x3ff00000)|lx)==0) {	/* |x|==1 */
-		if(hx>0) return 0.0;		/* acos(1) = 0  */
-		else return pi+2.0*pio2_lo;	/* acos(-1)= pi */
-	    }
-	    return (x-x)/(x-x);		/* acos(|x|>1) is NaN */
-	}
-	if(ix<0x3fe00000) {	/* |x| < 0.5 */
-	    if(ix<=0x3c600000) return pio2_hi+pio2_lo;/*if|x|<2**-57*/
-	    z = x*x;
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    r = p/q;
-	    return pio2_hi - (x - (pio2_lo-x*r));
-	} else  if (hx<0) {		/* x < -0.5 */
-	    z = (one+x)*0.5;
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    s = __ieee754_sqrt(z);
-	    r = p/q;
-	    w = r*s-pio2_lo;
-	    return pi - 2.0*(s+w);
-	} else {			/* x > 0.5 */
-	    z = (one-x)*0.5;
-	    s = __ieee754_sqrt(z);
-	    df = s;
-	    SET_LOW_WORD(df,0);
-	    c  = (z-df*df)/(s+df);
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    r = p/q;
-	    w = r*s+c;
-	    return 2.0*(df+w);
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_acosh.c b/newlib/libm/math/e_acosh.c
deleted file mode 100644
index 27984eb23..000000000
--- a/newlib/libm/math/e_acosh.c
+++ /dev/null
@@ -1,70 +0,0 @@
-
-/* @(#)e_acosh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_acosh(x)
- * Method :
- *	Based on 
- *		acosh(x) = log [ x + sqrt(x*x-1) ]
- *	we have
- *		acosh(x) := log(x)+ln2,	if x is large; else
- *		acosh(x) := log(2x-1/(sqrt(x*x-1)+x)) if x>2; else
- *		acosh(x) := log1p(t+sqrt(2.0*t+t*t)); where t=x-1.
- *
- * Special cases:
- *	acosh(x) is NaN with signal if x<1.
- *	acosh(NaN) is NaN without signal.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one	= 1.0,
-ln2	= 6.93147180559945286227e-01;  /* 0x3FE62E42, 0xFEFA39EF */
-
-#ifdef __STDC__
-	double __ieee754_acosh(double x)
-#else
-	double __ieee754_acosh(x)
-	double x;
-#endif
-{	
-	double t;
-	__int32_t hx;
-	__uint32_t lx;
-	EXTRACT_WORDS(hx,lx,x);
-	if(hx<0x3ff00000) {		/* x < 1 */
-	    return (x-x)/(x-x);
-	} else if(hx >=0x41b00000) {	/* x > 2**28 */
-	    if(hx >=0x7ff00000) {	/* x is inf of NaN */
-	        return x+x;
-	    } else 
-		return __ieee754_log(x)+ln2;	/* acosh(huge)=log(2x) */
-	} else if(((hx-0x3ff00000)|lx)==0) {
-	    return 0.0;			/* acosh(1) = 0 */
-	} else if (hx > 0x40000000) {	/* 2**28 > x > 2 */
-	    t=x*x;
-	    return __ieee754_log(2.0*x-one/(x+__ieee754_sqrt(t-one)));
-	} else {			/* 1<x<2 */
-	    t = x-one;
-	    return log1p(t+__ieee754_sqrt(2.0*t+t*t));
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_asin.c b/newlib/libm/math/e_asin.c
deleted file mode 100644
index 4b6f45e15..000000000
--- a/newlib/libm/math/e_asin.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-/* @(#)e_asin.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_asin(x)
- * Method :                  
- *	Since  asin(x) = x + x^3/6 + x^5*3/40 + x^7*15/336 + ...
- *	we approximate asin(x) on [0,0.5] by
- *		asin(x) = x + x*x^2*R(x^2)
- *	where
- *		R(x^2) is a rational approximation of (asin(x)-x)/x^3 
- *	and its remez error is bounded by
- *		|(asin(x)-x)/x^3 - R(x^2)| < 2^(-58.75)
- *
- *	For x in [0.5,1]
- *		asin(x) = pi/2-2*asin(sqrt((1-x)/2))
- *	Let y = (1-x), z = y/2, s := sqrt(z), and pio2_hi+pio2_lo=pi/2;
- *	then for x>0.98
- *		asin(x) = pi/2 - 2*(s+s*z*R(z))
- *			= pio2_hi - (2*(s+s*z*R(z)) - pio2_lo)
- *	For x<=0.98, let pio4_hi = pio2_hi/2, then
- *		f = hi part of s;
- *		c = sqrt(z) - f = (z-f*f)/(s+f) 	...f+c=sqrt(z)
- *	and
- *		asin(x) = pi/2 - 2*(s+s*z*R(z))
- *			= pio4_hi+(pio4-2s)-(2s*z*R(z)-pio2_lo)
- *			= pio4_hi+(pio4-2f)-(2s*z*R(z)-(pio2_lo+2c))
- *
- * Special cases:
- *	if x is NaN, return x itself;
- *	if |x|>1, return NaN with invalid signal.
- *
- */
-
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-huge =  1.000e+300,
-pio2_hi =  1.57079632679489655800e+00, /* 0x3FF921FB, 0x54442D18 */
-pio2_lo =  6.12323399573676603587e-17, /* 0x3C91A626, 0x33145C07 */
-pio4_hi =  7.85398163397448278999e-01, /* 0x3FE921FB, 0x54442D18 */
-	/* coefficient for R(x^2) */
-pS0 =  1.66666666666666657415e-01, /* 0x3FC55555, 0x55555555 */
-pS1 = -3.25565818622400915405e-01, /* 0xBFD4D612, 0x03EB6F7D */
-pS2 =  2.01212532134862925881e-01, /* 0x3FC9C155, 0x0E884455 */
-pS3 = -4.00555345006794114027e-02, /* 0xBFA48228, 0xB5688F3B */
-pS4 =  7.91534994289814532176e-04, /* 0x3F49EFE0, 0x7501B288 */
-pS5 =  3.47933107596021167570e-05, /* 0x3F023DE1, 0x0DFDF709 */
-qS1 = -2.40339491173441421878e+00, /* 0xC0033A27, 0x1C8A2D4B */
-qS2 =  2.02094576023350569471e+00, /* 0x40002AE5, 0x9C598AC8 */
-qS3 = -6.88283971605453293030e-01, /* 0xBFE6066C, 0x1B8D0159 */
-qS4 =  7.70381505559019352791e-02; /* 0x3FB3B8C5, 0xB12E9282 */
-
-#ifdef __STDC__
-	double __ieee754_asin(double x)
-#else
-	double __ieee754_asin(x)
-	double x;
-#endif
-{
-	double t,w,p,q,c,r,s;
-	__int32_t hx,ix;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>= 0x3ff00000) {		/* |x|>= 1 */
-	    __uint32_t lx;
-	    GET_LOW_WORD(lx,x);
-	    if(((ix-0x3ff00000)|lx)==0)
-		    /* asin(1)=+-pi/2 with inexact */
-		return x*pio2_hi+x*pio2_lo;	
-	    return (x-x)/(x-x);		/* asin(|x|>1) is NaN */   
-	} else if (ix<0x3fe00000) {	/* |x|<0.5 */
-	    if(ix<0x3e400000) {		/* if |x| < 2**-27 */
-		if(huge+x>one) return x;/* return x with inexact if x!=0*/
-          } else {
-		t = x*x;
-		p = t*(pS0+t*(pS1+t*(pS2+t*(pS3+t*(pS4+t*pS5)))));
-		q = one+t*(qS1+t*(qS2+t*(qS3+t*qS4)));
-		w = p/q;
-		return x+x*w;
-          }
-	}
-	/* 1> |x|>= 0.5 */
-	w = one-fabs(x);
-	t = w*0.5;
-	p = t*(pS0+t*(pS1+t*(pS2+t*(pS3+t*(pS4+t*pS5)))));
-	q = one+t*(qS1+t*(qS2+t*(qS3+t*qS4)));
-	s = __ieee754_sqrt(t);
-	if(ix>=0x3FEF3333) { 	/* if |x| > 0.975 */
-	    w = p/q;
-	    t = pio2_hi-(2.0*(s+s*w)-pio2_lo);
-	} else {
-	    w  = s;
-	    SET_LOW_WORD(w,0);
-	    c  = (t-w*w)/(s+w);
-	    r  = p/q;
-	    p  = 2.0*s*r-(pio2_lo-2.0*c);
-	    q  = pio4_hi-2.0*w;
-	    t  = pio4_hi-(p-q);
-	}    
-	if(hx>0) return t; else return -t;    
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_atan2.c b/newlib/libm/math/e_atan2.c
deleted file mode 100644
index 268be64a9..000000000
--- a/newlib/libm/math/e_atan2.c
+++ /dev/null
@@ -1,131 +0,0 @@
-
-/* @(#)e_atan2.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_atan2(y,x)
- * Method :
- *	1. Reduce y to positive by atan2(y,x)=-atan2(-y,x).
- *	2. Reduce x to positive by (if x and y are unexceptional): 
- *		ARG (x+iy) = arctan(y/x)   	   ... if x > 0,
- *		ARG (x+iy) = pi - arctan[y/(-x)]   ... if x < 0,
- *
- * Special cases:
- *
- *	ATAN2((anything), NaN ) is NaN;
- *	ATAN2(NAN , (anything) ) is NaN;
- *	ATAN2(+-0, +(anything but NaN)) is +-0  ;
- *	ATAN2(+-0, -(anything but NaN)) is +-pi ;
- *	ATAN2(+-(anything but 0 and NaN), 0) is +-pi/2;
- *	ATAN2(+-(anything but INF and NaN), +INF) is +-0 ;
- *	ATAN2(+-(anything but INF and NaN), -INF) is +-pi;
- *	ATAN2(+-INF,+INF ) is +-pi/4 ;
- *	ATAN2(+-INF,-INF ) is +-3pi/4;
- *	ATAN2(+-INF, (anything but,0,NaN, and INF)) is +-pi/2;
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-tiny  = 1.0e-300,
-zero  = 0.0,
-pi_o_4  = 7.8539816339744827900E-01, /* 0x3FE921FB, 0x54442D18 */
-pi_o_2  = 1.5707963267948965580E+00, /* 0x3FF921FB, 0x54442D18 */
-pi      = 3.1415926535897931160E+00, /* 0x400921FB, 0x54442D18 */
-pi_lo   = 1.2246467991473531772E-16; /* 0x3CA1A626, 0x33145C07 */
-
-#ifdef __STDC__
-	double __ieee754_atan2(double y, double x)
-#else
-	double __ieee754_atan2(y,x)
-	double  y,x;
-#endif
-{  
-	double z;
-	__int32_t k,m,hx,hy,ix,iy;
-	__uint32_t lx,ly;
-
-	EXTRACT_WORDS(hx,lx,x);
-	ix = hx&0x7fffffff;
-	EXTRACT_WORDS(hy,ly,y);
-	iy = hy&0x7fffffff;
-	if(((ix|((lx|-lx)>>31))>0x7ff00000)||
-	   ((iy|((ly|-ly)>>31))>0x7ff00000))	/* x or y is NaN */
-	   return x+y;
-	if((hx-0x3ff00000|lx)==0) return atan(y);   /* x=1.0 */
-	m = ((hy>>31)&1)|((hx>>30)&2);	/* 2*sign(x)+sign(y) */
-
-    /* when y = 0 */
-	if((iy|ly)==0) {
-	    switch(m) {
-		case 0: 
-		case 1: return y; 	/* atan(+-0,+anything)=+-0 */
-		case 2: return  pi+tiny;/* atan(+0,-anything) = pi */
-		case 3: return -pi-tiny;/* atan(-0,-anything) =-pi */
-	    }
-	}
-    /* when x = 0 */
-	if((ix|lx)==0) return (hy<0)?  -pi_o_2-tiny: pi_o_2+tiny;
-	    
-    /* when x is INF */
-	if(ix==0x7ff00000) {
-	    if(iy==0x7ff00000) {
-		switch(m) {
-		    case 0: return  pi_o_4+tiny;/* atan(+INF,+INF) */
-		    case 1: return -pi_o_4-tiny;/* atan(-INF,+INF) */
-		    case 2: return  3.0*pi_o_4+tiny;/*atan(+INF,-INF)*/
-		    case 3: return -3.0*pi_o_4-tiny;/*atan(-INF,-INF)*/
-		}
-	    } else {
-		switch(m) {
-		    case 0: return  zero  ;	/* atan(+...,+INF) */
-		    case 1: return -zero  ;	/* atan(-...,+INF) */
-		    case 2: return  pi+tiny  ;	/* atan(+...,-INF) */
-		    case 3: return -pi-tiny  ;	/* atan(-...,-INF) */
-		}
-	    }
-	}
-    /* when y is INF */
-	if(iy==0x7ff00000) return (hy<0)? -pi_o_2-tiny: pi_o_2+tiny;
-
-    /* compute y/x */
-	k = (iy-ix)>>20;
-	if(k > 60) z=pi_o_2+0.5*pi_lo; 	/* |y/x| >  2**60 */
-	else if(hx<0&&k<-60) z=0.0; 	/* |y|/x < -2**60 */
-	else z=atan(fabs(y/x));		/* safe to do y/x */
-	switch (m) {
-	    case 0: return       z  ;	/* atan(+,+) */
-	    case 1: {
-	    	      __uint32_t zh;
-		      GET_HIGH_WORD(zh,z);
-		      SET_HIGH_WORD(z,zh ^ 0x80000000);
-		    }
-		    return       z  ;	/* atan(-,+) */
-	    case 2: return  pi-(z-pi_lo);/* atan(+,-) */
-	    default: /* case 3 */
-	    	    return  (z-pi_lo)-pi;/* atan(-,-) */
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_atanh.c b/newlib/libm/math/e_atanh.c
deleted file mode 100644
index 58ad325f9..000000000
--- a/newlib/libm/math/e_atanh.c
+++ /dev/null
@@ -1,75 +0,0 @@
-
-/* @(#)e_atanh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_atanh(x)
- * Method :
- *    1.Reduced x to positive by atanh(-x) = -atanh(x)
- *    2.For x>=0.5
- *                  1              2x                          x
- *	atanh(x) = --- * log(1 + -------) = 0.5 * log1p(2 * --------)
- *                  2             1 - x                      1 - x
- *	
- * 	For x<0.5
- *	atanh(x) = 0.5*log1p(2x+2x*x/(1-x))
- *
- * Special cases:
- *	atanh(x) is NaN if |x| > 1 with signal;
- *	atanh(NaN) is that NaN with no signal;
- *	atanh(+-1) is +-INF with signal.
- *
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, huge = 1e300;
-#else
-static double one = 1.0, huge = 1e300;
-#endif
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_atanh(double x)
-#else
-	double __ieee754_atanh(x)
-	double x;
-#endif
-{
-	double t;
-	__int32_t hx,ix;
-	__uint32_t lx;
-	EXTRACT_WORDS(hx,lx,x);
-	ix = hx&0x7fffffff;
-	if ((ix|((lx|(-lx))>>31))>0x3ff00000) /* |x|>1 */
-	    return (x-x)/(x-x);
-	if(ix==0x3ff00000) 
-	    return x/zero;
-	if(ix<0x3e300000&&(huge+x)>zero) return x;	/* x<2**-28 */
-	SET_HIGH_WORD(x,ix);
-	if(ix<0x3fe00000) {		/* x < 0.5 */
-	    t = x+x;
-	    t = 0.5*log1p(t+t*x/(one-x));
-	} else 
-	    t = 0.5*log1p((x+x)/(one-x));
-	if(hx>=0) return t; else return -t;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_cosh.c b/newlib/libm/math/e_cosh.c
deleted file mode 100644
index a6310bd07..000000000
--- a/newlib/libm/math/e_cosh.c
+++ /dev/null
@@ -1,93 +0,0 @@
-
-/* @(#)e_cosh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_cosh(x)
- * Method : 
- * mathematically cosh(x) if defined to be (exp(x)+exp(-x))/2
- *	1. Replace x by |x| (cosh(x) = cosh(-x)). 
- *	2. 
- *		                                        [ exp(x) - 1 ]^2 
- *	    0        <= x <= ln2/2  :  cosh(x) := 1 + -------------------
- *			       			           2*exp(x)
- *
- *		                                  exp(x) +  1/exp(x)
- *	    ln2/2    <= x <= 22     :  cosh(x) := -------------------
- *			       			          2
- *	    22       <= x <= lnovft :  cosh(x) := exp(x)/2 
- *	    lnovft   <= x <= ln2ovft:  cosh(x) := exp(x/2)/2 * exp(x/2)
- *	    ln2ovft  <  x	    :  cosh(x) := huge*huge (overflow)
- *
- * Special cases:
- *	cosh(x) is |x| if x is +INF, -INF, or NaN.
- *	only cosh(0)=1 is exact for finite x.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, half=0.5, huge = 1.0e300;
-#else
-static double one = 1.0, half=0.5, huge = 1.0e300;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_cosh(double x)
-#else
-	double __ieee754_cosh(x)
-	double x;
-#endif
-{	
-	double t,w;
-	__int32_t ix;
-	__uint32_t lx;
-
-    /* High word of |x|. */
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-    /* x is INF or NaN */
-	if(ix>=0x7ff00000) return x*x;	
-
-    /* |x| in [0,0.5*ln2], return 1+expm1(|x|)^2/(2*exp(|x|)) */
-	if(ix<0x3fd62e43) {
-	    t = expm1(fabs(x));
-	    w = one+t;
-	    if (ix<0x3c800000) return w;	/* cosh(tiny) = 1 */
-	    return one+(t*t)/(w+w);
-	}
-
-    /* |x| in [0.5*ln2,22], return (exp(|x|)+1/exp(|x|)/2; */
-	if (ix < 0x40360000) {
-		t = __ieee754_exp(fabs(x));
-		return half*t+half/t;
-	}
-
-    /* |x| in [22, log(maxdouble)] return half*exp(|x|) */
-	if (ix < 0x40862E42)  return half*__ieee754_exp(fabs(x));
-
-    /* |x| in [log(maxdouble), overflowthresold] */
-	GET_LOW_WORD(lx,x);
-	if (ix<0x408633CE || 
-             (ix==0x408633ce && lx<=(__uint32_t)0x8fb9f87d)) {
-	    w = __ieee754_exp(half*fabs(x));
-	    t = half*w;
-	    return t*w;
-	}
-
-    /* |x| > overflowthresold, cosh(x) overflow */
-	return huge*huge;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_exp.c b/newlib/libm/math/e_exp.c
deleted file mode 100644
index ce093c610..000000000
--- a/newlib/libm/math/e_exp.c
+++ /dev/null
@@ -1,167 +0,0 @@
-
-/* @(#)e_exp.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_exp(x)
- * Returns the exponential of x.
- *
- * Method
- *   1. Argument reduction:
- *      Reduce x to an r so that |r| <= 0.5*ln2 ~ 0.34658.
- *	Given x, find r and integer k such that
- *
- *               x = k*ln2 + r,  |r| <= 0.5*ln2.  
- *
- *      Here r will be represented as r = hi-lo for better 
- *	accuracy.
- *
- *   2. Approximation of exp(r) by a special rational function on
- *	the interval [0,0.34658]:
- *	Write
- *	    R(r**2) = r*(exp(r)+1)/(exp(r)-1) = 2 + r*r/6 - r**4/360 + ...
- *      We use a special Reme algorithm on [0,0.34658] to generate 
- * 	a polynomial of degree 5 to approximate R. The maximum error 
- *	of this polynomial approximation is bounded by 2**-59. In
- *	other words,
- *	    R(z) ~ 2.0 + P1*z + P2*z**2 + P3*z**3 + P4*z**4 + P5*z**5
- *  	(where z=r*r, and the values of P1 to P5 are listed below)
- *	and
- *	    |                  5          |     -59
- *	    | 2.0+P1*z+...+P5*z   -  R(z) | <= 2 
- *	    |                             |
- *	The computation of exp(r) thus becomes
- *                             2*r
- *		exp(r) = 1 + -------
- *		              R - r
- *                                 r*R1(r)	
- *		       = 1 + r + ----------- (for better accuracy)
- *		                  2 - R1(r)
- *	where
- *			         2       4             10
- *		R1(r) = r - (P1*r  + P2*r  + ... + P5*r   ).
- *	
- *   3. Scale back to obtain exp(x):
- *	From step 1, we have
- *	   exp(x) = 2^k * exp(r)
- *
- * Special cases:
- *	exp(INF) is INF, exp(NaN) is NaN;
- *	exp(-INF) is 0, and
- *	for finite argument, only exp(0)=1 is exact.
- *
- * Accuracy:
- *	according to an error analysis, the error is always less than
- *	1 ulp (unit in the last place).
- *
- * Misc. info.
- *	For IEEE double 
- *	    if x >  7.09782712893383973096e+02 then exp(x) overflow
- *	    if x < -7.45133219101941108420e+02 then exp(x) underflow
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-one	= 1.0,
-halF[2]	= {0.5,-0.5,},
-huge	= 1.0e+300,
-twom1000= 9.33263618503218878990e-302,     /* 2**-1000=0x01700000,0*/
-o_threshold=  7.09782712893383973096e+02,  /* 0x40862E42, 0xFEFA39EF */
-u_threshold= -7.45133219101941108420e+02,  /* 0xc0874910, 0xD52D3051 */
-ln2HI[2]   ={ 6.93147180369123816490e-01,  /* 0x3fe62e42, 0xfee00000 */
-	     -6.93147180369123816490e-01,},/* 0xbfe62e42, 0xfee00000 */
-ln2LO[2]   ={ 1.90821492927058770002e-10,  /* 0x3dea39ef, 0x35793c76 */
-	     -1.90821492927058770002e-10,},/* 0xbdea39ef, 0x35793c76 */
-invln2 =  1.44269504088896338700e+00, /* 0x3ff71547, 0x652b82fe */
-P1   =  1.66666666666666019037e-01, /* 0x3FC55555, 0x5555553E */
-P2   = -2.77777777770155933842e-03, /* 0xBF66C16C, 0x16BEBD93 */
-P3   =  6.61375632143793436117e-05, /* 0x3F11566A, 0xAF25DE2C */
-P4   = -1.65339022054652515390e-06, /* 0xBEBBBD41, 0xC5D26BF1 */
-P5   =  4.13813679705723846039e-08; /* 0x3E663769, 0x72BEA4D0 */
-
-
-#ifdef __STDC__
-	double __ieee754_exp(double x)	/* default IEEE double exp */
-#else
-	double __ieee754_exp(x)	/* default IEEE double exp */
-	double x;
-#endif
-{
-	double y,hi,lo,c,t;
-	__int32_t k,xsb;
-	__uint32_t hx;
-
-	GET_HIGH_WORD(hx,x);
-	xsb = (hx>>31)&1;		/* sign bit of x */
-	hx &= 0x7fffffff;		/* high word of |x| */
-
-    /* filter out non-finite argument */
-	if(hx >= 0x40862E42) {			/* if |x|>=709.78... */
-            if(hx>=0x7ff00000) {
-	        __uint32_t lx;
-		GET_LOW_WORD(lx,x);
-		if(((hx&0xfffff)|lx)!=0) 
-		     return x+x; 		/* NaN */
-		else return (xsb==0)? x:0.0;	/* exp(+-inf)={inf,0} */
-	    }
-	    if(x > o_threshold) return huge*huge; /* overflow */
-	    if(x < u_threshold) return twom1000*twom1000; /* underflow */
-	}
-
-    /* argument reduction */
-	if(hx > 0x3fd62e42) {		/* if  |x| > 0.5 ln2 */ 
-	    if(hx < 0x3FF0A2B2) {	/* and |x| < 1.5 ln2 */
-		hi = x-ln2HI[xsb]; lo=ln2LO[xsb]; k = 1-xsb-xsb;
-	    } else {
-		k  = invln2*x+halF[xsb];
-		t  = k;
-		hi = x - t*ln2HI[0];	/* t*ln2HI is exact here */
-		lo = t*ln2LO[0];
-	    }
-	    x  = hi - lo;
-	} 
-	else if(hx < 0x3e300000)  {	/* when |x|<2**-28 */
-	    if(huge+x>one) return one+x;/* trigger inexact */
-	}
-	else k = 0;
-
-    /* x is now in primary range */
-	t  = x*x;
-	c  = x - t*(P1+t*(P2+t*(P3+t*(P4+t*P5))));
-	if(k==0) 	return one-((x*c)/(c-2.0)-x); 
-	else 		y = one-((lo-(x*c)/(2.0-c))-hi);
-	if(k >= -1021) {
-	    __uint32_t hy;
-	    GET_HIGH_WORD(hy,y);
-	    SET_HIGH_WORD(y,hy+(k<<20));	/* add k to y's exponent */
-	    return y;
-	} else {
-	    __uint32_t hy;
-	    GET_HIGH_WORD(hy,y);
-	    SET_HIGH_WORD(y,hy+((k+1000)<<20));	/* add k to y's exponent */
-	    return y*twom1000;
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_fmod.c b/newlib/libm/math/e_fmod.c
deleted file mode 100644
index f9739eec2..000000000
--- a/newlib/libm/math/e_fmod.c
+++ /dev/null
@@ -1,140 +0,0 @@
-
-/* @(#)e_fmod.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * __ieee754_fmod(x,y)
- * Return x mod y in exact arithmetic
- * Method: shift and subtract
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, Zero[] = {0.0, -0.0,};
-#else
-static double one = 1.0, Zero[] = {0.0, -0.0,};
-#endif
-
-#ifdef __STDC__
-	double __ieee754_fmod(double x, double y)
-#else
-	double __ieee754_fmod(x,y)
-	double x,y ;
-#endif
-{
-	__int32_t n,hx,hy,hz,ix,iy,sx,i;
-	__uint32_t lx,ly,lz;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hy,ly,y);
-	sx = hx&0x80000000;		/* sign of x */
-	hx ^=sx;		/* |x| */
-	hy &= 0x7fffffff;	/* |y| */
-
-    /* purge off exception values */
-	if((hy|ly)==0||(hx>=0x7ff00000)||	/* y=0,or x not finite */
-	  ((hy|((ly|-ly)>>31))>0x7ff00000))	/* or y is NaN */
-	    return (x*y)/(x*y);
-	if(hx<=hy) {
-	    if((hx<hy)||(lx<ly)) return x;	/* |x|<|y| return x */
-	    if(lx==ly) 
-		return Zero[(__uint32_t)sx>>31];	/* |x|=|y| return x*0*/
-	}
-
-    /* determine ix = ilogb(x) */
-	if(hx<0x00100000) {	/* subnormal x */
-	    if(hx==0) {
-		for (ix = -1043, i=lx; i>0; i<<=1) ix -=1;
-	    } else {
-		for (ix = -1022,i=(hx<<11); i>0; i<<=1) ix -=1;
-	    }
-	} else ix = (hx>>20)-1023;
-
-    /* determine iy = ilogb(y) */
-	if(hy<0x00100000) {	/* subnormal y */
-	    if(hy==0) {
-		for (iy = -1043, i=ly; i>0; i<<=1) iy -=1;
-	    } else {
-		for (iy = -1022,i=(hy<<11); i>0; i<<=1) iy -=1;
-	    }
-	} else iy = (hy>>20)-1023;
-
-    /* set up {hx,lx}, {hy,ly} and align y to x */
-	if(ix >= -1022) 
-	    hx = 0x00100000|(0x000fffff&hx);
-	else {		/* subnormal x, shift x to normal */
-	    n = -1022-ix;
-	    if(n<=31) {
-	        hx = (hx<<n)|(lx>>(32-n));
-	        lx <<= n;
-	    } else {
-		hx = lx<<(n-32);
-		lx = 0;
-	    }
-	}
-	if(iy >= -1022) 
-	    hy = 0x00100000|(0x000fffff&hy);
-	else {		/* subnormal y, shift y to normal */
-	    n = -1022-iy;
-	    if(n<=31) {
-	        hy = (hy<<n)|(ly>>(32-n));
-	        ly <<= n;
-	    } else {
-		hy = ly<<(n-32);
-		ly = 0;
-	    }
-	}
-
-    /* fix point fmod */
-	n = ix - iy;
-	while(n--) {
-	    hz=hx-hy;lz=lx-ly; if(lx<ly) hz -= 1;
-	    if(hz<0){hx = hx+hx+(lx>>31); lx = lx+lx;}
-	    else {
-	    	if((hz|lz)==0) 		/* return sign(x)*0 */
-		    return Zero[(__uint32_t)sx>>31];
-	    	hx = hz+hz+(lz>>31); lx = lz+lz;
-	    }
-	}
-	hz=hx-hy;lz=lx-ly; if(lx<ly) hz -= 1;
-	if(hz>=0) {hx=hz;lx=lz;}
-
-    /* convert back to floating value and restore the sign */
-	if((hx|lx)==0) 			/* return sign(x)*0 */
-	    return Zero[(__uint32_t)sx>>31];	
-	while(hx<0x00100000) {		/* normalize x */
-	    hx = hx+hx+(lx>>31); lx = lx+lx;
-	    iy -= 1;
-	}
-	if(iy>= -1022) {	/* normalize output */
-	    hx = ((hx-0x00100000)|((iy+1023)<<20));
-	    INSERT_WORDS(x,hx|sx,lx);
-	} else {		/* subnormal output */
-	    n = -1022 - iy;
-	    if(n<=20) {
-		lx = (lx>>n)|((__uint32_t)hx<<(32-n));
-		hx >>= n;
-	    } else if (n<=31) {
-		lx = (hx<<(32-n))|(lx>>n); hx = sx;
-	    } else {
-		lx = hx>>(n-32); hx = sx;
-	    }
-	    INSERT_WORDS(x,hx|sx,lx);
-	    x *= one;		/* create necessary signal */
-	}
-	return x;		/* exact output */
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_hypot.c b/newlib/libm/math/e_hypot.c
deleted file mode 100644
index 03f7f51e5..000000000
--- a/newlib/libm/math/e_hypot.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-/* @(#)e_hypot.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_hypot(x,y)
- *
- * Method :                  
- *	If (assume round-to-nearest) z=x*x+y*y 
- *	has error less than sqrt(2)/2 ulp, than 
- *	sqrt(z) has error less than 1 ulp (exercise).
- *
- *	So, compute sqrt(x*x+y*y) with some care as 
- *	follows to get the error below 1 ulp:
- *
- *	Assume x>y>0;
- *	(if possible, set rounding to round-to-nearest)
- *	1. if x > 2y  use
- *		x1*x1+(y*y+(x2*(x+x1))) for x*x+y*y
- *	where x1 = x with lower 32 bits cleared, x2 = x-x1; else
- *	2. if x <= 2y use
- *		t1*y1+((x-y)*(x-y)+(t1*y2+t2*y))
- *	where t1 = 2x with lower 32 bits cleared, t2 = 2x-t1, 
- *	y1= y with lower 32 bits chopped, y2 = y-y1.
- *		
- *	NOTE: scaling may be necessary if some argument is too 
- *	      large or too tiny
- *
- * Special cases:
- *	hypot(x,y) is INF if x or y is +INF or -INF; else
- *	hypot(x,y) is NAN if x or y is NAN.
- *
- * Accuracy:
- * 	hypot(x,y) returns sqrt(x^2+y^2) with error less 
- * 	than 1 ulps (units in the last place) 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double __ieee754_hypot(double x, double y)
-#else
-	double __ieee754_hypot(x,y)
-	double x, y;
-#endif
-{
-	double a=x,b=y,t1,t2,y1,y2,w;
-	__int32_t j,k,ha,hb;
-
-	GET_HIGH_WORD(ha,x);
-	ha &= 0x7fffffff;
-	GET_HIGH_WORD(hb,y);
-	hb &= 0x7fffffff;
-	if(hb > ha) {a=y;b=x;j=ha; ha=hb;hb=j;} else {a=x;b=y;}
-	SET_HIGH_WORD(a,ha);	/* a <- |a| */
-	SET_HIGH_WORD(b,hb);	/* b <- |b| */
-	if((ha-hb)>0x3c00000) {return a+b;} /* x/y > 2**60 */
-	k=0;
-	if(ha > 0x5f300000) {	/* a>2**500 */
-	   if(ha >= 0x7ff00000) {	/* Inf or NaN */
-	       __uint32_t low;
-	       w = a+b;			/* for sNaN */
-	       GET_LOW_WORD(low,a);
-	       if(((ha&0xfffff)|low)==0) w = a;
-	       GET_LOW_WORD(low,b);
-	       if(((hb^0x7ff00000)|low)==0) w = b;
-	       return w;
-	   }
-	   /* scale a and b by 2**-600 */
-	   ha -= 0x25800000; hb -= 0x25800000;	k += 600;
-	   SET_HIGH_WORD(a,ha);
-	   SET_HIGH_WORD(b,hb);
-	}
-	if(hb < 0x20b00000) {	/* b < 2**-500 */
-	    if(hb <= 0x000fffff) {	/* subnormal b or 0 */	
-	        __uint32_t low;
-		GET_LOW_WORD(low,b);
-		if((hb|low)==0) return a;
-		t1=0;
-		SET_HIGH_WORD(t1,0x7fd00000);	/* t1=2^1022 */
-		b *= t1;
-		a *= t1;
-		k -= 1022;
-	    } else {		/* scale a and b by 2^600 */
-	        ha += 0x25800000; 	/* a *= 2^600 */
-		hb += 0x25800000;	/* b *= 2^600 */
-		k -= 600;
-		SET_HIGH_WORD(a,ha);
-		SET_HIGH_WORD(b,hb);
-	    }
-	}
-    /* medium size a and b */
-	w = a-b;
-	if (w>b) {
-	    t1 = 0;
-	    SET_HIGH_WORD(t1,ha);
-	    t2 = a-t1;
-	    w  = __ieee754_sqrt(t1*t1-(b*(-b)-t2*(a+t1)));
-	} else {
-	    a  = a+a;
-	    y1 = 0;
-	    SET_HIGH_WORD(y1,hb);
-	    y2 = b - y1;
-	    t1 = 0;
-	    SET_HIGH_WORD(t1,ha+0x00100000);
-	    t2 = a - t1;
-	    w  = __ieee754_sqrt(t1*y1-(w*(-w)-(t1*y2+t2*b)));
-	}
-	if(k!=0) {
-	    __uint32_t high;
-	    t1 = 1.0;
-	    GET_HIGH_WORD(high,t1);
-	    SET_HIGH_WORD(t1,high+(k<<20));
-	    return t1*w;
-	} else return w;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_j0.c b/newlib/libm/math/e_j0.c
deleted file mode 100644
index 13773cbf9..000000000
--- a/newlib/libm/math/e_j0.c
+++ /dev/null
@@ -1,487 +0,0 @@
-
-/* @(#)e_j0.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_j0(x), __ieee754_y0(x)
- * Bessel function of the first and second kinds of order zero.
- * Method -- j0(x):
- *	1. For tiny x, we use j0(x) = 1 - x^2/4 + x^4/64 - ...
- *	2. Reduce x to |x| since j0(x)=j0(-x),  and
- *	   for x in (0,2)
- *		j0(x) = 1-z/4+ z^2*R0/S0,  where z = x*x;
- *	   (precision:  |j0-1+z/4-z^2R0/S0 |<2**-63.67 )
- *	   for x in (2,inf)
- * 		j0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)-q0(x)*sin(x0))
- * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
- *	   as follow:
- *		cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
- *			= 1/sqrt(2) * (cos(x) + sin(x))
- *		sin(x0) = sin(x)cos(pi/4)-cos(x)sin(pi/4)
- *			= 1/sqrt(2) * (sin(x) - cos(x))
- * 	   (To avoid cancellation, use
- *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
- * 	    to compute the worse one.)
- *	   
- *	3 Special cases
- *		j0(nan)= nan
- *		j0(0) = 1
- *		j0(inf) = 0
- *		
- * Method -- y0(x):
- *	1. For x<2.
- *	   Since 
- *		y0(x) = 2/pi*(j0(x)*(ln(x/2)+Euler) + x^2/4 - ...)
- *	   therefore y0(x)-2/pi*j0(x)*ln(x) is an even function.
- *	   We use the following function to approximate y0,
- *		y0(x) = U(z)/V(z) + (2/pi)*(j0(x)*ln(x)), z= x^2
- *	   where 
- *		U(z) = u00 + u01*z + ... + u06*z^6
- *		V(z) = 1  + v01*z + ... + v04*z^4
- *	   with absolute approximation error bounded by 2**-72.
- *	   Note: For tiny x, U/V = u0 and j0(x)~1, hence
- *		y0(tiny) = u0 + (2/pi)*ln(tiny), (choose tiny<2**-27)
- *	2. For x>=2.
- * 		y0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)+q0(x)*sin(x0))
- * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
- *	   by the method mentioned above.
- *	3. Special cases: y0(0)=-inf, y0(x<0)=NaN, y0(inf)=0.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static double pzero(double), qzero(double);
-#else
-static double pzero(), qzero();
-#endif
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-huge 	= 1e300,
-one	= 1.0,
-invsqrtpi=  5.64189583547756279280e-01, /* 0x3FE20DD7, 0x50429B6D */
-tpi      =  6.36619772367581382433e-01, /* 0x3FE45F30, 0x6DC9C883 */
- 		/* R0/S0 on [0, 2.00] */
-R02  =  1.56249999999999947958e-02, /* 0x3F8FFFFF, 0xFFFFFFFD */
-R03  = -1.89979294238854721751e-04, /* 0xBF28E6A5, 0xB61AC6E9 */
-R04  =  1.82954049532700665670e-06, /* 0x3EBEB1D1, 0x0C503919 */
-R05  = -4.61832688532103189199e-09, /* 0xBE33D5E7, 0x73D63FCE */
-S01  =  1.56191029464890010492e-02, /* 0x3F8FFCE8, 0x82C8C2A4 */
-S02  =  1.16926784663337450260e-04, /* 0x3F1EA6D2, 0xDD57DBF4 */
-S03  =  5.13546550207318111446e-07, /* 0x3EA13B54, 0xCE84D5A9 */
-S04  =  1.16614003333790000205e-09; /* 0x3E1408BC, 0xF4745D8F */
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_j0(double x) 
-#else
-	double __ieee754_j0(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,r,u,v;
-	__int32_t hx,ix;
-
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return one/(x*x);
-	x = fabs(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sin(x);
-		c = cos(x);
-		ss = s-c;
-		cc = s+c;
-		if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-		    z = -cos(x+x);
-		    if ((s*c)<zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x48000000) z = (invsqrtpi*cc)/__ieee754_sqrt(x);
-		else {
-		    u = pzero(x); v = qzero(x);
-		    z = invsqrtpi*(u*cc-v*ss)/__ieee754_sqrt(x);
-		}
-		return z;
-	}
-	if(ix<0x3f200000) {	/* |x| < 2**-13 */
-	    if(huge+x>one) {	/* raise inexact if x != 0 */
-	        if(ix<0x3e400000) return one;	/* |x|<2**-27 */
-	        else 	      return one - 0.25*x*x;
-	    }
-	}
-	z = x*x;
-	r =  z*(R02+z*(R03+z*(R04+z*R05)));
-	s =  one+z*(S01+z*(S02+z*(S03+z*S04)));
-	if(ix < 0x3FF00000) {	/* |x| < 1.00 */
-	    return one + z*(-0.25+(r/s));
-	} else {
-	    u = 0.5*x;
-	    return((one+u)*(one-u)+z*(r/s));
-	}
-}
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-u00  = -7.38042951086872317523e-02, /* 0xBFB2E4D6, 0x99CBD01F */
-u01  =  1.76666452509181115538e-01, /* 0x3FC69D01, 0x9DE9E3FC */
-u02  = -1.38185671945596898896e-02, /* 0xBF8C4CE8, 0xB16CFA97 */
-u03  =  3.47453432093683650238e-04, /* 0x3F36C54D, 0x20B29B6B */
-u04  = -3.81407053724364161125e-06, /* 0xBECFFEA7, 0x73D25CAD */
-u05  =  1.95590137035022920206e-08, /* 0x3E550057, 0x3B4EABD4 */
-u06  = -3.98205194132103398453e-11, /* 0xBDC5E43D, 0x693FB3C8 */
-v01  =  1.27304834834123699328e-02, /* 0x3F8A1270, 0x91C9C71A */
-v02  =  7.60068627350353253702e-05, /* 0x3F13ECBB, 0xF578C6C1 */
-v03  =  2.59150851840457805467e-07, /* 0x3E91642D, 0x7FF202FD */
-v04  =  4.41110311332675467403e-10; /* 0x3DFE5018, 0x3BD6D9EF */
-
-#ifdef __STDC__
-	double __ieee754_y0(double x) 
-#else
-	double __ieee754_y0(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,u,v;
-	__int32_t hx,ix,lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-        ix = 0x7fffffff&hx;
-    /* Y0(NaN) is NaN, y0(-inf) is Nan, y0(inf) is 0  */
-	if(ix>=0x7ff00000) return  one/(x+x*x); 
-        if((ix|lx)==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-        /* y0(x) = sqrt(2/(pi*x))*(p0(x)*sin(x0)+q0(x)*cos(x0))
-         * where x0 = x-pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
-         *                      =  1/sqrt(2) * (sin(x) + cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                s = sin(x);
-                c = cos(x);
-                ss = s-c;
-                cc = s+c;
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-                if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-                    z = -cos(x+x);
-                    if ((s*c)<zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-                if(ix>0x48000000) z = (invsqrtpi*ss)/__ieee754_sqrt(x);
-                else {
-                    u = pzero(x); v = qzero(x);
-                    z = invsqrtpi*(u*ss+v*cc)/__ieee754_sqrt(x);
-                }
-                return z;
-	}
-	if(ix<=0x3e400000) {	/* x < 2**-27 */
-	    return(u00 + tpi*__ieee754_log(x));
-	}
-	z = x*x;
-	u = u00+z*(u01+z*(u02+z*(u03+z*(u04+z*(u05+z*u06)))));
-	v = one+z*(v01+z*(v02+z*(v03+z*v04)));
-	return(u/v + tpi*(__ieee754_j0(x)*__ieee754_log(x)));
-}
-
-/* The asymptotic expansions of pzero is
- *	1 - 9/128 s^2 + 11025/98304 s^4 - ...,	where s = 1/x.
- * For x >= 2, We approximate pzero by
- * 	pzero(x) = 1 + (R/S)
- * where  R = pR0 + pR1*s^2 + pR2*s^4 + ... + pR5*s^10
- * 	  S = 1 + pS0*s^2 + ... + pS4*s^10
- * and
- *	| pzero(x)-1-R/S | <= 2  ** ( -60.26)
- */
-#ifdef __STDC__
-static const double pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
- -7.03124999999900357484e-02, /* 0xBFB1FFFF, 0xFFFFFD32 */
- -8.08167041275349795626e+00, /* 0xC02029D0, 0xB44FA779 */
- -2.57063105679704847262e+02, /* 0xC0701102, 0x7B19E863 */
- -2.48521641009428822144e+03, /* 0xC0A36A6E, 0xCD4DCAFC */
- -5.25304380490729545272e+03, /* 0xC0B4850B, 0x36CC643D */
-};
-#ifdef __STDC__
-static const double pS8[5] = {
-#else
-static double pS8[5] = {
-#endif
-  1.16534364619668181717e+02, /* 0x405D2233, 0x07A96751 */
-  3.83374475364121826715e+03, /* 0x40ADF37D, 0x50596938 */
-  4.05978572648472545552e+04, /* 0x40E3D2BB, 0x6EB6B05F */
-  1.16752972564375915681e+05, /* 0x40FC810F, 0x8F9FA9BD */
-  4.76277284146730962675e+04, /* 0x40E74177, 0x4F2C49DC */
-};
-
-#ifdef __STDC__
-static const double pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -1.14125464691894502584e-11, /* 0xBDA918B1, 0x47E495CC */
- -7.03124940873599280078e-02, /* 0xBFB1FFFF, 0xE69AFBC6 */
- -4.15961064470587782438e+00, /* 0xC010A370, 0xF90C6BBF */
- -6.76747652265167261021e+01, /* 0xC050EB2F, 0x5A7D1783 */
- -3.31231299649172967747e+02, /* 0xC074B3B3, 0x6742CC63 */
- -3.46433388365604912451e+02, /* 0xC075A6EF, 0x28A38BD7 */
-};
-#ifdef __STDC__
-static const double pS5[5] = {
-#else
-static double pS5[5] = {
-#endif
-  6.07539382692300335975e+01, /* 0x404E6081, 0x0C98C5DE */
-  1.05125230595704579173e+03, /* 0x40906D02, 0x5C7E2864 */
-  5.97897094333855784498e+03, /* 0x40B75AF8, 0x8FBE1D60 */
-  9.62544514357774460223e+03, /* 0x40C2CCB8, 0xFA76FA38 */
-  2.40605815922939109441e+03, /* 0x40A2CC1D, 0xC70BE864 */
-};
-
-#ifdef __STDC__
-static const double pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static double pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -2.54704601771951915620e-09, /* 0xBE25E103, 0x6FE1AA86 */
- -7.03119616381481654654e-02, /* 0xBFB1FFF6, 0xF7C0E24B */
- -2.40903221549529611423e+00, /* 0xC00345B2, 0xAEA48074 */
- -2.19659774734883086467e+01, /* 0xC035F74A, 0x4CB94E14 */
- -5.80791704701737572236e+01, /* 0xC04D0A22, 0x420A1A45 */
- -3.14479470594888503854e+01, /* 0xC03F72AC, 0xA892D80F */
-};
-#ifdef __STDC__
-static const double pS3[5] = {
-#else
-static double pS3[5] = {
-#endif
-  3.58560338055209726349e+01, /* 0x4041ED92, 0x84077DD3 */
-  3.61513983050303863820e+02, /* 0x40769839, 0x464A7C0E */
-  1.19360783792111533330e+03, /* 0x4092A66E, 0x6D1061D6 */
-  1.12799679856907414432e+03, /* 0x40919FFC, 0xB8C39B7E */
-  1.73580930813335754692e+02, /* 0x4065B296, 0xFC379081 */
-};
-
-#ifdef __STDC__
-static const double pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -8.87534333032526411254e-08, /* 0xBE77D316, 0xE927026D */
- -7.03030995483624743247e-02, /* 0xBFB1FF62, 0x495E1E42 */
- -1.45073846780952986357e+00, /* 0xBFF73639, 0x8A24A843 */
- -7.63569613823527770791e+00, /* 0xC01E8AF3, 0xEDAFA7F3 */
- -1.11931668860356747786e+01, /* 0xC02662E6, 0xC5246303 */
- -3.23364579351335335033e+00, /* 0xC009DE81, 0xAF8FE70F */
-};
-#ifdef __STDC__
-static const double pS2[5] = {
-#else
-static double pS2[5] = {
-#endif
-  2.22202997532088808441e+01, /* 0x40363865, 0x908B5959 */
-  1.36206794218215208048e+02, /* 0x4061069E, 0x0EE8878F */
-  2.70470278658083486789e+02, /* 0x4070E786, 0x42EA079B */
-  1.53875394208320329881e+02, /* 0x40633C03, 0x3AB6FAFF */
-  1.46576176948256193810e+01, /* 0x402D50B3, 0x44391809 */
-};
-
-#ifdef __STDC__
-	static double pzero(double x)
-#else
-	static double pzero(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double z,r,s;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = pR8; q= pS8;}
-	else if(ix>=0x40122E8B){p = pR5; q= pS5;}
-	else if(ix>=0x4006DB6D){p = pR3; q= pS3;}
-      else {p = pR2; q= pS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-	return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qzero is
- *	-1/8 s + 75/1024 s^3 - ..., where s = 1/x.
- * We approximate qzero by
- * 	qzero(x) = s*(-1.25 + (R/S))
- * where  R = qR0 + qR1*s^2 + qR2*s^4 + ... + qR5*s^10
- * 	  S = 1 + qS0*s^2 + ... + qS5*s^12
- * and
- *	| qzero(x)/s +1.25-R/S | <= 2  ** ( -61.22)
- */
-#ifdef __STDC__
-static const double qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
-  7.32421874999935051953e-02, /* 0x3FB2BFFF, 0xFFFFFE2C */
-  1.17682064682252693899e+01, /* 0x40278952, 0x5BB334D6 */
-  5.57673380256401856059e+02, /* 0x40816D63, 0x15301825 */
-  8.85919720756468632317e+03, /* 0x40C14D99, 0x3E18F46D */
-  3.70146267776887834771e+04, /* 0x40E212D4, 0x0E901566 */
-};
-#ifdef __STDC__
-static const double qS8[6] = {
-#else
-static double qS8[6] = {
-#endif
-  1.63776026895689824414e+02, /* 0x406478D5, 0x365B39BC */
-  8.09834494656449805916e+03, /* 0x40BFA258, 0x4E6B0563 */
-  1.42538291419120476348e+05, /* 0x41016652, 0x54D38C3F */
-  8.03309257119514397345e+05, /* 0x412883DA, 0x83A52B43 */
-  8.40501579819060512818e+05, /* 0x4129A66B, 0x28DE0B3D */
- -3.43899293537866615225e+05, /* 0xC114FD6D, 0x2C9530C5 */
-};
-
-#ifdef __STDC__
-static const double qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.84085963594515531381e-11, /* 0x3DB43D8F, 0x29CC8CD9 */
-  7.32421766612684765896e-02, /* 0x3FB2BFFF, 0xD172B04C */
-  5.83563508962056953777e+00, /* 0x401757B0, 0xB9953DD3 */
-  1.35111577286449829671e+02, /* 0x4060E392, 0x0A8788E9 */
-  1.02724376596164097464e+03, /* 0x40900CF9, 0x9DC8C481 */
-  1.98997785864605384631e+03, /* 0x409F17E9, 0x53C6E3A6 */
-};
-#ifdef __STDC__
-static const double qS5[6] = {
-#else
-static double qS5[6] = {
-#endif
-  8.27766102236537761883e+01, /* 0x4054B1B3, 0xFB5E1543 */
-  2.07781416421392987104e+03, /* 0x40A03BA0, 0xDA21C0CE */
-  1.88472887785718085070e+04, /* 0x40D267D2, 0x7B591E6D */
-  5.67511122894947329769e+04, /* 0x40EBB5E3, 0x97E02372 */
-  3.59767538425114471465e+04, /* 0x40E19118, 0x1F7A54A0 */
- -5.35434275601944773371e+03, /* 0xC0B4EA57, 0xBEDBC609 */
-};
-
-#ifdef __STDC__
-static const double qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static double qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  4.37741014089738620906e-09, /* 0x3E32CD03, 0x6ADECB82 */
-  7.32411180042911447163e-02, /* 0x3FB2BFEE, 0x0E8D0842 */
-  3.34423137516170720929e+00, /* 0x400AC0FC, 0x61149CF5 */
-  4.26218440745412650017e+01, /* 0x40454F98, 0x962DAEDD */
-  1.70808091340565596283e+02, /* 0x406559DB, 0xE25EFD1F */
-  1.66733948696651168575e+02, /* 0x4064D77C, 0x81FA21E0 */
-};
-#ifdef __STDC__
-static const double qS3[6] = {
-#else
-static double qS3[6] = {
-#endif
-  4.87588729724587182091e+01, /* 0x40486122, 0xBFE343A6 */
-  7.09689221056606015736e+02, /* 0x40862D83, 0x86544EB3 */
-  3.70414822620111362994e+03, /* 0x40ACF04B, 0xE44DFC63 */
-  6.46042516752568917582e+03, /* 0x40B93C6C, 0xD7C76A28 */
-  2.51633368920368957333e+03, /* 0x40A3A8AA, 0xD94FB1C0 */
- -1.49247451836156386662e+02, /* 0xC062A7EB, 0x201CF40F */
-};
-
-#ifdef __STDC__
-static const double qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.50444444886983272379e-07, /* 0x3E84313B, 0x54F76BDB */
-  7.32234265963079278272e-02, /* 0x3FB2BEC5, 0x3E883E34 */
-  1.99819174093815998816e+00, /* 0x3FFFF897, 0xE727779C */
-  1.44956029347885735348e+01, /* 0x402CFDBF, 0xAAF96FE5 */
-  3.16662317504781540833e+01, /* 0x403FAA8E, 0x29FBDC4A */
-  1.62527075710929267416e+01, /* 0x403040B1, 0x71814BB4 */
-};
-#ifdef __STDC__
-static const double qS2[6] = {
-#else
-static double qS2[6] = {
-#endif
-  3.03655848355219184498e+01, /* 0x403E5D96, 0xF7C07AED */
-  2.69348118608049844624e+02, /* 0x4070D591, 0xE4D14B40 */
-  8.44783757595320139444e+02, /* 0x408A6645, 0x22B3BF22 */
-  8.82935845112488550512e+02, /* 0x408B977C, 0x9C5CC214 */
-  2.12666388511798828631e+02, /* 0x406A9553, 0x0E001365 */
- -5.31095493882666946917e+00, /* 0xC0153E6A, 0xF8B32931 */
-};
-
-#ifdef __STDC__
-	static double qzero(double x)
-#else
-	static double qzero(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double s,r,z;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qR8; q= qS8;}
-	else if(ix>=0x40122E8B){p = qR5; q= qS5;}
-	else if(ix>=0x4006DB6D){p = qR3; q= qS3;}
-      else {p = qR2; q= qS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (-.125 + r/s)/x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_j1.c b/newlib/libm/math/e_j1.c
deleted file mode 100644
index 098eb569e..000000000
--- a/newlib/libm/math/e_j1.c
+++ /dev/null
@@ -1,486 +0,0 @@
-
-/* @(#)e_j1.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_j1(x), __ieee754_y1(x)
- * Bessel function of the first and second kinds of order zero.
- * Method -- j1(x):
- *	1. For tiny x, we use j1(x) = x/2 - x^3/16 + x^5/384 - ...
- *	2. Reduce x to |x| since j1(x)=-j1(-x),  and
- *	   for x in (0,2)
- *		j1(x) = x/2 + x*z*R0/S0,  where z = x*x;
- *	   (precision:  |j1/x - 1/2 - R0/S0 |<2**-61.51 )
- *	   for x in (2,inf)
- * 		j1(x) = sqrt(2/(pi*x))*(p1(x)*cos(x1)-q1(x)*sin(x1))
- * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
- * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
- *	   as follow:
- *		cos(x1) =  cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
- *			=  1/sqrt(2) * (sin(x) - cos(x))
- *		sin(x1) =  sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
- *			= -1/sqrt(2) * (sin(x) + cos(x))
- * 	   (To avoid cancellation, use
- *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
- * 	    to compute the worse one.)
- *	   
- *	3 Special cases
- *		j1(nan)= nan
- *		j1(0) = 0
- *		j1(inf) = 0
- *		
- * Method -- y1(x):
- *	1. screen out x<=0 cases: y1(0)=-inf, y1(x<0)=NaN 
- *	2. For x<2.
- *	   Since 
- *		y1(x) = 2/pi*(j1(x)*(ln(x/2)+Euler)-1/x-x/2+5/64*x^3-...)
- *	   therefore y1(x)-2/pi*j1(x)*ln(x)-1/x is an odd function.
- *	   We use the following function to approximate y1,
- *		y1(x) = x*U(z)/V(z) + (2/pi)*(j1(x)*ln(x)-1/x), z= x^2
- *	   where for x in [0,2] (abs err less than 2**-65.89)
- *		U(z) = U0[0] + U0[1]*z + ... + U0[4]*z^4
- *		V(z) = 1  + v0[0]*z + ... + v0[4]*z^5
- *	   Note: For tiny x, 1/x dominate y1 and hence
- *		y1(tiny) = -2/pi/tiny, (choose tiny<2**-54)
- *	3. For x>=2.
- * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
- * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
- *	   by method mentioned above.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static double pone(double), qone(double);
-#else
-static double pone(), qone();
-#endif
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-huge    = 1e300,
-one	= 1.0,
-invsqrtpi=  5.64189583547756279280e-01, /* 0x3FE20DD7, 0x50429B6D */
-tpi      =  6.36619772367581382433e-01, /* 0x3FE45F30, 0x6DC9C883 */
-	/* R0/S0 on [0,2] */
-r00  = -6.25000000000000000000e-02, /* 0xBFB00000, 0x00000000 */
-r01  =  1.40705666955189706048e-03, /* 0x3F570D9F, 0x98472C61 */
-r02  = -1.59955631084035597520e-05, /* 0xBEF0C5C6, 0xBA169668 */
-r03  =  4.96727999609584448412e-08, /* 0x3E6AAAFA, 0x46CA0BD9 */
-s01  =  1.91537599538363460805e-02, /* 0x3F939D0B, 0x12637E53 */
-s02  =  1.85946785588630915560e-04, /* 0x3F285F56, 0xB9CDF664 */
-s03  =  1.17718464042623683263e-06, /* 0x3EB3BFF8, 0x333F8498 */
-s04  =  5.04636257076217042715e-09, /* 0x3E35AC88, 0xC97DFF2C */
-s05  =  1.23542274426137913908e-11; /* 0x3DAB2ACF, 0xCFB97ED8 */
-
-#ifdef __STDC__
-static const double zero    = 0.0;
-#else
-static double zero    = 0.0;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_j1(double x) 
-#else
-	double __ieee754_j1(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,r,u,v,y;
-	__int32_t hx,ix;
-
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return one/x;
-	y = fabs(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sin(y);
-		c = cos(y);
-		ss = -s-c;
-		cc = s-c;
-		if(ix<0x7fe00000) {  /* make sure y+y not overflow */
-		    z = cos(y+y);
-		    if ((s*c)>zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j1(x) = 1/__ieee754_sqrt(pi) * (P(1,x)*cc - Q(1,x)*ss) / __ieee754_sqrt(x)
-	 * y1(x) = 1/__ieee754_sqrt(pi) * (P(1,x)*ss + Q(1,x)*cc) / __ieee754_sqrt(x)
-	 */
-		if(ix>0x48000000) z = (invsqrtpi*cc)/__ieee754_sqrt(y);
-		else {
-		    u = pone(y); v = qone(y);
-		    z = invsqrtpi*(u*cc-v*ss)/__ieee754_sqrt(y);
-		}
-		if(hx<0) return -z;
-		else  	 return  z;
-	}
-	if(ix<0x3e400000) {	/* |x|<2**-27 */
-	    if(huge+x>one) return 0.5*x;/* inexact if x!=0 necessary */
-	}
-	z = x*x;
-	r =  z*(r00+z*(r01+z*(r02+z*r03)));
-	s =  one+z*(s01+z*(s02+z*(s03+z*(s04+z*s05))));
-	r *= x;
-	return(x*0.5+r/s);
-}
-
-#ifdef __STDC__
-static const double U0[5] = {
-#else
-static double U0[5] = {
-#endif
- -1.96057090646238940668e-01, /* 0xBFC91866, 0x143CBC8A */
-  5.04438716639811282616e-02, /* 0x3FA9D3C7, 0x76292CD1 */
- -1.91256895875763547298e-03, /* 0xBF5F55E5, 0x4844F50F */
-  2.35252600561610495928e-05, /* 0x3EF8AB03, 0x8FA6B88E */
- -9.19099158039878874504e-08, /* 0xBE78AC00, 0x569105B8 */
-};
-#ifdef __STDC__
-static const double V0[5] = {
-#else
-static double V0[5] = {
-#endif
-  1.99167318236649903973e-02, /* 0x3F94650D, 0x3F4DA9F0 */
-  2.02552581025135171496e-04, /* 0x3F2A8C89, 0x6C257764 */
-  1.35608801097516229404e-06, /* 0x3EB6C05A, 0x894E8CA6 */
-  6.22741452364621501295e-09, /* 0x3E3ABF1D, 0x5BA69A86 */
-  1.66559246207992079114e-11, /* 0x3DB25039, 0xDACA772A */
-};
-
-#ifdef __STDC__
-	double __ieee754_y1(double x) 
-#else
-	double __ieee754_y1(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,u,v;
-	__int32_t hx,ix,lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-        ix = 0x7fffffff&hx;
-    /* if Y1(NaN) is NaN, Y1(-inf) is NaN, Y1(inf) is 0 */
-	if(ix>=0x7ff00000) return  one/(x+x*x); 
-        if((ix|lx)==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-                s = sin(x);
-                c = cos(x);
-                ss = -s-c;
-                cc = s-c;
-                if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-                    z = cos(x+x);
-                    if ((s*c)>zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-        /* y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x0)+q1(x)*cos(x0))
-         * where x0 = x-3pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      = -1/sqrt(2) * (cos(x) + sin(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                if(ix>0x48000000) z = (invsqrtpi*ss)/__ieee754_sqrt(x);
-                else {
-                    u = pone(x); v = qone(x);
-                    z = invsqrtpi*(u*ss+v*cc)/__ieee754_sqrt(x);
-                }
-                return z;
-        } 
-        if(ix<=0x3c900000) {    /* x < 2**-54 */
-            return(-tpi/x);
-        } 
-        z = x*x;
-        u = U0[0]+z*(U0[1]+z*(U0[2]+z*(U0[3]+z*U0[4])));
-        v = one+z*(V0[0]+z*(V0[1]+z*(V0[2]+z*(V0[3]+z*V0[4]))));
-        return(x*(u/v) + tpi*(__ieee754_j1(x)*__ieee754_log(x)-one/x));
-}
-
-/* For x >= 8, the asymptotic expansions of pone is
- *	1 + 15/128 s^2 - 4725/2^15 s^4 - ...,	where s = 1/x.
- * We approximate pone by
- * 	pone(x) = 1 + (R/S)
- * where  R = pr0 + pr1*s^2 + pr2*s^4 + ... + pr5*s^10
- * 	  S = 1 + ps0*s^2 + ... + ps4*s^10
- * and
- *	| pone(x)-1-R/S | <= 2  ** ( -60.06)
- */
-
-#ifdef __STDC__
-static const double pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
-  1.17187499999988647970e-01, /* 0x3FBDFFFF, 0xFFFFFCCE */
-  1.32394806593073575129e+01, /* 0x402A7A9D, 0x357F7FCE */
-  4.12051854307378562225e+02, /* 0x4079C0D4, 0x652EA590 */
-  3.87474538913960532227e+03, /* 0x40AE457D, 0xA3A532CC */
-  7.91447954031891731574e+03, /* 0x40BEEA7A, 0xC32782DD */
-};
-#ifdef __STDC__
-static const double ps8[5] = {
-#else
-static double ps8[5] = {
-#endif
-  1.14207370375678408436e+02, /* 0x405C8D45, 0x8E656CAC */
-  3.65093083420853463394e+03, /* 0x40AC85DC, 0x964D274F */
-  3.69562060269033463555e+04, /* 0x40E20B86, 0x97C5BB7F */
-  9.76027935934950801311e+04, /* 0x40F7D42C, 0xB28F17BB */
-  3.08042720627888811578e+04, /* 0x40DE1511, 0x697A0B2D */
-};
-
-#ifdef __STDC__
-static const double pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.31990519556243522749e-11, /* 0x3DAD0667, 0xDAE1CA7D */
-  1.17187493190614097638e-01, /* 0x3FBDFFFF, 0xE2C10043 */
-  6.80275127868432871736e+00, /* 0x401B3604, 0x6E6315E3 */
-  1.08308182990189109773e+02, /* 0x405B13B9, 0x452602ED */
-  5.17636139533199752805e+02, /* 0x40802D16, 0xD052D649 */
-  5.28715201363337541807e+02, /* 0x408085B8, 0xBB7E0CB7 */
-};
-#ifdef __STDC__
-static const double ps5[5] = {
-#else
-static double ps5[5] = {
-#endif
-  5.92805987221131331921e+01, /* 0x404DA3EA, 0xA8AF633D */
-  9.91401418733614377743e+02, /* 0x408EFB36, 0x1B066701 */
-  5.35326695291487976647e+03, /* 0x40B4E944, 0x5706B6FB */
-  7.84469031749551231769e+03, /* 0x40BEA4B0, 0xB8A5BB15 */
-  1.50404688810361062679e+03, /* 0x40978030, 0x036F5E51 */
-};
-
-#ifdef __STDC__
-static const double pr3[6] = {
-#else
-static double pr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  3.02503916137373618024e-09, /* 0x3E29FC21, 0xA7AD9EDD */
-  1.17186865567253592491e-01, /* 0x3FBDFFF5, 0x5B21D17B */
-  3.93297750033315640650e+00, /* 0x400F76BC, 0xE85EAD8A */
-  3.51194035591636932736e+01, /* 0x40418F48, 0x9DA6D129 */
-  9.10550110750781271918e+01, /* 0x4056C385, 0x4D2C1837 */
-  4.85590685197364919645e+01, /* 0x4048478F, 0x8EA83EE5 */
-};
-#ifdef __STDC__
-static const double ps3[5] = {
-#else
-static double ps3[5] = {
-#endif
-  3.47913095001251519989e+01, /* 0x40416549, 0xA134069C */
-  3.36762458747825746741e+02, /* 0x40750C33, 0x07F1A75F */
-  1.04687139975775130551e+03, /* 0x40905B7C, 0x5037D523 */
-  8.90811346398256432622e+02, /* 0x408BD67D, 0xA32E31E9 */
-  1.03787932439639277504e+02, /* 0x4059F26D, 0x7C2EED53 */
-};
-
-#ifdef __STDC__
-static const double pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.07710830106873743082e-07, /* 0x3E7CE9D4, 0xF65544F4 */
-  1.17176219462683348094e-01, /* 0x3FBDFF42, 0xBE760D83 */
-  2.36851496667608785174e+00, /* 0x4002F2B7, 0xF98FAEC0 */
-  1.22426109148261232917e+01, /* 0x40287C37, 0x7F71A964 */
-  1.76939711271687727390e+01, /* 0x4031B1A8, 0x177F8EE2 */
-  5.07352312588818499250e+00, /* 0x40144B49, 0xA574C1FE */
-};
-#ifdef __STDC__
-static const double ps2[5] = {
-#else
-static double ps2[5] = {
-#endif
-  2.14364859363821409488e+01, /* 0x40356FBD, 0x8AD5ECDC */
-  1.25290227168402751090e+02, /* 0x405F5293, 0x14F92CD5 */
-  2.32276469057162813669e+02, /* 0x406D08D8, 0xD5A2DBD9 */
-  1.17679373287147100768e+02, /* 0x405D6B7A, 0xDA1884A9 */
-  8.36463893371618283368e+00, /* 0x4020BAB1, 0xF44E5192 */
-};
-
-#ifdef __STDC__
-	static double pone(double x)
-#else
-	static double pone(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double z,r,s;
-        __int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-        if(ix>=0x40200000)     {p = pr8; q= ps8;}
-        else if(ix>=0x40122E8B){p = pr5; q= ps5;}
-        else if(ix>=0x4006DB6D){p = pr3; q= ps3;}
-        else {p = pr2; q= ps2;}
-        z = one/(x*x);
-        r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-        s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-        return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qone is
- *	3/8 s - 105/1024 s^3 - ..., where s = 1/x.
- * We approximate qone by
- * 	qone(x) = s*(0.375 + (R/S))
- * where  R = qr1*s^2 + qr2*s^4 + ... + qr5*s^10
- * 	  S = 1 + qs1*s^2 + ... + qs6*s^12
- * and
- *	| qone(x)/s -0.375-R/S | <= 2  ** ( -61.13)
- */
-
-#ifdef __STDC__
-static const double qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
- -1.02539062499992714161e-01, /* 0xBFBA3FFF, 0xFFFFFDF3 */
- -1.62717534544589987888e+01, /* 0xC0304591, 0xA26779F7 */
- -7.59601722513950107896e+02, /* 0xC087BCD0, 0x53E4B576 */
- -1.18498066702429587167e+04, /* 0xC0C724E7, 0x40F87415 */
- -4.84385124285750353010e+04, /* 0xC0E7A6D0, 0x65D09C6A */
-};
-#ifdef __STDC__
-static const double qs8[6] = {
-#else
-static double qs8[6] = {
-#endif
-  1.61395369700722909556e+02, /* 0x40642CA6, 0xDE5BCDE5 */
-  7.82538599923348465381e+03, /* 0x40BE9162, 0xD0D88419 */
-  1.33875336287249578163e+05, /* 0x4100579A, 0xB0B75E98 */
-  7.19657723683240939863e+05, /* 0x4125F653, 0x72869C19 */
-  6.66601232617776375264e+05, /* 0x412457D2, 0x7719AD5C */
- -2.94490264303834643215e+05, /* 0xC111F969, 0x0EA5AA18 */
-};
-
-#ifdef __STDC__
-static const double qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -2.08979931141764104297e-11, /* 0xBDB6FA43, 0x1AA1A098 */
- -1.02539050241375426231e-01, /* 0xBFBA3FFF, 0xCB597FEF */
- -8.05644828123936029840e+00, /* 0xC0201CE6, 0xCA03AD4B */
- -1.83669607474888380239e+02, /* 0xC066F56D, 0x6CA7B9B0 */
- -1.37319376065508163265e+03, /* 0xC09574C6, 0x6931734F */
- -2.61244440453215656817e+03, /* 0xC0A468E3, 0x88FDA79D */
-};
-#ifdef __STDC__
-static const double qs5[6] = {
-#else
-static double qs5[6] = {
-#endif
-  8.12765501384335777857e+01, /* 0x405451B2, 0xFF5A11B2 */
-  1.99179873460485964642e+03, /* 0x409F1F31, 0xE77BF839 */
-  1.74684851924908907677e+04, /* 0x40D10F1F, 0x0D64CE29 */
-  4.98514270910352279316e+04, /* 0x40E8576D, 0xAABAD197 */
-  2.79480751638918118260e+04, /* 0x40DB4B04, 0xCF7C364B */
- -4.71918354795128470869e+03, /* 0xC0B26F2E, 0xFCFFA004 */
-};
-
-#ifdef __STDC__
-static const double qr3[6] = {
-#else
-static double qr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -5.07831226461766561369e-09, /* 0xBE35CFA9, 0xD38FC84F */
- -1.02537829820837089745e-01, /* 0xBFBA3FEB, 0x51AEED54 */
- -4.61011581139473403113e+00, /* 0xC01270C2, 0x3302D9FF */
- -5.78472216562783643212e+01, /* 0xC04CEC71, 0xC25D16DA */
- -2.28244540737631695038e+02, /* 0xC06C87D3, 0x4718D55F */
- -2.19210128478909325622e+02, /* 0xC06B66B9, 0x5F5C1BF6 */
-};
-#ifdef __STDC__
-static const double qs3[6] = {
-#else
-static double qs3[6] = {
-#endif
-  4.76651550323729509273e+01, /* 0x4047D523, 0xCCD367E4 */
-  6.73865112676699709482e+02, /* 0x40850EEB, 0xC031EE3E */
-  3.38015286679526343505e+03, /* 0x40AA684E, 0x448E7C9A */
-  5.54772909720722782367e+03, /* 0x40B5ABBA, 0xA61D54A6 */
-  1.90311919338810798763e+03, /* 0x409DBC7A, 0x0DD4DF4B */
- -1.35201191444307340817e+02, /* 0xC060E670, 0x290A311F */
-};
-
-#ifdef __STDC__
-static const double qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -1.78381727510958865572e-07, /* 0xBE87F126, 0x44C626D2 */
- -1.02517042607985553460e-01, /* 0xBFBA3E8E, 0x9148B010 */
- -2.75220568278187460720e+00, /* 0xC0060484, 0x69BB4EDA */
- -1.96636162643703720221e+01, /* 0xC033A9E2, 0xC168907F */
- -4.23253133372830490089e+01, /* 0xC04529A3, 0xDE104AAA */
- -2.13719211703704061733e+01, /* 0xC0355F36, 0x39CF6E52 */
-};
-#ifdef __STDC__
-static const double qs2[6] = {
-#else
-static double qs2[6] = {
-#endif
-  2.95333629060523854548e+01, /* 0x403D888A, 0x78AE64FF */
-  2.52981549982190529136e+02, /* 0x406F9F68, 0xDB821CBA */
-  7.57502834868645436472e+02, /* 0x4087AC05, 0xCE49A0F7 */
-  7.39393205320467245656e+02, /* 0x40871B25, 0x48D4C029 */
-  1.55949003336666123687e+02, /* 0x40637E5E, 0x3C3ED8D4 */
- -4.95949898822628210127e+00, /* 0xC013D686, 0xE71BE86B */
-};
-
-#ifdef __STDC__
-	static double qone(double x)
-#else
-	static double qone(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double  s,r,z;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qr8; q= qs8;}
-	else if(ix>=0x40122E8B){p = qr5; q= qs5;}
-	else if(ix>=0x4006DB6D){p = qr3; q= qs3;}
-      else {p = qr2; q= qs2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (.375 + r/s)/x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_jn.c b/newlib/libm/math/e_jn.c
deleted file mode 100644
index 1eea27be0..000000000
--- a/newlib/libm/math/e_jn.c
+++ /dev/null
@@ -1,281 +0,0 @@
-
-/* @(#)e_jn.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * __ieee754_jn(n, x), __ieee754_yn(n, x)
- * floating point Bessel's function of the 1st and 2nd kind
- * of order n
- *          
- * Special cases:
- *	y0(0)=y1(0)=yn(n,0) = -inf with division by zero signal;
- *	y0(-ve)=y1(-ve)=yn(n,-ve) are NaN with invalid signal.
- * Note 2. About jn(n,x), yn(n,x)
- *	For n=0, j0(x) is called,
- *	for n=1, j1(x) is called,
- *	for n<x, forward recursion us used starting
- *	from values of j0(x) and j1(x).
- *	for n>x, a continued fraction approximation to
- *	j(n,x)/j(n-1,x) is evaluated and then backward
- *	recursion is used starting from a supposed value
- *	for j(n,x). The resulting value of j(0,x) is
- *	compared with the actual value to correct the
- *	supposed value of j(n,x).
- *
- *	yn(n,x) is similar in all respects, except
- *	that forward recursion is used for all
- *	values of n>1.
- *	
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-invsqrtpi=  5.64189583547756279280e-01, /* 0x3FE20DD7, 0x50429B6D */
-two   =  2.00000000000000000000e+00, /* 0x40000000, 0x00000000 */
-one   =  1.00000000000000000000e+00; /* 0x3FF00000, 0x00000000 */
-
-#ifdef __STDC__
-static const double zero  =  0.00000000000000000000e+00;
-#else
-static double zero  =  0.00000000000000000000e+00;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_jn(int n, double x)
-#else
-	double __ieee754_jn(n,x)
-	int n; double x;
-#endif
-{
-	__int32_t i,hx,ix,lx, sgn;
-	double a, b, temp, di;
-	double z, w;
-
-    /* J(-n,x) = (-1)^n * J(n, x), J(n, -x) = (-1)^n * J(n, x)
-     * Thus, J(-n,x) = J(n,-x)
-     */
-	EXTRACT_WORDS(hx,lx,x);
-	ix = 0x7fffffff&hx;
-    /* if J(n,NaN) is NaN */
-	if((ix|((__uint32_t)(lx|-lx))>>31)>0x7ff00000) return x+x;
-	if(n<0){		
-		n = -n;
-		x = -x;
-		hx ^= 0x80000000;
-	}
-	if(n==0) return(__ieee754_j0(x));
-	if(n==1) return(__ieee754_j1(x));
-	sgn = (n&1)&(hx>>31);	/* even n -- 0, odd n -- sign(x) */
-	x = fabs(x);
-	if((ix|lx)==0||ix>=0x7ff00000) 	/* if x is 0 or inf */
-	    b = zero;
-	else if((double)n<=x) {   
-		/* Safe to use J(n+1,x)=2n/x *J(n,x)-J(n-1,x) */
-	    if(ix>=0x52D00000) { /* x > 2**302 */
-    /* (x >> n**2) 
-     *	    Jn(x) = cos(x-(2n+1)*pi/4)*sqrt(2/x*pi)
-     *	    Yn(x) = sin(x-(2n+1)*pi/4)*sqrt(2/x*pi)
-     *	    Let s=sin(x), c=cos(x), 
-     *		xn=x-(2n+1)*pi/4, sqt2 = sqrt(2),then
-     *
-     *		   n	sin(xn)*sqt2	cos(xn)*sqt2
-     *		----------------------------------
-     *		   0	 s-c		 c+s
-     *		   1	-s-c 		-c+s
-     *		   2	-s+c		-c-s
-     *		   3	 s+c		 c-s
-     */
-		switch(n&3) {
-		    case 0: temp =  cos(x)+sin(x); break;
-		    case 1: temp = -cos(x)+sin(x); break;
-		    case 2: temp = -cos(x)-sin(x); break;
-		    case 3: temp =  cos(x)-sin(x); break;
-		}
-		b = invsqrtpi*temp/__ieee754_sqrt(x);
-	    } else {	
-	        a = __ieee754_j0(x);
-	        b = __ieee754_j1(x);
-	        for(i=1;i<n;i++){
-		    temp = b;
-		    b = b*((double)(i+i)/x) - a; /* avoid underflow */
-		    a = temp;
-	        }
-	    }
-	} else {
-	    if(ix<0x3e100000) {	/* x < 2**-29 */
-    /* x is tiny, return the first Taylor expansion of J(n,x) 
-     * J(n,x) = 1/n!*(x/2)^n  - ...
-     */
-		if(n>33)	/* underflow */
-		    b = zero;
-		else {
-		    temp = x*0.5; b = temp;
-		    for (a=one,i=2;i<=n;i++) {
-			a *= (double)i;		/* a = n! */
-			b *= temp;		/* b = (x/2)^n */
-		    }
-		    b = b/a;
-		}
-	    } else {
-		/* use backward recurrence */
-		/* 			x      x^2      x^2       
-		 *  J(n,x)/J(n-1,x) =  ----   ------   ------   .....
-		 *			2n  - 2(n+1) - 2(n+2)
-		 *
-		 * 			1      1        1       
-		 *  (for large x)   =  ----  ------   ------   .....
-		 *			2n   2(n+1)   2(n+2)
-		 *			-- - ------ - ------ - 
-		 *			 x     x         x
-		 *
-		 * Let w = 2n/x and h=2/x, then the above quotient
-		 * is equal to the continued fraction:
-		 *		    1
-		 *	= -----------------------
-		 *		       1
-		 *	   w - -----------------
-		 *			  1
-		 * 	        w+h - ---------
-		 *		       w+2h - ...
-		 *
-		 * To determine how many terms needed, let
-		 * Q(0) = w, Q(1) = w(w+h) - 1,
-		 * Q(k) = (w+k*h)*Q(k-1) - Q(k-2),
-		 * When Q(k) > 1e4	good for single 
-		 * When Q(k) > 1e9	good for double 
-		 * When Q(k) > 1e17	good for quadruple 
-		 */
-	    /* determine k */
-		double t,v;
-		double q0,q1,h,tmp; __int32_t k,m;
-		w  = (n+n)/(double)x; h = 2.0/(double)x;
-		q0 = w;  z = w+h; q1 = w*z - 1.0; k=1;
-		while(q1<1.0e9) {
-			k += 1; z += h;
-			tmp = z*q1 - q0;
-			q0 = q1;
-			q1 = tmp;
-		}
-		m = n+n;
-		for(t=zero, i = 2*(n+k); i>=m; i -= 2) t = one/(i/x-t);
-		a = t;
-		b = one;
-		/*  estimate log((2/x)^n*n!) = n*log(2/x)+n*ln(n)
-		 *  Hence, if n*(log(2n/x)) > ...
-		 *  single 8.8722839355e+01
-		 *  double 7.09782712893383973096e+02
-		 *  long double 1.1356523406294143949491931077970765006170e+04
-		 *  then recurrent value may overflow and the result is 
-		 *  likely underflow to zero
-		 */
-		tmp = n;
-		v = two/x;
-		tmp = tmp*__ieee754_log(fabs(v*tmp));
-		if(tmp<7.09782712893383973096e+02) {
-	    	    for(i=n-1,di=(double)(i+i);i>0;i--){
-		        temp = b;
-			b *= di;
-			b  = b/x - a;
-		        a = temp;
-			di -= two;
-	     	    }
-		} else {
-	    	    for(i=n-1,di=(double)(i+i);i>0;i--){
-		        temp = b;
-			b *= di;
-			b  = b/x - a;
-		        a = temp;
-			di -= two;
-		    /* scale b to avoid spurious overflow */
-			if(b>1e100) {
-			    a /= b;
-			    t /= b;
-			    b  = one;
-			}
-	     	    }
-		}
-	    	b = (t*__ieee754_j0(x)/b);
-	    }
-	}
-	if(sgn==1) return -b; else return b;
-}
-
-#ifdef __STDC__
-	double __ieee754_yn(int n, double x) 
-#else
-	double __ieee754_yn(n,x) 
-	int n; double x;
-#endif
-{
-	__int32_t i,hx,ix,lx;
-	__int32_t sign;
-	double a, b, temp;
-
-	EXTRACT_WORDS(hx,lx,x);
-	ix = 0x7fffffff&hx;
-    /* if Y(n,NaN) is NaN */
-	if((ix|((__uint32_t)(lx|-lx))>>31)>0x7ff00000) return x+x;
-	if((ix|lx)==0) return -one/zero;
-	if(hx<0) return zero/zero;
-	sign = 1;
-	if(n<0){
-		n = -n;
-		sign = 1 - ((n&1)<<1);
-	}
-	if(n==0) return(__ieee754_y0(x));
-	if(n==1) return(sign*__ieee754_y1(x));
-	if(ix==0x7ff00000) return zero;
-	if(ix>=0x52D00000) { /* x > 2**302 */
-    /* (x >> n**2) 
-     *	    Jn(x) = cos(x-(2n+1)*pi/4)*sqrt(2/x*pi)
-     *	    Yn(x) = sin(x-(2n+1)*pi/4)*sqrt(2/x*pi)
-     *	    Let s=sin(x), c=cos(x), 
-     *		xn=x-(2n+1)*pi/4, sqt2 = sqrt(2),then
-     *
-     *		   n	sin(xn)*sqt2	cos(xn)*sqt2
-     *		----------------------------------
-     *		   0	 s-c		 c+s
-     *		   1	-s-c 		-c+s
-     *		   2	-s+c		-c-s
-     *		   3	 s+c		 c-s
-     */
-		switch(n&3) {
-		    case 0: temp =  sin(x)-cos(x); break;
-		    case 1: temp = -sin(x)-cos(x); break;
-		    case 2: temp = -sin(x)+cos(x); break;
-		    case 3: temp =  sin(x)+cos(x); break;
-		}
-		b = invsqrtpi*temp/__ieee754_sqrt(x);
-	} else {
-	    __uint32_t high;
-	    a = __ieee754_y0(x);
-	    b = __ieee754_y1(x);
-	/* quit if b is -inf */
-	    GET_HIGH_WORD(high,b);
-	    for(i=1;i<n&&high!=0xfff00000;i++){ 
-		temp = b;
-		b = ((double)(i+i)/x)*b - a;
-		GET_HIGH_WORD(high,b);
-		a = temp;
-	    }
-	}
-	if(sign>0) return b; else return -b;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_log.c b/newlib/libm/math/e_log.c
deleted file mode 100644
index 72cddb2f8..000000000
--- a/newlib/libm/math/e_log.c
+++ /dev/null
@@ -1,146 +0,0 @@
-
-/* @(#)e_log.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_log(x)
- * Return the logrithm of x
- *
- * Method :                  
- *   1. Argument Reduction: find k and f such that 
- *			x = 2^k * (1+f), 
- *	   where  sqrt(2)/2 < 1+f < sqrt(2) .
- *
- *   2. Approximation of log(1+f).
- *	Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
- *		 = 2s + 2/3 s**3 + 2/5 s**5 + .....,
- *	     	 = 2s + s*R
- *      We use a special Reme algorithm on [0,0.1716] to generate 
- * 	a polynomial of degree 14 to approximate R The maximum error 
- *	of this polynomial approximation is bounded by 2**-58.45. In
- *	other words,
- *		        2      4      6      8      10      12      14
- *	    R(z) ~ Lg1*s +Lg2*s +Lg3*s +Lg4*s +Lg5*s  +Lg6*s  +Lg7*s
- *  	(the values of Lg1 to Lg7 are listed in the program)
- *	and
- *	    |      2          14          |     -58.45
- *	    | Lg1*s +...+Lg7*s    -  R(z) | <= 2 
- *	    |                             |
- *	Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
- *	In order to guarantee error in log below 1ulp, we compute log
- *	by
- *		log(1+f) = f - s*(f - R)	(if f is not too large)
- *		log(1+f) = f - (hfsq - s*(hfsq+R)).	(better accuracy)
- *	
- *	3. Finally,  log(x) = k*ln2 + log(1+f).  
- *			    = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
- *	   Here ln2 is split into two floating point number: 
- *			ln2_hi + ln2_lo,
- *	   where n*ln2_hi is always exact for |n| < 2000.
- *
- * Special cases:
- *	log(x) is NaN with signal if x < 0 (including -INF) ; 
- *	log(+INF) is +INF; log(0) is -INF with signal;
- *	log(NaN) is that NaN with no signal.
- *
- * Accuracy:
- *	according to an error analysis, the error is always less than
- *	1 ulp (unit in the last place).
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-ln2_hi  =  6.93147180369123816490e-01,	/* 3fe62e42 fee00000 */
-ln2_lo  =  1.90821492927058770002e-10,	/* 3dea39ef 35793c76 */
-two54   =  1.80143985094819840000e+16,  /* 43500000 00000000 */
-Lg1 = 6.666666666666735130e-01,  /* 3FE55555 55555593 */
-Lg2 = 3.999999999940941908e-01,  /* 3FD99999 9997FA04 */
-Lg3 = 2.857142874366239149e-01,  /* 3FD24924 94229359 */
-Lg4 = 2.222219843214978396e-01,  /* 3FCC71C5 1D8E78AF */
-Lg5 = 1.818357216161805012e-01,  /* 3FC74664 96CB03DE */
-Lg6 = 1.531383769920937332e-01,  /* 3FC39A09 D078C69F */
-Lg7 = 1.479819860511658591e-01;  /* 3FC2F112 DF3E5244 */
-
-#ifdef __STDC__
-static const double zero   =  0.0;
-#else
-static double zero   =  0.0;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_log(double x)
-#else
-	double __ieee754_log(x)
-	double x;
-#endif
-{
-	double hfsq,f,s,z,R,w,t1,t2,dk;
-	__int32_t k,hx,i,j;
-	__uint32_t lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-
-	k=0;
-	if (hx < 0x00100000) {			/* x < 2**-1022  */
-	    if (((hx&0x7fffffff)|lx)==0) 
-		return -two54/zero;		/* log(+-0)=-inf */
-	    if (hx<0) return (x-x)/zero;	/* log(-#) = NaN */
-	    k -= 54; x *= two54; /* subnormal number, scale up x */
-	    GET_HIGH_WORD(hx,x);
-	} 
-	if (hx >= 0x7ff00000) return x+x;
-	k += (hx>>20)-1023;
-	hx &= 0x000fffff;
-	i = (hx+0x95f64)&0x100000;
-	SET_HIGH_WORD(x,hx|(i^0x3ff00000));	/* normalize x or x/2 */
-	k += (i>>20);
-	f = x-1.0;
-	if((0x000fffff&(2+hx))<3) {	/* |f| < 2**-20 */
-          if(f==zero) { if(k==0) return zero;  else {dk=(double)k;
-                               return dk*ln2_hi+dk*ln2_lo;}}
-	    R = f*f*(0.5-0.33333333333333333*f);
-	    if(k==0) return f-R; else {dk=(double)k;
-	    	     return dk*ln2_hi-((R-dk*ln2_lo)-f);}
-	}
- 	s = f/(2.0+f); 
-	dk = (double)k;
-	z = s*s;
-	i = hx-0x6147a;
-	w = z*z;
-	j = 0x6b851-hx;
-	t1= w*(Lg2+w*(Lg4+w*Lg6)); 
-	t2= z*(Lg1+w*(Lg3+w*(Lg5+w*Lg7))); 
-	i |= j;
-	R = t2+t1;
-	if(i>0) {
-	    hfsq=0.5*f*f;
-	    if(k==0) return f-(hfsq-s*(hfsq+R)); else
-		     return dk*ln2_hi-((hfsq-(s*(hfsq+R)+dk*ln2_lo))-f);
-	} else {
-	    if(k==0) return f-s*(f-R); else
-		     return dk*ln2_hi-((s*(f-R)-dk*ln2_lo)-f);
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_log10.c b/newlib/libm/math/e_log10.c
deleted file mode 100644
index f7daaa1b2..000000000
--- a/newlib/libm/math/e_log10.c
+++ /dev/null
@@ -1,98 +0,0 @@
-
-/* @(#)e_log10.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_log10(x)
- * Return the base 10 logarithm of x
- * 
- * Method :
- *	Let log10_2hi = leading 40 bits of log10(2) and
- *	    log10_2lo = log10(2) - log10_2hi,
- *	    ivln10   = 1/log(10) rounded.
- *	Then
- *		n = ilogb(x), 
- *		if(n<0)  n = n+1;
- *		x = scalbn(x,-n);
- *		log10(x) := n*log10_2hi + (n*log10_2lo + ivln10*log(x))
- *
- * Note 1:
- *	To guarantee log10(10**n)=n, where 10**n is normal, the rounding 
- *	mode must set to Round-to-Nearest.
- * Note 2:
- *	[1/log(10)] rounded to 53 bits has error  .198   ulps;
- *	log10 is monotonic at all binary break points.
- *
- * Special cases:
- *	log10(x) is NaN with signal if x < 0; 
- *	log10(+INF) is +INF with no signal; log10(0) is -INF with signal;
- *	log10(NaN) is that NaN with no signal;
- *	log10(10**N) = N  for N=0,1,...,22.
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following constants.
- * The decimal values may be used, provided that the compiler will convert
- * from decimal to binary accurately enough to produce the hexadecimal values
- * shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-two54      =  1.80143985094819840000e+16, /* 0x43500000, 0x00000000 */
-ivln10     =  4.34294481903251816668e-01, /* 0x3FDBCB7B, 0x1526E50E */
-log10_2hi  =  3.01029995663611771306e-01, /* 0x3FD34413, 0x509F6000 */
-log10_2lo  =  3.69423907715893078616e-13; /* 0x3D59FEF3, 0x11F12B36 */
-
-#ifdef __STDC__
-static const double zero   =  0.0;
-#else
-static double zero   =  0.0;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_log10(double x)
-#else
-	double __ieee754_log10(x)
-	double x;
-#endif
-{
-	double y,z;
-	__int32_t i,k,hx;
-	__uint32_t lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-
-        k=0;
-        if (hx < 0x00100000) {                  /* x < 2**-1022  */
-            if (((hx&0x7fffffff)|lx)==0)
-                return -two54/zero;             /* log(+-0)=-inf */
-            if (hx<0) return (x-x)/zero;        /* log(-#) = NaN */
-            k -= 54; x *= two54; /* subnormal number, scale up x */
-	    GET_HIGH_WORD(hx,x);
-        }
-	if (hx >= 0x7ff00000) return x+x;
-	k += (hx>>20)-1023;
-	i  = ((__uint32_t)k&0x80000000)>>31;
-        hx = (hx&0x000fffff)|((0x3ff-i)<<20);
-        y  = (double)(k+i);
-	SET_HIGH_WORD(x,hx);
-	z  = y*log10_2lo + ivln10*__ieee754_log(x);
-	return  z+y*log10_2hi;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_pow.c b/newlib/libm/math/e_pow.c
deleted file mode 100644
index 56c7980ef..000000000
--- a/newlib/libm/math/e_pow.c
+++ /dev/null
@@ -1,312 +0,0 @@
-
-/* @(#)e_pow.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_pow(x,y) return x**y
- *
- *		      n
- * Method:  Let x =  2   * (1+f)
- *	1. Compute and return log2(x) in two pieces:
- *		log2(x) = w1 + w2,
- *	   where w1 has 53-24 = 29 bit trailing zeros.
- *	2. Perform y*log2(x) = n+y' by simulating multi-precision 
- *	   arithmetic, where |y'|<=0.5.
- *	3. Return x**y = 2**n*exp(y'*log2)
- *
- * Special cases:
- *	1.  (anything) ** 0  is 1
- *	2.  (anything) ** 1  is itself
- *	3.  (anything) ** NAN is NAN
- *	4.  NAN ** (anything except 0) is NAN
- *	5.  +-(|x| > 1) **  +INF is +INF
- *	6.  +-(|x| > 1) **  -INF is +0
- *	7.  +-(|x| < 1) **  +INF is +0
- *	8.  +-(|x| < 1) **  -INF is +INF
- *	9.  +-1         ** +-INF is NAN
- *	10. +0 ** (+anything except 0, NAN)               is +0
- *	11. -0 ** (+anything except 0, NAN, odd integer)  is +0
- *	12. +0 ** (-anything except 0, NAN)               is +INF
- *	13. -0 ** (-anything except 0, NAN, odd integer)  is +INF
- *	14. -0 ** (odd integer) = -( +0 ** (odd integer) )
- *	15. +INF ** (+anything except 0,NAN) is +INF
- *	16. +INF ** (-anything except 0,NAN) is +0
- *	17. -INF ** (anything)  = -0 ** (-anything)
- *	18. (-anything) ** (integer) is (-1)**(integer)*(+anything**integer)
- *	19. (-anything except 0 and inf) ** (non-integer) is NAN
- *
- * Accuracy:
- *	pow(x,y) returns x**y nearly rounded. In particular
- *			pow(integer,integer)
- *	always returns the correct integer provided it is 
- *	representable.
- *
- * Constants :
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-bp[] = {1.0, 1.5,},
-dp_h[] = { 0.0, 5.84962487220764160156e-01,}, /* 0x3FE2B803, 0x40000000 */
-dp_l[] = { 0.0, 1.35003920212974897128e-08,}, /* 0x3E4CFDEB, 0x43CFD006 */
-zero    =  0.0,
-one	=  1.0,
-two	=  2.0,
-two53	=  9007199254740992.0,	/* 0x43400000, 0x00000000 */
-huge	=  1.0e300,
-tiny    =  1.0e-300,
-	/* poly coefs for (3/2)*(log(x)-2s-2/3*s**3 */
-L1  =  5.99999999999994648725e-01, /* 0x3FE33333, 0x33333303 */
-L2  =  4.28571428578550184252e-01, /* 0x3FDB6DB6, 0xDB6FABFF */
-L3  =  3.33333329818377432918e-01, /* 0x3FD55555, 0x518F264D */
-L4  =  2.72728123808534006489e-01, /* 0x3FD17460, 0xA91D4101 */
-L5  =  2.30660745775561754067e-01, /* 0x3FCD864A, 0x93C9DB65 */
-L6  =  2.06975017800338417784e-01, /* 0x3FCA7E28, 0x4A454EEF */
-P1   =  1.66666666666666019037e-01, /* 0x3FC55555, 0x5555553E */
-P2   = -2.77777777770155933842e-03, /* 0xBF66C16C, 0x16BEBD93 */
-P3   =  6.61375632143793436117e-05, /* 0x3F11566A, 0xAF25DE2C */
-P4   = -1.65339022054652515390e-06, /* 0xBEBBBD41, 0xC5D26BF1 */
-P5   =  4.13813679705723846039e-08, /* 0x3E663769, 0x72BEA4D0 */
-lg2  =  6.93147180559945286227e-01, /* 0x3FE62E42, 0xFEFA39EF */
-lg2_h  =  6.93147182464599609375e-01, /* 0x3FE62E43, 0x00000000 */
-lg2_l  = -1.90465429995776804525e-09, /* 0xBE205C61, 0x0CA86C39 */
-ovt =  8.0085662595372944372e-0017, /* -(1024-log2(ovfl+.5ulp)) */
-cp    =  9.61796693925975554329e-01, /* 0x3FEEC709, 0xDC3A03FD =2/(3ln2) */
-cp_h  =  9.61796700954437255859e-01, /* 0x3FEEC709, 0xE0000000 =(float)cp */
-cp_l  = -7.02846165095275826516e-09, /* 0xBE3E2FE0, 0x145B01F5 =tail of cp_h*/
-ivln2    =  1.44269504088896338700e+00, /* 0x3FF71547, 0x652B82FE =1/ln2 */
-ivln2_h  =  1.44269502162933349609e+00, /* 0x3FF71547, 0x60000000 =24b 1/ln2*/
-ivln2_l  =  1.92596299112661746887e-08; /* 0x3E54AE0B, 0xF85DDF44 =1/ln2 tail*/
-
-#ifdef __STDC__
-	double __ieee754_pow(double x, double y)
-#else
-	double __ieee754_pow(x,y)
-	double x, y;
-#endif
-{
-	double z,ax,z_h,z_l,p_h,p_l;
-	double y1,t1,t2,r,s,t,u,v,w;
-	__int32_t i,j,k,yisint,n;
-	__int32_t hx,hy,ix,iy;
-	__uint32_t lx,ly;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hy,ly,y);
-	ix = hx&0x7fffffff;  iy = hy&0x7fffffff;
-
-    /* y==zero: x**0 = 1 */
-	if((iy|ly)==0) return one; 	
-
-    /* +-NaN return x+y */
-	if(ix > 0x7ff00000 || ((ix==0x7ff00000)&&(lx!=0)) ||
-	   iy > 0x7ff00000 || ((iy==0x7ff00000)&&(ly!=0))) 
-		return x+y;	
-
-    /* determine if y is an odd int when x < 0
-     * yisint = 0	... y is not an integer
-     * yisint = 1	... y is an odd int
-     * yisint = 2	... y is an even int
-     */
-	yisint  = 0;
-	if(hx<0) {	
-	    if(iy>=0x43400000) yisint = 2; /* even integer y */
-	    else if(iy>=0x3ff00000) {
-		k = (iy>>20)-0x3ff;	   /* exponent */
-		if(k>20) {
-		    j = ly>>(52-k);
-		    if((j<<(52-k))==ly) yisint = 2-(j&1);
-		} else if(ly==0) {
-		    j = iy>>(20-k);
-		    if((j<<(20-k))==iy) yisint = 2-(j&1);
-		}
-	    }		
-	} 
-
-    /* special value of y */
-	if(ly==0) { 	
-	    if (iy==0x7ff00000) {	/* y is +-inf */
-	        if(((ix-0x3ff00000)|lx)==0)
-		    return  y - y;	/* inf**+-1 is NaN */
-	        else if (ix >= 0x3ff00000)/* (|x|>1)**+-inf = inf,0 */
-		    return (hy>=0)? y: zero;
-	        else			/* (|x|<1)**-,+inf = inf,0 */
-		    return (hy<0)?-y: zero;
-	    } 
-	    if(iy==0x3ff00000) {	/* y is  +-1 */
-		if(hy<0) return one/x; else return x;
-	    }
-	    if(hy==0x40000000) return x*x; /* y is  2 */
-	    if(hy==0x3fe00000) {	/* y is  0.5 */
-		if(hx>=0)	/* x >= +0 */
-		return __ieee754_sqrt(x);	
-	    }
-	}
-
-	ax   = fabs(x);
-    /* special value of x */
-	if(lx==0) {
-	    if(ix==0x7ff00000||ix==0||ix==0x3ff00000){
-		z = ax;			/*x is +-0,+-inf,+-1*/
-		if(hy<0) z = one/z;	/* z = (1/|x|) */
-		if(hx<0) {
-		    if(((ix-0x3ff00000)|yisint)==0) {
-			z = (z-z)/(z-z); /* (-1)**non-int is NaN */
-		    } else if(yisint==1) 
-			z = -z;		/* (x<0)**odd = -(|x|**odd) */
-		}
-		return z;
-	    }
-	}
-    
-    /* (x<0)**(non-int) is NaN */
-    /* REDHAT LOCAL: This used to be
-	if((((hx>>31)+1)|yisint)==0) return (x-x)/(x-x);
-       but ANSI C says a right shift of a signed negative quantity is
-       implementation defined.  */
-	if(((((__uint32_t)hx>>31)-1)|yisint)==0) return (x-x)/(x-x);
-
-    /* |y| is huge */
-	if(iy>0x41e00000) { /* if |y| > 2**31 */
-	    if(iy>0x43f00000){	/* if |y| > 2**64, must o/uflow */
-		if(ix<=0x3fefffff) return (hy<0)? huge*huge:tiny*tiny;
-		if(ix>=0x3ff00000) return (hy>0)? huge*huge:tiny*tiny;
-	    }
-	/* over/underflow if x is not close to one */
-	    if(ix<0x3fefffff) return (hy<0)? huge*huge:tiny*tiny;
-	    if(ix>0x3ff00000) return (hy>0)? huge*huge:tiny*tiny;
-	/* now |1-x| is tiny <= 2**-20, suffice to compute 
-	   log(x) by x-x^2/2+x^3/3-x^4/4 */
-	    t = ax-1;		/* t has 20 trailing zeros */
-	    w = (t*t)*(0.5-t*(0.3333333333333333333333-t*0.25));
-	    u = ivln2_h*t;	/* ivln2_h has 21 sig. bits */
-	    v = t*ivln2_l-w*ivln2;
-	    t1 = u+v;
-	    SET_LOW_WORD(t1,0);
-	    t2 = v-(t1-u);
-	} else {
-	    double s2,s_h,s_l,t_h,t_l;
-	    n = 0;
-	/* take care subnormal number */
-	    if(ix<0x00100000)
-		{ax *= two53; n -= 53; GET_HIGH_WORD(ix,ax); }
-	    n  += ((ix)>>20)-0x3ff;
-	    j  = ix&0x000fffff;
-	/* determine interval */
-	    ix = j|0x3ff00000;		/* normalize ix */
-	    if(j<=0x3988E) k=0;		/* |x|<sqrt(3/2) */
-	    else if(j<0xBB67A) k=1;	/* |x|<sqrt(3)   */
-	    else {k=0;n+=1;ix -= 0x00100000;}
-	    SET_HIGH_WORD(ax,ix);
-
-	/* compute s = s_h+s_l = (x-1)/(x+1) or (x-1.5)/(x+1.5) */
-	    u = ax-bp[k];		/* bp[0]=1.0, bp[1]=1.5 */
-	    v = one/(ax+bp[k]);
-	    s = u*v;
-	    s_h = s;
-	    SET_LOW_WORD(s_h,0);
-	/* t_h=ax+bp[k] High */
-	    t_h = zero;
-	    SET_HIGH_WORD(t_h,((ix>>1)|0x20000000)+0x00080000+(k<<18));
-	    t_l = ax - (t_h-bp[k]);
-	    s_l = v*((u-s_h*t_h)-s_h*t_l);
-	/* compute log(ax) */
-	    s2 = s*s;
-	    r = s2*s2*(L1+s2*(L2+s2*(L3+s2*(L4+s2*(L5+s2*L6)))));
-	    r += s_l*(s_h+s);
-	    s2  = s_h*s_h;
-	    t_h = 3.0+s2+r;
-	    SET_LOW_WORD(t_h,0);
-	    t_l = r-((t_h-3.0)-s2);
-	/* u+v = s*(1+...) */
-	    u = s_h*t_h;
-	    v = s_l*t_h+t_l*s;
-	/* 2/(3log2)*(s+...) */
-	    p_h = u+v;
-	    SET_LOW_WORD(p_h,0);
-	    p_l = v-(p_h-u);
-	    z_h = cp_h*p_h;		/* cp_h+cp_l = 2/(3*log2) */
-	    z_l = cp_l*p_h+p_l*cp+dp_l[k];
-	/* log2(ax) = (s+..)*2/(3*log2) = n + dp_h + z_h + z_l */
-	    t = (double)n;
-	    t1 = (((z_h+z_l)+dp_h[k])+t);
-	    SET_LOW_WORD(t1,0);
-	    t2 = z_l-(((t1-t)-dp_h[k])-z_h);
-	}
-
-	s = one; /* s (sign of result -ve**odd) = -1 else = 1 */
-	if(((((__uint32_t)hx>>31)-1)|(yisint-1))==0)
-	    s = -one;/* (-ve)**(odd int) */
-
-    /* split up y into y1+y2 and compute (y1+y2)*(t1+t2) */
-	y1  = y;
-	SET_LOW_WORD(y1,0);
-	p_l = (y-y1)*t1+y*t2;
-	p_h = y1*t1;
-	z = p_l+p_h;
-	EXTRACT_WORDS(j,i,z);
-	if (j>=0x40900000) {				/* z >= 1024 */
-	    if(((j-0x40900000)|i)!=0)			/* if z > 1024 */
-		return s*huge*huge;			/* overflow */
-	    else {
-		if(p_l+ovt>z-p_h) return s*huge*huge;	/* overflow */
-	    }
-	} else if((j&0x7fffffff)>=0x4090cc00 ) {	/* z <= -1075 */
-	    if(((j-0xc090cc00)|i)!=0) 		/* z < -1075 */
-		return s*tiny*tiny;		/* underflow */
-	    else {
-		if(p_l<=z-p_h) return s*tiny*tiny;	/* underflow */
-	    }
-	}
-    /*
-     * compute 2**(p_h+p_l)
-     */
-	i = j&0x7fffffff;
-	k = (i>>20)-0x3ff;
-	n = 0;
-	if(i>0x3fe00000) {		/* if |z| > 0.5, set n = [z+0.5] */
-	    n = j+(0x00100000>>(k+1));
-	    k = ((n&0x7fffffff)>>20)-0x3ff;	/* new k for n */
-	    t = zero;
-	    SET_HIGH_WORD(t,n&~(0x000fffff>>k));
-	    n = ((n&0x000fffff)|0x00100000)>>(20-k);
-	    if(j<0) n = -n;
-	    p_h -= t;
-	} 
-	t = p_l+p_h;
-	SET_LOW_WORD(t,0);
-	u = t*lg2_h;
-	v = (p_l-(t-p_h))*lg2+t*lg2_l;
-	z = u+v;
-	w = v-(z-u);
-	t  = z*z;
-	t1  = z - t*(P1+t*(P2+t*(P3+t*(P4+t*P5))));
-	r  = (z*t1)/(t1-two)-(w+z*w);
-	z  = one-(r-z);
-	GET_HIGH_WORD(j,z);
-	j += (n<<20);
-	if((j>>20)<=0) z = scalbn(z,(int)n);	/* subnormal output */
-	else SET_HIGH_WORD(z,j);
-	return s*z;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_rem_pio2.c b/newlib/libm/math/e_rem_pio2.c
deleted file mode 100644
index 3e5d0f7a2..000000000
--- a/newlib/libm/math/e_rem_pio2.c
+++ /dev/null
@@ -1,185 +0,0 @@
-
-/* @(#)e_rem_pio2.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_rem_pio2(x,y)
- * 
- * return the remainder of x rem pi/2 in y[0]+y[1] 
- * use __kernel_rem_pio2()
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-/*
- * Table of constants for 2/pi, 396 Hex digits (476 decimal) of 2/pi 
- */
-#ifdef __STDC__
-static const __int32_t two_over_pi[] = {
-#else
-static __int32_t two_over_pi[] = {
-#endif
-0xA2F983, 0x6E4E44, 0x1529FC, 0x2757D1, 0xF534DD, 0xC0DB62, 
-0x95993C, 0x439041, 0xFE5163, 0xABDEBB, 0xC561B7, 0x246E3A, 
-0x424DD2, 0xE00649, 0x2EEA09, 0xD1921C, 0xFE1DEB, 0x1CB129, 
-0xA73EE8, 0x8235F5, 0x2EBB44, 0x84E99C, 0x7026B4, 0x5F7E41, 
-0x3991D6, 0x398353, 0x39F49C, 0x845F8B, 0xBDF928, 0x3B1FF8, 
-0x97FFDE, 0x05980F, 0xEF2F11, 0x8B5A0A, 0x6D1F6D, 0x367ECF, 
-0x27CB09, 0xB74F46, 0x3F669E, 0x5FEA2D, 0x7527BA, 0xC7EBE5, 
-0xF17B3D, 0x0739F7, 0x8A5292, 0xEA6BFB, 0x5FB11F, 0x8D5D08, 
-0x560330, 0x46FC7B, 0x6BABF0, 0xCFBC20, 0x9AF436, 0x1DA9E3, 
-0x91615E, 0xE61B08, 0x659985, 0x5F14A0, 0x68408D, 0xFFD880, 
-0x4D7327, 0x310606, 0x1556CA, 0x73A8C9, 0x60E27B, 0xC08C6B, 
-};
-
-#ifdef __STDC__
-static const __int32_t npio2_hw[] = {
-#else
-static __int32_t npio2_hw[] = {
-#endif
-0x3FF921FB, 0x400921FB, 0x4012D97C, 0x401921FB, 0x401F6A7A, 0x4022D97C,
-0x4025FDBB, 0x402921FB, 0x402C463A, 0x402F6A7A, 0x4031475C, 0x4032D97C,
-0x40346B9C, 0x4035FDBB, 0x40378FDB, 0x403921FB, 0x403AB41B, 0x403C463A,
-0x403DD85A, 0x403F6A7A, 0x40407E4C, 0x4041475C, 0x4042106C, 0x4042D97C,
-0x4043A28C, 0x40446B9C, 0x404534AC, 0x4045FDBB, 0x4046C6CB, 0x40478FDB,
-0x404858EB, 0x404921FB,
-};
-
-/*
- * invpio2:  53 bits of 2/pi
- * pio2_1:   first  33 bit of pi/2
- * pio2_1t:  pi/2 - pio2_1
- * pio2_2:   second 33 bit of pi/2
- * pio2_2t:  pi/2 - (pio2_1+pio2_2)
- * pio2_3:   third  33 bit of pi/2
- * pio2_3t:  pi/2 - (pio2_1+pio2_2+pio2_3)
- */
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-zero =  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
-half =  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-two24 =  1.67772160000000000000e+07, /* 0x41700000, 0x00000000 */
-invpio2 =  6.36619772367581382433e-01, /* 0x3FE45F30, 0x6DC9C883 */
-pio2_1  =  1.57079632673412561417e+00, /* 0x3FF921FB, 0x54400000 */
-pio2_1t =  6.07710050650619224932e-11, /* 0x3DD0B461, 0x1A626331 */
-pio2_2  =  6.07710050630396597660e-11, /* 0x3DD0B461, 0x1A600000 */
-pio2_2t =  2.02226624879595063154e-21, /* 0x3BA3198A, 0x2E037073 */
-pio2_3  =  2.02226624871116645580e-21, /* 0x3BA3198A, 0x2E000000 */
-pio2_3t =  8.47842766036889956997e-32; /* 0x397B839A, 0x252049C1 */
-
-#ifdef __STDC__
-	__int32_t __ieee754_rem_pio2(double x, double *y)
-#else
-	__int32_t __ieee754_rem_pio2(x,y)
-	double x,y[];
-#endif
-{
-	double z,w,t,r,fn;
-	double tx[3];
-	__int32_t i,j,n,ix,hx;
-	int e0,nx;
-	__uint32_t low;
-
-	GET_HIGH_WORD(hx,x);		/* high word of x */
-	ix = hx&0x7fffffff;
-	if(ix<=0x3fe921fb)   /* |x| ~<= pi/4 , no need for reduction */
-	    {y[0] = x; y[1] = 0; return 0;}
-	if(ix<0x4002d97c) {  /* |x| < 3pi/4, special case with n=+-1 */
-	    if(hx>0) { 
-		z = x - pio2_1;
-		if(ix!=0x3ff921fb) { 	/* 33+53 bit pi is good enough */
-		    y[0] = z - pio2_1t;
-		    y[1] = (z-y[0])-pio2_1t;
-		} else {		/* near pi/2, use 33+33+53 bit pi */
-		    z -= pio2_2;
-		    y[0] = z - pio2_2t;
-		    y[1] = (z-y[0])-pio2_2t;
-		}
-		return 1;
-	    } else {	/* negative x */
-		z = x + pio2_1;
-		if(ix!=0x3ff921fb) { 	/* 33+53 bit pi is good enough */
-		    y[0] = z + pio2_1t;
-		    y[1] = (z-y[0])+pio2_1t;
-		} else {		/* near pi/2, use 33+33+53 bit pi */
-		    z += pio2_2;
-		    y[0] = z + pio2_2t;
-		    y[1] = (z-y[0])+pio2_2t;
-		}
-		return -1;
-	    }
-	}
-	if(ix<=0x413921fb) { /* |x| ~<= 2^19*(pi/2), medium size */
-	    t  = fabs(x);
-	    n  = (__int32_t) (t*invpio2+half);
-	    fn = (double)n;
-	    r  = t-fn*pio2_1;
-	    w  = fn*pio2_1t;	/* 1st round good to 85 bit */
-	    if(n<32&&ix!=npio2_hw[n-1]) {	
-		y[0] = r-w;	/* quick check no cancellation */
-	    } else {
-	        __uint32_t high;
-	        j  = ix>>20;
-	        y[0] = r-w; 
-		GET_HIGH_WORD(high,y[0]);
-	        i = j-((high>>20)&0x7ff);
-	        if(i>16) {  /* 2nd iteration needed, good to 118 */
-		    t  = r;
-		    w  = fn*pio2_2;	
-		    r  = t-w;
-		    w  = fn*pio2_2t-((t-r)-w);	
-		    y[0] = r-w;
-		    GET_HIGH_WORD(high,y[0]);
-		    i = j-((high>>20)&0x7ff);
-		    if(i>49)  {	/* 3rd iteration need, 151 bits acc */
-		    	t  = r;	/* will cover all possible cases */
-		    	w  = fn*pio2_3;	
-		    	r  = t-w;
-		    	w  = fn*pio2_3t-((t-r)-w);	
-		    	y[0] = r-w;
-		    }
-		}
-	    }
-	    y[1] = (r-y[0])-w;
-	    if(hx<0) 	{y[0] = -y[0]; y[1] = -y[1]; return -n;}
-	    else	 return n;
-	}
-    /* 
-     * all other (large) arguments
-     */
-	if(ix>=0x7ff00000) {		/* x is inf or NaN */
-	    y[0]=y[1]=x-x; return 0;
-	}
-    /* set z = scalbn(|x|,ilogb(x)-23) */
-	GET_LOW_WORD(low,x);
-	SET_LOW_WORD(z,low);
-	e0 	= (int)((ix>>20)-1046);	/* e0 = ilogb(z)-23; */
-	SET_HIGH_WORD(z, ix - ((__int32_t)e0<<20));
-	for(i=0;i<2;i++) {
-		tx[i] = (double)((__int32_t)(z));
-		z     = (z-tx[i])*two24;
-	}
-	tx[2] = z;
-	nx = 3;
-	while(tx[nx-1]==zero) nx--;	/* skip zero term */
-	n  =  __kernel_rem_pio2(tx,y,e0,nx,2,two_over_pi);
-	if(hx<0) {y[0] = -y[0]; y[1] = -y[1]; return -n;}
-	return n;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_remainder.c b/newlib/libm/math/e_remainder.c
deleted file mode 100644
index ae7ce649a..000000000
--- a/newlib/libm/math/e_remainder.c
+++ /dev/null
@@ -1,80 +0,0 @@
-
-/* @(#)e_remainder.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_remainder(x,p)
- * Return :                  
- * 	returns  x REM p  =  x - [x/p]*p as if in infinite 
- * 	precise arithmetic, where [x/p] is the (infinite bit) 
- *	integer nearest x/p (in half way case choose the even one).
- * Method : 
- *	Based on fmod() return x-[x/p]chopped*p exactlp.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-
-#ifdef __STDC__
-	double __ieee754_remainder(double x, double p)
-#else
-	double __ieee754_remainder(x,p)
-	double x,p;
-#endif
-{
-	__int32_t hx,hp;
-	__uint32_t sx,lx,lp;
-	double p_half;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hp,lp,p);
-	sx = hx&0x80000000;
-	hp &= 0x7fffffff;
-	hx &= 0x7fffffff;
-
-    /* purge off exception values */
-	if((hp|lp)==0) return (x*p)/(x*p); 	/* p = 0 */
-	if((hx>=0x7ff00000)||			/* x not finite */
-	  ((hp>=0x7ff00000)&&			/* p is NaN */
-	  (((hp-0x7ff00000)|lp)!=0)))
-	    return (x*p)/(x*p);
-
-
-	if (hp<=0x7fdfffff) x = __ieee754_fmod(x,p+p);	/* now x < 2p */
-	if (((hx-hp)|(lx-lp))==0) return zero*x;
-	x  = fabs(x);
-	p  = fabs(p);
-	if (hp<0x00200000) {
-	    if(x+x>p) {
-		x-=p;
-		if(x+x>=p) x -= p;
-	    }
-	} else {
-	    p_half = 0.5*p;
-	    if(x>p_half) {
-		x-=p;
-		if(x>=p_half) x -= p;
-	    }
-	}
-	GET_HIGH_WORD(hx,x);
-	SET_HIGH_WORD(x,hx^sx);
-	return x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_scalb.c b/newlib/libm/math/e_scalb.c
deleted file mode 100644
index 0bb924b43..000000000
--- a/newlib/libm/math/e_scalb.c
+++ /dev/null
@@ -1,55 +0,0 @@
-
-/* @(#)e_scalb.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * __ieee754_scalb(x, fn) is provide for
- * passing various standard test suite. One 
- * should use scalbn() instead.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef _SCALB_INT
-#ifdef __STDC__
-	double __ieee754_scalb(double x, int fn)
-#else
-	double __ieee754_scalb(x,fn)
-	double x; int fn;
-#endif
-#else
-#ifdef __STDC__
-	double __ieee754_scalb(double x, double fn)
-#else
-	double __ieee754_scalb(x,fn)
-	double x, fn;
-#endif
-#endif
-{
-#ifdef _SCALB_INT
-	return scalbn(x,fn);
-#else
-	if (isnan(x)||isnan(fn)) return x*fn;
-	if (!finite(fn)) {
-	    if(fn>0.0) return x*fn;
-	    else       return x/(-fn);
-	}
-	if (rint(fn)!=fn) return (fn-fn)/(fn-fn);
-	if ( fn > 65000.0) return scalbn(x, 65000);
-	if (-fn > 65000.0) return scalbn(x,-65000);
-	return scalbn(x,(int)fn);
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_sinh.c b/newlib/libm/math/e_sinh.c
deleted file mode 100644
index cf7ebfb88..000000000
--- a/newlib/libm/math/e_sinh.c
+++ /dev/null
@@ -1,86 +0,0 @@
-
-/* @(#)e_sinh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_sinh(x)
- * Method : 
- * mathematically sinh(x) if defined to be (exp(x)-exp(-x))/2
- *	1. Replace x by |x| (sinh(-x) = -sinh(x)). 
- *	2. 
- *		                                    E + E/(E+1)
- *	    0        <= x <= 22     :  sinh(x) := --------------, E=expm1(x)
- *			       			        2
- *
- *	    22       <= x <= lnovft :  sinh(x) := exp(x)/2 
- *	    lnovft   <= x <= ln2ovft:  sinh(x) := exp(x/2)/2 * exp(x/2)
- *	    ln2ovft  <  x	    :  sinh(x) := x*shuge (overflow)
- *
- * Special cases:
- *	sinh(x) is |x| if x is +INF, -INF, or NaN.
- *	only sinh(0)=0 is exact for finite x.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, shuge = 1.0e307;
-#else
-static double one = 1.0, shuge = 1.0e307;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_sinh(double x)
-#else
-	double __ieee754_sinh(x)
-	double x;
-#endif
-{	
-	double t,w,h;
-	__int32_t ix,jx;
-	__uint32_t lx;
-
-    /* High word of |x|. */
-	GET_HIGH_WORD(jx,x);
-	ix = jx&0x7fffffff;
-
-    /* x is INF or NaN */
-	if(ix>=0x7ff00000) return x+x;	
-
-	h = 0.5;
-	if (jx<0) h = -h;
-    /* |x| in [0,22], return sign(x)*0.5*(E+E/(E+1))) */
-	if (ix < 0x40360000) {		/* |x|<22 */
-	    if (ix<0x3e300000) 		/* |x|<2**-28 */
-		if(shuge+x>one) return x;/* sinh(tiny) = tiny with inexact */
-	    t = expm1(fabs(x));
-	    if(ix<0x3ff00000) return h*(2.0*t-t*t/(t+one));
-	    return h*(t+t/(t+one));
-	}
-
-    /* |x| in [22, log(maxdouble)] return 0.5*exp(|x|) */
-	if (ix < 0x40862E42)  return h*__ieee754_exp(fabs(x));
-
-    /* |x| in [log(maxdouble), overflowthresold] */
-	GET_LOW_WORD(lx,x);
-       if (ix<0x408633CE || (ix==0x408633ce && lx<=(__uint32_t)0x8fb9f87d)) {
-	    w = __ieee754_exp(0.5*fabs(x));
-	    t = h*w;
-	    return t*w;
-	}
-
-    /* |x| > overflowthresold, sinh(x) overflow */
-	return x*shuge;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/e_sqrt.c b/newlib/libm/math/e_sqrt.c
deleted file mode 100644
index 460125a8f..000000000
--- a/newlib/libm/math/e_sqrt.c
+++ /dev/null
@@ -1,452 +0,0 @@
-
-/* @(#)e_sqrt.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __ieee754_sqrt(x)
- * Return correctly rounded sqrt.
- *           ------------------------------------------
- *	     |  Use the hardware sqrt if you have one |
- *           ------------------------------------------
- * Method: 
- *   Bit by bit method using integer arithmetic. (Slow, but portable) 
- *   1. Normalization
- *	Scale x to y in [1,4) with even powers of 2: 
- *	find an integer k such that  1 <= (y=x*2^(2k)) < 4, then
- *		sqrt(x) = 2^k * sqrt(y)
- *   2. Bit by bit computation
- *	Let q  = sqrt(y) truncated to i bit after binary point (q = 1),
- *	     i							 0
- *                                     i+1         2
- *	    s  = 2*q , and	y  =  2   * ( y - q  ).		(1)
- *	     i      i            i                 i
- *                                                        
- *	To compute q    from q , one checks whether 
- *		    i+1       i                       
- *
- *			      -(i+1) 2
- *			(q + 2      ) <= y.			(2)
- *     			  i
- *							      -(i+1)
- *	If (2) is false, then q   = q ; otherwise q   = q  + 2      .
- *		 	       i+1   i             i+1   i
- *
- *	With some algebric manipulation, it is not difficult to see
- *	that (2) is equivalent to 
- *                             -(i+1)
- *			s  +  2       <= y			(3)
- *			 i                i
- *
- *	The advantage of (3) is that s  and y  can be computed by 
- *				      i      i
- *	the following recurrence formula:
- *	    if (3) is false
- *
- *	    s     =  s  ,	y    = y   ;			(4)
- *	     i+1      i		 i+1    i
- *
- *	    otherwise,
- *                         -i                     -(i+1)
- *	    s	  =  s  + 2  ,  y    = y  -  s  - 2  		(5)
- *           i+1      i          i+1    i     i
- *				
- *	One may easily use induction to prove (4) and (5). 
- *	Note. Since the left hand side of (3) contain only i+2 bits,
- *	      it does not necessary to do a full (53-bit) comparison 
- *	      in (3).
- *   3. Final rounding
- *	After generating the 53 bits result, we compute one more bit.
- *	Together with the remainder, we can decide whether the
- *	result is exact, bigger than 1/2ulp, or less than 1/2ulp
- *	(it will never equal to 1/2ulp).
- *	The rounding mode can be detected by checking whether
- *	huge + tiny is equal to huge, and whether huge - tiny is
- *	equal to huge for some floating point number "huge" and "tiny".
- *		
- * Special cases:
- *	sqrt(+-0) = +-0 	... exact
- *	sqrt(inf) = inf
- *	sqrt(-ve) = NaN		... with invalid signal
- *	sqrt(NaN) = NaN		... with invalid signal for signaling NaN
- *
- * Other methods : see the appended file at the end of the program below.
- *---------------
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static	const double	one	= 1.0, tiny=1.0e-300;
-#else
-static	double	one	= 1.0, tiny=1.0e-300;
-#endif
-
-#ifdef __STDC__
-	double __ieee754_sqrt(double x)
-#else
-	double __ieee754_sqrt(x)
-	double x;
-#endif
-{
-	double z;
-	__int32_t sign = (int)0x80000000; 
-	__uint32_t r,t1,s1,ix1,q1;
-	__int32_t ix0,s0,q,m,t,i;
-
-	EXTRACT_WORDS(ix0,ix1,x);
-
-    /* take care of Inf and NaN */
-	if((ix0&0x7ff00000)==0x7ff00000) {			
-	    return x*x+x;		/* sqrt(NaN)=NaN, sqrt(+inf)=+inf
-					   sqrt(-inf)=sNaN */
-	} 
-    /* take care of zero */
-	if(ix0<=0) {
-	    if(((ix0&(~sign))|ix1)==0) return x;/* sqrt(+-0) = +-0 */
-	    else if(ix0<0)
-		return (x-x)/(x-x);		/* sqrt(-ve) = sNaN */
-	}
-    /* normalize x */
-	m = (ix0>>20);
-	if(m==0) {				/* subnormal x */
-	    while(ix0==0) {
-		m -= 21;
-		ix0 |= (ix1>>11); ix1 <<= 21;
-	    }
-	    for(i=0;(ix0&0x00100000)==0;i++) ix0<<=1;
-	    m -= i-1;
-	    ix0 |= (ix1>>(32-i));
-	    ix1 <<= i;
-	}
-	m -= 1023;	/* unbias exponent */
-	ix0 = (ix0&0x000fffff)|0x00100000;
-	if(m&1){	/* odd m, double x to make it even */
-	    ix0 += ix0 + ((ix1&sign)>>31);
-	    ix1 += ix1;
-	}
-	m >>= 1;	/* m = [m/2] */
-
-    /* generate sqrt(x) bit by bit */
-	ix0 += ix0 + ((ix1&sign)>>31);
-	ix1 += ix1;
-	q = q1 = s0 = s1 = 0;	/* [q,q1] = sqrt(x) */
-	r = 0x00200000;		/* r = moving bit from right to left */
-
-	while(r!=0) {
-	    t = s0+r; 
-	    if(t<=ix0) { 
-		s0   = t+r; 
-		ix0 -= t; 
-		q   += r; 
-	    } 
-	    ix0 += ix0 + ((ix1&sign)>>31);
-	    ix1 += ix1;
-	    r>>=1;
-	}
-
-	r = sign;
-	while(r!=0) {
-	    t1 = s1+r; 
-	    t  = s0;
-	    if((t<ix0)||((t==ix0)&&(t1<=ix1))) { 
-		s1  = t1+r;
-		if(((t1&sign)==sign)&&(s1&sign)==0) s0 += 1;
-		ix0 -= t;
-		if (ix1 < t1) ix0 -= 1;
-		ix1 -= t1;
-		q1  += r;
-	    }
-	    ix0 += ix0 + ((ix1&sign)>>31);
-	    ix1 += ix1;
-	    r>>=1;
-	}
-
-    /* use floating add to find out rounding direction */
-	if((ix0|ix1)!=0) {
-	    z = one-tiny; /* trigger inexact flag */
-	    if (z>=one) {
-	        z = one+tiny;
-	        if (q1==(__uint32_t)0xffffffff) { q1=0; q += 1;}
-		else if (z>one) {
-		    if (q1==(__uint32_t)0xfffffffe) q+=1;
-		    q1+=2; 
-		} else
-	            q1 += (q1&1);
-	    }
-	}
-	ix0 = (q>>1)+0x3fe00000;
-	ix1 =  q1>>1;
-	if ((q&1)==1) ix1 |= sign;
-	ix0 += (m <<20);
-	INSERT_WORDS(z,ix0,ix1);
-	return z;
-}
- 
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-/*
-Other methods  (use floating-point arithmetic)
--------------
-(This is a copy of a drafted paper by Prof W. Kahan 
-and K.C. Ng, written in May, 1986)
-
-	Two algorithms are given here to implement sqrt(x) 
-	(IEEE double precision arithmetic) in software.
-	Both supply sqrt(x) correctly rounded. The first algorithm (in
-	Section A) uses newton iterations and involves four divisions.
-	The second one uses reciproot iterations to avoid division, but
-	requires more multiplications. Both algorithms need the ability
-	to chop results of arithmetic operations instead of round them, 
-	and the INEXACT flag to indicate when an arithmetic operation
-	is executed exactly with no roundoff error, all part of the 
-	standard (IEEE 754-1985). The ability to perform shift, add,
-	subtract and logical AND operations upon 32-bit words is needed
-	too, though not part of the standard.
-
-A.  sqrt(x) by Newton Iteration
-
-   (1)	Initial approximation
-
-	Let x0 and x1 be the leading and the trailing 32-bit words of
-	a floating point number x (in IEEE double format) respectively 
-
-	    1    11		     52				  ...widths
-	   ------------------------------------------------------
-	x: |s|	  e     |	      f				|
-	   ------------------------------------------------------
-	      msb    lsb  msb				      lsb ...order
-
- 
-	     ------------------------  	     ------------------------
-	x0:  |s|   e    |    f1     |	 x1: |          f2           |
-	     ------------------------  	     ------------------------
-
-	By performing shifts and subtracts on x0 and x1 (both regarded
-	as integers), we obtain an 8-bit approximation of sqrt(x) as
-	follows.
-
-		k  := (x0>>1) + 0x1ff80000;
-		y0 := k - T1[31&(k>>15)].	... y ~ sqrt(x) to 8 bits
-	Here k is a 32-bit integer and T1[] is an integer array containing
-	correction terms. Now magically the floating value of y (y's
-	leading 32-bit word is y0, the value of its trailing word is 0)
-	approximates sqrt(x) to almost 8-bit.
-
-	Value of T1:
-	static int T1[32]= {
-	0,	1024,	3062,	5746,	9193,	13348,	18162,	23592,
-	29598,	36145,	43202,	50740,	58733,	67158,	75992,	85215,
-	83599,	71378,	60428,	50647,	41945,	34246,	27478,	21581,
-	16499,	12183,	8588,	5674,	3403,	1742,	661,	130,};
-
-    (2)	Iterative refinement
-
-	Apply Heron's rule three times to y, we have y approximates 
-	sqrt(x) to within 1 ulp (Unit in the Last Place):
-
-		y := (y+x/y)/2		... almost 17 sig. bits
-		y := (y+x/y)/2		... almost 35 sig. bits
-		y := y-(y-x/y)/2	... within 1 ulp
-
-
-	Remark 1.
-	    Another way to improve y to within 1 ulp is:
-
-		y := (y+x/y)		... almost 17 sig. bits to 2*sqrt(x)
-		y := y - 0x00100006	... almost 18 sig. bits to sqrt(x)
-
-				2
-			    (x-y )*y
-		y := y + 2* ----------	...within 1 ulp
-			       2
-			     3y  + x
-
-
-	This formula has one division fewer than the one above; however,
-	it requires more multiplications and additions. Also x must be
-	scaled in advance to avoid spurious overflow in evaluating the
-	expression 3y*y+x. Hence it is not recommended uless division
-	is slow. If division is very slow, then one should use the 
-	reciproot algorithm given in section B.
-
-    (3) Final adjustment
-
-	By twiddling y's last bit it is possible to force y to be 
-	correctly rounded according to the prevailing rounding mode
-	as follows. Let r and i be copies of the rounding mode and
-	inexact flag before entering the square root program. Also we
-	use the expression y+-ulp for the next representable floating
-	numbers (up and down) of y. Note that y+-ulp = either fixed
-	point y+-1, or multiply y by nextafter(1,+-inf) in chopped
-	mode.
-
-		I := FALSE;	... reset INEXACT flag I
-		R := RZ;	... set rounding mode to round-toward-zero
-		z := x/y;	... chopped quotient, possibly inexact
-		If(not I) then {	... if the quotient is exact
-		    if(z=y) {
-		        I := i;	 ... restore inexact flag
-		        R := r;  ... restore rounded mode
-		        return sqrt(x):=y.
-		    } else {
-			z := z - ulp;	... special rounding
-		    }
-		}
-		i := TRUE;		... sqrt(x) is inexact
-		If (r=RN) then z=z+ulp	... rounded-to-nearest
-		If (r=RP) then {	... round-toward-+inf
-		    y = y+ulp; z=z+ulp;
-		}
-		y := y+z;		... chopped sum
-		y0:=y0-0x00100000;	... y := y/2 is correctly rounded.
-	        I := i;	 		... restore inexact flag
-	        R := r;  		... restore rounded mode
-	        return sqrt(x):=y.
-		    
-    (4)	Special cases
-
-	Square root of +inf, +-0, or NaN is itself;
-	Square root of a negative number is NaN with invalid signal.
-
-
-B.  sqrt(x) by Reciproot Iteration
-
-   (1)	Initial approximation
-
-	Let x0 and x1 be the leading and the trailing 32-bit words of
-	a floating point number x (in IEEE double format) respectively
-	(see section A). By performing shifs and subtracts on x0 and y0,
-	we obtain a 7.8-bit approximation of 1/sqrt(x) as follows.
-
-	    k := 0x5fe80000 - (x0>>1);
-	    y0:= k - T2[63&(k>>14)].	... y ~ 1/sqrt(x) to 7.8 bits
-
-	Here k is a 32-bit integer and T2[] is an integer array 
-	containing correction terms. Now magically the floating
-	value of y (y's leading 32-bit word is y0, the value of
-	its trailing word y1 is set to zero) approximates 1/sqrt(x)
-	to almost 7.8-bit.
-
-	Value of T2:
-	static int T2[64]= {
-	0x1500,	0x2ef8,	0x4d67,	0x6b02,	0x87be,	0xa395,	0xbe7a,	0xd866,
-	0xf14a,	0x1091b,0x11fcd,0x13552,0x14999,0x15c98,0x16e34,0x17e5f,
-	0x18d03,0x19a01,0x1a545,0x1ae8a,0x1b5c4,0x1bb01,0x1bfde,0x1c28d,
-	0x1c2de,0x1c0db,0x1ba73,0x1b11c,0x1a4b5,0x1953d,0x18266,0x16be0,
-	0x1683e,0x179d8,0x18a4d,0x19992,0x1a789,0x1b445,0x1bf61,0x1c989,
-	0x1d16d,0x1d77b,0x1dddf,0x1e2ad,0x1e5bf,0x1e6e8,0x1e654,0x1e3cd,
-	0x1df2a,0x1d635,0x1cb16,0x1be2c,0x1ae4e,0x19bde,0x1868e,0x16e2e,
-	0x1527f,0x1334a,0x11051,0xe951,	0xbe01,	0x8e0d,	0x5924,	0x1edd,};
-
-    (2)	Iterative refinement
-
-	Apply Reciproot iteration three times to y and multiply the
-	result by x to get an approximation z that matches sqrt(x)
-	to about 1 ulp. To be exact, we will have 
-		-1ulp < sqrt(x)-z<1.0625ulp.
-	
-	... set rounding mode to Round-to-nearest
-	   y := y*(1.5-0.5*x*y*y)	... almost 15 sig. bits to 1/sqrt(x)
-	   y := y*((1.5-2^-30)+0.5*x*y*y)... about 29 sig. bits to 1/sqrt(x)
-	... special arrangement for better accuracy
-	   z := x*y			... 29 bits to sqrt(x), with z*y<1
-	   z := z + 0.5*z*(1-z*y)	... about 1 ulp to sqrt(x)
-
-	Remark 2. The constant 1.5-2^-30 is chosen to bias the error so that
-	(a) the term z*y in the final iteration is always less than 1; 
-	(b) the error in the final result is biased upward so that
-		-1 ulp < sqrt(x) - z < 1.0625 ulp
-	    instead of |sqrt(x)-z|<1.03125ulp.
-
-    (3)	Final adjustment
-
-	By twiddling y's last bit it is possible to force y to be 
-	correctly rounded according to the prevailing rounding mode
-	as follows. Let r and i be copies of the rounding mode and
-	inexact flag before entering the square root program. Also we
-	use the expression y+-ulp for the next representable floating
-	numbers (up and down) of y. Note that y+-ulp = either fixed
-	point y+-1, or multiply y by nextafter(1,+-inf) in chopped
-	mode.
-
-	R := RZ;		... set rounding mode to round-toward-zero
-	switch(r) {
-	    case RN:		... round-to-nearest
-	       if(x<= z*(z-ulp)...chopped) z = z - ulp; else
-	       if(x<= z*(z+ulp)...chopped) z = z; else z = z+ulp;
-	       break;
-	    case RZ:case RM:	... round-to-zero or round-to--inf
-	       R:=RP;		... reset rounding mod to round-to-+inf
-	       if(x<z*z ... rounded up) z = z - ulp; else
-	       if(x>=(z+ulp)*(z+ulp) ...rounded up) z = z+ulp;
-	       break;
-	    case RP:		... round-to-+inf
-	       if(x>(z+ulp)*(z+ulp)...chopped) z = z+2*ulp; else
-	       if(x>z*z ...chopped) z = z+ulp;
-	       break;
-	}
-
-	Remark 3. The above comparisons can be done in fixed point. For
-	example, to compare x and w=z*z chopped, it suffices to compare
-	x1 and w1 (the trailing parts of x and w), regarding them as
-	two's complement integers.
-
-	...Is z an exact square root?
-	To determine whether z is an exact square root of x, let z1 be the
-	trailing part of z, and also let x0 and x1 be the leading and
-	trailing parts of x.
-
-	If ((z1&0x03ffffff)!=0)	... not exact if trailing 26 bits of z!=0
-	    I := 1;		... Raise Inexact flag: z is not exact
-	else {
-	    j := 1 - [(x0>>20)&1]	... j = logb(x) mod 2
-	    k := z1 >> 26;		... get z's 25-th and 26-th 
-					    fraction bits
-	    I := i or (k&j) or ((k&(j+j+1))!=(x1&3));
-	}
-	R:= r		... restore rounded mode
-	return sqrt(x):=z.
-
-	If multiplication is cheaper then the foregoing red tape, the 
-	Inexact flag can be evaluated by
-
-	    I := i;
-	    I := (z*z!=x) or I.
-
-	Note that z*z can overwrite I; this value must be sensed if it is 
-	True.
-
-	Remark 4. If z*z = x exactly, then bit 25 to bit 0 of z1 must be
-	zero.
-
-		    --------------------
-		z1: |        f2        | 
-		    --------------------
-		bit 31		   bit 0
-
-	Further more, bit 27 and 26 of z1, bit 0 and 1 of x1, and the odd
-	or even of logb(x) have the following relations:
-
-	-------------------------------------------------
-	bit 27,26 of z1		bit 1,0 of x1	logb(x)
-	-------------------------------------------------
-	00			00		odd and even
-	01			01		even
-	10			10		odd
-	10			00		even
-	11			01		even
-	-------------------------------------------------
-
-    (4)	Special cases (see (4) of Section A).	
- 
- */
diff --git a/newlib/libm/math/ef_acos.c b/newlib/libm/math/ef_acos.c
deleted file mode 100644
index f73f97de7..000000000
--- a/newlib/libm/math/ef_acos.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* ef_acos.c -- float version of e_acos.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one =  1.0000000000e+00, /* 0x3F800000 */
-pi =  3.1415925026e+00, /* 0x40490fda */
-pio2_hi =  1.5707962513e+00, /* 0x3fc90fda */
-pio2_lo =  7.5497894159e-08, /* 0x33a22168 */
-pS0 =  1.6666667163e-01, /* 0x3e2aaaab */
-pS1 = -3.2556581497e-01, /* 0xbea6b090 */
-pS2 =  2.0121252537e-01, /* 0x3e4e0aa8 */
-pS3 = -4.0055535734e-02, /* 0xbd241146 */
-pS4 =  7.9153501429e-04, /* 0x3a4f7f04 */
-pS5 =  3.4793309169e-05, /* 0x3811ef08 */
-qS1 = -2.4033949375e+00, /* 0xc019d139 */
-qS2 =  2.0209457874e+00, /* 0x4001572d */
-qS3 = -6.8828397989e-01, /* 0xbf303361 */
-qS4 =  7.7038154006e-02; /* 0x3d9dc62e */
-
-#ifdef __STDC__
-	float __ieee754_acosf(float x)
-#else
-	float __ieee754_acosf(x)
-	float x;
-#endif
-{
-	float z,p,q,r,w,s,c,df;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix==0x3f800000) {		/* |x|==1 */
-	    if(hx>0) return 0.0;	/* acos(1) = 0  */
-	    else return pi+(float)2.0*pio2_lo;	/* acos(-1)= pi */
-	} else if(ix>0x3f800000) {	/* |x| >= 1 */
-	    return (x-x)/(x-x);		/* acos(|x|>1) is NaN */
-	}
-	if(ix<0x3f000000) {	/* |x| < 0.5 */
-	    if(ix<=0x23000000) return pio2_hi+pio2_lo;/*if|x|<2**-57*/
-	    z = x*x;
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    r = p/q;
-	    return pio2_hi - (x - (pio2_lo-x*r));
-	} else  if (hx<0) {		/* x < -0.5 */
-	    z = (one+x)*(float)0.5;
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    s = __ieee754_sqrtf(z);
-	    r = p/q;
-	    w = r*s-pio2_lo;
-	    return pi - (float)2.0*(s+w);
-	} else {			/* x > 0.5 */
-	    __int32_t idf;
-	    z = (one-x)*(float)0.5;
-	    s = __ieee754_sqrtf(z);
-	    df = s;
-	    GET_FLOAT_WORD(idf,df);
-	    SET_FLOAT_WORD(df,idf&0xfffff000);
-	    c  = (z-df*df)/(s+df);
-	    p = z*(pS0+z*(pS1+z*(pS2+z*(pS3+z*(pS4+z*pS5)))));
-	    q = one+z*(qS1+z*(qS2+z*(qS3+z*qS4)));
-	    r = p/q;
-	    w = r*s+c;
-	    return (float)2.0*(df+w);
-	}
-}
diff --git a/newlib/libm/math/ef_acosh.c b/newlib/libm/math/ef_acosh.c
deleted file mode 100644
index 1119c2c86..000000000
--- a/newlib/libm/math/ef_acosh.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* ef_acosh.c -- float version of e_acosh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one	= 1.0,
-ln2	= 6.9314718246e-01;  /* 0x3f317218 */
-
-#ifdef __STDC__
-	float __ieee754_acoshf(float x)
-#else
-	float __ieee754_acoshf(x)
-	float x;
-#endif
-{	
-	float t;
-	__int32_t hx;
-	GET_FLOAT_WORD(hx,x);
-	if(hx<0x3f800000) {		/* x < 1 */
-	    return (x-x)/(x-x);
-	} else if(hx >=0x4d800000) {	/* x > 2**28 */
-	    if(!FLT_UWORD_IS_FINITE(hx)) {	/* x is inf of NaN */
-	        return x+x;
-	    } else 
-		return __ieee754_logf(x)+ln2;	/* acosh(huge)=log(2x) */
-	} else if (hx==0x3f800000) {
-	    return 0.0;			/* acosh(1) = 0 */
-	} else if (hx > 0x40000000) {	/* 2**28 > x > 2 */
-	    t=x*x;
-	    return __ieee754_logf((float)2.0*x-one/(x+__ieee754_sqrtf(t-one)));
-	} else {			/* 1<x<2 */
-	    t = x-one;
-	    return log1pf(t+__ieee754_sqrtf((float)2.0*t+t*t));
-	}
-}
diff --git a/newlib/libm/math/ef_asin.c b/newlib/libm/math/ef_asin.c
deleted file mode 100644
index c49dcbbca..000000000
--- a/newlib/libm/math/ef_asin.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* ef_asin.c -- float version of e_asin.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one =  1.0000000000e+00, /* 0x3F800000 */
-huge =  1.000e+30,
-pio2_hi = 1.57079637050628662109375f,
-pio2_lo = -4.37113900018624283e-8f,
-pio4_hi = 0.785398185253143310546875f,
-	/* coefficient for R(x^2) */
-pS0 =  1.6666667163e-01, /* 0x3e2aaaab */
-pS1 = -3.2556581497e-01, /* 0xbea6b090 */
-pS2 =  2.0121252537e-01, /* 0x3e4e0aa8 */
-pS3 = -4.0055535734e-02, /* 0xbd241146 */
-pS4 =  7.9153501429e-04, /* 0x3a4f7f04 */
-pS5 =  3.4793309169e-05, /* 0x3811ef08 */
-qS1 = -2.4033949375e+00, /* 0xc019d139 */
-qS2 =  2.0209457874e+00, /* 0x4001572d */
-qS3 = -6.8828397989e-01, /* 0xbf303361 */
-qS4 =  7.7038154006e-02; /* 0x3d9dc62e */
-
-#ifdef __STDC__
-	float __ieee754_asinf(float x)
-#else
-	float __ieee754_asinf(x)
-	float x;
-#endif
-{
-	float t,w,p,q,c,r,s;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix==0x3f800000) {
-		/* asin(1)=+-pi/2 with inexact */
-	    return x*pio2_hi+x*pio2_lo;	
-	} else if(ix> 0x3f800000) {	/* |x|>= 1 */
-	    return (x-x)/(x-x);		/* asin(|x|>1) is NaN */   
-	} else if (ix<0x3f000000) {	/* |x|<0.5 */
-	    if(ix<0x32000000) {		/* if |x| < 2**-27 */
-		if(huge+x>one) return x;/* return x with inexact if x!=0*/
-          } else {
-		t = x*x;
-		p = t*(pS0+t*(pS1+t*(pS2+t*(pS3+t*(pS4+t*pS5)))));
-		q = one+t*(qS1+t*(qS2+t*(qS3+t*qS4)));
-		w = p/q;
-		return x+x*w;
-          }
-	}
-	/* 1> |x|>= 0.5 */
-	w = one-fabsf(x);
-	t = w*(float)0.5;
-	p = t*(pS0+t*(pS1+t*(pS2+t*(pS3+t*(pS4+t*pS5)))));
-	q = one+t*(qS1+t*(qS2+t*(qS3+t*qS4)));
-	s = __ieee754_sqrtf(t);
-	if(ix>=0x3F79999A) { 	/* if |x| > 0.975 */
-	    w = p/q;
-	    t = pio2_hi-((float)2.0*(s+s*w)-pio2_lo);
-	} else {
-	    __int32_t iw;
-	    w  = s;
-	    GET_FLOAT_WORD(iw,w);
-	    SET_FLOAT_WORD(w,iw&0xfffff000);
-	    c  = (t-w*w)/(s+w);
-	    r  = p/q;
-	    p  = (float)2.0*s*r-(pio2_lo-(float)2.0*c);
-	    q  = pio4_hi-(float)2.0*w;
-	    t  = pio4_hi-(p-q);
-	}    
-	if(hx>0) return t; else return -t;    
-}
diff --git a/newlib/libm/math/ef_atan2.c b/newlib/libm/math/ef_atan2.c
deleted file mode 100644
index 45b5acb0c..000000000
--- a/newlib/libm/math/ef_atan2.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* ef_atan2.c -- float version of e_atan2.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-tiny  = 1.0e-30,
-zero  = 0.0,
-pi_o_4  = 7.8539818525e-01, /* 0x3f490fdb */
-pi_o_2  = 1.5707963705e+00, /* 0x3fc90fdb */
-pi      = 3.1415925026e+00, /* 0x40490fda */
-pi_lo   = 1.5099578832e-07; /* 0x34222168 */
-
-#ifdef __STDC__
-	float __ieee754_atan2f(float y, float x)
-#else
-	float __ieee754_atan2f(y,x)
-	float  y,x;
-#endif
-{  
-	float z;
-	__int32_t k,m,hx,hy,ix,iy;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	GET_FLOAT_WORD(hy,y);
-	iy = hy&0x7fffffff;
-	if(FLT_UWORD_IS_NAN(ix)||
-	   FLT_UWORD_IS_NAN(iy))	/* x or y is NaN */
-	   return x+y;
-	if(hx==0x3f800000) return atanf(y);   /* x=1.0 */
-	m = ((hy>>31)&1)|((hx>>30)&2);	/* 2*sign(x)+sign(y) */
-
-    /* when y = 0 */
-	if(FLT_UWORD_IS_ZERO(iy)) {
-	    switch(m) {
-		case 0: 
-		case 1: return y; 	/* atan(+-0,+anything)=+-0 */
-		case 2: return  pi+tiny;/* atan(+0,-anything) = pi */
-		case 3: return -pi-tiny;/* atan(-0,-anything) =-pi */
-	    }
-	}
-    /* when x = 0 */
-	if(FLT_UWORD_IS_ZERO(ix)) return (hy<0)?  -pi_o_2-tiny: pi_o_2+tiny;
-	    
-    /* when x is INF */
-	if(FLT_UWORD_IS_INFINITE(ix)) {
-	    if(FLT_UWORD_IS_INFINITE(iy)) {
-		switch(m) {
-		    case 0: return  pi_o_4+tiny;/* atan(+INF,+INF) */
-		    case 1: return -pi_o_4-tiny;/* atan(-INF,+INF) */
-		    case 2: return  (float)3.0*pi_o_4+tiny;/*atan(+INF,-INF)*/
-		    case 3: return (float)-3.0*pi_o_4-tiny;/*atan(-INF,-INF)*/
-		}
-	    } else {
-		switch(m) {
-		    case 0: return  zero  ;	/* atan(+...,+INF) */
-		    case 1: return -zero  ;	/* atan(-...,+INF) */
-		    case 2: return  pi+tiny  ;	/* atan(+...,-INF) */
-		    case 3: return -pi-tiny  ;	/* atan(-...,-INF) */
-		}
-	    }
-	}
-    /* when y is INF */
-	if(FLT_UWORD_IS_INFINITE(iy)) return (hy<0)? -pi_o_2-tiny: pi_o_2+tiny;
-
-    /* compute y/x */
-	k = (iy-ix)>>23;
-	if(k > 60) z=pi_o_2+(float)0.5*pi_lo; 	/* |y/x| >  2**60 */
-	else if(hx<0&&k<-60) z=0.0; 	/* |y|/x < -2**60 */
-	else z=atanf(fabsf(y/x));	/* safe to do y/x */
-	switch (m) {
-	    case 0: return       z  ;	/* atan(+,+) */
-	    case 1: {
-	    	      __uint32_t zh;
-		      GET_FLOAT_WORD(zh,z);
-		      SET_FLOAT_WORD(z,zh ^ 0x80000000);
-		    }
-		    return       z  ;	/* atan(-,+) */
-	    case 2: return  pi-(z-pi_lo);/* atan(+,-) */
-	    default: /* case 3 */
-	    	    return  (z-pi_lo)-pi;/* atan(-,-) */
-	}
-}
diff --git a/newlib/libm/math/ef_atanh.c b/newlib/libm/math/ef_atanh.c
deleted file mode 100644
index 74b3d3d6a..000000000
--- a/newlib/libm/math/ef_atanh.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* ef_atanh.c -- float version of e_atanh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one = 1.0, huge = 1e30;
-#else
-static float one = 1.0, huge = 1e30;
-#endif
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_atanhf(float x)
-#else
-	float __ieee754_atanhf(x)
-	float x;
-#endif
-{
-	float t;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if (ix>0x3f800000) 		/* |x|>1 */
-	    return (x-x)/(x-x);
-	if(ix==0x3f800000) 
-	    return x/zero;
-	if(ix<0x31800000&&(huge+x)>zero) return x;	/* x<2**-28 */
-	SET_FLOAT_WORD(x,ix);
-	if(ix<0x3f000000) {		/* x < 0.5 */
-	    t = x+x;
-	    t = (float)0.5*log1pf(t+t*x/(one-x));
-	} else 
-	    t = (float)0.5*log1pf((x+x)/(one-x));
-	if(hx>=0) return t; else return -t;
-}
diff --git a/newlib/libm/math/ef_cosh.c b/newlib/libm/math/ef_cosh.c
deleted file mode 100644
index bdce61a00..000000000
--- a/newlib/libm/math/ef_cosh.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* ef_cosh.c -- float version of e_cosh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const
-#endif
-
-#ifdef __STDC__
-static const float one = 1.0, half=0.5, huge = 1.0e30;
-#else
-static float one = 1.0, half=0.5, huge = 1.0e30;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_coshf(float x)
-#else
-	float __ieee754_coshf(x)
-	float x;
-#endif
-{	
-	float t,w;
-	__int32_t ix;
-
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-    /* x is INF or NaN */
-	if(!FLT_UWORD_IS_FINITE(ix)) return x*x;	
-
-    /* |x| in [0,0.5*ln2], return 1+expm1(|x|)^2/(2*exp(|x|)) */
-	if(ix<0x3eb17218) {
-	    t = expm1f(fabsf(x));
-	    w = one+t;
-	    if (ix<0x24000000) return w;	/* cosh(tiny) = 1 */
-	    return one+(t*t)/(w+w);
-	}
-
-    /* |x| in [0.5*ln2,22], return (exp(|x|)+1/exp(|x|)/2; */
-	if (ix < 0x41b00000) {
-		t = __ieee754_expf(fabsf(x));
-		return half*t+half/t;
-	}
-
-    /* |x| in [22, log(maxdouble)] return half*exp(|x|) */
-	if (ix <= FLT_UWORD_LOG_MAX)
-	  return half*__ieee754_expf(fabsf(x));
-
-    /* |x| in [log(maxdouble), overflowthresold] */
-	if (ix <= FLT_UWORD_LOG_2MAX) {
-	    w = __ieee754_expf(half*fabsf(x));
-	    t = half*w;
-	    return t*w;
-	}
-
-    /* |x| > overflowthresold, cosh(x) overflow */
-	return huge*huge;
-}
diff --git a/newlib/libm/math/ef_exp.c b/newlib/libm/math/ef_exp.c
deleted file mode 100644
index 19c570cfd..000000000
--- a/newlib/libm/math/ef_exp.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* ef_exp.c -- float version of e_exp.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-one	= 1.0,
-halF[2]	= {0.5,-0.5,},
-huge	= 1.0e+30,
-twom100 = 7.8886090522e-31,      /* 2**-100=0x0d800000 */
-ln2HI[2]   ={ 6.9313812256e-01,		/* 0x3f317180 */
-	     -6.9313812256e-01,},	/* 0xbf317180 */
-ln2LO[2]   ={ 9.0580006145e-06,  	/* 0x3717f7d1 */
-	     -9.0580006145e-06,},	/* 0xb717f7d1 */
-invln2 =  1.4426950216e+00, 		/* 0x3fb8aa3b */
-P1   =  1.6666667163e-01, /* 0x3e2aaaab */
-P2   = -2.7777778450e-03, /* 0xbb360b61 */
-P3   =  6.6137559770e-05, /* 0x388ab355 */
-P4   = -1.6533901999e-06, /* 0xb5ddea0e */
-P5   =  4.1381369442e-08; /* 0x3331bb4c */
-
-#ifdef __STDC__
-	float __ieee754_expf(float x)	/* default IEEE double exp */
-#else
-	float __ieee754_expf(x)	/* default IEEE double exp */
-	float x;
-#endif
-{
-	float y,hi,lo,c,t;
-	__int32_t k,xsb,sx;
-	__uint32_t hx;
-
-	GET_FLOAT_WORD(sx,x);
-	xsb = (sx>>31)&1;		/* sign bit of x */
-	hx = sx & 0x7fffffff;		/* high word of |x| */
-
-    /* filter out non-finite argument */
-        if(FLT_UWORD_IS_NAN(hx))
-            return x+x;	 	/* NaN */
-        if(FLT_UWORD_IS_INFINITE(hx))
-	    return (xsb==0)? x:0.0;		/* exp(+-inf)={inf,0} */
-	if(sx > FLT_UWORD_LOG_MAX)
-	    return huge*huge; /* overflow */
-	if(sx < 0 && hx > FLT_UWORD_LOG_MIN)
-	    return twom100*twom100; /* underflow */
-	
-    /* argument reduction */
-	if(hx > 0x3eb17218) {		/* if  |x| > 0.5 ln2 */ 
-	    if(hx < 0x3F851592) {	/* and |x| < 1.5 ln2 */
-		hi = x-ln2HI[xsb]; lo=ln2LO[xsb]; k = 1-xsb-xsb;
-	    } else {
-		k  = invln2*x+halF[xsb];
-		t  = k;
-		hi = x - t*ln2HI[0];	/* t*ln2HI is exact here */
-		lo = t*ln2LO[0];
-	    }
-	    x  = hi - lo;
-	} 
-	else if(hx < 0x31800000)  {	/* when |x|<2**-28 */
-	    if(huge+x>one) return one+x;/* trigger inexact */
-	}
-	else k = 0;
-
-    /* x is now in primary range */
-	t  = x*x;
-	c  = x - t*(P1+t*(P2+t*(P3+t*(P4+t*P5))));
-	if(k==0) 	return one-((x*c)/(c-(float)2.0)-x); 
-	else 		y = one-((lo-(x*c)/((float)2.0-c))-hi);
-	if(k >= -125) {
-	    __uint32_t hy;
-	    GET_FLOAT_WORD(hy,y);
-	    SET_FLOAT_WORD(y,hy+(k<<23));	/* add k to y's exponent */
-	    return y;
-	} else {
-	    __uint32_t hy;
-	    GET_FLOAT_WORD(hy,y);
-	    SET_FLOAT_WORD(y,hy+((k+100)<<23));	/* add k to y's exponent */
-	    return y*twom100;
-	}
-}
diff --git a/newlib/libm/math/ef_fmod.c b/newlib/libm/math/ef_fmod.c
deleted file mode 100644
index 53c1ba280..000000000
--- a/newlib/libm/math/ef_fmod.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* ef_fmod.c -- float version of e_fmod.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * __ieee754_fmodf(x,y)
- * Return x mod y in exact arithmetic
- * Method: shift and subtract
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one = 1.0, Zero[] = {0.0, -0.0,};
-#else
-static float one = 1.0, Zero[] = {0.0, -0.0,};
-#endif
-
-#ifdef __STDC__
-	float __ieee754_fmodf(float x, float y)
-#else
-	float __ieee754_fmodf(x,y)
-	float x,y ;
-#endif
-{
-	__int32_t n,hx,hy,hz,ix,iy,sx,i;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hy,y);
-	sx = hx&0x80000000;		/* sign of x */
-	hx ^=sx;		/* |x| */
-	hy &= 0x7fffffff;	/* |y| */
-
-    /* purge off exception values */
-	if(FLT_UWORD_IS_ZERO(hy)||
-	   !FLT_UWORD_IS_FINITE(hx)||
-	   FLT_UWORD_IS_NAN(hy))
-	    return (x*y)/(x*y);
-	if(hx<hy) return x;			/* |x|<|y| return x */
-	if(hx==hy)
-	    return Zero[(__uint32_t)sx>>31];	/* |x|=|y| return x*0*/
-
-    /* Note: y cannot be zero if we reach here. */
-
-    /* determine ix = ilogb(x) */
-	if(FLT_UWORD_IS_SUBNORMAL(hx)) {	/* subnormal x */
-	    for (ix = -126,i=(hx<<8); i>0; i<<=1) ix -=1;
-	} else ix = (hx>>23)-127;
-
-    /* determine iy = ilogb(y) */
-	if(FLT_UWORD_IS_SUBNORMAL(hy)) {	/* subnormal y */
-	    for (iy = -126,i=(hy<<8); i>=0; i<<=1) iy -=1;
-	} else iy = (hy>>23)-127;
-
-    /* set up {hx,lx}, {hy,ly} and align y to x */
-	if(ix >= -126) 
-	    hx = 0x00800000|(0x007fffff&hx);
-	else {		/* subnormal x, shift x to normal */
-	    n = -126-ix;
-	    hx = hx<<n;
-	}
-	if(iy >= -126) 
-	    hy = 0x00800000|(0x007fffff&hy);
-	else {		/* subnormal y, shift y to normal */
-	    n = -126-iy;
-	    hy = hy<<n;
-	}
-
-    /* fix point fmod */
-	n = ix - iy;
-	while(n--) {
-	    hz=hx-hy;
-	    if(hz<0){hx = hx+hx;}
-	    else {
-	    	if(hz==0) 		/* return sign(x)*0 */
-		    return Zero[(__uint32_t)sx>>31];
-	    	hx = hz+hz;
-	    }
-	}
-	hz=hx-hy;
-	if(hz>=0) {hx=hz;}
-
-    /* convert back to floating value and restore the sign */
-	if(hx==0) 			/* return sign(x)*0 */
-	    return Zero[(__uint32_t)sx>>31];	
-	while(hx<0x00800000) {		/* normalize x */
-	    hx = hx+hx;
-	    iy -= 1;
-	}
-	if(iy>= -126) {		/* normalize output */
-	    hx = ((hx-0x00800000)|((iy+127)<<23));
-	    SET_FLOAT_WORD(x,hx|sx);
-	} else {		/* subnormal output */
-	    /* If denormals are not supported, this code will generate a
-	       zero representation.  */
-	    n = -126 - iy;
-	    hx >>= n;
-	    SET_FLOAT_WORD(x,hx|sx);
-	    x *= one;		/* create necessary signal */
-	}
-	return x;		/* exact output */
-}
diff --git a/newlib/libm/math/ef_hypot.c b/newlib/libm/math/ef_hypot.c
deleted file mode 100644
index b78b968ef..000000000
--- a/newlib/libm/math/ef_hypot.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* ef_hypot.c -- float version of e_hypot.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float __ieee754_hypotf(float x, float y)
-#else
-	float __ieee754_hypotf(x,y)
-	float x, y;
-#endif
-{
-	float a=x,b=y,t1,t2,y1,y2,w;
-	__int32_t j,k,ha,hb;
-
-	GET_FLOAT_WORD(ha,x);
-	ha &= 0x7fffffffL;
-	GET_FLOAT_WORD(hb,y);
-	hb &= 0x7fffffffL;
-	if(hb > ha) {a=y;b=x;j=ha; ha=hb;hb=j;} else {a=x;b=y;}
-	SET_FLOAT_WORD(a,ha);	/* a <- |a| */
-	SET_FLOAT_WORD(b,hb);	/* b <- |b| */
-	if((ha-hb)>0xf000000L) {return a+b;} /* x/y > 2**30 */
-	k=0;
-	if(ha > 0x58800000L) {	/* a>2**50 */
-	   if(!FLT_UWORD_IS_FINITE(ha)) {	/* Inf or NaN */
-	       w = a+b;			/* for sNaN */
-	       if(FLT_UWORD_IS_INFINITE(ha)) w = a;
-	       if(FLT_UWORD_IS_INFINITE(hb)) w = b;
-	       return w;
-	   }
-	   /* scale a and b by 2**-68 */
-	   ha -= 0x22000000L; hb -= 0x22000000L;	k += 68;
-	   SET_FLOAT_WORD(a,ha);
-	   SET_FLOAT_WORD(b,hb);
-	}
-	if(hb < 0x26800000L) {	/* b < 2**-50 */
-	    if(FLT_UWORD_IS_ZERO(hb)) {
-	        return a;
-	    } else if(FLT_UWORD_IS_SUBNORMAL(hb)) {
-		SET_FLOAT_WORD(t1,0x3f000000L);	/* t1=2^126 */
-		b *= t1;
-		a *= t1;
-		k -= 126;
-	    } else {		/* scale a and b by 2^68 */
-	        ha += 0x22000000; 	/* a *= 2^68 */
-		hb += 0x22000000;	/* b *= 2^68 */
-		k -= 68;
-		SET_FLOAT_WORD(a,ha);
-		SET_FLOAT_WORD(b,hb);
-	    }
-	}
-    /* medium size a and b */
-	w = a-b;
-	if (w>b) {
-	    SET_FLOAT_WORD(t1,ha&0xfffff000L);
-	    t2 = a-t1;
-	    w  = __ieee754_sqrtf(t1*t1-(b*(-b)-t2*(a+t1)));
-	} else {
-	    a  = a+a;
-	    SET_FLOAT_WORD(y1,hb&0xfffff000L);
-	    y2 = b - y1;
-	    SET_FLOAT_WORD(t1,ha+0x00800000L);
-	    t2 = a - t1;
-	    w  = __ieee754_sqrtf(t1*y1-(w*(-w)-(t1*y2+t2*b)));
-	}
-	if(k!=0) {
-	    SET_FLOAT_WORD(t1,0x3f800000L+(k<<23));
-	    return t1*w;
-	} else return w;
-}
diff --git a/newlib/libm/math/ef_j0.c b/newlib/libm/math/ef_j0.c
deleted file mode 100644
index 866cfcf96..000000000
--- a/newlib/libm/math/ef_j0.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/* ef_j0.c -- float version of e_j0.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static float pzerof(float), qzerof(float);
-#else
-static float pzerof(), qzerof();
-#endif
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-huge 	= 1e30,
-one	= 1.0,
-invsqrtpi=  5.6418961287e-01, /* 0x3f106ebb */
-tpi      =  6.3661974669e-01, /* 0x3f22f983 */
- 		/* R0/S0 on [0, 2.00] */
-R02  =  1.5625000000e-02, /* 0x3c800000 */
-R03  = -1.8997929874e-04, /* 0xb947352e */
-R04  =  1.8295404516e-06, /* 0x35f58e88 */
-R05  = -4.6183270541e-09, /* 0xb19eaf3c */
-S01  =  1.5619102865e-02, /* 0x3c7fe744 */
-S02  =  1.1692678527e-04, /* 0x38f53697 */
-S03  =  5.1354652442e-07, /* 0x3509daa6 */
-S04  =  1.1661400734e-09; /* 0x30a045e8 */
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_j0f(float x) 
-#else
-	float __ieee754_j0f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,r,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(!FLT_UWORD_IS_FINITE(ix)) return one/(x*x);
-	x = fabsf(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sinf(x);
-		c = cosf(x);
-		ss = s-c;
-		cc = s+c;
-		if(ix<=FLT_UWORD_HALF_MAX) {  /* make sure x+x not overflow */
-		    z = -cosf(x+x);
-		    if ((s*c)<zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x80000000) z = (invsqrtpi*cc)/__ieee754_sqrtf(x);
-		else {
-		    u = pzerof(x); v = qzerof(x);
-		    z = invsqrtpi*(u*cc-v*ss)/__ieee754_sqrtf(x);
-		}
-		return z;
-	}
-	if(ix<0x39000000) {	/* |x| < 2**-13 */
-	    if(huge+x>one) {	/* raise inexact if x != 0 */
-	        if(ix<0x32000000) return one;	/* |x|<2**-27 */
-	        else 	      return one - (float)0.25*x*x;
-	    }
-	}
-	z = x*x;
-	r =  z*(R02+z*(R03+z*(R04+z*R05)));
-	s =  one+z*(S01+z*(S02+z*(S03+z*S04)));
-	if(ix < 0x3F800000) {	/* |x| < 1.00 */
-	    return one + z*((float)-0.25+(r/s));
-	} else {
-	    u = (float)0.5*x;
-	    return((one+u)*(one-u)+z*(r/s));
-	}
-}
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-u00  = -7.3804296553e-02, /* 0xbd9726b5 */
-u01  =  1.7666645348e-01, /* 0x3e34e80d */
-u02  = -1.3818567619e-02, /* 0xbc626746 */
-u03  =  3.4745343146e-04, /* 0x39b62a69 */
-u04  = -3.8140706238e-06, /* 0xb67ff53c */
-u05  =  1.9559013964e-08, /* 0x32a802ba */
-u06  = -3.9820518410e-11, /* 0xae2f21eb */
-v01  =  1.2730483897e-02, /* 0x3c509385 */
-v02  =  7.6006865129e-05, /* 0x389f65e0 */
-v03  =  2.5915085189e-07, /* 0x348b216c */
-v04  =  4.4111031494e-10; /* 0x2ff280c2 */
-
-#ifdef __STDC__
-	float __ieee754_y0f(float x) 
-#else
-	float __ieee754_y0f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-        ix = 0x7fffffff&hx;
-    /* Y0(NaN) is NaN, y0(-inf) is Nan, y0(inf) is 0  */
-	if(!FLT_UWORD_IS_FINITE(ix)) return  one/(x+x*x); 
-        if(FLT_UWORD_IS_ZERO(ix)) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-        /* y0(x) = sqrt(2/(pi*x))*(p0(x)*sin(x0)+q0(x)*cos(x0))
-         * where x0 = x-pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
-         *                      =  1/sqrt(2) * (sin(x) + cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                s = sinf(x);
-                c = cosf(x);
-                ss = s-c;
-                cc = s+c;
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-                if(ix<=FLT_UWORD_HALF_MAX) {  /* make sure x+x not overflow */
-                    z = -cosf(x+x);
-                    if ((s*c)<zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-                if(ix>0x80000000) z = (invsqrtpi*ss)/__ieee754_sqrtf(x);
-                else {
-                    u = pzerof(x); v = qzerof(x);
-                    z = invsqrtpi*(u*ss+v*cc)/__ieee754_sqrtf(x);
-                }
-                return z;
-	}
-	if(ix<=0x32000000) {	/* x < 2**-27 */
-	    return(u00 + tpi*__ieee754_logf(x));
-	}
-	z = x*x;
-	u = u00+z*(u01+z*(u02+z*(u03+z*(u04+z*(u05+z*u06)))));
-	v = one+z*(v01+z*(v02+z*(v03+z*v04)));
-	return(u/v + tpi*(__ieee754_j0f(x)*__ieee754_logf(x)));
-}
-
-/* The asymptotic expansions of pzero is
- *	1 - 9/128 s^2 + 11025/98304 s^4 - ...,	where s = 1/x.
- * For x >= 2, We approximate pzero by
- * 	pzero(x) = 1 + (R/S)
- * where  R = pR0 + pR1*s^2 + pR2*s^4 + ... + pR5*s^10
- * 	  S = 1 + pS0*s^2 + ... + pS4*s^10
- * and
- *	| pzero(x)-1-R/S | <= 2  ** ( -60.26)
- */
-#ifdef __STDC__
-static const float pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
- -7.0312500000e-02, /* 0xbd900000 */
- -8.0816707611e+00, /* 0xc1014e86 */
- -2.5706311035e+02, /* 0xc3808814 */
- -2.4852163086e+03, /* 0xc51b5376 */
- -5.2530439453e+03, /* 0xc5a4285a */
-};
-#ifdef __STDC__
-static const float pS8[5] = {
-#else
-static float pS8[5] = {
-#endif
-  1.1653436279e+02, /* 0x42e91198 */
-  3.8337448730e+03, /* 0x456f9beb */
-  4.0597855469e+04, /* 0x471e95db */
-  1.1675296875e+05, /* 0x47e4087c */
-  4.7627726562e+04, /* 0x473a0bba */
-};
-#ifdef __STDC__
-static const float pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -1.1412546255e-11, /* 0xad48c58a */
- -7.0312492549e-02, /* 0xbd8fffff */
- -4.1596107483e+00, /* 0xc0851b88 */
- -6.7674766541e+01, /* 0xc287597b */
- -3.3123129272e+02, /* 0xc3a59d9b */
- -3.4643338013e+02, /* 0xc3ad3779 */
-};
-#ifdef __STDC__
-static const float pS5[5] = {
-#else
-static float pS5[5] = {
-#endif
-  6.0753936768e+01, /* 0x42730408 */
-  1.0512523193e+03, /* 0x44836813 */
-  5.9789707031e+03, /* 0x45bad7c4 */
-  9.6254453125e+03, /* 0x461665c8 */
-  2.4060581055e+03, /* 0x451660ee */
-};
-
-#ifdef __STDC__
-static const float pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static float pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -2.5470459075e-09, /* 0xb12f081b */
- -7.0311963558e-02, /* 0xbd8fffb8 */
- -2.4090321064e+00, /* 0xc01a2d95 */
- -2.1965976715e+01, /* 0xc1afba52 */
- -5.8079170227e+01, /* 0xc2685112 */
- -3.1447946548e+01, /* 0xc1fb9565 */
-};
-#ifdef __STDC__
-static const float pS3[5] = {
-#else
-static float pS3[5] = {
-#endif
-  3.5856033325e+01, /* 0x420f6c94 */
-  3.6151397705e+02, /* 0x43b4c1ca */
-  1.1936077881e+03, /* 0x44953373 */
-  1.1279968262e+03, /* 0x448cffe6 */
-  1.7358093262e+02, /* 0x432d94b8 */
-};
-
-#ifdef __STDC__
-static const float pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -8.8753431271e-08, /* 0xb3be98b7 */
- -7.0303097367e-02, /* 0xbd8ffb12 */
- -1.4507384300e+00, /* 0xbfb9b1cc */
- -7.6356959343e+00, /* 0xc0f4579f */
- -1.1193166733e+01, /* 0xc1331736 */
- -3.2336456776e+00, /* 0xc04ef40d */
-};
-#ifdef __STDC__
-static const float pS2[5] = {
-#else
-static float pS2[5] = {
-#endif
-  2.2220300674e+01, /* 0x41b1c32d */
-  1.3620678711e+02, /* 0x430834f0 */
-  2.7047027588e+02, /* 0x43873c32 */
-  1.5387539673e+02, /* 0x4319e01a */
-  1.4657617569e+01, /* 0x416a859a */
-};
-
-#ifdef __STDC__
-	static float pzerof(float x)
-#else
-	static float pzerof(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float z,r,s;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x41000000)     {p = pR8; q= pS8;}
-	else if(ix>=0x40f71c58){p = pR5; q= pS5;}
-	else if(ix>=0x4036db68){p = pR3; q= pS3;}
-      else {p = pR2; q= pS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-	return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qzero is
- *	-1/8 s + 75/1024 s^3 - ..., where s = 1/x.
- * We approximate qzero by
- * 	qzero(x) = s*(-1.25 + (R/S))
- * where  R = qR0 + qR1*s^2 + qR2*s^4 + ... + qR5*s^10
- * 	  S = 1 + qS0*s^2 + ... + qS5*s^12
- * and
- *	| qzero(x)/s +1.25-R/S | <= 2  ** ( -61.22)
- */
-#ifdef __STDC__
-static const float qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
-  7.3242187500e-02, /* 0x3d960000 */
-  1.1768206596e+01, /* 0x413c4a93 */
-  5.5767340088e+02, /* 0x440b6b19 */
-  8.8591972656e+03, /* 0x460a6cca */
-  3.7014625000e+04, /* 0x471096a0 */
-};
-#ifdef __STDC__
-static const float qS8[6] = {
-#else
-static float qS8[6] = {
-#endif
-  1.6377603149e+02, /* 0x4323c6aa */
-  8.0983447266e+03, /* 0x45fd12c2 */
-  1.4253829688e+05, /* 0x480b3293 */
-  8.0330925000e+05, /* 0x49441ed4 */
-  8.4050156250e+05, /* 0x494d3359 */
- -3.4389928125e+05, /* 0xc8a7eb69 */
-};
-
-#ifdef __STDC__
-static const float qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.8408595828e-11, /* 0x2da1ec79 */
-  7.3242180049e-02, /* 0x3d95ffff */
-  5.8356351852e+00, /* 0x40babd86 */
-  1.3511157227e+02, /* 0x43071c90 */
-  1.0272437744e+03, /* 0x448067cd */
-  1.9899779053e+03, /* 0x44f8bf4b */
-};
-#ifdef __STDC__
-static const float qS5[6] = {
-#else
-static float qS5[6] = {
-#endif
-  8.2776611328e+01, /* 0x42a58da0 */
-  2.0778142090e+03, /* 0x4501dd07 */
-  1.8847289062e+04, /* 0x46933e94 */
-  5.6751113281e+04, /* 0x475daf1d */
-  3.5976753906e+04, /* 0x470c88c1 */
- -5.3543427734e+03, /* 0xc5a752be */
-};
-
-#ifdef __STDC__
-static const float qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static float qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  4.3774099900e-09, /* 0x3196681b */
-  7.3241114616e-02, /* 0x3d95ff70 */
-  3.3442313671e+00, /* 0x405607e3 */
-  4.2621845245e+01, /* 0x422a7cc5 */
-  1.7080809021e+02, /* 0x432acedf */
-  1.6673394775e+02, /* 0x4326bbe4 */
-};
-#ifdef __STDC__
-static const float qS3[6] = {
-#else
-static float qS3[6] = {
-#endif
-  4.8758872986e+01, /* 0x42430916 */
-  7.0968920898e+02, /* 0x44316c1c */
-  3.7041481934e+03, /* 0x4567825f */
-  6.4604252930e+03, /* 0x45c9e367 */
-  2.5163337402e+03, /* 0x451d4557 */
- -1.4924745178e+02, /* 0xc3153f59 */
-};
-
-#ifdef __STDC__
-static const float qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.5044444979e-07, /* 0x342189db */
-  7.3223426938e-02, /* 0x3d95f62a */
-  1.9981917143e+00, /* 0x3fffc4bf */
-  1.4495602608e+01, /* 0x4167edfd */
-  3.1666231155e+01, /* 0x41fd5471 */
-  1.6252708435e+01, /* 0x4182058c */
-};
-#ifdef __STDC__
-static const float qS2[6] = {
-#else
-static float qS2[6] = {
-#endif
-  3.0365585327e+01, /* 0x41f2ecb8 */
-  2.6934811401e+02, /* 0x4386ac8f */
-  8.4478375244e+02, /* 0x44533229 */
-  8.8293585205e+02, /* 0x445cbbe5 */
-  2.1266638184e+02, /* 0x4354aa98 */
- -5.3109550476e+00, /* 0xc0a9f358 */
-};
-
-#ifdef __STDC__
-	static float qzerof(float x)
-#else
-	static float qzerof(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float s,r,z;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x41000000)     {p = qR8; q= qS8;}
-	else if(ix>=0x40f71c58){p = qR5; q= qS5;}
-	else if(ix>=0x4036db68){p = qR3; q= qS3;}
-      else {p = qR2; q= qS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (-(float).125 + r/s)/x;
-}
diff --git a/newlib/libm/math/ef_j1.c b/newlib/libm/math/ef_j1.c
deleted file mode 100644
index 01bd24cf1..000000000
--- a/newlib/libm/math/ef_j1.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/* ef_j1.c -- float version of e_j1.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static float ponef(float), qonef(float);
-#else
-static float ponef(), qonef();
-#endif
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-huge    = 1e30,
-one	= 1.0,
-invsqrtpi=  5.6418961287e-01, /* 0x3f106ebb */
-tpi      =  6.3661974669e-01, /* 0x3f22f983 */
-	/* R0/S0 on [0,2] */
-r00  = -6.2500000000e-02, /* 0xbd800000 */
-r01  =  1.4070566976e-03, /* 0x3ab86cfd */
-r02  = -1.5995563444e-05, /* 0xb7862e36 */
-r03  =  4.9672799207e-08, /* 0x335557d2 */
-s01  =  1.9153760746e-02, /* 0x3c9ce859 */
-s02  =  1.8594678841e-04, /* 0x3942fab6 */
-s03  =  1.1771846857e-06, /* 0x359dffc2 */
-s04  =  5.0463624390e-09, /* 0x31ad6446 */
-s05  =  1.2354227016e-11; /* 0x2d59567e */
-
-#ifdef __STDC__
-static const float zero    = 0.0;
-#else
-static float zero    = 0.0;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_j1f(float x) 
-#else
-	float __ieee754_j1f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,r,u,v,y;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(!FLT_UWORD_IS_FINITE(ix)) return one/x;
-	y = fabsf(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sinf(y);
-		c = cosf(y);
-		ss = -s-c;
-		cc = s-c;
-		if(ix<=FLT_UWORD_HALF_MAX) {  /* make sure y+y not overflow */
-		    z = cosf(y+y);
-		    if ((s*c)>zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j1(x) = 1/sqrt(pi) * (P(1,x)*cc - Q(1,x)*ss) / sqrt(x)
-	 * y1(x) = 1/sqrt(pi) * (P(1,x)*ss + Q(1,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x80000000) z = (invsqrtpi*cc)/__ieee754_sqrtf(y);
-		else {
-		    u = ponef(y); v = qonef(y);
-		    z = invsqrtpi*(u*cc-v*ss)/__ieee754_sqrtf(y);
-		}
-		if(hx<0) return -z;
-		else  	 return  z;
-	}
-	if(ix<0x32000000) {	/* |x|<2**-27 */
-	    if(huge+x>one) return (float)0.5*x;/* inexact if x!=0 necessary */
-	}
-	z = x*x;
-	r =  z*(r00+z*(r01+z*(r02+z*r03)));
-	s =  one+z*(s01+z*(s02+z*(s03+z*(s04+z*s05))));
-	r *= x;
-	return(x*(float)0.5+r/s);
-}
-
-#ifdef __STDC__
-static const float U0[5] = {
-#else
-static float U0[5] = {
-#endif
- -1.9605709612e-01, /* 0xbe48c331 */
-  5.0443872809e-02, /* 0x3d4e9e3c */
- -1.9125689287e-03, /* 0xbafaaf2a */
-  2.3525259166e-05, /* 0x37c5581c */
- -9.1909917899e-08, /* 0xb3c56003 */
-};
-#ifdef __STDC__
-static const float V0[5] = {
-#else
-static float V0[5] = {
-#endif
-  1.9916731864e-02, /* 0x3ca3286a */
-  2.0255257550e-04, /* 0x3954644b */
-  1.3560879779e-06, /* 0x35b602d4 */
-  6.2274145840e-09, /* 0x31d5f8eb */
-  1.6655924903e-11, /* 0x2d9281cf */
-};
-
-#ifdef __STDC__
-	float __ieee754_y1f(float x) 
-#else
-	float __ieee754_y1f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-        ix = 0x7fffffff&hx;
-    /* if Y1(NaN) is NaN, Y1(-inf) is NaN, Y1(inf) is 0 */
-	if(!FLT_UWORD_IS_FINITE(ix)) return one/(x+x*x); 
-        if(FLT_UWORD_IS_ZERO(ix)) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-                s = sinf(x);
-                c = cosf(x);
-                ss = -s-c;
-                cc = s-c;
-                if(ix<=FLT_UWORD_HALF_MAX) {  /* make sure x+x not overflow */
-                    z = cosf(x+x);
-                    if ((s*c)>zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-        /* y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x0)+q1(x)*cos(x0))
-         * where x0 = x-3pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      = -1/sqrt(2) * (cos(x) + sin(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                if(ix>0x48000000) z = (invsqrtpi*ss)/__ieee754_sqrtf(x);
-                else {
-                    u = ponef(x); v = qonef(x);
-                    z = invsqrtpi*(u*ss+v*cc)/__ieee754_sqrtf(x);
-                }
-                return z;
-        } 
-        if(ix<=0x24800000) {    /* x < 2**-54 */
-            return(-tpi/x);
-        } 
-        z = x*x;
-        u = U0[0]+z*(U0[1]+z*(U0[2]+z*(U0[3]+z*U0[4])));
-        v = one+z*(V0[0]+z*(V0[1]+z*(V0[2]+z*(V0[3]+z*V0[4]))));
-        return(x*(u/v) + tpi*(__ieee754_j1f(x)*__ieee754_logf(x)-one/x));
-}
-
-/* For x >= 8, the asymptotic expansions of pone is
- *	1 + 15/128 s^2 - 4725/2^15 s^4 - ...,	where s = 1/x.
- * We approximate pone by
- * 	pone(x) = 1 + (R/S)
- * where  R = pr0 + pr1*s^2 + pr2*s^4 + ... + pr5*s^10
- * 	  S = 1 + ps0*s^2 + ... + ps4*s^10
- * and
- *	| pone(x)-1-R/S | <= 2  ** ( -60.06)
- */
-
-#ifdef __STDC__
-static const float pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
-  1.1718750000e-01, /* 0x3df00000 */
-  1.3239480972e+01, /* 0x4153d4ea */
-  4.1205184937e+02, /* 0x43ce06a3 */
-  3.8747453613e+03, /* 0x45722bed */
-  7.9144794922e+03, /* 0x45f753d6 */
-};
-#ifdef __STDC__
-static const float ps8[5] = {
-#else
-static float ps8[5] = {
-#endif
-  1.1420736694e+02, /* 0x42e46a2c */
-  3.6509309082e+03, /* 0x45642ee5 */
-  3.6956207031e+04, /* 0x47105c35 */
-  9.7602796875e+04, /* 0x47bea166 */
-  3.0804271484e+04, /* 0x46f0a88b */
-};
-
-#ifdef __STDC__
-static const float pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.3199052094e-11, /* 0x2d68333f */
-  1.1718749255e-01, /* 0x3defffff */
-  6.8027510643e+00, /* 0x40d9b023 */
-  1.0830818176e+02, /* 0x42d89dca */
-  5.1763616943e+02, /* 0x440168b7 */
-  5.2871520996e+02, /* 0x44042dc6 */
-};
-#ifdef __STDC__
-static const float ps5[5] = {
-#else
-static float ps5[5] = {
-#endif
-  5.9280597687e+01, /* 0x426d1f55 */
-  9.9140142822e+02, /* 0x4477d9b1 */
-  5.3532670898e+03, /* 0x45a74a23 */
-  7.8446904297e+03, /* 0x45f52586 */
-  1.5040468750e+03, /* 0x44bc0180 */
-};
-
-#ifdef __STDC__
-static const float pr3[6] = {
-#else
-static float pr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  3.0250391081e-09, /* 0x314fe10d */
-  1.1718686670e-01, /* 0x3defffab */
-  3.9329774380e+00, /* 0x407bb5e7 */
-  3.5119403839e+01, /* 0x420c7a45 */
-  9.1055007935e+01, /* 0x42b61c2a */
-  4.8559066772e+01, /* 0x42423c7c */
-};
-#ifdef __STDC__
-static const float ps3[5] = {
-#else
-static float ps3[5] = {
-#endif
-  3.4791309357e+01, /* 0x420b2a4d */
-  3.3676245117e+02, /* 0x43a86198 */
-  1.0468714600e+03, /* 0x4482dbe3 */
-  8.9081134033e+02, /* 0x445eb3ed */
-  1.0378793335e+02, /* 0x42cf936c */
-};
-
-#ifdef __STDC__
-static const float pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.0771083225e-07, /* 0x33e74ea8 */
-  1.1717621982e-01, /* 0x3deffa16 */
-  2.3685150146e+00, /* 0x401795c0 */
-  1.2242610931e+01, /* 0x4143e1bc */
-  1.7693971634e+01, /* 0x418d8d41 */
-  5.0735230446e+00, /* 0x40a25a4d */
-};
-#ifdef __STDC__
-static const float ps2[5] = {
-#else
-static float ps2[5] = {
-#endif
-  2.1436485291e+01, /* 0x41ab7dec */
-  1.2529022980e+02, /* 0x42fa9499 */
-  2.3227647400e+02, /* 0x436846c7 */
-  1.1767937469e+02, /* 0x42eb5bd7 */
-  8.3646392822e+00, /* 0x4105d590 */
-};
-
-#ifdef __STDC__
-	static float ponef(float x)
-#else
-	static float ponef(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float z,r,s;
-        __int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-        if(ix>=0x41000000)     {p = pr8; q= ps8;}
-        else if(ix>=0x40f71c58){p = pr5; q= ps5;}
-        else if(ix>=0x4036db68){p = pr3; q= ps3;}
-        else {p = pr2; q= ps2;}
-        z = one/(x*x);
-        r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-        s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-        return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qone is
- *	3/8 s - 105/1024 s^3 - ..., where s = 1/x.
- * We approximate qone by
- * 	qone(x) = s*(0.375 + (R/S))
- * where  R = qr1*s^2 + qr2*s^4 + ... + qr5*s^10
- * 	  S = 1 + qs1*s^2 + ... + qs6*s^12
- * and
- *	| qone(x)/s -0.375-R/S | <= 2  ** ( -61.13)
- */
-
-#ifdef __STDC__
-static const float qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
- -1.0253906250e-01, /* 0xbdd20000 */
- -1.6271753311e+01, /* 0xc1822c8d */
- -7.5960174561e+02, /* 0xc43de683 */
- -1.1849806641e+04, /* 0xc639273a */
- -4.8438511719e+04, /* 0xc73d3683 */
-};
-#ifdef __STDC__
-static const float qs8[6] = {
-#else
-static float qs8[6] = {
-#endif
-  1.6139537048e+02, /* 0x43216537 */
-  7.8253862305e+03, /* 0x45f48b17 */
-  1.3387534375e+05, /* 0x4802bcd6 */
-  7.1965775000e+05, /* 0x492fb29c */
-  6.6660125000e+05, /* 0x4922be94 */
- -2.9449025000e+05, /* 0xc88fcb48 */
-};
-
-#ifdef __STDC__
-static const float qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -2.0897993405e-11, /* 0xadb7d219 */
- -1.0253904760e-01, /* 0xbdd1fffe */
- -8.0564479828e+00, /* 0xc100e736 */
- -1.8366960144e+02, /* 0xc337ab6b */
- -1.3731937256e+03, /* 0xc4aba633 */
- -2.6124443359e+03, /* 0xc523471c */
-};
-#ifdef __STDC__
-static const float qs5[6] = {
-#else
-static float qs5[6] = {
-#endif
-  8.1276550293e+01, /* 0x42a28d98 */
-  1.9917987061e+03, /* 0x44f8f98f */
-  1.7468484375e+04, /* 0x468878f8 */
-  4.9851425781e+04, /* 0x4742bb6d */
-  2.7948074219e+04, /* 0x46da5826 */
- -4.7191835938e+03, /* 0xc5937978 */
-};
-
-#ifdef __STDC__
-static const float qr3[6] = {
-#else
-static float qr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -5.0783124372e-09, /* 0xb1ae7d4f */
- -1.0253783315e-01, /* 0xbdd1ff5b */
- -4.6101160049e+00, /* 0xc0938612 */
- -5.7847221375e+01, /* 0xc267638e */
- -2.2824453735e+02, /* 0xc3643e9a */
- -2.1921012878e+02, /* 0xc35b35cb */
-};
-#ifdef __STDC__
-static const float qs3[6] = {
-#else
-static float qs3[6] = {
-#endif
-  4.7665153503e+01, /* 0x423ea91e */
-  6.7386511230e+02, /* 0x4428775e */
-  3.3801528320e+03, /* 0x45534272 */
-  5.5477290039e+03, /* 0x45ad5dd5 */
-  1.9031191406e+03, /* 0x44ede3d0 */
- -1.3520118713e+02, /* 0xc3073381 */
-};
-
-#ifdef __STDC__
-static const float qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -1.7838172539e-07, /* 0xb43f8932 */
- -1.0251704603e-01, /* 0xbdd1f475 */
- -2.7522056103e+00, /* 0xc0302423 */
- -1.9663616180e+01, /* 0xc19d4f16 */
- -4.2325313568e+01, /* 0xc2294d1f */
- -2.1371921539e+01, /* 0xc1aaf9b2 */
-};
-#ifdef __STDC__
-static const float qs2[6] = {
-#else
-static float qs2[6] = {
-#endif
-  2.9533363342e+01, /* 0x41ec4454 */
-  2.5298155212e+02, /* 0x437cfb47 */
-  7.5750280762e+02, /* 0x443d602e */
-  7.3939318848e+02, /* 0x4438d92a */
-  1.5594900513e+02, /* 0x431bf2f2 */
- -4.9594988823e+00, /* 0xc09eb437 */
-};
-
-#ifdef __STDC__
-	static float qonef(float x)
-#else
-	static float qonef(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float  s,r,z;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qr8; q= qs8;}
-	else if(ix>=0x40f71c58){p = qr5; q= qs5;}
-	else if(ix>=0x4036db68){p = qr3; q= qs3;}
-      else {p = qr2; q= qs2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return ((float).375 + r/s)/x;
-}
diff --git a/newlib/libm/math/ef_jn.c b/newlib/libm/math/ef_jn.c
deleted file mode 100644
index bedfb3ed5..000000000
--- a/newlib/libm/math/ef_jn.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* ef_jn.c -- float version of e_jn.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-invsqrtpi=  5.6418961287e-01, /* 0x3f106ebb */
-two   =  2.0000000000e+00, /* 0x40000000 */
-one   =  1.0000000000e+00; /* 0x3F800000 */
-
-#ifdef __STDC__
-static const float zero  =  0.0000000000e+00;
-#else
-static float zero  =  0.0000000000e+00;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_jnf(int n, float x)
-#else
-	float __ieee754_jnf(n,x)
-	int n; float x;
-#endif
-{
-	__int32_t i,hx,ix, sgn;
-	float a, b, temp, di;
-	float z, w;
-
-    /* J(-n,x) = (-1)^n * J(n, x), J(n, -x) = (-1)^n * J(n, x)
-     * Thus, J(-n,x) = J(n,-x)
-     */
-	GET_FLOAT_WORD(hx,x);
-	ix = 0x7fffffff&hx;
-    /* if J(n,NaN) is NaN */
-	if(FLT_UWORD_IS_NAN(ix)) return x+x;
-	if(n<0){		
-		n = -n;
-		x = -x;
-		hx ^= 0x80000000;
-	}
-	if(n==0) return(__ieee754_j0f(x));
-	if(n==1) return(__ieee754_j1f(x));
-	sgn = (n&1)&(hx>>31);	/* even n -- 0, odd n -- sign(x) */
-	x = fabsf(x);
-	if(FLT_UWORD_IS_ZERO(ix)||FLT_UWORD_IS_INFINITE(ix))
-	    b = zero;
-	else if((float)n<=x) {   
-		/* Safe to use J(n+1,x)=2n/x *J(n,x)-J(n-1,x) */
-	    a = __ieee754_j0f(x);
-	    b = __ieee754_j1f(x);
-	    for(i=1;i<n;i++){
-		temp = b;
-		b = b*((float)(i+i)/x) - a; /* avoid underflow */
-		a = temp;
-	    }
-	} else {
-	    if(ix<0x30800000) {	/* x < 2**-29 */
-    /* x is tiny, return the first Taylor expansion of J(n,x) 
-     * J(n,x) = 1/n!*(x/2)^n  - ...
-     */
-		if(n>33)	/* underflow */
-		    b = zero;
-		else {
-		    temp = x*(float)0.5; b = temp;
-		    for (a=one,i=2;i<=n;i++) {
-			a *= (float)i;		/* a = n! */
-			b *= temp;		/* b = (x/2)^n */
-		    }
-		    b = b/a;
-		}
-	    } else {
-		/* use backward recurrence */
-		/* 			x      x^2      x^2       
-		 *  J(n,x)/J(n-1,x) =  ----   ------   ------   .....
-		 *			2n  - 2(n+1) - 2(n+2)
-		 *
-		 * 			1      1        1       
-		 *  (for large x)   =  ----  ------   ------   .....
-		 *			2n   2(n+1)   2(n+2)
-		 *			-- - ------ - ------ - 
-		 *			 x     x         x
-		 *
-		 * Let w = 2n/x and h=2/x, then the above quotient
-		 * is equal to the continued fraction:
-		 *		    1
-		 *	= -----------------------
-		 *		       1
-		 *	   w - -----------------
-		 *			  1
-		 * 	        w+h - ---------
-		 *		       w+2h - ...
-		 *
-		 * To determine how many terms needed, let
-		 * Q(0) = w, Q(1) = w(w+h) - 1,
-		 * Q(k) = (w+k*h)*Q(k-1) - Q(k-2),
-		 * When Q(k) > 1e4	good for single 
-		 * When Q(k) > 1e9	good for double 
-		 * When Q(k) > 1e17	good for quadruple 
-		 */
-	    /* determine k */
-		float t,v;
-		float q0,q1,h,tmp; __int32_t k,m;
-		w  = (n+n)/(float)x; h = (float)2.0/(float)x;
-		q0 = w;  z = w+h; q1 = w*z - (float)1.0; k=1;
-		while(q1<(float)1.0e9) {
-			k += 1; z += h;
-			tmp = z*q1 - q0;
-			q0 = q1;
-			q1 = tmp;
-		}
-		m = n+n;
-		for(t=zero, i = 2*(n+k); i>=m; i -= 2) t = one/(i/x-t);
-		a = t;
-		b = one;
-		/*  estimate log((2/x)^n*n!) = n*log(2/x)+n*ln(n)
-		 *  Hence, if n*(log(2n/x)) > ...
-		 *  single 8.8722839355e+01
-		 *  double 7.09782712893383973096e+02
-		 *  long double 1.1356523406294143949491931077970765006170e+04
-		 *  then recurrent value may overflow and the result is 
-		 *  likely underflow to zero
-		 */
-		tmp = n;
-		v = two/x;
-		tmp = tmp*__ieee754_logf(fabsf(v*tmp));
-		if(tmp<(float)8.8721679688e+01) {
-	    	    for(i=n-1,di=(float)(i+i);i>0;i--){
-		        temp = b;
-			b *= di;
-			b  = b/x - a;
-		        a = temp;
-			di -= two;
-	     	    }
-		} else {
-	    	    for(i=n-1,di=(float)(i+i);i>0;i--){
-		        temp = b;
-			b *= di;
-			b  = b/x - a;
-		        a = temp;
-			di -= two;
-		    /* scale b to avoid spurious overflow */
-			if(b>(float)1e10) {
-			    a /= b;
-			    t /= b;
-			    b  = one;
-			}
-	     	    }
-		}
-	    	b = (t*__ieee754_j0f(x)/b);
-	    }
-	}
-	if(sgn==1) return -b; else return b;
-}
-
-#ifdef __STDC__
-	float __ieee754_ynf(int n, float x) 
-#else
-	float __ieee754_ynf(n,x) 
-	int n; float x;
-#endif
-{
-	__int32_t i,hx,ix,ib;
-	__int32_t sign;
-	float a, b, temp;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = 0x7fffffff&hx;
-    /* if Y(n,NaN) is NaN */
-	if(FLT_UWORD_IS_NAN(ix)) return x+x;
-	if(FLT_UWORD_IS_ZERO(ix)) return -one/zero;
-	if(hx<0) return zero/zero;
-	sign = 1;
-	if(n<0){
-		n = -n;
-		sign = 1 - ((n&1)<<1);
-	}
-	if(n==0) return(__ieee754_y0f(x));
-	if(n==1) return(sign*__ieee754_y1f(x));
-	if(FLT_UWORD_IS_INFINITE(ix)) return zero;
-
-	a = __ieee754_y0f(x);
-	b = __ieee754_y1f(x);
-	/* quit if b is -inf */
-	GET_FLOAT_WORD(ib,b);
-	for(i=1;i<n&&ib!=0xff800000;i++){ 
-	    temp = b;
-	    b = ((float)(i+i)/x)*b - a;
-	    GET_FLOAT_WORD(ib,b);
-	    a = temp;
-	}
-	if(sign>0) return b; else return -b;
-}
diff --git a/newlib/libm/math/ef_log.c b/newlib/libm/math/ef_log.c
deleted file mode 100644
index 619fe9090..000000000
--- a/newlib/libm/math/ef_log.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* ef_log.c -- float version of e_log.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-ln2_hi =   6.9313812256e-01,	/* 0x3f317180 */
-ln2_lo =   9.0580006145e-06,	/* 0x3717f7d1 */
-two25 =    3.355443200e+07,	/* 0x4c000000 */
-Lg1 = 6.6666668653e-01,	/* 3F2AAAAB */
-Lg2 = 4.0000000596e-01,	/* 3ECCCCCD */
-Lg3 = 2.8571429849e-01, /* 3E924925 */
-Lg4 = 2.2222198546e-01, /* 3E638E29 */
-Lg5 = 1.8183572590e-01, /* 3E3A3325 */
-Lg6 = 1.5313838422e-01, /* 3E1CD04F */
-Lg7 = 1.4798198640e-01; /* 3E178897 */
-
-#ifdef __STDC__
-static const float zero   =  0.0;
-#else
-static float zero   =  0.0;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_logf(float x)
-#else
-	float __ieee754_logf(x)
-	float x;
-#endif
-{
-	float hfsq,f,s,z,R,w,t1,t2,dk;
-	__int32_t k,ix,i,j;
-
-	GET_FLOAT_WORD(ix,x);
-
-	k=0;
-	if (FLT_UWORD_IS_ZERO(ix&0x7fffffff))
-	    return -two25/zero;		/* log(+-0)=-inf */
-        if (ix<0) return (x-x)/zero;	/* log(-#) = NaN */
-	if (!FLT_UWORD_IS_FINITE(ix)) return x+x;
-	if (FLT_UWORD_IS_SUBNORMAL(ix)) {
-	    k -= 25; x *= two25; /* subnormal number, scale up x */
-	    GET_FLOAT_WORD(ix,x);
-	} 
-	k += (ix>>23)-127;
-	ix &= 0x007fffff;
-	i = (ix+(0x95f64<<3))&0x800000;
-	SET_FLOAT_WORD(x,ix|(i^0x3f800000));	/* normalize x or x/2 */
-	k += (i>>23);
-	f = x-(float)1.0;
-	if((0x007fffff&(15+ix))<16) {	/* |f| < 2**-20 */
-           if(f==zero) { if(k==0) return zero;  else {dk=(float)k;
-                                return dk*ln2_hi+dk*ln2_lo;}}
-	    R = f*f*((float)0.5-(float)0.33333333333333333*f);
-	    if(k==0) return f-R; else {dk=(float)k;
-	    	     return dk*ln2_hi-((R-dk*ln2_lo)-f);}
-	}
- 	s = f/((float)2.0+f); 
-	dk = (float)k;
-	z = s*s;
-	i = ix-(0x6147a<<3);
-	w = z*z;
-	j = (0x6b851<<3)-ix;
-	t1= w*(Lg2+w*(Lg4+w*Lg6)); 
-	t2= z*(Lg1+w*(Lg3+w*(Lg5+w*Lg7))); 
-	i |= j;
-	R = t2+t1;
-	if(i>0) {
-	    hfsq=(float)0.5*f*f;
-	    if(k==0) return f-(hfsq-s*(hfsq+R)); else
-		     return dk*ln2_hi-((hfsq-(s*(hfsq+R)+dk*ln2_lo))-f);
-	} else {
-	    if(k==0) return f-s*(f-R); else
-		     return dk*ln2_hi-((s*(f-R)-dk*ln2_lo)-f);
-	}
-}
diff --git a/newlib/libm/math/ef_log10.c b/newlib/libm/math/ef_log10.c
deleted file mode 100644
index 5ab23c43f..000000000
--- a/newlib/libm/math/ef_log10.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ef_log10.c -- float version of e_log10.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-two25      =  3.3554432000e+07, /* 0x4c000000 */
-ivln10     =  4.3429449201e-01, /* 0x3ede5bd9 */
-log10_2hi  =  3.0102920532e-01, /* 0x3e9a2080 */
-log10_2lo  =  7.9034151668e-07; /* 0x355427db */
-
-#ifdef __STDC__
-static const float zero   =  0.0;
-#else
-static float zero   =  0.0;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_log10f(float x)
-#else
-	float __ieee754_log10f(x)
-	float x;
-#endif
-{
-	float y,z;
-	__int32_t i,k,hx;
-
-	GET_FLOAT_WORD(hx,x);
-
-        k=0;
-        if (FLT_UWORD_IS_ZERO(hx&0x7fffffff))
-            return -two25/zero;             /* log(+-0)=-inf */
-        if (hx<0) return (x-x)/zero;        /* log(-#) = NaN */
-	if (!FLT_UWORD_IS_FINITE(hx)) return x+x;
-        if (FLT_UWORD_IS_SUBNORMAL(hx)) {
-            k -= 25; x *= two25; /* subnormal number, scale up x */
-	    GET_FLOAT_WORD(hx,x);
-        }
-	k += (hx>>23)-127;
-	i  = ((__uint32_t)k&0x80000000)>>31;
-        hx = (hx&0x007fffff)|((0x7f-i)<<23);
-        y  = (float)(k+i);
-	SET_FLOAT_WORD(x,hx);
-	z  = y*log10_2lo + ivln10*__ieee754_logf(x);
-	return  z+y*log10_2hi;
-}
diff --git a/newlib/libm/math/ef_pow.c b/newlib/libm/math/ef_pow.c
deleted file mode 100644
index 8b1fc18b7..000000000
--- a/newlib/libm/math/ef_pow.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* ef_pow.c -- float version of e_pow.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const 
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-bp[] = {1.0, 1.5,},
-dp_h[] = { 0.0, 5.84960938e-01,}, /* 0x3f15c000 */
-dp_l[] = { 0.0, 1.56322085e-06,}, /* 0x35d1cfdc */
-zero    =  0.0,
-one	=  1.0,
-two	=  2.0,
-two24	=  16777216.0,	/* 0x4b800000 */
-huge	=  1.0e30,
-tiny    =  1.0e-30,
-	/* poly coefs for (3/2)*(log(x)-2s-2/3*s**3 */
-L1  =  6.0000002384e-01, /* 0x3f19999a */
-L2  =  4.2857143283e-01, /* 0x3edb6db7 */
-L3  =  3.3333334327e-01, /* 0x3eaaaaab */
-L4  =  2.7272811532e-01, /* 0x3e8ba305 */
-L5  =  2.3066075146e-01, /* 0x3e6c3255 */
-L6  =  2.0697501302e-01, /* 0x3e53f142 */
-P1   =  1.6666667163e-01, /* 0x3e2aaaab */
-P2   = -2.7777778450e-03, /* 0xbb360b61 */
-P3   =  6.6137559770e-05, /* 0x388ab355 */
-P4   = -1.6533901999e-06, /* 0xb5ddea0e */
-P5   =  4.1381369442e-08, /* 0x3331bb4c */
-lg2  =  6.9314718246e-01, /* 0x3f317218 */
-lg2_h  =  6.93145752e-01, /* 0x3f317200 */
-lg2_l  =  1.42860654e-06, /* 0x35bfbe8c */
-ovt =  4.2995665694e-08, /* -(128-log2(ovfl+.5ulp)) */
-cp    =  9.6179670095e-01, /* 0x3f76384f =2/(3ln2) */
-cp_h  =  9.6179199219e-01, /* 0x3f763800 =head of cp */
-cp_l  =  4.7017383622e-06, /* 0x369dc3a0 =tail of cp_h */
-ivln2    =  1.4426950216e+00, /* 0x3fb8aa3b =1/ln2 */
-ivln2_h  =  1.4426879883e+00, /* 0x3fb8aa00 =16b 1/ln2*/
-ivln2_l  =  7.0526075433e-06; /* 0x36eca570 =1/ln2 tail*/
-
-#ifdef __STDC__
-	float __ieee754_powf(float x, float y)
-#else
-	float __ieee754_powf(x,y)
-	float x, y;
-#endif
-{
-	float z,ax,z_h,z_l,p_h,p_l;
-	float y1,t1,t2,r,s,t,u,v,w;
-	__int32_t i,j,k,yisint,n;
-	__int32_t hx,hy,ix,iy,is;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hy,y);
-	ix = hx&0x7fffffff;  iy = hy&0x7fffffff;
-
-    /* y==zero: x**0 = 1 */
-	if(FLT_UWORD_IS_ZERO(iy)) return one; 	
-
-    /* +-NaN return x+y */
-	if(FLT_UWORD_IS_NAN(ix) ||
-	   FLT_UWORD_IS_NAN(iy))
-		return x+y;	
-
-    /* determine if y is an odd int when x < 0
-     * yisint = 0	... y is not an integer
-     * yisint = 1	... y is an odd int
-     * yisint = 2	... y is an even int
-     */
-	yisint  = 0;
-	if(hx<0) {	
-	    if(iy>=0x4b800000) yisint = 2; /* even integer y */
-	    else if(iy>=0x3f800000) {
-		k = (iy>>23)-0x7f;	   /* exponent */
-		j = iy>>(23-k);
-		if((j<<(23-k))==iy) yisint = 2-(j&1);
-	    }		
-	} 
-
-    /* special value of y */
-	if (FLT_UWORD_IS_INFINITE(iy)) {	/* y is +-inf */
-	    if (ix==0x3f800000)
-	        return  y - y;	/* inf**+-1 is NaN */
-	    else if (ix > 0x3f800000)/* (|x|>1)**+-inf = inf,0 */
-	        return (hy>=0)? y: zero;
-	    else			/* (|x|<1)**-,+inf = inf,0 */
-	        return (hy<0)?-y: zero;
-	} 
-	if(iy==0x3f800000) {	/* y is  +-1 */
-	    if(hy<0) return one/x; else return x;
-	}
-	if(hy==0x40000000) return x*x; /* y is  2 */
-	if(hy==0x3f000000) {	/* y is  0.5 */
-	    if(hx>=0)	/* x >= +0 */
-	    return __ieee754_sqrtf(x);	
-	}
-
-	ax   = fabsf(x);
-    /* special value of x */
-	if(FLT_UWORD_IS_INFINITE(ix)||FLT_UWORD_IS_ZERO(ix)||ix==0x3f800000){
-	    z = ax;			/*x is +-0,+-inf,+-1*/
-	    if(hy<0) z = one/z;	/* z = (1/|x|) */
-	    if(hx<0) {
-		if(((ix-0x3f800000)|yisint)==0) {
-		    z = (z-z)/(z-z); /* (-1)**non-int is NaN */
-		} else if(yisint==1) 
-		    z = -z;		/* (x<0)**odd = -(|x|**odd) */
-	    }
-	    return z;
-	}
-    
-    /* (x<0)**(non-int) is NaN */
-	if(((((__uint32_t)hx>>31)-1)|yisint)==0) return (x-x)/(x-x);
-
-    /* |y| is huge */
-	if(iy>0x4d000000) { /* if |y| > 2**27 */
-	/* over/underflow if x is not close to one */
-	    if(ix<0x3f7ffff8) return (hy<0)? huge*huge:tiny*tiny;
-	    if(ix>0x3f800007) return (hy>0)? huge*huge:tiny*tiny;
-	/* now |1-x| is tiny <= 2**-20, suffice to compute 
-	   log(x) by x-x^2/2+x^3/3-x^4/4 */
-	    t = ax-1;		/* t has 20 trailing zeros */
-	    w = (t*t)*((float)0.5-t*((float)0.333333333333-t*(float)0.25));
-	    u = ivln2_h*t;	/* ivln2_h has 16 sig. bits */
-	    v = t*ivln2_l-w*ivln2;
-	    t1 = u+v;
-	    GET_FLOAT_WORD(is,t1);
-	    SET_FLOAT_WORD(t1,is&0xfffff000);
-	    t2 = v-(t1-u);
-	} else {
-	    float s2,s_h,s_l,t_h,t_l;
-	    n = 0;
-	/* take care subnormal number */
-	    if(FLT_UWORD_IS_SUBNORMAL(ix))
-		{ax *= two24; n -= 24; GET_FLOAT_WORD(ix,ax); }
-	    n  += ((ix)>>23)-0x7f;
-	    j  = ix&0x007fffff;
-	/* determine interval */
-	    ix = j|0x3f800000;		/* normalize ix */
-	    if(j<=0x1cc471) k=0;	/* |x|<sqrt(3/2) */
-	    else if(j<0x5db3d7) k=1;	/* |x|<sqrt(3)   */
-	    else {k=0;n+=1;ix -= 0x00800000;}
-	    SET_FLOAT_WORD(ax,ix);
-
-	/* compute s = s_h+s_l = (x-1)/(x+1) or (x-1.5)/(x+1.5) */
-	    u = ax-bp[k];		/* bp[0]=1.0, bp[1]=1.5 */
-	    v = one/(ax+bp[k]);
-	    s = u*v;
-	    s_h = s;
-	    GET_FLOAT_WORD(is,s_h);
-	    SET_FLOAT_WORD(s_h,is&0xfffff000);
-	/* t_h=ax+bp[k] High */
-	    SET_FLOAT_WORD(t_h,((ix>>1)|0x20000000)+0x0040000+(k<<21));
-	    t_l = ax - (t_h-bp[k]);
-	    s_l = v*((u-s_h*t_h)-s_h*t_l);
-	/* compute log(ax) */
-	    s2 = s*s;
-	    r = s2*s2*(L1+s2*(L2+s2*(L3+s2*(L4+s2*(L5+s2*L6)))));
-	    r += s_l*(s_h+s);
-	    s2  = s_h*s_h;
-	    t_h = (float)3.0+s2+r;
-	    GET_FLOAT_WORD(is,t_h);
-	    SET_FLOAT_WORD(t_h,is&0xfffff000);
-	    t_l = r-((t_h-(float)3.0)-s2);
-	/* u+v = s*(1+...) */
-	    u = s_h*t_h;
-	    v = s_l*t_h+t_l*s;
-	/* 2/(3log2)*(s+...) */
-	    p_h = u+v;
-	    GET_FLOAT_WORD(is,p_h);
-	    SET_FLOAT_WORD(p_h,is&0xfffff000);
-	    p_l = v-(p_h-u);
-	    z_h = cp_h*p_h;		/* cp_h+cp_l = 2/(3*log2) */
-	    z_l = cp_l*p_h+p_l*cp+dp_l[k];
-	/* log2(ax) = (s+..)*2/(3*log2) = n + dp_h + z_h + z_l */
-	    t = (float)n;
-	    t1 = (((z_h+z_l)+dp_h[k])+t);
-	    GET_FLOAT_WORD(is,t1);
-	    SET_FLOAT_WORD(t1,is&0xfffff000);
-	    t2 = z_l-(((t1-t)-dp_h[k])-z_h);
-	}
-
-	s = one; /* s (sign of result -ve**odd) = -1 else = 1 */
-	if(((((__uint32_t)hx>>31)-1)|(yisint-1))==0)
-	    s = -one;	/* (-ve)**(odd int) */
-
-    /* split up y into y1+y2 and compute (y1+y2)*(t1+t2) */
-	GET_FLOAT_WORD(is,y);
-	SET_FLOAT_WORD(y1,is&0xfffff000);
-	p_l = (y-y1)*t1+y*t2;
-	p_h = y1*t1;
-	z = p_l+p_h;
-	GET_FLOAT_WORD(j,z);
-	i = j&0x7fffffff;
-	if (j>0) {
-	    if (i>FLT_UWORD_EXP_MAX)
-	        return s*huge*huge;			/* overflow */
-	    else if (i==FLT_UWORD_EXP_MAX)
-	        if(p_l+ovt>z-p_h) return s*huge*huge;	/* overflow */
-        } else {
-	    if (i>FLT_UWORD_EXP_MIN)
-	        return s*tiny*tiny;			/* underflow */
-	    else if (i==FLT_UWORD_EXP_MIN)
-	        if(p_l<=z-p_h) return s*tiny*tiny;	/* underflow */
-	}
-    /*
-     * compute 2**(p_h+p_l)
-     */
-	k = (i>>23)-0x7f;
-	n = 0;
-	if(i>0x3f000000) {		/* if |z| > 0.5, set n = [z+0.5] */
-	    n = j+(0x00800000>>(k+1));
-	    k = ((n&0x7fffffff)>>23)-0x7f;	/* new k for n */
-	    SET_FLOAT_WORD(t,n&~(0x007fffff>>k));
-	    n = ((n&0x007fffff)|0x00800000)>>(23-k);
-	    if(j<0) n = -n;
-	    p_h -= t;
-	} 
-	t = p_l+p_h;
-	GET_FLOAT_WORD(is,t);
-	SET_FLOAT_WORD(t,is&0xfffff000);
-	u = t*lg2_h;
-	v = (p_l-(t-p_h))*lg2+t*lg2_l;
-	z = u+v;
-	w = v-(z-u);
-	t  = z*z;
-	t1  = z - t*(P1+t*(P2+t*(P3+t*(P4+t*P5))));
-	r  = (z*t1)/(t1-two)-(w+z*w);
-	z  = one-(r-z);
-	GET_FLOAT_WORD(j,z);
-	j += (n<<23);
-	if((j>>23)<=0) z = scalbnf(z,(int)n);	/* subnormal output */
-	else SET_FLOAT_WORD(z,j);
-	return s*z;
-}
diff --git a/newlib/libm/math/ef_rem_pio2.c b/newlib/libm/math/ef_rem_pio2.c
deleted file mode 100644
index f1191d09f..000000000
--- a/newlib/libm/math/ef_rem_pio2.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* ef_rem_pio2.c -- float version of e_rem_pio2.c
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_rem_pio2f(x,y)
- * 
- * return the remainder of x rem pi/2 in y[0]+y[1] 
- * use __kernel_rem_pio2f()
- */
-
-#include "fdlibm.h"
-
-/*
- * Table of constants for 2/pi, 396 Hex digits (476 decimal) of 2/pi 
- */
-#ifdef __STDC__
-static const __int32_t two_over_pi[] = {
-#else
-static __int32_t two_over_pi[] = {
-#endif
-0xA2, 0xF9, 0x83, 0x6E, 0x4E, 0x44, 0x15, 0x29, 0xFC,
-0x27, 0x57, 0xD1, 0xF5, 0x34, 0xDD, 0xC0, 0xDB, 0x62, 
-0x95, 0x99, 0x3C, 0x43, 0x90, 0x41, 0xFE, 0x51, 0x63,
-0xAB, 0xDE, 0xBB, 0xC5, 0x61, 0xB7, 0x24, 0x6E, 0x3A, 
-0x42, 0x4D, 0xD2, 0xE0, 0x06, 0x49, 0x2E, 0xEA, 0x09,
-0xD1, 0x92, 0x1C, 0xFE, 0x1D, 0xEB, 0x1C, 0xB1, 0x29, 
-0xA7, 0x3E, 0xE8, 0x82, 0x35, 0xF5, 0x2E, 0xBB, 0x44,
-0x84, 0xE9, 0x9C, 0x70, 0x26, 0xB4, 0x5F, 0x7E, 0x41, 
-0x39, 0x91, 0xD6, 0x39, 0x83, 0x53, 0x39, 0xF4, 0x9C,
-0x84, 0x5F, 0x8B, 0xBD, 0xF9, 0x28, 0x3B, 0x1F, 0xF8, 
-0x97, 0xFF, 0xDE, 0x05, 0x98, 0x0F, 0xEF, 0x2F, 0x11,
-0x8B, 0x5A, 0x0A, 0x6D, 0x1F, 0x6D, 0x36, 0x7E, 0xCF, 
-0x27, 0xCB, 0x09, 0xB7, 0x4F, 0x46, 0x3F, 0x66, 0x9E,
-0x5F, 0xEA, 0x2D, 0x75, 0x27, 0xBA, 0xC7, 0xEB, 0xE5, 
-0xF1, 0x7B, 0x3D, 0x07, 0x39, 0xF7, 0x8A, 0x52, 0x92,
-0xEA, 0x6B, 0xFB, 0x5F, 0xB1, 0x1F, 0x8D, 0x5D, 0x08, 
-0x56, 0x03, 0x30, 0x46, 0xFC, 0x7B, 0x6B, 0xAB, 0xF0,
-0xCF, 0xBC, 0x20, 0x9A, 0xF4, 0x36, 0x1D, 0xA9, 0xE3, 
-0x91, 0x61, 0x5E, 0xE6, 0x1B, 0x08, 0x65, 0x99, 0x85,
-0x5F, 0x14, 0xA0, 0x68, 0x40, 0x8D, 0xFF, 0xD8, 0x80, 
-0x4D, 0x73, 0x27, 0x31, 0x06, 0x06, 0x15, 0x56, 0xCA,
-0x73, 0xA8, 0xC9, 0x60, 0xE2, 0x7B, 0xC0, 0x8C, 0x6B, 
-};
-
-/* This array is like the one in e_rem_pio2.c, but the numbers are
-   single precision and the last 8 bits are forced to 0.  */
-#ifdef __STDC__
-static const __int32_t npio2_hw[] = {
-#else
-static __int32_t npio2_hw[] = {
-#endif
-0x3fc90f00, 0x40490f00, 0x4096cb00, 0x40c90f00, 0x40fb5300, 0x4116cb00,
-0x412fed00, 0x41490f00, 0x41623100, 0x417b5300, 0x418a3a00, 0x4196cb00,
-0x41a35c00, 0x41afed00, 0x41bc7e00, 0x41c90f00, 0x41d5a000, 0x41e23100,
-0x41eec200, 0x41fb5300, 0x4203f200, 0x420a3a00, 0x42108300, 0x4216cb00,
-0x421d1400, 0x42235c00, 0x4229a500, 0x422fed00, 0x42363600, 0x423c7e00,
-0x4242c700, 0x42490f00
-};
-
-/*
- * invpio2:  24 bits of 2/pi
- * pio2_1:   first  17 bit of pi/2
- * pio2_1t:  pi/2 - pio2_1
- * pio2_2:   second 17 bit of pi/2
- * pio2_2t:  pi/2 - (pio2_1+pio2_2)
- * pio2_3:   third  17 bit of pi/2
- * pio2_3t:  pi/2 - (pio2_1+pio2_2+pio2_3)
- */
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-zero =  0.0000000000e+00, /* 0x00000000 */
-half =  5.0000000000e-01, /* 0x3f000000 */
-two8 =  2.5600000000e+02, /* 0x43800000 */
-invpio2 =  6.3661980629e-01, /* 0x3f22f984 */
-pio2_1  =  1.5707855225e+00, /* 0x3fc90f80 */
-pio2_1t =  1.0804334124e-05, /* 0x37354443 */
-pio2_2  =  1.0804273188e-05, /* 0x37354400 */
-pio2_2t =  6.0770999344e-11, /* 0x2e85a308 */
-pio2_3  =  6.0770943833e-11, /* 0x2e85a300 */
-pio2_3t =  6.1232342629e-17; /* 0x248d3132 */
-
-#ifdef __STDC__
-	__int32_t __ieee754_rem_pio2f(float x, float *y)
-#else
-	__int32_t __ieee754_rem_pio2f(x,y)
-	float x,y[];
-#endif
-{
-	float z,w,t,r,fn;
-	float tx[3];
-	__int32_t i,j,n,ix,hx;
-	int e0,nx;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix<=0x3f490fd8)   /* |x| ~<= pi/4 , no need for reduction */
-	    {y[0] = x; y[1] = 0; return 0;}
-	if(ix<0x4016cbe4) {  /* |x| < 3pi/4, special case with n=+-1 */
-	    if(hx>0) { 
-		z = x - pio2_1;
-		if((ix&0xfffffff0)!=0x3fc90fd0) { /* 24+24 bit pi OK */
-		    y[0] = z - pio2_1t;
-		    y[1] = (z-y[0])-pio2_1t;
-		} else {		/* near pi/2, use 24+24+24 bit pi */
-		    z -= pio2_2;
-		    y[0] = z - pio2_2t;
-		    y[1] = (z-y[0])-pio2_2t;
-		}
-		return 1;
-	    } else {	/* negative x */
-		z = x + pio2_1;
-		if((ix&0xfffffff0)!=0x3fc90fd0) { /* 24+24 bit pi OK */
-		    y[0] = z + pio2_1t;
-		    y[1] = (z-y[0])+pio2_1t;
-		} else {		/* near pi/2, use 24+24+24 bit pi */
-		    z += pio2_2;
-		    y[0] = z + pio2_2t;
-		    y[1] = (z-y[0])+pio2_2t;
-		}
-		return -1;
-	    }
-	}
-	if(ix<=0x43490f80) { /* |x| ~<= 2^7*(pi/2), medium size */
-	    t  = fabsf(x);
-	    n  = (__int32_t) (t*invpio2+half);
-	    fn = (float)n;
-	    r  = t-fn*pio2_1;
-	    w  = fn*pio2_1t;	/* 1st round good to 40 bit */
-	    if(n<32&&(ix&0xffffff00)!=npio2_hw[n-1]) {	
-		y[0] = r-w;	/* quick check no cancellation */
-	    } else {
-	        __uint32_t high;
-	        j  = ix>>23;
-	        y[0] = r-w; 
-		GET_FLOAT_WORD(high,y[0]);
-	        i = j-((high>>23)&0xff);
-	        if(i>8) {  /* 2nd iteration needed, good to 57 */
-		    t  = r;
-		    w  = fn*pio2_2;	
-		    r  = t-w;
-		    w  = fn*pio2_2t-((t-r)-w);	
-		    y[0] = r-w;
-		    GET_FLOAT_WORD(high,y[0]);
-		    i = j-((high>>23)&0xff);
-		    if(i>25)  {	/* 3rd iteration need, 74 bits acc */
-		    	t  = r;	/* will cover all possible cases */
-		    	w  = fn*pio2_3;	
-		    	r  = t-w;
-		    	w  = fn*pio2_3t-((t-r)-w);	
-		    	y[0] = r-w;
-		    }
-		}
-	    }
-	    y[1] = (r-y[0])-w;
-	    if(hx<0) 	{y[0] = -y[0]; y[1] = -y[1]; return -n;}
-	    else	 return n;
-	}
-    /* 
-     * all other (large) arguments
-     */
-	if(!FLT_UWORD_IS_FINITE(ix)) {
-	    y[0]=y[1]=x-x; return 0;
-	}
-    /* set z = scalbn(|x|,ilogb(x)-7) */
-	e0 	= (int)((ix>>23)-134);	/* e0 = ilogb(z)-7; */
-	SET_FLOAT_WORD(z, ix - ((__int32_t)e0<<23));
-	for(i=0;i<2;i++) {
-		tx[i] = (float)((__int32_t)(z));
-		z     = (z-tx[i])*two8;
-	}
-	tx[2] = z;
-	nx = 3;
-	while(tx[nx-1]==zero) nx--;	/* skip zero term */
-	n  =  __kernel_rem_pio2f(tx,y,e0,nx,2,two_over_pi);
-	if(hx<0) {y[0] = -y[0]; y[1] = -y[1]; return -n;}
-	return n;
-}
diff --git a/newlib/libm/math/ef_remainder.c b/newlib/libm/math/ef_remainder.c
deleted file mode 100644
index 23d29d05a..000000000
--- a/newlib/libm/math/ef_remainder.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* ef_remainder.c -- float version of e_remainder.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-
-#ifdef __STDC__
-	float __ieee754_remainderf(float x, float p)
-#else
-	float __ieee754_remainderf(x,p)
-	float x,p;
-#endif
-{
-	__int32_t hx,hp;
-	__uint32_t sx;
-	float p_half;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hp,p);
-	sx = hx&0x80000000;
-	hp &= 0x7fffffff;
-	hx &= 0x7fffffff;
-
-    /* purge off exception values */
-	if(FLT_UWORD_IS_ZERO(hp)||
-	   !FLT_UWORD_IS_FINITE(hx)||
-	   FLT_UWORD_IS_NAN(hp))
-	    return (x*p)/(x*p);
-
-
-	if (hp<=FLT_UWORD_HALF_MAX) x = __ieee754_fmodf(x,p+p); /* now x < 2p */
-	if ((hx-hp)==0) return zero*x;
-	x  = fabsf(x);
-	p  = fabsf(p);
-	if (hp<0x01000000) {
-	    if(x+x>p) {
-		x-=p;
-		if(x+x>=p) x -= p;
-	    }
-	} else {
-	    p_half = (float)0.5*p;
-	    if(x>p_half) {
-		x-=p;
-		if(x>=p_half) x -= p;
-	    }
-	}
-	GET_FLOAT_WORD(hx,x);
-	SET_FLOAT_WORD(x,hx^sx);
-	return x;
-}
diff --git a/newlib/libm/math/ef_scalb.c b/newlib/libm/math/ef_scalb.c
deleted file mode 100644
index 3677a3b1f..000000000
--- a/newlib/libm/math/ef_scalb.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* ef_scalb.c -- float version of e_scalb.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <limits.h>
-
-#ifdef _SCALB_INT
-#ifdef __STDC__
-	float __ieee754_scalbf(float x, int fn)
-#else
-	float __ieee754_scalbf(x,fn)
-	float x; int fn;
-#endif
-#else
-#ifdef __STDC__
-	float __ieee754_scalbf(float x, float fn)
-#else
-	float __ieee754_scalbf(x,fn)
-	float x, fn;
-#endif
-#endif
-{
-#ifdef _SCALB_INT
-	return scalbnf(x,fn);
-#else
-	if (isnanf(x)||isnanf(fn)) return x*fn;
-	if (!finitef(fn)) {
-	    if(fn>(float)0.0) return x*fn;
-	    else       return x/(-fn);
-	}
-	if (rintf(fn)!=fn) return (fn-fn)/(fn-fn);
-#if INT_MAX > 65000
-	if ( fn > (float)65000.0) return scalbnf(x, 65000);
-	if (-fn > (float)65000.0) return scalbnf(x,-65000);
-#else
-	if ( fn > (float)32000.0) return scalbnf(x, 32000);
-	if (-fn > (float)32000.0) return scalbnf(x,-32000);
-#endif
-	return scalbnf(x,(int)fn);
-#endif
-}
diff --git a/newlib/libm/math/ef_sinh.c b/newlib/libm/math/ef_sinh.c
deleted file mode 100644
index a61b17294..000000000
--- a/newlib/libm/math/ef_sinh.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ef_sinh.c -- float version of e_sinh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one = 1.0, shuge = 1.0e37;
-#else
-static float one = 1.0, shuge = 1.0e37;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_sinhf(float x)
-#else
-	float __ieee754_sinhf(x)
-	float x;
-#endif
-{	
-	float t,w,h;
-	__int32_t ix,jx;
-
-	GET_FLOAT_WORD(jx,x);
-	ix = jx&0x7fffffff;
-
-    /* x is INF or NaN */
-	if(!FLT_UWORD_IS_FINITE(ix)) return x+x;	
-
-	h = 0.5;
-	if (jx<0) h = -h;
-    /* |x| in [0,22], return sign(x)*0.5*(E+E/(E+1))) */
-	if (ix < 0x41b00000) {		/* |x|<22 */
-	    if (ix<0x31800000) 		/* |x|<2**-28 */
-		if(shuge+x>one) return x;/* sinh(tiny) = tiny with inexact */
-	    t = expm1f(fabsf(x));
-	    if(ix<0x3f800000) return h*((float)2.0*t-t*t/(t+one));
-	    return h*(t+t/(t+one));
-	}
-
-    /* |x| in [22, log(maxdouble)] return 0.5*exp(|x|) */
-	if (ix<=FLT_UWORD_LOG_MAX)  return h*__ieee754_expf(fabsf(x));
-
-    /* |x| in [log(maxdouble), overflowthresold] */
-	if (ix<=FLT_UWORD_LOG_2MAX) {
-	    w = __ieee754_expf((float)0.5*fabsf(x));
-	    t = h*w;
-	    return t*w;
-	}
-
-    /* |x| > overflowthresold, sinh(x) overflow */
-	return x*shuge;
-}
diff --git a/newlib/libm/math/ef_sqrt.c b/newlib/libm/math/ef_sqrt.c
deleted file mode 100644
index 17dab9311..000000000
--- a/newlib/libm/math/ef_sqrt.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* ef_sqrtf.c -- float version of e_sqrt.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static	const float	one	= 1.0, tiny=1.0e-30;
-#else
-static	float	one	= 1.0, tiny=1.0e-30;
-#endif
-
-#ifdef __STDC__
-	float __ieee754_sqrtf(float x)
-#else
-	float __ieee754_sqrtf(x)
-	float x;
-#endif
-{
-	float z;
-	__int32_t 	sign = (__int32_t)0x80000000; 
-	__uint32_t r,hx;
-	__int32_t ix,s,q,m,t,i;
-
-	GET_FLOAT_WORD(ix,x);
-	hx = ix&0x7fffffff;
-
-    /* take care of Inf and NaN */
-	if(!FLT_UWORD_IS_FINITE(hx))
-	    return x*x+x;		/* sqrt(NaN)=NaN, sqrt(+inf)=+inf
-					   sqrt(-inf)=sNaN */
-    /* take care of zero and -ves */
-	if(FLT_UWORD_IS_ZERO(hx)) return x;/* sqrt(+-0) = +-0 */
-	if(ix<0) return (x-x)/(x-x);		/* sqrt(-ve) = sNaN */
-
-    /* normalize x */
-	m = (ix>>23);
-	if(FLT_UWORD_IS_SUBNORMAL(hx)) {		/* subnormal x */
-	    for(i=0;(ix&0x00800000L)==0;i++) ix<<=1;
-	    m -= i-1;
-	}
-	m -= 127;	/* unbias exponent */
-	ix = (ix&0x007fffffL)|0x00800000L;
-	if(m&1)	/* odd m, double x to make it even */
-	    ix += ix;
-	m >>= 1;	/* m = [m/2] */
-
-    /* generate sqrt(x) bit by bit */
-	ix += ix;
-	q = s = 0;		/* q = sqrt(x) */
-	r = 0x01000000L;		/* r = moving bit from right to left */
-
-	while(r!=0) {
-	    t = s+r; 
-	    if(t<=ix) { 
-		s    = t+r; 
-		ix  -= t; 
-		q   += r; 
-	    } 
-	    ix += ix;
-	    r>>=1;
-	}
-
-    /* use floating add to find out rounding direction */
-	if(ix!=0) {
-	    z = one-tiny; /* trigger inexact flag */
-	    if (z>=one) {
-	        z = one+tiny;
-		if (z>one)
-		    q += 2;
-		else
-		    q += (q&1);
-	    }
-	}
-	ix = (q>>1)+0x3f000000L;
-	ix += (m <<23);
-	SET_FLOAT_WORD(z,ix);
-	return z;
-}
diff --git a/newlib/libm/math/er_gamma.c b/newlib/libm/math/er_gamma.c
deleted file mode 100644
index 3c0e241e5..000000000
--- a/newlib/libm/math/er_gamma.c
+++ /dev/null
@@ -1,32 +0,0 @@
-
-/* @(#)er_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_gamma_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method: See __ieee754_lgamma_r
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	double __ieee754_gamma_r(double x, int *signgamp)
-#else
-	double __ieee754_gamma_r(x,signgamp)
-	double x; int *signgamp;
-#endif
-{
-	return __ieee754_exp (__ieee754_lgamma_r(x,signgamp));
-}
diff --git a/newlib/libm/math/er_lgamma.c b/newlib/libm/math/er_lgamma.c
deleted file mode 100644
index 7c9a153ed..000000000
--- a/newlib/libm/math/er_lgamma.c
+++ /dev/null
@@ -1,309 +0,0 @@
-
-/* @(#)er_lgamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_lgamma_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method:
- *   1. Argument Reduction for 0 < x <= 8
- * 	Since gamma(1+s)=s*gamma(s), for x in [0,8], we may 
- * 	reduce x to a number in [1.5,2.5] by
- * 		lgamma(1+s) = log(s) + lgamma(s)
- *	for example,
- *		lgamma(7.3) = log(6.3) + lgamma(6.3)
- *			    = log(6.3*5.3) + lgamma(5.3)
- *			    = log(6.3*5.3*4.3*3.3*2.3) + lgamma(2.3)
- *   2. Polynomial approximation of lgamma around its
- *	minimun ymin=1.461632144968362245 to maintain monotonicity.
- *	On [ymin-0.23, ymin+0.27] (i.e., [1.23164,1.73163]), use
- *		Let z = x-ymin;
- *		lgamma(x) = -1.214862905358496078218 + z^2*poly(z)
- *	where
- *		poly(z) is a 14 degree polynomial.
- *   2. Rational approximation in the primary interval [2,3]
- *	We use the following approximation:
- *		s = x-2.0;
- *		lgamma(x) = 0.5*s + s*P(s)/Q(s)
- *	with accuracy
- *		|P/Q - (lgamma(x)-0.5s)| < 2**-61.71
- *	Our algorithms are based on the following observation
- *
- *                             zeta(2)-1    2    zeta(3)-1    3
- * lgamma(2+s) = s*(1-Euler) + --------- * s  -  --------- * s  + ...
- *                                 2                 3
- *
- *	where Euler = 0.5771... is the Euler constant, which is very
- *	close to 0.5.
- *
- *   3. For x>=8, we have
- *	lgamma(x)~(x-0.5)log(x)-x+0.5*log(2pi)+1/(12x)-1/(360x**3)+....
- *	(better formula:
- *	   lgamma(x)~(x-0.5)*(log(x)-1)-.5*(log(2pi)-1) + ...)
- *	Let z = 1/x, then we approximation
- *		f(z) = lgamma(x) - (x-0.5)(log(x)-1)
- *	by
- *	  			    3       5             11
- *		w = w0 + w1*z + w2*z  + w3*z  + ... + w6*z
- *	where 
- *		|w - f(z)| < 2**-58.74
- *		
- *   4. For negative x, since (G is gamma function)
- *		-x*G(-x)*G(x) = pi/sin(pi*x),
- * 	we have
- * 		G(x) = pi/(sin(pi*x)*(-x)*G(-x))
- *	since G(-x) is positive, sign(G(x)) = sign(sin(pi*x)) for x<0
- *	Hence, for x<0, signgam = sign(sin(pi*x)) and 
- *		lgamma(x) = log(|Gamma(x)|)
- *			  = log(pi/(|x*sin(pi*x)|)) - lgamma(-x);
- *	Note: one should avoid compute pi*(-x) directly in the 
- *	      computation of sin(pi*(-x)).
- *		
- *   5. Special Cases
- *		lgamma(2+s) ~ s*(1-Euler) for tiny s
- *		lgamma(1)=lgamma(2)=0
- *		lgamma(x) ~ -log(x) for tiny x
- *		lgamma(0) = lgamma(inf) = inf
- *	 	lgamma(-integer) = +-inf
- *	
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-two52=  4.50359962737049600000e+15, /* 0x43300000, 0x00000000 */
-half=  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-pi  =  3.14159265358979311600e+00, /* 0x400921FB, 0x54442D18 */
-a0  =  7.72156649015328655494e-02, /* 0x3FB3C467, 0xE37DB0C8 */
-a1  =  3.22467033424113591611e-01, /* 0x3FD4A34C, 0xC4A60FAD */
-a2  =  6.73523010531292681824e-02, /* 0x3FB13E00, 0x1A5562A7 */
-a3  =  2.05808084325167332806e-02, /* 0x3F951322, 0xAC92547B */
-a4  =  7.38555086081402883957e-03, /* 0x3F7E404F, 0xB68FEFE8 */
-a5  =  2.89051383673415629091e-03, /* 0x3F67ADD8, 0xCCB7926B */
-a6  =  1.19270763183362067845e-03, /* 0x3F538A94, 0x116F3F5D */
-a7  =  5.10069792153511336608e-04, /* 0x3F40B6C6, 0x89B99C00 */
-a8  =  2.20862790713908385557e-04, /* 0x3F2CF2EC, 0xED10E54D */
-a9  =  1.08011567247583939954e-04, /* 0x3F1C5088, 0x987DFB07 */
-a10 =  2.52144565451257326939e-05, /* 0x3EFA7074, 0x428CFA52 */
-a11 =  4.48640949618915160150e-05, /* 0x3F07858E, 0x90A45837 */
-tc  =  1.46163214496836224576e+00, /* 0x3FF762D8, 0x6356BE3F */
-tf  = -1.21486290535849611461e-01, /* 0xBFBF19B9, 0xBCC38A42 */
-/* tt = -(tail of tf) */
-tt  = -3.63867699703950536541e-18, /* 0xBC50C7CA, 0xA48A971F */
-t0  =  4.83836122723810047042e-01, /* 0x3FDEF72B, 0xC8EE38A2 */
-t1  = -1.47587722994593911752e-01, /* 0xBFC2E427, 0x8DC6C509 */
-t2  =  6.46249402391333854778e-02, /* 0x3FB08B42, 0x94D5419B */
-t3  = -3.27885410759859649565e-02, /* 0xBFA0C9A8, 0xDF35B713 */
-t4  =  1.79706750811820387126e-02, /* 0x3F9266E7, 0x970AF9EC */
-t5  = -1.03142241298341437450e-02, /* 0xBF851F9F, 0xBA91EC6A */
-t6  =  6.10053870246291332635e-03, /* 0x3F78FCE0, 0xE370E344 */
-t7  = -3.68452016781138256760e-03, /* 0xBF6E2EFF, 0xB3E914D7 */
-t8  =  2.25964780900612472250e-03, /* 0x3F6282D3, 0x2E15C915 */
-t9  = -1.40346469989232843813e-03, /* 0xBF56FE8E, 0xBF2D1AF1 */
-t10 =  8.81081882437654011382e-04, /* 0x3F4CDF0C, 0xEF61A8E9 */
-t11 = -5.38595305356740546715e-04, /* 0xBF41A610, 0x9C73E0EC */
-t12 =  3.15632070903625950361e-04, /* 0x3F34AF6D, 0x6C0EBBF7 */
-t13 = -3.12754168375120860518e-04, /* 0xBF347F24, 0xECC38C38 */
-t14 =  3.35529192635519073543e-04, /* 0x3F35FD3E, 0xE8C2D3F4 */
-u0  = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
-u1  =  6.32827064025093366517e-01, /* 0x3FE4401E, 0x8B005DFF */
-u2  =  1.45492250137234768737e+00, /* 0x3FF7475C, 0xD119BD6F */
-u3  =  9.77717527963372745603e-01, /* 0x3FEF4976, 0x44EA8450 */
-u4  =  2.28963728064692451092e-01, /* 0x3FCD4EAE, 0xF6010924 */
-u5  =  1.33810918536787660377e-02, /* 0x3F8B678B, 0xBF2BAB09 */
-v1  =  2.45597793713041134822e+00, /* 0x4003A5D7, 0xC2BD619C */
-v2  =  2.12848976379893395361e+00, /* 0x40010725, 0xA42B18F5 */
-v3  =  7.69285150456672783825e-01, /* 0x3FE89DFB, 0xE45050AF */
-v4  =  1.04222645593369134254e-01, /* 0x3FBAAE55, 0xD6537C88 */
-v5  =  3.21709242282423911810e-03, /* 0x3F6A5ABB, 0x57D0CF61 */
-s0  = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
-s1  =  2.14982415960608852501e-01, /* 0x3FCB848B, 0x36E20878 */
-s2  =  3.25778796408930981787e-01, /* 0x3FD4D98F, 0x4F139F59 */
-s3  =  1.46350472652464452805e-01, /* 0x3FC2BB9C, 0xBEE5F2F7 */
-s4  =  2.66422703033638609560e-02, /* 0x3F9B481C, 0x7E939961 */
-s5  =  1.84028451407337715652e-03, /* 0x3F5E26B6, 0x7368F239 */
-s6  =  3.19475326584100867617e-05, /* 0x3F00BFEC, 0xDD17E945 */
-r1  =  1.39200533467621045958e+00, /* 0x3FF645A7, 0x62C4AB74 */
-r2  =  7.21935547567138069525e-01, /* 0x3FE71A18, 0x93D3DCDC */
-r3  =  1.71933865632803078993e-01, /* 0x3FC601ED, 0xCCFBDF27 */
-r4  =  1.86459191715652901344e-02, /* 0x3F9317EA, 0x742ED475 */
-r5  =  7.77942496381893596434e-04, /* 0x3F497DDA, 0xCA41A95B */
-r6  =  7.32668430744625636189e-06, /* 0x3EDEBAF7, 0xA5B38140 */
-w0  =  4.18938533204672725052e-01, /* 0x3FDACFE3, 0x90C97D69 */
-w1  =  8.33333333333329678849e-02, /* 0x3FB55555, 0x5555553B */
-w2  = -2.77777777728775536470e-03, /* 0xBF66C16C, 0x16B02E5C */
-w3  =  7.93650558643019558500e-04, /* 0x3F4A019F, 0x98CF38B6 */
-w4  = -5.95187557450339963135e-04, /* 0xBF4380CB, 0x8C0FE741 */
-w5  =  8.36339918996282139126e-04, /* 0x3F4B67BA, 0x4CDAD5D1 */
-w6  = -1.63092934096575273989e-03; /* 0xBF5AB89D, 0x0B9E43E4 */
-
-#ifdef __STDC__
-static const double zero=  0.00000000000000000000e+00;
-#else
-static double zero=  0.00000000000000000000e+00;
-#endif
-
-#ifdef __STDC__
-	static double sin_pi(double x)
-#else
-	static double sin_pi(x)
-	double x;
-#endif
-{
-	double y,z;
-	__int32_t n,ix;
-
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-	if(ix<0x3fd00000) return __kernel_sin(pi*x,zero,0);
-	y = -x;		/* x is assume negative */
-
-    /*
-     * argument reduction, make sure inexact flag not raised if input
-     * is an integer
-     */
-	z = floor(y);
-	if(z!=y) {				/* inexact anyway */
-	    y  *= 0.5;
-	    y   = 2.0*(y - floor(y));		/* y = |x| mod 2.0 */
-	    n   = (__int32_t) (y*4.0);
-	} else {
-            if(ix>=0x43400000) {
-                y = zero; n = 0;                 /* y must be even */
-            } else {
-                if(ix<0x43300000) z = y+two52;	/* exact */
-		GET_LOW_WORD(n,z);
-		n &= 1;
-                y  = n;
-                n<<= 2;
-            }
-        }
-	switch (n) {
-	    case 0:   y =  __kernel_sin(pi*y,zero,0); break;
-	    case 1:   
-	    case 2:   y =  __kernel_cos(pi*(0.5-y),zero); break;
-	    case 3:  
-	    case 4:   y =  __kernel_sin(pi*(one-y),zero,0); break;
-	    case 5:
-	    case 6:   y = -__kernel_cos(pi*(y-1.5),zero); break;
-	    default:  y =  __kernel_sin(pi*(y-2.0),zero,0); break;
-	    }
-	return -y;
-}
-
-
-#ifdef __STDC__
-	double __ieee754_lgamma_r(double x, int *signgamp)
-#else
-	double __ieee754_lgamma_r(x,signgamp)
-	double x; int *signgamp;
-#endif
-{
-	double t,y,z,nadj,p,p1,p2,p3,q,r,w;
-	__int32_t i,hx,lx,ix;
-
-	EXTRACT_WORDS(hx,lx,x);
-
-    /* purge off +-inf, NaN, +-0, and negative arguments */
-	*signgamp = 1;
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return x*x;
-	if((ix|lx)==0) return one/zero;
-	if(ix<0x3b900000) {	/* |x|<2**-70, return -log(|x|) */
-	    if(hx<0) {
-	        *signgamp = -1;
-	        return -__ieee754_log(-x);
-	    } else return -__ieee754_log(x);
-	}
-	if(hx<0) {
-	    if(ix>=0x43300000) 	/* |x|>=2**52, must be -integer */
-		return one/zero;
-	    t = sin_pi(x);
-	    if(t==zero) return one/zero; /* -integer */
-	    nadj = __ieee754_log(pi/fabs(t*x));
-	    if(t<zero) *signgamp = -1;
-	    x = -x;
-	}
-
-    /* purge off 1 and 2 */
-	if((((ix-0x3ff00000)|lx)==0)||(((ix-0x40000000)|lx)==0)) r = 0;
-    /* for x < 2.0 */
-	else if(ix<0x40000000) {
-	    if(ix<=0x3feccccc) { 	/* lgamma(x) = lgamma(x+1)-log(x) */
-		r = -__ieee754_log(x);
-		if(ix>=0x3FE76944) {y = one-x; i= 0;}
-		else if(ix>=0x3FCDA661) {y= x-(tc-one); i=1;}
-	  	else {y = x; i=2;}
-	    } else {
-	  	r = zero;
-	        if(ix>=0x3FFBB4C3) {y=2.0-x;i=0;} /* [1.7316,2] */
-	        else if(ix>=0x3FF3B4C4) {y=x-tc;i=1;} /* [1.23,1.73] */
-		else {y=x-one;i=2;}
-	    }
-	    switch(i) {
-	      case 0:
-		z = y*y;
-		p1 = a0+z*(a2+z*(a4+z*(a6+z*(a8+z*a10))));
-		p2 = z*(a1+z*(a3+z*(a5+z*(a7+z*(a9+z*a11)))));
-		p  = y*p1+p2;
-		r  += (p-0.5*y); break;
-	      case 1:
-		z = y*y;
-		w = z*y;
-		p1 = t0+w*(t3+w*(t6+w*(t9 +w*t12)));	/* parallel comp */
-		p2 = t1+w*(t4+w*(t7+w*(t10+w*t13)));
-		p3 = t2+w*(t5+w*(t8+w*(t11+w*t14)));
-		p  = z*p1-(tt-w*(p2+y*p3));
-		r += (tf + p); break;
-	      case 2:	
-		p1 = y*(u0+y*(u1+y*(u2+y*(u3+y*(u4+y*u5)))));
-		p2 = one+y*(v1+y*(v2+y*(v3+y*(v4+y*v5))));
-		r += (-0.5*y + p1/p2);
-	    }
-	}
-	else if(ix<0x40200000) { 			/* x < 8.0 */
-	    i = (__int32_t)x;
-	    t = zero;
-	    y = x-(double)i;
-	    p = y*(s0+y*(s1+y*(s2+y*(s3+y*(s4+y*(s5+y*s6))))));
-	    q = one+y*(r1+y*(r2+y*(r3+y*(r4+y*(r5+y*r6)))));
-	    r = half*y+p/q;
-	    z = one;	/* lgamma(1+s) = log(s) + lgamma(s) */
-	    switch(i) {
-	    case 7: z *= (y+6.0);	/* FALLTHRU */
-	    case 6: z *= (y+5.0);	/* FALLTHRU */
-	    case 5: z *= (y+4.0);	/* FALLTHRU */
-	    case 4: z *= (y+3.0);	/* FALLTHRU */
-	    case 3: z *= (y+2.0);	/* FALLTHRU */
-		    r += __ieee754_log(z); break;
-	    }
-    /* 8.0 <= x < 2**58 */
-	} else if (ix < 0x43900000) {
-	    t = __ieee754_log(x);
-	    z = one/x;
-	    y = z*z;
-	    w = w0+z*(w1+y*(w2+y*(w3+y*(w4+y*(w5+y*w6)))));
-	    r = (x-half)*(t-one)+w;
-	} else 
-    /* 2**58 <= x <= inf */
-	    r =  x*(__ieee754_log(x)-one);
-	if(hx<0) r = nadj - r;
-	return r;
-}
diff --git a/newlib/libm/math/erf_gamma.c b/newlib/libm/math/erf_gamma.c
deleted file mode 100644
index 9e529dce0..000000000
--- a/newlib/libm/math/erf_gamma.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* erf_gamma.c -- float version of er_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* __ieee754_gammaf_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method: See __ieee754_lgammaf_r
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float __ieee754_gammaf_r(float x, int *signgamp)
-#else
-	float __ieee754_gammaf_r(x,signgamp)
-	float x; int *signgamp;
-#endif
-{
-	return __ieee754_expf (__ieee754_lgammaf_r(x,signgamp));
-}
diff --git a/newlib/libm/math/erf_lgamma.c b/newlib/libm/math/erf_lgamma.c
deleted file mode 100644
index 90cc5425d..000000000
--- a/newlib/libm/math/erf_lgamma.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/* erf_lgamma.c -- float version of er_lgamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-two23=  8.3886080000e+06, /* 0x4b000000 */
-half=  5.0000000000e-01, /* 0x3f000000 */
-one =  1.0000000000e+00, /* 0x3f800000 */
-pi  =  3.1415927410e+00, /* 0x40490fdb */
-a0  =  7.7215664089e-02, /* 0x3d9e233f */
-a1  =  3.2246702909e-01, /* 0x3ea51a66 */
-a2  =  6.7352302372e-02, /* 0x3d89f001 */
-a3  =  2.0580807701e-02, /* 0x3ca89915 */
-a4  =  7.3855509982e-03, /* 0x3bf2027e */
-a5  =  2.8905137442e-03, /* 0x3b3d6ec6 */
-a6  =  1.1927076848e-03, /* 0x3a9c54a1 */
-a7  =  5.1006977446e-04, /* 0x3a05b634 */
-a8  =  2.2086278477e-04, /* 0x39679767 */
-a9  =  1.0801156895e-04, /* 0x38e28445 */
-a10 =  2.5214456400e-05, /* 0x37d383a2 */
-a11 =  4.4864096708e-05, /* 0x383c2c75 */
-tc  =  1.4616321325e+00, /* 0x3fbb16c3 */
-tf  = -1.2148628384e-01, /* 0xbdf8cdcd */
-/* tt = -(tail of tf) */
-tt  =  6.6971006518e-09, /* 0x31e61c52 */
-t0  =  4.8383611441e-01, /* 0x3ef7b95e */
-t1  = -1.4758771658e-01, /* 0xbe17213c */
-t2  =  6.4624942839e-02, /* 0x3d845a15 */
-t3  = -3.2788541168e-02, /* 0xbd064d47 */
-t4  =  1.7970675603e-02, /* 0x3c93373d */
-t5  = -1.0314224288e-02, /* 0xbc28fcfe */
-t6  =  6.1005386524e-03, /* 0x3bc7e707 */
-t7  = -3.6845202558e-03, /* 0xbb7177fe */
-t8  =  2.2596477065e-03, /* 0x3b141699 */
-t9  = -1.4034647029e-03, /* 0xbab7f476 */
-t10 =  8.8108185446e-04, /* 0x3a66f867 */
-t11 = -5.3859531181e-04, /* 0xba0d3085 */
-t12 =  3.1563205994e-04, /* 0x39a57b6b */
-t13 = -3.1275415677e-04, /* 0xb9a3f927 */
-t14 =  3.3552918467e-04, /* 0x39afe9f7 */
-u0  = -7.7215664089e-02, /* 0xbd9e233f */
-u1  =  6.3282704353e-01, /* 0x3f2200f4 */
-u2  =  1.4549225569e+00, /* 0x3fba3ae7 */
-u3  =  9.7771751881e-01, /* 0x3f7a4bb2 */
-u4  =  2.2896373272e-01, /* 0x3e6a7578 */
-u5  =  1.3381091878e-02, /* 0x3c5b3c5e */
-v1  =  2.4559779167e+00, /* 0x401d2ebe */
-v2  =  2.1284897327e+00, /* 0x4008392d */
-v3  =  7.6928514242e-01, /* 0x3f44efdf */
-v4  =  1.0422264785e-01, /* 0x3dd572af */
-v5  =  3.2170924824e-03, /* 0x3b52d5db */
-s0  = -7.7215664089e-02, /* 0xbd9e233f */
-s1  =  2.1498242021e-01, /* 0x3e5c245a */
-s2  =  3.2577878237e-01, /* 0x3ea6cc7a */
-s3  =  1.4635047317e-01, /* 0x3e15dce6 */
-s4  =  2.6642270386e-02, /* 0x3cda40e4 */
-s5  =  1.8402845599e-03, /* 0x3af135b4 */
-s6  =  3.1947532989e-05, /* 0x3805ff67 */
-r1  =  1.3920053244e+00, /* 0x3fb22d3b */
-r2  =  7.2193557024e-01, /* 0x3f38d0c5 */
-r3  =  1.7193385959e-01, /* 0x3e300f6e */
-r4  =  1.8645919859e-02, /* 0x3c98bf54 */
-r5  =  7.7794247773e-04, /* 0x3a4beed6 */
-r6  =  7.3266842264e-06, /* 0x36f5d7bd */
-w0  =  4.1893854737e-01, /* 0x3ed67f1d */
-w1  =  8.3333335817e-02, /* 0x3daaaaab */
-w2  = -2.7777778450e-03, /* 0xbb360b61 */
-w3  =  7.9365057172e-04, /* 0x3a500cfd */
-w4  = -5.9518753551e-04, /* 0xba1c065c */
-w5  =  8.3633989561e-04, /* 0x3a5b3dd2 */
-w6  = -1.6309292987e-03; /* 0xbad5c4e8 */
-
-#ifdef __STDC__
-static const float zero=  0.0000000000e+00;
-#else
-static float zero=  0.0000000000e+00;
-#endif
-
-#ifdef __STDC__
-	static float sin_pif(float x)
-#else
-	static float sin_pif(x)
-	float x;
-#endif
-{
-	float y,z;
-	__int32_t n,ix;
-
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-	if(ix<0x3e800000) return __kernel_sinf(pi*x,zero,0);
-	y = -x;		/* x is assume negative */
-
-    /*
-     * argument reduction, make sure inexact flag not raised if input
-     * is an integer
-     */
-	z = floorf(y);
-	if(z!=y) {				/* inexact anyway */
-	    y  *= (float)0.5;
-	    y   = (float)2.0*(y - floorf(y));	/* y = |x| mod 2.0 */
-	    n   = (__int32_t) (y*(float)4.0);
-	} else {
-            if(ix>=0x4b800000) {
-                y = zero; n = 0;                 /* y must be even */
-            } else {
-                if(ix<0x4b000000) z = y+two23;	/* exact */
-		GET_FLOAT_WORD(n,z);
-		n &= 1;
-                y  = n;
-                n<<= 2;
-            }
-        }
-	switch (n) {
-	    case 0:   y =  __kernel_sinf(pi*y,zero,0); break;
-	    case 1:   
-	    case 2:   y =  __kernel_cosf(pi*((float)0.5-y),zero); break;
-	    case 3:  
-	    case 4:   y =  __kernel_sinf(pi*(one-y),zero,0); break;
-	    case 5:
-	    case 6:   y = -__kernel_cosf(pi*(y-(float)1.5),zero); break;
-	    default:  y =  __kernel_sinf(pi*(y-(float)2.0),zero,0); break;
-	    }
-	return -y;
-}
-
-
-#ifdef __STDC__
-	float __ieee754_lgammaf_r(float x, int *signgamp)
-#else
-	float __ieee754_lgammaf_r(x,signgamp)
-	float x; int *signgamp;
-#endif
-{
-	float t,y,z,nadj,p,p1,p2,p3,q,r,w;
-	__int32_t i,hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-
-    /* purge off +-inf, NaN, +-0, and negative arguments */
-	*signgamp = 1;
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) return x*x;
-	if(ix==0) return one/zero;
-	if(ix<0x1c800000) {	/* |x|<2**-70, return -log(|x|) */
-	    if(hx<0) {
-	        *signgamp = -1;
-	        return -__ieee754_logf(-x);
-	    } else return -__ieee754_logf(x);
-	}
-	if(hx<0) {
-	    if(ix>=0x4b000000) 	/* |x|>=2**23, must be -integer */
-		return one/zero;
-	    t = sin_pif(x);
-	    if(t==zero) return one/zero; /* -integer */
-	    nadj = __ieee754_logf(pi/fabsf(t*x));
-	    if(t<zero) *signgamp = -1;
-	    x = -x;
-	}
-
-    /* purge off 1 and 2 */
-	if (ix==0x3f800000||ix==0x40000000) r = 0;
-    /* for x < 2.0 */
-	else if(ix<0x40000000) {
-	    if(ix<=0x3f666666) { 	/* lgamma(x) = lgamma(x+1)-log(x) */
-		r = -__ieee754_logf(x);
-		if(ix>=0x3f3b4a20) {y = one-x; i= 0;}
-		else if(ix>=0x3e6d3308) {y= x-(tc-one); i=1;}
-	  	else {y = x; i=2;}
-	    } else {
-	  	r = zero;
-	        if(ix>=0x3fdda618) {y=(float)2.0-x;i=0;} /* [1.7316,2] */
-	        else if(ix>=0x3F9da620) {y=x-tc;i=1;} /* [1.23,1.73] */
-		else {y=x-one;i=2;}
-	    }
-	    switch(i) {
-	      case 0:
-		z = y*y;
-		p1 = a0+z*(a2+z*(a4+z*(a6+z*(a8+z*a10))));
-		p2 = z*(a1+z*(a3+z*(a5+z*(a7+z*(a9+z*a11)))));
-		p  = y*p1+p2;
-		r  += (p-(float)0.5*y); break;
-	      case 1:
-		z = y*y;
-		w = z*y;
-		p1 = t0+w*(t3+w*(t6+w*(t9 +w*t12)));	/* parallel comp */
-		p2 = t1+w*(t4+w*(t7+w*(t10+w*t13)));
-		p3 = t2+w*(t5+w*(t8+w*(t11+w*t14)));
-		p  = z*p1-(tt-w*(p2+y*p3));
-		r += (tf + p); break;
-	      case 2:	
-		p1 = y*(u0+y*(u1+y*(u2+y*(u3+y*(u4+y*u5)))));
-		p2 = one+y*(v1+y*(v2+y*(v3+y*(v4+y*v5))));
-		r += (-(float)0.5*y + p1/p2);
-	    }
-	}
-	else if(ix<0x41000000) { 			/* x < 8.0 */
-	    i = (__int32_t)x;
-	    t = zero;
-	    y = x-(float)i;
-	    p = y*(s0+y*(s1+y*(s2+y*(s3+y*(s4+y*(s5+y*s6))))));
-	    q = one+y*(r1+y*(r2+y*(r3+y*(r4+y*(r5+y*r6)))));
-	    r = half*y+p/q;
-	    z = one;	/* lgamma(1+s) = log(s) + lgamma(s) */
-	    switch(i) {
-	    case 7: z *= (y+(float)6.0);	/* FALLTHRU */
-	    case 6: z *= (y+(float)5.0);	/* FALLTHRU */
-	    case 5: z *= (y+(float)4.0);	/* FALLTHRU */
-	    case 4: z *= (y+(float)3.0);	/* FALLTHRU */
-	    case 3: z *= (y+(float)2.0);	/* FALLTHRU */
-		    r += __ieee754_logf(z); break;
-	    }
-    /* 8.0 <= x < 2**58 */
-	} else if (ix < 0x5c800000) {
-	    t = __ieee754_logf(x);
-	    z = one/x;
-	    y = z*z;
-	    w = w0+z*(w1+y*(w2+y*(w3+y*(w4+y*(w5+y*w6)))));
-	    r = (x-half)*(t-one)+w;
-	} else 
-    /* 2**58 <= x <= inf */
-	    r =  x*(__ieee754_logf(x)-one);
-	if(hx<0) r = nadj - r;
-	return r;
-}
diff --git a/newlib/libm/math/k_cos.c b/newlib/libm/math/k_cos.c
deleted file mode 100644
index 6c60c2438..000000000
--- a/newlib/libm/math/k_cos.c
+++ /dev/null
@@ -1,96 +0,0 @@
-
-/* @(#)k_cos.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * __kernel_cos( x,  y )
- * kernel cos function on [-pi/4, pi/4], pi/4 ~ 0.785398164
- * Input x is assumed to be bounded by ~pi/4 in magnitude.
- * Input y is the tail of x. 
- *
- * Algorithm
- *	1. Since cos(-x) = cos(x), we need only to consider positive x.
- *	2. if x < 2^-27 (hx<0x3e400000 0), return 1 with inexact if x!=0.
- *	3. cos(x) is approximated by a polynomial of degree 14 on
- *	   [0,pi/4]
- *		  	                 4            14
- *	   	cos(x) ~ 1 - x*x/2 + C1*x + ... + C6*x
- *	   where the remez error is
- *	
- * 	|              2     4     6     8     10    12     14 |     -58
- * 	|cos(x)-(1-.5*x +C1*x +C2*x +C3*x +C4*x +C5*x  +C6*x  )| <= 2
- * 	|    					               | 
- * 
- * 	               4     6     8     10    12     14 
- *	4. let r = C1*x +C2*x +C3*x +C4*x +C5*x  +C6*x  , then
- *	       cos(x) = 1 - x*x/2 + r
- *	   since cos(x+y) ~ cos(x) - sin(x)*y 
- *			  ~ cos(x) - x*y,
- *	   a correction term is necessary in cos(x) and hence
- *		cos(x+y) = 1 - (x*x/2 - (r - x*y))
- *	   For better accuracy when x > 0.3, let qx = |x|/4 with
- *	   the last 32 bits mask off, and if x > 0.78125, let qx = 0.28125.
- *	   Then
- *		cos(x+y) = (1-qx) - ((x*x/2-qx) - (r-x*y)).
- *	   Note that 1-qx and (x*x/2-qx) is EXACT here, and the
- *	   magnitude of the latter is at least a quarter of x*x/2,
- *	   thus, reducing the rounding error in the subtraction.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-C1  =  4.16666666666666019037e-02, /* 0x3FA55555, 0x5555554C */
-C2  = -1.38888888888741095749e-03, /* 0xBF56C16C, 0x16C15177 */
-C3  =  2.48015872894767294178e-05, /* 0x3EFA01A0, 0x19CB1590 */
-C4  = -2.75573143513906633035e-07, /* 0xBE927E4F, 0x809C52AD */
-C5  =  2.08757232129817482790e-09, /* 0x3E21EE9E, 0xBDB4B1C4 */
-C6  = -1.13596475577881948265e-11; /* 0xBDA8FAE9, 0xBE8838D4 */
-
-#ifdef __STDC__
-	double __kernel_cos(double x, double y)
-#else
-	double __kernel_cos(x, y)
-	double x,y;
-#endif
-{
-	double a,hz,z,r,qx;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;			/* ix = |x|'s high word*/
-	if(ix<0x3e400000) {			/* if x < 2**27 */
-	    if(((int)x)==0) return one;		/* generate inexact */
-	}
-	z  = x*x;
-	r  = z*(C1+z*(C2+z*(C3+z*(C4+z*(C5+z*C6)))));
-	if(ix < 0x3FD33333) 			/* if |x| < 0.3 */ 
-	    return one - (0.5*z - (z*r - x*y));
-	else {
-	    if(ix > 0x3fe90000) {		/* x > 0.78125 */
-		qx = 0.28125;
-	    } else {
-	        INSERT_WORDS(qx,ix-0x00200000,0);	/* x/4 */
-	    }
-	    hz = 0.5*z-qx;
-	    a  = one-qx;
-	    return a - (hz - (z*r-x*y));
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/k_rem_pio2.c b/newlib/libm/math/k_rem_pio2.c
deleted file mode 100644
index 856925668..000000000
--- a/newlib/libm/math/k_rem_pio2.c
+++ /dev/null
@@ -1,320 +0,0 @@
-
-/* @(#)k_rem_pio2.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * __kernel_rem_pio2(x,y,e0,nx,prec,ipio2)
- * double x[],y[]; int e0,nx,prec; int ipio2[];
- * 
- * __kernel_rem_pio2 return the last three digits of N with 
- *		y = x - N*pi/2
- * so that |y| < pi/2.
- *
- * The method is to compute the integer (mod 8) and fraction parts of 
- * (2/pi)*x without doing the full multiplication. In general we
- * skip the part of the product that are known to be a huge integer (
- * more accurately, = 0 mod 8 ). Thus the number of operations are
- * independent of the exponent of the input.
- *
- * (2/pi) is represented by an array of 24-bit integers in ipio2[].
- *
- * Input parameters:
- * 	x[]	The input value (must be positive) is broken into nx 
- *		pieces of 24-bit integers in double precision format.
- *		x[i] will be the i-th 24 bit of x. The scaled exponent 
- *		of x[0] is given in input parameter e0 (i.e., x[0]*2^e0 
- *		match x's up to 24 bits.
- *
- *		Example of breaking a double positive z into x[0]+x[1]+x[2]:
- *			e0 = ilogb(z)-23
- *			z  = scalbn(z,-e0)
- *		for i = 0,1,2
- *			x[i] = floor(z)
- *			z    = (z-x[i])*2**24
- *
- *
- *	y[]	ouput result in an array of double precision numbers.
- *		The dimension of y[] is:
- *			24-bit  precision	1
- *			53-bit  precision	2
- *			64-bit  precision	2
- *			113-bit precision	3
- *		The actual value is the sum of them. Thus for 113-bit
- *		precison, one may have to do something like:
- *
- *		long double t,w,r_head, r_tail;
- *		t = (long double)y[2] + (long double)y[1];
- *		w = (long double)y[0];
- *		r_head = t+w;
- *		r_tail = w - (r_head - t);
- *
- *	e0	The exponent of x[0]
- *
- *	nx	dimension of x[]
- *
- *  	prec	an integer indicating the precision:
- *			0	24  bits (single)
- *			1	53  bits (double)
- *			2	64  bits (extended)
- *			3	113 bits (quad)
- *
- *	ipio2[]
- *		integer array, contains the (24*i)-th to (24*i+23)-th 
- *		bit of 2/pi after binary point. The corresponding 
- *		floating value is
- *
- *			ipio2[i] * 2^(-24(i+1)).
- *
- * External function:
- *	double scalbn(), floor();
- *
- *
- * Here is the description of some local variables:
- *
- * 	jk	jk+1 is the initial number of terms of ipio2[] needed
- *		in the computation. The recommended value is 2,3,4,
- *		6 for single, double, extended,and quad.
- *
- * 	jz	local integer variable indicating the number of 
- *		terms of ipio2[] used. 
- *
- *	jx	nx - 1
- *
- *	jv	index for pointing to the suitable ipio2[] for the
- *		computation. In general, we want
- *			( 2^e0*x[0] * ipio2[jv-1]*2^(-24jv) )/8
- *		is an integer. Thus
- *			e0-3-24*jv >= 0 or (e0-3)/24 >= jv
- *		Hence jv = max(0,(e0-3)/24).
- *
- *	jp	jp+1 is the number of terms in PIo2[] needed, jp = jk.
- *
- * 	q[]	double array with integral value, representing the
- *		24-bits chunk of the product of x and 2/pi.
- *
- *	q0	the corresponding exponent of q[0]. Note that the
- *		exponent for q[i] would be q0-24*i.
- *
- *	PIo2[]	double precision array, obtained by cutting pi/2
- *		into 24 bits chunks. 
- *
- *	f[]	ipio2[] in floating point 
- *
- *	iq[]	integer array by breaking up q[] in 24-bits chunk.
- *
- *	fq[]	final product of x*(2/pi) in fq[0],..,fq[jk]
- *
- *	ih	integer. If >0 it indicates q[] is >= 0.5, hence
- *		it also indicates the *sign* of the result.
- *
- */
-
-
-/*
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const int init_jk[] = {2,3,4,6}; /* initial value for jk */
-#else
-static int init_jk[] = {2,3,4,6}; 
-#endif
-
-#ifdef __STDC__
-static const double PIo2[] = {
-#else
-static double PIo2[] = {
-#endif
-  1.57079625129699707031e+00, /* 0x3FF921FB, 0x40000000 */
-  7.54978941586159635335e-08, /* 0x3E74442D, 0x00000000 */
-  5.39030252995776476554e-15, /* 0x3CF84698, 0x80000000 */
-  3.28200341580791294123e-22, /* 0x3B78CC51, 0x60000000 */
-  1.27065575308067607349e-29, /* 0x39F01B83, 0x80000000 */
-  1.22933308981111328932e-36, /* 0x387A2520, 0x40000000 */
-  2.73370053816464559624e-44, /* 0x36E38222, 0x80000000 */
-  2.16741683877804819444e-51, /* 0x3569F31D, 0x00000000 */
-};
-
-#ifdef __STDC__
-static const double			
-#else
-static double			
-#endif
-zero   = 0.0,
-one    = 1.0,
-two24   =  1.67772160000000000000e+07, /* 0x41700000, 0x00000000 */
-twon24  =  5.96046447753906250000e-08; /* 0x3E700000, 0x00000000 */
-
-#ifdef __STDC__
-	int __kernel_rem_pio2(double *x, double *y, int e0, int nx, int prec, const __int32_t *ipio2) 
-#else
-	int __kernel_rem_pio2(x,y,e0,nx,prec,ipio2) 	
-	double x[], y[]; int e0,nx,prec; __int32_t ipio2[];
-#endif
-{
-	__int32_t jz,jx,jv,jp,jk,carry,n,iq[20],i,j,k,m,q0,ih;
-	double z,fw,f[20],fq[20],q[20];
-
-    /* initialize jk*/
-	jk = init_jk[prec];
-	jp = jk;
-
-    /* determine jx,jv,q0, note that 3>q0 */
-	jx =  nx-1;
-	jv = (e0-3)/24; if(jv<0) jv=0;
-	q0 =  e0-24*(jv+1);
-
-    /* set up f[0] to f[jx+jk] where f[jx+jk] = ipio2[jv+jk] */
-	j = jv-jx; m = jx+jk;
-	for(i=0;i<=m;i++,j++) f[i] = (j<0)? zero : (double) ipio2[j];
-
-    /* compute q[0],q[1],...q[jk] */
-	for (i=0;i<=jk;i++) {
-	    for(j=0,fw=0.0;j<=jx;j++) fw += x[j]*f[jx+i-j]; q[i] = fw;
-	}
-
-	jz = jk;
-recompute:
-    /* distill q[] into iq[] reversingly */
-	for(i=0,j=jz,z=q[jz];j>0;i++,j--) {
-	    fw    =  (double)((__int32_t)(twon24* z));
-	    iq[i] =  (__int32_t)(z-two24*fw);
-	    z     =  q[j-1]+fw;
-	}
-
-    /* compute n */
-	z  = scalbn(z,(int)q0);		/* actual value of z */
-	z -= 8.0*floor(z*0.125);		/* trim off integer >= 8 */
-	n  = (__int32_t) z;
-	z -= (double)n;
-	ih = 0;
-	if(q0>0) {	/* need iq[jz-1] to determine n */
-	    i  = (iq[jz-1]>>(24-q0)); n += i;
-	    iq[jz-1] -= i<<(24-q0);
-	    ih = iq[jz-1]>>(23-q0);
-	} 
-	else if(q0==0) ih = iq[jz-1]>>23;
-	else if(z>=0.5) ih=2;
-
-	if(ih>0) {	/* q > 0.5 */
-	    n += 1; carry = 0;
-	    for(i=0;i<jz ;i++) {	/* compute 1-q */
-		j = iq[i];
-		if(carry==0) {
-		    if(j!=0) {
-			carry = 1; iq[i] = 0x1000000- j;
-		    }
-		} else  iq[i] = 0xffffff - j;
-	    }
-	    if(q0>0) {		/* rare case: chance is 1 in 12 */
-	        switch(q0) {
-	        case 1:
-	    	   iq[jz-1] &= 0x7fffff; break;
-	    	case 2:
-	    	   iq[jz-1] &= 0x3fffff; break;
-	        }
-	    }
-	    if(ih==2) {
-		z = one - z;
-		if(carry!=0) z -= scalbn(one,(int)q0);
-	    }
-	}
-
-    /* check if recomputation is needed */
-	if(z==zero) {
-	    j = 0;
-	    for (i=jz-1;i>=jk;i--) j |= iq[i];
-	    if(j==0) { /* need recomputation */
-		for(k=1;iq[jk-k]==0;k++);   /* k = no. of terms needed */
-
-		for(i=jz+1;i<=jz+k;i++) {   /* add q[jz+1] to q[jz+k] */
-		    f[jx+i] = (double) ipio2[jv+i];
-		    for(j=0,fw=0.0;j<=jx;j++) fw += x[j]*f[jx+i-j];
-		    q[i] = fw;
-		}
-		jz += k;
-		goto recompute;
-	    }
-	}
-
-    /* chop off zero terms */
-	if(z==0.0) {
-	    jz -= 1; q0 -= 24;
-	    while(iq[jz]==0) { jz--; q0-=24;}
-	} else { /* break z into 24-bit if necessary */
-	    z = scalbn(z,-(int)q0);
-	    if(z>=two24) { 
-		fw = (double)((__int32_t)(twon24*z));
-		iq[jz] = (__int32_t)(z-two24*fw);
-		jz += 1; q0 += 24;
-		iq[jz] = (__int32_t) fw;
-	    } else iq[jz] = (__int32_t) z ;
-	}
-
-    /* convert integer "bit" chunk to floating-point value */
-	fw = scalbn(one,(int)q0);
-	for(i=jz;i>=0;i--) {
-	    q[i] = fw*(double)iq[i]; fw*=twon24;
-	}
-
-    /* compute PIo2[0,...,jp]*q[jz,...,0] */
-	for(i=jz;i>=0;i--) {
-	    for(fw=0.0,k=0;k<=jp&&k<=jz-i;k++) fw += PIo2[k]*q[i+k];
-	    fq[jz-i] = fw;
-	}
-
-    /* compress fq[] into y[] */
-	switch(prec) {
-	    case 0:
-		fw = 0.0;
-		for (i=jz;i>=0;i--) fw += fq[i];
-		y[0] = (ih==0)? fw: -fw; 
-		break;
-	    case 1:
-	    case 2:
-		fw = 0.0;
-		for (i=jz;i>=0;i--) fw += fq[i]; 
-		y[0] = (ih==0)? fw: -fw; 
-		fw = fq[0]-fw;
-		for (i=1;i<=jz;i++) fw += fq[i];
-		y[1] = (ih==0)? fw: -fw; 
-		break;
-	    case 3:	/* painful */
-		for (i=jz;i>0;i--) {
-		    fw      = fq[i-1]+fq[i]; 
-		    fq[i]  += fq[i-1]-fw;
-		    fq[i-1] = fw;
-		}
-		for (i=jz;i>1;i--) {
-		    fw      = fq[i-1]+fq[i]; 
-		    fq[i]  += fq[i-1]-fw;
-		    fq[i-1] = fw;
-		}
-		for (fw=0.0,i=jz;i>=2;i--) fw += fq[i]; 
-		if(ih==0) {
-		    y[0] =  fq[0]; y[1] =  fq[1]; y[2] =  fw;
-		} else {
-		    y[0] = -fq[0]; y[1] = -fq[1]; y[2] = -fw;
-		}
-	}
-	return n&7;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/k_sin.c b/newlib/libm/math/k_sin.c
deleted file mode 100644
index f119916df..000000000
--- a/newlib/libm/math/k_sin.c
+++ /dev/null
@@ -1,79 +0,0 @@
-
-/* @(#)k_sin.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __kernel_sin( x, y, iy)
- * kernel sin function on [-pi/4, pi/4], pi/4 ~ 0.7854
- * Input x is assumed to be bounded by ~pi/4 in magnitude.
- * Input y is the tail of x.
- * Input iy indicates whether y is 0. (if iy=0, y assume to be 0). 
- *
- * Algorithm
- *	1. Since sin(-x) = -sin(x), we need only to consider positive x. 
- *	2. if x < 2^-27 (hx<0x3e400000 0), return x with inexact if x!=0.
- *	3. sin(x) is approximated by a polynomial of degree 13 on
- *	   [0,pi/4]
- *		  	         3            13
- *	   	sin(x) ~ x + S1*x + ... + S6*x
- *	   where
- *	
- * 	|sin(x)         2     4     6     8     10     12  |     -58
- * 	|----- - (1+S1*x +S2*x +S3*x +S4*x +S5*x  +S6*x   )| <= 2
- * 	|  x 					           | 
- * 
- *	4. sin(x+y) = sin(x) + sin'(x')*y
- *		    ~ sin(x) + (1-x*x/2)*y
- *	   For better accuracy, let 
- *		     3      2      2      2      2
- *		r = x *(S2+x *(S3+x *(S4+x *(S5+x *S6))))
- *	   then                   3    2
- *		sin(x) = x + (S1*x + (x *(r-y/2)+y))
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-half =  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-S1  = -1.66666666666666324348e-01, /* 0xBFC55555, 0x55555549 */
-S2  =  8.33333333332248946124e-03, /* 0x3F811111, 0x1110F8A6 */
-S3  = -1.98412698298579493134e-04, /* 0xBF2A01A0, 0x19C161D5 */
-S4  =  2.75573137070700676789e-06, /* 0x3EC71DE3, 0x57B1FE7D */
-S5  = -2.50507602534068634195e-08, /* 0xBE5AE5E6, 0x8A2B9CEB */
-S6  =  1.58969099521155010221e-10; /* 0x3DE5D93A, 0x5ACFD57C */
-
-#ifdef __STDC__
-	double __kernel_sin(double x, double y, int iy)
-#else
-	double __kernel_sin(x, y, iy)
-	double x,y; int iy;		/* iy=0 if y is zero */
-#endif
-{
-	double z,r,v;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;			/* high word of x */
-	if(ix<0x3e400000)			/* |x| < 2**-27 */
-	   {if((int)x==0) return x;}		/* generate inexact */
-	z	=  x*x;
-	v	=  z*x;
-	r	=  S2+z*(S3+z*(S4+z*(S5+z*S6)));
-	if(iy==0) return x+v*(S1+z*r);
-	else      return x-((z*(half*y-v*r)-y)-v*S1);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/k_standard.c b/newlib/libm/math/k_standard.c
deleted file mode 100644
index 0d72f1a53..000000000
--- a/newlib/libm/math/k_standard.c
+++ /dev/null
@@ -1,784 +0,0 @@
-
-/* @(#)k_standard.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _USE_WRITE
-#include <stdio.h>			/* fputs(), stderr */
-#define	WRITE2(u,v)	fputs(u, stderr)
-#else	/* !defined(_USE_WRITE) */
-#include <unistd.h>			/* write */
-#define	WRITE2(u,v)	write(2, u, v)
-#undef fflush
-#endif	/* !defined(_USE_WRITE) */
-
-#ifdef __STDC__
-static const double zero = 0.0;	/* used as const */
-#else
-static double zero = 0.0;	/* used as const */
-#endif
-
-/* 
- * Standard conformance (non-IEEE) on exception cases.
- * Mapping:
- *	1 -- acos(|x|>1)
- *	2 -- asin(|x|>1)
- *	3 -- atan2(+-0,+-0)
- *	4 -- hypot overflow
- *	5 -- cosh overflow
- *	6 -- exp overflow
- *	7 -- exp underflow
- *	8 -- y0(0)
- *	9 -- y0(-ve)
- *	10-- y1(0)
- *	11-- y1(-ve)
- *	12-- yn(0)
- *	13-- yn(-ve)
- *	14-- lgamma(finite) overflow
- *	15-- lgamma(-integer)
- *	16-- log(0)
- *	17-- log(x<0)
- *	18-- log10(0)
- *	19-- log10(x<0)
- *	20-- pow(0.0,0.0)
- *	21-- pow(x,y) overflow
- *	22-- pow(x,y) underflow
- *	23-- pow(0,negative) 
- *	24-- pow(neg,non-integral)
- *	25-- sinh(finite) overflow
- *	26-- sqrt(negative)
- *      27-- fmod(x,0)
- *      28-- remainder(x,0)
- *	29-- acosh(x<1)
- *	30-- atanh(|x|>1)
- *	31-- atanh(|x|=1)
- *	32-- scalb overflow
- *	33-- scalb underflow
- *	34-- j0(|x|>X_TLOSS)
- *	35-- y0(x>X_TLOSS)
- *	36-- j1(|x|>X_TLOSS)
- *	37-- y1(x>X_TLOSS)
- *	38-- jn(|x|>X_TLOSS, n)
- *	39-- yn(x>X_TLOSS, n)
- *	40-- gamma(finite) overflow
- *	41-- gamma(-integer)
- *	42-- pow(NaN,0.0)
- */
-
-
-#ifdef __STDC__
-	double __kernel_standard(double x, double y, int type) 
-#else
-	double __kernel_standard(x,y,type) 
-	double x,y; int type;
-#endif
-{
-	struct exception exc;
-#ifndef HUGE_VAL	/* this is the only routine that uses HUGE_VAL */ 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-
-#ifdef _USE_WRITE
-        /* (void) fflush(_stdout_r(p)); */        
-#endif
-	exc.arg1 = x;
-	exc.arg2 = y;
-	exc.err = 0;
-	switch(type) {
-	    case 1:
-	    case 101:
-		/* acos(|x|>1) */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "acos" : "acosf";
-		exc.retval = zero;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if(_LIB_VERSION == _SVID_) {
-		    (void) WRITE2("acos: DOMAIN error\n", 19);
-		  } */
-		  errno = EDOM;
-		}
-		break;
-	    case 2:
-	    case 102:
-		/* asin(|x|>1) */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "asin" : "asinf";
-		exc.retval = zero;
-		if(_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if(_LIB_VERSION == _SVID_) {
-		    	(void) WRITE2("asin: DOMAIN error\n", 19);
-		  } */
-		  errno = EDOM;
-		}
-		break;
-	    case 3:
-	    case 103:
-		/* atan2(+-0,+-0) */
-		exc.arg1 = y;
-		exc.arg2 = x;
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "atan2" : "atan2f";
-		exc.retval = zero;
-		if(_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if(_LIB_VERSION == _SVID_) {
-			(void) WRITE2("atan2: DOMAIN error\n", 20);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 4:
-	    case 104:
-		/* hypot(finite,finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "hypot" : "hypotf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = HUGE;
-		else
-		  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 5:
-	    case 105:
-		/* cosh(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "cosh" : "coshf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = HUGE;
-		else
-		  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 6:
-	    case 106:
-		/* exp(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "exp" : "expf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = HUGE;
-		else
-		  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 7:
-	    case 107:
-		/* exp(finite) underflow */
-		exc.type = UNDERFLOW;
-		exc.name = type < 100 ? "exp" : "expf";
-		exc.retval = zero;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 8:
-	    case 108:
-		/* y0(0) = -inf */
-		exc.type = DOMAIN;	/* should be SING for IEEE */
-		exc.name = type < 100 ? "y0" : "y0f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("y0: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 9:
-	    case 109:
-		/* y0(x<0) = NaN */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "y0" : "y0f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /*if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("y0: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 10:
-	    case 110:
-		/* y1(0) = -inf */
-		exc.type = DOMAIN;	/* should be SING for IEEE */
-		exc.name = type < 100 ? "y1" : "y1f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("y1: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 11:
-	    case 111:
-		/* y1(x<0) = NaN */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "y1" : "y1f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("y1: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 12:
-	    case 112:
-		/* yn(n,0) = -inf */
-		exc.type = DOMAIN;	/* should be SING for IEEE */
-		exc.name = type < 100 ? "yn" : "ynf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("yn: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 13:
-	    case 113:
-		/* yn(x<0) = NaN */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "yn" : "ynf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("yn: DOMAIN error\n", 17);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 14:
-	    case 114:
-		/* lgamma(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "lgamma" : "lgammaf";
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-                if (_LIB_VERSION == _POSIX_)
-			errno = ERANGE;
-                else if (!matherr(&exc)) {
-                        errno = ERANGE;
-		}
-		break;
-	    case 15:
-	    case 115:
-		/* lgamma(-integer) or lgamma(0) */
-		exc.type = SING;
-		exc.name = type < 100 ? "lgamma" : "lgammaf";
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("lgamma: SING error\n", 19);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 16:
-	    case 116:
-		/* log(0) */
-		exc.type = SING;
-		exc.name = type < 100 ? "log" : "logf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("log: SING error\n", 16);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 17:
-	    case 117:
-		/* log(x<0) */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "log" : "logf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("log: DOMAIN error\n", 18);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 18:
-	    case 118:
-		/* log10(0) */
-		exc.type = SING;
-		exc.name = type < 100 ? "log10" : "log10f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("log10: SING error\n", 18);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 19:
-	    case 119:
-		/* log10(x<0) */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "log10" : "log10f";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = -HUGE;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("log10: DOMAIN error\n", 20);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 20:
-	    case 120:
-		/* pow(0.0,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "pow" : "powf";
-		exc.retval = zero;
-		if (_LIB_VERSION != _SVID_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-		  /* (void) WRITE2("pow(0,0): DOMAIN error\n", 23); */
-			errno = EDOM;
-		}
-		break;
-	    case 21:
-	    case 121:
-		/* pow(x,y) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "pow" : "powf";
-		if (_LIB_VERSION == _SVID_) {
-		  exc.retval = HUGE;
-		  y *= 0.5;
-		  if(x<zero&&rint(y)!=y) exc.retval = -HUGE;
-		} else {
-		  exc.retval = HUGE_VAL;
-		  y *= 0.5;
-		  if(x<zero&&rint(y)!=y) exc.retval = -HUGE_VAL;
-		}
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 22:
-	    case 122:
-		/* pow(x,y) underflow */
-		exc.type = UNDERFLOW;
-		exc.name = type < 100 ? "pow" : "powf";
-		exc.retval =  zero;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 23:
-	    case 123:
-		/* 0**neg */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "pow" : "powf";
-		if (_LIB_VERSION == _SVID_) 
-		  exc.retval = zero;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("pow(0,neg): DOMAIN error\n", 25);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 24:
-	    case 124:
-		/* neg**non-integral */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "pow" : "powf";
-		if (_LIB_VERSION == _SVID_) 
-		    exc.retval = zero;
-		else 
-		    exc.retval = zero/zero;	/* X/Open allow NaN */
-		if (_LIB_VERSION == _POSIX_) 
-		   errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("neg**non-integral: DOMAIN error\n", 32);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 25:
-	    case 125:
-		/* sinh(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "sinh" : "sinhf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = ( (x>zero) ? HUGE : -HUGE);
-		else
-		  exc.retval = ( (x>zero) ? HUGE_VAL : -HUGE_VAL);
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 26:
-	    case 126:
-		/* sqrt(x<0) */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "sqrt" : "sqrtf";
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = zero;
-		else
-		  exc.retval = zero/zero;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("sqrt: DOMAIN error\n", 19);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-            case 27:
-	    case 127:
-                /* fmod(x,0) */
-                exc.type = DOMAIN;
-                exc.name = type < 100 ? "fmod" : "fmodf";
-                if (_LIB_VERSION == _SVID_)
-                    exc.retval = x;
-		else
-		    exc.retval = zero/zero;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  /* if (_LIB_VERSION == _SVID_) {
-                    (void) WRITE2("fmod:  DOMAIN error\n", 20);
-                  } */
-                  errno = EDOM;
-                }
-                break;
-            case 28:
-	    case 128:
-                /* remainder(x,0) */
-                exc.type = DOMAIN;
-                exc.name = type < 100 ? "remainder" : "remainderf";
-                exc.retval = zero/zero;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  /* if (_LIB_VERSION == _SVID_) {
-                    (void) WRITE2("remainder: DOMAIN error\n", 24);
-                  } */
-                  errno = EDOM;
-                }
-                break;
-            case 29:
-	    case 129:
-                /* acosh(x<1) */
-                exc.type = DOMAIN;
-                exc.name = type < 100 ? "acosh" : "acoshf";
-                exc.retval = zero/zero;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  /* if (_LIB_VERSION == _SVID_) {
-                    (void) WRITE2("acosh: DOMAIN error\n", 20);
-                  } */
-                  errno = EDOM;
-                }
-                break;
-            case 30:
-	    case 130:
-                /* atanh(|x|>1) */
-                exc.type = DOMAIN;
-                exc.name = type < 100 ? "atanh" : "atanhf";
-                exc.retval = zero/zero;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  /* if (_LIB_VERSION == _SVID_) {
-                    (void) WRITE2("atanh: DOMAIN error\n", 20);
-                  } */
-                  errno = EDOM;
-                }
-                break;
-            case 31:
-	    case 131:
-                /* atanh(|x|=1) */
-                exc.type = SING;
-                exc.name = type < 100 ? "atanh" : "atanhf";
-		exc.retval = x/zero;	/* sign(x)*inf */
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  /* if (_LIB_VERSION == _SVID_) {
-                    (void) WRITE2("atanh: SING error\n", 18);
-                  } */
-                  errno = EDOM;
-                }
-                break;
-	    case 32:
-	    case 132:
-		/* scalb overflow; SVID also returns +-HUGE_VAL */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "scalb" : "scalbf";
-		exc.retval = x > zero ? HUGE_VAL : -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 33:
-	    case 133:
-		/* scalb underflow */
-		exc.type = UNDERFLOW;
-		exc.name = type < 100 ? "scalb" : "scalbf";
-		exc.retval = copysign(zero,x);
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-		break;
-	    case 34:
-	    case 134:
-		/* j0(|x|>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "j0" : "j0f";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 35:
-	    case 135:
-		/* y0(x>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "y0" : "y0f";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 36:
-	    case 136:
-		/* j1(|x|>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "j1" : "j1f";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 37:
-	    case 137:
-		/* y1(x>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "y1" : "y1f";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 38:
-	    case 138:
-		/* jn(|x|>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "jn" : "jnf";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 39:
-	    case 139:
-		/* yn(x>X_TLOSS) */
-                exc.type = TLOSS;
-                exc.name = type < 100 ? "yn" : "ynf";
-                exc.retval = zero;
-                if (_LIB_VERSION == _POSIX_)
-                        errno = ERANGE;
-                else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-                                (void) WRITE2(exc.name, 2);
-                                (void) WRITE2(": TLOSS error\n", 14);
-                        } */
-                        errno = ERANGE;
-                }        
-		break;
-	    case 40:
-	    case 140:
-		/* gamma(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = type < 100 ? "gamma" : "gammaf";
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-                if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-                else if (!matherr(&exc)) {
-                  errno = ERANGE;
-                }
-		break;
-	    case 41:
-	    case 141:
-		/* gamma(-integer) or gamma(0) */
-		exc.type = SING;
-		exc.name = type < 100 ? "gamma" : "gammaf";
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  /* if (_LIB_VERSION == _SVID_) {
-			(void) WRITE2("gamma: SING error\n", 18);
-		      } */
-		  errno = EDOM;
-		}
-		break;
-	    case 42:
-	    case 142:
-		/* pow(NaN,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ & _XOPEN_ */
-		exc.type = DOMAIN;
-		exc.name = type < 100 ? "pow" : "powf";
-		exc.retval = x;
-		if (_LIB_VERSION == _IEEE_ ||
-		    _LIB_VERSION == _POSIX_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-			errno = EDOM;
-		}
-		break;
-	}
-	if (exc.err != 0)
-	    errno = exc.err;
-	return exc.retval; 
-}
-
-
diff --git a/newlib/libm/math/k_tan.c b/newlib/libm/math/k_tan.c
deleted file mode 100644
index 9f5b30760..000000000
--- a/newlib/libm/math/k_tan.c
+++ /dev/null
@@ -1,132 +0,0 @@
-
-/* @(#)k_tan.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* __kernel_tan( x, y, k )
- * kernel tan function on [-pi/4, pi/4], pi/4 ~ 0.7854
- * Input x is assumed to be bounded by ~pi/4 in magnitude.
- * Input y is the tail of x.
- * Input k indicates whether tan (if k=1) or 
- * -1/tan (if k= -1) is returned.
- *
- * Algorithm
- *	1. Since tan(-x) = -tan(x), we need only to consider positive x. 
- *	2. if x < 2^-28 (hx<0x3e300000 0), return x with inexact if x!=0.
- *	3. tan(x) is approximated by a odd polynomial of degree 27 on
- *	   [0,0.67434]
- *		  	         3             27
- *	   	tan(x) ~ x + T1*x + ... + T13*x
- *	   where
- *	
- * 	        |tan(x)         2     4            26   |     -59.2
- * 	        |----- - (1+T1*x +T2*x +.... +T13*x    )| <= 2
- * 	        |  x 					| 
- * 
- *	   Note: tan(x+y) = tan(x) + tan'(x)*y
- *		          ~ tan(x) + (1+x*x)*y
- *	   Therefore, for better accuracy in computing tan(x+y), let 
- *		     3      2      2       2       2
- *		r = x *(T2+x *(T3+x *(...+x *(T12+x *T13))))
- *	   then
- *		 		    3    2
- *		tan(x+y) = x + (T1*x + (x *(r+y)+y))
- *
- *      4. For x in [0.67434,pi/4],  let y = pi/4 - x, then
- *		tan(x) = tan(pi/4-y) = (1-tan(y))/(1+tan(y))
- *		       = 1 - 2*(tan(y) - (tan(y)^2)/(1+tan(y)))
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one   =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-pio4  =  7.85398163397448278999e-01, /* 0x3FE921FB, 0x54442D18 */
-pio4lo=  3.06161699786838301793e-17, /* 0x3C81A626, 0x33145C07 */
-T[] =  {
-  3.33333333333334091986e-01, /* 0x3FD55555, 0x55555563 */
-  1.33333333333201242699e-01, /* 0x3FC11111, 0x1110FE7A */
-  5.39682539762260521377e-02, /* 0x3FABA1BA, 0x1BB341FE */
-  2.18694882948595424599e-02, /* 0x3F9664F4, 0x8406D637 */
-  8.86323982359930005737e-03, /* 0x3F8226E3, 0xE96E8493 */
-  3.59207910759131235356e-03, /* 0x3F6D6D22, 0xC9560328 */
-  1.45620945432529025516e-03, /* 0x3F57DBC8, 0xFEE08315 */
-  5.88041240820264096874e-04, /* 0x3F4344D8, 0xF2F26501 */
-  2.46463134818469906812e-04, /* 0x3F3026F7, 0x1A8D1068 */
-  7.81794442939557092300e-05, /* 0x3F147E88, 0xA03792A6 */
-  7.14072491382608190305e-05, /* 0x3F12B80F, 0x32F0A7E9 */
- -1.85586374855275456654e-05, /* 0xBEF375CB, 0xDB605373 */
-  2.59073051863633712884e-05, /* 0x3EFB2A70, 0x74BF7AD4 */
-};
-
-#ifdef __STDC__
-	double __kernel_tan(double x, double y, int iy)
-#else
-	double __kernel_tan(x, y, iy)
-	double x,y; int iy;
-#endif
-{
-	double z,r,v,w,s;
-	__int32_t ix,hx;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;	/* high word of |x| */
-	if(ix<0x3e300000)			/* x < 2**-28 */
-	    {if((int)x==0) {			/* generate inexact */
-	        __uint32_t low;
-		GET_LOW_WORD(low,x);
-		if(((ix|low)|(iy+1))==0) return one/fabs(x);
-		else return (iy==1)? x: -one/x;
-	    }
-	    }
-	if(ix>=0x3FE59428) { 			/* |x|>=0.6744 */
-	    if(hx<0) {x = -x; y = -y;}
-	    z = pio4-x;
-	    w = pio4lo-y;
-	    x = z+w; y = 0.0;
-	}
-	z	=  x*x;
-	w 	=  z*z;
-    /* Break x^5*(T[1]+x^2*T[2]+...) into
-     *	  x^5(T[1]+x^4*T[3]+...+x^20*T[11]) +
-     *	  x^5(x^2*(T[2]+x^4*T[4]+...+x^22*[T12]))
-     */
-	r = T[1]+w*(T[3]+w*(T[5]+w*(T[7]+w*(T[9]+w*T[11]))));
-	v = z*(T[2]+w*(T[4]+w*(T[6]+w*(T[8]+w*(T[10]+w*T[12])))));
-	s = z*x;
-	r = y + z*(s*(r+v)+y);
-	r += T[0]*s;
-	w = x+r;
-	if(ix>=0x3FE59428) {
-	    v = (double)iy;
-	    return (double)(1-((hx>>30)&2))*(v-2.0*(x-(w*w/(w+v)-r)));
-	}
-	if(iy==1) return w;
-	else {		/* if allow error up to 2 ulp, 
-			   simply return -1.0/(x+r) here */
-     /*  compute -1.0/(x+r) accurately */
-	    double a,t;
-	    z  = w;
-	    SET_LOW_WORD(z,0);
-	    v  = r-(z - x); 	/* z+v = r+x */
-	    t = a  = -1.0/w;	/* a = -1.0/w */
-	    SET_LOW_WORD(t,0);
-	    s  = 1.0+t*z;
-	    return t+a*(s+t*v);
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/kf_cos.c b/newlib/libm/math/kf_cos.c
deleted file mode 100644
index 4f71af237..000000000
--- a/newlib/libm/math/kf_cos.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* kf_cos.c -- float version of k_cos.c
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one =  1.0000000000e+00, /* 0x3f800000 */
-C1  =  4.1666667908e-02, /* 0x3d2aaaab */
-C2  = -1.3888889225e-03, /* 0xbab60b61 */
-C3  =  2.4801587642e-05, /* 0x37d00d01 */
-C4  = -2.7557314297e-07, /* 0xb493f27c */
-C5  =  2.0875723372e-09, /* 0x310f74f6 */
-C6  = -1.1359647598e-11; /* 0xad47d74e */
-
-#ifdef __STDC__
-	float __kernel_cosf(float x, float y)
-#else
-	float __kernel_cosf(x, y)
-	float x,y;
-#endif
-{
-	float a,hz,z,r,qx;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;			/* ix = |x|'s high word*/
-	if(ix<0x32000000) {			/* if x < 2**27 */
-	    if(((int)x)==0) return one;		/* generate inexact */
-	}
-	z  = x*x;
-	r  = z*(C1+z*(C2+z*(C3+z*(C4+z*(C5+z*C6)))));
-	if(ix < 0x3e99999a) 			/* if |x| < 0.3 */ 
-	    return one - ((float)0.5*z - (z*r - x*y));
-	else {
-	    if(ix > 0x3f480000) {		/* x > 0.78125 */
-		qx = (float)0.28125;
-	    } else {
-	        SET_FLOAT_WORD(qx,ix-0x01000000);	/* x/4 */
-	    }
-	    hz = (float)0.5*z-qx;
-	    a  = one-qx;
-	    return a - (hz - (z*r-x*y));
-	}
-}
diff --git a/newlib/libm/math/kf_rem_pio2.c b/newlib/libm/math/kf_rem_pio2.c
deleted file mode 100644
index 261c48129..000000000
--- a/newlib/libm/math/kf_rem_pio2.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/* kf_rem_pio2.c -- float version of k_rem_pio2.c
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-/* In the float version, the input parameter x contains 8 bit
-   integers, not 24 bit integers.  113 bit precision is not supported.  */
-
-#ifdef __STDC__
-static const int init_jk[] = {4,7,9}; /* initial value for jk */
-#else
-static int init_jk[] = {4,7,9}; 
-#endif
-
-#ifdef __STDC__
-static const float PIo2[] = {
-#else
-static float PIo2[] = {
-#endif
-  1.5703125000e+00, /* 0x3fc90000 */
-  4.5776367188e-04, /* 0x39f00000 */
-  2.5987625122e-05, /* 0x37da0000 */
-  7.5437128544e-08, /* 0x33a20000 */
-  6.0026650317e-11, /* 0x2e840000 */
-  7.3896444519e-13, /* 0x2b500000 */
-  5.3845816694e-15, /* 0x27c20000 */
-  5.6378512969e-18, /* 0x22d00000 */
-  8.3009228831e-20, /* 0x1fc40000 */
-  3.2756352257e-22, /* 0x1bc60000 */
-  6.3331015649e-25, /* 0x17440000 */
-};
-
-#ifdef __STDC__
-static const float			
-#else
-static float			
-#endif
-zero   = 0.0,
-one    = 1.0,
-two8   =  2.5600000000e+02, /* 0x43800000 */
-twon8  =  3.9062500000e-03; /* 0x3b800000 */
-
-#ifdef __STDC__
-	int __kernel_rem_pio2f(float *x, float *y, int e0, int nx, int prec, const __int32_t *ipio2) 
-#else
-	int __kernel_rem_pio2f(x,y,e0,nx,prec,ipio2) 	
-	float x[], y[]; int e0,nx,prec; __int32_t ipio2[];
-#endif
-{
-	__int32_t jz,jx,jv,jp,jk,carry,n,iq[20],i,j,k,m,q0,ih;
-	float z,fw,f[20],fq[20],q[20];
-
-    /* initialize jk*/
-	jk = init_jk[prec];
-	jp = jk;
-
-    /* determine jx,jv,q0, note that 3>q0 */
-	jx =  nx-1;
-	jv = (e0-3)/8; if(jv<0) jv=0;
-	q0 =  e0-8*(jv+1);
-
-    /* set up f[0] to f[jx+jk] where f[jx+jk] = ipio2[jv+jk] */
-	j = jv-jx; m = jx+jk;
-	for(i=0;i<=m;i++,j++) f[i] = (j<0)? zero : (float) ipio2[j];
-
-    /* compute q[0],q[1],...q[jk] */
-	for (i=0;i<=jk;i++) {
-	    for(j=0,fw=0.0;j<=jx;j++) fw += x[j]*f[jx+i-j]; q[i] = fw;
-	}
-
-	jz = jk;
-recompute:
-    /* distill q[] into iq[] reversingly */
-	for(i=0,j=jz,z=q[jz];j>0;i++,j--) {
-	    fw    =  (float)((__int32_t)(twon8* z));
-	    iq[i] =  (__int32_t)(z-two8*fw);
-	    z     =  q[j-1]+fw;
-	}
-
-    /* compute n */
-	z  = scalbnf(z,(int)q0);	/* actual value of z */
-	z -= (float)8.0*floorf(z*(float)0.125);	/* trim off integer >= 8 */
-	n  = (__int32_t) z;
-	z -= (float)n;
-	ih = 0;
-	if(q0>0) {	/* need iq[jz-1] to determine n */
-	    i  = (iq[jz-1]>>(8-q0)); n += i;
-	    iq[jz-1] -= i<<(8-q0);
-	    ih = iq[jz-1]>>(7-q0);
-	} 
-	else if(q0==0) ih = iq[jz-1]>>8;
-	else if(z>=(float)0.5) ih=2;
-
-	if(ih>0) {	/* q > 0.5 */
-	    n += 1; carry = 0;
-	    for(i=0;i<jz ;i++) {	/* compute 1-q */
-		j = iq[i];
-		if(carry==0) {
-		    if(j!=0) {
-			carry = 1; iq[i] = 0x100- j;
-		    }
-		} else  iq[i] = 0xff - j;
-	    }
-	    if(q0>0) {		/* rare case: chance is 1 in 12 */
-	        switch(q0) {
-	        case 1:
-	    	   iq[jz-1] &= 0x7f; break;
-	    	case 2:
-	    	   iq[jz-1] &= 0x3f; break;
-	        }
-	    }
-	    if(ih==2) {
-		z = one - z;
-		if(carry!=0) z -= scalbnf(one,(int)q0);
-	    }
-	}
-
-    /* check if recomputation is needed */
-	if(z==zero) {
-	    j = 0;
-	    for (i=jz-1;i>=jk;i--) j |= iq[i];
-	    if(j==0) { /* need recomputation */
-		for(k=1;iq[jk-k]==0;k++);   /* k = no. of terms needed */
-
-		for(i=jz+1;i<=jz+k;i++) {   /* add q[jz+1] to q[jz+k] */
-		    f[jx+i] = (float) ipio2[jv+i];
-		    for(j=0,fw=0.0;j<=jx;j++) fw += x[j]*f[jx+i-j];
-		    q[i] = fw;
-		}
-		jz += k;
-		goto recompute;
-	    }
-	}
-
-    /* chop off zero terms */
-	if(z==(float)0.0) {
-	    jz -= 1; q0 -= 8;
-	    while(iq[jz]==0) { jz--; q0-=8;}
-	} else { /* break z into 8-bit if necessary */
-	    z = scalbnf(z,-(int)q0);
-	    if(z>=two8) { 
-		fw = (float)((__int32_t)(twon8*z));
-		iq[jz] = (__int32_t)(z-two8*fw);
-		jz += 1; q0 += 8;
-		iq[jz] = (__int32_t) fw;
-	    } else iq[jz] = (__int32_t) z ;
-	}
-
-    /* convert integer "bit" chunk to floating-point value */
-	fw = scalbnf(one,(int)q0);
-	for(i=jz;i>=0;i--) {
-	    q[i] = fw*(float)iq[i]; fw*=twon8;
-	}
-
-    /* compute PIo2[0,...,jp]*q[jz,...,0] */
-	for(i=jz;i>=0;i--) {
-	    for(fw=0.0,k=0;k<=jp&&k<=jz-i;k++) fw += PIo2[k]*q[i+k];
-	    fq[jz-i] = fw;
-	}
-
-    /* compress fq[] into y[] */
-	switch(prec) {
-	    case 0:
-		fw = 0.0;
-		for (i=jz;i>=0;i--) fw += fq[i];
-		y[0] = (ih==0)? fw: -fw; 
-		break;
-	    case 1:
-	    case 2:
-		fw = 0.0;
-		for (i=jz;i>=0;i--) fw += fq[i]; 
-		y[0] = (ih==0)? fw: -fw; 
-		fw = fq[0]-fw;
-		for (i=1;i<=jz;i++) fw += fq[i];
-		y[1] = (ih==0)? fw: -fw; 
-		break;
-	    case 3:	/* painful */
-		for (i=jz;i>0;i--) {
-		    fw      = fq[i-1]+fq[i]; 
-		    fq[i]  += fq[i-1]-fw;
-		    fq[i-1] = fw;
-		}
-		for (i=jz;i>1;i--) {
-		    fw      = fq[i-1]+fq[i]; 
-		    fq[i]  += fq[i-1]-fw;
-		    fq[i-1] = fw;
-		}
-		for (fw=0.0,i=jz;i>=2;i--) fw += fq[i]; 
-		if(ih==0) {
-		    y[0] =  fq[0]; y[1] =  fq[1]; y[2] =  fw;
-		} else {
-		    y[0] = -fq[0]; y[1] = -fq[1]; y[2] = -fw;
-		}
-	}
-	return n&7;
-}
diff --git a/newlib/libm/math/kf_sin.c b/newlib/libm/math/kf_sin.c
deleted file mode 100644
index e81fa0bd8..000000000
--- a/newlib/libm/math/kf_sin.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* kf_sin.c -- float version of k_sin.c
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-half =  5.0000000000e-01,/* 0x3f000000 */
-S1  = -1.6666667163e-01, /* 0xbe2aaaab */
-S2  =  8.3333337680e-03, /* 0x3c088889 */
-S3  = -1.9841270114e-04, /* 0xb9500d01 */
-S4  =  2.7557314297e-06, /* 0x3638ef1b */
-S5  = -2.5050759689e-08, /* 0xb2d72f34 */
-S6  =  1.5896910177e-10; /* 0x2f2ec9d3 */
-
-#ifdef __STDC__
-	float __kernel_sinf(float x, float y, int iy)
-#else
-	float __kernel_sinf(x, y, iy)
-	float x,y; int iy;		/* iy=0 if y is zero */
-#endif
-{
-	float z,r,v;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;			/* high word of x */
-	if(ix<0x32000000)			/* |x| < 2**-27 */
-	   {if((int)x==0) return x;}		/* generate inexact */
-	z	=  x*x;
-	v	=  z*x;
-	r	=  S2+z*(S3+z*(S4+z*(S5+z*S6)));
-	if(iy==0) return x+v*(S1+z*r);
-	else      return x-((z*(half*y-v*r)-y)-v*S1);
-}
diff --git a/newlib/libm/math/kf_tan.c b/newlib/libm/math/kf_tan.c
deleted file mode 100644
index 285d7f647..000000000
--- a/newlib/libm/math/kf_tan.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* kf_tan.c -- float version of k_tan.c
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one   =  1.0000000000e+00, /* 0x3f800000 */
-pio4  =  7.8539812565e-01, /* 0x3f490fda */
-pio4lo=  3.7748947079e-08, /* 0x33222168 */
-T[] =  {
-  3.3333334327e-01, /* 0x3eaaaaab */
-  1.3333334029e-01, /* 0x3e088889 */
-  5.3968254477e-02, /* 0x3d5d0dd1 */
-  2.1869488060e-02, /* 0x3cb327a4 */
-  8.8632395491e-03, /* 0x3c11371f */
-  3.5920790397e-03, /* 0x3b6b6916 */
-  1.4562094584e-03, /* 0x3abede48 */
-  5.8804126456e-04, /* 0x3a1a26c8 */
-  2.4646313977e-04, /* 0x398137b9 */
-  7.8179444245e-05, /* 0x38a3f445 */
-  7.1407252108e-05, /* 0x3895c07a */
- -1.8558637748e-05, /* 0xb79bae5f */
-  2.5907305826e-05, /* 0x37d95384 */
-};
-
-#ifdef __STDC__
-	float __kernel_tanf(float x, float y, int iy)
-#else
-	float __kernel_tanf(x, y, iy)
-	float x,y; int iy;
-#endif
-{
-	float z,r,v,w,s;
-	__int32_t ix,hx;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;	/* high word of |x| */
-	if(ix<0x31800000)			/* x < 2**-28 */
-	    {if((int)x==0) {			/* generate inexact */
-		if((ix|(iy+1))==0) return one/fabsf(x);
-		else return (iy==1)? x: -one/x;
-	    }
-	    }
-	if(ix>=0x3f2ca140) { 			/* |x|>=0.6744 */
-	    if(hx<0) {x = -x; y = -y;}
-	    z = pio4-x;
-	    w = pio4lo-y;
-	    x = z+w; y = 0.0;
-	}
-	z	=  x*x;
-	w 	=  z*z;
-    /* Break x^5*(T[1]+x^2*T[2]+...) into
-     *	  x^5(T[1]+x^4*T[3]+...+x^20*T[11]) +
-     *	  x^5(x^2*(T[2]+x^4*T[4]+...+x^22*[T12]))
-     */
-	r = T[1]+w*(T[3]+w*(T[5]+w*(T[7]+w*(T[9]+w*T[11]))));
-	v = z*(T[2]+w*(T[4]+w*(T[6]+w*(T[8]+w*(T[10]+w*T[12])))));
-	s = z*x;
-	r = y + z*(s*(r+v)+y);
-	r += T[0]*s;
-	w = x+r;
-	if(ix>=0x3f2ca140) {
-	    v = (float)iy;
-	    return (float)(1-((hx>>30)&2))*(v-(float)2.0*(x-(w*w/(w+v)-r)));
-	}
-	if(iy==1) return w;
-	else {		/* if allow error up to 2 ulp, 
-			   simply return -1.0/(x+r) here */
-     /*  compute -1.0/(x+r) accurately */
-	    float a,t;
-	    __int32_t i;
-	    z  = w;
-	    GET_FLOAT_WORD(i,z);
-	    SET_FLOAT_WORD(z,i&0xfffff000);
-	    v  = r-(z - x); 	/* z+v = r+x */
-	    t = a  = -(float)1.0/w;	/* a = -1.0/w */
-	    GET_FLOAT_WORD(i,t);
-	    SET_FLOAT_WORD(t,i&0xfffff000);
-	    s  = (float)1.0+t*z;
-	    return t+a*(s+t*v);
-	}
-}
diff --git a/newlib/libm/math/math.tex b/newlib/libm/math/math.tex
deleted file mode 100644
index 0b1e596fb..000000000
--- a/newlib/libm/math/math.tex
+++ /dev/null
@@ -1,199 +0,0 @@
-@node Math
-@chapter Mathematical Functions (@file{math.h})
-
-This chapter groups a wide variety of mathematical functions.  The
-corresponding definitions and declarations are in @file{math.h}.  
-Two definitions from @file{math.h} are of particular interest.  
-
-@enumerate
-@item
-The representation of infinity as a @code{double} is defined as
-@code{HUGE_VAL}; this number is returned on overflow by many functions.
-
-@item
-The structure @code{exception} is used when you write customized error
-handlers for the mathematical functions.  You can customize error
-handling for most of these functions by defining your own version of
-@code{matherr}; see the section on @code{matherr} for details.
-@end enumerate
-
-@cindex system calls
-@cindex support subroutines
-@cindex stubs
-@cindex OS stubs
-Since the error handling code calls @code{fputs}, the mathematical
-subroutines require stubs or minimal implementations for the same list
-of OS subroutines as @code{fputs}: @code{close}, @code{fstat},
-@code{isatty}, @code{lseek}, @code{read}, @code{sbrk}, @code{write}.
-@xref{syscalls,,System Calls, libc.info, The Cygnus C Support Library},
-for a discussion and for sample minimal implementations of these support
-subroutines.
-
-Alternative declarations of the mathematical functions, which exploit
-specific machine capabilities to operate faster---but generally have
-less error checking and may reflect additional limitations on some
-machines---are available when you include @file{fastmath.h} instead of
-@file{math.h}.
-
-@menu 
-* version::	Version of library
-* acos::	Arccosine
-* acosh::	Inverse hyperbolic cosine
-* asin::	Arcsine
-* asinh::	Inverse hyperbolic sine
-* atan::	Arctangent
-* atan2::	Arctangent of y/x
-* atanh::	Inverse hyperbolic tangent
-* jN::	        Bessel functions  (jN, yN)
-* cbrt::	Cube root
-* copysign::	Sign of Y, magnitude of X
-* cosh::	Hyperbolic cosine
-* erf::		Error function  (erf, erfc)
-* exp::		Exponential
-* expm1::	Exponential of x, - 1
-* fabs::	Absolute value (magnitude)
-* floor::	Floor and ceiling  (floor, ceil)
-* fmod::	Floating-point remainder (modulo)
-* frexp::	Split floating-point number
-* gamma::	Logarithmic gamma function
-* hypot::	Distance from origin
-* ilogb::	Get exponent
-* infinity::	Floating infinity
-* isnan::	Check type of number
-* ldexp::	Load exponent
-* log::		Natural logarithms
-* log10::	Base 10 logarithms
-* log1p::	Log of 1 + X
-* matherr::	Modifiable math error handler
-* modf::	Split fractional and integer parts
-* nan::		Floating Not a Number
-* nextafter::	Get next representable number
-* pow::		X to the power Y
-* remainder::	remainder of X divided by Y 
-* scalbn::	scalbn
-* sin::		Sine or cosine (sin, cos)
-* sinh::	Hyperbolic sine
-* sqrt::	Positive square root
-* tan::		Tangent
-* tanh::	Hyperbolic tangent
-@end menu
-
-@page
-@node version
-@section Version of library
-
-There are four different versions of the math library routines: IEEE,
-POSIX, X/Open, or SVID.  The version may be selected at runtime by
-setting the global variable @code{_LIB_VERSION}, defined in
-@file{math.h}.  It may be set to one of the following constants defined
-in @file{math.h}: @code{_IEEE_}, @code{_POSIX_}, @code{_XOPEN_}, or
-@code{_SVID_}.  The @code{_LIB_VERSION} variable is not specific to any
-thread, and changing it will affect all threads.
-
-The versions of the library differ only in how errors are handled.
-
-In IEEE mode, the @code{matherr} function is never called, no warning
-messages are printed, and @code{errno} is never set.
-
-In POSIX mode, @code{errno} is set correctly, but the @code{matherr}
-function is never called and no warning messages are printed.
-
-In X/Open mode, @code{errno} is set correctly, and @code{matherr} is
-called, but warning message are not printed.
-
-In SVID mode, functions which overflow return 3.40282346638528860e+38,
-the maximum single-precision floating-point value, rather than infinity.
-Also, @code{errno} is set correctly, @code{matherr} is called, and, if
-@code{matherr} returns 0, warning messages are printed for some errors.
-For example, by default @samp{log(-1.0)} writes this message on standard
-error output:
-
-@example
-log: DOMAIN error
-@end example
-
-The library is set to X/Open mode by default.
-
-@page
-@include math/wacos.def
-
-@page
-@include math/wacosh.def
-
-@page
-@include math/wasin.def
-
-@page
-@include math/sasinh.def
-
-@page
-@include math/satan.def
-
-@page
-@include math/watan2.def
-
-@page
-@include math/watanh.def
-
-@page
-@include math/wj0.def
-
-@page
-@include math/wcosh.def
-
-@page
-@include math/serf.def
-
-@page
-@include math/wexp.def
-
-@page
-@include math/sfabs.def
-
-@page
-@include math/sfloor.def
-
-@page
-@include math/wfmod.def
-
-@page
-@include math/sfrexp.def
-
-@page
-@include math/wgamma.def
-
-@page
-@include math/whypot.def
-
-@page
-@include math/sisnan.def
-
-@page
-@include math/sldexp.def
-
-@page
-@include math/wlog.def
-
-@page
-@include math/wlog10.def
-
-@page
-@include math/wpow.def
-
-@page
-@include math/wremainder.def
-
-@page
-@include math/wsqrt.def
-
-@page
-@include math/ssin.def
-
-@page
-@include math/wsinh.def
-
-@page
-@include math/stan.def
-
-@page
-@include math/stanh.def
diff --git a/newlib/libm/math/s_asinh.c b/newlib/libm/math/s_asinh.c
deleted file mode 100644
index b7e173c79..000000000
--- a/newlib/libm/math/s_asinh.c
+++ /dev/null
@@ -1,107 +0,0 @@
-
-/* @(#)s_asinh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<asinh>>, <<asinhf>>---inverse hyperbolic sine 
-
-INDEX
-	asinh
-INDEX
-	asinhf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double asinh(double <[x]>);
-	float asinhf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double asinh(<[x]>)
-	double <[x]>;
-
-	float asinhf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-<<asinh>> calculates the inverse hyperbolic sine of <[x]>.
-<<asinh>> is defined as 
-@ifnottex
-. sgn(<[x]>) * log(abs(<[x]>) + sqrt(1+<[x]>*<[x]>))
-@end ifnottex
-@tex
-$$sign(x) \times ln\Bigl(|x| + \sqrt{1+x^2}\Bigr)$$
-@end tex
-
-<<asinhf>> is identical, other than taking and returning floats.
-
-RETURNS
-<<asinh>> and <<asinhf>> return the calculated value.
-
-PORTABILITY
-Neither <<asinh>> nor <<asinhf>> are ANSI C.
-
-*/
-
-/* asinh(x)
- * Method :
- *	Based on 
- *		asinh(x) = sign(x) * log [ |x| + sqrt(x*x+1) ]
- *	we have
- *	asinh(x) := x  if  1+x*x=1,
- *		 := sign(x)*(log(x)+ln2)) for large |x|, else
- *		 := sign(x)*log(2|x|+1/(|x|+sqrt(x*x+1))) if|x|>2, else
- *		 := sign(x)*log1p(|x| + x^2/(1 + sqrt(1+x^2)))  
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-ln2 =  6.93147180559945286227e-01, /* 0x3FE62E42, 0xFEFA39EF */
-huge=  1.00000000000000000000e+300; 
-
-#ifdef __STDC__
-	double asinh(double x)
-#else
-	double asinh(x)
-	double x;
-#endif
-{	
-	double t,w;
-	__int32_t hx,ix;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return x+x;	/* x is inf or NaN */
-	if(ix< 0x3e300000) {	/* |x|<2**-28 */
-	    if(huge+x>one) return x;	/* return x inexact except 0 */
-	} 
-	if(ix>0x41b00000) {	/* |x| > 2**28 */
-	    w = __ieee754_log(fabs(x))+ln2;
-	} else if (ix>0x40000000) {	/* 2**28 > |x| > 2.0 */
-	    t = fabs(x);
-	    w = __ieee754_log(2.0*t+one/(__ieee754_sqrt(x*x+one)+t));
-	} else {		/* 2.0 > |x| > 2**-28 */
-	    t = x*x;
-	    w =log1p(fabs(x)+t/(one+__ieee754_sqrt(one+t)));
-	}
-	if(hx>0) return w; else return -w;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_atan.c b/newlib/libm/math/s_atan.c
deleted file mode 100644
index c52a09dd0..000000000
--- a/newlib/libm/math/s_atan.c
+++ /dev/null
@@ -1,181 +0,0 @@
-
-/* @(#)s_atan.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<atan>>, <<atanf>>---arc tangent
-
-INDEX
-   atan
-INDEX
-   atanf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atan(double <[x]>);
-        float atanf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atan(<[x]>);
-        double <[x]>;
-
-        float atanf(<[x]>);
-        float <[x]>;
-
-DESCRIPTION
-
-<<atan>> computes the inverse tangent (arc tangent) of the input value.
-
-<<atanf>> is identical to <<atan>>, save that it operates on <<floats>>.
-
-RETURNS
-@ifnottex
-<<atan>> returns a value in radians, in the range of -pi/2 to pi/2.
-@end ifnottex
-@tex
-<<atan>> returns a value in radians, in the range of $-\pi/2$ to $\pi/2$.
-@end tex
-
-PORTABILITY
-<<atan>> is ANSI C.  <<atanf>> is an extension.
-
-*/
-
-/* atan(x)
- * Method
- *   1. Reduce x to positive by atan(x) = -atan(-x).
- *   2. According to the integer k=4t+0.25 chopped, t=x, the argument
- *      is further reduced to one of the following intervals and the
- *      arctangent of t is evaluated by the corresponding formula:
- *
- *      [0,7/16]      atan(x) = t-t^3*(a1+t^2*(a2+...(a10+t^2*a11)...)
- *      [7/16,11/16]  atan(x) = atan(1/2) + atan( (t-0.5)/(1+t/2) )
- *      [11/16.19/16] atan(x) = atan( 1 ) + atan( (t-1)/(1+t) )
- *      [19/16,39/16] atan(x) = atan(3/2) + atan( (t-1.5)/(1+1.5t) )
- *      [39/16,INF]   atan(x) = atan(INF) + atan( -1/t )
- *
- * Constants:
- * The hexadecimal values are the intended ones for the following 
- * constants. The decimal values may be used, provided that the 
- * compiler will convert from decimal to binary accurately enough 
- * to produce the hexadecimal values shown.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double atanhi[] = {
-#else
-static double atanhi[] = {
-#endif
-  4.63647609000806093515e-01, /* atan(0.5)hi 0x3FDDAC67, 0x0561BB4F */
-  7.85398163397448278999e-01, /* atan(1.0)hi 0x3FE921FB, 0x54442D18 */
-  9.82793723247329054082e-01, /* atan(1.5)hi 0x3FEF730B, 0xD281F69B */
-  1.57079632679489655800e+00, /* atan(inf)hi 0x3FF921FB, 0x54442D18 */
-};
-
-#ifdef __STDC__
-static const double atanlo[] = {
-#else
-static double atanlo[] = {
-#endif
-  2.26987774529616870924e-17, /* atan(0.5)lo 0x3C7A2B7F, 0x222F65E2 */
-  3.06161699786838301793e-17, /* atan(1.0)lo 0x3C81A626, 0x33145C07 */
-  1.39033110312309984516e-17, /* atan(1.5)lo 0x3C700788, 0x7AF0CBBD */
-  6.12323399573676603587e-17, /* atan(inf)lo 0x3C91A626, 0x33145C07 */
-};
-
-#ifdef __STDC__
-static const double aT[] = {
-#else
-static double aT[] = {
-#endif
-  3.33333333333329318027e-01, /* 0x3FD55555, 0x5555550D */
- -1.99999999998764832476e-01, /* 0xBFC99999, 0x9998EBC4 */
-  1.42857142725034663711e-01, /* 0x3FC24924, 0x920083FF */
- -1.11111104054623557880e-01, /* 0xBFBC71C6, 0xFE231671 */
-  9.09088713343650656196e-02, /* 0x3FB745CD, 0xC54C206E */
- -7.69187620504482999495e-02, /* 0xBFB3B0F2, 0xAF749A6D */
-  6.66107313738753120669e-02, /* 0x3FB10D66, 0xA0D03D51 */
- -5.83357013379057348645e-02, /* 0xBFADDE2D, 0x52DEFD9A */
-  4.97687799461593236017e-02, /* 0x3FA97B4B, 0x24760DEB */
- -3.65315727442169155270e-02, /* 0xBFA2B444, 0x2C6A6C2F */
-  1.62858201153657823623e-02, /* 0x3F90AD3A, 0xE322DA11 */
-};
-
-#ifdef __STDC__
-	static const double 
-#else
-	static double 
-#endif
-one   = 1.0,
-huge   = 1.0e300;
-
-#ifdef __STDC__
-	double atan(double x)
-#else
-	double atan(x)
-	double x;
-#endif
-{
-	double w,s1,s2,z;
-	__int32_t ix,hx,id;
-
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x44100000) {	/* if |x| >= 2^66 */
-	    __uint32_t low;
-	    GET_LOW_WORD(low,x);
-	    if(ix>0x7ff00000||
-		(ix==0x7ff00000&&(low!=0)))
-		return x+x;		/* NaN */
-	    if(hx>0) return  atanhi[3]+atanlo[3];
-	    else     return -atanhi[3]-atanlo[3];
-	} if (ix < 0x3fdc0000) {	/* |x| < 0.4375 */
-	    if (ix < 0x3e200000) {	/* |x| < 2^-29 */
-		if(huge+x>one) return x;	/* raise inexact */
-	    }
-	    id = -1;
-	} else {
-	x = fabs(x);
-	if (ix < 0x3ff30000) {		/* |x| < 1.1875 */
-	    if (ix < 0x3fe60000) {	/* 7/16 <=|x|<11/16 */
-		id = 0; x = (2.0*x-one)/(2.0+x); 
-	    } else {			/* 11/16<=|x|< 19/16 */
-		id = 1; x  = (x-one)/(x+one); 
-	    }
-	} else {
-	    if (ix < 0x40038000) {	/* |x| < 2.4375 */
-		id = 2; x  = (x-1.5)/(one+1.5*x);
-	    } else {			/* 2.4375 <= |x| < 2^66 */
-		id = 3; x  = -1.0/x;
-	    }
-	}}
-    /* end of argument reduction */
-	z = x*x;
-	w = z*z;
-    /* break sum from i=0 to 10 aT[i]z**(i+1) into odd and even poly */
-	s1 = z*(aT[0]+w*(aT[2]+w*(aT[4]+w*(aT[6]+w*(aT[8]+w*aT[10])))));
-	s2 = w*(aT[1]+w*(aT[3]+w*(aT[5]+w*(aT[7]+w*aT[9]))));
-	if (id<0) return x - x*(s1+s2);
-	else {
-	    z = atanhi[id] - ((x*(s1+s2) - atanlo[id]) - x);
-	    return (hx<0)? -z:z;
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_ceil.c b/newlib/libm/math/s_ceil.c
deleted file mode 100644
index 24d69169c..000000000
--- a/newlib/libm/math/s_ceil.c
+++ /dev/null
@@ -1,80 +0,0 @@
-
-/* @(#)s_ceil.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * ceil(x)
- * Return x rounded toward -inf to integral value
- * Method:
- *	Bit twiddling.
- * Exception:
- *	Inexact flag raised if x not equal to ceil(x).
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double huge = 1.0e300;
-#else
-static double huge = 1.0e300;
-#endif
-
-#ifdef __STDC__
-	double ceil(double x)
-#else
-	double ceil(x)
-	double x;
-#endif
-{
-	__int32_t i0,i1,j0;
-	__uint32_t i,j;
-	EXTRACT_WORDS(i0,i1,x);
-	j0 = ((i0>>20)&0x7ff)-0x3ff;
-	if(j0<20) {
-	    if(j0<0) { 	/* raise inexact if x != 0 */
-		if(huge+x>0.0) {/* return 0*sign(x) if |x|<1 */
-		    if(i0<0) {i0=0x80000000;i1=0;} 
-		    else if((i0|i1)!=0) { i0=0x3ff00000;i1=0;}
-		}
-	    } else {
-		i = (0x000fffff)>>j0;
-		if(((i0&i)|i1)==0) return x; /* x is integral */
-		if(huge+x>0.0) {	/* raise inexact flag */
-		    if(i0>0) i0 += (0x00100000)>>j0;
-		    i0 &= (~i); i1=0;
-		}
-	    }
-	} else if (j0>51) {
-	    if(j0==0x400) return x+x;	/* inf or NaN */
-	    else return x;		/* x is integral */
-	} else {
-	    i = ((__uint32_t)(0xffffffff))>>(j0-20);
-	    if((i1&i)==0) return x;	/* x is integral */
-	    if(huge+x>0.0) { 		/* raise inexact flag */
-		if(i0>0) {
-		    if(j0==20) i0+=1; 
-		    else {
-			j = i1 + (1<<(52-j0));
-			if(j<i1) i0+=1;	/* got a carry */
-			i1 = j;
-		    }
-		}
-		i1 &= (~i);
-	    }
-	}
-	INSERT_WORDS(x,i0,i1);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_cos.c b/newlib/libm/math/s_cos.c
deleted file mode 100644
index c47123301..000000000
--- a/newlib/libm/math/s_cos.c
+++ /dev/null
@@ -1,82 +0,0 @@
-
-/* @(#)s_cos.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* cos(x)
- * Return cosine function of x.
- *
- * kernel function:
- *	__kernel_sin		... sine function on [-pi/4,pi/4]
- *	__kernel_cos		... cosine function on [-pi/4,pi/4]
- *	__ieee754_rem_pio2	... argument reduction routine
- *
- * Method.
- *      Let S,C and T denote the sin, cos and tan respectively on 
- *	[-PI/4, +PI/4]. Reduce the argument x to y1+y2 = x-k*pi/2 
- *	in [-pi/4 , +pi/4], and let n = k mod 4.
- *	We have
- *
- *          n        sin(x)      cos(x)        tan(x)
- *     ----------------------------------------------------------
- *	    0	       S	   C		 T
- *	    1	       C	  -S		-1/T
- *	    2	      -S	  -C		 T
- *	    3	      -C	   S		-1/T
- *     ----------------------------------------------------------
- *
- * Special cases:
- *      Let trig be any of sin, cos, or tan.
- *      trig(+-INF)  is NaN, with signals;
- *      trig(NaN)    is that NaN;
- *
- * Accuracy:
- *	TRIG(x) returns trig(x) nearly rounded 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double cos(double x)
-#else
-	double cos(x)
-	double x;
-#endif
-{
-	double y[2],z=0.0;
-	__int32_t n,ix;
-
-    /* High word of x. */
-	GET_HIGH_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3fe921fb) return __kernel_cos(x,z);
-
-    /* cos(Inf or NaN) is NaN */
-	else if (ix>=0x7ff00000) return x-x;
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2(x,y);
-	    switch(n&3) {
-		case 0: return  __kernel_cos(y[0],y[1]);
-		case 1: return -__kernel_sin(y[0],y[1],1);
-		case 2: return -__kernel_cos(y[0],y[1]);
-		default:
-		        return  __kernel_sin(y[0],y[1],1);
-	    }
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_erf.c b/newlib/libm/math/s_erf.c
deleted file mode 100644
index 825309dee..000000000
--- a/newlib/libm/math/s_erf.c
+++ /dev/null
@@ -1,373 +0,0 @@
-
-/* @(#)s_erf.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-        <<erf>>, <<erff>>, <<erfc>>, <<erfcf>>---error function 
-INDEX
-	erf
-INDEX
-	erff
-INDEX
-	erfc
-INDEX
-	erfcf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double erf(double <[x]>);
-	float erff(float <[x]>);
-	double erfc(double <[x]>);
-	float erfcf(float <[x]>);
-TRAD_SYNOPSIS
-	#include <math.h>
-
-	double erf(<[x]>)
-	double <[x]>;
-
-	float erff(<[x]>)
-	float <[x]>;
-
-	double erfc(<[x]>)
-	double <[x]>;
-
-	float erfcf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-	<<erf>> calculates an approximation to the ``error function'',
-	which estimates the probability that an observation will fall within
-	<[x]> standard deviations of the mean (assuming a normal
-	distribution).
-	@tex
-	The error function is defined as
-	$${2\over\sqrt\pi}\times\int_0^x e^{-t^2}dt$$
-	 @end tex
-
-	<<erfc>> calculates the complementary probability; that is,
-	<<erfc(<[x]>)>> is <<1 - erf(<[x]>)>>.  <<erfc>> is computed directly,
-	so that you can use it to avoid the loss of precision that would
-	result from subtracting large probabilities (on large <[x]>) from 1.
-
-	<<erff>> and <<erfcf>> differ from <<erf>> and <<erfc>> only in the
-	argument and result types.
-
-RETURNS
-	For positive arguments, <<erf>> and all its variants return a
-	probability---a number between 0 and 1.
-
-PORTABILITY
-	None of the variants of <<erf>> are ANSI C.
-*/
-
-/* double erf(double x)
- * double erfc(double x)
- *			     x
- *		      2      |\
- *     erf(x)  =  ---------  | exp(-t*t)dt
- *	 	   sqrt(pi) \| 
- *			     0
- *
- *     erfc(x) =  1-erf(x)
- *  Note that 
- *		erf(-x) = -erf(x)
- *		erfc(-x) = 2 - erfc(x)
- *
- * Method:
- *	1. For |x| in [0, 0.84375]
- *	    erf(x)  = x + x*R(x^2)
- *          erfc(x) = 1 - erf(x)           if x in [-.84375,0.25]
- *                  = 0.5 + ((0.5-x)-x*R)  if x in [0.25,0.84375]
- *	   where R = P/Q where P is an odd poly of degree 8 and
- *	   Q is an odd poly of degree 10.
- *						 -57.90
- *			| R - (erf(x)-x)/x | <= 2
- *	
- *
- *	   Remark. The formula is derived by noting
- *          erf(x) = (2/sqrt(pi))*(x - x^3/3 + x^5/10 - x^7/42 + ....)
- *	   and that
- *          2/sqrt(pi) = 1.128379167095512573896158903121545171688
- *	   is close to one. The interval is chosen because the fix
- *	   point of erf(x) is near 0.6174 (i.e., erf(x)=x when x is
- *	   near 0.6174), and by some experiment, 0.84375 is chosen to
- * 	   guarantee the error is less than one ulp for erf.
- *
- *      2. For |x| in [0.84375,1.25], let s = |x| - 1, and
- *         c = 0.84506291151 rounded to single (24 bits)
- *         	erf(x)  = sign(x) * (c  + P1(s)/Q1(s))
- *         	erfc(x) = (1-c)  - P1(s)/Q1(s) if x > 0
- *			  1+(c+P1(s)/Q1(s))    if x < 0
- *         	|P1/Q1 - (erf(|x|)-c)| <= 2**-59.06
- *	   Remark: here we use the taylor series expansion at x=1.
- *		erf(1+s) = erf(1) + s*Poly(s)
- *			 = 0.845.. + P1(s)/Q1(s)
- *	   That is, we use rational approximation to approximate
- *			erf(1+s) - (c = (single)0.84506291151)
- *	   Note that |P1/Q1|< 0.078 for x in [0.84375,1.25]
- *	   where 
- *		P1(s) = degree 6 poly in s
- *		Q1(s) = degree 6 poly in s
- *
- *      3. For x in [1.25,1/0.35(~2.857143)], 
- *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R1/S1)
- *         	erf(x)  = 1 - erfc(x)
- *	   where 
- *		R1(z) = degree 7 poly in z, (z=1/x^2)
- *		S1(z) = degree 8 poly in z
- *
- *      4. For x in [1/0.35,28]
- *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R2/S2) if x > 0
- *			= 2.0 - (1/x)*exp(-x*x-0.5625+R2/S2) if -6<x<0
- *			= 2.0 - tiny		(if x <= -6)
- *         	erf(x)  = sign(x)*(1.0 - erfc(x)) if x < 6, else
- *         	erf(x)  = sign(x)*(1.0 - tiny)
- *	   where
- *		R2(z) = degree 6 poly in z, (z=1/x^2)
- *		S2(z) = degree 7 poly in z
- *
- *      Note1:
- *	   To compute exp(-x*x-0.5625+R/S), let s be a single
- *	   precision number and s := x; then
- *		-x*x = -s*s + (s-x)*(s+x)
- *	        exp(-x*x-0.5626+R/S) = 
- *			exp(-s*s-0.5625)*exp((s-x)*(s+x)+R/S);
- *      Note2:
- *	   Here 4 and 5 make use of the asymptotic series
- *			  exp(-x*x)
- *		erfc(x) ~ ---------- * ( 1 + Poly(1/x^2) )
- *			  x*sqrt(pi)
- *	   We use rational approximation to approximate
- *      	g(s)=f(1/x^2) = log(erfc(x)*x) - x*x + 0.5625
- *	   Here is the error bound for R1/S1 and R2/S2
- *      	|R1/S1 - f(x)|  < 2**(-62.57)
- *      	|R2/S2 - f(x)|  < 2**(-61.52)
- *
- *      5. For inf > x >= 28
- *         	erf(x)  = sign(x) *(1 - tiny)  (raise inexact)
- *         	erfc(x) = tiny*tiny (raise underflow) if x > 0
- *			= 2 - tiny if x<0
- *
- *      7. Special case:
- *         	erf(0)  = 0, erf(inf)  = 1, erf(-inf) = -1,
- *         	erfc(0) = 1, erfc(inf) = 0, erfc(-inf) = 2, 
- *	   	erfc/erf(NaN) is NaN
- */
-
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-tiny	    = 1e-300,
-half=  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-two =  2.00000000000000000000e+00, /* 0x40000000, 0x00000000 */
-	/* c = (float)0.84506291151 */
-erx =  8.45062911510467529297e-01, /* 0x3FEB0AC1, 0x60000000 */
-/*
- * Coefficients for approximation to  erf on [0,0.84375]
- */
-efx =  1.28379167095512586316e-01, /* 0x3FC06EBA, 0x8214DB69 */
-efx8=  1.02703333676410069053e+00, /* 0x3FF06EBA, 0x8214DB69 */
-pp0  =  1.28379167095512558561e-01, /* 0x3FC06EBA, 0x8214DB68 */
-pp1  = -3.25042107247001499370e-01, /* 0xBFD4CD7D, 0x691CB913 */
-pp2  = -2.84817495755985104766e-02, /* 0xBF9D2A51, 0xDBD7194F */
-pp3  = -5.77027029648944159157e-03, /* 0xBF77A291, 0x236668E4 */
-pp4  = -2.37630166566501626084e-05, /* 0xBEF8EAD6, 0x120016AC */
-qq1  =  3.97917223959155352819e-01, /* 0x3FD97779, 0xCDDADC09 */
-qq2  =  6.50222499887672944485e-02, /* 0x3FB0A54C, 0x5536CEBA */
-qq3  =  5.08130628187576562776e-03, /* 0x3F74D022, 0xC4D36B0F */
-qq4  =  1.32494738004321644526e-04, /* 0x3F215DC9, 0x221C1A10 */
-qq5  = -3.96022827877536812320e-06, /* 0xBED09C43, 0x42A26120 */
-/*
- * Coefficients for approximation to  erf  in [0.84375,1.25] 
- */
-pa0  = -2.36211856075265944077e-03, /* 0xBF6359B8, 0xBEF77538 */
-pa1  =  4.14856118683748331666e-01, /* 0x3FDA8D00, 0xAD92B34D */
-pa2  = -3.72207876035701323847e-01, /* 0xBFD7D240, 0xFBB8C3F1 */
-pa3  =  3.18346619901161753674e-01, /* 0x3FD45FCA, 0x805120E4 */
-pa4  = -1.10894694282396677476e-01, /* 0xBFBC6398, 0x3D3E28EC */
-pa5  =  3.54783043256182359371e-02, /* 0x3FA22A36, 0x599795EB */
-pa6  = -2.16637559486879084300e-03, /* 0xBF61BF38, 0x0A96073F */
-qa1  =  1.06420880400844228286e-01, /* 0x3FBB3E66, 0x18EEE323 */
-qa2  =  5.40397917702171048937e-01, /* 0x3FE14AF0, 0x92EB6F33 */
-qa3  =  7.18286544141962662868e-02, /* 0x3FB2635C, 0xD99FE9A7 */
-qa4  =  1.26171219808761642112e-01, /* 0x3FC02660, 0xE763351F */
-qa5  =  1.36370839120290507362e-02, /* 0x3F8BEDC2, 0x6B51DD1C */
-qa6  =  1.19844998467991074170e-02, /* 0x3F888B54, 0x5735151D */
-/*
- * Coefficients for approximation to  erfc in [1.25,1/0.35]
- */
-ra0  = -9.86494403484714822705e-03, /* 0xBF843412, 0x600D6435 */
-ra1  = -6.93858572707181764372e-01, /* 0xBFE63416, 0xE4BA7360 */
-ra2  = -1.05586262253232909814e+01, /* 0xC0251E04, 0x41B0E726 */
-ra3  = -6.23753324503260060396e+01, /* 0xC04F300A, 0xE4CBA38D */
-ra4  = -1.62396669462573470355e+02, /* 0xC0644CB1, 0x84282266 */
-ra5  = -1.84605092906711035994e+02, /* 0xC067135C, 0xEBCCABB2 */
-ra6  = -8.12874355063065934246e+01, /* 0xC0545265, 0x57E4D2F2 */
-ra7  = -9.81432934416914548592e+00, /* 0xC023A0EF, 0xC69AC25C */
-sa1  =  1.96512716674392571292e+01, /* 0x4033A6B9, 0xBD707687 */
-sa2  =  1.37657754143519042600e+02, /* 0x4061350C, 0x526AE721 */
-sa3  =  4.34565877475229228821e+02, /* 0x407B290D, 0xD58A1A71 */
-sa4  =  6.45387271733267880336e+02, /* 0x40842B19, 0x21EC2868 */
-sa5  =  4.29008140027567833386e+02, /* 0x407AD021, 0x57700314 */
-sa6  =  1.08635005541779435134e+02, /* 0x405B28A3, 0xEE48AE2C */
-sa7  =  6.57024977031928170135e+00, /* 0x401A47EF, 0x8E484A93 */
-sa8  = -6.04244152148580987438e-02, /* 0xBFAEEFF2, 0xEE749A62 */
-/*
- * Coefficients for approximation to  erfc in [1/.35,28]
- */
-rb0  = -9.86494292470009928597e-03, /* 0xBF843412, 0x39E86F4A */
-rb1  = -7.99283237680523006574e-01, /* 0xBFE993BA, 0x70C285DE */
-rb2  = -1.77579549177547519889e+01, /* 0xC031C209, 0x555F995A */
-rb3  = -1.60636384855821916062e+02, /* 0xC064145D, 0x43C5ED98 */
-rb4  = -6.37566443368389627722e+02, /* 0xC083EC88, 0x1375F228 */
-rb5  = -1.02509513161107724954e+03, /* 0xC0900461, 0x6A2E5992 */
-rb6  = -4.83519191608651397019e+02, /* 0xC07E384E, 0x9BDC383F */
-sb1  =  3.03380607434824582924e+01, /* 0x403E568B, 0x261D5190 */
-sb2  =  3.25792512996573918826e+02, /* 0x40745CAE, 0x221B9F0A */
-sb3  =  1.53672958608443695994e+03, /* 0x409802EB, 0x189D5118 */
-sb4  =  3.19985821950859553908e+03, /* 0x40A8FFB7, 0x688C246A */
-sb5  =  2.55305040643316442583e+03, /* 0x40A3F219, 0xCEDF3BE6 */
-sb6  =  4.74528541206955367215e+02, /* 0x407DA874, 0xE79FE763 */
-sb7  = -2.24409524465858183362e+01; /* 0xC03670E2, 0x42712D62 */
-
-#ifdef __STDC__
-	double erf(double x) 
-#else
-	double erf(x) 
-	double x;
-#endif
-{
-	__int32_t hx,ix,i;
-	double R,S,P,Q,s,y,z,r;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) {		/* erf(nan)=nan */
-	    i = ((__uint32_t)hx>>31)<<1;
-	    return (double)(1-i)+one/x;	/* erf(+-inf)=+-1 */
-	}
-
-	if(ix < 0x3feb0000) {		/* |x|<0.84375 */
-	    if(ix < 0x3e300000) { 	/* |x|<2**-28 */
-	        if (ix < 0x00800000) 
-		    return 0.125*(8.0*x+efx8*x);  /*avoid underflow */
-		return x + efx*x;
-	    }
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    return x + x*y;
-	}
-	if(ix < 0x3ff40000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabs(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) return erx + P/Q; else return -erx - P/Q;
-	}
-	if (ix >= 0x40180000) {		/* inf>|x|>=6 */
-	    if(hx>=0) return one-tiny; else return tiny-one;
-	}
-	x = fabs(x);
- 	s = one/(x*x);
-	if(ix< 0x4006DB6E) {	/* |x| < 1/0.35 */
-	    R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	    S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	} else {	/* |x| >= 1/0.35 */
-	    R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	    S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	}
-	z  = x;  
-	SET_LOW_WORD(z,0);
-	r  =  __ieee754_exp(-z*z-0.5625)*__ieee754_exp((z-x)*(z+x)+R/S);
-	if(hx>=0) return one-r/x; else return  r/x-one;
-}
-
-#ifdef __STDC__
-	double erfc(double x) 
-#else
-	double erfc(x) 
-	double x;
-#endif
-{
-	__int32_t hx,ix;
-	double R,S,P,Q,s,y,z,r;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) {			/* erfc(nan)=nan */
-						/* erfc(+-inf)=0,2 */
-	    return (double)(((__uint32_t)hx>>31)<<1)+one/x;
-	}
-
-	if(ix < 0x3feb0000) {		/* |x|<0.84375 */
-	    if(ix < 0x3c700000)  	/* |x|<2**-56 */
-		return one-x;
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    if(hx < 0x3fd00000) {  	/* x<1/4 */
-		return one-(x+x*y);
-	    } else {
-		r = x*y;
-		r += (x-half);
-	        return half - r ;
-	    }
-	}
-	if(ix < 0x3ff40000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabs(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) {
-	        z  = one-erx; return z - P/Q; 
-	    } else {
-		z = erx+P/Q; return one+z;
-	    }
-	}
-	if (ix < 0x403c0000) {		/* |x|<28 */
-	    x = fabs(x);
- 	    s = one/(x*x);
-	    if(ix< 0x4006DB6D) {	/* |x| < 1/.35 ~ 2.857143*/
-	        R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	        S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	    } else {			/* |x| >= 1/.35 ~ 2.857143 */
-		if(hx<0&&ix>=0x40180000) return two-tiny;/* x < -6 */
-	        R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	        S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	    }
-	    z  = x;
-	    SET_LOW_WORD(z,0);
-	    r  =  __ieee754_exp(-z*z-0.5625)*
-			__ieee754_exp((z-x)*(z+x)+R/S);
-	    if(hx>0) return r/x; else return two-r/x;
-	} else {
-	    if(hx>0) return tiny*tiny; else return two-tiny;
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_fabs.c b/newlib/libm/math/s_fabs.c
deleted file mode 100644
index 95b871ca5..000000000
--- a/newlib/libm/math/s_fabs.c
+++ /dev/null
@@ -1,73 +0,0 @@
-
-/* @(#)s_fabs.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<fabs>>, <<fabsf>>---absolute value (magnitude)
-INDEX
-	fabs
-INDEX
-	fabsf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-       double fabs(double <[x]>);
-       float fabsf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-       double fabs(<[x]>) 
-       double <[x]>;
-
-       float fabsf(<[x]>)
-       float <[x]>;
-
-DESCRIPTION
-<<fabs>> and <<fabsf>> calculate 
-@tex
-$|x|$, 
-@end tex
-the absolute value (magnitude) of the argument <[x]>, by direct
-manipulation of the bit representation of <[x]>.
-
-RETURNS
-The calculated value is returned.  No errors are detected.
-
-PORTABILITY
-<<fabs>> is ANSI.
-<<fabsf>> is an extension.
-
-*/
-
-/*
- * fabs(x) returns the absolute value of x.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fabs(double x)
-#else
-	double fabs(x)
-	double x;
-#endif
-{
-	__uint32_t high;
-	GET_HIGH_WORD(high,x);
-	SET_HIGH_WORD(x,high&0x7fffffff);
-        return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_floor.c b/newlib/libm/math/s_floor.c
deleted file mode 100644
index 65e234ed2..000000000
--- a/newlib/libm/math/s_floor.c
+++ /dev/null
@@ -1,134 +0,0 @@
-
-/* @(#)s_floor.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<floor>>, <<floorf>>, <<ceil>>, <<ceilf>>---floor and ceiling
-INDEX
-	floor
-INDEX
-	floorf
-INDEX
-	ceil
-INDEX
-	ceilf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double floor(double <[x]>);
-        float floorf(float <[x]>);
-        double ceil(double <[x]>);
-        float ceilf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-        double floor(<[x]>)
-	double <[x]>;
-        float floorf(<[x]>) 
-	float <[x]>;
-        double ceil(<[x]>) 
-	double <[x]>;
-        float ceilf(<[x]>) 
-	float <[x]>;
-
-DESCRIPTION
-<<floor>> and <<floorf>> find 
-@tex
-$\lfloor x \rfloor$, 
-@end tex
-the nearest integer less than or equal to <[x]>.
-<<ceil>> and <<ceilf>> find 
-@tex
-$\lceil x\rceil$,
-@end tex
-the nearest integer greater than or equal to <[x]>.
-
-RETURNS
-<<floor>> and <<ceil>> return the integer result as a double.
-<<floorf>> and <<ceilf>> return the integer result as a float.
-
-PORTABILITY
-<<floor>> and <<ceil>> are ANSI.
-<<floorf>> and <<ceilf>> are extensions.
-
-
-*/
-
-/*
- * floor(x)
- * Return x rounded toward -inf to integral value
- * Method:
- *	Bit twiddling.
- * Exception:
- *	Inexact flag raised if x not equal to floor(x).
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double huge = 1.0e300;
-#else
-static double huge = 1.0e300;
-#endif
-
-#ifdef __STDC__
-	double floor(double x)
-#else
-	double floor(x)
-	double x;
-#endif
-{
-	__int32_t i0,i1,j0;
-	__uint32_t i,j;
-	EXTRACT_WORDS(i0,i1,x);
-	j0 = ((i0>>20)&0x7ff)-0x3ff;
-	if(j0<20) {
-	    if(j0<0) { 	/* raise inexact if x != 0 */
-		if(huge+x>0.0) {/* return 0*sign(x) if |x|<1 */
-		    if(i0>=0) {i0=i1=0;} 
-		    else if(((i0&0x7fffffff)|i1)!=0)
-			{ i0=0xbff00000;i1=0;}
-		}
-	    } else {
-		i = (0x000fffff)>>j0;
-		if(((i0&i)|i1)==0) return x; /* x is integral */
-		if(huge+x>0.0) {	/* raise inexact flag */
-		    if(i0<0) i0 += (0x00100000)>>j0;
-		    i0 &= (~i); i1=0;
-		}
-	    }
-	} else if (j0>51) {
-	    if(j0==0x400) return x+x;	/* inf or NaN */
-	    else return x;		/* x is integral */
-	} else {
-	    i = ((__uint32_t)(0xffffffff))>>(j0-20);
-	    if((i1&i)==0) return x;	/* x is integral */
-	    if(huge+x>0.0) { 		/* raise inexact flag */
-		if(i0<0) {
-		    if(j0==20) i0+=1; 
-		    else {
-			j = i1+(1<<(52-j0));
-			if(j<i1) i0 +=1 ; 	/* got a carry */
-			i1=j;
-		    }
-		}
-		i1 &= (~i);
-	    }
-	}
-	INSERT_WORDS(x,i0,i1);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_frexp.c b/newlib/libm/math/s_frexp.c
deleted file mode 100644
index 5a396c7a1..000000000
--- a/newlib/libm/math/s_frexp.c
+++ /dev/null
@@ -1,114 +0,0 @@
-
-/* @(#)s_frexp.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<frexp>>, <<frexpf>>---split floating-point number
-INDEX
-	frexp
-INDEX
-	frexpf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-        double frexp(double <[val]>, int *<[exp]>);
-        float frexpf(float <[val]>, int *<[exp]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-        double frexp(<[val]>, <[exp]>)
-        double <[val]>;
-        int *<[exp]>;
-
-        float frexpf(<[val]>, <[exp]>)
-        float <[val]>;
-        int *<[exp]>;
-
-
-DESCRIPTION
-	All nonzero, normal numbers can be described as <[m]> * 2**<[p]>.
-	<<frexp>> represents the double <[val]> as a mantissa <[m]>
-	and a power of two <[p]>. The resulting mantissa will always
-	be greater than or equal to <<0.5>>, and less than <<1.0>> (as
-	long as <[val]> is nonzero). The power of two will be stored
-	in <<*>><[exp]>. 
-
-@ifnottex
-<[m]> and <[p]> are calculated so that
-<[val]> is <[m]> times <<2>> to the power <[p]>.
-@end ifnottex
-@tex
-<[m]> and <[p]> are calculated so that
-$ val = m \times 2^p $.
-@end tex
-
-<<frexpf>> is identical, other than taking and returning
-floats rather than doubles.
-
-RETURNS
-<<frexp>> returns the mantissa <[m]>. If <[val]> is <<0>>, infinity,
-or Nan, <<frexp>> will set <<*>><[exp]> to <<0>> and return <[val]>.
-
-PORTABILITY
-<<frexp>> is ANSI.
-<<frexpf>> is an extension.
-
-
-*/
-
-/*
- * for non-zero x 
- *	x = frexp(arg,&exp);
- * return a double fp quantity x such that 0.5 <= |x| <1.0
- * and the corresponding binary exponent "exp". That is
- *	arg = x*2^exp.
- * If arg is inf, 0.0, or NaN, then frexp(arg,&exp) returns arg 
- * with *exp=0. 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-two54 =  1.80143985094819840000e+16; /* 0x43500000, 0x00000000 */
-
-#ifdef __STDC__
-	double frexp(double x, int *eptr)
-#else
-	double frexp(x, eptr)
-	double x; int *eptr;
-#endif
-{
-	__int32_t hx, ix, lx;
-	EXTRACT_WORDS(hx,lx,x);
-	ix = 0x7fffffff&hx;
-	*eptr = 0;
-	if(ix>=0x7ff00000||((ix|lx)==0)) return x;	/* 0,inf,nan */
-	if (ix<0x00100000) {		/* subnormal */
-	    x *= two54;
-	    GET_HIGH_WORD(hx,x);
-	    ix = hx&0x7fffffff;
-	    *eptr = -54;
-	}
-	*eptr += (ix>>20)-1022;
-	hx = (hx&0x800fffff)|0x3fe00000;
-	SET_HIGH_WORD(x,hx);
-	return x;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_infconst.c b/newlib/libm/math/s_infconst.c
deleted file mode 100644
index 6b63afbca..000000000
--- a/newlib/libm/math/s_infconst.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Infinity as a constant value.   This is used for HUGE_VAL.
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-#ifdef __IEEE_BIG_ENDIAN
-const union __dmath __infinity[1] = {{{ 0x7ff00000, 0 }}};
-#else
-const union __dmath __infinity[1] = {{{ 0, 0x7ff00000 }}};
-#endif
-#else /* defined (_DOUBLE_IS_32BITS) */
-const union __dmath __infinity[1] = {{{ 0x7f800000, 0 }}};
-#endif /* defined (_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/s_isinf.c b/newlib/libm/math/s_isinf.c
deleted file mode 100644
index 87f099566..000000000
--- a/newlib/libm/math/s_isinf.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * isinf(x) returns 1 if x is infinity, else 0;
- * no branching!
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int isinf(double x)
-#else
-	int isinf(x)
-	double x;
-#endif
-{
-	__int32_t hx,lx;
-	EXTRACT_WORDS(hx,lx,x);
-	hx &= 0x7fffffff;
-	hx |= (__uint32_t)(lx|(-lx))>>31;	
-	hx = 0x7ff00000 - hx;
-	return 1 - (int)((__uint32_t)(hx|(-hx))>>31);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_isnan.c b/newlib/libm/math/s_isnan.c
deleted file mode 100644
index 0338cfe47..000000000
--- a/newlib/libm/math/s_isnan.c
+++ /dev/null
@@ -1,122 +0,0 @@
-
-/* @(#)s_isnan.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<isnan>>,<<isnanf>>,<<isinf>>,<<isinff>>,<<finite>>,<<finitef>>---test for exceptional numbers
-
-INDEX
-	isnan
-INDEX
-	isinf
-INDEX
-	finite
-
-INDEX
-	isnanf
-INDEX
-	isinff
-INDEX
-	finitef
-
-ANSI_SYNOPSIS
-	#include <ieeefp.h>
-	int isnan(double <[arg]>);
-	int isinf(double <[arg]>);
-	int finite(double <[arg]>);
-	int isnanf(float <[arg]>);
-	int isinff(float <[arg]>);
-	int finitef(float <[arg]>);
-
-TRAD_SYNOPSIS
-	#include <ieeefp.h>
-	int isnan(<[arg]>)
-	double <[arg]>;
-	int isinf(<[arg]>)
-	double <[arg]>;
-	int finite(<[arg]>);
-	double <[arg]>;
-	int isnanf(<[arg]>);
-	float <[arg]>;
-	int isinff(<[arg]>);
-	float <[arg]>;
-	int finitef(<[arg]>);
-	float <[arg]>;
-
-
-DESCRIPTION
-	These functions provide information on the floating-point
-	argument supplied.
-
-	There are five major number formats - 
-	o+
-	o zero
-	 a number which contains all zero bits.
-	o subnormal
-	 Is used to represent  number with a zero exponent, but a nonzero fraction.
-	 o normal
-	  A number with an exponent, and a fraction
-     	o infinity
-	  A number with an all 1's exponent and a zero fraction.
-	o NAN
-	  A number with an all 1's exponent and a nonzero fraction.
-
-	o-
-
-	<<isnan>> returns 1 if the argument is a nan. <<isinf>>
-	returns 1 if the argument is infinity.  <<finite>> returns 1 if the
-	argument is zero, subnormal or normal.
-	
-	The <<isnanf>>, <<isinff>> and <<finitef>> perform the same
-	operations as their <<isnan>>, <<isinf>> and <<finite>>
-	counterparts, but on single-precision floating-point numbers.
-
-QUICKREF
-	isnan - pure
-QUICKREF
-	isinf - pure
-QUICKREF
-	finite - pure
-QUICKREF
-	isnan - pure
-QUICKREF
-	isinf - pure
-QUICKREF
-	finite - pure
-*/
-
-/*
- * isnan(x) returns 1 is x is nan, else 0;
- * no branching!
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int isnan(double x)
-#else
-	int isnan(x)
-	double x;
-#endif
-{
-	__int32_t hx,lx;
-	EXTRACT_WORDS(hx,lx,x);
-	hx &= 0x7fffffff;
-	hx |= (__uint32_t)(lx|(-lx))>>31;	
-	hx = 0x7ff00000 - hx;
-	return (int)(((__uint32_t)(hx))>>31);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_ldexp.c b/newlib/libm/math/s_ldexp.c
deleted file mode 100644
index e5d45633d..000000000
--- a/newlib/libm/math/s_ldexp.c
+++ /dev/null
@@ -1,81 +0,0 @@
-
-/* @(#)s_ldexp.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<ldexp>>, <<ldexpf>>---load exponent
-
-INDEX
-	ldexp
-INDEX
-	ldexpf
-
-ANSI_SYNOPSIS
-       #include <math.h>
-       double ldexp(double <[val]>, int <[exp]>);
-       float ldexpf(float <[val]>, int <[exp]>);
-
-TRAD_SYNOPSIS
-       #include <math.h>
-
-       double ldexp(<[val]>, <[exp]>)
-              double <[val]>;
-              int <[exp]>;
-
-       float ldexpf(<[val]>, <[exp]>)
-              float <[val]>;
-              int <[exp]>;
-
-
-DESCRIPTION
-<<ldexp>> calculates the value 
-@ifnottex
-<[val]> times 2 to the power <[exp]>.
-@end ifnottex
-@tex
-$val\times 2^{exp}$.
-@end tex
-<<ldexpf>> is identical, save that it takes and returns <<float>>
-rather than <<double>> values.
-
-RETURNS
-<<ldexp>> returns the calculated value.
-
-Underflow and overflow both set <<errno>> to <<ERANGE>>.
-On underflow, <<ldexp>> and <<ldexpf>> return 0.0.
-On overflow, <<ldexp>> returns plus or minus <<HUGE_VAL>>.
-
-PORTABILITY
-<<ldexp>> is ANSI, <<ldexpf>> is an extension.
-              
-*/   
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double ldexp(double value, int exp)
-#else
-	double ldexp(value, exp)
-	double value; int exp;
-#endif
-{
-	if(!finite(value)||value==0.0) return value;
-	value = scalbn(value,exp);
-	if(!finite(value)||value==0.0) errno = ERANGE;
-	return value;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_signif.c b/newlib/libm/math/s_signif.c
deleted file mode 100644
index f68046bdc..000000000
--- a/newlib/libm/math/s_signif.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)s_signif.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * significand(x) computes just
- * 	scalb(x, (double) -ilogb(x)),
- * for exercising the fraction-part(F) IEEE 754-1985 test vector.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double significand(double x)
-#else
-	double significand(x)
-	double x;
-#endif
-{
-	return __ieee754_scalb(x,(double) -ilogb(x));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_sin.c b/newlib/libm/math/s_sin.c
deleted file mode 100644
index 28259f378..000000000
--- a/newlib/libm/math/s_sin.c
+++ /dev/null
@@ -1,132 +0,0 @@
-
-/* @(#)s_sin.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-        <<sin>>, <<sinf>>, <<cos>>, <<cosf>>---sine or cosine
-INDEX
-sin
-INDEX
-sinf
-INDEX
-cos
-INDEX
-cosf
-ANSI_SYNOPSIS
-        #include <math.h>
-        double sin(double <[x]>);
-        float  sinf(float <[x]>);
-        double cos(double <[x]>);
-        float cosf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double sin(<[x]>)
-        double <[x]>;
-        float  sinf(<[x]>)
-        float <[x]>;
-
-        double cos(<[x]>)
-        double <[x]>;
-        float cosf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-	<<sin>> and <<cos>> compute (respectively) the sine and cosine
-	of the argument <[x]>.  Angles are specified in radians. 
-
-	<<sinf>> and <<cosf>> are identical, save that they take and
-	return <<float>> values. 
-
-
-RETURNS
-	The sine or cosine of <[x]> is returned.
-
-PORTABILITY
-	<<sin>> and <<cos>> are ANSI C. 
-	<<sinf>> and <<cosf>> are extensions.
-
-QUICKREF
-	sin ansi pure
-	sinf - pure
-*/
-
-/* sin(x)
- * Return sine function of x.
- *
- * kernel function:
- *	__kernel_sin		... sine function on [-pi/4,pi/4]
- *	__kernel_cos		... cose function on [-pi/4,pi/4]
- *	__ieee754_rem_pio2	... argument reduction routine
- *
- * Method.
- *      Let S,C and T denote the sin, cos and tan respectively on 
- *	[-PI/4, +PI/4]. Reduce the argument x to y1+y2 = x-k*pi/2 
- *	in [-pi/4 , +pi/4], and let n = k mod 4.
- *	We have
- *
- *          n        sin(x)      cos(x)        tan(x)
- *     ----------------------------------------------------------
- *	    0	       S	   C		 T
- *	    1	       C	  -S		-1/T
- *	    2	      -S	  -C		 T
- *	    3	      -C	   S		-1/T
- *     ----------------------------------------------------------
- *
- * Special cases:
- *      Let trig be any of sin, cos, or tan.
- *      trig(+-INF)  is NaN, with signals;
- *      trig(NaN)    is that NaN;
- *
- * Accuracy:
- *	TRIG(x) returns trig(x) nearly rounded 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sin(double x)
-#else
-	double sin(x)
-	double x;
-#endif
-{
-	double y[2],z=0.0;
-	__int32_t n,ix;
-
-    /* High word of x. */
-	GET_HIGH_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3fe921fb) return __kernel_sin(x,z,0);
-
-    /* sin(Inf or NaN) is NaN */
-	else if (ix>=0x7ff00000) return x-x;
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2(x,y);
-	    switch(n&3) {
-		case 0: return  __kernel_sin(y[0],y[1],1);
-		case 1: return  __kernel_cos(y[0],y[1]);
-		case 2: return -__kernel_sin(y[0],y[1],1);
-		default:
-			return -__kernel_cos(y[0],y[1]);
-	    }
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_tan.c b/newlib/libm/math/s_tan.c
deleted file mode 100644
index 2959f416e..000000000
--- a/newlib/libm/math/s_tan.c
+++ /dev/null
@@ -1,114 +0,0 @@
-
-/* @(#)s_tan.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-
-/*
-
-FUNCTION
-        <<tan>>, <<tanf>>---tangent
-
-INDEX
-tan
-INDEX
-tanf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double tan(double <[x]>);
-        float tanf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double tan(<[x]>)
-        double <[x]>;
-
-        float tanf(<[x]>)
-        float <[x]>;
-
-
-DESCRIPTION
-<<tan>> computes the tangent of the argument <[x]>.  
-Angles are specified in radians.  
-
-<<tanf>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-The tangent of <[x]> is returned. 
-
-PORTABILITY
-<<tan>> is ANSI. <<tanf>> is an extension.
-*/
-
-/* tan(x)
- * Return tangent function of x.
- *
- * kernel function:
- *	__kernel_tan		... tangent function on [-pi/4,pi/4]
- *	__ieee754_rem_pio2	... argument reduction routine
- *
- * Method.
- *      Let S,C and T denote the sin, cos and tan respectively on 
- *	[-PI/4, +PI/4]. Reduce the argument x to y1+y2 = x-k*pi/2 
- *	in [-pi/4 , +pi/4], and let n = k mod 4.
- *	We have
- *
- *          n        sin(x)      cos(x)        tan(x)
- *     ----------------------------------------------------------
- *	    0	       S	   C		 T
- *	    1	       C	  -S		-1/T
- *	    2	      -S	  -C		 T
- *	    3	      -C	   S		-1/T
- *     ----------------------------------------------------------
- *
- * Special cases:
- *      Let trig be any of sin, cos, or tan.
- *      trig(+-INF)  is NaN, with signals;
- *      trig(NaN)    is that NaN;
- *
- * Accuracy:
- *	TRIG(x) returns trig(x) nearly rounded 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double tan(double x)
-#else
-	double tan(x)
-	double x;
-#endif
-{
-	double y[2],z=0.0;
-	__int32_t n,ix;
-
-    /* High word of x. */
-	GET_HIGH_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3fe921fb) return __kernel_tan(x,z,1);
-
-    /* tan(Inf or NaN) is NaN */
-	else if (ix>=0x7ff00000) return x-x;		/* NaN */
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2(x,y);
-	    return __kernel_tan(y[0],y[1],1-((n&1)<<1)); /*   1 -- n even
-							-1 -- n odd */
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/s_tanh.c b/newlib/libm/math/s_tanh.c
deleted file mode 100644
index b5541d028..000000000
--- a/newlib/libm/math/s_tanh.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-/* @(#)s_tanh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-
-FUNCTION
-        <<tanh>>, <<tanhf>>---hyperbolic tangent
-
-INDEX
-tanh
-INDEX
-tanhf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double tanh(double <[x]>);
-        float tanhf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double tanh(<[x]>)
-        double <[x]>;
-
-        float tanhf(<[x]>)
-        float <[x]>;
-
-
-DESCRIPTION
-
-<<tanh>> computes the hyperbolic tangent of
-the argument <[x]>.  Angles are specified in radians.  
-
-<<tanh(<[x]>)>> is defined as 
-. sinh(<[x]>)/cosh(<[x]>)
-	
-<<tanhf>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-The hyperbolic tangent of <[x]> is returned.
-
-PORTABILITY
-<<tanh>> is ANSI C.  <<tanhf>> is an extension.
-
-*/
-
-/* Tanh(x)
- * Return the Hyperbolic Tangent of x
- *
- * Method :
- *				       x    -x
- *				      e  - e
- *	0. tanh(x) is defined to be -----------
- *				       x    -x
- *				      e  + e
- *	1. reduce x to non-negative by tanh(-x) = -tanh(x).
- *	2.  0      <= x <= 2**-55 : tanh(x) := x*(one+x)
- *					        -t
- *	    2**-55 <  x <=  1     : tanh(x) := -----; t = expm1(-2x)
- *					       t + 2
- *						     2
- *	    1      <= x <=  22.0  : tanh(x) := 1-  ----- ; t=expm1(2x)
- *						   t + 2
- *	    22.0   <  x <= INF    : tanh(x) := 1.
- *
- * Special cases:
- *	tanh(NaN) is NaN;
- *	only tanh(0)=0 is exact for finite argument.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one=1.0, two=2.0, tiny = 1.0e-300;
-#else
-static double one=1.0, two=2.0, tiny = 1.0e-300;
-#endif
-
-#ifdef __STDC__
-	double tanh(double x)
-#else
-	double tanh(x)
-	double x;
-#endif
-{
-	double t,z;
-	__int32_t jx,ix;
-
-    /* High word of |x|. */
-	GET_HIGH_WORD(jx,x);
-	ix = jx&0x7fffffff;
-
-    /* x is INF or NaN */
-	if(ix>=0x7ff00000) { 
-	    if (jx>=0) return one/x+one;    /* tanh(+-inf)=+-1 */
-	    else       return one/x-one;    /* tanh(NaN) = NaN */
-	}
-
-    /* |x| < 22 */
-	if (ix < 0x40360000) {		/* |x|<22 */
-	    if (ix<0x3c800000) 		/* |x|<2**-55 */
-		return x*(one+x);    	/* tanh(small) = small */
-	    if (ix>=0x3ff00000) {	/* |x|>=1  */
-		t = expm1(two*fabs(x));
-		z = one - two/(t+two);
-	    } else {
-	        t = expm1(-two*fabs(x));
-	        z= -t/(t+two);
-	    }
-    /* |x| > 22, return +-1 */
-	} else {
-	    z = one - tiny;		/* raised inexact flag */
-	}
-	return (jx>=0)? z: -z;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/math/sf_asinh.c b/newlib/libm/math/sf_asinh.c
deleted file mode 100644
index 4688ea8c1..000000000
--- a/newlib/libm/math/sf_asinh.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* sf_asinh.c -- float version of s_asinh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one =  1.0000000000e+00, /* 0x3F800000 */
-ln2 =  6.9314718246e-01, /* 0x3f317218 */
-huge=  1.0000000000e+30; 
-
-#ifdef __STDC__
-	float asinhf(float x)
-#else
-	float asinhf(x)
-	float x;
-#endif
-{	
-	float t,w;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(!FLT_UWORD_IS_FINITE(ix)) return x+x;	/* x is inf or NaN */
-	if(ix< 0x31800000) {	/* |x|<2**-28 */
-	    if(huge+x>one) return x;	/* return x inexact except 0 */
-	} 
-	if(ix>0x4d800000) {	/* |x| > 2**28 */
-	    w = __ieee754_logf(fabsf(x))+ln2;
-	} else if (ix>0x40000000) {	/* 2**28 > |x| > 2.0 */
-	    t = fabsf(x);
-	    w = __ieee754_logf((float)2.0*t+one/(__ieee754_sqrtf(x*x+one)+t));
-	} else {		/* 2.0 > |x| > 2**-28 */
-	    t = x*x;
-	    w =log1pf(fabsf(x)+t/(one+__ieee754_sqrtf(one+t)));
-	}
-	if(hx>0) return w; else return -w;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double asinh(double x)
-#else
-	double asinh(x)
-	double x;
-#endif
-{
-	return (double) asinhf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_atan.c b/newlib/libm/math/sf_atan.c
deleted file mode 100644
index 6edf05fe5..000000000
--- a/newlib/libm/math/sf_atan.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/* sf_atan.c -- float version of s_atan.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float atanhi[] = {
-#else
-static float atanhi[] = {
-#endif
-  4.6364760399e-01, /* atan(0.5)hi 0x3eed6338 */
-  7.8539812565e-01, /* atan(1.0)hi 0x3f490fda */
-  9.8279368877e-01, /* atan(1.5)hi 0x3f7b985e */
-  1.5707962513e+00, /* atan(inf)hi 0x3fc90fda */
-};
-
-#ifdef __STDC__
-static const float atanlo[] = {
-#else
-static float atanlo[] = {
-#endif
-  5.0121582440e-09, /* atan(0.5)lo 0x31ac3769 */
-  3.7748947079e-08, /* atan(1.0)lo 0x33222168 */
-  3.4473217170e-08, /* atan(1.5)lo 0x33140fb4 */
-  7.5497894159e-08, /* atan(inf)lo 0x33a22168 */
-};
-
-#ifdef __STDC__
-static const float aT[] = {
-#else
-static float aT[] = {
-#endif
-  3.3333334327e-01, /* 0x3eaaaaaa */
- -2.0000000298e-01, /* 0xbe4ccccd */
-  1.4285714924e-01, /* 0x3e124925 */
- -1.1111110449e-01, /* 0xbde38e38 */
-  9.0908870101e-02, /* 0x3dba2e6e */
- -7.6918758452e-02, /* 0xbd9d8795 */
-  6.6610731184e-02, /* 0x3d886b35 */
- -5.8335702866e-02, /* 0xbd6ef16b */
-  4.9768779427e-02, /* 0x3d4bda59 */
- -3.6531571299e-02, /* 0xbd15a221 */
-  1.6285819933e-02, /* 0x3c8569d7 */
-};
-
-#ifdef __STDC__
-	static const float 
-#else
-	static float 
-#endif
-one   = 1.0,
-huge   = 1.0e30;
-
-#ifdef __STDC__
-	float atanf(float x)
-#else
-	float atanf(x)
-	float x;
-#endif
-{
-	float w,s1,s2,z;
-	__int32_t ix,hx,id;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x50800000) {	/* if |x| >= 2^34 */
-	    if(FLT_UWORD_IS_NAN(ix))
-		return x+x;		/* NaN */
-	    if(hx>0) return  atanhi[3]+atanlo[3];
-	    else     return -atanhi[3]-atanlo[3];
-	} if (ix < 0x3ee00000) {	/* |x| < 0.4375 */
-	    if (ix < 0x31000000) {	/* |x| < 2^-29 */
-		if(huge+x>one) return x;	/* raise inexact */
-	    }
-	    id = -1;
-	} else {
-	x = fabsf(x);
-	if (ix < 0x3f980000) {		/* |x| < 1.1875 */
-	    if (ix < 0x3f300000) {	/* 7/16 <=|x|<11/16 */
-		id = 0; x = ((float)2.0*x-one)/((float)2.0+x); 
-	    } else {			/* 11/16<=|x|< 19/16 */
-		id = 1; x  = (x-one)/(x+one); 
-	    }
-	} else {
-	    if (ix < 0x401c0000) {	/* |x| < 2.4375 */
-		id = 2; x  = (x-(float)1.5)/(one+(float)1.5*x);
-	    } else {			/* 2.4375 <= |x| < 2^66 */
-		id = 3; x  = -(float)1.0/x;
-	    }
-	}}
-    /* end of argument reduction */
-	z = x*x;
-	w = z*z;
-    /* break sum from i=0 to 10 aT[i]z**(i+1) into odd and even poly */
-	s1 = z*(aT[0]+w*(aT[2]+w*(aT[4]+w*(aT[6]+w*(aT[8]+w*aT[10])))));
-	s2 = w*(aT[1]+w*(aT[3]+w*(aT[5]+w*(aT[7]+w*aT[9]))));
-	if (id<0) return x - x*(s1+s2);
-	else {
-	    z = atanhi[id] - ((x*(s1+s2) - atanlo[id]) - x);
-	    return (hx<0)? -z:z;
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double atan(double x)
-#else
-	double atan(x)
-	double x;
-#endif
-{
-	return (double) atanf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_ceil.c b/newlib/libm/math/sf_ceil.c
deleted file mode 100644
index 8a8edac14..000000000
--- a/newlib/libm/math/sf_ceil.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* sf_ceil.c -- float version of s_ceil.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float huge = 1.0e30;
-#else
-static float huge = 1.0e30;
-#endif
-
-#ifdef __STDC__
-	float ceilf(float x)
-#else
-	float ceilf(x)
-	float x;
-#endif
-{
-	__int32_t i0,j0;
-	__uint32_t i,ix;
-	GET_FLOAT_WORD(i0,x);
-	ix = (i0&0x7fffffff);
-	j0 = (ix>>23)-0x7f;
-	if(j0<23) {
-	    if(j0<0) { 	/* raise inexact if x != 0 */
-		if(huge+x>(float)0.0) {/* return 0*sign(x) if |x|<1 */
-		    if(i0<0) {i0=0x80000000;} 
-		    else if(!FLT_UWORD_IS_ZERO(ix)) { i0=0x3f800000;}
-		}
-	    } else {
-		i = (0x007fffff)>>j0;
-		if((i0&i)==0) return x; /* x is integral */
-		if(huge+x>(float)0.0) {	/* raise inexact flag */
-		    if(i0>0) i0 += (0x00800000)>>j0;
-		    i0 &= (~i);
-		}
-	    }
-	} else {
-	    if(!FLT_UWORD_IS_FINITE(ix)) return x+x; /* inf or NaN */
-	    else return x;		/* x is integral */
-	}
-	SET_FLOAT_WORD(x,i0);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double ceil(double x)
-#else
-	double ceil(x)
-	double x;
-#endif
-{
-	return (double) ceilf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_cos.c b/newlib/libm/math/sf_cos.c
deleted file mode 100644
index 4c0a9a535..000000000
--- a/newlib/libm/math/sf_cos.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* sf_cos.c -- float version of s_cos.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one=1.0;
-#else
-static float one=1.0;
-#endif
-
-#ifdef __STDC__
-	float cosf(float x)
-#else
-	float cosf(x)
-	float x;
-#endif
-{
-	float y[2],z=0.0;
-	__int32_t n,ix;
-
-	GET_FLOAT_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3f490fd8) return __kernel_cosf(x,z);
-
-    /* cos(Inf or NaN) is NaN */
-	else if (!FLT_UWORD_IS_FINITE(ix)) return x-x;
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2f(x,y);
-	    switch(n&3) {
-		case 0: return  __kernel_cosf(y[0],y[1]);
-		case 1: return -__kernel_sinf(y[0],y[1],1);
-		case 2: return -__kernel_cosf(y[0],y[1]);
-		default:
-		        return  __kernel_sinf(y[0],y[1],1);
-	    }
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double cos(double x)
-#else
-	double cos(x)
-	double x;
-#endif
-{
-	return (double) cosf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_erf.c b/newlib/libm/math/sf_erf.c
deleted file mode 100644
index 0329c60fa..000000000
--- a/newlib/libm/math/sf_erf.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* sf_erf.c -- float version of s_erf.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-tiny	    = 1e-30,
-half=  5.0000000000e-01, /* 0x3F000000 */
-one =  1.0000000000e+00, /* 0x3F800000 */
-two =  2.0000000000e+00, /* 0x40000000 */
-	/* c = (subfloat)0.84506291151 */
-erx =  8.4506291151e-01, /* 0x3f58560b */
-/*
- * Coefficients for approximation to  erf on [0,0.84375]
- */
-efx =  1.2837916613e-01, /* 0x3e0375d4 */
-efx8=  1.0270333290e+00, /* 0x3f8375d4 */
-pp0  =  1.2837916613e-01, /* 0x3e0375d4 */
-pp1  = -3.2504209876e-01, /* 0xbea66beb */
-pp2  = -2.8481749818e-02, /* 0xbce9528f */
-pp3  = -5.7702702470e-03, /* 0xbbbd1489 */
-pp4  = -2.3763017452e-05, /* 0xb7c756b1 */
-qq1  =  3.9791721106e-01, /* 0x3ecbbbce */
-qq2  =  6.5022252500e-02, /* 0x3d852a63 */
-qq3  =  5.0813062117e-03, /* 0x3ba68116 */
-qq4  =  1.3249473704e-04, /* 0x390aee49 */
-qq5  = -3.9602282413e-06, /* 0xb684e21a */
-/*
- * Coefficients for approximation to  erf  in [0.84375,1.25] 
- */
-pa0  = -2.3621185683e-03, /* 0xbb1acdc6 */
-pa1  =  4.1485610604e-01, /* 0x3ed46805 */
-pa2  = -3.7220788002e-01, /* 0xbebe9208 */
-pa3  =  3.1834661961e-01, /* 0x3ea2fe54 */
-pa4  = -1.1089469492e-01, /* 0xbde31cc2 */
-pa5  =  3.5478305072e-02, /* 0x3d1151b3 */
-pa6  = -2.1663755178e-03, /* 0xbb0df9c0 */
-qa1  =  1.0642088205e-01, /* 0x3dd9f331 */
-qa2  =  5.4039794207e-01, /* 0x3f0a5785 */
-qa3  =  7.1828655899e-02, /* 0x3d931ae7 */
-qa4  =  1.2617121637e-01, /* 0x3e013307 */
-qa5  =  1.3637083583e-02, /* 0x3c5f6e13 */
-qa6  =  1.1984500103e-02, /* 0x3c445aa3 */
-/*
- * Coefficients for approximation to  erfc in [1.25,1/0.35]
- */
-ra0  = -9.8649440333e-03, /* 0xbc21a093 */
-ra1  = -6.9385856390e-01, /* 0xbf31a0b7 */
-ra2  = -1.0558626175e+01, /* 0xc128f022 */
-ra3  = -6.2375331879e+01, /* 0xc2798057 */
-ra4  = -1.6239666748e+02, /* 0xc322658c */
-ra5  = -1.8460508728e+02, /* 0xc3389ae7 */
-ra6  = -8.1287437439e+01, /* 0xc2a2932b */
-ra7  = -9.8143291473e+00, /* 0xc11d077e */
-sa1  =  1.9651271820e+01, /* 0x419d35ce */
-sa2  =  1.3765776062e+02, /* 0x4309a863 */
-sa3  =  4.3456588745e+02, /* 0x43d9486f */
-sa4  =  6.4538726807e+02, /* 0x442158c9 */
-sa5  =  4.2900814819e+02, /* 0x43d6810b */
-sa6  =  1.0863500214e+02, /* 0x42d9451f */
-sa7  =  6.5702495575e+00, /* 0x40d23f7c */
-sa8  = -6.0424413532e-02, /* 0xbd777f97 */
-/*
- * Coefficients for approximation to  erfc in [1/.35,28]
- */
-rb0  = -9.8649431020e-03, /* 0xbc21a092 */
-rb1  = -7.9928326607e-01, /* 0xbf4c9dd4 */
-rb2  = -1.7757955551e+01, /* 0xc18e104b */
-rb3  = -1.6063638306e+02, /* 0xc320a2ea */
-rb4  = -6.3756646729e+02, /* 0xc41f6441 */
-rb5  = -1.0250950928e+03, /* 0xc480230b */
-rb6  = -4.8351919556e+02, /* 0xc3f1c275 */
-sb1  =  3.0338060379e+01, /* 0x41f2b459 */
-sb2  =  3.2579251099e+02, /* 0x43a2e571 */
-sb3  =  1.5367296143e+03, /* 0x44c01759 */
-sb4  =  3.1998581543e+03, /* 0x4547fdbb */
-sb5  =  2.5530502930e+03, /* 0x451f90ce */
-sb6  =  4.7452853394e+02, /* 0x43ed43a7 */
-sb7  = -2.2440952301e+01; /* 0xc1b38712 */
-
-#ifdef __STDC__
-	float erff(float x) 
-#else
-	float erff(x) 
-	float x;
-#endif
-{
-	__int32_t hx,ix,i;
-	float R,S,P,Q,s,y,z,r;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(!FLT_UWORD_IS_FINITE(ix)) {		/* erf(nan)=nan */
-	    i = ((__uint32_t)hx>>31)<<1;
-	    return (float)(1-i)+one/x;	/* erf(+-inf)=+-1 */
-	}
-
-	if(ix < 0x3f580000) {		/* |x|<0.84375 */
-	    if(ix < 0x31800000) { 	/* |x|<2**-28 */
-	        if (ix < 0x04000000) 
-		    /*avoid underflow */
-		    return (float)0.125*((float)8.0*x+efx8*x);
-		return x + efx*x;
-	    }
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    return x + x*y;
-	}
-	if(ix < 0x3fa00000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabsf(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) return erx + P/Q; else return -erx - P/Q;
-	}
-	if (ix >= 0x40c00000) {		/* inf>|x|>=6 */
-	    if(hx>=0) return one-tiny; else return tiny-one;
-	}
-	x = fabsf(x);
- 	s = one/(x*x);
-	if(ix< 0x4036DB6E) {	/* |x| < 1/0.35 */
-	    R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	    S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	} else {	/* |x| >= 1/0.35 */
-	    R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	    S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	}
-	GET_FLOAT_WORD(ix,x);
-	SET_FLOAT_WORD(z,ix&0xfffff000);
-	r  =  __ieee754_expf(-z*z-(float)0.5625)*__ieee754_expf((z-x)*(z+x)+R/S);
-	if(hx>=0) return one-r/x; else return  r/x-one;
-}
-
-#ifdef __STDC__
-	float erfcf(float x) 
-#else
-	float erfcf(x) 
-	float x;
-#endif
-{
-	__int32_t hx,ix;
-	float R,S,P,Q,s,y,z,r;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(!FLT_UWORD_IS_FINITE(ix)) {			/* erfc(nan)=nan */
-						/* erfc(+-inf)=0,2 */
-	    return (float)(((__uint32_t)hx>>31)<<1)+one/x;
-	}
-
-	if(ix < 0x3f580000) {		/* |x|<0.84375 */
-	    if(ix < 0x23800000)  	/* |x|<2**-56 */
-		return one-x;
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    if(hx < 0x3e800000) {  	/* x<1/4 */
-		return one-(x+x*y);
-	    } else {
-		r = x*y;
-		r += (x-half);
-	        return half - r ;
-	    }
-	}
-	if(ix < 0x3fa00000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabsf(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) {
-	        z  = one-erx; return z - P/Q; 
-	    } else {
-		z = erx+P/Q; return one+z;
-	    }
-	}
-	if (ix < 0x41e00000) {		/* |x|<28 */
-	    x = fabsf(x);
- 	    s = one/(x*x);
-	    if(ix< 0x4036DB6D) {	/* |x| < 1/.35 ~ 2.857143*/
-	        R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	        S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	    } else {			/* |x| >= 1/.35 ~ 2.857143 */
-		if(hx<0&&ix>=0x40c00000) return two-tiny;/* x < -6 */
-	        R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	        S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	    }
-	    GET_FLOAT_WORD(ix,x);
-	    SET_FLOAT_WORD(z,ix&0xfffff000);
-	    r  =  __ieee754_expf(-z*z-(float)0.5625)*
-			__ieee754_expf((z-x)*(z+x)+R/S);
-	    if(hx>0) return r/x; else return two-r/x;
-	} else {
-	    if(hx>0) return tiny*tiny; else return two-tiny;
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double erf(double x)
-#else
-	double erf(x)
-	double x;
-#endif
-{
-	return (double) erff((float) x);
-}
-
-#ifdef __STDC__
-	double erfc(double x)
-#else
-	double erfc(x)
-	double x;
-#endif
-{
-	return (double) erfcf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_fabs.c b/newlib/libm/math/sf_fabs.c
deleted file mode 100644
index 2aaed326a..000000000
--- a/newlib/libm/math/sf_fabs.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* sf_fabs.c -- float version of s_fabs.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * fabsf(x) returns the absolute value of x.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float fabsf(float x)
-#else
-	float fabsf(x)
-	float x;
-#endif
-{
-	__uint32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	SET_FLOAT_WORD(x,ix&0x7fffffff);
-        return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fabs(double x)
-#else
-	double fabs(x)
-	double x;
-#endif
-{
-	return (double) fabsf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_floor.c b/newlib/libm/math/sf_floor.c
deleted file mode 100644
index 9264d81e9..000000000
--- a/newlib/libm/math/sf_floor.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* sf_floor.c -- float version of s_floor.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * floorf(x)
- * Return x rounded toward -inf to integral value
- * Method:
- *	Bit twiddling.
- * Exception:
- *	Inexact flag raised if x not equal to floorf(x).
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float huge = 1.0e30;
-#else
-static float huge = 1.0e30;
-#endif
-
-#ifdef __STDC__
-	float floorf(float x)
-#else
-	float floorf(x)
-	float x;
-#endif
-{
-	__int32_t i0,j0;
-	__uint32_t i,ix;
-	GET_FLOAT_WORD(i0,x);
-	ix = (i0&0x7fffffff);
-	j0 = (ix>>23)-0x7f;
-	if(j0<23) {
-	    if(j0<0) { 	/* raise inexact if x != 0 */
-		if(huge+x>(float)0.0) {/* return 0*sign(x) if |x|<1 */
-		    if(i0>=0) {i0=0;} 
-		    else if(!FLT_UWORD_IS_ZERO(ix))
-			{ i0=0xbf800000;}
-		}
-	    } else {
-		i = (0x007fffff)>>j0;
-		if((i0&i)==0) return x; /* x is integral */
-		if(huge+x>(float)0.0) {	/* raise inexact flag */
-		    if(i0<0) i0 += (0x00800000)>>j0;
-		    i0 &= (~i);
-		}
-	    }
-	} else {
-	    if(!FLT_UWORD_IS_FINITE(ix)) return x+x;	/* inf or NaN */
-	    else return x;		/* x is integral */
-	}
-	SET_FLOAT_WORD(x,i0);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double floor(double x)
-#else
-	double floor(x)
-	double x;
-#endif
-{
-	return (double) floorf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_frexp.c b/newlib/libm/math/sf_frexp.c
deleted file mode 100644
index 8dd8a9767..000000000
--- a/newlib/libm/math/sf_frexp.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* sf_frexp.c -- float version of s_frexp.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-two25 =  3.3554432000e+07; /* 0x4c000000 */
-
-#ifdef __STDC__
-	float frexpf(float x, int *eptr)
-#else
-	float frexpf(x, eptr)
-	float x; int *eptr;
-#endif
-{
-	__int32_t hx, ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = 0x7fffffff&hx;
-	*eptr = 0;
-	if(!FLT_UWORD_IS_FINITE(ix)||FLT_UWORD_IS_ZERO(ix)) return x;	/* 0,inf,nan */
-	if (FLT_UWORD_IS_SUBNORMAL(ix)) {		/* subnormal */
-	    x *= two25;
-	    GET_FLOAT_WORD(hx,x);
-	    ix = hx&0x7fffffff;
-	    *eptr = -25;
-	}
-	*eptr += (ix>>23)-126;
-	hx = (hx&0x807fffff)|0x3f000000;
-	SET_FLOAT_WORD(x,hx);
-	return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double frexp(double x, int *eptr)
-#else
-	double frexp(x, eptr)
-	double x; int *eptr;
-#endif
-{
-	return (double) frexpf((float) x, eptr);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_isinf.c b/newlib/libm/math/sf_isinf.c
deleted file mode 100644
index 43a8abdf2..000000000
--- a/newlib/libm/math/sf_isinf.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * isinff(x) returns 1 if x is +-infinity, else 0;
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	int isinff(float x)
-#else
-	int isinff(x)
-	float x;
-#endif
-{
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	return FLT_UWORD_IS_INFINITE(ix);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int isinf(double x)
-#else
-	int isinf(x)
-	double x;
-#endif
-{
-	return isinff((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_isnan.c b/newlib/libm/math/sf_isnan.c
deleted file mode 100644
index 0b4be3e9c..000000000
--- a/newlib/libm/math/sf_isnan.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* sf_isnan.c -- float version of s_isnan.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * isnanf(x) returns 1 is x is nan, else 0;
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	int isnanf(float x)
-#else
-	int isnanf(x)
-	float x;
-#endif
-{
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	return FLT_UWORD_IS_NAN(ix);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	int isnan(double x)
-#else
-	int isnan(x)
-	double x;
-#endif
-{
-	return isnanf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_ldexp.c b/newlib/libm/math/sf_ldexp.c
deleted file mode 100644
index 278130482..000000000
--- a/newlib/libm/math/sf_ldexp.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* sf_ldexp.c -- float version of s_ldexp.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float ldexpf(float value, int exp)
-#else
-	float ldexpf(value, exp)
-	float value; int exp;
-#endif
-{
-	if(!finitef(value)||value==(float)0.0) return value;
-	value = scalbnf(value,exp);
-	if(!finitef(value)||value==(float)0.0) errno = ERANGE;
-	return value;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double ldexp(double value, int exp)
-#else
-	double ldexp(value, exp)
-	double value; int exp;
-#endif
-{
-	return (double) ldexpf((float) value, exp);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_signif.c b/newlib/libm/math/sf_signif.c
deleted file mode 100644
index fd4a07247..000000000
--- a/newlib/libm/math/sf_signif.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* sf_signif.c -- float version of s_signif.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float significandf(float x)
-#else
-	float significandf(x)
-	float x;
-#endif
-{
-	return __ieee754_scalbf(x,(float) -ilogbf(x));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double significand(double x)
-#else
-	double significand(x)
-	double x;
-#endif
-{
-	return (double) significandf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_sin.c b/newlib/libm/math/sf_sin.c
deleted file mode 100644
index da81845d9..000000000
--- a/newlib/libm/math/sf_sin.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* sf_sin.c -- float version of s_sin.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float sinf(float x)
-#else
-	float sinf(x)
-	float x;
-#endif
-{
-	float y[2],z=0.0;
-	__int32_t n,ix;
-
-	GET_FLOAT_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3f490fd8) return __kernel_sinf(x,z,0);
-
-    /* sin(Inf or NaN) is NaN */
-	else if (!FLT_UWORD_IS_FINITE(ix)) return x-x;
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2f(x,y);
-	    switch(n&3) {
-		case 0: return  __kernel_sinf(y[0],y[1],1);
-		case 1: return  __kernel_cosf(y[0],y[1]);
-		case 2: return -__kernel_sinf(y[0],y[1],1);
-		default:
-			return -__kernel_cosf(y[0],y[1]);
-	    }
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sin(double x)
-#else
-	double sin(x)
-	double x;
-#endif
-{
-	return (double) sinf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_tan.c b/newlib/libm/math/sf_tan.c
deleted file mode 100644
index 18c47a454..000000000
--- a/newlib/libm/math/sf_tan.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* sf_tan.c -- float version of s_tan.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float tanf(float x)
-#else
-	float tanf(x)
-	float x;
-#endif
-{
-	float y[2],z=0.0;
-	__int32_t n,ix;
-
-	GET_FLOAT_WORD(ix,x);
-
-    /* |x| ~< pi/4 */
-	ix &= 0x7fffffff;
-	if(ix <= 0x3f490fda) return __kernel_tanf(x,z,1);
-
-    /* tan(Inf or NaN) is NaN */
-	else if (!FLT_UWORD_IS_FINITE(ix)) return x-x;		/* NaN */
-
-    /* argument reduction needed */
-	else {
-	    n = __ieee754_rem_pio2f(x,y);
-	    return __kernel_tanf(y[0],y[1],1-((n&1)<<1)); /*   1 -- n even
-							      -1 -- n odd */
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double tan(double x)
-#else
-	double tan(x)
-	double x;
-#endif
-{
-	return (double) tanf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/sf_tanh.c b/newlib/libm/math/sf_tanh.c
deleted file mode 100644
index 1eb44a2ff..000000000
--- a/newlib/libm/math/sf_tanh.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* sf_tanh.c -- float version of s_tanh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one=1.0, two=2.0, tiny = 1.0e-30;
-#else
-static float one=1.0, two=2.0, tiny = 1.0e-30;
-#endif
-
-#ifdef __STDC__
-	float tanhf(float x)
-#else
-	float tanhf(x)
-	float x;
-#endif
-{
-	float t,z;
-	__int32_t jx,ix;
-
-	GET_FLOAT_WORD(jx,x);
-	ix = jx&0x7fffffff;
-
-    /* x is INF or NaN */
-	if(!FLT_UWORD_IS_FINITE(ix)) {
-	    if (jx>=0) return one/x+one;    /* tanh(+-inf)=+-1 */
-	    else       return one/x-one;    /* tanh(NaN) = NaN */
-	}
-
-    /* |x| < 22 */
-	if (ix < 0x41b00000) {		/* |x|<22 */
-	    if (ix<0x24000000) 		/* |x|<2**-55 */
-		return x*(one+x);    	/* tanh(small) = small */
-	    if (ix>=0x3f800000) {	/* |x|>=1  */
-		t = expm1f(two*fabsf(x));
-		z = one - two/(t+two);
-	    } else {
-	        t = expm1f(-two*fabsf(x));
-	        z= -t/(t+two);
-	    }
-    /* |x| > 22, return +-1 */
-	} else {
-	    z = one - tiny;		/* raised inexact flag */
-	}
-	return (jx>=0)? z: -z;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double tanh(double x)
-#else
-	double tanh(x)
-	double x;
-#endif
-{
-	return (double) tanhf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_acos.c b/newlib/libm/math/w_acos.c
deleted file mode 100644
index 0a4823f3d..000000000
--- a/newlib/libm/math/w_acos.c
+++ /dev/null
@@ -1,118 +0,0 @@
-
-/* @(#)w_acos.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-        <<acos>>, <<acosf>>---arc cosine
-
-INDEX
-	acos
-INDEX
-	acosf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double acos(double <[x]>);
-        float acosf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double acos(<[x]>)
-        double <[x]>;
-
-        float acosf(<[x]>)
-        float <[x]>;
-
-
-
-DESCRIPTION
-
-	<<acos>> computes the inverse cosine (arc cosine) of the input value.
-	Arguments to <<acos>> must be in the range @minus{}1 to 1. 
-
-	<<acosf>> is identical to <<acos>>, except that it performs
-	its calculations on <<floats>>.
-
-RETURNS
-	@ifnottex
-	<<acos>> and <<acosf>> return values in radians, in the range of 0 to pi.
-	@end ifnottex
-	@tex
-	<<acos>> and <<acosf>> return values in radians, in the range of <<0>> to $\pi$.
-	@end tex
-
-	If <[x]> is not between @minus{}1 and 1, the returned value is NaN
-	(not a number) the global variable <<errno>> is set to <<EDOM>>, and a
-	<<DOMAIN error>> message is sent as standard error output.
-
-	You can modify error handling for these functions using <<matherr>>.
-
-
-QUICKREF ANSI SVID POSIX RENTRANT
- acos	 y,y,y,m
- acosf   n,n,n,m
-
-MATHREF  
- acos, [-1,1], acos(arg),,,
- acos, NAN,    arg,DOMAIN,EDOM
-
-MATHREF
- acosf, [-1,1], acosf(arg),,,
- acosf, NAN,    argf,DOMAIN,EDOM
- 
-*/
-
-/*
- * wrap_acos(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double acos(double x)		/* wrapper acos */
-#else
-	double acos(x)			/* wrapper acos */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_acos(x);
-#else
-	double z;
-       	struct exception exc;
-       	z = __ieee754_acos(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(fabs(x)>1.0) { 
-	    /* acos(|x|>1) */
-	    exc.type = DOMAIN;
-	    exc.name = "acos";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    exc.retval = 0.0;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-            }
-            if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_acosh.c b/newlib/libm/math/w_acosh.c
deleted file mode 100644
index 022c5c6ee..000000000
--- a/newlib/libm/math/w_acosh.c
+++ /dev/null
@@ -1,122 +0,0 @@
-
-/* @(#)w_acosh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-<<acosh>>, <<acoshf>>---inverse hyperbolic cosine 
-
-INDEX
-acosh
-INDEX
-acoshf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double acosh(double <[x]>);
-	float acoshf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double acosh(<[x]>)
-	double <[x]>;
-
-	float acoshf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-<<acosh>> calculates the inverse hyperbolic cosine of <[x]>.
-<<acosh>> is defined as 
-@ifnottex
-. log(<[x]> + sqrt(<[x]>*<[x]>-1))
-@end ifnottex
-@tex
-$$ln\Bigl(x + \sqrt{x^2-1}\Bigr)$$
-@end tex
-
-<[x]> must be a number greater than or equal to 1.
-
-<<acoshf>> is identical, other than taking and returning floats.
-
-RETURNS
-<<acosh>> and <<acoshf>> return the calculated value.  If <[x]> 
-less than 1, the return value is NaN and <<errno>> is set to <<EDOM>>.
-
-You can change the error-handling behavior with the non-ANSI
-<<matherr>> function.
-
-PORTABILITY
-Neither <<acosh>> nor <<acoshf>> are ANSI C.  They are not recommended
-for portable programs.
-
-
-QUICKREF ANSI SVID POSIX RENTRANT
- acos	 n,n,n,m
- acosf   n,n,n,m
-
-MATHREF  
- acosh, NAN,   arg,DOMAIN,EDOM
- acosh, < 1.0, NAN,DOMAIN,EDOM
- acosh, >=1.0, acosh(arg),,,
-
-MATHREF
- acoshf, NAN,   arg,DOMAIN,EDOM
- acoshf, < 1.0, NAN,DOMAIN,EDOM
- acoshf, >=1.0, acosh(arg),,,
-
-*/
-
-/* 
- * wrapper acosh(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double acosh(double x)		/* wrapper acosh */
-#else
-	double acosh(x)			/* wrapper acosh */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_acosh(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_acosh(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(x<1.0) {
-            /* acosh(x<1) */
-            exc.type = DOMAIN;
-            exc.name = "acosh";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-               errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_asin.c b/newlib/libm/math/w_asin.c
deleted file mode 100644
index b146dfd9b..000000000
--- a/newlib/libm/math/w_asin.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-/* @(#)w_asin.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<asin>>, <<asinf>>---arc sine
-
-INDEX
-   asin
-INDEX
-   asinf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double asin(double <[x]>);
-        float asinf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double asin(<[x]>)
-        double <[x]>;
-
-        float asinf(<[x]>)
-        float <[x]>;
-
-
-DESCRIPTION
-
-<<asin>> computes the inverse sine (arc sine) of the argument <[x]>.
-Arguments to <<asin>> must be in the range @minus{}1 to 1.
-
-<<asinf>> is identical to <<asin>>, other than taking and
-returning floats.
-
-You can modify error handling for these routines using <<matherr>>. 
-
-RETURNS
-@ifnottex
-<<asin>> returns values in radians, in the range of -pi/2 to pi/2.
-@end ifnottex
-@tex
-<<asin>> returns values in radians, in the range of $-\pi/2$ to $\pi/2$.
-@end tex
-
-If <[x]> is not in the range @minus{}1 to 1, <<asin>> and <<asinf>>
-return NaN (not a number), set the global variable <<errno>> to
-<<EDOM>>, and issue a <<DOMAIN error>> message.
-
-You can change this error treatment using <<matherr>>.
-
-QUICKREF ANSI SVID POSIX RENTRANT
- asin	 y,y,y,m
- asinf   n,n,n,m
-
-MATHREF  
- asin,  -1<=arg<=1, asin(arg),,,
- asin,  NAN,  arg,EDOM, DOMAIN
-
-MATHREF  
- asinf,  -1<=arg<=1, asin(arg),,,
- asinf,  NAN,  arg,EDOM, DOMAIN 
-
-
-*/
-
-/* 
- * wrapper asin(x)
- */
-
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double asin(double x)		/* wrapper asin */
-#else
-	double asin(x)			/* wrapper asin */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_asin(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_asin(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(fabs(x)>1.0) {
-	    /* asin(|x|>1) */
-	    exc.type = DOMAIN;
-	    exc.name = "asin";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    exc.retval = 0.0;
-	    if(_LIB_VERSION == _POSIX_)
-	      errno = EDOM;
-	    else if (!matherr(&exc)) {
-	      errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	      errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_atan2.c b/newlib/libm/math/w_atan2.c
deleted file mode 100644
index 25eb1617e..000000000
--- a/newlib/libm/math/w_atan2.c
+++ /dev/null
@@ -1,117 +0,0 @@
-
-/* @(#)w_atan2.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<atan2>>, <<atan2f>>---arc tangent of y/x
-
-INDEX
-   atan2
-INDEX
-   atan2f
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atan2(double <[y]>,double <[x]>);
-        float atan2f(float <[y]>,float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atan2(<[y]>,<[x]>);
-        double <[y]>;
-        double <[x]>;
-
-        float atan2f(<[y]>,<[x]>);
-        float <[y]>;
-        float <[x]>;
-
-DESCRIPTION
-
-<<atan2>> computes the inverse tangent (arc tangent) of <[y]>/<[x]>. 
-<<atan2>> produces the correct result even for angles near 
-@ifnottex
-pi/2 or -pi/2 
-@end ifnottex
-@tex
-$\pi/2$ or $-\pi/2$
-@end tex
-(that is, when <[x]> is near 0). 
-
-<<atan2f>> is identical to <<atan2>>, save that it takes and returns
-<<float>>. 
-
-RETURNS
-<<atan2>> and <<atan2f>> return a value in radians, in the range of 
-@ifnottex
--pi to pi.
-@end ifnottex
-@tex
-$-\pi$ to $\pi$.
-@end tex
-
-If both <[x]> and <[y]> are 0.0, <<atan2>> causes a <<DOMAIN>> error.
-
-You can modify error handling for these functions using <<matherr>>.
-
-PORTABILITY
-<<atan2>> is ANSI C.  <<atan2f>> is an extension.
-
-
-*/
-
-/* 
- * wrapper atan2(y,x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double atan2(double y, double x)	/* wrapper atan2 */
-#else
-	double atan2(y,x)			/* wrapper atan2 */
-	double y,x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_atan2(y,x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_atan2(y,x);
-	if(_LIB_VERSION == _IEEE_||isnan(x)||isnan(y)) return z;
-	if(x==0.0&&y==0.0) {
-	    /* atan2(+-0,+-0) */
-	    exc.arg1 = y;
-	    exc.arg2 = x;
-	    exc.type = DOMAIN;
-	    exc.name = "atan2";
-	    exc.err = 0;
-	    exc.retval = 0.0;
-	    if(_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_atanh.c b/newlib/libm/math/w_atanh.c
deleted file mode 100644
index 07fd45962..000000000
--- a/newlib/libm/math/w_atanh.c
+++ /dev/null
@@ -1,140 +0,0 @@
-
-/* @(#)w_atanh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<atanh>>, <<atanhf>>---inverse hyperbolic tangent 
-
-INDEX
-	atanh
-INDEX
-	atanhf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double atanh(double <[x]>);
-	float atanhf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double atanh(<[x]>)
-	double <[x]>;
-
-	float atanhf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-	<<atanh>> calculates the inverse hyperbolic tangent of <[x]>.
-
-	<<atanhf>> is identical, other than taking and returning
-	<<float>> values.
-
-RETURNS
-	<<atanh>> and <<atanhf>> return the calculated value.
-
-	If 
-	@ifnottex
-	|<[x]>|
-	@end ifnottex
-	@tex
-	$|x|$
-	@end tex
-	is greater than 1, the global <<errno>> is set to <<EDOM>> and
-	the result is a NaN.  A <<DOMAIN error>> is reported.
-
-	If 
-	@ifnottex
-	|<[x]>|
-	@end ifnottex
-	@tex
-	$|x|$
-	@end tex
-	is 1, the global <<errno>> is set to <<EDOM>>; and the result is 
-	infinity with the same sign as <<x>>.  A <<SING error>> is reported.
-
-	You can modify the error handling for these routines using
-	<<matherr>>.
-
-PORTABILITY
-	Neither <<atanh>> nor <<atanhf>> are ANSI C.
-
-QUICKREF
-	atanh - pure
-	atanhf - pure
-
-
-*/
-
-/* 
- * wrapper atanh(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double atanh(double x)		/* wrapper atanh */
-#else
-	double atanh(x)			/* wrapper atanh */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_atanh(x);
-#else
-	double z,y;
-	struct exception exc;
-	z = __ieee754_atanh(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	y = fabs(x);
-	if(y>=1.0) {
-	    if(y>1.0) {
-                /* atanh(|x|>1) */
-                exc.type = DOMAIN;
-                exc.name = "atanh";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = x;
-                exc.retval = 0.0/0.0;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  errno = EDOM;
-                }
-	    } else { 
-                /* atanh(|x|=1) */
-                exc.type = SING;
-                exc.name = "atanh";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = x;
-		exc.retval = x/0.0;	/* sign(x)*inf */
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  errno = EDOM;
-                }
-            }
-	    if (exc.err != 0)
-              errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
diff --git a/newlib/libm/math/w_cabs.c b/newlib/libm/math/w_cabs.c
deleted file mode 100644
index bef76680c..000000000
--- a/newlib/libm/math/w_cabs.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * cabs() wrapper for hypot().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-struct complex {
-	double x;
-	double y;
-};
-
-double
-cabs(z)
-	struct complex z;
-{
-	return hypot(z.x, z.y);
-}
diff --git a/newlib/libm/math/w_cosh.c b/newlib/libm/math/w_cosh.c
deleted file mode 100644
index ab046f6ed..000000000
--- a/newlib/libm/math/w_cosh.c
+++ /dev/null
@@ -1,116 +0,0 @@
-
-/* @(#)w_cosh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-
-FUNCTION
-        <<cosh>>, <<coshf>>---hyperbolic cosine
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double cosh(double <[x]>);
-        float coshf(float <[x]>)
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double cosh(<[x]>)
-        double <[x]>;
-
-        float coshf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-
-	<<cosh>> computes the hyperbolic cosine of the argument <[x]>.
-	<<cosh(<[x]>)>> is defined as 
-	@ifnottex
-	. (exp(x) + exp(-x))/2
-	@end ifnottex
-	@tex
-	$${(e^x + e^{-x})} \over 2$$
-	@end tex
-
-	Angles are specified in radians.  
-		
-	<<coshf>> is identical, save that it takes and returns <<float>>.
-
-RETURNS
-	The computed value is returned.  When the correct value would create
-	an overflow,  <<cosh>> returns the value <<HUGE_VAL>> with the
-	appropriate sign, and the global value <<errno>> is set to <<ERANGE>>.
-
-	You can modify error handling for these functions using the
-	function <<matherr>>.
-
-PORTABILITY
-	<<cosh>> is ANSI.  
-	<<coshf>> is an extension.
-
-QUICKREF
-	cosh ansi pure
-	coshf - pure
-*/
-
-/* 
- * wrapper cosh(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
- 
-#ifdef __STDC__
-	double cosh(double x)		/* wrapper cosh */
-#else
-	double cosh(x)			/* wrapper cosh */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_cosh(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_cosh(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(fabs(x)>7.10475860073943863426e+02) {	
-	    /* cosh(finite) overflow */
-#ifndef HUGE_VAL
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "cosh";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = HUGE;
-	    else
-	       exc.retval = HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_drem.c b/newlib/libm/math/w_drem.c
deleted file mode 100644
index d289bdaac..000000000
--- a/newlib/libm/math/w_drem.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * drem() wrapper for remainder().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-double
-drem(x, y)
-	double x, y;
-{
-	return remainder(x, y);
-}
diff --git a/newlib/libm/math/w_exp.c b/newlib/libm/math/w_exp.c
deleted file mode 100644
index eb36390c2..000000000
--- a/newlib/libm/math/w_exp.c
+++ /dev/null
@@ -1,136 +0,0 @@
-
-/* @(#)w_exp.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<exp>>, <<expf>>---exponential
-INDEX
-	exp
-INDEX
-	expf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double exp(double <[x]>);
-	float expf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double exp(<[x]>);
-	double <[x]>;
-
-	float expf(<[x]>);
-	float <[x]>;
-
-DESCRIPTION
-	<<exp>> and <<expf>> calculate the exponential of <[x]>, that is, 
-	@ifnottex
-	e raised to the power <[x]> (where e
-	@end ifnottex
-	@tex
-	$e^x$ (where $e$
-	@end tex
-	is the base of the natural system of logarithms, approximately 2.71828).
-
-	You can use the (non-ANSI) function <<matherr>> to specify
-	error handling for these functions.
-
-RETURNS
-	On success, <<exp>> and <<expf>> return the calculated value.
-	If the result underflows, the returned value is <<0>>.  If the
-	result overflows, the returned value is <<HUGE_VAL>>.  In
-	either case, <<errno>> is set to <<ERANGE>>.
-
-PORTABILITY
-	<<exp>> is ANSI C.  <<expf>> is an extension.
-
-*/
-
-/* 
- * wrapper exp(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-o_threshold=  7.09782712893383973096e+02,  /* 0x40862E42, 0xFEFA39EF */
-u_threshold= -7.45133219101941108420e+02;  /* 0xc0874910, 0xD52D3051 */
-
-#ifdef __STDC__
-	double exp(double x)		/* wrapper exp */
-#else
-	double exp(x)			/* wrapper exp */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_exp(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_exp(x);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(finite(x)) {
-	    if(x>o_threshold) {
-		/* exp(finite) overflow */
-#ifndef HUGE_VAL
-#define HUGE_VAL inf
-	        double inf = 0.0;
-
-	        SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-		exc.type = OVERFLOW;
-		exc.name = "exp";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = x;
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = HUGE;
-		else
-		  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-	        return exc.retval; 
-	    } else if(x<u_threshold) {
-		/* exp(finite) underflow */
-		exc.type = UNDERFLOW;
-		exc.name = "exp";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = x;
-		exc.retval = 0.0;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-	        return exc.retval; 
-	    } 
-	} 
-	return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_exp2.c b/newlib/libm/math/w_exp2.c
deleted file mode 100644
index ed0bc39e9..000000000
--- a/newlib/libm/math/w_exp2.c
+++ /dev/null
@@ -1,75 +0,0 @@
-
-/* @(#)w_exp2.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<exp2>>, <<exp2f>>---exponential
-INDEX
-	exp2
-INDEX
-	exp2f
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double exp2(double <[x]>);
-	float exp2f(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double exp2(<[x]>);
-	double <[x]>;
-
-	float exp2f(<[x]>);
-	float <[x]>;
-
-DESCRIPTION
-	<<exp2>> and <<exp2f>> calculate 2 ^ <[x]>, that is, 
-	@ifnottex
-	2 raised to the power <[x]>.
-	@end ifnottex
-	@tex
-	$2^x$
-	@end tex
-
-	You can use the (non-ANSI) function <<matherr>> to specify
-	error handling for these functions.
-
-RETURNS
-	On success, <<exp2>> and <<exp2f>> return the calculated value.
-	If the result underflows, the returned value is <<0>>.  If the
-	result overflows, the returned value is <<HUGE_VAL>>.  In
-	either case, <<errno>> is set to <<ERANGE>>.
-
-*/
-
-/*
- * wrapper exp2(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-#include <math.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double exp2(double x)		/* wrapper exp2 */
-#else
-	double exp2(x)			/* wrapper exp2 */
-	double x;
-#endif
-{
-  return pow(2.0, x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_fmod.c b/newlib/libm/math/w_fmod.c
deleted file mode 100644
index 47d1dd081..000000000
--- a/newlib/libm/math/w_fmod.c
+++ /dev/null
@@ -1,107 +0,0 @@
-
-/* @(#)w_fmod.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
-FUNCTION 
-<<fmod>>, <<fmodf>>---floating-point remainder (modulo)
-
-INDEX
-fmod
-INDEX
-fmodf
-
-ANSI_SYNOPSIS
-#include <math.h>
-double fmod(double <[x]>, double <[y]>)
-float fmodf(float <[x]>, float <[y]>)
-
-TRAD_SYNOPSIS
-#include <math.h>
-double fmod(<[x]>, <[y]>)
-double (<[x]>, <[y]>);
-
-float fmodf(<[x]>, <[y]>)
-float (<[x]>, <[y]>);
-
-DESCRIPTION
-The <<fmod>> and <<fmodf>> functions compute the floating-point
-remainder of <[x]>/<[y]> (<[x]> modulo <[y]>).
-
-RETURNS
-The <<fmod>> function returns the value 
-@ifnottex
-<[x]>-<[i]>*<[y]>, 
-@end ifnottex
-@tex
-$x-i\times y$,
-@end tex
-for the largest integer <[i]> such that, if <[y]> is nonzero, the
-result has the same sign as <[x]> and magnitude less than the
-magnitude of <[y]>. 
-
-<<fmod(<[x]>,0)>> returns NaN, and sets <<errno>> to <<EDOM>>.
-
-You can modify error treatment for these functions using <<matherr>>.
-
-PORTABILITY
-<<fmod>> is ANSI C. <<fmodf>> is an extension.
-*/
-
-/* 
- * wrapper fmod(x,y)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmod(double x, double y)	/* wrapper fmod */
-#else
-	double fmod(x,y)		/* wrapper fmod */
-	double x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_fmod(x,y);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_fmod(x,y);
-	if(_LIB_VERSION == _IEEE_ ||isnan(y)||isnan(x)) return z;
-	if(y==0.0) {
-            /* fmod(x,0) */
-            exc.type = DOMAIN;
-            exc.name = "fmod";
-	    exc.arg1 = x;
-	    exc.arg2 = y;
-	    exc.err = 0;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = x;
-	    else
-	       exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-                  errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_gamma.c b/newlib/libm/math/w_gamma.c
deleted file mode 100644
index fad40496d..000000000
--- a/newlib/libm/math/w_gamma.c
+++ /dev/null
@@ -1,193 +0,0 @@
-
-/* @(#)w_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<gamma>>, <<gammaf>>, <<lgamma>>, <<lgammaf>>, <<gamma_r>>,
-	<<gammaf_r>>, <<lgamma_r>>, <<lgammaf_r>>---logarithmic gamma
-	function
-INDEX
-gamma
-INDEX
-gammaf
-INDEX
-lgamma
-INDEX
-lgammaf
-INDEX
-gamma_r
-INDEX
-gammaf_r
-INDEX
-lgamma_r
-INDEX
-lgammaf_r
-
-ANSI_SYNOPSIS
-#include <math.h>
-double gamma(double <[x]>);
-float gammaf(float <[x]>);
-double lgamma(double <[x]>);
-float lgammaf(float <[x]>);
-double gamma_r(double <[x]>, int *<[signgamp]>);
-float gammaf_r(float <[x]>, int *<[signgamp]>);
-double lgamma_r(double <[x]>, int *<[signgamp]>);
-float lgammaf_r(float <[x]>, int *<[signgamp]>);
-
-TRAD_SYNOPSIS
-#include <math.h>
-double gamma(<[x]>)
-double <[x]>;
-float gammaf(<[x]>)
-float <[x]>;
-double lgamma(<[x]>)
-double <[x]>;
-float lgammaf(<[x]>)
-float <[x]>;
-double gamma_r(<[x]>, <[signgamp]>)
-double <[x]>;
-int <[signgamp]>;
-float gammaf_r(<[x]>, <[signgamp]>)
-float <[x]>;
-int <[signgamp]>;
-double lgamma_r(<[x]>, <[signgamp]>)
-double <[x]>;
-int <[signgamp]>;
-float lgammaf_r(<[x]>, <[signgamp]>)
-float <[x]>;
-int <[signgamp]>;
-
-DESCRIPTION
-<<gamma>> calculates 
-@tex
-$\mit ln\bigl(\Gamma(x)\bigr)$, 
-@end tex
-the natural logarithm of the gamma function of <[x]>.  The gamma function
-(<<exp(gamma(<[x]>))>>) is a generalization of factorial, and retains
-the property that  
-@ifnottex
-<<exp(gamma(N))>> is equivalent to <<N*exp(gamma(N-1))>>.
-@end ifnottex
-@tex
-$\mit \Gamma(N)\equiv N\times\Gamma(N-1)$.
-@end tex
-Accordingly, the results of the gamma function itself grow very
-quickly.  <<gamma>> is defined as 
-@tex
-$\mit ln\bigl(\Gamma(x)\bigr)$ rather than simply $\mit \Gamma(x)$
-@end tex
-@ifnottex
-the natural log of the gamma function, rather than the gamma function
-itself, 
-@end ifnottex
-to extend the useful range of results representable.
-
-The sign of the result is returned in the global variable <<signgam>>,
-which is declared in math.h.
-
-<<gammaf>> performs the same calculation as <<gamma>>, but uses and
-returns <<float>> values.
-
-<<lgamma>> and <<lgammaf>> are alternate names for <<gamma>> and
-<<gammaf>>.  The use of <<lgamma>> instead of <<gamma>> is a reminder
-that these functions compute the log of the gamma function, rather
-than the gamma function itself.
-
-The functions <<gamma_r>>, <<gammaf_r>>, <<lgamma_r>>, and
-<<lgammaf_r>> are just like <<gamma>>, <<gammaf>>, <<lgamma>>, and
-<<lgammaf>>, respectively, but take an additional argument.  This
-additional argument is a pointer to an integer.  This additional
-argument is used to return the sign of the result, and the global
-variable <<signgam>> is not used.  These functions may be used for
-reentrant calls (but they will still set the global variable <<errno>>
-if an error occurs).
-
-RETURNS
-Normally, the computed result is returned.  
-
-When <[x]> is a nonpositive integer, <<gamma>> returns <<HUGE_VAL>>
-and <<errno>> is set to <<EDOM>>.  If the result overflows, <<gamma>>
-returns <<HUGE_VAL>> and <<errno>> is set to <<ERANGE>>.
-
-You can modify this error treatment using <<matherr>>.
-
-PORTABILITY
-Neither <<gamma>> nor <<gammaf>> is ANSI C.  */
-
-/* double gamma(double x)
- * Return the logarithm of the Gamma function of x.
- *
- * Method: call gamma_r
- */
-
-#include "fdlibm.h"
-#include <reent.h>
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double gamma(double x)
-#else
-	double gamma(x)
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_gamma_r(x,&(_REENT_SIGNGAM(_REENT)));
-#else
-        double y;
-	struct exception exc;
-        y = __ieee754_gamma_r(x,&(_REENT_SIGNGAM(_REENT)));
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finite(y)&&finite(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "gamma";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            if (_LIB_VERSION == _SVID_)
-                exc.retval = HUGE;
-            else
-                exc.retval = HUGE_VAL;
-	    if(floor(x)==x&&x<=0.0) {
-		/* gamma(-integer) or gamma(0) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-            } else {
-		/* gamma(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-                else if (!matherr(&exc)) {
-                  errno = ERANGE;
-                }
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-        } else
-            return y;
-#endif
-}             
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_hypot.c b/newlib/libm/math/w_hypot.c
deleted file mode 100644
index 203bf0982..000000000
--- a/newlib/libm/math/w_hypot.c
+++ /dev/null
@@ -1,109 +0,0 @@
-
-/* @(#)w_hypot.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<hypot>>, <<hypotf>>---distance from origin
-INDEX
-	hypot
-INDEX
-	hypotf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double hypot(double <[x]>, double <[y]>);
-	float hypotf(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-	double hypot(<[x]>, <[y]>)
-	double <[x]>, <[y]>;
-
-	float hypotf(<[x]>, <[y]>)
-	float <[x]>, <[y]>;
-
-DESCRIPTION
-	<<hypot>> calculates the Euclidean distance
-	@tex
-	$\sqrt{x^2+y^2}$
-	@end tex
-	@ifnottex
-	<<sqrt(<[x]>*<[x]> + <[y]>*<[y]>)>>
-	@end ifnottex
-	between the origin (0,0) and a point represented by the
-	Cartesian coordinates (<[x]>,<[y]>).  <<hypotf>> differs only
-	in the type of its arguments and result.
-
-RETURNS
-	Normally, the distance value is returned.  On overflow,
-	<<hypot>> returns <<HUGE_VAL>> and sets <<errno>> to
-	<<ERANGE>>.
-
-	You can change the error treatment with <<matherr>>.
-
-PORTABILITY
-	<<hypot>> and <<hypotf>> are not ANSI C.  */
-
-/*
- * wrapper hypot(x,y)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double hypot(double x, double y)/* wrapper hypot */
-#else
-	double hypot(x,y)		/* wrapper hypot */
-	double x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_hypot(x,y);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_hypot(x,y);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if((!finite(z))&&finite(x)&&finite(y)) {
-	    /* hypot(finite,finite) overflow */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "hypot";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = y;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = HUGE;
-	    else
-	       exc.retval = HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	     	errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_j0.c b/newlib/libm/math/w_j0.c
deleted file mode 100644
index 2bf663316..000000000
--- a/newlib/libm/math/w_j0.c
+++ /dev/null
@@ -1,229 +0,0 @@
-
-/* @(#)w_j0.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<jN>>,<<jNf>>,<<yN>>,<<yNf>>---Bessel functions 
-
-INDEX
-j0
-INDEX
-j0f
-INDEX
-j1
-INDEX
-j1f
-INDEX
-jn
-INDEX
-jnf
-INDEX
-y0
-INDEX
-y0f
-INDEX
-y1
-INDEX
-y1f
-INDEX
-yn
-INDEX
-ynf
-
-ANSI_SYNOPSIS
-#include <math.h>
-double j0(double <[x]>);
-float j0f(float <[x]>);
-double j1(double <[x]>);
-float j1f(float <[x]>);
-double jn(int <[n]>, double <[x]>);
-float jnf(int <[n]>, float <[x]>);
-double y0(double <[x]>);
-float y0f(float <[x]>);
-double y1(double <[x]>);
-float y1f(float <[x]>);
-double yn(int <[n]>, double <[x]>);
-float ynf(int <[n]>, float <[x]>);
-
-TRAD_SYNOPSIS
-#include <math.h>
-
-double j0(<[x]>)
-double <[x]>;
-float j0f(<[x]>)
-float <[x]>;
-double j1(<[x]>)
-double <[x]>;
-float j1f(<[x]>)
-float <[x]>;
-double jn(<[n]>, <[x]>)
-int <[n]>;
-double <[x]>;
-float jnf(<[n]>, <[x]>)
-int <[n]>;
-float <[x]>;
-
-double y0(<[x]>)
-double <[x]>;
-float y0f(<[x]>)
-float <[x]>;
-double y1(<[x]>)
-double <[x]>;
-float y1f(<[x]>)
-float <[x]>;
-double yn(<[n]>, <[x]>)
-int <[n]>;
-double <[x]>;
-float ynf(<[n]>, <[x]>)
-int <[n]>;
-float <[x]>;
-
-DESCRIPTION
-The Bessel functions are a family of functions that solve the
-differential equation 
-@ifnottex
-.  2               2    2
-. x  y'' + xy' + (x  - p )y  = 0
-@end ifnottex
-@tex
-$$x^2{d^2y\over dx^2} + x{dy\over dx} + (x^2-p^2)y = 0$$
-@end tex
-These functions have many applications in engineering and physics.
-
-<<jn>> calculates the Bessel function of the first kind of order
-<[n]>.  <<j0>> and <<j1>> are special cases for order 0 and order
-1 respectively.
-
-Similarly, <<yn>> calculates the Bessel function of the second kind of
-order <[n]>, and <<y0>> and <<y1>> are special cases for order 0 and
-1.
-
-<<jnf>>, <<j0f>>, <<j1f>>, <<ynf>>, <<y0f>>, and <<y1f>> perform the
-same calculations, but on <<float>> rather than <<double>> values.
-
-RETURNS
-The value of each Bessel function at <[x]> is returned.
-
-PORTABILITY
-None of the Bessel functions are in ANSI C.
-*/
-
-/*
- * wrapper j0(double x), y0(double x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double j0(double x)		/* wrapper j0 */
-#else
-	double j0(x)			/* wrapper j0 */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_j0(x);
-#else
-	struct exception exc;
-	double z = __ieee754_j0(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(fabs(x)>X_TLOSS) {
-	    /* j0(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "j0";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	double y0(double x)		/* wrapper y0 */
-#else
-	double y0(x)			/* wrapper y0 */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_y0(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_y0(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-        if(x <= 0.0){
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    /* y0(0) = -inf or y0(x<0) = NaN */
-	    exc.type = DOMAIN;	/* should be SING for IEEE y0(0) */
-	    exc.name = "y0";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-        }
-	if(x>X_TLOSS) {
-	    /* y0(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "y0";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
-
-
-
diff --git a/newlib/libm/math/w_j1.c b/newlib/libm/math/w_j1.c
deleted file mode 100644
index ba7df1566..000000000
--- a/newlib/libm/math/w_j1.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-/* @(#)w_j1.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper of j1,y1 
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double j1(double x)		/* wrapper j1 */
-#else
-	double j1(x)			/* wrapper j1 */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_j1(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_j1(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-	if(fabs(x)>X_TLOSS) {
-	    /* j1(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "j1";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	double y1(double x)		/* wrapper y1 */
-#else
-	double y1(x)			/* wrapper y1 */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_y1(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_y1(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-        if(x <= 0.0){
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    /* y1(0) = -inf  or y1(x<0) = NaN */
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "y1";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval;              
-        }
-	if(x>X_TLOSS) {
-	    /* y1(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "y1";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
-
diff --git a/newlib/libm/math/w_jn.c b/newlib/libm/math/w_jn.c
deleted file mode 100644
index 6cadc9a01..000000000
--- a/newlib/libm/math/w_jn.c
+++ /dev/null
@@ -1,141 +0,0 @@
-
-/* @(#)w_jn.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper jn(int n, double x), yn(int n, double x)
- * floating point Bessel's function of the 1st and 2nd kind
- * of order n
- *          
- * Special cases:
- *	y0(0)=y1(0)=yn(n,0) = -inf with division by zero signal;
- *	y0(-ve)=y1(-ve)=yn(n,-ve) are NaN with invalid signal.
- * Note 2. About jn(n,x), yn(n,x)
- *	For n=0, j0(x) is called,
- *	for n=1, j1(x) is called,
- *	for n<x, forward recursion us used starting
- *	from values of j0(x) and j1(x).
- *	for n>x, a continued fraction approximation to
- *	j(n,x)/j(n-1,x) is evaluated and then backward
- *	recursion is used starting from a supposed value
- *	for j(n,x). The resulting value of j(0,x) is
- *	compared with the actual value to correct the
- *	supposed value of j(n,x).
- *
- *	yn(n,x) is similar in all respects, except
- *	that forward recursion is used for all
- *	values of n>1.
- *	
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double jn(int n, double x)	/* wrapper jn */
-#else
-	double jn(n,x)			/* wrapper jn */
-	double x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_jn(n,x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_jn(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-	if(fabs(x)>X_TLOSS) {
-	    /* jn(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "jn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	double yn(int n, double x)	/* wrapper yn */
-#else
-	double yn(n,x)			/* wrapper yn */
-	double x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_yn(n,x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_yn(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-        if(x <= 0.0){
-	    /* yn(n,0) = -inf or yn(x<0) = NaN */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "yn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	        exc.retval = -HUGE;
-	    else
-	        exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = EDOM;
-	    else if (!matherr(&exc)) {
-	        errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-        }
-	if(x>X_TLOSS) {
-	    /* yn(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "yn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_lgamma.c b/newlib/libm/math/w_lgamma.c
deleted file mode 100644
index e56e47767..000000000
--- a/newlib/libm/math/w_lgamma.c
+++ /dev/null
@@ -1,89 +0,0 @@
-
-/* @(#)w_lgamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* double lgamma(double x)
- * Return the logarithm of the Gamma function of x.
- *
- * Method: call __ieee754_lgamma_r
- */
-
-#include "fdlibm.h"
-#include <reent.h>
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double lgamma(double x)
-#else
-	double lgamma(x)
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_lgamma_r(x,&(_REENT_SIGNGAM(_REENT)));
-#else
-        double y;
-	struct exception exc;
-        y = __ieee754_lgamma_r(x,&(_REENT_SIGNGAM(_REENT)));
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finite(y)&&finite(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "lgamma";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = x;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = HUGE;
-            else
-               exc.retval = HUGE_VAL;
-	    if(floor(x)==x&&x<=0.0) {
-		/* lgamma(-integer) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		   errno = EDOM;
-		else if (!matherr(&exc)) {
-		   errno = EDOM;
-		}
-
-            } else {
-		/* lgamma(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		   errno = ERANGE;
-                else if (!matherr(&exc)) {
-                   errno = ERANGE;
-		}
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-        } else
-            return y;
-#endif
-}             
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
-
-
-
diff --git a/newlib/libm/math/w_log.c b/newlib/libm/math/w_log.c
deleted file mode 100644
index dcc8b9762..000000000
--- a/newlib/libm/math/w_log.c
+++ /dev/null
@@ -1,115 +0,0 @@
-
-/* @(#)w_log.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-       <<log>>, <<logf>>---natural logarithms
-
-INDEX
-    log
-INDEX
-    logf
-
-ANSI_SYNOPSIS
-       #include <math.h>
-       double log(double <[x]>);
-       float logf(float <[x]>);
-
-TRAD_SYNOPSIS
-       #include <math.h>
-       double log(<[x]>);
-       double <[x]>;
-
-       float logf(<[x]>);
-       float <[x]>;
-
-DESCRIPTION
-Return the natural logarithm of <[x]>, that is, its logarithm base e
-(where e is the base of the natural system of logarithms, 2.71828@dots{}).
-<<log>> and <<logf>> are identical save for the return and argument types.
-
-You can use the (non-ANSI) function <<matherr>> to specify error
-handling for these functions. 
-
-RETURNS
-Normally, returns the calculated value.  When <[x]> is zero, the
-returned value is <<-HUGE_VAL>> and <<errno>> is set to <<ERANGE>>.
-When <[x]> is negative, the returned value is <<-HUGE_VAL>> and
-<<errno>> is set to <<EDOM>>.  You can control the error behavior via
-<<matherr>>.
-
-PORTABILITY
-<<log>> is ANSI, <<logf>> is an extension.
-*/
-
-/*
- * wrapper log(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double log(double x)		/* wrapper log */
-#else
-	double log(x)			/* wrapper log */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_log(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_log(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) || x > 0.0) return z;
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	exc.name = "log";
-	exc.err = 0;
-	exc.arg1 = x;
-	exc.arg2 = x;
-	if (_LIB_VERSION == _SVID_)
-           exc.retval = -HUGE;
-	else
-	   exc.retval = -HUGE_VAL;
-	if(x==0.0) {
-	    /* log(0) */
-	    exc.type = SING;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	} else { 
-	    /* log(x<0) */
-	    exc.type = DOMAIN;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-        }
-	if (exc.err != 0)
-           errno = exc.err;
-        return exc.retval; 
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_log10.c b/newlib/libm/math/w_log10.c
deleted file mode 100644
index f427b86cc..000000000
--- a/newlib/libm/math/w_log10.c
+++ /dev/null
@@ -1,115 +0,0 @@
-
-/* @(#)w_log10.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<log10>>, <<log10f>>---base 10 logarithms
-
-INDEX
-log10
-INDEX
-log10f
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double log10(double <[x]>);
-	float log10f(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double log10(<[x]>)
-	double <[x]>;
-
-	float log10f(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-<<log10>> returns the base 10 logarithm of <[x]>.
-It is implemented as <<log(<[x]>) / log(10)>>.
-
-<<log10f>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-<<log10>> and <<log10f>> return the calculated value. 
-
-See the description of <<log>> for information on errors.
-
-PORTABILITY
-<<log10>> is ANSI C.  <<log10f>> is an extension.
-
- */
-
-/* 
- * wrapper log10(X)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double log10(double x)		/* wrapper log10 */
-#else
-	double log10(x)			/* wrapper log10 */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_log10(x);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_log10(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(x<=0.0) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "log10";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-               exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if(x==0.0) {
-	        /* log10(0) */
-	        exc.type = SING;
-	        if (_LIB_VERSION == _POSIX_)
-	           errno = ERANGE;
-	        else if (!matherr(&exc)) {
-	           errno = EDOM;
-	        }
-	    } else { 
-	        /* log10(x<0) */
-	        exc.type = DOMAIN;
-	        if (_LIB_VERSION == _POSIX_)
-	           errno = EDOM;
-	        else if (!matherr(&exc)) {
-	           errno = EDOM;
-	        }
-            }
-	    if (exc.err != 0)
-               errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_pow.c b/newlib/libm/math/w_pow.c
deleted file mode 100644
index d54cd3adb..000000000
--- a/newlib/libm/math/w_pow.c
+++ /dev/null
@@ -1,231 +0,0 @@
-
-
-/* @(#)w_pow.c 5.2 93/10/01 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<pow>>, <<powf>>---x to the power y
-INDEX
-	pow
-INDEX
-	powf
-
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double pow(double <[x]>, double <[y]>);
-	float pow(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double pow(<[x]>, <[y]>);
-	double <[x]>, <[y]>;
-
-	float pow(<[x]>, <[y]>);
-	float <[x]>, <[y]>;
-
-DESCRIPTION
-	<<pow>> and <<powf>> calculate <[x]> raised to the exponent <[y]>.
-	@tex
-	(That is, $x^y$.)
-	@end tex
-
-RETURNS
-	On success, <<pow>> and <<powf>> return the value calculated.
-
-	When the argument values would produce overflow, <<pow>>
-	returns <<HUGE_VAL>> and set <<errno>> to <<ERANGE>>.  If the
-	argument <[x]> passed to <<pow>> or <<powf>> is a negative
-	noninteger, and <[y]> is also not an integer, then <<errno>>
-	is set to <<EDOM>>.  If <[x]> and <[y]> are both 0, then
-	<<pow>> and <<powf>> return <<1>>.
-
-	You can modify error handling for these functions using <<matherr>>.
-
-PORTABILITY
-	<<pow>> is ANSI C. <<powf>> is an extension.  */
-
-/* 
- * wrapper pow(x,y) return x**y
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double pow(double x, double y)	/* wrapper pow */
-#else
-	double pow(x,y)			/* wrapper pow */
-	double x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return  __ieee754_pow(x,y);
-#else
-	double z;
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	struct exception exc;
-	z=__ieee754_pow(x,y);
-	if(_LIB_VERSION == _IEEE_|| isnan(y)) return z;
-	if(isnan(x)) {
-	    if(y==0.0) { 
-		/* pow(NaN,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ & _XOPEN_ */
-		exc.type = DOMAIN;
-		exc.name = "pow";
-		exc.err = 0;
-		exc.arg1 = x;
-		exc.arg2 = y;
-		exc.retval = x;
-		if (_LIB_VERSION == _IEEE_ ||
-		    _LIB_VERSION == _POSIX_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-			errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return exc.retval; 
-	    } else 
-		return z;
-	}
-	if(x==0.0){ 
-	    if(y==0.0) {
-		/* pow(0.0,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ */
-		exc.type = DOMAIN;
-		exc.name = "pow";
-		exc.err = 0;
-		exc.arg1 = x;
-		exc.arg2 = y;
-		exc.retval = 0.0;
-		if (_LIB_VERSION != _SVID_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-			errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return exc.retval; 
-	    }
-            if(finite(y)&&y<0.0) {
-		/* 0**neg */
-		exc.type = DOMAIN;
-		exc.name = "pow";
-		exc.err = 0;
-		exc.arg1 = x;
-		exc.arg2 = y;
-		if (_LIB_VERSION == _SVID_) 
-		  exc.retval = 0.0;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return exc.retval; 
-            } 
-	    return z;
-	}
-	if(!finite(z)) {
-	    if(finite(x)&&finite(y)) {
-	        if(isnan(z)) {
-		    /* neg**non-integral */
-		    exc.type = DOMAIN;
-		    exc.name = "pow";
-		    exc.err = 0;
-		    exc.arg1 = x;
-		    exc.arg2 = y;
-		    if (_LIB_VERSION == _SVID_) 
-		        exc.retval = 0.0;
-		    else 
-		        exc.retval = 0.0/0.0;	/* X/Open allow NaN */
-		    if (_LIB_VERSION == _POSIX_) 
-		        errno = EDOM;
-		    else if (!matherr(&exc)) {
-		        errno = EDOM;
-		    }
-	            if (exc.err != 0)
-	                errno = exc.err;
-                    return exc.retval; 
-	        } else {
-		    /* pow(x,y) overflow */
-		    exc.type = OVERFLOW;
-		    exc.name = "pow";
-		    exc.err = 0;
-		    exc.arg1 = x;
-		    exc.arg2 = y;
-		    if (_LIB_VERSION == _SVID_) {
-		       exc.retval = HUGE;
-		       y *= 0.5;
-		       if(x<0.0&&rint(y)!=y) exc.retval = -HUGE;
-		    } else {
-		       exc.retval = HUGE_VAL;
-                       y *= 0.5;
-		       if(x<0.0&&rint(y)!=y) exc.retval = -HUGE_VAL;
-		    }
-		    if (_LIB_VERSION == _POSIX_)
-		        errno = ERANGE;
-		    else if (!matherr(&exc)) {
-			errno = ERANGE;
-		    }
-	            if (exc.err != 0)
-	                errno = exc.err;
-                    return exc.retval; 
-                }
-	    }
-	} 
-	if(z==0.0&&finite(x)&&finite(y)) {
-	    /* pow(x,y) underflow */
-	    exc.type = UNDERFLOW;
-	    exc.name = "pow";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = y;
-	    exc.retval =  0.0;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	     	errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	        errno = exc.err;
-            return exc.retval; 
-        } 
-	return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/newlib/libm/math/w_remainder.c b/newlib/libm/math/w_remainder.c
deleted file mode 100644
index e4c196716..000000000
--- a/newlib/libm/math/w_remainder.c
+++ /dev/null
@@ -1,108 +0,0 @@
-
-/* @(#)w_remainder.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<remainder>>, <<remainderf>>---round and  remainder
-INDEX
-	remainder
-INDEX
-	remainderf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double remainder(double <[x]>, double <[y]>);
-	float remainderf(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double remainder(<[x]>,<[y]>)
-	double <[x]>, <[y]>;
-	float remainderf(<[x]>,<[y]>)
-	float <[x]>, <[y]>;
-
-DESCRIPTION
-<<remainder>> and <<remainderf>> find the remainder of
-<[x]>/<[y]>; this value is in the range -<[y]>/2 .. +<[y]>/2.
-
-RETURNS
-<<remainder>> returns the integer result as a double.
-
-PORTABILITY
-<<remainder>> is a System V release 4.
-<<remainderf>> is an extension.
-
-*/
-
-/* 
- * wrapper remainder(x,p)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double remainder(double x, double y)	/* wrapper remainder */
-#else
-	double remainder(x,y)			/* wrapper remainder */
-	double x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_remainder(x,y);
-#else
-	double z;
-	struct exception exc;
-	z = __ieee754_remainder(x,y);
-	if(_LIB_VERSION == _IEEE_ || isnan(y)) return z;
-	if(y==0.0) { 
-            /* remainder(x,0) */
-            exc.type = DOMAIN;
-            exc.name = "remainder";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = y;
-            exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-               errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/newlib/libm/math/w_scalb.c b/newlib/libm/math/w_scalb.c
deleted file mode 100644
index c32496892..000000000
--- a/newlib/libm/math/w_scalb.c
+++ /dev/null
@@ -1,94 +0,0 @@
-
-/* @(#)w_scalb.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper scalb(double x, double fn) is provide for
- * passing various standard test suite. One 
- * should use scalbn() instead.
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-#ifdef _SCALB_INT
-	double scalb(double x, int fn)		/* wrapper scalb */
-#else
-	double scalb(double x, double fn)	/* wrapper scalb */
-#endif
-#else
-	double scalb(x,fn)			/* wrapper scalb */
-#ifdef _SCALB_INT
-	double x; int fn;
-#else
-	double x,fn;
-#endif
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_scalb(x,fn);
-#else
-	double z;
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	struct exception exc;
-	z = __ieee754_scalb(x,fn);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(!(finite(z)||isnan(z))&&finite(x)) {
-	    /* scalb overflow; SVID also returns +-HUGE_VAL */
-	    exc.type = OVERFLOW;
-	    exc.name = "scalb";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = fn;
-	    exc.retval = x > 0.0 ? HUGE_VAL : -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval;
-	}
-	if(z==0.0&&z!=x) {
-	    /* scalb underflow */
-	    exc.type = UNDERFLOW;
-	    exc.name = "scalb";
-	    exc.err = 0;
-	    exc.arg1 = x;
-	    exc.arg2 = fn;
-	    exc.retval = copysign(0.0,x);
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} 
-#ifndef _SCALB_INT
-	if(!finite(fn)) errno = ERANGE;
-#endif
-	return z;
-#endif 
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_sincos.c b/newlib/libm/math/w_sincos.c
deleted file mode 100644
index 491efa418..000000000
--- a/newlib/libm/math/w_sincos.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* sincos -- currently no more efficient than two separate calls to
-   sin and cos. */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	void sincos(double x, double *sinx, double *cosx)
-#else
-	void sincos(x, sinx, cosx)
-	double x;
-        double *sinx;
-        double *cosx;
-#endif
-{
-  *sinx = sin (x);
-  *cosx = cos (x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_sinh.c b/newlib/libm/math/w_sinh.c
deleted file mode 100644
index 72e0ef51e..000000000
--- a/newlib/libm/math/w_sinh.c
+++ /dev/null
@@ -1,120 +0,0 @@
-
-/* @(#)w_sinh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-
-/*
-FUNCTION
-        <<sinh>>, <<sinhf>>---hyperbolic sine
-
-INDEX
-	sinh
-INDEX
-	sinhf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double sinh(double <[x]>);
-        float  sinhf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double sinh(<[x]>)
-        double <[x]>;
-
-        float  sinhf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-	<<sinh>> computes the hyperbolic sine of the argument <[x]>.
-	Angles are specified in radians.   <<sinh>>(<[x]>) is defined as 
-	@ifnottex
-	. (exp(<[x]>) - exp(-<[x]>))/2
-	@end ifnottex
-	@tex
-	$${e^x - e^{-x}}\over 2$$
-	@end tex
-
-	<<sinhf>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-	The hyperbolic sine of <[x]> is returned.  
-
-	When the correct result is too large to be representable (an
-	overflow),  <<sinh>> returns <<HUGE_VAL>> with the
-	appropriate sign, and sets the global value <<errno>> to
-	<<ERANGE>>. 
-
-	You can modify error handling for these functions with <<matherr>>.
-
-PORTABILITY
-	<<sinh>> is ANSI C.  
-	<<sinhf>> is an extension.
-
-QUICKREF
-	sinh ansi pure
-	sinhf - pure
-*/
-
-/* 
- * wrapper sinh(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sinh(double x)		/* wrapper sinh */
-#else
-	double sinh(x)			/* wrapper sinh */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_sinh(x);
-#else
-	double z; 
-	struct exception exc;
-	z = __ieee754_sinh(x);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(!finite(z)&&finite(x)) {
-	    /* sinh(finite) overflow */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-	    
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "sinh";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = ( (x>0.0) ? HUGE : -HUGE);
-	    else
-	       exc.retval = ( (x>0.0) ? HUGE_VAL : -HUGE_VAL);
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval;
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_sqrt.c b/newlib/libm/math/w_sqrt.c
deleted file mode 100644
index 23a793ce7..000000000
--- a/newlib/libm/math/w_sqrt.c
+++ /dev/null
@@ -1,93 +0,0 @@
-
-/* @(#)w_sqrt.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<sqrt>>, <<sqrtf>>---positive square root
-
-INDEX
-	sqrt
-INDEX
-	sqrtf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double sqrt(double <[x]>);
-	float  sqrtf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double sqrt(<[x]>);
-	float  sqrtf(<[x]>);
-
-DESCRIPTION
-	<<sqrt>> computes the positive square root of the argument.
-	You can modify error handling for this function with
-	<<matherr>>.
-
-RETURNS
-	On success, the square root is returned. If <[x]> is real and
-	positive, then the result is positive.  If <[x]> is real and
-	negative, the global value <<errno>> is set to <<EDOM>> (domain error).
-
-
-PORTABILITY
-	<<sqrt>> is ANSI C.  <<sqrtf>> is an extension.
-*/
-
-/* 
- * wrapper sqrt(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sqrt(double x)		/* wrapper sqrt */
-#else
-	double sqrt(x)			/* wrapper sqrt */
-	double x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_sqrt(x);
-#else
-	struct exception exc;
-	double z;
-	z = __ieee754_sqrt(x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x)) return z;
-	if(x<0.0) {
-	  exc.type = DOMAIN;
-	  exc.name = "sqrt";
-	  exc.err = 0;
-	  exc.arg1 = exc.arg2 = x;
-	  if (_LIB_VERSION == _SVID_)
-	    exc.retval = 0.0;
-          else
-            exc.retval = 0.0/0.0;
-          if (_LIB_VERSION == _POSIX_)
-            errno = EDOM;
-          else if (!matherr(&exc)) {
-            errno = EDOM;
-          }
-          if (exc.err != 0)
-	    errno = exc.err;
-	  return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/w_tgamma.c b/newlib/libm/math/w_tgamma.c
deleted file mode 100644
index f24a243bf..000000000
--- a/newlib/libm/math/w_tgamma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* @(#)w_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-/* double gamma(double x)
- * Return  the logarithm of the Gamma function of x or the Gamma function of x,
- * depending on the library mode.
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	double tgamma(double x)
-#else
-	double tgamma(x)
-	double x;
-#endif
-{
-        double y;
-	int local_signgam;
-	y = __ieee754_gamma_r(x,&local_signgam);
-	if (local_signgam < 0) y = -y;
-#ifdef _IEEE_LIBM
-	return y;
-#else
-	if(_LIB_VERSION == _IEEE_) return y;
-
-	if(!finite(y)&&finite(x)) {
-	  if(floor(x)==x&&x<=0.0)
-	    return __kernel_standard(x,x,41); /* tgamma pole */
-	  else
-	    return __kernel_standard(x,x,40); /* tgamma overflow */
-	}
-	return y;
-#endif
-}
diff --git a/newlib/libm/math/wf_acos.c b/newlib/libm/math/wf_acos.c
deleted file mode 100644
index 8a1037441..000000000
--- a/newlib/libm/math/wf_acos.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* wf_acos.c -- float version of w_acos.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrap_acosf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef _HAVE_STDC
-	float acosf(float x)		/* wrapper acosf */
-#else
-	float acosf(x)			/* wrapper acosf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_acosf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_acosf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(fabsf(x)>(float)1.0) {
-	    /* acosf(|x|>1) */
-	    exc.type = DOMAIN;
-	    exc.name = "acosf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    exc.retval = 0.0;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-            }
-            if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double acos(double x)
-#else
-	double acos(x)
-	double x;
-#endif
-{
-	return (double) acosf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_acosh.c b/newlib/libm/math/wf_acosh.c
deleted file mode 100644
index 19c2450e6..000000000
--- a/newlib/libm/math/wf_acosh.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* wf_acosh.c -- float version of w_acosh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* 
- * wrapper acoshf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float acoshf(float x)		/* wrapper acoshf */
-#else
-	float acoshf(x)			/* wrapper acoshf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_acoshf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_acoshf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(x<(float)1.0) {
-            /* acoshf(x<1) */
-            exc.type = DOMAIN;
-            exc.name = "acoshf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-               errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double acosh(double x)
-#else
-	double acosh(x)
-	double x;
-#endif
-{
-	return (double) acoshf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_asin.c b/newlib/libm/math/wf_asin.c
deleted file mode 100644
index a5225f2f4..000000000
--- a/newlib/libm/math/wf_asin.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* wf_asin.c -- float version of w_asin.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* 
- * wrapper asinf(x)
- */
-
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float asinf(float x)		/* wrapper asinf */
-#else
-	float asinf(x)			/* wrapper asinf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_asinf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_asinf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(fabsf(x)>(float)1.0) {
-	    /* asinf(|x|>1) */
-	    exc.type = DOMAIN;
-	    exc.name = "asinf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    exc.retval = 0.0;
-	    if(_LIB_VERSION == _POSIX_)
-	      errno = EDOM;
-	    else if (!matherr(&exc)) {
-	      errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	      errno = exc.err;
-	    return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double asin(double x)
-#else
-	double asin(x)
-	double x;
-#endif
-{
-	return (double) asinf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_atan2.c b/newlib/libm/math/wf_atan2.c
deleted file mode 100644
index 069a7ca13..000000000
--- a/newlib/libm/math/wf_atan2.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* wf_atan2.c -- float version of w_atan2.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* 
- * wrapper atan2f(y,x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float atan2f(float y, float x)		/* wrapper atan2f */
-#else
-	float atan2f(y,x)			/* wrapper atan2 */
-	float y,x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_atan2f(y,x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_atan2f(y,x);
-	if(_LIB_VERSION == _IEEE_||isnanf(x)||isnanf(y)) return z;
-	if(x==(float)0.0&&y==(float)0.0) {
-	    /* atan2f(+-0,+-0) */
-	    exc.arg1 = y;
-	    exc.arg2 = x;
-	    exc.err = 0;
-	    exc.type = DOMAIN;
-	    exc.name = "atan2f";
-	    exc.retval = 0.0;
-	    if(_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval;
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double atan2(double y, double x)
-#else
-	double atan2(y,x)
-	double y,x;
-#endif
-{
-	return (double) atan2f((float) y, (float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_atanh.c b/newlib/libm/math/wf_atanh.c
deleted file mode 100644
index 457cdc6e2..000000000
--- a/newlib/libm/math/wf_atanh.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* wf_atanh.c -- float version of w_atanh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-/* 
- * wrapper atanhf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float atanhf(float x)		/* wrapper atanhf */
-#else
-	float atanhf(x)			/* wrapper atanhf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_atanhf(x);
-#else
-	float z,y;
-	struct exception exc;
-	z = __ieee754_atanhf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	y = fabsf(x);
-	if(y>=(float)1.0) {
-	    if(y>(float)1.0) {
-                /* atanhf(|x|>1) */
-                exc.type = DOMAIN;
-                exc.name = "atanhf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-                exc.retval = 0.0/0.0;
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  errno = EDOM;
-                }
-	    } else { 
-                /* atanhf(|x|=1) */
-                exc.type = SING;
-                exc.name = "atanhf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-		exc.retval = x/0.0;	/* sign(x)*inf */
-                if (_LIB_VERSION == _POSIX_)
-                  errno = EDOM;
-                else if (!matherr(&exc)) {
-                  errno = EDOM;
-                }
-            }
-	    if (exc.err != 0)
-              errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double atanh(double x)
-#else
-	double atanh(x)
-	double x;
-#endif
-{
-	return (double) atanhf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_cabs.c b/newlib/libm/math/wf_cabs.c
deleted file mode 100644
index c3ed0caa2..000000000
--- a/newlib/libm/math/wf_cabs.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * cabsf() wrapper for hypotf().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-struct complex {
-	float x;
-	float y;
-};
-
-float
-cabsf(z)
-	struct complex z;
-{
-	return hypotf(z.x, z.y);
-}
diff --git a/newlib/libm/math/wf_cosh.c b/newlib/libm/math/wf_cosh.c
deleted file mode 100644
index 82b76f3c4..000000000
--- a/newlib/libm/math/wf_cosh.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* wf_cosh.c -- float version of w_cosh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper coshf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float coshf(float x)		/* wrapper coshf */
-#else
-	float coshf(x)			/* wrapper coshf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_coshf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_coshf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(fabsf(x)>(float)8.9415985107e+01) {	
-	    /* coshf(finite) overflow */
-#ifndef HUGE_VAL
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "coshf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = HUGE;
-	    else
-	       exc.retval = HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval;
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double cosh(double x)
-#else
-	double cosh(x)
-	double x;
-#endif
-{
-	return (double) coshf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_drem.c b/newlib/libm/math/wf_drem.c
deleted file mode 100644
index 7c3f7c58e..000000000
--- a/newlib/libm/math/wf_drem.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * dremf() wrapper for remainderf().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-float
-#ifdef __STDC__
-dremf(float x, float y)
-#else
-dremf(x, y)
-	float x, y;
-#endif
-{
-	return remainderf(x, y);
-}
diff --git a/newlib/libm/math/wf_exp.c b/newlib/libm/math/wf_exp.c
deleted file mode 100644
index 70f4459b4..000000000
--- a/newlib/libm/math/wf_exp.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* wf_exp.c -- float version of w_exp.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper expf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-o_threshold=  8.8721679688e+01,  /* 0x42b17180 */
-u_threshold= -1.0397208405e+02;  /* 0xc2cff1b5 */
-
-#ifdef __STDC__
-	float expf(float x)		/* wrapper expf */
-#else
-	float expf(x)			/* wrapper expf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_expf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_expf(x);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(finitef(x)) {
-	    if(x>o_threshold) {
-		/* expf(finite) overflow */
-#ifndef HUGE_VAL
-#define HUGE_VAL inf
-	        double inf = 0.0;
-
-	        SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-		exc.type = OVERFLOW;
-		exc.name = "expf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-		if (_LIB_VERSION == _SVID_)
-		  exc.retval = HUGE;
-		else
-		  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-	        return exc.retval; 
-	    } else if(x<u_threshold) {
-		/* expf(finite) underflow */
-		exc.type = UNDERFLOW;
-		exc.name = "expf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-		exc.retval = 0.0;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-		else if (!matherr(&exc)) {
-			errno = ERANGE;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-	        return exc.retval; 
-	    } 
-	} 
-	return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double exp(double x)
-#else
-	double exp(x)
-	double x;
-#endif
-{
-	return (double) expf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_exp2.c b/newlib/libm/math/wf_exp2.c
deleted file mode 100644
index 944031405..000000000
--- a/newlib/libm/math/wf_exp2.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* wf_exp2.c -- float version of w_exp2.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper exp2f(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-#include <math.h>
-
-#ifdef __STDC__
-	float exp2f(float x)		/* wrapper exp2f */
-#else
-	float exp2f(x)			/* wrapper exp2f */
-	float x;
-#endif
-{
-  return powf(2.0, x);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double exp2(double x)
-#else
-	double exp2(x)
-	double x;
-#endif
-{
-	return (double) exp2f((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_fmod.c b/newlib/libm/math/wf_fmod.c
deleted file mode 100644
index 320daabde..000000000
--- a/newlib/libm/math/wf_fmod.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* wf_fmod.c -- float version of w_fmod.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper fmodf(x,y)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float fmodf(float x, float y)	/* wrapper fmodf */
-#else
-	float fmodf(x,y)		/* wrapper fmodf */
-	float x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_fmodf(x,y);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_fmodf(x,y);
-	if(_LIB_VERSION == _IEEE_ ||isnanf(y)||isnanf(x)) return z;
-	if(y==(float)0.0) {
-            /* fmodf(x,0) */
-            exc.type = DOMAIN;
-            exc.name = "fmodf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)y;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = x;
-	    else
-	       exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-                  errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double fmod(double x, double y)
-#else
-	double fmod(x,y)
-	double x,y;
-#endif
-{
-	return (double) fmodf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_gamma.c b/newlib/libm/math/wf_gamma.c
deleted file mode 100644
index 1204f3999..000000000
--- a/newlib/libm/math/wf_gamma.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* wf_gamma.c -- float version of w_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-#include <reent.h>
-#include <errno.h>
-
-#ifdef __STDC__
-	float gammaf(float x)
-#else
-	float gammaf(x)
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_gammaf_r(x,&(_REENT_SIGNGAM(_REENT)));
-#else
-        float y;
-	struct exception exc;
-        y = __ieee754_gammaf_r(x,&(_REENT_SIGNGAM(_REENT)));
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finitef(y)&&finitef(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    if(floorf(x)==x&&x<=(float)0.0) {
-		/* gammaf(-integer) or gammaf(0) */
-		exc.type = SING;
-		exc.name = "gammaf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-            } else {
-		/* gammaf(finite) overflow */
-		exc.type = OVERFLOW;
-		exc.name = "gammaf";
-		exc.err = 0;
-		exc.arg1 = exc.arg2 = (double)x;
-                if (_LIB_VERSION == _SVID_)
-                  exc.retval = HUGE;
-                else
-                  exc.retval = HUGE_VAL;
-                if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-                else if (!matherr(&exc)) {
-                  errno = ERANGE;
-                }
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval; 
-        } else
-            return y;
-#endif
-}             
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double gamma(double x)
-#else
-	double gamma(x)
-	double x;
-#endif
-{
-	return (double) gammaf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_hypot.c b/newlib/libm/math/wf_hypot.c
deleted file mode 100644
index c04ace110..000000000
--- a/newlib/libm/math/wf_hypot.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* wf_hypot.c -- float version of w_hypot.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper hypotf(x,y)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float hypotf(float x, float y)	/* wrapper hypotf */
-#else
-	float hypotf(x,y)		/* wrapper hypotf */
-	float x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_hypotf(x,y);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_hypotf(x,y);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if((!finitef(z))&&finitef(x)&&finitef(y)) {
-	    /* hypotf(finite,finite) overflow */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "hypotf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)y;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = HUGE;
-	    else
-	       exc.retval = HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	     	errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval;
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double hypot(double x, double y)
-#else
-	double hypot(x,y)
-	double x,y;
-#endif
-{
-	return (double) hypotf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_j0.c b/newlib/libm/math/wf_j0.c
deleted file mode 100644
index 0f3a7c1c6..000000000
--- a/newlib/libm/math/wf_j0.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* wf_j0.c -- float version of w_j0.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper j0f(float x), y0f(float x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float j0f(float x)		/* wrapper j0f */
-#else
-	float j0f(x)			/* wrapper j0f */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_j0f(x);
-#else
-	struct exception exc;
-	float z = __ieee754_j0f(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(fabsf(x)>(float)X_TLOSS) {
-	    /* j0f(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "j0f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	float y0f(float x)		/* wrapper y0f */
-#else
-	float y0f(x)			/* wrapper y0f */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_y0f(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_y0f(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-        if(x <= (float)0.0){
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    /* y0f(0) = -inf  or y0f(x<0) = NaN */
-	    exc.type = DOMAIN;	/* should be SING for IEEE y0f(0) */
-	    exc.name = "y0f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-        }
-	if(x>(float)X_TLOSS) {
-	    /* y0f(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "y0f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double j0(double x)
-#else
-	double j0(x)
-	double x;
-#endif
-{
-	return (double) j0f((float) x);
-}
-
-#ifdef __STDC__
-	double y0(double x)
-#else
-	double y0(x)
-	double x;
-#endif
-{
-	return (double) y0f((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_j1.c b/newlib/libm/math/wf_j1.c
deleted file mode 100644
index f9d3e0ed8..000000000
--- a/newlib/libm/math/wf_j1.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* wf_j1.c -- float version of w_j1.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper of j1f,y1f 
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-
-#ifdef __STDC__
-	float j1f(float x)		/* wrapper j1f */
-#else
-	float j1f(x)			/* wrapper j1f */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_j1f(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_j1f(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-	if(fabsf(x)>(float)X_TLOSS) {
-	    /* j1f(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "j1f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	float y1f(float x)		/* wrapper y1f */
-#else
-	float y1f(x)			/* wrapper y1f */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_y1f(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_y1f(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-        if(x <= (float)0.0){
-	    /* y1f(0) = -inf or y1f(x<0) = NaN */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "y1f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval;              
-        }
-	if(x>(float)X_TLOSS) {
-	    /* y1f(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "y1f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double j1(double x)
-#else
-	double j1(x)
-	double x;
-#endif
-{
-	return (double) j1f((float) x);
-}
-
-#ifdef __STDC__
-	double y1(double x)
-#else
-	double y1(x)
-	double x;
-#endif
-{
-	return (double) y1f((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_jn.c b/newlib/libm/math/wf_jn.c
deleted file mode 100644
index c3a52630b..000000000
--- a/newlib/libm/math/wf_jn.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/* wf_jn.c -- float version of w_jn.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-
-#ifdef __STDC__
-	float jnf(int n, float x)	/* wrapper jnf */
-#else
-	float jnf(n,x)			/* wrapper jnf */
-	float x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_jnf(n,x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_jnf(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-	if(fabsf(x)>(float)X_TLOSS) {
-	    /* jnf(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "jnf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	float ynf(int n, float x)	/* wrapper ynf */
-#else
-	float ynf(n,x)			/* wrapper ynf */
-	float x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_ynf(n,x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_ynf(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-        if(x <= (float)0.0){
-	    /* ynf(n,0) = -inf or ynf(x<0) = NaN */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "ynf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	        exc.retval = -HUGE;
-	    else
-	        exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = EDOM;
-	    else if (!matherr(&exc)) {
-	        errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-        }
-	if(x>(float)X_TLOSS) {
-	    /* ynf(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "ynf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double jn(int n, double x)
-#else
-	double jn(n,x)
-	double x; int n;
-#endif
-{
-	return (double) jnf(n, (float) x);
-}
-
-#ifdef __STDC__
-	double yn(int n, double x)
-#else
-	double yn(n,x)
-	double x; int n;
-#endif
-{
-	return (double) ynf(n, (float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_lgamma.c b/newlib/libm/math/wf_lgamma.c
deleted file mode 100644
index f1bf0c019..000000000
--- a/newlib/libm/math/wf_lgamma.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* wf_lgamma.c -- float version of w_lgamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-#include <reent.h>
-#include <errno.h>
-
-#ifdef __STDC__
-	float lgammaf(float x)
-#else
-	float lgammaf(x)
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_lgammaf_r(x,&(_REENT_SIGNGAM(_REENT)));
-#else
-        float y;
-	struct exception exc;
-        y = __ieee754_lgammaf_r(x,&(_REENT_SIGNGAM(_REENT)));
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finitef(y)&&finitef(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "lgammaf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = HUGE;
-            else
-               exc.retval = HUGE_VAL;
-	    if(floorf(x)==x&&x<=(float)0.0) {
-		/* lgammaf(-integer) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		   errno = EDOM;
-		else if (!matherr(&exc)) {
-		   errno = EDOM;
-		}
-
-            } else {
-		/* lgammaf(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		   errno = ERANGE;
-                else if (!matherr(&exc)) {
-                   errno = ERANGE;
-		}
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-        } else
-            return y;
-#endif
-}             
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double lgamma(double x)
-#else
-	double lgamma(x)
-	double x;
-#endif
-{
-	return (double) lgammaf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_log.c b/newlib/libm/math/wf_log.c
deleted file mode 100644
index cd373b402..000000000
--- a/newlib/libm/math/wf_log.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* wf_log.c -- float version of w_log.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper logf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float logf(float x)		/* wrapper logf */
-#else
-	float logf(x)			/* wrapper logf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_logf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_logf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) || x > (float)0.0) return z;
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	exc.name = "logf";
-	exc.err = 0;
-	exc.arg1 = exc.arg2 = (double)x;
-	if (_LIB_VERSION == _SVID_)
-           exc.retval = -HUGE;
-	else
-	   exc.retval = -HUGE_VAL;
-	if(x==(float)0.0) {
-	    /* logf(0) */
-	    exc.type = SING;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-	} else { 
-	    /* logf(x<0) */
-	    exc.type = DOMAIN;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = EDOM;
-	    else if (!matherr(&exc)) {
-	       errno = EDOM;
-	    }
-        }
-	if (exc.err != 0)
-           errno = exc.err;
-        return (float)exc.retval; 
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double log(double x)
-#else
-	double log(x)
-	double x;
-#endif
-{
-	return (double) logf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_log10.c b/newlib/libm/math/wf_log10.c
deleted file mode 100644
index 15fa5d939..000000000
--- a/newlib/libm/math/wf_log10.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* wf_log10.c -- float version of w_log10.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper log10f(X)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float log10f(float x)		/* wrapper log10f */
-#else
-	float log10f(x)			/* wrapper log10f */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_log10f(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_log10f(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(x<=(float)0.0) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "log10f";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-               exc.retval = -HUGE;
-	    else
-	       exc.retval = -HUGE_VAL;
-	    if(x==(float)0.0) {
-	        /* log10f(0) */
-	        exc.type = SING;
-	        if (_LIB_VERSION == _POSIX_)
-	           errno = ERANGE;
-	        else if (!matherr(&exc)) {
-	           errno = EDOM;
-	        }
-	    } else { 
-	        /* log10f(x<0) */
-	        exc.type = DOMAIN;
-	        if (_LIB_VERSION == _POSIX_)
-	           errno = EDOM;
-	        else if (!matherr(&exc)) {
-	           errno = EDOM;
-	        }
-            }
-	    if (exc.err != 0)
-               errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double log10(double x)
-#else
-	double log10(x)
-	double x;
-#endif
-{
-	return (double) log10f((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_pow.c b/newlib/libm/math/wf_pow.c
deleted file mode 100644
index 42655da4a..000000000
--- a/newlib/libm/math/wf_pow.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* wf_pow.c -- float version of w_pow.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper powf(x,y) return x**y
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float powf(float x, float y)	/* wrapper powf */
-#else
-	float powf(x,y)			/* wrapper powf */
-	float x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return  __ieee754_powf(x,y);
-#else
-	float z;
-	struct exception exc;
-	z=__ieee754_powf(x,y);
-	if(_LIB_VERSION == _IEEE_|| isnanf(y)) return z;
-	if(isnanf(x)) {
-	    if(y==(float)0.0) { 
-		/* powf(NaN,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ & _XOPEN_ */
-		exc.type = DOMAIN;
-		exc.name = "powf";
-		exc.err = 0;
-		exc.arg1 = (double)x;
-		exc.arg2 = (double)y;
-		exc.retval = x;
-		if (_LIB_VERSION == _IEEE_ ||
-		    _LIB_VERSION == _POSIX_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-			errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return (float)exc.retval; 
-	    } else 
-		return z;
-	}
-	if(x==(float)0.0){ 
-	    if(y==(float)0.0) {
-		/* powf(0.0,0.0) */
-		/* error only if _LIB_VERSION == _SVID_ */
-		exc.type = DOMAIN;
-		exc.name = "powf";
-		exc.err = 0;
-		exc.arg1 = (double)x;
-		exc.arg2 = (double)y;
-		exc.retval = 0.0;
-		if (_LIB_VERSION != _SVID_) exc.retval = 1.0;
-		else if (!matherr(&exc)) {
-			errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return (float)exc.retval; 
-	    }
-	    if(finitef(y)&&y<(float)0.0) {
-		/* 0**neg */
-		exc.type = DOMAIN;
-		exc.name = "powf";
-		exc.err = 0;
-		exc.arg1 = (double)x;
-		exc.arg2 = (double)y;
-		if (_LIB_VERSION == _SVID_) 
-		  exc.retval = 0.0;
-		else
-		  exc.retval = -HUGE_VAL;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-	        if (exc.err != 0)
-	           errno = exc.err;
-                return (float)exc.retval; 
-            }
-	    return z;
-	}
-	if(!finitef(z)) {
-	    if(finitef(x)&&finitef(y)) {
-	        if(isnanf(z)) {
-		    /* neg**non-integral */
-		    exc.type = DOMAIN;
-		    exc.name = "powf";
-		    exc.err = 0;
-		    exc.arg1 = (double)x;
-		    exc.arg2 = (double)y;
-		    if (_LIB_VERSION == _SVID_) 
-		        exc.retval = 0.0;
-		    else 
-		        exc.retval = 0.0/0.0;	/* X/Open allow NaN */
-		    if (_LIB_VERSION == _POSIX_) 
-		        errno = EDOM;
-		    else if (!matherr(&exc)) {
-		        errno = EDOM;
-		    }
-	            if (exc.err != 0)
-	                errno = exc.err;
-                    return (float)exc.retval; 
-	        } else {
-		    /* powf(x,y) overflow */
-		    exc.type = OVERFLOW;
-		    exc.name = "powf";
-		    exc.err = 0;
-		    exc.arg1 = (double)x;
-		    exc.arg2 = (double)y;
-		    if (_LIB_VERSION == _SVID_) {
-		       exc.retval = HUGE;
-		       y *= 0.5;
-		       if(x<0.0&&rint(y)!=y) exc.retval = -HUGE;
-		    } else {
-		       exc.retval = HUGE_VAL;
-                       y *= 0.5;
-		       if(x<0.0&&rint(y)!=y) exc.retval = -HUGE_VAL;
-		    }
-		    if (_LIB_VERSION == _POSIX_)
-		        errno = ERANGE;
-		    else if (!matherr(&exc)) {
-			errno = ERANGE;
-		    }
-	            if (exc.err != 0)
-	                errno = exc.err;
-                    return (float)exc.retval; 
-                }
-	    }
-	} 
-	if(z==(float)0.0&&finitef(x)&&finitef(y)) {
-	    /* powf(x,y) underflow */
-	    exc.type = UNDERFLOW;
-	    exc.name = "powf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)y;
-	    exc.retval =  0.0;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	     	errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	        errno = exc.err;
-            return (float)exc.retval; 
-        }
-	return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double pow(double x, double y)
-#else
-	double pow(x,y)
-	double x,y;
-#endif
-{
-	return (double) powf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_remainder.c b/newlib/libm/math/wf_remainder.c
deleted file mode 100644
index 0071a9772..000000000
--- a/newlib/libm/math/wf_remainder.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* wf_remainder.c -- float version of w_remainder.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper remainderf(x,p)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float remainderf(float x, float y)	/* wrapper remainder */
-#else
-	float remainderf(x,y)			/* wrapper remainder */
-	float x,y;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_remainderf(x,y);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_remainderf(x,y);
-	if(_LIB_VERSION == _IEEE_ || isnanf(y)) return z;
-	if(y==(float)0.0) { 
-            /* remainderf(x,0) */
-            exc.type = DOMAIN;
-            exc.name = "remainderf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)y;
-            exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_)
-               errno = EDOM;
-            else if (!matherr(&exc)) {
-               errno = EDOM;
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double remainder(double x, double y)
-#else
-	double remainder(x,y)
-	double x,y;
-#endif
-{
-	return (double) remainderf((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
-
-
diff --git a/newlib/libm/math/wf_scalb.c b/newlib/libm/math/wf_scalb.c
deleted file mode 100644
index bd2d9f8b4..000000000
--- a/newlib/libm/math/wf_scalb.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* wf_scalb.c -- float version of w_scalb.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * wrapper scalbf(float x, float fn) is provide for
- * passing various standard test suite. One 
- * should use scalbn() instead.
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-#ifdef _SCALB_INT
-	float scalbf(float x, int fn)		/* wrapper scalbf */
-#else
-	float scalbf(float x, float fn)		/* wrapper scalbf */
-#endif
-#else
-	float scalbf(x,fn)			/* wrapper scalbf */
-#ifdef _SCALB_INT
-	float x; int fn;
-#else
-	float x,fn;
-#endif
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_scalbf(x,fn);
-#else
-	float z;
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	double inf = 0.0;
-
-	SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	struct exception exc;
-	z = __ieee754_scalbf(x,fn);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(!(finitef(z)||isnanf(z))&&finitef(x)) {
-	    /* scalbf overflow; SVID also returns +-HUGE_VAL */
-	    exc.type = OVERFLOW;
-	    exc.name = "scalbf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)fn;
-	    exc.retval = x > 0.0 ? HUGE_VAL : -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval;
-	}
-	if(z==(float)0.0&&z!=x) {
-	    /* scalbf underflow */
-	    exc.type = UNDERFLOW;
-	    exc.name = "scalbf";
-	    exc.err = 0;
-	    exc.arg1 = (double)x;
-	    exc.arg2 = (double)fn;
-	    exc.retval = copysign(0.0,x);
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} 
-#ifndef _SCALB_INT
-	if(!finitef(fn)) errno = ERANGE;
-#endif
-	return z;
-#endif 
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-#ifdef _SCALB_INT
-	double scalb(double x, int fn)
-#else 
-	double scalb(double x, double fn)
-#endif
-#else
-	double scalb(x, fn)
-#ifdef _SCALB_INT
-	double x; int fn;
-#else
-	double x,fn;
-#endif
-#endif
-{
-#ifdef _SCALB_INT
-	return (double) scalbf((float) x, fn);
-#else
-	return (double) scalbf((float) x, (float) fn);
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_sincos.c b/newlib/libm/math/wf_sincos.c
deleted file mode 100644
index 477c60401..000000000
--- a/newlib/libm/math/wf_sincos.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* sincos -- currently no more efficient than two separate calls to
-   sin and cos. */
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	void sincosf(float x, float *sinx, float *cosx)
-#else
-	void sincosf(x, sinx, cosx)
-	float x;
-        float *sinx;
-        float *cosx;
-#endif
-{
-  *sinx = sinf (x);
-  *cosx = cosf (x);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	void sincos(double x, double *sinx, double *cosx)
-#else
-	void sincos(x, sinx, cosx)
-	double x;
-        double sinx;
-        double cosx;
-#endif
-{
-  *sinx = sinf((float) x);
-  *cosx = cosf((float) x);
-}
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_sinh.c b/newlib/libm/math/wf_sinh.c
deleted file mode 100644
index 80c7a8e6e..000000000
--- a/newlib/libm/math/wf_sinh.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* wf_sinh.c -- float version of w_sinh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper sinhf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float sinhf(float x)		/* wrapper sinhf */
-#else
-	float sinhf(x)			/* wrapper sinhf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_sinhf(x);
-#else
-	float z; 
-	struct exception exc;
-	z = __ieee754_sinhf(x);
-	if(_LIB_VERSION == _IEEE_) return z;
-	if(!finitef(z)&&finitef(x)) {
-	    /* sinhf(finite) overflow */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-	    
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = OVERFLOW;
-	    exc.name = "sinhf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	       exc.retval = ( (x>0.0) ? HUGE : -HUGE);
-	    else
-	       exc.retval = ( (x>0.0) ? HUGE_VAL : -HUGE_VAL);
-	    if (_LIB_VERSION == _POSIX_)
-	       errno = ERANGE;
-	    else if (!matherr(&exc)) {
-	       errno = ERANGE;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval;
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sinh(double x)
-#else
-	double sinh(x)
-	double x;
-#endif
-{
-	return (double) sinhf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_sqrt.c b/newlib/libm/math/wf_sqrt.c
deleted file mode 100644
index 6e792c923..000000000
--- a/newlib/libm/math/wf_sqrt.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* wf_sqrt.c -- float version of w_sqrt.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper sqrtf(x)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float sqrtf(float x)		/* wrapper sqrtf */
-#else
-	float sqrtf(x)			/* wrapper sqrtf */
-	float x;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_sqrtf(x);
-#else
-	float z;
-	struct exception exc;
-	z = __ieee754_sqrtf(x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x)) return z;
-	if(x<(float)0.0) {
-            /* sqrtf(negative) */
-            exc.type = DOMAIN;
-            exc.name = "sqrtf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-              exc.retval = 0.0;
-            else
-              exc.retval = 0.0/0.0;
-            if (_LIB_VERSION == _POSIX_) 
-              errno = EDOM;
-            else if (!matherr(&exc)) {
-              errno = EDOM;
-            }
-            if (exc.err != 0)
-	      errno = exc.err;
-	    return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double sqrt(double x)
-#else
-	double sqrt(x)
-	double x;
-#endif
-{
-	return (double) sqrtf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wf_tgamma.c b/newlib/libm/math/wf_tgamma.c
deleted file mode 100644
index 642d7c05b..000000000
--- a/newlib/libm/math/wf_tgamma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* w_gammaf.c -- float version of w_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#include "math.h"
-
-#ifdef __STDC__
-	float tgammaf(float x)
-#else
-	float tgammaf(x)
-	float x;
-#endif
-{
-        float y;
-	int local_signgam;
-	y = __ieee754_gammaf_r(x,&local_signgam);
-	if (local_signgam < 0) y = -y;
-#ifdef _IEEE_LIBM
-	return y;
-#else
-	if(_LIB_VERSION == _IEEE_) return y;
-
-	if(!finitef(y)&&finitef(x)) {
-	  if(floorf(x)==x&&x<=(float)0.0)
-	    /* tgammaf pole */
-	    return (float)__kernel_standard((double)x,(double)x,141);
-	  else
-	    /* tgammaf overflow */
-	    return (float)__kernel_standard((double)x,(double)x,140);
-	}
-	return y;
-#endif
-}
diff --git a/newlib/libm/math/wr_gamma.c b/newlib/libm/math/wr_gamma.c
deleted file mode 100644
index 0092ed02c..000000000
--- a/newlib/libm/math/wr_gamma.c
+++ /dev/null
@@ -1,76 +0,0 @@
-
-/* @(#)wr_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper double gamma_r(double x, int *signgamp)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double gamma_r(double x, int *signgamp) /* wrapper lgamma_r */
-#else
-	double gamma_r(x,signgamp)              /* wrapper lgamma_r */
-	double x; int *signgamp;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_gamma_r(x,signgamp);
-#else
-        double y;
-	struct exception exc;
-        y = __ieee754_gamma_r(x,signgamp);
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finite(y)&&finite(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "gamma";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-                exc.retval = HUGE;
-            else
-                exc.retval = HUGE_VAL;
-            if(floor(x)==x&&x<=0.0) {
-		/* gamma(-integer) or gamma(0) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-            } else {
-		/* gamma(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-                else if (!matherr(&exc)) {
-                  errno = ERANGE;
-                }
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return exc.retval; 
-        } else
-            return y;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wr_lgamma.c b/newlib/libm/math/wr_lgamma.c
deleted file mode 100644
index c59c1cce9..000000000
--- a/newlib/libm/math/wr_lgamma.c
+++ /dev/null
@@ -1,77 +0,0 @@
-
-/* @(#)wr_lgamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper double lgamma_r(double x, int *signgamp)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double lgamma_r(double x, int *signgamp) /* wrapper lgamma_r */
-#else
-	double lgamma_r(x,signgamp)              /* wrapper lgamma_r */
-	double x; int *signgamp;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_lgamma_r(x,signgamp);
-#else
-        double y;
-	struct exception exc;
-        y = __ieee754_lgamma_r(x,signgamp);
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finite(y)&&finite(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "lgamma";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = HUGE;
-            else
-               exc.retval = HUGE_VAL;
-	    if(floor(x)==x&&x<=0.0) {
-		/* lgamma(-integer) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		   errno = EDOM;
-		else if (!matherr(&exc)) {
-		   errno = EDOM;
-		}
-
-            } else {
-		/* lgamma(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		   errno = ERANGE;
-                else if (!matherr(&exc)) {
-                   errno = ERANGE;
-		}
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-        } else
-            return y;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/math/wrf_gamma.c b/newlib/libm/math/wrf_gamma.c
deleted file mode 100644
index ae285f564..000000000
--- a/newlib/libm/math/wrf_gamma.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* wrf_gamma.c -- float version of wr_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper float gammaf_r(float x, int *signgamp)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float gammaf_r(float x, int *signgamp) /* wrapper lgammaf_r */
-#else
-	float gammaf_r(x,signgamp)              /* wrapper lgammaf_r */
-	float x; int *signgamp;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_gammaf_r(x,signgamp);
-#else
-        float y;
-	struct exception exc;
-        y = __ieee754_gammaf_r(x,signgamp);
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finitef(y)&&finitef(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "gammaf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-                exc.retval = HUGE;
-            else
-                exc.retval = HUGE_VAL;
-            if(floorf(x)==x&&x<=(float)0.0) {
-		/* gammaf(-integer) or gamma(0) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		  errno = EDOM;
-		else if (!matherr(&exc)) {
-		  errno = EDOM;
-		}
-            } else {
-		/* gammaf(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		  errno = ERANGE;
-                else if (!matherr(&exc)) {
-                  errno = ERANGE;
-                }
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-	    return (float)exc.retval; 
-        } else
-            return y;
-#endif
-}             
diff --git a/newlib/libm/math/wrf_lgamma.c b/newlib/libm/math/wrf_lgamma.c
deleted file mode 100644
index 73985e271..000000000
--- a/newlib/libm/math/wrf_lgamma.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* wrf_lgamma.c -- float version of wr_lgamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * wrapper float lgammaf_r(float x, int *signgamp)
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifdef __STDC__
-	float lgammaf_r(float x, int *signgamp) /* wrapper lgammaf_r */
-#else
-	float lgammaf_r(x,signgamp)              /* wrapper lgammaf_r */
-	float x; int *signgamp;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return __ieee754_lgammaf_r(x,signgamp);
-#else
-        float y;
-	struct exception exc;
-        y = __ieee754_lgammaf_r(x,signgamp);
-        if(_LIB_VERSION == _IEEE_) return y;
-        if(!finitef(y)&&finitef(x)) {
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.name = "lgammaf";
-	    exc.err = 0;
-	    exc.arg1 = exc.arg2 = (double)x;
-            if (_LIB_VERSION == _SVID_)
-               exc.retval = HUGE;
-            else
-               exc.retval = HUGE_VAL;
-	    if(floorf(x)==x&&x<=(float)0.0) {
-		/* lgammaf(-integer) or lgamma(0) */
-		exc.type = SING;
-		if (_LIB_VERSION == _POSIX_)
-		   errno = EDOM;
-		else if (!matherr(&exc)) {
-		   errno = EDOM;
-		}
-
-            } else {
-		/* lgammaf(finite) overflow */
-		exc.type = OVERFLOW;
-                if (_LIB_VERSION == _POSIX_)
-		   errno = ERANGE;
-                else if (!matherr(&exc)) {
-                   errno = ERANGE;
-		}
-            }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-        } else
-            return y;
-#endif
-}             
diff --git a/newlib/libm/mathfp/Makefile.am b/newlib/libm/mathfp/Makefile.am
deleted file mode 100644
index 92688c43d..000000000
--- a/newlib/libm/mathfp/Makefile.am
+++ /dev/null
@@ -1,199 +0,0 @@
-## Process this file with automake to generate Makefile.in
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src =	s_acos.c s_frexp.c s_mathcnst.c \
-	s_cos.c s_sinh.c \
-	s_asin.c\
-	s_asine.c s_cosh.c s_ispos.c s_numtest.c s_sqrt.c \
-	s_exp.c s_ldexp.c s_pow.c s_tan.c \
-	s_atan.c \
-	s_atan2.c s_fabs.c s_log.c s_tanh.c \
-	s_log10.c s_sin.c \
-	s_floor.c s_sine.c \
-	s_sincos.c \
-	s_atangent.c s_logarithm.c \
-	s_sineh.c \
-	s_ceil.c s_isnan.c s_isinf.c \
-	e_acosh.c e_atanh.c e_remainder.c \
-	er_gamma.c er_lgamma.c \
-	s_erf.c e_j0.c e_j1.c w_jn.c e_hypot.c \
-	w_cabs.c w_drem.c s_asinh.c s_fmod.c \
-	e_scalb.c s_infconst.c s_signif.c \
-	s_exp2.c s_tgamma.c
-
-fsrc =	sf_ceil.c \
-	sf_acos.c sf_frexp.c \
-	sf_cos.c sf_sinh.c \
-	sf_asine.c sf_cosh.c sf_ispos.c sf_numtest.c sf_sqrt.c \
-	sf_asin.c \
-	sf_exp.c sf_ldexp.c sf_pow.c sf_tan.c \
-	sf_atan2.c sf_fabs.c sf_tanh.c \
-	sf_atan.c sf_log10.c sf_sin.c\
-	sf_floor.c sf_sine.c \
-	sf_sincos.c \
-	sf_atangent.c sf_logarithm.c sf_sineh.c \
-	sf_log.c sf_sineh.c \
-	sf_isnan.c sf_isinf.c \
-	ef_acosh.c ef_atanh.c ef_remainder.c \
-	erf_gamma.c erf_lgamma.c \
-	sf_erf.c ef_j0.c ef_j1.c wf_jn.c ef_hypot.c \
-	wf_cabs.c wf_drem.c sf_asinh.c sf_fmod.c \
-	ef_scalb.c sf_signif.c \
-	sf_exp2.c sf_tgamma.c
-
-libmathfp_la_LDFLAGS = -Xcompiler -nostdlib
-
-if USE_LIBTOOL
-noinst_LTLIBRARIES = libmathfp.la
-libmathfp_la_SOURCES = $(src) $(fsrc)
-noinst_DATA = objectlist.awk.in
-else
-noinst_LIBRARIES = lib.a
-lib_a_SOURCES = $(src) $(fsrc)
-noinst_DATA =
-endif # USE_LIBTOOL
-
-include $(srcdir)/../../Makefile.shared
-
-chobj = eacosh.def \
-	eatanh.def \
-	ehypot.def \
-	eremainder.def \
-	erlgamma.def \
-	sacos.def \
-	sasine.def \
-	sasinh.def \
-	satan.def \
-	satan2.def \
-	satangent.def \
-	scosh.def \
-	serf.def \
-	sexp.def \
-	sfabs.def \
-	sfloor.def \
-	sfmod.def \
-	sfrexp.def \
-	sisnan.def \
-	sldexp.def \
-	slog10.def \
-	slogarithm.def \
-	spow.def \
-	ssine.def \
-	ssineh.def \
-	ssqrt.def \
-	stan.def \
-	stanh.def \
-	wjn.def
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-TARGETDOC = ../tmp.texi
-
-doc: $(chobj)
-	cat $(srcdir)/mathfp.tex >> $(TARGETDOC)
-
-CLEANFILES = $(chobj) *.ref
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-eacosh.def: e_acosh.c
-	$(CHEW) < $(srcdir)/e_acosh.c >$@ 2>/dev/null
-	touch stmp-def
-eatanh.def: e_atanh.c
-	$(CHEW) < $(srcdir)/e_atanh.c >$@ 2>/dev/null
-	touch stmp-def
-ehypot.def: e_hypot.c
-	$(CHEW) < $(srcdir)/e_hypot.c >$@ 2>/dev/null
-	touch stmp-def
-eremainder.def: e_remainder.c
-	$(CHEW) < $(srcdir)/e_remainder.c >$@ 2>/dev/null
-	touch stmp-def
-erlgamma.def: er_lgamma.c
-	$(CHEW) < $(srcdir)/er_lgamma.c >$@ 2>/dev/null
-	touch stmp-def
-sacos.def: s_acos.c
-	$(CHEW) < $(srcdir)/s_acos.c >$@ 2>/dev/null
-	touch stmp-def
-sasine.def: s_asine.c
-	$(CHEW) < $(srcdir)/s_asine.c >$@ 2>/dev/null
-	touch stmp-def
-sasinh.def: s_asinh.c
-	$(CHEW) < $(srcdir)/s_asinh.c >$@ 2>/dev/null
-	touch stmp-def
-satan.def: s_atan.c
-	$(CHEW) < $(srcdir)/s_atan.c >$@ 2>/dev/null
-	touch stmp-def
-satan2.def: s_atan2.c
-	$(CHEW) < $(srcdir)/s_atan2.c >$@ 2>/dev/null
-	touch stmp-def
-satangent.def: s_atangent.c
-	$(CHEW) < $(srcdir)/s_atangent.c >$@ 2>/dev/null
-	touch stmp-def
-scosh.def: s_cosh.c
-	$(CHEW) < $(srcdir)/s_cosh.c >$@ 2>/dev/null
-	touch stmp-def
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_erf.c >$@ 2>/dev/null
-	touch stmp-def
-sexp.def: s_exp.c
-	$(CHEW) < $(srcdir)/s_exp.c >$@ 2>/dev/null
-	touch stmp-def
-sfabs.def: s_fabs.c
-	$(CHEW) < $(srcdir)/s_fabs.c >$@ 2>/dev/null
-	touch stmp-def
-sfloor.def: s_floor.c
-	$(CHEW) < $(srcdir)/s_floor.c >$@ 2>/dev/null
-	touch stmp-def
-sfmod.def: s_fmod.c
-	$(CHEW) < $(srcdir)/s_fmod.c >$@ 2>/dev/null
-	touch stmp-def
-sfrexp.def: s_frexp.c
-	$(CHEW) < $(srcdir)/s_frexp.c >$@ 2>/dev/null
-	touch stmp-def
-sisnan.def: s_isnan.c
-	$(CHEW) < $(srcdir)/s_isnan.c >$@ 2>/dev/null
-	touch stmp-def
-sldexp.def: s_ldexp.c
-	$(CHEW) < $(srcdir)/s_ldexp.c >$@ 2>/dev/null
-	touch stmp-def
-slog10.def: s_log10.c
-	$(CHEW) < $(srcdir)/s_log10.c >$@ 2>/dev/null
-	touch stmp-def
-slogarithm.def: s_logarithm.c
-	$(CHEW) < $(srcdir)/s_logarithm.c >$@ 2>/dev/null
-	touch stmp-def
-spow.def: s_pow.c
-	$(CHEW) < $(srcdir)/s_pow.c >$@ 2>/dev/null
-	touch stmp-def
-ssine.def: s_sine.c
-	$(CHEW) < $(srcdir)/s_sine.c >$@ 2>/dev/null
-	touch stmp-def
-ssineh.def: s_sineh.c
-	$(CHEW) < $(srcdir)/s_sineh.c >$@ 2>/dev/null
-	touch stmp-def
-ssqrt.def: s_sqrt.c
-	$(CHEW) < $(srcdir)/s_sqrt.c >$@ 2>/dev/null
-	touch stmp-def
-stan.def: s_tan.c
-	$(CHEW) < $(srcdir)/s_tan.c >$@ 2>/dev/null
-	touch stmp-def
-stanh.def: s_tanh.c
-	$(CHEW) < $(srcdir)/s_tanh.c >$@ 2>/dev/null
-	touch stmp-def
-wjn.def: w_jn.c
-	$(CHEW) < $(srcdir)/w_jn.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h $(srcdir)/../common/fdlibm.h
diff --git a/newlib/libm/mathfp/Makefile.in b/newlib/libm/mathfp/Makefile.in
deleted file mode 100644
index 83656b30c..000000000
--- a/newlib/libm/mathfp/Makefile.in
+++ /dev/null
@@ -1,605 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-AR = @AR@
-AS = @AS@
-CC = @CC@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-EXEEXT = @EXEEXT@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBM_MACHINE_LIB = @LIBM_MACHINE_LIB@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-VERSION = @VERSION@
-aext = @aext@
-libm_machine_dir = @libm_machine_dir@
-machine_dir = @machine_dir@
-newlib_basedir = @newlib_basedir@
-oext = @oext@
-sys_dir = @sys_dir@
-
-AUTOMAKE_OPTIONS = cygnus
-
-INCLUDES = -I$(srcdir)/../common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-
-src = s_acos.c s_frexp.c s_mathcnst.c \
-	s_cos.c s_sinh.c \
-	s_asin.c\
-	s_asine.c s_cosh.c s_ispos.c s_numtest.c s_sqrt.c \
-	s_exp.c s_ldexp.c s_pow.c s_tan.c \
-	s_atan.c \
-	s_atan2.c s_fabs.c s_log.c s_tanh.c \
-	s_log10.c s_sin.c \
-	s_floor.c s_sine.c \
-	s_sincos.c \
-	s_atangent.c s_logarithm.c \
-	s_sineh.c \
-	s_ceil.c s_isnan.c s_isinf.c \
-	e_acosh.c e_atanh.c e_remainder.c \
-	er_gamma.c er_lgamma.c \
-	s_erf.c e_j0.c e_j1.c w_jn.c e_hypot.c \
-	w_cabs.c w_drem.c s_asinh.c s_fmod.c \
-	e_scalb.c s_infconst.c s_signif.c \
-	s_exp2.c s_tgamma.c
-
-
-fsrc = sf_ceil.c \
-	sf_acos.c sf_frexp.c \
-	sf_cos.c sf_sinh.c \
-	sf_asine.c sf_cosh.c sf_ispos.c sf_numtest.c sf_sqrt.c \
-	sf_asin.c \
-	sf_exp.c sf_ldexp.c sf_pow.c sf_tan.c \
-	sf_atan2.c sf_fabs.c sf_tanh.c \
-	sf_atan.c sf_log10.c sf_sin.c\
-	sf_floor.c sf_sine.c \
-	sf_sincos.c \
-	sf_atangent.c sf_logarithm.c sf_sineh.c \
-	sf_log.c sf_sineh.c \
-	sf_isnan.c sf_isinf.c \
-	ef_acosh.c ef_atanh.c ef_remainder.c \
-	erf_gamma.c erf_lgamma.c \
-	sf_erf.c ef_j0.c ef_j1.c wf_jn.c ef_hypot.c \
-	wf_cabs.c wf_drem.c sf_asinh.c sf_fmod.c \
-	ef_scalb.c sf_signif.c \
-	sf_exp2.c sf_tgamma.c
-
-
-libmathfp_la_LDFLAGS = -Xcompiler -nostdlib
-
-@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = @USE_LIBTOOL_TRUE@libmathfp.la
-@USE_LIBTOOL_TRUE@libmathfp_la_SOURCES = @USE_LIBTOOL_TRUE@$(src) $(fsrc)
-@USE_LIBTOOL_TRUE@noinst_DATA = @USE_LIBTOOL_TRUE@objectlist.awk.in
-@USE_LIBTOOL_FALSE@noinst_DATA = 
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = @USE_LIBTOOL_FALSE@lib.a
-@USE_LIBTOOL_FALSE@lib_a_SOURCES = @USE_LIBTOOL_FALSE@$(src) $(fsrc)
-
-chobj = eacosh.def \
-	eatanh.def \
-	ehypot.def \
-	eremainder.def \
-	erlgamma.def \
-	sacos.def \
-	sasine.def \
-	sasinh.def \
-	satan.def \
-	satan2.def \
-	satangent.def \
-	scosh.def \
-	serf.def \
-	sexp.def \
-	sfabs.def \
-	sfloor.def \
-	sfmod.def \
-	sfrexp.def \
-	sisnan.def \
-	sldexp.def \
-	slog10.def \
-	slogarithm.def \
-	spow.def \
-	ssine.def \
-	ssineh.def \
-	ssqrt.def \
-	stan.def \
-	stanh.def \
-	wjn.def
-
-
-SUFFIXES = .def
-
-CHEW = ../../doc/makedoc -f $(srcdir)/../../doc/doc.str
-
-TARGETDOC = ../tmp.texi
-
-CLEANFILES = $(chobj) *.ref
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) 
-CPPFLAGS = @CPPFLAGS@
-LIBS = @LIBS@
-lib_a_LIBADD = 
-@USE_LIBTOOL_FALSE@lib_a_OBJECTS =  s_acos.$(OBJEXT) s_frexp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_mathcnst.$(OBJEXT) s_cos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_sinh.$(OBJEXT) s_asin.$(OBJEXT) s_asine.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_cosh.$(OBJEXT) s_ispos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_numtest.$(OBJEXT) s_sqrt.$(OBJEXT) s_exp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ldexp.$(OBJEXT) s_pow.$(OBJEXT) s_tan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_atan.$(OBJEXT) s_atan2.$(OBJEXT) s_fabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_log.$(OBJEXT) s_tanh.$(OBJEXT) s_log10.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_sin.$(OBJEXT) s_floor.$(OBJEXT) s_sine.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_sincos.$(OBJEXT) s_atangent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_logarithm.$(OBJEXT) s_sineh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_ceil.$(OBJEXT) s_isnan.$(OBJEXT) s_isinf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_acosh.$(OBJEXT) e_atanh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_remainder.$(OBJEXT) er_gamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@er_lgamma.$(OBJEXT) s_erf.$(OBJEXT) e_j0.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@e_j1.$(OBJEXT) w_jn.$(OBJEXT) e_hypot.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@w_cabs.$(OBJEXT) w_drem.$(OBJEXT) s_asinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_fmod.$(OBJEXT) e_scalb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_infconst.$(OBJEXT) s_signif.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@s_exp2.$(OBJEXT) s_tgamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_ceil.$(OBJEXT) sf_acos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_frexp.$(OBJEXT) sf_cos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_sinh.$(OBJEXT) sf_asine.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_cosh.$(OBJEXT) sf_ispos.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_numtest.$(OBJEXT) sf_sqrt.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_asin.$(OBJEXT) sf_exp.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_ldexp.$(OBJEXT) sf_pow.$(OBJEXT) sf_tan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_atan2.$(OBJEXT) sf_fabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_tanh.$(OBJEXT) sf_atan.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_log10.$(OBJEXT) sf_sin.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_floor.$(OBJEXT) sf_sine.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_sincos.$(OBJEXT) sf_atangent.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_logarithm.$(OBJEXT) sf_sineh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_log.$(OBJEXT) sf_sineh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_isnan.$(OBJEXT) sf_isinf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_acosh.$(OBJEXT) ef_atanh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_remainder.$(OBJEXT) erf_gamma.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@erf_lgamma.$(OBJEXT) sf_erf.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_j0.$(OBJEXT) ef_j1.$(OBJEXT) wf_jn.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@ef_hypot.$(OBJEXT) wf_cabs.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@wf_drem.$(OBJEXT) sf_asinh.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_fmod.$(OBJEXT) ef_scalb.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_signif.$(OBJEXT) sf_exp2.$(OBJEXT) \
-@USE_LIBTOOL_FALSE@sf_tgamma.$(OBJEXT)
-LTLIBRARIES =  $(noinst_LTLIBRARIES)
-
-libmathfp_la_LIBADD = 
-@USE_LIBTOOL_TRUE@libmathfp_la_OBJECTS =  s_acos.lo s_frexp.lo \
-@USE_LIBTOOL_TRUE@s_mathcnst.lo s_cos.lo s_sinh.lo s_asin.lo s_asine.lo \
-@USE_LIBTOOL_TRUE@s_cosh.lo s_ispos.lo s_numtest.lo s_sqrt.lo s_exp.lo \
-@USE_LIBTOOL_TRUE@s_ldexp.lo s_pow.lo s_tan.lo s_atan.lo s_atan2.lo \
-@USE_LIBTOOL_TRUE@s_fabs.lo s_log.lo s_tanh.lo s_log10.lo s_sin.lo \
-@USE_LIBTOOL_TRUE@s_floor.lo s_sine.lo s_sincos.lo s_atangent.lo \
-@USE_LIBTOOL_TRUE@s_logarithm.lo s_sineh.lo s_ceil.lo s_isnan.lo \
-@USE_LIBTOOL_TRUE@s_isinf.lo e_acosh.lo e_atanh.lo e_remainder.lo \
-@USE_LIBTOOL_TRUE@er_gamma.lo er_lgamma.lo s_erf.lo e_j0.lo e_j1.lo \
-@USE_LIBTOOL_TRUE@w_jn.lo e_hypot.lo w_cabs.lo w_drem.lo s_asinh.lo \
-@USE_LIBTOOL_TRUE@s_fmod.lo e_scalb.lo s_infconst.lo s_signif.lo \
-@USE_LIBTOOL_TRUE@s_exp2.lo s_tgamma.lo sf_ceil.lo sf_acos.lo \
-@USE_LIBTOOL_TRUE@sf_frexp.lo sf_cos.lo sf_sinh.lo sf_asine.lo \
-@USE_LIBTOOL_TRUE@sf_cosh.lo sf_ispos.lo sf_numtest.lo sf_sqrt.lo \
-@USE_LIBTOOL_TRUE@sf_asin.lo sf_exp.lo sf_ldexp.lo sf_pow.lo sf_tan.lo \
-@USE_LIBTOOL_TRUE@sf_atan2.lo sf_fabs.lo sf_tanh.lo sf_atan.lo \
-@USE_LIBTOOL_TRUE@sf_log10.lo sf_sin.lo sf_floor.lo sf_sine.lo \
-@USE_LIBTOOL_TRUE@sf_sincos.lo sf_atangent.lo sf_logarithm.lo \
-@USE_LIBTOOL_TRUE@sf_sineh.lo sf_log.lo sf_sineh.lo sf_isnan.lo \
-@USE_LIBTOOL_TRUE@sf_isinf.lo ef_acosh.lo ef_atanh.lo ef_remainder.lo \
-@USE_LIBTOOL_TRUE@erf_gamma.lo erf_lgamma.lo sf_erf.lo ef_j0.lo \
-@USE_LIBTOOL_TRUE@ef_j1.lo wf_jn.lo ef_hypot.lo wf_cabs.lo wf_drem.lo \
-@USE_LIBTOOL_TRUE@sf_asinh.lo sf_fmod.lo ef_scalb.lo sf_signif.lo \
-@USE_LIBTOOL_TRUE@sf_exp2.lo sf_tgamma.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA =  $(noinst_DATA)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(lib_a_SOURCES) $(libmathfp_la_SOURCES)
-OBJECTS = $(lib_a_OBJECTS) $(libmathfp_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .def .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/../../Makefile.shared
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus mathfp/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
-	$(COMPILE) -c $<
-
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-	-rm -f lib.a
-	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-	$(RANLIB) lib.a
-
-mostlyclean-noinstLTLIBRARIES:
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-
-distclean-noinstLTLIBRARIES:
-
-maintainer-clean-noinstLTLIBRARIES:
-
-libmathfp.la: $(libmathfp_la_OBJECTS) $(libmathfp_la_DEPENDENCIES)
-	$(LINK)  $(libmathfp_la_LDFLAGS) $(libmathfp_la_OBJECTS) $(libmathfp_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = mathfp
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am:
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-info-am: 
-install-info: install-info-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
-		clean-noinstLTLIBRARIES clean-tags clean-generic \
-		mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-libtool distclean-noinstLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-noinstLTLIBRARIES \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
-distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
-maintainer-clean-noinstLTLIBRARIES tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-info-am install-info \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-objectlist.awk.in: $(noinst_LTLIBRARIES)
-	-rm -f objectlist.awk.in
-	for i in `ls *.lo` ; \
-	do \
-	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
-	done
-
-.c.def:
-	$(CHEW) < $< > $*.def 2> $*.ref
-	touch stmp-def
-
-doc: $(chobj)
-	cat $(srcdir)/mathfp.tex >> $(TARGETDOC)
-
-# Texinfo does not appear to support underscores in file names, so we
-# name the .def files without underscores.
-
-eacosh.def: e_acosh.c
-	$(CHEW) < $(srcdir)/e_acosh.c >$@ 2>/dev/null
-	touch stmp-def
-eatanh.def: e_atanh.c
-	$(CHEW) < $(srcdir)/e_atanh.c >$@ 2>/dev/null
-	touch stmp-def
-ehypot.def: e_hypot.c
-	$(CHEW) < $(srcdir)/e_hypot.c >$@ 2>/dev/null
-	touch stmp-def
-eremainder.def: e_remainder.c
-	$(CHEW) < $(srcdir)/e_remainder.c >$@ 2>/dev/null
-	touch stmp-def
-erlgamma.def: er_lgamma.c
-	$(CHEW) < $(srcdir)/er_lgamma.c >$@ 2>/dev/null
-	touch stmp-def
-sacos.def: s_acos.c
-	$(CHEW) < $(srcdir)/s_acos.c >$@ 2>/dev/null
-	touch stmp-def
-sasine.def: s_asine.c
-	$(CHEW) < $(srcdir)/s_asine.c >$@ 2>/dev/null
-	touch stmp-def
-sasinh.def: s_asinh.c
-	$(CHEW) < $(srcdir)/s_asinh.c >$@ 2>/dev/null
-	touch stmp-def
-satan.def: s_atan.c
-	$(CHEW) < $(srcdir)/s_atan.c >$@ 2>/dev/null
-	touch stmp-def
-satan2.def: s_atan2.c
-	$(CHEW) < $(srcdir)/s_atan2.c >$@ 2>/dev/null
-	touch stmp-def
-satangent.def: s_atangent.c
-	$(CHEW) < $(srcdir)/s_atangent.c >$@ 2>/dev/null
-	touch stmp-def
-scosh.def: s_cosh.c
-	$(CHEW) < $(srcdir)/s_cosh.c >$@ 2>/dev/null
-	touch stmp-def
-serf.def: s_erf.c
-	$(CHEW) < $(srcdir)/s_erf.c >$@ 2>/dev/null
-	touch stmp-def
-sexp.def: s_exp.c
-	$(CHEW) < $(srcdir)/s_exp.c >$@ 2>/dev/null
-	touch stmp-def
-sfabs.def: s_fabs.c
-	$(CHEW) < $(srcdir)/s_fabs.c >$@ 2>/dev/null
-	touch stmp-def
-sfloor.def: s_floor.c
-	$(CHEW) < $(srcdir)/s_floor.c >$@ 2>/dev/null
-	touch stmp-def
-sfmod.def: s_fmod.c
-	$(CHEW) < $(srcdir)/s_fmod.c >$@ 2>/dev/null
-	touch stmp-def
-sfrexp.def: s_frexp.c
-	$(CHEW) < $(srcdir)/s_frexp.c >$@ 2>/dev/null
-	touch stmp-def
-sisnan.def: s_isnan.c
-	$(CHEW) < $(srcdir)/s_isnan.c >$@ 2>/dev/null
-	touch stmp-def
-sldexp.def: s_ldexp.c
-	$(CHEW) < $(srcdir)/s_ldexp.c >$@ 2>/dev/null
-	touch stmp-def
-slog10.def: s_log10.c
-	$(CHEW) < $(srcdir)/s_log10.c >$@ 2>/dev/null
-	touch stmp-def
-slogarithm.def: s_logarithm.c
-	$(CHEW) < $(srcdir)/s_logarithm.c >$@ 2>/dev/null
-	touch stmp-def
-spow.def: s_pow.c
-	$(CHEW) < $(srcdir)/s_pow.c >$@ 2>/dev/null
-	touch stmp-def
-ssine.def: s_sine.c
-	$(CHEW) < $(srcdir)/s_sine.c >$@ 2>/dev/null
-	touch stmp-def
-ssineh.def: s_sineh.c
-	$(CHEW) < $(srcdir)/s_sineh.c >$@ 2>/dev/null
-	touch stmp-def
-ssqrt.def: s_sqrt.c
-	$(CHEW) < $(srcdir)/s_sqrt.c >$@ 2>/dev/null
-	touch stmp-def
-stan.def: s_tan.c
-	$(CHEW) < $(srcdir)/s_tan.c >$@ 2>/dev/null
-	touch stmp-def
-stanh.def: s_tanh.c
-	$(CHEW) < $(srcdir)/s_tanh.c >$@ 2>/dev/null
-	touch stmp-def
-wjn.def: w_jn.c
-	$(CHEW) < $(srcdir)/w_jn.c >$@ 2>/dev/null
-	touch stmp-def
-
-# A partial dependency list.
-
-$(lib_a_OBJECTS): $(srcdir)/../../libc/include/math.h $(srcdir)/../common/fdlibm.h
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/newlib/libm/mathfp/e_acosh.c b/newlib/libm/mathfp/e_acosh.c
deleted file mode 100644
index c2bf52890..000000000
--- a/newlib/libm/mathfp/e_acosh.c
+++ /dev/null
@@ -1,135 +0,0 @@
-
-/* @(#)e_acosh.c 5.1 93/09/24 */
-
-/*
-FUNCTION
-<<acosh>>, <<acoshf>>---inverse hyperbolic cosine
-
-INDEX
-acosh
-INDEX
-acoshf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double acosh(double <[x]>);
-        float acoshf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double acosh(<[x]>)
-        double <[x]>;
-
-        float acoshf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-<<acosh>> calculates the inverse hyperbolic cosine of <[x]>.
-<<acosh>> is defined as
-@ifnottex
-. log(<[x]> + sqrt(<[x]>*<[x]>-1))
-@end ifnottex
-@tex
-$$ln\Bigl(x + \sqrt{x^2-1}\Bigr)$$
-@end tex
-
-<[x]> must be a number greater than or equal to 1.
-
-<<acoshf>> is identical, other than taking and returning floats.
-
-RETURNS
-<<acosh>> and <<acoshf>> return the calculated value.  If <[x]>
-less than 1, the return value is NaN and <<errno>> is set to <<EDOM>>.
-
-You can change the error-handling behavior with the non-ANSI
-<<matherr>> function.
-
-PORTABILITY
-Neither <<acosh>> nor <<acoshf>> are ANSI C.  They are not recommended
-for portable programs.
-
-
-QUICKREF ANSI SVID POSIX RENTRANT
- acos    n,n,n,m
- acosf   n,n,n,m
-
-MATHREF
- acosh, NAN,   arg,DOMAIN,EDOM
- acosh, < 1.0, NAN,DOMAIN,EDOM
- acosh, >=1.0, acosh(arg),,,
-
-MATHREF
- acoshf, NAN,   arg,DOMAIN,EDOM
- acoshf, < 1.0, NAN,DOMAIN,EDOM
- acoshf, >=1.0, acosh(arg),,,
-
-*/
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* acosh(x)
- * Method :
- *	Based on 
- *		acosh(x) = log [ x + sqrt(x*x-1) ]
- *	we have
- *		acosh(x) := log(x)+ln2,	if x is large; else
- *		acosh(x) := log(2x-1/(sqrt(x*x-1)+x)) if x>2; else
- *		acosh(x) := log1p(t+sqrt(2.0*t+t*t)); where t=x-1.
- *
- * Special cases:
- *	acosh(x) is NaN with signal if x<1.
- *	acosh(NaN) is NaN without signal.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one	= 1.0,
-ln2	= 6.93147180559945286227e-01;  /* 0x3FE62E42, 0xFEFA39EF */
-
-#ifdef __STDC__
-	double acosh(double x)
-#else
-	double acosh(x)
-	double x;
-#endif
-{	
-	double t;
-	__int32_t hx;
-	__uint32_t lx;
-	EXTRACT_WORDS(hx,lx,x);
-	if(hx<0x3ff00000) {		/* x < 1 */
-	    return (x-x)/(x-x);
-	} else if(hx >=0x41b00000) {	/* x > 2**28 */
-	    if(hx >=0x7ff00000) {	/* x is inf of NaN */
-	        return x+x;
-	    } else 
-		return log(x)+ln2;	/* acosh(huge)=log(2x) */
-	} else if(((hx-0x3ff00000)|lx)==0) {
-	    return 0.0;			/* acosh(1) = 0 */
-	} else if (hx > 0x40000000) {	/* 2**28 > x > 2 */
-	    t=x*x;
-	    return log(2.0*x-one/(x+sqrt(t-one)));
-	} else {			/* 1<x<2 */
-	    t = x-one;
-	    return log1p(t+sqrt(2.0*t+t*t));
-	}
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_atanh.c b/newlib/libm/mathfp/e_atanh.c
deleted file mode 100644
index fb233e5d4..000000000
--- a/newlib/libm/mathfp/e_atanh.c
+++ /dev/null
@@ -1,139 +0,0 @@
-
-/* @(#)e_atanh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<atanh>>, <<atanhf>>---inverse hyperbolic tangent
-
-INDEX
-        atanh
-INDEX
-        atanhf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atanh(double <[x]>);
-        float atanhf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atanh(<[x]>)
-        double <[x]>;
-
-        float atanhf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-        <<atanh>> calculates the inverse hyperbolic tangent of <[x]>.
-
-        <<atanhf>> is identical, other than taking and returning
-        <<float>> values.
-
-RETURNS
-        <<atanh>> and <<atanhf>> return the calculated value.
-
-        If
-        @ifnottex
-        |<[x]>|
-        @end ifnottex
-        @tex
-        $|x|$
-        @end tex
-        is greater than 1, the global <<errno>> is set to <<EDOM>> and
-        the result is a NaN.  A <<DOMAIN error>> is reported.
-
-        If
-        @ifnottex
-        |<[x]>|
-        @end ifnottex
-        @tex
-        $|x|$
-        @end tex
-        is 1, the global <<errno>> is set to <<EDOM>>; and the result is
-        infinity with the same sign as <<x>>.  A <<SING error>> is reported.
-
-        You can modify the error handling for these routines using
-        <<matherr>>.
-
-PORTABILITY
-        Neither <<atanh>> nor <<atanhf>> are ANSI C.
-
-QUICKREF
-        atanh - pure
-        atanhf - pure
-
-
-*/
-
-/* atanh(x)
- * Method :
- *    1.Reduced x to positive by atanh(-x) = -atanh(x)
- *    2.For x>=0.5
- *                  1              2x                          x
- *	atanh(x) = --- * log(1 + -------) = 0.5 * log1p(2 * --------)
- *                  2             1 - x                      1 - x
- *	
- * 	For x<0.5
- *	atanh(x) = 0.5*log1p(2x+2x*x/(1-x))
- *
- * Special cases:
- *	atanh(x) is NaN if |x| > 1 with signal;
- *	atanh(NaN) is that NaN with no signal;
- *	atanh(+-1) is +-INF with signal.
- *
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, huge = 1e300;
-#else
-static double one = 1.0, huge = 1e300;
-#endif
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	double atanh(double x)
-#else
-	double atanh(x)
-	double x;
-#endif
-{
-	double t;
-	__int32_t hx,ix;
-	__uint32_t lx;
-	EXTRACT_WORDS(hx,lx,x);
-	ix = hx&0x7fffffff;
-	if ((ix|((lx|(-lx))>>31))>0x3ff00000) /* |x|>1 */
-	    return (x-x)/(x-x);
-	if(ix==0x3ff00000) 
-	    return x/zero;
-	if(ix<0x3e300000&&(huge+x)>zero) return x;	/* x<2**-28 */
-	SET_HIGH_WORD(x,ix);
-	if(ix<0x3fe00000) {		/* x < 0.5 */
-	    t = x+x;
-	    t = 0.5*log1p(t+t*x/(one-x));
-	} else 
-	    t = 0.5*log1p((x+x)/(one-x));
-	if(hx>=0) return t; else return -t;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_hypot.c b/newlib/libm/mathfp/e_hypot.c
deleted file mode 100644
index 713aa77c2..000000000
--- a/newlib/libm/mathfp/e_hypot.c
+++ /dev/null
@@ -1,170 +0,0 @@
-
-/* @(#)e_hypot.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-        <<hypot>>, <<hypotf>>---distance from origin
-INDEX
-        hypot
-INDEX
-        hypotf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double hypot(double <[x]>, double <[y]>);
-        float hypotf(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-        double hypot(<[x]>, <[y]>)
-        double <[x]>, <[y]>;
-
-        float hypotf(<[x]>, <[y]>)
-        float <[x]>, <[y]>;
-
-DESCRIPTION
-        <<hypot>> calculates the Euclidean distance
-        @tex
-        $\sqrt{x^2+y^2}$
-        @end tex
-        @ifnottex
-        <<sqrt(<[x]>*<[x]> + <[y]>*<[y]>)>>
-        @end ifnottex
-        between the origin (0,0) and a point represented by the
-        Cartesian coordinates (<[x]>,<[y]>).  <<hypotf>> differs only
-        in the type of its arguments and result.
-
-RETURNS
-        Normally, the distance value is returned.  On overflow,
-        <<hypot>> returns <<HUGE_VAL>> and sets <<errno>> to
-        <<ERANGE>>.
-
-        You can change the error treatment with <<matherr>>.
-
-PORTABILITY
-        <<hypot>> and <<hypotf>> are not ANSI C.  */
-
-/* hypot(x,y)
- *
- * Method :                  
- *	If (assume round-to-nearest) z=x*x+y*y 
- *	has error less than sqrt(2)/2 ulp, than 
- *	sqrt(z) has error less than 1 ulp (exercise).
- *
- *	So, compute sqrt(x*x+y*y) with some care as 
- *	follows to get the error below 1 ulp:
- *
- *	Assume x>y>0;
- *	(if possible, set rounding to round-to-nearest)
- *	1. if x > 2y  use
- *		x1*x1+(y*y+(x2*(x+x1))) for x*x+y*y
- *	where x1 = x with lower 32 bits cleared, x2 = x-x1; else
- *	2. if x <= 2y use
- *		t1*y1+((x-y)*(x-y)+(t1*y2+t2*y))
- *	where t1 = 2x with lower 32 bits cleared, t2 = 2x-t1, 
- *	y1= y with lower 32 bits chopped, y2 = y-y1.
- *		
- *	NOTE: scaling may be necessary if some argument is too 
- *	      large or too tiny
- *
- * Special cases:
- *	hypot(x,y) is INF if x or y is +INF or -INF; else
- *	hypot(x,y) is NAN if x or y is NAN.
- *
- * Accuracy:
- * 	hypot(x,y) returns sqrt(x^2+y^2) with error less 
- * 	than 1 ulps (units in the last place) 
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double hypot(double x, double y)
-#else
-	double hypot(x,y)
-	double x, y;
-#endif
-{
-	double a=x,b=y,t1,t2,y1,y2,w;
-	__int32_t j,k,ha,hb;
-
-	GET_HIGH_WORD(ha,x);
-	ha &= 0x7fffffff;
-	GET_HIGH_WORD(hb,y);
-	hb &= 0x7fffffff;
-	if(hb > ha) {a=y;b=x;j=ha; ha=hb;hb=j;} else {a=x;b=y;}
-	SET_HIGH_WORD(a,ha);	/* a <- |a| */
-	SET_HIGH_WORD(b,hb);	/* b <- |b| */
-	if((ha-hb)>0x3c00000) {return a+b;} /* x/y > 2**60 */
-	k=0;
-	if(ha > 0x5f300000) {	/* a>2**500 */
-	   if(ha >= 0x7ff00000) {	/* Inf or NaN */
-	       __uint32_t low;
-	       w = a+b;			/* for sNaN */
-	       GET_LOW_WORD(low,a);
-	       if(((ha&0xfffff)|low)==0) w = a;
-	       GET_LOW_WORD(low,b);
-	       if(((hb^0x7ff00000)|low)==0) w = b;
-	       return w;
-	   }
-	   /* scale a and b by 2**-600 */
-	   ha -= 0x25800000; hb -= 0x25800000;	k += 600;
-	   SET_HIGH_WORD(a,ha);
-	   SET_HIGH_WORD(b,hb);
-	}
-	if(hb < 0x20b00000) {	/* b < 2**-500 */
-	    if(hb <= 0x000fffff) {	/* subnormal b or 0 */	
-	        __uint32_t low;
-		GET_LOW_WORD(low,b);
-		if((hb|low)==0) return a;
-		t1=0;
-		SET_HIGH_WORD(t1,0x7fd00000);	/* t1=2^1022 */
-		b *= t1;
-		a *= t1;
-		k -= 1022;
-	    } else {		/* scale a and b by 2^600 */
-	        ha += 0x25800000; 	/* a *= 2^600 */
-		hb += 0x25800000;	/* b *= 2^600 */
-		k -= 600;
-		SET_HIGH_WORD(a,ha);
-		SET_HIGH_WORD(b,hb);
-	    }
-	}
-    /* medium size a and b */
-	w = a-b;
-	if (w>b) {
-	    t1 = 0;
-	    SET_HIGH_WORD(t1,ha);
-	    t2 = a-t1;
-	    w  = sqrt(t1*t1-(b*(-b)-t2*(a+t1)));
-	} else {
-	    a  = a+a;
-	    y1 = 0;
-	    SET_HIGH_WORD(y1,hb);
-	    y2 = b - y1;
-	    t1 = 0;
-	    SET_HIGH_WORD(t1,ha+0x00100000);
-	    t2 = a - t1;
-	    w  = sqrt(t1*y1-(w*(-w)-(t1*y2+t2*b)));
-	}
-	if(k!=0) {
-	    __uint32_t high;
-	    t1 = 1.0;
-	    GET_HIGH_WORD(high,t1);
-	    SET_HIGH_WORD(t1,high+(k<<20));
-	    return t1*w;
-	} else return w;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_j0.c b/newlib/libm/mathfp/e_j0.c
deleted file mode 100644
index c58c08e70..000000000
--- a/newlib/libm/mathfp/e_j0.c
+++ /dev/null
@@ -1,487 +0,0 @@
-
-/* @(#)e_j0.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* j0(x), y0(x)
- * Bessel function of the first and second kinds of order zero.
- * Method -- j0(x):
- *	1. For tiny x, we use j0(x) = 1 - x^2/4 + x^4/64 - ...
- *	2. Reduce x to |x| since j0(x)=j0(-x),  and
- *	   for x in (0,2)
- *		j0(x) = 1-z/4+ z^2*R0/S0,  where z = x*x;
- *	   (precision:  |j0-1+z/4-z^2R0/S0 |<2**-63.67 )
- *	   for x in (2,inf)
- * 		j0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)-q0(x)*sin(x0))
- * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
- *	   as follow:
- *		cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
- *			= 1/sqrt(2) * (cos(x) + sin(x))
- *		sin(x0) = sin(x)cos(pi/4)-cos(x)sin(pi/4)
- *			= 1/sqrt(2) * (sin(x) - cos(x))
- * 	   (To avoid cancellation, use
- *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
- * 	    to compute the worse one.)
- *	   
- *	3 Special cases
- *		j0(nan)= nan
- *		j0(0) = 1
- *		j0(inf) = 0
- *		
- * Method -- y0(x):
- *	1. For x<2.
- *	   Since 
- *		y0(x) = 2/pi*(j0(x)*(ln(x/2)+Euler) + x^2/4 - ...)
- *	   therefore y0(x)-2/pi*j0(x)*ln(x) is an even function.
- *	   We use the following function to approximate y0,
- *		y0(x) = U(z)/V(z) + (2/pi)*(j0(x)*ln(x)), z= x^2
- *	   where 
- *		U(z) = u00 + u01*z + ... + u06*z^6
- *		V(z) = 1  + v01*z + ... + v04*z^4
- *	   with absolute approximation error bounded by 2**-72.
- *	   Note: For tiny x, U/V = u0 and j0(x)~1, hence
- *		y0(tiny) = u0 + (2/pi)*ln(tiny), (choose tiny<2**-27)
- *	2. For x>=2.
- * 		y0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)+q0(x)*sin(x0))
- * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
- *	   by the method mentioned above.
- *	3. Special cases: y0(0)=-inf, y0(x<0)=NaN, y0(inf)=0.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static double pzero(double), qzero(double);
-#else
-static double pzero(), qzero();
-#endif
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-huge 	= 1e300,
-one	= 1.0,
-invsqrtpi=  5.64189583547756279280e-01, /* 0x3FE20DD7, 0x50429B6D */
-tpi      =  6.36619772367581382433e-01, /* 0x3FE45F30, 0x6DC9C883 */
- 		/* R0/S0 on [0, 2.00] */
-R02  =  1.56249999999999947958e-02, /* 0x3F8FFFFF, 0xFFFFFFFD */
-R03  = -1.89979294238854721751e-04, /* 0xBF28E6A5, 0xB61AC6E9 */
-R04  =  1.82954049532700665670e-06, /* 0x3EBEB1D1, 0x0C503919 */
-R05  = -4.61832688532103189199e-09, /* 0xBE33D5E7, 0x73D63FCE */
-S01  =  1.56191029464890010492e-02, /* 0x3F8FFCE8, 0x82C8C2A4 */
-S02  =  1.16926784663337450260e-04, /* 0x3F1EA6D2, 0xDD57DBF4 */
-S03  =  5.13546550207318111446e-07, /* 0x3EA13B54, 0xCE84D5A9 */
-S04  =  1.16614003333790000205e-09; /* 0x3E1408BC, 0xF4745D8F */
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	double j0(double x) 
-#else
-	double j0(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,r,u,v;
-	__int32_t hx,ix;
-
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return one/(x*x);
-	x = fabs(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sin(x);
-		c = cos(x);
-		ss = s-c;
-		cc = s+c;
-		if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-		    z = -cos(x+x);
-		    if ((s*c)<zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x48000000) z = (invsqrtpi*cc)/sqrt(x);
-		else {
-		    u = pzero(x); v = qzero(x);
-		    z = invsqrtpi*(u*cc-v*ss)/sqrt(x);
-		}
-		return z;
-	}
-	if(ix<0x3f200000) {	/* |x| < 2**-13 */
-	    if(huge+x>one) {	/* raise inexact if x != 0 */
-	        if(ix<0x3e400000) return one;	/* |x|<2**-27 */
-	        else 	      return one - 0.25*x*x;
-	    }
-	}
-	z = x*x;
-	r =  z*(R02+z*(R03+z*(R04+z*R05)));
-	s =  one+z*(S01+z*(S02+z*(S03+z*S04)));
-	if(ix < 0x3FF00000) {	/* |x| < 1.00 */
-	    return one + z*(-0.25+(r/s));
-	} else {
-	    u = 0.5*x;
-	    return((one+u)*(one-u)+z*(r/s));
-	}
-}
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-u00  = -7.38042951086872317523e-02, /* 0xBFB2E4D6, 0x99CBD01F */
-u01  =  1.76666452509181115538e-01, /* 0x3FC69D01, 0x9DE9E3FC */
-u02  = -1.38185671945596898896e-02, /* 0xBF8C4CE8, 0xB16CFA97 */
-u03  =  3.47453432093683650238e-04, /* 0x3F36C54D, 0x20B29B6B */
-u04  = -3.81407053724364161125e-06, /* 0xBECFFEA7, 0x73D25CAD */
-u05  =  1.95590137035022920206e-08, /* 0x3E550057, 0x3B4EABD4 */
-u06  = -3.98205194132103398453e-11, /* 0xBDC5E43D, 0x693FB3C8 */
-v01  =  1.27304834834123699328e-02, /* 0x3F8A1270, 0x91C9C71A */
-v02  =  7.60068627350353253702e-05, /* 0x3F13ECBB, 0xF578C6C1 */
-v03  =  2.59150851840457805467e-07, /* 0x3E91642D, 0x7FF202FD */
-v04  =  4.41110311332675467403e-10; /* 0x3DFE5018, 0x3BD6D9EF */
-
-#ifdef __STDC__
-	double y0(double x) 
-#else
-	double y0(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,u,v;
-	__int32_t hx,ix,lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-        ix = 0x7fffffff&hx;
-    /* Y0(NaN) is NaN, y0(-inf) is Nan, y0(inf) is 0  */
-	if(ix>=0x7ff00000) return  one/(x+x*x); 
-        if((ix|lx)==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-        /* y0(x) = sqrt(2/(pi*x))*(p0(x)*sin(x0)+q0(x)*cos(x0))
-         * where x0 = x-pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
-         *                      =  1/sqrt(2) * (sin(x) + cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                s = sin(x);
-                c = cos(x);
-                ss = s-c;
-                cc = s+c;
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-                if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-                    z = -cos(x+x);
-                    if ((s*c)<zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-                if(ix>0x48000000) z = (invsqrtpi*ss)/sqrt(x);
-                else {
-                    u = pzero(x); v = qzero(x);
-                    z = invsqrtpi*(u*ss+v*cc)/sqrt(x);
-                }
-                return z;
-	}
-	if(ix<=0x3e400000) {	/* x < 2**-27 */
-	    return(u00 + tpi*log(x));
-	}
-	z = x*x;
-	u = u00+z*(u01+z*(u02+z*(u03+z*(u04+z*(u05+z*u06)))));
-	v = one+z*(v01+z*(v02+z*(v03+z*v04)));
-	return(u/v + tpi*(j0(x)*log(x)));
-}
-
-/* The asymptotic expansions of pzero is
- *	1 - 9/128 s^2 + 11025/98304 s^4 - ...,	where s = 1/x.
- * For x >= 2, We approximate pzero by
- * 	pzero(x) = 1 + (R/S)
- * where  R = pR0 + pR1*s^2 + pR2*s^4 + ... + pR5*s^10
- * 	  S = 1 + pS0*s^2 + ... + pS4*s^10
- * and
- *	| pzero(x)-1-R/S | <= 2  ** ( -60.26)
- */
-#ifdef __STDC__
-static const double pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
- -7.03124999999900357484e-02, /* 0xBFB1FFFF, 0xFFFFFD32 */
- -8.08167041275349795626e+00, /* 0xC02029D0, 0xB44FA779 */
- -2.57063105679704847262e+02, /* 0xC0701102, 0x7B19E863 */
- -2.48521641009428822144e+03, /* 0xC0A36A6E, 0xCD4DCAFC */
- -5.25304380490729545272e+03, /* 0xC0B4850B, 0x36CC643D */
-};
-#ifdef __STDC__
-static const double pS8[5] = {
-#else
-static double pS8[5] = {
-#endif
-  1.16534364619668181717e+02, /* 0x405D2233, 0x07A96751 */
-  3.83374475364121826715e+03, /* 0x40ADF37D, 0x50596938 */
-  4.05978572648472545552e+04, /* 0x40E3D2BB, 0x6EB6B05F */
-  1.16752972564375915681e+05, /* 0x40FC810F, 0x8F9FA9BD */
-  4.76277284146730962675e+04, /* 0x40E74177, 0x4F2C49DC */
-};
-
-#ifdef __STDC__
-static const double pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -1.14125464691894502584e-11, /* 0xBDA918B1, 0x47E495CC */
- -7.03124940873599280078e-02, /* 0xBFB1FFFF, 0xE69AFBC6 */
- -4.15961064470587782438e+00, /* 0xC010A370, 0xF90C6BBF */
- -6.76747652265167261021e+01, /* 0xC050EB2F, 0x5A7D1783 */
- -3.31231299649172967747e+02, /* 0xC074B3B3, 0x6742CC63 */
- -3.46433388365604912451e+02, /* 0xC075A6EF, 0x28A38BD7 */
-};
-#ifdef __STDC__
-static const double pS5[5] = {
-#else
-static double pS5[5] = {
-#endif
-  6.07539382692300335975e+01, /* 0x404E6081, 0x0C98C5DE */
-  1.05125230595704579173e+03, /* 0x40906D02, 0x5C7E2864 */
-  5.97897094333855784498e+03, /* 0x40B75AF8, 0x8FBE1D60 */
-  9.62544514357774460223e+03, /* 0x40C2CCB8, 0xFA76FA38 */
-  2.40605815922939109441e+03, /* 0x40A2CC1D, 0xC70BE864 */
-};
-
-#ifdef __STDC__
-static const double pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static double pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -2.54704601771951915620e-09, /* 0xBE25E103, 0x6FE1AA86 */
- -7.03119616381481654654e-02, /* 0xBFB1FFF6, 0xF7C0E24B */
- -2.40903221549529611423e+00, /* 0xC00345B2, 0xAEA48074 */
- -2.19659774734883086467e+01, /* 0xC035F74A, 0x4CB94E14 */
- -5.80791704701737572236e+01, /* 0xC04D0A22, 0x420A1A45 */
- -3.14479470594888503854e+01, /* 0xC03F72AC, 0xA892D80F */
-};
-#ifdef __STDC__
-static const double pS3[5] = {
-#else
-static double pS3[5] = {
-#endif
-  3.58560338055209726349e+01, /* 0x4041ED92, 0x84077DD3 */
-  3.61513983050303863820e+02, /* 0x40769839, 0x464A7C0E */
-  1.19360783792111533330e+03, /* 0x4092A66E, 0x6D1061D6 */
-  1.12799679856907414432e+03, /* 0x40919FFC, 0xB8C39B7E */
-  1.73580930813335754692e+02, /* 0x4065B296, 0xFC379081 */
-};
-
-#ifdef __STDC__
-static const double pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -8.87534333032526411254e-08, /* 0xBE77D316, 0xE927026D */
- -7.03030995483624743247e-02, /* 0xBFB1FF62, 0x495E1E42 */
- -1.45073846780952986357e+00, /* 0xBFF73639, 0x8A24A843 */
- -7.63569613823527770791e+00, /* 0xC01E8AF3, 0xEDAFA7F3 */
- -1.11931668860356747786e+01, /* 0xC02662E6, 0xC5246303 */
- -3.23364579351335335033e+00, /* 0xC009DE81, 0xAF8FE70F */
-};
-#ifdef __STDC__
-static const double pS2[5] = {
-#else
-static double pS2[5] = {
-#endif
-  2.22202997532088808441e+01, /* 0x40363865, 0x908B5959 */
-  1.36206794218215208048e+02, /* 0x4061069E, 0x0EE8878F */
-  2.70470278658083486789e+02, /* 0x4070E786, 0x42EA079B */
-  1.53875394208320329881e+02, /* 0x40633C03, 0x3AB6FAFF */
-  1.46576176948256193810e+01, /* 0x402D50B3, 0x44391809 */
-};
-
-#ifdef __STDC__
-	static double pzero(double x)
-#else
-	static double pzero(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double z,r,s;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = pR8; q= pS8;}
-	else if(ix>=0x40122E8B){p = pR5; q= pS5;}
-	else if(ix>=0x4006DB6D){p = pR3; q= pS3;}
-      else {p = pR2; q= pS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-	return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qzero is
- *	-1/8 s + 75/1024 s^3 - ..., where s = 1/x.
- * We approximate qzero by
- * 	qzero(x) = s*(-1.25 + (R/S))
- * where  R = qR0 + qR1*s^2 + qR2*s^4 + ... + qR5*s^10
- * 	  S = 1 + qS0*s^2 + ... + qS5*s^12
- * and
- *	| qzero(x)/s +1.25-R/S | <= 2  ** ( -61.22)
- */
-#ifdef __STDC__
-static const double qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
-  7.32421874999935051953e-02, /* 0x3FB2BFFF, 0xFFFFFE2C */
-  1.17682064682252693899e+01, /* 0x40278952, 0x5BB334D6 */
-  5.57673380256401856059e+02, /* 0x40816D63, 0x15301825 */
-  8.85919720756468632317e+03, /* 0x40C14D99, 0x3E18F46D */
-  3.70146267776887834771e+04, /* 0x40E212D4, 0x0E901566 */
-};
-#ifdef __STDC__
-static const double qS8[6] = {
-#else
-static double qS8[6] = {
-#endif
-  1.63776026895689824414e+02, /* 0x406478D5, 0x365B39BC */
-  8.09834494656449805916e+03, /* 0x40BFA258, 0x4E6B0563 */
-  1.42538291419120476348e+05, /* 0x41016652, 0x54D38C3F */
-  8.03309257119514397345e+05, /* 0x412883DA, 0x83A52B43 */
-  8.40501579819060512818e+05, /* 0x4129A66B, 0x28DE0B3D */
- -3.43899293537866615225e+05, /* 0xC114FD6D, 0x2C9530C5 */
-};
-
-#ifdef __STDC__
-static const double qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.84085963594515531381e-11, /* 0x3DB43D8F, 0x29CC8CD9 */
-  7.32421766612684765896e-02, /* 0x3FB2BFFF, 0xD172B04C */
-  5.83563508962056953777e+00, /* 0x401757B0, 0xB9953DD3 */
-  1.35111577286449829671e+02, /* 0x4060E392, 0x0A8788E9 */
-  1.02724376596164097464e+03, /* 0x40900CF9, 0x9DC8C481 */
-  1.98997785864605384631e+03, /* 0x409F17E9, 0x53C6E3A6 */
-};
-#ifdef __STDC__
-static const double qS5[6] = {
-#else
-static double qS5[6] = {
-#endif
-  8.27766102236537761883e+01, /* 0x4054B1B3, 0xFB5E1543 */
-  2.07781416421392987104e+03, /* 0x40A03BA0, 0xDA21C0CE */
-  1.88472887785718085070e+04, /* 0x40D267D2, 0x7B591E6D */
-  5.67511122894947329769e+04, /* 0x40EBB5E3, 0x97E02372 */
-  3.59767538425114471465e+04, /* 0x40E19118, 0x1F7A54A0 */
- -5.35434275601944773371e+03, /* 0xC0B4EA57, 0xBEDBC609 */
-};
-
-#ifdef __STDC__
-static const double qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static double qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  4.37741014089738620906e-09, /* 0x3E32CD03, 0x6ADECB82 */
-  7.32411180042911447163e-02, /* 0x3FB2BFEE, 0x0E8D0842 */
-  3.34423137516170720929e+00, /* 0x400AC0FC, 0x61149CF5 */
-  4.26218440745412650017e+01, /* 0x40454F98, 0x962DAEDD */
-  1.70808091340565596283e+02, /* 0x406559DB, 0xE25EFD1F */
-  1.66733948696651168575e+02, /* 0x4064D77C, 0x81FA21E0 */
-};
-#ifdef __STDC__
-static const double qS3[6] = {
-#else
-static double qS3[6] = {
-#endif
-  4.87588729724587182091e+01, /* 0x40486122, 0xBFE343A6 */
-  7.09689221056606015736e+02, /* 0x40862D83, 0x86544EB3 */
-  3.70414822620111362994e+03, /* 0x40ACF04B, 0xE44DFC63 */
-  6.46042516752568917582e+03, /* 0x40B93C6C, 0xD7C76A28 */
-  2.51633368920368957333e+03, /* 0x40A3A8AA, 0xD94FB1C0 */
- -1.49247451836156386662e+02, /* 0xC062A7EB, 0x201CF40F */
-};
-
-#ifdef __STDC__
-static const double qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.50444444886983272379e-07, /* 0x3E84313B, 0x54F76BDB */
-  7.32234265963079278272e-02, /* 0x3FB2BEC5, 0x3E883E34 */
-  1.99819174093815998816e+00, /* 0x3FFFF897, 0xE727779C */
-  1.44956029347885735348e+01, /* 0x402CFDBF, 0xAAF96FE5 */
-  3.16662317504781540833e+01, /* 0x403FAA8E, 0x29FBDC4A */
-  1.62527075710929267416e+01, /* 0x403040B1, 0x71814BB4 */
-};
-#ifdef __STDC__
-static const double qS2[6] = {
-#else
-static double qS2[6] = {
-#endif
-  3.03655848355219184498e+01, /* 0x403E5D96, 0xF7C07AED */
-  2.69348118608049844624e+02, /* 0x4070D591, 0xE4D14B40 */
-  8.44783757595320139444e+02, /* 0x408A6645, 0x22B3BF22 */
-  8.82935845112488550512e+02, /* 0x408B977C, 0x9C5CC214 */
-  2.12666388511798828631e+02, /* 0x406A9553, 0x0E001365 */
- -5.31095493882666946917e+00, /* 0xC0153E6A, 0xF8B32931 */
-};
-
-#ifdef __STDC__
-	static double qzero(double x)
-#else
-	static double qzero(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double s,r,z;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qR8; q= qS8;}
-	else if(ix>=0x40122E8B){p = qR5; q= qS5;}
-	else if(ix>=0x4006DB6D){p = qR3; q= qS3;}
-      else {p = qR2; q= qS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (-.125 + r/s)/x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_j1.c b/newlib/libm/mathfp/e_j1.c
deleted file mode 100644
index 274adfdc8..000000000
--- a/newlib/libm/mathfp/e_j1.c
+++ /dev/null
@@ -1,486 +0,0 @@
-
-/* @(#)e_j1.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* j1(x), y1(x)
- * Bessel function of the first and second kinds of order zero.
- * Method -- j1(x):
- *	1. For tiny x, we use j1(x) = x/2 - x^3/16 + x^5/384 - ...
- *	2. Reduce x to |x| since j1(x)=-j1(-x),  and
- *	   for x in (0,2)
- *		j1(x) = x/2 + x*z*R0/S0,  where z = x*x;
- *	   (precision:  |j1/x - 1/2 - R0/S0 |<2**-61.51 )
- *	   for x in (2,inf)
- * 		j1(x) = sqrt(2/(pi*x))*(p1(x)*cos(x1)-q1(x)*sin(x1))
- * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
- * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
- *	   as follow:
- *		cos(x1) =  cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
- *			=  1/sqrt(2) * (sin(x) - cos(x))
- *		sin(x1) =  sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
- *			= -1/sqrt(2) * (sin(x) + cos(x))
- * 	   (To avoid cancellation, use
- *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
- * 	    to compute the worse one.)
- *	   
- *	3 Special cases
- *		j1(nan)= nan
- *		j1(0) = 0
- *		j1(inf) = 0
- *		
- * Method -- y1(x):
- *	1. screen out x<=0 cases: y1(0)=-inf, y1(x<0)=NaN 
- *	2. For x<2.
- *	   Since 
- *		y1(x) = 2/pi*(j1(x)*(ln(x/2)+Euler)-1/x-x/2+5/64*x^3-...)
- *	   therefore y1(x)-2/pi*j1(x)*ln(x)-1/x is an odd function.
- *	   We use the following function to approximate y1,
- *		y1(x) = x*U(z)/V(z) + (2/pi)*(j1(x)*ln(x)-1/x), z= x^2
- *	   where for x in [0,2] (abs err less than 2**-65.89)
- *		U(z) = U0[0] + U0[1]*z + ... + U0[4]*z^4
- *		V(z) = 1  + v0[0]*z + ... + v0[4]*z^5
- *	   Note: For tiny x, 1/x dominate y1 and hence
- *		y1(tiny) = -2/pi/tiny, (choose tiny<2**-54)
- *	3. For x>=2.
- * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
- * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
- *	   by method mentioned above.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static double pone(double), qone(double);
-#else
-static double pone(), qone();
-#endif
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-huge    = 1e300,
-one	= 1.0,
-invsqrtpi=  5.64189583547756279280e-01, /* 0x3FE20DD7, 0x50429B6D */
-tpi      =  6.36619772367581382433e-01, /* 0x3FE45F30, 0x6DC9C883 */
-	/* R0/S0 on [0,2] */
-r00  = -6.25000000000000000000e-02, /* 0xBFB00000, 0x00000000 */
-r01  =  1.40705666955189706048e-03, /* 0x3F570D9F, 0x98472C61 */
-r02  = -1.59955631084035597520e-05, /* 0xBEF0C5C6, 0xBA169668 */
-r03  =  4.96727999609584448412e-08, /* 0x3E6AAAFA, 0x46CA0BD9 */
-s01  =  1.91537599538363460805e-02, /* 0x3F939D0B, 0x12637E53 */
-s02  =  1.85946785588630915560e-04, /* 0x3F285F56, 0xB9CDF664 */
-s03  =  1.17718464042623683263e-06, /* 0x3EB3BFF8, 0x333F8498 */
-s04  =  5.04636257076217042715e-09, /* 0x3E35AC88, 0xC97DFF2C */
-s05  =  1.23542274426137913908e-11; /* 0x3DAB2ACF, 0xCFB97ED8 */
-
-#ifdef __STDC__
-static const double zero    = 0.0;
-#else
-static double zero    = 0.0;
-#endif
-
-#ifdef __STDC__
-	double j1(double x) 
-#else
-	double j1(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,r,u,v,y;
-	__int32_t hx,ix;
-
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return one/x;
-	y = fabs(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sin(y);
-		c = cos(y);
-		ss = -s-c;
-		cc = s-c;
-		if(ix<0x7fe00000) {  /* make sure y+y not overflow */
-		    z = cos(y+y);
-		    if ((s*c)>zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j1(x) = 1/sqrt(pi) * (P(1,x)*cc - Q(1,x)*ss) / sqrt(x)
-	 * y1(x) = 1/sqrt(pi) * (P(1,x)*ss + Q(1,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x48000000) z = (invsqrtpi*cc)/sqrt(y);
-		else {
-		    u = pone(y); v = qone(y);
-		    z = invsqrtpi*(u*cc-v*ss)/sqrt(y);
-		}
-		if(hx<0) return -z;
-		else  	 return  z;
-	}
-	if(ix<0x3e400000) {	/* |x|<2**-27 */
-	    if(huge+x>one) return 0.5*x;/* inexact if x!=0 necessary */
-	}
-	z = x*x;
-	r =  z*(r00+z*(r01+z*(r02+z*r03)));
-	s =  one+z*(s01+z*(s02+z*(s03+z*(s04+z*s05))));
-	r *= x;
-	return(x*0.5+r/s);
-}
-
-#ifdef __STDC__
-static const double U0[5] = {
-#else
-static double U0[5] = {
-#endif
- -1.96057090646238940668e-01, /* 0xBFC91866, 0x143CBC8A */
-  5.04438716639811282616e-02, /* 0x3FA9D3C7, 0x76292CD1 */
- -1.91256895875763547298e-03, /* 0xBF5F55E5, 0x4844F50F */
-  2.35252600561610495928e-05, /* 0x3EF8AB03, 0x8FA6B88E */
- -9.19099158039878874504e-08, /* 0xBE78AC00, 0x569105B8 */
-};
-#ifdef __STDC__
-static const double V0[5] = {
-#else
-static double V0[5] = {
-#endif
-  1.99167318236649903973e-02, /* 0x3F94650D, 0x3F4DA9F0 */
-  2.02552581025135171496e-04, /* 0x3F2A8C89, 0x6C257764 */
-  1.35608801097516229404e-06, /* 0x3EB6C05A, 0x894E8CA6 */
-  6.22741452364621501295e-09, /* 0x3E3ABF1D, 0x5BA69A86 */
-  1.66559246207992079114e-11, /* 0x3DB25039, 0xDACA772A */
-};
-
-#ifdef __STDC__
-	double y1(double x) 
-#else
-	double y1(x) 
-	double x;
-#endif
-{
-	double z, s,c,ss,cc,u,v;
-	__int32_t hx,ix,lx;
-
-	EXTRACT_WORDS(hx,lx,x);
-        ix = 0x7fffffff&hx;
-    /* if Y1(NaN) is NaN, Y1(-inf) is NaN, Y1(inf) is 0 */
-	if(ix>=0x7ff00000) return  one/(x+x*x); 
-        if((ix|lx)==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-                s = sin(x);
-                c = cos(x);
-                ss = -s-c;
-                cc = s-c;
-                if(ix<0x7fe00000) {  /* make sure x+x not overflow */
-                    z = cos(x+x);
-                    if ((s*c)>zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-        /* y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x0)+q1(x)*cos(x0))
-         * where x0 = x-3pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      = -1/sqrt(2) * (cos(x) + sin(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                if(ix>0x48000000) z = (invsqrtpi*ss)/sqrt(x);
-                else {
-                    u = pone(x); v = qone(x);
-                    z = invsqrtpi*(u*ss+v*cc)/sqrt(x);
-                }
-                return z;
-        } 
-        if(ix<=0x3c900000) {    /* x < 2**-54 */
-            return(-tpi/x);
-        } 
-        z = x*x;
-        u = U0[0]+z*(U0[1]+z*(U0[2]+z*(U0[3]+z*U0[4])));
-        v = one+z*(V0[0]+z*(V0[1]+z*(V0[2]+z*(V0[3]+z*V0[4]))));
-        return(x*(u/v) + tpi*(j1(x)*log(x)-one/x));
-}
-
-/* For x >= 8, the asymptotic expansions of pone is
- *	1 + 15/128 s^2 - 4725/2^15 s^4 - ...,	where s = 1/x.
- * We approximate pone by
- * 	pone(x) = 1 + (R/S)
- * where  R = pr0 + pr1*s^2 + pr2*s^4 + ... + pr5*s^10
- * 	  S = 1 + ps0*s^2 + ... + ps4*s^10
- * and
- *	| pone(x)-1-R/S | <= 2  ** ( -60.06)
- */
-
-#ifdef __STDC__
-static const double pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
-  1.17187499999988647970e-01, /* 0x3FBDFFFF, 0xFFFFFCCE */
-  1.32394806593073575129e+01, /* 0x402A7A9D, 0x357F7FCE */
-  4.12051854307378562225e+02, /* 0x4079C0D4, 0x652EA590 */
-  3.87474538913960532227e+03, /* 0x40AE457D, 0xA3A532CC */
-  7.91447954031891731574e+03, /* 0x40BEEA7A, 0xC32782DD */
-};
-#ifdef __STDC__
-static const double ps8[5] = {
-#else
-static double ps8[5] = {
-#endif
-  1.14207370375678408436e+02, /* 0x405C8D45, 0x8E656CAC */
-  3.65093083420853463394e+03, /* 0x40AC85DC, 0x964D274F */
-  3.69562060269033463555e+04, /* 0x40E20B86, 0x97C5BB7F */
-  9.76027935934950801311e+04, /* 0x40F7D42C, 0xB28F17BB */
-  3.08042720627888811578e+04, /* 0x40DE1511, 0x697A0B2D */
-};
-
-#ifdef __STDC__
-static const double pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.31990519556243522749e-11, /* 0x3DAD0667, 0xDAE1CA7D */
-  1.17187493190614097638e-01, /* 0x3FBDFFFF, 0xE2C10043 */
-  6.80275127868432871736e+00, /* 0x401B3604, 0x6E6315E3 */
-  1.08308182990189109773e+02, /* 0x405B13B9, 0x452602ED */
-  5.17636139533199752805e+02, /* 0x40802D16, 0xD052D649 */
-  5.28715201363337541807e+02, /* 0x408085B8, 0xBB7E0CB7 */
-};
-#ifdef __STDC__
-static const double ps5[5] = {
-#else
-static double ps5[5] = {
-#endif
-  5.92805987221131331921e+01, /* 0x404DA3EA, 0xA8AF633D */
-  9.91401418733614377743e+02, /* 0x408EFB36, 0x1B066701 */
-  5.35326695291487976647e+03, /* 0x40B4E944, 0x5706B6FB */
-  7.84469031749551231769e+03, /* 0x40BEA4B0, 0xB8A5BB15 */
-  1.50404688810361062679e+03, /* 0x40978030, 0x036F5E51 */
-};
-
-#ifdef __STDC__
-static const double pr3[6] = {
-#else
-static double pr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  3.02503916137373618024e-09, /* 0x3E29FC21, 0xA7AD9EDD */
-  1.17186865567253592491e-01, /* 0x3FBDFFF5, 0x5B21D17B */
-  3.93297750033315640650e+00, /* 0x400F76BC, 0xE85EAD8A */
-  3.51194035591636932736e+01, /* 0x40418F48, 0x9DA6D129 */
-  9.10550110750781271918e+01, /* 0x4056C385, 0x4D2C1837 */
-  4.85590685197364919645e+01, /* 0x4048478F, 0x8EA83EE5 */
-};
-#ifdef __STDC__
-static const double ps3[5] = {
-#else
-static double ps3[5] = {
-#endif
-  3.47913095001251519989e+01, /* 0x40416549, 0xA134069C */
-  3.36762458747825746741e+02, /* 0x40750C33, 0x07F1A75F */
-  1.04687139975775130551e+03, /* 0x40905B7C, 0x5037D523 */
-  8.90811346398256432622e+02, /* 0x408BD67D, 0xA32E31E9 */
-  1.03787932439639277504e+02, /* 0x4059F26D, 0x7C2EED53 */
-};
-
-#ifdef __STDC__
-static const double pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.07710830106873743082e-07, /* 0x3E7CE9D4, 0xF65544F4 */
-  1.17176219462683348094e-01, /* 0x3FBDFF42, 0xBE760D83 */
-  2.36851496667608785174e+00, /* 0x4002F2B7, 0xF98FAEC0 */
-  1.22426109148261232917e+01, /* 0x40287C37, 0x7F71A964 */
-  1.76939711271687727390e+01, /* 0x4031B1A8, 0x177F8EE2 */
-  5.07352312588818499250e+00, /* 0x40144B49, 0xA574C1FE */
-};
-#ifdef __STDC__
-static const double ps2[5] = {
-#else
-static double ps2[5] = {
-#endif
-  2.14364859363821409488e+01, /* 0x40356FBD, 0x8AD5ECDC */
-  1.25290227168402751090e+02, /* 0x405F5293, 0x14F92CD5 */
-  2.32276469057162813669e+02, /* 0x406D08D8, 0xD5A2DBD9 */
-  1.17679373287147100768e+02, /* 0x405D6B7A, 0xDA1884A9 */
-  8.36463893371618283368e+00, /* 0x4020BAB1, 0xF44E5192 */
-};
-
-#ifdef __STDC__
-	static double pone(double x)
-#else
-	static double pone(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double z,r,s;
-        __int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-        if(ix>=0x40200000)     {p = pr8; q= ps8;}
-        else if(ix>=0x40122E8B){p = pr5; q= ps5;}
-        else if(ix>=0x4006DB6D){p = pr3; q= ps3;}
-        else {p = pr2; q= ps2;}
-        z = one/(x*x);
-        r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-        s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-        return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qone is
- *	3/8 s - 105/1024 s^3 - ..., where s = 1/x.
- * We approximate qone by
- * 	qone(x) = s*(0.375 + (R/S))
- * where  R = qr1*s^2 + qr2*s^4 + ... + qr5*s^10
- * 	  S = 1 + qs1*s^2 + ... + qs6*s^12
- * and
- *	| qone(x)/s -0.375-R/S | <= 2  ** ( -61.13)
- */
-
-#ifdef __STDC__
-static const double qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static double qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.00000000000000000000e+00, /* 0x00000000, 0x00000000 */
- -1.02539062499992714161e-01, /* 0xBFBA3FFF, 0xFFFFFDF3 */
- -1.62717534544589987888e+01, /* 0xC0304591, 0xA26779F7 */
- -7.59601722513950107896e+02, /* 0xC087BCD0, 0x53E4B576 */
- -1.18498066702429587167e+04, /* 0xC0C724E7, 0x40F87415 */
- -4.84385124285750353010e+04, /* 0xC0E7A6D0, 0x65D09C6A */
-};
-#ifdef __STDC__
-static const double qs8[6] = {
-#else
-static double qs8[6] = {
-#endif
-  1.61395369700722909556e+02, /* 0x40642CA6, 0xDE5BCDE5 */
-  7.82538599923348465381e+03, /* 0x40BE9162, 0xD0D88419 */
-  1.33875336287249578163e+05, /* 0x4100579A, 0xB0B75E98 */
-  7.19657723683240939863e+05, /* 0x4125F653, 0x72869C19 */
-  6.66601232617776375264e+05, /* 0x412457D2, 0x7719AD5C */
- -2.94490264303834643215e+05, /* 0xC111F969, 0x0EA5AA18 */
-};
-
-#ifdef __STDC__
-static const double qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static double qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -2.08979931141764104297e-11, /* 0xBDB6FA43, 0x1AA1A098 */
- -1.02539050241375426231e-01, /* 0xBFBA3FFF, 0xCB597FEF */
- -8.05644828123936029840e+00, /* 0xC0201CE6, 0xCA03AD4B */
- -1.83669607474888380239e+02, /* 0xC066F56D, 0x6CA7B9B0 */
- -1.37319376065508163265e+03, /* 0xC09574C6, 0x6931734F */
- -2.61244440453215656817e+03, /* 0xC0A468E3, 0x88FDA79D */
-};
-#ifdef __STDC__
-static const double qs5[6] = {
-#else
-static double qs5[6] = {
-#endif
-  8.12765501384335777857e+01, /* 0x405451B2, 0xFF5A11B2 */
-  1.99179873460485964642e+03, /* 0x409F1F31, 0xE77BF839 */
-  1.74684851924908907677e+04, /* 0x40D10F1F, 0x0D64CE29 */
-  4.98514270910352279316e+04, /* 0x40E8576D, 0xAABAD197 */
-  2.79480751638918118260e+04, /* 0x40DB4B04, 0xCF7C364B */
- -4.71918354795128470869e+03, /* 0xC0B26F2E, 0xFCFFA004 */
-};
-
-#ifdef __STDC__
-static const double qr3[6] = {
-#else
-static double qr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -5.07831226461766561369e-09, /* 0xBE35CFA9, 0xD38FC84F */
- -1.02537829820837089745e-01, /* 0xBFBA3FEB, 0x51AEED54 */
- -4.61011581139473403113e+00, /* 0xC01270C2, 0x3302D9FF */
- -5.78472216562783643212e+01, /* 0xC04CEC71, 0xC25D16DA */
- -2.28244540737631695038e+02, /* 0xC06C87D3, 0x4718D55F */
- -2.19210128478909325622e+02, /* 0xC06B66B9, 0x5F5C1BF6 */
-};
-#ifdef __STDC__
-static const double qs3[6] = {
-#else
-static double qs3[6] = {
-#endif
-  4.76651550323729509273e+01, /* 0x4047D523, 0xCCD367E4 */
-  6.73865112676699709482e+02, /* 0x40850EEB, 0xC031EE3E */
-  3.38015286679526343505e+03, /* 0x40AA684E, 0x448E7C9A */
-  5.54772909720722782367e+03, /* 0x40B5ABBA, 0xA61D54A6 */
-  1.90311919338810798763e+03, /* 0x409DBC7A, 0x0DD4DF4B */
- -1.35201191444307340817e+02, /* 0xC060E670, 0x290A311F */
-};
-
-#ifdef __STDC__
-static const double qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static double qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -1.78381727510958865572e-07, /* 0xBE87F126, 0x44C626D2 */
- -1.02517042607985553460e-01, /* 0xBFBA3E8E, 0x9148B010 */
- -2.75220568278187460720e+00, /* 0xC0060484, 0x69BB4EDA */
- -1.96636162643703720221e+01, /* 0xC033A9E2, 0xC168907F */
- -4.23253133372830490089e+01, /* 0xC04529A3, 0xDE104AAA */
- -2.13719211703704061733e+01, /* 0xC0355F36, 0x39CF6E52 */
-};
-#ifdef __STDC__
-static const double qs2[6] = {
-#else
-static double qs2[6] = {
-#endif
-  2.95333629060523854548e+01, /* 0x403D888A, 0x78AE64FF */
-  2.52981549982190529136e+02, /* 0x406F9F68, 0xDB821CBA */
-  7.57502834868645436472e+02, /* 0x4087AC05, 0xCE49A0F7 */
-  7.39393205320467245656e+02, /* 0x40871B25, 0x48D4C029 */
-  1.55949003336666123687e+02, /* 0x40637E5E, 0x3C3ED8D4 */
- -4.95949898822628210127e+00, /* 0xC013D686, 0xE71BE86B */
-};
-
-#ifdef __STDC__
-	static double qone(double x)
-#else
-	static double qone(x)
-	double x;
-#endif
-{
-#ifdef __STDC__
-	const double *p,*q;
-#else
-	double *p,*q;
-#endif
-	double  s,r,z;
-	__int32_t ix;
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qr8; q= qs8;}
-	else if(ix>=0x40122E8B){p = qr5; q= qs5;}
-	else if(ix>=0x4006DB6D){p = qr3; q= qs3;}
-      else {p = qr2; q= qs2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (.375 + r/s)/x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_remainder.c b/newlib/libm/mathfp/e_remainder.c
deleted file mode 100644
index 02a714d5b..000000000
--- a/newlib/libm/mathfp/e_remainder.c
+++ /dev/null
@@ -1,113 +0,0 @@
-
-/* @(#)e_remainder.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<remainder>>, <<remainderf>>---round and  remainder
-INDEX
-        remainder
-INDEX
-        remainderf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double remainder(double <[x]>, double <[y]>);
-        float remainderf(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double remainder(<[x]>,<[y]>)
-        double <[x]>, <[y]>;
-        float remainderf(<[x]>,<[y]>)
-        float <[x]>, <[y]>;
-
-DESCRIPTION
-<<remainder>> and <<remainderf>> find the remainder of
-<[x]>/<[y]>; this value is in the range -<[y]>/2 .. +<[y]>/2.
-
-RETURNS
-<<remainder>> returns the integer result as a double.
-
-PORTABILITY
-<<remainder>> is a System V release 4.
-<<remainderf>> is an extension.
-
-*/
-
-/* remainder(x,p)
- * Return :                  
- * 	returns  x REM p  =  x - [x/p]*p as if in infinite 
- * 	precise arithmetic, where [x/p] is the (infinite bit) 
- *	integer nearest x/p (in half way case choose the even one).
- * Method : 
- *	Based on fmod() return x-[x/p]chopped*p exactlp.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double zero = 0.0;
-#else
-static double zero = 0.0;
-#endif
-
-
-#ifdef __STDC__
-	double remainder(double x, double p)
-#else
-	double remainder(x,p)
-	double x,p;
-#endif
-{
-	__int32_t hx,hp;
-	__uint32_t sx,lx,lp;
-	double p_half;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hp,lp,p);
-	sx = hx&0x80000000;
-	hp &= 0x7fffffff;
-	hx &= 0x7fffffff;
-
-    /* purge off exception values */
-	if((hp|lp)==0) return (x*p)/(x*p); 	/* p = 0 */
-	if((hx>=0x7ff00000)||			/* x not finite */
-	  ((hp>=0x7ff00000)&&			/* p is NaN */
-	  (((hp-0x7ff00000)|lp)!=0)))
-	    return (x*p)/(x*p);
-
-
-	if (hp<=0x7fdfffff) x = fmod(x,p+p);	/* now x < 2p */
-	if (((hx-hp)|(lx-lp))==0) return zero*x;
-	x  = fabs(x);
-	p  = fabs(p);
-	if (hp<0x00200000) {
-	    if(x+x>p) {
-		x-=p;
-		if(x+x>=p) x -= p;
-	    }
-	} else {
-	    p_half = 0.5*p;
-	    if(x>p_half) {
-		x-=p;
-		if(x>=p_half) x -= p;
-	    }
-	}
-	GET_HIGH_WORD(hx,x);
-	SET_HIGH_WORD(x,hx^sx);
-	return x;
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/e_scalb.c b/newlib/libm/mathfp/e_scalb.c
deleted file mode 100644
index c4056e03b..000000000
--- a/newlib/libm/mathfp/e_scalb.c
+++ /dev/null
@@ -1,55 +0,0 @@
-
-/* @(#)e_scalb.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * __ieee754_scalb(x, fn) is provide for
- * passing various standard test suite. One 
- * should use scalbn() instead.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef _SCALB_INT
-#ifdef __STDC__
-	double scalb(double x, int fn)
-#else
-	double scalb(x,fn)
-	double x; int fn;
-#endif
-#else
-#ifdef __STDC__
-	double scalb(double x, double fn)
-#else
-	double scalb(x,fn)
-	double x, fn;
-#endif
-#endif
-{
-#ifdef _SCALB_INT
-	return scalbn(x,fn);
-#else
-	if (isnan(x)||isnan(fn)) return x*fn;
-	if (!finite(fn)) {
-	    if(fn>0.0) return x*fn;
-	    else       return x/(-fn);
-	}
-	if (rint(fn)!=fn) return (fn-fn)/(fn-fn);
-	if ( fn > 65000.0) return scalbn(x, 65000);
-	if (-fn > 65000.0) return scalbn(x,-65000);
-	return scalbn(x,(int)fn);
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/ef_acosh.c b/newlib/libm/mathfp/ef_acosh.c
deleted file mode 100644
index 705be4986..000000000
--- a/newlib/libm/mathfp/ef_acosh.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* ef_acosh.c -- float version of e_acosh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one	= 1.0,
-ln2	= 6.9314718246e-01;  /* 0x3f317218 */
-
-#ifdef __STDC__
-	float acoshf(float x)
-#else
-	float acoshf(x)
-	float x;
-#endif
-{	
-	float t;
-	__int32_t hx;
-	GET_FLOAT_WORD(hx,x);
-	if(hx<0x3f800000) {		/* x < 1 */
-	    return (x-x)/(x-x);
-	} else if(hx >=0x4d800000) {	/* x > 2**28 */
-	    if(hx >=0x7f800000) {	/* x is inf of NaN */
-	        return x+x;
-	    } else 
-		return logf(x)+ln2;	/* acosh(huge)=log(2x) */
-	} else if (hx==0x3f800000) {
-	    return 0.0;			/* acosh(1) = 0 */
-	} else if (hx > 0x40000000) {	/* 2**28 > x > 2 */
-	    t=x*x;
-	    return logf((float)2.0*x-one/(x+sqrtf(t-one)));
-	} else {			/* 1<x<2 */
-	    t = x-one;
-	    return log1pf(t+sqrtf((float)2.0*t+t*t));
-	}
-}
diff --git a/newlib/libm/mathfp/ef_atanh.c b/newlib/libm/mathfp/ef_atanh.c
deleted file mode 100644
index bfc40dec1..000000000
--- a/newlib/libm/mathfp/ef_atanh.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* ef_atanh.c -- float version of e_atanh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float one = 1.0, huge = 1e30;
-#else
-static float one = 1.0, huge = 1e30;
-#endif
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	float atanhf(float x)
-#else
-	float atanhf(x)
-	float x;
-#endif
-{
-	float t;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if (ix>0x3f800000) 		/* |x|>1 */
-	    return (x-x)/(x-x);
-	if(ix==0x3f800000) 
-	    return x/zero;
-	if(ix<0x31800000&&(huge+x)>zero) return x;	/* x<2**-28 */
-	SET_FLOAT_WORD(x,ix);
-	if(ix<0x3f000000) {		/* x < 0.5 */
-	    t = x+x;
-	    t = (float)0.5*log1pf(t+t*x/(one-x));
-	} else 
-	    t = (float)0.5*log1pf((x+x)/(one-x));
-	if(hx>=0) return t; else return -t;
-}
diff --git a/newlib/libm/mathfp/ef_hypot.c b/newlib/libm/mathfp/ef_hypot.c
deleted file mode 100644
index 8e5f4ccef..000000000
--- a/newlib/libm/mathfp/ef_hypot.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* ef_hypot.c -- float version of e_hypot.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float hypotf(float x, float y)
-#else
-	float hypotf(x,y)
-	float x, y;
-#endif
-{
-	float a=x,b=y,t1,t2,y1,y2,w;
-	__int32_t j,k,ha,hb;
-
-	GET_FLOAT_WORD(ha,x);
-	ha &= 0x7fffffffL;
-	GET_FLOAT_WORD(hb,y);
-	hb &= 0x7fffffffL;
-	if(hb > ha) {a=y;b=x;j=ha; ha=hb;hb=j;} else {a=x;b=y;}
-	SET_FLOAT_WORD(a,ha);	/* a <- |a| */
-	SET_FLOAT_WORD(b,hb);	/* b <- |b| */
-	if((ha-hb)>0xf000000L) {return a+b;} /* x/y > 2**30 */
-	k=0;
-	if(ha > 0x58800000L) {	/* a>2**50 */
-	   if(ha >= 0x7f800000L) {	/* Inf or NaN */
-	       w = a+b;			/* for sNaN */
-	       if(ha == 0x7f800000L) w = a;
-	       if(hb == 0x7f800000L) w = b;
-	       return w;
-	   }
-	   /* scale a and b by 2**-60 */
-	   ha -= 0x5d800000L; hb -= 0x5d800000L;	k += 60;
-	   SET_FLOAT_WORD(a,ha);
-	   SET_FLOAT_WORD(b,hb);
-	}
-	if(hb < 0x26800000L) {	/* b < 2**-50 */
-	    if(hb <= 0x007fffffL) {	/* subnormal b or 0 */	
-	        if(hb==0) return a;
-		SET_FLOAT_WORD(t1,0x3f000000L);	/* t1=2^126 */
-		b *= t1;
-		a *= t1;
-		k -= 126;
-	    } else {		/* scale a and b by 2^60 */
-	        ha += 0x5d800000; 	/* a *= 2^60 */
-		hb += 0x5d800000;	/* b *= 2^60 */
-		k -= 60;
-		SET_FLOAT_WORD(a,ha);
-		SET_FLOAT_WORD(b,hb);
-	    }
-	}
-    /* medium size a and b */
-	w = a-b;
-	if (w>b) {
-	    SET_FLOAT_WORD(t1,ha&0xfffff000L);
-	    t2 = a-t1;
-	    w  = sqrtf(t1*t1-(b*(-b)-t2*(a+t1)));
-	} else {
-	    a  = a+a;
-	    SET_FLOAT_WORD(y1,hb&0xfffff000L);
-	    y2 = b - y1;
-	    SET_FLOAT_WORD(t1,ha+0x00800000L);
-	    t2 = a - t1;
-	    w  = sqrtf(t1*y1-(w*(-w)-(t1*y2+t2*b)));
-	}
-	if(k!=0) {
-	    SET_FLOAT_WORD(t1,0x3f800000L+(k<<23));
-	    return t1*w;
-	} else return w;
-}
diff --git a/newlib/libm/mathfp/ef_j0.c b/newlib/libm/mathfp/ef_j0.c
deleted file mode 100644
index e4cc1081f..000000000
--- a/newlib/libm/mathfp/ef_j0.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/* ef_j0.c -- float version of e_j0.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static float pzerof(float), qzerof(float);
-#else
-static float pzerof(), qzerof();
-#endif
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-huge 	= 1e30,
-one	= 1.0,
-invsqrtpi=  5.6418961287e-01, /* 0x3f106ebb */
-tpi      =  6.3661974669e-01, /* 0x3f22f983 */
- 		/* R0/S0 on [0, 2.00] */
-R02  =  1.5625000000e-02, /* 0x3c800000 */
-R03  = -1.8997929874e-04, /* 0xb947352e */
-R04  =  1.8295404516e-06, /* 0x35f58e88 */
-R05  = -4.6183270541e-09, /* 0xb19eaf3c */
-S01  =  1.5619102865e-02, /* 0x3c7fe744 */
-S02  =  1.1692678527e-04, /* 0x38f53697 */
-S03  =  5.1354652442e-07, /* 0x3509daa6 */
-S04  =  1.1661400734e-09; /* 0x30a045e8 */
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-#ifdef __STDC__
-	float j0f(float x) 
-#else
-	float j0f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,r,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) return one/(x*x);
-	x = fabsf(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sinf(x);
-		c = cosf(x);
-		ss = s-c;
-		cc = s+c;
-		if(ix<0x7f000000) {  /* make sure x+x not overflow */
-		    z = -cosf(x+x);
-		    if ((s*c)<zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x80000000) z = (invsqrtpi*cc)/sqrtf(x);
-		else {
-		    u = pzerof(x); v = qzerof(x);
-		    z = invsqrtpi*(u*cc-v*ss)/sqrtf(x);
-		}
-		return z;
-	}
-	if(ix<0x39000000) {	/* |x| < 2**-13 */
-	    if(huge+x>one) {	/* raise inexact if x != 0 */
-	        if(ix<0x32000000) return one;	/* |x|<2**-27 */
-	        else 	      return one - (float)0.25*x*x;
-	    }
-	}
-	z = x*x;
-	r =  z*(R02+z*(R03+z*(R04+z*R05)));
-	s =  one+z*(S01+z*(S02+z*(S03+z*S04)));
-	if(ix < 0x3F800000) {	/* |x| < 1.00 */
-	    return one + z*((float)-0.25+(r/s));
-	} else {
-	    u = (float)0.5*x;
-	    return((one+u)*(one-u)+z*(r/s));
-	}
-}
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-u00  = -7.3804296553e-02, /* 0xbd9726b5 */
-u01  =  1.7666645348e-01, /* 0x3e34e80d */
-u02  = -1.3818567619e-02, /* 0xbc626746 */
-u03  =  3.4745343146e-04, /* 0x39b62a69 */
-u04  = -3.8140706238e-06, /* 0xb67ff53c */
-u05  =  1.9559013964e-08, /* 0x32a802ba */
-u06  = -3.9820518410e-11, /* 0xae2f21eb */
-v01  =  1.2730483897e-02, /* 0x3c509385 */
-v02  =  7.6006865129e-05, /* 0x389f65e0 */
-v03  =  2.5915085189e-07, /* 0x348b216c */
-v04  =  4.4111031494e-10; /* 0x2ff280c2 */
-
-#ifdef __STDC__
-	float y0f(float x) 
-#else
-	float y0f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-        ix = 0x7fffffff&hx;
-    /* Y0(NaN) is NaN, y0(-inf) is Nan, y0(inf) is 0  */
-	if(ix>=0x7f800000) return  one/(x+x*x); 
-        if(ix==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-        /* y0(x) = sqrt(2/(pi*x))*(p0(x)*sin(x0)+q0(x)*cos(x0))
-         * where x0 = x-pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
-         *                      =  1/sqrt(2) * (sin(x) + cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                s = sinf(x);
-                c = cosf(x);
-                ss = s-c;
-                cc = s+c;
-	/*
-	 * j0(x) = 1/sqrt(pi) * (P(0,x)*cc - Q(0,x)*ss) / sqrt(x)
-	 * y0(x) = 1/sqrt(pi) * (P(0,x)*ss + Q(0,x)*cc) / sqrt(x)
-	 */
-                if(ix<0x7f000000) {  /* make sure x+x not overflow */
-                    z = -cosf(x+x);
-                    if ((s*c)<zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-                if(ix>0x80000000) z = (invsqrtpi*ss)/sqrtf(x);
-                else {
-                    u = pzerof(x); v = qzerof(x);
-                    z = invsqrtpi*(u*ss+v*cc)/sqrtf(x);
-                }
-                return z;
-	}
-	if(ix<=0x32000000) {	/* x < 2**-27 */
-	    return(u00 + tpi*logf(x));
-	}
-	z = x*x;
-	u = u00+z*(u01+z*(u02+z*(u03+z*(u04+z*(u05+z*u06)))));
-	v = one+z*(v01+z*(v02+z*(v03+z*v04)));
-	return(u/v + tpi*(j0f(x)*logf(x)));
-}
-
-/* The asymptotic expansions of pzero is
- *	1 - 9/128 s^2 + 11025/98304 s^4 - ...,	where s = 1/x.
- * For x >= 2, We approximate pzero by
- * 	pzero(x) = 1 + (R/S)
- * where  R = pR0 + pR1*s^2 + pR2*s^4 + ... + pR5*s^10
- * 	  S = 1 + pS0*s^2 + ... + pS4*s^10
- * and
- *	| pzero(x)-1-R/S | <= 2  ** ( -60.26)
- */
-#ifdef __STDC__
-static const float pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float pR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
- -7.0312500000e-02, /* 0xbd900000 */
- -8.0816707611e+00, /* 0xc1014e86 */
- -2.5706311035e+02, /* 0xc3808814 */
- -2.4852163086e+03, /* 0xc51b5376 */
- -5.2530439453e+03, /* 0xc5a4285a */
-};
-#ifdef __STDC__
-static const float pS8[5] = {
-#else
-static float pS8[5] = {
-#endif
-  1.1653436279e+02, /* 0x42e91198 */
-  3.8337448730e+03, /* 0x456f9beb */
-  4.0597855469e+04, /* 0x471e95db */
-  1.1675296875e+05, /* 0x47e4087c */
-  4.7627726562e+04, /* 0x473a0bba */
-};
-#ifdef __STDC__
-static const float pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float pR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -1.1412546255e-11, /* 0xad48c58a */
- -7.0312492549e-02, /* 0xbd8fffff */
- -4.1596107483e+00, /* 0xc0851b88 */
- -6.7674766541e+01, /* 0xc287597b */
- -3.3123129272e+02, /* 0xc3a59d9b */
- -3.4643338013e+02, /* 0xc3ad3779 */
-};
-#ifdef __STDC__
-static const float pS5[5] = {
-#else
-static float pS5[5] = {
-#endif
-  6.0753936768e+01, /* 0x42730408 */
-  1.0512523193e+03, /* 0x44836813 */
-  5.9789707031e+03, /* 0x45bad7c4 */
-  9.6254453125e+03, /* 0x461665c8 */
-  2.4060581055e+03, /* 0x451660ee */
-};
-
-#ifdef __STDC__
-static const float pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static float pR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -2.5470459075e-09, /* 0xb12f081b */
- -7.0311963558e-02, /* 0xbd8fffb8 */
- -2.4090321064e+00, /* 0xc01a2d95 */
- -2.1965976715e+01, /* 0xc1afba52 */
- -5.8079170227e+01, /* 0xc2685112 */
- -3.1447946548e+01, /* 0xc1fb9565 */
-};
-#ifdef __STDC__
-static const float pS3[5] = {
-#else
-static float pS3[5] = {
-#endif
-  3.5856033325e+01, /* 0x420f6c94 */
-  3.6151397705e+02, /* 0x43b4c1ca */
-  1.1936077881e+03, /* 0x44953373 */
-  1.1279968262e+03, /* 0x448cffe6 */
-  1.7358093262e+02, /* 0x432d94b8 */
-};
-
-#ifdef __STDC__
-static const float pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float pR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -8.8753431271e-08, /* 0xb3be98b7 */
- -7.0303097367e-02, /* 0xbd8ffb12 */
- -1.4507384300e+00, /* 0xbfb9b1cc */
- -7.6356959343e+00, /* 0xc0f4579f */
- -1.1193166733e+01, /* 0xc1331736 */
- -3.2336456776e+00, /* 0xc04ef40d */
-};
-#ifdef __STDC__
-static const float pS2[5] = {
-#else
-static float pS2[5] = {
-#endif
-  2.2220300674e+01, /* 0x41b1c32d */
-  1.3620678711e+02, /* 0x430834f0 */
-  2.7047027588e+02, /* 0x43873c32 */
-  1.5387539673e+02, /* 0x4319e01a */
-  1.4657617569e+01, /* 0x416a859a */
-};
-
-#ifdef __STDC__
-	static float pzerof(float x)
-#else
-	static float pzerof(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float z,r,s;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x41000000)     {p = pR8; q= pS8;}
-	else if(ix>=0x40f71c58){p = pR5; q= pS5;}
-	else if(ix>=0x4036db68){p = pR3; q= pS3;}
-      else {p = pR2; q= pS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-	return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qzero is
- *	-1/8 s + 75/1024 s^3 - ..., where s = 1/x.
- * We approximate qzero by
- * 	qzero(x) = s*(-1.25 + (R/S))
- * where  R = qR0 + qR1*s^2 + qR2*s^4 + ... + qR5*s^10
- * 	  S = 1 + qS0*s^2 + ... + qS5*s^12
- * and
- *	| qzero(x)/s +1.25-R/S | <= 2  ** ( -61.22)
- */
-#ifdef __STDC__
-static const float qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float qR8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
-  7.3242187500e-02, /* 0x3d960000 */
-  1.1768206596e+01, /* 0x413c4a93 */
-  5.5767340088e+02, /* 0x440b6b19 */
-  8.8591972656e+03, /* 0x460a6cca */
-  3.7014625000e+04, /* 0x471096a0 */
-};
-#ifdef __STDC__
-static const float qS8[6] = {
-#else
-static float qS8[6] = {
-#endif
-  1.6377603149e+02, /* 0x4323c6aa */
-  8.0983447266e+03, /* 0x45fd12c2 */
-  1.4253829688e+05, /* 0x480b3293 */
-  8.0330925000e+05, /* 0x49441ed4 */
-  8.4050156250e+05, /* 0x494d3359 */
- -3.4389928125e+05, /* 0xc8a7eb69 */
-};
-
-#ifdef __STDC__
-static const float qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float qR5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.8408595828e-11, /* 0x2da1ec79 */
-  7.3242180049e-02, /* 0x3d95ffff */
-  5.8356351852e+00, /* 0x40babd86 */
-  1.3511157227e+02, /* 0x43071c90 */
-  1.0272437744e+03, /* 0x448067cd */
-  1.9899779053e+03, /* 0x44f8bf4b */
-};
-#ifdef __STDC__
-static const float qS5[6] = {
-#else
-static float qS5[6] = {
-#endif
-  8.2776611328e+01, /* 0x42a58da0 */
-  2.0778142090e+03, /* 0x4501dd07 */
-  1.8847289062e+04, /* 0x46933e94 */
-  5.6751113281e+04, /* 0x475daf1d */
-  3.5976753906e+04, /* 0x470c88c1 */
- -5.3543427734e+03, /* 0xc5a752be */
-};
-
-#ifdef __STDC__
-static const float qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#else
-static float qR3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  4.3774099900e-09, /* 0x3196681b */
-  7.3241114616e-02, /* 0x3d95ff70 */
-  3.3442313671e+00, /* 0x405607e3 */
-  4.2621845245e+01, /* 0x422a7cc5 */
-  1.7080809021e+02, /* 0x432acedf */
-  1.6673394775e+02, /* 0x4326bbe4 */
-};
-#ifdef __STDC__
-static const float qS3[6] = {
-#else
-static float qS3[6] = {
-#endif
-  4.8758872986e+01, /* 0x42430916 */
-  7.0968920898e+02, /* 0x44316c1c */
-  3.7041481934e+03, /* 0x4567825f */
-  6.4604252930e+03, /* 0x45c9e367 */
-  2.5163337402e+03, /* 0x451d4557 */
- -1.4924745178e+02, /* 0xc3153f59 */
-};
-
-#ifdef __STDC__
-static const float qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float qR2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.5044444979e-07, /* 0x342189db */
-  7.3223426938e-02, /* 0x3d95f62a */
-  1.9981917143e+00, /* 0x3fffc4bf */
-  1.4495602608e+01, /* 0x4167edfd */
-  3.1666231155e+01, /* 0x41fd5471 */
-  1.6252708435e+01, /* 0x4182058c */
-};
-#ifdef __STDC__
-static const float qS2[6] = {
-#else
-static float qS2[6] = {
-#endif
-  3.0365585327e+01, /* 0x41f2ecb8 */
-  2.6934811401e+02, /* 0x4386ac8f */
-  8.4478375244e+02, /* 0x44533229 */
-  8.8293585205e+02, /* 0x445cbbe5 */
-  2.1266638184e+02, /* 0x4354aa98 */
- -5.3109550476e+00, /* 0xc0a9f358 */
-};
-
-#ifdef __STDC__
-	static float qzerof(float x)
-#else
-	static float qzerof(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float s,r,z;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x41000000)     {p = qR8; q= qS8;}
-	else if(ix>=0x40f71c58){p = qR5; q= qS5;}
-	else if(ix>=0x4036db68){p = qR3; q= qS3;}
-      else {p = qR2; q= qS2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return (-(float).125 + r/s)/x;
-}
diff --git a/newlib/libm/mathfp/ef_j1.c b/newlib/libm/mathfp/ef_j1.c
deleted file mode 100644
index 636a4c961..000000000
--- a/newlib/libm/mathfp/ef_j1.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/* ef_j1.c -- float version of e_j1.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static float ponef(float), qonef(float);
-#else
-static float ponef(), qonef();
-#endif
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-huge    = 1e30,
-one	= 1.0,
-invsqrtpi=  5.6418961287e-01, /* 0x3f106ebb */
-tpi      =  6.3661974669e-01, /* 0x3f22f983 */
-	/* R0/S0 on [0,2] */
-r00  = -6.2500000000e-02, /* 0xbd800000 */
-r01  =  1.4070566976e-03, /* 0x3ab86cfd */
-r02  = -1.5995563444e-05, /* 0xb7862e36 */
-r03  =  4.9672799207e-08, /* 0x335557d2 */
-s01  =  1.9153760746e-02, /* 0x3c9ce859 */
-s02  =  1.8594678841e-04, /* 0x3942fab6 */
-s03  =  1.1771846857e-06, /* 0x359dffc2 */
-s04  =  5.0463624390e-09, /* 0x31ad6446 */
-s05  =  1.2354227016e-11; /* 0x2d59567e */
-
-#ifdef __STDC__
-static const float zero    = 0.0;
-#else
-static float zero    = 0.0;
-#endif
-
-#ifdef __STDC__
-	float j1f(float x) 
-#else
-	float j1f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,r,u,v,y;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) return one/x;
-	y = fabsf(x);
-	if(ix >= 0x40000000) {	/* |x| >= 2.0 */
-		s = sinf(y);
-		c = cosf(y);
-		ss = -s-c;
-		cc = s-c;
-		if(ix<0x7f000000) {  /* make sure y+y not overflow */
-		    z = cosf(y+y);
-		    if ((s*c)>zero) cc = z/ss;
-		    else 	    ss = z/cc;
-		}
-	/*
-	 * j1(x) = 1/sqrt(pi) * (P(1,x)*cc - Q(1,x)*ss) / sqrt(x)
-	 * y1(x) = 1/sqrt(pi) * (P(1,x)*ss + Q(1,x)*cc) / sqrt(x)
-	 */
-		if(ix>0x80000000) z = (invsqrtpi*cc)/sqrtf(y);
-		else {
-		    u = ponef(y); v = qonef(y);
-		    z = invsqrtpi*(u*cc-v*ss)/sqrtf(y);
-		}
-		if(hx<0) return -z;
-		else  	 return  z;
-	}
-	if(ix<0x32000000) {	/* |x|<2**-27 */
-	    if(huge+x>one) return (float)0.5*x;/* inexact if x!=0 necessary */
-	}
-	z = x*x;
-	r =  z*(r00+z*(r01+z*(r02+z*r03)));
-	s =  one+z*(s01+z*(s02+z*(s03+z*(s04+z*s05))));
-	r *= x;
-	return(x*(float)0.5+r/s);
-}
-
-#ifdef __STDC__
-static const float U0[5] = {
-#else
-static float U0[5] = {
-#endif
- -1.9605709612e-01, /* 0xbe48c331 */
-  5.0443872809e-02, /* 0x3d4e9e3c */
- -1.9125689287e-03, /* 0xbafaaf2a */
-  2.3525259166e-05, /* 0x37c5581c */
- -9.1909917899e-08, /* 0xb3c56003 */
-};
-#ifdef __STDC__
-static const float V0[5] = {
-#else
-static float V0[5] = {
-#endif
-  1.9916731864e-02, /* 0x3ca3286a */
-  2.0255257550e-04, /* 0x3954644b */
-  1.3560879779e-06, /* 0x35b602d4 */
-  6.2274145840e-09, /* 0x31d5f8eb */
-  1.6655924903e-11, /* 0x2d9281cf */
-};
-
-#ifdef __STDC__
-	float y1f(float x) 
-#else
-	float y1f(x) 
-	float x;
-#endif
-{
-	float z, s,c,ss,cc,u,v;
-	__int32_t hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-        ix = 0x7fffffff&hx;
-    /* if Y1(NaN) is NaN, Y1(-inf) is NaN, Y1(inf) is 0 */
-	if(ix>=0x7f800000) return  one/(x+x*x); 
-        if(ix==0) return -one/zero;
-        if(hx<0) return zero/zero;
-        if(ix >= 0x40000000) {  /* |x| >= 2.0 */
-                s = sinf(x);
-                c = cosf(x);
-                ss = -s-c;
-                cc = s-c;
-                if(ix<0x7f000000) {  /* make sure x+x not overflow */
-                    z = cosf(x+x);
-                    if ((s*c)>zero) cc = z/ss;
-                    else            ss = z/cc;
-                }
-        /* y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x0)+q1(x)*cos(x0))
-         * where x0 = x-3pi/4
-         *      Better formula:
-         *              cos(x0) = cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
-         *                      =  1/sqrt(2) * (sin(x) - cos(x))
-         *              sin(x0) = sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
-         *                      = -1/sqrt(2) * (cos(x) + sin(x))
-         * To avoid cancellation, use
-         *              sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
-         * to compute the worse one.
-         */
-                if(ix>0x48000000) z = (invsqrtpi*ss)/sqrtf(x);
-                else {
-                    u = ponef(x); v = qonef(x);
-                    z = invsqrtpi*(u*ss+v*cc)/sqrtf(x);
-                }
-                return z;
-        } 
-        if(ix<=0x24800000) {    /* x < 2**-54 */
-            return(-tpi/x);
-        } 
-        z = x*x;
-        u = U0[0]+z*(U0[1]+z*(U0[2]+z*(U0[3]+z*U0[4])));
-        v = one+z*(V0[0]+z*(V0[1]+z*(V0[2]+z*(V0[3]+z*V0[4]))));
-        return(x*(u/v) + tpi*(j1f(x)*logf(x)-one/x));
-}
-
-/* For x >= 8, the asymptotic expansions of pone is
- *	1 + 15/128 s^2 - 4725/2^15 s^4 - ...,	where s = 1/x.
- * We approximate pone by
- * 	pone(x) = 1 + (R/S)
- * where  R = pr0 + pr1*s^2 + pr2*s^4 + ... + pr5*s^10
- * 	  S = 1 + ps0*s^2 + ... + ps4*s^10
- * and
- *	| pone(x)-1-R/S | <= 2  ** ( -60.06)
- */
-
-#ifdef __STDC__
-static const float pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float pr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
-  1.1718750000e-01, /* 0x3df00000 */
-  1.3239480972e+01, /* 0x4153d4ea */
-  4.1205184937e+02, /* 0x43ce06a3 */
-  3.8747453613e+03, /* 0x45722bed */
-  7.9144794922e+03, /* 0x45f753d6 */
-};
-#ifdef __STDC__
-static const float ps8[5] = {
-#else
-static float ps8[5] = {
-#endif
-  1.1420736694e+02, /* 0x42e46a2c */
-  3.6509309082e+03, /* 0x45642ee5 */
-  3.6956207031e+04, /* 0x47105c35 */
-  9.7602796875e+04, /* 0x47bea166 */
-  3.0804271484e+04, /* 0x46f0a88b */
-};
-
-#ifdef __STDC__
-static const float pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float pr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
-  1.3199052094e-11, /* 0x2d68333f */
-  1.1718749255e-01, /* 0x3defffff */
-  6.8027510643e+00, /* 0x40d9b023 */
-  1.0830818176e+02, /* 0x42d89dca */
-  5.1763616943e+02, /* 0x440168b7 */
-  5.2871520996e+02, /* 0x44042dc6 */
-};
-#ifdef __STDC__
-static const float ps5[5] = {
-#else
-static float ps5[5] = {
-#endif
-  5.9280597687e+01, /* 0x426d1f55 */
-  9.9140142822e+02, /* 0x4477d9b1 */
-  5.3532670898e+03, /* 0x45a74a23 */
-  7.8446904297e+03, /* 0x45f52586 */
-  1.5040468750e+03, /* 0x44bc0180 */
-};
-
-#ifdef __STDC__
-static const float pr3[6] = {
-#else
-static float pr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
-  3.0250391081e-09, /* 0x314fe10d */
-  1.1718686670e-01, /* 0x3defffab */
-  3.9329774380e+00, /* 0x407bb5e7 */
-  3.5119403839e+01, /* 0x420c7a45 */
-  9.1055007935e+01, /* 0x42b61c2a */
-  4.8559066772e+01, /* 0x42423c7c */
-};
-#ifdef __STDC__
-static const float ps3[5] = {
-#else
-static float ps3[5] = {
-#endif
-  3.4791309357e+01, /* 0x420b2a4d */
-  3.3676245117e+02, /* 0x43a86198 */
-  1.0468714600e+03, /* 0x4482dbe3 */
-  8.9081134033e+02, /* 0x445eb3ed */
-  1.0378793335e+02, /* 0x42cf936c */
-};
-
-#ifdef __STDC__
-static const float pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float pr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
-  1.0771083225e-07, /* 0x33e74ea8 */
-  1.1717621982e-01, /* 0x3deffa16 */
-  2.3685150146e+00, /* 0x401795c0 */
-  1.2242610931e+01, /* 0x4143e1bc */
-  1.7693971634e+01, /* 0x418d8d41 */
-  5.0735230446e+00, /* 0x40a25a4d */
-};
-#ifdef __STDC__
-static const float ps2[5] = {
-#else
-static float ps2[5] = {
-#endif
-  2.1436485291e+01, /* 0x41ab7dec */
-  1.2529022980e+02, /* 0x42fa9499 */
-  2.3227647400e+02, /* 0x436846c7 */
-  1.1767937469e+02, /* 0x42eb5bd7 */
-  8.3646392822e+00, /* 0x4105d590 */
-};
-
-#ifdef __STDC__
-	static float ponef(float x)
-#else
-	static float ponef(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float z,r,s;
-        __int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-        if(ix>=0x41000000)     {p = pr8; q= ps8;}
-        else if(ix>=0x40f71c58){p = pr5; q= ps5;}
-        else if(ix>=0x4036db68){p = pr3; q= ps3;}
-        else {p = pr2; q= ps2;}
-        z = one/(x*x);
-        r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-        s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*q[4]))));
-        return one+ r/s;
-}
-		
-
-/* For x >= 8, the asymptotic expansions of qone is
- *	3/8 s - 105/1024 s^3 - ..., where s = 1/x.
- * We approximate qone by
- * 	qone(x) = s*(0.375 + (R/S))
- * where  R = qr1*s^2 + qr2*s^4 + ... + qr5*s^10
- * 	  S = 1 + qs1*s^2 + ... + qs6*s^12
- * and
- *	| qone(x)/s -0.375-R/S | <= 2  ** ( -61.13)
- */
-
-#ifdef __STDC__
-static const float qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#else
-static float qr8[6] = { /* for x in [inf, 8]=1/[0,0.125] */
-#endif
-  0.0000000000e+00, /* 0x00000000 */
- -1.0253906250e-01, /* 0xbdd20000 */
- -1.6271753311e+01, /* 0xc1822c8d */
- -7.5960174561e+02, /* 0xc43de683 */
- -1.1849806641e+04, /* 0xc639273a */
- -4.8438511719e+04, /* 0xc73d3683 */
-};
-#ifdef __STDC__
-static const float qs8[6] = {
-#else
-static float qs8[6] = {
-#endif
-  1.6139537048e+02, /* 0x43216537 */
-  7.8253862305e+03, /* 0x45f48b17 */
-  1.3387534375e+05, /* 0x4802bcd6 */
-  7.1965775000e+05, /* 0x492fb29c */
-  6.6660125000e+05, /* 0x4922be94 */
- -2.9449025000e+05, /* 0xc88fcb48 */
-};
-
-#ifdef __STDC__
-static const float qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#else
-static float qr5[6] = { /* for x in [8,4.5454]=1/[0.125,0.22001] */
-#endif
- -2.0897993405e-11, /* 0xadb7d219 */
- -1.0253904760e-01, /* 0xbdd1fffe */
- -8.0564479828e+00, /* 0xc100e736 */
- -1.8366960144e+02, /* 0xc337ab6b */
- -1.3731937256e+03, /* 0xc4aba633 */
- -2.6124443359e+03, /* 0xc523471c */
-};
-#ifdef __STDC__
-static const float qs5[6] = {
-#else
-static float qs5[6] = {
-#endif
-  8.1276550293e+01, /* 0x42a28d98 */
-  1.9917987061e+03, /* 0x44f8f98f */
-  1.7468484375e+04, /* 0x468878f8 */
-  4.9851425781e+04, /* 0x4742bb6d */
-  2.7948074219e+04, /* 0x46da5826 */
- -4.7191835938e+03, /* 0xc5937978 */
-};
-
-#ifdef __STDC__
-static const float qr3[6] = {
-#else
-static float qr3[6] = {/* for x in [4.547,2.8571]=1/[0.2199,0.35001] */
-#endif
- -5.0783124372e-09, /* 0xb1ae7d4f */
- -1.0253783315e-01, /* 0xbdd1ff5b */
- -4.6101160049e+00, /* 0xc0938612 */
- -5.7847221375e+01, /* 0xc267638e */
- -2.2824453735e+02, /* 0xc3643e9a */
- -2.1921012878e+02, /* 0xc35b35cb */
-};
-#ifdef __STDC__
-static const float qs3[6] = {
-#else
-static float qs3[6] = {
-#endif
-  4.7665153503e+01, /* 0x423ea91e */
-  6.7386511230e+02, /* 0x4428775e */
-  3.3801528320e+03, /* 0x45534272 */
-  5.5477290039e+03, /* 0x45ad5dd5 */
-  1.9031191406e+03, /* 0x44ede3d0 */
- -1.3520118713e+02, /* 0xc3073381 */
-};
-
-#ifdef __STDC__
-static const float qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#else
-static float qr2[6] = {/* for x in [2.8570,2]=1/[0.3499,0.5] */
-#endif
- -1.7838172539e-07, /* 0xb43f8932 */
- -1.0251704603e-01, /* 0xbdd1f475 */
- -2.7522056103e+00, /* 0xc0302423 */
- -1.9663616180e+01, /* 0xc19d4f16 */
- -4.2325313568e+01, /* 0xc2294d1f */
- -2.1371921539e+01, /* 0xc1aaf9b2 */
-};
-#ifdef __STDC__
-static const float qs2[6] = {
-#else
-static float qs2[6] = {
-#endif
-  2.9533363342e+01, /* 0x41ec4454 */
-  2.5298155212e+02, /* 0x437cfb47 */
-  7.5750280762e+02, /* 0x443d602e */
-  7.3939318848e+02, /* 0x4438d92a */
-  1.5594900513e+02, /* 0x431bf2f2 */
- -4.9594988823e+00, /* 0xc09eb437 */
-};
-
-#ifdef __STDC__
-	static float qonef(float x)
-#else
-	static float qonef(x)
-	float x;
-#endif
-{
-#ifdef __STDC__
-	const float *p,*q;
-#else
-	float *p,*q;
-#endif
-	float  s,r,z;
-	__int32_t ix;
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-	if(ix>=0x40200000)     {p = qr8; q= qs8;}
-	else if(ix>=0x40f71c58){p = qr5; q= qs5;}
-	else if(ix>=0x4036db68){p = qr3; q= qs3;}
-      else {p = qr2; q= qs2;}
-	z = one/(x*x);
-	r = p[0]+z*(p[1]+z*(p[2]+z*(p[3]+z*(p[4]+z*p[5]))));
-	s = one+z*(q[0]+z*(q[1]+z*(q[2]+z*(q[3]+z*(q[4]+z*q[5])))));
-	return ((float).375 + r/s)/x;
-}
diff --git a/newlib/libm/mathfp/ef_remainder.c b/newlib/libm/mathfp/ef_remainder.c
deleted file mode 100644
index 92958efc4..000000000
--- a/newlib/libm/mathfp/ef_remainder.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* ef_remainder.c -- float version of e_remainder.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float zero = 0.0;
-#else
-static float zero = 0.0;
-#endif
-
-
-#ifdef __STDC__
-	float remainderf(float x, float p)
-#else
-	float remainderf(x,p)
-	float x,p;
-#endif
-{
-	__int32_t hx,hp;
-	__uint32_t sx;
-	float p_half;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hp,p);
-	sx = hx&0x80000000;
-	hp &= 0x7fffffff;
-	hx &= 0x7fffffff;
-
-    /* purge off exception values */
-	if(hp==0) return (x*p)/(x*p);	 	/* p = 0 */
-	if((hx>=0x7f800000)||			/* x not finite */
-	  ((hp>0x7f800000)))			/* p is NaN */
-	    return (x*p)/(x*p);
-
-
-	if (hp<=0x7effffff) x = fmodf(x,p+p);	/* now x < 2p */
-	if ((hx-hp)==0) return zero*x;
-	x  = fabsf(x);
-	p  = fabsf(p);
-	if (hp<0x01000000) {
-	    if(x+x>p) {
-		x-=p;
-		if(x+x>=p) x -= p;
-	    }
-	} else {
-	    p_half = (float)0.5*p;
-	    if(x>p_half) {
-		x-=p;
-		if(x>=p_half) x -= p;
-	    }
-	}
-	GET_FLOAT_WORD(hx,x);
-	SET_FLOAT_WORD(x,hx^sx);
-	return x;
-}
diff --git a/newlib/libm/mathfp/ef_scalb.c b/newlib/libm/mathfp/ef_scalb.c
deleted file mode 100644
index 901f17707..000000000
--- a/newlib/libm/mathfp/ef_scalb.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* ef_scalb.c -- float version of e_scalb.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <limits.h>
-
-#ifdef _SCALB_INT
-#ifdef __STDC__
-	float scalbf(float x, int fn)
-#else
-	float scalbf(x,fn)
-	float x; int fn;
-#endif
-#else
-#ifdef __STDC__
-	float scalbf(float x, float fn)
-#else
-	float scalbf(x,fn)
-	float x, fn;
-#endif
-#endif
-{
-#ifdef _SCALB_INT
-	return scalbnf(x,fn);
-#else
-	if (isnanf(x)||isnanf(fn)) return x*fn;
-	if (!finitef(fn)) {
-	    if(fn>(float)0.0) return x*fn;
-	    else       return x/(-fn);
-	}
-	if (rintf(fn)!=fn) return (fn-fn)/(fn-fn);
-#if INT_MAX > 65000
-	if ( fn > (float)65000.0) return scalbnf(x, 65000);
-	if (-fn > (float)65000.0) return scalbnf(x,-65000);
-#else
-	if ( fn > (float)32000.0) return scalbnf(x, 32000);
-	if (-fn > (float)32000.0) return scalbnf(x,-32000);
-#endif
-	return scalbnf(x,(int)fn);
-#endif
-}
diff --git a/newlib/libm/mathfp/er_gamma.c b/newlib/libm/mathfp/er_gamma.c
deleted file mode 100644
index 63758bb43..000000000
--- a/newlib/libm/mathfp/er_gamma.c
+++ /dev/null
@@ -1,32 +0,0 @@
-
-/* @(#)er_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* gamma_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method: See lgamma_r
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	double gamma_r(double x, int *signgamp)
-#else
-	double gamma_r(x,signgamp)
-	double x; int *signgamp;
-#endif
-{
-	return exp (lgamma_r(x,signgamp));
-}
diff --git a/newlib/libm/mathfp/er_lgamma.c b/newlib/libm/mathfp/er_lgamma.c
deleted file mode 100644
index 65d60026e..000000000
--- a/newlib/libm/mathfp/er_lgamma.c
+++ /dev/null
@@ -1,424 +0,0 @@
-
-/* @(#)er_lgamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/*
-FUNCTION
-        <<gamma>>, <<gammaf>>, <<lgamma>>, <<lgammaf>>, <<gamma_r>>,
-        <<gammaf_r>>, <<lgamma_r>>, <<lgammaf_r>>---logarithmic gamma
-        function
-INDEX
-gamma
-INDEX
-gammaf
-INDEX
-lgamma
-INDEX
-lgammaf
-INDEX
-gamma_r
-INDEX
-gammaf_r
-INDEX
-lgamma_r
-INDEX
-lgammaf_r
-
-ANSI_SYNOPSIS
-#include <math.h>
-double gamma(double <[x]>);
-float gammaf(float <[x]>);
-double lgamma(double <[x]>);
-float lgammaf(float <[x]>);
-double gamma_r(double <[x]>, int *<[signgamp]>);
-float gammaf_r(float <[x]>, int *<[signgamp]>);
-double lgamma_r(double <[x]>, int *<[signgamp]>);
-float lgammaf_r(float <[x]>, int *<[signgamp]>);
-
-TRAD_SYNOPSIS
-#include <math.h>
-double gamma(<[x]>)
-double <[x]>;
-float gammaf(<[x]>)
-float <[x]>;
-double lgamma(<[x]>)
-double <[x]>;
-float lgammaf(<[x]>)
-float <[x]>;
-double gamma_r(<[x]>, <[signgamp]>)
-double <[x]>;
-int <[signgamp]>;
-float gammaf_r(<[x]>, <[signgamp]>)
-float <[x]>;
-int <[signgamp]>;
-double lgamma_r(<[x]>, <[signgamp]>)
-double <[x]>;
-int <[signgamp]>;
-float lgammaf_r(<[x]>, <[signgamp]>)
-float <[x]>;
-int <[signgamp]>;
-
-DESCRIPTION
-<<gamma>> calculates
-@tex
-$\mit ln\bigl(\Gamma(x)\bigr)$,
-@end tex
-the natural logarithm of the gamma function of <[x]>.  The gamma function
-(<<exp(gamma(<[x]>))>>) is a generalization of factorial, and retains
-the property that
-@ifnottex
-<<exp(gamma(N))>> is equivalent to <<N*exp(gamma(N-1))>>.
-@end ifnottex
-@tex
-$\mit \Gamma(N)\equiv N\times\Gamma(N-1)$.
-@end tex
-Accordingly, the results of the gamma function itself grow very
-quickly.  <<gamma>> is defined as
-@tex
-$\mit ln\bigl(\Gamma(x)\bigr)$ rather than simply $\mit \Gamma(x)$
-@end tex
-@ifnottex
-the natural log of the gamma function, rather than the gamma function
-itself,
-@end ifnottex
-to extend the useful range of results representable.
-
-The sign of the result is returned in the global variable <<signgam>>,
-which is declared in math.h.
-
-<<gammaf>> performs the same calculation as <<gamma>>, but uses and
-returns <<float>> values.
-
-<<lgamma>> and <<lgammaf>> are alternate names for <<gamma>> and
-<<gammaf>>.  The use of <<lgamma>> instead of <<gamma>> is a reminder
-that these functions compute the log of the gamma function, rather
-than the gamma function itself.
-
-The functions <<gamma_r>>, <<gammaf_r>>, <<lgamma_r>>, and
-<<lgammaf_r>> are just like <<gamma>>, <<gammaf>>, <<lgamma>>, and
-<<lgammaf>>, respectively, but take an additional argument.  This
-additional argument is a pointer to an integer.  This additional
-argument is used to return the sign of the result, and the global
-variable <<signgam>> is not used.  These functions may be used for
-reentrant calls (but they will still set the global variable <<errno>>
-if an error occurs).
-
-RETURNS
-Normally, the computed result is returned.
-
-When <[x]> is a nonpositive integer, <<gamma>> returns <<HUGE_VAL>>
-and <<errno>> is set to <<EDOM>>.  If the result overflows, <<gamma>>
-returns <<HUGE_VAL>> and <<errno>> is set to <<ERANGE>>.
-
-You can modify this error treatment using <<matherr>>.
-
-PORTABILITY
-Neither <<gamma>> nor <<gammaf>> is ANSI C.  */
-
-/* lgamma_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method:
- *   1. Argument Reduction for 0 < x <= 8
- * 	Since gamma(1+s)=s*gamma(s), for x in [0,8], we may 
- * 	reduce x to a number in [1.5,2.5] by
- * 		lgamma(1+s) = log(s) + lgamma(s)
- *	for example,
- *		lgamma(7.3) = log(6.3) + lgamma(6.3)
- *			    = log(6.3*5.3) + lgamma(5.3)
- *			    = log(6.3*5.3*4.3*3.3*2.3) + lgamma(2.3)
- *   2. Polynomial approximation of lgamma around its
- *	minimun ymin=1.461632144968362245 to maintain monotonicity.
- *	On [ymin-0.23, ymin+0.27] (i.e., [1.23164,1.73163]), use
- *		Let z = x-ymin;
- *		lgamma(x) = -1.214862905358496078218 + z^2*poly(z)
- *	where
- *		poly(z) is a 14 degree polynomial.
- *   2. Rational approximation in the primary interval [2,3]
- *	We use the following approximation:
- *		s = x-2.0;
- *		lgamma(x) = 0.5*s + s*P(s)/Q(s)
- *	with accuracy
- *		|P/Q - (lgamma(x)-0.5s)| < 2**-61.71
- *	Our algorithms are based on the following observation
- *
- *                             zeta(2)-1    2    zeta(3)-1    3
- * lgamma(2+s) = s*(1-Euler) + --------- * s  -  --------- * s  + ...
- *                                 2                 3
- *
- *	where Euler = 0.5771... is the Euler constant, which is very
- *	close to 0.5.
- *
- *   3. For x>=8, we have
- *	lgamma(x)~(x-0.5)log(x)-x+0.5*log(2pi)+1/(12x)-1/(360x**3)+....
- *	(better formula:
- *	   lgamma(x)~(x-0.5)*(log(x)-1)-.5*(log(2pi)-1) + ...)
- *	Let z = 1/x, then we approximation
- *		f(z) = lgamma(x) - (x-0.5)(log(x)-1)
- *	by
- *	  			    3       5             11
- *		w = w0 + w1*z + w2*z  + w3*z  + ... + w6*z
- *	where 
- *		|w - f(z)| < 2**-58.74
- *		
- *   4. For negative x, since (G is gamma function)
- *		-x*G(-x)*G(x) = pi/sin(pi*x),
- * 	we have
- * 		G(x) = pi/(sin(pi*x)*(-x)*G(-x))
- *	since G(-x) is positive, sign(G(x)) = sign(sin(pi*x)) for x<0
- *	Hence, for x<0, signgam = sign(sin(pi*x)) and 
- *		lgamma(x) = log(|Gamma(x)|)
- *			  = log(pi/(|x*sin(pi*x)|)) - lgamma(-x);
- *	Note: one should avoid compute pi*(-x) directly in the 
- *	      computation of sin(pi*(-x)).
- *		
- *   5. Special Cases
- *		lgamma(2+s) ~ s*(1-Euler) for tiny s
- *		lgamma(1)=lgamma(2)=0
- *		lgamma(x) ~ -log(x) for tiny x
- *		lgamma(0) = lgamma(inf) = inf
- *	 	lgamma(-integer) = +-inf
- *	
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-two52=  4.50359962737049600000e+15, /* 0x43300000, 0x00000000 */
-half=  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-pi  =  3.14159265358979311600e+00, /* 0x400921FB, 0x54442D18 */
-a0  =  7.72156649015328655494e-02, /* 0x3FB3C467, 0xE37DB0C8 */
-a1  =  3.22467033424113591611e-01, /* 0x3FD4A34C, 0xC4A60FAD */
-a2  =  6.73523010531292681824e-02, /* 0x3FB13E00, 0x1A5562A7 */
-a3  =  2.05808084325167332806e-02, /* 0x3F951322, 0xAC92547B */
-a4  =  7.38555086081402883957e-03, /* 0x3F7E404F, 0xB68FEFE8 */
-a5  =  2.89051383673415629091e-03, /* 0x3F67ADD8, 0xCCB7926B */
-a6  =  1.19270763183362067845e-03, /* 0x3F538A94, 0x116F3F5D */
-a7  =  5.10069792153511336608e-04, /* 0x3F40B6C6, 0x89B99C00 */
-a8  =  2.20862790713908385557e-04, /* 0x3F2CF2EC, 0xED10E54D */
-a9  =  1.08011567247583939954e-04, /* 0x3F1C5088, 0x987DFB07 */
-a10 =  2.52144565451257326939e-05, /* 0x3EFA7074, 0x428CFA52 */
-a11 =  4.48640949618915160150e-05, /* 0x3F07858E, 0x90A45837 */
-tc  =  1.46163214496836224576e+00, /* 0x3FF762D8, 0x6356BE3F */
-tf  = -1.21486290535849611461e-01, /* 0xBFBF19B9, 0xBCC38A42 */
-/* tt = -(tail of tf) */
-tt  = -3.63867699703950536541e-18, /* 0xBC50C7CA, 0xA48A971F */
-t0  =  4.83836122723810047042e-01, /* 0x3FDEF72B, 0xC8EE38A2 */
-t1  = -1.47587722994593911752e-01, /* 0xBFC2E427, 0x8DC6C509 */
-t2  =  6.46249402391333854778e-02, /* 0x3FB08B42, 0x94D5419B */
-t3  = -3.27885410759859649565e-02, /* 0xBFA0C9A8, 0xDF35B713 */
-t4  =  1.79706750811820387126e-02, /* 0x3F9266E7, 0x970AF9EC */
-t5  = -1.03142241298341437450e-02, /* 0xBF851F9F, 0xBA91EC6A */
-t6  =  6.10053870246291332635e-03, /* 0x3F78FCE0, 0xE370E344 */
-t7  = -3.68452016781138256760e-03, /* 0xBF6E2EFF, 0xB3E914D7 */
-t8  =  2.25964780900612472250e-03, /* 0x3F6282D3, 0x2E15C915 */
-t9  = -1.40346469989232843813e-03, /* 0xBF56FE8E, 0xBF2D1AF1 */
-t10 =  8.81081882437654011382e-04, /* 0x3F4CDF0C, 0xEF61A8E9 */
-t11 = -5.38595305356740546715e-04, /* 0xBF41A610, 0x9C73E0EC */
-t12 =  3.15632070903625950361e-04, /* 0x3F34AF6D, 0x6C0EBBF7 */
-t13 = -3.12754168375120860518e-04, /* 0xBF347F24, 0xECC38C38 */
-t14 =  3.35529192635519073543e-04, /* 0x3F35FD3E, 0xE8C2D3F4 */
-u0  = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
-u1  =  6.32827064025093366517e-01, /* 0x3FE4401E, 0x8B005DFF */
-u2  =  1.45492250137234768737e+00, /* 0x3FF7475C, 0xD119BD6F */
-u3  =  9.77717527963372745603e-01, /* 0x3FEF4976, 0x44EA8450 */
-u4  =  2.28963728064692451092e-01, /* 0x3FCD4EAE, 0xF6010924 */
-u5  =  1.33810918536787660377e-02, /* 0x3F8B678B, 0xBF2BAB09 */
-v1  =  2.45597793713041134822e+00, /* 0x4003A5D7, 0xC2BD619C */
-v2  =  2.12848976379893395361e+00, /* 0x40010725, 0xA42B18F5 */
-v3  =  7.69285150456672783825e-01, /* 0x3FE89DFB, 0xE45050AF */
-v4  =  1.04222645593369134254e-01, /* 0x3FBAAE55, 0xD6537C88 */
-v5  =  3.21709242282423911810e-03, /* 0x3F6A5ABB, 0x57D0CF61 */
-s0  = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
-s1  =  2.14982415960608852501e-01, /* 0x3FCB848B, 0x36E20878 */
-s2  =  3.25778796408930981787e-01, /* 0x3FD4D98F, 0x4F139F59 */
-s3  =  1.46350472652464452805e-01, /* 0x3FC2BB9C, 0xBEE5F2F7 */
-s4  =  2.66422703033638609560e-02, /* 0x3F9B481C, 0x7E939961 */
-s5  =  1.84028451407337715652e-03, /* 0x3F5E26B6, 0x7368F239 */
-s6  =  3.19475326584100867617e-05, /* 0x3F00BFEC, 0xDD17E945 */
-r1  =  1.39200533467621045958e+00, /* 0x3FF645A7, 0x62C4AB74 */
-r2  =  7.21935547567138069525e-01, /* 0x3FE71A18, 0x93D3DCDC */
-r3  =  1.71933865632803078993e-01, /* 0x3FC601ED, 0xCCFBDF27 */
-r4  =  1.86459191715652901344e-02, /* 0x3F9317EA, 0x742ED475 */
-r5  =  7.77942496381893596434e-04, /* 0x3F497DDA, 0xCA41A95B */
-r6  =  7.32668430744625636189e-06, /* 0x3EDEBAF7, 0xA5B38140 */
-w0  =  4.18938533204672725052e-01, /* 0x3FDACFE3, 0x90C97D69 */
-w1  =  8.33333333333329678849e-02, /* 0x3FB55555, 0x5555553B */
-w2  = -2.77777777728775536470e-03, /* 0xBF66C16C, 0x16B02E5C */
-w3  =  7.93650558643019558500e-04, /* 0x3F4A019F, 0x98CF38B6 */
-w4  = -5.95187557450339963135e-04, /* 0xBF4380CB, 0x8C0FE741 */
-w5  =  8.36339918996282139126e-04, /* 0x3F4B67BA, 0x4CDAD5D1 */
-w6  = -1.63092934096575273989e-03; /* 0xBF5AB89D, 0x0B9E43E4 */
-
-#ifdef __STDC__
-static const double zero=  0.00000000000000000000e+00;
-#else
-static double zero=  0.00000000000000000000e+00;
-#endif
-
-#ifdef __STDC__
-	static double sin_pi(double x)
-#else
-	static double sin_pi(x)
-	double x;
-#endif
-{
-	double y,z;
-	__int32_t n,ix;
-
-	GET_HIGH_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-	if(ix<0x3fd00000) return sin(pi*x);
-	y = -x;		/* x is assume negative */
-
-    /*
-     * argument reduction, make sure inexact flag not raised if input
-     * is an integer
-     */
-	z = floor(y);
-	if(z!=y) {				/* inexact anyway */
-	    y  *= 0.5;
-	    y   = 2.0*(y - floor(y));		/* y = |x| mod 2.0 */
-	    n   = (__int32_t) (y*4.0);
-	} else {
-            if(ix>=0x43400000) {
-                y = zero; n = 0;                 /* y must be even */
-            } else {
-                if(ix<0x43300000) z = y+two52;	/* exact */
-		GET_LOW_WORD(n,z);
-		n &= 1;
-                y  = n;
-                n<<= 2;
-            }
-        }
-	switch (n) {
-	    case 0:   y =  sin(pi*y); break;
-	    case 1:   
-	    case 2:   y =  cos(pi*(0.5-y)); break;
-	    case 3:  
-	    case 4:   y =  sin(pi*(one-y)); break;
-	    case 5:
-	    case 6:   y = -cos(pi*(y-1.5)); break;
-	    default:  y =  sin(pi*(y-2.0)); break;
-	    }
-	return -y;
-}
-
-
-#ifdef __STDC__
-	double lgamma_r(double x, int *signgamp)
-#else
-	double lgamma_r(x,signgamp)
-	double x; int *signgamp;
-#endif
-{
-	double t,y,z,nadj,p,p1,p2,p3,q,r,w;
-	__int32_t i,hx,lx,ix;
-
-        nadj = 0;
-
-	EXTRACT_WORDS(hx,lx,x);
-
-    /* purge off +-inf, NaN, +-0, and negative arguments */
-	*signgamp = 1;
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return x*x;
-	if((ix|lx)==0) return one/zero;
-	if(ix<0x3b900000) {	/* |x|<2**-70, return -log(|x|) */
-	    if(hx<0) {
-	        *signgamp = -1;
-	        return -log(-x);
-	    } else return -log(x);
-	}
-	if(hx<0) {
-	    if(ix>=0x43300000) 	/* |x|>=2**52, must be -integer */
-		return one/zero;
-	    t = sin_pi(x);
-	    if(t==zero) return one/zero; /* -integer */
-	    nadj = log(pi/fabs(t*x));
-	    if(t<zero) *signgamp = -1;
-	    x = -x;
-	}
-
-    /* purge off 1 and 2 */
-	if((((ix-0x3ff00000)|lx)==0)||(((ix-0x40000000)|lx)==0)) r = 0;
-    /* for x < 2.0 */
-	else if(ix<0x40000000) {
-	    if(ix<=0x3feccccc) { 	/* lgamma(x) = lgamma(x+1)-log(x) */
-		r = -log(x);
-		if(ix>=0x3FE76944) {y = one-x; i= 0;}
-		else if(ix>=0x3FCDA661) {y= x-(tc-one); i=1;}
-	  	else {y = x; i=2;}
-	    } else {
-	  	r = zero;
-	        if(ix>=0x3FFBB4C3) {y=2.0-x;i=0;} /* [1.7316,2] */
-	        else if(ix>=0x3FF3B4C4) {y=x-tc;i=1;} /* [1.23,1.73] */
-		else {y=x-one;i=2;}
-	    }
-	    switch(i) {
-	      case 0:
-		z = y*y;
-		p1 = a0+z*(a2+z*(a4+z*(a6+z*(a8+z*a10))));
-		p2 = z*(a1+z*(a3+z*(a5+z*(a7+z*(a9+z*a11)))));
-		p  = y*p1+p2;
-		r  += (p-0.5*y); break;
-	      case 1:
-		z = y*y;
-		w = z*y;
-		p1 = t0+w*(t3+w*(t6+w*(t9 +w*t12)));	/* parallel comp */
-		p2 = t1+w*(t4+w*(t7+w*(t10+w*t13)));
-		p3 = t2+w*(t5+w*(t8+w*(t11+w*t14)));
-		p  = z*p1-(tt-w*(p2+y*p3));
-		r += (tf + p); break;
-	      case 2:	
-		p1 = y*(u0+y*(u1+y*(u2+y*(u3+y*(u4+y*u5)))));
-		p2 = one+y*(v1+y*(v2+y*(v3+y*(v4+y*v5))));
-		r += (-0.5*y + p1/p2);
-	    }
-	}
-	else if(ix<0x40200000) { 			/* x < 8.0 */
-	    i = (__int32_t)x;
-	    t = zero;
-	    y = x-(double)i;
-	    p = y*(s0+y*(s1+y*(s2+y*(s3+y*(s4+y*(s5+y*s6))))));
-	    q = one+y*(r1+y*(r2+y*(r3+y*(r4+y*(r5+y*r6)))));
-	    r = half*y+p/q;
-	    z = one;	/* lgamma(1+s) = log(s) + lgamma(s) */
-	    switch(i) {
-	    case 7: z *= (y+6.0);	/* FALLTHRU */
-	    case 6: z *= (y+5.0);	/* FALLTHRU */
-	    case 5: z *= (y+4.0);	/* FALLTHRU */
-	    case 4: z *= (y+3.0);	/* FALLTHRU */
-	    case 3: z *= (y+2.0);	/* FALLTHRU */
-		    r += log(z); break;
-	    }
-    /* 8.0 <= x < 2**58 */
-	} else if (ix < 0x43900000) {
-	    t = log(x);
-	    z = one/x;
-	    y = z*z;
-	    w = w0+z*(w1+y*(w2+y*(w3+y*(w4+y*(w5+y*w6)))));
-	    r = (x-half)*(t-one)+w;
-	} else 
-    /* 2**58 <= x <= inf */
-	    r =  x*(log(x)-one);
-	if(hx<0) r = nadj - r;
-	return r;
-}
diff --git a/newlib/libm/mathfp/erf_gamma.c b/newlib/libm/mathfp/erf_gamma.c
deleted file mode 100644
index 16be0d040..000000000
--- a/newlib/libm/mathfp/erf_gamma.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* erf_gamma.c -- float version of er_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-/* gammaf_r(x, signgamp)
- * Reentrant version of the logarithm of the Gamma function 
- * with user provide pointer for the sign of Gamma(x). 
- *
- * Method: See lgammaf_r
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float gammaf_r(float x, int *signgamp)
-#else
-	float gammaf_r(x,signgamp)
-	float x; int *signgamp;
-#endif
-{
-	return expf (lgammaf_r(x,signgamp));
-}
diff --git a/newlib/libm/mathfp/erf_lgamma.c b/newlib/libm/mathfp/erf_lgamma.c
deleted file mode 100644
index 64bec0aca..000000000
--- a/newlib/libm/mathfp/erf_lgamma.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* erf_lgamma.c -- float version of er_lgamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- *
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-two23=  8.3886080000e+06, /* 0x4b000000 */
-half=  5.0000000000e-01, /* 0x3f000000 */
-one =  1.0000000000e+00, /* 0x3f800000 */
-pi  =  3.1415927410e+00, /* 0x40490fdb */
-a0  =  7.7215664089e-02, /* 0x3d9e233f */
-a1  =  3.2246702909e-01, /* 0x3ea51a66 */
-a2  =  6.7352302372e-02, /* 0x3d89f001 */
-a3  =  2.0580807701e-02, /* 0x3ca89915 */
-a4  =  7.3855509982e-03, /* 0x3bf2027e */
-a5  =  2.8905137442e-03, /* 0x3b3d6ec6 */
-a6  =  1.1927076848e-03, /* 0x3a9c54a1 */
-a7  =  5.1006977446e-04, /* 0x3a05b634 */
-a8  =  2.2086278477e-04, /* 0x39679767 */
-a9  =  1.0801156895e-04, /* 0x38e28445 */
-a10 =  2.5214456400e-05, /* 0x37d383a2 */
-a11 =  4.4864096708e-05, /* 0x383c2c75 */
-tc  =  1.4616321325e+00, /* 0x3fbb16c3 */
-tf  = -1.2148628384e-01, /* 0xbdf8cdcd */
-/* tt = -(tail of tf) */
-tt  =  6.6971006518e-09, /* 0x31e61c52 */
-t0  =  4.8383611441e-01, /* 0x3ef7b95e */
-t1  = -1.4758771658e-01, /* 0xbe17213c */
-t2  =  6.4624942839e-02, /* 0x3d845a15 */
-t3  = -3.2788541168e-02, /* 0xbd064d47 */
-t4  =  1.7970675603e-02, /* 0x3c93373d */
-t5  = -1.0314224288e-02, /* 0xbc28fcfe */
-t6  =  6.1005386524e-03, /* 0x3bc7e707 */
-t7  = -3.6845202558e-03, /* 0xbb7177fe */
-t8  =  2.2596477065e-03, /* 0x3b141699 */
-t9  = -1.4034647029e-03, /* 0xbab7f476 */
-t10 =  8.8108185446e-04, /* 0x3a66f867 */
-t11 = -5.3859531181e-04, /* 0xba0d3085 */
-t12 =  3.1563205994e-04, /* 0x39a57b6b */
-t13 = -3.1275415677e-04, /* 0xb9a3f927 */
-t14 =  3.3552918467e-04, /* 0x39afe9f7 */
-u0  = -7.7215664089e-02, /* 0xbd9e233f */
-u1  =  6.3282704353e-01, /* 0x3f2200f4 */
-u2  =  1.4549225569e+00, /* 0x3fba3ae7 */
-u3  =  9.7771751881e-01, /* 0x3f7a4bb2 */
-u4  =  2.2896373272e-01, /* 0x3e6a7578 */
-u5  =  1.3381091878e-02, /* 0x3c5b3c5e */
-v1  =  2.4559779167e+00, /* 0x401d2ebe */
-v2  =  2.1284897327e+00, /* 0x4008392d */
-v3  =  7.6928514242e-01, /* 0x3f44efdf */
-v4  =  1.0422264785e-01, /* 0x3dd572af */
-v5  =  3.2170924824e-03, /* 0x3b52d5db */
-s0  = -7.7215664089e-02, /* 0xbd9e233f */
-s1  =  2.1498242021e-01, /* 0x3e5c245a */
-s2  =  3.2577878237e-01, /* 0x3ea6cc7a */
-s3  =  1.4635047317e-01, /* 0x3e15dce6 */
-s4  =  2.6642270386e-02, /* 0x3cda40e4 */
-s5  =  1.8402845599e-03, /* 0x3af135b4 */
-s6  =  3.1947532989e-05, /* 0x3805ff67 */
-r1  =  1.3920053244e+00, /* 0x3fb22d3b */
-r2  =  7.2193557024e-01, /* 0x3f38d0c5 */
-r3  =  1.7193385959e-01, /* 0x3e300f6e */
-r4  =  1.8645919859e-02, /* 0x3c98bf54 */
-r5  =  7.7794247773e-04, /* 0x3a4beed6 */
-r6  =  7.3266842264e-06, /* 0x36f5d7bd */
-w0  =  4.1893854737e-01, /* 0x3ed67f1d */
-w1  =  8.3333335817e-02, /* 0x3daaaaab */
-w2  = -2.7777778450e-03, /* 0xbb360b61 */
-w3  =  7.9365057172e-04, /* 0x3a500cfd */
-w4  = -5.9518753551e-04, /* 0xba1c065c */
-w5  =  8.3633989561e-04, /* 0x3a5b3dd2 */
-w6  = -1.6309292987e-03; /* 0xbad5c4e8 */
-
-#ifdef __STDC__
-static const float zero=  0.0000000000e+00;
-#else
-static float zero=  0.0000000000e+00;
-#endif
-
-#ifdef __STDC__
-	static float sin_pif(float x)
-#else
-	static float sin_pif(x)
-	float x;
-#endif
-{
-	float y,z;
-	__int32_t n,ix;
-
-	GET_FLOAT_WORD(ix,x);
-	ix &= 0x7fffffff;
-
-	if(ix<0x3e800000) return sinf(pi*x);
-	y = -x;		/* x is assume negative */
-
-    /*
-     * argument reduction, make sure inexact flag not raised if input
-     * is an integer
-     */
-	z = floorf(y);
-	if(z!=y) {				/* inexact anyway */
-	    y  *= (float)0.5;
-	    y   = (float)2.0*(y - floorf(y));	/* y = |x| mod 2.0 */
-	    n   = (__int32_t) (y*(float)4.0);
-	} else {
-            if(ix>=0x4b800000) {
-                y = zero; n = 0;                 /* y must be even */
-            } else {
-                if(ix<0x4b000000) z = y+two23;	/* exact */
-		GET_FLOAT_WORD(n,z);
-		n &= 1;
-                y  = n;
-                n<<= 2;
-            }
-        }
-	switch (n) {
-	    case 0:   y =  sinf(pi*y); break;
-	    case 1:   
-	    case 2:   y =  cosf(pi*((float)0.5-y)); break;
-	    case 3:  
-	    case 4:   y =  sinf(pi*(one-y)); break;
-	    case 5:
-	    case 6:   y = -cosf(pi*(y-(float)1.5)); break;
-	    default:  y =  sinf(pi*(y-(float)2.0)); break;
-	    }
-	return -y;
-}
-
-
-#ifdef __STDC__
-	float lgammaf_r(float x, int *signgamp)
-#else
-	float lgammaf_r(x,signgamp)
-	float x; int *signgamp;
-#endif
-{
-	float t,y,z,nadj,p,p1,p2,p3,q,r,w;
-	__int32_t i,hx,ix;
-
-	GET_FLOAT_WORD(hx,x);
-
-        nadj = 0;
-
-        /* purge off +-inf, NaN, +-0, and negative arguments */
-	*signgamp = 1;
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) return x*x;
-	if(ix==0) return one/zero;
-	if(ix<0x1c800000) {	/* |x|<2**-70, return -log(|x|) */
-	    if(hx<0) {
-	        *signgamp = -1;
-	        return -logf(-x);
-	    } else return -logf(x);
-	}
-	if(hx<0) {
-	    if(ix>=0x4b000000) 	/* |x|>=2**23, must be -integer */
-		return one/zero;
-	    t = sin_pif(x);
-	    if(t==zero) return one/zero; /* -integer */
-	    nadj = logf(pi/fabsf(t*x));
-	    if(t<zero) *signgamp = -1;
-	    x = -x;
-	}
-
-    /* purge off 1 and 2 */
-	if (ix==0x3f800000||ix==0x40000000) r = 0;
-    /* for x < 2.0 */
-	else if(ix<0x40000000) {
-	    if(ix<=0x3f666666) { 	/* lgamma(x) = lgamma(x+1)-log(x) */
-		r = -logf(x);
-		if(ix>=0x3f3b4a20) {y = one-x; i= 0;}
-		else if(ix>=0x3e6d3308) {y= x-(tc-one); i=1;}
-	  	else {y = x; i=2;}
-	    } else {
-	  	r = zero;
-	        if(ix>=0x3fdda618) {y=(float)2.0-x;i=0;} /* [1.7316,2] */
-	        else if(ix>=0x3F9da620) {y=x-tc;i=1;} /* [1.23,1.73] */
-		else {y=x-one;i=2;}
-	    }
-	    switch(i) {
-	      case 0:
-		z = y*y;
-		p1 = a0+z*(a2+z*(a4+z*(a6+z*(a8+z*a10))));
-		p2 = z*(a1+z*(a3+z*(a5+z*(a7+z*(a9+z*a11)))));
-		p  = y*p1+p2;
-		r  += (p-(float)0.5*y); break;
-	      case 1:
-		z = y*y;
-		w = z*y;
-		p1 = t0+w*(t3+w*(t6+w*(t9 +w*t12)));	/* parallel comp */
-		p2 = t1+w*(t4+w*(t7+w*(t10+w*t13)));
-		p3 = t2+w*(t5+w*(t8+w*(t11+w*t14)));
-		p  = z*p1-(tt-w*(p2+y*p3));
-		r += (tf + p); break;
-	      case 2:	
-		p1 = y*(u0+y*(u1+y*(u2+y*(u3+y*(u4+y*u5)))));
-		p2 = one+y*(v1+y*(v2+y*(v3+y*(v4+y*v5))));
-		r += (-(float)0.5*y + p1/p2);
-	    }
-	}
-	else if(ix<0x41000000) { 			/* x < 8.0 */
-	    i = (__int32_t)x;
-	    t = zero;
-	    y = x-(float)i;
-	    p = y*(s0+y*(s1+y*(s2+y*(s3+y*(s4+y*(s5+y*s6))))));
-	    q = one+y*(r1+y*(r2+y*(r3+y*(r4+y*(r5+y*r6)))));
-	    r = half*y+p/q;
-	    z = one;	/* lgamma(1+s) = log(s) + lgamma(s) */
-	    switch(i) {
-	    case 7: z *= (y+(float)6.0);	/* FALLTHRU */
-	    case 6: z *= (y+(float)5.0);	/* FALLTHRU */
-	    case 5: z *= (y+(float)4.0);	/* FALLTHRU */
-	    case 4: z *= (y+(float)3.0);	/* FALLTHRU */
-	    case 3: z *= (y+(float)2.0);	/* FALLTHRU */
-		    r += logf(z); break;
-	    }
-    /* 8.0 <= x < 2**58 */
-	} else if (ix < 0x5c800000) {
-	    t = logf(x);
-	    z = one/x;
-	    y = z*z;
-	    w = w0+z*(w1+y*(w2+y*(w3+y*(w4+y*(w5+y*w6)))));
-	    r = (x-half)*(t-one)+w;
-	} else 
-    /* 2**58 <= x <= inf */
-	    r =  x*(logf(x)-one);
-	if(hx<0) r = nadj - r;
-	return r;
-}
diff --git a/newlib/libm/mathfp/mathfp.tex b/newlib/libm/mathfp/mathfp.tex
deleted file mode 100644
index 6286405a0..000000000
--- a/newlib/libm/mathfp/mathfp.tex
+++ /dev/null
@@ -1,199 +0,0 @@
-@node Math
-@chapter Mathematical Functions (@file{math.h})
-
-This chapter groups a wide variety of mathematical functions.  The
-corresponding definitions and declarations are in @file{math.h}.  
-Two definitions from @file{math.h} are of particular interest.  
-
-@enumerate
-@item
-The representation of infinity as a @code{double} is defined as
-@code{HUGE_VAL}; this number is returned on overflow by many functions.
-
-@item
-The structure @code{exception} is used when you write customized error
-handlers for the mathematical functions.  You can customize error
-handling for most of these functions by defining your own version of
-@code{matherr}; see the section on @code{matherr} for details.
-@end enumerate
-
-@cindex system calls
-@cindex support subroutines
-@cindex stubs
-@cindex OS stubs
-Since the error handling code calls @code{fputs}, the mathematical
-subroutines require stubs or minimal implementations for the same list
-of OS subroutines as @code{fputs}: @code{close}, @code{fstat},
-@code{isatty}, @code{lseek}, @code{read}, @code{sbrk}, @code{write}.
-@xref{syscalls,,System Calls, libc.info, The Cygnus C Support Library},
-for a discussion and for sample minimal implementations of these support
-subroutines.
-
-Alternative declarations of the mathematical functions, which exploit
-specific machine capabilities to operate faster---but generally have
-less error checking and may reflect additional limitations on some
-machines---are available when you include @file{fastmath.h} instead of
-@file{math.h}.
-
-@menu 
-* version::	Version of library
-* acos::	Arccosine
-* acosh::	Inverse hyperbolic cosine
-* asin::	Arcsine
-* asinh::	Inverse hyperbolic sine
-* atan::	Arctangent
-* atan2::	Arctangent of y/x
-* atanh::	Inverse hyperbolic tangent
-* jN::	        Bessel functions  (jN, yN)
-* cbrt::	Cube root
-* copysign::	Sign of Y, magnitude of X
-* cosh::	Hyperbolic cosine
-* erf::		Error function  (erf, erfc)
-* exp::		Exponential
-* expm1::	Exponential of x, - 1
-* fabs::	Absolute value (magnitude)
-* floor::	Floor and ceiling  (floor, ceil)
-* fmod::	Floating-point remainder (modulo)
-* frexp::	Split floating-point number
-* gamma::	Logarithmic gamma function
-* hypot::	Distance from origin
-* ilogb::	Get exponent
-* infinity::	Floating infinity
-* isnan::	Check type of number
-* ldexp::	Load exponent
-* log::		Natural logarithms
-* log10::	Base 10 logarithms
-* log1p::	Log of 1 + X
-* matherr::	Modifiable math error handler
-* modf::	Split fractional and integer parts
-* nan::		Floating Not a Number
-* nextafter::	Get next representable number
-* pow::		X to the power Y
-* remainder::	remainder of X divided by Y 
-* scalbn::	scalbn
-* sin::		Sine or cosine (sin, cos)
-* sinh::	Hyperbolic sine
-* sqrt::	Positive square root
-* tan::		Tangent
-* tanh::	Hyperbolic tangent
-@end menu
-
-@page
-@node version
-@section Version of library
-
-There are four different versions of the math library routines: IEEE,
-POSIX, X/Open, or SVID.  The version may be selected at runtime by
-setting the global variable @code{_LIB_VERSION}, defined in
-@file{math.h}.  It may be set to one of the following constants defined
-in @file{math.h}: @code{_IEEE_}, @code{_POSIX_}, @code{_XOPEN_}, or
-@code{_SVID_}.  The @code{_LIB_VERSION} variable is not specific to any
-thread, and changing it will affect all threads.
-
-The versions of the library differ only in how errors are handled.
-
-In IEEE mode, the @code{matherr} function is never called, no warning
-messages are printed, and @code{errno} is never set.
-
-In POSIX mode, @code{errno} is set correctly, but the @code{matherr}
-function is never called and no warning messages are printed.
-
-In X/Open mode, @code{errno} is set correctly, and @code{matherr} is
-called, but warning message are not printed.
-
-In SVID mode, functions which overflow return 3.40282346638528860e+38,
-the maximum single-precision floating-point value, rather than infinity.
-Also, @code{errno} is set correctly, @code{matherr} is called, and, if
-@code{matherr} returns 0, warning messages are printed for some errors.
-For example, by default @samp{log(-1.0)} writes this message on standard
-error output:
-
-@example
-log: DOMAIN error
-@end example
-
-The library is set to X/Open mode by default.
-
-@page
-@include mathfp/sacos.def
-
-@page
-@include mathfp/eacosh.def
-
-@page
-@include mathfp/sasine.def
-
-@page
-@include mathfp/sasinh.def
-
-@page
-@include mathfp/satan.def
-
-@page
-@include mathfp/satan2.def
-
-@page
-@include mathfp/eatanh.def
-
-@page
-@include mathfp/wjn.def
-
-@page
-@include mathfp/scosh.def
-
-@page
-@include mathfp/serf.def
-
-@page
-@include mathfp/sexp.def
-
-@page
-@include mathfp/sfabs.def
-
-@page
-@include mathfp/sfloor.def
-
-@page
-@include mathfp/sfmod.def
-
-@page
-@include mathfp/sfrexp.def
-
-@page
-@include mathfp/erlgamma.def
-
-@page
-@include mathfp/ehypot.def
-
-@page
-@include mathfp/sisnan.def
-
-@page
-@include mathfp/sldexp.def
-
-@page
-@include mathfp/slogarithm.def
-
-@page
-@include mathfp/slog10.def
-
-@page
-@include mathfp/spow.def
-
-@page
-@include mathfp/eremainder.def
-
-@page
-@include mathfp/ssqrt.def
-
-@page
-@include mathfp/ssine.def
-
-@page
-@include mathfp/ssineh.def
-
-@page
-@include mathfp/stan.def
-
-@page
-@include mathfp/stanh.def
diff --git a/newlib/libm/mathfp/s_acos.c b/newlib/libm/mathfp/s_acos.c
deleted file mode 100644
index 88d59372d..000000000
--- a/newlib/libm/mathfp/s_acos.c
+++ /dev/null
@@ -1,93 +0,0 @@
-
-/* @(#)z_acos.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-        <<acos>>, <<acosf>>---arc cosine
-
-INDEX
-        acos
-INDEX
-        acosf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double acos(double <[x]>);
-        float acosf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double acos(<[x]>)
-        double <[x]>;
-
-        float acosf(<[x]>)
-        float <[x]>;
-
-
-
-DESCRIPTION
-
-        <<acos>> computes the inverse cosine (arc cosine) of the input value.
-        Arguments to <<acos>> must be in the range @minus{}1 to 1.
-
-        <<acosf>> is identical to <<acos>>, except that it performs
-        its calculations on <<floats>>.
-
-RETURNS
-        @ifnottex
-        <<acos>> and <<acosf>> return values in radians, in the range of 0 to pi
-.
-        @end ifnottex
-        @tex
-        <<acos>> and <<acosf>> return values in radians, in the range of <<0>> t
-o $\pi$.
-        @end tex
-
-        If <[x]> is not between @minus{}1 and 1, the returned value is NaN
-        (not a number) the global variable <<errno>> is set to <<EDOM>>, and a
-        <<DOMAIN error>> message is sent as standard error output.
-
-        You can modify error handling for these functions using <<matherr>>.
-
-
-QUICKREF ANSI SVID POSIX RENTRANT
- acos    y,y,y,m
- acosf   n,n,n,m
-
-MATHREF
- acos, [-1,1], acos(arg),,,
- acos, NAN,    arg,DOMAIN,EDOM
-
-MATHREF
- acosf, [-1,1], acosf(arg),,,
- acosf, NAN,    argf,DOMAIN,EDOM
-
-*/
-
-/*****************************************************************
- * Arccosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arccosine of x
- *
- * Description:
- *   This routine returns the arccosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (acos, (double),
-        double x)
-{
-  return (asine (x, 1));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_asin.c b/newlib/libm/mathfp/s_asin.c
deleted file mode 100644
index 477bbf5cb..000000000
--- a/newlib/libm/mathfp/s_asin.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* @(#)z_asin.c 1.0 98/08/13 */
-/******************************************************************
- * Arcsine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arcsine of x
- *
- * Description:
- *   This routine returns the arcsine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (asin, (double),
-        double x)
-{
-  return (asine (x, 0));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_asine.c b/newlib/libm/mathfp/s_asine.c
deleted file mode 100644
index 89a2bed5e..000000000
--- a/newlib/libm/mathfp/s_asine.c
+++ /dev/null
@@ -1,186 +0,0 @@
-
-/* @(#)z_asine.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<asin>>, <<asinf>>, <<acos>>, <<acosf>>, <<asine>>, <<asinef>>---arc sine or cosine
-
-INDEX
-   asin
-INDEX
-   asinf
-INDEX
-   acos
-INDEX
-   acosf
-INDEX
-   asine
-INDEX
-   asinef
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double asine(double <[x]>);
-        float asinef(float <[x]>);
-        double asin(double <[x]>);
-        float asinf(float <[x]>);
-        double acos(double <[x]>);
-        float acosf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double asine(<[x]>);
-        double <[x]>;
-
-        float asinef(<[x]>);
-        float <[x]>;
-
-        double asin(<[x]>)
-        double <[x]>;
-
-        float asinf(<[x]>)
-        float <[x]>;
-
-        double acos(<[x]>)
-        double <[x]>;
-
-        float acosf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-
-<<asin>> computes the inverse sine or cosine of the argument <[x]>.
-Arguments to <<asin>> and <<acos>> must be in the range @minus{}1 to 1.
-
-<<asinf>> and <<acosf>> are identical to <<asin>> and <<acos>>, other 
-than taking and returning floats.
-
-RETURNS
-@ifnottex
-<<asin>> and <<acos>> return values in radians, in the range of -pi/2 to pi/2.
-@end ifnottex
-@tex
-<<asin>> and <<acos>> return values in radians, in the range of $-\pi/2$ to $\pi/2$.
-@end tex
-
-If <[x]> is not in the range @minus{}1 to 1, <<asin>> and <<asinf>>
-return NaN (not a number), set the global variable <<errno>> to
-<<EDOM>>, and issue a <<DOMAIN error>> message.
-
-*/
-
-/******************************************************************
- * Arcsine
- *
- * Input:
- *   x - floating point value
- *   acosine - indicates acos calculation
- *
- * Output:
- *   Arcsine of x.
- *
- * Description:
- *   This routine calculates arcsine / arccosine.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double p[] = { -0.27368494524164255994e+2,
-                             0.57208227877891731407e+2,
-                            -0.39688862997404877339e+2,
-                             0.10152522233806463645e+2,
-                            -0.69674573447350646411 };
-static const double q[] = { -0.16421096714498560795e+3,
-                             0.41714430248260412556e+3,
-                            -0.38186303361750149284e+3,
-                             0.15095270841030604719e+3,
-                            -0.23823859153670238830e+2 };
-static const double a[] = { 0.0, 0.78539816339744830962 };
-static const double b[] = { 1.57079632679489661923, 0.78539816339744830962 };
-
-double
-_DEFUN (asine, (double, int),
-        double x _AND
-        int acosine)
-{
-  int flag, i;
-  int branch = 0;
-  double g, res, R, P, Q, y;
-
-  /* Check for special values. */
-  i = numtest (x);
-  if (i == NAN || i == INF)
-    {
-      errno = EDOM;
-      if (i == NAN)
-        return (x);
-      else
-        return (z_infinity.d);
-    }
-
-  y = fabs (x);
-  flag = acosine;
-
-  if (y > 0.5)
-    {
-      i = 1 - flag;
-
-      /* Check for range error. */
-      if (y > 1.0)
-        {
-          errno = ERANGE;
-          return (z_notanum.d);
-        }
-
-      g = (1 - y) / 2.0;
-      y = -2 * sqrt (g);
-      branch = 1;
-    }
-  else
-    {
-      i = flag;
-      if (y < z_rooteps)
-        res = y;
-      else
-        g = y * y;
-    }
-
-  if (y >= z_rooteps || branch == 1)
-    {
-      /* Calculate the Taylor series. */
-      P = ((((p[4] * g + p[3]) * g + p[2]) * g + p[1]) * g + p[0]) * g;
-      Q = ((((g + q[4]) * g + q[3]) * g + q[2]) * g + q[1]) * g + q[0];
-      R = P / Q;
-
-      res = y + y * R;
-    }
-
-  /* Calculate asine or acose. */
-  if (flag == 0)
-    {
-      res = (a[i] + res) + a[i];
-      if (x < 0.0)
-        res = -res;
-    }
-  else
-    {
-      if (x < 0.0)
-        res = (b[i] + res) + b[i];
-      else
-        res = (a[i] - res) + a[i];
-    }
-
-  return (res);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_asinh.c b/newlib/libm/mathfp/s_asinh.c
deleted file mode 100644
index d70cc61db..000000000
--- a/newlib/libm/mathfp/s_asinh.c
+++ /dev/null
@@ -1,107 +0,0 @@
-
-/* @(#)s_asinh.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-	<<asinh>>, <<asinhf>>---inverse hyperbolic sine 
-
-INDEX
-	asinh
-INDEX
-	asinhf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double asinh(double <[x]>);
-	float asinhf(float <[x]>);
-
-TRAD_SYNOPSIS
-	#include <math.h>
-	double asinh(<[x]>)
-	double <[x]>;
-
-	float asinhf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-<<asinh>> calculates the inverse hyperbolic sine of <[x]>.
-<<asinh>> is defined as 
-@ifnottex
-. sgn(<[x]>) * log(abs(<[x]>) + sqrt(1+<[x]>*<[x]>))
-@end ifnottex
-@tex
-$$sign(x) \times ln\Bigl(|x| + \sqrt{1+x^2}\Bigr)$$
-@end tex
-
-<<asinhf>> is identical, other than taking and returning floats.
-
-RETURNS
-<<asinh>> and <<asinhf>> return the calculated value.
-
-PORTABILITY
-Neither <<asinh>> nor <<asinhf>> are ANSI C.
-
-*/
-
-/* asinh(x)
- * Method :
- *	Based on 
- *		asinh(x) = sign(x) * log [ |x| + sqrt(x*x+1) ]
- *	we have
- *	asinh(x) := x  if  1+x*x=1,
- *		 := sign(x)*(log(x)+ln2)) for large |x|, else
- *		 := sign(x)*log(2|x|+1/(|x|+sqrt(x*x+1))) if|x|>2, else
- *		 := sign(x)*log1p(|x| + x^2/(1 + sqrt(1+x^2)))  
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double 
-#else
-static double 
-#endif
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-ln2 =  6.93147180559945286227e-01, /* 0x3FE62E42, 0xFEFA39EF */
-huge=  1.00000000000000000000e+300; 
-
-#ifdef __STDC__
-	double asinh(double x)
-#else
-	double asinh(x)
-	double x;
-#endif
-{	
-	double t,w;
-	__int32_t hx,ix;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) return x+x;	/* x is inf or NaN */
-	if(ix< 0x3e300000) {	/* |x|<2**-28 */
-	    if(huge+x>one) return x;	/* return x inexact except 0 */
-	} 
-	if(ix>0x41b00000) {	/* |x| > 2**28 */
-	    w = log(fabs(x))+ln2;
-	} else if (ix>0x40000000) {	/* 2**28 > |x| > 2.0 */
-	    t = fabs(x);
-	    w = log(2.0*t+one/(sqrt(x*x+one)+t));
-	} else {		/* 2.0 > |x| > 2**-28 */
-	    t = x*x;
-	    w =log1p(fabs(x)+t/(one+sqrt(one+t)));
-	}
-	if(hx>0) return w; else return -w;
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_atan.c b/newlib/libm/mathfp/s_atan.c
deleted file mode 100644
index a5a818979..000000000
--- a/newlib/libm/mathfp/s_atan.c
+++ /dev/null
@@ -1,83 +0,0 @@
-
-/* @(#)z_atan.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-        <<atan>>, <<atanf>>---arc tangent
-
-INDEX
-   atan
-INDEX
-   atanf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atan(double <[x]>);
-        float atanf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atan(<[x]>);
-        double <[x]>;
-
-        float atanf(<[x]>);
-        float <[x]>;
-
-DESCRIPTION
-
-<<atan>> computes the inverse tangent (arc tangent) of the input value.
-
-<<atanf>> is identical to <<atan>>, save that it operates on <<floats>>.
-
-RETURNS
-@ifnottex
-<<atan>> returns a value in radians, in the range of -pi/2 to pi/2.
-@end ifnottex
-@tex
-<<atan>> returns a value in radians, in the range of $-\pi/2$ to $\pi/2$.
-@end tex
-
-PORTABILITY
-<<atan>> is ANSI C.  <<atanf>> is an extension.
-
-*/
-
-/******************************************************************
- * Arctangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arctan of x
- *
- * Description:
- *   This routine returns the arctan of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (atan, (double),
-        double x)
-{
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        /* this should check to see if neg NaN or pos NaN... */
-        return (__PI_OVER_TWO);
-      case 0:
-        return (0.0);
-      default:
-        return (atangent (x, 0, 0, 0));
-    }
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_atan2.c b/newlib/libm/mathfp/s_atan2.c
deleted file mode 100644
index 60034b3ad..000000000
--- a/newlib/libm/mathfp/s_atan2.c
+++ /dev/null
@@ -1,89 +0,0 @@
-
-/* @(#)z_atan2.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-        <<atan2>>, <<atan2f>>---arc tangent of y/x
-
-INDEX
-   atan2
-INDEX
-   atan2f
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atan2(double <[y]>,double <[x]>);
-        float atan2f(float <[y]>,float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atan2(<[y]>,<[x]>);
-        double <[y]>;
-        double <[x]>;
-
-        float atan2f(<[y]>,<[x]>);
-        float <[y]>;
-        float <[x]>;
-
-DESCRIPTION
-
-<<atan2>> computes the inverse tangent (arc tangent) of <[y]>/<[x]>.
-<<atan2>> produces the correct result even for angles near
-@ifnottex
-pi/2 or -pi/2
-@end ifnottex
-@tex
-$\pi/2$ or $-\pi/2$
-@end tex
-(that is, when <[x]> is near 0).
-
-<<atan2f>> is identical to <<atan2>>, save that it takes and returns
-<<float>>.
-
-RETURNS
-<<atan2>> and <<atan2f>> return a value in radians, in the range of
-@ifnottex
--pi to pi.
-@end ifnottex
-@tex
-$-\pi$ to $\pi$.
-@end tex
-
-If both <[x]> and <[y]> are 0.0, <<atan2>> causes a <<DOMAIN>> error.
-
-You can modify error handling for these functions using <<matherr>>.
-
-PORTABILITY
-<<atan2>> is ANSI C.  <<atan2f>> is an extension.
-
-
-*/
-
-/******************************************************************
- * Arctangent2
- *
- * Input:
- *   v, u - floating point values
- *
- * Output:
- *   arctan2 of v / u 
- *
- * Description:
- *   This routine returns the arctan2 of v / u.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (atan2, (double, double),
-        double v _AND
-        double u)
-{
-  return (atangent (0.0, v, u, 1));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_atangent.c b/newlib/libm/mathfp/s_atangent.c
deleted file mode 100644
index 981e1c822..000000000
--- a/newlib/libm/mathfp/s_atangent.c
+++ /dev/null
@@ -1,213 +0,0 @@
-
-/* @(#)z_atangent.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<atan>>, <<atanf>>, <<atan2>>, <<atan2f>>, <<atangent>>, <<atangentf>>---arc tangent
-
-INDEX
-   atan2
-INDEX
-   atan2f
-INDEX
-   atan
-INDEX
-   atanf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double atan(double <[x]>);
-        float atan(float <[x]>);
-        double atan2(double <[y]>,double <[x]>);
-        float atan2f(float <[y]>,float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double atan2(<[y]>,<[x]>);
-        double <[y]>;
-        double <[x]>;
-
-        float atan2f(<[y]>,<[x]>);
-        float <[y]>;
-        float <[x]>;
-
-        #include <math.h>
-        double atan(<[x]>);
-        double <[x]>;
-
-        float atanf(<[x]>);
-        float <[x]>;
-
-DESCRIPTION
-
-<<atan2>> computes the inverse tangent (arc tangent) of y / x.
-
-<<atan2f>> is identical to <<atan2>>, save that it operates on <<floats>>.
-
-<<atan>> computes the inverse tangent (arc tangent) of the input value.
-
-<<atanf>> is identical to <<atan>>, save that it operates on <<floats>>.
-
-RETURNS
-@ifnottex
-<<atan>> returns a value in radians, in the range of -pi/2 to pi/2.
-<<atan2>> returns a value in radians, in the range of -pi/2 to pi/2.
-@end ifnottex
-@tex
-<<atan>> returns a value in radians, in the range of $-\pi/2$ to $\pi/2$.
-<<atan2>> returns a value in radians, in the range of $-\pi/2$ to $\pi/2$.
-@end tex
-
-PORTABILITY
-<<atan>> is ANSI C.  <<atanf>> is an extension.
-<<atan2>> is ANSI C.  <<atan2f>> is an extension.
-
-*/
-
-/******************************************************************
- * Arctangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arctangent of x
- *
- * Description:
- *   This routine calculates arctangents.
- *
- *****************************************************************/
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double ROOT3 = 1.73205080756887729353;
-static const double a[] = { 0.0, 0.52359877559829887308, 1.57079632679489661923,
-                     1.04719755119659774615 };
-static const double q[] = { 0.41066306682575781263e+2,
-                     0.86157349597130242515e+2,
-                     0.59578436142597344465e+2,
-                     0.15024001160028576121e+2 };
-static const double p[] = { -0.13688768894191926929e+2,
-                     -0.20505855195861651981e+2,
-                     -0.84946240351320683534e+1,
-                     -0.83758299368150059274 };
-
-double
-_DEFUN (atangent, (double, double, double, int),
-        double x _AND
-        double v _AND
-        double u _AND
-        int arctan2)
-{
-  double f, g, R, P, Q, A, res;
-  int N;
-  int branch = 0;
-  int expv, expu;
-
-  /* Preparation for calculating arctan2. */
-  if (arctan2)
-    {
-      if (u == 0.0)
-        if (v == 0.0)
-          {
-            errno = ERANGE;
-            return (z_notanum.d);
-          }
-        else
-          {
-            branch = 1;
-            res = __PI_OVER_TWO;
-          }
-
-      if (!branch)
-        {
-          int e;
-          /* Get the exponent values of the inputs. */
-          g = frexp (v, &expv);
-          g = frexp (u, &expu);
-
-          /* See if a divide will overflow. */
-          e = expv - expu;
-          if (e > DBL_MAX_EXP)
-            {
-               branch = 1;
-               res = __PI_OVER_TWO;
-            }
-
-          /* Also check for underflow. */
-          else if (e < DBL_MIN_EXP)
-            {
-               branch = 2;
-               res = 0.0;
-            }
-         }
-    }
-
-  if (!branch)
-    {
-      if (arctan2)
-        f = fabs (v / u);
-      else
-        f = fabs (x);
-
-      if (f > 1.0)
-        {
-          f = 1.0 / f;
-          N = 2;
-        }
-      else
-        N = 0;
-
-      if (f > (2.0 - ROOT3))
-        {
-          A = ROOT3 - 1.0;
-          f = (((A * f - 0.5) - 0.5) + f) / (ROOT3 + f);
-          N++;
-        }
-
-      /* Check for values that are too small. */
-      if (-z_rooteps < f && f < z_rooteps)
-        res = f;
-
-      /* Calculate the Taylor series. */
-      else
-        {
-          g = f * f;
-          P = (((p[3] * g + p[2]) * g + p[1]) * g + p[0]) * g;
-          Q = (((g + q[3]) * g + q[2]) * g + q[1]) * g + q[0];
-          R = P / Q;
-
-          res = f + f * R;
-        }
-
-      if (N > 1)
-        res = -res;
-
-      res += a[N];
-    }
-
-  if (arctan2)
-    {
-      if (u < 0.0 || branch == 2)
-        res = __PI - res;
-      if (v < 0.0 || branch == 1)
-        res = -res;
-    }
-  else if (x < 0.0)
-    {
-      res = -res;
-    }
-
-  return (res);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_ceil.c b/newlib/libm/mathfp/s_ceil.c
deleted file mode 100644
index c6ecbe323..000000000
--- a/newlib/libm/mathfp/s_ceil.c
+++ /dev/null
@@ -1,38 +0,0 @@
-
-/* @(#)z_ceil.c 1.0 98/08/13 */
-/*****************************************************************
- * ceil
- *
- * Input:
- *   x  - floating point value
- *
- * Output:
- *   Smallest integer greater than x.
- *
- * Description:
- *   This routine returns the smallest integer greater than x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (ceil, (double),
-        double x)
-{
-  double f, y;
-
-  y = modf (x, &f);
-
-  if (y == 0.0)
-    return (x);
-  else if (x > -1.0 && x < 1.0)
-    return (x > 0 ? 1.0 : 0.0);
-  else
-    return (x > 0 ? f + 1.0 : f);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_cos.c b/newlib/libm/mathfp/s_cos.c
deleted file mode 100644
index 6f63a404e..000000000
--- a/newlib/libm/mathfp/s_cos.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* @(#)z_cos.c 1.0 98/08/13 */
-/******************************************************************
- * Cosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   cosine of x
- *
- * Description:
- *   This routine returns the cosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (cos, (double),
-        double x)
-{
-  return (sine (x, 1));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_cosh.c b/newlib/libm/mathfp/s_cosh.c
deleted file mode 100644
index 24b542092..000000000
--- a/newlib/libm/mathfp/s_cosh.c
+++ /dev/null
@@ -1,80 +0,0 @@
-
-/* @(#)z_cosh.c 1.0 98/08/13 */
-
-/*
-
-FUNCTION
-        <<cosh>>, <<coshf>>---hyperbolic cosine
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double cosh(double <[x]>);
-        float coshf(float <[x]>)
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double cosh(<[x]>)
-        double <[x]>;
-
-        float coshf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-
-        <<cosh>> computes the hyperbolic cosine of the argument <[x]>.
-        <<cosh(<[x]>)>> is defined as
-        @ifnottex
-        . (exp(x) + exp(-x))/2
-        @end ifnottex
-        @tex
-        $${(e^x + e^{-x})} \over 2$$
-        @end tex
-
-        Angles are specified in radians.
-
-        <<coshf>> is identical, save that it takes and returns <<float>>.
-
-RETURNS
-        The computed value is returned.  When the correct value would create
-        an overflow,  <<cosh>> returns the value <<HUGE_VAL>> with the
-        appropriate sign, and the global value <<errno>> is set to <<ERANGE>>.
-
-        You can modify error handling for these functions using the
-        function <<matherr>>.
-
-PORTABILITY
-        <<cosh>> is ANSI.
-        <<coshf>> is an extension.
-
-QUICKREF
-        cosh ansi pure
-        coshf - pure
-*/
-
-/******************************************************************
- * Hyperbolic Cosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic cosine of x
- *
- * Description:
- *   This routine returns the hyperbolic cosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (cosh, (double),
-        double x)
-{
-  return (sineh (x, 1));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_erf.c b/newlib/libm/mathfp/s_erf.c
deleted file mode 100644
index 2d8faa3d8..000000000
--- a/newlib/libm/mathfp/s_erf.c
+++ /dev/null
@@ -1,373 +0,0 @@
-
-/* @(#)s_erf.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-        <<erf>>, <<erff>>, <<erfc>>, <<erfcf>>---error function 
-INDEX
-	erf
-INDEX
-	erff
-INDEX
-	erfc
-INDEX
-	erfcf
-
-ANSI_SYNOPSIS
-	#include <math.h>
-	double erf(double <[x]>);
-	float erff(float <[x]>);
-	double erfc(double <[x]>);
-	float erfcf(float <[x]>);
-TRAD_SYNOPSIS
-	#include <math.h>
-
-	double erf(<[x]>)
-	double <[x]>;
-
-	float erff(<[x]>)
-	float <[x]>;
-
-	double erfc(<[x]>)
-	double <[x]>;
-
-	float erfcf(<[x]>)
-	float <[x]>;
-
-DESCRIPTION
-	<<erf>> calculates an approximation to the ``error function'',
-	which estimates the probability that an observation will fall within
-	<[x]> standard deviations of the mean (assuming a normal
-	distribution).
-	@tex
-	The error function is defined as
-	$${2\over\sqrt\pi}\times\int_0^x e^{-t^2}dt$$
-	 @end tex
-
-	<<erfc>> calculates the complementary probability; that is,
-	<<erfc(<[x]>)>> is <<1 - erf(<[x]>)>>.  <<erfc>> is computed directly,
-	so that you can use it to avoid the loss of precision that would
-	result from subtracting large probabilities (on large <[x]>) from 1.
-
-	<<erff>> and <<erfcf>> differ from <<erf>> and <<erfc>> only in the
-	argument and result types.
-
-RETURNS
-	For positive arguments, <<erf>> and all its variants return a
-	probability---a number between 0 and 1.
-
-PORTABILITY
-	None of the variants of <<erf>> are ANSI C.
-*/
-
-/* double erf(double x)
- * double erfc(double x)
- *			     x
- *		      2      |\
- *     erf(x)  =  ---------  | exp(-t*t)dt
- *	 	   sqrt(pi) \| 
- *			     0
- *
- *     erfc(x) =  1-erf(x)
- *  Note that 
- *		erf(-x) = -erf(x)
- *		erfc(-x) = 2 - erfc(x)
- *
- * Method:
- *	1. For |x| in [0, 0.84375]
- *	    erf(x)  = x + x*R(x^2)
- *          erfc(x) = 1 - erf(x)           if x in [-.84375,0.25]
- *                  = 0.5 + ((0.5-x)-x*R)  if x in [0.25,0.84375]
- *	   where R = P/Q where P is an odd poly of degree 8 and
- *	   Q is an odd poly of degree 10.
- *						 -57.90
- *			| R - (erf(x)-x)/x | <= 2
- *	
- *
- *	   Remark. The formula is derived by noting
- *          erf(x) = (2/sqrt(pi))*(x - x^3/3 + x^5/10 - x^7/42 + ....)
- *	   and that
- *          2/sqrt(pi) = 1.128379167095512573896158903121545171688
- *	   is close to one. The interval is chosen because the fix
- *	   point of erf(x) is near 0.6174 (i.e., erf(x)=x when x is
- *	   near 0.6174), and by some experiment, 0.84375 is chosen to
- * 	   guarantee the error is less than one ulp for erf.
- *
- *      2. For |x| in [0.84375,1.25], let s = |x| - 1, and
- *         c = 0.84506291151 rounded to single (24 bits)
- *         	erf(x)  = sign(x) * (c  + P1(s)/Q1(s))
- *         	erfc(x) = (1-c)  - P1(s)/Q1(s) if x > 0
- *			  1+(c+P1(s)/Q1(s))    if x < 0
- *         	|P1/Q1 - (erf(|x|)-c)| <= 2**-59.06
- *	   Remark: here we use the taylor series expansion at x=1.
- *		erf(1+s) = erf(1) + s*Poly(s)
- *			 = 0.845.. + P1(s)/Q1(s)
- *	   That is, we use rational approximation to approximate
- *			erf(1+s) - (c = (single)0.84506291151)
- *	   Note that |P1/Q1|< 0.078 for x in [0.84375,1.25]
- *	   where 
- *		P1(s) = degree 6 poly in s
- *		Q1(s) = degree 6 poly in s
- *
- *      3. For x in [1.25,1/0.35(~2.857143)], 
- *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R1/S1)
- *         	erf(x)  = 1 - erfc(x)
- *	   where 
- *		R1(z) = degree 7 poly in z, (z=1/x^2)
- *		S1(z) = degree 8 poly in z
- *
- *      4. For x in [1/0.35,28]
- *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R2/S2) if x > 0
- *			= 2.0 - (1/x)*exp(-x*x-0.5625+R2/S2) if -6<x<0
- *			= 2.0 - tiny		(if x <= -6)
- *         	erf(x)  = sign(x)*(1.0 - erfc(x)) if x < 6, else
- *         	erf(x)  = sign(x)*(1.0 - tiny)
- *	   where
- *		R2(z) = degree 6 poly in z, (z=1/x^2)
- *		S2(z) = degree 7 poly in z
- *
- *      Note1:
- *	   To compute exp(-x*x-0.5625+R/S), let s be a single
- *	   precision number and s := x; then
- *		-x*x = -s*s + (s-x)*(s+x)
- *	        exp(-x*x-0.5626+R/S) = 
- *			exp(-s*s-0.5625)*exp((s-x)*(s+x)+R/S);
- *      Note2:
- *	   Here 4 and 5 make use of the asymptotic series
- *			  exp(-x*x)
- *		erfc(x) ~ ---------- * ( 1 + Poly(1/x^2) )
- *			  x*sqrt(pi)
- *	   We use rational approximation to approximate
- *      	g(s)=f(1/x^2) = log(erfc(x)*x) - x*x + 0.5625
- *	   Here is the error bound for R1/S1 and R2/S2
- *      	|R1/S1 - f(x)|  < 2**(-62.57)
- *      	|R2/S2 - f(x)|  < 2**(-61.52)
- *
- *      5. For inf > x >= 28
- *         	erf(x)  = sign(x) *(1 - tiny)  (raise inexact)
- *         	erfc(x) = tiny*tiny (raise underflow) if x > 0
- *			= 2 - tiny if x<0
- *
- *      7. Special case:
- *         	erf(0)  = 0, erf(inf)  = 1, erf(-inf) = -1,
- *         	erfc(0) = 1, erfc(inf) = 0, erfc(-inf) = 2, 
- *	   	erfc/erf(NaN) is NaN
- */
-
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double
-#else
-static double
-#endif
-tiny	    = 1e-300,
-half=  5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
-one =  1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
-two =  2.00000000000000000000e+00, /* 0x40000000, 0x00000000 */
-	/* c = (float)0.84506291151 */
-erx =  8.45062911510467529297e-01, /* 0x3FEB0AC1, 0x60000000 */
-/*
- * Coefficients for approximation to  erf on [0,0.84375]
- */
-efx =  1.28379167095512586316e-01, /* 0x3FC06EBA, 0x8214DB69 */
-efx8=  1.02703333676410069053e+00, /* 0x3FF06EBA, 0x8214DB69 */
-pp0  =  1.28379167095512558561e-01, /* 0x3FC06EBA, 0x8214DB68 */
-pp1  = -3.25042107247001499370e-01, /* 0xBFD4CD7D, 0x691CB913 */
-pp2  = -2.84817495755985104766e-02, /* 0xBF9D2A51, 0xDBD7194F */
-pp3  = -5.77027029648944159157e-03, /* 0xBF77A291, 0x236668E4 */
-pp4  = -2.37630166566501626084e-05, /* 0xBEF8EAD6, 0x120016AC */
-qq1  =  3.97917223959155352819e-01, /* 0x3FD97779, 0xCDDADC09 */
-qq2  =  6.50222499887672944485e-02, /* 0x3FB0A54C, 0x5536CEBA */
-qq3  =  5.08130628187576562776e-03, /* 0x3F74D022, 0xC4D36B0F */
-qq4  =  1.32494738004321644526e-04, /* 0x3F215DC9, 0x221C1A10 */
-qq5  = -3.96022827877536812320e-06, /* 0xBED09C43, 0x42A26120 */
-/*
- * Coefficients for approximation to  erf  in [0.84375,1.25] 
- */
-pa0  = -2.36211856075265944077e-03, /* 0xBF6359B8, 0xBEF77538 */
-pa1  =  4.14856118683748331666e-01, /* 0x3FDA8D00, 0xAD92B34D */
-pa2  = -3.72207876035701323847e-01, /* 0xBFD7D240, 0xFBB8C3F1 */
-pa3  =  3.18346619901161753674e-01, /* 0x3FD45FCA, 0x805120E4 */
-pa4  = -1.10894694282396677476e-01, /* 0xBFBC6398, 0x3D3E28EC */
-pa5  =  3.54783043256182359371e-02, /* 0x3FA22A36, 0x599795EB */
-pa6  = -2.16637559486879084300e-03, /* 0xBF61BF38, 0x0A96073F */
-qa1  =  1.06420880400844228286e-01, /* 0x3FBB3E66, 0x18EEE323 */
-qa2  =  5.40397917702171048937e-01, /* 0x3FE14AF0, 0x92EB6F33 */
-qa3  =  7.18286544141962662868e-02, /* 0x3FB2635C, 0xD99FE9A7 */
-qa4  =  1.26171219808761642112e-01, /* 0x3FC02660, 0xE763351F */
-qa5  =  1.36370839120290507362e-02, /* 0x3F8BEDC2, 0x6B51DD1C */
-qa6  =  1.19844998467991074170e-02, /* 0x3F888B54, 0x5735151D */
-/*
- * Coefficients for approximation to  erfc in [1.25,1/0.35]
- */
-ra0  = -9.86494403484714822705e-03, /* 0xBF843412, 0x600D6435 */
-ra1  = -6.93858572707181764372e-01, /* 0xBFE63416, 0xE4BA7360 */
-ra2  = -1.05586262253232909814e+01, /* 0xC0251E04, 0x41B0E726 */
-ra3  = -6.23753324503260060396e+01, /* 0xC04F300A, 0xE4CBA38D */
-ra4  = -1.62396669462573470355e+02, /* 0xC0644CB1, 0x84282266 */
-ra5  = -1.84605092906711035994e+02, /* 0xC067135C, 0xEBCCABB2 */
-ra6  = -8.12874355063065934246e+01, /* 0xC0545265, 0x57E4D2F2 */
-ra7  = -9.81432934416914548592e+00, /* 0xC023A0EF, 0xC69AC25C */
-sa1  =  1.96512716674392571292e+01, /* 0x4033A6B9, 0xBD707687 */
-sa2  =  1.37657754143519042600e+02, /* 0x4061350C, 0x526AE721 */
-sa3  =  4.34565877475229228821e+02, /* 0x407B290D, 0xD58A1A71 */
-sa4  =  6.45387271733267880336e+02, /* 0x40842B19, 0x21EC2868 */
-sa5  =  4.29008140027567833386e+02, /* 0x407AD021, 0x57700314 */
-sa6  =  1.08635005541779435134e+02, /* 0x405B28A3, 0xEE48AE2C */
-sa7  =  6.57024977031928170135e+00, /* 0x401A47EF, 0x8E484A93 */
-sa8  = -6.04244152148580987438e-02, /* 0xBFAEEFF2, 0xEE749A62 */
-/*
- * Coefficients for approximation to  erfc in [1/.35,28]
- */
-rb0  = -9.86494292470009928597e-03, /* 0xBF843412, 0x39E86F4A */
-rb1  = -7.99283237680523006574e-01, /* 0xBFE993BA, 0x70C285DE */
-rb2  = -1.77579549177547519889e+01, /* 0xC031C209, 0x555F995A */
-rb3  = -1.60636384855821916062e+02, /* 0xC064145D, 0x43C5ED98 */
-rb4  = -6.37566443368389627722e+02, /* 0xC083EC88, 0x1375F228 */
-rb5  = -1.02509513161107724954e+03, /* 0xC0900461, 0x6A2E5992 */
-rb6  = -4.83519191608651397019e+02, /* 0xC07E384E, 0x9BDC383F */
-sb1  =  3.03380607434824582924e+01, /* 0x403E568B, 0x261D5190 */
-sb2  =  3.25792512996573918826e+02, /* 0x40745CAE, 0x221B9F0A */
-sb3  =  1.53672958608443695994e+03, /* 0x409802EB, 0x189D5118 */
-sb4  =  3.19985821950859553908e+03, /* 0x40A8FFB7, 0x688C246A */
-sb5  =  2.55305040643316442583e+03, /* 0x40A3F219, 0xCEDF3BE6 */
-sb6  =  4.74528541206955367215e+02, /* 0x407DA874, 0xE79FE763 */
-sb7  = -2.24409524465858183362e+01; /* 0xC03670E2, 0x42712D62 */
-
-#ifdef __STDC__
-	double erf(double x) 
-#else
-	double erf(x) 
-	double x;
-#endif
-{
-	__int32_t hx,ix,i;
-	double R,S,P,Q,s,y,z,r;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) {		/* erf(nan)=nan */
-	    i = ((__uint32_t)hx>>31)<<1;
-	    return (double)(1-i)+one/x;	/* erf(+-inf)=+-1 */
-	}
-
-	if(ix < 0x3feb0000) {		/* |x|<0.84375 */
-	    if(ix < 0x3e300000) { 	/* |x|<2**-28 */
-	        if (ix < 0x00800000) 
-		    return 0.125*(8.0*x+efx8*x);  /*avoid underflow */
-		return x + efx*x;
-	    }
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    return x + x*y;
-	}
-	if(ix < 0x3ff40000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabs(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) return erx + P/Q; else return -erx - P/Q;
-	}
-	if (ix >= 0x40180000) {		/* inf>|x|>=6 */
-	    if(hx>=0) return one-tiny; else return tiny-one;
-	}
-	x = fabs(x);
- 	s = one/(x*x);
-	if(ix< 0x4006DB6E) {	/* |x| < 1/0.35 */
-	    R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	    S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	} else {	/* |x| >= 1/0.35 */
-	    R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	    S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	}
-	z  = x;  
-	SET_LOW_WORD(z,0);
-	r  =  exp(-z*z-0.5625)*exp((z-x)*(z+x)+R/S);
-	if(hx>=0) return one-r/x; else return  r/x-one;
-}
-
-#ifdef __STDC__
-	double erfc(double x) 
-#else
-	double erfc(x) 
-	double x;
-#endif
-{
-	__int32_t hx,ix;
-	double R,S,P,Q,s,y,z,r;
-	GET_HIGH_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7ff00000) {			/* erfc(nan)=nan */
-						/* erfc(+-inf)=0,2 */
-	    return (double)(((__uint32_t)hx>>31)<<1)+one/x;
-	}
-
-	if(ix < 0x3feb0000) {		/* |x|<0.84375 */
-	    if(ix < 0x3c700000)  	/* |x|<2**-56 */
-		return one-x;
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    if(hx < 0x3fd00000) {  	/* x<1/4 */
-		return one-(x+x*y);
-	    } else {
-		r = x*y;
-		r += (x-half);
-	        return half - r ;
-	    }
-	}
-	if(ix < 0x3ff40000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabs(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) {
-	        z  = one-erx; return z - P/Q; 
-	    } else {
-		z = erx+P/Q; return one+z;
-	    }
-	}
-	if (ix < 0x403c0000) {		/* |x|<28 */
-	    x = fabs(x);
- 	    s = one/(x*x);
-	    if(ix< 0x4006DB6D) {	/* |x| < 1/.35 ~ 2.857143*/
-	        R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	        S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	    } else {			/* |x| >= 1/.35 ~ 2.857143 */
-		if(hx<0&&ix>=0x40180000) return two-tiny;/* x < -6 */
-	        R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	        S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	    }
-	    z  = x;
-	    SET_LOW_WORD(z,0);
-	    r  =  exp(-z*z-0.5625)*
-			exp((z-x)*(z+x)+R/S);
-	    if(hx>0) return r/x; else return two-r/x;
-	} else {
-	    if(hx>0) return tiny*tiny; else return two-tiny;
-	}
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_exp.c b/newlib/libm/mathfp/s_exp.c
deleted file mode 100644
index e70699b06..000000000
--- a/newlib/libm/mathfp/s_exp.c
+++ /dev/null
@@ -1,133 +0,0 @@
-
-/* @(#)z_exp.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<exp>>, <<expf>>---exponential
-INDEX
-        exp
-INDEX
-        expf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double exp(double <[x]>);
-        float expf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double exp(<[x]>);
-        double <[x]>;
-
-        float expf(<[x]>);
-        float <[x]>;
-
-DESCRIPTION
-        <<exp>> and <<expf>> calculate the exponential of <[x]>, that is,
-        @ifnottex
-        e raised to the power <[x]> (where e
-        @end ifnottex
-        @tex
-        $e^x$ (where $e$
-        @end tex
-        is the base of the natural system of logarithms, approximately 2.71828).
-
-RETURNS
-        On success, <<exp>> and <<expf>> return the calculated value.
-        If the result underflows, the returned value is <<0>>.  If the
-        result overflows, the returned value is <<HUGE_VAL>>.  In
-        either case, <<errno>> is set to <<ERANGE>>.
-
-PORTABILITY
-        <<exp>> is ANSI C.  <<expf>> is an extension.
-
-*/
-
-/*****************************************************************
- * Exponential Function
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   e raised to x.
- *
- * Description:
- *   This routine returns e raised to the xth power.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double INV_LN2 = 1.4426950408889634074;
-static const double LN2 = 0.6931471805599453094172321;
-static const double p[] = { 0.25, 0.75753180159422776666e-2,
-                     0.31555192765684646356e-4 };
-static const double q[] = { 0.5, 0.56817302698551221787e-1,
-                     0.63121894374398504557e-3,
-                     0.75104028399870046114e-6 };
-
-double
-_DEFUN (exp, (double),
-        double x)
-{
-  int N;
-  double g, z, R, P, Q;
-
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        if (ispos (x))
-          return (z_infinity.d);
-        else
-          return (0.0);
-      case 0:
-        return (1.0);
-    }
-
-  /* Check for out of bounds. */
-  if (x > BIGX || x < SMALLX)
-    {
-      errno = ERANGE;
-      return (x);
-    }
-
-  /* Check for a value too small to calculate. */
-  if (-z_rooteps < x && x < z_rooteps)
-    {
-      return (1.0);
-    }
-
-  /* Calculate the exponent. */
-  if (x < 0.0)
-    N = (int) (x * INV_LN2 - 0.5);
-  else
-    N = (int) (x * INV_LN2 + 0.5);
-
-  /* Construct the mantissa. */
-  g = x - N * LN2;
-  z = g * g;
-  P = g * ((p[2] * z + p[1]) * z + p[0]);
-  Q = ((q[3] * z + q[2]) * z + q[1]) * z + q[0];
-  R = 0.5 + P / (Q - P);
-
-  /* Return the floating point value. */
-  N++;
-  return (ldexp (R, N));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_exp2.c b/newlib/libm/mathfp/s_exp2.c
deleted file mode 100644
index 3bcf7ca2c..000000000
--- a/newlib/libm/mathfp/s_exp2.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (exp2, (double),
-        double x)
-{
-  return pow(2.0, x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_fabs.c b/newlib/libm/mathfp/s_fabs.c
deleted file mode 100644
index 9e1d75eb3..000000000
--- a/newlib/libm/mathfp/s_fabs.c
+++ /dev/null
@@ -1,80 +0,0 @@
-
-/* @(#)z_fabs.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-       <<fabs>>, <<fabsf>>---absolute value (magnitude)
-INDEX
-        fabs
-INDEX
-        fabsf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-       double fabs(double <[x]>);
-       float fabsf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-       double fabs(<[x]>)
-       double <[x]>;
-
-       float fabsf(<[x]>)
-       float <[x]>;
-
-DESCRIPTION
-<<fabs>> and <<fabsf>> calculate
-@tex
-$|x|$,
-@end tex
-the absolute value (magnitude) of the argument <[x]>, by direct
-manipulation of the bit representation of <[x]>.
-
-RETURNS
-The calculated value is returned.
-
-PORTABILITY
-<<fabs>> is ANSI.
-<<fabsf>> is an extension.
-
-*/
-
-/******************************************************************
- * Floating-Point Absolute Value
- *
- * Input:
- *   x - floating-point number
- *
- * Output:
- *   absolute value of x
- *
- * Description:
- *   fabs computes the absolute value of a floating point number.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (fabs, (double),
-        double x)
-{
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        return (x);
-      case 0:
-        return (0.0);
-      default:
-        return (x < 0.0 ? -x : x);
-    }
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_floor.c b/newlib/libm/mathfp/s_floor.c
deleted file mode 100644
index 0dbc207f3..000000000
--- a/newlib/libm/mathfp/s_floor.c
+++ /dev/null
@@ -1,92 +0,0 @@
-
-/* @(#)z_floor.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-<<floor>>, <<floorf>>, <<ceil>>, <<ceilf>>---floor and ceiling
-INDEX
-        floor
-INDEX
-        floorf
-INDEX
-        ceil
-INDEX
-        ceilf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double floor(double <[x]>);
-        float floorf(float <[x]>);
-        double ceil(double <[x]>);
-        float ceilf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double floor(<[x]>)
-        double <[x]>;
-        float floorf(<[x]>)
-        float <[x]>;
-        double ceil(<[x]>)
-        double <[x]>;
-        float ceilf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-<<floor>> and <<floorf>> find
-@tex
-$\lfloor x \rfloor$,
-@end tex
-the nearest integer less than or equal to <[x]>.
-<<ceil>> and <<ceilf>> find
-@tex
-$\lceil x\rceil$,
-@end tex
-the nearest integer greater than or equal to <[x]>.
-
-RETURNS
-<<floor>> and <<ceil>> return the integer result as a double.
-<<floorf>> and <<ceilf>> return the integer result as a float.
-
-PORTABILITY
-<<floor>> and <<ceil>> are ANSI.
-<<floorf>> and <<ceilf>> are extensions.
-
-*/
-
-/*****************************************************************
- * floor 
- *
- * Input:
- *   x  - floating point value
- *
- * Output:
- *   Smallest integer less than x.
- *
- * Description:
- *   This routine returns the smallest integer less than x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double 
-_DEFUN (floor, (double),
-              double x)
-{
-  double f, y;
-
-  if (x > -1.0 && x < 1.0)
-    return (x >= 0 ? 0 : -1.0);
-
-  y = modf (x, &f);
-
-  if (y == 0.0)
-    return (x);
-
-  return (x >= 0 ? f : f - 1.0);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_fmod.c b/newlib/libm/mathfp/s_fmod.c
deleted file mode 100644
index ec86376af..000000000
--- a/newlib/libm/mathfp/s_fmod.c
+++ /dev/null
@@ -1,187 +0,0 @@
-
-/* @(#)z_fmod.c 1.0 98/08/13 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<fmod>>, <<fmodf>>---floating-point remainder (modulo)
-
-INDEX
-fmod
-INDEX
-fmodf
-
-ANSI_SYNOPSIS
-#include <math.h>
-double fmod(double <[x]>, double <[y]>)
-float fmodf(float <[x]>, float <[y]>)
-
-TRAD_SYNOPSIS
-#include <math.h>
-double fmod(<[x]>, <[y]>)
-double (<[x]>, <[y]>);
-
-float fmodf(<[x]>, <[y]>)
-float (<[x]>, <[y]>);
-
-DESCRIPTION
-The <<fmod>> and <<fmodf>> functions compute the floating-point
-remainder of <[x]>/<[y]> (<[x]> modulo <[y]>).
-
-RETURNS
-The <<fmod>> function returns the value
-@ifnottex
-<[x]>-<[i]>*<[y]>,
-@end ifnottex
-@tex
-$x-i\times y$,
-@end tex
-for the largest integer <[i]> such that, if <[y]> is nonzero, the
-result has the same sign as <[x]> and magnitude less than the
-magnitude of <[y]>.
-
-<<fmod(<[x]>,0)>> returns NaN, and sets <<errno>> to <<EDOM>>.
-
-You can modify error treatment for these functions using <<matherr>>.
-
-PORTABILITY
-<<fmod>> is ANSI C. <<fmodf>> is an extension.
-*/
-
-/* 
- * fmod(x,y)
- * Return x mod y in exact arithmetic
- * Method: shift and subtract
- */
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-static const double one = 1.0, Zero[] = {0.0, -0.0,};
-#else
-static double one = 1.0, Zero[] = {0.0, -0.0,};
-#endif
-
-#ifdef __STDC__
-	double fmod(double x, double y)
-#else
-	double fmod(x,y)
-	double x,y ;
-#endif
-{
-	__int32_t n,hx,hy,hz,ix,iy,sx,i;
-	__uint32_t lx,ly,lz;
-
-	EXTRACT_WORDS(hx,lx,x);
-	EXTRACT_WORDS(hy,ly,y);
-	sx = hx&0x80000000;		/* sign of x */
-	hx ^=sx;		/* |x| */
-	hy &= 0x7fffffff;	/* |y| */
-
-    /* purge off exception values */
-	if((hy|ly)==0||(hx>=0x7ff00000)||	/* y=0,or x not finite */
-	  ((hy|((ly|-ly)>>31))>0x7ff00000))	/* or y is NaN */
-	    return (x*y)/(x*y);
-	if(hx<=hy) {
-	    if((hx<hy)||(lx<ly)) return x;	/* |x|<|y| return x */
-	    if(lx==ly) 
-		return Zero[(__uint32_t)sx>>31];	/* |x|=|y| return x*0*/
-	}
-
-    /* determine ix = ilogb(x) */
-	if(hx<0x00100000) {	/* subnormal x */
-	    if(hx==0) {
-		for (ix = -1043, i=lx; i>0; i<<=1) ix -=1;
-	    } else {
-		for (ix = -1022,i=(hx<<11); i>0; i<<=1) ix -=1;
-	    }
-	} else ix = (hx>>20)-1023;
-
-    /* determine iy = ilogb(y) */
-	if(hy<0x00100000) {	/* subnormal y */
-	    if(hy==0) {
-		for (iy = -1043, i=ly; i>0; i<<=1) iy -=1;
-	    } else {
-		for (iy = -1022,i=(hy<<11); i>0; i<<=1) iy -=1;
-	    }
-	} else iy = (hy>>20)-1023;
-
-    /* set up {hx,lx}, {hy,ly} and align y to x */
-	if(ix >= -1022) 
-	    hx = 0x00100000|(0x000fffff&hx);
-	else {		/* subnormal x, shift x to normal */
-	    n = -1022-ix;
-	    if(n<=31) {
-	        hx = (hx<<n)|(lx>>(32-n));
-	        lx <<= n;
-	    } else {
-		hx = lx<<(n-32);
-		lx = 0;
-	    }
-	}
-	if(iy >= -1022) 
-	    hy = 0x00100000|(0x000fffff&hy);
-	else {		/* subnormal y, shift y to normal */
-	    n = -1022-iy;
-	    if(n<=31) {
-	        hy = (hy<<n)|(ly>>(32-n));
-	        ly <<= n;
-	    } else {
-		hy = ly<<(n-32);
-		ly = 0;
-	    }
-	}
-
-    /* fix point fmod */
-	n = ix - iy;
-	while(n--) {
-	    hz=hx-hy;lz=lx-ly; if(lx<ly) hz -= 1;
-	    if(hz<0){hx = hx+hx+(lx>>31); lx = lx+lx;}
-	    else {
-	    	if((hz|lz)==0) 		/* return sign(x)*0 */
-		    return Zero[(__uint32_t)sx>>31];
-	    	hx = hz+hz+(lz>>31); lx = lz+lz;
-	    }
-	}
-	hz=hx-hy;lz=lx-ly; if(lx<ly) hz -= 1;
-	if(hz>=0) {hx=hz;lx=lz;}
-
-    /* convert back to floating value and restore the sign */
-	if((hx|lx)==0) 			/* return sign(x)*0 */
-	    return Zero[(__uint32_t)sx>>31];	
-	while(hx<0x00100000) {		/* normalize x */
-	    hx = hx+hx+(lx>>31); lx = lx+lx;
-	    iy -= 1;
-	}
-	if(iy>= -1022) {	/* normalize output */
-	    hx = ((hx-0x00100000)|((iy+1023)<<20));
-	    INSERT_WORDS(x,hx|sx,lx);
-	} else {		/* subnormal output */
-	    n = -1022 - iy;
-	    if(n<=20) {
-		lx = (lx>>n)|((__uint32_t)hx<<(32-n));
-		hx >>= n;
-	    } else if (n<=31) {
-		lx = (hx<<(32-n))|(lx>>n); hx = sx;
-	    } else {
-		lx = hx>>(n-32); hx = sx;
-	    }
-	    INSERT_WORDS(x,hx|sx,lx);
-	    x *= one;		/* create necessary signal */
-	}
-	return x;		/* exact output */
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/s_frexp.c b/newlib/libm/mathfp/s_frexp.c
deleted file mode 100644
index 08611e9a7..000000000
--- a/newlib/libm/mathfp/s_frexp.c
+++ /dev/null
@@ -1,110 +0,0 @@
-
-/* @(#)z_frexp.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-       <<frexp>>, <<frexpf>>---split floating-point number
-INDEX
-        frexp
-INDEX
-        frexpf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double frexp(double <[val]>, int *<[exp]>);
-        float frexpf(float <[val]>, int *<[exp]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double frexp(<[val]>, <[exp]>)
-        double <[val]>;
-        int *<[exp]>;
-
-        float frexpf(<[val]>, <[exp]>)
-        float <[val]>;
-        int *<[exp]>;
-
-
-DESCRIPTION
-        All nonzero, normal numbers can be described as <[m]> * 2**<[p]>.
-        <<frexp>> represents the double <[val]> as a mantissa <[m]>
-        and a power of two <[p]>. The resulting mantissa will always
-        be greater than or equal to <<0.5>>, and less than <<1.0>> (as
-        long as <[val]> is nonzero). The power of two will be stored
-        in <<*>><[exp]>.
-
-@ifnottex
-<[m]> and <[p]> are calculated so that
-<[val]> is <[m]> times <<2>> to the power <[p]>.
-@end ifnottex
-@tex
-<[m]> and <[p]> are calculated so that
-$ val = m \times 2^p $.
-@end tex
-
-<<frexpf>> is identical, other than taking and returning
-floats rather than doubles.
-
-RETURNS
-<<frexp>> returns the mantissa <[m]>. If <[val]> is <<0>>, infinity,
-or Nan, <<frexp>> will set <<*>><[exp]> to <<0>> and return <[val]>.
-
-PORTABILITY
-<<frexp>> is ANSI.
-<<frexpf>> is an extension.
-
-
-*/
-
-/*****************************************************************
- * frexp
- *
- * Input:
- *   d   - floating point value
- *   exp - exponent value
- *
- * Output:
- *   A floating point value in the range [0.5, 1).
- *
- * Description:
- *   This routine breaks a floating point value into a number f and
- *   an exponent exp such that d = f * 2 ^ exp.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double frexp (double d, int *exp)
-{
-  double f;
-  __uint32_t hd, ld, hf, lf;
-
-  EXTRACT_WORDS (hd, ld, d);
-
-  /* Get the exponent. */
-  *exp = ((hd & 0x7ff00000) >> 20) - 1022;
-
-  /* Get the mantissa. */ 
-  lf = ld;
-  hf = hd & 0x800fffff;  
-  hf |= 0x3fe00000;
-
-  INSERT_WORDS (f, hf, lf);
-
-  /* Check for special values. */
-  switch (numtest (f))
-    {
-      case NAN:
-      case INF:
-        errno = EDOM;
-        *exp = 0;
-        return (f);
-    }
-
-  return (f);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_infconst.c b/newlib/libm/mathfp/s_infconst.c
deleted file mode 100644
index e6b86d497..000000000
--- a/newlib/libm/mathfp/s_infconst.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Infinity as a constant value.   This is used for HUGE_VAL.
- * Added by Cygnus Support.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-#ifdef __IEEE_BIG_ENDIAN
-const union __dmath __infinity[1] = {{ 0x7ff00000, 0 }};
-#else
-const union __dmath __infinity[1] = {{ 0, 0x7ff00000 }};
-#endif
-#else /* defined (_DOUBLE_IS_32BITS) */
-const union __dmath __infinity[1] = {{ 0x7f800000, 0 }};
-#endif /* defined (_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/s_isinf.c b/newlib/libm/mathfp/s_isinf.c
deleted file mode 100644
index fe9f54799..000000000
--- a/newlib/libm/mathfp/s_isinf.c
+++ /dev/null
@@ -1,37 +0,0 @@
-
-/* @(#)z_isinf.c 1.0 98/08/13 */
-/******************************************************************
- * isinf
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates if the number is infinite.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is infinite (1) or is finite (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-int isinf (double x)
-{
-  __uint32_t lx, hx;
-  int exp;
-
-  EXTRACT_WORDS (hx, lx, x);
-  exp = (hx & 0x7ff00000) >> 20;
-
-  if ((exp == 0x7ff) && ((hx & 0xf0000 || lx) == 0))
-    return (1);
-  else
-    return (0);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_isnan.c b/newlib/libm/mathfp/s_isnan.c
deleted file mode 100644
index 03cfeee59..000000000
--- a/newlib/libm/mathfp/s_isnan.c
+++ /dev/null
@@ -1,125 +0,0 @@
-
-/* @(#)z_isnan.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-        <<isnan>>,<<isnanf>>,<<isinf>>,<<isinff>>,<<finite>>,<<finitef>>---test
-for exceptional numbers
-
-INDEX
-        isnan
-INDEX
-        isinf
-INDEX
-        finite
-
-INDEX
-        isnanf
-INDEX
-        isinff
-INDEX
-        finitef
-
-ANSI_SYNOPSIS
-        #include <ieeefp.h>
-        int isnan(double <[arg]>);
-        int isinf(double <[arg]>);
-        int finite(double <[arg]>);
-        int isnanf(float <[arg]>);
-        int isinff(float <[arg]>);
-        int finitef(float <[arg]>);
-
-TRAD_SYNOPSIS
-        #include <ieeefp.h>
-        int isnan(<[arg]>)
-        double <[arg]>;
-        int isinf(<[arg]>)
-        double <[arg]>;
-        int finite(<[arg]>);
-        double <[arg]>;
-        int isnanf(<[arg]>);
-        float <[arg]>;
-        int isinff(<[arg]>);
-        float <[arg]>;
-        int finitef(<[arg]>);
-        float <[arg]>;
-
-
-DESCRIPTION
-        These functions provide information on the floating-point
-        argument supplied.
-
-        There are five major number formats -
-        o+
-        o zero
-         a number which contains all zero bits.
-        o subnormal
-         Is used to represent  number with a zero exponent, but a nonzero fract
-ion.
-         o normal
-          A number with an exponent, and a fraction
-        o infinity
-          A number with an all 1's exponent and a zero fraction.
-        o NAN
-          A number with an all 1's exponent and a nonzero fraction.
-
-        o-
-
-        <<isnan>> returns 1 if the argument is a nan. <<isinf>>
-        returns 1 if the argument is infinity.  <<finite>> returns 1 if the
-        argument is zero, subnormal or normal.
-
-        The <<isnanf>>, <<isinff>> and <<finitef>> perform the same
-        operations as their <<isnan>>, <<isinf>> and <<finite>>
-        counterparts, but on single-precision floating-point numbers.
-
-QUICKREF
-        isnan - pure
-QUICKREF
-        isinf - pure
-QUICKREF
-        finite - pure
-QUICKREF
-        isnan - pure
-QUICKREF
-        isinf - pure
-QUICKREF
-        finite - pure
-*/
-
-
-/******************************************************************
- * isnan
- *
- * Input:
- *   x - pointer to a floating-point value
- *
- * Output:
- *   An integer that indicates if the number is NaN.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is NaN (1) or is finite (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-int isnan (double x)
-{
-  __uint32_t lx, hx;
-  int exp;
-
-  EXTRACT_WORDS (hx, lx, x);
-  exp = (hx & 0x7ff00000) >> 20;
-
-  if ((exp == 0x7ff) && (hx & 0xf0000 || lx))
-    return (1);
-  else
-    return (0);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_ispos.c b/newlib/libm/mathfp/s_ispos.c
deleted file mode 100644
index 2077999c3..000000000
--- a/newlib/libm/mathfp/s_ispos.c
+++ /dev/null
@@ -1,35 +0,0 @@
-
-/* @(#)z_ispos.c 1.0 98/08/13 */
-/******************************************************************
- * Numtest
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates if the number is positive.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is positive (1) or negative (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-int ispos (double x)
-{
-  __uint32_t hx;
-
-  GET_HIGH_WORD (hx, x);
-
-  if (hx & 0x80000000)
-    return (0);
-  else
-    return (1);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_ldexp.c b/newlib/libm/mathfp/s_ldexp.c
deleted file mode 100644
index 5ce2710ac..000000000
--- a/newlib/libm/mathfp/s_ldexp.c
+++ /dev/null
@@ -1,125 +0,0 @@
-
-/* @(#)z_ldexp.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-       <<ldexp>>, <<ldexpf>>---load exponent
-
-INDEX
-        ldexp
-INDEX
-        ldexpf
-
-ANSI_SYNOPSIS
-       #include <math.h>
-       double ldexp(double <[val]>, int <[exp]>);
-       float ldexpf(float <[val]>, int <[exp]>);
-
-TRAD_SYNOPSIS
-       #include <math.h>
-
-       double ldexp(<[val]>, <[exp]>)
-              double <[val]>;
-              int <[exp]>;
-
-       float ldexpf(<[val]>, <[exp]>)
-              float <[val]>;
-              int <[exp]>;
-
-DESCRIPTION
-<<ldexp>> calculates the value
-@ifnottex
-<[val]> times 2 to the power <[exp]>.
-@end ifnottex
-@tex
-$val\times 2^{exp}$.
-@end tex
-<<ldexpf>> is identical, save that it takes and returns <<float>>
-rather than <<double>> values.
-
-RETURNS
-<<ldexp>> returns the calculated value.
-
-Underflow and overflow both set <<errno>> to <<ERANGE>>.
-On underflow, <<ldexp>> and <<ldexpf>> return 0.0.
-On overflow, <<ldexp>> returns plus or minus <<HUGE_VAL>>.
-
-PORTABILITY
-<<ldexp>> is ANSI, <<ldexpf>> is an extension.
-
-*/
-
-/******************************************************************
- * ldexp
- *
- * Input:
- *   d - a floating point value
- *   e - an exponent value
- *
- * Output:
- *   A floating point value f such that f = d * 2 ^ e.
- *
- * Description:
- *   This function creates a floating point number f such that
- *   f = d * 2 ^ e.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#define DOUBLE_EXP_OFFS 1023
-
-double
-_DEFUN (ldexp, (double, int),
-        double d _AND
-        int e)
-{
-  int exp;
-  __uint32_t hd;
-
-  GET_HIGH_WORD (hd, d);
-
-  /* Check for special values and then scale d by e. */
-  switch (numtest (d))
-    {
-      case NAN:
-        errno = EDOM;
-        break;
-
-      case INF:
-        errno = ERANGE;
-        break;
-
-      case 0:
-        break;
-
-      default:
-        exp = (hd & 0x7ff00000) >> 20;
-        exp += e;
-
-        if (exp > DBL_MAX_EXP + DOUBLE_EXP_OFFS)
-         {
-           errno = ERANGE;
-           d = z_infinity.d;
-         }
-        else if (exp < DBL_MIN_EXP + DOUBLE_EXP_OFFS)
-         {
-           errno = ERANGE;
-           d = -z_infinity.d;
-         }
-        else
-         {
-           hd &= 0x800fffff;
-           hd |= exp << 20;
-           SET_HIGH_WORD (d, hd);
-         }
-    }
-
-    return (d);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_log.c b/newlib/libm/mathfp/s_log.c
deleted file mode 100644
index 27b959831..000000000
--- a/newlib/libm/mathfp/s_log.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* @(#)z_log.c 1.0 98/08/13 */
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   natural logarithm of x
- *
- * Description:
- *   This routine returns the natural logarithm of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (log, (double),
-        double x)
-{
-  return (logarithm (x, 0));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_log10.c b/newlib/libm/mathfp/s_log10.c
deleted file mode 100644
index 080cecd81..000000000
--- a/newlib/libm/mathfp/s_log10.c
+++ /dev/null
@@ -1,68 +0,0 @@
-
-/* @(#)z_log10.c 1.0 98/08/13 */
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   logarithm of x
- *
- * Description:
- *   This routine returns the logarithm of x (base 10).
- *
- *****************************************************************/
-
-/*
-FUNCTION
-        <<log10>>, <<log10f>>---base 10 logarithms
-
-INDEX
-log10
-INDEX
-log10f
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double log10(double <[x]>);
-        float log10f(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double log10(<[x]>)
-        double <[x]>;
-
-        float log10f(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-<<log10>> returns the base 10 logarithm of <[x]>.
-It is implemented as <<log(<[x]>) / log(10)>>.
-
-<<log10f>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-<<log10>> and <<log10f>> return the calculated value.
-
-See the description of <<log>> for information on errors.
-
-PORTABILITY
-<<log10>> is ANSI C.  <<log10f>> is an extension.
-
-*/
-
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (log10, (double),
-        double x)
-{
-  return (logarithm (x, 1));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_logarithm.c b/newlib/libm/mathfp/s_logarithm.c
deleted file mode 100644
index ee7c7069e..000000000
--- a/newlib/libm/mathfp/s_logarithm.c
+++ /dev/null
@@ -1,135 +0,0 @@
-
-/* @(#)z_logarithm.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-       <<log>>, <<logf>>, <<log10>>, <<log10f>>, <<logarithm>>, <<logarithmf>>---natural or base 10 logarithms
-
-INDEX
-    log
-INDEX
-    logf
-INDEX
-    log10
-INDEX
-    log10f
-
-ANSI_SYNOPSIS
-       #include <math.h>
-       double log(double <[x]>);
-       float logf(float <[x]>);
-       double log10(double <[x]>);
-       float log10f(float <[x]>);
-
-TRAD_SYNOPSIS
-       #include <math.h>
-       double log(<[x]>);
-       double <[x]>;
-
-       float logf(<[x]>);
-       float <[x]>;
-
-       double log10(<[x]>);
-       double <[x]>;
-
-       float log10f(<[x]>);
-       float <[x]>;
-
-DESCRIPTION
-Return the natural or base 10 logarithm of <[x]>, that is, its logarithm base e
-(where e is the base of the natural system of logarithms, 2.71828@dots{}) or
-base 10.
-<<log>> and <<logf>> are identical save for the return and argument types.
-<<log10>> and <<log10f>> are identical save for the return and argument types.
-
-RETURNS
-Normally, returns the calculated value.  When <[x]> is zero, the
-returned value is <<-HUGE_VAL>> and <<errno>> is set to <<ERANGE>>.
-When <[x]> is negative, the returned value is <<-HUGE_VAL>> and
-<<errno>> is set to <<EDOM>>.  You can control the error behavior via
-<<matherr>>.
-
-PORTABILITY
-<<log>> is ANSI, <<logf>> is an extension.
-<<log10>> is ANSI, <<log10f>> is an extension.
-*/
-
-
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *   ten - indicates base ten numbers
- *
- * Output:
- *   logarithm of x
- *
- * Description:
- *   This routine calculates logarithms.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double a[] = { -0.64124943423745581147e+02,
-                             0.16383943563021534222e+02,
-                            -0.78956112887481257267 };
-static const double b[] = { -0.76949932108494879777e+03,
-                             0.31203222091924532844e+03,
-                            -0.35667977739034646171e+02 };
-static const double C1 =  22713.0 / 32768.0;
-static const double C2 =  1.428606820309417232e-06;
-static const double C3 =  0.43429448190325182765;
-
-double
-_DEFUN (logarithm, (double, int),
-        double x _AND
-        int ten)
-{
-  int N;
-  double f, w, z;
-
-  /* Check for domain error here. */
-  if (x <= 0.0)
-    {
-      errno = ERANGE;
-      return (z_notanum.d);
-    }
-
-  /* Get the exponent and mantissa where x = f * 2^N. */
-  f = frexp (x, &N);
-
-  z = f - 0.5;
-
-  if (f > __SQRT_HALF)
-    z = (z - 0.5) / (f * 0.5 + 0.5);
-  else
-    {
-      N--;
-      z /= (z * 0.5 + 0.5);
-    }
-  w = z * z;
-
-  /* Use Newton's method with 4 terms. */
-  z += z * w * ((a[2] * w + a[1]) * w + a[0]) / (((w + b[2]) * w + b[1]) * w + b[0]);
-
-  if (N != 0)
-    z = (N * C2 + z) + N * C1;
-
-  if (ten)
-    z *= C3;
-
-  return (z);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_mathcnst.c b/newlib/libm/mathfp/s_mathcnst.c
deleted file mode 100644
index 7865c7f78..000000000
--- a/newlib/libm/mathfp/s_mathcnst.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* @(#)z_mathcnst.c 1.0 98/08/13 */
-
-#include "zmath.h"
-#include "fdlibm.h"
-
-double BIGX = 7.09782712893383973096e+02;
-double SMALLX = -7.45133219101941108420e+02;
-double z_rooteps = 7.4505859692e-9;
-float  z_rooteps_f = 1.7263349182589107e-4;
-
-ufloat z_hugeval_f  = { 0x7f800000 };
-ufloat z_infinity_f = { 0x7f800000 };
-ufloat z_notanum_f  = { 0xffd00000 };
-
-#ifdef ___IEEE_LITTLE_ENDIAN
-udouble z_hugeval  = { 0x7ff00000, 0 };
-udouble z_infinity = { 0x7ff00000, 0 };
-udouble z_notanum  = { 0xfff80000, 0 };
-#else
-udouble z_hugeval  = { 0, 0x7ff00000 };
-udouble z_infinity = { 0, 0x7ff00000 };
-udouble z_notanum  = { 0, 0xfff80000 };
-#endif /* ___IEEE_LITTLE_ENDIAN */
-
diff --git a/newlib/libm/mathfp/s_numtest.c b/newlib/libm/mathfp/s_numtest.c
deleted file mode 100644
index b41bb87f4..000000000
--- a/newlib/libm/mathfp/s_numtest.c
+++ /dev/null
@@ -1,58 +0,0 @@
-
-/* @(#)z_numtest.c 1.0 98/08/13 */
-/******************************************************************
- * Numtest
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates what kind of number was passed in:
- *     NUM = 3 - a finite value
- *     NAN = 2 - not a number
- *     INF = 1 - an infinite value
- *           0 - zero
- *
- * Description:
- *   This routine returns an integer that indicates the character-
- *   istics of the number that was passed in. 
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-int 
-_DEFUN (numtest, (double),
-        double x)
-{
-  __uint32_t hx, lx;
-  int exp;
-
-  EXTRACT_WORDS (hx, lx, x);
-
-  exp = (hx & 0x7ff00000) >> 20;
-
-  /* Check for a zero input. */
-  if (x == 0.0)
-    {
-      return (0);
-    }
-
-  /* Check for not a number or infinity. */
-  if (exp == 0x7ff)
-    {
-      if(hx & 0xf0000 || lx)
-        return (NAN);
-      else
-        return (INF);
-    }
-     
-  /* Otherwise it's a finite value. */ 
-  else
-    return (NUM);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_pow.c b/newlib/libm/mathfp/s_pow.c
deleted file mode 100644
index 3514510d0..000000000
--- a/newlib/libm/mathfp/s_pow.c
+++ /dev/null
@@ -1,163 +0,0 @@
-
-/* @(#)z_pow.c 1.0 98/08/13 */
-
-/*
-FUNCTION
-        <<pow>>, <<powf>>---x to the power y
-INDEX
-        pow
-INDEX
-        powf
-
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double pow(double <[x]>, double <[y]>);
-        float pow(float <[x]>, float <[y]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double pow(<[x]>, <[y]>);
-        double <[x]>, <[y]>;
-
-        float pow(<[x]>, <[y]>);
-        float <[x]>, <[y]>;
-
-DESCRIPTION
-        <<pow>> and <<powf>> calculate <[x]> raised to the exponent <[y]>.
-        @tex
-        (That is, $x^y$.)
-        @end tex
-
-RETURNS
-        On success, <<pow>> and <<powf>> return the value calculated.
-
-        When the argument values would produce overflow, <<pow>>
-        returns <<HUGE_VAL>> and set <<errno>> to <<ERANGE>>.  If the
-        argument <[x]> passed to <<pow>> or <<powf>> is a negative
-        noninteger, and <[y]> is also not an integer, then <<errno>>
-        is set to <<EDOM>>.  If <[x]> and <[y]> are both 0, then
-        <<pow>> and <<powf>> return <<1>>.
-
-        You can modify error handling for these functions using <<matherr>>.
-
-PORTABILITY
-        <<pow>> is ANSI C. <<powf>> is an extension.  */
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double pow (double x, double y)
-{
-  double d, k, t, r = 1.0;
-  int n, sign, exponent_is_even_int = 0;
-  __uint32_t px;
-
-  GET_HIGH_WORD (px, x);
-
-  k = modf (y, &d);
-
-  if (k == 0.0)
-    {
-      /* Exponent y is an integer. */
-      if (modf (ldexp (y, -1), &t))
-        {
-          /* y is odd. */
-          exponent_is_even_int = 0;
-        }
-      else
-        {
-          /* y is even. */
-          exponent_is_even_int = 1;
-        }
-    }
-
-  if (x == 0.0 && y <= 0.0)
-    {
-      errno = EDOM;
-    }
-  else if ((t = y * log (fabs (x))) >= BIGX) 
-    {
-      errno = ERANGE;
-      if (px & 0x80000000) 
-        {
-          /* x is negative. */
-          if (k) 
-            {
-              /* y is not an integer. */
-              errno = EDOM;
-              x = 0.0;
-            }
-          else if (exponent_is_even_int)
-            x = z_infinity.d;
-          else
-            x = -z_infinity.d;
-        }
-      else
-        {
-          x = z_infinity.d;
-        }
-    }
-  else if (t < SMALLX)
-    {
-      errno = ERANGE;
-      x = 0.0;
-    }
-  else 
-    {
-      if ( !k && fabs(d) <= 32767 ) 
-        {
-          n = (int) d;
-
-          if ((sign = (n < 0)))
-            n = -n;
-
-          while ( n > 0 ) 
-            {
-              if ((unsigned int) n % 2) 
-                r *= x;
-              x *= x;
-              n = (unsigned int) n / 2;
-            }
-
-          if (sign)
-            r = 1.0 / r;
-
-          return r;
-        }
-      else 
-        {
-          if ( px & 0x80000000 ) 
-            {
-              /* x is negative. */
-              if ( k ) 
-                {
-                  /* y is not an integer. */
-                  errno = EDOM;
-                  return 0.0;
-                }
-            }
-
-          x = exp (t);
-
-          if (!exponent_is_even_int)
-            {
-              if (px & 0x80000000)
-                {
-                  /* y is an odd integer, and x is negative,
-                     so the result is negative. */
-                  GET_HIGH_WORD (px, x);
-                  px |= 0x80000000;
-                  SET_HIGH_WORD (x, px);
-                }
-            }
-        }
-    }
-
-  return x;
-}
-
-#endif _DOUBLE_IS_32BITS
diff --git a/newlib/libm/mathfp/s_signif.c b/newlib/libm/mathfp/s_signif.c
deleted file mode 100644
index 76b5f7cb6..000000000
--- a/newlib/libm/mathfp/s_signif.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)s_signif.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
- * significand(x) computes just
- * 	scalb(x, (double) -ilogb(x)),
- * for exercising the fraction-part(F) IEEE 754-1985 test vector.
- */
-
-#include "fdlibm.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double significand(double x)
-#else
-	double significand(x)
-	double x;
-#endif
-{
-	return scalb(x,(double) -ilogb(x));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sin.c b/newlib/libm/mathfp/s_sin.c
deleted file mode 100644
index 2051304e0..000000000
--- a/newlib/libm/mathfp/s_sin.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* @(#)z_sin.c 1.0 98/08/13 */
-/******************************************************************
- * Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   sine of x
- *
- * Description:
- *   This routine returns the sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (sin, (double),
-        double x)
-{
-  return (sine (x, 0));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sincos.c b/newlib/libm/mathfp/s_sincos.c
deleted file mode 100644
index e313e6f1d..000000000
--- a/newlib/libm/mathfp/s_sincos.c
+++ /dev/null
@@ -1,32 +0,0 @@
-
-/* @(#)z_sin.c 1.0 98/08/13 */
-/******************************************************************
- * Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   sine of x
- *
- * Description:
- *   This routine returns the sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-void
-_DEFUN (sincos, (x, sinx, cosx),
-        double x _AND
-        double *sinx _AND
-        double *cosx)
-{
-  *sinx = sin (x);
-  *cosx = cos (x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sine.c b/newlib/libm/mathfp/s_sine.c
deleted file mode 100644
index 9642f4a56..000000000
--- a/newlib/libm/mathfp/s_sine.c
+++ /dev/null
@@ -1,166 +0,0 @@
-
-/* @(#)z_sine.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<sin>>, <<cos>>, <<sine>>, <<sinf>>, <<cosf>>, <<sinef>>---sine or cosine
-INDEX
-sin
-INDEX
-sinf
-INDEX
-cos
-INDEX
-cosf
-ANSI_SYNOPSIS
-        #include <math.h>
-        double sin(double <[x]>);
-        float  sinf(float <[x]>);
-        double cos(double <[x]>);
-        float cosf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double sin(<[x]>)
-        double <[x]>;
-        float  sinf(<[x]>)
-        float <[x]>;
-
-        double cos(<[x]>)
-        double <[x]>;
-        float cosf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-        <<sin>> and <<cos>> compute (respectively) the sine and cosine
-        of the argument <[x]>.  Angles are specified in radians.
-RETURNS
-        The sine or cosine of <[x]> is returned.
-
-PORTABILITY
-        <<sin>> and <<cos>> are ANSI C.
-        <<sinf>> and <<cosf>> are extensions.
-
-QUICKREF
-        sin ansi pure
-        sinf - pure
-*/
-
-/******************************************************************
- * sine
- *
- * Input:
- *   x - floating point value
- *   cosine - indicates cosine value
- *
- * Output:
- *   Sine of x.
- *
- * Description:
- *   This routine calculates sines and cosines.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double HALF_PI = 1.57079632679489661923;
-static const double ONE_OVER_PI = 0.31830988618379067154;
-static const double r[] = { -0.16666666666666665052,
-                             0.83333333333331650314e-02,
-                            -0.19841269841201840457e-03,
-                             0.27557319210152756119e-05,
-                            -0.25052106798274584544e-07,
-                             0.16058936490371589114e-09,
-                            -0.76429178068910467734e-12,
-                             0.27204790957888846175e-14 };
-
-double
-_DEFUN (sine, (double, int),
-        double x _AND
-        int cosine)
-{
-  int sgn, N;
-  double y, XN, g, R, res;
-  double YMAX = 210828714.0;
-
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = EDOM;
-        return (z_notanum.d); 
-    }
-
-  /* Use sin and cos properties to ease computations. */
-  if (cosine)
-    {
-      sgn = 1;
-      y = fabs (x) + HALF_PI;
-    }
-  else
-    {
-      if (x < 0.0)
-        {
-          sgn = -1;
-          y = -x;
-        }
-      else
-        {
-          sgn = 1;
-          y = x;
-        }
-    }
-
-  /* Check for values of y that will overflow here. */
-  if (y > YMAX)
-    {
-      errno = ERANGE;
-      return (x);
-    }
-
-  /* Calculate the exponent. */
-  if (y < 0.0)
-    N = (int) (y * ONE_OVER_PI - 0.5);
-  else
-    N = (int) (y * ONE_OVER_PI + 0.5);
-  XN = (double) N;
-
-  if (N & 1)
-    sgn = -sgn;
-
-  if (cosine)
-    XN -= 0.5;
-
-  y = fabs (x) - XN * __PI;
-
-  if (-z_rooteps < y && y < z_rooteps)
-    res = y;
-
-  else
-    {
-      g = y * y;
-
-      /* Calculate the Taylor series. */
-      R = (((((((r[6] * g + r[5]) * g + r[4]) * g + r[3]) * g + r[2]) * g + r[1]) * g + r[0]) * g);
-
-      /* Finally, compute the result. */
-      res = y + y * R;
-    }
- 
-  res *= sgn;
-
-  return (res);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sineh.c b/newlib/libm/mathfp/s_sineh.c
deleted file mode 100644
index 6f5e208b0..000000000
--- a/newlib/libm/mathfp/s_sineh.c
+++ /dev/null
@@ -1,185 +0,0 @@
-
-/* @(#)z_sineh.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<sinh>>, <<sinhf>>, <<cosh>>, <<coshf>>, <<sineh>>---hyperbolic sine or cosine
-
-INDEX
-        sinh
-INDEX
-        sinhf
-INDEX
-        cosh
-INDEX
-        coshf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double sinh(double <[x]>);
-        float  sinhf(float <[x]>);
-        double cosh(double <[x]>);
-        float  coshf(float <[x]>);
-TRAD_SYNOPSIS
-        #include <math.h>
-        double sinh(<[x]>)
-        double <[x]>;
-
-        float  sinhf(<[x]>)
-        float <[x]>;
-
-        double cosh(<[x]>)
-        double <[x]>;
-
-        float  coshf(<[x]>)
-        float <[x]>;
-
-DESCRIPTION
-        <<sinh>> and <<cosh>> compute the hyperbolic sine or cosine
-        of the argument <[x]>.
-        Angles are specified in radians.   <<sinh>>(<[x]>) is defined as
-        @ifnottex
-        . (exp(<[x]>) - exp(-<[x]>))/2
-        @end ifnottex
-        @tex
-        $${e^x - e^{-x}}\over 2$$
-        @end tex
-        <<cosh>> is defined as
-        @ifnottex
-        . (exp(<[x]>) - exp(-<[x]>))/2
-        @end ifnottex
-        @tex
-        $${e^x + e^{-x}}\over 2$$
-        @end tex
-
-        <<sinhf>> and <<coshf>> are identical, save that they take 
-        and returns <<float>> values.
-
-RETURNS
-        The hyperbolic sine or cosine of <[x]> is returned.
-
-        When the correct result is too large to be representable (an
-        overflow),  the functions return <<HUGE_VAL>> with the
-        appropriate sign, and sets the global value <<errno>> to
-        <<ERANGE>>.
-
-PORTABILITY
-        <<sinh>> is ANSI C.
-        <<sinhf>> is an extension.
-        <<cosh>> is ANSI C.
-        <<coshf>> is an extension.
-
-*/
-
-/******************************************************************
- * Hyperbolic Sine 
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic sine of x
- *
- * Description:
- *   This routine calculates hyperbolic sines.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const double q[] = { -0.21108770058106271242e+7,
-                             0.36162723109421836460e+5,
-                            -0.27773523119650701667e+3 };
-static const double p[] = { -0.35181283430177117881e+6,
-                            -0.11563521196851768270e+5,
-                            -0.16375798202630751372e+3,
-                            -0.78966127417357099479 };
-static const double LNV = 0.6931610107421875000;
-static const double INV_V2 = 0.24999308500451499336;
-static const double V_OVER2_MINUS1 = 0.13830277879601902638e-4;
-
-double
-_DEFUN (sineh, (double, int),
-        double x _AND
-        int cosineh)
-{
-  double y, f, P, Q, R, res, z, w;
-  int sgn = 1;
-  double WBAR = 18.55;
-
-  /* Check for special values. */
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        return (ispos (x) ? z_infinity.d : -z_infinity.d);
-    }
-
-  y = fabs (x);
-
-  if (!cosineh && x < 0.0)
-    sgn = -1;
-
-  if ((y > 1.0 && !cosineh) || cosineh)
-    {
-      if (y > BIGX)
-        {
-          w = y - LNV;
-          
-          /* Check for w > maximum here. */
-          if (w > BIGX)
-            {
-              errno = ERANGE;
-              return (x);
-            }
-
-          z = exp (w);
-
-          if (w > WBAR)
-            res = z * (V_OVER2_MINUS1 + 1.0);
-        }
-
-      else
-        {
-          z = exp (y);
-          if (cosineh)
-            res = (z + 1 / z) / 2.0;
-          else
-            res = (z - 1 / z) / 2.0;
-        }
-
-      if (sgn < 0)
-        res = -res;
-    }
-  else
-    {
-      /* Check for y being too small. */
-      if (y < z_rooteps)
-        {
-          res = x;
-        }
-      /* Calculate the Taylor series. */
-      else
-        { 
-          f = x * x;
-          Q = ((f + q[2]) * f + q[1]) * f + q[0];
-          P = ((p[3] * f + p[2]) * f + p[1]) * f + p[0];
-          R = f * (P / Q); 
-
-          res = x + x * R;
-        }
-    }
-
-  return (res);
-}
diff --git a/newlib/libm/mathfp/s_sinf.c b/newlib/libm/mathfp/s_sinf.c
deleted file mode 100644
index b738a49b9..000000000
--- a/newlib/libm/mathfp/s_sinf.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_sinf.c 1.0 98/08/13 */
-/******************************************************************
- * Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   sine of x
- *
- * Description:
- *   This routine returns the sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (sinf, (float),
-        float x)
-{
-  return (sinef (x, 0));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double sin (double x)
-{
-  return (double) sinf ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sinh.c b/newlib/libm/mathfp/s_sinh.c
deleted file mode 100644
index c600ee0da..000000000
--- a/newlib/libm/mathfp/s_sinh.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* @(#)z_sinh.c 1.0 98/08/13 */
-/******************************************************************
- * Hyperbolic Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic sine of x
- *
- * Description:
- *   This routine returns the hyperbolic sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (sinh, (double),
-        double x)
-{
-  return (sineh (x, 0));
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_sqrt.c b/newlib/libm/mathfp/s_sqrt.c
deleted file mode 100644
index bafbb38b1..000000000
--- a/newlib/libm/mathfp/s_sqrt.c
+++ /dev/null
@@ -1,129 +0,0 @@
-
-/* @(#)z_sqrt.c 1.0 98/08/13 */
-/*****************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- *****************************************************************/
-
-/*
-FUNCTION
-        <<sqrt>>, <<sqrtf>>---positive square root
-
-INDEX
-        sqrt
-INDEX
-        sqrtf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double sqrt(double <[x]>);
-        float  sqrtf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double sqrt(<[x]>);
-        float  sqrtf(<[x]>);
-
-DESCRIPTION
-        <<sqrt>> computes the positive square root of the argument.
-
-RETURNS
-        On success, the square root is returned. If <[x]> is real and
-        positive, then the result is positive.  If <[x]> is real and
-        negative, the global value <<errno>> is set to <<EDOM>> (domain error).
-
-
-PORTABILITY
-        <<sqrt>> is ANSI C.  <<sqrtf>> is an extension.
-*/
-
-/******************************************************************
- * Square Root
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   square-root of x
- *
- * Description:
- *   This routine performs floating point square root.
- *
- *   The initial approximation is computed as
- *     y0 = 0.41731 + 0.59016 * f
- *   where f is a fraction such that x = f * 2^exp.
- *
- *   Three Newton iterations in the form of Heron's formula
- *   are then performed to obtain the final value:
- *     y[i] = (y[i-1] + f / y[i-1]) / 2, i = 1, 2, 3.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-double
-_DEFUN (sqrt, (double),
-        double x)
-{
-  double f, y;
-  int exp, i, odd;
-
-  /* Check for special values. */
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        if (ispos (x))
-          {
-            errno = EDOM;
-            return (z_notanum.d);
-          }
-        else
-          {
-            errno = ERANGE;
-            return (z_infinity.d);
-          }
-    }
-
-  /* Initial checks are performed here. */
-  if (x == 0.0)
-    return (0.0);
-  if (x < 0)
-    {
-      errno = EDOM;
-      return (z_notanum.d);
-    }
-
-  /* Find the exponent and mantissa for the form x = f * 2^exp. */
-  f = frexp (x, &exp);
-
-  odd = exp & 1;
-
-  /* Get the initial approximation. */
-  y = 0.41731 + 0.59016 * f;
-
-  f /= 2.0;
-  /* Calculate the remaining iterations. */
-  for (i = 0; i < 3; ++i)
-    y = y / 2.0 + f / y;
-
-  /* Calculate the final value. */
-  if (odd)
-    {
-      y *= __SQRT_HALF;
-      exp++;
-    }
-  exp >>= 1;
-  y = ldexp (y, exp);
-
-  return (y);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_tan.c b/newlib/libm/mathfp/s_tan.c
deleted file mode 100644
index 725aeec26..000000000
--- a/newlib/libm/mathfp/s_tan.c
+++ /dev/null
@@ -1,139 +0,0 @@
-
-/* @(#)z_tan.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-
-/*
-FUNCTION
-        <<tan>>, <<tanf>>---tangent
-
-INDEX
-tan
-INDEX
-tanf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double tan(double <[x]>);
-        float tanf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double tan(<[x]>)
-        double <[x]>;
-
-        float tanf(<[x]>)
-        float <[x]>;
-
-
-DESCRIPTION
-<<tan>> computes the tangent of the argument <[x]>.
-Angles are specified in radians.
-
-<<tanf>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-The tangent of <[x]> is returned.
-
-PORTABILITY
-<<tan>> is ANSI. <<tanf>> is an extension.
-*/
-
-/******************************************************************
- * Tangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   tangent of x
- *
- * Description:
- *   This routine calculates the tangent of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double TWO_OVER_PI = 0.63661977236758134308;
-static const double p[] = { -0.13338350006421960681,
-                             0.34248878235890589960e-2,
-                            -0.17861707342254426711e-4 };
-static const double q[] = { -0.46671683339755294240,
-                             0.25663832289440112864e-1,
-                            -0.31181531907010027307e-3,
-                             0.49819433993786512270e-6 };
-
-double
-_DEFUN (tan, (double),
-        double x)
-{
-  double y, f, g, XN, xnum, xden, res;
-  int N;
-
-  /* Check for special values. */
-  switch (numtest (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = EDOM;
-        return (z_notanum.d);
-    }
-
-  y = fabs (x);
-
-  /* Check for values that are out of our range. */
-  if (y > 105414357.0)
-    {
-      errno = ERANGE;
-      return (y);
-    }
-
-  if (x < 0.0)
-    N = (int) (x * TWO_OVER_PI - 0.5);
-  else
-    N = (int) (x * TWO_OVER_PI + 0.5);
-
-  XN = (double) N;
-
-  f = x - N * __PI_OVER_TWO;
-
-  /* Check for values that are too small. */
-  if (-z_rooteps < f && f < z_rooteps)
-    {
-      xnum = f;
-      xden = 1.0;
-    }
-
-  /* Calculate the polynomial. */ 
-  else
-    { 
-      g = f * f;
-
-      xnum = f * ((p[2] * g + p[1]) * g + p[0]) * g + f;
-      xden = (((q[3] * g + q[2]) * g + q[1]) * g + q[0]) * g + 1.0;
-    }
-
-  if (N & 1)
-    {
-      xnum = -xnum;
-      res = xden / xnum;
-    } 
-  else
-    {
-      res = xnum / xden;
-    }
-
-  return (res);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_tanh.c b/newlib/libm/mathfp/s_tanh.c
deleted file mode 100644
index a19855e0b..000000000
--- a/newlib/libm/mathfp/s_tanh.c
+++ /dev/null
@@ -1,117 +0,0 @@
-
-/* @(#)z_tanh.c 1.0 98/08/13 */
-/*****************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- *****************************************************************/
-
-/*
-
-FUNCTION
-        <<tanh>>, <<tanhf>>---hyperbolic tangent
-
-INDEX
-tanh
-INDEX
-tanhf
-
-ANSI_SYNOPSIS
-        #include <math.h>
-        double tanh(double <[x]>);
-        float tanhf(float <[x]>);
-
-TRAD_SYNOPSIS
-        #include <math.h>
-        double tanh(<[x]>)
-        double <[x]>;
-
-        float tanhf(<[x]>)
-        float <[x]>;
-
-
-DESCRIPTION
-
-<<tanh>> computes the hyperbolic tangent of
-the argument <[x]>.  Angles are specified in radians.
-
-<<tanh(<[x]>)>> is defined as
-. sinh(<[x]>)/cosh(<[x]>)
-
-<<tanhf>> is identical, save that it takes and returns <<float>> values.
-
-RETURNS
-The hyperbolic tangent of <[x]> is returned.
-
-PORTABILITY
-<<tanh>> is ANSI C.  <<tanhf>> is an extension.
-
-*/
-
-/******************************************************************
- * Hyperbolic Tangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic tangent of x
- *
- * Description:
- *   This routine calculates hyperbolic tangent.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#ifndef _DOUBLE_IS_32BITS
-
-static const double LN3_OVER2 = 0.54930614433405484570;
-static const double p[] = { -0.16134119023996228053e+4,
-                            -0.99225929672236083313e+2,
-                            -0.96437492777225469787 };
-static const double q[] = { 0.48402357071988688686e+4,
-                            0.22337720718962312926e+4,
-                            0.11274474380534949335e+3 }; 
-
-double
-_DEFUN (tanh, (double),
-        double x)
-{
-  double f, res, g, P, Q, R;
-
-  f = fabs (x);
-
-  /* Check if the input is too big. */ 
-  if (f > BIGX)
-    res = 1.0; 
-
-  else if (f > LN3_OVER2)
-    res = 1.0 - 2.0 / (exp (2 * f) + 1.0);
-
-  /* Check if the input is too small. */
-  else if (f < z_rooteps)
-    res = f;
-
-  /* Calculate the Taylor series. */
-  else
-    {
-      g = f * f;
-
-      P = (p[2] * g + p[1]) * g + p[0];
-      Q = ((g + q[2]) * g + q[1]) * g + q[0];
-      R = g * (P / Q);
-
-      res = f + f * R;
-    }
-
-  if (x < 0.0)
-    res = -res;
-
-  return (res);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/s_tgamma.c b/newlib/libm/mathfp/s_tgamma.c
deleted file mode 100644
index 4caf27089..000000000
--- a/newlib/libm/mathfp/s_tgamma.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* @(#)w_gamma.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-/* double gamma(double x)
- * Return  the logarithm of the Gamma function of x or the Gamma function of x,
- * depending on the library mode.
- */
-
-#include <math.h>
-#include <errno.h>
-
-#ifdef __STDC__
-	double tgamma(double x)
-#else
-	double tgamma(x)
-	double x;
-#endif
-{
-        double y;
-	int local_signgam;
-	y = gamma_r(x,&local_signgam);
-	if (local_signgam < 0) y = -y;
-#ifdef _IEEE_LIBM
-	return y;
-#else
-	if(_LIB_VERSION == _IEEE_) return y;
-
-	if(!finite(y)&&finite(x)) {
-	  if(floor(x)==x&&x<=0.0)
-            {
-              /* tgamma pole */
-              errno = EDOM;
-              return HUGE_VAL;
-            }
-	  else
-            {
-              /* tgamma overflow */
-              errno = ERANGE;
-              return HUGE_VAL;
-            }
-	}
-	return y;
-#endif
-}
diff --git a/newlib/libm/mathfp/sf_acos.c b/newlib/libm/mathfp/sf_acos.c
deleted file mode 100644
index 6bef98041..000000000
--- a/newlib/libm/mathfp/sf_acos.c
+++ /dev/null
@@ -1,33 +0,0 @@
-
-/* @(#)z_acosf.c 1.0 98/08/13 */
-/******************************************************************
- * Arccosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arccosine of x
- *
- * Description:
- *   This routine returns the arccosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (acosf, (float),
-        float x)
-{
-  return (asinef (x, 1));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double acos (double x)
-{
-  return (double) asinef ((float) x, 1);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_asin.c b/newlib/libm/mathfp/sf_asin.c
deleted file mode 100644
index 92c33fda3..000000000
--- a/newlib/libm/mathfp/sf_asin.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_asinf.c 1.0 98/08/13 */
-/******************************************************************
- * Arcsine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arcsine of x
- *
- * Description:
- *   This routine returns the arcsine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (asinf, (float),
-        float x)
-{
-  return (asinef (x, 0));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double asin (double x)
-{
-  return (double) asinef ((float) x, 0);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_asine.c b/newlib/libm/mathfp/sf_asine.c
deleted file mode 100644
index 12ba28927..000000000
--- a/newlib/libm/mathfp/sf_asine.c
+++ /dev/null
@@ -1,105 +0,0 @@
-
-/* @(#)z_asinef.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Arcsine
- *
- * Input:
- *   x - floating point value
- *   acosine - indicates acos calculation
- *
- * Output:
- *   Arcsine of x.
- *
- * Description:
- *   This routine calculates arcsine / arccosine.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float p[] = { 0.933935835, -0.504400557 };
-static const float q[] = { 0.560363004e+1, -0.554846723e+1 };
-static const float a[] = { 0.0, 0.785398163 };
-static const float b[] = { 1.570796326, 0.785398163 };
-
-float
-_DEFUN (asinef, (float, int),
-        float x _AND
-        int acosine)
-{
-  int flag, i;
-  int branch = 0;
-  float g, res, R, P, Q, y;
-
-  /* Check for special values. */
-  i = numtestf (x);
-  if (i == NAN || i == INF)
-    {
-      errno = EDOM;
-      if (i == NAN)
-        return (x);
-      else
-        return (z_infinity_f.f);
-    }
-
-  y = fabsf (x);
-  flag = acosine;
-
-  if (y > 0.5)
-    {
-      i = 1 - flag;
-
-      /* Check for range error. */
-      if (y > 1.0)
-        {
-          errno = ERANGE;
-          return (z_notanum_f.f);
-        }
-
-      g = (1 - y) / 2.0;
-      y = -2 * sqrt (g);
-      branch = 1;
-    }
-  else
-    {
-      i = flag;
-      if (y < z_rooteps_f)
-        res = y;
-      else
-        g = y * y;
-    }
-
-  if (y >= z_rooteps_f || branch == 1)
-    {
-      /* Calculate the Taylor series. */
-      P = (p[1] * g + p[0]) * g;
-      Q = (g + q[1]) * g + q[0];
-      R = P / Q;
-
-      res = y + y * R;
-    }
-
-  /* Calculate asine or acose. */
-  if (flag == 0)
-    {
-      res = (a[i] + res) + a[i];
-      if (x < 0.0)
-        res = -res;
-    }
-  else
-    {
-      if (x < 0.0)
-        res = (b[i] + res) + b[i];
-      else
-        res = (a[i] - res) + a[i];
-    }
-
-  return (res);
-}
diff --git a/newlib/libm/mathfp/sf_asinh.c b/newlib/libm/mathfp/sf_asinh.c
deleted file mode 100644
index ee07e39f0..000000000
--- a/newlib/libm/mathfp/sf_asinh.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* sf_asinh.c -- float version of s_asinh.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-static const float 
-#else
-static float 
-#endif
-one =  1.0000000000e+00, /* 0x3F800000 */
-ln2 =  6.9314718246e-01, /* 0x3f317218 */
-huge=  1.0000000000e+30; 
-
-#ifdef __STDC__
-	float asinhf(float x)
-#else
-	float asinhf(x)
-	float x;
-#endif
-{	
-	float t,w;
-	__int32_t hx,ix;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) return x+x;	/* x is inf or NaN */
-	if(ix< 0x31800000) {	/* |x|<2**-28 */
-	    if(huge+x>one) return x;	/* return x inexact except 0 */
-	} 
-	if(ix>0x4d800000) {	/* |x| > 2**28 */
-	    w = logf(fabsf(x))+ln2;
-	} else if (ix>0x40000000) {	/* 2**28 > |x| > 2.0 */
-	    t = fabsf(x);
-	    w = logf((float)2.0*t+one/(sqrtf(x*x+one)+t));
-	} else {		/* 2.0 > |x| > 2**-28 */
-	    t = x*x;
-	    w =log1pf(fabsf(x)+t/(one+sqrtf(one+t)));
-	}
-	if(hx>0) return w; else return -w;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double asinh(double x)
-#else
-	double asinh(x)
-	double x;
-#endif
-{
-	return (double) asinhf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_atan.c b/newlib/libm/mathfp/sf_atan.c
deleted file mode 100644
index f0f522076..000000000
--- a/newlib/libm/mathfp/sf_atan.c
+++ /dev/null
@@ -1,45 +0,0 @@
-
-/* @(#)z_atanf.c 1.0 98/08/13 */
-/******************************************************************
- * Arctangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arctan of x
- *
- * Description:
- *   This routine returns the arctan of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (atanf, (float),
-        float x)
-{
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        /* this should check to see if neg NaN or pos NaN... */
-        return (__PI_OVER_TWO);
-      case 0:
-        return (0.0);
-      default:
-        return (atangentf (x, 0, 0, 0));
-    }
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double atan (double x)
-{
-  return (double) atangentf ((float) x, 0, 0, 0);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_atan2.c b/newlib/libm/mathfp/sf_atan2.c
deleted file mode 100644
index 69c612354..000000000
--- a/newlib/libm/mathfp/sf_atan2.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_atan2f.c 1.0 98/08/13 */
-/******************************************************************
- * Arctangent2
- *
- * Input:
- *   v, u - floating point values
- *
- * Output:
- *   arctan2 of v / u 
- *
- * Description:
- *   This routine returns the arctan2 of v / u.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (atan2f, (float, float),
-        float v _AND
-        float u)
-{
-  return (atangentf (0.0, v, u, 1));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double atan2 (double v, double u)
-{
-  return (double) atangentf (0.0, (float) v, (float) u, 1);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_atangent.c b/newlib/libm/mathfp/sf_atangent.c
deleted file mode 100644
index 55a90063c..000000000
--- a/newlib/libm/mathfp/sf_atangent.c
+++ /dev/null
@@ -1,140 +0,0 @@
-
-/* @(#)z_atangentf.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Arctangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   arctangent of x
- *
- * Description:
- *   This routine calculates arctangents.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float ROOT3 = 1.732050807;
-static const float a[] = { 0.0, 0.523598775, 1.570796326,
-                     1.047197551 };
-static const float q[] = { 0.1412500740e+1 };
-static const float p[] = { -0.4708325141, -0.5090958253e-1 };
-
-float
-_DEFUN (atangentf, (float, float, float, int),
-        float x _AND
-        float v _AND
-        float u _AND
-        int arctan2)
-{
-  float f, g, R, P, Q, A, res;
-  int N;
-  int branch = 0;
-  int expv, expu;
-
-  /* Preparation for calculating arctan2. */
-  if (arctan2)
-    {
-      if (u == 0.0)
-        if (v == 0.0)
-          {
-            errno = ERANGE;
-            return (z_notanum_f.f);
-          }
-        else
-          {
-            branch = 1;
-            res = __PI_OVER_TWO;
-          }
-
-      if (!branch)
-        {
-          int e;
-          /* Get the exponent values of the inputs. */
-          g = frexpf (v, &expv);
-          g = frexpf (u, &expu);
-
-          /* See if a divide will overflow. */
-          e = expv - expu;
-          if (e > FLT_MAX_EXP)
-            {
-               branch = 1;
-               res = __PI_OVER_TWO;
-            }
-
-          /* Also check for underflow. */
-          else if (e < FLT_MIN_EXP)
-            {
-               branch = 2;
-               res = 0.0;
-            }
-         }
-    }
-
-  if (!branch)
-    {
-      if (arctan2)
-        f = fabsf (v / u);
-      else
-        f = fabsf (x);
-
-      if (f > 1.0)
-        {
-          f = 1.0 / f;
-          N = 2;
-        }
-      else
-        N = 0;
-
-      if (f > (2.0 - ROOT3))
-        {
-          A = ROOT3 - 1.0;
-          f = (((A * f - 0.5) - 0.5) + f) / (ROOT3 + f);
-          N++;
-        }
-
-      /* Check for values that are too small. */
-      if (-z_rooteps_f < f && f < z_rooteps_f)
-        res = f;
-
-      /* Calculate the Taylor series. */
-      else
-        {
-          g = f * f;
-          P = (p[1] * g + p[0]) * g;
-          Q = g + q[0];
-          R = P / Q;
-
-          res = f + f * R;
-        }
-
-      if (N > 1)
-        res = -res;
-
-      res += a[N];
-    }
-
-  if (arctan2)
-    {
-      if (u < 0.0 || branch == 2)
-        res = __PI - res;
-      if (v < 0.0 || branch == 1)
-        res = -res;
-    }
-  else if (x < 0.0)
-    {
-      res = -res;
-    }
-
-  return (res);
-}
diff --git a/newlib/libm/mathfp/sf_ceil.c b/newlib/libm/mathfp/sf_ceil.c
deleted file mode 100644
index bc8e1403b..000000000
--- a/newlib/libm/mathfp/sf_ceil.c
+++ /dev/null
@@ -1,42 +0,0 @@
-
-/* @(#)z_ceilf.c 1.0 98/08/13 */
-/*****************************************************************
- * ceil
- *
- * Input:
- *   x  - floating point value
- *
- * Output:
- *   Smallest integer greater than x.
- *
- * Description:
- *   This routine returns the smallest integer greater than x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (ceilf, (float),
-        float x)
-{
-  float f, y;
-
-  y = modff (x, &f);
-
-  if (y == 0.0)
-    return (x);
-  else if (x > -1.0 && x < 1.0)
-    return (x > 0 ? 1.0 : 0.0);
-  else
-    return (x > 0 ? f + 1.0 : f);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double ceil (double x)
-{
-  return (double) ceilf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_cos.c b/newlib/libm/mathfp/sf_cos.c
deleted file mode 100644
index 057663e69..000000000
--- a/newlib/libm/mathfp/sf_cos.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_cosf.c 1.0 98/08/13 */
-/******************************************************************
- * Cosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   cosine of x
- *
- * Description:
- *   This routine returns the cosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (cosf, (float),
-        float x)
-{
-  return (sinef (x, 1));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double cos (double x)
-{
-  return (double) sinef ((float) x, 1);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_cosh.c b/newlib/libm/mathfp/sf_cosh.c
deleted file mode 100644
index 4635b7144..000000000
--- a/newlib/libm/mathfp/sf_cosh.c
+++ /dev/null
@@ -1,33 +0,0 @@
-
-/* @(#)z_coshf.c 1.0 98/08/13 */
-/******************************************************************
- * Hyperbolic Cosine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic cosine of x
- *
- * Description:
- *   This routine returns the hyperbolic cosine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (coshf, (float),
-        float x)
-{
-  return (sinehf (x, 1));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double cosh (double x)
-{
-  return (double) sinehf ((float) x, 1);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_erf.c b/newlib/libm/mathfp/sf_erf.c
deleted file mode 100644
index aa209f65a..000000000
--- a/newlib/libm/mathfp/sf_erf.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* sf_erf.c -- float version of s_erf.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __v810__
-#define const
-#endif
-
-#ifdef __STDC__
-static const float
-#else
-static float
-#endif
-tiny	    = 1e-30,
-half=  5.0000000000e-01, /* 0x3F000000 */
-one =  1.0000000000e+00, /* 0x3F800000 */
-two =  2.0000000000e+00, /* 0x40000000 */
-	/* c = (subfloat)0.84506291151 */
-erx =  8.4506291151e-01, /* 0x3f58560b */
-/*
- * Coefficients for approximation to  erf on [0,0.84375]
- */
-efx =  1.2837916613e-01, /* 0x3e0375d4 */
-efx8=  1.0270333290e+00, /* 0x3f8375d4 */
-pp0  =  1.2837916613e-01, /* 0x3e0375d4 */
-pp1  = -3.2504209876e-01, /* 0xbea66beb */
-pp2  = -2.8481749818e-02, /* 0xbce9528f */
-pp3  = -5.7702702470e-03, /* 0xbbbd1489 */
-pp4  = -2.3763017452e-05, /* 0xb7c756b1 */
-qq1  =  3.9791721106e-01, /* 0x3ecbbbce */
-qq2  =  6.5022252500e-02, /* 0x3d852a63 */
-qq3  =  5.0813062117e-03, /* 0x3ba68116 */
-qq4  =  1.3249473704e-04, /* 0x390aee49 */
-qq5  = -3.9602282413e-06, /* 0xb684e21a */
-/*
- * Coefficients for approximation to  erf  in [0.84375,1.25] 
- */
-pa0  = -2.3621185683e-03, /* 0xbb1acdc6 */
-pa1  =  4.1485610604e-01, /* 0x3ed46805 */
-pa2  = -3.7220788002e-01, /* 0xbebe9208 */
-pa3  =  3.1834661961e-01, /* 0x3ea2fe54 */
-pa4  = -1.1089469492e-01, /* 0xbde31cc2 */
-pa5  =  3.5478305072e-02, /* 0x3d1151b3 */
-pa6  = -2.1663755178e-03, /* 0xbb0df9c0 */
-qa1  =  1.0642088205e-01, /* 0x3dd9f331 */
-qa2  =  5.4039794207e-01, /* 0x3f0a5785 */
-qa3  =  7.1828655899e-02, /* 0x3d931ae7 */
-qa4  =  1.2617121637e-01, /* 0x3e013307 */
-qa5  =  1.3637083583e-02, /* 0x3c5f6e13 */
-qa6  =  1.1984500103e-02, /* 0x3c445aa3 */
-/*
- * Coefficients for approximation to  erfc in [1.25,1/0.35]
- */
-ra0  = -9.8649440333e-03, /* 0xbc21a093 */
-ra1  = -6.9385856390e-01, /* 0xbf31a0b7 */
-ra2  = -1.0558626175e+01, /* 0xc128f022 */
-ra3  = -6.2375331879e+01, /* 0xc2798057 */
-ra4  = -1.6239666748e+02, /* 0xc322658c */
-ra5  = -1.8460508728e+02, /* 0xc3389ae7 */
-ra6  = -8.1287437439e+01, /* 0xc2a2932b */
-ra7  = -9.8143291473e+00, /* 0xc11d077e */
-sa1  =  1.9651271820e+01, /* 0x419d35ce */
-sa2  =  1.3765776062e+02, /* 0x4309a863 */
-sa3  =  4.3456588745e+02, /* 0x43d9486f */
-sa4  =  6.4538726807e+02, /* 0x442158c9 */
-sa5  =  4.2900814819e+02, /* 0x43d6810b */
-sa6  =  1.0863500214e+02, /* 0x42d9451f */
-sa7  =  6.5702495575e+00, /* 0x40d23f7c */
-sa8  = -6.0424413532e-02, /* 0xbd777f97 */
-/*
- * Coefficients for approximation to  erfc in [1/.35,28]
- */
-rb0  = -9.8649431020e-03, /* 0xbc21a092 */
-rb1  = -7.9928326607e-01, /* 0xbf4c9dd4 */
-rb2  = -1.7757955551e+01, /* 0xc18e104b */
-rb3  = -1.6063638306e+02, /* 0xc320a2ea */
-rb4  = -6.3756646729e+02, /* 0xc41f6441 */
-rb5  = -1.0250950928e+03, /* 0xc480230b */
-rb6  = -4.8351919556e+02, /* 0xc3f1c275 */
-sb1  =  3.0338060379e+01, /* 0x41f2b459 */
-sb2  =  3.2579251099e+02, /* 0x43a2e571 */
-sb3  =  1.5367296143e+03, /* 0x44c01759 */
-sb4  =  3.1998581543e+03, /* 0x4547fdbb */
-sb5  =  2.5530502930e+03, /* 0x451f90ce */
-sb6  =  4.7452853394e+02, /* 0x43ed43a7 */
-sb7  = -2.2440952301e+01; /* 0xc1b38712 */
-
-#ifdef __STDC__
-	float erff(float x) 
-#else
-	float erff(x) 
-	float x;
-#endif
-{
-	__int32_t hx,ix,i;
-	float R,S,P,Q,s,y,z,r;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) {		/* erf(nan)=nan */
-	    i = ((__uint32_t)hx>>31)<<1;
-	    return (float)(1-i)+one/x;	/* erf(+-inf)=+-1 */
-	}
-
-	if(ix < 0x3f580000) {		/* |x|<0.84375 */
-	    if(ix < 0x31800000) { 	/* |x|<2**-28 */
-	        if (ix < 0x04000000) 
-		    /*avoid underflow */
-		    return (float)0.125*((float)8.0*x+efx8*x);
-		return x + efx*x;
-	    }
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    return x + x*y;
-	}
-	if(ix < 0x3fa00000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabsf(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) return erx + P/Q; else return -erx - P/Q;
-	}
-	if (ix >= 0x40c00000) {		/* inf>|x|>=6 */
-	    if(hx>=0) return one-tiny; else return tiny-one;
-	}
-	x = fabsf(x);
- 	s = one/(x*x);
-	if(ix< 0x4036DB6E) {	/* |x| < 1/0.35 */
-	    R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	    S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	} else {	/* |x| >= 1/0.35 */
-	    R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	    S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	}
-	GET_FLOAT_WORD(ix,x);
-	SET_FLOAT_WORD(z,ix&0xfffff000);
-	r  =  expf(-z*z-(float)0.5625)*expf((z-x)*(z+x)+R/S);
-	if(hx>=0) return one-r/x; else return  r/x-one;
-}
-
-#ifdef __STDC__
-	float erfcf(float x) 
-#else
-	float erfcf(x) 
-	float x;
-#endif
-{
-	__int32_t hx,ix;
-	float R,S,P,Q,s,y,z,r;
-	GET_FLOAT_WORD(hx,x);
-	ix = hx&0x7fffffff;
-	if(ix>=0x7f800000) {			/* erfc(nan)=nan */
-						/* erfc(+-inf)=0,2 */
-	    return (float)(((__uint32_t)hx>>31)<<1)+one/x;
-	}
-
-	if(ix < 0x3f580000) {		/* |x|<0.84375 */
-	    if(ix < 0x23800000)  	/* |x|<2**-56 */
-		return one-x;
-	    z = x*x;
-	    r = pp0+z*(pp1+z*(pp2+z*(pp3+z*pp4)));
-	    s = one+z*(qq1+z*(qq2+z*(qq3+z*(qq4+z*qq5))));
-	    y = r/s;
-	    if(hx < 0x3e800000) {  	/* x<1/4 */
-		return one-(x+x*y);
-	    } else {
-		r = x*y;
-		r += (x-half);
-	        return half - r ;
-	    }
-	}
-	if(ix < 0x3fa00000) {		/* 0.84375 <= |x| < 1.25 */
-	    s = fabsf(x)-one;
-	    P = pa0+s*(pa1+s*(pa2+s*(pa3+s*(pa4+s*(pa5+s*pa6)))));
-	    Q = one+s*(qa1+s*(qa2+s*(qa3+s*(qa4+s*(qa5+s*qa6)))));
-	    if(hx>=0) {
-	        z  = one-erx; return z - P/Q; 
-	    } else {
-		z = erx+P/Q; return one+z;
-	    }
-	}
-	if (ix < 0x41e00000) {		/* |x|<28 */
-	    x = fabsf(x);
- 	    s = one/(x*x);
-	    if(ix< 0x4036DB6D) {	/* |x| < 1/.35 ~ 2.857143*/
-	        R=ra0+s*(ra1+s*(ra2+s*(ra3+s*(ra4+s*(
-				ra5+s*(ra6+s*ra7))))));
-	        S=one+s*(sa1+s*(sa2+s*(sa3+s*(sa4+s*(
-				sa5+s*(sa6+s*(sa7+s*sa8)))))));
-	    } else {			/* |x| >= 1/.35 ~ 2.857143 */
-		if(hx<0&&ix>=0x40c00000) return two-tiny;/* x < -6 */
-	        R=rb0+s*(rb1+s*(rb2+s*(rb3+s*(rb4+s*(
-				rb5+s*rb6)))));
-	        S=one+s*(sb1+s*(sb2+s*(sb3+s*(sb4+s*(
-				sb5+s*(sb6+s*sb7))))));
-	    }
-	    GET_FLOAT_WORD(ix,x);
-	    SET_FLOAT_WORD(z,ix&0xfffff000);
-	    r  =  expf(-z*z-(float)0.5625)*
-			expf((z-x)*(z+x)+R/S);
-	    if(hx>0) return r/x; else return two-r/x;
-	} else {
-	    if(hx>0) return tiny*tiny; else return two-tiny;
-	}
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double erf(double x)
-#else
-	double erf(x)
-	double x;
-#endif
-{
-	return (double) erff((float) x);
-}
-
-#ifdef __STDC__
-	double erfc(double x)
-#else
-	double erfc(x)
-	double x;
-#endif
-{
-	return (double) erfcf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_exp.c b/newlib/libm/mathfp/sf_exp.c
deleted file mode 100644
index e37fac58b..000000000
--- a/newlib/libm/mathfp/sf_exp.c
+++ /dev/null
@@ -1,92 +0,0 @@
-
-/* @(#)z_expf.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Exponential Function
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   e raised to x.
- *
- * Description:
- *   This routine returns e raised to the xth power.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float INV_LN2 = 1.442695040;
-static const float LN2 = 0.693147180;
-static const float p[] = { 0.249999999950, 0.00416028863 };
-static const float q[] = { 0.5, 0.04998717878 };
-
-float
-_DEFUN (expf, (float),
-        float x)
-{
-  int N;
-  float g, z, R, P, Q;
-
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        if (isposf (x))
-          return (z_infinity_f.f);
-        else
-          return (0.0);
-      case 0:
-        return (1.0);
-    }
-
-  /* Check for out of bounds. */
-  if (x > BIGX || x < SMALLX)
-    {
-      errno = ERANGE;
-      return (x);
-    }
-
-  /* Check for a value too small to calculate. */
-  if (-z_rooteps_f < x && x < z_rooteps_f)
-    {
-      return (1.0);
-    }
-
-  /* Calculate the exponent. */
-  if (x < 0.0)
-    N = (int) (x * INV_LN2 - 0.5);
-  else
-    N = (int) (x * INV_LN2 + 0.5);
-
-  /* Construct the mantissa. */
-  g = x - N * LN2;
-  z = g * g;
-  P = g * (p[1] * z + p[0]);
-  Q = q[1] * z + q[0];
-  R = 0.5 + P / (Q - P);
-
-  /* Return the floating point value. */
-  N++;
-  return (ldexpf (R, N));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double exp (double x)
-{
-  return (double) expf ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/sf_exp2.c b/newlib/libm/mathfp/sf_exp2.c
deleted file mode 100644
index 7e147c5ed..000000000
--- a/newlib/libm/mathfp/sf_exp2.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright (C) 2002 by  Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include "fdlibm.h"
-
-float
-_DEFUN (exp2f, (float),
-        float x)
-{
-  return powf(2.0, x);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double exp2 (double x)
-{
-  return (double) exp2f ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/sf_fabs.c b/newlib/libm/mathfp/sf_fabs.c
deleted file mode 100644
index 2661eabc0..000000000
--- a/newlib/libm/mathfp/sf_fabs.c
+++ /dev/null
@@ -1,45 +0,0 @@
-
-/* @(#)z_fabsf.c 1.0 98/08/13 */
-/******************************************************************
- * Floating-Point Absolute Value
- *
- * Input:
- *   x - floating-point number
- *
- * Output:
- *   absolute value of x
- *
- * Description:
- *   fabs computes the absolute value of a floating point number.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (fabsf, (float),
-        float x)
-{
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        return (x);
-      case 0:
-        return (0.0);
-      default:
-        return (x < 0.0 ? -x : x);
-    }
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double fabs (double x)
-{
-  return (double) fabsf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_floor.c b/newlib/libm/mathfp/sf_floor.c
deleted file mode 100644
index 1e0fb9e44..000000000
--- a/newlib/libm/mathfp/sf_floor.c
+++ /dev/null
@@ -1,43 +0,0 @@
-
-/* @(#)z_floorf.c 1.0 98/08/13 */
-/*****************************************************************
- * floor 
- *
- * Input:
- *   x  - floating point value
- *
- * Output:
- *   Smallest integer less than x.
- *
- * Description:
- *   This routine returns the smallest integer less than x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (floorf, (float),
-        float x)
-{
-  float f, y;
-
-  if (x > -1.0 && x < 1.0)
-    return (x >= 0 ? 0 : -1.0);
-
-  y = modff (x, &f);
-
-  if (y == 0.0)
-    return (x);
-
-  return (x >= 0 ? f : f - 1.0);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-double floor (double x)
-{
-  return (double) floorf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_fmod.c b/newlib/libm/mathfp/sf_fmod.c
deleted file mode 100644
index 0ac86bbef..000000000
--- a/newlib/libm/mathfp/sf_fmod.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* ef_fmod.c -- float version of e_fmod.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/* 
- * fmodf(x,y)
- * Return x mod y in exact arithmetic
- * Method: shift and subtract
- */
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float one = 1.0, Zero[] = {0.0, -0.0,};
-
-float
-_DEFUN (fmodf, (float, float),
-        float x _AND
-        float y)
-{
-	__int32_t n,hx,hy,hz,ix,iy,sx,i;
-
-	GET_FLOAT_WORD(hx,x);
-	GET_FLOAT_WORD(hy,y);
-	sx = hx&0x80000000;		/* sign of x */
-	hx ^=sx;		/* |x| */
-	hy &= 0x7fffffff;	/* |y| */
-
-    /* purge off exception values */
-	if(hy==0||(hx>=0x7f800000)||		/* y=0,or x not finite */
-	   (hy>0x7f800000))			/* or y is NaN */
-	    return (x*y)/(x*y);
-	if(hx<hy) return x;			/* |x|<|y| return x */
-	if(hx==hy)
-	    return Zero[(__uint32_t)sx>>31];	/* |x|=|y| return x*0*/
-
-    /* determine ix = ilogb(x) */
-	if(hx<0x00800000) {	/* subnormal x */
-	    for (ix = -126,i=(hx<<8); i>0; i<<=1) ix -=1;
-	} else ix = (hx>>23)-127;
-
-    /* determine iy = ilogb(y) */
-	if(hy<0x00800000) {	/* subnormal y */
-	    for (iy = -126,i=(hy<<8); i>=0; i<<=1) iy -=1;
-	} else iy = (hy>>23)-127;
-
-    /* set up {hx,lx}, {hy,ly} and align y to x */
-	if(ix >= -126) 
-	    hx = 0x00800000|(0x007fffff&hx);
-	else {		/* subnormal x, shift x to normal */
-	    n = -126-ix;
-	    hx = hx<<n;
-	}
-	if(iy >= -126) 
-	    hy = 0x00800000|(0x007fffff&hy);
-	else {		/* subnormal y, shift y to normal */
-	    n = -126-iy;
-	    hy = hy<<n;
-	}
-
-    /* fix point fmod */
-	n = ix - iy;
-	while(n--) {
-	    hz=hx-hy;
-	    if(hz<0){hx = hx+hx;}
-	    else {
-	    	if(hz==0) 		/* return sign(x)*0 */
-		    return Zero[(__uint32_t)sx>>31];
-	    	hx = hz+hz;
-	    }
-	}
-	hz=hx-hy;
-	if(hz>=0) {hx=hz;}
-
-    /* convert back to floating value and restore the sign */
-	if(hx==0) 			/* return sign(x)*0 */
-	    return Zero[(__uint32_t)sx>>31];	
-	while(hx<0x00800000) {		/* normalize x */
-	    hx = hx+hx;
-	    iy -= 1;
-	}
-	if(iy>= -126) {		/* normalize output */
-	    hx = ((hx-0x00800000)|((iy+127)<<23));
-	    SET_FLOAT_WORD(x,hx|sx);
-	} else {		/* subnormal output */
-	    n = -126 - iy;
-	    hx >>= n;
-	    SET_FLOAT_WORD(x,hx|sx);
-	    x *= one;		/* create necessary signal */
-	}
-	return x;		/* exact output */
-}
diff --git a/newlib/libm/mathfp/sf_frexp.c b/newlib/libm/mathfp/sf_frexp.c
deleted file mode 100644
index c2751f65c..000000000
--- a/newlib/libm/mathfp/sf_frexp.c
+++ /dev/null
@@ -1,58 +0,0 @@
-
-/* @(#)z_frexpf.c 1.0 98/08/13 */
-/******************************************************************
- * frexp
- *
- * Input:
- *   d   - floating point value
- *   exp - exponent value
- *
- * Output:
- *   A floating point value in the range [0.5, 1).
- *
- * Description:
- *   This routine breaks a floating point value into a number f and
- *   an exponent exp such that d = f * 2 ^ exp.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float frexpf (float d, int *exp)
-{
-  float f;
-  __int32_t wf, wd;
-
-  GET_FLOAT_WORD (wd, d);
-
-  /* Get the exponent. */
-  *exp = ((wd & 0x7f800000) >> 23) - 126;
-
-  /* Get the mantissa. */ 
-  wf = wd & 0x7fffff;  
-  wf |= 0x3f000000;
-
-  SET_FLOAT_WORD (f, wf);
-
-  /* Check for special values. */
-  switch (numtestf (f))
-    {
-      case NAN:
-      case INF:
-        errno = EDOM;
-        *exp = 0;
-        return (f);
-    }
-
-  return (f);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double frexp (double x, int *exp)
-{
-  return (double) frexpf ((float) x, exp);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_isinf.c b/newlib/libm/mathfp/sf_isinf.c
deleted file mode 100644
index 84ab3f71c..000000000
--- a/newlib/libm/mathfp/sf_isinf.c
+++ /dev/null
@@ -1,48 +0,0 @@
-
-/* @(#)z_isinff.c 1.0 98/08/13 */
-/******************************************************************
- * isinff
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates if the number is infinite.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is infinite (1) or is finite (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-int 
-_DEFUN (isinff, (float),
-	float x)
-{
-  __uint32_t wx;
-  int exp;
-
-  GET_FLOAT_WORD (wx, x);
-  exp = (wx & 0x7f800000) >> 23;
-
-  if ((exp == 0x7f8) && !(wx & 0xf0000))
-    return (1);
-  else
-    return (0);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-int
-_DEFUN (isinf, (double),
-        double x)
-{
-  return isinff ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
-
diff --git a/newlib/libm/mathfp/sf_isnan.c b/newlib/libm/mathfp/sf_isnan.c
deleted file mode 100644
index ac557a6b8..000000000
--- a/newlib/libm/mathfp/sf_isnan.c
+++ /dev/null
@@ -1,48 +0,0 @@
-
-/* @(#)z_isnanf.c 1.0 98/08/13 */
-/******************************************************************
- * isnanf
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates if the number is NaN.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is NaN (1) or is finite (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-int
-_DEFUN (isnanf, (float),
-        float x)
-{
-  __int32_t wx;
-  int exp;
-
-  GET_FLOAT_WORD (wx, x);
-  exp = (wx & 0x7f800000) >> 23;
-
-  if ((exp == 0x7f8) && (wx & 0x7fffff))
-    return (1);
-  else
-    return (0);
-}
-
-
-#ifdef _DOUBLE_IS_32BITS
-
-int
-_DEFUN (isnan, (double),
-        double x)
-{
-  return isnanf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
-
diff --git a/newlib/libm/mathfp/sf_ispos.c b/newlib/libm/mathfp/sf_ispos.c
deleted file mode 100644
index 1b91f399f..000000000
--- a/newlib/libm/mathfp/sf_ispos.c
+++ /dev/null
@@ -1,40 +0,0 @@
-
-/* @(#)z_isposf.c 1.0 98/08/13 */
-/******************************************************************
- * Positive value test
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   An integer that indicates if the number is positive.
- *
- * Description:
- *   This routine returns an integer that indicates if the number
- *   passed in is positive (1) or negative (0).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-int isposf (float x)
-{
-  __int32_t wx;
-
-  GET_FLOAT_WORD (wx, x);
-
-  if (wx & 0x80000000)
-    return (0);
-  else
-    return (1);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-int ispos (double x)
-{
-  return isposf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_ldexp.c b/newlib/libm/mathfp/sf_ldexp.c
deleted file mode 100644
index 6b6c2c00b..000000000
--- a/newlib/libm/mathfp/sf_ldexp.c
+++ /dev/null
@@ -1,81 +0,0 @@
-
-/* @(#)z_ldexpf.c 1.0 98/08/13 */
-/******************************************************************
- * ldexp
- *
- * Input:
- *   d - a floating point value
- *   e - an exponent value
- *
- * Output:
- *   A floating point value f such that f = d * 2 ^ e.
- *
- * Description:
- *   This function creates a floating point number f such that
- *   f = d * 2 ^ e.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-#define FLOAT_EXP_OFFS 127
-
-float
-_DEFUN (ldexpf, (float, int),
-        float d _AND
-        int e)
-{
-  int exp;
-  __int32_t wd;
-
-  GET_FLOAT_WORD (wd, d);
-
-  /* Check for special values and then scale d by e. */
-  switch (numtestf (wd))
-    {
-      case NAN:
-        errno = EDOM;
-        break;
-
-      case INF:
-        errno = ERANGE;
-        break;
-
-      case 0:
-        break;
-
-      default:
-        exp = (wd & 0x7f800000) >> 23;
-        exp += e;
-
-        if (exp > FLT_MAX_EXP + FLOAT_EXP_OFFS)
-         {
-           errno = ERANGE;
-           d = z_infinity_f.f;
-         }
-        else if (exp < FLT_MIN_EXP + FLOAT_EXP_OFFS)
-         {
-           errno = ERANGE;
-           d = -z_infinity_f.f;
-         }
-        else
-         {
-           wd &= 0x807fffff;
-           wd |= exp << 23;
-           SET_FLOAT_WORD (d, wd);
-         }
-    }
-
-    return (d);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double ldexp (double x, int e)
-{
-  return (double) ldexpf ((float) x, e);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_log.c b/newlib/libm/mathfp/sf_log.c
deleted file mode 100644
index b746d444f..000000000
--- a/newlib/libm/mathfp/sf_log.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_logf.c 1.0 98/08/13 */
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   natural logarithm of x
- *
- * Description:
- *   This routine returns the natural logarithm of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (logf, (float),
-        float x)
-{
-  return (logarithmf (x, 0));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double log (double x)
-{
-  return (double) logf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_log10.c b/newlib/libm/mathfp/sf_log10.c
deleted file mode 100644
index 444e535e0..000000000
--- a/newlib/libm/mathfp/sf_log10.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_log10f.c 1.0 98/08/13 */
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   logarithm of x
- *
- * Description:
- *   This routine returns the logarithm of x (base 10).
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (log10f, (float),
-        float x)
-{
-  return (logarithmf (x, 1));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double log10 (double x)
-{
-  return (double) log10f ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_logarithm.c b/newlib/libm/mathfp/sf_logarithm.c
deleted file mode 100644
index 224482f13..000000000
--- a/newlib/libm/mathfp/sf_logarithm.c
+++ /dev/null
@@ -1,72 +0,0 @@
-
-/* @(#)z_logarithmf.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Logarithm
- *
- * Input:
- *   x - floating point value
- *   ten - indicates base ten numbers
- *
- * Output:
- *   logarithm of x
- *
- * Description:
- *   This routine calculates logarithms.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float a[] = { -0.5527074855 };
-static const float b[] = { -0.6632718214e+1 };
-static const float C1 = 0.693145752;
-static const float C2 = 1.428606820e-06;
-static const float C3 = 0.4342944819;
-
-float
-_DEFUN (logarithmf, (float, int),
-        float x _AND
-        int ten)
-{
-  int N;
-  float f, w, z;
-
-  /* Check for domain error here. */
-  if (x <= 0.0)
-    {
-      errno = ERANGE;
-      return (z_notanum_f.f);
-    }
-
-  /* Get the exponent and mantissa where x = f * 2^N. */
-  f = frexpf (x, &N);
-
-  z = f - 0.5;
-
-  if (f > __SQRT_HALF)
-    z = (z - 0.5) / (f * 0.5 + 0.5);
-  else
-    {
-      N--;
-      z /= (z * 0.5 + 0.5);
-    }
-  w = z * z;
-
-  /* Use Newton's method with 4 terms. */
-  z += z * w * (a[0]) / ((w + 1.0) * w + b[0]);
-
-  if (N != 0)
-    z = (N * C2 + z) + N * C1;
-
-  if (ten)
-    z *= C3;
-
-  return (z);
-}
diff --git a/newlib/libm/mathfp/sf_numtest.c b/newlib/libm/mathfp/sf_numtest.c
deleted file mode 100644
index 675086c41..000000000
--- a/newlib/libm/mathfp/sf_numtest.c
+++ /dev/null
@@ -1,63 +0,0 @@
-
-/* @(#)z_numtestf.c 1.0 98/08/13 */
-/******************************************************************
- * Numtest
- *
- * Input:
- *   x - pointer to a floating point value
- *
- * Output:
- *   An integer that indicates what kind of number was passed in:
- *     NUM = 3 - a finite value
- *     NAN = 2 - not a number
- *     INF = 1 - an infinite value
- *           0 - zero
- *
- * Description:
- *   This routine returns an integer that indicates the character-
- *   istics of the number that was passed in. 
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-int 
-_DEFUN (numtestf, (float),
-        float x)
-{
-  __int32_t wx;
-  int exp;
-
-  GET_FLOAT_WORD (wx, x);
-
-  exp = (wx & 0x7f800000) >> 23;
-
-  /* Check for a zero input. */
-  if (x == 0.0)
-    {
-      return (0);
-    }
-
-  /* Check for not a number or infinity. */
-  if (exp == 0x7f8)
-    {
-      if(wx & 0x7fffff)
-        return (NAN);
-      else
-        return (INF);
-    }
-     
-  /* Otherwise it's a finite value. */ 
-  else
-    return (NUM);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-int numtest (double x)
-{
-  return numtestf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_pow.c b/newlib/libm/mathfp/sf_pow.c
deleted file mode 100644
index 932e75dbb..000000000
--- a/newlib/libm/mathfp/sf_pow.c
+++ /dev/null
@@ -1,124 +0,0 @@
-
-/* @(#)z_powf.c 1.0 98/08/13 */
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-float powf (float x, float y)
-{
-  float d, k, t, r = 1.0;
-  int n, sign, exponent_is_even_int = 0;
-  __int32_t px;
-
-  GET_FLOAT_WORD (px, x);
-
-  k = modff (y, &d);
-
-  if (k == 0.0) 
-    {
-      /* Exponent y is an integer. */
-      if (modff (ldexpf (y, -1), &t))
-        {
-          /* y is odd. */
-          exponent_is_even_int = 0;
-        }
-      else
-        {
-          /* y is even. */
-          exponent_is_even_int = 1;
-        }
-    }
-
-  if (x == 0.0 && y <= 0.0)
-    {
-      errno = EDOM;
-    }
-  else if ((t = y * log (fabsf (x))) >= BIGX) 
-    {
-      errno = ERANGE;
-      if (px & 0x80000000) 
-        {
-          /* x is negative. */
-          if (k) 
-            {
-              /* y is not an integer. */
-              errno = EDOM;
-              x = 0.0;
-            }
-          else if (exponent_is_even_int)
-            x = z_infinity_f.f;
-          else
-            x = -z_infinity_f.f;
-        }
-    else
-      {
-        x = z_infinity_f.f;
-      }
-    }
-  else if (t < SMALLX)
-    {
-      errno = ERANGE;
-      x = 0.0;
-    }
-  else 
-    {
-      if ( !k && fabsf (d) <= 32767 ) 
-        {
-          n = (int) d;
-
-          if ((sign = (n < 0)))
-            n = -n;
-
-          while ( n > 0 ) 
-            {
-              if ((unsigned int) n % 2) 
-                r *= x;
-              x *= x;
-              n = (unsigned int) n / 2;
-            }
-
-          if (sign)
-            r = 1.0 / r;
-
-          return r;
-        }
-      else 
-        {
-          if ( px & 0x80000000 ) 
-            {
-              /* x is negative. */
-              if (k) 
-                {
-                  /* y is not an integer. */
-                  errno = EDOM;
-                  return 0.0;
-                }
-            }
-
-          x = exp (t);
-
-          if (!exponent_is_even_int) 
-            { 
-              if (px & 0x80000000)
-                {
-                  /* y is an odd integer, and x is negative,
-                     so the result is negative. */
-                  GET_FLOAT_WORD (px, x);
-                  px |= 0x80000000;
-                  SET_FLOAT_WORD (x, px);
-                }
-            }
-        }
-    }
-
-  return x;
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double pow (double x, double y)
-{
-  return (double) powf ((float) x, (float) y);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */ 
diff --git a/newlib/libm/mathfp/sf_signif.c b/newlib/libm/mathfp/sf_signif.c
deleted file mode 100644
index 35427f947..000000000
--- a/newlib/libm/mathfp/sf_signif.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* sf_signif.c -- float version of s_signif.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-
-#ifdef __STDC__
-	float significandf(float x)
-#else
-	float significandf(x)
-	float x;
-#endif
-{
-	return scalbf(x,(float) -ilogbf(x));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double significand(double x)
-#else
-	double significand(x)
-	double x;
-#endif
-{
-	return (double) significandf((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_sin.c b/newlib/libm/mathfp/sf_sin.c
deleted file mode 100644
index c68e18e50..000000000
--- a/newlib/libm/mathfp/sf_sin.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_sinf.c 1.0 98/08/13 */
-/******************************************************************
- * Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   sine of x
- *
- * Description:
- *   This routine returns the sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (sinf, (float),
-        float x)
-{
-  return (sinef (x, 0));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double sin (double x)
-{
-  return (double) sinef ((float) x, 0);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_sincos.c b/newlib/libm/mathfp/sf_sincos.c
deleted file mode 100644
index e192b4b44..000000000
--- a/newlib/libm/mathfp/sf_sincos.c
+++ /dev/null
@@ -1,39 +0,0 @@
-
-/* @(#)z_sinf.c 1.0 98/08/13 */
-/******************************************************************
- * Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   sine of x
- *
- * Description:
- *   This routine returns the sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-void
-_DEFUN (sincosf, (x, sinx, cosx),
-        float x _AND
-        float *sinx _AND
-        float *cosx)
-{
-  *sinx = sin (x);
-  *cosx = cos (x);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-void
-sincos (double x, double *sinx, double *cosx)
-{
-  *sinx = (double) sinf ((float) x);
-  *cosx = (double) cosf ((float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/sf_sine.c b/newlib/libm/mathfp/sf_sine.c
deleted file mode 100644
index 6932de26c..000000000
--- a/newlib/libm/mathfp/sf_sine.c
+++ /dev/null
@@ -1,112 +0,0 @@
-
-/* @(#)z_sinef.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * sine generator
- *
- * Input:
- *   x - floating point value
- *   cosine - indicates cosine value
- *
- * Output:
- *   Sine of x.
- *
- * Description:
- *   This routine calculates sines and cosines.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float HALF_PI = 1.570796326;
-static const float ONE_OVER_PI = 0.318309886;
-static const float r[] = { -0.1666665668,
-                            0.8333025139e-02,
-                           -0.1980741872e-03,
-                            0.2601903036e-5 };
-
-float
-_DEFUN (sinef, (float, int),
-        float x _AND
-        int cosine)
-{
-  int sgn, N;
-  float y, XN, g, R, res;
-  float YMAX = 210828714.0;
-
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = EDOM;
-        return (z_notanum_f.f); 
-    }
-
-  /* Use sin and cos properties to ease computations. */
-  if (cosine)
-    {
-      sgn = 1;
-      y = fabsf (x) + HALF_PI;
-    }
-  else
-    {
-      if (x < 0.0)
-        {
-          sgn = -1;
-          y = -x;
-        }
-      else
-        {
-          sgn = 1;
-          y = x;
-        }
-    }
-
-  /* Check for values of y that will overflow here. */
-  if (y > YMAX)
-    {
-      errno = ERANGE;
-      return (x);
-    }
-
-  /* Calculate the exponent. */
-  if (y < 0.0)
-    N = (int) (y * ONE_OVER_PI - 0.5);
-  else
-    N = (int) (y * ONE_OVER_PI + 0.5);
-  XN = (float) N;
-
-  if (N & 1)
-    sgn = -sgn;
-
-  if (cosine)
-    XN -= 0.5;
-
-  y = fabsf (x) - XN * __PI;
-
-  if (-z_rooteps_f < y && y < z_rooteps_f)
-    res = y;
-
-  else
-    {
-      g = y * y;
-
-      /* Calculate the Taylor series. */
-      R = (((r[3] * g + r[2]) * g + r[1]) * g + r[0]) * g;
-
-      /* Finally, compute the result. */
-      res = y + y * R;
-    }
- 
-  res *= sgn;
-
-  return (res);
-}
diff --git a/newlib/libm/mathfp/sf_sineh.c b/newlib/libm/mathfp/sf_sineh.c
deleted file mode 100644
index 4eee2c927..000000000
--- a/newlib/libm/mathfp/sf_sineh.c
+++ /dev/null
@@ -1,110 +0,0 @@
-
-/* @(#)z_sinehf.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Hyperbolic Sine 
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic sine of x
- *
- * Description:
- *   This routine calculates hyperbolic sines.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float q[] = { -0.428277109e+2 };
-static const float p[] = { -0.713793159e+1,
-                           -0.190333399 };
-static const float LNV = 0.6931610107;
-static const float INV_V2 = 0.2499930850;
-static const float V_OVER2_MINUS1 = 0.1383027787e-4;
-
-float
-_DEFUN (sinehf, (float, int),
-        float x _AND
-        int cosineh)
-{
-  float y, f, P, Q, R, res, z, w;
-  int sgn = 1;
-  float WBAR = 18.55;
-
-  /* Check for special values. */
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = ERANGE;
-        return (ispos (x) ? z_infinity_f.f : -z_infinity_f.f);
-    }
-
-  y = fabs (x);
-
-  if (!cosineh && x < 0.0)
-    sgn = -1;
-
-  if ((y > 1.0 && !cosineh) || cosineh)
-    {
-      if (y > BIGX)
-        {
-          w = y - LNV;
-          
-          /* Check for w > maximum here. */
-          if (w > BIGX)
-            {
-              errno = ERANGE;
-              return (x);
-            }
-
-          z = exp (w);
-
-          if (w > WBAR)
-            res = z * (V_OVER2_MINUS1 + 1.0);
-        }
-
-      else
-        {
-          z = exp (y);
-          if (cosineh)
-            res = (z + 1 / z) / 2.0;
-          else
-            res = (z - 1 / z) / 2.0;
-        }
-
-      if (sgn < 0)
-        res = -res;
-    }
-  else
-    {
-      /* Check for y being too small. */
-      if (y < z_rooteps_f)
-        {
-          res = x;
-        }
-      /* Calculate the Taylor series. */
-      else
-        { 
-          f = x * x;
-          Q = f + q[0];
-          P = p[1] * f + p[0];
-          R = f * (P / Q); 
-
-          res = x + x * R;
-        }
-    }
-
-  return (res);
-}
diff --git a/newlib/libm/mathfp/sf_sinh.c b/newlib/libm/mathfp/sf_sinh.c
deleted file mode 100644
index a50e56606..000000000
--- a/newlib/libm/mathfp/sf_sinh.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-/* @(#)z_sinhf.c 1.0 98/08/13 */
-/******************************************************************
- * Hyperbolic Sine
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic sine of x
- *
- * Description:
- *   This routine returns the hyperbolic sine of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (sinhf, (float),
-        float x)
-{
-  return (sinehf (x, 0));
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double sinh (double x)
-{
-  return (double) sinhf ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/sf_sqrt.c b/newlib/libm/mathfp/sf_sqrt.c
deleted file mode 100644
index 5d5410dce..000000000
--- a/newlib/libm/mathfp/sf_sqrt.c
+++ /dev/null
@@ -1,100 +0,0 @@
-
-/* @(#)z_sqrtf.c 1.0 98/08/13 */
-/*****************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- *****************************************************************/
-/******************************************************************
- * Square Root
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   square-root of x
- *
- * Description:
- *   This routine performs floating point square root.
- *
- *   The initial approximation is computed as
- *     y0 = 0.41731 + 0.59016 * f
- *   where f is a fraction such that x = f * 2^exp.
- *
- *   Three Newton iterations in the form of Heron's formula
- *   are then performed to obtain the final value:
- *     y[i] = (y[i-1] + f / y[i-1]) / 2, i = 1, 2, 3.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-float
-_DEFUN (sqrtf, (float),
-        float x)
-{
-  float f, y;
-  int exp, i, odd;
-
-  /* Check for special values. */
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        if (isposf (x))
-          {
-            errno = EDOM;
-            return (z_notanum_f.f);
-          }
-        else
-          {
-            errno = ERANGE;
-            return (z_infinity_f.f);
-          }
-    } 
-
-  /* Initial checks are performed here. */
-  if (x == 0.0)
-    return (0.0);
-  if (x < 0)
-    {
-      errno = EDOM;
-      return (z_notanum_f.f);
-    }
-
-  /* Find the exponent and mantissa for the form x = f * 2^exp. */
-  f = frexpf (x, &exp);
-  odd = exp & 1;
-
-  /* Get the initial approximation. */
-  y = 0.41731 + 0.59016 * f;
-
-  f *= 0.5;
-  /* Calculate the remaining iterations. */
-  for (i = 0; i < 2; ++i)
-    y = y * 0.5 + f / y;
-
-  /* Calculate the final value. */
-  if (odd)
-    {
-      y *= __SQRT_HALF;
-      exp++;
-    }
-  exp >>= 1;
-  y = ldexpf (y, exp);
-
-  return (y);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double sqrt (double x)
-{
-  return (double) sqrtf ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/sf_tan.c b/newlib/libm/mathfp/sf_tan.c
deleted file mode 100644
index fcde19ab3..000000000
--- a/newlib/libm/mathfp/sf_tan.c
+++ /dev/null
@@ -1,104 +0,0 @@
-
-/* @(#)z_tanf.c 1.0 98/08/13 */
-/******************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- ******************************************************************/
-/******************************************************************
- * Tangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   tangent of x
- *
- * Description:
- *   This routine calculates the tangent of x.
- *
- *****************************************************************/
-
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float TWO_OVER_PI = 0.6366197723;
-static const float p[] = { -0.958017723e-1 };
-static const float q[] = { -0.429135777,
-                            0.971685835e-2 };
-
-float
-_DEFUN (tanf, (float),
-        float x)
-{
-  float y, f, g, XN, xnum, xden, res;
-  int N;
-
-  /* Check for special values. */
-  switch (numtestf (x))
-    {
-      case NAN:
-        errno = EDOM;
-        return (x);
-      case INF:
-        errno = EDOM;
-        return (z_notanum_f.f);
-    }
-
-  y = fabsf (x);
-
-  /* Check for values that are out of our range. */
-  if (y > 105414357.0)
-    {
-      errno = ERANGE;
-      return (y);
-    }
-
-  if (x < 0.0)
-    N = (int) (x * TWO_OVER_PI - 0.5);
-  else
-    N = (int) (x * TWO_OVER_PI + 0.5);
-
-  XN = (float) N;
-
-  f = x - N * __PI_OVER_TWO;
-
-  /* Check for values that are too small. */
-  if (-z_rooteps_f < f && f < z_rooteps_f)
-    {
-      xnum = f;
-      xden = 1.0;
-    }
-
-  /* Calculate the polynomial. */ 
-  else
-    { 
-      g = f * f;
-
-      xnum = f * (p[0] * g) + f;
-      xden = (q[1] * g + q[0]) * g + 1.0;
-    }
-
-  /* Check for odd or even values. */
-  if (N & 1)
-    {
-      xnum = -xnum;
-      res = xden / xnum;
-    } 
-  else
-    {
-      res = xnum / xden;
-    }
-
-  return (res);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double tan (double x)
-{
-  return (double) tanf ((float) x);
-}
-
-#endif /* _DOUBLE_IS_32BITS */
diff --git a/newlib/libm/mathfp/sf_tanh.c b/newlib/libm/mathfp/sf_tanh.c
deleted file mode 100644
index 51806af45..000000000
--- a/newlib/libm/mathfp/sf_tanh.c
+++ /dev/null
@@ -1,77 +0,0 @@
-
-/* @(#)z_tanhf.c 1.0 98/08/13 */
-/*****************************************************************
- * The following routines are coded directly from the algorithms
- * and coefficients given in "Software Manual for the Elementary
- * Functions" by William J. Cody, Jr. and William Waite, Prentice
- * Hall, 1980.
- *****************************************************************/
-/******************************************************************
- * Hyperbolic Tangent
- *
- * Input:
- *   x - floating point value
- *
- * Output:
- *   hyperbolic tangent of x
- *
- * Description:
- *   This routine calculates hyperbolic tangent.
- *
- *****************************************************************/
-
-#include <float.h>
-#include "fdlibm.h"
-#include "zmath.h"
-
-static const float LN3_OVER2 = 0.5493061443;
-static const float p[] = { -0.2059432032,
-                           -0.0009577527 };
-static const float q[] = {  0.6178299136,
-                            0.25 };
-
-float
-_DEFUN (tanhf, (float),
-        float x)
-{
-  float f, res, g, P, Q, R;
-
-  f = fabsf (x);
-
-  /* Check if the input is too big. */ 
-  if (f > BIGX)
-    res = 1.0; 
-
-  else if (f > LN3_OVER2)
-    res = 1.0 - 2.0 / (exp (2 * f) + 1.0);
-
-  /* Check if the input is too small. */
-  else if (f < z_rooteps_f)
-    res = f;
-
-  /* Calculate the Taylor series. */
-  else
-    {
-      g = f * f;
-
-      P = p[1] * g + p[0];
-      Q = (g + q[1]) * g + q[0];
-      R = g * (P / Q);
-
-      res = f + f * R;
-    }
-
-  if (x < 0.0)
-    res = -res;
-
-  return (res);
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-double tanh (double x)
-{
-  return (double) tanhf ((float) x);
-}
-
-#endif _DOUBLE_IS_32BITS
diff --git a/newlib/libm/mathfp/sf_tgamma.c b/newlib/libm/mathfp/sf_tgamma.c
deleted file mode 100644
index f4d145634..000000000
--- a/newlib/libm/mathfp/sf_tgamma.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* w_gammaf.c -- float version of w_gamma.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice
- * is preserved.
- * ====================================================
- */
-
-#include <math.h>
-#include <errno.h>
-
-#ifdef __STDC__
-	float tgammaf(float x)
-#else
-	float tgammaf(x)
-	float x;
-#endif
-{
-        float y;
-	int local_signgam;
-	y = gammaf_r(x,&local_signgam);
-	if (local_signgam < 0) y = -y;
-#ifdef _IEEE_LIBM
-	return y;
-#else
-	if(_LIB_VERSION == _IEEE_) return y;
-
-	if(!finitef(y)&&finitef(x)) {
-	  if(floorf(x)==x&&x<=(float)0.0)
-            {
-              /* tgammaf pole */
-              errno = EDOM;
-              return HUGE_VAL;
-            }
-	  else
-            {
-              /* tgammaf overflow */
-              errno = ERANGE;
-              return HUGE_VAL;
-            }
-	}
-	return y;
-#endif
-}
diff --git a/newlib/libm/mathfp/w_cabs.c b/newlib/libm/mathfp/w_cabs.c
deleted file mode 100644
index bef76680c..000000000
--- a/newlib/libm/mathfp/w_cabs.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * cabs() wrapper for hypot().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-struct complex {
-	double x;
-	double y;
-};
-
-double
-cabs(z)
-	struct complex z;
-{
-	return hypot(z.x, z.y);
-}
diff --git a/newlib/libm/mathfp/w_drem.c b/newlib/libm/mathfp/w_drem.c
deleted file mode 100644
index d289bdaac..000000000
--- a/newlib/libm/mathfp/w_drem.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * drem() wrapper for remainder().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-double
-drem(x, y)
-	double x, y;
-{
-	return remainder(x, y);
-}
diff --git a/newlib/libm/mathfp/w_jn.c b/newlib/libm/mathfp/w_jn.c
deleted file mode 100644
index bd7878104..000000000
--- a/newlib/libm/mathfp/w_jn.c
+++ /dev/null
@@ -1,248 +0,0 @@
-
-/* @(#)w_jn.c 5.1 93/09/24 */
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-/*
-FUNCTION
-<<jN>>,<<jNf>>,<<yN>>,<<yNf>>---Bessel functions
-
-INDEX
-j0
-INDEX
-j0f
-INDEX
-j1
-INDEX
-j1f
-INDEX
-jn
-INDEX
-jnf
-INDEX
-y0
-INDEX
-y0f
-INDEX
-y1
-INDEX
-y1f
-INDEX
-yn
-INDEX
-ynf
-
-ANSI_SYNOPSIS
-#include <math.h>
-double j0(double <[x]>);
-float j0f(float <[x]>);
-double j1(double <[x]>);
-float j1f(float <[x]>);
-double jn(int <[n]>, double <[x]>);
-float jnf(int <[n]>, float <[x]>);
-double y0(double <[x]>);
-float y0f(float <[x]>);
-double y1(double <[x]>);
-float y1f(float <[x]>);
-double yn(int <[n]>, double <[x]>);
-float ynf(int <[n]>, float <[x]>);
-
-TRAD_SYNOPSIS
-#include <math.h>
-
-double j0(<[x]>)
-double <[x]>;
-float j0f(<[x]>)
-float <[x]>;
-double j1(<[x]>)
-double <[x]>;
-float j1f(<[x]>)
-float <[x]>;
-double jn(<[n]>, <[x]>)
-int <[n]>;
-double <[x]>;
-float jnf(<[n]>, <[x]>)
-int <[n]>;
-float <[x]>;
-
-double y0(<[x]>)
-double <[x]>;
-float y0f(<[x]>)
-float <[x]>;
-double y1(<[x]>)
-double <[x]>;
-float y1f(<[x]>)
-float <[x]>;
-double yn(<[n]>, <[x]>)
-int <[n]>;
-double <[x]>;
-float ynf(<[n]>, <[x]>)
-int <[n]>;
-float <[x]>;
-
-DESCRIPTION
-The Bessel functions are a family of functions that solve the
-differential equation
-@ifnottex
-.  2               2    2
-. x  y'' + xy' + (x  - p )y  = 0
-@end ifnottex
-@tex
-$$x^2{d^2y\over dx^2} + x{dy\over dx} + (x^2-p^2)y = 0$$
-@end tex
-These functions have many applications in engineering and physics.
-
-<<jn>> calculates the Bessel function of the first kind of order
-<[n]>.  <<j0>> and <<j1>> are special cases for order 0 and order
-1 respectively.
-
-Similarly, <<yn>> calculates the Bessel function of the second kind of
-order <[n]>, and <<y0>> and <<y1>> are special cases for order 0 and
-1.
-
-<<jnf>>, <<j0f>>, <<j1f>>, <<ynf>>, <<y0f>>, and <<y1f>> perform the
-same calculations, but on <<float>> rather than <<double>> values.
-
-RETURNS
-The value of each Bessel function at <[x]> is returned.
-
-PORTABILITY
-None of the Bessel functions are in ANSI C.
-*/
-
-/*
- * wrapper jn(int n, double x), yn(int n, double x)
- * floating point Bessel's function of the 1st and 2nd kind
- * of order n
- *          
- * Special cases:
- *	y0(0)=y1(0)=yn(n,0) = -inf with division by zero signal;
- *	y0(-ve)=y1(-ve)=yn(n,-ve) are NaN with invalid signal.
- * Note 2. About jn(n,x), yn(n,x)
- *	For n=0, j0(x) is called,
- *	for n=1, j1(x) is called,
- *	for n<x, forward recursion us used starting
- *	from values of j0(x) and j1(x).
- *	for n>x, a continued fraction approximation to
- *	j(n,x)/j(n-1,x) is evaluated and then backward
- *	recursion is used starting from a supposed value
- *	for j(n,x). The resulting value of j(0,x) is
- *	compared with the actual value to correct the
- *	supposed value of j(n,x).
- *
- *	yn(n,x) is similar in all respects, except
- *	that forward recursion is used for all
- *	values of n>1.
- *	
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-#ifndef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double jn(int n, double x)	/* wrapper jn */
-#else
-	double jn(n,x)			/* wrapper jn */
-	double x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return jn(n,x);
-#else
-	double z;
-	struct exception exc;
-	z = jn(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-	if(fabs(x)>X_TLOSS) {
-	    /* jn(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "jn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	double yn(int n, double x)	/* wrapper yn */
-#else
-	double yn(n,x)			/* wrapper yn */
-	double x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return yn(n,x);
-#else
-	double z;
-	struct exception exc;
-	z = yn(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnan(x) ) return z;
-        if(x <= 0.0){
-	    /* yn(n,0) = -inf or yn(x<0) = NaN */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "yn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-	    if (_LIB_VERSION == _SVID_)
-	        exc.retval = -HUGE;
-	    else
-	        exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = EDOM;
-	    else if (!matherr(&exc)) {
-	        errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-        }
-	if(x>X_TLOSS) {
-	    /* yn(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "yn";
-	    exc.err = 0;
-	    exc.arg1 = n;
-	    exc.arg2 = x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/wf_cabs.c b/newlib/libm/mathfp/wf_cabs.c
deleted file mode 100644
index c3ed0caa2..000000000
--- a/newlib/libm/mathfp/wf_cabs.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * cabsf() wrapper for hypotf().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-struct complex {
-	float x;
-	float y;
-};
-
-float
-cabsf(z)
-	struct complex z;
-{
-	return hypotf(z.x, z.y);
-}
diff --git a/newlib/libm/mathfp/wf_drem.c b/newlib/libm/mathfp/wf_drem.c
deleted file mode 100644
index 7c3f7c58e..000000000
--- a/newlib/libm/mathfp/wf_drem.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * dremf() wrapper for remainderf().
- * 
- * Written by J.T. Conklin, <jtc@wimsey.com>
- * Placed into the Public Domain, 1994.
- */
-
-#include "fdlibm.h"
-
-float
-#ifdef __STDC__
-dremf(float x, float y)
-#else
-dremf(x, y)
-	float x, y;
-#endif
-{
-	return remainderf(x, y);
-}
diff --git a/newlib/libm/mathfp/wf_jn.c b/newlib/libm/mathfp/wf_jn.c
deleted file mode 100644
index ebc886de9..000000000
--- a/newlib/libm/mathfp/wf_jn.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/* wf_jn.c -- float version of w_jn.c.
- * Conversion to float by Ian Lance Taylor, Cygnus Support, ian@cygnus.com.
- */
-
-/*
- * ====================================================
- * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
- *
- * Developed at SunPro, a Sun Microsystems, Inc. business.
- * Permission to use, copy, modify, and distribute this
- * software is freely granted, provided that this notice 
- * is preserved.
- * ====================================================
- */
-
-#include "fdlibm.h"
-#include <errno.h>
-
-
-#ifdef __STDC__
-	float jnf(int n, float x)	/* wrapper jnf */
-#else
-	float jnf(n,x)			/* wrapper jnf */
-	float x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return jnf(n,x);
-#else
-	float z;
-	struct exception exc;
-	z = jnf(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-	if(fabsf(x)>(float)X_TLOSS) {
-	    /* jnf(|x|>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "jnf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-               errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef __STDC__
-	float ynf(int n, float x)	/* wrapper ynf */
-#else
-	float ynf(n,x)			/* wrapper ynf */
-	float x; int n;
-#endif
-{
-#ifdef _IEEE_LIBM
-	return ynf(n,x);
-#else
-	float z;
-	struct exception exc;
-	z = ynf(n,x);
-	if(_LIB_VERSION == _IEEE_ || isnanf(x) ) return z;
-        if(x <= (float)0.0){
-	    /* ynf(n,0) = -inf or ynf(x<0) = NaN */
-#ifndef HUGE_VAL 
-#define HUGE_VAL inf
-	    double inf = 0.0;
-
-	    SET_HIGH_WORD(inf,0x7ff00000);	/* set inf to infinite */
-#endif
-	    exc.type = DOMAIN;	/* should be SING for IEEE */
-	    exc.name = "ynf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-	    if (_LIB_VERSION == _SVID_)
-	        exc.retval = -HUGE;
-	    else
-	        exc.retval = -HUGE_VAL;
-	    if (_LIB_VERSION == _POSIX_)
-	        errno = EDOM;
-	    else if (!matherr(&exc)) {
-	        errno = EDOM;
-	    }
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-        }
-	if(x>(float)X_TLOSS) {
-	    /* ynf(x>X_TLOSS) */
-            exc.type = TLOSS;
-            exc.name = "ynf";
-	    exc.err = 0;
-	    exc.arg1 = (double)n;
-	    exc.arg2 = (double)x;
-            exc.retval = 0.0;
-            if (_LIB_VERSION == _POSIX_)
-                errno = ERANGE;
-            else if (!matherr(&exc)) {
-                errno = ERANGE;
-            }        
-	    if (exc.err != 0)
-	       errno = exc.err;
-            return (float)exc.retval; 
-	} else
-	    return z;
-#endif
-}
-
-#ifdef _DOUBLE_IS_32BITS
-
-#ifdef __STDC__
-	double jn(int n, double x)
-#else
-	double jn(n,x)
-	double x; int n;
-#endif
-{
-	return (double) jnf(n, (float) x);
-}
-
-#ifdef __STDC__
-	double yn(int n, double x)
-#else
-	double yn(n,x)
-	double x; int n;
-#endif
-{
-	return (double) ynf(n, (float) x);
-}
-
-#endif /* defined(_DOUBLE_IS_32BITS) */
diff --git a/newlib/libm/mathfp/zmath.h b/newlib/libm/mathfp/zmath.h
deleted file mode 100644
index 369bfec49..000000000
--- a/newlib/libm/mathfp/zmath.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef __ZMATH_H
-#define __ZMATH_H
-
-#include <errno.h>
-
-#define NUM 3
-#define NAN 2
-#define INF 1
-
-#define __PI 3.14159265358979323846
-#define __SQRT_HALF 0.70710678118654752440
-#define __PI_OVER_TWO 1.57079632679489661923132
-
-extern double BIGX;
-extern double SMALLX;
-
-typedef const union
-{
-  long l[2];
-  double d;
-} udouble;
-
-typedef const union
-{
-  long l;
-  float f;
-} ufloat;
-
-extern double BIGX;
-extern double SMALLX;
-
-extern udouble z_infinity;
-extern udouble z_notanum;
-extern double  z_rooteps;
-
-extern ufloat  z_infinity_f;
-extern ufloat  z_notanum_f;
-extern float   z_rooteps_f;
-
-/* Core math routines. */
-
-int    _EXFUN (numtest, (double));
-int    _EXFUN (numtestf, (float));
-double _EXFUN (logarithm, (double, int));
-float  _EXFUN (logarithmf, (float, int));
-double _EXFUN (sine, (double, int));
-float  _EXFUN (sinef, (float, int));
-double _EXFUN (asine, (double, int));
-float  _EXFUN (asinef, (float, int));
-double _EXFUN (atangent, (double, double, double, int));
-float  _EXFUN (atangentf, (float, float, float, int));
-double _EXFUN (sineh, (double, int));
-float  _EXFUN (sinehf, (float, int));
-
-#endif /* no __ZMATH_H */
diff --git a/newlib/libm/test/Makefile.in b/newlib/libm/test/Makefile.in
deleted file mode 100644
index 1f086fc68..000000000
--- a/newlib/libm/test/Makefile.in
+++ /dev/null
@@ -1,202 +0,0 @@
-# Makefile for newlib/libm/test.
-# Copyright (c) 1994, 2002 Red Hat Incorporated.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# 
-#    Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 
-#    Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 
-#    The name of Red Hat Incorporated may not be used to endorse
-#    or promote products derived from this software without specific
-#    prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-TOP=..
-SRCTOP=..
-
-#### Host, target, and site specific Makefile fragments come in here.
-###
-
-
-OFILES=test.o  string.o  convert.o conv_vec.o iconv_vec.o test_is.o dvec.o sprint_vec.o sprint_ivec.o math2.o test_ieee.o
-
-VEC_OFILES=\
-	math.o \
-	atan2_vec.o \
-	atan2f_vec.o \
-	jn_vec.o \
-	jnf_vec.o \
-	log2_vec.o \
-	log2f_vec.o \
-	yn_vec.o \
-	ynf_vec.o \
-	acos_vec.o	\
-	acosf_vec.o	\
-	acosh_vec.o	\
-	acoshf_vec.o	\
-	asin_vec.o	\
-	asinf_vec.o	\
-	asinh_vec.o	\
-	asinhf_vec.o	\
-	atan_vec.o	\
-	atanf_vec.o	\
-	atanh_vec.o	\
-	atanhf_vec.o	\
-	ceil_vec.o	\
-	ceilf_vec.o	\
-	cos_vec.o	\
-	cosf_vec.o	\
-	cosh_vec.o	\
-	coshf_vec.o	\
-	erf_vec.o	\
-	erfc_vec.o	\
-	erfcf_vec.o	\
-	erff_vec.o	\
-	exp_vec.o	\
-	expf_vec.o	\
-	fabs_vec.o	\
-	fabsf_vec.o	\
-	floor_vec.o	\
-	floorf_vec.o	\
-	gamma_vec.o	\
-	gammaf_vec.o	\
-	j0_vec.o	\
-	j0f_vec.o	\
-	j1_vec.o	\
-	j1f_vec.o	\
-	log10_vec.o	\
-	log10f_vec.o	\
-	log1p_vec.o	\
-	log1pf_vec.o	\
-	log_vec.o	\
-	logf_vec.o	\
-	sin_vec.o	\
-	sinf_vec.o	\
-	sinh_vec.o	\
-	sinhf_vec.o	\
-	sqrt_vec.o	\
-	sqrtf_vec.o	\
-	tan_vec.o	\
-	tanf_vec.o	\
-	tanh_vec.o	\
-	tanhf_vec.o	\
-	y0_vec.o	\
-	y0f_vec.o	\
-	y1_vec.o	\
-	y1f_vec.o	\
-	hypotf_vec.o	\
-	hypot_vec.o	\
-	fmod_vec.o	\
-	fmodf_vec.o	
-
-
-all:$(OFILES)  $(VEC_OFILES)
-	$(CROSS_LD) -o test ../../crt0.o $(OFILES) $(VEC_OFILES) ../../libc.a ../../libm.a
-
-
-clean mostlyclean:
-	$(RM) $(OFILES) $(VEC_OFILES) *~
-
-distclean maintainer-clean realclean: clean
-	rm -f Makefile config.status
-
-
-Makefile:Makefile.in
-	$(SHELL) config.status
-
-# to support SunOS VPATH
-acos_vec.o: acos_vec.c
-acosf_vec.o: acosf_vec.c
-acosh_vec.o: acosh_vec.c
-acoshf_vec.o: acoshf_vec.c
-asin_vec.o: asin_vec.c
-asinf_vec.o: asinf_vec.c
-asinh_vec.o: asinh_vec.c
-asinhf_vec.o: asinhf_vec.c
-atan2_vec.o: atan2_vec.c
-atan2f_vec.o: atan2f_vec.c
-atan_vec.o: atan_vec.c
-atanf_vec.o: atanf_vec.c
-atanh_vec.o: atanh_vec.c
-atanhf_vec.o: atanhf_vec.c
-ceil_vec.o: ceil_vec.c
-ceilf_vec.o: ceilf_vec.c
-conv_vec.o: conv_vec.c
-convert.o: convert.c
-cos_vec.o: cos_vec.c
-cosf_vec.o: cosf_vec.c
-cosh_vec.o: cosh_vec.c
-coshf_vec.o: coshf_vec.c
-dcvt.o: dcvt.c
-dvec.o: dvec.c
-erf_vec.o: erf_vec.c
-erfc_vec.o: erfc_vec.c
-erfcf_vec.o: erfcf_vec.c
-erff_vec.o: erff_vec.c
-exp_vec.o: exp_vec.c
-expf_vec.o: expf_vec.c
-fabs_vec.o: fabs_vec.c
-fabsf_vec.o: fabsf_vec.c
-floor_vec.o: floor_vec.c
-floorf_vec.o: floorf_vec.c
-fmod_vec.o: fmod_vec.c
-fmodf_vec.o: fmodf_vec.c
-gamma_vec.o: gamma_vec.c
-gammaf_vec.o: gammaf_vec.c
-hypot_vec.o: hypot_vec.c
-hypotf_vec.o: hypotf_vec.c
-iconv_vec.o: iconv_vec.c
-j0_vec.o: j0_vec.c
-j0f_vec.o: j0f_vec.c
-j1_vec.o: j1_vec.c
-j1f_vec.o: j1f_vec.c
-jn_vec.o: jn_vec.c
-jnf_vec.o: jnf_vec.c
-log10_vec.o: log10_vec.c
-log10f_vec.o: log10f_vec.c
-log1p_vec.o: log1p_vec.c
-log1pf_vec.o: log1pf_vec.c
-log2_vec.o: log2_vec.c
-log2f_vec.o: log2f_vec.c
-log_vec.o: log_vec.c
-logf_vec.o: logf_vec.c
-math.o: math.c
-math2.o: math2.c
-sin_vec.o: sin_vec.c
-sinf_vec.o: sinf_vec.c
-sinh_vec.o: sinh_vec.c
-sinhf_vec.o: sinhf_vec.c
-sprint_ivec.o: sprint_ivec.c
-sprint_vec.o: sprint_vec.c
-sqrt_vec.o: sqrt_vec.c
-sqrtf_vec.o: sqrtf_vec.c
-string.o: string.c
-tan_vec.o: tan_vec.c
-tanf_vec.o: tanf_vec.c
-tanh_vec.o: tanh_vec.c
-tanhf_vec.o: tanhf_vec.c
-test.o: test.c
-test_ieee.o: test_ieee.c
-test_is.o: test_is.c
-y0_vec.o: y0_vec.c
-y0f_vec.o: y0f_vec.c
-y1_vec.o: y1_vec.c
-y1f_vec.o: y1f_vec.c
-yn_vec.o: yn_vec.c
-ynf_vec.o: ynf_vec.c
diff --git a/newlib/libm/test/acos_vec.c b/newlib/libm/test/acos_vec.c
deleted file mode 100644
index 4288b7b82..000000000
--- a/newlib/libm/test/acos_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type acos_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x5170194b, 0xbfefffff, 0xfffffffe},			/* 3.14159=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x4008001b, 0xe1bc0117, 0xbfefae14, 0x7ae147ac},			/* 3.00005=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x400787b2, 0x2ce3f58d, 0xbfef5c28, 0xf5c28f5a},			/* 2.94125=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x40072b10, 0x466e25ee, 0xbfef0a3d, 0x70a3d708},			/* 2.89602=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x4006dcc5, 0x7bb565fa, 0xbfeeb851, 0xeb851eb6},			/* 2.85779=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x4006979e, 0x34f1b08f, 0xbfee6666, 0x66666664},			/* 2.82403=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x400658f0, 0x0fec9c13, 0xbfee147a, 0xe147ae12},			/* 2.79342=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x40061f25, 0xfc69b3c5, 0xbfedc28f, 0x5c28f5c0},			/* 2.76520=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x4005e938, 0x3efad0cf, 0xbfed70a3, 0xd70a3d6e},			/* 2.73887=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x4005b66f, 0xc75f8f2e, 0xbfed1eb8, 0x51eb851c},			/* 2.71408=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x40058647, 0x6251e743, 0xbfeccccc, 0xccccccca},			/* 2.69056=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x4005585a, 0x919e47f6, 0xbfec7ae1, 0x47ae1478},			/* 2.66814=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x40052c5b, 0x4e51b553, 0xbfec28f5, 0xc28f5c26},			/* 2.64665=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x4005020b, 0x942d7396, 0xbfebd70a, 0x3d70a3d4},			/* 2.62599=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x4004d939, 0x2170d7e8, 0xbfeb851e, 0xb851eb82},			/* 2.60606=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x4004b1ba, 0x8ff34d12, 0xbfeb3333, 0x33333330},			/* 2.58678=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x40048b6d, 0x4a69943d, 0xbfeae147, 0xae147ade},			/* 2.56808=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x40046634, 0x12ff153e, 0xbfea8f5c, 0x28f5c28c},			/* 2.54990=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x400441f5, 0xecbeef57, 0xbfea3d70, 0xa3d70a3a},			/* 2.53220=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x40041e9d, 0x49ea60f0, 0xbfe9eb85, 0x1eb851e8},			/* 2.51494=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x4003fc17, 0x6b7a855e, 0xbfe99999, 0x99999996},			/* 2.49809=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x4003da53, 0xe4683a05, 0xbfe947ae, 0x147ae144},			/* 2.48160=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x4003b944, 0x37710c9d, 0xbfe8f5c2, 0x8f5c28f2},			/* 2.46546=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x400398db, 0x88c873c7, 0xbfe8a3d7, 0x0a3d70a0},			/* 2.44963=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x4003790e, 0x5efbaf81, 0xbfe851eb, 0x851eb84e},			/* 2.43410=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x400359d2, 0x6f93b6c2, 0xbfe7ffff, 0xfffffffc},			/* 2.41885=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x40033b1e, 0x74e4d7d4, 0xbfe7ae14, 0x7ae147aa},			/* 2.40386=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x40031cea, 0x0b1e9471, 0xbfe75c28, 0xf5c28f58},			/* 2.38911=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x4002ff2d, 0x932437fa, 0xbfe70a3d, 0x70a3d706},			/* 2.37459=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x4002e1e2, 0x1a0d3a1d, 0xbfe6b851, 0xeb851eb4},			/* 2.36029=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x4002c501, 0x446cd5f0, 0xbfe66666, 0x66666662},			/* 2.34619=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x4002a885, 0x3cb097c7, 0xbfe6147a, 0xe147ae10},			/* 2.33228=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x40028c68, 0xa40a5e8a, 0xbfe5c28f, 0x5c28f5be},			/* 2.31855=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x400270a6, 0x857678d4, 0xbfe570a3, 0xd70a3d6c},			/* 2.30500=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x4002553a, 0x4a84548e, 0xbfe51eb8, 0x51eb851a},			/* 2.29161=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x40023a1f, 0xb1993d6b, 0xbfe4cccc, 0xccccccc8},			/* 2.27838=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x40021f52, 0xc5720bd9, 0xbfe47ae1, 0x47ae1476},			/* 2.26529=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x400204cf, 0xd5b34454, 0xbfe428f5, 0xc28f5c24},			/* 2.25235=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x4001ea93, 0x705fa170, 0xbfe3d70a, 0x3d70a3d2},			/* 2.23953=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x4001d09a, 0x5c13d2e9, 0xbfe3851e, 0xb851eb80},			/* 2.22685=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x4001b6e1, 0x92ebbe42, 0xbfe33333, 0x3333332e},			/* 2.21429=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x40019d66, 0x3dfa08c4, 0xbfe2e147, 0xae147adc},			/* 2.20185=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x40018425, 0xb13e5c9f, 0xbfe28f5c, 0x28f5c28a},			/* 2.18952=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x40016b1d, 0x6809deac, 0xbfe23d70, 0xa3d70a38},			/* 2.17730=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x4001524b, 0x01c3c767, 0xbfe1eb85, 0x1eb851e6},			/* 2.16518=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x400139ac, 0x3f022346, 0xbfe19999, 0x99999994},			/* 2.15316=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x4001213e, 0xfeec77b2, 0xbfe147ae, 0x147ae142},			/* 2.14123=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x40010901, 0x3cdf7bcb, 0xbfe0f5c2, 0x8f5c28f0},			/* 2.12939=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x4000f0f1, 0x0e4a4af2, 0xbfe0a3d7, 0x0a3d709e},			/* 2.11764=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x4000d90c, 0xa0be7d98, 0xbfe051eb, 0x851eb84c},			/* 2.10598=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x4000c152, 0x382d7364, 0xbfdfffff, 0xfffffff4},			/* 2.09439=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x4000a9c0, 0x2d4dd6d1, 0xbfdf5c28, 0xf5c28f50},			/* 2.08288=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x40009254, 0xec250417, 0xbfdeb851, 0xeb851eac},			/* 2.07145=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x40007b0e, 0xf2b0873a, 0xbfde147a, 0xe147ae08},			/* 2.06008=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x400063ec, 0xcfac5c06, 0xbfdd70a3, 0xd70a3d64},			/* 2.04879=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x40004ced, 0x21730104, 0xbfdccccc, 0xccccccc0},			/* 2.03756=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x4000360e, 0x94f4c6c4, 0xbfdc28f5, 0xc28f5c1c},			/* 2.02639=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x40001f4f, 0xe4c4118e, 0xbfdb851e, 0xb851eb78},			/* 2.01528=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x400008af, 0xd83485fa, 0xbfdae147, 0xae147ad4},			/* 2.00424=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3fffe45a, 0x8516a5c6, 0xbfda3d70, 0xa3d70a30},			/* 1.99325=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3fffb78e, 0x047dfba1, 0xbfd99999, 0x9999998c},			/* 1.98231=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3fff8af8, 0x008a864f, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.97142=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3fff5e96, 0x5edb849c, 0xbfd851eb, 0x851eb844},			/* 1.96059=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3fff3267, 0x1790a029, 0xbfd7ae14, 0x7ae147a0},			/* 1.94980=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3fff0668, 0x342bcf9e, 0xbfd70a3d, 0x70a3d6fc},			/* 1.93906=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3ffeda97, 0xce869c0d, 0xbfd66666, 0x66666658},			/* 1.92836=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3ffeaef4, 0x0fd91e82, 0xbfd5c28f, 0x5c28f5b4},			/* 1.91771=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3ffe837b, 0x2fd13424, 0xbfd51eb8, 0x51eb8510},			/* 1.90710=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3ffe582b, 0x73b88c73, 0xbfd47ae1, 0x47ae146c},			/* 1.89652=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3ffe2d03, 0x2da855f3, 0xbfd3d70a, 0x3d70a3c8},			/* 1.88598=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3ffe0200, 0xbbc96ad4, 0xbfd33333, 0x33333324},			/* 1.87548=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3ffdd722, 0x879ff961, 0xbfd28f5c, 0x28f5c280},			/* 1.86502=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3ffdac67, 0x0561bb4b, 0xbfd1eb85, 0x1eb851dc},			/* 1.85459=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3ffd81cc, 0xb355e3be, 0xbfd147ae, 0x147ae138},			/* 1.84418=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3ffd5752, 0x193dff00, 0xbfd0a3d7, 0x0a3d7094},			/* 1.83381=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3ffd2cf5, 0xc7c70f07, 0xbfcfffff, 0xffffffe0},			/* 1.82347=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3ffd02b6, 0x58023fbc, 0xbfceb851, 0xeb851e98},			/* 1.81316=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3ffcd892, 0x6ae49ae7, 0xbfcd70a3, 0xd70a3d50},			/* 1.80287=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3ffcae88, 0xa8cd304f, 0xbfcc28f5, 0xc28f5c08},			/* 1.79261=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3ffc8497, 0xc1113153, 0xbfcae147, 0xae147ac0},			/* 1.78237=f(-0.21000)*/
-{60, 0,123,__LINE__, 0x3ffc5abe, 0x698d895c, 0xbfc99999, 0x99999978},			/* 1.77215=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3ffc30fb, 0x5e3d8564, 0xbfc851eb, 0x851eb830},			/* 1.76195=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3ffc074d, 0x60d624f8, 0xbfc70a3d, 0x70a3d6e8},			/* 1.75178=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3ffbddb3, 0x3865b650, 0xbfc5c28f, 0x5c28f5a0},			/* 1.74162=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3ffbb42b, 0xb0f765c6, 0xbfc47ae1, 0x47ae1458},			/* 1.73148=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3ffb8ab5, 0x9b3a6eea, 0xbfc33333, 0x33333310},			/* 1.72136=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3ffb614f, 0xcc2ca2bb, 0xbfc1eb85, 0x1eb851c8},			/* 1.71125=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3ffb37f9, 0x1cc7fb82, 0xbfc0a3d7, 0x0a3d7080},			/* 1.70116=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3ffb0eb0, 0x69b2fb1c, 0xbfbeb851, 0xeb851e71},			/* 1.69108=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3ffae574, 0x92f3947b, 0xbfbc28f5, 0xc28f5be2},			/* 1.68101=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3ffabc44, 0x7ba4649c, 0xbfb99999, 0x99999953},			/* 1.67096=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3ffa931f, 0x09ac0277, 0xbfb70a3d, 0x70a3d6c4},			/* 1.66091=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3ffa6a03, 0x2576302c, 0xbfb47ae1, 0x47ae1435},			/* 1.65088=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x3ffa40ef, 0xb9aeba3c, 0xbfb1eb85, 0x1eb851a6},			/* 1.64085=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3ffa17e3, 0xb2fdd3d9, 0xbfaeb851, 0xeb851e2d},			/* 1.63083=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3ff9eedd, 0xffc5c146, 0xbfa99999, 0x9999990e},			/* 1.62081=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3ff9c5dd, 0x8fe1a2fe, 0xbfa47ae1, 0x47ae13ef},			/* 1.61080=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3ff99ce1, 0x546535b4, 0xbf9eb851, 0xeb851da0},			/* 1.60080=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3ff973e8, 0x3f5d5c96, 0xbf947ae1, 0x47ae1362},			/* 1.59079=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3ff94af1, 0x43914c32, 0xbf847ae1, 0x47ae1249},			/* 1.58079=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x54442d14, 0x3cd19000, 0x00000000},			/* 1.57079=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3ff8f905, 0x64f70df6, 0x3f847ae1, 0x47ae16ad},			/* 1.56079=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3ff8d00e, 0x692afd91, 0x3f947ae1, 0x47ae1594},			/* 1.55079=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3ff8a715, 0x54232474, 0x3f9eb851, 0xeb851fd2},			/* 1.54079=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3ff87e19, 0x18a6b729, 0x3fa47ae1, 0x47ae1508},			/* 1.53078=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3ff85518, 0xa8c298e1, 0x3fa99999, 0x99999a27},			/* 1.52077=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3ff82c12, 0xf58a864e, 0x3faeb851, 0xeb851f46},			/* 1.51076=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3ff80306, 0xeed99feb, 0x3fb1eb85, 0x1eb85232},			/* 1.50073=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3ff7d9f3, 0x831229fb, 0x3fb47ae1, 0x47ae14c1},			/* 1.49071=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3ff7b0d7, 0x9edc57b0, 0x3fb70a3d, 0x70a3d750},			/* 1.48067=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3ff787b2, 0x2ce3f58c, 0x3fb99999, 0x999999df},			/* 1.47062=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3ff75e82, 0x1594c5ac, 0x3fbc28f5, 0xc28f5c6e},			/* 1.46057=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3ff73546, 0x3ed55f0c, 0x3fbeb851, 0xeb851efd},			/* 1.45050=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3ff70bfd, 0x8bc05ea6, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.44042=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3ff6e2a6, 0xdc5bb76c, 0x3fc1eb85, 0x1eb8520e},			/* 1.43033=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3ff6b941, 0x0d4deb3d, 0x3fc33333, 0x33333356},			/* 1.42022=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3ff68fca, 0xf790f461, 0x3fc47ae1, 0x47ae149e},			/* 1.41010=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3ff66643, 0x7022a3d8, 0x3fc5c28f, 0x5c28f5e6},			/* 1.39996=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3ff63ca9, 0x47b2352f, 0x3fc70a3d, 0x70a3d72e},			/* 1.38981=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3ff612fb, 0x4a4ad4c3, 0x3fc851eb, 0x851eb876},			/* 1.37963=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3ff5e938, 0x3efad0cc, 0x3fc99999, 0x999999be},			/* 1.36943=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3ff5bf5e, 0xe77728d4, 0x3fcae147, 0xae147b06},			/* 1.35922=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3ff5956d, 0xffbb29d8, 0x3fcc28f5, 0xc28f5c4e},			/* 1.34898=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3ff56b64, 0x3da3bf40, 0x3fcd70a3, 0xd70a3d96},			/* 1.33871=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3ff54140, 0x50861a6b, 0x3fceb851, 0xeb851ede},			/* 1.32843=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3ff51700, 0xe0c14b20, 0x3fd00000, 0x00000013},			/* 1.31811=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3ff4eca4, 0x8f4a5b28, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.30777=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3ff4c229, 0xf5327668, 0x3fd147ae, 0x147ae15b},			/* 1.29740=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3ff4978f, 0xa3269edc, 0x3fd1eb85, 0x1eb851ff},			/* 1.28700=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3ff46cd4, 0x20e860c6, 0x3fd28f5c, 0x28f5c2a3},			/* 1.27656=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3ff441f5, 0xecbeef53, 0x3fd33333, 0x33333347},			/* 1.26610=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3ff416f3, 0x7ae00434, 0x3fd3d70a, 0x3d70a3eb},			/* 1.25560=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3ff3ebcb, 0x34cfcdb4, 0x3fd47ae1, 0x47ae148f},			/* 1.24506=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3ff3c07b, 0x78b72603, 0x3fd51eb8, 0x51eb8533},			/* 1.23449=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3ff39502, 0x98af3ba4, 0x3fd5c28f, 0x5c28f5d7},			/* 1.22387=f(0.34000)*/
-{62, 0,123,__LINE__, 0x3ff3695e, 0xda01be19, 0x3fd66666, 0x6666667b},			/* 1.21322=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3ff33d8e, 0x745c8a89, 0x3fd70a3d, 0x70a3d71f},			/* 1.20252=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3ff3118f, 0x90f7b9fe, 0x3fd7ae14, 0x7ae147c3},			/* 1.19178=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3ff2e560, 0x49acd58b, 0x3fd851eb, 0x851eb867},			/* 1.18100=f(0.38000)*/
-{ 60, 0,123,__LINE__, 0x3ff2b8fe, 0xa7fdd3d7, 0x3fd8f5c2, 0x8f5c290b},			/* 1.17016=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3ff28c68, 0xa40a5e85, 0x3fd99999, 0x999999af},			/* 1.15927=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3ff25f9c, 0x2371b460, 0x3fda3d70, 0xa3d70a53},			/* 1.14834=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3ff23296, 0xf81f4e32, 0x3fdae147, 0xae147af7},			/* 1.13735=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3ff20556, 0xdf00370a, 0x3fdb851e, 0xb851eb9b},			/* 1.12630=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3ff1d7d9, 0x7e9ecca0, 0x3fdc28f5, 0xc28f5c3f},			/* 1.11519=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3ff1aa1c, 0x65a2581f, 0x3fdccccc, 0xcccccce3},			/* 1.10403=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3ff17c1d, 0x092fa21a, 0x3fdd70a3, 0xd70a3d87},			/* 1.09280=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3ff14dd8, 0xc3274bb2, 0x3fde147a, 0xe147ae2b},			/* 1.08150=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3ff11f4c, 0xd03e51f8, 0x3fdeb851, 0xeb851ecf},			/* 1.07014=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3ff0f076, 0x4decac84, 0x3fdf5c28, 0xf5c28f73},			/* 1.05870=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3ff0c152, 0x382d735f, 0x3fe00000, 0x0000000b},			/* 1.04719=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3ff091dd, 0x670b5ef5, 0x3fe051eb, 0x851eb85d},			/* 1.03561=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3ff06214, 0x8bf3c442, 0x3fe0a3d7, 0x0a3d70af},			/* 1.02394=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3ff031f4, 0x2ec96290, 0x3fe0f5c2, 0x8f5c2901},			/* 1.01219=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3ff00178, 0xaaaf6ac2, 0x3fe147ae, 0x147ae153},			/* 1.00035=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fefa13c, 0x55082733, 0x3fe19999, 0x999999a5},			/* 0.98843=f(0.55000)*/
-{ 59, 0,123,__LINE__, 0x3fef3ec1, 0x4a0196b0, 0x3fe1eb85, 0x1eb851f7},			/* 0.97641=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3feedb77, 0xb0e9399e, 0x3fe23d70, 0xa3d70a49},			/* 0.96429=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fee7756, 0x8c1741d0, 0x3fe28f5c, 0x28f5c29b},			/* 0.95206=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fee1254, 0x5928913d, 0x3fe2e147, 0xae147aed},			/* 0.93973=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fedac67, 0x0561bb41, 0x3fe33333, 0x3333333f},			/* 0.92729=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fed4583, 0xe0c168a7, 0x3fe3851e, 0xb851eb91},			/* 0.91473=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fecdd9f, 0x8f922e89, 0x3fe3d70a, 0x3d70a3e3},			/* 0.90205=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fec74ad, 0xfa43a2fd, 0x3fe428f5, 0xc28f5c35},			/* 0.88924=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fec0aa2, 0x3b4884e6, 0x3fe47ae1, 0x47ae1487},			/* 0.87629=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3feb9f6e, 0x8aabbe9e, 0x3fe4cccc, 0xccccccd9},			/* 0.86321=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3feb3304, 0x26ff6214, 0x3fe51eb8, 0x51eb852b},			/* 0.84997=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3feac553, 0x3b36d0fa, 0x3fe570a3, 0xd70a3d7d},			/* 0.83658=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fea564a, 0xc0e73a22, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82303=f(0.68000)*/
-{62, 0,123,__LINE__, 0x3fe9e5d8, 0x5e4e552e, 0x3fe6147a, 0xe147ae21},			/* 0.80930=f(0.69000)*/
-{62, 0,123,__LINE__, 0x3fe973e8, 0x3f5d5c8a, 0x3fe66666, 0x66666673},			/* 0.79539=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe90064, 0xe8dbcbd3, 0x3fe6b851, 0xeb851ec5},			/* 0.78129=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe88b37, 0x047fd461, 0x3fe70a3d, 0x70a3d717},			/* 0.76699=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe81445, 0x24966281, 0x3fe75c28, 0xf5c28f69},			/* 0.75247=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe79b73, 0x7d7d54f8, 0x3fe7ae14, 0x7ae147bb},			/* 0.73772=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe720a3, 0x92c1d941, 0x3fe80000, 0x0000000d},			/* 0.72273=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe6a3b3, 0xd521f641, 0x3fe851eb, 0x851eb85f},			/* 0.70748=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe6247f, 0x2deee529, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.69195=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe5a2dc, 0x734c81d0, 0x3fe8f5c2, 0x8f5c2903},			/* 0.67613=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe51e9d, 0xbf6fcc30, 0x3fe947ae, 0x147ae155},			/* 0.65998=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe4978f, 0xa3269ecb, 0x3fe99999, 0x999999a7},			/* 0.64350=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe40d78, 0x29673085, 0x3fe9eb85, 0x1eb851f9},			/* 0.62664=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe38015, 0x9e14f6e6, 0x3fea3d70, 0xa3d70a4b},			/* 0.60938=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe2ef1d, 0x05145f4b, 0x3fea8f5c, 0x28f5c29d},			/* 0.59168=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe25a38, 0x276a634d, 0x3feae147, 0xae147aef},			/* 0.57351=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe1c103, 0x11437ff9, 0x3feb3333, 0x33333341},			/* 0.55481=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe12308, 0xcb4d549f, 0x3feb851e, 0xb851eb93},			/* 0.53552=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe07fbf, 0x005ae5e9, 0x3febd70a, 0x3d70a3e5},			/* 0.51559=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fdfad00, 0x2f93bde1, 0x3fec28f5, 0xc28f5c37},			/* 0.49493=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fde4d06, 0x152f28c1, 0x3fec7ae1, 0x47ae1489},			/* 0.47345=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fdcdd9f, 0x8f922e58, 0x3feccccc, 0xccccccdb},			/* 0.45102=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fdb5c5c, 0x6724eef9, 0x3fed1eb8, 0x51eb852d},			/* 0.42751=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fd9c618, 0xaa4ae1f4, 0x3fed70a3, 0xd70a3d7f},			/* 0.40271=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fd816aa, 0xbed3ca3c, 0x3fedc28f, 0x5c28f5d1},			/* 0.37638=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fd6485a, 0x22bc87c6, 0x3fee147a, 0xe147ae23},			/* 0.34816=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fd452e8, 0xfa93e3db, 0x3fee6666, 0x66666675},			/* 0.31756=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fd229ae, 0xc4763873, 0x3feeb851, 0xeb851ec7},			/* 0.28379=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fcf6eb0, 0xdd60718f, 0x3fef0a3d, 0x70a3d719},			/* 0.24556=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fc9a492, 0x7603775a, 0x3fef5c28, 0xf5c28f6b},			/* 0.20033=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fc21df7, 0x2882be2e, 0x3fefae14, 0x7ae147bd},			/* 0.14153=f(0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff00000, 0x00000007},			/* 64.0000=f(1.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x54442d18, 0x00000000, 0x00000000},			/* 1.57079=f(0.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{63, 0,123,__LINE__, 0x3fedac67, 0x0561bba9, 0x3fe33333, 0x333332ec},			/* 0.92729=f(0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_acos(m)   {run_vector_1(m,acos_vec,(char *)(acos),"acos","dd");   }	
diff --git a/newlib/libm/test/acosf_vec.c b/newlib/libm/test/acosf_vec.c
deleted file mode 100644
index f7ed3dbe7..000000000
--- a/newlib/libm/test/acosf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type acosf_vec[] = {
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 1, 0,123,__LINE__, 0x400921fb, 0x60000000, 0xbfefffff, 0xfffffffe},			/* 3.14159=f(-0.01000)*/
-{ 1, 0,123,__LINE__, 0x4008001c, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 3.00005=f(-0.99000)*/
-{ 1, 0,123,__LINE__, 0x400787b2, 0x40000000, 0xbfef5c28, 0xf5c28f5a},			/* 2.94125=f(-0.98000)*/
-{ 1, 0,123,__LINE__, 0x40072b10, 0x60000000, 0xbfef0a3d, 0x70a3d708},			/* 2.89602=f(-0.97000)*/
-{ 1, 0,123,__LINE__, 0x4006dcc5, 0x80000000, 0xbfeeb851, 0xeb851eb6},			/* 2.85779=f(-0.96000)*/
-{ 1, 0,123,__LINE__, 0x4006979e, 0x40000000, 0xbfee6666, 0x66666664},			/* 2.82403=f(-0.95000)*/
-{ 1, 0,123,__LINE__, 0x400658f0, 0x20000000, 0xbfee147a, 0xe147ae12},			/* 2.79342=f(-0.94000)*/
-{ 1, 0,123,__LINE__, 0x40061f26, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 2.76520=f(-0.93000)*/
-{ 1, 0,123,__LINE__, 0x4005e938, 0x60000000, 0xbfed70a3, 0xd70a3d6e},			/* 2.73887=f(-0.92000)*/
-{ 1, 0,123,__LINE__, 0x4005b66f, 0xe0000000, 0xbfed1eb8, 0x51eb851c},			/* 2.71408=f(-0.91000)*/
-{ 1, 0,123,__LINE__, 0x40058647, 0x60000000, 0xbfeccccc, 0xccccccca},			/* 2.69056=f(-0.90000)*/
-{ 1, 0,123,__LINE__, 0x4005585a, 0xa0000000, 0xbfec7ae1, 0x47ae1478},			/* 2.66814=f(-0.89000)*/
-{ 1, 0,123,__LINE__, 0x40052c5b, 0x60000000, 0xbfec28f5, 0xc28f5c26},			/* 2.64665=f(-0.88000)*/
-{ 1, 0,123,__LINE__, 0x4005020b, 0xa0000000, 0xbfebd70a, 0x3d70a3d4},			/* 2.62599=f(-0.87000)*/
-{ 1, 0,123,__LINE__, 0x4004d939, 0x40000000, 0xbfeb851e, 0xb851eb82},			/* 2.60606=f(-0.86000)*/
-{ 1, 0,123,__LINE__, 0x4004b1ba, 0xa0000000, 0xbfeb3333, 0x33333330},			/* 2.58678=f(-0.85000)*/
-{ 1, 0,123,__LINE__, 0x40048b6d, 0x40000000, 0xbfeae147, 0xae147ade},			/* 2.56807=f(-0.84000)*/
-{ 1, 0,123,__LINE__, 0x40046634, 0x20000000, 0xbfea8f5c, 0x28f5c28c},			/* 2.54990=f(-0.83000)*/
-{ 1, 0,123,__LINE__, 0x400441f6, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 2.53220=f(-0.82000)*/
-{ 1, 0,123,__LINE__, 0x40041e9d, 0x60000000, 0xbfe9eb85, 0x1eb851e8},			/* 2.51494=f(-0.81000)*/
-{ 1, 0,123,__LINE__, 0x4003fc17, 0x80000000, 0xbfe99999, 0x99999996},			/* 2.49809=f(-0.80000)*/
-{ 1, 0,123,__LINE__, 0x4003da54, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 2.48160=f(-0.79000)*/
-{ 1, 0,123,__LINE__, 0x4003b944, 0x40000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 2.46546=f(-0.78000)*/
-{ 1, 0,123,__LINE__, 0x400398db, 0x80000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 2.44963=f(-0.77000)*/
-{ 1, 0,123,__LINE__, 0x4003790e, 0x80000000, 0xbfe851eb, 0x851eb84e},			/* 2.43411=f(-0.76000)*/
-{ 1, 0,123,__LINE__, 0x400359d2, 0x80000000, 0xbfe7ffff, 0xfffffffc},			/* 2.41885=f(-0.75000)*/
-{ 1, 0,123,__LINE__, 0x40033b1e, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* 2.40386=f(-0.74000)*/
-{ 1, 0,123,__LINE__, 0x40031cea, 0x20000000, 0xbfe75c28, 0xf5c28f58},			/* 2.38911=f(-0.73000)*/
-{ 1, 0,123,__LINE__, 0x4002ff2d, 0xa0000000, 0xbfe70a3d, 0x70a3d706},			/* 2.37459=f(-0.72000)*/
-{ 1, 0,123,__LINE__, 0x4002e1e2, 0x20000000, 0xbfe6b851, 0xeb851eb4},			/* 2.36029=f(-0.71000)*/
-{ 1, 0,123,__LINE__, 0x4002c501, 0x40000000, 0xbfe66666, 0x66666662},			/* 2.34619=f(-0.70000)*/
-{ 1, 0,123,__LINE__, 0x4002a885, 0x40000000, 0xbfe6147a, 0xe147ae10},			/* 2.33228=f(-0.69000)*/
-{ 1, 0,123,__LINE__, 0x40028c68, 0xc0000000, 0xbfe5c28f, 0x5c28f5be},			/* 2.31855=f(-0.68000)*/
-{ 1, 0,123,__LINE__, 0x400270a6, 0xa0000000, 0xbfe570a3, 0xd70a3d6c},			/* 2.30500=f(-0.67000)*/
-{ 1, 0,123,__LINE__, 0x4002553a, 0x60000000, 0xbfe51eb8, 0x51eb851a},			/* 2.29161=f(-0.66000)*/
-{ 1, 0,123,__LINE__, 0x40023a1f, 0xc0000000, 0xbfe4cccc, 0xccccccc8},			/* 2.27838=f(-0.65000)*/
-{ 1, 0,123,__LINE__, 0x40021f52, 0xc0000000, 0xbfe47ae1, 0x47ae1476},			/* 2.26529=f(-0.64000)*/
-{ 1, 0,123,__LINE__, 0x400204cf, 0xe0000000, 0xbfe428f5, 0xc28f5c24},			/* 2.25235=f(-0.63000)*/
-{ 1, 0,123,__LINE__, 0x4001ea93, 0x80000000, 0xbfe3d70a, 0x3d70a3d2},			/* 2.23953=f(-0.62000)*/
-{ 1, 0,123,__LINE__, 0x4001d09a, 0x60000000, 0xbfe3851e, 0xb851eb80},			/* 2.22685=f(-0.61000)*/
-{ 1, 0,123,__LINE__, 0x4001b6e1, 0xa0000000, 0xbfe33333, 0x3333332e},			/* 2.21429=f(-0.60000)*/
-{ 1, 0,123,__LINE__, 0x40019d66, 0x40000000, 0xbfe2e147, 0xae147adc},			/* 2.20185=f(-0.59000)*/
-{ 1, 0,123,__LINE__, 0x40018425, 0xc0000000, 0xbfe28f5c, 0x28f5c28a},			/* 2.18952=f(-0.58000)*/
-{ 1, 0,123,__LINE__, 0x40016b1d, 0x80000000, 0xbfe23d70, 0xa3d70a38},			/* 2.17730=f(-0.57000)*/
-{ 1, 0,123,__LINE__, 0x4001524b, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 2.16518=f(-0.56000)*/
-{ 1, 0,123,__LINE__, 0x400139ac, 0x40000000, 0xbfe19999, 0x99999994},			/* 2.15316=f(-0.55000)*/
-{ 1, 0,123,__LINE__, 0x4001213f, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 2.14123=f(-0.54000)*/
-{ 1, 0,123,__LINE__, 0x40010901, 0x40000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 2.12939=f(-0.53000)*/
-{ 1, 0,123,__LINE__, 0x4000f0f1, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 2.11764=f(-0.52000)*/
-{ 1, 0,123,__LINE__, 0x4000d90c, 0xc0000000, 0xbfe051eb, 0x851eb84c},			/* 2.10598=f(-0.51000)*/
-{ 1, 0,123,__LINE__, 0x4000c152, 0x40000000, 0xbfdfffff, 0xfffffff4},			/* 2.09439=f(-0.50000)*/
-{ 1, 0,123,__LINE__, 0x4000a9c0, 0x40000000, 0xbfdf5c28, 0xf5c28f50},			/* 2.08288=f(-0.49000)*/
-{ 1, 0,123,__LINE__, 0x40009255, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 2.07145=f(-0.48000)*/
-{ 1, 0,123,__LINE__, 0x40007b0f, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 2.06008=f(-0.47000)*/
-{ 1, 0,123,__LINE__, 0x400063ec, 0xe0000000, 0xbfdd70a3, 0xd70a3d64},			/* 2.04879=f(-0.46000)*/
-{ 1, 0,123,__LINE__, 0x40004ced, 0x20000000, 0xbfdccccc, 0xccccccc0},			/* 2.03756=f(-0.45000)*/
-{ 1, 0,123,__LINE__, 0x4000360e, 0xa0000000, 0xbfdc28f5, 0xc28f5c1c},			/* 2.02639=f(-0.44000)*/
-{ 1, 0,123,__LINE__, 0x40001f4f, 0xe0000000, 0xbfdb851e, 0xb851eb78},			/* 2.01528=f(-0.43000)*/
-{ 1, 0,123,__LINE__, 0x400008af, 0xe0000000, 0xbfdae147, 0xae147ad4},			/* 2.00424=f(-0.42000)*/
-{16, 0,123,__LINE__, 0x3fffe45a, 0x80000000, 0xbfda3d70, 0xa3d70a30},			/* 1.99325=f(-0.41000)*/
-{16, 0,123,__LINE__, 0x3fffb78e, 0x00000000, 0xbfd99999, 0x9999998c},			/* 1.98231=f(-0.40000)*/
-{16, 0,123,__LINE__, 0x3fff8af8, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.97142=f(-0.39000)*/
-{17, 0,123,__LINE__, 0x3fff5e96, 0x60000000, 0xbfd851eb, 0x851eb844},			/* 1.96059=f(-0.38000)*/
-{19, 0,123,__LINE__, 0x3fff3267, 0x20000000, 0xbfd7ae14, 0x7ae147a0},			/* 1.94980=f(-0.37000)*/
-{18, 0,123,__LINE__, 0x3fff0668, 0x40000000, 0xbfd70a3d, 0x70a3d6fc},			/* 1.93906=f(-0.36000)*/
-{15, 0,123,__LINE__, 0x3ffeda97, 0xe0000000, 0xbfd66666, 0x66666658},			/* 1.92836=f(-0.35000)*/
-{15, 0,123,__LINE__, 0x3ffeaef4, 0x20000000, 0xbfd5c28f, 0x5c28f5b4},			/* 1.91771=f(-0.34000)*/
-{15, 0,123,__LINE__, 0x3ffe837b, 0x40000000, 0xbfd51eb8, 0x51eb8510},			/* 1.90710=f(-0.33000)*/
-{15, 0,123,__LINE__, 0x3ffe582b, 0x80000000, 0xbfd47ae1, 0x47ae146c},			/* 1.89652=f(-0.32000)*/
-{15, 0,123,__LINE__, 0x3ffe2d03, 0x40000000, 0xbfd3d70a, 0x3d70a3c8},			/* 1.88598=f(-0.31000)*/
-{15, 0,123,__LINE__, 0x3ffe0200, 0xc0000000, 0xbfd33333, 0x33333324},			/* 1.87548=f(-0.30000)*/
-{14, 0,123,__LINE__, 0x3ffdd722, 0x80000000, 0xbfd28f5c, 0x28f5c280},			/* 1.86502=f(-0.29000)*/
-{14, 0,123,__LINE__, 0x3ffdac67, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 1.85459=f(-0.28000)*/
-{14, 0,123,__LINE__, 0x3ffd81cc, 0xc0000000, 0xbfd147ae, 0x147ae138},			/* 1.84418=f(-0.27000)*/
-{14, 0,123,__LINE__, 0x3ffd5752, 0x20000000, 0xbfd0a3d7, 0x0a3d7094},			/* 1.83381=f(-0.26000)*/
-{14, 0,123,__LINE__, 0x3ffd2cf5, 0xc0000000, 0xbfcfffff, 0xffffffe0},			/* 1.82347=f(-0.25000)*/
-{14, 0,123,__LINE__, 0x3ffd02b6, 0x60000000, 0xbfceb851, 0xeb851e98},			/* 1.81316=f(-0.24000)*/
-{14, 0,123,__LINE__, 0x3ffcd892, 0x80000000, 0xbfcd70a3, 0xd70a3d50},			/* 1.80287=f(-0.23000)*/
-{14, 0,123,__LINE__, 0x3ffcae88, 0xc0000000, 0xbfcc28f5, 0xc28f5c08},			/* 1.79261=f(-0.22000)*/
-{14, 0,123,__LINE__, 0x3ffc8497, 0xc0000000, 0xbfcae147, 0xae147ac0},			/* 1.78237=f(-0.21000)*/
-{14, 0,123,__LINE__, 0x3ffc5abe, 0x80000000, 0xbfc99999, 0x99999978},			/* 1.77215=f(-0.20000)*/
-{14, 0,123,__LINE__, 0x3ffc30fb, 0x60000000, 0xbfc851eb, 0x851eb830},			/* 1.76195=f(-0.19000)*/
-{14, 0,123,__LINE__, 0x3ffc074d, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* 1.75178=f(-0.18000)*/
-{13, 0,123,__LINE__, 0x3ffbddb3, 0x40000000, 0xbfc5c28f, 0x5c28f5a0},			/* 1.74162=f(-0.17000)*/
-{13, 0,123,__LINE__, 0x3ffbb42b, 0xc0000000, 0xbfc47ae1, 0x47ae1458},			/* 1.73148=f(-0.16000)*/
-{13, 0,123,__LINE__, 0x3ffb8ab5, 0xa0000000, 0xbfc33333, 0x33333310},			/* 1.72136=f(-0.15000)*/
-{13, 0,123,__LINE__, 0x3ffb614f, 0xe0000000, 0xbfc1eb85, 0x1eb851c8},			/* 1.71125=f(-0.14000)*/
-{13, 0,123,__LINE__, 0x3ffb37f9, 0x20000000, 0xbfc0a3d7, 0x0a3d7080},			/* 1.70116=f(-0.13000)*/
-{13, 0,123,__LINE__, 0x3ffb0eb0, 0x80000000, 0xbfbeb851, 0xeb851e71},			/* 1.69108=f(-0.12000)*/
-{13, 0,123,__LINE__, 0x3ffae574, 0xa0000000, 0xbfbc28f5, 0xc28f5be2},			/* 1.68101=f(-0.11000)*/
-{13, 0,123,__LINE__, 0x3ffabc44, 0x80000000, 0xbfb99999, 0x99999953},			/* 1.67096=f(-0.00100)*/
-{13, 0,123,__LINE__, 0x3ffa931f, 0x20000000, 0xbfb70a3d, 0x70a3d6c4},			/* 1.66091=f(-0.09000)*/
-{13, 0,123,__LINE__, 0x3ffa6a03, 0x40000000, 0xbfb47ae1, 0x47ae1435},			/* 1.65088=f(-0.08000)*/
-{13, 0,123,__LINE__, 0x3ffa40ef, 0xc0000000, 0xbfb1eb85, 0x1eb851a6},			/* 1.64085=f(-0.07000)*/
-{13, 0,123,__LINE__, 0x3ffa17e3, 0xc0000000, 0xbfaeb851, 0xeb851e2d},			/* 1.63083=f(-0.06000)*/
-{13, 0,123,__LINE__, 0x3ff9eede, 0x00000000, 0xbfa99999, 0x9999990e},			/* 1.62081=f(-0.05000)*/
-{13, 0,123,__LINE__, 0x3ff9c5dd, 0xa0000000, 0xbfa47ae1, 0x47ae13ef},			/* 1.61080=f(-0.04000)*/
-{13, 0,123,__LINE__, 0x3ff99ce1, 0x60000000, 0xbf9eb851, 0xeb851da0},			/* 1.60080=f(-0.03000)*/
-{13, 0,123,__LINE__, 0x3ff973e8, 0x40000000, 0xbf947ae1, 0x47ae1362},			/* 1.59079=f(-0.02000)*/
-{13, 0,123,__LINE__, 0x3ff94af1, 0x40000000, 0xbf847ae1, 0x47ae1249},			/* 1.58079=f(-0.00010)*/
-{13, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0x3cd19000, 0x00000000},			/* 1.57079=f(9.74915e-16)*/
-{13, 0,123,__LINE__, 0x3ff8f905, 0x80000000, 0x3f847ae1, 0x47ae16ad},			/* 1.56079=f(0.01000)*/
-{13, 0,123,__LINE__, 0x3ff8d00e, 0x80000000, 0x3f947ae1, 0x47ae1594},			/* 1.55079=f(0.02000)*/
-{13, 0,123,__LINE__, 0x3ff8a715, 0x60000000, 0x3f9eb851, 0xeb851fd2},			/* 1.54079=f(0.03000)*/
-{13, 0,123,__LINE__, 0x3ff87e19, 0x20000000, 0x3fa47ae1, 0x47ae1508},			/* 1.53078=f(0.04000)*/
-{13, 0,123,__LINE__, 0x3ff85518, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 1.52077=f(0.05000)*/
-{13, 0,123,__LINE__, 0x3ff82c13, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 1.51076=f(0.06000)*/
-{13, 0,123,__LINE__, 0x3ff80307, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 1.50073=f(0.07000)*/
-{12, 0,123,__LINE__, 0x3ff7d9f3, 0x80000000, 0x3fb47ae1, 0x47ae14c1},			/* 1.49071=f(0.08000)*/
-{12, 0,123,__LINE__, 0x3ff7b0d7, 0xa0000000, 0x3fb70a3d, 0x70a3d750},			/* 1.48067=f(0.09000)*/
-{12, 0,123,__LINE__, 0x3ff787b2, 0x40000000, 0x3fb99999, 0x999999df},			/* 1.47062=f(0.10000)*/
-{12, 0,123,__LINE__, 0x3ff75e82, 0x20000000, 0x3fbc28f5, 0xc28f5c6e},			/* 1.46057=f(0.11000)*/
-{12, 0,123,__LINE__, 0x3ff73546, 0x40000000, 0x3fbeb851, 0xeb851efd},			/* 1.45050=f(0.12000)*/
-{12, 0,123,__LINE__, 0x3ff70bfd, 0xa0000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.44042=f(0.13000)*/
-{12, 0,123,__LINE__, 0x3ff6e2a6, 0xe0000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.43033=f(0.14000)*/
-{12, 0,123,__LINE__, 0x3ff6b941, 0x20000000, 0x3fc33333, 0x33333356},			/* 1.42022=f(0.15000)*/
-{12, 0,123,__LINE__, 0x3ff68fcb, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 1.41010=f(0.16000)*/
-{12, 0,123,__LINE__, 0x3ff66643, 0x80000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.39996=f(0.17000)*/
-{12, 0,123,__LINE__, 0x3ff63ca9, 0x40000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.38981=f(0.18000)*/
-{12, 0,123,__LINE__, 0x3ff612fb, 0x60000000, 0x3fc851eb, 0x851eb876},			/* 1.37963=f(0.19000)*/
-{12, 0,123,__LINE__, 0x3ff5e938, 0x40000000, 0x3fc99999, 0x999999be},			/* 1.36943=f(0.20000)*/
-{12, 0,123,__LINE__, 0x3ff5bf5f, 0x00000000, 0x3fcae147, 0xae147b06},			/* 1.35922=f(0.21000)*/
-{12, 0,123,__LINE__, 0x3ff5956e, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.34898=f(0.22000)*/
-{12, 0,123,__LINE__, 0x3ff56b64, 0x40000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.33871=f(0.23000)*/
-{12, 0,123,__LINE__, 0x3ff54140, 0x60000000, 0x3fceb851, 0xeb851ede},			/* 1.32843=f(0.24000)*/
-{12, 0,123,__LINE__, 0x3ff51701, 0x00000000, 0x3fd00000, 0x00000013},			/* 1.31811=f(0.25000)*/
-{12, 0,123,__LINE__, 0x3ff4eca4, 0xa0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.30777=f(0.26000)*/
-{12, 0,123,__LINE__, 0x3ff4c22a, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 1.29740=f(0.27000)*/
-{12, 0,123,__LINE__, 0x3ff4978f, 0xc0000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.28700=f(0.28000)*/
-{12, 0,123,__LINE__, 0x3ff46cd4, 0x40000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.27657=f(0.29000)*/
-{12, 0,123,__LINE__, 0x3ff441f6, 0x00000000, 0x3fd33333, 0x33333347},			/* 1.26610=f(0.30000)*/
-{12, 0,123,__LINE__, 0x3ff416f3, 0x80000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.25560=f(0.31000)*/
-{12, 0,123,__LINE__, 0x3ff3ebcb, 0x40000000, 0x3fd47ae1, 0x47ae148f},			/* 1.24506=f(0.32000)*/
-{12, 0,123,__LINE__, 0x3ff3c07b, 0x80000000, 0x3fd51eb8, 0x51eb8533},			/* 1.23449=f(0.33000)*/
-{12, 0,123,__LINE__, 0x3ff39502, 0xa0000000, 0x3fd5c28f, 0x5c28f5d7},			/* 1.22387=f(0.34000)*/
-{12, 0,123,__LINE__, 0x3ff3695e, 0xe0000000, 0x3fd66666, 0x6666667b},			/* 1.21322=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3ff33d8e, 0x80000000, 0x3fd70a3d, 0x70a3d71f},			/* 1.20252=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3ff3118f, 0xa0000000, 0x3fd7ae14, 0x7ae147c3},			/* 1.19178=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3ff2e560, 0x60000000, 0x3fd851eb, 0x851eb867},			/* 1.18100=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3ff2b8fe, 0xc0000000, 0x3fd8f5c2, 0x8f5c290b},			/* 1.17016=f(0.39000)*/
-{12, 0,123,__LINE__, 0x3ff28c68, 0xc0000000, 0x3fd99999, 0x999999af},			/* 1.15928=f(0.40000)*/
-{12, 0,123,__LINE__, 0x3ff25f9c, 0x40000000, 0x3fda3d70, 0xa3d70a53},			/* 1.14834=f(0.41000)*/
-{12, 0,123,__LINE__, 0x3ff23297, 0x00000000, 0x3fdae147, 0xae147af7},			/* 1.13735=f(0.42000)*/
-{12, 0,123,__LINE__, 0x3ff20556, 0xe0000000, 0x3fdb851e, 0xb851eb9b},			/* 1.12630=f(0.43000)*/
-{12, 0,123,__LINE__, 0x3ff1d7d9, 0x80000000, 0x3fdc28f5, 0xc28f5c3f},			/* 1.11519=f(0.44000)*/
-{12, 0,123,__LINE__, 0x3ff1aa1c, 0x80000000, 0x3fdccccc, 0xcccccce3},			/* 1.10403=f(0.45000)*/
-{12, 0,123,__LINE__, 0x3ff17c1d, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 1.09280=f(0.46000)*/
-{12, 0,123,__LINE__, 0x3ff14dd8, 0xc0000000, 0x3fde147a, 0xe147ae2b},			/* 1.08150=f(0.47000)*/
-{12, 0,123,__LINE__, 0x3ff11f4c, 0xe0000000, 0x3fdeb851, 0xeb851ecf},			/* 1.07014=f(0.48000)*/
-{12, 0,123,__LINE__, 0x3ff0f076, 0x40000000, 0x3fdf5c28, 0xf5c28f73},			/* 1.05870=f(0.49000)*/
-{12, 0,123,__LINE__, 0x3ff0c152, 0x40000000, 0x3fe00000, 0x0000000b},			/* 1.04719=f(0.50000)*/
-{12, 0,123,__LINE__, 0x3ff091dd, 0x60000000, 0x3fe051eb, 0x851eb85d},			/* 1.03561=f(0.51000)*/
-{12, 0,123,__LINE__, 0x3ff06214, 0xa0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 1.02394=f(0.52000)*/
-{12, 0,123,__LINE__, 0x3ff031f4, 0x40000000, 0x3fe0f5c2, 0x8f5c2901},			/* 1.01219=f(0.53000)*/
-{12, 0,123,__LINE__, 0x3ff00178, 0xa0000000, 0x3fe147ae, 0x147ae153},			/* 1.00035=f(0.54000)*/
-{11, 0,123,__LINE__, 0x3fefa13c, 0x40000000, 0x3fe19999, 0x999999a5},			/* 0.98843=f(0.55000)*/
-{11, 0,123,__LINE__, 0x3fef3ec1, 0x60000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.97641=f(0.56000)*/
-{11, 0,123,__LINE__, 0x3feedb77, 0xa0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.96429=f(0.57000)*/
-{11, 0,123,__LINE__, 0x3fee7756, 0xa0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.95206=f(0.58000)*/
-{11, 0,123,__LINE__, 0x3fee1254, 0x80000000, 0x3fe2e147, 0xae147aed},			/* 0.93973=f(0.59000)*/
-{11, 0,123,__LINE__, 0x3fedac67, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.92729=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3fed4583, 0xe0000000, 0x3fe3851e, 0xb851eb91},			/* 0.91473=f(0.61000)*/
-{11, 0,123,__LINE__, 0x3fecdd9f, 0xa0000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.90205=f(0.62000)*/
-{11, 0,123,__LINE__, 0x3fec74ae, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 0.88924=f(0.63000)*/
-{11, 0,123,__LINE__, 0x3fec0aa2, 0x40000000, 0x3fe47ae1, 0x47ae1487},			/* 0.87629=f(0.64000)*/
-{11, 0,123,__LINE__, 0x3feb9f6e, 0x80000000, 0x3fe4cccc, 0xccccccd9},			/* 0.86321=f(0.65000)*/
-{11, 0,123,__LINE__, 0x3feb3304, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.84997=f(0.66000)*/
-{11, 0,123,__LINE__, 0x3feac553, 0x20000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.83658=f(0.67000)*/
-{11, 0,123,__LINE__, 0x3fea564a, 0xc0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82303=f(0.68000)*/
-{11, 0,123,__LINE__, 0x3fe9e5d8, 0x60000000, 0x3fe6147a, 0xe147ae21},			/* 0.80930=f(0.69000)*/
-{11, 0,123,__LINE__, 0x3fe973e8, 0x40000000, 0x3fe66666, 0x66666673},			/* 0.79539=f(0.70000)*/
-{11, 0,123,__LINE__, 0x3fe90065, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 0.78129=f(0.71000)*/
-{11, 0,123,__LINE__, 0x3fe88b36, 0xe0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.76699=f(0.72000)*/
-{11, 0,123,__LINE__, 0x3fe81445, 0x20000000, 0x3fe75c28, 0xf5c28f69},			/* 0.75247=f(0.73000)*/
-{11, 0,123,__LINE__, 0x3fe79b73, 0x60000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.73772=f(0.74000)*/
-{11, 0,123,__LINE__, 0x3fe720a3, 0x80000000, 0x3fe80000, 0x0000000d},			/* 0.72273=f(0.75000)*/
-{11, 0,123,__LINE__, 0x3fe6a3b3, 0xc0000000, 0x3fe851eb, 0x851eb85f},			/* 0.70748=f(0.76000)*/
-{11, 0,123,__LINE__, 0x3fe6247f, 0x40000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.69195=f(0.77000)*/
-{11, 0,123,__LINE__, 0x3fe5a2dc, 0xa0000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.67613=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3fe51e9d, 0xa0000000, 0x3fe947ae, 0x147ae155},			/* 0.65998=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3fe4978f, 0xa0000000, 0x3fe99999, 0x999999a7},			/* 0.64350=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3fe40d78, 0x20000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.62664=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3fe38015, 0xa0000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.60938=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3fe2ef1d, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.59168=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3fe25a38, 0x40000000, 0x3feae147, 0xae147aef},			/* 0.57351=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3fe1c103, 0x00000000, 0x3feb3333, 0x33333341},			/* 0.55481=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3fe12308, 0xc0000000, 0x3feb851e, 0xb851eb93},			/* 0.53552=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3fe07fbf, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 0.51559=f(0.87000)*/
-{10, 0,123,__LINE__, 0x3fdfad00, 0x40000000, 0x3fec28f5, 0xc28f5c37},			/* 0.49493=f(0.88000)*/
-{10, 0,123,__LINE__, 0x3fde4d06, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 0.47345=f(0.89000)*/
-{10, 0,123,__LINE__, 0x3fdcdd9f, 0xc0000000, 0x3feccccc, 0xccccccdb},			/* 0.45102=f(0.90000)*/
-{10, 0,123,__LINE__, 0x3fdb5c5c, 0x20000000, 0x3fed1eb8, 0x51eb852d},			/* 0.42751=f(0.91000)*/
-{10, 0,123,__LINE__, 0x3fd9c618, 0x60000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.40271=f(0.92000)*/
-{10, 0,123,__LINE__, 0x3fd816aa, 0xa0000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.37638=f(0.93000)*/
-{10, 0,123,__LINE__, 0x3fd6485a, 0x20000000, 0x3fee147a, 0xe147ae23},			/* 0.34816=f(0.94000)*/
-{10, 0,123,__LINE__, 0x3fd452e9, 0x20000000, 0x3fee6666, 0x66666675},			/* 0.31756=f(0.95000)*/
-{10, 0,123,__LINE__, 0x3fd229af, 0x20000000, 0x3feeb851, 0xeb851ec7},			/* 0.28379=f(0.96000)*/
-{10, 0,123,__LINE__, 0x3fcf6eaf, 0xe0000000, 0x3fef0a3d, 0x70a3d719},			/* 0.24556=f(0.97000)*/
-{10, 0,123,__LINE__, 0x3fc9a491, 0xa0000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.20033=f(0.98000)*/
-{10, 0,123,__LINE__, 0x3fc21df6, 0xa0000000, 0x3fefae14, 0x7ae147bd},			/* 0.14153=f(0.99000)*/
-{ 2, 0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 0.00000=f(1.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{13, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0x00000000, 0x00000000},			/* 1.57079=f(0.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{11, 0,123,__LINE__, 0x3fedac67, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.92729=f(0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_acosf(m)   {run_vector_1(m,acosf_vec,(char *)(acosf),"acosf","ff");   }	
diff --git a/newlib/libm/test/acosh_vec.c b/newlib/libm/test/acosh_vec.c
deleted file mode 100644
index 48f169c8b..000000000
--- a/newlib/libm/test/acosh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type acosh_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3cd19000, 0x00000000},			/* 64.0000=f(9.74915e-16)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 64.0000=f(0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 64.0000=f(0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 64.0000=f(0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 64.0000=f(0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 64.0000=f(0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 64.0000=f(0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 64.0000=f(0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 64.0000=f(0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 64.0000=f(0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb99999, 0x999999df},			/* 64.0000=f(0.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 64.0000=f(0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 64.0000=f(0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 64.0000=f(0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 64.0000=f(0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc33333, 0x33333356},			/* 64.0000=f(0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 64.0000=f(0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 64.0000=f(0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 64.0000=f(0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 64.0000=f(0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc99999, 0x999999be},			/* 64.0000=f(0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 64.0000=f(0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 64.0000=f(0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 64.0000=f(0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 64.0000=f(0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd00000, 0x00000013},			/* 64.0000=f(0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 64.0000=f(0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 64.0000=f(0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 64.0000=f(0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 64.0000=f(0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd33333, 0x33333347},			/* 64.0000=f(0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 64.0000=f(0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 64.0000=f(0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 64.0000=f(0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 64.0000=f(0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 64.0000=f(0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 64.0000=f(0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 64.0000=f(0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 64.0000=f(0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 64.0000=f(0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd99999, 0x999999af},			/* 64.0000=f(0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 64.0000=f(0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 64.0000=f(0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 64.0000=f(0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 64.0000=f(0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 64.0000=f(0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 64.0000=f(0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 64.0000=f(0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 64.0000=f(0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 64.0000=f(0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 64.0000=f(0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 64.0000=f(0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 64.0000=f(0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 64.0000=f(0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 64.0000=f(0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 64.0000=f(0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 64.0000=f(0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 64.0000=f(0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 64.0000=f(0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 64.0000=f(0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 64.0000=f(0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 64.0000=f(0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 64.0000=f(0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 64.0000=f(0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 64.0000=f(0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 64.0000=f(0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 64.0000=f(0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 64.0000=f(0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 64.0000=f(0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 64.0000=f(0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe66666, 0x66666673},			/* 64.0000=f(0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 64.0000=f(0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 64.0000=f(0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 64.0000=f(0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 64.0000=f(0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 64.0000=f(0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 64.0000=f(0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 64.0000=f(0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 64.0000=f(0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 64.0000=f(0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 64.0000=f(0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 64.0000=f(0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 64.0000=f(0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 64.0000=f(0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feae147, 0xae147aef},			/* 64.0000=f(0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feb3333, 0x33333341},			/* 64.0000=f(0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 64.0000=f(0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 64.0000=f(0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 64.0000=f(0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 64.0000=f(0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 64.0000=f(0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 64.0000=f(0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 64.0000=f(0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 64.0000=f(0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 64.0000=f(0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fee6666, 0x66666675},			/* 64.0000=f(0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 64.0000=f(0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 64.0000=f(0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 64.0000=f(0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 64.0000=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3e6deeea, 0x11683f4a, 0x3ff00000, 0x00000007},			/* 5.57550e-08=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fc2163d, 0xee5f07f9, 0x3ff028f5, 0xc28f5c30},			/* 0.14130=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fc98eb9, 0xe7e5fd58, 0x3ff051eb, 0x851eb859},			/* 0.19966=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fcf468e, 0x57434f4b, 0x3ff07ae1, 0x47ae1482},			/* 0.24434=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fd20ac9, 0x107d5e9a, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.28190=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fd427ba, 0x2a941d9f, 0x3ff0cccc, 0xccccccd4},			/* 0.31492=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fd60f95, 0x22de1cc2, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.34470=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fd7cf1f, 0x7a34d794, 0x3ff11eb8, 0x51eb8526},			/* 0.37201=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fd96ead, 0x72fe8b7b, 0x3ff147ae, 0x147ae14f},			/* 0.39738=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fdaf409, 0x85d31cf8, 0x3ff170a3, 0xd70a3d78},			/* 0.42114=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fdc636c, 0x1a882f69, 0x3ff19999, 0x999999a1},			/* 0.44356=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fddc005, 0x97e5fb4d, 0x3ff1c28f, 0x5c28f5ca},			/* 0.46484=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fdf0c50, 0xde26552c, 0x3ff1eb85, 0x1eb851f3},			/* 0.48512=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fe02523, 0xa6a3357e, 0x3ff2147a, 0xe147ae1c},			/* 0.50453=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fe0bdc1, 0x86cd1a78, 0x3ff23d70, 0xa3d70a45},			/* 0.52316=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fe150ab, 0x3dddd7d0, 0x3ff26666, 0x6666666e},			/* 0.54109=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fe1de6e, 0x5347350c, 0x3ff28f5c, 0x28f5c297},			/* 0.55840=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fe26782, 0x9cd65ec3, 0x3ff2b851, 0xeb851ec0},			/* 0.57513=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fe2ec4e, 0xa565fcda, 0x3ff2e147, 0xae147ae9},			/* 0.59134=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fe36d2a, 0xfd6a7945, 0x3ff30a3d, 0x70a3d712},			/* 0.60707=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff05f23, 0xc6cbaf31, 0x3ff921fb, 0x54442d18},			/* 1.02322=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ffcfc02, 0xf90106c2, 0x400921fb, 0x54442d18},			/* 1.81152=f(3.14159)*/
-{64, 0,123,__LINE__, 0x4001dae8, 0xc0b16d3a, 0x4012d97c, 0x7f3321d2},			/* 2.23188=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 64.0000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff799c8, 0x8e7913fb, 0x40026666, 0x66666654},			/* 1.47504=f(2.30000)*/
-{64, 0,123,__LINE__, 0x400081eb, 0x4b42158d, 0x400fffff, 0xffffffee},			/* 2.06343=f(4.00000)*/
-{64, 0,123,__LINE__, 0x40036818, 0xad5efded, 0x4016cccc, 0xccccccc4},			/* 2.42582=f(5.70000)*/
-{64, 0,123,__LINE__, 0x4005852e, 0x905215c9, 0x401d9999, 0x99999991},			/* 2.69003=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40072fe6, 0x812dfbf7, 0x40223333, 0x3333332f},			/* 2.89838=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40089078, 0xdf0e2775, 0x40259999, 0x99999995},			/* 3.07054=f(10.8000)*/
-{64, 0,123,__LINE__, 0x4009bcf9, 0x1653a9ba, 0x4028ffff, 0xfffffffb},			/* 3.21727=f(12.5000)*/
-{64, 0,123,__LINE__, 0x400ac2dc, 0x6e1e5efd, 0x402c6666, 0x66666661},			/* 3.34514=f(14.2000)*/
-{64, 0,123,__LINE__, 0x400baaf5, 0x6e4f1835, 0x402fcccc, 0xccccccc7},			/* 3.45847=f(15.9000)*/
-{64, 0,123,__LINE__, 0x400c7b5e, 0x132b5044, 0x40319999, 0x99999997},			/* 3.56023=f(17.6000)*/
-{64, 0,123,__LINE__, 0x400d387c, 0x181abbba, 0x40334ccc, 0xccccccca},			/* 3.65258=f(19.3000)*/
-{64, 0,123,__LINE__, 0x400de595, 0xdc406bd2, 0x4034ffff, 0xfffffffd},			/* 3.73710=f(21.0000)*/
-{64, 0,123,__LINE__, 0x400e852c, 0xa8e313ce, 0x4036b333, 0x33333330},			/* 3.81502=f(22.7000)*/
-{64, 0,123,__LINE__, 0x400f1936, 0x0e3b986c, 0x40386666, 0x66666663},			/* 3.88731=f(24.4000)*/
-{64, 0,123,__LINE__, 0x400fa341, 0xc64646d7, 0x403a1999, 0x99999996},			/* 3.95471=f(26.1000)*/
-{64, 0,123,__LINE__, 0x40101249, 0xc6ea2cbb, 0x403bcccc, 0xccccccc9},			/* 4.01786=f(27.8000)*/
-{64, 0,123,__LINE__, 0x40104f1a, 0xa2d94c29, 0x403d7fff, 0xfffffffc},			/* 4.07725=f(29.5000)*/
-0,};
-test_acosh(m)   {run_vector_1(m,acosh_vec,(char *)(acosh),"acosh","dd");   }	
diff --git a/newlib/libm/test/acoshf_vec.c b/newlib/libm/test/acoshf_vec.c
deleted file mode 100644
index ba40d2987..000000000
--- a/newlib/libm/test/acoshf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type acoshf_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3cd19000, 0x00000000},			/* 64.0000=f(9.74915e-16)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 64.0000=f(0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 64.0000=f(0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 64.0000=f(0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 64.0000=f(0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 64.0000=f(0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 64.0000=f(0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 64.0000=f(0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 64.0000=f(0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 64.0000=f(0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fb99999, 0x999999df},			/* 64.0000=f(0.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 64.0000=f(0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 64.0000=f(0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 64.0000=f(0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 64.0000=f(0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc33333, 0x33333356},			/* 64.0000=f(0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 64.0000=f(0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 64.0000=f(0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 64.0000=f(0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 64.0000=f(0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fc99999, 0x999999be},			/* 64.0000=f(0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 64.0000=f(0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 64.0000=f(0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 64.0000=f(0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 64.0000=f(0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd00000, 0x00000013},			/* 64.0000=f(0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 64.0000=f(0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 64.0000=f(0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 64.0000=f(0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 64.0000=f(0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd33333, 0x33333347},			/* 64.0000=f(0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 64.0000=f(0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 64.0000=f(0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 64.0000=f(0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 64.0000=f(0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 64.0000=f(0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 64.0000=f(0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 64.0000=f(0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 64.0000=f(0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 64.0000=f(0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fd99999, 0x999999af},			/* 64.0000=f(0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 64.0000=f(0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 64.0000=f(0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 64.0000=f(0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 64.0000=f(0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 64.0000=f(0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 64.0000=f(0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 64.0000=f(0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 64.0000=f(0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 64.0000=f(0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 64.0000=f(0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 64.0000=f(0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 64.0000=f(0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 64.0000=f(0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 64.0000=f(0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 64.0000=f(0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 64.0000=f(0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 64.0000=f(0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 64.0000=f(0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 64.0000=f(0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 64.0000=f(0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 64.0000=f(0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 64.0000=f(0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 64.0000=f(0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 64.0000=f(0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 64.0000=f(0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 64.0000=f(0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 64.0000=f(0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 64.0000=f(0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 64.0000=f(0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe66666, 0x66666673},			/* 64.0000=f(0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 64.0000=f(0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 64.0000=f(0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 64.0000=f(0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 64.0000=f(0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 64.0000=f(0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 64.0000=f(0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 64.0000=f(0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 64.0000=f(0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 64.0000=f(0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 64.0000=f(0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 64.0000=f(0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 64.0000=f(0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 64.0000=f(0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feae147, 0xae147aef},			/* 64.0000=f(0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feb3333, 0x33333341},			/* 64.0000=f(0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 64.0000=f(0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 64.0000=f(0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 64.0000=f(0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 64.0000=f(0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 64.0000=f(0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 64.0000=f(0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 64.0000=f(0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 64.0000=f(0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 64.0000=f(0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fee6666, 0x66666675},			/* 64.0000=f(0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 64.0000=f(0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 64.0000=f(0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 64.0000=f(0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 64.0000=f(0.99000)*/
-{ 1, 0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 0.00000=f(1.00000)*/
-{ 1, 0,123,__LINE__, 0x3fc2163d, 0x40000000, 0x3ff028f5, 0xc28f5c30},			/* 0.14130=f(1.01000)*/
-{ 1, 0,123,__LINE__, 0x3fc98eb9, 0x20000000, 0x3ff051eb, 0x851eb859},			/* 0.19966=f(1.02000)*/
-{ 1, 0,123,__LINE__, 0x3fcf468d, 0x80000000, 0x3ff07ae1, 0x47ae1482},			/* 0.24434=f(1.03000)*/
-{ 1, 0,123,__LINE__, 0x3fd20ac8, 0x80000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.28190=f(1.04000)*/
-{ 1, 0,123,__LINE__, 0x3fd427b9, 0xa0000000, 0x3ff0cccc, 0xccccccd4},			/* 0.31492=f(1.05000)*/
-{ 1, 0,123,__LINE__, 0x3fd60f94, 0x80000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.34470=f(1.06000)*/
-{ 1, 0,123,__LINE__, 0x3fd7cf20, 0x3dc00000, 0x3ff11eb8, 0x51eb8526},			/* 0.37201=f(1.07000)*/
-{ 1, 0,123,__LINE__, 0x3fd96ead, 0xbdc00000, 0x3ff147ae, 0x147ae14f},			/* 0.39738=f(1.08000)*/
-{ 1, 0,123,__LINE__, 0x3fdaf409, 0xbdc00000, 0x3ff170a3, 0xd70a3d78},			/* 0.42114=f(1.09000)*/
-{ 1, 0,123,__LINE__, 0x3fdc636c, 0x4dc00000, 0x3ff19999, 0x999999a1},			/* 0.44356=f(1.10000)*/
-{ 1, 0,123,__LINE__, 0x3fddc005, 0xadc00000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.46484=f(1.11000)*/
-{ 1, 0,123,__LINE__, 0x3fdf0c50, 0xbdc00000, 0x3ff1eb85, 0x1eb851f3},			/* 0.48512=f(1.12000)*/
-{ 1, 0,123,__LINE__, 0x3fe02523, 0x9ee00000, 0x3ff2147a, 0xe147ae1c},			/* 0.50453=f(1.13000)*/
-{ 1, 0,123,__LINE__, 0x3fe0bdc1, 0x66e00000, 0x3ff23d70, 0xa3d70a45},			/* 0.52316=f(1.14000)*/
-{ 1, 0,123,__LINE__, 0x3fe150ab, 0x2ee00000, 0x3ff26666, 0x6666666e},			/* 0.54109=f(1.15000)*/
-{ 1, 0,123,__LINE__, 0x3fe1de6e, 0x2ee00000, 0x3ff28f5c, 0x28f5c297},			/* 0.55840=f(1.16000)*/
-{ 1, 0,123,__LINE__, 0x3fe26782, 0x6ee00000, 0x3ff2b851, 0xeb851ec0},			/* 0.57513=f(1.17000)*/
-{ 1, 0,123,__LINE__, 0x3fe2ec4e, 0x76e00000, 0x3ff2e147, 0xae147ae9},			/* 0.59134=f(1.18000)*/
-{ 1, 0,123,__LINE__, 0x3fe36d2b, 0x22e00000, 0x3ff30a3d, 0x70a3d712},			/* 0.60707=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 1, 0,123,__LINE__, 0x3ff05f23, 0xd7700000, 0x3ff921fb, 0x54442d18},			/* 1.02322=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3ffcfc03, 0x06500000, 0x400921fb, 0x54442d18},			/* 1.81152=f(3.14159)*/
-{14, 0,123,__LINE__, 0x4001dae8, 0xbf280000, 0x4012d97c, 0x7f3321d2},			/* 2.23188=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 64.0000=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0x3ff799c8, 0x90e00000, 0x40026666, 0x66666654},			/* 1.47504=f(2.30000)*/
-{14, 0,123,__LINE__, 0x400081eb, 0x4d280000, 0x400fffff, 0xffffffee},			/* 2.06343=f(4.00000)*/
-{13, 0,123,__LINE__, 0x40036818, 0xab280000, 0x4016cccc, 0xccccccc4},			/* 2.42582=f(5.70000)*/
-{15, 0,123,__LINE__, 0x4005852e, 0x93e00000, 0x401d9999, 0x99999991},			/* 2.69003=f(7.40000)*/
-{14, 0,123,__LINE__, 0x40072fe6, 0x8ee00000, 0x40223333, 0x3333332f},			/* 2.89838=f(9.10000)*/
-{12, 0,123,__LINE__, 0x40089078, 0xeae00000, 0x40259999, 0x99999995},			/* 3.07054=f(10.8000)*/
-{12, 0,123,__LINE__, 0x4009bcf9, 0x18980000, 0x4028ffff, 0xfffffffb},			/* 3.21727=f(12.5000)*/
-{12, 0,123,__LINE__, 0x400ac2dc, 0x6a980000, 0x402c6666, 0x66666661},			/* 3.34514=f(14.2000)*/
-{12, 0,123,__LINE__, 0x400baaf5, 0x6e280000, 0x402fcccc, 0xccccccc7},			/* 3.45847=f(15.9000)*/
-{12, 0,123,__LINE__, 0x400c7b5e, 0x1a980000, 0x40319999, 0x99999997},			/* 3.56023=f(17.6000)*/
-{12, 0,123,__LINE__, 0x400d387c, 0x04980000, 0x40334ccc, 0xccccccca},			/* 3.65258=f(19.3000)*/
-{12, 0,123,__LINE__, 0x400de595, 0xde980000, 0x4034ffff, 0xfffffffd},			/* 3.73710=f(21.0000)*/
-{12, 0,123,__LINE__, 0x400e852c, 0xb6500000, 0x4036b333, 0x33333330},			/* 3.81502=f(22.7000)*/
-{12, 0,123,__LINE__, 0x400f1936, 0x0e500000, 0x40386666, 0x66666663},			/* 3.88731=f(24.4000)*/
-{12, 0,123,__LINE__, 0x400fa341, 0xd0500000, 0x403a1999, 0x99999996},			/* 3.95471=f(26.1000)*/
-{11, 0,123,__LINE__, 0x40101249, 0xc6280000, 0x403bcccc, 0xccccccc9},			/* 4.01785=f(27.8000)*/
-{11, 0,123,__LINE__, 0x40104f1a, 0xa0280000, 0x403d7fff, 0xfffffffc},			/* 4.07725=f(29.5000)*/
-0,};
-test_acoshf(m)   {run_vector_1(m,acoshf_vec,(char *)(acoshf),"acoshf","ff");   }	
diff --git a/newlib/libm/test/asin_vec.c b/newlib/libm/test/asin_vec.c
deleted file mode 100644
index 4215cc70d..000000000
--- a/newlib/libm/test/asin_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type asin_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbff921fb, 0x4e9c057e, 0xbfefffff, 0xfffffffe},			/* -1.57079=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbff6de3c, 0x6f33d516, 0xbfefae14, 0x7ae147ac},			/* -1.42925=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbff5ed69, 0x0583be02, 0xbfef5c28, 0xf5c28f5a},			/* -1.37046=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbff53425, 0x38981ec3, 0xbfef0a3d, 0x70a3d708},			/* -1.32523=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbff4978f, 0xa3269edd, 0xbfeeb851, 0xeb851eb6},			/* -1.28700=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbff40d41, 0x159f3406, 0xbfee6666, 0x66666664},			/* -1.25323=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbff38fe4, 0xcb950b0e, 0xbfee147a, 0xe147ae12},			/* -1.22263=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbff31c50, 0xa48f3a72, 0xbfedc28f, 0x5c28f5c0},			/* -1.19441=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbff2b075, 0x29b17486, 0xbfed70a3, 0xd70a3d6e},			/* -1.16808=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbff24ae4, 0x3a7af145, 0xbfed1eb8, 0x51eb851c},			/* -1.14328=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbff1ea93, 0x705fa16e, 0xbfeccccc, 0xccccccca},			/* -1.11977=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbff18eb9, 0xcef862d5, 0xbfec7ae1, 0x47ae1478},			/* -1.09734=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbff136bb, 0x485f3d8e, 0xbfec28f5, 0xc28f5c26},			/* -1.07586=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbff0e21b, 0xd416ba13, 0xbfebd70a, 0x3d70a3d4},			/* -1.05520=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbff09076, 0xee9d82b8, 0xbfeb851e, 0xb851eb82},			/* -1.03527=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbff04179, 0xcba26d0b, 0xbfeb3333, 0x33333330},			/* -1.01598=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfefe9be, 0x811df6c4, 0xbfeae147, 0xae147ade},			/* -0.99728=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfef54d9, 0xa373fac6, 0xbfea8f5c, 0x28f5c28c},			/* -0.97910=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfeec3e1, 0x0a73632b, 0xbfea3d70, 0xa3d70a3a},			/* -0.96141=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfee367e, 0x7f21298e, 0xbfe9eb85, 0x1eb851e8},			/* -0.94415=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfedac67, 0x0561bb49, 0xbfe99999, 0x99999996},			/* -0.92729=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfed2558, 0xe9188de5, 0xbfe947ae, 0x147ae144},			/* -0.91080=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfeca11a, 0x353bd845, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.89466=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfec1f77, 0x7a9974eb, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.87884=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfeba042, 0xd36663d4, 0xbfe851eb, 0x851eb84e},			/* -0.86331=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfeb2353, 0x15c680d6, 0xbfe7ffff, 0xfffffffc},			/* -0.84806=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfeaa883, 0x2b0b051f, 0xbfe7ae14, 0x7ae147aa},			/* -0.83307=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfea2fb1, 0x83f1f795, 0xbfe75c28, 0xf5c28f58},			/* -0.81832=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe9b8bf, 0xa40885b7, 0xbfe70a3d, 0x70a3d706},			/* -0.80380=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe94391, 0xbfac8e45, 0xbfe6b851, 0xeb851eb4},			/* -0.78949=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe8d00e, 0x692afd8f, 0xbfe66666, 0x66666662},			/* -0.77539=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe85e1e, 0x4a3a04ec, 0xbfe6147a, 0xe147ae10},			/* -0.76148=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe7edab, 0xe7a11ff6, 0xbfe5c28f, 0x5c28f5be},			/* -0.74776=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe77ea3, 0x6d51891f, 0xbfe570a3, 0xd70a3d6c},			/* -0.73420=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe710f2, 0x8188f806, 0xbfe51eb8, 0x51eb851a},			/* -0.72081=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe6a488, 0x1ddc9b7c, 0xbfe4cccc, 0xccccccc8},			/* -0.70758=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe63954, 0x6d3fd534, 0xbfe47ae1, 0x47ae1476},			/* -0.69449=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe5cf48, 0xae44b71e, 0xbfe428f5, 0xc28f5c24},			/* -0.68155=f(-0.63000)*/
-{63, 0,123,__LINE__, 0xbfe56657, 0x18f62b90, 0xbfe3d70a, 0x3d70a3d2},			/* -0.66874=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe4fe72, 0xc7c6f173, 0xbfe3851e, 0xb851eb80},			/* -0.65606=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe4978f, 0xa3269eda, 0xbfe33333, 0x3333332e},			/* -0.64350=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe431a2, 0x4f5fc8de, 0xbfe2e147, 0xae147adc},			/* -0.63105=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe3cca0, 0x1c71184b, 0xbfe28f5c, 0x28f5c28a},			/* -0.61872=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe3687e, 0xf79f207e, 0xbfe23d70, 0xa3d70a38},			/* -0.60650=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe30535, 0x5e86c36c, 0xbfe1eb85, 0x1eb851e6},			/* -0.59438=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe2a2ba, 0x538032e9, 0xbfe19999, 0x99999994},			/* -0.58236=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe24105, 0x53298498, 0xbfe147ae, 0x147ae142},			/* -0.57043=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe1e00e, 0x4af594fc, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.55860=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe17fcd, 0x90a0d198, 0xbfe0a3d7, 0x0a3d709e},			/* -0.54685=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe1203b, 0xda719c32, 0xbfe051eb, 0x851eb84c},			/* -0.53518=f(-0.51000)*/
-{63, 0,123,__LINE__, 0xbfe0c152, 0x382d735f, 0xbfdfffff, 0xfffffff4},			/* -0.52359=f(-0.50000)*/
-{61, 0,123,__LINE__, 0xbfe0630a, 0x0caf0114, 0xbfdf5c28, 0xf5c28f50},			/* -0.51208=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfe0055d, 0x080bb62d, 0xbfdeb851, 0xeb851eac},			/* -0.50065=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfdf508a, 0x44738570, 0xbfde147a, 0xe147ae08},			/* -0.48929=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfde9779, 0x2c522bd2, 0xbfdd70a3, 0xd70a3d64},			/* -0.47799=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdddf7b, 0xba8753be, 0xbfdccccc, 0xccccccc0},			/* -0.46676=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdd2887, 0x569581bb, 0xbfdc28f5, 0xc28f5c1c},			/* -0.45559=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdc7291, 0xd50fd810, 0xbfdb851e, 0xb851eb78},			/* -0.44449=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdbbd91, 0x70937b71, 0xbfdae147, 0xae147ad4},			/* -0.43344=f(-0.42000)*/
-{60, 0,123,__LINE__, 0xbfdb097c, 0xc349e2b8, 0xbfda3d70, 0xa3d70a30},			/* -0.42245=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfda564a, 0xc0e73a24, 0xbfd99999, 0x9999998c},			/* -0.41151=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd9a3f2, 0xb11964dc, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.40063=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd8f26c, 0x2a5d5e0e, 0xbfd851eb, 0x851eb844},			/* -0.38979=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd841af, 0x0d31cc44, 0xbfd7ae14, 0x7ae147a0},			/* -0.37900=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd791b3, 0x7f9e8a16, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36826=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd6e271, 0xe909bbd5, 0xbfd66666, 0x66666658},			/* -0.35757=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd633e2, 0xee53c5a9, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34691=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd585ff, 0x6e341c2e, 0xbfd51eb8, 0x51eb8510},			/* -0.33630=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd4d8c0, 0x7dd17d6d, 0xbfd47ae1, 0x47ae146c},			/* -0.32572=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd42c1f, 0x6590a36d, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31519=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd38015, 0x9e14f6ef, 0xbfd33333, 0x33333324},			/* -0.30469=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd2d49c, 0xcd6f3123, 0xbfd28f5c, 0x28f5c280},			/* -0.29422=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd229ae, 0xc47638cc, 0xbfd1eb85, 0x1eb851dc},			/* -0.28379=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd17f45, 0x7c46da9a, 0xbfd147ae, 0x147ae138},			/* -0.27339=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd0d55b, 0x13e7479e, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26302=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfd02be9, 0xce0b87bd, 0xbfcfffff, 0xffffffe0},			/* -0.25268=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfcf05d8, 0x1df0951e, 0xbfceb851, 0xeb851e98},			/* -0.24236=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcdb4b8, 0xb5036e78, 0xbfcd70a3, 0xd70a3d50},			/* -0.23207=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcc646a, 0xa44819b8, 0xbfcc28f5, 0xc28f5c08},			/* -0.22181=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcb14e3, 0x666821d7, 0xbfcae147, 0xae147ac0},			/* -0.21157=f(-0.21000)*/
-{63, 0,123,__LINE__, 0xbfc9c618, 0xaa4ae21b, 0xbfc99999, 0x99999978},			/* -0.20135=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc87800, 0x4fcac25f, 0xbfc851eb, 0x851eb830},			/* -0.19116=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc72a90, 0x648fbf03, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18098=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5ddbf, 0x210c49be, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17082=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc49182, 0xe599c56f, 0xbfc47ae1, 0x47ae1458},			/* -0.16069=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc345d2, 0x37b20e8f, 0xbfc33333, 0x33333310},			/* -0.15056=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1faa3, 0xbf43ad16, 0xbfc1eb85, 0x1eb851c8},			/* -0.14046=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0afee, 0x441e734b, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13036=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbecb51, 0x56ece03e, 0xbfbeb851, 0xeb851e71},			/* -0.12028=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc3793, 0xeaf6762d, 0xbfbc28f5, 0xc28f5be2},			/* -0.11022=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb9a492, 0x7603783d, 0xbfb99999, 0x99999953},			/* -0.10016=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb7123b, 0x567d55f2, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09012=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb4807d, 0x13203146, 0xbfb47ae1, 0x47ae1435},			/* -0.08008=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1ef46, 0x56a8d246, 0xbfb1eb85, 0x1eb851a6},			/* -0.07005=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaebd0b, 0xd734d81c, 0xbfaeb851, 0xeb851e2d},			/* -0.06003=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99c55, 0x703285cd, 0xbfa99999, 0x9999990e},			/* -0.05002=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47c47, 0x73aebccd, 0xbfa47ae1, 0x47ae13ef},			/* -0.04001=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb980, 0x084226ee, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947b3a, 0xc64bdf81, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847af7, 0xa68f8cbd, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847af7, 0xa68f9121, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947b3a, 0xc64be1b3, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb980, 0x08422920, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47c47, 0x73aebde6, 0x3fa47ae1, 0x47ae1508},			/* 0.04001=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99c55, 0x703286e6, 0x3fa99999, 0x99999a27},			/* 0.05002=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faebd0b, 0xd734d935, 0x3faeb851, 0xeb851f46},			/* 0.06003=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1ef46, 0x56a8d2d3, 0x3fb1eb85, 0x1eb85232},			/* 0.07005=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb4807d, 0x132031d3, 0x3fb47ae1, 0x47ae14c1},			/* 0.08008=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb7123b, 0x567d567e, 0x3fb70a3d, 0x70a3d750},			/* 0.09012=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb9a492, 0x760378c9, 0x3fb99999, 0x999999df},			/* 0.10016=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc3793, 0xeaf676ba, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11022=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbecb51, 0x56ece0cb, 0x3fbeb851, 0xeb851efd},			/* 0.12028=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0afee, 0x441e7392, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13036=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1faa3, 0xbf43ad5d, 0x3fc1eb85, 0x1eb8520e},			/* 0.14046=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc345d2, 0x37b20ed6, 0x3fc33333, 0x33333356},			/* 0.15056=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc49182, 0xe599c5b6, 0x3fc47ae1, 0x47ae149e},			/* 0.16069=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5ddbf, 0x210c4a05, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17082=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc72a90, 0x648fbf4a, 0x3fc70a3d, 0x70a3d72e},			/* 0.18098=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc87800, 0x4fcac2a6, 0x3fc851eb, 0x851eb876},			/* 0.19116=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc9c618, 0xaa4ae262, 0x3fc99999, 0x999999be},			/* 0.20135=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcb14e3, 0x6668221e, 0x3fcae147, 0xae147b06},			/* 0.21157=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcc646a, 0xa44819ff, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22181=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcdb4b8, 0xb5036ec0, 0x3fcd70a3, 0xd70a3d96},			/* 0.23207=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fcf05d8, 0x1df09566, 0x3fceb851, 0xeb851ede},			/* 0.24236=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd02be9, 0xce0b87e1, 0x3fd00000, 0x00000013},			/* 0.25268=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd0d55b, 0x13e747c2, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26302=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd17f45, 0x7c46dabf, 0x3fd147ae, 0x147ae15b},			/* 0.27339=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd229ae, 0xc47638f1, 0x3fd1eb85, 0x1eb851ff},			/* 0.28379=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd2d49c, 0xcd6f3148, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29422=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd38015, 0x9e14f713, 0x3fd33333, 0x33333347},			/* 0.30469=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd42c1f, 0x6590a392, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31519=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd4d8c0, 0x7dd17d92, 0x3fd47ae1, 0x47ae148f},			/* 0.32572=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd585ff, 0x6e341c53, 0x3fd51eb8, 0x51eb8533},			/* 0.33630=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd633e2, 0xee53c5ce, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34691=f(0.34000)*/
-{63, 0,123,__LINE__, 0x3fd6e271, 0xe909bbfb, 0x3fd66666, 0x6666667b},			/* 0.35757=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd791b3, 0x7f9e8a3c, 0x3fd70a3d, 0x70a3d71f},			/* 0.36826=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd841af, 0x0d31cc69, 0x3fd7ae14, 0x7ae147c3},			/* 0.37900=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd8f26c, 0x2a5d5e34, 0x3fd851eb, 0x851eb867},			/* 0.38979=f(0.38000)*/
-{63, 0,123,__LINE__, 0x3fd9a3f2, 0xb1196503, 0x3fd8f5c2, 0x8f5c290b},			/* 0.40063=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fda564a, 0xc0e73a4b, 0x3fd99999, 0x999999af},			/* 0.41151=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fdb097c, 0xc349e2de, 0x3fda3d70, 0xa3d70a53},			/* 0.42245=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fdbbd91, 0x70937b97, 0x3fdae147, 0xae147af7},			/* 0.43344=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdc7291, 0xd50fd837, 0x3fdb851e, 0xb851eb9b},			/* 0.44449=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdd2887, 0x569581e2, 0x3fdc28f5, 0xc28f5c3f},			/* 0.45559=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdddf7b, 0xba8753e5, 0x3fdccccc, 0xcccccce3},			/* 0.46676=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fde9779, 0x2c522bfa, 0x3fdd70a3, 0xd70a3d87},			/* 0.47799=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdf508a, 0x44738598, 0x3fde147a, 0xe147ae2b},			/* 0.48929=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fe0055d, 0x080bb641, 0x3fdeb851, 0xeb851ecf},			/* 0.50065=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe0630a, 0x0caf0128, 0x3fdf5c28, 0xf5c28f73},			/* 0.51208=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe0c152, 0x382d7372, 0x3fe00000, 0x0000000b},			/* 0.52359=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe1203b, 0xda719c46, 0x3fe051eb, 0x851eb85d},			/* 0.53518=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe17fcd, 0x90a0d1ac, 0x3fe0a3d7, 0x0a3d70af},			/* 0.54685=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe1e00e, 0x4af59510, 0x3fe0f5c2, 0x8f5c2901},			/* 0.55860=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe24105, 0x532984ac, 0x3fe147ae, 0x147ae153},			/* 0.57043=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe2a2ba, 0x538032fd, 0x3fe19999, 0x999999a5},			/* 0.58236=f(0.55000)*/
-{63, 0,123,__LINE__, 0x3fe30535, 0x5e86c380, 0x3fe1eb85, 0x1eb851f7},			/* 0.59438=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe3687e, 0xf79f2092, 0x3fe23d70, 0xa3d70a49},			/* 0.60650=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe3cca0, 0x1c711860, 0x3fe28f5c, 0x28f5c29b},			/* 0.61872=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe431a2, 0x4f5fc8f3, 0x3fe2e147, 0xae147aed},			/* 0.63105=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe4978f, 0xa3269eef, 0x3fe33333, 0x3333333f},			/* 0.64350=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe4fe72, 0xc7c6f189, 0x3fe3851e, 0xb851eb91},			/* 0.65606=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe56657, 0x18f62ba7, 0x3fe3d70a, 0x3d70a3e3},			/* 0.66874=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe5cf48, 0xae44b733, 0x3fe428f5, 0xc28f5c35},			/* 0.68155=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe63954, 0x6d3fd54a, 0x3fe47ae1, 0x47ae1487},			/* 0.69449=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe6a488, 0x1ddc9b92, 0x3fe4cccc, 0xccccccd9},			/* 0.70758=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe710f2, 0x8188f81c, 0x3fe51eb8, 0x51eb852b},			/* 0.72081=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe77ea3, 0x6d518936, 0x3fe570a3, 0xd70a3d7d},			/* 0.73420=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe7edab, 0xe7a1200e, 0x3fe5c28f, 0x5c28f5cf},			/* 0.74776=f(0.68000)*/
-{63, 0,123,__LINE__, 0x3fe85e1e, 0x4a3a0502, 0x3fe6147a, 0xe147ae21},			/* 0.76148=f(0.69000)*/
-{63, 0,123,__LINE__, 0x3fe8d00e, 0x692afda6, 0x3fe66666, 0x66666673},			/* 0.77539=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe94391, 0xbfac8e5d, 0x3fe6b851, 0xeb851ec5},			/* 0.78949=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe9b8bf, 0xa40885cf, 0x3fe70a3d, 0x70a3d717},			/* 0.80380=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fea2fb1, 0x83f1f7af, 0x3fe75c28, 0xf5c28f69},			/* 0.81832=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3feaa883, 0x2b0b0538, 0x3fe7ae14, 0x7ae147bb},			/* 0.83307=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3feb2353, 0x15c680ef, 0x3fe80000, 0x0000000d},			/* 0.84806=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3feba042, 0xd36663ef, 0x3fe851eb, 0x851eb85f},			/* 0.86331=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fec1f77, 0x7a997507, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.87884=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3feca11a, 0x353bd860, 0x3fe8f5c2, 0x8f5c2903},			/* 0.89466=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fed2558, 0xe9188e00, 0x3fe947ae, 0x147ae155},			/* 0.91080=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fedac67, 0x0561bb65, 0x3fe99999, 0x999999a7},			/* 0.92729=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fee367e, 0x7f2129ab, 0x3fe9eb85, 0x1eb851f9},			/* 0.94415=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3feec3e1, 0x0a73634a, 0x3fea3d70, 0xa3d70a4b},			/* 0.96141=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fef54d9, 0xa373fae5, 0x3fea8f5c, 0x28f5c29d},			/* 0.97910=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fefe9be, 0x811df6e3, 0x3feae147, 0xae147aef},			/* 0.99728=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3ff04179, 0xcba26d1c, 0x3feb3333, 0x33333341},			/* 1.01598=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3ff09076, 0xee9d82c8, 0x3feb851e, 0xb851eb93},			/* 1.03527=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3ff0e21b, 0xd416ba24, 0x3febd70a, 0x3d70a3e5},			/* 1.05520=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3ff136bb, 0x485f3da0, 0x3fec28f5, 0xc28f5c37},			/* 1.07586=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3ff18eb9, 0xcef862e8, 0x3fec7ae1, 0x47ae1489},			/* 1.09734=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3ff1ea93, 0x705fa182, 0x3feccccc, 0xccccccdb},			/* 1.11977=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3ff24ae4, 0x3a7af15a, 0x3fed1eb8, 0x51eb852d},			/* 1.14328=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3ff2b075, 0x29b1749b, 0x3fed70a3, 0xd70a3d7f},			/* 1.16808=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3ff31c50, 0xa48f3a89, 0x3fedc28f, 0x5c28f5d1},			/* 1.19441=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3ff38fe4, 0xcb950b26, 0x3fee147a, 0xe147ae23},			/* 1.22263=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3ff40d41, 0x159f3421, 0x3fee6666, 0x66666675},			/* 1.25323=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3ff4978f, 0xa3269efb, 0x3feeb851, 0xeb851ec7},			/* 1.28700=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3ff53425, 0x38981ee6, 0x3fef0a3d, 0x70a3d719},			/* 1.32523=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3ff5ed69, 0x0583be2d, 0x3fef5c28, 0xf5c28f6b},			/* 1.37046=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3ff6de3c, 0x6f33d552, 0x3fefae14, 0x7ae147bd},			/* 1.42925=f(0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff00000, 0x00000007},			/* 64.0000=f(1.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{60, 0,123,__LINE__, 0x3fe4978f, 0xa3269e87, 0x3fe33333, 0x333332ec},			/* 0.64350=f(0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_asin(m)   {run_vector_1(m,asin_vec,(char *)(asin),"asin","dd");   }	
diff --git a/newlib/libm/test/asinf_vec.c b/newlib/libm/test/asinf_vec.c
deleted file mode 100644
index 7e1b271f2..000000000
--- a/newlib/libm/test/asinf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type asinf_vec[] = {
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{12, 0,123,__LINE__, 0xbff921fb, 0x60000000, 0xbfefffff, 0xfffffffe},			/* -1.57079=f(-0.01000)*/
-{11, 0,123,__LINE__, 0xbff6de3c, 0x80000000, 0xbfefae14, 0x7ae147ac},			/* -1.42925=f(-0.99000)*/
-{11, 0,123,__LINE__, 0xbff5ed69, 0x20000000, 0xbfef5c28, 0xf5c28f5a},			/* -1.37046=f(-0.98000)*/
-{11, 0,123,__LINE__, 0xbff53425, 0x60000000, 0xbfef0a3d, 0x70a3d708},			/* -1.32523=f(-0.97000)*/
-{11, 0,123,__LINE__, 0xbff4978f, 0xa0000000, 0xbfeeb851, 0xeb851eb6},			/* -1.28700=f(-0.96000)*/
-{11, 0,123,__LINE__, 0xbff40d41, 0x20000000, 0xbfee6666, 0x66666664},			/* -1.25323=f(-0.95000)*/
-{11, 0,123,__LINE__, 0xbff38fe4, 0xe0000000, 0xbfee147a, 0xe147ae12},			/* -1.22263=f(-0.94000)*/
-{11, 0,123,__LINE__, 0xbff31c50, 0xc0000000, 0xbfedc28f, 0x5c28f5c0},			/* -1.19441=f(-0.93000)*/
-{11, 0,123,__LINE__, 0xbff2b075, 0x40000000, 0xbfed70a3, 0xd70a3d6e},			/* -1.16808=f(-0.92000)*/
-{11, 0,123,__LINE__, 0xbff24ae4, 0x60000000, 0xbfed1eb8, 0x51eb851c},			/* -1.14328=f(-0.91000)*/
-{11, 0,123,__LINE__, 0xbff1ea93, 0x80000000, 0xbfeccccc, 0xccccccca},			/* -1.11977=f(-0.90000)*/
-{11, 0,123,__LINE__, 0xbff18eb9, 0xc0000000, 0xbfec7ae1, 0x47ae1478},			/* -1.09734=f(-0.89000)*/
-{11, 0,123,__LINE__, 0xbff136bb, 0x40000000, 0xbfec28f5, 0xc28f5c26},			/* -1.07586=f(-0.88000)*/
-{11, 0,123,__LINE__, 0xbff0e21b, 0xe0000000, 0xbfebd70a, 0x3d70a3d4},			/* -1.05520=f(-0.87000)*/
-{11, 0,123,__LINE__, 0xbff09077, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* -1.03527=f(-0.86000)*/
-{11, 0,123,__LINE__, 0xbff04179, 0xe0000000, 0xbfeb3333, 0x33333330},			/* -1.01598=f(-0.85000)*/
-{13, 0,123,__LINE__, 0xbfefe9be, 0x80000000, 0xbfeae147, 0xae147ade},			/* -0.99728=f(-0.84000)*/
-{13, 0,123,__LINE__, 0xbfef54d9, 0xc0000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.97910=f(-0.83000)*/
-{13, 0,123,__LINE__, 0xbfeec3e1, 0x20000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.96141=f(-0.82000)*/
-{13, 0,123,__LINE__, 0xbfee367e, 0xa0000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.94415=f(-0.81000)*/
-{13, 0,123,__LINE__, 0xbfedac67, 0x20000000, 0xbfe99999, 0x99999996},			/* -0.92729=f(-0.80000)*/
-{13, 0,123,__LINE__, 0xbfed2559, 0x20000000, 0xbfe947ae, 0x147ae144},			/* -0.91080=f(-0.79000)*/
-{13, 0,123,__LINE__, 0xbfeca11a, 0x20000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.89466=f(-0.78000)*/
-{13, 0,123,__LINE__, 0xbfec1f77, 0x80000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.87884=f(-0.77000)*/
-{14, 0,123,__LINE__, 0xbfeba043, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* -0.86331=f(-0.76000)*/
-{14, 0,123,__LINE__, 0xbfeb2353, 0x40000000, 0xbfe7ffff, 0xfffffffc},			/* -0.84806=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbfeaa883, 0x60000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.83307=f(-0.74000)*/
-{12, 0,123,__LINE__, 0xbfea2fb1, 0xa0000000, 0xbfe75c28, 0xf5c28f58},			/* -0.81832=f(-0.73000)*/
-{12, 0,123,__LINE__, 0xbfe9b8bf, 0xe0000000, 0xbfe70a3d, 0x70a3d706},			/* -0.80380=f(-0.72000)*/
-{12, 0,123,__LINE__, 0xbfe94391, 0xc0000000, 0xbfe6b851, 0xeb851eb4},			/* -0.78949=f(-0.71000)*/
-{12, 0,123,__LINE__, 0xbfe8d00e, 0x80000000, 0xbfe66666, 0x66666662},			/* -0.77539=f(-0.70000)*/
-{12, 0,123,__LINE__, 0xbfe85e1e, 0x60000000, 0xbfe6147a, 0xe147ae10},			/* -0.76148=f(-0.69000)*/
-{14, 0,123,__LINE__, 0xbfe7edac, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.74776=f(-0.68000)*/
-{14, 0,123,__LINE__, 0xbfe77ea3, 0xa0000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.73420=f(-0.67000)*/
-{14, 0,123,__LINE__, 0xbfe710f2, 0xc0000000, 0xbfe51eb8, 0x51eb851a},			/* -0.72081=f(-0.66000)*/
-{14, 0,123,__LINE__, 0xbfe6a488, 0x40000000, 0xbfe4cccc, 0xccccccc8},			/* -0.70758=f(-0.65000)*/
-{14, 0,123,__LINE__, 0xbfe63954, 0x80000000, 0xbfe47ae1, 0x47ae1476},			/* -0.69449=f(-0.64000)*/
-{15, 0,123,__LINE__, 0xbfe5cf48, 0xc0000000, 0xbfe428f5, 0xc28f5c24},			/* -0.68155=f(-0.63000)*/
-{13, 0,123,__LINE__, 0xbfe56657, 0x20000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.66874=f(-0.62000)*/
-{13, 0,123,__LINE__, 0xbfe4fe72, 0xe0000000, 0xbfe3851e, 0xb851eb80},			/* -0.65606=f(-0.61000)*/
-{13, 0,123,__LINE__, 0xbfe4978f, 0xc0000000, 0xbfe33333, 0x3333332e},			/* -0.64350=f(-0.60000)*/
-{13, 0,123,__LINE__, 0xbfe431a2, 0x40000000, 0xbfe2e147, 0xae147adc},			/* -0.63105=f(-0.59000)*/
-{15, 0,123,__LINE__, 0xbfe3cca0, 0x20000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.61872=f(-0.58000)*/
-{15, 0,123,__LINE__, 0xbfe3687f, 0x20000000, 0xbfe23d70, 0xa3d70a38},			/* -0.60650=f(-0.57000)*/
-{14, 0,123,__LINE__, 0xbfe30535, 0x60000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.59438=f(-0.56000)*/
-{14, 0,123,__LINE__, 0xbfe2a2ba, 0x80000000, 0xbfe19999, 0x99999994},			/* -0.58236=f(-0.55000)*/
-{14, 0,123,__LINE__, 0xbfe24105, 0x80000000, 0xbfe147ae, 0x147ae142},			/* -0.57043=f(-0.54000)*/
-{15, 0,123,__LINE__, 0xbfe1e00e, 0x40000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.55860=f(-0.53000)*/
-{15, 0,123,__LINE__, 0xbfe17fcd, 0x80000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.54685=f(-0.52000)*/
-{15, 0,123,__LINE__, 0xbfe1203c, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* -0.53518=f(-0.51000)*/
-{16, 0,123,__LINE__, 0xbfe0c152, 0x40000000, 0xbfdfffff, 0xfffffff4},			/* -0.52359=f(-0.50000)*/
-{10, 0,123,__LINE__, 0xbfe0630a, 0x20000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.51208=f(-0.49000)*/
-{10, 0,123,__LINE__, 0xbfe0055d, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* -0.50065=f(-0.48000)*/
-{15, 0,123,__LINE__, 0xbfdf508a, 0x40000000, 0xbfde147a, 0xe147ae08},			/* -0.48929=f(-0.47000)*/
-{14, 0,123,__LINE__, 0xbfde9779, 0x40000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.47799=f(-0.46000)*/
-{15, 0,123,__LINE__, 0xbfdddf7b, 0xa0000000, 0xbfdccccc, 0xccccccc0},			/* -0.46676=f(-0.45000)*/
-{15, 0,123,__LINE__, 0xbfdd2887, 0x60000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.45559=f(-0.44000)*/
-{13, 0,123,__LINE__, 0xbfdc7291, 0xe0000000, 0xbfdb851e, 0xb851eb78},			/* -0.44449=f(-0.43000)*/
-{15, 0,123,__LINE__, 0xbfdbbd91, 0x60000000, 0xbfdae147, 0xae147ad4},			/* -0.43344=f(-0.42000)*/
-{15, 0,123,__LINE__, 0xbfdb097c, 0xc0000000, 0xbfda3d70, 0xa3d70a30},			/* -0.42245=f(-0.41000)*/
-{14, 0,123,__LINE__, 0xbfda564a, 0xc0000000, 0xbfd99999, 0x9999998c},			/* -0.41151=f(-0.40000)*/
-{15, 0,123,__LINE__, 0xbfd9a3f2, 0xa0000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.40063=f(-0.39000)*/
-{16, 0,123,__LINE__, 0xbfd8f26c, 0x20000000, 0xbfd851eb, 0x851eb844},			/* -0.38979=f(-0.38000)*/
-{12, 0,123,__LINE__, 0xbfd841af, 0x20000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.37900=f(-0.37000)*/
-{16, 0,123,__LINE__, 0xbfd791b3, 0x80000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36826=f(-0.36000)*/
-{16, 0,123,__LINE__, 0xbfd6e271, 0xe0000000, 0xbfd66666, 0x66666658},			/* -0.35757=f(-0.35000)*/
-{14, 0,123,__LINE__, 0xbfd633e3, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34691=f(-0.34000)*/
-{16, 0,123,__LINE__, 0xbfd585ff, 0x80000000, 0xbfd51eb8, 0x51eb8510},			/* -0.33630=f(-0.33000)*/
-{16, 0,123,__LINE__, 0xbfd4d8c0, 0x80000000, 0xbfd47ae1, 0x47ae146c},			/* -0.32572=f(-0.32000)*/
-{13, 0,123,__LINE__, 0xbfd42c1f, 0x60000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31519=f(-0.31000)*/
-{16, 0,123,__LINE__, 0xbfd38015, 0xa0000000, 0xbfd33333, 0x33333324},			/* -0.30469=f(-0.30000)*/
-{17, 0,123,__LINE__, 0xbfd2d49c, 0xc0000000, 0xbfd28f5c, 0x28f5c280},			/* -0.29422=f(-0.29000)*/
-{14, 0,123,__LINE__, 0xbfd229ae, 0xc0000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.28379=f(-0.28000)*/
-{18, 0,123,__LINE__, 0xbfd17f45, 0x80000000, 0xbfd147ae, 0x147ae138},			/* -0.27339=f(-0.27000)*/
-{17, 0,123,__LINE__, 0xbfd0d55b, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26302=f(-0.26000)*/
-{18, 0,123,__LINE__, 0xbfd02be9, 0xc0000000, 0xbfcfffff, 0xffffffe0},			/* -0.25268=f(-0.25000)*/
-{15, 0,123,__LINE__, 0xbfcf05d8, 0x20000000, 0xbfceb851, 0xeb851e98},			/* -0.24236=f(-0.24000)*/
-{16, 0,123,__LINE__, 0xbfcdb4b8, 0xc0000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.23207=f(-0.23000)*/
-{17, 0,123,__LINE__, 0xbfcc646a, 0xa0000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.22181=f(-0.22000)*/
-{15, 0,123,__LINE__, 0xbfcb14e3, 0x60000000, 0xbfcae147, 0xae147ac0},			/* -0.21157=f(-0.21000)*/
-{17, 0,123,__LINE__, 0xbfc9c618, 0xc0000000, 0xbfc99999, 0x99999978},			/* -0.20135=f(-0.20000)*/
-{18, 0,123,__LINE__, 0xbfc87800, 0x40000000, 0xbfc851eb, 0x851eb830},			/* -0.19116=f(-0.19000)*/
-{18, 0,123,__LINE__, 0xbfc72a90, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18098=f(-0.18000)*/
-{19, 0,123,__LINE__, 0xbfc5ddbf, 0x20000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17082=f(-0.17000)*/
-{16, 0,123,__LINE__, 0xbfc49182, 0xe0000000, 0xbfc47ae1, 0x47ae1458},			/* -0.16069=f(-0.16000)*/
-{17, 0,123,__LINE__, 0xbfc345d2, 0x40000000, 0xbfc33333, 0x33333310},			/* -0.15056=f(-0.15000)*/
-{19, 0,123,__LINE__, 0xbfc1faa3, 0xc0000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.14046=f(-0.14000)*/
-{20, 0,123,__LINE__, 0xbfc0afee, 0x40000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13036=f(-0.13000)*/
-{17, 0,123,__LINE__, 0xbfbecb51, 0x40000000, 0xbfbeb851, 0xeb851e71},			/* -0.12028=f(-0.12000)*/
-{19, 0,123,__LINE__, 0xbfbc3793, 0xe0000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.11022=f(-0.11000)*/
-{18, 0,123,__LINE__, 0xbfb9a492, 0x80000000, 0xbfb99999, 0x99999953},			/* -0.10016=f(-0.00100)*/
-{19, 0,123,__LINE__, 0xbfb7123b, 0x60000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09012=f(-0.09000)*/
-{16, 0,123,__LINE__, 0xbfb4807d, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* -0.08008=f(-0.08000)*/
-{21, 0,123,__LINE__, 0xbfb1ef46, 0x60000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.07005=f(-0.07000)*/
-{21, 0,123,__LINE__, 0xbfaebd0b, 0xc0000000, 0xbfaeb851, 0xeb851e2d},			/* -0.06003=f(-0.06000)*/
-{21, 0,123,__LINE__, 0xbfa99c55, 0x80000000, 0xbfa99999, 0x9999990e},			/* -0.05002=f(-0.05000)*/
-{21, 0,123,__LINE__, 0xbfa47c47, 0x60000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.04001=f(-0.04000)*/
-{23, 0,123,__LINE__, 0xbf9eb980, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{23, 0,123,__LINE__, 0xbf947b3a, 0xc0000000, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{27, 0,123,__LINE__, 0xbf847af7, 0xa0000000, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{27, 0,123,__LINE__, 0x3f847af7, 0xa0000000, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{23, 0,123,__LINE__, 0x3f947b3a, 0xc0000000, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{23, 0,123,__LINE__, 0x3f9eb980, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{21, 0,123,__LINE__, 0x3fa47c47, 0x60000000, 0x3fa47ae1, 0x47ae1508},			/* 0.04001=f(0.04000)*/
-{21, 0,123,__LINE__, 0x3fa99c55, 0x80000000, 0x3fa99999, 0x99999a27},			/* 0.05002=f(0.05000)*/
-{21, 0,123,__LINE__, 0x3faebd0b, 0xc0000000, 0x3faeb851, 0xeb851f46},			/* 0.06003=f(0.06000)*/
-{21, 0,123,__LINE__, 0x3fb1ef46, 0x60000000, 0x3fb1eb85, 0x1eb85232},			/* 0.07005=f(0.07000)*/
-{16, 0,123,__LINE__, 0x3fb4807d, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.08008=f(0.08000)*/
-{19, 0,123,__LINE__, 0x3fb7123b, 0x60000000, 0x3fb70a3d, 0x70a3d750},			/* 0.09012=f(0.09000)*/
-{18, 0,123,__LINE__, 0x3fb9a492, 0x80000000, 0x3fb99999, 0x999999df},			/* 0.10016=f(0.10000)*/
-{19, 0,123,__LINE__, 0x3fbc3793, 0xe0000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11022=f(0.11000)*/
-{17, 0,123,__LINE__, 0x3fbecb51, 0x40000000, 0x3fbeb851, 0xeb851efd},			/* 0.12028=f(0.12000)*/
-{20, 0,123,__LINE__, 0x3fc0afee, 0x40000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13036=f(0.13000)*/
-{19, 0,123,__LINE__, 0x3fc1faa3, 0xc0000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.14046=f(0.14000)*/
-{17, 0,123,__LINE__, 0x3fc345d2, 0x40000000, 0x3fc33333, 0x33333356},			/* 0.15056=f(0.15000)*/
-{16, 0,123,__LINE__, 0x3fc49182, 0xe0000000, 0x3fc47ae1, 0x47ae149e},			/* 0.16069=f(0.16000)*/
-{19, 0,123,__LINE__, 0x3fc5ddbf, 0x20000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17082=f(0.17000)*/
-{18, 0,123,__LINE__, 0x3fc72a90, 0x80000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.18098=f(0.18000)*/
-{18, 0,123,__LINE__, 0x3fc87800, 0x40000000, 0x3fc851eb, 0x851eb876},			/* 0.19116=f(0.19000)*/
-{17, 0,123,__LINE__, 0x3fc9c618, 0xc0000000, 0x3fc99999, 0x999999be},			/* 0.20135=f(0.20000)*/
-{15, 0,123,__LINE__, 0x3fcb14e3, 0x60000000, 0x3fcae147, 0xae147b06},			/* 0.21157=f(0.21000)*/
-{17, 0,123,__LINE__, 0x3fcc646a, 0xa0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22181=f(0.22000)*/
-{16, 0,123,__LINE__, 0x3fcdb4b8, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.23207=f(0.23000)*/
-{15, 0,123,__LINE__, 0x3fcf05d8, 0x20000000, 0x3fceb851, 0xeb851ede},			/* 0.24236=f(0.24000)*/
-{18, 0,123,__LINE__, 0x3fd02be9, 0xc0000000, 0x3fd00000, 0x00000013},			/* 0.25268=f(0.25000)*/
-{17, 0,123,__LINE__, 0x3fd0d55b, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26302=f(0.26000)*/
-{18, 0,123,__LINE__, 0x3fd17f45, 0x80000000, 0x3fd147ae, 0x147ae15b},			/* 0.27339=f(0.27000)*/
-{14, 0,123,__LINE__, 0x3fd229ae, 0xc0000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.28379=f(0.28000)*/
-{17, 0,123,__LINE__, 0x3fd2d49c, 0xc0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29422=f(0.29000)*/
-{16, 0,123,__LINE__, 0x3fd38015, 0xa0000000, 0x3fd33333, 0x33333347},			/* 0.30469=f(0.30000)*/
-{13, 0,123,__LINE__, 0x3fd42c1f, 0x60000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31519=f(0.31000)*/
-{16, 0,123,__LINE__, 0x3fd4d8c0, 0x80000000, 0x3fd47ae1, 0x47ae148f},			/* 0.32572=f(0.32000)*/
-{16, 0,123,__LINE__, 0x3fd585ff, 0x80000000, 0x3fd51eb8, 0x51eb8533},			/* 0.33630=f(0.33000)*/
-{14, 0,123,__LINE__, 0x3fd633e3, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34691=f(0.34000)*/
-{16, 0,123,__LINE__, 0x3fd6e271, 0xe0000000, 0x3fd66666, 0x6666667b},			/* 0.35757=f(0.35000)*/
-{16, 0,123,__LINE__, 0x3fd791b3, 0x80000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.36826=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3fd841af, 0x20000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.37900=f(0.37000)*/
-{16, 0,123,__LINE__, 0x3fd8f26c, 0x20000000, 0x3fd851eb, 0x851eb867},			/* 0.38979=f(0.38000)*/
-{15, 0,123,__LINE__, 0x3fd9a3f2, 0xa0000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.40063=f(0.39000)*/
-{14, 0,123,__LINE__, 0x3fda564a, 0xc0000000, 0x3fd99999, 0x999999af},			/* 0.41151=f(0.40000)*/
-{15, 0,123,__LINE__, 0x3fdb097c, 0xc0000000, 0x3fda3d70, 0xa3d70a53},			/* 0.42245=f(0.41000)*/
-{15, 0,123,__LINE__, 0x3fdbbd91, 0x60000000, 0x3fdae147, 0xae147af7},			/* 0.43344=f(0.42000)*/
-{13, 0,123,__LINE__, 0x3fdc7291, 0xe0000000, 0x3fdb851e, 0xb851eb9b},			/* 0.44449=f(0.43000)*/
-{15, 0,123,__LINE__, 0x3fdd2887, 0x60000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.45559=f(0.44000)*/
-{15, 0,123,__LINE__, 0x3fdddf7b, 0xa0000000, 0x3fdccccc, 0xcccccce3},			/* 0.46676=f(0.45000)*/
-{14, 0,123,__LINE__, 0x3fde9779, 0x40000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.47799=f(0.46000)*/
-{15, 0,123,__LINE__, 0x3fdf508a, 0x40000000, 0x3fde147a, 0xe147ae2b},			/* 0.48929=f(0.47000)*/
-{10, 0,123,__LINE__, 0x3fe0055d, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 0.50065=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fe0630a, 0x20000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.51208=f(0.49000)*/
-{16, 0,123,__LINE__, 0x3fe0c152, 0x40000000, 0x3fe00000, 0x0000000b},			/* 0.52359=f(0.50000)*/
-{15, 0,123,__LINE__, 0x3fe1203c, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 0.53518=f(0.51000)*/
-{15, 0,123,__LINE__, 0x3fe17fcd, 0x80000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.54685=f(0.52000)*/
-{15, 0,123,__LINE__, 0x3fe1e00e, 0x40000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.55860=f(0.53000)*/
-{14, 0,123,__LINE__, 0x3fe24105, 0x80000000, 0x3fe147ae, 0x147ae153},			/* 0.57043=f(0.54000)*/
-{14, 0,123,__LINE__, 0x3fe2a2ba, 0x80000000, 0x3fe19999, 0x999999a5},			/* 0.58236=f(0.55000)*/
-{14, 0,123,__LINE__, 0x3fe30535, 0x60000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.59438=f(0.56000)*/
-{15, 0,123,__LINE__, 0x3fe3687f, 0x20000000, 0x3fe23d70, 0xa3d70a49},			/* 0.60650=f(0.57000)*/
-{15, 0,123,__LINE__, 0x3fe3cca0, 0x20000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.61872=f(0.58000)*/
-{13, 0,123,__LINE__, 0x3fe431a2, 0x40000000, 0x3fe2e147, 0xae147aed},			/* 0.63105=f(0.59000)*/
-{13, 0,123,__LINE__, 0x3fe4978f, 0xc0000000, 0x3fe33333, 0x3333333f},			/* 0.64350=f(0.60000)*/
-{13, 0,123,__LINE__, 0x3fe4fe72, 0xe0000000, 0x3fe3851e, 0xb851eb91},			/* 0.65606=f(0.61000)*/
-{13, 0,123,__LINE__, 0x3fe56657, 0x20000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.66874=f(0.62000)*/
-{15, 0,123,__LINE__, 0x3fe5cf48, 0xc0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.68155=f(0.63000)*/
-{14, 0,123,__LINE__, 0x3fe63954, 0x80000000, 0x3fe47ae1, 0x47ae1487},			/* 0.69449=f(0.64000)*/
-{14, 0,123,__LINE__, 0x3fe6a488, 0x40000000, 0x3fe4cccc, 0xccccccd9},			/* 0.70758=f(0.65000)*/
-{14, 0,123,__LINE__, 0x3fe710f2, 0xc0000000, 0x3fe51eb8, 0x51eb852b},			/* 0.72081=f(0.66000)*/
-{14, 0,123,__LINE__, 0x3fe77ea3, 0xa0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.73420=f(0.67000)*/
-{14, 0,123,__LINE__, 0x3fe7edac, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.74776=f(0.68000)*/
-{12, 0,123,__LINE__, 0x3fe85e1e, 0x60000000, 0x3fe6147a, 0xe147ae21},			/* 0.76148=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3fe8d00e, 0x80000000, 0x3fe66666, 0x66666673},			/* 0.77539=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3fe94391, 0xc0000000, 0x3fe6b851, 0xeb851ec5},			/* 0.78949=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3fe9b8bf, 0xe0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.80380=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3fea2fb1, 0xa0000000, 0x3fe75c28, 0xf5c28f69},			/* 0.81832=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3feaa883, 0x60000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.83307=f(0.74000)*/
-{14, 0,123,__LINE__, 0x3feb2353, 0x40000000, 0x3fe80000, 0x0000000d},			/* 0.84806=f(0.75000)*/
-{14, 0,123,__LINE__, 0x3feba043, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 0.86331=f(0.76000)*/
-{13, 0,123,__LINE__, 0x3fec1f77, 0x80000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.87884=f(0.77000)*/
-{13, 0,123,__LINE__, 0x3feca11a, 0x20000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.89466=f(0.78000)*/
-{13, 0,123,__LINE__, 0x3fed2559, 0x20000000, 0x3fe947ae, 0x147ae155},			/* 0.91080=f(0.79000)*/
-{13, 0,123,__LINE__, 0x3fedac67, 0x20000000, 0x3fe99999, 0x999999a7},			/* 0.92729=f(0.80000)*/
-{13, 0,123,__LINE__, 0x3fee367e, 0xa0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.94415=f(0.81000)*/
-{13, 0,123,__LINE__, 0x3feec3e1, 0x20000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.96141=f(0.82000)*/
-{13, 0,123,__LINE__, 0x3fef54d9, 0xc0000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.97910=f(0.83000)*/
-{13, 0,123,__LINE__, 0x3fefe9be, 0x80000000, 0x3feae147, 0xae147aef},			/* 0.99728=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3ff04179, 0xe0000000, 0x3feb3333, 0x33333341},			/* 1.01598=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3ff09077, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 1.03527=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3ff0e21b, 0xe0000000, 0x3febd70a, 0x3d70a3e5},			/* 1.05520=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3ff136bb, 0x40000000, 0x3fec28f5, 0xc28f5c37},			/* 1.07586=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3ff18eb9, 0xc0000000, 0x3fec7ae1, 0x47ae1489},			/* 1.09734=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3ff1ea93, 0x80000000, 0x3feccccc, 0xccccccdb},			/* 1.11977=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3ff24ae4, 0x60000000, 0x3fed1eb8, 0x51eb852d},			/* 1.14328=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3ff2b075, 0x40000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.16808=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3ff31c50, 0xc0000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.19441=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3ff38fe4, 0xe0000000, 0x3fee147a, 0xe147ae23},			/* 1.22263=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3ff40d41, 0x20000000, 0x3fee6666, 0x66666675},			/* 1.25323=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3ff4978f, 0xa0000000, 0x3feeb851, 0xeb851ec7},			/* 1.28700=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3ff53425, 0x60000000, 0x3fef0a3d, 0x70a3d719},			/* 1.32523=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3ff5ed69, 0x20000000, 0x3fef5c28, 0xf5c28f6b},			/* 1.37046=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3ff6de3c, 0x80000000, 0x3fefae14, 0x7ae147bd},			/* 1.42925=f(0.99000)*/
-{12, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0x3ff00000, 0x00000007},			/* 1.57079=f(1.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{13, 0,123,__LINE__, 0x3fe4978f, 0xc0000000, 0x3fe33333, 0x333332ec},			/* 0.64350=f(0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_asinf(m)   {run_vector_1(m,asinf_vec,(char *)(asinf),"asinf","ff");   }	
diff --git a/newlib/libm/test/asinh_vec.c b/newlib/libm/test/asinh_vec.c
deleted file mode 100644
index 67926d95b..000000000
--- a/newlib/libm/test/asinh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type asinh_vec[] = {
-{64, 0,123,__LINE__, 0xbff0416d, 0x0b8ea990, 0xbff33333, 0x33333333},			/* -1.01597=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbff02723, 0xaed3e28c, 0xbff30a3d, 0x70a3d70a},			/* -1.00955=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbff00cb9, 0x18514e77, 0xbff2e147, 0xae147ae1},			/* -1.00310=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xbfefe45a, 0x23bb819a, 0xbff2b851, 0xeb851eb8},			/* -0.99662=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbfefaefe, 0xcad19f15, 0xbff28f5c, 0x28f5c28f},			/* -0.99011=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfef795f, 0xba0209ba, 0xbff26666, 0x66666666},			/* -0.98356=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbfef437c, 0x85b4a6d2, 0xbff23d70, 0xa3d70a3d},			/* -0.97698=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbfef0d54, 0xc2a99e3a, 0xbff2147a, 0xe147ae14},			/* -0.97037=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbfeed6e8, 0x060758e3, 0xbff1eb85, 0x1eb851eb},			/* -0.96373=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfeea035, 0xe5691026, 0xbff1c28f, 0x5c28f5c2},			/* -0.95705=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfee693d, 0xf6edf1e5, 0xbff19999, 0x99999999},			/* -0.95034=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfee31ff, 0xd148dd59, 0xbff170a3, 0xd70a3d70},			/* -0.94360=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfedfa7b, 0x0bd0bc8a, 0xbff147ae, 0x147ae147},			/* -0.93682=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfedc2af, 0x3e917e7a, 0xbff11eb8, 0x51eb851e},			/* -0.93001=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfed8a9c, 0x025db5de, 0xbff0f5c2, 0x8f5c28f5},			/* -0.92317=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfed5240, 0xf0e0e077, 0xbff0cccc, 0xcccccccc},			/* -0.91629=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbfed199d, 0xa4b25ad8, 0xbff0a3d7, 0x0a3d70a3},			/* -0.90937=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbfece0b1, 0xb969049f, 0xbff07ae1, 0x47ae147a},			/* -0.90242=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfeca77c, 0xcbaf98d6, 0xbff051eb, 0x851eb851},			/* -0.89544=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbfec6dfe, 0x7959be65, 0xbff028f5, 0xc28f5c28},			/* -0.88842=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfec3436, 0x6179d425, 0xbfefffff, 0xfffffffe},			/* -0.88137=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfebfa24, 0x24777c61, 0xbfefae14, 0x7ae147ac},			/* -0.87428=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfebbfc7, 0x6426eb13, 0xbfef5c28, 0xf5c28f5a},			/* -0.86716=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfeb851f, 0xc3e0fa68, 0xbfef0a3d, 0x70a3d708},			/* -0.86000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfeb4a2c, 0xe89c08b3, 0xbfeeb851, 0xeb851eb6},			/* -0.85280=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfeb0eee, 0x7905a2fa, 0xbfee6666, 0x66666664},			/* -0.84557=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfead364, 0x1d9cfee2, 0xbfee147a, 0xe147ae12},			/* -0.83830=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfea978d, 0x80ce46dc, 0xbfedc28f, 0x5c28f5c0},			/* -0.83100=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfea5b6a, 0x4f0ebada, 0xbfed70a3, 0xd70a3d6e},			/* -0.82365=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfea1efa, 0x36f9a7f3, 0xbfed1eb8, 0x51eb851c},			/* -0.81628=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfe9e23c, 0xe96e38d2, 0xbfeccccc, 0xccccccca},			/* -0.80886=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfe9a532, 0x19ae208e, 0xbfec7ae1, 0x47ae1478},			/* -0.80141=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfe967d9, 0x7d7d215b, 0xbfec28f5, 0xc28f5c26},			/* -0.79392=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfe92a32, 0xcd416fe8, 0xbfebd70a, 0x3d70a3d4},			/* -0.78640=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfe8ec3d, 0xc424f41d, 0xbfeb851e, 0xb851eb82},			/* -0.77883=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfe8adfa, 0x2037673e, 0xbfeb3333, 0x33333330},			/* -0.77123=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfe86f67, 0xa2914f46, 0xbfeae147, 0xae147ade},			/* -0.76359=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfe83086, 0x0f77d693, 0xbfea8f5c, 0x28f5c28c},			/* -0.75592=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfe7f155, 0x2e817eac, 0xbfea3d70, 0xa3d70a3a},			/* -0.74820=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe7b1d4, 0xcabbac2a, 0xbfe9eb85, 0x1eb851e8},			/* -0.74045=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfe77204, 0xb2d1095d, 0xbfe99999, 0x99999996},			/* -0.73266=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe731e4, 0xb930bc87, 0xbfe947ae, 0x147ae144},			/* -0.72484=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe6f174, 0xb4366df1, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.71697=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe6b0b4, 0x7e531942, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.70907=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfe66fa3, 0xf636a4fb, 0xbfe851eb, 0x851eb84e},			/* -0.70112=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe62e42, 0xfefa39ec, 0xbfe7ffff, 0xfffffffc},			/* -0.69314=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe5ec91, 0x804b53dc, 0xbfe7ae14, 0x7ae147aa},			/* -0.68512=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe5aa8f, 0x66978381, 0xbfe75c28, 0xf5c28f58},			/* -0.67707=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe5683c, 0xa338d93d, 0xbfe70a3d, 0x70a3d706},			/* -0.66897=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe52599, 0x2ca2eee0, 0xbfe6b851, 0xeb851eb4},			/* -0.66083=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe4e2a4, 0xfe9085da, 0xbfe66666, 0x66666662},			/* -0.65266=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe49f60, 0x1a31ae2f, 0xbfe6147a, 0xe147ae10},			/* -0.64445=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe45bca, 0x865a6965, 0xbfe5c28f, 0x5c28f5be},			/* -0.63620=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe417e4, 0x4fb1bb94, 0xbfe570a3, 0xd70a3d6c},			/* -0.62791=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe3d3ad, 0x88e11b93, 0xbfe51eb8, 0x51eb851a},			/* -0.61958=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe38f26, 0x4ac4320f, 0xbfe4cccc, 0xccccccc8},			/* -0.61122=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe34a4e, 0xb498d62a, 0xbfe47ae1, 0x47ae1476},			/* -0.60282=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe30526, 0xec2f34f5, 0xbfe428f5, 0xc28f5c24},			/* -0.59437=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe2bfaf, 0x1e1a0fec, 0xbfe3d70a, 0x3d70a3d2},			/* -0.58589=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe279e7, 0x7ddefd46, 0xbfe3851e, 0xb851eb80},			/* -0.57738=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe233d0, 0x46269390, 0xbfe33333, 0x3333332e},			/* -0.56882=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe1ed69, 0xb8ec68f2, 0xbfe2e147, 0xae147adc},			/* -0.56023=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe1a6b4, 0x1faeccee, 0xbfe28f5c, 0x28f5c28a},			/* -0.55159=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe15faf, 0xcb9e2242, 0xbfe23d70, 0xa3d70a38},			/* -0.54293=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe1185d, 0x15cbbd57, 0xbfe1eb85, 0x1eb851e6},			/* -0.53422=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe0d0bc, 0x5f582a21, 0xbfe19999, 0x99999994},			/* -0.52548=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe088ce, 0x11a0bb69, 0xbfe147ae, 0x147ae142},			/* -0.51669=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe04092, 0x9e6c43fb, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.50788=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfdff015, 0x002db22e, 0xbfe0a3d7, 0x0a3d709e},			/* -0.49902=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfdf5e6c, 0x7378f8ec, 0xbfe051eb, 0x851eb84c},			/* -0.49013=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfdecc2c, 0xaec515ff, 0xbfdfffff, 0xfffffff4},			/* -0.48121=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfde3956, 0xdc3f98b0, 0xbfdf5c28, 0xf5c28f50},			/* -0.47224=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdda5ec, 0x3885fd17, 0xbfdeb851, 0xeb851eac},			/* -0.46325=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfdd11ee, 0x12ef7038, 0xbfde147a, 0xe147ae08},			/* -0.45421=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdc7d5d, 0xcdd2f44f, 0xbfdd70a3, 0xd70a3d64},			/* -0.44515=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdbe83c, 0xdec9972f, 0xbfdccccc, 0xccccccc0},			/* -0.43604=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdb528c, 0xceec6b8c, 0xbfdc28f5, 0xc28f5c1c},			/* -0.42691=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdabc4f, 0x3b0df56d, 0xbfdb851e, 0xb851eb78},			/* -0.41774=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfda2585, 0xd3eeb962, 0xbfdae147, 0xae147ad4},			/* -0.40854=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfd98e32, 0x5e6c9df0, 0xbfda3d70, 0xa3d70a30},			/* -0.39930=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd8f656, 0xb3acceca, 0xbfd99999, 0x9999998c},			/* -0.39003=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd85df4, 0xc13fd1f5, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.38073=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd7c50e, 0x893f7fd0, 0xbfd851eb, 0x851eb844},			/* -0.37140=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd72ba6, 0x22669021, 0xbfd7ae14, 0x7ae147a0},			/* -0.36203=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd691bd, 0xb8217006, 0xbfd70a3d, 0x70a3d6fc},			/* -0.35264=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd5f757, 0x8a9816c0, 0xbfd66666, 0x66666658},			/* -0.34322=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd55c75, 0xeeb091a1, 0xbfd5c28f, 0x5c28f5b4},			/* -0.33376=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd4c11b, 0x4e0a028a, 0xbfd51eb8, 0x51eb8510},			/* -0.32428=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd4254a, 0x26efcfab, 0xbfd47ae1, 0x47ae146c},			/* -0.31477=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd38905, 0x0c44c709, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30523=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd2ec4e, 0xa565fcb3, 0xbfd33333, 0x33333324},			/* -0.29567=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd24f29, 0xae052f2f, 0xbfd28f5c, 0x28f5c280},			/* -0.28608=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd1b198, 0xf5fa8300, 0xbfd1eb85, 0x1eb851dc},			/* -0.27646=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd1139f, 0x610d6ba0, 0xbfd147ae, 0x147ae138},			/* -0.26682=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd0753f, 0xe6b49e7e, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25715=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfcfacfb, 0x2399e618, 0xbfcfffff, 0xffffffe0},			/* -0.24746=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfce6eb7, 0x008e3359, 0xbfceb851, 0xeb851e98},			/* -0.23775=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcd2fb9, 0xc5983561, 0xbfcd70a3, 0xd70a3d50},			/* -0.22801=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcbf009, 0xf8b12c56, 0xbfcc28f5, 0xc28f5c08},			/* -0.21826=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcaafae, 0x439d8a6b, 0xbfcae147, 0xae147ac0},			/* -0.20848=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc96ead, 0x72fe8b12, 0xbfc99999, 0x99999978},			/* -0.19869=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc82d0e, 0x7551814f, 0xbfc851eb, 0x851eb830},			/* -0.18887=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc6ead8, 0x59dd1101, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17904=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5a812, 0x4f8c9853, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16919=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc464c3, 0xa3ba2071, 0xbfc47ae1, 0x47ae1458},			/* -0.15932=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc320f3, 0xc0e73e3a, 0xbfc33333, 0x33333310},			/* -0.14944=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1dcaa, 0x2d655d91, 0xbfc1eb85, 0x1eb851c8},			/* -0.13954=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc097ee, 0x89ee0391, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12963=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbea591, 0x20574a8c, 0xbfbeb851, 0xeb851e71},			/* -0.11971=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc1a80, 0x22678345, 0xbfbc28f5, 0xc28f5be2},			/* -0.10977=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb98eb9, 0xe7e5fbf8, 0xbfb99999, 0x99999953},			/* -0.09983=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb7024e, 0x67182895, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08987=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb4754d, 0xbb54e357, 0xbfb47ae1, 0x47ae1435},			/* -0.07991=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1e7c8, 0x2192e439, 0xbfb1eb85, 0x1eb851a6},			/* -0.06994=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeb39b, 0xe9c4cf8a, 0xbfaeb851, 0xeb851e2d},			/* -0.05996=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa996df, 0x55a82630, 0xbfa99999, 0x9999990e},			/* -0.04997=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa4797b, 0x9f9e7351, 0xbfa47ae1, 0x47ae13ef},			/* -0.03998=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb724, 0x0d66f6d4, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947a87, 0xd14f5740, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847aca, 0xe95088d5, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847aca, 0xe9508d39, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947a87, 0xd14f5972, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb724, 0x0d66f906, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa4797b, 0x9f9e746a, 0x3fa47ae1, 0x47ae1508},			/* 0.03998=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa996df, 0x55a82748, 0x3fa99999, 0x99999a27},			/* 0.04997=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faeb39b, 0xe9c4d0a3, 0x3faeb851, 0xeb851f46},			/* 0.05996=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1e7c8, 0x2192e4c5, 0x3fb1eb85, 0x1eb85232},			/* 0.06994=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb4754d, 0xbb54e3e3, 0x3fb47ae1, 0x47ae14c1},			/* 0.07991=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb7024e, 0x67182921, 0x3fb70a3d, 0x70a3d750},			/* 0.08987=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb98eb9, 0xe7e5fc83, 0x3fb99999, 0x999999df},			/* 0.09983=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc1a80, 0x226783d0, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10977=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbea591, 0x20574b16, 0x3fbeb851, 0xeb851efd},			/* 0.11971=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc097ee, 0x89ee03d6, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12963=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1dcaa, 0x2d655dd5, 0x3fc1eb85, 0x1eb8520e},			/* 0.13954=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc320f3, 0xc0e73e7f, 0x3fc33333, 0x33333356},			/* 0.14944=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc464c3, 0xa3ba20b7, 0x3fc47ae1, 0x47ae149e},			/* 0.15932=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5a812, 0x4f8c9898, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16919=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc6ead8, 0x59dd1146, 0x3fc70a3d, 0x70a3d72e},			/* 0.17904=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc82d0e, 0x75518194, 0x3fc851eb, 0x851eb876},			/* 0.18887=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc96ead, 0x72fe8b56, 0x3fc99999, 0x999999be},			/* 0.19869=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcaafae, 0x439d8ab0, 0x3fcae147, 0xae147b06},			/* 0.20848=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcbf009, 0xf8b12c9a, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21826=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcd2fb9, 0xc59835a6, 0x3fcd70a3, 0xd70a3d96},			/* 0.22801=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fce6eb7, 0x008e339d, 0x3fceb851, 0xeb851ede},			/* 0.23775=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fcfacfb, 0x2399e65d, 0x3fd00000, 0x00000013},			/* 0.24746=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd0753f, 0xe6b49e9f, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25715=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd1139f, 0x610d6bc1, 0x3fd147ae, 0x147ae15b},			/* 0.26682=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd1b198, 0xf5fa8322, 0x3fd1eb85, 0x1eb851ff},			/* 0.27646=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd24f29, 0xae052f50, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28608=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd2ec4e, 0xa565fcd4, 0x3fd33333, 0x33333347},			/* 0.29567=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd38905, 0x0c44c72a, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30523=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd4254a, 0x26efcfcc, 0x3fd47ae1, 0x47ae148f},			/* 0.31477=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd4c11b, 0x4e0a02ab, 0x3fd51eb8, 0x51eb8533},			/* 0.32428=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd55c75, 0xeeb091c2, 0x3fd5c28f, 0x5c28f5d7},			/* 0.33376=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd5f757, 0x8a9816e1, 0x3fd66666, 0x6666667b},			/* 0.34322=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd691bd, 0xb8217026, 0x3fd70a3d, 0x70a3d71f},			/* 0.35264=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd72ba6, 0x22669042, 0x3fd7ae14, 0x7ae147c3},			/* 0.36203=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd7c50e, 0x893f7ff1, 0x3fd851eb, 0x851eb867},			/* 0.37140=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd85df4, 0xc13fd215, 0x3fd8f5c2, 0x8f5c290b},			/* 0.38073=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd8f656, 0xb3acceea, 0x3fd99999, 0x999999af},			/* 0.39003=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fd98e32, 0x5e6c9e11, 0x3fda3d70, 0xa3d70a53},			/* 0.39930=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fda2585, 0xd3eeb982, 0x3fdae147, 0xae147af7},			/* 0.40854=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdabc4f, 0x3b0df58c, 0x3fdb851e, 0xb851eb9b},			/* 0.41774=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdb528c, 0xceec6bac, 0x3fdc28f5, 0xc28f5c3f},			/* 0.42691=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdbe83c, 0xdec9974f, 0x3fdccccc, 0xcccccce3},			/* 0.43604=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdc7d5d, 0xcdd2f46f, 0x3fdd70a3, 0xd70a3d87},			/* 0.44515=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdd11ee, 0x12ef7057, 0x3fde147a, 0xe147ae2b},			/* 0.45421=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdda5ec, 0x3885fd36, 0x3fdeb851, 0xeb851ecf},			/* 0.46325=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fde3956, 0xdc3f98d0, 0x3fdf5c28, 0xf5c28f73},			/* 0.47224=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fdecc2c, 0xaec5161c, 0x3fe00000, 0x0000000b},			/* 0.48121=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fdf5e6c, 0x7378f90c, 0x3fe051eb, 0x851eb85d},			/* 0.49013=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fdff015, 0x002db24d, 0x3fe0a3d7, 0x0a3d70af},			/* 0.49902=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe04092, 0x9e6c440a, 0x3fe0f5c2, 0x8f5c2901},			/* 0.50788=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe088ce, 0x11a0bb78, 0x3fe147ae, 0x147ae153},			/* 0.51669=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe0d0bc, 0x5f582a30, 0x3fe19999, 0x999999a5},			/* 0.52548=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe1185d, 0x15cbbd66, 0x3fe1eb85, 0x1eb851f7},			/* 0.53422=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe15faf, 0xcb9e2251, 0x3fe23d70, 0xa3d70a49},			/* 0.54293=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe1a6b4, 0x1faeccfc, 0x3fe28f5c, 0x28f5c29b},			/* 0.55159=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe1ed69, 0xb8ec6901, 0x3fe2e147, 0xae147aed},			/* 0.56023=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe233d0, 0x4626939e, 0x3fe33333, 0x3333333f},			/* 0.56882=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe279e7, 0x7ddefd54, 0x3fe3851e, 0xb851eb91},			/* 0.57738=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe2bfaf, 0x1e1a0ffb, 0x3fe3d70a, 0x3d70a3e3},			/* 0.58589=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe30526, 0xec2f3503, 0x3fe428f5, 0xc28f5c35},			/* 0.59437=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe34a4e, 0xb498d638, 0x3fe47ae1, 0x47ae1487},			/* 0.60282=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe38f26, 0x4ac4321d, 0x3fe4cccc, 0xccccccd9},			/* 0.61122=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe3d3ad, 0x88e11ba1, 0x3fe51eb8, 0x51eb852b},			/* 0.61958=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe417e4, 0x4fb1bba2, 0x3fe570a3, 0xd70a3d7d},			/* 0.62791=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe45bca, 0x865a6973, 0x3fe5c28f, 0x5c28f5cf},			/* 0.63620=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe49f60, 0x1a31ae3d, 0x3fe6147a, 0xe147ae21},			/* 0.64445=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe4e2a4, 0xfe9085e8, 0x3fe66666, 0x66666673},			/* 0.65266=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe52599, 0x2ca2eeee, 0x3fe6b851, 0xeb851ec5},			/* 0.66083=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe5683c, 0xa338d94b, 0x3fe70a3d, 0x70a3d717},			/* 0.66897=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe5aa8f, 0x6697838f, 0x3fe75c28, 0xf5c28f69},			/* 0.67707=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe5ec91, 0x804b53e9, 0x3fe7ae14, 0x7ae147bb},			/* 0.68512=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe62e42, 0xfefa39f9, 0x3fe80000, 0x0000000d},			/* 0.69314=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe66fa3, 0xf636a508, 0x3fe851eb, 0x851eb85f},			/* 0.70112=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe6b0b4, 0x7e53194f, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.70907=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe6f174, 0xb4366dff, 0x3fe8f5c2, 0x8f5c2903},			/* 0.71697=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe731e4, 0xb930bc95, 0x3fe947ae, 0x147ae155},			/* 0.72484=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe77204, 0xb2d1096a, 0x3fe99999, 0x999999a7},			/* 0.73266=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe7b1d4, 0xcabbac37, 0x3fe9eb85, 0x1eb851f9},			/* 0.74045=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe7f155, 0x2e817eba, 0x3fea3d70, 0xa3d70a4b},			/* 0.74820=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe83086, 0x0f77d6a0, 0x3fea8f5c, 0x28f5c29d},			/* 0.75592=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe86f67, 0xa2914f53, 0x3feae147, 0xae147aef},			/* 0.76359=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe8adfa, 0x2037674b, 0x3feb3333, 0x33333341},			/* 0.77123=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe8ec3d, 0xc424f42a, 0x3feb851e, 0xb851eb93},			/* 0.77883=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe92a32, 0xcd416ff5, 0x3febd70a, 0x3d70a3e5},			/* 0.78640=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe967d9, 0x7d7d2167, 0x3fec28f5, 0xc28f5c37},			/* 0.79392=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe9a532, 0x19ae209b, 0x3fec7ae1, 0x47ae1489},			/* 0.80141=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe9e23c, 0xe96e38df, 0x3feccccc, 0xccccccdb},			/* 0.80886=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fea1efa, 0x36f9a800, 0x3fed1eb8, 0x51eb852d},			/* 0.81628=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fea5b6a, 0x4f0ebae6, 0x3fed70a3, 0xd70a3d7f},			/* 0.82365=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fea978d, 0x80ce46e8, 0x3fedc28f, 0x5c28f5d1},			/* 0.83100=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fead364, 0x1d9cfef0, 0x3fee147a, 0xe147ae23},			/* 0.83830=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3feb0eee, 0x7905a306, 0x3fee6666, 0x66666675},			/* 0.84557=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3feb4a2c, 0xe89c08bf, 0x3feeb851, 0xeb851ec7},			/* 0.85280=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3feb851f, 0xc3e0fa73, 0x3fef0a3d, 0x70a3d719},			/* 0.86000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3febbfc7, 0x6426eb20, 0x3fef5c28, 0xf5c28f6b},			/* 0.86716=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3febfa24, 0x24777c6e, 0x3fefae14, 0x7ae147bd},			/* 0.87428=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fec3436, 0x6179d430, 0x3ff00000, 0x00000007},			/* 0.88137=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fec6dfe, 0x7959be70, 0x3ff028f5, 0xc28f5c30},			/* 0.88842=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3feca77c, 0xcbaf98e2, 0x3ff051eb, 0x851eb859},			/* 0.89544=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fece0b1, 0xb96904aa, 0x3ff07ae1, 0x47ae1482},			/* 0.90242=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fed199d, 0xa4b25ae3, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.90937=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fed5240, 0xf0e0e081, 0x3ff0cccc, 0xccccccd4},			/* 0.91629=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fed8a9c, 0x025db5e9, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.92317=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fedc2af, 0x3e917e85, 0x3ff11eb8, 0x51eb8526},			/* 0.93001=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fedfa7b, 0x0bd0bc95, 0x3ff147ae, 0x147ae14f},			/* 0.93682=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fee31ff, 0xd148dd64, 0x3ff170a3, 0xd70a3d78},			/* 0.94360=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fee693d, 0xf6edf1f0, 0x3ff19999, 0x999999a1},			/* 0.95034=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3feea035, 0xe5691030, 0x3ff1c28f, 0x5c28f5ca},			/* 0.95705=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3feed6e8, 0x060758ed, 0x3ff1eb85, 0x1eb851f3},			/* 0.96373=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fef0d54, 0xc2a99e45, 0x3ff2147a, 0xe147ae1c},			/* 0.97037=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fef437c, 0x85b4a6dc, 0x3ff23d70, 0xa3d70a45},			/* 0.97698=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fef795f, 0xba0209c4, 0x3ff26666, 0x6666666e},			/* 0.98356=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fefaefe, 0xcad19f20, 0x3ff28f5c, 0x28f5c297},			/* 0.99011=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fefe45a, 0x23bb81a4, 0x3ff2b851, 0xeb851ec0},			/* 0.99662=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3ff00cb9, 0x18514e7c, 0x3ff2e147, 0xae147ae9},			/* 1.00310=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3ff02723, 0xaed3e291, 0x3ff30a3d, 0x70a3d712},			/* 1.00955=f(1.19000)*/
-{64, 0,123,__LINE__, 0xc0044c62, 0xa1e4f804, 0xc01921fb, 0x54442d18},			/* -2.53729=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xc002090a, 0x84a43b1b, 0xc012d97c, 0x7f3321d2},			/* -2.25441=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xbffdcbf6, 0x9f10006d, 0xc00921fb, 0x54442d18},			/* -1.86229=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xbff3bc04, 0xe847ec05, 0xbff921fb, 0x54442d18},			/* -1.23340=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff3bc04, 0xe847ec05, 0x3ff921fb, 0x54442d18},			/* 1.23340=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ffdcbf6, 0x9f10006d, 0x400921fb, 0x54442d18},			/* 1.86229=f(3.14159)*/
-{64, 0,123,__LINE__, 0x4002090a, 0x84a43b1b, 0x4012d97c, 0x7f3321d2},			/* 2.25441=f(4.71238)*/
-{64, 0,123,__LINE__, 0xc01060e4, 0xa5fbe5ca, 0xc03e0000, 0x00000000},			/* -4.09462=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xc0102531, 0x54812870, 0xc03c4ccc, 0xcccccccd},			/* -4.03632=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xc00fcb98, 0x4685405f, 0xc03a9999, 0x9999999a},			/* -3.97441=f(-26.6000)*/
-{64, 0,123,__LINE__, 0xc00f4470, 0xa29f290c, 0xc038e666, 0x66666667},			/* -3.90841=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xc00eb3bd, 0x68b50b69, 0xc0373333, 0x33333334},			/* -3.83776=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xc00e180b, 0x68a00467, 0xc0358000, 0x00000001},			/* -3.76174=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xc00d6f8b, 0xf981cc3a, 0xc033cccc, 0xccccccce},			/* -3.67946=f(-19.8000)*/
-{64, 0,123,__LINE__, 0xc00cb7f4, 0x416d82e3, 0xc0321999, 0x9999999b},			/* -3.58982=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xc00bee4c, 0x6fb6e99b, 0xc0306666, 0x66666668},			/* -3.49135=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xc00b0ea4, 0x72aedff4, 0xc02d6666, 0x6666666a},			/* -3.38215=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xc00a139a, 0xc6c0b4fc, 0xc02a0000, 0x00000004},			/* -3.25957=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xc008f58f, 0x34777dd3, 0xc0269999, 0x9999999e},			/* -3.11990=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xc007a930, 0x785ee482, 0xc0233333, 0x33333338},			/* -2.95761=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xc0061ca7, 0xc27714a7, 0xc01f9999, 0x999999a3},			/* -2.76399=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xc004316f, 0x09d4ec2c, 0xc018cccc, 0xccccccd6},			/* -2.52413=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xc001acbe, 0x7dcff697, 0xc0120000, 0x00000009},			/* -2.20934=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbffc0d39, 0xbf8abae7, 0xc0066666, 0x66666678},			/* -1.75322=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbfee693d, 0xf6edf216, 0xbff19999, 0x999999bd},			/* -0.95034=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe233d0, 0x46269357, 0x3fe33333, 0x333332ec},			/* 0.56882=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff91fdc, 0x64de0e42, 0x40026666, 0x66666654},			/* 1.57027=f(2.30000)*/
-{64, 0,123,__LINE__, 0x4000c1f8, 0xa6e80ee7, 0x400fffff, 0xffffffee},			/* 2.09471=f(4.00000)*/
-{64, 0,123,__LINE__, 0x4003879e, 0xb8dfd8bc, 0x4016cccc, 0xccccccc4},			/* 2.44122=f(5.70000)*/
-{64, 0,123,__LINE__, 0x400597e2, 0x0a50c554, 0x401d9999, 0x99999991},			/* 2.69916=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40073c44, 0x35744319, 0x40223333, 0x3333332f},			/* 2.90442=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40089940, 0x5e357d29, 0x40259999, 0x99999995},			/* 3.07483=f(10.8000)*/
-{64, 0,123,__LINE__, 0x4009c386, 0xd2b8b56c, 0x4028ffff, 0xfffffffb},			/* 3.22047=f(12.5000)*/
-{64, 0,123,__LINE__, 0x400ac7f0, 0x7f0f1e89, 0x402c6666, 0x66666661},			/* 3.34762=f(14.2000)*/
-{64, 0,123,__LINE__, 0x400baf02, 0x5af3c784, 0x402fcccc, 0xccccccc7},			/* 3.46045=f(15.9000)*/
-{64, 0,123,__LINE__, 0x400c7eac, 0x5b92cf44, 0x40319999, 0x99999997},			/* 3.56185=f(17.6000)*/
-{64, 0,123,__LINE__, 0x400d3b3b, 0xdb3c5660, 0x40334ccc, 0xccccccca},			/* 3.65392=f(19.3000)*/
-{64, 0,123,__LINE__, 0x400de7e8, 0x4ab59e16, 0x4034ffff, 0xfffffffd},			/* 3.73823=f(21.0000)*/
-{64, 0,123,__LINE__, 0x400e8729, 0x64206f74, 0x4036b333, 0x33333330},			/* 3.81599=f(22.7000)*/
-{64, 0,123,__LINE__, 0x400f1aee, 0x5e1b0559, 0x40386666, 0x66666663},			/* 3.88815=f(24.4000)*/
-{64, 0,123,__LINE__, 0x400fa4c2, 0x9886fc48, 0x403a1999, 0x99999996},			/* 3.95544=f(26.1000)*/
-{64, 0,123,__LINE__, 0x401012f3, 0x5ffa8bd3, 0x403bcccc, 0xccccccc9},			/* 4.01850=f(27.8000)*/
-{64, 0,123,__LINE__, 0x40104fb1, 0x4017a7cb, 0x403d7fff, 0xfffffffc},			/* 4.07782=f(29.5000)*/
-0,};
-test_asinh(m)   {run_vector_1(m,asinh_vec,(char *)(asinh),"asinh","dd");   }	
diff --git a/newlib/libm/test/asinhf_vec.c b/newlib/libm/test/asinhf_vec.c
deleted file mode 100644
index d4b85eb92..000000000
--- a/newlib/libm/test/asinhf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type asinhf_vec[] = {
-{14, 0,123,__LINE__, 0xbff0416d, 0x20000000, 0xbff33333, 0x33333333},			/* -1.01597=f(-1.20000)*/
-{14, 0,123,__LINE__, 0xbff02723, 0xa0000000, 0xbff30a3d, 0x70a3d70a},			/* -1.00955=f(-1.19000)*/
-{14, 0,123,__LINE__, 0xbff00cb9, 0x00000000, 0xbff2e147, 0xae147ae1},			/* -1.00310=f(-1.18000)*/
-{11, 0,123,__LINE__, 0xbfefe45a, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -0.99662=f(-1.17000)*/
-{11, 0,123,__LINE__, 0xbfefaefe, 0xc0000000, 0xbff28f5c, 0x28f5c28f},			/* -0.99011=f(-1.16000)*/
-{11, 0,123,__LINE__, 0xbfef795f, 0xa0000000, 0xbff26666, 0x66666666},			/* -0.98356=f(-1.15000)*/
-{11, 0,123,__LINE__, 0xbfef437c, 0x80000000, 0xbff23d70, 0xa3d70a3d},			/* -0.97698=f(-1.14000)*/
-{11, 0,123,__LINE__, 0xbfef0d54, 0xc0000000, 0xbff2147a, 0xe147ae14},			/* -0.97037=f(-1.13000)*/
-{11, 0,123,__LINE__, 0xbfeed6e8, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -0.96373=f(-1.12000)*/
-{11, 0,123,__LINE__, 0xbfeea035, 0xe0000000, 0xbff1c28f, 0x5c28f5c2},			/* -0.95705=f(-1.11000)*/
-{11, 0,123,__LINE__, 0xbfee693d, 0xe0000000, 0xbff19999, 0x99999999},			/* -0.95034=f(-1.10000)*/
-{11, 0,123,__LINE__, 0xbfee31ff, 0xe0000000, 0xbff170a3, 0xd70a3d70},			/* -0.94360=f(-1.09000)*/
-{11, 0,123,__LINE__, 0xbfedfa7b, 0x20000000, 0xbff147ae, 0x147ae147},			/* -0.93682=f(-1.08000)*/
-{11, 0,123,__LINE__, 0xbfedc2af, 0x40000000, 0xbff11eb8, 0x51eb851e},			/* -0.93001=f(-1.07000)*/
-{11, 0,123,__LINE__, 0xbfed8a9b, 0xe0000000, 0xbff0f5c2, 0x8f5c28f5},			/* -0.92317=f(-1.06000)*/
-{11, 0,123,__LINE__, 0xbfed5240, 0xe0000000, 0xbff0cccc, 0xcccccccc},			/* -0.91629=f(-1.05000)*/
-{11, 0,123,__LINE__, 0xbfed199d, 0xa0000000, 0xbff0a3d7, 0x0a3d70a3},			/* -0.90937=f(-1.04000)*/
-{11, 0,123,__LINE__, 0xbfece0b1, 0xa0000000, 0xbff07ae1, 0x47ae147a},			/* -0.90242=f(-1.03000)*/
-{11, 0,123,__LINE__, 0xbfeca77c, 0xc0000000, 0xbff051eb, 0x851eb851},			/* -0.89544=f(-1.02000)*/
-{11, 0,123,__LINE__, 0xbfec6dfe, 0x60000000, 0xbff028f5, 0xc28f5c28},			/* -0.88842=f(-1.01000)*/
-{14, 0,123,__LINE__, 0xbfec3436, 0x60000000, 0xbfefffff, 0xfffffffe},			/* -0.88137=f(-0.01000)*/
-{13, 0,123,__LINE__, 0xbfebfa24, 0x20000000, 0xbfefae14, 0x7ae147ac},			/* -0.87428=f(-0.99000)*/
-{13, 0,123,__LINE__, 0xbfebbfc7, 0x80000000, 0xbfef5c28, 0xf5c28f5a},			/* -0.86716=f(-0.98000)*/
-{13, 0,123,__LINE__, 0xbfeb851f, 0xc0000000, 0xbfef0a3d, 0x70a3d708},			/* -0.86000=f(-0.97000)*/
-{13, 0,123,__LINE__, 0xbfeb4a2c, 0xe0000000, 0xbfeeb851, 0xeb851eb6},			/* -0.85280=f(-0.96000)*/
-{13, 0,123,__LINE__, 0xbfeb0eee, 0x60000000, 0xbfee6666, 0x66666664},			/* -0.84557=f(-0.95000)*/
-{13, 0,123,__LINE__, 0xbfead364, 0x00000000, 0xbfee147a, 0xe147ae12},			/* -0.83830=f(-0.94000)*/
-{13, 0,123,__LINE__, 0xbfea978d, 0x80000000, 0xbfedc28f, 0x5c28f5c0},			/* -0.83100=f(-0.93000)*/
-{13, 0,123,__LINE__, 0xbfea5b6a, 0x40000000, 0xbfed70a3, 0xd70a3d6e},			/* -0.82365=f(-0.92000)*/
-{13, 0,123,__LINE__, 0xbfea1efa, 0x40000000, 0xbfed1eb8, 0x51eb851c},			/* -0.81628=f(-0.91000)*/
-{13, 0,123,__LINE__, 0xbfe9e23c, 0xe0000000, 0xbfeccccc, 0xccccccca},			/* -0.80886=f(-0.90000)*/
-{13, 0,123,__LINE__, 0xbfe9a532, 0x20000000, 0xbfec7ae1, 0x47ae1478},			/* -0.80141=f(-0.89000)*/
-{13, 0,123,__LINE__, 0xbfe967d9, 0x80000000, 0xbfec28f5, 0xc28f5c26},			/* -0.79392=f(-0.88000)*/
-{14, 0,123,__LINE__, 0xbfe92a32, 0xe0000000, 0xbfebd70a, 0x3d70a3d4},			/* -0.78640=f(-0.87000)*/
-{14, 0,123,__LINE__, 0xbfe8ec3d, 0xc0000000, 0xbfeb851e, 0xb851eb82},			/* -0.77883=f(-0.86000)*/
-{14, 0,123,__LINE__, 0xbfe8adfa, 0x20000000, 0xbfeb3333, 0x33333330},			/* -0.77123=f(-0.85000)*/
-{14, 0,123,__LINE__, 0xbfe86f67, 0xa0000000, 0xbfeae147, 0xae147ade},			/* -0.76359=f(-0.84000)*/
-{14, 0,123,__LINE__, 0xbfe83086, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.75592=f(-0.83000)*/
-{12, 0,123,__LINE__, 0xbfe7f155, 0x40000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.74820=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbfe7b1d4, 0xc0000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.74045=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbfe77204, 0xa0000000, 0xbfe99999, 0x99999996},			/* -0.73266=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbfe731e4, 0xc0000000, 0xbfe947ae, 0x147ae144},			/* -0.72484=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbfe6f174, 0xa0000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.71697=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbfe6b0b4, 0x80000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.70907=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbfe66fa3, 0xe0000000, 0xbfe851eb, 0x851eb84e},			/* -0.70112=f(-0.76000)*/
-{15, 0,123,__LINE__, 0xbfe62e43, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* -0.69314=f(-0.75000)*/
-{14, 0,123,__LINE__, 0xbfe5ec91, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.68512=f(-0.74000)*/
-{14, 0,123,__LINE__, 0xbfe5aa8f, 0x60000000, 0xbfe75c28, 0xf5c28f58},			/* -0.67707=f(-0.73000)*/
-{14, 0,123,__LINE__, 0xbfe5683c, 0xa0000000, 0xbfe70a3d, 0x70a3d706},			/* -0.66897=f(-0.72000)*/
-{14, 0,123,__LINE__, 0xbfe52599, 0x20000000, 0xbfe6b851, 0xeb851eb4},			/* -0.66083=f(-0.71000)*/
-{14, 0,123,__LINE__, 0xbfe4e2a5, 0x00000000, 0xbfe66666, 0x66666662},			/* -0.65266=f(-0.70000)*/
-{14, 0,123,__LINE__, 0xbfe49f60, 0x20000000, 0xbfe6147a, 0xe147ae10},			/* -0.64445=f(-0.69000)*/
-{15, 0,123,__LINE__, 0xbfe45bca, 0x80000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.63620=f(-0.68000)*/
-{15, 0,123,__LINE__, 0xbfe417e4, 0x60000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.62791=f(-0.67000)*/
-{13, 0,123,__LINE__, 0xbfe3d3ad, 0xa0000000, 0xbfe51eb8, 0x51eb851a},			/* -0.61958=f(-0.66000)*/
-{13, 0,123,__LINE__, 0xbfe38f26, 0x40000000, 0xbfe4cccc, 0xccccccc8},			/* -0.61122=f(-0.65000)*/
-{13, 0,123,__LINE__, 0xbfe34a4e, 0xa0000000, 0xbfe47ae1, 0x47ae1476},			/* -0.60282=f(-0.64000)*/
-{13, 0,123,__LINE__, 0xbfe30526, 0xe0000000, 0xbfe428f5, 0xc28f5c24},			/* -0.59437=f(-0.63000)*/
-{15, 0,123,__LINE__, 0xbfe2bfaf, 0x20000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.58589=f(-0.62000)*/
-{15, 0,123,__LINE__, 0xbfe279e7, 0x80000000, 0xbfe3851e, 0xb851eb80},			/* -0.57738=f(-0.61000)*/
-{15, 0,123,__LINE__, 0xbfe233d0, 0x40000000, 0xbfe33333, 0x3333332e},			/* -0.56882=f(-0.60000)*/
-{14, 0,123,__LINE__, 0xbfe1ed69, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* -0.56023=f(-0.59000)*/
-{14, 0,123,__LINE__, 0xbfe1a6b4, 0x20000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.55159=f(-0.58000)*/
-{14, 0,123,__LINE__, 0xbfe15faf, 0xc0000000, 0xbfe23d70, 0xa3d70a38},			/* -0.54293=f(-0.57000)*/
-{16, 0,123,__LINE__, 0xbfe1185d, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.53422=f(-0.56000)*/
-{15, 0,123,__LINE__, 0xbfe0d0bc, 0x60000000, 0xbfe19999, 0x99999994},			/* -0.52548=f(-0.55000)*/
-{15, 0,123,__LINE__, 0xbfe088ce, 0x20000000, 0xbfe147ae, 0x147ae142},			/* -0.51669=f(-0.54000)*/
-{16, 0,123,__LINE__, 0xbfe04092, 0xa0000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.50788=f(-0.53000)*/
-{10, 0,123,__LINE__, 0xbfdff014, 0xe0000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.49902=f(-0.52000)*/
-{10, 0,123,__LINE__, 0xbfdf5e6c, 0x80000000, 0xbfe051eb, 0x851eb84c},			/* -0.49013=f(-0.51000)*/
-{10, 0,123,__LINE__, 0xbfdecc2c, 0xc0000000, 0xbfdfffff, 0xfffffff4},			/* -0.48121=f(-0.50000)*/
-{15, 0,123,__LINE__, 0xbfde3956, 0xc0000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.47224=f(-0.49000)*/
-{14, 0,123,__LINE__, 0xbfdda5ec, 0x20000000, 0xbfdeb851, 0xeb851eac},			/* -0.46325=f(-0.48000)*/
-{14, 0,123,__LINE__, 0xbfdd11ee, 0x00000000, 0xbfde147a, 0xe147ae08},			/* -0.45421=f(-0.47000)*/
-{15, 0,123,__LINE__, 0xbfdc7d5d, 0xe0000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.44515=f(-0.46000)*/
-{13, 0,123,__LINE__, 0xbfdbe83c, 0xe0000000, 0xbfdccccc, 0xccccccc0},			/* -0.43604=f(-0.45000)*/
-{13, 0,123,__LINE__, 0xbfdb528c, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.42691=f(-0.44000)*/
-{15, 0,123,__LINE__, 0xbfdabc4f, 0x40000000, 0xbfdb851e, 0xb851eb78},			/* -0.41774=f(-0.43000)*/
-{16, 0,123,__LINE__, 0xbfda2585, 0xc0000000, 0xbfdae147, 0xae147ad4},			/* -0.40854=f(-0.42000)*/
-{14, 0,123,__LINE__, 0xbfd98e32, 0x60000000, 0xbfda3d70, 0xa3d70a30},			/* -0.39930=f(-0.41000)*/
-{15, 0,123,__LINE__, 0xbfd8f656, 0xc0000000, 0xbfd99999, 0x9999998c},			/* -0.39003=f(-0.40000)*/
-{16, 0,123,__LINE__, 0xbfd85df4, 0xc0000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.38073=f(-0.39000)*/
-{12, 0,123,__LINE__, 0xbfd7c50e, 0xa0000000, 0xbfd851eb, 0x851eb844},			/* -0.37140=f(-0.38000)*/
-{16, 0,123,__LINE__, 0xbfd72ba6, 0x20000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.36203=f(-0.37000)*/
-{15, 0,123,__LINE__, 0xbfd691bd, 0xc0000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.35264=f(-0.36000)*/
-{14, 0,123,__LINE__, 0xbfd5f757, 0x80000000, 0xbfd66666, 0x66666658},			/* -0.34322=f(-0.35000)*/
-{16, 0,123,__LINE__, 0xbfd55c76, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.33376=f(-0.34000)*/
-{15, 0,123,__LINE__, 0xbfd4c11b, 0x60000000, 0xbfd51eb8, 0x51eb8510},			/* -0.32428=f(-0.33000)*/
-{17, 0,123,__LINE__, 0xbfd4254a, 0x20000000, 0xbfd47ae1, 0x47ae146c},			/* -0.31477=f(-0.32000)*/
-{17, 0,123,__LINE__, 0xbfd38905, 0x20000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30523=f(-0.31000)*/
-{15, 0,123,__LINE__, 0xbfd2ec4e, 0xc0000000, 0xbfd33333, 0x33333324},			/* -0.29567=f(-0.30000)*/
-{16, 0,123,__LINE__, 0xbfd24f29, 0xa0000000, 0xbfd28f5c, 0x28f5c280},			/* -0.28608=f(-0.29000)*/
-{17, 0,123,__LINE__, 0xbfd1b199, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.27646=f(-0.28000)*/
-{17, 0,123,__LINE__, 0xbfd1139f, 0x60000000, 0xbfd147ae, 0x147ae138},			/* -0.26682=f(-0.27000)*/
-{16, 0,123,__LINE__, 0xbfd0753f, 0xe0000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25715=f(-0.26000)*/
-{11, 0,123,__LINE__, 0xbfcfacfb, 0x20000000, 0xbfcfffff, 0xffffffe0},			/* -0.24746=f(-0.25000)*/
-{16, 0,123,__LINE__, 0xbfce6eb6, 0xe0000000, 0xbfceb851, 0xeb851e98},			/* -0.23775=f(-0.24000)*/
-{17, 0,123,__LINE__, 0xbfcd2fb9, 0xc0000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.22801=f(-0.23000)*/
-{13, 0,123,__LINE__, 0xbfcbf009, 0xe0000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.21826=f(-0.22000)*/
-{17, 0,123,__LINE__, 0xbfcaafae, 0x40000000, 0xbfcae147, 0xae147ac0},			/* -0.20848=f(-0.21000)*/
-{16, 0,123,__LINE__, 0xbfc96ead, 0x60000000, 0xbfc99999, 0x99999978},			/* -0.19869=f(-0.20000)*/
-{17, 0,123,__LINE__, 0xbfc82d0e, 0x80000000, 0xbfc851eb, 0x851eb830},			/* -0.18887=f(-0.19000)*/
-{15, 0,123,__LINE__, 0xbfc6ead8, 0x60000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17904=f(-0.18000)*/
-{17, 0,123,__LINE__, 0xbfc5a812, 0x40000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16919=f(-0.17000)*/
-{19, 0,123,__LINE__, 0xbfc464c3, 0xa0000000, 0xbfc47ae1, 0x47ae1458},			/* -0.15932=f(-0.16000)*/
-{19, 0,123,__LINE__, 0xbfc320f3, 0xc0000000, 0xbfc33333, 0x33333310},			/* -0.14944=f(-0.15000)*/
-{18, 0,123,__LINE__, 0xbfc1dcaa, 0x40000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.13954=f(-0.14000)*/
-{18, 0,123,__LINE__, 0xbfc097ee, 0x80000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12963=f(-0.13000)*/
-{19, 0,123,__LINE__, 0xbfbea591, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* -0.11971=f(-0.12000)*/
-{18, 0,123,__LINE__, 0xbfbc1a80, 0x20000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.10977=f(-0.11000)*/
-{19, 0,123,__LINE__, 0xbfb98eb9, 0xe0000000, 0xbfb99999, 0x99999953},			/* -0.09983=f(-0.00100)*/
-{20, 0,123,__LINE__, 0xbfb7024e, 0x80000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08987=f(-0.09000)*/
-{20, 0,123,__LINE__, 0xbfb4754d, 0xc0000000, 0xbfb47ae1, 0x47ae1435},			/* -0.07991=f(-0.08000)*/
-{20, 0,123,__LINE__, 0xbfb1e7c8, 0x20000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.06994=f(-0.07000)*/
-{20, 0,123,__LINE__, 0xbfaeb39b, 0xe0000000, 0xbfaeb851, 0xeb851e2d},			/* -0.05996=f(-0.06000)*/
-{20, 0,123,__LINE__, 0xbfa996df, 0x60000000, 0xbfa99999, 0x9999990e},			/* -0.04997=f(-0.05000)*/
-{22, 0,123,__LINE__, 0xbfa4797b, 0xa0000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.03998=f(-0.04000)*/
-{20, 0,123,__LINE__, 0xbf9eb724, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{25, 0,123,__LINE__, 0xbf947a87, 0xc0000000, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{26, 0,123,__LINE__, 0xbf847aca, 0xe0000000, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{26, 0,123,__LINE__, 0x3f847aca, 0xe0000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{25, 0,123,__LINE__, 0x3f947a87, 0xc0000000, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{20, 0,123,__LINE__, 0x3f9eb724, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{22, 0,123,__LINE__, 0x3fa4797b, 0xa0000000, 0x3fa47ae1, 0x47ae1508},			/* 0.03998=f(0.04000)*/
-{20, 0,123,__LINE__, 0x3fa996df, 0x60000000, 0x3fa99999, 0x99999a27},			/* 0.04997=f(0.05000)*/
-{20, 0,123,__LINE__, 0x3faeb39b, 0xe0000000, 0x3faeb851, 0xeb851f46},			/* 0.05996=f(0.06000)*/
-{20, 0,123,__LINE__, 0x3fb1e7c8, 0x20000000, 0x3fb1eb85, 0x1eb85232},			/* 0.06994=f(0.07000)*/
-{20, 0,123,__LINE__, 0x3fb4754d, 0xc0000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.07991=f(0.08000)*/
-{20, 0,123,__LINE__, 0x3fb7024e, 0x80000000, 0x3fb70a3d, 0x70a3d750},			/* 0.08987=f(0.09000)*/
-{19, 0,123,__LINE__, 0x3fb98eb9, 0xe0000000, 0x3fb99999, 0x999999df},			/* 0.09983=f(0.10000)*/
-{18, 0,123,__LINE__, 0x3fbc1a80, 0x20000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10977=f(0.11000)*/
-{19, 0,123,__LINE__, 0x3fbea591, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 0.11971=f(0.12000)*/
-{18, 0,123,__LINE__, 0x3fc097ee, 0x80000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12963=f(0.13000)*/
-{18, 0,123,__LINE__, 0x3fc1dcaa, 0x40000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.13954=f(0.14000)*/
-{19, 0,123,__LINE__, 0x3fc320f3, 0xc0000000, 0x3fc33333, 0x33333356},			/* 0.14944=f(0.15000)*/
-{19, 0,123,__LINE__, 0x3fc464c3, 0xa0000000, 0x3fc47ae1, 0x47ae149e},			/* 0.15932=f(0.16000)*/
-{17, 0,123,__LINE__, 0x3fc5a812, 0x40000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16919=f(0.17000)*/
-{15, 0,123,__LINE__, 0x3fc6ead8, 0x60000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.17904=f(0.18000)*/
-{17, 0,123,__LINE__, 0x3fc82d0e, 0x80000000, 0x3fc851eb, 0x851eb876},			/* 0.18887=f(0.19000)*/
-{16, 0,123,__LINE__, 0x3fc96ead, 0x60000000, 0x3fc99999, 0x999999be},			/* 0.19869=f(0.20000)*/
-{17, 0,123,__LINE__, 0x3fcaafae, 0x40000000, 0x3fcae147, 0xae147b06},			/* 0.20848=f(0.21000)*/
-{13, 0,123,__LINE__, 0x3fcbf009, 0xe0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21826=f(0.22000)*/
-{17, 0,123,__LINE__, 0x3fcd2fb9, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.22801=f(0.23000)*/
-{16, 0,123,__LINE__, 0x3fce6eb6, 0xe0000000, 0x3fceb851, 0xeb851ede},			/* 0.23775=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fcfacfb, 0x20000000, 0x3fd00000, 0x00000013},			/* 0.24746=f(0.25000)*/
-{16, 0,123,__LINE__, 0x3fd0753f, 0xe0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25715=f(0.26000)*/
-{17, 0,123,__LINE__, 0x3fd1139f, 0x60000000, 0x3fd147ae, 0x147ae15b},			/* 0.26682=f(0.27000)*/
-{17, 0,123,__LINE__, 0x3fd1b199, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.27646=f(0.28000)*/
-{16, 0,123,__LINE__, 0x3fd24f29, 0xa0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28608=f(0.29000)*/
-{15, 0,123,__LINE__, 0x3fd2ec4e, 0xc0000000, 0x3fd33333, 0x33333347},			/* 0.29567=f(0.30000)*/
-{17, 0,123,__LINE__, 0x3fd38905, 0x20000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30523=f(0.31000)*/
-{17, 0,123,__LINE__, 0x3fd4254a, 0x20000000, 0x3fd47ae1, 0x47ae148f},			/* 0.31477=f(0.32000)*/
-{15, 0,123,__LINE__, 0x3fd4c11b, 0x60000000, 0x3fd51eb8, 0x51eb8533},			/* 0.32428=f(0.33000)*/
-{16, 0,123,__LINE__, 0x3fd55c76, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.33376=f(0.34000)*/
-{14, 0,123,__LINE__, 0x3fd5f757, 0x80000000, 0x3fd66666, 0x6666667b},			/* 0.34322=f(0.35000)*/
-{15, 0,123,__LINE__, 0x3fd691bd, 0xc0000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.35264=f(0.36000)*/
-{16, 0,123,__LINE__, 0x3fd72ba6, 0x20000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.36203=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fd7c50e, 0xa0000000, 0x3fd851eb, 0x851eb867},			/* 0.37140=f(0.38000)*/
-{16, 0,123,__LINE__, 0x3fd85df4, 0xc0000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.38073=f(0.39000)*/
-{15, 0,123,__LINE__, 0x3fd8f656, 0xc0000000, 0x3fd99999, 0x999999af},			/* 0.39003=f(0.40000)*/
-{14, 0,123,__LINE__, 0x3fd98e32, 0x60000000, 0x3fda3d70, 0xa3d70a53},			/* 0.39930=f(0.41000)*/
-{16, 0,123,__LINE__, 0x3fda2585, 0xc0000000, 0x3fdae147, 0xae147af7},			/* 0.40854=f(0.42000)*/
-{15, 0,123,__LINE__, 0x3fdabc4f, 0x40000000, 0x3fdb851e, 0xb851eb9b},			/* 0.41774=f(0.43000)*/
-{13, 0,123,__LINE__, 0x3fdb528c, 0xc0000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.42691=f(0.44000)*/
-{13, 0,123,__LINE__, 0x3fdbe83c, 0xe0000000, 0x3fdccccc, 0xcccccce3},			/* 0.43604=f(0.45000)*/
-{15, 0,123,__LINE__, 0x3fdc7d5d, 0xe0000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.44515=f(0.46000)*/
-{14, 0,123,__LINE__, 0x3fdd11ee, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 0.45421=f(0.47000)*/
-{14, 0,123,__LINE__, 0x3fdda5ec, 0x20000000, 0x3fdeb851, 0xeb851ecf},			/* 0.46325=f(0.48000)*/
-{15, 0,123,__LINE__, 0x3fde3956, 0xc0000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.47224=f(0.49000)*/
-{10, 0,123,__LINE__, 0x3fdecc2c, 0xc0000000, 0x3fe00000, 0x0000000b},			/* 0.48121=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fdf5e6c, 0x80000000, 0x3fe051eb, 0x851eb85d},			/* 0.49013=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fdff014, 0xe0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.49902=f(0.52000)*/
-{16, 0,123,__LINE__, 0x3fe04092, 0xa0000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.50788=f(0.53000)*/
-{15, 0,123,__LINE__, 0x3fe088ce, 0x20000000, 0x3fe147ae, 0x147ae153},			/* 0.51669=f(0.54000)*/
-{15, 0,123,__LINE__, 0x3fe0d0bc, 0x60000000, 0x3fe19999, 0x999999a5},			/* 0.52548=f(0.55000)*/
-{16, 0,123,__LINE__, 0x3fe1185d, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.53422=f(0.56000)*/
-{14, 0,123,__LINE__, 0x3fe15faf, 0xc0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.54293=f(0.57000)*/
-{14, 0,123,__LINE__, 0x3fe1a6b4, 0x20000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.55159=f(0.58000)*/
-{14, 0,123,__LINE__, 0x3fe1ed69, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 0.56023=f(0.59000)*/
-{15, 0,123,__LINE__, 0x3fe233d0, 0x40000000, 0x3fe33333, 0x3333333f},			/* 0.56882=f(0.60000)*/
-{15, 0,123,__LINE__, 0x3fe279e7, 0x80000000, 0x3fe3851e, 0xb851eb91},			/* 0.57738=f(0.61000)*/
-{15, 0,123,__LINE__, 0x3fe2bfaf, 0x20000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.58589=f(0.62000)*/
-{13, 0,123,__LINE__, 0x3fe30526, 0xe0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.59437=f(0.63000)*/
-{13, 0,123,__LINE__, 0x3fe34a4e, 0xa0000000, 0x3fe47ae1, 0x47ae1487},			/* 0.60282=f(0.64000)*/
-{13, 0,123,__LINE__, 0x3fe38f26, 0x40000000, 0x3fe4cccc, 0xccccccd9},			/* 0.61122=f(0.65000)*/
-{13, 0,123,__LINE__, 0x3fe3d3ad, 0xa0000000, 0x3fe51eb8, 0x51eb852b},			/* 0.61958=f(0.66000)*/
-{15, 0,123,__LINE__, 0x3fe417e4, 0x60000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.62791=f(0.67000)*/
-{15, 0,123,__LINE__, 0x3fe45bca, 0x80000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.63620=f(0.68000)*/
-{14, 0,123,__LINE__, 0x3fe49f60, 0x20000000, 0x3fe6147a, 0xe147ae21},			/* 0.64445=f(0.69000)*/
-{14, 0,123,__LINE__, 0x3fe4e2a5, 0x00000000, 0x3fe66666, 0x66666673},			/* 0.65266=f(0.70000)*/
-{14, 0,123,__LINE__, 0x3fe52599, 0x20000000, 0x3fe6b851, 0xeb851ec5},			/* 0.66083=f(0.71000)*/
-{14, 0,123,__LINE__, 0x3fe5683c, 0xa0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.66897=f(0.72000)*/
-{14, 0,123,__LINE__, 0x3fe5aa8f, 0x60000000, 0x3fe75c28, 0xf5c28f69},			/* 0.67707=f(0.73000)*/
-{14, 0,123,__LINE__, 0x3fe5ec91, 0x80000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.68512=f(0.74000)*/
-{15, 0,123,__LINE__, 0x3fe62e43, 0x00000000, 0x3fe80000, 0x0000000d},			/* 0.69314=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe66fa3, 0xe0000000, 0x3fe851eb, 0x851eb85f},			/* 0.70112=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe6b0b4, 0x80000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.70907=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe6f174, 0xa0000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.71697=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe731e4, 0xc0000000, 0x3fe947ae, 0x147ae155},			/* 0.72484=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe77204, 0xa0000000, 0x3fe99999, 0x999999a7},			/* 0.73266=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe7b1d4, 0xc0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.74045=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3fe7f155, 0x40000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.74820=f(0.82000)*/
-{14, 0,123,__LINE__, 0x3fe83086, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.75592=f(0.83000)*/
-{14, 0,123,__LINE__, 0x3fe86f67, 0xa0000000, 0x3feae147, 0xae147aef},			/* 0.76359=f(0.84000)*/
-{14, 0,123,__LINE__, 0x3fe8adfa, 0x20000000, 0x3feb3333, 0x33333341},			/* 0.77123=f(0.85000)*/
-{14, 0,123,__LINE__, 0x3fe8ec3d, 0xc0000000, 0x3feb851e, 0xb851eb93},			/* 0.77883=f(0.86000)*/
-{14, 0,123,__LINE__, 0x3fe92a32, 0xe0000000, 0x3febd70a, 0x3d70a3e5},			/* 0.78640=f(0.87000)*/
-{13, 0,123,__LINE__, 0x3fe967d9, 0x80000000, 0x3fec28f5, 0xc28f5c37},			/* 0.79392=f(0.88000)*/
-{13, 0,123,__LINE__, 0x3fe9a532, 0x20000000, 0x3fec7ae1, 0x47ae1489},			/* 0.80141=f(0.89000)*/
-{13, 0,123,__LINE__, 0x3fe9e23c, 0xe0000000, 0x3feccccc, 0xccccccdb},			/* 0.80886=f(0.90000)*/
-{13, 0,123,__LINE__, 0x3fea1efa, 0x40000000, 0x3fed1eb8, 0x51eb852d},			/* 0.81628=f(0.91000)*/
-{13, 0,123,__LINE__, 0x3fea5b6a, 0x40000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.82365=f(0.92000)*/
-{13, 0,123,__LINE__, 0x3fea978d, 0x80000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.83100=f(0.93000)*/
-{13, 0,123,__LINE__, 0x3fead364, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 0.83830=f(0.94000)*/
-{13, 0,123,__LINE__, 0x3feb0eee, 0x60000000, 0x3fee6666, 0x66666675},			/* 0.84557=f(0.95000)*/
-{13, 0,123,__LINE__, 0x3feb4a2c, 0xe0000000, 0x3feeb851, 0xeb851ec7},			/* 0.85280=f(0.96000)*/
-{13, 0,123,__LINE__, 0x3feb851f, 0xc0000000, 0x3fef0a3d, 0x70a3d719},			/* 0.86000=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3febbfc7, 0x80000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.86716=f(0.98000)*/
-{13, 0,123,__LINE__, 0x3febfa24, 0x20000000, 0x3fefae14, 0x7ae147bd},			/* 0.87428=f(0.99000)*/
-{14, 0,123,__LINE__, 0x3fec3436, 0x60000000, 0x3ff00000, 0x00000007},			/* 0.88137=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fec6dfe, 0x60000000, 0x3ff028f5, 0xc28f5c30},			/* 0.88842=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3feca77c, 0xc0000000, 0x3ff051eb, 0x851eb859},			/* 0.89544=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fece0b1, 0xa0000000, 0x3ff07ae1, 0x47ae1482},			/* 0.90242=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fed199d, 0xa0000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.90937=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3fed5240, 0xe0000000, 0x3ff0cccc, 0xccccccd4},			/* 0.91629=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3fed8a9b, 0xe0000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.92317=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fedc2af, 0x40000000, 0x3ff11eb8, 0x51eb8526},			/* 0.93001=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fedfa7b, 0x20000000, 0x3ff147ae, 0x147ae14f},			/* 0.93682=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fee31ff, 0xe0000000, 0x3ff170a3, 0xd70a3d78},			/* 0.94360=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fee693d, 0xe0000000, 0x3ff19999, 0x999999a1},			/* 0.95034=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3feea035, 0xe0000000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.95705=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3feed6e8, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 0.96373=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fef0d54, 0xc0000000, 0x3ff2147a, 0xe147ae1c},			/* 0.97037=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fef437c, 0x80000000, 0x3ff23d70, 0xa3d70a45},			/* 0.97698=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fef795f, 0xa0000000, 0x3ff26666, 0x6666666e},			/* 0.98356=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fefaefe, 0xc0000000, 0x3ff28f5c, 0x28f5c297},			/* 0.99011=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fefe45a, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 0.99662=f(1.17000)*/
-{14, 0,123,__LINE__, 0x3ff00cb9, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 1.00310=f(1.18000)*/
-{14, 0,123,__LINE__, 0x3ff02723, 0xa0000000, 0x3ff30a3d, 0x70a3d712},			/* 1.00955=f(1.19000)*/
-{16, 0,123,__LINE__, 0xc0044c62, 0xa0000000, 0xc01921fb, 0x54442d18},			/* -2.53729=f(-6.28318)*/
-{15, 0,123,__LINE__, 0xc002090a, 0x80000000, 0xc012d97c, 0x7f3321d2},			/* -2.25441=f(-4.71238)*/
-{ 1, 0,123,__LINE__, 0xbffdcbf6, 0xa0000000, 0xc00921fb, 0x54442d18},			/* -1.86229=f(-3.14159)*/
-{12, 0,123,__LINE__, 0xbff3bc04, 0xe0000000, 0xbff921fb, 0x54442d18},			/* -1.23340=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{12, 0,123,__LINE__, 0x3ff3bc04, 0xe0000000, 0x3ff921fb, 0x54442d18},			/* 1.23340=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3ffdcbf6, 0xa0000000, 0x400921fb, 0x54442d18},			/* 1.86229=f(3.14159)*/
-{15, 0,123,__LINE__, 0x4002090a, 0x80000000, 0x4012d97c, 0x7f3321d2},			/* 2.25441=f(4.71238)*/
-{11, 0,123,__LINE__, 0xc01060e4, 0xa0000000, 0xc03e0000, 0x00000000},			/* -4.09462=f(-30.0000)*/
-{11, 0,123,__LINE__, 0xc0102531, 0x60000000, 0xc03c4ccc, 0xcccccccd},			/* -4.03632=f(-28.3000)*/
-{12, 0,123,__LINE__, 0xc00fcb98, 0x40000000, 0xc03a9999, 0x9999999a},			/* -3.97441=f(-26.6000)*/
-{12, 0,123,__LINE__, 0xc00f4470, 0xa0000000, 0xc038e666, 0x66666667},			/* -3.90841=f(-24.9000)*/
-{12, 0,123,__LINE__, 0xc00eb3bd, 0x60000000, 0xc0373333, 0x33333334},			/* -3.83776=f(-23.2000)*/
-{12, 0,123,__LINE__, 0xc00e180b, 0x60000000, 0xc0358000, 0x00000001},			/* -3.76174=f(-21.5000)*/
-{12, 0,123,__LINE__, 0xc00d6f8b, 0xe0000000, 0xc033cccc, 0xccccccce},			/* -3.67946=f(-19.8000)*/
-{12, 0,123,__LINE__, 0xc00cb7f4, 0x40000000, 0xc0321999, 0x9999999b},			/* -3.58982=f(-18.1000)*/
-{12, 0,123,__LINE__, 0xc00bee4c, 0x80000000, 0xc0306666, 0x66666668},			/* -3.49135=f(-16.4000)*/
-{12, 0,123,__LINE__, 0xc00b0ea4, 0x60000000, 0xc02d6666, 0x6666666a},			/* -3.38214=f(-14.7000)*/
-{12, 0,123,__LINE__, 0xc00a139a, 0xc0000000, 0xc02a0000, 0x00000004},			/* -3.25957=f(-13.0000)*/
-{12, 0,123,__LINE__, 0xc008f58f, 0x40000000, 0xc0269999, 0x9999999e},			/* -3.11990=f(-11.3000)*/
-{14, 0,123,__LINE__, 0xc007a930, 0x80000000, 0xc0233333, 0x33333338},			/* -2.95761=f(-9.60000)*/
-{14, 0,123,__LINE__, 0xc0061ca7, 0xc0000000, 0xc01f9999, 0x999999a3},			/* -2.76399=f(-7.90000)*/
-{16, 0,123,__LINE__, 0xc004316f, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -2.52413=f(-6.20000)*/
-{14, 0,123,__LINE__, 0xc001acbe, 0x80000000, 0xc0120000, 0x00000009},			/* -2.20934=f(-4.50000)*/
-{ 1, 0,123,__LINE__, 0xbffc0d39, 0xa0000000, 0xc0066666, 0x66666678},			/* -1.75322=f(-2.80000)*/
-{11, 0,123,__LINE__, 0xbfee693d, 0xe0000000, 0xbff19999, 0x999999bd},			/* -0.95034=f(-1.10000)*/
-{15, 0,123,__LINE__, 0x3fe233d0, 0x40000000, 0x3fe33333, 0x333332ec},			/* 0.56882=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0x3ff91fdc, 0x60000000, 0x40026666, 0x66666654},			/* 1.57027=f(2.30000)*/
-{14, 0,123,__LINE__, 0x4000c1f8, 0xa0000000, 0x400fffff, 0xffffffee},			/* 2.09471=f(4.00000)*/
-{13, 0,123,__LINE__, 0x4003879e, 0xc0000000, 0x4016cccc, 0xccccccc4},			/* 2.44122=f(5.70000)*/
-{15, 0,123,__LINE__, 0x400597e2, 0x00000000, 0x401d9999, 0x99999991},			/* 2.69916=f(7.40000)*/
-{14, 0,123,__LINE__, 0x40073c44, 0x40000000, 0x40223333, 0x3333332f},			/* 2.90442=f(9.10000)*/
-{12, 0,123,__LINE__, 0x40089940, 0x60000000, 0x40259999, 0x99999995},			/* 3.07483=f(10.8000)*/
-{12, 0,123,__LINE__, 0x4009c386, 0xe0000000, 0x4028ffff, 0xfffffffb},			/* 3.22047=f(12.5000)*/
-{12, 0,123,__LINE__, 0x400ac7f0, 0x80000000, 0x402c6666, 0x66666661},			/* 3.34762=f(14.2000)*/
-{12, 0,123,__LINE__, 0x400baf02, 0x60000000, 0x402fcccc, 0xccccccc7},			/* 3.46045=f(15.9000)*/
-{12, 0,123,__LINE__, 0x400c7eac, 0x60000000, 0x40319999, 0x99999997},			/* 3.56185=f(17.6000)*/
-{12, 0,123,__LINE__, 0x400d3b3b, 0xe0000000, 0x40334ccc, 0xccccccca},			/* 3.65392=f(19.3000)*/
-{12, 0,123,__LINE__, 0x400de7e8, 0x40000000, 0x4034ffff, 0xfffffffd},			/* 3.73823=f(21.0000)*/
-{12, 0,123,__LINE__, 0x400e8729, 0x60000000, 0x4036b333, 0x33333330},			/* 3.81599=f(22.7000)*/
-{12, 0,123,__LINE__, 0x400f1aee, 0x60000000, 0x40386666, 0x66666663},			/* 3.88815=f(24.4000)*/
-{12, 0,123,__LINE__, 0x400fa4c2, 0xa0000000, 0x403a1999, 0x99999996},			/* 3.95544=f(26.1000)*/
-{11, 0,123,__LINE__, 0x401012f3, 0x60000000, 0x403bcccc, 0xccccccc9},			/* 4.01850=f(27.8000)*/
-{11, 0,123,__LINE__, 0x40104fb1, 0x40000000, 0x403d7fff, 0xfffffffc},			/* 4.07782=f(29.5000)*/
-0,};
-test_asinhf(m)   {run_vector_1(m,asinhf_vec,(char *)(asinhf),"asinhf","ff");   }	
diff --git a/newlib/libm/test/atan2_vec.c b/newlib/libm/test/atan2_vec.c
deleted file mode 100644
index 802108453..000000000
--- a/newlib/libm/test/atan2_vec.c
+++ /dev/null
@@ -1,1604 +0,0 @@
-#include "test.h"
- one_line_type atan2_vec[] = {
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbff00000, 0x00000000, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc002a4fc, 0x28e95ed8, 0xbff00000, 0x00000000, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0026dcb, 0xd423977c, 0xbff00000, 0x00000000, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc00233cb, 0x72d34279, 0xbff00000, 0x00000000, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbff00000, 0x00000000, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbff00000, 0x00000000, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc00173c1, 0xf5810bb7, 0xbff00000, 0x00000000, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0012d68, 0x46b76641, 0xbff00000, 0x00000000, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbff00000, 0x00000000, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc00096d0, 0x5371b1c4, 0xbff00000, 0x00000000, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbff00000, 0x00000000, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xbfffe5fd, 0xcebfcb86, 0xbff00000, 0x00000000, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbff00000, 0x00000000, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xbffe8500, 0x76ee9e8d, 0xbff00000, 0x00000000, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbffdcbc9, 0xedcbd8d9, 0xbff00000, 0x00000000, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbff00000, 0x00000000, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffc4a83, 0x936311d9, 0xbff00000, 0x00000000, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffb83d5, 0xc13f26b8, 0xbff00000, 0x00000000, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffaba39, 0x7c7259dc, 0xbff00000, 0x00000000, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbff9ee9c, 0x8100c211, 0xbff00000, 0x00000000, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbff00000, 0x00000000, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff8555a, 0x2787981e, 0xbff00000, 0x00000000, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff789bd, 0x2c160052, 0xbff00000, 0x00000000, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff6c020, 0xe7493376, 0xbff00000, 0x00000000, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff5f973, 0x15254855, 0xbff00000, 0x00000000, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff5368c, 0x951e9cfb, 0xbff00000, 0x00000000, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff4782c, 0xbabc8156, 0xbff00000, 0x00000000, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff3bef6, 0x3199bba1, 0xbff00000, 0x00000000, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff30b6d, 0x796a4da7, 0xbff00000, 0x00000000, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff25df8, 0xd9c88ea8, 0xbff00000, 0x00000000, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbff00000, 0x00000000, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbff11656, 0x01a4f6a5, 0xbff00000, 0x00000000, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbff07c6c, 0x6947a6a6, 0xbff00000, 0x00000000, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfefd24c, 0x36331b59, 0xbff00000, 0x00000000, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfeeb8e5, 0x7b0c8580, 0xbff00000, 0x00000000, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfedac67, 0x0561bb4c, 0xbff00000, 0x00000000, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfecac7c, 0x57846f9b, 0xbff00000, 0x00000000, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfebb8bf, 0x85c3aa79, 0xbff00000, 0x00000000, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfead0be, 0x0082566f, 0xbff00000, 0x00000000, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe9f3fc, 0xad6b38ff, 0xbff00000, 0x00000000, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0030dfc, 0xd57ce4cd, 0xbfee6666, 0x66666666, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfee6666, 0x66666666, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc002a225, 0xffe678cc, 0xbfee6666, 0x66666666, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc00267d3, 0x4beb12ff, 0xbfee6666, 0x66666666, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0022a5f, 0x18f3451e, 0xbfee6666, 0x66666666, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc001e9a5, 0xc99335b0, 0xbfee6666, 0x66666666, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc001a586, 0x8fc6c8d0, 0xbfee6666, 0x66666666, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0015de4, 0xca763c22, 0xbfee6666, 0x66666666, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc00112a9, 0x9ee56458, 0xbfee6666, 0x66666666, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc000c3c5, 0xca449e52, 0xbfee6666, 0x66666666, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0007133, 0xa108dee4, 0xbfee6666, 0x66666666, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0001af9, 0x294450fa, 0xbfee6666, 0x66666666, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xbfff8254, 0x66b1ec6c, 0xbfee6666, 0x66666666, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xbffec7d4, 0x93fc7aa8, 0xbfee6666, 0x66666666, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbffe06dc, 0x9297b73f, 0xbfee6666, 0x66666666, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffd3ffa, 0xcd08c0c2, 0xbfee6666, 0x66666666, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffc73e2, 0xe46d7f72, 0xbfee6666, 0x66666666, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffba36c, 0x4c864174, 0xbfee6666, 0x66666666, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffacf8e, 0xc523642f, 0xbfee6666, 0x66666666, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbff9f95c, 0xaa6341c4, 0xbfee6666, 0x66666666, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfee6666, 0x66666666, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff84a99, 0xfe25186a, 0xbfee6666, 0x66666666, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff77467, 0xe364f5ff, 0xbfee6666, 0x66666666, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff6a08a, 0x5c0218ba, 0xbfee6666, 0x66666666, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff5d013, 0xc41adabc, 0xbfee6666, 0x66666666, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff503fb, 0xdb7f996c, 0xbfee6666, 0x66666666, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff43d1a, 0x15f0a2ef, 0xbfee6666, 0x66666666, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff37c22, 0x148bdf86, 0xbfee6666, 0x66666666, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff2c1a2, 0x41d66dc2, 0xbfee6666, 0x66666666, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff20e04, 0x55ffb83a, 0xbfee6666, 0x66666666, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbff1618f, 0x66769c68, 0xbfee6666, 0x66666666, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbff0bc6b, 0x13ff1d8c, 0xbfee6666, 0x66666666, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbff01ea3, 0x6abd917e, 0xbfee6666, 0x66666666, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfef105a, 0x2737c3d5, 0xbfee6666, 0x66666666, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfedf1d3, 0x11f5911e, 0xbfee6666, 0x66666666, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfece156, 0x2ac3dd9e, 0xbfee6666, 0x66666666, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfebde70, 0xed439fe3, 0xbfee6666, 0x66666666, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfeae8a0, 0x21646861, 0xbfee6666, 0x66666666, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe9ff55, 0x5176d12f, 0xbfee6666, 0x66666666, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d15, 0xbfee6666, 0x66666666, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc003452d, 0x2a42ac29, 0xbfeccccc, 0xcccccccc, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc00310d2, 0xfe7fcad9, 0xbfeccccc, 0xcccccccc, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfeccccc, 0xcccccccc, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0029efc, 0xe9f0f591, 0xbfeccccc, 0xcccccccc, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0026127, 0x862b05f6, 0xbfeccccc, 0xcccccccc, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfeccccc, 0xcccccccc, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc001dace, 0xaa5dc056, 0xbfeccccc, 0xcccccccc, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc00191fb, 0xf721ce52, 0xbfeccccc, 0xcccccccc, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfeccccc, 0xcccccccc, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc000f46b, 0x88a03601, 0xbfeccccc, 0xcccccccc, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0009f87, 0x5343d018, 0xbfeccccc, 0xcccccccc, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfeccccc, 0xcccccccc, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xbfffd307, 0x52e3200b, 0xbfeccccc, 0xcccccccc, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xbfff1127, 0x088152ad, 0xbfeccccc, 0xcccccccc, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfeccccc, 0xcccccccc, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffd77c7, 0xb196b320, 0xbfeccccc, 0xcccccccc, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffca1a6, 0x56770bcf, 0xbfeccccc, 0xcccccccc, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffbc66e, 0x44cbc073, 0xbfeccccc, 0xcccccccc, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffae73b, 0xd5e44e5a, 0xbfeccccc, 0xcccccccc, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa054d, 0xbad44abd, 0xbfeccccc, 0xcccccccc, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfeccccc, 0xcccccccc, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff83ea8, 0xedb40f71, 0xbfeccccc, 0xcccccccc, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff75cba, 0xd2a40bd4, 0xbfeccccc, 0xcccccccc, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff67d88, 0x63bc99bb, 0xbfeccccc, 0xcccccccc, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff5a250, 0x52114e5e, 0xbfeccccc, 0xcccccccc, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff4cc2e, 0xf6f1a70e, 0xbfeccccc, 0xcccccccc, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a855e, 0xbfeccccc, 0xcccccccc, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff332cf, 0xa0070782, 0xbfeccccc, 0xcccccccc, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff270ef, 0x55a53a23, 0xbfeccccc, 0xcccccccc, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbfeccccc, 0xcccccccc, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbff104e8, 0x0200b9fe, 0xbfeccccc, 0xcccccccc, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbff05b1f, 0x9747ee2c, 0xbfeccccc, 0xcccccccc, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f698, 0xbfeccccc, 0xcccccccc, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfee3ffd, 0x74897b16, 0xbfeccccc, 0xcccccccc, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfed1cb2, 0xa799b303, 0xbfeccccc, 0xcccccccc, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfec08aa, 0xe496efa3, 0xbfeccccc, 0xcccccccc, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfeb034f, 0x38649c84, 0xbfeccccc, 0xcccccccc, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfea0bf9, 0xa94cde18, 0xbfeccccc, 0xcccccccc, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfeccccc, 0xcccccccc, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe844a1, 0x571188fa, 0xbfeccccc, 0xcccccccc, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0037f2d, 0x8b93012c, 0xbfeb3333, 0x33333332, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0034b25, 0xb27b30a5, 0xbfeb3333, 0x33333332, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc00313fc, 0x14754e13, 0xbfeb3333, 0x33333332, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfeb3333, 0x33333332, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0029b71, 0xd79223d7, 0xbfeb3333, 0x33333332, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc00259a7, 0x10566dda, 0xbfeb3333, 0x33333332, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc00213e8, 0x74487c34, 0xbfeb3333, 0x33333332, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc001ca05, 0x51b12411, 0xbfeb3333, 0x33333332, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0017bd2, 0x1306a2e0, 0xbfeb3333, 0x33333332, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc001292a, 0xcb9e5e97, 0xbfeb3333, 0x33333332, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc000d1f6, 0x365d11c8, 0xbfeb3333, 0x33333332, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0007629, 0x16cab416, 0xbfeb3333, 0x33333332, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc00015c9, 0xda46bdfc, 0xbfeb3333, 0x33333332, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xbfff61e8, 0x80287a21, 0xbfeb3333, 0x33333332, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbffe8fb9, 0x6bf1d8f4, 0xbfeb3333, 0x33333332, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffdb5a6, 0x01769193, 0xbfeb3333, 0x33333332, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffcd487, 0x74e47389, 0xbfeb3333, 0x33333332, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffbed70, 0x67a8594d, 0xbfeb3333, 0x33333332, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffb01a8, 0xbf84055c, 0xbfeb3333, 0x33333332, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa12a5, 0x465464cf, 0xbfeb3333, 0x33333332, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfeb3333, 0x33333332, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff83151, 0x6233f55f, 0xbfeb3333, 0x33333332, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff7424d, 0xe90454d2, 0xbfeb3333, 0x33333332, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff65686, 0x40e000e1, 0xbfeb3333, 0x33333332, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff56f6f, 0x33a3e6a5, 0xbfeb3333, 0x33333332, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff48e50, 0xa711c89b, 0xbfeb3333, 0x33333332, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff3b43d, 0x3c96813a, 0xbfeb3333, 0x33333332, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff2e20e, 0x285fe00d, 0xbfeb3333, 0x33333332, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff21862, 0xf3fade35, 0xbfeb3333, 0x33333332, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff157a4, 0x7af2f203, 0xbfeb3333, 0x33333332, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbff0a00a, 0x3bce369d, 0xbfeb3333, 0x33333332, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfefe342, 0x229739ff, 0xbfeb3333, 0x33333332, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfee98a5, 0x04f628d9, 0xbfeb3333, 0x33333332, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfed5fd8, 0x0a4c2417, 0xbfeb3333, 0x33333332, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfec384b, 0x7feec38c, 0xbfeb3333, 0x33333332, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfeb2151, 0x0fb6fcf3, 0xbfeb3333, 0x33333332, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfea1a25, 0xf2c82502, 0xbfeb3333, 0x33333332, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfeb3333, 0x33333332, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe837fc, 0xff3b7c10, 0xbfeb3333, 0x33333332, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe75b56, 0x8723f1c8, 0xbfeb3333, 0x33333332, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfe99999, 0x99999998, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0038899, 0xe572fe86, 0xbfe99999, 0x99999998, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc00351d1, 0x783b3dae, 0xbfe99999, 0x99999998, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0031787, 0x26d41fce, 0xbfe99999, 0x99999998, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe99999, 0x99999998, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0029771, 0xd7e7791f, 0xbfe99999, 0x99999998, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0025127, 0x9b802819, 0xbfe99999, 0x99999998, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0020660, 0x0be7bd52, 0xbfe99999, 0x99999998, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfe99999, 0x99999998, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0016279, 0xb155a47a, 0xbfe99999, 0x99999998, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0010900, 0x9519d638, 0xbfe99999, 0x99999998, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc000aa5d, 0x4f58e2c0, 0xbfe99999, 0x99999998, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe99999, 0x99999998, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xbfffbb37, 0x05373617, 0xbfe99999, 0x99999998, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbffedf81, 0xa4bd64d3, 0xbfe99999, 0x99999998, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffdfa99, 0x2206280a, 0xbfe99999, 0x99999998, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbfe99999, 0x99999998, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffc192a, 0xbdbdf878, 0xbfe99999, 0x99999998, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffb1f56, 0xfdeef00e, 0xbfe99999, 0x99999998, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa21a6, 0x31fd9506, 0xbfe99999, 0x99999998, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe99999, 0x99999998, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff82250, 0x768ac527, 0xbfe99999, 0x99999998, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff7249f, 0xaa996a20, 0xbfe99999, 0x99999998, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff62acb, 0xeaca61b6, 0xbfe99999, 0x99999998, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff5368c, 0x951e9cfb, 0xbfe99999, 0x99999998, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff4495d, 0x86823223, 0xbfe99999, 0x99999998, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff36475, 0x03caf55a, 0xbfe99999, 0x99999998, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff288bf, 0xa3512417, 0xbfe99999, 0x99999998, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbfe99999, 0x99999998, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff0ef3c, 0x09d694af, 0xbfe99999, 0x99999998, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbff031f5, 0x7e54adbc, 0xbfe99999, 0x99999998, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfeefe06, 0x8bba2272, 0xbfe99999, 0x99999998, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfedac67, 0x0561bb4c, 0xbfe99999, 0x99999998, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfec6e6d, 0x2171bf14, 0xbfe99999, 0x99999998, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfeb434e, 0xe31013f8, 0xbfe99999, 0x99999998, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfea2a25, 0xf172cfdf, 0xbfe99999, 0x99999998, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfe99999, 0x99999998, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe829d0, 0xb5c03526, 0xbfe99999, 0x99999998, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe740a7, 0x7023bda5, 0xbfe99999, 0x99999998, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe66585, 0xbb44ba45, 0xbfe99999, 0x99999998, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfe7ffff, 0xfffffffe, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc003c953, 0x34d30df5, 0xbfe7ffff, 0xfffffffe, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfe7ffff, 0xfffffffe, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0035951, 0xee0fd5ca, 0xbfe7ffff, 0xfffffffe, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0031b87, 0x267eca85, 0xbfe7ffff, 0xfffffffe, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe7ffff, 0xfffffffe, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc00292e4, 0xc2c70244, 0xbfe7ffff, 0xfffffffe, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0024772, 0xd9496c96, 0xbfe7ffff, 0xfffffffe, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfe7ffff, 0xfffffffe, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc001a0dc, 0x49296b7e, 0xbfe7ffff, 0xfffffffe, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfe7ffff, 0xfffffffe, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfe7ffff, 0xfffffffe, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0007c6c, 0x6947a6a8, 0xbfe7ffff, 0xfffffffe, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc0000f34, 0x0b81a4ef, 0xbfe7ffff, 0xfffffffe, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbfe7ffff, 0xfffffffe, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfe7ffff, 0xfffffffe, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffd4d68, 0xbe213418, 0xbfe7ffff, 0xfffffffe, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffc4a83, 0x936311d9, 0xbfe7ffff, 0xfffffffe, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffb40e9, 0xaf482898, 0xbfe7ffff, 0xfffffffe, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa32a5, 0x1baa2089, 0xbfe7ffff, 0xfffffffe, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe7ffff, 0xfffffffe, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff81151, 0x8cde39a4, 0xbfe7ffff, 0xfffffffe, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff7030c, 0xf9403195, 0xbfe7ffff, 0xfffffffe, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff5f973, 0x15254855, 0xbfe7ffff, 0xfffffffe, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff4f68d, 0xea672615, 0xbfe7ffff, 0xfffffffe, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a855e, 0xbfe7ffff, 0xfffffffe, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff30b6d, 0x796a4da6, 0xbfe7ffff, 0xfffffffe, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff2258e, 0x9185104f, 0xbfe7ffff, 0xfffffffe, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff14b1d, 0xd5f90cdf, 0xbfe7ffff, 0xfffffffe, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbff07c6c, 0x6947a6a6, 0xbfe7ffff, 0xfffffffe, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f697, 0xbfe7ffff, 0xfffffffe, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfee047c, 0x2c6b0665, 0xbfe7ffff, 0xfffffffe, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfecac7c, 0x57846f9a, 0xbfe7ffff, 0xfffffffe, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfeb6a21, 0xebeb0204, 0xbfe7ffff, 0xfffffffe, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfea3c5a, 0x45f4ab4c, 0xbfe7ffff, 0xfffffffe, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfe7ffff, 0xfffffffe, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe819d0, 0xb7158a48, 0xbfe7ffff, 0xfffffffe, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe722a5, 0x98d15d35, 0xbfe7ffff, 0xfffffffe, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a86, 0xbfe7ffff, 0xfffffffe, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe562a0, 0x7dc47c8a, 0xbfe7ffff, 0xfffffffe, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0043f37, 0x08e537ed, 0xbfe66666, 0x66666664, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0040d72, 0x6e9f7ad5, 0xbfe66666, 0x66666664, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc003d82a, 0x5408834e, 0xbfe66666, 0x66666664, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0039f10, 0x8a1dc770, 0xbfe66666, 0x66666664, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc00361d1, 0x62e61b8c, 0xbfe66666, 0x66666664, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0032014, 0x3b9f4160, 0xbfe66666, 0x66666664, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe66666, 0x66666664, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0028dab, 0x4b5b59d0, 0xbfe66666, 0x66666664, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0023c41, 0xea611604, 0xbfe66666, 0x66666664, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc001e4e5, 0x5817921e, 0xbfe66666, 0x66666664, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0018743, 0x06ef5824, 0xbfe66666, 0x66666664, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0012317, 0x0c990104, 0xbfe66666, 0x66666664, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc000b833, 0xbe165cc8, 0xbfe66666, 0x66666664, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe66666, 0x66666664, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xbfff9c6b, 0x238c6434, 0xbfe66666, 0x66666664, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffe9f02, 0x0021cec6, 0xbfe66666, 0x66666664, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffd95e5, 0xac22d08b, 0xbfe66666, 0x66666664, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffc829e, 0xbb6db38c, 0xbfe66666, 0x66666664, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffb6731, 0x2cd2f433, 0xbfe66666, 0x66666664, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa460e, 0xa017978f, 0xbfe66666, 0x66666664, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe66666, 0x66666664, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff7fde8, 0x0870c29e, 0xbfe66666, 0x66666664, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff6dcc5, 0x7bb565fa, 0xbfe66666, 0x66666664, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff5c157, 0xed1aa6a1, 0xbfe66666, 0x66666664, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff4ae10, 0xfc6589a2, 0xbfe66666, 0x66666664, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff3a4f4, 0xa8668b67, 0xbfe66666, 0x66666664, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff2a78b, 0x84fbf5fa, 0xbfe66666, 0x66666664, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe42, 0xbfe66666, 0x66666664, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff0d38f, 0x2c5ba09c, 0xbfe66666, 0x66666664, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfeffb91, 0x1eacb04d, 0xbfe66666, 0x66666664, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfee6ae1, 0x355353cb, 0xbfe66666, 0x66666664, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfecf457, 0xf0b26be3, 0xbfe66666, 0x66666664, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfeb96e5, 0xa78c5c4d, 0xbfe66666, 0x66666664, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfea5140, 0x23a34d1b, 0xbfe66666, 0x66666664, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d13, 0xbfe66666, 0x66666664, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe8079c, 0x6293aeda, 0xbfe66666, 0x66666664, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe700a7, 0xc578462f, 0xbfe66666, 0x66666664, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe60bab, 0x2899969c, 0xbfe66666, 0x66666664, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe52744, 0x00eea726, 0xbfe66666, 0x66666664, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe45223, 0x9692c90b, 0xbfe66666, 0x66666664, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0048590, 0xb7aedd64, 0xbfe4cccc, 0xccccccca, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0045514, 0x33f00783, 0xbfe4cccc, 0xccccccca, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc00420fd, 0x07447553, 0xbfe4cccc, 0xccccccca, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc003e8f3, 0xacb51f93, 0xbfe4cccc, 0xccccccca, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc003ac98, 0xf27e8652, 0xbfe4cccc, 0xccccccca, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0036b86, 0x251cd70e, 0xbfe4cccc, 0xccccccca, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc003254d, 0xb30ae9d4, 0xbfe4cccc, 0xccccccca, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe4cccc, 0xccccccca, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc002879c, 0x26a5479d, 0xbfe4cccc, 0xccccccca, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0022f36, 0x8bf3da20, 0xbfe4cccc, 0xccccccca, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc001cfdb, 0x0358ca07, 0xbfe4cccc, 0xccccccca, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0016925, 0x7715b184, 0xbfe4cccc, 0xccccccca, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc000fac7, 0xc0872c2c, 0xbfe4cccc, 0xccccccca, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc0008495, 0x326f4bf1, 0xbfe4cccc, 0xccccccca, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc000068f, 0xdf56fb0a, 0xbfe4cccc, 0xccccccca, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbfff01ec, 0xffc750b0, 0xbfe4cccc, 0xccccccca, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffde8a2, 0x25150890, 0xbfe4cccc, 0xccccccca, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffcc2f3, 0x2876c449, 0xbfe4cccc, 0xccccccca, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffb933b, 0xc05799c0, 0xbfe4cccc, 0xccccccca, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa5c70, 0x7de844b3, 0xbfe4cccc, 0xccccccca, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe4cccc, 0xccccccca, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff7e786, 0x2aa01579, 0xbfe4cccc, 0xccccccca, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff6b0ba, 0xe830c06d, 0xbfe4cccc, 0xccccccca, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff58103, 0x801195e3, 0xbfe4cccc, 0xccccccca, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff45b54, 0x8373519d, 0xbfe4cccc, 0xccccccca, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff34209, 0xa8c1097d, 0xbfe4cccc, 0xccccccca, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff236d6, 0xe9da641a, 0xbfe4cccc, 0xccccccca, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff13acc, 0x43a9c24b, 0xbfe4cccc, 0xccccccca, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbff04e67, 0x277a01d5, 0xbfe4cccc, 0xccccccca, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfeee357, 0x74b9ee4d, 0xbfe4cccc, 0xccccccca, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfed4881, 0x43ad8c3f, 0xbfe4cccc, 0xccccccca, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfebcb13, 0x21414bdb, 0xbfe4cccc, 0xccccccca, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfea697c, 0xb67b95e9, 0xbfe4cccc, 0xccccccca, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d13, 0xbfe4cccc, 0xccccccca, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe7f2b6, 0x84e50d0b, 0xbfe4cccc, 0xccccccca, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe6d9d4, 0xbc9d5822, 0xbfe4cccc, 0xccccccca, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe5d589, 0x87169b13, 0xbfe4cccc, 0xccccccca, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe4e41e, 0x9e3c3610, 0xbfe4cccc, 0xccccccca, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe403f9, 0x33fedf12, 0xbfe4cccc, 0xccccccca, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe3339c, 0x81509652, 0xbfe4cccc, 0xccccccca, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfe33333, 0x33333330, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc004a04f, 0x5f80df4c, 0xbfe33333, 0x33333330, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfe33333, 0x33333330, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0043726, 0xeb5fa0c4, 0xbfe33333, 0x33333330, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfe33333, 0x33333330, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfe33333, 0x33333330, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc00376b7, 0x14052da1, 0xbfe33333, 0x33333330, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0032b5c, 0xd7c0fc08, 0xbfe33333, 0x33333330, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe33333, 0x33333330, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc002807f, 0xb6bd9fb0, 0xbfe33333, 0x33333330, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfe33333, 0x33333330, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfe33333, 0x33333330, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfe33333, 0x33333330, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc000ca7c, 0xc2d0d7fc, 0xbfe33333, 0x33333330, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe33333, 0x33333330, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbfff730b, 0xd281f69a, 0xbfe33333, 0x33333330, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfe33333, 0x33333330, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbfe33333, 0x33333330, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffbc66e, 0x44cbc073, 0xbfe33333, 0x33333330, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa7687, 0x3ac2bc7b, 0xbfe33333, 0x33333330, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe33333, 0x33333330, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff7cd6f, 0x6dc59db2, 0xbfe33333, 0x33333330, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff67d88, 0x63bc99ba, 0xbfe33333, 0x33333330, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff5368c, 0x951e9cfa, 0xbfe33333, 0x33333330, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a855d, 0xbfe33333, 0x33333330, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff2d0ea, 0xd6066392, 0xbfe33333, 0x33333330, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe41, 0xbfe33333, 0x33333330, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff0aefd, 0x22e6aa34, 0xbfe33333, 0x33333330, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f696, 0xbfe33333, 0x33333330, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfedac67, 0x0561bb4a, 0xbfe33333, 0x33333330, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfec08aa, 0xe496efa0, 0xbfe33333, 0x33333330, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfea85ee, 0x761a359c, 0xbfe33333, 0x33333330, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfe33333, 0x33333330, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe7da79, 0xf20cc43d, 0xbfe33333, 0x33333330, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe6ad11, 0x00fbfdd9, 0xbfe33333, 0x33333330, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe5977a, 0x5103ea8c, 0xbfe33333, 0x33333330, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe4978f, 0xa3269edb, 0xbfe33333, 0x33333330, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe3ab51, 0xa392314e, 0xbfe33333, 0x33333330, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd6066390, 0xbfe33333, 0x33333330, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe206af, 0xd30d372c, 0xbfe33333, 0x33333330, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0051c28, 0xaaf491e0, 0xbfe19999, 0x99999996, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc004ef33, 0x3421a553, 0xbfe19999, 0x99999996, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc004be8d, 0x75c60da4, 0xbfe19999, 0x99999996, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc00489ce, 0x32c7e50e, 0xbfe19999, 0x99999996, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc004507f, 0x4d109f2a, 0xbfe19999, 0x99999996, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc004121c, 0xb53cd827, 0xbfe19999, 0x99999996, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc003ce13, 0xa64eb186, 0xbfe19999, 0x99999996, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc00383c2, 0x72726984, 0xbfe19999, 0x99999996, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0033279, 0x47a8a3f5, 0xbfe19999, 0x99999996, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe19999, 0x99999996, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0027809, 0x3f2fcc25, 0xbfe19999, 0x99999996, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0020d5d, 0x6b1c0b70, 0xbfe19999, 0x99999996, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc00198c4, 0x031217a4, 0xbfe19999, 0x99999996, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc00119a6, 0xfe19b276, 0xbfe19999, 0x99999996, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0008fa7, 0x2899ef94, 0xbfe19999, 0x99999996, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xbffff572, 0xaded0be8, 0xbfe19999, 0x99999996, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbffeb68c, 0x3ba726dd, 0xbfe19999, 0x99999996, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffd648c, 0xd67db72a, 0xbfe19999, 0x99999996, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffc02a9, 0x647f0db4, 0xbfe19999, 0x99999996, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffa9553, 0x1c6d8e5d, 0xbfe19999, 0x99999996, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe19999, 0x99999996, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff7aea3, 0x8c1acbce, 0xbfe19999, 0x99999996, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff6414d, 0x44094c78, 0xbfe19999, 0x99999996, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff4df69, 0xd20aa302, 0xbfe19999, 0x99999996, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff38d6a, 0x6ce1334f, 0xbfe19999, 0x99999996, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff24e83, 0xfa9b4e45, 0xbfe19999, 0x99999996, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff124a8, 0x57547b04, 0xbfe19999, 0x99999996, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbff010a8, 0xac54f541, 0xbfe19999, 0x99999996, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfee24dd, 0x44c855cb, 0xbfe19999, 0x99999996, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfec5277, 0xa4a0869c, 0xbfe19999, 0x99999996, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfeaa7c8, 0x545183c7, 0xbfe19999, 0x99999996, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfe19999, 0x99999996, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe7be08, 0x326e2489, 0xbfe19999, 0x99999996, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe678e3, 0x87470e4a, 0xbfe19999, 0x99999996, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe54f9e, 0xb7d5ee43, 0xbfe19999, 0x99999996, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe43f7a, 0x7c1d53c1, 0xbfe19999, 0x99999996, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe345f0, 0x1cce37b5, 0xbfe19999, 0x99999996, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe260b4, 0x85f12028, 0xbfe19999, 0x99999996, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe18db7, 0x79f87dcf, 0xbfe19999, 0x99999996, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfe0cb20, 0x808a1f11, 0xbfe19999, 0x99999996, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfdfffff, 0xfffffff9, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc00541c5, 0x5d5d64c1, 0xbfdfffff, 0xfffffff9, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0051371, 0xab22738d, 0xbfdfffff, 0xfffffff9, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc004e102, 0xc80931dc, 0xbfdfffff, 0xfffffff9, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc004a9f8, 0x694c6d6c, 0xbfdfffff, 0xfffffff9, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfdfffff, 0xfffffff9, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0042bb5, 0xf776eb80, 0xbfdfffff, 0xfffffff9, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc003e31d, 0xfb0d799d, 0xbfdfffff, 0xfffffff9, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfdfffff, 0xfffffff9, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0033aef, 0xbf36777f, 0xbfdfffff, 0xfffffff9, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfdfffff, 0xfffffff9, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0026dcb, 0xd423977c, 0xbfdfffff, 0xfffffff9, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfdfffff, 0xfffffff9, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc00173c1, 0xf5810bb7, 0xbfdfffff, 0xfffffff9, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfdfffff, 0xfffffff9, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfdfffff, 0xfffffff9, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbfdfffff, 0xfffffff9, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffdcbc9, 0xedcbd8d9, 0xbfdfffff, 0xfffffff9, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffc4a83, 0x936311d8, 0xbfdfffff, 0xfffffff9, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffaba39, 0x7c7259db, 0xbfdfffff, 0xfffffff9, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfdfffff, 0xfffffff9, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff789bd, 0x2c160050, 0xbfdfffff, 0xfffffff9, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff5f973, 0x15254853, 0xbfdfffff, 0xfffffff9, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff4782c, 0xbabc8153, 0xbfdfffff, 0xfffffff9, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff30b6d, 0x796a4da4, 0xbfdfffff, 0xfffffff9, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe41, 0xbfdfffff, 0xfffffff9, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbff07c6c, 0x6947a6a4, 0xbfdfffff, 0xfffffff9, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfeeb8e5, 0x7b0c857c, 0xbfdfffff, 0xfffffff9, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfecac7c, 0x57846f97, 0xbfdfffff, 0xfffffff9, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfead0be, 0x0082566c, 0xbfdfffff, 0xfffffff9, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfdfffff, 0xfffffff9, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfe79c2e, 0x5436d65d, 0xbfdfffff, 0xfffffff9, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a84, 0xbfdfffff, 0xfffffff9, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe4fb75, 0x64dacde6, 0xbfdfffff, 0xfffffff9, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe3d915, 0x7335065a, 0xbfdfffff, 0xfffffff9, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd606638f, 0xbfdfffff, 0xfffffff9, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe1e00b, 0xabdefead, 0xbfdfffff, 0xfffffff9, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe103e2, 0x30ebeced, 0xbfdfffff, 0xfffffff9, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe03a26, 0xa486e62b, 0xbfdfffff, 0xfffffff9, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfdf01af, 0xb73642b2, 0xbfdfffff, 0xfffffff9, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc005bffa, 0x17065de2, 0xbfdccccc, 0xccccccc6, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc00597ff, 0xd521f2aa, 0xbfdccccc, 0xccccccc6, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfdccccc, 0xccccccc6, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0053ccf, 0xe79b8f8f, 0xbfdccccc, 0xccccccc6, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc005089b, 0xaf0d60e5, 0xbfdccccc, 0xccccccc6, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfdccccc, 0xccccccc6, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0048fe1, 0xf1cd42a1, 0xbfdccccc, 0xccccccc6, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc00449d3, 0x87509221, 0xbfdccccc, 0xccccccc6, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfdccccc, 0xccccccc6, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc003a59b, 0x934a3835, 0xbfdccccc, 0xccccccc6, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc003452d, 0x2a42ac29, 0xbfdccccc, 0xccccccc6, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfdccccc, 0xccccccc6, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0026127, 0x862b05f6, 0xbfdccccc, 0xccccccc6, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc001dace, 0xaa5dc056, 0xbfdccccc, 0xccccccc6, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfdccccc, 0xccccccc6, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc0009f87, 0x5343d018, 0xbfdccccc, 0xccccccc6, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xbfffd307, 0x52e3200b, 0xbfdccccc, 0xccccccc6, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4cf, 0xbfdccccc, 0xccccccc6, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffca1a6, 0x56770bcf, 0xbfdccccc, 0xccccccc6, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffae73b, 0xd5e44e59, 0xbfdccccc, 0xccccccc6, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfdccccc, 0xccccccc6, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff75cba, 0xd2a40bd2, 0xbfdccccc, 0xccccccc6, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff5a250, 0x52114e5c, 0xbfdccccc, 0xccccccc6, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a855c, 0xbfdccccc, 0xccccccc6, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff270ef, 0x55a53a20, 0xbfdccccc, 0xccccccc6, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff104e8, 0x0200b9fc, 0xbfdccccc, 0xccccccc6, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f693, 0xbfdccccc, 0xccccccc6, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfed1cb2, 0xa799b2ff, 0xbfdccccc, 0xccccccc6, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfeb034f, 0x38649c81, 0xbfdccccc, 0xccccccc6, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfdccccc, 0xccccccc6, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfe77338, 0xa80603b8, 0xbfdccccc, 0xccccccc6, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfe5f17f, 0x03e7d388, 0xbfdccccc, 0xccccccc6, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe4978f, 0xa3269edb, 0xbfdccccc, 0xccccccc6, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe3609f, 0x33ce6bd8, 0xbfdccccc, 0xccccccc6, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe24865, 0x89dba9d9, 0xbfdccccc, 0xccccccc6, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cdb, 0xbfdccccc, 0xccccccc6, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfe0657e, 0x94db30ca, 0xbfdccccc, 0xccccccc6, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfdf295b, 0x6544ec43, 0xbfdccccc, 0xccccccc6, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb44, 0xbfdccccc, 0xccccccc6, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfdc4fdb, 0xf911d369, 0xbfdccccc, 0xccccccc6, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfd99999, 0x99999993, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc005f1ce, 0xcb0d4d6e, 0xbfd99999, 0x99999993, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc005c975, 0x54f4b39f, 0xbfd99999, 0x99999993, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0059d2f, 0x241f85a8, 0xbfd99999, 0x99999993, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd99999, 0x99999993, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc005368c, 0x951e9cfd, 0xbfd99999, 0x99999993, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc004fac5, 0x404fe6dc, 0xbfd99999, 0x99999993, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc004b831, 0x3ddf1778, 0xbfd99999, 0x99999993, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfd99999, 0x99999993, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0041a34, 0xfb542c00, 0xbfd99999, 0x99999993, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfd99999, 0x99999993, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc00351d1, 0x783b3dae, 0xbfd99999, 0x99999993, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd99999, 0x99999993, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc0025127, 0x9b802819, 0xbfd99999, 0x99999993, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfd99999, 0x99999993, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc0010900, 0x9519d639, 0xbfd99999, 0x99999993, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfd99999, 0x99999993, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbffedf81, 0xa4bd64d3, 0xbfd99999, 0x99999993, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffd0d6a, 0x1369bd32, 0xbfd99999, 0x99999993, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffb1f56, 0xfdeef00d, 0xbfd99999, 0x99999993, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfd99999, 0x99999993, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff7249f, 0xaa996a1d, 0xbfd99999, 0x99999993, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff5368c, 0x951e9cf8, 0xbfd99999, 0x99999993, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff36475, 0x03caf558, 0xbfd99999, 0x99999993, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe40, 0xbfd99999, 0x99999993, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbff031f5, 0x7e54adba, 0xbfd99999, 0x99999993, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfedac67, 0x0561bb47, 0xbfd99999, 0x99999993, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfeb434e, 0xe31013f5, 0xbfd99999, 0x99999993, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d11, 0xbfd99999, 0x99999993, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe740a7, 0x7023bda2, 0xbfd99999, 0x99999993, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfe5977a, 0x5103ea8b, 0xbfd99999, 0x99999993, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfe41f19, 0x63c00458, 0xbfd99999, 0x99999993, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd606638f, 0xbfd99999, 0x99999993, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfe1a728, 0x5994567c, 0xbfd99999, 0x99999993, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfe09cd8, 0x4fd118ed, 0xbfd99999, 0x99999993, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfdf5b75, 0xf92c80d1, 0xbfd99999, 0x99999993, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb43, 0xbfd99999, 0x99999993, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfdc2661, 0x81253b7c, 0xbfd99999, 0x99999993, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfdac42f, 0xfa7bcbc4, 0xbfd99999, 0x99999993, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfd98164, 0x49b6fd49, 0xbfd99999, 0x99999993, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0067078, 0xc2eef45e, 0xbfd66666, 0x66666660, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0064f0e, 0xb4680650, 0xbfd66666, 0x66666660, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0062a65, 0x7a259a4e, 0xbfd66666, 0x66666660, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0060204, 0xbe520694, 0xbfd66666, 0x66666660, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc005d55d, 0x7bcaa899, 0xbfd66666, 0x66666660, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc005a3c4, 0xf2e49eb6, 0xbfd66666, 0x66666660, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd66666, 0x66666660, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0052e63, 0xcbf6f7b3, 0xbfd66666, 0x66666660, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc004e87c, 0x3b956ba8, 0xbfd66666, 0x66666660, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0049952, 0x004c912f, 0xbfd66666, 0x66666660, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0043f37, 0x08e537ed, 0xbfd66666, 0x66666660, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc003d82a, 0x5408834e, 0xbfd66666, 0x66666660, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc00361d1, 0x62e61b8c, 0xbfd66666, 0x66666660, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd66666, 0x66666660, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0023c41, 0xea611604, 0xbfd66666, 0x66666660, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc0018743, 0x06ef5824, 0xbfd66666, 0x66666660, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc000b833, 0xbe165cc8, 0xbfd66666, 0x66666660, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xbfff9c6b, 0x238c6433, 0xbfd66666, 0x66666660, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffd95e5, 0xac22d08a, 0xbfd66666, 0x66666660, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffb6731, 0x2cd2f431, 0xbfd66666, 0x66666660, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d14, 0xbfd66666, 0x66666660, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff6dcc5, 0x7bb565f8, 0xbfd66666, 0x66666660, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff4ae10, 0xfc6589a0, 0xbfd66666, 0x66666660, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff2a78b, 0x84fbf5f7, 0xbfd66666, 0x66666660, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbff0d38f, 0x2c5ba099, 0xbfd66666, 0x66666660, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfee6ae1, 0x355353c6, 0xbfd66666, 0x66666660, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfeb96e5, 0xa78c5c48, 0xbfd66666, 0x66666660, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d10, 0xbfd66666, 0x66666660, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfe700a7, 0xc578462c, 0xbfd66666, 0x66666660, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe52744, 0x00eea723, 0xbfd66666, 0x66666660, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfe38b11, 0x2d7bd4a6, 0xbfd66666, 0x66666660, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfe222a5, 0x4fde6fa1, 0xbfd66666, 0x66666660, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfe0e5fc, 0x62bb05bd, 0xbfd66666, 0x66666660, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfdf9cbc, 0x4269ab1e, 0xbfd66666, 0x66666660, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb43, 0xbfd66666, 0x66666660, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfdbf1b3, 0x0afc730f, 0xbfd66666, 0x66666660, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfda64ee, 0xc3cc23f1, 0xbfd66666, 0x66666660, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfd8ffb4, 0xaf91341a, 0xbfd66666, 0x66666660, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfd7bcae, 0xd0f4964a, 0xbfd66666, 0x66666660, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfd69764, 0xfee13639, 0xbfd66666, 0x66666660, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc006cd14, 0x07805738, 0xbfd33333, 0x3333332d, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc006af8a, 0xb51a6805, 0xbfd33333, 0x3333332d, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfd33333, 0x3333332d, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0066b1c, 0x486d572a, 0xbfd33333, 0x3333332d, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0064338, 0x2c07913b, 0xbfd33333, 0x3333332d, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfd33333, 0x3333332d, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc005e4c3, 0x6ca0118b, 0xbfd33333, 0x3333332d, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc005ac69, 0x1f0f489b, 0xbfd33333, 0x3333332d, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd33333, 0x3333332d, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc0052351, 0xd5cc5410, 0xbfd33333, 0x3333332d, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfd33333, 0x3333332d, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfd33333, 0x3333332d, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfd33333, 0x3333332d, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc00376b7, 0x14052da1, 0xbfd33333, 0x3333332d, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd33333, 0x3333332d, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfd33333, 0x3333332d, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfd33333, 0x3333332d, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfd33333, 0x3333332d, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4ce, 0xbfd33333, 0x3333332d, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffbc66e, 0x44cbc071, 0xbfd33333, 0x3333332d, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d13, 0xbfd33333, 0x3333332d, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff67d88, 0x63bc99b7, 0xbfd33333, 0x3333332d, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a855a, 0xbfd33333, 0x3333332d, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe3e, 0xbfd33333, 0x3333332d, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f68f, 0xbfd33333, 0x3333332d, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfec08aa, 0xe496ef9b, 0xbfd33333, 0x3333332d, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d0e, 0xbfd33333, 0x3333332d, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe6ad11, 0x00fbfdd6, 0xbfd33333, 0x3333332d, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfe4978f, 0xa3269ed9, 0xbfd33333, 0x3333332d, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd606638e, 0xbfd33333, 0x3333332d, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cd9, 0xbfd33333, 0x3333332d, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfdff54b, 0xf3bec834, 0xbfd33333, 0x3333332d, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb42, 0xbfd33333, 0x3333332d, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfdbac91, 0xa9a723e0, 0xbfd33333, 0x3333332d, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfd9e9bf, 0x3d20dc65, 0xbfd33333, 0x3333332d, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfd85a37, 0x6b677db4, 0xbfd33333, 0x3333332d, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfd6f619, 0x41e4dee5, 0xbfd33333, 0x3333332d, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfd5b6f8, 0x5eb6af69, 0xbfd33333, 0x3333332d, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269ed7, 0xbfd33333, 0x3333332d, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfd39384, 0xf94e2896, 0xbfd33333, 0x3333332d, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfcfffff, 0xfffffff4, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc00712fb, 0x97e1e344, 0xbfcfffff, 0xfffffff4, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc006f715, 0x259aea15, 0xbfcfffff, 0xfffffff4, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc006d825, 0xfdaafadb, 0xbfcfffff, 0xfffffff4, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc006b5ac, 0x6d632fa0, 0xbfcfffff, 0xfffffff4, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfcfffff, 0xfffffff4, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0066377, 0xfe555c41, 0xbfcfffff, 0xfffffff4, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc0063202, 0x7e829b4d, 0xbfcfffff, 0xfffffff4, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc005f973, 0x15254857, 0xbfcfffff, 0xfffffff4, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc005b83f, 0xa76fbdb1, 0xbfcfffff, 0xfffffff4, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfcfffff, 0xfffffff4, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0051371, 0xab22738c, 0xbfcfffff, 0xfffffff4, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc004a9f8, 0x694c6d6c, 0xbfcfffff, 0xfffffff4, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc0042bb5, 0xf776eb80, 0xbfcfffff, 0xfffffff4, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfcfffff, 0xfffffff4, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfcfffff, 0xfffffff4, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfcfffff, 0xfffffff4, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfcfffff, 0xfffffff4, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xbfff3889, 0x2f1e0c86, 0xbfcfffff, 0xfffffff4, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffc4a83, 0x936311d6, 0xbfcfffff, 0xfffffff4, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d13, 0xbfcfffff, 0xfffffff4, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff5f973, 0x15254850, 0xbfcfffff, 0xfffffff4, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff30b6d, 0x796a4da1, 0xbfcfffff, 0xfffffff4, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbff07c6c, 0x6947a6a1, 0xbfcfffff, 0xfffffff4, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfecac7c, 0x57846f91, 0xbfcfffff, 0xfffffff4, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d0c, 0xbfcfffff, 0xfffffff4, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a80, 0xbfcfffff, 0xfffffff4, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe3d915, 0x73350658, 0xbfcfffff, 0xfffffff4, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfe1e00b, 0xabdefeab, 0xbfcfffff, 0xfffffff4, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfe03a26, 0xa486e62a, 0xbfcfffff, 0xfffffff4, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb41, 0xbfcfffff, 0xfffffff4, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfdb4ddd, 0x66a37b33, 0xbfcfffff, 0xfffffff4, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfd94441, 0xf8f725fe, 0xbfcfffff, 0xfffffff4, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfd77fc6, 0xae0c8e55, 0xbfcfffff, 0xfffffff4, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfd5f41a, 0xaf7686b1, 0xbfcfffff, 0xfffffff4, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269ed6, 0xbfcfffff, 0xfffffff4, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfd36277, 0x3707ebc1, 0xbfcfffff, 0xfffffff4, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfd24eaa, 0xb4c991e4, 0xbfcfffff, 0xfffffff4, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfd15731, 0x754a1817, 0xbfcfffff, 0xfffffff4, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfd077fd, 0xe3124ea1, 0xbfcfffff, 0xfffffff4, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc0078db7, 0x34b4bab8, 0xbfc99999, 0x9999998e, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0077907, 0x8c2f83ec, 0xbfc99999, 0x9999998e, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0076225, 0xd32abdbd, 0xbfc99999, 0x9999998e, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc00748b5, 0x43f409e0, 0xbfc99999, 0x9999998e, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfc99999, 0x9999998e, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0070c44, 0x9f55a998, 0xbfc99999, 0x9999998e, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc006e806, 0x2854db5f, 0xbfc99999, 0x9999998e, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc006bea7, 0xebdbbf5d, 0xbfc99999, 0x9999998e, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfc99999, 0x9999998e, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc00657b2, 0xe092b036, 0xbfc99999, 0x9999998e, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfc99999, 0x9999998e, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc005c975, 0x54f4b39f, 0xbfc99999, 0x9999998e, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfc99999, 0x9999998e, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc004fac5, 0x404fe6dc, 0xbfc99999, 0x9999998e, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfc99999, 0x9999998e, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfc99999, 0x9999998e, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfc99999, 0x9999998e, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfc99999, 0x9999998e, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df5, 0xbfc99999, 0x9999998e, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffd0d6a, 0x1369bd2f, 0xbfc99999, 0x9999998e, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d11, 0xbfc99999, 0x9999998e, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff5368c, 0x951e9cf4, 0xbfc99999, 0x9999998e, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe3c, 0xbfc99999, 0x9999998e, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbfedac67, 0x0561bb3f, 0xbfc99999, 0x9999998e, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d09, 0xbfc99999, 0x9999998e, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfe5977a, 0x5103ea85, 0xbfc99999, 0x9999998e, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd606638a, 0xbfc99999, 0x9999998e, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfe09cd8, 0x4fd118e9, 0xbfc99999, 0x9999998e, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb3f, 0xbfc99999, 0x9999998e, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfdac42f, 0xfa7bcbbf, 0xbfc99999, 0x9999998e, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfd85a37, 0x6b677db1, 0xbfc99999, 0x9999998e, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfd65243, 0x9d8be709, 0xbfc99999, 0x9999998e, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269ed4, 0xbfc99999, 0x9999998e, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfd31a9b, 0x43436dd5, 0xbfc99999, 0x9999998e, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfd1cfa9, 0x5f7a8dc3, 0xbfc99999, 0x9999998e, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfd0adb5, 0xa7741bf9, 0xbfc99999, 0x9999998e, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfcf5b75, 0xf92c80ca, 0xbfc99999, 0x9999998e, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfcd9461, 0x05023378, 0xbfc99999, 0x9999998e, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfcbfd58, 0x1196f5af, 0xbfc99999, 0x9999998e, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfca8f3c, 0x814a92c5, 0xbfc99999, 0x9999998e, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc007f10e, 0x1dc6b049, 0xbfc33333, 0x33333328, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc007e142, 0xd82322eb, 0xbfc33333, 0x33333328, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc007cfc1, 0xdc00636b, 0xbfc33333, 0x33333328, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc007bc40, 0xca9216fe, 0xbfc33333, 0x33333328, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc007a663, 0x9f874769, 0xbfc33333, 0x33333328, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0078db7, 0x34b4bab8, 0xbfc33333, 0x33333328, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc00771a9, 0xa0af69de, 0xbfc33333, 0x33333328, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc007517f, 0x6a2ae180, 0xbfc33333, 0x33333328, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfc33333, 0x33333328, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc00700b2, 0x93276810, 0xbfc33333, 0x33333328, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc006cd14, 0x07805738, 0xbfc33333, 0x33333328, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfc33333, 0x33333328, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0064338, 0x2c07913b, 0xbfc33333, 0x33333328, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc005e4c3, 0x6ca0118b, 0xbfc33333, 0x33333328, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfc33333, 0x33333328, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc004cf33, 0xdec5e9e1, 0xbfc33333, 0x33333328, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfc33333, 0x33333328, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfc33333, 0x33333328, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xc0014538, 0x5fa3af70, 0xbfc33333, 0x33333328, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xbffe47df, 0x3d0dd4cb, 0xbfc33333, 0x33333328, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d0f, 0xbfc33333, 0x33333328, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff3fc17, 0x6b7a8555, 0xbfc33333, 0x33333328, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbfef730b, 0xd281f685, 0xbfc33333, 0x33333328, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442d05, 0xbfc33333, 0x33333328, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfe4978f, 0xa3269ed1, 0xbfc33333, 0x33333328, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cd4, 0xbfc33333, 0x33333328, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb39, 0xbfc33333, 0x33333328, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfd9e9bf, 0x3d20dc5e, 0xbfc33333, 0x33333328, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfd6f619, 0x41e4dee0, 0xbfc33333, 0x33333328, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269ed2, 0xbfc33333, 0x33333328, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfd2a73a, 0x661eaef8, 0xbfc33333, 0x33333328, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfd10a46, 0x08e6283d, 0xbfc33333, 0x33333328, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfcf5b75, 0xf92c80c6, 0xbfc33333, 0x33333328, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfcd07be, 0xa194b97b, 0xbfc33333, 0x33333328, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfcb051b, 0x394c3396, 0xbfc33333, 0x33333328, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfc94441, 0xf8f725f8, 0xbfc33333, 0x33333328, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfc7b97b, 0x4bce5af0, 0xbfc33333, 0x33333328, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfc65ba8, 0x9b21619a, 0xbfc33333, 0x33333328, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfc52397, 0x843c9acd, 0xbfc33333, 0x33333328, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfc40b87, 0xc210a2d5, 0xbfc33333, 0x33333328, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc00855dc, 0x402d16b7, 0xbfb99999, 0x99999983, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc0084b31, 0x9bd4918d, 0xbfb99999, 0x99999983, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc0083f5b, 0x13741c78, 0xbfb99999, 0x99999983, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc0083224, 0x9ea440f7, 0xbfb99999, 0x99999983, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc008234d, 0x7f6ecb9e, 0xbfb99999, 0x99999983, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc0081284, 0x26c22f58, 0xbfb99999, 0x99999983, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc007ff60, 0x67fcc98b, 0xbfb99999, 0x99999983, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc007e95b, 0x1e3a76c5, 0xbfb99999, 0x99999983, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc007cfc1, 0xdc00636b, 0xbfb99999, 0x99999983, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc007b1a4, 0x4c26bccb, 0xbfb99999, 0x99999983, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc0078db7, 0x34b4bab9, 0xbfb99999, 0x99999983, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0076225, 0xd32abdbd, 0xbfb99999, 0x99999983, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc0072c43, 0xf4b1650c, 0xbfb99999, 0x99999983, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc006e806, 0x2854db60, 0xbfb99999, 0x99999983, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593e, 0xbfb99999, 0x99999983, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc00616b4, 0x66d73d62, 0xbfb99999, 0x99999983, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5b0, 0xbfb99999, 0x99999983, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfb99999, 0x99999983, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfb99999, 0x99999983, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xc000468a, 0x8ace4df4, 0xbfb99999, 0x99999983, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442d0a, 0xbfb99999, 0x99999983, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe33, 0xbfb99999, 0x99999983, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442cfc, 0xbfb99999, 0x99999983, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbfe2d0ea, 0xd606637f, 0xbfb99999, 0x99999983, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb2c, 0xbfb99999, 0x99999983, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfd85a37, 0x6b677da4, 0xbfb99999, 0x99999983, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269eca, 0xbfb99999, 0x99999983, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfd1cfa9, 0x5f7a8dbc, 0xbfb99999, 0x99999983, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfcf5b75, 0xf92c80bc, 0xbfb99999, 0x99999983, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfcbfd58, 0x1196f5a4, 0xbfb99999, 0x99999983, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfc94441, 0xf8f725f1, 0xbfb99999, 0x99999983, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfc70570, 0x81d704ce, 0xbfb99999, 0x99999983, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfc52397, 0x843c9ac7, 0xbfb99999, 0x99999983, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfc38a03, 0x609b6530, 0xbfb99999, 0x99999983, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfc229ae, 0xc47638c9, 0xbfb99999, 0x99999983, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfc0f772, 0xd81fdbf8, 0xbfb99999, 0x99999983, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfbfd5ba, 0x9aac2f4b, 0xbfb99999, 0x99999983, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfbdfad6, 0xb3fd8429, 0xbfb99999, 0x99999983, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfbc5408, 0x1a021411, 0xbfb99999, 0x99999983, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfbad937, 0x0df3715e, 0xbfb99999, 0x99999983, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0xc008bbaa, 0xbde5e29c, 0xbfa99999, 0x9999996c, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0xc008b64a, 0xa934a2c3, 0xbfa99999, 0x9999996c, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0xc008b052, 0x20fc1e46, 0xbfa99999, 0x9999996c, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xc008a9a6, 0x5b3c113d, 0xbfa99999, 0x9999996c, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0xc008a225, 0xe5677921, 0xbfa99999, 0x9999996c, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0xc00899a6, 0x70913360, 0xbfa99999, 0x9999996c, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0xc0088ff1, 0xae5a77dd, 0xbfa99999, 0x9999996c, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0xc00884c0, 0xbf72214b, 0xbfa99999, 0x9999996c, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0xc00877b5, 0x6104e567, 0xbfa99999, 0x9999996c, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0xc008684f, 0x702f7c76, 0xbfa99999, 0x9999996c, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0xc00855dc, 0x402d16b7, 0xbfa99999, 0x9999996c, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0xc0083f5b, 0x13741c78, 0xbfa99999, 0x9999996c, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0xc008234d, 0x7f6ecb9e, 0xbfa99999, 0x9999996c, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0xc007ff60, 0x67fcc98c, 0xbfa99999, 0x9999996c, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0xc007cfc1, 0xdc00636c, 0xbfa99999, 0x9999996c, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0xc0078db7, 0x34b4baba, 0xbfa99999, 0x9999996c, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0xc0072c43, 0xf4b1650d, 0xbfa99999, 0x9999996c, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0xc0068f09, 0x5fdf593f, 0xbfa99999, 0x9999996c, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0xc0056c6e, 0x7397f5b1, 0xbfa99999, 0x9999996c, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfa99999, 0x9999996c, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0xbff921fb, 0x54442cfc, 0xbfa99999, 0x9999996c, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0xbfe921fb, 0x54442cdf, 0xbfa99999, 0x9999996c, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0xbfddac67, 0x0561bb0b, 0xbfa99999, 0x9999996c, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0xbfd4978f, 0xa3269eb3, 0xbfa99999, 0x9999996c, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0xbfcf5b75, 0xf92c809a, 0xbfa99999, 0x9999996c, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0xbfc94441, 0xf8f725d6, 0xbfa99999, 0x9999996c, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0xbfc52397, 0x843c9ab2, 0xbfa99999, 0x9999996c, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0xbfc229ae, 0xc47638b8, 0xbfa99999, 0x9999996c, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0xbfbfd5ba, 0x9aac2f2f, 0xbfa99999, 0x9999996c, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfbc5408, 0x1a0213f9, 0xbfa99999, 0x9999996c, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0xbfb983e2, 0x82e2cc1a, 0xbfa99999, 0x9999996c, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0xbfb7357c, 0x82961441, 0xbfa99999, 0x9999996c, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0xbfb548be, 0x67e8f615, 0xbfa99999, 0x9999996c, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0xbfb3a752, 0x9a4179a3, 0xbfa99999, 0x9999996c, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0xbfb24134, 0xbd36a760, 0xbfa99999, 0x9999996c, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0xbfb10a9c, 0x765f3702, 0xbfa99999, 0x9999996c, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0xbfaff55b, 0xb72cfdaa, 0xbfa99999, 0x9999996c, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0xbfae153e, 0x4206f6b9, 0xbfa99999, 0x9999996c, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0xbfac6a4c, 0xd203b483, 0xbfa99999, 0x9999996c, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0xbfaaec2a, 0xc3e29569, 0xbfa99999, 0x9999996c, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d15, 0x3cb70000, 0x00000000, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d15, 0x3cb70000, 0x00000000, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d13, 0x3cb70000, 0x00000000, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d11, 0x3cb70000, 0x00000000, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x400921fb, 0x54442d0a, 0x3cb70000, 0x00000000, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3cfcbfff, 0xffffffcc, 0x3cb70000, 0x00000000, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3cecbfff, 0xffffffe6, 0x3cb70000, 0x00000000, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ce32aaa, 0xaaaaaa9f, 0x3cb70000, 0x00000000, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3cdcbfff, 0xfffffff2, 0x3cb70000, 0x00000000, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3cd6ffff, 0xfffffff7, 0x3cb70000, 0x00000000, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3cd32aaa, 0xaaaaaaa5, 0x3cb70000, 0x00000000, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3cd06db6, 0xdb6db6d7, 0x3cb70000, 0x00000000, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3cccbfff, 0xfffffffa, 0x3cb70000, 0x00000000, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3cc98e38, 0xe38e38df, 0x3cb70000, 0x00000000, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3cc6ffff, 0xfffffffc, 0x3cb70000, 0x00000000, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3cc4e8ba, 0x2e8ba2e5, 0x3cb70000, 0x00000000, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3cc32aaa, 0xaaaaaaa7, 0x3cb70000, 0x00000000, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3cc1b13b, 0x13b13b10, 0x3cb70000, 0x00000000, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3cc06db6, 0xdb6db6d8, 0x3cb70000, 0x00000000, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3cbeaaaa, 0xaaaaaaa4, 0x3cb70000, 0x00000000, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3cbcbfff, 0xfffffffa, 0x3cb70000, 0x00000000, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3cbb0f0f, 0x0f0f0f09, 0x3cb70000, 0x00000000, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3cb98e38, 0xe38e38de, 0x3cb70000, 0x00000000, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3cb835e5, 0x0d794359, 0x3cb70000, 0x00000000, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4008bbaa, 0xbde5e29b, 0x3fa99999, 0x999999c8, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4008b64a, 0xa934a2c1, 0x3fa99999, 0x999999c8, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4008b052, 0x20fc1e45, 0x3fa99999, 0x999999c8, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4008a9a6, 0x5b3c113c, 0x3fa99999, 0x999999c8, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4008a225, 0xe5677920, 0x3fa99999, 0x999999c8, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x400899a6, 0x7091335e, 0x3fa99999, 0x999999c8, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40088ff1, 0xae5a77db, 0x3fa99999, 0x999999c8, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x400884c0, 0xbf722149, 0x3fa99999, 0x999999c8, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x400877b5, 0x6104e565, 0x3fa99999, 0x999999c8, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4008684f, 0x702f7c73, 0x3fa99999, 0x999999c8, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x400855dc, 0x402d16b4, 0x3fa99999, 0x999999c8, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40083f5b, 0x13741c75, 0x3fa99999, 0x999999c8, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4008234d, 0x7f6ecb9b, 0x3fa99999, 0x999999c8, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4007ff60, 0x67fcc988, 0x3fa99999, 0x999999c8, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4007cfc1, 0xdc006368, 0x3fa99999, 0x999999c8, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x40078db7, 0x34b4bab4, 0x3fa99999, 0x999999c8, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x40072c43, 0xf4b16506, 0x3fa99999, 0x999999c8, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf5936, 0x3fa99999, 0x999999c8, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5a6, 0x3fa99999, 0x999999c8, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321c4, 0x3fa99999, 0x999999c8, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442cfc, 0x3fa99999, 0x999999c8, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fa99999, 0x999999c8, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb66, 0x3fa99999, 0x999999c8, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269ef8, 0x3fa99999, 0x999999c8, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fcf5b75, 0xf92c8105, 0x3fa99999, 0x999999c8, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fc94441, 0xf8f7262e, 0x3fa99999, 0x999999c8, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fc52397, 0x843c9afd, 0x3fa99999, 0x999999c8, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fc229ae, 0xc47638f9, 0x3fa99999, 0x999999c8, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fbfd5ba, 0x9aac2fa1, 0x3fa99999, 0x999999c8, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fbc5408, 0x1a02145e, 0x3fa99999, 0x999999c8, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fb983e2, 0x82e2cc75, 0x3fa99999, 0x999999c8, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fb7357c, 0x82961494, 0x3fa99999, 0x999999c8, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fb548be, 0x67e8f661, 0x3fa99999, 0x999999c8, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fb3a752, 0x9a4179e9, 0x3fa99999, 0x999999c8, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fb24134, 0xbd36a7a2, 0x3fa99999, 0x999999c8, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fb10a9c, 0x765f373f, 0x3fa99999, 0x999999c8, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3faff55b, 0xb72cfe1e, 0x3fa99999, 0x999999c8, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fae153e, 0x4206f724, 0x3fa99999, 0x999999c8, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fac6a4c, 0xd203b4e9, 0x3fa99999, 0x999999c8, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3faaec2a, 0xc3e295c9, 0x3fa99999, 0x999999c8, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x400855dc, 0x402d16b5, 0x3fb99999, 0x999999b1, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40084b31, 0x9bd4918c, 0x3fb99999, 0x999999b1, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40083f5b, 0x13741c76, 0x3fb99999, 0x999999b1, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40083224, 0x9ea440f5, 0x3fb99999, 0x999999b1, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4008234d, 0x7f6ecb9c, 0x3fb99999, 0x999999b1, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40081284, 0x26c22f56, 0x3fb99999, 0x999999b1, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4007ff60, 0x67fcc989, 0x3fb99999, 0x999999b1, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4007e95b, 0x1e3a76c3, 0x3fb99999, 0x999999b1, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4007cfc1, 0xdc006369, 0x3fb99999, 0x999999b1, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4007b1a4, 0x4c26bcc8, 0x3fb99999, 0x999999b1, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40078db7, 0x34b4bab6, 0x3fb99999, 0x999999b1, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40076225, 0xd32abdba, 0x3fb99999, 0x999999b1, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40072c43, 0xf4b16508, 0x3fb99999, 0x999999b1, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4006e806, 0x2854db5c, 0x3fb99999, 0x999999b1, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf5939, 0x3fb99999, 0x999999b1, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x400616b4, 0x66d73d5d, 0x3fb99999, 0x999999b1, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5aa, 0x3fb99999, 0x999999b1, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec2942e, 0x3fb99999, 0x999999b1, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321cb, 0x3fb99999, 0x999999b1, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4dee, 0x3fb99999, 0x999999b1, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d0a, 0x3fb99999, 0x999999b1, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe3f, 0x3fb99999, 0x999999b1, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fb99999, 0x999999b1, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd606639a, 0x3fb99999, 0x999999b1, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb5b, 0x3fb99999, 0x999999b1, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fd85a37, 0x6b677dcb, 0x3fb99999, 0x999999b1, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269eed, 0x3fb99999, 0x999999b1, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fd1cfa9, 0x5f7a8dd9, 0x3fb99999, 0x999999b1, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fcf5b75, 0xf92c80f2, 0x3fb99999, 0x999999b1, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fcbfd58, 0x1196f5d5, 0x3fb99999, 0x999999b1, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fc94441, 0xf8f7261d, 0x3fb99999, 0x999999b1, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fc70570, 0x81d704f6, 0x3fb99999, 0x999999b1, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fc52397, 0x843c9aed, 0x3fb99999, 0x999999b1, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fc38a03, 0x609b6553, 0x3fb99999, 0x999999b1, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fc229ae, 0xc47638e9, 0x3fb99999, 0x999999b1, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fc0f772, 0xd81fdc17, 0x3fb99999, 0x999999b1, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fbfd5ba, 0x9aac2f83, 0x3fb99999, 0x999999b1, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fbdfad6, 0xb3fd845e, 0x3fb99999, 0x999999b1, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fbc5408, 0x1a021443, 0x3fb99999, 0x999999b1, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fbad937, 0x0df3718e, 0x3fb99999, 0x999999b1, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4007f10e, 0x1dc6b047, 0x3fc33333, 0x3333333f, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4007e142, 0xd82322e9, 0x3fc33333, 0x3333333f, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4007cfc1, 0xdc00636a, 0x3fc33333, 0x3333333f, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4007bc40, 0xca9216fd, 0x3fc33333, 0x3333333f, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4007a663, 0x9f874767, 0x3fc33333, 0x3333333f, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40078db7, 0x34b4bab6, 0x3fc33333, 0x3333333f, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x400771a9, 0xa0af69dc, 0x3fc33333, 0x3333333f, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4007517f, 0x6a2ae17e, 0x3fc33333, 0x3333333f, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40072c43, 0xf4b16509, 0x3fc33333, 0x3333333f, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x400700b2, 0x9327680d, 0x3fc33333, 0x3333333f, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4006cd14, 0x07805736, 0x3fc33333, 0x3333333f, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf593a, 0x3fc33333, 0x3333333f, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40064338, 0x2c079138, 0x3fc33333, 0x3333333f, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4005e4c3, 0x6ca01188, 0x3fc33333, 0x3333333f, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ab, 0x3fc33333, 0x3333333f, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x4004cf33, 0xdec5e9dc, 0x3fc33333, 0x3333333f, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x4003fc17, 0x6b7a855c, 0x3fc33333, 0x3333333f, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321ce, 0x3fc33333, 0x3333333f, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af6c, 0x3fc33333, 0x3333333f, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4c5, 0x3fc33333, 0x3333333f, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d0f, 0x3fc33333, 0x3333333f, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855a, 0x3fc33333, 0x3333333f, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f697, 0x3fc33333, 0x3333333f, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fc33333, 0x3333333f, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fe4978f, 0xa3269ee3, 0x3fc33333, 0x3333333f, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce4, 0x3fc33333, 0x3333333f, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb57, 0x3fc33333, 0x3333333f, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fd9e9bf, 0x3d20dc79, 0x3fc33333, 0x3333333f, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fd6f619, 0x41e4def9, 0x3fc33333, 0x3333333f, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269eea, 0x3fc33333, 0x3333333f, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fd2a73a, 0x661eaf0d, 0x3fc33333, 0x3333333f, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fd10a46, 0x08e62851, 0x3fc33333, 0x3333333f, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fcf5b75, 0xf92c80eb, 0x3fc33333, 0x3333333f, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fcd07be, 0xa194b99d, 0x3fc33333, 0x3333333f, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fcb051b, 0x394c33b5, 0x3fc33333, 0x3333333f, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fc94441, 0xf8f72615, 0x3fc33333, 0x3333333f, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fc7b97b, 0x4bce5b0c, 0x3fc33333, 0x3333333f, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fc65ba8, 0x9b2161b4, 0x3fc33333, 0x3333333f, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fc52397, 0x843c9ae6, 0x3fc33333, 0x3333333f, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fc40b87, 0xc210a2ec, 0x3fc33333, 0x3333333f, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40078db7, 0x34b4bab7, 0x3fc99999, 0x999999a6, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40077907, 0x8c2f83ea, 0x3fc99999, 0x999999a6, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40076225, 0xd32abdbb, 0x3fc99999, 0x999999a6, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x400748b5, 0x43f409df, 0x3fc99999, 0x999999a6, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40072c43, 0xf4b16509, 0x3fc99999, 0x999999a6, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40070c44, 0x9f55a997, 0x3fc99999, 0x999999a6, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4006e806, 0x2854db5d, 0x3fc99999, 0x999999a6, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4006bea7, 0xebdbbf5b, 0x3fc99999, 0x999999a6, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fc99999, 0x999999a6, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x400657b2, 0xe092b034, 0x3fc99999, 0x999999a6, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x400616b4, 0x66d73d5e, 0x3fc99999, 0x999999a6, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4005c975, 0x54f4b39c, 0x3fc99999, 0x999999a6, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ac, 0x3fc99999, 0x999999a6, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4004fac5, 0x404fe6d9, 0x3fc99999, 0x999999a6, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec29430, 0x3fc99999, 0x999999a6, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x4003bc1c, 0xc0033270, 0x3fc99999, 0x999999a6, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321ce, 0x3fc99999, 0x999999a6, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x4001b6e1, 0x92ebbe40, 0x3fc99999, 0x999999a6, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df2, 0x3fc99999, 0x999999a6, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd2c, 0x3fc99999, 0x999999a6, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d11, 0x3fc99999, 0x999999a6, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff5368c, 0x951e9cf8, 0x3fc99999, 0x999999a6, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe42, 0x3fc99999, 0x999999a6, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3fedac67, 0x0561bb4e, 0x3fc99999, 0x999999a6, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fc99999, 0x999999a6, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fe5977a, 0x5103ea94, 0x3fc99999, 0x999999a6, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd6066398, 0x3fc99999, 0x999999a6, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe09cd8, 0x4fd118f7, 0x3fc99999, 0x999999a6, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb56, 0x3fc99999, 0x999999a6, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fdac42f, 0xfa7bcbd6, 0x3fc99999, 0x999999a6, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fd85a37, 0x6b677dc6, 0x3fc99999, 0x999999a6, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fd65243, 0x9d8be71c, 0x3fc99999, 0x999999a6, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269ee6, 0x3fc99999, 0x999999a6, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fd31a9b, 0x43436de6, 0x3fc99999, 0x999999a6, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fd1cfa9, 0x5f7a8dd3, 0x3fc99999, 0x999999a6, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fd0adb5, 0xa7741c08, 0x3fc99999, 0x999999a6, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fcf5b75, 0xf92c80e5, 0x3fc99999, 0x999999a6, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fcd9461, 0x05023393, 0x3fc99999, 0x999999a6, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fcbfd58, 0x1196f5c9, 0x3fc99999, 0x999999a6, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fca8f3c, 0x814a92de, 0x3fc99999, 0x999999a6, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40072c43, 0xf4b1650a, 0x3fd00000, 0x00000006, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x400712fb, 0x97e1e342, 0x3fd00000, 0x00000006, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4006f715, 0x259aea13, 0x3fd00000, 0x00000006, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4006d825, 0xfdaafada, 0x3fd00000, 0x00000006, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4006b5ac, 0x6d632f9e, 0x3fd00000, 0x00000006, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fd00000, 0x00000006, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40066377, 0xfe555c40, 0x3fd00000, 0x00000006, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40063202, 0x7e829b4b, 0x3fd00000, 0x00000006, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4005f973, 0x15254855, 0x3fd00000, 0x00000006, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4005b83f, 0xa76fbdae, 0x3fd00000, 0x00000006, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ac, 0x3fd00000, 0x00000006, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40051371, 0xab22738a, 0x3fd00000, 0x00000006, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4004a9f8, 0x694c6d69, 0x3fd00000, 0x00000006, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x40042bb5, 0xf776eb7e, 0x3fd00000, 0x00000006, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40039328, 0x6347d273, 0x3fd00000, 0x00000006, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321cf, 0x3fd00000, 0x00000006, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x4001f6dc, 0x3e63112d, 0x3fd00000, 0x00000006, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x4000e3c5, 0x1fa059c1, 0x3fd00000, 0x00000006, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3fff3889, 0x2f1e0c82, 0x3fd00000, 0x00000006, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffc4a83, 0x936311d4, 0x3fd00000, 0x00000006, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d13, 0x3fd00000, 0x00000006, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff5f973, 0x15254852, 0x3fd00000, 0x00000006, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff30b6d, 0x796a4da5, 0x3fd00000, 0x00000006, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a6, 0x3fd00000, 0x00000006, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fecac7c, 0x57846f9d, 0x3fd00000, 0x00000006, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd00000, 0x00000006, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8c, 0x3fd00000, 0x00000006, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe3d915, 0x73350663, 0x3fd00000, 0x00000006, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fe1e00b, 0xabdefeb6, 0x3fd00000, 0x00000006, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe03a26, 0xa486e634, 0x3fd00000, 0x00000006, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb54, 0x3fd00000, 0x00000006, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fdb4ddd, 0x66a37b45, 0x3fd00000, 0x00000006, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fd94441, 0xf8f7260f, 0x3fd00000, 0x00000006, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fd77fc6, 0xae0c8e66, 0x3fd00000, 0x00000006, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fd5f41a, 0xaf7686c0, 0x3fd00000, 0x00000006, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269ee4, 0x3fd00000, 0x00000006, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fd36277, 0x3707ebcf, 0x3fd00000, 0x00000006, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fd24eaa, 0xb4c991f1, 0x3fd00000, 0x00000006, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fd15731, 0x754a1824, 0x3fd00000, 0x00000006, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fd077fd, 0xe3124ead, 0x3fd00000, 0x00000006, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4006cd14, 0x07805737, 0x3fd33333, 0x33333339, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4006af8a, 0xb51a6804, 0x3fd33333, 0x33333339, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fd33333, 0x33333339, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40066b1c, 0x486d5729, 0x3fd33333, 0x33333339, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40064338, 0x2c079139, 0x3fd33333, 0x33333339, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x400616b4, 0x66d73d5f, 0x3fd33333, 0x33333339, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4005e4c3, 0x6ca01189, 0x3fd33333, 0x33333339, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4005ac69, 0x1f0f4899, 0x3fd33333, 0x33333339, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ad, 0x3fd33333, 0x33333339, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40052351, 0xd5cc540e, 0x3fd33333, 0x33333339, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4004cf33, 0xdec5e9de, 0x3fd33333, 0x33333339, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec29431, 0x3fd33333, 0x33333339, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4003fc17, 0x6b7a855e, 0x3fd33333, 0x33333339, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x400376b7, 0x14052d9e, 0x3fd33333, 0x33333339, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd33333, 0x33333339, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x40021fd0, 0x9b1e712c, 0x3fd33333, 0x33333339, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af6f, 0x3fd33333, 0x33333339, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fd33333, 0x33333339, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4cb, 0x3fd33333, 0x33333339, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffbc66e, 0x44cbc06f, 0x3fd33333, 0x33333339, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d13, 0x3fd33333, 0x33333339, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff67d88, 0x63bc99b9, 0x3fd33333, 0x33333339, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855d, 0x3fd33333, 0x33333339, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe42, 0x3fd33333, 0x33333339, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f699, 0x3fd33333, 0x33333339, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fec08aa, 0xe496efa5, 0x3fd33333, 0x33333339, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd33333, 0x33333339, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe6ad11, 0x00fbfde0, 0x3fd33333, 0x33333339, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fe4978f, 0xa3269ee2, 0x3fd33333, 0x33333339, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd6066397, 0x3fd33333, 0x33333339, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce2, 0x3fd33333, 0x33333339, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fdff54b, 0xf3bec845, 0x3fd33333, 0x33333339, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb53, 0x3fd33333, 0x33333339, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fdbac91, 0xa9a723ef, 0x3fd33333, 0x33333339, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fd9e9bf, 0x3d20dc73, 0x3fd33333, 0x33333339, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fd85a37, 0x6b677dc2, 0x3fd33333, 0x33333339, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fd6f619, 0x41e4def2, 0x3fd33333, 0x33333339, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fd5b6f8, 0x5eb6af76, 0x3fd33333, 0x33333339, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fd4978f, 0xa3269ee3, 0x3fd33333, 0x33333339, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fd39384, 0xf94e28a1, 0x3fd33333, 0x33333339, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40067078, 0xc2eef45d, 0x3fd66666, 0x6666666c, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40064f0e, 0xb468064f, 0x3fd66666, 0x6666666c, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40062a65, 0x7a259a4d, 0x3fd66666, 0x6666666c, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40060204, 0xbe520693, 0x3fd66666, 0x6666666c, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4005d55d, 0x7bcaa898, 0x3fd66666, 0x6666666c, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4005a3c4, 0xf2e49eb4, 0x3fd66666, 0x6666666c, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ad, 0x3fd66666, 0x6666666c, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40052e63, 0xcbf6f7b2, 0x3fd66666, 0x6666666c, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4004e87c, 0x3b956ba6, 0x3fd66666, 0x6666666c, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40049952, 0x004c912d, 0x3fd66666, 0x6666666c, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40043f37, 0x08e537eb, 0x3fd66666, 0x6666666c, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4003d82a, 0x5408834c, 0x3fd66666, 0x6666666c, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x400361d1, 0x62e61b89, 0x3fd66666, 0x6666666c, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd66666, 0x6666666c, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40023c41, 0xea611602, 0x3fd66666, 0x6666666c, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x40018743, 0x06ef5822, 0x3fd66666, 0x6666666c, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x4000b833, 0xbe165cc7, 0x3fd66666, 0x6666666c, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3fff9c6b, 0x238c6430, 0x3fd66666, 0x6666666c, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffd95e5, 0xac22d087, 0x3fd66666, 0x6666666c, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffb6731, 0x2cd2f430, 0x3fd66666, 0x6666666c, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d14, 0x3fd66666, 0x6666666c, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff6dcc5, 0x7bb565f9, 0x3fd66666, 0x6666666c, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff4ae10, 0xfc6589a2, 0x3fd66666, 0x6666666c, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff2a78b, 0x84fbf5fa, 0x3fd66666, 0x6666666c, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff0d38f, 0x2c5ba09d, 0x3fd66666, 0x6666666c, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3fee6ae1, 0x355353ce, 0x3fd66666, 0x6666666c, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3feb96e5, 0xa78c5c51, 0x3fd66666, 0x6666666c, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd66666, 0x6666666c, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fe700a7, 0xc5784634, 0x3fd66666, 0x6666666c, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe52744, 0x00eea72c, 0x3fd66666, 0x6666666c, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fe38b11, 0x2d7bd4af, 0x3fd66666, 0x6666666c, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe222a5, 0x4fde6fa9, 0x3fd66666, 0x6666666c, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe0e5fc, 0x62bb05c4, 0x3fd66666, 0x6666666c, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fdf9cbc, 0x4269ab2c, 0x3fd66666, 0x6666666c, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb51, 0x3fd66666, 0x6666666c, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fdbf1b3, 0x0afc731c, 0x3fd66666, 0x6666666c, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fda64ee, 0xc3cc23fe, 0x3fd66666, 0x6666666c, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fd8ffb4, 0xaf913426, 0x3fd66666, 0x6666666c, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fd7bcae, 0xd0f49656, 0x3fd66666, 0x6666666c, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fd69764, 0xfee13644, 0x3fd66666, 0x6666666c, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x400616b4, 0x66d73d60, 0x3fd99999, 0x9999999f, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4005f1ce, 0xcb0d4d6d, 0x3fd99999, 0x9999999f, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4005c975, 0x54f4b39e, 0x3fd99999, 0x9999999f, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40059d2f, 0x241f85a6, 0x3fd99999, 0x9999999f, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fd99999, 0x9999999f, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4005368c, 0x951e9cfc, 0x3fd99999, 0x9999999f, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4004fac5, 0x404fe6da, 0x3fd99999, 0x9999999f, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4004b831, 0x3ddf1776, 0x3fd99999, 0x9999999f, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fd99999, 0x9999999f, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40041a34, 0xfb542bff, 0x3fd99999, 0x9999999f, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4003bc1c, 0xc0033272, 0x3fd99999, 0x9999999f, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x400351d1, 0x783b3dac, 0x3fd99999, 0x9999999f, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd99999, 0x9999999f, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x40025127, 0x9b802817, 0x3fd99999, 0x9999999f, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4001b6e1, 0x92ebbe42, 0x3fd99999, 0x9999999f, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x40010900, 0x9519d637, 0x3fd99999, 0x9999999f, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fd99999, 0x9999999f, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffedf81, 0xa4bd64d1, 0x3fd99999, 0x9999999f, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd30, 0x3fd99999, 0x9999999f, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffb1f56, 0xfdeef00c, 0x3fd99999, 0x9999999f, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fd99999, 0x9999999f, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff7249f, 0xaa996a1e, 0x3fd99999, 0x9999999f, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff5368c, 0x951e9cfa, 0x3fd99999, 0x9999999f, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff36475, 0x03caf55a, 0x3fd99999, 0x9999999f, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe43, 0x3fd99999, 0x9999999f, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff031f5, 0x7e54adbd, 0x3fd99999, 0x9999999f, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fedac67, 0x0561bb4e, 0x3fd99999, 0x9999999f, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3feb434e, 0xe31013fc, 0x3fd99999, 0x9999999f, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd99999, 0x9999999f, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe740a7, 0x7023bda9, 0x3fd99999, 0x9999999f, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fe5977a, 0x5103ea93, 0x3fd99999, 0x9999999f, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe41f19, 0x63c0045f, 0x3fd99999, 0x9999999f, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd6066396, 0x3fd99999, 0x9999999f, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe1a728, 0x59945683, 0x3fd99999, 0x9999999f, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe09cd8, 0x4fd118f3, 0x3fd99999, 0x9999999f, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fdf5b75, 0xf92c80dd, 0x3fd99999, 0x9999999f, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb4f, 0x3fd99999, 0x9999999f, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fdc2661, 0x81253b88, 0x3fd99999, 0x9999999f, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fdac42f, 0xfa7bcbce, 0x3fd99999, 0x9999999f, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fd98164, 0x49b6fd53, 0x3fd99999, 0x9999999f, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4005bffa, 0x17065de0, 0x3fdccccc, 0xccccccd2, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x400597ff, 0xd521f2a9, 0x3fdccccc, 0xccccccd2, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fdccccc, 0xccccccd2, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40053ccf, 0xe79b8f8e, 0x3fdccccc, 0xccccccd2, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4005089b, 0xaf0d60e4, 0x3fdccccc, 0xccccccd2, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4004cf33, 0xdec5e9df, 0x3fdccccc, 0xccccccd2, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40048fe1, 0xf1cd429f, 0x3fdccccc, 0xccccccd2, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x400449d3, 0x87509220, 0x3fdccccc, 0xccccccd2, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fdccccc, 0xccccccd2, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4003a59b, 0x934a3833, 0x3fdccccc, 0xccccccd2, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4003452d, 0x2a42ac27, 0x3fdccccc, 0xccccccd2, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fdccccc, 0xccccccd2, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40026127, 0x862b05f4, 0x3fdccccc, 0xccccccd2, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4001dace, 0xaa5dc055, 0x3fdccccc, 0xccccccd2, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fdccccc, 0xccccccd2, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x40009f87, 0x5343d016, 0x3fdccccc, 0xccccccd2, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3fffd307, 0x52e32009, 0x3fdccccc, 0xccccccd2, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4cd, 0x3fdccccc, 0xccccccd2, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffca1a6, 0x56770bcd, 0x3fdccccc, 0xccccccd2, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffae73b, 0xd5e44e58, 0x3fdccccc, 0xccccccd2, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fdccccc, 0xccccccd2, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff75cba, 0xd2a40bd2, 0x3fdccccc, 0xccccccd2, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff5a250, 0x52114e5e, 0x3fdccccc, 0xccccccd2, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855e, 0x3fdccccc, 0xccccccd2, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff270ef, 0x55a53a23, 0x3fdccccc, 0xccccccd2, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff104e8, 0x0200b9fe, 0x3fdccccc, 0xccccccd2, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f699, 0x3fdccccc, 0xccccccd2, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3fed1cb2, 0xa799b305, 0x3fdccccc, 0xccccccd2, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3feb034f, 0x38649c87, 0x3fdccccc, 0xccccccd2, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fdccccc, 0xccccccd2, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fe77338, 0xa80603be, 0x3fdccccc, 0xccccccd2, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe5f17f, 0x03e7d38e, 0x3fdccccc, 0xccccccd2, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe4978f, 0xa3269ee1, 0x3fdccccc, 0xccccccd2, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe3609f, 0x33ce6bdf, 0x3fdccccc, 0xccccccd2, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe24865, 0x89dba9df, 0x3fdccccc, 0xccccccd2, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce1, 0x3fdccccc, 0xccccccd2, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe0657e, 0x94db30cf, 0x3fdccccc, 0xccccccd2, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fdf295b, 0x6544ec4e, 0x3fdccccc, 0xccccccd2, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fddac67, 0x0561bb4f, 0x3fdccccc, 0xccccccd2, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fdc4fdb, 0xf911d373, 0x3fdccccc, 0xccccccd2, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fe00000, 0x00000003, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x400541c5, 0x5d5d64c0, 0x3fe00000, 0x00000003, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40051371, 0xab22738b, 0x3fe00000, 0x00000003, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4004e102, 0xc80931db, 0x3fe00000, 0x00000003, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4004a9f8, 0x694c6d6a, 0x3fe00000, 0x00000003, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fe00000, 0x00000003, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40042bb5, 0xf776eb7f, 0x3fe00000, 0x00000003, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4003e31d, 0xfb0d799c, 0x3fe00000, 0x00000003, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40039328, 0x6347d274, 0x3fe00000, 0x00000003, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40033aef, 0xbf36777e, 0x3fe00000, 0x00000003, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fe00000, 0x00000003, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40026dcb, 0xd423977a, 0x3fe00000, 0x00000003, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4001f6dc, 0x3e63112f, 0x3fe00000, 0x00000003, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x400173c1, 0xf5810bb6, 0x3fe00000, 0x00000003, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4000e3c5, 0x1fa059c3, 0x3fe00000, 0x00000003, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe00000, 0x00000003, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3fff3889, 0x2f1e0c85, 0x3fe00000, 0x00000003, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffdcbc9, 0xedcbd8d7, 0x3fe00000, 0x00000003, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffc4a83, 0x936311d7, 0x3fe00000, 0x00000003, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffaba39, 0x7c7259da, 0x3fe00000, 0x00000003, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fe00000, 0x00000003, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff789bd, 0x2c160051, 0x3fe00000, 0x00000003, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff5f973, 0x15254855, 0x3fe00000, 0x00000003, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff4782c, 0xbabc8155, 0x3fe00000, 0x00000003, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff30b6d, 0x796a4da7, 0x3fe00000, 0x00000003, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe43, 0x3fe00000, 0x00000003, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a7, 0x3fe00000, 0x00000003, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3feeb8e5, 0x7b0c8582, 0x3fe00000, 0x00000003, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fecac7c, 0x57846f9e, 0x3fe00000, 0x00000003, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fead0be, 0x00825672, 0x3fe00000, 0x00000003, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe00000, 0x00000003, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe79c2e, 0x5436d664, 0x3fe00000, 0x00000003, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8a, 0x3fe00000, 0x00000003, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe4fb75, 0x64dacded, 0x3fe00000, 0x00000003, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe3d915, 0x73350660, 0x3fe00000, 0x00000003, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd6066395, 0x3fe00000, 0x00000003, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe1e00b, 0xabdefeb4, 0x3fe00000, 0x00000003, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe103e2, 0x30ebecf2, 0x3fe00000, 0x00000003, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe03a26, 0xa486e631, 0x3fe00000, 0x00000003, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fdf01af, 0xb73642bd, 0x3fe00000, 0x00000003, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40051c28, 0xaaf491df, 0x3fe19999, 0x9999999d, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4004ef33, 0x3421a552, 0x3fe19999, 0x9999999d, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4004be8d, 0x75c60da2, 0x3fe19999, 0x9999999d, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x400489ce, 0x32c7e50c, 0x3fe19999, 0x9999999d, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4004507f, 0x4d109f28, 0x3fe19999, 0x9999999d, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4004121c, 0xb53cd826, 0x3fe19999, 0x9999999d, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4003ce13, 0xa64eb185, 0x3fe19999, 0x9999999d, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x400383c2, 0x72726983, 0x3fe19999, 0x9999999d, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40033279, 0x47a8a3f3, 0x3fe19999, 0x9999999d, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe19999, 0x9999999d, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40027809, 0x3f2fcc24, 0x3fe19999, 0x9999999d, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40020d5d, 0x6b1c0b6e, 0x3fe19999, 0x9999999d, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x400198c4, 0x031217a2, 0x3fe19999, 0x9999999d, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x400119a6, 0xfe19b274, 0x3fe19999, 0x9999999d, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x40008fa7, 0x2899ef93, 0x3fe19999, 0x9999999d, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffff572, 0xaded0be5, 0x3fe19999, 0x9999999d, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffeb68c, 0x3ba726db, 0x3fe19999, 0x9999999d, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffd648c, 0xd67db728, 0x3fe19999, 0x9999999d, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffc02a9, 0x647f0db2, 0x3fe19999, 0x9999999d, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa9553, 0x1c6d8e5d, 0x3fe19999, 0x9999999d, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe19999, 0x9999999d, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff7aea3, 0x8c1acbcf, 0x3fe19999, 0x9999999d, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff6414d, 0x44094c7a, 0x3fe19999, 0x9999999d, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff4df69, 0xd20aa304, 0x3fe19999, 0x9999999d, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff38d6a, 0x6ce13351, 0x3fe19999, 0x9999999d, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff24e83, 0xfa9b4e47, 0x3fe19999, 0x9999999d, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff124a8, 0x57547b07, 0x3fe19999, 0x9999999d, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff010a8, 0xac54f544, 0x3fe19999, 0x9999999d, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fee24dd, 0x44c855d1, 0x3fe19999, 0x9999999d, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fec5277, 0xa4a086a2, 0x3fe19999, 0x9999999d, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3feaa7c8, 0x545183cd, 0x3fe19999, 0x9999999d, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe19999, 0x9999999d, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe7be08, 0x326e248f, 0x3fe19999, 0x9999999d, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe678e3, 0x87470e50, 0x3fe19999, 0x9999999d, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe54f9e, 0xb7d5ee49, 0x3fe19999, 0x9999999d, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe43f7a, 0x7c1d53c7, 0x3fe19999, 0x9999999d, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe345f0, 0x1cce37bb, 0x3fe19999, 0x9999999d, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe260b4, 0x85f1202d, 0x3fe19999, 0x9999999d, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe18db7, 0x79f87dd4, 0x3fe19999, 0x9999999d, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe0cb20, 0x808a1f16, 0x3fe19999, 0x9999999d, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4004cf33, 0xdec5e9df, 0x3fe33333, 0x33333337, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4004a04f, 0x5f80df4b, 0x3fe33333, 0x33333337, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fe33333, 0x33333337, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40043726, 0xeb5fa0c2, 0x3fe33333, 0x33333337, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fe33333, 0x33333337, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4003bc1c, 0xc0033272, 0x3fe33333, 0x33333337, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x400376b7, 0x14052d9f, 0x3fe33333, 0x33333337, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40032b5c, 0xd7c0fc06, 0x3fe33333, 0x33333337, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe33333, 0x33333337, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4002807f, 0xb6bd9fae, 0x3fe33333, 0x33333337, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40021fd0, 0x9b1e712d, 0x3fe33333, 0x33333337, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4001b6e1, 0x92ebbe43, 0x3fe33333, 0x33333337, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fe33333, 0x33333337, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4000ca7c, 0xc2d0d7fc, 0x3fe33333, 0x33333337, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe33333, 0x33333337, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3fff730b, 0xd281f698, 0x3fe33333, 0x33333337, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3fe33333, 0x33333337, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd31, 0x3fe33333, 0x33333337, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffbc66e, 0x44cbc072, 0x3fe33333, 0x33333337, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa7687, 0x3ac2bc7a, 0x3fe33333, 0x33333337, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe33333, 0x33333337, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff7cd6f, 0x6dc59db2, 0x3fe33333, 0x33333337, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff67d88, 0x63bc99bb, 0x3fe33333, 0x33333337, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff5368c, 0x951e9cfb, 0x3fe33333, 0x33333337, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855f, 0x3fe33333, 0x33333337, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff2d0ea, 0xd6066394, 0x3fe33333, 0x33333337, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe33333, 0x33333337, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff0aefd, 0x22e6aa36, 0x3fe33333, 0x33333337, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3fe33333, 0x33333337, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fedac67, 0x0561bb50, 0x3fe33333, 0x33333337, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fec08aa, 0xe496efa6, 0x3fe33333, 0x33333337, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fea85ee, 0x761a35a1, 0x3fe33333, 0x33333337, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe33333, 0x33333337, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe7da79, 0xf20cc443, 0x3fe33333, 0x33333337, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe6ad11, 0x00fbfddf, 0x3fe33333, 0x33333337, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe5977a, 0x5103ea92, 0x3fe33333, 0x33333337, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe4978f, 0xa3269ee1, 0x3fe33333, 0x33333337, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe3ab51, 0xa3923153, 0x3fe33333, 0x33333337, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe2d0ea, 0xd6066395, 0x3fe33333, 0x33333337, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe206af, 0xd30d3731, 0x3fe33333, 0x33333337, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40048590, 0xb7aedd62, 0x3fe4cccc, 0xccccccd1, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40045514, 0x33f00782, 0x3fe4cccc, 0xccccccd1, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x400420fd, 0x07447552, 0x3fe4cccc, 0xccccccd1, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4003e8f3, 0xacb51f92, 0x3fe4cccc, 0xccccccd1, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4003ac98, 0xf27e8651, 0x3fe4cccc, 0xccccccd1, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40036b86, 0x251cd70d, 0x3fe4cccc, 0xccccccd1, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4003254d, 0xb30ae9d3, 0x3fe4cccc, 0xccccccd1, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe4cccc, 0xccccccd1, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4002879c, 0x26a5479b, 0x3fe4cccc, 0xccccccd1, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40022f36, 0x8bf3da1f, 0x3fe4cccc, 0xccccccd1, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4001cfdb, 0x0358ca06, 0x3fe4cccc, 0xccccccd1, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40016925, 0x7715b182, 0x3fe4cccc, 0xccccccd1, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4000fac7, 0xc0872c2c, 0x3fe4cccc, 0xccccccd1, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x40008495, 0x326f4bf0, 0x3fe4cccc, 0xccccccd1, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x4000068f, 0xdf56fb08, 0x3fe4cccc, 0xccccccd1, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3fff01ec, 0xffc750ae, 0x3fe4cccc, 0xccccccd1, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffde8a2, 0x2515088e, 0x3fe4cccc, 0xccccccd1, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffcc2f3, 0x2876c448, 0x3fe4cccc, 0xccccccd1, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffb933b, 0xc05799bf, 0x3fe4cccc, 0xccccccd1, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa5c70, 0x7de844b3, 0x3fe4cccc, 0xccccccd1, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe4cccc, 0xccccccd1, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff7e786, 0x2aa0157a, 0x3fe4cccc, 0xccccccd1, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff6b0ba, 0xe830c06e, 0x3fe4cccc, 0xccccccd1, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff58103, 0x801195e5, 0x3fe4cccc, 0xccccccd1, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff45b54, 0x8373519f, 0x3fe4cccc, 0xccccccd1, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff34209, 0xa8c1097f, 0x3fe4cccc, 0xccccccd1, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff236d6, 0xe9da641d, 0x3fe4cccc, 0xccccccd1, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff13acc, 0x43a9c24d, 0x3fe4cccc, 0xccccccd1, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff04e67, 0x277a01d7, 0x3fe4cccc, 0xccccccd1, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3feee357, 0x74b9ee52, 0x3fe4cccc, 0xccccccd1, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fed4881, 0x43ad8c44, 0x3fe4cccc, 0xccccccd1, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3febcb13, 0x21414be0, 0x3fe4cccc, 0xccccccd1, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fea697c, 0xb67b95ed, 0x3fe4cccc, 0xccccccd1, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe4cccc, 0xccccccd1, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe7f2b6, 0x84e50d11, 0x3fe4cccc, 0xccccccd1, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe6d9d4, 0xbc9d5828, 0x3fe4cccc, 0xccccccd1, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe5d589, 0x87169b18, 0x3fe4cccc, 0xccccccd1, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe4e41e, 0x9e3c3615, 0x3fe4cccc, 0xccccccd1, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe403f9, 0x33fedf17, 0x3fe4cccc, 0xccccccd1, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe3339c, 0x81509658, 0x3fe4cccc, 0xccccccd1, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40043f37, 0x08e537ec, 0x3fe66666, 0x6666666b, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40040d72, 0x6e9f7ad4, 0x3fe66666, 0x6666666b, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4003d82a, 0x5408834d, 0x3fe66666, 0x6666666b, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40039f10, 0x8a1dc76f, 0x3fe66666, 0x6666666b, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x400361d1, 0x62e61b8a, 0x3fe66666, 0x6666666b, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40032014, 0x3b9f415f, 0x3fe66666, 0x6666666b, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe66666, 0x6666666b, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40028dab, 0x4b5b59cf, 0x3fe66666, 0x6666666b, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40023c41, 0xea611602, 0x3fe66666, 0x6666666b, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4001e4e5, 0x5817921d, 0x3fe66666, 0x6666666b, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40018743, 0x06ef5823, 0x3fe66666, 0x6666666b, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40012317, 0x0c990102, 0x3fe66666, 0x6666666b, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4000b833, 0xbe165cc8, 0x3fe66666, 0x6666666b, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe66666, 0x6666666b, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3fff9c6b, 0x238c6432, 0x3fe66666, 0x6666666b, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffe9f02, 0x0021cec5, 0x3fe66666, 0x6666666b, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffd95e5, 0xac22d08a, 0x3fe66666, 0x6666666b, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffc829e, 0xbb6db38b, 0x3fe66666, 0x6666666b, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffb6731, 0x2cd2f432, 0x3fe66666, 0x6666666b, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa460e, 0xa017978f, 0x3fe66666, 0x6666666b, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe66666, 0x6666666b, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff7fde8, 0x0870c29e, 0x3fe66666, 0x6666666b, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff6dcc5, 0x7bb565fb, 0x3fe66666, 0x6666666b, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff5c157, 0xed1aa6a2, 0x3fe66666, 0x6666666b, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff4ae10, 0xfc6589a3, 0x3fe66666, 0x6666666b, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff3a4f4, 0xa8668b68, 0x3fe66666, 0x6666666b, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff2a78b, 0x84fbf5fc, 0x3fe66666, 0x6666666b, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe66666, 0x6666666b, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff0d38f, 0x2c5ba09f, 0x3fe66666, 0x6666666b, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3feffb91, 0x1eacb051, 0x3fe66666, 0x6666666b, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fee6ae1, 0x355353d0, 0x3fe66666, 0x6666666b, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fecf457, 0xf0b26be7, 0x3fe66666, 0x6666666b, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3feb96e5, 0xa78c5c52, 0x3fe66666, 0x6666666b, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fea5140, 0x23a34d20, 0x3fe66666, 0x6666666b, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe66666, 0x6666666b, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe8079c, 0x6293aee0, 0x3fe66666, 0x6666666b, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe700a7, 0xc5784634, 0x3fe66666, 0x6666666b, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe60bab, 0x289996a1, 0x3fe66666, 0x6666666b, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe52744, 0x00eea72b, 0x3fe66666, 0x6666666b, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe45223, 0x9692c90f, 0x3fe66666, 0x6666666b, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fe80000, 0x00000005, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4003c953, 0x34d30df4, 0x3fe80000, 0x00000005, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x40039328, 0x6347d275, 0x3fe80000, 0x00000005, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40035951, 0xee0fd5c9, 0x3fe80000, 0x00000005, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40031b87, 0x267eca84, 0x3fe80000, 0x00000005, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe80000, 0x00000005, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x400292e4, 0xc2c70243, 0x3fe80000, 0x00000005, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40024772, 0xd9496c95, 0x3fe80000, 0x00000005, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4001f6dc, 0x3e63112f, 0x3fe80000, 0x00000005, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4001a0dc, 0x49296b7c, 0x3fe80000, 0x00000005, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fe80000, 0x00000005, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4000e3c5, 0x1fa059c3, 0x3fe80000, 0x00000005, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x40007c6c, 0x6947a6a6, 0x3fe80000, 0x00000005, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x40000f34, 0x0b81a4ee, 0x3fe80000, 0x00000005, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3fff3889, 0x2f1e0c86, 0x3fe80000, 0x00000005, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3fe80000, 0x00000005, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffd4d68, 0xbe213417, 0x3fe80000, 0x00000005, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffc4a83, 0x936311d8, 0x3fe80000, 0x00000005, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffb40e9, 0xaf482898, 0x3fe80000, 0x00000005, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa32a5, 0x1baa2089, 0x3fe80000, 0x00000005, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe80000, 0x00000005, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff81151, 0x8cde39a4, 0x3fe80000, 0x00000005, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff7030c, 0xf9403195, 0x3fe80000, 0x00000005, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff5f973, 0x15254856, 0x3fe80000, 0x00000005, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff4f68d, 0xea672616, 0x3fe80000, 0x00000005, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855f, 0x3fe80000, 0x00000005, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff30b6d, 0x796a4da8, 0x3fe80000, 0x00000005, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff2258e, 0x91851051, 0x3fe80000, 0x00000005, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff14b1d, 0xd5f90ce1, 0x3fe80000, 0x00000005, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a8, 0x3fe80000, 0x00000005, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3fe80000, 0x00000005, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fee047c, 0x2c6b066a, 0x3fe80000, 0x00000005, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fecac7c, 0x57846f9e, 0x3fe80000, 0x00000005, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3feb6a21, 0xebeb0209, 0x3fe80000, 0x00000005, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fea3c5a, 0x45f4ab51, 0x3fe80000, 0x00000005, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe80000, 0x00000005, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe819d0, 0xb7158a4d, 0x3fe80000, 0x00000005, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe722a5, 0x98d15d3a, 0x3fe80000, 0x00000005, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8a, 0x3fe80000, 0x00000005, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe562a0, 0x7dc47c8f, 0x3fe80000, 0x00000005, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4003bc1c, 0xc0033273, 0x3fe99999, 0x9999999f, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40038899, 0xe572fe85, 0x3fe99999, 0x9999999f, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x400351d1, 0x783b3dad, 0x3fe99999, 0x9999999f, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40031787, 0x26d41fcc, 0x3fe99999, 0x9999999f, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe99999, 0x9999999f, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40029771, 0xd7e7791e, 0x3fe99999, 0x9999999f, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x40025127, 0x9b802818, 0x3fe99999, 0x9999999f, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40020660, 0x0be7bd51, 0x3fe99999, 0x9999999f, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x4001b6e1, 0x92ebbe43, 0x3fe99999, 0x9999999f, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x40016279, 0xb155a47a, 0x3fe99999, 0x9999999f, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40010900, 0x9519d638, 0x3fe99999, 0x9999999f, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4000aa5d, 0x4f58e2bf, 0x3fe99999, 0x9999999f, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe99999, 0x9999999f, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x3fffbb37, 0x05373615, 0x3fe99999, 0x9999999f, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3ffedf81, 0xa4bd64d2, 0x3fe99999, 0x9999999f, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffdfa99, 0x22062809, 0x3fe99999, 0x9999999f, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd32, 0x3fe99999, 0x9999999f, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffc192a, 0xbdbdf877, 0x3fe99999, 0x9999999f, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffb1f56, 0xfdeef00d, 0x3fe99999, 0x9999999f, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa21a6, 0x31fd9506, 0x3fe99999, 0x9999999f, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe99999, 0x9999999f, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff82250, 0x768ac527, 0x3fe99999, 0x9999999f, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff7249f, 0xaa996a20, 0x3fe99999, 0x9999999f, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff62acb, 0xeaca61b7, 0x3fe99999, 0x9999999f, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff5368c, 0x951e9cfc, 0x3fe99999, 0x9999999f, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff4495d, 0x86823225, 0x3fe99999, 0x9999999f, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff36475, 0x03caf55c, 0x3fe99999, 0x9999999f, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff288bf, 0xa3512419, 0x3fe99999, 0x9999999f, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe99999, 0x9999999f, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3ff0ef3c, 0x09d694b1, 0x3fe99999, 0x9999999f, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3ff031f5, 0x7e54adbe, 0x3fe99999, 0x9999999f, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3feefe06, 0x8bba2275, 0x3fe99999, 0x9999999f, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fedac67, 0x0561bb50, 0x3fe99999, 0x9999999f, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fec6e6d, 0x2171bf19, 0x3fe99999, 0x9999999f, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3feb434e, 0xe31013fc, 0x3fe99999, 0x9999999f, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fea2a25, 0xf172cfe4, 0x3fe99999, 0x9999999f, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe99999, 0x9999999f, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe829d0, 0xb5c0352b, 0x3fe99999, 0x9999999f, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe740a7, 0x7023bda9, 0x3fe99999, 0x9999999f, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe66585, 0xbb44ba4a, 0x3fe99999, 0x9999999f, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40037f2d, 0x8b93012a, 0x3feb3333, 0x33333339, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x40034b25, 0xb27b30a4, 0x3feb3333, 0x33333339, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x400313fc, 0x14754e12, 0x3feb3333, 0x33333339, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3feb3333, 0x33333339, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40029b71, 0xd79223d6, 0x3feb3333, 0x33333339, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x400259a7, 0x10566dd9, 0x3feb3333, 0x33333339, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x400213e8, 0x74487c33, 0x3feb3333, 0x33333339, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x4001ca05, 0x51b12410, 0x3feb3333, 0x33333339, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40017bd2, 0x1306a2e0, 0x3feb3333, 0x33333339, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4001292a, 0xcb9e5e96, 0x3feb3333, 0x33333339, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x4000d1f6, 0x365d11c8, 0x3feb3333, 0x33333339, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40007629, 0x16cab415, 0x3feb3333, 0x33333339, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x400015c9, 0xda46bdfc, 0x3feb3333, 0x33333339, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x3fff61e8, 0x80287a1f, 0x3feb3333, 0x33333339, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3ffe8fb9, 0x6bf1d8f3, 0x3feb3333, 0x33333339, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffdb5a6, 0x01769192, 0x3feb3333, 0x33333339, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffcd487, 0x74e47388, 0x3feb3333, 0x33333339, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffbed70, 0x67a8594c, 0x3feb3333, 0x33333339, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffb01a8, 0xbf84055b, 0x3feb3333, 0x33333339, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa12a5, 0x465464cf, 0x3feb3333, 0x33333339, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3feb3333, 0x33333339, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff83151, 0x6233f55f, 0x3feb3333, 0x33333339, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff7424d, 0xe90454d2, 0x3feb3333, 0x33333339, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff65686, 0x40e000e2, 0x3feb3333, 0x33333339, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff56f6f, 0x33a3e6a6, 0x3feb3333, 0x33333339, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff48e50, 0xa711c89c, 0x3feb3333, 0x33333339, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff3b43d, 0x3c96813b, 0x3feb3333, 0x33333339, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff2e20e, 0x285fe00f, 0x3feb3333, 0x33333339, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff21862, 0xf3fade36, 0x3feb3333, 0x33333339, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3ff157a4, 0x7af2f204, 0x3feb3333, 0x33333339, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3ff0a00a, 0x3bce369f, 0x3feb3333, 0x33333339, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3fefe342, 0x22973a03, 0x3feb3333, 0x33333339, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fee98a5, 0x04f628dd, 0x3feb3333, 0x33333339, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fed5fd8, 0x0a4c241b, 0x3feb3333, 0x33333339, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fec384b, 0x7feec390, 0x3feb3333, 0x33333339, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3feb2151, 0x0fb6fcf7, 0x3feb3333, 0x33333339, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3fea1a25, 0xf2c82506, 0x3feb3333, 0x33333339, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3feb3333, 0x33333339, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe837fc, 0xff3b7c14, 0x3feb3333, 0x33333339, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe75b56, 0x8723f1cd, 0x3feb3333, 0x33333339, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x4003452d, 0x2a42ac28, 0x3feccccc, 0xccccccd3, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x400310d2, 0xfe7fcad8, 0x3feccccc, 0xccccccd3, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3feccccc, 0xccccccd3, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x40029efc, 0xe9f0f590, 0x3feccccc, 0xccccccd3, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40026127, 0x862b05f5, 0x3feccccc, 0xccccccd3, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x40021fd0, 0x9b1e712e, 0x3feccccc, 0xccccccd3, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4001dace, 0xaa5dc056, 0x3feccccc, 0xccccccd3, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x400191fb, 0xf721ce50, 0x3feccccc, 0xccccccd3, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3feccccc, 0xccccccd3, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4000f46b, 0x88a03600, 0x3feccccc, 0xccccccd3, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40009f87, 0x5343d017, 0x3feccccc, 0xccccccd3, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x4000468a, 0x8ace4df5, 0x3feccccc, 0xccccccd3, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x3fffd307, 0x52e32009, 0x3feccccc, 0xccccccd3, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x3fff1127, 0x088152ab, 0x3feccccc, 0xccccccd3, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3feccccc, 0xccccccd3, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffd77c7, 0xb196b31f, 0x3feccccc, 0xccccccd3, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffca1a6, 0x56770bcf, 0x3feccccc, 0xccccccd3, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffbc66e, 0x44cbc072, 0x3feccccc, 0xccccccd3, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffae73b, 0xd5e44e5a, 0x3feccccc, 0xccccccd3, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ffa054d, 0xbad44abd, 0x3feccccc, 0xccccccd3, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3feccccc, 0xccccccd3, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff83ea8, 0xedb40f71, 0x3feccccc, 0xccccccd3, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff75cba, 0xd2a40bd4, 0x3feccccc, 0xccccccd3, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff67d88, 0x63bc99bc, 0x3feccccc, 0xccccccd3, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff5a250, 0x52114e5f, 0x3feccccc, 0xccccccd3, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff4cc2e, 0xf6f1a70f, 0x3feccccc, 0xccccccd3, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff3fc17, 0x6b7a8560, 0x3feccccc, 0xccccccd3, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff332cf, 0xa0070783, 0x3feccccc, 0xccccccd3, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff270ef, 0x55a53a25, 0x3feccccc, 0xccccccd3, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe45, 0x3feccccc, 0xccccccd3, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3ff104e8, 0x0200ba00, 0x3feccccc, 0xccccccd3, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3ff05b1f, 0x9747ee2e, 0x3feccccc, 0xccccccd3, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3feccccc, 0xccccccd3, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fee3ffd, 0x74897b19, 0x3feccccc, 0xccccccd3, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fed1cb2, 0xa799b306, 0x3feccccc, 0xccccccd3, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fec08aa, 0xe496efa6, 0x3feccccc, 0xccccccd3, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3feb034f, 0x38649c88, 0x3feccccc, 0xccccccd3, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3fea0bf9, 0xa94cde1c, 0x3feccccc, 0xccccccd3, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3feccccc, 0xccccccd3, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe844a1, 0x571188fe, 0x3feccccc, 0xccccccd3, 0x3fee6666, 0x6666666d},
-{62,0,123,__LINE__, 0x40030dfc, 0xd57ce4cc, 0x3fee6666, 0x6666666d, 0xbff00000, 0x00000000},
-{62,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fee6666, 0x6666666d, 0xbfee6666, 0x66666666},
-{62,0,123,__LINE__, 0x4002a225, 0xffe678cb, 0x3fee6666, 0x6666666d, 0xbfeccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x400267d3, 0x4beb12fe, 0x3fee6666, 0x6666666d, 0xbfeb3333, 0x33333332},
-{62,0,123,__LINE__, 0x40022a5f, 0x18f3451e, 0x3fee6666, 0x6666666d, 0xbfe99999, 0x99999998},
-{62,0,123,__LINE__, 0x4001e9a5, 0xc99335af, 0x3fee6666, 0x6666666d, 0xbfe7ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4001a586, 0x8fc6c8cf, 0x3fee6666, 0x6666666d, 0xbfe66666, 0x66666664},
-{62,0,123,__LINE__, 0x40015de4, 0xca763c21, 0x3fee6666, 0x6666666d, 0xbfe4cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x400112a9, 0x9ee56458, 0x3fee6666, 0x6666666d, 0xbfe33333, 0x33333330},
-{62,0,123,__LINE__, 0x4000c3c5, 0xca449e50, 0x3fee6666, 0x6666666d, 0xbfe19999, 0x99999996},
-{62,0,123,__LINE__, 0x40007133, 0xa108dee2, 0x3fee6666, 0x6666666d, 0xbfdfffff, 0xfffffff9},
-{62,0,123,__LINE__, 0x40001af9, 0x294450fa, 0x3fee6666, 0x6666666d, 0xbfdccccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x3fff8254, 0x66b1ec6b, 0x3fee6666, 0x6666666d, 0xbfd99999, 0x99999993},
-{62,0,123,__LINE__, 0x3ffec7d4, 0x93fc7aa7, 0x3fee6666, 0x6666666d, 0xbfd66666, 0x66666660},
-{62,0,123,__LINE__, 0x3ffe06dc, 0x9297b73e, 0x3fee6666, 0x6666666d, 0xbfd33333, 0x3333332d},
-{62,0,123,__LINE__, 0x3ffd3ffa, 0xcd08c0c1, 0x3fee6666, 0x6666666d, 0xbfcfffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffc73e2, 0xe46d7f71, 0x3fee6666, 0x6666666d, 0xbfc99999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffba36c, 0x4c864173, 0x3fee6666, 0x6666666d, 0xbfc33333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffacf8e, 0xc523642f, 0x3fee6666, 0x6666666d, 0xbfb99999, 0x99999983},
-{62,0,123,__LINE__, 0x3ff9f95c, 0xaa6341c4, 0x3fee6666, 0x6666666d, 0xbfa99999, 0x9999996c},
-{62,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3fee6666, 0x6666666d, 0x3cb70000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff84a99, 0xfe25186a, 0x3fee6666, 0x6666666d, 0x3fa99999, 0x999999c8},
-{62,0,123,__LINE__, 0x3ff77467, 0xe364f5ff, 0x3fee6666, 0x6666666d, 0x3fb99999, 0x999999b1},
-{62,0,123,__LINE__, 0x3ff6a08a, 0x5c0218bb, 0x3fee6666, 0x6666666d, 0x3fc33333, 0x3333333f},
-{62,0,123,__LINE__, 0x3ff5d013, 0xc41adabd, 0x3fee6666, 0x6666666d, 0x3fc99999, 0x999999a6},
-{62,0,123,__LINE__, 0x3ff503fb, 0xdb7f996d, 0x3fee6666, 0x6666666d, 0x3fd00000, 0x00000006},
-{62,0,123,__LINE__, 0x3ff43d1a, 0x15f0a2f0, 0x3fee6666, 0x6666666d, 0x3fd33333, 0x33333339},
-{62,0,123,__LINE__, 0x3ff37c22, 0x148bdf87, 0x3fee6666, 0x6666666d, 0x3fd66666, 0x6666666c},
-{62,0,123,__LINE__, 0x3ff2c1a2, 0x41d66dc3, 0x3fee6666, 0x6666666d, 0x3fd99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3ff20e04, 0x55ffb83c, 0x3fee6666, 0x6666666d, 0x3fdccccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x3ff1618f, 0x66769c69, 0x3fee6666, 0x6666666d, 0x3fe00000, 0x00000003},
-{62,0,123,__LINE__, 0x3ff0bc6b, 0x13ff1d8d, 0x3fee6666, 0x6666666d, 0x3fe19999, 0x9999999d},
-{62,0,123,__LINE__, 0x3ff01ea3, 0x6abd9180, 0x3fee6666, 0x6666666d, 0x3fe33333, 0x33333337},
-{62,0,123,__LINE__, 0x3fef105a, 0x2737c3d9, 0x3fee6666, 0x6666666d, 0x3fe4cccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fedf1d3, 0x11f59121, 0x3fee6666, 0x6666666d, 0x3fe66666, 0x6666666b},
-{62,0,123,__LINE__, 0x3fece156, 0x2ac3dda1, 0x3fee6666, 0x6666666d, 0x3fe80000, 0x00000005},
-{62,0,123,__LINE__, 0x3febde70, 0xed439fe7, 0x3fee6666, 0x6666666d, 0x3fe99999, 0x9999999f},
-{62,0,123,__LINE__, 0x3feae8a0, 0x21646864, 0x3fee6666, 0x6666666d, 0x3feb3333, 0x33333339},
-{62,0,123,__LINE__, 0x3fe9ff55, 0x5176d133, 0x3fee6666, 0x6666666d, 0x3feccccc, 0xccccccd3},
-{62,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fee6666, 0x6666666d, 0x3fee6666, 0x6666666d},
-0,};
-test_atan2(m)   {run_vector_1(m,atan2_vec,(char *)(atan2),"atan2","ddd");   }	
diff --git a/newlib/libm/test/atan2f_vec.c b/newlib/libm/test/atan2f_vec.c
deleted file mode 100644
index f07ac8d0e..000000000
--- a/newlib/libm/test/atan2f_vec.c
+++ /dev/null
@@ -1,1604 +0,0 @@
-#include "test.h"
- one_line_type atan2f_vec[] = {
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbff00000, 0x00000000, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc002a4fc, 0x28e95ed8, 0xbff00000, 0x00000000, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0026dcb, 0xd423977c, 0xbff00000, 0x00000000, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc00233cb, 0x72d34279, 0xbff00000, 0x00000000, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbff00000, 0x00000000, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbff00000, 0x00000000, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc00173c1, 0xf5810bb7, 0xbff00000, 0x00000000, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0012d68, 0x46b76641, 0xbff00000, 0x00000000, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbff00000, 0x00000000, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc00096d0, 0x5371b1c4, 0xbff00000, 0x00000000, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbff00000, 0x00000000, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xbfffe5fd, 0xcebfcb86, 0xbff00000, 0x00000000, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbff00000, 0x00000000, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xbffe8500, 0x76ee9e8d, 0xbff00000, 0x00000000, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbffdcbc9, 0xedcbd8d9, 0xbff00000, 0x00000000, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbff00000, 0x00000000, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffc4a83, 0x936311d9, 0xbff00000, 0x00000000, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffb83d5, 0xc13f26b8, 0xbff00000, 0x00000000, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffaba39, 0x7c7259dc, 0xbff00000, 0x00000000, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbff9ee9c, 0x8100c211, 0xbff00000, 0x00000000, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbff00000, 0x00000000, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff8555a, 0x2787981e, 0xbff00000, 0x00000000, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff789bd, 0x2c160052, 0xbff00000, 0x00000000, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff6c020, 0xe7493376, 0xbff00000, 0x00000000, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff5f973, 0x15254855, 0xbff00000, 0x00000000, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff5368c, 0x951e9cfb, 0xbff00000, 0x00000000, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff4782c, 0xbabc8156, 0xbff00000, 0x00000000, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff3bef6, 0x3199bba1, 0xbff00000, 0x00000000, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff30b6d, 0x796a4da7, 0xbff00000, 0x00000000, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff25df8, 0xd9c88ea8, 0xbff00000, 0x00000000, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbff00000, 0x00000000, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbff11656, 0x01a4f6a5, 0xbff00000, 0x00000000, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbff07c6c, 0x6947a6a6, 0xbff00000, 0x00000000, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfefd24c, 0x36331b59, 0xbff00000, 0x00000000, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfeeb8e5, 0x7b0c8580, 0xbff00000, 0x00000000, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfedac67, 0x0561bb4c, 0xbff00000, 0x00000000, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfecac7c, 0x57846f9b, 0xbff00000, 0x00000000, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfebb8bf, 0x85c3aa79, 0xbff00000, 0x00000000, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfead0be, 0x0082566f, 0xbff00000, 0x00000000, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe9f3fc, 0xad6b38ff, 0xbff00000, 0x00000000, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0030dfc, 0xd57ce4cd, 0xbfee6666, 0x66666666, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfee6666, 0x66666666, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc002a225, 0xffe678cc, 0xbfee6666, 0x66666666, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc00267d3, 0x4beb12ff, 0xbfee6666, 0x66666666, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0022a5f, 0x18f3451e, 0xbfee6666, 0x66666666, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc001e9a5, 0xc99335b0, 0xbfee6666, 0x66666666, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc001a586, 0x8fc6c8d0, 0xbfee6666, 0x66666666, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0015de4, 0xca763c22, 0xbfee6666, 0x66666666, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc00112a9, 0x9ee56458, 0xbfee6666, 0x66666666, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc000c3c5, 0xca449e52, 0xbfee6666, 0x66666666, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0007133, 0xa108dee4, 0xbfee6666, 0x66666666, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0001af9, 0x294450fa, 0xbfee6666, 0x66666666, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xbfff8254, 0x66b1ec6c, 0xbfee6666, 0x66666666, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xbffec7d4, 0x93fc7aa8, 0xbfee6666, 0x66666666, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbffe06dc, 0x9297b73f, 0xbfee6666, 0x66666666, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffd3ffa, 0xcd08c0c2, 0xbfee6666, 0x66666666, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffc73e2, 0xe46d7f72, 0xbfee6666, 0x66666666, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffba36c, 0x4c864174, 0xbfee6666, 0x66666666, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffacf8e, 0xc523642f, 0xbfee6666, 0x66666666, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbff9f95c, 0xaa6341c4, 0xbfee6666, 0x66666666, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfee6666, 0x66666666, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff84a99, 0xfe25186a, 0xbfee6666, 0x66666666, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff77467, 0xe364f5ff, 0xbfee6666, 0x66666666, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff6a08a, 0x5c0218ba, 0xbfee6666, 0x66666666, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff5d013, 0xc41adabc, 0xbfee6666, 0x66666666, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff503fb, 0xdb7f996c, 0xbfee6666, 0x66666666, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff43d1a, 0x15f0a2ef, 0xbfee6666, 0x66666666, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff37c22, 0x148bdf86, 0xbfee6666, 0x66666666, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff2c1a2, 0x41d66dc2, 0xbfee6666, 0x66666666, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff20e04, 0x55ffb83a, 0xbfee6666, 0x66666666, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbff1618f, 0x66769c68, 0xbfee6666, 0x66666666, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbff0bc6b, 0x13ff1d8c, 0xbfee6666, 0x66666666, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbff01ea3, 0x6abd917e, 0xbfee6666, 0x66666666, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfef105a, 0x2737c3d5, 0xbfee6666, 0x66666666, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfedf1d3, 0x11f5911e, 0xbfee6666, 0x66666666, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfece156, 0x2ac3dd9e, 0xbfee6666, 0x66666666, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfebde70, 0xed439fe3, 0xbfee6666, 0x66666666, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfeae8a0, 0x21646861, 0xbfee6666, 0x66666666, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe9ff55, 0x5176d12f, 0xbfee6666, 0x66666666, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d15, 0xbfee6666, 0x66666666, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc003452d, 0x2a42ac29, 0xbfeccccc, 0xcccccccc, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc00310d2, 0xfe7fcad9, 0xbfeccccc, 0xcccccccc, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfeccccc, 0xcccccccc, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0029efc, 0xe9f0f591, 0xbfeccccc, 0xcccccccc, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0026127, 0x862b05f6, 0xbfeccccc, 0xcccccccc, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfeccccc, 0xcccccccc, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc001dace, 0xaa5dc056, 0xbfeccccc, 0xcccccccc, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc00191fb, 0xf721ce52, 0xbfeccccc, 0xcccccccc, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfeccccc, 0xcccccccc, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc000f46b, 0x88a03601, 0xbfeccccc, 0xcccccccc, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0009f87, 0x5343d018, 0xbfeccccc, 0xcccccccc, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfeccccc, 0xcccccccc, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xbfffd307, 0x52e3200b, 0xbfeccccc, 0xcccccccc, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xbfff1127, 0x088152ad, 0xbfeccccc, 0xcccccccc, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfeccccc, 0xcccccccc, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffd77c7, 0xb196b320, 0xbfeccccc, 0xcccccccc, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffca1a6, 0x56770bcf, 0xbfeccccc, 0xcccccccc, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffbc66e, 0x44cbc073, 0xbfeccccc, 0xcccccccc, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffae73b, 0xd5e44e5a, 0xbfeccccc, 0xcccccccc, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa054d, 0xbad44abd, 0xbfeccccc, 0xcccccccc, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfeccccc, 0xcccccccc, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff83ea8, 0xedb40f71, 0xbfeccccc, 0xcccccccc, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff75cba, 0xd2a40bd4, 0xbfeccccc, 0xcccccccc, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff67d88, 0x63bc99bb, 0xbfeccccc, 0xcccccccc, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff5a250, 0x52114e5e, 0xbfeccccc, 0xcccccccc, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff4cc2e, 0xf6f1a70e, 0xbfeccccc, 0xcccccccc, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a855e, 0xbfeccccc, 0xcccccccc, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff332cf, 0xa0070782, 0xbfeccccc, 0xcccccccc, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff270ef, 0x55a53a23, 0xbfeccccc, 0xcccccccc, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbfeccccc, 0xcccccccc, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbff104e8, 0x0200b9fe, 0xbfeccccc, 0xcccccccc, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbff05b1f, 0x9747ee2c, 0xbfeccccc, 0xcccccccc, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f698, 0xbfeccccc, 0xcccccccc, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfee3ffd, 0x74897b16, 0xbfeccccc, 0xcccccccc, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfed1cb2, 0xa799b303, 0xbfeccccc, 0xcccccccc, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfec08aa, 0xe496efa3, 0xbfeccccc, 0xcccccccc, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfeb034f, 0x38649c84, 0xbfeccccc, 0xcccccccc, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfea0bf9, 0xa94cde18, 0xbfeccccc, 0xcccccccc, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfeccccc, 0xcccccccc, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe844a1, 0x571188fa, 0xbfeccccc, 0xcccccccc, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0037f2d, 0x8b93012c, 0xbfeb3333, 0x33333332, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0034b25, 0xb27b30a5, 0xbfeb3333, 0x33333332, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc00313fc, 0x14754e13, 0xbfeb3333, 0x33333332, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfeb3333, 0x33333332, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0029b71, 0xd79223d7, 0xbfeb3333, 0x33333332, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc00259a7, 0x10566dda, 0xbfeb3333, 0x33333332, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc00213e8, 0x74487c34, 0xbfeb3333, 0x33333332, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc001ca05, 0x51b12411, 0xbfeb3333, 0x33333332, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0017bd2, 0x1306a2e0, 0xbfeb3333, 0x33333332, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc001292a, 0xcb9e5e97, 0xbfeb3333, 0x33333332, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc000d1f6, 0x365d11c8, 0xbfeb3333, 0x33333332, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0007629, 0x16cab416, 0xbfeb3333, 0x33333332, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc00015c9, 0xda46bdfc, 0xbfeb3333, 0x33333332, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xbfff61e8, 0x80287a21, 0xbfeb3333, 0x33333332, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbffe8fb9, 0x6bf1d8f4, 0xbfeb3333, 0x33333332, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffdb5a6, 0x01769193, 0xbfeb3333, 0x33333332, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffcd487, 0x74e47389, 0xbfeb3333, 0x33333332, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffbed70, 0x67a8594d, 0xbfeb3333, 0x33333332, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffb01a8, 0xbf84055c, 0xbfeb3333, 0x33333332, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa12a5, 0x465464cf, 0xbfeb3333, 0x33333332, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d17, 0xbfeb3333, 0x33333332, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff83151, 0x6233f55f, 0xbfeb3333, 0x33333332, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff7424d, 0xe90454d2, 0xbfeb3333, 0x33333332, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff65686, 0x40e000e1, 0xbfeb3333, 0x33333332, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff56f6f, 0x33a3e6a5, 0xbfeb3333, 0x33333332, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff48e50, 0xa711c89b, 0xbfeb3333, 0x33333332, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff3b43d, 0x3c96813a, 0xbfeb3333, 0x33333332, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff2e20e, 0x285fe00d, 0xbfeb3333, 0x33333332, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff21862, 0xf3fade35, 0xbfeb3333, 0x33333332, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff157a4, 0x7af2f203, 0xbfeb3333, 0x33333332, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbff0a00a, 0x3bce369d, 0xbfeb3333, 0x33333332, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfefe342, 0x229739ff, 0xbfeb3333, 0x33333332, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfee98a5, 0x04f628d9, 0xbfeb3333, 0x33333332, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfed5fd8, 0x0a4c2417, 0xbfeb3333, 0x33333332, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfec384b, 0x7feec38c, 0xbfeb3333, 0x33333332, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfeb2151, 0x0fb6fcf3, 0xbfeb3333, 0x33333332, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfea1a25, 0xf2c82502, 0xbfeb3333, 0x33333332, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfeb3333, 0x33333332, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe837fc, 0xff3b7c10, 0xbfeb3333, 0x33333332, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe75b56, 0x8723f1c8, 0xbfeb3333, 0x33333332, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfe99999, 0x99999998, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0038899, 0xe572fe86, 0xbfe99999, 0x99999998, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc00351d1, 0x783b3dae, 0xbfe99999, 0x99999998, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0031787, 0x26d41fce, 0xbfe99999, 0x99999998, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe99999, 0x99999998, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0029771, 0xd7e7791f, 0xbfe99999, 0x99999998, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0025127, 0x9b802819, 0xbfe99999, 0x99999998, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0020660, 0x0be7bd52, 0xbfe99999, 0x99999998, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfe99999, 0x99999998, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0016279, 0xb155a47a, 0xbfe99999, 0x99999998, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0010900, 0x9519d638, 0xbfe99999, 0x99999998, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc000aa5d, 0x4f58e2c0, 0xbfe99999, 0x99999998, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe99999, 0x99999998, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xbfffbb37, 0x05373617, 0xbfe99999, 0x99999998, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbffedf81, 0xa4bd64d3, 0xbfe99999, 0x99999998, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffdfa99, 0x2206280a, 0xbfe99999, 0x99999998, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbfe99999, 0x99999998, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffc192a, 0xbdbdf878, 0xbfe99999, 0x99999998, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffb1f56, 0xfdeef00e, 0xbfe99999, 0x99999998, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa21a6, 0x31fd9506, 0xbfe99999, 0x99999998, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe99999, 0x99999998, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff82250, 0x768ac527, 0xbfe99999, 0x99999998, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff7249f, 0xaa996a20, 0xbfe99999, 0x99999998, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff62acb, 0xeaca61b6, 0xbfe99999, 0x99999998, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff5368c, 0x951e9cfb, 0xbfe99999, 0x99999998, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff4495d, 0x86823223, 0xbfe99999, 0x99999998, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff36475, 0x03caf55a, 0xbfe99999, 0x99999998, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff288bf, 0xa3512417, 0xbfe99999, 0x99999998, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe43, 0xbfe99999, 0x99999998, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff0ef3c, 0x09d694af, 0xbfe99999, 0x99999998, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbff031f5, 0x7e54adbc, 0xbfe99999, 0x99999998, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfeefe06, 0x8bba2272, 0xbfe99999, 0x99999998, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfedac67, 0x0561bb4c, 0xbfe99999, 0x99999998, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfec6e6d, 0x2171bf14, 0xbfe99999, 0x99999998, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfeb434e, 0xe31013f8, 0xbfe99999, 0x99999998, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfea2a25, 0xf172cfdf, 0xbfe99999, 0x99999998, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfe99999, 0x99999998, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe829d0, 0xb5c03526, 0xbfe99999, 0x99999998, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe740a7, 0x7023bda5, 0xbfe99999, 0x99999998, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe66585, 0xbb44ba45, 0xbfe99999, 0x99999998, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfe7ffff, 0xfffffffe, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc003c953, 0x34d30df5, 0xbfe7ffff, 0xfffffffe, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfe7ffff, 0xfffffffe, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0035951, 0xee0fd5ca, 0xbfe7ffff, 0xfffffffe, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0031b87, 0x267eca85, 0xbfe7ffff, 0xfffffffe, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe7ffff, 0xfffffffe, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc00292e4, 0xc2c70244, 0xbfe7ffff, 0xfffffffe, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0024772, 0xd9496c96, 0xbfe7ffff, 0xfffffffe, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfe7ffff, 0xfffffffe, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc001a0dc, 0x49296b7e, 0xbfe7ffff, 0xfffffffe, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfe7ffff, 0xfffffffe, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfe7ffff, 0xfffffffe, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0007c6c, 0x6947a6a8, 0xbfe7ffff, 0xfffffffe, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc0000f34, 0x0b81a4ef, 0xbfe7ffff, 0xfffffffe, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbfe7ffff, 0xfffffffe, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfe7ffff, 0xfffffffe, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffd4d68, 0xbe213418, 0xbfe7ffff, 0xfffffffe, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffc4a83, 0x936311d9, 0xbfe7ffff, 0xfffffffe, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffb40e9, 0xaf482898, 0xbfe7ffff, 0xfffffffe, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa32a5, 0x1baa2089, 0xbfe7ffff, 0xfffffffe, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe7ffff, 0xfffffffe, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff81151, 0x8cde39a4, 0xbfe7ffff, 0xfffffffe, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff7030c, 0xf9403195, 0xbfe7ffff, 0xfffffffe, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff5f973, 0x15254855, 0xbfe7ffff, 0xfffffffe, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff4f68d, 0xea672615, 0xbfe7ffff, 0xfffffffe, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a855e, 0xbfe7ffff, 0xfffffffe, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff30b6d, 0x796a4da6, 0xbfe7ffff, 0xfffffffe, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff2258e, 0x9185104f, 0xbfe7ffff, 0xfffffffe, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff14b1d, 0xd5f90cdf, 0xbfe7ffff, 0xfffffffe, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbff07c6c, 0x6947a6a6, 0xbfe7ffff, 0xfffffffe, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f697, 0xbfe7ffff, 0xfffffffe, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfee047c, 0x2c6b0665, 0xbfe7ffff, 0xfffffffe, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfecac7c, 0x57846f9a, 0xbfe7ffff, 0xfffffffe, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfeb6a21, 0xebeb0204, 0xbfe7ffff, 0xfffffffe, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfea3c5a, 0x45f4ab4c, 0xbfe7ffff, 0xfffffffe, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d14, 0xbfe7ffff, 0xfffffffe, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe819d0, 0xb7158a48, 0xbfe7ffff, 0xfffffffe, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe722a5, 0x98d15d35, 0xbfe7ffff, 0xfffffffe, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a86, 0xbfe7ffff, 0xfffffffe, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe562a0, 0x7dc47c8a, 0xbfe7ffff, 0xfffffffe, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0043f37, 0x08e537ed, 0xbfe66666, 0x66666664, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0040d72, 0x6e9f7ad5, 0xbfe66666, 0x66666664, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc003d82a, 0x5408834e, 0xbfe66666, 0x66666664, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0039f10, 0x8a1dc770, 0xbfe66666, 0x66666664, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc00361d1, 0x62e61b8c, 0xbfe66666, 0x66666664, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0032014, 0x3b9f4160, 0xbfe66666, 0x66666664, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe66666, 0x66666664, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0028dab, 0x4b5b59d0, 0xbfe66666, 0x66666664, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0023c41, 0xea611604, 0xbfe66666, 0x66666664, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc001e4e5, 0x5817921e, 0xbfe66666, 0x66666664, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0018743, 0x06ef5824, 0xbfe66666, 0x66666664, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0012317, 0x0c990104, 0xbfe66666, 0x66666664, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc000b833, 0xbe165cc8, 0xbfe66666, 0x66666664, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe66666, 0x66666664, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xbfff9c6b, 0x238c6434, 0xbfe66666, 0x66666664, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffe9f02, 0x0021cec6, 0xbfe66666, 0x66666664, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffd95e5, 0xac22d08b, 0xbfe66666, 0x66666664, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffc829e, 0xbb6db38c, 0xbfe66666, 0x66666664, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffb6731, 0x2cd2f433, 0xbfe66666, 0x66666664, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa460e, 0xa017978f, 0xbfe66666, 0x66666664, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe66666, 0x66666664, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff7fde8, 0x0870c29e, 0xbfe66666, 0x66666664, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff6dcc5, 0x7bb565fa, 0xbfe66666, 0x66666664, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff5c157, 0xed1aa6a1, 0xbfe66666, 0x66666664, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff4ae10, 0xfc6589a2, 0xbfe66666, 0x66666664, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff3a4f4, 0xa8668b67, 0xbfe66666, 0x66666664, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff2a78b, 0x84fbf5fa, 0xbfe66666, 0x66666664, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe42, 0xbfe66666, 0x66666664, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff0d38f, 0x2c5ba09c, 0xbfe66666, 0x66666664, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfeffb91, 0x1eacb04d, 0xbfe66666, 0x66666664, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfee6ae1, 0x355353cb, 0xbfe66666, 0x66666664, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfecf457, 0xf0b26be3, 0xbfe66666, 0x66666664, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfeb96e5, 0xa78c5c4d, 0xbfe66666, 0x66666664, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfea5140, 0x23a34d1b, 0xbfe66666, 0x66666664, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d13, 0xbfe66666, 0x66666664, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe8079c, 0x6293aeda, 0xbfe66666, 0x66666664, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe700a7, 0xc578462f, 0xbfe66666, 0x66666664, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe60bab, 0x2899969c, 0xbfe66666, 0x66666664, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe52744, 0x00eea726, 0xbfe66666, 0x66666664, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe45223, 0x9692c90b, 0xbfe66666, 0x66666664, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0048590, 0xb7aedd64, 0xbfe4cccc, 0xccccccca, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0045514, 0x33f00783, 0xbfe4cccc, 0xccccccca, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc00420fd, 0x07447553, 0xbfe4cccc, 0xccccccca, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc003e8f3, 0xacb51f93, 0xbfe4cccc, 0xccccccca, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc003ac98, 0xf27e8652, 0xbfe4cccc, 0xccccccca, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0036b86, 0x251cd70e, 0xbfe4cccc, 0xccccccca, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc003254d, 0xb30ae9d4, 0xbfe4cccc, 0xccccccca, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe4cccc, 0xccccccca, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc002879c, 0x26a5479d, 0xbfe4cccc, 0xccccccca, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0022f36, 0x8bf3da20, 0xbfe4cccc, 0xccccccca, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc001cfdb, 0x0358ca07, 0xbfe4cccc, 0xccccccca, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0016925, 0x7715b184, 0xbfe4cccc, 0xccccccca, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc000fac7, 0xc0872c2c, 0xbfe4cccc, 0xccccccca, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc0008495, 0x326f4bf1, 0xbfe4cccc, 0xccccccca, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc000068f, 0xdf56fb0a, 0xbfe4cccc, 0xccccccca, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbfff01ec, 0xffc750b0, 0xbfe4cccc, 0xccccccca, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffde8a2, 0x25150890, 0xbfe4cccc, 0xccccccca, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffcc2f3, 0x2876c449, 0xbfe4cccc, 0xccccccca, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffb933b, 0xc05799c0, 0xbfe4cccc, 0xccccccca, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa5c70, 0x7de844b3, 0xbfe4cccc, 0xccccccca, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe4cccc, 0xccccccca, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff7e786, 0x2aa01579, 0xbfe4cccc, 0xccccccca, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff6b0ba, 0xe830c06d, 0xbfe4cccc, 0xccccccca, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff58103, 0x801195e3, 0xbfe4cccc, 0xccccccca, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff45b54, 0x8373519d, 0xbfe4cccc, 0xccccccca, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff34209, 0xa8c1097d, 0xbfe4cccc, 0xccccccca, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff236d6, 0xe9da641a, 0xbfe4cccc, 0xccccccca, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff13acc, 0x43a9c24b, 0xbfe4cccc, 0xccccccca, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbff04e67, 0x277a01d5, 0xbfe4cccc, 0xccccccca, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfeee357, 0x74b9ee4d, 0xbfe4cccc, 0xccccccca, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfed4881, 0x43ad8c3f, 0xbfe4cccc, 0xccccccca, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfebcb13, 0x21414bdb, 0xbfe4cccc, 0xccccccca, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfea697c, 0xb67b95e9, 0xbfe4cccc, 0xccccccca, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d13, 0xbfe4cccc, 0xccccccca, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe7f2b6, 0x84e50d0b, 0xbfe4cccc, 0xccccccca, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe6d9d4, 0xbc9d5822, 0xbfe4cccc, 0xccccccca, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe5d589, 0x87169b13, 0xbfe4cccc, 0xccccccca, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe4e41e, 0x9e3c3610, 0xbfe4cccc, 0xccccccca, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe403f9, 0x33fedf12, 0xbfe4cccc, 0xccccccca, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe3339c, 0x81509652, 0xbfe4cccc, 0xccccccca, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfe33333, 0x33333330, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc004a04f, 0x5f80df4c, 0xbfe33333, 0x33333330, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfe33333, 0x33333330, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0043726, 0xeb5fa0c4, 0xbfe33333, 0x33333330, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfe33333, 0x33333330, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfe33333, 0x33333330, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc00376b7, 0x14052da1, 0xbfe33333, 0x33333330, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0032b5c, 0xd7c0fc08, 0xbfe33333, 0x33333330, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe33333, 0x33333330, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc002807f, 0xb6bd9fb0, 0xbfe33333, 0x33333330, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfe33333, 0x33333330, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfe33333, 0x33333330, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfe33333, 0x33333330, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc000ca7c, 0xc2d0d7fc, 0xbfe33333, 0x33333330, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfe33333, 0x33333330, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbfff730b, 0xd281f69a, 0xbfe33333, 0x33333330, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4d0, 0xbfe33333, 0x33333330, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffd0d6a, 0x1369bd33, 0xbfe33333, 0x33333330, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffbc66e, 0x44cbc073, 0xbfe33333, 0x33333330, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa7687, 0x3ac2bc7b, 0xbfe33333, 0x33333330, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe33333, 0x33333330, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff7cd6f, 0x6dc59db2, 0xbfe33333, 0x33333330, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff67d88, 0x63bc99ba, 0xbfe33333, 0x33333330, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff5368c, 0x951e9cfa, 0xbfe33333, 0x33333330, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a855d, 0xbfe33333, 0x33333330, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff2d0ea, 0xd6066392, 0xbfe33333, 0x33333330, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe41, 0xbfe33333, 0x33333330, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff0aefd, 0x22e6aa34, 0xbfe33333, 0x33333330, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f696, 0xbfe33333, 0x33333330, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfedac67, 0x0561bb4a, 0xbfe33333, 0x33333330, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfec08aa, 0xe496efa0, 0xbfe33333, 0x33333330, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfea85ee, 0x761a359c, 0xbfe33333, 0x33333330, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfe33333, 0x33333330, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe7da79, 0xf20cc43d, 0xbfe33333, 0x33333330, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe6ad11, 0x00fbfdd9, 0xbfe33333, 0x33333330, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe5977a, 0x5103ea8c, 0xbfe33333, 0x33333330, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe4978f, 0xa3269edb, 0xbfe33333, 0x33333330, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe3ab51, 0xa392314e, 0xbfe33333, 0x33333330, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd6066390, 0xbfe33333, 0x33333330, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe206af, 0xd30d372c, 0xbfe33333, 0x33333330, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0051c28, 0xaaf491e0, 0xbfe19999, 0x99999996, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc004ef33, 0x3421a553, 0xbfe19999, 0x99999996, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc004be8d, 0x75c60da4, 0xbfe19999, 0x99999996, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc00489ce, 0x32c7e50e, 0xbfe19999, 0x99999996, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc004507f, 0x4d109f2a, 0xbfe19999, 0x99999996, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc004121c, 0xb53cd827, 0xbfe19999, 0x99999996, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc003ce13, 0xa64eb186, 0xbfe19999, 0x99999996, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc00383c2, 0x72726984, 0xbfe19999, 0x99999996, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0033279, 0x47a8a3f5, 0xbfe19999, 0x99999996, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfe19999, 0x99999996, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0027809, 0x3f2fcc25, 0xbfe19999, 0x99999996, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0020d5d, 0x6b1c0b70, 0xbfe19999, 0x99999996, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc00198c4, 0x031217a4, 0xbfe19999, 0x99999996, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc00119a6, 0xfe19b276, 0xbfe19999, 0x99999996, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0008fa7, 0x2899ef94, 0xbfe19999, 0x99999996, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xbffff572, 0xaded0be8, 0xbfe19999, 0x99999996, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbffeb68c, 0x3ba726dd, 0xbfe19999, 0x99999996, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffd648c, 0xd67db72a, 0xbfe19999, 0x99999996, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffc02a9, 0x647f0db4, 0xbfe19999, 0x99999996, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffa9553, 0x1c6d8e5d, 0xbfe19999, 0x99999996, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d16, 0xbfe19999, 0x99999996, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff7aea3, 0x8c1acbce, 0xbfe19999, 0x99999996, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff6414d, 0x44094c78, 0xbfe19999, 0x99999996, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff4df69, 0xd20aa302, 0xbfe19999, 0x99999996, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff38d6a, 0x6ce1334f, 0xbfe19999, 0x99999996, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff24e83, 0xfa9b4e45, 0xbfe19999, 0x99999996, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff124a8, 0x57547b04, 0xbfe19999, 0x99999996, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbff010a8, 0xac54f541, 0xbfe19999, 0x99999996, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfee24dd, 0x44c855cb, 0xbfe19999, 0x99999996, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfec5277, 0xa4a0869c, 0xbfe19999, 0x99999996, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfeaa7c8, 0x545183c7, 0xbfe19999, 0x99999996, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfe19999, 0x99999996, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe7be08, 0x326e2489, 0xbfe19999, 0x99999996, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe678e3, 0x87470e4a, 0xbfe19999, 0x99999996, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe54f9e, 0xb7d5ee43, 0xbfe19999, 0x99999996, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe43f7a, 0x7c1d53c1, 0xbfe19999, 0x99999996, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe345f0, 0x1cce37b5, 0xbfe19999, 0x99999996, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe260b4, 0x85f12028, 0xbfe19999, 0x99999996, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe18db7, 0x79f87dcf, 0xbfe19999, 0x99999996, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfe0cb20, 0x808a1f11, 0xbfe19999, 0x99999996, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfdfffff, 0xfffffff9, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc00541c5, 0x5d5d64c1, 0xbfdfffff, 0xfffffff9, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0051371, 0xab22738d, 0xbfdfffff, 0xfffffff9, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc004e102, 0xc80931dc, 0xbfdfffff, 0xfffffff9, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc004a9f8, 0x694c6d6c, 0xbfdfffff, 0xfffffff9, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfdfffff, 0xfffffff9, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0042bb5, 0xf776eb80, 0xbfdfffff, 0xfffffff9, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc003e31d, 0xfb0d799d, 0xbfdfffff, 0xfffffff9, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfdfffff, 0xfffffff9, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0033aef, 0xbf36777f, 0xbfdfffff, 0xfffffff9, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfdfffff, 0xfffffff9, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0026dcb, 0xd423977c, 0xbfdfffff, 0xfffffff9, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfdfffff, 0xfffffff9, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc00173c1, 0xf5810bb7, 0xbfdfffff, 0xfffffff9, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfdfffff, 0xfffffff9, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfdfffff, 0xfffffff9, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbfff3889, 0x2f1e0c87, 0xbfdfffff, 0xfffffff9, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffdcbc9, 0xedcbd8d9, 0xbfdfffff, 0xfffffff9, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffc4a83, 0x936311d8, 0xbfdfffff, 0xfffffff9, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffaba39, 0x7c7259db, 0xbfdfffff, 0xfffffff9, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfdfffff, 0xfffffff9, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff789bd, 0x2c160050, 0xbfdfffff, 0xfffffff9, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff5f973, 0x15254853, 0xbfdfffff, 0xfffffff9, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff4782c, 0xbabc8153, 0xbfdfffff, 0xfffffff9, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff30b6d, 0x796a4da4, 0xbfdfffff, 0xfffffff9, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe41, 0xbfdfffff, 0xfffffff9, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbff07c6c, 0x6947a6a4, 0xbfdfffff, 0xfffffff9, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfeeb8e5, 0x7b0c857c, 0xbfdfffff, 0xfffffff9, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfecac7c, 0x57846f97, 0xbfdfffff, 0xfffffff9, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfead0be, 0x0082566c, 0xbfdfffff, 0xfffffff9, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfdfffff, 0xfffffff9, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfe79c2e, 0x5436d65d, 0xbfdfffff, 0xfffffff9, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a84, 0xbfdfffff, 0xfffffff9, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe4fb75, 0x64dacde6, 0xbfdfffff, 0xfffffff9, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe3d915, 0x7335065a, 0xbfdfffff, 0xfffffff9, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd606638f, 0xbfdfffff, 0xfffffff9, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe1e00b, 0xabdefead, 0xbfdfffff, 0xfffffff9, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe103e2, 0x30ebeced, 0xbfdfffff, 0xfffffff9, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe03a26, 0xa486e62b, 0xbfdfffff, 0xfffffff9, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfdf01af, 0xb73642b2, 0xbfdfffff, 0xfffffff9, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc005bffa, 0x17065de2, 0xbfdccccc, 0xccccccc6, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc00597ff, 0xd521f2aa, 0xbfdccccc, 0xccccccc6, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfdccccc, 0xccccccc6, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0053ccf, 0xe79b8f8f, 0xbfdccccc, 0xccccccc6, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc005089b, 0xaf0d60e5, 0xbfdccccc, 0xccccccc6, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfdccccc, 0xccccccc6, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0048fe1, 0xf1cd42a1, 0xbfdccccc, 0xccccccc6, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc00449d3, 0x87509221, 0xbfdccccc, 0xccccccc6, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfdccccc, 0xccccccc6, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc003a59b, 0x934a3835, 0xbfdccccc, 0xccccccc6, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc003452d, 0x2a42ac29, 0xbfdccccc, 0xccccccc6, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfdccccc, 0xccccccc6, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0026127, 0x862b05f6, 0xbfdccccc, 0xccccccc6, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc001dace, 0xaa5dc056, 0xbfdccccc, 0xccccccc6, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfdccccc, 0xccccccc6, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc0009f87, 0x5343d018, 0xbfdccccc, 0xccccccc6, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xbfffd307, 0x52e3200b, 0xbfdccccc, 0xccccccc6, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4cf, 0xbfdccccc, 0xccccccc6, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffca1a6, 0x56770bcf, 0xbfdccccc, 0xccccccc6, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffae73b, 0xd5e44e59, 0xbfdccccc, 0xccccccc6, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfdccccc, 0xccccccc6, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff75cba, 0xd2a40bd2, 0xbfdccccc, 0xccccccc6, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff5a250, 0x52114e5c, 0xbfdccccc, 0xccccccc6, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a855c, 0xbfdccccc, 0xccccccc6, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff270ef, 0x55a53a20, 0xbfdccccc, 0xccccccc6, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff104e8, 0x0200b9fc, 0xbfdccccc, 0xccccccc6, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f693, 0xbfdccccc, 0xccccccc6, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfed1cb2, 0xa799b2ff, 0xbfdccccc, 0xccccccc6, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfeb034f, 0x38649c81, 0xbfdccccc, 0xccccccc6, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d12, 0xbfdccccc, 0xccccccc6, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfe77338, 0xa80603b8, 0xbfdccccc, 0xccccccc6, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfe5f17f, 0x03e7d388, 0xbfdccccc, 0xccccccc6, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe4978f, 0xa3269edb, 0xbfdccccc, 0xccccccc6, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe3609f, 0x33ce6bd8, 0xbfdccccc, 0xccccccc6, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe24865, 0x89dba9d9, 0xbfdccccc, 0xccccccc6, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cdb, 0xbfdccccc, 0xccccccc6, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfe0657e, 0x94db30ca, 0xbfdccccc, 0xccccccc6, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfdf295b, 0x6544ec43, 0xbfdccccc, 0xccccccc6, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb44, 0xbfdccccc, 0xccccccc6, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfdc4fdb, 0xf911d369, 0xbfdccccc, 0xccccccc6, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfd99999, 0x99999993, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc005f1ce, 0xcb0d4d6e, 0xbfd99999, 0x99999993, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc005c975, 0x54f4b39f, 0xbfd99999, 0x99999993, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0059d2f, 0x241f85a8, 0xbfd99999, 0x99999993, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd99999, 0x99999993, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc005368c, 0x951e9cfd, 0xbfd99999, 0x99999993, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc004fac5, 0x404fe6dc, 0xbfd99999, 0x99999993, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc004b831, 0x3ddf1778, 0xbfd99999, 0x99999993, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfd99999, 0x99999993, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0041a34, 0xfb542c00, 0xbfd99999, 0x99999993, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfd99999, 0x99999993, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc00351d1, 0x783b3dae, 0xbfd99999, 0x99999993, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd99999, 0x99999993, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc0025127, 0x9b802819, 0xbfd99999, 0x99999993, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfd99999, 0x99999993, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc0010900, 0x9519d639, 0xbfd99999, 0x99999993, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfd99999, 0x99999993, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbffedf81, 0xa4bd64d3, 0xbfd99999, 0x99999993, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffd0d6a, 0x1369bd32, 0xbfd99999, 0x99999993, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffb1f56, 0xfdeef00d, 0xbfd99999, 0x99999993, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d15, 0xbfd99999, 0x99999993, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff7249f, 0xaa996a1d, 0xbfd99999, 0x99999993, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff5368c, 0x951e9cf8, 0xbfd99999, 0x99999993, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff36475, 0x03caf558, 0xbfd99999, 0x99999993, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe40, 0xbfd99999, 0x99999993, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbff031f5, 0x7e54adba, 0xbfd99999, 0x99999993, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfedac67, 0x0561bb47, 0xbfd99999, 0x99999993, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfeb434e, 0xe31013f5, 0xbfd99999, 0x99999993, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d11, 0xbfd99999, 0x99999993, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe740a7, 0x7023bda2, 0xbfd99999, 0x99999993, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfe5977a, 0x5103ea8b, 0xbfd99999, 0x99999993, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfe41f19, 0x63c00458, 0xbfd99999, 0x99999993, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd606638f, 0xbfd99999, 0x99999993, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe1a728, 0x5994567c, 0xbfd99999, 0x99999993, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe09cd8, 0x4fd118ed, 0xbfd99999, 0x99999993, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfdf5b75, 0xf92c80d1, 0xbfd99999, 0x99999993, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb43, 0xbfd99999, 0x99999993, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfdc2661, 0x81253b7c, 0xbfd99999, 0x99999993, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfdac42f, 0xfa7bcbc4, 0xbfd99999, 0x99999993, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfd98164, 0x49b6fd49, 0xbfd99999, 0x99999993, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0067078, 0xc2eef45e, 0xbfd66666, 0x66666660, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0064f0e, 0xb4680650, 0xbfd66666, 0x66666660, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0062a65, 0x7a259a4e, 0xbfd66666, 0x66666660, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0060204, 0xbe520694, 0xbfd66666, 0x66666660, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc005d55d, 0x7bcaa899, 0xbfd66666, 0x66666660, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc005a3c4, 0xf2e49eb6, 0xbfd66666, 0x66666660, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd66666, 0x66666660, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0052e63, 0xcbf6f7b3, 0xbfd66666, 0x66666660, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc004e87c, 0x3b956ba8, 0xbfd66666, 0x66666660, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0049952, 0x004c912f, 0xbfd66666, 0x66666660, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0043f37, 0x08e537ed, 0xbfd66666, 0x66666660, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc003d82a, 0x5408834e, 0xbfd66666, 0x66666660, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc00361d1, 0x62e61b8c, 0xbfd66666, 0x66666660, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd66666, 0x66666660, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0023c41, 0xea611604, 0xbfd66666, 0x66666660, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc0018743, 0x06ef5824, 0xbfd66666, 0x66666660, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc000b833, 0xbe165cc8, 0xbfd66666, 0x66666660, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xbfff9c6b, 0x238c6433, 0xbfd66666, 0x66666660, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffd95e5, 0xac22d08a, 0xbfd66666, 0x66666660, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffb6731, 0x2cd2f431, 0xbfd66666, 0x66666660, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d14, 0xbfd66666, 0x66666660, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff6dcc5, 0x7bb565f8, 0xbfd66666, 0x66666660, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff4ae10, 0xfc6589a0, 0xbfd66666, 0x66666660, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff2a78b, 0x84fbf5f7, 0xbfd66666, 0x66666660, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbff0d38f, 0x2c5ba099, 0xbfd66666, 0x66666660, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfee6ae1, 0x355353c6, 0xbfd66666, 0x66666660, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfeb96e5, 0xa78c5c48, 0xbfd66666, 0x66666660, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d10, 0xbfd66666, 0x66666660, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfe700a7, 0xc578462c, 0xbfd66666, 0x66666660, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe52744, 0x00eea723, 0xbfd66666, 0x66666660, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfe38b11, 0x2d7bd4a6, 0xbfd66666, 0x66666660, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfe222a5, 0x4fde6fa1, 0xbfd66666, 0x66666660, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfe0e5fc, 0x62bb05bd, 0xbfd66666, 0x66666660, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfdf9cbc, 0x4269ab1e, 0xbfd66666, 0x66666660, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb43, 0xbfd66666, 0x66666660, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfdbf1b3, 0x0afc730f, 0xbfd66666, 0x66666660, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfda64ee, 0xc3cc23f1, 0xbfd66666, 0x66666660, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfd8ffb4, 0xaf91341a, 0xbfd66666, 0x66666660, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfd7bcae, 0xd0f4964a, 0xbfd66666, 0x66666660, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfd69764, 0xfee13639, 0xbfd66666, 0x66666660, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc006cd14, 0x07805738, 0xbfd33333, 0x3333332d, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc006af8a, 0xb51a6805, 0xbfd33333, 0x3333332d, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfd33333, 0x3333332d, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0066b1c, 0x486d572a, 0xbfd33333, 0x3333332d, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0064338, 0x2c07913b, 0xbfd33333, 0x3333332d, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfd33333, 0x3333332d, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc005e4c3, 0x6ca0118b, 0xbfd33333, 0x3333332d, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc005ac69, 0x1f0f489b, 0xbfd33333, 0x3333332d, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfd33333, 0x3333332d, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc0052351, 0xd5cc5410, 0xbfd33333, 0x3333332d, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc004cf33, 0xdec5e9e0, 0xbfd33333, 0x3333332d, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfd33333, 0x3333332d, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfd33333, 0x3333332d, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc00376b7, 0x14052da1, 0xbfd33333, 0x3333332d, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfd33333, 0x3333332d, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc0021fd0, 0x9b1e712e, 0xbfd33333, 0x3333332d, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af71, 0xbfd33333, 0x3333332d, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df6, 0xbfd33333, 0x3333332d, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4ce, 0xbfd33333, 0x3333332d, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffbc66e, 0x44cbc071, 0xbfd33333, 0x3333332d, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d13, 0xbfd33333, 0x3333332d, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff67d88, 0x63bc99b7, 0xbfd33333, 0x3333332d, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a855a, 0xbfd33333, 0x3333332d, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe3e, 0xbfd33333, 0x3333332d, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f68f, 0xbfd33333, 0x3333332d, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfec08aa, 0xe496ef9b, 0xbfd33333, 0x3333332d, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d0e, 0xbfd33333, 0x3333332d, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe6ad11, 0x00fbfdd6, 0xbfd33333, 0x3333332d, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfe4978f, 0xa3269ed9, 0xbfd33333, 0x3333332d, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd606638e, 0xbfd33333, 0x3333332d, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cd9, 0xbfd33333, 0x3333332d, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfdff54b, 0xf3bec834, 0xbfd33333, 0x3333332d, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb42, 0xbfd33333, 0x3333332d, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfdbac91, 0xa9a723e0, 0xbfd33333, 0x3333332d, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfd9e9bf, 0x3d20dc65, 0xbfd33333, 0x3333332d, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfd85a37, 0x6b677db4, 0xbfd33333, 0x3333332d, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfd6f619, 0x41e4dee5, 0xbfd33333, 0x3333332d, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfd5b6f8, 0x5eb6af69, 0xbfd33333, 0x3333332d, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269ed7, 0xbfd33333, 0x3333332d, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfd39384, 0xf94e2896, 0xbfd33333, 0x3333332d, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfcfffff, 0xfffffff4, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc00712fb, 0x97e1e344, 0xbfcfffff, 0xfffffff4, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc006f715, 0x259aea15, 0xbfcfffff, 0xfffffff4, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc006d825, 0xfdaafadb, 0xbfcfffff, 0xfffffff4, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc006b5ac, 0x6d632fa0, 0xbfcfffff, 0xfffffff4, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfcfffff, 0xfffffff4, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0066377, 0xfe555c41, 0xbfcfffff, 0xfffffff4, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc0063202, 0x7e829b4d, 0xbfcfffff, 0xfffffff4, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc005f973, 0x15254857, 0xbfcfffff, 0xfffffff4, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc005b83f, 0xa76fbdb1, 0xbfcfffff, 0xfffffff4, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfcfffff, 0xfffffff4, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0051371, 0xab22738c, 0xbfcfffff, 0xfffffff4, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc004a9f8, 0x694c6d6c, 0xbfcfffff, 0xfffffff4, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc0042bb5, 0xf776eb80, 0xbfcfffff, 0xfffffff4, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0039328, 0x6347d276, 0xbfcfffff, 0xfffffff4, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfcfffff, 0xfffffff4, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc001f6dc, 0x3e631130, 0xbfcfffff, 0xfffffff4, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc000e3c5, 0x1fa059c4, 0xbfcfffff, 0xfffffff4, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xbfff3889, 0x2f1e0c86, 0xbfcfffff, 0xfffffff4, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffc4a83, 0x936311d6, 0xbfcfffff, 0xfffffff4, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d13, 0xbfcfffff, 0xfffffff4, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff5f973, 0x15254850, 0xbfcfffff, 0xfffffff4, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff30b6d, 0x796a4da1, 0xbfcfffff, 0xfffffff4, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbff07c6c, 0x6947a6a1, 0xbfcfffff, 0xfffffff4, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfecac7c, 0x57846f91, 0xbfcfffff, 0xfffffff4, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d0c, 0xbfcfffff, 0xfffffff4, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfe63b4b, 0xc3f16a80, 0xbfcfffff, 0xfffffff4, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe3d915, 0x73350658, 0xbfcfffff, 0xfffffff4, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfe1e00b, 0xabdefeab, 0xbfcfffff, 0xfffffff4, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfe03a26, 0xa486e62a, 0xbfcfffff, 0xfffffff4, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb41, 0xbfcfffff, 0xfffffff4, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfdb4ddd, 0x66a37b33, 0xbfcfffff, 0xfffffff4, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfd94441, 0xf8f725fe, 0xbfcfffff, 0xfffffff4, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfd77fc6, 0xae0c8e55, 0xbfcfffff, 0xfffffff4, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfd5f41a, 0xaf7686b1, 0xbfcfffff, 0xfffffff4, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269ed6, 0xbfcfffff, 0xfffffff4, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfd36277, 0x3707ebc1, 0xbfcfffff, 0xfffffff4, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfd24eaa, 0xb4c991e4, 0xbfcfffff, 0xfffffff4, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfd15731, 0x754a1817, 0xbfcfffff, 0xfffffff4, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfd077fd, 0xe3124ea1, 0xbfcfffff, 0xfffffff4, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc0078db7, 0x34b4bab8, 0xbfc99999, 0x9999998e, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0077907, 0x8c2f83ec, 0xbfc99999, 0x9999998e, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0076225, 0xd32abdbd, 0xbfc99999, 0x9999998e, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc00748b5, 0x43f409e0, 0xbfc99999, 0x9999998e, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfc99999, 0x9999998e, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0070c44, 0x9f55a998, 0xbfc99999, 0x9999998e, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc006e806, 0x2854db5f, 0xbfc99999, 0x9999998e, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc006bea7, 0xebdbbf5d, 0xbfc99999, 0x9999998e, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfc99999, 0x9999998e, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc00657b2, 0xe092b036, 0xbfc99999, 0x9999998e, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc00616b4, 0x66d73d61, 0xbfc99999, 0x9999998e, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc005c975, 0x54f4b39f, 0xbfc99999, 0x9999998e, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfc99999, 0x9999998e, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc004fac5, 0x404fe6dc, 0xbfc99999, 0x9999998e, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29433, 0xbfc99999, 0x9999998e, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc003bc1c, 0xc0033274, 0xbfc99999, 0x9999998e, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfc99999, 0x9999998e, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc001b6e1, 0x92ebbe44, 0xbfc99999, 0x9999998e, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df5, 0xbfc99999, 0x9999998e, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffd0d6a, 0x1369bd2f, 0xbfc99999, 0x9999998e, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d11, 0xbfc99999, 0x9999998e, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff5368c, 0x951e9cf4, 0xbfc99999, 0x9999998e, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe3c, 0xbfc99999, 0x9999998e, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbfedac67, 0x0561bb3f, 0xbfc99999, 0x9999998e, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d09, 0xbfc99999, 0x9999998e, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfe5977a, 0x5103ea85, 0xbfc99999, 0x9999998e, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd606638a, 0xbfc99999, 0x9999998e, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfe09cd8, 0x4fd118e9, 0xbfc99999, 0x9999998e, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb3f, 0xbfc99999, 0x9999998e, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfdac42f, 0xfa7bcbbf, 0xbfc99999, 0x9999998e, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfd85a37, 0x6b677db1, 0xbfc99999, 0x9999998e, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfd65243, 0x9d8be709, 0xbfc99999, 0x9999998e, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269ed4, 0xbfc99999, 0x9999998e, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfd31a9b, 0x43436dd5, 0xbfc99999, 0x9999998e, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfd1cfa9, 0x5f7a8dc3, 0xbfc99999, 0x9999998e, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfd0adb5, 0xa7741bf9, 0xbfc99999, 0x9999998e, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfcf5b75, 0xf92c80ca, 0xbfc99999, 0x9999998e, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfcd9461, 0x05023378, 0xbfc99999, 0x9999998e, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfcbfd58, 0x1196f5af, 0xbfc99999, 0x9999998e, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfca8f3c, 0x814a92c5, 0xbfc99999, 0x9999998e, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc007f10e, 0x1dc6b049, 0xbfc33333, 0x33333328, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc007e142, 0xd82322eb, 0xbfc33333, 0x33333328, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc007cfc1, 0xdc00636b, 0xbfc33333, 0x33333328, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc007bc40, 0xca9216fe, 0xbfc33333, 0x33333328, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc007a663, 0x9f874769, 0xbfc33333, 0x33333328, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0078db7, 0x34b4bab8, 0xbfc33333, 0x33333328, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc00771a9, 0xa0af69de, 0xbfc33333, 0x33333328, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc007517f, 0x6a2ae180, 0xbfc33333, 0x33333328, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc0072c43, 0xf4b1650b, 0xbfc33333, 0x33333328, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc00700b2, 0x93276810, 0xbfc33333, 0x33333328, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc006cd14, 0x07805738, 0xbfc33333, 0x33333328, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593d, 0xbfc33333, 0x33333328, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0064338, 0x2c07913b, 0xbfc33333, 0x33333328, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc005e4c3, 0x6ca0118b, 0xbfc33333, 0x33333328, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5af, 0xbfc33333, 0x33333328, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc004cf33, 0xdec5e9e1, 0xbfc33333, 0x33333328, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc003fc17, 0x6b7a8560, 0xbfc33333, 0x33333328, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfc33333, 0x33333328, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xc0014538, 0x5fa3af70, 0xbfc33333, 0x33333328, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xbffe47df, 0x3d0dd4cb, 0xbfc33333, 0x33333328, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d0f, 0xbfc33333, 0x33333328, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff3fc17, 0x6b7a8555, 0xbfc33333, 0x33333328, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbfef730b, 0xd281f685, 0xbfc33333, 0x33333328, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442d05, 0xbfc33333, 0x33333328, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfe4978f, 0xa3269ed1, 0xbfc33333, 0x33333328, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfe14b1d, 0xd5f90cd4, 0xbfc33333, 0x33333328, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb39, 0xbfc33333, 0x33333328, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfd9e9bf, 0x3d20dc5e, 0xbfc33333, 0x33333328, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfd6f619, 0x41e4dee0, 0xbfc33333, 0x33333328, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269ed2, 0xbfc33333, 0x33333328, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfd2a73a, 0x661eaef8, 0xbfc33333, 0x33333328, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfd10a46, 0x08e6283d, 0xbfc33333, 0x33333328, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfcf5b75, 0xf92c80c6, 0xbfc33333, 0x33333328, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfcd07be, 0xa194b97b, 0xbfc33333, 0x33333328, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfcb051b, 0x394c3396, 0xbfc33333, 0x33333328, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfc94441, 0xf8f725f8, 0xbfc33333, 0x33333328, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfc7b97b, 0x4bce5af0, 0xbfc33333, 0x33333328, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfc65ba8, 0x9b21619a, 0xbfc33333, 0x33333328, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfc52397, 0x843c9acd, 0xbfc33333, 0x33333328, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfc40b87, 0xc210a2d5, 0xbfc33333, 0x33333328, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc00855dc, 0x402d16b7, 0xbfb99999, 0x99999983, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0084b31, 0x9bd4918d, 0xbfb99999, 0x99999983, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc0083f5b, 0x13741c78, 0xbfb99999, 0x99999983, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc0083224, 0x9ea440f7, 0xbfb99999, 0x99999983, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc008234d, 0x7f6ecb9e, 0xbfb99999, 0x99999983, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc0081284, 0x26c22f58, 0xbfb99999, 0x99999983, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc007ff60, 0x67fcc98b, 0xbfb99999, 0x99999983, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc007e95b, 0x1e3a76c5, 0xbfb99999, 0x99999983, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc007cfc1, 0xdc00636b, 0xbfb99999, 0x99999983, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc007b1a4, 0x4c26bccb, 0xbfb99999, 0x99999983, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc0078db7, 0x34b4bab9, 0xbfb99999, 0x99999983, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0076225, 0xd32abdbd, 0xbfb99999, 0x99999983, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc0072c43, 0xf4b1650c, 0xbfb99999, 0x99999983, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc006e806, 0x2854db60, 0xbfb99999, 0x99999983, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593e, 0xbfb99999, 0x99999983, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc00616b4, 0x66d73d62, 0xbfb99999, 0x99999983, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5b0, 0xbfb99999, 0x99999983, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc0046dc0, 0x9ec29434, 0xbfb99999, 0x99999983, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfb99999, 0x99999983, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xc000468a, 0x8ace4df4, 0xbfb99999, 0x99999983, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442d0a, 0xbfb99999, 0x99999983, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbff1b6e1, 0x92ebbe33, 0xbfb99999, 0x99999983, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442cfc, 0xbfb99999, 0x99999983, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbfe2d0ea, 0xd606637f, 0xbfb99999, 0x99999983, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb2c, 0xbfb99999, 0x99999983, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfd85a37, 0x6b677da4, 0xbfb99999, 0x99999983, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269eca, 0xbfb99999, 0x99999983, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfd1cfa9, 0x5f7a8dbc, 0xbfb99999, 0x99999983, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfcf5b75, 0xf92c80bc, 0xbfb99999, 0x99999983, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfcbfd58, 0x1196f5a4, 0xbfb99999, 0x99999983, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfc94441, 0xf8f725f1, 0xbfb99999, 0x99999983, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfc70570, 0x81d704ce, 0xbfb99999, 0x99999983, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfc52397, 0x843c9ac7, 0xbfb99999, 0x99999983, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfc38a03, 0x609b6530, 0xbfb99999, 0x99999983, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfc229ae, 0xc47638c9, 0xbfb99999, 0x99999983, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfc0f772, 0xd81fdbf8, 0xbfb99999, 0x99999983, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfbfd5ba, 0x9aac2f4b, 0xbfb99999, 0x99999983, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfbdfad6, 0xb3fd8429, 0xbfb99999, 0x99999983, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfbc5408, 0x1a021411, 0xbfb99999, 0x99999983, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfbad937, 0x0df3715e, 0xbfb99999, 0x99999983, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0xc008bbaa, 0xbde5e29c, 0xbfa99999, 0x9999996c, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0xc008b64a, 0xa934a2c3, 0xbfa99999, 0x9999996c, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0xc008b052, 0x20fc1e46, 0xbfa99999, 0x9999996c, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc008a9a6, 0x5b3c113d, 0xbfa99999, 0x9999996c, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0xc008a225, 0xe5677921, 0xbfa99999, 0x9999996c, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0xc00899a6, 0x70913360, 0xbfa99999, 0x9999996c, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0xc0088ff1, 0xae5a77dd, 0xbfa99999, 0x9999996c, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0xc00884c0, 0xbf72214b, 0xbfa99999, 0x9999996c, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0xc00877b5, 0x6104e567, 0xbfa99999, 0x9999996c, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0xc008684f, 0x702f7c76, 0xbfa99999, 0x9999996c, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0xc00855dc, 0x402d16b7, 0xbfa99999, 0x9999996c, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0xc0083f5b, 0x13741c78, 0xbfa99999, 0x9999996c, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0xc008234d, 0x7f6ecb9e, 0xbfa99999, 0x9999996c, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0xc007ff60, 0x67fcc98c, 0xbfa99999, 0x9999996c, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0xc007cfc1, 0xdc00636c, 0xbfa99999, 0x9999996c, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0xc0078db7, 0x34b4baba, 0xbfa99999, 0x9999996c, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0xc0072c43, 0xf4b1650d, 0xbfa99999, 0x9999996c, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0xc0068f09, 0x5fdf593f, 0xbfa99999, 0x9999996c, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0xc0056c6e, 0x7397f5b1, 0xbfa99999, 0x9999996c, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0xc002d97c, 0x7f3321d2, 0xbfa99999, 0x9999996c, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0xbff921fb, 0x54442cfc, 0xbfa99999, 0x9999996c, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0xbfe921fb, 0x54442cdf, 0xbfa99999, 0x9999996c, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0xbfddac67, 0x0561bb0b, 0xbfa99999, 0x9999996c, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0xbfd4978f, 0xa3269eb3, 0xbfa99999, 0x9999996c, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0xbfcf5b75, 0xf92c809a, 0xbfa99999, 0x9999996c, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0xbfc94441, 0xf8f725d6, 0xbfa99999, 0x9999996c, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0xbfc52397, 0x843c9ab2, 0xbfa99999, 0x9999996c, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0xbfc229ae, 0xc47638b8, 0xbfa99999, 0x9999996c, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0xbfbfd5ba, 0x9aac2f2f, 0xbfa99999, 0x9999996c, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfbc5408, 0x1a0213f9, 0xbfa99999, 0x9999996c, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0xbfb983e2, 0x82e2cc1a, 0xbfa99999, 0x9999996c, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0xbfb7357c, 0x82961441, 0xbfa99999, 0x9999996c, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfb548be, 0x67e8f615, 0xbfa99999, 0x9999996c, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0xbfb3a752, 0x9a4179a3, 0xbfa99999, 0x9999996c, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfb24134, 0xbd36a760, 0xbfa99999, 0x9999996c, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfb10a9c, 0x765f3702, 0xbfa99999, 0x9999996c, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0xbfaff55b, 0xb72cfdaa, 0xbfa99999, 0x9999996c, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0xbfae153e, 0x4206f6b9, 0xbfa99999, 0x9999996c, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0xbfac6a4c, 0xd203b483, 0xbfa99999, 0x9999996c, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0xbfaaec2a, 0xc3e29569, 0xbfa99999, 0x9999996c, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d17, 0x3cb70000, 0x00000000, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d16, 0x3cb70000, 0x00000000, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d15, 0x3cb70000, 0x00000000, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d15, 0x3cb70000, 0x00000000, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d13, 0x3cb70000, 0x00000000, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d11, 0x3cb70000, 0x00000000, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x400921fb, 0x54442d0a, 0x3cb70000, 0x00000000, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3cb70000, 0x00000000, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3cfcbfff, 0xffffffcc, 0x3cb70000, 0x00000000, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3cecbfff, 0xffffffe6, 0x3cb70000, 0x00000000, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ce32aaa, 0xaaaaaa9f, 0x3cb70000, 0x00000000, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3cdcbfff, 0xfffffff2, 0x3cb70000, 0x00000000, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3cd6ffff, 0xfffffff7, 0x3cb70000, 0x00000000, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3cd32aaa, 0xaaaaaaa5, 0x3cb70000, 0x00000000, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3cd06db6, 0xdb6db6d7, 0x3cb70000, 0x00000000, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3cccbfff, 0xfffffffa, 0x3cb70000, 0x00000000, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3cc98e38, 0xe38e38df, 0x3cb70000, 0x00000000, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3cc6ffff, 0xfffffffc, 0x3cb70000, 0x00000000, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3cc4e8ba, 0x2e8ba2e5, 0x3cb70000, 0x00000000, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3cc32aaa, 0xaaaaaaa7, 0x3cb70000, 0x00000000, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3cc1b13b, 0x13b13b10, 0x3cb70000, 0x00000000, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3cc06db6, 0xdb6db6d8, 0x3cb70000, 0x00000000, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3cbeaaaa, 0xaaaaaaa4, 0x3cb70000, 0x00000000, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3cbcbfff, 0xfffffffa, 0x3cb70000, 0x00000000, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3cbb0f0f, 0x0f0f0f09, 0x3cb70000, 0x00000000, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3cb98e38, 0xe38e38de, 0x3cb70000, 0x00000000, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3cb835e5, 0x0d794359, 0x3cb70000, 0x00000000, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4008bbaa, 0xbde5e29b, 0x3fa99999, 0x999999c8, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4008b64a, 0xa934a2c1, 0x3fa99999, 0x999999c8, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4008b052, 0x20fc1e45, 0x3fa99999, 0x999999c8, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4008a9a6, 0x5b3c113c, 0x3fa99999, 0x999999c8, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4008a225, 0xe5677920, 0x3fa99999, 0x999999c8, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x400899a6, 0x7091335e, 0x3fa99999, 0x999999c8, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40088ff1, 0xae5a77db, 0x3fa99999, 0x999999c8, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x400884c0, 0xbf722149, 0x3fa99999, 0x999999c8, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x400877b5, 0x6104e565, 0x3fa99999, 0x999999c8, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4008684f, 0x702f7c73, 0x3fa99999, 0x999999c8, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x400855dc, 0x402d16b4, 0x3fa99999, 0x999999c8, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40083f5b, 0x13741c75, 0x3fa99999, 0x999999c8, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4008234d, 0x7f6ecb9b, 0x3fa99999, 0x999999c8, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4007ff60, 0x67fcc988, 0x3fa99999, 0x999999c8, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4007cfc1, 0xdc006368, 0x3fa99999, 0x999999c8, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x40078db7, 0x34b4bab4, 0x3fa99999, 0x999999c8, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x40072c43, 0xf4b16506, 0x3fa99999, 0x999999c8, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf5936, 0x3fa99999, 0x999999c8, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5a6, 0x3fa99999, 0x999999c8, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321c4, 0x3fa99999, 0x999999c8, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442cfc, 0x3fa99999, 0x999999c8, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fa99999, 0x999999c8, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb66, 0x3fa99999, 0x999999c8, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269ef8, 0x3fa99999, 0x999999c8, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fcf5b75, 0xf92c8105, 0x3fa99999, 0x999999c8, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fc94441, 0xf8f7262e, 0x3fa99999, 0x999999c8, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fc52397, 0x843c9afd, 0x3fa99999, 0x999999c8, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fc229ae, 0xc47638f9, 0x3fa99999, 0x999999c8, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fbfd5ba, 0x9aac2fa1, 0x3fa99999, 0x999999c8, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fbc5408, 0x1a02145e, 0x3fa99999, 0x999999c8, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fb983e2, 0x82e2cc75, 0x3fa99999, 0x999999c8, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fb7357c, 0x82961494, 0x3fa99999, 0x999999c8, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fb548be, 0x67e8f661, 0x3fa99999, 0x999999c8, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fb3a752, 0x9a4179e9, 0x3fa99999, 0x999999c8, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fb24134, 0xbd36a7a2, 0x3fa99999, 0x999999c8, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fb10a9c, 0x765f373f, 0x3fa99999, 0x999999c8, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3faff55b, 0xb72cfe1e, 0x3fa99999, 0x999999c8, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fae153e, 0x4206f724, 0x3fa99999, 0x999999c8, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fac6a4c, 0xd203b4e9, 0x3fa99999, 0x999999c8, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3faaec2a, 0xc3e295c9, 0x3fa99999, 0x999999c8, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x400855dc, 0x402d16b5, 0x3fb99999, 0x999999b1, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40084b31, 0x9bd4918c, 0x3fb99999, 0x999999b1, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40083f5b, 0x13741c76, 0x3fb99999, 0x999999b1, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40083224, 0x9ea440f5, 0x3fb99999, 0x999999b1, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4008234d, 0x7f6ecb9c, 0x3fb99999, 0x999999b1, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40081284, 0x26c22f56, 0x3fb99999, 0x999999b1, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4007ff60, 0x67fcc989, 0x3fb99999, 0x999999b1, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4007e95b, 0x1e3a76c3, 0x3fb99999, 0x999999b1, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4007cfc1, 0xdc006369, 0x3fb99999, 0x999999b1, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4007b1a4, 0x4c26bcc8, 0x3fb99999, 0x999999b1, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40078db7, 0x34b4bab6, 0x3fb99999, 0x999999b1, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40076225, 0xd32abdba, 0x3fb99999, 0x999999b1, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40072c43, 0xf4b16508, 0x3fb99999, 0x999999b1, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4006e806, 0x2854db5c, 0x3fb99999, 0x999999b1, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf5939, 0x3fb99999, 0x999999b1, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x400616b4, 0x66d73d5d, 0x3fb99999, 0x999999b1, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5aa, 0x3fb99999, 0x999999b1, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec2942e, 0x3fb99999, 0x999999b1, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321cb, 0x3fb99999, 0x999999b1, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4dee, 0x3fb99999, 0x999999b1, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d0a, 0x3fb99999, 0x999999b1, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe3f, 0x3fb99999, 0x999999b1, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fb99999, 0x999999b1, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd606639a, 0x3fb99999, 0x999999b1, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb5b, 0x3fb99999, 0x999999b1, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fd85a37, 0x6b677dcb, 0x3fb99999, 0x999999b1, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269eed, 0x3fb99999, 0x999999b1, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fd1cfa9, 0x5f7a8dd9, 0x3fb99999, 0x999999b1, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fcf5b75, 0xf92c80f2, 0x3fb99999, 0x999999b1, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fcbfd58, 0x1196f5d5, 0x3fb99999, 0x999999b1, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fc94441, 0xf8f7261d, 0x3fb99999, 0x999999b1, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fc70570, 0x81d704f6, 0x3fb99999, 0x999999b1, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fc52397, 0x843c9aed, 0x3fb99999, 0x999999b1, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fc38a03, 0x609b6553, 0x3fb99999, 0x999999b1, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fc229ae, 0xc47638e9, 0x3fb99999, 0x999999b1, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fc0f772, 0xd81fdc17, 0x3fb99999, 0x999999b1, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fbfd5ba, 0x9aac2f83, 0x3fb99999, 0x999999b1, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fbdfad6, 0xb3fd845e, 0x3fb99999, 0x999999b1, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fbc5408, 0x1a021443, 0x3fb99999, 0x999999b1, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fbad937, 0x0df3718e, 0x3fb99999, 0x999999b1, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4007f10e, 0x1dc6b047, 0x3fc33333, 0x3333333f, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4007e142, 0xd82322e9, 0x3fc33333, 0x3333333f, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4007cfc1, 0xdc00636a, 0x3fc33333, 0x3333333f, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4007bc40, 0xca9216fd, 0x3fc33333, 0x3333333f, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4007a663, 0x9f874767, 0x3fc33333, 0x3333333f, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40078db7, 0x34b4bab6, 0x3fc33333, 0x3333333f, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x400771a9, 0xa0af69dc, 0x3fc33333, 0x3333333f, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4007517f, 0x6a2ae17e, 0x3fc33333, 0x3333333f, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40072c43, 0xf4b16509, 0x3fc33333, 0x3333333f, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x400700b2, 0x9327680d, 0x3fc33333, 0x3333333f, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4006cd14, 0x07805736, 0x3fc33333, 0x3333333f, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf593a, 0x3fc33333, 0x3333333f, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40064338, 0x2c079138, 0x3fc33333, 0x3333333f, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4005e4c3, 0x6ca01188, 0x3fc33333, 0x3333333f, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ab, 0x3fc33333, 0x3333333f, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x4004cf33, 0xdec5e9dc, 0x3fc33333, 0x3333333f, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x4003fc17, 0x6b7a855c, 0x3fc33333, 0x3333333f, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321ce, 0x3fc33333, 0x3333333f, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af6c, 0x3fc33333, 0x3333333f, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4c5, 0x3fc33333, 0x3333333f, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d0f, 0x3fc33333, 0x3333333f, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855a, 0x3fc33333, 0x3333333f, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f697, 0x3fc33333, 0x3333333f, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fc33333, 0x3333333f, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fe4978f, 0xa3269ee3, 0x3fc33333, 0x3333333f, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce4, 0x3fc33333, 0x3333333f, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb57, 0x3fc33333, 0x3333333f, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fd9e9bf, 0x3d20dc79, 0x3fc33333, 0x3333333f, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fd6f619, 0x41e4def9, 0x3fc33333, 0x3333333f, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269eea, 0x3fc33333, 0x3333333f, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fd2a73a, 0x661eaf0d, 0x3fc33333, 0x3333333f, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fd10a46, 0x08e62851, 0x3fc33333, 0x3333333f, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fcf5b75, 0xf92c80eb, 0x3fc33333, 0x3333333f, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fcd07be, 0xa194b99d, 0x3fc33333, 0x3333333f, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fcb051b, 0x394c33b5, 0x3fc33333, 0x3333333f, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fc94441, 0xf8f72615, 0x3fc33333, 0x3333333f, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fc7b97b, 0x4bce5b0c, 0x3fc33333, 0x3333333f, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fc65ba8, 0x9b2161b4, 0x3fc33333, 0x3333333f, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fc52397, 0x843c9ae6, 0x3fc33333, 0x3333333f, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fc40b87, 0xc210a2ec, 0x3fc33333, 0x3333333f, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40078db7, 0x34b4bab7, 0x3fc99999, 0x999999a6, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40077907, 0x8c2f83ea, 0x3fc99999, 0x999999a6, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40076225, 0xd32abdbb, 0x3fc99999, 0x999999a6, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x400748b5, 0x43f409df, 0x3fc99999, 0x999999a6, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40072c43, 0xf4b16509, 0x3fc99999, 0x999999a6, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40070c44, 0x9f55a997, 0x3fc99999, 0x999999a6, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4006e806, 0x2854db5d, 0x3fc99999, 0x999999a6, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4006bea7, 0xebdbbf5b, 0x3fc99999, 0x999999a6, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fc99999, 0x999999a6, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x400657b2, 0xe092b034, 0x3fc99999, 0x999999a6, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x400616b4, 0x66d73d5e, 0x3fc99999, 0x999999a6, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4005c975, 0x54f4b39c, 0x3fc99999, 0x999999a6, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ac, 0x3fc99999, 0x999999a6, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4004fac5, 0x404fe6d9, 0x3fc99999, 0x999999a6, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec29430, 0x3fc99999, 0x999999a6, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x4003bc1c, 0xc0033270, 0x3fc99999, 0x999999a6, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321ce, 0x3fc99999, 0x999999a6, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x4001b6e1, 0x92ebbe40, 0x3fc99999, 0x999999a6, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df2, 0x3fc99999, 0x999999a6, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd2c, 0x3fc99999, 0x999999a6, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d11, 0x3fc99999, 0x999999a6, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff5368c, 0x951e9cf8, 0x3fc99999, 0x999999a6, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe42, 0x3fc99999, 0x999999a6, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3fedac67, 0x0561bb4e, 0x3fc99999, 0x999999a6, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fc99999, 0x999999a6, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fe5977a, 0x5103ea94, 0x3fc99999, 0x999999a6, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd6066398, 0x3fc99999, 0x999999a6, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe09cd8, 0x4fd118f7, 0x3fc99999, 0x999999a6, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb56, 0x3fc99999, 0x999999a6, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fdac42f, 0xfa7bcbd6, 0x3fc99999, 0x999999a6, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fd85a37, 0x6b677dc6, 0x3fc99999, 0x999999a6, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fd65243, 0x9d8be71c, 0x3fc99999, 0x999999a6, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269ee6, 0x3fc99999, 0x999999a6, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fd31a9b, 0x43436de6, 0x3fc99999, 0x999999a6, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fd1cfa9, 0x5f7a8dd3, 0x3fc99999, 0x999999a6, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fd0adb5, 0xa7741c08, 0x3fc99999, 0x999999a6, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fcf5b75, 0xf92c80e5, 0x3fc99999, 0x999999a6, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fcd9461, 0x05023393, 0x3fc99999, 0x999999a6, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fcbfd58, 0x1196f5c9, 0x3fc99999, 0x999999a6, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fca8f3c, 0x814a92de, 0x3fc99999, 0x999999a6, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40072c43, 0xf4b1650a, 0x3fd00000, 0x00000006, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x400712fb, 0x97e1e342, 0x3fd00000, 0x00000006, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4006f715, 0x259aea13, 0x3fd00000, 0x00000006, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4006d825, 0xfdaafada, 0x3fd00000, 0x00000006, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4006b5ac, 0x6d632f9e, 0x3fd00000, 0x00000006, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fd00000, 0x00000006, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40066377, 0xfe555c40, 0x3fd00000, 0x00000006, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40063202, 0x7e829b4b, 0x3fd00000, 0x00000006, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4005f973, 0x15254855, 0x3fd00000, 0x00000006, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4005b83f, 0xa76fbdae, 0x3fd00000, 0x00000006, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ac, 0x3fd00000, 0x00000006, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40051371, 0xab22738a, 0x3fd00000, 0x00000006, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4004a9f8, 0x694c6d69, 0x3fd00000, 0x00000006, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x40042bb5, 0xf776eb7e, 0x3fd00000, 0x00000006, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40039328, 0x6347d273, 0x3fd00000, 0x00000006, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321cf, 0x3fd00000, 0x00000006, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x4001f6dc, 0x3e63112d, 0x3fd00000, 0x00000006, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x4000e3c5, 0x1fa059c1, 0x3fd00000, 0x00000006, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3fff3889, 0x2f1e0c82, 0x3fd00000, 0x00000006, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffc4a83, 0x936311d4, 0x3fd00000, 0x00000006, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d13, 0x3fd00000, 0x00000006, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff5f973, 0x15254852, 0x3fd00000, 0x00000006, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff30b6d, 0x796a4da5, 0x3fd00000, 0x00000006, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a6, 0x3fd00000, 0x00000006, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fecac7c, 0x57846f9d, 0x3fd00000, 0x00000006, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd00000, 0x00000006, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8c, 0x3fd00000, 0x00000006, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe3d915, 0x73350663, 0x3fd00000, 0x00000006, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fe1e00b, 0xabdefeb6, 0x3fd00000, 0x00000006, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe03a26, 0xa486e634, 0x3fd00000, 0x00000006, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb54, 0x3fd00000, 0x00000006, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fdb4ddd, 0x66a37b45, 0x3fd00000, 0x00000006, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fd94441, 0xf8f7260f, 0x3fd00000, 0x00000006, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fd77fc6, 0xae0c8e66, 0x3fd00000, 0x00000006, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fd5f41a, 0xaf7686c0, 0x3fd00000, 0x00000006, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269ee4, 0x3fd00000, 0x00000006, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fd36277, 0x3707ebcf, 0x3fd00000, 0x00000006, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fd24eaa, 0xb4c991f1, 0x3fd00000, 0x00000006, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fd15731, 0x754a1824, 0x3fd00000, 0x00000006, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fd077fd, 0xe3124ead, 0x3fd00000, 0x00000006, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4006cd14, 0x07805737, 0x3fd33333, 0x33333339, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4006af8a, 0xb51a6804, 0x3fd33333, 0x33333339, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40068f09, 0x5fdf593b, 0x3fd33333, 0x33333339, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40066b1c, 0x486d5729, 0x3fd33333, 0x33333339, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40064338, 0x2c079139, 0x3fd33333, 0x33333339, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x400616b4, 0x66d73d5f, 0x3fd33333, 0x33333339, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4005e4c3, 0x6ca01189, 0x3fd33333, 0x33333339, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4005ac69, 0x1f0f4899, 0x3fd33333, 0x33333339, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ad, 0x3fd33333, 0x33333339, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40052351, 0xd5cc540e, 0x3fd33333, 0x33333339, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4004cf33, 0xdec5e9de, 0x3fd33333, 0x33333339, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec29431, 0x3fd33333, 0x33333339, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4003fc17, 0x6b7a855e, 0x3fd33333, 0x33333339, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x400376b7, 0x14052d9e, 0x3fd33333, 0x33333339, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd33333, 0x33333339, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x40021fd0, 0x9b1e712c, 0x3fd33333, 0x33333339, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af6f, 0x3fd33333, 0x33333339, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fd33333, 0x33333339, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4cb, 0x3fd33333, 0x33333339, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffbc66e, 0x44cbc06f, 0x3fd33333, 0x33333339, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d13, 0x3fd33333, 0x33333339, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff67d88, 0x63bc99b9, 0x3fd33333, 0x33333339, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855d, 0x3fd33333, 0x33333339, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe42, 0x3fd33333, 0x33333339, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f699, 0x3fd33333, 0x33333339, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fec08aa, 0xe496efa5, 0x3fd33333, 0x33333339, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd33333, 0x33333339, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe6ad11, 0x00fbfde0, 0x3fd33333, 0x33333339, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fe4978f, 0xa3269ee2, 0x3fd33333, 0x33333339, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd6066397, 0x3fd33333, 0x33333339, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce2, 0x3fd33333, 0x33333339, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fdff54b, 0xf3bec845, 0x3fd33333, 0x33333339, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb53, 0x3fd33333, 0x33333339, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fdbac91, 0xa9a723ef, 0x3fd33333, 0x33333339, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fd9e9bf, 0x3d20dc73, 0x3fd33333, 0x33333339, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fd85a37, 0x6b677dc2, 0x3fd33333, 0x33333339, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fd6f619, 0x41e4def2, 0x3fd33333, 0x33333339, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fd5b6f8, 0x5eb6af76, 0x3fd33333, 0x33333339, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fd4978f, 0xa3269ee3, 0x3fd33333, 0x33333339, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fd39384, 0xf94e28a1, 0x3fd33333, 0x33333339, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40067078, 0xc2eef45d, 0x3fd66666, 0x6666666c, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40064f0e, 0xb468064f, 0x3fd66666, 0x6666666c, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40062a65, 0x7a259a4d, 0x3fd66666, 0x6666666c, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40060204, 0xbe520693, 0x3fd66666, 0x6666666c, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4005d55d, 0x7bcaa898, 0x3fd66666, 0x6666666c, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4005a3c4, 0xf2e49eb4, 0x3fd66666, 0x6666666c, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ad, 0x3fd66666, 0x6666666c, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40052e63, 0xcbf6f7b2, 0x3fd66666, 0x6666666c, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4004e87c, 0x3b956ba6, 0x3fd66666, 0x6666666c, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40049952, 0x004c912d, 0x3fd66666, 0x6666666c, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40043f37, 0x08e537eb, 0x3fd66666, 0x6666666c, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4003d82a, 0x5408834c, 0x3fd66666, 0x6666666c, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x400361d1, 0x62e61b89, 0x3fd66666, 0x6666666c, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd66666, 0x6666666c, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40023c41, 0xea611602, 0x3fd66666, 0x6666666c, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x40018743, 0x06ef5822, 0x3fd66666, 0x6666666c, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x4000b833, 0xbe165cc7, 0x3fd66666, 0x6666666c, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3fff9c6b, 0x238c6430, 0x3fd66666, 0x6666666c, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffd95e5, 0xac22d087, 0x3fd66666, 0x6666666c, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffb6731, 0x2cd2f430, 0x3fd66666, 0x6666666c, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d14, 0x3fd66666, 0x6666666c, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff6dcc5, 0x7bb565f9, 0x3fd66666, 0x6666666c, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff4ae10, 0xfc6589a2, 0x3fd66666, 0x6666666c, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff2a78b, 0x84fbf5fa, 0x3fd66666, 0x6666666c, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff0d38f, 0x2c5ba09d, 0x3fd66666, 0x6666666c, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3fee6ae1, 0x355353ce, 0x3fd66666, 0x6666666c, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3feb96e5, 0xa78c5c51, 0x3fd66666, 0x6666666c, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd66666, 0x6666666c, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fe700a7, 0xc5784634, 0x3fd66666, 0x6666666c, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe52744, 0x00eea72c, 0x3fd66666, 0x6666666c, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fe38b11, 0x2d7bd4af, 0x3fd66666, 0x6666666c, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe222a5, 0x4fde6fa9, 0x3fd66666, 0x6666666c, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe0e5fc, 0x62bb05c4, 0x3fd66666, 0x6666666c, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fdf9cbc, 0x4269ab2c, 0x3fd66666, 0x6666666c, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb51, 0x3fd66666, 0x6666666c, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fdbf1b3, 0x0afc731c, 0x3fd66666, 0x6666666c, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fda64ee, 0xc3cc23fe, 0x3fd66666, 0x6666666c, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fd8ffb4, 0xaf913426, 0x3fd66666, 0x6666666c, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fd7bcae, 0xd0f49656, 0x3fd66666, 0x6666666c, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fd69764, 0xfee13644, 0x3fd66666, 0x6666666c, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x400616b4, 0x66d73d60, 0x3fd99999, 0x9999999f, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4005f1ce, 0xcb0d4d6d, 0x3fd99999, 0x9999999f, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4005c975, 0x54f4b39e, 0x3fd99999, 0x9999999f, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40059d2f, 0x241f85a6, 0x3fd99999, 0x9999999f, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fd99999, 0x9999999f, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4005368c, 0x951e9cfc, 0x3fd99999, 0x9999999f, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4004fac5, 0x404fe6da, 0x3fd99999, 0x9999999f, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4004b831, 0x3ddf1776, 0x3fd99999, 0x9999999f, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fd99999, 0x9999999f, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40041a34, 0xfb542bff, 0x3fd99999, 0x9999999f, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4003bc1c, 0xc0033272, 0x3fd99999, 0x9999999f, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x400351d1, 0x783b3dac, 0x3fd99999, 0x9999999f, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fd99999, 0x9999999f, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x40025127, 0x9b802817, 0x3fd99999, 0x9999999f, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4001b6e1, 0x92ebbe42, 0x3fd99999, 0x9999999f, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x40010900, 0x9519d637, 0x3fd99999, 0x9999999f, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fd99999, 0x9999999f, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffedf81, 0xa4bd64d1, 0x3fd99999, 0x9999999f, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd30, 0x3fd99999, 0x9999999f, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffb1f56, 0xfdeef00c, 0x3fd99999, 0x9999999f, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fd99999, 0x9999999f, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff7249f, 0xaa996a1e, 0x3fd99999, 0x9999999f, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff5368c, 0x951e9cfa, 0x3fd99999, 0x9999999f, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff36475, 0x03caf55a, 0x3fd99999, 0x9999999f, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe43, 0x3fd99999, 0x9999999f, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff031f5, 0x7e54adbd, 0x3fd99999, 0x9999999f, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fedac67, 0x0561bb4e, 0x3fd99999, 0x9999999f, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3feb434e, 0xe31013fc, 0x3fd99999, 0x9999999f, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fd99999, 0x9999999f, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe740a7, 0x7023bda9, 0x3fd99999, 0x9999999f, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fe5977a, 0x5103ea93, 0x3fd99999, 0x9999999f, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe41f19, 0x63c0045f, 0x3fd99999, 0x9999999f, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd6066396, 0x3fd99999, 0x9999999f, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe1a728, 0x59945683, 0x3fd99999, 0x9999999f, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe09cd8, 0x4fd118f3, 0x3fd99999, 0x9999999f, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fdf5b75, 0xf92c80dd, 0x3fd99999, 0x9999999f, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb4f, 0x3fd99999, 0x9999999f, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fdc2661, 0x81253b88, 0x3fd99999, 0x9999999f, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fdac42f, 0xfa7bcbce, 0x3fd99999, 0x9999999f, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fd98164, 0x49b6fd53, 0x3fd99999, 0x9999999f, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4005bffa, 0x17065de0, 0x3fdccccc, 0xccccccd2, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x400597ff, 0xd521f2a9, 0x3fdccccc, 0xccccccd2, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fdccccc, 0xccccccd2, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40053ccf, 0xe79b8f8e, 0x3fdccccc, 0xccccccd2, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4005089b, 0xaf0d60e4, 0x3fdccccc, 0xccccccd2, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4004cf33, 0xdec5e9df, 0x3fdccccc, 0xccccccd2, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40048fe1, 0xf1cd429f, 0x3fdccccc, 0xccccccd2, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x400449d3, 0x87509220, 0x3fdccccc, 0xccccccd2, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fdccccc, 0xccccccd2, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4003a59b, 0x934a3833, 0x3fdccccc, 0xccccccd2, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4003452d, 0x2a42ac27, 0x3fdccccc, 0xccccccd2, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fdccccc, 0xccccccd2, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40026127, 0x862b05f4, 0x3fdccccc, 0xccccccd2, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4001dace, 0xaa5dc055, 0x3fdccccc, 0xccccccd2, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fdccccc, 0xccccccd2, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x40009f87, 0x5343d016, 0x3fdccccc, 0xccccccd2, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3fffd307, 0x52e32009, 0x3fdccccc, 0xccccccd2, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4cd, 0x3fdccccc, 0xccccccd2, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffca1a6, 0x56770bcd, 0x3fdccccc, 0xccccccd2, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffae73b, 0xd5e44e58, 0x3fdccccc, 0xccccccd2, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fdccccc, 0xccccccd2, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff75cba, 0xd2a40bd2, 0x3fdccccc, 0xccccccd2, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff5a250, 0x52114e5e, 0x3fdccccc, 0xccccccd2, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855e, 0x3fdccccc, 0xccccccd2, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff270ef, 0x55a53a23, 0x3fdccccc, 0xccccccd2, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff104e8, 0x0200b9fe, 0x3fdccccc, 0xccccccd2, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f699, 0x3fdccccc, 0xccccccd2, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3fed1cb2, 0xa799b305, 0x3fdccccc, 0xccccccd2, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3feb034f, 0x38649c87, 0x3fdccccc, 0xccccccd2, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fdccccc, 0xccccccd2, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fe77338, 0xa80603be, 0x3fdccccc, 0xccccccd2, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe5f17f, 0x03e7d38e, 0x3fdccccc, 0xccccccd2, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe4978f, 0xa3269ee1, 0x3fdccccc, 0xccccccd2, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe3609f, 0x33ce6bdf, 0x3fdccccc, 0xccccccd2, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe24865, 0x89dba9df, 0x3fdccccc, 0xccccccd2, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe14b1d, 0xd5f90ce1, 0x3fdccccc, 0xccccccd2, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe0657e, 0x94db30cf, 0x3fdccccc, 0xccccccd2, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fdf295b, 0x6544ec4e, 0x3fdccccc, 0xccccccd2, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fddac67, 0x0561bb4f, 0x3fdccccc, 0xccccccd2, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fdc4fdb, 0xf911d373, 0x3fdccccc, 0xccccccd2, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40056c6e, 0x7397f5ae, 0x3fe00000, 0x00000003, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x400541c5, 0x5d5d64c0, 0x3fe00000, 0x00000003, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40051371, 0xab22738b, 0x3fe00000, 0x00000003, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4004e102, 0xc80931db, 0x3fe00000, 0x00000003, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4004a9f8, 0x694c6d6a, 0x3fe00000, 0x00000003, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fe00000, 0x00000003, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40042bb5, 0xf776eb7f, 0x3fe00000, 0x00000003, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4003e31d, 0xfb0d799c, 0x3fe00000, 0x00000003, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40039328, 0x6347d274, 0x3fe00000, 0x00000003, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40033aef, 0xbf36777e, 0x3fe00000, 0x00000003, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d0, 0x3fe00000, 0x00000003, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40026dcb, 0xd423977a, 0x3fe00000, 0x00000003, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4001f6dc, 0x3e63112f, 0x3fe00000, 0x00000003, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x400173c1, 0xf5810bb6, 0x3fe00000, 0x00000003, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4000e3c5, 0x1fa059c3, 0x3fe00000, 0x00000003, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe00000, 0x00000003, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3fff3889, 0x2f1e0c85, 0x3fe00000, 0x00000003, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffdcbc9, 0xedcbd8d7, 0x3fe00000, 0x00000003, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffc4a83, 0x936311d7, 0x3fe00000, 0x00000003, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffaba39, 0x7c7259da, 0x3fe00000, 0x00000003, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d15, 0x3fe00000, 0x00000003, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff789bd, 0x2c160051, 0x3fe00000, 0x00000003, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff5f973, 0x15254855, 0x3fe00000, 0x00000003, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff4782c, 0xbabc8155, 0x3fe00000, 0x00000003, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff30b6d, 0x796a4da7, 0x3fe00000, 0x00000003, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe43, 0x3fe00000, 0x00000003, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a7, 0x3fe00000, 0x00000003, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3feeb8e5, 0x7b0c8582, 0x3fe00000, 0x00000003, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fecac7c, 0x57846f9e, 0x3fe00000, 0x00000003, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fead0be, 0x00825672, 0x3fe00000, 0x00000003, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe00000, 0x00000003, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe79c2e, 0x5436d664, 0x3fe00000, 0x00000003, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8a, 0x3fe00000, 0x00000003, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe4fb75, 0x64dacded, 0x3fe00000, 0x00000003, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe3d915, 0x73350660, 0x3fe00000, 0x00000003, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd6066395, 0x3fe00000, 0x00000003, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe1e00b, 0xabdefeb4, 0x3fe00000, 0x00000003, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe103e2, 0x30ebecf2, 0x3fe00000, 0x00000003, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe03a26, 0xa486e631, 0x3fe00000, 0x00000003, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fdf01af, 0xb73642bd, 0x3fe00000, 0x00000003, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40051c28, 0xaaf491df, 0x3fe19999, 0x9999999d, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4004ef33, 0x3421a552, 0x3fe19999, 0x9999999d, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4004be8d, 0x75c60da2, 0x3fe19999, 0x9999999d, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x400489ce, 0x32c7e50c, 0x3fe19999, 0x9999999d, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4004507f, 0x4d109f28, 0x3fe19999, 0x9999999d, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4004121c, 0xb53cd826, 0x3fe19999, 0x9999999d, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4003ce13, 0xa64eb185, 0x3fe19999, 0x9999999d, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x400383c2, 0x72726983, 0x3fe19999, 0x9999999d, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40033279, 0x47a8a3f3, 0x3fe19999, 0x9999999d, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe19999, 0x9999999d, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40027809, 0x3f2fcc24, 0x3fe19999, 0x9999999d, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40020d5d, 0x6b1c0b6e, 0x3fe19999, 0x9999999d, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x400198c4, 0x031217a2, 0x3fe19999, 0x9999999d, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x400119a6, 0xfe19b274, 0x3fe19999, 0x9999999d, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x40008fa7, 0x2899ef93, 0x3fe19999, 0x9999999d, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffff572, 0xaded0be5, 0x3fe19999, 0x9999999d, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffeb68c, 0x3ba726db, 0x3fe19999, 0x9999999d, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffd648c, 0xd67db728, 0x3fe19999, 0x9999999d, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffc02a9, 0x647f0db2, 0x3fe19999, 0x9999999d, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa9553, 0x1c6d8e5d, 0x3fe19999, 0x9999999d, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe19999, 0x9999999d, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff7aea3, 0x8c1acbcf, 0x3fe19999, 0x9999999d, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff6414d, 0x44094c7a, 0x3fe19999, 0x9999999d, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff4df69, 0xd20aa304, 0x3fe19999, 0x9999999d, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff38d6a, 0x6ce13351, 0x3fe19999, 0x9999999d, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff24e83, 0xfa9b4e47, 0x3fe19999, 0x9999999d, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff124a8, 0x57547b07, 0x3fe19999, 0x9999999d, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff010a8, 0xac54f544, 0x3fe19999, 0x9999999d, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fee24dd, 0x44c855d1, 0x3fe19999, 0x9999999d, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fec5277, 0xa4a086a2, 0x3fe19999, 0x9999999d, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3feaa7c8, 0x545183cd, 0x3fe19999, 0x9999999d, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe19999, 0x9999999d, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe7be08, 0x326e248f, 0x3fe19999, 0x9999999d, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe678e3, 0x87470e50, 0x3fe19999, 0x9999999d, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe54f9e, 0xb7d5ee49, 0x3fe19999, 0x9999999d, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe43f7a, 0x7c1d53c7, 0x3fe19999, 0x9999999d, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe345f0, 0x1cce37bb, 0x3fe19999, 0x9999999d, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe260b4, 0x85f1202d, 0x3fe19999, 0x9999999d, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe18db7, 0x79f87dd4, 0x3fe19999, 0x9999999d, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe0cb20, 0x808a1f16, 0x3fe19999, 0x9999999d, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4004cf33, 0xdec5e9df, 0x3fe33333, 0x33333337, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4004a04f, 0x5f80df4b, 0x3fe33333, 0x33333337, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40046dc0, 0x9ec29432, 0x3fe33333, 0x33333337, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40043726, 0xeb5fa0c2, 0x3fe33333, 0x33333337, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fe33333, 0x33333337, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4003bc1c, 0xc0033272, 0x3fe33333, 0x33333337, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x400376b7, 0x14052d9f, 0x3fe33333, 0x33333337, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40032b5c, 0xd7c0fc06, 0x3fe33333, 0x33333337, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe33333, 0x33333337, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4002807f, 0xb6bd9fae, 0x3fe33333, 0x33333337, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40021fd0, 0x9b1e712d, 0x3fe33333, 0x33333337, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4001b6e1, 0x92ebbe43, 0x3fe33333, 0x33333337, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fe33333, 0x33333337, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4000ca7c, 0xc2d0d7fc, 0x3fe33333, 0x33333337, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe33333, 0x33333337, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3fff730b, 0xd281f698, 0x3fe33333, 0x33333337, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3fe33333, 0x33333337, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd31, 0x3fe33333, 0x33333337, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffbc66e, 0x44cbc072, 0x3fe33333, 0x33333337, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa7687, 0x3ac2bc7a, 0x3fe33333, 0x33333337, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe33333, 0x33333337, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff7cd6f, 0x6dc59db2, 0x3fe33333, 0x33333337, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff67d88, 0x63bc99bb, 0x3fe33333, 0x33333337, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff5368c, 0x951e9cfb, 0x3fe33333, 0x33333337, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855f, 0x3fe33333, 0x33333337, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff2d0ea, 0xd6066394, 0x3fe33333, 0x33333337, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe33333, 0x33333337, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff0aefd, 0x22e6aa36, 0x3fe33333, 0x33333337, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3fe33333, 0x33333337, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fedac67, 0x0561bb50, 0x3fe33333, 0x33333337, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fec08aa, 0xe496efa6, 0x3fe33333, 0x33333337, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fea85ee, 0x761a35a1, 0x3fe33333, 0x33333337, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe33333, 0x33333337, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe7da79, 0xf20cc443, 0x3fe33333, 0x33333337, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe6ad11, 0x00fbfddf, 0x3fe33333, 0x33333337, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe5977a, 0x5103ea92, 0x3fe33333, 0x33333337, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe4978f, 0xa3269ee1, 0x3fe33333, 0x33333337, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe3ab51, 0xa3923153, 0x3fe33333, 0x33333337, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe2d0ea, 0xd6066395, 0x3fe33333, 0x33333337, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe206af, 0xd30d3731, 0x3fe33333, 0x33333337, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40048590, 0xb7aedd62, 0x3fe4cccc, 0xccccccd1, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40045514, 0x33f00782, 0x3fe4cccc, 0xccccccd1, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x400420fd, 0x07447552, 0x3fe4cccc, 0xccccccd1, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4003e8f3, 0xacb51f92, 0x3fe4cccc, 0xccccccd1, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4003ac98, 0xf27e8651, 0x3fe4cccc, 0xccccccd1, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40036b86, 0x251cd70d, 0x3fe4cccc, 0xccccccd1, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4003254d, 0xb30ae9d3, 0x3fe4cccc, 0xccccccd1, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe4cccc, 0xccccccd1, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4002879c, 0x26a5479b, 0x3fe4cccc, 0xccccccd1, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40022f36, 0x8bf3da1f, 0x3fe4cccc, 0xccccccd1, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4001cfdb, 0x0358ca06, 0x3fe4cccc, 0xccccccd1, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40016925, 0x7715b182, 0x3fe4cccc, 0xccccccd1, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4000fac7, 0xc0872c2c, 0x3fe4cccc, 0xccccccd1, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x40008495, 0x326f4bf0, 0x3fe4cccc, 0xccccccd1, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x4000068f, 0xdf56fb08, 0x3fe4cccc, 0xccccccd1, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3fff01ec, 0xffc750ae, 0x3fe4cccc, 0xccccccd1, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffde8a2, 0x2515088e, 0x3fe4cccc, 0xccccccd1, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffcc2f3, 0x2876c448, 0x3fe4cccc, 0xccccccd1, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffb933b, 0xc05799bf, 0x3fe4cccc, 0xccccccd1, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa5c70, 0x7de844b3, 0x3fe4cccc, 0xccccccd1, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe4cccc, 0xccccccd1, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff7e786, 0x2aa0157a, 0x3fe4cccc, 0xccccccd1, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff6b0ba, 0xe830c06e, 0x3fe4cccc, 0xccccccd1, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff58103, 0x801195e5, 0x3fe4cccc, 0xccccccd1, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff45b54, 0x8373519f, 0x3fe4cccc, 0xccccccd1, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff34209, 0xa8c1097f, 0x3fe4cccc, 0xccccccd1, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff236d6, 0xe9da641d, 0x3fe4cccc, 0xccccccd1, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff13acc, 0x43a9c24d, 0x3fe4cccc, 0xccccccd1, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff04e67, 0x277a01d7, 0x3fe4cccc, 0xccccccd1, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3feee357, 0x74b9ee52, 0x3fe4cccc, 0xccccccd1, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fed4881, 0x43ad8c44, 0x3fe4cccc, 0xccccccd1, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3febcb13, 0x21414be0, 0x3fe4cccc, 0xccccccd1, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fea697c, 0xb67b95ed, 0x3fe4cccc, 0xccccccd1, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe4cccc, 0xccccccd1, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe7f2b6, 0x84e50d11, 0x3fe4cccc, 0xccccccd1, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe6d9d4, 0xbc9d5828, 0x3fe4cccc, 0xccccccd1, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe5d589, 0x87169b18, 0x3fe4cccc, 0xccccccd1, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe4e41e, 0x9e3c3615, 0x3fe4cccc, 0xccccccd1, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe403f9, 0x33fedf17, 0x3fe4cccc, 0xccccccd1, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe3339c, 0x81509658, 0x3fe4cccc, 0xccccccd1, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40043f37, 0x08e537ec, 0x3fe66666, 0x6666666b, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40040d72, 0x6e9f7ad4, 0x3fe66666, 0x6666666b, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4003d82a, 0x5408834d, 0x3fe66666, 0x6666666b, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40039f10, 0x8a1dc76f, 0x3fe66666, 0x6666666b, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x400361d1, 0x62e61b8a, 0x3fe66666, 0x6666666b, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40032014, 0x3b9f415f, 0x3fe66666, 0x6666666b, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe66666, 0x6666666b, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40028dab, 0x4b5b59cf, 0x3fe66666, 0x6666666b, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40023c41, 0xea611602, 0x3fe66666, 0x6666666b, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4001e4e5, 0x5817921d, 0x3fe66666, 0x6666666b, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40018743, 0x06ef5823, 0x3fe66666, 0x6666666b, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40012317, 0x0c990102, 0x3fe66666, 0x6666666b, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4000b833, 0xbe165cc8, 0x3fe66666, 0x6666666b, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe66666, 0x6666666b, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3fff9c6b, 0x238c6432, 0x3fe66666, 0x6666666b, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffe9f02, 0x0021cec5, 0x3fe66666, 0x6666666b, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffd95e5, 0xac22d08a, 0x3fe66666, 0x6666666b, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffc829e, 0xbb6db38b, 0x3fe66666, 0x6666666b, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffb6731, 0x2cd2f432, 0x3fe66666, 0x6666666b, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa460e, 0xa017978f, 0x3fe66666, 0x6666666b, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe66666, 0x6666666b, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff7fde8, 0x0870c29e, 0x3fe66666, 0x6666666b, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff6dcc5, 0x7bb565fb, 0x3fe66666, 0x6666666b, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff5c157, 0xed1aa6a2, 0x3fe66666, 0x6666666b, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff4ae10, 0xfc6589a3, 0x3fe66666, 0x6666666b, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff3a4f4, 0xa8668b68, 0x3fe66666, 0x6666666b, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff2a78b, 0x84fbf5fc, 0x3fe66666, 0x6666666b, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe66666, 0x6666666b, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff0d38f, 0x2c5ba09f, 0x3fe66666, 0x6666666b, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3feffb91, 0x1eacb051, 0x3fe66666, 0x6666666b, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fee6ae1, 0x355353d0, 0x3fe66666, 0x6666666b, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fecf457, 0xf0b26be7, 0x3fe66666, 0x6666666b, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3feb96e5, 0xa78c5c52, 0x3fe66666, 0x6666666b, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fea5140, 0x23a34d20, 0x3fe66666, 0x6666666b, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe66666, 0x6666666b, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe8079c, 0x6293aee0, 0x3fe66666, 0x6666666b, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe700a7, 0xc5784634, 0x3fe66666, 0x6666666b, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe60bab, 0x289996a1, 0x3fe66666, 0x6666666b, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe52744, 0x00eea72b, 0x3fe66666, 0x6666666b, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe45223, 0x9692c90f, 0x3fe66666, 0x6666666b, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4003fc17, 0x6b7a855f, 0x3fe80000, 0x00000005, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4003c953, 0x34d30df4, 0x3fe80000, 0x00000005, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x40039328, 0x6347d275, 0x3fe80000, 0x00000005, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40035951, 0xee0fd5c9, 0x3fe80000, 0x00000005, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40031b87, 0x267eca84, 0x3fe80000, 0x00000005, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe80000, 0x00000005, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x400292e4, 0xc2c70243, 0x3fe80000, 0x00000005, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40024772, 0xd9496c95, 0x3fe80000, 0x00000005, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4001f6dc, 0x3e63112f, 0x3fe80000, 0x00000005, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4001a0dc, 0x49296b7c, 0x3fe80000, 0x00000005, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3fe80000, 0x00000005, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4000e3c5, 0x1fa059c3, 0x3fe80000, 0x00000005, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x40007c6c, 0x6947a6a6, 0x3fe80000, 0x00000005, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x40000f34, 0x0b81a4ee, 0x3fe80000, 0x00000005, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3fff3889, 0x2f1e0c86, 0x3fe80000, 0x00000005, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3fe80000, 0x00000005, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffd4d68, 0xbe213417, 0x3fe80000, 0x00000005, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffc4a83, 0x936311d8, 0x3fe80000, 0x00000005, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffb40e9, 0xaf482898, 0x3fe80000, 0x00000005, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa32a5, 0x1baa2089, 0x3fe80000, 0x00000005, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe80000, 0x00000005, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff81151, 0x8cde39a4, 0x3fe80000, 0x00000005, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff7030c, 0xf9403195, 0x3fe80000, 0x00000005, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff5f973, 0x15254856, 0x3fe80000, 0x00000005, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff4f68d, 0xea672616, 0x3fe80000, 0x00000005, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a855f, 0x3fe80000, 0x00000005, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff30b6d, 0x796a4da8, 0x3fe80000, 0x00000005, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff2258e, 0x91851051, 0x3fe80000, 0x00000005, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff14b1d, 0xd5f90ce1, 0x3fe80000, 0x00000005, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3ff07c6c, 0x6947a6a8, 0x3fe80000, 0x00000005, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3fe80000, 0x00000005, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fee047c, 0x2c6b066a, 0x3fe80000, 0x00000005, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fecac7c, 0x57846f9e, 0x3fe80000, 0x00000005, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3feb6a21, 0xebeb0209, 0x3fe80000, 0x00000005, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fea3c5a, 0x45f4ab51, 0x3fe80000, 0x00000005, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe80000, 0x00000005, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe819d0, 0xb7158a4d, 0x3fe80000, 0x00000005, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe722a5, 0x98d15d3a, 0x3fe80000, 0x00000005, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe63b4b, 0xc3f16a8a, 0x3fe80000, 0x00000005, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe562a0, 0x7dc47c8f, 0x3fe80000, 0x00000005, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4003bc1c, 0xc0033273, 0x3fe99999, 0x9999999f, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40038899, 0xe572fe85, 0x3fe99999, 0x9999999f, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x400351d1, 0x783b3dad, 0x3fe99999, 0x9999999f, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40031787, 0x26d41fcc, 0x3fe99999, 0x9999999f, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fe99999, 0x9999999f, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40029771, 0xd7e7791e, 0x3fe99999, 0x9999999f, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x40025127, 0x9b802818, 0x3fe99999, 0x9999999f, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40020660, 0x0be7bd51, 0x3fe99999, 0x9999999f, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x4001b6e1, 0x92ebbe43, 0x3fe99999, 0x9999999f, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x40016279, 0xb155a47a, 0x3fe99999, 0x9999999f, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40010900, 0x9519d638, 0x3fe99999, 0x9999999f, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4000aa5d, 0x4f58e2bf, 0x3fe99999, 0x9999999f, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df4, 0x3fe99999, 0x9999999f, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x3fffbb37, 0x05373615, 0x3fe99999, 0x9999999f, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3ffedf81, 0xa4bd64d2, 0x3fe99999, 0x9999999f, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffdfa99, 0x22062809, 0x3fe99999, 0x9999999f, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffd0d6a, 0x1369bd32, 0x3fe99999, 0x9999999f, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffc192a, 0xbdbdf877, 0x3fe99999, 0x9999999f, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffb1f56, 0xfdeef00d, 0x3fe99999, 0x9999999f, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa21a6, 0x31fd9506, 0x3fe99999, 0x9999999f, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d16, 0x3fe99999, 0x9999999f, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff82250, 0x768ac527, 0x3fe99999, 0x9999999f, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff7249f, 0xaa996a20, 0x3fe99999, 0x9999999f, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff62acb, 0xeaca61b7, 0x3fe99999, 0x9999999f, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff5368c, 0x951e9cfc, 0x3fe99999, 0x9999999f, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff4495d, 0x86823225, 0x3fe99999, 0x9999999f, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff36475, 0x03caf55c, 0x3fe99999, 0x9999999f, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff288bf, 0xa3512419, 0x3fe99999, 0x9999999f, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe44, 0x3fe99999, 0x9999999f, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3ff0ef3c, 0x09d694b1, 0x3fe99999, 0x9999999f, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3ff031f5, 0x7e54adbe, 0x3fe99999, 0x9999999f, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3feefe06, 0x8bba2275, 0x3fe99999, 0x9999999f, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fedac67, 0x0561bb50, 0x3fe99999, 0x9999999f, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fec6e6d, 0x2171bf19, 0x3fe99999, 0x9999999f, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3feb434e, 0xe31013fc, 0x3fe99999, 0x9999999f, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fea2a25, 0xf172cfe4, 0x3fe99999, 0x9999999f, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fe99999, 0x9999999f, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe829d0, 0xb5c0352b, 0x3fe99999, 0x9999999f, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe740a7, 0x7023bda9, 0x3fe99999, 0x9999999f, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe66585, 0xbb44ba4a, 0x3fe99999, 0x9999999f, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40037f2d, 0x8b93012a, 0x3feb3333, 0x33333339, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x40034b25, 0xb27b30a4, 0x3feb3333, 0x33333339, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x400313fc, 0x14754e12, 0x3feb3333, 0x33333339, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3feb3333, 0x33333339, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40029b71, 0xd79223d6, 0x3feb3333, 0x33333339, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x400259a7, 0x10566dd9, 0x3feb3333, 0x33333339, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x400213e8, 0x74487c33, 0x3feb3333, 0x33333339, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x4001ca05, 0x51b12410, 0x3feb3333, 0x33333339, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40017bd2, 0x1306a2e0, 0x3feb3333, 0x33333339, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4001292a, 0xcb9e5e96, 0x3feb3333, 0x33333339, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x4000d1f6, 0x365d11c8, 0x3feb3333, 0x33333339, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40007629, 0x16cab415, 0x3feb3333, 0x33333339, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x400015c9, 0xda46bdfc, 0x3feb3333, 0x33333339, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x3fff61e8, 0x80287a1f, 0x3feb3333, 0x33333339, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3ffe8fb9, 0x6bf1d8f3, 0x3feb3333, 0x33333339, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffdb5a6, 0x01769192, 0x3feb3333, 0x33333339, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffcd487, 0x74e47388, 0x3feb3333, 0x33333339, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffbed70, 0x67a8594c, 0x3feb3333, 0x33333339, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffb01a8, 0xbf84055b, 0x3feb3333, 0x33333339, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa12a5, 0x465464cf, 0x3feb3333, 0x33333339, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3feb3333, 0x33333339, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff83151, 0x6233f55f, 0x3feb3333, 0x33333339, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff7424d, 0xe90454d2, 0x3feb3333, 0x33333339, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff65686, 0x40e000e2, 0x3feb3333, 0x33333339, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff56f6f, 0x33a3e6a6, 0x3feb3333, 0x33333339, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff48e50, 0xa711c89c, 0x3feb3333, 0x33333339, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff3b43d, 0x3c96813b, 0x3feb3333, 0x33333339, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff2e20e, 0x285fe00f, 0x3feb3333, 0x33333339, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff21862, 0xf3fade36, 0x3feb3333, 0x33333339, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3ff157a4, 0x7af2f204, 0x3feb3333, 0x33333339, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3ff0a00a, 0x3bce369f, 0x3feb3333, 0x33333339, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3fefe342, 0x22973a03, 0x3feb3333, 0x33333339, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fee98a5, 0x04f628dd, 0x3feb3333, 0x33333339, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fed5fd8, 0x0a4c241b, 0x3feb3333, 0x33333339, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fec384b, 0x7feec390, 0x3feb3333, 0x33333339, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3feb2151, 0x0fb6fcf7, 0x3feb3333, 0x33333339, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3fea1a25, 0xf2c82506, 0x3feb3333, 0x33333339, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3feb3333, 0x33333339, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe837fc, 0xff3b7c14, 0x3feb3333, 0x33333339, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe75b56, 0x8723f1cd, 0x3feb3333, 0x33333339, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x4003452d, 0x2a42ac28, 0x3feccccc, 0xccccccd3, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x400310d2, 0xfe7fcad8, 0x3feccccc, 0xccccccd3, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3feccccc, 0xccccccd3, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x40029efc, 0xe9f0f590, 0x3feccccc, 0xccccccd3, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40026127, 0x862b05f5, 0x3feccccc, 0xccccccd3, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x40021fd0, 0x9b1e712e, 0x3feccccc, 0xccccccd3, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4001dace, 0xaa5dc056, 0x3feccccc, 0xccccccd3, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x400191fb, 0xf721ce50, 0x3feccccc, 0xccccccd3, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x40014538, 0x5fa3af70, 0x3feccccc, 0xccccccd3, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4000f46b, 0x88a03600, 0x3feccccc, 0xccccccd3, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40009f87, 0x5343d017, 0x3feccccc, 0xccccccd3, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x4000468a, 0x8ace4df5, 0x3feccccc, 0xccccccd3, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x3fffd307, 0x52e32009, 0x3feccccc, 0xccccccd3, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x3fff1127, 0x088152ab, 0x3feccccc, 0xccccccd3, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3ffe47df, 0x3d0dd4ce, 0x3feccccc, 0xccccccd3, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffd77c7, 0xb196b31f, 0x3feccccc, 0xccccccd3, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffca1a6, 0x56770bcf, 0x3feccccc, 0xccccccd3, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffbc66e, 0x44cbc072, 0x3feccccc, 0xccccccd3, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffae73b, 0xd5e44e5a, 0x3feccccc, 0xccccccd3, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ffa054d, 0xbad44abd, 0x3feccccc, 0xccccccd3, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3feccccc, 0xccccccd3, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff83ea8, 0xedb40f71, 0x3feccccc, 0xccccccd3, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff75cba, 0xd2a40bd4, 0x3feccccc, 0xccccccd3, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff67d88, 0x63bc99bc, 0x3feccccc, 0xccccccd3, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff5a250, 0x52114e5f, 0x3feccccc, 0xccccccd3, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff4cc2e, 0xf6f1a70f, 0x3feccccc, 0xccccccd3, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff3fc17, 0x6b7a8560, 0x3feccccc, 0xccccccd3, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff332cf, 0xa0070783, 0x3feccccc, 0xccccccd3, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff270ef, 0x55a53a25, 0x3feccccc, 0xccccccd3, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3ff1b6e1, 0x92ebbe45, 0x3feccccc, 0xccccccd3, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3ff104e8, 0x0200ba00, 0x3feccccc, 0xccccccd3, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3ff05b1f, 0x9747ee2e, 0x3feccccc, 0xccccccd3, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fef730b, 0xd281f69b, 0x3feccccc, 0xccccccd3, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fee3ffd, 0x74897b19, 0x3feccccc, 0xccccccd3, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fed1cb2, 0xa799b306, 0x3feccccc, 0xccccccd3, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fec08aa, 0xe496efa6, 0x3feccccc, 0xccccccd3, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3feb034f, 0x38649c88, 0x3feccccc, 0xccccccd3, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3fea0bf9, 0xa94cde1c, 0x3feccccc, 0xccccccd3, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3feccccc, 0xccccccd3, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe844a1, 0x571188fe, 0x3feccccc, 0xccccccd3, 0x3fee6666, 0x6666666d},
-{32,0,123,__LINE__, 0x40030dfc, 0xd57ce4cc, 0x3fee6666, 0x6666666d, 0xbff00000, 0x00000000},
-{32,0,123,__LINE__, 0x4002d97c, 0x7f3321d1, 0x3fee6666, 0x6666666d, 0xbfee6666, 0x66666666},
-{32,0,123,__LINE__, 0x4002a225, 0xffe678cb, 0x3fee6666, 0x6666666d, 0xbfeccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x400267d3, 0x4beb12fe, 0x3fee6666, 0x6666666d, 0xbfeb3333, 0x33333332},
-{32,0,123,__LINE__, 0x40022a5f, 0x18f3451e, 0x3fee6666, 0x6666666d, 0xbfe99999, 0x99999998},
-{32,0,123,__LINE__, 0x4001e9a5, 0xc99335af, 0x3fee6666, 0x6666666d, 0xbfe7ffff, 0xfffffffe},
-{32,0,123,__LINE__, 0x4001a586, 0x8fc6c8cf, 0x3fee6666, 0x6666666d, 0xbfe66666, 0x66666664},
-{32,0,123,__LINE__, 0x40015de4, 0xca763c21, 0x3fee6666, 0x6666666d, 0xbfe4cccc, 0xccccccca},
-{32,0,123,__LINE__, 0x400112a9, 0x9ee56458, 0x3fee6666, 0x6666666d, 0xbfe33333, 0x33333330},
-{32,0,123,__LINE__, 0x4000c3c5, 0xca449e50, 0x3fee6666, 0x6666666d, 0xbfe19999, 0x99999996},
-{32,0,123,__LINE__, 0x40007133, 0xa108dee2, 0x3fee6666, 0x6666666d, 0xbfdfffff, 0xfffffff9},
-{32,0,123,__LINE__, 0x40001af9, 0x294450fa, 0x3fee6666, 0x6666666d, 0xbfdccccc, 0xccccccc6},
-{32,0,123,__LINE__, 0x3fff8254, 0x66b1ec6b, 0x3fee6666, 0x6666666d, 0xbfd99999, 0x99999993},
-{32,0,123,__LINE__, 0x3ffec7d4, 0x93fc7aa7, 0x3fee6666, 0x6666666d, 0xbfd66666, 0x66666660},
-{32,0,123,__LINE__, 0x3ffe06dc, 0x9297b73e, 0x3fee6666, 0x6666666d, 0xbfd33333, 0x3333332d},
-{32,0,123,__LINE__, 0x3ffd3ffa, 0xcd08c0c1, 0x3fee6666, 0x6666666d, 0xbfcfffff, 0xfffffff4},
-{32,0,123,__LINE__, 0x3ffc73e2, 0xe46d7f71, 0x3fee6666, 0x6666666d, 0xbfc99999, 0x9999998e},
-{32,0,123,__LINE__, 0x3ffba36c, 0x4c864173, 0x3fee6666, 0x6666666d, 0xbfc33333, 0x33333328},
-{32,0,123,__LINE__, 0x3ffacf8e, 0xc523642f, 0x3fee6666, 0x6666666d, 0xbfb99999, 0x99999983},
-{32,0,123,__LINE__, 0x3ff9f95c, 0xaa6341c4, 0x3fee6666, 0x6666666d, 0xbfa99999, 0x9999996c},
-{32,0,123,__LINE__, 0x3ff921fb, 0x54442d17, 0x3fee6666, 0x6666666d, 0x3cb70000, 0x00000000},
-{32,0,123,__LINE__, 0x3ff84a99, 0xfe25186a, 0x3fee6666, 0x6666666d, 0x3fa99999, 0x999999c8},
-{32,0,123,__LINE__, 0x3ff77467, 0xe364f5ff, 0x3fee6666, 0x6666666d, 0x3fb99999, 0x999999b1},
-{32,0,123,__LINE__, 0x3ff6a08a, 0x5c0218bb, 0x3fee6666, 0x6666666d, 0x3fc33333, 0x3333333f},
-{32,0,123,__LINE__, 0x3ff5d013, 0xc41adabd, 0x3fee6666, 0x6666666d, 0x3fc99999, 0x999999a6},
-{32,0,123,__LINE__, 0x3ff503fb, 0xdb7f996d, 0x3fee6666, 0x6666666d, 0x3fd00000, 0x00000006},
-{32,0,123,__LINE__, 0x3ff43d1a, 0x15f0a2f0, 0x3fee6666, 0x6666666d, 0x3fd33333, 0x33333339},
-{32,0,123,__LINE__, 0x3ff37c22, 0x148bdf87, 0x3fee6666, 0x6666666d, 0x3fd66666, 0x6666666c},
-{32,0,123,__LINE__, 0x3ff2c1a2, 0x41d66dc3, 0x3fee6666, 0x6666666d, 0x3fd99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3ff20e04, 0x55ffb83c, 0x3fee6666, 0x6666666d, 0x3fdccccc, 0xccccccd2},
-{32,0,123,__LINE__, 0x3ff1618f, 0x66769c69, 0x3fee6666, 0x6666666d, 0x3fe00000, 0x00000003},
-{32,0,123,__LINE__, 0x3ff0bc6b, 0x13ff1d8d, 0x3fee6666, 0x6666666d, 0x3fe19999, 0x9999999d},
-{32,0,123,__LINE__, 0x3ff01ea3, 0x6abd9180, 0x3fee6666, 0x6666666d, 0x3fe33333, 0x33333337},
-{32,0,123,__LINE__, 0x3fef105a, 0x2737c3d9, 0x3fee6666, 0x6666666d, 0x3fe4cccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fedf1d3, 0x11f59121, 0x3fee6666, 0x6666666d, 0x3fe66666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fece156, 0x2ac3dda1, 0x3fee6666, 0x6666666d, 0x3fe80000, 0x00000005},
-{32,0,123,__LINE__, 0x3febde70, 0xed439fe7, 0x3fee6666, 0x6666666d, 0x3fe99999, 0x9999999f},
-{32,0,123,__LINE__, 0x3feae8a0, 0x21646864, 0x3fee6666, 0x6666666d, 0x3feb3333, 0x33333339},
-{32,0,123,__LINE__, 0x3fe9ff55, 0x5176d133, 0x3fee6666, 0x6666666d, 0x3feccccc, 0xccccccd3},
-{32,0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3fee6666, 0x6666666d, 0x3fee6666, 0x6666666d},
-0,};
-test_atan2f(m)   {run_vector_1(m,atan2f_vec,(char *)(atan2f),"atan2f","fff");   }	
diff --git a/newlib/libm/test/atan_vec.c b/newlib/libm/test/atan_vec.c
deleted file mode 100644
index 12b44be74..000000000
--- a/newlib/libm/test/atan_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type atan_vec[] = {
-{64, 0,123,__LINE__, 0xbfec08aa, 0xe496efa6, 0xbff33333, 0x33333333},			/* -0.87605=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbfebe6ed, 0x93e2de0a, 0xbff30a3d, 0x70a3d70a},			/* -0.87193=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbfebc4da, 0xc279b378, 0xbff2e147, 0xae147ae1},			/* -0.86778=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xbfeba271, 0x78241551, 0xbff2b851, 0xeb851eb8},			/* -0.86357=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbfeb7fb0, 0xbad89c3a, 0xbff28f5c, 0x28f5c28f},			/* -0.85933=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfeb5c97, 0x8ec9f805, 0xbff26666, 0x66666666},			/* -0.85505=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbfeb3924, 0xf6762ef7, 0xbff23d70, 0xa3d70a3d},			/* -0.85072=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbfeb1557, 0xf2b704a7, 0xbff2147a, 0xe147ae14},			/* -0.84635=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbfeaf12f, 0x82d394f5, 0xbff1eb85, 0x1eb851eb},			/* -0.84194=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfeaccaa, 0xa4932fec, 0xbff1c28f, 0x5c28f5c2},			/* -0.83748=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfeaa7c8, 0x545183cc, 0xbff19999, 0x99999999},			/* -0.83298=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfea8287, 0x8d142296, 0xbff170a3, 0xd70a3d70},			/* -0.82843=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfea5ce7, 0x48a170fd, 0xbff147ae, 0x147ae147},			/* -0.82384=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfea36e6, 0x7f990cb5, 0xbff11eb8, 0x51eb851e},			/* -0.81920=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfea1084, 0x298db87a, 0xbff0f5c2, 0x8f5c28f5},			/* -0.81451=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfe9e9bf, 0x3d20dc70, 0xbff0cccc, 0xcccccccc},			/* -0.80978=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbfe9c296, 0xb01fa9a4, 0xbff0a3d7, 0x0a3d70a3},			/* -0.80500=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbfe99b09, 0x77a1efc6, 0xbff07ae1, 0x47ae147a},			/* -0.80017=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfe97316, 0x882ab459, 0xbff051eb, 0x851eb851},			/* -0.79529=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbfe94abc, 0xd5ca9ace, 0xbff028f5, 0xc28f5c28},			/* -0.79037=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfe921fb, 0x54442d17, 0xbfefffff, 0xfffffffe},			/* -0.78539=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfe8f8d0, 0xf7321466, 0xbfefae14, 0x7ae147ac},			/* -0.78037=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfe8cf3c, 0xb22f51e4, 0xbfef5c28, 0xf5c28f5a},			/* -0.77529=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfe8a53d, 0x79018729, 0xbfef0a3d, 0x70a3d708},			/* -0.77017=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfe87ad2, 0x3fc55e45, 0xbfeeb851, 0xeb851eb6},			/* -0.76499=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfe84ff9, 0xfb1d212c, 0xbfee6666, 0x66666664},			/* -0.75976=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfe824b3, 0xa0619018, 0xbfee147a, 0xe147ae12},			/* -0.75448=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfe7f8fe, 0x25d50679, 0xbfedc28f, 0x5c28f5c0},			/* -0.74914=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfe7ccd8, 0x82d8fdbc, 0xbfed70a3, 0xd70a3d6e},			/* -0.74375=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfe7a041, 0xb025fce7, 0xbfed1eb8, 0x51eb851c},			/* -0.73831=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfe77338, 0xa80603bc, 0xbfeccccc, 0xccccccca},			/* -0.73281=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfe745bc, 0x66917fae, 0xbfec7ae1, 0x47ae1478},			/* -0.72726=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfe717cb, 0xe9eed851, 0xbfec28f5, 0xc28f5c26},			/* -0.72165=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfe6e966, 0x3294a096, 0xbfebd70a, 0x3d70a3d4},			/* -0.71599=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfe6ba8a, 0x438e7924, 0xbfeb851e, 0xb851eb82},			/* -0.71027=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfe68b37, 0x22c4afb2, 0xbfeb3333, 0x33333330},			/* -0.70449=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfe65b6b, 0xd946a619, 0xbfeae147, 0xae147ade},			/* -0.69865=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfe62b27, 0x73980b0f, 0xbfea8f5c, 0x28f5c28c},			/* -0.69276=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfe5fa69, 0x0200ed43, 0xbfea3d70, 0xa3d70a3a},			/* -0.68681=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe5c92f, 0x98e0b06f, 0xbfe9eb85, 0x1eb851e8},			/* -0.68080=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfe5977a, 0x5103ea90, 0xbfe99999, 0x99999996},			/* -0.67474=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe56548, 0x47fd2dfe, 0xbfe947ae, 0x147ae144},			/* -0.66861=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe53298, 0xa080c38a, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.66242=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe4ff6a, 0x82c355fd, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.65617=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfe4cbbd, 0x1cdb8e6d, 0xbfe851eb, 0x851eb84e},			/* -0.64987=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe4978f, 0xa3269ede, 0xbfe7ffff, 0xfffffffc},			/* -0.64350=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe462e1, 0x50afb65c, 0xbfe7ae14, 0x7ae147aa},			/* -0.63707=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe42db1, 0x679a576c, 0xbfe75c28, 0xf5c28f58},			/* -0.63057=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe3f7ff, 0x318f8720, 0xbfe70a3d, 0x70a3d706},			/* -0.62402=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe3c1ca, 0x002dc874, 0xbfe6b851, 0xeb851eb4},			/* -0.61740=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe38b11, 0x2d7bd4aa, 0xbfe66666, 0x66666662},			/* -0.61072=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe353d4, 0x1c5dfe64, 0xbfe6147a, 0xe147ae10},			/* -0.60398=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe31c12, 0x390e29f6, 0xbfe5c28f, 0x5c28f5be},			/* -0.59717=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe2e3ca, 0xf996421a, 0xbfe570a3, 0xd70a3d6c},			/* -0.59030=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe2aafd, 0xde4d0c9b, 0xbfe51eb8, 0x51eb851a},			/* -0.58337=f(-0.66000)*/
-{63, 0,123,__LINE__, 0xbfe271aa, 0x72553ed1, 0xbfe4cccc, 0xccccccc8},			/* -0.57637=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe237d0, 0x4c1eadfe, 0xbfe47ae1, 0x47ae1476},			/* -0.56931=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe1fd6f, 0x0de97384, 0xbfe428f5, 0xc28f5c24},			/* -0.56218=f(-0.63000)*/
-{62, 0,123,__LINE__, 0xbfe1c286, 0x664ad8c6, 0xbfe3d70a, 0x3d70a3d2},			/* -0.55499=f(-0.62000)*/
-{62, 0,123,__LINE__, 0xbfe18716, 0x10b3da3e, 0xbfe3851e, 0xb851eb80},			/* -0.54774=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe14b1d, 0xd5f90cdd, 0xbfe33333, 0x3333332e},			/* -0.54041=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe10e9d, 0x8cdbac44, 0xbfe2e147, 0xae147adc},			/* -0.53303=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe0d195, 0x1a9393b2, 0xbfe28f5c, 0x28f5c28a},			/* -0.52558=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe09404, 0x7359dee7, 0xbfe23d70, 0xa3d70a38},			/* -0.51806=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe055eb, 0x9af3eb46, 0xbfe1eb85, 0x1eb851e6},			/* -0.51048=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe0174a, 0xa53e6cdf, 0xbfe19999, 0x99999994},			/* -0.50284=f(-0.55000)*/
-{63, 0,123,__LINE__, 0xbfdfb043, 0x6d708c01, 0xbfe147ae, 0x147ae142},			/* -0.49513=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfdf30e2, 0x0a19966b, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.48735=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfdeb071, 0xaf3a3187, 0xbfe0a3d7, 0x0a3d709e},			/* -0.47951=f(-0.52000)*/
-{62, 0,123,__LINE__, 0xbfde2ef3, 0x101033d6, 0xbfe051eb, 0x851eb84c},			/* -0.47161=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfddac67, 0x0561bb45, 0xbfdfffff, 0xfffffff4},			/* -0.46364=f(-0.50000)*/
-{62, 0,123,__LINE__, 0xbfdd28ce, 0x8e859fe6, 0xbfdf5c28, 0xf5c28f50},			/* -0.45561=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdca42a, 0xd266d565, 0xbfdeb851, 0xeb851eac},			/* -0.44751=f(-0.48000)*/
-{60, 0,123,__LINE__, 0xbfdc1e7d, 0x2081d8d7, 0xbfde147a, 0xe147ae08},			/* -0.43936=f(-0.47000)*/
-{63, 0,123,__LINE__, 0xbfdb97c6, 0xf1db4027, 0xbfdd70a3, 0xd70a3d64},			/* -0.43113=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdb1009, 0xe9ee79b0, 0xbfdccccc, 0xccccccc0},			/* -0.42285=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfda8747, 0xd793c3d1, 0xbfdc28f5, 0xc28f5c1c},			/* -0.41450=f(-0.44000)*/
-{61, 0,123,__LINE__, 0xbfd9fd82, 0xb5dc5e54, 0xbfdb851e, 0xb851eb78},			/* -0.40609=f(-0.43000)*/
-{62, 0,123,__LINE__, 0xbfd972bc, 0xace3f306, 0xbfdae147, 0xae147ad4},			/* -0.39762=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfd8e6f8, 0x12962e43, 0xbfda3d70, 0xa3d70a30},			/* -0.38909=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd85a37, 0x6b677db4, 0xbfd99999, 0x9999998c},			/* -0.38050=f(-0.40000)*/
-{62, 0,123,__LINE__, 0xbfd7cc7d, 0x6affe94c, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.37185=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd73dcc, 0xf4d6fa09, 0xbfd851eb, 0x851eb844},			/* -0.36314=f(-0.38000)*/
-{63, 0,123,__LINE__, 0xbfd6ae29, 0x1cbfa268, 0xbfd7ae14, 0x7ae147a0},			/* -0.35437=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd61d95, 0x27631e9d, 0xbfd70a3d, 0x70a3d6fc},			/* -0.34555=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd58c14, 0x8aa9c5ca, 0xbfd66666, 0x66666658},			/* -0.33667=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd4f9aa, 0xee10ca74, 0xbfd5c28f, 0x5c28f5b4},			/* -0.32773=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd4665c, 0x2aebeec6, 0xbfd51eb8, 0x51eb8510},			/* -0.31874=f(-0.33000)*/
-{59, 0,123,__LINE__, 0xbfd3d22c, 0x4c92394e, 0xbfd47ae1, 0x47ae146c},			/* -0.30970=f(-0.32000)*/
-{61, 0,123,__LINE__, 0xbfd33d1f, 0x9074c08c, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30060=f(-0.31000)*/
-{60, 0,123,__LINE__, 0xbfd2a73a, 0x661eaef8, 0xbfd33333, 0x33333324},			/* -0.29145=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd21081, 0x6f1dae73, 0xbfd28f5c, 0x28f5c280},			/* -0.28225=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd178f9, 0x7ed1f883, 0xbfd1eb85, 0x1eb851dc},			/* -0.27300=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd0e0a7, 0x9a25599f, 0xbfd147ae, 0x147ae138},			/* -0.26371=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd04790, 0xf72887c5, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25436=f(-0.26000)*/
-{57, 0,123,__LINE__, 0xbfcf5b75, 0xf92c80be, 0xbfcfffff, 0xffffffe0},			/* -0.24497=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfce2656, 0x82776e58, 0xbfceb851, 0xeb851e98},			/* -0.23554=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfccefcf, 0x168bece2, 0xbfcd70a3, 0xd70a3d50},			/* -0.22606=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcbb7eb, 0x9ee7d2f8, 0xbfcc28f5, 0xc28f5c08},			/* -0.21655=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfca7eb8, 0x6059c7bb, 0xbfcae147, 0xae147ac0},			/* -0.20699=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc94441, 0xf8f725ec, 0xbfc99999, 0x99999978},			/* -0.19739=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc80895, 0x5ddac671, 0xbfc851eb, 0x851eb830},			/* -0.18776=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc6cbbf, 0xd8acff2f, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17809=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc58dcf, 0x04f55e35, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16839=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc44ed0, 0xcd36e60b, 0xbfc47ae1, 0x47ae1458},			/* -0.15865=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc30ed3, 0x67d7cce1, 0xbfc33333, 0x33333310},			/* -0.14888=f(-0.15000)*/
-{61, 0,123,__LINE__, 0xbfc1cde5, 0x53d5fe42, 0xbfc1eb85, 0x1eb851c8},			/* -0.13909=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc08c15, 0x5549dc61, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12927=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbe92e4, 0xe371f633, 0xbfbeb851, 0xeb851e71},			/* -0.11942=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc0c17, 0xd8759634, 0xbfbc28f5, 0xc28f5be2},			/* -0.10955=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb983e2, 0x82e2cc06, 0xbfb99999, 0x99999953},			/* -0.09966=f(-0.00100)*/
-{63, 0,123,__LINE__, 0xbfb6fa64, 0x46b1cb0e, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08975=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb46fbc, 0xe9dfcbbb, 0xbfb47ae1, 0x47ae1435},			/* -0.07982=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1e40c, 0x8b780f98, 0xbfb1eb85, 0x1eb851a6},			/* -0.06988=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeaee7, 0x34b5dc99, 0xbfaeb851, 0xeb851e2d},			/* -0.05992=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99425, 0x97929e9b, 0xbfa99999, 0x9999990e},			/* -0.04995=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47816, 0x23768ccb, 0xbfa47ae1, 0x47ae13ef},			/* -0.03997=f(-0.04000)*/
-{62, 0,123,__LINE__, 0xbf9eb5f6, 0x44234a6b, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947a2e, 0x5daffdee, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847ab4, 0x8b1ef92b, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{62, 0,123,__LINE__, 0x3f847ab4, 0x8b1efd8f, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947a2e, 0x5db0001f, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb5f6, 0x44234c9d, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47816, 0x23768de3, 0x3fa47ae1, 0x47ae1508},			/* 0.03997=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99425, 0x97929fb4, 0x3fa99999, 0x99999a27},			/* 0.04995=f(0.05000)*/
-{63, 0,123,__LINE__, 0x3faeaee7, 0x34b5ddb1, 0x3faeb851, 0xeb851f46},			/* 0.05992=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1e40c, 0x8b781023, 0x3fb1eb85, 0x1eb85232},			/* 0.06988=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb46fbc, 0xe9dfcc46, 0x3fb47ae1, 0x47ae14c1},			/* 0.07982=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb6fa64, 0x46b1cb99, 0x3fb70a3d, 0x70a3d750},			/* 0.08975=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb983e2, 0x82e2cc91, 0x3fb99999, 0x999999df},			/* 0.09966=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc0c17, 0xd87596bf, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10955=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbe92e4, 0xe371f6be, 0x3fbeb851, 0xeb851efd},			/* 0.11942=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc08c15, 0x5549dca5, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12927=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1cde5, 0x53d5fe87, 0x3fc1eb85, 0x1eb8520e},			/* 0.13909=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc30ed3, 0x67d7cd26, 0x3fc33333, 0x33333356},			/* 0.14888=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc44ed0, 0xcd36e650, 0x3fc47ae1, 0x47ae149e},			/* 0.15865=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc58dcf, 0x04f55e79, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16839=f(0.17000)*/
-{61, 0,123,__LINE__, 0x3fc6cbbf, 0xd8acff73, 0x3fc70a3d, 0x70a3d72e},			/* 0.17809=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc80895, 0x5ddac6b5, 0x3fc851eb, 0x851eb876},			/* 0.18776=f(0.19000)*/
-{63, 0,123,__LINE__, 0x3fc94441, 0xf8f7262f, 0x3fc99999, 0x999999be},			/* 0.19739=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fca7eb8, 0x6059c7fe, 0x3fcae147, 0xae147b06},			/* 0.20699=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcbb7eb, 0x9ee7d33b, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21655=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fccefcf, 0x168bed26, 0x3fcd70a3, 0xd70a3d96},			/* 0.22606=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fce2656, 0x82776e9a, 0x3fceb851, 0xeb851ede},			/* 0.23554=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fcf5b75, 0xf92c8102, 0x3fd00000, 0x00000013},			/* 0.24497=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd04790, 0xf72887e6, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25436=f(0.26000)*/
-{63, 0,123,__LINE__, 0x3fd0e0a7, 0x9a2559c0, 0x3fd147ae, 0x147ae15b},			/* 0.26371=f(0.27000)*/
-{61, 0,123,__LINE__, 0x3fd178f9, 0x7ed1f8a4, 0x3fd1eb85, 0x1eb851ff},			/* 0.27300=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd21081, 0x6f1dae93, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28225=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd2a73a, 0x661eaf18, 0x3fd33333, 0x33333347},			/* 0.29145=f(0.30000)*/
-{61, 0,123,__LINE__, 0x3fd33d1f, 0x9074c0aa, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30060=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd3d22c, 0x4c92396e, 0x3fd47ae1, 0x47ae148f},			/* 0.30970=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd4665c, 0x2aebeee6, 0x3fd51eb8, 0x51eb8533},			/* 0.31874=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd4f9aa, 0xee10ca93, 0x3fd5c28f, 0x5c28f5d7},			/* 0.32773=f(0.34000)*/
-{63, 0,123,__LINE__, 0x3fd58c14, 0x8aa9c5e8, 0x3fd66666, 0x6666667b},			/* 0.33667=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd61d95, 0x27631ebc, 0x3fd70a3d, 0x70a3d71f},			/* 0.34555=f(0.36000)*/
-{63, 0,123,__LINE__, 0x3fd6ae29, 0x1cbfa286, 0x3fd7ae14, 0x7ae147c3},			/* 0.35437=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd73dcc, 0xf4d6fa28, 0x3fd851eb, 0x851eb867},			/* 0.36314=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd7cc7d, 0x6affe96b, 0x3fd8f5c2, 0x8f5c290b},			/* 0.37185=f(0.39000)*/
-{63, 0,123,__LINE__, 0x3fd85a37, 0x6b677dd3, 0x3fd99999, 0x999999af},			/* 0.38050=f(0.40000)*/
-{62, 0,123,__LINE__, 0x3fd8e6f8, 0x12962e60, 0x3fda3d70, 0xa3d70a53},			/* 0.38909=f(0.41000)*/
-{63, 0,123,__LINE__, 0x3fd972bc, 0xace3f325, 0x3fdae147, 0xae147af7},			/* 0.39762=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fd9fd82, 0xb5dc5e72, 0x3fdb851e, 0xb851eb9b},			/* 0.40609=f(0.43000)*/
-{63, 0,123,__LINE__, 0x3fda8747, 0xd793c3ef, 0x3fdc28f5, 0xc28f5c3f},			/* 0.41450=f(0.44000)*/
-{59, 0,123,__LINE__, 0x3fdb1009, 0xe9ee79d0, 0x3fdccccc, 0xcccccce3},			/* 0.42285=f(0.45000)*/
-{63, 0,123,__LINE__, 0x3fdb97c6, 0xf1db4044, 0x3fdd70a3, 0xd70a3d87},			/* 0.43113=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdc1e7d, 0x2081d8f4, 0x3fde147a, 0xe147ae2b},			/* 0.43936=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdca42a, 0xd266d583, 0x3fdeb851, 0xeb851ecf},			/* 0.44751=f(0.48000)*/
-{62, 0,123,__LINE__, 0x3fdd28ce, 0x8e85a002, 0x3fdf5c28, 0xf5c28f73},			/* 0.45561=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fddac67, 0x0561bb61, 0x3fe00000, 0x0000000b},			/* 0.46364=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fde2ef3, 0x101033ef, 0x3fe051eb, 0x851eb85d},			/* 0.47161=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fdeb071, 0xaf3a31a2, 0x3fe0a3d7, 0x0a3d70af},			/* 0.47951=f(0.52000)*/
-{62, 0,123,__LINE__, 0x3fdf30e2, 0x0a199684, 0x3fe0f5c2, 0x8f5c2901},			/* 0.48735=f(0.53000)*/
-{63, 0,123,__LINE__, 0x3fdfb043, 0x6d708c1b, 0x3fe147ae, 0x147ae153},			/* 0.49513=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe0174a, 0xa53e6cec, 0x3fe19999, 0x999999a5},			/* 0.50284=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe055eb, 0x9af3eb52, 0x3fe1eb85, 0x1eb851f7},			/* 0.51048=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe09404, 0x7359def4, 0x3fe23d70, 0xa3d70a49},			/* 0.51806=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe0d195, 0x1a9393c0, 0x3fe28f5c, 0x28f5c29b},			/* 0.52558=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe10e9d, 0x8cdbac50, 0x3fe2e147, 0xae147aed},			/* 0.53303=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe14b1d, 0xd5f90cea, 0x3fe33333, 0x3333333f},			/* 0.54041=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe18716, 0x10b3da4a, 0x3fe3851e, 0xb851eb91},			/* 0.54774=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe1c286, 0x664ad8d2, 0x3fe3d70a, 0x3d70a3e3},			/* 0.55499=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe1fd6f, 0x0de97390, 0x3fe428f5, 0xc28f5c35},			/* 0.56218=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe237d0, 0x4c1eae0a, 0x3fe47ae1, 0x47ae1487},			/* 0.56931=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe271aa, 0x72553edd, 0x3fe4cccc, 0xccccccd9},			/* 0.57637=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe2aafd, 0xde4d0ca7, 0x3fe51eb8, 0x51eb852b},			/* 0.58337=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe2e3ca, 0xf9964226, 0x3fe570a3, 0xd70a3d7d},			/* 0.59030=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe31c12, 0x390e2a02, 0x3fe5c28f, 0x5c28f5cf},			/* 0.59717=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe353d4, 0x1c5dfe70, 0x3fe6147a, 0xe147ae21},			/* 0.60398=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe38b11, 0x2d7bd4b6, 0x3fe66666, 0x66666673},			/* 0.61072=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe3c1ca, 0x002dc87f, 0x3fe6b851, 0xeb851ec5},			/* 0.61740=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe3f7ff, 0x318f872b, 0x3fe70a3d, 0x70a3d717},			/* 0.62402=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe42db1, 0x679a5777, 0x3fe75c28, 0xf5c28f69},			/* 0.63057=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe462e1, 0x50afb668, 0x3fe7ae14, 0x7ae147bb},			/* 0.63707=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe4978f, 0xa3269ee9, 0x3fe80000, 0x0000000d},			/* 0.64350=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe4cbbd, 0x1cdb8e78, 0x3fe851eb, 0x851eb85f},			/* 0.64987=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe4ff6a, 0x82c35607, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.65617=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe53298, 0xa080c394, 0x3fe8f5c2, 0x8f5c2903},			/* 0.66242=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe56548, 0x47fd2e08, 0x3fe947ae, 0x147ae155},			/* 0.66861=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe5977a, 0x5103ea9a, 0x3fe99999, 0x999999a7},			/* 0.67474=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe5c92f, 0x98e0b079, 0x3fe9eb85, 0x1eb851f9},			/* 0.68080=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe5fa69, 0x0200ed4d, 0x3fea3d70, 0xa3d70a4b},			/* 0.68681=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe62b27, 0x73980b19, 0x3fea8f5c, 0x28f5c29d},			/* 0.69276=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe65b6b, 0xd946a623, 0x3feae147, 0xae147aef},			/* 0.69865=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe68b37, 0x22c4afbc, 0x3feb3333, 0x33333341},			/* 0.70449=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe6ba8a, 0x438e792e, 0x3feb851e, 0xb851eb93},			/* 0.71027=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe6e966, 0x3294a09f, 0x3febd70a, 0x3d70a3e5},			/* 0.71599=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe717cb, 0xe9eed85b, 0x3fec28f5, 0xc28f5c37},			/* 0.72165=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe745bc, 0x66917fb7, 0x3fec7ae1, 0x47ae1489},			/* 0.72726=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe77338, 0xa80603c6, 0x3feccccc, 0xccccccdb},			/* 0.73281=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe7a041, 0xb025fcf0, 0x3fed1eb8, 0x51eb852d},			/* 0.73831=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe7ccd8, 0x82d8fdc5, 0x3fed70a3, 0xd70a3d7f},			/* 0.74375=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe7f8fe, 0x25d50682, 0x3fedc28f, 0x5c28f5d1},			/* 0.74914=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fe824b3, 0xa0619021, 0x3fee147a, 0xe147ae23},			/* 0.75448=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fe84ff9, 0xfb1d2135, 0x3fee6666, 0x66666675},			/* 0.75976=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fe87ad2, 0x3fc55e4e, 0x3feeb851, 0xeb851ec7},			/* 0.76499=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fe8a53d, 0x79018731, 0x3fef0a3d, 0x70a3d719},			/* 0.77017=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fe8cf3c, 0xb22f51ed, 0x3fef5c28, 0xf5c28f6b},			/* 0.77529=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fe8f8d0, 0xf732146f, 0x3fefae14, 0x7ae147bd},			/* 0.78037=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fe921fb, 0x54442d1f, 0x3ff00000, 0x00000007},			/* 0.78539=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fe94abc, 0xd5ca9ad6, 0x3ff028f5, 0xc28f5c30},			/* 0.79037=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fe97316, 0x882ab461, 0x3ff051eb, 0x851eb859},			/* 0.79529=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fe99b09, 0x77a1efcd, 0x3ff07ae1, 0x47ae1482},			/* 0.80017=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fe9c296, 0xb01fa9ac, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.80500=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fe9e9bf, 0x3d20dc77, 0x3ff0cccc, 0xccccccd4},			/* 0.80978=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fea1084, 0x298db881, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.81451=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fea36e6, 0x7f990cbc, 0x3ff11eb8, 0x51eb8526},			/* 0.81920=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fea5ce7, 0x48a17105, 0x3ff147ae, 0x147ae14f},			/* 0.82384=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fea8287, 0x8d14229d, 0x3ff170a3, 0xd70a3d78},			/* 0.82843=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3feaa7c8, 0x545183d3, 0x3ff19999, 0x999999a1},			/* 0.83298=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3feaccaa, 0xa4932ff4, 0x3ff1c28f, 0x5c28f5ca},			/* 0.83748=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3feaf12f, 0x82d394fc, 0x3ff1eb85, 0x1eb851f3},			/* 0.84194=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3feb1557, 0xf2b704ae, 0x3ff2147a, 0xe147ae1c},			/* 0.84635=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3feb3924, 0xf6762efe, 0x3ff23d70, 0xa3d70a45},			/* 0.85072=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3feb5c97, 0x8ec9f80c, 0x3ff26666, 0x6666666e},			/* 0.85505=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3feb7fb0, 0xbad89c41, 0x3ff28f5c, 0x28f5c297},			/* 0.85933=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3feba271, 0x78241558, 0x3ff2b851, 0xeb851ec0},			/* 0.86357=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3febc4da, 0xc279b37f, 0x3ff2e147, 0xae147ae9},			/* 0.86778=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3febe6ed, 0x93e2de10, 0x3ff30a3d, 0x70a3d712},			/* 0.87193=f(1.19000)*/
-{64, 0,123,__LINE__, 0xbff69b81, 0x54baf42e, 0xc01921fb, 0x54442d18},			/* -1.41296=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xbff5c97d, 0x37d98aa3, 0xc012d97c, 0x7f3321d2},			/* -1.36169=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xbff433b8, 0xa322ddd2, 0xc00921fb, 0x54442d18},			/* -1.26262=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xbff00fe9, 0x87ed02ff, 0xbff921fb, 0x54442d18},			/* -1.00388=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff00fe9, 0x87ed02ff, 0x3ff921fb, 0x54442d18},			/* 1.00388=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ff433b8, 0xa322ddd2, 0x400921fb, 0x54442d18},			/* 1.26262=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3ff5c97d, 0x37d98aa3, 0x4012d97c, 0x7f3321d2},			/* 1.36169=f(4.71238)*/
-{64, 0,123,__LINE__, 0xbff8997f, 0xbb8b19c0, 0xc03e0000, 0x00000000},			/* -1.53747=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbff8914e, 0x9558e14d, 0xc03c4ccc, 0xcccccccd},			/* -1.53547=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xbff88811, 0xbbe6dd19, 0xc03a9999, 0x9999999a},			/* -1.53322=f(-26.6000)*/
-{64, 0,123,__LINE__, 0xbff87d92, 0x7628865c, 0xc038e666, 0x66666667},			/* -1.53065=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xbff8718a, 0x0c21772b, 0xc0373333, 0x33333334},			/* -1.52772=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbff8639b, 0x79e21172, 0xc0358000, 0x00000001},			/* -1.52431=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xbff85349, 0xe792c6df, 0xc033cccc, 0xccccccce},			/* -1.52033=f(-19.8000)*/
-{64, 0,123,__LINE__, 0xbff83fe9, 0xca4b0fb2, 0xc0321999, 0x9999999b},			/* -1.51560=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xbff82888, 0xd516330c, 0xc0306666, 0x66666668},			/* -1.50989=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbff80bc5, 0x5b9fbf46, 0xc02d6666, 0x6666666a},			/* -1.50287=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xbff7e786, 0x2aa0157c, 0xc02a0000, 0x00000004},			/* -1.49402=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xbff7b872, 0x197c1745, 0xc0269999, 0x9999999e},			/* -1.48253=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xbff778d9, 0x2c06c36f, 0xc0233333, 0x33333338},			/* -1.46700=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xbff71e3e, 0x5f2c979f, 0xc01f9999, 0x999999a3},			/* -1.44488=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xbff692fa, 0x44218618, 0xc018cccc, 0xccccccd6},			/* -1.41088=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xbff5a250, 0x52114e62, 0xc0120000, 0x00000009},			/* -1.35212=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbff3a4f4, 0xa8668b6d, 0xc0066666, 0x66666678},			/* -1.22777=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbfeaa7c8, 0x545183ed, 0xbff19999, 0x999999bd},			/* -0.83298=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe14b1d, 0xd5f90cac, 0x3fe33333, 0x333332ec},			/* 0.54041=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff29219, 0xa497099b, 0x40026666, 0x66666654},			/* 1.16066=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3ff5368c, 0x951e9cfa, 0x400fffff, 0xffffffee},			/* 1.32581=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3ff65a9f, 0xe0f20774, 0x4016cccc, 0xccccccc4},			/* 1.39712=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3ff6fbcd, 0x16bebe3f, 0x401d9999, 0x99999991},			/* 1.43647=f(7.40000)*/
-{64, 0,123,__LINE__, 0x3ff761ab, 0xb0d2ec50, 0x40223333, 0x3333332f},			/* 1.46134=f(9.10000)*/
-{64, 0,123,__LINE__, 0x3ff7a7cd, 0x013209a5, 0x40259999, 0x99999995},			/* 1.47846=f(10.8000)*/
-{64, 0,123,__LINE__, 0x3ff7daff, 0x85a63058, 0x4028ffff, 0xfffffffb},			/* 1.49096=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3ff80201, 0xa882c932, 0x402c6666, 0x66666661},			/* 1.50049=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3ff820b5, 0xe69c2ec6, 0x402fcccc, 0xccccccc7},			/* 1.50798=f(15.9000)*/
-{64, 0,123,__LINE__, 0x3ff83981, 0x22b99e8c, 0x40319999, 0x99999997},			/* 1.51403=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3ff84df1, 0x81e40544, 0x40334ccc, 0xccccccca},			/* 1.51902=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3ff85f14, 0xd43d81be, 0x4034ffff, 0xfffffffd},			/* 1.52321=f(21.0000)*/
-{64, 0,123,__LINE__, 0x3ff86da8, 0x6687209e, 0x4036b333, 0x33333330},			/* 1.52677=f(22.7000)*/
-{64, 0,123,__LINE__, 0x3ff87a34, 0xf080f2f8, 0x40386666, 0x66666663},			/* 1.52983=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3ff8851f, 0xa51ef694, 0x403a1999, 0x99999996},			/* 1.53250=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3ff88eb5, 0x0616141e, 0x403bcccc, 0xccccccc9},			/* 1.53484=f(27.8000)*/
-{64, 0,123,__LINE__, 0x3ff8972f, 0xfc482372, 0x403d7fff, 0xfffffffc},			/* 1.53691=f(29.5000)*/
-0,};
-test_atan(m)   {run_vector_1(m,atan_vec,(char *)(atan),"atan","dd");   }	
diff --git a/newlib/libm/test/atanf_vec.c b/newlib/libm/test/atanf_vec.c
deleted file mode 100644
index c907fe5ac..000000000
--- a/newlib/libm/test/atanf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type atanf_vec[] = {
-{11, 0,123,__LINE__, 0xbfec08aa, 0xed5c7cec, 0xbff33333, 0x33333333},			/* -0.87605=f(-1.20000)*/
-{11, 0,123,__LINE__, 0xbfebe6ed, 0x9fbacab8, 0xbff30a3d, 0x70a3d70a},			/* -0.87193=f(-1.19000)*/
-{11, 0,123,__LINE__, 0xbfebc4da, 0xb84ba54b, 0xbff2e147, 0xae147ae1},			/* -0.86778=f(-1.18000)*/
-{11, 0,123,__LINE__, 0xbfeba271, 0x6d27a852, 0xbff2b851, 0xeb851eb8},			/* -0.86357=f(-1.17000)*/
-{11, 0,123,__LINE__, 0xbfeb7fb0, 0xb4e51557, 0xbff28f5c, 0x28f5c28f},			/* -0.85933=f(-1.16000)*/
-{11, 0,123,__LINE__, 0xbfeb5c97, 0x88c89da5, 0xbff26666, 0x66666666},			/* -0.85505=f(-1.15000)*/
-{11, 0,123,__LINE__, 0xbfeb3924, 0xf3e86154, 0xbff23d70, 0xa3d70a3d},			/* -0.85072=f(-1.14000)*/
-{11, 0,123,__LINE__, 0xbfeb1557, 0xf23cdf13, 0xbff2147a, 0xe147ae14},			/* -0.84635=f(-1.13000)*/
-{11, 0,123,__LINE__, 0xbfeaf12f, 0x834a84a7, 0xbff1eb85, 0x1eb851eb},			/* -0.84194=f(-1.12000)*/
-{11, 0,123,__LINE__, 0xbfeaccaa, 0xa707e18c, 0xbff1c28f, 0x5c28f5c2},			/* -0.83748=f(-1.11000)*/
-{11, 0,123,__LINE__, 0xbfeaa7c8, 0x5a1121a9, 0xbff19999, 0x99999999},			/* -0.83298=f(-1.10000)*/
-{11, 0,123,__LINE__, 0xbfea8287, 0x94f6bb43, 0xbff170a3, 0xd70a3d70},			/* -0.82843=f(-1.09000)*/
-{11, 0,123,__LINE__, 0xbfea5ce7, 0x53d5c48d, 0xbff147ae, 0x147ae147},			/* -0.82384=f(-1.08000)*/
-{11, 0,123,__LINE__, 0xbfea36e6, 0x8c891b33, 0xbff11eb8, 0x51eb851e},			/* -0.81920=f(-1.07000)*/
-{11, 0,123,__LINE__, 0xbfea1084, 0x1aeb18ae, 0xbff0f5c2, 0x8f5c28f5},			/* -0.81451=f(-1.06000)*/
-{11, 0,123,__LINE__, 0xbfe9e9bf, 0x30abbe1d, 0xbff0cccc, 0xcccccccc},			/* -0.80978=f(-1.05000)*/
-{11, 0,123,__LINE__, 0xbfe9c296, 0xa60875e6, 0xbff0a3d7, 0x0a3d70a3},			/* -0.80500=f(-1.04000)*/
-{11, 0,123,__LINE__, 0xbfe99b09, 0x7047b825, 0xbff07ae1, 0x47ae147a},			/* -0.80017=f(-1.03000)*/
-{11, 0,123,__LINE__, 0xbfe97316, 0x83352f94, 0xbff051eb, 0x851eb851},			/* -0.79529=f(-1.02000)*/
-{11, 0,123,__LINE__, 0xbfe94abc, 0xd32a21dc, 0xbff028f5, 0xc28f5c28},			/* -0.79037=f(-1.01000)*/
-{13, 0,123,__LINE__, 0xbfe921fb, 0x54442d18, 0xbfefffff, 0xfffffffe},			/* -0.78539=f(-0.01000)*/
-{13, 0,123,__LINE__, 0xbfe8f8d0, 0xf9bf1e5c, 0xbfefae14, 0x7ae147ac},			/* -0.78037=f(-0.99000)*/
-{13, 0,123,__LINE__, 0xbfe8cf3c, 0xb73a3b37, 0xbfef5c28, 0xf5c28f5a},			/* -0.77529=f(-0.98000)*/
-{13, 0,123,__LINE__, 0xbfe8a53d, 0x810df2de, 0xbfef0a3d, 0x70a3d708},			/* -0.77017=f(-0.97000)*/
-{13, 0,123,__LINE__, 0xbfe87ad2, 0x395f26bf, 0xbfeeb851, 0xeb851eb6},			/* -0.76499=f(-0.96000)*/
-{13, 0,123,__LINE__, 0xbfe84ff9, 0xf77706bc, 0xbfee6666, 0x66666664},			/* -0.75976=f(-0.95000)*/
-{13, 0,123,__LINE__, 0xbfe824b3, 0x9f766e2d, 0xbfee147a, 0xe147ae12},			/* -0.75448=f(-0.94000)*/
-{12, 0,123,__LINE__, 0xbfe7f8fe, 0x26e8534c, 0xbfedc28f, 0x5c28f5c0},			/* -0.74914=f(-0.93000)*/
-{12, 0,123,__LINE__, 0xbfe7ccd8, 0x87ca915d, 0xbfed70a3, 0xd70a3d6e},			/* -0.74375=f(-0.92000)*/
-{12, 0,123,__LINE__, 0xbfe7a041, 0xb8a10028, 0xbfed1eb8, 0x51eb851c},			/* -0.73831=f(-0.91000)*/
-{12, 0,123,__LINE__, 0xbfe77338, 0xa16457bc, 0xbfeccccc, 0xccccccca},			/* -0.73281=f(-0.90000)*/
-{12, 0,123,__LINE__, 0xbfe745bc, 0x62166aea, 0xbfec7ae1, 0x47ae1478},			/* -0.72726=f(-0.89000)*/
-{12, 0,123,__LINE__, 0xbfe717cb, 0xe7ed10e9, 0xbfec28f5, 0xc28f5c26},			/* -0.72165=f(-0.88000)*/
-{12, 0,123,__LINE__, 0xbfe6e966, 0x33acb528, 0xbfebd70a, 0x3d70a3d4},			/* -0.71599=f(-0.87000)*/
-{12, 0,123,__LINE__, 0xbfe6ba8a, 0x482e8074, 0xbfeb851e, 0xb851eb82},			/* -0.71027=f(-0.86000)*/
-{12, 0,123,__LINE__, 0xbfe68b37, 0x2a6ebef1, 0xbfeb3333, 0x33333330},			/* -0.70449=f(-0.85000)*/
-{12, 0,123,__LINE__, 0xbfe65b6b, 0xd188e9f3, 0xbfeae147, 0xae147ade},			/* -0.69865=f(-0.84000)*/
-{12, 0,123,__LINE__, 0xbfe62b27, 0x6d01d27f, 0xbfea8f5c, 0x28f5c28c},			/* -0.69276=f(-0.83000)*/
-{12, 0,123,__LINE__, 0xbfe5fa69, 0x00056d81, 0xbfea3d70, 0xa3d70a3a},			/* -0.68681=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbfe5c92f, 0x9b0e5152, 0xbfe9eb85, 0x1eb851e8},			/* -0.68080=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbfe5977a, 0x54a52e38, 0xbfe99999, 0x99999996},			/* -0.67474=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbfe56548, 0x4e320115, 0xbfe947ae, 0x147ae144},			/* -0.66861=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbfe53298, 0x96200713, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.66242=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbfe4ff6a, 0x7f7bb194, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.65617=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbfe4cbbd, 0x15582c7e, 0xbfe851eb, 0x851eb84e},			/* -0.64987=f(-0.76000)*/
-{14, 0,123,__LINE__, 0xbfe4978f, 0xa1fb0886, 0xbfe7ffff, 0xfffffffc},			/* -0.64350=f(-0.75000)*/
-{14, 0,123,__LINE__, 0xbfe462e1, 0x5335bbc3, 0xbfe7ae14, 0x7ae147aa},			/* -0.63707=f(-0.74000)*/
-{14, 0,123,__LINE__, 0xbfe42db1, 0x6e1b3f75, 0xbfe75c28, 0xf5c28f58},			/* -0.63057=f(-0.73000)*/
-{13, 0,123,__LINE__, 0xbfe3f7ff, 0x3959c7d8, 0xbfe70a3d, 0x70a3d706},			/* -0.62402=f(-0.72000)*/
-{13, 0,123,__LINE__, 0xbfe3c1c9, 0xf6f0d59c, 0xbfe6b851, 0xeb851eb4},			/* -0.61740=f(-0.71000)*/
-{13, 0,123,__LINE__, 0xbfe38b11, 0x2c1e201f, 0xbfe66666, 0x66666662},			/* -0.61072=f(-0.70000)*/
-{13, 0,123,__LINE__, 0xbfe353d4, 0x193fe9ed, 0xbfe6147a, 0xe147ae10},			/* -0.60398=f(-0.69000)*/
-{13, 0,123,__LINE__, 0xbfe31c12, 0x3e930158, 0xbfe5c28f, 0x5c28f5be},			/* -0.59717=f(-0.68000)*/
-{13, 0,123,__LINE__, 0xbfe2e3cb, 0x01e4390e, 0xbfe570a3, 0xd70a3d6c},			/* -0.59030=f(-0.67000)*/
-{13, 0,123,__LINE__, 0xbfe2aafd, 0xe986dd76, 0xbfe51eb8, 0x51eb851a},			/* -0.58337=f(-0.66000)*/
-{13, 0,123,__LINE__, 0xbfe271aa, 0x6ee11b45, 0xbfe4cccc, 0xccccccc8},			/* -0.57637=f(-0.65000)*/
-{13, 0,123,__LINE__, 0xbfe237d0, 0x460f2953, 0xbfe47ae1, 0x47ae1476},			/* -0.56931=f(-0.64000)*/
-{13, 0,123,__LINE__, 0xbfe1fd6f, 0x0a84c353, 0xbfe428f5, 0xc28f5c24},			/* -0.56218=f(-0.63000)*/
-{14, 0,123,__LINE__, 0xbfe1c286, 0x6531e75a, 0xbfe3d70a, 0x3d70a3d2},			/* -0.55499=f(-0.62000)*/
-{14, 0,123,__LINE__, 0xbfe18716, 0x19161382, 0xbfe3851e, 0xb851eb80},			/* -0.54774=f(-0.61000)*/
-{14, 0,123,__LINE__, 0xbfe14b1d, 0xde10c1f6, 0xbfe33333, 0x3333332e},			/* -0.54041=f(-0.60000)*/
-{14, 0,123,__LINE__, 0xbfe10e9d, 0x7e7f3fbb, 0xbfe2e147, 0xae147adc},			/* -0.53303=f(-0.59000)*/
-{14, 0,123,__LINE__, 0xbfe0d195, 0x0c70aa84, 0xbfe28f5c, 0x28f5c28a},			/* -0.52558=f(-0.58000)*/
-{14, 0,123,__LINE__, 0xbfe09404, 0x778b2a8c, 0xbfe23d70, 0xa3d70a38},			/* -0.51806=f(-0.57000)*/
-{15, 0,123,__LINE__, 0xbfe055eb, 0x9964e91c, 0xbfe1eb85, 0x1eb851e6},			/* -0.51048=f(-0.56000)*/
-{15, 0,123,__LINE__, 0xbfe0174a, 0xa8ef77cf, 0xbfe19999, 0x99999994},			/* -0.50284=f(-0.55000)*/
-{10, 0,123,__LINE__, 0xbfdfb043, 0x6ef23d12, 0xbfe147ae, 0x147ae142},			/* -0.49513=f(-0.54000)*/
-{10, 0,123,__LINE__, 0xbfdf30e1, 0xf58d3f1e, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.48735=f(-0.53000)*/
-{10, 0,123,__LINE__, 0xbfdeb071, 0x9e18ea06, 0xbfe0a3d7, 0x0a3d709e},			/* -0.47951=f(-0.52000)*/
-{10, 0,123,__LINE__, 0xbfde2ef3, 0x066ab640, 0xbfe051eb, 0x851eb84c},			/* -0.47161=f(-0.51000)*/
-{10, 0,123,__LINE__, 0xbfddac67, 0x133304db, 0xbfdfffff, 0xfffffff4},			/* -0.46364=f(-0.50000)*/
-{14, 0,123,__LINE__, 0xbfdd28ce, 0xa41ae9c9, 0xbfdf5c28, 0xf5c28f50},			/* -0.45561=f(-0.49000)*/
-{14, 0,123,__LINE__, 0xbfdca42a, 0xcd1ebc0a, 0xbfdeb851, 0xeb851eac},			/* -0.44751=f(-0.48000)*/
-{14, 0,123,__LINE__, 0xbfdc1e7d, 0x1f8f11f0, 0xbfde147a, 0xe147ae08},			/* -0.43936=f(-0.47000)*/
-{13, 0,123,__LINE__, 0xbfdb97c6, 0xec3383f5, 0xbfdd70a3, 0xd70a3d64},			/* -0.43113=f(-0.46000)*/
-{13, 0,123,__LINE__, 0xbfdb1009, 0xdce51463, 0xbfdccccc, 0xccccccc0},			/* -0.42285=f(-0.45000)*/
-{13, 0,123,__LINE__, 0xbfda8747, 0xd7f49e2d, 0xbfdc28f5, 0xc28f5c1c},			/* -0.41450=f(-0.44000)*/
-{14, 0,123,__LINE__, 0xbfd9fd82, 0xb105defd, 0xbfdb851e, 0xb851eb78},			/* -0.40609=f(-0.43000)*/
-{14, 0,123,__LINE__, 0xbfd972bc, 0x9d13b9e5, 0xbfdae147, 0xae147ad4},			/* -0.39762=f(-0.42000)*/
-{14, 0,123,__LINE__, 0xbfd8e6f7, 0xf7e032a0, 0xbfda3d70, 0xa3d70a30},			/* -0.38909=f(-0.41000)*/
-{15, 0,123,__LINE__, 0xbfd85a37, 0x52e35aa0, 0xbfd99999, 0x9999998c},			/* -0.38050=f(-0.40000)*/
-{12, 0,123,__LINE__, 0xbfd7cc7d, 0x50b6ef80, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.37185=f(-0.39000)*/
-{12, 0,123,__LINE__, 0xbfd73dcc, 0xf225a680, 0xbfd851eb, 0x851eb844},			/* -0.36314=f(-0.38000)*/
-{15, 0,123,__LINE__, 0xbfd6ae29, 0x2776bf00, 0xbfd7ae14, 0x7ae147a0},			/* -0.35437=f(-0.37000)*/
-{15, 0,123,__LINE__, 0xbfd61d95, 0x30061180, 0xbfd70a3d, 0x70a3d6fc},			/* -0.34555=f(-0.36000)*/
-{14, 0,123,__LINE__, 0xbfd58c14, 0x737193c0, 0xbfd66666, 0x66666658},			/* -0.33667=f(-0.35000)*/
-{15, 0,123,__LINE__, 0xbfd4f9aa, 0xf9762600, 0xbfd5c28f, 0x5c28f5b4},			/* -0.32773=f(-0.34000)*/
-{15, 0,123,__LINE__, 0xbfd4665c, 0x2f8517e0, 0xbfd51eb8, 0x51eb8510},			/* -0.31874=f(-0.33000)*/
-{13, 0,123,__LINE__, 0xbfd3d22c, 0x4a7cb480, 0xbfd47ae1, 0x47ae146c},			/* -0.30970=f(-0.32000)*/
-{16, 0,123,__LINE__, 0xbfd33d1f, 0x9f484cc0, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30060=f(-0.31000)*/
-{15, 0,123,__LINE__, 0xbfd2a73a, 0x6c6f7c40, 0xbfd33333, 0x33333324},			/* -0.29145=f(-0.30000)*/
-{16, 0,123,__LINE__, 0xbfd21081, 0x588f2900, 0xbfd28f5c, 0x28f5c280},			/* -0.28225=f(-0.29000)*/
-{16, 0,123,__LINE__, 0xbfd178f9, 0x6cc49e40, 0xbfd1eb85, 0x1eb851dc},			/* -0.27300=f(-0.28000)*/
-{15, 0,123,__LINE__, 0xbfd0e0a7, 0x94363240, 0xbfd147ae, 0x147ae138},			/* -0.26371=f(-0.27000)*/
-{16, 0,123,__LINE__, 0xbfd04790, 0xf5fb5800, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25436=f(-0.26000)*/
-{11, 0,123,__LINE__, 0xbfcf5b76, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* -0.24497=f(-0.25000)*/
-{16, 0,123,__LINE__, 0xbfce2656, 0x840dc880, 0xbfceb851, 0xeb851e98},			/* -0.23554=f(-0.24000)*/
-{15, 0,123,__LINE__, 0xbfccefcf, 0x063f30c0, 0xbfcd70a3, 0xd70a3d50},			/* -0.22606=f(-0.23000)*/
-{13, 0,123,__LINE__, 0xbfcbb7eb, 0x9c333c80, 0xbfcc28f5, 0xc28f5c08},			/* -0.21655=f(-0.22000)*/
-{16, 0,123,__LINE__, 0xbfca7eb8, 0x55f62fc0, 0xbfcae147, 0xae147ac0},			/* -0.20699=f(-0.21000)*/
-{16, 0,123,__LINE__, 0xbfc94442, 0x06511080, 0xbfc99999, 0x99999978},			/* -0.19739=f(-0.20000)*/
-{17, 0,123,__LINE__, 0xbfc80895, 0x50b34780, 0xbfc851eb, 0x851eb830},			/* -0.18776=f(-0.19000)*/
-{15, 0,123,__LINE__, 0xbfc6cbbf, 0xe8cc1980, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17809=f(-0.18000)*/
-{17, 0,123,__LINE__, 0xbfc58dce, 0xfff6b0e0, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16839=f(-0.17000)*/
-{18, 0,123,__LINE__, 0xbfc44ed0, 0xc52f3e80, 0xbfc47ae1, 0x47ae1458},			/* -0.15865=f(-0.16000)*/
-{18, 0,123,__LINE__, 0xbfc30ed3, 0x664e2680, 0xbfc33333, 0x33333310},			/* -0.14888=f(-0.15000)*/
-{18, 0,123,__LINE__, 0xbfc1cde5, 0x53311580, 0xbfc1eb85, 0x1eb851c8},			/* -0.13909=f(-0.14000)*/
-{18, 0,123,__LINE__, 0xbfc08c15, 0x46750500, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12927=f(-0.13000)*/
-{18, 0,123,__LINE__, 0xbfbe92e4, 0xd5d09840, 0xbfbeb851, 0xeb851e71},			/* -0.11942=f(-0.12000)*/
-{18, 0,123,__LINE__, 0xbfbc0c17, 0xd70cdd40, 0xbfbc28f5, 0xc28f5be2},			/* -0.10955=f(-0.11000)*/
-{19, 0,123,__LINE__, 0xbfb983e2, 0x8660f8a0, 0xbfb99999, 0x99999953},			/* -0.09966=f(-0.00100)*/
-{15, 0,123,__LINE__, 0xbfb6fa64, 0x63cc7980, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08975=f(-0.09000)*/
-{19, 0,123,__LINE__, 0xbfb46fbc, 0xd99dc740, 0xbfb47ae1, 0x47ae1435},			/* -0.07982=f(-0.08000)*/
-{20, 0,123,__LINE__, 0xbfb1e40c, 0x83d681a0, 0xbfb1eb85, 0x1eb851a6},			/* -0.06988=f(-0.07000)*/
-{19, 0,123,__LINE__, 0xbfaeaee7, 0x31ef0d20, 0xbfaeb851, 0xeb851e2d},			/* -0.05992=f(-0.06000)*/
-{20, 0,123,__LINE__, 0xbfa99425, 0x9ffea300, 0xbfa99999, 0x9999990e},			/* -0.04995=f(-0.05000)*/
-{22, 0,123,__LINE__, 0xbfa47816, 0x2148ba40, 0xbfa47ae1, 0x47ae13ef},			/* -0.03997=f(-0.04000)*/
-{20, 0,123,__LINE__, 0xbf9eb5f6, 0x466748c0, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{24, 0,123,__LINE__, 0xbf947a2e, 0x4a3db3c0, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{25, 0,123,__LINE__, 0xbf847ab4, 0x87ae2540, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{25, 0,123,__LINE__, 0x3f847ab4, 0x87ae2540, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{24, 0,123,__LINE__, 0x3f947a2e, 0x4a3db3c0, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{20, 0,123,__LINE__, 0x3f9eb5f6, 0x466748c0, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{22, 0,123,__LINE__, 0x3fa47816, 0x2148ba40, 0x3fa47ae1, 0x47ae1508},			/* 0.03997=f(0.04000)*/
-{20, 0,123,__LINE__, 0x3fa99425, 0x9ffea300, 0x3fa99999, 0x99999a27},			/* 0.04995=f(0.05000)*/
-{19, 0,123,__LINE__, 0x3faeaee7, 0x31ef0d20, 0x3faeb851, 0xeb851f46},			/* 0.05992=f(0.06000)*/
-{20, 0,123,__LINE__, 0x3fb1e40c, 0x83d681a0, 0x3fb1eb85, 0x1eb85232},			/* 0.06988=f(0.07000)*/
-{19, 0,123,__LINE__, 0x3fb46fbc, 0xd99dc740, 0x3fb47ae1, 0x47ae14c1},			/* 0.07982=f(0.08000)*/
-{15, 0,123,__LINE__, 0x3fb6fa64, 0x63cc7980, 0x3fb70a3d, 0x70a3d750},			/* 0.08975=f(0.09000)*/
-{19, 0,123,__LINE__, 0x3fb983e2, 0x8660f8a0, 0x3fb99999, 0x999999df},			/* 0.09966=f(0.10000)*/
-{18, 0,123,__LINE__, 0x3fbc0c17, 0xd70cdd40, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10955=f(0.11000)*/
-{18, 0,123,__LINE__, 0x3fbe92e4, 0xd5d09840, 0x3fbeb851, 0xeb851efd},			/* 0.11942=f(0.12000)*/
-{18, 0,123,__LINE__, 0x3fc08c15, 0x46750500, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12927=f(0.13000)*/
-{18, 0,123,__LINE__, 0x3fc1cde5, 0x53311580, 0x3fc1eb85, 0x1eb8520e},			/* 0.13909=f(0.14000)*/
-{18, 0,123,__LINE__, 0x3fc30ed3, 0x664e2680, 0x3fc33333, 0x33333356},			/* 0.14888=f(0.15000)*/
-{18, 0,123,__LINE__, 0x3fc44ed0, 0xc52f3e80, 0x3fc47ae1, 0x47ae149e},			/* 0.15865=f(0.16000)*/
-{17, 0,123,__LINE__, 0x3fc58dce, 0xfff6b0e0, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16839=f(0.17000)*/
-{15, 0,123,__LINE__, 0x3fc6cbbf, 0xe8cc1980, 0x3fc70a3d, 0x70a3d72e},			/* 0.17809=f(0.18000)*/
-{17, 0,123,__LINE__, 0x3fc80895, 0x50b34780, 0x3fc851eb, 0x851eb876},			/* 0.18776=f(0.19000)*/
-{16, 0,123,__LINE__, 0x3fc94442, 0x06511080, 0x3fc99999, 0x999999be},			/* 0.19739=f(0.20000)*/
-{16, 0,123,__LINE__, 0x3fca7eb8, 0x55f62fc0, 0x3fcae147, 0xae147b06},			/* 0.20699=f(0.21000)*/
-{13, 0,123,__LINE__, 0x3fcbb7eb, 0x9c333c80, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21655=f(0.22000)*/
-{15, 0,123,__LINE__, 0x3fccefcf, 0x063f30c0, 0x3fcd70a3, 0xd70a3d96},			/* 0.22606=f(0.23000)*/
-{16, 0,123,__LINE__, 0x3fce2656, 0x840dc880, 0x3fceb851, 0xeb851ede},			/* 0.23554=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fcf5b76, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.24497=f(0.25000)*/
-{16, 0,123,__LINE__, 0x3fd04790, 0xf5fb5800, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25436=f(0.26000)*/
-{15, 0,123,__LINE__, 0x3fd0e0a7, 0x94363240, 0x3fd147ae, 0x147ae15b},			/* 0.26371=f(0.27000)*/
-{16, 0,123,__LINE__, 0x3fd178f9, 0x6cc49e40, 0x3fd1eb85, 0x1eb851ff},			/* 0.27300=f(0.28000)*/
-{16, 0,123,__LINE__, 0x3fd21081, 0x588f2900, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28225=f(0.29000)*/
-{15, 0,123,__LINE__, 0x3fd2a73a, 0x6c6f7c40, 0x3fd33333, 0x33333347},			/* 0.29145=f(0.30000)*/
-{16, 0,123,__LINE__, 0x3fd33d1f, 0x9f484cc0, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30060=f(0.31000)*/
-{13, 0,123,__LINE__, 0x3fd3d22c, 0x4a7cb480, 0x3fd47ae1, 0x47ae148f},			/* 0.30970=f(0.32000)*/
-{15, 0,123,__LINE__, 0x3fd4665c, 0x2f8517e0, 0x3fd51eb8, 0x51eb8533},			/* 0.31874=f(0.33000)*/
-{15, 0,123,__LINE__, 0x3fd4f9aa, 0xf9762600, 0x3fd5c28f, 0x5c28f5d7},			/* 0.32773=f(0.34000)*/
-{14, 0,123,__LINE__, 0x3fd58c14, 0x737193c0, 0x3fd66666, 0x6666667b},			/* 0.33667=f(0.35000)*/
-{15, 0,123,__LINE__, 0x3fd61d95, 0x30061180, 0x3fd70a3d, 0x70a3d71f},			/* 0.34555=f(0.36000)*/
-{15, 0,123,__LINE__, 0x3fd6ae29, 0x2776bf00, 0x3fd7ae14, 0x7ae147c3},			/* 0.35437=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fd73dcc, 0xf225a680, 0x3fd851eb, 0x851eb867},			/* 0.36314=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3fd7cc7d, 0x50b6ef80, 0x3fd8f5c2, 0x8f5c290b},			/* 0.37185=f(0.39000)*/
-{15, 0,123,__LINE__, 0x3fd85a37, 0x52e35aa0, 0x3fd99999, 0x999999af},			/* 0.38050=f(0.40000)*/
-{14, 0,123,__LINE__, 0x3fd8e6f7, 0xf7e032a0, 0x3fda3d70, 0xa3d70a53},			/* 0.38909=f(0.41000)*/
-{14, 0,123,__LINE__, 0x3fd972bc, 0x9d13b9e5, 0x3fdae147, 0xae147af7},			/* 0.39762=f(0.42000)*/
-{14, 0,123,__LINE__, 0x3fd9fd82, 0xb105defd, 0x3fdb851e, 0xb851eb9b},			/* 0.40609=f(0.43000)*/
-{13, 0,123,__LINE__, 0x3fda8747, 0xd7f49e2d, 0x3fdc28f5, 0xc28f5c3f},			/* 0.41450=f(0.44000)*/
-{13, 0,123,__LINE__, 0x3fdb1009, 0xdce51463, 0x3fdccccc, 0xcccccce3},			/* 0.42285=f(0.45000)*/
-{13, 0,123,__LINE__, 0x3fdb97c6, 0xec3383f5, 0x3fdd70a3, 0xd70a3d87},			/* 0.43113=f(0.46000)*/
-{14, 0,123,__LINE__, 0x3fdc1e7d, 0x1f8f11f0, 0x3fde147a, 0xe147ae2b},			/* 0.43936=f(0.47000)*/
-{14, 0,123,__LINE__, 0x3fdca42a, 0xcd1ebc0a, 0x3fdeb851, 0xeb851ecf},			/* 0.44751=f(0.48000)*/
-{14, 0,123,__LINE__, 0x3fdd28ce, 0xa41ae9c9, 0x3fdf5c28, 0xf5c28f73},			/* 0.45561=f(0.49000)*/
-{10, 0,123,__LINE__, 0x3fddac67, 0x133304db, 0x3fe00000, 0x0000000b},			/* 0.46364=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fde2ef3, 0x066ab640, 0x3fe051eb, 0x851eb85d},			/* 0.47161=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fdeb071, 0x9e18ea06, 0x3fe0a3d7, 0x0a3d70af},			/* 0.47951=f(0.52000)*/
-{10, 0,123,__LINE__, 0x3fdf30e1, 0xf58d3f1e, 0x3fe0f5c2, 0x8f5c2901},			/* 0.48735=f(0.53000)*/
-{10, 0,123,__LINE__, 0x3fdfb043, 0x6ef23d12, 0x3fe147ae, 0x147ae153},			/* 0.49513=f(0.54000)*/
-{15, 0,123,__LINE__, 0x3fe0174a, 0xa8ef77cf, 0x3fe19999, 0x999999a5},			/* 0.50284=f(0.55000)*/
-{15, 0,123,__LINE__, 0x3fe055eb, 0x9964e91c, 0x3fe1eb85, 0x1eb851f7},			/* 0.51048=f(0.56000)*/
-{14, 0,123,__LINE__, 0x3fe09404, 0x778b2a8c, 0x3fe23d70, 0xa3d70a49},			/* 0.51806=f(0.57000)*/
-{14, 0,123,__LINE__, 0x3fe0d195, 0x0c70aa84, 0x3fe28f5c, 0x28f5c29b},			/* 0.52558=f(0.58000)*/
-{14, 0,123,__LINE__, 0x3fe10e9d, 0x7e7f3fbb, 0x3fe2e147, 0xae147aed},			/* 0.53303=f(0.59000)*/
-{14, 0,123,__LINE__, 0x3fe14b1d, 0xde10c1f6, 0x3fe33333, 0x3333333f},			/* 0.54041=f(0.60000)*/
-{14, 0,123,__LINE__, 0x3fe18716, 0x19161382, 0x3fe3851e, 0xb851eb91},			/* 0.54774=f(0.61000)*/
-{14, 0,123,__LINE__, 0x3fe1c286, 0x6531e75a, 0x3fe3d70a, 0x3d70a3e3},			/* 0.55499=f(0.62000)*/
-{13, 0,123,__LINE__, 0x3fe1fd6f, 0x0a84c353, 0x3fe428f5, 0xc28f5c35},			/* 0.56218=f(0.63000)*/
-{13, 0,123,__LINE__, 0x3fe237d0, 0x460f2953, 0x3fe47ae1, 0x47ae1487},			/* 0.56931=f(0.64000)*/
-{13, 0,123,__LINE__, 0x3fe271aa, 0x6ee11b45, 0x3fe4cccc, 0xccccccd9},			/* 0.57637=f(0.65000)*/
-{13, 0,123,__LINE__, 0x3fe2aafd, 0xe986dd76, 0x3fe51eb8, 0x51eb852b},			/* 0.58337=f(0.66000)*/
-{13, 0,123,__LINE__, 0x3fe2e3cb, 0x01e4390e, 0x3fe570a3, 0xd70a3d7d},			/* 0.59030=f(0.67000)*/
-{13, 0,123,__LINE__, 0x3fe31c12, 0x3e930158, 0x3fe5c28f, 0x5c28f5cf},			/* 0.59717=f(0.68000)*/
-{13, 0,123,__LINE__, 0x3fe353d4, 0x193fe9ed, 0x3fe6147a, 0xe147ae21},			/* 0.60398=f(0.69000)*/
-{13, 0,123,__LINE__, 0x3fe38b11, 0x2c1e201f, 0x3fe66666, 0x66666673},			/* 0.61072=f(0.70000)*/
-{13, 0,123,__LINE__, 0x3fe3c1c9, 0xf6f0d59c, 0x3fe6b851, 0xeb851ec5},			/* 0.61740=f(0.71000)*/
-{13, 0,123,__LINE__, 0x3fe3f7ff, 0x3959c7d8, 0x3fe70a3d, 0x70a3d717},			/* 0.62402=f(0.72000)*/
-{14, 0,123,__LINE__, 0x3fe42db1, 0x6e1b3f75, 0x3fe75c28, 0xf5c28f69},			/* 0.63057=f(0.73000)*/
-{14, 0,123,__LINE__, 0x3fe462e1, 0x5335bbc3, 0x3fe7ae14, 0x7ae147bb},			/* 0.63707=f(0.74000)*/
-{14, 0,123,__LINE__, 0x3fe4978f, 0xa1fb0886, 0x3fe80000, 0x0000000d},			/* 0.64350=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe4cbbd, 0x15582c7e, 0x3fe851eb, 0x851eb85f},			/* 0.64987=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe4ff6a, 0x7f7bb194, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.65617=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe53298, 0x96200713, 0x3fe8f5c2, 0x8f5c2903},			/* 0.66242=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe56548, 0x4e320115, 0x3fe947ae, 0x147ae155},			/* 0.66861=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe5977a, 0x54a52e38, 0x3fe99999, 0x999999a7},			/* 0.67474=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe5c92f, 0x9b0e5152, 0x3fe9eb85, 0x1eb851f9},			/* 0.68080=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3fe5fa69, 0x00056d81, 0x3fea3d70, 0xa3d70a4b},			/* 0.68681=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3fe62b27, 0x6d01d27f, 0x3fea8f5c, 0x28f5c29d},			/* 0.69276=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3fe65b6b, 0xd188e9f3, 0x3feae147, 0xae147aef},			/* 0.69865=f(0.84000)*/
-{12, 0,123,__LINE__, 0x3fe68b37, 0x2a6ebef1, 0x3feb3333, 0x33333341},			/* 0.70449=f(0.85000)*/
-{12, 0,123,__LINE__, 0x3fe6ba8a, 0x482e8074, 0x3feb851e, 0xb851eb93},			/* 0.71027=f(0.86000)*/
-{12, 0,123,__LINE__, 0x3fe6e966, 0x33acb528, 0x3febd70a, 0x3d70a3e5},			/* 0.71599=f(0.87000)*/
-{12, 0,123,__LINE__, 0x3fe717cb, 0xe7ed10e9, 0x3fec28f5, 0xc28f5c37},			/* 0.72165=f(0.88000)*/
-{12, 0,123,__LINE__, 0x3fe745bc, 0x62166aea, 0x3fec7ae1, 0x47ae1489},			/* 0.72726=f(0.89000)*/
-{12, 0,123,__LINE__, 0x3fe77338, 0xa16457bc, 0x3feccccc, 0xccccccdb},			/* 0.73281=f(0.90000)*/
-{12, 0,123,__LINE__, 0x3fe7a041, 0xb8a10028, 0x3fed1eb8, 0x51eb852d},			/* 0.73831=f(0.91000)*/
-{12, 0,123,__LINE__, 0x3fe7ccd8, 0x87ca915d, 0x3fed70a3, 0xd70a3d7f},			/* 0.74375=f(0.92000)*/
-{12, 0,123,__LINE__, 0x3fe7f8fe, 0x26e8534c, 0x3fedc28f, 0x5c28f5d1},			/* 0.74914=f(0.93000)*/
-{13, 0,123,__LINE__, 0x3fe824b3, 0x9f766e2d, 0x3fee147a, 0xe147ae23},			/* 0.75448=f(0.94000)*/
-{13, 0,123,__LINE__, 0x3fe84ff9, 0xf77706bc, 0x3fee6666, 0x66666675},			/* 0.75976=f(0.95000)*/
-{13, 0,123,__LINE__, 0x3fe87ad2, 0x395f26bf, 0x3feeb851, 0xeb851ec7},			/* 0.76499=f(0.96000)*/
-{13, 0,123,__LINE__, 0x3fe8a53d, 0x810df2de, 0x3fef0a3d, 0x70a3d719},			/* 0.77017=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3fe8cf3c, 0xb73a3b37, 0x3fef5c28, 0xf5c28f6b},			/* 0.77529=f(0.98000)*/
-{13, 0,123,__LINE__, 0x3fe8f8d0, 0xf9bf1e5c, 0x3fefae14, 0x7ae147bd},			/* 0.78037=f(0.99000)*/
-{13, 0,123,__LINE__, 0x3fe921fb, 0x54442d18, 0x3ff00000, 0x00000007},			/* 0.78539=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fe94abc, 0xd32a21dc, 0x3ff028f5, 0xc28f5c30},			/* 0.79037=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3fe97316, 0x83352f94, 0x3ff051eb, 0x851eb859},			/* 0.79529=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fe99b09, 0x7047b825, 0x3ff07ae1, 0x47ae1482},			/* 0.80017=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fe9c296, 0xa60875e6, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.80500=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3fe9e9bf, 0x30abbe1d, 0x3ff0cccc, 0xccccccd4},			/* 0.80978=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3fea1084, 0x1aeb18ae, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.81451=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fea36e6, 0x8c891b33, 0x3ff11eb8, 0x51eb8526},			/* 0.81920=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fea5ce7, 0x53d5c48d, 0x3ff147ae, 0x147ae14f},			/* 0.82384=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fea8287, 0x94f6bb43, 0x3ff170a3, 0xd70a3d78},			/* 0.82843=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3feaa7c8, 0x5a1121a9, 0x3ff19999, 0x999999a1},			/* 0.83298=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3feaccaa, 0xa707e18c, 0x3ff1c28f, 0x5c28f5ca},			/* 0.83748=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3feaf12f, 0x834a84a7, 0x3ff1eb85, 0x1eb851f3},			/* 0.84194=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3feb1557, 0xf23cdf13, 0x3ff2147a, 0xe147ae1c},			/* 0.84635=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3feb3924, 0xf3e86154, 0x3ff23d70, 0xa3d70a45},			/* 0.85072=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3feb5c97, 0x88c89da5, 0x3ff26666, 0x6666666e},			/* 0.85505=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3feb7fb0, 0xb4e51557, 0x3ff28f5c, 0x28f5c297},			/* 0.85933=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3feba271, 0x6d27a852, 0x3ff2b851, 0xeb851ec0},			/* 0.86357=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3febc4da, 0xb84ba54b, 0x3ff2e147, 0xae147ae9},			/* 0.86778=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3febe6ed, 0x9fbacab8, 0x3ff30a3d, 0x70a3d712},			/* 0.87193=f(1.19000)*/
-{12, 0,123,__LINE__, 0xbff69b81, 0x570da865, 0xc01921fb, 0x54442d18},			/* -1.41296=f(-6.28318)*/
-{12, 0,123,__LINE__, 0xbff5c97d, 0x3a56b9b2, 0xc012d97c, 0x7f3321d2},			/* -1.36169=f(-4.71238)*/
-{12, 0,123,__LINE__, 0xbff433b8, 0xa19dfff7, 0xc00921fb, 0x54442d18},			/* -1.26262=f(-3.14159)*/
-{12, 0,123,__LINE__, 0xbff00fe9, 0x8afa9c80, 0xbff921fb, 0x54442d18},			/* -1.00388=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{12, 0,123,__LINE__, 0x3ff00fe9, 0x8afa9c80, 0x3ff921fb, 0x54442d18},			/* 1.00388=f(1.57079)*/
-{12, 0,123,__LINE__, 0x3ff433b8, 0xa19dfff7, 0x400921fb, 0x54442d18},			/* 1.26262=f(3.14159)*/
-{12, 0,123,__LINE__, 0x3ff5c97d, 0x3a56b9b2, 0x4012d97c, 0x7f3321d2},			/* 1.36169=f(4.71238)*/
-{13, 0,123,__LINE__, 0xbff8997f, 0xbbbba48f, 0xc03e0000, 0x00000000},			/* -1.53747=f(-30.0000)*/
-{13, 0,123,__LINE__, 0xbff8914e, 0x955e1aaa, 0xc03c4ccc, 0xcccccccd},			/* -1.53547=f(-28.3000)*/
-{13, 0,123,__LINE__, 0xbff88811, 0xbbfd6b12, 0xc03a9999, 0x9999999a},			/* -1.53322=f(-26.6000)*/
-{13, 0,123,__LINE__, 0xbff87d92, 0x768b02b8, 0xc038e666, 0x66666667},			/* -1.53065=f(-24.9000)*/
-{13, 0,123,__LINE__, 0xbff8718a, 0x0cc8d586, 0xc0373333, 0x33333334},			/* -1.52771=f(-23.2000)*/
-{13, 0,123,__LINE__, 0xbff8639b, 0x7979c1ee, 0xc0358000, 0x00000001},			/* -1.52431=f(-21.5000)*/
-{13, 0,123,__LINE__, 0xbff85349, 0xe6fa07f8, 0xc033cccc, 0xccccccce},			/* -1.52033=f(-19.8000)*/
-{13, 0,123,__LINE__, 0xbff83fe9, 0xca804f95, 0xc0321999, 0x9999999b},			/* -1.51560=f(-18.1000)*/
-{13, 0,123,__LINE__, 0xbff82888, 0xd5407d4a, 0xc0306666, 0x66666668},			/* -1.50989=f(-16.4000)*/
-{13, 0,123,__LINE__, 0xbff80bc5, 0x5c158b94, 0xc02d6666, 0x6666666a},			/* -1.50287=f(-14.7000)*/
-{12, 0,123,__LINE__, 0xbff7e786, 0x2ba6a33f, 0xc02a0000, 0x00000004},			/* -1.49402=f(-13.0000)*/
-{12, 0,123,__LINE__, 0xbff7b872, 0x1b2df4ce, 0xc0269999, 0x9999999e},			/* -1.48253=f(-11.3000)*/
-{12, 0,123,__LINE__, 0xbff778d9, 0x2c5f9933, 0xc0233333, 0x33333338},			/* -1.46700=f(-9.60000)*/
-{12, 0,123,__LINE__, 0xbff71e3e, 0x5dfda460, 0xc01f9999, 0x999999a3},			/* -1.44488=f(-7.90000)*/
-{12, 0,123,__LINE__, 0xbff692fa, 0x43fa5e18, 0xc018cccc, 0xccccccd6},			/* -1.41088=f(-6.20000)*/
-{12, 0,123,__LINE__, 0xbff5a250, 0x54442d18, 0xc0120000, 0x00000009},			/* -1.35212=f(-4.50000)*/
-{12, 0,123,__LINE__, 0xbff3a4f4, 0xa6207454, 0xc0066666, 0x66666678},			/* -1.22777=f(-2.80000)*/
-{11, 0,123,__LINE__, 0xbfeaa7c8, 0x5a1121a9, 0xbff19999, 0x999999bd},			/* -0.83298=f(-1.10000)*/
-{14, 0,123,__LINE__, 0x3fe14b1d, 0xde10c1f6, 0x3fe33333, 0x333332ec},			/* 0.54041=f(0.60000)*/
-{12, 0,123,__LINE__, 0x3ff29219, 0x9c41e5ee, 0x40026666, 0x66666654},			/* 1.16066=f(2.30000)*/
-{12, 0,123,__LINE__, 0x3ff5368c, 0x94442d18, 0x400fffff, 0xffffffee},			/* 1.32581=f(4.00000)*/
-{12, 0,123,__LINE__, 0x3ff65a9f, 0xe0bdccd7, 0x4016cccc, 0xccccccc4},			/* 1.39712=f(5.70000)*/
-{12, 0,123,__LINE__, 0x3ff6fbcd, 0x190e2940, 0x401d9999, 0x99999991},			/* 1.43647=f(7.40000)*/
-{12, 0,123,__LINE__, 0x3ff761ab, 0xb2554627, 0x40223333, 0x3333332f},			/* 1.46134=f(9.10000)*/
-{12, 0,123,__LINE__, 0x3ff7a7cd, 0x02099027, 0x40259999, 0x99999995},			/* 1.47846=f(10.8000)*/
-{12, 0,123,__LINE__, 0x3ff7daff, 0x862fb237, 0x4028ffff, 0xfffffffb},			/* 1.49096=f(12.5000)*/
-{13, 0,123,__LINE__, 0x3ff80201, 0xa8f876a2, 0x402c6666, 0x66666661},			/* 1.50049=f(14.2000)*/
-{13, 0,123,__LINE__, 0x3ff820b5, 0xe6942ae9, 0x402fcccc, 0xccccccc7},			/* 1.50798=f(15.9000)*/
-{13, 0,123,__LINE__, 0x3ff83981, 0x22f5cde4, 0x40319999, 0x99999997},			/* 1.51403=f(17.6000)*/
-{13, 0,123,__LINE__, 0x3ff84df1, 0x80fb3284, 0x40334ccc, 0xccccccca},			/* 1.51902=f(19.3000)*/
-{13, 0,123,__LINE__, 0x3ff85f14, 0xd4442d18, 0x4034ffff, 0xfffffffd},			/* 1.52321=f(21.0000)*/
-{13, 0,123,__LINE__, 0x3ff86da8, 0x66b52257, 0x4036b333, 0x33333330},			/* 1.52677=f(22.7000)*/
-{13, 0,123,__LINE__, 0x3ff87a34, 0xefc43c34, 0x40386666, 0x66666663},			/* 1.52983=f(24.4000)*/
-{13, 0,123,__LINE__, 0x3ff8851f, 0xa5b433e2, 0x403a1999, 0x99999996},			/* 1.53250=f(26.1000)*/
-{13, 0,123,__LINE__, 0x3ff88eb5, 0x0612c894, 0x403bcccc, 0xccccccc9},			/* 1.53484=f(27.8000)*/
-{13, 0,123,__LINE__, 0x3ff8972f, 0xfbdc0a62, 0x403d7fff, 0xfffffffc},			/* 1.53691=f(29.5000)*/
-0,};
-test_atanf(m)   {run_vector_1(m,atanf_vec,(char *)(atanf),"atanf","ff");   }	
diff --git a/newlib/libm/test/atanh_vec.c b/newlib/libm/test/atanh_vec.c
deleted file mode 100644
index 3b5384957..000000000
--- a/newlib/libm/test/atanh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type atanh_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xc0325e4f, 0x7b2737fa, 0xbfefffff, 0xfffffffe},			/* -18.3684=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xc0052c58, 0x1997cd6c, 0xbfefae14, 0x7ae147ac},			/* -2.64665=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xc0026167, 0x19161d1e, 0xbfef5c28, 0xf5c28f5a},			/* -2.29756=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xc000bd05, 0x89d8e2f5, 0xbfef0a3d, 0x70a3d708},			/* -2.09229=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfff2272, 0xae325a49, 0xbfeeb851, 0xeb851eb6},			/* -1.94591=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbffd4ef9, 0x68880dca, 0xbfee6666, 0x66666664},			/* -1.83178=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbffbcf0c, 0xd4741660, 0xbfee147a, 0xe147ae12},			/* -1.73804=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbffa88c3, 0xf9396f8f, 0xbfedc28f, 0x5c28f5c0},			/* -1.65839=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbff96ca7, 0x7c922cf0, 0xbfed70a3, 0xd70a3d6e},			/* -1.58902=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbff870bd, 0x73abde61, 0xbfed1eb8, 0x51eb851c},			/* -1.52752=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbff78e36, 0x0604b325, 0xbfeccccc, 0xccccccca},			/* -1.47221=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbff6c035, 0x579d7a69, 0xbfec7ae1, 0x47ae1478},			/* -1.42192=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbff60324, 0xf23a6f2b, 0xbfec28f5, 0xc28f5c26},			/* -1.37576=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbff5544b, 0x4e482a6e, 0xbfebd70a, 0x3d70a3d4},			/* -1.33308=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbff4b18a, 0x2ece7fae, 0xbfeb851e, 0xb851eb82},			/* -1.29334=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbff41933, 0xb0e44632, 0xbfeb3333, 0x33333330},			/* -1.25615=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbff389ed, 0x3e13256f, 0xbfeae147, 0xae147ade},			/* -1.22117=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbff3029b, 0x5180da20, 0xbfea8f5c, 0x28f5c28c},			/* -1.18813=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbff28253, 0x079db66d, 0xbfea3d70, 0xa3d70a3a},			/* -1.15681=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbff2084f, 0x96886b24, 0xbfe9eb85, 0x1eb851e8},			/* -1.12702=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbff193ea, 0x7aad0306, 0xbfe99999, 0x99999996},			/* -1.09861=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbff12495, 0x8caee1fa, 0xbfe947ae, 0x147ae144},			/* -1.07143=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbff0b9d6, 0x77ddde9c, 0xbfe8f5c2, 0x8f5c28f2},			/* -1.04537=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbff05343, 0x33132082, 0xbfe8a3d7, 0x0a3d70a0},			/* -1.02032=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfefe0fe, 0x73ce887b, 0xbfe851eb, 0x851eb84e},			/* -0.99621=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfef2272, 0xae325a4e, 0xbfe7ffff, 0xfffffffc},			/* -0.97295=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfee6a53, 0xbbe5e69d, 0xbfe7ae14, 0x7ae147aa},			/* -0.95047=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfedb822, 0x730ae0f2, 0xbfe75c28, 0xf5c28f58},			/* -0.92872=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfed0b6d, 0x7df77dc2, 0xbfe70a3d, 0x70a3d706},			/* -0.90764=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfec63cf, 0x69c77028, 0xbfe6b851, 0xeb851eb4},			/* -0.88718=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfebc0ed, 0x0947fbe0, 0xbfe66666, 0x66666662},			/* -0.86730=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfeb2274, 0x1ba3da88, 0xbfe6147a, 0xe147ae10},			/* -0.84795=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfea881a, 0x29e5236a, 0xbfe5c28f, 0x5c28f5be},			/* -0.82911=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe9f19b, 0x912bebd0, 0xbfe570a3, 0xd70a3d6c},			/* -0.81074=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe95eba, 0xb196930b, 0xbfe51eb8, 0x51eb851a},			/* -0.79281=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe8cf3f, 0x3b791742, 0xbfe4cccc, 0xccccccc8},			/* -0.77529=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe842f5, 0x95c3527e, 0xbfe47ae1, 0x47ae1476},			/* -0.75817=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe7b9ae, 0x5971c669, 0xbfe428f5, 0xc28f5c24},			/* -0.74141=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe7333d, 0xdeaaa5c9, 0xbfe3d70a, 0x3d70a3d2},			/* -0.72500=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe6af7b, 0xd8c5a683, 0xbfe3851e, 0xb851eb80},			/* -0.70892=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe62e42, 0xfefa39e7, 0xbfe33333, 0x3333332e},			/* -0.69314=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe5af70, 0xbfd423bd, 0xbfe2e147, 0xae147adc},			/* -0.67766=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe532e4, 0xfddf6862, 0xbfe28f5c, 0x28f5c28a},			/* -0.66246=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe4b881, 0xd43e4948, 0xbfe23d70, 0xa3d70a38},			/* -0.64752=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe4402b, 0x6211ad0d, 0xbfe1eb85, 0x1eb851e6},			/* -0.63283=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe3c9c7, 0x9bc85097, 0xbfe19999, 0x99999994},			/* -0.61838=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe3553e, 0x218d6107, 0xbfe147ae, 0x147ae142},			/* -0.60415=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe2e278, 0x1a2d2394, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.59014=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe27160, 0x11df464f, 0xbfe0a3d7, 0x0a3d709e},			/* -0.57633=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe201e1, 0xdc7b4c95, 0xbfe051eb, 0x851eb84c},			/* -0.56272=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfe193ea, 0x7aad0302, 0xbfdfffff, 0xfffffff4},			/* -0.54930=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfe12768, 0x01cd9aae, 0xbfdf5c28, 0xf5c28f50},			/* -0.53606=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfe0bc49, 0x861276d0, 0xbfdeb851, 0xeb851eac},			/* -0.52298=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfe0527f, 0x06cd3e5c, 0xbfde147a, 0xe147ae08},			/* -0.51007=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdfd3f2, 0xb9036ce2, 0xbfdd70a3, 0xd70a3d64},			/* -0.49731=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdf0554, 0x513b1b3c, 0xbfdccccc, 0xccccccc0},			/* -0.48470=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfde3907, 0x8d49915a, 0xbfdc28f5, 0xc28f5c1c},			/* -0.47223=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdd6ef2, 0x7d563b9c, 0xbfdb851e, 0xb851eb78},			/* -0.45989=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdca6fc, 0x71eebdbc, 0xbfdae147, 0xae147ad4},			/* -0.44769=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfdbe10d, 0xe5647d18, 0xbfda3d70, 0xa3d70a30},			/* -0.43561=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfdb1d10, 0x670aae89, 0xbfd99999, 0x9999998c},			/* -0.42364=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfda5aee, 0x8824f81b, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41180=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd99a93, 0xca5c285e, 0xbfd851eb, 0x851eb844},			/* -0.40005=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd8dbec, 0x8f9343fd, 0xbfd7ae14, 0x7ae147a0},			/* -0.38842=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd81ee6, 0x0afb500a, 0xbfd70a3d, 0x70a3d6fc},			/* -0.37688=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd7636e, 0x3347e0eb, 0xbfd66666, 0x66666658},			/* -0.36544=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd6a973, 0xb5e9a616, 0xbfd5c28f, 0x5c28f5b4},			/* -0.35409=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd5f0e5, 0xeb36f7e5, 0xbfd51eb8, 0x51eb8510},			/* -0.34282=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd539b4, 0xcb6ce54c, 0xbfd47ae1, 0x47ae146c},			/* -0.33164=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd483d0, 0xe4756d2d, 0xbfd3d70a, 0x3d70a3c8},			/* -0.32054=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd3cf2b, 0x50617c84, 0xbfd33333, 0x33333324},			/* -0.30951=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd31bb5, 0xac870001, 0xbfd28f5c, 0x28f5c280},			/* -0.29856=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd26962, 0x1134db82, 0xbfd1eb85, 0x1eb851dc},			/* -0.28768=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd1b823, 0x09eff2ce, 0xbfd147ae, 0x147ae138},			/* -0.27686=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd107eb, 0x8e2da1d3, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26610=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfd058ae, 0xfa811441, 0xbfcfffff, 0xffffffe0},			/* -0.25541=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfcf54c2, 0x1463c149, 0xbfceb851, 0xeb851e98},			/* -0.24477=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcdf9eb, 0xa2664aba, 0xbfcd70a3, 0xd70a3d50},			/* -0.23418=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcca0c3, 0x6ce651f9, 0xbfcc28f5, 0xc28f5c08},			/* -0.22365=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcb4932, 0xdcf85d69, 0xbfcae147, 0xae147ac0},			/* -0.21317=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc9f323, 0xecbf9829, 0xbfc99999, 0x99999978},			/* -0.20273=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc89e81, 0x1dcd345f, 0xbfc851eb, 0x851eb830},			/* -0.19233=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc74b35, 0x6ffd34fb, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18198=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5f92c, 0x58c6329f, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17166=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc4a851, 0xbaf27b4a, 0xbfc47ae1, 0x47ae1458},			/* -0.16138=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc35891, 0xdeb9a38e, 0xbfc33333, 0x33333310},			/* -0.15114=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc209d9, 0x6a3244e1, 0xbfc1eb85, 0x1eb851c8},			/* -0.14092=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0bc15, 0x5a143877, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13073=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbede65, 0xf5884573, 0xbfbeb851, 0xeb851e71},			/* -0.12058=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc463f, 0xc3433519, 0xbfbc28f5, 0xc28f5be2},			/* -0.11044=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb9af93, 0xcd2343ca, 0xbfb99999, 0x99999953},			/* -0.10033=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb71a3e, 0x3b7f08b7, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09024=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb4861b, 0xa31d09b8, 0xbfb47ae1, 0x47ae1435},			/* -0.08017=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1f308, 0xf96e1d35, 0xbfb1eb85, 0x1eb851a6},			/* -0.07011=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaec1c7, 0x12297e00, 0xbfaeb851, 0xeb851e2d},			/* -0.06007=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99f11, 0xcd5f7005, 0xbfa99999, 0x9999990e},			/* -0.05004=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47dad, 0xcbbdb9f7, 0xbfa47ae1, 0x47ae13ef},			/* -0.04002=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9ebaae, 0x39e3f8da, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947b94, 0x47a9a8d9, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847b0e, 0x059d0364, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847b0e, 0x059d07c9, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947b94, 0x47a9ab0b, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9ebaae, 0x39e3fb0d, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47dad, 0xcbbdbb10, 0x3fa47ae1, 0x47ae1508},			/* 0.04002=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99f11, 0xcd5f711e, 0x3fa99999, 0x99999a27},			/* 0.05004=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faec1c7, 0x12297f19, 0x3faeb851, 0xeb851f46},			/* 0.06007=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1f308, 0xf96e1dc1, 0x3fb1eb85, 0x1eb85232},			/* 0.07011=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb4861b, 0xa31d0a44, 0x3fb47ae1, 0x47ae14c1},			/* 0.08017=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb71a3e, 0x3b7f0945, 0x3fb70a3d, 0x70a3d750},			/* 0.09024=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb9af93, 0xcd234458, 0x3fb99999, 0x999999df},			/* 0.10033=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc463f, 0xc34335a8, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11044=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbede65, 0xf5884602, 0x3fbeb851, 0xeb851efd},			/* 0.12058=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0bc15, 0x5a1438be, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13073=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc209d9, 0x6a324529, 0x3fc1eb85, 0x1eb8520e},			/* 0.14092=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc35891, 0xdeb9a3d6, 0x3fc33333, 0x33333356},			/* 0.15114=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc4a851, 0xbaf27b93, 0x3fc47ae1, 0x47ae149e},			/* 0.16138=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5f92c, 0x58c632e8, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17166=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc74b35, 0x6ffd3544, 0x3fc70a3d, 0x70a3d72e},			/* 0.18198=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc89e81, 0x1dcd34a8, 0x3fc851eb, 0x851eb876},			/* 0.19233=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc9f323, 0xecbf9873, 0x3fc99999, 0x999999be},			/* 0.20273=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcb4932, 0xdcf85db2, 0x3fcae147, 0xae147b06},			/* 0.21317=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcca0c3, 0x6ce65244, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22365=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcdf9eb, 0xa2664b04, 0x3fcd70a3, 0xd70a3d96},			/* 0.23418=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fcf54c2, 0x1463c194, 0x3fceb851, 0xeb851ede},			/* 0.24477=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd058ae, 0xfa811466, 0x3fd00000, 0x00000013},			/* 0.25541=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd107eb, 0x8e2da1f9, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26610=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd1b823, 0x09eff2f4, 0x3fd147ae, 0x147ae15b},			/* 0.27686=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd26962, 0x1134dba8, 0x3fd1eb85, 0x1eb851ff},			/* 0.28768=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd31bb5, 0xac870027, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29856=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd3cf2b, 0x50617cab, 0x3fd33333, 0x33333347},			/* 0.30951=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd483d0, 0xe4756d55, 0x3fd3d70a, 0x3d70a3eb},			/* 0.32054=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd539b4, 0xcb6ce573, 0x3fd47ae1, 0x47ae148f},			/* 0.33164=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd5f0e5, 0xeb36f80c, 0x3fd51eb8, 0x51eb8533},			/* 0.34282=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd6a973, 0xb5e9a63e, 0x3fd5c28f, 0x5c28f5d7},			/* 0.35409=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd7636e, 0x3347e113, 0x3fd66666, 0x6666667b},			/* 0.36544=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd81ee6, 0x0afb5032, 0x3fd70a3d, 0x70a3d71f},			/* 0.37688=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd8dbec, 0x8f934427, 0x3fd7ae14, 0x7ae147c3},			/* 0.38842=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd99a93, 0xca5c2887, 0x3fd851eb, 0x851eb867},			/* 0.40005=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fda5aee, 0x8824f845, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41180=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fdb1d10, 0x670aaeb4, 0x3fd99999, 0x999999af},			/* 0.42364=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fdbe10d, 0xe5647d43, 0x3fda3d70, 0xa3d70a53},			/* 0.43561=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fdca6fc, 0x71eebde8, 0x3fdae147, 0xae147af7},			/* 0.44769=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdd6ef2, 0x7d563bc7, 0x3fdb851e, 0xb851eb9b},			/* 0.45989=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fde3907, 0x8d499187, 0x3fdc28f5, 0xc28f5c3f},			/* 0.47223=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdf0554, 0x513b1b68, 0x3fdccccc, 0xcccccce3},			/* 0.48470=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdfd3f2, 0xb9036d0f, 0x3fdd70a3, 0xd70a3d87},			/* 0.49731=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fe0527f, 0x06cd3e73, 0x3fde147a, 0xe147ae2b},			/* 0.51007=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fe0bc49, 0x861276e8, 0x3fdeb851, 0xeb851ecf},			/* 0.52298=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe12768, 0x01cd9ac5, 0x3fdf5c28, 0xf5c28f73},			/* 0.53606=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe193ea, 0x7aad0319, 0x3fe00000, 0x0000000b},			/* 0.54930=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe201e1, 0xdc7b4cac, 0x3fe051eb, 0x851eb85d},			/* 0.56272=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe27160, 0x11df4666, 0x3fe0a3d7, 0x0a3d70af},			/* 0.57633=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe2e278, 0x1a2d23ac, 0x3fe0f5c2, 0x8f5c2901},			/* 0.59014=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe3553e, 0x218d611e, 0x3fe147ae, 0x147ae153},			/* 0.60415=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe3c9c7, 0x9bc850af, 0x3fe19999, 0x999999a5},			/* 0.61838=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe4402b, 0x6211ad26, 0x3fe1eb85, 0x1eb851f7},			/* 0.63283=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe4b881, 0xd43e4961, 0x3fe23d70, 0xa3d70a49},			/* 0.64752=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe532e4, 0xfddf687c, 0x3fe28f5c, 0x28f5c29b},			/* 0.66246=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe5af70, 0xbfd423d7, 0x3fe2e147, 0xae147aed},			/* 0.67766=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe62e42, 0xfefa3a02, 0x3fe33333, 0x3333333f},			/* 0.69314=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe6af7b, 0xd8c5a69e, 0x3fe3851e, 0xb851eb91},			/* 0.70892=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe7333d, 0xdeaaa5e5, 0x3fe3d70a, 0x3d70a3e3},			/* 0.72500=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe7b9ae, 0x5971c685, 0x3fe428f5, 0xc28f5c35},			/* 0.74141=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe842f5, 0x95c3529b, 0x3fe47ae1, 0x47ae1487},			/* 0.75817=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe8cf3f, 0x3b791760, 0x3fe4cccc, 0xccccccd9},			/* 0.77529=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe95eba, 0xb1969328, 0x3fe51eb8, 0x51eb852b},			/* 0.79281=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe9f19b, 0x912bebee, 0x3fe570a3, 0xd70a3d7d},			/* 0.81074=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fea881a, 0x29e5238a, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82911=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3feb2274, 0x1ba3daa8, 0x3fe6147a, 0xe147ae21},			/* 0.84795=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3febc0ed, 0x0947fc02, 0x3fe66666, 0x66666673},			/* 0.86730=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fec63cf, 0x69c7704a, 0x3fe6b851, 0xeb851ec5},			/* 0.88718=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fed0b6d, 0x7df77de5, 0x3fe70a3d, 0x70a3d717},			/* 0.90764=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fedb822, 0x730ae116, 0x3fe75c28, 0xf5c28f69},			/* 0.92872=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fee6a53, 0xbbe5e6c3, 0x3fe7ae14, 0x7ae147bb},			/* 0.95047=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fef2272, 0xae325a75, 0x3fe80000, 0x0000000d},			/* 0.97295=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fefe0fe, 0x73ce88a3, 0x3fe851eb, 0x851eb85f},			/* 0.99621=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3ff05343, 0x33132097, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.02032=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3ff0b9d6, 0x77dddeb2, 0x3fe8f5c2, 0x8f5c2903},			/* 1.04537=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3ff12495, 0x8caee211, 0x3fe947ae, 0x147ae155},			/* 1.07143=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3ff193ea, 0x7aad031d, 0x3fe99999, 0x999999a7},			/* 1.09861=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3ff2084f, 0x96886b3c, 0x3fe9eb85, 0x1eb851f9},			/* 1.12702=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3ff28253, 0x079db687, 0x3fea3d70, 0xa3d70a4b},			/* 1.15681=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3ff3029b, 0x5180da3b, 0x3fea8f5c, 0x28f5c29d},			/* 1.18813=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3ff389ed, 0x3e13258c, 0x3feae147, 0xae147aef},			/* 1.22117=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3ff41933, 0xb0e44651, 0x3feb3333, 0x33333341},			/* 1.25615=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3ff4b18a, 0x2ece7fce, 0x3feb851e, 0xb851eb93},			/* 1.29334=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3ff5544b, 0x4e482a91, 0x3febd70a, 0x3d70a3e5},			/* 1.33308=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3ff60324, 0xf23a6f50, 0x3fec28f5, 0xc28f5c37},			/* 1.37576=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3ff6c035, 0x579d7a92, 0x3fec7ae1, 0x47ae1489},			/* 1.42192=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3ff78e36, 0x0604b352, 0x3feccccc, 0xccccccdb},			/* 1.47221=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3ff870bd, 0x73abde93, 0x3fed1eb8, 0x51eb852d},			/* 1.52752=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3ff96ca7, 0x7c922d27, 0x3fed70a3, 0xd70a3d7f},			/* 1.58902=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3ffa88c3, 0xf9396fce, 0x3fedc28f, 0x5c28f5d1},			/* 1.65839=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3ffbcf0c, 0xd47416a9, 0x3fee147a, 0xe147ae23},			/* 1.73804=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3ffd4ef9, 0x68880e21, 0x3fee6666, 0x66666675},			/* 1.83178=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fff2272, 0xae325ab5, 0x3feeb851, 0xeb851ec7},			/* 1.94591=f(0.96000)*/
-{64, 0,123,__LINE__, 0x4000bd05, 0x89d8e33d, 0x3fef0a3d, 0x70a3d719},			/* 2.09229=f(0.97000)*/
-{64, 0,123,__LINE__, 0x40026167, 0x19161d89, 0x3fef5c28, 0xf5c28f6b},			/* 2.29756=f(0.98000)*/
-{64, 0,123,__LINE__, 0x40052c58, 0x1997ce42, 0x3fefae14, 0x7ae147bd},			/* 2.64665=f(0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff00000, 0x00000007},			/* 64.0000=f(1.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe62e42, 0xfefa3980, 0x3fe33333, 0x333332ec},			/* 0.69314=f(0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_atanh(m)   {run_vector_1(m,atanh_vec,(char *)(atanh),"atanh","dd");   }	
diff --git a/newlib/libm/test/atanhf_vec.c b/newlib/libm/test/atanhf_vec.c
deleted file mode 100644
index 16a114419..000000000
--- a/newlib/libm/test/atanhf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type atanhf_vec[] = {
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 0,15, 39,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 1, 0,123,__LINE__, 0xc0052c58, 0x60000000, 0xbfefae14, 0x7ae147ac},			/* -2.64665=f(-0.99000)*/
-{ 1, 0,123,__LINE__, 0xc0026167, 0x60000000, 0xbfef5c28, 0xf5c28f5a},			/* -2.29756=f(-0.98000)*/
-{ 1, 0,123,__LINE__, 0xc000bd05, 0xc0000000, 0xbfef0a3d, 0x70a3d708},			/* -2.09229=f(-0.97000)*/
-{11, 0,123,__LINE__, 0xbfff2272, 0x60000000, 0xbfeeb851, 0xeb851eb6},			/* -1.94591=f(-0.96000)*/
-{11, 0,123,__LINE__, 0xbffd4ef9, 0x40000000, 0xbfee6666, 0x66666664},			/* -1.83178=f(-0.95000)*/
-{11, 0,123,__LINE__, 0xbffbcf0c, 0xc0000000, 0xbfee147a, 0xe147ae12},			/* -1.73804=f(-0.94000)*/
-{11, 0,123,__LINE__, 0xbffa88c4, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* -1.65839=f(-0.93000)*/
-{11, 0,123,__LINE__, 0xbff96ca7, 0xa0000000, 0xbfed70a3, 0xd70a3d6e},			/* -1.58902=f(-0.92000)*/
-{11, 0,123,__LINE__, 0xbff870bd, 0xa0000000, 0xbfed1eb8, 0x51eb851c},			/* -1.52752=f(-0.91000)*/
-{11, 0,123,__LINE__, 0xbff78e35, 0xe0000000, 0xbfeccccc, 0xccccccca},			/* -1.47221=f(-0.90000)*/
-{11, 0,123,__LINE__, 0xbff6c035, 0x40000000, 0xbfec7ae1, 0x47ae1478},			/* -1.42192=f(-0.89000)*/
-{11, 0,123,__LINE__, 0xbff60324, 0xe0000000, 0xbfec28f5, 0xc28f5c26},			/* -1.37576=f(-0.88000)*/
-{11, 0,123,__LINE__, 0xbff5544b, 0x60000000, 0xbfebd70a, 0x3d70a3d4},			/* -1.33308=f(-0.87000)*/
-{11, 0,123,__LINE__, 0xbff4b18a, 0x40000000, 0xbfeb851e, 0xb851eb82},			/* -1.29334=f(-0.86000)*/
-{11, 0,123,__LINE__, 0xbff41933, 0xc0000000, 0xbfeb3333, 0x33333330},			/* -1.25615=f(-0.85000)*/
-{11, 0,123,__LINE__, 0xbff389ed, 0x20000000, 0xbfeae147, 0xae147ade},			/* -1.22117=f(-0.84000)*/
-{11, 0,123,__LINE__, 0xbff3029b, 0x40000000, 0xbfea8f5c, 0x28f5c28c},			/* -1.18813=f(-0.83000)*/
-{11, 0,123,__LINE__, 0xbff28253, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* -1.15681=f(-0.82000)*/
-{11, 0,123,__LINE__, 0xbff2084f, 0xa0000000, 0xbfe9eb85, 0x1eb851e8},			/* -1.12702=f(-0.81000)*/
-{11, 0,123,__LINE__, 0xbff193ea, 0x80000000, 0xbfe99999, 0x99999996},			/* -1.09861=f(-0.80000)*/
-{11, 0,123,__LINE__, 0xbff12495, 0xa0000000, 0xbfe947ae, 0x147ae144},			/* -1.07143=f(-0.79000)*/
-{11, 0,123,__LINE__, 0xbff0b9d6, 0x60000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -1.04537=f(-0.78000)*/
-{11, 0,123,__LINE__, 0xbff05343, 0x20000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -1.02032=f(-0.77000)*/
-{13, 0,123,__LINE__, 0xbfefe0fe, 0x60000000, 0xbfe851eb, 0x851eb84e},			/* -0.99621=f(-0.76000)*/
-{13, 0,123,__LINE__, 0xbfef2272, 0xa0000000, 0xbfe7ffff, 0xfffffffc},			/* -0.97295=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbfee6a53, 0xc0000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.95047=f(-0.74000)*/
-{12, 0,123,__LINE__, 0xbfedb822, 0x80000000, 0xbfe75c28, 0xf5c28f58},			/* -0.92872=f(-0.73000)*/
-{12, 0,123,__LINE__, 0xbfed0b6d, 0xa0000000, 0xbfe70a3d, 0x70a3d706},			/* -0.90764=f(-0.72000)*/
-{12, 0,123,__LINE__, 0xbfec63cf, 0x40000000, 0xbfe6b851, 0xeb851eb4},			/* -0.88718=f(-0.71000)*/
-{12, 0,123,__LINE__, 0xbfebc0ed, 0x00000000, 0xbfe66666, 0x66666662},			/* -0.86730=f(-0.70000)*/
-{12, 0,123,__LINE__, 0xbfeb2274, 0x20000000, 0xbfe6147a, 0xe147ae10},			/* -0.84795=f(-0.69000)*/
-{12, 0,123,__LINE__, 0xbfea881a, 0x20000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.82911=f(-0.68000)*/
-{12, 0,123,__LINE__, 0xbfe9f19b, 0xa0000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.81074=f(-0.67000)*/
-{12, 0,123,__LINE__, 0xbfe95eba, 0xc0000000, 0xbfe51eb8, 0x51eb851a},			/* -0.79281=f(-0.66000)*/
-{12, 0,123,__LINE__, 0xbfe8cf3f, 0x20000000, 0xbfe4cccc, 0xccccccc8},			/* -0.77529=f(-0.65000)*/
-{12, 0,123,__LINE__, 0xbfe842f5, 0x80000000, 0xbfe47ae1, 0x47ae1476},			/* -0.75817=f(-0.64000)*/
-{14, 0,123,__LINE__, 0xbfe7b9ae, 0x60000000, 0xbfe428f5, 0xc28f5c24},			/* -0.74141=f(-0.63000)*/
-{13, 0,123,__LINE__, 0xbfe7333d, 0xe0000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.72500=f(-0.62000)*/
-{13, 0,123,__LINE__, 0xbfe6af7b, 0xe0000000, 0xbfe3851e, 0xb851eb80},			/* -0.70892=f(-0.61000)*/
-{13, 0,123,__LINE__, 0xbfe62e43, 0x00000000, 0xbfe33333, 0x3333332e},			/* -0.69314=f(-0.60000)*/
-{13, 0,123,__LINE__, 0xbfe5af70, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* -0.67766=f(-0.59000)*/
-{13, 0,123,__LINE__, 0xbfe532e4, 0xe0000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.66246=f(-0.58000)*/
-{13, 0,123,__LINE__, 0xbfe4b881, 0xc0000000, 0xbfe23d70, 0xa3d70a38},			/* -0.64752=f(-0.57000)*/
-{13, 0,123,__LINE__, 0xbfe4402b, 0x60000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.63283=f(-0.56000)*/
-{14, 0,123,__LINE__, 0xbfe3c9c7, 0xa0000000, 0xbfe19999, 0x99999994},			/* -0.61838=f(-0.55000)*/
-{14, 0,123,__LINE__, 0xbfe3553e, 0x20000000, 0xbfe147ae, 0x147ae142},			/* -0.60415=f(-0.54000)*/
-{14, 0,123,__LINE__, 0xbfe2e278, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.59014=f(-0.53000)*/
-{14, 0,123,__LINE__, 0xbfe27160, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.57633=f(-0.52000)*/
-{14, 0,123,__LINE__, 0xbfe201e1, 0xe0000000, 0xbfe051eb, 0x851eb84c},			/* -0.56272=f(-0.51000)*/
-{15, 0,123,__LINE__, 0xbfe193ea, 0x80000000, 0xbfdfffff, 0xfffffff4},			/* -0.54930=f(-0.50000)*/
-{10, 0,123,__LINE__, 0xbfe12768, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.53606=f(-0.49000)*/
-{10, 0,123,__LINE__, 0xbfe0bc49, 0x80000000, 0xbfdeb851, 0xeb851eac},			/* -0.52298=f(-0.48000)*/
-{10, 0,123,__LINE__, 0xbfe0527f, 0x00000000, 0xbfde147a, 0xe147ae08},			/* -0.51007=f(-0.47000)*/
-{14, 0,123,__LINE__, 0xbfdfd3f2, 0xc0000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.49731=f(-0.46000)*/
-{14, 0,123,__LINE__, 0xbfdf0554, 0x20000000, 0xbfdccccc, 0xccccccc0},			/* -0.48470=f(-0.45000)*/
-{14, 0,123,__LINE__, 0xbfde3907, 0x80000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.47223=f(-0.44000)*/
-{13, 0,123,__LINE__, 0xbfdd6ef2, 0x80000000, 0xbfdb851e, 0xb851eb78},			/* -0.45989=f(-0.43000)*/
-{13, 0,123,__LINE__, 0xbfdca6fc, 0x60000000, 0xbfdae147, 0xae147ad4},			/* -0.44769=f(-0.42000)*/
-{15, 0,123,__LINE__, 0xbfdbe10d, 0xe0000000, 0xbfda3d70, 0xa3d70a30},			/* -0.43561=f(-0.41000)*/
-{14, 0,123,__LINE__, 0xbfdb1d10, 0x60000000, 0xbfd99999, 0x9999998c},			/* -0.42364=f(-0.40000)*/
-{14, 0,123,__LINE__, 0xbfda5aee, 0x60000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41180=f(-0.39000)*/
-{15, 0,123,__LINE__, 0xbfd99a93, 0xc0000000, 0xbfd851eb, 0x851eb844},			/* -0.40005=f(-0.38000)*/
-{12, 0,123,__LINE__, 0xbfd8dbec, 0xa0000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.38842=f(-0.37000)*/
-{12, 0,123,__LINE__, 0xbfd81ee6, 0x20000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.37688=f(-0.36000)*/
-{15, 0,123,__LINE__, 0xbfd7636e, 0x20000000, 0xbfd66666, 0x66666658},			/* -0.36544=f(-0.35000)*/
-{14, 0,123,__LINE__, 0xbfd6a973, 0xa0000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.35409=f(-0.34000)*/
-{16, 0,123,__LINE__, 0xbfd5f0e6, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* -0.34282=f(-0.33000)*/
-{15, 0,123,__LINE__, 0xbfd539b4, 0xc0000000, 0xbfd47ae1, 0x47ae146c},			/* -0.33164=f(-0.32000)*/
-{13, 0,123,__LINE__, 0xbfd483d0, 0xe0000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.32054=f(-0.31000)*/
-{16, 0,123,__LINE__, 0xbfd3cf2b, 0x60000000, 0xbfd33333, 0x33333324},			/* -0.30951=f(-0.30000)*/
-{15, 0,123,__LINE__, 0xbfd31bb5, 0xa0000000, 0xbfd28f5c, 0x28f5c280},			/* -0.29856=f(-0.29000)*/
-{14, 0,123,__LINE__, 0xbfd26962, 0x20000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.28768=f(-0.28000)*/
-{16, 0,123,__LINE__, 0xbfd1b823, 0x20000000, 0xbfd147ae, 0x147ae138},			/* -0.27686=f(-0.27000)*/
-{15, 0,123,__LINE__, 0xbfd107eb, 0x80000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26610=f(-0.26000)*/
-{17, 0,123,__LINE__, 0xbfd058af, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* -0.25541=f(-0.25000)*/
-{15, 0,123,__LINE__, 0xbfcf54c2, 0x00000000, 0xbfceb851, 0xeb851e98},			/* -0.24477=f(-0.24000)*/
-{16, 0,123,__LINE__, 0xbfcdf9eb, 0xc0000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.23418=f(-0.23000)*/
-{16, 0,123,__LINE__, 0xbfcca0c3, 0x60000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.22365=f(-0.22000)*/
-{15, 0,123,__LINE__, 0xbfcb4932, 0xc0000000, 0xbfcae147, 0xae147ac0},			/* -0.21317=f(-0.21000)*/
-{17, 0,123,__LINE__, 0xbfc9f323, 0xe0000000, 0xbfc99999, 0x99999978},			/* -0.20273=f(-0.20000)*/
-{16, 0,123,__LINE__, 0xbfc89e81, 0x20000000, 0xbfc851eb, 0x851eb830},			/* -0.19233=f(-0.19000)*/
-{17, 0,123,__LINE__, 0xbfc74b35, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18198=f(-0.18000)*/
-{18, 0,123,__LINE__, 0xbfc5f92c, 0x60000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17166=f(-0.17000)*/
-{16, 0,123,__LINE__, 0xbfc4a851, 0xa0000000, 0xbfc47ae1, 0x47ae1458},			/* -0.16138=f(-0.16000)*/
-{17, 0,123,__LINE__, 0xbfc35891, 0xe0000000, 0xbfc33333, 0x33333310},			/* -0.15114=f(-0.15000)*/
-{14, 0,123,__LINE__, 0xbfc209d9, 0x80000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.14092=f(-0.14000)*/
-{19, 0,123,__LINE__, 0xbfc0bc15, 0x60000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13073=f(-0.13000)*/
-{17, 0,123,__LINE__, 0xbfbede65, 0xe0000000, 0xbfbeb851, 0xeb851e71},			/* -0.12058=f(-0.12000)*/
-{17, 0,123,__LINE__, 0xbfbc463f, 0xc0000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.11044=f(-0.11000)*/
-{18, 0,123,__LINE__, 0xbfb9af93, 0xe0000000, 0xbfb99999, 0x99999953},			/* -0.10033=f(-0.00100)*/
-{19, 0,123,__LINE__, 0xbfb71a3e, 0x40000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09024=f(-0.09000)*/
-{16, 0,123,__LINE__, 0xbfb4861b, 0x80000000, 0xbfb47ae1, 0x47ae1435},			/* -0.08017=f(-0.08000)*/
-{19, 0,123,__LINE__, 0xbfb1f309, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.07011=f(-0.07000)*/
-{17, 0,123,__LINE__, 0xbfaec1c7, 0x20000000, 0xbfaeb851, 0xeb851e2d},			/* -0.06007=f(-0.06000)*/
-{21, 0,123,__LINE__, 0xbfa99f11, 0xc0000000, 0xbfa99999, 0x9999990e},			/* -0.05004=f(-0.05000)*/
-{21, 0,123,__LINE__, 0xbfa47dad, 0xc0000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.04002=f(-0.04000)*/
-{22, 0,123,__LINE__, 0xbf9ebaae, 0x40000000, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{23, 0,123,__LINE__, 0xbf947b94, 0x40000000, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{23, 0,123,__LINE__, 0xbf847b0e, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{23, 0,123,__LINE__, 0x3f847b0e, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{23, 0,123,__LINE__, 0x3f947b94, 0x40000000, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{22, 0,123,__LINE__, 0x3f9ebaae, 0x40000000, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{21, 0,123,__LINE__, 0x3fa47dad, 0xc0000000, 0x3fa47ae1, 0x47ae1508},			/* 0.04002=f(0.04000)*/
-{21, 0,123,__LINE__, 0x3fa99f11, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 0.05004=f(0.05000)*/
-{17, 0,123,__LINE__, 0x3faec1c7, 0x20000000, 0x3faeb851, 0xeb851f46},			/* 0.06007=f(0.06000)*/
-{19, 0,123,__LINE__, 0x3fb1f309, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 0.07011=f(0.07000)*/
-{16, 0,123,__LINE__, 0x3fb4861b, 0x80000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.08017=f(0.08000)*/
-{19, 0,123,__LINE__, 0x3fb71a3e, 0x40000000, 0x3fb70a3d, 0x70a3d750},			/* 0.09024=f(0.09000)*/
-{18, 0,123,__LINE__, 0x3fb9af93, 0xe0000000, 0x3fb99999, 0x999999df},			/* 0.10033=f(0.10000)*/
-{17, 0,123,__LINE__, 0x3fbc463f, 0xc0000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11044=f(0.11000)*/
-{17, 0,123,__LINE__, 0x3fbede65, 0xe0000000, 0x3fbeb851, 0xeb851efd},			/* 0.12058=f(0.12000)*/
-{19, 0,123,__LINE__, 0x3fc0bc15, 0x60000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13073=f(0.13000)*/
-{14, 0,123,__LINE__, 0x3fc209d9, 0x80000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.14092=f(0.14000)*/
-{17, 0,123,__LINE__, 0x3fc35891, 0xe0000000, 0x3fc33333, 0x33333356},			/* 0.15114=f(0.15000)*/
-{16, 0,123,__LINE__, 0x3fc4a851, 0xa0000000, 0x3fc47ae1, 0x47ae149e},			/* 0.16138=f(0.16000)*/
-{18, 0,123,__LINE__, 0x3fc5f92c, 0x60000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17166=f(0.17000)*/
-{17, 0,123,__LINE__, 0x3fc74b35, 0x80000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.18198=f(0.18000)*/
-{16, 0,123,__LINE__, 0x3fc89e81, 0x20000000, 0x3fc851eb, 0x851eb876},			/* 0.19233=f(0.19000)*/
-{17, 0,123,__LINE__, 0x3fc9f323, 0xe0000000, 0x3fc99999, 0x999999be},			/* 0.20273=f(0.20000)*/
-{15, 0,123,__LINE__, 0x3fcb4932, 0xc0000000, 0x3fcae147, 0xae147b06},			/* 0.21317=f(0.21000)*/
-{16, 0,123,__LINE__, 0x3fcca0c3, 0x60000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22365=f(0.22000)*/
-{16, 0,123,__LINE__, 0x3fcdf9eb, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.23418=f(0.23000)*/
-{15, 0,123,__LINE__, 0x3fcf54c2, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 0.24477=f(0.24000)*/
-{17, 0,123,__LINE__, 0x3fd058af, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.25541=f(0.25000)*/
-{15, 0,123,__LINE__, 0x3fd107eb, 0x80000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26610=f(0.26000)*/
-{16, 0,123,__LINE__, 0x3fd1b823, 0x20000000, 0x3fd147ae, 0x147ae15b},			/* 0.27686=f(0.27000)*/
-{14, 0,123,__LINE__, 0x3fd26962, 0x20000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.28768=f(0.28000)*/
-{15, 0,123,__LINE__, 0x3fd31bb5, 0xa0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29856=f(0.29000)*/
-{16, 0,123,__LINE__, 0x3fd3cf2b, 0x60000000, 0x3fd33333, 0x33333347},			/* 0.30951=f(0.30000)*/
-{13, 0,123,__LINE__, 0x3fd483d0, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.32054=f(0.31000)*/
-{15, 0,123,__LINE__, 0x3fd539b4, 0xc0000000, 0x3fd47ae1, 0x47ae148f},			/* 0.33164=f(0.32000)*/
-{16, 0,123,__LINE__, 0x3fd5f0e6, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.34282=f(0.33000)*/
-{14, 0,123,__LINE__, 0x3fd6a973, 0xa0000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.35409=f(0.34000)*/
-{15, 0,123,__LINE__, 0x3fd7636e, 0x20000000, 0x3fd66666, 0x6666667b},			/* 0.36544=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3fd81ee6, 0x20000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.37688=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3fd8dbec, 0xa0000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.38842=f(0.37000)*/
-{15, 0,123,__LINE__, 0x3fd99a93, 0xc0000000, 0x3fd851eb, 0x851eb867},			/* 0.40005=f(0.38000)*/
-{14, 0,123,__LINE__, 0x3fda5aee, 0x60000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41180=f(0.39000)*/
-{14, 0,123,__LINE__, 0x3fdb1d10, 0x60000000, 0x3fd99999, 0x999999af},			/* 0.42364=f(0.40000)*/
-{15, 0,123,__LINE__, 0x3fdbe10d, 0xe0000000, 0x3fda3d70, 0xa3d70a53},			/* 0.43561=f(0.41000)*/
-{13, 0,123,__LINE__, 0x3fdca6fc, 0x60000000, 0x3fdae147, 0xae147af7},			/* 0.44769=f(0.42000)*/
-{13, 0,123,__LINE__, 0x3fdd6ef2, 0x80000000, 0x3fdb851e, 0xb851eb9b},			/* 0.45989=f(0.43000)*/
-{14, 0,123,__LINE__, 0x3fde3907, 0x80000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.47223=f(0.44000)*/
-{14, 0,123,__LINE__, 0x3fdf0554, 0x20000000, 0x3fdccccc, 0xcccccce3},			/* 0.48470=f(0.45000)*/
-{14, 0,123,__LINE__, 0x3fdfd3f2, 0xc0000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.49731=f(0.46000)*/
-{10, 0,123,__LINE__, 0x3fe0527f, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 0.51007=f(0.47000)*/
-{10, 0,123,__LINE__, 0x3fe0bc49, 0x80000000, 0x3fdeb851, 0xeb851ecf},			/* 0.52298=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fe12768, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.53606=f(0.49000)*/
-{15, 0,123,__LINE__, 0x3fe193ea, 0x80000000, 0x3fe00000, 0x0000000b},			/* 0.54930=f(0.50000)*/
-{14, 0,123,__LINE__, 0x3fe201e1, 0xe0000000, 0x3fe051eb, 0x851eb85d},			/* 0.56272=f(0.51000)*/
-{14, 0,123,__LINE__, 0x3fe27160, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.57633=f(0.52000)*/
-{14, 0,123,__LINE__, 0x3fe2e278, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.59014=f(0.53000)*/
-{14, 0,123,__LINE__, 0x3fe3553e, 0x20000000, 0x3fe147ae, 0x147ae153},			/* 0.60415=f(0.54000)*/
-{14, 0,123,__LINE__, 0x3fe3c9c7, 0xa0000000, 0x3fe19999, 0x999999a5},			/* 0.61838=f(0.55000)*/
-{13, 0,123,__LINE__, 0x3fe4402b, 0x60000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.63283=f(0.56000)*/
-{13, 0,123,__LINE__, 0x3fe4b881, 0xc0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.64752=f(0.57000)*/
-{13, 0,123,__LINE__, 0x3fe532e4, 0xe0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.66246=f(0.58000)*/
-{13, 0,123,__LINE__, 0x3fe5af70, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 0.67766=f(0.59000)*/
-{13, 0,123,__LINE__, 0x3fe62e43, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.69314=f(0.60000)*/
-{13, 0,123,__LINE__, 0x3fe6af7b, 0xe0000000, 0x3fe3851e, 0xb851eb91},			/* 0.70892=f(0.61000)*/
-{13, 0,123,__LINE__, 0x3fe7333d, 0xe0000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.72500=f(0.62000)*/
-{14, 0,123,__LINE__, 0x3fe7b9ae, 0x60000000, 0x3fe428f5, 0xc28f5c35},			/* 0.74141=f(0.63000)*/
-{12, 0,123,__LINE__, 0x3fe842f5, 0x80000000, 0x3fe47ae1, 0x47ae1487},			/* 0.75817=f(0.64000)*/
-{12, 0,123,__LINE__, 0x3fe8cf3f, 0x20000000, 0x3fe4cccc, 0xccccccd9},			/* 0.77529=f(0.65000)*/
-{12, 0,123,__LINE__, 0x3fe95eba, 0xc0000000, 0x3fe51eb8, 0x51eb852b},			/* 0.79281=f(0.66000)*/
-{12, 0,123,__LINE__, 0x3fe9f19b, 0xa0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.81074=f(0.67000)*/
-{12, 0,123,__LINE__, 0x3fea881a, 0x20000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82911=f(0.68000)*/
-{12, 0,123,__LINE__, 0x3feb2274, 0x20000000, 0x3fe6147a, 0xe147ae21},			/* 0.84795=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3febc0ed, 0x00000000, 0x3fe66666, 0x66666673},			/* 0.86730=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3fec63cf, 0x40000000, 0x3fe6b851, 0xeb851ec5},			/* 0.88718=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3fed0b6d, 0xa0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.90764=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3fedb822, 0x80000000, 0x3fe75c28, 0xf5c28f69},			/* 0.92872=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3fee6a53, 0xc0000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.95047=f(0.74000)*/
-{13, 0,123,__LINE__, 0x3fef2272, 0xa0000000, 0x3fe80000, 0x0000000d},			/* 0.97295=f(0.75000)*/
-{13, 0,123,__LINE__, 0x3fefe0fe, 0x60000000, 0x3fe851eb, 0x851eb85f},			/* 0.99621=f(0.76000)*/
-{11, 0,123,__LINE__, 0x3ff05343, 0x20000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.02032=f(0.77000)*/
-{11, 0,123,__LINE__, 0x3ff0b9d6, 0x60000000, 0x3fe8f5c2, 0x8f5c2903},			/* 1.04537=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3ff12495, 0xa0000000, 0x3fe947ae, 0x147ae155},			/* 1.07143=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3ff193ea, 0x80000000, 0x3fe99999, 0x999999a7},			/* 1.09861=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3ff2084f, 0xa0000000, 0x3fe9eb85, 0x1eb851f9},			/* 1.12702=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3ff28253, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 1.15681=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3ff3029b, 0x40000000, 0x3fea8f5c, 0x28f5c29d},			/* 1.18813=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3ff389ed, 0x20000000, 0x3feae147, 0xae147aef},			/* 1.22117=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3ff41933, 0xc0000000, 0x3feb3333, 0x33333341},			/* 1.25615=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3ff4b18a, 0x40000000, 0x3feb851e, 0xb851eb93},			/* 1.29334=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3ff5544b, 0x60000000, 0x3febd70a, 0x3d70a3e5},			/* 1.33308=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3ff60324, 0xe0000000, 0x3fec28f5, 0xc28f5c37},			/* 1.37576=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3ff6c035, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 1.42192=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3ff78e35, 0xe0000000, 0x3feccccc, 0xccccccdb},			/* 1.47221=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3ff870bd, 0xa0000000, 0x3fed1eb8, 0x51eb852d},			/* 1.52752=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3ff96ca7, 0xa0000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.58902=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3ffa88c4, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.65839=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3ffbcf0c, 0xc0000000, 0x3fee147a, 0xe147ae23},			/* 1.73804=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3ffd4ef9, 0x40000000, 0x3fee6666, 0x66666675},			/* 1.83178=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3fff2272, 0x60000000, 0x3feeb851, 0xeb851ec7},			/* 1.94591=f(0.96000)*/
-{ 1, 0,123,__LINE__, 0x4000bd05, 0xc0000000, 0x3fef0a3d, 0x70a3d719},			/* 2.09229=f(0.97000)*/
-{ 1, 0,123,__LINE__, 0x40026167, 0x60000000, 0x3fef5c28, 0xf5c28f6b},			/* 2.29756=f(0.98000)*/
-{ 1, 0,123,__LINE__, 0x40052c58, 0x60000000, 0x3fefae14, 0x7ae147bd},			/* 2.64665=f(0.99000)*/
-{ 1,15, 39,__LINE__, 0x40500000, 0x00000000, 0x3ff00000, 0x00000007},			/* 64.0000=f(1.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 64.0000=f(1.01000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 64.0000=f(1.02000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 64.0000=f(1.03000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 64.0000=f(1.04000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 64.0000=f(1.05000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 64.0000=f(1.06000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 64.0000=f(1.07000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 64.0000=f(1.08000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 64.0000=f(1.09000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 64.0000=f(1.10000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 64.0000=f(1.11000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 64.0000=f(1.12000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 64.0000=f(1.13000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 64.0000=f(1.14000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 64.0000=f(1.15000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 64.0000=f(1.16000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 64.0000=f(1.17000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 64.0000=f(1.18000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 64.0000=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 1,13, 37,__LINE__, 0x40500000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 64.0000=f(1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400921fb, 0x54442d18},			/* 64.0000=f(3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 64.0000=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{13, 0,123,__LINE__, 0x3fe62e43, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.69314=f(0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40026666, 0x66666654},			/* 64.0000=f(2.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x400fffff, 0xffffffee},			/* 64.0000=f(4.00000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 64.0000=f(5.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x401d9999, 0x99999991},			/* 64.0000=f(7.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40223333, 0x3333332f},			/* 64.0000=f(9.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40259999, 0x99999995},			/* 64.0000=f(10.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 64.0000=f(12.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402c6666, 0x66666661},			/* 64.0000=f(14.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 64.0000=f(15.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40319999, 0x99999997},			/* 64.0000=f(17.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 64.0000=f(19.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 64.0000=f(21.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x4036b333, 0x33333330},			/* 64.0000=f(22.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x40386666, 0x66666663},			/* 64.0000=f(24.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403a1999, 0x99999996},			/* 64.0000=f(26.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 64.0000=f(27.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 64.0000=f(29.5000)*/
-0,};
-test_atanhf(m)   {run_vector_1(m,atanhf_vec,(char *)(atanhf),"atanhf","ff");   }	
diff --git a/newlib/libm/test/ceil_vec.c b/newlib/libm/test/ceil_vec.c
deleted file mode 100644
index 94222997c..000000000
--- a/newlib/libm/test/ceil_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type ceil_vec[] = {
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff33333, 0x33333333},			/* -1.00000=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* -1.00000=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* -1.00000=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -1.00000=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* -1.00000=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff26666, 0x66666666},			/* -1.00000=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* -1.00000=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* -1.00000=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -1.00000=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -1.00000=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff19999, 0x99999999},			/* -1.00000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* -1.00000=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff147ae, 0x147ae147},			/* -1.00000=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* -1.00000=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* -1.00000=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* -1.00000=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* -1.00000=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* -1.00000=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff051eb, 0x851eb851},			/* -1.00000=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -1.00000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 0.00000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 0.00000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 0.00000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 0.00000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 0.00000=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfee6666, 0x66666664},			/* 0.00000=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 0.00000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 0.00000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 0.00000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 0.00000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 0.00000=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 0.00000=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 0.00000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 0.00000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 0.00000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 0.00000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 0.00000=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 0.00000=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 0.00000=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 0.00000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe99999, 0x99999996},			/* 0.00000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 0.00000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.00000=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.00000=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 0.00000=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 0.00000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 0.00000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 0.00000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 0.00000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 0.00000=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe66666, 0x66666662},			/* 0.00000=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 0.00000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 0.00000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 0.00000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 0.00000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 0.00000=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 0.00000=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 0.00000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 0.00000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 0.00000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 0.00000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 0.00000=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 0.00000=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 0.00000=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 0.00000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe19999, 0x99999994},			/* 0.00000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 0.00000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.00000=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 0.00000=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 0.00000=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 0.00000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 0.00000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 0.00000=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 0.00000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 0.00000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 0.00000=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 0.00000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 0.00000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 0.00000=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 0.00000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 0.00000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.00000=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 0.00000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 0.00000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 0.00000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd66666, 0x66666658},			/* 0.00000=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 0.00000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 0.00000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 0.00000=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 0.00000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd33333, 0x33333324},			/* 0.00000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 0.00000=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 0.00000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 0.00000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 0.00000=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 0.00000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 0.00000=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 0.00000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 0.00000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 0.00000=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc99999, 0x99999978},			/* 0.00000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 0.00000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 0.00000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 0.00000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 0.00000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc33333, 0x33333310},			/* 0.00000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 0.00000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 0.00000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 0.00000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 0.00000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb99999, 0x99999953},			/* 0.00000=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 0.00000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 0.00000=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 0.00000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 0.00000=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 0.00000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 0.00000=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 0.00000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 0.00000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 0.00000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 1.00000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 1.00000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 1.00000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 1.00000=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 1.00000=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 1.00000=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 1.00000=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 1.00000=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 1.00000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb99999, 0x999999df},			/* 1.00000=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 1.00000=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 1.00000=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.00000=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.00000=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333356},			/* 1.00000=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 1.00000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.00000=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.00000=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 1.00000=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc99999, 0x999999be},			/* 1.00000=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 1.00000=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.00000=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.00000=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 1.00000=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000013},			/* 1.00000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.00000=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 1.00000=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.00000=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.00000=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333347},			/* 1.00000=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.00000=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 1.00000=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 1.00000=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 1.00000=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 1.00000=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 1.00000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 1.00000=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 1.00000=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 1.00000=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd99999, 0x999999af},			/* 1.00000=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 1.00000=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 1.00000=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 1.00000=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 1.00000=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 1.00000=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 1.00000=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 1.00000=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 1.00000=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 1.00000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 1.00000=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 1.00000=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 1.00000=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 1.00000=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 1.00000=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 1.00000=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 1.00000=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 1.00000=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 1.00000=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 1.00000=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 1.00000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 1.00000=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 1.00000=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 1.00000=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 1.00000=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 1.00000=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 1.00000=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 1.00000=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 1.00000=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 1.00000=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666673},			/* 1.00000=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 1.00000=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 1.00000=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 1.00000=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 1.00000=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 1.00000=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 1.00000=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.00000=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 1.00000=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 1.00000=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 1.00000=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 1.00000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 1.00000=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 1.00000=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feae147, 0xae147aef},			/* 1.00000=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333341},			/* 1.00000=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 1.00000=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 1.00000=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 1.00000=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 1.00000=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 1.00000=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 1.00000=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.00000=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.00000=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 1.00000=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666675},			/* 1.00000=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 1.00000=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 1.00000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 1.00000=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 1.00000=f(0.99000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 2.00000=f(1.00000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 2.00000=f(1.01000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 2.00000=f(1.02000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 2.00000=f(1.03000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 2.00000=f(1.04000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 2.00000=f(1.05000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 2.00000=f(1.06000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 2.00000=f(1.07000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 2.00000=f(1.08000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 2.00000=f(1.09000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 2.00000=f(1.10000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 2.00000=f(1.11000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 2.00000=f(1.12000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 2.00000=f(1.13000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 2.00000=f(1.14000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 2.00000=f(1.15000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 2.00000=f(1.16000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 2.00000=f(1.17000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 2.00000=f(1.18000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 2.00000=f(1.19000)*/
-{64, 0,123,__LINE__, 0xc0180000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -6.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* -4.00000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xc0080000, 0x00000000, 0xc00921fb, 0x54442d18},			/* -3.00000=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff921fb, 0x54442d18},			/* -1.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 2.00000=f(1.57079)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400921fb, 0x54442d18},			/* 4.00000=f(3.14159)*/
-{64, 0,123,__LINE__, 0x40140000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 5.00000=f(4.71238)*/
-{64, 0,123,__LINE__, 0xc03e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* -30.0000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xc03c0000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -28.0000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xc03a0000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -26.0000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0xc0380000, 0x00000000, 0xc038e666, 0x66666667},			/* -24.0000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xc0370000, 0x00000000, 0xc0373333, 0x33333334},			/* -23.0000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xc0350000, 0x00000000, 0xc0358000, 0x00000001},			/* -21.0000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xc0330000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -19.0000=f(-19.8000)*/
-{64, 0,123,__LINE__, 0xc0320000, 0x00000000, 0xc0321999, 0x9999999b},			/* -18.0000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xc0300000, 0x00000000, 0xc0306666, 0x66666668},			/* -16.0000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xc02c0000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -14.0000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xc02a0000, 0x00000000, 0xc02a0000, 0x00000004},			/* -13.0000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xc0260000, 0x00000000, 0xc0269999, 0x9999999e},			/* -11.0000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xc0220000, 0x00000000, 0xc0233333, 0x33333338},			/* -9.00000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -7.00000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xc0180000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -6.00000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0120000, 0x00000009},			/* -4.00000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xc0066666, 0x66666678},			/* -2.00000=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff19999, 0x999999bd},			/* -1.00000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 1.00000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x40080000, 0x00000000, 0x40026666, 0x66666654},			/* 3.00000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400fffff, 0xffffffee},			/* 4.00000=f(4.00000)*/
-{64, 0,123,__LINE__, 0x40180000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 6.00000=f(5.70000)*/
-{64, 0,123,__LINE__, 0x40200000, 0x00000000, 0x401d9999, 0x99999991},			/* 8.00000=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40240000, 0x00000000, 0x40223333, 0x3333332f},			/* 10.0000=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40260000, 0x00000000, 0x40259999, 0x99999995},			/* 11.0000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x402a0000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 13.0000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x402e0000, 0x00000000, 0x402c6666, 0x66666661},			/* 15.0000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x40300000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 16.0000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x40320000, 0x00000000, 0x40319999, 0x99999997},			/* 18.0000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x40340000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 20.0000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40350000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 21.0000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x40370000, 0x00000000, 0x4036b333, 0x33333330},			/* 23.0000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x40390000, 0x00000000, 0x40386666, 0x66666663},			/* 25.0000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x403b0000, 0x00000000, 0x403a1999, 0x99999996},			/* 27.0000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x403c0000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 28.0000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x403e0000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 30.0000=f(29.5000)*/
-0,};
-test_ceil(m)   {run_vector_1(m,ceil_vec,(char *)(ceil),"ceil","dd");   }	
diff --git a/newlib/libm/test/ceilf_vec.c b/newlib/libm/test/ceilf_vec.c
deleted file mode 100644
index 2c86955cd..000000000
--- a/newlib/libm/test/ceilf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type ceilf_vec[] = {
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff33333, 0x33333333},			/* -1.00000=f(-1.20000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* -1.00000=f(-1.19000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* -1.00000=f(-1.18000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -1.00000=f(-1.17000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* -1.00000=f(-1.16000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff26666, 0x66666666},			/* -1.00000=f(-1.15000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* -1.00000=f(-1.14000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* -1.00000=f(-1.13000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -1.00000=f(-1.12000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -1.00000=f(-1.11000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff19999, 0x99999999},			/* -1.00000=f(-1.10000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* -1.00000=f(-1.09000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff147ae, 0x147ae147},			/* -1.00000=f(-1.08000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* -1.00000=f(-1.07000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* -1.00000=f(-1.06000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* -1.00000=f(-1.05000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* -1.00000=f(-1.04000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* -1.00000=f(-1.03000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff051eb, 0x851eb851},			/* -1.00000=f(-1.02000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -1.00000=f(-1.01000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* -1.00000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 0.00000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 0.00000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 0.00000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 0.00000=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfee6666, 0x66666664},			/* 0.00000=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 0.00000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 0.00000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 0.00000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 0.00000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 0.00000=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 0.00000=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 0.00000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 0.00000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 0.00000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 0.00000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 0.00000=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 0.00000=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 0.00000=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 0.00000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe99999, 0x99999996},			/* 0.00000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 0.00000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.00000=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.00000=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 0.00000=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 0.00000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 0.00000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 0.00000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 0.00000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 0.00000=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe66666, 0x66666662},			/* 0.00000=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 0.00000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 0.00000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 0.00000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 0.00000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 0.00000=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 0.00000=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 0.00000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 0.00000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 0.00000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 0.00000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 0.00000=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 0.00000=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 0.00000=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 0.00000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe19999, 0x99999994},			/* 0.00000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 0.00000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.00000=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 0.00000=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 0.00000=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 0.00000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 0.00000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 0.00000=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 0.00000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 0.00000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 0.00000=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 0.00000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 0.00000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 0.00000=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 0.00000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 0.00000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.00000=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 0.00000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 0.00000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 0.00000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd66666, 0x66666658},			/* 0.00000=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 0.00000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 0.00000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 0.00000=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 0.00000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd33333, 0x33333324},			/* 0.00000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 0.00000=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 0.00000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 0.00000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 0.00000=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 0.00000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 0.00000=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 0.00000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 0.00000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 0.00000=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc99999, 0x99999978},			/* 0.00000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 0.00000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 0.00000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 0.00000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 0.00000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc33333, 0x33333310},			/* 0.00000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 0.00000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 0.00000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 0.00000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 0.00000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb99999, 0x99999953},			/* 0.00000=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 0.00000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 0.00000=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 0.00000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 0.00000=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 0.00000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 0.00000=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 0.00000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 0.00000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 0.00000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 1.00000=f(0.01000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 1.00000=f(0.02000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 1.00000=f(0.03000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 1.00000=f(0.04000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 1.00000=f(0.05000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 1.00000=f(0.06000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 1.00000=f(0.07000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 1.00000=f(0.08000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 1.00000=f(0.09000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fb99999, 0x999999df},			/* 1.00000=f(0.10000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 1.00000=f(0.11000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 1.00000=f(0.12000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.00000=f(0.13000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.00000=f(0.14000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333356},			/* 1.00000=f(0.15000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 1.00000=f(0.16000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.00000=f(0.17000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.00000=f(0.18000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 1.00000=f(0.19000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fc99999, 0x999999be},			/* 1.00000=f(0.20000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 1.00000=f(0.21000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.00000=f(0.22000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.00000=f(0.23000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 1.00000=f(0.24000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000013},			/* 1.00000=f(0.25000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.00000=f(0.26000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 1.00000=f(0.27000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.00000=f(0.28000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.00000=f(0.29000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333347},			/* 1.00000=f(0.30000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.00000=f(0.31000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 1.00000=f(0.32000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 1.00000=f(0.33000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 1.00000=f(0.34000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 1.00000=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 1.00000=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 1.00000=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 1.00000=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 1.00000=f(0.39000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fd99999, 0x999999af},			/* 1.00000=f(0.40000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 1.00000=f(0.41000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 1.00000=f(0.42000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 1.00000=f(0.43000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 1.00000=f(0.44000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 1.00000=f(0.45000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 1.00000=f(0.46000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 1.00000=f(0.47000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 1.00000=f(0.48000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 1.00000=f(0.49000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 1.00000=f(0.50000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 1.00000=f(0.51000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 1.00000=f(0.52000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 1.00000=f(0.53000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 1.00000=f(0.54000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 1.00000=f(0.55000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 1.00000=f(0.56000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 1.00000=f(0.57000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 1.00000=f(0.58000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 1.00000=f(0.59000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 1.00000=f(0.60000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 1.00000=f(0.61000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 1.00000=f(0.62000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 1.00000=f(0.63000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 1.00000=f(0.64000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 1.00000=f(0.65000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 1.00000=f(0.66000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 1.00000=f(0.67000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 1.00000=f(0.68000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 1.00000=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666673},			/* 1.00000=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 1.00000=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 1.00000=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 1.00000=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 1.00000=f(0.74000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 1.00000=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 1.00000=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.00000=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 1.00000=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 1.00000=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 1.00000=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 1.00000=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 1.00000=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 1.00000=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feae147, 0xae147aef},			/* 1.00000=f(0.84000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333341},			/* 1.00000=f(0.85000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 1.00000=f(0.86000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 1.00000=f(0.87000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 1.00000=f(0.88000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 1.00000=f(0.89000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 1.00000=f(0.90000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 1.00000=f(0.91000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.00000=f(0.92000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.00000=f(0.93000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 1.00000=f(0.94000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666675},			/* 1.00000=f(0.95000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 1.00000=f(0.96000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 1.00000=f(0.97000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 1.00000=f(0.98000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 1.00000=f(0.99000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 2.00000=f(1.01000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 2.00000=f(1.02000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 2.00000=f(1.03000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 2.00000=f(1.04000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 2.00000=f(1.05000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 2.00000=f(1.06000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 2.00000=f(1.07000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 2.00000=f(1.08000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 2.00000=f(1.09000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 2.00000=f(1.10000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 2.00000=f(1.11000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 2.00000=f(1.12000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 2.00000=f(1.13000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 2.00000=f(1.14000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 2.00000=f(1.15000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 2.00000=f(1.16000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 2.00000=f(1.17000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 2.00000=f(1.18000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 2.00000=f(1.19000)*/
-{15, 0,123,__LINE__, 0xc0180000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -6.00000=f(-6.28318)*/
-{14, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* -4.00000=f(-4.71238)*/
-{15, 0,123,__LINE__, 0xc0080000, 0x00000000, 0xc00921fb, 0x54442d18},			/* -3.00000=f(-3.14159)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff921fb, 0x54442d18},			/* -1.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 1, 0,123,__LINE__, 0x40000000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 2.00000=f(1.57079)*/
-{11, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400921fb, 0x54442d18},			/* 4.00000=f(3.14159)*/
-{13, 0,123,__LINE__, 0x40140000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 5.00000=f(4.71238)*/
-{64, 0,123,__LINE__, 0xc03e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* -30.0000=f(-30.0000)*/
-{17, 0,123,__LINE__, 0xc03c0000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -28.0000=f(-28.3000)*/
-{16, 0,123,__LINE__, 0xc03a0000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -26.0000=f(-26.6000)*/
-{16, 0,123,__LINE__, 0xc0380000, 0x00000000, 0xc038e666, 0x66666667},			/* -24.0000=f(-24.9000)*/
-{18, 0,123,__LINE__, 0xc0370000, 0x00000000, 0xc0373333, 0x33333334},			/* -23.0000=f(-23.2000)*/
-{16, 0,123,__LINE__, 0xc0350000, 0x00000000, 0xc0358000, 0x00000001},			/* -21.0000=f(-21.5000)*/
-{16, 0,123,__LINE__, 0xc0330000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -19.0000=f(-19.8000)*/
-{19, 0,123,__LINE__, 0xc0320000, 0x00000000, 0xc0321999, 0x9999999b},			/* -18.0000=f(-18.1000)*/
-{17, 0,123,__LINE__, 0xc0300000, 0x00000000, 0xc0306666, 0x66666668},			/* -16.0000=f(-16.4000)*/
-{15, 0,123,__LINE__, 0xc02c0000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -14.0000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xc02a0000, 0x00000000, 0xc02a0000, 0x00000004},			/* -13.0000=f(-13.0000)*/
-{16, 0,123,__LINE__, 0xc0260000, 0x00000000, 0xc0269999, 0x9999999e},			/* -11.0000=f(-11.3000)*/
-{15, 0,123,__LINE__, 0xc0220000, 0x00000000, 0xc0233333, 0x33333338},			/* -9.00000=f(-9.60000)*/
-{14, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -7.00000=f(-7.90000)*/
-{16, 0,123,__LINE__, 0xc0180000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -6.00000=f(-6.20000)*/
-{14, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0120000, 0x00000009},			/* -4.00000=f(-4.50000)*/
-{13, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xc0066666, 0x66666678},			/* -2.00000=f(-2.80000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbff19999, 0x999999bd},			/* -1.00000=f(-1.10000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 1.00000=f(0.60000)*/
-{12, 0,123,__LINE__, 0x40080000, 0x00000000, 0x40026666, 0x66666654},			/* 3.00000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400fffff, 0xffffffee},			/* 4.00000=f(4.00000)*/
-{12, 0,123,__LINE__, 0x40180000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 6.00000=f(5.70000)*/
-{10, 0,123,__LINE__, 0x40200000, 0x00000000, 0x401d9999, 0x99999991},			/* 8.00000=f(7.40000)*/
-{13, 0,123,__LINE__, 0x40240000, 0x00000000, 0x40223333, 0x3333332f},			/* 10.0000=f(9.10000)*/
-{14, 0,123,__LINE__, 0x40260000, 0x00000000, 0x40259999, 0x99999995},			/* 11.0000=f(10.8000)*/
-{14, 0,123,__LINE__, 0x402a0000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 13.0000=f(12.5000)*/
-{14, 0,123,__LINE__, 0x402e0000, 0x00000000, 0x402c6666, 0x66666661},			/* 15.0000=f(14.2000)*/
-{11, 0,123,__LINE__, 0x40300000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 16.0000=f(15.9000)*/
-{14, 0,123,__LINE__, 0x40320000, 0x00000000, 0x40319999, 0x99999997},			/* 18.0000=f(17.6000)*/
-{13, 0,123,__LINE__, 0x40340000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 20.0000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40350000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 21.0000=f(21.0000)*/
-{15, 0,123,__LINE__, 0x40370000, 0x00000000, 0x4036b333, 0x33333330},			/* 23.0000=f(22.7000)*/
-{15, 0,123,__LINE__, 0x40390000, 0x00000000, 0x40386666, 0x66666663},			/* 25.0000=f(24.4000)*/
-{15, 0,123,__LINE__, 0x403b0000, 0x00000000, 0x403a1999, 0x99999996},			/* 27.0000=f(26.1000)*/
-{13, 0,123,__LINE__, 0x403c0000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 28.0000=f(27.8000)*/
-{14, 0,123,__LINE__, 0x403e0000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 30.0000=f(29.5000)*/
-0,};
-test_ceilf(m)   {run_vector_1(m,ceilf_vec,(char *)(ceilf),"ceilf","ff");   }	
diff --git a/newlib/libm/test/conv_vec.c b/newlib/libm/test/conv_vec.c
deleted file mode 100644
index 1190e1b00..000000000
--- a/newlib/libm/test/conv_vec.c
+++ /dev/null
@@ -1,3640 +0,0 @@
-#include "test.h"
-
-double_type doubles[] =
-{
-__LINE__, " -211.8+",   -2.1180000000e+02, 7,
-__LINE__, "-3267-45",   -3.2670000000e+03, 5,
-__LINE__, "-45 .32",   -4.5000000000e+01, 3,
-__LINE__, "-45-",   -4.5000000000e+01, 3,
-__LINE__, "-45.",   -4.5000000000e+01, 4,
-__LINE__, "-67e+32",   -6.7000000000e+33, 7,
-__LINE__, "-67.32 ",   -6.7320000000e+01, 6,
-__LINE__, " ",    0.0000000000e+00, 0,
-__LINE__, " +",    0.0000000000e+00, 0,
-__LINE__, " +-",    0.0000000000e+00, 0,
-__LINE__, " -e",    0.0000000000e+00, 0,
-__LINE__, " .",    0.0000000000e+00,0,
-__LINE__, " .- -32",    0.0000000000e+00,0,
-__LINE__, " e",    0.0000000000e+00, 0,
-__LINE__, " e+67",    0.0000000000e+00, 0,
-__LINE__, " e-45",    0.0000000000e+00, 0,
-__LINE__, " e-67.-",    0.0000000000e+00, 0,
-__LINE__, " e.+",    0.0000000000e+00, 0,
-__LINE__, "+ . ",    0.0000000000e+00, 0,
-__LINE__, "+ e-e-",    0.0000000000e+00, 0,
-__LINE__, "+",    0.0000000000e+00, 0,
-__LINE__, "++ 45ee",    0.0000000000e+00, 0,
-__LINE__, "++ e",    0.0000000000e+00, 0,
-__LINE__, "++",    0.0000000000e+00, 0,
-__LINE__, "++e32",    0.0000000000e+00, 0,
-__LINE__, "++ee+67",    0.0000000000e+00, 0,
-__LINE__, "+- ",    0.0000000000e+00, 0,
-__LINE__, "+---.",    0.0000000000e+00, 0,
-__LINE__, "+.",    0.0000000000e+00,0,
-__LINE__, "+..45",    0.0000000000e+00,0,
-__LINE__, "+.e67",    0.0000000000e+00,0,
-__LINE__, "+e",    0.0000000000e+00, 0,
-__LINE__, "+ee ",    0.0000000000e+00, 0,
-__LINE__, "+ee.++",    0.0000000000e+00, 0,
-__LINE__, "- ",    0.0000000000e+00, 0,
-__LINE__, "- 32.",    0.0000000000e+00, 0,
-__LINE__, "-",    0.0000000000e+00, 0,
-__LINE__, "-+-+--",    0.0000000000e+00, 0,
-__LINE__, "-+4545",    0.0000000000e+00, 0,
-__LINE__, "--",    0.0000000000e+00, 0,
-__LINE__, "--32e",    0.0000000000e+00, 0,
-__LINE__, "--45+e45",    0.0000000000e+00, 0,
-__LINE__, "-.  ",    0.0000000000e+00,0,
-__LINE__, "-. ",    0.0000000000e+00,0,
-__LINE__, "-.",    0.0000000000e+00,0,
-__LINE__, "-.--",    0.0000000000e+00,0,
-__LINE__, "-e ",    0.0000000000e+00, 0,
-__LINE__, "-e",    0.0000000000e+00, 0,
-__LINE__, "-e+",    0.0000000000e+00, 0,
-__LINE__, "-e.- ",    0.0000000000e+00, 0,
-__LINE__, ". 45-",    0.0000000000e+00,0,
-__LINE__, ". e-32",    0.0000000000e+00,0,
-__LINE__, ".",    0.0000000000e+00,0,
-__LINE__, ".+  32",    0.0000000000e+00,0,
-__LINE__, ".++",    0.0000000000e+00,0,
-__LINE__, ".+.ee",    0.0000000000e+00,0,
-__LINE__, ".+e",    0.0000000000e+00,0,
-__LINE__, ".- 67e",    0.0000000000e+00,0,
-__LINE__, "..",    0.0000000000e+00,0,
-__LINE__, "..45673267",    0.0000000000e+00,0,
-__LINE__, "..6767",    0.0000000000e+00,0,
-__LINE__, ".e45  32",    0.0000000000e+00,0,
-__LINE__, ".e67 ",    0.0000000000e+00,0,
-__LINE__, ".e67.32-",    0.0000000000e+00,0,
-__LINE__, ".ee.",    0.0000000000e+00,0,
-__LINE__, "e  45e",    0.0000000000e+00, 0,
-__LINE__, "e +",    0.0000000000e+00, 0,
-__LINE__, "e 3245-",    0.0000000000e+00, 0,
-__LINE__, "e",    0.0000000000e+00, 0,
-__LINE__, "e+45",    0.0000000000e+00, 0,
-__LINE__, "e+45--",    0.0000000000e+00, 0,
-__LINE__, "e-6745.",    0.0000000000e+00, 0,
-__LINE__, "e-e",    0.0000000000e+00, 0,
-
-__LINE__, "e. ",    0.0000000000e+00, 0,
-__LINE__, "e.+",    0.0000000000e+00, 0,
-__LINE__, "e.-.-",    0.0000000000e+00, 0,
-__LINE__, "e32",    0.0000000000e+00, 0,
-__LINE__, "e32.e",    0.0000000000e+00, 0,
-__LINE__, "e45 45.67",    0.0000000000e+00, 0,
-__LINE__, "e45",    0.0000000000e+00, 0,
-__LINE__, "e45+.6767",    0.0000000000e+00, 0,
-__LINE__, "e45.67+32",    0.0000000000e+00, 0,
-__LINE__, "e45ee+-",    0.0000000000e+00, 0,
-__LINE__, "e67",    0.0000000000e+00, 0,
-__LINE__, "e6745+  ",    0.0000000000e+00, 0,
-__LINE__, "e6745e",    0.0000000000e+00, 0,
-__LINE__, "e67e-e ",    0.0000000000e+00, 0,
-__LINE__, "ee +",    0.0000000000e+00, 0,
-__LINE__, "  32.",    3.2000000000e+01, 5,
-__LINE__, " +32",    3.2000000000e+01, 4,
-__LINE__, "+32+",    3.2000000000e+01, 3,
-__LINE__, "+32+++",    3.2000000000e+01, 3,
-__LINE__, "32  32",    3.2000000000e+01, 2,
-__LINE__, "32 . . ",    3.2000000000e+01, 2,
-__LINE__, "32 45.",    3.2000000000e+01, 2,
-__LINE__, "32",    3.2000000000e+01, 2,
-__LINE__, "32+",    3.2000000000e+01, 2,
-__LINE__, "32++.67-",    3.2000000000e+01, 2,
-__LINE__, "32+.3267+",    3.2000000000e+01, 2,
-__LINE__, "32+45e32 ",    3.2000000000e+01, 2,
-__LINE__, "32+e67",    3.2000000000e+01, 2,
-__LINE__, "32- +6732",    3.2000000000e+01, 2,
-__LINE__, "32- -",    3.2000000000e+01, 2,
-__LINE__, "32-+-+32",    3.2000000000e+01, 2,
-__LINE__, "32-+32",    3.2000000000e+01, 2,
-__LINE__, "32--32.67",    3.2000000000e+01, 2,
-__LINE__, "32--67",    3.2000000000e+01, 2,
-__LINE__, "32..4545",    3.2000000000e+01, 3,
-__LINE__, "32.e",    3.2000000000e+01, 3,
-__LINE__, ".32 .32",    3.2000000000e-01, 3,
-__LINE__, ".32.",    3.2000000000e-01, 3,
-__LINE__, "3232 e",    3.2320000000e+03, 4,
-__LINE__, "3232",    3.2320000000e+03, 4,
-__LINE__, "323232+.45",    3.2323200000e+05, 6,
-__LINE__, "32.45",    3.2450000000e+01, 5,
-__LINE__, "32.45--",    3.2450000000e+01, 5,
-__LINE__, "324532",    3.2453200000e+05, 6,
-__LINE__, "324567-45",    3.2456700000e+05, 6,
-__LINE__, " 3267+45",    3.2670000000e+03, 5,
-__LINE__, "3267-",    3.2670000000e+03, 4,
-__LINE__, " 45",    4.5000000000e+01, 3,
-__LINE__, "45  67e",    4.5000000000e+01, 2,
-__LINE__, "45 45 45",    4.5000000000e+01, 2,
-__LINE__, "45 45",    4.5000000000e+01, 2,
-__LINE__, "45 e+32",    4.5000000000e+01, 2,
-__LINE__, "45",    4.5000000000e+01, 2,
-__LINE__, "45+ .32",    4.5000000000e+01, 2,
-__LINE__, "45+.4545",    4.5000000000e+01, 2,
-__LINE__, "45- -67.",    4.5000000000e+01, 2,
-__LINE__, "45- 32",    4.5000000000e+01, 2,
-__LINE__, "45-",    4.5000000000e+01, 2,
-__LINE__, "45-.+",    4.5000000000e+01, 2,
-__LINE__, "45-.+..",    4.5000000000e+01, 2,
-__LINE__, "45e",    4.5000000000e+01, 2,
-__LINE__, "45e32",    4.5000000000e+33, 5,
-__LINE__, "4532",    4.5320000000e+03, 4,
-__LINE__, "+4545--",    4.5450000000e+03, 5,
-__LINE__, "4545",    4.5450000000e+03, 4,
-__LINE__, "4545-+",    4.5450000000e+03, 4,
-__LINE__, "45.45",    4.5450000000e+01, 5,
-__LINE__, "454532+.45",    4.5453200000e+05, 6,
-__LINE__, "45454567324",    4.5454567324e+10, 11,
-__LINE__, "45456767",    4.5456767000e+07, 8,
-__LINE__, "+4567",    4.5670000000e+03, 5,
-__LINE__, "4567",    4.5670000000e+03, 4,
-__LINE__, " +456732",    4.5673200000e+05, 8,
-__LINE__, "456732e",    4.5673200000e+05, 6,
-__LINE__, "456767.",    4.5676700000e+05, 7,
-__LINE__, "  67. 45",    6.7000000000e+01, 5,
-__LINE__, " +67-45",    6.7000000000e+01, 4,
-__LINE__, " 67 ",    6.7000000000e+01, 3,
-__LINE__, " 67e -",    6.7000000000e+01, 3,
-__LINE__, "+67+",    6.7000000000e+01, 3,
-__LINE__, "+67+4567",    6.7000000000e+01, 3,
-__LINE__, "+67-",    6.7000000000e+01, 3,
-__LINE__, "67 -",    6.7000000000e+01, 2,
-__LINE__, "67 32",    6.7000000000e+01, 2,
-__LINE__, "67 6745",    6.7000000000e+01, 2,
-__LINE__, "67",    6.7000000000e+01, 2,
-__LINE__, "67+",    6.7000000000e+01, 2,
-__LINE__, "67+-3267",    6.7000000000e+01, 2,
-__LINE__, "67+3232 .",    6.7000000000e+01, 2,
-__LINE__, "67-",    6.7000000000e+01, 2,
-__LINE__, "67-32e45 ",    6.7000000000e+01, 2,
-__LINE__, "67e ",    6.7000000000e+01, 2,
-__LINE__, "67ee",    6.7000000000e+01, 2,
-__LINE__, ".67",    6.7000000000e-01, 3,
-__LINE__, "6732",    6.7320000000e+03, 4,
-__LINE__, "6732e32",    6.7320000000e+35, 7,
-__LINE__, "+673267-",    6.7326700000e+05, 7,
-__LINE__, "67326767",    6.7326767000e+07, 8,
-__LINE__, "6745+e67",    6.7450000000e+03, 4,
-__LINE__, "6745..e",    6.7450000000e+03, 5,
-__LINE__, "6745ee",    6.7450000000e+03, 4,
-__LINE__, "+6767",    6.7670000000e+03, 5,
-__LINE__, "6767",    6.7670000000e+03, 4,
-__LINE__, "676767+",    6.7676700000e+05, 6,
-__LINE__, " -01",   -1.0000000000e+00, 4,
-__LINE__, " -1",   -1.0000000000e+00, 3,
-__LINE__, "-01",   -1.0000000000e+00, 3,
-__LINE__, "-1",   -1.0000000000e+00, 2,
-__LINE__, " -.1",   -1.0000000000e-01, 4,
-__LINE__, " -0.1",   -1.0000000000e-01, 5,
-__LINE__, "-.1",   -1.0000000000e-01, 3,
-__LINE__, "-0.1",   -1.0000000000e-01, 4,
-__LINE__, " -01241e-1",   -1.2410000000e+02, 10,
-__LINE__, " -1241e-1",   -1.2410000000e+02, 9,
-__LINE__, "-01241e-1",   -1.2410000000e+02, 9,
-__LINE__, "-1241e-1",   -1.2410000000e+02, 8,
-__LINE__, " -.1241e-1",   -1.2410000000e-02, 10,
-__LINE__, " -0.1241e-1",   -1.2410000000e-02, 11,
-__LINE__, "-.1241e-1",   -1.2410000000e-02, 9,
-__LINE__, "-0.1241e-1",   -1.2410000000e-02, 10,
-__LINE__, " -01241e-20",   -1.2410000000e-17, 11,
-__LINE__, " -1241e-20",   -1.2410000000e-17, 10,
-__LINE__, "-01241e-20",   -1.2410000000e-17, 10,
-__LINE__, "-1241e-20",   -1.2410000000e-17, 9,
-__LINE__, " -.1241e+1",   -1.2410000000e+00, 10,
-__LINE__, " -.1241e1",   -1.2410000000e+00, 9,
-__LINE__, " -0.1241e+1",   -1.2410000000e+00, 11,
-__LINE__, " -0.1241e1",   -1.2410000000e+00, 10,
-__LINE__, "-.1241e+1",   -1.2410000000e+00, 9,
-__LINE__, "-.1241e1",   -1.2410000000e+00, 8,
-__LINE__, "-0.1241e+1",   -1.2410000000e+00, 10,
-__LINE__, "-0.1241e1",   -1.2410000000e+00, 9,
-__LINE__, " -01241",   -1.2410000000e+03, 7,
-__LINE__, " -01241+",   -1.2410000000e+03, 7,
-__LINE__, " -01241+1",   -1.2410000000e+03, 7,
-__LINE__, " -01241+20",   -1.2410000000e+03, 7,
-__LINE__, " -01241-",   -1.2410000000e+03, 7,
-__LINE__, " -01241-1",   -1.2410000000e+03, 7,
-__LINE__, " -01241-20",   -1.2410000000e+03, 7,
-__LINE__, " -01241e",   -1.2410000000e+03, 7,
-__LINE__, " -01241e+",   -1.2410000000e+03, 7,
-__LINE__, " -01241e-",   -1.2410000000e+03, 7,
-__LINE__, " -1241",   -1.2410000000e+03, 6,
-__LINE__, " -1241+",   -1.2410000000e+03, 6,
-__LINE__, " -1241+1",   -1.2410000000e+03, 6,
-__LINE__, " -1241+20",   -1.2410000000e+03, 6,
-__LINE__, " -1241-",   -1.2410000000e+03, 6,
-__LINE__, " -1241-1",   -1.2410000000e+03, 6,
-__LINE__, " -1241-20",   -1.2410000000e+03, 6,
-__LINE__, " -1241e",   -1.2410000000e+03, 6,
-__LINE__, " -1241e+",   -1.2410000000e+03, 6,
-__LINE__, " -1241e-",   -1.2410000000e+03, 6,
-__LINE__, "-01241",   -1.2410000000e+03, 6,
-__LINE__, "-01241+",   -1.2410000000e+03, 6,
-__LINE__, "-01241+1",   -1.2410000000e+03, 6,
-__LINE__, "-01241+20",   -1.2410000000e+03, 6,
-__LINE__, "-01241-",   -1.2410000000e+03, 6,
-__LINE__, "-01241-1",   -1.2410000000e+03, 6,
-__LINE__, "-01241-20",   -1.2410000000e+03, 6,
-__LINE__, "-01241e",   -1.2410000000e+03, 6,
-__LINE__, "-01241e+",   -1.2410000000e+03, 6,
-__LINE__, "-01241e-",   -1.2410000000e+03, 6,
-__LINE__, "-1241",   -1.2410000000e+03, 5,
-__LINE__, "-1241+",   -1.2410000000e+03, 5,
-__LINE__, "-1241+1",   -1.2410000000e+03, 5,
-__LINE__, "-1241+20",   -1.2410000000e+03, 5,
-__LINE__, "-1241-",   -1.2410000000e+03, 5,
-__LINE__, "-1241-1",   -1.2410000000e+03, 5,
-__LINE__, "-1241-20",   -1.2410000000e+03, 5,
-__LINE__, "-1241e",   -1.2410000000e+03, 5,
-__LINE__, "-1241e+",   -1.2410000000e+03, 5,
-__LINE__, "-1241e-",   -1.2410000000e+03, 5,
-__LINE__, " -01241e+1",   -1.2410000000e+04, 10,
-__LINE__, " -01241e1",   -1.2410000000e+04, 9,
-__LINE__, " -1241e+1",   -1.2410000000e+04, 9,
-__LINE__, " -1241e1",   -1.2410000000e+04, 8,
-__LINE__, "-01241e+1",   -1.2410000000e+04, 9,
-__LINE__, "-01241e1",   -1.2410000000e+04, 8,
-__LINE__, "-1241e+1",   -1.2410000000e+04, 8,
-__LINE__, "-1241e1",   -1.2410000000e+04, 7,
-__LINE__, " -.1241e+20",   -1.2410000000e+19, 11,
-__LINE__, " -.1241e20",   -1.2410000000e+19, 10,
-__LINE__, " -0.1241e+20",   -1.2410000000e+19, 12,
-__LINE__, " -0.1241e20",   -1.2410000000e+19, 11,
-__LINE__, "-.1241e+20",   -1.2410000000e+19, 10,
-__LINE__, "-.1241e20",   -1.2410000000e+19, 9,
-__LINE__, "-0.1241e+20",   -1.2410000000e+19, 11,
-__LINE__, "-0.1241e20",   -1.2410000000e+19, 10,
-__LINE__, " -01241e+20",   -1.2410000000e+23, 11,
-__LINE__, " -01241e20",   -1.2410000000e+23, 10,
-__LINE__, " -1241e+20",   -1.2410000000e+23, 10,
-__LINE__, " -1241e20",   -1.2410000000e+23, 9,
-__LINE__, "-01241e+20",   -1.2410000000e+23, 10,
-__LINE__, "-01241e20",   -1.2410000000e+23, 9,
-__LINE__, "-1241e+20",   -1.2410000000e+23, 9,
-__LINE__, "-1241e20",   -1.2410000000e+23, 8,
-__LINE__, " -.1241",   -1.2410000000e-01, 7,
-__LINE__, " -.1241+",   -1.2410000000e-01, 7,
-__LINE__, " -.1241+1",   -1.2410000000e-01, 7,
-__LINE__, " -.1241+20",   -1.2410000000e-01, 7,
-__LINE__, " -.1241-",   -1.2410000000e-01, 7,
-__LINE__, " -.1241-1",   -1.2410000000e-01, 7,
-__LINE__, " -.1241-20",   -1.2410000000e-01, 7,
-
-__LINE__, " -.1241e",   -1.2410000000e-01, 7,
-__LINE__, " -.1241e+",   -1.2410000000e-01, 7,
-__LINE__, " -.1241e-",   -1.2410000000e-01, 7,
-__LINE__, " -0.1241",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241+",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241+1",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241+20",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241-",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241-1",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241-20",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241e",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241e+",   -1.2410000000e-01, 8,
-__LINE__, " -0.1241e-",   -1.2410000000e-01, 8,
-__LINE__, "-.1241",   -1.2410000000e-01, 6,
-__LINE__, "-.1241+",   -1.2410000000e-01, 6,
-__LINE__, "-.1241+1",   -1.2410000000e-01, 6,
-__LINE__, "-.1241+20",   -1.2410000000e-01, 6,
-__LINE__, "-.1241-",   -1.2410000000e-01, 6,
-__LINE__, "-.1241-1",   -1.2410000000e-01, 6,
-__LINE__, "-.1241-20",   -1.2410000000e-01, 6,
-__LINE__, "-.1241e",   -1.2410000000e-01, 6,
-__LINE__, "-.1241e+",   -1.2410000000e-01, 6,
-__LINE__, "-.1241e-",   -1.2410000000e-01, 6,
-__LINE__, "-0.1241",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241+",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241+1",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241+20",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241-",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241-1",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241-20",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241e",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241e+",   -1.2410000000e-01, 7,
-__LINE__, "-0.1241e-",   -1.2410000000e-01, 7,
-__LINE__, " -.1241e-20",   -1.2410000000e-21, 11,
-__LINE__, " -0.1241e-20",   -1.2410000000e-21, 12,
-__LINE__, "-.1241e-20",   -1.2410000000e-21, 10,
-__LINE__, "-0.1241e-20",   -1.2410000000e-21, 11,
-__LINE__, " -.12411",   -1.2411000000e-01, 8,
-__LINE__, " -0.12411",   -1.2411000000e-01, 9,
-__LINE__, "-.12411",   -1.2411000000e-01, 7,
-__LINE__, "-0.12411",   -1.2411000000e-01, 8,
-__LINE__, " -012411",   -1.2411000000e+04, 8,
-__LINE__, " -12411",   -1.2411000000e+04, 7,
-__LINE__, "-012411",   -1.2411000000e+04, 7,
-__LINE__, "-12411",   -1.2411000000e+04, 6,
-__LINE__, " -.124120",   -1.2412000000e-01, 9,
-__LINE__, " -0.124120",   -1.2412000000e-01, 10,
-__LINE__, "-.124120",   -1.2412000000e-01, 8,
-__LINE__, "-0.124120",   -1.2412000000e-01, 9,
-__LINE__, " -0124120",   -1.2412000000e+05, 9,
-__LINE__, " -124120",   -1.2412000000e+05, 8,
-__LINE__, "-0124120",   -1.2412000000e+05, 8,
-__LINE__, "-124120",   -1.2412000000e+05, 7,
-__LINE__, " -020",   -2.0000000000e+01, 5,
-__LINE__, " -20",   -2.0000000000e+01, 4,
-__LINE__, "-020",   -2.0000000000e+01, 4,
-__LINE__, "-20",   -2.0000000000e+01, 3,
-__LINE__, " -.20",   -2.0000000000e-01, 5,
-__LINE__, " -0.20",   -2.0000000000e-01, 6,
-__LINE__, "-.20",   -2.0000000000e-01, 4,
-__LINE__, "-0.20",   -2.0000000000e-01, 5,
-__LINE__, " -211",   -2.1100000000e+02, 5,
-__LINE__, " -211+",   -2.1100000000e+02, 5,
-__LINE__, " -211+1",   -2.1100000000e+02, 5,
-__LINE__, " -211+20",   -2.1100000000e+02, 5,
-__LINE__, " -211-",   -2.1100000000e+02, 5,
-__LINE__, " -211-1",   -2.1100000000e+02, 5,
-__LINE__, " -211-20",   -2.1100000000e+02, 5,
-__LINE__, " -211.",   -2.1100000000e+02, 6,
-__LINE__, " -211.+",   -2.1100000000e+02, 6,
-__LINE__, " -211.+1",   -2.1100000000e+02, 6,
-__LINE__, " -211.+20",   -2.1100000000e+02, 6,
-__LINE__, " -211.-",   -2.1100000000e+02, 6,
-__LINE__, " -211.-1",   -2.1100000000e+02, 6,
-__LINE__, " -211.-20",   -2.1100000000e+02, 6,
-__LINE__, " -211.e",   -2.1100000000e+02, 6,
-__LINE__, " -211.e+",   -2.1100000000e+02, 6,
-__LINE__, " -211.e-",   -2.1100000000e+02, 6,
-__LINE__, " -211e",   -2.1100000000e+02, 5,
-__LINE__, " -211e+",   -2.1100000000e+02, 5,
-__LINE__, " -211e-",   -2.1100000000e+02, 5,
-__LINE__, "-211",   -2.1100000000e+02, 4,
-__LINE__, "-211+",   -2.1100000000e+02, 4,
-__LINE__, "-211+1",   -2.1100000000e+02, 4,
-__LINE__, "-211+20",   -2.1100000000e+02, 4,
-__LINE__, "-211-",   -2.1100000000e+02, 4,
-__LINE__, "-211-1",   -2.1100000000e+02, 4,
-__LINE__, "-211-20",   -2.1100000000e+02, 4,
-__LINE__, "-211.",   -2.1100000000e+02, 5,
-__LINE__, "-211.+",   -2.1100000000e+02, 5,
-__LINE__, "-211.+1",   -2.1100000000e+02, 5,
-__LINE__, "-211.+20",   -2.1100000000e+02, 5,
-__LINE__, "-211.-",   -2.1100000000e+02, 5,
-__LINE__, "-211.-1",   -2.1100000000e+02, 5,
-__LINE__, "-211.-20",   -2.1100000000e+02, 5,
-__LINE__, "-211.e",   -2.1100000000e+02, 5,
-__LINE__, "-211.e+",   -2.1100000000e+02, 5,
-__LINE__, "-211.e-",   -2.1100000000e+02, 5,
-__LINE__, "-211e",   -2.1100000000e+02, 4,
-__LINE__, "-211e+",   -2.1100000000e+02, 4,
-__LINE__, "-211e-",   -2.1100000000e+02, 4,
-__LINE__, " -211.e+20",   -2.1100000000e+22, 10,
-__LINE__, " -211.e20",   -2.1100000000e+22, 9,
-__LINE__, " -211e+20",   -2.1100000000e+22, 9,
-__LINE__, " -211e20",   -2.1100000000e+22, 8,
-__LINE__, "-211.e+20",   -2.1100000000e+22, 9,
-__LINE__, "-211.e20",   -2.1100000000e+22, 8,
-__LINE__, "-211e+20",   -2.1100000000e+22, 8,
-__LINE__, "-211e20",   -2.1100000000e+22, 7,
-__LINE__, " -211.e-1",   -2.1100000000e+01, 9,
-__LINE__, " -211e-1",   -2.1100000000e+01, 8,
-__LINE__, "-211.e-1",   -2.1100000000e+01, 8,
-__LINE__, "-211e-1",   -2.1100000000e+01, 7,
-__LINE__, " -211.e+1",   -2.1100000000e+03, 9,
-__LINE__, " -211.e1",   -2.1100000000e+03, 8,
-__LINE__, " -211e+1",   -2.1100000000e+03, 8,
-__LINE__, " -211e1",   -2.1100000000e+03, 7,
-__LINE__, "-211.e+1",   -2.1100000000e+03, 8,
-__LINE__, "-211.e1",   -2.1100000000e+03, 7,
-__LINE__, "-211e+1",   -2.1100000000e+03, 7,
-__LINE__, "-211e1",   -2.1100000000e+03, 6,
-__LINE__, " -211.e-20",   -2.1100000000e-18, 10,
-__LINE__, " -211e-20",   -2.1100000000e-18, 9,
-__LINE__, "-211.e-20",   -2.1100000000e-18, 9,
-__LINE__, "-211e-20",   -2.1100000000e-18, 8,
-__LINE__, " -211.1",   -2.1110000000e+02, 7,
-__LINE__, "-211.1",   -2.1110000000e+02, 6,
-__LINE__, " -2111",   -2.1110000000e+03, 6,
-__LINE__, "-2111",   -2.1110000000e+03, 5,
-__LINE__, " -2111241e-20",   -2.1112410000e-14, 13,
-__LINE__, "-2111241e-20",   -2.1112410000e-14, 12,
-__LINE__, " -211.1241e-1",   -2.1112410000e+01, 13,
-__LINE__, "-211.1241e-1",   -2.1112410000e+01, 12,
-__LINE__, " -211.1241",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241+",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241+1",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241+20",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241-",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241-1",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241-20",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241e",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241e+",   -2.1112410000e+02, 10,
-__LINE__, " -211.1241e-",   -2.1112410000e+02, 10,
-__LINE__, "-211.1241",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241+",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241+1",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241+20",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241-",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241-1",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241-20",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241e",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241e+",   -2.1112410000e+02, 9,
-__LINE__, "-211.1241e-",   -2.1112410000e+02, 9,
-__LINE__, " -211.1241e+1",   -2.1112410000e+03, 13,
-__LINE__, " -211.1241e1",   -2.1112410000e+03, 12,
-__LINE__, "-211.1241e+1",   -2.1112410000e+03, 12,
-__LINE__, "-211.1241e1",   -2.1112410000e+03, 11,
-__LINE__, " -2111241e-1",   -2.1112410000e+05, 12,
-__LINE__, "-2111241e-1",   -2.1112410000e+05, 11,
-__LINE__, " -2111241",   -2.1112410000e+06, 9,
-__LINE__, " -2111241+",   -2.1112410000e+06, 9,
-__LINE__, " -2111241+1",   -2.1112410000e+06, 9,
-__LINE__, " -2111241+20",   -2.1112410000e+06, 9,
-__LINE__, " -2111241-",   -2.1112410000e+06, 9,
-__LINE__, " -2111241-1",   -2.1112410000e+06, 9,
-__LINE__, " -2111241-20",   -2.1112410000e+06, 9,
-__LINE__, " -2111241e",   -2.1112410000e+06, 9,
-__LINE__, " -2111241e+",   -2.1112410000e+06, 9,
-__LINE__, " -2111241e-",   -2.1112410000e+06, 9,
-__LINE__, "-2111241",   -2.1112410000e+06, 8,
-__LINE__, "-2111241+",   -2.1112410000e+06, 8,
-__LINE__, "-2111241+1",   -2.1112410000e+06, 8,
-__LINE__, "-2111241+20",   -2.1112410000e+06, 8,
-__LINE__, "-2111241-",   -2.1112410000e+06, 8,
-__LINE__, "-2111241-1",   -2.1112410000e+06, 8,
-__LINE__, "-2111241-20",   -2.1112410000e+06, 8,
-__LINE__, "-2111241e",   -2.1112410000e+06, 8,
-__LINE__, "-2111241e+",   -2.1112410000e+06, 8,
-__LINE__, "-2111241e-",   -2.1112410000e+06, 8,
-__LINE__, " -2111241e+1",   -2.1112410000e+07, 12,
-__LINE__, " -2111241e1",   -2.1112410000e+07, 11,
-__LINE__, "-2111241e+1",   -2.1112410000e+07, 11,
-__LINE__, "-2111241e1",   -2.1112410000e+07, 10,
-__LINE__, " -211.1241e+20",   -2.1112410000e+22, 14,
-__LINE__, " -211.1241e20",   -2.1112410000e+22, 13,
-__LINE__, "-211.1241e+20",   -2.1112410000e+22, 13,
-__LINE__, "-211.1241e20",   -2.1112410000e+22, 12,
-__LINE__, " -2111241e+20",   -2.1112410000e+26, 13,
-__LINE__, " -2111241e20",   -2.1112410000e+26, 12,
-__LINE__, "-2111241e+20",   -2.1112410000e+26, 12,
-__LINE__, "-2111241e20",   -2.1112410000e+26, 11,
-__LINE__, " -211.1241e-20",   -2.1112410000e-18, 14,
-__LINE__, "-211.1241e-20",   -2.1112410000e-18, 13,
-__LINE__, " -211.12411",   -2.1112411000e+02, 11,
-__LINE__, "-211.12411",   -2.1112411000e+02, 10,
-__LINE__, " -21112411",   -2.1112411000e+07, 10,
-__LINE__, "-21112411",   -2.1112411000e+07, 9,
-__LINE__, " -211124120",   -2.1112412000e+08, 11,
-__LINE__, "-211124120",   -2.1112412000e+08, 10,
-__LINE__, " -211.124120",   -2.1112412000e+02, 12,
-__LINE__, "-211.124120",   -2.1112412000e+02, 11,
-__LINE__, " -211.20",   -2.1120000000e+02, 8,
-__LINE__, "-211.20",   -2.1120000000e+02, 7,
-__LINE__, " -21120",   -2.1120000000e+04, 7,
-__LINE__, "-21120",   -2.1120000000e+04, 6,
-__LINE__, " -211.8e-1",   -2.1180000000e+01, 10,
-__LINE__, "-211.8e-1",   -2.1180000000e+01, 9,
-__LINE__, " -211.8e+1",   -2.1180000000e+03, 10,
-__LINE__, " -211.8e1",   -2.1180000000e+03, 9,
-__LINE__, " -2118",   -2.1180000000e+03, 6,
-__LINE__, " -2118+",   -2.1180000000e+03, 6,
-__LINE__, " -2118+1",   -2.1180000000e+03, 6,
-__LINE__, " -2118+20",   -2.1180000000e+03, 6,
-__LINE__, " -2118-",   -2.1180000000e+03, 6,
-__LINE__, " -2118-1",   -2.1180000000e+03, 6,
-__LINE__, " -2118-20",   -2.1180000000e+03, 6,
-__LINE__, " -2118e",   -2.1180000000e+03, 6,
-__LINE__, " -2118e+",   -2.1180000000e+03, 6,
-__LINE__, " -2118e-",   -2.1180000000e+03, 6,
-__LINE__, "-211.8e+1",   -2.1180000000e+03, 9,
-__LINE__, "-211.8e1",   -2.1180000000e+03, 8,
-__LINE__, "-2118",   -2.1180000000e+03, 5,
-__LINE__, "-2118+",   -2.1180000000e+03, 5,
-__LINE__, "-2118+1",   -2.1180000000e+03, 5,
-__LINE__, "-2118+20",   -2.1180000000e+03, 5,
-__LINE__, "-2118-",   -2.1180000000e+03, 5,
-__LINE__, "-2118-1",   -2.1180000000e+03, 5,
-__LINE__, "-2118-20",   -2.1180000000e+03, 5,
-__LINE__, "-2118e",   -2.1180000000e+03, 5,
-__LINE__, "-2118e+",   -2.1180000000e+03, 5,
-__LINE__, "-2118e-",   -2.1180000000e+03, 5,
-__LINE__, " -2118e+1",   -2.1180000000e+04, 9,
-__LINE__, " -2118e1",   -2.1180000000e+04, 8,
-__LINE__, "-2118e+1",   -2.1180000000e+04, 8,
-__LINE__, "-2118e1",   -2.1180000000e+04, 7,
-__LINE__, " -2118e+20",   -2.1180000000e+23, 10,
-__LINE__, " -2118e20",   -2.1180000000e+23, 9,
-__LINE__, "-2118e+20",   -2.1180000000e+23, 9,
-__LINE__, "-2118e20",   -2.1180000000e+23, 8,
-__LINE__, " -2118e-20",   -2.1180000000e-17, 10,
-__LINE__, "-2118e-20",   -2.1180000000e-17, 9,
-__LINE__, " -211.8e-20",   -2.1180000000e-18, 11,
-__LINE__, "-211.8e-20",   -2.1180000000e-18, 10,
-__LINE__, " -211.8",   -2.1180000000e+02, 7,
-__LINE__, " -211.8+",   -2.1180000000e+02, 7,
-__LINE__, " -211.8+1",   -2.1180000000e+02, 7,
-__LINE__, " -211.8+20",   -2.1180000000e+02, 7,
-__LINE__, " -211.8-",   -2.1180000000e+02, 7,
-__LINE__, " -211.8-1",   -2.1180000000e+02, 7,
-__LINE__, " -211.8-20",   -2.1180000000e+02, 7,
-__LINE__, " -211.8e",   -2.1180000000e+02, 7,
-__LINE__, " -211.8e+",   -2.1180000000e+02, 7,
-__LINE__, " -211.8e-",   -2.1180000000e+02, 7,
-__LINE__, " -2118e-1",   -2.1180000000e+02, 9,
-__LINE__, "-211.8",   -2.1180000000e+02, 6,
-__LINE__, "-211.8+",   -2.1180000000e+02, 6,
-__LINE__, "-211.8+1",   -2.1180000000e+02, 6,
-__LINE__, "-211.8+20",   -2.1180000000e+02, 6,
-__LINE__, "-211.8-",   -2.1180000000e+02, 6,
-__LINE__, "-211.8-1",   -2.1180000000e+02, 6,
-
-__LINE__, "-211.8-20",   -2.1180000000e+02, 6,
-__LINE__, "-211.8e",   -2.1180000000e+02, 6,
-__LINE__, "-211.8e+",   -2.1180000000e+02, 6,
-__LINE__, "-211.8e-",   -2.1180000000e+02, 6,
-__LINE__, "-2118e-1",   -2.1180000000e+02, 8,
-__LINE__, " -211.8e+20",   -2.1180000000e+22, 11,
-__LINE__, " -211.8e20",   -2.1180000000e+22, 10,
-__LINE__, "-211.8e+20",   -2.1180000000e+22, 10,
-__LINE__, "-211.8e20",   -2.1180000000e+22, 9,
-__LINE__, " -211.81",   -2.1181000000e+02, 8,
-__LINE__, "-211.81",   -2.1181000000e+02, 7,
-__LINE__, " -21181",   -2.1181000000e+04, 7,
-__LINE__, "-21181",   -2.1181000000e+04, 6,
-__LINE__, " -211.820",   -2.1182000000e+02, 9,
-__LINE__, "-211.820",   -2.1182000000e+02, 8,
-__LINE__, " -211820",   -2.1182000000e+05, 8,
-__LINE__, "-211820",   -2.1182000000e+05, 7,
-__LINE__, " -2119e-20",   -2.1190000000e-17, 10,
-__LINE__, "-2119e-20",   -2.1190000000e-17, 9,
-__LINE__, " -211.9e-1",   -2.1190000000e+01, 10,
-__LINE__, "-211.9e-1",   -2.1190000000e+01, 9,
-__LINE__, " -211.9",   -2.1190000000e+02, 7,
-__LINE__, " -211.9+",   -2.1190000000e+02, 7,
-__LINE__, " -211.9+1",   -2.1190000000e+02, 7,
-__LINE__, " -211.9+20",   -2.1190000000e+02, 7,
-__LINE__, " -211.9-",   -2.1190000000e+02, 7,
-__LINE__, " -211.9-1",   -2.1190000000e+02, 7,
-__LINE__, " -211.9-20",   -2.1190000000e+02, 7,
-__LINE__, " -211.9e",   -2.1190000000e+02, 7,
-__LINE__, " -211.9e+",   -2.1190000000e+02, 7,
-__LINE__, " -211.9e-",   -2.1190000000e+02, 7,
-__LINE__, " -2119e-1",   -2.1190000000e+02, 9,
-__LINE__, "-211.9",   -2.1190000000e+02, 6,
-__LINE__, "-211.9+",   -2.1190000000e+02, 6,
-__LINE__, "-211.9+1",   -2.1190000000e+02, 6,
-__LINE__, "-211.9+20",   -2.1190000000e+02, 6,
-__LINE__, "-211.9-",   -2.1190000000e+02, 6,
-#ifndef __PCCNECV70__
-/* Nec assembler has built in limits which are exceeded by this table */
-
-__LINE__, "-211.9-1",   -2.1190000000e+02, 6,
-__LINE__, "-211.9-20",   -2.1190000000e+02, 6,
-__LINE__, "-211.9e",   -2.1190000000e+02, 6,
-__LINE__, "-211.9e+",   -2.1190000000e+02, 6,
-__LINE__, "-211.9e-",   -2.1190000000e+02, 6,
-__LINE__, "-2119e-1",   -2.1190000000e+02, 8,
-__LINE__, " -211.9e+1",   -2.1190000000e+03, 10,
-__LINE__, " -211.9e1",   -2.1190000000e+03, 9,
-__LINE__, " -2119",   -2.1190000000e+03, 6,
-__LINE__, " -2119+",   -2.1190000000e+03, 6,
-__LINE__, " -2119+1",   -2.1190000000e+03, 6,
-__LINE__, " -2119+20",   -2.1190000000e+03, 6,
-__LINE__, " -2119-",   -2.1190000000e+03, 6,
-__LINE__, " -2119-1",   -2.1190000000e+03, 6,
-__LINE__, " -2119-20",   -2.1190000000e+03, 6,
-__LINE__, " -2119e",   -2.1190000000e+03, 6,
-__LINE__, " -2119e+",   -2.1190000000e+03, 6,
-__LINE__, " -2119e-",   -2.1190000000e+03, 6,
-__LINE__, "-211.9e+1",   -2.1190000000e+03, 9,
-__LINE__, "-211.9e1",   -2.1190000000e+03, 8,
-__LINE__, "-2119",   -2.1190000000e+03, 5,
-__LINE__, "-2119+",   -2.1190000000e+03, 5,
-__LINE__, "-2119+1",   -2.1190000000e+03, 5,
-__LINE__, "-2119+20",   -2.1190000000e+03, 5,
-__LINE__, "-2119-",   -2.1190000000e+03, 5,
-__LINE__, "-2119-1",   -2.1190000000e+03, 5,
-__LINE__, "-2119-20",   -2.1190000000e+03, 5,
-__LINE__, "-2119e",   -2.1190000000e+03, 5,
-__LINE__, "-2119e+",   -2.1190000000e+03, 5,
-__LINE__, "-2119e-",   -2.1190000000e+03, 5,
-__LINE__, " -2119e+1",   -2.1190000000e+04, 9,
-__LINE__, " -2119e1",   -2.1190000000e+04, 8,
-__LINE__, "-2119e+1",   -2.1190000000e+04, 8,
-__LINE__, "-2119e1",   -2.1190000000e+04, 7,
-__LINE__, " -211.9e+20",   -2.1190000000e+22, 11,
-__LINE__, " -211.9e20",   -2.1190000000e+22, 10,
-__LINE__, "-211.9e+20",   -2.1190000000e+22, 10,
-__LINE__, "-211.9e20",   -2.1190000000e+22, 9,
-__LINE__, " -2119e+20",   -2.1190000000e+23, 10,
-__LINE__, " -2119e20",   -2.1190000000e+23, 9,
-__LINE__, "-2119e+20",   -2.1190000000e+23, 9,
-__LINE__, "-2119e20",   -2.1190000000e+23, 8,
-__LINE__, " -211.9e-20",   -2.1190000000e-18, 11,
-__LINE__, "-211.9e-20",   -2.1190000000e-18, 10,
-__LINE__, " -211.91",   -2.1191000000e+02, 8,
-__LINE__, "-211.91",   -2.1191000000e+02, 7,
-__LINE__, " -21191",   -2.1191000000e+04, 7,
-__LINE__, "-21191",   -2.1191000000e+04, 6,
-__LINE__, " -211.920",   -2.1192000000e+02, 9,
-__LINE__, "-211.920",   -2.1192000000e+02, 8,
-__LINE__, " -211920",   -2.1192000000e+05, 8,
-__LINE__, "-211920",   -2.1192000000e+05, 7,
-__LINE__, " -612.e-1",   -6.1200000000e+01, 9,
-__LINE__, " -612e-1",   -6.1200000000e+01, 8,
-__LINE__, "-612.e-1",   -6.1200000000e+01, 8,
-__LINE__, "-612e-1",   -6.1200000000e+01, 7,
-__LINE__, " -612",   -6.1200000000e+02, 5,
-__LINE__, " -612+",   -6.1200000000e+02, 5,
-__LINE__, " -612+1",   -6.1200000000e+02, 5,
-__LINE__, " -612+20",   -6.1200000000e+02, 5,
-__LINE__, " -612-",   -6.1200000000e+02, 5,
-__LINE__, " -612-1",   -6.1200000000e+02, 5,
-__LINE__, " -612-20",   -6.1200000000e+02, 5,
-__LINE__, " -612.",   -6.1200000000e+02, 6,
-__LINE__, " -612.+",   -6.1200000000e+02, 6,
-__LINE__, " -612.+1",   -6.1200000000e+02, 6,
-__LINE__, " -612.+20",   -6.1200000000e+02, 6,
-__LINE__, " -612.-",   -6.1200000000e+02, 6,
-__LINE__, " -612.-1",   -6.1200000000e+02, 6,
-__LINE__, " -612.-20",   -6.1200000000e+02, 6,
-__LINE__, " -612.e",   -6.1200000000e+02, 6,
-__LINE__, " -612.e+",   -6.1200000000e+02, 6,
-__LINE__, " -612.e-",   -6.1200000000e+02, 6,
-__LINE__, " -612e",   -6.1200000000e+02, 5,
-__LINE__, " -612e+",   -6.1200000000e+02, 5,
-__LINE__, " -612e-",   -6.1200000000e+02, 5,
-__LINE__, "-612",   -6.1200000000e+02, 4,
-__LINE__, "-612+",   -6.1200000000e+02, 4,
-__LINE__, "-612+1",   -6.1200000000e+02, 4,
-__LINE__, "-612+20",   -6.1200000000e+02, 4,
-__LINE__, "-612-",   -6.1200000000e+02, 4,
-__LINE__, "-612-1",   -6.1200000000e+02, 4,
-__LINE__, "-612-20",   -6.1200000000e+02, 4,
-__LINE__, "-612.",   -6.1200000000e+02, 5,
-__LINE__, "-612.+",   -6.1200000000e+02, 5,
-__LINE__, "-612.+1",   -6.1200000000e+02, 5,
-__LINE__, "-612.+20",   -6.1200000000e+02, 5,
-__LINE__, "-612.-",   -6.1200000000e+02, 5,
-__LINE__, "-612.-1",   -6.1200000000e+02, 5,
-__LINE__, "-612.-20",   -6.1200000000e+02, 5,
-__LINE__, "-612.e",   -6.1200000000e+02, 5,
-__LINE__, "-612.e+",   -6.1200000000e+02, 5,
-__LINE__, "-612.e-",   -6.1200000000e+02, 5,
-__LINE__, "-612e",   -6.1200000000e+02, 4,
-__LINE__, "-612e+",   -6.1200000000e+02, 4,
-__LINE__, "-612e-",   -6.1200000000e+02, 4,
-__LINE__, " -612.e+1",   -6.1200000000e+03, 9,
-__LINE__, " -612.e1",   -6.1200000000e+03, 8,
-__LINE__, " -612e+1",   -6.1200000000e+03, 8,
-__LINE__, " -612e1",   -6.1200000000e+03, 7,
-__LINE__, "-612.e+1",   -6.1200000000e+03, 8,
-__LINE__, "-612.e1",   -6.1200000000e+03, 7,
-__LINE__, "-612e+1",   -6.1200000000e+03, 7,
-__LINE__, "-612e1",   -6.1200000000e+03, 6,
-__LINE__, " -612.e+20",   -6.1200000000e+22, 10,
-__LINE__, " -612.e20",   -6.1200000000e+22, 9,
-__LINE__, " -612e+20",   -6.1200000000e+22, 9,
-__LINE__, " -612e20",   -6.1200000000e+22, 8,
-__LINE__, "-612.e+20",   -6.1200000000e+22, 9,
-__LINE__, "-612.e20",   -6.1200000000e+22, 8,
-__LINE__, "-612e+20",   -6.1200000000e+22, 8,
-__LINE__, "-612e20",   -6.1200000000e+22, 7,
-__LINE__, " -612.e-20",   -6.1200000000e-18, 10,
-__LINE__, " -612e-20",   -6.1200000000e-18, 9,
-__LINE__, "-612.e-20",   -6.1200000000e-18, 9,
-__LINE__, "-612e-20",   -6.1200000000e-18, 8,
-__LINE__, " -612.1",   -6.1210000000e+02, 7,
-__LINE__, "-612.1",   -6.1210000000e+02, 6,
-__LINE__, " -6121",   -6.1210000000e+03, 6,
-__LINE__, "-6121",   -6.1210000000e+03, 5,
-__LINE__, " -612.1241e-1",   -6.1212410000e+01, 13,
-__LINE__, "-612.1241e-1",   -6.1212410000e+01, 12,
-__LINE__, " -612.1241e+1",   -6.1212410000e+03, 13,
-__LINE__, " -612.1241e1",   -6.1212410000e+03, 12,
-__LINE__, "-612.1241e+1",   -6.1212410000e+03, 12,
-__LINE__, "-612.1241e1",   -6.1212410000e+03, 11,
-__LINE__, " -6121241e-1",   -6.1212410000e+05, 12,
-__LINE__, "-6121241e-1",   -6.1212410000e+05, 11,
-__LINE__, " -6121241e+1",   -6.1212410000e+07, 12,
-__LINE__, " -6121241e1",   -6.1212410000e+07, 11,
-__LINE__, "-6121241e+1",   -6.1212410000e+07, 11,
-__LINE__, "-6121241e1",   -6.1212410000e+07, 10,
-__LINE__, " -6121241e-20",   -6.1212410000e-14, 13,
-__LINE__, "-6121241e-20",   -6.1212410000e-14, 12,
-__LINE__, " -612.1241",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241+",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241+1",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241+20",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241-",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241-1",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241-20",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241e",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241e+",   -6.1212410000e+02, 10,
-__LINE__, " -612.1241e-",   -6.1212410000e+02, 10,
-__LINE__, "-612.1241",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241+",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241+1",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241+20",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241-",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241-1",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241-20",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241e",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241e+",   -6.1212410000e+02, 9,
-__LINE__, "-612.1241e-",   -6.1212410000e+02, 9,
-__LINE__, " -6121241",   -6.1212410000e+06, 9,
-__LINE__, " -6121241+",   -6.1212410000e+06, 9,
-__LINE__, " -6121241+1",   -6.1212410000e+06, 9,
-__LINE__, " -6121241+20",   -6.1212410000e+06, 9,
-__LINE__, " -6121241-",   -6.1212410000e+06, 9,
-__LINE__, " -6121241-1",   -6.1212410000e+06, 9,
-__LINE__, " -6121241-20",   -6.1212410000e+06, 9,
-__LINE__, " -6121241e",   -6.1212410000e+06, 9,
-__LINE__, " -6121241e+",   -6.1212410000e+06, 9,
-__LINE__, " -6121241e-",   -6.1212410000e+06, 9,
-__LINE__, "-6121241",   -6.1212410000e+06, 8,
-__LINE__, "-6121241+",   -6.1212410000e+06, 8,
-__LINE__, "-6121241+1",   -6.1212410000e+06, 8,
-__LINE__, "-6121241+20",   -6.1212410000e+06, 8,
-__LINE__, "-6121241-",   -6.1212410000e+06, 8,
-__LINE__, "-6121241-1",   -6.1212410000e+06, 8,
-__LINE__, "-6121241-20",   -6.1212410000e+06, 8,
-__LINE__, "-6121241e",   -6.1212410000e+06, 8,
-__LINE__, "-6121241e+",   -6.1212410000e+06, 8,
-__LINE__, "-6121241e-",   -6.1212410000e+06, 8,
-__LINE__, " -612.1241e+20",   -6.1212410000e+22, 14,
-__LINE__, " -612.1241e20",   -6.1212410000e+22, 13,
-__LINE__, "-612.1241e+20",   -6.1212410000e+22, 13,
-__LINE__, "-612.1241e20",   -6.1212410000e+22, 12,
-__LINE__, " -6121241e+20",   -6.1212410000e+26, 13,
-__LINE__, " -6121241e20",   -6.1212410000e+26, 12,
-__LINE__, "-6121241e+20",   -6.1212410000e+26, 12,
-__LINE__, "-6121241e20",   -6.1212410000e+26, 11,
-__LINE__, " -612.1241e-20",   -6.1212410000e-18, 14,
-__LINE__, "-612.1241e-20",   -6.1212410000e-18, 13,
-__LINE__, " -612.12411",   -6.1212411000e+02, 11,
-__LINE__, "-612.12411",   -6.1212411000e+02, 10,
-__LINE__, " -61212411",   -6.1212411000e+07, 10,
-__LINE__, "-61212411",   -6.1212411000e+07, 9,
-__LINE__, " -612.124120",   -6.1212412000e+02, 12,
-__LINE__, "-612.124120",   -6.1212412000e+02, 11,
-__LINE__, " -612124120",   -6.1212412000e+08, 11,
-__LINE__, "-612124120",   -6.1212412000e+08, 10,
-__LINE__, " -61220",   -6.1220000000e+04, 7,
-__LINE__, "-61220",   -6.1220000000e+04, 6,
-__LINE__, " -612.20",   -6.1220000000e+02, 8,
-__LINE__, "-612.20",   -6.1220000000e+02, 7,
-__LINE__, " -612.8",   -6.1280000000e+02, 7,
-__LINE__, " -612.8+",   -6.1280000000e+02, 7,
-__LINE__, " -612.8+1",   -6.1280000000e+02, 7,
-__LINE__, " -612.8+20",   -6.1280000000e+02, 7,
-__LINE__, " -612.8-",   -6.1280000000e+02, 7,
-__LINE__, " -612.8-1",   -6.1280000000e+02, 7,
-__LINE__, " -612.8-20",   -6.1280000000e+02, 7,
-__LINE__, " -612.8e",   -6.1280000000e+02, 7,
-__LINE__, " -612.8e+",   -6.1280000000e+02, 7,
-__LINE__, " -612.8e-",   -6.1280000000e+02, 7,
-__LINE__, " -6128e-1",   -6.1280000000e+02, 9,
-__LINE__, "-612.8",   -6.1280000000e+02, 6,
-__LINE__, "-612.8+",   -6.1280000000e+02, 6,
-__LINE__, "-612.8+1",   -6.1280000000e+02, 6,
-__LINE__, "-612.8+20",   -6.1280000000e+02, 6,
-__LINE__, "-612.8-",   -6.1280000000e+02, 6,
-__LINE__, "-612.8-1",   -6.1280000000e+02, 6,
-__LINE__, "-612.8-20",   -6.1280000000e+02, 6,
-__LINE__, "-612.8e",   -6.1280000000e+02, 6,
-__LINE__, "-612.8e+",   -6.1280000000e+02, 6,
-__LINE__, "-612.8e-",   -6.1280000000e+02, 6,
-__LINE__, "-6128e-1",   -6.1280000000e+02, 8,
-__LINE__, " -612.8e+20",   -6.1280000000e+22, 11,
-__LINE__, " -612.8e20",   -6.1280000000e+22, 10,
-__LINE__, "-612.8e+20",   -6.1280000000e+22, 10,
-__LINE__, "-612.8e20",   -6.1280000000e+22, 9,
-__LINE__, " -6128e-20",   -6.1280000000e-17, 10,
-__LINE__, "-6128e-20",   -6.1280000000e-17, 9,
-__LINE__, " -612.8e-1",   -6.1280000000e+01, 10,
-__LINE__, "-612.8e-1",   -6.1280000000e+01, 9,
-__LINE__, " -612.8e+1",   -6.1280000000e+03, 10,
-__LINE__, " -612.8e1",   -6.1280000000e+03, 9,
-__LINE__, " -6128",   -6.1280000000e+03, 6,
-__LINE__, " -6128+",   -6.1280000000e+03, 6,
-__LINE__, " -6128+1",   -6.1280000000e+03, 6,
-__LINE__, " -6128+20",   -6.1280000000e+03, 6,
-__LINE__, " -6128-",   -6.1280000000e+03, 6,
-__LINE__, " -6128-1",   -6.1280000000e+03, 6,
-__LINE__, " -6128-20",   -6.1280000000e+03, 6,
-__LINE__, " -6128e",   -6.1280000000e+03, 6,
-__LINE__, " -6128e+",   -6.1280000000e+03, 6,
-__LINE__, " -6128e-",   -6.1280000000e+03, 6,
-__LINE__, "-612.8e+1",   -6.1280000000e+03, 9,
-__LINE__, "-612.8e1",   -6.1280000000e+03, 8,
-__LINE__, "-6128",   -6.1280000000e+03, 5,
-__LINE__, "-6128+",   -6.1280000000e+03, 5,
-__LINE__, "-6128+1",   -6.1280000000e+03, 5,
-__LINE__, "-6128+20",   -6.1280000000e+03, 5,
-__LINE__, "-6128-",   -6.1280000000e+03, 5,
-__LINE__, "-6128-1",   -6.1280000000e+03, 5,
-__LINE__, "-6128-20",   -6.1280000000e+03, 5,
-__LINE__, "-6128e",   -6.1280000000e+03, 5,
-__LINE__, "-6128e+",   -6.1280000000e+03, 5,
-__LINE__, "-6128e-",   -6.1280000000e+03, 5,
-__LINE__, " -6128e+1",   -6.1280000000e+04, 9,
-__LINE__, " -6128e1",   -6.1280000000e+04, 8,
-__LINE__, "-6128e+1",   -6.1280000000e+04, 8,
-__LINE__, "-6128e1",   -6.1280000000e+04, 7,
-__LINE__, " -6128e+20",   -6.1280000000e+23, 10,
-__LINE__, " -6128e20",   -6.1280000000e+23, 9,
-__LINE__, "-6128e+20",   -6.1280000000e+23, 9,
-__LINE__, "-6128e20",   -6.1280000000e+23, 8,
-__LINE__, " -612.8e-20",   -6.1280000000e-18, 11,
-__LINE__, "-612.8e-20",   -6.1280000000e-18, 10,
-__LINE__, " -612.81",   -6.1281000000e+02, 8,
-__LINE__, "-612.81",   -6.1281000000e+02, 7,
-__LINE__, " -61281",   -6.1281000000e+04, 7,
-__LINE__, "-61281",   -6.1281000000e+04, 6,
-__LINE__, " -612820",   -6.1282000000e+05, 8,
-__LINE__, "-612820",   -6.1282000000e+05, 7,
-__LINE__, " -612.820",   -6.1282000000e+02, 9,
-__LINE__, "-612.820",   -6.1282000000e+02, 8,
-__LINE__, " -612.9e-1",   -6.1290000000e+01, 10,
-__LINE__, "-612.9e-1",   -6.1290000000e+01, 9,
-__LINE__, " -612.9",   -6.1290000000e+02, 7,
-__LINE__, " -612.9+",   -6.1290000000e+02, 7,
-__LINE__, " -612.9+1",   -6.1290000000e+02, 7,
-__LINE__, " -612.9+20",   -6.1290000000e+02, 7,
-__LINE__, " -612.9-",   -6.1290000000e+02, 7,
-__LINE__, " -612.9-1",   -6.1290000000e+02, 7,
-__LINE__, " -612.9-20",   -6.1290000000e+02, 7,
-__LINE__, " -612.9e",   -6.1290000000e+02, 7,
-__LINE__, " -612.9e+",   -6.1290000000e+02, 7,
-__LINE__, " -612.9e-",   -6.1290000000e+02, 7,
-__LINE__, " -6129e-1",   -6.1290000000e+02, 9,
-__LINE__, "-612.9",   -6.1290000000e+02, 6,
-__LINE__, "-612.9+",   -6.1290000000e+02, 6,
-__LINE__, "-612.9+1",   -6.1290000000e+02, 6,
-__LINE__, "-612.9+20",   -6.1290000000e+02, 6,
-__LINE__, "-612.9-",   -6.1290000000e+02, 6,
-__LINE__, "-612.9-1",   -6.1290000000e+02, 6,
-__LINE__, "-612.9-20",   -6.1290000000e+02, 6,
-__LINE__, "-612.9e",   -6.1290000000e+02, 6,
-__LINE__, "-612.9e+",   -6.1290000000e+02, 6,
-__LINE__, "-612.9e-",   -6.1290000000e+02, 6,
-__LINE__, "-6129e-1",   -6.1290000000e+02, 8,
-__LINE__, " -612.9e+1",   -6.1290000000e+03, 10,
-__LINE__, " -612.9e1",   -6.1290000000e+03, 9,
-__LINE__, " -6129",   -6.1290000000e+03, 6,
-__LINE__, " -6129+",   -6.1290000000e+03, 6,
-__LINE__, " -6129+1",   -6.1290000000e+03, 6,
-__LINE__, " -6129+20",   -6.1290000000e+03, 6,
-__LINE__, " -6129-",   -6.1290000000e+03, 6,
-__LINE__, " -6129-1",   -6.1290000000e+03, 6,
-__LINE__, " -6129-20",   -6.1290000000e+03, 6,
-__LINE__, " -6129e",   -6.1290000000e+03, 6,
-__LINE__, " -6129e+",   -6.1290000000e+03, 6,
-__LINE__, " -6129e-",   -6.1290000000e+03, 6,
-__LINE__, "-612.9e+1",   -6.1290000000e+03, 9,
-__LINE__, "-612.9e1",   -6.1290000000e+03, 8,
-__LINE__, "-6129",   -6.1290000000e+03, 5,
-__LINE__, "-6129+",   -6.1290000000e+03, 5,
-__LINE__, "-6129+1",   -6.1290000000e+03, 5,
-__LINE__, "-6129+20",   -6.1290000000e+03, 5,
-__LINE__, "-6129-",   -6.1290000000e+03, 5,
-__LINE__, "-6129-1",   -6.1290000000e+03, 5,
-__LINE__, "-6129-20",   -6.1290000000e+03, 5,
-__LINE__, "-6129e",   -6.1290000000e+03, 5,
-__LINE__, "-6129e+",   -6.1290000000e+03, 5,
-__LINE__, "-6129e-",   -6.1290000000e+03, 5,
-__LINE__, " -6129e+1",   -6.1290000000e+04, 9,
-__LINE__, " -6129e1",   -6.1290000000e+04, 8,
-__LINE__, "-6129e+1",   -6.1290000000e+04, 8,
-__LINE__, "-6129e1",   -6.1290000000e+04, 7,
-__LINE__, " -612.9e+20",   -6.1290000000e+22, 11,
-__LINE__, " -612.9e20",   -6.1290000000e+22, 10,
-__LINE__, "-612.9e+20",   -6.1290000000e+22, 10,
-__LINE__, "-612.9e20",   -6.1290000000e+22, 9,
-__LINE__, " -6129e+20",   -6.1290000000e+23, 10,
-__LINE__, " -6129e20",   -6.1290000000e+23, 9,
-__LINE__, "-6129e+20",   -6.1290000000e+23, 9,
-__LINE__, "-6129e20",   -6.1290000000e+23, 8,
-__LINE__, " -612.9e-20",   -6.1290000000e-18, 11,
-__LINE__, "-612.9e-20",   -6.1290000000e-18, 10,
-__LINE__, " -6129e-20",   -6.1290000000e-17, 10,
-__LINE__, "-6129e-20",   -6.1290000000e-17, 9,
-__LINE__, " -612.91",   -6.1291000000e+02, 8,
-__LINE__, "-612.91",   -6.1291000000e+02, 7,
-__LINE__, " -61291",   -6.1291000000e+04, 7,
-__LINE__, "-61291",   -6.1291000000e+04, 6,
-__LINE__, " -612.920",   -6.1292000000e+02, 9,
-__LINE__, "-612.920",   -6.1292000000e+02, 8,
-__LINE__, " -612920",   -6.1292000000e+05, 8,
-__LINE__, "-612920",   -6.1292000000e+05, 7,
-__LINE__, " -08e-20",   -8.0000000000e-20, 8,
-__LINE__, " -8e-20",   -8.0000000000e-20, 7,
-__LINE__, "-08e-20",   -8.0000000000e-20, 7,
-__LINE__, "-8e-20",   -8.0000000000e-20, 6,
-__LINE__, " -.8e-20",   -8.0000000000e-21, 8,
-__LINE__, " -0.8e-20",   -8.0000000000e-21, 9,
-__LINE__, "-.8e-20",   -8.0000000000e-21, 7,
-__LINE__, "-0.8e-20",   -8.0000000000e-21, 8,
-__LINE__, " -.8e+1",   -8.0000000000e+00, 7,
-__LINE__, " -.8e1",   -8.0000000000e+00, 6,
-__LINE__, " -0.8e+1",   -8.0000000000e+00, 8,
-__LINE__, " -0.8e1",   -8.0000000000e+00, 7,
-__LINE__, " -08",   -8.0000000000e+00, 4,
-__LINE__, " -08+",   -8.0000000000e+00, 4,
-__LINE__, " -08+1",   -8.0000000000e+00, 4,
-__LINE__, " -08+20",   -8.0000000000e+00, 4,
-__LINE__, " -08-",   -8.0000000000e+00, 4,
-__LINE__, " -08-1",   -8.0000000000e+00, 4,
-__LINE__, " -08-20",   -8.0000000000e+00, 4,
-__LINE__, " -08e",   -8.0000000000e+00, 4,
-__LINE__, " -08e+",   -8.0000000000e+00, 4,
-__LINE__, " -08e-",   -8.0000000000e+00, 4,
-__LINE__, " -8",   -8.0000000000e+00, 3,
-__LINE__, " -8+",   -8.0000000000e+00, 3,
-__LINE__, " -8+1",   -8.0000000000e+00, 3,
-__LINE__, " -8+20",   -8.0000000000e+00, 3,
-__LINE__, " -8-",   -8.0000000000e+00, 3,
-__LINE__, " -8-1",   -8.0000000000e+00, 3,
-__LINE__, " -8-20",   -8.0000000000e+00, 3,
-__LINE__, " -8e",   -8.0000000000e+00, 3,
-__LINE__, " -8e+",   -8.0000000000e+00, 3,
-__LINE__, " -8e-",   -8.0000000000e+00, 3,
-__LINE__, "-.8e+1",   -8.0000000000e+00, 6,
-__LINE__, "-.8e1",   -8.0000000000e+00, 5,
-__LINE__, "-0.8e+1",   -8.0000000000e+00, 7,
-__LINE__, "-0.8e1",   -8.0000000000e+00, 6,
-__LINE__, "-08",   -8.0000000000e+00, 3,
-__LINE__, "-08+",   -8.0000000000e+00, 3,
-__LINE__, "-08+1",   -8.0000000000e+00, 3,
-__LINE__, "-08+20",   -8.0000000000e+00, 3,
-__LINE__, "-08-",   -8.0000000000e+00, 3,
-__LINE__, "-08-1",   -8.0000000000e+00, 3,
-__LINE__, "-08-20",   -8.0000000000e+00, 3,
-__LINE__, "-08e",   -8.0000000000e+00, 3,
-__LINE__, "-08e+",   -8.0000000000e+00, 3,
-__LINE__, "-08e-",   -8.0000000000e+00, 3,
-__LINE__, "-8",   -8.0000000000e+00, 2,
-__LINE__, "-8+",   -8.0000000000e+00, 2,
-__LINE__, "-8+1",   -8.0000000000e+00, 2,
-__LINE__, "-8+20",   -8.0000000000e+00, 2,
-__LINE__, "-8-",   -8.0000000000e+00, 2,
-__LINE__, "-8-1",   -8.0000000000e+00, 2,
-__LINE__, "-8-20",   -8.0000000000e+00, 2,
-__LINE__, "-8e",   -8.0000000000e+00, 2,
-__LINE__, "-8e+",   -8.0000000000e+00, 2,
-__LINE__, "-8e-",   -8.0000000000e+00, 2,
-__LINE__, " -08e+1",   -8.0000000000e+01, 7,
-__LINE__, " -08e1",   -8.0000000000e+01, 6,
-__LINE__, " -8e+1",   -8.0000000000e+01, 6,
-__LINE__, " -8e1",   -8.0000000000e+01, 5,
-__LINE__, "-08e+1",   -8.0000000000e+01, 6,
-__LINE__, "-08e1",   -8.0000000000e+01, 5,
-__LINE__, "-8e+1",   -8.0000000000e+01, 5,
-__LINE__, "-8e1",   -8.0000000000e+01, 4,
-__LINE__, " -.8e+20",   -8.0000000000e+19, 8,
-__LINE__, " -.8e20",   -8.0000000000e+19, 7,
-__LINE__, " -0.8e+20",   -8.0000000000e+19, 9,
-__LINE__, " -0.8e20",   -8.0000000000e+19, 8,
-__LINE__, "-.8e+20",   -8.0000000000e+19, 7,
-__LINE__, "-.8e20",   -8.0000000000e+19, 6,
-__LINE__, "-0.8e+20",   -8.0000000000e+19, 8,
-__LINE__, "-0.8e20",   -8.0000000000e+19, 7,
-__LINE__, " -08e+20",   -8.0000000000e+20, 8,
-__LINE__, " -08e20",   -8.0000000000e+20, 7,
-__LINE__, " -8e+20",   -8.0000000000e+20, 7,
-__LINE__, " -8e20",   -8.0000000000e+20, 6,
-__LINE__, "-08e+20",   -8.0000000000e+20, 7,
-__LINE__, "-08e20",   -8.0000000000e+20, 6,
-__LINE__, "-8e+20",   -8.0000000000e+20, 6,
-__LINE__, "-8e20",   -8.0000000000e+20, 5,
-__LINE__, " -.8",   -8.0000000000e-01, 4,
-__LINE__, " -.8+",   -8.0000000000e-01, 4,
-__LINE__, " -.8+1",   -8.0000000000e-01, 4,
-__LINE__, " -.8+20",   -8.0000000000e-01, 4,
-__LINE__, " -.8-",   -8.0000000000e-01, 4,
-__LINE__, " -.8-1",   -8.0000000000e-01, 4,
-__LINE__, " -.8-20",   -8.0000000000e-01, 4,
-__LINE__, " -.8e",   -8.0000000000e-01, 4,
-__LINE__, " -.8e+",   -8.0000000000e-01, 4,
-__LINE__, " -.8e-",   -8.0000000000e-01, 4,
-__LINE__, " -0.8",   -8.0000000000e-01, 5,
-__LINE__, " -0.8+",   -8.0000000000e-01, 5,
-__LINE__, " -0.8+1",   -8.0000000000e-01, 5,
-__LINE__, " -0.8+20",   -8.0000000000e-01, 5,
-__LINE__, " -0.8-",   -8.0000000000e-01, 5,
-__LINE__, " -0.8-1",   -8.0000000000e-01, 5,
-__LINE__, " -0.8-20",   -8.0000000000e-01, 5,
-__LINE__, " -0.8e",   -8.0000000000e-01, 5,
-__LINE__, " -0.8e+",   -8.0000000000e-01, 5,
-__LINE__, " -0.8e-",   -8.0000000000e-01, 5,
-__LINE__, " -08e-1",   -8.0000000000e-01, 7,
-__LINE__, " -8e-1",   -8.0000000000e-01, 6,
-__LINE__, "-.8",   -8.0000000000e-01, 3,
-__LINE__, "-.8+",   -8.0000000000e-01, 3,
-__LINE__, "-.8+1",   -8.0000000000e-01, 3,
-__LINE__, "-.8+20",   -8.0000000000e-01, 3,
-__LINE__, "-.8-",   -8.0000000000e-01, 3,
-__LINE__, "-.8-1",   -8.0000000000e-01, 3,
-__LINE__, "-.8-20",   -8.0000000000e-01, 3,
-__LINE__, "-.8e",   -8.0000000000e-01, 3,
-__LINE__, "-.8e+",   -8.0000000000e-01, 3,
-__LINE__, "-.8e-",   -8.0000000000e-01, 3,
-__LINE__, "-0.8",   -8.0000000000e-01, 4,
-__LINE__, "-0.8+",   -8.0000000000e-01, 4,
-__LINE__, "-0.8+1",   -8.0000000000e-01, 4,
-__LINE__, "-0.8+20",   -8.0000000000e-01, 4,
-__LINE__, "-0.8-",   -8.0000000000e-01, 4,
-__LINE__, "-0.8-1",   -8.0000000000e-01, 4,
-__LINE__, "-0.8-20",   -8.0000000000e-01, 4,
-__LINE__, "-0.8e",   -8.0000000000e-01, 4,
-__LINE__, "-0.8e+",   -8.0000000000e-01, 4,
-__LINE__, "-0.8e-",   -8.0000000000e-01, 4,
-__LINE__, "-08e-1",   -8.0000000000e-01, 6,
-__LINE__, "-8e-1",   -8.0000000000e-01, 5,
-__LINE__, " -.8e-1",   -8.0000000000e-02, 7,
-__LINE__, " -0.8e-1",   -8.0000000000e-02, 8,
-__LINE__, "-.8e-1",   -8.0000000000e-02, 6,
-__LINE__, "-0.8e-1",   -8.0000000000e-02, 7,
-__LINE__, " -081",   -8.1000000000e+01, 5,
-__LINE__, " -81",   -8.1000000000e+01, 4,
-__LINE__, "-081",   -8.1000000000e+01, 4,
-__LINE__, "-81",   -8.1000000000e+01, 3,
-__LINE__, " -.81",   -8.1000000000e-01, 5,
-__LINE__, " -0.81",   -8.1000000000e-01, 6,
-__LINE__, "-.81",   -8.1000000000e-01, 4,
-__LINE__, "-0.81",   -8.1000000000e-01, 5,
-__LINE__, " -0820",   -8.2000000000e+02, 6,
-__LINE__, " -820",   -8.2000000000e+02, 5,
-__LINE__, "-0820",   -8.2000000000e+02, 5,
-__LINE__, "-820",   -8.2000000000e+02, 4,
-__LINE__, " -.820",   -8.2000000000e-01, 6,
-__LINE__, " -0.820",   -8.2000000000e-01, 7,
-__LINE__, "-.820",   -8.2000000000e-01, 5,
-__LINE__, "-0.820",   -8.2000000000e-01, 6,
-__LINE__, " -.9e+1",   -9.0000000000e+00, 7,
-__LINE__, " -.9e1",   -9.0000000000e+00, 6,
-__LINE__, " -0.9e+1",   -9.0000000000e+00, 8,
-__LINE__, " -0.9e1",   -9.0000000000e+00, 7,
-__LINE__, " -09",   -9.0000000000e+00, 4,
-__LINE__, " -09+",   -9.0000000000e+00, 4,
-__LINE__, " -09+1",   -9.0000000000e+00, 4,
-__LINE__, " -09+20",   -9.0000000000e+00, 4,
-__LINE__, " -09-",   -9.0000000000e+00, 4,
-__LINE__, " -09-1",   -9.0000000000e+00, 4,
-__LINE__, " -09-20",   -9.0000000000e+00, 4,
-__LINE__, " -09e",   -9.0000000000e+00, 4,
-__LINE__, " -09e+",   -9.0000000000e+00, 4,
-__LINE__, " -09e-",   -9.0000000000e+00, 4,
-__LINE__, " -9",   -9.0000000000e+00, 3,
-__LINE__, " -9+",   -9.0000000000e+00, 3,
-__LINE__, " -9+1",   -9.0000000000e+00, 3,
-__LINE__, " -9+20",   -9.0000000000e+00, 3,
-__LINE__, " -9-",   -9.0000000000e+00, 3,
-__LINE__, " -9-1",   -9.0000000000e+00, 3,
-__LINE__, " -9-20",   -9.0000000000e+00, 3,
-__LINE__, " -9e",   -9.0000000000e+00, 3,
-__LINE__, " -9e+",   -9.0000000000e+00, 3,
-__LINE__, " -9e-",   -9.0000000000e+00, 3,
-__LINE__, "-.9e+1",   -9.0000000000e+00, 6,
-__LINE__, "-.9e1",   -9.0000000000e+00, 5,
-__LINE__, "-0.9e+1",   -9.0000000000e+00, 7,
-__LINE__, "-0.9e1",   -9.0000000000e+00, 6,
-__LINE__, "-09",   -9.0000000000e+00, 3,
-__LINE__, "-09+",   -9.0000000000e+00, 3,
-__LINE__, "-09+1",   -9.0000000000e+00, 3,
-__LINE__, "-09+20",   -9.0000000000e+00, 3,
-__LINE__, "-09-",   -9.0000000000e+00, 3,
-__LINE__, "-09-1",   -9.0000000000e+00, 3,
-__LINE__, "-09-20",   -9.0000000000e+00, 3,
-__LINE__, "-09e",   -9.0000000000e+00, 3,
-__LINE__, "-09e+",   -9.0000000000e+00, 3,
-__LINE__, "-09e-",   -9.0000000000e+00, 3,
-__LINE__, "-9",   -9.0000000000e+00, 2,
-__LINE__, "-9+",   -9.0000000000e+00, 2,
-__LINE__, "-9+1",   -9.0000000000e+00, 2,
-__LINE__, "-9+20",   -9.0000000000e+00, 2,
-__LINE__, "-9-",   -9.0000000000e+00, 2,
-__LINE__, "-9-1",   -9.0000000000e+00, 2,
-__LINE__, "-9-20",   -9.0000000000e+00, 2,
-__LINE__, "-9e",   -9.0000000000e+00, 2,
-__LINE__, "-9e+",   -9.0000000000e+00, 2,
-__LINE__, "-9e-",   -9.0000000000e+00, 2,
-__LINE__, " -09e+1",   -9.0000000000e+01, 7,
-__LINE__, " -09e1",   -9.0000000000e+01, 6,
-__LINE__, " -9e+1",   -9.0000000000e+01, 6,
-__LINE__, " -9e1",   -9.0000000000e+01, 5,
-__LINE__, "-09e+1",   -9.0000000000e+01, 6,
-__LINE__, "-09e1",   -9.0000000000e+01, 5,
-__LINE__, "-9e+1",   -9.0000000000e+01, 5,
-__LINE__, "-9e1",   -9.0000000000e+01, 4,
-__LINE__, " -.9e+20",   -9.0000000000e+19, 8,
-__LINE__, " -.9e20",   -9.0000000000e+19, 7,
-__LINE__, " -0.9e+20",   -9.0000000000e+19, 9,
-__LINE__, " -0.9e20",   -9.0000000000e+19, 8,
-__LINE__, "-.9e+20",   -9.0000000000e+19, 7,
-__LINE__, "-.9e20",   -9.0000000000e+19, 6,
-__LINE__, "-0.9e+20",   -9.0000000000e+19, 8,
-__LINE__, "-0.9e20",   -9.0000000000e+19, 7,
-__LINE__, " -09e+20",   -9.0000000000e+20, 8,
-__LINE__, " -09e20",   -9.0000000000e+20, 7,
-__LINE__, " -9e+20",   -9.0000000000e+20, 7,
-__LINE__, " -9e20",   -9.0000000000e+20, 6,
-__LINE__, "-09e+20",   -9.0000000000e+20, 7,
-__LINE__, "-09e20",   -9.0000000000e+20, 6,
-__LINE__, "-9e+20",   -9.0000000000e+20, 6,
-__LINE__, "-9e20",   -9.0000000000e+20, 5,
-__LINE__, " -.9",   -9.0000000000e-01, 4,
-__LINE__, " -.9+",   -9.0000000000e-01, 4,
-__LINE__, " -.9+1",   -9.0000000000e-01, 4,
-__LINE__, " -.9+20",   -9.0000000000e-01, 4,
-__LINE__, " -.9-",   -9.0000000000e-01, 4,
-__LINE__, " -.9-1",   -9.0000000000e-01, 4,
-__LINE__, " -.9-20",   -9.0000000000e-01, 4,
-__LINE__, " -.9e",   -9.0000000000e-01, 4,
-__LINE__, " -.9e+",   -9.0000000000e-01, 4,
-__LINE__, " -.9e-",   -9.0000000000e-01, 4,
-__LINE__, " -0.9",   -9.0000000000e-01, 5,
-__LINE__, " -0.9+",   -9.0000000000e-01, 5,
-__LINE__, " -0.9+1",   -9.0000000000e-01, 5,
-__LINE__, " -0.9+20",   -9.0000000000e-01, 5,
-__LINE__, " -0.9-",   -9.0000000000e-01, 5,
-__LINE__, " -0.9-1",   -9.0000000000e-01, 5,
-__LINE__, " -0.9-20",   -9.0000000000e-01, 5,
-__LINE__, " -0.9e",   -9.0000000000e-01, 5,
-__LINE__, " -0.9e+",   -9.0000000000e-01, 5,
-__LINE__, " -0.9e-",   -9.0000000000e-01, 5,
-__LINE__, " -09e-1",   -9.0000000000e-01, 7,
-__LINE__, " -9e-1",   -9.0000000000e-01, 6,
-__LINE__, "-.9",   -9.0000000000e-01, 3,
-__LINE__, "-.9+",   -9.0000000000e-01, 3,
-__LINE__, "-.9+1",   -9.0000000000e-01, 3,
-__LINE__, "-.9+20",   -9.0000000000e-01, 3,
-__LINE__, "-.9-",   -9.0000000000e-01, 3,
-__LINE__, "-.9-1",   -9.0000000000e-01, 3,
-__LINE__, "-.9-20",   -9.0000000000e-01, 3,
-__LINE__, "-.9e",   -9.0000000000e-01, 3,
-__LINE__, "-.9e+",   -9.0000000000e-01, 3,
-__LINE__, "-.9e-",   -9.0000000000e-01, 3,
-__LINE__, "-0.9",   -9.0000000000e-01, 4,
-__LINE__, "-0.9+",   -9.0000000000e-01, 4,
-__LINE__, "-0.9+1",   -9.0000000000e-01, 4,
-__LINE__, "-0.9+20",   -9.0000000000e-01, 4,
-__LINE__, "-0.9-",   -9.0000000000e-01, 4,
-__LINE__, "-0.9-1",   -9.0000000000e-01, 4,
-__LINE__, "-0.9-20",   -9.0000000000e-01, 4,
-__LINE__, "-0.9e",   -9.0000000000e-01, 4,
-__LINE__, "-0.9e+",   -9.0000000000e-01, 4,
-__LINE__, "-0.9e-",   -9.0000000000e-01, 4,
-__LINE__, "-09e-1",   -9.0000000000e-01, 6,
-__LINE__, "-9e-1",   -9.0000000000e-01, 5,
-__LINE__, " -.9e-1",   -9.0000000000e-02, 7,
-__LINE__, " -0.9e-1",   -9.0000000000e-02, 8,
-__LINE__, "-.9e-1",   -9.0000000000e-02, 6,
-__LINE__, "-0.9e-1",   -9.0000000000e-02, 7,
-__LINE__, " -09e-20",   -9.0000000000e-20, 8,
-__LINE__, " -9e-20",   -9.0000000000e-20, 7,
-__LINE__, "-09e-20",   -9.0000000000e-20, 7,
-__LINE__, "-9e-20",   -9.0000000000e-20, 6,
-__LINE__, " -.9e-20",   -9.0000000000e-21, 8,
-__LINE__, " -0.9e-20",   -9.0000000000e-21, 9,
-__LINE__, "-.9e-20",   -9.0000000000e-21, 7,
-__LINE__, "-0.9e-20",   -9.0000000000e-21, 8,
-__LINE__, " -091",   -9.1000000000e+01, 5,
-__LINE__, " -91",   -9.1000000000e+01, 4,
-__LINE__, "-091",   -9.1000000000e+01, 4,
-__LINE__, "-91",   -9.1000000000e+01, 3,
-__LINE__, " -.91",   -9.1000000000e-01, 5,
-__LINE__, " -0.91",   -9.1000000000e-01, 6,
-__LINE__, "-.91",   -9.1000000000e-01, 4,
-__LINE__, "-0.91",   -9.1000000000e-01, 5,
-__LINE__, " -0920",   -9.2000000000e+02, 6,
-__LINE__, " -920",   -9.2000000000e+02, 5,
-__LINE__, "-0920",   -9.2000000000e+02, 5,
-__LINE__, "-920",   -9.2000000000e+02, 4,
-__LINE__, " -.920",   -9.2000000000e-01, 6,
-__LINE__, " -0.920",   -9.2000000000e-01, 7,
-__LINE__, "-.920",   -9.2000000000e-01, 5,
-__LINE__, "-0.920",   -9.2000000000e-01, 6,
-__LINE__, " ",    0.0000000000e+00, 0,
-__LINE__, " +",    0.0000000000e+00, 0,
-__LINE__, " ++",    0.0000000000e+00, 0,
-__LINE__, " ++1",    0.0000000000e+00, 0,
-__LINE__, " ++20",    0.0000000000e+00, 0,
-__LINE__, " +-",    0.0000000000e+00, 0,
-__LINE__, " +-1",    0.0000000000e+00, 0,
-__LINE__, " +-20",    0.0000000000e+00, 0,
-__LINE__, " +.",    0.0000000000e+00,0,
-__LINE__, " +.+",    0.0000000000e+00,0,
-__LINE__, " +.+1",    0.0000000000e+00,0,
-__LINE__, " +.+20",    0.0000000000e+00,0,
-__LINE__, " +.-",    0.0000000000e+00,0,
-__LINE__, " +.-1",    0.0000000000e+00,0,
-__LINE__, " +.-20",    0.0000000000e+00,0,
-__LINE__, " +.e",    0.0000000000e+00,0,
-__LINE__, " +.e+",    0.0000000000e+00,0,
-__LINE__, " +.e+1",    0.0000000000e+00,0,
-__LINE__, " +.e+20",    0.0000000000e+00,0,
-__LINE__, " +.e-",    0.0000000000e+00,0,
-__LINE__, " +.e-1",    0.0000000000e+00,0,
-__LINE__, " +.e-20",    0.0000000000e+00,0,
-__LINE__, " +.e1",    0.0000000000e+00,0,
-__LINE__, " +.e20",    0.0000000000e+00,0,
-__LINE__, " +0",    0.0000000000e+00, 3,
-__LINE__, " +0+",    0.0000000000e+00, 3,
-__LINE__, " +0+1",    0.0000000000e+00, 3,
-__LINE__, " +0+20",    0.0000000000e+00, 3,
-__LINE__, " +0-",    0.0000000000e+00, 3,
-__LINE__, " +0-1",    0.0000000000e+00, 3,
-__LINE__, " +0-20",    0.0000000000e+00, 3,
-__LINE__, " +0.",    0.0000000000e+00, 4,
-__LINE__, " +0.+",    0.0000000000e+00, 4,
-__LINE__, " +0.+1",    0.0000000000e+00, 4,
-__LINE__, " +0.+20",    0.0000000000e+00, 4,
-__LINE__, " +0.-",    0.0000000000e+00, 4,
-__LINE__, " +0.-1",    0.0000000000e+00, 4,
-__LINE__, " +0.-20",    0.0000000000e+00, 4,
-__LINE__, " +0.e",    0.0000000000e+00, 4,
-__LINE__, " +0.e+",    0.0000000000e+00, 4,
-__LINE__, " +0.e+1",    0.0000000000e+00, 7,
-__LINE__, " +0.e+20",    0.0000000000e+00, 8,
-__LINE__, " +0.e-",    0.0000000000e+00, 4,
-__LINE__, " +0.e-1",    0.0000000000e+00, 7,
-__LINE__, " +0.e-20",    0.0000000000e+00, 8,
-__LINE__, " +0.e1",    0.0000000000e+00, 6,
-__LINE__, " +0.e20",    0.0000000000e+00, 7,
-__LINE__, " +0e",    0.0000000000e+00, 3,
-__LINE__, " +0e+",    0.0000000000e+00, 3,
-__LINE__, " +0e+1",    0.0000000000e+00, 6,
-__LINE__, " +0e+20",    0.0000000000e+00, 7,
-__LINE__, " +0e-",    0.0000000000e+00, 3,
-__LINE__, " +0e-1",    0.0000000000e+00, 6,
-__LINE__, " +0e-20",    0.0000000000e+00, 7,
-__LINE__, " +0e1",    0.0000000000e+00, 5,
-__LINE__, " +0e20",    0.0000000000e+00, 6,
-__LINE__, " +e",    0.0000000000e+00, 0,
-__LINE__, " +e+",    0.0000000000e+00, 0,
-__LINE__, " +e+1",    0.0000000000e+00, 0,
-__LINE__, " +e+20",    0.0000000000e+00, 0,
-__LINE__, " +e-",    0.0000000000e+00, 0,
-__LINE__, " +e-1",    0.0000000000e+00, 0,
-__LINE__, " +e-20",    0.0000000000e+00, 0,
-__LINE__, " +e1",    0.0000000000e+00, 0,
-__LINE__, " +e20",    0.0000000000e+00, 0,
-__LINE__, " -",    0.0000000000e+00, 0,
-__LINE__, " -+",    0.0000000000e+00, 0,
-__LINE__, " -+1",    0.0000000000e+00, 0,
-__LINE__, " -+20",    0.0000000000e+00, 0,
-__LINE__, " --",    0.0000000000e+00, 0,
-__LINE__, " --1",    0.0000000000e+00, 0,
-__LINE__, " --20",    0.0000000000e+00, 0,
-__LINE__, " -.",    0.0000000000e+00,0,
-__LINE__, " -.+",    0.0000000000e+00,0,
-__LINE__, " -.+1",    0.0000000000e+00,0,
-__LINE__, " -.+20",    0.0000000000e+00,0,
-__LINE__, " -.-",    0.0000000000e+00,0,
-__LINE__, " -.-1",    0.0000000000e+00,0,
-__LINE__, " -.-20",    0.0000000000e+00,0,
-__LINE__, " -.e",    0.0000000000e+00,0,
-__LINE__, " -.e+",    0.0000000000e+00,0,
-__LINE__, " -.e+1",    0.0000000000e+00,0,
-__LINE__, " -.e+20",    0.0000000000e+00,0,
-__LINE__, " -.e-",    0.0000000000e+00,0,
-__LINE__, " -.e-1",    0.0000000000e+00,0,
-__LINE__, " -.e-20",    0.0000000000e+00,0,
-__LINE__, " -.e1",    0.0000000000e+00,0,
-__LINE__, " -.e20",    0.0000000000e+00,0,
-__LINE__, " -0",    0.0000000000e+00, 3,
-__LINE__, " -0+",    0.0000000000e+00, 3,
-__LINE__, " -0+1",    0.0000000000e+00, 3,
-__LINE__, " -0+20",    0.0000000000e+00, 3,
-__LINE__, " -0-",    0.0000000000e+00, 3,
-__LINE__, " -0-1",    0.0000000000e+00, 3,
-__LINE__, " -0-20",    0.0000000000e+00, 3,
-__LINE__, " -0.",    0.0000000000e+00, 4,
-__LINE__, " -0.+",    0.0000000000e+00, 4,
-__LINE__, " -0.+1",    0.0000000000e+00, 4,
-__LINE__, " -0.+20",    0.0000000000e+00, 4,
-__LINE__, " -0.-",    0.0000000000e+00, 4,
-__LINE__, " -0.-1",    0.0000000000e+00, 4,
-__LINE__, " -0.-20",    0.0000000000e+00, 4,
-__LINE__, " -0.e",    0.0000000000e+00, 4,
-__LINE__, " -0.e+",    0.0000000000e+00, 4,
-__LINE__, " -0.e+1",    0.0000000000e+00, 7,
-__LINE__, " -0.e+20",    0.0000000000e+00, 8,
-__LINE__, " -0.e-",    0.0000000000e+00, 4,
-__LINE__, " -0.e-1",    0.0000000000e+00, 7,
-__LINE__, " -0.e-20",    0.0000000000e+00, 8,
-__LINE__, " -0.e1",    0.0000000000e+00, 6,
-__LINE__, " -0.e20",    0.0000000000e+00, 7,
-__LINE__, " -0e",    0.0000000000e+00, 3,
-__LINE__, " -0e+",    0.0000000000e+00, 3,
-__LINE__, " -0e+1",    0.0000000000e+00, 6,
-__LINE__, " -0e+20",    0.0000000000e+00, 7,
-__LINE__, " -0e-",    0.0000000000e+00, 3,
-__LINE__, " -0e-1",    0.0000000000e+00, 6,
-__LINE__, " -0e-20",    0.0000000000e+00, 7,
-__LINE__, " -0e1",    0.0000000000e+00, 5,
-__LINE__, " -0e20",    0.0000000000e+00, 6,
-__LINE__, " -e",    0.0000000000e+00, 0,
-__LINE__, " -e+",    0.0000000000e+00, 0,
-__LINE__, " -e+1",    0.0000000000e+00, 0,
-__LINE__, " -e+20",    0.0000000000e+00, 0,
-__LINE__, " -e-",    0.0000000000e+00, 0,
-__LINE__, " -e-1",    0.0000000000e+00, 0,
-__LINE__, " -e-20",    0.0000000000e+00, 0,
-__LINE__, " -e1",    0.0000000000e+00, 0,
-__LINE__, " -e20",    0.0000000000e+00, 0,
-__LINE__, " .",    0.0000000000e+00,0,
-__LINE__, " .+",    0.0000000000e+00,0,
-__LINE__, " .+1",    0.0000000000e+00,0,
-__LINE__, " .+20",    0.0000000000e+00,0,
-__LINE__, " .-",    0.0000000000e+00,0,
-__LINE__, " .-1",    0.0000000000e+00,0,
-__LINE__, " .-20",    0.0000000000e+00,0,
-__LINE__, " .e",    0.0000000000e+00,0,
-__LINE__, " .e+",    0.0000000000e+00,0,
-__LINE__, " .e+1",    0.0000000000e+00,0,
-__LINE__, " .e+20",    0.0000000000e+00,0,
-__LINE__, " .e-",    0.0000000000e+00,0,
-__LINE__, " .e-1",    0.0000000000e+00,0,
-__LINE__, " .e-20",    0.0000000000e+00,0,
-__LINE__, " .e1",    0.0000000000e+00,0,
-__LINE__, " .e20",    0.0000000000e+00,0,
-__LINE__, " 0",    0.0000000000e+00, 2,
-__LINE__, " 0+",    0.0000000000e+00, 2,
-__LINE__, " 0+1",    0.0000000000e+00, 2,
-__LINE__, " 0+20",    0.0000000000e+00, 2,
-__LINE__, " 0-",    0.0000000000e+00, 2,
-__LINE__, " 0-1",    0.0000000000e+00, 2,
-__LINE__, " 0-20",    0.0000000000e+00, 2,
-__LINE__, " 0.",    0.0000000000e+00, 3,
-__LINE__, " 0.+",    0.0000000000e+00, 3,
-__LINE__, " 0.+1",    0.0000000000e+00, 3,
-__LINE__, " 0.+20",    0.0000000000e+00, 3,
-__LINE__, " 0.-",    0.0000000000e+00, 3,
-__LINE__, " 0.-1",    0.0000000000e+00, 3,
-__LINE__, " 0.-20",    0.0000000000e+00, 3,
-__LINE__, " 0.e",    0.0000000000e+00, 3,
-__LINE__, " 0.e+",    0.0000000000e+00, 3,
-__LINE__, " 0.e+1",    0.0000000000e+00, 6,
-__LINE__, " 0.e+20",    0.0000000000e+00, 7,
-__LINE__, " 0.e-",    0.0000000000e+00, 3,
-__LINE__, " 0.e-1",    0.0000000000e+00, 6,
-__LINE__, " 0.e-20",    0.0000000000e+00, 7,
-__LINE__, " 0.e1",    0.0000000000e+00, 5,
-__LINE__, " 0.e20",    0.0000000000e+00, 6,
-__LINE__, " 0e",    0.0000000000e+00, 2,
-__LINE__, " 0e+",    0.0000000000e+00, 2,
-__LINE__, " 0e+1",    0.0000000000e+00, 5,
-__LINE__, " 0e+20",    0.0000000000e+00, 6,
-__LINE__, " 0e-",    0.0000000000e+00, 2,
-__LINE__, " 0e-1",    0.0000000000e+00, 5,
-__LINE__, " 0e-20",    0.0000000000e+00, 6,
-__LINE__, " 0e1",    0.0000000000e+00, 4,
-__LINE__, " 0e20",    0.0000000000e+00, 5,
-__LINE__, " e",    0.0000000000e+00, 0,
-__LINE__, " e+",    0.0000000000e+00, 0,
-__LINE__, " e+1",    0.0000000000e+00, 0,
-__LINE__, " e+20",    0.0000000000e+00, 0,
-__LINE__, " e-",    0.0000000000e+00, 0,
-__LINE__, " e-1",    0.0000000000e+00, 0,
-__LINE__, " e-20",    0.0000000000e+00, 0,
-__LINE__, " e1",    0.0000000000e+00, 0,
-__LINE__, " e20",    0.0000000000e+00, 0,
-__LINE__, "",    0.0000000000e+00, 0,
-__LINE__, "+",    0.0000000000e+00, 0,
-__LINE__, "++",    0.0000000000e+00, 0,
-__LINE__, "++1",    0.0000000000e+00, 0,
-__LINE__, "++20",    0.0000000000e+00, 0,
-__LINE__, "+-",    0.0000000000e+00, 0,
-__LINE__, "+-1",    0.0000000000e+00, 0,
-__LINE__, "+-20",    0.0000000000e+00, 0,
-__LINE__, "+.",    0.0000000000e+00,0,
-__LINE__, "+.+",    0.0000000000e+00,0,
-__LINE__, "+.+1",    0.0000000000e+00,0,
-__LINE__, "+.+20",    0.0000000000e+00,0,
-__LINE__, "+.-",    0.0000000000e+00,0,
-__LINE__, "+.-1",    0.0000000000e+00,0,
-__LINE__, "+.-20",    0.0000000000e+00,0,
-__LINE__, "+.e",    0.0000000000e+00,0,
-__LINE__, "+.e+",    0.0000000000e+00,0,
-__LINE__, "+.e+1",    0.0000000000e+00,0,
-__LINE__, "+.e+20",    0.0000000000e+00,0,
-__LINE__, "+.e-",    0.0000000000e+00,0,
-__LINE__, "+.e-1",    0.0000000000e+00,0,
-__LINE__, "+.e-20",    0.0000000000e+00,0,
-__LINE__, "+.e1",    0.0000000000e+00,0,
-__LINE__, "+.e20",    0.0000000000e+00,0,
-__LINE__, "+0",    0.0000000000e+00, 2,
-__LINE__, "+0+",    0.0000000000e+00, 2,
-__LINE__, "+0+1",    0.0000000000e+00, 2,
-__LINE__, "+0+20",    0.0000000000e+00, 2,
-__LINE__, "+0-",    0.0000000000e+00, 2,
-__LINE__, "+0-1",    0.0000000000e+00, 2,
-__LINE__, "+0-20",    0.0000000000e+00, 2,
-__LINE__, "+0.",    0.0000000000e+00, 3,
-__LINE__, "+0.+",    0.0000000000e+00, 3,
-__LINE__, "+0.+1",    0.0000000000e+00, 3,
-__LINE__, "+0.+20",    0.0000000000e+00, 3,
-__LINE__, "+0.-",    0.0000000000e+00, 3,
-__LINE__, "+0.-1",    0.0000000000e+00, 3,
-__LINE__, "+0.-20",    0.0000000000e+00, 3,
-__LINE__, "+0.e",    0.0000000000e+00, 3,
-__LINE__, "+0.e+",    0.0000000000e+00, 3,
-__LINE__, "+0.e+1",    0.0000000000e+00, 6,
-__LINE__, "+0.e+20",    0.0000000000e+00, 7,
-__LINE__, "+0.e-",    0.0000000000e+00, 3,
-__LINE__, "+0.e-1",    0.0000000000e+00, 6,
-__LINE__, "+0.e-20",    0.0000000000e+00, 7,
-__LINE__, "+0.e1",    0.0000000000e+00, 5,
-__LINE__, "+0.e20",    0.0000000000e+00, 6,
-__LINE__, "+0e",    0.0000000000e+00, 2,
-__LINE__, "+0e+",    0.0000000000e+00, 2,
-__LINE__, "+0e+1",    0.0000000000e+00, 5,
-__LINE__, "+0e+20",    0.0000000000e+00, 6,
-__LINE__, "+0e-",    0.0000000000e+00, 2,
-__LINE__, "+0e-1",    0.0000000000e+00, 5,
-__LINE__, "+0e-20",    0.0000000000e+00, 6,
-__LINE__, "+0e1",    0.0000000000e+00, 4,
-__LINE__, "+0e20",    0.0000000000e+00, 5,
-__LINE__, "+e",    0.0000000000e+00, 0,
-__LINE__, "+e+",    0.0000000000e+00, 0,
-__LINE__, "+e+1",    0.0000000000e+00, 0,
-__LINE__, "+e+20",    0.0000000000e+00, 0,
-__LINE__, "+e-",    0.0000000000e+00, 0,
-__LINE__, "+e-1",    0.0000000000e+00, 0,
-__LINE__, "+e-20",    0.0000000000e+00, 0,
-__LINE__, "+e1",    0.0000000000e+00, 0,
-__LINE__, "+e20",    0.0000000000e+00, 0,
-__LINE__, "-",    0.0000000000e+00, 0,
-__LINE__, "-+",    0.0000000000e+00, 0,
-__LINE__, "-+1",    0.0000000000e+00, 0,
-__LINE__, "-+20",    0.0000000000e+00, 0,
-__LINE__, "--",    0.0000000000e+00, 0,
-__LINE__, "--1",    0.0000000000e+00, 0,
-__LINE__, "--20",    0.0000000000e+00, 0,
-__LINE__, "-.",    0.0000000000e+00,0,
-__LINE__, "-.+",    0.0000000000e+00,0,
-__LINE__, "-.+1",    0.0000000000e+00,0,
-__LINE__, "-.+20",    0.0000000000e+00,0,
-__LINE__, "-.-",    0.0000000000e+00,0,
-__LINE__, "-.-1",    0.0000000000e+00,0,
-__LINE__, "-.-20",    0.0000000000e+00,0,
-__LINE__, "-.e",    0.0000000000e+00,0,
-__LINE__, "-.e+",    0.0000000000e+00,0,
-__LINE__, "-.e+1",    0.0000000000e+00,0,
-__LINE__, "-.e+20",    0.0000000000e+00,0,
-__LINE__, "-.e-",    0.0000000000e+00,0,
-__LINE__, "-.e-1",    0.0000000000e+00,0,
-__LINE__, "-.e-20",    0.0000000000e+00,0,
-__LINE__, "-.e1",    0.0000000000e+00,0,
-__LINE__, "-.e20",    0.0000000000e+00,0,
-__LINE__, "-0",    0.0000000000e+00, 2,
-__LINE__, "-0+",    0.0000000000e+00, 2,
-__LINE__, "-0+1",    0.0000000000e+00, 2,
-__LINE__, "-0+20",    0.0000000000e+00, 2,
-__LINE__, "-0-",    0.0000000000e+00, 2,
-__LINE__, "-0-1",    0.0000000000e+00, 2,
-__LINE__, "-0-20",    0.0000000000e+00, 2,
-__LINE__, "-0.",    0.0000000000e+00, 3,
-__LINE__, "-0.+",    0.0000000000e+00, 3,
-__LINE__, "-0.+1",    0.0000000000e+00, 3,
-__LINE__, "-0.+20",    0.0000000000e+00, 3,
-__LINE__, "-0.-",    0.0000000000e+00, 3,
-__LINE__, "-0.-1",    0.0000000000e+00, 3,
-__LINE__, "-0.-20",    0.0000000000e+00, 3,
-__LINE__, "-0.e",    0.0000000000e+00, 3,
-__LINE__, "-0.e+",    0.0000000000e+00, 3,
-__LINE__, "-0.e+1",    0.0000000000e+00, 6,
-__LINE__, "-0.e+20",    0.0000000000e+00, 7,
-__LINE__, "-0.e-",    0.0000000000e+00, 3,
-__LINE__, "-0.e-1",    0.0000000000e+00, 6,
-__LINE__, "-0.e-20",    0.0000000000e+00, 7,
-__LINE__, "-0.e1",    0.0000000000e+00, 5,
-__LINE__, "-0.e20",    0.0000000000e+00, 6,
-__LINE__, "-0e",    0.0000000000e+00, 2,
-__LINE__, "-0e+",    0.0000000000e+00, 2,
-__LINE__, "-0e+1",    0.0000000000e+00, 5,
-__LINE__, "-0e+20",    0.0000000000e+00, 6,
-__LINE__, "-0e-",    0.0000000000e+00, 2,
-__LINE__, "-0e-1",    0.0000000000e+00, 5,
-__LINE__, "-0e-20",    0.0000000000e+00, 6,
-__LINE__, "-0e1",    0.0000000000e+00, 4,
-__LINE__, "-0e20",    0.0000000000e+00, 5,
-__LINE__, "-e",    0.0000000000e+00, 0,
-__LINE__, "-e+",    0.0000000000e+00, 0,
-__LINE__, "-e+1",    0.0000000000e+00, 0,
-__LINE__, "-e+20",    0.0000000000e+00, 0,
-__LINE__, "-e-",    0.0000000000e+00, 0,
-__LINE__, "-e-1",    0.0000000000e+00, 0,
-__LINE__, "-e-20",    0.0000000000e+00, 0,
-__LINE__, "-e1",    0.0000000000e+00, 0,
-__LINE__, "-e20",    0.0000000000e+00, 0,
-__LINE__, ".",    0.0000000000e+00,0,
-__LINE__, ".+",    0.0000000000e+00,0,
-__LINE__, ".+1",    0.0000000000e+00,0,
-__LINE__, ".+20",    0.0000000000e+00,0,
-__LINE__, ".-",    0.0000000000e+00,0,
-__LINE__, ".-1",    0.0000000000e+00,0,
-__LINE__, ".-20",    0.0000000000e+00,0,
-__LINE__, ".e",    0.0000000000e+00,0,
-__LINE__, ".e+",    0.0000000000e+00,0,
-__LINE__, ".e+1",    0.0000000000e+00,0,
-__LINE__, ".e+20",    0.0000000000e+00,0,
-__LINE__, ".e-",    0.0000000000e+00,0,
-__LINE__, ".e-1",    0.0000000000e+00,0,
-__LINE__, ".e-20",    0.0000000000e+00,0,
-__LINE__, ".e1",    0.0000000000e+00,0,
-__LINE__, ".e20",    0.0000000000e+00,0,
-__LINE__, "0",    0.0000000000e+00, 1,
-__LINE__, "0+",    0.0000000000e+00, 1,
-__LINE__, "0+1",    0.0000000000e+00, 1,
-__LINE__, "0+20",    0.0000000000e+00, 1,
-__LINE__, "0-",    0.0000000000e+00, 1,
-__LINE__, "0-1",    0.0000000000e+00, 1,
-__LINE__, "0-20",    0.0000000000e+00, 1,
-__LINE__, "0.",    0.0000000000e+00, 2,
-__LINE__, "0.+",    0.0000000000e+00, 2,
-__LINE__, "0.+1",    0.0000000000e+00, 2,
-__LINE__, "0.+20",    0.0000000000e+00, 2,
-__LINE__, "0.-",    0.0000000000e+00, 2,
-__LINE__, "0.-1",    0.0000000000e+00, 2,
-__LINE__, "0.-20",    0.0000000000e+00, 2,
-__LINE__, "0.e",    0.0000000000e+00, 2,
-__LINE__, "0.e+",    0.0000000000e+00, 2,
-__LINE__, "0.e+1",    0.0000000000e+00, 5,
-__LINE__, "0.e+20",    0.0000000000e+00, 6,
-__LINE__, "0.e-",    0.0000000000e+00, 2,
-__LINE__, "0.e-1",    0.0000000000e+00, 5,
-__LINE__, "0.e-20",    0.0000000000e+00, 6,
-__LINE__, "0.e1",    0.0000000000e+00, 4,
-__LINE__, "0.e20",    0.0000000000e+00, 5,
-__LINE__, "0e",    0.0000000000e+00, 1,
-__LINE__, "0e+",    0.0000000000e+00, 1,
-__LINE__, "0e+1",    0.0000000000e+00, 4,
-__LINE__, "0e+20",    0.0000000000e+00, 5,
-__LINE__, "0e-",    0.0000000000e+00, 1,
-__LINE__, "0e-1",    0.0000000000e+00, 4,
-__LINE__, "0e-20",    0.0000000000e+00, 5,
-__LINE__, "0e1",    0.0000000000e+00, 3,
-__LINE__, "0e20",    0.0000000000e+00, 4,
-__LINE__, "e",    0.0000000000e+00, 0,
-__LINE__, "e+",    0.0000000000e+00, 0,
-__LINE__, "e+1",    0.0000000000e+00, 0,
-__LINE__, "e+20",    0.0000000000e+00, 0,
-__LINE__, "e-",    0.0000000000e+00, 0,
-__LINE__, "e-1",    0.0000000000e+00, 0,
-__LINE__, "e-20",    0.0000000000e+00, 0,
-__LINE__, "e1",    0.0000000000e+00, 0,
-__LINE__, "e20",    0.0000000000e+00, 0,
-__LINE__, " +01",    1.0000000000e+00, 4,
-__LINE__, " +1",    1.0000000000e+00, 3,
-__LINE__, " 01",    1.0000000000e+00, 3,
-__LINE__, " 1",    1.0000000000e+00, 2,
-__LINE__, "+01",    1.0000000000e+00, 3,
-__LINE__, "+1",    1.0000000000e+00, 2,
-__LINE__, "01",    1.0000000000e+00, 2,
-__LINE__, "1",    1.0000000000e+00, 1,
-__LINE__, " +.1",    1.0000000000e-01, 4,
-__LINE__, " +0.1",    1.0000000000e-01, 5,
-__LINE__, " .1",    1.0000000000e-01, 3,
-__LINE__, " 0.1",    1.0000000000e-01, 4,
-__LINE__, "+.1",    1.0000000000e-01, 3,
-__LINE__, "+0.1",    1.0000000000e-01, 4,
-__LINE__, ".1",    1.0000000000e-01, 2,
-__LINE__, "0.1",    1.0000000000e-01, 3,
-__LINE__, " +01241e-1",    1.2410000000e+02, 10,
-__LINE__, " +1241e-1",    1.2410000000e+02, 9,
-__LINE__, " 01241e-1",    1.2410000000e+02, 9,
-__LINE__, " 1241e-1",    1.2410000000e+02, 8,
-__LINE__, "+01241e-1",    1.2410000000e+02, 9,
-__LINE__, "+1241e-1",    1.2410000000e+02, 8,
-__LINE__, "01241e-1",    1.2410000000e+02, 8,
-__LINE__, "1241e-1",    1.2410000000e+02, 7,
-__LINE__, " +.1241e-1",    1.2410000000e-02, 10,
-__LINE__, " +0.1241e-1",    1.2410000000e-02, 11,
-__LINE__, " .1241e-1",    1.2410000000e-02, 9,
-__LINE__, " 0.1241e-1",    1.2410000000e-02, 10,
-__LINE__, "+.1241e-1",    1.2410000000e-02, 9,
-__LINE__, "+0.1241e-1",    1.2410000000e-02, 10,
-__LINE__, ".1241e-1",    1.2410000000e-02, 8,
-__LINE__, "0.1241e-1",    1.2410000000e-02, 9,
-__LINE__, " +01241e-20",    1.2410000000e-17, 11,
-__LINE__, " +1241e-20",    1.2410000000e-17, 10,
-__LINE__, " 01241e-20",    1.2410000000e-17, 10,
-__LINE__, " 1241e-20",    1.2410000000e-17, 9,
-__LINE__, "+01241e-20",    1.2410000000e-17, 10,
-__LINE__, "+1241e-20",    1.2410000000e-17, 9,
-__LINE__, "01241e-20",    1.2410000000e-17, 9,
-__LINE__, "1241e-20",    1.2410000000e-17, 8,
-__LINE__, " +.1241e+1",    1.2410000000e+00, 10,
-__LINE__, " +.1241e1",    1.2410000000e+00, 9,
-__LINE__, " +0.1241e+1",    1.2410000000e+00, 11,
-__LINE__, " +0.1241e1",    1.2410000000e+00, 10,
-__LINE__, " .1241e+1",    1.2410000000e+00, 9,
-__LINE__, " .1241e1",    1.2410000000e+00, 8,
-__LINE__, " 0.1241e+1",    1.2410000000e+00, 10,
-__LINE__, " 0.1241e1",    1.2410000000e+00, 9,
-__LINE__, "+.1241e+1",    1.2410000000e+00, 9,
-__LINE__, "+.1241e1",    1.2410000000e+00, 8,
-__LINE__, "+0.1241e+1",    1.2410000000e+00, 10,
-__LINE__, "+0.1241e1",    1.2410000000e+00, 9,
-__LINE__, ".1241e+1",    1.2410000000e+00, 8,
-__LINE__, ".1241e1",    1.2410000000e+00, 7,
-__LINE__, "0.1241e+1",    1.2410000000e+00, 9,
-__LINE__, "0.1241e1",    1.2410000000e+00, 8,
-__LINE__, " +01241",    1.2410000000e+03, 7,
-__LINE__, " +01241+",    1.2410000000e+03, 7,
-__LINE__, " +01241+1",    1.2410000000e+03, 7,
-__LINE__, " +01241+20",    1.2410000000e+03, 7,
-__LINE__, " +01241-",    1.2410000000e+03, 7,
-__LINE__, " +01241-1",    1.2410000000e+03, 7,
-__LINE__, " +01241-20",    1.2410000000e+03, 7,
-__LINE__, " +01241e",    1.2410000000e+03, 7,
-__LINE__, " +01241e+",    1.2410000000e+03, 7,
-__LINE__, " +01241e-",    1.2410000000e+03, 7,
-__LINE__, " +1241",    1.2410000000e+03, 6,
-__LINE__, " +1241+",    1.2410000000e+03, 6,
-__LINE__, " +1241+1",    1.2410000000e+03, 6,
-__LINE__, " +1241+20",    1.2410000000e+03, 6,
-__LINE__, " +1241-",    1.2410000000e+03, 6,
-__LINE__, " +1241-1",    1.2410000000e+03, 6,
-__LINE__, " +1241-20",    1.2410000000e+03, 6,
-__LINE__, " +1241e",    1.2410000000e+03, 6,
-__LINE__, " +1241e+",    1.2410000000e+03, 6,
-__LINE__, " +1241e-",    1.2410000000e+03, 6,
-__LINE__, " 01241",    1.2410000000e+03, 6,
-__LINE__, " 01241+",    1.2410000000e+03, 6,
-__LINE__, " 01241+1",    1.2410000000e+03, 6,
-__LINE__, " 01241+20",    1.2410000000e+03, 6,
-__LINE__, " 01241-",    1.2410000000e+03, 6,
-__LINE__, " 01241-1",    1.2410000000e+03, 6,
-__LINE__, " 01241-20",    1.2410000000e+03, 6,
-__LINE__, " 01241e",    1.2410000000e+03, 6,
-__LINE__, " 01241e+",    1.2410000000e+03, 6,
-__LINE__, " 01241e-",    1.2410000000e+03, 6,
-__LINE__, " 1241",    1.2410000000e+03, 5,
-__LINE__, " 1241+",    1.2410000000e+03, 5,
-__LINE__, " 1241+1",    1.2410000000e+03, 5,
-__LINE__, " 1241+20",    1.2410000000e+03, 5,
-__LINE__, " 1241-",    1.2410000000e+03, 5,
-__LINE__, " 1241-1",    1.2410000000e+03, 5,
-__LINE__, " 1241-20",    1.2410000000e+03, 5,
-__LINE__, " 1241e",    1.2410000000e+03, 5,
-__LINE__, " 1241e+",    1.2410000000e+03, 5,
-__LINE__, " 1241e-",    1.2410000000e+03, 5,
-__LINE__, "+01241",    1.2410000000e+03, 6,
-__LINE__, "+01241+",    1.2410000000e+03, 6,
-__LINE__, "+01241+1",    1.2410000000e+03, 6,
-__LINE__, "+01241+20",    1.2410000000e+03, 6,
-__LINE__, "+01241-",    1.2410000000e+03, 6,
-__LINE__, "+01241-1",    1.2410000000e+03, 6,
-__LINE__, "+01241-20",    1.2410000000e+03, 6,
-__LINE__, "+01241e",    1.2410000000e+03, 6,
-__LINE__, "+01241e+",    1.2410000000e+03, 6,
-__LINE__, "+01241e-",    1.2410000000e+03, 6,
-__LINE__, "+1241",    1.2410000000e+03, 5,
-__LINE__, "+1241+",    1.2410000000e+03, 5,
-__LINE__, "+1241+1",    1.2410000000e+03, 5,
-__LINE__, "+1241+20",    1.2410000000e+03, 5,
-__LINE__, "+1241-",    1.2410000000e+03, 5,
-__LINE__, "+1241-1",    1.2410000000e+03, 5,
-__LINE__, "+1241-20",    1.2410000000e+03, 5,
-__LINE__, "+1241e",    1.2410000000e+03, 5,
-__LINE__, "+1241e+",    1.2410000000e+03, 5,
-__LINE__, "+1241e-",    1.2410000000e+03, 5,
-__LINE__, "01241",    1.2410000000e+03, 5,
-__LINE__, "01241+",    1.2410000000e+03, 5,
-__LINE__, "01241+1",    1.2410000000e+03, 5,
-__LINE__, "01241+20",    1.2410000000e+03, 5,
-__LINE__, "01241-",    1.2410000000e+03, 5,
-__LINE__, "01241-1",    1.2410000000e+03, 5,
-__LINE__, "01241-20",    1.2410000000e+03, 5,
-__LINE__, "01241e",    1.2410000000e+03, 5,
-__LINE__, "01241e+",    1.2410000000e+03, 5,
-__LINE__, "01241e-",    1.2410000000e+03, 5,
-__LINE__, "1241",    1.2410000000e+03, 4,
-__LINE__, "1241+",    1.2410000000e+03, 4,
-__LINE__, "1241+1",    1.2410000000e+03, 4,
-__LINE__, "1241+20",    1.2410000000e+03, 4,
-__LINE__, "1241-",    1.2410000000e+03, 4,
-__LINE__, "1241-1",    1.2410000000e+03, 4,
-__LINE__, "1241-20",    1.2410000000e+03, 4,
-__LINE__, "1241e",    1.2410000000e+03, 4,
-__LINE__, "1241e+",    1.2410000000e+03, 4,
-__LINE__, "1241e-",    1.2410000000e+03, 4,
-__LINE__, " +01241e+1",    1.2410000000e+04, 10,
-__LINE__, " +01241e1",    1.2410000000e+04, 9,
-__LINE__, " +1241e+1",    1.2410000000e+04, 9,
-__LINE__, " +1241e1",    1.2410000000e+04, 8,
-__LINE__, " 01241e+1",    1.2410000000e+04, 9,
-__LINE__, " 01241e1",    1.2410000000e+04, 8,
-__LINE__, " 1241e+1",    1.2410000000e+04, 8,
-__LINE__, " 1241e1",    1.2410000000e+04, 7,
-__LINE__, "+01241e+1",    1.2410000000e+04, 9,
-__LINE__, "+01241e1",    1.2410000000e+04, 8,
-__LINE__, "+1241e+1",    1.2410000000e+04, 8,
-__LINE__, "+1241e1",    1.2410000000e+04, 7,
-__LINE__, "01241e+1",    1.2410000000e+04, 8,
-__LINE__, "01241e1",    1.2410000000e+04, 7,
-__LINE__, "1241e+1",    1.2410000000e+04, 7,
-__LINE__, "1241e1",    1.2410000000e+04, 6,
-__LINE__, " +.1241e+20",    1.2410000000e+19, 11,
-__LINE__, " +.1241e20",    1.2410000000e+19, 10,
-__LINE__, " +0.1241e+20",    1.2410000000e+19, 12,
-__LINE__, " +0.1241e20",    1.2410000000e+19, 11,
-__LINE__, " .1241e+20",    1.2410000000e+19, 10,
-__LINE__, " .1241e20",    1.2410000000e+19, 9,
-__LINE__, " 0.1241e+20",    1.2410000000e+19, 11,
-__LINE__, " 0.1241e20",    1.2410000000e+19, 10,
-__LINE__, "+.1241e+20",    1.2410000000e+19, 10,
-__LINE__, "+.1241e20",    1.2410000000e+19, 9,
-__LINE__, "+0.1241e+20",    1.2410000000e+19, 11,
-__LINE__, "+0.1241e20",    1.2410000000e+19, 10,
-__LINE__, ".1241e+20",    1.2410000000e+19, 9,
-__LINE__, ".1241e20",    1.2410000000e+19, 8,
-__LINE__, "0.1241e+20",    1.2410000000e+19, 10,
-__LINE__, "0.1241e20",    1.2410000000e+19, 9,
-__LINE__, " +01241e+20",    1.2410000000e+23, 11,
-__LINE__, " +01241e20",    1.2410000000e+23, 10,
-__LINE__, " +1241e+20",    1.2410000000e+23, 10,
-__LINE__, " +1241e20",    1.2410000000e+23, 9,
-__LINE__, " 01241e+20",    1.2410000000e+23, 10,
-__LINE__, " 01241e20",    1.2410000000e+23, 9,
-__LINE__, " 1241e+20",    1.2410000000e+23, 9,
-__LINE__, " 1241e20",    1.2410000000e+23, 8,
-__LINE__, "+01241e+20",    1.2410000000e+23, 10,
-__LINE__, "+01241e20",    1.2410000000e+23, 9,
-__LINE__, "+1241e+20",    1.2410000000e+23, 9,
-__LINE__, "+1241e20",    1.2410000000e+23, 8,
-__LINE__, "01241e+20",    1.2410000000e+23, 9,
-__LINE__, "01241e20",    1.2410000000e+23, 8,
-__LINE__, "1241e+20",    1.2410000000e+23, 8,
-__LINE__, "1241e20",    1.2410000000e+23, 7,
-__LINE__, " +.1241",    1.2410000000e-01, 7,
-__LINE__, " +.1241+",    1.2410000000e-01, 7,
-__LINE__, " +.1241+1",    1.2410000000e-01, 7,
-__LINE__, " +.1241+20",    1.2410000000e-01, 7,
-__LINE__, " +.1241-",    1.2410000000e-01, 7,
-__LINE__, " +.1241-1",    1.2410000000e-01, 7,
-__LINE__, " +.1241-20",    1.2410000000e-01, 7,
-__LINE__, " +.1241e",    1.2410000000e-01, 7,
-__LINE__, " +.1241e+",    1.2410000000e-01, 7,
-__LINE__, " +.1241e-",    1.2410000000e-01, 7,
-__LINE__, " +0.1241",    1.2410000000e-01, 8,
-__LINE__, " +0.1241+",    1.2410000000e-01, 8,
-__LINE__, " +0.1241+1",    1.2410000000e-01, 8,
-__LINE__, " +0.1241+20",    1.2410000000e-01, 8,
-__LINE__, " +0.1241-",    1.2410000000e-01, 8,
-__LINE__, " +0.1241-1",    1.2410000000e-01, 8,
-__LINE__, " +0.1241-20",    1.2410000000e-01, 8,
-__LINE__, " +0.1241e",    1.2410000000e-01, 8,
-__LINE__, " +0.1241e+",    1.2410000000e-01, 8,
-__LINE__, " +0.1241e-",    1.2410000000e-01, 8,
-__LINE__, " .1241",    1.2410000000e-01, 6,
-__LINE__, " .1241+",    1.2410000000e-01, 6,
-__LINE__, " .1241+1",    1.2410000000e-01, 6,
-__LINE__, " .1241+20",    1.2410000000e-01, 6,
-__LINE__, " .1241-",    1.2410000000e-01, 6,
-__LINE__, " .1241-1",    1.2410000000e-01, 6,
-__LINE__, " .1241-20",    1.2410000000e-01, 6,
-__LINE__, " .1241e",    1.2410000000e-01, 6,
-__LINE__, " .1241e+",    1.2410000000e-01, 6,
-__LINE__, " .1241e-",    1.2410000000e-01, 6,
-__LINE__, " 0.1241",    1.2410000000e-01, 7,
-__LINE__, " 0.1241+",    1.2410000000e-01, 7,
-__LINE__, " 0.1241+1",    1.2410000000e-01, 7,
-__LINE__, " 0.1241+20",    1.2410000000e-01, 7,
-__LINE__, " 0.1241-",    1.2410000000e-01, 7,
-__LINE__, " 0.1241-1",    1.2410000000e-01, 7,
-__LINE__, " 0.1241-20",    1.2410000000e-01, 7,
-__LINE__, " 0.1241e",    1.2410000000e-01, 7,
-__LINE__, " 0.1241e+",    1.2410000000e-01, 7,
-__LINE__, " 0.1241e-",    1.2410000000e-01, 7,
-__LINE__, "+.1241",    1.2410000000e-01, 6,
-__LINE__, "+.1241+",    1.2410000000e-01, 6,
-__LINE__, "+.1241+1",    1.2410000000e-01, 6,
-__LINE__, "+.1241+20",    1.2410000000e-01, 6,
-__LINE__, "+.1241-",    1.2410000000e-01, 6,
-__LINE__, "+.1241-1",    1.2410000000e-01, 6,
-__LINE__, "+.1241-20",    1.2410000000e-01, 6,
-__LINE__, "+.1241e",    1.2410000000e-01, 6,
-__LINE__, "+.1241e+",    1.2410000000e-01, 6,
-__LINE__, "+.1241e-",    1.2410000000e-01, 6,
-__LINE__, "+0.1241",    1.2410000000e-01, 7,
-__LINE__, "+0.1241+",    1.2410000000e-01, 7,
-__LINE__, "+0.1241+1",    1.2410000000e-01, 7,
-__LINE__, "+0.1241+20",    1.2410000000e-01, 7,
-__LINE__, "+0.1241-",    1.2410000000e-01, 7,
-__LINE__, "+0.1241-1",    1.2410000000e-01, 7,
-__LINE__, "+0.1241-20",    1.2410000000e-01, 7,
-__LINE__, "+0.1241e",    1.2410000000e-01, 7,
-__LINE__, "+0.1241e+",    1.2410000000e-01, 7,
-__LINE__, "+0.1241e-",    1.2410000000e-01, 7,
-__LINE__, ".1241",    1.2410000000e-01, 5,
-__LINE__, ".1241+",    1.2410000000e-01, 5,
-__LINE__, ".1241+1",    1.2410000000e-01, 5,
-__LINE__, ".1241+20",    1.2410000000e-01, 5,
-__LINE__, ".1241-",    1.2410000000e-01, 5,
-__LINE__, ".1241-1",    1.2410000000e-01, 5,
-__LINE__, ".1241-20",    1.2410000000e-01, 5,
-__LINE__, ".1241e",    1.2410000000e-01, 5,
-__LINE__, ".1241e+",    1.2410000000e-01, 5,
-__LINE__, ".1241e-",    1.2410000000e-01, 5,
-__LINE__, "0.1241",    1.2410000000e-01, 6,
-__LINE__, "0.1241+",    1.2410000000e-01, 6,
-__LINE__, "0.1241+1",    1.2410000000e-01, 6,
-__LINE__, "0.1241+20",    1.2410000000e-01, 6,
-__LINE__, "0.1241-",    1.2410000000e-01, 6,
-__LINE__, "0.1241-1",    1.2410000000e-01, 6,
-__LINE__, "0.1241-20",    1.2410000000e-01, 6,
-__LINE__, "0.1241e",    1.2410000000e-01, 6,
-__LINE__, "0.1241e+",    1.2410000000e-01, 6,
-__LINE__, "0.1241e-",    1.2410000000e-01, 6,
-__LINE__, " +.1241e-20",    1.2410000000e-21, 11,
-__LINE__, " +0.1241e-20",    1.2410000000e-21, 12,
-__LINE__, " .1241e-20",    1.2410000000e-21, 10,
-__LINE__, " 0.1241e-20",    1.2410000000e-21, 11,
-__LINE__, "+.1241e-20",    1.2410000000e-21, 10,
-__LINE__, "+0.1241e-20",    1.2410000000e-21, 11,
-__LINE__, ".1241e-20",    1.2410000000e-21, 9,
-__LINE__, "0.1241e-20",    1.2410000000e-21, 10,
-__LINE__, " +.12411",    1.2411000000e-01, 8,
-__LINE__, " +0.12411",    1.2411000000e-01, 9,
-__LINE__, " .12411",    1.2411000000e-01, 7,
-__LINE__, " 0.12411",    1.2411000000e-01, 8,
-__LINE__, "+.12411",    1.2411000000e-01, 7,
-__LINE__, "+0.12411",    1.2411000000e-01, 8,
-__LINE__, ".12411",    1.2411000000e-01, 6,
-__LINE__, "0.12411",    1.2411000000e-01, 7,
-__LINE__, " +012411",    1.2411000000e+04, 8,
-__LINE__, " +12411",    1.2411000000e+04, 7,
-__LINE__, " 012411",    1.2411000000e+04, 7,
-__LINE__, " 12411",    1.2411000000e+04, 6,
-__LINE__, "+012411",    1.2411000000e+04, 7,
-__LINE__, "+12411",    1.2411000000e+04, 6,
-__LINE__, "012411",    1.2411000000e+04, 6,
-__LINE__, "12411",    1.2411000000e+04, 5,
-__LINE__, " +.124120",    1.2412000000e-01, 9,
-__LINE__, " +0.124120",    1.2412000000e-01, 10,
-__LINE__, " .124120",    1.2412000000e-01, 8,
-__LINE__, " 0.124120",    1.2412000000e-01, 9,
-__LINE__, "+.124120",    1.2412000000e-01, 8,
-__LINE__, "+0.124120",    1.2412000000e-01, 9,
-__LINE__, ".124120",    1.2412000000e-01, 7,
-__LINE__, "0.124120",    1.2412000000e-01, 8,
-__LINE__, " +0124120",    1.2412000000e+05, 9,
-__LINE__, " +124120",    1.2412000000e+05, 8,
-__LINE__, " 0124120",    1.2412000000e+05, 8,
-__LINE__, " 124120",    1.2412000000e+05, 7,
-__LINE__, "+0124120",    1.2412000000e+05, 8,
-__LINE__, "+124120",    1.2412000000e+05, 7,
-__LINE__, "0124120",    1.2412000000e+05, 7,
-__LINE__, "124120",    1.2412000000e+05, 6,
-__LINE__, " +020",    2.0000000000e+01, 5,
-__LINE__, " +20",    2.0000000000e+01, 4,
-__LINE__, " 020",    2.0000000000e+01, 4,
-__LINE__, " 20",    2.0000000000e+01, 3,
-__LINE__, "+020",    2.0000000000e+01, 4,
-__LINE__, "+20",    2.0000000000e+01, 3,
-__LINE__, "020",    2.0000000000e+01, 3,
-__LINE__, "20",    2.0000000000e+01, 2,
-__LINE__, " +.20",    2.0000000000e-01, 5,
-__LINE__, " +0.20",    2.0000000000e-01, 6,
-__LINE__, " .20",    2.0000000000e-01, 4,
-__LINE__, " 0.20",    2.0000000000e-01, 5,
-__LINE__, "+.20",    2.0000000000e-01, 4,
-__LINE__, "+0.20",    2.0000000000e-01, 5,
-__LINE__, ".20",    2.0000000000e-01, 3,
-__LINE__, "0.20",    2.0000000000e-01, 4,
-__LINE__, " +211",    2.1100000000e+02, 5,
-__LINE__, " +211+",    2.1100000000e+02, 5,
-__LINE__, " +211+1",    2.1100000000e+02, 5,
-__LINE__, " +211+20",    2.1100000000e+02, 5,
-__LINE__, " +211-",    2.1100000000e+02, 5,
-__LINE__, " +211-1",    2.1100000000e+02, 5,
-__LINE__, " +211-20",    2.1100000000e+02, 5,
-__LINE__, " +211.",    2.1100000000e+02, 6,
-__LINE__, " +211.+",    2.1100000000e+02, 6,
-__LINE__, " +211.+1",    2.1100000000e+02, 6,
-__LINE__, " +211.+20",    2.1100000000e+02, 6,
-__LINE__, " +211.-",    2.1100000000e+02, 6,
-__LINE__, " +211.-1",    2.1100000000e+02, 6,
-__LINE__, " +211.-20",    2.1100000000e+02, 6,
-__LINE__, " +211.e",    2.1100000000e+02, 6,
-__LINE__, " +211.e+",    2.1100000000e+02, 6,
-__LINE__, " +211.e-",    2.1100000000e+02, 6,
-__LINE__, " +211e",    2.1100000000e+02, 5,
-__LINE__, " +211e+",    2.1100000000e+02, 5,
-__LINE__, " +211e-",    2.1100000000e+02, 5,
-__LINE__, " 211",    2.1100000000e+02, 4,
-__LINE__, " 211+",    2.1100000000e+02, 4,
-__LINE__, " 211+1",    2.1100000000e+02, 4,
-__LINE__, " 211+20",    2.1100000000e+02, 4,
-__LINE__, " 211-",    2.1100000000e+02, 4,
-__LINE__, " 211-1",    2.1100000000e+02, 4,
-__LINE__, " 211-20",    2.1100000000e+02, 4,
-__LINE__, " 211.",    2.1100000000e+02, 5,
-__LINE__, " 211.+",    2.1100000000e+02, 5,
-__LINE__, " 211.+1",    2.1100000000e+02, 5,
-__LINE__, " 211.+20",    2.1100000000e+02, 5,
-__LINE__, " 211.-",    2.1100000000e+02, 5,
-__LINE__, " 211.-1",    2.1100000000e+02, 5,
-__LINE__, " 211.-20",    2.1100000000e+02, 5,
-__LINE__, " 211.e",    2.1100000000e+02, 5,
-__LINE__, " 211.e+",    2.1100000000e+02, 5,
-__LINE__, " 211.e-",    2.1100000000e+02, 5,
-__LINE__, " 211e",    2.1100000000e+02, 4,
-__LINE__, " 211e+",    2.1100000000e+02, 4,
-__LINE__, " 211e-",    2.1100000000e+02, 4,
-__LINE__, "+211",    2.1100000000e+02, 4,
-__LINE__, "+211+",    2.1100000000e+02, 4,
-__LINE__, "+211+1",    2.1100000000e+02, 4,
-__LINE__, "+211+20",    2.1100000000e+02, 4,
-__LINE__, "+211-",    2.1100000000e+02, 4,
-__LINE__, "+211-1",    2.1100000000e+02, 4,
-__LINE__, "+211-20",    2.1100000000e+02, 4,
-__LINE__, "+211.",    2.1100000000e+02, 5,
-__LINE__, "+211.+",    2.1100000000e+02, 5,
-__LINE__, "+211.+1",    2.1100000000e+02, 5,
-__LINE__, "+211.+20",    2.1100000000e+02, 5,
-__LINE__, "+211.-",    2.1100000000e+02, 5,
-__LINE__, "+211.-1",    2.1100000000e+02, 5,
-__LINE__, "+211.-20",    2.1100000000e+02, 5,
-__LINE__, "+211.e",    2.1100000000e+02, 5,
-__LINE__, "+211.e+",    2.1100000000e+02, 5,
-__LINE__, "+211.e-",    2.1100000000e+02, 5,
-__LINE__, "+211e",    2.1100000000e+02, 4,
-__LINE__, "+211e+",    2.1100000000e+02, 4,
-__LINE__, "+211e-",    2.1100000000e+02, 4,
-__LINE__, "211",    2.1100000000e+02, 3,
-__LINE__, "211+",    2.1100000000e+02, 3,
-__LINE__, "211+1",    2.1100000000e+02, 3,
-__LINE__, "211+20",    2.1100000000e+02, 3,
-__LINE__, "211-",    2.1100000000e+02, 3,
-__LINE__, "211-1",    2.1100000000e+02, 3,
-__LINE__, "211-20",    2.1100000000e+02, 3,
-__LINE__, "211.",    2.1100000000e+02, 4,
-__LINE__, "211.+",    2.1100000000e+02, 4,
-__LINE__, "211.+1",    2.1100000000e+02, 4,
-__LINE__, "211.+20",    2.1100000000e+02, 4,
-__LINE__, "211.-",    2.1100000000e+02, 4,
-__LINE__, "211.-1",    2.1100000000e+02, 4,
-__LINE__, "211.-20",    2.1100000000e+02, 4,
-__LINE__, "211.e",    2.1100000000e+02, 4,
-__LINE__, "211.e+",    2.1100000000e+02, 4,
-__LINE__, "211.e-",    2.1100000000e+02, 4,
-__LINE__, "211e",    2.1100000000e+02, 3,
-__LINE__, "211e+",    2.1100000000e+02, 3,
-__LINE__, "211e-",    2.1100000000e+02, 3,
-__LINE__, " +211.e+20",    2.1100000000e+22, 10,
-__LINE__, " +211.e20",    2.1100000000e+22, 9,
-__LINE__, " +211e+20",    2.1100000000e+22, 9,
-__LINE__, " +211e20",    2.1100000000e+22, 8,
-__LINE__, " 211.e+20",    2.1100000000e+22, 9,
-__LINE__, " 211.e20",    2.1100000000e+22, 8,
-__LINE__, " 211e+20",    2.1100000000e+22, 8,
-__LINE__, " 211e20",    2.1100000000e+22, 7,
-__LINE__, "+211.e+20",    2.1100000000e+22, 9,
-__LINE__, "+211.e20",    2.1100000000e+22, 8,
-__LINE__, "+211e+20",    2.1100000000e+22, 8,
-__LINE__, "+211e20",    2.1100000000e+22, 7,
-__LINE__, "211.e+20",    2.1100000000e+22, 8,
-__LINE__, "211.e20",    2.1100000000e+22, 7,
-__LINE__, "211e+20",    2.1100000000e+22, 7,
-__LINE__, "211e20",    2.1100000000e+22, 6,
-__LINE__, " +211.e-1",    2.1100000000e+01, 9,
-__LINE__, " +211e-1",    2.1100000000e+01, 8,
-__LINE__, " 211.e-1",    2.1100000000e+01, 8,
-__LINE__, " 211e-1",    2.1100000000e+01, 7,
-__LINE__, "+211.e-1",    2.1100000000e+01, 8,
-__LINE__, "+211e-1",    2.1100000000e+01, 7,
-__LINE__, "211.e-1",    2.1100000000e+01, 7,
-__LINE__, "211e-1",    2.1100000000e+01, 6,
-__LINE__, " +211.e+1",    2.1100000000e+03, 9,
-__LINE__, " +211.e1",    2.1100000000e+03, 8,
-__LINE__, " +211e+1",    2.1100000000e+03, 8,
-__LINE__, " +211e1",    2.1100000000e+03, 7,
-__LINE__, " 211.e+1",    2.1100000000e+03, 8,
-__LINE__, " 211.e1",    2.1100000000e+03, 7,
-__LINE__, " 211e+1",    2.1100000000e+03, 7,
-__LINE__, " 211e1",    2.1100000000e+03, 6,
-__LINE__, "+211.e+1",    2.1100000000e+03, 8,
-__LINE__, "+211.e1",    2.1100000000e+03, 7,
-__LINE__, "+211e+1",    2.1100000000e+03, 7,
-__LINE__, "+211e1",    2.1100000000e+03, 6,
-__LINE__, "211.e+1",    2.1100000000e+03, 7,
-__LINE__, "211.e1",    2.1100000000e+03, 6,
-__LINE__, "211e+1",    2.1100000000e+03, 6,
-__LINE__, "211e1",    2.1100000000e+03, 5,
-__LINE__, " +211.e-20",    2.1100000000e-18, 10,
-__LINE__, " +211e-20",    2.1100000000e-18, 9,
-__LINE__, " 211.e-20",    2.1100000000e-18, 9,
-__LINE__, " 211e-20",    2.1100000000e-18, 8,
-__LINE__, "+211.e-20",    2.1100000000e-18, 9,
-__LINE__, "+211e-20",    2.1100000000e-18, 8,
-__LINE__, "211.e-20",    2.1100000000e-18, 8,
-__LINE__, "211e-20",    2.1100000000e-18, 7,
-__LINE__, " +211.1",    2.1110000000e+02, 7,
-__LINE__, " 211.1",    2.1110000000e+02, 6,
-__LINE__, "+211.1",    2.1110000000e+02, 6,
-__LINE__, "211.1",    2.1110000000e+02, 5,
-__LINE__, " +2111",    2.1110000000e+03, 6,
-__LINE__, " 2111",    2.1110000000e+03, 5,
-__LINE__, "+2111",    2.1110000000e+03, 5,
-__LINE__, "2111",    2.1110000000e+03, 4,
-__LINE__, " +2111241e-20",    2.1112410000e-14, 13,
-__LINE__, " 2111241e-20",    2.1112410000e-14, 12,
-__LINE__, "+2111241e-20",    2.1112410000e-14, 12,
-__LINE__, "2111241e-20",    2.1112410000e-14, 11,
-__LINE__, " +211.1241e-1",    2.1112410000e+01, 13,
-__LINE__, " 211.1241e-1",    2.1112410000e+01, 12,
-__LINE__, "+211.1241e-1",    2.1112410000e+01, 12,
-__LINE__, "211.1241e-1",    2.1112410000e+01, 11,
-__LINE__, " +211.1241",    2.1112410000e+02, 10,
-__LINE__, " +211.1241+",    2.1112410000e+02, 10,
-__LINE__, " +211.1241+1",    2.1112410000e+02, 10,
-__LINE__, " +211.1241+20",    2.1112410000e+02, 10,
-__LINE__, " +211.1241-",    2.1112410000e+02, 10,
-__LINE__, " +211.1241-1",    2.1112410000e+02, 10,
-__LINE__, " +211.1241-20",    2.1112410000e+02, 10,
-__LINE__, " +211.1241e",    2.1112410000e+02, 10,
-__LINE__, " +211.1241e+",    2.1112410000e+02, 10,
-__LINE__, " +211.1241e-",    2.1112410000e+02, 10,
-__LINE__, " 211.1241",    2.1112410000e+02, 9,
-__LINE__, " 211.1241+",    2.1112410000e+02, 9,
-__LINE__, " 211.1241+1",    2.1112410000e+02, 9,
-__LINE__, " 211.1241+20",    2.1112410000e+02, 9,
-__LINE__, " 211.1241-",    2.1112410000e+02, 9,
-__LINE__, " 211.1241-1",    2.1112410000e+02, 9,
-__LINE__, " 211.1241-20",    2.1112410000e+02, 9,
-__LINE__, " 211.1241e",    2.1112410000e+02, 9,
-__LINE__, " 211.1241e+",    2.1112410000e+02, 9,
-__LINE__, " 211.1241e-",    2.1112410000e+02, 9,
-__LINE__, "+211.1241",    2.1112410000e+02, 9,
-__LINE__, "+211.1241+",    2.1112410000e+02, 9,
-__LINE__, "+211.1241+1",    2.1112410000e+02, 9,
-__LINE__, "+211.1241+20",    2.1112410000e+02, 9,
-__LINE__, "+211.1241-",    2.1112410000e+02, 9,
-__LINE__, "+211.1241-1",    2.1112410000e+02, 9,
-__LINE__, "+211.1241-20",    2.1112410000e+02, 9,
-__LINE__, "+211.1241e",    2.1112410000e+02, 9,
-__LINE__, "+211.1241e+",    2.1112410000e+02, 9,
-__LINE__, "+211.1241e-",    2.1112410000e+02, 9,
-__LINE__, "211.1241",    2.1112410000e+02, 8,
-__LINE__, "211.1241+",    2.1112410000e+02, 8,
-__LINE__, "211.1241+1",    2.1112410000e+02, 8,
-__LINE__, "211.1241+20",    2.1112410000e+02, 8,
-__LINE__, "211.1241-",    2.1112410000e+02, 8,
-__LINE__, "211.1241-1",    2.1112410000e+02, 8,
-__LINE__, "211.1241-20",    2.1112410000e+02, 8,
-__LINE__, "211.1241e",    2.1112410000e+02, 8,
-__LINE__, "211.1241e+",    2.1112410000e+02, 8,
-__LINE__, "211.1241e-",    2.1112410000e+02, 8,
-__LINE__, " +211.1241e+1",    2.1112410000e+03, 13,
-__LINE__, " +211.1241e1",    2.1112410000e+03, 12,
-__LINE__, " 211.1241e+1",    2.1112410000e+03, 12,
-__LINE__, " 211.1241e1",    2.1112410000e+03, 11,
-__LINE__, "+211.1241e+1",    2.1112410000e+03, 12,
-__LINE__, "+211.1241e1",    2.1112410000e+03, 11,
-__LINE__, "211.1241e+1",    2.1112410000e+03, 11,
-__LINE__, "211.1241e1",    2.1112410000e+03, 10,
-__LINE__, " +2111241e-1",    2.1112410000e+05, 12,
-__LINE__, " 2111241e-1",    2.1112410000e+05, 11,
-__LINE__, "+2111241e-1",    2.1112410000e+05, 11,
-__LINE__, "2111241e-1",    2.1112410000e+05, 10,
-__LINE__, " +2111241",    2.1112410000e+06, 9,
-__LINE__, " +2111241+",    2.1112410000e+06, 9,
-__LINE__, " +2111241+1",    2.1112410000e+06, 9,
-__LINE__, " +2111241+20",    2.1112410000e+06, 9,
-__LINE__, " +2111241-",    2.1112410000e+06, 9,
-__LINE__, " +2111241-1",    2.1112410000e+06, 9,
-__LINE__, " +2111241-20",    2.1112410000e+06, 9,
-__LINE__, " +2111241e",    2.1112410000e+06, 9,
-__LINE__, " +2111241e+",    2.1112410000e+06, 9,
-__LINE__, " +2111241e-",    2.1112410000e+06, 9,
-__LINE__, " 2111241",    2.1112410000e+06, 8,
-__LINE__, " 2111241+",    2.1112410000e+06, 8,
-__LINE__, " 2111241+1",    2.1112410000e+06, 8,
-__LINE__, " 2111241+20",    2.1112410000e+06, 8,
-__LINE__, " 2111241-",    2.1112410000e+06, 8,
-__LINE__, " 2111241-1",    2.1112410000e+06, 8,
-__LINE__, " 2111241-20",    2.1112410000e+06, 8,
-__LINE__, " 2111241e",    2.1112410000e+06, 8,
-__LINE__, " 2111241e+",    2.1112410000e+06, 8,
-__LINE__, " 2111241e-",    2.1112410000e+06, 8,
-__LINE__, "+2111241",    2.1112410000e+06, 8,
-__LINE__, "+2111241+",    2.1112410000e+06, 8,
-__LINE__, "+2111241+1",    2.1112410000e+06, 8,
-__LINE__, "+2111241+20",    2.1112410000e+06, 8,
-__LINE__, "+2111241-",    2.1112410000e+06, 8,
-__LINE__, "+2111241-1",    2.1112410000e+06, 8,
-__LINE__, "+2111241-20",    2.1112410000e+06, 8,
-__LINE__, "+2111241e",    2.1112410000e+06, 8,
-__LINE__, "+2111241e+",    2.1112410000e+06, 8,
-__LINE__, "+2111241e-",    2.1112410000e+06, 8,
-__LINE__, "2111241",    2.1112410000e+06, 7,
-__LINE__, "2111241+",    2.1112410000e+06, 7,
-__LINE__, "2111241+1",    2.1112410000e+06, 7,
-__LINE__, "2111241+20",    2.1112410000e+06, 7,
-__LINE__, "2111241-",    2.1112410000e+06, 7,
-__LINE__, "2111241-1",    2.1112410000e+06, 7,
-__LINE__, "2111241-20",    2.1112410000e+06, 7,
-__LINE__, "2111241e",    2.1112410000e+06, 7,
-__LINE__, "2111241e+",    2.1112410000e+06, 7,
-__LINE__, "2111241e-",    2.1112410000e+06, 7,
-__LINE__, " +2111241e+1",    2.1112410000e+07, 12,
-__LINE__, " +2111241e1",    2.1112410000e+07, 11,
-__LINE__, " 2111241e+1",    2.1112410000e+07, 11,
-__LINE__, " 2111241e1",    2.1112410000e+07, 10,
-__LINE__, "+2111241e+1",    2.1112410000e+07, 11,
-__LINE__, "+2111241e1",    2.1112410000e+07, 10,
-__LINE__, "2111241e+1",    2.1112410000e+07, 10,
-__LINE__, "2111241e1",    2.1112410000e+07, 9,
-__LINE__, " +211.1241e+20",    2.1112410000e+22, 14,
-__LINE__, " +211.1241e20",    2.1112410000e+22, 13,
-__LINE__, " 211.1241e+20",    2.1112410000e+22, 13,
-__LINE__, " 211.1241e20",    2.1112410000e+22, 12,
-__LINE__, "+211.1241e+20",    2.1112410000e+22, 13,
-__LINE__, "+211.1241e20",    2.1112410000e+22, 12,
-__LINE__, "211.1241e+20",    2.1112410000e+22, 12,
-__LINE__, "211.1241e20",    2.1112410000e+22, 11,
-__LINE__, " +2111241e+20",    2.1112410000e+26, 13,
-__LINE__, " +2111241e20",    2.1112410000e+26, 12,
-__LINE__, " 2111241e+20",    2.1112410000e+26, 12,
-__LINE__, " 2111241e20",    2.1112410000e+26, 11,
-__LINE__, "+2111241e+20",    2.1112410000e+26, 12,
-__LINE__, "+2111241e20",    2.1112410000e+26, 11,
-__LINE__, "2111241e+20",    2.1112410000e+26, 11,
-__LINE__, "2111241e20",    2.1112410000e+26, 10,
-__LINE__, " +211.1241e-20",    2.1112410000e-18, 14,
-__LINE__, " 211.1241e-20",    2.1112410000e-18, 13,
-__LINE__, "+211.1241e-20",    2.1112410000e-18, 13,
-__LINE__, "211.1241e-20",    2.1112410000e-18, 12,
-__LINE__, " +211.12411",    2.1112411000e+02, 11,
-__LINE__, " 211.12411",    2.1112411000e+02, 10,
-__LINE__, "+211.12411",    2.1112411000e+02, 10,
-__LINE__, "211.12411",    2.1112411000e+02, 9,
-__LINE__, " +21112411",    2.1112411000e+07, 10,
-__LINE__, " 21112411",    2.1112411000e+07, 9,
-__LINE__, "+21112411",    2.1112411000e+07, 9,
-__LINE__, "21112411",    2.1112411000e+07, 8,
-__LINE__, " +211124120",    2.1112412000e+08, 11,
-__LINE__, " 211124120",    2.1112412000e+08, 10,
-__LINE__, "+211124120",    2.1112412000e+08, 10,
-__LINE__, "211124120",    2.1112412000e+08, 9,
-__LINE__, " +211.124120",    2.1112412000e+02, 12,
-__LINE__, " 211.124120",    2.1112412000e+02, 11,
-__LINE__, "+211.124120",    2.1112412000e+02, 11,
-__LINE__, "211.124120",    2.1112412000e+02, 10,
-__LINE__, " +211.20",    2.1120000000e+02, 8,
-__LINE__, " 211.20",    2.1120000000e+02, 7,
-__LINE__, "+211.20",    2.1120000000e+02, 7,
-__LINE__, "211.20",    2.1120000000e+02, 6,
-__LINE__, " +21120",    2.1120000000e+04, 7,
-__LINE__, " 21120",    2.1120000000e+04, 6,
-__LINE__, "+21120",    2.1120000000e+04, 6,
-__LINE__, "21120",    2.1120000000e+04, 5,
-__LINE__, " +211.8e-1",    2.1180000000e+01, 10,
-__LINE__, " 211.8e-1",    2.1180000000e+01, 9,
-__LINE__, "+211.8e-1",    2.1180000000e+01, 9,
-__LINE__, "211.8e-1",    2.1180000000e+01, 8,
-__LINE__, " +211.8e+1",    2.1180000000e+03, 10,
-__LINE__, " +211.8e1",    2.1180000000e+03, 9,
-__LINE__, " +2118",    2.1180000000e+03, 6,
-__LINE__, " +2118+",    2.1180000000e+03, 6,
-__LINE__, " +2118+1",    2.1180000000e+03, 6,
-__LINE__, " +2118+20",    2.1180000000e+03, 6,
-__LINE__, " +2118-",    2.1180000000e+03, 6,
-__LINE__, " +2118-1",    2.1180000000e+03, 6,
-__LINE__, " +2118-20",    2.1180000000e+03, 6,
-__LINE__, " +2118e",    2.1180000000e+03, 6,
-__LINE__, " +2118e+",    2.1180000000e+03, 6,
-__LINE__, " +2118e-",    2.1180000000e+03, 6,
-__LINE__, " 211.8e+1",    2.1180000000e+03, 9,
-__LINE__, " 211.8e1",    2.1180000000e+03, 8,
-__LINE__, " 2118",    2.1180000000e+03, 5,
-__LINE__, " 2118+",    2.1180000000e+03, 5,
-__LINE__, " 2118+1",    2.1180000000e+03, 5,
-__LINE__, " 2118+20",    2.1180000000e+03, 5,
-__LINE__, " 2118-",    2.1180000000e+03, 5,
-__LINE__, " 2118-1",    2.1180000000e+03, 5,
-__LINE__, " 2118-20",    2.1180000000e+03, 5,
-__LINE__, " 2118e",    2.1180000000e+03, 5,
-__LINE__, " 2118e+",    2.1180000000e+03, 5,
-__LINE__, " 2118e-",    2.1180000000e+03, 5,
-__LINE__, "+211.8e+1",    2.1180000000e+03, 9,
-__LINE__, "+211.8e1",    2.1180000000e+03, 8,
-__LINE__, "+2118",    2.1180000000e+03, 5,
-__LINE__, "+2118+",    2.1180000000e+03, 5,
-__LINE__, "+2118+1",    2.1180000000e+03, 5,
-__LINE__, "+2118+20",    2.1180000000e+03, 5,
-__LINE__, "+2118-",    2.1180000000e+03, 5,
-__LINE__, "+2118-1",    2.1180000000e+03, 5,
-__LINE__, "+2118-20",    2.1180000000e+03, 5,
-__LINE__, "+2118e",    2.1180000000e+03, 5,
-__LINE__, "+2118e+",    2.1180000000e+03, 5,
-__LINE__, "+2118e-",    2.1180000000e+03, 5,
-__LINE__, "211.8e+1",    2.1180000000e+03, 8,
-__LINE__, "211.8e1",    2.1180000000e+03, 7,
-__LINE__, "2118",    2.1180000000e+03, 4,
-__LINE__, "2118+",    2.1180000000e+03, 4,
-__LINE__, "2118+1",    2.1180000000e+03, 4,
-__LINE__, "2118+20",    2.1180000000e+03, 4,
-__LINE__, "2118-",    2.1180000000e+03, 4,
-__LINE__, "2118-1",    2.1180000000e+03, 4,
-__LINE__, "2118-20",    2.1180000000e+03, 4,
-__LINE__, "2118e",    2.1180000000e+03, 4,
-__LINE__, "2118e+",    2.1180000000e+03, 4,
-__LINE__, "2118e-",    2.1180000000e+03, 4,
-__LINE__, " +2118e+1",    2.1180000000e+04, 9,
-__LINE__, " +2118e1",    2.1180000000e+04, 8,
-__LINE__, " 2118e+1",    2.1180000000e+04, 8,
-__LINE__, " 2118e1",    2.1180000000e+04, 7,
-__LINE__, "+2118e+1",    2.1180000000e+04, 8,
-__LINE__, "+2118e1",    2.1180000000e+04, 7,
-__LINE__, "2118e+1",    2.1180000000e+04, 7,
-__LINE__, "2118e1",    2.1180000000e+04, 6,
-__LINE__, " +2118e+20",    2.1180000000e+23, 10,
-__LINE__, " +2118e20",    2.1180000000e+23, 9,
-__LINE__, " 2118e+20",    2.1180000000e+23, 9,
-__LINE__, " 2118e20",    2.1180000000e+23, 8,
-__LINE__, "+2118e+20",    2.1180000000e+23, 9,
-__LINE__, "+2118e20",    2.1180000000e+23, 8,
-__LINE__, "2118e+20",    2.1180000000e+23, 8,
-__LINE__, "2118e20",    2.1180000000e+23, 7,
-__LINE__, " +2118e-20",    2.1180000000e-17, 10,
-__LINE__, " 2118e-20",    2.1180000000e-17, 9,
-__LINE__, "+2118e-20",    2.1180000000e-17, 9,
-__LINE__, "2118e-20",    2.1180000000e-17, 8,
-__LINE__, " +211.8e-20",    2.1180000000e-18, 11,
-__LINE__, " 211.8e-20",    2.1180000000e-18, 10,
-__LINE__, "+211.8e-20",    2.1180000000e-18, 10,
-__LINE__, "211.8e-20",    2.1180000000e-18, 9,
-__LINE__, " +211.8",    2.1180000000e+02, 7,
-__LINE__, " +211.8+",    2.1180000000e+02, 7,
-__LINE__, " +211.8+1",    2.1180000000e+02, 7,
-__LINE__, " +211.8+20",    2.1180000000e+02, 7,
-__LINE__, " +211.8-",    2.1180000000e+02, 7,
-__LINE__, " +211.8-1",    2.1180000000e+02, 7,
-__LINE__, " +211.8-20",    2.1180000000e+02, 7,
-__LINE__, " +211.8e",    2.1180000000e+02, 7,
-__LINE__, " +211.8e+",    2.1180000000e+02, 7,
-__LINE__, " +211.8e-",    2.1180000000e+02, 7,
-__LINE__, " +2118e-1",    2.1180000000e+02, 9,
-__LINE__, " 211.8",    2.1180000000e+02, 6,
-__LINE__, " 211.8+",    2.1180000000e+02, 6,
-__LINE__, " 211.8+1",    2.1180000000e+02, 6,
-__LINE__, " 211.8+20",    2.1180000000e+02, 6,
-__LINE__, " 211.8-",    2.1180000000e+02, 6,
-__LINE__, " 211.8-1",    2.1180000000e+02, 6,
-__LINE__, " 211.8-20",    2.1180000000e+02, 6,
-__LINE__, " 211.8e",    2.1180000000e+02, 6,
-__LINE__, " 211.8e+",    2.1180000000e+02, 6,
-__LINE__, " 211.8e-",    2.1180000000e+02, 6,
-__LINE__, " 2118e-1",    2.1180000000e+02, 8,
-__LINE__, "+211.8",    2.1180000000e+02, 6,
-__LINE__, "+211.8+",    2.1180000000e+02, 6,
-__LINE__, "+211.8+1",    2.1180000000e+02, 6,
-__LINE__, "+211.8+20",    2.1180000000e+02, 6,
-__LINE__, "+211.8-",    2.1180000000e+02, 6,
-__LINE__, "+211.8-1",    2.1180000000e+02, 6,
-__LINE__, "+211.8-20",    2.1180000000e+02, 6,
-__LINE__, "+211.8e",    2.1180000000e+02, 6,
-__LINE__, "+211.8e+",    2.1180000000e+02, 6,
-__LINE__, "+211.8e-",    2.1180000000e+02, 6,
-__LINE__, "+2118e-1",    2.1180000000e+02, 8,
-__LINE__, "211.8",    2.1180000000e+02, 5,
-__LINE__, "211.8+",    2.1180000000e+02, 5,
-__LINE__, "211.8+1",    2.1180000000e+02, 5,
-__LINE__, "211.8+20",    2.1180000000e+02, 5,
-__LINE__, "211.8-",    2.1180000000e+02, 5,
-__LINE__, "211.8-1",    2.1180000000e+02, 5,
-__LINE__, "211.8-20",    2.1180000000e+02, 5,
-__LINE__, "211.8e",    2.1180000000e+02, 5,
-__LINE__, "211.8e+",    2.1180000000e+02, 5,
-__LINE__, "211.8e-",    2.1180000000e+02, 5,
-__LINE__, "2118e-1",    2.1180000000e+02, 7,
-__LINE__, " +211.8e+20",    2.1180000000e+22, 11,
-__LINE__, " +211.8e20",    2.1180000000e+22, 10,
-__LINE__, " 211.8e+20",    2.1180000000e+22, 10,
-__LINE__, " 211.8e20",    2.1180000000e+22, 9,
-__LINE__, "+211.8e+20",    2.1180000000e+22, 10,
-__LINE__, "+211.8e20",    2.1180000000e+22, 9,
-__LINE__, "211.8e+20",    2.1180000000e+22, 9,
-__LINE__, "211.8e20",    2.1180000000e+22, 8,
-__LINE__, " +211.81",    2.1181000000e+02, 8,
-__LINE__, " 211.81",    2.1181000000e+02, 7,
-__LINE__, "+211.81",    2.1181000000e+02, 7,
-__LINE__, "211.81",    2.1181000000e+02, 6,
-__LINE__, " +21181",    2.1181000000e+04, 7,
-__LINE__, " 21181",    2.1181000000e+04, 6,
-__LINE__, "+21181",    2.1181000000e+04, 6,
-__LINE__, "21181",    2.1181000000e+04, 5,
-__LINE__, " +211.820",    2.1182000000e+02, 9,
-__LINE__, " 211.820",    2.1182000000e+02, 8,
-__LINE__, "+211.820",    2.1182000000e+02, 8,
-__LINE__, "211.820",    2.1182000000e+02, 7,
-__LINE__, " +211820",    2.1182000000e+05, 8,
-__LINE__, " 211820",    2.1182000000e+05, 7,
-__LINE__, "+211820",    2.1182000000e+05, 7,
-__LINE__, "211820",    2.1182000000e+05, 6,
-__LINE__, " +2119e-20",    2.1190000000e-17, 10,
-__LINE__, " 2119e-20",    2.1190000000e-17, 9,
-__LINE__, "+2119e-20",    2.1190000000e-17, 9,
-__LINE__, "2119e-20",    2.1190000000e-17, 8,
-__LINE__, " +211.9e-1",    2.1190000000e+01, 10,
-__LINE__, " 211.9e-1",    2.1190000000e+01, 9,
-__LINE__, "+211.9e-1",    2.1190000000e+01, 9,
-__LINE__, "211.9e-1",    2.1190000000e+01, 8,
-__LINE__, " +211.9",    2.1190000000e+02, 7,
-__LINE__, " +211.9+",    2.1190000000e+02, 7,
-__LINE__, " +211.9+1",    2.1190000000e+02, 7,
-__LINE__, " +211.9+20",    2.1190000000e+02, 7,
-__LINE__, " +211.9-",    2.1190000000e+02, 7,
-__LINE__, " +211.9-1",    2.1190000000e+02, 7,
-__LINE__, " +211.9-20",    2.1190000000e+02, 7,
-__LINE__, " +211.9e",    2.1190000000e+02, 7,
-__LINE__, " +211.9e+",    2.1190000000e+02, 7,
-__LINE__, " +211.9e-",    2.1190000000e+02, 7,
-__LINE__, " +2119e-1",    2.1190000000e+02, 9,
-__LINE__, " 211.9",    2.1190000000e+02, 6,
-__LINE__, " 211.9+",    2.1190000000e+02, 6,
-__LINE__, " 211.9+1",    2.1190000000e+02, 6,
-__LINE__, " 211.9+20",    2.1190000000e+02, 6,
-__LINE__, " 211.9-",    2.1190000000e+02, 6,
-__LINE__, " 211.9-1",    2.1190000000e+02, 6,
-__LINE__, " 211.9-20",    2.1190000000e+02, 6,
-__LINE__, " 211.9e",    2.1190000000e+02, 6,
-__LINE__, " 211.9e+",    2.1190000000e+02, 6,
-__LINE__, " 211.9e-",    2.1190000000e+02, 6,
-__LINE__, " 2119e-1",    2.1190000000e+02, 8,
-__LINE__, "+211.9",    2.1190000000e+02, 6,
-__LINE__, "+211.9+",    2.1190000000e+02, 6,
-__LINE__, "+211.9+1",    2.1190000000e+02, 6,
-__LINE__, "+211.9+20",    2.1190000000e+02, 6,
-__LINE__, "+211.9-",    2.1190000000e+02, 6,
-__LINE__, "+211.9-1",    2.1190000000e+02, 6,
-__LINE__, "+211.9-20",    2.1190000000e+02, 6,
-__LINE__, "+211.9e",    2.1190000000e+02, 6,
-__LINE__, "+211.9e+",    2.1190000000e+02, 6,
-__LINE__, "+211.9e-",    2.1190000000e+02, 6,
-__LINE__, "+2119e-1",    2.1190000000e+02, 8,
-__LINE__, "211.9",    2.1190000000e+02, 5,
-__LINE__, "211.9+",    2.1190000000e+02, 5,
-__LINE__, "211.9+1",    2.1190000000e+02, 5,
-__LINE__, "211.9+20",    2.1190000000e+02, 5,
-__LINE__, "211.9-",    2.1190000000e+02, 5,
-__LINE__, "211.9-1",    2.1190000000e+02, 5,
-__LINE__, "211.9-20",    2.1190000000e+02, 5,
-__LINE__, "211.9e",    2.1190000000e+02, 5,
-__LINE__, "211.9e+",    2.1190000000e+02, 5,
-__LINE__, "211.9e-",    2.1190000000e+02, 5,
-__LINE__, "2119e-1",    2.1190000000e+02, 7,
-__LINE__, " +211.9e+1",    2.1190000000e+03, 10,
-__LINE__, " +211.9e1",    2.1190000000e+03, 9,
-__LINE__, " +2119",    2.1190000000e+03, 6,
-__LINE__, " +2119+",    2.1190000000e+03, 6,
-__LINE__, " +2119+1",    2.1190000000e+03, 6,
-__LINE__, " +2119+20",    2.1190000000e+03, 6,
-__LINE__, " +2119-",    2.1190000000e+03, 6,
-__LINE__, " +2119-1",    2.1190000000e+03, 6,
-__LINE__, " +2119-20",    2.1190000000e+03, 6,
-__LINE__, " +2119e",    2.1190000000e+03, 6,
-__LINE__, " +2119e+",    2.1190000000e+03, 6,
-__LINE__, " +2119e-",    2.1190000000e+03, 6,
-__LINE__, " 211.9e+1",    2.1190000000e+03, 9,
-__LINE__, " 211.9e1",    2.1190000000e+03, 8,
-__LINE__, " 2119",    2.1190000000e+03, 5,
-__LINE__, " 2119+",    2.1190000000e+03, 5,
-__LINE__, " 2119+1",    2.1190000000e+03, 5,
-__LINE__, " 2119+20",    2.1190000000e+03, 5,
-__LINE__, " 2119-",    2.1190000000e+03, 5,
-__LINE__, " 2119-1",    2.1190000000e+03, 5,
-__LINE__, " 2119-20",    2.1190000000e+03, 5,
-__LINE__, " 2119e",    2.1190000000e+03, 5,
-__LINE__, " 2119e+",    2.1190000000e+03, 5,
-__LINE__, " 2119e-",    2.1190000000e+03, 5,
-__LINE__, "+211.9e+1",    2.1190000000e+03, 9,
-__LINE__, "+211.9e1",    2.1190000000e+03, 8,
-__LINE__, "+2119",    2.1190000000e+03, 5,
-__LINE__, "+2119+",    2.1190000000e+03, 5,
-__LINE__, "+2119+1",    2.1190000000e+03, 5,
-__LINE__, "+2119+20",    2.1190000000e+03, 5,
-__LINE__, "+2119-",    2.1190000000e+03, 5,
-__LINE__, "+2119-1",    2.1190000000e+03, 5,
-__LINE__, "+2119-20",    2.1190000000e+03, 5,
-__LINE__, "+2119e",    2.1190000000e+03, 5,
-__LINE__, "+2119e+",    2.1190000000e+03, 5,
-__LINE__, "+2119e-",    2.1190000000e+03, 5,
-__LINE__, "211.9e+1",    2.1190000000e+03, 8,
-__LINE__, "211.9e1",    2.1190000000e+03, 7,
-__LINE__, "2119",    2.1190000000e+03, 4,
-__LINE__, "2119+",    2.1190000000e+03, 4,
-__LINE__, "2119+1",    2.1190000000e+03, 4,
-__LINE__, "2119+20",    2.1190000000e+03, 4,
-__LINE__, "2119-",    2.1190000000e+03, 4,
-__LINE__, "2119-1",    2.1190000000e+03, 4,
-__LINE__, "2119-20",    2.1190000000e+03, 4,
-__LINE__, "2119e",    2.1190000000e+03, 4,
-__LINE__, "2119e+",    2.1190000000e+03, 4,
-__LINE__, "2119e-",    2.1190000000e+03, 4,
-__LINE__, " +2119e+1",    2.1190000000e+04, 9,
-__LINE__, " +2119e1",    2.1190000000e+04, 8,
-__LINE__, " 2119e+1",    2.1190000000e+04, 8,
-__LINE__, " 2119e1",    2.1190000000e+04, 7,
-__LINE__, "+2119e+1",    2.1190000000e+04, 8,
-__LINE__, "+2119e1",    2.1190000000e+04, 7,
-__LINE__, "2119e+1",    2.1190000000e+04, 7,
-__LINE__, "2119e1",    2.1190000000e+04, 6,
-__LINE__, " +211.9e+20",    2.1190000000e+22, 11,
-__LINE__, " +211.9e20",    2.1190000000e+22, 10,
-__LINE__, " 211.9e+20",    2.1190000000e+22, 10,
-__LINE__, " 211.9e20",    2.1190000000e+22, 9,
-__LINE__, "+211.9e+20",    2.1190000000e+22, 10,
-__LINE__, "+211.9e20",    2.1190000000e+22, 9,
-__LINE__, "211.9e+20",    2.1190000000e+22, 9,
-__LINE__, "211.9e20",    2.1190000000e+22, 8,
-__LINE__, " +2119e+20",    2.1190000000e+23, 10,
-__LINE__, " +2119e20",    2.1190000000e+23, 9,
-__LINE__, " 2119e+20",    2.1190000000e+23, 9,
-__LINE__, " 2119e20",    2.1190000000e+23, 8,
-__LINE__, "+2119e+20",    2.1190000000e+23, 9,
-__LINE__, "+2119e20",    2.1190000000e+23, 8,
-__LINE__, "2119e+20",    2.1190000000e+23, 8,
-__LINE__, "2119e20",    2.1190000000e+23, 7,
-__LINE__, " +211.9e-20",    2.1190000000e-18, 11,
-__LINE__, " 211.9e-20",    2.1190000000e-18, 10,
-__LINE__, "+211.9e-20",    2.1190000000e-18, 10,
-__LINE__, "211.9e-20",    2.1190000000e-18, 9,
-__LINE__, " +211.91",    2.1191000000e+02, 8,
-__LINE__, " 211.91",    2.1191000000e+02, 7,
-__LINE__, "+211.91",    2.1191000000e+02, 7,
-__LINE__, "211.91",    2.1191000000e+02, 6,
-__LINE__, " +21191",    2.1191000000e+04, 7,
-__LINE__, " 21191",    2.1191000000e+04, 6,
-__LINE__, "+21191",    2.1191000000e+04, 6,
-__LINE__, "21191",    2.1191000000e+04, 5,
-__LINE__, " +211.920",    2.1192000000e+02, 9,
-__LINE__, " 211.920",    2.1192000000e+02, 8,
-__LINE__, "+211.920",    2.1192000000e+02, 8,
-__LINE__, "211.920",    2.1192000000e+02, 7,
-__LINE__, " +211920",    2.1192000000e+05, 8,
-__LINE__, " 211920",    2.1192000000e+05, 7,
-__LINE__, "+211920",    2.1192000000e+05, 7,
-__LINE__, "211920",    2.1192000000e+05, 6,
-__LINE__, " +612.e-1",    6.1200000000e+01, 9,
-__LINE__, " +612e-1",    6.1200000000e+01, 8,
-__LINE__, " 612.e-1",    6.1200000000e+01, 8,
-__LINE__, " 612e-1",    6.1200000000e+01, 7,
-__LINE__, "+612.e-1",    6.1200000000e+01, 8,
-__LINE__, "+612e-1",    6.1200000000e+01, 7,
-__LINE__, "612.e-1",    6.1200000000e+01, 7,
-__LINE__, "612e-1",    6.1200000000e+01, 6,
-__LINE__, " +612",    6.1200000000e+02, 5,
-__LINE__, " +612+",    6.1200000000e+02, 5,
-__LINE__, " +612+1",    6.1200000000e+02, 5,
-__LINE__, " +612+20",    6.1200000000e+02, 5,
-__LINE__, " +612-",    6.1200000000e+02, 5,
-__LINE__, " +612-1",    6.1200000000e+02, 5,
-__LINE__, " +612-20",    6.1200000000e+02, 5,
-__LINE__, " +612.",    6.1200000000e+02, 6,
-__LINE__, " +612.+",    6.1200000000e+02, 6,
-__LINE__, " +612.+1",    6.1200000000e+02, 6,
-__LINE__, " +612.+20",    6.1200000000e+02, 6,
-__LINE__, " +612.-",    6.1200000000e+02, 6,
-__LINE__, " +612.-1",    6.1200000000e+02, 6,
-__LINE__, " +612.-20",    6.1200000000e+02, 6,
-__LINE__, " +612.e",    6.1200000000e+02, 6,
-__LINE__, " +612.e+",    6.1200000000e+02, 6,
-__LINE__, " +612.e-",    6.1200000000e+02, 6,
-__LINE__, " +612e",    6.1200000000e+02, 5,
-__LINE__, " +612e+",    6.1200000000e+02, 5,
-__LINE__, " +612e-",    6.1200000000e+02, 5,
-__LINE__, " 612",    6.1200000000e+02, 4,
-__LINE__, " 612+",    6.1200000000e+02, 4,
-__LINE__, " 612+1",    6.1200000000e+02, 4,
-__LINE__, " 612+20",    6.1200000000e+02, 4,
-__LINE__, " 612-",    6.1200000000e+02, 4,
-__LINE__, " 612-1",    6.1200000000e+02, 4,
-__LINE__, " 612-20",    6.1200000000e+02, 4,
-__LINE__, " 612.",    6.1200000000e+02, 5,
-__LINE__, " 612.+",    6.1200000000e+02, 5,
-__LINE__, " 612.+1",    6.1200000000e+02, 5,
-__LINE__, " 612.+20",    6.1200000000e+02, 5,
-__LINE__, " 612.-",    6.1200000000e+02, 5,
-__LINE__, " 612.-1",    6.1200000000e+02, 5,
-__LINE__, " 612.-20",    6.1200000000e+02, 5,
-__LINE__, " 612.e",    6.1200000000e+02, 5,
-__LINE__, " 612.e+",    6.1200000000e+02, 5,
-__LINE__, " 612.e-",    6.1200000000e+02, 5,
-__LINE__, " 612e",    6.1200000000e+02, 4,
-__LINE__, " 612e+",    6.1200000000e+02, 4,
-__LINE__, " 612e-",    6.1200000000e+02, 4,
-__LINE__, "+612",    6.1200000000e+02, 4,
-__LINE__, "+612+",    6.1200000000e+02, 4,
-__LINE__, "+612+1",    6.1200000000e+02, 4,
-__LINE__, "+612+20",    6.1200000000e+02, 4,
-__LINE__, "+612-",    6.1200000000e+02, 4,
-__LINE__, "+612-1",    6.1200000000e+02, 4,
-__LINE__, "+612-20",    6.1200000000e+02, 4,
-__LINE__, "+612.",    6.1200000000e+02, 5,
-__LINE__, "+612.+",    6.1200000000e+02, 5,
-__LINE__, "+612.+1",    6.1200000000e+02, 5,
-__LINE__, "+612.+20",    6.1200000000e+02, 5,
-__LINE__, "+612.-",    6.1200000000e+02, 5,
-__LINE__, "+612.-1",    6.1200000000e+02, 5,
-__LINE__, "+612.-20",    6.1200000000e+02, 5,
-__LINE__, "+612.e",    6.1200000000e+02, 5,
-__LINE__, "+612.e+",    6.1200000000e+02, 5,
-__LINE__, "+612.e-",    6.1200000000e+02, 5,
-__LINE__, "+612e",    6.1200000000e+02, 4,
-__LINE__, "+612e+",    6.1200000000e+02, 4,
-__LINE__, "+612e-",    6.1200000000e+02, 4,
-__LINE__, "612",    6.1200000000e+02, 3,
-__LINE__, "612+",    6.1200000000e+02, 3,
-__LINE__, "612+1",    6.1200000000e+02, 3,
-__LINE__, "612+20",    6.1200000000e+02, 3,
-__LINE__, "612-",    6.1200000000e+02, 3,
-__LINE__, "612-1",    6.1200000000e+02, 3,
-__LINE__, "612-20",    6.1200000000e+02, 3,
-__LINE__, "612.",    6.1200000000e+02, 4,
-__LINE__, "612.+",    6.1200000000e+02, 4,
-__LINE__, "612.+1",    6.1200000000e+02, 4,
-__LINE__, "612.+20",    6.1200000000e+02, 4,
-__LINE__, "612.-",    6.1200000000e+02, 4,
-__LINE__, "612.-1",    6.1200000000e+02, 4,
-__LINE__, "612.-20",    6.1200000000e+02, 4,
-__LINE__, "612.e",    6.1200000000e+02, 4,
-__LINE__, "612.e+",    6.1200000000e+02, 4,
-__LINE__, "612.e-",    6.1200000000e+02, 4,
-__LINE__, "612e",    6.1200000000e+02, 3,
-__LINE__, "612e+",    6.1200000000e+02, 3,
-__LINE__, "612e-",    6.1200000000e+02, 3,
-__LINE__, " +612.e+1",    6.1200000000e+03, 9,
-__LINE__, " +612.e1",    6.1200000000e+03, 8,
-__LINE__, " +612e+1",    6.1200000000e+03, 8,
-__LINE__, " +612e1",    6.1200000000e+03, 7,
-__LINE__, " 612.e+1",    6.1200000000e+03, 8,
-__LINE__, " 612.e1",    6.1200000000e+03, 7,
-__LINE__, " 612e+1",    6.1200000000e+03, 7,
-__LINE__, " 612e1",    6.1200000000e+03, 6,
-__LINE__, "+612.e+1",    6.1200000000e+03, 8,
-__LINE__, "+612.e1",    6.1200000000e+03, 7,
-__LINE__, "+612e+1",    6.1200000000e+03, 7,
-__LINE__, "+612e1",    6.1200000000e+03, 6,
-__LINE__, "612.e+1",    6.1200000000e+03, 7,
-__LINE__, "612.e1",    6.1200000000e+03, 6,
-__LINE__, "612e+1",    6.1200000000e+03, 6,
-__LINE__, "612e1",    6.1200000000e+03, 5,
-__LINE__, " +612.e+20",    6.1200000000e+22, 10,
-__LINE__, " +612.e20",    6.1200000000e+22, 9,
-__LINE__, " +612e+20",    6.1200000000e+22, 9,
-__LINE__, " +612e20",    6.1200000000e+22, 8,
-__LINE__, " 612.e+20",    6.1200000000e+22, 9,
-__LINE__, " 612.e20",    6.1200000000e+22, 8,
-__LINE__, " 612e+20",    6.1200000000e+22, 8,
-__LINE__, " 612e20",    6.1200000000e+22, 7,
-__LINE__, "+612.e+20",    6.1200000000e+22, 9,
-__LINE__, "+612.e20",    6.1200000000e+22, 8,
-__LINE__, "+612e+20",    6.1200000000e+22, 8,
-__LINE__, "+612e20",    6.1200000000e+22, 7,
-__LINE__, "612.e+20",    6.1200000000e+22, 8,
-__LINE__, "612.e20",    6.1200000000e+22, 7,
-__LINE__, "612e+20",    6.1200000000e+22, 7,
-__LINE__, "612e20",    6.1200000000e+22, 6,
-__LINE__, " +612.e-20",    6.1200000000e-18, 10,
-__LINE__, " +612e-20",    6.1200000000e-18, 9,
-__LINE__, " 612.e-20",    6.1200000000e-18, 9,
-__LINE__, " 612e-20",    6.1200000000e-18, 8,
-__LINE__, "+612.e-20",    6.1200000000e-18, 9,
-__LINE__, "+612e-20",    6.1200000000e-18, 8,
-__LINE__, "612.e-20",    6.1200000000e-18, 8,
-__LINE__, "612e-20",    6.1200000000e-18, 7,
-__LINE__, " +612.1",    6.1210000000e+02, 7,
-__LINE__, " 612.1",    6.1210000000e+02, 6,
-__LINE__, "+612.1",    6.1210000000e+02, 6,
-__LINE__, "612.1",    6.1210000000e+02, 5,
-__LINE__, " +6121",    6.1210000000e+03, 6,
-__LINE__, " 6121",    6.1210000000e+03, 5,
-__LINE__, "+6121",    6.1210000000e+03, 5,
-__LINE__, "6121",    6.1210000000e+03, 4,
-__LINE__, " +612.1241e-1",    6.1212410000e+01, 13,
-__LINE__, " 612.1241e-1",    6.1212410000e+01, 12,
-__LINE__, "+612.1241e-1",    6.1212410000e+01, 12,
-__LINE__, "612.1241e-1",    6.1212410000e+01, 11,
-__LINE__, " +612.1241e+1",    6.1212410000e+03, 13,
-__LINE__, " +612.1241e1",    6.1212410000e+03, 12,
-__LINE__, " 612.1241e+1",    6.1212410000e+03, 12,
-__LINE__, " 612.1241e1",    6.1212410000e+03, 11,
-__LINE__, "+612.1241e+1",    6.1212410000e+03, 12,
-__LINE__, "+612.1241e1",    6.1212410000e+03, 11,
-__LINE__, "612.1241e+1",    6.1212410000e+03, 11,
-__LINE__, "612.1241e1",    6.1212410000e+03, 10,
-__LINE__, " +6121241e-1",    6.1212410000e+05, 12,
-__LINE__, " 6121241e-1",    6.1212410000e+05, 11,
-__LINE__, "+6121241e-1",    6.1212410000e+05, 11,
-__LINE__, "6121241e-1",    6.1212410000e+05, 10,
-__LINE__, " +6121241e+1",    6.1212410000e+07, 12,
-__LINE__, " +6121241e1",    6.1212410000e+07, 11,
-__LINE__, " 6121241e+1",    6.1212410000e+07, 11,
-__LINE__, " 6121241e1",    6.1212410000e+07, 10,
-__LINE__, "+6121241e+1",    6.1212410000e+07, 11,
-__LINE__, "+6121241e1",    6.1212410000e+07, 10,
-__LINE__, "6121241e+1",    6.1212410000e+07, 10,
-__LINE__, "6121241e1",    6.1212410000e+07, 9,
-__LINE__, " +6121241e-20",    6.1212410000e-14, 13,
-__LINE__, " 6121241e-20",    6.1212410000e-14, 12,
-__LINE__, "+6121241e-20",    6.1212410000e-14, 12,
-__LINE__, "6121241e-20",    6.1212410000e-14, 11,
-__LINE__, " +612.1241",    6.1212410000e+02, 10,
-__LINE__, " +612.1241+",    6.1212410000e+02, 10,
-__LINE__, " +612.1241+1",    6.1212410000e+02, 10,
-__LINE__, " +612.1241+20",    6.1212410000e+02, 10,
-__LINE__, " +612.1241-",    6.1212410000e+02, 10,
-__LINE__, " +612.1241-1",    6.1212410000e+02, 10,
-__LINE__, " +612.1241-20",    6.1212410000e+02, 10,
-__LINE__, " +612.1241e",    6.1212410000e+02, 10,
-__LINE__, " +612.1241e+",    6.1212410000e+02, 10,
-__LINE__, " +612.1241e-",    6.1212410000e+02, 10,
-__LINE__, " 612.1241",    6.1212410000e+02, 9,
-__LINE__, " 612.1241+",    6.1212410000e+02, 9,
-__LINE__, " 612.1241+1",    6.1212410000e+02, 9,
-__LINE__, " 612.1241+20",    6.1212410000e+02, 9,
-__LINE__, " 612.1241-",    6.1212410000e+02, 9,
-__LINE__, " 612.1241-1",    6.1212410000e+02, 9,
-__LINE__, " 612.1241-20",    6.1212410000e+02, 9,
-__LINE__, " 612.1241e",    6.1212410000e+02, 9,
-__LINE__, " 612.1241e+",    6.1212410000e+02, 9,
-__LINE__, " 612.1241e-",    6.1212410000e+02, 9,
-__LINE__, "+612.1241",    6.1212410000e+02, 9,
-__LINE__, "+612.1241+",    6.1212410000e+02, 9,
-__LINE__, "+612.1241+1",    6.1212410000e+02, 9,
-__LINE__, "+612.1241+20",    6.1212410000e+02, 9,
-__LINE__, "+612.1241-",    6.1212410000e+02, 9,
-__LINE__, "+612.1241-1",    6.1212410000e+02, 9,
-__LINE__, "+612.1241-20",    6.1212410000e+02, 9,
-__LINE__, "+612.1241e",    6.1212410000e+02, 9,
-__LINE__, "+612.1241e+",    6.1212410000e+02, 9,
-__LINE__, "+612.1241e-",    6.1212410000e+02, 9,
-__LINE__, "612.1241",    6.1212410000e+02, 8,
-__LINE__, "612.1241+",    6.1212410000e+02, 8,
-__LINE__, "612.1241+1",    6.1212410000e+02, 8,
-__LINE__, "612.1241+20",    6.1212410000e+02, 8,
-__LINE__, "612.1241-",    6.1212410000e+02, 8,
-__LINE__, "612.1241-1",    6.1212410000e+02, 8,
-__LINE__, "612.1241-20",    6.1212410000e+02, 8,
-__LINE__, "612.1241e",    6.1212410000e+02, 8,
-__LINE__, "612.1241e+",    6.1212410000e+02, 8,
-__LINE__, "612.1241e-",    6.1212410000e+02, 8,
-__LINE__, " +6121241",    6.1212410000e+06, 9,
-__LINE__, " +6121241+",    6.1212410000e+06, 9,
-__LINE__, " +6121241+1",    6.1212410000e+06, 9,
-__LINE__, " +6121241+20",    6.1212410000e+06, 9,
-__LINE__, " +6121241-",    6.1212410000e+06, 9,
-__LINE__, " +6121241-1",    6.1212410000e+06, 9,
-__LINE__, " +6121241-20",    6.1212410000e+06, 9,
-__LINE__, " +6121241e",    6.1212410000e+06, 9,
-__LINE__, " +6121241e+",    6.1212410000e+06, 9,
-__LINE__, " +6121241e-",    6.1212410000e+06, 9,
-__LINE__, " 6121241",    6.1212410000e+06, 8,
-__LINE__, " 6121241+",    6.1212410000e+06, 8,
-__LINE__, " 6121241+1",    6.1212410000e+06, 8,
-__LINE__, " 6121241+20",    6.1212410000e+06, 8,
-__LINE__, " 6121241-",    6.1212410000e+06, 8,
-__LINE__, " 6121241-1",    6.1212410000e+06, 8,
-__LINE__, " 6121241-20",    6.1212410000e+06, 8,
-__LINE__, " 6121241e",    6.1212410000e+06, 8,
-__LINE__, " 6121241e+",    6.1212410000e+06, 8,
-__LINE__, " 6121241e-",    6.1212410000e+06, 8,
-__LINE__, "+6121241",    6.1212410000e+06, 8,
-__LINE__, "+6121241+",    6.1212410000e+06, 8,
-__LINE__, "+6121241+1",    6.1212410000e+06, 8,
-__LINE__, "+6121241+20",    6.1212410000e+06, 8,
-__LINE__, "+6121241-",    6.1212410000e+06, 8,
-__LINE__, "+6121241-1",    6.1212410000e+06, 8,
-__LINE__, "+6121241-20",    6.1212410000e+06, 8,
-__LINE__, "+6121241e",    6.1212410000e+06, 8,
-__LINE__, "+6121241e+",    6.1212410000e+06, 8,
-__LINE__, "+6121241e-",    6.1212410000e+06, 8,
-__LINE__, "6121241",    6.1212410000e+06, 7,
-__LINE__, "6121241+",    6.1212410000e+06, 7,
-__LINE__, "6121241+1",    6.1212410000e+06, 7,
-__LINE__, "6121241+20",    6.1212410000e+06, 7,
-__LINE__, "6121241-",    6.1212410000e+06, 7,
-__LINE__, "6121241-1",    6.1212410000e+06, 7,
-__LINE__, "6121241-20",    6.1212410000e+06, 7,
-__LINE__, "6121241e",    6.1212410000e+06, 7,
-__LINE__, "6121241e+",    6.1212410000e+06, 7,
-__LINE__, "6121241e-",    6.1212410000e+06, 7,
-__LINE__, " +612.1241e+20",    6.1212410000e+22, 14,
-__LINE__, " +612.1241e20",    6.1212410000e+22, 13,
-__LINE__, " 612.1241e+20",    6.1212410000e+22, 13,
-__LINE__, " 612.1241e20",    6.1212410000e+22, 12,
-__LINE__, "+612.1241e+20",    6.1212410000e+22, 13,
-__LINE__, "+612.1241e20",    6.1212410000e+22, 12,
-__LINE__, "612.1241e+20",    6.1212410000e+22, 12,
-__LINE__, "612.1241e20",    6.1212410000e+22, 11,
-__LINE__, " +6121241e+20",    6.1212410000e+26, 13,
-__LINE__, " +6121241e20",    6.1212410000e+26, 12,
-__LINE__, " 6121241e+20",    6.1212410000e+26, 12,
-__LINE__, " 6121241e20",    6.1212410000e+26, 11,
-__LINE__, "+6121241e+20",    6.1212410000e+26, 12,
-__LINE__, "+6121241e20",    6.1212410000e+26, 11,
-__LINE__, "6121241e+20",    6.1212410000e+26, 11,
-__LINE__, "6121241e20",    6.1212410000e+26, 10,
-__LINE__, " +612.1241e-20",    6.1212410000e-18, 14,
-__LINE__, " 612.1241e-20",    6.1212410000e-18, 13,
-__LINE__, "+612.1241e-20",    6.1212410000e-18, 13,
-__LINE__, "612.1241e-20",    6.1212410000e-18, 12,
-__LINE__, " +612.12411",    6.1212411000e+02, 11,
-__LINE__, " 612.12411",    6.1212411000e+02, 10,
-__LINE__, "+612.12411",    6.1212411000e+02, 10,
-__LINE__, "612.12411",    6.1212411000e+02, 9,
-__LINE__, " +61212411",    6.1212411000e+07, 10,
-__LINE__, " 61212411",    6.1212411000e+07, 9,
-__LINE__, "+61212411",    6.1212411000e+07, 9,
-__LINE__, "61212411",    6.1212411000e+07, 8,
-__LINE__, " +612.124120",    6.1212412000e+02, 12,
-__LINE__, " 612.124120",    6.1212412000e+02, 11,
-__LINE__, "+612.124120",    6.1212412000e+02, 11,
-__LINE__, "612.124120",    6.1212412000e+02, 10,
-__LINE__, " +612124120",    6.1212412000e+08, 11,
-__LINE__, " 612124120",    6.1212412000e+08, 10,
-__LINE__, "+612124120",    6.1212412000e+08, 10,
-__LINE__, "612124120",    6.1212412000e+08, 9,
-__LINE__, " +61220",    6.1220000000e+04, 7,
-__LINE__, " 61220",    6.1220000000e+04, 6,
-__LINE__, "+61220",    6.1220000000e+04, 6,
-__LINE__, "61220",    6.1220000000e+04, 5,
-__LINE__, " +612.20",    6.1220000000e+02, 8,
-__LINE__, " 612.20",    6.1220000000e+02, 7,
-__LINE__, "+612.20",    6.1220000000e+02, 7,
-__LINE__, "612.20",    6.1220000000e+02, 6,
-__LINE__, " +612.8",    6.1280000000e+02, 7,
-__LINE__, " +612.8+",    6.1280000000e+02, 7,
-__LINE__, " +612.8+1",    6.1280000000e+02, 7,
-__LINE__, " +612.8+20",    6.1280000000e+02, 7,
-__LINE__, " +612.8-",    6.1280000000e+02, 7,
-__LINE__, " +612.8-1",    6.1280000000e+02, 7,
-__LINE__, " +612.8-20",    6.1280000000e+02, 7,
-__LINE__, " +612.8e",    6.1280000000e+02, 7,
-__LINE__, " +612.8e+",    6.1280000000e+02, 7,
-__LINE__, " +612.8e-",    6.1280000000e+02, 7,
-__LINE__, " +6128e-1",    6.1280000000e+02, 9,
-__LINE__, " 612.8",    6.1280000000e+02, 6,
-__LINE__, " 612.8+",    6.1280000000e+02, 6,
-__LINE__, " 612.8+1",    6.1280000000e+02, 6,
-__LINE__, " 612.8+20",    6.1280000000e+02, 6,
-__LINE__, " 612.8-",    6.1280000000e+02, 6,
-__LINE__, " 612.8-1",    6.1280000000e+02, 6,
-__LINE__, " 612.8-20",    6.1280000000e+02, 6,
-__LINE__, " 612.8e",    6.1280000000e+02, 6,
-__LINE__, " 612.8e+",    6.1280000000e+02, 6,
-__LINE__, " 612.8e-",    6.1280000000e+02, 6,
-__LINE__, " 6128e-1",    6.1280000000e+02, 8,
-__LINE__, "+612.8",    6.1280000000e+02, 6,
-__LINE__, "+612.8+",    6.1280000000e+02, 6,
-__LINE__, "+612.8+1",    6.1280000000e+02, 6,
-__LINE__, "+612.8+20",    6.1280000000e+02, 6,
-__LINE__, "+612.8-",    6.1280000000e+02, 6,
-__LINE__, "+612.8-1",    6.1280000000e+02, 6,
-__LINE__, "+612.8-20",    6.1280000000e+02, 6,
-__LINE__, "+612.8e",    6.1280000000e+02, 6,
-__LINE__, "+612.8e+",    6.1280000000e+02, 6,
-__LINE__, "+612.8e-",    6.1280000000e+02, 6,
-__LINE__, "+6128e-1",    6.1280000000e+02, 8,
-__LINE__, "612.8",    6.1280000000e+02, 5,
-__LINE__, "612.8+",    6.1280000000e+02, 5,
-__LINE__, "612.8+1",    6.1280000000e+02, 5,
-__LINE__, "612.8+20",    6.1280000000e+02, 5,
-__LINE__, "612.8-",    6.1280000000e+02, 5,
-__LINE__, "612.8-1",    6.1280000000e+02, 5,
-__LINE__, "612.8-20",    6.1280000000e+02, 5,
-__LINE__, "612.8e",    6.1280000000e+02, 5,
-__LINE__, "612.8e+",    6.1280000000e+02, 5,
-__LINE__, "612.8e-",    6.1280000000e+02, 5,
-__LINE__, "6128e-1",    6.1280000000e+02, 7,
-__LINE__, " +612.8e+20",    6.1280000000e+22, 11,
-__LINE__, " +612.8e20",    6.1280000000e+22, 10,
-__LINE__, " 612.8e+20",    6.1280000000e+22, 10,
-__LINE__, " 612.8e20",    6.1280000000e+22, 9,
-__LINE__, "+612.8e+20",    6.1280000000e+22, 10,
-__LINE__, "+612.8e20",    6.1280000000e+22, 9,
-__LINE__, "612.8e+20",    6.1280000000e+22, 9,
-__LINE__, "612.8e20",    6.1280000000e+22, 8,
-__LINE__, " +6128e-20",    6.1280000000e-17, 10,
-__LINE__, " 6128e-20",    6.1280000000e-17, 9,
-__LINE__, "+6128e-20",    6.1280000000e-17, 9,
-__LINE__, "6128e-20",    6.1280000000e-17, 8,
-__LINE__, " +612.8e-1",    6.1280000000e+01, 10,
-__LINE__, " 612.8e-1",    6.1280000000e+01, 9,
-__LINE__, "+612.8e-1",    6.1280000000e+01, 9,
-__LINE__, "612.8e-1",    6.1280000000e+01, 8,
-__LINE__, " +612.8e+1",    6.1280000000e+03, 10,
-__LINE__, " +612.8e1",    6.1280000000e+03, 9,
-__LINE__, " +6128",    6.1280000000e+03, 6,
-__LINE__, " +6128+",    6.1280000000e+03, 6,
-__LINE__, " +6128+1",    6.1280000000e+03, 6,
-__LINE__, " +6128+20",    6.1280000000e+03, 6,
-__LINE__, " +6128-",    6.1280000000e+03, 6,
-__LINE__, " +6128-1",    6.1280000000e+03, 6,
-__LINE__, " +6128-20",    6.1280000000e+03, 6,
-__LINE__, " +6128e",    6.1280000000e+03, 6,
-__LINE__, " +6128e+",    6.1280000000e+03, 6,
-__LINE__, " +6128e-",    6.1280000000e+03, 6,
-__LINE__, " 612.8e+1",    6.1280000000e+03, 9,
-__LINE__, " 612.8e1",    6.1280000000e+03, 8,
-__LINE__, " 6128",    6.1280000000e+03, 5,
-__LINE__, " 6128+",    6.1280000000e+03, 5,
-__LINE__, " 6128+1",    6.1280000000e+03, 5,
-__LINE__, " 6128+20",    6.1280000000e+03, 5,
-__LINE__, " 6128-",    6.1280000000e+03, 5,
-__LINE__, " 6128-1",    6.1280000000e+03, 5,
-__LINE__, " 6128-20",    6.1280000000e+03, 5,
-__LINE__, " 6128e",    6.1280000000e+03, 5,
-__LINE__, " 6128e+",    6.1280000000e+03, 5,
-__LINE__, " 6128e-",    6.1280000000e+03, 5,
-__LINE__, "+612.8e+1",    6.1280000000e+03, 9,
-__LINE__, "+612.8e1",    6.1280000000e+03, 8,
-__LINE__, "+6128",    6.1280000000e+03, 5,
-__LINE__, "+6128+",    6.1280000000e+03, 5,
-__LINE__, "+6128+1",    6.1280000000e+03, 5,
-__LINE__, "+6128+20",    6.1280000000e+03, 5,
-__LINE__, "+6128-",    6.1280000000e+03, 5,
-__LINE__, "+6128-1",    6.1280000000e+03, 5,
-__LINE__, "+6128-20",    6.1280000000e+03, 5,
-__LINE__, "+6128e",    6.1280000000e+03, 5,
-__LINE__, "+6128e+",    6.1280000000e+03, 5,
-__LINE__, "+6128e-",    6.1280000000e+03, 5,
-__LINE__, "612.8e+1",    6.1280000000e+03, 8,
-__LINE__, "612.8e1",    6.1280000000e+03, 7,
-__LINE__, "6128",    6.1280000000e+03, 4,
-__LINE__, "6128+",    6.1280000000e+03, 4,
-__LINE__, "6128+1",    6.1280000000e+03, 4,
-__LINE__, "6128+20",    6.1280000000e+03, 4,
-__LINE__, "6128-",    6.1280000000e+03, 4,
-__LINE__, "6128-1",    6.1280000000e+03, 4,
-__LINE__, "6128-20",    6.1280000000e+03, 4,
-__LINE__, "6128e",    6.1280000000e+03, 4,
-__LINE__, "6128e+",    6.1280000000e+03, 4,
-__LINE__, "6128e-",    6.1280000000e+03, 4,
-__LINE__, " +6128e+1",    6.1280000000e+04, 9,
-__LINE__, " +6128e1",    6.1280000000e+04, 8,
-__LINE__, " 6128e+1",    6.1280000000e+04, 8,
-__LINE__, " 6128e1",    6.1280000000e+04, 7,
-__LINE__, "+6128e+1",    6.1280000000e+04, 8,
-__LINE__, "+6128e1",    6.1280000000e+04, 7,
-__LINE__, "6128e+1",    6.1280000000e+04, 7,
-__LINE__, "6128e1",    6.1280000000e+04, 6,
-__LINE__, " +6128e+20",    6.1280000000e+23, 10,
-__LINE__, " +6128e20",    6.1280000000e+23, 9,
-__LINE__, " 6128e+20",    6.1280000000e+23, 9,
-__LINE__, " 6128e20",    6.1280000000e+23, 8,
-__LINE__, "+6128e+20",    6.1280000000e+23, 9,
-__LINE__, "+6128e20",    6.1280000000e+23, 8,
-__LINE__, "6128e+20",    6.1280000000e+23, 8,
-__LINE__, "6128e20",    6.1280000000e+23, 7,
-__LINE__, " +612.8e-20",    6.1280000000e-18, 11,
-__LINE__, " 612.8e-20",    6.1280000000e-18, 10,
-__LINE__, "+612.8e-20",    6.1280000000e-18, 10,
-__LINE__, "612.8e-20",    6.1280000000e-18, 9,
-__LINE__, " +612.81",    6.1281000000e+02, 8,
-__LINE__, " 612.81",    6.1281000000e+02, 7,
-__LINE__, "+612.81",    6.1281000000e+02, 7,
-__LINE__, "612.81",    6.1281000000e+02, 6,
-__LINE__, " +61281",    6.1281000000e+04, 7,
-__LINE__, " 61281",    6.1281000000e+04, 6,
-__LINE__, "+61281",    6.1281000000e+04, 6,
-__LINE__, "61281",    6.1281000000e+04, 5,
-__LINE__, " +612820",    6.1282000000e+05, 8,
-__LINE__, " 612820",    6.1282000000e+05, 7,
-__LINE__, "+612820",    6.1282000000e+05, 7,
-__LINE__, "612820",    6.1282000000e+05, 6,
-__LINE__, " +612.820",    6.1282000000e+02, 9,
-__LINE__, " 612.820",    6.1282000000e+02, 8,
-__LINE__, "+612.820",    6.1282000000e+02, 8,
-__LINE__, "612.820",    6.1282000000e+02, 7,
-__LINE__, " +612.9e-1",    6.1290000000e+01, 10,
-__LINE__, " 612.9e-1",    6.1290000000e+01, 9,
-__LINE__, "+612.9e-1",    6.1290000000e+01, 9,
-__LINE__, "612.9e-1",    6.1290000000e+01, 8,
-__LINE__, " +612.9",    6.1290000000e+02, 7,
-__LINE__, " +612.9+",    6.1290000000e+02, 7,
-__LINE__, " +612.9+1",    6.1290000000e+02, 7,
-__LINE__, " +612.9+20",    6.1290000000e+02, 7,
-__LINE__, " +612.9-",    6.1290000000e+02, 7,
-__LINE__, " +612.9-1",    6.1290000000e+02, 7,
-__LINE__, " +612.9-20",    6.1290000000e+02, 7,
-__LINE__, " +612.9e",    6.1290000000e+02, 7,
-__LINE__, " +612.9e+",    6.1290000000e+02, 7,
-__LINE__, " +612.9e-",    6.1290000000e+02, 7,
-__LINE__, " +6129e-1",    6.1290000000e+02, 9,
-__LINE__, " 612.9",    6.1290000000e+02, 6,
-__LINE__, " 612.9+",    6.1290000000e+02, 6,
-__LINE__, " 612.9+1",    6.1290000000e+02, 6,
-__LINE__, " 612.9+20",    6.1290000000e+02, 6,
-__LINE__, " 612.9-",    6.1290000000e+02, 6,
-__LINE__, " 612.9-1",    6.1290000000e+02, 6,
-__LINE__, " 612.9-20",    6.1290000000e+02, 6,
-__LINE__, " 612.9e",    6.1290000000e+02, 6,
-__LINE__, " 612.9e+",    6.1290000000e+02, 6,
-__LINE__, " 612.9e-",    6.1290000000e+02, 6,
-__LINE__, " 6129e-1",    6.1290000000e+02, 8,
-__LINE__, "+612.9",    6.1290000000e+02, 6,
-__LINE__, "+612.9+",    6.1290000000e+02, 6,
-__LINE__, "+612.9+1",    6.1290000000e+02, 6,
-__LINE__, "+612.9+20",    6.1290000000e+02, 6,
-__LINE__, "+612.9-",    6.1290000000e+02, 6,
-__LINE__, "+612.9-1",    6.1290000000e+02, 6,
-__LINE__, "+612.9-20",    6.1290000000e+02, 6,
-__LINE__, "+612.9e",    6.1290000000e+02, 6,
-__LINE__, "+612.9e+",    6.1290000000e+02, 6,
-__LINE__, "+612.9e-",    6.1290000000e+02, 6,
-__LINE__, "+6129e-1",    6.1290000000e+02, 8,
-__LINE__, "612.9",    6.1290000000e+02, 5,
-__LINE__, "612.9+",    6.1290000000e+02, 5,
-__LINE__, "612.9+1",    6.1290000000e+02, 5,
-__LINE__, "612.9+20",    6.1290000000e+02, 5,
-__LINE__, "612.9-",    6.1290000000e+02, 5,
-__LINE__, "612.9-1",    6.1290000000e+02, 5,
-__LINE__, "612.9-20",    6.1290000000e+02, 5,
-__LINE__, "612.9e",    6.1290000000e+02, 5,
-__LINE__, "612.9e+",    6.1290000000e+02, 5,
-__LINE__, "612.9e-",    6.1290000000e+02, 5,
-__LINE__, "6129e-1",    6.1290000000e+02, 7,
-__LINE__, " +612.9e+1",    6.1290000000e+03, 10,
-__LINE__, " +612.9e1",    6.1290000000e+03, 9,
-__LINE__, " +6129",    6.1290000000e+03, 6,
-__LINE__, " +6129+",    6.1290000000e+03, 6,
-__LINE__, " +6129+1",    6.1290000000e+03, 6,
-__LINE__, " +6129+20",    6.1290000000e+03, 6,
-__LINE__, " +6129-",    6.1290000000e+03, 6,
-__LINE__, " +6129-1",    6.1290000000e+03, 6,
-__LINE__, " +6129-20",    6.1290000000e+03, 6,
-__LINE__, " +6129e",    6.1290000000e+03, 6,
-__LINE__, " +6129e+",    6.1290000000e+03, 6,
-__LINE__, " +6129e-",    6.1290000000e+03, 6,
-__LINE__, " 612.9e+1",    6.1290000000e+03, 9,
-__LINE__, " 612.9e1",    6.1290000000e+03, 8,
-__LINE__, " 6129",    6.1290000000e+03, 5,
-__LINE__, " 6129+",    6.1290000000e+03, 5,
-__LINE__, " 6129+1",    6.1290000000e+03, 5,
-__LINE__, " 6129+20",    6.1290000000e+03, 5,
-__LINE__, " 6129-",    6.1290000000e+03, 5,
-__LINE__, " 6129-1",    6.1290000000e+03, 5,
-__LINE__, " 6129-20",    6.1290000000e+03, 5,
-__LINE__, " 6129e",    6.1290000000e+03, 5,
-__LINE__, " 6129e+",    6.1290000000e+03, 5,
-__LINE__, " 6129e-",    6.1290000000e+03, 5,
-__LINE__, "+612.9e+1",    6.1290000000e+03, 9,
-__LINE__, "+612.9e1",    6.1290000000e+03, 8,
-__LINE__, "+6129",    6.1290000000e+03, 5,
-__LINE__, "+6129+",    6.1290000000e+03, 5,
-__LINE__, "+6129+1",    6.1290000000e+03, 5,
-__LINE__, "+6129+20",    6.1290000000e+03, 5,
-__LINE__, "+6129-",    6.1290000000e+03, 5,
-__LINE__, "+6129-1",    6.1290000000e+03, 5,
-__LINE__, "+6129-20",    6.1290000000e+03, 5,
-__LINE__, "+6129e",    6.1290000000e+03, 5,
-__LINE__, "+6129e+",    6.1290000000e+03, 5,
-__LINE__, "+6129e-",    6.1290000000e+03, 5,
-__LINE__, "612.9e+1",    6.1290000000e+03, 8,
-__LINE__, "612.9e1",    6.1290000000e+03, 7,
-__LINE__, "6129",    6.1290000000e+03, 4,
-__LINE__, "6129+",    6.1290000000e+03, 4,
-__LINE__, "6129+1",    6.1290000000e+03, 4,
-__LINE__, "6129+20",    6.1290000000e+03, 4,
-__LINE__, "6129-",    6.1290000000e+03, 4,
-__LINE__, "6129-1",    6.1290000000e+03, 4,
-__LINE__, "6129-20",    6.1290000000e+03, 4,
-__LINE__, "6129e",    6.1290000000e+03, 4,
-__LINE__, "6129e+",    6.1290000000e+03, 4,
-__LINE__, "6129e-",    6.1290000000e+03, 4,
-__LINE__, " +6129e+1",    6.1290000000e+04, 9,
-__LINE__, " +6129e1",    6.1290000000e+04, 8,
-__LINE__, " 6129e+1",    6.1290000000e+04, 8,
-__LINE__, " 6129e1",    6.1290000000e+04, 7,
-__LINE__, "+6129e+1",    6.1290000000e+04, 8,
-__LINE__, "+6129e1",    6.1290000000e+04, 7,
-__LINE__, "6129e+1",    6.1290000000e+04, 7,
-__LINE__, "6129e1",    6.1290000000e+04, 6,
-__LINE__, " +612.9e+20",    6.1290000000e+22, 11,
-__LINE__, " +612.9e20",    6.1290000000e+22, 10,
-__LINE__, " 612.9e+20",    6.1290000000e+22, 10,
-__LINE__, " 612.9e20",    6.1290000000e+22, 9,
-__LINE__, "+612.9e+20",    6.1290000000e+22, 10,
-__LINE__, "+612.9e20",    6.1290000000e+22, 9,
-__LINE__, "612.9e+20",    6.1290000000e+22, 9,
-__LINE__, "612.9e20",    6.1290000000e+22, 8,
-__LINE__, " +6129e+20",    6.1290000000e+23, 10,
-__LINE__, " +6129e20",    6.1290000000e+23, 9,
-__LINE__, " 6129e+20",    6.1290000000e+23, 9,
-__LINE__, " 6129e20",    6.1290000000e+23, 8,
-__LINE__, "+6129e+20",    6.1290000000e+23, 9,
-__LINE__, "+6129e20",    6.1290000000e+23, 8,
-__LINE__, "6129e+20",    6.1290000000e+23, 8,
-__LINE__, "6129e20",    6.1290000000e+23, 7,
-__LINE__, " +612.9e-20",    6.1290000000e-18, 11,
-__LINE__, " 612.9e-20",    6.1290000000e-18, 10,
-__LINE__, "+612.9e-20",    6.1290000000e-18, 10,
-__LINE__, "612.9e-20",    6.1290000000e-18, 9,
-__LINE__, " +6129e-20",    6.1290000000e-17, 10,
-__LINE__, " 6129e-20",    6.1290000000e-17, 9,
-__LINE__, "+6129e-20",    6.1290000000e-17, 9,
-__LINE__, "6129e-20",    6.1290000000e-17, 8,
-__LINE__, " +612.91",    6.1291000000e+02, 8,
-__LINE__, " 612.91",    6.1291000000e+02, 7,
-__LINE__, "+612.91",    6.1291000000e+02, 7,
-__LINE__, "612.91",    6.1291000000e+02, 6,
-__LINE__, " +61291",    6.1291000000e+04, 7,
-__LINE__, " 61291",    6.1291000000e+04, 6,
-__LINE__, "+61291",    6.1291000000e+04, 6,
-__LINE__, "61291",    6.1291000000e+04, 5,
-__LINE__, " +612.920",    6.1292000000e+02, 9,
-__LINE__, " 612.920",    6.1292000000e+02, 8,
-__LINE__, "+612.920",    6.1292000000e+02, 8,
-__LINE__, "612.920",    6.1292000000e+02, 7,
-__LINE__, " +612920",    6.1292000000e+05, 8,
-__LINE__, " 612920",    6.1292000000e+05, 7,
-__LINE__, "+612920",    6.1292000000e+05, 7,
-__LINE__, "612920",    6.1292000000e+05, 6,
-__LINE__, " +08e-20",    8.0000000000e-20, 8,
-__LINE__, " +8e-20",    8.0000000000e-20, 7,
-__LINE__, " 08e-20",    8.0000000000e-20, 7,
-__LINE__, " 8e-20",    8.0000000000e-20, 6,
-__LINE__, "+08e-20",    8.0000000000e-20, 7,
-__LINE__, "+8e-20",    8.0000000000e-20, 6,
-__LINE__, "08e-20",    8.0000000000e-20, 6,
-__LINE__, "8e-20",    8.0000000000e-20, 5,
-__LINE__, " +.8e-20",    8.0000000000e-21, 8,
-__LINE__, " +0.8e-20",    8.0000000000e-21, 9,
-__LINE__, " .8e-20",    8.0000000000e-21, 7,
-__LINE__, " 0.8e-20",    8.0000000000e-21, 8,
-__LINE__, "+.8e-20",    8.0000000000e-21, 7,
-__LINE__, "+0.8e-20",    8.0000000000e-21, 8,
-__LINE__, ".8e-20",    8.0000000000e-21, 6,
-__LINE__, "0.8e-20",    8.0000000000e-21, 7,
-__LINE__, " +.8e+1",    8.0000000000e+00, 7,
-__LINE__, " +.8e1",    8.0000000000e+00, 6,
-__LINE__, " +0.8e+1",    8.0000000000e+00, 8,
-__LINE__, " +0.8e1",    8.0000000000e+00, 7,
-__LINE__, " +08",    8.0000000000e+00, 4,
-__LINE__, " +08+",    8.0000000000e+00, 4,
-__LINE__, " +08+1",    8.0000000000e+00, 4,
-__LINE__, " +08+20",    8.0000000000e+00, 4,
-__LINE__, " +08-",    8.0000000000e+00, 4,
-__LINE__, " +08-1",    8.0000000000e+00, 4,
-__LINE__, " +08-20",    8.0000000000e+00, 4,
-__LINE__, " +08e",    8.0000000000e+00, 4,
-__LINE__, " +08e+",    8.0000000000e+00, 4,
-__LINE__, " +08e-",    8.0000000000e+00, 4,
-__LINE__, " +8",    8.0000000000e+00, 3,
-__LINE__, " +8+",    8.0000000000e+00, 3,
-__LINE__, " +8+1",    8.0000000000e+00, 3,
-__LINE__, " +8+20",    8.0000000000e+00, 3,
-__LINE__, " +8-",    8.0000000000e+00, 3,
-__LINE__, " +8-1",    8.0000000000e+00, 3,
-__LINE__, " +8-20",    8.0000000000e+00, 3,
-__LINE__, " +8e",    8.0000000000e+00, 3,
-__LINE__, " +8e+",    8.0000000000e+00, 3,
-__LINE__, " +8e-",    8.0000000000e+00, 3,
-__LINE__, " .8e+1",    8.0000000000e+00, 6,
-__LINE__, " .8e1",    8.0000000000e+00, 5,
-__LINE__, " 0.8e+1",    8.0000000000e+00, 7,
-__LINE__, " 0.8e1",    8.0000000000e+00, 6,
-__LINE__, " 08",    8.0000000000e+00, 3,
-__LINE__, " 08+",    8.0000000000e+00, 3,
-__LINE__, " 08+1",    8.0000000000e+00, 3,
-__LINE__, " 08+20",    8.0000000000e+00, 3,
-__LINE__, " 08-",    8.0000000000e+00, 3,
-__LINE__, " 08-1",    8.0000000000e+00, 3,
-__LINE__, " 08-20",    8.0000000000e+00, 3,
-__LINE__, " 08e",    8.0000000000e+00, 3,
-__LINE__, " 08e+",    8.0000000000e+00, 3,
-__LINE__, " 08e-",    8.0000000000e+00, 3,
-__LINE__, " 8",    8.0000000000e+00, 2,
-__LINE__, " 8+",    8.0000000000e+00, 2,
-__LINE__, " 8+1",    8.0000000000e+00, 2,
-__LINE__, " 8+20",    8.0000000000e+00, 2,
-__LINE__, " 8-",    8.0000000000e+00, 2,
-__LINE__, " 8-1",    8.0000000000e+00, 2,
-__LINE__, " 8-20",    8.0000000000e+00, 2,
-__LINE__, " 8e",    8.0000000000e+00, 2,
-__LINE__, " 8e+",    8.0000000000e+00, 2,
-__LINE__, " 8e-",    8.0000000000e+00, 2,
-__LINE__, "+.8e+1",    8.0000000000e+00, 6,
-__LINE__, "+.8e1",    8.0000000000e+00, 5,
-__LINE__, "+0.8e+1",    8.0000000000e+00, 7,
-__LINE__, "+0.8e1",    8.0000000000e+00, 6,
-__LINE__, "+08",    8.0000000000e+00, 3,
-__LINE__, "+08+",    8.0000000000e+00, 3,
-__LINE__, "+08+1",    8.0000000000e+00, 3,
-__LINE__, "+08+20",    8.0000000000e+00, 3,
-__LINE__, "+08-",    8.0000000000e+00, 3,
-__LINE__, "+08-1",    8.0000000000e+00, 3,
-__LINE__, "+08-20",    8.0000000000e+00, 3,
-__LINE__, "+08e",    8.0000000000e+00, 3,
-__LINE__, "+08e+",    8.0000000000e+00, 3,
-__LINE__, "+08e-",    8.0000000000e+00, 3,
-__LINE__, "+8",    8.0000000000e+00, 2,
-__LINE__, "+8+",    8.0000000000e+00, 2,
-__LINE__, "+8+1",    8.0000000000e+00, 2,
-__LINE__, "+8+20",    8.0000000000e+00, 2,
-__LINE__, "+8-",    8.0000000000e+00, 2,
-__LINE__, "+8-1",    8.0000000000e+00, 2,
-__LINE__, "+8-20",    8.0000000000e+00, 2,
-__LINE__, "+8e",    8.0000000000e+00, 2,
-__LINE__, "+8e+",    8.0000000000e+00, 2,
-__LINE__, "+8e-",    8.0000000000e+00, 2,
-__LINE__, ".8e+1",    8.0000000000e+00, 5,
-__LINE__, ".8e1",    8.0000000000e+00, 4,
-__LINE__, "0.8e+1",    8.0000000000e+00, 6,
-__LINE__, "0.8e1",    8.0000000000e+00, 5,
-__LINE__, "08",    8.0000000000e+00, 2,
-__LINE__, "08+",    8.0000000000e+00, 2,
-__LINE__, "08+1",    8.0000000000e+00, 2,
-__LINE__, "08+20",    8.0000000000e+00, 2,
-__LINE__, "08-",    8.0000000000e+00, 2,
-__LINE__, "08-1",    8.0000000000e+00, 2,
-__LINE__, "08-20",    8.0000000000e+00, 2,
-__LINE__, "08e",    8.0000000000e+00, 2,
-__LINE__, "08e+",    8.0000000000e+00, 2,
-__LINE__, "08e-",    8.0000000000e+00, 2,
-__LINE__, "8",    8.0000000000e+00, 1,
-__LINE__, "8+",    8.0000000000e+00, 1,
-__LINE__, "8+1",    8.0000000000e+00, 1,
-__LINE__, "8+20",    8.0000000000e+00, 1,
-__LINE__, "8-",    8.0000000000e+00, 1,
-__LINE__, "8-1",    8.0000000000e+00, 1,
-__LINE__, "8-20",    8.0000000000e+00, 1,
-__LINE__, "8e",    8.0000000000e+00, 1,
-__LINE__, "8e+",    8.0000000000e+00, 1,
-__LINE__, "8e-",    8.0000000000e+00, 1,
-__LINE__, " +08e+1",    8.0000000000e+01, 7,
-__LINE__, " +08e1",    8.0000000000e+01, 6,
-__LINE__, " +8e+1",    8.0000000000e+01, 6,
-__LINE__, " +8e1",    8.0000000000e+01, 5,
-__LINE__, " 08e+1",    8.0000000000e+01, 6,
-__LINE__, " 08e1",    8.0000000000e+01, 5,
-__LINE__, " 8e+1",    8.0000000000e+01, 5,
-__LINE__, " 8e1",    8.0000000000e+01, 4,
-__LINE__, "+08e+1",    8.0000000000e+01, 6,
-__LINE__, "+08e1",    8.0000000000e+01, 5,
-__LINE__, "+8e+1",    8.0000000000e+01, 5,
-__LINE__, "+8e1",    8.0000000000e+01, 4,
-__LINE__, "08e+1",    8.0000000000e+01, 5,
-__LINE__, "08e1",    8.0000000000e+01, 4,
-__LINE__, "8e+1",    8.0000000000e+01, 4,
-__LINE__, "8e1",    8.0000000000e+01, 3,
-__LINE__, " +.8e+20",    8.0000000000e+19, 8,
-__LINE__, " +.8e20",    8.0000000000e+19, 7,
-__LINE__, " +0.8e+20",    8.0000000000e+19, 9,
-__LINE__, " +0.8e20",    8.0000000000e+19, 8,
-__LINE__, " .8e+20",    8.0000000000e+19, 7,
-__LINE__, " .8e20",    8.0000000000e+19, 6,
-__LINE__, " 0.8e+20",    8.0000000000e+19, 8,
-__LINE__, " 0.8e20",    8.0000000000e+19, 7,
-__LINE__, "+.8e+20",    8.0000000000e+19, 7,
-__LINE__, "+.8e20",    8.0000000000e+19, 6,
-__LINE__, "+0.8e+20",    8.0000000000e+19, 8,
-__LINE__, "+0.8e20",    8.0000000000e+19, 7,
-__LINE__, ".8e+20",    8.0000000000e+19, 6,
-__LINE__, ".8e20",    8.0000000000e+19, 5,
-__LINE__, "0.8e+20",    8.0000000000e+19, 7,
-__LINE__, "0.8e20",    8.0000000000e+19, 6,
-__LINE__, " +08e+20",    8.0000000000e+20, 8,
-__LINE__, " +08e20",    8.0000000000e+20, 7,
-__LINE__, " +8e+20",    8.0000000000e+20, 7,
-__LINE__, " +8e20",    8.0000000000e+20, 6,
-__LINE__, " 08e+20",    8.0000000000e+20, 7,
-__LINE__, " 08e20",    8.0000000000e+20, 6,
-__LINE__, " 8e+20",    8.0000000000e+20, 6,
-__LINE__, " 8e20",    8.0000000000e+20, 5,
-__LINE__, "+08e+20",    8.0000000000e+20, 7,
-__LINE__, "+08e20",    8.0000000000e+20, 6,
-__LINE__, "+8e+20",    8.0000000000e+20, 6,
-__LINE__, "+8e20",    8.0000000000e+20, 5,
-__LINE__, "08e+20",    8.0000000000e+20, 6,
-__LINE__, "08e20",    8.0000000000e+20, 5,
-__LINE__, "8e+20",    8.0000000000e+20, 5,
-__LINE__, "8e20",    8.0000000000e+20, 4,
-__LINE__, " +.8",    8.0000000000e-01, 4,
-__LINE__, " +.8+",    8.0000000000e-01, 4,
-__LINE__, " +.8+1",    8.0000000000e-01, 4,
-__LINE__, " +.8+20",    8.0000000000e-01, 4,
-__LINE__, " +.8-",    8.0000000000e-01, 4,
-__LINE__, " +.8-1",    8.0000000000e-01, 4,
-__LINE__, " +.8-20",    8.0000000000e-01, 4,
-__LINE__, " +.8e",    8.0000000000e-01, 4,
-__LINE__, " +.8e+",    8.0000000000e-01, 4,
-__LINE__, " +.8e-",    8.0000000000e-01, 4,
-__LINE__, " +0.8",    8.0000000000e-01, 5,
-__LINE__, " +0.8+",    8.0000000000e-01, 5,
-__LINE__, " +0.8+1",    8.0000000000e-01, 5,
-__LINE__, " +0.8+20",    8.0000000000e-01, 5,
-__LINE__, " +0.8-",    8.0000000000e-01, 5,
-__LINE__, " +0.8-1",    8.0000000000e-01, 5,
-__LINE__, " +0.8-20",    8.0000000000e-01, 5,
-__LINE__, " +0.8e",    8.0000000000e-01, 5,
-__LINE__, " +0.8e+",    8.0000000000e-01, 5,
-__LINE__, " +0.8e-",    8.0000000000e-01, 5,
-__LINE__, " +08e-1",    8.0000000000e-01, 7,
-__LINE__, " +8e-1",    8.0000000000e-01, 6,
-__LINE__, " .8",    8.0000000000e-01, 3,
-__LINE__, " .8+",    8.0000000000e-01, 3,
-__LINE__, " .8+1",    8.0000000000e-01, 3,
-__LINE__, " .8+20",    8.0000000000e-01, 3,
-__LINE__, " .8-",    8.0000000000e-01, 3,
-__LINE__, " .8-1",    8.0000000000e-01, 3,
-__LINE__, " .8-20",    8.0000000000e-01, 3,
-__LINE__, " .8e",    8.0000000000e-01, 3,
-__LINE__, " .8e+",    8.0000000000e-01, 3,
-__LINE__, " .8e-",    8.0000000000e-01, 3,
-__LINE__, " 0.8",    8.0000000000e-01, 4,
-__LINE__, " 0.8+",    8.0000000000e-01, 4,
-__LINE__, " 0.8+1",    8.0000000000e-01, 4,
-__LINE__, " 0.8+20",    8.0000000000e-01, 4,
-__LINE__, " 0.8-",    8.0000000000e-01, 4,
-__LINE__, " 0.8-1",    8.0000000000e-01, 4,
-__LINE__, " 0.8-20",    8.0000000000e-01, 4,
-__LINE__, " 0.8e",    8.0000000000e-01, 4,
-__LINE__, " 0.8e+",    8.0000000000e-01, 4,
-__LINE__, " 0.8e-",    8.0000000000e-01, 4,
-__LINE__, " 08e-1",    8.0000000000e-01, 6,
-__LINE__, " 8e-1",    8.0000000000e-01, 5,
-__LINE__, "+.8",    8.0000000000e-01, 3,
-__LINE__, "+.8+",    8.0000000000e-01, 3,
-__LINE__, "+.8+1",    8.0000000000e-01, 3,
-__LINE__, "+.8+20",    8.0000000000e-01, 3,
-__LINE__, "+.8-",    8.0000000000e-01, 3,
-__LINE__, "+.8-1",    8.0000000000e-01, 3,
-__LINE__, "+.8-20",    8.0000000000e-01, 3,
-__LINE__, "+.8e",    8.0000000000e-01, 3,
-__LINE__, "+.8e+",    8.0000000000e-01, 3,
-__LINE__, "+.8e-",    8.0000000000e-01, 3,
-__LINE__, "+0.8",    8.0000000000e-01, 4,
-__LINE__, "+0.8+",    8.0000000000e-01, 4,
-__LINE__, "+0.8+1",    8.0000000000e-01, 4,
-__LINE__, "+0.8+20",    8.0000000000e-01, 4,
-__LINE__, "+0.8-",    8.0000000000e-01, 4,
-__LINE__, "+0.8-1",    8.0000000000e-01, 4,
-__LINE__, "+0.8-20",    8.0000000000e-01, 4,
-__LINE__, "+0.8e",    8.0000000000e-01, 4,
-__LINE__, "+0.8e+",    8.0000000000e-01, 4,
-__LINE__, "+0.8e-",    8.0000000000e-01, 4,
-__LINE__, "+08e-1",    8.0000000000e-01, 6,
-__LINE__, "+8e-1",    8.0000000000e-01, 5,
-__LINE__, ".8",    8.0000000000e-01, 2,
-__LINE__, ".8+",    8.0000000000e-01, 2,
-__LINE__, ".8+1",    8.0000000000e-01, 2,
-__LINE__, ".8+20",    8.0000000000e-01, 2,
-__LINE__, ".8-",    8.0000000000e-01, 2,
-__LINE__, ".8-1",    8.0000000000e-01, 2,
-__LINE__, ".8-20",    8.0000000000e-01, 2,
-__LINE__, ".8e",    8.0000000000e-01, 2,
-__LINE__, ".8e+",    8.0000000000e-01, 2,
-__LINE__, ".8e-",    8.0000000000e-01, 2,
-__LINE__, "0.8",    8.0000000000e-01, 3,
-__LINE__, "0.8+",    8.0000000000e-01, 3,
-__LINE__, "0.8+1",    8.0000000000e-01, 3,
-__LINE__, "0.8+20",    8.0000000000e-01, 3,
-__LINE__, "0.8-",    8.0000000000e-01, 3,
-__LINE__, "0.8-1",    8.0000000000e-01, 3,
-__LINE__, "0.8-20",    8.0000000000e-01, 3,
-__LINE__, "0.8e",    8.0000000000e-01, 3,
-__LINE__, "0.8e+",    8.0000000000e-01, 3,
-__LINE__, "0.8e-",    8.0000000000e-01, 3,
-__LINE__, "08e-1",    8.0000000000e-01, 5,
-__LINE__, "8e-1",    8.0000000000e-01, 4,
-__LINE__, " +.8e-1",    8.0000000000e-02, 7,
-__LINE__, " +0.8e-1",    8.0000000000e-02, 8,
-__LINE__, " .8e-1",    8.0000000000e-02, 6,
-__LINE__, " 0.8e-1",    8.0000000000e-02, 7,
-__LINE__, "+.8e-1",    8.0000000000e-02, 6,
-__LINE__, "+0.8e-1",    8.0000000000e-02, 7,
-__LINE__, ".8e-1",    8.0000000000e-02, 5,
-__LINE__, "0.8e-1",    8.0000000000e-02, 6,
-__LINE__, " +081",    8.1000000000e+01, 5,
-__LINE__, " +81",    8.1000000000e+01, 4,
-__LINE__, " 081",    8.1000000000e+01, 4,
-__LINE__, " 81",    8.1000000000e+01, 3,
-__LINE__, "+081",    8.1000000000e+01, 4,
-__LINE__, "+81",    8.1000000000e+01, 3,
-__LINE__, "081",    8.1000000000e+01, 3,
-__LINE__, "81",    8.1000000000e+01, 2,
-__LINE__, " +.81",    8.1000000000e-01, 5,
-__LINE__, " +0.81",    8.1000000000e-01, 6,
-__LINE__, " .81",    8.1000000000e-01, 4,
-__LINE__, " 0.81",    8.1000000000e-01, 5,
-__LINE__, "+.81",    8.1000000000e-01, 4,
-__LINE__, "+0.81",    8.1000000000e-01, 5,
-__LINE__, ".81",    8.1000000000e-01, 3,
-__LINE__, "0.81",    8.1000000000e-01, 4,
-__LINE__, " +0820",    8.2000000000e+02, 6,
-__LINE__, " +820",    8.2000000000e+02, 5,
-__LINE__, " 0820",    8.2000000000e+02, 5,
-__LINE__, " 820",    8.2000000000e+02, 4,
-__LINE__, "+0820",    8.2000000000e+02, 5,
-__LINE__, "+820",    8.2000000000e+02, 4,
-__LINE__, "0820",    8.2000000000e+02, 4,
-__LINE__, "820",    8.2000000000e+02, 3,
-__LINE__, " +.820",    8.2000000000e-01, 6,
-__LINE__, " +0.820",    8.2000000000e-01, 7,
-__LINE__, " .820",    8.2000000000e-01, 5,
-__LINE__, " 0.820",    8.2000000000e-01, 6,
-__LINE__, "+.820",    8.2000000000e-01, 5,
-__LINE__, "+0.820",    8.2000000000e-01, 6,
-__LINE__, ".820",    8.2000000000e-01, 4,
-__LINE__, "0.820",    8.2000000000e-01, 5,
-__LINE__, " +.9e+1",    9.0000000000e+00, 7,
-__LINE__, " +.9e1",    9.0000000000e+00, 6,
-__LINE__, " +0.9e+1",    9.0000000000e+00, 8,
-__LINE__, " +0.9e1",    9.0000000000e+00, 7,
-__LINE__, " +09",    9.0000000000e+00, 4,
-__LINE__, " +09+",    9.0000000000e+00, 4,
-__LINE__, " +09+1",    9.0000000000e+00, 4,
-__LINE__, " +09+20",    9.0000000000e+00, 4,
-__LINE__, " +09-",    9.0000000000e+00, 4,
-__LINE__, " +09-1",    9.0000000000e+00, 4,
-__LINE__, " +09-20",    9.0000000000e+00, 4,
-__LINE__, " +09e",    9.0000000000e+00, 4,
-__LINE__, " +09e+",    9.0000000000e+00, 4,
-__LINE__, " +09e-",    9.0000000000e+00, 4,
-__LINE__, " +9",    9.0000000000e+00, 3,
-__LINE__, " +9+",    9.0000000000e+00, 3,
-__LINE__, " +9+1",    9.0000000000e+00, 3,
-__LINE__, " +9+20",    9.0000000000e+00, 3,
-__LINE__, " +9-",    9.0000000000e+00, 3,
-__LINE__, " +9-1",    9.0000000000e+00, 3,
-__LINE__, " +9-20",    9.0000000000e+00, 3,
-__LINE__, " +9e",    9.0000000000e+00, 3,
-__LINE__, " +9e+",    9.0000000000e+00, 3,
-__LINE__, " +9e-",    9.0000000000e+00, 3,
-__LINE__, " .9e+1",    9.0000000000e+00, 6,
-__LINE__, " .9e1",    9.0000000000e+00, 5,
-__LINE__, " 0.9e+1",    9.0000000000e+00, 7,
-__LINE__, " 0.9e1",    9.0000000000e+00, 6,
-__LINE__, " 09",    9.0000000000e+00, 3,
-__LINE__, " 09+",    9.0000000000e+00, 3,
-__LINE__, " 09+1",    9.0000000000e+00, 3,
-__LINE__, " 09+20",    9.0000000000e+00, 3,
-__LINE__, " 09-",    9.0000000000e+00, 3,
-__LINE__, " 09-1",    9.0000000000e+00, 3,
-__LINE__, " 09-20",    9.0000000000e+00, 3,
-__LINE__, " 09e",    9.0000000000e+00, 3,
-__LINE__, " 09e+",    9.0000000000e+00, 3,
-__LINE__, " 09e-",    9.0000000000e+00, 3,
-__LINE__, " 9",    9.0000000000e+00, 2,
-__LINE__, " 9+",    9.0000000000e+00, 2,
-__LINE__, " 9+1",    9.0000000000e+00, 2,
-__LINE__, " 9+20",    9.0000000000e+00, 2,
-__LINE__, " 9-",    9.0000000000e+00, 2,
-__LINE__, " 9-1",    9.0000000000e+00, 2,
-__LINE__, " 9-20",    9.0000000000e+00, 2,
-__LINE__, " 9e",    9.0000000000e+00, 2,
-__LINE__, " 9e+",    9.0000000000e+00, 2,
-__LINE__, " 9e-",    9.0000000000e+00, 2,
-__LINE__, "+.9e+1",    9.0000000000e+00, 6,
-__LINE__, "+.9e1",    9.0000000000e+00, 5,
-__LINE__, "+0.9e+1",    9.0000000000e+00, 7,
-__LINE__, "+0.9e1",    9.0000000000e+00, 6,
-__LINE__, "+09",    9.0000000000e+00, 3,
-__LINE__, "+09+",    9.0000000000e+00, 3,
-__LINE__, "+09+1",    9.0000000000e+00, 3,
-__LINE__, "+09+20",    9.0000000000e+00, 3,
-__LINE__, "+09-",    9.0000000000e+00, 3,
-__LINE__, "+09-1",    9.0000000000e+00, 3,
-__LINE__, "+09-20",    9.0000000000e+00, 3,
-__LINE__, "+09e",    9.0000000000e+00, 3,
-__LINE__, "+09e+",    9.0000000000e+00, 3,
-__LINE__, "+09e-",    9.0000000000e+00, 3,
-__LINE__, "+9",    9.0000000000e+00, 2,
-__LINE__, "+9+",    9.0000000000e+00, 2,
-__LINE__, "+9+1",    9.0000000000e+00, 2,
-__LINE__, "+9+20",    9.0000000000e+00, 2,
-__LINE__, "+9-",    9.0000000000e+00, 2,
-__LINE__, "+9-1",    9.0000000000e+00, 2,
-__LINE__, "+9-20",    9.0000000000e+00, 2,
-__LINE__, "+9e",    9.0000000000e+00, 2,
-__LINE__, "+9e+",    9.0000000000e+00, 2,
-__LINE__, "+9e-",    9.0000000000e+00, 2,
-__LINE__, ".9e+1",    9.0000000000e+00, 5,
-__LINE__, ".9e1",    9.0000000000e+00, 4,
-__LINE__, "0.9e+1",    9.0000000000e+00, 6,
-__LINE__, "0.9e1",    9.0000000000e+00, 5,
-__LINE__, "09",    9.0000000000e+00, 2,
-__LINE__, "09+",    9.0000000000e+00, 2,
-__LINE__, "09+1",    9.0000000000e+00, 2,
-__LINE__, "09+20",    9.0000000000e+00, 2,
-__LINE__, "09-",    9.0000000000e+00, 2,
-__LINE__, "09-1",    9.0000000000e+00, 2,
-__LINE__, "09-20",    9.0000000000e+00, 2,
-__LINE__, "09e",    9.0000000000e+00, 2,
-__LINE__, "09e+",    9.0000000000e+00, 2,
-__LINE__, "09e-",    9.0000000000e+00, 2,
-__LINE__, "9",    9.0000000000e+00, 1,
-__LINE__, "9+",    9.0000000000e+00, 1,
-__LINE__, "9+1",    9.0000000000e+00, 1,
-__LINE__, "9+20",    9.0000000000e+00, 1,
-__LINE__, "9-",    9.0000000000e+00, 1,
-__LINE__, "9-1",    9.0000000000e+00, 1,
-__LINE__, "9-20",    9.0000000000e+00, 1,
-__LINE__, "9e",    9.0000000000e+00, 1,
-__LINE__, "9e+",    9.0000000000e+00, 1,
-__LINE__, "9e-",    9.0000000000e+00, 1,
-__LINE__, " +09e+1",    9.0000000000e+01, 7,
-__LINE__, " +09e1",    9.0000000000e+01, 6,
-__LINE__, " +9e+1",    9.0000000000e+01, 6,
-__LINE__, " +9e1",    9.0000000000e+01, 5,
-__LINE__, " 09e+1",    9.0000000000e+01, 6,
-__LINE__, " 09e1",    9.0000000000e+01, 5,
-__LINE__, " 9e+1",    9.0000000000e+01, 5,
-__LINE__, " 9e1",    9.0000000000e+01, 4,
-__LINE__, "+09e+1",    9.0000000000e+01, 6,
-__LINE__, "+09e1",    9.0000000000e+01, 5,
-__LINE__, "+9e+1",    9.0000000000e+01, 5,
-__LINE__, "+9e1",    9.0000000000e+01, 4,
-__LINE__, "09e+1",    9.0000000000e+01, 5,
-__LINE__, "09e1",    9.0000000000e+01, 4,
-__LINE__, "9e+1",    9.0000000000e+01, 4,
-__LINE__, "9e1",    9.0000000000e+01, 3,
-__LINE__, " +.9e+20",    9.0000000000e+19, 8,
-__LINE__, " +.9e20",    9.0000000000e+19, 7,
-__LINE__, " +0.9e+20",    9.0000000000e+19, 9,
-__LINE__, " +0.9e20",    9.0000000000e+19, 8,
-__LINE__, " .9e+20",    9.0000000000e+19, 7,
-__LINE__, " .9e20",    9.0000000000e+19, 6,
-__LINE__, " 0.9e+20",    9.0000000000e+19, 8,
-__LINE__, " 0.9e20",    9.0000000000e+19, 7,
-__LINE__, "+.9e+20",    9.0000000000e+19, 7,
-__LINE__, "+.9e20",    9.0000000000e+19, 6,
-__LINE__, "+0.9e+20",    9.0000000000e+19, 8,
-__LINE__, "+0.9e20",    9.0000000000e+19, 7,
-__LINE__, ".9e+20",    9.0000000000e+19, 6,
-__LINE__, ".9e20",    9.0000000000e+19, 5,
-__LINE__, "0.9e+20",    9.0000000000e+19, 7,
-__LINE__, "0.9e20",    9.0000000000e+19, 6,
-__LINE__, " +09e+20",    9.0000000000e+20, 8,
-__LINE__, " +09e20",    9.0000000000e+20, 7,
-__LINE__, " +9e+20",    9.0000000000e+20, 7,
-__LINE__, " +9e20",    9.0000000000e+20, 6,
-__LINE__, " 09e+20",    9.0000000000e+20, 7,
-__LINE__, " 09e20",    9.0000000000e+20, 6,
-__LINE__, " 9e+20",    9.0000000000e+20, 6,
-__LINE__, " 9e20",    9.0000000000e+20, 5,
-__LINE__, "+09e+20",    9.0000000000e+20, 7,
-__LINE__, "+09e20",    9.0000000000e+20, 6,
-__LINE__, "+9e+20",    9.0000000000e+20, 6,
-__LINE__, "+9e20",    9.0000000000e+20, 5,
-__LINE__, "09e+20",    9.0000000000e+20, 6,
-__LINE__, "09e20",    9.0000000000e+20, 5,
-__LINE__, "9e+20",    9.0000000000e+20, 5,
-__LINE__, "9e20",    9.0000000000e+20, 4,
-__LINE__, " +.9",    9.0000000000e-01, 4,
-__LINE__, " +.9+",    9.0000000000e-01, 4,
-__LINE__, " +.9+1",    9.0000000000e-01, 4,
-__LINE__, " +.9+20",    9.0000000000e-01, 4,
-__LINE__, " +.9-",    9.0000000000e-01, 4,
-__LINE__, " +.9-1",    9.0000000000e-01, 4,
-__LINE__, " +.9-20",    9.0000000000e-01, 4,
-__LINE__, " +.9e",    9.0000000000e-01, 4,
-__LINE__, " +.9e+",    9.0000000000e-01, 4,
-__LINE__, " +.9e-",    9.0000000000e-01, 4,
-__LINE__, " +0.9",    9.0000000000e-01, 5,
-__LINE__, " +0.9+",    9.0000000000e-01, 5,
-__LINE__, " +0.9+1",    9.0000000000e-01, 5,
-__LINE__, " +0.9+20",    9.0000000000e-01, 5,
-__LINE__, " +0.9-",    9.0000000000e-01, 5,
-__LINE__, " +0.9-1",    9.0000000000e-01, 5,
-__LINE__, " +0.9-20",    9.0000000000e-01, 5,
-__LINE__, " +0.9e",    9.0000000000e-01, 5,
-__LINE__, " +0.9e+",    9.0000000000e-01, 5,
-__LINE__, " +0.9e-",    9.0000000000e-01, 5,
-__LINE__, " +09e-1",    9.0000000000e-01, 7,
-__LINE__, " +9e-1",    9.0000000000e-01, 6,
-__LINE__, " .9",    9.0000000000e-01, 3,
-__LINE__, " .9+",    9.0000000000e-01, 3,
-__LINE__, " .9+1",    9.0000000000e-01, 3,
-__LINE__, " .9+20",    9.0000000000e-01, 3,
-__LINE__, " .9-",    9.0000000000e-01, 3,
-__LINE__, " .9-1",    9.0000000000e-01, 3,
-__LINE__, " .9-20",    9.0000000000e-01, 3,
-__LINE__, " .9e",    9.0000000000e-01, 3,
-__LINE__, " .9e+",    9.0000000000e-01, 3,
-__LINE__, " .9e-",    9.0000000000e-01, 3,
-__LINE__, " 0.9",    9.0000000000e-01, 4,
-__LINE__, " 0.9+",    9.0000000000e-01, 4,
-__LINE__, " 0.9+1",    9.0000000000e-01, 4,
-__LINE__, " 0.9+20",    9.0000000000e-01, 4,
-__LINE__, " 0.9-",    9.0000000000e-01, 4,
-__LINE__, " 0.9-1",    9.0000000000e-01, 4,
-__LINE__, " 0.9-20",    9.0000000000e-01, 4,
-__LINE__, " 0.9e",    9.0000000000e-01, 4,
-__LINE__, " 0.9e+",    9.0000000000e-01, 4,
-__LINE__, " 0.9e-",    9.0000000000e-01, 4,
-__LINE__, " 09e-1",    9.0000000000e-01, 6,
-__LINE__, " 9e-1",    9.0000000000e-01, 5,
-__LINE__, "+.9",    9.0000000000e-01, 3,
-__LINE__, "+.9+",    9.0000000000e-01, 3,
-__LINE__, "+.9+1",    9.0000000000e-01, 3,
-__LINE__, "+.9+20",    9.0000000000e-01, 3,
-__LINE__, "+.9-",    9.0000000000e-01, 3,
-__LINE__, "+.9-1",    9.0000000000e-01, 3,
-__LINE__, "+.9-20",    9.0000000000e-01, 3,
-__LINE__, "+.9e",    9.0000000000e-01, 3,
-__LINE__, "+.9e+",    9.0000000000e-01, 3,
-__LINE__, "+.9e-",    9.0000000000e-01, 3,
-__LINE__, "+0.9",    9.0000000000e-01, 4,
-__LINE__, "+0.9+",    9.0000000000e-01, 4,
-__LINE__, "+0.9+1",    9.0000000000e-01, 4,
-__LINE__, "+0.9+20",    9.0000000000e-01, 4,
-__LINE__, "+0.9-",    9.0000000000e-01, 4,
-__LINE__, "+0.9-1",    9.0000000000e-01, 4,
-__LINE__, "+0.9-20",    9.0000000000e-01, 4,
-__LINE__, "+0.9e",    9.0000000000e-01, 4,
-__LINE__, "+0.9e+",    9.0000000000e-01, 4,
-__LINE__, "+0.9e-",    9.0000000000e-01, 4,
-__LINE__, "+09e-1",    9.0000000000e-01, 6,
-__LINE__, "+9e-1",    9.0000000000e-01, 5,
-__LINE__, ".9",    9.0000000000e-01, 2,
-__LINE__, ".9+",    9.0000000000e-01, 2,
-__LINE__, ".9+1",    9.0000000000e-01, 2,
-__LINE__, ".9+20",    9.0000000000e-01, 2,
-__LINE__, ".9-",    9.0000000000e-01, 2,
-__LINE__, ".9-1",    9.0000000000e-01, 2,
-__LINE__, ".9-20",    9.0000000000e-01, 2,
-__LINE__, ".9e",    9.0000000000e-01, 2,
-__LINE__, ".9e+",    9.0000000000e-01, 2,
-__LINE__, ".9e-",    9.0000000000e-01, 2,
-__LINE__, "0.9",    9.0000000000e-01, 3,
-__LINE__, "0.9+",    9.0000000000e-01, 3,
-__LINE__, "0.9+1",    9.0000000000e-01, 3,
-__LINE__, "0.9+20",    9.0000000000e-01, 3,
-__LINE__, "0.9-",    9.0000000000e-01, 3,
-__LINE__, "0.9-1",    9.0000000000e-01, 3,
-__LINE__, "0.9-20",    9.0000000000e-01, 3,
-__LINE__, "0.9e",    9.0000000000e-01, 3,
-__LINE__, "0.9e+",    9.0000000000e-01, 3,
-__LINE__, "0.9e-",    9.0000000000e-01, 3,
-__LINE__, "09e-1",    9.0000000000e-01, 5,
-__LINE__, "9e-1",    9.0000000000e-01, 4,
-__LINE__, " +.9e-1",    9.0000000000e-02, 7,
-__LINE__, " +0.9e-1",    9.0000000000e-02, 8,
-__LINE__, " .9e-1",    9.0000000000e-02, 6,
-__LINE__, " 0.9e-1",    9.0000000000e-02, 7,
-__LINE__, "+.9e-1",    9.0000000000e-02, 6,
-__LINE__, "+0.9e-1",    9.0000000000e-02, 7,
-__LINE__, ".9e-1",    9.0000000000e-02, 5,
-__LINE__, "0.9e-1",    9.0000000000e-02, 6,
-__LINE__, " +09e-20",    9.0000000000e-20, 8,
-__LINE__, " +9e-20",    9.0000000000e-20, 7,
-__LINE__, " 09e-20",    9.0000000000e-20, 7,
-__LINE__, " 9e-20",    9.0000000000e-20, 6,
-__LINE__, "+09e-20",    9.0000000000e-20, 7,
-__LINE__, "+9e-20",    9.0000000000e-20, 6,
-__LINE__, "09e-20",    9.0000000000e-20, 6,
-__LINE__, "9e-20",    9.0000000000e-20, 5,
-__LINE__, " +.9e-20",    9.0000000000e-21, 8,
-__LINE__, " +0.9e-20",    9.0000000000e-21, 9,
-__LINE__, " .9e-20",    9.0000000000e-21, 7,
-__LINE__, " 0.9e-20",    9.0000000000e-21, 8,
-__LINE__, "+.9e-20",    9.0000000000e-21, 7,
-__LINE__, "+0.9e-20",    9.0000000000e-21, 8,
-__LINE__, ".9e-20",    9.0000000000e-21, 6,
-__LINE__, "0.9e-20",    9.0000000000e-21, 7,
-__LINE__, " +091",    9.1000000000e+01, 5,
-__LINE__, " +91",    9.1000000000e+01, 4,
-__LINE__, " 091",    9.1000000000e+01, 4,
-__LINE__, " 91",    9.1000000000e+01, 3,
-__LINE__, "+091",    9.1000000000e+01, 4,
-__LINE__, "+91",    9.1000000000e+01, 3,
-__LINE__, "091",    9.1000000000e+01, 3,
-__LINE__, "91",    9.1000000000e+01, 2,
-__LINE__, " +.91",    9.1000000000e-01, 5,
-__LINE__, " +0.91",    9.1000000000e-01, 6,
-__LINE__, " .91",    9.1000000000e-01, 4,
-__LINE__, " 0.91",    9.1000000000e-01, 5,
-__LINE__, "+.91",    9.1000000000e-01, 4,
-__LINE__, "+0.91",    9.1000000000e-01, 5,
-__LINE__, ".91",    9.1000000000e-01, 3,
-__LINE__, "0.91",    9.1000000000e-01, 4,
-__LINE__, " +0920",    9.2000000000e+02, 6,
-__LINE__, " +920",    9.2000000000e+02, 5,
-__LINE__, " 0920",    9.2000000000e+02, 5,
-__LINE__, " 920",    9.2000000000e+02, 4,
-__LINE__, "+0920",    9.2000000000e+02, 5,
-__LINE__, "+920",    9.2000000000e+02, 4,
-__LINE__, "0920",    9.2000000000e+02, 4,
-__LINE__, "920",    9.2000000000e+02, 3,
-__LINE__, " +.920",    9.2000000000e-01, 6,
-__LINE__, " +0.920",    9.2000000000e-01, 7,
-__LINE__, " .920",    9.2000000000e-01, 5,
-__LINE__, " 0.920",    9.2000000000e-01, 6,
-#endif
-__LINE__, "+.920",    9.2000000000e-01, 5,
-__LINE__, "+0.920",    9.2000000000e-01, 6,
-__LINE__, ".920",    9.2000000000e-01, 4,
-__LINE__, "0.920",    9.2000000000e-01, 5,
-__LINE__, "    1.234*",    1.2340000000e+00, 9,
-__LINE__, "  87.23*",    8.7230000000e+01, 7,
-__LINE__, " 1267*abc",    1.2670000000e+03, 5,
-__LINE__, " 1267*abc",    1.2670000000e+03, 5,
-0
-};
-
-
diff --git a/newlib/libm/test/convert.c b/newlib/libm/test/convert.c
deleted file mode 100644
index a74828027..000000000
--- a/newlib/libm/test/convert.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Test conversions */
-
-#include "test.h"
-#include <stdlib.h>
-#include <errno.h>
-
-static char buffer[500];
-
-extern double_type doubles[];
-
-/* TEST ATOF  ATOFF */
-
-double_type *pd = doubles;
-
-void
-_DEFUN_VOID(test_strtod)
-{
-  char *tail;
-  double v;
-  /* On average we'll loose 1/2 a bit, so the test is for within 1 bit  */
-  v = strtod(pd->string, &tail);
-  test_mok(v, pd->value, 64);
-  test_iok(tail - pd->string, pd->endscan);
-}
-
-void
-_DEFUN_VOID(test_strtof)
-{
-  char *tail;
-  double v;
-  /* On average we'll loose 1/2 a bit, so the test is for within 1 bit  */
-  v = strtof(pd->string, &tail);
-  test_mok(v, pd->value, 32);
-  test_iok(tail - pd->string, pd->endscan);
-}
-
-void
-_DEFUN_VOID(test_atof)
-{
-  test_mok(atof(pd->string), pd->value, 64);
-}
-
-void
-_DEFUN_VOID(test_atoff)
-{
-  test_mok(atoff(pd->string), pd->value, 32);
-}
-
-
-static
-void 
-_DEFUN(iterate,(func, name),
-       void _EXFUN((*func),(void)) _AND
-       char *name)
-{
-
-  newfunc(name);
-  pd = doubles;
-  while (pd->string) {
-    line(pd->line);
-    func();
-    pd++;
-  }
-}
-
-
-extern int_type ints[];
-
-int_type *p = ints;
-
-
-static void
-_DEFUN(int_iterate,(func, name),
-       void (*func)() _AND
-       char *name)
-{
-  newfunc(name);
-
-  p = ints;
-  while (p->string) {
-    line(p->line);
-    errno = 0;
-    func();
-    p++;
-  }
-}
-
-void
-_DEFUN(test_strtol_base,(base, pi, string),
-       int base _AND
-       int_scan_type *pi _AND
-       char *string)
-{
-  long r;
-  char *ptr;
-  errno = 0;
-  r = strtol(string, &ptr, base);
-  test_iok(r, pi->value);
-  test_eok(errno, pi->errno_val);
-  test_iok(ptr - string, pi->end);
-}
-
-void
-_DEFUN_VOID(test_strtol)
-{
-  test_strtol_base(8,&(p->octal), p->string);
-  test_strtol_base(10,&(p->decimal), p->string);
-  test_strtol_base(16, &(p->hex), p->string);
-  test_strtol_base(0, &(p->normal), p->string);
-  test_strtol_base(26, &(p->alphabetical), p->string);
-}
-
-void
-_DEFUN_VOID(test_atoi)
-{
-  test_iok(atoi(p->string), p->decimal.value);
-  test_eok(errno, p->decimal.errno_val);
-}
-
-void
-_DEFUN_VOID(test_atol)
-{
-  test_iok(atol(p->string), p->decimal.value);
-  test_eok(errno, p->decimal.errno_val);
-}
-
-/* test ECVT and friends */
-extern ddouble_type ddoubles[];
-ddouble_type *pdd;
-void
-_DEFUN_VOID(test_ecvtbuf)
-{
-  int a2,a3;
-  char *s;
-  s =  ecvtbuf(pdd->value, pdd->e1, &a2, &a3, buffer);
-
-  test_sok(s,pdd->estring);
-  test_iok(pdd->e2,a2);
-  test_iok(pdd->e3,a3);
-}
-
-void
-_DEFUN_VOID(test_ecvt)
-{
-  int a2,a3;
-  char *s;
-  s =  ecvt(pdd->value, pdd->e1, &a2, &a3);
-
-  test_sok(s,pdd->estring);
-  test_iok(pdd->e2,a2);
-  test_iok(pdd->e3,a3);
-
-  s =  ecvtf(pdd->value, pdd->e1, &a2, &a3);
-
-  test_sok(s,pdd->estring);
-  test_iok(pdd->e2,a2);
-  test_iok(pdd->e3,a3);
-}
-
-void
-_DEFUN_VOID(test_fcvtbuf)
-{
-  int a2,a3;
-  char *s;
-  s =  fcvtbuf(pdd->value, pdd->f1, &a2, &a3, buffer);
-
-  test_scok(s,pdd->fstring,10);
-  test_iok(pdd->f2,a2);
-  test_iok(pdd->f3,a3);
-}
-
-void
-_DEFUN_VOID(test_gcvt)
-{
-  char *s = gcvt(pdd->value, pdd->g1, buffer);  
-  test_scok(s, pdd->gstring, 9);
-  
-  s = gcvtf(pdd->value, pdd->g1, buffer);  
-  test_scok(s, pdd->gstring, 9);
-
-}
-
-void
-_DEFUN_VOID(test_fcvt)
-{
-  int a2,a3;
-  char *sd;
-  char *sf;
-  double v1;
-  double v2;
-  sd =  fcvt(pdd->value, pdd->f1, &a2, &a3);
-
-  test_scok(sd,pdd->fstring,10);
-  test_iok(pdd->f2,a2);
-  test_iok(pdd->f3,a3);
-
-  /* Test the float version by converting and inspecting the numbers 3
-   after reconverting */
-  sf =  fcvtf(pdd->value, pdd->f1, &a2, &a3);
-  sscanf(sd, "%lg", &v1);
-  sscanf(sf, "%lg", &v2);
-  test_mok(v1, v2,32);
-  test_iok(pdd->f2,a2);
-  test_iok(pdd->f3,a3);
-}
-
-static void
-
-_DEFUN(diterate,(func, name),
-       void (*func)() _AND
-       char *name)
-{
-  newfunc(name);
-
-  pdd = ddoubles;
-  while (pdd->estring) {
-    line(pdd->line);
-    errno = 0;
-    func();
-    pdd++;
-  }
-}
-
-
-void
-_DEFUN_VOID(deltest)
-{
-  newfunc("rounding");
-  line(1);
-  sprintf(buffer,"%.2f", 9.999);
-  test_sok(buffer,"10.00");
-  line(2);
-  sprintf(buffer,"%.2g", 1.0);
-  test_sok(buffer,"1");
-  line(3);
-  sprintf(buffer,"%.2g", 1.2e-6);
-  test_sok(buffer,"1.2e-06");
-  line(4);
-  sprintf(buffer,"%.0g", 1.0);
-  test_sok(buffer,"1");
-  line(5);
-  sprintf(buffer,"%.0e",1e1);
-  test_sok(buffer,"1e+01");
-  line(6);  
-  sprintf(buffer, "%f", 12.3456789);
-  test_sok(buffer, "12.345679");
-  line(7);  
-  sprintf(buffer, "%6.3f", 12.3456789);
-  test_sok(buffer, "12.346");
-  line(8);  
-  sprintf(buffer,"%.0f", 12.3456789);
-  test_sok(buffer,"12");
-}
-
-/* Most of what sprint does is tested with the tests of
-   fcvt/ecvt/gcvt, but here are some more */
-void
-_DEFUN_VOID(test_sprint)
-{
-  extern sprint_double_type sprint_doubles[];
-  sprint_double_type *s = sprint_doubles;
-  extern sprint_int_type sprint_ints[];
-  sprint_int_type *si = sprint_ints;
-
-
-  newfunc( "sprintf");  
-
-
-  while (s->line) 
-  {
-    line( s->line);
-    sprintf(buffer, s->format_string, s->value);
-    test_scok(buffer, s->result, 12); /* Only check the first 12 digs,
-					 other stuff is random */
-    s++;
-  }
-
-  while (si->line) 
-  {
-    line( si->line);
-    sprintf(buffer, si->format_string, si->value);
-    test_sok(buffer, si->result);
-    si++;
-  }  
-}
-
-/* Scanf calls strtod etc tested elsewhere, but also has some pattern matching skills */
-void
-_DEFUN_VOID(test_scan)
-{
-  int i,j;
-  extern sprint_double_type sprint_doubles[];
-  sprint_double_type *s = sprint_doubles;
-  extern sprint_int_type sprint_ints[];
-  sprint_int_type *si = sprint_ints;
-
-  newfunc( "scanf");  
-  
-  /* Test scanf by converting all the numbers in the sprint vectors
-     to and from their source and making sure nothing breaks */
-
-  while (s->line) 
-  {
-
-    double d0,d1;
-    line( s->line);
-    sscanf(s->result, "%lg", &d0);
-    sprintf(buffer, "%20.17e", d0);
-    sscanf(buffer, "%lg", &d1);
-    test_mok(d0,d1, 64);
-    s++;
-  }
-
-  /* And integers too */
-  while (si->line) 
-  {
-
-    long d0,d1;
-    
-    line(si->line);
-    sscanf(si->result, "%d", &d0);
-    sprintf(buffer, "%d", d0);
-    sscanf(buffer, "%d", &d1);
-    test_iok(d0,d1);
-    si++;
-  }
-
-  /* And the string matching */
-
-  sscanf("    9","%d", &i);
-  test_iok(i, 9);
-  sscanf("foo bar 123 zap 456","foo bar %d zap %d", &i, &j);
-  test_iok(i, 123);
-  test_iok(j, 456);
-  
-  sscanf("magicXYZZYfoobar","magic%[XYZ]", buffer);
-  test_sok("XYZZY", buffer);
-  sscanf("magicXYZZYfoobar","%[^XYZ]", buffer);
-  test_sok("magic", buffer);
-}
-
-void
-_DEFUN_VOID(test_cvt)
-{
-  deltest();
-
-  diterate(test_fcvtbuf,"fcvtbuf");
-  diterate(test_fcvt,"fcvt/fcvtf");
-
-  diterate(test_gcvt,"gcvt/gcvtf");
-  diterate(test_ecvtbuf,"ecvtbuf");
-  diterate(test_ecvt,"ecvt/ecvtf");
-  
-  iterate(test_strtod, "strtod");
-
-  test_scan();
-  test_sprint();  
-  iterate(test_atof, "atof");
-  iterate(test_atoff, "atoff");
-
-  iterate(test_strtof, "strtof");
-
-  int_iterate(test_atoi,"atoi");
-  int_iterate(test_atol,"atol");
-  int_iterate(test_strtol, "strtol");
-}
diff --git a/newlib/libm/test/cos_vec.c b/newlib/libm/test/cos_vec.c
deleted file mode 100644
index 37d669eef..000000000
--- a/newlib/libm/test/cos_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type cos_vec[] = {
-{64, 0,123,__LINE__, 0x3fd730de, 0x943b79d3, 0xbff33333, 0x33333333},			/* 0.36235=f(-1.20000)*/
-{64, 0,123,__LINE__, 0x3fd7c946, 0x7d260cb9, 0xbff30a3d, 0x70a3d70a},			/* 0.37165=f(-1.19000)*/
-{64, 0,123,__LINE__, 0x3fd86112, 0x83b8fab2, 0xbff2e147, 0xae147ae1},			/* 0.38092=f(-1.18000)*/
-{64, 0,123,__LINE__, 0x3fd8f83e, 0xc5255294, 0xbff2b851, 0xeb851eb8},			/* 0.39015=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3fd98ec7, 0x62b332c4, 0xbff28f5c, 0x28f5c28f},			/* 0.39933=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3fda24a8, 0x81db25ea, 0xbff26666, 0x66666666},			/* 0.40848=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3fdab9de, 0x4c5f6433, 0xbff23d70, 0xa3d70a3d},			/* 0.41759=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3fdb4e64, 0xf064f880, 0xbff2147a, 0xe147ae14},			/* 0.42665=f(-1.13000)*/
-{64, 0,123,__LINE__, 0x3fdbe238, 0xa08cc8cd, 0xbff1eb85, 0x1eb851eb},			/* 0.43568=f(-1.12000)*/
-{64, 0,123,__LINE__, 0x3fdc7555, 0x940c813b, 0xbff1c28f, 0x5c28f5c2},			/* 0.44466=f(-1.11000)*/
-{64, 0,123,__LINE__, 0x3fdd07b8, 0x06c76113, 0xbff19999, 0x99999999},			/* 0.45359=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fdd995c, 0x3966e922, 0xbff170a3, 0xd70a3d70},			/* 0.46248=f(-1.09000)*/
-{64, 0,123,__LINE__, 0x3fde2a3e, 0x71736ac6, 0xbff147ae, 0x147ae147},			/* 0.47132=f(-1.08000)*/
-{64, 0,123,__LINE__, 0x3fdeba5a, 0xf96c7715, 0xbff11eb8, 0x51eb851e},			/* 0.48012=f(-1.07000)*/
-{64, 0,123,__LINE__, 0x3fdf49ae, 0x20e12d7c, 0xbff0f5c2, 0x8f5c28f5},			/* 0.48887=f(-1.06000)*/
-{64, 0,123,__LINE__, 0x3fdfd834, 0x3c886925, 0xbff0cccc, 0xcccccccc},			/* 0.49757=f(-1.05000)*/
-{64, 0,123,__LINE__, 0x3fe032f4, 0xd32c6654, 0xbff0a3d7, 0x0a3d70a3},			/* 0.50622=f(-1.04000)*/
-{64, 0,123,__LINE__, 0x3fe07965, 0x5ed055a1, 0xbff07ae1, 0x47ae147a},			/* 0.51481=f(-1.03000)*/
-{64, 0,123,__LINE__, 0x3fe0bf69, 0xf38ee78d, 0xbff051eb, 0x851eb851},			/* 0.52336=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3fe10500, 0xc68a8dee, 0xbff028f5, 0xc28f5c28},			/* 0.53186=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x3fe14a28, 0x0fb5068d, 0xbfefffff, 0xfffffffe},			/* 0.54030=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x3fe18ede, 0x09db07f0, 0xbfefae14, 0x7ae147ac},			/* 0.54868=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3fe1d320, 0xf2afdb6b, 0xbfef5c28, 0xf5c28f5a},			/* 0.55702=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3fe216ef, 0x0ad8e431, 0xbfef0a3d, 0x70a3d708},			/* 0.56529=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3fe25a46, 0x95f91311, 0xbfeeb851, 0xeb851eb6},			/* 0.57351=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x3fe29d25, 0xdabc46a3, 0xbfee6666, 0x66666664},			/* 0.58168=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3fe2df8b, 0x22e29787, 0xbfee147a, 0xe147ae12},			/* 0.58978=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x3fe32174, 0xbb4b9082, 0xbfedc28f, 0x5c28f5c0},			/* 0.59783=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x3fe362e0, 0xf4015217, 0xbfed70a3, 0xd70a3d6e},			/* 0.60582=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x3fe3a3ce, 0x2043a16d, 0xbfed1eb8, 0x51eb851c},			/* 0.61374=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3fe3e43a, 0x9692e21e, 0xbfeccccc, 0xccccccca},			/* 0.62160=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x3fe42424, 0xb0bafac6, 0xbfec7ae1, 0x47ae1478},			/* 0.62941=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x3fe4638a, 0xcbde23e8, 0xbfec28f5, 0xc28f5c26},			/* 0.63715=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3fe4a26b, 0x487fa104, 0xbfebd70a, 0x3d70a3d4},			/* 0.64482=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x3fe4e0c4, 0x8a8e637d, 0xbfeb851e, 0xb851eb82},			/* 0.65243=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x3fe51e94, 0xf96f971d, 0xbfeb3333, 0x33333330},			/* 0.65998=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x3fe55bdb, 0x000917dd, 0xbfeae147, 0xae147ade},			/* 0.66746=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x3fe59895, 0x0ccbd0c8, 0xbfea8f5c, 0x28f5c28c},			/* 0.67487=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fe5d4c1, 0x91be0397, 0xbfea3d70, 0xa3d70a3a},			/* 0.68222=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3fe6105f, 0x048578dc, 0xbfe9eb85, 0x1eb851e8},			/* 0.68949=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3fe64b6b, 0xde719867, 0xbfe99999, 0x99999996},			/* 0.69670=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3fe685e6, 0x9c8569b2, 0xbfe947ae, 0x147ae144},			/* 0.70384=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3fe6bfcd, 0xbf817bfd, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.71091=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3fe6f91f, 0xcbedb5fa, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.71791=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3fe731db, 0x4a230ca5, 0xbfe851eb, 0x851eb84e},			/* 0.72483=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x3fe769fe, 0xc6552121, 0xbfe7ffff, 0xfffffffc},			/* 0.73168=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x3fe7a188, 0xd09bc551, 0xbfe7ae14, 0x7ae147aa},			/* 0.73846=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3fe7d877, 0xfcfc66ef, 0xbfe75c28, 0xf5c28f58},			/* 0.74517=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3fe80eca, 0xe37360e8, 0xbfe70a3d, 0x70a3d706},			/* 0.75180=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3fe84480, 0x1ffd32b8, 0xbfe6b851, 0xeb851eb4},			/* 0.75836=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3fe87996, 0x529f9d95, 0xbfe66666, 0x66666662},			/* 0.76484=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x3fe8ae0c, 0x1f72a71d, 0xbfe6147a, 0xe147ae10},			/* 0.77124=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3fe8e1e0, 0x2ea98160, 0xbfe5c28f, 0x5c28f5be},			/* 0.77757=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3fe91511, 0x2c9b57f7, 0xbfe570a3, 0xd70a3d6c},			/* 0.78382=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3fe9479d, 0xc9cc0203, 0xbfe51eb8, 0x51eb851a},			/* 0.78999=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x3fe97984, 0xbaf498c4, 0xbfe4cccc, 0xccccccc8},			/* 0.79608=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x3fe9aac4, 0xb90bf2aa, 0xbfe47ae1, 0x47ae1476},			/* 0.80209=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3fe9db5c, 0x814f028e, 0xbfe428f5, 0xc28f5c24},			/* 0.80802=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3fea0b4a, 0xd5491aef, 0xbfe3d70a, 0x3d70a3d2},			/* 0.81387=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3fea3a8e, 0x7adc14f9, 0xbfe3851e, 0xb851eb80},			/* 0.81964=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3fea6926, 0x3c485b17, 0xbfe33333, 0x3333332e},			/* 0.82533=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fea9710, 0xe834d6e9, 0xbfe2e147, 0xae147adc},			/* 0.83094=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3feac44d, 0x51b6c25e, 0xbfe28f5c, 0x28f5c28a},			/* 0.83646=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x3feaf0da, 0x50595bc8, 0xbfe23d70, 0xa3d70a38},			/* 0.84190=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3feb1cb6, 0xc0257cb5, 0xbfe1eb85, 0x1eb851e6},			/* 0.84725=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3feb47e1, 0x81a91353, 0xbfe19999, 0x99999994},			/* 0.85252=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x3feb7259, 0x79fe7e3e, 0xbfe147ae, 0x147ae142},			/* 0.85770=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3feb9c1d, 0x92d3ca78, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.86280=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3febc52c, 0xba71d366, 0xbfe0a3d7, 0x0a3d709e},			/* 0.86781=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x3febed85, 0xe3c3449c, 0xbfe051eb, 0x851eb84c},			/* 0.87274=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3fec1528, 0x065b7d52, 0xbfdfffff, 0xfffffff4},			/* 0.87758=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3fec3c12, 0x1e7d5552, 0xbfdf5c28, 0xf5c28f50},			/* 0.88233=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x3fec6243, 0x2d21c327, 0xbfdeb851, 0xeb851eac},			/* 0.88699=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fec87ba, 0x37fe6377, 0xbfde147a, 0xe147ae08},			/* 0.89156=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3fecac76, 0x498be14e, 0xbfdd70a3, 0xd70a3d64},			/* 0.89605=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x3fecd076, 0x710c3f30, 0xbfdccccc, 0xccccccc0},			/* 0.90044=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fecf3b9, 0xc29100d2, 0xbfdc28f5, 0xc28f5c1c},			/* 0.90475=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3fed163f, 0x5701354b, 0xbfdb851e, 0xb851eb78},			/* 0.90896=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3fed3806, 0x4c1f6194, 0xbfdae147, 0xae147ad4},			/* 0.91308=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3fed590d, 0xc48f4b35, 0xbfda3d70, 0xa3d70a30},			/* 0.91712=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3fed7954, 0xe7dba2fa, 0xbfd99999, 0x9999998c},			/* 0.92106=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3fed98da, 0xe27b8f80, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.92490=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3fedb79e, 0xe5d81784, 0xbfd851eb, 0x851eb844},			/* 0.92866=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3fedd5a0, 0x28516bca, 0xbfd7ae14, 0x7ae147a0},			/* 0.93232=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3fedf2dd, 0xe5441076, 0xbfd70a3d, 0x70a3d6fc},			/* 0.93589=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3fee0f57, 0x5d0de5ba, 0xbfd66666, 0x66666658},			/* 0.93937=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3fee2b0b, 0xd5130fb4, 0xbfd5c28f, 0x5c28f5b4},			/* 0.94275=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3fee45fa, 0x97c2bd66, 0xbfd51eb8, 0x51eb8510},			/* 0.94604=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3fee6022, 0xf49bce9e, 0xbfd47ae1, 0x47ae146c},			/* 0.94923=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3fee7984, 0x403158a4, 0xbfd3d70a, 0x3d70a3c8},			/* 0.95233=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3fee921d, 0xd42f09bc, 0xbfd33333, 0x33333324},			/* 0.95533=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3feea9ef, 0x0f5d6b28, 0xbfd28f5c, 0x28f5c280},			/* 0.95824=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3feec0f7, 0x55a601b4, 0xbfd1eb85, 0x1eb851dc},			/* 0.96105=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3feed736, 0x10174ca4, 0xbfd147ae, 0x147ae138},			/* 0.96377=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3feeecaa, 0xace8a2f0, 0xbfd0a3d7, 0x0a3d7094},			/* 0.96638=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3fef0154, 0x9f7deea3, 0xbfcfffff, 0xffffffe0},			/* 0.96891=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3fef1533, 0x606b465b, 0xbfceb851, 0xeb851e98},			/* 0.97133=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3fef2846, 0x6d7864ca, 0xbfcd70a3, 0xd70a3d50},			/* 0.97366=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3fef3a8d, 0x49a3fe1a, 0xbfcc28f5, 0xc28f5c08},			/* 0.97589=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3fef4c07, 0x7d26f328, 0xbfcae147, 0xae147ac0},			/* 0.97803=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3fef5cb4, 0x9577627c, 0xbfc99999, 0x99999978},			/* 0.98006=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3fef6c94, 0x254b96e8, 0xbfc851eb, 0x851eb830},			/* 0.98200=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3fef7ba5, 0xc49cd3ca, 0xbfc70a3d, 0x70a3d6e8},			/* 0.98384=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3fef89e9, 0x10a9febe, 0xbfc5c28f, 0x5c28f5a0},			/* 0.98558=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3fef975d, 0xabfa26da, 0xbfc47ae1, 0x47ae1458},			/* 0.98722=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3fefa403, 0x3e5ee938, 0xbfc33333, 0x33333310},			/* 0.98877=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3fefafd9, 0x74f6b2e3, 0xbfc1eb85, 0x1eb851c8},			/* 0.99021=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3fefbae0, 0x022edffe, 0xbfc0a3d7, 0x0a3d7080},			/* 0.99156=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3fefc516, 0x9dc5b826, 0xbfbeb851, 0xeb851e71},			/* 0.99280=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3fefce7d, 0x04cc47f9, 0xbfbc28f5, 0xc28f5be2},			/* 0.99395=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3fefd712, 0xf9a817c2, 0xbfb99999, 0x99999953},			/* 0.99500=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3fefded8, 0x4414bf2a, 0xbfb70a3d, 0x70a3d6c4},			/* 0.99595=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3fefe5cc, 0xb1255600, 0xbfb47ae1, 0x47ae1435},			/* 0.99680=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x3fefebf0, 0x1345c1ef, 0xbfb1eb85, 0x1eb851a6},			/* 0.99755=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3feff142, 0x423be13a, 0xbfaeb851, 0xeb851e2d},			/* 0.99820=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3feff5c3, 0x1b289258, 0xbfa99999, 0x9999990e},			/* 0.99875=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3feff972, 0x80889878, 0xbfa47ae1, 0x47ae13ef},			/* 0.99920=f(-0.04000)*/
-{62, 0,123,__LINE__, 0x3feffc50, 0x5a355cf7, 0xbf9eb851, 0xeb851da0},			/* 0.99955=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3feffe5c, 0x95658d96, 0xbf947ae1, 0x47ae1362},			/* 0.99980=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3fefff97, 0x24ad97aa, 0xbf847ae1, 0x47ae1249},			/* 0.99995=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{62, 0,123,__LINE__, 0x3fefff97, 0x24ad97aa, 0x3f847ae1, 0x47ae16ad},			/* 0.99995=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3feffe5c, 0x95658d95, 0x3f947ae1, 0x47ae1594},			/* 0.99980=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3feffc50, 0x5a355cf6, 0x3f9eb851, 0xeb851fd2},			/* 0.99955=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3feff972, 0x80889878, 0x3fa47ae1, 0x47ae1508},			/* 0.99920=f(0.04000)*/
-{63, 0,123,__LINE__, 0x3feff5c3, 0x1b289257, 0x3fa99999, 0x99999a27},			/* 0.99875=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3feff142, 0x423be13a, 0x3faeb851, 0xeb851f46},			/* 0.99820=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fefebf0, 0x1345c1ef, 0x3fb1eb85, 0x1eb85232},			/* 0.99755=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fefe5cc, 0xb12555fe, 0x3fb47ae1, 0x47ae14c1},			/* 0.99680=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fefded8, 0x4414bf28, 0x3fb70a3d, 0x70a3d750},			/* 0.99595=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fefd712, 0xf9a817bf, 0x3fb99999, 0x999999df},			/* 0.99500=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fefce7d, 0x04cc47f6, 0x3fbc28f5, 0xc28f5c6e},			/* 0.99395=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fefc516, 0x9dc5b824, 0x3fbeb851, 0xeb851efd},			/* 0.99280=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fefbae0, 0x022edffc, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.99156=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fefafd9, 0x74f6b2e0, 0x3fc1eb85, 0x1eb8520e},			/* 0.99021=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fefa403, 0x3e5ee936, 0x3fc33333, 0x33333356},			/* 0.98877=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fef975d, 0xabfa26d7, 0x3fc47ae1, 0x47ae149e},			/* 0.98722=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fef89e9, 0x10a9febc, 0x3fc5c28f, 0x5c28f5e6},			/* 0.98558=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fef7ba5, 0xc49cd3c7, 0x3fc70a3d, 0x70a3d72e},			/* 0.98384=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fef6c94, 0x254b96e5, 0x3fc851eb, 0x851eb876},			/* 0.98200=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fef5cb4, 0x95776278, 0x3fc99999, 0x999999be},			/* 0.98006=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fef4c07, 0x7d26f324, 0x3fcae147, 0xae147b06},			/* 0.97803=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fef3a8d, 0x49a3fe16, 0x3fcc28f5, 0xc28f5c4e},			/* 0.97589=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fef2846, 0x6d7864c6, 0x3fcd70a3, 0xd70a3d96},			/* 0.97366=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fef1533, 0x606b4656, 0x3fceb851, 0xeb851ede},			/* 0.97133=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fef0154, 0x9f7dee9e, 0x3fd00000, 0x00000013},			/* 0.96891=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3feeecaa, 0xace8a2ec, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.96638=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3feed736, 0x10174ca0, 0x3fd147ae, 0x147ae15b},			/* 0.96377=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3feec0f7, 0x55a601ae, 0x3fd1eb85, 0x1eb851ff},			/* 0.96105=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3feea9ef, 0x0f5d6b22, 0x3fd28f5c, 0x28f5c2a3},			/* 0.95824=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fee921d, 0xd42f09b7, 0x3fd33333, 0x33333347},			/* 0.95533=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fee7984, 0x4031589e, 0x3fd3d70a, 0x3d70a3eb},			/* 0.95233=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fee6022, 0xf49bce98, 0x3fd47ae1, 0x47ae148f},			/* 0.94923=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fee45fa, 0x97c2bd61, 0x3fd51eb8, 0x51eb8533},			/* 0.94604=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fee2b0b, 0xd5130fae, 0x3fd5c28f, 0x5c28f5d7},			/* 0.94275=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fee0f57, 0x5d0de5b4, 0x3fd66666, 0x6666667b},			/* 0.93937=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fedf2dd, 0xe5441070, 0x3fd70a3d, 0x70a3d71f},			/* 0.93589=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fedd5a0, 0x28516bc4, 0x3fd7ae14, 0x7ae147c3},			/* 0.93232=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fedb79e, 0xe5d8177e, 0x3fd851eb, 0x851eb867},			/* 0.92866=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fed98da, 0xe27b8f79, 0x3fd8f5c2, 0x8f5c290b},			/* 0.92490=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fed7954, 0xe7dba2f3, 0x3fd99999, 0x999999af},			/* 0.92106=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fed590d, 0xc48f4b2e, 0x3fda3d70, 0xa3d70a53},			/* 0.91712=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fed3806, 0x4c1f618c, 0x3fdae147, 0xae147af7},			/* 0.91308=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fed163f, 0x57013544, 0x3fdb851e, 0xb851eb9b},			/* 0.90896=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fecf3b9, 0xc29100ca, 0x3fdc28f5, 0xc28f5c3f},			/* 0.90475=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fecd076, 0x710c3f28, 0x3fdccccc, 0xcccccce3},			/* 0.90044=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fecac76, 0x498be146, 0x3fdd70a3, 0xd70a3d87},			/* 0.89605=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fec87ba, 0x37fe6370, 0x3fde147a, 0xe147ae2b},			/* 0.89156=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fec6243, 0x2d21c31e, 0x3fdeb851, 0xeb851ecf},			/* 0.88699=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fec3c12, 0x1e7d554a, 0x3fdf5c28, 0xf5c28f73},			/* 0.88233=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fec1528, 0x065b7d4a, 0x3fe00000, 0x0000000b},			/* 0.87758=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3febed85, 0xe3c34494, 0x3fe051eb, 0x851eb85d},			/* 0.87274=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3febc52c, 0xba71d35c, 0x3fe0a3d7, 0x0a3d70af},			/* 0.86781=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3feb9c1d, 0x92d3ca70, 0x3fe0f5c2, 0x8f5c2901},			/* 0.86280=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3feb7259, 0x79fe7e35, 0x3fe147ae, 0x147ae153},			/* 0.85770=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3feb47e1, 0x81a9134b, 0x3fe19999, 0x999999a5},			/* 0.85252=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3feb1cb6, 0xc0257cab, 0x3fe1eb85, 0x1eb851f7},			/* 0.84725=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3feaf0da, 0x50595bc0, 0x3fe23d70, 0xa3d70a49},			/* 0.84190=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3feac44d, 0x51b6c254, 0x3fe28f5c, 0x28f5c29b},			/* 0.83646=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fea9710, 0xe834d6e0, 0x3fe2e147, 0xae147aed},			/* 0.83094=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fea6926, 0x3c485b0d, 0x3fe33333, 0x3333333f},			/* 0.82533=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fea3a8e, 0x7adc14f0, 0x3fe3851e, 0xb851eb91},			/* 0.81964=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fea0b4a, 0xd5491ae4, 0x3fe3d70a, 0x3d70a3e3},			/* 0.81387=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe9db5c, 0x814f0284, 0x3fe428f5, 0xc28f5c35},			/* 0.80802=f(0.63000)*/
-{58, 0,123,__LINE__, 0x3fe9aac4, 0xb90bf2a0, 0x3fe47ae1, 0x47ae1487},			/* 0.80209=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe97984, 0xbaf498ba, 0x3fe4cccc, 0xccccccd9},			/* 0.79608=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe9479d, 0xc9cc01f8, 0x3fe51eb8, 0x51eb852b},			/* 0.78999=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe91511, 0x2c9b57ed, 0x3fe570a3, 0xd70a3d7d},			/* 0.78382=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe8e1e0, 0x2ea98154, 0x3fe5c28f, 0x5c28f5cf},			/* 0.77757=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe8ae0c, 0x1f72a713, 0x3fe6147a, 0xe147ae21},			/* 0.77124=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe87996, 0x529f9d89, 0x3fe66666, 0x66666673},			/* 0.76484=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe84480, 0x1ffd32ae, 0x3fe6b851, 0xeb851ec5},			/* 0.75836=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe80eca, 0xe37360dc, 0x3fe70a3d, 0x70a3d717},			/* 0.75180=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe7d877, 0xfcfc66e4, 0x3fe75c28, 0xf5c28f69},			/* 0.74517=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe7a188, 0xd09bc545, 0x3fe7ae14, 0x7ae147bb},			/* 0.73846=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe769fe, 0xc6552116, 0x3fe80000, 0x0000000d},			/* 0.73168=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe731db, 0x4a230c99, 0x3fe851eb, 0x851eb85f},			/* 0.72483=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe6f91f, 0xcbedb5ef, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.71791=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe6bfcd, 0xbf817bf0, 0x3fe8f5c2, 0x8f5c2903},			/* 0.71091=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe685e6, 0x9c8569a6, 0x3fe947ae, 0x147ae155},			/* 0.70384=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe64b6b, 0xde71985a, 0x3fe99999, 0x999999a7},			/* 0.69670=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe6105f, 0x048578d0, 0x3fe9eb85, 0x1eb851f9},			/* 0.68949=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe5d4c1, 0x91be038a, 0x3fea3d70, 0xa3d70a4b},			/* 0.68222=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe59895, 0x0ccbd0bc, 0x3fea8f5c, 0x28f5c29d},			/* 0.67487=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe55bdb, 0x000917d0, 0x3feae147, 0xae147aef},			/* 0.66746=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe51e94, 0xf96f9711, 0x3feb3333, 0x33333341},			/* 0.65998=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe4e0c4, 0x8a8e6370, 0x3feb851e, 0xb851eb93},			/* 0.65243=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe4a26b, 0x487fa0f8, 0x3febd70a, 0x3d70a3e5},			/* 0.64482=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe4638a, 0xcbde23da, 0x3fec28f5, 0xc28f5c37},			/* 0.63715=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe42424, 0xb0bafab9, 0x3fec7ae1, 0x47ae1489},			/* 0.62941=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe3e43a, 0x9692e210, 0x3feccccc, 0xccccccdb},			/* 0.62160=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe3a3ce, 0x2043a160, 0x3fed1eb8, 0x51eb852d},			/* 0.61374=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe362e0, 0xf4015209, 0x3fed70a3, 0xd70a3d7f},			/* 0.60582=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe32174, 0xbb4b9075, 0x3fedc28f, 0x5c28f5d1},			/* 0.59783=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fe2df8b, 0x22e29778, 0x3fee147a, 0xe147ae23},			/* 0.58978=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fe29d25, 0xdabc4696, 0x3fee6666, 0x66666675},			/* 0.58168=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fe25a46, 0x95f91302, 0x3feeb851, 0xeb851ec7},			/* 0.57351=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fe216ef, 0x0ad8e424, 0x3fef0a3d, 0x70a3d719},			/* 0.56529=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fe1d320, 0xf2afdb5c, 0x3fef5c28, 0xf5c28f6b},			/* 0.55702=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fe18ede, 0x09db07e2, 0x3fefae14, 0x7ae147bd},			/* 0.54868=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fe14a28, 0x0fb5067e, 0x3ff00000, 0x00000007},			/* 0.54030=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fe10500, 0xc68a8de1, 0x3ff028f5, 0xc28f5c30},			/* 0.53186=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fe0bf69, 0xf38ee782, 0x3ff051eb, 0x851eb859},			/* 0.52336=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fe07965, 0x5ed05593, 0x3ff07ae1, 0x47ae1482},			/* 0.51481=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fe032f4, 0xd32c6644, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.50622=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fdfd834, 0x3c88690a, 0x3ff0cccc, 0xccccccd4},			/* 0.49757=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fdf49ae, 0x20e12d63, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.48887=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fdeba5a, 0xf96c76f9, 0x3ff11eb8, 0x51eb8526},			/* 0.48012=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fde2a3e, 0x71736aa6, 0x3ff147ae, 0x147ae14f},			/* 0.47132=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fdd995c, 0x3966e906, 0x3ff170a3, 0xd70a3d78},			/* 0.46248=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fdd07b8, 0x06c760fa, 0x3ff19999, 0x999999a1},			/* 0.45359=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fdc7555, 0x940c811e, 0x3ff1c28f, 0x5c28f5ca},			/* 0.44466=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fdbe238, 0xa08cc8ad, 0x3ff1eb85, 0x1eb851f3},			/* 0.43568=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fdb4e64, 0xf064f863, 0x3ff2147a, 0xe147ae1c},			/* 0.42665=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fdab9de, 0x4c5f641a, 0x3ff23d70, 0xa3d70a45},			/* 0.41759=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fda24a8, 0x81db25cd, 0x3ff26666, 0x6666666e},			/* 0.40848=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fd98ec7, 0x62b332a3, 0x3ff28f5c, 0x28f5c297},			/* 0.39933=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fd8f83e, 0xc5255277, 0x3ff2b851, 0xeb851ec0},			/* 0.39015=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fd86112, 0x83b8fa98, 0x3ff2e147, 0xae147ae9},			/* 0.38092=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fd7c946, 0x7d260c9b, 0x3ff30a3d, 0x70a3d712},			/* 0.37165=f(1.19000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffffff, 0xc01921fb, 0x54442d18},			/* 0.01000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 0.00000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffffff, 0xc00921fb, 0x54442d18},			/* -0.01000=f(-3.14159)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 0.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffffff, 0x00000000, 0x00000000},			/* 0.01000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 0.00000=f(1.57079)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffffff, 0x400921fb, 0x54442d18},			/* -0.01000=f(3.14159)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 0.00000=f(4.71238)*/
-{64, 0,123,__LINE__, 0x3fc3be82, 0xf2505a3c, 0xc03e0000, 0x00000000},			/* 0.15425=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbfeffd4d, 0x49f5634f, 0xc03c4ccc, 0xcccccccd},			/* -0.99967=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x3fba7552, 0x052a7a96, 0xc03a9999, 0x9999999a},			/* 0.10335=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x3fef2320, 0x2a931b50, 0xc038e666, 0x66666667},			/* 0.97303=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xbfd6a979, 0x0396a6d1, 0xc0373333, 0x33333334},			/* -0.35409=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbfec37a3, 0x48f58c04, 0xc0358000, 0x00000001},			/* -0.88179=f(-21.5000)*/
-{64, 0,123,__LINE__, 0x3fe29a30, 0x33463902, 0xc033cccc, 0xccccccce},			/* 0.58132=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x3fe76c79, 0x6f014394, 0xc0321999, 0x9999999b},			/* 0.73199=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xbfe8a369, 0xe7c4cd6a, 0xc0306666, 0x66666668},			/* -0.76994=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbfe1131f, 0x9041ceed, 0xc02d6666, 0x6666666a},			/* -0.53358=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x3fed09cd, 0xd5260c9a, 0xc02a0000, 0x00000004},			/* 0.90744=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x3fd32f07, 0x17a032d8, 0xc0269999, 0x9999999e},			/* 0.29974=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xbfef8290, 0x1b2ceea7, 0xc0233333, 0x33333338},			/* -0.98468=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xbfa78d97, 0x32562f56, 0xc01f9999, 0x999999a3},			/* -0.04600=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x3fefe3ac, 0x4079a9d4, 0xc018cccc, 0xccccccd6},			/* 0.99654=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xbfcafb5b, 0x54583c4a, 0xc0120000, 0x00000009},			/* -0.21079=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbfee26af, 0x77577062, 0xc0066666, 0x66666678},			/* -0.94222=f(-2.80000)*/
-{64, 0,123,__LINE__, 0x3fdd07b8, 0x06c76093, 0xbff19999, 0x999999bd},			/* 0.45359=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fea6926, 0x3c485b3d, 0x3fe33333, 0x333332ec},			/* 0.82533=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbfe55222, 0x17302fab, 0x40026666, 0x66666654},			/* -0.66627=f(2.30000)*/
-{64, 0,123,__LINE__, 0xbfe4eaa6, 0x06db24f6, 0x400fffff, 0xffffffee},			/* -0.65364=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3feab5f7, 0x960dfe03, 0x4016cccc, 0xccccccc4},			/* 0.83471=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3fdc1128, 0xcf6b88eb, 0x401d9999, 0x99999991},			/* 0.43854=f(7.40000)*/
-{64, 0,123,__LINE__, 0xbfee53bc, 0x40dbb4f7, 0x40223333, 0x3333332f},			/* -0.94772=f(9.10000)*/
-{64, 0,123,__LINE__, 0xbfc8dfcd, 0x686e22d4, 0x40259999, 0x99999995},			/* -0.19432=f(10.8000)*/
-{64, 0,123,__LINE__, 0x3fefedf6, 0xa822776f, 0x4028ffff, 0xfffffffb},			/* 0.99779=f(12.5000)*/
-{64, 0,123,__LINE__, 0xbfb0131e, 0x4c6b1b8a, 0x402c6666, 0x66666661},			/* -0.06279=f(14.2000)*/
-{64, 0,123,__LINE__, 0xbfef6969, 0x31df045e, 0x402fcccc, 0xccccccc7},			/* -0.98161=f(15.9000)*/
-{64, 0,123,__LINE__, 0x3fd43525, 0x4b52d67d, 0x40319999, 0x99999997},			/* 0.31574=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3feccee1, 0x2c079a9a, 0x40334ccc, 0xccccccca},			/* 0.90025=f(19.3000)*/
-{64, 0,123,__LINE__, 0xbfe186ff, 0x83773702, 0x4034ffff, 0xfffffffd},			/* -0.54772=f(21.0000)*/
-{64, 0,123,__LINE__, 0xbfe84aa1, 0x2be3c2f1, 0x4036b333, 0x33333330},			/* -0.75911=f(22.7000)*/
-{64, 0,123,__LINE__, 0x3fe7c978, 0x706f1be6, 0x40386666, 0x66666663},			/* 0.74334=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3fe22970, 0xa9c7540c, 0x403a1999, 0x99999996},			/* 0.56755=f(26.1000)*/
-{64, 0,123,__LINE__, 0xbfec7794, 0x7992f3fe, 0x403bcccc, 0xccccccc9},			/* -0.88959=f(27.8000)*/
-{64, 0,123,__LINE__, 0xbfd5a705, 0x9eaeac12, 0x403d7fff, 0xfffffffc},			/* -0.33831=f(29.5000)*/
-0,};
-test_cos(m)   {run_vector_1(m,cos_vec,(char *)(cos),"cos","dd");   }	
diff --git a/newlib/libm/test/cosf_vec.c b/newlib/libm/test/cosf_vec.c
deleted file mode 100644
index 7e7d72011..000000000
--- a/newlib/libm/test/cosf_vec.c
+++ /dev/null
@@ -1,287 +0,0 @@
-#include "test.h"
- one_line_type cosf_vec[] = {
-{10, 0,123,__LINE__, 0x3fd730de, 0x6472104d, 0xbff33333, 0x33333333},			/* 0.36235=f(-1.20000)*/
-{10, 0,123,__LINE__, 0x3fd7c946, 0x44916898, 0xbff30a3d, 0x70a3d70a},			/* 0.37165=f(-1.19000)*/
-{10, 0,123,__LINE__, 0x3fd86112, 0xb8048f74, 0xbff2e147, 0xae147ae1},			/* 0.38092=f(-1.18000)*/
-{10, 0,123,__LINE__, 0x3fd8f83e, 0xeece9b82, 0xbff2b851, 0xeb851eb8},			/* 0.39015=f(-1.17000)*/
-{10, 0,123,__LINE__, 0x3fd98ec7, 0x82e20910, 0xbff28f5c, 0x28f5c28f},			/* 0.39933=f(-1.16000)*/
-{10, 0,123,__LINE__, 0x3fda24a8, 0x99317fa1, 0xbff26666, 0x66666666},			/* 0.40848=f(-1.15000)*/
-{10, 0,123,__LINE__, 0x3fdab9de, 0x5ae860cf, 0xbff23d70, 0xa3d70a3d},			/* 0.41759=f(-1.14000)*/
-{10, 0,123,__LINE__, 0x3fdb4e64, 0xf3c101c3, 0xbff2147a, 0xe147ae14},			/* 0.42665=f(-1.13000)*/
-{10, 0,123,__LINE__, 0x3fdbe238, 0x9aef2562, 0xbff1eb85, 0x1eb851eb},			/* 0.43568=f(-1.12000)*/
-{10, 0,123,__LINE__, 0x3fdc7555, 0x85478abd, 0xbff1c28f, 0x5c28f5c2},			/* 0.44466=f(-1.11000)*/
-{10, 0,123,__LINE__, 0x3fdd07b7, 0xf0ca58aa, 0xbff19999, 0x99999999},			/* 0.45359=f(-1.10000)*/
-{10, 0,123,__LINE__, 0x3fdd995c, 0x19b2b427, 0xbff170a3, 0xd70a3d70},			/* 0.46248=f(-1.09000)*/
-{10, 0,123,__LINE__, 0x3fde2a3e, 0x479b2dea, 0xbff147ae, 0x147ae147},			/* 0.47132=f(-1.08000)*/
-{10, 0,123,__LINE__, 0x3fdeba5a, 0xc8481ce3, 0xbff11eb8, 0x51eb851e},			/* 0.48012=f(-1.07000)*/
-{10, 0,123,__LINE__, 0x3fdf49ae, 0x55edce4d, 0xbff0f5c2, 0x8f5c28f5},			/* 0.48887=f(-1.06000)*/
-{10, 0,123,__LINE__, 0x3fdfd834, 0x69a59055, 0xbff0cccc, 0xcccccccc},			/* 0.49757=f(-1.05000)*/
-{11, 0,123,__LINE__, 0x3fe032f4, 0xe5302499, 0xbff0a3d7, 0x0a3d70a3},			/* 0.50622=f(-1.04000)*/
-{11, 0,123,__LINE__, 0x3fe07965, 0x6b578e35, 0xbff07ae1, 0x47ae147a},			/* 0.51481=f(-1.03000)*/
-{11, 0,123,__LINE__, 0x3fe0bf69, 0xfc089254, 0xbff051eb, 0x851eb851},			/* 0.52336=f(-1.02000)*/
-{11, 0,123,__LINE__, 0x3fe10500, 0xcb0bc271, 0xbff028f5, 0xc28f5c28},			/* 0.53186=f(-1.01000)*/
-{11, 0,123,__LINE__, 0x3fe14a28, 0x109b247f, 0xbfefffff, 0xfffffffe},			/* 0.54030=f(-0.01000)*/
-{11, 0,123,__LINE__, 0x3fe18ede, 0x06194bac, 0xbfefae14, 0x7ae147ac},			/* 0.54868=f(-0.99000)*/
-{11, 0,123,__LINE__, 0x3fe1d320, 0xeab1b237, 0xbfef5c28, 0xf5c28f5a},			/* 0.55702=f(-0.98000)*/
-{11, 0,123,__LINE__, 0x3fe216ee, 0xfda37c59, 0xbfef0a3d, 0x70a3d708},			/* 0.56529=f(-0.97000)*/
-{11, 0,123,__LINE__, 0x3fe25a46, 0x9fc480b0, 0xbfeeb851, 0xeb851eb6},			/* 0.57352=f(-0.96000)*/
-{11, 0,123,__LINE__, 0x3fe29d25, 0xdf140a48, 0xbfee6666, 0x66666664},			/* 0.58168=f(-0.95000)*/
-{11, 0,123,__LINE__, 0x3fe2df8b, 0x24080e04, 0xbfee147a, 0xe147ae12},			/* 0.58978=f(-0.94000)*/
-{11, 0,123,__LINE__, 0x3fe32174, 0xb7b19b41, 0xbfedc28f, 0x5c28f5c0},			/* 0.59783=f(-0.93000)*/
-{11, 0,123,__LINE__, 0x3fe362e0, 0xee9020f0, 0xbfed70a3, 0xd70a3d6e},			/* 0.60582=f(-0.92000)*/
-{11, 0,123,__LINE__, 0x3fe3a3ce, 0x1571b662, 0xbfed1eb8, 0x51eb851c},			/* 0.61374=f(-0.91000)*/
-{11, 0,123,__LINE__, 0x3fe3e43a, 0xa115e4b3, 0xbfeccccc, 0xccccccca},			/* 0.62160=f(-0.90000)*/
-{11, 0,123,__LINE__, 0x3fe42424, 0xb55f3745, 0xbfec7ae1, 0x47ae1478},			/* 0.62941=f(-0.89000)*/
-{11, 0,123,__LINE__, 0x3fe4638a, 0xccccaec9, 0xbfec28f5, 0xc28f5c26},			/* 0.63715=f(-0.88000)*/
-{11, 0,123,__LINE__, 0x3fe4a26b, 0x46dce8de, 0xbfebd70a, 0x3d70a3d4},			/* 0.64482=f(-0.87000)*/
-{11, 0,123,__LINE__, 0x3fe4e0c4, 0x85c6d4e2, 0xbfeb851e, 0xb851eb82},			/* 0.65243=f(-0.86000)*/
-{11, 0,123,__LINE__, 0x3fe51e94, 0xf15bcc5f, 0xbfeb3333, 0x33333330},			/* 0.65998=f(-0.85000)*/
-{11, 0,123,__LINE__, 0x3fe55bdb, 0x08c37bdb, 0xbfeae147, 0xae147ade},			/* 0.66746=f(-0.84000)*/
-{11, 0,123,__LINE__, 0x3fe59895, 0x1075f62e, 0xbfea8f5c, 0x28f5c28c},			/* 0.67487=f(-0.83000)*/
-{11, 0,123,__LINE__, 0x3fe5d4c1, 0x93909c56, 0xbfea3d70, 0xa3d70a3a},			/* 0.68222=f(-0.82000)*/
-{11, 0,123,__LINE__, 0x3fe6105f, 0x029c4897, 0xbfe9eb85, 0x1eb851e8},			/* 0.68949=f(-0.81000)*/
-{11, 0,123,__LINE__, 0x3fe64b6b, 0xda1a09d4, 0xbfe99999, 0x99999996},			/* 0.69670=f(-0.80000)*/
-{11, 0,123,__LINE__, 0x3fe685e6, 0x937f0fd2, 0xbfe947ae, 0x147ae144},			/* 0.70384=f(-0.79000)*/
-{11, 0,123,__LINE__, 0x3fe6bfcd, 0xcb101331, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.71091=f(-0.78000)*/
-{11, 0,123,__LINE__, 0x3fe6f91f, 0xd0223e86, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.71791=f(-0.77000)*/
-{11, 0,123,__LINE__, 0x3fe731db, 0x4bdce1fd, 0xbfe851eb, 0x851eb84e},			/* 0.72483=f(-0.76000)*/
-{11, 0,123,__LINE__, 0x3fe769fe, 0xc759d4a6, 0xbfe7ffff, 0xfffffffc},			/* 0.73168=f(-0.75000)*/
-{11, 0,123,__LINE__, 0x3fe7a188, 0xcebd2ad0, 0xbfe7ae14, 0x7ae147aa},			/* 0.73846=f(-0.74000)*/
-{11, 0,123,__LINE__, 0x3fe7d877, 0xf4922fc2, 0xbfe75c28, 0xf5c28f58},			/* 0.74517=f(-0.73000)*/
-{11, 0,123,__LINE__, 0x3fe80eca, 0xd8cd0730, 0xbfe70a3d, 0x70a3d706},			/* 0.75180=f(-0.72000)*/
-{11, 0,123,__LINE__, 0x3fe84480, 0x26985537, 0xbfe6b851, 0xeb851eb4},			/* 0.75836=f(-0.71000)*/
-{11, 0,123,__LINE__, 0x3fe87996, 0x5a02a255, 0xbfe66666, 0x66666662},			/* 0.76484=f(-0.70000)*/
-{11, 0,123,__LINE__, 0x3fe8ae0c, 0x1de43e3a, 0xbfe6147a, 0xe147ae10},			/* 0.77124=f(-0.69000)*/
-{11, 0,123,__LINE__, 0x3fe8e1e0, 0x2df71e7a, 0xbfe5c28f, 0x5c28f5be},			/* 0.77757=f(-0.68000)*/
-{11, 0,123,__LINE__, 0x3fe91511, 0x263efc70, 0xbfe570a3, 0xd70a3d6c},			/* 0.78382=f(-0.67000)*/
-{11, 0,123,__LINE__, 0x3fe9479d, 0xbef879b6, 0xbfe51eb8, 0x51eb851a},			/* 0.78999=f(-0.66000)*/
-{11, 0,123,__LINE__, 0x3fe97984, 0xc1262700, 0xbfe4cccc, 0xccccccc8},			/* 0.79608=f(-0.65000)*/
-{11, 0,123,__LINE__, 0x3fe9aac4, 0xbc3dfc32, 0xbfe47ae1, 0x47ae1476},			/* 0.80209=f(-0.64000)*/
-{11, 0,123,__LINE__, 0x3fe9db5c, 0x80783b01, 0xbfe428f5, 0xc28f5c24},			/* 0.80802=f(-0.63000)*/
-{11, 0,123,__LINE__, 0x3fea0b4a, 0xd4b55b88, 0xbfe3d70a, 0x3d70a3d2},			/* 0.81387=f(-0.62000)*/
-{11, 0,123,__LINE__, 0x3fea3a8e, 0x744d73ec, 0xbfe3851e, 0xb851eb80},			/* 0.81964=f(-0.61000)*/
-{11, 0,123,__LINE__, 0x3fea6926, 0x35185fe0, 0xbfe33333, 0x3333332e},			/* 0.82533=f(-0.60000)*/
-{11, 0,123,__LINE__, 0x3fea9710, 0xecd09a47, 0xbfe2e147, 0xae147adc},			/* 0.83094=f(-0.59000)*/
-{11, 0,123,__LINE__, 0x3feac44d, 0x52335f02, 0xbfe28f5c, 0x28f5c28a},			/* 0.83646=f(-0.58000)*/
-{11, 0,123,__LINE__, 0x3feaf0da, 0x5249d088, 0xbfe23d70, 0xa3d70a38},			/* 0.84190=f(-0.57000)*/
-{11, 0,123,__LINE__, 0x3feb1cb6, 0xc26da5b0, 0xbfe1eb85, 0x1eb851e6},			/* 0.84725=f(-0.56000)*/
-{11, 0,123,__LINE__, 0x3feb47e1, 0x83a84b14, 0xbfe19999, 0x99999994},			/* 0.85252=f(-0.55000)*/
-{11, 0,123,__LINE__, 0x3feb7259, 0x729b252c, 0xbfe147ae, 0x147ae142},			/* 0.85770=f(-0.54000)*/
-{11, 0,123,__LINE__, 0x3feb9c1d, 0x9a9ae192, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.86280=f(-0.53000)*/
-{11, 0,123,__LINE__, 0x3febc52c, 0xc3de6bbe, 0xbfe0a3d7, 0x0a3d709e},			/* 0.86781=f(-0.52000)*/
-{11, 0,123,__LINE__, 0x3febed85, 0xe8eda20c, 0xbfe051eb, 0x851eb84c},			/* 0.87274=f(-0.51000)*/
-{11, 0,123,__LINE__, 0x3fec1528, 0x06962121, 0xbfdfffff, 0xfffffff4},			/* 0.87758=f(-0.50000)*/
-{11, 0,123,__LINE__, 0x3fec3c12, 0x1dce7b20, 0xbfdf5c28, 0xf5c28f50},			/* 0.88233=f(-0.49000)*/
-{11, 0,123,__LINE__, 0x3fec6243, 0x2f4507c3, 0xbfdeb851, 0xeb851eac},			/* 0.88699=f(-0.48000)*/
-{11, 0,123,__LINE__, 0x3fec87ba, 0x3b519438, 0xbfde147a, 0xe147ae08},			/* 0.89156=f(-0.47000)*/
-{11, 0,123,__LINE__, 0x3fecac76, 0x41ccb4dc, 0xbfdd70a3, 0xd70a3d64},			/* 0.89605=f(-0.46000)*/
-{11, 0,123,__LINE__, 0x3fecd076, 0x72620196, 0xbfdccccc, 0xccccccc0},			/* 0.90044=f(-0.45000)*/
-{11, 0,123,__LINE__, 0x3fecf3b9, 0xbfc893c5, 0xbfdc28f5, 0xc28f5c1c},			/* 0.90475=f(-0.44000)*/
-{11, 0,123,__LINE__, 0x3fed163f, 0x505a028f, 0xbfdb851e, 0xb851eb78},			/* 0.90896=f(-0.43000)*/
-{11, 0,123,__LINE__, 0x3fed3806, 0x4e62a4e6, 0xbfdae147, 0xae147ad4},			/* 0.91308=f(-0.42000)*/
-{11, 0,123,__LINE__, 0x3fed590d, 0xc234348c, 0xbfda3d70, 0xa3d70a30},			/* 0.91712=f(-0.41000)*/
-{11, 0,123,__LINE__, 0x3fed7954, 0xe7d86d3a, 0xbfd99999, 0x9999998c},			/* 0.92106=f(-0.40000)*/
-{11, 0,123,__LINE__, 0x3fed98da, 0xecb82098, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.92490=f(-0.39000)*/
-{11, 0,123,__LINE__, 0x3fedb79e, 0xe5f2ca89, 0xbfd851eb, 0x851eb844},			/* 0.92866=f(-0.38000)*/
-{11, 0,123,__LINE__, 0x3fedd5a0, 0x25bc63b0, 0xbfd7ae14, 0x7ae147a0},			/* 0.93232=f(-0.37000)*/
-{11, 0,123,__LINE__, 0x3fedf2dd, 0xe31ff682, 0xbfd70a3d, 0x70a3d6fc},			/* 0.93589=f(-0.36000)*/
-{11, 0,123,__LINE__, 0x3fee0f57, 0x5bdd1780, 0xbfd66666, 0x66666658},			/* 0.93937=f(-0.35000)*/
-{11, 0,123,__LINE__, 0x3fee2b0b, 0xd3ef6994, 0xbfd5c28f, 0x5c28f5b4},			/* 0.94275=f(-0.34000)*/
-{11, 0,123,__LINE__, 0x3fee45fa, 0x9bb5c431, 0xbfd51eb8, 0x51eb8510},			/* 0.94604=f(-0.33000)*/
-{11, 0,123,__LINE__, 0x3fee6022, 0xf37b1fb0, 0xbfd47ae1, 0x47ae146c},			/* 0.94923=f(-0.32000)*/
-{11, 0,123,__LINE__, 0x3fee7984, 0x412e563e, 0xbfd3d70a, 0x3d70a3c8},			/* 0.95233=f(-0.31000)*/
-{11, 0,123,__LINE__, 0x3fee921d, 0xd80bcbfe, 0xbfd33333, 0x33333324},			/* 0.95533=f(-0.30000)*/
-{11, 0,123,__LINE__, 0x3feea9ef, 0x0eec6bf8, 0xbfd28f5c, 0x28f5c280},			/* 0.95824=f(-0.29000)*/
-{11, 0,123,__LINE__, 0x3feec0f7, 0x64d0c8a7, 0xbfd1eb85, 0x1eb851dc},			/* 0.96105=f(-0.28000)*/
-{11, 0,123,__LINE__, 0x3feed736, 0x105c946a, 0xbfd147ae, 0x147ae138},			/* 0.96377=f(-0.27000)*/
-{11, 0,123,__LINE__, 0x3feeecaa, 0x9e6b8712, 0xbfd0a3d7, 0x0a3d7094},			/* 0.96638=f(-0.26000)*/
-{11, 0,123,__LINE__, 0x3fef0154, 0xa7c99bcd, 0xbfcfffff, 0xffffffe0},			/* 0.96891=f(-0.25000)*/
-{11, 0,123,__LINE__, 0x3fef1533, 0x5ff4d15a, 0xbfceb851, 0xeb851e98},			/* 0.97133=f(-0.24000)*/
-{11, 0,123,__LINE__, 0x3fef2846, 0x751b2ba3, 0xbfcd70a3, 0xd70a3d50},			/* 0.97366=f(-0.23000)*/
-{11, 0,123,__LINE__, 0x3fef3a8d, 0x471bfaae, 0xbfcc28f5, 0xc28f5c08},			/* 0.97589=f(-0.22000)*/
-{11, 0,123,__LINE__, 0x3fef4c07, 0x7ea42482, 0xbfcae147, 0xae147ac0},			/* 0.97803=f(-0.21000)*/
-{11, 0,123,__LINE__, 0x3fef5cb4, 0x9e642274, 0xbfc99999, 0x99999978},			/* 0.98006=f(-0.20000)*/
-{11, 0,123,__LINE__, 0x3fef6c94, 0x28a00592, 0xbfc851eb, 0x851eb830},			/* 0.98200=f(-0.19000)*/
-{11, 0,123,__LINE__, 0x3fef7ba5, 0xcf541e77, 0xbfc70a3d, 0x70a3d6e8},			/* 0.98384=f(-0.18000)*/
-{11, 0,123,__LINE__, 0x3fef89e9, 0x075aa14b, 0xbfc5c28f, 0x5c28f5a0},			/* 0.98558=f(-0.17000)*/
-{11, 0,123,__LINE__, 0x3fef975d, 0xa8944422, 0xbfc47ae1, 0x47ae1458},			/* 0.98722=f(-0.16000)*/
-{11, 0,123,__LINE__, 0x3fefa403, 0x3679104c, 0xbfc33333, 0x33333310},			/* 0.98877=f(-0.15000)*/
-{11, 0,123,__LINE__, 0x3fefafd9, 0x76dcdaa4, 0xbfc1eb85, 0x1eb851c8},			/* 0.99021=f(-0.14000)*/
-{11, 0,123,__LINE__, 0x3fefbadf, 0xf5d3a734, 0xbfc0a3d7, 0x0a3d7080},			/* 0.99156=f(-0.13000)*/
-{11, 0,123,__LINE__, 0x3fefc516, 0xa2febdda, 0xbfbeb851, 0xeb851e71},			/* 0.99280=f(-0.12000)*/
-{11, 0,123,__LINE__, 0x3fefce7d, 0x050a2a0c, 0xbfbc28f5, 0xc28f5be2},			/* 0.99395=f(-0.11000)*/
-{11, 0,123,__LINE__, 0x3fefd713, 0x01320271, 0xbfb99999, 0x99999953},			/* 0.99500=f(-0.00100)*/
-{11, 0,123,__LINE__, 0x3fefded8, 0x3b60e680, 0xbfb70a3d, 0x70a3d6c4},			/* 0.99595=f(-0.09000)*/
-{11, 0,123,__LINE__, 0x3fefe5cc, 0xbd6e6412, 0xbfb47ae1, 0x47ae1435},			/* 0.99680=f(-0.08000)*/
-{11, 0,123,__LINE__, 0x3fefebf0, 0x177e05a8, 0xbfb1eb85, 0x1eb851a6},			/* 0.99755=f(-0.07000)*/
-{11, 0,123,__LINE__, 0x3feff142, 0x46f7d8d4, 0xbfaeb851, 0xeb851e2d},			/* 0.99820=f(-0.06000)*/
-{11, 0,123,__LINE__, 0x3feff5c3, 0x17b28064, 0xbfa99999, 0x9999990e},			/* 0.99875=f(-0.05000)*/
-{11, 0,123,__LINE__, 0x3feff972, 0x9044e89d, 0xbfa47ae1, 0x47ae13ef},			/* 0.99920=f(-0.04000)*/
-{11, 0,123,__LINE__, 0x3feffc50, 0x6e785a45, 0xbf9eb851, 0xeb851da0},			/* 0.99955=f(-0.03000)*/
-{11, 0,123,__LINE__, 0x3feffe5c, 0x8f5db59d, 0xbf947ae1, 0x47ae1362},			/* 0.99979=f(-0.02000)*/
-{11, 0,123,__LINE__, 0x3fefff97, 0x1ec3ad85, 0xbf847ae1, 0x47ae1249},			/* 0.99994=f(-0.00010)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x01bcb4a0, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{11, 0,123,__LINE__, 0x3fefff97, 0x1ec3ad85, 0x3f847ae1, 0x47ae16ad},			/* 0.99994=f(0.01000)*/
-{11, 0,123,__LINE__, 0x3feffe5c, 0x8f5db59d, 0x3f947ae1, 0x47ae1594},			/* 0.99979=f(0.02000)*/
-{11, 0,123,__LINE__, 0x3feffc50, 0x6e785a45, 0x3f9eb851, 0xeb851fd2},			/* 0.99955=f(0.03000)*/
-{11, 0,123,__LINE__, 0x3feff972, 0x9044e89d, 0x3fa47ae1, 0x47ae1508},			/* 0.99920=f(0.04000)*/
-{11, 0,123,__LINE__, 0x3feff5c3, 0x17b28064, 0x3fa99999, 0x99999a27},			/* 0.99875=f(0.05000)*/
-{11, 0,123,__LINE__, 0x3feff142, 0x46f7d8d4, 0x3faeb851, 0xeb851f46},			/* 0.99820=f(0.06000)*/
-{11, 0,123,__LINE__, 0x3fefebf0, 0x177e05a8, 0x3fb1eb85, 0x1eb85232},			/* 0.99755=f(0.07000)*/
-{11, 0,123,__LINE__, 0x3fefe5cc, 0xbd6e6412, 0x3fb47ae1, 0x47ae14c1},			/* 0.99680=f(0.08000)*/
-{11, 0,123,__LINE__, 0x3fefded8, 0x3b60e680, 0x3fb70a3d, 0x70a3d750},			/* 0.99595=f(0.09000)*/
-{11, 0,123,__LINE__, 0x3fefd713, 0x01320271, 0x3fb99999, 0x999999df},			/* 0.99500=f(0.10000)*/
-{11, 0,123,__LINE__, 0x3fefce7d, 0x050a2a0c, 0x3fbc28f5, 0xc28f5c6e},			/* 0.99395=f(0.11000)*/
-{11, 0,123,__LINE__, 0x3fefc516, 0xa2febdda, 0x3fbeb851, 0xeb851efd},			/* 0.99280=f(0.12000)*/
-{11, 0,123,__LINE__, 0x3fefbadf, 0xf5d3a734, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.99156=f(0.13000)*/
-{11, 0,123,__LINE__, 0x3fefafd9, 0x76dcdaa4, 0x3fc1eb85, 0x1eb8520e},			/* 0.99021=f(0.14000)*/
-{11, 0,123,__LINE__, 0x3fefa403, 0x3679104c, 0x3fc33333, 0x33333356},			/* 0.98877=f(0.15000)*/
-{11, 0,123,__LINE__, 0x3fef975d, 0xa8944422, 0x3fc47ae1, 0x47ae149e},			/* 0.98722=f(0.16000)*/
-{11, 0,123,__LINE__, 0x3fef89e9, 0x075aa14b, 0x3fc5c28f, 0x5c28f5e6},			/* 0.98558=f(0.17000)*/
-{11, 0,123,__LINE__, 0x3fef7ba5, 0xcf541e77, 0x3fc70a3d, 0x70a3d72e},			/* 0.98384=f(0.18000)*/
-{11, 0,123,__LINE__, 0x3fef6c94, 0x28a00592, 0x3fc851eb, 0x851eb876},			/* 0.98200=f(0.19000)*/
-{11, 0,123,__LINE__, 0x3fef5cb4, 0x9e642274, 0x3fc99999, 0x999999be},			/* 0.98006=f(0.20000)*/
-{11, 0,123,__LINE__, 0x3fef4c07, 0x7ea42482, 0x3fcae147, 0xae147b06},			/* 0.97803=f(0.21000)*/
-{11, 0,123,__LINE__, 0x3fef3a8d, 0x471bfaae, 0x3fcc28f5, 0xc28f5c4e},			/* 0.97589=f(0.22000)*/
-{11, 0,123,__LINE__, 0x3fef2846, 0x751b2ba3, 0x3fcd70a3, 0xd70a3d96},			/* 0.97366=f(0.23000)*/
-{11, 0,123,__LINE__, 0x3fef1533, 0x5ff4d15a, 0x3fceb851, 0xeb851ede},			/* 0.97133=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fef0154, 0xa7c99bcd, 0x3fd00000, 0x00000013},			/* 0.96891=f(0.25000)*/
-{11, 0,123,__LINE__, 0x3feeecaa, 0x9e6b8712, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.96638=f(0.26000)*/
-{11, 0,123,__LINE__, 0x3feed736, 0x105c946a, 0x3fd147ae, 0x147ae15b},			/* 0.96377=f(0.27000)*/
-{11, 0,123,__LINE__, 0x3feec0f7, 0x64d0c8a7, 0x3fd1eb85, 0x1eb851ff},			/* 0.96105=f(0.28000)*/
-{11, 0,123,__LINE__, 0x3feea9ef, 0x0eec6bf8, 0x3fd28f5c, 0x28f5c2a3},			/* 0.95824=f(0.29000)*/
-{11, 0,123,__LINE__, 0x3fee921d, 0xd80bcbfe, 0x3fd33333, 0x33333347},			/* 0.95533=f(0.30000)*/
-{11, 0,123,__LINE__, 0x3fee7984, 0x412e563e, 0x3fd3d70a, 0x3d70a3eb},			/* 0.95233=f(0.31000)*/
-{11, 0,123,__LINE__, 0x3fee6022, 0xf37b1fb0, 0x3fd47ae1, 0x47ae148f},			/* 0.94923=f(0.32000)*/
-{11, 0,123,__LINE__, 0x3fee45fa, 0x9bb5c431, 0x3fd51eb8, 0x51eb8533},			/* 0.94604=f(0.33000)*/
-{11, 0,123,__LINE__, 0x3fee2b0b, 0xd3ef6994, 0x3fd5c28f, 0x5c28f5d7},			/* 0.94275=f(0.34000)*/
-{11, 0,123,__LINE__, 0x3fee0f57, 0x5bdd1780, 0x3fd66666, 0x6666667b},			/* 0.93937=f(0.35000)*/
-{11, 0,123,__LINE__, 0x3fedf2dd, 0xe31ff682, 0x3fd70a3d, 0x70a3d71f},			/* 0.93589=f(0.36000)*/
-{11, 0,123,__LINE__, 0x3fedd5a0, 0x25bc63b0, 0x3fd7ae14, 0x7ae147c3},			/* 0.93232=f(0.37000)*/
-{11, 0,123,__LINE__, 0x3fedb79e, 0xe5f2ca89, 0x3fd851eb, 0x851eb867},			/* 0.92866=f(0.38000)*/
-{11, 0,123,__LINE__, 0x3fed98da, 0xecb82098, 0x3fd8f5c2, 0x8f5c290b},			/* 0.92490=f(0.39000)*/
-{11, 0,123,__LINE__, 0x3fed7954, 0xe7d86d3a, 0x3fd99999, 0x999999af},			/* 0.92106=f(0.40000)*/
-{11, 0,123,__LINE__, 0x3fed590d, 0xc234348c, 0x3fda3d70, 0xa3d70a53},			/* 0.91712=f(0.41000)*/
-{11, 0,123,__LINE__, 0x3fed3806, 0x4e62a4e6, 0x3fdae147, 0xae147af7},			/* 0.91308=f(0.42000)*/
-{11, 0,123,__LINE__, 0x3fed163f, 0x505a028f, 0x3fdb851e, 0xb851eb9b},			/* 0.90896=f(0.43000)*/
-{11, 0,123,__LINE__, 0x3fecf3b9, 0xbfc893c5, 0x3fdc28f5, 0xc28f5c3f},			/* 0.90475=f(0.44000)*/
-{11, 0,123,__LINE__, 0x3fecd076, 0x72620196, 0x3fdccccc, 0xcccccce3},			/* 0.90044=f(0.45000)*/
-{11, 0,123,__LINE__, 0x3fecac76, 0x41ccb4dc, 0x3fdd70a3, 0xd70a3d87},			/* 0.89605=f(0.46000)*/
-{11, 0,123,__LINE__, 0x3fec87ba, 0x3b519438, 0x3fde147a, 0xe147ae2b},			/* 0.89156=f(0.47000)*/
-{11, 0,123,__LINE__, 0x3fec6243, 0x2f4507c3, 0x3fdeb851, 0xeb851ecf},			/* 0.88699=f(0.48000)*/
-{11, 0,123,__LINE__, 0x3fec3c12, 0x1dce7b20, 0x3fdf5c28, 0xf5c28f73},			/* 0.88233=f(0.49000)*/
-{11, 0,123,__LINE__, 0x3fec1528, 0x06962121, 0x3fe00000, 0x0000000b},			/* 0.87758=f(0.50000)*/
-{11, 0,123,__LINE__, 0x3febed85, 0xe8eda20c, 0x3fe051eb, 0x851eb85d},			/* 0.87274=f(0.51000)*/
-{11, 0,123,__LINE__, 0x3febc52c, 0xc3de6bbe, 0x3fe0a3d7, 0x0a3d70af},			/* 0.86781=f(0.52000)*/
-{11, 0,123,__LINE__, 0x3feb9c1d, 0x9a9ae192, 0x3fe0f5c2, 0x8f5c2901},			/* 0.86280=f(0.53000)*/
-{11, 0,123,__LINE__, 0x3feb7259, 0x729b252c, 0x3fe147ae, 0x147ae153},			/* 0.85770=f(0.54000)*/
-{11, 0,123,__LINE__, 0x3feb47e1, 0x83a84b14, 0x3fe19999, 0x999999a5},			/* 0.85252=f(0.55000)*/
-{11, 0,123,__LINE__, 0x3feb1cb6, 0xc26da5b0, 0x3fe1eb85, 0x1eb851f7},			/* 0.84725=f(0.56000)*/
-{11, 0,123,__LINE__, 0x3feaf0da, 0x5249d088, 0x3fe23d70, 0xa3d70a49},			/* 0.84190=f(0.57000)*/
-{11, 0,123,__LINE__, 0x3feac44d, 0x52335f02, 0x3fe28f5c, 0x28f5c29b},			/* 0.83646=f(0.58000)*/
-{11, 0,123,__LINE__, 0x3fea9710, 0xecd09a47, 0x3fe2e147, 0xae147aed},			/* 0.83094=f(0.59000)*/
-{11, 0,123,__LINE__, 0x3fea6926, 0x35185fe0, 0x3fe33333, 0x3333333f},			/* 0.82533=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3fea3a8e, 0x744d73ec, 0x3fe3851e, 0xb851eb91},			/* 0.81964=f(0.61000)*/
-{11, 0,123,__LINE__, 0x3fea0b4a, 0xd4b55b88, 0x3fe3d70a, 0x3d70a3e3},			/* 0.81387=f(0.62000)*/
-{11, 0,123,__LINE__, 0x3fe9db5c, 0x80783b01, 0x3fe428f5, 0xc28f5c35},			/* 0.80802=f(0.63000)*/
-{11, 0,123,__LINE__, 0x3fe9aac4, 0xbc3dfc32, 0x3fe47ae1, 0x47ae1487},			/* 0.80209=f(0.64000)*/
-{11, 0,123,__LINE__, 0x3fe97984, 0xc1262700, 0x3fe4cccc, 0xccccccd9},			/* 0.79608=f(0.65000)*/
-{11, 0,123,__LINE__, 0x3fe9479d, 0xbef879b6, 0x3fe51eb8, 0x51eb852b},			/* 0.78999=f(0.66000)*/
-{11, 0,123,__LINE__, 0x3fe91511, 0x263efc70, 0x3fe570a3, 0xd70a3d7d},			/* 0.78382=f(0.67000)*/
-{11, 0,123,__LINE__, 0x3fe8e1e0, 0x2df71e7a, 0x3fe5c28f, 0x5c28f5cf},			/* 0.77757=f(0.68000)*/
-{11, 0,123,__LINE__, 0x3fe8ae0c, 0x1de43e3a, 0x3fe6147a, 0xe147ae21},			/* 0.77124=f(0.69000)*/
-{11, 0,123,__LINE__, 0x3fe87996, 0x5a02a255, 0x3fe66666, 0x66666673},			/* 0.76484=f(0.70000)*/
-{11, 0,123,__LINE__, 0x3fe84480, 0x26985537, 0x3fe6b851, 0xeb851ec5},			/* 0.75836=f(0.71000)*/
-{11, 0,123,__LINE__, 0x3fe80eca, 0xd8cd0730, 0x3fe70a3d, 0x70a3d717},			/* 0.75180=f(0.72000)*/
-{11, 0,123,__LINE__, 0x3fe7d877, 0xf4922fc2, 0x3fe75c28, 0xf5c28f69},			/* 0.74517=f(0.73000)*/
-{11, 0,123,__LINE__, 0x3fe7a188, 0xcebd2ad0, 0x3fe7ae14, 0x7ae147bb},			/* 0.73846=f(0.74000)*/
-{11, 0,123,__LINE__, 0x3fe769fe, 0xc759d4a6, 0x3fe80000, 0x0000000d},			/* 0.73168=f(0.75000)*/
-{11, 0,123,__LINE__, 0x3fe731db, 0x4bdce1fd, 0x3fe851eb, 0x851eb85f},			/* 0.72483=f(0.76000)*/
-{11, 0,123,__LINE__, 0x3fe6f91f, 0xd0223e86, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.71791=f(0.77000)*/
-{11, 0,123,__LINE__, 0x3fe6bfcd, 0xcb101331, 0x3fe8f5c2, 0x8f5c2903},			/* 0.71091=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3fe685e6, 0x937f0fd2, 0x3fe947ae, 0x147ae155},			/* 0.70384=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3fe64b6b, 0xda1a09d4, 0x3fe99999, 0x999999a7},			/* 0.69670=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3fe6105f, 0x029c4897, 0x3fe9eb85, 0x1eb851f9},			/* 0.68949=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3fe5d4c1, 0x93909c56, 0x3fea3d70, 0xa3d70a4b},			/* 0.68222=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3fe59895, 0x1075f62e, 0x3fea8f5c, 0x28f5c29d},			/* 0.67487=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3fe55bdb, 0x08c37bdb, 0x3feae147, 0xae147aef},			/* 0.66746=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3fe51e94, 0xf15bcc5f, 0x3feb3333, 0x33333341},			/* 0.65998=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3fe4e0c4, 0x85c6d4e2, 0x3feb851e, 0xb851eb93},			/* 0.65243=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3fe4a26b, 0x46dce8de, 0x3febd70a, 0x3d70a3e5},			/* 0.64482=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3fe4638a, 0xccccaec9, 0x3fec28f5, 0xc28f5c37},			/* 0.63715=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3fe42424, 0xb55f3745, 0x3fec7ae1, 0x47ae1489},			/* 0.62941=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3fe3e43a, 0xa115e4b3, 0x3feccccc, 0xccccccdb},			/* 0.62160=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3fe3a3ce, 0x1571b662, 0x3fed1eb8, 0x51eb852d},			/* 0.61374=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3fe362e0, 0xee9020f0, 0x3fed70a3, 0xd70a3d7f},			/* 0.60582=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3fe32174, 0xb7b19b41, 0x3fedc28f, 0x5c28f5d1},			/* 0.59783=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3fe2df8b, 0x24080e04, 0x3fee147a, 0xe147ae23},			/* 0.58978=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3fe29d25, 0xdf140a48, 0x3fee6666, 0x66666675},			/* 0.58168=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3fe25a46, 0x9fc480b0, 0x3feeb851, 0xeb851ec7},			/* 0.57352=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3fe216ee, 0xfda37c59, 0x3fef0a3d, 0x70a3d719},			/* 0.56529=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3fe1d320, 0xeab1b237, 0x3fef5c28, 0xf5c28f6b},			/* 0.55702=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3fe18ede, 0x06194bac, 0x3fefae14, 0x7ae147bd},			/* 0.54868=f(0.99000)*/
-{11, 0,123,__LINE__, 0x3fe14a28, 0x109b247f, 0x3ff00000, 0x00000007},			/* 0.54030=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fe10500, 0xcb0bc271, 0x3ff028f5, 0xc28f5c30},			/* 0.53186=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3fe0bf69, 0xfc089254, 0x3ff051eb, 0x851eb859},			/* 0.52336=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fe07965, 0x6b578e35, 0x3ff07ae1, 0x47ae1482},			/* 0.51481=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fe032f4, 0xe5302499, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.50622=f(1.04000)*/
-{10, 0,123,__LINE__, 0x3fdfd834, 0x69a59055, 0x3ff0cccc, 0xccccccd4},			/* 0.49757=f(1.05000)*/
-{10, 0,123,__LINE__, 0x3fdf49ae, 0x55edce4d, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.48887=f(1.06000)*/
-{10, 0,123,__LINE__, 0x3fdeba5a, 0xc8481ce3, 0x3ff11eb8, 0x51eb8526},			/* 0.48012=f(1.07000)*/
-{10, 0,123,__LINE__, 0x3fde2a3e, 0x479b2dea, 0x3ff147ae, 0x147ae14f},			/* 0.47132=f(1.08000)*/
-{10, 0,123,__LINE__, 0x3fdd995c, 0x19b2b427, 0x3ff170a3, 0xd70a3d78},			/* 0.46248=f(1.09000)*/
-{10, 0,123,__LINE__, 0x3fdd07b7, 0xf0ca58aa, 0x3ff19999, 0x999999a1},			/* 0.45359=f(1.10000)*/
-{10, 0,123,__LINE__, 0x3fdc7555, 0x85478abd, 0x3ff1c28f, 0x5c28f5ca},			/* 0.44466=f(1.11000)*/
-{10, 0,123,__LINE__, 0x3fdbe238, 0x9aef2562, 0x3ff1eb85, 0x1eb851f3},			/* 0.43568=f(1.12000)*/
-{10, 0,123,__LINE__, 0x3fdb4e64, 0xf3c101c3, 0x3ff2147a, 0xe147ae1c},			/* 0.42665=f(1.13000)*/
-{10, 0,123,__LINE__, 0x3fdab9de, 0x5ae860cf, 0x3ff23d70, 0xa3d70a45},			/* 0.41759=f(1.14000)*/
-{10, 0,123,__LINE__, 0x3fda24a8, 0x99317fa1, 0x3ff26666, 0x6666666e},			/* 0.40848=f(1.15000)*/
-{10, 0,123,__LINE__, 0x3fd98ec7, 0x82e20910, 0x3ff28f5c, 0x28f5c297},			/* 0.39933=f(1.16000)*/
-{10, 0,123,__LINE__, 0x3fd8f83e, 0xeece9b82, 0x3ff2b851, 0xeb851ec0},			/* 0.39015=f(1.17000)*/
-{10, 0,123,__LINE__, 0x3fd86112, 0xb8048f74, 0x3ff2e147, 0xae147ae9},			/* 0.38092=f(1.18000)*/
-{10, 0,123,__LINE__, 0x3fd7c946, 0x44916898, 0x3ff30a3d, 0x70a3d712},			/* 0.37165=f(1.19000)*/
-{11, 0,123,__LINE__, 0x3fefffff, 0xff660711, 0xc01921fb, 0x54442d18},			/* 1.00000=f(-6.28318)*/
-{ 0, 0,123,__LINE__, 0xbfefffff, 0xf488d2e8, 0xc00921fb, 0x54442d18},			/* -1.00000=f(-3.14159)*/
-{ 0, 0,123,__LINE__, 0xbe6777a5, 0xbffffffe, 0xbff921fb, 0x54442d18},			/* -4.37114e-08=f(-1.57079)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x01bcb4a2, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0xbe6777a5, 0xcffffffe, 0x3ff921fb, 0x54442d18},			/* -4.37114e-08=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0xbfefffff, 0xfeba37c9, 0x400921fb, 0x54442d18},			/* -1.00000=f(3.14159)*/
-{ 2, 0,123,__LINE__, 0x00000000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 0.00000=f(4.71238)*/
-{10, 0,123,__LINE__, 0x3fc3be77, 0xd9039f8f, 0xc03e0000, 0x00000000},			/* 0.15425=f(-30.0000)*/
-{11, 0,123,__LINE__, 0xbfeffd4d, 0x66996f21, 0xc03c4ccc, 0xcccccccd},			/* -0.99967=f(-28.3000)*/
-{ 9, 0,123,__LINE__, 0x3fba755f, 0x155c7118, 0xc03a9999, 0x9999999a},			/* 0.10335=f(-26.6000)*/
-{ 0, 0,123,__LINE__, 0x3fef231f, 0x6f3f3ca0, 0xc038e666, 0x66666667},			/* 0.97303=f(-24.9000)*/
-{ 0, 0,123,__LINE__, 0xbfd6a97a, 0x962ef6e4, 0xc0373333, 0x33333334},			/* -0.35409=f(-23.2000)*/
-{ 0, 0,123,__LINE__, 0xbfec37a2, 0x1e9b4f00, 0xc0358000, 0x00000001},			/* -0.88179=f(-21.5000)*/
-{ 0, 0,123,__LINE__, 0x3fe29a33, 0x30ebb046, 0xc033cccc, 0xccccccce},			/* 0.58132=f(-19.8000)*/
-{11, 0,123,__LINE__, 0x3fe76c78, 0x93585ae8, 0xc0321999, 0x9999999b},			/* 0.73199=f(-18.1000)*/
-{11, 0,123,__LINE__, 0xbfe8a36a, 0x745f3a49, 0xc0306666, 0x66666668},			/* -0.76994=f(-16.4000)*/
-{ 0, 0,123,__LINE__, 0xbfe1131f, 0x28a6a080, 0xc02d6666, 0x6666666a},			/* -0.53358=f(-14.7000)*/
-{11, 0,123,__LINE__, 0x3fed09cd, 0xb9999ea0, 0xc02a0000, 0x00000004},			/* 0.90744=f(-13.0000)*/
-{10, 0,123,__LINE__, 0x3fd32f08, 0x6966ae1f, 0xc0269999, 0x9999999e},			/* 0.29974=f(-11.3000)*/
-{11, 0,123,__LINE__, 0xbfef828f, 0xec560908, 0xc0233333, 0x33333338},			/* -0.98468=f(-9.60000)*/
-{ 9, 0,123,__LINE__, 0xbfa78d8f, 0x1258fe1a, 0xc01f9999, 0x999999a3},			/* -0.04600=f(-7.90000)*/
-{ 0, 0,123,__LINE__, 0x3fefe3ac, 0x2775c725, 0xc018cccc, 0xccccccd6},			/* 0.99654=f(-6.20000)*/
-{ 0, 0,123,__LINE__, 0xbfcafb5a, 0xb5b1666e, 0xc0120000, 0x00000009},			/* -0.21079=f(-4.50000)*/
-{ 0, 0,123,__LINE__, 0xbfee26af, 0x70735450, 0xc0066666, 0x66666678},			/* -0.94222=f(-2.80000)*/
-{10, 0,123,__LINE__, 0x3fdd07b7, 0xf0ca58aa, 0xbff19999, 0x999999bd},			/* 0.45359=f(-1.10000)*/
-{11, 0,123,__LINE__, 0x3fea6926, 0x35185fe0, 0x3fe33333, 0x333332ec},			/* 0.82533=f(0.60000)*/
-{ 0, 0,123,__LINE__, 0xbfe55222, 0x04e9b384, 0x40026666, 0x66666654},			/* -0.66627=f(2.30000)*/
-{11, 0,123,__LINE__, 0xbfe4eaa6, 0x04ad05cd, 0x400fffff, 0xffffffee},			/* -0.65364=f(4.00000)*/
-{ 0, 0,123,__LINE__, 0x3feab5f7, 0x57340e80, 0x4016cccc, 0xccccccc4},			/* 0.83471=f(5.70000)*/
-{ 0, 0,123,__LINE__, 0x3fdc1128, 0x7ee705d3, 0x401d9999, 0x99999991},			/* 0.43854=f(7.40000)*/
-{11, 0,123,__LINE__, 0xbfee53bc, 0x2ba72cdc, 0x40223333, 0x3333332f},			/* -0.94772=f(9.10000)*/
-{10, 0,123,__LINE__, 0xbfc8dfcf, 0xdc490833, 0x40259999, 0x99999995},			/* -0.19433=f(10.8000)*/
-{11, 0,123,__LINE__, 0x3fefedf6, 0x9b59a000, 0x4028ffff, 0xfffffffb},			/* 0.99779=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0xbfb0130f, 0xfe49e1a7, 0x402c6666, 0x66666661},			/* -0.06279=f(14.2000)*/
-{ 0, 0,123,__LINE__, 0xbfef6969, 0x2efc6a80, 0x402fcccc, 0xccccccc7},			/* -0.98161=f(15.9000)*/
-{10, 0,123,__LINE__, 0x3fd43527, 0x45526310, 0x40319999, 0x99999997},			/* 0.31574=f(17.6000)*/
-{ 0, 0,123,__LINE__, 0x3feccee1, 0xc1484f2d, 0x40334ccc, 0xccccccca},			/* 0.90025=f(19.3000)*/
-{ 0, 0,123,__LINE__, 0xbfe186ff, 0xb77ac7fd, 0x4034ffff, 0xfffffffd},			/* -0.54772=f(21.0000)*/
-{11, 0,123,__LINE__, 0xbfe84a9f, 0xf8fc162d, 0x4036b333, 0x33333330},			/* -0.75910=f(22.7000)*/
-{11, 0,123,__LINE__, 0x3fe7c977, 0xd250fb00, 0x40386666, 0x66666663},			/* 0.74334=f(24.4000)*/
-{11, 0,123,__LINE__, 0x3fe22970, 0x1c349058, 0x403a1999, 0x99999996},			/* 0.56755=f(26.1000)*/
-{11, 0,123,__LINE__, 0xbfec7793, 0xaf30f05a, 0x403bcccc, 0xccccccc9},			/* -0.88959=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0xbfd5a705, 0xdb0448d3, 0x403d7fff, 0xfffffffc},			/* -0.33831=f(29.5000)*/
-0,};
-test_cosf(m)   {run_vector_1(m,cosf_vec,(char *)(cosf),"cosf","ff");   }	
diff --git a/newlib/libm/test/cosh_vec.c b/newlib/libm/test/cosh_vec.c
deleted file mode 100644
index c8d47e398..000000000
--- a/newlib/libm/test/cosh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type cosh_vec[] = {
-{63, 0,123,__LINE__, 0x3ffcf871, 0xf8dfa802, 0xbff33333, 0x33333333},			/* 1.81065=f(-1.20000)*/
-{58, 0,123,__LINE__, 0x3ffcbafc, 0xca475e1f, 0xbff30a3d, 0x70a3d70a},			/* 1.79565=f(-1.19000)*/
-{63, 0,123,__LINE__, 0x3ffc7e43, 0xe5bb3dd8, 0xbff2e147, 0xae147ae1},			/* 1.78082=f(-1.18000)*/
-{61, 0,123,__LINE__, 0x3ffc4245, 0xbd476b73, 0xbff2b851, 0xeb851eb8},			/* 1.76618=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3ffc0700, 0xc7bfd6ca, 0xbff28f5c, 0x28f5c28f},			/* 1.75171=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3ffbcc73, 0x80b62a84, 0xbff26666, 0x66666666},			/* 1.73741=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3ffb929c, 0x686fda70, 0xbff23d70, 0xa3d70a3d},			/* 1.72329=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3ffb597a, 0x03dc50b7, 0xbff2147a, 0xe147ae14},			/* 1.70934=f(-1.13000)*/
-{61, 0,123,__LINE__, 0x3ffb210a, 0xdc8b399b, 0xbff1eb85, 0x1eb851eb},			/* 1.69556=f(-1.12000)*/
-{63, 0,123,__LINE__, 0x3ffae94d, 0x80a2ed80, 0xbff1c28f, 0x5c28f5c2},			/* 1.68195=f(-1.11000)*/
-{59, 0,123,__LINE__, 0x3ffab240, 0x82d6f90f, 0xbff19999, 0x99999999},			/* 1.66851=f(-1.10000)*/
-{63, 0,123,__LINE__, 0x3ffa7be2, 0x7a5ec32e, 0xbff170a3, 0xd70a3d70},			/* 1.65524=f(-1.09000)*/
-{62, 0,123,__LINE__, 0x3ffa4632, 0x02ec508a, 0xbff147ae, 0x147ae147},			/* 1.64213=f(-1.08000)*/
-{62, 0,123,__LINE__, 0x3ffa112d, 0xbca32482, 0xbff11eb8, 0x51eb851e},			/* 1.62919=f(-1.07000)*/
-{63, 0,123,__LINE__, 0x3ff9dcd4, 0x4c0f3f1f, 0xbff0f5c2, 0x8f5c28f5},			/* 1.61641=f(-1.06000)*/
-{63, 0,123,__LINE__, 0x3ff9a924, 0x5a1c3817, 0xbff0cccc, 0xcccccccc},			/* 1.60379=f(-1.05000)*/
-{63, 0,123,__LINE__, 0x3ff9761c, 0x940c7647, 0xbff0a3d7, 0x0a3d70a3},			/* 1.59133=f(-1.04000)*/
-{62, 0,123,__LINE__, 0x3ff943bb, 0xab7083c1, 0xbff07ae1, 0x47ae147a},			/* 1.57903=f(-1.03000)*/
-{63, 0,123,__LINE__, 0x3ff91200, 0x561e7e0c, 0xbff051eb, 0x851eb851},			/* 1.56689=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3ff8e0e9, 0x4e29a24a, 0xbff028f5, 0xc28f5c28},			/* 1.55491=f(-1.01000)*/
-{59, 0,123,__LINE__, 0x3ff8b075, 0x51d9f54f, 0xbfefffff, 0xfffffffe},			/* 1.54308=f(-0.01000)*/
-{58, 0,123,__LINE__, 0x3ff880a3, 0x23a40720, 0xbfefae14, 0x7ae147ac},			/* 1.53140=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3ff85171, 0x8a20d1e6, 0xbfef5c28, 0xf5c28f5a},			/* 1.51988=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3ff822df, 0x5005b406, 0xbfef0a3d, 0x70a3d708},			/* 1.50851=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3ff7f4eb, 0x441c8516, 0xbfeeb851, 0xeb851eb6},			/* 1.49729=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x3ff7c794, 0x393bc5a6, 0xbfee6666, 0x66666664},			/* 1.48622=f(-0.95000)*/
-{63, 0,123,__LINE__, 0x3ff79ad9, 0x063ee989, 0xbfee147a, 0xe147ae12},			/* 1.47530=f(-0.94000)*/
-{61, 0,123,__LINE__, 0x3ff76eb8, 0x85febc75, 0xbfedc28f, 0x5c28f5c0},			/* 1.46453=f(-0.93000)*/
-{63, 0,123,__LINE__, 0x3ff74331, 0x9749e0c5, 0xbfed70a3, 0xd70a3d6e},			/* 1.45390=f(-0.92000)*/
-{61, 0,123,__LINE__, 0x3ff71843, 0x1cdd683c, 0xbfed1eb8, 0x51eb851c},			/* 1.44342=f(-0.91000)*/
-{62, 0,123,__LINE__, 0x3ff6edeb, 0xfd5d867d, 0xbfeccccc, 0xccccccca},			/* 1.43308=f(-0.90000)*/
-{61, 0,123,__LINE__, 0x3ff6c42b, 0x234e5d23, 0xbfec7ae1, 0x47ae1478},			/* 1.42289=f(-0.89000)*/
-{63, 0,123,__LINE__, 0x3ff69aff, 0x7d0ce134, 0xbfec28f5, 0xc28f5c26},			/* 1.41284=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3ff67267, 0xfcc7d9d2, 0xbfebd70a, 0x3d70a3d4},			/* 1.40293=f(-0.87000)*/
-{60, 0,123,__LINE__, 0x3ff64a63, 0x9878f7e8, 0xbfeb851e, 0xb851eb82},			/* 1.39316=f(-0.86000)*/
-{63, 0,123,__LINE__, 0x3ff622f1, 0x49de06d1, 0xbfeb3333, 0x33333330},			/* 1.38353=f(-0.85000)*/
-{63, 0,123,__LINE__, 0x3ff5fc10, 0x0e72357b, 0xbfeae147, 0xae147ade},			/* 1.37403=f(-0.84000)*/
-{57, 0,123,__LINE__, 0x3ff5d5be, 0xe7677840, 0xbfea8f5c, 0x28f5c28c},			/* 1.36468=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3ff5affc, 0xd9a002ef, 0xbfea3d70, 0xa3d70a3a},			/* 1.35546=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3ff58ac8, 0xeda7db19, 0xbfe9eb85, 0x1eb851e8},			/* 1.34638=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3ff56622, 0x2fae8258, 0xbfe99999, 0x99999996},			/* 1.33743=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3ff54207, 0xaf80b86e, 0xbfe947ae, 0x147ae144},			/* 1.32862=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3ff51e78, 0x80825514, 0xbfe8f5c2, 0x8f5c28f2},			/* 1.31993=f(-0.78000)*/
-{63, 0,123,__LINE__, 0x3ff4fb73, 0xb9a8394f, 0xbfe8a3d7, 0x0a3d70a0},			/* 1.31139=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3ff4d8f8, 0x7572582a, 0xbfe851eb, 0x851eb84e},			/* 1.30297=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x3ff4b705, 0xd1e5d6a5, 0xbfe7ffff, 0xfffffffc},			/* 1.29468=f(-0.75000)*/
-{63, 0,123,__LINE__, 0x3ff4959a, 0xf08742b7, 0xbfe7ae14, 0x7ae147aa},			/* 1.28652=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3ff474b6, 0xf654e136, 0xbfe75c28, 0xf5c28f58},			/* 1.27849=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3ff45459, 0x0bc11295, 0xbfe70a3d, 0x70a3d706},			/* 1.27059=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3ff43480, 0x5cacce30, 0xbfe6b851, 0xeb851eb4},			/* 1.26281=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3ff4152c, 0x1862342d, 0xbfe66666, 0x66666662},			/* 1.25516=f(-0.70000)*/
-{63, 0,123,__LINE__, 0x3ff3f65b, 0x718f359f, 0xbfe6147a, 0xe147ae10},			/* 1.24764=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3ff3d80d, 0x9e4052f4, 0xbfe5c28f, 0x5c28f5be},			/* 1.24024=f(-0.68000)*/
-{62, 0,123,__LINE__, 0x3ff3ba41, 0xd7db706d, 0xbfe570a3, 0xd70a3d6c},			/* 1.23297=f(-0.67000)*/
-{59, 0,123,__LINE__, 0x3ff39cf7, 0x5b1ac090, 0xbfe51eb8, 0x51eb851a},			/* 1.22582=f(-0.66000)*/
-{62, 0,123,__LINE__, 0x3ff3802d, 0x6807c462, 0xbfe4cccc, 0xccccccc8},			/* 1.21879=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x3ff363e3, 0x41f6615e, 0xbfe47ae1, 0x47ae1476},			/* 1.21188=f(-0.64000)*/
-{63, 0,123,__LINE__, 0x3ff34818, 0x2f800cf6, 0xbfe428f5, 0xc28f5c24},			/* 1.20510=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3ff32ccb, 0x7a7f0d82, 0xbfe3d70a, 0x3d70a3d2},			/* 1.19843=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3ff311fc, 0x7009d086, 0xbfe3851e, 0xb851eb80},			/* 1.19189=f(-0.61000)*/
-{63, 0,123,__LINE__, 0x3ff2f7aa, 0x606e562e, 0xbfe33333, 0x3333332e},			/* 1.18546=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3ff2ddd4, 0x9f2db1db, 0xbfe2e147, 0xae147adc},			/* 1.17915=f(-0.59000)*/
-{62, 0,123,__LINE__, 0x3ff2c47a, 0x82f79fa1, 0xbfe28f5c, 0x28f5c28a},			/* 1.17296=f(-0.58000)*/
-{61, 0,123,__LINE__, 0x3ff2ab9b, 0x65a62eb3, 0xbfe23d70, 0xa3d70a38},			/* 1.16689=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3ff29336, 0xa439807c, 0xbfe1eb85, 0x1eb851e6},			/* 1.16094=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3ff27b4b, 0x9ed39c60, 0xbfe19999, 0x99999994},			/* 1.15510=f(-0.55000)*/
-{60, 0,123,__LINE__, 0x3ff263d9, 0xb8b45807, 0xbfe147ae, 0x147ae142},			/* 1.14937=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3ff24ce0, 0x58355416, 0xbfe0f5c2, 0x8f5c28f0},			/* 1.14376=f(-0.53000)*/
-{62, 0,123,__LINE__, 0x3ff2365e, 0xe6c60d31, 0xbfe0a3d7, 0x0a3d709e},			/* 1.13827=f(-0.52000)*/
-{63, 0,123,__LINE__, 0x3ff22054, 0xd0e80140, 0xbfe051eb, 0x851eb84c},			/* 1.13289=f(-0.51000)*/
-{63, 0,123,__LINE__, 0x3ff20ac1, 0x862ae8ce, 0xbfdfffff, 0xfffffff4},			/* 1.12762=f(-0.50000)*/
-{63, 0,123,__LINE__, 0x3ff1f5a4, 0x7929046e, 0xbfdf5c28, 0xf5c28f50},			/* 1.12247=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x3ff1e0fd, 0x1f837e10, 0xbfdeb851, 0xeb851eac},			/* 1.11742=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3ff1ccca, 0xf1dede2c, 0xbfde147a, 0xe147ae08},			/* 1.11249=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3ff1b90d, 0x6bdf94ad, 0xbfdd70a3, 0xd70a3d64},			/* 1.10767=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x3ff1a5c4, 0x0c269582, 0xbfdccccc, 0xccccccc0},			/* 1.10297=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3ff192ee, 0x544e08c8, 0xbfdc28f5, 0xc28f5c1c},			/* 1.09837=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3ff1808b, 0xc8e60e64, 0xbfdb851e, 0xb851eb78},			/* 1.09388=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3ff16e9b, 0xf1719512, 0xbfdae147, 0xae147ad4},			/* 1.08950=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3ff15d1e, 0x586344c1, 0xbfda3d70, 0xa3d70a30},			/* 1.08523=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3ff14c12, 0x8b1a7c2a, 0xbfd99999, 0x9999998c},			/* 1.08107=f(-0.40000)*/
-{63, 0,123,__LINE__, 0x3ff13b78, 0x19e0619a, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.07701=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3ff12b4e, 0x97e506cd, 0xbfd851eb, 0x851eb844},			/* 1.07307=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3ff11b95, 0x9b3c9fcd, 0xbfd7ae14, 0x7ae147a0},			/* 1.06923=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3ff10c4c, 0xbcdcccca, 0xbfd70a3d, 0x70a3d6fc},			/* 1.06550=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3ff0fd73, 0x9899f6d1, 0xbfd66666, 0x66666658},			/* 1.06187=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3ff0ef09, 0xcd24bf4b, 0xbfd5c28f, 0x5c28f5b4},			/* 1.05835=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3ff0e10e, 0xfc078243, 0xbfd51eb8, 0x51eb8510},			/* 1.05494=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3ff0d382, 0xc9a3eb5c, 0xbfd47ae1, 0x47ae146c},			/* 1.05163=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3ff0c664, 0xdd309d5c, 0xbfd3d70a, 0x3d70a3c8},			/* 1.04843=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3ff0b9b4, 0xe0b6ec4a, 0xbfd33333, 0x33333324},			/* 1.04533=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3ff0ad72, 0x8110aa19, 0xbfd28f5c, 0x28f5c280},			/* 1.04234=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3ff0a19d, 0x6de605ab, 0xbfd1eb85, 0x1eb851dc},			/* 1.03945=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3ff09635, 0x59ab7c50, 0xbfd147ae, 0x147ae138},			/* 1.03667=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3ff08b39, 0xf99fdd92, 0xbfd0a3d7, 0x0a3d7094},			/* 1.03399=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3ff080ab, 0x05ca6145, 0xbfcfffff, 0xffffffe0},			/* 1.03141=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3ff07688, 0x38f8cfde, 0xbfceb851, 0xeb851e98},			/* 1.02893=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3ff06cd1, 0x50bdbcf5, 0xbfcd70a3, 0xd70a3d50},			/* 1.02656=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3ff06386, 0x0d6ed3ec, 0xbfcc28f5, 0xc28f5c08},			/* 1.02429=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3ff05aa6, 0x322336b4, 0xbfcae147, 0xae147ac0},			/* 1.02213=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3ff05231, 0x84b1ee9c, 0xbfc99999, 0x99999978},			/* 1.02006=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3ff04a27, 0xcdb06f29, 0xbfc851eb, 0x851eb830},			/* 1.01810=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3ff04288, 0xd8712ae7, 0xbfc70a3d, 0x70a3d6e8},			/* 1.01624=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3ff03b54, 0x73023a32, 0xbfc5c28f, 0x5c28f5a0},			/* 1.01448=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3ff0348a, 0x6e2c13de, 0xbfc47ae1, 0x47ae1458},			/* 1.01282=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3ff02e2a, 0x9d7057c8, 0xbfc33333, 0x33333310},			/* 1.01127=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3ff02834, 0xd708ab3d, 0xbfc1eb85, 0x1eb851c8},			/* 1.00981=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3ff022a8, 0xf3e5a732, 0xbfc0a3d7, 0x0a3d7080},			/* 1.00846=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3ff01d86, 0xcfadd84c, 0xbfbeb851, 0xeb851e71},			/* 1.00720=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3ff018ce, 0x48bcd09e, 0xbfbc28f5, 0xc28f5be2},			/* 1.00605=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3ff0147f, 0x40224b38, 0xbfb99999, 0x99999953},			/* 1.00500=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3ff01099, 0x99a16160, 0xbfb70a3d, 0x70a3d6c4},			/* 1.00405=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3ff00d1d, 0x3bafd17f, 0xbfb47ae1, 0x47ae1435},			/* 1.00320=f(-0.08000)*/
-{60, 0,123,__LINE__, 0x3ff00a0a, 0x0f7557c8, 0xbfb1eb85, 0x1eb851a6},			/* 1.00245=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3ff00760, 0x00cb1875, 0xbfaeb851, 0xeb851e2d},			/* 1.00180=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3ff0051e, 0xfe3b1bc2, 0xbfa99999, 0x9999990e},			/* 1.00125=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3ff00346, 0xf8ffdb76, 0xbfa47ae1, 0x47ae13ef},			/* 1.00080=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3ff001d7, 0xe503e214, 0xbf9eb851, 0xeb851da0},			/* 1.00045=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3ff000d1, 0xb8e17bb0, 0xbf947ae1, 0x47ae1362},			/* 1.00020=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3ff00034, 0x6de27852, 0xbf847ae1, 0x47ae1249},			/* 1.00005=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3ff00034, 0x6de27853, 0x3f847ae1, 0x47ae16ad},			/* 1.00005=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3ff000d1, 0xb8e17bb0, 0x3f947ae1, 0x47ae1594},			/* 1.00020=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3ff001d7, 0xe503e214, 0x3f9eb851, 0xeb851fd2},			/* 1.00045=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3ff00346, 0xf8ffdb76, 0x3fa47ae1, 0x47ae1508},			/* 1.00080=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3ff0051e, 0xfe3b1bc3, 0x3fa99999, 0x99999a27},			/* 1.00125=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3ff00760, 0x00cb1876, 0x3faeb851, 0xeb851f46},			/* 1.00180=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3ff00a0a, 0x0f7557c8, 0x3fb1eb85, 0x1eb85232},			/* 1.00245=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3ff00d1d, 0x3bafd180, 0x3fb47ae1, 0x47ae14c1},			/* 1.00320=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3ff01099, 0x99a16160, 0x3fb70a3d, 0x70a3d750},			/* 1.00405=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3ff0147f, 0x40224b39, 0x3fb99999, 0x999999df},			/* 1.00500=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3ff018ce, 0x48bcd09f, 0x3fbc28f5, 0xc28f5c6e},			/* 1.00605=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3ff01d86, 0xcfadd84c, 0x3fbeb851, 0xeb851efd},			/* 1.00720=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3ff022a8, 0xf3e5a734, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.00846=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3ff02834, 0xd708ab3e, 0x3fc1eb85, 0x1eb8520e},			/* 1.00981=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3ff02e2a, 0x9d7057ca, 0x3fc33333, 0x33333356},			/* 1.01127=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3ff0348a, 0x6e2c13e0, 0x3fc47ae1, 0x47ae149e},			/* 1.01282=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3ff03b54, 0x73023a34, 0x3fc5c28f, 0x5c28f5e6},			/* 1.01448=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3ff04288, 0xd8712ae9, 0x3fc70a3d, 0x70a3d72e},			/* 1.01624=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3ff04a27, 0xcdb06f2a, 0x3fc851eb, 0x851eb876},			/* 1.01810=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3ff05231, 0x84b1ee9e, 0x3fc99999, 0x999999be},			/* 1.02006=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3ff05aa6, 0x322336b6, 0x3fcae147, 0xae147b06},			/* 1.02213=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3ff06386, 0x0d6ed3ee, 0x3fcc28f5, 0xc28f5c4e},			/* 1.02429=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3ff06cd1, 0x50bdbcf7, 0x3fcd70a3, 0xd70a3d96},			/* 1.02656=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3ff07688, 0x38f8cfe0, 0x3fceb851, 0xeb851ede},			/* 1.02893=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3ff080ab, 0x05ca6147, 0x3fd00000, 0x00000013},			/* 1.03141=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3ff08b39, 0xf99fdd94, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.03399=f(0.26000)*/
-{63, 0,123,__LINE__, 0x3ff09635, 0x59ab7c53, 0x3fd147ae, 0x147ae15b},			/* 1.03667=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3ff0a19d, 0x6de605ad, 0x3fd1eb85, 0x1eb851ff},			/* 1.03945=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3ff0ad72, 0x8110aa1c, 0x3fd28f5c, 0x28f5c2a3},			/* 1.04234=f(0.29000)*/
-{62, 0,123,__LINE__, 0x3ff0b9b4, 0xe0b6ec4e, 0x3fd33333, 0x33333347},			/* 1.04533=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3ff0c664, 0xdd309d5e, 0x3fd3d70a, 0x3d70a3eb},			/* 1.04843=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3ff0d382, 0xc9a3eb60, 0x3fd47ae1, 0x47ae148f},			/* 1.05163=f(0.32000)*/
-{63, 0,123,__LINE__, 0x3ff0e10e, 0xfc078246, 0x3fd51eb8, 0x51eb8533},			/* 1.05494=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3ff0ef09, 0xcd24bf4e, 0x3fd5c28f, 0x5c28f5d7},			/* 1.05835=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3ff0fd73, 0x9899f6d4, 0x3fd66666, 0x6666667b},			/* 1.06187=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3ff10c4c, 0xbcdcccce, 0x3fd70a3d, 0x70a3d71f},			/* 1.06550=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3ff11b95, 0x9b3c9fd0, 0x3fd7ae14, 0x7ae147c3},			/* 1.06923=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3ff12b4e, 0x97e506d0, 0x3fd851eb, 0x851eb867},			/* 1.07307=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3ff13b78, 0x19e0619e, 0x3fd8f5c2, 0x8f5c290b},			/* 1.07701=f(0.39000)*/
-{62, 0,123,__LINE__, 0x3ff14c12, 0x8b1a7c2d, 0x3fd99999, 0x999999af},			/* 1.08107=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3ff15d1e, 0x586344c4, 0x3fda3d70, 0xa3d70a53},			/* 1.08523=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3ff16e9b, 0xf1719516, 0x3fdae147, 0xae147af7},			/* 1.08950=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3ff1808b, 0xc8e60e68, 0x3fdb851e, 0xb851eb9b},			/* 1.09388=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3ff192ee, 0x544e08cc, 0x3fdc28f5, 0xc28f5c3f},			/* 1.09837=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3ff1a5c4, 0x0c269587, 0x3fdccccc, 0xcccccce3},			/* 1.10297=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3ff1b90d, 0x6bdf94b1, 0x3fdd70a3, 0xd70a3d87},			/* 1.10767=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3ff1ccca, 0xf1dede30, 0x3fde147a, 0xe147ae2b},			/* 1.11249=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3ff1e0fd, 0x1f837e14, 0x3fdeb851, 0xeb851ecf},			/* 1.11742=f(0.48000)*/
-{63, 0,123,__LINE__, 0x3ff1f5a4, 0x79290472, 0x3fdf5c28, 0xf5c28f73},			/* 1.12247=f(0.49000)*/
-{61, 0,123,__LINE__, 0x3ff20ac1, 0x862ae8d3, 0x3fe00000, 0x0000000b},			/* 1.12762=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3ff22054, 0xd0e80146, 0x3fe051eb, 0x851eb85d},			/* 1.13289=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3ff2365e, 0xe6c60d36, 0x3fe0a3d7, 0x0a3d70af},			/* 1.13827=f(0.52000)*/
-{63, 0,123,__LINE__, 0x3ff24ce0, 0x5835541a, 0x3fe0f5c2, 0x8f5c2901},			/* 1.14376=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3ff263d9, 0xb8b4580c, 0x3fe147ae, 0x147ae153},			/* 1.14937=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3ff27b4b, 0x9ed39c65, 0x3fe19999, 0x999999a5},			/* 1.15510=f(0.55000)*/
-{62, 0,123,__LINE__, 0x3ff29336, 0xa4398081, 0x3fe1eb85, 0x1eb851f7},			/* 1.16094=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3ff2ab9b, 0x65a62eb8, 0x3fe23d70, 0xa3d70a49},			/* 1.16689=f(0.57000)*/
-{63, 0,123,__LINE__, 0x3ff2c47a, 0x82f79fa6, 0x3fe28f5c, 0x28f5c29b},			/* 1.17296=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3ff2ddd4, 0x9f2db1e0, 0x3fe2e147, 0xae147aed},			/* 1.17915=f(0.59000)*/
-{63, 0,123,__LINE__, 0x3ff2f7aa, 0x606e5634, 0x3fe33333, 0x3333333f},			/* 1.18546=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3ff311fc, 0x7009d08c, 0x3fe3851e, 0xb851eb91},			/* 1.19189=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3ff32ccb, 0x7a7f0d88, 0x3fe3d70a, 0x3d70a3e3},			/* 1.19843=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3ff34818, 0x2f800cfc, 0x3fe428f5, 0xc28f5c35},			/* 1.20510=f(0.63000)*/
-{63, 0,123,__LINE__, 0x3ff363e3, 0x41f66164, 0x3fe47ae1, 0x47ae1487},			/* 1.21188=f(0.64000)*/
-{63, 0,123,__LINE__, 0x3ff3802d, 0x6807c468, 0x3fe4cccc, 0xccccccd9},			/* 1.21879=f(0.65000)*/
-{62, 0,123,__LINE__, 0x3ff39cf7, 0x5b1ac095, 0x3fe51eb8, 0x51eb852b},			/* 1.22582=f(0.66000)*/
-{61, 0,123,__LINE__, 0x3ff3ba41, 0xd7db7073, 0x3fe570a3, 0xd70a3d7d},			/* 1.23297=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3ff3d80d, 0x9e4052fa, 0x3fe5c28f, 0x5c28f5cf},			/* 1.24024=f(0.68000)*/
-{62, 0,123,__LINE__, 0x3ff3f65b, 0x718f35a5, 0x3fe6147a, 0xe147ae21},			/* 1.24764=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3ff4152c, 0x18623434, 0x3fe66666, 0x66666673},			/* 1.25516=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3ff43480, 0x5cacce37, 0x3fe6b851, 0xeb851ec5},			/* 1.26281=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3ff45459, 0x0bc1129c, 0x3fe70a3d, 0x70a3d717},			/* 1.27059=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3ff474b6, 0xf654e13d, 0x3fe75c28, 0xf5c28f69},			/* 1.27849=f(0.73000)*/
-{62, 0,123,__LINE__, 0x3ff4959a, 0xf08742be, 0x3fe7ae14, 0x7ae147bb},			/* 1.28652=f(0.74000)*/
-{63, 0,123,__LINE__, 0x3ff4b705, 0xd1e5d6ad, 0x3fe80000, 0x0000000d},			/* 1.29468=f(0.75000)*/
-{63, 0,123,__LINE__, 0x3ff4d8f8, 0x75725831, 0x3fe851eb, 0x851eb85f},			/* 1.30297=f(0.76000)*/
-{63, 0,123,__LINE__, 0x3ff4fb73, 0xb9a83955, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.31139=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3ff51e78, 0x8082551c, 0x3fe8f5c2, 0x8f5c2903},			/* 1.31993=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3ff54207, 0xaf80b877, 0x3fe947ae, 0x147ae155},			/* 1.32862=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3ff56622, 0x2fae825f, 0x3fe99999, 0x999999a7},			/* 1.33743=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3ff58ac8, 0xeda7db20, 0x3fe9eb85, 0x1eb851f9},			/* 1.34638=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3ff5affc, 0xd9a002f6, 0x3fea3d70, 0xa3d70a4b},			/* 1.35546=f(0.82000)*/
-{60, 0,123,__LINE__, 0x3ff5d5be, 0xe7677848, 0x3fea8f5c, 0x28f5c29d},			/* 1.36468=f(0.83000)*/
-{61, 0,123,__LINE__, 0x3ff5fc10, 0x0e723584, 0x3feae147, 0xae147aef},			/* 1.37403=f(0.84000)*/
-{63, 0,123,__LINE__, 0x3ff622f1, 0x49de06d9, 0x3feb3333, 0x33333341},			/* 1.38353=f(0.85000)*/
-{62, 0,123,__LINE__, 0x3ff64a63, 0x9878f7f2, 0x3feb851e, 0xb851eb93},			/* 1.39316=f(0.86000)*/
-{63, 0,123,__LINE__, 0x3ff67267, 0xfcc7d9d8, 0x3febd70a, 0x3d70a3e5},			/* 1.40293=f(0.87000)*/
-{63, 0,123,__LINE__, 0x3ff69aff, 0x7d0ce13c, 0x3fec28f5, 0xc28f5c37},			/* 1.41284=f(0.88000)*/
-{63, 0,123,__LINE__, 0x3ff6c42b, 0x234e5d2c, 0x3fec7ae1, 0x47ae1489},			/* 1.42289=f(0.89000)*/
-{60, 0,123,__LINE__, 0x3ff6edeb, 0xfd5d8687, 0x3feccccc, 0xccccccdb},			/* 1.43308=f(0.90000)*/
-{61, 0,123,__LINE__, 0x3ff71843, 0x1cdd6844, 0x3fed1eb8, 0x51eb852d},			/* 1.44342=f(0.91000)*/
-{62, 0,123,__LINE__, 0x3ff74331, 0x9749e0ce, 0x3fed70a3, 0xd70a3d7f},			/* 1.45390=f(0.92000)*/
-{63, 0,123,__LINE__, 0x3ff76eb8, 0x85febc7f, 0x3fedc28f, 0x5c28f5d1},			/* 1.46453=f(0.93000)*/
-{61, 0,123,__LINE__, 0x3ff79ad9, 0x063ee994, 0x3fee147a, 0xe147ae23},			/* 1.47530=f(0.94000)*/
-{63, 0,123,__LINE__, 0x3ff7c794, 0x393bc5af, 0x3fee6666, 0x66666675},			/* 1.48622=f(0.95000)*/
-{58, 0,123,__LINE__, 0x3ff7f4eb, 0x441c8520, 0x3feeb851, 0xeb851ec7},			/* 1.49729=f(0.96000)*/
-{63, 0,123,__LINE__, 0x3ff822df, 0x5005b40f, 0x3fef0a3d, 0x70a3d719},			/* 1.50851=f(0.97000)*/
-{62, 0,123,__LINE__, 0x3ff85171, 0x8a20d1f2, 0x3fef5c28, 0xf5c28f6b},			/* 1.51988=f(0.98000)*/
-{62, 0,123,__LINE__, 0x3ff880a3, 0x23a4072a, 0x3fefae14, 0x7ae147bd},			/* 1.53140=f(0.99000)*/
-{63, 0,123,__LINE__, 0x3ff8b075, 0x51d9f558, 0x3ff00000, 0x00000007},			/* 1.54308=f(1.00000)*/
-{61, 0,123,__LINE__, 0x3ff8e0e9, 0x4e29a253, 0x3ff028f5, 0xc28f5c30},			/* 1.55491=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3ff91200, 0x561e7e16, 0x3ff051eb, 0x851eb859},			/* 1.56689=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ff943bb, 0xab7083ca, 0x3ff07ae1, 0x47ae1482},			/* 1.57903=f(1.03000)*/
-{59, 0,123,__LINE__, 0x3ff9761c, 0x940c7650, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.59133=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ff9a924, 0x5a1c3820, 0x3ff0cccc, 0xccccccd4},			/* 1.60379=f(1.05000)*/
-{62, 0,123,__LINE__, 0x3ff9dcd4, 0x4c0f3f2a, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.61641=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3ffa112d, 0xbca3248b, 0x3ff11eb8, 0x51eb8526},			/* 1.62919=f(1.07000)*/
-{63, 0,123,__LINE__, 0x3ffa4632, 0x02ec5097, 0x3ff147ae, 0x147ae14f},			/* 1.64213=f(1.08000)*/
-{62, 0,123,__LINE__, 0x3ffa7be2, 0x7a5ec339, 0x3ff170a3, 0xd70a3d78},			/* 1.65524=f(1.09000)*/
-{63, 0,123,__LINE__, 0x3ffab240, 0x82d6f91c, 0x3ff19999, 0x999999a1},			/* 1.66851=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3ffae94d, 0x80a2ed8b, 0x3ff1c28f, 0x5c28f5ca},			/* 1.68195=f(1.11000)*/
-{60, 0,123,__LINE__, 0x3ffb210a, 0xdc8b39a7, 0x3ff1eb85, 0x1eb851f3},			/* 1.69556=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ffb597a, 0x03dc50c2, 0x3ff2147a, 0xe147ae1c},			/* 1.70934=f(1.13000)*/
-{63, 0,123,__LINE__, 0x3ffb929c, 0x686fda7b, 0x3ff23d70, 0xa3d70a45},			/* 1.72329=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ffbcc73, 0x80b62a8f, 0x3ff26666, 0x6666666e},			/* 1.73741=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ffc0700, 0xc7bfd6d5, 0x3ff28f5c, 0x28f5c297},			/* 1.75171=f(1.16000)*/
-{62, 0,123,__LINE__, 0x3ffc4245, 0xbd476b80, 0x3ff2b851, 0xeb851ec0},			/* 1.76618=f(1.17000)*/
-{63, 0,123,__LINE__, 0x3ffc7e43, 0xe5bb3de2, 0x3ff2e147, 0xae147ae9},			/* 1.78082=f(1.18000)*/
-{61, 0,123,__LINE__, 0x3ffcbafc, 0xca475e2b, 0x3ff30a3d, 0x70a3d712},			/* 1.79565=f(1.19000)*/
-{60, 0,123,__LINE__, 0x4070bbf2, 0xbc2b69c8, 0xc01921fb, 0x54442d18},			/* 267.746=f(-6.28318)*/
-{62, 0,123,__LINE__, 0x404bd4e9, 0xaa3e9cdd, 0xc012d97c, 0x7f3321d2},			/* 55.6633=f(-4.71238)*/
-{63, 0,123,__LINE__, 0x40272f14, 0x7fee3fff, 0xc00921fb, 0x54442d18},			/* 11.5919=f(-3.14159)*/
-{58, 0,123,__LINE__, 0x400412cc, 0x2a8d4e9f, 0xbff921fb, 0x54442d18},			/* 2.50917=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{58, 0,123,__LINE__, 0x400412cc, 0x2a8d4e9f, 0x3ff921fb, 0x54442d18},			/* 2.50917=f(1.57079)*/
-{63, 0,123,__LINE__, 0x40272f14, 0x7fee3fff, 0x400921fb, 0x54442d18},			/* 11.5919=f(3.14159)*/
-{62, 0,123,__LINE__, 0x404bd4e9, 0xaa3e9cdd, 0x4012d97c, 0x7f3321d2},			/* 55.6633=f(4.71238)*/
-{63, 0,123,__LINE__, 0x42937047, 0x0aec28e4, 0xc03e0000, 0x00000000},			/* 5.34324e+12=f(-30.0000)*/
-{63, 0,123,__LINE__, 0x426c68ab, 0xda31cdb8, 0xc03c4ccc, 0xcccccccd},			/* 9.76121e+11=f(-28.3000)*/
-{60, 0,123,__LINE__, 0x4244c263, 0x8e2b5848, 0xc03a9999, 0x9999999a},			/* 1.78321e+11=f(-26.6000)*/
-{63, 0,123,__LINE__, 0x421e56cf, 0x7144c252, 0xc038e666, 0x66666667},			/* 3.25764e+10=f(-24.9000)*/
-{60, 0,123,__LINE__, 0x41f62b79, 0x1e77d137, 0xc0373333, 0x33333334},			/* 5.95116e+09=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x41d03343, 0x003272a8, 0xc0358000, 0x00000001},			/* 1.08718e+09=f(-21.5000)*/
-{62, 0,123,__LINE__, 0x41a7ad17, 0x51ce1a0d, 0xc033cccc, 0xccccccce},			/* 1.98610e+08=f(-19.8000)*/
-{61, 0,123,__LINE__, 0x41814d0b, 0xc17d4224, 0xc0321999, 0x9999999b},			/* 3.62827e+07=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x415948e8, 0xe47eadbc, 0xc0306666, 0x66666668},			/* 6.62826e+06=f(-16.4000)*/
-{63, 0,123,__LINE__, 0x413279f9, 0xd10e6ddb, 0xc02d6666, 0x6666666a},			/* 1.21087e+06=f(-14.7000)*/
-{63, 0,123,__LINE__, 0x410b00b5, 0x916b6132, 0xc02a0000, 0x00000004},			/* 221206=f(-13.0000)*/
-{63, 0,123,__LINE__, 0x40e3bb5a, 0x336a724a, 0xc0269999, 0x9999999e},			/* 40410=f(-11.3000)*/
-{63, 0,123,__LINE__, 0x40bcd664, 0x0c8f67aa, 0xc0233333, 0x33333338},			/* 7382.39=f(-9.60000)*/
-{62, 0,123,__LINE__, 0x40951290, 0xbdecc6ea, 0xc01f9999, 0x999999a3},			/* 1348.64=f(-7.90000)*/
-{62, 0,123,__LINE__, 0x406ecc04, 0x62869201, 0xc018cccc, 0xccccccd6},			/* 246.375=f(-6.20000)*/
-{62, 0,123,__LINE__, 0x404681ce, 0xb0641389, 0xc0120000, 0x00000009},			/* 45.0141=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x40208165, 0x9e7a609e, 0xc0066666, 0x66666678},			/* 8.25272=f(-2.80000)*/
-{62, 0,123,__LINE__, 0x3ffab240, 0x82d6f941, 0xbff19999, 0x999999bd},			/* 1.66851=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3ff2f7aa, 0x606e561a, 0x3fe33333, 0x333332ec},			/* 1.18546=f(0.60000)*/
-{62, 0,123,__LINE__, 0x4014261d, 0x2b7d6152, 0x40026666, 0x66666654},			/* 5.03722=f(2.30000)*/
-{61, 0,123,__LINE__, 0x403b4ee8, 0x58de3e43, 0x400fffff, 0xffffffee},			/* 27.3082=f(4.00000)*/
-{63, 0,123,__LINE__, 0x4062adee, 0x9455e3ef, 0x4016cccc, 0xccccccc4},			/* 149.435=f(5.70000)*/
-{64, 0,123,__LINE__, 0x40898ff0, 0xaea73114, 0x401d9999, 0x99999991},			/* 817.992=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40b17da5, 0x7af77ec3, 0x40223333, 0x3333332f},			/* 4477.64=f(9.10000)*/
-{63, 0,123,__LINE__, 0x40d7ef99, 0xa3138b94, 0x40259999, 0x99999995},			/* 24510=f(10.8000)*/
-{64, 0,123,__LINE__, 0x410060c5, 0x2566b454, 0x4028ffff, 0xfffffffb},			/* 134168=f(12.5000)*/
-{62, 0,123,__LINE__, 0x412669c0, 0x308d36dd, 0x402c6666, 0x66666661},			/* 734432=f(14.2000)*/
-{62, 0,123,__LINE__, 0x414eac09, 0x532f3e8a, 0x402fcccc, 0xccccccc7},			/* 4.02024e+06=f(15.9000)*/
-{62, 0,123,__LINE__, 0x4174fcb4, 0x4c4756da, 0x40319999, 0x99999997},			/* 2.20066e+07=f(17.6000)*/
-{63, 0,123,__LINE__, 0x419cb879, 0xa3e73668, 0x40334ccc, 0xccccccca},			/* 1.20463e+08=f(19.3000)*/
-{57, 0,123,__LINE__, 0x41c3a6e1, 0xfd9eecbf, 0x4034ffff, 0xfffffffd},			/* 6.59408e+08=f(21.0000)*/
-{60, 0,123,__LINE__, 0x41eae4b2, 0x68df16f6, 0x4036b333, 0x33333330},			/* 3.60956e+09=f(22.7000)*/
-{63, 0,123,__LINE__, 0x421266ce, 0xffa84595, 0x40386666, 0x66666663},			/* 1.97586e+10=f(24.4000)*/
-{64, 0,123,__LINE__, 0x42392ead, 0xfa09870a, 0x403a1999, 0x99999996},			/* 1.08157e+11=f(26.1000)*/
-{63, 0,123,__LINE__, 0x42613b19, 0x1e69fb25, 0x403bcccc, 0xccccccc9},			/* 5.92048e+11=f(27.8000)*/
-{61, 0,123,__LINE__, 0x42879487, 0x9e85b8dc, 0x403d7fff, 0xfffffffc},			/* 3.24084e+12=f(29.5000)*/
-0,};
-test_cosh(m)   {run_vector_1(m,cosh_vec,(char *)(cosh),"cosh","dd");   }	
diff --git a/newlib/libm/test/coshf_vec.c b/newlib/libm/test/coshf_vec.c
deleted file mode 100644
index d8f96bb53..000000000
--- a/newlib/libm/test/coshf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type coshf_vec[] = {
-{14, 0,123,__LINE__, 0x3ffcf872, 0x20000000, 0xbff33333, 0x33333333},			/* 1.81065=f(-1.20000)*/
-{14, 0,123,__LINE__, 0x3ffcbafc, 0xe0000000, 0xbff30a3d, 0x70a3d70a},			/* 1.79565=f(-1.19000)*/
-{14, 0,123,__LINE__, 0x3ffc7e43, 0xe0000000, 0xbff2e147, 0xae147ae1},			/* 1.78082=f(-1.18000)*/
-{14, 0,123,__LINE__, 0x3ffc4245, 0xa0000000, 0xbff2b851, 0xeb851eb8},			/* 1.76618=f(-1.17000)*/
-{14, 0,123,__LINE__, 0x3ffc0700, 0xa0000000, 0xbff28f5c, 0x28f5c28f},			/* 1.75171=f(-1.16000)*/
-{13, 0,123,__LINE__, 0x3ffbcc73, 0x80000000, 0xbff26666, 0x66666666},			/* 1.73741=f(-1.15000)*/
-{13, 0,123,__LINE__, 0x3ffb929c, 0x60000000, 0xbff23d70, 0xa3d70a3d},			/* 1.72329=f(-1.14000)*/
-{13, 0,123,__LINE__, 0x3ffb597a, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 1.70934=f(-1.13000)*/
-{13, 0,123,__LINE__, 0x3ffb210b, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 1.69556=f(-1.12000)*/
-{13, 0,123,__LINE__, 0x3ffae94d, 0x80000000, 0xbff1c28f, 0x5c28f5c2},			/* 1.68195=f(-1.11000)*/
-{13, 0,123,__LINE__, 0x3ffab240, 0xa0000000, 0xbff19999, 0x99999999},			/* 1.66851=f(-1.10000)*/
-{13, 0,123,__LINE__, 0x3ffa7be2, 0xa0000000, 0xbff170a3, 0xd70a3d70},			/* 1.65524=f(-1.09000)*/
-{13, 0,123,__LINE__, 0x3ffa4632, 0x20000000, 0xbff147ae, 0x147ae147},			/* 1.64213=f(-1.08000)*/
-{13, 0,123,__LINE__, 0x3ffa112d, 0xc0000000, 0xbff11eb8, 0x51eb851e},			/* 1.62919=f(-1.07000)*/
-{13, 0,123,__LINE__, 0x3ff9dcd4, 0x40000000, 0xbff0f5c2, 0x8f5c28f5},			/* 1.61641=f(-1.06000)*/
-{13, 0,123,__LINE__, 0x3ff9a924, 0x40000000, 0xbff0cccc, 0xcccccccc},			/* 1.60379=f(-1.05000)*/
-{13, 0,123,__LINE__, 0x3ff9761c, 0xa0000000, 0xbff0a3d7, 0x0a3d70a3},			/* 1.59133=f(-1.04000)*/
-{13, 0,123,__LINE__, 0x3ff943bb, 0xa0000000, 0xbff07ae1, 0x47ae147a},			/* 1.57903=f(-1.03000)*/
-{13, 0,123,__LINE__, 0x3ff91200, 0x60000000, 0xbff051eb, 0x851eb851},			/* 1.56689=f(-1.02000)*/
-{13, 0,123,__LINE__, 0x3ff8e0e9, 0x40000000, 0xbff028f5, 0xc28f5c28},			/* 1.55491=f(-1.01000)*/
-{13, 0,123,__LINE__, 0x3ff8b075, 0x40000000, 0xbfefffff, 0xfffffffe},			/* 1.54308=f(-0.01000)*/
-{13, 0,123,__LINE__, 0x3ff880a3, 0x40000000, 0xbfefae14, 0x7ae147ac},			/* 1.53140=f(-0.99000)*/
-{13, 0,123,__LINE__, 0x3ff85171, 0xa0000000, 0xbfef5c28, 0xf5c28f5a},			/* 1.51988=f(-0.98000)*/
-{13, 0,123,__LINE__, 0x3ff822df, 0x60000000, 0xbfef0a3d, 0x70a3d708},			/* 1.50851=f(-0.97000)*/
-{12, 0,123,__LINE__, 0x3ff7f4eb, 0x40000000, 0xbfeeb851, 0xeb851eb6},			/* 1.49729=f(-0.96000)*/
-{12, 0,123,__LINE__, 0x3ff7c794, 0x20000000, 0xbfee6666, 0x66666664},			/* 1.48622=f(-0.95000)*/
-{12, 0,123,__LINE__, 0x3ff79ad9, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 1.47530=f(-0.94000)*/
-{12, 0,123,__LINE__, 0x3ff76eb8, 0x80000000, 0xbfedc28f, 0x5c28f5c0},			/* 1.46453=f(-0.93000)*/
-{12, 0,123,__LINE__, 0x3ff74331, 0x80000000, 0xbfed70a3, 0xd70a3d6e},			/* 1.45390=f(-0.92000)*/
-{12, 0,123,__LINE__, 0x3ff71843, 0x20000000, 0xbfed1eb8, 0x51eb851c},			/* 1.44342=f(-0.91000)*/
-{12, 0,123,__LINE__, 0x3ff6edec, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 1.43308=f(-0.90000)*/
-{12, 0,123,__LINE__, 0x3ff6c42b, 0x20000000, 0xbfec7ae1, 0x47ae1478},			/* 1.42289=f(-0.89000)*/
-{12, 0,123,__LINE__, 0x3ff69aff, 0x80000000, 0xbfec28f5, 0xc28f5c26},			/* 1.41284=f(-0.88000)*/
-{12, 0,123,__LINE__, 0x3ff67268, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 1.40293=f(-0.87000)*/
-{12, 0,123,__LINE__, 0x3ff64a63, 0x80000000, 0xbfeb851e, 0xb851eb82},			/* 1.39316=f(-0.86000)*/
-{12, 0,123,__LINE__, 0x3ff622f1, 0x40000000, 0xbfeb3333, 0x33333330},			/* 1.38353=f(-0.85000)*/
-{12, 0,123,__LINE__, 0x3ff5fc0f, 0xe0000000, 0xbfeae147, 0xae147ade},			/* 1.37403=f(-0.84000)*/
-{12, 0,123,__LINE__, 0x3ff5d5be, 0xc0000000, 0xbfea8f5c, 0x28f5c28c},			/* 1.36468=f(-0.83000)*/
-{12, 0,123,__LINE__, 0x3ff5affc, 0xe0000000, 0xbfea3d70, 0xa3d70a3a},			/* 1.35546=f(-0.82000)*/
-{12, 0,123,__LINE__, 0x3ff58ac9, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 1.34638=f(-0.81000)*/
-{12, 0,123,__LINE__, 0x3ff56622, 0x40000000, 0xbfe99999, 0x99999996},			/* 1.33743=f(-0.80000)*/
-{12, 0,123,__LINE__, 0x3ff54207, 0xc0000000, 0xbfe947ae, 0x147ae144},			/* 1.32862=f(-0.79000)*/
-{12, 0,123,__LINE__, 0x3ff51e78, 0x80000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 1.31993=f(-0.78000)*/
-{12, 0,123,__LINE__, 0x3ff4fb73, 0xa0000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 1.31139=f(-0.77000)*/
-{12, 0,123,__LINE__, 0x3ff4d8f8, 0x60000000, 0xbfe851eb, 0x851eb84e},			/* 1.30297=f(-0.76000)*/
-{12, 0,123,__LINE__, 0x3ff4b705, 0xc0000000, 0xbfe7ffff, 0xfffffffc},			/* 1.29468=f(-0.75000)*/
-{12, 0,123,__LINE__, 0x3ff4959a, 0xe0000000, 0xbfe7ae14, 0x7ae147aa},			/* 1.28652=f(-0.74000)*/
-{12, 0,123,__LINE__, 0x3ff474b7, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 1.27849=f(-0.73000)*/
-{12, 0,123,__LINE__, 0x3ff45459, 0x20000000, 0xbfe70a3d, 0x70a3d706},			/* 1.27059=f(-0.72000)*/
-{12, 0,123,__LINE__, 0x3ff43480, 0x40000000, 0xbfe6b851, 0xeb851eb4},			/* 1.26281=f(-0.71000)*/
-{12, 0,123,__LINE__, 0x3ff4152c, 0x20000000, 0xbfe66666, 0x66666662},			/* 1.25516=f(-0.70000)*/
-{12, 0,123,__LINE__, 0x3ff3f65b, 0x80000000, 0xbfe6147a, 0xe147ae10},			/* 1.24764=f(-0.69000)*/
-{12, 0,123,__LINE__, 0x3ff3d80d, 0xa0000000, 0xbfe5c28f, 0x5c28f5be},			/* 1.24024=f(-0.68000)*/
-{12, 0,123,__LINE__, 0x3ff3ba41, 0xe0000000, 0xbfe570a3, 0xd70a3d6c},			/* 1.23297=f(-0.67000)*/
-{12, 0,123,__LINE__, 0x3ff39cf7, 0x60000000, 0xbfe51eb8, 0x51eb851a},			/* 1.22582=f(-0.66000)*/
-{12, 0,123,__LINE__, 0x3ff3802d, 0x60000000, 0xbfe4cccc, 0xccccccc8},			/* 1.21879=f(-0.65000)*/
-{12, 0,123,__LINE__, 0x3ff363e3, 0x40000000, 0xbfe47ae1, 0x47ae1476},			/* 1.21188=f(-0.64000)*/
-{12, 0,123,__LINE__, 0x3ff34818, 0x20000000, 0xbfe428f5, 0xc28f5c24},			/* 1.20510=f(-0.63000)*/
-{12, 0,123,__LINE__, 0x3ff32ccb, 0x80000000, 0xbfe3d70a, 0x3d70a3d2},			/* 1.19843=f(-0.62000)*/
-{12, 0,123,__LINE__, 0x3ff311fc, 0x80000000, 0xbfe3851e, 0xb851eb80},			/* 1.19189=f(-0.61000)*/
-{12, 0,123,__LINE__, 0x3ff2f7aa, 0x60000000, 0xbfe33333, 0x3333332e},			/* 1.18546=f(-0.60000)*/
-{12, 0,123,__LINE__, 0x3ff2ddd4, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* 1.17915=f(-0.59000)*/
-{12, 0,123,__LINE__, 0x3ff2c47a, 0x80000000, 0xbfe28f5c, 0x28f5c28a},			/* 1.17296=f(-0.58000)*/
-{12, 0,123,__LINE__, 0x3ff2ab9b, 0x60000000, 0xbfe23d70, 0xa3d70a38},			/* 1.16689=f(-0.57000)*/
-{12, 0,123,__LINE__, 0x3ff29336, 0xa0000000, 0xbfe1eb85, 0x1eb851e6},			/* 1.16094=f(-0.56000)*/
-{12, 0,123,__LINE__, 0x3ff27b4b, 0xa0000000, 0xbfe19999, 0x99999994},			/* 1.15510=f(-0.55000)*/
-{12, 0,123,__LINE__, 0x3ff263d9, 0xc0000000, 0xbfe147ae, 0x147ae142},			/* 1.14937=f(-0.54000)*/
-{12, 0,123,__LINE__, 0x3ff24ce0, 0x60000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 1.14376=f(-0.53000)*/
-{12, 0,123,__LINE__, 0x3ff2365e, 0xe0000000, 0xbfe0a3d7, 0x0a3d709e},			/* 1.13827=f(-0.52000)*/
-{12, 0,123,__LINE__, 0x3ff22054, 0xe0000000, 0xbfe051eb, 0x851eb84c},			/* 1.13289=f(-0.51000)*/
-{12, 0,123,__LINE__, 0x3ff20ac1, 0x80000000, 0xbfdfffff, 0xfffffff4},			/* 1.12762=f(-0.50000)*/
-{12, 0,123,__LINE__, 0x3ff1f5a4, 0x80000000, 0xbfdf5c28, 0xf5c28f50},			/* 1.12247=f(-0.49000)*/
-{12, 0,123,__LINE__, 0x3ff1e0fd, 0x20000000, 0xbfdeb851, 0xeb851eac},			/* 1.11742=f(-0.48000)*/
-{12, 0,123,__LINE__, 0x3ff1cccb, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 1.11249=f(-0.47000)*/
-{12, 0,123,__LINE__, 0x3ff1b90d, 0x60000000, 0xbfdd70a3, 0xd70a3d64},			/* 1.10767=f(-0.46000)*/
-{12, 0,123,__LINE__, 0x3ff1a5c4, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 1.10297=f(-0.45000)*/
-{12, 0,123,__LINE__, 0x3ff192ee, 0x60000000, 0xbfdc28f5, 0xc28f5c1c},			/* 1.09837=f(-0.44000)*/
-{12, 0,123,__LINE__, 0x3ff1808b, 0xc0000000, 0xbfdb851e, 0xb851eb78},			/* 1.09388=f(-0.43000)*/
-{12, 0,123,__LINE__, 0x3ff16e9c, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 1.08950=f(-0.42000)*/
-{12, 0,123,__LINE__, 0x3ff15d1e, 0x60000000, 0xbfda3d70, 0xa3d70a30},			/* 1.08523=f(-0.41000)*/
-{12, 0,123,__LINE__, 0x3ff14c12, 0x80000000, 0xbfd99999, 0x9999998c},			/* 1.08107=f(-0.40000)*/
-{12, 0,123,__LINE__, 0x3ff13b78, 0x20000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.07701=f(-0.39000)*/
-{12, 0,123,__LINE__, 0x3ff12b4e, 0xa0000000, 0xbfd851eb, 0x851eb844},			/* 1.07307=f(-0.38000)*/
-{12, 0,123,__LINE__, 0x3ff11b95, 0xa0000000, 0xbfd7ae14, 0x7ae147a0},			/* 1.06923=f(-0.37000)*/
-{12, 0,123,__LINE__, 0x3ff10c4c, 0xc0000000, 0xbfd70a3d, 0x70a3d6fc},			/* 1.06550=f(-0.36000)*/
-{12, 0,123,__LINE__, 0x3ff0fd73, 0xa0000000, 0xbfd66666, 0x66666658},			/* 1.06187=f(-0.35000)*/
-{12, 0,123,__LINE__, 0x3ff0ef09, 0xe0000000, 0xbfd5c28f, 0x5c28f5b4},			/* 1.05835=f(-0.34000)*/
-{12, 0,123,__LINE__, 0x3ff0e10f, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 1.05494=f(-0.33000)*/
-{12, 0,123,__LINE__, 0x3ff0d382, 0xc0000000, 0xbfd47ae1, 0x47ae146c},			/* 1.05163=f(-0.32000)*/
-{12, 0,123,__LINE__, 0x3ff0c664, 0xe0000000, 0xbfd3d70a, 0x3d70a3c8},			/* 1.04843=f(-0.31000)*/
-{12, 0,123,__LINE__, 0x3ff0b9b4, 0xe0000000, 0xbfd33333, 0x33333324},			/* 1.04533=f(-0.30000)*/
-{12, 0,123,__LINE__, 0x3ff0ad72, 0x80000000, 0xbfd28f5c, 0x28f5c280},			/* 1.04234=f(-0.29000)*/
-{12, 0,123,__LINE__, 0x3ff0a19d, 0x80000000, 0xbfd1eb85, 0x1eb851dc},			/* 1.03945=f(-0.28000)*/
-{12, 0,123,__LINE__, 0x3ff09635, 0x60000000, 0xbfd147ae, 0x147ae138},			/* 1.03667=f(-0.27000)*/
-{12, 0,123,__LINE__, 0x3ff08b3a, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 1.03399=f(-0.26000)*/
-{12, 0,123,__LINE__, 0x3ff080ab, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 1.03141=f(-0.25000)*/
-{12, 0,123,__LINE__, 0x3ff07688, 0x40000000, 0xbfceb851, 0xeb851e98},			/* 1.02893=f(-0.24000)*/
-{12, 0,123,__LINE__, 0x3ff06cd1, 0x60000000, 0xbfcd70a3, 0xd70a3d50},			/* 1.02656=f(-0.23000)*/
-{12, 0,123,__LINE__, 0x3ff06386, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 1.02429=f(-0.22000)*/
-{12, 0,123,__LINE__, 0x3ff05aa6, 0x20000000, 0xbfcae147, 0xae147ac0},			/* 1.02213=f(-0.21000)*/
-{12, 0,123,__LINE__, 0x3ff05231, 0x80000000, 0xbfc99999, 0x99999978},			/* 1.02006=f(-0.20000)*/
-{12, 0,123,__LINE__, 0x3ff04a27, 0xc0000000, 0xbfc851eb, 0x851eb830},			/* 1.01810=f(-0.19000)*/
-{12, 0,123,__LINE__, 0x3ff04288, 0xe0000000, 0xbfc70a3d, 0x70a3d6e8},			/* 1.01624=f(-0.18000)*/
-{12, 0,123,__LINE__, 0x3ff03b54, 0x60000000, 0xbfc5c28f, 0x5c28f5a0},			/* 1.01448=f(-0.17000)*/
-{12, 0,123,__LINE__, 0x3ff0348a, 0x60000000, 0xbfc47ae1, 0x47ae1458},			/* 1.01282=f(-0.16000)*/
-{12, 0,123,__LINE__, 0x3ff02e2a, 0xa0000000, 0xbfc33333, 0x33333310},			/* 1.01127=f(-0.15000)*/
-{12, 0,123,__LINE__, 0x3ff02834, 0xe0000000, 0xbfc1eb85, 0x1eb851c8},			/* 1.00981=f(-0.14000)*/
-{12, 0,123,__LINE__, 0x3ff022a9, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 1.00846=f(-0.13000)*/
-{12, 0,123,__LINE__, 0x3ff01d86, 0xc0000000, 0xbfbeb851, 0xeb851e71},			/* 1.00720=f(-0.12000)*/
-{12, 0,123,__LINE__, 0x3ff018ce, 0x40000000, 0xbfbc28f5, 0xc28f5be2},			/* 1.00605=f(-0.11000)*/
-{12, 0,123,__LINE__, 0x3ff0147f, 0x40000000, 0xbfb99999, 0x99999953},			/* 1.00500=f(-0.00100)*/
-{12, 0,123,__LINE__, 0x3ff01099, 0xa0000000, 0xbfb70a3d, 0x70a3d6c4},			/* 1.00405=f(-0.09000)*/
-{12, 0,123,__LINE__, 0x3ff00d1d, 0x40000000, 0xbfb47ae1, 0x47ae1435},			/* 1.00320=f(-0.08000)*/
-{12, 0,123,__LINE__, 0x3ff00a0a, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 1.00245=f(-0.07000)*/
-{12, 0,123,__LINE__, 0x3ff00760, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 1.00180=f(-0.06000)*/
-{12, 0,123,__LINE__, 0x3ff0051f, 0x00000000, 0xbfa99999, 0x9999990e},			/* 1.00125=f(-0.05000)*/
-{12, 0,123,__LINE__, 0x3ff00347, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 1.00080=f(-0.04000)*/
-{12, 0,123,__LINE__, 0x3ff001d7, 0xe0000000, 0xbf9eb851, 0xeb851da0},			/* 1.00045=f(-0.03000)*/
-{12, 0,123,__LINE__, 0x3ff000d1, 0xc0000000, 0xbf947ae1, 0x47ae1362},			/* 1.00020=f(-0.02000)*/
-{12, 0,123,__LINE__, 0x3ff00034, 0x60000000, 0xbf847ae1, 0x47ae1249},			/* 1.00005=f(-0.00010)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{12, 0,123,__LINE__, 0x3ff00034, 0x60000000, 0x3f847ae1, 0x47ae16ad},			/* 1.00005=f(0.01000)*/
-{12, 0,123,__LINE__, 0x3ff000d1, 0xc0000000, 0x3f947ae1, 0x47ae1594},			/* 1.00020=f(0.02000)*/
-{12, 0,123,__LINE__, 0x3ff001d7, 0xe0000000, 0x3f9eb851, 0xeb851fd2},			/* 1.00045=f(0.03000)*/
-{12, 0,123,__LINE__, 0x3ff00347, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 1.00080=f(0.04000)*/
-{12, 0,123,__LINE__, 0x3ff0051f, 0x00000000, 0x3fa99999, 0x99999a27},			/* 1.00125=f(0.05000)*/
-{12, 0,123,__LINE__, 0x3ff00760, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 1.00180=f(0.06000)*/
-{12, 0,123,__LINE__, 0x3ff00a0a, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 1.00245=f(0.07000)*/
-{12, 0,123,__LINE__, 0x3ff00d1d, 0x40000000, 0x3fb47ae1, 0x47ae14c1},			/* 1.00320=f(0.08000)*/
-{12, 0,123,__LINE__, 0x3ff01099, 0xa0000000, 0x3fb70a3d, 0x70a3d750},			/* 1.00405=f(0.09000)*/
-{12, 0,123,__LINE__, 0x3ff0147f, 0x40000000, 0x3fb99999, 0x999999df},			/* 1.00500=f(0.10000)*/
-{12, 0,123,__LINE__, 0x3ff018ce, 0x40000000, 0x3fbc28f5, 0xc28f5c6e},			/* 1.00605=f(0.11000)*/
-{12, 0,123,__LINE__, 0x3ff01d86, 0xc0000000, 0x3fbeb851, 0xeb851efd},			/* 1.00720=f(0.12000)*/
-{12, 0,123,__LINE__, 0x3ff022a9, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.00846=f(0.13000)*/
-{12, 0,123,__LINE__, 0x3ff02834, 0xe0000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.00981=f(0.14000)*/
-{12, 0,123,__LINE__, 0x3ff02e2a, 0xa0000000, 0x3fc33333, 0x33333356},			/* 1.01127=f(0.15000)*/
-{12, 0,123,__LINE__, 0x3ff0348a, 0x60000000, 0x3fc47ae1, 0x47ae149e},			/* 1.01282=f(0.16000)*/
-{12, 0,123,__LINE__, 0x3ff03b54, 0x60000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.01448=f(0.17000)*/
-{12, 0,123,__LINE__, 0x3ff04288, 0xe0000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.01624=f(0.18000)*/
-{12, 0,123,__LINE__, 0x3ff04a27, 0xc0000000, 0x3fc851eb, 0x851eb876},			/* 1.01810=f(0.19000)*/
-{12, 0,123,__LINE__, 0x3ff05231, 0x80000000, 0x3fc99999, 0x999999be},			/* 1.02006=f(0.20000)*/
-{12, 0,123,__LINE__, 0x3ff05aa6, 0x20000000, 0x3fcae147, 0xae147b06},			/* 1.02213=f(0.21000)*/
-{12, 0,123,__LINE__, 0x3ff06386, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.02429=f(0.22000)*/
-{12, 0,123,__LINE__, 0x3ff06cd1, 0x60000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.02656=f(0.23000)*/
-{12, 0,123,__LINE__, 0x3ff07688, 0x40000000, 0x3fceb851, 0xeb851ede},			/* 1.02893=f(0.24000)*/
-{12, 0,123,__LINE__, 0x3ff080ab, 0x00000000, 0x3fd00000, 0x00000013},			/* 1.03141=f(0.25000)*/
-{12, 0,123,__LINE__, 0x3ff08b3a, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.03399=f(0.26000)*/
-{12, 0,123,__LINE__, 0x3ff09635, 0x60000000, 0x3fd147ae, 0x147ae15b},			/* 1.03667=f(0.27000)*/
-{12, 0,123,__LINE__, 0x3ff0a19d, 0x80000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.03945=f(0.28000)*/
-{12, 0,123,__LINE__, 0x3ff0ad72, 0x80000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.04234=f(0.29000)*/
-{12, 0,123,__LINE__, 0x3ff0b9b4, 0xe0000000, 0x3fd33333, 0x33333347},			/* 1.04533=f(0.30000)*/
-{12, 0,123,__LINE__, 0x3ff0c664, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.04843=f(0.31000)*/
-{12, 0,123,__LINE__, 0x3ff0d382, 0xc0000000, 0x3fd47ae1, 0x47ae148f},			/* 1.05163=f(0.32000)*/
-{12, 0,123,__LINE__, 0x3ff0e10f, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 1.05494=f(0.33000)*/
-{12, 0,123,__LINE__, 0x3ff0ef09, 0xe0000000, 0x3fd5c28f, 0x5c28f5d7},			/* 1.05835=f(0.34000)*/
-{12, 0,123,__LINE__, 0x3ff0fd73, 0xa0000000, 0x3fd66666, 0x6666667b},			/* 1.06187=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3ff10c4c, 0xc0000000, 0x3fd70a3d, 0x70a3d71f},			/* 1.06550=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3ff11b95, 0xa0000000, 0x3fd7ae14, 0x7ae147c3},			/* 1.06923=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3ff12b4e, 0xa0000000, 0x3fd851eb, 0x851eb867},			/* 1.07307=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3ff13b78, 0x20000000, 0x3fd8f5c2, 0x8f5c290b},			/* 1.07701=f(0.39000)*/
-{12, 0,123,__LINE__, 0x3ff14c12, 0x80000000, 0x3fd99999, 0x999999af},			/* 1.08107=f(0.40000)*/
-{12, 0,123,__LINE__, 0x3ff15d1e, 0x60000000, 0x3fda3d70, 0xa3d70a53},			/* 1.08523=f(0.41000)*/
-{12, 0,123,__LINE__, 0x3ff16e9c, 0x00000000, 0x3fdae147, 0xae147af7},			/* 1.08950=f(0.42000)*/
-{12, 0,123,__LINE__, 0x3ff1808b, 0xc0000000, 0x3fdb851e, 0xb851eb9b},			/* 1.09388=f(0.43000)*/
-{12, 0,123,__LINE__, 0x3ff192ee, 0x60000000, 0x3fdc28f5, 0xc28f5c3f},			/* 1.09837=f(0.44000)*/
-{12, 0,123,__LINE__, 0x3ff1a5c4, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 1.10297=f(0.45000)*/
-{12, 0,123,__LINE__, 0x3ff1b90d, 0x60000000, 0x3fdd70a3, 0xd70a3d87},			/* 1.10767=f(0.46000)*/
-{12, 0,123,__LINE__, 0x3ff1cccb, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 1.11249=f(0.47000)*/
-{12, 0,123,__LINE__, 0x3ff1e0fd, 0x20000000, 0x3fdeb851, 0xeb851ecf},			/* 1.11742=f(0.48000)*/
-{12, 0,123,__LINE__, 0x3ff1f5a4, 0x80000000, 0x3fdf5c28, 0xf5c28f73},			/* 1.12247=f(0.49000)*/
-{12, 0,123,__LINE__, 0x3ff20ac1, 0x80000000, 0x3fe00000, 0x0000000b},			/* 1.12762=f(0.50000)*/
-{12, 0,123,__LINE__, 0x3ff22054, 0xe0000000, 0x3fe051eb, 0x851eb85d},			/* 1.13289=f(0.51000)*/
-{12, 0,123,__LINE__, 0x3ff2365e, 0xe0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 1.13827=f(0.52000)*/
-{12, 0,123,__LINE__, 0x3ff24ce0, 0x60000000, 0x3fe0f5c2, 0x8f5c2901},			/* 1.14376=f(0.53000)*/
-{12, 0,123,__LINE__, 0x3ff263d9, 0xc0000000, 0x3fe147ae, 0x147ae153},			/* 1.14937=f(0.54000)*/
-{12, 0,123,__LINE__, 0x3ff27b4b, 0xa0000000, 0x3fe19999, 0x999999a5},			/* 1.15510=f(0.55000)*/
-{12, 0,123,__LINE__, 0x3ff29336, 0xa0000000, 0x3fe1eb85, 0x1eb851f7},			/* 1.16094=f(0.56000)*/
-{12, 0,123,__LINE__, 0x3ff2ab9b, 0x60000000, 0x3fe23d70, 0xa3d70a49},			/* 1.16689=f(0.57000)*/
-{12, 0,123,__LINE__, 0x3ff2c47a, 0x80000000, 0x3fe28f5c, 0x28f5c29b},			/* 1.17296=f(0.58000)*/
-{12, 0,123,__LINE__, 0x3ff2ddd4, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 1.17915=f(0.59000)*/
-{12, 0,123,__LINE__, 0x3ff2f7aa, 0x60000000, 0x3fe33333, 0x3333333f},			/* 1.18546=f(0.60000)*/
-{12, 0,123,__LINE__, 0x3ff311fc, 0x80000000, 0x3fe3851e, 0xb851eb91},			/* 1.19189=f(0.61000)*/
-{12, 0,123,__LINE__, 0x3ff32ccb, 0x80000000, 0x3fe3d70a, 0x3d70a3e3},			/* 1.19843=f(0.62000)*/
-{12, 0,123,__LINE__, 0x3ff34818, 0x20000000, 0x3fe428f5, 0xc28f5c35},			/* 1.20510=f(0.63000)*/
-{12, 0,123,__LINE__, 0x3ff363e3, 0x40000000, 0x3fe47ae1, 0x47ae1487},			/* 1.21188=f(0.64000)*/
-{12, 0,123,__LINE__, 0x3ff3802d, 0x60000000, 0x3fe4cccc, 0xccccccd9},			/* 1.21879=f(0.65000)*/
-{12, 0,123,__LINE__, 0x3ff39cf7, 0x60000000, 0x3fe51eb8, 0x51eb852b},			/* 1.22582=f(0.66000)*/
-{12, 0,123,__LINE__, 0x3ff3ba41, 0xe0000000, 0x3fe570a3, 0xd70a3d7d},			/* 1.23297=f(0.67000)*/
-{12, 0,123,__LINE__, 0x3ff3d80d, 0xa0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 1.24024=f(0.68000)*/
-{12, 0,123,__LINE__, 0x3ff3f65b, 0x80000000, 0x3fe6147a, 0xe147ae21},			/* 1.24764=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3ff4152c, 0x20000000, 0x3fe66666, 0x66666673},			/* 1.25516=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3ff43480, 0x40000000, 0x3fe6b851, 0xeb851ec5},			/* 1.26281=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3ff45459, 0x20000000, 0x3fe70a3d, 0x70a3d717},			/* 1.27059=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3ff474b7, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 1.27849=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3ff4959a, 0xe0000000, 0x3fe7ae14, 0x7ae147bb},			/* 1.28652=f(0.74000)*/
-{12, 0,123,__LINE__, 0x3ff4b705, 0xc0000000, 0x3fe80000, 0x0000000d},			/* 1.29468=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3ff4d8f8, 0x60000000, 0x3fe851eb, 0x851eb85f},			/* 1.30297=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3ff4fb73, 0xa0000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 1.31139=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3ff51e78, 0x80000000, 0x3fe8f5c2, 0x8f5c2903},			/* 1.31993=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3ff54207, 0xc0000000, 0x3fe947ae, 0x147ae155},			/* 1.32862=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3ff56622, 0x40000000, 0x3fe99999, 0x999999a7},			/* 1.33743=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3ff58ac9, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 1.34638=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3ff5affc, 0xe0000000, 0x3fea3d70, 0xa3d70a4b},			/* 1.35546=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3ff5d5be, 0xc0000000, 0x3fea8f5c, 0x28f5c29d},			/* 1.36468=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3ff5fc0f, 0xe0000000, 0x3feae147, 0xae147aef},			/* 1.37403=f(0.84000)*/
-{12, 0,123,__LINE__, 0x3ff622f1, 0x40000000, 0x3feb3333, 0x33333341},			/* 1.38353=f(0.85000)*/
-{12, 0,123,__LINE__, 0x3ff64a63, 0x80000000, 0x3feb851e, 0xb851eb93},			/* 1.39316=f(0.86000)*/
-{12, 0,123,__LINE__, 0x3ff67268, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 1.40293=f(0.87000)*/
-{12, 0,123,__LINE__, 0x3ff69aff, 0x80000000, 0x3fec28f5, 0xc28f5c37},			/* 1.41284=f(0.88000)*/
-{12, 0,123,__LINE__, 0x3ff6c42b, 0x20000000, 0x3fec7ae1, 0x47ae1489},			/* 1.42289=f(0.89000)*/
-{12, 0,123,__LINE__, 0x3ff6edec, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 1.43308=f(0.90000)*/
-{12, 0,123,__LINE__, 0x3ff71843, 0x20000000, 0x3fed1eb8, 0x51eb852d},			/* 1.44342=f(0.91000)*/
-{12, 0,123,__LINE__, 0x3ff74331, 0x80000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.45390=f(0.92000)*/
-{12, 0,123,__LINE__, 0x3ff76eb8, 0x80000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.46453=f(0.93000)*/
-{12, 0,123,__LINE__, 0x3ff79ad9, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 1.47530=f(0.94000)*/
-{12, 0,123,__LINE__, 0x3ff7c794, 0x20000000, 0x3fee6666, 0x66666675},			/* 1.48622=f(0.95000)*/
-{12, 0,123,__LINE__, 0x3ff7f4eb, 0x40000000, 0x3feeb851, 0xeb851ec7},			/* 1.49729=f(0.96000)*/
-{13, 0,123,__LINE__, 0x3ff822df, 0x60000000, 0x3fef0a3d, 0x70a3d719},			/* 1.50851=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3ff85171, 0xa0000000, 0x3fef5c28, 0xf5c28f6b},			/* 1.51988=f(0.98000)*/
-{13, 0,123,__LINE__, 0x3ff880a3, 0x40000000, 0x3fefae14, 0x7ae147bd},			/* 1.53140=f(0.99000)*/
-{13, 0,123,__LINE__, 0x3ff8b075, 0x40000000, 0x3ff00000, 0x00000007},			/* 1.54308=f(1.00000)*/
-{13, 0,123,__LINE__, 0x3ff8e0e9, 0x40000000, 0x3ff028f5, 0xc28f5c30},			/* 1.55491=f(1.01000)*/
-{13, 0,123,__LINE__, 0x3ff91200, 0x60000000, 0x3ff051eb, 0x851eb859},			/* 1.56689=f(1.02000)*/
-{13, 0,123,__LINE__, 0x3ff943bb, 0xa0000000, 0x3ff07ae1, 0x47ae1482},			/* 1.57903=f(1.03000)*/
-{13, 0,123,__LINE__, 0x3ff9761c, 0xa0000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.59133=f(1.04000)*/
-{13, 0,123,__LINE__, 0x3ff9a924, 0x40000000, 0x3ff0cccc, 0xccccccd4},			/* 1.60379=f(1.05000)*/
-{13, 0,123,__LINE__, 0x3ff9dcd4, 0x40000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.61641=f(1.06000)*/
-{13, 0,123,__LINE__, 0x3ffa112d, 0xc0000000, 0x3ff11eb8, 0x51eb8526},			/* 1.62919=f(1.07000)*/
-{13, 0,123,__LINE__, 0x3ffa4632, 0x20000000, 0x3ff147ae, 0x147ae14f},			/* 1.64213=f(1.08000)*/
-{13, 0,123,__LINE__, 0x3ffa7be2, 0xa0000000, 0x3ff170a3, 0xd70a3d78},			/* 1.65524=f(1.09000)*/
-{13, 0,123,__LINE__, 0x3ffab240, 0xa0000000, 0x3ff19999, 0x999999a1},			/* 1.66851=f(1.10000)*/
-{13, 0,123,__LINE__, 0x3ffae94d, 0x80000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.68195=f(1.11000)*/
-{13, 0,123,__LINE__, 0x3ffb210b, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.69556=f(1.12000)*/
-{13, 0,123,__LINE__, 0x3ffb597a, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 1.70934=f(1.13000)*/
-{13, 0,123,__LINE__, 0x3ffb929c, 0x60000000, 0x3ff23d70, 0xa3d70a45},			/* 1.72329=f(1.14000)*/
-{13, 0,123,__LINE__, 0x3ffbcc73, 0x80000000, 0x3ff26666, 0x6666666e},			/* 1.73741=f(1.15000)*/
-{14, 0,123,__LINE__, 0x3ffc0700, 0xa0000000, 0x3ff28f5c, 0x28f5c297},			/* 1.75171=f(1.16000)*/
-{14, 0,123,__LINE__, 0x3ffc4245, 0xa0000000, 0x3ff2b851, 0xeb851ec0},			/* 1.76618=f(1.17000)*/
-{14, 0,123,__LINE__, 0x3ffc7e43, 0xe0000000, 0x3ff2e147, 0xae147ae9},			/* 1.78082=f(1.18000)*/
-{14, 0,123,__LINE__, 0x3ffcbafc, 0xe0000000, 0x3ff30a3d, 0x70a3d712},			/* 1.79565=f(1.19000)*/
-{ 9, 0,123,__LINE__, 0x4070bbf2, 0x80000000, 0xc01921fb, 0x54442d18},			/* 267.746=f(-6.28318)*/
-{ 9, 0,123,__LINE__, 0x404bd4e9, 0x80000000, 0xc012d97c, 0x7f3321d2},			/* 55.6633=f(-4.71238)*/
-{ 8, 0,123,__LINE__, 0x40272f14, 0x80000000, 0xc00921fb, 0x54442d18},			/* 11.5919=f(-3.14159)*/
-{ 1, 0,123,__LINE__, 0x400412cc, 0x40000000, 0xbff921fb, 0x54442d18},			/* 2.50917=f(-1.57079)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{ 1, 0,123,__LINE__, 0x400412cc, 0x40000000, 0x3ff921fb, 0x54442d18},			/* 2.50917=f(1.57079)*/
-{ 8, 0,123,__LINE__, 0x40272f14, 0x80000000, 0x400921fb, 0x54442d18},			/* 11.5919=f(3.14159)*/
-{ 9, 0,123,__LINE__, 0x404bd4e9, 0x80000000, 0x4012d97c, 0x7f3321d2},			/* 55.6633=f(4.71238)*/
-{ 6, 0,123,__LINE__, 0x42937046, 0x40000000, 0xc03e0000, 0x00000000},			/* 5.34323e+12=f(-30.0000)*/
-{ 6, 0,123,__LINE__, 0x426c68a8, 0x80000000, 0xc03c4ccc, 0xcccccccd},			/* 9.76120e+11=f(-28.3000)*/
-{ 6, 0,123,__LINE__, 0x4244c263, 0x20000000, 0xc03a9999, 0x9999999a},			/* 1.78321e+11=f(-26.6000)*/
-{ 6, 0,123,__LINE__, 0x421e56cc, 0x40000000, 0xc038e666, 0x66666667},			/* 3.25763e+10=f(-24.9000)*/
-{ 7, 0,123,__LINE__, 0x41f62b78, 0xe0000000, 0xc0373333, 0x33333334},			/* 5.95116e+09=f(-23.2000)*/
-{ 7, 0,123,__LINE__, 0x41d03342, 0xe0000000, 0xc0358000, 0x00000001},			/* 1.08718e+09=f(-21.5000)*/
-{ 7, 0,123,__LINE__, 0x41a7ad15, 0x80000000, 0xc033cccc, 0xccccccce},			/* 1.98610e+08=f(-19.8000)*/
-{ 7, 0,123,__LINE__, 0x41814d0b, 0xe0000000, 0xc0321999, 0x9999999b},			/* 3.62827e+07=f(-18.1000)*/
-{ 7, 0,123,__LINE__, 0x415948e7, 0x20000000, 0xc0306666, 0x66666668},			/* 6.62825e+06=f(-16.4000)*/
-{ 7, 0,123,__LINE__, 0x413279fa, 0x40000000, 0xc02d6666, 0x6666666a},			/* 1.21087e+06=f(-14.7000)*/
-{ 7, 0,123,__LINE__, 0x410b00b6, 0x80000000, 0xc02a0000, 0x00000004},			/* 221206=f(-13.0000)*/
-{ 8, 0,123,__LINE__, 0x40e3bb5a, 0x20000000, 0xc0269999, 0x9999999e},			/* 40410=f(-11.3000)*/
-{ 8, 0,123,__LINE__, 0x40bcd664, 0x40000000, 0xc0233333, 0x33333338},			/* 7382.39=f(-9.60000)*/
-{ 8, 0,123,__LINE__, 0x40951291, 0x20000000, 0xc01f9999, 0x999999a3},			/* 1348.64=f(-7.90000)*/
-{ 9, 0,123,__LINE__, 0x406ecc03, 0xa0000000, 0xc018cccc, 0xccccccd6},			/* 246.375=f(-6.20000)*/
-{ 9, 0,123,__LINE__, 0x404681ce, 0xc0000000, 0xc0120000, 0x00000009},			/* 45.0141=f(-4.50000)*/
-{11, 0,123,__LINE__, 0x40208165, 0xa0000000, 0xc0066666, 0x66666678},			/* 8.25272=f(-2.80000)*/
-{13, 0,123,__LINE__, 0x3ffab240, 0xa0000000, 0xbff19999, 0x999999bd},			/* 1.66851=f(-1.10000)*/
-{12, 0,123,__LINE__, 0x3ff2f7aa, 0x60000000, 0x3fe33333, 0x333332ec},			/* 1.18546=f(0.60000)*/
-{11, 0,123,__LINE__, 0x4014261d, 0x20000000, 0x40026666, 0x66666654},			/* 5.03722=f(2.30000)*/
-{10, 0,123,__LINE__, 0x403b4ee8, 0x20000000, 0x400fffff, 0xffffffee},			/* 27.3082=f(4.00000)*/
-{ 9, 0,123,__LINE__, 0x4062adee, 0x40000000, 0x4016cccc, 0xccccccc4},			/* 149.435=f(5.70000)*/
-{ 8, 0,123,__LINE__, 0x40898ff0, 0xa0000000, 0x401d9999, 0x99999991},			/* 817.992=f(7.40000)*/
-{ 8, 0,123,__LINE__, 0x40b17da6, 0x20000000, 0x40223333, 0x3333332f},			/* 4477.64=f(9.10000)*/
-{ 8, 0,123,__LINE__, 0x40d7ef9a, 0x60000000, 0x40259999, 0x99999995},			/* 24510=f(10.8000)*/
-{ 7, 0,123,__LINE__, 0x410060c5, 0x80000000, 0x4028ffff, 0xfffffffb},			/* 134168=f(12.5000)*/
-{ 7, 0,123,__LINE__, 0x412669c0, 0x80000000, 0x402c6666, 0x66666661},			/* 734432=f(14.2000)*/
-{ 7, 0,123,__LINE__, 0x414eac09, 0x80000000, 0x402fcccc, 0xccccccc7},			/* 4.02024e+06=f(15.9000)*/
-{ 7, 0,123,__LINE__, 0x4174fcb4, 0x40000000, 0x40319999, 0x99999997},			/* 2.20066e+07=f(17.6000)*/
-{ 7, 0,123,__LINE__, 0x419cb879, 0x60000000, 0x40334ccc, 0xccccccca},			/* 1.20463e+08=f(19.3000)*/
-{ 7, 0,123,__LINE__, 0x41c3a6e1, 0xa0000000, 0x4034ffff, 0xfffffffd},			/* 6.59408e+08=f(21.0000)*/
-{ 7, 0,123,__LINE__, 0x41eae4b4, 0x20000000, 0x4036b333, 0x33333330},			/* 3.60957e+09=f(22.7000)*/
-{ 6, 0,123,__LINE__, 0x421266cf, 0xe0000000, 0x40386666, 0x66666663},			/* 1.97586e+10=f(24.4000)*/
-{ 6, 0,123,__LINE__, 0x42392ead, 0x00000000, 0x403a1999, 0x99999996},			/* 1.08157e+11=f(26.1000)*/
-{ 6, 0,123,__LINE__, 0x42613b16, 0xc0000000, 0x403bcccc, 0xccccccc9},			/* 5.92046e+11=f(27.8000)*/
-{ 6, 0,123,__LINE__, 0x42879486, 0x60000000, 0x403d7fff, 0xfffffffc},			/* 3.24083e+12=f(29.5000)*/
-0,};
-test_coshf(m)   {run_vector_1(m,coshf_vec,(char *)(coshf),"coshf","ff");   }	
diff --git a/newlib/libm/test/dcvt.c b/newlib/libm/test/dcvt.c
deleted file mode 100644
index 2aaa1af28..000000000
--- a/newlib/libm/test/dcvt.c
+++ /dev/null
@@ -1,605 +0,0 @@
-
-
-#include <limits.h>
-#include <math.h>
-#include <stdio.h>
-#include <float.h>
-#include <ieeefp.h>
-#include <stdlib.h>
-#include <string.h>
-#define _MAX_CHARS 512
-
-static char *lcset = "0123456789abcdef";
-
-static struct p {
-	double pvalue, nvalue;
-	int exp;
-} powers[] = 
-{ 
-{ 1e32, 1e-32, 32},
-{ 1e16, 1e-16, 16},
-{ 1e8, 1e-8, 8},
-{ 1e4, 1e-4, 4},
-{ 1e2, 1e-2, 2},
-{ 1e1, 1e-1, 1 },
-{ 1e0, 1e-0, 0 }
-};
-
-#define _MAX_PREC 16
-
-static char 
-_DEFUN(nextdigit,(value),
-double *value)
-{
-  double tmp;
-  
-  *value = modf (*value * 10, &tmp) ;
-  return  lcset[(int)tmp];
-}
-
-
-static char *
-_DEFUN(print_nan,(buffer, value, precision),
-       char *buffer _AND
-       double value _AND
-       int precision)
-{
-  size_t  i;
-  
-  if (isnan(value))
-    {
-      strcpy(buffer, "nan");
-      i = 3;
-    
-    }
-  else 
-    {
-      strcpy(buffer, "infinity");
-      i = 8;
-    }
-
-  while (i < precision) 
-    {
-      buffer[i++] = ' ';
-    }
-  buffer[i++] = 0;
-  return buffer;
-  
-}
-
-/* A convert info struct */
-typedef struct 
-{
-  char *buffer ;		/* Destination of conversion */
-  double value;			/* scratch Value to convert */
-  double original_value;	/* saved Value to convert */
-  int value_neg;		/* OUT: 1 if value initialiy neg */
-  int abs_exp;			/* abs Decimal exponent of value */
-  int abs_exp_sign;		/* + or - */
-  int exp;			/* exp not sgned */
-  int type;			/* fFeEgG used in printing before exp */
-
-  int print_trailing_zeros;     /* Print 00's after a . */
-  
-  int null_idx;  /* Index of the null at the end */
-  
-/* These ones are read only */
-  int decimal_places;		/* the number of digits to print after
-				   the decimal */
-  int max_digits;		/* total number of digits to print */
-  int buffer_size;              /* Size of output buffer */
-  
-  /* Two sorts of dot ness.
-     0  never ever print a dot
-     1  print a dot if followed by a digit 
-     2  always print a dot, even if no digit following
-     */
-  enum { dot_never, dot_sometimes, dot_always} dot; /* Print a decimal point, always */
-  int dot_idx;			/* where the dot went, or would have gone */
-} cvt_info_type;
-
-
-void
-_DEFUN(renormalize,(in),
-       cvt_info_type *in)
-{
-
-  /* Make sure all numbers are less than 1 */
-
-  while (in->value >= 1.0) 
-  {
-    in->value = in->value * 0.1;
-    in->exp++;
-  }
-
-  /* Now we have only numbers between 0 and .9999.., and have adjusted
-     exp to account for the shift */  
-
-  if (in->exp >= 0)
-  {
-    in->abs_exp_sign = '+';
-    in->abs_exp = in->exp;
-  }
-  else 
-  {
-    in->abs_exp_sign  = '-';
-    in->abs_exp = -in->exp;
-  }
-
-}
-
-/* This routine looks at original_value, and makes it between 0 and 1,
-   modifying exp as it goes
- */
-
-static void 
-_DEFUN(normalize,(value, in),
-       double value _AND
-       cvt_info_type *in)
-{
-  int j;
-  int texp;
-  if (value != 0) 
-  {
-     texp = -1;
-
-  
-  if (value < 0.0) 
-  {
-    in->value_neg =1 ;
-    value = - value;
-  }
-  else 
-  {
-    in->value_neg = 0;
-  }
-
-		
-  /* Work out texponent & normalise value */
-
-  /* If value > 1, then shrink it */
-  if (value >= 1.0) 
-  {
-    for (j = 0; j < 6; j++) 
-    {
-      while (value >= powers[j].pvalue) 
-      {
-	value /= powers[j].pvalue;
-	texp += powers[j].exp;
-      }
-    }
-  }
-  else if (value != 0.0) 
-  {
-    for (j = 0; j < 6; j++) 
-    {
-      while (value <= powers[j].nvalue) 
-      {
-	value *= powers[j].pvalue;
-	texp -= powers[j].exp;
-      }
-    }
-  }
-   }
-  
-  else
-  {
-    texp = 0;
-  }
-  
-
-  in->exp = texp;
-  in->value = value;
-  in->original_value = value;  
-  renormalize(in);
-  
-}
-int
-_DEFUN(round,(in, start, now, ch),
-       cvt_info_type *in _AND
-       char *start _AND
-       char *now _AND
-       char ch)
-{
-  double rounder = 5.0;
-
-  char *p;
-  int ok = 0;
-
-  now --;
-
-  /* If the next digit to output would have been a '5' run back and */
-  /* see if we can create a more rounded number. If we can then do it.
-     If not (like when the number was 9.9 and the last char was
-     another 9), then we'll have to modify the number and try again */
-  if (ch < '5') 
-   return 0;
-  
-
-  for (p = now;!ok && p >= start; p--) 
-  {
-    switch (*p) 
-    {
-    default:
-      abort();
-    case '.':
-      break;
-    case '9':
-      rounder = rounder * 0.1;
-      break;
-    case '8':
-    case '7':
-    case '6':
-    case '5':
-    case '4':
-    case '3':
-    case '2':
-    case '1':
-    case '0':
-      p = now;
-      while (1) {
-	  if (*p == '9') {
-	      *p = '0';
-	    }
-	  else if (*p != '.') {
-	      (*p)++;
-	      return 0;
-	    }
-	  p--;
-	}
-    }
-
-  }
-
-  /* Getting here means that we couldn't round the number in place
-     textually - there have been all nines.
-     We'll have to add to it and try the conversion again
-     eg
-     .99999[9] can't be rounded in place, so add 
-     .000005   to it giving:
-     1.000004   we notice that the result is > 1 so add to exp and
-     divide by 10
-     .100004
-     */
-
-  in->original_value = in->value = in->original_value + rounder;
-  normalize(in->original_value , in);
-  return 1; 
-
-  
-}
-
-
-
-void
-_DEFUN(_cvte,(in),
-       register  cvt_info_type *in)
-{
-  int buffer_idx  =0;
-  int digit = 0;
-  
-  int after_decimal =0;
-
-  in->buffer[buffer_idx++] = nextdigit(&(in->value));
-  digit++;
-  in->dot_idx = buffer_idx;
-
-  
-  switch (in->dot) 
-  {
-  case dot_never:
-    break;
-  case dot_sometimes:
-    if (in->decimal_places 
-	&& digit < in->max_digits) 
-    {
-      in->buffer[buffer_idx++] = '.';
-    }
-    break;
-  case dot_always: 
-    in->buffer[buffer_idx++] = '.';    
-  }
-
-  
-  while (buffer_idx < in->buffer_size
-	 && after_decimal < in->decimal_places
-	 && digit < in->max_digits)
-  {
-    in->buffer[buffer_idx] = nextdigit(&(in->value));
-    after_decimal++;
-    buffer_idx++;
-    digit++;
-    
-  }
-
-  if (round(in,
-	    in->buffer,
-	    in->buffer+buffer_idx,
-	    nextdigit(&(in->value)))) 
-  {
-    _cvte(in);
-  }
-  else 
-  {
-    in->buffer[buffer_idx++] = in->type;			
-    in->buffer[buffer_idx++] = in->abs_exp_sign;
-
-    if (in->abs_exp >= 100) 
-    {
-      in->buffer[buffer_idx++] = lcset[in->abs_exp / 100];
-      in->abs_exp %= 100;
-    }
-    in->buffer[buffer_idx++] = lcset[in->abs_exp / 10];
-    in->buffer[buffer_idx++] = lcset[in->abs_exp % 10];
-  }
-  
-  in->buffer[buffer_idx++] = 0;
-}
-
-
-
-
-/* Produce NNNN.FFFF */
-void
-_DEFUN(_cvtf,(in),
-       cvt_info_type *in)
-{
-  
-  int buffer_idx = 0;		/* Current char being output */
-  int after_decimal = 0;
-  int digit =0;
-
-  
-  in->dot_idx = in->exp + 1;
-  
-  /* Two sorts of number, NNN.FFF and 0.0000...FFFF */
-
-
-  /* Print all the digits up to the decimal point */
-  
-  while (buffer_idx <= in->exp
-	 && digit < in->max_digits
-	 && buffer_idx < in->buffer_size)
-  {
-    in->buffer[buffer_idx]  = nextdigit(&(in->value));
-    buffer_idx++;
-    digit ++;
-  }
-
-
-  /* And the decimal point if we should */
-  if (buffer_idx < in->buffer_size) 
-  {
-    
-    switch (in->dot) 
-    {
-    case dot_never:
-      break;
-    case dot_sometimes:
-      /* Only print a dot if following chars */
-      if (in->decimal_places
-	  && digit < in->max_digits )
-      {
-       in->buffer[buffer_idx++] = '.';     
-     }
-      
-      break;
-    case dot_always:
-      in->buffer[buffer_idx++] = '.';
-    }
-  
-    after_decimal = 0;
-
-    /* And the digits following the point if necessary */
-
-    /* Only print the leading zeros if a dot was possible */
-    if (in->dot || in->exp>0) 
-    {
-     while (buffer_idx < in->buffer_size
-	    && (in->abs_exp_sign == '-' && digit < in->abs_exp - 1)
-	    && (after_decimal < in->decimal_places)
-	    && (digit < in->max_digits))
-     {
-       in->buffer[buffer_idx] = '0';
-       buffer_idx++;
-       digit++;
-       after_decimal++;
-     }
-   }
-    
-    while (buffer_idx < in->buffer_size
-	   && after_decimal < in->decimal_places
-	   && digit < in->max_digits)
-    {
-      in->buffer[buffer_idx]  = nextdigit(&(in->value));
-      buffer_idx++;
-      digit++;
-      after_decimal++;
-    }
-  }
-
-  in->null_idx = buffer_idx;  
-  in->buffer[buffer_idx] = 0;
-  if (round(in, in->buffer, in->buffer+buffer_idx,
-	    nextdigit(&(in->value)))) 
-  {
-      _cvtf(in);
-  }
-  
-
-
-  
-}
-
-
-
-char *
-_DEFUN(_dcvt,(buffer, invalue, precision, width, type, dot),
-       char *buffer _AND
-       double invalue _AND
-       int precision _AND
-       int width _AND
-       char type _AND
-       int dot)
-{
-  cvt_info_type in;
-
-
-
-  in.buffer = buffer;
-  in.buffer_size = 512;
-
-  if (!finite(invalue))
-  {
-    return print_nan(buffer, invalue, precision);
-  }    
-
-
-  normalize(invalue, &in);
-    
-  in.type = type;
-  in.dot = dot? dot_always: dot_sometimes;
-
-  switch (type)
-  {
-  
-  case 'g':
-  case 'G':
-    /* When formatting a g, the precision refers to the number of
-       char positions *total*, this leads to various off by ones */	
-  {
-    /* A precision of 0 means 1 */
-    if (precision == 0)
-     precision = 1;
-      
-    /* A g turns into an e if there are more digits than the
-       precision, or it's smaller than e-4 */
-    if (in.exp >= precision || in.exp < -4) 
-    {
-      in.type = (type == 'g' ? 'e' : 'E');
-      in.decimal_places = _MAX_CHARS;
-      in.max_digits = precision;
-      in.print_trailing_zeros = 1;
-      _cvte(&in);
-    }
-    else 
-    {
-      /* G means total number of chars to print */
-      in.decimal_places = _MAX_CHARS;
-      in.max_digits = precision;
-      in.type = (type == 'g' ? 'f' : 'F');
-      in.print_trailing_zeros = 0;
-      _cvtf(&in);
-
-   if (!dot) {
-       /* trim trailing zeros */
-       int j = in.null_idx -1;
-       while (j > 0 && in.buffer[j] == '0') 
-       {
-	 in.buffer[j] = 0;
-	 j--;
-       }
-       /* Stamp on a . if not followed by zeros */
-       if (j > 0 && buffer[j] == '.')
-	in.buffer[j] = 0;
-     }
-    }
-    
-      
-    break;
-  case 'f':
-  case 'F':
-    in.decimal_places= precision;
-    in.max_digits = _MAX_CHARS;
-      in.print_trailing_zeros = 1;    
-    _cvtf(&in);
-    break;
-  case 'e':
-  case 'E':
-      in.print_trailing_zeros = 1;
-    in.decimal_places = precision;
-    in.max_digits = _MAX_CHARS;
-    _cvte(&in);
-    break;
-  }
-
-  }
-
-
-  return buffer;
-}
-
-
-
-
-char *
-_DEFUN(fcvtbuf,(invalue,ndigit,decpt,sign, fcvt_buf),
-       double invalue _AND 
-       int ndigit _AND
-       int *decpt _AND
-       int *sign _AND
-       char *fcvt_buf)
-{
-  cvt_info_type in;
-  in.buffer = fcvt_buf;
-  in.buffer_size = 512;
-    
-  if (!finite(invalue))
-    {
-      return print_nan(fcvt_buf, invalue, ndigit);
-    }    
-
-  normalize(invalue, &in);
-
-  in.dot = dot_never;			/* Don't print a decimal point */
-  in.max_digits = _MAX_CHARS;
-  in.buffer_size = _MAX_CHARS;		/* Take as many as needed */
-  in.decimal_places = ndigit;
-  _cvtf(&in);
-  *decpt = in.dot_idx;
-  *sign = in.value_neg;
-  return in.buffer;
-}
-
-
-char *
-_DEFUN(ecvtbuf,(invalue,ndigit,decpt,sign, fcvt_buf),
-       double invalue _AND 
-       int ndigit _AND
-       int *decpt _AND
-       int *sign _AND
-       char *fcvt_buf)
-{
-  cvt_info_type in;
-  in.buffer = fcvt_buf;
-    
-  if (!finite(invalue))
-    {
-      return print_nan(fcvt_buf, invalue, ndigit);
-    }    
-
-  normalize(invalue, &in);
-
-
-  in.dot = dot_never;			/* Don't print a decimal point */
-/* We can work out how many digits go after the decimal point */
-
-  in.buffer_size =_MAX_CHARS;
-  in.decimal_places = _MAX_CHARS;
-  in.max_digits = ndigit;		/* Take as many as told */
-  _cvtf(&in);
-  *decpt = in.dot_idx;
-  *sign = in.value_neg;
-  return in.buffer;
-}
-
-
-
-char *
-_DEFUN(gcvt,(d,ndigit,buf),
-   double d _AND
-   int ndigit _AND
-   char *buf)
-{
-  return _dcvt(buf, d, ndigit, 0, 'g', 1);
-}
diff --git a/newlib/libm/test/dvec.c b/newlib/libm/test/dvec.c
deleted file mode 100644
index 198faa183..000000000
--- a/newlib/libm/test/dvec.c
+++ /dev/null
@@ -1,602 +0,0 @@
-#include "test.h"
-
-ddouble_type ddoubles[] = {
-__LINE__, 7.411456790099004e+08,"7411",4,9,0,"7411456790099",4,9,0,"7.411e+08",4,
-
-__LINE__, 6.779433073319225e-23,"6779433",7,-22,0,"6779433",7,-22,0,"6.779433e-23",7,
-
-__LINE__, 5.888272965262503e-03,"5888273",7,-2,0,"5888273",7,-2,0,".0058883",7,
-
-__LINE__, 1.705972712393192e-26,"17059727",8,-25,0,"17059727",8,-25,0,"1.7059727e-26",8,
-
-__LINE__, 5.790100803298969e-15,"6",1,-14,0,"6",1,-14,0,"6e-15",1,
-
-__LINE__, 7.563575126808102e-08,"7564",4,-7,0,"7564",4,-7,0,"7.564e-08",4,
-
-__LINE__, 2.065340498087056e+25,"206534",6,26,0,"20653404980870559981553924444597",6,26,0,"2.06534e+25",6,
-
-__LINE__, 1.047038124260123e+02,"1",1,3,0,"1047",1,3,0,"1e+02",1,
-
-__LINE__, 4.970783404568945e+28,"497",3,29,0,"49707834045689445190419064601883",3,29,0,"4.97e+28",3,
-
-__LINE__, 6.188542454563260e+02,"6",1,3,0,"6189",1,3,0,"6e+02",1,
-
-__LINE__, 1.913780290320816e+17,"191",3,18,0,"191378029032081631300",3,18,0,"1.91e+17",3,
-
-__LINE__, 6.911970810510094e-03,"691197",6,-2,0,"691197",6,-2,0,".006912",6,
-
-__LINE__, 6.530901390373796e-19,"7",1,-18,0,"7",1,-18,0,"7e-19",1,
-
-__LINE__, 1.688357491215602e+02,"168836",6,3,0,"168835749",6,3,0,"168.836",6,
-
-__LINE__, 1.347202777558724e-28,"13472028",8,-27,0,"13472028",8,-27,0,"1.3472028e-28",8,
-
-__LINE__, 4.198600486581023e+23,"42",2,24,0,"41986004865810233610545765",2,24,0,"4.2e+23",2,
-
-__LINE__, 6.626748168931517e-22,"66",2,-21,0,"66",2,-21,0,"6.6e-22",2,
-
-__LINE__, 8.271145287633235e+21,"82711",5,22,0,"827114528763323519910954928",5,22,0,"8.2711e+21",5,
-
-__LINE__, 2.569163640433771e+25,"3",1,26,0,"256916364043377054571237750",1,26,0,"3e+25",1,
-
-__LINE__, 7.764533336462913e-13,"776",3,-12,0,"776",3,-12,0,"7.76e-13",3,
-
-__LINE__, 4.619473758301567e-22,"46195",5,-21,0,"46195",5,-21,0,"4.6195e-22",5,
-
-__LINE__, 2.067935943396911e-13,"20679359",8,-12,0,"20679359",8,-12,0,"2.0679359e-13",8,
-
-__LINE__, 1.011355042357299e+02,"1011355",7,3,0,"1011355042",7,3,0,"101.1355",7,
-
-__LINE__, 4.814049311025340e+28,"5",1,29,0,"481404931102533950593169720378",1,29,0,"5e+28",1,
-
-__LINE__, 1.337365076329700e-30,"1337365",7,-29,0,"1337365",7,-29,0,"1.337365e-30",7,
-
-__LINE__, 9.501916506313627e-25,"950",3,-24,0,"950",3,-24,0,"9.50e-25",3,
-
-__LINE__, 1.529207539606606e-03,"15292",5,-2,0,"15292",5,-2,0,".00153",5,
-
-__LINE__, 4.077501222009158e+26,"408",3,27,0,"407750122200915754433481197339",3,27,0,"4.08e+26",3,
-
-__LINE__, 8.713312243134940e+00,"87133",5,1,0,"871331",5,1,0,"8.7133",5,
-
-__LINE__, 9.958770493219248e+29,"99587705",8,30,0,"99587704932192480100638931617140769958",8,30,0,"9.9587705e+29",8,
-
-__LINE__, 3.906559442060730e+27,"391",3,28,0,"3906559442060730447110472596250",3,28,0,"3.91e+27",3,
-
-__LINE__, 4.596864377904587e+09,"45968644",8,10,0,"459686437790458680",8,10,0,"4.5968644e+09",8,
-
-__LINE__, 1.011374744602721e+09,"10113747",8,10,0,"101137474460272125",8,10,0,"1.0113747e+09",8,
-
-__LINE__, 7.368531155948668e-29,"736853",6,-28,0,"736853",6,-28,0,"7.36853e-29",6,
-
-__LINE__, 9.501263936830290e-30,"9501264",7,-29,0,"9501264",7,-29,0,"9.501264e-30",7,
-
-__LINE__, 1.022516585955060e-21,"10",2,-20,0,"10",2,-20,0,"1.0e-21",2,
-
-__LINE__, 1.749461134391626e+03,"1749461",7,4,0,"17494611344",7,4,0,"1749.461",7,
-
-__LINE__, 1.597416186584641e+25,"159742",6,26,0,"15974161865846405738977864530170",6,26,0,"1.59742e+25",6,
-
-__LINE__, 1.191930545842576e-02,"1",1,-1,0,"1",1,-1,0,"",1,
-
-__LINE__, 4.401707995092183e-10,"440",3,-9,0,"440",3,-9,0,"4.40e-10",3,
-
-__LINE__, 5.842911524915387e-20,"5842912",7,-19,0,"5842912",7,-19,0,"5.842912e-20",7,
-
-__LINE__, 4.763038868476586e-17,"5",1,-16,0,"5",1,-16,0,"5e-17",1,
-
-__LINE__, 2.711250050689824e+04,"27112501",8,5,0,"2711250050690",8,5,0,"27112.501",8,
-
-__LINE__, 1.586825853752952e-28,"2",1,-27,0,"2",1,-27,0,"2e-28",1,
-
-__LINE__, 2.692606047104273e+11,"269261",6,12,0,"269260604710427298",6,12,0,"2.69261e+11",6,
-
-__LINE__, 3.179150601523438e+07,"3",1,8,0,"31791506",1,8,0,"3e+07",1,
-
-__LINE__, 2.504660553392644e+28,"2504661",7,29,0,"250466055339264359602680087846238166",7,29,0,"2.504661e+28",7,
-
-__LINE__, 2.337051102431064e+03,"2",1,4,0,"23371",1,4,0,"2e+03",1,
-
-__LINE__, 1.178118953346745e-26,"117812",6,-25,0,"117812",6,-25,0,"1.17812e-26",6,
-
-__LINE__, 3.686404114505492e-28,"36864041",8,-27,0,"36864041",8,-27,0,"3.6864041e-28",8,
-
-__LINE__, 5.762313620432176e+15,"5762314",7,16,0,"57623136204321756537183",7,16,0,"5.762314e+15",7,
-
-__LINE__, 4.452493864611241e-14,"44525",5,-13,0,"44525",5,-13,0,"4.4525e-14",5,
-
-__LINE__, 3.389385718740431e-19,"33893857",8,-18,0,"33893857",8,-18,0,"3.3893857e-19",8,
-
-__LINE__, 2.391576379695071e-10,"239",3,-9,0,"239",3,-9,0,"2.39e-10",3,
-
-__LINE__, 4.775469136289389e+28,"477547",6,29,0,"47754691362893888495477767719421536",6,29,0,"4.77547e+28",6,
-
-__LINE__, 1.880103319851404e-22,"18801033",8,-21,0,"18801033",8,-21,0,"1.8801033e-22",8,
-
-__LINE__, 3.623855580649127e-15,"36239",5,-14,0,"36239",5,-14,0,"3.6239e-15",5,
-
-__LINE__, 1.632057742810541e-14,"2",1,-13,0,"2",1,-13,0,"2e-14",1,
-
-__LINE__, 6.692624092583789e-22,"7",1,-21,0,"7",1,-21,0,"7e-22",1,
-
-__LINE__, 1.252002726173413e-16,"1252",4,-15,0,"1252",4,-15,0,"1.252e-16",4,
-
-__LINE__, 1.462408181475922e+10,"1462",4,11,0,"146240818147592",4,11,0,"1.462e+10",4,
-
-__LINE__, 4.005562902861667e+12,"4006",4,13,0,"40055629028616666",4,13,0,"4.006e+12",4,
-
-__LINE__, 1.131067062565773e-17,"1",1,-16,0,"1",1,-16,0,"1e-17",1,
-
-__LINE__, 2.397292973376075e+16,"2397293",7,17,0,"239729297337607505369306",7,17,0,"2.397293e+16",7,
-
-__LINE__, 1.247021255449452e+05,"124702",6,6,0,"124702125545",6,6,0,"124702",6,
-
-__LINE__, 3.222697929297968e-16,"32226979",8,-15,0,"32226979",8,-15,0,"3.2226979e-16",8,
-
-__LINE__, 5.930401483195766e-22,"59304015",8,-21,0,"59304015",8,-21,0,"5.9304015e-22",8,
-
-__LINE__, 1.741790451299310e-05,"2",1,-4,0,"2",1,-4,0,"2e-05",1,
-
-
-__LINE__, 5.560486576144616e-04,"56",2,-3,0,"56",2,-3,0,"",2,
-
-__LINE__, 3.721569132002345e+12,"4",1,13,0,"37215691320023",1,13,0,"4e+12",1,
-
-__LINE__, 5.602270485868007e+10,"56",2,11,0,"5602270485868",2,11,0,"5.6e+10",2,
-
-__LINE__, 1.872554953737922e-13,"187",3,-12,0,"187",3,-12,0,"1.87e-13",3,
-
-__LINE__, 3.078997528596941e+07,"308",3,8,0,"30789975286",3,8,0,"3.08e+07",3,
-
-__LINE__, 1.637490643914118e-06,"2",1,-5,0,"2",1,-5,0,"2e-06",1,
-
-__LINE__, 8.179181640418333e+24,"818",3,25,0,"8179181640418333287811947230",3,25,0,"8.18e+24",3,
-
-__LINE__, 6.171369234524714e-28,"6171",4,-27,0,"6171",4,-27,0,"6.171e-28",4,
-
-__LINE__, 1.791138795467072e+14,"18",2,15,0,"17911387954670723",2,15,0,"1.8e+14",2,
-
-__LINE__, 9.907740945357109e+25,"9907741",7,26,0,"990774094535710858622223895508796",7,26,0,"9.907741e+25",7,
-
-__LINE__, 2.530848135710619e-14,"253085",6,-13,0,"253085",6,-13,0,"2.53085e-14",6,
-
-__LINE__, 1.619815697846305e-25,"16198157",8,-24,0,"16198157",8,-24,0,"1.6198157e-25",8,
-
-__LINE__, 1.658806111939662e+06,"17",2,7,0,"165880611",2,7,0,"1.7e+06",2,
-
-__LINE__, 1.520841097485083e+25,"2",1,26,0,"152084109748508282677903480",1,26,0,"2e+25",1,
-
-__LINE__, 1.305213586757638e-18,"1305",4,-17,0,"1305",4,-17,0,"1.305e-18",4,
-
-__LINE__, 7.052058348992362e-12,"70520583",8,-11,0,"70520583",8,-11,0,"7.0520583e-12",8,
-
-__LINE__, 7.819308213692752e+20,"781931",6,21,0,"781930821369275186327740812",6,21,0,"7.81931e+20",6,
-
-__LINE__, 3.457215738335750e-13,"345722",6,-12,0,"345722",6,-12,0,"3.45722e-13",6,
-
-__LINE__, 5.673283287913788e+07,"56732833",8,8,0,"5673283287913788",8,8,0,"56732833",8,
-
-__LINE__, 1.471857261085004e+23,"1472",4,24,0,"1471857261085003809597537838",4,24,0,"1.472e+23",4,
-
-__LINE__, 1.793947117071970e+22,"17939471",8,23,0,"1793947117071969632462469235179",8,23,0,"1.7939471e+22",8,
-
-__LINE__, 5.121254629351260e-11,"51213",5,-10,0,"51213",5,-10,0,"5.1213e-11",5,
-
-__LINE__, 4.390732882355057e+16,"439073",6,17,0,"43907328823550573204670",6,17,0,"4.39073e+16",6,
-
-__LINE__, 2.427335872475672e+27,"24273359",8,28,0,"242733587247567239586487630731426179",8,28,0,"2.4273359e+27",8,
-
-__LINE__, 6.328085758887609e+19,"6328086",7,20,0,"632808575888760937999677481",7,20,0,"6.328086e+19",7,
-
-__LINE__, 7.399809184791178e+15,"7400",4,16,0,"73998091847911782182",4,16,0,"7.400e+15",4,
-
-__LINE__, 1.431701330887928e-11,"143",3,-10,0,"143",3,-10,0,"1.43e-11",3,
-
-__LINE__, 2.059594182326570e+24,"206",3,25,0,"2059594182326569988816800105",3,25,0,"2.06e+24",3,
-
-__LINE__, 1.754194250078728e-25,"175",3,-24,0,"175",3,-24,0,"1.75e-25",3,
-
-__LINE__, 4.941256641422608e-27,"494",3,-26,0,"494",3,-26,0,"4.94e-27",3,
-
-__LINE__, 2.206058544089213e-20,"22060585",8,-19,0,"22060585",8,-19,0,"2.2060585e-20",8,
-
-__LINE__, 6.994849795137307e+10,"699485",6,11,0,"69948497951373065",6,11,0,"6.99485e+10",6,
-
-__LINE__, 3.152798180026982e+28,"3153",4,29,0,"315279818002698153378560164128430",4,29,0,"3.153e+28",4,
-
-
-__LINE__, 1.348325903318616e-24,"1348326",7,-23,0,"1348326",7,-23,0,"1.348326e-24",7,
-
-__LINE__, 2.113465893194608e-15,"21134659",8,-14,0,"21134659",8,-14,0,"2.1134659e-15",8,
-
-__LINE__, 4.073170124707854e+02,"407",3,3,0,"407317",3,3,0,"407",3,
-
-__LINE__, 2.181347299147143e-17,"218135",6,-16,0,"218135",6,-16,0,"2.18135e-17",6,
-
-__LINE__, 2.103271966376922e+03,"21",2,4,0,"210327",2,4,0,"2.1e+03",2,
-
-__LINE__, 2.286252208932191e-30,"229",3,-29,0,"229",3,-29,0,"2.29e-30",3,
-
-__LINE__, 5.624350974502655e+25,"6",1,26,0,"562435097450265519825052252",1,26,0,"6e+25",1,
-
-__LINE__, 4.453486178405307e+05,"4453",4,6,0,"4453486178",4,6,0,"4.453e+05",4,
-
-__LINE__, 1.555010610051608e+13,"156",3,14,0,"15550106100516081",3,14,0,"1.56e+13",3,
-
-__LINE__, 7.719959471762408e-11,"8",1,-10,0,"8",1,-10,0,"8e-11",1,
-
-__LINE__, 6.649313805526527e+04,"6649314",7,5,0,"664931380553",7,5,0,"66493.14",7,
-
-__LINE__, 2.736862165988477e-29,"2737",4,-28,0,"2737",4,-28,0,"2.737e-29",4,
-
-__LINE__, 8.961141449916591e+05,"8961141",7,6,0,"8961141449917",7,6,0,"896114.1",7,
-
-__LINE__, 3.743832253349299e+03,"37438323",8,4,0,"374383225335",8,4,0,"3743.8323",8,
-
-__LINE__, 4.616542199119112e-19,"5",1,-18,0,"5",1,-18,0,"5e-19",1,
-
-__LINE__, 2.141990110663772e-10,"214",3,-9,0,"214",3,-9,0,"2.14e-10",3,
-
-__LINE__, 4.087808591469674e-14,"40878086",8,-13,0,"40878086",8,-13,0,"4.0878086e-14",8,
-
-
-__LINE__, 1.406420622355064e+19,"140642",6,20,0,"14064206223550643315434172",6,20,0,"1.40642e+19",6,
-
-__LINE__, 3.962213921914215e-30,"39622",5,-29,0,"39622",5,-29,0,"3.9622e-30",5,
-
-__LINE__, 1.851236839271498e-12,"19",2,-11,0,"19",2,-11,0,"1.9e-12",2,
-
-__LINE__, 1.752891467132837e-16,"1753",4,-15,0,"1753",4,-15,0,"1.753e-16",4,
-
-__LINE__, 1.313285975240631e+10,"1313286",7,11,0,"131328597524063095",7,11,0,"1.313286e+10",7,
-
-__LINE__, 4.797451776197904e-24,"480",3,-23,0,"480",3,-23,0,"4.80e-24",3,
-
-__LINE__, 5.632348260968011e+03,"6",1,4,0,"56323",1,4,0,"6e+03",1,
-
-__LINE__, 1.282189526481336e+17,"1282",4,18,0,"1282189526481336336872",4,18,0,"1.282e+17",4,
-
-__LINE__, 9.821689835700839e-26,"98217",5,-25,0,"98217",5,-25,0,"9.8217e-26",5,
-
-__LINE__, 3.380291727425090e-10,"3380",4,-9,0,"3380",4,-9,0,"3.380e-10",4,
-
-__LINE__, 4.869764742219911e-01,"4870",4,0,0,"4870",4,0,0,".487",4,
-
-__LINE__, 2.099154543729566e+23,"20992",5,24,0,"20991545437295662246413030516",5,24,0,"2.0992e+23",5,
-
-__LINE__, 1.768676806117752e+04,"17686768",8,5,0,"1768676806118",8,5,0,"17686.768",8,
-
-__LINE__, 4.303784934223482e-13,"4",1,-12,0,"4",1,-12,0,"4e-13",1,
-
-__LINE__, 6.523728950282939e+15,"65237290",8,16,0,"652372895028293875441250",8,16,0,"6.5237290e+15",8,
-
-__LINE__, 7.532898256664122e+08,"8",1,9,0,"7532898257",1,9,0,"8e+08",1,
-
-__LINE__, 1.442346036443942e+29,"1",1,30,0,"1442346036443941947879920917330",1,30,0,"1e+29",1,
-
-__LINE__, 2.594386109572275e+04,"259",3,5,0,"25943861",3,5,0,"2.59e+04",3,
-
-__LINE__, 6.254936126036594e+01,"6",1,2,0,"625",1,2,0,"6e+01",1,
-
-__LINE__, 1.009888981861756e+09,"100989",6,10,0,"1009888981861756",6,10,0,"1.00989e+09",6,
-
-__LINE__, 2.163578851988448e-16,"21635789",8,-15,0,"21635789",8,-15,0,"2.1635789e-16",8,
-
-__LINE__, 2.241242805107749e+14,"224124",6,15,0,"224124280510774864794",6,15,0,"2.24124e+14",6,
-
-__LINE__, 3.686520132725987e+17,"368652",6,18,0,"368652013272598733095720",6,18,0,"3.68652e+17",6,
-
-__LINE__, 1.249196467299682e-10,"1249",4,-9,0,"1249",4,-9,0,"1.249e-10",4,
-
-__LINE__, 2.235966135657711e-16,"224",3,-15,0,"224",3,-15,0,"2.24e-16",3,
-
-__LINE__, 7.281023867864680e+03,"7281",4,4,0,"72810239",4,4,0,"7281",4,
-
-__LINE__, 9.495208466038456e-04,"9495208",7,-3,0,"9495208",7,-3,0,".0009495",7,
-
-__LINE__, 1.909521167837320e+18,"190952",6,19,0,"1909521167837320376747812",6,19,0,"1.90952e+18",6,
-
-__LINE__, 1.595163045878173e-28,"16",2,-27,0,"16",2,-27,0,"1.6e-28",2,
-
-__LINE__, 8.333021482130567e+12,"83330215",8,13,0,"833302148213056703696",8,13,0,"8.3330215e+12",8,
-
-__LINE__, 2.661576028772926e-12,"266",3,-11,0,"266",3,-11,0,"2.66e-12",3,
-
-__LINE__, 3.333613056158649e-24,"333",3,-23,0,"333",3,-23,0,"3.33e-24",3,
-
-__LINE__, 6.968307583705560e+11,"696831",6,12,0,"696830758370555969",6,12,0,"6.96831e+11",6,
-
-__LINE__, 7.112095848565475e-19,"711",3,-18,0,"711",3,-18,0,"7.11e-19",3,
-
-__LINE__, 5.115369447807078e+21,"5115",4,22,0,"51153694478070779183553896",4,22,0,"5.115e+21",4,
-
-__LINE__, 1.127652589560061e+16,"112765",6,17,0,"11276525895600610915892",6,17,0,"1.12765e+16",6,
-
-__LINE__, 6.777084460845612e-18,"6777",4,-17,0,"6777",4,-17,0,"6.777e-18",4,
-
-__LINE__, 7.969183405862033e-02,"7969183",7,-1,0,"7969183",7,-1,0,".0796918",7,
-
-__LINE__, 4.497389494902805e-27,"449739",6,-26,0,"449739",6,-26,0,"4.49739e-27",6,
-
-__LINE__, 1.174283761330826e+27,"1174284",7,28,0,"11742837613308263478018034220440313",7,28,0,"1.174284e+27",7,
-
-__LINE__, 1.180289038670172e+06,"11803",5,7,0,"118028903867",5,7,0,"1.1803e+06",5,
-
-__LINE__, 1.373844082711513e+16,"137",3,17,0,"13738440827115125931",3,17,0,"1.37e+16",3,
-
-__LINE__, 1.080822334120836e+12,"1080822",7,13,0,"10808223341208362811",7,13,0,"1.080822e+12",7,
-
-__LINE__, 3.758397902350635e+20,"37584",5,21,0,"37583979023506346450744786",5,21,0,"3.7584e+20",5,
-
-__LINE__, 4.412285493952947e-11,"44",2,-10,0,"44",2,-10,0,"4.4e-11",2,
-
-__LINE__, 6.565101733527507e+17,"657",3,18,0,"656510173352750658893",3,18,0,"6.57e+17",3,
-
-__LINE__, 5.723516940272932e+08,"57",2,9,0,"57235169403",2,9,0,"5.7e+08",2,
-
-__LINE__, 5.330525090324728e-11,"53",2,-10,0,"53",2,-10,0,"5.3e-11",2,
-
-__LINE__, 6.915504868363691e+29,"691550",6,30,0,"691550486836369060483775683678686619",6,30,0,"6.91550e+29",6,
-
-__LINE__, 3.172898814737255e-01,"317290",6,0,0,"317290",6,0,0,".31729",6,
-
-__LINE__, 2.967012281733283e+11,"297",3,12,0,"296701228173328",3,12,0,"2.97e+11",3,
-
-__LINE__, 8.589210867009845e-29,"8589",4,-28,0,"8589",4,-28,0,"8.589e-29",4,
-
-__LINE__, 3.624557765318715e-26,"362",3,-25,0,"362",3,-25,0,"3.62e-26",3,
-
-__LINE__, 1.867754272422402e+27,"2",1,28,0,"18677542724224018400036584353",1,28,0,"2e+27",1,
-
-__LINE__, 5.150243379639871e-22,"5",1,-21,0,"5",1,-21,0,"5e-22",1,
-
-__LINE__, 1.190174047262241e+06,"119017",6,7,0,"1190174047262",6,7,0,"1.19017e+06",6,
-
-__LINE__, 5.502639082882342e-29,"550264",6,-28,0,"550264",6,-28,0,"5.50264e-29",6,
-
-__LINE__, 7.609168279063695e-08,"76091683",8,-7,0,"76091683",8,-7,0,"7.6091683e-08",8,
-
-__LINE__, 5.487757715406920e-12,"548776",6,-11,0,"548776",6,-11,0,"5.48776e-12",6,
-
-__LINE__, 8.221233434744608e+15,"822123",6,16,0,"8221233434744608103983",6,16,0,"8.22123e+15",6,
-
-__LINE__, 1.679041208804822e+22,"17",2,23,0,"1679041208804822105093990",2,23,0,"1.7e+22",2,
-
-__LINE__, 3.674074760085828e+11,"3674075",7,12,0,"3674074760085828117",7,12,0,"3.674075e+11",7,
-
-__LINE__, 9.707698305552812e+26,"9707698",7,27,0,"9707698305552812101382187393028289",7,27,0,"9.707698e+26",7,
-
-__LINE__, 3.290460821927777e+07,"329046",6,8,0,"32904608219278",6,8,0,"3.29046e+07",6,
-
-__LINE__, 1.921280148435649e-17,"1921280",7,-16,0,"1921280",7,-16,0,"1.921280e-17",7,
-
-__LINE__, 7.262738303068721e+09,"726274",6,10,0,"7262738303068721",6,10,0,"7.26274e+09",6,
-
-__LINE__, 4.917897575589579e-25,"4917898",7,-24,0,"4917898",7,-24,0,"4.917898e-25",7,
-
-__LINE__, 1.848626498191354e+08,"1849",4,9,0,"1848626498191",4,9,0,"1.849e+08",4,
-
-__LINE__, 2.820784720947056e+26,"2820785",7,27,0,"2820784720947055568274208781076595",7,27,0,"2.820785e+26",7,
-
-__LINE__, 2.127470079770766e+28,"21274701",8,29,0,"2127470079770765742921412311261519790",8,29,0,"2.1274701e+28",8,
-
-__LINE__, 6.873538587870355e+25,"6874",4,26,0,"687353858787035498778550390853",4,26,0,"6.874e+25",4,
-
-__LINE__, 6.454410097043550e-24,"64544101",8,-23,0,"64544101",8,-23,0,"6.4544101e-24",8,
-
-__LINE__, 2.213118618919111e-26,"22131",5,-25,0,"22131",5,-25,0,"2.2131e-26",5,
-
-__LINE__, 8.742226151396711e+18,"9",1,19,0,"87422261513967107760",1,19,0,"9e+18",1,
-
-__LINE__, 3.558503745388271e+20,"356",3,21,0,"355850374538827063375379",3,21,0,"3.56e+20",3,
-
-__LINE__, 1.553371837875792e-25,"15533718",8,-24,0,"15533718",8,-24,0,"1.5533718e-25",8,
-
-__LINE__, 2.939271130182748e+07,"3",1,8,0,"293927113",1,8,0,"3e+07",1,
-
-__LINE__, 6.541662345466598e+16,"6542",4,17,0,"654166234546659808302",4,17,0,"6.542e+16",4,
-
-__LINE__, 2.248170096684619e-07,"225",3,-6,0,"225",3,-6,0,"2.25e-07",3,
-
-__LINE__, 2.756161281996178e+00,"28",2,1,0,"276",2,1,0,"2.8",2,
-
-__LINE__, 5.239468978174450e+03,"5",1,4,0,"52395",1,4,0,"5e+03",1,
-
-__LINE__, 4.338762938029571e-17,"433876",6,-16,0,"433876",6,-16,0,"4.33876e-17",6,
-
-__LINE__, 3.017196887951920e+06,"3",1,7,0,"30171969",1,7,0,"3e+06",1,
-
-__LINE__, 3.150206780920639e-18,"32",2,-17,0,"32",2,-17,0,"3.2e-18",2,
-
-__LINE__, 7.446444859285637e+20,"74464449",8,21,0,"74464448592856369302239727404",8,21,0,"7.4464449e+20",8,
-
-__LINE__, 5.738871302601839e+07,"5738871",7,8,0,"573887130260184",7,8,0,"5.738871e+07",7,
-
-__LINE__, 1.237491441221398e-03,"12374914",8,-2,0,"12374914",8,-2,0,".00123749",8,
-
-__LINE__, 7.324627764516713e+09,"73246",5,10,0,"732462776451671",5,10,0,"7.3246e+09",5,
-
-__LINE__, 3.259418579308160e+15,"3",1,16,0,"32594185793081598",1,16,0,"3e+15",1,
-
-__LINE__, 1.405194834603686e-15,"1",1,-14,0,"1",1,-14,0,"1e-15",1,
-
-__LINE__, 3.011742184583622e-17,"301",3,-16,0,"301",3,-16,0,"3.01e-17",3,
-
-__LINE__, 1.106215706057235e-29,"1106216",7,-28,0,"1106216",7,-28,0,"1.106216e-29",7,
-
-__LINE__, 4.358471388308310e+16,"43585",5,17,0,"4358471388308309713011",5,17,0,"4.3585e+16",5,
-
-__LINE__, 2.072305531071263e-29,"2072",4,-28,0,"2072",4,-28,0,"2.072e-29",4,
-
-__LINE__, 1.986866126874383e-19,"19868661",8,-18,0,"19868661",8,-18,0,"1.9868661e-19",8,
-
-__LINE__, 1.428864728880793e-23,"14288647",8,-22,0,"14288647",8,-22,0,"1.4288647e-23",8,
-
-__LINE__, 5.262679202231463e+16,"5263",4,17,0,"526267920223146301595",4,17,0,"5.263e+16",4,
-
-__LINE__, 2.717198955673183e-15,"271720",6,-14,0,"271720",6,-14,0,"2.71720e-15",6,
-
-__LINE__, 5.150668549567997e-09,"515067",6,-8,0,"515067",6,-8,0,"5.15067e-09",6,
-
-__LINE__, 5.671830707040847e-22,"56718",5,-21,0,"56718",5,-21,0,"5.6718e-22",5,
-
-__LINE__, 1.032009065233582e-28,"1032",4,-27,0,"1032",4,-27,0,"1.032e-28",4,
-
-__LINE__, 3.256531418180773e+17,"32565",5,18,0,"32565314181807734073004",5,18,0,"3.2565e+17",5,
-
-__LINE__, 6.855618055697167e+13,"68556181",8,14,0,"6855618055697166646212",8,14,0,"6.8556181e+13",8,
-
-__LINE__, 1.838515126542337e-04,"183852",6,-3,0,"183852",6,-3,0,".000184",6,
-
-__LINE__, 3.269357648926951e+01,"326936",6,2,0,"32693576",6,2,0,"32.6936",6,
-
-__LINE__, 3.155127022134804e+00,"316",3,1,0,"3155",3,1,0,"3.16",3,
-
-__LINE__, 9.842427380306443e-11,"9842427",7,-10,0,"9842427",7,-10,0,"9.842427e-11",7,
-
-__LINE__, 1.170329127498228e-27,"117033",6,-26,0,"117033",6,-26,0,"1.17033e-27",6,
-
-__LINE__, 7.954489717411354e+25,"795449",6,26,0,"79544897174113540216922046965919",6,26,0,"7.95449e+25",6,
-
-__LINE__, 1.330137938788394e-21,"133014",6,-20,0,"133014",6,-20,0,"1.33014e-21",6,
-
-__LINE__, 1.263788120181220e+06,"13",2,7,0,"126378812",2,7,0,"1.3e+06",2,
-
-__LINE__, 1.017118108979511e+06,"10171181",8,7,0,"101711810897951",8,7,0,"1017118.1",8,
-
-__LINE__, 1.128387852183361e-22,"1128",4,-21,0,"1128",4,-21,0,"1.128e-22",4,
-
-__LINE__, 2.047687698869088e-07,"20477",5,-6,0,"20477",5,-6,0,"2.0477e-07",5,
-
-__LINE__, 9.216460471355292e+05,"92165",5,6,0,"92164604714",5,6,0,"9.2165e+05",5,
-
-__LINE__, 5.540246538793573e+07,"5540247",7,8,0,"554024653879357",7,8,0,"5.540247e+07",7,
-
-__LINE__, 6.986505945589122e-22,"6986506",7,-21,0,"6986506",7,-21,0,"6.986506e-22",7,
-
-__LINE__, 1.779386879779575e-18,"18",2,-17,0,"18",2,-17,0,"1.8e-18",2,
-
-__LINE__, 9.439044013853280e+08,"9439",4,9,0,"9439044013853",4,9,0,"9.439e+08",4,
-
-__LINE__, 1.981265125583486e+05,"2",1,6,0,"1981265",1,6,0,"2e+05",1,
-
-__LINE__, 5.674986230255942e+22,"6",1,23,0,"567498623025594195468102",1,23,0,"6e+22",1,
-
-__LINE__, 2.298864411716790e+15,"22989",5,16,0,"229886441171679001272",5,16,0,"2.2989e+15",5,
-
-__LINE__, 4.754726458107860e-26,"475473",6,-25,0,"475473",6,-25,0,"4.75473e-26",6,
-
-__LINE__, 7.998336968052068e-02,"80",2,-1,0,"80",2,-1,0,".08",2,
-
-__LINE__, 2.186697365330358e+25,"218670",6,26,0,"21866973653303576341500047419686",6,26,0,"2.18670e+25",6,
-
-__LINE__, 6.934807529104567e-22,"6935",4,-21,0,"6935",4,-21,0,"6.935e-22",4,
-
-__LINE__, 1.120569139248787e+18,"1120569",7,19,0,"11205691392487873159211631",7,19,0,"1.120569e+18",7,
-
-__LINE__, 1.579448259562240e+11,"1579448",7,12,0,"1579448259562239620",7,12,0,"1.579448e+11",7,
-
-__LINE__, 2.272794041158999e-21,"2272794",7,-20,0,"2272794",7,-20,0,"2.272794e-21",7,
-
-__LINE__, 1.627330067952862e-06,"1627330",7,-5,0,"1627330",7,-5,0,"1.627330e-06",7,
-
-__LINE__, 3.410001865714449e-30,"3410002",7,-29,0,"3410002",7,-29,0,"3.410002e-30",7,
-
-__LINE__, 5.061135631527160e+26,"506114",6,27,0,"506113563152715961734884331235662",6,27,0,"5.06114e+26",6,
-
-__LINE__, 1.500941743164653e+27,"1501",4,28,0,"15009417431646530083355628448771",4,28,0,"1.501e+27",4,
-
-__LINE__, 6.166170245590984e+24,"61661702",8,25,0,"616617024559098414471236537792720",8,25,0,"6.1661702e+24",8,
-
-__LINE__, 3.136978730888098e-24,"31",2,-23,0,"31",2,-23,0,"3.1e-24",2,
-
-__LINE__, 2.970061334090170e+21,"3",1,22,0,"29700613340901703907093",1,22,0,"3e+21",1,
-
-__LINE__, 3.291355984766073e-13,"32913560",8,-12,0,"32913560",8,-12,0,"3.2913560e-13",8,
-
-__LINE__, 9.303595796139161e+03,"93036",5,4,0,"93035958",5,4,0,"9303.6",5,
-
-__LINE__, 7.649624512400109e+09,"8",1,10,0,"76496245124",1,10,0,"8e+09",1,
-
-__LINE__, 1.390807673774886e-22,"13908",5,-21,0,"13908",5,-21,0,"1.3908e-22",5,
-
-__LINE__, 8.901090936921923e-21,"890",3,-20,0,"890",3,-20,0,"8.90e-21",3,
-
-__LINE__, 3.420609082386055e-04,"34206",5,-3,0,"34206",5,-3,0,".00034",5,
-
-__LINE__, 8.719476778541001e+18,"87",2,19,0,"871947677854100078321",2,19,0,"8.7e+18",2,
-
-__LINE__, 2.975167062429047e+07,"29751671",8,8,0,"2975167062429047",8,8,0,"29751671",8,
-
-__LINE__, 1.386895871501743e-02,"13868959",8,-1,0,"13868959",8,-1,0,".01386896",8,
-
-__LINE__, 1.249824679294188e-16,"12",2,-15,0,"12",2,-15,0,"1.2e-16",2,
-
-__LINE__, 8.835235425529023e-01,"88352354",8,0,0,"88352354",8,0,0,".88352354",8,
-
-__LINE__, 2.719226257905232e-01,"2719",4,0,0,"2719",4,0,0,".2719",4,
-
-__LINE__, 9.756572868832603e+17,"97565729",8,18,0,"97565728688326025519472751",8,18,0,"9.7565729e+17",8,
-
-__LINE__, 6.264826770146615e-01,"626",3,0,0,"626",3,0,0,".626",3,
-
-__LINE__, 2.972698423704301e-21,"3",1,-20,0,"3",1,-20,0,"3e-21",1,
-
-__LINE__, 2.176563709034982e-02,"22",2,-1,0,"22",2,-1,0,".02",2,
-
-__LINE__, 1.181023160092374e+11,"12",2,12,0,"11810231600924",2,12,0,"1.2e+11",2,
-
-__LINE__, 7.469767449800807e-04,"74697674",8,-3,0,"74697674",8,-3,0,".00074698",8,
-
-__LINE__, 1.457185871184082e+29,"1457186",7,30,0,"1457185871184081715767888454138301313",7,30,0,"1.457186e+29",7,
-
-__LINE__, 1.426297306275258e-19,"14263",5,-18,0,"14263",5,-18,0,"1.4263e-19",5,
-
-__LINE__, 2.457411275450009e+25,"24574",5,26,0,"2457411275450009036092069436563",5,26,0,"2.4574e+25",5,
-
-__LINE__, 8.249246277298404e-20,"82492",5,-19,0,"82492",5,-19,0,"8.2492e-20",5,
-
-__LINE__, 2.921055529607521e-08,"2921056",7,-7,0,"2921056",7,-7,0,"2.921056e-08",7,
-
-__LINE__, 4.976498203142557e-25,"50",2,-24,0,"50",2,-24,0,"5.0e-25",2,
-
-__LINE__, 2.483141865351692e-21,"25",2,-20,0,"25",2,-20,0,"2.5e-21",2,
-
-__LINE__, 1.027771450975839e+24,"10278",5,25,0,"102777145097583866295565258042",5,25,0,"1.0278e+24",5,
-
-__LINE__, 1.515030972674741e+01,"1515",4,2,0,"151503",4,2,0,"15.15",4,
-
-__LINE__, 5.248693720662853e+22,"5",1,23,0,"524869372066285322375734",1,23,0,"5e+22",1,
-
-__LINE__, 3.185373401105931e-01,"32",2,0,0,"32",2,0,0,".32",2,
-
-__LINE__, 1.024581294142808e-06,"10246",5,-5,0,"10246",5,-5,0,"1.0246e-06",5,
-
-__LINE__, 1.734965037632195e-07,"173",3,-6,0,"173",3,-6,0,"1.73e-07",3,
-
-__LINE__, 1.368662469019739e+03,"13686625",8,4,0,"136866246902",8,4,0,"1368.6625",8,
-
-__LINE__, 4.744768215108924e-02,"474477",6,-1,0,"474477",6,-1,0,".047448",6,
-
-__LINE__, 3.523947347400251e+10,"35",2,11,0,"3523947347400",2,11,0,"3.5e+10",2,
-
-__LINE__, 4.703989947348573e+08,"4704",4,9,0,"4703989947349",4,9,0,"4.704e+08",4,
-
-__LINE__, 3.334096615018971e+22,"333410",6,23,0,"33340966150189710326401382190",6,23,0,"3.33410e+22",6,
-
-__LINE__, 2.224344163719534e+19,"2224",4,20,0,"222434416371953380675563",4,20,0,"2.224e+19",4,
-
-__LINE__, 2.841077022740213e-09,"2841",4,-8,0,"2841",4,-8,0,"2.841e-09",4,
-
-__LINE__, 4.567747128685568e+04,"456775",6,5,0,"45677471287",6,5,0,"45677.5",6,
-
-
-__LINE__, 4.463721781600269e-03,"4",1,-2,0,"4",1,-2,0,"",1,
-
-__LINE__, 1.581538540826530e+16,"15815385",8,17,0,"1581538540826530336858013",8,17,0,"1.5815385e+16",8,
-
-__LINE__, 2.407978509096453e+21,"2",1,22,0,"24079785090964529459256",1,22,0,"2e+21",1,
-
-
-0,
-};
diff --git a/newlib/libm/test/erf_vec.c b/newlib/libm/test/erf_vec.c
deleted file mode 100644
index 893f9cc15..000000000
--- a/newlib/libm/test/erf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type erf_vec[] = {
-{64, 0,123,__LINE__, 0xbfed214a, 0xc7b2d068, 0xbff33333, 0x33333333},			/* -0.91031=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbfed0b20, 0x883a76ce, 0xbff30a3d, 0x70a3d70a},			/* -0.90760=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbfecf46d, 0x9e998652, 0xbff2e147, 0xae147ae1},			/* -0.90483=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xbfecdd2f, 0xf0d13464, 0xbff2b851, 0xeb851eb8},			/* -0.90200=f(-1.17000)*/
-{62, 0,123,__LINE__, 0xbfecc565, 0x666a6fc6, 0xbff28f5c, 0x28f5c28f},			/* -0.89909=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfecad0b, 0xe8d28e76, 0xbff26666, 0x66666666},			/* -0.89612=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbfec9421, 0x63b9c90c, 0xbff23d70, 0xa3d70a3d},			/* -0.89308=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbfec7aa3, 0xc57375b7, 0xbff2147a, 0xe147ae14},			/* -0.88997=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbfec6090, 0xff57f49a, 0xbff1eb85, 0x1eb851eb},			/* -0.88678=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfec45e7, 0x06283e10, 0xbff1c28f, 0x5c28f5c2},			/* -0.88353=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfec2aa3, 0xd27302bf, 0xbff19999, 0x99999999},			/* -0.88020=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfec0ec5, 0x60fb4c70, 0xbff170a3, 0xd70a3d70},			/* -0.87680=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfebf249, 0xb3208dbc, 0xbff147ae, 0x147ae147},			/* -0.87332=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfebd52e, 0xcf480de0, 0xbff11eb8, 0x51eb851e},			/* -0.86977=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfebb772, 0xc1479d22, 0xbff0f5c2, 0x8f5c28f5},			/* -0.86614=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfeb9913, 0x9ad17d5a, 0xbff0cccc, 0xcccccccc},			/* -0.86243=f(-1.05000)*/
-{63, 0,123,__LINE__, 0xbfeb7a0f, 0x73e16967, 0xbff0a3d7, 0x0a3d70a3},			/* -0.85864=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbfeb5a64, 0x6b2aa59b, 0xbff07ae1, 0x47ae147a},			/* -0.85478=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfeb3a10, 0xa687022c, 0xbff051eb, 0x851eb851},			/* -0.85083=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbfeb1912, 0x5366b827, 0xbff028f5, 0xc28f5c28},			/* -0.84681=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfeaf767, 0xa7410889, 0xbfefffff, 0xfffffffe},			/* -0.84270=f(-0.01000)*/
-{62, 0,123,__LINE__, 0xbfead50e, 0xe0058459, 0xbfefae14, 0x7ae147ac},			/* -0.83850=f(-0.99000)*/
-{59, 0,123,__LINE__, 0xbfeab206, 0x448de3f0, 0xbfef5c28, 0xf5c28f5a},			/* -0.83423=f(-0.98000)*/
-{61, 0,123,__LINE__, 0xbfea8e4c, 0x251052f3, 0xbfef0a3d, 0x70a3d708},			/* -0.82987=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfea69de, 0xdb9215cc, 0xbfeeb851, 0xeb851eb6},			/* -0.82542=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfea44bc, 0xcc5a6caf, 0xbfee6666, 0x66666664},			/* -0.82089=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfea1ee4, 0x666597d2, 0xbfee147a, 0xe147ae12},			/* -0.81627=f(-0.94000)*/
-{63, 0,123,__LINE__, 0xbfe9f854, 0x23d7dfaf, 0xbfedc28f, 0x5c28f5c0},			/* -0.81156=f(-0.93000)*/
-{62, 0,123,__LINE__, 0xbfe9d10a, 0x8a7083a6, 0xbfed70a3, 0xd70a3d6e},			/* -0.80676=f(-0.92000)*/
-{63, 0,123,__LINE__, 0xbfe9a906, 0x2bfc70e9, 0xbfed1eb8, 0x51eb851c},			/* -0.80188=f(-0.91000)*/
-{61, 0,123,__LINE__, 0xbfe98045, 0xa6c8a2e4, 0xbfeccccc, 0xccccccca},			/* -0.79690=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfe956c7, 0xa6140e08, 0xbfec7ae1, 0x47ae1478},			/* -0.79184=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfe92c8a, 0xe280f560, 0xbfec28f5, 0xc28f5c26},			/* -0.78668=f(-0.88000)*/
-{63, 0,123,__LINE__, 0xbfe9018e, 0x22858aeb, 0xbfebd70a, 0x3d70a3d4},			/* -0.78143=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfe8d5d0, 0x3adbba5e, 0xbfeb851e, 0xb851eb82},			/* -0.77610=f(-0.86000)*/
-{59, 0,123,__LINE__, 0xbfe8a950, 0x0eeffdb0, 0xbfeb3333, 0x33333330},			/* -0.77066=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfe87c0c, 0x914f1a57, 0xbfeae147, 0xae147ade},			/* -0.76514=f(-0.84000)*/
-{62, 0,123,__LINE__, 0xbfe84e04, 0xc412a632, 0xbfea8f5c, 0x28f5c28c},			/* -0.75952=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfe81f37, 0xb94c3284, 0xbfea3d70, 0xa3d70a3a},			/* -0.75381=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe7efa4, 0x936efba2, 0xbfe9eb85, 0x1eb851e8},			/* -0.74800=f(-0.81000)*/
-{63, 0,123,__LINE__, 0xbfe7bf4a, 0x85b7fb81, 0xbfe99999, 0x99999996},			/* -0.74210=f(-0.80000)*/
-{63, 0,123,__LINE__, 0xbfe78e28, 0xd4943d8d, 0xbfe947ae, 0x147ae144},			/* -0.73610=f(-0.79000)*/
-{61, 0,123,__LINE__, 0xbfe75c3e, 0xd60551ec, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.73001=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe7298b, 0xf203be84, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.72382=f(-0.77000)*/
-{61, 0,123,__LINE__, 0xbfe6f60f, 0xa2df4c2c, 0xbfe851eb, 0x851eb84e},			/* -0.71753=f(-0.76000)*/
-{62, 0,123,__LINE__, 0xbfe6c1c9, 0x759d0e5d, 0xbfe7ffff, 0xfffffffc},			/* -0.71115=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe68cb9, 0x0a53044a, 0xbfe7ae14, 0x7ae147aa},			/* -0.70467=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe656de, 0x14813204, 0xbfe75c28, 0xf5c28f58},			/* -0.69810=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe62038, 0x5b681100, 0xbfe70a3d, 0x70a3d706},			/* -0.69143=f(-0.72000)*/
-{63, 0,123,__LINE__, 0xbfe5e8c7, 0xba5c3770, 0xbfe6b851, 0xeb851eb4},			/* -0.68466=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe5b08c, 0x21171644, 0xbfe66666, 0x66666662},			/* -0.67780=f(-0.70000)*/
-{63, 0,123,__LINE__, 0xbfe57785, 0x9404ae2e, 0xbfe6147a, 0xe147ae10},			/* -0.67084=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe53db4, 0x2c8e1c72, 0xbfe5c28f, 0x5c28f5be},			/* -0.66378=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe50318, 0x1960e0ba, 0xbfe570a3, 0xd70a3d6c},			/* -0.65662=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe4c7b1, 0x9eb2bdec, 0xbfe51eb8, 0x51eb851a},			/* -0.64937=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe48b81, 0x16821878, 0xbfe4cccc, 0xccccccc8},			/* -0.64202=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe44e86, 0xf0d2b55e, 0xbfe47ae1, 0x47ae1476},			/* -0.63458=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe410c3, 0xb3e6bdc6, 0xbfe428f5, 0xc28f5c24},			/* -0.62704=f(-0.63000)*/
-{63, 0,123,__LINE__, 0xbfe3d237, 0xfc73ebfa, 0xbfe3d70a, 0x3d70a3d2},			/* -0.61941=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe392e4, 0x7dd4c73e, 0xbfe3851e, 0xb851eb80},			/* -0.61168=f(-0.61000)*/
-{61, 0,123,__LINE__, 0xbfe352ca, 0x0235d4f4, 0xbfe33333, 0x3333332e},			/* -0.60385=f(-0.60000)*/
-{61, 0,123,__LINE__, 0xbfe311e9, 0x6abea663, 0xbfe2e147, 0xae147adc},			/* -0.59593=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe2d043, 0xafb6ab88, 0xbfe28f5c, 0x28f5c28a},			/* -0.58792=f(-0.58000)*/
-{61, 0,123,__LINE__, 0xbfe28dd9, 0xe0a5b41a, 0xbfe23d70, 0xa3d70a38},			/* -0.57981=f(-0.57000)*/
-{62, 0,123,__LINE__, 0xbfe24aad, 0x2470095e, 0xbfe1eb85, 0x1eb851e6},			/* -0.57161=f(-0.56000)*/
-{62, 0,123,__LINE__, 0xbfe206be, 0xb96e0c06, 0xbfe19999, 0x99999994},			/* -0.56332=f(-0.55000)*/
-{62, 0,123,__LINE__, 0xbfe1c20f, 0xf57f4326, 0xbfe147ae, 0x147ae142},			/* -0.55493=f(-0.54000)*/
-{59, 0,123,__LINE__, 0xbfe17ca2, 0x4618c990, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.54646=f(-0.53000)*/
-{63, 0,123,__LINE__, 0xbfe13677, 0x304f0925, 0xbfe0a3d7, 0x0a3d709e},			/* -0.53789=f(-0.52000)*/
-{62, 0,123,__LINE__, 0xbfe0ef90, 0x50dab412, 0xbfe051eb, 0x851eb84c},			/* -0.52924=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfe0a7ef, 0x5c18edcc, 0xbfdfffff, 0xfffffff4},			/* -0.52049=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfe05f96, 0x1e0696a6, 0xbfdf5c28, 0xf5c28f50},			/* -0.51166=f(-0.49000)*/
-{62, 0,123,__LINE__, 0xbfe01686, 0x7a36ae59, 0xbfdeb851, 0xeb851eac},			/* -0.50274=f(-0.48000)*/
-{58, 0,123,__LINE__, 0xbfdf9984, 0xd7878660, 0xbfde147a, 0xe147ae08},			/* -0.49374=f(-0.47000)*/
-{58, 0,123,__LINE__, 0xbfdf0498, 0x0a78ca1f, 0xbfdd70a3, 0xd70a3d64},			/* -0.48465=f(-0.46000)*/
-{59, 0,123,__LINE__, 0xbfde6e4a, 0xe11529b4, 0xbfdccccc, 0xccccccc0},			/* -0.47548=f(-0.45000)*/
-{59, 0,123,__LINE__, 0xbfddd6a1, 0xddac5474, 0xbfdc28f5, 0xc28f5c1c},			/* -0.46622=f(-0.44000)*/
-{59, 0,123,__LINE__, 0xbfdd3da1, 0xb0c45711, 0xbfdb851e, 0xb851eb78},			/* -0.45688=f(-0.43000)*/
-{61, 0,123,__LINE__, 0xbfdca34f, 0x38ca297f, 0xbfdae147, 0xae147ad4},			/* -0.44746=f(-0.42000)*/
-{61, 0,123,__LINE__, 0xbfdc07af, 0x81b81855, 0xbfda3d70, 0xa3d70a30},			/* -0.43796=f(-0.41000)*/
-{62, 0,123,__LINE__, 0xbfdb6ac7, 0xc4b209f7, 0xbfd99999, 0x9999998c},			/* -0.42839=f(-0.40000)*/
-{55, 0,123,__LINE__, 0xbfdacc9d, 0x6797a300, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41873=f(-0.39000)*/
-{59, 0,123,__LINE__, 0xbfda2d35, 0xfc8c5093, 0xbfd851eb, 0x851eb844},			/* -0.40900=f(-0.38000)*/
-{58, 0,123,__LINE__, 0xbfd98c97, 0x41754260, 0xbfd7ae14, 0x7ae147a0},			/* -0.39920=f(-0.37000)*/
-{60, 0,123,__LINE__, 0xbfd8eac7, 0x1f6d614c, 0xbfd70a3d, 0x70a3d6fc},			/* -0.38932=f(-0.36000)*/
-{60, 0,123,__LINE__, 0xbfd847cb, 0xaa2f52fb, 0xbfd66666, 0x66666658},			/* -0.37938=f(-0.35000)*/
-{61, 0,123,__LINE__, 0xbfd7a3ab, 0x1f759d7d, 0xbfd5c28f, 0x5c28f5b4},			/* -0.36936=f(-0.34000)*/
-{59, 0,123,__LINE__, 0xbfd6fe6b, 0xe65101d1, 0xbfd51eb8, 0x51eb8510},			/* -0.35927=f(-0.33000)*/
-{57, 0,123,__LINE__, 0xbfd65814, 0x8e7526c1, 0xbfd47ae1, 0x47ae146c},			/* -0.34912=f(-0.32000)*/
-{61, 0,123,__LINE__, 0xbfd5b0ab, 0xcf7bb13c, 0xbfd3d70a, 0x3d70a3c8},			/* -0.33890=f(-0.31000)*/
-{54, 0,123,__LINE__, 0xbfd50838, 0x881dea00, 0xbfd33333, 0x33333324},			/* -0.32862=f(-0.30000)*/
-{61, 0,123,__LINE__, 0xbfd45ec1, 0xbd6513dd, 0xbfd28f5c, 0x28f5c280},			/* -0.31828=f(-0.29000)*/
-{59, 0,123,__LINE__, 0xbfd3b44e, 0x99d198d1, 0xbfd1eb85, 0x1eb851dc},			/* -0.30788=f(-0.28000)*/
-{61, 0,123,__LINE__, 0xbfd308e6, 0x6c79373d, 0xbfd147ae, 0x147ae138},			/* -0.29741=f(-0.27000)*/
-{60, 0,123,__LINE__, 0xbfd25c90, 0xa81c5b98, 0xbfd0a3d7, 0x0a3d7094},			/* -0.28689=f(-0.26000)*/
-{62, 0,123,__LINE__, 0xbfd1af54, 0xe232d5f7, 0xbfcfffff, 0xffffffe0},			/* -0.27632=f(-0.25000)*/
-{59, 0,123,__LINE__, 0xbfd1013a, 0xd1f01d91, 0xbfceb851, 0xeb851e98},			/* -0.26570=f(-0.24000)*/
-{59, 0,123,__LINE__, 0xbfd0524a, 0x4f3f5771, 0xbfcd70a3, 0xd70a3d50},			/* -0.25502=f(-0.23000)*/
-{61, 0,123,__LINE__, 0xbfcf4516, 0xa36eb077, 0xbfcc28f5, 0xc28f5c08},			/* -0.24429=f(-0.22000)*/
-{61, 0,123,__LINE__, 0xbfcde40b, 0xdf0db776, 0xbfcae147, 0xae147ac0},			/* -0.23352=f(-0.21000)*/
-{61, 0,123,__LINE__, 0xbfcc8184, 0xb8b25ef6, 0xbfc99999, 0x99999978},			/* -0.22270=f(-0.20000)*/
-{60, 0,123,__LINE__, 0xbfcb1d91, 0xd0672118, 0xbfc851eb, 0x851eb830},			/* -0.21183=f(-0.19000)*/
-{61, 0,123,__LINE__, 0xbfc9b843, 0xfc96fd9c, 0xbfc70a3d, 0x70a3d6e8},			/* -0.20093=f(-0.18000)*/
-{61, 0,123,__LINE__, 0xbfc851ac, 0x47ac9586, 0xbfc5c28f, 0x5c28f5a0},			/* -0.18999=f(-0.17000)*/
-{61, 0,123,__LINE__, 0xbfc6e9db, 0xeda44a66, 0xbfc47ae1, 0x47ae1458},			/* -0.17901=f(-0.16000)*/
-{61, 0,123,__LINE__, 0xbfc580e4, 0x5991f46e, 0xbfc33333, 0x33333310},			/* -0.16799=f(-0.15000)*/
-{60, 0,123,__LINE__, 0xbfc416d7, 0x231ac6ca, 0xbfc1eb85, 0x1eb851c8},			/* -0.15694=f(-0.14000)*/
-{61, 0,123,__LINE__, 0xbfc2abc6, 0x0be3fddd, 0xbfc0a3d7, 0x0a3d7080},			/* -0.14586=f(-0.13000)*/
-{60, 0,123,__LINE__, 0xbfc13fc2, 0xfcf6f709, 0xbfbeb851, 0xeb851e71},			/* -0.13475=f(-0.12000)*/
-{59, 0,123,__LINE__, 0xbfbfa5c0, 0x0836aa91, 0xbfbc28f5, 0xc28f5be2},			/* -0.12362=f(-0.11000)*/
-{58, 0,123,__LINE__, 0xbfbcca5e, 0xa24fb2e3, 0xbfb99999, 0x99999953},			/* -0.11246=f(-0.00100)*/
-{59, 0,123,__LINE__, 0xbfb9ed86, 0x669530b2, 0xbfb70a3d, 0x70a3d6c4},			/* -0.10128=f(-0.09000)*/
-{59, 0,123,__LINE__, 0xbfb70f5c, 0x2c9277d1, 0xbfb47ae1, 0x47ae1435},			/* -0.09007=f(-0.08000)*/
-{60, 0,123,__LINE__, 0xbfb43004, 0xff73fe9b, 0xbfb1eb85, 0x1eb851a6},			/* -0.07885=f(-0.07000)*/
-{61, 0,123,__LINE__, 0xbfb14fa6, 0x186c319d, 0xbfaeb851, 0xeb851e2d},			/* -0.06762=f(-0.06000)*/
-{58, 0,123,__LINE__, 0xbfacdcc9, 0xb2191922, 0xbfa99999, 0x9999990e},			/* -0.05637=f(-0.05000)*/
-{60, 0,123,__LINE__, 0xbfa718cd, 0x8b28cd39, 0xbfa47ae1, 0x47ae13ef},			/* -0.04511=f(-0.04000)*/
-{62, 0,123,__LINE__, 0xbfa153a2, 0xfe6dc79b, 0xbf9eb851, 0xeb851da0},			/* -0.03384=f(-0.03000)*/
-{60, 0,123,__LINE__, 0xbf971b2a, 0xf966026a, 0xbf947ae1, 0x47ae1362},			/* -0.02256=f(-0.02000)*/
-{61, 0,123,__LINE__, 0xbf871bc2, 0x666578ec, 0xbf847ae1, 0x47ae1249},			/* -0.01128=f(-0.00010)*/
-{60, 0,123,__LINE__, 0x3cd3d131, 0x57191c9a, 0x3cd19000, 0x00000000},			/* 1.10007e-15=f(9.74915e-16)*/
-{61, 0,123,__LINE__, 0x3f871bc2, 0x66657ddf, 0x3f847ae1, 0x47ae16ad},			/* 0.01128=f(0.01000)*/
-{61, 0,123,__LINE__, 0x3f971b2a, 0xf96604e4, 0x3f947ae1, 0x47ae1594},			/* 0.02256=f(0.02000)*/
-{60, 0,123,__LINE__, 0x3fa153a2, 0xfe6dc8d8, 0x3f9eb851, 0xeb851fd2},			/* 0.03384=f(0.03000)*/
-{61, 0,123,__LINE__, 0x3fa718cd, 0x8b28ce75, 0x3fa47ae1, 0x47ae1508},			/* 0.04511=f(0.04000)*/
-{60, 0,123,__LINE__, 0x3facdcc9, 0xb2191a5d, 0x3fa99999, 0x99999a27},			/* 0.05637=f(0.05000)*/
-{60, 0,123,__LINE__, 0x3fb14fa6, 0x186c323a, 0x3faeb851, 0xeb851f46},			/* 0.06762=f(0.06000)*/
-{62, 0,123,__LINE__, 0x3fb43004, 0xff73ff37, 0x3fb1eb85, 0x1eb85232},			/* 0.07885=f(0.07000)*/
-{61, 0,123,__LINE__, 0x3fb70f5c, 0x2c92786f, 0x3fb47ae1, 0x47ae14c1},			/* 0.09007=f(0.08000)*/
-{59, 0,123,__LINE__, 0x3fb9ed86, 0x66953151, 0x3fb70a3d, 0x70a3d750},			/* 0.10128=f(0.09000)*/
-{56, 0,123,__LINE__, 0x3fbcca5e, 0xa24fb380, 0x3fb99999, 0x999999df},			/* 0.11246=f(0.10000)*/
-{60, 0,123,__LINE__, 0x3fbfa5c0, 0x0836ab2c, 0x3fbc28f5, 0xc28f5c6e},			/* 0.12362=f(0.11000)*/
-{60, 0,123,__LINE__, 0x3fc13fc2, 0xfcf6f758, 0x3fbeb851, 0xeb851efd},			/* 0.13475=f(0.12000)*/
-{62, 0,123,__LINE__, 0x3fc2abc6, 0x0be3fe2b, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.14586=f(0.13000)*/
-{60, 0,123,__LINE__, 0x3fc416d7, 0x231ac718, 0x3fc1eb85, 0x1eb8520e},			/* 0.15694=f(0.14000)*/
-{62, 0,123,__LINE__, 0x3fc580e4, 0x5991f4bb, 0x3fc33333, 0x33333356},			/* 0.16799=f(0.15000)*/
-{59, 0,123,__LINE__, 0x3fc6e9db, 0xeda44ab2, 0x3fc47ae1, 0x47ae149e},			/* 0.17901=f(0.16000)*/
-{59, 0,123,__LINE__, 0x3fc851ac, 0x47ac95d2, 0x3fc5c28f, 0x5c28f5e6},			/* 0.18999=f(0.17000)*/
-{60, 0,123,__LINE__, 0x3fc9b843, 0xfc96fde9, 0x3fc70a3d, 0x70a3d72e},			/* 0.20093=f(0.18000)*/
-{61, 0,123,__LINE__, 0x3fcb1d91, 0xd0672165, 0x3fc851eb, 0x851eb876},			/* 0.21183=f(0.19000)*/
-{57, 0,123,__LINE__, 0x3fcc8184, 0xb8b25f42, 0x3fc99999, 0x999999be},			/* 0.22270=f(0.20000)*/
-{57, 0,123,__LINE__, 0x3fcde40b, 0xdf0db7c1, 0x3fcae147, 0xae147b06},			/* 0.23352=f(0.21000)*/
-{57, 0,123,__LINE__, 0x3fcf4516, 0xa36eb0c2, 0x3fcc28f5, 0xc28f5c4e},			/* 0.24429=f(0.22000)*/
-{62, 0,123,__LINE__, 0x3fd0524a, 0x4f3f5797, 0x3fcd70a3, 0xd70a3d96},			/* 0.25502=f(0.23000)*/
-{61, 0,123,__LINE__, 0x3fd1013a, 0xd1f01db6, 0x3fceb851, 0xeb851ede},			/* 0.26570=f(0.24000)*/
-{61, 0,123,__LINE__, 0x3fd1af54, 0xe232d61c, 0x3fd00000, 0x00000013},			/* 0.27632=f(0.25000)*/
-{61, 0,123,__LINE__, 0x3fd25c90, 0xa81c5bbe, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.28689=f(0.26000)*/
-{58, 0,123,__LINE__, 0x3fd308e6, 0x6c793761, 0x3fd147ae, 0x147ae15b},			/* 0.29741=f(0.27000)*/
-{61, 0,123,__LINE__, 0x3fd3b44e, 0x99d198f6, 0x3fd1eb85, 0x1eb851ff},			/* 0.30788=f(0.28000)*/
-{53, 0,123,__LINE__, 0x3fd45ec1, 0xbd651401, 0x3fd28f5c, 0x28f5c2a3},			/* 0.31828=f(0.29000)*/
-{62, 0,123,__LINE__, 0x3fd50838, 0x881dea23, 0x3fd33333, 0x33333347},			/* 0.32862=f(0.30000)*/
-{58, 0,123,__LINE__, 0x3fd5b0ab, 0xcf7bb160, 0x3fd3d70a, 0x3d70a3eb},			/* 0.33890=f(0.31000)*/
-{61, 0,123,__LINE__, 0x3fd65814, 0x8e7526e5, 0x3fd47ae1, 0x47ae148f},			/* 0.34912=f(0.32000)*/
-{61, 0,123,__LINE__, 0x3fd6fe6b, 0xe65101f5, 0x3fd51eb8, 0x51eb8533},			/* 0.35927=f(0.33000)*/
-{58, 0,123,__LINE__, 0x3fd7a3ab, 0x1f759da1, 0x3fd5c28f, 0x5c28f5d7},			/* 0.36936=f(0.34000)*/
-{61, 0,123,__LINE__, 0x3fd847cb, 0xaa2f531d, 0x3fd66666, 0x6666667b},			/* 0.37938=f(0.35000)*/
-{61, 0,123,__LINE__, 0x3fd8eac7, 0x1f6d616e, 0x3fd70a3d, 0x70a3d71f},			/* 0.38932=f(0.36000)*/
-{56, 0,123,__LINE__, 0x3fd98c97, 0x41754282, 0x3fd7ae14, 0x7ae147c3},			/* 0.39920=f(0.37000)*/
-{61, 0,123,__LINE__, 0x3fda2d35, 0xfc8c50b4, 0x3fd851eb, 0x851eb867},			/* 0.40900=f(0.38000)*/
-{58, 0,123,__LINE__, 0x3fdacc9d, 0x6797a323, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41873=f(0.39000)*/
-{60, 0,123,__LINE__, 0x3fdb6ac7, 0xc4b20a19, 0x3fd99999, 0x999999af},			/* 0.42839=f(0.40000)*/
-{61, 0,123,__LINE__, 0x3fdc07af, 0x81b81876, 0x3fda3d70, 0xa3d70a53},			/* 0.43796=f(0.41000)*/
-{58, 0,123,__LINE__, 0x3fdca34f, 0x38ca29a0, 0x3fdae147, 0xae147af7},			/* 0.44746=f(0.42000)*/
-{59, 0,123,__LINE__, 0x3fdd3da1, 0xb0c45731, 0x3fdb851e, 0xb851eb9b},			/* 0.45688=f(0.43000)*/
-{59, 0,123,__LINE__, 0x3fddd6a1, 0xddac5494, 0x3fdc28f5, 0xc28f5c3f},			/* 0.46622=f(0.44000)*/
-{59, 0,123,__LINE__, 0x3fde6e4a, 0xe11529d3, 0x3fdccccc, 0xcccccce3},			/* 0.47548=f(0.45000)*/
-{61, 0,123,__LINE__, 0x3fdf0498, 0x0a78ca3e, 0x3fdd70a3, 0xd70a3d87},			/* 0.48465=f(0.46000)*/
-{56, 0,123,__LINE__, 0x3fdf9984, 0xd787867e, 0x3fde147a, 0xe147ae2b},			/* 0.49374=f(0.47000)*/
-{60, 0,123,__LINE__, 0x3fe01686, 0x7a36ae67, 0x3fdeb851, 0xeb851ecf},			/* 0.50274=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe05f96, 0x1e0696b6, 0x3fdf5c28, 0xf5c28f73},			/* 0.51166=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe0a7ef, 0x5c18eddc, 0x3fe00000, 0x0000000b},			/* 0.52049=f(0.50000)*/
-{62, 0,123,__LINE__, 0x3fe0ef90, 0x50dab421, 0x3fe051eb, 0x851eb85d},			/* 0.52924=f(0.51000)*/
-{61, 0,123,__LINE__, 0x3fe13677, 0x304f0933, 0x3fe0a3d7, 0x0a3d70af},			/* 0.53789=f(0.52000)*/
-{58, 0,123,__LINE__, 0x3fe17ca2, 0x4618c9a0, 0x3fe0f5c2, 0x8f5c2901},			/* 0.54646=f(0.53000)*/
-{63, 0,123,__LINE__, 0x3fe1c20f, 0xf57f4335, 0x3fe147ae, 0x147ae153},			/* 0.55493=f(0.54000)*/
-{63, 0,123,__LINE__, 0x3fe206be, 0xb96e0c15, 0x3fe19999, 0x999999a5},			/* 0.56332=f(0.55000)*/
-{62, 0,123,__LINE__, 0x3fe24aad, 0x2470096a, 0x3fe1eb85, 0x1eb851f7},			/* 0.57161=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe28dd9, 0xe0a5b42a, 0x3fe23d70, 0xa3d70a49},			/* 0.57981=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe2d043, 0xafb6ab96, 0x3fe28f5c, 0x28f5c29b},			/* 0.58792=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe311e9, 0x6abea670, 0x3fe2e147, 0xae147aed},			/* 0.59593=f(0.59000)*/
-{63, 0,123,__LINE__, 0x3fe352ca, 0x0235d4ff, 0x3fe33333, 0x3333333f},			/* 0.60385=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3fe392e4, 0x7dd4c74a, 0x3fe3851e, 0xb851eb91},			/* 0.61168=f(0.61000)*/
-{60, 0,123,__LINE__, 0x3fe3d237, 0xfc73ec06, 0x3fe3d70a, 0x3d70a3e3},			/* 0.61941=f(0.62000)*/
-{61, 0,123,__LINE__, 0x3fe410c3, 0xb3e6bdd3, 0x3fe428f5, 0xc28f5c35},			/* 0.62704=f(0.63000)*/
-{61, 0,123,__LINE__, 0x3fe44e86, 0xf0d2b56b, 0x3fe47ae1, 0x47ae1487},			/* 0.63458=f(0.64000)*/
-{62, 0,123,__LINE__, 0x3fe48b81, 0x16821885, 0x3fe4cccc, 0xccccccd9},			/* 0.64202=f(0.65000)*/
-{63, 0,123,__LINE__, 0x3fe4c7b1, 0x9eb2bdf8, 0x3fe51eb8, 0x51eb852b},			/* 0.64937=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe50318, 0x1960e0c6, 0x3fe570a3, 0xd70a3d7d},			/* 0.65662=f(0.67000)*/
-{63, 0,123,__LINE__, 0x3fe53db4, 0x2c8e1c7e, 0x3fe5c28f, 0x5c28f5cf},			/* 0.66378=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe57785, 0x9404ae3a, 0x3fe6147a, 0xe147ae21},			/* 0.67084=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe5b08c, 0x21171650, 0x3fe66666, 0x66666673},			/* 0.67780=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe5e8c7, 0xba5c377d, 0x3fe6b851, 0xeb851ec5},			/* 0.68466=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe62038, 0x5b68110c, 0x3fe70a3d, 0x70a3d717},			/* 0.69143=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe656de, 0x14813210, 0x3fe75c28, 0xf5c28f69},			/* 0.69810=f(0.73000)*/
-{62, 0,123,__LINE__, 0x3fe68cb9, 0x0a530456, 0x3fe7ae14, 0x7ae147bb},			/* 0.70467=f(0.74000)*/
-{63, 0,123,__LINE__, 0x3fe6c1c9, 0x759d0e67, 0x3fe80000, 0x0000000d},			/* 0.71115=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe6f60f, 0xa2df4c36, 0x3fe851eb, 0x851eb85f},			/* 0.71753=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe7298b, 0xf203be90, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.72382=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe75c3e, 0xd60551f6, 0x3fe8f5c2, 0x8f5c2903},			/* 0.73001=f(0.78000)*/
-{63, 0,123,__LINE__, 0x3fe78e28, 0xd4943d97, 0x3fe947ae, 0x147ae155},			/* 0.73610=f(0.79000)*/
-{63, 0,123,__LINE__, 0x3fe7bf4a, 0x85b7fb8b, 0x3fe99999, 0x999999a7},			/* 0.74210=f(0.80000)*/
-{63, 0,123,__LINE__, 0x3fe7efa4, 0x936efbaa, 0x3fe9eb85, 0x1eb851f9},			/* 0.74800=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe81f37, 0xb94c328e, 0x3fea3d70, 0xa3d70a4b},			/* 0.75381=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe84e04, 0xc412a63b, 0x3fea8f5c, 0x28f5c29d},			/* 0.75952=f(0.83000)*/
-{63, 0,123,__LINE__, 0x3fe87c0c, 0x914f1a61, 0x3feae147, 0xae147aef},			/* 0.76514=f(0.84000)*/
-{63, 0,123,__LINE__, 0x3fe8a950, 0x0eeffdb9, 0x3feb3333, 0x33333341},			/* 0.77066=f(0.85000)*/
-{63, 0,123,__LINE__, 0x3fe8d5d0, 0x3adbba67, 0x3feb851e, 0xb851eb93},			/* 0.77610=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe9018e, 0x22858af4, 0x3febd70a, 0x3d70a3e5},			/* 0.78143=f(0.87000)*/
-{62, 0,123,__LINE__, 0x3fe92c8a, 0xe280f56a, 0x3fec28f5, 0xc28f5c37},			/* 0.78668=f(0.88000)*/
-{62, 0,123,__LINE__, 0x3fe956c7, 0xa6140e12, 0x3fec7ae1, 0x47ae1489},			/* 0.79184=f(0.89000)*/
-{63, 0,123,__LINE__, 0x3fe98045, 0xa6c8a2ed, 0x3feccccc, 0xccccccdb},			/* 0.79690=f(0.90000)*/
-{62, 0,123,__LINE__, 0x3fe9a906, 0x2bfc70f2, 0x3fed1eb8, 0x51eb852d},			/* 0.80188=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe9d10a, 0x8a7083ae, 0x3fed70a3, 0xd70a3d7f},			/* 0.80676=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe9f854, 0x23d7dfb7, 0x3fedc28f, 0x5c28f5d1},			/* 0.81156=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fea1ee4, 0x666597da, 0x3fee147a, 0xe147ae23},			/* 0.81627=f(0.94000)*/
-{63, 0,123,__LINE__, 0x3fea44bc, 0xcc5a6cb6, 0x3fee6666, 0x66666675},			/* 0.82089=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fea69de, 0xdb9215d4, 0x3feeb851, 0xeb851ec7},			/* 0.82542=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fea8e4c, 0x251052fa, 0x3fef0a3d, 0x70a3d719},			/* 0.82987=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3feab206, 0x448de3f7, 0x3fef5c28, 0xf5c28f6b},			/* 0.83423=f(0.98000)*/
-{63, 0,123,__LINE__, 0x3fead50e, 0xe0058460, 0x3fefae14, 0x7ae147bd},			/* 0.83850=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3feaf767, 0xa7410890, 0x3ff00000, 0x00000007},			/* 0.84270=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3feb1912, 0x5366b82d, 0x3ff028f5, 0xc28f5c30},			/* 0.84681=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3feb3a10, 0xa6870232, 0x3ff051eb, 0x851eb859},			/* 0.85083=f(1.02000)*/
-{62, 0,123,__LINE__, 0x3feb5a64, 0x6b2aa5a2, 0x3ff07ae1, 0x47ae1482},			/* 0.85478=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3feb7a0f, 0x73e1696d, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.85864=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3feb9913, 0x9ad17d60, 0x3ff0cccc, 0xccccccd4},			/* 0.86243=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3febb772, 0xc1479d29, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.86614=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3febd52e, 0xcf480de6, 0x3ff11eb8, 0x51eb8526},			/* 0.86977=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3febf249, 0xb3208dc2, 0x3ff147ae, 0x147ae14f},			/* 0.87332=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fec0ec5, 0x60fb4c76, 0x3ff170a3, 0xd70a3d78},			/* 0.87680=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fec2aa3, 0xd27302c4, 0x3ff19999, 0x999999a1},			/* 0.88020=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fec45e7, 0x06283e15, 0x3ff1c28f, 0x5c28f5ca},			/* 0.88353=f(1.11000)*/
-{58, 0,123,__LINE__, 0x3fec6090, 0xff57f4a0, 0x3ff1eb85, 0x1eb851f3},			/* 0.88678=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fec7aa3, 0xc57375bc, 0x3ff2147a, 0xe147ae1c},			/* 0.88997=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fec9421, 0x63b9c910, 0x3ff23d70, 0xa3d70a45},			/* 0.89308=f(1.14000)*/
-{61, 0,123,__LINE__, 0x3fecad0b, 0xe8d28e7b, 0x3ff26666, 0x6666666e},			/* 0.89612=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fecc565, 0x666a6fca, 0x3ff28f5c, 0x28f5c297},			/* 0.89909=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fecdd2f, 0xf0d1346a, 0x3ff2b851, 0xeb851ec0},			/* 0.90200=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fecf46d, 0x9e998656, 0x3ff2e147, 0xae147ae9},			/* 0.90483=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fed0b20, 0x883a76d3, 0x3ff30a3d, 0x70a3d712},			/* 0.90760=f(1.19000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -1.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfff459c2, 0xc012d97c, 0x7f3321d2},			/* -0.01000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xbfefffed, 0x62a7bb7c, 0xc00921fb, 0x54442d18},			/* -0.99999=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xbfef2860, 0xb4807f6c, 0xbff921fb, 0x54442d18},			/* -0.97367=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3fef2860, 0xb4807f6c, 0x3ff921fb, 0x54442d18},			/* 0.97367=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3fefffed, 0x62a7bb7c, 0x400921fb, 0x54442d18},			/* 0.99999=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfff459c2, 0x4012d97c, 0x7f3321d2},			/* 0.01000=f(4.71238)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03e0000, 0x00000000},			/* -1.00000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -1.00000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -1.00000=f(-26.6000)*/
-{61,16, 40,__LINE__, 0x3fd3fc07, 0xd7b9d768, 0xc038e666, 0x66666667},			/* 0.31225=f(-24.9000)*/
-{60,16, 40,__LINE__, 0x3ffbcbd0, 0x29e037f4, 0xc0373333, 0x33333334},			/* 1.73725=f(-23.2000)*/
-{63,16, 40,__LINE__, 0x401118ea, 0x36ea6e76, 0xc0358000, 0x00000001},			/* 4.27433=f(-21.5000)*/
-{59,16, 40,__LINE__, 0xbfca8988, 0x7894ab50, 0xc033cccc, 0xccccccce},			/* -0.20732=f(-19.8000)*/
-{60,16, 40,__LINE__, 0x3fe3a675, 0x0e430856, 0xc0321999, 0x9999999b},			/* 0.61406=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0306666, 0x66666668},			/* -1.00000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -1.00000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02a0000, 0x00000004},			/* -1.00000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0269999, 0x9999999e},			/* -1.00000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0233333, 0x33333338},			/* -1.00000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -1.00000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -1.00000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffa9bd6a, 0xc0120000, 0x00000009},			/* -0.01000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbfefff62, 0xaf990752, 0xc0066666, 0x66666678},			/* -0.99992=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbfec2aa3, 0xd27302d7, 0xbff19999, 0x999999bd},			/* -0.88020=f(-1.10000)*/
-{63, 0,123,__LINE__, 0x3fe352ca, 0x0235d4be, 0x3fe33333, 0x333332ec},			/* 0.60385=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3feff6a2, 0x95bcd35c, 0x40026666, 0x66666654},			/* 0.99885=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xf7b91176, 0x400fffff, 0xffffffee},			/* 0.99999=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffffea, 0x4016cccc, 0xccccccc4},			/* 0.01000=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x401d9999, 0x99999991},			/* 1.00000=f(7.40000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40223333, 0x3333332f},			/* 1.00000=f(9.10000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40259999, 0x99999995},			/* 1.00000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 1.00000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402c6666, 0x66666661},			/* 1.00000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 1.00000=f(15.9000)*/
-{62,16, 40,__LINE__, 0xbfe72550, 0x5ab7d1b4, 0x40319999, 0x99999997},			/* -0.72330=f(17.6000)*/
-{61,16, 40,__LINE__, 0x3fc292f8, 0xb49b2624, 0x40334ccc, 0xccccccca},			/* 0.14511=f(19.3000)*/
-{63,16, 40,__LINE__, 0x3fe36f0f, 0xb6cd32cb, 0x4034ffff, 0xfffffffd},			/* 0.60730=f(21.0000)*/
-{59,16, 40,__LINE__, 0xbffd52c0, 0x3f2df2ee, 0x4036b333, 0x33333330},			/* -1.83270=f(22.7000)*/
-{60,16, 40,__LINE__, 0xbfd7dfcb, 0xce3843a0, 0x40386666, 0x66666663},			/* -0.37303=f(24.4000)*/
-{62,16, 40,__LINE__, 0x3fd8acb7, 0x085483b2, 0x403a1999, 0x99999996},			/* 0.38554=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 1.00000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 1.00000=f(29.5000)*/
-0,};
-test_erf(m)   {run_vector_1(m,erf_vec,(char *)(erf),"erf","dd");   }	
diff --git a/newlib/libm/test/erfc_vec.c b/newlib/libm/test/erfc_vec.c
deleted file mode 100644
index 4579d31fd..000000000
--- a/newlib/libm/test/erfc_vec.c
+++ /dev/null
@@ -1,286 +0,0 @@
-#include "test.h"
- one_line_type erfc_vec[] = {
-{64, 0,123,__LINE__, 0x3ffe90a5, 0x63d96834, 0xbff33333, 0x33333333},			/* 1.91031=f(-1.20000)*/
-{64, 0,123,__LINE__, 0x3ffe8590, 0x441d3b67, 0xbff30a3d, 0x70a3d70a},			/* 1.90760=f(-1.19000)*/
-{64, 0,123,__LINE__, 0x3ffe7a36, 0xcf4cc329, 0xbff2e147, 0xae147ae1},			/* 1.90483=f(-1.18000)*/
-{64, 0,123,__LINE__, 0x3ffe6e97, 0xf8689a32, 0xbff2b851, 0xeb851eb8},			/* 1.90200=f(-1.17000)*/
-{63, 0,123,__LINE__, 0x3ffe62b2, 0xb33537e3, 0xbff28f5c, 0x28f5c28f},			/* 1.89909=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3ffe5685, 0xf469473b, 0xbff26666, 0x66666666},			/* 1.89612=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3ffe4a10, 0xb1dce486, 0xbff23d70, 0xa3d70a3d},			/* 1.89308=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3ffe3d51, 0xe2b9badb, 0xbff2147a, 0xe147ae14},			/* 1.88997=f(-1.13000)*/
-{64, 0,123,__LINE__, 0x3ffe3048, 0x7fabfa4d, 0xbff1eb85, 0x1eb851eb},			/* 1.88678=f(-1.12000)*/
-{64, 0,123,__LINE__, 0x3ffe22f3, 0x83141f08, 0xbff1c28f, 0x5c28f5c2},			/* 1.88353=f(-1.11000)*/
-{64, 0,123,__LINE__, 0x3ffe1551, 0xe9398160, 0xbff19999, 0x99999999},			/* 1.88020=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3ffe0762, 0xb07da638, 0xbff170a3, 0xd70a3d70},			/* 1.87680=f(-1.09000)*/
-{64, 0,123,__LINE__, 0x3ffdf924, 0xd99046de, 0xbff147ae, 0x147ae147},			/* 1.87332=f(-1.08000)*/
-{64, 0,123,__LINE__, 0x3ffdea97, 0x67a406f0, 0xbff11eb8, 0x51eb851e},			/* 1.86977=f(-1.07000)*/
-{64, 0,123,__LINE__, 0x3ffddbb9, 0x60a3ce91, 0xbff0f5c2, 0x8f5c28f5},			/* 1.86614=f(-1.06000)*/
-{64, 0,123,__LINE__, 0x3ffdcc89, 0xcd68bead, 0xbff0cccc, 0xcccccccc},			/* 1.86243=f(-1.05000)*/
-{64, 0,123,__LINE__, 0x3ffdbd07, 0xb9f0b4b3, 0xbff0a3d7, 0x0a3d70a3},			/* 1.85865=f(-1.04000)*/
-{62, 0,123,__LINE__, 0x3ffdad32, 0x359552ce, 0xbff07ae1, 0x47ae147a},			/* 1.85478=f(-1.03000)*/
-{64, 0,123,__LINE__, 0x3ffd9d08, 0x53438116, 0xbff051eb, 0x851eb851},			/* 1.85083=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3ffd8c89, 0x29b35c14, 0xbff028f5, 0xc28f5c28},			/* 1.84681=f(-1.01000)*/
-{63, 0,123,__LINE__, 0x3ffd7bb3, 0xd3a08445, 0xbfefffff, 0xfffffffe},			/* 1.84270=f(-0.01000)*/
-{63, 0,123,__LINE__, 0x3ffd6a87, 0x7002c22c, 0xbfefae14, 0x7ae147ac},			/* 1.83850=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3ffd5903, 0x2246f1f8, 0xbfef5c28, 0xf5c28f5a},			/* 1.83423=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3ffd4726, 0x1288297a, 0xbfef0a3d, 0x70a3d708},			/* 1.82987=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3ffd34ef, 0x6dc90ae6, 0xbfeeb851, 0xeb851eb6},			/* 1.82542=f(-0.96000)*/
-{60, 0,123,__LINE__, 0x3ffd225e, 0x662d3657, 0xbfee6666, 0x66666664},			/* 1.82089=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3ffcfc2a, 0x11ebefd7, 0xbfedc28f, 0x5c28f5c0},			/* 1.81156=f(-0.93000)*/
-{63, 0,123,__LINE__, 0x3ffce885, 0x453841d3, 0xbfed70a3, 0xd70a3d6e},			/* 1.80676=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x3ffcd483, 0x15fe3874, 0xbfed1eb8, 0x51eb851c},			/* 1.80188=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3ffcc022, 0xd3645172, 0xbfeccccc, 0xccccccca},			/* 1.79690=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x3ffcab63, 0xd30a0704, 0xbfec7ae1, 0x47ae1478},			/* 1.79184=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x3ffc9645, 0x71407ab0, 0xbfec28f5, 0xc28f5c26},			/* 1.78668=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3ffc80c7, 0x1142c575, 0xbfebd70a, 0x3d70a3d4},			/* 1.78144=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x3ffc6ae8, 0x1d6ddd2f, 0xbfeb851e, 0xb851eb82},			/* 1.77610=f(-0.86000)*/
-{60, 0,123,__LINE__, 0x3ffc54a8, 0x0777fed8, 0xbfeb3333, 0x33333330},			/* 1.77066=f(-0.85000)*/
-{61, 0,123,__LINE__, 0x3ffc3e06, 0x48a78d2c, 0xbfeae147, 0xae147ade},			/* 1.76514=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x3ffc2702, 0x62095319, 0xbfea8f5c, 0x28f5c28c},			/* 1.75952=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3ffc0f9b, 0xdca61942, 0xbfea3d70, 0xa3d70a3a},			/* 1.75381=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3ffbf7d2, 0x49b77dd1, 0xbfe9eb85, 0x1eb851e8},			/* 1.74800=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3ffbdfa5, 0x42dbfdc0, 0xbfe99999, 0x99999996},			/* 1.74210=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3ffbc714, 0x6a4a1ec6, 0xbfe947ae, 0x147ae144},			/* 1.73610=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3ffbae1f, 0x6b02a8f6, 0xbfe8f5c2, 0x8f5c28f2},			/* 1.73001=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3ffb94c5, 0xf901df42, 0xbfe8a3d7, 0x0a3d70a0},			/* 1.72382=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3ffb7b07, 0xd16fa616, 0xbfe851eb, 0x851eb84e},			/* 1.71753=f(-0.76000)*/
-{63, 0,123,__LINE__, 0x3ffb60e4, 0xbace872e, 0xbfe7ffff, 0xfffffffc},			/* 1.71115=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x3ffb465c, 0x85298225, 0xbfe7ae14, 0x7ae147aa},			/* 1.70467=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3ffb2b6f, 0x0a409902, 0xbfe75c28, 0xf5c28f58},			/* 1.69810=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3ffb101c, 0x2db40880, 0xbfe70a3d, 0x70a3d706},			/* 1.69143=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3ffaf463, 0xdd2e1bb8, 0xbfe6b851, 0xeb851eb4},			/* 1.68466=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3ffad846, 0x108b8b22, 0xbfe66666, 0x66666662},			/* 1.67780=f(-0.70000)*/
-{60, 0,123,__LINE__, 0x3ffabbc2, 0xca025717, 0xbfe6147a, 0xe147ae10},			/* 1.67084=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3ffa9eda, 0x16470e39, 0xbfe5c28f, 0x5c28f5be},			/* 1.66378=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3ffa818c, 0x0cb0705d, 0xbfe570a3, 0xd70a3d6c},			/* 1.65662=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3ffa63d8, 0xcf595ef6, 0xbfe51eb8, 0x51eb851a},			/* 1.64937=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x3ffa45c0, 0x8b410c3c, 0xbfe4cccc, 0xccccccc8},			/* 1.64202=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x3ffa2743, 0x78695aaf, 0xbfe47ae1, 0x47ae1476},			/* 1.63458=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3ffa0861, 0xd9f35ee3, 0xbfe428f5, 0xc28f5c24},			/* 1.62704=f(-0.63000)*/
-{62, 0,123,__LINE__, 0x3ff9e91b, 0xfe39f5fd, 0xbfe3d70a, 0x3d70a3d2},			/* 1.61941=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3ff9c972, 0x3eea639f, 0xbfe3851e, 0xb851eb80},			/* 1.61168=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3ff9a965, 0x011aea7a, 0xbfe33333, 0x3333332e},			/* 1.60385=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3ff988f4, 0xb55f5332, 0xbfe2e147, 0xae147adc},			/* 1.59593=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3ff96821, 0xd7db55c4, 0xbfe28f5c, 0x28f5c28a},			/* 1.58792=f(-0.58000)*/
-{62, 0,123,__LINE__, 0x3ff946ec, 0xf052da0d, 0xbfe23d70, 0xa3d70a38},			/* 1.57981=f(-0.57000)*/
-{63, 0,123,__LINE__, 0x3ff92556, 0x923804af, 0xbfe1eb85, 0x1eb851e6},			/* 1.57161=f(-0.56000)*/
-{63, 0,123,__LINE__, 0x3ff9035f, 0x5cb70603, 0xbfe19999, 0x99999994},			/* 1.56332=f(-0.55000)*/
-{63, 0,123,__LINE__, 0x3ff8e107, 0xfabfa193, 0xbfe147ae, 0x147ae142},			/* 1.55493=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3ff8be51, 0x230c64c8, 0xbfe0f5c2, 0x8f5c28f0},			/* 1.54646=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3ff89b3b, 0x98278492, 0xbfe0a3d7, 0x0a3d709e},			/* 1.53789=f(-0.52000)*/
-{63, 0,123,__LINE__, 0x3ff877c8, 0x286d5a09, 0xbfe051eb, 0x851eb84c},			/* 1.52924=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3ff853f7, 0xae0c76e6, 0xbfdfffff, 0xfffffff4},			/* 1.52050=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3ff82fcb, 0x0f034b53, 0xbfdf5c28, 0xf5c28f50},			/* 1.51166=f(-0.49000)*/
-{63, 0,123,__LINE__, 0x3ff80b43, 0x3d1b572c, 0xbfdeb851, 0xeb851eac},			/* 1.50275=f(-0.48000)*/
-{60, 0,123,__LINE__, 0x3ff7e661, 0x35e1e198, 0xbfde147a, 0xe147ae08},			/* 1.49374=f(-0.47000)*/
-{60, 0,123,__LINE__, 0x3ff7c126, 0x029e3288, 0xbfdd70a3, 0xd70a3d64},			/* 1.48465=f(-0.46000)*/
-{63, 0,123,__LINE__, 0x3ff79b92, 0xb8454a6d, 0xbfdccccc, 0xccccccc0},			/* 1.47548=f(-0.45000)*/
-{63, 0,123,__LINE__, 0x3ff775a8, 0x776b151d, 0xbfdc28f5, 0xc28f5c1c},			/* 1.46622=f(-0.44000)*/
-{61, 0,123,__LINE__, 0x3ff74f68, 0x6c3115c4, 0xbfdb851e, 0xb851eb78},			/* 1.45688=f(-0.43000)*/
-{58, 0,123,__LINE__, 0x3ff728d3, 0xce328a60, 0xbfdae147, 0xae147ad4},			/* 1.44746=f(-0.42000)*/
-{63, 0,123,__LINE__, 0x3ff701eb, 0xe06e0615, 0xbfda3d70, 0xa3d70a30},			/* 1.43796=f(-0.41000)*/
-{62, 0,123,__LINE__, 0x3ff6dab1, 0xf12c827e, 0xbfd99999, 0x9999998c},			/* 1.42839=f(-0.40000)*/
-{57, 0,123,__LINE__, 0x3ff6b327, 0x59e5e8c0, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.41873=f(-0.39000)*/
-{63, 0,123,__LINE__, 0x3ff68b4d, 0x7f231425, 0xbfd851eb, 0x851eb844},			/* 1.40900=f(-0.38000)*/
-{60, 0,123,__LINE__, 0x3ff66325, 0xd05d5098, 0xbfd7ae14, 0x7ae147a0},			/* 1.39920=f(-0.37000)*/
-{63, 0,123,__LINE__, 0x3ff63ab1, 0xc7db5853, 0xbfd70a3d, 0x70a3d6fc},			/* 1.38933=f(-0.36000)*/
-{63, 0,123,__LINE__, 0x3ff611f2, 0xea8bd4bf, 0xbfd66666, 0x66666658},			/* 1.37938=f(-0.35000)*/
-{63, 0,123,__LINE__, 0x3ff5e8ea, 0xc7dd675f, 0xbfd5c28f, 0x5c28f5b4},			/* 1.36936=f(-0.34000)*/
-{61, 0,123,__LINE__, 0x3ff5bf9a, 0xf9944074, 0xbfd51eb8, 0x51eb8510},			/* 1.35927=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3ff59605, 0x239d49b0, 0xbfd47ae1, 0x47ae146c},			/* 1.34912=f(-0.32000)*/
-{63, 0,123,__LINE__, 0x3ff56c2a, 0xf3deec4f, 0xbfd3d70a, 0x3d70a3c8},			/* 1.33890=f(-0.31000)*/
-{56, 0,123,__LINE__, 0x3ff5420e, 0x22077a80, 0xbfd33333, 0x33333324},			/* 1.32862=f(-0.30000)*/
-{63, 0,123,__LINE__, 0x3ff517b0, 0x6f5944f7, 0xbfd28f5c, 0x28f5c280},			/* 1.31828=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3ff4ed13, 0xa6746634, 0xbfd1eb85, 0x1eb851dc},			/* 1.30788=f(-0.28000)*/
-{63, 0,123,__LINE__, 0x3ff4c239, 0x9b1e4dcf, 0xbfd147ae, 0x147ae138},			/* 1.29741=f(-0.27000)*/
-{62, 0,123,__LINE__, 0x3ff49724, 0x2a0716e6, 0xbfd0a3d7, 0x0a3d7094},			/* 1.28690=f(-0.26000)*/
-{62, 0,123,__LINE__, 0x3ff46bd5, 0x388cb57e, 0xbfcfffff, 0xffffffe0},			/* 1.27632=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3ff4404e, 0xb47c0764, 0xbfceb851, 0xeb851e98},			/* 1.26570=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3ff41492, 0x93cfd5dc, 0xbfcd70a3, 0xd70a3d50},			/* 1.25502=f(-0.23000)*/
-{63, 0,123,__LINE__, 0x3ff3e8a2, 0xd46dd60f, 0xbfcc28f5, 0xc28f5c08},			/* 1.24429=f(-0.22000)*/
-{63, 0,123,__LINE__, 0x3ff3bc81, 0x7be1b6ef, 0xbfcae147, 0xae147ac0},			/* 1.23352=f(-0.21000)*/
-{63, 0,123,__LINE__, 0x3ff39030, 0x97164bdf, 0xbfc99999, 0x99999978},			/* 1.22270=f(-0.20000)*/
-{63, 0,123,__LINE__, 0x3ff363b2, 0x3a0ce423, 0xbfc851eb, 0x851eb830},			/* 1.21184=f(-0.19000)*/
-{61, 0,123,__LINE__, 0x3ff33708, 0x7f92dfb4, 0xbfc70a3d, 0x70a3d6e8},			/* 1.20093=f(-0.18000)*/
-{63, 0,123,__LINE__, 0x3ff30a35, 0x88f592b1, 0xbfc5c28f, 0x5c28f5a0},			/* 1.18999=f(-0.17000)*/
-{63, 0,123,__LINE__, 0x3ff2dd3b, 0x7db4894d, 0xbfc47ae1, 0x47ae1458},			/* 1.17901=f(-0.16000)*/
-{62, 0,123,__LINE__, 0x3ff2b01c, 0x8b323e8e, 0xbfc33333, 0x33333310},			/* 1.16799=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3ff282da, 0xe46358d9, 0xbfc1eb85, 0x1eb851c8},			/* 1.15694=f(-0.14000)*/
-{61, 0,123,__LINE__, 0x3ff25578, 0xc17c7fbc, 0xbfc0a3d7, 0x0a3d7080},			/* 1.14586=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3ff227f8, 0x5f9edee1, 0xbfbeb851, 0xeb851e71},			/* 1.13475=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3ff1fa5c, 0x00836aa9, 0xbfbc28f5, 0xc28f5be2},			/* 1.12362=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3ff1cca5, 0xea24fb2e, 0xbfb99999, 0x99999953},			/* 1.11246=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3ff19ed8, 0x6669530b, 0xbfb70a3d, 0x70a3d6c4},			/* 1.10128=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3ff170f5, 0xc2c9277d, 0xbfb47ae1, 0x47ae1435},			/* 1.09007=f(-0.08000)*/
-{62, 0,123,__LINE__, 0x3ff14300, 0x4ff73fea, 0xbfb1eb85, 0x1eb851a6},			/* 1.07885=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3ff114fa, 0x6186c31a, 0xbfaeb851, 0xeb851e2d},			/* 1.06762=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3ff0e6e6, 0x4d90c8c9, 0xbfa99999, 0x9999990e},			/* 1.05637=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3ff0b8c6, 0x6c59466a, 0xbfa47ae1, 0x47ae13ef},			/* 1.04511=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3ff08a9d, 0x17f36e3d, 0xbf9eb851, 0xeb851da0},			/* 1.03384=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3ff05c6c, 0xabe5980a, 0xbf947ae1, 0x47ae1362},			/* 1.02256=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3ff02e37, 0x84cccaf2, 0xbf847ae1, 0x47ae1249},			/* 1.01128=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfffffff6, 0x3cd19000, 0x00000000},			/* 0.01000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3fefa390, 0xf6666a09, 0x3f847ae1, 0x47ae16ad},			/* 0.98871=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3fef4726, 0xa834cfd9, 0x3f947ae1, 0x47ae1594},			/* 0.97743=f(0.02000)*/
-{63, 0,123,__LINE__, 0x3feeeac5, 0xd0192372, 0x3f9eb851, 0xeb851fd2},			/* 0.96615=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fee8e73, 0x274d7319, 0x3fa47ae1, 0x47ae1508},			/* 0.95488=f(0.04000)*/
-{63, 0,123,__LINE__, 0x3fee3233, 0x64de6e5a, 0x3fa99999, 0x99999a27},			/* 0.94362=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3fedd60b, 0x3cf279b9, 0x3faeb851, 0xeb851f46},			/* 0.93237=f(0.06000)*/
-{62, 0,123,__LINE__, 0x3fed79ff, 0x60118019, 0x3fb1eb85, 0x1eb85232},			/* 0.92114=f(0.07000)*/
-{63, 0,123,__LINE__, 0x3fed1e14, 0x7a6db0f2, 0x3fb47ae1, 0x47ae14c1},			/* 0.90992=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fecc24f, 0x332d59d6, 0x3fb70a3d, 0x70a3d750},			/* 0.89871=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fec66b4, 0x2bb60990, 0x3fb99999, 0x999999df},			/* 0.88753=f(0.10000)*/
-{63, 0,123,__LINE__, 0x3fec0b47, 0xfef92a9a, 0x3fbc28f5, 0xc28f5c6e},			/* 0.87637=f(0.11000)*/
-{63, 0,123,__LINE__, 0x3febb00f, 0x40c2422a, 0x3fbeb851, 0xeb851efd},			/* 0.86524=f(0.12000)*/
-{62, 0,123,__LINE__, 0x3feb550e, 0x7d070075, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.85413=f(0.13000)*/
-{63, 0,123,__LINE__, 0x3feafa4a, 0x37394e3a, 0x3fc1eb85, 0x1eb8520e},			/* 0.84305=f(0.14000)*/
-{62, 0,123,__LINE__, 0x3fea9fc6, 0xe99b82d1, 0x3fc33333, 0x33333356},			/* 0.83200=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fea4589, 0x0496ed54, 0x3fc47ae1, 0x47ae149e},			/* 0.82098=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fe9eb94, 0xee14da8c, 0x3fc5c28f, 0x5c28f5e6},			/* 0.81000=f(0.17000)*/
-{63, 0,123,__LINE__, 0x3fe991ef, 0x00da4086, 0x3fc70a3d, 0x70a3d72e},			/* 0.79906=f(0.18000)*/
-{60, 0,123,__LINE__, 0x3fe9389b, 0x8be637a7, 0x3fc851eb, 0x851eb876},			/* 0.78816=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fe8df9e, 0xd1d36830, 0x3fc99999, 0x999999be},			/* 0.77729=f(0.20000)*/
-{63, 0,123,__LINE__, 0x3fe886fd, 0x083c9210, 0x3fcae147, 0xae147b06},			/* 0.76647=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fe82eba, 0x572453d0, 0x3fcc28f5, 0xc28f5c4e},			/* 0.75570=f(0.22000)*/
-{62, 0,123,__LINE__, 0x3fe7d6da, 0xd8605434, 0x3fcd70a3, 0xd70a3d96},			/* 0.74497=f(0.23000)*/
-{62, 0,123,__LINE__, 0x3fe77f62, 0x9707f125, 0x3fceb851, 0xeb851ede},			/* 0.73429=f(0.24000)*/
-{61, 0,123,__LINE__, 0x3fe72855, 0x8ee694f2, 0x3fd00000, 0x00000013},			/* 0.72367=f(0.25000)*/
-{62, 0,123,__LINE__, 0x3fe6d1b7, 0xabf1d221, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.71310=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fe67b8c, 0xc9c36450, 0x3fd147ae, 0x147ae15b},			/* 0.70258=f(0.27000)*/
-{62, 0,123,__LINE__, 0x3fe625d8, 0xb3173385, 0x3fd1eb85, 0x1eb851ff},			/* 0.69211=f(0.28000)*/
-{63, 0,123,__LINE__, 0x3fe5d09f, 0x214d7600, 0x3fd28f5c, 0x28f5c2a3},			/* 0.68171=f(0.29000)*/
-{59, 0,123,__LINE__, 0x3fe57be3, 0xbbf10aee, 0x3fd33333, 0x33333347},			/* 0.67137=f(0.30000)*/
-{62, 0,123,__LINE__, 0x3fe527aa, 0x18422750, 0x3fd3d70a, 0x3d70a3eb},			/* 0.66109=f(0.31000)*/
-{63, 0,123,__LINE__, 0x3fe4d3f5, 0xb8c56c8e, 0x3fd47ae1, 0x47ae148f},			/* 0.65087=f(0.32000)*/
-{60, 0,123,__LINE__, 0x3fe480ca, 0x0cd77f06, 0x3fd51eb8, 0x51eb8533},			/* 0.64072=f(0.33000)*/
-{62, 0,123,__LINE__, 0x3fe42e2a, 0x70453130, 0x3fd5c28f, 0x5c28f5d7},			/* 0.63063=f(0.34000)*/
-{61, 0,123,__LINE__, 0x3fe3dc1a, 0x2ae85672, 0x3fd66666, 0x6666667b},			/* 0.62061=f(0.35000)*/
-{62, 0,123,__LINE__, 0x3fe38a9c, 0x70494f49, 0x3fd70a3d, 0x70a3d71f},			/* 0.61067=f(0.36000)*/
-{57, 0,123,__LINE__, 0x3fe339b4, 0x5f455ebf, 0x3fd7ae14, 0x7ae147c3},			/* 0.60079=f(0.37000)*/
-{60, 0,123,__LINE__, 0x3fe2e965, 0x01b9d7a6, 0x3fd851eb, 0x851eb867},			/* 0.59099=f(0.38000)*/
-{59, 0,123,__LINE__, 0x3fe299b1, 0x4c342e6e, 0x3fd8f5c2, 0x8f5c290b},			/* 0.58126=f(0.39000)*/
-{62, 0,123,__LINE__, 0x3fe24a9c, 0x1da6faf4, 0x3fd99999, 0x999999af},			/* 0.57160=f(0.40000)*/
-{62, 0,123,__LINE__, 0x3fe1fc28, 0x3f23f3c5, 0x3fda3d70, 0xa3d70a53},			/* 0.56203=f(0.41000)*/
-{62, 0,123,__LINE__, 0x3fe1ae58, 0x639aeb30, 0x3fdae147, 0xae147af7},			/* 0.55253=f(0.42000)*/
-{62, 0,123,__LINE__, 0x3fe1612f, 0x279dd468, 0x3fdb851e, 0xb851eb9b},			/* 0.54311=f(0.43000)*/
-{60, 0,123,__LINE__, 0x3fe114af, 0x1129d5b6, 0x3fdc28f5, 0xc28f5c3f},			/* 0.53377=f(0.44000)*/
-{60, 0,123,__LINE__, 0x3fe0c8da, 0x8f756b16, 0x3fdccccc, 0xcccccce3},			/* 0.52451=f(0.45000)*/
-{62, 0,123,__LINE__, 0x3fe07db3, 0xfac39ae1, 0x3fdd70a3, 0xd70a3d87},			/* 0.51534=f(0.46000)*/
-{63, 0,123,__LINE__, 0x3fe0333d, 0x943c3cc1, 0x3fde147a, 0xe147ae2b},			/* 0.50625=f(0.47000)*/
-{59, 0,123,__LINE__, 0x3fdfd2f3, 0x0b92a332, 0x3fdeb851, 0xeb851ecf},			/* 0.49725=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fdf40d3, 0xc3f2d293, 0x3fdf5c28, 0xf5c28f73},			/* 0.48833=f(0.49000)*/
-{63, 0,123,__LINE__, 0x3fdeb021, 0x47ce2448, 0x3fe00000, 0x0000000b},			/* 0.47950=f(0.50000)*/
-{57, 0,123,__LINE__, 0x3fde20df, 0x5e4a97be, 0x3fe051eb, 0x851eb85d},			/* 0.47075=f(0.51000)*/
-{62, 0,123,__LINE__, 0x3fdd9311, 0x9f61ed9a, 0x3fe0a3d7, 0x0a3d70af},			/* 0.46210=f(0.52000)*/
-{57, 0,123,__LINE__, 0x3fdd06bb, 0x73ce6cbf, 0x3fe0f5c2, 0x8f5c2901},			/* 0.45353=f(0.53000)*/
-{60, 0,123,__LINE__, 0x3fdc7be0, 0x15017996, 0x3fe147ae, 0x147ae153},			/* 0.44506=f(0.54000)*/
-{60, 0,123,__LINE__, 0x3fdbf282, 0x8d23e7d6, 0x3fe19999, 0x999999a5},			/* 0.43667=f(0.55000)*/
-{62, 0,123,__LINE__, 0x3fdb6aa5, 0xb71fed2c, 0x3fe1eb85, 0x1eb851f7},			/* 0.42838=f(0.56000)*/
-{61, 0,123,__LINE__, 0x3fdae44c, 0x3eb497ac, 0x3fe23d70, 0xa3d70a49},			/* 0.42018=f(0.57000)*/
-{61, 0,123,__LINE__, 0x3fda5f78, 0xa092a8d5, 0x3fe28f5c, 0x28f5c29b},			/* 0.41207=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fd9dc2d, 0x2a82b31f, 0x3fe2e147, 0xae147aed},			/* 0.40406=f(0.59000)*/
-{63, 0,123,__LINE__, 0x3fd95a6b, 0xfb945602, 0x3fe33333, 0x3333333f},			/* 0.39614=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3fd8da37, 0x0456716b, 0x3fe3851e, 0xb851eb91},			/* 0.38831=f(0.61000)*/
-{62, 0,123,__LINE__, 0x3fd85b90, 0x071827f3, 0x3fe3d70a, 0x3d70a3e3},			/* 0.38058=f(0.62000)*/
-{62, 0,123,__LINE__, 0x3fd7de78, 0x9832845a, 0x3fe428f5, 0xc28f5c35},			/* 0.37295=f(0.63000)*/
-{62, 0,123,__LINE__, 0x3fd762f2, 0x1e5a952a, 0x3fe47ae1, 0x47ae1487},			/* 0.36541=f(0.64000)*/
-{62, 0,123,__LINE__, 0x3fd6e8fd, 0xd2fbcef6, 0x3fe4cccc, 0xccccccd9},			/* 0.35797=f(0.65000)*/
-{59, 0,123,__LINE__, 0x3fd6709c, 0xc29a8410, 0x3fe51eb8, 0x51eb852b},			/* 0.35062=f(0.66000)*/
-{63, 0,123,__LINE__, 0x3fd5f9cf, 0xcd3e3e74, 0x3fe570a3, 0xd70a3d7d},			/* 0.34337=f(0.67000)*/
-{63, 0,123,__LINE__, 0x3fd58497, 0xa6e3c703, 0x3fe5c28f, 0x5c28f5cf},			/* 0.33621=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fd510f4, 0xd7f6a38b, 0x3fe6147a, 0xe147ae21},			/* 0.32915=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fd49ee7, 0xbdd1d361, 0x3fe66666, 0x66666673},			/* 0.32219=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fd42e70, 0x8b479106, 0x3fe6b851, 0xeb851ec5},			/* 0.31533=f(0.71000)*/
-{60, 0,123,__LINE__, 0x3fd3bf8f, 0x492fdde7, 0x3fe70a3d, 0x70a3d717},			/* 0.30856=f(0.72000)*/
-{63, 0,123,__LINE__, 0x3fd35243, 0xd6fd9be0, 0x3fe75c28, 0xf5c28f69},			/* 0.30189=f(0.73000)*/
-{62, 0,123,__LINE__, 0x3fd2e68d, 0xeb59f755, 0x3fe7ae14, 0x7ae147bb},			/* 0.29532=f(0.74000)*/
-{63, 0,123,__LINE__, 0x3fd27c6d, 0x14c5e332, 0x3fe80000, 0x0000000d},			/* 0.28884=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fd213e0, 0xba416795, 0x3fe851eb, 0x851eb85f},			/* 0.28246=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fd1ace8, 0x1bf882e0, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.27617=f(0.77000)*/
-{63, 0,123,__LINE__, 0x3fd14782, 0x53f55c14, 0x3fe8f5c2, 0x8f5c2903},			/* 0.26998=f(0.78000)*/
-{63, 0,123,__LINE__, 0x3fd0e3ae, 0x56d784d2, 0x3fe947ae, 0x147ae155},			/* 0.26389=f(0.79000)*/
-{63, 0,123,__LINE__, 0x3fd0816a, 0xf49008ea, 0x3fe99999, 0x999999a7},			/* 0.25789=f(0.80000)*/
-{63, 0,123,__LINE__, 0x3fd020b6, 0xd92208ab, 0x3fe9eb85, 0x1eb851f9},			/* 0.25199=f(0.81000)*/
-{60, 0,123,__LINE__, 0x3fcf8321, 0x1acf35c9, 0x3fea3d70, 0xa3d70a4b},			/* 0.24618=f(0.82000)*/
-{61, 0,123,__LINE__, 0x3fcec7ec, 0xefb56713, 0x3fea8f5c, 0x28f5c29d},			/* 0.24047=f(0.83000)*/
-{56, 0,123,__LINE__, 0x3fce0fcd, 0xbac3967c, 0x3feae147, 0xae147aef},			/* 0.23485=f(0.84000)*/
-{62, 0,123,__LINE__, 0x3fcd5abf, 0xc440091d, 0x3feb3333, 0x33333341},			/* 0.22933=f(0.85000)*/
-{62, 0,123,__LINE__, 0x3fcca8bf, 0x14911664, 0x3feb851e, 0xb851eb93},			/* 0.22389=f(0.86000)*/
-{59, 0,123,__LINE__, 0x3fcbf9c7, 0x75e9d42f, 0x3febd70a, 0x3d70a3e5},			/* 0.21856=f(0.87000)*/
-{61, 0,123,__LINE__, 0x3fcb4dd4, 0x75fc2a5a, 0x3fec28f5, 0xc28f5c37},			/* 0.21331=f(0.88000)*/
-{61, 0,123,__LINE__, 0x3fcaa4e1, 0x67afc7b9, 0x3fec7ae1, 0x47ae1489},			/* 0.20815=f(0.89000)*/
-{59, 0,123,__LINE__, 0x3fc9fee9, 0x64dd744c, 0x3feccccc, 0xccccccdb},			/* 0.20309=f(0.90000)*/
-{61, 0,123,__LINE__, 0x3fc95be7, 0x500e3c39, 0x3fed1eb8, 0x51eb852d},			/* 0.19811=f(0.91000)*/
-{60, 0,123,__LINE__, 0x3fc8bbd5, 0xd63df146, 0x3fed70a3, 0xd70a3d7f},			/* 0.19323=f(0.92000)*/
-{63, 0,123,__LINE__, 0x3fc81eaf, 0x70a08124, 0x3fedc28f, 0x5c28f5d1},			/* 0.18843=f(0.93000)*/
-{62, 0,123,__LINE__, 0x3fc6ed0c, 0xce964d27, 0x3fee6666, 0x66666675},			/* 0.17910=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fc65884, 0x91b7a8b1, 0x3feeb851, 0xeb851ec7},			/* 0.17457=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fc5c6cf, 0x6bbeb416, 0x3fef0a3d, 0x70a3d719},			/* 0.17012=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fc537e6, 0xedc87024, 0x3fef5c28, 0xf5c28f6b},			/* 0.16576=f(0.98000)*/
-{62, 0,123,__LINE__, 0x3fc4abc4, 0x7fe9ee7f, 0x3fefae14, 0x7ae147bd},			/* 0.16149=f(0.99000)*/
-{63, 0,123,__LINE__, 0x3fc42261, 0x62fbddbf, 0x3ff00000, 0x00000007},			/* 0.15729=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fc39bb6, 0xb2651f4b, 0x3ff028f5, 0xc28f5c30},			/* 0.15318=f(1.01000)*/
-{62, 0,123,__LINE__, 0x3fc317bd, 0x65e3f73a, 0x3ff051eb, 0x851eb859},			/* 0.14916=f(1.02000)*/
-{63, 0,123,__LINE__, 0x3fc2966e, 0x5355697a, 0x3ff07ae1, 0x47ae1482},			/* 0.14521=f(1.03000)*/
-{63, 0,123,__LINE__, 0x3fc217c2, 0x307a5a4c, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.14135=f(1.04000)*/
-{62, 0,123,__LINE__, 0x3fc19bb1, 0x94ba0a82, 0x3ff0cccc, 0xccccccd4},			/* 0.13756=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fc12234, 0xfae18b5c, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.13385=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fc0ab44, 0xc2dfc867, 0x3ff11eb8, 0x51eb8526},			/* 0.13022=f(1.07000)*/
-{62, 0,123,__LINE__, 0x3fc036d9, 0x337dc8fa, 0x3ff147ae, 0x147ae14f},			/* 0.12667=f(1.08000)*/
-{61, 0,123,__LINE__, 0x3fbf89d4, 0xf8259c51, 0x3ff170a3, 0xd70a3d78},			/* 0.12319=f(1.09000)*/
-{63, 0,123,__LINE__, 0x3fbeaae1, 0x6c67e9dc, 0x3ff19999, 0x999999a1},			/* 0.11979=f(1.10000)*/
-{62, 0,123,__LINE__, 0x3fbdd0c7, 0xcebe0f58, 0x3ff1c28f, 0x5c28f5ca},			/* 0.11646=f(1.11000)*/
-{62, 0,123,__LINE__, 0x3fbcfb78, 0x05405b04, 0x3ff1eb85, 0x1eb851f3},			/* 0.11321=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fbc2ae1, 0xd4645220, 0x3ff2147a, 0xe147ae1c},			/* 0.11002=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fbb5ef4, 0xe231b77c, 0x3ff23d70, 0xa3d70a45},			/* 0.10691=f(1.14000)*/
-{60, 0,123,__LINE__, 0x3fba97a0, 0xb96b8c26, 0x3ff26666, 0x6666666e},			/* 0.10387=f(1.15000)*/
-{63, 0,123,__LINE__, 0x3fb9d4d4, 0xccac81ae, 0x3ff28f5c, 0x28f5c297},			/* 0.10090=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fb91680, 0x79765cb4, 0x3ff2b851, 0xeb851ec0},			/* 0.09799=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fb85c93, 0x0b33cd4e, 0x3ff2e147, 0xae147ae9},			/* 0.09516=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fb7a6fb, 0xbe2c4968, 0x3ff30a3d, 0x70a3d712},			/* 0.09239=f(1.19000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 2.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x3fffffff, 0xfffa2ce1, 0xc012d97c, 0x7f3321d2},			/* 2.00000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0x3ffffff6, 0xb153ddbe, 0xc00921fb, 0x54442d18},			/* 1.99999=f(-3.14159)*/
-{64, 0,123,__LINE__, 0x3fff9430, 0x5a403fb6, 0xbff921fb, 0x54442d18},			/* 1.97367=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3f9af3e9, 0x6ff0126c, 0x3ff921fb, 0x54442d18},			/* 0.02632=f(1.57079)*/
-{63, 0,123,__LINE__, 0x3ee29d58, 0x448397f1, 0x400921fb, 0x54442d18},			/* 8.87615e-06=f(3.14159)*/
-{62, 0,123,__LINE__, 0x3dd74c7b, 0x3db71849, 0x4012d97c, 0x7f3321d2},			/* 8.47604e-11=f(4.71238)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03e0000, 0x00000000},			/* 2.00000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 2.00000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 2.00000=f(-26.6000)*/
-{61,16, 40,__LINE__, 0x3fe601fc, 0x1423144c, 0xc038e666, 0x66666667},			/* 0.68774=f(-24.9000)*/
-{59,16, 40,__LINE__, 0xbfe797a0, 0x53c06fe8, 0xc0373333, 0x33333334},			/* -0.73725=f(-23.2000)*/
-{62,16, 40,__LINE__, 0xc00a31d4, 0x6dd4dcec, 0xc0358000, 0x00000001},			/* -3.27433=f(-21.5000)*/
-{64,16, 40,__LINE__, 0x3ff35131, 0x0f12956a, 0xc033cccc, 0xccccccce},			/* 1.20732=f(-19.8000)*/
-{59,16, 40,__LINE__, 0x3fd8b315, 0xe379ef54, 0xc0321999, 0x9999999b},			/* 0.38593=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0306666, 0x66666668},			/* 2.00000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 2.00000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc02a0000, 0x00000004},			/* 2.00000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0269999, 0x9999999e},			/* 2.00000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0233333, 0x33333338},			/* 2.00000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 2.00000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 2.00000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x3fffffff, 0xffd4deb5, 0xc0120000, 0x00000009},			/* 2.00000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x3fffffb1, 0x57cc83a9, 0xc0066666, 0x66666678},			/* 1.99992=f(-2.80000)*/
-{61, 0,123,__LINE__, 0x3ffe1551, 0xe939816c, 0xbff19999, 0x999999bd},			/* 1.88020=f(-1.10000)*/
-{61, 0,123,__LINE__, 0x3fd95a6b, 0xfb945684, 0x3fe33333, 0x333332ec},			/* 0.39614=f(0.60000)*/
-{62, 0,123,__LINE__, 0x3f52bad4, 0x86594933, 0x40026666, 0x66666654},			/* 0.00114=f(2.30000)*/
-{62, 0,123,__LINE__, 0x3e508ddd, 0x13bd371c, 0x400fffff, 0xffffffee},			/* 1.54173e-08=f(4.00000)*/
-{61, 0,123,__LINE__, 0x3ce5a0d4, 0xb8764efa, 0x4016cccc, 0xccccccc4},			/* 2.40122e-15=f(5.70000)*/
-{61, 0,123,__LINE__, 0x3ade87aa, 0xf374c673, 0x401d9999, 0x99999991},			/* 3.94590e-25=f(7.40000)*/
-{63, 0,123,__LINE__, 0x3851f882, 0xfeb0e04c, 0x40223333, 0x3333332f},			/* 2.11245e-37=f(9.10000)*/
-{62, 0,123,__LINE__, 0x3541538a, 0x38316705, 0x40259999, 0x99999995},			/* 3.61791e-52=f(10.8000)*/
-{61, 0,123,__LINE__, 0x31ab1557, 0xbfbe624a, 0x4028ffff, 0xfffffffb},			/* 1.96207e-69=f(12.5000)*/
-{62, 0,123,__LINE__, 0x2d910d03, 0x4c705f74, 0x402c6666, 0x66666661},			/* 3.34817e-89=f(14.2000)*/
-{64, 0,123,__LINE__, 0x28f138c2, 0x2bf29f02, 0x402fcccc, 0xccccccc7},			/* 1.79027e-111=f(15.9000)*/
-{63,16, 40,__LINE__, 0x3ffb92a8, 0x2d5be8da, 0x40319999, 0x99999997},			/* 1.72330=f(17.6000)*/
-{60,16, 40,__LINE__, 0x3feb5b41, 0xd2d93677, 0x40334ccc, 0xccccccca},			/* 0.85488=f(19.3000)*/
-{63,16, 40,__LINE__, 0x3fd921e0, 0x92659a6a, 0x4034ffff, 0xfffffffd},			/* 0.39269=f(21.0000)*/
-{60,16, 40,__LINE__, 0x4006a960, 0x1f96f977, 0x4036b333, 0x33333330},			/* 2.83270=f(22.7000)*/
-{62,16, 40,__LINE__, 0x3ff5f7f2, 0xf38e10e8, 0x40386666, 0x66666663},			/* 1.37303=f(24.4000)*/
-{60,16, 40,__LINE__, 0x3fe3a9a4, 0x7bd5be27, 0x403a1999, 0x99999996},			/* 0.61445=f(26.1000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 0.00000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 0.00000=f(29.5000)*/
-0,};
-test_erfc(m)   {run_vector_1(m,erfc_vec,(char *)(erfc),"erfc","dd");   }	
diff --git a/newlib/libm/test/erfcf_vec.c b/newlib/libm/test/erfcf_vec.c
deleted file mode 100644
index 338321af9..000000000
--- a/newlib/libm/test/erfcf_vec.c
+++ /dev/null
@@ -1,286 +0,0 @@
-#include "test.h"
- one_line_type erfcf_vec[] = {
-{16, 0,123,__LINE__, 0x3ffe90a5, 0x60000000, 0xbff33333, 0x33333333},			/* 1.91031=f(-1.20000)*/
-{16, 0,123,__LINE__, 0x3ffe8590, 0x40000000, 0xbff30a3d, 0x70a3d70a},			/* 1.90760=f(-1.19000)*/
-{17, 0,123,__LINE__, 0x3ffe7a36, 0xc0000000, 0xbff2e147, 0xae147ae1},			/* 1.90483=f(-1.18000)*/
-{17, 0,123,__LINE__, 0x3ffe6e98, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 1.90200=f(-1.17000)*/
-{17, 0,123,__LINE__, 0x3ffe62b2, 0xc0000000, 0xbff28f5c, 0x28f5c28f},			/* 1.89909=f(-1.16000)*/
-{17, 0,123,__LINE__, 0x3ffe5686, 0x00000000, 0xbff26666, 0x66666666},			/* 1.89612=f(-1.15000)*/
-{17, 0,123,__LINE__, 0x3ffe4a10, 0xc0000000, 0xbff23d70, 0xa3d70a3d},			/* 1.89308=f(-1.14000)*/
-{18, 0,123,__LINE__, 0x3ffe3d51, 0xe0000000, 0xbff2147a, 0xe147ae14},			/* 1.88997=f(-1.13000)*/
-{18, 0,123,__LINE__, 0x3ffe3048, 0x80000000, 0xbff1eb85, 0x1eb851eb},			/* 1.88678=f(-1.12000)*/
-{18, 0,123,__LINE__, 0x3ffe22f3, 0x80000000, 0xbff1c28f, 0x5c28f5c2},			/* 1.88353=f(-1.11000)*/
-{19, 0,123,__LINE__, 0x3ffe1551, 0xe0000000, 0xbff19999, 0x99999999},			/* 1.88020=f(-1.10000)*/
-{24, 0,123,__LINE__, 0x3ffe0762, 0xc0000000, 0xbff170a3, 0xd70a3d70},			/* 1.87680=f(-1.09000)*/
-{14, 0,123,__LINE__, 0x3ffdf924, 0xe0000000, 0xbff147ae, 0x147ae147},			/* 1.87332=f(-1.08000)*/
-{14, 0,123,__LINE__, 0x3ffdea97, 0x60000000, 0xbff11eb8, 0x51eb851e},			/* 1.86977=f(-1.07000)*/
-{14, 0,123,__LINE__, 0x3ffddbb9, 0x60000000, 0xbff0f5c2, 0x8f5c28f5},			/* 1.86614=f(-1.06000)*/
-{14, 0,123,__LINE__, 0x3ffdcc89, 0xc0000000, 0xbff0cccc, 0xcccccccc},			/* 1.86243=f(-1.05000)*/
-{14, 0,123,__LINE__, 0x3ffdbd07, 0xc0000000, 0xbff0a3d7, 0x0a3d70a3},			/* 1.85865=f(-1.04000)*/
-{14, 0,123,__LINE__, 0x3ffdad32, 0x40000000, 0xbff07ae1, 0x47ae147a},			/* 1.85478=f(-1.03000)*/
-{14, 0,123,__LINE__, 0x3ffd9d08, 0x40000000, 0xbff051eb, 0x851eb851},			/* 1.85083=f(-1.02000)*/
-{14, 0,123,__LINE__, 0x3ffd8c89, 0x20000000, 0xbff028f5, 0xc28f5c28},			/* 1.84681=f(-1.01000)*/
-{14, 0,123,__LINE__, 0x3ffd7bb3, 0xc0000000, 0xbfefffff, 0xfffffffe},			/* 1.84270=f(-0.01000)*/
-{14, 0,123,__LINE__, 0x3ffd6a87, 0x80000000, 0xbfefae14, 0x7ae147ac},			/* 1.83850=f(-0.99000)*/
-{14, 0,123,__LINE__, 0x3ffd5903, 0x20000000, 0xbfef5c28, 0xf5c28f5a},			/* 1.83423=f(-0.98000)*/
-{14, 0,123,__LINE__, 0x3ffd4726, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 1.82987=f(-0.97000)*/
-{14, 0,123,__LINE__, 0x3ffd34ef, 0x60000000, 0xbfeeb851, 0xeb851eb6},			/* 1.82542=f(-0.96000)*/
-{14, 0,123,__LINE__, 0x3ffd225e, 0x60000000, 0xbfee6666, 0x66666664},			/* 1.82089=f(-0.95000)*/
-{14, 0,123,__LINE__, 0x3ffcfc2a, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 1.81156=f(-0.93000)*/
-{14, 0,123,__LINE__, 0x3ffce885, 0x40000000, 0xbfed70a3, 0xd70a3d6e},			/* 1.80676=f(-0.92000)*/
-{14, 0,123,__LINE__, 0x3ffcd483, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 1.80188=f(-0.91000)*/
-{14, 0,123,__LINE__, 0x3ffcc022, 0xc0000000, 0xbfeccccc, 0xccccccca},			/* 1.79690=f(-0.90000)*/
-{14, 0,123,__LINE__, 0x3ffcab63, 0xc0000000, 0xbfec7ae1, 0x47ae1478},			/* 1.79184=f(-0.89000)*/
-{14, 0,123,__LINE__, 0x3ffc9645, 0x60000000, 0xbfec28f5, 0xc28f5c26},			/* 1.78668=f(-0.88000)*/
-{14, 0,123,__LINE__, 0x3ffc80c7, 0x20000000, 0xbfebd70a, 0x3d70a3d4},			/* 1.78144=f(-0.87000)*/
-{14, 0,123,__LINE__, 0x3ffc6ae8, 0x20000000, 0xbfeb851e, 0xb851eb82},			/* 1.77610=f(-0.86000)*/
-{14, 0,123,__LINE__, 0x3ffc54a8, 0x00000000, 0xbfeb3333, 0x33333330},			/* 1.77066=f(-0.85000)*/
-{14, 0,123,__LINE__, 0x3ffc3e06, 0x40000000, 0xbfeae147, 0xae147ade},			/* 1.76514=f(-0.84000)*/
-{14, 0,123,__LINE__, 0x3ffc2702, 0x60000000, 0xbfea8f5c, 0x28f5c28c},			/* 1.75952=f(-0.83000)*/
-{14, 0,123,__LINE__, 0x3ffc0f9b, 0xe0000000, 0xbfea3d70, 0xa3d70a3a},			/* 1.75381=f(-0.82000)*/
-{13, 0,123,__LINE__, 0x3ffbf7d2, 0x40000000, 0xbfe9eb85, 0x1eb851e8},			/* 1.74800=f(-0.81000)*/
-{13, 0,123,__LINE__, 0x3ffbdfa5, 0x40000000, 0xbfe99999, 0x99999996},			/* 1.74210=f(-0.80000)*/
-{13, 0,123,__LINE__, 0x3ffbc714, 0x80000000, 0xbfe947ae, 0x147ae144},			/* 1.73610=f(-0.79000)*/
-{13, 0,123,__LINE__, 0x3ffbae1f, 0x60000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 1.73001=f(-0.78000)*/
-{13, 0,123,__LINE__, 0x3ffb94c6, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 1.72382=f(-0.77000)*/
-{13, 0,123,__LINE__, 0x3ffb7b07, 0xe0000000, 0xbfe851eb, 0x851eb84e},			/* 1.71753=f(-0.76000)*/
-{13, 0,123,__LINE__, 0x3ffb60e4, 0xc0000000, 0xbfe7ffff, 0xfffffffc},			/* 1.71115=f(-0.75000)*/
-{13, 0,123,__LINE__, 0x3ffb465c, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* 1.70467=f(-0.74000)*/
-{13, 0,123,__LINE__, 0x3ffb2b6f, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 1.69810=f(-0.73000)*/
-{13, 0,123,__LINE__, 0x3ffb101c, 0x40000000, 0xbfe70a3d, 0x70a3d706},			/* 1.69143=f(-0.72000)*/
-{13, 0,123,__LINE__, 0x3ffaf463, 0xe0000000, 0xbfe6b851, 0xeb851eb4},			/* 1.68466=f(-0.71000)*/
-{13, 0,123,__LINE__, 0x3ffad846, 0x00000000, 0xbfe66666, 0x66666662},			/* 1.67780=f(-0.70000)*/
-{13, 0,123,__LINE__, 0x3ffabbc2, 0xc0000000, 0xbfe6147a, 0xe147ae10},			/* 1.67084=f(-0.69000)*/
-{13, 0,123,__LINE__, 0x3ffa9eda, 0x20000000, 0xbfe5c28f, 0x5c28f5be},			/* 1.66378=f(-0.68000)*/
-{13, 0,123,__LINE__, 0x3ffa818c, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 1.65662=f(-0.67000)*/
-{13, 0,123,__LINE__, 0x3ffa63d8, 0xc0000000, 0xbfe51eb8, 0x51eb851a},			/* 1.64937=f(-0.66000)*/
-{13, 0,123,__LINE__, 0x3ffa45c0, 0x80000000, 0xbfe4cccc, 0xccccccc8},			/* 1.64202=f(-0.65000)*/
-{13, 0,123,__LINE__, 0x3ffa2743, 0x80000000, 0xbfe47ae1, 0x47ae1476},			/* 1.63458=f(-0.64000)*/
-{13, 0,123,__LINE__, 0x3ffa0861, 0xc0000000, 0xbfe428f5, 0xc28f5c24},			/* 1.62704=f(-0.63000)*/
-{13, 0,123,__LINE__, 0x3ff9e91c, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 1.61941=f(-0.62000)*/
-{13, 0,123,__LINE__, 0x3ff9c972, 0x40000000, 0xbfe3851e, 0xb851eb80},			/* 1.61168=f(-0.61000)*/
-{13, 0,123,__LINE__, 0x3ff9a965, 0x00000000, 0xbfe33333, 0x3333332e},			/* 1.60385=f(-0.60000)*/
-{13, 0,123,__LINE__, 0x3ff988f4, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* 1.59593=f(-0.59000)*/
-{13, 0,123,__LINE__, 0x3ff96821, 0xc0000000, 0xbfe28f5c, 0x28f5c28a},			/* 1.58792=f(-0.58000)*/
-{13, 0,123,__LINE__, 0x3ff946ed, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 1.57981=f(-0.57000)*/
-{13, 0,123,__LINE__, 0x3ff92556, 0x80000000, 0xbfe1eb85, 0x1eb851e6},			/* 1.57161=f(-0.56000)*/
-{13, 0,123,__LINE__, 0x3ff9035f, 0x60000000, 0xbfe19999, 0x99999994},			/* 1.56332=f(-0.55000)*/
-{13, 0,123,__LINE__, 0x3ff8e108, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 1.55493=f(-0.54000)*/
-{13, 0,123,__LINE__, 0x3ff8be51, 0x20000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 1.54646=f(-0.53000)*/
-{13, 0,123,__LINE__, 0x3ff89b3b, 0x80000000, 0xbfe0a3d7, 0x0a3d709e},			/* 1.53789=f(-0.52000)*/
-{13, 0,123,__LINE__, 0x3ff877c8, 0x20000000, 0xbfe051eb, 0x851eb84c},			/* 1.52924=f(-0.51000)*/
-{13, 0,123,__LINE__, 0x3ff853f7, 0xc0000000, 0xbfdfffff, 0xfffffff4},			/* 1.52050=f(-0.50000)*/
-{13, 0,123,__LINE__, 0x3ff82fcb, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 1.51166=f(-0.49000)*/
-{13, 0,123,__LINE__, 0x3ff80b43, 0x40000000, 0xbfdeb851, 0xeb851eac},			/* 1.50275=f(-0.48000)*/
-{12, 0,123,__LINE__, 0x3ff7e661, 0x40000000, 0xbfde147a, 0xe147ae08},			/* 1.49374=f(-0.47000)*/
-{12, 0,123,__LINE__, 0x3ff7c126, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 1.48465=f(-0.46000)*/
-{12, 0,123,__LINE__, 0x3ff79b92, 0xc0000000, 0xbfdccccc, 0xccccccc0},			/* 1.47548=f(-0.45000)*/
-{12, 0,123,__LINE__, 0x3ff775a8, 0x80000000, 0xbfdc28f5, 0xc28f5c1c},			/* 1.46622=f(-0.44000)*/
-{12, 0,123,__LINE__, 0x3ff74f68, 0x80000000, 0xbfdb851e, 0xb851eb78},			/* 1.45688=f(-0.43000)*/
-{12, 0,123,__LINE__, 0x3ff728d3, 0xc0000000, 0xbfdae147, 0xae147ad4},			/* 1.44746=f(-0.42000)*/
-{12, 0,123,__LINE__, 0x3ff701eb, 0xe0000000, 0xbfda3d70, 0xa3d70a30},			/* 1.43796=f(-0.41000)*/
-{12, 0,123,__LINE__, 0x3ff6dab2, 0x00000000, 0xbfd99999, 0x9999998c},			/* 1.42839=f(-0.40000)*/
-{12, 0,123,__LINE__, 0x3ff6b327, 0x60000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 1.41873=f(-0.39000)*/
-{12, 0,123,__LINE__, 0x3ff68b4d, 0x80000000, 0xbfd851eb, 0x851eb844},			/* 1.40900=f(-0.38000)*/
-{12, 0,123,__LINE__, 0x3ff66325, 0xc0000000, 0xbfd7ae14, 0x7ae147a0},			/* 1.39920=f(-0.37000)*/
-{12, 0,123,__LINE__, 0x3ff63ab1, 0xc0000000, 0xbfd70a3d, 0x70a3d6fc},			/* 1.38933=f(-0.36000)*/
-{12, 0,123,__LINE__, 0x3ff611f2, 0xe0000000, 0xbfd66666, 0x66666658},			/* 1.37938=f(-0.35000)*/
-{12, 0,123,__LINE__, 0x3ff5e8ea, 0xc0000000, 0xbfd5c28f, 0x5c28f5b4},			/* 1.36936=f(-0.34000)*/
-{12, 0,123,__LINE__, 0x3ff5bf9b, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 1.35927=f(-0.33000)*/
-{12, 0,123,__LINE__, 0x3ff59605, 0x20000000, 0xbfd47ae1, 0x47ae146c},			/* 1.34912=f(-0.32000)*/
-{12, 0,123,__LINE__, 0x3ff56c2b, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 1.33890=f(-0.31000)*/
-{12, 0,123,__LINE__, 0x3ff5420e, 0x20000000, 0xbfd33333, 0x33333324},			/* 1.32862=f(-0.30000)*/
-{12, 0,123,__LINE__, 0x3ff517b0, 0x80000000, 0xbfd28f5c, 0x28f5c280},			/* 1.31828=f(-0.29000)*/
-{12, 0,123,__LINE__, 0x3ff4ed13, 0xa0000000, 0xbfd1eb85, 0x1eb851dc},			/* 1.30788=f(-0.28000)*/
-{12, 0,123,__LINE__, 0x3ff4c239, 0xa0000000, 0xbfd147ae, 0x147ae138},			/* 1.29741=f(-0.27000)*/
-{12, 0,123,__LINE__, 0x3ff49724, 0x20000000, 0xbfd0a3d7, 0x0a3d7094},			/* 1.28690=f(-0.26000)*/
-{12, 0,123,__LINE__, 0x3ff46bd5, 0x40000000, 0xbfcfffff, 0xffffffe0},			/* 1.27632=f(-0.25000)*/
-{12, 0,123,__LINE__, 0x3ff4404e, 0xc0000000, 0xbfceb851, 0xeb851e98},			/* 1.26570=f(-0.24000)*/
-{12, 0,123,__LINE__, 0x3ff41492, 0xa0000000, 0xbfcd70a3, 0xd70a3d50},			/* 1.25502=f(-0.23000)*/
-{12, 0,123,__LINE__, 0x3ff3e8a2, 0xe0000000, 0xbfcc28f5, 0xc28f5c08},			/* 1.24429=f(-0.22000)*/
-{12, 0,123,__LINE__, 0x3ff3bc81, 0x80000000, 0xbfcae147, 0xae147ac0},			/* 1.23352=f(-0.21000)*/
-{12, 0,123,__LINE__, 0x3ff39030, 0xa0000000, 0xbfc99999, 0x99999978},			/* 1.22270=f(-0.20000)*/
-{12, 0,123,__LINE__, 0x3ff363b2, 0x40000000, 0xbfc851eb, 0x851eb830},			/* 1.21184=f(-0.19000)*/
-{12, 0,123,__LINE__, 0x3ff33708, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* 1.20093=f(-0.18000)*/
-{12, 0,123,__LINE__, 0x3ff30a35, 0x80000000, 0xbfc5c28f, 0x5c28f5a0},			/* 1.18999=f(-0.17000)*/
-{12, 0,123,__LINE__, 0x3ff2dd3b, 0x80000000, 0xbfc47ae1, 0x47ae1458},			/* 1.17901=f(-0.16000)*/
-{12, 0,123,__LINE__, 0x3ff2b01c, 0x80000000, 0xbfc33333, 0x33333310},			/* 1.16799=f(-0.15000)*/
-{12, 0,123,__LINE__, 0x3ff282da, 0xe0000000, 0xbfc1eb85, 0x1eb851c8},			/* 1.15694=f(-0.14000)*/
-{12, 0,123,__LINE__, 0x3ff25578, 0xc0000000, 0xbfc0a3d7, 0x0a3d7080},			/* 1.14586=f(-0.13000)*/
-{12, 0,123,__LINE__, 0x3ff227f8, 0x60000000, 0xbfbeb851, 0xeb851e71},			/* 1.13475=f(-0.12000)*/
-{12, 0,123,__LINE__, 0x3ff1fa5c, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 1.12362=f(-0.11000)*/
-{12, 0,123,__LINE__, 0x3ff1cca5, 0xe0000000, 0xbfb99999, 0x99999953},			/* 1.11246=f(-0.00100)*/
-{12, 0,123,__LINE__, 0x3ff19ed8, 0x60000000, 0xbfb70a3d, 0x70a3d6c4},			/* 1.10128=f(-0.09000)*/
-{12, 0,123,__LINE__, 0x3ff170f5, 0xc0000000, 0xbfb47ae1, 0x47ae1435},			/* 1.09007=f(-0.08000)*/
-{12, 0,123,__LINE__, 0x3ff14300, 0x40000000, 0xbfb1eb85, 0x1eb851a6},			/* 1.07885=f(-0.07000)*/
-{12, 0,123,__LINE__, 0x3ff114fa, 0x60000000, 0xbfaeb851, 0xeb851e2d},			/* 1.06762=f(-0.06000)*/
-{12, 0,123,__LINE__, 0x3ff0e6e6, 0x40000000, 0xbfa99999, 0x9999990e},			/* 1.05637=f(-0.05000)*/
-{12, 0,123,__LINE__, 0x3ff0b8c6, 0x60000000, 0xbfa47ae1, 0x47ae13ef},			/* 1.04511=f(-0.04000)*/
-{12, 0,123,__LINE__, 0x3ff08a9d, 0x20000000, 0xbf9eb851, 0xeb851da0},			/* 1.03384=f(-0.03000)*/
-{12, 0,123,__LINE__, 0x3ff05c6c, 0xa0000000, 0xbf947ae1, 0x47ae1362},			/* 1.02256=f(-0.02000)*/
-{12, 0,123,__LINE__, 0x3ff02e37, 0x80000000, 0xbf847ae1, 0x47ae1249},			/* 1.01128=f(-0.00010)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{11, 0,123,__LINE__, 0x3fefa391, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 0.98871=f(0.01000)*/
-{11, 0,123,__LINE__, 0x3fef4726, 0xa0000000, 0x3f947ae1, 0x47ae1594},			/* 0.97743=f(0.02000)*/
-{11, 0,123,__LINE__, 0x3feeeac5, 0xc0000000, 0x3f9eb851, 0xeb851fd2},			/* 0.96615=f(0.03000)*/
-{11, 0,123,__LINE__, 0x3fee8e73, 0x20000000, 0x3fa47ae1, 0x47ae1508},			/* 0.95488=f(0.04000)*/
-{11, 0,123,__LINE__, 0x3fee3233, 0x60000000, 0x3fa99999, 0x99999a27},			/* 0.94362=f(0.05000)*/
-{11, 0,123,__LINE__, 0x3fedd60b, 0x40000000, 0x3faeb851, 0xeb851f46},			/* 0.93237=f(0.06000)*/
-{11, 0,123,__LINE__, 0x3fed79ff, 0x60000000, 0x3fb1eb85, 0x1eb85232},			/* 0.92114=f(0.07000)*/
-{11, 0,123,__LINE__, 0x3fed1e14, 0x80000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.90992=f(0.08000)*/
-{11, 0,123,__LINE__, 0x3fecc24f, 0x40000000, 0x3fb70a3d, 0x70a3d750},			/* 0.89871=f(0.09000)*/
-{11, 0,123,__LINE__, 0x3fec66b4, 0x20000000, 0x3fb99999, 0x999999df},			/* 0.88753=f(0.10000)*/
-{11, 0,123,__LINE__, 0x3fec0b48, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.87637=f(0.11000)*/
-{11, 0,123,__LINE__, 0x3febb00f, 0x40000000, 0x3fbeb851, 0xeb851efd},			/* 0.86524=f(0.12000)*/
-{11, 0,123,__LINE__, 0x3feb550e, 0x80000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.85413=f(0.13000)*/
-{11, 0,123,__LINE__, 0x3feafa4a, 0x40000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.84305=f(0.14000)*/
-{11, 0,123,__LINE__, 0x3fea9fc6, 0xe0000000, 0x3fc33333, 0x33333356},			/* 0.83200=f(0.15000)*/
-{11, 0,123,__LINE__, 0x3fea4589, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 0.82098=f(0.16000)*/
-{11, 0,123,__LINE__, 0x3fe9eb95, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.81000=f(0.17000)*/
-{11, 0,123,__LINE__, 0x3fe991ef, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.79906=f(0.18000)*/
-{11, 0,123,__LINE__, 0x3fe9389b, 0x80000000, 0x3fc851eb, 0x851eb876},			/* 0.78816=f(0.19000)*/
-{11, 0,123,__LINE__, 0x3fe8df9e, 0xc0000000, 0x3fc99999, 0x999999be},			/* 0.77729=f(0.20000)*/
-{11, 0,123,__LINE__, 0x3fe886fd, 0x00000000, 0x3fcae147, 0xae147b06},			/* 0.76647=f(0.21000)*/
-{11, 0,123,__LINE__, 0x3fe82eba, 0x60000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.75570=f(0.22000)*/
-{11, 0,123,__LINE__, 0x3fe7d6da, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.74497=f(0.23000)*/
-{11, 0,123,__LINE__, 0x3fe77f62, 0xa0000000, 0x3fceb851, 0xeb851ede},			/* 0.73429=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fe72855, 0x80000000, 0x3fd00000, 0x00000013},			/* 0.72367=f(0.25000)*/
-{11, 0,123,__LINE__, 0x3fe6d1b7, 0xc0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.71310=f(0.26000)*/
-{11, 0,123,__LINE__, 0x3fe67b8c, 0xc0000000, 0x3fd147ae, 0x147ae15b},			/* 0.70258=f(0.27000)*/
-{11, 0,123,__LINE__, 0x3fe625d8, 0xc0000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.69211=f(0.28000)*/
-{11, 0,123,__LINE__, 0x3fe5d09f, 0x20000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.68171=f(0.29000)*/
-{11, 0,123,__LINE__, 0x3fe57be3, 0xc0000000, 0x3fd33333, 0x33333347},			/* 0.67137=f(0.30000)*/
-{11, 0,123,__LINE__, 0x3fe527aa, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.66109=f(0.31000)*/
-{11, 0,123,__LINE__, 0x3fe4d3f5, 0xc0000000, 0x3fd47ae1, 0x47ae148f},			/* 0.65087=f(0.32000)*/
-{11, 0,123,__LINE__, 0x3fe480ca, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.64072=f(0.33000)*/
-{11, 0,123,__LINE__, 0x3fe42e2a, 0x80000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.63063=f(0.34000)*/
-{11, 0,123,__LINE__, 0x3fe3dc1a, 0x40000000, 0x3fd66666, 0x6666667b},			/* 0.62061=f(0.35000)*/
-{11, 0,123,__LINE__, 0x3fe38a9c, 0x80000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.61067=f(0.36000)*/
-{11, 0,123,__LINE__, 0x3fe339b4, 0x60000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.60079=f(0.37000)*/
-{11, 0,123,__LINE__, 0x3fe2e965, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 0.59099=f(0.38000)*/
-{11, 0,123,__LINE__, 0x3fe299b1, 0x40000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.58126=f(0.39000)*/
-{11, 0,123,__LINE__, 0x3fe24a9c, 0x20000000, 0x3fd99999, 0x999999af},			/* 0.57160=f(0.40000)*/
-{11, 0,123,__LINE__, 0x3fe1fc28, 0x40000000, 0x3fda3d70, 0xa3d70a53},			/* 0.56203=f(0.41000)*/
-{11, 0,123,__LINE__, 0x3fe1ae58, 0x80000000, 0x3fdae147, 0xae147af7},			/* 0.55253=f(0.42000)*/
-{11, 0,123,__LINE__, 0x3fe1612f, 0x20000000, 0x3fdb851e, 0xb851eb9b},			/* 0.54311=f(0.43000)*/
-{11, 0,123,__LINE__, 0x3fe114af, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.53377=f(0.44000)*/
-{11, 0,123,__LINE__, 0x3fe0c8da, 0x80000000, 0x3fdccccc, 0xcccccce3},			/* 0.52451=f(0.45000)*/
-{11, 0,123,__LINE__, 0x3fe07db4, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.51534=f(0.46000)*/
-{11, 0,123,__LINE__, 0x3fe0333d, 0xa0000000, 0x3fde147a, 0xe147ae2b},			/* 0.50625=f(0.47000)*/
-{10, 0,123,__LINE__, 0x3fdfd2f3, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 0.49725=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fdf40d4, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.48833=f(0.49000)*/
-{10, 0,123,__LINE__, 0x3fdeb021, 0x40000000, 0x3fe00000, 0x0000000b},			/* 0.47950=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fde20df, 0x60000000, 0x3fe051eb, 0x851eb85d},			/* 0.47075=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fdd9311, 0xc0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.46210=f(0.52000)*/
-{10, 0,123,__LINE__, 0x3fdd06bb, 0x80000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.45353=f(0.53000)*/
-{10, 0,123,__LINE__, 0x3fdc7be0, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 0.44506=f(0.54000)*/
-{10, 0,123,__LINE__, 0x3fdbf282, 0x80000000, 0x3fe19999, 0x999999a5},			/* 0.43667=f(0.55000)*/
-{10, 0,123,__LINE__, 0x3fdb6aa5, 0xc0000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.42838=f(0.56000)*/
-{10, 0,123,__LINE__, 0x3fdae44c, 0x40000000, 0x3fe23d70, 0xa3d70a49},			/* 0.42018=f(0.57000)*/
-{10, 0,123,__LINE__, 0x3fda5f78, 0xc0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.41207=f(0.58000)*/
-{10, 0,123,__LINE__, 0x3fd9dc2d, 0x60000000, 0x3fe2e147, 0xae147aed},			/* 0.40406=f(0.59000)*/
-{10, 0,123,__LINE__, 0x3fd95a6c, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.39614=f(0.60000)*/
-{10, 0,123,__LINE__, 0x3fd8da37, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 0.38831=f(0.61000)*/
-{10, 0,123,__LINE__, 0x3fd85b90, 0x20000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.38058=f(0.62000)*/
-{10, 0,123,__LINE__, 0x3fd7de78, 0xc0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.37295=f(0.63000)*/
-{10, 0,123,__LINE__, 0x3fd762f2, 0x20000000, 0x3fe47ae1, 0x47ae1487},			/* 0.36541=f(0.64000)*/
-{10, 0,123,__LINE__, 0x3fd6e8fe, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.35797=f(0.65000)*/
-{10, 0,123,__LINE__, 0x3fd6709c, 0xc0000000, 0x3fe51eb8, 0x51eb852b},			/* 0.35062=f(0.66000)*/
-{10, 0,123,__LINE__, 0x3fd5f9cf, 0xc0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.34337=f(0.67000)*/
-{10, 0,123,__LINE__, 0x3fd58497, 0xa0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.33621=f(0.68000)*/
-{10, 0,123,__LINE__, 0x3fd510f4, 0xe0000000, 0x3fe6147a, 0xe147ae21},			/* 0.32915=f(0.69000)*/
-{10, 0,123,__LINE__, 0x3fd49ee7, 0xc0000000, 0x3fe66666, 0x66666673},			/* 0.32219=f(0.70000)*/
-{10, 0,123,__LINE__, 0x3fd42e70, 0xa0000000, 0x3fe6b851, 0xeb851ec5},			/* 0.31533=f(0.71000)*/
-{10, 0,123,__LINE__, 0x3fd3bf8f, 0x40000000, 0x3fe70a3d, 0x70a3d717},			/* 0.30856=f(0.72000)*/
-{10, 0,123,__LINE__, 0x3fd35243, 0xc0000000, 0x3fe75c28, 0xf5c28f69},			/* 0.30189=f(0.73000)*/
-{10, 0,123,__LINE__, 0x3fd2e68d, 0xe0000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.29532=f(0.74000)*/
-{10, 0,123,__LINE__, 0x3fd27c6d, 0x20000000, 0x3fe80000, 0x0000000d},			/* 0.28884=f(0.75000)*/
-{10, 0,123,__LINE__, 0x3fd213e0, 0xa0000000, 0x3fe851eb, 0x851eb85f},			/* 0.28246=f(0.76000)*/
-{10, 0,123,__LINE__, 0x3fd1ace8, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.27617=f(0.77000)*/
-{10, 0,123,__LINE__, 0x3fd14782, 0x60000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.26998=f(0.78000)*/
-{10, 0,123,__LINE__, 0x3fd0e3ae, 0x40000000, 0x3fe947ae, 0x147ae155},			/* 0.26389=f(0.79000)*/
-{10, 0,123,__LINE__, 0x3fd0816a, 0xe0000000, 0x3fe99999, 0x999999a7},			/* 0.25789=f(0.80000)*/
-{10, 0,123,__LINE__, 0x3fd020b6, 0xe0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.25199=f(0.81000)*/
-{10, 0,123,__LINE__, 0x3fcf8321, 0x60000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.24618=f(0.82000)*/
-{10, 0,123,__LINE__, 0x3fcec7ed, 0x40000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.24047=f(0.83000)*/
-{10, 0,123,__LINE__, 0x3fce0fce, 0x20000000, 0x3feae147, 0xae147aef},			/* 0.23485=f(0.84000)*/
-{10, 0,123,__LINE__, 0x3fcd5abf, 0xe0000000, 0x3feb3333, 0x33333341},			/* 0.22933=f(0.85000)*/
-{10, 0,123,__LINE__, 0x3fcca8bf, 0x40000000, 0x3feb851e, 0xb851eb93},			/* 0.22389=f(0.86000)*/
-{10, 0,123,__LINE__, 0x3fcbf9c7, 0x60000000, 0x3febd70a, 0x3d70a3e5},			/* 0.21856=f(0.87000)*/
-{10, 0,123,__LINE__, 0x3fcb4dd4, 0xa0000000, 0x3fec28f5, 0xc28f5c37},			/* 0.21331=f(0.88000)*/
-{10, 0,123,__LINE__, 0x3fcaa4e1, 0xa0000000, 0x3fec7ae1, 0x47ae1489},			/* 0.20815=f(0.89000)*/
-{10, 0,123,__LINE__, 0x3fc9fee9, 0xc0000000, 0x3feccccc, 0xccccccdb},			/* 0.20309=f(0.90000)*/
-{10, 0,123,__LINE__, 0x3fc95be7, 0xa0000000, 0x3fed1eb8, 0x51eb852d},			/* 0.19811=f(0.91000)*/
-{10, 0,123,__LINE__, 0x3fc8bbd6, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.19323=f(0.92000)*/
-{10, 0,123,__LINE__, 0x3fc81eaf, 0x80000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.18843=f(0.93000)*/
-{10, 0,123,__LINE__, 0x3fc6ed0c, 0xc0000000, 0x3fee6666, 0x66666675},			/* 0.17910=f(0.95000)*/
-{10, 0,123,__LINE__, 0x3fc65884, 0xa0000000, 0x3feeb851, 0xeb851ec7},			/* 0.17457=f(0.96000)*/
-{10, 0,123,__LINE__, 0x3fc5c6cf, 0x80000000, 0x3fef0a3d, 0x70a3d719},			/* 0.17012=f(0.97000)*/
-{10, 0,123,__LINE__, 0x3fc537e7, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.16576=f(0.98000)*/
-{10, 0,123,__LINE__, 0x3fc4abc4, 0x80000000, 0x3fefae14, 0x7ae147bd},			/* 0.16149=f(0.99000)*/
-{10, 0,123,__LINE__, 0x3fc42261, 0xa0000000, 0x3ff00000, 0x00000007},			/* 0.15729=f(1.00000)*/
-{10, 0,123,__LINE__, 0x3fc39bb6, 0xc0000000, 0x3ff028f5, 0xc28f5c30},			/* 0.15318=f(1.01000)*/
-{10, 0,123,__LINE__, 0x3fc317bd, 0x80000000, 0x3ff051eb, 0x851eb859},			/* 0.14916=f(1.02000)*/
-{10, 0,123,__LINE__, 0x3fc2966e, 0x80000000, 0x3ff07ae1, 0x47ae1482},			/* 0.14521=f(1.03000)*/
-{10, 0,123,__LINE__, 0x3fc217c2, 0x60000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.14135=f(1.04000)*/
-{10, 0,123,__LINE__, 0x3fc19bb1, 0xc0000000, 0x3ff0cccc, 0xccccccd4},			/* 0.13756=f(1.05000)*/
-{10, 0,123,__LINE__, 0x3fc12235, 0x20000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.13385=f(1.06000)*/
-{10, 0,123,__LINE__, 0x3fc0ab44, 0xa0000000, 0x3ff11eb8, 0x51eb8526},			/* 0.13022=f(1.07000)*/
-{10, 0,123,__LINE__, 0x3fc036d9, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 0.12667=f(1.08000)*/
-{ 9, 0,123,__LINE__, 0x3fbf89d5, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 0.12319=f(1.09000)*/
-{ 9, 0,123,__LINE__, 0x3fbeaae1, 0x40000000, 0x3ff19999, 0x999999a1},			/* 0.11979=f(1.10000)*/
-{ 9, 0,123,__LINE__, 0x3fbdd0c7, 0xe0000000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.11646=f(1.11000)*/
-{ 9, 0,123,__LINE__, 0x3fbcfb78, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 0.11321=f(1.12000)*/
-{ 9, 0,123,__LINE__, 0x3fbc2ae1, 0xa0000000, 0x3ff2147a, 0xe147ae1c},			/* 0.11002=f(1.13000)*/
-{ 9, 0,123,__LINE__, 0x3fbb5ef4, 0xc0000000, 0x3ff23d70, 0xa3d70a45},			/* 0.10691=f(1.14000)*/
-{ 9, 0,123,__LINE__, 0x3fba97a0, 0xe0000000, 0x3ff26666, 0x6666666e},			/* 0.10387=f(1.15000)*/
-{ 9, 0,123,__LINE__, 0x3fb9d4d5, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 0.10090=f(1.16000)*/
-{ 9, 0,123,__LINE__, 0x3fb91680, 0xc0000000, 0x3ff2b851, 0xeb851ec0},			/* 0.09799=f(1.17000)*/
-{ 9, 0,123,__LINE__, 0x3fb85c93, 0x60000000, 0x3ff2e147, 0xae147ae9},			/* 0.09516=f(1.18000)*/
-{ 9, 0,123,__LINE__, 0x3fb7a6fb, 0x80000000, 0x3ff30a3d, 0x70a3d712},			/* 0.09239=f(1.19000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 2.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 2.00000=f(-4.71238)*/
-{ 1, 0,123,__LINE__, 0x3ffffff6, 0xc0000000, 0xc00921fb, 0x54442d18},			/* 1.99999=f(-3.14159)*/
-{15, 0,123,__LINE__, 0x3fff9430, 0x60000000, 0xbff921fb, 0x54442d18},			/* 1.97367=f(-1.57079)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{ 9, 0,123,__LINE__, 0x3f9af3e9, 0x40000000, 0x3ff921fb, 0x54442d18},			/* 0.02632=f(1.57079)*/
-{ 2, 0,123,__LINE__, 0x3ee29d57, 0xc0000000, 0x400921fb, 0x54442d18},			/* 8.87614e-06=f(3.14159)*/
-{ 2, 0,123,__LINE__, 0x3dd74c7a, 0xc0000000, 0x4012d97c, 0x7f3321d2},			/* 8.47604e-11=f(4.71238)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03e0000, 0x00000000},			/* 2.00000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 2.00000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 2.00000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc038e666, 0x66666667},			/* 2.00000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0373333, 0x33333334},			/* 2.00000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0358000, 0x00000001},			/* 2.00000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 2.00000=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0321999, 0x9999999b},			/* 2.00000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0306666, 0x66666668},			/* 2.00000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 2.00000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc02a0000, 0x00000004},			/* 2.00000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0269999, 0x9999999e},			/* 2.00000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0233333, 0x33333338},			/* 2.00000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 2.00000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 2.00000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0xc0120000, 0x00000009},			/* 2.00000=f(-4.50000)*/
-{ 1, 0,123,__LINE__, 0x3fffffb1, 0x60000000, 0xc0066666, 0x66666678},			/* 1.99992=f(-2.80000)*/
-{19, 0,123,__LINE__, 0x3ffe1551, 0xe0000000, 0xbff19999, 0x999999bd},			/* 1.88020=f(-1.10000)*/
-{10, 0,123,__LINE__, 0x3fd95a6c, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.39614=f(0.60000)*/
-{ 8, 0,123,__LINE__, 0x3f52bad4, 0xe0000000, 0x40026666, 0x66666654},			/* 0.00114=f(2.30000)*/
-{ 2, 0,123,__LINE__, 0x3e508ddd, 0x60000000, 0x400fffff, 0xffffffee},			/* 1.54173e-08=f(4.00000)*/
-{ 2, 0,123,__LINE__, 0x3ce5a0d6, 0x80000000, 0x4016cccc, 0xccccccc4},			/* 2.40122e-15=f(5.70000)*/
-{ 2, 0,123,__LINE__, 0x3ade87a7, 0x20000000, 0x401d9999, 0x99999991},			/* 3.94590e-25=f(7.40000)*/
-{ 2, 0,123,__LINE__, 0x3851f878, 0x20000000, 0x40223333, 0x3333332f},			/* 2.11243e-37=f(9.10000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x40259999, 0x99999995},			/* 0.00000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 0.00000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x402c6666, 0x66666661},			/* 0.00000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 0.00000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x40319999, 0x99999997},			/* 0.00000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 0.00000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 0.00000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x4036b333, 0x33333330},			/* 0.00000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x40386666, 0x66666663},			/* 0.00000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x403a1999, 0x99999996},			/* 0.00000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 0.00000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 0.00000=f(29.5000)*/
-0,};
-test_erfcf(m)   {run_vector_1(m,erfcf_vec,(char *)(erfcf),"erfcf","ff");   }	
diff --git a/newlib/libm/test/erff_vec.c b/newlib/libm/test/erff_vec.c
deleted file mode 100644
index f5223339a..000000000
--- a/newlib/libm/test/erff_vec.c
+++ /dev/null
@@ -1,286 +0,0 @@
-#include "test.h"
- one_line_type erff_vec[] = {
-{11, 0,123,__LINE__, 0xbfed214a, 0xc0000000, 0xbff33333, 0x33333333},			/* -0.91031=f(-1.20000)*/
-{11, 0,123,__LINE__, 0xbfed0b20, 0x80000000, 0xbff30a3d, 0x70a3d70a},			/* -0.90760=f(-1.19000)*/
-{11, 0,123,__LINE__, 0xbfecf46d, 0xa0000000, 0xbff2e147, 0xae147ae1},			/* -0.90483=f(-1.18000)*/
-{11, 0,123,__LINE__, 0xbfecdd2f, 0xe0000000, 0xbff2b851, 0xeb851eb8},			/* -0.90200=f(-1.17000)*/
-{11, 0,123,__LINE__, 0xbfecc565, 0x60000000, 0xbff28f5c, 0x28f5c28f},			/* -0.89909=f(-1.16000)*/
-{11, 0,123,__LINE__, 0xbfecad0b, 0xe0000000, 0xbff26666, 0x66666666},			/* -0.89612=f(-1.15000)*/
-{11, 0,123,__LINE__, 0xbfec9421, 0x60000000, 0xbff23d70, 0xa3d70a3d},			/* -0.89308=f(-1.14000)*/
-{11, 0,123,__LINE__, 0xbfec7aa3, 0xc0000000, 0xbff2147a, 0xe147ae14},			/* -0.88997=f(-1.13000)*/
-{11, 0,123,__LINE__, 0xbfec6091, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -0.88678=f(-1.12000)*/
-{11, 0,123,__LINE__, 0xbfec45e7, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -0.88353=f(-1.11000)*/
-{11, 0,123,__LINE__, 0xbfec2aa3, 0xe0000000, 0xbff19999, 0x99999999},			/* -0.88020=f(-1.10000)*/
-{11, 0,123,__LINE__, 0xbfec0ec5, 0x60000000, 0xbff170a3, 0xd70a3d70},			/* -0.87680=f(-1.09000)*/
-{11, 0,123,__LINE__, 0xbfebf249, 0xc0000000, 0xbff147ae, 0x147ae147},			/* -0.87332=f(-1.08000)*/
-{11, 0,123,__LINE__, 0xbfebd52e, 0xe0000000, 0xbff11eb8, 0x51eb851e},			/* -0.86977=f(-1.07000)*/
-{11, 0,123,__LINE__, 0xbfebb772, 0xc0000000, 0xbff0f5c2, 0x8f5c28f5},			/* -0.86614=f(-1.06000)*/
-{11, 0,123,__LINE__, 0xbfeb9913, 0x80000000, 0xbff0cccc, 0xcccccccc},			/* -0.86243=f(-1.05000)*/
-{11, 0,123,__LINE__, 0xbfeb7a0f, 0x60000000, 0xbff0a3d7, 0x0a3d70a3},			/* -0.85864=f(-1.04000)*/
-{11, 0,123,__LINE__, 0xbfeb5a64, 0x60000000, 0xbff07ae1, 0x47ae147a},			/* -0.85478=f(-1.03000)*/
-{11, 0,123,__LINE__, 0xbfeb3a10, 0xa0000000, 0xbff051eb, 0x851eb851},			/* -0.85083=f(-1.02000)*/
-{11, 0,123,__LINE__, 0xbfeb1912, 0x40000000, 0xbff028f5, 0xc28f5c28},			/* -0.84681=f(-1.01000)*/
-{11, 0,123,__LINE__, 0xbfeaf767, 0xa0000000, 0xbfefffff, 0xfffffffe},			/* -0.84270=f(-0.01000)*/
-{11, 0,123,__LINE__, 0xbfead50e, 0xe0000000, 0xbfefae14, 0x7ae147ac},			/* -0.83850=f(-0.99000)*/
-{13, 0,123,__LINE__, 0xbfeab206, 0x40000000, 0xbfef5c28, 0xf5c28f5a},			/* -0.83423=f(-0.98000)*/
-{13, 0,123,__LINE__, 0xbfea8e4c, 0x20000000, 0xbfef0a3d, 0x70a3d708},			/* -0.82987=f(-0.97000)*/
-{13, 0,123,__LINE__, 0xbfea69de, 0xe0000000, 0xbfeeb851, 0xeb851eb6},			/* -0.82542=f(-0.96000)*/
-{13, 0,123,__LINE__, 0xbfea44bc, 0xc0000000, 0xbfee6666, 0x66666664},			/* -0.82089=f(-0.95000)*/
-{13, 0,123,__LINE__, 0xbfe9f854, 0x20000000, 0xbfedc28f, 0x5c28f5c0},			/* -0.81156=f(-0.93000)*/
-{13, 0,123,__LINE__, 0xbfe9d10a, 0x80000000, 0xbfed70a3, 0xd70a3d6e},			/* -0.80676=f(-0.92000)*/
-{13, 0,123,__LINE__, 0xbfe9a906, 0x20000000, 0xbfed1eb8, 0x51eb851c},			/* -0.80188=f(-0.91000)*/
-{13, 0,123,__LINE__, 0xbfe98045, 0x80000000, 0xbfeccccc, 0xccccccca},			/* -0.79690=f(-0.90000)*/
-{13, 0,123,__LINE__, 0xbfe956c7, 0xa0000000, 0xbfec7ae1, 0x47ae1478},			/* -0.79184=f(-0.89000)*/
-{13, 0,123,__LINE__, 0xbfe92c8a, 0xe0000000, 0xbfec28f5, 0xc28f5c26},			/* -0.78668=f(-0.88000)*/
-{13, 0,123,__LINE__, 0xbfe9018e, 0x20000000, 0xbfebd70a, 0x3d70a3d4},			/* -0.78143=f(-0.87000)*/
-{14, 0,123,__LINE__, 0xbfe8d5d0, 0x40000000, 0xbfeb851e, 0xb851eb82},			/* -0.77610=f(-0.86000)*/
-{14, 0,123,__LINE__, 0xbfe8a950, 0x00000000, 0xbfeb3333, 0x33333330},			/* -0.77066=f(-0.85000)*/
-{14, 0,123,__LINE__, 0xbfe87c0c, 0x80000000, 0xbfeae147, 0xae147ade},			/* -0.76514=f(-0.84000)*/
-{14, 0,123,__LINE__, 0xbfe84e04, 0xc0000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.75952=f(-0.83000)*/
-{14, 0,123,__LINE__, 0xbfe81f37, 0xa0000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.75381=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbfe7efa4, 0x80000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.74800=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbfe7bf4a, 0x80000000, 0xbfe99999, 0x99999996},			/* -0.74210=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbfe78e28, 0xe0000000, 0xbfe947ae, 0x147ae144},			/* -0.73610=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbfe75c3e, 0xc0000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.73001=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbfe7298c, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.72382=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbfe6f60f, 0xc0000000, 0xbfe851eb, 0x851eb84e},			/* -0.71753=f(-0.76000)*/
-{12, 0,123,__LINE__, 0xbfe6c1c9, 0x80000000, 0xbfe7ffff, 0xfffffffc},			/* -0.71115=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbfe68cb9, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.70467=f(-0.74000)*/
-{15, 0,123,__LINE__, 0xbfe656de, 0x20000000, 0xbfe75c28, 0xf5c28f58},			/* -0.69810=f(-0.73000)*/
-{15, 0,123,__LINE__, 0xbfe62038, 0x60000000, 0xbfe70a3d, 0x70a3d706},			/* -0.69143=f(-0.72000)*/
-{14, 0,123,__LINE__, 0xbfe5e8c7, 0xc0000000, 0xbfe6b851, 0xeb851eb4},			/* -0.68466=f(-0.71000)*/
-{14, 0,123,__LINE__, 0xbfe5b08c, 0x20000000, 0xbfe66666, 0x66666662},			/* -0.67780=f(-0.70000)*/
-{14, 0,123,__LINE__, 0xbfe57785, 0x80000000, 0xbfe6147a, 0xe147ae10},			/* -0.67084=f(-0.69000)*/
-{14, 0,123,__LINE__, 0xbfe53db4, 0x40000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.66378=f(-0.68000)*/
-{16, 0,123,__LINE__, 0xbfe50318, 0x20000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.65662=f(-0.67000)*/
-{15, 0,123,__LINE__, 0xbfe4c7b1, 0xa0000000, 0xbfe51eb8, 0x51eb851a},			/* -0.64937=f(-0.66000)*/
-{15, 0,123,__LINE__, 0xbfe48b81, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* -0.64202=f(-0.65000)*/
-{16, 0,123,__LINE__, 0xbfe44e87, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* -0.63458=f(-0.64000)*/
-{17, 0,123,__LINE__, 0xbfe410c3, 0xa0000000, 0xbfe428f5, 0xc28f5c24},			/* -0.62704=f(-0.63000)*/
-{13, 0,123,__LINE__, 0xbfe3d238, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.61941=f(-0.62000)*/
-{17, 0,123,__LINE__, 0xbfe392e4, 0x80000000, 0xbfe3851e, 0xb851eb80},			/* -0.61168=f(-0.61000)*/
-{16, 0,123,__LINE__, 0xbfe352ca, 0x00000000, 0xbfe33333, 0x3333332e},			/* -0.60385=f(-0.60000)*/
-{18, 0,123,__LINE__, 0xbfe311e9, 0x40000000, 0xbfe2e147, 0xae147adc},			/* -0.59593=f(-0.59000)*/
-{18, 0,123,__LINE__, 0xbfe2d043, 0xa0000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.58792=f(-0.58000)*/
-{20, 0,123,__LINE__, 0xbfe28dd9, 0xe0000000, 0xbfe23d70, 0xa3d70a38},			/* -0.57981=f(-0.57000)*/
-{17, 0,123,__LINE__, 0xbfe24aad, 0x20000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.57161=f(-0.56000)*/
-{23, 0,123,__LINE__, 0xbfe206be, 0xc0000000, 0xbfe19999, 0x99999994},			/* -0.56332=f(-0.55000)*/
-{17, 0,123,__LINE__, 0xbfe1c210, 0x00000000, 0xbfe147ae, 0x147ae142},			/* -0.55493=f(-0.54000)*/
-{18, 0,123,__LINE__, 0xbfe17ca2, 0x40000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.54646=f(-0.53000)*/
-{15, 0,123,__LINE__, 0xbfe13677, 0x20000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.53789=f(-0.52000)*/
-{17, 0,123,__LINE__, 0xbfe0ef90, 0x40000000, 0xbfe051eb, 0x851eb84c},			/* -0.52924=f(-0.51000)*/
-{16, 0,123,__LINE__, 0xbfe0a7ef, 0x60000000, 0xbfdfffff, 0xfffffff4},			/* -0.52049=f(-0.50000)*/
-{10, 0,123,__LINE__, 0xbfe05f96, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.51166=f(-0.49000)*/
-{10, 0,123,__LINE__, 0xbfe01686, 0x80000000, 0xbfdeb851, 0xeb851eac},			/* -0.50274=f(-0.48000)*/
-{15, 0,123,__LINE__, 0xbfdf9984, 0xc0000000, 0xbfde147a, 0xe147ae08},			/* -0.49374=f(-0.47000)*/
-{14, 0,123,__LINE__, 0xbfdf0498, 0x20000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.48465=f(-0.46000)*/
-{14, 0,123,__LINE__, 0xbfde6e4a, 0xe0000000, 0xbfdccccc, 0xccccccc0},			/* -0.47548=f(-0.45000)*/
-{15, 0,123,__LINE__, 0xbfddd6a1, 0xe0000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.46622=f(-0.44000)*/
-{13, 0,123,__LINE__, 0xbfdd3da1, 0xc0000000, 0xbfdb851e, 0xb851eb78},			/* -0.45688=f(-0.43000)*/
-{13, 0,123,__LINE__, 0xbfdca34f, 0x20000000, 0xbfdae147, 0xae147ad4},			/* -0.44746=f(-0.42000)*/
-{13, 0,123,__LINE__, 0xbfdc07af, 0x80000000, 0xbfda3d70, 0xa3d70a30},			/* -0.43796=f(-0.41000)*/
-{15, 0,123,__LINE__, 0xbfdb6ac7, 0xc0000000, 0xbfd99999, 0x9999998c},			/* -0.42839=f(-0.40000)*/
-{14, 0,123,__LINE__, 0xbfdacc9d, 0x60000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41873=f(-0.39000)*/
-{14, 0,123,__LINE__, 0xbfda2d36, 0x00000000, 0xbfd851eb, 0x851eb844},			/* -0.40900=f(-0.38000)*/
-{15, 0,123,__LINE__, 0xbfd98c97, 0x40000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.39920=f(-0.37000)*/
-{12, 0,123,__LINE__, 0xbfd8eac7, 0x20000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.38932=f(-0.36000)*/
-{12, 0,123,__LINE__, 0xbfd847cb, 0xa0000000, 0xbfd66666, 0x66666658},			/* -0.37938=f(-0.35000)*/
-{15, 0,123,__LINE__, 0xbfd7a3ab, 0x20000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.36936=f(-0.34000)*/
-{14, 0,123,__LINE__, 0xbfd6fe6c, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* -0.35927=f(-0.33000)*/
-{14, 0,123,__LINE__, 0xbfd65814, 0x80000000, 0xbfd47ae1, 0x47ae146c},			/* -0.34912=f(-0.32000)*/
-{15, 0,123,__LINE__, 0xbfd5b0ab, 0xe0000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.33890=f(-0.31000)*/
-{13, 0,123,__LINE__, 0xbfd50838, 0xa0000000, 0xbfd33333, 0x33333324},			/* -0.32862=f(-0.30000)*/
-{13, 0,123,__LINE__, 0xbfd45ec1, 0xc0000000, 0xbfd28f5c, 0x28f5c280},			/* -0.31828=f(-0.29000)*/
-{15, 0,123,__LINE__, 0xbfd3b44e, 0xa0000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.30788=f(-0.28000)*/
-{14, 0,123,__LINE__, 0xbfd308e6, 0x80000000, 0xbfd147ae, 0x147ae138},			/* -0.29741=f(-0.27000)*/
-{14, 0,123,__LINE__, 0xbfd25c90, 0xa0000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.28689=f(-0.26000)*/
-{15, 0,123,__LINE__, 0xbfd1af54, 0xe0000000, 0xbfcfffff, 0xffffffe0},			/* -0.27632=f(-0.25000)*/
-{11, 0,123,__LINE__, 0xbfd1013a, 0xc0000000, 0xbfceb851, 0xeb851e98},			/* -0.26570=f(-0.24000)*/
-{11, 0,123,__LINE__, 0xbfd0524a, 0x60000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.25502=f(-0.23000)*/
-{14, 0,123,__LINE__, 0xbfcf4516, 0xa0000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.24429=f(-0.22000)*/
-{13, 0,123,__LINE__, 0xbfcde40b, 0xc0000000, 0xbfcae147, 0xae147ac0},			/* -0.23352=f(-0.21000)*/
-{13, 0,123,__LINE__, 0xbfcc8184, 0xc0000000, 0xbfc99999, 0x99999978},			/* -0.22270=f(-0.20000)*/
-{14, 0,123,__LINE__, 0xbfcb1d91, 0xc0000000, 0xbfc851eb, 0x851eb830},			/* -0.21183=f(-0.19000)*/
-{12, 0,123,__LINE__, 0xbfc9b844, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.20093=f(-0.18000)*/
-{12, 0,123,__LINE__, 0xbfc851ac, 0x40000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.18999=f(-0.17000)*/
-{14, 0,123,__LINE__, 0xbfc6e9db, 0xe0000000, 0xbfc47ae1, 0x47ae1458},			/* -0.17901=f(-0.16000)*/
-{13, 0,123,__LINE__, 0xbfc580e4, 0x60000000, 0xbfc33333, 0x33333310},			/* -0.16799=f(-0.15000)*/
-{13, 0,123,__LINE__, 0xbfc416d7, 0x20000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.15694=f(-0.14000)*/
-{14, 0,123,__LINE__, 0xbfc2abc6, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.14586=f(-0.13000)*/
-{ 9, 0,123,__LINE__, 0xbfc13fc3, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* -0.13475=f(-0.12000)*/
-{14, 0,123,__LINE__, 0xbfbfa5c0, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.12362=f(-0.11000)*/
-{13, 0,123,__LINE__, 0xbfbcca5e, 0xa0000000, 0xbfb99999, 0x99999953},			/* -0.11246=f(-0.00100)*/
-{12, 0,123,__LINE__, 0xbfb9ed86, 0x80000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.10128=f(-0.09000)*/
-{14, 0,123,__LINE__, 0xbfb70f5c, 0x20000000, 0xbfb47ae1, 0x47ae1435},			/* -0.09007=f(-0.08000)*/
-{13, 0,123,__LINE__, 0xbfb43005, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.07885=f(-0.07000)*/
-{11, 0,123,__LINE__, 0xbfb14fa6, 0x20000000, 0xbfaeb851, 0xeb851e2d},			/* -0.06762=f(-0.06000)*/
-{13, 0,123,__LINE__, 0xbfacdcc9, 0xc0000000, 0xbfa99999, 0x9999990e},			/* -0.05637=f(-0.05000)*/
-{14, 0,123,__LINE__, 0xbfa718cd, 0x80000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.04511=f(-0.04000)*/
-{10, 0,123,__LINE__, 0xbfa153a3, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* -0.03384=f(-0.03000)*/
-{14, 0,123,__LINE__, 0xbf971b2b, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* -0.02256=f(-0.02000)*/
-{14, 0,123,__LINE__, 0xbf871bc2, 0x60000000, 0xbf847ae1, 0x47ae1249},			/* -0.01128=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd3d131, 0x60000000, 0x3cd19000, 0x00000000},			/* 1.10007e-15=f(9.74915e-16)*/
-{14, 0,123,__LINE__, 0x3f871bc2, 0x60000000, 0x3f847ae1, 0x47ae16ad},			/* 0.01128=f(0.01000)*/
-{14, 0,123,__LINE__, 0x3f971b2b, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 0.02256=f(0.02000)*/
-{10, 0,123,__LINE__, 0x3fa153a3, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 0.03384=f(0.03000)*/
-{14, 0,123,__LINE__, 0x3fa718cd, 0x80000000, 0x3fa47ae1, 0x47ae1508},			/* 0.04511=f(0.04000)*/
-{13, 0,123,__LINE__, 0x3facdcc9, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 0.05637=f(0.05000)*/
-{11, 0,123,__LINE__, 0x3fb14fa6, 0x20000000, 0x3faeb851, 0xeb851f46},			/* 0.06762=f(0.06000)*/
-{13, 0,123,__LINE__, 0x3fb43005, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 0.07885=f(0.07000)*/
-{14, 0,123,__LINE__, 0x3fb70f5c, 0x20000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.09007=f(0.08000)*/
-{12, 0,123,__LINE__, 0x3fb9ed86, 0x80000000, 0x3fb70a3d, 0x70a3d750},			/* 0.10128=f(0.09000)*/
-{13, 0,123,__LINE__, 0x3fbcca5e, 0xa0000000, 0x3fb99999, 0x999999df},			/* 0.11246=f(0.10000)*/
-{14, 0,123,__LINE__, 0x3fbfa5c0, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.12362=f(0.11000)*/
-{ 9, 0,123,__LINE__, 0x3fc13fc3, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 0.13475=f(0.12000)*/
-{14, 0,123,__LINE__, 0x3fc2abc6, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.14586=f(0.13000)*/
-{13, 0,123,__LINE__, 0x3fc416d7, 0x20000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.15694=f(0.14000)*/
-{13, 0,123,__LINE__, 0x3fc580e4, 0x60000000, 0x3fc33333, 0x33333356},			/* 0.16799=f(0.15000)*/
-{14, 0,123,__LINE__, 0x3fc6e9db, 0xe0000000, 0x3fc47ae1, 0x47ae149e},			/* 0.17901=f(0.16000)*/
-{12, 0,123,__LINE__, 0x3fc851ac, 0x40000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.18999=f(0.17000)*/
-{12, 0,123,__LINE__, 0x3fc9b844, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.20093=f(0.18000)*/
-{14, 0,123,__LINE__, 0x3fcb1d91, 0xc0000000, 0x3fc851eb, 0x851eb876},			/* 0.21183=f(0.19000)*/
-{13, 0,123,__LINE__, 0x3fcc8184, 0xc0000000, 0x3fc99999, 0x999999be},			/* 0.22270=f(0.20000)*/
-{13, 0,123,__LINE__, 0x3fcde40b, 0xc0000000, 0x3fcae147, 0xae147b06},			/* 0.23352=f(0.21000)*/
-{14, 0,123,__LINE__, 0x3fcf4516, 0xa0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.24429=f(0.22000)*/
-{11, 0,123,__LINE__, 0x3fd0524a, 0x60000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.25502=f(0.23000)*/
-{11, 0,123,__LINE__, 0x3fd1013a, 0xc0000000, 0x3fceb851, 0xeb851ede},			/* 0.26570=f(0.24000)*/
-{15, 0,123,__LINE__, 0x3fd1af54, 0xe0000000, 0x3fd00000, 0x00000013},			/* 0.27632=f(0.25000)*/
-{14, 0,123,__LINE__, 0x3fd25c90, 0xa0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.28689=f(0.26000)*/
-{14, 0,123,__LINE__, 0x3fd308e6, 0x80000000, 0x3fd147ae, 0x147ae15b},			/* 0.29741=f(0.27000)*/
-{15, 0,123,__LINE__, 0x3fd3b44e, 0xa0000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.30788=f(0.28000)*/
-{13, 0,123,__LINE__, 0x3fd45ec1, 0xc0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.31828=f(0.29000)*/
-{13, 0,123,__LINE__, 0x3fd50838, 0xa0000000, 0x3fd33333, 0x33333347},			/* 0.32862=f(0.30000)*/
-{15, 0,123,__LINE__, 0x3fd5b0ab, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.33890=f(0.31000)*/
-{14, 0,123,__LINE__, 0x3fd65814, 0x80000000, 0x3fd47ae1, 0x47ae148f},			/* 0.34912=f(0.32000)*/
-{14, 0,123,__LINE__, 0x3fd6fe6c, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.35927=f(0.33000)*/
-{15, 0,123,__LINE__, 0x3fd7a3ab, 0x20000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.36936=f(0.34000)*/
-{12, 0,123,__LINE__, 0x3fd847cb, 0xa0000000, 0x3fd66666, 0x6666667b},			/* 0.37938=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3fd8eac7, 0x20000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.38932=f(0.36000)*/
-{15, 0,123,__LINE__, 0x3fd98c97, 0x40000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.39920=f(0.37000)*/
-{14, 0,123,__LINE__, 0x3fda2d36, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 0.40900=f(0.38000)*/
-{14, 0,123,__LINE__, 0x3fdacc9d, 0x60000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41873=f(0.39000)*/
-{15, 0,123,__LINE__, 0x3fdb6ac7, 0xc0000000, 0x3fd99999, 0x999999af},			/* 0.42839=f(0.40000)*/
-{13, 0,123,__LINE__, 0x3fdc07af, 0x80000000, 0x3fda3d70, 0xa3d70a53},			/* 0.43796=f(0.41000)*/
-{13, 0,123,__LINE__, 0x3fdca34f, 0x20000000, 0x3fdae147, 0xae147af7},			/* 0.44746=f(0.42000)*/
-{13, 0,123,__LINE__, 0x3fdd3da1, 0xc0000000, 0x3fdb851e, 0xb851eb9b},			/* 0.45688=f(0.43000)*/
-{15, 0,123,__LINE__, 0x3fddd6a1, 0xe0000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.46622=f(0.44000)*/
-{14, 0,123,__LINE__, 0x3fde6e4a, 0xe0000000, 0x3fdccccc, 0xcccccce3},			/* 0.47548=f(0.45000)*/
-{14, 0,123,__LINE__, 0x3fdf0498, 0x20000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.48465=f(0.46000)*/
-{15, 0,123,__LINE__, 0x3fdf9984, 0xc0000000, 0x3fde147a, 0xe147ae2b},			/* 0.49374=f(0.47000)*/
-{10, 0,123,__LINE__, 0x3fe01686, 0x80000000, 0x3fdeb851, 0xeb851ecf},			/* 0.50274=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fe05f96, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.51166=f(0.49000)*/
-{16, 0,123,__LINE__, 0x3fe0a7ef, 0x60000000, 0x3fe00000, 0x0000000b},			/* 0.52049=f(0.50000)*/
-{17, 0,123,__LINE__, 0x3fe0ef90, 0x40000000, 0x3fe051eb, 0x851eb85d},			/* 0.52924=f(0.51000)*/
-{15, 0,123,__LINE__, 0x3fe13677, 0x20000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.53789=f(0.52000)*/
-{18, 0,123,__LINE__, 0x3fe17ca2, 0x40000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.54646=f(0.53000)*/
-{17, 0,123,__LINE__, 0x3fe1c210, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 0.55493=f(0.54000)*/
-{23, 0,123,__LINE__, 0x3fe206be, 0xc0000000, 0x3fe19999, 0x999999a5},			/* 0.56332=f(0.55000)*/
-{17, 0,123,__LINE__, 0x3fe24aad, 0x20000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.57161=f(0.56000)*/
-{20, 0,123,__LINE__, 0x3fe28dd9, 0xe0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.57981=f(0.57000)*/
-{18, 0,123,__LINE__, 0x3fe2d043, 0xa0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.58792=f(0.58000)*/
-{18, 0,123,__LINE__, 0x3fe311e9, 0x40000000, 0x3fe2e147, 0xae147aed},			/* 0.59593=f(0.59000)*/
-{16, 0,123,__LINE__, 0x3fe352ca, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.60385=f(0.60000)*/
-{17, 0,123,__LINE__, 0x3fe392e4, 0x80000000, 0x3fe3851e, 0xb851eb91},			/* 0.61168=f(0.61000)*/
-{13, 0,123,__LINE__, 0x3fe3d238, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.61941=f(0.62000)*/
-{17, 0,123,__LINE__, 0x3fe410c3, 0xa0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.62704=f(0.63000)*/
-{16, 0,123,__LINE__, 0x3fe44e87, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 0.63458=f(0.64000)*/
-{15, 0,123,__LINE__, 0x3fe48b81, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.64202=f(0.65000)*/
-{15, 0,123,__LINE__, 0x3fe4c7b1, 0xa0000000, 0x3fe51eb8, 0x51eb852b},			/* 0.64937=f(0.66000)*/
-{16, 0,123,__LINE__, 0x3fe50318, 0x20000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.65662=f(0.67000)*/
-{14, 0,123,__LINE__, 0x3fe53db4, 0x40000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.66378=f(0.68000)*/
-{14, 0,123,__LINE__, 0x3fe57785, 0x80000000, 0x3fe6147a, 0xe147ae21},			/* 0.67084=f(0.69000)*/
-{14, 0,123,__LINE__, 0x3fe5b08c, 0x20000000, 0x3fe66666, 0x66666673},			/* 0.67780=f(0.70000)*/
-{14, 0,123,__LINE__, 0x3fe5e8c7, 0xc0000000, 0x3fe6b851, 0xeb851ec5},			/* 0.68466=f(0.71000)*/
-{15, 0,123,__LINE__, 0x3fe62038, 0x60000000, 0x3fe70a3d, 0x70a3d717},			/* 0.69143=f(0.72000)*/
-{15, 0,123,__LINE__, 0x3fe656de, 0x20000000, 0x3fe75c28, 0xf5c28f69},			/* 0.69810=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3fe68cb9, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.70467=f(0.74000)*/
-{12, 0,123,__LINE__, 0x3fe6c1c9, 0x80000000, 0x3fe80000, 0x0000000d},			/* 0.71115=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe6f60f, 0xc0000000, 0x3fe851eb, 0x851eb85f},			/* 0.71753=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe7298c, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.72382=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe75c3e, 0xc0000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.73001=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe78e28, 0xe0000000, 0x3fe947ae, 0x147ae155},			/* 0.73610=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe7bf4a, 0x80000000, 0x3fe99999, 0x999999a7},			/* 0.74210=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe7efa4, 0x80000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.74800=f(0.81000)*/
-{14, 0,123,__LINE__, 0x3fe81f37, 0xa0000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.75381=f(0.82000)*/
-{14, 0,123,__LINE__, 0x3fe84e04, 0xc0000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.75952=f(0.83000)*/
-{14, 0,123,__LINE__, 0x3fe87c0c, 0x80000000, 0x3feae147, 0xae147aef},			/* 0.76514=f(0.84000)*/
-{14, 0,123,__LINE__, 0x3fe8a950, 0x00000000, 0x3feb3333, 0x33333341},			/* 0.77066=f(0.85000)*/
-{14, 0,123,__LINE__, 0x3fe8d5d0, 0x40000000, 0x3feb851e, 0xb851eb93},			/* 0.77610=f(0.86000)*/
-{13, 0,123,__LINE__, 0x3fe9018e, 0x20000000, 0x3febd70a, 0x3d70a3e5},			/* 0.78143=f(0.87000)*/
-{13, 0,123,__LINE__, 0x3fe92c8a, 0xe0000000, 0x3fec28f5, 0xc28f5c37},			/* 0.78668=f(0.88000)*/
-{13, 0,123,__LINE__, 0x3fe956c7, 0xa0000000, 0x3fec7ae1, 0x47ae1489},			/* 0.79184=f(0.89000)*/
-{13, 0,123,__LINE__, 0x3fe98045, 0x80000000, 0x3feccccc, 0xccccccdb},			/* 0.79690=f(0.90000)*/
-{13, 0,123,__LINE__, 0x3fe9a906, 0x20000000, 0x3fed1eb8, 0x51eb852d},			/* 0.80188=f(0.91000)*/
-{13, 0,123,__LINE__, 0x3fe9d10a, 0x80000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.80676=f(0.92000)*/
-{13, 0,123,__LINE__, 0x3fe9f854, 0x20000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.81156=f(0.93000)*/
-{13, 0,123,__LINE__, 0x3fea44bc, 0xc0000000, 0x3fee6666, 0x66666675},			/* 0.82089=f(0.95000)*/
-{13, 0,123,__LINE__, 0x3fea69de, 0xe0000000, 0x3feeb851, 0xeb851ec7},			/* 0.82542=f(0.96000)*/
-{13, 0,123,__LINE__, 0x3fea8e4c, 0x20000000, 0x3fef0a3d, 0x70a3d719},			/* 0.82987=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3feab206, 0x40000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.83423=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3fead50e, 0xe0000000, 0x3fefae14, 0x7ae147bd},			/* 0.83850=f(0.99000)*/
-{11, 0,123,__LINE__, 0x3feaf767, 0xa0000000, 0x3ff00000, 0x00000007},			/* 0.84270=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3feb1912, 0x40000000, 0x3ff028f5, 0xc28f5c30},			/* 0.84681=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3feb3a10, 0xa0000000, 0x3ff051eb, 0x851eb859},			/* 0.85083=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3feb5a64, 0x60000000, 0x3ff07ae1, 0x47ae1482},			/* 0.85478=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3feb7a0f, 0x60000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.85864=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3feb9913, 0x80000000, 0x3ff0cccc, 0xccccccd4},			/* 0.86243=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3febb772, 0xc0000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.86614=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3febd52e, 0xe0000000, 0x3ff11eb8, 0x51eb8526},			/* 0.86977=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3febf249, 0xc0000000, 0x3ff147ae, 0x147ae14f},			/* 0.87332=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fec0ec5, 0x60000000, 0x3ff170a3, 0xd70a3d78},			/* 0.87680=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fec2aa3, 0xe0000000, 0x3ff19999, 0x999999a1},			/* 0.88020=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3fec45e7, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.88353=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3fec6091, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 0.88678=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fec7aa3, 0xc0000000, 0x3ff2147a, 0xe147ae1c},			/* 0.88997=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fec9421, 0x60000000, 0x3ff23d70, 0xa3d70a45},			/* 0.89308=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fecad0b, 0xe0000000, 0x3ff26666, 0x6666666e},			/* 0.89612=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fecc565, 0x60000000, 0x3ff28f5c, 0x28f5c297},			/* 0.89909=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fecdd2f, 0xe0000000, 0x3ff2b851, 0xeb851ec0},			/* 0.90200=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3fecf46d, 0xa0000000, 0x3ff2e147, 0xae147ae9},			/* 0.90483=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3fed0b20, 0x80000000, 0x3ff30a3d, 0x70a3d712},			/* 0.90760=f(1.19000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -1.00000=f(-6.28318)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* -1.00000=f(-4.71238)*/
-{11, 0,123,__LINE__, 0xbfefffed, 0x60000000, 0xc00921fb, 0x54442d18},			/* -0.99999=f(-3.14159)*/
-{11, 0,123,__LINE__, 0xbfef2860, 0xc0000000, 0xbff921fb, 0x54442d18},			/* -0.97367=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{11, 0,123,__LINE__, 0x3fef2860, 0xc0000000, 0x3ff921fb, 0x54442d18},			/* 0.97367=f(1.57079)*/
-{11, 0,123,__LINE__, 0x3fefffed, 0x60000000, 0x400921fb, 0x54442d18},			/* 0.99999=f(3.14159)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 1.00000=f(4.71238)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03e0000, 0x00000000},			/* -1.00000=f(-30.0000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -1.00000=f(-28.3000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -1.00000=f(-26.6000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc038e666, 0x66666667},			/* -1.00000=f(-24.9000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0373333, 0x33333334},			/* -1.00000=f(-23.2000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0358000, 0x00000001},			/* -1.00000=f(-21.5000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -1.00000=f(-19.8000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0321999, 0x9999999b},			/* -1.00000=f(-18.1000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0306666, 0x66666668},			/* -1.00000=f(-16.4000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -1.00000=f(-14.7000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02a0000, 0x00000004},			/* -1.00000=f(-13.0000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0269999, 0x9999999e},			/* -1.00000=f(-11.3000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0233333, 0x33333338},			/* -1.00000=f(-9.60000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -1.00000=f(-7.90000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -1.00000=f(-6.20000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0120000, 0x00000009},			/* -1.00000=f(-4.50000)*/
-{11, 0,123,__LINE__, 0xbfefff62, 0xa0000000, 0xc0066666, 0x66666678},			/* -0.99992=f(-2.80000)*/
-{11, 0,123,__LINE__, 0xbfec2aa3, 0xe0000000, 0xbff19999, 0x999999bd},			/* -0.88020=f(-1.10000)*/
-{16, 0,123,__LINE__, 0x3fe352ca, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.60385=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3feff6a2, 0xa0000000, 0x40026666, 0x66666654},			/* 0.99885=f(2.30000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x400fffff, 0xffffffee},			/* 1.00000=f(4.00000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 1.00000=f(5.70000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x401d9999, 0x99999991},			/* 1.00000=f(7.40000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40223333, 0x3333332f},			/* 1.00000=f(9.10000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40259999, 0x99999995},			/* 1.00000=f(10.8000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 1.00000=f(12.5000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402c6666, 0x66666661},			/* 1.00000=f(14.2000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 1.00000=f(15.9000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40319999, 0x99999997},			/* 1.00000=f(17.6000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 1.00000=f(19.3000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 1.00000=f(21.0000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4036b333, 0x33333330},			/* 1.00000=f(22.7000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40386666, 0x66666663},			/* 1.00000=f(24.4000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403a1999, 0x99999996},			/* 1.00000=f(26.1000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 1.00000=f(27.8000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 1.00000=f(29.5000)*/
-0,};
-test_erff(m)   {run_vector_1(m,erff_vec,(char *)(erff),"erff","ff");   }	
diff --git a/newlib/libm/test/exp_vec.c b/newlib/libm/test/exp_vec.c
deleted file mode 100644
index 75adb9195..000000000
--- a/newlib/libm/test/exp_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type exp_vec[] = {
-{63, 0,123,__LINE__, 0x3fd346c4, 0x167a12df, 0xbff33333, 0x33333333},			/* 0.30119=f(-1.20000)*/
-{60, 0,123,__LINE__, 0x3fd3785c, 0x76fa8378, 0xbff30a3d, 0x70a3d70a},			/* 0.30422=f(-1.19000)*/
-{63, 0,123,__LINE__, 0x3fd3aa74, 0x7143124b, 0xbff2e147, 0xae147ae1},			/* 0.30727=f(-1.18000)*/
-{63, 0,123,__LINE__, 0x3fd3dd0d, 0x4d9faafd, 0xbff2b851, 0xeb851eb8},			/* 0.31036=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3fd41028, 0x57a8e0f5, 0xbff28f5c, 0x28f5c28f},			/* 0.31348=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3fd443c6, 0xde4c6c97, 0xbff26666, 0x66666666},			/* 0.31663=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3fd477ea, 0x33d5be3b, 0xbff23d70, 0xa3d70a3d},			/* 0.31981=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3fd4ac93, 0xadf6a741, 0xbff2147a, 0xe147ae14},			/* 0.32303=f(-1.13000)*/
-{62, 0,123,__LINE__, 0x3fd4e1c4, 0xa5d0196a, 0xbff1eb85, 0x1eb851eb},			/* 0.32627=f(-1.12000)*/
-{63, 0,123,__LINE__, 0x3fd5177e, 0x77fafcb5, 0xbff1c28f, 0x5c28f5c2},			/* 0.32955=f(-1.11000)*/
-{62, 0,123,__LINE__, 0x3fd54dc2, 0x84911bf2, 0xbff19999, 0x99999999},			/* 0.33287=f(-1.10000)*/
-{61, 0,123,__LINE__, 0x3fd58492, 0x2f36284c, 0xbff170a3, 0xd70a3d70},			/* 0.33621=f(-1.09000)*/
-{59, 0,123,__LINE__, 0x3fd5bbee, 0xdf20d40e, 0xbff147ae, 0x147ae147},			/* 0.33959=f(-1.08000)*/
-{63, 0,123,__LINE__, 0x3fd5f3d9, 0xff2404c8, 0xbff11eb8, 0x51eb851e},			/* 0.34300=f(-1.07000)*/
-{63, 0,123,__LINE__, 0x3fd62c54, 0xfdb81d18, 0xbff0f5c2, 0x8f5c28f5},			/* 0.34645=f(-1.06000)*/
-{60, 0,123,__LINE__, 0x3fd66561, 0x4d045e77, 0xbff0cccc, 0xcccccccc},			/* 0.34993=f(-1.05000)*/
-{63, 0,123,__LINE__, 0x3fd69f00, 0x62e862fe, 0xbff0a3d7, 0x0a3d70a3},			/* 0.35345=f(-1.04000)*/
-{63, 0,123,__LINE__, 0x3fd6d933, 0xb905afb7, 0xbff07ae1, 0x47ae147a},			/* 0.35700=f(-1.03000)*/
-{63, 0,123,__LINE__, 0x3fd713fc, 0xccc95f69, 0xbff051eb, 0x851eb851},			/* 0.36059=f(-1.02000)*/
-{61, 0,123,__LINE__, 0x3fd74f5d, 0x1f75e65c, 0xbff028f5, 0xc28f5c28},			/* 0.36421=f(-1.01000)*/
-{62, 0,123,__LINE__, 0x3fd78b56, 0x362cef3a, 0xbfefffff, 0xfffffffe},			/* 0.36787=f(-0.01000)*/
-{62, 0,123,__LINE__, 0x3fd7c7e9, 0x99f9513d, 0xbfefae14, 0x7ae147ac},			/* 0.37157=f(-0.99000)*/
-{62, 0,123,__LINE__, 0x3fd80518, 0xd7d9201c, 0xbfef5c28, 0xf5c28f5a},			/* 0.37531=f(-0.98000)*/
-{61, 0,123,__LINE__, 0x3fd842e5, 0x80c7d5bb, 0xbfef0a3d, 0x70a3d708},			/* 0.37908=f(-0.97000)*/
-{61, 0,123,__LINE__, 0x3fd88151, 0x29c89622, 0xbfeeb851, 0xeb851eb6},			/* 0.38289=f(-0.96000)*/
-{62, 0,123,__LINE__, 0x3fd8c05d, 0x6bf08dc1, 0xbfee6666, 0x66666664},			/* 0.38674=f(-0.95000)*/
-{59, 0,123,__LINE__, 0x3fd9000b, 0xe4716a6f, 0xbfee147a, 0xe147ae12},			/* 0.39062=f(-0.94000)*/
-{62, 0,123,__LINE__, 0x3fd9405e, 0x34a3ef58, 0xbfedc28f, 0x5c28f5c0},			/* 0.39455=f(-0.93000)*/
-{62, 0,123,__LINE__, 0x3fd98156, 0x0212a428, 0xbfed70a3, 0xd70a3d6e},			/* 0.39851=f(-0.92000)*/
-{60, 0,123,__LINE__, 0x3fd9c2f4, 0xf6849fa6, 0xbfed1eb8, 0x51eb851c},			/* 0.40252=f(-0.91000)*/
-{62, 0,123,__LINE__, 0x3fda053c, 0xc0086e22, 0xbfeccccc, 0xccccccca},			/* 0.40656=f(-0.90000)*/
-{62, 0,123,__LINE__, 0x3fda482f, 0x10ff13db, 0xbfec7ae1, 0x47ae1478},			/* 0.41065=f(-0.89000)*/
-{59, 0,123,__LINE__, 0x3fda8bcd, 0xa0272bd0, 0xbfec28f5, 0xc28f5c26},			/* 0.41478=f(-0.88000)*/
-{62, 0,123,__LINE__, 0x3fdad01a, 0x28a8231e, 0xbfebd70a, 0x3d70a3d4},			/* 0.41895=f(-0.87000)*/
-{60, 0,123,__LINE__, 0x3fdb1516, 0x6a1d9147, 0xbfeb851e, 0xb851eb82},			/* 0.42316=f(-0.86000)*/
-{62, 0,123,__LINE__, 0x3fdb5ac4, 0x28a2ada1, 0xbfeb3333, 0x33333330},			/* 0.42741=f(-0.85000)*/
-{62, 0,123,__LINE__, 0x3fdba125, 0x2cdde259, 0xbfeae147, 0xae147ade},			/* 0.43171=f(-0.84000)*/
-{58, 0,123,__LINE__, 0x3fdbe83b, 0x440c7d1f, 0xbfea8f5c, 0x28f5c28c},			/* 0.43604=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fdc3008, 0x400e7df7, 0xbfea3d70, 0xa3d70a3a},			/* 0.44043=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3fdc788d, 0xf7728476, 0xbfe9eb85, 0x1eb851e8},			/* 0.44485=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3fdcc1ce, 0x4581db8b, 0xbfe99999, 0x99999996},			/* 0.44932=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3fdd0bcb, 0x0a4ca466, 0xbfe947ae, 0x147ae144},			/* 0.45384=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3fdd5686, 0x2ab620a4, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.45840=f(-0.78000)*/
-{60, 0,123,__LINE__, 0x3fdda201, 0x90811c17, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.46301=f(-0.77000)*/
-{62, 0,123,__LINE__, 0x3fddee3f, 0x2a5c767c, 0xbfe851eb, 0x851eb84e},			/* 0.46766=f(-0.76000)*/
-{61, 0,123,__LINE__, 0x3fde3b40, 0xebefcd83, 0xbfe7ffff, 0xfffffffc},			/* 0.47236=f(-0.75000)*/
-{60, 0,123,__LINE__, 0x3fde8908, 0xcde84747, 0xbfe7ae14, 0x7ae147aa},			/* 0.47711=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3fded798, 0xce057de4, 0xbfe75c28, 0xf5c28f58},			/* 0.48190=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3fdf26f2, 0xef268c17, 0xbfe70a3d, 0x70a3d706},			/* 0.48675=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3fdf7719, 0x39573b9a, 0xbfe6b851, 0xeb851eb4},			/* 0.49164=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3fdfc80d, 0xb9dd5547, 0xbfe66666, 0x66666662},			/* 0.49658=f(-0.70000)*/
-{63, 0,123,__LINE__, 0x3fe00ce9, 0x41a309ce, 0xbfe6147a, 0xe147ae10},			/* 0.50157=f(-0.69000)*/
-{58, 0,123,__LINE__, 0x3fe03634, 0xd6b9dbdf, 0xbfe5c28f, 0x5c28f5be},			/* 0.50661=f(-0.68000)*/
-{62, 0,123,__LINE__, 0x3fe05fea, 0xaad5a0c1, 0xbfe570a3, 0xd70a3d6c},			/* 0.51170=f(-0.67000)*/
-{63, 0,123,__LINE__, 0x3fe08a0b, 0xcf512552, 0xbfe51eb8, 0x51eb851a},			/* 0.51685=f(-0.66000)*/
-{63, 0,123,__LINE__, 0x3fe0b499, 0x584682ec, 0xbfe4cccc, 0xccccccc8},			/* 0.52204=f(-0.65000)*/
-{62, 0,123,__LINE__, 0x3fe0df94, 0x5c9630d2, 0xbfe47ae1, 0x47ae1476},			/* 0.52729=f(-0.64000)*/
-{63, 0,123,__LINE__, 0x3fe10afd, 0xf5ee27db, 0xbfe428f5, 0xc28f5c24},			/* 0.53259=f(-0.63000)*/
-{63, 0,123,__LINE__, 0x3fe136d7, 0x40d11881, 0xbfe3d70a, 0x3d70a3d2},			/* 0.53794=f(-0.62000)*/
-{61, 0,123,__LINE__, 0x3fe16321, 0x5c9db374, 0xbfe3851e, 0xb851eb80},			/* 0.54335=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3fe18fdd, 0x6b9604e6, 0xbfe33333, 0x3333332e},			/* 0.54881=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fe1bd0c, 0x92e6e2d3, 0xbfe2e147, 0xae147adc},			/* 0.55432=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3fe1eaaf, 0xfaaf6e5e, 0xbfe28f5c, 0x28f5c28a},			/* 0.55989=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x3fe218c8, 0xce08a87a, 0xbfe23d70, 0xa3d70a38},			/* 0.56552=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3fe24758, 0x3b0d1a1d, 0xbfe1eb85, 0x1eb851e6},			/* 0.57120=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3fe2765f, 0x72e09020, 0xbfe19999, 0x99999994},			/* 0.57694=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x3fe2a5df, 0xa9b7eb0a, 0xbfe147ae, 0x147ae142},			/* 0.58274=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3fe2d5da, 0x16e102f0, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.58860=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3fe3064f, 0xf4ca9fa0, 0xbfe0a3d7, 0x0a3d709e},			/* 0.59452=f(-0.52000)*/
-{62, 0,123,__LINE__, 0x3fe33742, 0x810c8552, 0xbfe051eb, 0x851eb84c},			/* 0.60049=f(-0.51000)*/
-{62, 0,123,__LINE__, 0x3fe368b2, 0xfc6f960e, 0xbfdfffff, 0xfffffff4},			/* 0.60653=f(-0.50000)*/
-{62, 0,123,__LINE__, 0x3fe39aa2, 0xaaf607fa, 0xbfdf5c28, 0xf5c28f50},			/* 0.61262=f(-0.49000)*/
-{63, 0,123,__LINE__, 0x3fe3cd12, 0xd3e3b0cb, 0xbfdeb851, 0xeb851eac},			/* 0.61878=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fe40004, 0xc1c66690, 0xbfde147a, 0xe147ae08},			/* 0.62500=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3fe43379, 0xc27e7604, 0xbfdd70a3, 0xd70a3d64},			/* 0.63128=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x3fe46773, 0x27472ead, 0xbfdccccc, 0xccccccc0},			/* 0.63762=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fe49bf2, 0x44bf84f3, 0xbfdc28f5, 0xc28f5c1c},			/* 0.64403=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3fe4d0f8, 0x72f2ca71, 0xbfdb851e, 0xb851eb78},			/* 0.65050=f(-0.43000)*/
-{63, 0,123,__LINE__, 0x3fe50687, 0x0d617cbb, 0xbfdae147, 0xae147ad4},			/* 0.65704=f(-0.42000)*/
-{61, 0,123,__LINE__, 0x3fe53c9f, 0x730a2ab4, 0xbfda3d70, 0xa3d70a30},			/* 0.66365=f(-0.41000)*/
-{62, 0,123,__LINE__, 0x3fe57343, 0x067270f2, 0xbfd99999, 0x9999998c},			/* 0.67032=f(-0.40000)*/
-{63, 0,123,__LINE__, 0x3fe5aa73, 0x2db00d13, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.67705=f(-0.39000)*/
-{61, 0,123,__LINE__, 0x3fe5e231, 0x5272088b, 0xbfd851eb, 0x851eb844},			/* 0.68386=f(-0.38000)*/
-{63, 0,123,__LINE__, 0x3fe61a7e, 0xe209fb02, 0xbfd7ae14, 0x7ae147a0},			/* 0.69073=f(-0.37000)*/
-{63, 0,123,__LINE__, 0x3fe6535d, 0x4d756476, 0xbfd70a3d, 0x70a3d6fc},			/* 0.69767=f(-0.36000)*/
-{62, 0,123,__LINE__, 0x3fe68cce, 0x09671f75, 0xbfd66666, 0x66666658},			/* 0.70468=f(-0.35000)*/
-{63, 0,123,__LINE__, 0x3fe6c6d2, 0x8e50ebbb, 0xbfd5c28f, 0x5c28f5b4},			/* 0.71177=f(-0.34000)*/
-{63, 0,123,__LINE__, 0x3fe7016c, 0x586d112f, 0xbfd51eb8, 0x51eb8510},			/* 0.71892=f(-0.33000)*/
-{61, 0,123,__LINE__, 0x3fe73c9c, 0xe7c81bd4, 0xbfd47ae1, 0x47ae146c},			/* 0.72614=f(-0.32000)*/
-{59, 0,123,__LINE__, 0x3fe77865, 0xc04ab0b0, 0xbfd3d70a, 0x3d70a3c8},			/* 0.73344=f(-0.31000)*/
-{63, 0,123,__LINE__, 0x3fe7b4c8, 0x69c37c0c, 0xbfd33333, 0x33333324},			/* 0.74081=f(-0.30000)*/
-{62, 0,123,__LINE__, 0x3fe7f1c6, 0x6ff13925, 0xbfd28f5c, 0x28f5c280},			/* 0.74826=f(-0.29000)*/
-{58, 0,123,__LINE__, 0x3fe82f61, 0x628cd3dd, 0xbfd1eb85, 0x1eb851dc},			/* 0.75578=f(-0.28000)*/
-{61, 0,123,__LINE__, 0x3fe86d9a, 0xd553a44a, 0xbfd147ae, 0x147ae138},			/* 0.76337=f(-0.27000)*/
-{61, 0,123,__LINE__, 0x3fe8ac74, 0x6011c4ab, 0xbfd0a3d7, 0x0a3d7094},			/* 0.77105=f(-0.26000)*/
-{62, 0,123,__LINE__, 0x3fe8ebef, 0x9eac8210, 0xbfcfffff, 0xffffffe0},			/* 0.77880=f(-0.25000)*/
-{62, 0,123,__LINE__, 0x3fe92c0e, 0x312ce7ad, 0xbfceb851, 0xeb851e98},			/* 0.78662=f(-0.24000)*/
-{62, 0,123,__LINE__, 0x3fe96cd1, 0xbbca6578, 0xbfcd70a3, 0xd70a3d50},			/* 0.79453=f(-0.23000)*/
-{59, 0,123,__LINE__, 0x3fe9ae3b, 0xe6f5920e, 0xbfcc28f5, 0xc28f5c08},			/* 0.80251=f(-0.22000)*/
-{62, 0,123,__LINE__, 0x3fe9f04e, 0x5f63086b, 0xbfcae147, 0xae147ac0},			/* 0.81058=f(-0.21000)*/
-{58, 0,123,__LINE__, 0x3fea330a, 0xd6166160, 0xbfc99999, 0x99999978},			/* 0.81873=f(-0.20000)*/
-{61, 0,123,__LINE__, 0x3fea7673, 0x006d498c, 0xbfc851eb, 0x851eb830},			/* 0.82695=f(-0.19000)*/
-{60, 0,123,__LINE__, 0x3feaba88, 0x982ab399, 0xbfc70a3d, 0x70a3d6e8},			/* 0.83527=f(-0.18000)*/
-{63, 0,123,__LINE__, 0x3feaff4d, 0x5b822768, 0xbfc5c28f, 0x5c28f5a0},			/* 0.84366=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3feb44c3, 0x0d232e59, 0xbfc47ae1, 0x47ae1458},			/* 0.85214=f(-0.16000)*/
-{63, 0,123,__LINE__, 0x3feb8aeb, 0x7444dce8, 0xbfc33333, 0x33333310},			/* 0.86070=f(-0.15000)*/
-{63, 0,123,__LINE__, 0x3febd1c8, 0x5cb17a06, 0xbfc1eb85, 0x1eb851c8},			/* 0.86935=f(-0.14000)*/
-{60, 0,123,__LINE__, 0x3fec195b, 0x96d24457, 0xbfc0a3d7, 0x0a3d7080},			/* 0.87809=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3fec61a6, 0xf7bb55df, 0xbfbeb851, 0xeb851e71},			/* 0.88692=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3fecaaac, 0x5937a626, 0xbfbc28f5, 0xc28f5be2},			/* 0.89583=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3fecf46d, 0x99d52b42, 0xbfb99999, 0x99999953},			/* 0.90483=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3fed3eec, 0x9cf11a2e, 0xbfb70a3d, 0x70a3d6c4},			/* 0.91393=f(-0.09000)*/
-{62, 0,123,__LINE__, 0x3fed8a2b, 0x4ac4468d, 0xbfb47ae1, 0x47ae1435},			/* 0.92311=f(-0.08000)*/
-{62, 0,123,__LINE__, 0x3fedd62b, 0x906fa255, 0xbfb1eb85, 0x1eb851a6},			/* 0.93239=f(-0.07000)*/
-{62, 0,123,__LINE__, 0x3fee22ef, 0x6008dd91, 0xbfaeb851, 0xeb851e2d},			/* 0.94176=f(-0.06000)*/
-{59, 0,123,__LINE__, 0x3fee7078, 0xb0a726af, 0xbfa99999, 0x9999990e},			/* 0.95122=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3feebec9, 0x7e700b96, 0xbfa47ae1, 0x47ae13ef},			/* 0.96078=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3fef0de3, 0xcaa47bd8, 0xbf9eb851, 0xeb851da0},			/* 0.97044=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3fef5dc9, 0x9badec63, 0xbf947ae1, 0x47ae1362},			/* 0.98019=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3fefae7c, 0xfd2b9d06, 0xbf847ae1, 0x47ae1249},			/* 0.99004=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000005, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3ff0292a, 0x5d2f222b, 0x3f847ae1, 0x47ae16ad},			/* 1.01005=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3ff052be, 0xa3ec0136, 0x3f947ae1, 0x47ae1594},			/* 1.02020=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3ff07cbd, 0xe4b58646, 0x3f9eb851, 0xeb851fd2},			/* 1.03045=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3ff0a729, 0x32c7b12a, 0x3fa47ae1, 0x47ae1508},			/* 1.04081=f(0.04000)*/
-{63, 0,123,__LINE__, 0x3ff0d201, 0xa422a437, 0x3fa99999, 0x99999a27},			/* 1.05127=f(0.05000)*/
-{61, 0,123,__LINE__, 0x3ff0fd48, 0x5191c22c, 0x3faeb851, 0xeb851f46},			/* 1.06183=f(0.06000)*/
-{62, 0,123,__LINE__, 0x3ff128fe, 0x56b2de6e, 0x3fb1eb85, 0x1eb85232},			/* 1.07250=f(0.07000)*/
-{57, 0,123,__LINE__, 0x3ff15524, 0xd1fd7fc0, 0x3fb47ae1, 0x47ae14c1},			/* 1.08328=f(0.08000)*/
-{62, 0,123,__LINE__, 0x3ff181bc, 0xe4ca35b2, 0x3fb70a3d, 0x70a3d750},			/* 1.09417=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3ff1aec7, 0xb35a00d9, 0x3fb99999, 0x999999df},			/* 1.10517=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3ff1dc46, 0x64ddce33, 0x3fbc28f5, 0xc28f5c6e},			/* 1.11627=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3ff20a3a, 0x237e05b0, 0x3fbeb851, 0xeb851efd},			/* 1.12749=f(0.12000)*/
-{61, 0,123,__LINE__, 0x3ff238a4, 0x1c622c44, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.13882=f(0.13000)*/
-{62, 0,123,__LINE__, 0x3ff26785, 0x7fb89982, 0x3fc1eb85, 0x1eb8520e},			/* 1.15027=f(0.14000)*/
-{63, 0,123,__LINE__, 0x3ff296df, 0x80be4127, 0x3fc33333, 0x33333356},			/* 1.16183=f(0.15000)*/
-{61, 0,123,__LINE__, 0x3ff2c6b3, 0x55c6909c, 0x3fc47ae1, 0x47ae149e},			/* 1.17351=f(0.16000)*/
-{61, 0,123,__LINE__, 0x3ff2f702, 0x384360bc, 0x3fc5c28f, 0x5c28f5e6},			/* 1.18530=f(0.17000)*/
-{63, 0,123,__LINE__, 0x3ff327cd, 0x64ccfc0e, 0x3fc70a3d, 0x70a3d72e},			/* 1.19721=f(0.18000)*/
-{63, 0,123,__LINE__, 0x3ff35916, 0x1b2a3994, 0x3fc851eb, 0x851eb876},			/* 1.20925=f(0.19000)*/
-{63, 0,123,__LINE__, 0x3ff38add, 0x9e58ac94, 0x3fc99999, 0x999999be},			/* 1.22140=f(0.20000)*/
-{57, 0,123,__LINE__, 0x3ff3bd25, 0x3494e93e, 0x3fcae147, 0xae147b06},			/* 1.23367=f(0.21000)*/
-{63, 0,123,__LINE__, 0x3ff3efee, 0x2762dedb, 0x3fcc28f5, 0xc28f5c4e},			/* 1.24607=f(0.22000)*/
-{60, 0,123,__LINE__, 0x3ff42339, 0xc3964738, 0x3fcd70a3, 0xd70a3d96},			/* 1.25860=f(0.23000)*/
-{63, 0,123,__LINE__, 0x3ff45709, 0x595b2bef, 0x3fceb851, 0xeb851ede},			/* 1.27124=f(0.24000)*/
-{61, 0,123,__LINE__, 0x3ff48b5e, 0x3c3e818c, 0x3fd00000, 0x00000013},			/* 1.28402=f(0.25000)*/
-{60, 0,123,__LINE__, 0x3ff4c039, 0xc336d8d8, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.29693=f(0.26000)*/
-{60, 0,123,__LINE__, 0x3ff4f59d, 0x48ad2688, 0x3fd147ae, 0x147ae15b},			/* 1.30996=f(0.27000)*/
-{63, 0,123,__LINE__, 0x3ff52b8a, 0x2a85a171, 0x3fd1eb85, 0x1eb851ff},			/* 1.32313=f(0.28000)*/
-{63, 0,123,__LINE__, 0x3ff56201, 0xca28b7ab, 0x3fd28f5c, 0x28f5c2a3},			/* 1.33642=f(0.29000)*/
-{61, 0,123,__LINE__, 0x3ff59905, 0x8c8c1a9c, 0x3fd33333, 0x33333347},			/* 1.34985=f(0.30000)*/
-{62, 0,123,__LINE__, 0x3ff5d096, 0xda3be269, 0x3fd3d70a, 0x3d70a3eb},			/* 1.36342=f(0.31000)*/
-{63, 0,123,__LINE__, 0x3ff608b7, 0x1f63c8dc, 0x3fd47ae1, 0x47ae148f},			/* 1.37712=f(0.32000)*/
-{63, 0,123,__LINE__, 0x3ff64167, 0xcbd87bfc, 0x3fd51eb8, 0x51eb8533},			/* 1.39096=f(0.33000)*/
-{63, 0,123,__LINE__, 0x3ff67aaa, 0x532108c5, 0x3fd5c28f, 0x5c28f5d7},			/* 1.40494=f(0.34000)*/
-{63, 0,123,__LINE__, 0x3ff6b480, 0x2c805df3, 0x3fd66666, 0x6666667b},			/* 1.41906=f(0.35000)*/
-{63, 0,123,__LINE__, 0x3ff6eeea, 0xd2fee767, 0x3fd70a3d, 0x70a3d71f},			/* 1.43332=f(0.36000)*/
-{61, 0,123,__LINE__, 0x3ff729eb, 0xc5744225, 0x3fd7ae14, 0x7ae147c3},			/* 1.44773=f(0.37000)*/
-{58, 0,123,__LINE__, 0x3ff76584, 0x86910960, 0x3fd851eb, 0x851eb867},			/* 1.46228=f(0.38000)*/
-{62, 0,123,__LINE__, 0x3ff7a1b6, 0x9ce8bcb9, 0x3fd8f5c2, 0x8f5c290b},			/* 1.47698=f(0.39000)*/
-{60, 0,123,__LINE__, 0x3ff7de83, 0x92fbbfe7, 0x3fd99999, 0x999999af},			/* 1.49182=f(0.40000)*/
-{61, 0,123,__LINE__, 0x3ff81bec, 0xf7417433, 0x3fda3d70, 0xa3d70a53},			/* 1.50681=f(0.41000)*/
-{62, 0,123,__LINE__, 0x3ff859f4, 0x5c326bd5, 0x3fdae147, 0xae147af7},			/* 1.52196=f(0.42000)*/
-{61, 0,123,__LINE__, 0x3ff8989b, 0x5852b79b, 0x3fdb851e, 0xb851eb9b},			/* 1.53725=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3ff8d7e3, 0x863c4f25, 0x3fdc28f5, 0xc28f5c3f},			/* 1.55270=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3ff917ce, 0x84a993bd, 0x3fdccccc, 0xcccccce3},			/* 1.56831=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3ff9585d, 0xf67fee66, 0x3fdd70a3, 0xd70a3d87},			/* 1.58407=f(0.46000)*/
-{62, 0,123,__LINE__, 0x3ff99993, 0x82da891e, 0x3fde147a, 0xe147ae2b},			/* 1.59999=f(0.47000)*/
-{60, 0,123,__LINE__, 0x3ff9db70, 0xd51523c7, 0x3fdeb851, 0xeb851ecf},			/* 1.61607=f(0.48000)*/
-{62, 0,123,__LINE__, 0x3ffa1df7, 0x9cd704ed, 0x3fdf5c28, 0xf5c28f73},			/* 1.63231=f(0.49000)*/
-{62, 0,123,__LINE__, 0x3ffa6129, 0x8e1e06a5, 0x3fe00000, 0x0000000b},			/* 1.64872=f(0.50000)*/
-{62, 0,123,__LINE__, 0x3ffaa508, 0x6149bfe8, 0x3fe051eb, 0x851eb85d},			/* 1.66529=f(0.51000)*/
-{62, 0,123,__LINE__, 0x3ffae995, 0xd326caa1, 0x3fe0a3d7, 0x0a3d70af},			/* 1.68202=f(0.52000)*/
-{62, 0,123,__LINE__, 0x3ffb2ed3, 0xa4fa26c1, 0x3fe0f5c2, 0x8f5c2901},			/* 1.69893=f(0.53000)*/
-{60, 0,123,__LINE__, 0x3ffb74c3, 0x9c8cba97, 0x3fe147ae, 0x147ae153},			/* 1.71600=f(0.54000)*/
-{57, 0,123,__LINE__, 0x3ffbbb67, 0x8436f0bf, 0x3fe19999, 0x999999a5},			/* 1.73325=f(0.55000)*/
-{62, 0,123,__LINE__, 0x3ffc02c1, 0x2aec73f9, 0x3fe1eb85, 0x1eb851f7},			/* 1.75067=f(0.56000)*/
-{60, 0,123,__LINE__, 0x3ffc4ad2, 0x64480937, 0x3fe23d70, 0xa3d70a49},			/* 1.76826=f(0.57000)*/
-{63, 0,123,__LINE__, 0x3ffc939d, 0x08978822, 0x3fe28f5c, 0x28f5c29b},			/* 1.78603=f(0.58000)*/
-{63, 0,123,__LINE__, 0x3ffcdd22, 0xf4e7f25a, 0x3fe2e147, 0xae147aed},			/* 1.80398=f(0.59000)*/
-{61, 0,123,__LINE__, 0x3ffd2766, 0x0b11a9fb, 0x3fe33333, 0x3333333f},			/* 1.82211=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3ffd7268, 0x31c4c764, 0x3fe3851e, 0xb851eb91},			/* 1.84043=f(0.61000)*/
-{63, 0,123,__LINE__, 0x3ffdbe2b, 0x54958ed4, 0x3fe3d70a, 0x3d70a3e3},			/* 1.85892=f(0.62000)*/
-{63, 0,123,__LINE__, 0x3ffe0ab1, 0x64090610, 0x3fe428f5, 0xc28f5c35},			/* 1.87761=f(0.63000)*/
-{62, 0,123,__LINE__, 0x3ffe57fc, 0x55a1aa65, 0x3fe47ae1, 0x47ae1487},			/* 1.89648=f(0.64000)*/
-{58, 0,123,__LINE__, 0x3ffea60e, 0x23ec4760, 0x3fe4cccc, 0xccccccd9},			/* 1.91554=f(0.65000)*/
-{62, 0,123,__LINE__, 0x3ffef4e8, 0xce8cee85, 0x3fe51eb8, 0x51eb852b},			/* 1.93479=f(0.66000)*/
-{61, 0,123,__LINE__, 0x3fff448e, 0x5a4c108b, 0x3fe570a3, 0xd70a3d7d},			/* 1.95423=f(0.67000)*/
-{60, 0,123,__LINE__, 0x3fff9500, 0xd123b808, 0x3fe5c28f, 0x5c28f5cf},			/* 1.97387=f(0.68000)*/
-{60, 0,123,__LINE__, 0x3fffe642, 0x424ce668, 0x3fe6147a, 0xe147ae21},			/* 1.99371=f(0.69000)*/
-{64, 0,123,__LINE__, 0x40001c2a, 0x6126898e, 0x3fe66666, 0x66666673},			/* 2.01375=f(0.70000)*/
-{64, 0,123,__LINE__, 0x4000459d, 0x3581e6c6, 0x3fe6b851, 0xeb851ec5},			/* 2.03399=f(0.71000)*/
-{64, 0,123,__LINE__, 0x40006f7a, 0xaddc411b, 0x3fe70a3d, 0x70a3d717},			/* 2.05443=f(0.72000)*/
-{64, 0,123,__LINE__, 0x400099c3, 0xdc943183, 0x3fe75c28, 0xf5c28f69},			/* 2.07508=f(0.73000)*/
-{63, 0,123,__LINE__, 0x4000c479, 0xd6ca39d7, 0x3fe7ae14, 0x7ae147bb},			/* 2.09593=f(0.74000)*/
-{63, 0,123,__LINE__, 0x4000ef9d, 0xb467dcff, 0x3fe80000, 0x0000000d},			/* 2.11700=f(0.75000)*/
-{63, 0,123,__LINE__, 0x40011b30, 0x9026c963, 0x3fe851eb, 0x851eb85f},			/* 2.13827=f(0.76000)*/
-{61, 0,123,__LINE__, 0x40014733, 0x879815d4, 0x3fe8a3d7, 0x0a3d70b1},			/* 2.15976=f(0.77000)*/
-{64, 0,123,__LINE__, 0x400173a7, 0xbb2b910a, 0x3fe8f5c2, 0x8f5c2903},			/* 2.18147=f(0.78000)*/
-{64, 0,123,__LINE__, 0x4001a08e, 0x4e3723ec, 0x3fe947ae, 0x147ae155},			/* 2.20339=f(0.79000)*/
-{64, 0,123,__LINE__, 0x4001cde8, 0x66fe46ef, 0x3fe99999, 0x999999a7},			/* 2.22554=f(0.80000)*/
-{64, 0,123,__LINE__, 0x4001fbb7, 0x2eb98a93, 0x3fe9eb85, 0x1eb851f9},			/* 2.24790=f(0.81000)*/
-{64, 0,123,__LINE__, 0x400229fb, 0xd19e3339, 0x3fea3d70, 0xa3d70a4b},			/* 2.27050=f(0.82000)*/
-{62, 0,123,__LINE__, 0x400258b7, 0x7ee5e8a6, 0x3fea8f5c, 0x28f5c29d},			/* 2.29331=f(0.83000)*/
-{63, 0,123,__LINE__, 0x400287eb, 0x68d6793b, 0x3feae147, 0xae147aef},			/* 2.31636=f(0.84000)*/
-{63, 0,123,__LINE__, 0x4002b798, 0xc4c9b127, 0x3feb3333, 0x33333341},			/* 2.33964=f(0.85000)*/
-{63, 0,123,__LINE__, 0x4002e7c0, 0xcb3545cb, 0x3feb851e, 0xb851eb93},			/* 2.36316=f(0.86000)*/
-{63, 0,123,__LINE__, 0x40031864, 0xb7b2d576, 0x3febd70a, 0x3d70a3e5},			/* 2.38691=f(0.87000)*/
-{63, 0,123,__LINE__, 0x40034985, 0xc907fbc4, 0x3fec28f5, 0xc28f5c37},			/* 2.41090=f(0.88000)*/
-{61, 0,123,__LINE__, 0x40037b25, 0x412e7ab3, 0x3fec7ae1, 0x47ae1489},			/* 2.43513=f(0.89000)*/
-{62, 0,123,__LINE__, 0x4003ad44, 0x655c78c5, 0x3feccccc, 0xccccccdb},			/* 2.45960=f(0.90000)*/
-{63, 0,123,__LINE__, 0x4003dfe4, 0x7e0cd451, 0x3fed1eb8, 0x51eb852d},			/* 2.48432=f(0.91000)*/
-{62, 0,123,__LINE__, 0x40041306, 0xd7078c4a, 0x3fed70a3, 0xd70a3d7f},			/* 2.50929=f(0.92000)*/
-{62, 0,123,__LINE__, 0x400446ac, 0xbf6a3e96, 0x3fedc28f, 0x5c28f5d1},			/* 2.53450=f(0.93000)*/
-{60, 0,123,__LINE__, 0x40047ad7, 0x89b0bc48, 0x3fee147a, 0xe147ae23},			/* 2.55998=f(0.94000)*/
-{60, 0,123,__LINE__, 0x4004af88, 0x8bbdb3f8, 0x3fee6666, 0x66666675},			/* 2.58571=f(0.95000)*/
-{61, 0,123,__LINE__, 0x4004e4c1, 0x1ee3725d, 0x3feeb851, 0xeb851ec7},			/* 2.61169=f(0.96000)*/
-{63, 0,123,__LINE__, 0x40051a82, 0x9fecb959, 0x3fef0a3d, 0x70a3d719},			/* 2.63794=f(0.97000)*/
-{59, 0,123,__LINE__, 0x400550ce, 0x6f25adf0, 0x3fef5c28, 0xf5c28f6b},			/* 2.66445=f(0.98000)*/
-{61, 0,123,__LINE__, 0x400587a5, 0xf064dd04, 0x3fefae14, 0x7ae147bd},			/* 2.69123=f(0.99000)*/
-{62, 0,123,__LINE__, 0x4005bf0a, 0x8b145771, 0x3ff00000, 0x00000007},			/* 2.71828=f(1.00000)*/
-{63, 0,123,__LINE__, 0x4005f6fd, 0xaa3ae58a, 0x3ff028f5, 0xc28f5c30},			/* 2.74560=f(1.01000)*/
-{62, 0,123,__LINE__, 0x40062f80, 0xbc855229, 0x3ff051eb, 0x851eb859},			/* 2.77319=f(1.02000)*/
-{63, 0,123,__LINE__, 0x40066895, 0x344fcdd6, 0x3ff07ae1, 0x47ae1482},			/* 2.80106=f(1.03000)*/
-{63, 0,123,__LINE__, 0x4006a23c, 0x87af69f1, 0x3ff0a3d7, 0x0a3d70ab},			/* 2.82921=f(1.04000)*/
-{63, 0,123,__LINE__, 0x4006dc78, 0x307bac53, 0x3ff0cccc, 0xccccccd4},			/* 2.85765=f(1.05000)*/
-{60, 0,123,__LINE__, 0x40071749, 0xac583b88, 0x3ff0f5c2, 0x8f5c28fd},			/* 2.88637=f(1.06000)*/
-{62, 0,123,__LINE__, 0x400752b2, 0x7cbea3f3, 0x3ff11eb8, 0x51eb8526},			/* 2.91537=f(1.07000)*/
-{63, 0,123,__LINE__, 0x40078eb4, 0x27083613, 0x3ff147ae, 0x147ae14f},			/* 2.94468=f(1.08000)*/
-{62, 0,123,__LINE__, 0x4007cb50, 0x3477fe31, 0x3ff170a3, 0xd70a3d78},			/* 2.97427=f(1.09000)*/
-{63, 0,123,__LINE__, 0x40080888, 0x3244d59c, 0x3ff19999, 0x999999a1},			/* 3.00416=f(1.10000)*/
-{60, 0,123,__LINE__, 0x4008465d, 0xb1a38df8, 0x3ff1c28f, 0x5c28f5ca},			/* 3.03435=f(1.11000)*/
-{61, 0,123,__LINE__, 0x400884d2, 0x47d1367b, 0x3ff1eb85, 0x1eb851f3},			/* 3.06485=f(1.12000)*/
-{64, 0,123,__LINE__, 0x4008c3e7, 0x8e1d7bdc, 0x3ff2147a, 0xe147ae1c},			/* 3.09565=f(1.13000)*/
-{64, 0,123,__LINE__, 0x4009039f, 0x21f522b4, 0x3ff23d70, 0xa3d70a45},			/* 3.12676=f(1.14000)*/
-{64, 0,123,__LINE__, 0x400943fa, 0xa4ec9cfd, 0x3ff26666, 0x6666666e},			/* 3.15819=f(1.15000)*/
-{64, 0,123,__LINE__, 0x400984fb, 0xbccababa, 0x3ff28f5c, 0x28f5c297},			/* 3.18993=f(1.16000)*/
-{61, 0,123,__LINE__, 0x4009c6a4, 0x13937622, 0x3ff2b851, 0xeb851ec0},			/* 3.22199=f(1.17000)*/
-{61, 0,123,__LINE__, 0x400a08f5, 0x5792db9a, 0x3ff2e147, 0xae147ae9},			/* 3.25437=f(1.18000)*/
-{57, 0,123,__LINE__, 0x400a4bf1, 0x3b680dbf, 0x3ff30a3d, 0x70a3d712},			/* 3.28708=f(1.19000)*/
-{62, 0,123,__LINE__, 0x3f5e989f, 0x5d6dff64, 0xc01921fb, 0x54442d18},			/* 0.00186=f(-6.28318)*/
-{62, 0,123,__LINE__, 0x3f8265d4, 0xe92b6b9d, 0xc012d97c, 0x7f3321d2},			/* 0.00898=f(-4.71238)*/
-{63, 0,123,__LINE__, 0x3fa62022, 0x7b598efa, 0xc00921fb, 0x54442d18},			/* 0.04321=f(-3.14159)*/
-{62, 0,123,__LINE__, 0x3fca9bcc, 0x46f767e2, 0xbff921fb, 0x54442d18},			/* 0.20787=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{63, 0,123,__LINE__, 0x40133ded, 0xc855935e, 0x3ff921fb, 0x54442d18},			/* 4.81047=f(1.57079)*/
-{60, 0,123,__LINE__, 0x40372404, 0x6eb09338, 0x400921fb, 0x54442d18},			/* 23.1406=f(3.14159)*/
-{62, 0,123,__LINE__, 0x405bd456, 0x7b97537d, 0x4012d97c, 0x7f3321d2},			/* 111.317=f(4.71238)*/
-{61, 0,123,__LINE__, 0x3d3a56e0, 0xc2ac7f7d, 0xc03e0000, 0x00000000},			/* 9.35762e-14=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x3d6205c5, 0x18d0dcc0, 0xc03c4ccc, 0xcccccccd},			/* 5.12231e-13=f(-28.3000)*/
-{62, 0,123,__LINE__, 0x3d88a9e2, 0x293214d1, 0xc03a9999, 0x9999999a},			/* 2.80393e-12=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x3db0e03b, 0xb495bb53, 0xc038e666, 0x66666667},			/* 1.53486e-11=f(-24.9000)*/
-{62, 0,123,__LINE__, 0x3dd7182e, 0xae519aee, 0xc0373333, 0x33333334},			/* 8.40172e-11=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x3dff9abe, 0x68b14e5f, 0xc0358000, 0x00000001},			/* 4.59906e-10=f(-21.5000)*/
-{63, 0,123,__LINE__, 0x3e25a009, 0xc96ebd17, 0xc033cccc, 0xccccccce},			/* 2.51750e-09=f(-19.8000)*/
-{62, 0,123,__LINE__, 0x3e4d97fe, 0xd98fac4d, 0xc0321999, 0x9999999b},			/* 1.37807e-08=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x3e743fd3, 0x3a226a2a, 0xc0306666, 0x66666668},			/* 7.54346e-08=f(-16.4000)*/
-{63, 0,123,__LINE__, 0x3e9bb5ff, 0x19442356, 0xc02d6666, 0x6666666a},			/* 4.12925e-07=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x3ec2f605, 0x3b981d77, 0xc02a0000, 0x00000004},			/* 2.26033e-06=f(-13.0000)*/
-{62, 0,123,__LINE__, 0x3ee9f2a9, 0xc30dbeaa, 0xc0269999, 0x9999999e},			/* 1.23729e-05=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x3f11c132, 0xd5399ecc, 0xc0233333, 0x33333338},			/* 6.77287e-05=f(-9.60000)*/
-{58, 0,123,__LINE__, 0x3f384c0b, 0x61a858df, 0xc01f9999, 0x999999a3},			/* 0.00037=f(-7.90000)*/
-{63, 0,123,__LINE__, 0x3f60a006, 0x46cbe754, 0xc018cccc, 0xccccccd6},			/* 0.00202=f(-6.20000)*/
-{63, 0,123,__LINE__, 0x3f86c050, 0x4695c3e3, 0xc0120000, 0x00000009},			/* 0.01110=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x3faf227f, 0x1c7c6d42, 0xc0066666, 0x66666678},			/* 0.06081=f(-2.80000)*/
-{64, 0,123,__LINE__, 0x3fd54dc2, 0x84911bc0, 0xbff19999, 0x999999bd},			/* 0.33287=f(-1.10000)*/
-{59, 0,123,__LINE__, 0x3ffd2766, 0x0b11a9af, 0x3fe33333, 0x333332ec},			/* 1.82211=f(0.60000)*/
-{63, 0,123,__LINE__, 0x4023f2c8, 0x0aef881f, 0x40026666, 0x66666654},			/* 9.97418=f(2.30000)*/
-{63, 0,123,__LINE__, 0x404b4c90, 0x2e273a1a, 0x400fffff, 0xffffffee},			/* 54.5981=f(4.00000)*/
-{63, 0,123,__LINE__, 0x4072ade0, 0xdfd62083, 0x4016cccc, 0xccccccc4},			/* 298.867=f(5.70000)*/
-{64, 0,123,__LINE__, 0x40998ff0, 0x0e6ab69c, 0x401d9999, 0x99999991},			/* 1635.98=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40c17da5, 0x774ec645, 0x40223333, 0x3333332f},			/* 8955.29=f(9.10000)*/
-{59, 0,123,__LINE__, 0x40e7ef99, 0xa2e8c3af, 0x40259999, 0x99999995},			/* 49020=f(10.8000)*/
-{64, 0,123,__LINE__, 0x411060c5, 0x2565ba3e, 0x4028ffff, 0xfffffffb},			/* 268337=f(12.5000)*/
-{62, 0,123,__LINE__, 0x413669c0, 0x308d2b75, 0x402c6666, 0x66666661},			/* 1.46886e+06=f(14.2000)*/
-{61, 0,123,__LINE__, 0x415eac09, 0x532f3e04, 0x402fcccc, 0xccccccc7},			/* 8.04049e+06=f(15.9000)*/
-{60, 0,123,__LINE__, 0x4184fcb4, 0x4c4756d8, 0x40319999, 0x99999997},			/* 4.40132e+07=f(17.6000)*/
-{61, 0,123,__LINE__, 0x41acb879, 0xa3e7366b, 0x40334ccc, 0xccccccca},			/* 2.40926e+08=f(19.3000)*/
-{63, 0,123,__LINE__, 0x41d3a6e1, 0xfd9eecc0, 0x4034ffff, 0xfffffffd},			/* 1.31882e+09=f(21.0000)*/
-{60, 0,123,__LINE__, 0x41fae4b2, 0x68df16e7, 0x4036b333, 0x33333330},			/* 7.21913e+09=f(22.7000)*/
-{63, 0,123,__LINE__, 0x422266ce, 0xffa84597, 0x40386666, 0x66666663},			/* 3.95171e+10=f(24.4000)*/
-{64, 0,123,__LINE__, 0x42492ead, 0xfa09870d, 0x403a1999, 0x99999996},			/* 2.16315e+11=f(26.1000)*/
-{60, 0,123,__LINE__, 0x42713b19, 0x1e69fb28, 0x403bcccc, 0xccccccc9},			/* 1.18410e+12=f(27.8000)*/
-{62, 0,123,__LINE__, 0x42979487, 0x9e85b8de, 0x403d7fff, 0xfffffffc},			/* 6.48167e+12=f(29.5000)*/
-0,};
-test_exp(m)   {run_vector_1(m,exp_vec,(char *)(exp),"exp","dd");   }	
diff --git a/newlib/libm/test/expf_vec.c b/newlib/libm/test/expf_vec.c
deleted file mode 100644
index 256310b8a..000000000
--- a/newlib/libm/test/expf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type expf_vec[] = {
-{32, 0,123,__LINE__, 0x3fd346c4, 0x20000000, 0xbff33333, 0x33333333},			/* 0.30119=f(-1.20000)*/
-{32, 0,123,__LINE__, 0x3fd3785c, 0x80000000, 0xbff30a3d, 0x70a3d70a},			/* 0.30422=f(-1.19000)*/
-{32, 0,123,__LINE__, 0x3fd3aa74, 0x80000000, 0xbff2e147, 0xae147ae1},			/* 0.30727=f(-1.18000)*/
-{32, 0,123,__LINE__, 0x3fd3dd0d, 0x60000000, 0xbff2b851, 0xeb851eb8},			/* 0.31036=f(-1.17000)*/
-{32, 0,123,__LINE__, 0x3fd41028, 0x60000000, 0xbff28f5c, 0x28f5c28f},			/* 0.31348=f(-1.16000)*/
-{32, 0,123,__LINE__, 0x3fd443c7, 0x00000000, 0xbff26666, 0x66666666},			/* 0.31663=f(-1.15000)*/
-{32, 0,123,__LINE__, 0x3fd477ea, 0x40000000, 0xbff23d70, 0xa3d70a3d},			/* 0.31981=f(-1.14000)*/
-{32, 0,123,__LINE__, 0x3fd4ac93, 0xa0000000, 0xbff2147a, 0xe147ae14},			/* 0.32303=f(-1.13000)*/
-{32, 0,123,__LINE__, 0x3fd4e1c4, 0x80000000, 0xbff1eb85, 0x1eb851eb},			/* 0.32627=f(-1.12000)*/
-{32, 0,123,__LINE__, 0x3fd5177e, 0x60000000, 0xbff1c28f, 0x5c28f5c2},			/* 0.32955=f(-1.11000)*/
-{32, 0,123,__LINE__, 0x3fd54dc2, 0x60000000, 0xbff19999, 0x99999999},			/* 0.33287=f(-1.10000)*/
-{32, 0,123,__LINE__, 0x3fd58492, 0x20000000, 0xbff170a3, 0xd70a3d70},			/* 0.33621=f(-1.09000)*/
-{32, 0,123,__LINE__, 0x3fd5bbee, 0xe0000000, 0xbff147ae, 0x147ae147},			/* 0.33959=f(-1.08000)*/
-{32, 0,123,__LINE__, 0x3fd5f3da, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 0.34300=f(-1.07000)*/
-{32, 0,123,__LINE__, 0x3fd62c55, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 0.34645=f(-1.06000)*/
-{32, 0,123,__LINE__, 0x3fd66561, 0x60000000, 0xbff0cccc, 0xcccccccc},			/* 0.34993=f(-1.05000)*/
-{32, 0,123,__LINE__, 0x3fd69f00, 0x80000000, 0xbff0a3d7, 0x0a3d70a3},			/* 0.35345=f(-1.04000)*/
-{32, 0,123,__LINE__, 0x3fd6d933, 0xc0000000, 0xbff07ae1, 0x47ae147a},			/* 0.35700=f(-1.03000)*/
-{32, 0,123,__LINE__, 0x3fd713fc, 0xe0000000, 0xbff051eb, 0x851eb851},			/* 0.36059=f(-1.02000)*/
-{32, 0,123,__LINE__, 0x3fd74f5d, 0x20000000, 0xbff028f5, 0xc28f5c28},			/* 0.36421=f(-1.01000)*/
-{32, 0,123,__LINE__, 0x3fd78b56, 0x40000000, 0xbfefffff, 0xfffffffe},			/* 0.36787=f(-0.01000)*/
-{32, 0,123,__LINE__, 0x3fd7c7e9, 0xa0000000, 0xbfefae14, 0x7ae147ac},			/* 0.37157=f(-0.99000)*/
-{32, 0,123,__LINE__, 0x3fd80518, 0xc0000000, 0xbfef5c28, 0xf5c28f5a},			/* 0.37531=f(-0.98000)*/
-{32, 0,123,__LINE__, 0x3fd842e5, 0x80000000, 0xbfef0a3d, 0x70a3d708},			/* 0.37908=f(-0.97000)*/
-{32, 0,123,__LINE__, 0x3fd88151, 0x20000000, 0xbfeeb851, 0xeb851eb6},			/* 0.38289=f(-0.96000)*/
-{32, 0,123,__LINE__, 0x3fd8c05d, 0x80000000, 0xbfee6666, 0x66666664},			/* 0.38674=f(-0.95000)*/
-{32, 0,123,__LINE__, 0x3fd9000c, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 0.39062=f(-0.94000)*/
-{32, 0,123,__LINE__, 0x3fd9405e, 0x40000000, 0xbfedc28f, 0x5c28f5c0},			/* 0.39455=f(-0.93000)*/
-{32, 0,123,__LINE__, 0x3fd98156, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 0.39851=f(-0.92000)*/
-{32, 0,123,__LINE__, 0x3fd9c2f5, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 0.40252=f(-0.91000)*/
-{32, 0,123,__LINE__, 0x3fda053c, 0xc0000000, 0xbfeccccc, 0xccccccca},			/* 0.40656=f(-0.90000)*/
-{32, 0,123,__LINE__, 0x3fda482f, 0x20000000, 0xbfec7ae1, 0x47ae1478},			/* 0.41065=f(-0.89000)*/
-{32, 0,123,__LINE__, 0x3fda8bcd, 0xa0000000, 0xbfec28f5, 0xc28f5c26},			/* 0.41478=f(-0.88000)*/
-{32, 0,123,__LINE__, 0x3fdad01a, 0x20000000, 0xbfebd70a, 0x3d70a3d4},			/* 0.41895=f(-0.87000)*/
-{32, 0,123,__LINE__, 0x3fdb1516, 0x80000000, 0xbfeb851e, 0xb851eb82},			/* 0.42316=f(-0.86000)*/
-{32, 0,123,__LINE__, 0x3fdb5ac4, 0x40000000, 0xbfeb3333, 0x33333330},			/* 0.42741=f(-0.85000)*/
-{32, 0,123,__LINE__, 0x3fdba125, 0x60000000, 0xbfeae147, 0xae147ade},			/* 0.43171=f(-0.84000)*/
-{32, 0,123,__LINE__, 0x3fdbe83b, 0x80000000, 0xbfea8f5c, 0x28f5c28c},			/* 0.43604=f(-0.83000)*/
-{32, 0,123,__LINE__, 0x3fdc3008, 0x20000000, 0xbfea3d70, 0xa3d70a3a},			/* 0.44043=f(-0.82000)*/
-{32, 0,123,__LINE__, 0x3fdc788d, 0xe0000000, 0xbfe9eb85, 0x1eb851e8},			/* 0.44485=f(-0.81000)*/
-{32, 0,123,__LINE__, 0x3fdcc1ce, 0x20000000, 0xbfe99999, 0x99999996},			/* 0.44932=f(-0.80000)*/
-{32, 0,123,__LINE__, 0x3fdd0bcb, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 0.45384=f(-0.79000)*/
-{32, 0,123,__LINE__, 0x3fdd5686, 0x40000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.45840=f(-0.78000)*/
-{32, 0,123,__LINE__, 0x3fdda201, 0xc0000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.46301=f(-0.77000)*/
-{32, 0,123,__LINE__, 0x3fddee3f, 0x60000000, 0xbfe851eb, 0x851eb84e},			/* 0.46766=f(-0.76000)*/
-{32, 0,123,__LINE__, 0x3fde3b41, 0x20000000, 0xbfe7ffff, 0xfffffffc},			/* 0.47236=f(-0.75000)*/
-{32, 0,123,__LINE__, 0x3fde8909, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 0.47711=f(-0.74000)*/
-{32, 0,123,__LINE__, 0x3fded798, 0xc0000000, 0xbfe75c28, 0xf5c28f58},			/* 0.48190=f(-0.73000)*/
-{32, 0,123,__LINE__, 0x3fdf26f2, 0xc0000000, 0xbfe70a3d, 0x70a3d706},			/* 0.48675=f(-0.72000)*/
-{32, 0,123,__LINE__, 0x3fdf7719, 0x40000000, 0xbfe6b851, 0xeb851eb4},			/* 0.49164=f(-0.71000)*/
-{32, 0,123,__LINE__, 0x3fdfc80d, 0xc0000000, 0xbfe66666, 0x66666662},			/* 0.49658=f(-0.70000)*/
-{32, 0,123,__LINE__, 0x3fe00ce9, 0x40000000, 0xbfe6147a, 0xe147ae10},			/* 0.50157=f(-0.69000)*/
-{32, 0,123,__LINE__, 0x3fe03634, 0xe0000000, 0xbfe5c28f, 0x5c28f5be},			/* 0.50661=f(-0.68000)*/
-{32, 0,123,__LINE__, 0x3fe05fea, 0xa0000000, 0xbfe570a3, 0xd70a3d6c},			/* 0.51170=f(-0.67000)*/
-{32, 0,123,__LINE__, 0x3fe08a0b, 0xc0000000, 0xbfe51eb8, 0x51eb851a},			/* 0.51685=f(-0.66000)*/
-{32, 0,123,__LINE__, 0x3fe0b499, 0x60000000, 0xbfe4cccc, 0xccccccc8},			/* 0.52204=f(-0.65000)*/
-{32, 0,123,__LINE__, 0x3fe0df94, 0x60000000, 0xbfe47ae1, 0x47ae1476},			/* 0.52729=f(-0.64000)*/
-{32, 0,123,__LINE__, 0x3fe10afe, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 0.53259=f(-0.63000)*/
-{32, 0,123,__LINE__, 0x3fe136d7, 0x40000000, 0xbfe3d70a, 0x3d70a3d2},			/* 0.53794=f(-0.62000)*/
-{32, 0,123,__LINE__, 0x3fe16321, 0x60000000, 0xbfe3851e, 0xb851eb80},			/* 0.54335=f(-0.61000)*/
-{32, 0,123,__LINE__, 0x3fe18fdd, 0x60000000, 0xbfe33333, 0x3333332e},			/* 0.54881=f(-0.60000)*/
-{32, 0,123,__LINE__, 0x3fe1bd0c, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* 0.55432=f(-0.59000)*/
-{32, 0,123,__LINE__, 0x3fe1eab0, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 0.55989=f(-0.58000)*/
-{32, 0,123,__LINE__, 0x3fe218c8, 0xe0000000, 0xbfe23d70, 0xa3d70a38},			/* 0.56552=f(-0.57000)*/
-{32, 0,123,__LINE__, 0x3fe24758, 0x40000000, 0xbfe1eb85, 0x1eb851e6},			/* 0.57120=f(-0.56000)*/
-{32, 0,123,__LINE__, 0x3fe2765f, 0x60000000, 0xbfe19999, 0x99999994},			/* 0.57694=f(-0.55000)*/
-{32, 0,123,__LINE__, 0x3fe2a5df, 0xa0000000, 0xbfe147ae, 0x147ae142},			/* 0.58274=f(-0.54000)*/
-{32, 0,123,__LINE__, 0x3fe2d5da, 0x20000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.58860=f(-0.53000)*/
-{32, 0,123,__LINE__, 0x3fe30650, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 0.59452=f(-0.52000)*/
-{32, 0,123,__LINE__, 0x3fe33742, 0x80000000, 0xbfe051eb, 0x851eb84c},			/* 0.60049=f(-0.51000)*/
-{32, 0,123,__LINE__, 0x3fe368b3, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 0.60653=f(-0.50000)*/
-{32, 0,123,__LINE__, 0x3fe39aa2, 0xa0000000, 0xbfdf5c28, 0xf5c28f50},			/* 0.61262=f(-0.49000)*/
-{32, 0,123,__LINE__, 0x3fe3cd12, 0xe0000000, 0xbfdeb851, 0xeb851eac},			/* 0.61878=f(-0.48000)*/
-{32, 0,123,__LINE__, 0x3fe40004, 0xc0000000, 0xbfde147a, 0xe147ae08},			/* 0.62500=f(-0.47000)*/
-{32, 0,123,__LINE__, 0x3fe43379, 0xc0000000, 0xbfdd70a3, 0xd70a3d64},			/* 0.63128=f(-0.46000)*/
-{32, 0,123,__LINE__, 0x3fe46773, 0x20000000, 0xbfdccccc, 0xccccccc0},			/* 0.63762=f(-0.45000)*/
-{32, 0,123,__LINE__, 0x3fe49bf2, 0x40000000, 0xbfdc28f5, 0xc28f5c1c},			/* 0.64403=f(-0.44000)*/
-{32, 0,123,__LINE__, 0x3fe4d0f8, 0x60000000, 0xbfdb851e, 0xb851eb78},			/* 0.65050=f(-0.43000)*/
-{32, 0,123,__LINE__, 0x3fe50687, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 0.65704=f(-0.42000)*/
-{32, 0,123,__LINE__, 0x3fe53c9f, 0x60000000, 0xbfda3d70, 0xa3d70a30},			/* 0.66365=f(-0.41000)*/
-{32, 0,123,__LINE__, 0x3fe57343, 0x00000000, 0xbfd99999, 0x9999998c},			/* 0.67032=f(-0.40000)*/
-{32, 0,123,__LINE__, 0x3fe5aa73, 0x20000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.67705=f(-0.39000)*/
-{32, 0,123,__LINE__, 0x3fe5e231, 0x60000000, 0xbfd851eb, 0x851eb844},			/* 0.68386=f(-0.38000)*/
-{32, 0,123,__LINE__, 0x3fe61a7e, 0xe0000000, 0xbfd7ae14, 0x7ae147a0},			/* 0.69073=f(-0.37000)*/
-{32, 0,123,__LINE__, 0x3fe6535d, 0x40000000, 0xbfd70a3d, 0x70a3d6fc},			/* 0.69767=f(-0.36000)*/
-{32, 0,123,__LINE__, 0x3fe68cce, 0x20000000, 0xbfd66666, 0x66666658},			/* 0.70468=f(-0.35000)*/
-{32, 0,123,__LINE__, 0x3fe6c6d2, 0x80000000, 0xbfd5c28f, 0x5c28f5b4},			/* 0.71177=f(-0.34000)*/
-{32, 0,123,__LINE__, 0x3fe7016c, 0x40000000, 0xbfd51eb8, 0x51eb8510},			/* 0.71892=f(-0.33000)*/
-{32, 0,123,__LINE__, 0x3fe73c9c, 0xe0000000, 0xbfd47ae1, 0x47ae146c},			/* 0.72614=f(-0.32000)*/
-{32, 0,123,__LINE__, 0x3fe77865, 0xc0000000, 0xbfd3d70a, 0x3d70a3c8},			/* 0.73344=f(-0.31000)*/
-{32, 0,123,__LINE__, 0x3fe7b4c8, 0x60000000, 0xbfd33333, 0x33333324},			/* 0.74081=f(-0.30000)*/
-{32, 0,123,__LINE__, 0x3fe7f1c6, 0x60000000, 0xbfd28f5c, 0x28f5c280},			/* 0.74826=f(-0.29000)*/
-{32, 0,123,__LINE__, 0x3fe82f61, 0x60000000, 0xbfd1eb85, 0x1eb851dc},			/* 0.75578=f(-0.28000)*/
-{32, 0,123,__LINE__, 0x3fe86d9a, 0xc0000000, 0xbfd147ae, 0x147ae138},			/* 0.76337=f(-0.27000)*/
-{32, 0,123,__LINE__, 0x3fe8ac74, 0x60000000, 0xbfd0a3d7, 0x0a3d7094},			/* 0.77105=f(-0.26000)*/
-{32, 0,123,__LINE__, 0x3fe8ebef, 0xa0000000, 0xbfcfffff, 0xffffffe0},			/* 0.77880=f(-0.25000)*/
-{32, 0,123,__LINE__, 0x3fe92c0e, 0x40000000, 0xbfceb851, 0xeb851e98},			/* 0.78662=f(-0.24000)*/
-{32, 0,123,__LINE__, 0x3fe96cd1, 0xc0000000, 0xbfcd70a3, 0xd70a3d50},			/* 0.79453=f(-0.23000)*/
-{32, 0,123,__LINE__, 0x3fe9ae3c, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 0.80251=f(-0.22000)*/
-{32, 0,123,__LINE__, 0x3fe9f04e, 0x80000000, 0xbfcae147, 0xae147ac0},			/* 0.81058=f(-0.21000)*/
-{32, 0,123,__LINE__, 0x3fea330a, 0xe0000000, 0xbfc99999, 0x99999978},			/* 0.81873=f(-0.20000)*/
-{32, 0,123,__LINE__, 0x3fea7673, 0x20000000, 0xbfc851eb, 0x851eb830},			/* 0.82695=f(-0.19000)*/
-{32, 0,123,__LINE__, 0x3feaba88, 0xa0000000, 0xbfc70a3d, 0x70a3d6e8},			/* 0.83527=f(-0.18000)*/
-{32, 0,123,__LINE__, 0x3feaff4d, 0x80000000, 0xbfc5c28f, 0x5c28f5a0},			/* 0.84366=f(-0.17000)*/
-{32, 0,123,__LINE__, 0x3feb44c3, 0x20000000, 0xbfc47ae1, 0x47ae1458},			/* 0.85214=f(-0.16000)*/
-{32, 0,123,__LINE__, 0x3feb8aeb, 0x80000000, 0xbfc33333, 0x33333310},			/* 0.86070=f(-0.15000)*/
-{32, 0,123,__LINE__, 0x3febd1c8, 0x80000000, 0xbfc1eb85, 0x1eb851c8},			/* 0.86935=f(-0.14000)*/
-{32, 0,123,__LINE__, 0x3fec195b, 0xa0000000, 0xbfc0a3d7, 0x0a3d7080},			/* 0.87809=f(-0.13000)*/
-{32, 0,123,__LINE__, 0x3fec61a7, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 0.88692=f(-0.12000)*/
-{32, 0,123,__LINE__, 0x3fecaaac, 0x60000000, 0xbfbc28f5, 0xc28f5be2},			/* 0.89583=f(-0.11000)*/
-{32, 0,123,__LINE__, 0x3fecf46d, 0xa0000000, 0xbfb99999, 0x99999953},			/* 0.90483=f(-0.00100)*/
-{32, 0,123,__LINE__, 0x3fed3eec, 0xa0000000, 0xbfb70a3d, 0x70a3d6c4},			/* 0.91393=f(-0.09000)*/
-{32, 0,123,__LINE__, 0x3fed8a2b, 0x60000000, 0xbfb47ae1, 0x47ae1435},			/* 0.92311=f(-0.08000)*/
-{32, 0,123,__LINE__, 0x3fedd62b, 0xa0000000, 0xbfb1eb85, 0x1eb851a6},			/* 0.93239=f(-0.07000)*/
-{32, 0,123,__LINE__, 0x3fee22ef, 0x80000000, 0xbfaeb851, 0xeb851e2d},			/* 0.94176=f(-0.06000)*/
-{32, 0,123,__LINE__, 0x3fee7078, 0xc0000000, 0xbfa99999, 0x9999990e},			/* 0.95122=f(-0.05000)*/
-{32, 0,123,__LINE__, 0x3feebec9, 0x80000000, 0xbfa47ae1, 0x47ae13ef},			/* 0.96078=f(-0.04000)*/
-{32, 0,123,__LINE__, 0x3fef0de3, 0xc0000000, 0xbf9eb851, 0xeb851da0},			/* 0.97044=f(-0.03000)*/
-{32, 0,123,__LINE__, 0x3fef5dc9, 0xa0000000, 0xbf947ae1, 0x47ae1362},			/* 0.98019=f(-0.02000)*/
-{32, 0,123,__LINE__, 0x3fefae7d, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 0.99004=f(-0.00010)*/
-{32, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{32, 0,123,__LINE__, 0x3ff0292a, 0x60000000, 0x3f847ae1, 0x47ae16ad},			/* 1.01005=f(0.01000)*/
-{32, 0,123,__LINE__, 0x3ff052be, 0xa0000000, 0x3f947ae1, 0x47ae1594},			/* 1.02020=f(0.02000)*/
-{32, 0,123,__LINE__, 0x3ff07cbd, 0xe0000000, 0x3f9eb851, 0xeb851fd2},			/* 1.03045=f(0.03000)*/
-{32, 0,123,__LINE__, 0x3ff0a729, 0x40000000, 0x3fa47ae1, 0x47ae1508},			/* 1.04081=f(0.04000)*/
-{32, 0,123,__LINE__, 0x3ff0d201, 0xa0000000, 0x3fa99999, 0x99999a27},			/* 1.05127=f(0.05000)*/
-{32, 0,123,__LINE__, 0x3ff0fd48, 0x40000000, 0x3faeb851, 0xeb851f46},			/* 1.06183=f(0.06000)*/
-{32, 0,123,__LINE__, 0x3ff128fe, 0x40000000, 0x3fb1eb85, 0x1eb85232},			/* 1.07250=f(0.07000)*/
-{32, 0,123,__LINE__, 0x3ff15524, 0xc0000000, 0x3fb47ae1, 0x47ae14c1},			/* 1.08328=f(0.08000)*/
-{32, 0,123,__LINE__, 0x3ff181bc, 0xe0000000, 0x3fb70a3d, 0x70a3d750},			/* 1.09417=f(0.09000)*/
-{32, 0,123,__LINE__, 0x3ff1aec7, 0xc0000000, 0x3fb99999, 0x999999df},			/* 1.10517=f(0.10000)*/
-{32, 0,123,__LINE__, 0x3ff1dc46, 0x60000000, 0x3fbc28f5, 0xc28f5c6e},			/* 1.11627=f(0.11000)*/
-{32, 0,123,__LINE__, 0x3ff20a3a, 0x20000000, 0x3fbeb851, 0xeb851efd},			/* 1.12749=f(0.12000)*/
-{32, 0,123,__LINE__, 0x3ff238a4, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.13882=f(0.13000)*/
-{32, 0,123,__LINE__, 0x3ff26785, 0x80000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.15027=f(0.14000)*/
-{32, 0,123,__LINE__, 0x3ff296df, 0x80000000, 0x3fc33333, 0x33333356},			/* 1.16183=f(0.15000)*/
-{32, 0,123,__LINE__, 0x3ff2c6b3, 0x40000000, 0x3fc47ae1, 0x47ae149e},			/* 1.17351=f(0.16000)*/
-{32, 0,123,__LINE__, 0x3ff2f702, 0x20000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.18530=f(0.17000)*/
-{32, 0,123,__LINE__, 0x3ff327cd, 0x60000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.19721=f(0.18000)*/
-{32, 0,123,__LINE__, 0x3ff35916, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 1.20924=f(0.19000)*/
-{32, 0,123,__LINE__, 0x3ff38add, 0xa0000000, 0x3fc99999, 0x999999be},			/* 1.22140=f(0.20000)*/
-{32, 0,123,__LINE__, 0x3ff3bd25, 0x20000000, 0x3fcae147, 0xae147b06},			/* 1.23367=f(0.21000)*/
-{32, 0,123,__LINE__, 0x3ff3efee, 0x20000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.24607=f(0.22000)*/
-{32, 0,123,__LINE__, 0x3ff42339, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.25860=f(0.23000)*/
-{32, 0,123,__LINE__, 0x3ff45709, 0x40000000, 0x3fceb851, 0xeb851ede},			/* 1.27124=f(0.24000)*/
-{32, 0,123,__LINE__, 0x3ff48b5e, 0x20000000, 0x3fd00000, 0x00000013},			/* 1.28402=f(0.25000)*/
-{32, 0,123,__LINE__, 0x3ff4c039, 0xc0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.29693=f(0.26000)*/
-{32, 0,123,__LINE__, 0x3ff4f59d, 0x60000000, 0x3fd147ae, 0x147ae15b},			/* 1.30996=f(0.27000)*/
-{32, 0,123,__LINE__, 0x3ff52b8a, 0x40000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.32313=f(0.28000)*/
-{32, 0,123,__LINE__, 0x3ff56201, 0xe0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.33642=f(0.29000)*/
-{32, 0,123,__LINE__, 0x3ff59905, 0xa0000000, 0x3fd33333, 0x33333347},			/* 1.34985=f(0.30000)*/
-{32, 0,123,__LINE__, 0x3ff5d096, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.36342=f(0.31000)*/
-{32, 0,123,__LINE__, 0x3ff608b7, 0x20000000, 0x3fd47ae1, 0x47ae148f},			/* 1.37712=f(0.32000)*/
-{32, 0,123,__LINE__, 0x3ff64167, 0xe0000000, 0x3fd51eb8, 0x51eb8533},			/* 1.39096=f(0.33000)*/
-{32, 0,123,__LINE__, 0x3ff67aaa, 0x60000000, 0x3fd5c28f, 0x5c28f5d7},			/* 1.40494=f(0.34000)*/
-{32, 0,123,__LINE__, 0x3ff6b480, 0x20000000, 0x3fd66666, 0x6666667b},			/* 1.41906=f(0.35000)*/
-{32, 0,123,__LINE__, 0x3ff6eeea, 0xe0000000, 0x3fd70a3d, 0x70a3d71f},			/* 1.43332=f(0.36000)*/
-{32, 0,123,__LINE__, 0x3ff729eb, 0xc0000000, 0x3fd7ae14, 0x7ae147c3},			/* 1.44773=f(0.37000)*/
-{32, 0,123,__LINE__, 0x3ff76584, 0x80000000, 0x3fd851eb, 0x851eb867},			/* 1.46228=f(0.38000)*/
-{32, 0,123,__LINE__, 0x3ff7a1b6, 0xa0000000, 0x3fd8f5c2, 0x8f5c290b},			/* 1.47698=f(0.39000)*/
-{32, 0,123,__LINE__, 0x3ff7de83, 0xa0000000, 0x3fd99999, 0x999999af},			/* 1.49182=f(0.40000)*/
-{32, 0,123,__LINE__, 0x3ff81bed, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 1.50681=f(0.41000)*/
-{32, 0,123,__LINE__, 0x3ff859f4, 0x60000000, 0x3fdae147, 0xae147af7},			/* 1.52196=f(0.42000)*/
-{32, 0,123,__LINE__, 0x3ff8989b, 0x60000000, 0x3fdb851e, 0xb851eb9b},			/* 1.53725=f(0.43000)*/
-{32, 0,123,__LINE__, 0x3ff8d7e3, 0x80000000, 0x3fdc28f5, 0xc28f5c3f},			/* 1.55270=f(0.44000)*/
-{32, 0,123,__LINE__, 0x3ff917ce, 0x80000000, 0x3fdccccc, 0xcccccce3},			/* 1.56831=f(0.45000)*/
-{32, 0,123,__LINE__, 0x3ff9585e, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 1.58407=f(0.46000)*/
-{32, 0,123,__LINE__, 0x3ff99993, 0x80000000, 0x3fde147a, 0xe147ae2b},			/* 1.59999=f(0.47000)*/
-{32, 0,123,__LINE__, 0x3ff9db70, 0xe0000000, 0x3fdeb851, 0xeb851ecf},			/* 1.61607=f(0.48000)*/
-{32, 0,123,__LINE__, 0x3ffa1df7, 0xa0000000, 0x3fdf5c28, 0xf5c28f73},			/* 1.63231=f(0.49000)*/
-{32, 0,123,__LINE__, 0x3ffa6129, 0x80000000, 0x3fe00000, 0x0000000b},			/* 1.64872=f(0.50000)*/
-{32, 0,123,__LINE__, 0x3ffaa508, 0x60000000, 0x3fe051eb, 0x851eb85d},			/* 1.66529=f(0.51000)*/
-{32, 0,123,__LINE__, 0x3ffae995, 0xe0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 1.68202=f(0.52000)*/
-{32, 0,123,__LINE__, 0x3ffb2ed3, 0xa0000000, 0x3fe0f5c2, 0x8f5c2901},			/* 1.69893=f(0.53000)*/
-{32, 0,123,__LINE__, 0x3ffb74c3, 0xa0000000, 0x3fe147ae, 0x147ae153},			/* 1.71600=f(0.54000)*/
-{32, 0,123,__LINE__, 0x3ffbbb67, 0xa0000000, 0x3fe19999, 0x999999a5},			/* 1.73325=f(0.55000)*/
-{32, 0,123,__LINE__, 0x3ffc02c1, 0x40000000, 0x3fe1eb85, 0x1eb851f7},			/* 1.75067=f(0.56000)*/
-{32, 0,123,__LINE__, 0x3ffc4ad2, 0x60000000, 0x3fe23d70, 0xa3d70a49},			/* 1.76826=f(0.57000)*/
-{32, 0,123,__LINE__, 0x3ffc939d, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 1.78603=f(0.58000)*/
-{32, 0,123,__LINE__, 0x3ffcdd22, 0xe0000000, 0x3fe2e147, 0xae147aed},			/* 1.80398=f(0.59000)*/
-{32, 0,123,__LINE__, 0x3ffd2766, 0x20000000, 0x3fe33333, 0x3333333f},			/* 1.82211=f(0.60000)*/
-{32, 0,123,__LINE__, 0x3ffd7268, 0x40000000, 0x3fe3851e, 0xb851eb91},			/* 1.84043=f(0.61000)*/
-{32, 0,123,__LINE__, 0x3ffdbe2b, 0x60000000, 0x3fe3d70a, 0x3d70a3e3},			/* 1.85892=f(0.62000)*/
-{32, 0,123,__LINE__, 0x3ffe0ab1, 0x60000000, 0x3fe428f5, 0xc28f5c35},			/* 1.87761=f(0.63000)*/
-{32, 0,123,__LINE__, 0x3ffe57fc, 0x60000000, 0x3fe47ae1, 0x47ae1487},			/* 1.89648=f(0.64000)*/
-{32, 0,123,__LINE__, 0x3ffea60e, 0x20000000, 0x3fe4cccc, 0xccccccd9},			/* 1.91554=f(0.65000)*/
-{32, 0,123,__LINE__, 0x3ffef4e8, 0xe0000000, 0x3fe51eb8, 0x51eb852b},			/* 1.93479=f(0.66000)*/
-{32, 0,123,__LINE__, 0x3fff448e, 0x60000000, 0x3fe570a3, 0xd70a3d7d},			/* 1.95423=f(0.67000)*/
-{32, 0,123,__LINE__, 0x3fff9500, 0xc0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 1.97387=f(0.68000)*/
-{32, 0,123,__LINE__, 0x3fffe642, 0x40000000, 0x3fe6147a, 0xe147ae21},			/* 1.99371=f(0.69000)*/
-{32, 0,123,__LINE__, 0x40001c2a, 0x60000000, 0x3fe66666, 0x66666673},			/* 2.01375=f(0.70000)*/
-{32, 0,123,__LINE__, 0x4000459d, 0x20000000, 0x3fe6b851, 0xeb851ec5},			/* 2.03399=f(0.71000)*/
-{32, 0,123,__LINE__, 0x40006f7a, 0xc0000000, 0x3fe70a3d, 0x70a3d717},			/* 2.05443=f(0.72000)*/
-{32, 0,123,__LINE__, 0x400099c3, 0xe0000000, 0x3fe75c28, 0xf5c28f69},			/* 2.07508=f(0.73000)*/
-{32, 0,123,__LINE__, 0x4000c479, 0xc0000000, 0x3fe7ae14, 0x7ae147bb},			/* 2.09593=f(0.74000)*/
-{32, 0,123,__LINE__, 0x4000ef9d, 0xa0000000, 0x3fe80000, 0x0000000d},			/* 2.11700=f(0.75000)*/
-{32, 0,123,__LINE__, 0x40011b30, 0x80000000, 0x3fe851eb, 0x851eb85f},			/* 2.13827=f(0.76000)*/
-{32, 0,123,__LINE__, 0x40014733, 0x60000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 2.15976=f(0.77000)*/
-{32, 0,123,__LINE__, 0x400173a7, 0xc0000000, 0x3fe8f5c2, 0x8f5c2903},			/* 2.18147=f(0.78000)*/
-{32, 0,123,__LINE__, 0x4001a08e, 0x60000000, 0x3fe947ae, 0x147ae155},			/* 2.20339=f(0.79000)*/
-{32, 0,123,__LINE__, 0x4001cde8, 0x80000000, 0x3fe99999, 0x999999a7},			/* 2.22554=f(0.80000)*/
-{32, 0,123,__LINE__, 0x4001fbb7, 0x40000000, 0x3fe9eb85, 0x1eb851f9},			/* 2.24790=f(0.81000)*/
-{32, 0,123,__LINE__, 0x400229fb, 0xe0000000, 0x3fea3d70, 0xa3d70a4b},			/* 2.27050=f(0.82000)*/
-{32, 0,123,__LINE__, 0x400258b7, 0x60000000, 0x3fea8f5c, 0x28f5c29d},			/* 2.29331=f(0.83000)*/
-{32, 0,123,__LINE__, 0x400287eb, 0x40000000, 0x3feae147, 0xae147aef},			/* 2.31636=f(0.84000)*/
-{32, 0,123,__LINE__, 0x4002b798, 0xc0000000, 0x3feb3333, 0x33333341},			/* 2.33964=f(0.85000)*/
-{32, 0,123,__LINE__, 0x4002e7c0, 0xc0000000, 0x3feb851e, 0xb851eb93},			/* 2.36316=f(0.86000)*/
-{32, 0,123,__LINE__, 0x40031864, 0xc0000000, 0x3febd70a, 0x3d70a3e5},			/* 2.38691=f(0.87000)*/
-{32, 0,123,__LINE__, 0x40034985, 0xc0000000, 0x3fec28f5, 0xc28f5c37},			/* 2.41090=f(0.88000)*/
-{32, 0,123,__LINE__, 0x40037b25, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 2.43513=f(0.89000)*/
-{32, 0,123,__LINE__, 0x4003ad44, 0x60000000, 0x3feccccc, 0xccccccdb},			/* 2.45960=f(0.90000)*/
-{32, 0,123,__LINE__, 0x4003dfe4, 0x80000000, 0x3fed1eb8, 0x51eb852d},			/* 2.48432=f(0.91000)*/
-{32, 0,123,__LINE__, 0x40041306, 0xc0000000, 0x3fed70a3, 0xd70a3d7f},			/* 2.50929=f(0.92000)*/
-{32, 0,123,__LINE__, 0x400446ac, 0xc0000000, 0x3fedc28f, 0x5c28f5d1},			/* 2.53450=f(0.93000)*/
-{32, 0,123,__LINE__, 0x40047ad7, 0x80000000, 0x3fee147a, 0xe147ae23},			/* 2.55998=f(0.94000)*/
-{32, 0,123,__LINE__, 0x4004af88, 0x80000000, 0x3fee6666, 0x66666675},			/* 2.58571=f(0.95000)*/
-{32, 0,123,__LINE__, 0x4004e4c1, 0x20000000, 0x3feeb851, 0xeb851ec7},			/* 2.61169=f(0.96000)*/
-{32, 0,123,__LINE__, 0x40051a82, 0xa0000000, 0x3fef0a3d, 0x70a3d719},			/* 2.63794=f(0.97000)*/
-{32, 0,123,__LINE__, 0x400550ce, 0x80000000, 0x3fef5c28, 0xf5c28f6b},			/* 2.66445=f(0.98000)*/
-{32, 0,123,__LINE__, 0x400587a6, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 2.69123=f(0.99000)*/
-{32, 0,123,__LINE__, 0x4005bf0a, 0x80000000, 0x3ff00000, 0x00000007},			/* 2.71828=f(1.00000)*/
-{32, 0,123,__LINE__, 0x4005f6fd, 0xa0000000, 0x3ff028f5, 0xc28f5c30},			/* 2.74560=f(1.01000)*/
-{32, 0,123,__LINE__, 0x40062f80, 0xc0000000, 0x3ff051eb, 0x851eb859},			/* 2.77319=f(1.02000)*/
-{32, 0,123,__LINE__, 0x40066895, 0x20000000, 0x3ff07ae1, 0x47ae1482},			/* 2.80106=f(1.03000)*/
-{32, 0,123,__LINE__, 0x4006a23c, 0x80000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 2.82921=f(1.04000)*/
-{32, 0,123,__LINE__, 0x4006dc78, 0x20000000, 0x3ff0cccc, 0xccccccd4},			/* 2.85765=f(1.05000)*/
-{32, 0,123,__LINE__, 0x40071749, 0xa0000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 2.88637=f(1.06000)*/
-{32, 0,123,__LINE__, 0x400752b2, 0x80000000, 0x3ff11eb8, 0x51eb8526},			/* 2.91538=f(1.07000)*/
-{32, 0,123,__LINE__, 0x40078eb4, 0x40000000, 0x3ff147ae, 0x147ae14f},			/* 2.94468=f(1.08000)*/
-{32, 0,123,__LINE__, 0x4007cb50, 0x60000000, 0x3ff170a3, 0xd70a3d78},			/* 2.97427=f(1.09000)*/
-{32, 0,123,__LINE__, 0x40080888, 0x40000000, 0x3ff19999, 0x999999a1},			/* 3.00416=f(1.10000)*/
-{32, 0,123,__LINE__, 0x4008465d, 0xc0000000, 0x3ff1c28f, 0x5c28f5ca},			/* 3.03435=f(1.11000)*/
-{32, 0,123,__LINE__, 0x400884d2, 0x60000000, 0x3ff1eb85, 0x1eb851f3},			/* 3.06485=f(1.12000)*/
-{32, 0,123,__LINE__, 0x4008c3e7, 0xa0000000, 0x3ff2147a, 0xe147ae1c},			/* 3.09565=f(1.13000)*/
-{32, 0,123,__LINE__, 0x4009039f, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 3.12676=f(1.14000)*/
-{32, 0,123,__LINE__, 0x400943fa, 0x80000000, 0x3ff26666, 0x6666666e},			/* 3.15819=f(1.15000)*/
-{32, 0,123,__LINE__, 0x400984fb, 0xa0000000, 0x3ff28f5c, 0x28f5c297},			/* 3.18993=f(1.16000)*/
-{32, 0,123,__LINE__, 0x4009c6a4, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 3.22199=f(1.17000)*/
-{32, 0,123,__LINE__, 0x400a08f5, 0x40000000, 0x3ff2e147, 0xae147ae9},			/* 3.25437=f(1.18000)*/
-{32, 0,123,__LINE__, 0x400a4bf1, 0x40000000, 0x3ff30a3d, 0x70a3d712},			/* 3.28708=f(1.19000)*/
-{32, 0,123,__LINE__, 0x3f5e989f, 0xa0000000, 0xc01921fb, 0x54442d18},			/* 0.00186=f(-6.28318)*/
-{32, 0,123,__LINE__, 0x3f8265d5, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 0.00898=f(-4.71238)*/
-{32, 0,123,__LINE__, 0x3fa62022, 0xa0000000, 0xc00921fb, 0x54442d18},			/* 0.04321=f(-3.14159)*/
-{32, 0,123,__LINE__, 0x3fca9bcc, 0x60000000, 0xbff921fb, 0x54442d18},			/* 0.20787=f(-1.57079)*/
-{32, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{32, 0,123,__LINE__, 0x40133ded, 0xc0000000, 0x3ff921fb, 0x54442d18},			/* 4.81047=f(1.57079)*/
-{32, 0,123,__LINE__, 0x40372404, 0x60000000, 0x400921fb, 0x54442d18},			/* 23.1406=f(3.14159)*/
-{32, 0,123,__LINE__, 0x405bd456, 0x60000000, 0x4012d97c, 0x7f3321d2},			/* 111.317=f(4.71238)*/
-{32, 0,123,__LINE__, 0x3d3a56e2, 0xe0000000, 0xc03e0000, 0x00000000},			/* 9.35763e-14=f(-30.0000)*/
-{32, 0,123,__LINE__, 0x3d6205c4, 0xe0000000, 0xc03c4ccc, 0xcccccccd},			/* 5.12231e-13=f(-28.3000)*/
-{32, 0,123,__LINE__, 0x3d88a9df, 0x80000000, 0xc03a9999, 0x9999999a},			/* 2.80392e-12=f(-26.6000)*/
-{32, 0,123,__LINE__, 0x3db0e03b, 0x40000000, 0xc038e666, 0x66666667},			/* 1.53485e-11=f(-24.9000)*/
-{32, 0,123,__LINE__, 0x3dd7182b, 0xe0000000, 0xc0373333, 0x33333334},			/* 8.40170e-11=f(-23.2000)*/
-{32, 0,123,__LINE__, 0x3dff9abf, 0xc0000000, 0xc0358000, 0x00000001},			/* 4.59906e-10=f(-21.5000)*/
-{32, 0,123,__LINE__, 0x3e25a00a, 0x80000000, 0xc033cccc, 0xccccccce},			/* 2.51750e-09=f(-19.8000)*/
-{32, 0,123,__LINE__, 0x3e4d97fd, 0x40000000, 0xc0321999, 0x9999999b},			/* 1.37806e-08=f(-18.1000)*/
-{32, 0,123,__LINE__, 0x3e743fd3, 0xa0000000, 0xc0306666, 0x66666668},			/* 7.54346e-08=f(-16.4000)*/
-{32, 0,123,__LINE__, 0x3e9bb5ff, 0x80000000, 0xc02d6666, 0x6666666a},			/* 4.12925e-07=f(-14.7000)*/
-{32, 0,123,__LINE__, 0x3ec2f605, 0x60000000, 0xc02a0000, 0x00000004},			/* 2.26033e-06=f(-13.0000)*/
-{32, 0,123,__LINE__, 0x3ee9f2a9, 0xc0000000, 0xc0269999, 0x9999999e},			/* 1.23729e-05=f(-11.3000)*/
-{32, 0,123,__LINE__, 0x3f11c132, 0xa0000000, 0xc0233333, 0x33333338},			/* 6.77287e-05=f(-9.60000)*/
-{32, 0,123,__LINE__, 0x3f384c0a, 0xe0000000, 0xc01f9999, 0x999999a3},			/* 0.00037=f(-7.90000)*/
-{32, 0,123,__LINE__, 0x3f60a006, 0xa0000000, 0xc018cccc, 0xccccccd6},			/* 0.00202=f(-6.20000)*/
-{32, 0,123,__LINE__, 0x3f86c050, 0x00000000, 0xc0120000, 0x00000009},			/* 0.01110=f(-4.50000)*/
-{32, 0,123,__LINE__, 0x3faf227f, 0x40000000, 0xc0066666, 0x66666678},			/* 0.06081=f(-2.80000)*/
-{32, 0,123,__LINE__, 0x3fd54dc2, 0x60000000, 0xbff19999, 0x999999bd},			/* 0.33287=f(-1.10000)*/
-{32, 0,123,__LINE__, 0x3ffd2766, 0x20000000, 0x3fe33333, 0x333332ec},			/* 1.82211=f(0.60000)*/
-{32, 0,123,__LINE__, 0x4023f2c7, 0xe0000000, 0x40026666, 0x66666654},			/* 9.97418=f(2.30000)*/
-{32, 0,123,__LINE__, 0x404b4c90, 0x20000000, 0x400fffff, 0xffffffee},			/* 54.5981=f(4.00000)*/
-{32, 0,123,__LINE__, 0x4072ade0, 0x40000000, 0x4016cccc, 0xccccccc4},			/* 298.867=f(5.70000)*/
-{32, 0,123,__LINE__, 0x40998ff0, 0x20000000, 0x401d9999, 0x99999991},			/* 1635.98=f(7.40000)*/
-{32, 0,123,__LINE__, 0x40c17da6, 0x20000000, 0x40223333, 0x3333332f},			/* 8955.29=f(9.10000)*/
-{32, 0,123,__LINE__, 0x40e7ef9a, 0x80000000, 0x40259999, 0x99999995},			/* 49020=f(10.8000)*/
-{32, 0,123,__LINE__, 0x411060c4, 0xe0000000, 0x4028ffff, 0xfffffffb},			/* 268337=f(12.5000)*/
-{32, 0,123,__LINE__, 0x413669bf, 0xa0000000, 0x402c6666, 0x66666661},			/* 1.46886e+06=f(14.2000)*/
-{32, 0,123,__LINE__, 0x415eac08, 0x40000000, 0x402fcccc, 0xccccccc7},			/* 8.04048e+06=f(15.9000)*/
-{32, 0,123,__LINE__, 0x4184fcb5, 0x40000000, 0x40319999, 0x99999997},			/* 4.40132e+07=f(17.6000)*/
-{32, 0,123,__LINE__, 0x41acb878, 0x40000000, 0x40334ccc, 0xccccccca},			/* 2.40926e+08=f(19.3000)*/
-{32, 0,123,__LINE__, 0x41d3a6e2, 0x80000000, 0x4034ffff, 0xfffffffd},			/* 1.31882e+09=f(21.0000)*/
-{32, 0,123,__LINE__, 0x41fae4b5, 0x60000000, 0x4036b333, 0x33333330},			/* 7.21914e+09=f(22.7000)*/
-{32, 0,123,__LINE__, 0x422266cf, 0x40000000, 0x40386666, 0x66666663},			/* 3.95171e+10=f(24.4000)*/
-{32, 0,123,__LINE__, 0x42492eb0, 0x60000000, 0x403a1999, 0x99999996},			/* 2.16315e+11=f(26.1000)*/
-{32, 0,123,__LINE__, 0x42713b19, 0x20000000, 0x403bcccc, 0xccccccc9},			/* 1.18410e+12=f(27.8000)*/
-{32, 0,123,__LINE__, 0x42979489, 0x80000000, 0x403d7fff, 0xfffffffc},			/* 6.48168e+12=f(29.5000)*/
-0,};
-void test_expf(m)   { run_vector_1(m,expf_vec,(char *)(expf),"expf","ff");   }	
diff --git a/newlib/libm/test/fabs_vec.c b/newlib/libm/test/fabs_vec.c
deleted file mode 100644
index 3c7fce71a..000000000
--- a/newlib/libm/test/fabs_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type fabs_vec[] = {
-{64, 0,123,__LINE__, 0x3ff33333, 0x33333333, 0xbff33333, 0x33333333},			/* 1.20000=f(-1.20000)*/
-{64, 0,123,__LINE__, 0x3ff30a3d, 0x70a3d70a, 0xbff30a3d, 0x70a3d70a},			/* 1.19000=f(-1.19000)*/
-{64, 0,123,__LINE__, 0x3ff2e147, 0xae147ae1, 0xbff2e147, 0xae147ae1},			/* 1.18000=f(-1.18000)*/
-{64, 0,123,__LINE__, 0x3ff2b851, 0xeb851eb8, 0xbff2b851, 0xeb851eb8},			/* 1.17000=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3ff28f5c, 0x28f5c28f, 0xbff28f5c, 0x28f5c28f},			/* 1.16000=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3ff26666, 0x66666666, 0xbff26666, 0x66666666},			/* 1.15000=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3ff23d70, 0xa3d70a3d, 0xbff23d70, 0xa3d70a3d},			/* 1.14000=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3ff2147a, 0xe147ae14, 0xbff2147a, 0xe147ae14},			/* 1.13000=f(-1.13000)*/
-{64, 0,123,__LINE__, 0x3ff1eb85, 0x1eb851eb, 0xbff1eb85, 0x1eb851eb},			/* 1.12000=f(-1.12000)*/
-{64, 0,123,__LINE__, 0x3ff1c28f, 0x5c28f5c2, 0xbff1c28f, 0x5c28f5c2},			/* 1.11000=f(-1.11000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0x99999999, 0xbff19999, 0x99999999},			/* 1.10000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3ff170a3, 0xd70a3d70, 0xbff170a3, 0xd70a3d70},			/* 1.09000=f(-1.09000)*/
-{64, 0,123,__LINE__, 0x3ff147ae, 0x147ae147, 0xbff147ae, 0x147ae147},			/* 1.08000=f(-1.08000)*/
-{64, 0,123,__LINE__, 0x3ff11eb8, 0x51eb851e, 0xbff11eb8, 0x51eb851e},			/* 1.07000=f(-1.07000)*/
-{64, 0,123,__LINE__, 0x3ff0f5c2, 0x8f5c28f5, 0xbff0f5c2, 0x8f5c28f5},			/* 1.06000=f(-1.06000)*/
-{64, 0,123,__LINE__, 0x3ff0cccc, 0xcccccccc, 0xbff0cccc, 0xcccccccc},			/* 1.05000=f(-1.05000)*/
-{64, 0,123,__LINE__, 0x3ff0a3d7, 0x0a3d70a3, 0xbff0a3d7, 0x0a3d70a3},			/* 1.04000=f(-1.04000)*/
-{64, 0,123,__LINE__, 0x3ff07ae1, 0x47ae147a, 0xbff07ae1, 0x47ae147a},			/* 1.03000=f(-1.03000)*/
-{64, 0,123,__LINE__, 0x3ff051eb, 0x851eb851, 0xbff051eb, 0x851eb851},			/* 1.02000=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3ff028f5, 0xc28f5c28, 0xbff028f5, 0xc28f5c28},			/* 1.01000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfffffffe, 0xbfefffff, 0xfffffffe},			/* 0.01000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x3fefae14, 0x7ae147ac, 0xbfefae14, 0x7ae147ac},			/* 0.99000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3fef5c28, 0xf5c28f5a, 0xbfef5c28, 0xf5c28f5a},			/* 0.98000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3fef0a3d, 0x70a3d708, 0xbfef0a3d, 0x70a3d708},			/* 0.97000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3feeb851, 0xeb851eb6, 0xbfeeb851, 0xeb851eb6},			/* 0.96000=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x3fee6666, 0x66666664, 0xbfee6666, 0x66666664},			/* 0.95000=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3fee147a, 0xe147ae12, 0xbfee147a, 0xe147ae12},			/* 0.94000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x3fedc28f, 0x5c28f5c0, 0xbfedc28f, 0x5c28f5c0},			/* 0.93000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x3fed70a3, 0xd70a3d6e, 0xbfed70a3, 0xd70a3d6e},			/* 0.92000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x3fed1eb8, 0x51eb851c, 0xbfed1eb8, 0x51eb851c},			/* 0.91000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xccccccca, 0xbfeccccc, 0xccccccca},			/* 0.90000=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x3fec7ae1, 0x47ae1478, 0xbfec7ae1, 0x47ae1478},			/* 0.89000=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x3fec28f5, 0xc28f5c26, 0xbfec28f5, 0xc28f5c26},			/* 0.88000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3febd70a, 0x3d70a3d4, 0xbfebd70a, 0x3d70a3d4},			/* 0.87000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x3feb851e, 0xb851eb82, 0xbfeb851e, 0xb851eb82},			/* 0.86000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x3feb3333, 0x33333330, 0xbfeb3333, 0x33333330},			/* 0.85000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x3feae147, 0xae147ade, 0xbfeae147, 0xae147ade},			/* 0.84000=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x3fea8f5c, 0x28f5c28c, 0xbfea8f5c, 0x28f5c28c},			/* 0.83000=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fea3d70, 0xa3d70a3a, 0xbfea3d70, 0xa3d70a3a},			/* 0.82000=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3fe9eb85, 0x1eb851e8, 0xbfe9eb85, 0x1eb851e8},			/* 0.81000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0x99999996, 0xbfe99999, 0x99999996},			/* 0.80000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3fe947ae, 0x147ae144, 0xbfe947ae, 0x147ae144},			/* 0.79000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3fe8f5c2, 0x8f5c28f2, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.78000=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3fe8a3d7, 0x0a3d70a0, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.77000=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3fe851eb, 0x851eb84e, 0xbfe851eb, 0x851eb84e},			/* 0.76000=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x3fe7ffff, 0xfffffffc, 0xbfe7ffff, 0xfffffffc},			/* 0.75000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x3fe7ae14, 0x7ae147aa, 0xbfe7ae14, 0x7ae147aa},			/* 0.74000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3fe75c28, 0xf5c28f58, 0xbfe75c28, 0xf5c28f58},			/* 0.73000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3fe70a3d, 0x70a3d706, 0xbfe70a3d, 0x70a3d706},			/* 0.72000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3fe6b851, 0xeb851eb4, 0xbfe6b851, 0xeb851eb4},			/* 0.71000=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x66666662, 0xbfe66666, 0x66666662},			/* 0.70000=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x3fe6147a, 0xe147ae10, 0xbfe6147a, 0xe147ae10},			/* 0.69000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3fe5c28f, 0x5c28f5be, 0xbfe5c28f, 0x5c28f5be},			/* 0.68000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3fe570a3, 0xd70a3d6c, 0xbfe570a3, 0xd70a3d6c},			/* 0.67000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3fe51eb8, 0x51eb851a, 0xbfe51eb8, 0x51eb851a},			/* 0.66000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x3fe4cccc, 0xccccccc8, 0xbfe4cccc, 0xccccccc8},			/* 0.65000=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x3fe47ae1, 0x47ae1476, 0xbfe47ae1, 0x47ae1476},			/* 0.64000=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3fe428f5, 0xc28f5c24, 0xbfe428f5, 0xc28f5c24},			/* 0.63000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3fe3d70a, 0x3d70a3d2, 0xbfe3d70a, 0x3d70a3d2},			/* 0.62000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3fe3851e, 0xb851eb80, 0xbfe3851e, 0xb851eb80},			/* 0.61000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x3333332e, 0xbfe33333, 0x3333332e},			/* 0.60000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fe2e147, 0xae147adc, 0xbfe2e147, 0xae147adc},			/* 0.59000=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3fe28f5c, 0x28f5c28a, 0xbfe28f5c, 0x28f5c28a},			/* 0.58000=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x3fe23d70, 0xa3d70a38, 0xbfe23d70, 0xa3d70a38},			/* 0.57000=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3fe1eb85, 0x1eb851e6, 0xbfe1eb85, 0x1eb851e6},			/* 0.56000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3fe19999, 0x99999994, 0xbfe19999, 0x99999994},			/* 0.55000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x3fe147ae, 0x147ae142, 0xbfe147ae, 0x147ae142},			/* 0.54000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3fe0f5c2, 0x8f5c28f0, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.53000=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3fe0a3d7, 0x0a3d709e, 0xbfe0a3d7, 0x0a3d709e},			/* 0.52000=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x3fe051eb, 0x851eb84c, 0xbfe051eb, 0x851eb84c},			/* 0.51000=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3fdfffff, 0xfffffff4, 0xbfdfffff, 0xfffffff4},			/* 0.50000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3fdf5c28, 0xf5c28f50, 0xbfdf5c28, 0xf5c28f50},			/* 0.49000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x3fdeb851, 0xeb851eac, 0xbfdeb851, 0xeb851eac},			/* 0.48000=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fde147a, 0xe147ae08, 0xbfde147a, 0xe147ae08},			/* 0.47000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3fdd70a3, 0xd70a3d64, 0xbfdd70a3, 0xd70a3d64},			/* 0.46000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x3fdccccc, 0xccccccc0, 0xbfdccccc, 0xccccccc0},			/* 0.45000=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fdc28f5, 0xc28f5c1c, 0xbfdc28f5, 0xc28f5c1c},			/* 0.44000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3fdb851e, 0xb851eb78, 0xbfdb851e, 0xb851eb78},			/* 0.43000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3fdae147, 0xae147ad4, 0xbfdae147, 0xae147ad4},			/* 0.42000=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3fda3d70, 0xa3d70a30, 0xbfda3d70, 0xa3d70a30},			/* 0.41000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0x9999998c, 0xbfd99999, 0x9999998c},			/* 0.40000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3fd8f5c2, 0x8f5c28e8, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.39000=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3fd851eb, 0x851eb844, 0xbfd851eb, 0x851eb844},			/* 0.38000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3fd7ae14, 0x7ae147a0, 0xbfd7ae14, 0x7ae147a0},			/* 0.37000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3fd70a3d, 0x70a3d6fc, 0xbfd70a3d, 0x70a3d6fc},			/* 0.36000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3fd66666, 0x66666658, 0xbfd66666, 0x66666658},			/* 0.35000=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3fd5c28f, 0x5c28f5b4, 0xbfd5c28f, 0x5c28f5b4},			/* 0.34000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3fd51eb8, 0x51eb8510, 0xbfd51eb8, 0x51eb8510},			/* 0.33000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3fd47ae1, 0x47ae146c, 0xbfd47ae1, 0x47ae146c},			/* 0.32000=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3fd3d70a, 0x3d70a3c8, 0xbfd3d70a, 0x3d70a3c8},			/* 0.31000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x33333324, 0xbfd33333, 0x33333324},			/* 0.30000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3fd28f5c, 0x28f5c280, 0xbfd28f5c, 0x28f5c280},			/* 0.29000=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3fd1eb85, 0x1eb851dc, 0xbfd1eb85, 0x1eb851dc},			/* 0.28000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3fd147ae, 0x147ae138, 0xbfd147ae, 0x147ae138},			/* 0.27000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3fd0a3d7, 0x0a3d7094, 0xbfd0a3d7, 0x0a3d7094},			/* 0.26000=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3fcfffff, 0xffffffe0, 0xbfcfffff, 0xffffffe0},			/* 0.25000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3fceb851, 0xeb851e98, 0xbfceb851, 0xeb851e98},			/* 0.24000=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3fcd70a3, 0xd70a3d50, 0xbfcd70a3, 0xd70a3d50},			/* 0.23000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3fcc28f5, 0xc28f5c08, 0xbfcc28f5, 0xc28f5c08},			/* 0.22000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3fcae147, 0xae147ac0, 0xbfcae147, 0xae147ac0},			/* 0.21000=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0x99999978, 0xbfc99999, 0x99999978},			/* 0.20000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3fc851eb, 0x851eb830, 0xbfc851eb, 0x851eb830},			/* 0.19000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3fc70a3d, 0x70a3d6e8, 0xbfc70a3d, 0x70a3d6e8},			/* 0.18000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3fc5c28f, 0x5c28f5a0, 0xbfc5c28f, 0x5c28f5a0},			/* 0.17000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3fc47ae1, 0x47ae1458, 0xbfc47ae1, 0x47ae1458},			/* 0.16000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3fc33333, 0x33333310, 0xbfc33333, 0x33333310},			/* 0.15000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3fc1eb85, 0x1eb851c8, 0xbfc1eb85, 0x1eb851c8},			/* 0.14000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3fc0a3d7, 0x0a3d7080, 0xbfc0a3d7, 0x0a3d7080},			/* 0.13000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3fbeb851, 0xeb851e71, 0xbfbeb851, 0xeb851e71},			/* 0.12000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3fbc28f5, 0xc28f5be2, 0xbfbc28f5, 0xc28f5be2},			/* 0.11000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0x99999953, 0xbfb99999, 0x99999953},			/* 0.00100=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3fb70a3d, 0x70a3d6c4, 0xbfb70a3d, 0x70a3d6c4},			/* 0.09000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3fb47ae1, 0x47ae1435, 0xbfb47ae1, 0x47ae1435},			/* 0.08000=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x3fb1eb85, 0x1eb851a6, 0xbfb1eb85, 0x1eb851a6},			/* 0.07000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3faeb851, 0xeb851e2d, 0xbfaeb851, 0xeb851e2d},			/* 0.06000=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3fa99999, 0x9999990e, 0xbfa99999, 0x9999990e},			/* 0.05000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3fa47ae1, 0x47ae13ef, 0xbfa47ae1, 0x47ae13ef},			/* 0.04000=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3f9eb851, 0xeb851da0, 0xbf9eb851, 0xeb851da0},			/* 0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3f947ae1, 0x47ae1362, 0xbf947ae1, 0x47ae1362},			/* 0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3f847ae1, 0x47ae1249, 0xbf847ae1, 0x47ae1249},			/* 0.00010=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847ae1, 0x47ae16ad, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947ae1, 0x47ae1594, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb851, 0xeb851fd2, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47ae1, 0x47ae1508, 0x3fa47ae1, 0x47ae1508},			/* 0.04000=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99999, 0x99999a27, 0x3fa99999, 0x99999a27},			/* 0.05000=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faeb851, 0xeb851f46, 0x3faeb851, 0xeb851f46},			/* 0.06000=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1eb85, 0x1eb85232, 0x3fb1eb85, 0x1eb85232},			/* 0.07000=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb47ae1, 0x47ae14c1, 0x3fb47ae1, 0x47ae14c1},			/* 0.08000=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb70a3d, 0x70a3d750, 0x3fb70a3d, 0x70a3d750},			/* 0.09000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0x999999df, 0x3fb99999, 0x999999df},			/* 0.10000=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc28f5, 0xc28f5c6e, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11000=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbeb851, 0xeb851efd, 0x3fbeb851, 0xeb851efd},			/* 0.12000=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0a3d7, 0x0a3d70c6, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13000=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1eb85, 0x1eb8520e, 0x3fc1eb85, 0x1eb8520e},			/* 0.14000=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc33333, 0x33333356, 0x3fc33333, 0x33333356},			/* 0.15000=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc47ae1, 0x47ae149e, 0x3fc47ae1, 0x47ae149e},			/* 0.16000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5c28f, 0x5c28f5e6, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17000=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc70a3d, 0x70a3d72e, 0x3fc70a3d, 0x70a3d72e},			/* 0.18000=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc851eb, 0x851eb876, 0x3fc851eb, 0x851eb876},			/* 0.19000=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0x999999be, 0x3fc99999, 0x999999be},			/* 0.20000=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcae147, 0xae147b06, 0x3fcae147, 0xae147b06},			/* 0.21000=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcc28f5, 0xc28f5c4e, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22000=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcd70a3, 0xd70a3d96, 0x3fcd70a3, 0xd70a3d96},			/* 0.23000=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fceb851, 0xeb851ede, 0x3fceb851, 0xeb851ede},			/* 0.24000=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd00000, 0x00000013, 0x3fd00000, 0x00000013},			/* 0.25000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd0a3d7, 0x0a3d70b7, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26000=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd147ae, 0x147ae15b, 0x3fd147ae, 0x147ae15b},			/* 0.27000=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd1eb85, 0x1eb851ff, 0x3fd1eb85, 0x1eb851ff},			/* 0.28000=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd28f5c, 0x28f5c2a3, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29000=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x33333347, 0x3fd33333, 0x33333347},			/* 0.30000=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd3d70a, 0x3d70a3eb, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31000=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd47ae1, 0x47ae148f, 0x3fd47ae1, 0x47ae148f},			/* 0.32000=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd51eb8, 0x51eb8533, 0x3fd51eb8, 0x51eb8533},			/* 0.33000=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd5c28f, 0x5c28f5d7, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34000=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd66666, 0x6666667b, 0x3fd66666, 0x6666667b},			/* 0.35000=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd70a3d, 0x70a3d71f, 0x3fd70a3d, 0x70a3d71f},			/* 0.36000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd7ae14, 0x7ae147c3, 0x3fd7ae14, 0x7ae147c3},			/* 0.37000=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd851eb, 0x851eb867, 0x3fd851eb, 0x851eb867},			/* 0.38000=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd8f5c2, 0x8f5c290b, 0x3fd8f5c2, 0x8f5c290b},			/* 0.39000=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0x999999af, 0x3fd99999, 0x999999af},			/* 0.40000=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fda3d70, 0xa3d70a53, 0x3fda3d70, 0xa3d70a53},			/* 0.41000=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fdae147, 0xae147af7, 0x3fdae147, 0xae147af7},			/* 0.42000=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdb851e, 0xb851eb9b, 0x3fdb851e, 0xb851eb9b},			/* 0.43000=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdc28f5, 0xc28f5c3f, 0x3fdc28f5, 0xc28f5c3f},			/* 0.44000=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdccccc, 0xcccccce3, 0x3fdccccc, 0xcccccce3},			/* 0.45000=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdd70a3, 0xd70a3d87, 0x3fdd70a3, 0xd70a3d87},			/* 0.46000=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fde147a, 0xe147ae2b, 0x3fde147a, 0xe147ae2b},			/* 0.47000=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdeb851, 0xeb851ecf, 0x3fdeb851, 0xeb851ecf},			/* 0.48000=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fdf5c28, 0xf5c28f73, 0x3fdf5c28, 0xf5c28f73},			/* 0.49000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe00000, 0x0000000b, 0x3fe00000, 0x0000000b},			/* 0.50000=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe051eb, 0x851eb85d, 0x3fe051eb, 0x851eb85d},			/* 0.51000=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe0a3d7, 0x0a3d70af, 0x3fe0a3d7, 0x0a3d70af},			/* 0.52000=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe0f5c2, 0x8f5c2901, 0x3fe0f5c2, 0x8f5c2901},			/* 0.53000=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe147ae, 0x147ae153, 0x3fe147ae, 0x147ae153},			/* 0.54000=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe19999, 0x999999a5, 0x3fe19999, 0x999999a5},			/* 0.55000=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe1eb85, 0x1eb851f7, 0x3fe1eb85, 0x1eb851f7},			/* 0.56000=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe23d70, 0xa3d70a49, 0x3fe23d70, 0xa3d70a49},			/* 0.57000=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe28f5c, 0x28f5c29b, 0x3fe28f5c, 0x28f5c29b},			/* 0.58000=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe2e147, 0xae147aed, 0x3fe2e147, 0xae147aed},			/* 0.59000=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x3333333f, 0x3fe33333, 0x3333333f},			/* 0.60000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe3851e, 0xb851eb91, 0x3fe3851e, 0xb851eb91},			/* 0.61000=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe3d70a, 0x3d70a3e3, 0x3fe3d70a, 0x3d70a3e3},			/* 0.62000=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe428f5, 0xc28f5c35, 0x3fe428f5, 0xc28f5c35},			/* 0.63000=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe47ae1, 0x47ae1487, 0x3fe47ae1, 0x47ae1487},			/* 0.64000=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe4cccc, 0xccccccd9, 0x3fe4cccc, 0xccccccd9},			/* 0.65000=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe51eb8, 0x51eb852b, 0x3fe51eb8, 0x51eb852b},			/* 0.66000=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe570a3, 0xd70a3d7d, 0x3fe570a3, 0xd70a3d7d},			/* 0.67000=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe5c28f, 0x5c28f5cf, 0x3fe5c28f, 0x5c28f5cf},			/* 0.68000=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe6147a, 0xe147ae21, 0x3fe6147a, 0xe147ae21},			/* 0.69000=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x66666673, 0x3fe66666, 0x66666673},			/* 0.70000=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe6b851, 0xeb851ec5, 0x3fe6b851, 0xeb851ec5},			/* 0.71000=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe70a3d, 0x70a3d717, 0x3fe70a3d, 0x70a3d717},			/* 0.72000=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe75c28, 0xf5c28f69, 0x3fe75c28, 0xf5c28f69},			/* 0.73000=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe7ae14, 0x7ae147bb, 0x3fe7ae14, 0x7ae147bb},			/* 0.74000=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe80000, 0x0000000d, 0x3fe80000, 0x0000000d},			/* 0.75000=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe851eb, 0x851eb85f, 0x3fe851eb, 0x851eb85f},			/* 0.76000=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe8a3d7, 0x0a3d70b1, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.77000=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe8f5c2, 0x8f5c2903, 0x3fe8f5c2, 0x8f5c2903},			/* 0.78000=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe947ae, 0x147ae155, 0x3fe947ae, 0x147ae155},			/* 0.79000=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0x999999a7, 0x3fe99999, 0x999999a7},			/* 0.80000=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe9eb85, 0x1eb851f9, 0x3fe9eb85, 0x1eb851f9},			/* 0.81000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fea3d70, 0xa3d70a4b, 0x3fea3d70, 0xa3d70a4b},			/* 0.82000=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fea8f5c, 0x28f5c29d, 0x3fea8f5c, 0x28f5c29d},			/* 0.83000=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3feae147, 0xae147aef, 0x3feae147, 0xae147aef},			/* 0.84000=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3feb3333, 0x33333341, 0x3feb3333, 0x33333341},			/* 0.85000=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3feb851e, 0xb851eb93, 0x3feb851e, 0xb851eb93},			/* 0.86000=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3febd70a, 0x3d70a3e5, 0x3febd70a, 0x3d70a3e5},			/* 0.87000=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fec28f5, 0xc28f5c37, 0x3fec28f5, 0xc28f5c37},			/* 0.88000=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fec7ae1, 0x47ae1489, 0x3fec7ae1, 0x47ae1489},			/* 0.89000=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xccccccdb, 0x3feccccc, 0xccccccdb},			/* 0.90000=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fed1eb8, 0x51eb852d, 0x3fed1eb8, 0x51eb852d},			/* 0.91000=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fed70a3, 0xd70a3d7f, 0x3fed70a3, 0xd70a3d7f},			/* 0.92000=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fedc28f, 0x5c28f5d1, 0x3fedc28f, 0x5c28f5d1},			/* 0.93000=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fee147a, 0xe147ae23, 0x3fee147a, 0xe147ae23},			/* 0.94000=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fee6666, 0x66666675, 0x3fee6666, 0x66666675},			/* 0.95000=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3feeb851, 0xeb851ec7, 0x3feeb851, 0xeb851ec7},			/* 0.96000=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fef0a3d, 0x70a3d719, 0x3fef0a3d, 0x70a3d719},			/* 0.97000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fef5c28, 0xf5c28f6b, 0x3fef5c28, 0xf5c28f6b},			/* 0.98000=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fefae14, 0x7ae147bd, 0x3fefae14, 0x7ae147bd},			/* 0.99000=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000007, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3ff028f5, 0xc28f5c30, 0x3ff028f5, 0xc28f5c30},			/* 1.01000=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3ff051eb, 0x851eb859, 0x3ff051eb, 0x851eb859},			/* 1.02000=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ff07ae1, 0x47ae1482, 0x3ff07ae1, 0x47ae1482},			/* 1.03000=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3ff0a3d7, 0x0a3d70ab, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.04000=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ff0cccc, 0xccccccd4, 0x3ff0cccc, 0xccccccd4},			/* 1.05000=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3ff0f5c2, 0x8f5c28fd, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.06000=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3ff11eb8, 0x51eb8526, 0x3ff11eb8, 0x51eb8526},			/* 1.07000=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3ff147ae, 0x147ae14f, 0x3ff147ae, 0x147ae14f},			/* 1.08000=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3ff170a3, 0xd70a3d78, 0x3ff170a3, 0xd70a3d78},			/* 1.09000=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0x999999a1, 0x3ff19999, 0x999999a1},			/* 1.10000=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3ff1c28f, 0x5c28f5ca, 0x3ff1c28f, 0x5c28f5ca},			/* 1.11000=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3ff1eb85, 0x1eb851f3, 0x3ff1eb85, 0x1eb851f3},			/* 1.12000=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ff2147a, 0xe147ae1c, 0x3ff2147a, 0xe147ae1c},			/* 1.13000=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3ff23d70, 0xa3d70a45, 0x3ff23d70, 0xa3d70a45},			/* 1.14000=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ff26666, 0x6666666e, 0x3ff26666, 0x6666666e},			/* 1.15000=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ff28f5c, 0x28f5c297, 0x3ff28f5c, 0x28f5c297},			/* 1.16000=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3ff2b851, 0xeb851ec0, 0x3ff2b851, 0xeb851ec0},			/* 1.17000=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3ff2e147, 0xae147ae9, 0x3ff2e147, 0xae147ae9},			/* 1.18000=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3ff30a3d, 0x70a3d712, 0x3ff30a3d, 0x70a3d712},			/* 1.19000=f(1.19000)*/
-{64, 0,123,__LINE__, 0x401921fb, 0x54442d18, 0xc01921fb, 0x54442d18},			/* 6.28318=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x4012d97c, 0x7f3321d2, 0xc012d97c, 0x7f3321d2},			/* 4.71238=f(-4.71238)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x54442d18, 0xc00921fb, 0x54442d18},			/* 3.14159=f(-3.14159)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x54442d18, 0xbff921fb, 0x54442d18},			/* 1.57079=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x54442d18, 0x3ff921fb, 0x54442d18},			/* 1.57079=f(1.57079)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x54442d18, 0x400921fb, 0x54442d18},			/* 3.14159=f(3.14159)*/
-{64, 0,123,__LINE__, 0x4012d97c, 0x7f3321d2, 0x4012d97c, 0x7f3321d2},			/* 4.71238=f(4.71238)*/
-{64, 0,123,__LINE__, 0x403e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* 30.0000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x403c4ccc, 0xcccccccd, 0xc03c4ccc, 0xcccccccd},			/* 28.3000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x403a9999, 0x9999999a, 0xc03a9999, 0x9999999a},			/* 26.6000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x4038e666, 0x66666667, 0xc038e666, 0x66666667},			/* 24.9000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x40373333, 0x33333334, 0xc0373333, 0x33333334},			/* 23.2000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x40358000, 0x00000001, 0xc0358000, 0x00000001},			/* 21.5000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0x4033cccc, 0xccccccce, 0xc033cccc, 0xccccccce},			/* 19.8000=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x40321999, 0x9999999b, 0xc0321999, 0x9999999b},			/* 18.1000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x40306666, 0x66666668, 0xc0306666, 0x66666668},			/* 16.4000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x402d6666, 0x6666666a, 0xc02d6666, 0x6666666a},			/* 14.7000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x402a0000, 0x00000004, 0xc02a0000, 0x00000004},			/* 13.0000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x40269999, 0x9999999e, 0xc0269999, 0x9999999e},			/* 11.3000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x40233333, 0x33333338, 0xc0233333, 0x33333338},			/* 9.60000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x401f9999, 0x999999a3, 0xc01f9999, 0x999999a3},			/* 7.90000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x4018cccc, 0xccccccd6, 0xc018cccc, 0xccccccd6},			/* 6.20000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x40120000, 0x00000009, 0xc0120000, 0x00000009},			/* 4.50000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x40066666, 0x66666678, 0xc0066666, 0x66666678},			/* 2.80000=f(-2.80000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0x999999bd, 0xbff19999, 0x999999bd},			/* 1.10000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x333332ec, 0x3fe33333, 0x333332ec},			/* 0.60000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x40026666, 0x66666654, 0x40026666, 0x66666654},			/* 2.30000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x400fffff, 0xffffffee, 0x400fffff, 0xffffffee},			/* 4.00000=f(4.00000)*/
-{64, 0,123,__LINE__, 0x4016cccc, 0xccccccc4, 0x4016cccc, 0xccccccc4},			/* 5.70000=f(5.70000)*/
-{64, 0,123,__LINE__, 0x401d9999, 0x99999991, 0x401d9999, 0x99999991},			/* 7.40000=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40223333, 0x3333332f, 0x40223333, 0x3333332f},			/* 9.10000=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40259999, 0x99999995, 0x40259999, 0x99999995},			/* 10.8000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x4028ffff, 0xfffffffb, 0x4028ffff, 0xfffffffb},			/* 12.5000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x402c6666, 0x66666661, 0x402c6666, 0x66666661},			/* 14.2000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x402fcccc, 0xccccccc7, 0x402fcccc, 0xccccccc7},			/* 15.9000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x40319999, 0x99999997, 0x40319999, 0x99999997},			/* 17.6000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x40334ccc, 0xccccccca, 0x40334ccc, 0xccccccca},			/* 19.3000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x4034ffff, 0xfffffffd, 0x4034ffff, 0xfffffffd},			/* 21.0000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x4036b333, 0x33333330, 0x4036b333, 0x33333330},			/* 22.7000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x40386666, 0x66666663, 0x40386666, 0x66666663},			/* 24.4000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x403a1999, 0x99999996, 0x403a1999, 0x99999996},			/* 26.1000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x403bcccc, 0xccccccc9, 0x403bcccc, 0xccccccc9},			/* 27.8000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x403d7fff, 0xfffffffc, 0x403d7fff, 0xfffffffc},			/* 29.5000=f(29.5000)*/
-0,};
-test_fabs(m)   {run_vector_1(m,fabs_vec,(char *)(fabs),"fabs","dd");   }	
diff --git a/newlib/libm/test/fabsf_vec.c b/newlib/libm/test/fabsf_vec.c
deleted file mode 100644
index 9c8e122ff..000000000
--- a/newlib/libm/test/fabsf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type fabsf_vec[] = {
-{64, 0,123,__LINE__, 0x3ff33333, 0x40000000, 0xbff33333, 0x33333333},			/* 1.20000=f(-1.20000)*/
-{64, 0,123,__LINE__, 0x3ff30a3d, 0x80000000, 0xbff30a3d, 0x70a3d70a},			/* 1.19000=f(-1.19000)*/
-{64, 0,123,__LINE__, 0x3ff2e147, 0xa0000000, 0xbff2e147, 0xae147ae1},			/* 1.18000=f(-1.18000)*/
-{64, 0,123,__LINE__, 0x3ff2b851, 0xe0000000, 0xbff2b851, 0xeb851eb8},			/* 1.17000=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3ff28f5c, 0x20000000, 0xbff28f5c, 0x28f5c28f},			/* 1.16000=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3ff26666, 0x60000000, 0xbff26666, 0x66666666},			/* 1.15000=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3ff23d70, 0xa0000000, 0xbff23d70, 0xa3d70a3d},			/* 1.14000=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3ff2147a, 0xe0000000, 0xbff2147a, 0xe147ae14},			/* 1.13000=f(-1.13000)*/
-{64, 0,123,__LINE__, 0x3ff1eb85, 0x20000000, 0xbff1eb85, 0x1eb851eb},			/* 1.12000=f(-1.12000)*/
-{64, 0,123,__LINE__, 0x3ff1c28f, 0x60000000, 0xbff1c28f, 0x5c28f5c2},			/* 1.11000=f(-1.11000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0xa0000000, 0xbff19999, 0x99999999},			/* 1.10000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3ff170a3, 0xe0000000, 0xbff170a3, 0xd70a3d70},			/* 1.09000=f(-1.09000)*/
-{64, 0,123,__LINE__, 0x3ff147ae, 0x20000000, 0xbff147ae, 0x147ae147},			/* 1.08000=f(-1.08000)*/
-{64, 0,123,__LINE__, 0x3ff11eb8, 0x60000000, 0xbff11eb8, 0x51eb851e},			/* 1.07000=f(-1.07000)*/
-{64, 0,123,__LINE__, 0x3ff0f5c2, 0x80000000, 0xbff0f5c2, 0x8f5c28f5},			/* 1.06000=f(-1.06000)*/
-{64, 0,123,__LINE__, 0x3ff0cccc, 0xc0000000, 0xbff0cccc, 0xcccccccc},			/* 1.05000=f(-1.05000)*/
-{64, 0,123,__LINE__, 0x3ff0a3d7, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 1.04000=f(-1.04000)*/
-{64, 0,123,__LINE__, 0x3ff07ae1, 0x40000000, 0xbff07ae1, 0x47ae147a},			/* 1.03000=f(-1.03000)*/
-{64, 0,123,__LINE__, 0x3ff051eb, 0x80000000, 0xbff051eb, 0x851eb851},			/* 1.02000=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3ff028f5, 0xc0000000, 0xbff028f5, 0xc28f5c28},			/* 1.01000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 1.00000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x3fefae14, 0x80000000, 0xbfefae14, 0x7ae147ac},			/* 0.99000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3fef5c29, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 0.98000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3fef0a3d, 0x80000000, 0xbfef0a3d, 0x70a3d708},			/* 0.97000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3feeb851, 0xe0000000, 0xbfeeb851, 0xeb851eb6},			/* 0.95999=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x3fee6666, 0x60000000, 0xbfee6666, 0x66666664},			/* 0.94999=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3fee147a, 0xe0000000, 0xbfee147a, 0xe147ae12},			/* 0.94000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x3fedc28f, 0x60000000, 0xbfedc28f, 0x5c28f5c0},			/* 0.93000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x3fed70a3, 0xe0000000, 0xbfed70a3, 0xd70a3d6e},			/* 0.92000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x3fed1eb8, 0x60000000, 0xbfed1eb8, 0x51eb851c},			/* 0.91000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xc0000000, 0xbfeccccc, 0xccccccca},			/* 0.89999=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x3fec7ae1, 0x40000000, 0xbfec7ae1, 0x47ae1478},			/* 0.88999=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x3fec28f5, 0xc0000000, 0xbfec28f5, 0xc28f5c26},			/* 0.88000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3febd70a, 0x40000000, 0xbfebd70a, 0x3d70a3d4},			/* 0.87000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x3feb851e, 0xc0000000, 0xbfeb851e, 0xb851eb82},			/* 0.86000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x3feb3333, 0x40000000, 0xbfeb3333, 0x33333330},			/* 0.85000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x3feae147, 0xa0000000, 0xbfeae147, 0xae147ade},			/* 0.83999=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x3fea8f5c, 0x20000000, 0xbfea8f5c, 0x28f5c28c},			/* 0.82999=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fea3d70, 0xa0000000, 0xbfea3d70, 0xa3d70a3a},			/* 0.81999=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3fe9eb85, 0x20000000, 0xbfe9eb85, 0x1eb851e8},			/* 0.81000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0xa0000000, 0xbfe99999, 0x99999996},			/* 0.80000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3fe947ae, 0x20000000, 0xbfe947ae, 0x147ae144},			/* 0.79000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3fe8f5c2, 0x80000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.77999=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3fe8a3d7, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.76999=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3fe851eb, 0x80000000, 0xbfe851eb, 0x851eb84e},			/* 0.75999=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x3fe80000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 0.75000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x3fe7ae14, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* 0.74000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3fe75c29, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 0.73000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3fe70a3d, 0x80000000, 0xbfe70a3d, 0x70a3d706},			/* 0.72000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3fe6b851, 0xe0000000, 0xbfe6b851, 0xeb851eb4},			/* 0.70999=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x60000000, 0xbfe66666, 0x66666662},			/* 0.69999=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x3fe6147a, 0xe0000000, 0xbfe6147a, 0xe147ae10},			/* 0.69000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3fe5c28f, 0x60000000, 0xbfe5c28f, 0x5c28f5be},			/* 0.68000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3fe570a3, 0xe0000000, 0xbfe570a3, 0xd70a3d6c},			/* 0.67000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3fe51eb8, 0x60000000, 0xbfe51eb8, 0x51eb851a},			/* 0.66000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x3fe4cccc, 0xc0000000, 0xbfe4cccc, 0xccccccc8},			/* 0.64999=f(-0.65000)*/
-{64, 0,123,__LINE__, 0x3fe47ae1, 0x40000000, 0xbfe47ae1, 0x47ae1476},			/* 0.63999=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3fe428f5, 0xc0000000, 0xbfe428f5, 0xc28f5c24},			/* 0.63000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3fe3d70a, 0x40000000, 0xbfe3d70a, 0x3d70a3d2},			/* 0.62000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3fe3851e, 0xc0000000, 0xbfe3851e, 0xb851eb80},			/* 0.61000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0xbfe33333, 0x3333332e},			/* 0.60000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fe2e147, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* 0.58999=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3fe28f5c, 0x20000000, 0xbfe28f5c, 0x28f5c28a},			/* 0.57999=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x3fe23d70, 0xa0000000, 0xbfe23d70, 0xa3d70a38},			/* 0.56999=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3fe1eb85, 0x20000000, 0xbfe1eb85, 0x1eb851e6},			/* 0.56000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3fe19999, 0xa0000000, 0xbfe19999, 0x99999994},			/* 0.55000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x3fe147ae, 0x20000000, 0xbfe147ae, 0x147ae142},			/* 0.54000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3fe0f5c2, 0x80000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.52999=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3fe0a3d7, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 0.51999=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x3fe051eb, 0x80000000, 0xbfe051eb, 0x851eb84c},			/* 0.50999=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3fe00000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 0.50000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3fdf5c29, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 0.49000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x3fdeb851, 0xe0000000, 0xbfdeb851, 0xeb851eac},			/* 0.47999=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fde147a, 0xe0000000, 0xbfde147a, 0xe147ae08},			/* 0.47000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3fdd70a3, 0xe0000000, 0xbfdd70a3, 0xd70a3d64},			/* 0.46000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0x3fdccccc, 0xc0000000, 0xbfdccccc, 0xccccccc0},			/* 0.44999=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fdc28f5, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c},			/* 0.44000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3fdb851e, 0xc0000000, 0xbfdb851e, 0xb851eb78},			/* 0.43000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3fdae147, 0xa0000000, 0xbfdae147, 0xae147ad4},			/* 0.41999=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3fda3d70, 0xa0000000, 0xbfda3d70, 0xa3d70a30},			/* 0.41000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0xa0000000, 0xbfd99999, 0x9999998c},			/* 0.40000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3fd8f5c2, 0x80000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.38999=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3fd851eb, 0x80000000, 0xbfd851eb, 0x851eb844},			/* 0.38000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3fd7ae14, 0x80000000, 0xbfd7ae14, 0x7ae147a0},			/* 0.37000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3fd70a3d, 0x80000000, 0xbfd70a3d, 0x70a3d6fc},			/* 0.36000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3fd66666, 0x60000000, 0xbfd66666, 0x66666658},			/* 0.34999=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3fd5c28f, 0x60000000, 0xbfd5c28f, 0x5c28f5b4},			/* 0.34000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3fd51eb8, 0x60000000, 0xbfd51eb8, 0x51eb8510},			/* 0.33000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3fd47ae1, 0x40000000, 0xbfd47ae1, 0x47ae146c},			/* 0.31999=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3fd3d70a, 0x40000000, 0xbfd3d70a, 0x3d70a3c8},			/* 0.31000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x40000000, 0xbfd33333, 0x33333324},			/* 0.30000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3fd28f5c, 0x20000000, 0xbfd28f5c, 0x28f5c280},			/* 0.28999=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3fd1eb85, 0x20000000, 0xbfd1eb85, 0x1eb851dc},			/* 0.28000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3fd147ae, 0x20000000, 0xbfd147ae, 0x147ae138},			/* 0.27000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3fd0a3d7, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 0.25999=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3fd00000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 0.25000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3fceb851, 0xe0000000, 0xbfceb851, 0xeb851e98},			/* 0.23999=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3fcd70a3, 0xe0000000, 0xbfcd70a3, 0xd70a3d50},			/* 0.23000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3fcc28f5, 0xc0000000, 0xbfcc28f5, 0xc28f5c08},			/* 0.22000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3fcae147, 0xa0000000, 0xbfcae147, 0xae147ac0},			/* 0.20999=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0xa0000000, 0xbfc99999, 0x99999978},			/* 0.20000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3fc851eb, 0x80000000, 0xbfc851eb, 0x851eb830},			/* 0.19000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3fc70a3d, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* 0.18000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3fc5c28f, 0x60000000, 0xbfc5c28f, 0x5c28f5a0},			/* 0.17000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3fc47ae1, 0x40000000, 0xbfc47ae1, 0x47ae1458},			/* 0.16000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3fc33333, 0x40000000, 0xbfc33333, 0x33333310},			/* 0.15000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3fc1eb85, 0x20000000, 0xbfc1eb85, 0x1eb851c8},			/* 0.14000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3fc0a3d7, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 0.13000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3fbeb851, 0xe0000000, 0xbfbeb851, 0xeb851e71},			/* 0.12000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3fbc28f5, 0xc0000000, 0xbfbc28f5, 0xc28f5be2},			/* 0.11000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0xa0000000, 0xbfb99999, 0x99999953},			/* 0.10000=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3fb70a3d, 0x80000000, 0xbfb70a3d, 0x70a3d6c4},			/* 0.09000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3fb47ae1, 0x40000000, 0xbfb47ae1, 0x47ae1435},			/* 0.07999=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x3fb1eb85, 0x20000000, 0xbfb1eb85, 0x1eb851a6},			/* 0.07000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3faeb851, 0xe0000000, 0xbfaeb851, 0xeb851e2d},			/* 0.05999=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3fa99999, 0xa0000000, 0xbfa99999, 0x9999990e},			/* 0.05000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3fa47ae1, 0x40000000, 0xbfa47ae1, 0x47ae13ef},			/* 0.03999=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3f9eb851, 0xe0000000, 0xbf9eb851, 0xeb851da0},			/* 0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3f947ae1, 0x40000000, 0xbf947ae1, 0x47ae1362},			/* 0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3f847ae1, 0x40000000, 0xbf847ae1, 0x47ae1249},			/* 0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847ae1, 0x40000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947ae1, 0x40000000, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb851, 0xe0000000, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47ae1, 0x40000000, 0x3fa47ae1, 0x47ae1508},			/* 0.03999=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99999, 0xa0000000, 0x3fa99999, 0x99999a27},			/* 0.05000=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faeb851, 0xe0000000, 0x3faeb851, 0xeb851f46},			/* 0.05999=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1eb85, 0x20000000, 0x3fb1eb85, 0x1eb85232},			/* 0.07000=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb47ae1, 0x40000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.07999=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb70a3d, 0x80000000, 0x3fb70a3d, 0x70a3d750},			/* 0.09000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0xa0000000, 0x3fb99999, 0x999999df},			/* 0.10000=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc28f5, 0xc0000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11000=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbeb851, 0xe0000000, 0x3fbeb851, 0xeb851efd},			/* 0.12000=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0a3d7, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13000=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1eb85, 0x20000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.14000=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc33333, 0x40000000, 0x3fc33333, 0x33333356},			/* 0.15000=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc47ae1, 0x40000000, 0x3fc47ae1, 0x47ae149e},			/* 0.16000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5c28f, 0x60000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17000=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc70a3d, 0x80000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.18000=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc851eb, 0x80000000, 0x3fc851eb, 0x851eb876},			/* 0.19000=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0xa0000000, 0x3fc99999, 0x999999be},			/* 0.20000=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcae147, 0xa0000000, 0x3fcae147, 0xae147b06},			/* 0.20999=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcc28f5, 0xc0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22000=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcd70a3, 0xe0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.23000=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fceb851, 0xe0000000, 0x3fceb851, 0xeb851ede},			/* 0.23999=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd00000, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.25000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd0a3d7, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25999=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd147ae, 0x20000000, 0x3fd147ae, 0x147ae15b},			/* 0.27000=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd1eb85, 0x20000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.28000=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd28f5c, 0x20000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28999=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x40000000, 0x3fd33333, 0x33333347},			/* 0.30000=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd3d70a, 0x40000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31000=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd47ae1, 0x40000000, 0x3fd47ae1, 0x47ae148f},			/* 0.31999=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd51eb8, 0x60000000, 0x3fd51eb8, 0x51eb8533},			/* 0.33000=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd5c28f, 0x60000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34000=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd66666, 0x60000000, 0x3fd66666, 0x6666667b},			/* 0.34999=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd70a3d, 0x80000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.36000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd7ae14, 0x80000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.37000=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd851eb, 0x80000000, 0x3fd851eb, 0x851eb867},			/* 0.38000=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd8f5c2, 0x80000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.38999=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0xa0000000, 0x3fd99999, 0x999999af},			/* 0.40000=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fda3d70, 0xa0000000, 0x3fda3d70, 0xa3d70a53},			/* 0.41000=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fdae147, 0xa0000000, 0x3fdae147, 0xae147af7},			/* 0.41999=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdb851e, 0xc0000000, 0x3fdb851e, 0xb851eb9b},			/* 0.43000=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdc28f5, 0xc0000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.44000=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdccccc, 0xc0000000, 0x3fdccccc, 0xcccccce3},			/* 0.44999=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdd70a3, 0xe0000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.46000=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fde147a, 0xe0000000, 0x3fde147a, 0xe147ae2b},			/* 0.47000=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdeb851, 0xe0000000, 0x3fdeb851, 0xeb851ecf},			/* 0.47999=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fdf5c29, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.49000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe00000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 0.50000=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe051eb, 0x80000000, 0x3fe051eb, 0x851eb85d},			/* 0.50999=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe0a3d7, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.51999=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe0f5c2, 0x80000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.52999=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe147ae, 0x20000000, 0x3fe147ae, 0x147ae153},			/* 0.54000=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe19999, 0xa0000000, 0x3fe19999, 0x999999a5},			/* 0.55000=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe1eb85, 0x20000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.56000=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe23d70, 0xa0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.56999=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe28f5c, 0x20000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.57999=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe2e147, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 0.58999=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0x3fe33333, 0x3333333f},			/* 0.60000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe3851e, 0xc0000000, 0x3fe3851e, 0xb851eb91},			/* 0.61000=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe3d70a, 0x40000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.62000=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe428f5, 0xc0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.63000=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe47ae1, 0x40000000, 0x3fe47ae1, 0x47ae1487},			/* 0.63999=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe4cccc, 0xc0000000, 0x3fe4cccc, 0xccccccd9},			/* 0.64999=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe51eb8, 0x60000000, 0x3fe51eb8, 0x51eb852b},			/* 0.66000=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe570a3, 0xe0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.67000=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe5c28f, 0x60000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.68000=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe6147a, 0xe0000000, 0x3fe6147a, 0xe147ae21},			/* 0.69000=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x60000000, 0x3fe66666, 0x66666673},			/* 0.69999=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe6b851, 0xe0000000, 0x3fe6b851, 0xeb851ec5},			/* 0.70999=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe70a3d, 0x80000000, 0x3fe70a3d, 0x70a3d717},			/* 0.72000=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe75c29, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 0.73000=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe7ae14, 0x80000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.74000=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe80000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 0.75000=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe851eb, 0x80000000, 0x3fe851eb, 0x851eb85f},			/* 0.75999=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe8a3d7, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.76999=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe8f5c2, 0x80000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.77999=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe947ae, 0x20000000, 0x3fe947ae, 0x147ae155},			/* 0.79000=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0xa0000000, 0x3fe99999, 0x999999a7},			/* 0.80000=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe9eb85, 0x20000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.81000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fea3d70, 0xa0000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.81999=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fea8f5c, 0x20000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.82999=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3feae147, 0xa0000000, 0x3feae147, 0xae147aef},			/* 0.83999=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3feb3333, 0x40000000, 0x3feb3333, 0x33333341},			/* 0.85000=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3feb851e, 0xc0000000, 0x3feb851e, 0xb851eb93},			/* 0.86000=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3febd70a, 0x40000000, 0x3febd70a, 0x3d70a3e5},			/* 0.87000=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fec28f5, 0xc0000000, 0x3fec28f5, 0xc28f5c37},			/* 0.88000=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fec7ae1, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 0.88999=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xc0000000, 0x3feccccc, 0xccccccdb},			/* 0.89999=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fed1eb8, 0x60000000, 0x3fed1eb8, 0x51eb852d},			/* 0.91000=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fed70a3, 0xe0000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.92000=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fedc28f, 0x60000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.93000=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fee147a, 0xe0000000, 0x3fee147a, 0xe147ae23},			/* 0.94000=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fee6666, 0x60000000, 0x3fee6666, 0x66666675},			/* 0.94999=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3feeb851, 0xe0000000, 0x3feeb851, 0xeb851ec7},			/* 0.95999=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fef0a3d, 0x80000000, 0x3fef0a3d, 0x70a3d719},			/* 0.97000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fef5c29, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.98000=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fefae14, 0x80000000, 0x3fefae14, 0x7ae147bd},			/* 0.99000=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3ff028f5, 0xc0000000, 0x3ff028f5, 0xc28f5c30},			/* 1.01000=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3ff051eb, 0x80000000, 0x3ff051eb, 0x851eb859},			/* 1.02000=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ff07ae1, 0x40000000, 0x3ff07ae1, 0x47ae1482},			/* 1.03000=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3ff0a3d7, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.04000=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ff0cccc, 0xc0000000, 0x3ff0cccc, 0xccccccd4},			/* 1.05000=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3ff0f5c2, 0x80000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.06000=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3ff11eb8, 0x60000000, 0x3ff11eb8, 0x51eb8526},			/* 1.07000=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3ff147ae, 0x20000000, 0x3ff147ae, 0x147ae14f},			/* 1.08000=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3ff170a3, 0xe0000000, 0x3ff170a3, 0xd70a3d78},			/* 1.09000=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0xa0000000, 0x3ff19999, 0x999999a1},			/* 1.10000=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3ff1c28f, 0x60000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.11000=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3ff1eb85, 0x20000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.12000=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ff2147a, 0xe0000000, 0x3ff2147a, 0xe147ae1c},			/* 1.13000=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3ff23d70, 0xa0000000, 0x3ff23d70, 0xa3d70a45},			/* 1.14000=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ff26666, 0x60000000, 0x3ff26666, 0x6666666e},			/* 1.15000=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ff28f5c, 0x20000000, 0x3ff28f5c, 0x28f5c297},			/* 1.16000=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3ff2b851, 0xe0000000, 0x3ff2b851, 0xeb851ec0},			/* 1.17000=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3ff2e147, 0xa0000000, 0x3ff2e147, 0xae147ae9},			/* 1.18000=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3ff30a3d, 0x80000000, 0x3ff30a3d, 0x70a3d712},			/* 1.19000=f(1.19000)*/
-{64, 0,123,__LINE__, 0x401921fb, 0x60000000, 0xc01921fb, 0x54442d18},			/* 6.28318=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x4012d97c, 0x80000000, 0xc012d97c, 0x7f3321d2},			/* 4.71238=f(-4.71238)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x60000000, 0xc00921fb, 0x54442d18},			/* 3.14159=f(-3.14159)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0xbff921fb, 0x54442d18},			/* 1.57079=f(-1.57079)*/
-{ 0, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0x3ff921fb, 0x54442d18},			/* 1.57079=f(1.57079)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x60000000, 0x400921fb, 0x54442d18},			/* 3.14159=f(3.14159)*/
-{64, 0,123,__LINE__, 0x4012d97c, 0x80000000, 0x4012d97c, 0x7f3321d2},			/* 4.71238=f(4.71238)*/
-{64, 0,123,__LINE__, 0x403e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* 30.0000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x403c4ccc, 0xc0000000, 0xc03c4ccc, 0xcccccccd},			/* 28.2999=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x403a9999, 0xa0000000, 0xc03a9999, 0x9999999a},			/* 26.6000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x4038e666, 0x60000000, 0xc038e666, 0x66666667},			/* 24.9000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x40373333, 0x40000000, 0xc0373333, 0x33333334},			/* 23.2000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x40358000, 0x00000000, 0xc0358000, 0x00000001},			/* 21.5000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0x4033cccc, 0xc0000000, 0xc033cccc, 0xccccccce},			/* 19.7999=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x40321999, 0xa0000000, 0xc0321999, 0x9999999b},			/* 18.1000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x40306666, 0x60000000, 0xc0306666, 0x66666668},			/* 16.4000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x402d6666, 0x60000000, 0xc02d6666, 0x6666666a},			/* 14.7000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x402a0000, 0x00000000, 0xc02a0000, 0x00000004},			/* 13.0000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x40269999, 0xa0000000, 0xc0269999, 0x9999999e},			/* 11.3000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x40233333, 0x40000000, 0xc0233333, 0x33333338},			/* 9.60000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x401f9999, 0xa0000000, 0xc01f9999, 0x999999a3},			/* 7.90000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x4018cccc, 0xc0000000, 0xc018cccc, 0xccccccd6},			/* 6.20000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x40120000, 0x00000000, 0xc0120000, 0x00000009},			/* 4.50000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x40066666, 0x60000000, 0xc0066666, 0x66666678},			/* 2.80000=f(-2.80000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0xa0000000, 0xbff19999, 0x999999bd},			/* 1.10000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0x3fe33333, 0x333332ec},			/* 0.60000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x40026666, 0x60000000, 0x40026666, 0x66666654},			/* 2.30000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400fffff, 0xffffffee},			/* 4.00000=f(4.00000)*/
-{64, 0,123,__LINE__, 0x4016cccc, 0xc0000000, 0x4016cccc, 0xccccccc4},			/* 5.70000=f(5.70000)*/
-{64, 0,123,__LINE__, 0x401d9999, 0xa0000000, 0x401d9999, 0x99999991},			/* 7.40000=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40223333, 0x40000000, 0x40223333, 0x3333332f},			/* 9.10000=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40259999, 0xa0000000, 0x40259999, 0x99999995},			/* 10.8000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x40290000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 12.5000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x402c6666, 0x60000000, 0x402c6666, 0x66666661},			/* 14.2000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x402fcccc, 0xc0000000, 0x402fcccc, 0xccccccc7},			/* 15.9000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x40319999, 0xa0000000, 0x40319999, 0x99999997},			/* 17.6000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x40334ccc, 0xc0000000, 0x40334ccc, 0xccccccca},			/* 19.2999=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40350000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 21.0000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x4036b333, 0x40000000, 0x4036b333, 0x33333330},			/* 22.7000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x40386666, 0x60000000, 0x40386666, 0x66666663},			/* 24.4000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x403a1999, 0xa0000000, 0x403a1999, 0x99999996},			/* 26.1000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x403bcccc, 0xc0000000, 0x403bcccc, 0xccccccc9},			/* 27.7999=f(27.8000)*/
-{64, 0,123,__LINE__, 0x403d8000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 29.5000=f(29.5000)*/
-0,};
-test_fabsf(m)   {run_vector_1(m,fabsf_vec,(char *)(fabsf),"fabsf","ff");   }	
diff --git a/newlib/libm/test/floor_vec.c b/newlib/libm/test/floor_vec.c
deleted file mode 100644
index 2272a7dfa..000000000
--- a/newlib/libm/test/floor_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type floor_vec[] = {
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff33333, 0x33333333},			/* -2.00000=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* -2.00000=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* -2.00000=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -2.00000=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* -2.00000=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff26666, 0x66666666},			/* -2.00000=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* -2.00000=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* -2.00000=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -2.00000=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -2.00000=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff19999, 0x99999999},			/* -2.00000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* -2.00000=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff147ae, 0x147ae147},			/* -2.00000=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* -2.00000=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* -2.00000=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* -2.00000=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* -2.00000=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* -2.00000=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff051eb, 0x851eb851},			/* -2.00000=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -2.00000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* -1.00000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* -1.00000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* -1.00000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* -1.00000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* -1.00000=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfee6666, 0x66666664},			/* -1.00000=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* -1.00000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* -1.00000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* -1.00000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* -1.00000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* -1.00000=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* -1.00000=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* -1.00000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* -1.00000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* -1.00000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeb3333, 0x33333330},			/* -1.00000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeae147, 0xae147ade},			/* -1.00000=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* -1.00000=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* -1.00000=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* -1.00000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe99999, 0x99999996},			/* -1.00000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* -1.00000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -1.00000=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -1.00000=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* -1.00000=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* -1.00000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* -1.00000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* -1.00000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* -1.00000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* -1.00000=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe66666, 0x66666662},			/* -1.00000=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* -1.00000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* -1.00000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* -1.00000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* -1.00000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* -1.00000=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* -1.00000=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* -1.00000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* -1.00000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* -1.00000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe33333, 0x3333332e},			/* -1.00000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* -1.00000=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* -1.00000=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* -1.00000=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* -1.00000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe19999, 0x99999994},			/* -1.00000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* -1.00000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -1.00000=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* -1.00000=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* -1.00000=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* -1.00000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* -1.00000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* -1.00000=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* -1.00000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* -1.00000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* -1.00000=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* -1.00000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* -1.00000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* -1.00000=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* -1.00000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd99999, 0x9999998c},			/* -1.00000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -1.00000=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* -1.00000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* -1.00000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* -1.00000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd66666, 0x66666658},			/* -1.00000=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* -1.00000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* -1.00000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* -1.00000=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* -1.00000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd33333, 0x33333324},			/* -1.00000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* -1.00000=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* -1.00000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* -1.00000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* -1.00000=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* -1.00000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* -1.00000=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* -1.00000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* -1.00000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* -1.00000=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc99999, 0x99999978},			/* -1.00000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* -1.00000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* -1.00000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* -1.00000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* -1.00000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc33333, 0x33333310},			/* -1.00000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* -1.00000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* -1.00000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* -1.00000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* -1.00000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb99999, 0x99999953},			/* -1.00000=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* -1.00000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* -1.00000=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* -1.00000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* -1.00000=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfa99999, 0x9999990e},			/* -1.00000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* -1.00000=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* -1.00000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* -1.00000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* -1.00000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3cd19000, 0x00000000},			/* 0.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 0.00000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 0.00000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 0.00000=f(0.04000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 0.00000=f(0.05000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 0.00000=f(0.06000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 0.00000=f(0.07000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.00000=f(0.08000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 0.00000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb99999, 0x999999df},			/* 0.00000=f(0.10000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.00000=f(0.11000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 0.00000=f(0.12000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.00000=f(0.13000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.00000=f(0.14000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc33333, 0x33333356},			/* 0.00000=f(0.15000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 0.00000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.00000=f(0.17000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.00000=f(0.18000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 0.00000=f(0.19000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc99999, 0x999999be},			/* 0.00000=f(0.20000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 0.00000=f(0.21000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.00000=f(0.22000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.00000=f(0.23000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 0.00000=f(0.24000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.00000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.00000=f(0.26000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 0.00000=f(0.27000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.00000=f(0.28000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.00000=f(0.29000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd33333, 0x33333347},			/* 0.00000=f(0.30000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.00000=f(0.31000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 0.00000=f(0.32000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.00000=f(0.33000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.00000=f(0.34000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 0.00000=f(0.35000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.00000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.00000=f(0.37000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 0.00000=f(0.38000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.00000=f(0.39000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd99999, 0x999999af},			/* 0.00000=f(0.40000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 0.00000=f(0.41000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 0.00000=f(0.42000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 0.00000=f(0.43000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.00000=f(0.44000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 0.00000=f(0.45000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.00000=f(0.46000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 0.00000=f(0.47000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 0.00000=f(0.48000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.00000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 0.00000=f(0.50000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 0.00000=f(0.51000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.00000=f(0.52000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.00000=f(0.53000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 0.00000=f(0.54000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 0.00000=f(0.55000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.00000=f(0.56000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 0.00000=f(0.57000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.00000=f(0.58000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 0.00000=f(0.59000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.00000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 0.00000=f(0.61000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.00000=f(0.62000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 0.00000=f(0.63000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 0.00000=f(0.64000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.00000=f(0.65000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.00000=f(0.66000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.00000=f(0.67000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.00000=f(0.68000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 0.00000=f(0.69000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe66666, 0x66666673},			/* 0.00000=f(0.70000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 0.00000=f(0.71000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 0.00000=f(0.72000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 0.00000=f(0.73000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.00000=f(0.74000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 0.00000=f(0.75000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 0.00000=f(0.76000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.00000=f(0.77000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.00000=f(0.78000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 0.00000=f(0.79000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 0.00000=f(0.80000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.00000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.00000=f(0.82000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.00000=f(0.83000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feae147, 0xae147aef},			/* 0.00000=f(0.84000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feb3333, 0x33333341},			/* 0.00000=f(0.85000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 0.00000=f(0.86000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 0.00000=f(0.87000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 0.00000=f(0.88000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 0.00000=f(0.89000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 0.00000=f(0.90000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 0.00000=f(0.91000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.00000=f(0.92000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.00000=f(0.93000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 0.00000=f(0.94000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fee6666, 0x66666675},			/* 0.00000=f(0.95000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 0.00000=f(0.96000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 0.00000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.00000=f(0.98000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 0.00000=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 1.00000=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 1.00000=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 1.00000=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.00000=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 1.00000=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.00000=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 1.00000=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 1.00000=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 1.00000=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 1.00000=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.00000=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.00000=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 1.00000=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 1.00000=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 1.00000=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 1.00000=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 1.00000=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 1.00000=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 1.00000=f(1.19000)*/
-{64, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -7.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xc0140000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* -5.00000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc00921fb, 0x54442d18},			/* -4.00000=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff921fb, 0x54442d18},			/* -2.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 1.00000=f(1.57079)*/
-{64, 0,123,__LINE__, 0x40080000, 0x00000000, 0x400921fb, 0x54442d18},			/* 3.00000=f(3.14159)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 4.00000=f(4.71238)*/
-{64, 0,123,__LINE__, 0xc03e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* -30.0000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xc03d0000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -29.0000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xc03b0000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -27.0000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0xc0390000, 0x00000000, 0xc038e666, 0x66666667},			/* -25.0000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xc0380000, 0x00000000, 0xc0373333, 0x33333334},			/* -24.0000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xc0360000, 0x00000000, 0xc0358000, 0x00000001},			/* -22.0000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xc0340000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -20.0000=f(-19.8000)*/
-{64, 0,123,__LINE__, 0xc0330000, 0x00000000, 0xc0321999, 0x9999999b},			/* -19.0000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xc0310000, 0x00000000, 0xc0306666, 0x66666668},			/* -17.0000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xc02e0000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -15.0000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xc02c0000, 0x00000000, 0xc02a0000, 0x00000004},			/* -14.0000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xc0280000, 0x00000000, 0xc0269999, 0x9999999e},			/* -12.0000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xc0240000, 0x00000000, 0xc0233333, 0x33333338},			/* -10.0000=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xc0200000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -8.00000=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -7.00000=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xc0140000, 0x00000000, 0xc0120000, 0x00000009},			/* -5.00000=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xc0080000, 0x00000000, 0xc0066666, 0x66666678},			/* -3.00000=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff19999, 0x999999bd},			/* -2.00000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.00000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x40000000, 0x00000000, 0x40026666, 0x66666654},			/* 2.00000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x40080000, 0x00000000, 0x400fffff, 0xffffffee},			/* 3.00000=f(4.00000)*/
-{64, 0,123,__LINE__, 0x40140000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 5.00000=f(5.70000)*/
-{64, 0,123,__LINE__, 0x401c0000, 0x00000000, 0x401d9999, 0x99999991},			/* 7.00000=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40220000, 0x00000000, 0x40223333, 0x3333332f},			/* 9.00000=f(9.10000)*/
-{64, 0,123,__LINE__, 0x40240000, 0x00000000, 0x40259999, 0x99999995},			/* 10.0000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x40280000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 12.0000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x402c0000, 0x00000000, 0x402c6666, 0x66666661},			/* 14.0000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x402e0000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 15.0000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x40310000, 0x00000000, 0x40319999, 0x99999997},			/* 17.0000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x40330000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 19.0000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40340000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 20.0000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x40360000, 0x00000000, 0x4036b333, 0x33333330},			/* 22.0000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x40380000, 0x00000000, 0x40386666, 0x66666663},			/* 24.0000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x403a0000, 0x00000000, 0x403a1999, 0x99999996},			/* 26.0000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x403b0000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 27.0000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x403d0000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 29.0000=f(29.5000)*/
-0,};
-test_floor(m)   {run_vector_1(m,floor_vec,(char *)(floor),"floor","dd");   }	
diff --git a/newlib/libm/test/floorf_vec.c b/newlib/libm/test/floorf_vec.c
deleted file mode 100644
index f01e1e6b8..000000000
--- a/newlib/libm/test/floorf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type floorf_vec[] = {
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff33333, 0x33333333},			/* -2.00000=f(-1.20000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* -2.00000=f(-1.19000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* -2.00000=f(-1.18000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -2.00000=f(-1.17000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* -2.00000=f(-1.16000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff26666, 0x66666666},			/* -2.00000=f(-1.15000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* -2.00000=f(-1.14000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* -2.00000=f(-1.13000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* -2.00000=f(-1.12000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -2.00000=f(-1.11000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff19999, 0x99999999},			/* -2.00000=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* -2.00000=f(-1.09000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff147ae, 0x147ae147},			/* -2.00000=f(-1.08000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* -2.00000=f(-1.07000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* -2.00000=f(-1.06000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* -2.00000=f(-1.05000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* -2.00000=f(-1.04000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* -2.00000=f(-1.03000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff051eb, 0x851eb851},			/* -2.00000=f(-1.02000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -2.00000=f(-1.01000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* -1.00000=f(-0.01000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* -1.00000=f(-0.99000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* -1.00000=f(-0.98000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* -1.00000=f(-0.97000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* -1.00000=f(-0.96000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfee6666, 0x66666664},			/* -1.00000=f(-0.95000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* -1.00000=f(-0.94000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* -1.00000=f(-0.93000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* -1.00000=f(-0.92000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* -1.00000=f(-0.91000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* -1.00000=f(-0.90000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* -1.00000=f(-0.89000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* -1.00000=f(-0.88000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* -1.00000=f(-0.87000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* -1.00000=f(-0.86000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeb3333, 0x33333330},			/* -1.00000=f(-0.85000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfeae147, 0xae147ade},			/* -1.00000=f(-0.84000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* -1.00000=f(-0.83000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* -1.00000=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* -1.00000=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe99999, 0x99999996},			/* -1.00000=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* -1.00000=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -1.00000=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -1.00000=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* -1.00000=f(-0.76000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* -1.00000=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* -1.00000=f(-0.74000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* -1.00000=f(-0.73000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* -1.00000=f(-0.72000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* -1.00000=f(-0.71000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe66666, 0x66666662},			/* -1.00000=f(-0.70000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* -1.00000=f(-0.69000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* -1.00000=f(-0.68000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* -1.00000=f(-0.67000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* -1.00000=f(-0.66000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* -1.00000=f(-0.65000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* -1.00000=f(-0.64000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* -1.00000=f(-0.63000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* -1.00000=f(-0.62000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* -1.00000=f(-0.61000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe33333, 0x3333332e},			/* -1.00000=f(-0.60000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* -1.00000=f(-0.59000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* -1.00000=f(-0.58000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* -1.00000=f(-0.57000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* -1.00000=f(-0.56000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe19999, 0x99999994},			/* -1.00000=f(-0.55000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* -1.00000=f(-0.54000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -1.00000=f(-0.53000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* -1.00000=f(-0.52000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* -1.00000=f(-0.51000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* -1.00000=f(-0.50000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* -1.00000=f(-0.49000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* -1.00000=f(-0.48000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* -1.00000=f(-0.47000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* -1.00000=f(-0.46000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* -1.00000=f(-0.45000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* -1.00000=f(-0.44000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* -1.00000=f(-0.43000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* -1.00000=f(-0.42000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* -1.00000=f(-0.41000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd99999, 0x9999998c},			/* -1.00000=f(-0.40000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -1.00000=f(-0.39000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* -1.00000=f(-0.38000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* -1.00000=f(-0.37000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* -1.00000=f(-0.36000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd66666, 0x66666658},			/* -1.00000=f(-0.35000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* -1.00000=f(-0.34000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* -1.00000=f(-0.33000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* -1.00000=f(-0.32000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* -1.00000=f(-0.31000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd33333, 0x33333324},			/* -1.00000=f(-0.30000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* -1.00000=f(-0.29000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* -1.00000=f(-0.28000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* -1.00000=f(-0.27000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* -1.00000=f(-0.26000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* -1.00000=f(-0.25000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* -1.00000=f(-0.24000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* -1.00000=f(-0.23000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* -1.00000=f(-0.22000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* -1.00000=f(-0.21000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc99999, 0x99999978},			/* -1.00000=f(-0.20000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* -1.00000=f(-0.19000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* -1.00000=f(-0.18000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* -1.00000=f(-0.17000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* -1.00000=f(-0.16000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc33333, 0x33333310},			/* -1.00000=f(-0.15000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* -1.00000=f(-0.14000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* -1.00000=f(-0.13000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* -1.00000=f(-0.12000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* -1.00000=f(-0.11000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb99999, 0x99999953},			/* -1.00000=f(-0.00100)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* -1.00000=f(-0.09000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* -1.00000=f(-0.08000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* -1.00000=f(-0.07000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* -1.00000=f(-0.06000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfa99999, 0x9999990e},			/* -1.00000=f(-0.05000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* -1.00000=f(-0.04000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* -1.00000=f(-0.03000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* -1.00000=f(-0.02000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* -1.00000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3cd19000, 0x00000000},			/* 0.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 0.00000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 0.00000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fa47ae1, 0x47ae1508},			/* 0.00000=f(0.04000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fa99999, 0x99999a27},			/* 0.00000=f(0.05000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 0.00000=f(0.06000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb1eb85, 0x1eb85232},			/* 0.00000=f(0.07000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.00000=f(0.08000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb70a3d, 0x70a3d750},			/* 0.00000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fb99999, 0x999999df},			/* 0.00000=f(0.10000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.00000=f(0.11000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fbeb851, 0xeb851efd},			/* 0.00000=f(0.12000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.00000=f(0.13000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.00000=f(0.14000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc33333, 0x33333356},			/* 0.00000=f(0.15000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 0.00000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.00000=f(0.17000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.00000=f(0.18000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc851eb, 0x851eb876},			/* 0.00000=f(0.19000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fc99999, 0x999999be},			/* 0.00000=f(0.20000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcae147, 0xae147b06},			/* 0.00000=f(0.21000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.00000=f(0.22000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.00000=f(0.23000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 0.00000=f(0.24000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.00000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.00000=f(0.26000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd147ae, 0x147ae15b},			/* 0.00000=f(0.27000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.00000=f(0.28000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.00000=f(0.29000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd33333, 0x33333347},			/* 0.00000=f(0.30000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.00000=f(0.31000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 0.00000=f(0.32000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.00000=f(0.33000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.00000=f(0.34000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd66666, 0x6666667b},			/* 0.00000=f(0.35000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.00000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.00000=f(0.37000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd851eb, 0x851eb867},			/* 0.00000=f(0.38000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.00000=f(0.39000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fd99999, 0x999999af},			/* 0.00000=f(0.40000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fda3d70, 0xa3d70a53},			/* 0.00000=f(0.41000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdae147, 0xae147af7},			/* 0.00000=f(0.42000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdb851e, 0xb851eb9b},			/* 0.00000=f(0.43000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.00000=f(0.44000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdccccc, 0xcccccce3},			/* 0.00000=f(0.45000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.00000=f(0.46000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 0.00000=f(0.47000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdeb851, 0xeb851ecf},			/* 0.00000=f(0.48000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.00000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe00000, 0x0000000b},			/* 0.00000=f(0.50000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 0.00000=f(0.51000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.00000=f(0.52000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.00000=f(0.53000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe147ae, 0x147ae153},			/* 0.00000=f(0.54000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe19999, 0x999999a5},			/* 0.00000=f(0.55000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.00000=f(0.56000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 0.00000=f(0.57000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.00000=f(0.58000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 0.00000=f(0.59000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.00000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe3851e, 0xb851eb91},			/* 0.00000=f(0.61000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.00000=f(0.62000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe428f5, 0xc28f5c35},			/* 0.00000=f(0.63000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe47ae1, 0x47ae1487},			/* 0.00000=f(0.64000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.00000=f(0.65000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.00000=f(0.66000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.00000=f(0.67000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.00000=f(0.68000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 0.00000=f(0.69000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe66666, 0x66666673},			/* 0.00000=f(0.70000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 0.00000=f(0.71000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 0.00000=f(0.72000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe75c28, 0xf5c28f69},			/* 0.00000=f(0.73000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.00000=f(0.74000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe80000, 0x0000000d},			/* 0.00000=f(0.75000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe851eb, 0x851eb85f},			/* 0.00000=f(0.76000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.00000=f(0.77000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.00000=f(0.78000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe947ae, 0x147ae155},			/* 0.00000=f(0.79000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe99999, 0x999999a7},			/* 0.00000=f(0.80000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.00000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.00000=f(0.82000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.00000=f(0.83000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feae147, 0xae147aef},			/* 0.00000=f(0.84000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feb3333, 0x33333341},			/* 0.00000=f(0.85000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 0.00000=f(0.86000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3febd70a, 0x3d70a3e5},			/* 0.00000=f(0.87000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 0.00000=f(0.88000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fec7ae1, 0x47ae1489},			/* 0.00000=f(0.89000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 0.00000=f(0.90000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 0.00000=f(0.91000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.00000=f(0.92000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.00000=f(0.93000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 0.00000=f(0.94000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fee6666, 0x66666675},			/* 0.00000=f(0.95000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 0.00000=f(0.96000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 0.00000=f(0.97000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.00000=f(0.98000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* 0.00000=f(0.99000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 1.00000=f(1.01000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff051eb, 0x851eb859},			/* 1.00000=f(1.02000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff07ae1, 0x47ae1482},			/* 1.00000=f(1.03000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.00000=f(1.04000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccd4},			/* 1.00000=f(1.05000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.00000=f(1.06000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff11eb8, 0x51eb8526},			/* 1.00000=f(1.07000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* 1.00000=f(1.08000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 1.00000=f(1.09000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff19999, 0x999999a1},			/* 1.00000=f(1.10000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.00000=f(1.11000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.00000=f(1.12000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* 1.00000=f(1.13000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff23d70, 0xa3d70a45},			/* 1.00000=f(1.14000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff26666, 0x6666666e},			/* 1.00000=f(1.15000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* 1.00000=f(1.16000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 1.00000=f(1.17000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff2e147, 0xae147ae9},			/* 1.00000=f(1.18000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff30a3d, 0x70a3d712},			/* 1.00000=f(1.19000)*/
-{13, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc01921fb, 0x54442d18},			/* -7.00000=f(-6.28318)*/
-{13, 0,123,__LINE__, 0xc0140000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* -5.00000=f(-4.71238)*/
-{11, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc00921fb, 0x54442d18},			/* -4.00000=f(-3.14159)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff921fb, 0x54442d18},			/* -2.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff921fb, 0x54442d18},			/* 1.00000=f(1.57079)*/
-{15, 0,123,__LINE__, 0x40080000, 0x00000000, 0x400921fb, 0x54442d18},			/* 3.00000=f(3.14159)*/
-{14, 0,123,__LINE__, 0x40100000, 0x00000000, 0x4012d97c, 0x7f3321d2},			/* 4.00000=f(4.71238)*/
-{64, 0,123,__LINE__, 0xc03e0000, 0x00000000, 0xc03e0000, 0x00000000},			/* -30.0000=f(-30.0000)*/
-{15, 0,123,__LINE__, 0xc03d0000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -29.0000=f(-28.3000)*/
-{15, 0,123,__LINE__, 0xc03b0000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -27.0000=f(-26.6000)*/
-{15, 0,123,__LINE__, 0xc0390000, 0x00000000, 0xc038e666, 0x66666667},			/* -25.0000=f(-24.9000)*/
-{12, 0,123,__LINE__, 0xc0380000, 0x00000000, 0xc0373333, 0x33333334},			/* -24.0000=f(-23.2000)*/
-{14, 0,123,__LINE__, 0xc0360000, 0x00000000, 0xc0358000, 0x00000001},			/* -22.0000=f(-21.5000)*/
-{13, 0,123,__LINE__, 0xc0340000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -20.0000=f(-19.8000)*/
-{15, 0,123,__LINE__, 0xc0330000, 0x00000000, 0xc0321999, 0x9999999b},			/* -19.0000=f(-18.1000)*/
-{15, 0,123,__LINE__, 0xc0310000, 0x00000000, 0xc0306666, 0x66666668},			/* -17.0000=f(-16.4000)*/
-{14, 0,123,__LINE__, 0xc02e0000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -15.0000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xc02a0000, 0x00000000, 0xc02a0000, 0x00000004},			/* -13.0000=f(-13.0000)*/
-{12, 0,123,__LINE__, 0xc0280000, 0x00000000, 0xc0269999, 0x9999999e},			/* -12.0000=f(-11.3000)*/
-{13, 0,123,__LINE__, 0xc0240000, 0x00000000, 0xc0233333, 0x33333338},			/* -10.0000=f(-9.60000)*/
-{10, 0,123,__LINE__, 0xc0200000, 0x00000000, 0xc01f9999, 0x999999a3},			/* -8.00000=f(-7.90000)*/
-{13, 0,123,__LINE__, 0xc01c0000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* -7.00000=f(-6.20000)*/
-{13, 0,123,__LINE__, 0xc0140000, 0x00000000, 0xc0120000, 0x00000009},			/* -5.00000=f(-4.50000)*/
-{12, 0,123,__LINE__, 0xc0080000, 0x00000000, 0xc0066666, 0x66666678},			/* -3.00000=f(-2.80000)*/
-{ 1, 0,123,__LINE__, 0xc0000000, 0x00000000, 0xbff19999, 0x999999bd},			/* -2.00000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.00000=f(0.60000)*/
-{14, 0,123,__LINE__, 0x40000000, 0x00000000, 0x40026666, 0x66666654},			/* 2.00000=f(2.30000)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400fffff, 0xffffffee},			/* 4.00000=f(4.00000)*/
-{14, 0,123,__LINE__, 0x40140000, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 5.00000=f(5.70000)*/
-{15, 0,123,__LINE__, 0x401c0000, 0x00000000, 0x401d9999, 0x99999991},			/* 7.00000=f(7.40000)*/
-{18, 0,123,__LINE__, 0x40220000, 0x00000000, 0x40223333, 0x3333332f},			/* 9.00000=f(9.10000)*/
-{15, 0,123,__LINE__, 0x40240000, 0x00000000, 0x40259999, 0x99999995},			/* 10.0000=f(10.8000)*/
-{15, 0,123,__LINE__, 0x40280000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 12.0000=f(12.5000)*/
-{17, 0,123,__LINE__, 0x402c0000, 0x00000000, 0x402c6666, 0x66666661},			/* 14.0000=f(14.2000)*/
-{15, 0,123,__LINE__, 0x402e0000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 15.0000=f(15.9000)*/
-{16, 0,123,__LINE__, 0x40310000, 0x00000000, 0x40319999, 0x99999997},			/* 17.0000=f(17.6000)*/
-{17, 0,123,__LINE__, 0x40330000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 19.0000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40350000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 21.0000=f(21.0000)*/
-{16, 0,123,__LINE__, 0x40360000, 0x00000000, 0x4036b333, 0x33333330},			/* 22.0000=f(22.7000)*/
-{17, 0,123,__LINE__, 0x40380000, 0x00000000, 0x40386666, 0x66666663},			/* 24.0000=f(24.4000)*/
-{19, 0,123,__LINE__, 0x403a0000, 0x00000000, 0x403a1999, 0x99999996},			/* 26.0000=f(26.1000)*/
-{16, 0,123,__LINE__, 0x403b0000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 27.0000=f(27.8000)*/
-{16, 0,123,__LINE__, 0x403d0000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 29.0000=f(29.5000)*/
-0,};
-test_floorf(m)   {run_vector_1(m,floorf_vec,(char *)(floorf),"floorf","ff");   }	
diff --git a/newlib/libm/test/fmod_vec.c b/newlib/libm/test/fmod_vec.c
deleted file mode 100644
index 4357c845b..000000000
--- a/newlib/libm/test/fmod_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type fmod_vec[] = {
-{64, 0,123,__LINE__, 0xbff33333, 0x33333333, 0xbff33333, 0x33333333, 0x40066666, 0x66666666},			/* -1.20000=f(-1.20000, v2.80000)*/
-{64, 0,123,__LINE__, 0xbff30a3d, 0x70a3d70a, 0xbff30a3d, 0x70a3d70a, 0x40067ae1, 0x47ae147b},			/* -1.19000=f(-1.19000, v2.81000)*/
-{64, 0,123,__LINE__, 0xbff2e147, 0xae147ae1, 0xbff2e147, 0xae147ae1, 0x40068f5c, 0x28f5c290},			/* -1.18000=f(-1.18000, v2.82000)*/
-{64, 0,123,__LINE__, 0xbff2b851, 0xeb851eb8, 0xbff2b851, 0xeb851eb8, 0x4006a3d7, 0x0a3d70a4},			/* -1.17000=f(-1.17000, v2.83000)*/
-{64, 0,123,__LINE__, 0xbff28f5c, 0x28f5c28f, 0xbff28f5c, 0x28f5c28f, 0x4006b851, 0xeb851eb8},			/* -1.16000=f(-1.16000, v2.84000)*/
-{64, 0,123,__LINE__, 0xbff26666, 0x66666666, 0xbff26666, 0x66666666, 0x4006cccc, 0xcccccccd},			/* -1.15000=f(-1.15000, v2.85000)*/
-{64, 0,123,__LINE__, 0xbff23d70, 0xa3d70a3d, 0xbff23d70, 0xa3d70a3d, 0x4006e147, 0xae147ae2},			/* -1.14000=f(-1.14000, v2.86000)*/
-{64, 0,123,__LINE__, 0xbff2147a, 0xe147ae14, 0xbff2147a, 0xe147ae14, 0x4006f5c2, 0x8f5c28f6},			/* -1.13000=f(-1.13000, v2.87000)*/
-{64, 0,123,__LINE__, 0xbff1eb85, 0x1eb851eb, 0xbff1eb85, 0x1eb851eb, 0x40070a3d, 0x70a3d70a},			/* -1.12000=f(-1.12000, v2.88000)*/
-{64, 0,123,__LINE__, 0xbff1c28f, 0x5c28f5c2, 0xbff1c28f, 0x5c28f5c2, 0x40071eb8, 0x51eb851f},			/* -1.11000=f(-1.11000, v2.89000)*/
-{64, 0,123,__LINE__, 0xbff19999, 0x99999999, 0xbff19999, 0x99999999, 0x40073333, 0x33333334},			/* -1.10000=f(-1.10000, v2.90000)*/
-{64, 0,123,__LINE__, 0xbff170a3, 0xd70a3d70, 0xbff170a3, 0xd70a3d70, 0x400747ae, 0x147ae148},			/* -1.09000=f(-1.09000, v2.91000)*/
-{64, 0,123,__LINE__, 0xbff147ae, 0x147ae147, 0xbff147ae, 0x147ae147, 0x40075c28, 0xf5c28f5c},			/* -1.08000=f(-1.08000, v2.92000)*/
-{64, 0,123,__LINE__, 0xbff11eb8, 0x51eb851e, 0xbff11eb8, 0x51eb851e, 0x400770a3, 0xd70a3d71},			/* -1.07000=f(-1.07000, v2.93000)*/
-{64, 0,123,__LINE__, 0xbff0f5c2, 0x8f5c28f5, 0xbff0f5c2, 0x8f5c28f5, 0x4007851e, 0xb851eb86},			/* -1.06000=f(-1.06000, v2.94000)*/
-{64, 0,123,__LINE__, 0xbff0cccc, 0xcccccccc, 0xbff0cccc, 0xcccccccc, 0x40079999, 0x9999999a},			/* -1.05000=f(-1.05000, v2.95000)*/
-{64, 0,123,__LINE__, 0xbff0a3d7, 0x0a3d70a3, 0xbff0a3d7, 0x0a3d70a3, 0x4007ae14, 0x7ae147ae},			/* -1.04000=f(-1.04000, v2.96000)*/
-{64, 0,123,__LINE__, 0xbff07ae1, 0x47ae147a, 0xbff07ae1, 0x47ae147a, 0x4007c28f, 0x5c28f5c3},			/* -1.03000=f(-1.03000, v2.97000)*/
-{64, 0,123,__LINE__, 0xbff051eb, 0x851eb851, 0xbff051eb, 0x851eb851, 0x4007d70a, 0x3d70a3d8},			/* -1.02000=f(-1.02000, v2.98000)*/
-{64, 0,123,__LINE__, 0xbff028f5, 0xc28f5c28, 0xbff028f5, 0xc28f5c28, 0x4007eb85, 0x1eb851ec},			/* -1.01000=f(-1.01000, v2.99000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfffffffe, 0xbfefffff, 0xfffffffe, 0x40080000, 0x00000000},			/* -0.01000=f(-0.01000, v3.00000)*/
-{64, 0,123,__LINE__, 0xbfefae14, 0x7ae147ac, 0xbfefae14, 0x7ae147ac, 0x4008147a, 0xe147ae15},			/* -0.99000=f(-0.99000, v3.01000)*/
-{64, 0,123,__LINE__, 0xbfef5c28, 0xf5c28f5a, 0xbfef5c28, 0xf5c28f5a, 0x400828f5, 0xc28f5c2a},			/* -0.98000=f(-0.98000, v3.02000)*/
-{64, 0,123,__LINE__, 0xbfef0a3d, 0x70a3d708, 0xbfef0a3d, 0x70a3d708, 0x40083d70, 0xa3d70a3e},			/* -0.97000=f(-0.97000, v3.03000)*/
-{64, 0,123,__LINE__, 0xbfeeb851, 0xeb851eb6, 0xbfeeb851, 0xeb851eb6, 0x400851eb, 0x851eb852},			/* -0.96000=f(-0.96000, v3.04000)*/
-{64, 0,123,__LINE__, 0xbfee6666, 0x66666664, 0xbfee6666, 0x66666664, 0x40086666, 0x66666667},			/* -0.95000=f(-0.95000, v3.05000)*/
-{64, 0,123,__LINE__, 0xbfee147a, 0xe147ae12, 0xbfee147a, 0xe147ae12, 0x40087ae1, 0x47ae147c},			/* -0.94000=f(-0.94000, v3.06000)*/
-{64, 0,123,__LINE__, 0xbfedc28f, 0x5c28f5c0, 0xbfedc28f, 0x5c28f5c0, 0x40088f5c, 0x28f5c290},			/* -0.93000=f(-0.93000, v3.07000)*/
-{64, 0,123,__LINE__, 0xbfed70a3, 0xd70a3d6e, 0xbfed70a3, 0xd70a3d6e, 0x4008a3d7, 0x0a3d70a4},			/* -0.92000=f(-0.92000, v3.08000)*/
-{64, 0,123,__LINE__, 0xbfed1eb8, 0x51eb851c, 0xbfed1eb8, 0x51eb851c, 0x4008b851, 0xeb851eb9},			/* -0.91000=f(-0.91000, v3.09000)*/
-{64, 0,123,__LINE__, 0xbfeccccc, 0xccccccca, 0xbfeccccc, 0xccccccca, 0x4008cccc, 0xccccccce},			/* -0.90000=f(-0.90000, v3.10000)*/
-{64, 0,123,__LINE__, 0xbfec7ae1, 0x47ae1478, 0xbfec7ae1, 0x47ae1478, 0x4008e147, 0xae147ae2},			/* -0.89000=f(-0.89000, v3.11000)*/
-{64, 0,123,__LINE__, 0xbfec28f5, 0xc28f5c26, 0xbfec28f5, 0xc28f5c26, 0x4008f5c2, 0x8f5c28f6},			/* -0.88000=f(-0.88000, v3.12000)*/
-{64, 0,123,__LINE__, 0xbfebd70a, 0x3d70a3d4, 0xbfebd70a, 0x3d70a3d4, 0x40090a3d, 0x70a3d70b},			/* -0.87000=f(-0.87000, v3.13000)*/
-{64, 0,123,__LINE__, 0xbfeb851e, 0xb851eb82, 0xbfeb851e, 0xb851eb82, 0x40091eb8, 0x51eb8520},			/* -0.86000=f(-0.86000, v3.14000)*/
-{64, 0,123,__LINE__, 0xbfeb3333, 0x33333330, 0xbfeb3333, 0x33333330, 0x40093333, 0x33333334},			/* -0.85000=f(-0.85000, v3.15000)*/
-{64, 0,123,__LINE__, 0xbfeae147, 0xae147ade, 0xbfeae147, 0xae147ade, 0x400947ae, 0x147ae148},			/* -0.84000=f(-0.84000, v3.16000)*/
-{64, 0,123,__LINE__, 0xbfea8f5c, 0x28f5c28c, 0xbfea8f5c, 0x28f5c28c, 0x40095c28, 0xf5c28f5d},			/* -0.83000=f(-0.83000, v3.17000)*/
-{64, 0,123,__LINE__, 0xbfea3d70, 0xa3d70a3a, 0xbfea3d70, 0xa3d70a3a, 0x400970a3, 0xd70a3d72},			/* -0.82000=f(-0.82000, v3.18000)*/
-{64, 0,123,__LINE__, 0xbfe9eb85, 0x1eb851e8, 0xbfe9eb85, 0x1eb851e8, 0x4009851e, 0xb851eb86},			/* -0.81000=f(-0.81000, v3.19000)*/
-{64, 0,123,__LINE__, 0xbfe99999, 0x99999996, 0xbfe99999, 0x99999996, 0x40099999, 0x9999999a},			/* -0.80000=f(-0.80000, v3.20000)*/
-{64, 0,123,__LINE__, 0xbfe947ae, 0x147ae144, 0xbfe947ae, 0x147ae144, 0x4009ae14, 0x7ae147af},			/* -0.79000=f(-0.79000, v3.21000)*/
-{64, 0,123,__LINE__, 0xbfe8f5c2, 0x8f5c28f2, 0xbfe8f5c2, 0x8f5c28f2, 0x4009c28f, 0x5c28f5c4},			/* -0.78000=f(-0.78000, v3.22000)*/
-{64, 0,123,__LINE__, 0xbfe8a3d7, 0x0a3d70a0, 0xbfe8a3d7, 0x0a3d70a0, 0x4009d70a, 0x3d70a3d8},			/* -0.77000=f(-0.77000, v3.23000)*/
-{64, 0,123,__LINE__, 0xbfe851eb, 0x851eb84e, 0xbfe851eb, 0x851eb84e, 0x4009eb85, 0x1eb851ec},			/* -0.76000=f(-0.76000, v3.24000)*/
-{64, 0,123,__LINE__, 0xbfe7ffff, 0xfffffffc, 0xbfe7ffff, 0xfffffffc, 0x400a0000, 0x00000001},			/* -0.75000=f(-0.75000, v3.25000)*/
-{64, 0,123,__LINE__, 0xbfe7ae14, 0x7ae147aa, 0xbfe7ae14, 0x7ae147aa, 0x400a147a, 0xe147ae16},			/* -0.74000=f(-0.74000, v3.26000)*/
-{64, 0,123,__LINE__, 0xbfe75c28, 0xf5c28f58, 0xbfe75c28, 0xf5c28f58, 0x400a28f5, 0xc28f5c2a},			/* -0.73000=f(-0.73000, v3.27000)*/
-{64, 0,123,__LINE__, 0xbfe70a3d, 0x70a3d706, 0xbfe70a3d, 0x70a3d706, 0x400a3d70, 0xa3d70a3e},			/* -0.72000=f(-0.72000, v3.28000)*/
-{64, 0,123,__LINE__, 0xbfe6b851, 0xeb851eb4, 0xbfe6b851, 0xeb851eb4, 0x400a51eb, 0x851eb853},			/* -0.71000=f(-0.71000, v3.29000)*/
-{64, 0,123,__LINE__, 0xbfe66666, 0x66666662, 0xbfe66666, 0x66666662, 0x400a6666, 0x66666668},			/* -0.70000=f(-0.70000, v3.30000)*/
-{64, 0,123,__LINE__, 0xbfe6147a, 0xe147ae10, 0xbfe6147a, 0xe147ae10, 0x400a7ae1, 0x47ae147c},			/* -0.69000=f(-0.69000, v3.31000)*/
-{64, 0,123,__LINE__, 0xbfe5c28f, 0x5c28f5be, 0xbfe5c28f, 0x5c28f5be, 0x400a8f5c, 0x28f5c290},			/* -0.68000=f(-0.68000, v3.32000)*/
-{64, 0,123,__LINE__, 0xbfe570a3, 0xd70a3d6c, 0xbfe570a3, 0xd70a3d6c, 0x400aa3d7, 0x0a3d70a5},			/* -0.67000=f(-0.67000, v3.33000)*/
-{64, 0,123,__LINE__, 0xbfe51eb8, 0x51eb851a, 0xbfe51eb8, 0x51eb851a, 0x400ab851, 0xeb851eba},			/* -0.66000=f(-0.66000, v3.34000)*/
-{64, 0,123,__LINE__, 0xbfe4cccc, 0xccccccc8, 0xbfe4cccc, 0xccccccc8, 0x400acccc, 0xccccccce},			/* -0.65000=f(-0.65000, v3.35000)*/
-{64, 0,123,__LINE__, 0xbfe47ae1, 0x47ae1476, 0xbfe47ae1, 0x47ae1476, 0x400ae147, 0xae147ae2},			/* -0.64000=f(-0.64000, v3.36000)*/
-{64, 0,123,__LINE__, 0xbfe428f5, 0xc28f5c24, 0xbfe428f5, 0xc28f5c24, 0x400af5c2, 0x8f5c28f7},			/* -0.63000=f(-0.63000, v3.37000)*/
-{64, 0,123,__LINE__, 0xbfe3d70a, 0x3d70a3d2, 0xbfe3d70a, 0x3d70a3d2, 0x400b0a3d, 0x70a3d70c},			/* -0.62000=f(-0.62000, v3.38000)*/
-{64, 0,123,__LINE__, 0xbfe3851e, 0xb851eb80, 0xbfe3851e, 0xb851eb80, 0x400b1eb8, 0x51eb8520},			/* -0.61000=f(-0.61000, v3.39000)*/
-{64, 0,123,__LINE__, 0xbfe33333, 0x3333332e, 0xbfe33333, 0x3333332e, 0x400b3333, 0x33333334},			/* -0.60000=f(-0.60000, v3.40000)*/
-{64, 0,123,__LINE__, 0xbfe2e147, 0xae147adc, 0xbfe2e147, 0xae147adc, 0x400b47ae, 0x147ae149},			/* -0.59000=f(-0.59000, v3.41000)*/
-{64, 0,123,__LINE__, 0xbfe28f5c, 0x28f5c28a, 0xbfe28f5c, 0x28f5c28a, 0x400b5c28, 0xf5c28f5e},			/* -0.58000=f(-0.58000, v3.42000)*/
-{64, 0,123,__LINE__, 0xbfe23d70, 0xa3d70a38, 0xbfe23d70, 0xa3d70a38, 0x400b70a3, 0xd70a3d72},			/* -0.57000=f(-0.57000, v3.43000)*/
-{64, 0,123,__LINE__, 0xbfe1eb85, 0x1eb851e6, 0xbfe1eb85, 0x1eb851e6, 0x400b851e, 0xb851eb86},			/* -0.56000=f(-0.56000, v3.44000)*/
-{64, 0,123,__LINE__, 0xbfe19999, 0x99999994, 0xbfe19999, 0x99999994, 0x400b9999, 0x9999999b},			/* -0.55000=f(-0.55000, v3.45000)*/
-{64, 0,123,__LINE__, 0xbfe147ae, 0x147ae142, 0xbfe147ae, 0x147ae142, 0x400bae14, 0x7ae147b0},			/* -0.54000=f(-0.54000, v3.46000)*/
-{64, 0,123,__LINE__, 0xbfe0f5c2, 0x8f5c28f0, 0xbfe0f5c2, 0x8f5c28f0, 0x400bc28f, 0x5c28f5c4},			/* -0.53000=f(-0.53000, v3.47000)*/
-{64, 0,123,__LINE__, 0xbfe0a3d7, 0x0a3d709e, 0xbfe0a3d7, 0x0a3d709e, 0x400bd70a, 0x3d70a3d8},			/* -0.52000=f(-0.52000, v3.48000)*/
-{64, 0,123,__LINE__, 0xbfe051eb, 0x851eb84c, 0xbfe051eb, 0x851eb84c, 0x400beb85, 0x1eb851ed},			/* -0.51000=f(-0.51000, v3.49000)*/
-{64, 0,123,__LINE__, 0xbfdfffff, 0xfffffff4, 0xbfdfffff, 0xfffffff4, 0x400c0000, 0x00000002},			/* -0.50000=f(-0.50000, v3.50000)*/
-{64, 0,123,__LINE__, 0xbfdf5c28, 0xf5c28f50, 0xbfdf5c28, 0xf5c28f50, 0x400c147a, 0xe147ae16},			/* -0.49000=f(-0.49000, v3.51000)*/
-{64, 0,123,__LINE__, 0xbfdeb851, 0xeb851eac, 0xbfdeb851, 0xeb851eac, 0x400c28f5, 0xc28f5c2a},			/* -0.48000=f(-0.48000, v3.52000)*/
-{64, 0,123,__LINE__, 0xbfde147a, 0xe147ae08, 0xbfde147a, 0xe147ae08, 0x400c3d70, 0xa3d70a3f},			/* -0.47000=f(-0.47000, v3.53000)*/
-{64, 0,123,__LINE__, 0xbfdd70a3, 0xd70a3d64, 0xbfdd70a3, 0xd70a3d64, 0x400c51eb, 0x851eb854},			/* -0.46000=f(-0.46000, v3.54000)*/
-{64, 0,123,__LINE__, 0xbfdccccc, 0xccccccc0, 0xbfdccccc, 0xccccccc0, 0x400c6666, 0x66666668},			/* -0.45000=f(-0.45000, v3.55000)*/
-{64, 0,123,__LINE__, 0xbfdc28f5, 0xc28f5c1c, 0xbfdc28f5, 0xc28f5c1c, 0x400c7ae1, 0x47ae147c},			/* -0.44000=f(-0.44000, v3.56000)*/
-{64, 0,123,__LINE__, 0xbfdb851e, 0xb851eb78, 0xbfdb851e, 0xb851eb78, 0x400c8f5c, 0x28f5c291},			/* -0.43000=f(-0.43000, v3.57000)*/
-{64, 0,123,__LINE__, 0xbfdae147, 0xae147ad4, 0xbfdae147, 0xae147ad4, 0x400ca3d7, 0x0a3d70a6},			/* -0.42000=f(-0.42000, v3.58000)*/
-{64, 0,123,__LINE__, 0xbfda3d70, 0xa3d70a30, 0xbfda3d70, 0xa3d70a30, 0x400cb851, 0xeb851eba},			/* -0.41000=f(-0.41000, v3.59000)*/
-{64, 0,123,__LINE__, 0xbfd99999, 0x9999998c, 0xbfd99999, 0x9999998c, 0x400ccccc, 0xccccccce},			/* -0.40000=f(-0.40000, v3.60000)*/
-{64, 0,123,__LINE__, 0xbfd8f5c2, 0x8f5c28e8, 0xbfd8f5c2, 0x8f5c28e8, 0x400ce147, 0xae147ae3},			/* -0.39000=f(-0.39000, v3.61000)*/
-{64, 0,123,__LINE__, 0xbfd851eb, 0x851eb844, 0xbfd851eb, 0x851eb844, 0x400cf5c2, 0x8f5c28f8},			/* -0.38000=f(-0.38000, v3.62000)*/
-{64, 0,123,__LINE__, 0xbfd7ae14, 0x7ae147a0, 0xbfd7ae14, 0x7ae147a0, 0x400d0a3d, 0x70a3d70c},			/* -0.37000=f(-0.37000, v3.63000)*/
-{64, 0,123,__LINE__, 0xbfd70a3d, 0x70a3d6fc, 0xbfd70a3d, 0x70a3d6fc, 0x400d1eb8, 0x51eb8520},			/* -0.36000=f(-0.36000, v3.64000)*/
-{64, 0,123,__LINE__, 0xbfd66666, 0x66666658, 0xbfd66666, 0x66666658, 0x400d3333, 0x33333335},			/* -0.35000=f(-0.35000, v3.65000)*/
-{64, 0,123,__LINE__, 0xbfd5c28f, 0x5c28f5b4, 0xbfd5c28f, 0x5c28f5b4, 0x400d47ae, 0x147ae14a},			/* -0.34000=f(-0.34000, v3.66000)*/
-{64, 0,123,__LINE__, 0xbfd51eb8, 0x51eb8510, 0xbfd51eb8, 0x51eb8510, 0x400d5c28, 0xf5c28f5e},			/* -0.33000=f(-0.33000, v3.67000)*/
-{64, 0,123,__LINE__, 0xbfd47ae1, 0x47ae146c, 0xbfd47ae1, 0x47ae146c, 0x400d70a3, 0xd70a3d72},			/* -0.32000=f(-0.32000, v3.68000)*/
-{64, 0,123,__LINE__, 0xbfd3d70a, 0x3d70a3c8, 0xbfd3d70a, 0x3d70a3c8, 0x400d851e, 0xb851eb87},			/* -0.31000=f(-0.31000, v3.69000)*/
-{64, 0,123,__LINE__, 0xbfd33333, 0x33333324, 0xbfd33333, 0x33333324, 0x400d9999, 0x9999999c},			/* -0.30000=f(-0.30000, v3.70000)*/
-{64, 0,123,__LINE__, 0xbfd28f5c, 0x28f5c280, 0xbfd28f5c, 0x28f5c280, 0x400dae14, 0x7ae147b0},			/* -0.29000=f(-0.29000, v3.71000)*/
-{64, 0,123,__LINE__, 0xbfd1eb85, 0x1eb851dc, 0xbfd1eb85, 0x1eb851dc, 0x400dc28f, 0x5c28f5c4},			/* -0.28000=f(-0.28000, v3.72000)*/
-{64, 0,123,__LINE__, 0xbfd147ae, 0x147ae138, 0xbfd147ae, 0x147ae138, 0x400dd70a, 0x3d70a3d9},			/* -0.27000=f(-0.27000, v3.73000)*/
-{64, 0,123,__LINE__, 0xbfd0a3d7, 0x0a3d7094, 0xbfd0a3d7, 0x0a3d7094, 0x400deb85, 0x1eb851ee},			/* -0.26000=f(-0.26000, v3.74000)*/
-{64, 0,123,__LINE__, 0xbfcfffff, 0xffffffe0, 0xbfcfffff, 0xffffffe0, 0x400e0000, 0x00000002},			/* -0.25000=f(-0.25000, v3.75000)*/
-{64, 0,123,__LINE__, 0xbfceb851, 0xeb851e98, 0xbfceb851, 0xeb851e98, 0x400e147a, 0xe147ae16},			/* -0.24000=f(-0.24000, v3.76000)*/
-{64, 0,123,__LINE__, 0xbfcd70a3, 0xd70a3d50, 0xbfcd70a3, 0xd70a3d50, 0x400e28f5, 0xc28f5c2b},			/* -0.23000=f(-0.23000, v3.77000)*/
-{64, 0,123,__LINE__, 0xbfcc28f5, 0xc28f5c08, 0xbfcc28f5, 0xc28f5c08, 0x400e3d70, 0xa3d70a40},			/* -0.22000=f(-0.22000, v3.78000)*/
-{64, 0,123,__LINE__, 0xbfcae147, 0xae147ac0, 0xbfcae147, 0xae147ac0, 0x400e51eb, 0x851eb854},			/* -0.21000=f(-0.21000, v3.79000)*/
-{64, 0,123,__LINE__, 0xbfc99999, 0x99999978, 0xbfc99999, 0x99999978, 0x400e6666, 0x66666668},			/* -0.20000=f(-0.20000, v3.80000)*/
-{64, 0,123,__LINE__, 0xbfc851eb, 0x851eb830, 0xbfc851eb, 0x851eb830, 0x400e7ae1, 0x47ae147d},			/* -0.19000=f(-0.19000, v3.81000)*/
-{64, 0,123,__LINE__, 0xbfc70a3d, 0x70a3d6e8, 0xbfc70a3d, 0x70a3d6e8, 0x400e8f5c, 0x28f5c292},			/* -0.18000=f(-0.18000, v3.82000)*/
-{64, 0,123,__LINE__, 0xbfc5c28f, 0x5c28f5a0, 0xbfc5c28f, 0x5c28f5a0, 0x400ea3d7, 0x0a3d70a6},			/* -0.17000=f(-0.17000, v3.83000)*/
-{64, 0,123,__LINE__, 0xbfc47ae1, 0x47ae1458, 0xbfc47ae1, 0x47ae1458, 0x400eb851, 0xeb851eba},			/* -0.16000=f(-0.16000, v3.84000)*/
-{64, 0,123,__LINE__, 0xbfc33333, 0x33333310, 0xbfc33333, 0x33333310, 0x400ecccc, 0xcccccccf},			/* -0.15000=f(-0.15000, v3.85000)*/
-{64, 0,123,__LINE__, 0xbfc1eb85, 0x1eb851c8, 0xbfc1eb85, 0x1eb851c8, 0x400ee147, 0xae147ae4},			/* -0.14000=f(-0.14000, v3.86000)*/
-{64, 0,123,__LINE__, 0xbfc0a3d7, 0x0a3d7080, 0xbfc0a3d7, 0x0a3d7080, 0x400ef5c2, 0x8f5c28f8},			/* -0.13000=f(-0.13000, v3.87000)*/
-{64, 0,123,__LINE__, 0xbfbeb851, 0xeb851e71, 0xbfbeb851, 0xeb851e71, 0x400f0a3d, 0x70a3d70c},			/* -0.12000=f(-0.12000, v3.88000)*/
-{64, 0,123,__LINE__, 0xbfbc28f5, 0xc28f5be2, 0xbfbc28f5, 0xc28f5be2, 0x400f1eb8, 0x51eb8521},			/* -0.11000=f(-0.11000, v3.89000)*/
-{64, 0,123,__LINE__, 0xbfb99999, 0x99999953, 0xbfb99999, 0x99999953, 0x400f3333, 0x33333335},			/* -0.00100=f(-0.00100, v3.90000)*/
-{64, 0,123,__LINE__, 0xbfb70a3d, 0x70a3d6c4, 0xbfb70a3d, 0x70a3d6c4, 0x400f47ae, 0x147ae14a},			/* -0.09000=f(-0.09000, v3.91000)*/
-{64, 0,123,__LINE__, 0xbfb47ae1, 0x47ae1435, 0xbfb47ae1, 0x47ae1435, 0x400f5c28, 0xf5c28f5e},			/* -0.08000=f(-0.08000, v3.92000)*/
-{64, 0,123,__LINE__, 0xbfb1eb85, 0x1eb851a6, 0xbfb1eb85, 0x1eb851a6, 0x400f70a3, 0xd70a3d73},			/* -0.07000=f(-0.07000, v3.93000)*/
-{64, 0,123,__LINE__, 0xbfaeb851, 0xeb851e2d, 0xbfaeb851, 0xeb851e2d, 0x400f851e, 0xb851eb87},			/* -0.06000=f(-0.06000, v3.94000)*/
-{64, 0,123,__LINE__, 0xbfa99999, 0x9999990e, 0xbfa99999, 0x9999990e, 0x400f9999, 0x9999999c},			/* -0.05000=f(-0.05000, v3.95000)*/
-{64, 0,123,__LINE__, 0xbfa47ae1, 0x47ae13ef, 0xbfa47ae1, 0x47ae13ef, 0x400fae14, 0x7ae147b0},			/* -0.04000=f(-0.04000, v3.96000)*/
-{64, 0,123,__LINE__, 0xbf9eb851, 0xeb851da0, 0xbf9eb851, 0xeb851da0, 0x400fc28f, 0x5c28f5c5},			/* -0.03000=f(-0.03000, v3.97000)*/
-{64, 0,123,__LINE__, 0xbf947ae1, 0x47ae1362, 0xbf947ae1, 0x47ae1362, 0x400fd70a, 0x3d70a3d9},			/* -0.02000=f(-0.02000, v3.98000)*/
-{64, 0,123,__LINE__, 0xbf847ae1, 0x47ae1249, 0xbf847ae1, 0x47ae1249, 0x400feb85, 0x1eb851ee},			/* -0.00010=f(-0.00010, v3.99000)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000, 0x40100000, 0x00000001},			/* 9.74915e-16=f(9.74915e-16, v4.00000)*/
-{64, 0,123,__LINE__, 0x3f847ae1, 0x47ae16ad, 0x3f847ae1, 0x47ae16ad, 0x40100a3d, 0x70a3d70b},			/* 0.01000=f(0.01000, v4.01000)*/
-{64, 0,123,__LINE__, 0x3f947ae1, 0x47ae1594, 0x3f947ae1, 0x47ae1594, 0x4010147a, 0xe147ae16},			/* 0.02000=f(0.02000, v4.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb851, 0xeb851fd2, 0x3f9eb851, 0xeb851fd2, 0x40101eb8, 0x51eb8520},			/* 0.03000=f(0.03000, v4.03000)*/
-{64, 0,123,__LINE__, 0x3fa47ae1, 0x47ae1508, 0x3fa47ae1, 0x47ae1508, 0x401028f5, 0xc28f5c2a},			/* 0.04000=f(0.04000, v4.04000)*/
-{64, 0,123,__LINE__, 0x3fa99999, 0x99999a27, 0x3fa99999, 0x99999a27, 0x40103333, 0x33333334},			/* 0.05000=f(0.05000, v4.05000)*/
-{64, 0,123,__LINE__, 0x3faeb851, 0xeb851f46, 0x3faeb851, 0xeb851f46, 0x40103d70, 0xa3d70a3f},			/* 0.06000=f(0.06000, v4.06000)*/
-{64, 0,123,__LINE__, 0x3fb1eb85, 0x1eb85232, 0x3fb1eb85, 0x1eb85232, 0x401047ae, 0x147ae149},			/* 0.07000=f(0.07000, v4.07000)*/
-{64, 0,123,__LINE__, 0x3fb47ae1, 0x47ae14c1, 0x3fb47ae1, 0x47ae14c1, 0x401051eb, 0x851eb853},			/* 0.08000=f(0.08000, v4.08000)*/
-{64, 0,123,__LINE__, 0x3fb70a3d, 0x70a3d750, 0x3fb70a3d, 0x70a3d750, 0x40105c28, 0xf5c28f5d},			/* 0.09000=f(0.09000, v4.09000)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0x999999df, 0x3fb99999, 0x999999df, 0x40106666, 0x66666667},			/* 0.10000=f(0.10000, v4.10000)*/
-{64, 0,123,__LINE__, 0x3fbc28f5, 0xc28f5c6e, 0x3fbc28f5, 0xc28f5c6e, 0x401070a3, 0xd70a3d72},			/* 0.11000=f(0.11000, v4.11000)*/
-{64, 0,123,__LINE__, 0x3fbeb851, 0xeb851efd, 0x3fbeb851, 0xeb851efd, 0x40107ae1, 0x47ae147c},			/* 0.12000=f(0.12000, v4.12000)*/
-{64, 0,123,__LINE__, 0x3fc0a3d7, 0x0a3d70c6, 0x3fc0a3d7, 0x0a3d70c6, 0x4010851e, 0xb851eb86},			/* 0.13000=f(0.13000, v4.13000)*/
-{64, 0,123,__LINE__, 0x3fc1eb85, 0x1eb8520e, 0x3fc1eb85, 0x1eb8520e, 0x40108f5c, 0x28f5c290},			/* 0.14000=f(0.14000, v4.14000)*/
-{64, 0,123,__LINE__, 0x3fc33333, 0x33333356, 0x3fc33333, 0x33333356, 0x40109999, 0x9999999b},			/* 0.15000=f(0.15000, v4.15000)*/
-{64, 0,123,__LINE__, 0x3fc47ae1, 0x47ae149e, 0x3fc47ae1, 0x47ae149e, 0x4010a3d7, 0x0a3d70a5},			/* 0.16000=f(0.16000, v4.16000)*/
-{64, 0,123,__LINE__, 0x3fc5c28f, 0x5c28f5e6, 0x3fc5c28f, 0x5c28f5e6, 0x4010ae14, 0x7ae147af},			/* 0.17000=f(0.17000, v4.17000)*/
-{64, 0,123,__LINE__, 0x3fc70a3d, 0x70a3d72e, 0x3fc70a3d, 0x70a3d72e, 0x4010b851, 0xeb851eb9},			/* 0.18000=f(0.18000, v4.18000)*/
-{64, 0,123,__LINE__, 0x3fc851eb, 0x851eb876, 0x3fc851eb, 0x851eb876, 0x4010c28f, 0x5c28f5c4},			/* 0.19000=f(0.19000, v4.19000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0x999999be, 0x3fc99999, 0x999999be, 0x4010cccc, 0xccccccce},			/* 0.20000=f(0.20000, v4.20000)*/
-{64, 0,123,__LINE__, 0x3fcae147, 0xae147b06, 0x3fcae147, 0xae147b06, 0x4010d70a, 0x3d70a3d8},			/* 0.21000=f(0.21000, v4.21000)*/
-{64, 0,123,__LINE__, 0x3fcc28f5, 0xc28f5c4e, 0x3fcc28f5, 0xc28f5c4e, 0x4010e147, 0xae147ae2},			/* 0.22000=f(0.22000, v4.22000)*/
-{64, 0,123,__LINE__, 0x3fcd70a3, 0xd70a3d96, 0x3fcd70a3, 0xd70a3d96, 0x4010eb85, 0x1eb851ed},			/* 0.23000=f(0.23000, v4.23000)*/
-{64, 0,123,__LINE__, 0x3fceb851, 0xeb851ede, 0x3fceb851, 0xeb851ede, 0x4010f5c2, 0x8f5c28f7},			/* 0.24000=f(0.24000, v4.24000)*/
-{64, 0,123,__LINE__, 0x3fd00000, 0x00000013, 0x3fd00000, 0x00000013, 0x40110000, 0x00000001},			/* 0.25000=f(0.25000, v4.25000)*/
-{64, 0,123,__LINE__, 0x3fd0a3d7, 0x0a3d70b7, 0x3fd0a3d7, 0x0a3d70b7, 0x40110a3d, 0x70a3d70b},			/* 0.26000=f(0.26000, v4.26000)*/
-{64, 0,123,__LINE__, 0x3fd147ae, 0x147ae15b, 0x3fd147ae, 0x147ae15b, 0x4011147a, 0xe147ae16},			/* 0.27000=f(0.27000, v4.27000)*/
-{64, 0,123,__LINE__, 0x3fd1eb85, 0x1eb851ff, 0x3fd1eb85, 0x1eb851ff, 0x40111eb8, 0x51eb8520},			/* 0.28000=f(0.28000, v4.28000)*/
-{64, 0,123,__LINE__, 0x3fd28f5c, 0x28f5c2a3, 0x3fd28f5c, 0x28f5c2a3, 0x401128f5, 0xc28f5c2a},			/* 0.29000=f(0.29000, v4.29000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x33333347, 0x3fd33333, 0x33333347, 0x40113333, 0x33333334},			/* 0.30000=f(0.30000, v4.30000)*/
-{64, 0,123,__LINE__, 0x3fd3d70a, 0x3d70a3eb, 0x3fd3d70a, 0x3d70a3eb, 0x40113d70, 0xa3d70a3f},			/* 0.31000=f(0.31000, v4.31000)*/
-{64, 0,123,__LINE__, 0x3fd47ae1, 0x47ae148f, 0x3fd47ae1, 0x47ae148f, 0x401147ae, 0x147ae149},			/* 0.32000=f(0.32000, v4.32000)*/
-{64, 0,123,__LINE__, 0x3fd51eb8, 0x51eb8533, 0x3fd51eb8, 0x51eb8533, 0x401151eb, 0x851eb853},			/* 0.33000=f(0.33000, v4.33000)*/
-{64, 0,123,__LINE__, 0x3fd5c28f, 0x5c28f5d7, 0x3fd5c28f, 0x5c28f5d7, 0x40115c28, 0xf5c28f5d},			/* 0.34000=f(0.34000, v4.34000)*/
-{64, 0,123,__LINE__, 0x3fd66666, 0x6666667b, 0x3fd66666, 0x6666667b, 0x40116666, 0x66666668},			/* 0.35000=f(0.35000, v4.35000)*/
-{64, 0,123,__LINE__, 0x3fd70a3d, 0x70a3d71f, 0x3fd70a3d, 0x70a3d71f, 0x401170a3, 0xd70a3d72},			/* 0.36000=f(0.36000, v4.36000)*/
-{64, 0,123,__LINE__, 0x3fd7ae14, 0x7ae147c3, 0x3fd7ae14, 0x7ae147c3, 0x40117ae1, 0x47ae147c},			/* 0.37000=f(0.37000, v4.37000)*/
-{64, 0,123,__LINE__, 0x3fd851eb, 0x851eb867, 0x3fd851eb, 0x851eb867, 0x4011851e, 0xb851eb86},			/* 0.38000=f(0.38000, v4.38000)*/
-{64, 0,123,__LINE__, 0x3fd8f5c2, 0x8f5c290b, 0x3fd8f5c2, 0x8f5c290b, 0x40118f5c, 0x28f5c291},			/* 0.39000=f(0.39000, v4.39000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0x999999af, 0x3fd99999, 0x999999af, 0x40119999, 0x9999999b},			/* 0.40000=f(0.40000, v4.40000)*/
-{64, 0,123,__LINE__, 0x3fda3d70, 0xa3d70a53, 0x3fda3d70, 0xa3d70a53, 0x4011a3d7, 0x0a3d70a5},			/* 0.41000=f(0.41000, v4.41000)*/
-{64, 0,123,__LINE__, 0x3fdae147, 0xae147af7, 0x3fdae147, 0xae147af7, 0x4011ae14, 0x7ae147af},			/* 0.42000=f(0.42000, v4.42000)*/
-{64, 0,123,__LINE__, 0x3fdb851e, 0xb851eb9b, 0x3fdb851e, 0xb851eb9b, 0x4011b851, 0xeb851eba},			/* 0.43000=f(0.43000, v4.43000)*/
-{64, 0,123,__LINE__, 0x3fdc28f5, 0xc28f5c3f, 0x3fdc28f5, 0xc28f5c3f, 0x4011c28f, 0x5c28f5c4},			/* 0.44000=f(0.44000, v4.44000)*/
-{64, 0,123,__LINE__, 0x3fdccccc, 0xcccccce3, 0x3fdccccc, 0xcccccce3, 0x4011cccc, 0xccccccce},			/* 0.45000=f(0.45000, v4.45000)*/
-{64, 0,123,__LINE__, 0x3fdd70a3, 0xd70a3d87, 0x3fdd70a3, 0xd70a3d87, 0x4011d70a, 0x3d70a3d8},			/* 0.46000=f(0.46000, v4.46000)*/
-{64, 0,123,__LINE__, 0x3fde147a, 0xe147ae2b, 0x3fde147a, 0xe147ae2b, 0x4011e147, 0xae147ae3},			/* 0.47000=f(0.47000, v4.47000)*/
-{64, 0,123,__LINE__, 0x3fdeb851, 0xeb851ecf, 0x3fdeb851, 0xeb851ecf, 0x4011eb85, 0x1eb851ed},			/* 0.48000=f(0.48000, v4.48000)*/
-{64, 0,123,__LINE__, 0x3fdf5c28, 0xf5c28f73, 0x3fdf5c28, 0xf5c28f73, 0x4011f5c2, 0x8f5c28f7},			/* 0.49000=f(0.49000, v4.49000)*/
-{64, 0,123,__LINE__, 0x3fe00000, 0x0000000b, 0x3fe00000, 0x0000000b, 0x40120000, 0x00000001},			/* 0.50000=f(0.50000, v4.50000)*/
-{64, 0,123,__LINE__, 0x3fe051eb, 0x851eb85d, 0x3fe051eb, 0x851eb85d, 0x40120a3d, 0x70a3d70c},			/* 0.51000=f(0.51000, v4.51000)*/
-{64, 0,123,__LINE__, 0x3fe0a3d7, 0x0a3d70af, 0x3fe0a3d7, 0x0a3d70af, 0x4012147a, 0xe147ae16},			/* 0.52000=f(0.52000, v4.52000)*/
-{64, 0,123,__LINE__, 0x3fe0f5c2, 0x8f5c2901, 0x3fe0f5c2, 0x8f5c2901, 0x40121eb8, 0x51eb8520},			/* 0.53000=f(0.53000, v4.53000)*/
-{64, 0,123,__LINE__, 0x3fe147ae, 0x147ae153, 0x3fe147ae, 0x147ae153, 0x401228f5, 0xc28f5c2a},			/* 0.54000=f(0.54000, v4.54000)*/
-{64, 0,123,__LINE__, 0x3fe19999, 0x999999a5, 0x3fe19999, 0x999999a5, 0x40123333, 0x33333335},			/* 0.55000=f(0.55000, v4.55000)*/
-{64, 0,123,__LINE__, 0x3fe1eb85, 0x1eb851f7, 0x3fe1eb85, 0x1eb851f7, 0x40123d70, 0xa3d70a3f},			/* 0.56000=f(0.56000, v4.56000)*/
-{64, 0,123,__LINE__, 0x3fe23d70, 0xa3d70a49, 0x3fe23d70, 0xa3d70a49, 0x401247ae, 0x147ae149},			/* 0.57000=f(0.57000, v4.57000)*/
-{64, 0,123,__LINE__, 0x3fe28f5c, 0x28f5c29b, 0x3fe28f5c, 0x28f5c29b, 0x401251eb, 0x851eb853},			/* 0.58000=f(0.58000, v4.58000)*/
-{64, 0,123,__LINE__, 0x3fe2e147, 0xae147aed, 0x3fe2e147, 0xae147aed, 0x40125c28, 0xf5c28f5e},			/* 0.59000=f(0.59000, v4.59000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x3333333f, 0x3fe33333, 0x3333333f, 0x40126666, 0x66666668},			/* 0.60000=f(0.60000, v4.60000)*/
-{64, 0,123,__LINE__, 0x3fe3851e, 0xb851eb91, 0x3fe3851e, 0xb851eb91, 0x401270a3, 0xd70a3d72},			/* 0.61000=f(0.61000, v4.61000)*/
-{64, 0,123,__LINE__, 0x3fe3d70a, 0x3d70a3e3, 0x3fe3d70a, 0x3d70a3e3, 0x40127ae1, 0x47ae147c},			/* 0.62000=f(0.62000, v4.62000)*/
-{64, 0,123,__LINE__, 0x3fe428f5, 0xc28f5c35, 0x3fe428f5, 0xc28f5c35, 0x4012851e, 0xb851eb87},			/* 0.63000=f(0.63000, v4.63000)*/
-{64, 0,123,__LINE__, 0x3fe47ae1, 0x47ae1487, 0x3fe47ae1, 0x47ae1487, 0x40128f5c, 0x28f5c291},			/* 0.64000=f(0.64000, v4.64000)*/
-{64, 0,123,__LINE__, 0x3fe4cccc, 0xccccccd9, 0x3fe4cccc, 0xccccccd9, 0x40129999, 0x9999999b},			/* 0.65000=f(0.65000, v4.65000)*/
-{64, 0,123,__LINE__, 0x3fe51eb8, 0x51eb852b, 0x3fe51eb8, 0x51eb852b, 0x4012a3d7, 0x0a3d70a5},			/* 0.66000=f(0.66000, v4.66000)*/
-{64, 0,123,__LINE__, 0x3fe570a3, 0xd70a3d7d, 0x3fe570a3, 0xd70a3d7d, 0x4012ae14, 0x7ae147b0},			/* 0.67000=f(0.67000, v4.67000)*/
-{64, 0,123,__LINE__, 0x3fe5c28f, 0x5c28f5cf, 0x3fe5c28f, 0x5c28f5cf, 0x4012b851, 0xeb851eba},			/* 0.68000=f(0.68000, v4.68000)*/
-{64, 0,123,__LINE__, 0x3fe6147a, 0xe147ae21, 0x3fe6147a, 0xe147ae21, 0x4012c28f, 0x5c28f5c4},			/* 0.69000=f(0.69000, v4.69000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x66666673, 0x3fe66666, 0x66666673, 0x4012cccc, 0xccccccce},			/* 0.70000=f(0.70000, v4.70000)*/
-{64, 0,123,__LINE__, 0x3fe6b851, 0xeb851ec5, 0x3fe6b851, 0xeb851ec5, 0x4012d70a, 0x3d70a3d9},			/* 0.71000=f(0.71000, v4.71000)*/
-{64, 0,123,__LINE__, 0x3fe70a3d, 0x70a3d717, 0x3fe70a3d, 0x70a3d717, 0x4012e147, 0xae147ae3},			/* 0.72000=f(0.72000, v4.72000)*/
-{64, 0,123,__LINE__, 0x3fe75c28, 0xf5c28f69, 0x3fe75c28, 0xf5c28f69, 0x4012eb85, 0x1eb851ed},			/* 0.73000=f(0.73000, v4.73000)*/
-{64, 0,123,__LINE__, 0x3fe7ae14, 0x7ae147bb, 0x3fe7ae14, 0x7ae147bb, 0x4012f5c2, 0x8f5c28f7},			/* 0.74000=f(0.74000, v4.74000)*/
-{64, 0,123,__LINE__, 0x3fe80000, 0x0000000d, 0x3fe80000, 0x0000000d, 0x40130000, 0x00000002},			/* 0.75000=f(0.75000, v4.75000)*/
-{64, 0,123,__LINE__, 0x3fe851eb, 0x851eb85f, 0x3fe851eb, 0x851eb85f, 0x40130a3d, 0x70a3d70c},			/* 0.76000=f(0.76000, v4.76000)*/
-{64, 0,123,__LINE__, 0x3fe8a3d7, 0x0a3d70b1, 0x3fe8a3d7, 0x0a3d70b1, 0x4013147a, 0xe147ae16},			/* 0.77000=f(0.77000, v4.77000)*/
-{64, 0,123,__LINE__, 0x3fe8f5c2, 0x8f5c2903, 0x3fe8f5c2, 0x8f5c2903, 0x40131eb8, 0x51eb8520},			/* 0.78000=f(0.78000, v4.78000)*/
-{64, 0,123,__LINE__, 0x3fe947ae, 0x147ae155, 0x3fe947ae, 0x147ae155, 0x401328f5, 0xc28f5c2b},			/* 0.79000=f(0.79000, v4.79000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0x999999a7, 0x3fe99999, 0x999999a7, 0x40133333, 0x33333335},			/* 0.80000=f(0.80000, v4.80000)*/
-{64, 0,123,__LINE__, 0x3fe9eb85, 0x1eb851f9, 0x3fe9eb85, 0x1eb851f9, 0x40133d70, 0xa3d70a3f},			/* 0.81000=f(0.81000, v4.81000)*/
-{64, 0,123,__LINE__, 0x3fea3d70, 0xa3d70a4b, 0x3fea3d70, 0xa3d70a4b, 0x401347ae, 0x147ae149},			/* 0.82000=f(0.82000, v4.82000)*/
-{64, 0,123,__LINE__, 0x3fea8f5c, 0x28f5c29d, 0x3fea8f5c, 0x28f5c29d, 0x401351eb, 0x851eb854},			/* 0.83000=f(0.83000, v4.83000)*/
-{64, 0,123,__LINE__, 0x3feae147, 0xae147aef, 0x3feae147, 0xae147aef, 0x40135c28, 0xf5c28f5e},			/* 0.84000=f(0.84000, v4.84000)*/
-{64, 0,123,__LINE__, 0x3feb3333, 0x33333341, 0x3feb3333, 0x33333341, 0x40136666, 0x66666668},			/* 0.85000=f(0.85000, v4.85000)*/
-{64, 0,123,__LINE__, 0x3feb851e, 0xb851eb93, 0x3feb851e, 0xb851eb93, 0x401370a3, 0xd70a3d72},			/* 0.86000=f(0.86000, v4.86000)*/
-{64, 0,123,__LINE__, 0x3febd70a, 0x3d70a3e5, 0x3febd70a, 0x3d70a3e5, 0x40137ae1, 0x47ae147d},			/* 0.87000=f(0.87000, v4.87000)*/
-{64, 0,123,__LINE__, 0x3fec28f5, 0xc28f5c37, 0x3fec28f5, 0xc28f5c37, 0x4013851e, 0xb851eb87},			/* 0.88000=f(0.88000, v4.88000)*/
-{64, 0,123,__LINE__, 0x3fec7ae1, 0x47ae1489, 0x3fec7ae1, 0x47ae1489, 0x40138f5c, 0x28f5c291},			/* 0.89000=f(0.89000, v4.89000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xccccccdb, 0x3feccccc, 0xccccccdb, 0x40139999, 0x9999999b},			/* 0.90000=f(0.90000, v4.90000)*/
-{64, 0,123,__LINE__, 0x3fed1eb8, 0x51eb852d, 0x3fed1eb8, 0x51eb852d, 0x4013a3d7, 0x0a3d70a6},			/* 0.91000=f(0.91000, v4.91000)*/
-{64, 0,123,__LINE__, 0x3fed70a3, 0xd70a3d7f, 0x3fed70a3, 0xd70a3d7f, 0x4013ae14, 0x7ae147b0},			/* 0.92000=f(0.92000, v4.92000)*/
-{64, 0,123,__LINE__, 0x3fedc28f, 0x5c28f5d1, 0x3fedc28f, 0x5c28f5d1, 0x4013b851, 0xeb851eba},			/* 0.93000=f(0.93000, v4.93000)*/
-{64, 0,123,__LINE__, 0x3fee147a, 0xe147ae23, 0x3fee147a, 0xe147ae23, 0x4013c28f, 0x5c28f5c4},			/* 0.94000=f(0.94000, v4.94000)*/
-{64, 0,123,__LINE__, 0x3fee6666, 0x66666675, 0x3fee6666, 0x66666675, 0x4013cccc, 0xcccccccf},			/* 0.95000=f(0.95000, v4.95000)*/
-{64, 0,123,__LINE__, 0x3feeb851, 0xeb851ec7, 0x3feeb851, 0xeb851ec7, 0x4013d70a, 0x3d70a3d9},			/* 0.96000=f(0.96000, v4.96000)*/
-{64, 0,123,__LINE__, 0x3fef0a3d, 0x70a3d719, 0x3fef0a3d, 0x70a3d719, 0x4013e147, 0xae147ae3},			/* 0.97000=f(0.97000, v4.97000)*/
-{64, 0,123,__LINE__, 0x3fef5c28, 0xf5c28f6b, 0x3fef5c28, 0xf5c28f6b, 0x4013eb85, 0x1eb851ed},			/* 0.98000=f(0.98000, v4.98000)*/
-{64, 0,123,__LINE__, 0x3fefae14, 0x7ae147bd, 0x3fefae14, 0x7ae147bd, 0x4013f5c2, 0x8f5c28f8},			/* 0.99000=f(0.99000, v4.99000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000007, 0x3ff00000, 0x00000007, 0x40140000, 0x00000002},			/* 1.00000=f(1.00000, v5.00000)*/
-{64, 0,123,__LINE__, 0x3ff028f5, 0xc28f5c30, 0x3ff028f5, 0xc28f5c30, 0x40140a3d, 0x70a3d70c},			/* 1.01000=f(1.01000, v5.01000)*/
-{64, 0,123,__LINE__, 0x3ff051eb, 0x851eb859, 0x3ff051eb, 0x851eb859, 0x4014147a, 0xe147ae16},			/* 1.02000=f(1.02000, v5.02000)*/
-{64, 0,123,__LINE__, 0x3ff07ae1, 0x47ae1482, 0x3ff07ae1, 0x47ae1482, 0x40141eb8, 0x51eb8520},			/* 1.03000=f(1.03000, v5.03000)*/
-{64, 0,123,__LINE__, 0x3ff0a3d7, 0x0a3d70ab, 0x3ff0a3d7, 0x0a3d70ab, 0x401428f5, 0xc28f5c2b},			/* 1.04000=f(1.04000, v5.04000)*/
-{64, 0,123,__LINE__, 0x3ff0cccc, 0xccccccd4, 0x3ff0cccc, 0xccccccd4, 0x40143333, 0x33333335},			/* 1.05000=f(1.05000, v5.05000)*/
-{64, 0,123,__LINE__, 0x3ff0f5c2, 0x8f5c28fd, 0x3ff0f5c2, 0x8f5c28fd, 0x40143d70, 0xa3d70a3f},			/* 1.06000=f(1.06000, v5.06000)*/
-{64, 0,123,__LINE__, 0x3ff11eb8, 0x51eb8526, 0x3ff11eb8, 0x51eb8526, 0x401447ae, 0x147ae14a},			/* 1.07000=f(1.07000, v5.07000)*/
-{64, 0,123,__LINE__, 0x3ff147ae, 0x147ae14f, 0x3ff147ae, 0x147ae14f, 0x401451eb, 0x851eb854},			/* 1.08000=f(1.08000, v5.08000)*/
-{64, 0,123,__LINE__, 0x3ff170a3, 0xd70a3d78, 0x3ff170a3, 0xd70a3d78, 0x40145c28, 0xf5c28f5e},			/* 1.09000=f(1.09000, v5.09000)*/
-{64, 0,123,__LINE__, 0x3ff19999, 0x999999a1, 0x3ff19999, 0x999999a1, 0x40146666, 0x66666668},			/* 1.10000=f(1.10000, v5.10000)*/
-{64, 0,123,__LINE__, 0x3ff1c28f, 0x5c28f5ca, 0x3ff1c28f, 0x5c28f5ca, 0x401470a3, 0xd70a3d72},			/* 1.11000=f(1.11000, v5.11000)*/
-{64, 0,123,__LINE__, 0x3ff1eb85, 0x1eb851f3, 0x3ff1eb85, 0x1eb851f3, 0x40147ae1, 0x47ae147d},			/* 1.12000=f(1.12000, v5.12000)*/
-{64, 0,123,__LINE__, 0x3ff2147a, 0xe147ae1c, 0x3ff2147a, 0xe147ae1c, 0x4014851e, 0xb851eb87},			/* 1.13000=f(1.13000, v5.13000)*/
-{64, 0,123,__LINE__, 0x3ff23d70, 0xa3d70a45, 0x3ff23d70, 0xa3d70a45, 0x40148f5c, 0x28f5c291},			/* 1.14000=f(1.14000, v5.14000)*/
-{64, 0,123,__LINE__, 0x3ff26666, 0x6666666e, 0x3ff26666, 0x6666666e, 0x40149999, 0x9999999c},			/* 1.15000=f(1.15000, v5.15000)*/
-{64, 0,123,__LINE__, 0x3ff28f5c, 0x28f5c297, 0x3ff28f5c, 0x28f5c297, 0x4014a3d7, 0x0a3d70a6},			/* 1.16000=f(1.16000, v5.16000)*/
-{64, 0,123,__LINE__, 0x3ff2b851, 0xeb851ec0, 0x3ff2b851, 0xeb851ec0, 0x4014ae14, 0x7ae147b0},			/* 1.17000=f(1.17000, v5.17000)*/
-{64, 0,123,__LINE__, 0x3ff2e147, 0xae147ae9, 0x3ff2e147, 0xae147ae9, 0x4014b851, 0xeb851eba},			/* 1.18000=f(1.18000, v5.18000)*/
-{64, 0,123,__LINE__, 0x3ff30a3d, 0x70a3d712, 0x3ff30a3d, 0x70a3d712, 0x4014c28f, 0x5c28f5c4},			/* 1.19000=f(1.19000, v5.19000)*/
-{64, 0,123,__LINE__, 0xbffb7812, 0xaeef4ba0, 0xc01921fb, 0x54442d18, 0xc00243f6, 0xa8885a30},			/* -1.71681=f(-6.28318, v-2.28318)*/
-{64, 0,123,__LINE__, 0xbfdc0918, 0x40056e60, 0xc012d97c, 0x7f3321d2, 0xbfe6cbe3, 0xf9990e90},			/* -0.43805=f(-4.71238, v-0.71238)*/
-{64, 0,123,__LINE__, 0xbfe21fb5, 0x4442d180, 0xc00921fb, 0x54442d18, 0x3feb7812, 0xaeef4ba0},			/* -0.56637=f(-3.14159, v0.85840)*/
-{64, 0,123,__LINE__, 0xbff921fb, 0x54442d18, 0xbff921fb, 0x54442d18, 0x40036f02, 0x55dde974},			/* -1.57079=f(-1.57079, v2.42920)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000, 0x40100000, 0x00000000},			/* 0.00000=f(0.00000, v4.00000)*/
-{64, 0,123,__LINE__, 0x3ff921fb, 0x54442d18, 0x3ff921fb, 0x54442d18, 0x4016487e, 0xd5110b46},			/* 1.57079=f(1.57079, v5.57079)*/
-{64, 0,123,__LINE__, 0x400921fb, 0x54442d18, 0x400921fb, 0x54442d18, 0x401c90fd, 0xaa22168c},			/* 3.14159=f(3.14159, v7.14159)*/
-{64, 0,123,__LINE__, 0x4012d97c, 0x7f3321d2, 0x4012d97c, 0x7f3321d2, 0x40216cbe, 0x3f9990e9},			/* 4.71238=f(4.71238, v8.71238)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03e0000, 0x00000000, 0xc03a0000, 0x00000000},			/* -4.00000=f(-30.0000, v-26.0000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03c4ccc, 0xcccccccd, 0xc0384ccc, 0xcccccccd},			/* -4.00000=f(-28.3000, v-24.3000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03a9999, 0x9999999a, 0xc0369999, 0x9999999a},			/* -4.00000=f(-26.6000, v-22.6000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc038e666, 0x66666667, 0xc034e666, 0x66666667},			/* -4.00000=f(-24.9000, v-20.9000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0373333, 0x33333334, 0xc0333333, 0x33333334},			/* -4.00000=f(-23.2000, v-19.2000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0358000, 0x00000001, 0xc0318000, 0x00000001},			/* -4.00000=f(-21.5000, v-17.5000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc033cccc, 0xccccccce, 0xc02f9999, 0x9999999c},			/* -4.00000=f(-19.8000, v-15.8000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0321999, 0x9999999b, 0xc02c3333, 0x33333336},			/* -4.00000=f(-18.1000, v-14.1000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0306666, 0x66666668, 0xc028cccc, 0xccccccd0},			/* -4.00000=f(-16.4000, v-12.4000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc02d6666, 0x6666666a, 0xc0256666, 0x6666666a},			/* -4.00000=f(-14.7000, v-10.7000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc02a0000, 0x00000004, 0xc0220000, 0x00000004},			/* -4.00000=f(-13.0000, v-9.00000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0269999, 0x9999999e, 0xc01d3333, 0x3333333c},			/* -4.00000=f(-11.3000, v-7.30000)*/
-{64, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0233333, 0x33333338, 0xc0166666, 0x66666670},			/* -4.00000=f(-9.60000, v-5.60000)*/
-{64, 0,123,__LINE__, 0xbfb99999, 0x99999740, 0xc01f9999, 0x999999a3, 0xc00f3333, 0x33333346},			/* -0.00100=f(-7.90000, v-3.90000)*/
-{64, 0,123,__LINE__, 0xbffccccc, 0xcccccca8, 0xc018cccc, 0xccccccd6, 0xc0019999, 0x999999ac},			/* -1.80000=f(-6.20000, v-2.20000)*/
-{64, 0,123,__LINE__, 0xbfdfffff, 0xfffffc10, 0xc0120000, 0x00000009, 0xbfe00000, 0x00000048},			/* -0.50000=f(-4.50000, v-0.50000)*/
-{64, 0,123,__LINE__, 0xbfd99999, 0x99999b40, 0xc0066666, 0x66666678, 0x3ff33333, 0x33333310},			/* -0.40000=f(-2.80000, v1.20000)*/
-{64, 0,123,__LINE__, 0xbff19999, 0x999999bd, 0xbff19999, 0x999999bd, 0x40073333, 0x33333322},			/* -1.10000=f(-1.10000, v2.90000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x333332ec, 0x3fe33333, 0x333332ec, 0x40126666, 0x6666665e},			/* 0.60000=f(0.60000, v4.60000)*/
-{64, 0,123,__LINE__, 0x40026666, 0x66666654, 0x40026666, 0x66666654, 0x40193333, 0x3333332a},			/* 2.30000=f(2.30000, v6.30000)*/
-{64, 0,123,__LINE__, 0x400fffff, 0xffffffee, 0x400fffff, 0xffffffee, 0x401fffff, 0xfffffff7},			/* 4.00000=f(4.00000, v8.00000)*/
-{64, 0,123,__LINE__, 0x4016cccc, 0xccccccc4, 0x4016cccc, 0xccccccc4, 0x40236666, 0x66666662},			/* 5.70000=f(5.70000, v9.70000)*/
-{64, 0,123,__LINE__, 0x401d9999, 0x99999991, 0x401d9999, 0x99999991, 0x4026cccc, 0xccccccc8},			/* 7.40000=f(7.40000, v11.4000)*/
-{64, 0,123,__LINE__, 0x40223333, 0x3333332f, 0x40223333, 0x3333332f, 0x402a3333, 0x3333332f},			/* 9.10000=f(9.10000, v13.1000)*/
-{64, 0,123,__LINE__, 0x40259999, 0x99999995, 0x40259999, 0x99999995, 0x402d9999, 0x99999995},			/* 10.8000=f(10.8000, v14.8000)*/
-{64, 0,123,__LINE__, 0x4028ffff, 0xfffffffb, 0x4028ffff, 0xfffffffb, 0x40307fff, 0xfffffffe},			/* 12.5000=f(12.5000, v16.5000)*/
-{64, 0,123,__LINE__, 0x402c6666, 0x66666661, 0x402c6666, 0x66666661, 0x40323333, 0x33333330},			/* 14.2000=f(14.2000, v18.2000)*/
-{64, 0,123,__LINE__, 0x402fcccc, 0xccccccc7, 0x402fcccc, 0xccccccc7, 0x4033e666, 0x66666664},			/* 15.9000=f(15.9000, v19.9000)*/
-{64, 0,123,__LINE__, 0x40319999, 0x99999997, 0x40319999, 0x99999997, 0x40359999, 0x99999997},			/* 17.6000=f(17.6000, v21.6000)*/
-{64, 0,123,__LINE__, 0x40334ccc, 0xccccccca, 0x40334ccc, 0xccccccca, 0x40374ccc, 0xccccccca},			/* 19.3000=f(19.3000, v23.3000)*/
-{64, 0,123,__LINE__, 0x4034ffff, 0xfffffffd, 0x4034ffff, 0xfffffffd, 0x4038ffff, 0xfffffffd},			/* 21.0000=f(21.0000, v25.0000)*/
-{64, 0,123,__LINE__, 0x4036b333, 0x33333330, 0x4036b333, 0x33333330, 0x403ab333, 0x33333330},			/* 22.7000=f(22.7000, v26.7000)*/
-{64, 0,123,__LINE__, 0x40386666, 0x66666663, 0x40386666, 0x66666663, 0x403c6666, 0x66666663},			/* 24.4000=f(24.4000, v28.4000)*/
-{64, 0,123,__LINE__, 0x403a1999, 0x99999996, 0x403a1999, 0x99999996, 0x403e1999, 0x99999996},			/* 26.1000=f(26.1000, v30.1000)*/
-{64, 0,123,__LINE__, 0x403bcccc, 0xccccccc9, 0x403bcccc, 0xccccccc9, 0x403fcccc, 0xccccccc9},			/* 27.8000=f(27.8000, v31.8000)*/
-{64, 0,123,__LINE__, 0x403d7fff, 0xfffffffc, 0x403d7fff, 0xfffffffc, 0x4040bfff, 0xfffffffe},			/* 29.5000=f(29.5000, v33.5000)*/
-0,};
-test_fmod(m)   {run_vector_1(m,fmod_vec,(char *)(fmod),"fmod","ddd");   }	
diff --git a/newlib/libm/test/fmodf_vec.c b/newlib/libm/test/fmodf_vec.c
deleted file mode 100644
index f50eeda76..000000000
--- a/newlib/libm/test/fmodf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type fmodf_vec[] = {
-{ 0, 0,123,__LINE__, 0xbff33333, 0x40000000, 0xbff33333, 0x33333333, 0x40066666, 0x66666666},			/* -1.20000=f(-1.20000, v2.80000)*/
-{ 0, 0,123,__LINE__, 0xbff30a3d, 0x80000000, 0xbff30a3d, 0x70a3d70a, 0x40067ae1, 0x47ae147b},			/* -1.19000=f(-1.19000, v2.81000)*/
-{ 0, 0,123,__LINE__, 0xbff2e147, 0xa0000000, 0xbff2e147, 0xae147ae1, 0x40068f5c, 0x28f5c290},			/* -1.18000=f(-1.18000, v2.82000)*/
-{ 0, 0,123,__LINE__, 0xbff2b851, 0xe0000000, 0xbff2b851, 0xeb851eb8, 0x4006a3d7, 0x0a3d70a4},			/* -1.17000=f(-1.17000, v2.83000)*/
-{ 0, 0,123,__LINE__, 0xbff28f5c, 0x20000000, 0xbff28f5c, 0x28f5c28f, 0x4006b851, 0xeb851eb8},			/* -1.16000=f(-1.16000, v2.84000)*/
-{ 0, 0,123,__LINE__, 0xbff26666, 0x60000000, 0xbff26666, 0x66666666, 0x4006cccc, 0xcccccccd},			/* -1.15000=f(-1.15000, v2.85000)*/
-{ 0, 0,123,__LINE__, 0xbff23d70, 0xa0000000, 0xbff23d70, 0xa3d70a3d, 0x4006e147, 0xae147ae2},			/* -1.14000=f(-1.14000, v2.86000)*/
-{ 0, 0,123,__LINE__, 0xbff2147a, 0xe0000000, 0xbff2147a, 0xe147ae14, 0x4006f5c2, 0x8f5c28f6},			/* -1.13000=f(-1.13000, v2.87000)*/
-{ 0, 0,123,__LINE__, 0xbff1eb85, 0x20000000, 0xbff1eb85, 0x1eb851eb, 0x40070a3d, 0x70a3d70a},			/* -1.12000=f(-1.12000, v2.88000)*/
-{ 0, 0,123,__LINE__, 0xbff1c28f, 0x60000000, 0xbff1c28f, 0x5c28f5c2, 0x40071eb8, 0x51eb851f},			/* -1.11000=f(-1.11000, v2.89000)*/
-{ 0, 0,123,__LINE__, 0xbff19999, 0xa0000000, 0xbff19999, 0x99999999, 0x40073333, 0x33333334},			/* -1.10000=f(-1.10000, v2.90000)*/
-{ 0, 0,123,__LINE__, 0xbff170a3, 0xe0000000, 0xbff170a3, 0xd70a3d70, 0x400747ae, 0x147ae148},			/* -1.09000=f(-1.09000, v2.91000)*/
-{ 0, 0,123,__LINE__, 0xbff147ae, 0x20000000, 0xbff147ae, 0x147ae147, 0x40075c28, 0xf5c28f5c},			/* -1.08000=f(-1.08000, v2.92000)*/
-{ 0, 0,123,__LINE__, 0xbff11eb8, 0x60000000, 0xbff11eb8, 0x51eb851e, 0x400770a3, 0xd70a3d71},			/* -1.07000=f(-1.07000, v2.93000)*/
-{ 0, 0,123,__LINE__, 0xbff0f5c2, 0x80000000, 0xbff0f5c2, 0x8f5c28f5, 0x4007851e, 0xb851eb86},			/* -1.06000=f(-1.06000, v2.94000)*/
-{ 0, 0,123,__LINE__, 0xbff0cccc, 0xc0000000, 0xbff0cccc, 0xcccccccc, 0x40079999, 0x9999999a},			/* -1.05000=f(-1.05000, v2.95000)*/
-{ 0, 0,123,__LINE__, 0xbff0a3d7, 0x00000000, 0xbff0a3d7, 0x0a3d70a3, 0x4007ae14, 0x7ae147ae},			/* -1.04000=f(-1.04000, v2.96000)*/
-{ 0, 0,123,__LINE__, 0xbff07ae1, 0x40000000, 0xbff07ae1, 0x47ae147a, 0x4007c28f, 0x5c28f5c3},			/* -1.03000=f(-1.03000, v2.97000)*/
-{ 0, 0,123,__LINE__, 0xbff051eb, 0x80000000, 0xbff051eb, 0x851eb851, 0x4007d70a, 0x3d70a3d8},			/* -1.02000=f(-1.02000, v2.98000)*/
-{ 0, 0,123,__LINE__, 0xbff028f5, 0xc0000000, 0xbff028f5, 0xc28f5c28, 0x4007eb85, 0x1eb851ec},			/* -1.01000=f(-1.01000, v2.99000)*/
-{ 0, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xbfefffff, 0xfffffffe, 0x40080000, 0x00000000},			/* -1.00000=f(-0.01000, v3.00000)*/
-{ 0, 0,123,__LINE__, 0xbfefae14, 0x80000000, 0xbfefae14, 0x7ae147ac, 0x4008147a, 0xe147ae15},			/* -0.99000=f(-0.99000, v3.01000)*/
-{ 0, 0,123,__LINE__, 0xbfef5c29, 0x00000000, 0xbfef5c28, 0xf5c28f5a, 0x400828f5, 0xc28f5c2a},			/* -0.98000=f(-0.98000, v3.02000)*/
-{ 0, 0,123,__LINE__, 0xbfef0a3d, 0x80000000, 0xbfef0a3d, 0x70a3d708, 0x40083d70, 0xa3d70a3e},			/* -0.97000=f(-0.97000, v3.03000)*/
-{ 0, 0,123,__LINE__, 0xbfeeb851, 0xe0000000, 0xbfeeb851, 0xeb851eb6, 0x400851eb, 0x851eb852},			/* -0.95999=f(-0.96000, v3.04000)*/
-{ 0, 0,123,__LINE__, 0xbfee6666, 0x60000000, 0xbfee6666, 0x66666664, 0x40086666, 0x66666667},			/* -0.94999=f(-0.95000, v3.05000)*/
-{ 0, 0,123,__LINE__, 0xbfee147a, 0xe0000000, 0xbfee147a, 0xe147ae12, 0x40087ae1, 0x47ae147c},			/* -0.94000=f(-0.94000, v3.06000)*/
-{ 0, 0,123,__LINE__, 0xbfedc28f, 0x60000000, 0xbfedc28f, 0x5c28f5c0, 0x40088f5c, 0x28f5c290},			/* -0.93000=f(-0.93000, v3.07000)*/
-{ 0, 0,123,__LINE__, 0xbfed70a3, 0xe0000000, 0xbfed70a3, 0xd70a3d6e, 0x4008a3d7, 0x0a3d70a4},			/* -0.92000=f(-0.92000, v3.08000)*/
-{ 0, 0,123,__LINE__, 0xbfed1eb8, 0x60000000, 0xbfed1eb8, 0x51eb851c, 0x4008b851, 0xeb851eb9},			/* -0.91000=f(-0.91000, v3.09000)*/
-{ 0, 0,123,__LINE__, 0xbfeccccc, 0xc0000000, 0xbfeccccc, 0xccccccca, 0x4008cccc, 0xccccccce},			/* -0.89999=f(-0.90000, v3.10000)*/
-{ 0, 0,123,__LINE__, 0xbfec7ae1, 0x40000000, 0xbfec7ae1, 0x47ae1478, 0x4008e147, 0xae147ae2},			/* -0.88999=f(-0.89000, v3.11000)*/
-{ 0, 0,123,__LINE__, 0xbfec28f5, 0xc0000000, 0xbfec28f5, 0xc28f5c26, 0x4008f5c2, 0x8f5c28f6},			/* -0.88000=f(-0.88000, v3.12000)*/
-{ 0, 0,123,__LINE__, 0xbfebd70a, 0x40000000, 0xbfebd70a, 0x3d70a3d4, 0x40090a3d, 0x70a3d70b},			/* -0.87000=f(-0.87000, v3.13000)*/
-{ 0, 0,123,__LINE__, 0xbfeb851e, 0xc0000000, 0xbfeb851e, 0xb851eb82, 0x40091eb8, 0x51eb8520},			/* -0.86000=f(-0.86000, v3.14000)*/
-{ 0, 0,123,__LINE__, 0xbfeb3333, 0x40000000, 0xbfeb3333, 0x33333330, 0x40093333, 0x33333334},			/* -0.85000=f(-0.85000, v3.15000)*/
-{ 0, 0,123,__LINE__, 0xbfeae147, 0xa0000000, 0xbfeae147, 0xae147ade, 0x400947ae, 0x147ae148},			/* -0.83999=f(-0.84000, v3.16000)*/
-{ 0, 0,123,__LINE__, 0xbfea8f5c, 0x20000000, 0xbfea8f5c, 0x28f5c28c, 0x40095c28, 0xf5c28f5d},			/* -0.82999=f(-0.83000, v3.17000)*/
-{ 0, 0,123,__LINE__, 0xbfea3d70, 0xa0000000, 0xbfea3d70, 0xa3d70a3a, 0x400970a3, 0xd70a3d72},			/* -0.81999=f(-0.82000, v3.18000)*/
-{ 0, 0,123,__LINE__, 0xbfe9eb85, 0x20000000, 0xbfe9eb85, 0x1eb851e8, 0x4009851e, 0xb851eb86},			/* -0.81000=f(-0.81000, v3.19000)*/
-{ 0, 0,123,__LINE__, 0xbfe99999, 0xa0000000, 0xbfe99999, 0x99999996, 0x40099999, 0x9999999a},			/* -0.80000=f(-0.80000, v3.20000)*/
-{ 0, 0,123,__LINE__, 0xbfe947ae, 0x20000000, 0xbfe947ae, 0x147ae144, 0x4009ae14, 0x7ae147af},			/* -0.79000=f(-0.79000, v3.21000)*/
-{ 0, 0,123,__LINE__, 0xbfe8f5c2, 0x80000000, 0xbfe8f5c2, 0x8f5c28f2, 0x4009c28f, 0x5c28f5c4},			/* -0.77999=f(-0.78000, v3.22000)*/
-{ 0, 0,123,__LINE__, 0xbfe8a3d7, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0, 0x4009d70a, 0x3d70a3d8},			/* -0.76999=f(-0.77000, v3.23000)*/
-{ 0, 0,123,__LINE__, 0xbfe851eb, 0x80000000, 0xbfe851eb, 0x851eb84e, 0x4009eb85, 0x1eb851ec},			/* -0.75999=f(-0.76000, v3.24000)*/
-{ 0, 0,123,__LINE__, 0xbfe80000, 0x00000000, 0xbfe7ffff, 0xfffffffc, 0x400a0000, 0x00000001},			/* -0.75000=f(-0.75000, v3.25000)*/
-{ 0, 0,123,__LINE__, 0xbfe7ae14, 0x80000000, 0xbfe7ae14, 0x7ae147aa, 0x400a147a, 0xe147ae16},			/* -0.74000=f(-0.74000, v3.26000)*/
-{ 0, 0,123,__LINE__, 0xbfe75c29, 0x00000000, 0xbfe75c28, 0xf5c28f58, 0x400a28f5, 0xc28f5c2a},			/* -0.73000=f(-0.73000, v3.27000)*/
-{ 0, 0,123,__LINE__, 0xbfe70a3d, 0x80000000, 0xbfe70a3d, 0x70a3d706, 0x400a3d70, 0xa3d70a3e},			/* -0.72000=f(-0.72000, v3.28000)*/
-{ 0, 0,123,__LINE__, 0xbfe6b851, 0xe0000000, 0xbfe6b851, 0xeb851eb4, 0x400a51eb, 0x851eb853},			/* -0.70999=f(-0.71000, v3.29000)*/
-{ 0, 0,123,__LINE__, 0xbfe66666, 0x60000000, 0xbfe66666, 0x66666662, 0x400a6666, 0x66666668},			/* -0.69999=f(-0.70000, v3.30000)*/
-{ 0, 0,123,__LINE__, 0xbfe6147a, 0xe0000000, 0xbfe6147a, 0xe147ae10, 0x400a7ae1, 0x47ae147c},			/* -0.69000=f(-0.69000, v3.31000)*/
-{ 0, 0,123,__LINE__, 0xbfe5c28f, 0x60000000, 0xbfe5c28f, 0x5c28f5be, 0x400a8f5c, 0x28f5c290},			/* -0.68000=f(-0.68000, v3.32000)*/
-{ 0, 0,123,__LINE__, 0xbfe570a3, 0xe0000000, 0xbfe570a3, 0xd70a3d6c, 0x400aa3d7, 0x0a3d70a5},			/* -0.67000=f(-0.67000, v3.33000)*/
-{ 0, 0,123,__LINE__, 0xbfe51eb8, 0x60000000, 0xbfe51eb8, 0x51eb851a, 0x400ab851, 0xeb851eba},			/* -0.66000=f(-0.66000, v3.34000)*/
-{ 0, 0,123,__LINE__, 0xbfe4cccc, 0xc0000000, 0xbfe4cccc, 0xccccccc8, 0x400acccc, 0xccccccce},			/* -0.64999=f(-0.65000, v3.35000)*/
-{ 0, 0,123,__LINE__, 0xbfe47ae1, 0x40000000, 0xbfe47ae1, 0x47ae1476, 0x400ae147, 0xae147ae2},			/* -0.63999=f(-0.64000, v3.36000)*/
-{ 0, 0,123,__LINE__, 0xbfe428f5, 0xc0000000, 0xbfe428f5, 0xc28f5c24, 0x400af5c2, 0x8f5c28f7},			/* -0.63000=f(-0.63000, v3.37000)*/
-{ 0, 0,123,__LINE__, 0xbfe3d70a, 0x40000000, 0xbfe3d70a, 0x3d70a3d2, 0x400b0a3d, 0x70a3d70c},			/* -0.62000=f(-0.62000, v3.38000)*/
-{ 0, 0,123,__LINE__, 0xbfe3851e, 0xc0000000, 0xbfe3851e, 0xb851eb80, 0x400b1eb8, 0x51eb8520},			/* -0.61000=f(-0.61000, v3.39000)*/
-{ 0, 0,123,__LINE__, 0xbfe33333, 0x40000000, 0xbfe33333, 0x3333332e, 0x400b3333, 0x33333334},			/* -0.60000=f(-0.60000, v3.40000)*/
-{ 0, 0,123,__LINE__, 0xbfe2e147, 0xa0000000, 0xbfe2e147, 0xae147adc, 0x400b47ae, 0x147ae149},			/* -0.58999=f(-0.59000, v3.41000)*/
-{ 0, 0,123,__LINE__, 0xbfe28f5c, 0x20000000, 0xbfe28f5c, 0x28f5c28a, 0x400b5c28, 0xf5c28f5e},			/* -0.57999=f(-0.58000, v3.42000)*/
-{ 0, 0,123,__LINE__, 0xbfe23d70, 0xa0000000, 0xbfe23d70, 0xa3d70a38, 0x400b70a3, 0xd70a3d72},			/* -0.56999=f(-0.57000, v3.43000)*/
-{ 0, 0,123,__LINE__, 0xbfe1eb85, 0x20000000, 0xbfe1eb85, 0x1eb851e6, 0x400b851e, 0xb851eb86},			/* -0.56000=f(-0.56000, v3.44000)*/
-{ 0, 0,123,__LINE__, 0xbfe19999, 0xa0000000, 0xbfe19999, 0x99999994, 0x400b9999, 0x9999999b},			/* -0.55000=f(-0.55000, v3.45000)*/
-{ 0, 0,123,__LINE__, 0xbfe147ae, 0x20000000, 0xbfe147ae, 0x147ae142, 0x400bae14, 0x7ae147b0},			/* -0.54000=f(-0.54000, v3.46000)*/
-{ 0, 0,123,__LINE__, 0xbfe0f5c2, 0x80000000, 0xbfe0f5c2, 0x8f5c28f0, 0x400bc28f, 0x5c28f5c4},			/* -0.52999=f(-0.53000, v3.47000)*/
-{ 0, 0,123,__LINE__, 0xbfe0a3d7, 0x00000000, 0xbfe0a3d7, 0x0a3d709e, 0x400bd70a, 0x3d70a3d8},			/* -0.51999=f(-0.52000, v3.48000)*/
-{ 0, 0,123,__LINE__, 0xbfe051eb, 0x80000000, 0xbfe051eb, 0x851eb84c, 0x400beb85, 0x1eb851ed},			/* -0.50999=f(-0.51000, v3.49000)*/
-{ 0, 0,123,__LINE__, 0xbfe00000, 0x00000000, 0xbfdfffff, 0xfffffff4, 0x400c0000, 0x00000002},			/* -0.50000=f(-0.50000, v3.50000)*/
-{ 0, 0,123,__LINE__, 0xbfdf5c29, 0x00000000, 0xbfdf5c28, 0xf5c28f50, 0x400c147a, 0xe147ae16},			/* -0.49000=f(-0.49000, v3.51000)*/
-{ 0, 0,123,__LINE__, 0xbfdeb851, 0xe0000000, 0xbfdeb851, 0xeb851eac, 0x400c28f5, 0xc28f5c2a},			/* -0.47999=f(-0.48000, v3.52000)*/
-{ 0, 0,123,__LINE__, 0xbfde147a, 0xe0000000, 0xbfde147a, 0xe147ae08, 0x400c3d70, 0xa3d70a3f},			/* -0.47000=f(-0.47000, v3.53000)*/
-{ 0, 0,123,__LINE__, 0xbfdd70a3, 0xe0000000, 0xbfdd70a3, 0xd70a3d64, 0x400c51eb, 0x851eb854},			/* -0.46000=f(-0.46000, v3.54000)*/
-{ 0, 0,123,__LINE__, 0xbfdccccc, 0xc0000000, 0xbfdccccc, 0xccccccc0, 0x400c6666, 0x66666668},			/* -0.44999=f(-0.45000, v3.55000)*/
-{ 0, 0,123,__LINE__, 0xbfdc28f5, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c, 0x400c7ae1, 0x47ae147c},			/* -0.44000=f(-0.44000, v3.56000)*/
-{ 0, 0,123,__LINE__, 0xbfdb851e, 0xc0000000, 0xbfdb851e, 0xb851eb78, 0x400c8f5c, 0x28f5c291},			/* -0.43000=f(-0.43000, v3.57000)*/
-{ 0, 0,123,__LINE__, 0xbfdae147, 0xa0000000, 0xbfdae147, 0xae147ad4, 0x400ca3d7, 0x0a3d70a6},			/* -0.41999=f(-0.42000, v3.58000)*/
-{ 0, 0,123,__LINE__, 0xbfda3d70, 0xa0000000, 0xbfda3d70, 0xa3d70a30, 0x400cb851, 0xeb851eba},			/* -0.41000=f(-0.41000, v3.59000)*/
-{ 0, 0,123,__LINE__, 0xbfd99999, 0xa0000000, 0xbfd99999, 0x9999998c, 0x400ccccc, 0xccccccce},			/* -0.40000=f(-0.40000, v3.60000)*/
-{ 0, 0,123,__LINE__, 0xbfd8f5c2, 0x80000000, 0xbfd8f5c2, 0x8f5c28e8, 0x400ce147, 0xae147ae3},			/* -0.38999=f(-0.39000, v3.61000)*/
-{ 0, 0,123,__LINE__, 0xbfd851eb, 0x80000000, 0xbfd851eb, 0x851eb844, 0x400cf5c2, 0x8f5c28f8},			/* -0.38000=f(-0.38000, v3.62000)*/
-{ 0, 0,123,__LINE__, 0xbfd7ae14, 0x80000000, 0xbfd7ae14, 0x7ae147a0, 0x400d0a3d, 0x70a3d70c},			/* -0.37000=f(-0.37000, v3.63000)*/
-{ 0, 0,123,__LINE__, 0xbfd70a3d, 0x80000000, 0xbfd70a3d, 0x70a3d6fc, 0x400d1eb8, 0x51eb8520},			/* -0.36000=f(-0.36000, v3.64000)*/
-{ 0, 0,123,__LINE__, 0xbfd66666, 0x60000000, 0xbfd66666, 0x66666658, 0x400d3333, 0x33333335},			/* -0.34999=f(-0.35000, v3.65000)*/
-{ 0, 0,123,__LINE__, 0xbfd5c28f, 0x60000000, 0xbfd5c28f, 0x5c28f5b4, 0x400d47ae, 0x147ae14a},			/* -0.34000=f(-0.34000, v3.66000)*/
-{ 0, 0,123,__LINE__, 0xbfd51eb8, 0x60000000, 0xbfd51eb8, 0x51eb8510, 0x400d5c28, 0xf5c28f5e},			/* -0.33000=f(-0.33000, v3.67000)*/
-{ 0, 0,123,__LINE__, 0xbfd47ae1, 0x40000000, 0xbfd47ae1, 0x47ae146c, 0x400d70a3, 0xd70a3d72},			/* -0.31999=f(-0.32000, v3.68000)*/
-{ 0, 0,123,__LINE__, 0xbfd3d70a, 0x40000000, 0xbfd3d70a, 0x3d70a3c8, 0x400d851e, 0xb851eb87},			/* -0.31000=f(-0.31000, v3.69000)*/
-{ 0, 0,123,__LINE__, 0xbfd33333, 0x40000000, 0xbfd33333, 0x33333324, 0x400d9999, 0x9999999c},			/* -0.30000=f(-0.30000, v3.70000)*/
-{ 0, 0,123,__LINE__, 0xbfd28f5c, 0x20000000, 0xbfd28f5c, 0x28f5c280, 0x400dae14, 0x7ae147b0},			/* -0.28999=f(-0.29000, v3.71000)*/
-{ 0, 0,123,__LINE__, 0xbfd1eb85, 0x20000000, 0xbfd1eb85, 0x1eb851dc, 0x400dc28f, 0x5c28f5c4},			/* -0.28000=f(-0.28000, v3.72000)*/
-{ 0, 0,123,__LINE__, 0xbfd147ae, 0x20000000, 0xbfd147ae, 0x147ae138, 0x400dd70a, 0x3d70a3d9},			/* -0.27000=f(-0.27000, v3.73000)*/
-{ 0, 0,123,__LINE__, 0xbfd0a3d7, 0x00000000, 0xbfd0a3d7, 0x0a3d7094, 0x400deb85, 0x1eb851ee},			/* -0.25999=f(-0.26000, v3.74000)*/
-{ 0, 0,123,__LINE__, 0xbfd00000, 0x00000000, 0xbfcfffff, 0xffffffe0, 0x400e0000, 0x00000002},			/* -0.25000=f(-0.25000, v3.75000)*/
-{ 0, 0,123,__LINE__, 0xbfceb851, 0xe0000000, 0xbfceb851, 0xeb851e98, 0x400e147a, 0xe147ae16},			/* -0.23999=f(-0.24000, v3.76000)*/
-{ 0, 0,123,__LINE__, 0xbfcd70a3, 0xe0000000, 0xbfcd70a3, 0xd70a3d50, 0x400e28f5, 0xc28f5c2b},			/* -0.23000=f(-0.23000, v3.77000)*/
-{ 0, 0,123,__LINE__, 0xbfcc28f5, 0xc0000000, 0xbfcc28f5, 0xc28f5c08, 0x400e3d70, 0xa3d70a40},			/* -0.22000=f(-0.22000, v3.78000)*/
-{ 0, 0,123,__LINE__, 0xbfcae147, 0xa0000000, 0xbfcae147, 0xae147ac0, 0x400e51eb, 0x851eb854},			/* -0.20999=f(-0.21000, v3.79000)*/
-{ 0, 0,123,__LINE__, 0xbfc99999, 0xa0000000, 0xbfc99999, 0x99999978, 0x400e6666, 0x66666668},			/* -0.20000=f(-0.20000, v3.80000)*/
-{ 0, 0,123,__LINE__, 0xbfc851eb, 0x80000000, 0xbfc851eb, 0x851eb830, 0x400e7ae1, 0x47ae147d},			/* -0.19000=f(-0.19000, v3.81000)*/
-{ 0, 0,123,__LINE__, 0xbfc70a3d, 0x80000000, 0xbfc70a3d, 0x70a3d6e8, 0x400e8f5c, 0x28f5c292},			/* -0.18000=f(-0.18000, v3.82000)*/
-{ 0, 0,123,__LINE__, 0xbfc5c28f, 0x60000000, 0xbfc5c28f, 0x5c28f5a0, 0x400ea3d7, 0x0a3d70a6},			/* -0.17000=f(-0.17000, v3.83000)*/
-{ 0, 0,123,__LINE__, 0xbfc47ae1, 0x40000000, 0xbfc47ae1, 0x47ae1458, 0x400eb851, 0xeb851eba},			/* -0.16000=f(-0.16000, v3.84000)*/
-{ 0, 0,123,__LINE__, 0xbfc33333, 0x40000000, 0xbfc33333, 0x33333310, 0x400ecccc, 0xcccccccf},			/* -0.15000=f(-0.15000, v3.85000)*/
-{ 0, 0,123,__LINE__, 0xbfc1eb85, 0x20000000, 0xbfc1eb85, 0x1eb851c8, 0x400ee147, 0xae147ae4},			/* -0.14000=f(-0.14000, v3.86000)*/
-{ 0, 0,123,__LINE__, 0xbfc0a3d7, 0x00000000, 0xbfc0a3d7, 0x0a3d7080, 0x400ef5c2, 0x8f5c28f8},			/* -0.13000=f(-0.13000, v3.87000)*/
-{ 0, 0,123,__LINE__, 0xbfbeb851, 0xe0000000, 0xbfbeb851, 0xeb851e71, 0x400f0a3d, 0x70a3d70c},			/* -0.12000=f(-0.12000, v3.88000)*/
-{ 0, 0,123,__LINE__, 0xbfbc28f5, 0xc0000000, 0xbfbc28f5, 0xc28f5be2, 0x400f1eb8, 0x51eb8521},			/* -0.11000=f(-0.11000, v3.89000)*/
-{ 0, 0,123,__LINE__, 0xbfb99999, 0xa0000000, 0xbfb99999, 0x99999953, 0x400f3333, 0x33333335},			/* -0.10000=f(-0.00100, v3.90000)*/
-{ 0, 0,123,__LINE__, 0xbfb70a3d, 0x80000000, 0xbfb70a3d, 0x70a3d6c4, 0x400f47ae, 0x147ae14a},			/* -0.09000=f(-0.09000, v3.91000)*/
-{ 0, 0,123,__LINE__, 0xbfb47ae1, 0x40000000, 0xbfb47ae1, 0x47ae1435, 0x400f5c28, 0xf5c28f5e},			/* -0.07999=f(-0.08000, v3.92000)*/
-{ 0, 0,123,__LINE__, 0xbfb1eb85, 0x20000000, 0xbfb1eb85, 0x1eb851a6, 0x400f70a3, 0xd70a3d73},			/* -0.07000=f(-0.07000, v3.93000)*/
-{ 0, 0,123,__LINE__, 0xbfaeb851, 0xe0000000, 0xbfaeb851, 0xeb851e2d, 0x400f851e, 0xb851eb87},			/* -0.05999=f(-0.06000, v3.94000)*/
-{ 0, 0,123,__LINE__, 0xbfa99999, 0xa0000000, 0xbfa99999, 0x9999990e, 0x400f9999, 0x9999999c},			/* -0.05000=f(-0.05000, v3.95000)*/
-{ 0, 0,123,__LINE__, 0xbfa47ae1, 0x40000000, 0xbfa47ae1, 0x47ae13ef, 0x400fae14, 0x7ae147b0},			/* -0.03999=f(-0.04000, v3.96000)*/
-{ 0, 0,123,__LINE__, 0xbf9eb851, 0xe0000000, 0xbf9eb851, 0xeb851da0, 0x400fc28f, 0x5c28f5c5},			/* -0.02999=f(-0.03000, v3.97000)*/
-{ 0, 0,123,__LINE__, 0xbf947ae1, 0x40000000, 0xbf947ae1, 0x47ae1362, 0x400fd70a, 0x3d70a3d9},			/* -0.01999=f(-0.02000, v3.98000)*/
-{ 0, 0,123,__LINE__, 0xbf847ae1, 0x40000000, 0xbf847ae1, 0x47ae1249, 0x400feb85, 0x1eb851ee},			/* -0.00999=f(-0.00010, v3.99000)*/
-{ 1, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000, 0x40100000, 0x00000001},			/* 9.74915e-16=f(9.74915e-16, v4.00000)*/
-{ 1, 0,123,__LINE__, 0x3f847ae1, 0x40000000, 0x3f847ae1, 0x47ae16ad, 0x40100a3d, 0x70a3d70b},			/* 0.00999=f(0.01000, v4.01000)*/
-{ 1, 0,123,__LINE__, 0x3f947ae1, 0x40000000, 0x3f947ae1, 0x47ae1594, 0x4010147a, 0xe147ae16},			/* 0.01999=f(0.02000, v4.02000)*/
-{ 1, 0,123,__LINE__, 0x3f9eb851, 0xe0000000, 0x3f9eb851, 0xeb851fd2, 0x40101eb8, 0x51eb8520},			/* 0.02999=f(0.03000, v4.03000)*/
-{ 1, 0,123,__LINE__, 0x3fa47ae1, 0x40000000, 0x3fa47ae1, 0x47ae1508, 0x401028f5, 0xc28f5c2a},			/* 0.03999=f(0.04000, v4.04000)*/
-{ 1, 0,123,__LINE__, 0x3fa99999, 0xa0000000, 0x3fa99999, 0x99999a27, 0x40103333, 0x33333334},			/* 0.05000=f(0.05000, v4.05000)*/
-{ 1, 0,123,__LINE__, 0x3faeb851, 0xe0000000, 0x3faeb851, 0xeb851f46, 0x40103d70, 0xa3d70a3f},			/* 0.05999=f(0.06000, v4.06000)*/
-{ 1, 0,123,__LINE__, 0x3fb1eb85, 0x20000000, 0x3fb1eb85, 0x1eb85232, 0x401047ae, 0x147ae149},			/* 0.07000=f(0.07000, v4.07000)*/
-{ 1, 0,123,__LINE__, 0x3fb47ae1, 0x40000000, 0x3fb47ae1, 0x47ae14c1, 0x401051eb, 0x851eb853},			/* 0.07999=f(0.08000, v4.08000)*/
-{ 1, 0,123,__LINE__, 0x3fb70a3d, 0x80000000, 0x3fb70a3d, 0x70a3d750, 0x40105c28, 0xf5c28f5d},			/* 0.09000=f(0.09000, v4.09000)*/
-{ 1, 0,123,__LINE__, 0x3fb99999, 0xa0000000, 0x3fb99999, 0x999999df, 0x40106666, 0x66666667},			/* 0.10000=f(0.10000, v4.10000)*/
-{ 1, 0,123,__LINE__, 0x3fbc28f5, 0xc0000000, 0x3fbc28f5, 0xc28f5c6e, 0x401070a3, 0xd70a3d72},			/* 0.11000=f(0.11000, v4.11000)*/
-{ 1, 0,123,__LINE__, 0x3fbeb851, 0xe0000000, 0x3fbeb851, 0xeb851efd, 0x40107ae1, 0x47ae147c},			/* 0.12000=f(0.12000, v4.12000)*/
-{ 1, 0,123,__LINE__, 0x3fc0a3d7, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6, 0x4010851e, 0xb851eb86},			/* 0.13000=f(0.13000, v4.13000)*/
-{ 1, 0,123,__LINE__, 0x3fc1eb85, 0x20000000, 0x3fc1eb85, 0x1eb8520e, 0x40108f5c, 0x28f5c290},			/* 0.14000=f(0.14000, v4.14000)*/
-{ 1, 0,123,__LINE__, 0x3fc33333, 0x40000000, 0x3fc33333, 0x33333356, 0x40109999, 0x9999999b},			/* 0.15000=f(0.15000, v4.15000)*/
-{ 1, 0,123,__LINE__, 0x3fc47ae1, 0x40000000, 0x3fc47ae1, 0x47ae149e, 0x4010a3d7, 0x0a3d70a5},			/* 0.16000=f(0.16000, v4.16000)*/
-{ 1, 0,123,__LINE__, 0x3fc5c28f, 0x60000000, 0x3fc5c28f, 0x5c28f5e6, 0x4010ae14, 0x7ae147af},			/* 0.17000=f(0.17000, v4.17000)*/
-{ 1, 0,123,__LINE__, 0x3fc70a3d, 0x80000000, 0x3fc70a3d, 0x70a3d72e, 0x4010b851, 0xeb851eb9},			/* 0.18000=f(0.18000, v4.18000)*/
-{ 1, 0,123,__LINE__, 0x3fc851eb, 0x80000000, 0x3fc851eb, 0x851eb876, 0x4010c28f, 0x5c28f5c4},			/* 0.19000=f(0.19000, v4.19000)*/
-{ 1, 0,123,__LINE__, 0x3fc99999, 0xa0000000, 0x3fc99999, 0x999999be, 0x4010cccc, 0xccccccce},			/* 0.20000=f(0.20000, v4.20000)*/
-{ 1, 0,123,__LINE__, 0x3fcae147, 0xa0000000, 0x3fcae147, 0xae147b06, 0x4010d70a, 0x3d70a3d8},			/* 0.20999=f(0.21000, v4.21000)*/
-{ 1, 0,123,__LINE__, 0x3fcc28f5, 0xc0000000, 0x3fcc28f5, 0xc28f5c4e, 0x4010e147, 0xae147ae2},			/* 0.22000=f(0.22000, v4.22000)*/
-{ 1, 0,123,__LINE__, 0x3fcd70a3, 0xe0000000, 0x3fcd70a3, 0xd70a3d96, 0x4010eb85, 0x1eb851ed},			/* 0.23000=f(0.23000, v4.23000)*/
-{ 1, 0,123,__LINE__, 0x3fceb851, 0xe0000000, 0x3fceb851, 0xeb851ede, 0x4010f5c2, 0x8f5c28f7},			/* 0.23999=f(0.24000, v4.24000)*/
-{ 1, 0,123,__LINE__, 0x3fd00000, 0x00000000, 0x3fd00000, 0x00000013, 0x40110000, 0x00000001},			/* 0.25000=f(0.25000, v4.25000)*/
-{ 1, 0,123,__LINE__, 0x3fd0a3d7, 0x00000000, 0x3fd0a3d7, 0x0a3d70b7, 0x40110a3d, 0x70a3d70b},			/* 0.25999=f(0.26000, v4.26000)*/
-{ 1, 0,123,__LINE__, 0x3fd147ae, 0x20000000, 0x3fd147ae, 0x147ae15b, 0x4011147a, 0xe147ae16},			/* 0.27000=f(0.27000, v4.27000)*/
-{ 1, 0,123,__LINE__, 0x3fd1eb85, 0x20000000, 0x3fd1eb85, 0x1eb851ff, 0x40111eb8, 0x51eb8520},			/* 0.28000=f(0.28000, v4.28000)*/
-{ 1, 0,123,__LINE__, 0x3fd28f5c, 0x20000000, 0x3fd28f5c, 0x28f5c2a3, 0x401128f5, 0xc28f5c2a},			/* 0.28999=f(0.29000, v4.29000)*/
-{ 1, 0,123,__LINE__, 0x3fd33333, 0x40000000, 0x3fd33333, 0x33333347, 0x40113333, 0x33333334},			/* 0.30000=f(0.30000, v4.30000)*/
-{ 1, 0,123,__LINE__, 0x3fd3d70a, 0x40000000, 0x3fd3d70a, 0x3d70a3eb, 0x40113d70, 0xa3d70a3f},			/* 0.31000=f(0.31000, v4.31000)*/
-{ 1, 0,123,__LINE__, 0x3fd47ae1, 0x40000000, 0x3fd47ae1, 0x47ae148f, 0x401147ae, 0x147ae149},			/* 0.31999=f(0.32000, v4.32000)*/
-{ 1, 0,123,__LINE__, 0x3fd51eb8, 0x60000000, 0x3fd51eb8, 0x51eb8533, 0x401151eb, 0x851eb853},			/* 0.33000=f(0.33000, v4.33000)*/
-{ 1, 0,123,__LINE__, 0x3fd5c28f, 0x60000000, 0x3fd5c28f, 0x5c28f5d7, 0x40115c28, 0xf5c28f5d},			/* 0.34000=f(0.34000, v4.34000)*/
-{ 1, 0,123,__LINE__, 0x3fd66666, 0x60000000, 0x3fd66666, 0x6666667b, 0x40116666, 0x66666668},			/* 0.34999=f(0.35000, v4.35000)*/
-{ 1, 0,123,__LINE__, 0x3fd70a3d, 0x80000000, 0x3fd70a3d, 0x70a3d71f, 0x401170a3, 0xd70a3d72},			/* 0.36000=f(0.36000, v4.36000)*/
-{ 1, 0,123,__LINE__, 0x3fd7ae14, 0x80000000, 0x3fd7ae14, 0x7ae147c3, 0x40117ae1, 0x47ae147c},			/* 0.37000=f(0.37000, v4.37000)*/
-{ 1, 0,123,__LINE__, 0x3fd851eb, 0x80000000, 0x3fd851eb, 0x851eb867, 0x4011851e, 0xb851eb86},			/* 0.38000=f(0.38000, v4.38000)*/
-{ 1, 0,123,__LINE__, 0x3fd8f5c2, 0x80000000, 0x3fd8f5c2, 0x8f5c290b, 0x40118f5c, 0x28f5c291},			/* 0.38999=f(0.39000, v4.39000)*/
-{ 1, 0,123,__LINE__, 0x3fd99999, 0xa0000000, 0x3fd99999, 0x999999af, 0x40119999, 0x9999999b},			/* 0.40000=f(0.40000, v4.40000)*/
-{ 1, 0,123,__LINE__, 0x3fda3d70, 0xa0000000, 0x3fda3d70, 0xa3d70a53, 0x4011a3d7, 0x0a3d70a5},			/* 0.41000=f(0.41000, v4.41000)*/
-{ 1, 0,123,__LINE__, 0x3fdae147, 0xa0000000, 0x3fdae147, 0xae147af7, 0x4011ae14, 0x7ae147af},			/* 0.41999=f(0.42000, v4.42000)*/
-{ 1, 0,123,__LINE__, 0x3fdb851e, 0xc0000000, 0x3fdb851e, 0xb851eb9b, 0x4011b851, 0xeb851eba},			/* 0.43000=f(0.43000, v4.43000)*/
-{ 1, 0,123,__LINE__, 0x3fdc28f5, 0xc0000000, 0x3fdc28f5, 0xc28f5c3f, 0x4011c28f, 0x5c28f5c4},			/* 0.44000=f(0.44000, v4.44000)*/
-{ 1, 0,123,__LINE__, 0x3fdccccc, 0xc0000000, 0x3fdccccc, 0xcccccce3, 0x4011cccc, 0xccccccce},			/* 0.44999=f(0.45000, v4.45000)*/
-{ 1, 0,123,__LINE__, 0x3fdd70a3, 0xe0000000, 0x3fdd70a3, 0xd70a3d87, 0x4011d70a, 0x3d70a3d8},			/* 0.46000=f(0.46000, v4.46000)*/
-{ 1, 0,123,__LINE__, 0x3fde147a, 0xe0000000, 0x3fde147a, 0xe147ae2b, 0x4011e147, 0xae147ae3},			/* 0.47000=f(0.47000, v4.47000)*/
-{ 1, 0,123,__LINE__, 0x3fdeb851, 0xe0000000, 0x3fdeb851, 0xeb851ecf, 0x4011eb85, 0x1eb851ed},			/* 0.47999=f(0.48000, v4.48000)*/
-{ 1, 0,123,__LINE__, 0x3fdf5c29, 0x00000000, 0x3fdf5c28, 0xf5c28f73, 0x4011f5c2, 0x8f5c28f7},			/* 0.49000=f(0.49000, v4.49000)*/
-{ 1, 0,123,__LINE__, 0x3fe00000, 0x00000000, 0x3fe00000, 0x0000000b, 0x40120000, 0x00000001},			/* 0.50000=f(0.50000, v4.50000)*/
-{ 1, 0,123,__LINE__, 0x3fe051eb, 0x80000000, 0x3fe051eb, 0x851eb85d, 0x40120a3d, 0x70a3d70c},			/* 0.50999=f(0.51000, v4.51000)*/
-{ 1, 0,123,__LINE__, 0x3fe0a3d7, 0x00000000, 0x3fe0a3d7, 0x0a3d70af, 0x4012147a, 0xe147ae16},			/* 0.51999=f(0.52000, v4.52000)*/
-{ 1, 0,123,__LINE__, 0x3fe0f5c2, 0x80000000, 0x3fe0f5c2, 0x8f5c2901, 0x40121eb8, 0x51eb8520},			/* 0.52999=f(0.53000, v4.53000)*/
-{ 1, 0,123,__LINE__, 0x3fe147ae, 0x20000000, 0x3fe147ae, 0x147ae153, 0x401228f5, 0xc28f5c2a},			/* 0.54000=f(0.54000, v4.54000)*/
-{ 1, 0,123,__LINE__, 0x3fe19999, 0xa0000000, 0x3fe19999, 0x999999a5, 0x40123333, 0x33333335},			/* 0.55000=f(0.55000, v4.55000)*/
-{ 1, 0,123,__LINE__, 0x3fe1eb85, 0x20000000, 0x3fe1eb85, 0x1eb851f7, 0x40123d70, 0xa3d70a3f},			/* 0.56000=f(0.56000, v4.56000)*/
-{ 1, 0,123,__LINE__, 0x3fe23d70, 0xa0000000, 0x3fe23d70, 0xa3d70a49, 0x401247ae, 0x147ae149},			/* 0.56999=f(0.57000, v4.57000)*/
-{ 1, 0,123,__LINE__, 0x3fe28f5c, 0x20000000, 0x3fe28f5c, 0x28f5c29b, 0x401251eb, 0x851eb853},			/* 0.57999=f(0.58000, v4.58000)*/
-{ 1, 0,123,__LINE__, 0x3fe2e147, 0xa0000000, 0x3fe2e147, 0xae147aed, 0x40125c28, 0xf5c28f5e},			/* 0.58999=f(0.59000, v4.59000)*/
-{ 1, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0x3fe33333, 0x3333333f, 0x40126666, 0x66666668},			/* 0.60000=f(0.60000, v4.60000)*/
-{ 1, 0,123,__LINE__, 0x3fe3851e, 0xc0000000, 0x3fe3851e, 0xb851eb91, 0x401270a3, 0xd70a3d72},			/* 0.61000=f(0.61000, v4.61000)*/
-{ 1, 0,123,__LINE__, 0x3fe3d70a, 0x40000000, 0x3fe3d70a, 0x3d70a3e3, 0x40127ae1, 0x47ae147c},			/* 0.62000=f(0.62000, v4.62000)*/
-{ 1, 0,123,__LINE__, 0x3fe428f5, 0xc0000000, 0x3fe428f5, 0xc28f5c35, 0x4012851e, 0xb851eb87},			/* 0.63000=f(0.63000, v4.63000)*/
-{ 1, 0,123,__LINE__, 0x3fe47ae1, 0x40000000, 0x3fe47ae1, 0x47ae1487, 0x40128f5c, 0x28f5c291},			/* 0.63999=f(0.64000, v4.64000)*/
-{ 1, 0,123,__LINE__, 0x3fe4cccc, 0xc0000000, 0x3fe4cccc, 0xccccccd9, 0x40129999, 0x9999999b},			/* 0.64999=f(0.65000, v4.65000)*/
-{ 1, 0,123,__LINE__, 0x3fe51eb8, 0x60000000, 0x3fe51eb8, 0x51eb852b, 0x4012a3d7, 0x0a3d70a5},			/* 0.66000=f(0.66000, v4.66000)*/
-{ 1, 0,123,__LINE__, 0x3fe570a3, 0xe0000000, 0x3fe570a3, 0xd70a3d7d, 0x4012ae14, 0x7ae147b0},			/* 0.67000=f(0.67000, v4.67000)*/
-{ 1, 0,123,__LINE__, 0x3fe5c28f, 0x60000000, 0x3fe5c28f, 0x5c28f5cf, 0x4012b851, 0xeb851eba},			/* 0.68000=f(0.68000, v4.68000)*/
-{ 1, 0,123,__LINE__, 0x3fe6147a, 0xe0000000, 0x3fe6147a, 0xe147ae21, 0x4012c28f, 0x5c28f5c4},			/* 0.69000=f(0.69000, v4.69000)*/
-{ 1, 0,123,__LINE__, 0x3fe66666, 0x60000000, 0x3fe66666, 0x66666673, 0x4012cccc, 0xccccccce},			/* 0.69999=f(0.70000, v4.70000)*/
-{ 1, 0,123,__LINE__, 0x3fe6b851, 0xe0000000, 0x3fe6b851, 0xeb851ec5, 0x4012d70a, 0x3d70a3d9},			/* 0.70999=f(0.71000, v4.71000)*/
-{ 1, 0,123,__LINE__, 0x3fe70a3d, 0x80000000, 0x3fe70a3d, 0x70a3d717, 0x4012e147, 0xae147ae3},			/* 0.72000=f(0.72000, v4.72000)*/
-{ 1, 0,123,__LINE__, 0x3fe75c29, 0x00000000, 0x3fe75c28, 0xf5c28f69, 0x4012eb85, 0x1eb851ed},			/* 0.73000=f(0.73000, v4.73000)*/
-{ 1, 0,123,__LINE__, 0x3fe7ae14, 0x80000000, 0x3fe7ae14, 0x7ae147bb, 0x4012f5c2, 0x8f5c28f7},			/* 0.74000=f(0.74000, v4.74000)*/
-{ 1, 0,123,__LINE__, 0x3fe80000, 0x00000000, 0x3fe80000, 0x0000000d, 0x40130000, 0x00000002},			/* 0.75000=f(0.75000, v4.75000)*/
-{ 1, 0,123,__LINE__, 0x3fe851eb, 0x80000000, 0x3fe851eb, 0x851eb85f, 0x40130a3d, 0x70a3d70c},			/* 0.75999=f(0.76000, v4.76000)*/
-{ 1, 0,123,__LINE__, 0x3fe8a3d7, 0x00000000, 0x3fe8a3d7, 0x0a3d70b1, 0x4013147a, 0xe147ae16},			/* 0.76999=f(0.77000, v4.77000)*/
-{ 1, 0,123,__LINE__, 0x3fe8f5c2, 0x80000000, 0x3fe8f5c2, 0x8f5c2903, 0x40131eb8, 0x51eb8520},			/* 0.77999=f(0.78000, v4.78000)*/
-{ 1, 0,123,__LINE__, 0x3fe947ae, 0x20000000, 0x3fe947ae, 0x147ae155, 0x401328f5, 0xc28f5c2b},			/* 0.79000=f(0.79000, v4.79000)*/
-{ 1, 0,123,__LINE__, 0x3fe99999, 0xa0000000, 0x3fe99999, 0x999999a7, 0x40133333, 0x33333335},			/* 0.80000=f(0.80000, v4.80000)*/
-{ 1, 0,123,__LINE__, 0x3fe9eb85, 0x20000000, 0x3fe9eb85, 0x1eb851f9, 0x40133d70, 0xa3d70a3f},			/* 0.81000=f(0.81000, v4.81000)*/
-{ 1, 0,123,__LINE__, 0x3fea3d70, 0xa0000000, 0x3fea3d70, 0xa3d70a4b, 0x401347ae, 0x147ae149},			/* 0.81999=f(0.82000, v4.82000)*/
-{ 1, 0,123,__LINE__, 0x3fea8f5c, 0x20000000, 0x3fea8f5c, 0x28f5c29d, 0x401351eb, 0x851eb854},			/* 0.82999=f(0.83000, v4.83000)*/
-{ 1, 0,123,__LINE__, 0x3feae147, 0xa0000000, 0x3feae147, 0xae147aef, 0x40135c28, 0xf5c28f5e},			/* 0.83999=f(0.84000, v4.84000)*/
-{ 1, 0,123,__LINE__, 0x3feb3333, 0x40000000, 0x3feb3333, 0x33333341, 0x40136666, 0x66666668},			/* 0.85000=f(0.85000, v4.85000)*/
-{ 1, 0,123,__LINE__, 0x3feb851e, 0xc0000000, 0x3feb851e, 0xb851eb93, 0x401370a3, 0xd70a3d72},			/* 0.86000=f(0.86000, v4.86000)*/
-{ 1, 0,123,__LINE__, 0x3febd70a, 0x40000000, 0x3febd70a, 0x3d70a3e5, 0x40137ae1, 0x47ae147d},			/* 0.87000=f(0.87000, v4.87000)*/
-{ 1, 0,123,__LINE__, 0x3fec28f5, 0xc0000000, 0x3fec28f5, 0xc28f5c37, 0x4013851e, 0xb851eb87},			/* 0.88000=f(0.88000, v4.88000)*/
-{ 1, 0,123,__LINE__, 0x3fec7ae1, 0x40000000, 0x3fec7ae1, 0x47ae1489, 0x40138f5c, 0x28f5c291},			/* 0.88999=f(0.89000, v4.89000)*/
-{ 1, 0,123,__LINE__, 0x3feccccc, 0xc0000000, 0x3feccccc, 0xccccccdb, 0x40139999, 0x9999999b},			/* 0.89999=f(0.90000, v4.90000)*/
-{ 1, 0,123,__LINE__, 0x3fed1eb8, 0x60000000, 0x3fed1eb8, 0x51eb852d, 0x4013a3d7, 0x0a3d70a6},			/* 0.91000=f(0.91000, v4.91000)*/
-{ 1, 0,123,__LINE__, 0x3fed70a3, 0xe0000000, 0x3fed70a3, 0xd70a3d7f, 0x4013ae14, 0x7ae147b0},			/* 0.92000=f(0.92000, v4.92000)*/
-{ 1, 0,123,__LINE__, 0x3fedc28f, 0x60000000, 0x3fedc28f, 0x5c28f5d1, 0x4013b851, 0xeb851eba},			/* 0.93000=f(0.93000, v4.93000)*/
-{ 1, 0,123,__LINE__, 0x3fee147a, 0xe0000000, 0x3fee147a, 0xe147ae23, 0x4013c28f, 0x5c28f5c4},			/* 0.94000=f(0.94000, v4.94000)*/
-{ 1, 0,123,__LINE__, 0x3fee6666, 0x60000000, 0x3fee6666, 0x66666675, 0x4013cccc, 0xcccccccf},			/* 0.94999=f(0.95000, v4.95000)*/
-{ 1, 0,123,__LINE__, 0x3feeb851, 0xe0000000, 0x3feeb851, 0xeb851ec7, 0x4013d70a, 0x3d70a3d9},			/* 0.95999=f(0.96000, v4.96000)*/
-{ 1, 0,123,__LINE__, 0x3fef0a3d, 0x80000000, 0x3fef0a3d, 0x70a3d719, 0x4013e147, 0xae147ae3},			/* 0.97000=f(0.97000, v4.97000)*/
-{ 1, 0,123,__LINE__, 0x3fef5c29, 0x00000000, 0x3fef5c28, 0xf5c28f6b, 0x4013eb85, 0x1eb851ed},			/* 0.98000=f(0.98000, v4.98000)*/
-{ 1, 0,123,__LINE__, 0x3fefae14, 0x80000000, 0x3fefae14, 0x7ae147bd, 0x4013f5c2, 0x8f5c28f8},			/* 0.99000=f(0.99000, v4.99000)*/
-{ 1, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007, 0x40140000, 0x00000002},			/* 1.00000=f(1.00000, v5.00000)*/
-{ 1, 0,123,__LINE__, 0x3ff028f5, 0xc0000000, 0x3ff028f5, 0xc28f5c30, 0x40140a3d, 0x70a3d70c},			/* 1.01000=f(1.01000, v5.01000)*/
-{ 1, 0,123,__LINE__, 0x3ff051eb, 0x80000000, 0x3ff051eb, 0x851eb859, 0x4014147a, 0xe147ae16},			/* 1.02000=f(1.02000, v5.02000)*/
-{ 1, 0,123,__LINE__, 0x3ff07ae1, 0x40000000, 0x3ff07ae1, 0x47ae1482, 0x40141eb8, 0x51eb8520},			/* 1.03000=f(1.03000, v5.03000)*/
-{ 1, 0,123,__LINE__, 0x3ff0a3d7, 0x00000000, 0x3ff0a3d7, 0x0a3d70ab, 0x401428f5, 0xc28f5c2b},			/* 1.04000=f(1.04000, v5.04000)*/
-{ 1, 0,123,__LINE__, 0x3ff0cccc, 0xc0000000, 0x3ff0cccc, 0xccccccd4, 0x40143333, 0x33333335},			/* 1.05000=f(1.05000, v5.05000)*/
-{ 1, 0,123,__LINE__, 0x3ff0f5c2, 0x80000000, 0x3ff0f5c2, 0x8f5c28fd, 0x40143d70, 0xa3d70a3f},			/* 1.06000=f(1.06000, v5.06000)*/
-{ 1, 0,123,__LINE__, 0x3ff11eb8, 0x60000000, 0x3ff11eb8, 0x51eb8526, 0x401447ae, 0x147ae14a},			/* 1.07000=f(1.07000, v5.07000)*/
-{ 1, 0,123,__LINE__, 0x3ff147ae, 0x20000000, 0x3ff147ae, 0x147ae14f, 0x401451eb, 0x851eb854},			/* 1.08000=f(1.08000, v5.08000)*/
-{ 1, 0,123,__LINE__, 0x3ff170a3, 0xe0000000, 0x3ff170a3, 0xd70a3d78, 0x40145c28, 0xf5c28f5e},			/* 1.09000=f(1.09000, v5.09000)*/
-{ 1, 0,123,__LINE__, 0x3ff19999, 0xa0000000, 0x3ff19999, 0x999999a1, 0x40146666, 0x66666668},			/* 1.10000=f(1.10000, v5.10000)*/
-{ 1, 0,123,__LINE__, 0x3ff1c28f, 0x60000000, 0x3ff1c28f, 0x5c28f5ca, 0x401470a3, 0xd70a3d72},			/* 1.11000=f(1.11000, v5.11000)*/
-{ 1, 0,123,__LINE__, 0x3ff1eb85, 0x20000000, 0x3ff1eb85, 0x1eb851f3, 0x40147ae1, 0x47ae147d},			/* 1.12000=f(1.12000, v5.12000)*/
-{ 1, 0,123,__LINE__, 0x3ff2147a, 0xe0000000, 0x3ff2147a, 0xe147ae1c, 0x4014851e, 0xb851eb87},			/* 1.13000=f(1.13000, v5.13000)*/
-{ 1, 0,123,__LINE__, 0x3ff23d70, 0xa0000000, 0x3ff23d70, 0xa3d70a45, 0x40148f5c, 0x28f5c291},			/* 1.14000=f(1.14000, v5.14000)*/
-{ 1, 0,123,__LINE__, 0x3ff26666, 0x60000000, 0x3ff26666, 0x6666666e, 0x40149999, 0x9999999c},			/* 1.15000=f(1.15000, v5.15000)*/
-{ 1, 0,123,__LINE__, 0x3ff28f5c, 0x20000000, 0x3ff28f5c, 0x28f5c297, 0x4014a3d7, 0x0a3d70a6},			/* 1.16000=f(1.16000, v5.16000)*/
-{ 1, 0,123,__LINE__, 0x3ff2b851, 0xe0000000, 0x3ff2b851, 0xeb851ec0, 0x4014ae14, 0x7ae147b0},			/* 1.17000=f(1.17000, v5.17000)*/
-{ 1, 0,123,__LINE__, 0x3ff2e147, 0xa0000000, 0x3ff2e147, 0xae147ae9, 0x4014b851, 0xeb851eba},			/* 1.18000=f(1.18000, v5.18000)*/
-{ 1, 0,123,__LINE__, 0x3ff30a3d, 0x80000000, 0x3ff30a3d, 0x70a3d712, 0x4014c28f, 0x5c28f5c4},			/* 1.19000=f(1.19000, v5.19000)*/
-{ 0, 0,123,__LINE__, 0xbffb7813, 0x00000000, 0xc01921fb, 0x54442d18, 0xc00243f6, 0xa8885a30},			/* -1.71681=f(-6.28318, v-2.28318)*/
-{ 0, 0,123,__LINE__, 0xbfdc0918, 0x00000000, 0xc012d97c, 0x7f3321d2, 0xbfe6cbe3, 0xf9990e90},			/* -0.43805=f(-4.71238, v-0.71238)*/
-{ 0, 0,123,__LINE__, 0xbfe21fb5, 0xa0000000, 0xc00921fb, 0x54442d18, 0x3feb7812, 0xaeef4ba0},			/* -0.56637=f(-3.14159, v0.85840)*/
-{ 0, 0,123,__LINE__, 0xbff921fb, 0x60000000, 0xbff921fb, 0x54442d18, 0x40036f02, 0x55dde974},			/* -1.57079=f(-1.57079, v2.42920)*/
-{ 0, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000, 0x40100000, 0x00000000},			/* 0.00000=f(0.00000, v4.00000)*/
-{ 1, 0,123,__LINE__, 0x3ff921fb, 0x60000000, 0x3ff921fb, 0x54442d18, 0x4016487e, 0xd5110b46},			/* 1.57079=f(1.57079, v5.57079)*/
-{14, 0,123,__LINE__, 0x400921fb, 0x60000000, 0x400921fb, 0x54442d18, 0x401c90fd, 0xaa22168c},			/* 3.14159=f(3.14159, v7.14159)*/
-{11, 0,123,__LINE__, 0x4012d97c, 0x80000000, 0x4012d97c, 0x7f3321d2, 0x40216cbe, 0x3f9990e9},			/* 4.71238=f(4.71238, v8.71238)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03e0000, 0x00000000, 0xc03a0000, 0x00000000},			/* -4.00000=f(-30.0000, v-26.0000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03c4ccc, 0xcccccccd, 0xc0384ccc, 0xcccccccd},			/* -4.00000=f(-28.3000, v-24.3000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc03a9999, 0x9999999a, 0xc0369999, 0x9999999a},			/* -4.00000=f(-26.6000, v-22.6000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc038e666, 0x66666667, 0xc034e666, 0x66666667},			/* -4.00000=f(-24.9000, v-20.9000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0373333, 0x33333334, 0xc0333333, 0x33333334},			/* -4.00000=f(-23.2000, v-19.2000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0358000, 0x00000001, 0xc0318000, 0x00000001},			/* -4.00000=f(-21.5000, v-17.5000)*/
-{ 0, 0,123,__LINE__, 0xc00fffff, 0x80000000, 0xc033cccc, 0xccccccce, 0xc02f9999, 0x9999999c},			/* -3.99999=f(-19.8000, v-15.8000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0321999, 0x9999999b, 0xc02c3333, 0x33333336},			/* -4.00000=f(-18.1000, v-14.1000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0306666, 0x66666668, 0xc028cccc, 0xccccccd0},			/* -4.00000=f(-16.4000, v-12.4000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc02d6666, 0x6666666a, 0xc0256666, 0x6666666a},			/* -4.00000=f(-14.7000, v-10.7000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc02a0000, 0x00000004, 0xc0220000, 0x00000004},			/* -4.00000=f(-13.0000, v-9.00000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x00000000, 0xc0269999, 0x9999999e, 0xc01d3333, 0x3333333c},			/* -4.00000=f(-11.3000, v-7.30000)*/
-{ 0, 0,123,__LINE__, 0xc0100000, 0x20000000, 0xc0233333, 0x33333338, 0xc0166666, 0x66666670},			/* -4.00000=f(-9.60000, v-5.60000)*/
-{ 0, 0,123,__LINE__, 0xbfb99998, 0x00000000, 0xc01f9999, 0x999999a3, 0xc00f3333, 0x33333346},			/* -0.09999=f(-7.90000, v-3.90000)*/
-{ 0, 0,123,__LINE__, 0xbffccccc, 0x80000000, 0xc018cccc, 0xccccccd6, 0xc0019999, 0x999999ac},			/* -1.80000=f(-6.20000, v-2.20000)*/
-{ 0, 0,123,__LINE__, 0x80000000, 0x00000000, 0xc0120000, 0x00000009, 0xbfe00000, 0x00000048},			/* 0.00000=f(-4.50000, v-0.50000)*/
-{ 0, 0,123,__LINE__, 0xbfd99999, 0x00000000, 0xc0066666, 0x66666678, 0x3ff33333, 0x33333310},			/* -0.39999=f(-2.80000, v1.20000)*/
-{ 0, 0,123,__LINE__, 0xbff19999, 0xa0000000, 0xbff19999, 0x999999bd, 0x40073333, 0x33333322},			/* -1.10000=f(-1.10000, v2.90000)*/
-{ 1, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0x3fe33333, 0x333332ec, 0x40126666, 0x6666665e},			/* 0.60000=f(0.60000, v4.60000)*/
-{12, 0,123,__LINE__, 0x40026666, 0x60000000, 0x40026666, 0x66666654, 0x40193333, 0x3333332a},			/* 2.30000=f(2.30000, v6.30000)*/
-{11, 0,123,__LINE__, 0x40100000, 0x00000000, 0x400fffff, 0xffffffee, 0x401fffff, 0xfffffff7},			/* 4.00000=f(4.00000, v8.00000)*/
-{11, 0,123,__LINE__, 0x4016cccc, 0xc0000000, 0x4016cccc, 0xccccccc4, 0x40236666, 0x66666662},			/* 5.70000=f(5.70000, v9.70000)*/
-{11, 0,123,__LINE__, 0x401d9999, 0xa0000000, 0x401d9999, 0x99999991, 0x4026cccc, 0xccccccc8},			/* 7.40000=f(7.40000, v11.4000)*/
-{10, 0,123,__LINE__, 0x40223333, 0x40000000, 0x40223333, 0x3333332f, 0x402a3333, 0x3333332f},			/* 9.10000=f(9.10000, v13.1000)*/
-{10, 0,123,__LINE__, 0x40259999, 0xa0000000, 0x40259999, 0x99999995, 0x402d9999, 0x99999995},			/* 10.8000=f(10.8000, v14.8000)*/
-{10, 0,123,__LINE__, 0x40290000, 0x00000000, 0x4028ffff, 0xfffffffb, 0x40307fff, 0xfffffffe},			/* 12.5000=f(12.5000, v16.5000)*/
-{10, 0,123,__LINE__, 0x402c6666, 0x60000000, 0x402c6666, 0x66666661, 0x40323333, 0x33333330},			/* 14.2000=f(14.2000, v18.2000)*/
-{10, 0,123,__LINE__, 0x402fcccc, 0xc0000000, 0x402fcccc, 0xccccccc7, 0x4033e666, 0x66666664},			/* 15.9000=f(15.9000, v19.9000)*/
-{10, 0,123,__LINE__, 0x40319999, 0xa0000000, 0x40319999, 0x99999997, 0x40359999, 0x99999997},			/* 17.6000=f(17.6000, v21.6000)*/
-{10, 0,123,__LINE__, 0x40334ccc, 0xc0000000, 0x40334ccc, 0xccccccca, 0x40374ccc, 0xccccccca},			/* 19.2999=f(19.3000, v23.3000)*/
-{10, 0,123,__LINE__, 0x40350000, 0x00000000, 0x4034ffff, 0xfffffffd, 0x4038ffff, 0xfffffffd},			/* 21.0000=f(21.0000, v25.0000)*/
-{10, 0,123,__LINE__, 0x4036b333, 0x40000000, 0x4036b333, 0x33333330, 0x403ab333, 0x33333330},			/* 22.7000=f(22.7000, v26.7000)*/
-{10, 0,123,__LINE__, 0x40386666, 0x60000000, 0x40386666, 0x66666663, 0x403c6666, 0x66666663},			/* 24.4000=f(24.4000, v28.4000)*/
-{10, 0,123,__LINE__, 0x403a1999, 0xa0000000, 0x403a1999, 0x99999996, 0x403e1999, 0x99999996},			/* 26.1000=f(26.1000, v30.1000)*/
-{10, 0,123,__LINE__, 0x403bcccc, 0xc0000000, 0x403bcccc, 0xccccccc9, 0x403fcccc, 0xccccccc9},			/* 27.7999=f(27.8000, v31.8000)*/
-{10, 0,123,__LINE__, 0x403d8000, 0x00000000, 0x403d7fff, 0xfffffffc, 0x4040bfff, 0xfffffffe},			/* 29.5000=f(29.5000, v33.5000)*/
-0,};
-test_fmodf(m)   {run_vector_1(m,fmodf_vec,(char *)(fmodf),"fmodf","fff");   }	
diff --git a/newlib/libm/test/gamma_vec.c b/newlib/libm/test/gamma_vec.c
deleted file mode 100644
index 119efe6f6..000000000
--- a/newlib/libm/test/gamma_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type gamma_vec[] = {
-{60, 0,123,__LINE__, 0xbfb5db13, 0x8c7d70c7, 0xbff33333, 0x33333333},			/* -0.08537=f(-1.20000)*/
-{62, 0,123,__LINE__, 0xbfb5197b, 0x6469c221, 0xbff30a3d, 0x70a3d70a},			/* -0.08242=f(-1.19000)*/
-{63, 0,123,__LINE__, 0xbfb44f7b, 0xcf714466, 0xbff2e147, 0xae147ae1},			/* -0.07933=f(-1.18000)*/
-{60, 0,123,__LINE__, 0xbfb37cfb, 0x2ac8e137, 0xbff2b851, 0xeb851eb8},			/* -0.07612=f(-1.17000)*/
-{60, 0,123,__LINE__, 0xbfb2a1df, 0x3f1a2ee7, 0xbff28f5c, 0x28f5c28f},			/* -0.07278=f(-1.16000)*/
-{60, 0,123,__LINE__, 0xbfb1be0d, 0x3ba6e2c7, 0xbff26666, 0x66666666},			/* -0.06930=f(-1.15000)*/
-{62, 0,123,__LINE__, 0xbfb0d169, 0xb1375ba9, 0xbff23d70, 0xa3d70a3d},			/* -0.06569=f(-1.14000)*/
-{62, 0,123,__LINE__, 0xbfafb7b1, 0x19a303f8, 0xbff2147a, 0xe147ae14},			/* -0.06194=f(-1.13000)*/
-{60, 0,123,__LINE__, 0xbfadba7a, 0x246a1ed7, 0xbff1eb85, 0x1eb851eb},			/* -0.05806=f(-1.12000)*/
-{61, 0,123,__LINE__, 0xbfabaaf3, 0xac34421a, 0xbff1c28f, 0x5c28f5c2},			/* -0.05403=f(-1.11000)*/
-{62, 0,123,__LINE__, 0xbfa988e1, 0x705d89dc, 0xbff19999, 0x99999999},			/* -0.04987=f(-1.10000)*/
-{61, 0,123,__LINE__, 0xbfa75405, 0xb99ffc53, 0xbff170a3, 0xd70a3d70},			/* -0.04556=f(-1.09000)*/
-{62, 0,123,__LINE__, 0xbfa50c21, 0x4cf50179, 0xbff147ae, 0x147ae147},			/* -0.04110=f(-1.08000)*/
-{62, 0,123,__LINE__, 0xbfa2b0f3, 0x5dde50c1, 0xbff11eb8, 0x51eb851e},			/* -0.03650=f(-1.07000)*/
-{62, 0,123,__LINE__, 0xbfa04239, 0x800dd5e9, 0xbff0f5c2, 0x8f5c28f5},			/* -0.03175=f(-1.06000)*/
-{61, 0,123,__LINE__, 0xbf9b7f5f, 0x30c6fcdb, 0xbff0cccc, 0xcccccccc},			/* -0.02685=f(-1.05000)*/
-{62, 0,123,__LINE__, 0xbf96521f, 0x9a6e8d78, 0xbff0a3d7, 0x0a3d70a3},			/* -0.02179=f(-1.04000)*/
-{62, 0,123,__LINE__, 0xbf90fc24, 0xebca6fe5, 0xbff07ae1, 0x47ae147a},			/* -0.01658=f(-1.03000)*/
-{62, 0,123,__LINE__, 0xbf86f9b8, 0x26414df9, 0xbff051eb, 0x851eb851},			/* -0.01121=f(-1.02000)*/
-{60, 0,123,__LINE__, 0xbf774eb8, 0x68854617, 0xbff028f5, 0xc28f5c28},			/* -0.00569=f(-1.01000)*/
-{61, 0,123,__LINE__, 0x3ca2788c, 0xfc6fb61b, 0xbfefffff, 0xfffffffe},			/* 1.28168e-16=f(-0.01000)*/
-{61, 0,123,__LINE__, 0x3f77fb35, 0xb942e1d3, 0xbfefae14, 0x7ae147ac},			/* 0.00585=f(-0.99000)*/
-{62, 0,123,__LINE__, 0x3f8852bb, 0x7fbc7e61, 0xbfef5c28, 0xf5c28f5a},			/* 0.01187=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3f928059, 0x0b8e75bb, 0xbfef0a3d, 0x70a3d708},			/* 0.01806=f(-0.97000)*/
-{63, 0,123,__LINE__, 0x3f99046c, 0x1e32cbca, 0xbfeeb851, 0xeb851eb6},			/* 0.02443=f(-0.96000)*/
-{59, 0,123,__LINE__, 0x3f9fb648, 0xaaf9762e, 0xbfee6666, 0x66666664},			/* 0.03096=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3fa34b52, 0xbf317833, 0xbfee147a, 0xe147ae12},			/* 0.03768=f(-0.94000)*/
-{58, 0,123,__LINE__, 0x3fa6d31f, 0x59f2651f, 0xbfedc28f, 0x5c28f5c0},			/* 0.04457=f(-0.93000)*/
-{63, 0,123,__LINE__, 0x3faa72ea, 0xf732ed14, 0xbfed70a3, 0xd70a3d6e},			/* 0.05165=f(-0.92000)*/
-{63, 0,123,__LINE__, 0x3fae2b19, 0x49e1a4ac, 0xbfed1eb8, 0x51eb851c},			/* 0.05892=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3fb0fe08, 0x82e465c4, 0xbfeccccc, 0xccccccca},			/* 0.06637=f(-0.90000)*/
-{63, 0,123,__LINE__, 0x3fb2f31e, 0x00542b2a, 0xbfec7ae1, 0x47ae1478},			/* 0.07402=f(-0.89000)*/
-{62, 0,123,__LINE__, 0x3fb4f503, 0xaa939ced, 0xbfec28f5, 0xc28f5c26},			/* 0.08186=f(-0.88000)*/
-{63, 0,123,__LINE__, 0x3fb703f1, 0xc3de0746, 0xbfebd70a, 0x3d70a3d4},			/* 0.08990=f(-0.87000)*/
-{63, 0,123,__LINE__, 0x3fb92022, 0x56d7dd76, 0xbfeb851e, 0xb851eb82},			/* 0.09814=f(-0.86000)*/
-{62, 0,123,__LINE__, 0x3fbb49d1, 0x4b2fd3e9, 0xbfeb3333, 0x33333330},			/* 0.10659=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x3fbd813c, 0x7b740d65, 0xbfeae147, 0xae147ade},			/* 0.11525=f(-0.84000)*/
-{63, 0,123,__LINE__, 0x3fbfc6a3, 0xcc315c0a, 0xbfea8f5c, 0x28f5c28c},			/* 0.12412=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fc10d24, 0xa23a39c9, 0xbfea3d70, 0xa3d70a3a},			/* 0.13321=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3fc23e38, 0x93e37acd, 0xbfe9eb85, 0x1eb851e8},			/* 0.14252=f(-0.81000)*/
-{62, 0,123,__LINE__, 0x3fc376b1, 0x08e2401e, 0xbfe99999, 0x99999996},			/* 0.15205=f(-0.80000)*/
-{64, 0,123,__LINE__, 0x3fc4b6b2, 0x89b33032, 0xbfe947ae, 0x147ae144},			/* 0.16182=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3fc5fe62, 0xe913a18d, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.17182=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3fc74de9, 0x5491a139, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.18206=f(-0.77000)*/
-{62, 0,123,__LINE__, 0x3fc8a56e, 0x662dfe9a, 0xbfe851eb, 0x851eb84e},			/* 0.19254=f(-0.76000)*/
-{63, 0,123,__LINE__, 0x3fca051c, 0x372609ff, 0xbfe7ffff, 0xfffffffc},			/* 0.20328=f(-0.75000)*/
-{59, 0,123,__LINE__, 0x3fcb6d1e, 0x73fcbc11, 0xbfe7ae14, 0x7ae147aa},			/* 0.21426=f(-0.74000)*/
-{61, 0,123,__LINE__, 0x3fccdda2, 0x71dd3d05, 0xbfe75c28, 0xf5c28f58},			/* 0.22551=f(-0.73000)*/
-{61, 0,123,__LINE__, 0x3fce56d7, 0x4573437c, 0xbfe70a3d, 0x70a3d706},			/* 0.23702=f(-0.72000)*/
-{62, 0,123,__LINE__, 0x3fcfd8ed, 0xdb588b3b, 0xbfe6b851, 0xeb851eb4},			/* 0.24880=f(-0.71000)*/
-{61, 0,123,__LINE__, 0x3fd0b20c, 0x891cde7c, 0xbfe66666, 0x66666662},			/* 0.26086=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x3fd17c46, 0xeb6c4aa1, 0xbfe6147a, 0xe147ae10},			/* 0.27321=f(-0.69000)*/
-{64, 0,123,__LINE__, 0x3fd24b41, 0xa10a79d5, 0xbfe5c28f, 0x5c28f5be},			/* 0.28584=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3fd31f19, 0x5c956644, 0xbfe570a3, 0xd70a3d6c},			/* 0.29877=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3fd3f7ec, 0x082be675, 0xbfe51eb8, 0x51eb851a},			/* 0.31200=f(-0.66000)*/
-{64, 0,123,__LINE__, 0x3fd4d5d8, 0xd810767e, 0xbfe4cccc, 0xccccccc8},			/* 0.32555=f(-0.65000)*/
-{62, 0,123,__LINE__, 0x3fd5b900, 0x5ebb22fa, 0xbfe47ae1, 0x47ae1476},			/* 0.33941=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3fd6a184, 0xa27d2ee8, 0xbfe428f5, 0xc28f5c24},			/* 0.35360=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3fd78f89, 0x34dcecf5, 0xbfe3d70a, 0x3d70a3d2},			/* 0.36813=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3fd88333, 0x4bd4a467, 0xbfe3851e, 0xb851eb80},			/* 0.38300=f(-0.61000)*/
-{63, 0,123,__LINE__, 0x3fd97ca9, 0xdd244e35, 0xbfe33333, 0x3333332e},			/* 0.39823=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fda7c15, 0xbbeb9574, 0xbfe2e147, 0xae147adc},			/* 0.41382=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3fdb81a1, 0xb8c7e94e, 0xbfe28f5c, 0x28f5c28a},			/* 0.42978=f(-0.58000)*/
-{63, 0,123,__LINE__, 0x3fdc8d7a, 0xc4b9b5de, 0xbfe23d70, 0xa3d70a38},			/* 0.44613=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3fdd9fd0, 0x171c276a, 0xbfe1eb85, 0x1eb851e6},			/* 0.46287=f(-0.56000)*/
-{62, 0,123,__LINE__, 0x3fdeb8d3, 0x57045cf2, 0xbfe19999, 0x99999994},			/* 0.48003=f(-0.55000)*/
-{62, 0,123,__LINE__, 0x3fdfd8b8, 0xc867d4de, 0xbfe147ae, 0x147ae142},			/* 0.49760=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3fe07fdb, 0xbebb3326, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.51560=f(-0.53000)*/
-{62, 0,123,__LINE__, 0x3fe11704, 0xc65144be, 0xbfe0a3d7, 0x0a3d709e},			/* 0.53405=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x3fe1b1f6, 0x25f1b031, 0xbfe051eb, 0x851eb84c},			/* 0.55297=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3fe250d0, 0x48e7a1c8, 0xbfdfffff, 0xfffffff4},			/* 0.57236=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3fe2f3b5, 0x7ea204ea, 0xbfdf5c28, 0xf5c28f50},			/* 0.59224=f(-0.49000)*/
-{63, 0,123,__LINE__, 0x3fe39aca, 0x22363405, 0xbfdeb851, 0xeb851eac},			/* 0.61264=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fe44634, 0xc6082a61, 0xbfde147a, 0xe147ae08},			/* 0.63357=f(-0.47000)*/
-{62, 0,123,__LINE__, 0x3fe4f61e, 0x642115ea, 0xbfdd70a3, 0xd70a3d64},			/* 0.65504=f(-0.46000)*/
-{62, 0,123,__LINE__, 0x3fe5aab2, 0x93d2356a, 0xbfdccccc, 0xccccccc0},			/* 0.67708=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fe6641f, 0xc55ac769, 0xbfdc28f5, 0xc28f5c1c},			/* 0.69972=f(-0.44000)*/
-{63, 0,123,__LINE__, 0x3fe72297, 0x84653797, 0xbfdb851e, 0xb851eb78},			/* 0.72297=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3fe7e64e, 0xc252ac01, 0xbfdae147, 0xae147ad4},			/* 0.74686=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3fe8af7e, 0x2975c439, 0xbfda3d70, 0xa3d70a30},			/* 0.77142=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3fe97e62, 0x7a8f4a4c, 0xbfd99999, 0x9999998c},			/* 0.79667=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3fea533c, 0xf61ba0e7, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.82266=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3feb2e53, 0xd34840dc, 0xbfd851eb, 0x851eb844},			/* 0.84940=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3fec0ff2, 0xc6c099db, 0xbfd7ae14, 0x7ae147a0},			/* 0.87694=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3fecf86b, 0x9becf7dd, 0xbfd70a3d, 0x70a3d6fc},			/* 0.90532=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3fede816, 0xe3c18e5a, 0xbfd66666, 0x66666658},			/* 0.93458=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3feedf54, 0xbcddcbc3, 0xbfd5c28f, 0x5c28f5b4},			/* 0.96476=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3fefde8d, 0xb984cf28, 0xbfd51eb8, 0x51eb8510},			/* 0.99591=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3ff07319, 0xf47900b3, 0xbfd47ae1, 0x47ae146c},			/* 1.02810=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3ff0fb62, 0x05634687, 0xbfd3d70a, 0x3d70a3c8},			/* 1.06137=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3ff18863, 0x7a6c41a3, 0xbfd33333, 0x33333324},			/* 1.09579=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3ff21a69, 0x9ad205dd, 0xbfd28f5c, 0x28f5c280},			/* 1.13144=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3ff2b1c7, 0x801202ae, 0xbfd1eb85, 0x1eb851dc},			/* 1.16840=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3ff34ed9, 0x388c298c, 0xbfd147ae, 0x147ae138},			/* 1.20675=f(-0.27000)*/
-{62, 0,123,__LINE__, 0x3ff3f205, 0x20fe467e, 0xbfd0a3d7, 0x0a3d7094},			/* 1.24658=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3ff49bbd, 0x81c16f0c, 0xbfcfffff, 0xffffffe0},			/* 1.28802=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3ff54c82, 0x8064dd5e, 0xbfceb851, 0xeb851e98},			/* 1.33117=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3ff604e4, 0x7b3539a8, 0xbfcd70a3, 0xd70a3d50},			/* 1.37619=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3ff6c586, 0xeaf64d0f, 0xbfcc28f5, 0xc28f5c08},			/* 1.42322=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3ff78f23, 0xf04c91d9, 0xbfcae147, 0xae147ac0},			/* 1.47244=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3ff86290, 0xbf25b63d, 0xbfc99999, 0x99999978},			/* 1.52406=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3ff940c3, 0x2c8551f3, 0xbfc851eb, 0x851eb830},			/* 1.57831=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3ffa2ad8, 0xbd071d1c, 0xbfc70a3d, 0x70a3d6e8},			/* 1.63546=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3ffb221f, 0xb833c76a, 0xbfc5c28f, 0x5c28f5a0},			/* 1.69583=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3ffc2822, 0xfcef3da6, 0xbfc47ae1, 0x47ae1458},			/* 1.75979=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3ffd3eb9, 0xa880560b, 0xbfc33333, 0x33333310},			/* 1.82781=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3ffe681c, 0x2612676e, 0xbfc1eb85, 0x1eb851c8},			/* 1.90041=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3fffa701, 0x0fa523b8, 0xbfc0a3d7, 0x0a3d7080},			/* 1.97827=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x40007f62, 0xd2056346, 0xbfbeb851, 0xeb851e71},			/* 2.06220=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x400139d3, 0xf13aa1ec, 0xbfbc28f5, 0xc28f5be2},			/* 2.15323=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x4002058e, 0x35f3df05, 0xbfb99999, 0x99999953},			/* 2.25271=f(-0.00100)*/
-{63, 0,123,__LINE__, 0x4002e628, 0xe5d72749, 0xbfb70a3d, 0x70a3d6c4},			/* 2.36238=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x4003e080, 0xb2fb2ace, 0xbfb47ae1, 0x47ae1435},			/* 2.48462=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x4004fb66, 0x52da03dc, 0xbfb1eb85, 0x1eb851a6},			/* 2.62275=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x400640d4, 0x945562f7, 0xbfaeb851, 0xeb851e2d},			/* 2.78165=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x4007c043, 0xbd1255c4, 0xbfa99999, 0x9999990e},			/* 2.96887=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x4009939d, 0xb8b8b050, 0xbfa47ae1, 0x47ae13ef},			/* 3.19707=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x400beb75, 0xf03c9410, 0xbf9eb851, 0xeb851da0},			/* 3.48997=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x400f34d8, 0xff85dad0, 0xbf947ae1, 0x47ae1362},			/* 3.90080=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x401265de, 0x0d9b3432, 0xbf847ae1, 0x47ae1249},			/* 4.59948=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x40414837, 0x1bfcbfb9, 0x3cd19000, 0x00000000},			/* 34.5641=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x401265de, 0x0d9b3356, 0x3f847ae1, 0x47ae16ad},			/* 4.59948=f(0.01000)*/
-{64, 0,123,__LINE__, 0x400f34d8, 0xff85d9f2, 0x3f947ae1, 0x47ae1594},			/* 3.90080=f(0.02000)*/
-{64, 0,123,__LINE__, 0x400beb75, 0xf03c937b, 0x3f9eb851, 0xeb851fd2},			/* 3.48997=f(0.03000)*/
-{64, 0,123,__LINE__, 0x4009939d, 0xb8b8afe0, 0x3fa47ae1, 0x47ae1508},			/* 3.19707=f(0.04000)*/
-{64, 0,123,__LINE__, 0x4007c043, 0xbd12556a, 0x3fa99999, 0x99999a27},			/* 2.96887=f(0.05000)*/
-{64, 0,123,__LINE__, 0x400640d4, 0x945562ac, 0x3faeb851, 0xeb851f46},			/* 2.78165=f(0.06000)*/
-{64, 0,123,__LINE__, 0x4004fb66, 0x52da039c, 0x3fb1eb85, 0x1eb85232},			/* 2.62275=f(0.07000)*/
-{64, 0,123,__LINE__, 0x4003e080, 0xb2fb2a95, 0x3fb47ae1, 0x47ae14c1},			/* 2.48462=f(0.08000)*/
-{64, 0,123,__LINE__, 0x4002e628, 0xe5d72716, 0x3fb70a3d, 0x70a3d750},			/* 2.36238=f(0.09000)*/
-{64, 0,123,__LINE__, 0x4002058e, 0x35f3ded8, 0x3fb99999, 0x999999df},			/* 2.25271=f(0.10000)*/
-{64, 0,123,__LINE__, 0x400139d3, 0xf13aa1c3, 0x3fbc28f5, 0xc28f5c6e},			/* 2.15323=f(0.11000)*/
-{64, 0,123,__LINE__, 0x40007f62, 0xd2056320, 0x3fbeb851, 0xeb851efd},			/* 2.06220=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fffa701, 0x0fa52372, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.97827=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3ffe681c, 0x2612672c, 0x3fc1eb85, 0x1eb8520e},			/* 1.90041=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3ffd3eb9, 0xa88055cd, 0x3fc33333, 0x33333356},			/* 1.82781=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3ffc2822, 0xfcef3d6c, 0x3fc47ae1, 0x47ae149e},			/* 1.75979=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3ffb221f, 0xb833c733, 0x3fc5c28f, 0x5c28f5e6},			/* 1.69583=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3ffa2ad8, 0xbd071ce8, 0x3fc70a3d, 0x70a3d72e},			/* 1.63546=f(0.18000)*/
-{63, 0,123,__LINE__, 0x3ff940c3, 0x2c8551c3, 0x3fc851eb, 0x851eb876},			/* 1.57831=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3ff86290, 0xbf25b60f, 0x3fc99999, 0x999999be},			/* 1.52406=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3ff78f23, 0xf04c91ad, 0x3fcae147, 0xae147b06},			/* 1.47244=f(0.21000)*/
-{63, 0,123,__LINE__, 0x3ff6c586, 0xeaf64ce5, 0x3fcc28f5, 0xc28f5c4e},			/* 1.42322=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3ff604e4, 0x7b353980, 0x3fcd70a3, 0xd70a3d96},			/* 1.37619=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3ff54c82, 0x8064dd37, 0x3fceb851, 0xeb851ede},			/* 1.33117=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3ff49bbd, 0x81c16ee7, 0x3fd00000, 0x00000013},			/* 1.28802=f(0.25000)*/
-{62, 0,123,__LINE__, 0x3ff3f205, 0x20fe465a, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.24658=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3ff34ed9, 0x388c2969, 0x3fd147ae, 0x147ae15b},			/* 1.20675=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3ff2b1c7, 0x8012028d, 0x3fd1eb85, 0x1eb851ff},			/* 1.16840=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3ff21a69, 0x9ad205bd, 0x3fd28f5c, 0x28f5c2a3},			/* 1.13144=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3ff18863, 0x7a6c4184, 0x3fd33333, 0x33333347},			/* 1.09579=f(0.30000)*/
-{62, 0,123,__LINE__, 0x3ff0fb62, 0x0563466a, 0x3fd3d70a, 0x3d70a3eb},			/* 1.06137=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3ff07319, 0xf4790096, 0x3fd47ae1, 0x47ae148f},			/* 1.02810=f(0.32000)*/
-{62, 0,123,__LINE__, 0x3fefde8d, 0xb984cef2, 0x3fd51eb8, 0x51eb8533},			/* 0.99591=f(0.33000)*/
-{63, 0,123,__LINE__, 0x3feedf54, 0xbcddcb8d, 0x3fd5c28f, 0x5c28f5d7},			/* 0.96476=f(0.34000)*/
-{62, 0,123,__LINE__, 0x3fede816, 0xe3c18e26, 0x3fd66666, 0x6666667b},			/* 0.93458=f(0.35000)*/
-{62, 0,123,__LINE__, 0x3fecf86b, 0x9becf7aa, 0x3fd70a3d, 0x70a3d71f},			/* 0.90532=f(0.36000)*/
-{62, 0,123,__LINE__, 0x3fec0ff2, 0xc6c099aa, 0x3fd7ae14, 0x7ae147c3},			/* 0.87694=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3feb2e53, 0xd34840ad, 0x3fd851eb, 0x851eb867},			/* 0.84940=f(0.38000)*/
-{63, 0,123,__LINE__, 0x3fea533c, 0xf61ba0b9, 0x3fd8f5c2, 0x8f5c290b},			/* 0.82266=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fe97e62, 0x7a8f4a1f, 0x3fd99999, 0x999999af},			/* 0.79667=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fe8af7e, 0x2975c40d, 0x3fda3d70, 0xa3d70a53},			/* 0.77142=f(0.41000)*/
-{63, 0,123,__LINE__, 0x3fe7e64e, 0xc252abd7, 0x3fdae147, 0xae147af7},			/* 0.74686=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fe72297, 0x8465376d, 0x3fdb851e, 0xb851eb9b},			/* 0.72297=f(0.43000)*/
-{63, 0,123,__LINE__, 0x3fe6641f, 0xc55ac741, 0x3fdc28f5, 0xc28f5c3f},			/* 0.69972=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fe5aab2, 0x93d23542, 0x3fdccccc, 0xcccccce3},			/* 0.67708=f(0.45000)*/
-{61, 0,123,__LINE__, 0x3fe4f61e, 0x642115c4, 0x3fdd70a3, 0xd70a3d87},			/* 0.65504=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fe44634, 0xc6082a3c, 0x3fde147a, 0xe147ae2b},			/* 0.63357=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fe39aca, 0x223633e0, 0x3fdeb851, 0xeb851ecf},			/* 0.61264=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe2f3b5, 0x7ea204c6, 0x3fdf5c28, 0xf5c28f73},			/* 0.59224=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe250d0, 0x48e7a1a7, 0x3fe00000, 0x0000000b},			/* 0.57236=f(0.50000)*/
-{63, 0,123,__LINE__, 0x3fe1b1f6, 0x25f1b011, 0x3fe051eb, 0x851eb85d},			/* 0.55297=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe11704, 0xc651449e, 0x3fe0a3d7, 0x0a3d70af},			/* 0.53405=f(0.52000)*/
-{60, 0,123,__LINE__, 0x3fe07fdb, 0xbebb3308, 0x3fe0f5c2, 0x8f5c2901},			/* 0.51560=f(0.53000)*/
-{63, 0,123,__LINE__, 0x3fdfd8b8, 0xc867d4a0, 0x3fe147ae, 0x147ae153},			/* 0.49760=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fdeb8d3, 0x57045cb6, 0x3fe19999, 0x999999a5},			/* 0.48003=f(0.55000)*/
-{63, 0,123,__LINE__, 0x3fdd9fd0, 0x171c2731, 0x3fe1eb85, 0x1eb851f7},			/* 0.46287=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fdc8d7a, 0xc4b9b5a6, 0x3fe23d70, 0xa3d70a49},			/* 0.44613=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fdb81a1, 0xb8c7e918, 0x3fe28f5c, 0x28f5c29b},			/* 0.42978=f(0.58000)*/
-{63, 0,123,__LINE__, 0x3fda7c15, 0xbbeb953c, 0x3fe2e147, 0xae147aed},			/* 0.41382=f(0.59000)*/
-{63, 0,123,__LINE__, 0x3fd97ca9, 0xdd244e01, 0x3fe33333, 0x3333333f},			/* 0.39823=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3fd88333, 0x4bd4a433, 0x3fe3851e, 0xb851eb91},			/* 0.38300=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fd78f89, 0x34dcecc4, 0x3fe3d70a, 0x3d70a3e3},			/* 0.36813=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fd6a184, 0xa27d2eb7, 0x3fe428f5, 0xc28f5c35},			/* 0.35360=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fd5b900, 0x5ebb22ca, 0x3fe47ae1, 0x47ae1487},			/* 0.33941=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fd4d5d8, 0xd8107650, 0x3fe4cccc, 0xccccccd9},			/* 0.32555=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fd3f7ec, 0x082be648, 0x3fe51eb8, 0x51eb852b},			/* 0.31200=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fd31f19, 0x5c956618, 0x3fe570a3, 0xd70a3d7d},			/* 0.29877=f(0.67000)*/
-{60, 0,123,__LINE__, 0x3fd24b41, 0xa10a79a8, 0x3fe5c28f, 0x5c28f5cf},			/* 0.28584=f(0.68000)*/
-{62, 0,123,__LINE__, 0x3fd17c46, 0xeb6c4a77, 0x3fe6147a, 0xe147ae21},			/* 0.27321=f(0.69000)*/
-{63, 0,123,__LINE__, 0x3fd0b20c, 0x891cde53, 0x3fe66666, 0x66666673},			/* 0.26086=f(0.70000)*/
-{60, 0,123,__LINE__, 0x3fcfd8ed, 0xdb588ae9, 0x3fe6b851, 0xeb851ec5},			/* 0.24880=f(0.71000)*/
-{61, 0,123,__LINE__, 0x3fce56d7, 0x4573432e, 0x3fe70a3d, 0x70a3d717},			/* 0.23702=f(0.72000)*/
-{63, 0,123,__LINE__, 0x3fccdda2, 0x71dd3cb6, 0x3fe75c28, 0xf5c28f69},			/* 0.22551=f(0.73000)*/
-{63, 0,123,__LINE__, 0x3fcb6d1e, 0x73fcbbc5, 0x3fe7ae14, 0x7ae147bb},			/* 0.21426=f(0.74000)*/
-{63, 0,123,__LINE__, 0x3fca051c, 0x372609b5, 0x3fe80000, 0x0000000d},			/* 0.20328=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fc8a56e, 0x662dfe50, 0x3fe851eb, 0x851eb85f},			/* 0.19254=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fc74de9, 0x5491a0f3, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.18206=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fc5fe62, 0xe913a148, 0x3fe8f5c2, 0x8f5c2903},			/* 0.17182=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fc4b6b2, 0x89b32fee, 0x3fe947ae, 0x147ae155},			/* 0.16182=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fc376b1, 0x08e23fdc, 0x3fe99999, 0x999999a7},			/* 0.15205=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fc23e38, 0x93e37a8d, 0x3fe9eb85, 0x1eb851f9},			/* 0.14252=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fc10d24, 0xa23a398b, 0x3fea3d70, 0xa3d70a4b},			/* 0.13321=f(0.82000)*/
-{59, 0,123,__LINE__, 0x3fbfc6a3, 0xcc315b8f, 0x3fea8f5c, 0x28f5c29d},			/* 0.12412=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fbd813c, 0x7b740ced, 0x3feae147, 0xae147aef},			/* 0.11525=f(0.84000)*/
-{63, 0,123,__LINE__, 0x3fbb49d1, 0x4b2fd374, 0x3feb3333, 0x33333341},			/* 0.10659=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fb92022, 0x56d7dd05, 0x3feb851e, 0xb851eb93},			/* 0.09814=f(0.86000)*/
-{60, 0,123,__LINE__, 0x3fb703f1, 0xc3de06d7, 0x3febd70a, 0x3d70a3e5},			/* 0.08990=f(0.87000)*/
-{62, 0,123,__LINE__, 0x3fb4f503, 0xaa939c81, 0x3fec28f5, 0xc28f5c37},			/* 0.08186=f(0.88000)*/
-{62, 0,123,__LINE__, 0x3fb2f31e, 0x00542ac1, 0x3fec7ae1, 0x47ae1489},			/* 0.07402=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fb0fe08, 0x82e4655d, 0x3feccccc, 0xccccccdb},			/* 0.06637=f(0.90000)*/
-{61, 0,123,__LINE__, 0x3fae2b19, 0x49e1a3e3, 0x3fed1eb8, 0x51eb852d},			/* 0.05892=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3faa72ea, 0xf732ec52, 0x3fed70a3, 0xd70a3d7f},			/* 0.05165=f(0.92000)*/
-{62, 0,123,__LINE__, 0x3fa6d31f, 0x59f26461, 0x3fedc28f, 0x5c28f5d1},			/* 0.04457=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fa34b52, 0xbf31777a, 0x3fee147a, 0xe147ae23},			/* 0.03768=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3f9fb648, 0xaaf974c7, 0x3fee6666, 0x66666675},			/* 0.03096=f(0.95000)*/
-{61, 0,123,__LINE__, 0x3f99046c, 0x1e32ca6b, 0x3feeb851, 0xeb851ec7},			/* 0.02443=f(0.96000)*/
-{62, 0,123,__LINE__, 0x3f928059, 0x0b8e7465, 0x3fef0a3d, 0x70a3d719},			/* 0.01806=f(0.97000)*/
-{62, 0,123,__LINE__, 0x3f8852bb, 0x7fbc7bc9, 0x3fef5c28, 0xf5c28f6b},			/* 0.01187=f(0.98000)*/
-{60, 0,123,__LINE__, 0x3f77fb35, 0xb942dcc7, 0x3fefae14, 0x7ae147bd},			/* 0.00585=f(0.99000)*/
-{61, 0,123,__LINE__, 0xbcd0297b, 0x5ce1bf4b, 0x3ff00000, 0x00000007},			/* -8.97173e-16=f(1.00000)*/
-{61, 0,123,__LINE__, 0xbf774eb8, 0x68854a93, 0x3ff028f5, 0xc28f5c30},			/* -0.00569=f(1.01000)*/
-{60, 0,123,__LINE__, 0xbf86f9b8, 0x26415027, 0x3ff051eb, 0x851eb859},			/* -0.01121=f(1.02000)*/
-{63, 0,123,__LINE__, 0xbf90fc24, 0xebca70f4, 0x3ff07ae1, 0x47ae1482},			/* -0.01658=f(1.03000)*/
-{63, 0,123,__LINE__, 0xbf96521f, 0x9a6e8e80, 0x3ff0a3d7, 0x0a3d70ab},			/* -0.02179=f(1.04000)*/
-{62, 0,123,__LINE__, 0xbf9b7f5f, 0x30c6fdd9, 0x3ff0cccc, 0xccccccd4},			/* -0.02685=f(1.05000)*/
-{63, 0,123,__LINE__, 0xbfa04239, 0x800dd664, 0x3ff0f5c2, 0x8f5c28fd},			/* -0.03175=f(1.06000)*/
-{63, 0,123,__LINE__, 0xbfa2b0f3, 0x5dde5138, 0x3ff11eb8, 0x51eb8526},			/* -0.03650=f(1.07000)*/
-{62, 0,123,__LINE__, 0xbfa50c21, 0x4cf501ed, 0x3ff147ae, 0x147ae14f},			/* -0.04110=f(1.08000)*/
-{61, 0,123,__LINE__, 0xbfa75405, 0xb99ffcc3, 0x3ff170a3, 0xd70a3d78},			/* -0.04556=f(1.09000)*/
-{62, 0,123,__LINE__, 0xbfa988e1, 0x705d8a48, 0x3ff19999, 0x999999a1},			/* -0.04987=f(1.10000)*/
-{61, 0,123,__LINE__, 0xbfabaaf3, 0xac344283, 0x3ff1c28f, 0x5c28f5ca},			/* -0.05403=f(1.11000)*/
-{62, 0,123,__LINE__, 0xbfadba7a, 0x246a1f3d, 0x3ff1eb85, 0x1eb851f3},			/* -0.05806=f(1.12000)*/
-{62, 0,123,__LINE__, 0xbfafb7b1, 0x19a30459, 0x3ff2147a, 0xe147ae1c},			/* -0.06194=f(1.13000)*/
-{63, 0,123,__LINE__, 0xbfb0d169, 0xb1375bd8, 0x3ff23d70, 0xa3d70a45},			/* -0.06569=f(1.14000)*/
-{62, 0,123,__LINE__, 0xbfb1be0d, 0x3ba6e2f4, 0x3ff26666, 0x6666666e},			/* -0.06930=f(1.15000)*/
-{61, 0,123,__LINE__, 0xbfb2a1df, 0x3f1a2f12, 0x3ff28f5c, 0x28f5c297},			/* -0.07278=f(1.16000)*/
-{63, 0,123,__LINE__, 0xbfb37cfb, 0x2ac8e162, 0x3ff2b851, 0xeb851ec0},			/* -0.07612=f(1.17000)*/
-{59, 0,123,__LINE__, 0xbfb44f7b, 0xcf71448f, 0x3ff2e147, 0xae147ae9},			/* -0.07933=f(1.18000)*/
-{63, 0,123,__LINE__, 0xbfb5197b, 0x6469c248, 0x3ff30a3d, 0x70a3d712},			/* -0.08242=f(1.19000)*/
-{62, 0,123,__LINE__, 0x40151c74, 0xa1cd4989, 0xc01921fb, 0x54442d18},			/* 5.27778=f(-6.28318)*/
-{59, 0,123,__LINE__, 0x400608aa, 0x8a8d8d2f, 0xc012d97c, 0x7f3321d2},			/* 2.75423=f(-4.71238)*/
-{62, 0,123,__LINE__, 0x3fea7c79, 0x5ea35deb, 0xc00921fb, 0x54442d18},			/* 0.82769=f(-3.14159)*/
-{63, 0,123,__LINE__, 0xbfbdabdf, 0x1a1d104e, 0xbff921fb, 0x54442d18},			/* -0.11590=f(-1.57079)*/
-{64,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{63, 0,123,__LINE__, 0xbfbdabdf, 0x1a1d104e, 0x3ff921fb, 0x54442d18},			/* -0.11590=f(1.57079)*/
-{62, 0,123,__LINE__, 0x3fea7c79, 0x5ea35deb, 0x400921fb, 0x54442d18},			/* 0.82769=f(3.14159)*/
-{59, 0,123,__LINE__, 0x400608aa, 0x8a8d8d2f, 0x4012d97c, 0x7f3321d2},			/* 2.75423=f(4.71238)*/
-{64, 0,123,__LINE__, 0x4051d073, 0x53917230, 0xc03e0000, 0x00000000},			/* 71.2570=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x4050636b, 0x94b9c88a, 0xc03c4ccc, 0xcccccccd},			/* 65.5534=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x404dfa17, 0xe2dfce14, 0xc03a9999, 0x9999999a},			/* 59.9538=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x404b3b87, 0x11a8e7ce, 0xc038e666, 0x66666667},			/* 54.4650=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x40488c21, 0xfae8b0bc, 0xc0373333, 0x33333334},			/* 49.0947=f(-23.2000)*/
-{64, 0,123,__LINE__, 0x4045ed0b, 0xe8171bb8, 0xc0358000, 0x00000001},			/* 43.8519=f(-21.5000)*/
-{64, 0,123,__LINE__, 0x40435f97, 0x6a4f5f75, 0xc033cccc, 0xccccccce},			/* 38.7468=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x4040e552, 0xe4ea7aea, 0xc0321999, 0x9999999b},			/* 33.7915=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x403d0033, 0xeebf8308, 0xc0306666, 0x66666668},			/* 29.0007=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x4038645c, 0xcca2e5ab, 0xc02d6666, 0x6666666a},			/* 24.3920=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x4033fcba, 0x16d50148, 0xc02a0000, 0x00000004},			/* 19.9872=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x402fa0dc, 0x4a4f1284, 0xc0269999, 0x9999999e},			/* 15.8141=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x4027d1be, 0xf9cf2f7e, 0xc0233333, 0x33333338},			/* 11.9096=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x4020a606, 0x2d049d2a, 0xc01f9999, 0x999999a3},			/* 8.32426=f(-7.90000)*/
-{62, 0,123,__LINE__, 0x40148779, 0x555c3f28, 0xc018cccc, 0xccccccd6},			/* 5.13229=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x4003a140, 0xa3a623e4, 0xc0120000, 0x00000009},			/* 2.45373=f(-4.50000)*/
-{62, 0,123,__LINE__, 0x3fe088d4, 0x4b2adb7a, 0xc0066666, 0x66666678},			/* 0.51670=f(-2.80000)*/
-{62, 0,123,__LINE__, 0xbfa988e1, 0x705d8bc4, 0xbff19999, 0x999999bd},			/* -0.04987=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fd97ca9, 0xdd244f00, 0x3fe33333, 0x333332ec},			/* 0.39823=f(0.60000)*/
-{59, 0,123,__LINE__, 0x3fc3bc7a, 0xe53846b0, 0x40026666, 0x66666654},			/* 0.15418=f(2.30000)*/
-{62, 0,123,__LINE__, 0x3ffcab0b, 0xfa2a1fd6, 0x400fffff, 0xffffffee},			/* 1.79175=f(4.00000)*/
-{64, 0,123,__LINE__, 0x401122c8, 0x6abdedf8, 0x4016cccc, 0xccccccc4},			/* 4.28396=f(5.70000)*/
-{63, 0,123,__LINE__, 0x401d5c93, 0x1f42284e, 0x401d9999, 0x99999991},			/* 7.34040=f(7.40000)*/
-{64, 0,123,__LINE__, 0x4025a375, 0x0a6f0ada, 0x40223333, 0x3333332f},			/* 10.8192=f(9.10000)*/
-{64, 0,123,__LINE__, 0x402d459e, 0xd9f0398a, 0x40259999, 0x99999995},			/* 14.6359=f(10.8000)*/
-{64, 0,123,__LINE__, 0x4032bbfe, 0x32d3aa79, 0x4028ffff, 0xfffffffb},			/* 18.7343=f(12.5000)*/
-{64, 0,123,__LINE__, 0x40371300, 0x26276f8a, 0x402c6666, 0x66666661},			/* 23.0742=f(14.2000)*/
-{64, 0,123,__LINE__, 0x403ba020, 0x52c704f0, 0x402fcccc, 0xccccccc7},			/* 27.6254=f(15.9000)*/
-{64, 0,123,__LINE__, 0x40402eaf, 0xef4149f4, 0x40319999, 0x99999997},			/* 32.3647=f(17.6000)*/
-{64, 0,123,__LINE__, 0x4042a2f9, 0x41f4bf5a, 0x40334ccc, 0xccccccca},			/* 37.2732=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40452af5, 0x7aed77ba, 0x4034ffff, 0xfffffffd},			/* 42.3356=f(21.0000)*/
-{64, 0,123,__LINE__, 0x4047c501, 0x9442501c, 0x4036b333, 0x33333330},			/* 47.5391=f(22.7000)*/
-{64, 0,123,__LINE__, 0x404a6fba, 0xe04511ae, 0x40386666, 0x66666663},			/* 52.8728=f(24.4000)*/
-{64, 0,123,__LINE__, 0x404d29f1, 0x436831ba, 0x403a1999, 0x99999996},			/* 58.3276=f(26.1000)*/
-{64, 0,123,__LINE__, 0x404ff29d, 0x1a191b4b, 0x403bcccc, 0xccccccc9},			/* 63.8954=f(27.8000)*/
-{64, 0,123,__LINE__, 0x4051646b, 0xd261edc0, 0x403d7fff, 0xfffffffc},			/* 69.5690=f(29.5000)*/
-0,};
-test_gamma(m)   {run_vector_1(m,gamma_vec,(char *)(gamma),"gamma","dd");   }	
diff --git a/newlib/libm/test/gammaf_vec.c b/newlib/libm/test/gammaf_vec.c
deleted file mode 100644
index 3210f14c4..000000000
--- a/newlib/libm/test/gammaf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type gammaf_vec[] = {
-{ 0, 0,123,__LINE__, 0xbfb5db13, 0xc0000000, 0xbff33333, 0x33333333},			/* -0.08537=f(-1.20000)*/
-{ 0, 0,123,__LINE__, 0xbfb5197b, 0xc0000000, 0xbff30a3d, 0x70a3d70a},			/* -0.08242=f(-1.19000)*/
-{ 0, 0,123,__LINE__, 0xbfb44f7b, 0x80000000, 0xbff2e147, 0xae147ae1},			/* -0.07933=f(-1.18000)*/
-{ 0, 0,123,__LINE__, 0xbfb37cfb, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -0.07612=f(-1.17000)*/
-{ 0, 0,123,__LINE__, 0xbfb2a1df, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* -0.07278=f(-1.16000)*/
-{ 0, 0,123,__LINE__, 0xbfb1be0d, 0x20000000, 0xbff26666, 0x66666666},			/* -0.06930=f(-1.15000)*/
-{ 0, 0,123,__LINE__, 0xbfb0d169, 0xa0000000, 0xbff23d70, 0xa3d70a3d},			/* -0.06569=f(-1.14000)*/
-{ 0, 0,123,__LINE__, 0xbfafb7b1, 0x00000000, 0xbff2147a, 0xe147ae14},			/* -0.06194=f(-1.13000)*/
-{ 0, 0,123,__LINE__, 0xbfadba7a, 0x40000000, 0xbff1eb85, 0x1eb851eb},			/* -0.05806=f(-1.12000)*/
-{ 0, 0,123,__LINE__, 0xbfabaaf3, 0xe0000000, 0xbff1c28f, 0x5c28f5c2},			/* -0.05403=f(-1.11000)*/
-{ 0, 0,123,__LINE__, 0xbfa988e1, 0xc0000000, 0xbff19999, 0x99999999},			/* -0.04987=f(-1.10000)*/
-{ 0, 0,123,__LINE__, 0xbfa75406, 0x40000000, 0xbff170a3, 0xd70a3d70},			/* -0.04556=f(-1.09000)*/
-{ 0, 0,123,__LINE__, 0xbfa50c22, 0x00000000, 0xbff147ae, 0x147ae147},			/* -0.04110=f(-1.08000)*/
-{ 0, 0,123,__LINE__, 0xbfa2b0f4, 0x40000000, 0xbff11eb8, 0x51eb851e},			/* -0.03650=f(-1.07000)*/
-{ 0, 0,123,__LINE__, 0xbfa04238, 0xa0000000, 0xbff0f5c2, 0x8f5c28f5},			/* -0.03175=f(-1.06000)*/
-{ 0, 0,123,__LINE__, 0xbf9b7f5d, 0xa0000000, 0xbff0cccc, 0xcccccccc},			/* -0.02685=f(-1.05000)*/
-{ 0, 0,123,__LINE__, 0xbf96521e, 0x40000000, 0xbff0a3d7, 0x0a3d70a3},			/* -0.02179=f(-1.04000)*/
-{ 0, 0,123,__LINE__, 0xbf90fc23, 0xe0000000, 0xbff07ae1, 0x47ae147a},			/* -0.01658=f(-1.03000)*/
-{ 0, 0,123,__LINE__, 0xbf86f9b6, 0xc0000000, 0xbff051eb, 0x851eb851},			/* -0.01121=f(-1.02000)*/
-{ 0, 0,123,__LINE__, 0xbf774eb7, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -0.00569=f(-1.01000)*/
-{ 1, 0,123,__LINE__, 0x00000000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 0.00000=f(-0.01000)*/
-{ 1, 0,123,__LINE__, 0x3f77fb34, 0x40000000, 0xbfefae14, 0x7ae147ac},			/* 0.00585=f(-0.99000)*/
-{ 1, 0,123,__LINE__, 0x3f8852ba, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 0.01187=f(-0.98000)*/
-{ 1, 0,123,__LINE__, 0x3f928057, 0xe0000000, 0xbfef0a3d, 0x70a3d708},			/* 0.01806=f(-0.97000)*/
-{ 1, 0,123,__LINE__, 0x3f99046d, 0x20000000, 0xbfeeb851, 0xeb851eb6},			/* 0.02443=f(-0.96000)*/
-{ 1, 0,123,__LINE__, 0x3f9fb649, 0x40000000, 0xbfee6666, 0x66666664},			/* 0.03096=f(-0.95000)*/
-{ 1, 0,123,__LINE__, 0x3fa34b52, 0xe0000000, 0xbfee147a, 0xe147ae12},			/* 0.03768=f(-0.94000)*/
-{ 1, 0,123,__LINE__, 0x3fa6d31f, 0x40000000, 0xbfedc28f, 0x5c28f5c0},			/* 0.04457=f(-0.93000)*/
-{ 1, 0,123,__LINE__, 0x3faa72ea, 0xa0000000, 0xbfed70a3, 0xd70a3d6e},			/* 0.05165=f(-0.92000)*/
-{ 1, 0,123,__LINE__, 0x3fae2b18, 0xa0000000, 0xbfed1eb8, 0x51eb851c},			/* 0.05892=f(-0.91000)*/
-{ 1, 0,123,__LINE__, 0x3fb0fe08, 0xe0000000, 0xbfeccccc, 0xccccccca},			/* 0.06637=f(-0.90000)*/
-{ 1, 0,123,__LINE__, 0x3fb2f31e, 0x40000000, 0xbfec7ae1, 0x47ae1478},			/* 0.07402=f(-0.89000)*/
-{ 1, 0,123,__LINE__, 0x3fb4f503, 0xc0000000, 0xbfec28f5, 0xc28f5c26},			/* 0.08186=f(-0.88000)*/
-{ 1, 0,123,__LINE__, 0x3fb703f1, 0xc0000000, 0xbfebd70a, 0x3d70a3d4},			/* 0.08990=f(-0.87000)*/
-{ 1, 0,123,__LINE__, 0x3fb92022, 0x20000000, 0xbfeb851e, 0xb851eb82},			/* 0.09814=f(-0.86000)*/
-{ 1, 0,123,__LINE__, 0x3fbb49d1, 0x00000000, 0xbfeb3333, 0x33333330},			/* 0.10659=f(-0.85000)*/
-{ 1, 0,123,__LINE__, 0x3fbd813c, 0xe0000000, 0xbfeae147, 0xae147ade},			/* 0.11525=f(-0.84000)*/
-{ 1, 0,123,__LINE__, 0x3fbfc6a4, 0x20000000, 0xbfea8f5c, 0x28f5c28c},			/* 0.12412=f(-0.83000)*/
-{ 1, 0,123,__LINE__, 0x3fc10d24, 0xc0000000, 0xbfea3d70, 0xa3d70a3a},			/* 0.13321=f(-0.82000)*/
-{ 1, 0,123,__LINE__, 0x3fc23e38, 0xa0000000, 0xbfe9eb85, 0x1eb851e8},			/* 0.14252=f(-0.81000)*/
-{ 1, 0,123,__LINE__, 0x3fc376b1, 0x00000000, 0xbfe99999, 0x99999996},			/* 0.15205=f(-0.80000)*/
-{ 1, 0,123,__LINE__, 0x3fc4b6b2, 0x60000000, 0xbfe947ae, 0x147ae144},			/* 0.16182=f(-0.79000)*/
-{ 1, 0,123,__LINE__, 0x3fc5fe63, 0x40000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.17182=f(-0.78000)*/
-{ 1, 0,123,__LINE__, 0x3fc74de9, 0xa0000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.18206=f(-0.77000)*/
-{ 1, 0,123,__LINE__, 0x3fc8a56e, 0x80000000, 0xbfe851eb, 0x851eb84e},			/* 0.19254=f(-0.76000)*/
-{ 1, 0,123,__LINE__, 0x3fca051c, 0x40000000, 0xbfe7ffff, 0xfffffffc},			/* 0.20328=f(-0.75000)*/
-{ 1, 0,123,__LINE__, 0x3fcb6d1e, 0x60000000, 0xbfe7ae14, 0x7ae147aa},			/* 0.21426=f(-0.74000)*/
-{ 1, 0,123,__LINE__, 0x3fccdda2, 0x60000000, 0xbfe75c28, 0xf5c28f58},			/* 0.22551=f(-0.73000)*/
-{ 1, 0,123,__LINE__, 0x3fce56d7, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 0.23702=f(-0.72000)*/
-{ 1, 0,123,__LINE__, 0x3fcfd8ee, 0x40000000, 0xbfe6b851, 0xeb851eb4},			/* 0.24880=f(-0.71000)*/
-{ 1, 0,123,__LINE__, 0x3fd0b20c, 0xa0000000, 0xbfe66666, 0x66666662},			/* 0.26086=f(-0.70000)*/
-{ 1, 0,123,__LINE__, 0x3fd17c47, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 0.27321=f(-0.69000)*/
-{ 1, 0,123,__LINE__, 0x3fd24b41, 0xc0000000, 0xbfe5c28f, 0x5c28f5be},			/* 0.28584=f(-0.68000)*/
-{ 1, 0,123,__LINE__, 0x3fd31f19, 0x60000000, 0xbfe570a3, 0xd70a3d6c},			/* 0.29877=f(-0.67000)*/
-{ 1, 0,123,__LINE__, 0x3fd3f7ec, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 0.31200=f(-0.66000)*/
-{ 1, 0,123,__LINE__, 0x3fd4d5d9, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 0.32555=f(-0.65000)*/
-{ 1, 0,123,__LINE__, 0x3fd5b900, 0x80000000, 0xbfe47ae1, 0x47ae1476},			/* 0.33941=f(-0.64000)*/
-{ 1, 0,123,__LINE__, 0x3fd6a184, 0xc0000000, 0xbfe428f5, 0xc28f5c24},			/* 0.35360=f(-0.63000)*/
-{ 1, 0,123,__LINE__, 0x3fd78f89, 0x40000000, 0xbfe3d70a, 0x3d70a3d2},			/* 0.36813=f(-0.62000)*/
-{ 1, 0,123,__LINE__, 0x3fd88333, 0x40000000, 0xbfe3851e, 0xb851eb80},			/* 0.38300=f(-0.61000)*/
-{ 1, 0,123,__LINE__, 0x3fd97ca9, 0xa0000000, 0xbfe33333, 0x3333332e},			/* 0.39823=f(-0.60000)*/
-{ 1, 0,123,__LINE__, 0x3fda7c15, 0xe0000000, 0xbfe2e147, 0xae147adc},			/* 0.41382=f(-0.59000)*/
-{ 1, 0,123,__LINE__, 0x3fdb81a1, 0xe0000000, 0xbfe28f5c, 0x28f5c28a},			/* 0.42978=f(-0.58000)*/
-{ 1, 0,123,__LINE__, 0x3fdc8d7a, 0xa0000000, 0xbfe23d70, 0xa3d70a38},			/* 0.44613=f(-0.57000)*/
-{ 1, 0,123,__LINE__, 0x3fdd9fd0, 0x20000000, 0xbfe1eb85, 0x1eb851e6},			/* 0.46287=f(-0.56000)*/
-{ 1, 0,123,__LINE__, 0x3fdeb8d3, 0x40000000, 0xbfe19999, 0x99999994},			/* 0.48003=f(-0.55000)*/
-{ 1, 0,123,__LINE__, 0x3fdfd8b8, 0xa0000000, 0xbfe147ae, 0x147ae142},			/* 0.49760=f(-0.54000)*/
-{ 1, 0,123,__LINE__, 0x3fe07fdb, 0xe0000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.51560=f(-0.53000)*/
-{ 1, 0,123,__LINE__, 0x3fe11704, 0xe0000000, 0xbfe0a3d7, 0x0a3d709e},			/* 0.53405=f(-0.52000)*/
-{ 1, 0,123,__LINE__, 0x3fe1b1f6, 0x20000000, 0xbfe051eb, 0x851eb84c},			/* 0.55297=f(-0.51000)*/
-{ 1, 0,123,__LINE__, 0x3fe250d0, 0x40000000, 0xbfdfffff, 0xfffffff4},			/* 0.57236=f(-0.50000)*/
-{ 1, 0,123,__LINE__, 0x3fe2f3b5, 0x80000000, 0xbfdf5c28, 0xf5c28f50},			/* 0.59224=f(-0.49000)*/
-{ 1, 0,123,__LINE__, 0x3fe39aca, 0x40000000, 0xbfdeb851, 0xeb851eac},			/* 0.61264=f(-0.48000)*/
-{ 1, 0,123,__LINE__, 0x3fe44634, 0xc0000000, 0xbfde147a, 0xe147ae08},			/* 0.63357=f(-0.47000)*/
-{ 1, 0,123,__LINE__, 0x3fe4f61e, 0x60000000, 0xbfdd70a3, 0xd70a3d64},			/* 0.65504=f(-0.46000)*/
-{ 1, 0,123,__LINE__, 0x3fe5aab2, 0x80000000, 0xbfdccccc, 0xccccccc0},			/* 0.67708=f(-0.45000)*/
-{ 1, 0,123,__LINE__, 0x3fe6641f, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c},			/* 0.69972=f(-0.44000)*/
-{ 1, 0,123,__LINE__, 0x3fe72297, 0x80000000, 0xbfdb851e, 0xb851eb78},			/* 0.72297=f(-0.43000)*/
-{ 1, 0,123,__LINE__, 0x3fe7e64e, 0xe0000000, 0xbfdae147, 0xae147ad4},			/* 0.74686=f(-0.42000)*/
-{ 1, 0,123,__LINE__, 0x3fe8af7e, 0x20000000, 0xbfda3d70, 0xa3d70a30},			/* 0.77142=f(-0.41000)*/
-{ 1, 0,123,__LINE__, 0x3fe97e62, 0x60000000, 0xbfd99999, 0x9999998c},			/* 0.79667=f(-0.40000)*/
-{ 1, 0,123,__LINE__, 0x3fea533d, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.82266=f(-0.39000)*/
-{ 1, 0,123,__LINE__, 0x3feb2e53, 0xc0000000, 0xbfd851eb, 0x851eb844},			/* 0.84940=f(-0.38000)*/
-{ 1, 0,123,__LINE__, 0x3fec0ff2, 0xc0000000, 0xbfd7ae14, 0x7ae147a0},			/* 0.87694=f(-0.37000)*/
-{ 1, 0,123,__LINE__, 0x3fecf86b, 0x60000000, 0xbfd70a3d, 0x70a3d6fc},			/* 0.90532=f(-0.36000)*/
-{ 1, 0,123,__LINE__, 0x3fede816, 0xc0000000, 0xbfd66666, 0x66666658},			/* 0.93458=f(-0.35000)*/
-{ 1, 0,123,__LINE__, 0x3feedf54, 0xa0000000, 0xbfd5c28f, 0x5c28f5b4},			/* 0.96476=f(-0.34000)*/
-{ 1, 0,123,__LINE__, 0x3fefde8d, 0xa0000000, 0xbfd51eb8, 0x51eb8510},			/* 0.99591=f(-0.33000)*/
-{ 1, 0,123,__LINE__, 0x3ff0731a, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 1.02810=f(-0.32000)*/
-{ 1, 0,123,__LINE__, 0x3ff0fb62, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 1.06137=f(-0.31000)*/
-{ 1, 0,123,__LINE__, 0x3ff18863, 0x80000000, 0xbfd33333, 0x33333324},			/* 1.09579=f(-0.30000)*/
-{ 1, 0,123,__LINE__, 0x3ff21a69, 0xa0000000, 0xbfd28f5c, 0x28f5c280},			/* 1.13144=f(-0.29000)*/
-{ 1, 0,123,__LINE__, 0x3ff2b1c7, 0x80000000, 0xbfd1eb85, 0x1eb851dc},			/* 1.16840=f(-0.28000)*/
-{ 1, 0,123,__LINE__, 0x3ff34ed9, 0x40000000, 0xbfd147ae, 0x147ae138},			/* 1.20675=f(-0.27000)*/
-{ 1, 0,123,__LINE__, 0x3ff3f205, 0x20000000, 0xbfd0a3d7, 0x0a3d7094},			/* 1.24658=f(-0.26000)*/
-{ 1, 0,123,__LINE__, 0x3ff49bbd, 0x80000000, 0xbfcfffff, 0xffffffe0},			/* 1.28802=f(-0.25000)*/
-{ 1, 0,123,__LINE__, 0x3ff54c82, 0x80000000, 0xbfceb851, 0xeb851e98},			/* 1.33117=f(-0.24000)*/
-{ 1, 0,123,__LINE__, 0x3ff604e4, 0x60000000, 0xbfcd70a3, 0xd70a3d50},			/* 1.37619=f(-0.23000)*/
-{ 1, 0,123,__LINE__, 0x3ff6c586, 0xe0000000, 0xbfcc28f5, 0xc28f5c08},			/* 1.42322=f(-0.22000)*/
-{ 1, 0,123,__LINE__, 0x3ff78f23, 0xe0000000, 0xbfcae147, 0xae147ac0},			/* 1.47244=f(-0.21000)*/
-{ 1, 0,123,__LINE__, 0x3ff86290, 0xc0000000, 0xbfc99999, 0x99999978},			/* 1.52406=f(-0.20000)*/
-{ 1, 0,123,__LINE__, 0x3ff940c3, 0x20000000, 0xbfc851eb, 0x851eb830},			/* 1.57831=f(-0.19000)*/
-{ 1, 0,123,__LINE__, 0x3ffa2ad8, 0xa0000000, 0xbfc70a3d, 0x70a3d6e8},			/* 1.63546=f(-0.18000)*/
-{ 1, 0,123,__LINE__, 0x3ffb221f, 0xa0000000, 0xbfc5c28f, 0x5c28f5a0},			/* 1.69583=f(-0.17000)*/
-{ 1, 0,123,__LINE__, 0x3ffc2823, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 1.75979=f(-0.16000)*/
-{ 1, 0,123,__LINE__, 0x3ffd3eb9, 0xa0000000, 0xbfc33333, 0x33333310},			/* 1.82781=f(-0.15000)*/
-{ 1, 0,123,__LINE__, 0x3ffe681c, 0x20000000, 0xbfc1eb85, 0x1eb851c8},			/* 1.90041=f(-0.14000)*/
-{ 1, 0,123,__LINE__, 0x3fffa701, 0x40000000, 0xbfc0a3d7, 0x0a3d7080},			/* 1.97827=f(-0.13000)*/
-{13, 0,123,__LINE__, 0x40007f62, 0xe0000000, 0xbfbeb851, 0xeb851e71},			/* 2.06220=f(-0.12000)*/
-{13, 0,123,__LINE__, 0x400139d4, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 2.15323=f(-0.11000)*/
-{13, 0,123,__LINE__, 0x4002058e, 0x40000000, 0xbfb99999, 0x99999953},			/* 2.25271=f(-0.00100)*/
-{13, 0,123,__LINE__, 0x4002e628, 0xe0000000, 0xbfb70a3d, 0x70a3d6c4},			/* 2.36238=f(-0.09000)*/
-{13, 0,123,__LINE__, 0x4003e080, 0xc0000000, 0xbfb47ae1, 0x47ae1435},			/* 2.48462=f(-0.08000)*/
-{14, 0,123,__LINE__, 0x4004fb66, 0x60000000, 0xbfb1eb85, 0x1eb851a6},			/* 2.62275=f(-0.07000)*/
-{15, 0,123,__LINE__, 0x400640d4, 0xa0000000, 0xbfaeb851, 0xeb851e2d},			/* 2.78165=f(-0.06000)*/
-{17, 0,123,__LINE__, 0x4007c043, 0xc0000000, 0xbfa99999, 0x9999990e},			/* 2.96887=f(-0.05000)*/
-{12, 0,123,__LINE__, 0x4009939d, 0xc0000000, 0xbfa47ae1, 0x47ae13ef},			/* 3.19707=f(-0.04000)*/
-{14, 0,123,__LINE__, 0x400beb76, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 3.48997=f(-0.03000)*/
-{13, 0,123,__LINE__, 0x400f34d9, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 3.90080=f(-0.02000)*/
-{11, 0,123,__LINE__, 0x401265de, 0x20000000, 0xbf847ae1, 0x47ae1249},			/* 4.59948=f(-0.00010)*/
-{ 0, 0,123,__LINE__, 0x40414837, 0x20000000, 0x3cd19000, 0x00000000},			/* 34.5641=f(9.74915e-16)*/
-{11, 0,123,__LINE__, 0x401265de, 0x20000000, 0x3f847ae1, 0x47ae16ad},			/* 4.59948=f(0.01000)*/
-{13, 0,123,__LINE__, 0x400f34d9, 0x00000000, 0x3f947ae1, 0x47ae1594},			/* 3.90080=f(0.02000)*/
-{14, 0,123,__LINE__, 0x400beb76, 0x00000000, 0x3f9eb851, 0xeb851fd2},			/* 3.48997=f(0.03000)*/
-{12, 0,123,__LINE__, 0x4009939d, 0xc0000000, 0x3fa47ae1, 0x47ae1508},			/* 3.19707=f(0.04000)*/
-{17, 0,123,__LINE__, 0x4007c043, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 2.96887=f(0.05000)*/
-{15, 0,123,__LINE__, 0x400640d4, 0xa0000000, 0x3faeb851, 0xeb851f46},			/* 2.78165=f(0.06000)*/
-{14, 0,123,__LINE__, 0x4004fb66, 0x60000000, 0x3fb1eb85, 0x1eb85232},			/* 2.62275=f(0.07000)*/
-{13, 0,123,__LINE__, 0x4003e080, 0xc0000000, 0x3fb47ae1, 0x47ae14c1},			/* 2.48462=f(0.08000)*/
-{13, 0,123,__LINE__, 0x4002e628, 0xe0000000, 0x3fb70a3d, 0x70a3d750},			/* 2.36238=f(0.09000)*/
-{13, 0,123,__LINE__, 0x4002058e, 0x40000000, 0x3fb99999, 0x999999df},			/* 2.25271=f(0.10000)*/
-{13, 0,123,__LINE__, 0x400139d4, 0x00000000, 0x3fbc28f5, 0xc28f5c6e},			/* 2.15323=f(0.11000)*/
-{13, 0,123,__LINE__, 0x40007f62, 0xe0000000, 0x3fbeb851, 0xeb851efd},			/* 2.06220=f(0.12000)*/
-{ 1, 0,123,__LINE__, 0x3fffa701, 0x40000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 1.97827=f(0.13000)*/
-{ 1, 0,123,__LINE__, 0x3ffe681c, 0x20000000, 0x3fc1eb85, 0x1eb8520e},			/* 1.90041=f(0.14000)*/
-{ 1, 0,123,__LINE__, 0x3ffd3eb9, 0xa0000000, 0x3fc33333, 0x33333356},			/* 1.82781=f(0.15000)*/
-{ 1, 0,123,__LINE__, 0x3ffc2823, 0x00000000, 0x3fc47ae1, 0x47ae149e},			/* 1.75979=f(0.16000)*/
-{ 1, 0,123,__LINE__, 0x3ffb221f, 0xa0000000, 0x3fc5c28f, 0x5c28f5e6},			/* 1.69583=f(0.17000)*/
-{ 1, 0,123,__LINE__, 0x3ffa2ad8, 0xa0000000, 0x3fc70a3d, 0x70a3d72e},			/* 1.63546=f(0.18000)*/
-{ 1, 0,123,__LINE__, 0x3ff940c3, 0x20000000, 0x3fc851eb, 0x851eb876},			/* 1.57831=f(0.19000)*/
-{ 1, 0,123,__LINE__, 0x3ff86290, 0xc0000000, 0x3fc99999, 0x999999be},			/* 1.52406=f(0.20000)*/
-{ 1, 0,123,__LINE__, 0x3ff78f23, 0xe0000000, 0x3fcae147, 0xae147b06},			/* 1.47244=f(0.21000)*/
-{ 1, 0,123,__LINE__, 0x3ff6c586, 0xe0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 1.42322=f(0.22000)*/
-{ 1, 0,123,__LINE__, 0x3ff604e4, 0x60000000, 0x3fcd70a3, 0xd70a3d96},			/* 1.37619=f(0.23000)*/
-{ 1, 0,123,__LINE__, 0x3ff54c82, 0x80000000, 0x3fceb851, 0xeb851ede},			/* 1.33117=f(0.24000)*/
-{ 1, 0,123,__LINE__, 0x3ff49bbd, 0x80000000, 0x3fd00000, 0x00000013},			/* 1.28802=f(0.25000)*/
-{ 1, 0,123,__LINE__, 0x3ff3f205, 0x20000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 1.24658=f(0.26000)*/
-{ 1, 0,123,__LINE__, 0x3ff34ed9, 0x40000000, 0x3fd147ae, 0x147ae15b},			/* 1.20675=f(0.27000)*/
-{ 1, 0,123,__LINE__, 0x3ff2b1c7, 0x80000000, 0x3fd1eb85, 0x1eb851ff},			/* 1.16840=f(0.28000)*/
-{ 1, 0,123,__LINE__, 0x3ff21a69, 0xa0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 1.13144=f(0.29000)*/
-{ 1, 0,123,__LINE__, 0x3ff18863, 0x80000000, 0x3fd33333, 0x33333347},			/* 1.09579=f(0.30000)*/
-{ 1, 0,123,__LINE__, 0x3ff0fb62, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 1.06137=f(0.31000)*/
-{ 1, 0,123,__LINE__, 0x3ff0731a, 0x00000000, 0x3fd47ae1, 0x47ae148f},			/* 1.02810=f(0.32000)*/
-{ 1, 0,123,__LINE__, 0x3fefde8d, 0xa0000000, 0x3fd51eb8, 0x51eb8533},			/* 0.99591=f(0.33000)*/
-{ 1, 0,123,__LINE__, 0x3feedf54, 0xa0000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.96476=f(0.34000)*/
-{ 1, 0,123,__LINE__, 0x3fede816, 0xc0000000, 0x3fd66666, 0x6666667b},			/* 0.93458=f(0.35000)*/
-{ 1, 0,123,__LINE__, 0x3fecf86b, 0x60000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.90532=f(0.36000)*/
-{ 1, 0,123,__LINE__, 0x3fec0ff2, 0xc0000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.87694=f(0.37000)*/
-{ 1, 0,123,__LINE__, 0x3feb2e53, 0xc0000000, 0x3fd851eb, 0x851eb867},			/* 0.84940=f(0.38000)*/
-{ 1, 0,123,__LINE__, 0x3fea533d, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.82266=f(0.39000)*/
-{ 1, 0,123,__LINE__, 0x3fe97e62, 0x60000000, 0x3fd99999, 0x999999af},			/* 0.79667=f(0.40000)*/
-{ 1, 0,123,__LINE__, 0x3fe8af7e, 0x20000000, 0x3fda3d70, 0xa3d70a53},			/* 0.77142=f(0.41000)*/
-{ 1, 0,123,__LINE__, 0x3fe7e64e, 0xe0000000, 0x3fdae147, 0xae147af7},			/* 0.74686=f(0.42000)*/
-{ 1, 0,123,__LINE__, 0x3fe72297, 0x80000000, 0x3fdb851e, 0xb851eb9b},			/* 0.72297=f(0.43000)*/
-{ 1, 0,123,__LINE__, 0x3fe6641f, 0xc0000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.69972=f(0.44000)*/
-{ 1, 0,123,__LINE__, 0x3fe5aab2, 0x80000000, 0x3fdccccc, 0xcccccce3},			/* 0.67708=f(0.45000)*/
-{ 1, 0,123,__LINE__, 0x3fe4f61e, 0x60000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.65504=f(0.46000)*/
-{ 1, 0,123,__LINE__, 0x3fe44634, 0xc0000000, 0x3fde147a, 0xe147ae2b},			/* 0.63357=f(0.47000)*/
-{ 1, 0,123,__LINE__, 0x3fe39aca, 0x40000000, 0x3fdeb851, 0xeb851ecf},			/* 0.61264=f(0.48000)*/
-{ 1, 0,123,__LINE__, 0x3fe2f3b5, 0x80000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.59224=f(0.49000)*/
-{ 1, 0,123,__LINE__, 0x3fe250d0, 0x40000000, 0x3fe00000, 0x0000000b},			/* 0.57236=f(0.50000)*/
-{ 1, 0,123,__LINE__, 0x3fe1b1f6, 0x20000000, 0x3fe051eb, 0x851eb85d},			/* 0.55297=f(0.51000)*/
-{ 1, 0,123,__LINE__, 0x3fe11704, 0xe0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.53405=f(0.52000)*/
-{ 1, 0,123,__LINE__, 0x3fe07fdb, 0xe0000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.51560=f(0.53000)*/
-{ 1, 0,123,__LINE__, 0x3fdfd8b8, 0xa0000000, 0x3fe147ae, 0x147ae153},			/* 0.49760=f(0.54000)*/
-{ 1, 0,123,__LINE__, 0x3fdeb8d3, 0x40000000, 0x3fe19999, 0x999999a5},			/* 0.48003=f(0.55000)*/
-{ 1, 0,123,__LINE__, 0x3fdd9fd0, 0x20000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.46287=f(0.56000)*/
-{ 1, 0,123,__LINE__, 0x3fdc8d7a, 0xa0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.44613=f(0.57000)*/
-{ 1, 0,123,__LINE__, 0x3fdb81a1, 0xe0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.42978=f(0.58000)*/
-{ 1, 0,123,__LINE__, 0x3fda7c15, 0xe0000000, 0x3fe2e147, 0xae147aed},			/* 0.41382=f(0.59000)*/
-{ 1, 0,123,__LINE__, 0x3fd97ca9, 0xa0000000, 0x3fe33333, 0x3333333f},			/* 0.39823=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0x3fd88333, 0x40000000, 0x3fe3851e, 0xb851eb91},			/* 0.38300=f(0.61000)*/
-{ 1, 0,123,__LINE__, 0x3fd78f89, 0x40000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.36813=f(0.62000)*/
-{ 1, 0,123,__LINE__, 0x3fd6a184, 0xc0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.35360=f(0.63000)*/
-{ 1, 0,123,__LINE__, 0x3fd5b900, 0x80000000, 0x3fe47ae1, 0x47ae1487},			/* 0.33941=f(0.64000)*/
-{ 1, 0,123,__LINE__, 0x3fd4d5d9, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.32555=f(0.65000)*/
-{ 1, 0,123,__LINE__, 0x3fd3f7ec, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.31200=f(0.66000)*/
-{ 1, 0,123,__LINE__, 0x3fd31f19, 0x60000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.29877=f(0.67000)*/
-{ 1, 0,123,__LINE__, 0x3fd24b41, 0xc0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.28584=f(0.68000)*/
-{ 1, 0,123,__LINE__, 0x3fd17c47, 0x00000000, 0x3fe6147a, 0xe147ae21},			/* 0.27321=f(0.69000)*/
-{ 1, 0,123,__LINE__, 0x3fd0b20c, 0xa0000000, 0x3fe66666, 0x66666673},			/* 0.26086=f(0.70000)*/
-{ 1, 0,123,__LINE__, 0x3fcfd8ee, 0x40000000, 0x3fe6b851, 0xeb851ec5},			/* 0.24880=f(0.71000)*/
-{ 1, 0,123,__LINE__, 0x3fce56d7, 0x00000000, 0x3fe70a3d, 0x70a3d717},			/* 0.23702=f(0.72000)*/
-{ 1, 0,123,__LINE__, 0x3fccdda2, 0x60000000, 0x3fe75c28, 0xf5c28f69},			/* 0.22551=f(0.73000)*/
-{ 1, 0,123,__LINE__, 0x3fcb6d1e, 0x60000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.21426=f(0.74000)*/
-{ 1, 0,123,__LINE__, 0x3fca051c, 0x40000000, 0x3fe80000, 0x0000000d},			/* 0.20328=f(0.75000)*/
-{ 1, 0,123,__LINE__, 0x3fc8a56e, 0x80000000, 0x3fe851eb, 0x851eb85f},			/* 0.19254=f(0.76000)*/
-{ 1, 0,123,__LINE__, 0x3fc74de9, 0xa0000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.18206=f(0.77000)*/
-{ 1, 0,123,__LINE__, 0x3fc5fe63, 0x40000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.17182=f(0.78000)*/
-{ 1, 0,123,__LINE__, 0x3fc4b6b2, 0x60000000, 0x3fe947ae, 0x147ae155},			/* 0.16182=f(0.79000)*/
-{ 1, 0,123,__LINE__, 0x3fc376b1, 0x00000000, 0x3fe99999, 0x999999a7},			/* 0.15205=f(0.80000)*/
-{ 1, 0,123,__LINE__, 0x3fc23e38, 0xa0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.14252=f(0.81000)*/
-{ 1, 0,123,__LINE__, 0x3fc10d24, 0xc0000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.13321=f(0.82000)*/
-{ 1, 0,123,__LINE__, 0x3fbfc6a4, 0x20000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.12412=f(0.83000)*/
-{ 1, 0,123,__LINE__, 0x3fbd813c, 0xe0000000, 0x3feae147, 0xae147aef},			/* 0.11525=f(0.84000)*/
-{ 1, 0,123,__LINE__, 0x3fbb49d1, 0x00000000, 0x3feb3333, 0x33333341},			/* 0.10659=f(0.85000)*/
-{ 1, 0,123,__LINE__, 0x3fb92022, 0x20000000, 0x3feb851e, 0xb851eb93},			/* 0.09814=f(0.86000)*/
-{ 1, 0,123,__LINE__, 0x3fb703f1, 0xc0000000, 0x3febd70a, 0x3d70a3e5},			/* 0.08990=f(0.87000)*/
-{ 1, 0,123,__LINE__, 0x3fb4f503, 0xc0000000, 0x3fec28f5, 0xc28f5c37},			/* 0.08186=f(0.88000)*/
-{ 1, 0,123,__LINE__, 0x3fb2f31e, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 0.07402=f(0.89000)*/
-{ 1, 0,123,__LINE__, 0x3fb0fe08, 0xe0000000, 0x3feccccc, 0xccccccdb},			/* 0.06637=f(0.90000)*/
-{ 1, 0,123,__LINE__, 0x3fae2b18, 0xa0000000, 0x3fed1eb8, 0x51eb852d},			/* 0.05892=f(0.91000)*/
-{ 1, 0,123,__LINE__, 0x3faa72ea, 0xa0000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.05165=f(0.92000)*/
-{ 1, 0,123,__LINE__, 0x3fa6d31f, 0x40000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.04457=f(0.93000)*/
-{ 1, 0,123,__LINE__, 0x3fa34b52, 0xe0000000, 0x3fee147a, 0xe147ae23},			/* 0.03768=f(0.94000)*/
-{ 1, 0,123,__LINE__, 0x3f9fb649, 0x40000000, 0x3fee6666, 0x66666675},			/* 0.03096=f(0.95000)*/
-{ 1, 0,123,__LINE__, 0x3f99046d, 0x20000000, 0x3feeb851, 0xeb851ec7},			/* 0.02443=f(0.96000)*/
-{ 1, 0,123,__LINE__, 0x3f928057, 0xe0000000, 0x3fef0a3d, 0x70a3d719},			/* 0.01806=f(0.97000)*/
-{ 1, 0,123,__LINE__, 0x3f8852ba, 0x00000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.01187=f(0.98000)*/
-{ 1, 0,123,__LINE__, 0x3f77fb34, 0x40000000, 0x3fefae14, 0x7ae147bd},			/* 0.00585=f(0.99000)*/
-{ 1, 0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 0.00000=f(1.00000)*/
-{ 0, 0,123,__LINE__, 0xbf774eb7, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* -0.00569=f(1.01000)*/
-{ 0, 0,123,__LINE__, 0xbf86f9b6, 0xc0000000, 0x3ff051eb, 0x851eb859},			/* -0.01121=f(1.02000)*/
-{ 0, 0,123,__LINE__, 0xbf90fc23, 0xe0000000, 0x3ff07ae1, 0x47ae1482},			/* -0.01658=f(1.03000)*/
-{ 0, 0,123,__LINE__, 0xbf96521e, 0x40000000, 0x3ff0a3d7, 0x0a3d70ab},			/* -0.02179=f(1.04000)*/
-{ 0, 0,123,__LINE__, 0xbf9b7f5d, 0xa0000000, 0x3ff0cccc, 0xccccccd4},			/* -0.02685=f(1.05000)*/
-{ 0, 0,123,__LINE__, 0xbfa04238, 0xa0000000, 0x3ff0f5c2, 0x8f5c28fd},			/* -0.03175=f(1.06000)*/
-{ 0, 0,123,__LINE__, 0xbfa2b0f4, 0x40000000, 0x3ff11eb8, 0x51eb8526},			/* -0.03650=f(1.07000)*/
-{ 0, 0,123,__LINE__, 0xbfa50c22, 0x00000000, 0x3ff147ae, 0x147ae14f},			/* -0.04110=f(1.08000)*/
-{ 0, 0,123,__LINE__, 0xbfa75406, 0x40000000, 0x3ff170a3, 0xd70a3d78},			/* -0.04556=f(1.09000)*/
-{ 0, 0,123,__LINE__, 0xbfa988e1, 0xc0000000, 0x3ff19999, 0x999999a1},			/* -0.04987=f(1.10000)*/
-{ 0, 0,123,__LINE__, 0xbfabaaf3, 0xe0000000, 0x3ff1c28f, 0x5c28f5ca},			/* -0.05403=f(1.11000)*/
-{ 0, 0,123,__LINE__, 0xbfadba7a, 0x40000000, 0x3ff1eb85, 0x1eb851f3},			/* -0.05806=f(1.12000)*/
-{ 0, 0,123,__LINE__, 0xbfafb7b1, 0x00000000, 0x3ff2147a, 0xe147ae1c},			/* -0.06194=f(1.13000)*/
-{ 0, 0,123,__LINE__, 0xbfb0d169, 0xa0000000, 0x3ff23d70, 0xa3d70a45},			/* -0.06569=f(1.14000)*/
-{ 0, 0,123,__LINE__, 0xbfb1be0d, 0x20000000, 0x3ff26666, 0x6666666e},			/* -0.06930=f(1.15000)*/
-{ 0, 0,123,__LINE__, 0xbfb2a1df, 0x00000000, 0x3ff28f5c, 0x28f5c297},			/* -0.07278=f(1.16000)*/
-{ 0, 0,123,__LINE__, 0xbfb37cfb, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* -0.07612=f(1.17000)*/
-{ 0, 0,123,__LINE__, 0xbfb44f7b, 0x80000000, 0x3ff2e147, 0xae147ae9},			/* -0.07933=f(1.18000)*/
-{ 0, 0,123,__LINE__, 0xbfb5197b, 0xc0000000, 0x3ff30a3d, 0x70a3d712},			/* -0.08242=f(1.19000)*/
-{12, 0,123,__LINE__, 0x40151c74, 0xc0000000, 0xc01921fb, 0x54442d18},			/* 5.27778=f(-6.28318)*/
-{11, 0,123,__LINE__, 0x400608aa, 0x80000000, 0xc012d97c, 0x7f3321d2},			/* 2.75423=f(-4.71238)*/
-{ 1, 0,123,__LINE__, 0x3fea7c79, 0x80000000, 0xc00921fb, 0x54442d18},			/* 0.82769=f(-3.14159)*/
-{ 0, 0,123,__LINE__, 0xbfbdabdf, 0x00000000, 0xbff921fb, 0x54442d18},			/* -0.11590=f(-1.57079)*/
-{ 0,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0xbfbdabdf, 0x00000000, 0x3ff921fb, 0x54442d18},			/* -0.11590=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3fea7c79, 0x80000000, 0x400921fb, 0x54442d18},			/* 0.82769=f(3.14159)*/
-{11, 0,123,__LINE__, 0x400608aa, 0x80000000, 0x4012d97c, 0x7f3321d2},			/* 2.75423=f(4.71238)*/
-{11, 0,123,__LINE__, 0x4051d073, 0x60000000, 0xc03e0000, 0x00000000},			/* 71.2570=f(-30.0000)*/
-{11, 0,123,__LINE__, 0x4050636b, 0xa0000000, 0xc03c4ccc, 0xcccccccd},			/* 65.5534=f(-28.3000)*/
-{12, 0,123,__LINE__, 0x404dfa17, 0xe0000000, 0xc03a9999, 0x9999999a},			/* 59.9538=f(-26.6000)*/
-{12, 0,123,__LINE__, 0x404b3b87, 0x20000000, 0xc038e666, 0x66666667},			/* 54.4650=f(-24.9000)*/
-{ 9, 0,123,__LINE__, 0x40488c22, 0x20000000, 0xc0373333, 0x33333334},			/* 49.0947=f(-23.2000)*/
-{ 9, 0,123,__LINE__, 0x4045ed0c, 0x00000000, 0xc0358000, 0x00000001},			/* 43.8519=f(-21.5000)*/
-{ 9, 0,123,__LINE__, 0x40435f97, 0x60000000, 0xc033cccc, 0xccccccce},			/* 38.7468=f(-19.8000)*/
-{ 9, 0,123,__LINE__, 0x4040e552, 0xe0000000, 0xc0321999, 0x9999999b},			/* 33.7915=f(-18.1000)*/
-{13, 0,123,__LINE__, 0x403d0033, 0xe0000000, 0xc0306666, 0x66666668},			/* 29.0007=f(-16.4000)*/
-{12, 0,123,__LINE__, 0x4038645c, 0xa0000000, 0xc02d6666, 0x6666666a},			/* 24.3920=f(-14.7000)*/
-{14, 0,123,__LINE__, 0x4033fcba, 0x00000000, 0xc02a0000, 0x00000004},			/* 19.9872=f(-13.0000)*/
-{15, 0,123,__LINE__, 0x402fa0dc, 0x80000000, 0xc0269999, 0x9999999e},			/* 15.8141=f(-11.3000)*/
-{12, 0,123,__LINE__, 0x4027d1bf, 0x20000000, 0xc0233333, 0x33333338},			/* 11.9096=f(-9.60000)*/
-{13, 0,123,__LINE__, 0x4020a606, 0x20000000, 0xc01f9999, 0x999999a3},			/* 8.32426=f(-7.90000)*/
-{12, 0,123,__LINE__, 0x40148779, 0x40000000, 0xc018cccc, 0xccccccd6},			/* 5.13229=f(-6.20000)*/
-{11, 0,123,__LINE__, 0x4003a140, 0xa0000000, 0xc0120000, 0x00000009},			/* 2.45373=f(-4.50000)*/
-{ 1, 0,123,__LINE__, 0x3fe088d4, 0x40000000, 0xc0066666, 0x66666678},			/* 0.51670=f(-2.80000)*/
-{ 0, 0,123,__LINE__, 0xbfa988e1, 0xc0000000, 0xbff19999, 0x999999bd},			/* -0.04987=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0x3fd97ca9, 0xa0000000, 0x3fe33333, 0x333332ec},			/* 0.39823=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0x3fc3bc7a, 0xa0000000, 0x40026666, 0x66666654},			/* 0.15418=f(2.30000)*/
-{ 1, 0,123,__LINE__, 0x3ffcab0c, 0x00000000, 0x400fffff, 0xffffffee},			/* 1.79175=f(4.00000)*/
-{12, 0,123,__LINE__, 0x401122c8, 0x60000000, 0x4016cccc, 0xccccccc4},			/* 4.28396=f(5.70000)*/
-{10, 0,123,__LINE__, 0x401d5c93, 0x20000000, 0x401d9999, 0x99999991},			/* 7.34040=f(7.40000)*/
-{12, 0,123,__LINE__, 0x4025a375, 0x20000000, 0x40223333, 0x3333332f},			/* 10.8192=f(9.10000)*/
-{15, 0,123,__LINE__, 0x402d459e, 0xe0000000, 0x40259999, 0x99999995},			/* 14.6359=f(10.8000)*/
-{14, 0,123,__LINE__, 0x4032bbfe, 0x40000000, 0x4028ffff, 0xfffffffb},			/* 18.7343=f(12.5000)*/
-{14, 0,123,__LINE__, 0x40371300, 0x00000000, 0x402c6666, 0x66666661},			/* 23.0742=f(14.2000)*/
-{12, 0,123,__LINE__, 0x403ba020, 0x40000000, 0x402fcccc, 0xccccccc7},			/* 27.6254=f(15.9000)*/
-{ 9, 0,123,__LINE__, 0x40402eb0, 0x00000000, 0x40319999, 0x99999997},			/* 32.3647=f(17.6000)*/
-{ 9, 0,123,__LINE__, 0x4042a2f9, 0x20000000, 0x40334ccc, 0xccccccca},			/* 37.2732=f(19.3000)*/
-{ 9, 0,123,__LINE__, 0x40452af5, 0x80000000, 0x4034ffff, 0xfffffffd},			/* 42.3356=f(21.0000)*/
-{ 9, 0,123,__LINE__, 0x4047c501, 0xa0000000, 0x4036b333, 0x33333330},			/* 47.5391=f(22.7000)*/
-{12, 0,123,__LINE__, 0x404a6fba, 0xe0000000, 0x40386666, 0x66666663},			/* 52.8728=f(24.4000)*/
-{12, 0,123,__LINE__, 0x404d29f1, 0x40000000, 0x403a1999, 0x99999996},			/* 58.3276=f(26.1000)*/
-{12, 0,123,__LINE__, 0x404ff29d, 0x20000000, 0x403bcccc, 0xccccccc9},			/* 63.8954=f(27.8000)*/
-{11, 0,123,__LINE__, 0x4051646b, 0xe0000000, 0x403d7fff, 0xfffffffc},			/* 69.5690=f(29.5000)*/
-0,};
-test_gammaf(m)   {run_vector_1(m,gammaf_vec,(char *)(gammaf),"gammaf","ff");   }	
diff --git a/newlib/libm/test/hypot_vec.c b/newlib/libm/test/hypot_vec.c
deleted file mode 100644
index ca8e7ff3f..000000000
--- a/newlib/libm/test/hypot_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type hypot_vec[] = {
-{64, 0,123,__LINE__, 0x40085ed7, 0x614b038c, 0xbff33333, 0x33333333, 0x40066666, 0x66666666},			/* 3.04630=f(-1.20000, v2.80000)*/
-{64, 0,123,__LINE__, 0x400869a7, 0xe2fb7e53, 0xbff30a3d, 0x70a3d70a, 0x40067ae1, 0x47ae147b},			/* 3.05159=f(-1.19000, v2.81000)*/
-{64, 0,123,__LINE__, 0x40087495, 0xe9b1d178, 0xbff2e147, 0xae147ae1, 0x40068f5c, 0x28f5c290},			/* 3.05692=f(-1.18000, v2.82000)*/
-{64, 0,123,__LINE__, 0x40087fa1, 0x4deb838f, 0xbff2b851, 0xeb851eb8, 0x4006a3d7, 0x0a3d70a4},			/* 3.06231=f(-1.17000, v2.83000)*/
-{64, 0,123,__LINE__, 0x40088ac9, 0xe80372ac, 0xbff28f5c, 0x28f5c28f, 0x4006b851, 0xeb851eb8},			/* 3.06776=f(-1.16000, v2.84000)*/
-{64, 0,123,__LINE__, 0x4008960f, 0x9033fa69, 0xbff26666, 0x66666666, 0x4006cccc, 0xcccccccd},			/* 3.07327=f(-1.15000, v2.85000)*/
-{64, 0,123,__LINE__, 0x4008a172, 0x1e991408, 0xbff23d70, 0xa3d70a3d, 0x4006e147, 0xae147ae2},			/* 3.07883=f(-1.14000, v2.86000)*/
-{64, 0,123,__LINE__, 0x4008acf1, 0x6b32703b, 0xbff2147a, 0xe147ae14, 0x4006f5c2, 0x8f5c28f6},			/* 3.08444=f(-1.13000, v2.87000)*/
-{64, 0,123,__LINE__, 0x4008b88d, 0x4de58aaa, 0xbff1eb85, 0x1eb851eb, 0x40070a3d, 0x70a3d70a},			/* 3.09011=f(-1.12000, v2.88000)*/
-{64, 0,123,__LINE__, 0x4008c445, 0x9e7fb6ed, 0xbff1c28f, 0x5c28f5c2, 0x40071eb8, 0x51eb851f},			/* 3.09583=f(-1.11000, v2.89000)*/
-{64, 0,123,__LINE__, 0x4008d01a, 0x34b826d7, 0xbff19999, 0x99999999, 0x40073333, 0x33333334},			/* 3.10161=f(-1.10000, v2.90000)*/
-{64, 0,123,__LINE__, 0x4008dc0a, 0xe831ea21, 0xbff170a3, 0xd70a3d70, 0x400747ae, 0x147ae148},			/* 3.10744=f(-1.09000, v2.91000)*/
-{64, 0,123,__LINE__, 0x4008e817, 0x907de70e, 0xbff147ae, 0x147ae147, 0x40075c28, 0xf5c28f5c},			/* 3.11332=f(-1.08000, v2.92000)*/
-{64, 0,123,__LINE__, 0x4008f440, 0x051ccc28, 0xbff11eb8, 0x51eb851e, 0x400770a3, 0xd70a3d71},			/* 3.11926=f(-1.07000, v2.93000)*/
-{64, 0,123,__LINE__, 0x40090084, 0x1d80fadf, 0xbff0f5c2, 0x8f5c28f5, 0x4007851e, 0xb851eb86},			/* 3.12525=f(-1.06000, v2.94000)*/
-{64, 0,123,__LINE__, 0x40090ce3, 0xb1106af5, 0xbff0cccc, 0xcccccccc, 0x40079999, 0x9999999a},			/* 3.13129=f(-1.05000, v2.95000)*/
-{64, 0,123,__LINE__, 0x4009195e, 0x972686b0, 0xbff0a3d7, 0x0a3d70a3, 0x4007ae14, 0x7ae147ae},			/* 3.13738=f(-1.04000, v2.96000)*/
-{64, 0,123,__LINE__, 0x400925f4, 0xa715ffa1, 0xbff07ae1, 0x47ae147a, 0x4007c28f, 0x5c28f5c3},			/* 3.14353=f(-1.03000, v2.97000)*/
-{64, 0,123,__LINE__, 0x400932a5, 0xb82a9c04, 0xbff051eb, 0x851eb851, 0x4007d70a, 0x3d70a3d8},			/* 3.14973=f(-1.02000, v2.98000)*/
-{64, 0,123,__LINE__, 0x40093f71, 0xa1aafcad, 0xbff028f5, 0xc28f5c28, 0x4007eb85, 0x1eb851ec},			/* 3.15597=f(-1.01000, v2.99000)*/
-{64, 0,123,__LINE__, 0x40094c58, 0x3ada5b53, 0xbfefffff, 0xfffffffe, 0x40080000, 0x00000000},			/* 3.16227=f(-0.01000, v3.00000)*/
-{64, 0,123,__LINE__, 0x40095959, 0x5afa4154, 0xbfefae14, 0x7ae147ac, 0x4008147a, 0xe147ae15},			/* 3.16862=f(-0.99000, v3.01000)*/
-{64, 0,123,__LINE__, 0x40096674, 0xd94c36c4, 0xbfef5c28, 0xf5c28f5a, 0x400828f5, 0xc28f5c2a},			/* 3.17502=f(-0.98000, v3.02000)*/
-{64, 0,123,__LINE__, 0x400973aa, 0x8d1369d2, 0xbfef0a3d, 0x70a3d708, 0x40083d70, 0xa3d70a3e},			/* 3.18147=f(-0.97000, v3.03000)*/
-{64, 0,123,__LINE__, 0x400980fa, 0x4d964e77, 0xbfeeb851, 0xeb851eb6, 0x400851eb, 0x851eb852},			/* 3.18797=f(-0.96000, v3.04000)*/
-{64, 0,123,__LINE__, 0x40098e63, 0xf2203661, 0xbfee6666, 0x66666664, 0x40086666, 0x66666667},			/* 3.19452=f(-0.95000, v3.05000)*/
-{64, 0,123,__LINE__, 0x40099be7, 0x5202e117, 0xbfee147a, 0xe147ae12, 0x40087ae1, 0x47ae147c},			/* 3.20112=f(-0.94000, v3.06000)*/
-{64, 0,123,__LINE__, 0x4009a984, 0x4498045c, 0xbfedc28f, 0x5c28f5c0, 0x40088f5c, 0x28f5c290},			/* 3.20777=f(-0.93000, v3.07000)*/
-{64, 0,123,__LINE__, 0x4009b73a, 0xa142ccc2, 0xbfed70a3, 0xd70a3d6e, 0x4008a3d7, 0x0a3d70a4},			/* 3.21446=f(-0.92000, v3.08000)*/
-{64, 0,123,__LINE__, 0x4009c50a, 0x3f71566f, 0xbfed1eb8, 0x51eb851c, 0x4008b851, 0xeb851eb9},			/* 3.22121=f(-0.91000, v3.09000)*/
-{64, 0,123,__LINE__, 0x4009d2f2, 0xf69e1e1a, 0xbfeccccc, 0xccccccca, 0x4008cccc, 0xccccccce},			/* 3.22800=f(-0.90000, v3.10000)*/
-{64, 0,123,__LINE__, 0x4009e0f4, 0x9e516a41, 0xbfec7ae1, 0x47ae1478, 0x4008e147, 0xae147ae2},			/* 3.23484=f(-0.89000, v3.11000)*/
-{64, 0,123,__LINE__, 0x4009ef0f, 0x0e22ac91, 0xbfec28f5, 0xc28f5c26, 0x4008f5c2, 0x8f5c28f6},			/* 3.24172=f(-0.88000, v3.12000)*/
-{64, 0,123,__LINE__, 0x4009fd42, 0x1db9db95, 0xbfebd70a, 0x3d70a3d4, 0x40090a3d, 0x70a3d70b},			/* 3.24866=f(-0.87000, v3.13000)*/
-{64, 0,123,__LINE__, 0x400a0b8d, 0xa4d0c49b, 0xbfeb851e, 0xb851eb82, 0x40091eb8, 0x51eb8520},			/* 3.25564=f(-0.86000, v3.14000)*/
-{64, 0,123,__LINE__, 0x400a19f1, 0x7b3455ef, 0xbfeb3333, 0x33333330, 0x40093333, 0x33333334},			/* 3.26266=f(-0.85000, v3.15000)*/
-{64, 0,123,__LINE__, 0x400a286d, 0x78c5e169, 0xbfeae147, 0xae147ade, 0x400947ae, 0x147ae148},			/* 3.26974=f(-0.84000, v3.16000)*/
-{64, 0,123,__LINE__, 0x400a3701, 0x757c5746, 0xbfea8f5c, 0x28f5c28c, 0x40095c28, 0xf5c28f5d},			/* 3.27685=f(-0.83000, v3.17000)*/
-{64, 0,123,__LINE__, 0x400a45ad, 0x49657972, 0xbfea3d70, 0xa3d70a3a, 0x400970a3, 0xd70a3d72},			/* 3.28402=f(-0.82000, v3.18000)*/
-{64, 0,123,__LINE__, 0x400a5470, 0xcca70743, 0xbfe9eb85, 0x1eb851e8, 0x4009851e, 0xb851eb86},			/* 3.29123=f(-0.81000, v3.19000)*/
-{64, 0,123,__LINE__, 0x400a634b, 0xd77fe1a5, 0xbfe99999, 0x99999996, 0x40099999, 0x9999999a},			/* 3.29848=f(-0.80000, v3.20000)*/
-{64, 0,123,__LINE__, 0x400a723e, 0x424927d7, 0xbfe947ae, 0x147ae144, 0x4009ae14, 0x7ae147af},			/* 3.30578=f(-0.79000, v3.21000)*/
-{64, 0,123,__LINE__, 0x400a8147, 0xe5774cb7, 0xbfe8f5c2, 0x8f5c28f2, 0x4009c28f, 0x5c28f5c4},			/* 3.31312=f(-0.78000, v3.22000)*/
-{64, 0,123,__LINE__, 0x400a9068, 0x999b24b2, 0xbfe8a3d7, 0x0a3d70a0, 0x4009d70a, 0x3d70a3d8},			/* 3.32051=f(-0.77000, v3.23000)*/
-{64, 0,123,__LINE__, 0x400a9fa0, 0x3762ec71, 0xbfe851eb, 0x851eb84e, 0x4009eb85, 0x1eb851ec},			/* 3.32794=f(-0.76000, v3.24000)*/
-{64, 0,123,__LINE__, 0x400aaeee, 0x979b4838, 0xbfe7ffff, 0xfffffffc, 0x400a0000, 0x00000001},			/* 3.33541=f(-0.75000, v3.25000)*/
-{64, 0,123,__LINE__, 0x400abe53, 0x93303c27, 0xbfe7ae14, 0x7ae147aa, 0x400a147a, 0xe147ae16},			/* 3.34293=f(-0.74000, v3.26000)*/
-{64, 0,123,__LINE__, 0x400acdcf, 0x032e1d54, 0xbfe75c28, 0xf5c28f58, 0x400a28f5, 0xc28f5c2a},			/* 3.35049=f(-0.73000, v3.27000)*/
-{64, 0,123,__LINE__, 0x400add60, 0xc0c27bef, 0xbfe70a3d, 0x70a3d706, 0x400a3d70, 0xa3d70a3e},			/* 3.35809=f(-0.72000, v3.28000)*/
-{64, 0,123,__LINE__, 0x400aed08, 0xa53d0654, 0xbfe6b851, 0xeb851eb4, 0x400a51eb, 0x851eb853},			/* 3.36573=f(-0.71000, v3.29000)*/
-{64, 0,123,__LINE__, 0x400afcc6, 0x8a106555, 0xbfe66666, 0x66666662, 0x400a6666, 0x66666668},			/* 3.37342=f(-0.70000, v3.30000)*/
-{64, 0,123,__LINE__, 0x400b0c9a, 0x48d31198, 0xbfe6147a, 0xe147ae10, 0x400a7ae1, 0x47ae147c},			/* 3.38115=f(-0.69000, v3.31000)*/
-{64, 0,123,__LINE__, 0x400b1c83, 0xbb40225c, 0xbfe5c28f, 0x5c28f5be, 0x400a8f5c, 0x28f5c290},			/* 3.38892=f(-0.68000, v3.32000)*/
-{64, 0,123,__LINE__, 0x400b2c82, 0xbb381576, 0xbfe570a3, 0xd70a3d6c, 0x400aa3d7, 0x0a3d70a5},			/* 3.39673=f(-0.67000, v3.33000)*/
-{64, 0,123,__LINE__, 0x400b3c97, 0x22c190c8, 0xbfe51eb8, 0x51eb851a, 0x400ab851, 0xeb851eba},			/* 3.40458=f(-0.66000, v3.34000)*/
-{64, 0,123,__LINE__, 0x400b4cc0, 0xcc0a1d4e, 0xbfe4cccc, 0xccccccc8, 0x400acccc, 0xccccccce},			/* 3.41247=f(-0.65000, v3.35000)*/
-{64, 0,123,__LINE__, 0x400b5cff, 0x9166db9e, 0xbfe47ae1, 0x47ae1476, 0x400ae147, 0xae147ae2},			/* 3.42040=f(-0.64000, v3.36000)*/
-{64, 0,123,__LINE__, 0x400b6d53, 0x4d553242, 0xbfe428f5, 0xc28f5c24, 0x400af5c2, 0x8f5c28f7},			/* 3.42838=f(-0.63000, v3.37000)*/
-{64, 0,123,__LINE__, 0x400b7dbb, 0xda7b75b1, 0xbfe3d70a, 0x3d70a3d2, 0x400b0a3d, 0x70a3d70c},			/* 3.43639=f(-0.62000, v3.38000)*/
-{64, 0,123,__LINE__, 0x400b8e39, 0x13a98a3f, 0xbfe3851e, 0xb851eb80, 0x400b1eb8, 0x51eb8520},			/* 3.44444=f(-0.61000, v3.39000)*/
-{64, 0,123,__LINE__, 0x400b9eca, 0xd3d97ff9, 0xbfe33333, 0x3333332e, 0x400b3333, 0x33333334},			/* 3.45253=f(-0.60000, v3.40000)*/
-{64, 0,123,__LINE__, 0x400baf70, 0xf630288b, 0xbfe2e147, 0xae147adc, 0x400b47ae, 0x147ae149},			/* 3.46066=f(-0.59000, v3.41000)*/
-{64, 0,123,__LINE__, 0x400bc02b, 0x55fda746, 0xbfe28f5c, 0x28f5c28a, 0x400b5c28, 0xf5c28f5e},			/* 3.46883=f(-0.58000, v3.42000)*/
-{64, 0,123,__LINE__, 0x400bd0f9, 0xcebdfb5d, 0xbfe23d70, 0xa3d70a38, 0x400b70a3, 0xd70a3d72},			/* 3.47703=f(-0.57000, v3.43000)*/
-{64, 0,123,__LINE__, 0x400be1dc, 0x3c198482, 0xbfe1eb85, 0x1eb851e6, 0x400b851e, 0xb851eb86},			/* 3.48528=f(-0.56000, v3.44000)*/
-{64, 0,123,__LINE__, 0x400bf2d2, 0x79e581df, 0xbfe19999, 0x99999994, 0x400b9999, 0x9999999b},			/* 3.49356=f(-0.55000, v3.45000)*/
-{64, 0,123,__LINE__, 0x400c03dc, 0x64248b93, 0xbfe147ae, 0x147ae142, 0x400bae14, 0x7ae147b0},			/* 3.50188=f(-0.54000, v3.46000)*/
-{64, 0,123,__LINE__, 0x400c14f9, 0xd70706c5, 0xbfe0f5c2, 0x8f5c28f0, 0x400bc28f, 0x5c28f5c4},			/* 3.51024=f(-0.53000, v3.47000)*/
-{64, 0,123,__LINE__, 0x400c262a, 0xaeeb9476, 0xbfe0a3d7, 0x0a3d709e, 0x400bd70a, 0x3d70a3d8},			/* 3.51863=f(-0.52000, v3.48000)*/
-{64, 0,123,__LINE__, 0x400c376e, 0xc85f7b0b, 0xbfe051eb, 0x851eb84c, 0x400beb85, 0x1eb851ed},			/* 3.52706=f(-0.51000, v3.49000)*/
-{64, 0,123,__LINE__, 0x400c48c6, 0x001f0ac1, 0xbfdfffff, 0xfffffff4, 0x400c0000, 0x00000002},			/* 3.53553=f(-0.50000, v3.50000)*/
-{64, 0,123,__LINE__, 0x400c5a30, 0x3315fd20, 0xbfdf5c28, 0xf5c28f50, 0x400c147a, 0xe147ae16},			/* 3.54403=f(-0.49000, v3.51000)*/
-{64, 0,123,__LINE__, 0x400c6bad, 0x3e5fcf76, 0xbfdeb851, 0xeb851eac, 0x400c28f5, 0xc28f5c2a},			/* 3.55257=f(-0.48000, v3.52000)*/
-{64, 0,123,__LINE__, 0x400c7d3c, 0xff48187d, 0xbfde147a, 0xe147ae08, 0x400c3d70, 0xa3d70a3f},			/* 3.56115=f(-0.47000, v3.53000)*/
-{64, 0,123,__LINE__, 0x400c8edf, 0x534ad949, 0xbfdd70a3, 0xd70a3d64, 0x400c51eb, 0x851eb854},			/* 3.56976=f(-0.46000, v3.54000)*/
-{64, 0,123,__LINE__, 0x400ca094, 0x1814c988, 0xbfdccccc, 0xccccccc0, 0x400c6666, 0x66666668},			/* 3.57840=f(-0.45000, v3.55000)*/
-{64, 0,123,__LINE__, 0x400cb25b, 0x2b839f41, 0xbfdc28f5, 0xc28f5c1c, 0x400c7ae1, 0x47ae147c},			/* 3.58708=f(-0.44000, v3.56000)*/
-{64, 0,123,__LINE__, 0x400cc434, 0x6ba65209, 0xbfdb851e, 0xb851eb78, 0x400c8f5c, 0x28f5c291},			/* 3.59580=f(-0.43000, v3.57000)*/
-{64, 0,123,__LINE__, 0x400cd61f, 0xb6bd59e8, 0xbfdae147, 0xae147ad4, 0x400ca3d7, 0x0a3d70a6},			/* 3.60455=f(-0.42000, v3.58000)*/
-{64, 0,123,__LINE__, 0x400ce81c, 0xeb3ae9ee, 0xbfda3d70, 0xa3d70a30, 0x400cb851, 0xeb851eba},			/* 3.61333=f(-0.41000, v3.59000)*/
-{64, 0,123,__LINE__, 0x400cfa2b, 0xe7c326a1, 0xbfd99999, 0x9999998c, 0x400ccccc, 0xccccccce},			/* 3.62215=f(-0.40000, v3.60000)*/
-{64, 0,123,__LINE__, 0x400d0c4c, 0x8b2c5846, 0xbfd8f5c2, 0x8f5c28e8, 0x400ce147, 0xae147ae3},			/* 3.63100=f(-0.39000, v3.61000)*/
-{64, 0,123,__LINE__, 0x400d1e7e, 0xb47f1931, 0xbfd851eb, 0x851eb844, 0x400cf5c2, 0x8f5c28f8},			/* 3.63989=f(-0.38000, v3.62000)*/
-{64, 0,123,__LINE__, 0x400d30c2, 0x42f68025, 0xbfd7ae14, 0x7ae147a0, 0x400d0a3d, 0x70a3d70c},			/* 3.64880=f(-0.37000, v3.63000)*/
-{64, 0,123,__LINE__, 0x400d4317, 0x160046e2, 0xbfd70a3d, 0x70a3d6fc, 0x400d1eb8, 0x51eb8520},			/* 3.65775=f(-0.36000, v3.64000)*/
-{64, 0,123,__LINE__, 0x400d557d, 0x0d3cecfc, 0xbfd66666, 0x66666658, 0x400d3333, 0x33333335},			/* 3.66674=f(-0.35000, v3.65000)*/
-{64, 0,123,__LINE__, 0x400d67f4, 0x087fd6f4, 0xbfd5c28f, 0x5c28f5b4, 0x400d47ae, 0x147ae14a},			/* 3.67575=f(-0.34000, v3.66000)*/
-{64, 0,123,__LINE__, 0x400d7a7b, 0xe7cf69d6, 0xbfd51eb8, 0x51eb8510, 0x400d5c28, 0xf5c28f5e},			/* 3.68480=f(-0.33000, v3.67000)*/
-{64, 0,123,__LINE__, 0x400d8d14, 0x8b652355, 0xbfd47ae1, 0x47ae146c, 0x400d70a3, 0xd70a3d72},			/* 3.69388=f(-0.32000, v3.68000)*/
-{64, 0,123,__LINE__, 0x400d9fbd, 0xd3adae7e, 0xbfd3d70a, 0x3d70a3c8, 0x400d851e, 0xb851eb87},			/* 3.70299=f(-0.31000, v3.69000)*/
-{64, 0,123,__LINE__, 0x400db277, 0xa148f514, 0xbfd33333, 0x33333324, 0x400d9999, 0x9999999c},			/* 3.71214=f(-0.30000, v3.70000)*/
-{64, 0,123,__LINE__, 0x400dc541, 0xd50a2db9, 0xbfd28f5c, 0x28f5c280, 0x400dae14, 0x7ae147b0},			/* 3.72131=f(-0.29000, v3.71000)*/
-{64, 0,123,__LINE__, 0x400dd81c, 0x4ff7e6fe, 0xbfd1eb85, 0x1eb851dc, 0x400dc28f, 0x5c28f5c4},			/* 3.73052=f(-0.28000, v3.72000)*/
-{64, 0,123,__LINE__, 0x400deb06, 0xf34c0f39, 0xbfd147ae, 0x147ae138, 0x400dd70a, 0x3d70a3d9},			/* 3.73975=f(-0.27000, v3.73000)*/
-{64, 0,123,__LINE__, 0x400dfe01, 0xa073f97f, 0xbfd0a3d7, 0x0a3d7094, 0x400deb85, 0x1eb851ee},			/* 3.74902=f(-0.26000, v3.74000)*/
-{64, 0,123,__LINE__, 0x400e110c, 0x39105fb0, 0xbfcfffff, 0xffffffe0, 0x400e0000, 0x00000002},			/* 3.75832=f(-0.25000, v3.75000)*/
-{64, 0,123,__LINE__, 0x400e2426, 0x9ef5619f, 0xbfceb851, 0xeb851e98, 0x400e147a, 0xe147ae16},			/* 3.76765=f(-0.24000, v3.76000)*/
-{64, 0,123,__LINE__, 0x400e3750, 0xb42a8182, 0xbfcd70a3, 0xd70a3d50, 0x400e28f5, 0xc28f5c2b},			/* 3.77700=f(-0.23000, v3.77000)*/
-{64, 0,123,__LINE__, 0x400e4a8a, 0x5aea9daf, 0xbfcc28f5, 0xc28f5c08, 0x400e3d70, 0xa3d70a40},			/* 3.78639=f(-0.22000, v3.78000)*/
-{64, 0,123,__LINE__, 0x400e5dd3, 0x75a3e7c5, 0xbfcae147, 0xae147ac0, 0x400e51eb, 0x851eb854},			/* 3.79581=f(-0.21000, v3.79000)*/
-{64, 0,123,__LINE__, 0x400e712b, 0xe6f7d93a, 0xbfc99999, 0x99999978, 0x400e6666, 0x66666668},			/* 3.80526=f(-0.20000, v3.80000)*/
-{64, 0,123,__LINE__, 0x400e8493, 0x91bb2588, 0xbfc851eb, 0x851eb830, 0x400e7ae1, 0x47ae147d},			/* 3.81473=f(-0.19000, v3.81000)*/
-{64, 0,123,__LINE__, 0x400e980a, 0x58f5a9e3, 0xbfc70a3d, 0x70a3d6e8, 0x400e8f5c, 0x28f5c292},			/* 3.82423=f(-0.18000, v3.82000)*/
-{64, 0,123,__LINE__, 0x400eab90, 0x1fe25aa5, 0xbfc5c28f, 0x5c28f5a0, 0x400ea3d7, 0x0a3d70a6},			/* 3.83377=f(-0.17000, v3.83000)*/
-{64, 0,123,__LINE__, 0x400ebf24, 0xc9ef2e7b, 0xbfc47ae1, 0x47ae1458, 0x400eb851, 0xeb851eba},			/* 3.84333=f(-0.16000, v3.84000)*/
-{64, 0,123,__LINE__, 0x400ed2c8, 0x3abd075c, 0xbfc33333, 0x33333310, 0x400ecccc, 0xcccccccf},			/* 3.85292=f(-0.15000, v3.85000)*/
-{64, 0,123,__LINE__, 0x400ee67a, 0x561f9960, 0xbfc1eb85, 0x1eb851c8, 0x400ee147, 0xae147ae4},			/* 3.86253=f(-0.14000, v3.86000)*/
-{64, 0,123,__LINE__, 0x400efa3b, 0x001d4f91, 0xbfc0a3d7, 0x0a3d7080, 0x400ef5c2, 0x8f5c28f8},			/* 3.87218=f(-0.13000, v3.87000)*/
-{64, 0,123,__LINE__, 0x400f0e0a, 0x1cef2eb9, 0xbfbeb851, 0xeb851e71, 0x400f0a3d, 0x70a3d70c},			/* 3.88185=f(-0.12000, v3.88000)*/
-{64, 0,123,__LINE__, 0x400f21e7, 0x9100b63e, 0xbfbc28f5, 0xc28f5be2, 0x400f1eb8, 0x51eb8521},			/* 3.89155=f(-0.11000, v3.89000)*/
-{64, 0,123,__LINE__, 0x400f35d3, 0x40efbf31, 0xbfb99999, 0x99999953, 0x400f3333, 0x33333335},			/* 3.90128=f(-0.00100, v3.90000)*/
-{64, 0,123,__LINE__, 0x400f49cd, 0x118c5972, 0xbfb70a3d, 0x70a3d6c4, 0x400f47ae, 0x147ae14a},			/* 3.91103=f(-0.09000, v3.91000)*/
-{64, 0,123,__LINE__, 0x400f5dd4, 0xe7d8a737, 0xbfb47ae1, 0x47ae1435, 0x400f5c28, 0xf5c28f5e},			/* 3.92081=f(-0.08000, v3.92000)*/
-{64, 0,123,__LINE__, 0x400f71ea, 0xa908b6ca, 0xbfb1eb85, 0x1eb851a6, 0x400f70a3, 0xd70a3d73},			/* 3.93062=f(-0.07000, v3.93000)*/
-{64, 0,123,__LINE__, 0x400f860e, 0x3a825aaf, 0xbfaeb851, 0xeb851e2d, 0x400f851e, 0xb851eb87},			/* 3.94045=f(-0.06000, v3.94000)*/
-{64, 0,123,__LINE__, 0x400f9a3f, 0x81dd003b, 0xbfa99999, 0x9999990e, 0x400f9999, 0x9999999c},			/* 3.95031=f(-0.05000, v3.95000)*/
-{64, 0,123,__LINE__, 0x400fae7e, 0x64e184a0, 0xbfa47ae1, 0x47ae13ef, 0x400fae14, 0x7ae147b0},			/* 3.96020=f(-0.04000, v3.96000)*/
-{64, 0,123,__LINE__, 0x400fc2ca, 0xc98a0883, 0xbf9eb851, 0xeb851da0, 0x400fc28f, 0x5c28f5c5},			/* 3.97011=f(-0.03000, v3.97000)*/
-{64, 0,123,__LINE__, 0x400fd724, 0x9601c231, 0xbf947ae1, 0x47ae1362, 0x400fd70a, 0x3d70a3d9},			/* 3.98005=f(-0.02000, v3.98000)*/
-{64, 0,123,__LINE__, 0x400feb8b, 0xb0a4ce71, 0xbf847ae1, 0x47ae1249, 0x400feb85, 0x1eb851ee},			/* 3.99001=f(-0.00010, v3.99000)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000001, 0x3cd19000, 0x00000000, 0x40100000, 0x00000001},			/* 4.00000=f(9.74915e-16, v4.00000)*/
-{64, 0,123,__LINE__, 0x40100a40, 0xb56856f6, 0x3f847ae1, 0x47ae16ad, 0x40100a3d, 0x70a3d70b},			/* 4.01001=f(0.01000, v4.01000)*/
-{64, 0,123,__LINE__, 0x40101487, 0xec024042, 0x3f947ae1, 0x47ae1594, 0x4010147a, 0xe147ae16},			/* 4.02005=f(0.02000, v4.02000)*/
-{64, 0,123,__LINE__, 0x40101ed5, 0x975c9ea9, 0x3f9eb851, 0xeb851fd2, 0x40101eb8, 0x51eb8520},			/* 4.03011=f(0.03000, v4.03000)*/
-{64, 0,123,__LINE__, 0x40102929, 0xab1e48f0, 0x3fa47ae1, 0x47ae1508, 0x401028f5, 0xc28f5c2a},			/* 4.04019=f(0.04000, v4.04000)*/
-{64, 0,123,__LINE__, 0x40103384, 0x1b05eeb4, 0x3fa99999, 0x99999a27, 0x40103333, 0x33333334},			/* 4.05030=f(0.05000, v4.05000)*/
-{64, 0,123,__LINE__, 0x40103de4, 0xdae9fcca, 0x3faeb851, 0xeb851f46, 0x40103d70, 0xa3d70a3f},			/* 4.06044=f(0.06000, v4.06000)*/
-{64, 0,123,__LINE__, 0x4010484b, 0xdeb8810f, 0x3fb1eb85, 0x1eb85232, 0x401047ae, 0x147ae149},			/* 4.07060=f(0.07000, v4.07000)*/
-{64, 0,123,__LINE__, 0x401052b9, 0x1a770dd9, 0x3fb47ae1, 0x47ae14c1, 0x401051eb, 0x851eb853},			/* 4.08078=f(0.08000, v4.08000)*/
-{64, 0,123,__LINE__, 0x40105d2c, 0x82429ce1, 0x3fb70a3d, 0x70a3d750, 0x40105c28, 0xf5c28f5d},			/* 4.09099=f(0.09000, v4.09000)*/
-{64, 0,123,__LINE__, 0x401067a6, 0x0a4f71c2, 0x3fb99999, 0x999999df, 0x40106666, 0x66666667},			/* 4.10121=f(0.10000, v4.10000)*/
-{64, 0,123,__LINE__, 0x40107225, 0xa6e8fc24, 0x3fbc28f5, 0xc28f5c6e, 0x401070a3, 0xd70a3d72},			/* 4.11147=f(0.11000, v4.11000)*/
-{64, 0,123,__LINE__, 0x40107cab, 0x4c71b962, 0x3fbeb851, 0xeb851efd, 0x40107ae1, 0x47ae147c},			/* 4.12174=f(0.12000, v4.12000)*/
-{64, 0,123,__LINE__, 0x40108736, 0xef6315f9, 0x3fc0a3d7, 0x0a3d70c6, 0x4010851e, 0xb851eb86},			/* 4.13204=f(0.13000, v4.13000)*/
-{64, 0,123,__LINE__, 0x401091c8, 0x844d4e79, 0x3fc1eb85, 0x1eb8520e, 0x40108f5c, 0x28f5c290},			/* 4.14236=f(0.14000, v4.14000)*/
-{64, 0,123,__LINE__, 0x40109c5f, 0xffd75037, 0x3fc33333, 0x33333356, 0x40109999, 0x9999999b},			/* 4.15271=f(0.15000, v4.15000)*/
-{64, 0,123,__LINE__, 0x4010a6fd, 0x56be99ab, 0x3fc47ae1, 0x47ae149e, 0x4010a3d7, 0x0a3d70a5},			/* 4.16307=f(0.16000, v4.16000)*/
-{64, 0,123,__LINE__, 0x4010b1a0, 0x7dd71a7e, 0x3fc5c28f, 0x5c28f5e6, 0x4010ae14, 0x7ae147af},			/* 4.17346=f(0.17000, v4.17000)*/
-{64, 0,123,__LINE__, 0x4010bc49, 0x6a0b1356, 0x3fc70a3d, 0x70a3d72e, 0x4010b851, 0xeb851eb9},			/* 4.18387=f(0.18000, v4.18000)*/
-{64, 0,123,__LINE__, 0x4010c6f8, 0x105af555, 0x3fc851eb, 0x851eb876, 0x4010c28f, 0x5c28f5c4},			/* 4.19430=f(0.19000, v4.19000)*/
-{64, 0,123,__LINE__, 0x4010d1ac, 0x65dd4163, 0x3fc99999, 0x999999be, 0x4010cccc, 0xccccccce},			/* 4.20475=f(0.20000, v4.20000)*/
-{64, 0,123,__LINE__, 0x4010dc66, 0x5fbe673c, 0x3fcae147, 0xae147b06, 0x4010d70a, 0x3d70a3d8},			/* 4.21523=f(0.21000, v4.21000)*/
-{64, 0,123,__LINE__, 0x4010e725, 0xf340a43c, 0x3fcc28f5, 0xc28f5c4e, 0x4010e147, 0xae147ae2},			/* 4.22573=f(0.22000, v4.22000)*/
-{64, 0,123,__LINE__, 0x4010f1eb, 0x15bbe205, 0x3fcd70a3, 0xd70a3d96, 0x4010eb85, 0x1eb851ed},			/* 4.23624=f(0.23000, v4.23000)*/
-{64, 0,123,__LINE__, 0x4010fcb5, 0xbc9d94e5, 0x3fceb851, 0xeb851ede, 0x4010f5c2, 0x8f5c28f7},			/* 4.24678=f(0.24000, v4.24000)*/
-{64, 0,123,__LINE__, 0x40110785, 0xdd689a2a, 0x3fd00000, 0x00000013, 0x40110000, 0x00000001},			/* 4.25734=f(0.25000, v4.25000)*/
-{64, 0,123,__LINE__, 0x4011125b, 0x6db5162a, 0x3fd0a3d7, 0x0a3d70b7, 0x40110a3d, 0x70a3d70b},			/* 4.26792=f(0.26000, v4.26000)*/
-{64, 0,123,__LINE__, 0x40111d36, 0x63305245, 0x3fd147ae, 0x147ae15b, 0x4011147a, 0xe147ae16},			/* 4.27852=f(0.27000, v4.27000)*/
-{64, 0,123,__LINE__, 0x40112816, 0xb39c9aae, 0x3fd1eb85, 0x1eb851ff, 0x40111eb8, 0x51eb8520},			/* 4.28914=f(0.28000, v4.28000)*/
-{64, 0,123,__LINE__, 0x401132fc, 0x54d11c28, 0x3fd28f5c, 0x28f5c2a3, 0x401128f5, 0xc28f5c2a},			/* 4.29979=f(0.29000, v4.29000)*/
-{64, 0,123,__LINE__, 0x40113de7, 0x3cb9c193, 0x3fd33333, 0x33333347, 0x40113333, 0x33333334},			/* 4.31045=f(0.30000, v4.30000)*/
-{64, 0,123,__LINE__, 0x401148d7, 0x61571175, 0x3fd3d70a, 0x3d70a3eb, 0x40113d70, 0xa3d70a3f},			/* 4.32113=f(0.31000, v4.31000)*/
-{64, 0,123,__LINE__, 0x401153cc, 0xb8be0b5a, 0x3fd47ae1, 0x47ae148f, 0x401147ae, 0x147ae149},			/* 4.33183=f(0.32000, v4.32000)*/
-{64, 0,123,__LINE__, 0x40115ec7, 0x3918052f, 0x3fd51eb8, 0x51eb8533, 0x401151eb, 0x851eb853},			/* 4.34255=f(0.33000, v4.33000)*/
-{64, 0,123,__LINE__, 0x401169c6, 0xd8a28886, 0x3fd5c28f, 0x5c28f5d7, 0x40115c28, 0xf5c28f5d},			/* 4.35329=f(0.34000, v4.34000)*/
-{64, 0,123,__LINE__, 0x401174cb, 0x8daf2fce, 0x3fd66666, 0x6666667b, 0x40116666, 0x66666668},			/* 4.36405=f(0.35000, v4.35000)*/
-{64, 0,123,__LINE__, 0x40117fd5, 0x4ea3837a, 0x3fd70a3d, 0x70a3d71f, 0x401170a3, 0xd70a3d72},			/* 4.37483=f(0.36000, v4.36000)*/
-{64, 0,123,__LINE__, 0x40118ae4, 0x11f8d72d, 0x3fd7ae14, 0x7ae147c3, 0x40117ae1, 0x47ae147c},			/* 4.38563=f(0.37000, v4.37000)*/
-{64, 0,123,__LINE__, 0x401195f7, 0xce3c26d8, 0x3fd851eb, 0x851eb867, 0x4011851e, 0xb851eb86},			/* 4.39645=f(0.38000, v4.38000)*/
-{64, 0,123,__LINE__, 0x4011a110, 0x7a0df3cb, 0x3fd8f5c2, 0x8f5c290b, 0x40118f5c, 0x28f5c291},			/* 4.40728=f(0.39000, v4.39000)*/
-{64, 0,123,__LINE__, 0x4011ac2e, 0x0c2221d4, 0x3fd99999, 0x999999af, 0x40119999, 0x9999999b},			/* 4.41814=f(0.40000, v4.40000)*/
-{64, 0,123,__LINE__, 0x4011b750, 0x7b3fd45e, 0x3fda3d70, 0xa3d70a53, 0x4011a3d7, 0x0a3d70a5},			/* 4.42901=f(0.41000, v4.41000)*/
-{64, 0,123,__LINE__, 0x4011c277, 0xbe414b82, 0x3fdae147, 0xae147af7, 0x4011ae14, 0x7ae147af},			/* 4.43991=f(0.42000, v4.42000)*/
-{64, 0,123,__LINE__, 0x4011cda3, 0xcc13c135, 0x3fdb851e, 0xb851eb9b, 0x4011b851, 0xeb851eba},			/* 4.45082=f(0.43000, v4.43000)*/
-{64, 0,123,__LINE__, 0x4011d8d4, 0x9bb74665, 0x3fdc28f5, 0xc28f5c3f, 0x4011c28f, 0x5c28f5c4},			/* 4.46174=f(0.44000, v4.44000)*/
-{64, 0,123,__LINE__, 0x4011e40a, 0x243ea034, 0x3fdccccc, 0xcccccce3, 0x4011cccc, 0xccccccce},			/* 4.47269=f(0.45000, v4.45000)*/
-{64, 0,123,__LINE__, 0x4011ef44, 0x5ccf2533, 0x3fdd70a3, 0xd70a3d87, 0x4011d70a, 0x3d70a3d8},			/* 4.48365=f(0.46000, v4.46000)*/
-{64, 0,123,__LINE__, 0x4011fa83, 0x3ca09aab, 0x3fde147a, 0xe147ae2b, 0x4011e147, 0xae147ae3},			/* 4.49464=f(0.47000, v4.47000)*/
-{64, 0,123,__LINE__, 0x401205c6, 0xbafd11f0, 0x3fdeb851, 0xeb851ecf, 0x4011eb85, 0x1eb851ed},			/* 4.50564=f(0.48000, v4.48000)*/
-{64, 0,123,__LINE__, 0x4012110e, 0xcf40c5d8, 0x3fdf5c28, 0xf5c28f73, 0x4011f5c2, 0x8f5c28f7},			/* 4.51665=f(0.49000, v4.49000)*/
-{64, 0,123,__LINE__, 0x40121c5b, 0x70d9f825, 0x3fe00000, 0x0000000b, 0x40120000, 0x00000001},			/* 4.52769=f(0.50000, v4.50000)*/
-{64, 0,123,__LINE__, 0x401227ac, 0x9748cf1f, 0x3fe051eb, 0x851eb85d, 0x40120a3d, 0x70a3d70c},			/* 4.53874=f(0.51000, v4.51000)*/
-{64, 0,123,__LINE__, 0x40123302, 0x3a1f3332, 0x3fe0a3d7, 0x0a3d70af, 0x4012147a, 0xe147ae16},			/* 4.54981=f(0.52000, v4.52000)*/
-{64, 0,123,__LINE__, 0x40123e5c, 0x5100aca5, 0x3fe0f5c2, 0x8f5c2901, 0x40121eb8, 0x51eb8520},			/* 4.56089=f(0.53000, v4.53000)*/
-{64, 0,123,__LINE__, 0x401249ba, 0xd3a24176, 0x3fe147ae, 0x147ae153, 0x401228f5, 0xc28f5c2a},			/* 4.57200=f(0.54000, v4.54000)*/
-{64, 0,123,__LINE__, 0x4012551d, 0xb9ca533b, 0x3fe19999, 0x999999a5, 0x40123333, 0x33333335},			/* 4.58312=f(0.55000, v4.55000)*/
-{64, 0,123,__LINE__, 0x40126084, 0xfb507d2b, 0x3fe1eb85, 0x1eb851f7, 0x40123d70, 0xa3d70a3f},			/* 4.59425=f(0.56000, v4.56000)*/
-{64, 0,123,__LINE__, 0x40126bf0, 0x901d723f, 0x3fe23d70, 0xa3d70a49, 0x401247ae, 0x147ae149},			/* 4.60541=f(0.57000, v4.57000)*/
-{64, 0,123,__LINE__, 0x40127760, 0x702adb74, 0x3fe28f5c, 0x28f5c29b, 0x401251eb, 0x851eb853},			/* 4.61657=f(0.58000, v4.58000)*/
-{64, 0,123,__LINE__, 0x401282d4, 0x93833623, 0x3fe2e147, 0xae147aed, 0x40125c28, 0xf5c28f5e},			/* 4.62776=f(0.59000, v4.59000)*/
-{64, 0,123,__LINE__, 0x40128e4c, 0xf241b283, 0x3fe33333, 0x3333333f, 0x40126666, 0x66666668},			/* 4.63896=f(0.60000, v4.60000)*/
-{64, 0,123,__LINE__, 0x401299c9, 0x8492123e, 0x3fe3851e, 0xb851eb91, 0x401270a3, 0xd70a3d72},			/* 4.65018=f(0.61000, v4.61000)*/
-{64, 0,123,__LINE__, 0x4012a54a, 0x42b0873f, 0x3fe3d70a, 0x3d70a3e3, 0x40127ae1, 0x47ae147c},			/* 4.66141=f(0.62000, v4.62000)*/
-{64, 0,123,__LINE__, 0x4012b0cf, 0x24e9927f, 0x3fe428f5, 0xc28f5c35, 0x4012851e, 0xb851eb87},			/* 4.67266=f(0.63000, v4.63000)*/
-{64, 0,123,__LINE__, 0x4012bc58, 0x2399e319, 0x3fe47ae1, 0x47ae1487, 0x40128f5c, 0x28f5c291},			/* 4.68393=f(0.64000, v4.64000)*/
-{64, 0,123,__LINE__, 0x4012c7e5, 0x372e356d, 0x3fe4cccc, 0xccccccd9, 0x40129999, 0x9999999b},			/* 4.69521=f(0.65000, v4.65000)*/
-{64, 0,123,__LINE__, 0x4012d376, 0x58233271, 0x3fe51eb8, 0x51eb852b, 0x4012a3d7, 0x0a3d70a5},			/* 4.70650=f(0.66000, v4.66000)*/
-{64, 0,123,__LINE__, 0x4012df0b, 0x7f054f26, 0x3fe570a3, 0xd70a3d7d, 0x4012ae14, 0x7ae147b0},			/* 4.71781=f(0.67000, v4.67000)*/
-{64, 0,123,__LINE__, 0x4012eaa4, 0xa470ac2e, 0x3fe5c28f, 0x5c28f5cf, 0x4012b851, 0xeb851eba},			/* 4.72914=f(0.68000, v4.68000)*/
-{64, 0,123,__LINE__, 0x4012f641, 0xc110f597, 0x3fe6147a, 0xe147ae21, 0x4012c28f, 0x5c28f5c4},			/* 4.74048=f(0.69000, v4.69000)*/
-{64, 0,123,__LINE__, 0x401301e2, 0xcda142c4, 0x3fe66666, 0x66666673, 0x4012cccc, 0xccccccce},			/* 4.75184=f(0.70000, v4.70000)*/
-{64, 0,123,__LINE__, 0x40130d87, 0xc2ebf680, 0x3fe6b851, 0xeb851ec5, 0x4012d70a, 0x3d70a3d9},			/* 4.76321=f(0.71000, v4.71000)*/
-{64, 0,123,__LINE__, 0x40131930, 0x99ca9f40, 0x3fe70a3d, 0x70a3d717, 0x4012e147, 0xae147ae3},			/* 4.77459=f(0.72000, v4.72000)*/
-{64, 0,123,__LINE__, 0x401324dd, 0x4b25d789, 0x3fe75c28, 0xf5c28f69, 0x4012eb85, 0x1eb851ed},			/* 4.78600=f(0.73000, v4.73000)*/
-{64, 0,123,__LINE__, 0x4013308d, 0xcff52686, 0x3fe7ae14, 0x7ae147bb, 0x4012f5c2, 0x8f5c28f7},			/* 4.79741=f(0.74000, v4.74000)*/
-{64, 0,123,__LINE__, 0x40133c42, 0x213ee0cb, 0x3fe80000, 0x0000000d, 0x40130000, 0x00000002},			/* 4.80884=f(0.75000, v4.75000)*/
-{64, 0,123,__LINE__, 0x401347fa, 0x3818093b, 0x3fe851eb, 0x851eb85f, 0x40130a3d, 0x70a3d70c},			/* 4.82029=f(0.76000, v4.76000)*/
-{64, 0,123,__LINE__, 0x401353b6, 0x0da4321e, 0x3fe8a3d7, 0x0a3d70b1, 0x4013147a, 0xe147ae16},			/* 4.83174=f(0.77000, v4.77000)*/
-{64, 0,123,__LINE__, 0x40135f75, 0x9b155e78, 0x3fe8f5c2, 0x8f5c2903, 0x40131eb8, 0x51eb8520},			/* 4.84322=f(0.78000, v4.78000)*/
-{64, 0,123,__LINE__, 0x40136b38, 0xd9abe366, 0x3fe947ae, 0x147ae155, 0x401328f5, 0xc28f5c2b},			/* 4.85470=f(0.79000, v4.79000)*/
-{64, 0,123,__LINE__, 0x401376ff, 0xc2b649ca, 0x3fe99999, 0x999999a7, 0x40133333, 0x33333335},			/* 4.86621=f(0.80000, v4.80000)*/
-{64, 0,123,__LINE__, 0x401382ca, 0x4f91301a, 0x3fe9eb85, 0x1eb851f9, 0x40133d70, 0xa3d70a3f},			/* 4.87772=f(0.81000, v4.81000)*/
-{64, 0,123,__LINE__, 0x40138e98, 0x79a72c60, 0x3fea3d70, 0xa3d70a4b, 0x401347ae, 0x147ae149},			/* 4.88925=f(0.82000, v4.82000)*/
-{64, 0,123,__LINE__, 0x40139a6a, 0x3a70ae62, 0x3fea8f5c, 0x28f5c29d, 0x401351eb, 0x851eb854},			/* 4.90079=f(0.83000, v4.83000)*/
-{64, 0,123,__LINE__, 0x4013a63f, 0x8b73e1fe, 0x3feae147, 0xae147aef, 0x40135c28, 0xf5c28f5e},			/* 4.91235=f(0.84000, v4.84000)*/
-{64, 0,123,__LINE__, 0x4013b218, 0x664491bb, 0x3feb3333, 0x33333341, 0x40136666, 0x66666668},			/* 4.92392=f(0.85000, v4.85000)*/
-{64, 0,123,__LINE__, 0x4013bdf4, 0xc4840985, 0x3feb851e, 0xb851eb93, 0x401370a3, 0xd70a3d72},			/* 4.93550=f(0.86000, v4.86000)*/
-{64, 0,123,__LINE__, 0x4013c9d4, 0x9fe0f996, 0x3febd70a, 0x3d70a3e5, 0x40137ae1, 0x47ae147d},			/* 4.94710=f(0.87000, v4.87000)*/
-{64, 0,123,__LINE__, 0x4013d5b7, 0xf217598f, 0x3fec28f5, 0xc28f5c37, 0x4013851e, 0xb851eb87},			/* 4.95871=f(0.88000, v4.88000)*/
-{64, 0,123,__LINE__, 0x4013e19e, 0xb4f04bcd, 0x3fec7ae1, 0x47ae1489, 0x40138f5c, 0x28f5c291},			/* 4.97033=f(0.89000, v4.89000)*/
-{64, 0,123,__LINE__, 0x4013ed88, 0xe24200e3, 0x3feccccc, 0xccccccdb, 0x40139999, 0x9999999b},			/* 4.98196=f(0.90000, v4.90000)*/
-{64, 0,123,__LINE__, 0x4013f976, 0x73ef9b4a, 0x3fed1eb8, 0x51eb852d, 0x4013a3d7, 0x0a3d70a6},			/* 4.99361=f(0.91000, v4.91000)*/
-{64, 0,123,__LINE__, 0x40140567, 0x63e91341, 0x3fed70a3, 0xd70a3d7f, 0x4013ae14, 0x7ae147b0},			/* 5.00527=f(0.92000, v4.92000)*/
-{64, 0,123,__LINE__, 0x4014115b, 0xac2b1ada, 0x3fedc28f, 0x5c28f5d1, 0x4013b851, 0xeb851eba},			/* 5.01695=f(0.93000, v4.93000)*/
-{64, 0,123,__LINE__, 0x40141d53, 0x46bf0244, 0x3fee147a, 0xe147ae23, 0x4013c28f, 0x5c28f5c4},			/* 5.02863=f(0.94000, v4.94000)*/
-{64, 0,123,__LINE__, 0x4014294e, 0x2dba9c39, 0x3fee6666, 0x66666675, 0x4013cccc, 0xcccccccf},			/* 5.04033=f(0.95000, v4.95000)*/
-{64, 0,123,__LINE__, 0x4014354c, 0x5b4022a5, 0x3feeb851, 0xeb851ec7, 0x4013d70a, 0x3d70a3d9},			/* 5.05204=f(0.96000, v4.96000)*/
-{64, 0,123,__LINE__, 0x4014414d, 0xc97e1b81, 0x3fef0a3d, 0x70a3d719, 0x4013e147, 0xae147ae3},			/* 5.06377=f(0.97000, v4.97000)*/
-{64, 0,123,__LINE__, 0x40144d52, 0x72af3dd4, 0x3fef5c28, 0xf5c28f6b, 0x4013eb85, 0x1eb851ed},			/* 5.07551=f(0.98000, v4.98000)*/
-{64, 0,123,__LINE__, 0x4014595a, 0x511a56f7, 0x3fefae14, 0x7ae147bd, 0x4013f5c2, 0x8f5c28f8},			/* 5.08725=f(0.99000, v4.99000)*/
-{64, 0,123,__LINE__, 0x40146565, 0x5f122ff9, 0x3ff00000, 0x00000007, 0x40140000, 0x00000002},			/* 5.09902=f(1.00000, v5.00000)*/
-{64, 0,123,__LINE__, 0x40147173, 0x96f57340, 0x3ff028f5, 0xc28f5c30, 0x40140a3d, 0x70a3d70c},			/* 5.11079=f(1.01000, v5.01000)*/
-{64, 0,123,__LINE__, 0x40147d84, 0xf32e9258, 0x3ff051eb, 0x851eb859, 0x4014147a, 0xe147ae16},			/* 5.12257=f(1.02000, v5.02000)*/
-{64, 0,123,__LINE__, 0x40148999, 0x6e33abf8, 0x3ff07ae1, 0x47ae1482, 0x40141eb8, 0x51eb8520},			/* 5.13437=f(1.03000, v5.03000)*/
-{64, 0,123,__LINE__, 0x401495b1, 0x0286722e, 0x3ff0a3d7, 0x0a3d70ab, 0x401428f5, 0xc28f5c2b},			/* 5.14618=f(1.04000, v5.04000)*/
-{64, 0,123,__LINE__, 0x4014a1cb, 0xaab410cb, 0x3ff0cccc, 0xccccccd4, 0x40143333, 0x33333335},			/* 5.15800=f(1.05000, v5.05000)*/
-{64, 0,123,__LINE__, 0x4014ade9, 0x615513ec, 0x3ff0f5c2, 0x8f5c28fd, 0x40143d70, 0xa3d70a3f},			/* 5.16983=f(1.06000, v5.06000)*/
-{64, 0,123,__LINE__, 0x4014ba0a, 0x210d4ed5, 0x3ff11eb8, 0x51eb8526, 0x401447ae, 0x147ae14a},			/* 5.18167=f(1.07000, v5.07000)*/
-{64, 0,123,__LINE__, 0x4014c62d, 0xe48bc2d8, 0x3ff147ae, 0x147ae14f, 0x401451eb, 0x851eb854},			/* 5.19353=f(1.08000, v5.08000)*/
-{64, 0,123,__LINE__, 0x4014d254, 0xa68a8688, 0x3ff170a3, 0xd70a3d78, 0x40145c28, 0xf5c28f5e},			/* 5.20540=f(1.09000, v5.09000)*/
-{64, 0,123,__LINE__, 0x4014de7e, 0x61cead12, 0x3ff19999, 0x999999a1, 0x40146666, 0x66666668},			/* 5.21727=f(1.10000, v5.10000)*/
-{64, 0,123,__LINE__, 0x4014eaab, 0x11282dcb, 0x3ff1c28f, 0x5c28f5ca, 0x401470a3, 0xd70a3d72},			/* 5.22916=f(1.11000, v5.11000)*/
-{64, 0,123,__LINE__, 0x4014f6da, 0xaf71cbeb, 0x3ff1eb85, 0x1eb851f3, 0x40147ae1, 0x47ae147d},			/* 5.24106=f(1.12000, v5.12000)*/
-{64, 0,123,__LINE__, 0x4015030d, 0x3790fe78, 0x3ff2147a, 0xe147ae1c, 0x4014851e, 0xb851eb87},			/* 5.25298=f(1.13000, v5.13000)*/
-{64, 0,123,__LINE__, 0x40150f42, 0xa475d871, 0x3ff23d70, 0xa3d70a45, 0x40148f5c, 0x28f5c291},			/* 5.26490=f(1.14000, v5.14000)*/
-{64, 0,123,__LINE__, 0x40151b7a, 0xf11af10e, 0x3ff26666, 0x6666666e, 0x40149999, 0x9999999c},			/* 5.27683=f(1.15000, v5.15000)*/
-{64, 0,123,__LINE__, 0x401527b6, 0x18854c4a, 0x3ff28f5c, 0x28f5c297, 0x4014a3d7, 0x0a3d70a6},			/* 5.28878=f(1.16000, v5.16000)*/
-{64, 0,123,__LINE__, 0x401533f4, 0x15c4438f, 0x3ff2b851, 0xeb851ec0, 0x4014ae14, 0x7ae147b0},			/* 5.30073=f(1.17000, v5.17000)*/
-{64, 0,123,__LINE__, 0x40154034, 0xe3f16e96, 0x3ff2e147, 0xae147ae9, 0x4014b851, 0xeb851eba},			/* 5.31270=f(1.18000, v5.18000)*/
-{64, 0,123,__LINE__, 0x40154c78, 0x7e308c7d, 0x3ff30a3d, 0x70a3d712, 0x4014c28f, 0x5c28f5c4},			/* 5.32467=f(1.19000, v5.19000)*/
-{64, 0,123,__LINE__, 0x401abd9a, 0x5baa74cf, 0xc01921fb, 0x54442d18, 0xc00243f6, 0xa8885a30},			/* 6.68515=f(-6.28318, v-2.28318)*/
-{64, 0,123,__LINE__, 0x40131050, 0x7b5bea4a, 0xc012d97c, 0x7f3321d2, 0xbfe6cbe3, 0xf9990e90},			/* 4.76593=f(-4.71238, v-0.71238)*/
-{64, 0,123,__LINE__, 0x400a0dd6, 0xba5fede8, 0xc00921fb, 0x54442d18, 0x3feb7812, 0xaeef4ba0},			/* 3.25675=f(-3.14159, v0.85840)*/
-{64, 0,123,__LINE__, 0x40072480, 0xfd75602a, 0xbff921fb, 0x54442d18, 0x40036f02, 0x55dde974},			/* 2.89282=f(-1.57079, v2.42920)*/
-{64, 0,123,__LINE__, 0x40100000, 0x00000000, 0x00000000, 0x00000000, 0x40100000, 0x00000000},			/* 4.00000=f(0.00000, v4.00000)*/
-{64, 0,123,__LINE__, 0x401726ee, 0xa7532df8, 0x3ff921fb, 0x54442d18, 0x4016487e, 0xd5110b46},			/* 5.78802=f(1.57079, v5.57079)*/
-{64, 0,123,__LINE__, 0x401f354c, 0x05689f98, 0x400921fb, 0x54442d18, 0x401c90fd, 0xaa22168c},			/* 7.80204=f(3.14159, v7.14159)*/
-{64, 0,123,__LINE__, 0x4023cf72, 0x09c16bf4, 0x4012d97c, 0x7f3321d2, 0x40216cbe, 0x3f9990e9},			/* 9.90516=f(4.71238, v8.71238)*/
-{64, 0,123,__LINE__, 0x4043d974, 0x74f76df3, 0xc03e0000, 0x00000000, 0xc03a0000, 0x00000000},			/* 39.6988=f(-30.0000, v-26.0000)*/
-{64, 0,123,__LINE__, 0x4042a68d, 0xee8a7839, 0xc03c4ccc, 0xcccccccd, 0xc0384ccc, 0xcccccccd},			/* 37.3012=f(-28.3000, v-24.3000)*/
-{64, 0,123,__LINE__, 0x404173c4, 0xb8d33ee7, 0xc03a9999, 0x9999999a, 0xc0369999, 0x9999999a},			/* 34.9044=f(-26.6000, v-22.6000)*/
-{64, 0,123,__LINE__, 0x4040411f, 0x4fb7bfbb, 0xc038e666, 0x66666667, 0xc034e666, 0x66666667},			/* 32.5087=f(-24.9000, v-20.9000)*/
-{64, 0,123,__LINE__, 0x403e1d4c, 0x7cd9590e, 0xc0373333, 0x33333334, 0xc0333333, 0x33333334},			/* 30.1144=f(-23.2000, v-19.2000)*/
-{64, 0,123,__LINE__, 0x403bb8ca, 0x04a0d7a3, 0xc0358000, 0x00000001, 0xc0318000, 0x00000001},			/* 27.7218=f(-21.5000, v-17.5000)*/
-{64, 0,123,__LINE__, 0x403954d6, 0xdb043b69, 0xc033cccc, 0xccccccce, 0xc02f9999, 0x9999999c},			/* 25.3314=f(-19.8000, v-15.8000)*/
-{64, 0,123,__LINE__, 0x4036f19f, 0xcae2cf4d, 0xc0321999, 0x9999999b, 0xc02c3333, 0x33333336},			/* 22.9438=f(-18.1000, v-14.1000)*/
-{64, 0,123,__LINE__, 0x40348f66, 0x5c30a146, 0xc0306666, 0x66666668, 0xc028cccc, 0xccccccd0},			/* 20.5601=f(-16.4000, v-12.4000)*/
-{64, 0,123,__LINE__, 0x40322e8e, 0x513fbcba, 0xc02d6666, 0x6666666a, 0xc0256666, 0x6666666a},			/* 18.1818=f(-14.7000, v-10.7000)*/
-{64, 0,123,__LINE__, 0x402f9f6e, 0x4990f22e, 0xc02a0000, 0x00000004, 0xc0220000, 0x00000004},			/* 15.8113=f(-13.0000, v-9.00000)*/
-{64, 0,123,__LINE__, 0x402ae7df, 0xfbbd3c68, 0xc0269999, 0x9999999e, 0xc01d3333, 0x3333333c},			/* 13.4528=f(-11.3000, v-7.30000)*/
-{64, 0,123,__LINE__, 0x40263a58, 0x55b9eb02, 0xc0233333, 0x33333338, 0xc0166666, 0x66666670},			/* 11.1139=f(-9.60000, v-5.60000)*/
-{64, 0,123,__LINE__, 0x40219ed5, 0x54be7e97, 0xc01f9999, 0x999999a3, 0xc00f3333, 0x33333346},			/* 8.81022=f(-7.90000, v-3.90000)*/
-{64, 0,123,__LINE__, 0x401a50a4, 0xce178365, 0xc018cccc, 0xccccccd6, 0xc0019999, 0x999999ac},			/* 6.57875=f(-6.20000, v-2.20000)*/
-{64, 0,123,__LINE__, 0x40121c5b, 0x70d9f82e, 0xc0120000, 0x00000009, 0xbfe00000, 0x00000048},			/* 4.52769=f(-4.50000, v-0.50000)*/
-{64, 0,123,__LINE__, 0x40085ed7, 0x614b0396, 0xc0066666, 0x66666678, 0x3ff33333, 0x33333310},			/* 3.04630=f(-2.80000, v1.20000)*/
-{64, 0,123,__LINE__, 0x4008d01a, 0x34b826cc, 0xbff19999, 0x999999bd, 0x40073333, 0x33333322},			/* 3.10161=f(-1.10000, v2.90000)*/
-{64, 0,123,__LINE__, 0x40128e4c, 0xf241b277, 0x3fe33333, 0x333332ec, 0x40126666, 0x6666665e},			/* 4.63896=f(0.60000, v4.60000)*/
-{64, 0,123,__LINE__, 0x401ad3ac, 0x9648d35c, 0x40026666, 0x66666654, 0x40193333, 0x3333332a},			/* 6.70671=f(2.30000, v6.30000)*/
-{64, 0,123,__LINE__, 0x4021e377, 0x9b97f4a2, 0x400fffff, 0xffffffee, 0x401fffff, 0xfffffff7},			/* 8.94427=f(4.00000, v8.00000)*/
-{64, 0,123,__LINE__, 0x40268065, 0xf0fd4dcb, 0x4016cccc, 0xccccccc4, 0x40236666, 0x66666662},			/* 11.2507=f(5.70000, v9.70000)*/
-{64, 0,123,__LINE__, 0x402b2eae, 0x4e93b66e, 0x401d9999, 0x99999991, 0x4026cccc, 0xccccccc8},			/* 13.5911=f(7.40000, v11.4000)*/
-{64, 0,123,__LINE__, 0x402fe6ae, 0x4dafed3f, 0x40223333, 0x3333332f, 0x402a3333, 0x3333332f},			/* 15.9505=f(9.10000, v13.1000)*/
-{64, 0,123,__LINE__, 0x40325252, 0x8aa6b462, 0x40259999, 0x99999995, 0x402d9999, 0x99999995},			/* 18.3215=f(10.8000, v14.8000)*/
-{64, 0,123,__LINE__, 0x4034b343, 0x07a4dc77, 0x4028ffff, 0xfffffffb, 0x40307fff, 0xfffffffe},			/* 20.7002=f(12.5000, v16.5000)*/
-{64, 0,123,__LINE__, 0x4037158d, 0xb8559b09, 0x402c6666, 0x66666661, 0x40323333, 0x33333330},			/* 23.0841=f(14.2000, v18.2000)*/
-{64, 0,123,__LINE__, 0x403978d1, 0x691b0d28, 0x402fcccc, 0xccccccc7, 0x4033e666, 0x66666664},			/* 25.4719=f(15.9000, v19.9000)*/
-{64, 0,123,__LINE__, 0x403bdcce, 0x1618d2df, 0x40319999, 0x99999997, 0x40359999, 0x99999997},			/* 27.8625=f(17.6000, v21.6000)*/
-{64, 0,123,__LINE__, 0x403e4157, 0xe61596b4, 0x40334ccc, 0xccccccca, 0x40374ccc, 0xccccccca},			/* 30.2552=f(19.3000, v23.3000)*/
-{64, 0,123,__LINE__, 0x40405327, 0xe8c6b33b, 0x4034ffff, 0xfffffffd, 0x4038ffff, 0xfffffffd},			/* 32.6496=f(21.0000, v25.0000)*/
-{64, 0,123,__LINE__, 0x404185cf, 0xa37bc33d, 0x4036b333, 0x33333330, 0x403ab333, 0x33333330},			/* 35.0453=f(22.7000, v26.7000)*/
-{64, 0,123,__LINE__, 0x4042b89a, 0xbc51635c, 0x40386666, 0x66666663, 0x403c6666, 0x66666663},			/* 37.4422=f(24.4000, v28.4000)*/
-{64, 0,123,__LINE__, 0x4043eb82, 0xd1289f07, 0x403a1999, 0x99999996, 0x403e1999, 0x99999996},			/* 39.8399=f(26.1000, v30.1000)*/
-{64, 0,123,__LINE__, 0x40451e82, 0xf264be59, 0x403bcccc, 0xccccccc9, 0x403fcccc, 0xccccccc9},			/* 42.2383=f(27.8000, v31.8000)*/
-{64, 0,123,__LINE__, 0x40465197, 0x3fa50845, 0x403d7fff, 0xfffffffc, 0x4040bfff, 0xfffffffe},			/* 44.6374=f(29.5000, v33.5000)*/
-0,};
-test_hypot(m)   {run_vector_1(m,hypot_vec,(char *)(hypot),"hypot","ddd");   }	
diff --git a/newlib/libm/test/hypotf_vec.c b/newlib/libm/test/hypotf_vec.c
deleted file mode 100644
index 833f05efe..000000000
--- a/newlib/libm/test/hypotf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type hypotf_vec[] = {
-{ 1, 0,123,__LINE__, 0x40085ed7, 0x6c3cac80, 0xbff33333, 0x33333333, 0x40066666, 0x66666666},			/* 3.04630=f(-1.20000, v2.80000)*/
-{ 1, 0,123,__LINE__, 0x400869a7, 0xc0f09100, 0xbff30a3d, 0x70a3d70a, 0x40067ae1, 0x47ae147b},			/* 3.05158=f(-1.19000, v2.81000)*/
-{ 1, 0,123,__LINE__, 0x40087495, 0xc5f79b40, 0xbff2e147, 0xae147ae1, 0x40068f5c, 0x28f5c290},			/* 3.05692=f(-1.18000, v2.82000)*/
-{ 1, 0,123,__LINE__, 0x40087fa1, 0x4ff59a00, 0xbff2b851, 0xeb851eb8, 0x4006a3d7, 0x0a3d70a4},			/* 3.06231=f(-1.17000, v2.83000)*/
-{ 1, 0,123,__LINE__, 0x40088ac9, 0xd61db880, 0xbff28f5c, 0x28f5c28f, 0x4006b851, 0xeb851eb8},			/* 3.06776=f(-1.16000, v2.84000)*/
-{ 1, 0,123,__LINE__, 0x4008960f, 0x82327e00, 0xbff26666, 0x66666666, 0x4006cccc, 0xcccccccd},			/* 3.07327=f(-1.15000, v2.85000)*/
-{ 1, 0,123,__LINE__, 0x4008a172, 0x2129a540, 0xbff23d70, 0xa3d70a3d, 0x4006e147, 0xae147ae2},			/* 3.07883=f(-1.14000, v2.86000)*/
-{ 1, 0,123,__LINE__, 0x4008acf1, 0x4f7e0800, 0xbff2147a, 0xe147ae14, 0x4006f5c2, 0x8f5c28f6},			/* 3.08444=f(-1.13000, v2.87000)*/
-{ 1, 0,123,__LINE__, 0x4008b88d, 0x530a6500, 0xbff1eb85, 0x1eb851eb, 0x40070a3d, 0x70a3d70a},			/* 3.09011=f(-1.12000, v2.88000)*/
-{ 1, 0,123,__LINE__, 0x4008c445, 0xacd7c380, 0xbff1c28f, 0x5c28f5c2, 0x40071eb8, 0x51eb851f},			/* 3.09583=f(-1.11000, v2.89000)*/
-{ 1, 0,123,__LINE__, 0x4008d01a, 0x427d6880, 0xbff19999, 0x99999999, 0x40073333, 0x33333334},			/* 3.10161=f(-1.10000, v2.90000)*/
-{ 1, 0,123,__LINE__, 0x4008dc0b, 0x032e7f40, 0xbff170a3, 0xd70a3d70, 0x400747ae, 0x147ae148},			/* 3.10744=f(-1.09000, v2.91000)*/
-{ 1, 0,123,__LINE__, 0x4008e817, 0xad7a5c00, 0xbff147ae, 0x147ae147, 0x40075c28, 0xf5c28f5c},			/* 3.11332=f(-1.08000, v2.92000)*/
-{ 1, 0,123,__LINE__, 0x4008f43f, 0xfd60f700, 0xbff11eb8, 0x51eb851e, 0x400770a3, 0xd70a3d71},			/* 3.11926=f(-1.07000, v2.93000)*/
-{ 1, 0,123,__LINE__, 0x40090084, 0x3971a500, 0xbff0f5c2, 0x8f5c28f5, 0x4007851e, 0xb851eb86},			/* 3.12525=f(-1.06000, v2.94000)*/
-{ 1, 0,123,__LINE__, 0x40090ce3, 0xbb97e380, 0xbff0cccc, 0xcccccccc, 0x40079999, 0x9999999a},			/* 3.13129=f(-1.05000, v2.95000)*/
-{ 1, 0,123,__LINE__, 0x4009195e, 0x9758ca00, 0xbff0a3d7, 0x0a3d70a3, 0x4007ae14, 0x7ae147ae},			/* 3.13738=f(-1.04000, v2.96000)*/
-{ 1, 0,123,__LINE__, 0x400925f4, 0xaf6ca340, 0xbff07ae1, 0x47ae147a, 0x4007c28f, 0x5c28f5c3},			/* 3.14353=f(-1.03000, v2.97000)*/
-{ 1, 0,123,__LINE__, 0x400932a5, 0xb4f22080, 0xbff051eb, 0x851eb851, 0x4007d70a, 0x3d70a3d8},			/* 3.14973=f(-1.02000, v2.98000)*/
-{ 1, 0,123,__LINE__, 0x40093f71, 0xb626ab80, 0xbff028f5, 0xc28f5c28, 0x4007eb85, 0x1eb851ec},			/* 3.15597=f(-1.01000, v2.99000)*/
-{ 1, 0,123,__LINE__, 0x40094c58, 0x30000000, 0xbfefffff, 0xfffffffe, 0x40080000, 0x00000000},			/* 3.16227=f(-0.01000, v3.00000)*/
-{ 1, 0,123,__LINE__, 0x40095959, 0x5ce47dc0, 0xbfefae14, 0x7ae147ac, 0x4008147a, 0xe147ae15},			/* 3.16862=f(-0.99000, v3.01000)*/
-{ 1, 0,123,__LINE__, 0x40096674, 0xe5a0eb00, 0xbfef5c28, 0xf5c28f5a, 0x400828f5, 0xc28f5c2a},			/* 3.17502=f(-0.98000, v3.02000)*/
-{ 1, 0,123,__LINE__, 0x400973aa, 0x7072b200, 0xbfef0a3d, 0x70a3d708, 0x40083d70, 0xa3d70a3e},			/* 3.18147=f(-0.97000, v3.03000)*/
-{ 1, 0,123,__LINE__, 0x400980fa, 0x32f36600, 0xbfeeb851, 0xeb851eb6, 0x400851eb, 0x851eb852},			/* 3.18797=f(-0.96000, v3.04000)*/
-{ 1, 0,123,__LINE__, 0x40098e64, 0x007f29c0, 0xbfee6666, 0x66666664, 0x40086666, 0x66666667},			/* 3.19452=f(-0.95000, v3.05000)*/
-{ 1, 0,123,__LINE__, 0x40099be7, 0x489b1600, 0xbfee147a, 0xe147ae12, 0x40087ae1, 0x47ae147c},			/* 3.20112=f(-0.94000, v3.06000)*/
-{ 1, 0,123,__LINE__, 0x4009a984, 0x3c13f180, 0xbfedc28f, 0x5c28f5c0, 0x40088f5c, 0x28f5c290},			/* 3.20777=f(-0.93000, v3.07000)*/
-{ 1, 0,123,__LINE__, 0x4009b73a, 0x773ba200, 0xbfed70a3, 0xd70a3d6e, 0x4008a3d7, 0x0a3d70a4},			/* 3.21446=f(-0.92000, v3.08000)*/
-{ 1, 0,123,__LINE__, 0x4009c50a, 0x28269c80, 0xbfed1eb8, 0x51eb851c, 0x4008b851, 0xeb851eb9},			/* 3.22121=f(-0.91000, v3.09000)*/
-{ 1, 0,123,__LINE__, 0x4009d2f2, 0xe778b280, 0xbfeccccc, 0xccccccca, 0x4008cccc, 0xccccccce},			/* 3.22800=f(-0.90000, v3.10000)*/
-{ 1, 0,123,__LINE__, 0x4009e0f4, 0x7d08e8c0, 0xbfec7ae1, 0x47ae1478, 0x4008e147, 0xae147ae2},			/* 3.23484=f(-0.89000, v3.11000)*/
-{ 1, 0,123,__LINE__, 0x4009ef0e, 0xe0ae4400, 0xbfec28f5, 0xc28f5c26, 0x4008f5c2, 0x8f5c28f6},			/* 3.24172=f(-0.88000, v3.12000)*/
-{ 1, 0,123,__LINE__, 0x4009fd42, 0x2a2eac00, 0xbfebd70a, 0x3d70a3d4, 0x40090a3d, 0x70a3d70b},			/* 3.24866=f(-0.87000, v3.13000)*/
-{ 1, 0,123,__LINE__, 0x400a0b8d, 0xa7e0e840, 0xbfeb851e, 0xb851eb82, 0x40091eb8, 0x51eb8520},			/* 3.25564=f(-0.86000, v3.14000)*/
-{ 1, 0,123,__LINE__, 0x400a19f1, 0xa0753400, 0xbfeb3333, 0x33333330, 0x40093333, 0x33333334},			/* 3.26266=f(-0.85000, v3.15000)*/
-{ 1, 0,123,__LINE__, 0x400a286d, 0xa10a41c0, 0xbfeae147, 0xae147ade, 0x400947ae, 0x147ae148},			/* 3.26974=f(-0.84000, v3.16000)*/
-{ 1, 0,123,__LINE__, 0x400a3701, 0x66e7ba00, 0xbfea8f5c, 0x28f5c28c, 0x40095c28, 0xf5c28f5d},			/* 3.27685=f(-0.83000, v3.17000)*/
-{ 1, 0,123,__LINE__, 0x400a45ad, 0x460d9780, 0xbfea3d70, 0xa3d70a3a, 0x400970a3, 0xd70a3d72},			/* 3.28402=f(-0.82000, v3.18000)*/
-{ 1, 0,123,__LINE__, 0x400a5470, 0xc652df00, 0xbfe9eb85, 0x1eb851e8, 0x4009851e, 0xb851eb86},			/* 3.29123=f(-0.81000, v3.19000)*/
-{ 1, 0,123,__LINE__, 0x400a634b, 0xd3659fc0, 0xbfe99999, 0x99999996, 0x40099999, 0x9999999a},			/* 3.29848=f(-0.80000, v3.20000)*/
-{ 1, 0,123,__LINE__, 0x400a723e, 0x57ac3b00, 0xbfe947ae, 0x147ae144, 0x4009ae14, 0x7ae147af},			/* 3.30578=f(-0.79000, v3.21000)*/
-{ 1, 0,123,__LINE__, 0x400a8147, 0xd53b2680, 0xbfe8f5c2, 0x8f5c28f2, 0x4009c28f, 0x5c28f5c4},			/* 3.31312=f(-0.78000, v3.22000)*/
-{ 1, 0,123,__LINE__, 0x400a9068, 0x9a4fce00, 0xbfe8a3d7, 0x0a3d70a0, 0x4009d70a, 0x3d70a3d8},			/* 3.32051=f(-0.77000, v3.23000)*/
-{ 1, 0,123,__LINE__, 0x400a9fa0, 0x25cb7440, 0xbfe851eb, 0x851eb84e, 0x4009eb85, 0x1eb851ec},			/* 3.32794=f(-0.76000, v3.24000)*/
-{ 1, 0,123,__LINE__, 0x400aaeee, 0x90000000, 0xbfe7ffff, 0xfffffffc, 0x400a0000, 0x00000001},			/* 3.33541=f(-0.75000, v3.25000)*/
-{ 1, 0,123,__LINE__, 0x400abe53, 0x88499580, 0xbfe7ae14, 0x7ae147aa, 0x400a147a, 0xe147ae16},			/* 3.34293=f(-0.74000, v3.26000)*/
-{ 1, 0,123,__LINE__, 0x400acdce, 0xf06abf80, 0xbfe75c28, 0xf5c28f58, 0x400a28f5, 0xc28f5c2a},			/* 3.35049=f(-0.73000, v3.27000)*/
-{ 1, 0,123,__LINE__, 0x400add60, 0xa8de5ac0, 0xbfe70a3d, 0x70a3d706, 0x400a3d70, 0xa3d70a3e},			/* 3.35809=f(-0.72000, v3.28000)*/
-{ 1, 0,123,__LINE__, 0x400aed08, 0x90d79600, 0xbfe6b851, 0xeb851eb4, 0x400a51eb, 0x851eb853},			/* 3.36573=f(-0.71000, v3.29000)*/
-{ 1, 0,123,__LINE__, 0x400afcc6, 0x8641f200, 0xbfe66666, 0x66666662, 0x400a6666, 0x66666668},			/* 3.37342=f(-0.70000, v3.30000)*/
-{ 1, 0,123,__LINE__, 0x400b0c9a, 0x30cb7f00, 0xbfe6147a, 0xe147ae10, 0x400a7ae1, 0x47ae147c},			/* 3.38115=f(-0.69000, v3.31000)*/
-{ 1, 0,123,__LINE__, 0x400b1c83, 0xa07438c0, 0xbfe5c28f, 0x5c28f5be, 0x400a8f5c, 0x28f5c290},			/* 3.38892=f(-0.68000, v3.32000)*/
-{ 1, 0,123,__LINE__, 0x400b2c82, 0xaf509600, 0xbfe570a3, 0xd70a3d6c, 0x400aa3d7, 0x0a3d70a5},			/* 3.39673=f(-0.67000, v3.33000)*/
-{ 1, 0,123,__LINE__, 0x400b3c97, 0x362d5f80, 0xbfe51eb8, 0x51eb851a, 0x400ab851, 0xeb851eba},			/* 3.40458=f(-0.66000, v3.34000)*/
-{ 1, 0,123,__LINE__, 0x400b4cc0, 0xd6f61680, 0xbfe4cccc, 0xccccccc8, 0x400acccc, 0xccccccce},			/* 3.41247=f(-0.65000, v3.35000)*/
-{ 1, 0,123,__LINE__, 0x400b5cff, 0x9d2fd5c0, 0xbfe47ae1, 0x47ae1476, 0x400ae147, 0xae147ae2},			/* 3.42040=f(-0.64000, v3.36000)*/
-{ 1, 0,123,__LINE__, 0x400b6d53, 0x27e4d700, 0xbfe428f5, 0xc28f5c24, 0x400af5c2, 0x8f5c28f7},			/* 3.42838=f(-0.63000, v3.37000)*/
-{ 1, 0,123,__LINE__, 0x400b7dbb, 0xd6f9ed00, 0xbfe3d70a, 0x3d70a3d2, 0x400b0a3d, 0x70a3d70c},			/* 3.43639=f(-0.62000, v3.38000)*/
-{ 1, 0,123,__LINE__, 0x400b8e39, 0x3c39e3c0, 0xbfe3851e, 0xb851eb80, 0x400b1eb8, 0x51eb8520},			/* 3.44444=f(-0.61000, v3.39000)*/
-{ 1, 0,123,__LINE__, 0x400b9eca, 0xdcff6e80, 0xbfe33333, 0x3333332e, 0x400b3333, 0x33333334},			/* 3.45253=f(-0.60000, v3.40000)*/
-{ 1, 0,123,__LINE__, 0x400baf70, 0xf5c56ac0, 0xbfe2e147, 0xae147adc, 0x400b47ae, 0x147ae149},			/* 3.46066=f(-0.59000, v3.41000)*/
-{ 1, 0,123,__LINE__, 0x400bc02b, 0x55961200, 0xbfe28f5c, 0x28f5c28a, 0x400b5c28, 0xf5c28f5e},			/* 3.46883=f(-0.58000, v3.42000)*/
-{ 1, 0,123,__LINE__, 0x400bd0f9, 0xca33efc0, 0xbfe23d70, 0xa3d70a38, 0x400b70a3, 0xd70a3d72},			/* 3.47703=f(-0.57000, v3.43000)*/
-{ 1, 0,123,__LINE__, 0x400be1dc, 0x57241f00, 0xbfe1eb85, 0x1eb851e6, 0x400b851e, 0xb851eb86},			/* 3.48528=f(-0.56000, v3.44000)*/
-{ 1, 0,123,__LINE__, 0x400bf2d2, 0x90e17d40, 0xbfe19999, 0x99999994, 0x400b9999, 0x9999999b},			/* 3.49356=f(-0.55000, v3.45000)*/
-{ 1, 0,123,__LINE__, 0x400c03dc, 0x78b3b500, 0xbfe147ae, 0x147ae142, 0x400bae14, 0x7ae147b0},			/* 3.50188=f(-0.54000, v3.46000)*/
-{ 1, 0,123,__LINE__, 0x400c14f9, 0xd7b97b00, 0xbfe0f5c2, 0x8f5c28f0, 0x400bc28f, 0x5c28f5c4},			/* 3.51024=f(-0.53000, v3.47000)*/
-{ 1, 0,123,__LINE__, 0x400c262a, 0xad77ea80, 0xbfe0a3d7, 0x0a3d709e, 0x400bd70a, 0x3d70a3d8},			/* 3.51863=f(-0.52000, v3.48000)*/
-{ 1, 0,123,__LINE__, 0x400c376e, 0xc0f93d80, 0xbfe051eb, 0x851eb84c, 0x400beb85, 0x1eb851ed},			/* 3.52706=f(-0.51000, v3.49000)*/
-{ 1, 0,123,__LINE__, 0x400c48c6, 0x10000000, 0xbfdfffff, 0xfffffff4, 0x400c0000, 0x00000002},			/* 3.53553=f(-0.50000, v3.50000)*/
-{ 1, 0,123,__LINE__, 0x400c5a30, 0x2758fb80, 0xbfdf5c28, 0xf5c28f50, 0x400c147a, 0xe147ae16},			/* 3.54403=f(-0.49000, v3.51000)*/
-{ 1, 0,123,__LINE__, 0x400c6bad, 0x3adb3700, 0xbfdeb851, 0xeb851eac, 0x400c28f5, 0xc28f5c2a},			/* 3.55257=f(-0.48000, v3.52000)*/
-{ 1, 0,123,__LINE__, 0x400c7d3d, 0x0d67f700, 0xbfde147a, 0xe147ae08, 0x400c3d70, 0xa3d70a3f},			/* 3.56115=f(-0.47000, v3.53000)*/
-{ 1, 0,123,__LINE__, 0x400c8edf, 0x6098d200, 0xbfdd70a3, 0xd70a3d64, 0x400c51eb, 0x851eb854},			/* 3.56976=f(-0.46000, v3.54000)*/
-{ 1, 0,123,__LINE__, 0x400ca093, 0xf4bfb080, 0xbfdccccc, 0xccccccc0, 0x400c6666, 0x66666668},			/* 3.57840=f(-0.45000, v3.55000)*/
-{ 1, 0,123,__LINE__, 0x400cb25b, 0x33c81480, 0xbfdc28f5, 0xc28f5c1c, 0x400c7ae1, 0x47ae147c},			/* 3.58708=f(-0.44000, v3.56000)*/
-{ 1, 0,123,__LINE__, 0x400cc434, 0x6aa7bdc0, 0xbfdb851e, 0xb851eb78, 0x400c8f5c, 0x28f5c291},			/* 3.59580=f(-0.43000, v3.57000)*/
-{ 1, 0,123,__LINE__, 0x400cd61f, 0xc8e3c800, 0xbfdae147, 0xae147ad4, 0x400ca3d7, 0x0a3d70a6},			/* 3.60455=f(-0.42000, v3.58000)*/
-{ 1, 0,123,__LINE__, 0x400ce81c, 0xd1af63c0, 0xbfda3d70, 0xa3d70a30, 0x400cb851, 0xeb851eba},			/* 3.61333=f(-0.41000, v3.59000)*/
-{ 1, 0,123,__LINE__, 0x400cfa2b, 0xecb8a280, 0xbfd99999, 0x9999998c, 0x400ccccc, 0xccccccce},			/* 3.62215=f(-0.40000, v3.60000)*/
-{ 1, 0,123,__LINE__, 0x400d0c4c, 0x6184a080, 0xbfd8f5c2, 0x8f5c28e8, 0x400ce147, 0xae147ae3},			/* 3.63100=f(-0.39000, v3.61000)*/
-{ 1, 0,123,__LINE__, 0x400d1e7e, 0x96a2b700, 0xbfd851eb, 0x851eb844, 0x400cf5c2, 0x8f5c28f8},			/* 3.63989=f(-0.38000, v3.62000)*/
-{ 1, 0,123,__LINE__, 0x400d30c2, 0x65331800, 0xbfd7ae14, 0x7ae147a0, 0x400d0a3d, 0x70a3d70c},			/* 3.64880=f(-0.37000, v3.63000)*/
-{ 1, 0,123,__LINE__, 0x400d4317, 0x448c7740, 0xbfd70a3d, 0x70a3d6fc, 0x400d1eb8, 0x51eb8520},			/* 3.65775=f(-0.36000, v3.64000)*/
-{ 1, 0,123,__LINE__, 0x400d557d, 0x0b423b00, 0xbfd66666, 0x66666658, 0x400d3333, 0x33333335},			/* 3.66674=f(-0.35000, v3.65000)*/
-{ 1, 0,123,__LINE__, 0x400d67f4, 0x1e212d80, 0xbfd5c28f, 0x5c28f5b4, 0x400d47ae, 0x147ae14a},			/* 3.67575=f(-0.34000, v3.66000)*/
-{ 1, 0,123,__LINE__, 0x400d7a7b, 0xf7b8a800, 0xbfd51eb8, 0x51eb8510, 0x400d5c28, 0xf5c28f5e},			/* 3.68480=f(-0.33000, v3.67000)*/
-{ 1, 0,123,__LINE__, 0x400d8d14, 0x866f0e40, 0xbfd47ae1, 0x47ae146c, 0x400d70a3, 0xd70a3d72},			/* 3.69388=f(-0.32000, v3.68000)*/
-{ 1, 0,123,__LINE__, 0x400d9fbd, 0xb806ed00, 0xbfd3d70a, 0x3d70a3c8, 0x400d851e, 0xb851eb87},			/* 3.70299=f(-0.31000, v3.69000)*/
-{ 1, 0,123,__LINE__, 0x400db277, 0xb4d22d40, 0xbfd33333, 0x33333324, 0x400d9999, 0x9999999c},			/* 3.71214=f(-0.30000, v3.70000)*/
-{ 1, 0,123,__LINE__, 0x400dc541, 0xb7b21400, 0xbfd28f5c, 0x28f5c280, 0x400dae14, 0x7ae147b0},			/* 3.72131=f(-0.29000, v3.71000)*/
-{ 1, 0,123,__LINE__, 0x400dd81c, 0x5e1742c0, 0xbfd1eb85, 0x1eb851dc, 0x400dc28f, 0x5c28f5c4},			/* 3.73052=f(-0.28000, v3.72000)*/
-{ 1, 0,123,__LINE__, 0x400deb06, 0xe0a58e00, 0xbfd147ae, 0x147ae138, 0x400dd70a, 0x3d70a3d9},			/* 3.73975=f(-0.27000, v3.73000)*/
-{ 1, 0,123,__LINE__, 0x400dfe01, 0xa0a4a180, 0xbfd0a3d7, 0x0a3d7094, 0x400deb85, 0x1eb851ee},			/* 3.74902=f(-0.26000, v3.74000)*/
-{ 1, 0,123,__LINE__, 0x400e110c, 0x4c000000, 0xbfcfffff, 0xffffffe0, 0x400e0000, 0x00000002},			/* 3.75832=f(-0.25000, v3.75000)*/
-{ 1, 0,123,__LINE__, 0x400e2426, 0x8f5b7e40, 0xbfceb851, 0xeb851e98, 0x400e147a, 0xe147ae16},			/* 3.76765=f(-0.24000, v3.76000)*/
-{ 1, 0,123,__LINE__, 0x400e3750, 0xcb090580, 0xbfcd70a3, 0xd70a3d50, 0x400e28f5, 0xc28f5c2b},			/* 3.77700=f(-0.23000, v3.77000)*/
-{ 1, 0,123,__LINE__, 0x400e4a8a, 0x3197efc0, 0xbfcc28f5, 0xc28f5c08, 0x400e3d70, 0xa3d70a40},			/* 3.78639=f(-0.22000, v3.78000)*/
-{ 1, 0,123,__LINE__, 0x400e5dd3, 0x5edf4500, 0xbfcae147, 0xae147ac0, 0x400e51eb, 0x851eb854},			/* 3.79581=f(-0.21000, v3.79000)*/
-{ 1, 0,123,__LINE__, 0x400e712b, 0xbffdbb80, 0xbfc99999, 0x99999978, 0x400e6666, 0x66666668},			/* 3.80525=f(-0.20000, v3.80000)*/
-{ 1, 0,123,__LINE__, 0x400e8493, 0xb3fd8e80, 0xbfc851eb, 0x851eb830, 0x400e7ae1, 0x47ae147d},			/* 3.81473=f(-0.19000, v3.81000)*/
-{ 1, 0,123,__LINE__, 0x400e980a, 0x68f33700, 0xbfc70a3d, 0x70a3d6e8, 0x400e8f5c, 0x28f5c292},			/* 3.82423=f(-0.18000, v3.82000)*/
-{ 1, 0,123,__LINE__, 0x400eab8f, 0xff828a00, 0xbfc5c28f, 0x5c28f5a0, 0x400ea3d7, 0x0a3d70a6},			/* 3.83377=f(-0.17000, v3.83000)*/
-{ 1, 0,123,__LINE__, 0x400ebf24, 0xd5c00040, 0xbfc47ae1, 0x47ae1458, 0x400eb851, 0xeb851eba},			/* 3.84333=f(-0.16000, v3.84000)*/
-{ 1, 0,123,__LINE__, 0x400ed2c8, 0x53fd8380, 0xbfc33333, 0x33333310, 0x400ecccc, 0xcccccccf},			/* 3.85292=f(-0.15000, v3.85000)*/
-{ 1, 0,123,__LINE__, 0x400ee67a, 0x5c269700, 0xbfc1eb85, 0x1eb851c8, 0x400ee147, 0xae147ae4},			/* 3.86253=f(-0.14000, v3.86000)*/
-{ 1, 0,123,__LINE__, 0x400efa3b, 0x0d6e6c00, 0xbfc0a3d7, 0x0a3d7080, 0x400ef5c2, 0x8f5c28f8},			/* 3.87218=f(-0.13000, v3.87000)*/
-{ 1, 0,123,__LINE__, 0x400f0e0a, 0x2ae32900, 0xbfbeb851, 0xeb851e71, 0x400f0a3d, 0x70a3d70c},			/* 3.88185=f(-0.12000, v3.88000)*/
-{ 1, 0,123,__LINE__, 0x400f21e7, 0x92b9c2c0, 0xbfbc28f5, 0xc28f5be2, 0x400f1eb8, 0x51eb8521},			/* 3.89155=f(-0.11000, v3.89000)*/
-{ 1, 0,123,__LINE__, 0x400f35d3, 0x44cde080, 0xbfb99999, 0x99999953, 0x400f3333, 0x33333335},			/* 3.90128=f(-0.00100, v3.90000)*/
-{ 1, 0,123,__LINE__, 0x400f49cd, 0x2052b380, 0xbfb70a3d, 0x70a3d6c4, 0x400f47ae, 0x147ae14a},			/* 3.91103=f(-0.09000, v3.91000)*/
-{ 1, 0,123,__LINE__, 0x400f5dd5, 0x03d79600, 0xbfb47ae1, 0x47ae1435, 0x400f5c28, 0xf5c28f5e},			/* 3.92081=f(-0.08000, v3.92000)*/
-{ 1, 0,123,__LINE__, 0x400f71ea, 0x8e66c380, 0xbfb1eb85, 0x1eb851a6, 0x400f70a3, 0xd70a3d73},			/* 3.93062=f(-0.07000, v3.93000)*/
-{ 1, 0,123,__LINE__, 0x400f860e, 0x1ae18200, 0xbfaeb851, 0xeb851e2d, 0x400f851e, 0xb851eb87},			/* 3.94045=f(-0.06000, v3.94000)*/
-{ 1, 0,123,__LINE__, 0x400f9a3f, 0x86668800, 0xbfa99999, 0x9999990e, 0x400f9999, 0x9999999c},			/* 3.95031=f(-0.05000, v3.95000)*/
-{ 1, 0,123,__LINE__, 0x400fae7e, 0x6e148c00, 0xbfa47ae1, 0x47ae13ef, 0x400fae14, 0x7ae147b0},			/* 3.96020=f(-0.04000, v3.96000)*/
-{ 1, 0,123,__LINE__, 0x400fc2ca, 0xad47b540, 0xbf9eb851, 0xeb851da0, 0x400fc28f, 0x5c28f5c5},			/* 3.97011=f(-0.03000, v3.97000)*/
-{ 1, 0,123,__LINE__, 0x400fd724, 0x9e147d00, 0xbf947ae1, 0x47ae1362, 0x400fd70a, 0x3d70a3d9},			/* 3.98005=f(-0.02000, v3.98000)*/
-{ 1, 0,123,__LINE__, 0x400feb8b, 0x9bd70a80, 0xbf847ae1, 0x47ae1249, 0x400feb85, 0x1eb851ee},			/* 3.99001=f(-0.00010, v3.99000)*/
-{ 1, 0,123,__LINE__, 0x40100000, 0x00000000, 0x3cd19000, 0x00000000, 0x40100000, 0x00000001},			/* 4.00000=f(9.74915e-16, v4.00000)*/
-{ 1, 0,123,__LINE__, 0x40100a40, 0xc2147e00, 0x3f847ae1, 0x47ae16ad, 0x40100a3d, 0x70a3d70b},			/* 4.01001=f(0.01000, v4.01000)*/
-{ 1, 0,123,__LINE__, 0x40101487, 0xf0a3d600, 0x3f947ae1, 0x47ae1594, 0x4010147a, 0xe147ae16},			/* 4.02005=f(0.02000, v4.02000)*/
-{ 1, 0,123,__LINE__, 0x40101ed5, 0x97ae2e00, 0x3f9eb851, 0xeb851fd2, 0x40101eb8, 0x51eb8520},			/* 4.03011=f(0.03000, v4.03000)*/
-{ 1, 0,123,__LINE__, 0x40102929, 0xa3851680, 0x3fa47ae1, 0x47ae1508, 0x401028f5, 0xc28f5c2a},			/* 4.04019=f(0.04000, v4.04000)*/
-{ 1, 0,123,__LINE__, 0x40103384, 0x1f99d980, 0x3fa99999, 0x99999a27, 0x40103333, 0x33333334},			/* 4.05030=f(0.05000, v4.05000)*/
-{ 1, 0,123,__LINE__, 0x40103de4, 0xd7adf900, 0x3faeb851, 0xeb851f46, 0x40103d70, 0xa3d70a3f},			/* 4.06044=f(0.06000, v4.06000)*/
-{ 1, 0,123,__LINE__, 0x4010484b, 0xd666d600, 0x3fb1eb85, 0x1eb85232, 0x401047ae, 0x147ae149},			/* 4.07060=f(0.07000, v4.07000)*/
-{ 1, 0,123,__LINE__, 0x401052b9, 0x07add400, 0x3fb47ae1, 0x47ae14c1, 0x401051eb, 0x851eb853},			/* 4.08078=f(0.08000, v4.08000)*/
-{ 1, 0,123,__LINE__, 0x40105d2c, 0x96528e00, 0x3fb70a3d, 0x70a3d750, 0x40105c28, 0xf5c28f5d},			/* 4.09099=f(0.09000, v4.09000)*/
-{ 1, 0,123,__LINE__, 0x401067a6, 0x0bff8340, 0x3fb99999, 0x999999df, 0x40106666, 0x66666667},			/* 4.10121=f(0.10000, v4.10000)*/
-{ 1, 0,123,__LINE__, 0x40107225, 0xb385f100, 0x3fbc28f5, 0xc28f5c6e, 0x401070a3, 0xd70a3d72},			/* 4.11147=f(0.11000, v4.11000)*/
-{ 1, 0,123,__LINE__, 0x40107cab, 0x36b77c80, 0x3fbeb851, 0xeb851efd, 0x40107ae1, 0x47ae147c},			/* 4.12174=f(0.12000, v4.12000)*/
-{ 1, 0,123,__LINE__, 0x40108736, 0xe029ef00, 0x3fc0a3d7, 0x0a3d70c6, 0x4010851e, 0xb851eb86},			/* 4.13204=f(0.13000, v4.13000)*/
-{ 1, 0,123,__LINE__, 0x401091c8, 0x7a6516c0, 0x3fc1eb85, 0x1eb8520e, 0x40108f5c, 0x28f5c290},			/* 4.14236=f(0.14000, v4.14000)*/
-{ 1, 0,123,__LINE__, 0x40109c60, 0x0d9aab80, 0x3fc33333, 0x33333356, 0x40109999, 0x9999999b},			/* 4.15271=f(0.15000, v4.15000)*/
-{ 1, 0,123,__LINE__, 0x4010a6fd, 0x428d6c00, 0x3fc47ae1, 0x47ae149e, 0x4010a3d7, 0x0a3d70a5},			/* 4.16307=f(0.16000, v4.16000)*/
-{ 1, 0,123,__LINE__, 0x4010b1a0, 0x847bf800, 0x3fc5c28f, 0x5c28f5e6, 0x4010ae14, 0x7ae147af},			/* 4.17346=f(0.17000, v4.17000)*/
-{ 1, 0,123,__LINE__, 0x4010bc49, 0x5a8ca080, 0x3fc70a3d, 0x70a3d72e, 0x4010b851, 0xeb851eb9},			/* 4.18387=f(0.18000, v4.18000)*/
-{ 1, 0,123,__LINE__, 0x4010c6f8, 0x0e676900, 0x3fc851eb, 0x851eb876, 0x4010c28f, 0x5c28f5c4},			/* 4.19430=f(0.19000, v4.19000)*/
-{ 1, 0,123,__LINE__, 0x4010d1ac, 0x6995e300, 0x3fc99999, 0x999999be, 0x4010cccc, 0xccccccce},			/* 4.20475=f(0.20000, v4.20000)*/
-{ 1, 0,123,__LINE__, 0x4010dc66, 0x72673700, 0x3fcae147, 0xae147b06, 0x4010d70a, 0x3d70a3d8},			/* 4.21523=f(0.21000, v4.21000)*/
-{ 1, 0,123,__LINE__, 0x4010e725, 0xf1e6a000, 0x3fcc28f5, 0xc28f5c4e, 0x4010e147, 0xae147ae2},			/* 4.22573=f(0.22000, v4.22000)*/
-{ 1, 0,123,__LINE__, 0x4010f1eb, 0x0f711fc0, 0x3fcd70a3, 0xd70a3d96, 0x4010eb85, 0x1eb851ed},			/* 4.23624=f(0.23000, v4.23000)*/
-{ 1, 0,123,__LINE__, 0x4010fcb5, 0xb5bc4400, 0x3fceb851, 0xeb851ede, 0x4010f5c2, 0x8f5c28f7},			/* 4.24678=f(0.24000, v4.24000)*/
-{ 1, 0,123,__LINE__, 0x40110785, 0xc8000000, 0x3fd00000, 0x00000013, 0x40110000, 0x00000001},			/* 4.25734=f(0.25000, v4.25000)*/
-{ 1, 0,123,__LINE__, 0x4011125b, 0x72bfa300, 0x3fd0a3d7, 0x0a3d70b7, 0x40110a3d, 0x70a3d70b},			/* 4.26792=f(0.26000, v4.26000)*/
-{ 1, 0,123,__LINE__, 0x40111d36, 0x5a7a39c0, 0x3fd147ae, 0x147ae15b, 0x4011147a, 0xe147ae16},			/* 4.27852=f(0.27000, v4.27000)*/
-{ 1, 0,123,__LINE__, 0x40112816, 0xc7b5c900, 0x3fd1eb85, 0x1eb851ff, 0x40111eb8, 0x51eb8520},			/* 4.28914=f(0.28000, v4.28000)*/
-{ 1, 0,123,__LINE__, 0x401132fc, 0x6064e780, 0x3fd28f5c, 0x28f5c2a3, 0x401128f5, 0xc28f5c2a},			/* 4.29979=f(0.29000, v4.29000)*/
-{ 1, 0,123,__LINE__, 0x40113de7, 0x4a6e5d80, 0x3fd33333, 0x33333347, 0x40113333, 0x33333334},			/* 4.31045=f(0.30000, v4.30000)*/
-{ 1, 0,123,__LINE__, 0x401148d7, 0x7011f0c0, 0x3fd3d70a, 0x3d70a3eb, 0x40113d70, 0xa3d70a3f},			/* 4.32113=f(0.31000, v4.31000)*/
-{ 1, 0,123,__LINE__, 0x401153cc, 0xd482f5c0, 0x3fd47ae1, 0x47ae148f, 0x401147ae, 0x147ae149},			/* 4.33183=f(0.32000, v4.32000)*/
-{ 1, 0,123,__LINE__, 0x40115ec7, 0x3f43e100, 0x3fd51eb8, 0x51eb8533, 0x401151eb, 0x851eb853},			/* 4.34255=f(0.33000, v4.33000)*/
-{ 1, 0,123,__LINE__, 0x401169c6, 0xf830fe00, 0x3fd5c28f, 0x5c28f5d7, 0x40115c28, 0xf5c28f5d},			/* 4.35329=f(0.34000, v4.34000)*/
-{ 1, 0,123,__LINE__, 0x401174cb, 0x812de7c0, 0x3fd66666, 0x6666667b, 0x40116666, 0x66666668},			/* 4.36405=f(0.35000, v4.35000)*/
-{ 1, 0,123,__LINE__, 0x40117fd5, 0x4482af80, 0x3fd70a3d, 0x70a3d71f, 0x401170a3, 0xd70a3d72},			/* 4.37483=f(0.36000, v4.36000)*/
-{ 1, 0,123,__LINE__, 0x40118ae4, 0x09699b00, 0x3fd7ae14, 0x7ae147c3, 0x40117ae1, 0x47ae147c},			/* 4.38563=f(0.37000, v4.37000)*/
-{ 1, 0,123,__LINE__, 0x401195f7, 0xd1780680, 0x3fd851eb, 0x851eb867, 0x4011851e, 0xb851eb86},			/* 4.39645=f(0.38000, v4.38000)*/
-{ 1, 0,123,__LINE__, 0x4011a110, 0x63679b40, 0x3fd8f5c2, 0x8f5c290b, 0x40118f5c, 0x28f5c291},			/* 4.40728=f(0.39000, v4.39000)*/
-{ 1, 0,123,__LINE__, 0x4011ac2e, 0x066d2800, 0x3fd99999, 0x999999af, 0x40119999, 0x9999999b},			/* 4.41814=f(0.40000, v4.40000)*/
-{ 1, 0,123,__LINE__, 0x4011b750, 0x5df4b200, 0x3fda3d70, 0xa3d70a53, 0x4011a3d7, 0x0a3d70a5},			/* 4.42901=f(0.41000, v4.41000)*/
-{ 1, 0,123,__LINE__, 0x4011c277, 0xb0fbaa00, 0x3fdae147, 0xae147af7, 0x4011ae14, 0x7ae147af},			/* 4.43991=f(0.42000, v4.42000)*/
-{ 1, 0,123,__LINE__, 0x4011cda3, 0xc5f223c0, 0x3fdb851e, 0xb851eb9b, 0x4011b851, 0xeb851eba},			/* 4.45082=f(0.43000, v4.43000)*/
-{ 1, 0,123,__LINE__, 0x4011d8d4, 0x9cd19d80, 0x3fdc28f5, 0xc28f5c3f, 0x4011c28f, 0x5c28f5c4},			/* 4.46174=f(0.44000, v4.44000)*/
-{ 1, 0,123,__LINE__, 0x4011e40a, 0x1f227d00, 0x3fdccccc, 0xcccccce3, 0x4011cccc, 0xccccccce},			/* 4.47269=f(0.45000, v4.45000)*/
-{ 1, 0,123,__LINE__, 0x4011ef44, 0x4c556580, 0x3fdd70a3, 0xd70a3d87, 0x4011d70a, 0x3d70a3d8},			/* 4.48365=f(0.46000, v4.46000)*/
-{ 1, 0,123,__LINE__, 0x4011fa83, 0x319a35c0, 0x3fde147a, 0xe147ae2b, 0x4011e147, 0xae147ae3},			/* 4.49464=f(0.47000, v4.47000)*/
-{ 1, 0,123,__LINE__, 0x401205c6, 0xce165b00, 0x3fdeb851, 0xeb851ecf, 0x4011eb85, 0x1eb851ed},			/* 4.50564=f(0.48000, v4.48000)*/
-{ 1, 0,123,__LINE__, 0x4012110e, 0xc3824100, 0x3fdf5c28, 0xf5c28f73, 0x4011f5c2, 0x8f5c28f7},			/* 4.51665=f(0.49000, v4.49000)*/
-{ 1, 0,123,__LINE__, 0x40121c5b, 0x7c000000, 0x3fe00000, 0x0000000b, 0x40120000, 0x00000001},			/* 4.52769=f(0.50000, v4.50000)*/
-{ 1, 0,123,__LINE__, 0x401227ac, 0xb94c4300, 0x3fe051eb, 0x851eb85d, 0x40120a3d, 0x70a3d70c},			/* 4.53874=f(0.51000, v4.51000)*/
-{ 1, 0,123,__LINE__, 0x40123302, 0x3ccaa380, 0x3fe0a3d7, 0x0a3d70af, 0x4012147a, 0xe147ae16},			/* 4.54981=f(0.52000, v4.52000)*/
-{ 1, 0,123,__LINE__, 0x40123e5c, 0x4c6a8180, 0x3fe0f5c2, 0x8f5c2901, 0x40121eb8, 0x51eb8520},			/* 4.56089=f(0.53000, v4.53000)*/
-{ 1, 0,123,__LINE__, 0x401249ba, 0xd194fb00, 0x3fe147ae, 0x147ae153, 0x401228f5, 0xc28f5c2a},			/* 4.57200=f(0.54000, v4.54000)*/
-{ 1, 0,123,__LINE__, 0x4012551d, 0xc9b17400, 0x3fe19999, 0x999999a5, 0x40123333, 0x33333335},			/* 4.58312=f(0.55000, v4.55000)*/
-{ 1, 0,123,__LINE__, 0x40126084, 0xf9923700, 0x3fe1eb85, 0x1eb851f7, 0x40123d70, 0xa3d70a3f},			/* 4.59425=f(0.56000, v4.56000)*/
-{ 1, 0,123,__LINE__, 0x40126bf0, 0xa6f82180, 0x3fe23d70, 0xa3d70a49, 0x401247ae, 0x147ae149},			/* 4.60541=f(0.57000, v4.57000)*/
-{ 1, 0,123,__LINE__, 0x40127760, 0x720a0300, 0x3fe28f5c, 0x28f5c29b, 0x401251eb, 0x851eb853},			/* 4.61657=f(0.58000, v4.58000)*/
-{ 1, 0,123,__LINE__, 0x401282d4, 0xa0530200, 0x3fe2e147, 0xae147aed, 0x40125c28, 0xf5c28f5e},			/* 4.62776=f(0.59000, v4.59000)*/
-{ 1, 0,123,__LINE__, 0x40128e4c, 0xf6588580, 0x3fe33333, 0x3333333f, 0x40126666, 0x66666668},			/* 4.63896=f(0.60000, v4.60000)*/
-{ 1, 0,123,__LINE__, 0x401299c9, 0x94cc5040, 0x3fe3851e, 0xb851eb91, 0x401270a3, 0xd70a3d72},			/* 4.65018=f(0.61000, v4.61000)*/
-{ 1, 0,123,__LINE__, 0x4012a54a, 0x3fee6000, 0x3fe3d70a, 0x3d70a3e3, 0x40127ae1, 0x47ae147c},			/* 4.66141=f(0.62000, v4.62000)*/
-{ 1, 0,123,__LINE__, 0x4012b0cf, 0x18121e00, 0x3fe428f5, 0xc28f5c35, 0x4012851e, 0xb851eb87},			/* 4.67266=f(0.63000, v4.63000)*/
-{ 1, 0,123,__LINE__, 0x4012bc58, 0x2b6f6740, 0x3fe47ae1, 0x47ae1487, 0x40128f5c, 0x28f5c291},			/* 4.68393=f(0.64000, v4.64000)*/
-{ 1, 0,123,__LINE__, 0x4012c7e5, 0x500fee00, 0x3fe4cccc, 0xccccccd9, 0x40129999, 0x9999999b},			/* 4.69521=f(0.65000, v4.65000)*/
-{ 1, 0,123,__LINE__, 0x4012d376, 0x49a86600, 0x3fe51eb8, 0x51eb852b, 0x4012a3d7, 0x0a3d70a5},			/* 4.70650=f(0.66000, v4.66000)*/
-{ 1, 0,123,__LINE__, 0x4012df0b, 0x82884d00, 0x3fe570a3, 0xd70a3d7d, 0x4012ae14, 0x7ae147b0},			/* 4.71781=f(0.67000, v4.67000)*/
-{ 1, 0,123,__LINE__, 0x4012eaa4, 0x9928b640, 0x3fe5c28f, 0x5c28f5cf, 0x4012b851, 0xeb851eba},			/* 4.72914=f(0.68000, v4.68000)*/
-{ 1, 0,123,__LINE__, 0x4012f641, 0xad005780, 0x3fe6147a, 0xe147ae21, 0x4012c28f, 0x5c28f5c4},			/* 4.74048=f(0.69000, v4.69000)*/
-{ 1, 0,123,__LINE__, 0x401301e2, 0xcca8a800, 0x3fe66666, 0x66666673, 0x4012cccc, 0xccccccce},			/* 4.75184=f(0.70000, v4.70000)*/
-{ 1, 0,123,__LINE__, 0x40130d87, 0xcc595300, 0x3fe6b851, 0xeb851ec5, 0x4012d70a, 0x3d70a3d9},			/* 4.76321=f(0.71000, v4.71000)*/
-{ 1, 0,123,__LINE__, 0x40131930, 0x94f50640, 0x3fe70a3d, 0x70a3d717, 0x4012e147, 0xae147ae3},			/* 4.77460=f(0.72000, v4.72000)*/
-{ 1, 0,123,__LINE__, 0x401324dd, 0x45748500, 0x3fe75c28, 0xf5c28f69, 0x4012eb85, 0x1eb851ed},			/* 4.78600=f(0.73000, v4.73000)*/
-{ 1, 0,123,__LINE__, 0x4013308d, 0xc6da9c00, 0x3fe7ae14, 0x7ae147bb, 0x4012f5c2, 0x8f5c28f7},			/* 4.79741=f(0.74000, v4.74000)*/
-{ 1, 0,123,__LINE__, 0x40133c42, 0x12000000, 0x3fe80000, 0x0000000d, 0x40130000, 0x00000002},			/* 4.80884=f(0.75000, v4.75000)*/
-{ 1, 0,123,__LINE__, 0x401347fa, 0x56464900, 0x3fe851eb, 0x851eb85f, 0x40130a3d, 0x70a3d70c},			/* 4.82029=f(0.76000, v4.76000)*/
-{ 1, 0,123,__LINE__, 0x401353b6, 0x04dd09c0, 0x3fe8a3d7, 0x0a3d70b1, 0x4013147a, 0xe147ae16},			/* 4.83174=f(0.77000, v4.77000)*/
-{ 1, 0,123,__LINE__, 0x40135f75, 0xae6d1d40, 0x3fe8f5c2, 0x8f5c2903, 0x40131eb8, 0x51eb8520},			/* 4.84322=f(0.78000, v4.78000)*/
-{ 1, 0,123,__LINE__, 0x40136b38, 0xefa53a00, 0x3fe947ae, 0x147ae155, 0x401328f5, 0xc28f5c2b},			/* 4.85470=f(0.79000, v4.79000)*/
-{ 1, 0,123,__LINE__, 0x401376ff, 0xc02d3300, 0x3fe99999, 0x999999a7, 0x40133333, 0x33333335},			/* 4.86621=f(0.80000, v4.80000)*/
-{ 1, 0,123,__LINE__, 0x401382ca, 0x2f39d6c0, 0x3fe9eb85, 0x1eb851f9, 0x40133d70, 0xa3d70a3f},			/* 4.87772=f(0.81000, v4.81000)*/
-{ 1, 0,123,__LINE__, 0x40138e98, 0x814917c0, 0x3fea3d70, 0xa3d70a4b, 0x401347ae, 0x147ae149},			/* 4.88925=f(0.82000, v4.82000)*/
-{ 1, 0,123,__LINE__, 0x40139a6a, 0x2bc3d400, 0x3fea8f5c, 0x28f5c29d, 0x401351eb, 0x851eb854},			/* 4.90079=f(0.83000, v4.83000)*/
-{ 1, 0,123,__LINE__, 0x4013a63f, 0x996ede00, 0x3feae147, 0xae147aef, 0x40135c28, 0xf5c28f5e},			/* 4.91235=f(0.84000, v4.84000)*/
-{ 1, 0,123,__LINE__, 0x4013b218, 0x65e70740, 0x3feb3333, 0x33333341, 0x40136666, 0x66666668},			/* 4.92392=f(0.85000, v4.85000)*/
-{ 1, 0,123,__LINE__, 0x4013bdf4, 0xd5425b00, 0x3feb851e, 0xb851eb93, 0x401370a3, 0xd70a3d72},			/* 4.93550=f(0.86000, v4.86000)*/
-{ 1, 0,123,__LINE__, 0x4013c9d4, 0xa9a36f00, 0x3febd70a, 0x3d70a3e5, 0x40137ae1, 0x47ae147d},			/* 4.94710=f(0.87000, v4.87000)*/
-{ 1, 0,123,__LINE__, 0x4013d5b8, 0x001fb600, 0x3fec28f5, 0xc28f5c37, 0x4013851e, 0xb851eb87},			/* 4.95871=f(0.88000, v4.88000)*/
-{ 1, 0,123,__LINE__, 0x4013e19e, 0xc1b15bc0, 0x3fec7ae1, 0x47ae1489, 0x40138f5c, 0x28f5c291},			/* 4.97033=f(0.89000, v4.89000)*/
-{ 1, 0,123,__LINE__, 0x4013ed88, 0xe41b6840, 0x3feccccc, 0xccccccdb, 0x40139999, 0x9999999b},			/* 4.98196=f(0.90000, v4.90000)*/
-{ 1, 0,123,__LINE__, 0x4013f976, 0x77817000, 0x3fed1eb8, 0x51eb852d, 0x4013a3d7, 0x0a3d70a6},			/* 4.99361=f(0.91000, v4.91000)*/
-{ 1, 0,123,__LINE__, 0x40140567, 0x715e6600, 0x3fed70a3, 0xd70a3d7f, 0x4013ae14, 0x7ae147b0},			/* 5.00527=f(0.92000, v4.92000)*/
-{ 1, 0,123,__LINE__, 0x4014115b, 0x933ca040, 0x3fedc28f, 0x5c28f5d1, 0x4013b851, 0xeb851eba},			/* 5.01695=f(0.93000, v4.93000)*/
-{ 1, 0,123,__LINE__, 0x40141d53, 0x48638f00, 0x3fee147a, 0xe147ae23, 0x4013c28f, 0x5c28f5c4},			/* 5.02863=f(0.94000, v4.94000)*/
-{ 1, 0,123,__LINE__, 0x4014294e, 0x2af76600, 0x3fee6666, 0x66666675, 0x4013cccc, 0xcccccccf},			/* 5.04033=f(0.95000, v4.95000)*/
-{ 1, 0,123,__LINE__, 0x4014354c, 0x57166700, 0x3feeb851, 0xeb851ec7, 0x4013d70a, 0x3d70a3d9},			/* 5.05204=f(0.96000, v4.96000)*/
-{ 1, 0,123,__LINE__, 0x4014414d, 0xb5bbfdc0, 0x3fef0a3d, 0x70a3d719, 0x4013e147, 0xae147ae3},			/* 5.06377=f(0.97000, v4.97000)*/
-{ 1, 0,123,__LINE__, 0x40144d52, 0x62e79080, 0x3fef5c28, 0xf5c28f6b, 0x4013eb85, 0x1eb851ed},			/* 5.07551=f(0.98000, v4.98000)*/
-{ 1, 0,123,__LINE__, 0x4014595a, 0x47b35c00, 0x3fefae14, 0x7ae147bd, 0x4013f5c2, 0x8f5c28f8},			/* 5.08725=f(0.99000, v4.99000)*/
-{ 1, 0,123,__LINE__, 0x40146565, 0x58000000, 0x3ff00000, 0x00000007, 0x40140000, 0x00000002},			/* 5.09902=f(1.00000, v5.00000)*/
-{ 1, 0,123,__LINE__, 0x40147173, 0x9d6dd400, 0x3ff028f5, 0xc28f5c30, 0x40140a3d, 0x70a3d70c},			/* 5.11079=f(1.01000, v5.01000)*/
-{ 1, 0,123,__LINE__, 0x40147d84, 0xf9bbdd40, 0x3ff051eb, 0x851eb859, 0x4014147a, 0xe147ae16},			/* 5.12257=f(1.02000, v5.02000)*/
-{ 1, 0,123,__LINE__, 0x40148999, 0x885f4640, 0x3ff07ae1, 0x47ae1482, 0x40141eb8, 0x51eb8520},			/* 5.13437=f(1.03000, v5.03000)*/
-{ 1, 0,123,__LINE__, 0x401495b1, 0x0a2fa200, 0x3ff0a3d7, 0x0a3d70ab, 0x401428f5, 0xc28f5c2b},			/* 5.14618=f(1.04000, v5.04000)*/
-{ 1, 0,123,__LINE__, 0x4014a1cb, 0xc2ac7b00, 0x3ff0cccc, 0xccccccd4, 0x40143333, 0x33333335},			/* 5.15800=f(1.05000, v5.05000)*/
-{ 1, 0,123,__LINE__, 0x4014ade9, 0x4a281a00, 0x3ff0f5c2, 0x8f5c28fd, 0x40143d70, 0xa3d70a3f},			/* 5.16983=f(1.06000, v5.06000)*/
-{ 1, 0,123,__LINE__, 0x4014ba0a, 0x350dc300, 0x3ff11eb8, 0x51eb8526, 0x401447ae, 0x147ae14a},			/* 5.18168=f(1.07000, v5.07000)*/
-{ 1, 0,123,__LINE__, 0x4014c62d, 0xca721100, 0x3ff147ae, 0x147ae14f, 0x401451eb, 0x851eb854},			/* 5.19353=f(1.08000, v5.08000)*/
-{ 1, 0,123,__LINE__, 0x4014d254, 0xc7979800, 0x3ff170a3, 0xd70a3d78, 0x40145c28, 0xf5c28f5e},			/* 5.20540=f(1.09000, v5.09000)*/
-{ 1, 0,123,__LINE__, 0x4014de7e, 0x730d8600, 0x3ff19999, 0x999999a1, 0x40146666, 0x66666668},			/* 5.21727=f(1.10000, v5.10000)*/
-{ 1, 0,123,__LINE__, 0x4014eaab, 0x0ff80d40, 0x3ff1c28f, 0x5c28f5ca, 0x401470a3, 0xd70a3d72},			/* 5.22916=f(1.11000, v5.11000)*/
-{ 1, 0,123,__LINE__, 0x4014f6da, 0xb0755980, 0x3ff1eb85, 0x1eb851f3, 0x40147ae1, 0x47ae147d},			/* 5.24106=f(1.12000, v5.12000)*/
-{ 1, 0,123,__LINE__, 0x4015030d, 0x461aa700, 0x3ff2147a, 0xe147ae1c, 0x4014851e, 0xb851eb87},			/* 5.25298=f(1.13000, v5.13000)*/
-{ 1, 0,123,__LINE__, 0x40150f42, 0x910ff100, 0x3ff23d70, 0xa3d70a45, 0x40148f5c, 0x28f5c291},			/* 5.26490=f(1.14000, v5.14000)*/
-{ 1, 0,123,__LINE__, 0x40151b7a, 0xfdc1f380, 0x3ff26666, 0x6666666e, 0x40149999, 0x9999999c},			/* 5.27683=f(1.15000, v5.15000)*/
-{ 1, 0,123,__LINE__, 0x401527b5, 0xf9fc0400, 0x3ff28f5c, 0x28f5c297, 0x4014a3d7, 0x0a3d70a6},			/* 5.28878=f(1.16000, v5.16000)*/
-{ 1, 0,123,__LINE__, 0x401533f4, 0x1b7d4e00, 0x3ff2b851, 0xeb851ec0, 0x4014ae14, 0x7ae147b0},			/* 5.30073=f(1.17000, v5.17000)*/
-{ 1, 0,123,__LINE__, 0x40154034, 0xcfb47300, 0x3ff2e147, 0xae147ae9, 0x4014b851, 0xeb851eba},			/* 5.31270=f(1.18000, v5.18000)*/
-{ 1, 0,123,__LINE__, 0x40154c78, 0x83383ac0, 0x3ff30a3d, 0x70a3d712, 0x4014c28f, 0x5c28f5c4},			/* 5.32467=f(1.19000, v5.19000)*/
-{14, 0,123,__LINE__, 0x401abd9a, 0x49389a80, 0xc01921fb, 0x54442d18, 0xc00243f6, 0xa8885a30},			/* 6.68515=f(-6.28318, v-2.28318)*/
-{15, 0,123,__LINE__, 0x40131050, 0x7f74c900, 0xc012d97c, 0x7f3321d2, 0xbfe6cbe3, 0xf9990e90},			/* 4.76593=f(-4.71238, v-0.71238)*/
-{14, 0,123,__LINE__, 0x400a0dd6, 0xd2f0cc80, 0xc00921fb, 0x54442d18, 0x3feb7812, 0xaeef4ba0},			/* 3.25675=f(-3.14159, v0.85840)*/
-{ 1, 0,123,__LINE__, 0x40072481, 0x0e8dde80, 0xbff921fb, 0x54442d18, 0x40036f02, 0x55dde974},			/* 2.89282=f(-1.57079, v2.42920)*/
-{ 1, 0,123,__LINE__, 0x40100000, 0x00000000, 0x00000000, 0x00000000, 0x40100000, 0x00000000},			/* 4.00000=f(0.00000, v4.00000)*/
-{ 1, 0,123,__LINE__, 0x401726ee, 0xafb01b40, 0x3ff921fb, 0x54442d18, 0x4016487e, 0xd5110b46},			/* 5.78802=f(1.57079, v5.57079)*/
-{11, 0,123,__LINE__, 0x401f354b, 0xebeba9c0, 0x400921fb, 0x54442d18, 0x401c90fd, 0xaa22168c},			/* 7.80204=f(3.14159, v7.14159)*/
-{10, 0,123,__LINE__, 0x4023cf71, 0xfc8d8900, 0x4012d97c, 0x7f3321d2, 0x40216cbe, 0x3f9990e9},			/* 9.90516=f(4.71238, v8.71238)*/
-{ 9, 0,123,__LINE__, 0x4043d974, 0x80000000, 0xc03e0000, 0x00000000, 0xc03a0000, 0x00000000},			/* 39.6988=f(-30.0000, v-26.0000)*/
-{ 9, 0,123,__LINE__, 0x4042a68d, 0xebdd48c0, 0xc03c4ccc, 0xcccccccd, 0xc0384ccc, 0xcccccccd},			/* 37.3012=f(-28.3000, v-24.3000)*/
-{ 9, 0,123,__LINE__, 0x404173c4, 0xafcc8d40, 0xc03a9999, 0x9999999a, 0xc0369999, 0x9999999a},			/* 34.9044=f(-26.6000, v-22.6000)*/
-{ 9, 0,123,__LINE__, 0x4040411f, 0x45d27980, 0xc038e666, 0x66666667, 0xc034e666, 0x66666667},			/* 32.5087=f(-24.9000, v-20.9000)*/
-{12, 0,123,__LINE__, 0x403e1d4c, 0x909d6800, 0xc0373333, 0x33333334, 0xc0333333, 0x33333334},			/* 30.1144=f(-23.2000, v-19.2000)*/
-{12, 0,123,__LINE__, 0x403bb8ca, 0x0d000000, 0xc0358000, 0x00000001, 0xc0318000, 0x00000001},			/* 27.7218=f(-21.5000, v-17.5000)*/
-{12, 0,123,__LINE__, 0x403954d6, 0xded2fb00, 0xc033cccc, 0xccccccce, 0xc02f9999, 0x9999999c},			/* 25.3314=f(-19.8000, v-15.8000)*/
-{13, 0,123,__LINE__, 0x4036f19f, 0xea834300, 0xc0321999, 0x9999999b, 0xc02c3333, 0x33333336},			/* 22.9438=f(-18.1000, v-14.1000)*/
-{13, 0,123,__LINE__, 0x40348f66, 0x5ff9fd80, 0xc0306666, 0x66666668, 0xc028cccc, 0xccccccd0},			/* 20.5601=f(-16.4000, v-12.4000)*/
-{11, 0,123,__LINE__, 0x40322e8e, 0x5da45d00, 0xc02d6666, 0x6666666a, 0xc0256666, 0x6666666a},			/* 18.1818=f(-14.7000, v-10.7000)*/
-{13, 0,123,__LINE__, 0x402f9f6e, 0x58000000, 0xc02a0000, 0x00000004, 0xc0220000, 0x00000004},			/* 15.8113=f(-13.0000, v-9.00000)*/
-{12, 0,123,__LINE__, 0x402ae7df, 0xfe6b5940, 0xc0269999, 0x9999999e, 0xc01d3333, 0x3333333c},			/* 13.4528=f(-11.3000, v-7.30000)*/
-{13, 0,123,__LINE__, 0x40263a58, 0x5b9e5d00, 0xc0233333, 0x33333338, 0xc0166666, 0x66666670},			/* 11.1139=f(-9.60000, v-5.60000)*/
-{10, 0,123,__LINE__, 0x40219ed5, 0x612b2fc0, 0xc01f9999, 0x999999a3, 0xc00f3333, 0x33333346},			/* 8.81022=f(-7.90000, v-3.90000)*/
-{14, 0,123,__LINE__, 0x401a50a4, 0xb59e3900, 0xc018cccc, 0xccccccd6, 0xc0019999, 0x999999ac},			/* 6.57875=f(-6.20000, v-2.20000)*/
-{19, 0,123,__LINE__, 0x40121c5b, 0x7c000000, 0xc0120000, 0x00000009, 0xbfe00000, 0x00000048},			/* 4.52769=f(-4.50000, v-0.50000)*/
-{12, 0,123,__LINE__, 0x40085ed7, 0x6c3cac80, 0xc0066666, 0x66666678, 0x3ff33333, 0x33333310},			/* 3.04630=f(-2.80000, v1.20000)*/
-{ 1, 0,123,__LINE__, 0x4008d01a, 0x427d6880, 0xbff19999, 0x999999bd, 0x40073333, 0x33333322},			/* 3.10161=f(-1.10000, v2.90000)*/
-{ 1, 0,123,__LINE__, 0x40128e4c, 0xf6588580, 0x3fe33333, 0x333332ec, 0x40126666, 0x6666665e},			/* 4.63896=f(0.60000, v4.60000)*/
-{11, 0,123,__LINE__, 0x401ad3ac, 0x8406be00, 0x40026666, 0x66666654, 0x40193333, 0x3333332a},			/* 6.70671=f(2.30000, v6.30000)*/
-{10, 0,123,__LINE__, 0x4021e377, 0xa0000000, 0x400fffff, 0xffffffee, 0x401fffff, 0xfffffff7},			/* 8.94427=f(4.00000, v8.00000)*/
-{10, 0,123,__LINE__, 0x40268065, 0xdefa1000, 0x4016cccc, 0xccccccc4, 0x40236666, 0x66666662},			/* 11.2507=f(5.70000, v9.70000)*/
-{10, 0,123,__LINE__, 0x402b2eae, 0x5d8a2c00, 0x401d9999, 0x99999991, 0x4026cccc, 0xccccccc8},			/* 13.5911=f(7.40000, v11.4000)*/
-{12, 0,123,__LINE__, 0x402fe6ae, 0x6862a100, 0x40223333, 0x3333332f, 0x402a3333, 0x3333332f},			/* 15.9505=f(9.10000, v13.1000)*/
-{11, 0,123,__LINE__, 0x40325252, 0x832952e0, 0x40259999, 0x99999995, 0x402d9999, 0x99999995},			/* 18.3215=f(10.8000, v14.8000)*/
-{11, 0,123,__LINE__, 0x4034b343, 0x0d000000, 0x4028ffff, 0xfffffffb, 0x40307fff, 0xfffffffe},			/* 20.7002=f(12.5000, v16.5000)*/
-{11, 0,123,__LINE__, 0x4037158d, 0xc5d5c500, 0x402c6666, 0x66666661, 0x40323333, 0x33333330},			/* 23.0841=f(14.2000, v18.2000)*/
-{11, 0,123,__LINE__, 0x403978d1, 0x58ceda40, 0x402fcccc, 0xccccccc7, 0x4033e666, 0x66666664},			/* 25.4719=f(15.9000, v19.9000)*/
-{12, 0,123,__LINE__, 0x403bdcce, 0x0d0e3940, 0x40319999, 0x99999997, 0x40359999, 0x99999997},			/* 27.8625=f(17.6000, v21.6000)*/
-{12, 0,123,__LINE__, 0x403e4157, 0xba2dd900, 0x40334ccc, 0xccccccca, 0x40374ccc, 0xccccccca},			/* 30.2552=f(19.3000, v23.3000)*/
-{ 9, 0,123,__LINE__, 0x40405327, 0xde000000, 0x4034ffff, 0xfffffffd, 0x4038ffff, 0xfffffffd},			/* 32.6496=f(21.0000, v25.0000)*/
-{ 9, 0,123,__LINE__, 0x404185cf, 0xa899b380, 0x4036b333, 0x33333330, 0x403ab333, 0x33333330},			/* 35.0453=f(22.7000, v26.7000)*/
-{ 9, 0,123,__LINE__, 0x4042b89a, 0xb82e6060, 0x40386666, 0x66666663, 0x403c6666, 0x66666663},			/* 37.4422=f(24.4000, v28.4000)*/
-{ 9, 0,123,__LINE__, 0x4043eb82, 0xe06f7b40, 0x403a1999, 0x99999996, 0x403e1999, 0x99999996},			/* 39.8399=f(26.1000, v30.1000)*/
-{ 9, 0,123,__LINE__, 0x40451e82, 0xe4b2fe80, 0x403bcccc, 0xccccccc9, 0x403fcccc, 0xccccccc9},			/* 42.2383=f(27.8000, v31.8000)*/
-{ 9, 0,123,__LINE__, 0x40465197, 0x39800000, 0x403d7fff, 0xfffffffc, 0x4040bfff, 0xfffffffe},			/* 44.6374=f(29.5000, v33.5000)*/
-0,};
-test_hypotf(m)   {run_vector_1(m,hypotf_vec,(char *)(hypotf),"hypotf","fff");   }	
diff --git a/newlib/libm/test/iconv_vec.c b/newlib/libm/test/iconv_vec.c
deleted file mode 100644
index 15bf38860..000000000
--- a/newlib/libm/test/iconv_vec.c
+++ /dev/null
@@ -1,1159 +0,0 @@
-
-#include "test.h"
-
-int_type ints[]={
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0xa73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000000a7, 6,0,0x000000a7, 6,0,0x00000000, 3,0, " +0xa7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000a73, 7,0,0x00000a73, 7,0,0x00000000, 3,0, " +0xa73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000000a7, 6,0,0x000000a7, 6,0,0x00000000, 3,0, " +0xa7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0xa12413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000a1241, 9,0,0x000a1241, 9,0,0x00000000, 3,0, " +0xa1241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00a12413,10,0,0x00a12413,10,0,0x00000000, 3,0, " +0xa12413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000a1241, 9,0,0x000a1241, 9,0,0x00000000, 3,0, " +0xa1241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0xa93231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000000a9, 6,0,0x000000a9, 6,0,0x00000000, 3,0, " +0xa9w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000a93, 7,0,0x00000a93, 7,0,0x00000000, 3,0, " +0xa93",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000000a9, 6,0,0x000000a9, 6,0,0x00000000, 3,0, " +0xa9",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xa3231122,12,0,0xa3231122,12,0,0x00000000, 3,0, " +0xa3231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x0000000a, 5,0,0x0000000a, 5,0,0x00000000, 3,0, " +0xaw",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x000000a3, 6,0,0x000000a3, 6,0,0x00000000, 3,0, " +0xa3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x0000000a, 5,0,0x0000000a, 5,0,0x00000000, 3,0, " +0xa",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0x773231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000077, 6,0,0x00000077, 6,0,0x00000000, 3,0, " +0x77w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000773, 7,0,0x00000773, 7,0,0x00000000, 3,0, " +0x773",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000077, 6,0,0x00000077, 6,0,0x00000000, 3,0, " +0x77",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0x712413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00071241, 9,0,0x00071241, 9,0,0x00000000, 3,0, " +0x71241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00712413,10,0,0x00712413,10,0,0x00000000, 3,0, " +0x712413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00071241, 9,0,0x00071241, 9,0,0x00000000, 3,0, " +0x71241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x93231122,13,0,0x93231122,13,0,0x00000000, 3,0, " +0x793231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000079, 6,0,0x00000079, 6,0,0x00000000, 3,0, " +0x79w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000793, 7,0,0x00000793, 7,0,0x00000000, 3,0, " +0x793",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000079, 6,0,0x00000079, 6,0,0x00000000, 3,0, " +0x79",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x73231122,12,0,0x73231122,12,0,0x00000000, 3,0, " +0x73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000007, 5,0,0x00000007, 5,0,0x00000000, 3,0, " +0x7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000073, 6,0,0x00000073, 6,0,0x00000000, 3,0, " +0x73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000007, 5,0,0x00000007, 5,0,0x00000000, 3,0, " +0x7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x73231122,13,0,0x73231122,13,0,0x00000000, 3,0, " +0x373231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000037, 6,0,0x00000037, 6,0,0x00000000, 3,0, " +0x37w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000373, 7,0,0x00000373, 7,0,0x00000000, 3,0, " +0x373",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000037, 6,0,0x00000037, 6,0,0x00000000, 3,0, " +0x37",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,12,34,0x7fffffff,12,34,0x00000000, 3,0, " +0x312413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00031241, 9,0,0x00031241, 9,0,0x00000000, 3,0, " +0x31241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00312413,10,0,0x00312413,10,0,0x00000000, 3,0, " +0x312413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00031241, 9,0,0x00031241, 9,0,0x00000000, 3,0, " +0x31241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x93231122,13,0,0x93231122,13,0,0x00000000, 3,0, " +0x393231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000039, 6,0,0x00000039, 6,0,0x00000000, 3,0, " +0x39w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000393, 7,0,0x00000393, 7,0,0x00000000, 3,0, " +0x393",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000039, 6,0,0x00000039, 6,0,0x00000000, 3,0, " +0x39",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x33231122,12,0,0x33231122,12,0,0x00000000, 3,0, " +0x33231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000003, 5,0,0x00000003, 5,0,0x00000000, 3,0, " +0x3w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000033, 6,0,0x00000033, 6,0,0x00000000, 3,0, " +0x33",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000003, 5,0,0x00000003, 5,0,0x00000000, 3,0, " +0x3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x73231122,13,0,0x73231122,13,0,0x00000000, 3,0, " +0x173231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000017, 6,0,0x00000017, 6,0,0x00000000, 3,0, " +0x17w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000173, 7,0,0x00000173, 7,0,0x00000000, 3,0, " +0x173",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000017, 6,0,0x00000017, 6,0,0x00000000, 3,0, " +0x17",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x7fffffff,15,34,0x7fffffff,15,34,0x00000000, 3,0, " +0x112413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00011241, 9,0,0x00011241, 9,0,0x00000000, 3,0, " +0x11241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00112413,10,0,0x00112413,10,0,0x00000000, 3,0, " +0x112413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00011241, 9,0,0x00011241, 9,0,0x00000000, 3,0, " +0x11241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x93231122,13,0,0x93231122,13,0,0x00000000, 3,0, " +0x193231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000019, 6,0,0x00000019, 6,0,0x00000000, 3,0, " +0x19w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000193, 7,0,0x00000193, 7,0,0x00000000, 3,0, " +0x193",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000019, 6,0,0x00000019, 6,0,0x00000000, 3,0, " +0x19",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x13231122,12,0,0x13231122,12,0,0x00000000, 3,0, " +0x13231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000001, 5,0,0x00000001, 5,0,0x00000000, 3,0, " +0x1w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000013, 6,0,0x00000013, 6,0,0x00000000, 3,0, " +0x13",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000001, 5,0,0x00000001, 5,0,0x00000000, 3,0, " +0x1",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34, " +0a73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 5,0, " +0a7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b21, 6,0, " +0a73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 5,0, " +0a7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,11,34, " +0a12413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 8,0, " +0a1241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x071c814d, 9,0, " +0a12413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 8,0, " +0a1241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34, " +0a93231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 5,0, " +0a9w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b55, 6,0, " +0a93",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 5,0, " +0a9",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xec11cdb2,11,0, " +0a3231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 4,0, " +0aw",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x00000107, 5,0, " +0a3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 4,0, " +0a",
-__LINE__,0x07ed3252,12,0,0x2e169212,12,0,0x07ed3252,12,0,0x07ed3252,12,0,0xa94f9d32,12,0, " +0773231122",
-__LINE__,0x0000003f, 5,0,0x0000004d, 5,0,0x0000003f, 5,0,0x0000003f, 5,0,0x000000bd, 5,0, " +077w",
-__LINE__,0x000001fb, 6,0,0x00000305, 6,0,0x000001fb, 6,0,0x000001fb, 6,0,0x00001335, 6,0, " +0773",
-__LINE__,0x0000003f, 5,0,0x0000004d, 5,0,0x0000003f, 5,0,0x0000003f, 5,0,0x000000bd, 5,0, " +077",
-__LINE__,0x7fffffff,14,34,0x7fffffff,13,34,0x7fffffff,14,34,0x7fffffff,14,34,0x7fffffff,10,34, " +0712413231122",
-__LINE__,0x000072a1, 8,0,0x00011649, 8,0,0x000072a1, 8,0,0x000072a1, 8,0,0x003119c9, 8,0, " +071241w",
-__LINE__,0x0003950b, 9,0,0x000adedd, 9,0,0x0003950b, 9,0,0x0003950b, 9,0,0x04fc9e6d, 9,0, " +0712413",
-__LINE__,0x000072a1, 8,0,0x00011649, 8,0,0x000072a1, 8,0,0x000072a1, 8,0,0x003119c9, 8,0, " +071241",
-__LINE__,0x00000007, 4,0,0x2f47bf12,12,0,0x00000007, 4,0,0x00000007, 4,0,0x7fffffff,11,34, " +0793231122",
-__LINE__,0x00000007, 4,0,0x0000004f, 5,0,0x00000007, 4,0,0x00000007, 4,0,0x000000bf, 5,0, " +079w",
-__LINE__,0x00000007, 4,0,0x00000319, 6,0,0x00000007, 4,0,0x00000007, 4,0,0x00001369, 6,0, " +0793",
-__LINE__,0x00000007, 4,0,0x0000004f, 5,0,0x00000007, 4,0,0x00000007, 4,0,0x000000bf, 5,0, " +079",
-__LINE__,0x00ed3252,11,0,0x045d6b12,11,0,0x00ed3252,11,0,0x00ed3252,11,0,0x7fffffff,10,34, " +073231122",
-__LINE__,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0, " +07w",
-__LINE__,0x0000003b, 5,0,0x00000049, 5,0,0x0000003b, 5,0,0x0000003b, 5,0,0x000000b9, 5,0, " +073",
-__LINE__,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0,0x00000007, 4,0, " +07",
-__LINE__,0x03ed3252,12,0,0x163f0e12,12,0,0x03ed3252,12,0,0x03ed3252,12,0,0x7fffffff,10,34, " +0373231122",
-__LINE__,0x0000001f, 5,0,0x00000025, 5,0,0x0000001f, 5,0,0x0000001f, 5,0,0x00000055, 5,0, " +037w",
-__LINE__,0x000000fb, 6,0,0x00000175, 6,0,0x000000fb, 6,0,0x000000fb, 6,0,0x000008a5, 6,0, " +0373",
-__LINE__,0x0000001f, 5,0,0x00000025, 5,0,0x0000001f, 5,0,0x0000001f, 5,0,0x00000055, 5,0, " +037",
-__LINE__,0x7fffffff,14,34,0x7fffffff,13,34,0x7fffffff,14,34,0x7fffffff,14,34,0x7fffffff,12,34, " +0312413231122",
-__LINE__,0x000032a1, 8,0,0x00007a09, 8,0,0x000032a1, 8,0,0x000032a1, 8,0,0x00153589, 8,0, " +031241w",
-__LINE__,0x0001950b, 9,0,0x0004c45d, 9,0,0x0001950b, 9,0,0x0001950b, 9,0,0x02276fed, 9,0, " +0312413",
-__LINE__,0x000032a1, 8,0,0x00007a09, 8,0,0x000032a1, 8,0,0x000032a1, 8,0,0x00153589, 8,0, " +031241",
-__LINE__,0x00000003, 4,0,0x17703b12,12,0,0x00000003, 4,0,0x00000003, 4,0,0xea867e32,12,0, " +0393231122",
-__LINE__,0x00000003, 4,0,0x00000027, 5,0,0x00000003, 4,0,0x00000003, 4,0,0x00000057, 5,0, " +039w",
-__LINE__,0x00000003, 4,0,0x00000189, 6,0,0x00000003, 4,0,0x00000003, 4,0,0x000008d9, 6,0, " +0393",
-__LINE__,0x00000003, 4,0,0x00000027, 5,0,0x00000003, 4,0,0x00000003, 4,0,0x00000057, 5,0, " +039",
-__LINE__,0x006d3252,11,0,0x01fb1112,11,0,0x006d3252,11,0,0x006d3252,11,0,0xd4efec32,11,0, " +033231122",
-__LINE__,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0, " +03w",
-__LINE__,0x0000001b, 5,0,0x00000021, 5,0,0x0000001b, 5,0,0x0000001b, 5,0,0x00000051, 5,0, " +033",
-__LINE__,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0,0x00000003, 4,0, " +03",
-__LINE__,0x01ed3252,12,0,0x0a534c12,12,0,0x01ed3252,12,0,0x01ed3252,12,0,0xeeeed732,12,0, " +0173231122",
-__LINE__,0x0000000f, 5,0,0x00000011, 5,0,0x0000000f, 5,0,0x0000000f, 5,0,0x00000021, 5,0, " +017w",
-__LINE__,0x0000007b, 6,0,0x000000ad, 6,0,0x0000007b, 6,0,0x0000007b, 6,0,0x0000035d, 6,0, " +0173",
-__LINE__,0x0000000f, 5,0,0x00000011, 5,0,0x0000000f, 5,0,0x0000000f, 5,0,0x00000021, 5,0, " +017",
-__LINE__,0x542d3252,15,0,0x7fffffff,14,34,0x542d3252,15,0,0x542d3252,15,0,0x7fffffff,11,34, " +0112413231122",
-__LINE__,0x000012a1, 8,0,0x00002be9, 8,0,0x000012a1, 8,0,0x000012a1, 8,0,0x00074369, 8,0, " +011241w",
-__LINE__,0x0000950b, 9,0,0x0001b71d, 9,0,0x0000950b, 9,0,0x0000950b, 9,0,0x00bcd8ad, 9,0, " +0112413",
-__LINE__,0x000012a1, 8,0,0x00002be9, 8,0,0x000012a1, 8,0,0x000012a1, 8,0,0x00074369, 8,0, " +011241",
-__LINE__,0x00000001, 4,0,0x0b847912,12,0,0x00000001, 4,0,0x00000001, 4,0,0xac663c32,12,0, " +0193231122",
-__LINE__,0x00000001, 4,0,0x00000013, 5,0,0x00000001, 4,0,0x00000001, 4,0,0x00000023, 5,0, " +019w",
-__LINE__,0x00000001, 4,0,0x000000c1, 6,0,0x00000001, 4,0,0x00000001, 4,0,0x00000391, 6,0, " +0193",
-__LINE__,0x00000001, 4,0,0x00000013, 5,0,0x00000001, 4,0,0x00000001, 4,0,0x00000023, 5,0, " +019",
-__LINE__,0x002d3252,11,0,0x00c9e412,11,0,0x002d3252,11,0,0x002d3252,11,0,0x17788732,11,0, " +013231122",
-__LINE__,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0, " +01w",
-__LINE__,0x0000000b, 5,0,0x0000000d, 5,0,0x0000000b, 5,0,0x0000000b, 5,0,0x0000001d, 5,0, " +013",
-__LINE__,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0,0x00000001, 4,0, " +01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34,0x00000000, 0,0,0x7fffffff, 9,34, " +a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 4,0,0x00000000, 0,0,0x0000010b, 4,0, " +a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a73, 5,0,0x00000000, 0,0,0x00001b21, 5,0, " +a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 4,0,0x00000000, 0,0,0x0000010b, 4,0, " +a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34,0x00000000, 0,0,0x7fffffff,10,34, " +a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 7,0,0x00000000, 0,0,0x004604f9, 7,0, " +a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00a12413, 8,0,0x00000000, 0,0,0x071c814d, 8,0, " +a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 7,0,0x00000000, 0,0,0x004604f9, 7,0, " +a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34,0x00000000, 0,0,0x7fffffff, 9,34, " +a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 4,0,0x00000000, 0,0,0x0000010d, 4,0, " +a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a93, 5,0,0x00000000, 0,0,0x00001b55, 5,0, " +a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 4,0,0x00000000, 0,0,0x0000010d, 4,0, " +a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xa3231122,10,0,0x00000000, 0,0,0xec11cdb2,10,0, " +a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0,0x00000000, 0,0,0x0000000a, 3,0, " +aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a3, 4,0,0x00000000, 0,0,0x00000107, 4,0, " +a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0,0x00000000, 0,0,0x0000000a, 3,0, " +a",
-__LINE__,0x07ed3252,11,0,0x2e169212,11,0,0x7fffffff,10,34,0x2e169212,11,0,0xa94f9d32,11,0, " +773231122",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x00000077, 4,0,0x0000004d, 4,0,0x000000bd, 4,0, " +77w",
-__LINE__,0x000001fb, 5,0,0x00000305, 5,0,0x00000773, 5,0,0x00000305, 5,0,0x00001335, 5,0, " +773",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x00000077, 4,0,0x0000004d, 4,0,0x000000bd, 4,0, " +77",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,10,34,0x7fffffff,12,34,0x7fffffff, 9,34, " +712413231122",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x00071241, 7,0,0x00011649, 7,0,0x003119c9, 7,0, " +71241w",
-__LINE__,0x0003950b, 8,0,0x000adedd, 8,0,0x00712413, 8,0,0x000adedd, 8,0,0x04fc9e6d, 8,0, " +712413",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x00071241, 7,0,0x00011649, 7,0,0x003119c9, 7,0, " +71241",
-__LINE__,0x00000007, 3,0,0x2f47bf12,11,0,0x93231122,11,0,0x2f47bf12,11,0,0x7fffffff,10,34, " +793231122",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000079, 4,0,0x0000004f, 4,0,0x000000bf, 4,0, " +79w",
-__LINE__,0x00000007, 3,0,0x00000319, 5,0,0x00000793, 5,0,0x00000319, 5,0,0x00001369, 5,0, " +793",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000079, 4,0,0x0000004f, 4,0,0x000000bf, 4,0, " +79",
-__LINE__,0x00ed3252,10,0,0x045d6b12,10,0,0x73231122,10,0,0x045d6b12,10,0,0x7fffffff, 9,34, " +73231122",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, " +7w",
-__LINE__,0x0000003b, 4,0,0x00000049, 4,0,0x00000073, 4,0,0x00000049, 4,0,0x000000b9, 4,0, " +73",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, " +7",
-__LINE__,0x03ed3252,11,0,0x163f0e12,11,0,0x73231122,11,0,0x163f0e12,11,0,0x7fffffff, 9,34, " +373231122",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x00000037, 4,0,0x00000025, 4,0,0x00000055, 4,0, " +37w",
-__LINE__,0x000000fb, 5,0,0x00000175, 5,0,0x00000373, 5,0,0x00000175, 5,0,0x000008a5, 5,0, " +373",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x00000037, 4,0,0x00000025, 4,0,0x00000055, 4,0, " +37",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,10,34,0x7fffffff,12,34,0x7fffffff,11,34, " +312413231122",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x00031241, 7,0,0x00007a09, 7,0,0x00153589, 7,0, " +31241w",
-__LINE__,0x0001950b, 8,0,0x0004c45d, 8,0,0x00312413, 8,0,0x0004c45d, 8,0,0x02276fed, 8,0, " +312413",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x00031241, 7,0,0x00007a09, 7,0,0x00153589, 7,0, " +31241",
-__LINE__,0x00000003, 3,0,0x17703b12,11,0,0x93231122,11,0,0x17703b12,11,0,0xea867e32,11,0, " +393231122",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000039, 4,0,0x00000027, 4,0,0x00000057, 4,0, " +39w",
-__LINE__,0x00000003, 3,0,0x00000189, 5,0,0x00000393, 5,0,0x00000189, 5,0,0x000008d9, 5,0, " +393",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000039, 4,0,0x00000027, 4,0,0x00000057, 4,0, " +39",
-__LINE__,0x006d3252,10,0,0x01fb1112,10,0,0x33231122,10,0,0x01fb1112,10,0,0xd4efec32,10,0, " +33231122",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, " +3w",
-__LINE__,0x0000001b, 4,0,0x00000021, 4,0,0x00000033, 4,0,0x00000021, 4,0,0x00000051, 4,0, " +33",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, " +3",
-__LINE__,0x01ed3252,11,0,0x0a534c12,11,0,0x73231122,11,0,0x0a534c12,11,0,0xeeeed732,11,0, " +173231122",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x00000017, 4,0,0x00000011, 4,0,0x00000021, 4,0, " +17w",
-__LINE__,0x0000007b, 5,0,0x000000ad, 5,0,0x00000173, 5,0,0x000000ad, 5,0,0x0000035d, 5,0, " +173",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x00000017, 4,0,0x00000011, 4,0,0x00000021, 4,0, " +17",
-__LINE__,0x542d3252,14,0,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff,10,34, " +112413231122",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x00011241, 7,0,0x00002be9, 7,0,0x00074369, 7,0, " +11241w",
-__LINE__,0x0000950b, 8,0,0x0001b71d, 8,0,0x00112413, 8,0,0x0001b71d, 8,0,0x00bcd8ad, 8,0, " +112413",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x00011241, 7,0,0x00002be9, 7,0,0x00074369, 7,0, " +11241",
-__LINE__,0x00000001, 3,0,0x0b847912,11,0,0x93231122,11,0,0x0b847912,11,0,0xac663c32,11,0, " +193231122",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000019, 4,0,0x00000013, 4,0,0x00000023, 4,0, " +19w",
-__LINE__,0x00000001, 3,0,0x000000c1, 5,0,0x00000193, 5,0,0x000000c1, 5,0,0x00000391, 5,0, " +193",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000019, 4,0,0x00000013, 4,0,0x00000023, 4,0, " +19",
-__LINE__,0x002d3252,10,0,0x00c9e412,10,0,0x13231122,10,0,0x00c9e412,10,0,0x17788732,10,0, " +13231122",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, " +1w",
-__LINE__,0x0000000b, 4,0,0x0000000d, 4,0,0x00000013, 4,0,0x0000000d, 4,0,0x0000001d, 4,0, " +13",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, " +1",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0xa73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff59, 6,0,0xffffff59, 6,0,0x00000000, 3,0, " -0xa7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffff58d, 7,0,0xfffff58d, 7,0,0x00000000, 3,0, " -0xa73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff59, 6,0,0xffffff59, 6,0,0x00000000, 3,0, " -0xa7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0xa12413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfff5edbf, 9,0,0xfff5edbf, 9,0,0x00000000, 3,0, " -0xa1241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xff5edbed,10,0,0xff5edbed,10,0,0x00000000, 3,0, " -0xa12413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfff5edbf, 9,0,0xfff5edbf, 9,0,0x00000000, 3,0, " -0xa1241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0xa93231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff57, 6,0,0xffffff57, 6,0,0x00000000, 3,0, " -0xa9w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffff56d, 7,0,0xfffff56d, 7,0,0x00000000, 3,0, " -0xa93",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff57, 6,0,0xffffff57, 6,0,0x00000000, 3,0, " -0xa9",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x5cdceede,12,0,0x5cdceede,12,0,0x00000000, 3,0, " -0xa3231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffff6, 5,0,0xfffffff6, 5,0,0x00000000, 3,0, " -0xaw",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff5d, 6,0,0xffffff5d, 6,0,0x00000000, 3,0, " -0xa3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffff6, 5,0,0xfffffff6, 5,0,0x00000000, 3,0, " -0xa",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0x773231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff89, 6,0,0xffffff89, 6,0,0x00000000, 3,0, " -0x77w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffff88d, 7,0,0xfffff88d, 7,0,0x00000000, 3,0, " -0x773",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff89, 6,0,0xffffff89, 6,0,0x00000000, 3,0, " -0x77",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0x712413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfff8edbf, 9,0,0xfff8edbf, 9,0,0x00000000, 3,0, " -0x71241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xff8edbed,10,0,0xff8edbed,10,0,0x00000000, 3,0, " -0x712413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfff8edbf, 9,0,0xfff8edbf, 9,0,0x00000000, 3,0, " -0x71241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x6cdceede,13,0,0x6cdceede,13,0,0x00000000, 3,0, " -0x793231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff87, 6,0,0xffffff87, 6,0,0x00000000, 3,0, " -0x79w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffff86d, 7,0,0xfffff86d, 7,0,0x00000000, 3,0, " -0x793",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff87, 6,0,0xffffff87, 6,0,0x00000000, 3,0, " -0x79",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x8cdceede,12,0,0x8cdceede,12,0,0x00000000, 3,0, " -0x73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffff9, 5,0,0xfffffff9, 5,0,0x00000000, 3,0, " -0x7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffff8d, 6,0,0xffffff8d, 6,0,0x00000000, 3,0, " -0x73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffff9, 5,0,0xfffffff9, 5,0,0x00000000, 3,0, " -0x7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x8cdceede,13,0,0x8cdceede,13,0,0x00000000, 3,0, " -0x373231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffc9, 6,0,0xffffffc9, 6,0,0x00000000, 3,0, " -0x37w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffc8d, 7,0,0xfffffc8d, 7,0,0x00000000, 3,0, " -0x373",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffc9, 6,0,0xffffffc9, 6,0,0x00000000, 3,0, " -0x37",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,12,34,0x80000000,12,34,0x00000000, 3,0, " -0x312413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffcedbf, 9,0,0xfffcedbf, 9,0,0x00000000, 3,0, " -0x31241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffcedbed,10,0,0xffcedbed,10,0,0x00000000, 3,0, " -0x312413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffcedbf, 9,0,0xfffcedbf, 9,0,0x00000000, 3,0, " -0x31241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x6cdceede,13,0,0x6cdceede,13,0,0x00000000, 3,0, " -0x393231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffc7, 6,0,0xffffffc7, 6,0,0x00000000, 3,0, " -0x39w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffc6d, 7,0,0xfffffc6d, 7,0,0x00000000, 3,0, " -0x393",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffc7, 6,0,0xffffffc7, 6,0,0x00000000, 3,0, " -0x39",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xccdceede,12,0,0xccdceede,12,0,0x00000000, 3,0, " -0x33231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffffd, 5,0,0xfffffffd, 5,0,0x00000000, 3,0, " -0x3w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffcd, 6,0,0xffffffcd, 6,0,0x00000000, 3,0, " -0x33",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffffd, 5,0,0xfffffffd, 5,0,0x00000000, 3,0, " -0x3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x8cdceede,13,0,0x8cdceede,13,0,0x00000000, 3,0, " -0x173231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffe9, 6,0,0xffffffe9, 6,0,0x00000000, 3,0, " -0x17w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffe8d, 7,0,0xfffffe8d, 7,0,0x00000000, 3,0, " -0x173",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffe9, 6,0,0xffffffe9, 6,0,0x00000000, 3,0, " -0x17",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x80000000,15,34,0x80000000,15,34,0x00000000, 3,0, " -0x112413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffeedbf, 9,0,0xfffeedbf, 9,0,0x00000000, 3,0, " -0x11241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffeedbed,10,0,0xffeedbed,10,0,0x00000000, 3,0, " -0x112413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffeedbf, 9,0,0xfffeedbf, 9,0,0x00000000, 3,0, " -0x11241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x6cdceede,13,0,0x6cdceede,13,0,0x00000000, 3,0, " -0x193231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffe7, 6,0,0xffffffe7, 6,0,0x00000000, 3,0, " -0x19w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xfffffe6d, 7,0,0xfffffe6d, 7,0,0x00000000, 3,0, " -0x193",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffe7, 6,0,0xffffffe7, 6,0,0x00000000, 3,0, " -0x19",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xecdceede,12,0,0xecdceede,12,0,0x00000000, 3,0, " -0x13231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffff, 5,0,0xffffffff, 5,0,0x00000000, 3,0, " -0x1w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffed, 6,0,0xffffffed, 6,0,0x00000000, 3,0, " -0x13",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0xffffffff, 5,0,0xffffffff, 5,0,0x00000000, 3,0, " -0x1",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34, " -0a73231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef5, 5,0, " -0a7w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xffffe4df, 6,0, " -0a73",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef5, 5,0, " -0a7",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000,11,34, " -0a12413231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xffb9fb07, 8,0, " -0a1241w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xf8e37eb3, 9,0, " -0a12413",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xffb9fb07, 8,0, " -0a1241",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34, " -0a93231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef3, 5,0, " -0a9w",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xffffe4ab, 6,0, " -0a93",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef3, 5,0, " -0a9",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0x13ee324e,11,0, " -0a3231122",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 4,0, " -0aw",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef9, 5,0, " -0a3",
-__LINE__,0x00000000, 3,0,0x00000000, 3,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 4,0, " -0a",
-__LINE__,0xf812cdae,12,0,0xd1e96dee,12,0,0xf812cdae,12,0,0xf812cdae,12,0,0x56b062ce,12,0, " -0773231122",
-__LINE__,0xffffffc1, 5,0,0xffffffb3, 5,0,0xffffffc1, 5,0,0xffffffc1, 5,0,0xffffff43, 5,0, " -077w",
-__LINE__,0xfffffe05, 6,0,0xfffffcfb, 6,0,0xfffffe05, 6,0,0xfffffe05, 6,0,0xffffeccb, 6,0, " -0773",
-__LINE__,0xffffffc1, 5,0,0xffffffb3, 5,0,0xffffffc1, 5,0,0xffffffc1, 5,0,0xffffff43, 5,0, " -077",
-__LINE__,0x80000000,14,34,0x80000000,13,34,0x80000000,14,34,0x80000000,14,34,0x80000000,10,34, " -0712413231122",
-__LINE__,0xffff8d5f, 8,0,0xfffee9b7, 8,0,0xffff8d5f, 8,0,0xffff8d5f, 8,0,0xffcee637, 8,0, " -071241w",
-__LINE__,0xfffc6af5, 9,0,0xfff52123, 9,0,0xfffc6af5, 9,0,0xfffc6af5, 9,0,0xfb036193, 9,0, " -0712413",
-__LINE__,0xffff8d5f, 8,0,0xfffee9b7, 8,0,0xffff8d5f, 8,0,0xffff8d5f, 8,0,0xffcee637, 8,0, " -071241",
-__LINE__,0xfffffff9, 4,0,0xd0b840ee,12,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0x80000000,11,34, " -0793231122",
-__LINE__,0xfffffff9, 4,0,0xffffffb1, 5,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xffffff41, 5,0, " -079w",
-__LINE__,0xfffffff9, 4,0,0xfffffce7, 6,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xffffec97, 6,0, " -0793",
-__LINE__,0xfffffff9, 4,0,0xffffffb1, 5,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xffffff41, 5,0, " -079",
-__LINE__,0xff12cdae,11,0,0xfba294ee,11,0,0xff12cdae,11,0,0xff12cdae,11,0,0x80000000,10,34, " -073231122",
-__LINE__,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0, " -07w",
-__LINE__,0xffffffc5, 5,0,0xffffffb7, 5,0,0xffffffc5, 5,0,0xffffffc5, 5,0,0xffffff47, 5,0, " -073",
-__LINE__,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0xfffffff9, 4,0, " -07",
-__LINE__,0xfc12cdae,12,0,0xe9c0f1ee,12,0,0xfc12cdae,12,0,0xfc12cdae,12,0,0x80000000,10,34, " -0373231122",
-__LINE__,0xffffffe1, 5,0,0xffffffdb, 5,0,0xffffffe1, 5,0,0xffffffe1, 5,0,0xffffffab, 5,0, " -037w",
-__LINE__,0xffffff05, 6,0,0xfffffe8b, 6,0,0xffffff05, 6,0,0xffffff05, 6,0,0xfffff75b, 6,0, " -0373",
-__LINE__,0xffffffe1, 5,0,0xffffffdb, 5,0,0xffffffe1, 5,0,0xffffffe1, 5,0,0xffffffab, 5,0, " -037",
-__LINE__,0x80000000,14,34,0x80000000,13,34,0x80000000,14,34,0x80000000,14,34,0x80000000,12,34, " -0312413231122",
-__LINE__,0xffffcd5f, 8,0,0xffff85f7, 8,0,0xffffcd5f, 8,0,0xffffcd5f, 8,0,0xffeaca77, 8,0, " -031241w",
-__LINE__,0xfffe6af5, 9,0,0xfffb3ba3, 9,0,0xfffe6af5, 9,0,0xfffe6af5, 9,0,0xfdd89013, 9,0, " -0312413",
-__LINE__,0xffffcd5f, 8,0,0xffff85f7, 8,0,0xffffcd5f, 8,0,0xffffcd5f, 8,0,0xffeaca77, 8,0, " -031241",
-__LINE__,0xfffffffd, 4,0,0xe88fc4ee,12,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0x157981ce,12,0, " -0393231122",
-__LINE__,0xfffffffd, 4,0,0xffffffd9, 5,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xffffffa9, 5,0, " -039w",
-__LINE__,0xfffffffd, 4,0,0xfffffe77, 6,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffff727, 6,0, " -0393",
-__LINE__,0xfffffffd, 4,0,0xffffffd9, 5,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xffffffa9, 5,0, " -039",
-__LINE__,0xff92cdae,11,0,0xfe04eeee,11,0,0xff92cdae,11,0,0xff92cdae,11,0,0x2b1013ce,11,0, " -033231122",
-__LINE__,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0, " -03w",
-__LINE__,0xffffffe5, 5,0,0xffffffdf, 5,0,0xffffffe5, 5,0,0xffffffe5, 5,0,0xffffffaf, 5,0, " -033",
-__LINE__,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0xfffffffd, 4,0, " -03",
-__LINE__,0xfe12cdae,12,0,0xf5acb3ee,12,0,0xfe12cdae,12,0,0xfe12cdae,12,0,0x111128ce,12,0, " -0173231122",
-__LINE__,0xfffffff1, 5,0,0xffffffef, 5,0,0xfffffff1, 5,0,0xfffffff1, 5,0,0xffffffdf, 5,0, " -017w",
-__LINE__,0xffffff85, 6,0,0xffffff53, 6,0,0xffffff85, 6,0,0xffffff85, 6,0,0xfffffca3, 6,0, " -0173",
-__LINE__,0xfffffff1, 5,0,0xffffffef, 5,0,0xfffffff1, 5,0,0xfffffff1, 5,0,0xffffffdf, 5,0, " -017",
-__LINE__,0xabd2cdae,15,0,0x80000000,14,34,0xabd2cdae,15,0,0xabd2cdae,15,0,0x80000000,11,34, " -0112413231122",
-__LINE__,0xffffed5f, 8,0,0xffffd417, 8,0,0xffffed5f, 8,0,0xffffed5f, 8,0,0xfff8bc97, 8,0, " -011241w",
-__LINE__,0xffff6af5, 9,0,0xfffe48e3, 9,0,0xffff6af5, 9,0,0xffff6af5, 9,0,0xff432753, 9,0, " -0112413",
-__LINE__,0xffffed5f, 8,0,0xffffd417, 8,0,0xffffed5f, 8,0,0xffffed5f, 8,0,0xfff8bc97, 8,0, " -011241",
-__LINE__,0xffffffff, 4,0,0xf47b86ee,12,0,0xffffffff, 4,0,0xffffffff, 4,0,0x5399c3ce,12,0, " -0193231122",
-__LINE__,0xffffffff, 4,0,0xffffffed, 5,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffdd, 5,0, " -019w",
-__LINE__,0xffffffff, 4,0,0xffffff3f, 6,0,0xffffffff, 4,0,0xffffffff, 4,0,0xfffffc6f, 6,0, " -0193",
-__LINE__,0xffffffff, 4,0,0xffffffed, 5,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffdd, 5,0, " -019",
-__LINE__,0xffd2cdae,11,0,0xff361bee,11,0,0xffd2cdae,11,0,0xffd2cdae,11,0,0xe88778ce,11,0, " -013231122",
-__LINE__,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0, " -01w",
-__LINE__,0xfffffff5, 5,0,0xfffffff3, 5,0,0xfffffff5, 5,0,0xfffffff5, 5,0,0xffffffe3, 5,0, " -013",
-__LINE__,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0,0xffffffff, 4,0, " -01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34,0x00000000, 0,0,0x80000000, 9,34, " -a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff59, 4,0,0x00000000, 0,0,0xfffffef5, 4,0, " -a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffff58d, 5,0,0x00000000, 0,0,0xffffe4df, 5,0, " -a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff59, 4,0,0x00000000, 0,0,0xfffffef5, 4,0, " -a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34,0x00000000, 0,0,0x80000000,10,34, " -a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfff5edbf, 7,0,0x00000000, 0,0,0xffb9fb07, 7,0, " -a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xff5edbed, 8,0,0x00000000, 0,0,0xf8e37eb3, 8,0, " -a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfff5edbf, 7,0,0x00000000, 0,0,0xffb9fb07, 7,0, " -a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34,0x00000000, 0,0,0x80000000, 9,34, " -a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff57, 4,0,0x00000000, 0,0,0xfffffef3, 4,0, " -a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffff56d, 5,0,0x00000000, 0,0,0xffffe4ab, 5,0, " -a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff57, 4,0,0x00000000, 0,0,0xfffffef3, 4,0, " -a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x5cdceede,10,0,0x00000000, 0,0,0x13ee324e,10,0, " -a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 3,0,0x00000000, 0,0,0xfffffff6, 3,0, " -aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff5d, 4,0,0x00000000, 0,0,0xfffffef9, 4,0, " -a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 3,0,0x00000000, 0,0,0xfffffff6, 3,0, " -a",
-__LINE__,0xf812cdae,11,0,0xd1e96dee,11,0,0x80000000,10,34,0xd1e96dee,11,0,0x56b062ce,11,0, " -773231122",
-__LINE__,0xffffffc1, 4,0,0xffffffb3, 4,0,0xffffff89, 4,0,0xffffffb3, 4,0,0xffffff43, 4,0, " -77w",
-__LINE__,0xfffffe05, 5,0,0xfffffcfb, 5,0,0xfffff88d, 5,0,0xfffffcfb, 5,0,0xffffeccb, 5,0, " -773",
-__LINE__,0xffffffc1, 4,0,0xffffffb3, 4,0,0xffffff89, 4,0,0xffffffb3, 4,0,0xffffff43, 4,0, " -77",
-__LINE__,0x80000000,13,34,0x80000000,12,34,0x80000000,10,34,0x80000000,12,34,0x80000000, 9,34, " -712413231122",
-__LINE__,0xffff8d5f, 7,0,0xfffee9b7, 7,0,0xfff8edbf, 7,0,0xfffee9b7, 7,0,0xffcee637, 7,0, " -71241w",
-__LINE__,0xfffc6af5, 8,0,0xfff52123, 8,0,0xff8edbed, 8,0,0xfff52123, 8,0,0xfb036193, 8,0, " -712413",
-__LINE__,0xffff8d5f, 7,0,0xfffee9b7, 7,0,0xfff8edbf, 7,0,0xfffee9b7, 7,0,0xffcee637, 7,0, " -71241",
-__LINE__,0xfffffff9, 3,0,0xd0b840ee,11,0,0x6cdceede,11,0,0xd0b840ee,11,0,0x80000000,10,34, " -793231122",
-__LINE__,0xfffffff9, 3,0,0xffffffb1, 4,0,0xffffff87, 4,0,0xffffffb1, 4,0,0xffffff41, 4,0, " -79w",
-__LINE__,0xfffffff9, 3,0,0xfffffce7, 5,0,0xfffff86d, 5,0,0xfffffce7, 5,0,0xffffec97, 5,0, " -793",
-__LINE__,0xfffffff9, 3,0,0xffffffb1, 4,0,0xffffff87, 4,0,0xffffffb1, 4,0,0xffffff41, 4,0, " -79",
-__LINE__,0xff12cdae,10,0,0xfba294ee,10,0,0x8cdceede,10,0,0xfba294ee,10,0,0x80000000, 9,34, " -73231122",
-__LINE__,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0, " -7w",
-__LINE__,0xffffffc5, 4,0,0xffffffb7, 4,0,0xffffff8d, 4,0,0xffffffb7, 4,0,0xffffff47, 4,0, " -73",
-__LINE__,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0, " -7",
-__LINE__,0xfc12cdae,11,0,0xe9c0f1ee,11,0,0x8cdceede,11,0,0xe9c0f1ee,11,0,0x80000000, 9,34, " -373231122",
-__LINE__,0xffffffe1, 4,0,0xffffffdb, 4,0,0xffffffc9, 4,0,0xffffffdb, 4,0,0xffffffab, 4,0, " -37w",
-__LINE__,0xffffff05, 5,0,0xfffffe8b, 5,0,0xfffffc8d, 5,0,0xfffffe8b, 5,0,0xfffff75b, 5,0, " -373",
-__LINE__,0xffffffe1, 4,0,0xffffffdb, 4,0,0xffffffc9, 4,0,0xffffffdb, 4,0,0xffffffab, 4,0, " -37",
-__LINE__,0x80000000,13,34,0x80000000,12,34,0x80000000,10,34,0x80000000,12,34,0x80000000,11,34, " -312413231122",
-__LINE__,0xffffcd5f, 7,0,0xffff85f7, 7,0,0xfffcedbf, 7,0,0xffff85f7, 7,0,0xffeaca77, 7,0, " -31241w",
-__LINE__,0xfffe6af5, 8,0,0xfffb3ba3, 8,0,0xffcedbed, 8,0,0xfffb3ba3, 8,0,0xfdd89013, 8,0, " -312413",
-__LINE__,0xffffcd5f, 7,0,0xffff85f7, 7,0,0xfffcedbf, 7,0,0xffff85f7, 7,0,0xffeaca77, 7,0, " -31241",
-__LINE__,0xfffffffd, 3,0,0xe88fc4ee,11,0,0x6cdceede,11,0,0xe88fc4ee,11,0,0x157981ce,11,0, " -393231122",
-__LINE__,0xfffffffd, 3,0,0xffffffd9, 4,0,0xffffffc7, 4,0,0xffffffd9, 4,0,0xffffffa9, 4,0, " -39w",
-__LINE__,0xfffffffd, 3,0,0xfffffe77, 5,0,0xfffffc6d, 5,0,0xfffffe77, 5,0,0xfffff727, 5,0, " -393",
-__LINE__,0xfffffffd, 3,0,0xffffffd9, 4,0,0xffffffc7, 4,0,0xffffffd9, 4,0,0xffffffa9, 4,0, " -39",
-__LINE__,0xff92cdae,10,0,0xfe04eeee,10,0,0xccdceede,10,0,0xfe04eeee,10,0,0x2b1013ce,10,0, " -33231122",
-__LINE__,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0, " -3w",
-__LINE__,0xffffffe5, 4,0,0xffffffdf, 4,0,0xffffffcd, 4,0,0xffffffdf, 4,0,0xffffffaf, 4,0, " -33",
-__LINE__,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0, " -3",
-__LINE__,0xfe12cdae,11,0,0xf5acb3ee,11,0,0x8cdceede,11,0,0xf5acb3ee,11,0,0x111128ce,11,0, " -173231122",
-__LINE__,0xfffffff1, 4,0,0xffffffef, 4,0,0xffffffe9, 4,0,0xffffffef, 4,0,0xffffffdf, 4,0, " -17w",
-__LINE__,0xffffff85, 5,0,0xffffff53, 5,0,0xfffffe8d, 5,0,0xffffff53, 5,0,0xfffffca3, 5,0, " -173",
-__LINE__,0xfffffff1, 4,0,0xffffffef, 4,0,0xffffffe9, 4,0,0xffffffef, 4,0,0xffffffdf, 4,0, " -17",
-__LINE__,0xabd2cdae,14,0,0x80000000,13,34,0x80000000,13,34,0x80000000,13,34,0x80000000,10,34, " -112413231122",
-__LINE__,0xffffed5f, 7,0,0xffffd417, 7,0,0xfffeedbf, 7,0,0xffffd417, 7,0,0xfff8bc97, 7,0, " -11241w",
-__LINE__,0xffff6af5, 8,0,0xfffe48e3, 8,0,0xffeedbed, 8,0,0xfffe48e3, 8,0,0xff432753, 8,0, " -112413",
-__LINE__,0xffffed5f, 7,0,0xffffd417, 7,0,0xfffeedbf, 7,0,0xffffd417, 7,0,0xfff8bc97, 7,0, " -11241",
-__LINE__,0xffffffff, 3,0,0xf47b86ee,11,0,0x6cdceede,11,0,0xf47b86ee,11,0,0x5399c3ce,11,0, " -193231122",
-__LINE__,0xffffffff, 3,0,0xffffffed, 4,0,0xffffffe7, 4,0,0xffffffed, 4,0,0xffffffdd, 4,0, " -19w",
-__LINE__,0xffffffff, 3,0,0xffffff3f, 5,0,0xfffffe6d, 5,0,0xffffff3f, 5,0,0xfffffc6f, 5,0, " -193",
-__LINE__,0xffffffff, 3,0,0xffffffed, 4,0,0xffffffe7, 4,0,0xffffffed, 4,0,0xffffffdd, 4,0, " -19",
-__LINE__,0xffd2cdae,10,0,0xff361bee,10,0,0xecdceede,10,0,0xff361bee,10,0,0xe88778ce,10,0, " -13231122",
-__LINE__,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0, " -1w",
-__LINE__,0xfffffff5, 4,0,0xfffffff3, 4,0,0xffffffed, 4,0,0xfffffff3, 4,0,0xffffffe3, 4,0, " -13",
-__LINE__,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0, " -1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0xa73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a7, 5,0,0x000000a7, 5,0,0x00000000, 2,0, " 0xa7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000a73, 6,0,0x00000a73, 6,0,0x00000000, 2,0, " 0xa73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a7, 5,0,0x000000a7, 5,0,0x00000000, 2,0, " 0xa7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0xa12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000a1241, 8,0,0x000a1241, 8,0,0x00000000, 2,0, " 0xa1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00a12413, 9,0,0x00a12413, 9,0,0x00000000, 2,0, " 0xa12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000a1241, 8,0,0x000a1241, 8,0,0x00000000, 2,0, " 0xa1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0xa93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a9, 5,0,0x000000a9, 5,0,0x00000000, 2,0, " 0xa9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000a93, 6,0,0x00000a93, 6,0,0x00000000, 2,0, " 0xa93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a9, 5,0,0x000000a9, 5,0,0x00000000, 2,0, " 0xa9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xa3231122,11,0,0xa3231122,11,0,0x00000000, 2,0, " 0xa3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x0000000a, 4,0,0x0000000a, 4,0,0x00000000, 2,0, " 0xaw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a3, 5,0,0x000000a3, 5,0,0x00000000, 2,0, " 0xa3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x0000000a, 4,0,0x0000000a, 4,0,0x00000000, 2,0, " 0xa",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0x773231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000077, 5,0,0x00000077, 5,0,0x00000000, 2,0, " 0x77w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000773, 6,0,0x00000773, 6,0,0x00000000, 2,0, " 0x773",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000077, 5,0,0x00000077, 5,0,0x00000000, 2,0, " 0x77",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0x712413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00071241, 8,0,0x00071241, 8,0,0x00000000, 2,0, " 0x71241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00712413, 9,0,0x00712413, 9,0,0x00000000, 2,0, " 0x712413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00071241, 8,0,0x00071241, 8,0,0x00000000, 2,0, " 0x71241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, " 0x793231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000079, 5,0,0x00000079, 5,0,0x00000000, 2,0, " 0x79w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000793, 6,0,0x00000793, 6,0,0x00000000, 2,0, " 0x793",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000079, 5,0,0x00000079, 5,0,0x00000000, 2,0, " 0x79",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,11,0,0x73231122,11,0,0x00000000, 2,0, " 0x73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000007, 4,0,0x00000007, 4,0,0x00000000, 2,0, " 0x7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000073, 5,0,0x00000073, 5,0,0x00000000, 2,0, " 0x73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000007, 4,0,0x00000007, 4,0,0x00000000, 2,0, " 0x7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,12,0,0x73231122,12,0,0x00000000, 2,0, " 0x373231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000037, 5,0,0x00000037, 5,0,0x00000000, 2,0, " 0x37w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000373, 6,0,0x00000373, 6,0,0x00000000, 2,0, " 0x373",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000037, 5,0,0x00000037, 5,0,0x00000000, 2,0, " 0x37",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, " 0x312413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00031241, 8,0,0x00031241, 8,0,0x00000000, 2,0, " 0x31241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00312413, 9,0,0x00312413, 9,0,0x00000000, 2,0, " 0x312413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00031241, 8,0,0x00031241, 8,0,0x00000000, 2,0, " 0x31241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, " 0x393231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000039, 5,0,0x00000039, 5,0,0x00000000, 2,0, " 0x39w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000393, 6,0,0x00000393, 6,0,0x00000000, 2,0, " 0x393",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000039, 5,0,0x00000039, 5,0,0x00000000, 2,0, " 0x39",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x33231122,11,0,0x33231122,11,0,0x00000000, 2,0, " 0x33231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000003, 4,0,0x00000003, 4,0,0x00000000, 2,0, " 0x3w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000033, 5,0,0x00000033, 5,0,0x00000000, 2,0, " 0x33",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000003, 4,0,0x00000003, 4,0,0x00000000, 2,0, " 0x3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,12,0,0x73231122,12,0,0x00000000, 2,0, " 0x173231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000017, 5,0,0x00000017, 5,0,0x00000000, 2,0, " 0x17w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000173, 6,0,0x00000173, 6,0,0x00000000, 2,0, " 0x173",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000017, 5,0,0x00000017, 5,0,0x00000000, 2,0, " 0x17",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,14,34,0x7fffffff,14,34,0x00000000, 2,0, " 0x112413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00011241, 8,0,0x00011241, 8,0,0x00000000, 2,0, " 0x11241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00112413, 9,0,0x00112413, 9,0,0x00000000, 2,0, " 0x112413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00011241, 8,0,0x00011241, 8,0,0x00000000, 2,0, " 0x11241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, " 0x193231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000019, 5,0,0x00000019, 5,0,0x00000000, 2,0, " 0x19w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000193, 6,0,0x00000193, 6,0,0x00000000, 2,0, " 0x193",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000019, 5,0,0x00000019, 5,0,0x00000000, 2,0, " 0x19",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x13231122,11,0,0x13231122,11,0,0x00000000, 2,0, " 0x13231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000001, 4,0,0x00000001, 4,0,0x00000000, 2,0, " 0x1w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000013, 5,0,0x00000013, 5,0,0x00000000, 2,0, " 0x13",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000001, 4,0,0x00000001, 4,0,0x00000000, 2,0, " 0x1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34, " 0a73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 4,0, " 0a7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b21, 5,0, " 0a73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 4,0, " 0a7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34, " 0a12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 7,0, " 0a1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x071c814d, 8,0, " 0a12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 7,0, " 0a1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34, " 0a93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 4,0, " 0a9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b55, 5,0, " 0a93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 4,0, " 0a9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xec11cdb2,10,0, " 0a3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0, " 0aw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00000107, 4,0, " 0a3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0, " 0a",
-__LINE__,0x07ed3252,11,0,0x2e169212,11,0,0x07ed3252,11,0,0x07ed3252,11,0,0xa94f9d32,11,0, " 0773231122",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x0000003f, 4,0,0x0000003f, 4,0,0x000000bd, 4,0, " 077w",
-__LINE__,0x000001fb, 5,0,0x00000305, 5,0,0x000001fb, 5,0,0x000001fb, 5,0,0x00001335, 5,0, " 0773",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x0000003f, 4,0,0x0000003f, 4,0,0x000000bd, 4,0, " 077",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff, 9,34, " 0712413231122",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x000072a1, 7,0,0x000072a1, 7,0,0x003119c9, 7,0, " 071241w",
-__LINE__,0x0003950b, 8,0,0x000adedd, 8,0,0x0003950b, 8,0,0x0003950b, 8,0,0x04fc9e6d, 8,0, " 0712413",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x000072a1, 7,0,0x000072a1, 7,0,0x003119c9, 7,0, " 071241",
-__LINE__,0x00000007, 3,0,0x2f47bf12,11,0,0x00000007, 3,0,0x00000007, 3,0,0x7fffffff,10,34, " 0793231122",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000007, 3,0,0x00000007, 3,0,0x000000bf, 4,0, " 079w",
-__LINE__,0x00000007, 3,0,0x00000319, 5,0,0x00000007, 3,0,0x00000007, 3,0,0x00001369, 5,0, " 0793",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000007, 3,0,0x00000007, 3,0,0x000000bf, 4,0, " 079",
-__LINE__,0x00ed3252,10,0,0x045d6b12,10,0,0x00ed3252,10,0,0x00ed3252,10,0,0x7fffffff, 9,34, " 073231122",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, " 07w",
-__LINE__,0x0000003b, 4,0,0x00000049, 4,0,0x0000003b, 4,0,0x0000003b, 4,0,0x000000b9, 4,0, " 073",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, " 07",
-__LINE__,0x03ed3252,11,0,0x163f0e12,11,0,0x03ed3252,11,0,0x03ed3252,11,0,0x7fffffff, 9,34, " 0373231122",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x0000001f, 4,0,0x0000001f, 4,0,0x00000055, 4,0, " 037w",
-__LINE__,0x000000fb, 5,0,0x00000175, 5,0,0x000000fb, 5,0,0x000000fb, 5,0,0x000008a5, 5,0, " 0373",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x0000001f, 4,0,0x0000001f, 4,0,0x00000055, 4,0, " 037",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff,11,34, " 0312413231122",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x000032a1, 7,0,0x000032a1, 7,0,0x00153589, 7,0, " 031241w",
-__LINE__,0x0001950b, 8,0,0x0004c45d, 8,0,0x0001950b, 8,0,0x0001950b, 8,0,0x02276fed, 8,0, " 0312413",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x000032a1, 7,0,0x000032a1, 7,0,0x00153589, 7,0, " 031241",
-__LINE__,0x00000003, 3,0,0x17703b12,11,0,0x00000003, 3,0,0x00000003, 3,0,0xea867e32,11,0, " 0393231122",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000003, 3,0,0x00000003, 3,0,0x00000057, 4,0, " 039w",
-__LINE__,0x00000003, 3,0,0x00000189, 5,0,0x00000003, 3,0,0x00000003, 3,0,0x000008d9, 5,0, " 0393",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000003, 3,0,0x00000003, 3,0,0x00000057, 4,0, " 039",
-__LINE__,0x006d3252,10,0,0x01fb1112,10,0,0x006d3252,10,0,0x006d3252,10,0,0xd4efec32,10,0, " 033231122",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, " 03w",
-__LINE__,0x0000001b, 4,0,0x00000021, 4,0,0x0000001b, 4,0,0x0000001b, 4,0,0x00000051, 4,0, " 033",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, " 03",
-__LINE__,0x01ed3252,11,0,0x0a534c12,11,0,0x01ed3252,11,0,0x01ed3252,11,0,0xeeeed732,11,0, " 0173231122",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x0000000f, 4,0,0x0000000f, 4,0,0x00000021, 4,0, " 017w",
-__LINE__,0x0000007b, 5,0,0x000000ad, 5,0,0x0000007b, 5,0,0x0000007b, 5,0,0x0000035d, 5,0, " 0173",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x0000000f, 4,0,0x0000000f, 4,0,0x00000021, 4,0, " 017",
-__LINE__,0x542d3252,14,0,0x7fffffff,13,34,0x542d3252,14,0,0x542d3252,14,0,0x7fffffff,10,34, " 0112413231122",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x000012a1, 7,0,0x000012a1, 7,0,0x00074369, 7,0, " 011241w",
-__LINE__,0x0000950b, 8,0,0x0001b71d, 8,0,0x0000950b, 8,0,0x0000950b, 8,0,0x00bcd8ad, 8,0, " 0112413",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x000012a1, 7,0,0x000012a1, 7,0,0x00074369, 7,0, " 011241",
-__LINE__,0x00000001, 3,0,0x0b847912,11,0,0x00000001, 3,0,0x00000001, 3,0,0xac663c32,11,0, " 0193231122",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000001, 3,0,0x00000001, 3,0,0x00000023, 4,0, " 019w",
-__LINE__,0x00000001, 3,0,0x000000c1, 5,0,0x00000001, 3,0,0x00000001, 3,0,0x00000391, 5,0, " 0193",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000001, 3,0,0x00000001, 3,0,0x00000023, 4,0, " 019",
-__LINE__,0x002d3252,10,0,0x00c9e412,10,0,0x002d3252,10,0,0x002d3252,10,0,0x17788732,10,0, " 013231122",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, " 01w",
-__LINE__,0x0000000b, 4,0,0x0000000d, 4,0,0x0000000b, 4,0,0x0000000b, 4,0,0x0000001d, 4,0, " 013",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, " 01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 8,34, " a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 3,0,0x00000000, 0,0,0x0000010b, 3,0, " a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a73, 4,0,0x00000000, 0,0,0x00001b21, 4,0, " a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 3,0,0x00000000, 0,0,0x0000010b, 3,0, " a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 9,34, " a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 6,0,0x00000000, 0,0,0x004604f9, 6,0, " a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00a12413, 7,0,0x00000000, 0,0,0x071c814d, 7,0, " a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 6,0,0x00000000, 0,0,0x004604f9, 6,0, " a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 8,34, " a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 3,0,0x00000000, 0,0,0x0000010d, 3,0, " a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a93, 4,0,0x00000000, 0,0,0x00001b55, 4,0, " a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 3,0,0x00000000, 0,0,0x0000010d, 3,0, " a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xa3231122, 9,0,0x00000000, 0,0,0xec11cdb2, 9,0, " a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0,0x00000000, 0,0,0x0000000a, 2,0, " aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a3, 3,0,0x00000000, 0,0,0x00000107, 3,0, " a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0,0x00000000, 0,0,0x0000000a, 2,0, " a",
-__LINE__,0x07ed3252,10,0,0x2e169212,10,0,0x7fffffff, 9,34,0x2e169212,10,0,0xa94f9d32,10,0, " 773231122",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x00000077, 3,0,0x0000004d, 3,0,0x000000bd, 3,0, " 77w",
-__LINE__,0x000001fb, 4,0,0x00000305, 4,0,0x00000773, 4,0,0x00000305, 4,0,0x00001335, 4,0, " 773",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x00000077, 3,0,0x0000004d, 3,0,0x000000bd, 3,0, " 77",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff, 9,34,0x7fffffff,11,34,0x7fffffff, 8,34, " 712413231122",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x00071241, 6,0,0x00011649, 6,0,0x003119c9, 6,0, " 71241w",
-__LINE__,0x0003950b, 7,0,0x000adedd, 7,0,0x00712413, 7,0,0x000adedd, 7,0,0x04fc9e6d, 7,0, " 712413",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x00071241, 6,0,0x00011649, 6,0,0x003119c9, 6,0, " 71241",
-__LINE__,0x00000007, 2,0,0x2f47bf12,10,0,0x93231122,10,0,0x2f47bf12,10,0,0x7fffffff, 9,34, " 793231122",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000079, 3,0,0x0000004f, 3,0,0x000000bf, 3,0, " 79w",
-__LINE__,0x00000007, 2,0,0x00000319, 4,0,0x00000793, 4,0,0x00000319, 4,0,0x00001369, 4,0, " 793",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000079, 3,0,0x0000004f, 3,0,0x000000bf, 3,0, " 79",
-__LINE__,0x00ed3252, 9,0,0x045d6b12, 9,0,0x73231122, 9,0,0x045d6b12, 9,0,0x7fffffff, 8,34, " 73231122",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, " 7w",
-__LINE__,0x0000003b, 3,0,0x00000049, 3,0,0x00000073, 3,0,0x00000049, 3,0,0x000000b9, 3,0, " 73",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, " 7",
-__LINE__,0x03ed3252,10,0,0x163f0e12,10,0,0x73231122,10,0,0x163f0e12,10,0,0x7fffffff, 8,34, " 373231122",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x00000037, 3,0,0x00000025, 3,0,0x00000055, 3,0, " 37w",
-__LINE__,0x000000fb, 4,0,0x00000175, 4,0,0x00000373, 4,0,0x00000175, 4,0,0x000008a5, 4,0, " 373",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x00000037, 3,0,0x00000025, 3,0,0x00000055, 3,0, " 37",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff, 9,34,0x7fffffff,11,34,0x7fffffff,10,34, " 312413231122",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x00031241, 6,0,0x00007a09, 6,0,0x00153589, 6,0, " 31241w",
-__LINE__,0x0001950b, 7,0,0x0004c45d, 7,0,0x00312413, 7,0,0x0004c45d, 7,0,0x02276fed, 7,0, " 312413",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x00031241, 6,0,0x00007a09, 6,0,0x00153589, 6,0, " 31241",
-__LINE__,0x00000003, 2,0,0x17703b12,10,0,0x93231122,10,0,0x17703b12,10,0,0xea867e32,10,0, " 393231122",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000039, 3,0,0x00000027, 3,0,0x00000057, 3,0, " 39w",
-__LINE__,0x00000003, 2,0,0x00000189, 4,0,0x00000393, 4,0,0x00000189, 4,0,0x000008d9, 4,0, " 393",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000039, 3,0,0x00000027, 3,0,0x00000057, 3,0, " 39",
-__LINE__,0x006d3252, 9,0,0x01fb1112, 9,0,0x33231122, 9,0,0x01fb1112, 9,0,0xd4efec32, 9,0, " 33231122",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, " 3w",
-__LINE__,0x0000001b, 3,0,0x00000021, 3,0,0x00000033, 3,0,0x00000021, 3,0,0x00000051, 3,0, " 33",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, " 3",
-__LINE__,0x01ed3252,10,0,0x0a534c12,10,0,0x73231122,10,0,0x0a534c12,10,0,0xeeeed732,10,0, " 173231122",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x00000017, 3,0,0x00000011, 3,0,0x00000021, 3,0, " 17w",
-__LINE__,0x0000007b, 4,0,0x000000ad, 4,0,0x00000173, 4,0,0x000000ad, 4,0,0x0000035d, 4,0, " 173",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x00000017, 3,0,0x00000011, 3,0,0x00000021, 3,0, " 17",
-__LINE__,0x542d3252,13,0,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff, 9,34, " 112413231122",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x00011241, 6,0,0x00002be9, 6,0,0x00074369, 6,0, " 11241w",
-__LINE__,0x0000950b, 7,0,0x0001b71d, 7,0,0x00112413, 7,0,0x0001b71d, 7,0,0x00bcd8ad, 7,0, " 112413",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x00011241, 6,0,0x00002be9, 6,0,0x00074369, 6,0, " 11241",
-__LINE__,0x00000001, 2,0,0x0b847912,10,0,0x93231122,10,0,0x0b847912,10,0,0xac663c32,10,0, " 193231122",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000019, 3,0,0x00000013, 3,0,0x00000023, 3,0, " 19w",
-__LINE__,0x00000001, 2,0,0x000000c1, 4,0,0x00000193, 4,0,0x000000c1, 4,0,0x00000391, 4,0, " 193",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000019, 3,0,0x00000013, 3,0,0x00000023, 3,0, " 19",
-__LINE__,0x002d3252, 9,0,0x00c9e412, 9,0,0x13231122, 9,0,0x00c9e412, 9,0,0x17788732, 9,0, " 13231122",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, " 1w",
-__LINE__,0x0000000b, 3,0,0x0000000d, 3,0,0x00000013, 3,0,0x0000000d, 3,0,0x0000001d, 3,0, " 13",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, " 1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0xa73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a7, 5,0,0x000000a7, 5,0,0x00000000, 2,0, "+0xa7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000a73, 6,0,0x00000a73, 6,0,0x00000000, 2,0, "+0xa73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a7, 5,0,0x000000a7, 5,0,0x00000000, 2,0, "+0xa7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0xa12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000a1241, 8,0,0x000a1241, 8,0,0x00000000, 2,0, "+0xa1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00a12413, 9,0,0x00a12413, 9,0,0x00000000, 2,0, "+0xa12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000a1241, 8,0,0x000a1241, 8,0,0x00000000, 2,0, "+0xa1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0xa93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a9, 5,0,0x000000a9, 5,0,0x00000000, 2,0, "+0xa9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000a93, 6,0,0x00000a93, 6,0,0x00000000, 2,0, "+0xa93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a9, 5,0,0x000000a9, 5,0,0x00000000, 2,0, "+0xa9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xa3231122,11,0,0xa3231122,11,0,0x00000000, 2,0, "+0xa3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x0000000a, 4,0,0x0000000a, 4,0,0x00000000, 2,0, "+0xaw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x000000a3, 5,0,0x000000a3, 5,0,0x00000000, 2,0, "+0xa3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x0000000a, 4,0,0x0000000a, 4,0,0x00000000, 2,0, "+0xa",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0x773231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000077, 5,0,0x00000077, 5,0,0x00000000, 2,0, "+0x77w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000773, 6,0,0x00000773, 6,0,0x00000000, 2,0, "+0x773",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000077, 5,0,0x00000077, 5,0,0x00000000, 2,0, "+0x77",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0x712413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00071241, 8,0,0x00071241, 8,0,0x00000000, 2,0, "+0x71241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00712413, 9,0,0x00712413, 9,0,0x00000000, 2,0, "+0x712413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00071241, 8,0,0x00071241, 8,0,0x00000000, 2,0, "+0x71241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, "+0x793231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000079, 5,0,0x00000079, 5,0,0x00000000, 2,0, "+0x79w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000793, 6,0,0x00000793, 6,0,0x00000000, 2,0, "+0x793",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000079, 5,0,0x00000079, 5,0,0x00000000, 2,0, "+0x79",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,11,0,0x73231122,11,0,0x00000000, 2,0, "+0x73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000007, 4,0,0x00000007, 4,0,0x00000000, 2,0, "+0x7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000073, 5,0,0x00000073, 5,0,0x00000000, 2,0, "+0x73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000007, 4,0,0x00000007, 4,0,0x00000000, 2,0, "+0x7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,12,0,0x73231122,12,0,0x00000000, 2,0, "+0x373231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000037, 5,0,0x00000037, 5,0,0x00000000, 2,0, "+0x37w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000373, 6,0,0x00000373, 6,0,0x00000000, 2,0, "+0x373",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000037, 5,0,0x00000037, 5,0,0x00000000, 2,0, "+0x37",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,11,34,0x7fffffff,11,34,0x00000000, 2,0, "+0x312413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00031241, 8,0,0x00031241, 8,0,0x00000000, 2,0, "+0x31241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00312413, 9,0,0x00312413, 9,0,0x00000000, 2,0, "+0x312413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00031241, 8,0,0x00031241, 8,0,0x00000000, 2,0, "+0x31241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, "+0x393231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000039, 5,0,0x00000039, 5,0,0x00000000, 2,0, "+0x39w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000393, 6,0,0x00000393, 6,0,0x00000000, 2,0, "+0x393",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000039, 5,0,0x00000039, 5,0,0x00000000, 2,0, "+0x39",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x33231122,11,0,0x33231122,11,0,0x00000000, 2,0, "+0x33231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000003, 4,0,0x00000003, 4,0,0x00000000, 2,0, "+0x3w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000033, 5,0,0x00000033, 5,0,0x00000000, 2,0, "+0x33",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000003, 4,0,0x00000003, 4,0,0x00000000, 2,0, "+0x3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x73231122,12,0,0x73231122,12,0,0x00000000, 2,0, "+0x173231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000017, 5,0,0x00000017, 5,0,0x00000000, 2,0, "+0x17w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000173, 6,0,0x00000173, 6,0,0x00000000, 2,0, "+0x173",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000017, 5,0,0x00000017, 5,0,0x00000000, 2,0, "+0x17",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x7fffffff,14,34,0x7fffffff,14,34,0x00000000, 2,0, "+0x112413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00011241, 8,0,0x00011241, 8,0,0x00000000, 2,0, "+0x11241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00112413, 9,0,0x00112413, 9,0,0x00000000, 2,0, "+0x112413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00011241, 8,0,0x00011241, 8,0,0x00000000, 2,0, "+0x11241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x93231122,12,0,0x93231122,12,0,0x00000000, 2,0, "+0x193231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000019, 5,0,0x00000019, 5,0,0x00000000, 2,0, "+0x19w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000193, 6,0,0x00000193, 6,0,0x00000000, 2,0, "+0x193",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000019, 5,0,0x00000019, 5,0,0x00000000, 2,0, "+0x19",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x13231122,11,0,0x13231122,11,0,0x00000000, 2,0, "+0x13231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000001, 4,0,0x00000001, 4,0,0x00000000, 2,0, "+0x1w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000013, 5,0,0x00000013, 5,0,0x00000000, 2,0, "+0x13",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000001, 4,0,0x00000001, 4,0,0x00000000, 2,0, "+0x1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34, "+0a73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 4,0, "+0a7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b21, 5,0, "+0a73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 4,0, "+0a7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff,10,34, "+0a12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 7,0, "+0a1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x071c814d, 8,0, "+0a12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 7,0, "+0a1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34, "+0a93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 4,0, "+0a9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b55, 5,0, "+0a93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 4,0, "+0a9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xec11cdb2,10,0, "+0a3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0, "+0aw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x00000107, 4,0, "+0a3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 3,0, "+0a",
-__LINE__,0x07ed3252,11,0,0x2e169212,11,0,0x07ed3252,11,0,0x07ed3252,11,0,0xa94f9d32,11,0, "+0773231122",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x0000003f, 4,0,0x0000003f, 4,0,0x000000bd, 4,0, "+077w",
-__LINE__,0x000001fb, 5,0,0x00000305, 5,0,0x000001fb, 5,0,0x000001fb, 5,0,0x00001335, 5,0, "+0773",
-__LINE__,0x0000003f, 4,0,0x0000004d, 4,0,0x0000003f, 4,0,0x0000003f, 4,0,0x000000bd, 4,0, "+077",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff, 9,34, "+0712413231122",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x000072a1, 7,0,0x000072a1, 7,0,0x003119c9, 7,0, "+071241w",
-__LINE__,0x0003950b, 8,0,0x000adedd, 8,0,0x0003950b, 8,0,0x0003950b, 8,0,0x04fc9e6d, 8,0, "+0712413",
-__LINE__,0x000072a1, 7,0,0x00011649, 7,0,0x000072a1, 7,0,0x000072a1, 7,0,0x003119c9, 7,0, "+071241",
-__LINE__,0x00000007, 3,0,0x2f47bf12,11,0,0x00000007, 3,0,0x00000007, 3,0,0x7fffffff,10,34, "+0793231122",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000007, 3,0,0x00000007, 3,0,0x000000bf, 4,0, "+079w",
-__LINE__,0x00000007, 3,0,0x00000319, 5,0,0x00000007, 3,0,0x00000007, 3,0,0x00001369, 5,0, "+0793",
-__LINE__,0x00000007, 3,0,0x0000004f, 4,0,0x00000007, 3,0,0x00000007, 3,0,0x000000bf, 4,0, "+079",
-__LINE__,0x00ed3252,10,0,0x045d6b12,10,0,0x00ed3252,10,0,0x00ed3252,10,0,0x7fffffff, 9,34, "+073231122",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, "+07w",
-__LINE__,0x0000003b, 4,0,0x00000049, 4,0,0x0000003b, 4,0,0x0000003b, 4,0,0x000000b9, 4,0, "+073",
-__LINE__,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0,0x00000007, 3,0, "+07",
-__LINE__,0x03ed3252,11,0,0x163f0e12,11,0,0x03ed3252,11,0,0x03ed3252,11,0,0x7fffffff, 9,34, "+0373231122",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x0000001f, 4,0,0x0000001f, 4,0,0x00000055, 4,0, "+037w",
-__LINE__,0x000000fb, 5,0,0x00000175, 5,0,0x000000fb, 5,0,0x000000fb, 5,0,0x000008a5, 5,0, "+0373",
-__LINE__,0x0000001f, 4,0,0x00000025, 4,0,0x0000001f, 4,0,0x0000001f, 4,0,0x00000055, 4,0, "+037",
-__LINE__,0x7fffffff,13,34,0x7fffffff,12,34,0x7fffffff,13,34,0x7fffffff,13,34,0x7fffffff,11,34, "+0312413231122",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x000032a1, 7,0,0x000032a1, 7,0,0x00153589, 7,0, "+031241w",
-__LINE__,0x0001950b, 8,0,0x0004c45d, 8,0,0x0001950b, 8,0,0x0001950b, 8,0,0x02276fed, 8,0, "+0312413",
-__LINE__,0x000032a1, 7,0,0x00007a09, 7,0,0x000032a1, 7,0,0x000032a1, 7,0,0x00153589, 7,0, "+031241",
-__LINE__,0x00000003, 3,0,0x17703b12,11,0,0x00000003, 3,0,0x00000003, 3,0,0xea867e32,11,0, "+0393231122",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000003, 3,0,0x00000003, 3,0,0x00000057, 4,0, "+039w",
-__LINE__,0x00000003, 3,0,0x00000189, 5,0,0x00000003, 3,0,0x00000003, 3,0,0x000008d9, 5,0, "+0393",
-__LINE__,0x00000003, 3,0,0x00000027, 4,0,0x00000003, 3,0,0x00000003, 3,0,0x00000057, 4,0, "+039",
-__LINE__,0x006d3252,10,0,0x01fb1112,10,0,0x006d3252,10,0,0x006d3252,10,0,0xd4efec32,10,0, "+033231122",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, "+03w",
-__LINE__,0x0000001b, 4,0,0x00000021, 4,0,0x0000001b, 4,0,0x0000001b, 4,0,0x00000051, 4,0, "+033",
-__LINE__,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0,0x00000003, 3,0, "+03",
-__LINE__,0x01ed3252,11,0,0x0a534c12,11,0,0x01ed3252,11,0,0x01ed3252,11,0,0xeeeed732,11,0, "+0173231122",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x0000000f, 4,0,0x0000000f, 4,0,0x00000021, 4,0, "+017w",
-__LINE__,0x0000007b, 5,0,0x000000ad, 5,0,0x0000007b, 5,0,0x0000007b, 5,0,0x0000035d, 5,0, "+0173",
-__LINE__,0x0000000f, 4,0,0x00000011, 4,0,0x0000000f, 4,0,0x0000000f, 4,0,0x00000021, 4,0, "+017",
-__LINE__,0x542d3252,14,0,0x7fffffff,13,34,0x542d3252,14,0,0x542d3252,14,0,0x7fffffff,10,34, "+0112413231122",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x000012a1, 7,0,0x000012a1, 7,0,0x00074369, 7,0, "+011241w",
-__LINE__,0x0000950b, 8,0,0x0001b71d, 8,0,0x0000950b, 8,0,0x0000950b, 8,0,0x00bcd8ad, 8,0, "+0112413",
-__LINE__,0x000012a1, 7,0,0x00002be9, 7,0,0x000012a1, 7,0,0x000012a1, 7,0,0x00074369, 7,0, "+011241",
-__LINE__,0x00000001, 3,0,0x0b847912,11,0,0x00000001, 3,0,0x00000001, 3,0,0xac663c32,11,0, "+0193231122",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000001, 3,0,0x00000001, 3,0,0x00000023, 4,0, "+019w",
-__LINE__,0x00000001, 3,0,0x000000c1, 5,0,0x00000001, 3,0,0x00000001, 3,0,0x00000391, 5,0, "+0193",
-__LINE__,0x00000001, 3,0,0x00000013, 4,0,0x00000001, 3,0,0x00000001, 3,0,0x00000023, 4,0, "+019",
-__LINE__,0x002d3252,10,0,0x00c9e412,10,0,0x002d3252,10,0,0x002d3252,10,0,0x17788732,10,0, "+013231122",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, "+01w",
-__LINE__,0x0000000b, 4,0,0x0000000d, 4,0,0x0000000b, 4,0,0x0000000b, 4,0,0x0000001d, 4,0, "+013",
-__LINE__,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0,0x00000001, 3,0, "+01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 8,34, "+a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 3,0,0x00000000, 0,0,0x0000010b, 3,0, "+a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a73, 4,0,0x00000000, 0,0,0x00001b21, 4,0, "+a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 3,0,0x00000000, 0,0,0x0000010b, 3,0, "+a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 9,34, "+a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 6,0,0x00000000, 0,0,0x004604f9, 6,0, "+a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00a12413, 7,0,0x00000000, 0,0,0x071c814d, 7,0, "+a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 6,0,0x00000000, 0,0,0x004604f9, 6,0, "+a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34,0x00000000, 0,0,0x7fffffff, 8,34, "+a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 3,0,0x00000000, 0,0,0x0000010d, 3,0, "+a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a93, 4,0,0x00000000, 0,0,0x00001b55, 4,0, "+a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 3,0,0x00000000, 0,0,0x0000010d, 3,0, "+a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xa3231122, 9,0,0x00000000, 0,0,0xec11cdb2, 9,0, "+a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0,0x00000000, 0,0,0x0000000a, 2,0, "+aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a3, 3,0,0x00000000, 0,0,0x00000107, 3,0, "+a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0,0x00000000, 0,0,0x0000000a, 2,0, "+a",
-__LINE__,0x07ed3252,10,0,0x2e169212,10,0,0x7fffffff, 9,34,0x2e169212,10,0,0xa94f9d32,10,0, "+773231122",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x00000077, 3,0,0x0000004d, 3,0,0x000000bd, 3,0, "+77w",
-__LINE__,0x000001fb, 4,0,0x00000305, 4,0,0x00000773, 4,0,0x00000305, 4,0,0x00001335, 4,0, "+773",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x00000077, 3,0,0x0000004d, 3,0,0x000000bd, 3,0, "+77",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff, 9,34,0x7fffffff,11,34,0x7fffffff, 8,34, "+712413231122",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x00071241, 6,0,0x00011649, 6,0,0x003119c9, 6,0, "+71241w",
-__LINE__,0x0003950b, 7,0,0x000adedd, 7,0,0x00712413, 7,0,0x000adedd, 7,0,0x04fc9e6d, 7,0, "+712413",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x00071241, 6,0,0x00011649, 6,0,0x003119c9, 6,0, "+71241",
-__LINE__,0x00000007, 2,0,0x2f47bf12,10,0,0x93231122,10,0,0x2f47bf12,10,0,0x7fffffff, 9,34, "+793231122",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000079, 3,0,0x0000004f, 3,0,0x000000bf, 3,0, "+79w",
-__LINE__,0x00000007, 2,0,0x00000319, 4,0,0x00000793, 4,0,0x00000319, 4,0,0x00001369, 4,0, "+793",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000079, 3,0,0x0000004f, 3,0,0x000000bf, 3,0, "+79",
-__LINE__,0x00ed3252, 9,0,0x045d6b12, 9,0,0x73231122, 9,0,0x045d6b12, 9,0,0x7fffffff, 8,34, "+73231122",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, "+7w",
-__LINE__,0x0000003b, 3,0,0x00000049, 3,0,0x00000073, 3,0,0x00000049, 3,0,0x000000b9, 3,0, "+73",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, "+7",
-__LINE__,0x03ed3252,10,0,0x163f0e12,10,0,0x73231122,10,0,0x163f0e12,10,0,0x7fffffff, 8,34, "+373231122",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x00000037, 3,0,0x00000025, 3,0,0x00000055, 3,0, "+37w",
-__LINE__,0x000000fb, 4,0,0x00000175, 4,0,0x00000373, 4,0,0x00000175, 4,0,0x000008a5, 4,0, "+373",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x00000037, 3,0,0x00000025, 3,0,0x00000055, 3,0, "+37",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff, 9,34,0x7fffffff,11,34,0x7fffffff,10,34, "+312413231122",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x00031241, 6,0,0x00007a09, 6,0,0x00153589, 6,0, "+31241w",
-__LINE__,0x0001950b, 7,0,0x0004c45d, 7,0,0x00312413, 7,0,0x0004c45d, 7,0,0x02276fed, 7,0, "+312413",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x00031241, 6,0,0x00007a09, 6,0,0x00153589, 6,0, "+31241",
-__LINE__,0x00000003, 2,0,0x17703b12,10,0,0x93231122,10,0,0x17703b12,10,0,0xea867e32,10,0, "+393231122",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000039, 3,0,0x00000027, 3,0,0x00000057, 3,0, "+39w",
-__LINE__,0x00000003, 2,0,0x00000189, 4,0,0x00000393, 4,0,0x00000189, 4,0,0x000008d9, 4,0, "+393",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000039, 3,0,0x00000027, 3,0,0x00000057, 3,0, "+39",
-__LINE__,0x006d3252, 9,0,0x01fb1112, 9,0,0x33231122, 9,0,0x01fb1112, 9,0,0xd4efec32, 9,0, "+33231122",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, "+3w",
-__LINE__,0x0000001b, 3,0,0x00000021, 3,0,0x00000033, 3,0,0x00000021, 3,0,0x00000051, 3,0, "+33",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, "+3",
-__LINE__,0x01ed3252,10,0,0x0a534c12,10,0,0x73231122,10,0,0x0a534c12,10,0,0xeeeed732,10,0, "+173231122",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x00000017, 3,0,0x00000011, 3,0,0x00000021, 3,0, "+17w",
-__LINE__,0x0000007b, 4,0,0x000000ad, 4,0,0x00000173, 4,0,0x000000ad, 4,0,0x0000035d, 4,0, "+173",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x00000017, 3,0,0x00000011, 3,0,0x00000021, 3,0, "+17",
-__LINE__,0x542d3252,13,0,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff, 9,34, "+112413231122",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x00011241, 6,0,0x00002be9, 6,0,0x00074369, 6,0, "+11241w",
-__LINE__,0x0000950b, 7,0,0x0001b71d, 7,0,0x00112413, 7,0,0x0001b71d, 7,0,0x00bcd8ad, 7,0, "+112413",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x00011241, 6,0,0x00002be9, 6,0,0x00074369, 6,0, "+11241",
-__LINE__,0x00000001, 2,0,0x0b847912,10,0,0x93231122,10,0,0x0b847912,10,0,0xac663c32,10,0, "+193231122",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000019, 3,0,0x00000013, 3,0,0x00000023, 3,0, "+19w",
-__LINE__,0x00000001, 2,0,0x000000c1, 4,0,0x00000193, 4,0,0x000000c1, 4,0,0x00000391, 4,0, "+193",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000019, 3,0,0x00000013, 3,0,0x00000023, 3,0, "+19",
-__LINE__,0x002d3252, 9,0,0x00c9e412, 9,0,0x13231122, 9,0,0x00c9e412, 9,0,0x17788732, 9,0, "+13231122",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, "+1w",
-__LINE__,0x0000000b, 3,0,0x0000000d, 3,0,0x00000013, 3,0,0x0000000d, 3,0,0x0000001d, 3,0, "+13",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, "+1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0xa73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff59, 5,0,0xffffff59, 5,0,0x00000000, 2,0, "-0xa7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffff58d, 6,0,0xfffff58d, 6,0,0x00000000, 2,0, "-0xa73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff59, 5,0,0xffffff59, 5,0,0x00000000, 2,0, "-0xa7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0xa12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfff5edbf, 8,0,0xfff5edbf, 8,0,0x00000000, 2,0, "-0xa1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xff5edbed, 9,0,0xff5edbed, 9,0,0x00000000, 2,0, "-0xa12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfff5edbf, 8,0,0xfff5edbf, 8,0,0x00000000, 2,0, "-0xa1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0xa93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff57, 5,0,0xffffff57, 5,0,0x00000000, 2,0, "-0xa9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffff56d, 6,0,0xfffff56d, 6,0,0x00000000, 2,0, "-0xa93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff57, 5,0,0xffffff57, 5,0,0x00000000, 2,0, "-0xa9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x5cdceede,11,0,0x5cdceede,11,0,0x00000000, 2,0, "-0xa3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffff6, 4,0,0xfffffff6, 4,0,0x00000000, 2,0, "-0xaw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff5d, 5,0,0xffffff5d, 5,0,0x00000000, 2,0, "-0xa3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffff6, 4,0,0xfffffff6, 4,0,0x00000000, 2,0, "-0xa",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0x773231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff89, 5,0,0xffffff89, 5,0,0x00000000, 2,0, "-0x77w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffff88d, 6,0,0xfffff88d, 6,0,0x00000000, 2,0, "-0x773",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff89, 5,0,0xffffff89, 5,0,0x00000000, 2,0, "-0x77",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0x712413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfff8edbf, 8,0,0xfff8edbf, 8,0,0x00000000, 2,0, "-0x71241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xff8edbed, 9,0,0xff8edbed, 9,0,0x00000000, 2,0, "-0x712413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfff8edbf, 8,0,0xfff8edbf, 8,0,0x00000000, 2,0, "-0x71241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x6cdceede,12,0,0x6cdceede,12,0,0x00000000, 2,0, "-0x793231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff87, 5,0,0xffffff87, 5,0,0x00000000, 2,0, "-0x79w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffff86d, 6,0,0xfffff86d, 6,0,0x00000000, 2,0, "-0x793",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff87, 5,0,0xffffff87, 5,0,0x00000000, 2,0, "-0x79",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x8cdceede,11,0,0x8cdceede,11,0,0x00000000, 2,0, "-0x73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0x00000000, 2,0, "-0x7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffff8d, 5,0,0xffffff8d, 5,0,0x00000000, 2,0, "-0x73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffff9, 4,0,0xfffffff9, 4,0,0x00000000, 2,0, "-0x7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x8cdceede,12,0,0x8cdceede,12,0,0x00000000, 2,0, "-0x373231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffc9, 5,0,0xffffffc9, 5,0,0x00000000, 2,0, "-0x37w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffc8d, 6,0,0xfffffc8d, 6,0,0x00000000, 2,0, "-0x373",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffc9, 5,0,0xffffffc9, 5,0,0x00000000, 2,0, "-0x37",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,11,34,0x80000000,11,34,0x00000000, 2,0, "-0x312413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffcedbf, 8,0,0xfffcedbf, 8,0,0x00000000, 2,0, "-0x31241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffcedbed, 9,0,0xffcedbed, 9,0,0x00000000, 2,0, "-0x312413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffcedbf, 8,0,0xfffcedbf, 8,0,0x00000000, 2,0, "-0x31241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x6cdceede,12,0,0x6cdceede,12,0,0x00000000, 2,0, "-0x393231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffc7, 5,0,0xffffffc7, 5,0,0x00000000, 2,0, "-0x39w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffc6d, 6,0,0xfffffc6d, 6,0,0x00000000, 2,0, "-0x393",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffc7, 5,0,0xffffffc7, 5,0,0x00000000, 2,0, "-0x39",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xccdceede,11,0,0xccdceede,11,0,0x00000000, 2,0, "-0x33231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0x00000000, 2,0, "-0x3w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffcd, 5,0,0xffffffcd, 5,0,0x00000000, 2,0, "-0x33",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffffd, 4,0,0xfffffffd, 4,0,0x00000000, 2,0, "-0x3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x8cdceede,12,0,0x8cdceede,12,0,0x00000000, 2,0, "-0x173231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffe9, 5,0,0xffffffe9, 5,0,0x00000000, 2,0, "-0x17w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffe8d, 6,0,0xfffffe8d, 6,0,0x00000000, 2,0, "-0x173",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffe9, 5,0,0xffffffe9, 5,0,0x00000000, 2,0, "-0x17",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x80000000,14,34,0x80000000,14,34,0x00000000, 2,0, "-0x112413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffeedbf, 8,0,0xfffeedbf, 8,0,0x00000000, 2,0, "-0x11241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffeedbed, 9,0,0xffeedbed, 9,0,0x00000000, 2,0, "-0x112413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffeedbf, 8,0,0xfffeedbf, 8,0,0x00000000, 2,0, "-0x11241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x6cdceede,12,0,0x6cdceede,12,0,0x00000000, 2,0, "-0x193231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffe7, 5,0,0xffffffe7, 5,0,0x00000000, 2,0, "-0x19w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xfffffe6d, 6,0,0xfffffe6d, 6,0,0x00000000, 2,0, "-0x193",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffe7, 5,0,0xffffffe7, 5,0,0x00000000, 2,0, "-0x19",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xecdceede,11,0,0xecdceede,11,0,0x00000000, 2,0, "-0x13231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffff, 4,0,0xffffffff, 4,0,0x00000000, 2,0, "-0x1w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffed, 5,0,0xffffffed, 5,0,0x00000000, 2,0, "-0x13",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0xffffffff, 4,0,0xffffffff, 4,0,0x00000000, 2,0, "-0x1",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000, 9,34, "-0a73231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef5, 4,0, "-0a7w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xffffe4df, 5,0, "-0a73",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef5, 4,0, "-0a7",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000,10,34, "-0a12413231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xffb9fb07, 7,0, "-0a1241w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xf8e37eb3, 8,0, "-0a12413",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xffb9fb07, 7,0, "-0a1241",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x80000000, 9,34, "-0a93231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef3, 4,0, "-0a9w",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xffffe4ab, 5,0, "-0a93",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef3, 4,0, "-0a9",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0x13ee324e,10,0, "-0a3231122",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 3,0, "-0aw",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffef9, 4,0, "-0a3",
-__LINE__,0x00000000, 2,0,0x00000000, 2,0,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 3,0, "-0a",
-__LINE__,0xf812cdae,11,0,0xd1e96dee,11,0,0xf812cdae,11,0,0xf812cdae,11,0,0x56b062ce,11,0, "-0773231122",
-__LINE__,0xffffffc1, 4,0,0xffffffb3, 4,0,0xffffffc1, 4,0,0xffffffc1, 4,0,0xffffff43, 4,0, "-077w",
-__LINE__,0xfffffe05, 5,0,0xfffffcfb, 5,0,0xfffffe05, 5,0,0xfffffe05, 5,0,0xffffeccb, 5,0, "-0773",
-__LINE__,0xffffffc1, 4,0,0xffffffb3, 4,0,0xffffffc1, 4,0,0xffffffc1, 4,0,0xffffff43, 4,0, "-077",
-__LINE__,0x80000000,13,34,0x80000000,12,34,0x80000000,13,34,0x80000000,13,34,0x80000000, 9,34, "-0712413231122",
-__LINE__,0xffff8d5f, 7,0,0xfffee9b7, 7,0,0xffff8d5f, 7,0,0xffff8d5f, 7,0,0xffcee637, 7,0, "-071241w",
-__LINE__,0xfffc6af5, 8,0,0xfff52123, 8,0,0xfffc6af5, 8,0,0xfffc6af5, 8,0,0xfb036193, 8,0, "-0712413",
-__LINE__,0xffff8d5f, 7,0,0xfffee9b7, 7,0,0xffff8d5f, 7,0,0xffff8d5f, 7,0,0xffcee637, 7,0, "-071241",
-__LINE__,0xfffffff9, 3,0,0xd0b840ee,11,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0x80000000,10,34, "-0793231122",
-__LINE__,0xfffffff9, 3,0,0xffffffb1, 4,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xffffff41, 4,0, "-079w",
-__LINE__,0xfffffff9, 3,0,0xfffffce7, 5,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xffffec97, 5,0, "-0793",
-__LINE__,0xfffffff9, 3,0,0xffffffb1, 4,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xffffff41, 4,0, "-079",
-__LINE__,0xff12cdae,10,0,0xfba294ee,10,0,0xff12cdae,10,0,0xff12cdae,10,0,0x80000000, 9,34, "-073231122",
-__LINE__,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0, "-07w",
-__LINE__,0xffffffc5, 4,0,0xffffffb7, 4,0,0xffffffc5, 4,0,0xffffffc5, 4,0,0xffffff47, 4,0, "-073",
-__LINE__,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0,0xfffffff9, 3,0, "-07",
-__LINE__,0xfc12cdae,11,0,0xe9c0f1ee,11,0,0xfc12cdae,11,0,0xfc12cdae,11,0,0x80000000, 9,34, "-0373231122",
-__LINE__,0xffffffe1, 4,0,0xffffffdb, 4,0,0xffffffe1, 4,0,0xffffffe1, 4,0,0xffffffab, 4,0, "-037w",
-__LINE__,0xffffff05, 5,0,0xfffffe8b, 5,0,0xffffff05, 5,0,0xffffff05, 5,0,0xfffff75b, 5,0, "-0373",
-__LINE__,0xffffffe1, 4,0,0xffffffdb, 4,0,0xffffffe1, 4,0,0xffffffe1, 4,0,0xffffffab, 4,0, "-037",
-__LINE__,0x80000000,13,34,0x80000000,12,34,0x80000000,13,34,0x80000000,13,34,0x80000000,11,34, "-0312413231122",
-__LINE__,0xffffcd5f, 7,0,0xffff85f7, 7,0,0xffffcd5f, 7,0,0xffffcd5f, 7,0,0xffeaca77, 7,0, "-031241w",
-__LINE__,0xfffe6af5, 8,0,0xfffb3ba3, 8,0,0xfffe6af5, 8,0,0xfffe6af5, 8,0,0xfdd89013, 8,0, "-0312413",
-__LINE__,0xffffcd5f, 7,0,0xffff85f7, 7,0,0xffffcd5f, 7,0,0xffffcd5f, 7,0,0xffeaca77, 7,0, "-031241",
-__LINE__,0xfffffffd, 3,0,0xe88fc4ee,11,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0x157981ce,11,0, "-0393231122",
-__LINE__,0xfffffffd, 3,0,0xffffffd9, 4,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xffffffa9, 4,0, "-039w",
-__LINE__,0xfffffffd, 3,0,0xfffffe77, 5,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffff727, 5,0, "-0393",
-__LINE__,0xfffffffd, 3,0,0xffffffd9, 4,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xffffffa9, 4,0, "-039",
-__LINE__,0xff92cdae,10,0,0xfe04eeee,10,0,0xff92cdae,10,0,0xff92cdae,10,0,0x2b1013ce,10,0, "-033231122",
-__LINE__,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0, "-03w",
-__LINE__,0xffffffe5, 4,0,0xffffffdf, 4,0,0xffffffe5, 4,0,0xffffffe5, 4,0,0xffffffaf, 4,0, "-033",
-__LINE__,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0,0xfffffffd, 3,0, "-03",
-__LINE__,0xfe12cdae,11,0,0xf5acb3ee,11,0,0xfe12cdae,11,0,0xfe12cdae,11,0,0x111128ce,11,0, "-0173231122",
-__LINE__,0xfffffff1, 4,0,0xffffffef, 4,0,0xfffffff1, 4,0,0xfffffff1, 4,0,0xffffffdf, 4,0, "-017w",
-__LINE__,0xffffff85, 5,0,0xffffff53, 5,0,0xffffff85, 5,0,0xffffff85, 5,0,0xfffffca3, 5,0, "-0173",
-__LINE__,0xfffffff1, 4,0,0xffffffef, 4,0,0xfffffff1, 4,0,0xfffffff1, 4,0,0xffffffdf, 4,0, "-017",
-__LINE__,0xabd2cdae,14,0,0x80000000,13,34,0xabd2cdae,14,0,0xabd2cdae,14,0,0x80000000,10,34, "-0112413231122",
-__LINE__,0xffffed5f, 7,0,0xffffd417, 7,0,0xffffed5f, 7,0,0xffffed5f, 7,0,0xfff8bc97, 7,0, "-011241w",
-__LINE__,0xffff6af5, 8,0,0xfffe48e3, 8,0,0xffff6af5, 8,0,0xffff6af5, 8,0,0xff432753, 8,0, "-0112413",
-__LINE__,0xffffed5f, 7,0,0xffffd417, 7,0,0xffffed5f, 7,0,0xffffed5f, 7,0,0xfff8bc97, 7,0, "-011241",
-__LINE__,0xffffffff, 3,0,0xf47b86ee,11,0,0xffffffff, 3,0,0xffffffff, 3,0,0x5399c3ce,11,0, "-0193231122",
-__LINE__,0xffffffff, 3,0,0xffffffed, 4,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffdd, 4,0, "-019w",
-__LINE__,0xffffffff, 3,0,0xffffff3f, 5,0,0xffffffff, 3,0,0xffffffff, 3,0,0xfffffc6f, 5,0, "-0193",
-__LINE__,0xffffffff, 3,0,0xffffffed, 4,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffdd, 4,0, "-019",
-__LINE__,0xffd2cdae,10,0,0xff361bee,10,0,0xffd2cdae,10,0,0xffd2cdae,10,0,0xe88778ce,10,0, "-013231122",
-__LINE__,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0, "-01w",
-__LINE__,0xfffffff5, 4,0,0xfffffff3, 4,0,0xfffffff5, 4,0,0xfffffff5, 4,0,0xffffffe3, 4,0, "-013",
-__LINE__,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0,0xffffffff, 3,0, "-01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000, 9,34,0x00000000, 0,0,0x80000000, 8,34, "-a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff59, 3,0,0x00000000, 0,0,0xfffffef5, 3,0, "-a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffff58d, 4,0,0x00000000, 0,0,0xffffe4df, 4,0, "-a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff59, 3,0,0x00000000, 0,0,0xfffffef5, 3,0, "-a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000, 9,34,0x00000000, 0,0,0x80000000, 9,34, "-a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfff5edbf, 6,0,0x00000000, 0,0,0xffb9fb07, 6,0, "-a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xff5edbed, 7,0,0x00000000, 0,0,0xf8e37eb3, 7,0, "-a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfff5edbf, 6,0,0x00000000, 0,0,0xffb9fb07, 6,0, "-a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x80000000, 9,34,0x00000000, 0,0,0x80000000, 8,34, "-a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff57, 3,0,0x00000000, 0,0,0xfffffef3, 3,0, "-a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffff56d, 4,0,0x00000000, 0,0,0xffffe4ab, 4,0, "-a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff57, 3,0,0x00000000, 0,0,0xfffffef3, 3,0, "-a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x5cdceede, 9,0,0x00000000, 0,0,0x13ee324e, 9,0, "-a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 2,0,0x00000000, 0,0,0xfffffff6, 2,0, "-aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xffffff5d, 3,0,0x00000000, 0,0,0xfffffef9, 3,0, "-a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xfffffff6, 2,0,0x00000000, 0,0,0xfffffff6, 2,0, "-a",
-__LINE__,0xf812cdae,10,0,0xd1e96dee,10,0,0x80000000, 9,34,0xd1e96dee,10,0,0x56b062ce,10,0, "-773231122",
-__LINE__,0xffffffc1, 3,0,0xffffffb3, 3,0,0xffffff89, 3,0,0xffffffb3, 3,0,0xffffff43, 3,0, "-77w",
-__LINE__,0xfffffe05, 4,0,0xfffffcfb, 4,0,0xfffff88d, 4,0,0xfffffcfb, 4,0,0xffffeccb, 4,0, "-773",
-__LINE__,0xffffffc1, 3,0,0xffffffb3, 3,0,0xffffff89, 3,0,0xffffffb3, 3,0,0xffffff43, 3,0, "-77",
-__LINE__,0x80000000,12,34,0x80000000,11,34,0x80000000, 9,34,0x80000000,11,34,0x80000000, 8,34, "-712413231122",
-__LINE__,0xffff8d5f, 6,0,0xfffee9b7, 6,0,0xfff8edbf, 6,0,0xfffee9b7, 6,0,0xffcee637, 6,0, "-71241w",
-__LINE__,0xfffc6af5, 7,0,0xfff52123, 7,0,0xff8edbed, 7,0,0xfff52123, 7,0,0xfb036193, 7,0, "-712413",
-__LINE__,0xffff8d5f, 6,0,0xfffee9b7, 6,0,0xfff8edbf, 6,0,0xfffee9b7, 6,0,0xffcee637, 6,0, "-71241",
-__LINE__,0xfffffff9, 2,0,0xd0b840ee,10,0,0x6cdceede,10,0,0xd0b840ee,10,0,0x80000000, 9,34, "-793231122",
-__LINE__,0xfffffff9, 2,0,0xffffffb1, 3,0,0xffffff87, 3,0,0xffffffb1, 3,0,0xffffff41, 3,0, "-79w",
-__LINE__,0xfffffff9, 2,0,0xfffffce7, 4,0,0xfffff86d, 4,0,0xfffffce7, 4,0,0xffffec97, 4,0, "-793",
-__LINE__,0xfffffff9, 2,0,0xffffffb1, 3,0,0xffffff87, 3,0,0xffffffb1, 3,0,0xffffff41, 3,0, "-79",
-__LINE__,0xff12cdae, 9,0,0xfba294ee, 9,0,0x8cdceede, 9,0,0xfba294ee, 9,0,0x80000000, 8,34, "-73231122",
-__LINE__,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0, "-7w",
-__LINE__,0xffffffc5, 3,0,0xffffffb7, 3,0,0xffffff8d, 3,0,0xffffffb7, 3,0,0xffffff47, 3,0, "-73",
-__LINE__,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0,0xfffffff9, 2,0, "-7",
-__LINE__,0xfc12cdae,10,0,0xe9c0f1ee,10,0,0x8cdceede,10,0,0xe9c0f1ee,10,0,0x80000000, 8,34, "-373231122",
-__LINE__,0xffffffe1, 3,0,0xffffffdb, 3,0,0xffffffc9, 3,0,0xffffffdb, 3,0,0xffffffab, 3,0, "-37w",
-__LINE__,0xffffff05, 4,0,0xfffffe8b, 4,0,0xfffffc8d, 4,0,0xfffffe8b, 4,0,0xfffff75b, 4,0, "-373",
-__LINE__,0xffffffe1, 3,0,0xffffffdb, 3,0,0xffffffc9, 3,0,0xffffffdb, 3,0,0xffffffab, 3,0, "-37",
-__LINE__,0x80000000,12,34,0x80000000,11,34,0x80000000, 9,34,0x80000000,11,34,0x80000000,10,34, "-312413231122",
-__LINE__,0xffffcd5f, 6,0,0xffff85f7, 6,0,0xfffcedbf, 6,0,0xffff85f7, 6,0,0xffeaca77, 6,0, "-31241w",
-__LINE__,0xfffe6af5, 7,0,0xfffb3ba3, 7,0,0xffcedbed, 7,0,0xfffb3ba3, 7,0,0xfdd89013, 7,0, "-312413",
-__LINE__,0xffffcd5f, 6,0,0xffff85f7, 6,0,0xfffcedbf, 6,0,0xffff85f7, 6,0,0xffeaca77, 6,0, "-31241",
-__LINE__,0xfffffffd, 2,0,0xe88fc4ee,10,0,0x6cdceede,10,0,0xe88fc4ee,10,0,0x157981ce,10,0, "-393231122",
-__LINE__,0xfffffffd, 2,0,0xffffffd9, 3,0,0xffffffc7, 3,0,0xffffffd9, 3,0,0xffffffa9, 3,0, "-39w",
-__LINE__,0xfffffffd, 2,0,0xfffffe77, 4,0,0xfffffc6d, 4,0,0xfffffe77, 4,0,0xfffff727, 4,0, "-393",
-__LINE__,0xfffffffd, 2,0,0xffffffd9, 3,0,0xffffffc7, 3,0,0xffffffd9, 3,0,0xffffffa9, 3,0, "-39",
-__LINE__,0xff92cdae, 9,0,0xfe04eeee, 9,0,0xccdceede, 9,0,0xfe04eeee, 9,0,0x2b1013ce, 9,0, "-33231122",
-__LINE__,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0, "-3w",
-__LINE__,0xffffffe5, 3,0,0xffffffdf, 3,0,0xffffffcd, 3,0,0xffffffdf, 3,0,0xffffffaf, 3,0, "-33",
-__LINE__,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0,0xfffffffd, 2,0, "-3",
-__LINE__,0xfe12cdae,10,0,0xf5acb3ee,10,0,0x8cdceede,10,0,0xf5acb3ee,10,0,0x111128ce,10,0, "-173231122",
-__LINE__,0xfffffff1, 3,0,0xffffffef, 3,0,0xffffffe9, 3,0,0xffffffef, 3,0,0xffffffdf, 3,0, "-17w",
-__LINE__,0xffffff85, 4,0,0xffffff53, 4,0,0xfffffe8d, 4,0,0xffffff53, 4,0,0xfffffca3, 4,0, "-173",
-__LINE__,0xfffffff1, 3,0,0xffffffef, 3,0,0xffffffe9, 3,0,0xffffffef, 3,0,0xffffffdf, 3,0, "-17",
-__LINE__,0xabd2cdae,13,0,0x80000000,12,34,0x80000000,12,34,0x80000000,12,34,0x80000000, 9,34, "-112413231122",
-__LINE__,0xffffed5f, 6,0,0xffffd417, 6,0,0xfffeedbf, 6,0,0xffffd417, 6,0,0xfff8bc97, 6,0, "-11241w",
-__LINE__,0xffff6af5, 7,0,0xfffe48e3, 7,0,0xffeedbed, 7,0,0xfffe48e3, 7,0,0xff432753, 7,0, "-112413",
-__LINE__,0xffffed5f, 6,0,0xffffd417, 6,0,0xfffeedbf, 6,0,0xffffd417, 6,0,0xfff8bc97, 6,0, "-11241",
-__LINE__,0xffffffff, 2,0,0xf47b86ee,10,0,0x6cdceede,10,0,0xf47b86ee,10,0,0x5399c3ce,10,0, "-193231122",
-__LINE__,0xffffffff, 2,0,0xffffffed, 3,0,0xffffffe7, 3,0,0xffffffed, 3,0,0xffffffdd, 3,0, "-19w",
-__LINE__,0xffffffff, 2,0,0xffffff3f, 4,0,0xfffffe6d, 4,0,0xffffff3f, 4,0,0xfffffc6f, 4,0, "-193",
-__LINE__,0xffffffff, 2,0,0xffffffed, 3,0,0xffffffe7, 3,0,0xffffffed, 3,0,0xffffffdd, 3,0, "-19",
-__LINE__,0xffd2cdae, 9,0,0xff361bee, 9,0,0xecdceede, 9,0,0xff361bee, 9,0,0xe88778ce, 9,0, "-13231122",
-__LINE__,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0, "-1w",
-__LINE__,0xfffffff5, 3,0,0xfffffff3, 3,0,0xffffffed, 3,0,0xfffffff3, 3,0,0xffffffe3, 3,0, "-13",
-__LINE__,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0,0xffffffff, 2,0, "-1",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0xa73231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000000a7, 4,0,0x000000a7, 4,0,0x00000000, 1,0, "0xa7w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000a73, 5,0,0x00000a73, 5,0,0x00000000, 1,0, "0xa73",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000000a7, 4,0,0x000000a7, 4,0,0x00000000, 1,0, "0xa7",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0xa12413231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000a1241, 7,0,0x000a1241, 7,0,0x00000000, 1,0, "0xa1241w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00a12413, 8,0,0x00a12413, 8,0,0x00000000, 1,0, "0xa12413",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000a1241, 7,0,0x000a1241, 7,0,0x00000000, 1,0, "0xa1241",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0xa93231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000000a9, 4,0,0x000000a9, 4,0,0x00000000, 1,0, "0xa9w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000a93, 5,0,0x00000a93, 5,0,0x00000000, 1,0, "0xa93",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000000a9, 4,0,0x000000a9, 4,0,0x00000000, 1,0, "0xa9",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0xa3231122,10,0,0xa3231122,10,0,0x00000000, 1,0, "0xa3231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x0000000a, 3,0,0x0000000a, 3,0,0x00000000, 1,0, "0xaw",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x000000a3, 4,0,0x000000a3, 4,0,0x00000000, 1,0, "0xa3",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x0000000a, 3,0,0x0000000a, 3,0,0x00000000, 1,0, "0xa",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0x773231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000077, 4,0,0x00000077, 4,0,0x00000000, 1,0, "0x77w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000773, 5,0,0x00000773, 5,0,0x00000000, 1,0, "0x773",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000077, 4,0,0x00000077, 4,0,0x00000000, 1,0, "0x77",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0x712413231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00071241, 7,0,0x00071241, 7,0,0x00000000, 1,0, "0x71241w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00712413, 8,0,0x00712413, 8,0,0x00000000, 1,0, "0x712413",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00071241, 7,0,0x00071241, 7,0,0x00000000, 1,0, "0x71241",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x93231122,11,0,0x93231122,11,0,0x00000000, 1,0, "0x793231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000079, 4,0,0x00000079, 4,0,0x00000000, 1,0, "0x79w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000793, 5,0,0x00000793, 5,0,0x00000000, 1,0, "0x793",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000079, 4,0,0x00000079, 4,0,0x00000000, 1,0, "0x79",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x73231122,10,0,0x73231122,10,0,0x00000000, 1,0, "0x73231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000007, 3,0,0x00000007, 3,0,0x00000000, 1,0, "0x7w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000073, 4,0,0x00000073, 4,0,0x00000000, 1,0, "0x73",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000007, 3,0,0x00000007, 3,0,0x00000000, 1,0, "0x7",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x73231122,11,0,0x73231122,11,0,0x00000000, 1,0, "0x373231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000037, 4,0,0x00000037, 4,0,0x00000000, 1,0, "0x37w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000373, 5,0,0x00000373, 5,0,0x00000000, 1,0, "0x373",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000037, 4,0,0x00000037, 4,0,0x00000000, 1,0, "0x37",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,10,34,0x7fffffff,10,34,0x00000000, 1,0, "0x312413231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00031241, 7,0,0x00031241, 7,0,0x00000000, 1,0, "0x31241w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00312413, 8,0,0x00312413, 8,0,0x00000000, 1,0, "0x312413",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00031241, 7,0,0x00031241, 7,0,0x00000000, 1,0, "0x31241",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x93231122,11,0,0x93231122,11,0,0x00000000, 1,0, "0x393231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000039, 4,0,0x00000039, 4,0,0x00000000, 1,0, "0x39w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000393, 5,0,0x00000393, 5,0,0x00000000, 1,0, "0x393",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000039, 4,0,0x00000039, 4,0,0x00000000, 1,0, "0x39",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x33231122,10,0,0x33231122,10,0,0x00000000, 1,0, "0x33231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000003, 3,0,0x00000003, 3,0,0x00000000, 1,0, "0x3w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000033, 4,0,0x00000033, 4,0,0x00000000, 1,0, "0x33",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000003, 3,0,0x00000003, 3,0,0x00000000, 1,0, "0x3",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x73231122,11,0,0x73231122,11,0,0x00000000, 1,0, "0x173231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000017, 4,0,0x00000017, 4,0,0x00000000, 1,0, "0x17w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000173, 5,0,0x00000173, 5,0,0x00000000, 1,0, "0x173",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000017, 4,0,0x00000017, 4,0,0x00000000, 1,0, "0x17",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x7fffffff,13,34,0x7fffffff,13,34,0x00000000, 1,0, "0x112413231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00011241, 7,0,0x00011241, 7,0,0x00000000, 1,0, "0x11241w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00112413, 8,0,0x00112413, 8,0,0x00000000, 1,0, "0x112413",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00011241, 7,0,0x00011241, 7,0,0x00000000, 1,0, "0x11241",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x93231122,11,0,0x93231122,11,0,0x00000000, 1,0, "0x193231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000019, 4,0,0x00000019, 4,0,0x00000000, 1,0, "0x19w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000193, 5,0,0x00000193, 5,0,0x00000000, 1,0, "0x193",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000019, 4,0,0x00000019, 4,0,0x00000000, 1,0, "0x19",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x13231122,10,0,0x13231122,10,0,0x00000000, 1,0, "0x13231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000001, 3,0,0x00000001, 3,0,0x00000000, 1,0, "0x1w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000013, 4,0,0x00000013, 4,0,0x00000000, 1,0, "0x13",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000001, 3,0,0x00000001, 3,0,0x00000000, 1,0, "0x1",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 8,34, "0a73231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 3,0, "0a7w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b21, 4,0, "0a73",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010b, 3,0, "0a7",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 9,34, "0a12413231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 6,0, "0a1241w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x071c814d, 7,0, "0a12413",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x004604f9, 6,0, "0a1241",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 8,34, "0a93231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 3,0, "0a9w",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x00001b55, 4,0, "0a93",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000010d, 3,0, "0a9",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0xec11cdb2, 9,0, "0a3231122",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0, "0aw",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x00000107, 3,0, "0a3",
-__LINE__,0x00000000, 1,0,0x00000000, 1,0,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 2,0, "0a",
-__LINE__,0x07ed3252,10,0,0x2e169212,10,0,0x07ed3252,10,0,0x07ed3252,10,0,0xa94f9d32,10,0, "0773231122",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x0000003f, 3,0,0x0000003f, 3,0,0x000000bd, 3,0, "077w",
-__LINE__,0x000001fb, 4,0,0x00000305, 4,0,0x000001fb, 4,0,0x000001fb, 4,0,0x00001335, 4,0, "0773",
-__LINE__,0x0000003f, 3,0,0x0000004d, 3,0,0x0000003f, 3,0,0x0000003f, 3,0,0x000000bd, 3,0, "077",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff, 8,34, "0712413231122",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x000072a1, 6,0,0x000072a1, 6,0,0x003119c9, 6,0, "071241w",
-__LINE__,0x0003950b, 7,0,0x000adedd, 7,0,0x0003950b, 7,0,0x0003950b, 7,0,0x04fc9e6d, 7,0, "0712413",
-__LINE__,0x000072a1, 6,0,0x00011649, 6,0,0x000072a1, 6,0,0x000072a1, 6,0,0x003119c9, 6,0, "071241",
-__LINE__,0x00000007, 2,0,0x2f47bf12,10,0,0x00000007, 2,0,0x00000007, 2,0,0x7fffffff, 9,34, "0793231122",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000007, 2,0,0x00000007, 2,0,0x000000bf, 3,0, "079w",
-__LINE__,0x00000007, 2,0,0x00000319, 4,0,0x00000007, 2,0,0x00000007, 2,0,0x00001369, 4,0, "0793",
-__LINE__,0x00000007, 2,0,0x0000004f, 3,0,0x00000007, 2,0,0x00000007, 2,0,0x000000bf, 3,0, "079",
-__LINE__,0x00ed3252, 9,0,0x045d6b12, 9,0,0x00ed3252, 9,0,0x00ed3252, 9,0,0x7fffffff, 8,34, "073231122",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, "07w",
-__LINE__,0x0000003b, 3,0,0x00000049, 3,0,0x0000003b, 3,0,0x0000003b, 3,0,0x000000b9, 3,0, "073",
-__LINE__,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0,0x00000007, 2,0, "07",
-__LINE__,0x03ed3252,10,0,0x163f0e12,10,0,0x03ed3252,10,0,0x03ed3252,10,0,0x7fffffff, 8,34, "0373231122",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x0000001f, 3,0,0x0000001f, 3,0,0x00000055, 3,0, "037w",
-__LINE__,0x000000fb, 4,0,0x00000175, 4,0,0x000000fb, 4,0,0x000000fb, 4,0,0x000008a5, 4,0, "0373",
-__LINE__,0x0000001f, 3,0,0x00000025, 3,0,0x0000001f, 3,0,0x0000001f, 3,0,0x00000055, 3,0, "037",
-__LINE__,0x7fffffff,12,34,0x7fffffff,11,34,0x7fffffff,12,34,0x7fffffff,12,34,0x7fffffff,10,34, "0312413231122",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x000032a1, 6,0,0x000032a1, 6,0,0x00153589, 6,0, "031241w",
-__LINE__,0x0001950b, 7,0,0x0004c45d, 7,0,0x0001950b, 7,0,0x0001950b, 7,0,0x02276fed, 7,0, "0312413",
-__LINE__,0x000032a1, 6,0,0x00007a09, 6,0,0x000032a1, 6,0,0x000032a1, 6,0,0x00153589, 6,0, "031241",
-__LINE__,0x00000003, 2,0,0x17703b12,10,0,0x00000003, 2,0,0x00000003, 2,0,0xea867e32,10,0, "0393231122",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000003, 2,0,0x00000003, 2,0,0x00000057, 3,0, "039w",
-__LINE__,0x00000003, 2,0,0x00000189, 4,0,0x00000003, 2,0,0x00000003, 2,0,0x000008d9, 4,0, "0393",
-__LINE__,0x00000003, 2,0,0x00000027, 3,0,0x00000003, 2,0,0x00000003, 2,0,0x00000057, 3,0, "039",
-__LINE__,0x006d3252, 9,0,0x01fb1112, 9,0,0x006d3252, 9,0,0x006d3252, 9,0,0xd4efec32, 9,0, "033231122",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, "03w",
-__LINE__,0x0000001b, 3,0,0x00000021, 3,0,0x0000001b, 3,0,0x0000001b, 3,0,0x00000051, 3,0, "033",
-__LINE__,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0,0x00000003, 2,0, "03",
-__LINE__,0x01ed3252,10,0,0x0a534c12,10,0,0x01ed3252,10,0,0x01ed3252,10,0,0xeeeed732,10,0, "0173231122",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x0000000f, 3,0,0x0000000f, 3,0,0x00000021, 3,0, "017w",
-__LINE__,0x0000007b, 4,0,0x000000ad, 4,0,0x0000007b, 4,0,0x0000007b, 4,0,0x0000035d, 4,0, "0173",
-__LINE__,0x0000000f, 3,0,0x00000011, 3,0,0x0000000f, 3,0,0x0000000f, 3,0,0x00000021, 3,0, "017",
-__LINE__,0x542d3252,13,0,0x7fffffff,12,34,0x542d3252,13,0,0x542d3252,13,0,0x7fffffff, 9,34, "0112413231122",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x000012a1, 6,0,0x000012a1, 6,0,0x00074369, 6,0, "011241w",
-__LINE__,0x0000950b, 7,0,0x0001b71d, 7,0,0x0000950b, 7,0,0x0000950b, 7,0,0x00bcd8ad, 7,0, "0112413",
-__LINE__,0x000012a1, 6,0,0x00002be9, 6,0,0x000012a1, 6,0,0x000012a1, 6,0,0x00074369, 6,0, "011241",
-__LINE__,0x00000001, 2,0,0x0b847912,10,0,0x00000001, 2,0,0x00000001, 2,0,0xac663c32,10,0, "0193231122",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000001, 2,0,0x00000001, 2,0,0x00000023, 3,0, "019w",
-__LINE__,0x00000001, 2,0,0x000000c1, 4,0,0x00000001, 2,0,0x00000001, 2,0,0x00000391, 4,0, "0193",
-__LINE__,0x00000001, 2,0,0x00000013, 3,0,0x00000001, 2,0,0x00000001, 2,0,0x00000023, 3,0, "019",
-__LINE__,0x002d3252, 9,0,0x00c9e412, 9,0,0x002d3252, 9,0,0x002d3252, 9,0,0x17788732, 9,0, "013231122",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, "01w",
-__LINE__,0x0000000b, 3,0,0x0000000d, 3,0,0x0000000b, 3,0,0x0000000b, 3,0,0x0000001d, 3,0, "013",
-__LINE__,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0,0x00000001, 2,0, "01",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 8,34,0x00000000, 0,0,0x7fffffff, 7,34, "a73231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 2,0,0x00000000, 0,0,0x0000010b, 2,0, "a7w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a73, 3,0,0x00000000, 0,0,0x00001b21, 3,0, "a73",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a7, 2,0,0x00000000, 0,0,0x0000010b, 2,0, "a7",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 8,34,0x00000000, 0,0,0x7fffffff, 8,34, "a12413231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 5,0,0x00000000, 0,0,0x004604f9, 5,0, "a1241w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00a12413, 6,0,0x00000000, 0,0,0x071c814d, 6,0, "a12413",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000a1241, 5,0,0x00000000, 0,0,0x004604f9, 5,0, "a1241",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x7fffffff, 8,34,0x00000000, 0,0,0x7fffffff, 7,34, "a93231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 2,0,0x00000000, 0,0,0x0000010d, 2,0, "a9w",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x00000a93, 3,0,0x00000000, 0,0,0x00001b55, 3,0, "a93",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a9, 2,0,0x00000000, 0,0,0x0000010d, 2,0, "a9",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0xa3231122, 8,0,0x00000000, 0,0,0xec11cdb2, 8,0, "a3231122",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 1,0,0x00000000, 0,0,0x0000000a, 1,0, "aw",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x000000a3, 2,0,0x00000000, 0,0,0x00000107, 2,0, "a3",
-__LINE__,0x00000000, 0,0,0x00000000, 0,0,0x0000000a, 1,0,0x00000000, 0,0,0x0000000a, 1,0, "a",
-__LINE__,0x07ed3252, 9,0,0x2e169212, 9,0,0x7fffffff, 8,34,0x2e169212, 9,0,0xa94f9d32, 9,0, "773231122",
-__LINE__,0x0000003f, 2,0,0x0000004d, 2,0,0x00000077, 2,0,0x0000004d, 2,0,0x000000bd, 2,0, "77w",
-__LINE__,0x000001fb, 3,0,0x00000305, 3,0,0x00000773, 3,0,0x00000305, 3,0,0x00001335, 3,0, "773",
-__LINE__,0x0000003f, 2,0,0x0000004d, 2,0,0x00000077, 2,0,0x0000004d, 2,0,0x000000bd, 2,0, "77",
-__LINE__,0x7fffffff,11,34,0x7fffffff,10,34,0x7fffffff, 8,34,0x7fffffff,10,34,0x7fffffff, 7,34, "712413231122",
-__LINE__,0x000072a1, 5,0,0x00011649, 5,0,0x00071241, 5,0,0x00011649, 5,0,0x003119c9, 5,0, "71241w",
-__LINE__,0x0003950b, 6,0,0x000adedd, 6,0,0x00712413, 6,0,0x000adedd, 6,0,0x04fc9e6d, 6,0, "712413",
-__LINE__,0x000072a1, 5,0,0x00011649, 5,0,0x00071241, 5,0,0x00011649, 5,0,0x003119c9, 5,0, "71241",
-__LINE__,0x00000007, 1,0,0x2f47bf12, 9,0,0x93231122, 9,0,0x2f47bf12, 9,0,0x7fffffff, 8,34, "793231122",
-__LINE__,0x00000007, 1,0,0x0000004f, 2,0,0x00000079, 2,0,0x0000004f, 2,0,0x000000bf, 2,0, "79w",
-__LINE__,0x00000007, 1,0,0x00000319, 3,0,0x00000793, 3,0,0x00000319, 3,0,0x00001369, 3,0, "793",
-__LINE__,0x00000007, 1,0,0x0000004f, 2,0,0x00000079, 2,0,0x0000004f, 2,0,0x000000bf, 2,0, "79",
-__LINE__,0x00ed3252, 8,0,0x045d6b12, 8,0,0x73231122, 8,0,0x045d6b12, 8,0,0x7fffffff, 7,34, "73231122",
-__LINE__,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0, "7w",
-__LINE__,0x0000003b, 2,0,0x00000049, 2,0,0x00000073, 2,0,0x00000049, 2,0,0x000000b9, 2,0, "73",
-__LINE__,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0,0x00000007, 1,0, "7",
-__LINE__,0x03ed3252, 9,0,0x163f0e12, 9,0,0x73231122, 9,0,0x163f0e12, 9,0,0x7fffffff, 7,34, "373231122",
-__LINE__,0x0000001f, 2,0,0x00000025, 2,0,0x00000037, 2,0,0x00000025, 2,0,0x00000055, 2,0, "37w",
-__LINE__,0x000000fb, 3,0,0x00000175, 3,0,0x00000373, 3,0,0x00000175, 3,0,0x000008a5, 3,0, "373",
-__LINE__,0x0000001f, 2,0,0x00000025, 2,0,0x00000037, 2,0,0x00000025, 2,0,0x00000055, 2,0, "37",
-__LINE__,0x7fffffff,11,34,0x7fffffff,10,34,0x7fffffff, 8,34,0x7fffffff,10,34,0x7fffffff, 9,34, "312413231122",
-__LINE__,0x000032a1, 5,0,0x00007a09, 5,0,0x00031241, 5,0,0x00007a09, 5,0,0x00153589, 5,0, "31241w",
-__LINE__,0x0001950b, 6,0,0x0004c45d, 6,0,0x00312413, 6,0,0x0004c45d, 6,0,0x02276fed, 6,0, "312413",
-__LINE__,0x000032a1, 5,0,0x00007a09, 5,0,0x00031241, 5,0,0x00007a09, 5,0,0x00153589, 5,0, "31241",
-__LINE__,0x00000003, 1,0,0x17703b12, 9,0,0x93231122, 9,0,0x17703b12, 9,0,0xea867e32, 9,0, "393231122",
-__LINE__,0x00000003, 1,0,0x00000027, 2,0,0x00000039, 2,0,0x00000027, 2,0,0x00000057, 2,0, "39w",
-__LINE__,0x00000003, 1,0,0x00000189, 3,0,0x00000393, 3,0,0x00000189, 3,0,0x000008d9, 3,0, "393",
-__LINE__,0x00000003, 1,0,0x00000027, 2,0,0x00000039, 2,0,0x00000027, 2,0,0x00000057, 2,0, "39",
-__LINE__,0x006d3252, 8,0,0x01fb1112, 8,0,0x33231122, 8,0,0x01fb1112, 8,0,0xd4efec32, 8,0, "33231122",
-__LINE__,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0, "3w",
-__LINE__,0x0000001b, 2,0,0x00000021, 2,0,0x00000033, 2,0,0x00000021, 2,0,0x00000051, 2,0, "33",
-__LINE__,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0,0x00000003, 1,0, "3",
-__LINE__,0x01ed3252, 9,0,0x0a534c12, 9,0,0x73231122, 9,0,0x0a534c12, 9,0,0xeeeed732, 9,0, "173231122",
-__LINE__,0x0000000f, 2,0,0x00000011, 2,0,0x00000017, 2,0,0x00000011, 2,0,0x00000021, 2,0, "17w",
-__LINE__,0x0000007b, 3,0,0x000000ad, 3,0,0x00000173, 3,0,0x000000ad, 3,0,0x0000035d, 3,0, "173",
-__LINE__,0x0000000f, 2,0,0x00000011, 2,0,0x00000017, 2,0,0x00000011, 2,0,0x00000021, 2,0, "17",
-__LINE__,0x542d3252,12,0,0x7fffffff,11,34,0x7fffffff,11,34,0x7fffffff,11,34,0x7fffffff, 8,34, "112413231122",
-__LINE__,0x000012a1, 5,0,0x00002be9, 5,0,0x00011241, 5,0,0x00002be9, 5,0,0x00074369, 5,0, "11241w",
-__LINE__,0x0000950b, 6,0,0x0001b71d, 6,0,0x00112413, 6,0,0x0001b71d, 6,0,0x00bcd8ad, 6,0, "112413",
-__LINE__,0x000012a1, 5,0,0x00002be9, 5,0,0x00011241, 5,0,0x00002be9, 5,0,0x00074369, 5,0, "11241",
-__LINE__,0x00000001, 1,0,0x0b847912, 9,0,0x93231122, 9,0,0x0b847912, 9,0,0xac663c32, 9,0, "193231122",
-__LINE__,0x00000001, 1,0,0x00000013, 2,0,0x00000019, 2,0,0x00000013, 2,0,0x00000023, 2,0, "19w",
-__LINE__,0x00000001, 1,0,0x000000c1, 3,0,0x00000193, 3,0,0x000000c1, 3,0,0x00000391, 3,0, "193",
-__LINE__,0x00000001, 1,0,0x00000013, 2,0,0x00000019, 2,0,0x00000013, 2,0,0x00000023, 2,0, "19",
-__LINE__,0x002d3252, 8,0,0x00c9e412, 8,0,0x13231122, 8,0,0x00c9e412, 8,0,0x17788732, 8,0, "13231122",
-__LINE__,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0, "1w",
-__LINE__,0x0000000b, 2,0,0x0000000d, 2,0,0x00000013, 2,0,0x0000000d, 2,0,0x0000001d, 2,0, "13",
-__LINE__,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0,0x00000001, 1,0, "1",
-0
-}
-;
diff --git a/newlib/libm/test/j0_vec.c b/newlib/libm/test/j0_vec.c
deleted file mode 100644
index 834f88370..000000000
--- a/newlib/libm/test/j0_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type j0_vec[] = {
-{63, 0,123,__LINE__, 0x3fe579eb, 0x607c7c44, 0xbff33333, 0x33333333},			/* 0.67113=f(-1.20000)*/
-{64, 0,123,__LINE__, 0x3fe5a2a2, 0x4bc89e06, 0xbff30a3d, 0x70a3d70a},			/* 0.67610=f(-1.19000)*/
-{64, 0,123,__LINE__, 0x3fe5cb22, 0xc94f81ce, 0xbff2e147, 0xae147ae1},			/* 0.68104=f(-1.18000)*/
-{64, 0,123,__LINE__, 0x3fe5f36c, 0x164082d9, 0xbff2b851, 0xeb851eb8},			/* 0.68596=f(-1.17000)*/
-{64, 0,123,__LINE__, 0x3fe61b7d, 0x70c07b77, 0xbff28f5c, 0x28f5c28f},			/* 0.69085=f(-1.16000)*/
-{64, 0,123,__LINE__, 0x3fe64356, 0x17eddc85, 0xbff26666, 0x66666666},			/* 0.69571=f(-1.15000)*/
-{64, 0,123,__LINE__, 0x3fe66af5, 0x4be4bfcc, 0xbff23d70, 0xa3d70a3d},			/* 0.70055=f(-1.14000)*/
-{64, 0,123,__LINE__, 0x3fe6925a, 0x4dc2f55a, 0xbff2147a, 0xe147ae14},			/* 0.70536=f(-1.13000)*/
-{63, 0,123,__LINE__, 0x3fe6b984, 0x5fac0b72, 0xbff1eb85, 0x1eb851eb},			/* 0.71014=f(-1.12000)*/
-{62, 0,123,__LINE__, 0x3fe6e072, 0xc4cd5149, 0xbff1c28f, 0x5c28f5c2},			/* 0.71489=f(-1.11000)*/
-{63, 0,123,__LINE__, 0x3fe70724, 0xc161d44e, 0xbff19999, 0x99999999},			/* 0.71962=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe72d99, 0x9ab657eb, 0xbff170a3, 0xd70a3d70},			/* 0.72431=f(-1.09000)*/
-{62, 0,123,__LINE__, 0x3fe753d0, 0x972d47b0, 0xbff147ae, 0x147ae147},			/* 0.72898=f(-1.08000)*/
-{64, 0,123,__LINE__, 0x3fe779c8, 0xfe42a3da, 0xbff11eb8, 0x51eb851e},			/* 0.73361=f(-1.07000)*/
-{63, 0,123,__LINE__, 0x3fe79f82, 0x188fe7fe, 0xbff0f5c2, 0x8f5c28f5},			/* 0.73822=f(-1.06000)*/
-{64, 0,123,__LINE__, 0x3fe7c4fb, 0x2fcfebf2, 0xbff0cccc, 0xcccccccc},			/* 0.74279=f(-1.05000)*/
-{64, 0,123,__LINE__, 0x3fe7ea33, 0x8ee2bead, 0xbff0a3d7, 0x0a3d70a3},			/* 0.74733=f(-1.04000)*/
-{64, 0,123,__LINE__, 0x3fe80f2a, 0x81d17b34, 0xbff07ae1, 0x47ae147a},			/* 0.75185=f(-1.03000)*/
-{60, 0,123,__LINE__, 0x3fe833df, 0x55d21757, 0xbff051eb, 0x851eb851},			/* 0.75633=f(-1.02000)*/
-{64, 0,123,__LINE__, 0x3fe85851, 0x594b2c4d, 0xbff028f5, 0xc28f5c28},			/* 0.76078=f(-1.01000)*/
-{64, 0,123,__LINE__, 0x3fe87c7f, 0xdbd7b8f0, 0xbfefffff, 0xfffffffe},			/* 0.76519=f(-0.01000)*/
-{64, 0,123,__LINE__, 0x3fe8a06a, 0x2e4addb6, 0xbfefae14, 0x7ae147ac},			/* 0.76958=f(-0.99000)*/
-{64, 0,123,__LINE__, 0x3fe8c40f, 0xa2b3921d, 0xbfef5c28, 0xf5c28f5a},			/* 0.77393=f(-0.98000)*/
-{64, 0,123,__LINE__, 0x3fe8e76f, 0x8c6053a3, 0xbfef0a3d, 0x70a3d708},			/* 0.77825=f(-0.97000)*/
-{64, 0,123,__LINE__, 0x3fe90a89, 0x3fe2ce0d, 0xbfeeb851, 0xeb851eb6},			/* 0.78253=f(-0.96000)*/
-{64, 0,123,__LINE__, 0x3fe92d5c, 0x13137d0e, 0xbfee6666, 0x66666664},			/* 0.78678=f(-0.95000)*/
-{64, 0,123,__LINE__, 0x3fe94fe7, 0x5d154716, 0xbfee147a, 0xe147ae12},			/* 0.79100=f(-0.94000)*/
-{64, 0,123,__LINE__, 0x3fe9722a, 0x76591154, 0xbfedc28f, 0x5c28f5c0},			/* 0.79518=f(-0.93000)*/
-{64, 0,123,__LINE__, 0x3fe99424, 0xb8a14cb4, 0xbfed70a3, 0xd70a3d6e},			/* 0.79933=f(-0.92000)*/
-{64, 0,123,__LINE__, 0x3fe9b5d5, 0x7f057bf2, 0xbfed1eb8, 0x51eb851c},			/* 0.80344=f(-0.91000)*/
-{64, 0,123,__LINE__, 0x3fe9d73c, 0x25f5b27a, 0xbfeccccc, 0xccccccca},			/* 0.80752=f(-0.90000)*/
-{64, 0,123,__LINE__, 0x3fe9f858, 0x0b3e0c30, 0xbfec7ae1, 0x47ae1478},			/* 0.81156=f(-0.89000)*/
-{64, 0,123,__LINE__, 0x3fea1928, 0x8e0a1de9, 0xbfec28f5, 0xc28f5c26},			/* 0.81557=f(-0.88000)*/
-{64, 0,123,__LINE__, 0x3fea39ad, 0x0ee85e9a, 0xbfebd70a, 0x3d70a3d4},			/* 0.81954=f(-0.87000)*/
-{64, 0,123,__LINE__, 0x3fea59e4, 0xefcd8915, 0xbfeb851e, 0xb851eb82},			/* 0.82347=f(-0.86000)*/
-{64, 0,123,__LINE__, 0x3fea79cf, 0x9417f64c, 0xbfeb3333, 0x33333330},			/* 0.82736=f(-0.85000)*/
-{64, 0,123,__LINE__, 0x3fea996c, 0x6092f01d, 0xbfeae147, 0xae147ade},			/* 0.83122=f(-0.84000)*/
-{64, 0,123,__LINE__, 0x3feab8ba, 0xbb79fc54, 0xbfea8f5c, 0x28f5c28c},			/* 0.83504=f(-0.83000)*/
-{64, 0,123,__LINE__, 0x3fead7ba, 0x0c7c201a, 0xbfea3d70, 0xa3d70a3a},			/* 0.83883=f(-0.82000)*/
-{64, 0,123,__LINE__, 0x3feaf669, 0xbcbf1b8d, 0xbfe9eb85, 0x1eb851e8},			/* 0.84257=f(-0.81000)*/
-{64, 0,123,__LINE__, 0x3feb14c9, 0x36e29d87, 0xbfe99999, 0x99999996},			/* 0.84628=f(-0.80000)*/
-{63, 0,123,__LINE__, 0x3feb32d7, 0xe7036f70, 0xbfe947ae, 0x147ae144},			/* 0.84995=f(-0.79000)*/
-{64, 0,123,__LINE__, 0x3feb5095, 0x3abe9920, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.85358=f(-0.78000)*/
-{64, 0,123,__LINE__, 0x3feb6e00, 0xa1347ca2, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.85717=f(-0.77000)*/
-{64, 0,123,__LINE__, 0x3feb8b19, 0x8b0be9e0, 0xbfe851eb, 0x851eb84e},			/* 0.86072=f(-0.76000)*/
-{64, 0,123,__LINE__, 0x3feba7df, 0x6a752a1a, 0xbfe7ffff, 0xfffffffc},			/* 0.86424=f(-0.75000)*/
-{64, 0,123,__LINE__, 0x3febc451, 0xb32d0313, 0xbfe7ae14, 0x7ae147aa},			/* 0.86771=f(-0.74000)*/
-{64, 0,123,__LINE__, 0x3febe06f, 0xda7fb1f1, 0xbfe75c28, 0xf5c28f58},			/* 0.87114=f(-0.73000)*/
-{64, 0,123,__LINE__, 0x3febfc39, 0x574bddb1, 0xbfe70a3d, 0x70a3d706},			/* 0.87453=f(-0.72000)*/
-{64, 0,123,__LINE__, 0x3fec17ad, 0xa2058121, 0xbfe6b851, 0xeb851eb4},			/* 0.87789=f(-0.71000)*/
-{64, 0,123,__LINE__, 0x3fec32cc, 0x34b8cc5b, 0xbfe66666, 0x66666662},			/* 0.88120=f(-0.70000)*/
-{64, 0,123,__LINE__, 0x3fec4d94, 0x8b0cfd9c, 0xbfe6147a, 0xe147ae10},			/* 0.88447=f(-0.69000)*/
-{62, 0,123,__LINE__, 0x3fec6806, 0x22473179, 0xbfe5c28f, 0x5c28f5be},			/* 0.88769=f(-0.68000)*/
-{64, 0,123,__LINE__, 0x3fec8220, 0x794d2a5b, 0xbfe570a3, 0xd70a3d6c},			/* 0.89088=f(-0.67000)*/
-{64, 0,123,__LINE__, 0x3fec9be3, 0x10a80f2d, 0xbfe51eb8, 0x51eb851a},			/* 0.89402=f(-0.66000)*/
-{60, 0,123,__LINE__, 0x3fecb54d, 0x6a872137, 0xbfe4cccc, 0xccccccc8},			/* 0.89713=f(-0.65000)*/
-{63, 0,123,__LINE__, 0x3fecce5f, 0x0ac2690c, 0xbfe47ae1, 0x47ae1476},			/* 0.90019=f(-0.64000)*/
-{64, 0,123,__LINE__, 0x3fece717, 0x76dd5a82, 0xbfe428f5, 0xc28f5c24},			/* 0.90320=f(-0.63000)*/
-{64, 0,123,__LINE__, 0x3fecff76, 0x36096fa9, 0xbfe3d70a, 0x3d70a3d2},			/* 0.90618=f(-0.62000)*/
-{64, 0,123,__LINE__, 0x3fed177a, 0xd128ba9e, 0xbfe3851e, 0xb851eb80},			/* 0.90911=f(-0.61000)*/
-{64, 0,123,__LINE__, 0x3fed2f24, 0xd2d06e4f, 0xbfe33333, 0x3333332e},			/* 0.91200=f(-0.60000)*/
-{64, 0,123,__LINE__, 0x3fed4673, 0xc74b5df2, 0xbfe2e147, 0xae147adc},			/* 0.91485=f(-0.59000)*/
-{64, 0,123,__LINE__, 0x3fed5d67, 0x3c9c7358, 0xbfe28f5c, 0x28f5c28a},			/* 0.91765=f(-0.58000)*/
-{64, 0,123,__LINE__, 0x3fed73fe, 0xc2811bd3, 0xbfe23d70, 0xa3d70a38},			/* 0.92040=f(-0.57000)*/
-{64, 0,123,__LINE__, 0x3fed8a39, 0xea73abdc, 0xbfe1eb85, 0x1eb851e6},			/* 0.92312=f(-0.56000)*/
-{64, 0,123,__LINE__, 0x3feda018, 0x47adb932, 0xbfe19999, 0x99999994},			/* 0.92579=f(-0.55000)*/
-{64, 0,123,__LINE__, 0x3fedb599, 0x6f2a6b98, 0xbfe147ae, 0x147ae142},			/* 0.92841=f(-0.54000)*/
-{64, 0,123,__LINE__, 0x3fedcabc, 0xf7a8c405, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.93099=f(-0.53000)*/
-{64, 0,123,__LINE__, 0x3feddf82, 0x79adda37, 0xbfe0a3d7, 0x0a3d709e},			/* 0.93353=f(-0.52000)*/
-{64, 0,123,__LINE__, 0x3fedf3e9, 0x8f8710bb, 0xbfe051eb, 0x851eb84c},			/* 0.93602=f(-0.51000)*/
-{64, 0,123,__LINE__, 0x3fee07f1, 0xd54c3f36, 0xbfdfffff, 0xfffffff4},			/* 0.93846=f(-0.50000)*/
-{64, 0,123,__LINE__, 0x3fee1b9a, 0xe8e1d303, 0xbfdf5c28, 0xf5c28f50},			/* 0.94086=f(-0.49000)*/
-{64, 0,123,__LINE__, 0x3fee2ee4, 0x69fae606, 0xbfdeb851, 0xeb851eac},			/* 0.94322=f(-0.48000)*/
-{64, 0,123,__LINE__, 0x3fee41cd, 0xfa1b4bad, 0xbfde147a, 0xe147ae08},			/* 0.94553=f(-0.47000)*/
-{64, 0,123,__LINE__, 0x3fee5457, 0x3c99941a, 0xbfdd70a3, 0xd70a3d64},			/* 0.94779=f(-0.46000)*/
-{62, 0,123,__LINE__, 0x3fee667f, 0xd6a10561, 0xbfdccccc, 0xccccccc0},			/* 0.95001=f(-0.45000)*/
-{64, 0,123,__LINE__, 0x3fee7847, 0x6f338ada, 0xbfdc28f5, 0xc28f5c1c},			/* 0.95218=f(-0.44000)*/
-{64, 0,123,__LINE__, 0x3fee89ad, 0xaf2b9a61, 0xbfdb851e, 0xb851eb78},			/* 0.95430=f(-0.43000)*/
-{64, 0,123,__LINE__, 0x3fee9ab2, 0x413e0fad, 0xbfdae147, 0xae147ad4},			/* 0.95638=f(-0.42000)*/
-{64, 0,123,__LINE__, 0x3feeab54, 0xd1fbfd72, 0xbfda3d70, 0xa3d70a30},			/* 0.95841=f(-0.41000)*/
-{64, 0,123,__LINE__, 0x3feebb95, 0x0fd47480, 0xbfd99999, 0x9999998c},			/* 0.96039=f(-0.40000)*/
-{64, 0,123,__LINE__, 0x3feecb72, 0xab1640a2, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.96233=f(-0.39000)*/
-{64, 0,123,__LINE__, 0x3feedaed, 0x55f19b65, 0xbfd851eb, 0x851eb844},			/* 0.96422=f(-0.38000)*/
-{64, 0,123,__LINE__, 0x3feeea04, 0xc479d485, 0xbfd7ae14, 0x7ae147a0},			/* 0.96606=f(-0.37000)*/
-{64, 0,123,__LINE__, 0x3feef8b8, 0xaca6f030, 0xbfd70a3d, 0x70a3d6fc},			/* 0.96786=f(-0.36000)*/
-{64, 0,123,__LINE__, 0x3fef0708, 0xc6573ae6, 0xbfd66666, 0x66666658},			/* 0.96960=f(-0.35000)*/
-{64, 0,123,__LINE__, 0x3fef14f4, 0xcb50d313, 0xbfd5c28f, 0x5c28f5b4},			/* 0.97130=f(-0.34000)*/
-{64, 0,123,__LINE__, 0x3fef227c, 0x77432832, 0xbfd51eb8, 0x51eb8510},			/* 0.97295=f(-0.33000)*/
-{64, 0,123,__LINE__, 0x3fef2f9f, 0x87c86f9f, 0xbfd47ae1, 0x47ae146c},			/* 0.97456=f(-0.32000)*/
-{64, 0,123,__LINE__, 0x3fef3c5d, 0xbc670ee5, 0xbfd3d70a, 0x3d70a3c8},			/* 0.97611=f(-0.31000)*/
-{64, 0,123,__LINE__, 0x3fef48b6, 0xd692fb9f, 0xbfd33333, 0x33333324},			/* 0.97762=f(-0.30000)*/
-{64, 0,123,__LINE__, 0x3fef54aa, 0x99af10ca, 0xbfd28f5c, 0x28f5c280},			/* 0.97908=f(-0.29000)*/
-{64, 0,123,__LINE__, 0x3fef6038, 0xcb0e599c, 0xbfd1eb85, 0x1eb851dc},			/* 0.98049=f(-0.28000)*/
-{64, 0,123,__LINE__, 0x3fef6b61, 0x31f551c4, 0xbfd147ae, 0x147ae138},			/* 0.98185=f(-0.27000)*/
-{64, 0,123,__LINE__, 0x3fef7623, 0x979b1b0a, 0xbfd0a3d7, 0x0a3d7094},			/* 0.98317=f(-0.26000)*/
-{64, 0,123,__LINE__, 0x3fef807f, 0xc72aa866, 0xbfcfffff, 0xffffffe0},			/* 0.98443=f(-0.25000)*/
-{64, 0,123,__LINE__, 0x3fef8a75, 0x8dc3de56, 0xbfceb851, 0xeb851e98},			/* 0.98565=f(-0.24000)*/
-{64, 0,123,__LINE__, 0x3fef9404, 0xba7ca8a2, 0xbfcd70a3, 0xd70a3d50},			/* 0.98681=f(-0.23000)*/
-{64, 0,123,__LINE__, 0x3fef9d2d, 0x1e620558, 0xbfcc28f5, 0xc28f5c08},			/* 0.98793=f(-0.22000)*/
-{64, 0,123,__LINE__, 0x3fefa5ee, 0x8c790524, 0xbfcae147, 0xae147ac0},			/* 0.98900=f(-0.21000)*/
-{64, 0,123,__LINE__, 0x3fefae48, 0xd9bfc0d5, 0xbfc99999, 0x99999978},			/* 0.99002=f(-0.20000)*/
-{64, 0,123,__LINE__, 0x3fefb63b, 0xdd2e4434, 0xbfc851eb, 0x851eb830},			/* 0.99099=f(-0.19000)*/
-{64, 0,123,__LINE__, 0x3fefbdc7, 0x6fb76e04, 0xbfc70a3d, 0x70a3d6e8},			/* 0.99191=f(-0.18000)*/
-{64, 0,123,__LINE__, 0x3fefc4eb, 0x6c49c537, 0xbfc5c28f, 0x5c28f5a0},			/* 0.99278=f(-0.17000)*/
-{64, 0,123,__LINE__, 0x3fefcba7, 0xafd04359, 0xbfc47ae1, 0x47ae1458},			/* 0.99361=f(-0.16000)*/
-{64, 0,123,__LINE__, 0x3fefd1fc, 0x19331411, 0xbfc33333, 0x33333310},			/* 0.99438=f(-0.15000)*/
-{64, 0,123,__LINE__, 0x3fefd7e8, 0x895849e4, 0xbfc1eb85, 0x1eb851c8},			/* 0.99510=f(-0.14000)*/
-{64, 0,123,__LINE__, 0x3fefdd6c, 0xe32487fa, 0xbfc0a3d7, 0x0a3d7080},			/* 0.99577=f(-0.13000)*/
-{64, 0,123,__LINE__, 0x3fefe289, 0x0b7ba117, 0xbfbeb851, 0xeb851e71},			/* 0.99640=f(-0.12000)*/
-{64, 0,123,__LINE__, 0x3fefe73c, 0xe9412b9d, 0xbfbc28f5, 0xc28f5be2},			/* 0.99697=f(-0.11000)*/
-{64, 0,123,__LINE__, 0x3fefeb88, 0x65590ab3, 0xbfb99999, 0x99999953},			/* 0.99750=f(-0.00100)*/
-{64, 0,123,__LINE__, 0x3fefef6b, 0x6aa7ec76, 0xbfb70a3d, 0x70a3d6c4},			/* 0.99797=f(-0.09000)*/
-{64, 0,123,__LINE__, 0x3feff2e5, 0xe613bd35, 0xbfb47ae1, 0x47ae1435},			/* 0.99840=f(-0.08000)*/
-{64, 0,123,__LINE__, 0x3feff5f7, 0xc6840fcb, 0xbfb1eb85, 0x1eb851a6},			/* 0.99877=f(-0.07000)*/
-{64, 0,123,__LINE__, 0x3feff8a0, 0xfce27af5, 0xbfaeb851, 0xeb851e2d},			/* 0.99910=f(-0.06000)*/
-{64, 0,123,__LINE__, 0x3feffae1, 0x7c1aebb8, 0xbfa99999, 0x9999990e},			/* 0.99937=f(-0.05000)*/
-{64, 0,123,__LINE__, 0x3feffcb9, 0x391beccd, 0xbfa47ae1, 0x47ae13ef},			/* 0.99960=f(-0.04000)*/
-{64, 0,123,__LINE__, 0x3feffe28, 0x2ad6e317, 0xbf9eb851, 0xeb851da0},			/* 0.99977=f(-0.03000)*/
-{64, 0,123,__LINE__, 0x3fefff2e, 0x4a403f11, 0xbf947ae1, 0x47ae1362},			/* 0.99990=f(-0.02000)*/
-{64, 0,123,__LINE__, 0x3fefffcb, 0x924fa353, 0xbf847ae1, 0x47ae1249},			/* 0.99997=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3fefffcb, 0x924fa353, 0x3f847ae1, 0x47ae16ad},			/* 0.99997=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3fefff2e, 0x4a403f11, 0x3f947ae1, 0x47ae1594},			/* 0.99990=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3feffe28, 0x2ad6e317, 0x3f9eb851, 0xeb851fd2},			/* 0.99977=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3feffcb9, 0x391beccd, 0x3fa47ae1, 0x47ae1508},			/* 0.99960=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3feffae1, 0x7c1aebb7, 0x3fa99999, 0x99999a27},			/* 0.99937=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3feff8a0, 0xfce27af5, 0x3faeb851, 0xeb851f46},			/* 0.99910=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3feff5f7, 0xc6840fcb, 0x3fb1eb85, 0x1eb85232},			/* 0.99877=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3feff2e5, 0xe613bd34, 0x3fb47ae1, 0x47ae14c1},			/* 0.99840=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fefef6b, 0x6aa7ec75, 0x3fb70a3d, 0x70a3d750},			/* 0.99797=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fefeb88, 0x65590ab3, 0x3fb99999, 0x999999df},			/* 0.99750=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fefe73c, 0xe9412b9c, 0x3fbc28f5, 0xc28f5c6e},			/* 0.99697=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fefe289, 0x0b7ba115, 0x3fbeb851, 0xeb851efd},			/* 0.99640=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fefdd6c, 0xe32487fa, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.99577=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fefd7e8, 0x895849e2, 0x3fc1eb85, 0x1eb8520e},			/* 0.99510=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fefd1fc, 0x19331410, 0x3fc33333, 0x33333356},			/* 0.99438=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fefcba7, 0xafd04357, 0x3fc47ae1, 0x47ae149e},			/* 0.99361=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fefc4eb, 0x6c49c536, 0x3fc5c28f, 0x5c28f5e6},			/* 0.99278=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fefbdc7, 0x6fb76e02, 0x3fc70a3d, 0x70a3d72e},			/* 0.99191=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fefb63b, 0xdd2e4433, 0x3fc851eb, 0x851eb876},			/* 0.99099=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fefae48, 0xd9bfc0d3, 0x3fc99999, 0x999999be},			/* 0.99002=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fefa5ee, 0x8c790522, 0x3fcae147, 0xae147b06},			/* 0.98900=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fef9d2d, 0x1e620556, 0x3fcc28f5, 0xc28f5c4e},			/* 0.98793=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fef9404, 0xba7ca8a1, 0x3fcd70a3, 0xd70a3d96},			/* 0.98681=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fef8a75, 0x8dc3de54, 0x3fceb851, 0xeb851ede},			/* 0.98565=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fef807f, 0xc72aa862, 0x3fd00000, 0x00000013},			/* 0.98443=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fef7623, 0x979b1b08, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.98317=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fef6b61, 0x31f551c1, 0x3fd147ae, 0x147ae15b},			/* 0.98185=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fef6038, 0xcb0e599a, 0x3fd1eb85, 0x1eb851ff},			/* 0.98049=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fef54aa, 0x99af10c8, 0x3fd28f5c, 0x28f5c2a3},			/* 0.97908=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fef48b6, 0xd692fb9c, 0x3fd33333, 0x33333347},			/* 0.97762=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fef3c5d, 0xbc670ee3, 0x3fd3d70a, 0x3d70a3eb},			/* 0.97611=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fef2f9f, 0x87c86f9b, 0x3fd47ae1, 0x47ae148f},			/* 0.97456=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fef227c, 0x7743282e, 0x3fd51eb8, 0x51eb8533},			/* 0.97295=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fef14f4, 0xcb50d310, 0x3fd5c28f, 0x5c28f5d7},			/* 0.97130=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fef0708, 0xc6573ae4, 0x3fd66666, 0x6666667b},			/* 0.96960=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3feef8b8, 0xaca6f02c, 0x3fd70a3d, 0x70a3d71f},			/* 0.96786=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3feeea04, 0xc479d483, 0x3fd7ae14, 0x7ae147c3},			/* 0.96606=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3feedaed, 0x55f19b62, 0x3fd851eb, 0x851eb867},			/* 0.96422=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3feecb72, 0xab1640a0, 0x3fd8f5c2, 0x8f5c290b},			/* 0.96233=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3feebb95, 0x0fd4747c, 0x3fd99999, 0x999999af},			/* 0.96039=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3feeab54, 0xd1fbfd6f, 0x3fda3d70, 0xa3d70a53},			/* 0.95841=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fee9ab2, 0x413e0fa8, 0x3fdae147, 0xae147af7},			/* 0.95638=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fee89ad, 0xaf2b9a5e, 0x3fdb851e, 0xb851eb9b},			/* 0.95430=f(0.43000)*/
-{62, 0,123,__LINE__, 0x3fee7847, 0x6f338ad5, 0x3fdc28f5, 0xc28f5c3f},			/* 0.95218=f(0.44000)*/
-{63, 0,123,__LINE__, 0x3fee667f, 0xd6a1055e, 0x3fdccccc, 0xcccccce3},			/* 0.95001=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fee5457, 0x3c999417, 0x3fdd70a3, 0xd70a3d87},			/* 0.94779=f(0.46000)*/
-{63, 0,123,__LINE__, 0x3fee41cd, 0xfa1b4ba8, 0x3fde147a, 0xe147ae2b},			/* 0.94553=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fee2ee4, 0x69fae602, 0x3fdeb851, 0xeb851ecf},			/* 0.94322=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fee1b9a, 0xe8e1d300, 0x3fdf5c28, 0xf5c28f73},			/* 0.94086=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fee07f1, 0xd54c3f33, 0x3fe00000, 0x0000000b},			/* 0.93846=f(0.50000)*/
-{63, 0,123,__LINE__, 0x3fedf3e9, 0x8f8710b6, 0x3fe051eb, 0x851eb85d},			/* 0.93602=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3feddf82, 0x79adda33, 0x3fe0a3d7, 0x0a3d70af},			/* 0.93353=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fedcabc, 0xf7a8c401, 0x3fe0f5c2, 0x8f5c2901},			/* 0.93099=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fedb599, 0x6f2a6b95, 0x3fe147ae, 0x147ae153},			/* 0.92841=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3feda018, 0x47adb92d, 0x3fe19999, 0x999999a5},			/* 0.92579=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fed8a39, 0xea73abd7, 0x3fe1eb85, 0x1eb851f7},			/* 0.92312=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fed73fe, 0xc2811bd0, 0x3fe23d70, 0xa3d70a49},			/* 0.92040=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fed5d67, 0x3c9c7354, 0x3fe28f5c, 0x28f5c29b},			/* 0.91765=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fed4673, 0xc74b5ded, 0x3fe2e147, 0xae147aed},			/* 0.91485=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fed2f24, 0xd2d06e4a, 0x3fe33333, 0x3333333f},			/* 0.91200=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fed177a, 0xd128ba99, 0x3fe3851e, 0xb851eb91},			/* 0.90911=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fecff76, 0x36096fa5, 0x3fe3d70a, 0x3d70a3e3},			/* 0.90618=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fece717, 0x76dd5a7e, 0x3fe428f5, 0xc28f5c35},			/* 0.90320=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fecce5f, 0x0ac26907, 0x3fe47ae1, 0x47ae1487},			/* 0.90019=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fecb54d, 0x6a872132, 0x3fe4cccc, 0xccccccd9},			/* 0.89713=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fec9be3, 0x10a80f29, 0x3fe51eb8, 0x51eb852b},			/* 0.89402=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fec8220, 0x794d2a56, 0x3fe570a3, 0xd70a3d7d},			/* 0.89088=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fec6806, 0x22473173, 0x3fe5c28f, 0x5c28f5cf},			/* 0.88769=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fec4d94, 0x8b0cfd96, 0x3fe6147a, 0xe147ae21},			/* 0.88447=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fec32cc, 0x34b8cc54, 0x3fe66666, 0x66666673},			/* 0.88120=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fec17ad, 0xa205811b, 0x3fe6b851, 0xeb851ec5},			/* 0.87789=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3febfc39, 0x574bddab, 0x3fe70a3d, 0x70a3d717},			/* 0.87453=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3febe06f, 0xda7fb1eb, 0x3fe75c28, 0xf5c28f69},			/* 0.87114=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3febc451, 0xb32d030d, 0x3fe7ae14, 0x7ae147bb},			/* 0.86771=f(0.74000)*/
-{61, 0,123,__LINE__, 0x3feba7df, 0x6a752a13, 0x3fe80000, 0x0000000d},			/* 0.86424=f(0.75000)*/
-{63, 0,123,__LINE__, 0x3feb8b19, 0x8b0be9da, 0x3fe851eb, 0x851eb85f},			/* 0.86072=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3feb6e00, 0xa1347c9d, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.85717=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3feb5095, 0x3abe991a, 0x3fe8f5c2, 0x8f5c2903},			/* 0.85358=f(0.78000)*/
-{63, 0,123,__LINE__, 0x3feb32d7, 0xe7036f6a, 0x3fe947ae, 0x147ae155},			/* 0.84995=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3feb14c9, 0x36e29d80, 0x3fe99999, 0x999999a7},			/* 0.84628=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3feaf669, 0xbcbf1b86, 0x3fe9eb85, 0x1eb851f9},			/* 0.84257=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fead7ba, 0x0c7c2014, 0x3fea3d70, 0xa3d70a4b},			/* 0.83883=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3feab8ba, 0xbb79fc4e, 0x3fea8f5c, 0x28f5c29d},			/* 0.83504=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fea996c, 0x6092f016, 0x3feae147, 0xae147aef},			/* 0.83122=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fea79cf, 0x9417f646, 0x3feb3333, 0x33333341},			/* 0.82736=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fea59e4, 0xefcd890c, 0x3feb851e, 0xb851eb93},			/* 0.82347=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fea39ad, 0x0ee85e94, 0x3febd70a, 0x3d70a3e5},			/* 0.81954=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fea1928, 0x8e0a1de3, 0x3fec28f5, 0xc28f5c37},			/* 0.81557=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe9f858, 0x0b3e0c29, 0x3fec7ae1, 0x47ae1489},			/* 0.81156=f(0.89000)*/
-{61, 0,123,__LINE__, 0x3fe9d73c, 0x25f5b273, 0x3feccccc, 0xccccccdb},			/* 0.80752=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe9b5d5, 0x7f057bea, 0x3fed1eb8, 0x51eb852d},			/* 0.80344=f(0.91000)*/
-{62, 0,123,__LINE__, 0x3fe99424, 0xb8a14cad, 0x3fed70a3, 0xd70a3d7f},			/* 0.79933=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe9722a, 0x7659114c, 0x3fedc28f, 0x5c28f5d1},			/* 0.79518=f(0.93000)*/
-{59, 0,123,__LINE__, 0x3fe94fe7, 0x5d15470f, 0x3fee147a, 0xe147ae23},			/* 0.79100=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fe92d5c, 0x13137d06, 0x3fee6666, 0x66666675},			/* 0.78678=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fe90a89, 0x3fe2ce05, 0x3feeb851, 0xeb851ec7},			/* 0.78253=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fe8e76f, 0x8c60539c, 0x3fef0a3d, 0x70a3d719},			/* 0.77825=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fe8c40f, 0xa2b39215, 0x3fef5c28, 0xf5c28f6b},			/* 0.77393=f(0.98000)*/
-{63, 0,123,__LINE__, 0x3fe8a06a, 0x2e4addae, 0x3fefae14, 0x7ae147bd},			/* 0.76958=f(0.99000)*/
-{62, 0,123,__LINE__, 0x3fe87c7f, 0xdbd7b8e9, 0x3ff00000, 0x00000007},			/* 0.76519=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fe85851, 0x594b2c46, 0x3ff028f5, 0xc28f5c30},			/* 0.76078=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fe833df, 0x55d21751, 0x3ff051eb, 0x851eb859},			/* 0.75633=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fe80f2a, 0x81d17b2d, 0x3ff07ae1, 0x47ae1482},			/* 0.75185=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fe7ea33, 0x8ee2bea6, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.74733=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fe7c4fb, 0x2fcfebeb, 0x3ff0cccc, 0xccccccd4},			/* 0.74279=f(1.05000)*/
-{63, 0,123,__LINE__, 0x3fe79f82, 0x188fe7f6, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.73822=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fe779c8, 0xfe42a3d3, 0x3ff11eb8, 0x51eb8526},			/* 0.73361=f(1.07000)*/
-{62, 0,123,__LINE__, 0x3fe753d0, 0x972d47a9, 0x3ff147ae, 0x147ae14f},			/* 0.72898=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fe72d99, 0x9ab657e3, 0x3ff170a3, 0xd70a3d78},			/* 0.72431=f(1.09000)*/
-{63, 0,123,__LINE__, 0x3fe70724, 0xc161d446, 0x3ff19999, 0x999999a1},			/* 0.71962=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fe6e072, 0xc4cd5141, 0x3ff1c28f, 0x5c28f5ca},			/* 0.71489=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fe6b984, 0x5fac0b6a, 0x3ff1eb85, 0x1eb851f3},			/* 0.71014=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fe6925a, 0x4dc2f553, 0x3ff2147a, 0xe147ae1c},			/* 0.70536=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fe66af5, 0x4be4bfc5, 0x3ff23d70, 0xa3d70a45},			/* 0.70055=f(1.14000)*/
-{63, 0,123,__LINE__, 0x3fe64356, 0x17eddc7c, 0x3ff26666, 0x6666666e},			/* 0.69571=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fe61b7d, 0x70c07b70, 0x3ff28f5c, 0x28f5c297},			/* 0.69085=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fe5f36c, 0x164082d2, 0x3ff2b851, 0xeb851ec0},			/* 0.68596=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fe5cb22, 0xc94f81c7, 0x3ff2e147, 0xae147ae9},			/* 0.68104=f(1.18000)*/
-{63, 0,123,__LINE__, 0x3fe5a2a2, 0x4bc89dfe, 0x3ff30a3d, 0x70a3d712},			/* 0.67610=f(1.19000)*/
-{55, 0,123,__LINE__, 0x3fcc3208, 0xa31f1a8d, 0xc01921fb, 0x54442d18},			/* 0.22027=f(-6.28318)*/
-{59, 0,123,__LINE__, 0xbfd103ce, 0x207e6e9b, 0xc012d97c, 0x7f3321d2},			/* -0.26585=f(-4.71238)*/
-{58, 0,123,__LINE__, 0xbfd378b4, 0x2ec2e4aa, 0xc00921fb, 0x54442d18},			/* -0.30424=f(-3.14159)*/
-{62, 0,123,__LINE__, 0x3fde3544, 0x9659654c, 0xbff921fb, 0x54442d18},			/* 0.47200=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{62, 0,123,__LINE__, 0x3fde3544, 0x9659654c, 0x3ff921fb, 0x54442d18},			/* 0.47200=f(1.57079)*/
-{58, 0,123,__LINE__, 0xbfd378b4, 0x2ec2e4aa, 0x400921fb, 0x54442d18},			/* -0.30424=f(3.14159)*/
-{59, 0,123,__LINE__, 0xbfd103ce, 0x207e6e9b, 0x4012d97c, 0x7f3321d2},			/* -0.26585=f(4.71238)*/
-{64, 0,123,__LINE__, 0xbfb61c36, 0x50e6ebab, 0xc03e0000, 0x00000000},			/* -0.08636=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbfbbb802, 0x5070cbd6, 0xc03c4ccc, 0xcccccccd},			/* -0.10827=f(-28.3000)*/
-{64, 0,123,__LINE__, 0x3fbedcdd, 0xec0a8e97, 0xc03a9999, 0x9999999a},			/* 0.12055=f(-26.6000)*/
-{57, 0,123,__LINE__, 0x3fb54f9b, 0x97999d3f, 0xc038e666, 0x66666667},			/* 0.08324=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xbfc36001, 0x17fee555, 0xc0373333, 0x33333334},			/* -0.15136=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbfa90eee, 0x7a5df36a, 0xc0358000, 0x00000001},			/* -0.04894=f(-21.5000)*/
-{61, 0,123,__LINE__, 0x3fc6a8df, 0xe461bf0d, 0xc033cccc, 0xccccccce},			/* 0.17702=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x3f763aa5, 0xe3227311, 0xc0321999, 0x9999999b},			/* 0.00542=f(-18.1000)*/
-{61, 0,123,__LINE__, 0xbfc915b4, 0x043f8fcc, 0xc0306666, 0x66666668},			/* -0.19597=f(-16.4000)*/
-{61, 0,123,__LINE__, 0x3fa86483, 0x1422de4b, 0xc02d6666, 0x6666666a},			/* 0.04764=f(-14.7000)*/
-{64, 0,123,__LINE__, 0x3fca7c8d, 0xf532fa0e, 0xc02a0000, 0x00000004},			/* 0.20692=f(-13.0000)*/
-{63, 0,123,__LINE__, 0xbfbcb084, 0xb1e7a2ae, 0xc0269999, 0x9999999e},			/* -0.11206=f(-11.3000)*/
-{60, 0,123,__LINE__, 0xbfcabfd0, 0x8c7a26b9, 0xc0233333, 0x33333338},			/* -0.20897=f(-9.60000)*/
-{54, 0,123,__LINE__, 0x3fc8e0d9, 0x53977cd9, 0xc01f9999, 0x999999a3},			/* 0.19436=f(-7.90000)*/
-{56, 0,123,__LINE__, 0x3fc9d2da, 0x5e4feb58, 0xc018cccc, 0xccccccd6},			/* 0.20174=f(-6.20000)*/
-{58, 0,123,__LINE__, 0xbfd483c4, 0xba446873, 0xc0120000, 0x00000009},			/* -0.32054=f(-4.50000)*/
-{55, 0,123,__LINE__, 0xbfc7af42, 0xbff0d903, 0xc0066666, 0x66666678},			/* -0.18503=f(-2.80000)*/
-{64, 0,123,__LINE__, 0x3fe70724, 0xc161d42c, 0xbff19999, 0x999999bd},			/* 0.71962=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fed2f24, 0xd2d06e62, 0x3fe33333, 0x333332ec},			/* 0.91200=f(0.60000)*/
-{58, 0,123,__LINE__, 0x3fac6fb5, 0xeba43bce, 0x40026666, 0x66666654},			/* 0.05553=f(2.30000)*/
-{55, 0,123,__LINE__, 0xbfd96ae7, 0x093e9504, 0x400fffff, 0xffffffee},			/* -0.39714=f(4.00000)*/
-{54, 0,123,__LINE__, 0x3faeadd5, 0xe4480d75, 0x4016cccc, 0xccccccc4},			/* 0.05992=f(5.70000)*/
-{55, 0,123,__LINE__, 0x3fd1d485, 0x4b035ef1, 0x401d9999, 0x99999991},			/* 0.27859=f(7.40000)*/
-{59, 0,123,__LINE__, 0xbfbd3ec8, 0x484b6230, 0x40223333, 0x3333332f},			/* -0.11423=f(9.10000)*/
-{62, 0,123,__LINE__, 0xbfca0285, 0xa59d527a, 0x40259999, 0x99999995},			/* -0.20320=f(10.8000)*/
-{61, 0,123,__LINE__, 0x3fc2cd18, 0xc19effb3, 0x4028ffff, 0xfffffffb},			/* 0.14688=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3fc21864, 0x59e106b7, 0x402c6666, 0x66666661},			/* 0.14136=f(14.2000)*/
-{61, 0,123,__LINE__, 0xbfc51dc0, 0xda0c410a, 0x402fcccc, 0xccccccc7},			/* -0.16497=f(15.9000)*/
-{64, 0,123,__LINE__, 0xbfb61996, 0x15cbb9aa, 0x40319999, 0x99999997},			/* -0.08632=f(17.6000)*/
-{63, 0,123,__LINE__, 0x3fc5e6d8, 0x58408485, 0x40334ccc, 0xccccccca},			/* 0.17110=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3fa2ba7d, 0xf3556369, 0x4034ffff, 0xfffffffd},			/* 0.03657=f(21.0000)*/
-{63, 0,123,__LINE__, 0xbfc55c69, 0x1955dac2, 0x4036b333, 0x33333330},			/* -0.16688=f(22.7000)*/
-{55, 0,123,__LINE__, 0x3f7f6fde, 0xae9274fd, 0x40386666, 0x66666663},			/* 0.00767=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3fc3ad27, 0xbf860b1b, 0x403a1999, 0x99999996},			/* 0.15372=f(26.1000)*/
-{64, 0,123,__LINE__, 0xbfa7617b, 0x541dda80, 0x403bcccc, 0xccccccc9},			/* -0.04566=f(27.8000)*/
-{64, 0,123,__LINE__, 0xbfc10afd, 0x307647d2, 0x403d7fff, 0xfffffffc},			/* -0.13314=f(29.5000)*/
-0,};
-test_j0(m)   {run_vector_1(m,j0_vec,(char *)(j0),"j0","dd");   }	
diff --git a/newlib/libm/test/j0f_vec.c b/newlib/libm/test/j0f_vec.c
deleted file mode 100644
index 2f7a531e6..000000000
--- a/newlib/libm/test/j0f_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type j0f_vec[] = {
-{11, 0,123,__LINE__, 0x3fe579eb, 0x54c385c0, 0xbff33333, 0x33333333},			/* 0.67113=f(-1.20000)*/
-{11, 0,123,__LINE__, 0x3fe5a2a2, 0x4048de13, 0xbff30a3d, 0x70a3d70a},			/* 0.67610=f(-1.19000)*/
-{11, 0,123,__LINE__, 0x3fe5cb22, 0xe4209500, 0xbff2e147, 0xae147ae1},			/* 0.68104=f(-1.18000)*/
-{11, 0,123,__LINE__, 0x3fe5f36c, 0x275c77de, 0xbff2b851, 0xeb851eb8},			/* 0.68596=f(-1.17000)*/
-{11, 0,123,__LINE__, 0x3fe61b7d, 0x6fc93bf1, 0xbff28f5c, 0x28f5c28f},			/* 0.69085=f(-1.16000)*/
-{11, 0,123,__LINE__, 0x3fe64356, 0x2f751fea, 0xbff26666, 0x66666666},			/* 0.69571=f(-1.15000)*/
-{11, 0,123,__LINE__, 0x3fe66af5, 0x4cd063b5, 0xbff23d70, 0xa3d70a3d},			/* 0.70055=f(-1.14000)*/
-{11, 0,123,__LINE__, 0x3fe6925a, 0x53fe967c, 0xbff2147a, 0xe147ae14},			/* 0.70536=f(-1.13000)*/
-{11, 0,123,__LINE__, 0x3fe6b984, 0x45da0567, 0xbff1eb85, 0x1eb851eb},			/* 0.71014=f(-1.12000)*/
-{11, 0,123,__LINE__, 0x3fe6e072, 0xba4519c7, 0xbff1c28f, 0x5c28f5c2},			/* 0.71489=f(-1.11000)*/
-{11, 0,123,__LINE__, 0x3fe70724, 0xb21e6353, 0xbff19999, 0x99999999},			/* 0.71962=f(-1.10000)*/
-{11, 0,123,__LINE__, 0x3fe72d99, 0x9f97d17f, 0xbff170a3, 0xd70a3d70},			/* 0.72431=f(-1.09000)*/
-{11, 0,123,__LINE__, 0x3fe753d0, 0x8dd00e2c, 0xbff147ae, 0x147ae147},			/* 0.72898=f(-1.08000)*/
-{11, 0,123,__LINE__, 0x3fe779c8, 0xe474258f, 0xbff11eb8, 0x51eb851e},			/* 0.73361=f(-1.07000)*/
-{11, 0,123,__LINE__, 0x3fe79f82, 0x31c8563a, 0xbff0f5c2, 0x8f5c28f5},			/* 0.73822=f(-1.06000)*/
-{11, 0,123,__LINE__, 0x3fe7c4fb, 0x3f1bfd37, 0xbff0cccc, 0xcccccccc},			/* 0.74279=f(-1.05000)*/
-{11, 0,123,__LINE__, 0x3fe7ea33, 0x910e6e4d, 0xbff0a3d7, 0x0a3d70a3},			/* 0.74733=f(-1.04000)*/
-{11, 0,123,__LINE__, 0x3fe80f2a, 0x879b83cb, 0xbff07ae1, 0x47ae147a},			/* 0.75185=f(-1.03000)*/
-{11, 0,123,__LINE__, 0x3fe833df, 0x65cb3b31, 0xbff051eb, 0x851eb851},			/* 0.75633=f(-1.02000)*/
-{11, 0,123,__LINE__, 0x3fe85851, 0x6f62a516, 0xbff028f5, 0xc28f5c28},			/* 0.76078=f(-1.01000)*/
-{11, 0,123,__LINE__, 0x3fe87c7f, 0xddb0a579, 0xbfefffff, 0xfffffffe},			/* 0.76519=f(-0.01000)*/
-{11, 0,123,__LINE__, 0x3fe8a06a, 0x37748418, 0xbfefae14, 0x7ae147ac},			/* 0.76958=f(-0.99000)*/
-{11, 0,123,__LINE__, 0x3fe8c40f, 0xacecf607, 0xbfef5c28, 0xf5c28f5a},			/* 0.77393=f(-0.98000)*/
-{11, 0,123,__LINE__, 0x3fe8e76f, 0x6dbe05c9, 0xbfef0a3d, 0x70a3d708},			/* 0.77825=f(-0.97000)*/
-{11, 0,123,__LINE__, 0x3fe90a89, 0x27d4d6b5, 0xbfeeb851, 0xeb851eb6},			/* 0.78253=f(-0.96000)*/
-{11, 0,123,__LINE__, 0x3fe92d5c, 0x2907f4a5, 0xbfee6666, 0x66666664},			/* 0.78678=f(-0.95000)*/
-{11, 0,123,__LINE__, 0x3fe94fe7, 0x5d5e54bc, 0xbfee147a, 0xe147ae12},			/* 0.79100=f(-0.94000)*/
-{11, 0,123,__LINE__, 0x3fe9722a, 0x7415526a, 0xbfedc28f, 0x5c28f5c0},			/* 0.79518=f(-0.93000)*/
-{11, 0,123,__LINE__, 0x3fe99424, 0xc2e8192d, 0xbfed70a3, 0xd70a3d6e},			/* 0.79933=f(-0.92000)*/
-{11, 0,123,__LINE__, 0x3fe9b5d5, 0x71a7c33d, 0xbfed1eb8, 0x51eb851c},			/* 0.80344=f(-0.91000)*/
-{11, 0,123,__LINE__, 0x3fe9d73c, 0x1a10bb13, 0xbfeccccc, 0xccccccca},			/* 0.80752=f(-0.90000)*/
-{11, 0,123,__LINE__, 0x3fe9f858, 0x02fd26e5, 0xbfec7ae1, 0x47ae1478},			/* 0.81156=f(-0.89000)*/
-{11, 0,123,__LINE__, 0x3fea1928, 0x820065dd, 0xbfec28f5, 0xc28f5c26},			/* 0.81557=f(-0.88000)*/
-{11, 0,123,__LINE__, 0x3fea39ad, 0x0b502c4f, 0xbfebd70a, 0x3d70a3d4},			/* 0.81954=f(-0.87000)*/
-{11, 0,123,__LINE__, 0x3fea59e4, 0xe69c2792, 0xbfeb851e, 0xb851eb82},			/* 0.82347=f(-0.86000)*/
-{11, 0,123,__LINE__, 0x3fea79cf, 0x8f646d74, 0xbfeb3333, 0x33333330},			/* 0.82736=f(-0.85000)*/
-{11, 0,123,__LINE__, 0x3fea996c, 0x73e91b88, 0xbfeae147, 0xae147ade},			/* 0.83122=f(-0.84000)*/
-{11, 0,123,__LINE__, 0x3feab8ba, 0xc3b2f724, 0xbfea8f5c, 0x28f5c28c},			/* 0.83504=f(-0.83000)*/
-{11, 0,123,__LINE__, 0x3fead7ba, 0x19b6b3de, 0xbfea3d70, 0xa3d70a3a},			/* 0.83883=f(-0.82000)*/
-{11, 0,123,__LINE__, 0x3feaf669, 0xbf1b4779, 0xbfe9eb85, 0x1eb851e8},			/* 0.84257=f(-0.81000)*/
-{11, 0,123,__LINE__, 0x3feb14c9, 0x2f719b53, 0xbfe99999, 0x99999996},			/* 0.84628=f(-0.80000)*/
-{11, 0,123,__LINE__, 0x3feb32d8, 0x0085d38a, 0xbfe947ae, 0x147ae144},			/* 0.84995=f(-0.79000)*/
-{11, 0,123,__LINE__, 0x3feb5095, 0x61f1aa3c, 0xbfe8f5c2, 0x8f5c28f2},			/* 0.85358=f(-0.78000)*/
-{11, 0,123,__LINE__, 0x3feb6e00, 0xa37eeb48, 0xbfe8a3d7, 0x0a3d70a0},			/* 0.85717=f(-0.77000)*/
-{11, 0,123,__LINE__, 0x3feb8b19, 0xa2b54d3b, 0xbfe851eb, 0x851eb84e},			/* 0.86072=f(-0.76000)*/
-{11, 0,123,__LINE__, 0x3feba7df, 0x4dec7685, 0xbfe7ffff, 0xfffffffc},			/* 0.86424=f(-0.75000)*/
-{11, 0,123,__LINE__, 0x3febc451, 0xca492588, 0xbfe7ae14, 0x7ae147aa},			/* 0.86771=f(-0.74000)*/
-{11, 0,123,__LINE__, 0x3febe06f, 0xdabafaf7, 0xbfe75c28, 0xf5c28f58},			/* 0.87114=f(-0.73000)*/
-{11, 0,123,__LINE__, 0x3febfc39, 0x4227a674, 0xbfe70a3d, 0x70a3d706},			/* 0.87453=f(-0.72000)*/
-{11, 0,123,__LINE__, 0x3fec17ad, 0x98fd2768, 0xbfe6b851, 0xeb851eb4},			/* 0.87789=f(-0.71000)*/
-{11, 0,123,__LINE__, 0x3fec32cc, 0x30c2d22a, 0xbfe66666, 0x66666662},			/* 0.88120=f(-0.70000)*/
-{11, 0,123,__LINE__, 0x3fec4d94, 0x85aa99ff, 0xbfe6147a, 0xe147ae10},			/* 0.88447=f(-0.69000)*/
-{11, 0,123,__LINE__, 0x3fec6806, 0x0b10200b, 0xbfe5c28f, 0x5c28f5be},			/* 0.88769=f(-0.68000)*/
-{11, 0,123,__LINE__, 0x3fec8220, 0x855cf82d, 0xbfe570a3, 0xd70a3d6c},			/* 0.89088=f(-0.67000)*/
-{11, 0,123,__LINE__, 0x3fec9be2, 0xfec2e4ab, 0xbfe51eb8, 0x51eb851a},			/* 0.89402=f(-0.66000)*/
-{11, 0,123,__LINE__, 0x3fecb54d, 0x5df0eb42, 0xbfe4cccc, 0xccccccc8},			/* 0.89713=f(-0.65000)*/
-{11, 0,123,__LINE__, 0x3fecce5f, 0x1bceeae4, 0xbfe47ae1, 0x47ae1476},			/* 0.90019=f(-0.64000)*/
-{11, 0,123,__LINE__, 0x3fece717, 0x68f13a43, 0xbfe428f5, 0xc28f5c24},			/* 0.90320=f(-0.63000)*/
-{11, 0,123,__LINE__, 0x3fecff76, 0x2d1f708f, 0xbfe3d70a, 0x3d70a3d2},			/* 0.90618=f(-0.62000)*/
-{11, 0,123,__LINE__, 0x3fed177a, 0xbbd2bb7c, 0xbfe3851e, 0xb851eb80},			/* 0.90911=f(-0.61000)*/
-{11, 0,123,__LINE__, 0x3fed2f24, 0xdb21a0f2, 0xbfe33333, 0x3333332e},			/* 0.91200=f(-0.60000)*/
-{11, 0,123,__LINE__, 0x3fed4673, 0xbc19773d, 0xbfe2e147, 0xae147adc},			/* 0.91485=f(-0.59000)*/
-{11, 0,123,__LINE__, 0x3fed5d67, 0x44d9b7f9, 0xbfe28f5c, 0x28f5c28a},			/* 0.91765=f(-0.58000)*/
-{11, 0,123,__LINE__, 0x3fed73fe, 0xd033e05b, 0xbfe23d70, 0xa3d70a38},			/* 0.92040=f(-0.57000)*/
-{11, 0,123,__LINE__, 0x3fed8a39, 0xd8a68cb3, 0xbfe1eb85, 0x1eb851e6},			/* 0.92312=f(-0.56000)*/
-{11, 0,123,__LINE__, 0x3feda018, 0x45c20394, 0xbfe19999, 0x99999994},			/* 0.92579=f(-0.55000)*/
-{11, 0,123,__LINE__, 0x3fedb599, 0x4c4fd893, 0xbfe147ae, 0x147ae142},			/* 0.92841=f(-0.54000)*/
-{11, 0,123,__LINE__, 0x3fedcabc, 0xfafde88a, 0xbfe0f5c2, 0x8f5c28f0},			/* 0.93099=f(-0.53000)*/
-{11, 0,123,__LINE__, 0x3feddf82, 0x86b32ac1, 0xbfe0a3d7, 0x0a3d709e},			/* 0.93353=f(-0.52000)*/
-{11, 0,123,__LINE__, 0x3fedf3e9, 0x8efe6284, 0xbfe051eb, 0x851eb84c},			/* 0.93602=f(-0.51000)*/
-{11, 0,123,__LINE__, 0x3fee07f1, 0xdc9ee45c, 0xbfdfffff, 0xfffffff4},			/* 0.93846=f(-0.50000)*/
-{11, 0,123,__LINE__, 0x3fee1b9a, 0xc853cc04, 0xbfdf5c28, 0xf5c28f50},			/* 0.94086=f(-0.49000)*/
-{11, 0,123,__LINE__, 0x3fee2ee4, 0x6330b738, 0xbfdeb851, 0xeb851eac},			/* 0.94322=f(-0.48000)*/
-{11, 0,123,__LINE__, 0x3fee41ce, 0x069bb0ab, 0xbfde147a, 0xe147ae08},			/* 0.94553=f(-0.47000)*/
-{11, 0,123,__LINE__, 0x3fee5457, 0x32132cdf, 0xbfdd70a3, 0xd70a3d64},			/* 0.94779=f(-0.46000)*/
-{11, 0,123,__LINE__, 0x3fee667f, 0xd3cd6cb8, 0xbfdccccc, 0xccccccc0},			/* 0.95001=f(-0.45000)*/
-{11, 0,123,__LINE__, 0x3fee7847, 0x8e418594, 0xbfdc28f5, 0xc28f5c1c},			/* 0.95218=f(-0.44000)*/
-{11, 0,123,__LINE__, 0x3fee89ad, 0xbd567f2a, 0xbfdb851e, 0xb851eb78},			/* 0.95430=f(-0.43000)*/
-{11, 0,123,__LINE__, 0x3fee9ab2, 0x506b3888, 0xbfdae147, 0xae147ad4},			/* 0.95638=f(-0.42000)*/
-{11, 0,123,__LINE__, 0x3feeab54, 0xc6756c6e, 0xbfda3d70, 0xa3d70a30},			/* 0.95841=f(-0.41000)*/
-{11, 0,123,__LINE__, 0x3feebb95, 0x115ba24c, 0xbfd99999, 0x9999998c},			/* 0.96039=f(-0.40000)*/
-{11, 0,123,__LINE__, 0x3feecb72, 0xb0add857, 0xbfd8f5c2, 0x8f5c28e8},			/* 0.96233=f(-0.39000)*/
-{11, 0,123,__LINE__, 0x3feedaed, 0x6f5b4c3d, 0xbfd851eb, 0x851eb844},			/* 0.96422=f(-0.38000)*/
-{11, 0,123,__LINE__, 0x3feeea04, 0xd05bdf84, 0xbfd7ae14, 0x7ae147a0},			/* 0.96606=f(-0.37000)*/
-{11, 0,123,__LINE__, 0x3feef8b8, 0xc565bda8, 0xbfd70a3d, 0x70a3d6fc},			/* 0.96786=f(-0.36000)*/
-{11, 0,123,__LINE__, 0x3fef0708, 0xcf40dce7, 0xbfd66666, 0x66666658},			/* 0.96960=f(-0.35000)*/
-{11, 0,123,__LINE__, 0x3fef14f4, 0xe1b7d8d5, 0xbfd5c28f, 0x5c28f5b4},			/* 0.97130=f(-0.34000)*/
-{11, 0,123,__LINE__, 0x3fef227c, 0x7e32bf66, 0xbfd51eb8, 0x51eb8510},			/* 0.97295=f(-0.33000)*/
-{11, 0,123,__LINE__, 0x3fef2f9f, 0x9921a2b4, 0xbfd47ae1, 0x47ae146c},			/* 0.97456=f(-0.32000)*/
-{11, 0,123,__LINE__, 0x3fef3c5d, 0xb48e79df, 0xbfd3d70a, 0x3d70a3c8},			/* 0.97611=f(-0.31000)*/
-{11, 0,123,__LINE__, 0x3fef48b6, 0xc5905a61, 0xbfd33333, 0x33333324},			/* 0.97762=f(-0.30000)*/
-{11, 0,123,__LINE__, 0x3fef54aa, 0x9a886837, 0xbfd28f5c, 0x28f5c280},			/* 0.97908=f(-0.29000)*/
-{11, 0,123,__LINE__, 0x3fef6038, 0xde5fdaf6, 0xbfd1eb85, 0x1eb851dc},			/* 0.98049=f(-0.28000)*/
-{11, 0,123,__LINE__, 0x3fef6b61, 0x39cffe81, 0xbfd147ae, 0x147ae138},			/* 0.98185=f(-0.27000)*/
-{11, 0,123,__LINE__, 0x3fef7623, 0xa29f4407, 0xbfd0a3d7, 0x0a3d7094},			/* 0.98317=f(-0.26000)*/
-{11, 0,123,__LINE__, 0x3fef807f, 0xc4620042, 0xbfcfffff, 0xffffffe0},			/* 0.98443=f(-0.25000)*/
-{11, 0,123,__LINE__, 0x3fef8a75, 0x94f21c76, 0xbfceb851, 0xeb851e98},			/* 0.98565=f(-0.24000)*/
-{11, 0,123,__LINE__, 0x3fef9404, 0x9a1a2084, 0xbfcd70a3, 0xd70a3d50},			/* 0.98681=f(-0.23000)*/
-{11, 0,123,__LINE__, 0x3fef9d2d, 0x17180110, 0xbfcc28f5, 0xc28f5c08},			/* 0.98793=f(-0.22000)*/
-{11, 0,123,__LINE__, 0x3fefa5ee, 0x91c9d2b0, 0xbfcae147, 0xae147ac0},			/* 0.98900=f(-0.21000)*/
-{11, 0,123,__LINE__, 0x3fefae48, 0xdc5e50f4, 0xbfc99999, 0x99999978},			/* 0.99002=f(-0.20000)*/
-{11, 0,123,__LINE__, 0x3fefb63b, 0xefa104c8, 0xbfc851eb, 0x851eb830},			/* 0.99099=f(-0.19000)*/
-{11, 0,123,__LINE__, 0x3fefbdc7, 0x782b6bd2, 0xbfc70a3d, 0x70a3d6e8},			/* 0.99191=f(-0.18000)*/
-{11, 0,123,__LINE__, 0x3fefc4eb, 0x6f79969e, 0xbfc5c28f, 0x5c28f5a0},			/* 0.99278=f(-0.17000)*/
-{11, 0,123,__LINE__, 0x3fefcba7, 0xcf22b734, 0xbfc47ae1, 0x47ae1458},			/* 0.99361=f(-0.16000)*/
-{11, 0,123,__LINE__, 0x3fefd1fc, 0x1f06de9a, 0xbfc33333, 0x33333310},			/* 0.99438=f(-0.15000)*/
-{11, 0,123,__LINE__, 0x3fefd7e8, 0xa5c43a7d, 0xbfc1eb85, 0x1eb851c8},			/* 0.99510=f(-0.14000)*/
-{11, 0,123,__LINE__, 0x3fefdd6c, 0xc5867228, 0xbfc0a3d7, 0x0a3d7080},			/* 0.99577=f(-0.13000)*/
-{11, 0,123,__LINE__, 0x3fefe289, 0x124b4c4c, 0xbfbeb851, 0xeb851e71},			/* 0.99640=f(-0.12000)*/
-{11, 0,123,__LINE__, 0x3fefe73c, 0xeeb8c735, 0xbfbc28f5, 0xc28f5be2},			/* 0.99697=f(-0.11000)*/
-{11, 0,123,__LINE__, 0x3fefeb88, 0x56bbec1b, 0xbfb99999, 0x99999953},			/* 0.99750=f(-0.00100)*/
-{11, 0,123,__LINE__, 0x3fefef6b, 0x6ce4c8b0, 0xbfb70a3d, 0x70a3d6c4},			/* 0.99797=f(-0.09000)*/
-{11, 0,123,__LINE__, 0x3feff2e5, 0xe135abeb, 0xbfb47ae1, 0x47ae1435},			/* 0.99840=f(-0.08000)*/
-{11, 0,123,__LINE__, 0x3feff5f7, 0xb0ce42a8, 0xbfb1eb85, 0x1eb851a6},			/* 0.99877=f(-0.07000)*/
-{11, 0,123,__LINE__, 0x3feff8a0, 0xff32449a, 0xbfaeb851, 0xeb851e2d},			/* 0.99910=f(-0.06000)*/
-{11, 0,123,__LINE__, 0x3feffae1, 0x574e1597, 0xbfa99999, 0x9999990e},			/* 0.99937=f(-0.05000)*/
-{11, 0,123,__LINE__, 0x3feffcb9, 0x29f9a945, 0xbfa47ae1, 0x47ae13ef},			/* 0.99959=f(-0.04000)*/
-{11, 0,123,__LINE__, 0x3feffe28, 0x2912d7f4, 0xbf9eb851, 0xeb851da0},			/* 0.99977=f(-0.03000)*/
-{11, 0,123,__LINE__, 0x3fefff2e, 0x535a6888, 0xbf947ae1, 0x47ae1362},			/* 0.99990=f(-0.02000)*/
-{11, 0,123,__LINE__, 0x3fefffcb, 0xa7efed63, 0xbf847ae1, 0x47ae1249},			/* 0.99997=f(-0.00010)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3cd19000, 0x00000000},			/* 1.00000=f(9.74915e-16)*/
-{11, 0,123,__LINE__, 0x3fefffcb, 0xa7efed63, 0x3f847ae1, 0x47ae16ad},			/* 0.99997=f(0.01000)*/
-{11, 0,123,__LINE__, 0x3fefff2e, 0x535a6888, 0x3f947ae1, 0x47ae1594},			/* 0.99990=f(0.02000)*/
-{11, 0,123,__LINE__, 0x3feffe28, 0x2912d7f4, 0x3f9eb851, 0xeb851fd2},			/* 0.99977=f(0.03000)*/
-{11, 0,123,__LINE__, 0x3feffcb9, 0x29f9a945, 0x3fa47ae1, 0x47ae1508},			/* 0.99959=f(0.04000)*/
-{11, 0,123,__LINE__, 0x3feffae1, 0x574e1597, 0x3fa99999, 0x99999a27},			/* 0.99937=f(0.05000)*/
-{11, 0,123,__LINE__, 0x3feff8a0, 0xff32449a, 0x3faeb851, 0xeb851f46},			/* 0.99910=f(0.06000)*/
-{11, 0,123,__LINE__, 0x3feff5f7, 0xb0ce42a8, 0x3fb1eb85, 0x1eb85232},			/* 0.99877=f(0.07000)*/
-{11, 0,123,__LINE__, 0x3feff2e5, 0xe135abeb, 0x3fb47ae1, 0x47ae14c1},			/* 0.99840=f(0.08000)*/
-{11, 0,123,__LINE__, 0x3fefef6b, 0x6ce4c8b0, 0x3fb70a3d, 0x70a3d750},			/* 0.99797=f(0.09000)*/
-{11, 0,123,__LINE__, 0x3fefeb88, 0x56bbec1b, 0x3fb99999, 0x999999df},			/* 0.99750=f(0.10000)*/
-{11, 0,123,__LINE__, 0x3fefe73c, 0xeeb8c735, 0x3fbc28f5, 0xc28f5c6e},			/* 0.99697=f(0.11000)*/
-{11, 0,123,__LINE__, 0x3fefe289, 0x124b4c4c, 0x3fbeb851, 0xeb851efd},			/* 0.99640=f(0.12000)*/
-{11, 0,123,__LINE__, 0x3fefdd6c, 0xc5867228, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.99577=f(0.13000)*/
-{11, 0,123,__LINE__, 0x3fefd7e8, 0xa5c43a7d, 0x3fc1eb85, 0x1eb8520e},			/* 0.99510=f(0.14000)*/
-{11, 0,123,__LINE__, 0x3fefd1fc, 0x1f06de9a, 0x3fc33333, 0x33333356},			/* 0.99438=f(0.15000)*/
-{11, 0,123,__LINE__, 0x3fefcba7, 0xcf22b734, 0x3fc47ae1, 0x47ae149e},			/* 0.99361=f(0.16000)*/
-{11, 0,123,__LINE__, 0x3fefc4eb, 0x6f79969e, 0x3fc5c28f, 0x5c28f5e6},			/* 0.99278=f(0.17000)*/
-{11, 0,123,__LINE__, 0x3fefbdc7, 0x782b6bd2, 0x3fc70a3d, 0x70a3d72e},			/* 0.99191=f(0.18000)*/
-{11, 0,123,__LINE__, 0x3fefb63b, 0xefa104c8, 0x3fc851eb, 0x851eb876},			/* 0.99099=f(0.19000)*/
-{11, 0,123,__LINE__, 0x3fefae48, 0xdc5e50f4, 0x3fc99999, 0x999999be},			/* 0.99002=f(0.20000)*/
-{11, 0,123,__LINE__, 0x3fefa5ee, 0x91c9d2b0, 0x3fcae147, 0xae147b06},			/* 0.98900=f(0.21000)*/
-{11, 0,123,__LINE__, 0x3fef9d2d, 0x17180110, 0x3fcc28f5, 0xc28f5c4e},			/* 0.98793=f(0.22000)*/
-{11, 0,123,__LINE__, 0x3fef9404, 0x9a1a2084, 0x3fcd70a3, 0xd70a3d96},			/* 0.98681=f(0.23000)*/
-{11, 0,123,__LINE__, 0x3fef8a75, 0x94f21c76, 0x3fceb851, 0xeb851ede},			/* 0.98565=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fef807f, 0xc4620042, 0x3fd00000, 0x00000013},			/* 0.98443=f(0.25000)*/
-{11, 0,123,__LINE__, 0x3fef7623, 0xa29f4407, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.98317=f(0.26000)*/
-{11, 0,123,__LINE__, 0x3fef6b61, 0x39cffe81, 0x3fd147ae, 0x147ae15b},			/* 0.98185=f(0.27000)*/
-{11, 0,123,__LINE__, 0x3fef6038, 0xde5fdaf6, 0x3fd1eb85, 0x1eb851ff},			/* 0.98049=f(0.28000)*/
-{11, 0,123,__LINE__, 0x3fef54aa, 0x9a886837, 0x3fd28f5c, 0x28f5c2a3},			/* 0.97908=f(0.29000)*/
-{11, 0,123,__LINE__, 0x3fef48b6, 0xc5905a61, 0x3fd33333, 0x33333347},			/* 0.97762=f(0.30000)*/
-{11, 0,123,__LINE__, 0x3fef3c5d, 0xb48e79df, 0x3fd3d70a, 0x3d70a3eb},			/* 0.97611=f(0.31000)*/
-{11, 0,123,__LINE__, 0x3fef2f9f, 0x9921a2b4, 0x3fd47ae1, 0x47ae148f},			/* 0.97456=f(0.32000)*/
-{11, 0,123,__LINE__, 0x3fef227c, 0x7e32bf66, 0x3fd51eb8, 0x51eb8533},			/* 0.97295=f(0.33000)*/
-{11, 0,123,__LINE__, 0x3fef14f4, 0xe1b7d8d5, 0x3fd5c28f, 0x5c28f5d7},			/* 0.97130=f(0.34000)*/
-{11, 0,123,__LINE__, 0x3fef0708, 0xcf40dce7, 0x3fd66666, 0x6666667b},			/* 0.96960=f(0.35000)*/
-{11, 0,123,__LINE__, 0x3feef8b8, 0xc565bda8, 0x3fd70a3d, 0x70a3d71f},			/* 0.96786=f(0.36000)*/
-{11, 0,123,__LINE__, 0x3feeea04, 0xd05bdf84, 0x3fd7ae14, 0x7ae147c3},			/* 0.96606=f(0.37000)*/
-{11, 0,123,__LINE__, 0x3feedaed, 0x6f5b4c3d, 0x3fd851eb, 0x851eb867},			/* 0.96422=f(0.38000)*/
-{11, 0,123,__LINE__, 0x3feecb72, 0xb0add857, 0x3fd8f5c2, 0x8f5c290b},			/* 0.96233=f(0.39000)*/
-{11, 0,123,__LINE__, 0x3feebb95, 0x115ba24c, 0x3fd99999, 0x999999af},			/* 0.96039=f(0.40000)*/
-{11, 0,123,__LINE__, 0x3feeab54, 0xc6756c6e, 0x3fda3d70, 0xa3d70a53},			/* 0.95841=f(0.41000)*/
-{11, 0,123,__LINE__, 0x3fee9ab2, 0x506b3888, 0x3fdae147, 0xae147af7},			/* 0.95638=f(0.42000)*/
-{11, 0,123,__LINE__, 0x3fee89ad, 0xbd567f2a, 0x3fdb851e, 0xb851eb9b},			/* 0.95430=f(0.43000)*/
-{11, 0,123,__LINE__, 0x3fee7847, 0x8e418594, 0x3fdc28f5, 0xc28f5c3f},			/* 0.95218=f(0.44000)*/
-{11, 0,123,__LINE__, 0x3fee667f, 0xd3cd6cb8, 0x3fdccccc, 0xcccccce3},			/* 0.95001=f(0.45000)*/
-{11, 0,123,__LINE__, 0x3fee5457, 0x32132cdf, 0x3fdd70a3, 0xd70a3d87},			/* 0.94779=f(0.46000)*/
-{11, 0,123,__LINE__, 0x3fee41ce, 0x069bb0ab, 0x3fde147a, 0xe147ae2b},			/* 0.94553=f(0.47000)*/
-{11, 0,123,__LINE__, 0x3fee2ee4, 0x6330b738, 0x3fdeb851, 0xeb851ecf},			/* 0.94322=f(0.48000)*/
-{11, 0,123,__LINE__, 0x3fee1b9a, 0xc853cc04, 0x3fdf5c28, 0xf5c28f73},			/* 0.94086=f(0.49000)*/
-{11, 0,123,__LINE__, 0x3fee07f1, 0xdc9ee45c, 0x3fe00000, 0x0000000b},			/* 0.93846=f(0.50000)*/
-{11, 0,123,__LINE__, 0x3fedf3e9, 0x8efe6284, 0x3fe051eb, 0x851eb85d},			/* 0.93602=f(0.51000)*/
-{11, 0,123,__LINE__, 0x3feddf82, 0x86b32ac1, 0x3fe0a3d7, 0x0a3d70af},			/* 0.93353=f(0.52000)*/
-{11, 0,123,__LINE__, 0x3fedcabc, 0xfafde88a, 0x3fe0f5c2, 0x8f5c2901},			/* 0.93099=f(0.53000)*/
-{11, 0,123,__LINE__, 0x3fedb599, 0x4c4fd893, 0x3fe147ae, 0x147ae153},			/* 0.92841=f(0.54000)*/
-{11, 0,123,__LINE__, 0x3feda018, 0x45c20394, 0x3fe19999, 0x999999a5},			/* 0.92579=f(0.55000)*/
-{11, 0,123,__LINE__, 0x3fed8a39, 0xd8a68cb3, 0x3fe1eb85, 0x1eb851f7},			/* 0.92312=f(0.56000)*/
-{11, 0,123,__LINE__, 0x3fed73fe, 0xd033e05b, 0x3fe23d70, 0xa3d70a49},			/* 0.92040=f(0.57000)*/
-{11, 0,123,__LINE__, 0x3fed5d67, 0x44d9b7f9, 0x3fe28f5c, 0x28f5c29b},			/* 0.91765=f(0.58000)*/
-{11, 0,123,__LINE__, 0x3fed4673, 0xbc19773d, 0x3fe2e147, 0xae147aed},			/* 0.91485=f(0.59000)*/
-{11, 0,123,__LINE__, 0x3fed2f24, 0xdb21a0f2, 0x3fe33333, 0x3333333f},			/* 0.91200=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3fed177a, 0xbbd2bb7c, 0x3fe3851e, 0xb851eb91},			/* 0.90911=f(0.61000)*/
-{11, 0,123,__LINE__, 0x3fecff76, 0x2d1f708f, 0x3fe3d70a, 0x3d70a3e3},			/* 0.90618=f(0.62000)*/
-{11, 0,123,__LINE__, 0x3fece717, 0x68f13a43, 0x3fe428f5, 0xc28f5c35},			/* 0.90320=f(0.63000)*/
-{11, 0,123,__LINE__, 0x3fecce5f, 0x1bceeae4, 0x3fe47ae1, 0x47ae1487},			/* 0.90019=f(0.64000)*/
-{11, 0,123,__LINE__, 0x3fecb54d, 0x5df0eb42, 0x3fe4cccc, 0xccccccd9},			/* 0.89713=f(0.65000)*/
-{11, 0,123,__LINE__, 0x3fec9be2, 0xfec2e4ab, 0x3fe51eb8, 0x51eb852b},			/* 0.89402=f(0.66000)*/
-{11, 0,123,__LINE__, 0x3fec8220, 0x855cf82d, 0x3fe570a3, 0xd70a3d7d},			/* 0.89088=f(0.67000)*/
-{11, 0,123,__LINE__, 0x3fec6806, 0x0b10200b, 0x3fe5c28f, 0x5c28f5cf},			/* 0.88769=f(0.68000)*/
-{11, 0,123,__LINE__, 0x3fec4d94, 0x85aa99ff, 0x3fe6147a, 0xe147ae21},			/* 0.88447=f(0.69000)*/
-{11, 0,123,__LINE__, 0x3fec32cc, 0x30c2d22a, 0x3fe66666, 0x66666673},			/* 0.88120=f(0.70000)*/
-{11, 0,123,__LINE__, 0x3fec17ad, 0x98fd2768, 0x3fe6b851, 0xeb851ec5},			/* 0.87789=f(0.71000)*/
-{11, 0,123,__LINE__, 0x3febfc39, 0x4227a674, 0x3fe70a3d, 0x70a3d717},			/* 0.87453=f(0.72000)*/
-{11, 0,123,__LINE__, 0x3febe06f, 0xdabafaf7, 0x3fe75c28, 0xf5c28f69},			/* 0.87114=f(0.73000)*/
-{11, 0,123,__LINE__, 0x3febc451, 0xca492588, 0x3fe7ae14, 0x7ae147bb},			/* 0.86771=f(0.74000)*/
-{11, 0,123,__LINE__, 0x3feba7df, 0x4dec7685, 0x3fe80000, 0x0000000d},			/* 0.86424=f(0.75000)*/
-{11, 0,123,__LINE__, 0x3feb8b19, 0xa2b54d3b, 0x3fe851eb, 0x851eb85f},			/* 0.86072=f(0.76000)*/
-{11, 0,123,__LINE__, 0x3feb6e00, 0xa37eeb48, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.85717=f(0.77000)*/
-{11, 0,123,__LINE__, 0x3feb5095, 0x61f1aa3c, 0x3fe8f5c2, 0x8f5c2903},			/* 0.85358=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3feb32d8, 0x0085d38a, 0x3fe947ae, 0x147ae155},			/* 0.84995=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3feb14c9, 0x2f719b53, 0x3fe99999, 0x999999a7},			/* 0.84628=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3feaf669, 0xbf1b4779, 0x3fe9eb85, 0x1eb851f9},			/* 0.84257=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3fead7ba, 0x19b6b3de, 0x3fea3d70, 0xa3d70a4b},			/* 0.83883=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3feab8ba, 0xc3b2f724, 0x3fea8f5c, 0x28f5c29d},			/* 0.83504=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3fea996c, 0x73e91b88, 0x3feae147, 0xae147aef},			/* 0.83122=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3fea79cf, 0x8f646d74, 0x3feb3333, 0x33333341},			/* 0.82736=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3fea59e4, 0xe69c2792, 0x3feb851e, 0xb851eb93},			/* 0.82347=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3fea39ad, 0x0b502c4f, 0x3febd70a, 0x3d70a3e5},			/* 0.81954=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3fea1928, 0x820065dd, 0x3fec28f5, 0xc28f5c37},			/* 0.81557=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3fe9f858, 0x02fd26e5, 0x3fec7ae1, 0x47ae1489},			/* 0.81156=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3fe9d73c, 0x1a10bb13, 0x3feccccc, 0xccccccdb},			/* 0.80752=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3fe9b5d5, 0x71a7c33d, 0x3fed1eb8, 0x51eb852d},			/* 0.80344=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3fe99424, 0xc2e8192d, 0x3fed70a3, 0xd70a3d7f},			/* 0.79933=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3fe9722a, 0x7415526a, 0x3fedc28f, 0x5c28f5d1},			/* 0.79518=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3fe94fe7, 0x5d5e54bc, 0x3fee147a, 0xe147ae23},			/* 0.79100=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3fe92d5c, 0x2907f4a5, 0x3fee6666, 0x66666675},			/* 0.78678=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3fe90a89, 0x27d4d6b5, 0x3feeb851, 0xeb851ec7},			/* 0.78253=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3fe8e76f, 0x6dbe05c9, 0x3fef0a3d, 0x70a3d719},			/* 0.77825=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3fe8c40f, 0xacecf607, 0x3fef5c28, 0xf5c28f6b},			/* 0.77393=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3fe8a06a, 0x37748418, 0x3fefae14, 0x7ae147bd},			/* 0.76958=f(0.99000)*/
-{11, 0,123,__LINE__, 0x3fe87c7f, 0xddb0a579, 0x3ff00000, 0x00000007},			/* 0.76519=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fe85851, 0x6f62a516, 0x3ff028f5, 0xc28f5c30},			/* 0.76078=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3fe833df, 0x65cb3b31, 0x3ff051eb, 0x851eb859},			/* 0.75633=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fe80f2a, 0x879b83cb, 0x3ff07ae1, 0x47ae1482},			/* 0.75185=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fe7ea33, 0x910e6e4d, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.74733=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3fe7c4fb, 0x3f1bfd37, 0x3ff0cccc, 0xccccccd4},			/* 0.74279=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3fe79f82, 0x31c8563a, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.73822=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fe779c8, 0xe474258f, 0x3ff11eb8, 0x51eb8526},			/* 0.73361=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fe753d0, 0x8dd00e2c, 0x3ff147ae, 0x147ae14f},			/* 0.72898=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fe72d99, 0x9f97d17f, 0x3ff170a3, 0xd70a3d78},			/* 0.72431=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fe70724, 0xb21e6353, 0x3ff19999, 0x999999a1},			/* 0.71962=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3fe6e072, 0xba4519c7, 0x3ff1c28f, 0x5c28f5ca},			/* 0.71489=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3fe6b984, 0x45da0567, 0x3ff1eb85, 0x1eb851f3},			/* 0.71014=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fe6925a, 0x53fe967c, 0x3ff2147a, 0xe147ae1c},			/* 0.70536=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fe66af5, 0x4cd063b5, 0x3ff23d70, 0xa3d70a45},			/* 0.70055=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fe64356, 0x2f751fea, 0x3ff26666, 0x6666666e},			/* 0.69571=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fe61b7d, 0x6fc93bf1, 0x3ff28f5c, 0x28f5c297},			/* 0.69085=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fe5f36c, 0x275c77de, 0x3ff2b851, 0xeb851ec0},			/* 0.68596=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3fe5cb22, 0xe4209500, 0x3ff2e147, 0xae147ae9},			/* 0.68104=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3fe5a2a2, 0x4048de13, 0x3ff30a3d, 0x70a3d712},			/* 0.67610=f(1.19000)*/
-{10, 0,123,__LINE__, 0x3fcc320a, 0x20d668c9, 0xc01921fb, 0x54442d18},			/* 0.22027=f(-6.28318)*/
-{ 0, 0,123,__LINE__, 0xbfd103cd, 0xc80fc35f, 0xc012d97c, 0x7f3321d2},			/* -0.26585=f(-4.71238)*/
-{ 0, 0,123,__LINE__, 0xbfd378b4, 0x5e8925a1, 0xc00921fb, 0x54442d18},			/* -0.30424=f(-3.14159)*/
-{10, 0,123,__LINE__, 0x3fde3544, 0x57a1fab3, 0xbff921fb, 0x54442d18},			/* 0.47200=f(-1.57079)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},			/* 1.00000=f(0.00000)*/
-{10, 0,123,__LINE__, 0x3fde3544, 0x57a1fab3, 0x3ff921fb, 0x54442d18},			/* 0.47200=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0xbfd378b4, 0x5e8925a1, 0x400921fb, 0x54442d18},			/* -0.30424=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0xbfd103cd, 0xc80fc35f, 0x4012d97c, 0x7f3321d2},			/* -0.26585=f(4.71238)*/
-{ 9, 0,123,__LINE__, 0xbfb61c37, 0x07a54f0d, 0xc03e0000, 0x00000000},			/* -0.08636=f(-30.0000)*/
-{ 0, 0,123,__LINE__, 0xbfbbb800, 0x2bfd38ec, 0xc03c4ccc, 0xcccccccd},			/* -0.10827=f(-28.3000)*/
-{ 0, 0,123,__LINE__, 0x3fbedcde, 0x270f5071, 0xc03a9999, 0x9999999a},			/* 0.12055=f(-26.6000)*/
-{ 9, 0,123,__LINE__, 0x3fb54f99, 0xda61fbfa, 0xc038e666, 0x66666667},			/* 0.08324=f(-24.9000)*/
-{11, 0,123,__LINE__, 0xbfc36000, 0xbed4dbdd, 0xc0373333, 0x33333334},			/* -0.15136=f(-23.2000)*/
-{ 9, 0,123,__LINE__, 0xbfa90eed, 0x454ad069, 0xc0358000, 0x00000001},			/* -0.04894=f(-21.5000)*/
-{11, 0,123,__LINE__, 0x3fc6a8e0, 0x310be6f6, 0xc033cccc, 0xccccccce},			/* 0.17702=f(-19.8000)*/
-{ 0, 0,123,__LINE__, 0x3f763aae, 0xb5a1b8be, 0xc0321999, 0x9999999b},			/* 0.00542=f(-18.1000)*/
-{ 0, 0,123,__LINE__, 0xbfc915b4, 0x0f12e0c9, 0xc0306666, 0x66666668},			/* -0.19597=f(-16.4000)*/
-{ 9, 0,123,__LINE__, 0x3fa8648b, 0x05f554c8, 0xc02d6666, 0x6666666a},			/* 0.04764=f(-14.7000)*/
-{10, 0,123,__LINE__, 0x3fca7c8d, 0x4d73962a, 0xc02a0000, 0x00000004},			/* 0.20692=f(-13.0000)*/
-{ 0, 0,123,__LINE__, 0xbfbcb086, 0xd80a2a55, 0xc0269999, 0x9999999e},			/* -0.11206=f(-11.3000)*/
-{10, 0,123,__LINE__, 0xbfcabfcf, 0xefe10f3e, 0xc0233333, 0x33333338},			/* -0.20897=f(-9.60000)*/
-{ 0, 0,123,__LINE__, 0x3fc8e0dd, 0x440a6eec, 0xc01f9999, 0x999999a3},			/* 0.19436=f(-7.90000)*/
-{10, 0,123,__LINE__, 0x3fc9d2d5, 0xd283c188, 0xc018cccc, 0xccccccd6},			/* 0.20174=f(-6.20000)*/
-{ 0, 0,123,__LINE__, 0xbfd483c4, 0x83c31435, 0xc0120000, 0x00000009},			/* -0.32054=f(-4.50000)*/
-{ 0, 0,123,__LINE__, 0xbfc7af42, 0xc21f30cb, 0xc0066666, 0x66666678},			/* -0.18503=f(-2.80000)*/
-{11, 0,123,__LINE__, 0x3fe70724, 0xb21e6353, 0xbff19999, 0x999999bd},			/* 0.71962=f(-1.10000)*/
-{11, 0,123,__LINE__, 0x3fed2f24, 0xdb21a0f2, 0x3fe33333, 0x333332ec},			/* 0.91200=f(0.60000)*/
-{ 0, 0,123,__LINE__, 0x3fac6fb7, 0xb717685a, 0x40026666, 0x66666654},			/* 0.05553=f(2.30000)*/
-{10, 0,123,__LINE__, 0xbfd96ae6, 0xd31d184c, 0x400fffff, 0xffffffee},			/* -0.39714=f(4.00000)*/
-{ 0, 0,123,__LINE__, 0x3faeadd8, 0xa597404e, 0x4016cccc, 0xccccccc4},			/* 0.05992=f(5.70000)*/
-{10, 0,123,__LINE__, 0x3fd1d486, 0xa4feef4e, 0x401d9999, 0x99999991},			/* 0.27859=f(7.40000)*/
-{ 9, 0,123,__LINE__, 0xbfbd3ec6, 0x84f6f826, 0x40223333, 0x3333332f},			/* -0.11423=f(9.10000)*/
-{10, 0,123,__LINE__, 0xbfca0286, 0x33800077, 0x40259999, 0x99999995},			/* -0.20320=f(10.8000)*/
-{10, 0,123,__LINE__, 0x3fc2cd17, 0x4c1879b8, 0x4028ffff, 0xfffffffb},			/* 0.14688=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0x3fc21865, 0xe8103720, 0x402c6666, 0x66666661},			/* 0.14136=f(14.2000)*/
-{ 0, 0,123,__LINE__, 0xbfc51dc0, 0x6881c7c5, 0x402fcccc, 0xccccccc7},			/* -0.16497=f(15.9000)*/
-{ 0, 0,123,__LINE__, 0xbfb61995, 0x058b74dd, 0x40319999, 0x99999997},			/* -0.08632=f(17.6000)*/
-{ 0, 0,123,__LINE__, 0x3fc5e6d7, 0xe04c72f3, 0x40334ccc, 0xccccccca},			/* 0.17110=f(19.3000)*/
-{ 9, 0,123,__LINE__, 0x3fa2ba7f, 0x3087b88d, 0x4034ffff, 0xfffffffd},			/* 0.03657=f(21.0000)*/
-{10, 0,123,__LINE__, 0xbfc55c69, 0x07d3ae71, 0x4036b333, 0x33333330},			/* -0.16688=f(22.7000)*/
-{ 8, 0,123,__LINE__, 0x3f7f6fbd, 0xdd10e25e, 0x40386666, 0x66666663},			/* 0.00767=f(24.4000)*/
-{11, 0,123,__LINE__, 0x3fc3ad27, 0xccd11c22, 0x403a1999, 0x99999996},			/* 0.15372=f(26.1000)*/
-{ 9, 0,123,__LINE__, 0xbfa76175, 0xe5ae6e65, 0x403bcccc, 0xccccccc9},			/* -0.04566=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0xbfc10afd, 0x7ae2e789, 0x403d7fff, 0xfffffffc},			/* -0.13314=f(29.5000)*/
-0,};
-test_j0f(m)   {run_vector_1(m,j0f_vec,(char *)(j0f),"j0f","ff");   }	
diff --git a/newlib/libm/test/j1_vec.c b/newlib/libm/test/j1_vec.c
deleted file mode 100644
index 27bbce6c3..000000000
--- a/newlib/libm/test/j1_vec.c
+++ /dev/null
@@ -1,285 +0,0 @@
-#include "test.h"
- one_line_type j1_vec[] = {
-{64, 0,123,__LINE__, 0xbfdfe3f7, 0xc98d2cad, 0xbff33333, 0x33333333},			/* -0.49828=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbfdfb9be, 0x60162ce1, 0xbff30a3d, 0x70a3d70a},			/* -0.49571=f(-1.19000)*/
-{62, 0,123,__LINE__, 0xbfdf8eec, 0x64ca92ed, 0xbff2e147, 0xae147ae1},			/* -0.49309=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xbfdf6382, 0x95db2d21, 0xbff2b851, 0xeb851eb8},			/* -0.49044=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbfdf3781, 0xb4ad13e2, 0xbff28f5c, 0x28f5c28f},			/* -0.48776=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfdf0aea, 0x85d5bf16, 0xbff26666, 0x66666666},			/* -0.48504=f(-1.15000)*/
-{63, 0,123,__LINE__, 0xbfdeddbd, 0xd1170952, 0xbff23d70, 0xa3d70a3d},			/* -0.48228=f(-1.14000)*/
-{63, 0,123,__LINE__, 0xbfdeaffc, 0x615b2106, 0xbff2147a, 0xe147ae14},			/* -0.47949=f(-1.13000)*/
-{63, 0,123,__LINE__, 0xbfde81a7, 0x04b0679a, 0xbff1eb85, 0x1eb851eb},			/* -0.47666=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfde52be, 0x8c453eac, 0xbff1c28f, 0x5c28f5c2},			/* -0.47380=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfde2343, 0xcc63c37b, 0xbff19999, 0x99999999},			/* -0.47090=f(-1.10000)*/
-{63, 0,123,__LINE__, 0xbfddf337, 0x9c6d7898, 0xbff170a3, 0xd70a3d70},			/* -0.46796=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfddc29a, 0xd6d6ddf8, 0xbff147ae, 0x147ae147},			/* -0.46500=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfdd916e, 0x5922f77c, 0xbff11eb8, 0x51eb851e},			/* -0.46200=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfdd5fb3, 0x03dec20f, 0xbff0f5c2, 0x8f5c28f5},			/* -0.45896=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfdd2d69, 0xba9c976a, 0xbff0cccc, 0xcccccccc},			/* -0.45589=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbfdcfa93, 0x63ef809a, 0xbff0a3d7, 0x0a3d70a3},			/* -0.45279=f(-1.04000)*/
-{61, 0,123,__LINE__, 0xbfdcc730, 0xe966776b, 0xbff07ae1, 0x47ae147a},			/* -0.44965=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfdc9343, 0x378796ca, 0xbff051eb, 0x851eb851},			/* -0.44648=f(-1.02000)*/
-{63, 0,123,__LINE__, 0xbfdc5ecb, 0x3dcb3a36, 0xbff028f5, 0xc28f5c28},			/* -0.44328=f(-1.01000)*/
-{63, 0,123,__LINE__, 0xbfdc29c9, 0xee970c6b, 0xbfefffff, 0xfffffffe},			/* -0.44005=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfdbf440, 0x3f39054b, 0xbfefae14, 0x7ae147ac},			/* -0.43678=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfdbbe2f, 0x27e2573a, 0xbfef5c28, 0xf5c28f5a},			/* -0.43348=f(-0.98000)*/
-{61, 0,123,__LINE__, 0xbfdb8797, 0xa3a24bfc, 0xbfef0a3d, 0x70a3d708},			/* -0.43015=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfdb507a, 0xb061112a, 0xbfeeb851, 0xeb851eb6},			/* -0.42678=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfdb18d9, 0x4eda7472, 0xbfee6666, 0x66666664},			/* -0.42339=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfdae0b4, 0x82988faf, 0xbfee147a, 0xe147ae12},			/* -0.41996=f(-0.94000)*/
-{62, 0,123,__LINE__, 0xbfdaa80d, 0x51ee64f6, 0xbfedc28f, 0x5c28f5c0},			/* -0.41650=f(-0.93000)*/
-{62, 0,123,__LINE__, 0xbfda6ee4, 0xc5f26abe, 0xbfed70a3, 0xd70a3d6e},			/* -0.41301=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfda353b, 0xea790847, 0xbfed1eb8, 0x51eb851c},			/* -0.40949=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfd9fb13, 0xce0f024b, 0xbfeccccc, 0xccccccca},			/* -0.40594=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfd9c06d, 0x81f3d82b, 0xbfec7ae1, 0x47ae1478},			/* -0.40236=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfd9854a, 0x1a1411af, 0xbfec28f5, 0xc28f5c26},			/* -0.39876=f(-0.88000)*/
-{63, 0,123,__LINE__, 0xbfd949aa, 0xad037d84, 0xbfebd70a, 0x3d70a3d4},			/* -0.39512=f(-0.87000)*/
-{60, 0,123,__LINE__, 0xbfd90d90, 0x53f76088, 0xbfeb851e, 0xb851eb82},			/* -0.39145=f(-0.86000)*/
-{62, 0,123,__LINE__, 0xbfd8d0fc, 0x2ac09606, 0xbfeb3333, 0x33333330},			/* -0.38775=f(-0.85000)*/
-{63, 0,123,__LINE__, 0xbfd893ef, 0x4fc5a123, 0xbfeae147, 0xae147ade},			/* -0.38402=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfd8566a, 0xe3fcaf6b, 0xbfea8f5c, 0x28f5c28c},			/* -0.38027=f(-0.83000)*/
-{63, 0,123,__LINE__, 0xbfd81870, 0x0ae58cce, 0xbfea3d70, 0xa3d70a3a},			/* -0.37649=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfd7d9ff, 0xea83890c, 0xbfe9eb85, 0x1eb851e8},			/* -0.37268=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfd79b1b, 0xab574eca, 0xbfe99999, 0x99999996},			/* -0.36884=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfd75bc4, 0x7858ac6c, 0xbfe947ae, 0x147ae144},			/* -0.36497=f(-0.79000)*/
-{62, 0,123,__LINE__, 0xbfd71bfb, 0x7ef04ed6, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.36108=f(-0.78000)*/
-{62, 0,123,__LINE__, 0xbfd6dbc1, 0xeef16e2a, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.35716=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfd69b18, 0xfa936cd0, 0xbfe851eb, 0x851eb84e},			/* -0.35321=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfd65a01, 0xd66b68b9, 0xbfe7ffff, 0xfffffffc},			/* -0.34924=f(-0.75000)*/
-{61, 0,123,__LINE__, 0xbfd6187d, 0xb965bf24, 0xbfe7ae14, 0x7ae147aa},			/* -0.34524=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfd5d68d, 0xdcbf82f6, 0xbfe75c28, 0xf5c28f58},			/* -0.34122=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfd59433, 0x7bffe5ea, 0xbfe70a3d, 0x70a3d706},			/* -0.33717=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfd5516f, 0xd4f19487, 0xbfe6b851, 0xeb851eb4},			/* -0.33309=f(-0.71000)*/
-{62, 0,123,__LINE__, 0xbfd50e44, 0x279c0541, 0xbfe66666, 0x66666662},			/* -0.32899=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfd4cab1, 0xb63cbabe, 0xbfe6147a, 0xe147ae10},			/* -0.32487=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfd486b9, 0xc540796d, 0xbfe5c28f, 0x5c28f5be},			/* -0.32072=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfd4425d, 0x9b3c70b3, 0xbfe570a3, 0xd70a3d6c},			/* -0.31655=f(-0.67000)*/
-{62, 0,123,__LINE__, 0xbfd3fd9e, 0x80e757a9, 0xbfe51eb8, 0x51eb851a},			/* -0.31235=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfd3b87d, 0xc1127db7, 0xbfe4cccc, 0xccccccc8},			/* -0.30813=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfd372fc, 0xa8a2cf16, 0xbfe47ae1, 0x47ae1476},			/* -0.30389=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfd32d1c, 0x8689cd80, 0xbfe428f5, 0xc28f5c24},			/* -0.29962=f(-0.63000)*/
-{63, 0,123,__LINE__, 0xbfd2e6de, 0xabbe7d19, 0xbfe3d70a, 0x3d70a3d2},			/* -0.29534=f(-0.62000)*/
-{63, 0,123,__LINE__, 0xbfd2a044, 0x6b3645c9, 0xbfe3851e, 0xb851eb80},			/* -0.29103=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfd2594f, 0x19ddc92b, 0xbfe33333, 0x3333332e},			/* -0.28670=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfd21200, 0x0e91ad45, 0xbfe2e147, 0xae147adc},			/* -0.28234=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfd1ca58, 0xa2175c15, 0xbfe28f5c, 0x28f5c28a},			/* -0.27797=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfd1825a, 0x2f15b843, 0xbfe23d70, 0xa3d70a38},			/* -0.27358=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfd13a06, 0x120dc6fe, 0xbfe1eb85, 0x1eb851e6},			/* -0.26916=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfd0f15d, 0xa9534f4f, 0xbfe19999, 0x99999994},			/* -0.26473=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfd0a862, 0x55056ee9, 0xbfe147ae, 0x147ae142},			/* -0.26027=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfd05f15, 0x770724c1, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.25580=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfd01578, 0x72f7d185, 0xbfe0a3d7, 0x0a3d709e},			/* -0.25131=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfcf9719, 0x5c575c35, 0xbfe051eb, 0x851eb84c},			/* -0.24679=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfcf02a7, 0x1f4870cc, 0xbfdfffff, 0xfffffff4},			/* -0.24226=f(-0.50000)*/
-{63, 0,123,__LINE__, 0xbfce6d9d, 0x00112cd6, 0xbfdf5c28, 0xf5c28f50},			/* -0.23772=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfcdd7fd, 0xd33be007, 0xbfdeb851, 0xeb851eac},			/* -0.23315=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfcd41cc, 0x707f7ea2, 0xbfde147a, 0xe147ae08},			/* -0.22857=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfccab0b, 0xb2b0302a, 0xbfdd70a3, 0xd70a3d64},			/* -0.22396=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfcc13be, 0x77afcc47, 0xbfdccccc, 0xccccccc0},			/* -0.21935=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfcb7be7, 0xa05e461e, 0xbfdc28f5, 0xc28f5c1c},			/* -0.21471=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfcae38a, 0x108a068f, 0xbfdb851e, 0xb851eb78},			/* -0.21006=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfca4aa8, 0xaee035a2, 0xbfdae147, 0xae147ad4},			/* -0.20540=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfc9b146, 0x64dcf383, 0xbfda3d70, 0xa3d70a30},			/* -0.20072=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfc91766, 0x1ebb816a, 0xbfd99999, 0x9999998c},			/* -0.19602=f(-0.40000)*/
-{63, 0,123,__LINE__, 0xbfc87d0a, 0xcb665abf, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.19131=f(-0.39000)*/
-{61, 0,123,__LINE__, 0xbfc7e237, 0x5c673edc, 0xbfd851eb, 0x851eb844},			/* -0.18659=f(-0.38000)*/
-{63, 0,123,__LINE__, 0xbfc746ee, 0xc5d72bd8, 0xbfd7ae14, 0x7ae147a0},			/* -0.18185=f(-0.37000)*/
-{63, 0,123,__LINE__, 0xbfc6ab33, 0xfe4e4a90, 0xbfd70a3d, 0x70a3d6fc},			/* -0.17709=f(-0.36000)*/
-{63, 0,123,__LINE__, 0xbfc60f09, 0xfed3cc72, 0xbfd66666, 0x66666658},			/* -0.17233=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfc57273, 0xc2cdbb4f, 0xbfd5c28f, 0x5c28f5b4},			/* -0.16755=f(-0.34000)*/
-{62, 0,123,__LINE__, 0xbfc4d574, 0x47f0bb91, 0xbfd51eb8, 0x51eb8510},			/* -0.16276=f(-0.33000)*/
-{62, 0,123,__LINE__, 0xbfc4380e, 0x8e2fc149, 0xbfd47ae1, 0x47ae146c},			/* -0.15796=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfc39a45, 0x97abb851, 0xbfd3d70a, 0x3d70a3c8},			/* -0.15314=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfc2fc1c, 0x68a31ff4, 0xbfd33333, 0x33333324},			/* -0.14831=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfc25d96, 0x07619a7a, 0xbfd28f5c, 0x28f5c280},			/* -0.14348=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfc1beb5, 0x7c2f70f1, 0xbfd1eb85, 0x1eb851dc},			/* -0.13863=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfc11f7d, 0xd1410b8e, 0xbfd147ae, 0x147ae138},			/* -0.13377=f(-0.27000)*/
-{63, 0,123,__LINE__, 0xbfc07ff2, 0x12a65f0c, 0xbfd0a3d7, 0x0a3d7094},			/* -0.12890=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfbfc02a, 0x9c749eca, 0xbfcfffff, 0xffffffe0},			/* -0.12402=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfbe7fd5, 0x27241087, 0xbfceb851, 0xeb851e98},			/* -0.11913=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfbd3ee9, 0xe7d8971c, 0xbfcd70a3, 0xd70a3d50},			/* -0.11424=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfbbfd6f, 0x04416cce, 0xbfcc28f5, 0xc28f5c08},			/* -0.10933=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfbabb6a, 0xa51dfa12, 0xbfcae147, 0xae147ac0},			/* -0.10442=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfb978e2, 0xf61c3bb4, 0xbfc99999, 0x99999978},			/* -0.09950=f(-0.20000)*/
-{62, 0,123,__LINE__, 0xbfb835de, 0x25b71825, 0xbfc851eb, 0x851eb830},			/* -0.09457=f(-0.19000)*/
-{62, 0,123,__LINE__, 0xbfb6f262, 0x6514a4ce, 0xbfc70a3d, 0x70a3d6e8},			/* -0.08963=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfb5ae75, 0xe7e45bff, 0xbfc5c28f, 0x5c28f5a0},			/* -0.08469=f(-0.17000)*/
-{63, 0,123,__LINE__, 0xbfb46a1e, 0xe43d4469, 0xbfc47ae1, 0x47ae1458},			/* -0.07974=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfb32563, 0x927c0aba, 0xbfc33333, 0x33333310},			/* -0.07478=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfb1e04a, 0x2d210e45, 0xbfc1eb85, 0x1eb851c8},			/* -0.06982=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfb09ad8, 0xf0ae6157, 0xbfc0a3d7, 0x0a3d7080},			/* -0.06486=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfaeaa2c, 0x370b7c26, 0xbfbeb851, 0xeb851e71},			/* -0.05989=f(-0.12000)*/
-{62, 0,123,__LINE__, 0xbfac1e0f, 0xdb8ce112, 0xbfbc28f5, 0xc28f5be2},			/* -0.05491=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfa99169, 0x52566db6, 0xbfb99999, 0x99999953},			/* -0.04993=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfa70445, 0x21d0304a, 0xbfb70a3d, 0x70a3d6c4},			/* -0.04495=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfa476af, 0xd31065de, 0xbfb47ae1, 0x47ae1435},			/* -0.03996=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfa1e8b5, 0xf19707ed, 0xbfb1eb85, 0x1eb851a6},			/* -0.03497=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbf9eb4c8, 0x16129820, 0xbfaeb851, 0xeb851e2d},			/* -0.02998=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbf99978d, 0x5dda2ed1, 0xbfa99999, 0x9999990e},			/* -0.02499=f(-0.05000)*/
-{60, 0,123,__LINE__, 0xbf9479d4, 0xdcc8ce88, 0xbfa47ae1, 0x47ae13ef},			/* -0.01999=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf8eb76f, 0x6fa2c211, 0xbf9eb851, 0xeb851da0},			/* -0.01499=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf847a9e, 0x2c18dd61, 0xbf947ae1, 0x47ae1362},			/* -0.00999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf747ad0, 0x80bb0662, 0xbf847ae1, 0x47ae1249},			/* -0.00499=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cc19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 4.87457e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f747ad0, 0x80bb0ac6, 0x3f847ae1, 0x47ae16ad},			/* 0.00499=f(0.01000)*/
-{61, 0,123,__LINE__, 0x3f847a9e, 0x2c18df94, 0x3f947ae1, 0x47ae1594},			/* 0.00999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f8eb76f, 0x6fa2c443, 0x3f9eb851, 0xeb851fd2},			/* 0.01499=f(0.03000)*/
-{63, 0,123,__LINE__, 0x3f9479d4, 0xdcc8cfa0, 0x3fa47ae1, 0x47ae1508},			/* 0.01999=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3f99978d, 0x5dda2fe9, 0x3fa99999, 0x99999a27},			/* 0.02499=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3f9eb4c8, 0x16129939, 0x3faeb851, 0xeb851f46},			/* 0.02998=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fa1e8b5, 0xf1970879, 0x3fb1eb85, 0x1eb85232},			/* 0.03497=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fa476af, 0xd310666a, 0x3fb47ae1, 0x47ae14c1},			/* 0.03996=f(0.08000)*/
-{63, 0,123,__LINE__, 0x3fa70445, 0x21d030d6, 0x3fb70a3d, 0x70a3d750},			/* 0.04495=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fa99169, 0x52566e42, 0x3fb99999, 0x999999df},			/* 0.04993=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fac1e0f, 0xdb8ce19c, 0x3fbc28f5, 0xc28f5c6e},			/* 0.05491=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3faeaa2c, 0x370b7cb1, 0x3fbeb851, 0xeb851efd},			/* 0.05989=f(0.12000)*/
-{63, 0,123,__LINE__, 0x3fb09ad8, 0xf0ae619d, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.06486=f(0.13000)*/
-{63, 0,123,__LINE__, 0x3fb1e04a, 0x2d210e8b, 0x3fc1eb85, 0x1eb8520e},			/* 0.06982=f(0.14000)*/
-{55, 0,123,__LINE__, 0x3fb32563, 0x927c0b00, 0x3fc33333, 0x33333356},			/* 0.07478=f(0.15000)*/
-{62, 0,123,__LINE__, 0x3fb46a1e, 0xe43d44ae, 0x3fc47ae1, 0x47ae149e},			/* 0.07974=f(0.16000)*/
-{63, 0,123,__LINE__, 0x3fb5ae75, 0xe7e45c44, 0x3fc5c28f, 0x5c28f5e6},			/* 0.08469=f(0.17000)*/
-{63, 0,123,__LINE__, 0x3fb6f262, 0x6514a513, 0x3fc70a3d, 0x70a3d72e},			/* 0.08963=f(0.18000)*/
-{63, 0,123,__LINE__, 0x3fb835de, 0x25b7186a, 0x3fc851eb, 0x851eb876},			/* 0.09457=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fb978e2, 0xf61c3bf9, 0x3fc99999, 0x999999be},			/* 0.09950=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fbabb6a, 0xa51dfa57, 0x3fcae147, 0xae147b06},			/* 0.10442=f(0.21000)*/
-{63, 0,123,__LINE__, 0x3fbbfd6f, 0x04416d13, 0x3fcc28f5, 0xc28f5c4e},			/* 0.10933=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fbd3ee9, 0xe7d89761, 0x3fcd70a3, 0xd70a3d96},			/* 0.11424=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fbe7fd5, 0x272410cc, 0x3fceb851, 0xeb851ede},			/* 0.11913=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fbfc02a, 0x9c749f0e, 0x3fd00000, 0x00000013},			/* 0.12402=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fc07ff2, 0x12a65f2e, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.12890=f(0.26000)*/
-{63, 0,123,__LINE__, 0x3fc11f7d, 0xd1410bb0, 0x3fd147ae, 0x147ae15b},			/* 0.13377=f(0.27000)*/
-{63, 0,123,__LINE__, 0x3fc1beb5, 0x7c2f7113, 0x3fd1eb85, 0x1eb851ff},			/* 0.13863=f(0.28000)*/
-{61, 0,123,__LINE__, 0x3fc25d96, 0x07619a9c, 0x3fd28f5c, 0x28f5c2a3},			/* 0.14348=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fc2fc1c, 0x68a32015, 0x3fd33333, 0x33333347},			/* 0.14831=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fc39a45, 0x97abb873, 0x3fd3d70a, 0x3d70a3eb},			/* 0.15314=f(0.31000)*/
-{61, 0,123,__LINE__, 0x3fc4380e, 0x8e2fc16c, 0x3fd47ae1, 0x47ae148f},			/* 0.15796=f(0.32000)*/
-{61, 0,123,__LINE__, 0x3fc4d574, 0x47f0bbb4, 0x3fd51eb8, 0x51eb8533},			/* 0.16276=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fc57273, 0xc2cdbb70, 0x3fd5c28f, 0x5c28f5d7},			/* 0.16755=f(0.34000)*/
-{63, 0,123,__LINE__, 0x3fc60f09, 0xfed3cc95, 0x3fd66666, 0x6666667b},			/* 0.17233=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fc6ab33, 0xfe4e4ab2, 0x3fd70a3d, 0x70a3d71f},			/* 0.17709=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fc746ee, 0xc5d72bf9, 0x3fd7ae14, 0x7ae147c3},			/* 0.18185=f(0.37000)*/
-{62, 0,123,__LINE__, 0x3fc7e237, 0x5c673efe, 0x3fd851eb, 0x851eb867},			/* 0.18659=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fc87d0a, 0xcb665ae0, 0x3fd8f5c2, 0x8f5c290b},			/* 0.19131=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fc91766, 0x1ebb818c, 0x3fd99999, 0x999999af},			/* 0.19602=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fc9b146, 0x64dcf3a5, 0x3fda3d70, 0xa3d70a53},			/* 0.20072=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fca4aa8, 0xaee035c2, 0x3fdae147, 0xae147af7},			/* 0.20540=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fcae38a, 0x108a06af, 0x3fdb851e, 0xb851eb9b},			/* 0.21006=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fcb7be7, 0xa05e463e, 0x3fdc28f5, 0xc28f5c3f},			/* 0.21471=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fcc13be, 0x77afcc68, 0x3fdccccc, 0xcccccce3},			/* 0.21935=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fccab0b, 0xb2b0304a, 0x3fdd70a3, 0xd70a3d87},			/* 0.22396=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fcd41cc, 0x707f7ec2, 0x3fde147a, 0xe147ae2b},			/* 0.22857=f(0.47000)*/
-{63, 0,123,__LINE__, 0x3fcdd7fd, 0xd33be029, 0x3fdeb851, 0xeb851ecf},			/* 0.23315=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fce6d9d, 0x00112cf6, 0x3fdf5c28, 0xf5c28f73},			/* 0.23772=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fcf02a7, 0x1f4870ea, 0x3fe00000, 0x0000000b},			/* 0.24226=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fcf9719, 0x5c575c53, 0x3fe051eb, 0x851eb85d},			/* 0.24679=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fd01578, 0x72f7d194, 0x3fe0a3d7, 0x0a3d70af},			/* 0.25131=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fd05f15, 0x770724d1, 0x3fe0f5c2, 0x8f5c2901},			/* 0.25580=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fd0a862, 0x55056ef8, 0x3fe147ae, 0x147ae153},			/* 0.26027=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fd0f15d, 0xa9534f5e, 0x3fe19999, 0x999999a5},			/* 0.26473=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fd13a06, 0x120dc70d, 0x3fe1eb85, 0x1eb851f7},			/* 0.26916=f(0.56000)*/
-{62, 0,123,__LINE__, 0x3fd1825a, 0x2f15b852, 0x3fe23d70, 0xa3d70a49},			/* 0.27358=f(0.57000)*/
-{63, 0,123,__LINE__, 0x3fd1ca58, 0xa2175c24, 0x3fe28f5c, 0x28f5c29b},			/* 0.27797=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fd21200, 0x0e91ad54, 0x3fe2e147, 0xae147aed},			/* 0.28234=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fd2594f, 0x19ddc93a, 0x3fe33333, 0x3333333f},			/* 0.28670=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3fd2a044, 0x6b3645d6, 0x3fe3851e, 0xb851eb91},			/* 0.29103=f(0.61000)*/
-{60, 0,123,__LINE__, 0x3fd2e6de, 0xabbe7d27, 0x3fe3d70a, 0x3d70a3e3},			/* 0.29534=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fd32d1c, 0x8689cd8e, 0x3fe428f5, 0xc28f5c35},			/* 0.29962=f(0.63000)*/
-{63, 0,123,__LINE__, 0x3fd372fc, 0xa8a2cf24, 0x3fe47ae1, 0x47ae1487},			/* 0.30389=f(0.64000)*/
-{62, 0,123,__LINE__, 0x3fd3b87d, 0xc1127dc6, 0x3fe4cccc, 0xccccccd9},			/* 0.30813=f(0.65000)*/
-{63, 0,123,__LINE__, 0x3fd3fd9e, 0x80e757b8, 0x3fe51eb8, 0x51eb852b},			/* 0.31235=f(0.66000)*/
-{62, 0,123,__LINE__, 0x3fd4425d, 0x9b3c70c1, 0x3fe570a3, 0xd70a3d7d},			/* 0.31655=f(0.67000)*/
-{61, 0,123,__LINE__, 0x3fd486b9, 0xc540797b, 0x3fe5c28f, 0x5c28f5cf},			/* 0.32072=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fd4cab1, 0xb63cbacc, 0x3fe6147a, 0xe147ae21},			/* 0.32487=f(0.69000)*/
-{63, 0,123,__LINE__, 0x3fd50e44, 0x279c0551, 0x3fe66666, 0x66666673},			/* 0.32899=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fd5516f, 0xd4f19495, 0x3fe6b851, 0xeb851ec5},			/* 0.33309=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fd59433, 0x7bffe5f8, 0x3fe70a3d, 0x70a3d717},			/* 0.33717=f(0.72000)*/
-{63, 0,123,__LINE__, 0x3fd5d68d, 0xdcbf8304, 0x3fe75c28, 0xf5c28f69},			/* 0.34122=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fd6187d, 0xb965bf31, 0x3fe7ae14, 0x7ae147bb},			/* 0.34524=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fd65a01, 0xd66b68c7, 0x3fe80000, 0x0000000d},			/* 0.34924=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fd69b18, 0xfa936cdd, 0x3fe851eb, 0x851eb85f},			/* 0.35321=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fd6dbc1, 0xeef16e37, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.35716=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fd71bfb, 0x7ef04ee3, 0x3fe8f5c2, 0x8f5c2903},			/* 0.36108=f(0.78000)*/
-{62, 0,123,__LINE__, 0x3fd75bc4, 0x7858ac79, 0x3fe947ae, 0x147ae155},			/* 0.36497=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fd79b1b, 0xab574ed7, 0x3fe99999, 0x999999a7},			/* 0.36884=f(0.80000)*/
-{62, 0,123,__LINE__, 0x3fd7d9ff, 0xea838919, 0x3fe9eb85, 0x1eb851f9},			/* 0.37268=f(0.81000)*/
-{61, 0,123,__LINE__, 0x3fd81870, 0x0ae58cdb, 0x3fea3d70, 0xa3d70a4b},			/* 0.37649=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fd8566a, 0xe3fcaf78, 0x3fea8f5c, 0x28f5c29d},			/* 0.38027=f(0.83000)*/
-{63, 0,123,__LINE__, 0x3fd893ef, 0x4fc5a12f, 0x3feae147, 0xae147aef},			/* 0.38402=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fd8d0fc, 0x2ac09612, 0x3feb3333, 0x33333341},			/* 0.38775=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fd90d90, 0x53f76094, 0x3feb851e, 0xb851eb93},			/* 0.39145=f(0.86000)*/
-{62, 0,123,__LINE__, 0x3fd949aa, 0xad037d91, 0x3febd70a, 0x3d70a3e5},			/* 0.39512=f(0.87000)*/
-{61, 0,123,__LINE__, 0x3fd9854a, 0x1a1411bb, 0x3fec28f5, 0xc28f5c37},			/* 0.39876=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fd9c06d, 0x81f3d837, 0x3fec7ae1, 0x47ae1489},			/* 0.40236=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fd9fb13, 0xce0f0257, 0x3feccccc, 0xccccccdb},			/* 0.40594=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fda353b, 0xea790853, 0x3fed1eb8, 0x51eb852d},			/* 0.40949=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fda6ee4, 0xc5f26ac9, 0x3fed70a3, 0xd70a3d7f},			/* 0.41301=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fdaa80d, 0x51ee6500, 0x3fedc28f, 0x5c28f5d1},			/* 0.41650=f(0.93000)*/
-{63, 0,123,__LINE__, 0x3fdae0b4, 0x82988fbb, 0x3fee147a, 0xe147ae23},			/* 0.41996=f(0.94000)*/
-{62, 0,123,__LINE__, 0x3fdb18d9, 0x4eda747e, 0x3fee6666, 0x66666675},			/* 0.42339=f(0.95000)*/
-{62, 0,123,__LINE__, 0x3fdb507a, 0xb0611136, 0x3feeb851, 0xeb851ec7},			/* 0.42678=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fdb8797, 0xa3a24c08, 0x3fef0a3d, 0x70a3d719},			/* 0.43015=f(0.97000)*/
-{62, 0,123,__LINE__, 0x3fdbbe2f, 0x27e25746, 0x3fef5c28, 0xf5c28f6b},			/* 0.43348=f(0.98000)*/
-{62, 0,123,__LINE__, 0x3fdbf440, 0x3f390555, 0x3fefae14, 0x7ae147bd},			/* 0.43678=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fdc29c9, 0xee970c75, 0x3ff00000, 0x00000007},			/* 0.44005=f(1.00000)*/
-{62, 0,123,__LINE__, 0x3fdc5ecb, 0x3dcb3a42, 0x3ff028f5, 0xc28f5c30},			/* 0.44328=f(1.01000)*/
-{63, 0,123,__LINE__, 0x3fdc9343, 0x378796d5, 0x3ff051eb, 0x851eb859},			/* 0.44648=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fdcc730, 0xe9667776, 0x3ff07ae1, 0x47ae1482},			/* 0.44965=f(1.03000)*/
-{63, 0,123,__LINE__, 0x3fdcfa93, 0x63ef80a4, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.45279=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fdd2d69, 0xba9c9775, 0x3ff0cccc, 0xccccccd4},			/* 0.45589=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fdd5fb3, 0x03dec21a, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.45896=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fdd916e, 0x5922f785, 0x3ff11eb8, 0x51eb8526},			/* 0.46200=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fddc29a, 0xd6d6de01, 0x3ff147ae, 0x147ae14f},			/* 0.46500=f(1.08000)*/
-{62, 0,123,__LINE__, 0x3fddf337, 0x9c6d78a1, 0x3ff170a3, 0xd70a3d78},			/* 0.46796=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fde2343, 0xcc63c385, 0x3ff19999, 0x999999a1},			/* 0.47090=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fde52be, 0x8c453eb5, 0x3ff1c28f, 0x5c28f5ca},			/* 0.47380=f(1.11000)*/
-{61, 0,123,__LINE__, 0x3fde81a7, 0x04b067a4, 0x3ff1eb85, 0x1eb851f3},			/* 0.47666=f(1.12000)*/
-{63, 0,123,__LINE__, 0x3fdeaffc, 0x615b210e, 0x3ff2147a, 0xe147ae1c},			/* 0.47949=f(1.13000)*/
-{61, 0,123,__LINE__, 0x3fdeddbd, 0xd117095b, 0x3ff23d70, 0xa3d70a45},			/* 0.48228=f(1.14000)*/
-{63, 0,123,__LINE__, 0x3fdf0aea, 0x85d5bf1e, 0x3ff26666, 0x6666666e},			/* 0.48504=f(1.15000)*/
-{61, 0,123,__LINE__, 0x3fdf3781, 0xb4ad13ec, 0x3ff28f5c, 0x28f5c297},			/* 0.48776=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fdf6382, 0x95db2d2a, 0x3ff2b851, 0xeb851ec0},			/* 0.49044=f(1.17000)*/
-{63, 0,123,__LINE__, 0x3fdf8eec, 0x64ca92f6, 0x3ff2e147, 0xae147ae9},			/* 0.49309=f(1.18000)*/
-{63, 0,123,__LINE__, 0x3fdfb9be, 0x60162ceb, 0x3ff30a3d, 0x70a3d712},			/* 0.49571=f(1.19000)*/
-{54, 0,123,__LINE__, 0xbfd23723, 0x45b96613, 0xc00921fb, 0x54442d18},			/* -0.28461=f(-3.14159)*/
-{58, 0,123,__LINE__, 0xbfe2236c, 0x458df176, 0xbff921fb, 0x54442d18},			/* -0.56682=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{62, 0,123,__LINE__, 0x3fe2236c, 0x458df176, 0x3ff921fb, 0x54442d18},			/* 0.56682=f(1.57079)*/
-{61, 0,123,__LINE__, 0x3fd23723, 0x45b96613, 0x400921fb, 0x54442d18},			/* 0.28461=f(3.14159)*/
-{58, 0,123,__LINE__, 0xbfd206ae, 0xe4af911e, 0x4012d97c, 0x7f3321d2},			/* -0.28165=f(4.71238)*/
-{64, 0,123,__LINE__, 0x3fbe6678, 0x3a4dbbb0, 0xc03e0000, 0x00000000},			/* 0.11875=f(-30.0000)*/
-{58, 0,123,__LINE__, 0xbfba145c, 0x2bf5d6a7, 0xc03c4ccc, 0xcccccccd},			/* -0.10187=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xbfb965bd, 0xda59f829, 0xc03a9999, 0x9999999a},			/* -0.09920=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x3fc142f3, 0x9995533a, 0xc038e666, 0x66666667},			/* 0.13485=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x3fb20dc7, 0xda3ce59d, 0xc0373333, 0x33333334},			/* 0.07052=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbfc4f91a, 0xe3f53776, 0xc0358000, 0x00000001},			/* -0.16385=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xbfa0cd5b, 0xcd3ea881, 0xc033cccc, 0xccccccce},			/* -0.03281=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x3fc7fb17, 0x3dcfcf2e, 0xc0321999, 0x9999999b},			/* 0.18735=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xbf8c74d0, 0x79162d3e, 0xc0306666, 0x66666668},			/* -0.01389=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbfca24e7, 0xd2d25d15, 0xc02d6666, 0x6666666a},			/* -0.20425=f(-14.7000)*/
-{62, 0,123,__LINE__, 0x3fb2005d, 0x262e73c0, 0xc02a0000, 0x00000004},			/* 0.07031=f(-13.0000)*/
-{62, 0,123,__LINE__, 0x3fcb6cb5, 0x6d484cf6, 0xc0269999, 0x9999999e},			/* 0.21425=f(-11.3000)*/
-{63, 0,123,__LINE__, 0xbfc1dbf2, 0xf3b411d1, 0xc0233333, 0x33333338},			/* -0.13952=f(-9.60000)*/
-
-{57, 0,123,__LINE__, 0x3fcdd035, 0xc7235639, 0xc018cccc, 0xccccccd6},			/* 0.23291=f(-6.20000)*/
-{52, 0,123,__LINE__, 0x3fcd9363, 0x634158b5, 0xc0120000, 0x00000009},			/* 0.23106=f(-4.50000)*/
-{57, 0,123,__LINE__, 0xbfda38ad, 0x22065bec, 0xc0066666, 0x66666678},			/* -0.40970=f(-2.80000)*/
-{60, 0,123,__LINE__, 0xbfde2343, 0xcc63c3a5, 0xbff19999, 0x999999bd},			/* -0.47090=f(-1.10000)*/
-{61, 0,123,__LINE__, 0x3fd2594f, 0x19ddc8f2, 0x3fe33333, 0x333332ec},			/* 0.28670=f(0.60000)*/
-{63, 0,123,__LINE__, 0x3fe146a2, 0xc2f16a4e, 0x40026666, 0x66666654},			/* 0.53987=f(2.30000)*/
-{58, 0,123,__LINE__, 0xbfb0e837, 0x2dfae9d8, 0x400fffff, 0xffffffee},			/* -0.06604=f(4.00000)*/
-{59, 0,123,__LINE__, 0xbfd4bed5, 0xe968696f, 0x4016cccc, 0xccccccc4},			/* -0.32414=f(5.70000)*/
-{54, 0,123,__LINE__, 0x3fbc1063, 0xe5380213, 0x401d9999, 0x99999991},			/* 0.10962=f(7.40000)*/
-{59, 0,123,__LINE__, 0x3fcdc04a, 0x68314a0d, 0x40223333, 0x3333332f},			/* 0.23243=f(9.10000)*/
-{54, 0,123,__LINE__, 0xbfc23283, 0x9cb6bbfa, 0x40259999, 0x99999995},			/* -0.14216=f(10.8000)*/
-{59, 0,123,__LINE__, 0xbfc52e92, 0xc46b4553, 0x4028ffff, 0xfffffffb},			/* -0.16548=f(12.5000)*/
-{62, 0,123,__LINE__, 0x3fc4d06d, 0xb4af245c, 0x402c6666, 0x66666661},			/* 0.16261=f(14.2000)*/
-{59, 0,123,__LINE__, 0x3fbba7b7, 0x3ee07310, 0x402fcccc, 0xccccccc7},			/* 0.10802=f(15.9000)*/
-{62, 0,123,__LINE__, 0xbfc60238, 0x43170350, 0x40319999, 0x99999997},			/* -0.17194=f(17.6000)*/
-{64, 0,123,__LINE__, 0xbfacdf50, 0xf93779aa, 0x40334ccc, 0xccccccca},			/* -0.05639=f(19.3000)*/
-{62, 0,123,__LINE__, 0x3fc5e744, 0xe39a0de4, 0x4034ffff, 0xfffffffd},			/* 0.17112=f(21.0000)*/
-{62, 0,123,__LINE__, 0xbfc4a256, 0xe7770b60, 0x40386666, 0x66666663},			/* -0.16120=f(24.4000)*/
-{59, 0,123,__LINE__, 0x3f9f302d, 0x6b54eb93, 0x403a1999, 0x99999996},			/* 0.03045=f(26.1000)*/
-{62, 0,123,__LINE__, 0x3fc25cf8, 0x6ae10498, 0x403bcccc, 0xccccccc9},			/* 0.14346=f(27.8000)*/
-{64, 0,123,__LINE__, 0xbfb07640, 0x70ecf703, 0x403d7fff, 0xfffffffc},			/* -0.06430=f(29.5000)*/
-0,};
-test_j1(m)   {run_vector_1(m,j1_vec,(char *)(j1),"j1","dd");   }	
diff --git a/newlib/libm/test/j1f_vec.c b/newlib/libm/test/j1f_vec.c
deleted file mode 100644
index b09c892ef..000000000
--- a/newlib/libm/test/j1f_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type j1f_vec[] = {
-{10, 0,123,__LINE__, 0xbfdfe3f7, 0xe296ed50, 0xbff33333, 0x33333333},			/* -0.49828=f(-1.20000)*/
-{10, 0,123,__LINE__, 0xbfdfb9be, 0x81d66567, 0xbff30a3d, 0x70a3d70a},			/* -0.49571=f(-1.19000)*/
-{10, 0,123,__LINE__, 0xbfdf8eec, 0x6e9d62c5, 0xbff2e147, 0xae147ae1},			/* -0.49309=f(-1.18000)*/
-{10, 0,123,__LINE__, 0xbfdf6382, 0x7f8cac95, 0xbff2b851, 0xeb851eb8},			/* -0.49044=f(-1.17000)*/
-{10, 0,123,__LINE__, 0xbfdf3781, 0xbda5c893, 0xbff28f5c, 0x28f5c28f},			/* -0.48776=f(-1.16000)*/
-{10, 0,123,__LINE__, 0xbfdf0aea, 0x7b978b3c, 0xbff26666, 0x66666666},			/* -0.48504=f(-1.15000)*/
-{10, 0,123,__LINE__, 0xbfdeddbd, 0xdc601003, 0xbff23d70, 0xa3d70a3d},			/* -0.48228=f(-1.14000)*/
-{10, 0,123,__LINE__, 0xbfdeaffc, 0x5345ea4e, 0xbff2147a, 0xe147ae14},			/* -0.47949=f(-1.13000)*/
-{10, 0,123,__LINE__, 0xbfde81a7, 0x0cf8b2c6, 0xbff1eb85, 0x1eb851eb},			/* -0.47666=f(-1.12000)*/
-{10, 0,123,__LINE__, 0xbfde52be, 0x837f85fd, 0xbff1c28f, 0x5c28f5c2},			/* -0.47380=f(-1.11000)*/
-{10, 0,123,__LINE__, 0xbfde2343, 0xc3d9fc2f, 0xbff19999, 0x99999999},			/* -0.47090=f(-1.10000)*/
-{10, 0,123,__LINE__, 0xbfddf337, 0x95bee2f9, 0xbff170a3, 0xd70a3d70},			/* -0.46796=f(-1.09000)*/
-{10, 0,123,__LINE__, 0xbfddc29a, 0xe6cbf864, 0xbff147ae, 0x147ae147},			/* -0.46500=f(-1.08000)*/
-{10, 0,123,__LINE__, 0xbfdd916e, 0x7f852d6b, 0xbff11eb8, 0x51eb851e},			/* -0.46200=f(-1.07000)*/
-{10, 0,123,__LINE__, 0xbfdd5fb3, 0x026afa3b, 0xbff0f5c2, 0x8f5c28f5},			/* -0.45896=f(-1.06000)*/
-{10, 0,123,__LINE__, 0xbfdd2d69, 0xacfecf37, 0xbff0cccc, 0xcccccccc},			/* -0.45589=f(-1.05000)*/
-{10, 0,123,__LINE__, 0xbfdcfa93, 0x5d5e5197, 0xbff0a3d7, 0x0a3d70a3},			/* -0.45279=f(-1.04000)*/
-{10, 0,123,__LINE__, 0xbfdcc730, 0xf0437f56, 0xbff07ae1, 0x47ae147a},			/* -0.44965=f(-1.03000)*/
-{10, 0,123,__LINE__, 0xbfdc9343, 0x410cdccf, 0xbff051eb, 0x851eb851},			/* -0.44648=f(-1.02000)*/
-{10, 0,123,__LINE__, 0xbfdc5ecb, 0x4eca213c, 0xbff028f5, 0xc28f5c28},			/* -0.44328=f(-1.01000)*/
-{10, 0,123,__LINE__, 0xbfdc29c9, 0xfa51149f, 0xbfefffff, 0xfffffffe},			/* -0.44005=f(-0.01000)*/
-{10, 0,123,__LINE__, 0xbfdbf440, 0x43c73861, 0xbfefae14, 0x7ae147ac},			/* -0.43678=f(-0.99000)*/
-{10, 0,123,__LINE__, 0xbfdbbe2f, 0x19114e8f, 0xbfef5c28, 0xf5c28f5a},			/* -0.43348=f(-0.98000)*/
-{10, 0,123,__LINE__, 0xbfdb8797, 0xb66dd246, 0xbfef0a3d, 0x70a3d708},			/* -0.43015=f(-0.97000)*/
-{10, 0,123,__LINE__, 0xbfdb507a, 0x976f4d7f, 0xbfeeb851, 0xeb851eb6},			/* -0.42678=f(-0.96000)*/
-{10, 0,123,__LINE__, 0xbfdb18d9, 0x5833a31b, 0xbfee6666, 0x66666664},			/* -0.42339=f(-0.95000)*/
-{10, 0,123,__LINE__, 0xbfdae0b4, 0x7450c189, 0xbfee147a, 0xe147ae12},			/* -0.41996=f(-0.94000)*/
-{10, 0,123,__LINE__, 0xbfdaa80d, 0x55cab504, 0xbfedc28f, 0x5c28f5c0},			/* -0.41650=f(-0.93000)*/
-{10, 0,123,__LINE__, 0xbfda6ee4, 0xd6fe4429, 0xbfed70a3, 0xd70a3d6e},			/* -0.41301=f(-0.92000)*/
-{10, 0,123,__LINE__, 0xbfda353b, 0xf0bbb5c0, 0xbfed1eb8, 0x51eb851c},			/* -0.40949=f(-0.91000)*/
-{10, 0,123,__LINE__, 0xbfd9fb13, 0xd6540a1e, 0xbfeccccc, 0xccccccca},			/* -0.40594=f(-0.90000)*/
-{10, 0,123,__LINE__, 0xbfd9c06d, 0x87665c7f, 0xbfec7ae1, 0x47ae1478},			/* -0.40236=f(-0.89000)*/
-{10, 0,123,__LINE__, 0xbfd9854a, 0x1ea094f0, 0xbfec28f5, 0xc28f5c26},			/* -0.39876=f(-0.88000)*/
-{10, 0,123,__LINE__, 0xbfd949aa, 0xbd8eb7ef, 0xbfebd70a, 0x3d70a3d4},			/* -0.39512=f(-0.87000)*/
-{10, 0,123,__LINE__, 0xbfd90d90, 0x4d502695, 0xbfeb851e, 0xb851eb82},			/* -0.39145=f(-0.86000)*/
-{10, 0,123,__LINE__, 0xbfd8d0fc, 0x3fc251ef, 0xbfeb3333, 0x33333330},			/* -0.38775=f(-0.85000)*/
-{10, 0,123,__LINE__, 0xbfd893ef, 0x361a3f6f, 0xbfeae147, 0xae147ade},			/* -0.38402=f(-0.84000)*/
-{10, 0,123,__LINE__, 0xbfd8566a, 0xdd50c11e, 0xbfea8f5c, 0x28f5c28c},			/* -0.38027=f(-0.83000)*/
-{10, 0,123,__LINE__, 0xbfd81870, 0x103415fd, 0xbfea3d70, 0xa3d70a3a},			/* -0.37649=f(-0.82000)*/
-{10, 0,123,__LINE__, 0xbfd7d9ff, 0xe0889116, 0xbfe9eb85, 0x1eb851e8},			/* -0.37268=f(-0.81000)*/
-{10, 0,123,__LINE__, 0xbfd79b1b, 0xaeb357c7, 0xbfe99999, 0x99999996},			/* -0.36884=f(-0.80000)*/
-{10, 0,123,__LINE__, 0xbfd75bc4, 0x7698f819, 0xbfe947ae, 0x147ae144},			/* -0.36497=f(-0.79000)*/
-{10, 0,123,__LINE__, 0xbfd71bfb, 0x6857591c, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.36108=f(-0.78000)*/
-{10, 0,123,__LINE__, 0xbfd6dbc1, 0xd7d17caa, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.35716=f(-0.77000)*/
-{10, 0,123,__LINE__, 0xbfd69b18, 0xf664e9f7, 0xbfe851eb, 0x851eb84e},			/* -0.35321=f(-0.76000)*/
-{10, 0,123,__LINE__, 0xbfd65a01, 0xe3170c9e, 0xbfe7ffff, 0xfffffffc},			/* -0.34924=f(-0.75000)*/
-{10, 0,123,__LINE__, 0xbfd6187d, 0xc1a32633, 0xbfe7ae14, 0x7ae147aa},			/* -0.34524=f(-0.74000)*/
-{10, 0,123,__LINE__, 0xbfd5d68d, 0xe4bdf679, 0xbfe75c28, 0xf5c28f58},			/* -0.34122=f(-0.73000)*/
-{10, 0,123,__LINE__, 0xbfd59433, 0x8b959fc1, 0xbfe70a3d, 0x70a3d706},			/* -0.33717=f(-0.72000)*/
-{10, 0,123,__LINE__, 0xbfd5516f, 0xd4a6218e, 0xbfe6b851, 0xeb851eb4},			/* -0.33309=f(-0.71000)*/
-{10, 0,123,__LINE__, 0xbfd50e44, 0x29867955, 0xbfe66666, 0x66666662},			/* -0.32899=f(-0.70000)*/
-{10, 0,123,__LINE__, 0xbfd4cab1, 0xc530bb3b, 0xbfe6147a, 0xe147ae10},			/* -0.32487=f(-0.69000)*/
-{10, 0,123,__LINE__, 0xbfd486b9, 0xc1d8b3f1, 0xbfe5c28f, 0x5c28f5be},			/* -0.32072=f(-0.68000)*/
-{10, 0,123,__LINE__, 0xbfd4425d, 0xa6a458f0, 0xbfe570a3, 0xd70a3d6c},			/* -0.31655=f(-0.67000)*/
-{10, 0,123,__LINE__, 0xbfd3fd9e, 0x92e26ecb, 0xbfe51eb8, 0x51eb851a},			/* -0.31235=f(-0.66000)*/
-{10, 0,123,__LINE__, 0xbfd3b87d, 0xb24699dd, 0xbfe4cccc, 0xccccccc8},			/* -0.30813=f(-0.65000)*/
-{10, 0,123,__LINE__, 0xbfd372fc, 0x8e83921a, 0xbfe47ae1, 0x47ae1476},			/* -0.30389=f(-0.64000)*/
-{10, 0,123,__LINE__, 0xbfd32d1c, 0x80f088ac, 0xbfe428f5, 0xc28f5c24},			/* -0.29962=f(-0.63000)*/
-{10, 0,123,__LINE__, 0xbfd2e6de, 0xb0188656, 0xbfe3d70a, 0x3d70a3d2},			/* -0.29534=f(-0.62000)*/
-{10, 0,123,__LINE__, 0xbfd2a044, 0x6e5bcdb3, 0xbfe3851e, 0xb851eb80},			/* -0.29103=f(-0.61000)*/
-{10, 0,123,__LINE__, 0xbfd2594f, 0x36b84437, 0xbfe33333, 0x3333332e},			/* -0.28670=f(-0.60000)*/
-{10, 0,123,__LINE__, 0xbfd21200, 0x0601539f, 0xbfe2e147, 0xae147adc},			/* -0.28234=f(-0.59000)*/
-{10, 0,123,__LINE__, 0xbfd1ca58, 0xa8b2d7da, 0xbfe28f5c, 0x28f5c28a},			/* -0.27797=f(-0.58000)*/
-{10, 0,123,__LINE__, 0xbfd1825a, 0x21de2d82, 0xbfe23d70, 0xa3d70a38},			/* -0.27358=f(-0.57000)*/
-{12, 0,123,__LINE__, 0xbfd13a06, 0x0331c1d0, 0xbfe1eb85, 0x1eb851e6},			/* -0.26916=f(-0.56000)*/
-{12, 0,123,__LINE__, 0xbfd0f15d, 0xb8bcd619, 0xbfe19999, 0x99999994},			/* -0.26473=f(-0.55000)*/
-{12, 0,123,__LINE__, 0xbfd0a862, 0x5987768b, 0xbfe147ae, 0x147ae142},			/* -0.26027=f(-0.54000)*/
-{12, 0,123,__LINE__, 0xbfd05f15, 0x6b52faaa, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.25580=f(-0.53000)*/
-{12, 0,123,__LINE__, 0xbfd01578, 0x6a7550c2, 0xbfe0a3d7, 0x0a3d709e},			/* -0.25131=f(-0.52000)*/
-{11, 0,123,__LINE__, 0xbfcf9719, 0x5566e736, 0xbfe051eb, 0x851eb84c},			/* -0.24679=f(-0.51000)*/
-{11, 0,123,__LINE__, 0xbfcf02a7, 0x1dfd7df0, 0xbfdfffff, 0xfffffff4},			/* -0.24226=f(-0.50000)*/
-{11, 0,123,__LINE__, 0xbfce6d9c, 0xfb02b29e, 0xbfdf5c28, 0xf5c28f50},			/* -0.23772=f(-0.49000)*/
-{11, 0,123,__LINE__, 0xbfcdd7fd, 0xd74f56e4, 0xbfdeb851, 0xeb851eac},			/* -0.23315=f(-0.48000)*/
-{11, 0,123,__LINE__, 0xbfcd41cc, 0x64848ecb, 0xbfde147a, 0xe147ae08},			/* -0.22857=f(-0.47000)*/
-{11, 0,123,__LINE__, 0xbfccab0b, 0xcf75d2e9, 0xbfdd70a3, 0xd70a3d64},			/* -0.22396=f(-0.46000)*/
-{11, 0,123,__LINE__, 0xbfcc13be, 0x579febfe, 0xbfdccccc, 0xccccccc0},			/* -0.21935=f(-0.45000)*/
-{11, 0,123,__LINE__, 0xbfcb7be7, 0xa577284f, 0xbfdc28f5, 0xc28f5c1c},			/* -0.21471=f(-0.44000)*/
-{11, 0,123,__LINE__, 0xbfcae38a, 0x1d66f978, 0xbfdb851e, 0xb851eb78},			/* -0.21006=f(-0.43000)*/
-{11, 0,123,__LINE__, 0xbfca4aa8, 0x9afa7a23, 0xbfdae147, 0xae147ad4},			/* -0.20540=f(-0.42000)*/
-{11, 0,123,__LINE__, 0xbfc9b146, 0x584989fc, 0xbfda3d70, 0xa3d70a30},			/* -0.20072=f(-0.41000)*/
-{11, 0,123,__LINE__, 0xbfc91766, 0x184cbdbd, 0xbfd99999, 0x9999998c},			/* -0.19602=f(-0.40000)*/
-{11, 0,123,__LINE__, 0xbfc87d0a, 0xb9ee782a, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.19131=f(-0.39000)*/
-{11, 0,123,__LINE__, 0xbfc7e237, 0x4b08c504, 0xbfd851eb, 0x851eb844},			/* -0.18659=f(-0.38000)*/
-{11, 0,123,__LINE__, 0xbfc746ee, 0xc745478b, 0xbfd7ae14, 0x7ae147a0},			/* -0.18185=f(-0.37000)*/
-{11, 0,123,__LINE__, 0xbfc6ab34, 0x1a585ddb, 0xbfd70a3d, 0x70a3d6fc},			/* -0.17709=f(-0.36000)*/
-{11, 0,123,__LINE__, 0xbfc60f09, 0xfc6ec0fb, 0xbfd66666, 0x66666658},			/* -0.17233=f(-0.35000)*/
-{11, 0,123,__LINE__, 0xbfc57273, 0xcc336581, 0xbfd5c28f, 0x5c28f5b4},			/* -0.16755=f(-0.34000)*/
-{11, 0,123,__LINE__, 0xbfc4d574, 0x5cf46ce5, 0xbfd51eb8, 0x51eb8510},			/* -0.16276=f(-0.33000)*/
-{11, 0,123,__LINE__, 0xbfc4380e, 0x998b977a, 0xbfd47ae1, 0x47ae146c},			/* -0.15796=f(-0.32000)*/
-{11, 0,123,__LINE__, 0xbfc39a45, 0x90886d28, 0xbfd3d70a, 0x3d70a3c8},			/* -0.15314=f(-0.31000)*/
-{11, 0,123,__LINE__, 0xbfc2fc1c, 0x6de17283, 0xbfd33333, 0x33333324},			/* -0.14831=f(-0.30000)*/
-{11, 0,123,__LINE__, 0xbfc25d95, 0xf8c62a8b, 0xbfd28f5c, 0x28f5c280},			/* -0.14348=f(-0.29000)*/
-{12, 0,123,__LINE__, 0xbfc1beb5, 0x6ef6bae5, 0xbfd1eb85, 0x1eb851dc},			/* -0.13863=f(-0.28000)*/
-{12, 0,123,__LINE__, 0xbfc11f7d, 0xd53b677d, 0xbfd147ae, 0x147ae138},			/* -0.13377=f(-0.27000)*/
-{12, 0,123,__LINE__, 0xbfc07ff2, 0x0cb5341e, 0xbfd0a3d7, 0x0a3d7094},			/* -0.12890=f(-0.26000)*/
-{ 9, 0,123,__LINE__, 0xbfbfc02a, 0xb10dd680, 0xbfcfffff, 0xffffffe0},			/* -0.12402=f(-0.25000)*/
-{ 9, 0,123,__LINE__, 0xbfbe7fd5, 0x1f9e49e2, 0xbfceb851, 0xeb851e98},			/* -0.11913=f(-0.24000)*/
-{ 9, 0,123,__LINE__, 0xbfbd3ee9, 0xf3d5623e, 0xbfcd70a3, 0xd70a3d50},			/* -0.11424=f(-0.23000)*/
-{ 9, 0,123,__LINE__, 0xbfbbfd6e, 0xff977cf7, 0xbfcc28f5, 0xc28f5c08},			/* -0.10933=f(-0.22000)*/
-{ 9, 0,123,__LINE__, 0xbfbabb6a, 0x95bc98de, 0xbfcae147, 0xae147ac0},			/* -0.10442=f(-0.21000)*/
-{ 9, 0,123,__LINE__, 0xbfb978e2, 0xefb0076f, 0xbfc99999, 0x99999978},			/* -0.09950=f(-0.20000)*/
-{ 9, 0,123,__LINE__, 0xbfb835de, 0x3733e9ed, 0xbfc851eb, 0x851eb830},			/* -0.09457=f(-0.19000)*/
-{ 9, 0,123,__LINE__, 0xbfb6f262, 0x684427d1, 0xbfc70a3d, 0x70a3d6e8},			/* -0.08963=f(-0.18000)*/
-{ 9, 0,123,__LINE__, 0xbfb5ae75, 0xe06f7b00, 0xbfc5c28f, 0x5c28f5a0},			/* -0.08469=f(-0.17000)*/
-{ 9, 0,123,__LINE__, 0xbfb46a1e, 0xcc348f0a, 0xbfc47ae1, 0x47ae1458},			/* -0.07974=f(-0.16000)*/
-{ 9, 0,123,__LINE__, 0xbfb32563, 0x9d6575f8, 0xbfc33333, 0x33333310},			/* -0.07478=f(-0.15000)*/
-{12, 0,123,__LINE__, 0xbfb1e04a, 0x2afa9641, 0xbfc1eb85, 0x1eb851c8},			/* -0.06982=f(-0.14000)*/
-{12, 0,123,__LINE__, 0xbfb09ad8, 0xe9211c1f, 0xbfc0a3d7, 0x0a3d7080},			/* -0.06486=f(-0.13000)*/
-{11, 0,123,__LINE__, 0xbfaeaa2c, 0x30546b47, 0xbfbeb851, 0xeb851e71},			/* -0.05989=f(-0.12000)*/
-{11, 0,123,__LINE__, 0xbfac1e0f, 0xd8be659f, 0xbfbc28f5, 0xc28f5be2},			/* -0.05491=f(-0.11000)*/
-{11, 0,123,__LINE__, 0xbfa99169, 0x54e4ac09, 0xbfb99999, 0x99999953},			/* -0.04993=f(-0.00100)*/
-{11, 0,123,__LINE__, 0xbfa70445, 0x2ed31f92, 0xbfb70a3d, 0x70a3d6c4},			/* -0.04495=f(-0.09000)*/
-{11, 0,123,__LINE__, 0xbfa476af, 0xbc7852a8, 0xbfb47ae1, 0x47ae1435},			/* -0.03996=f(-0.08000)*/
-{12, 0,123,__LINE__, 0xbfa1e8b5, 0xf541e63f, 0xbfb1eb85, 0x1eb851a6},			/* -0.03497=f(-0.07000)*/
-{10, 0,123,__LINE__, 0xbf9eb4c7, 0xfcf247c3, 0xbfaeb851, 0xeb851e2d},			/* -0.02998=f(-0.06000)*/
-{10, 0,123,__LINE__, 0xbf99978d, 0x75f51f61, 0xbfa99999, 0x9999990e},			/* -0.02499=f(-0.05000)*/
-{10, 0,123,__LINE__, 0xbf9479d4, 0xcc2710b7, 0xbfa47ae1, 0x47ae13ef},			/* -0.01999=f(-0.04000)*/
-{11, 0,123,__LINE__, 0xbf8eb76f, 0x6d7096c3, 0xbf9eb851, 0xeb851da0},			/* -0.01499=f(-0.03000)*/
-{11, 0,123,__LINE__, 0xbf847a9e, 0x22d3fb34, 0xbf947ae1, 0x47ae1362},			/* -0.00999=f(-0.02000)*/
-{ 8, 0,123,__LINE__, 0xbf747ad0, 0x831810f7, 0xbf847ae1, 0x47ae1249},			/* -0.00499=f(-0.00010)*/
-{12, 0,123,__LINE__, 0x3cc19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 4.87457e-16=f(9.74915e-16)*/
-{ 8, 0,123,__LINE__, 0x3f747ad0, 0x831810f7, 0x3f847ae1, 0x47ae16ad},			/* 0.00499=f(0.01000)*/
-{11, 0,123,__LINE__, 0x3f847a9e, 0x22d3fb34, 0x3f947ae1, 0x47ae1594},			/* 0.00999=f(0.02000)*/
-{11, 0,123,__LINE__, 0x3f8eb76f, 0x6d7096c3, 0x3f9eb851, 0xeb851fd2},			/* 0.01499=f(0.03000)*/
-{10, 0,123,__LINE__, 0x3f9479d4, 0xcc2710b7, 0x3fa47ae1, 0x47ae1508},			/* 0.01999=f(0.04000)*/
-{10, 0,123,__LINE__, 0x3f99978d, 0x75f51f61, 0x3fa99999, 0x99999a27},			/* 0.02499=f(0.05000)*/
-{10, 0,123,__LINE__, 0x3f9eb4c7, 0xfcf247c3, 0x3faeb851, 0xeb851f46},			/* 0.02998=f(0.06000)*/
-{12, 0,123,__LINE__, 0x3fa1e8b5, 0xf541e63f, 0x3fb1eb85, 0x1eb85232},			/* 0.03497=f(0.07000)*/
-{11, 0,123,__LINE__, 0x3fa476af, 0xbc7852a8, 0x3fb47ae1, 0x47ae14c1},			/* 0.03996=f(0.08000)*/
-{11, 0,123,__LINE__, 0x3fa70445, 0x2ed31f92, 0x3fb70a3d, 0x70a3d750},			/* 0.04495=f(0.09000)*/
-{11, 0,123,__LINE__, 0x3fa99169, 0x54e4ac09, 0x3fb99999, 0x999999df},			/* 0.04993=f(0.10000)*/
-{11, 0,123,__LINE__, 0x3fac1e0f, 0xd8be659f, 0x3fbc28f5, 0xc28f5c6e},			/* 0.05491=f(0.11000)*/
-{11, 0,123,__LINE__, 0x3faeaa2c, 0x30546b47, 0x3fbeb851, 0xeb851efd},			/* 0.05989=f(0.12000)*/
-{12, 0,123,__LINE__, 0x3fb09ad8, 0xe9211c1f, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.06486=f(0.13000)*/
-{12, 0,123,__LINE__, 0x3fb1e04a, 0x2afa9641, 0x3fc1eb85, 0x1eb8520e},			/* 0.06982=f(0.14000)*/
-{ 9, 0,123,__LINE__, 0x3fb32563, 0x9d6575f8, 0x3fc33333, 0x33333356},			/* 0.07478=f(0.15000)*/
-{ 9, 0,123,__LINE__, 0x3fb46a1e, 0xcc348f0a, 0x3fc47ae1, 0x47ae149e},			/* 0.07974=f(0.16000)*/
-{ 9, 0,123,__LINE__, 0x3fb5ae75, 0xe06f7b00, 0x3fc5c28f, 0x5c28f5e6},			/* 0.08469=f(0.17000)*/
-{ 9, 0,123,__LINE__, 0x3fb6f262, 0x684427d1, 0x3fc70a3d, 0x70a3d72e},			/* 0.08963=f(0.18000)*/
-{ 9, 0,123,__LINE__, 0x3fb835de, 0x3733e9ed, 0x3fc851eb, 0x851eb876},			/* 0.09457=f(0.19000)*/
-{ 9, 0,123,__LINE__, 0x3fb978e2, 0xefb0076f, 0x3fc99999, 0x999999be},			/* 0.09950=f(0.20000)*/
-{ 9, 0,123,__LINE__, 0x3fbabb6a, 0x95bc98de, 0x3fcae147, 0xae147b06},			/* 0.10442=f(0.21000)*/
-{ 9, 0,123,__LINE__, 0x3fbbfd6e, 0xff977cf7, 0x3fcc28f5, 0xc28f5c4e},			/* 0.10933=f(0.22000)*/
-{ 9, 0,123,__LINE__, 0x3fbd3ee9, 0xf3d5623e, 0x3fcd70a3, 0xd70a3d96},			/* 0.11424=f(0.23000)*/
-{ 9, 0,123,__LINE__, 0x3fbe7fd5, 0x1f9e49e2, 0x3fceb851, 0xeb851ede},			/* 0.11913=f(0.24000)*/
-{ 9, 0,123,__LINE__, 0x3fbfc02a, 0xb10dd680, 0x3fd00000, 0x00000013},			/* 0.12402=f(0.25000)*/
-{12, 0,123,__LINE__, 0x3fc07ff2, 0x0cb5341e, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.12890=f(0.26000)*/
-{12, 0,123,__LINE__, 0x3fc11f7d, 0xd53b677d, 0x3fd147ae, 0x147ae15b},			/* 0.13377=f(0.27000)*/
-{12, 0,123,__LINE__, 0x3fc1beb5, 0x6ef6bae5, 0x3fd1eb85, 0x1eb851ff},			/* 0.13863=f(0.28000)*/
-{11, 0,123,__LINE__, 0x3fc25d95, 0xf8c62a8b, 0x3fd28f5c, 0x28f5c2a3},			/* 0.14348=f(0.29000)*/
-{11, 0,123,__LINE__, 0x3fc2fc1c, 0x6de17283, 0x3fd33333, 0x33333347},			/* 0.14831=f(0.30000)*/
-{11, 0,123,__LINE__, 0x3fc39a45, 0x90886d28, 0x3fd3d70a, 0x3d70a3eb},			/* 0.15314=f(0.31000)*/
-{11, 0,123,__LINE__, 0x3fc4380e, 0x998b977a, 0x3fd47ae1, 0x47ae148f},			/* 0.15796=f(0.32000)*/
-{11, 0,123,__LINE__, 0x3fc4d574, 0x5cf46ce5, 0x3fd51eb8, 0x51eb8533},			/* 0.16276=f(0.33000)*/
-{11, 0,123,__LINE__, 0x3fc57273, 0xcc336581, 0x3fd5c28f, 0x5c28f5d7},			/* 0.16755=f(0.34000)*/
-{11, 0,123,__LINE__, 0x3fc60f09, 0xfc6ec0fb, 0x3fd66666, 0x6666667b},			/* 0.17233=f(0.35000)*/
-{11, 0,123,__LINE__, 0x3fc6ab34, 0x1a585ddb, 0x3fd70a3d, 0x70a3d71f},			/* 0.17709=f(0.36000)*/
-{11, 0,123,__LINE__, 0x3fc746ee, 0xc745478b, 0x3fd7ae14, 0x7ae147c3},			/* 0.18185=f(0.37000)*/
-{11, 0,123,__LINE__, 0x3fc7e237, 0x4b08c504, 0x3fd851eb, 0x851eb867},			/* 0.18659=f(0.38000)*/
-{11, 0,123,__LINE__, 0x3fc87d0a, 0xb9ee782a, 0x3fd8f5c2, 0x8f5c290b},			/* 0.19131=f(0.39000)*/
-{11, 0,123,__LINE__, 0x3fc91766, 0x184cbdbd, 0x3fd99999, 0x999999af},			/* 0.19602=f(0.40000)*/
-{11, 0,123,__LINE__, 0x3fc9b146, 0x584989fc, 0x3fda3d70, 0xa3d70a53},			/* 0.20072=f(0.41000)*/
-{11, 0,123,__LINE__, 0x3fca4aa8, 0x9afa7a23, 0x3fdae147, 0xae147af7},			/* 0.20540=f(0.42000)*/
-{11, 0,123,__LINE__, 0x3fcae38a, 0x1d66f978, 0x3fdb851e, 0xb851eb9b},			/* 0.21006=f(0.43000)*/
-{11, 0,123,__LINE__, 0x3fcb7be7, 0xa577284f, 0x3fdc28f5, 0xc28f5c3f},			/* 0.21471=f(0.44000)*/
-{11, 0,123,__LINE__, 0x3fcc13be, 0x579febfe, 0x3fdccccc, 0xcccccce3},			/* 0.21935=f(0.45000)*/
-{11, 0,123,__LINE__, 0x3fccab0b, 0xcf75d2e9, 0x3fdd70a3, 0xd70a3d87},			/* 0.22396=f(0.46000)*/
-{11, 0,123,__LINE__, 0x3fcd41cc, 0x64848ecb, 0x3fde147a, 0xe147ae2b},			/* 0.22857=f(0.47000)*/
-{11, 0,123,__LINE__, 0x3fcdd7fd, 0xd74f56e4, 0x3fdeb851, 0xeb851ecf},			/* 0.23315=f(0.48000)*/
-{11, 0,123,__LINE__, 0x3fce6d9c, 0xfb02b29e, 0x3fdf5c28, 0xf5c28f73},			/* 0.23772=f(0.49000)*/
-{11, 0,123,__LINE__, 0x3fcf02a7, 0x1dfd7df0, 0x3fe00000, 0x0000000b},			/* 0.24226=f(0.50000)*/
-{11, 0,123,__LINE__, 0x3fcf9719, 0x5566e736, 0x3fe051eb, 0x851eb85d},			/* 0.24679=f(0.51000)*/
-{12, 0,123,__LINE__, 0x3fd01578, 0x6a7550c2, 0x3fe0a3d7, 0x0a3d70af},			/* 0.25131=f(0.52000)*/
-{12, 0,123,__LINE__, 0x3fd05f15, 0x6b52faaa, 0x3fe0f5c2, 0x8f5c2901},			/* 0.25580=f(0.53000)*/
-{12, 0,123,__LINE__, 0x3fd0a862, 0x5987768b, 0x3fe147ae, 0x147ae153},			/* 0.26027=f(0.54000)*/
-{12, 0,123,__LINE__, 0x3fd0f15d, 0xb8bcd619, 0x3fe19999, 0x999999a5},			/* 0.26473=f(0.55000)*/
-{12, 0,123,__LINE__, 0x3fd13a06, 0x0331c1d0, 0x3fe1eb85, 0x1eb851f7},			/* 0.26916=f(0.56000)*/
-{10, 0,123,__LINE__, 0x3fd1825a, 0x21de2d82, 0x3fe23d70, 0xa3d70a49},			/* 0.27358=f(0.57000)*/
-{10, 0,123,__LINE__, 0x3fd1ca58, 0xa8b2d7da, 0x3fe28f5c, 0x28f5c29b},			/* 0.27797=f(0.58000)*/
-{10, 0,123,__LINE__, 0x3fd21200, 0x0601539f, 0x3fe2e147, 0xae147aed},			/* 0.28234=f(0.59000)*/
-{10, 0,123,__LINE__, 0x3fd2594f, 0x36b84437, 0x3fe33333, 0x3333333f},			/* 0.28670=f(0.60000)*/
-{10, 0,123,__LINE__, 0x3fd2a044, 0x6e5bcdb3, 0x3fe3851e, 0xb851eb91},			/* 0.29103=f(0.61000)*/
-{10, 0,123,__LINE__, 0x3fd2e6de, 0xb0188656, 0x3fe3d70a, 0x3d70a3e3},			/* 0.29534=f(0.62000)*/
-{10, 0,123,__LINE__, 0x3fd32d1c, 0x80f088ac, 0x3fe428f5, 0xc28f5c35},			/* 0.29962=f(0.63000)*/
-{10, 0,123,__LINE__, 0x3fd372fc, 0x8e83921a, 0x3fe47ae1, 0x47ae1487},			/* 0.30389=f(0.64000)*/
-{10, 0,123,__LINE__, 0x3fd3b87d, 0xb24699dd, 0x3fe4cccc, 0xccccccd9},			/* 0.30813=f(0.65000)*/
-{10, 0,123,__LINE__, 0x3fd3fd9e, 0x92e26ecb, 0x3fe51eb8, 0x51eb852b},			/* 0.31235=f(0.66000)*/
-{10, 0,123,__LINE__, 0x3fd4425d, 0xa6a458f0, 0x3fe570a3, 0xd70a3d7d},			/* 0.31655=f(0.67000)*/
-{10, 0,123,__LINE__, 0x3fd486b9, 0xc1d8b3f1, 0x3fe5c28f, 0x5c28f5cf},			/* 0.32072=f(0.68000)*/
-{10, 0,123,__LINE__, 0x3fd4cab1, 0xc530bb3b, 0x3fe6147a, 0xe147ae21},			/* 0.32487=f(0.69000)*/
-{10, 0,123,__LINE__, 0x3fd50e44, 0x29867955, 0x3fe66666, 0x66666673},			/* 0.32899=f(0.70000)*/
-{10, 0,123,__LINE__, 0x3fd5516f, 0xd4a6218e, 0x3fe6b851, 0xeb851ec5},			/* 0.33309=f(0.71000)*/
-{10, 0,123,__LINE__, 0x3fd59433, 0x8b959fc1, 0x3fe70a3d, 0x70a3d717},			/* 0.33717=f(0.72000)*/
-{10, 0,123,__LINE__, 0x3fd5d68d, 0xe4bdf679, 0x3fe75c28, 0xf5c28f69},			/* 0.34122=f(0.73000)*/
-{10, 0,123,__LINE__, 0x3fd6187d, 0xc1a32633, 0x3fe7ae14, 0x7ae147bb},			/* 0.34524=f(0.74000)*/
-{10, 0,123,__LINE__, 0x3fd65a01, 0xe3170c9e, 0x3fe80000, 0x0000000d},			/* 0.34924=f(0.75000)*/
-{10, 0,123,__LINE__, 0x3fd69b18, 0xf664e9f7, 0x3fe851eb, 0x851eb85f},			/* 0.35321=f(0.76000)*/
-{10, 0,123,__LINE__, 0x3fd6dbc1, 0xd7d17caa, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.35716=f(0.77000)*/
-{10, 0,123,__LINE__, 0x3fd71bfb, 0x6857591c, 0x3fe8f5c2, 0x8f5c2903},			/* 0.36108=f(0.78000)*/
-{10, 0,123,__LINE__, 0x3fd75bc4, 0x7698f819, 0x3fe947ae, 0x147ae155},			/* 0.36497=f(0.79000)*/
-{10, 0,123,__LINE__, 0x3fd79b1b, 0xaeb357c7, 0x3fe99999, 0x999999a7},			/* 0.36884=f(0.80000)*/
-{10, 0,123,__LINE__, 0x3fd7d9ff, 0xe0889116, 0x3fe9eb85, 0x1eb851f9},			/* 0.37268=f(0.81000)*/
-{10, 0,123,__LINE__, 0x3fd81870, 0x103415fd, 0x3fea3d70, 0xa3d70a4b},			/* 0.37649=f(0.82000)*/
-{10, 0,123,__LINE__, 0x3fd8566a, 0xdd50c11e, 0x3fea8f5c, 0x28f5c29d},			/* 0.38027=f(0.83000)*/
-{10, 0,123,__LINE__, 0x3fd893ef, 0x361a3f6f, 0x3feae147, 0xae147aef},			/* 0.38402=f(0.84000)*/
-{10, 0,123,__LINE__, 0x3fd8d0fc, 0x3fc251ef, 0x3feb3333, 0x33333341},			/* 0.38775=f(0.85000)*/
-{10, 0,123,__LINE__, 0x3fd90d90, 0x4d502695, 0x3feb851e, 0xb851eb93},			/* 0.39145=f(0.86000)*/
-{10, 0,123,__LINE__, 0x3fd949aa, 0xbd8eb7ef, 0x3febd70a, 0x3d70a3e5},			/* 0.39512=f(0.87000)*/
-{10, 0,123,__LINE__, 0x3fd9854a, 0x1ea094f0, 0x3fec28f5, 0xc28f5c37},			/* 0.39876=f(0.88000)*/
-{10, 0,123,__LINE__, 0x3fd9c06d, 0x87665c7f, 0x3fec7ae1, 0x47ae1489},			/* 0.40236=f(0.89000)*/
-{10, 0,123,__LINE__, 0x3fd9fb13, 0xd6540a1e, 0x3feccccc, 0xccccccdb},			/* 0.40594=f(0.90000)*/
-{10, 0,123,__LINE__, 0x3fda353b, 0xf0bbb5c0, 0x3fed1eb8, 0x51eb852d},			/* 0.40949=f(0.91000)*/
-{10, 0,123,__LINE__, 0x3fda6ee4, 0xd6fe4429, 0x3fed70a3, 0xd70a3d7f},			/* 0.41301=f(0.92000)*/
-{10, 0,123,__LINE__, 0x3fdaa80d, 0x55cab504, 0x3fedc28f, 0x5c28f5d1},			/* 0.41650=f(0.93000)*/
-{10, 0,123,__LINE__, 0x3fdae0b4, 0x7450c189, 0x3fee147a, 0xe147ae23},			/* 0.41996=f(0.94000)*/
-{10, 0,123,__LINE__, 0x3fdb18d9, 0x5833a31b, 0x3fee6666, 0x66666675},			/* 0.42339=f(0.95000)*/
-{10, 0,123,__LINE__, 0x3fdb507a, 0x976f4d7f, 0x3feeb851, 0xeb851ec7},			/* 0.42678=f(0.96000)*/
-{10, 0,123,__LINE__, 0x3fdb8797, 0xb66dd246, 0x3fef0a3d, 0x70a3d719},			/* 0.43015=f(0.97000)*/
-{10, 0,123,__LINE__, 0x3fdbbe2f, 0x19114e8f, 0x3fef5c28, 0xf5c28f6b},			/* 0.43348=f(0.98000)*/
-{10, 0,123,__LINE__, 0x3fdbf440, 0x43c73861, 0x3fefae14, 0x7ae147bd},			/* 0.43678=f(0.99000)*/
-{10, 0,123,__LINE__, 0x3fdc29c9, 0xfa51149f, 0x3ff00000, 0x00000007},			/* 0.44005=f(1.00000)*/
-{10, 0,123,__LINE__, 0x3fdc5ecb, 0x4eca213c, 0x3ff028f5, 0xc28f5c30},			/* 0.44328=f(1.01000)*/
-{10, 0,123,__LINE__, 0x3fdc9343, 0x410cdccf, 0x3ff051eb, 0x851eb859},			/* 0.44648=f(1.02000)*/
-{10, 0,123,__LINE__, 0x3fdcc730, 0xf0437f56, 0x3ff07ae1, 0x47ae1482},			/* 0.44965=f(1.03000)*/
-{10, 0,123,__LINE__, 0x3fdcfa93, 0x5d5e5197, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.45279=f(1.04000)*/
-{10, 0,123,__LINE__, 0x3fdd2d69, 0xacfecf37, 0x3ff0cccc, 0xccccccd4},			/* 0.45589=f(1.05000)*/
-{10, 0,123,__LINE__, 0x3fdd5fb3, 0x026afa3b, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.45896=f(1.06000)*/
-{10, 0,123,__LINE__, 0x3fdd916e, 0x7f852d6b, 0x3ff11eb8, 0x51eb8526},			/* 0.46200=f(1.07000)*/
-{10, 0,123,__LINE__, 0x3fddc29a, 0xe6cbf864, 0x3ff147ae, 0x147ae14f},			/* 0.46500=f(1.08000)*/
-{10, 0,123,__LINE__, 0x3fddf337, 0x95bee2f9, 0x3ff170a3, 0xd70a3d78},			/* 0.46796=f(1.09000)*/
-{10, 0,123,__LINE__, 0x3fde2343, 0xc3d9fc2f, 0x3ff19999, 0x999999a1},			/* 0.47090=f(1.10000)*/
-{10, 0,123,__LINE__, 0x3fde52be, 0x837f85fd, 0x3ff1c28f, 0x5c28f5ca},			/* 0.47380=f(1.11000)*/
-{10, 0,123,__LINE__, 0x3fde81a7, 0x0cf8b2c6, 0x3ff1eb85, 0x1eb851f3},			/* 0.47666=f(1.12000)*/
-{10, 0,123,__LINE__, 0x3fdeaffc, 0x5345ea4e, 0x3ff2147a, 0xe147ae1c},			/* 0.47949=f(1.13000)*/
-{10, 0,123,__LINE__, 0x3fdeddbd, 0xdc601003, 0x3ff23d70, 0xa3d70a45},			/* 0.48228=f(1.14000)*/
-{10, 0,123,__LINE__, 0x3fdf0aea, 0x7b978b3c, 0x3ff26666, 0x6666666e},			/* 0.48504=f(1.15000)*/
-{10, 0,123,__LINE__, 0x3fdf3781, 0xbda5c893, 0x3ff28f5c, 0x28f5c297},			/* 0.48776=f(1.16000)*/
-{10, 0,123,__LINE__, 0x3fdf6382, 0x7f8cac95, 0x3ff2b851, 0xeb851ec0},			/* 0.49044=f(1.17000)*/
-{10, 0,123,__LINE__, 0x3fdf8eec, 0x6e9d62c5, 0x3ff2e147, 0xae147ae9},			/* 0.49309=f(1.18000)*/
-{10, 0,123,__LINE__, 0x3fdfb9be, 0x81d66567, 0x3ff30a3d, 0x70a3d712},			/* 0.49571=f(1.19000)*/
-{ 0, 0,123,__LINE__, 0x3fcb2f55, 0xf83a1d0c, 0xc01921fb, 0x54442d18},			/* 0.21238=f(-6.28318)*/
-{ 0, 0,123,__LINE__, 0x3fd206ae, 0xb931d7e7, 0xc012d97c, 0x7f3321d2},			/* 0.28165=f(-4.71238)*/
-{ 0, 0,123,__LINE__, 0xbfd23723, 0x18762bba, 0xc00921fb, 0x54442d18},			/* -0.28461=f(-3.14159)*/
-{11, 0,123,__LINE__, 0xbfe2236c, 0x3dfb70a7, 0xbff921fb, 0x54442d18},			/* -0.56682=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{11, 0,123,__LINE__, 0x3fe2236c, 0x3dfb70a7, 0x3ff921fb, 0x54442d18},			/* 0.56682=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0x3fd23723, 0x18762bba, 0x400921fb, 0x54442d18},			/* 0.28461=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0xbfd206ae, 0xb931d7e7, 0x4012d97c, 0x7f3321d2},			/* -0.28165=f(4.71238)*/
-{ 9, 0,123,__LINE__, 0x3fbe6679, 0xa0000000, 0xc03e0000, 0x00000000},			/* 0.11875=f(-30.0000)*/
-{ 9, 0,123,__LINE__, 0xbfba145c, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -0.10187=f(-28.3000)*/
-{ 0, 0,123,__LINE__, 0xbfb965c0, 0x80000000, 0xc03a9999, 0x9999999a},			/* -0.09920=f(-26.6000)*/
-{ 0, 0,123,__LINE__, 0x3fc142f3, 0x40000000, 0xc038e666, 0x66666667},			/* 0.13485=f(-24.9000)*/
-{ 9, 0,123,__LINE__, 0x3fb20dcc, 0x80000000, 0xc0373333, 0x33333334},			/* 0.07052=f(-23.2000)*/
-{ 0, 0,123,__LINE__, 0xbfc4f91a, 0x80000000, 0xc0358000, 0x00000001},			/* -0.16385=f(-21.5000)*/
-{ 9, 0,123,__LINE__, 0xbfa0cd5d, 0xa0000000, 0xc033cccc, 0xccccccce},			/* -0.03281=f(-19.8000)*/
-{11, 0,123,__LINE__, 0x3fc7fb17, 0x20000000, 0xc0321999, 0x9999999b},			/* 0.18735=f(-18.1000)*/
-{ 0, 0,123,__LINE__, 0xbf8c74ec, 0x60000000, 0xc0306666, 0x66666668},			/* -0.01389=f(-16.4000)*/
-{11, 0,123,__LINE__, 0xbfca24e7, 0x80000000, 0xc02d6666, 0x6666666a},			/* -0.20425=f(-14.7000)*/
-{ 0, 0,123,__LINE__, 0x3fb2005e, 0xc0000000, 0xc02a0000, 0x00000004},			/* 0.07031=f(-13.0000)*/
-{10, 0,123,__LINE__, 0x3fcb6cb5, 0x20000000, 0xc0269999, 0x9999999e},			/* 0.21425=f(-11.3000)*/
-{10, 0,123,__LINE__, 0xbfc1dbf3, 0x20000000, 0xc0233333, 0x33333338},			/* -0.13952=f(-9.60000)*/
-{ 0, 0,123,__LINE__, 0xbfcc0e13, 0x76a0f75f, 0xc01f9999, 0x999999a3},			/* -0.21917=f(-7.90000)*/
-{ 0, 0,123,__LINE__, 0x3fcdd038, 0x4b76ea6e, 0xc018cccc, 0xccccccd6},			/* 0.23291=f(-6.20000)*/
-{10, 0,123,__LINE__, 0x3fcd9363, 0x1f6307c5, 0xc0120000, 0x00000009},			/* 0.23106=f(-4.50000)*/
-{ 0, 0,123,__LINE__, 0xbfda38ad, 0x60990597, 0xc0066666, 0x66666678},			/* -0.40970=f(-2.80000)*/
-{10, 0,123,__LINE__, 0xbfde2343, 0xc3d9fc2f, 0xbff19999, 0x999999bd},			/* -0.47090=f(-1.10000)*/
-{10, 0,123,__LINE__, 0x3fd2594f, 0x36b84437, 0x3fe33333, 0x333332ec},			/* 0.28670=f(0.60000)*/
-{ 0, 0,123,__LINE__, 0x3fe146a2, 0xad53f45b, 0x40026666, 0x66666654},			/* 0.53987=f(2.30000)*/
-{ 0, 0,123,__LINE__, 0xbfb0e834, 0xaf4808be, 0x400fffff, 0xffffffee},			/* -0.06604=f(4.00000)*/
-{10, 0,123,__LINE__, 0xbfd4bed5, 0xc276616a, 0x4016cccc, 0xccccccc4},			/* -0.32414=f(5.70000)*/
-{ 9, 0,123,__LINE__, 0x3fbc1056, 0x9ef21265, 0x401d9999, 0x99999991},			/* 0.10962=f(7.40000)*/
-{ 0, 0,123,__LINE__, 0x3fcdc04a, 0x80000000, 0x40223333, 0x3333332f},			/* 0.23243=f(9.10000)*/
-{ 0, 0,123,__LINE__, 0xbfc23283, 0x00000000, 0x40259999, 0x99999995},			/* -0.14216=f(10.8000)*/
-{ 0, 0,123,__LINE__, 0xbfc52e93, 0x80000000, 0x4028ffff, 0xfffffffb},			/* -0.16548=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0x3fc4d06c, 0xa0000000, 0x402c6666, 0x66666661},			/* 0.16261=f(14.2000)*/
-{ 0, 0,123,__LINE__, 0x3fbba7ba, 0x40000000, 0x402fcccc, 0xccccccc7},			/* 0.10802=f(15.9000)*/
-{10, 0,123,__LINE__, 0xbfc60238, 0x20000000, 0x40319999, 0x99999997},			/* -0.17194=f(17.6000)*/
-{ 9, 0,123,__LINE__, 0xbfacdf4e, 0x40000000, 0x40334ccc, 0xccccccca},			/* -0.05639=f(19.3000)*/
-{10, 0,123,__LINE__, 0x3fc5e745, 0x40000000, 0x4034ffff, 0xfffffffd},			/* 0.17112=f(21.0000)*/
-{ 0, 0,123,__LINE__, 0x3f849634, 0xc0000000, 0x4036b333, 0x33333330},			/* 0.01005=f(22.7000)*/
-{ 0, 0,123,__LINE__, 0xbfc4a256, 0xe0000000, 0x40386666, 0x66666663},			/* -0.16120=f(24.4000)*/
-{ 9, 0,123,__LINE__, 0x3f9f303a, 0xa0000000, 0x403a1999, 0x99999996},			/* 0.03045=f(26.1000)*/
-{ 0, 0,123,__LINE__, 0x3fc25cf8, 0x80000000, 0x403bcccc, 0xccccccc9},			/* 0.14346=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0xbfb07642, 0x60000000, 0x403d7fff, 0xfffffffc},			/* -0.06430=f(29.5000)*/
-0,};
-test_j1f(m)   {run_vector_1(m,j1f_vec,(char *)(j1f),"j1f","ff");   }	
diff --git a/newlib/libm/test/jn_vec.c b/newlib/libm/test/jn_vec.c
deleted file mode 100644
index a2929bf77..000000000
--- a/newlib/libm/test/jn_vec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-#include "test.h"
- one_line_type jn_vec[] = {
-{61,0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-{61,0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},
-{61,0,123,__LINE__, 0x00000000, 0x00000000, 0x40000000, 0x00000000, 0x00000000, 0x00000000},
-{61,0,123,__LINE__, 0x00000000, 0x00000000, 0x40080000, 0x00000000, 0x00000000, 0x00000000},
-{61,0,123,__LINE__, 0x00000000, 0x00000000, 0x40100000, 0x00000000, 0x00000000, 0x00000000},
-{61,0,123,__LINE__, 0x3feffae1, 0x7c1aebb8, 0x00000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3f99978d, 0x5dda2f5d, 0x3ff00000, 0x00000000, 0x3fa99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3f3479c9, 0xae7be13e, 0x40000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3ec5d788, 0x15461382, 0x40080000, 0x00000000, 0x3fa99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3e51795d, 0x7442f11f, 0x40100000, 0x00000000, 0x3fa99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3fefeb88, 0x65590ab3, 0x00000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3fa99169, 0x52566dfd, 0x3ff00000, 0x00000000, 0x3fb99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3f547683, 0x25fd91e1, 0x40000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3ef5d4e9, 0x3442db3c, 0x40080000, 0x00000000, 0x3fb99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3e9177b0, 0x11ba6ea0, 0x40100000, 0x00000000, 0x3fb99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3fefd1fc, 0x19331411, 0x00000000, 0x00000000, 0x3fc33333, 0x33333334},
-{61,0,123,__LINE__, 0x3fb32563, 0x927c0add, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333334},
-{61,0,123,__LINE__, 0x3f66ff30, 0x46535fa1, 0x40000000, 0x00000000, 0x3fc33333, 0x33333334},
-{61,0,123,__LINE__, 0x3f1267f5, 0xd0689e2d, 0x40080000, 0x00000000, 0x3fc33333, 0x33333334},
-{61,0,123,__LINE__, 0x3eb617f1, 0x7b30b575, 0x40100000, 0x00000000, 0x3fc33333, 0x33333334},
-{61,0,123,__LINE__, 0x3fefae48, 0xd9bfc0d4, 0x00000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3fb978e2, 0xf61c3bd6, 0x3ff00000, 0x00000000, 0x3fc99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3f74696c, 0xf1c4fb46, 0x40000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3f25ca70, 0x33fc81fd, 0x40080000, 0x00000000, 0x3fc99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3ed170fb, 0xdefa5db8, 0x40100000, 0x00000000, 0x3fc99999, 0x9999999a},
-{61,0,123,__LINE__, 0x3fef807f, 0xc72aa864, 0x00000000, 0x00000000, 0x3fd00000, 0x00000000},
-{61,0,123,__LINE__, 0x3fbfc02a, 0x9c749ee9, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000000},
-{61,0,123,__LINE__, 0x3f7fd56a, 0xa4fb4242, 0x40000000, 0x00000000, 0x3fd00000, 0x00000000},
-{61,0,123,__LINE__, 0x3f354008, 0x86a35a2f, 0x40080000, 0x00000000, 0x3fd00000, 0x00000000},
-{61,0,123,__LINE__, 0x3ee54449, 0xf38a05f2, 0x40100000, 0x00000000, 0x3fd00000, 0x00000000},
-{61,0,123,__LINE__, 0x3fef48b6, 0xd692fb9e, 0x00000000, 0x00000000, 0x3fd33333, 0x33333333},
-{61,0,123,__LINE__, 0x3fc2fc1c, 0x68a32001, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333333},
-{61,0,123,__LINE__, 0x3f86de20, 0x9f39196e, 0x40000000, 0x00000000, 0x3fd33333, 0x33333333},
-{61,0,123,__LINE__, 0x3f42541c, 0x0c752fd9, 0x40080000, 0x00000000, 0x3fd33333, 0x33333333},
-{61,0,123,__LINE__, 0x3ef604e0, 0xb2c4c00a, 0x40100000, 0x00000000, 0x3fd33333, 0x33333333},
-{61,0,123,__LINE__, 0x3fef0708, 0xc6573ae5, 0x00000000, 0x00000000, 0x3fd66666, 0x66666666},
-{61,0,123,__LINE__, 0x3fc60f09, 0xfed3cc81, 0x3ff00000, 0x00000000, 0x3fd66666, 0x66666666},
-{61,0,123,__LINE__, 0x3f8f0a84, 0xda6806f7, 0x40000000, 0x00000000, 0x3fd66666, 0x66666666},
-{61,0,123,__LINE__, 0x3f4d0bc1, 0xbfa630ab, 0x40080000, 0x00000000, 0x3fd66666, 0x66666666},
-{61,0,123,__LINE__, 0x3f045d05, 0x37bf774c, 0x40100000, 0x00000000, 0x3fd66666, 0x66666666},
-{61,0,123,__LINE__, 0x3feebb95, 0x0fd4747f, 0x00000000, 0x00000000, 0x3fd99999, 0x99999999},
-{61,0,123,__LINE__, 0x3fc91766, 0x1ebb8177, 0x3ff00000, 0x00000000, 0x3fd99999, 0x99999999},
-{61,0,123,__LINE__, 0x3f943552, 0xd2bdaaf3, 0x40000000, 0x00000000, 0x3fd99999, 0x99999999},
-{61,0,123,__LINE__, 0x3f55a0b4, 0x58ca1be8, 0x40080000, 0x00000000, 0x3fd99999, 0x99999999},
-{61,0,123,__LINE__, 0x3f115640, 0x7fcf3789, 0x40100000, 0x00000000, 0x3fd99999, 0x99999999},
-{61,0,123,__LINE__, 0x3fee667f, 0xd6a10561, 0x00000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{61,0,123,__LINE__, 0x3fcc13be, 0x77afcc52, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{61,0,123,__LINE__, 0x3f997c40, 0x76110a23, 0x40000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{61,0,123,__LINE__, 0x3f5eb65b, 0x151f786c, 0x40080000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{61,0,123,__LINE__, 0x3f1bb61b, 0x892f8cff, 0x40100000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{61,0,123,__LINE__, 0x3fee07f1, 0xd54c3f35, 0x00000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{61,0,123,__LINE__, 0x3fcf02a7, 0x1f4870d6, 0x3ff00000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{61,0,123,__LINE__, 0x3f9f56a9, 0x3f863441, 0x40000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{61,0,123,__LINE__, 0x3f650088, 0x0f70db57, 0x40080000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{61,0,123,__LINE__, 0x3f25116b, 0xd18a61a9, 0x40100000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{61,0,123,__LINE__, 0x3feda018, 0x47adb931, 0x00000000, 0x00000000, 0x3fe19999, 0x99999999},
-{61,0,123,__LINE__, 0x3fd0f15d, 0xa9534f53, 0x3ff00000, 0x00000000, 0x3fe19999, 0x99999999},
-{61,0,123,__LINE__, 0x3fa2e066, 0x08ca87ed, 0x40000000, 0x00000000, 0x3fe19999, 0x99999999},
-{61,0,123,__LINE__, 0x3f6bdca3, 0xb2679435, 0x40080000, 0x00000000, 0x3fe19999, 0x99999999},
-{61,0,123,__LINE__, 0x3f2ec3c2, 0x4d8baa6f, 0x40100000, 0x00000000, 0x3fe19999, 0x99999999},
-{61,0,123,__LINE__, 0x3fed2f24, 0xd2d06e4e, 0x00000000, 0x00000000, 0x3fe33333, 0x33333333},
-{61,0,123,__LINE__, 0x3fd2594f, 0x19ddc92f, 0x3ff00000, 0x00000000, 0x3fe33333, 0x33333333},
-{61,0,123,__LINE__, 0x3fa65b45, 0x84be102a, 0x40000000, 0x00000000, 0x3fe33333, 0x33333333},
-{61,0,123,__LINE__, 0x3f72055f, 0xdad11213, 0x40080000, 0x00000000, 0x3fe33333, 0x33333333},
-{61,0,123,__LINE__, 0x3f35b926, 0x63a336fb, 0x40100000, 0x00000000, 0x3fe33333, 0x33333333},
-{61,0,123,__LINE__, 0x3fecb54d, 0x6a872136, 0x00000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{61,0,123,__LINE__, 0x3fd3b87d, 0xc1127dbb, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{61,0,123,__LINE__, 0x3faa19b6, 0xfbcb3e9a, 0x40000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{61,0,123,__LINE__, 0x3f76d285, 0x13b1873b, 0x40080000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{61,0,123,__LINE__, 0x3f3dd3be, 0xb2075517, 0x40100000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{61,0,123,__LINE__, 0x3fec32cc, 0x34b8cc59, 0x00000000, 0x00000000, 0x3fe66666, 0x66666667},
-{61,0,123,__LINE__, 0x3fd50e44, 0x279c0546, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666667},
-{61,0,123,__LINE__, 0x3fae1952, 0x86f3b2fe, 0x40000000, 0x00000000, 0x3fe66666, 0x66666667},
-{61,0,123,__LINE__, 0x3f7c6245, 0x0da7c943, 0x40080000, 0x00000000, 0x3fe66666, 0x66666667},
-{61,0,123,__LINE__, 0x3f43fddd, 0x592928af, 0x40100000, 0x00000000, 0x3fe66666, 0x66666667},
-{61,0,123,__LINE__, 0x3feba7df, 0x6a752a19, 0x00000000, 0x00000000, 0x3fe80000, 0x00000001},
-{61,0,123,__LINE__, 0x3fd65a01, 0xd66b68bd, 0x3ff00000, 0x00000000, 0x3fe80000, 0x00000001},
-{61,0,123,__LINE__, 0x3fb12bc2, 0xf0d061c1, 0x40000000, 0x00000000, 0x3fe80000, 0x00000001},
-{61,0,123,__LINE__, 0x3f816042, 0xaaa332db, 0x40080000, 0x00000000, 0x3fe80000, 0x00000001},
-{61,0,123,__LINE__, 0x3f4a3fdc, 0xe9688cf6, 0x40100000, 0x00000000, 0x3fe80000, 0x00000001},
-{61,0,123,__LINE__, 0x3feb14c9, 0x36e29d84, 0x00000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fd79b1b, 0xab574ece, 0x3ff00000, 0x00000000, 0x3fe99999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fb368ca, 0xfa5427de, 0x40000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{61,0,123,__LINE__, 0x3f84fc41, 0xb23c60e3, 0x40080000, 0x00000000, 0x3fe99999, 0x9999999b},
-{61,0,123,__LINE__, 0x3f50eca7, 0x311cbd4c, 0x40100000, 0x00000000, 0x3fe99999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fea79cf, 0x9417f64a, 0x00000000, 0x00000000, 0x3feb3333, 0x33333335},
-{61,0,123,__LINE__, 0x3fd8d0fc, 0x2ac09609, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333335},
-{61,0,123,__LINE__, 0x3fb5c250, 0x3ceb775b, 0x40000000, 0x00000000, 0x3feb3333, 0x33333335},
-{61,0,123,__LINE__, 0x3f890a65, 0x7f429003, 0x40080000, 0x00000000, 0x3feb3333, 0x33333335},
-{61,0,123,__LINE__, 0x3f557acc, 0xd794bfe8, 0x40100000, 0x00000000, 0x3feb3333, 0x33333335},
-{61,0,123,__LINE__, 0x3fe9d73c, 0x25f5b277, 0x00000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fd9fb13, 0xce0f024e, 0x3ff00000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fb836ce, 0xdb8280b1, 0x40000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3f8d8f96, 0x8206eb0e, 0x40080000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3f5ae0f9, 0x8b7b7574, 0x40100000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fe92d5c, 0x13137d0b, 0x00000000, 0x00000000, 0x3fee6666, 0x66666669},
-{61,0,123,__LINE__, 0x3fdb18d9, 0x4eda7476, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666669},
-{61,0,123,__LINE__, 0x3fbac4b1, 0x27d714b1, 0x40000000, 0x00000000, 0x3fee6666, 0x66666669},
-{61,0,123,__LINE__, 0x3f91482d, 0xb156b6bd, 0x40080000, 0x00000000, 0x3fee6666, 0x66666669},
-{61,0,123,__LINE__, 0x3f609b4b, 0x7ea68879, 0x40100000, 0x00000000, 0x3fee6666, 0x66666669},
-{61,0,123,__LINE__, 0x3fe87c7f, 0xdbd7b8ee, 0x00000000, 0x00000000, 0x3ff00000, 0x00000001},
-{61,0,123,__LINE__, 0x3fdc29c9, 0xee970c6e, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000001},
-{61,0,123,__LINE__, 0x3fbd6a50, 0x95fa9be9, 0x40000000, 0x00000000, 0x3ff00000, 0x00000001},
-{61,0,123,__LINE__, 0x3f94086a, 0x7638f7a6, 0x40080000, 0x00000000, 0x3ff00000, 0x00000001},
-{61,0,123,__LINE__, 0x3f6449e3, 0x6b5af1b3, 0x40100000, 0x00000000, 0x3ff00000, 0x00000001},
-{61,0,123,__LINE__, 0x3fe7c4fb, 0x2fcfebef, 0x00000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{61,0,123,__LINE__, 0x3fdd2d69, 0xba9c976c, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{61,0,123,__LINE__, 0x3fc012fb, 0x5cfc78b3, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{61,0,123,__LINE__, 0x3f970a5d, 0x1eef9226, 0x40080000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{61,0,123,__LINE__, 0x3f6888a5, 0x228510b7, 0x40100000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{61,0,123,__LINE__, 0x3fe70724, 0xc161d44c, 0x00000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fde2343, 0xcc63c37e, 0x3ff00000, 0x00000000, 0x3ff19999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fc17aef, 0x27865e62, 0x40000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{61,0,123,__LINE__, 0x3f9a4faa, 0xa04e8191, 0x40080000, 0x00000000, 0x3ff19999, 0x9999999b},
-{61,0,123,__LINE__, 0x3f6d6434, 0x5a55c316, 0x40100000, 0x00000000, 0x3ff19999, 0x9999999b},
-{61,0,123,__LINE__, 0x3fe64356, 0x17eddc81, 0x00000000, 0x00000000, 0x3ff26666, 0x66666668},
-{61,0,123,__LINE__, 0x3fdf0aea, 0x85d5bf18, 0x3ff00000, 0x00000000, 0x3ff26666, 0x66666668},
-{61,0,123,__LINE__, 0x3fc2ec1a, 0x23e21b78, 0x40000000, 0x00000000, 0x3ff26666, 0x66666668},
-{61,0,123,__LINE__, 0x3f9dd9bf, 0xb5a70ade, 0x40080000, 0x00000000, 0x3ff26666, 0x66666668},
-{61,0,123,__LINE__, 0x3f7174b5, 0x74230428, 0x40100000, 0x00000000, 0x3ff26666, 0x66666668},
-{61,0,123,__LINE__, 0x3fe579eb, 0x607c7c41, 0x00000000, 0x00000000, 0x3ff33333, 0x33333335},
-{61,0,123,__LINE__, 0x3fdfe3f7, 0xc98d2caf, 0x3ff00000, 0x00000000, 0x3ff33333, 0x33333335},
-{61,0,123,__LINE__, 0x3fc4658c, 0x7339f932, 0x40000000, 0x00000000, 0x3ff33333, 0x33333335},
-{61,0,123,__LINE__, 0x3fa0d4e7, 0xb3f0ea6f, 0x40080000, 0x00000000, 0x3ff33333, 0x33333335},
-{61,0,123,__LINE__, 0x3f7492a5, 0xb6657ad7, 0x40100000, 0x00000000, 0x3ff33333, 0x33333335},
-{61,0,123,__LINE__, 0x3fe4ab43, 0x3d10e1be, 0x00000000, 0x00000000, 0x3ff40000, 0x00000002},
-{61,0,123,__LINE__, 0x3fe05706, 0x9774d334, 0x3ff00000, 0x00000000, 0x3ff40000, 0x00000002},
-{61,0,123,__LINE__, 0x3fc5e650, 0x6ea82715, 0x40000000, 0x00000000, 0x3ff40000, 0x00000002},
-{61,0,123,__LINE__, 0x3fa2e068, 0xdde7f41d, 0x40080000, 0x00000000, 0x3ff40000, 0x00000002},
-{61,0,123,__LINE__, 0x3f781279, 0xda92ee2f, 0x40100000, 0x00000000, 0x3ff40000, 0x00000002},
-{61,0,123,__LINE__, 0x3fe3d7be, 0x92bbfbb9, 0x00000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fe0b46a, 0x18ecb9d4, 0x3ff00000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fc76d6b, 0x3ac0d75b, 0x40000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fa50fc1, 0x44526e78, 0x40080000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3f7bfac7, 0x6edc65a7, 0x40100000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{61,0,123,__LINE__, 0x3fe2ffc0, 0x568baaa2, 0x00000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{61,0,123,__LINE__, 0x3fe109ff, 0x2f1fc3ec, 0x3ff00000, 0x00000000, 0x3ff59999, 0x9999999c},
-{61,0,123,__LINE__, 0x3fc8f9dd, 0x5e41b884, 0x40000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{61,0,123,__LINE__, 0x3fa76330, 0x3bb95571, 0x40080000, 0x00000000, 0x3ff59999, 0x9999999c},
-{61,0,123,__LINE__, 0x3f802911, 0xcfdfbbf5, 0x40100000, 0x00000000, 0x3ff59999, 0x9999999c},
-{61,0,123,__LINE__, 0x3fe223ad, 0x59727c9e, 0x00000000, 0x00000000, 0x3ff66666, 0x66666669},
-{61,0,123,__LINE__, 0x3fe157a2, 0xbb6f3312, 0x3ff00000, 0x00000000, 0x3ff66666, 0x66666669},
-{61,0,123,__LINE__, 0x3fca8aa3, 0x5b8ce82e, 0x40000000, 0x00000000, 0x3ff66666, 0x66666669},
-{61,0,123,__LINE__, 0x3fa9dad6, 0x163299ee, 0x40080000, 0x00000000, 0x3ff66666, 0x66666669},
-{61,0,123,__LINE__, 0x3f828f8e, 0x0cde14e4, 0x40100000, 0x00000000, 0x3ff66666, 0x66666669},
-{61,0,123,__LINE__, 0x3fe143ec, 0x1344e613, 0x00000000, 0x00000000, 0x3ff73333, 0x33333336},
-{61,0,123,__LINE__, 0x3fe19d35, 0xcbd98b75, 0x3ff00000, 0x00000000, 0x3ff73333, 0x33333336},
-{61,0,123,__LINE__, 0x3fcc1eb6, 0x4c93d2fc, 0x40000000, 0x00000000, 0x3ff73333, 0x33333336},
-{61,0,123,__LINE__, 0x3fac76b3, 0xcd3060b1, 0x40080000, 0x00000000, 0x3ff73333, 0x33333336},
-{61,0,123,__LINE__, 0x3f853417, 0xedc03cbe, 0x40100000, 0x00000000, 0x3ff73333, 0x33333336},
-{61,0,123,__LINE__, 0x3fe060e4, 0x6ce96517, 0x00000000, 0x00000000, 0x3ff80000, 0x00000003},
-{61,0,123,__LINE__, 0x3fe1da9d, 0xa9d6fc82, 0x3ff00000, 0x00000000, 0x3ff80000, 0x00000003},
-{61,0,123,__LINE__, 0x3fcdb50c, 0x80d5039f, 0x40000000, 0x00000000, 0x3ff80000, 0x00000003},
-{61,0,123,__LINE__, 0x3faf36aa, 0xc0c5b3bb, 0x40080000, 0x00000000, 0x3ff80000, 0x00000003},
-{61,0,123,__LINE__, 0x3f8819e3, 0xff0b0187, 0x40100000, 0x00000000, 0x3ff80000, 0x00000003},
-{61,0,123,__LINE__, 0x3fdef5ff, 0x13b2d492, 0x00000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{61,0,123,__LINE__, 0x3fe20fc3, 0xe6dcf000, 0x3ff00000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{61,0,123,__LINE__, 0x3fcf4c9a, 0x1d0ea964, 0x40000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{61,0,123,__LINE__, 0x3fb10d3e, 0x464b660f, 0x40080000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{61,0,123,__LINE__, 0x3f8b4418, 0x3c555ec0, 0x40100000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{61,0,123,__LINE__, 0x3fdd254f, 0x22227934, 0x00000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{61,0,123,__LINE__, 0x3fe23c96, 0x66824fe1, 0x3ff00000, 0x00000000, 0x3ff99999, 0x9999999d},
-{61,0,123,__LINE__, 0x3fd07228, 0xde234e77, 0x40000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{61,0,123,__LINE__, 0x3fb290e5, 0x794e918a, 0x40080000, 0x00000000, 0x3ff99999, 0x9999999d},
-{61,0,123,__LINE__, 0x3f8eb5c8, 0x72cb3f07, 0x40100000, 0x00000000, 0x3ff99999, 0x9999999d},
-{61,0,123,__LINE__, 0x3fdb508e, 0xeb1aae8c, 0x00000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{61,0,123,__LINE__, 0x3fe26107, 0x663f6e91, 0x3ff00000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{61,0,123,__LINE__, 0x3fd13d92, 0x88e3f0dd, 0x40000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{61,0,123,__LINE__, 0x3fb4260b, 0xedecb2c7, 0x40080000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{61,0,123,__LINE__, 0x3f9138f9, 0x5390ebd3, 0x40100000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{61,0,123,__LINE__, 0x3fd97895, 0x7ce7f2cf, 0x00000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{61,0,123,__LINE__, 0x3fe27d0d, 0x82c5db53, 0x3ff00000, 0x00000000, 0x3ffb3333, 0x33333337},
-{61,0,123,__LINE__, 0x3fd20802, 0xc5da89b2, 0x40000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{61,0,123,__LINE__, 0x3fb5cc62, 0xb77f9eb0, 0x40080000, 0x00000000, 0x3ffb3333, 0x33333337},
-{61,0,123,__LINE__, 0x3f933dbd, 0xc0e89d76, 0x40100000, 0x00000000, 0x3ffb3333, 0x33333337},
-{61,0,123,__LINE__, 0x3fd79e3a, 0x9e138ae6, 0x00000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{61,0,123,__LINE__, 0x3fe290a3, 0xbaedcc46, 0x3ff00000, 0x00000000, 0x3ffc0000, 0x00000004},
-{61,0,123,__LINE__, 0x3fd2d0f2, 0x7ae76c8a, 0x40000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{61,0,123,__LINE__, 0x3fb7838b, 0x1e8c5990, 0x40080000, 0x00000000, 0x3ffc0000, 0x00000004},
-{61,0,123,__LINE__, 0x3f956a95, 0x623295f7, 0x40100000, 0x00000000, 0x3ffc0000, 0x00000004},
-{61,0,123,__LINE__, 0x3fd5c256, 0x5d20c7de, 0x00000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{61,0,123,__LINE__, 0x3fe29bc9, 0x703828ac, 0x3ff00000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{61,0,123,__LINE__, 0x3fd397db, 0x0e06aef0, 0x40000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{61,0,123,__LINE__, 0x3fb94b16, 0xc2085bbd, 0x40080000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{61,0,123,__LINE__, 0x3f97c0d3, 0xe559d7ff, 0x40100000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{61,0,123,__LINE__, 0x3fd3e5c0, 0xa05c4025, 0x00000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{61,0,123,__LINE__, 0x3fe29e82, 0x64e59f5a, 0x3ff00000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{61,0,123,__LINE__, 0x3fd45c36, 0xb655f5cb, 0x40000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{61,0,123,__LINE__, 0x3fbb2287, 0xc3831b75, 0x40080000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{61,0,123,__LINE__, 0x3f9a41bb, 0x0d6129f8, 0x40100000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{61,0,123,__LINE__, 0x3fd20950, 0xb5facde5, 0x00000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{61,0,123,__LINE__, 0x3fe298d6, 0xb7a495db, 0x3ff00000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{61,0,123,__LINE__, 0x3fd51d80, 0xcca30f3c, 0x40000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{61,0,123,__LINE__, 0x3fbd0950, 0xfe1d8095, 0x40080000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{61,0,123,__LINE__, 0x3f9cee79, 0x030dd010, 0x40100000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{61,0,123,__LINE__, 0x3fd02ddc, 0xe4c5e3e8, 0x00000000, 0x00000000, 0x3fff3333, 0x33333338},
-{61,0,123,__LINE__, 0x3fe28ad2, 0xdcd91caf, 0x3ff00000, 0x00000000, 0x3fff3333, 0x33333338},
-{61,0,123,__LINE__, 0x3fd5db36, 0x1b535d7a, 0x40000000, 0x00000000, 0x3fff3333, 0x33333338},
-{61,0,123,__LINE__, 0x3fbefed6, 0x4831e4df, 0x40080000, 0x00000000, 0x3fff3333, 0x33333338},
-{61,0,123,__LINE__, 0x3f9fc826, 0xafa66438, 0x40100000, 0x00000000, 0x3fff3333, 0x33333338},
-0,};
-test_jn(m)   {run_vector_1(m,jn_vec,(char *)(jn),"jn","did");   }	
diff --git a/newlib/libm/test/jnf_vec.c b/newlib/libm/test/jnf_vec.c
deleted file mode 100644
index 1c9a4dba7..000000000
--- a/newlib/libm/test/jnf_vec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-#include "test.h"
- one_line_type jnf_vec[] = {
-{32,0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-{32,0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},
-{32,0,123,__LINE__, 0x00000000, 0x00000000, 0x40000000, 0x00000000, 0x00000000, 0x00000000},
-{32,0,123,__LINE__, 0x00000000, 0x00000000, 0x40080000, 0x00000000, 0x00000000, 0x00000000},
-{32,0,123,__LINE__, 0x00000000, 0x00000000, 0x40100000, 0x00000000, 0x00000000, 0x00000000},
-{32,0,123,__LINE__, 0x3feffae1, 0x7c1aebb8, 0x00000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3f99978d, 0x5dda2f5d, 0x3ff00000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3f3479c9, 0xae7be13e, 0x40000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3ec5d788, 0x15461382, 0x40080000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3e51795d, 0x7442f11f, 0x40100000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3fefeb88, 0x65590ab3, 0x00000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3fa99169, 0x52566dfd, 0x3ff00000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3f547683, 0x25fd91e1, 0x40000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3ef5d4e9, 0x3442db3c, 0x40080000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3e9177b0, 0x11ba6ea0, 0x40100000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3fefd1fc, 0x19331411, 0x00000000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0x3fb32563, 0x927c0add, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0x3f66ff30, 0x46535fa1, 0x40000000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0x3f1267f5, 0xd0689e2d, 0x40080000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0x3eb617f1, 0x7b30b575, 0x40100000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0x3fefae48, 0xd9bfc0d4, 0x00000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3fb978e2, 0xf61c3bd6, 0x3ff00000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3f74696c, 0xf1c4fb46, 0x40000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3f25ca70, 0x33fc81fd, 0x40080000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3ed170fb, 0xdefa5db8, 0x40100000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0x3fef807f, 0xc72aa864, 0x00000000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0x3fbfc02a, 0x9c749ee9, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0x3f7fd56a, 0xa4fb4242, 0x40000000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0x3f354008, 0x86a35a2f, 0x40080000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0x3ee54449, 0xf38a05f2, 0x40100000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0x3fef48b6, 0xd692fb9e, 0x00000000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0x3fc2fc1c, 0x68a32001, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0x3f86de20, 0x9f39196e, 0x40000000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0x3f42541c, 0x0c752fd9, 0x40080000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0x3ef604e0, 0xb2c4c00a, 0x40100000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0x3fef0708, 0xc6573ae5, 0x00000000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0x3fc60f09, 0xfed3cc81, 0x3ff00000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0x3f8f0a84, 0xda6806f7, 0x40000000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0x3f4d0bc1, 0xbfa630ab, 0x40080000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0x3f045d05, 0x37bf774c, 0x40100000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0x3feebb95, 0x0fd4747f, 0x00000000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0x3fc91766, 0x1ebb8177, 0x3ff00000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0x3f943552, 0xd2bdaaf3, 0x40000000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0x3f55a0b4, 0x58ca1be8, 0x40080000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0x3f115640, 0x7fcf3789, 0x40100000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0x3fee667f, 0xd6a10561, 0x00000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x3fcc13be, 0x77afcc52, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x3f997c40, 0x76110a23, 0x40000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x3f5eb65b, 0x151f786c, 0x40080000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x3f1bb61b, 0x892f8cff, 0x40100000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0x3fee07f1, 0xd54c3f35, 0x00000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0x3fcf02a7, 0x1f4870d6, 0x3ff00000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0x3f9f56a9, 0x3f863441, 0x40000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0x3f650088, 0x0f70db57, 0x40080000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0x3f25116b, 0xd18a61a9, 0x40100000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0x3feda018, 0x47adb931, 0x00000000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0x3fd0f15d, 0xa9534f53, 0x3ff00000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0x3fa2e066, 0x08ca87ed, 0x40000000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0x3f6bdca3, 0xb2679435, 0x40080000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0x3f2ec3c2, 0x4d8baa6f, 0x40100000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0x3fed2f24, 0xd2d06e4e, 0x00000000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0x3fd2594f, 0x19ddc92f, 0x3ff00000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0x3fa65b45, 0x84be102a, 0x40000000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0x3f72055f, 0xdad11213, 0x40080000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0x3f35b926, 0x63a336fb, 0x40100000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0x3fecb54d, 0x6a872136, 0x00000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0x3fd3b87d, 0xc1127dbb, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0x3faa19b6, 0xfbcb3e9a, 0x40000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0x3f76d285, 0x13b1873b, 0x40080000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0x3f3dd3be, 0xb2075517, 0x40100000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0x3fec32cc, 0x34b8cc59, 0x00000000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0x3fd50e44, 0x279c0546, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0x3fae1952, 0x86f3b2fe, 0x40000000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0x3f7c6245, 0x0da7c943, 0x40080000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0x3f43fddd, 0x592928af, 0x40100000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0x3feba7df, 0x6a752a19, 0x00000000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0x3fd65a01, 0xd66b68bd, 0x3ff00000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0x3fb12bc2, 0xf0d061c1, 0x40000000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0x3f816042, 0xaaa332db, 0x40080000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0x3f4a3fdc, 0xe9688cf6, 0x40100000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0x3feb14c9, 0x36e29d84, 0x00000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fd79b1b, 0xab574ece, 0x3ff00000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fb368ca, 0xfa5427de, 0x40000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0x3f84fc41, 0xb23c60e3, 0x40080000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0x3f50eca7, 0x311cbd4c, 0x40100000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fea79cf, 0x9417f64a, 0x00000000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0x3fd8d0fc, 0x2ac09609, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0x3fb5c250, 0x3ceb775b, 0x40000000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0x3f890a65, 0x7f429003, 0x40080000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0x3f557acc, 0xd794bfe8, 0x40100000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0x3fe9d73c, 0x25f5b277, 0x00000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fd9fb13, 0xce0f024e, 0x3ff00000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fb836ce, 0xdb8280b1, 0x40000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3f8d8f96, 0x8206eb0e, 0x40080000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3f5ae0f9, 0x8b7b7574, 0x40100000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fe92d5c, 0x13137d0b, 0x00000000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3fdb18d9, 0x4eda7476, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3fbac4b1, 0x27d714b1, 0x40000000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3f91482d, 0xb156b6bd, 0x40080000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3f609b4b, 0x7ea68879, 0x40100000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3fe87c7f, 0xdbd7b8ee, 0x00000000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3fdc29c9, 0xee970c6e, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3fbd6a50, 0x95fa9be9, 0x40000000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3f94086a, 0x7638f7a6, 0x40080000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3f6449e3, 0x6b5af1b3, 0x40100000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3fe7c4fb, 0x2fcfebef, 0x00000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3fdd2d69, 0xba9c976c, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3fc012fb, 0x5cfc78b3, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3f970a5d, 0x1eef9226, 0x40080000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3f6888a5, 0x228510b7, 0x40100000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3fe70724, 0xc161d44c, 0x00000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fde2343, 0xcc63c37e, 0x3ff00000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fc17aef, 0x27865e62, 0x40000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3f9a4faa, 0xa04e8191, 0x40080000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3f6d6434, 0x5a55c316, 0x40100000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fe64356, 0x17eddc81, 0x00000000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3fdf0aea, 0x85d5bf18, 0x3ff00000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3fc2ec1a, 0x23e21b78, 0x40000000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3f9dd9bf, 0xb5a70ade, 0x40080000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3f7174b5, 0x74230428, 0x40100000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3fe579eb, 0x607c7c41, 0x00000000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3fdfe3f7, 0xc98d2caf, 0x3ff00000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3fc4658c, 0x7339f932, 0x40000000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3fa0d4e7, 0xb3f0ea6f, 0x40080000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3f7492a5, 0xb6657ad7, 0x40100000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3fe4ab43, 0x3d10e1be, 0x00000000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3fe05706, 0x9774d334, 0x3ff00000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3fc5e650, 0x6ea82715, 0x40000000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3fa2e068, 0xdde7f41d, 0x40080000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3f781279, 0xda92ee2f, 0x40100000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3fe3d7be, 0x92bbfbb9, 0x00000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fe0b46a, 0x18ecb9d4, 0x3ff00000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fc76d6b, 0x3ac0d75b, 0x40000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fa50fc1, 0x44526e78, 0x40080000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3f7bfac7, 0x6edc65a7, 0x40100000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fe2ffc0, 0x568baaa2, 0x00000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3fe109ff, 0x2f1fc3ec, 0x3ff00000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3fc8f9dd, 0x5e41b884, 0x40000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3fa76330, 0x3bb95571, 0x40080000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3f802911, 0xcfdfbbf5, 0x40100000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3fe223ad, 0x59727c9e, 0x00000000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3fe157a2, 0xbb6f3312, 0x3ff00000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3fca8aa3, 0x5b8ce82e, 0x40000000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3fa9dad6, 0x163299ee, 0x40080000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3f828f8e, 0x0cde14e4, 0x40100000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3fe143ec, 0x1344e613, 0x00000000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3fe19d35, 0xcbd98b75, 0x3ff00000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3fcc1eb6, 0x4c93d2fc, 0x40000000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3fac76b3, 0xcd3060b1, 0x40080000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3f853417, 0xedc03cbe, 0x40100000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3fe060e4, 0x6ce96517, 0x00000000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3fe1da9d, 0xa9d6fc82, 0x3ff00000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3fcdb50c, 0x80d5039f, 0x40000000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3faf36aa, 0xc0c5b3bb, 0x40080000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3f8819e3, 0xff0b0187, 0x40100000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3fdef5ff, 0x13b2d492, 0x00000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3fe20fc3, 0xe6dcf000, 0x3ff00000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3fcf4c9a, 0x1d0ea964, 0x40000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3fb10d3e, 0x464b660f, 0x40080000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3f8b4418, 0x3c555ec0, 0x40100000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3fdd254f, 0x22227934, 0x00000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fe23c96, 0x66824fe1, 0x3ff00000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fd07228, 0xde234e77, 0x40000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fb290e5, 0x794e918a, 0x40080000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3f8eb5c8, 0x72cb3f07, 0x40100000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fdb508e, 0xeb1aae8c, 0x00000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3fe26107, 0x663f6e91, 0x3ff00000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3fd13d92, 0x88e3f0dd, 0x40000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3fb4260b, 0xedecb2c7, 0x40080000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3f9138f9, 0x5390ebd3, 0x40100000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3fd97895, 0x7ce7f2cf, 0x00000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3fe27d0d, 0x82c5db53, 0x3ff00000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3fd20802, 0xc5da89b2, 0x40000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3fb5cc62, 0xb77f9eb0, 0x40080000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3f933dbd, 0xc0e89d76, 0x40100000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3fd79e3a, 0x9e138ae6, 0x00000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3fe290a3, 0xbaedcc46, 0x3ff00000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3fd2d0f2, 0x7ae76c8a, 0x40000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3fb7838b, 0x1e8c5990, 0x40080000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3f956a95, 0x623295f7, 0x40100000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3fd5c256, 0x5d20c7de, 0x00000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fe29bc9, 0x703828ac, 0x3ff00000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fd397db, 0x0e06aef0, 0x40000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fb94b16, 0xc2085bbd, 0x40080000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3f97c0d3, 0xe559d7ff, 0x40100000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fd3e5c0, 0xa05c4025, 0x00000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3fe29e82, 0x64e59f5a, 0x3ff00000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3fd45c36, 0xb655f5cb, 0x40000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3fbb2287, 0xc3831b75, 0x40080000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3f9a41bb, 0x0d6129f8, 0x40100000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3fd20950, 0xb5facde5, 0x00000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe298d6, 0xb7a495db, 0x3ff00000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fd51d80, 0xcca30f3c, 0x40000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fbd0950, 0xfe1d8095, 0x40080000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3f9cee79, 0x030dd010, 0x40100000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fd02ddc, 0xe4c5e3e8, 0x00000000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0x3fe28ad2, 0xdcd91caf, 0x3ff00000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0x3fd5db36, 0x1b535d7a, 0x40000000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0x3fbefed6, 0x4831e4df, 0x40080000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0x3f9fc826, 0xafa66438, 0x40100000, 0x00000000, 0x3fff3333, 0x33333338},
-0,};
-test_jnf(m)   {run_vector_1(m,jnf_vec,(char *)(jnf),"jnf","fif");   }	
diff --git a/newlib/libm/test/log10_vec.c b/newlib/libm/test/log10_vec.c
deleted file mode 100644
index 48975a7f2..000000000
--- a/newlib/libm/test/log10_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type log10_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0xc02e05a6, 0x2c6e0cb0, 0x3cd19000, 0x00000000},			/* -15.0110=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0xbfffffff, 0xffffff42, 0x3f847ae1, 0x47ae16ad},			/* -2.00000=f(0.01000)*/
-{64, 0,123,__LINE__, 0xbffb2efb, 0x2bd82120, 0x3f947ae1, 0x47ae1594},			/* -1.69897=f(0.02000)*/
-{64, 0,123,__LINE__, 0xbff85db6, 0x1a6c0a41, 0x3f9eb851, 0xeb851fd2},			/* -1.52287=f(0.03000)*/
-{64, 0,123,__LINE__, 0xbff65df6, 0x57b042d0, 0x3fa47ae1, 0x47ae1508},			/* -1.39794=f(0.04000)*/
-{64, 0,123,__LINE__, 0xbff4d104, 0xd427de59, 0x3fa99999, 0x99999a27},			/* -1.30103=f(0.05000)*/
-{64, 0,123,__LINE__, 0xbff38cb1, 0x46442be1, 0x3faeb851, 0xeb851f46},			/* -1.22184=f(0.06000)*/
-{64, 0,123,__LINE__, 0xbff27a7a, 0x7a4399c5, 0x3fb1eb85, 0x1eb85232},			/* -1.15490=f(0.07000)*/
-{64, 0,123,__LINE__, 0xbff18cf1, 0x83886469, 0x3fb47ae1, 0x47ae14c1},			/* -1.09691=f(0.08000)*/
-{64, 0,123,__LINE__, 0xbff0bb6c, 0x34d814ec, 0x3fb70a3d, 0x70a3d750},			/* -1.04575=f(0.09000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffffda, 0x3fb99999, 0x999999df},			/* -0.01000=f(0.10000)*/
-{64, 0,123,__LINE__, 0xbfeeace9, 0x3f5e7501, 0x3fbc28f5, 0xc28f5c6e},			/* -0.95860=f(0.11000)*/
-{64, 0,123,__LINE__, 0xbfed7758, 0xe4389ae3, 0x3fbeb851, 0xeb851efd},			/* -0.92081=f(0.12000)*/
-{64, 0,123,__LINE__, 0xbfec5a93, 0x7887db46, 0x3fc0a3d7, 0x0a3d70c6},			/* -0.88605=f(0.13000)*/
-{64, 0,123,__LINE__, 0xbfeb52eb, 0x4c3776a6, 0x3fc1eb85, 0x1eb8520e},			/* -0.85387=f(0.14000)*/
-{64, 0,123,__LINE__, 0xbfea5d75, 0xdd27d1e8, 0x3fc33333, 0x33333356},			/* -0.82390=f(0.15000)*/
-{64, 0,123,__LINE__, 0xbfe977d9, 0x5ec10bea, 0x3fc47ae1, 0x47ae149e},			/* -0.79588=f(0.16000)*/
-{64, 0,123,__LINE__, 0xbfe8a029, 0x956904ba, 0x3fc5c28f, 0x5c28f5e6},			/* -0.76955=f(0.17000)*/
-{64, 0,123,__LINE__, 0xbfe7d4ce, 0xc1606ced, 0x3fc70a3d, 0x70a3d72e},			/* -0.74472=f(0.18000)*/
-{64, 0,123,__LINE__, 0xbfe71473, 0x54087dcb, 0x3fc851eb, 0x851eb876},			/* -0.72124=f(0.19000)*/
-{64, 0,123,__LINE__, 0xbfe65df6, 0x57b042ed, 0x3fc99999, 0x999999be},			/* -0.69897=f(0.20000)*/
-{64, 0,123,__LINE__, 0xbfe5b061, 0x295f48af, 0x3fcae147, 0xae147b06},			/* -0.67778=f(0.21000)*/
-{64, 0,123,__LINE__, 0xbfe50adf, 0x970eb811, 0x3fcc28f5, 0xc28f5c4e},			/* -0.65757=f(0.22000)*/
-{64, 0,123,__LINE__, 0xbfe46cb9, 0xbec80cf0, 0x3fcd70a3, 0xd70a3d96},			/* -0.63827=f(0.23000)*/
-{64, 0,123,__LINE__, 0xbfe3d54f, 0x3be8ddf2, 0x3fceb851, 0xeb851ede},			/* -0.61978=f(0.24000)*/
-{64, 0,123,__LINE__, 0xbfe34413, 0x509f79ee, 0x3fd00000, 0x00000013},			/* -0.60205=f(0.25000)*/
-{64, 0,123,__LINE__, 0xbfe2b889, 0xd0381e52, 0x3fd0a3d7, 0x0a3d70b7},			/* -0.58502=f(0.26000)*/
-{64, 0,123,__LINE__, 0xbfe23244, 0x9e883ef4, 0x3fd147ae, 0x147ae15b},			/* -0.56863=f(0.27000)*/
-{64, 0,123,__LINE__, 0xbfe1b0e1, 0xa3e7b9b3, 0x3fd1eb85, 0x1eb851ff},			/* -0.55284=f(0.28000)*/
-{64, 0,123,__LINE__, 0xbfe13409, 0x1d29381d, 0x3fd28f5c, 0x28f5c2a3},			/* -0.53760=f(0.29000)*/
-{64, 0,123,__LINE__, 0xbfe0bb6c, 0x34d814f3, 0x3fd33333, 0x33333347},			/* -0.52287=f(0.30000)*/
-{64, 0,123,__LINE__, 0xbfe046c3, 0xd74f3025, 0x3fd3d70a, 0x3d70a3eb},			/* -0.50863=f(0.31000)*/
-{64, 0,123,__LINE__, 0xbfdfab9f, 0x6ce29de9, 0x3fd47ae1, 0x47ae148f},			/* -0.49485=f(0.32000)*/
-{64, 0,123,__LINE__, 0xbfded0aa, 0xe86d142e, 0x3fd51eb8, 0x51eb8533},			/* -0.48148=f(0.33000)*/
-{64, 0,123,__LINE__, 0xbfddfc3f, 0xda328f8a, 0x3fd5c28f, 0x5c28f5d7},			/* -0.46852=f(0.34000)*/
-{64, 0,123,__LINE__, 0xbfdd2dfd, 0x39ade168, 0x3fd66666, 0x6666667b},			/* -0.45593=f(0.35000)*/
-{64, 0,123,__LINE__, 0xbfdc658a, 0x32215fee, 0x3fd70a3d, 0x70a3d71f},			/* -0.44369=f(0.36000)*/
-{64, 0,123,__LINE__, 0xbfdba295, 0x3c667de6, 0x3fd7ae14, 0x7ae147c3},			/* -0.43179=f(0.37000)*/
-{64, 0,123,__LINE__, 0xbfdae4d3, 0x577181a7, 0x3fd851eb, 0x851eb867},			/* -0.42021=f(0.38000)*/
-{64, 0,123,__LINE__, 0xbfda2bff, 0x5abfe0af, 0x3fd8f5c2, 0x8f5c290b},			/* -0.40893=f(0.39000)*/
-{64, 0,123,__LINE__, 0xbfd977d9, 0x5ec10beb, 0x3fd99999, 0x999999af},			/* -0.39794=f(0.40000)*/
-{64, 0,123,__LINE__, 0xbfd8c826, 0x37f7ce88, 0x3fda3d70, 0xa3d70a53},			/* -0.38721=f(0.41000)*/
-{64, 0,123,__LINE__, 0xbfd81caf, 0x021f176f, 0x3fdae147, 0xae147af7},			/* -0.37675=f(0.42000)*/
-{64, 0,123,__LINE__, 0xbfd77540, 0xb90f3c14, 0x3fdb851e, 0xb851eb9b},			/* -0.36653=f(0.43000)*/
-{64, 0,123,__LINE__, 0xbfd6d1ab, 0xdd7df632, 0x3fdc28f5, 0xc28f5c3f},			/* -0.35654=f(0.44000)*/
-{64, 0,123,__LINE__, 0xbfd631c4, 0x23ffcdef, 0x3fdccccc, 0xcccccce3},			/* -0.34678=f(0.45000)*/
-{64, 0,123,__LINE__, 0xbfd59560, 0x2cf09fef, 0x3fdd70a3, 0xd70a3d87},			/* -0.33724=f(0.46000)*/
-{64, 0,123,__LINE__, 0xbfd4fc59, 0x441d1574, 0x3fde147a, 0xe147ae2b},			/* -0.32790=f(0.47000)*/
-{64, 0,123,__LINE__, 0xbfd4668b, 0x273241f2, 0x3fdeb851, 0xeb851ecf},			/* -0.31875=f(0.48000)*/
-{64, 0,123,__LINE__, 0xbfd3d3d3, 0xd21cceef, 0x3fdf5c28, 0xf5c28f73},			/* -0.30980=f(0.49000)*/
-{64, 0,123,__LINE__, 0xbfd34413, 0x509f79ec, 0x3fe00000, 0x0000000b},			/* -0.30103=f(0.50000)*/
-{64, 0,123,__LINE__, 0xbfd2b72b, 0x94823393, 0x3fe051eb, 0x851eb85d},			/* -0.29242=f(0.51000)*/
-{64, 0,123,__LINE__, 0xbfd22d00, 0x4fd0c2b2, 0x3fe0a3d7, 0x0a3d70af},			/* -0.28399=f(0.52000)*/
-{64, 0,123,__LINE__, 0xbfd1a576, 0xd2b216df, 0x3fe0f5c2, 0x8f5c2901},			/* -0.27572=f(0.53000)*/
-{64, 0,123,__LINE__, 0xbfd12075, 0xec7103f7, 0x3fe147ae, 0x147ae153},			/* -0.26760=f(0.54000)*/
-{64, 0,123,__LINE__, 0xbfd09de5, 0xcf5c6433, 0x3fe19999, 0x999999a5},			/* -0.25963=f(0.55000)*/
-{64, 0,123,__LINE__, 0xbfd01daf, 0xf72ff974, 0x3fe1eb85, 0x1eb851f7},			/* -0.25181=f(0.56000)*/
-{64, 0,123,__LINE__, 0xbfcf3f7e, 0x23824b5f, 0x3fe23d70, 0xa3d70a49},			/* -0.24412=f(0.57000)*/
-{64, 0,123,__LINE__, 0xbfce47fd, 0xd365ec8f, 0x3fe28f5c, 0x28f5c29b},			/* -0.23657=f(0.58000)*/
-{64, 0,123,__LINE__, 0xbfcd54b8, 0xa5f8786e, 0x3fe2e147, 0xae147aed},			/* -0.22914=f(0.59000)*/
-{64, 0,123,__LINE__, 0xbfcc658a, 0x32215fe6, 0x3fe33333, 0x3333333f},			/* -0.22184=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbfcb7a4f, 0xdd072061, 0x3fe3851e, 0xb851eb91},			/* -0.21467=f(0.61000)*/
-{64, 0,123,__LINE__, 0xbfca92e8, 0xbbfdccaf, 0x3fe3d70a, 0x3d70a3e3},			/* -0.20760=f(0.62000)*/
-{64, 0,123,__LINE__, 0xbfc9af35, 0x78dd76ee, 0x3fe428f5, 0xc28f5c35},			/* -0.20065=f(0.63000)*/
-{64, 0,123,__LINE__, 0xbfc8cf18, 0x388647ec, 0x3fe47ae1, 0x47ae1487},			/* -0.19382=f(0.64000)*/
-{64, 0,123,__LINE__, 0xbfc7f274, 0x835e6163, 0x3fe4cccc, 0xccccccd9},			/* -0.18708=f(0.65000)*/
-{64, 0,123,__LINE__, 0xbfc7192f, 0x2f9b3474, 0x3fe51eb8, 0x51eb852b},			/* -0.18045=f(0.66000)*/
-{64, 0,123,__LINE__, 0xbfc6432e, 0x4d2cd670, 0x3fe570a3, 0xd70a3d7d},			/* -0.17392=f(0.67000)*/
-{64, 0,123,__LINE__, 0xbfc57059, 0x13262b2a, 0x3fe5c28f, 0x5c28f5cf},			/* -0.16749=f(0.68000)*/
-{64, 0,123,__LINE__, 0xbfc4a097, 0xce8087ed, 0x3fe6147a, 0xe147ae21},			/* -0.16115=f(0.69000)*/
-{64, 0,123,__LINE__, 0xbfc3d3d3, 0xd21ccee4, 0x3fe66666, 0x66666673},			/* -0.15490=f(0.70000)*/
-{64, 0,123,__LINE__, 0xbfc309f7, 0x67e6fd47, 0x3fe6b851, 0xeb851ec5},			/* -0.14874=f(0.71000)*/
-{64, 0,123,__LINE__, 0xbfc242ed, 0xc303cbf3, 0x3fe70a3d, 0x70a3d717},			/* -0.14266=f(0.72000)*/
-{64, 0,123,__LINE__, 0xbfc17ea2, 0xf2f25cc1, 0x3fe75c28, 0xf5c28f69},			/* -0.13667=f(0.73000)*/
-{64, 0,123,__LINE__, 0xbfc0bd03, 0xd78e07e3, 0x3fe7ae14, 0x7ae147bb},			/* -0.13076=f(0.74000)*/
-{64, 0,123,__LINE__, 0xbfbffbfc, 0x2bbc77c7, 0x3fe80000, 0x0000000d},			/* -0.12493=f(0.75000)*/
-{64, 0,123,__LINE__, 0xbfbe8300, 0x1b481ec5, 0x3fe851eb, 0x851eb85f},			/* -0.11918=f(0.76000)*/
-{64, 0,123,__LINE__, 0xbfbd0ef1, 0x9f2d46e2, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.11350=f(0.77000)*/
-{64, 0,123,__LINE__, 0xbfbb9fb0, 0x28819ae1, 0x3fe8f5c2, 0x8f5c2903},			/* -0.10790=f(0.78000)*/
-{64, 0,123,__LINE__, 0xbfba351c, 0x66e768e3, 0x3fe947ae, 0x147ae155},			/* -0.10237=f(0.79000)*/
-{64, 0,123,__LINE__, 0xbfb8cf18, 0x388647d2, 0x3fe99999, 0x999999a7},			/* -0.09691=f(0.80000)*/
-{64, 0,123,__LINE__, 0xbfb76d86, 0x9b029ff6, 0x3fe9eb85, 0x1eb851f9},			/* -0.09151=f(0.81000)*/
-{64, 0,123,__LINE__, 0xbfb6104b, 0x9d615247, 0x3fea3d70, 0xa3d70a4b},			/* -0.08618=f(0.82000)*/
-{64, 0,123,__LINE__, 0xbfb4b74c, 0x52c6523b, 0x3fea8f5c, 0x28f5c29d},			/* -0.08092=f(0.83000)*/
-{64, 0,123,__LINE__, 0xbfb3626e, 0xc5fe75e2, 0x3feae147, 0xae147aef},			/* -0.07572=f(0.84000)*/
-{64, 0,123,__LINE__, 0xbfb21199, 0xedc60e51, 0x3feb3333, 0x33333341},			/* -0.07058=f(0.85000)*/
-{64, 0,123,__LINE__, 0xbfb0c4b5, 0xa1bf0874, 0x3feb851e, 0xb851eb93},			/* -0.06550=f(0.86000)*/
-{60, 0,123,__LINE__, 0xbfaef755, 0x2014d266, 0x3febd70a, 0x3d70a3e5},			/* -0.06048=f(0.87000)*/
-{64, 0,123,__LINE__, 0xbfac6cc4, 0x66f3e1d9, 0x3fec28f5, 0xc28f5c37},			/* -0.05551=f(0.88000)*/
-{64, 0,123,__LINE__, 0xbfa9e98d, 0x949f2ad4, 0x3fec7ae1, 0x47ae1489},			/* -0.05060=f(0.89000)*/
-{64, 0,123,__LINE__, 0xbfa76d86, 0x9b029fc1, 0x3feccccc, 0xccccccdb},			/* -0.04575=f(0.90000)*/
-{64, 0,123,__LINE__, 0xbfa4f886, 0xd0f0f1ba, 0x3fed1eb8, 0x51eb852d},			/* -0.04095=f(0.91000)*/
-{64, 0,123,__LINE__, 0xbfa28a66, 0xe2892fbe, 0x3fed70a3, 0xd70a3d7f},			/* -0.03621=f(0.92000)*/
-{64, 0,123,__LINE__, 0xbfa02300, 0xc27452e7, 0x3fedc28f, 0x5c28f5d1},			/* -0.03151=f(0.93000)*/
-{64, 0,123,__LINE__, 0xbf9b845f, 0x37d9b7cb, 0x3fee147a, 0xe147ae23},			/* -0.02687=f(0.94000)*/
-{64, 0,123,__LINE__, 0xbf96cf9f, 0x8b075afd, 0x3fee6666, 0x66666675},			/* -0.02227=f(0.95000)*/
-{64, 0,123,__LINE__, 0xbf92277d, 0x692c7faf, 0x3feeb851, 0xeb851ec7},			/* -0.01772=f(0.96000)*/
-{64, 0,123,__LINE__, 0xbf8b176b, 0xc5ac9724, 0x3fef0a3d, 0x70a3d719},			/* -0.01322=f(0.97000)*/
-{64, 0,123,__LINE__, 0xbf81f810, 0x2faa9ee8, 0x3fef5c28, 0xf5c28f6b},			/* -0.00877=f(0.98000)*/
-{64, 0,123,__LINE__, 0xbf71e0d4, 0x874f8fa9, 0x3fefae14, 0x7ae147bd},			/* -0.00436=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3cc8520b, 0xb2820866, 0x3ff00000, 0x00000007},			/* 6.75029e-16=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3f71b349, 0xf11fb8c1, 0x3ff028f5, 0xc28f5c30},			/* 0.00432=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3f819cf7, 0x83a8cc9b, 0x3ff051eb, 0x851eb859},			/* 0.00860=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3f8a4a67, 0x223dafef, 0x3ff07ae1, 0x47ae1482},			/* 0.01283=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3f917130, 0x0ceb745a, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.01703=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3f95b2a5, 0xca1f4885, 0x3ff0cccc, 0xccccccd4},			/* 0.02118=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3f99e9c7, 0xded6318d, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.02530=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3f9e16c7, 0xf0c37ea6, 0x3ff11eb8, 0x51eb8526},			/* 0.02938=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fa11ceb, 0x2173b005, 0x3ff147ae, 0x147ae14f},			/* 0.03342=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fa32990, 0xe1514d45, 0x3ff170a3, 0xd70a3d78},			/* 0.03742=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fa5316c, 0x0a18ae2f, 0x3ff19999, 0x999999a1},			/* 0.04139=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fa73492, 0xcf4ac047, 0x3ff1c28f, 0x5c28f5ca},			/* 0.04532=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fa9331a, 0xcb7c042d, 0x3ff1eb85, 0x1eb851f3},			/* 0.04921=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fab2d19, 0x05c48b3c, 0x3ff2147a, 0xe147ae1c},			/* 0.05307=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fad22a1, 0xf6f2a24b, 0x3ff23d70, 0xa3d70a45},			/* 0.05690=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3faf13c9, 0x8e83604b, 0x3ff26666, 0x6666666e},			/* 0.06069=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fb08051, 0x9bb20ec5, 0x3ff28f5c, 0x28f5c297},			/* 0.06445=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fb174a0, 0xee3fd50a, 0x3ff2b851, 0xeb851ec0},			/* 0.06818=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fb266db, 0xf68cf707, 0x3ff2e147, 0xae147ae9},			/* 0.07188=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fb3570b, 0xb07e3b99, 0x3ff30a3d, 0x70a3d712},			/* 0.07554=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3fc91a74, 0xc4f85378, 0x3ff921fb, 0x54442d18},			/* 0.19611=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3fdfd14d, 0xb31ba3bb, 0x400921fb, 0x54442d18},			/* 0.49714=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3fe58b30, 0xfc65ffdc, 0x4012d97c, 0x7f3321d2},			/* 0.67324=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfcc658a, 0x322160d5, 0x3fe33333, 0x333332ec},			/* -0.22184=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fd7268c, 0x826fe5e1, 0x40026666, 0x66666654},			/* 0.36172=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3fe34413, 0x509f79f7, 0x400fffff, 0xffffffee},			/* 0.60205=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3fe83020, 0x771f6d1a, 0x4016cccc, 0xccccccc4},			/* 0.75587=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3febd0bf, 0x0a1c7dfb, 0x401d9999, 0x99999991},			/* 0.86923=f(7.40000)*/
-{64, 0,123,__LINE__, 0x3feeb077, 0x92f0f0da, 0x40223333, 0x3333332f},			/* 0.95904=f(9.10000)*/
-{64, 0,123,__LINE__, 0x3ff088e7, 0x590b9d7b, 0x40259999, 0x99999995},			/* 1.03342=f(10.8000)*/
-{64, 0,123,__LINE__, 0x3ff18cf1, 0x8388647f, 0x4028ffff, 0xfffffffb},			/* 1.09691=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3ff26fc5, 0xe72afed2, 0x402c6666, 0x66666661},			/* 1.15228=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3ff338ec, 0x30e76fc1, 0x402fcccc, 0xccccccc7},			/* 1.20139=f(15.9000)*/
-{64, 0,123,__LINE__, 0x3ff3ed9e, 0xb0f03f6c, 0x40319999, 0x99999997},			/* 1.24551=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3ff491a4, 0x8a75278a, 0x40334ccc, 0xccccccca},			/* 1.28555=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3ff527cf, 0x6b505b9e, 0x4034ffff, 0xfffffffd},			/* 1.32221=f(21.0000)*/
-{64, 0,123,__LINE__, 0x3ff5b248, 0x2b52cc18, 0x4036b333, 0x33333330},			/* 1.35602=f(22.7000)*/
-{64, 0,123,__LINE__, 0x3ff632bf, 0xacaed8ee, 0x40386666, 0x66666663},			/* 1.38739=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3ff6aa8f, 0x3c934ee8, 0x403a1999, 0x99999996},			/* 1.41664=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3ff71ace, 0xb746d587, 0x403bcccc, 0xccccccc9},			/* 1.44404=f(27.8000)*/
-{64, 0,123,__LINE__, 0x3ff78464, 0x1719126d, 0x403d7fff, 0xfffffffc},			/* 1.46982=f(29.5000)*/
-0,};
-test_log10(m)   {run_vector_1(m,log10_vec,(char *)(log10),"log10","dd");   }	
diff --git a/newlib/libm/test/log10f_vec.c b/newlib/libm/test/log10f_vec.c
deleted file mode 100644
index 034117c05..000000000
--- a/newlib/libm/test/log10f_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type log10f_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 0, 0,123,__LINE__, 0xc02e05a6, 0x2c79c242, 0x3cd19000, 0x00000000},			/* -15.0110=f(9.74915e-16)*/
-{13, 0,123,__LINE__, 0xc0000000, 0x0214fad3, 0x3f847ae1, 0x47ae16ad},			/* -2.00000=f(0.01000)*/
-{ 1, 0,123,__LINE__, 0xbffb2efb, 0x30021727, 0x3f947ae1, 0x47ae1594},			/* -1.69897=f(0.02000)*/
-{ 1, 0,123,__LINE__, 0xbff85db6, 0x1cb7bfcf, 0x3f9eb851, 0xeb851fd2},			/* -1.52287=f(0.03000)*/
-{ 1, 0,123,__LINE__, 0xbff65df6, 0x5bda38a7, 0x3fa47ae1, 0x47ae1508},			/* -1.39794=f(0.04000)*/
-{ 1, 0,123,__LINE__, 0xbff4d104, 0xd2017a0d, 0x3fa99999, 0x99999a27},			/* -1.30103=f(0.05000)*/
-{ 1, 0,123,__LINE__, 0xbff38cb1, 0x488fe14f, 0x3faeb851, 0xeb851f46},			/* -1.22184=f(0.06000)*/
-{ 1, 0,123,__LINE__, 0xbff27a7a, 0x79197291, 0x3fb1eb85, 0x1eb85232},			/* -1.15490=f(0.07000)*/
-{ 1, 0,123,__LINE__, 0xbff18cf1, 0x87b25a27, 0x3fb47ae1, 0x47ae14c1},			/* -1.09691=f(0.08000)*/
-{ 1, 0,123,__LINE__, 0xbff0bb6c, 0x300f62e3, 0x3fb70a3d, 0x70a3d750},			/* -1.04575=f(0.09000)*/
-{ 1, 0,123,__LINE__, 0xbfefffff, 0xfbb3371b, 0x3fb99999, 0x999999df},			/* -1.00000=f(0.10000)*/
-{ 1, 0,123,__LINE__, 0xbfeeace9, 0x3e2d1922, 0x3fbc28f5, 0xc28f5c6e},			/* -0.95860=f(0.11000)*/
-{ 1, 0,123,__LINE__, 0xbfed7758, 0xe8d0059f, 0x3fbeb851, 0xeb851efd},			/* -0.92081=f(0.12000)*/
-{ 1, 0,123,__LINE__, 0xbfec5a93, 0x813be142, 0x3fc0a3d7, 0x0a3d70c6},			/* -0.88605=f(0.13000)*/
-{ 1, 0,123,__LINE__, 0xbfeb52eb, 0x49e32823, 0x3fc1eb85, 0x1eb8520e},			/* -0.85387=f(0.14000)*/
-{ 1, 0,123,__LINE__, 0xbfea5d75, 0xd4acd895, 0x3fc33333, 0x33333356},			/* -0.82390=f(0.15000)*/
-{ 1, 0,123,__LINE__, 0xbfe977d9, 0x6714f750, 0x3fc47ae1, 0x47ae149e},			/* -0.79588=f(0.16000)*/
-{ 1, 0,123,__LINE__, 0xbfe8a029, 0x988741da, 0x3fc5c28f, 0x5c28f5e6},			/* -0.76955=f(0.17000)*/
-{ 1, 0,123,__LINE__, 0xbfe7d4ce, 0xb7cf08c7, 0x3fc70a3d, 0x70a3d72e},			/* -0.74472=f(0.18000)*/
-{ 1, 0,123,__LINE__, 0xbfe71473, 0x57aa23b9, 0x3fc851eb, 0x851eb876},			/* -0.72124=f(0.19000)*/
-{ 1, 0,123,__LINE__, 0xbfe65df6, 0x53637a1c, 0x3fc99999, 0x999999be},			/* -0.69897=f(0.20000)*/
-{ 1, 0,123,__LINE__, 0xbfe5b061, 0x313436fd, 0x3fcae147, 0xae147b06},			/* -0.67778=f(0.21000)*/
-{ 1, 0,123,__LINE__, 0xbfe50adf, 0x95dd5c23, 0x3fcc28f5, 0xc28f5c4e},			/* -0.65757=f(0.22000)*/
-{ 1, 0,123,__LINE__, 0xbfe46cb9, 0xb9618521, 0x3fcd70a3, 0xd70a3d96},			/* -0.63827=f(0.23000)*/
-{ 1, 0,123,__LINE__, 0xbfe3d54f, 0x408048a0, 0x3fceb851, 0xeb851ede},			/* -0.61978=f(0.24000)*/
-{ 1, 0,123,__LINE__, 0xbfe34413, 0x509f79ff, 0x3fd00000, 0x00000013},			/* -0.60206=f(0.25000)*/
-{ 1, 0,123,__LINE__, 0xbfe2b889, 0xd8ec2443, 0x3fd0a3d7, 0x0a3d70b7},			/* -0.58502=f(0.26000)*/
-{ 1, 0,123,__LINE__, 0xbfe23244, 0x944219a4, 0x3fd147ae, 0x147ae15b},			/* -0.56863=f(0.27000)*/
-{ 1, 0,123,__LINE__, 0xbfe1b0e1, 0xa1936b23, 0x3fd1eb85, 0x1eb851ff},			/* -0.55284=f(0.28000)*/
-{ 1, 0,123,__LINE__, 0xbfe13409, 0x206bd4c1, 0x3fd28f5c, 0x28f5c2a3},			/* -0.53760=f(0.29000)*/
-{ 1, 0,123,__LINE__, 0xbfe0bb6c, 0x2c5d1b95, 0x3fd33333, 0x33333347},			/* -0.52287=f(0.30000)*/
-{ 1, 0,123,__LINE__, 0xbfe046c3, 0xd86b6be6, 0x3fd3d70a, 0x3d70a3eb},			/* -0.50863=f(0.31000)*/
-{ 1, 0,123,__LINE__, 0xbfdfab9f, 0x7d8a74a0, 0x3fd47ae1, 0x47ae148f},			/* -0.49485=f(0.32000)*/
-{ 1, 0,123,__LINE__, 0xbfded0aa, 0xddadfb38, 0x3fd51eb8, 0x51eb8533},			/* -0.48148=f(0.33000)*/
-{ 1, 0,123,__LINE__, 0xbfddfc3f, 0xe06f09b4, 0x3fd5c28f, 0x5c28f5d7},			/* -0.46852=f(0.34000)*/
-{ 1, 0,123,__LINE__, 0xbfdd2dfd, 0x4491b4d1, 0x3fd66666, 0x6666667b},			/* -0.45593=f(0.35000)*/
-{ 1, 0,123,__LINE__, 0xbfdc658a, 0x1efe9791, 0x3fd70a3d, 0x70a3d71f},			/* -0.44369=f(0.36000)*/
-{ 1, 0,123,__LINE__, 0xbfdba295, 0x376350ca, 0x3fd7ae14, 0x7ae147c3},			/* -0.43179=f(0.37000)*/
-{ 1, 0,123,__LINE__, 0xbfdae4d3, 0x5eb4cd74, 0x3fd851eb, 0x851eb867},			/* -0.42021=f(0.38000)*/
-{ 1, 0,123,__LINE__, 0xbfda2bff, 0x6ba1c9ed, 0x3fd8f5c2, 0x8f5c290b},			/* -0.40893=f(0.39000)*/
-{ 1, 0,123,__LINE__, 0xbfd977d9, 0x56277a39, 0x3fd99999, 0x999999af},			/* -0.39794=f(0.40000)*/
-{ 1, 0,123,__LINE__, 0xbfd8c826, 0x3e8468cc, 0x3fda3d70, 0xa3d70a53},			/* -0.38721=f(0.41000)*/
-{ 1, 0,123,__LINE__, 0xbfd81caf, 0x11c8f3fc, 0x3fdae147, 0xae147af7},			/* -0.37675=f(0.42000)*/
-{ 1, 0,123,__LINE__, 0xbfd77540, 0xb38886a3, 0x3fdb851e, 0xb851eb9b},			/* -0.36653=f(0.43000)*/
-{ 1, 0,123,__LINE__, 0xbfd6d1ab, 0xdb1b3e47, 0x3fdc28f5, 0xc28f5c3f},			/* -0.35654=f(0.44000)*/
-{ 1, 0,123,__LINE__, 0xbfd631c4, 0x2e4f33a6, 0x3fdccccc, 0xcccccce3},			/* -0.34678=f(0.45000)*/
-{ 1, 0,123,__LINE__, 0xbfd59560, 0x22239043, 0x3fdd70a3, 0xd70a3d87},			/* -0.33724=f(0.46000)*/
-{ 1, 0,123,__LINE__, 0xbfd4fc59, 0x43beb17c, 0x3fde147a, 0xe147ae2b},			/* -0.32790=f(0.47000)*/
-{ 1, 0,123,__LINE__, 0xbfd4668b, 0x30611741, 0x3fdeb851, 0xeb851ecf},			/* -0.31875=f(0.48000)*/
-{ 1, 0,123,__LINE__, 0xbfd3d3d3, 0xc982eada, 0x3fdf5c28, 0xf5c28f73},			/* -0.30980=f(0.49000)*/
-{ 1, 0,123,__LINE__, 0xbfd34413, 0x509f79ff, 0x3fe00000, 0x0000000b},			/* -0.30103=f(0.50000)*/
-{ 1, 0,123,__LINE__, 0xbfd2b72b, 0x9db1fa7d, 0x3fe051eb, 0x851eb85d},			/* -0.29242=f(0.51000)*/
-{ 1, 0,123,__LINE__, 0xbfd22d00, 0x6138ce88, 0x3fe0a3d7, 0x0a3d70af},			/* -0.28399=f(0.52000)*/
-{ 1, 0,123,__LINE__, 0xbfd1a576, 0xec9e8e93, 0x3fe0f5c2, 0x8f5c2901},			/* -0.27572=f(0.53000)*/
-{ 1, 0,123,__LINE__, 0xbfd12075, 0xd7e4b949, 0x3fe147ae, 0x147ae153},			/* -0.26760=f(0.54000)*/
-{ 1, 0,123,__LINE__, 0xbfd09de5, 0xc434111f, 0x3fe19999, 0x999999a5},			/* -0.25963=f(0.55000)*/
-{ 1, 0,123,__LINE__, 0xbfd01daf, 0xf2875c47, 0x3fe1eb85, 0x1eb851f7},			/* -0.25181=f(0.56000)*/
-{ 1, 0,123,__LINE__, 0xbfcf3f7e, 0x215020cf, 0x3fe23d70, 0xa3d70a49},			/* -0.24412=f(0.57000)*/
-{ 1, 0,123,__LINE__, 0xbfce47fd, 0xe0705f08, 0x3fe28f5c, 0x28f5c29b},			/* -0.23657=f(0.58000)*/
-{ 1, 0,123,__LINE__, 0xbfcd54b8, 0xcedabb0f, 0x3fe2e147, 0xae147aed},			/* -0.22914=f(0.59000)*/
-{ 1, 0,123,__LINE__, 0xbfcc658a, 0x10357a58, 0x3fe33333, 0x3333333f},			/* -0.22184=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0xbfcb7a4f, 0xd26858a5, 0x3fe3851e, 0xb851eb91},			/* -0.21467=f(0.61000)*/
-{ 1, 0,123,__LINE__, 0xbfca92e8, 0xc06ebb99, 0x3fe3d70a, 0x3d70a3e3},			/* -0.20760=f(0.62000)*/
-{ 1, 0,123,__LINE__, 0xbfc9af35, 0x87786ddd, 0x3fe428f5, 0xc28f5c35},			/* -0.20065=f(0.63000)*/
-{ 1, 0,123,__LINE__, 0xbfc8cf18, 0x59d5f543, 0x3fe47ae1, 0x47ae1487},			/* -0.19382=f(0.64000)*/
-{ 1, 0,123,__LINE__, 0xbfc7f274, 0x9b962186, 0x3fe4cccc, 0xccccccd9},			/* -0.18708=f(0.65000)*/
-{ 1, 0,123,__LINE__, 0xbfc7192f, 0x1a1d0273, 0x3fe51eb8, 0x51eb852b},			/* -0.18045=f(0.66000)*/
-{ 1, 0,123,__LINE__, 0xbfc6432e, 0x43bade15, 0x3fe570a3, 0xd70a3d7d},			/* -0.17392=f(0.67000)*/
-{ 1, 0,123,__LINE__, 0xbfc57059, 0x1f9f1f6b, 0x3fe5c28f, 0x5c28f5cf},			/* -0.16749=f(0.68000)*/
-{ 1, 0,123,__LINE__, 0xbfc4a097, 0xe6b77b5c, 0x3fe6147a, 0xe147ae21},			/* -0.16115=f(0.69000)*/
-{ 1, 0,123,__LINE__, 0xbfc3d3d3, 0xe7e475a4, 0x3fe66666, 0x66666673},			/* -0.15490=f(0.70000)*/
-{ 1, 0,123,__LINE__, 0xbfc309f7, 0x6df4a518, 0x3fe6b851, 0xeb851ec5},			/* -0.14874=f(0.71000)*/
-{ 1, 0,123,__LINE__, 0xbfc242ed, 0x9cbe3b23, 0x3fe70a3d, 0x70a3d717},			/* -0.14266=f(0.72000)*/
-{ 1, 0,123,__LINE__, 0xbfc17ea2, 0xeaf56c43, 0x3fe75c28, 0xf5c28f69},			/* -0.13667=f(0.73000)*/
-{ 1, 0,123,__LINE__, 0xbfc0bd03, 0xcd87ad97, 0x3fe7ae14, 0x7ae147bb},			/* -0.13076=f(0.74000)*/
-{ 1, 0,123,__LINE__, 0xbfbffbfc, 0x456f68a7, 0x3fe80000, 0x0000000d},			/* -0.12493=f(0.75000)*/
-{ 1, 0,123,__LINE__, 0xbfbe8300, 0x38554dd7, 0x3fe851eb, 0x851eb85f},			/* -0.11918=f(0.76000)*/
-{ 1, 0,123,__LINE__, 0xbfbd0ef1, 0xcb59ff20, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.11350=f(0.77000)*/
-{ 1, 0,123,__LINE__, 0xbfbb9fb0, 0x6c093fb8, 0x3fe8f5c2, 0x8f5c2903},			/* -0.10790=f(0.78000)*/
-{ 1, 0,123,__LINE__, 0xbfba351c, 0x4a7f306b, 0x3fe947ae, 0x147ae155},			/* -0.10237=f(0.79000)*/
-{ 1, 0,123,__LINE__, 0xbfb8cf18, 0x162000ea, 0x3fe99999, 0x999999a7},			/* -0.09691=f(0.80000)*/
-{ 1, 0,123,__LINE__, 0xbfb76d86, 0x9a1b5bfa, 0x3fe9eb85, 0x1eb851f9},			/* -0.09151=f(0.81000)*/
-{ 1, 0,123,__LINE__, 0xbfb6104b, 0xb793bb35, 0x3fea3d70, 0xa3d70a4b},			/* -0.08618=f(0.82000)*/
-{ 1, 0,123,__LINE__, 0xbfb4b74c, 0x8169e21d, 0x3fea8f5c, 0x28f5c29d},			/* -0.08092=f(0.83000)*/
-{ 1, 0,123,__LINE__, 0xbfb3626f, 0x04a5e7f4, 0x3feae147, 0xae147aef},			/* -0.07572=f(0.84000)*/
-{ 1, 0,123,__LINE__, 0xbfb21199, 0xbd7dd04e, 0x3feb3333, 0x33333341},			/* -0.07058=f(0.85000)*/
-{ 1, 0,123,__LINE__, 0xbfb0c4b5, 0x8ba43292, 0x3feb851e, 0xb851eb93},			/* -0.06550=f(0.86000)*/
-{ 1, 0,123,__LINE__, 0xbfaef755, 0x18769125, 0x3febd70a, 0x3d70a3e5},			/* -0.06048=f(0.87000)*/
-{ 1, 0,123,__LINE__, 0xbfac6cc4, 0x53de2240, 0x3fec28f5, 0xc28f5c37},			/* -0.05551=f(0.88000)*/
-{ 1, 0,123,__LINE__, 0xbfa9e98d, 0xcabcb3bd, 0x3fec7ae1, 0x47ae1489},			/* -0.05060=f(0.89000)*/
-{ 1, 0,123,__LINE__, 0xbfa76d86, 0xed7dcd39, 0x3feccccc, 0xccccccdb},			/* -0.04575=f(0.90000)*/
-{ 1, 0,123,__LINE__, 0xbfa4f886, 0x5e4b4038, 0x3fed1eb8, 0x51eb852d},			/* -0.04095=f(0.91000)*/
-{ 1, 0,123,__LINE__, 0xbfa28a66, 0x8c20b224, 0x3fed70a3, 0xd70a3d7f},			/* -0.03621=f(0.92000)*/
-{ 1, 0,123,__LINE__, 0xbfa02300, 0xb43b7e7e, 0x3fedc28f, 0x5c28f5d1},			/* -0.03151=f(0.93000)*/
-{ 1, 0,123,__LINE__, 0xbf9b845f, 0x31f377dc, 0x3fee147a, 0xe147ae23},			/* -0.02687=f(0.94000)*/
-{ 1, 0,123,__LINE__, 0xbf96cf9f, 0xe2105135, 0x3fee6666, 0x66666675},			/* -0.02227=f(0.95000)*/
-{ 1, 0,123,__LINE__, 0xbf92277d, 0xfc19d425, 0x3feeb851, 0xeb851ec7},			/* -0.01772=f(0.96000)*/
-{ 1, 0,123,__LINE__, 0xbf8b176a, 0x16d2ba27, 0x3fef0a3d, 0x70a3d719},			/* -0.01322=f(0.97000)*/
-{ 1, 0,123,__LINE__, 0xbf81f80f, 0x1c6e1b65, 0x3fef5c28, 0xf5c28f6b},			/* -0.00877=f(0.98000)*/
-{ 1, 0,123,__LINE__, 0xbf71e0d3, 0x72b85936, 0x3fefae14, 0x7ae147bd},			/* -0.00436=f(0.99000)*/
-{ 0, 0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 0.00000=f(1.00000)*/
-{ 0, 0,123,__LINE__, 0x3f71b348, 0xd010f4f7, 0x3ff028f5, 0xc28f5c30},			/* 0.00432=f(1.01000)*/
-{ 0, 0,123,__LINE__, 0x3f819cf6, 0x5daff043, 0x3ff051eb, 0x851eb859},			/* 0.00860=f(1.02000)*/
-{ 0, 0,123,__LINE__, 0x3f8a4a65, 0x7e10a246, 0x3ff07ae1, 0x47ae1482},			/* 0.01283=f(1.03000)*/
-{ 0, 0,123,__LINE__, 0x3f91712e, 0xf66ab768, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.01703=f(1.04000)*/
-{ 0, 0,123,__LINE__, 0x3f95b2a4, 0x61b3deee, 0x3ff0cccc, 0xccccccd4},			/* 0.02118=f(1.05000)*/
-{ 0, 0,123,__LINE__, 0x3f99e9c6, 0x400eb6b4, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.02530=f(1.06000)*/
-{ 0, 0,123,__LINE__, 0x3f9e16c9, 0x719263f9, 0x3ff11eb8, 0x51eb8526},			/* 0.02938=f(1.07000)*/
-{ 0, 0,123,__LINE__, 0x3fa11ceb, 0xc5d605b0, 0x3ff147ae, 0x147ae14f},			/* 0.03342=f(1.08000)*/
-{ 0, 0,123,__LINE__, 0x3fa32991, 0x3ffe6b76, 0x3ff170a3, 0xd70a3d78},			/* 0.03742=f(1.09000)*/
-{ 0, 0,123,__LINE__, 0x3fa5316c, 0x635b46fd, 0x3ff19999, 0x999999a1},			/* 0.04139=f(1.10000)*/
-{ 0, 0,123,__LINE__, 0x3fa73492, 0xe6e4c0cc, 0x3ff1c28f, 0x5c28f5ca},			/* 0.04532=f(1.11000)*/
-{ 0, 0,123,__LINE__, 0x3fa9331a, 0xf0c0edbc, 0x3ff1eb85, 0x1eb851f3},			/* 0.04921=f(1.12000)*/
-{ 0, 0,123,__LINE__, 0x3fab2d18, 0xce92b643, 0x3ff2147a, 0xe147ae1c},			/* 0.05307=f(1.13000)*/
-{ 0, 0,123,__LINE__, 0x3fad22a1, 0xffbb4cbb, 0x3ff23d70, 0xa3d70a45},			/* 0.05690=f(1.14000)*/
-{ 0, 0,123,__LINE__, 0x3faf13c9, 0x4cbcde70, 0x3ff26666, 0x6666666e},			/* 0.06069=f(1.15000)*/
-{ 0, 0,123,__LINE__, 0x3fb08051, 0x819d29eb, 0x3ff28f5c, 0x28f5c297},			/* 0.06445=f(1.16000)*/
-{ 0, 0,123,__LINE__, 0x3fb174a0, 0x9492be52, 0x3ff2b851, 0xeb851ec0},			/* 0.06818=f(1.17000)*/
-{ 0, 0,123,__LINE__, 0x3fb266db, 0xa4c871dc, 0x3ff2e147, 0xae147ae9},			/* 0.07188=f(1.18000)*/
-{ 0, 0,123,__LINE__, 0x3fb3570c, 0x08999da5, 0x3ff30a3d, 0x70a3d712},			/* 0.07554=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{ 9,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0x3fc91a74, 0xe7f747ef, 0x3ff921fb, 0x54442d18},			/* 0.19611=f(1.57079)*/
-{10, 0,123,__LINE__, 0x3fdfd14d, 0xc49b1df6, 0x400921fb, 0x54442d18},			/* 0.49714=f(3.14159)*/
-{ 1, 0,123,__LINE__, 0x3fe58b30, 0xfb6e2ff7, 0x4012d97c, 0x7f3321d2},			/* 0.67324=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0xbfcc658a, 0x10357a58, 0x3fe33333, 0x333332ec},			/* -0.22184=f(0.60000)*/
-{10, 0,123,__LINE__, 0x3fd7268c, 0x7a3715cd, 0x40026666, 0x66666654},			/* 0.36172=f(2.30000)*/
-{ 1, 0,123,__LINE__, 0x3fe34413, 0x509f79ff, 0x400fffff, 0xffffffee},			/* 0.60206=f(4.00000)*/
-{ 1, 0,123,__LINE__, 0x3fe83020, 0x6f740fae, 0x4016cccc, 0xccccccc4},			/* 0.75587=f(5.70000)*/
-{ 1, 0,123,__LINE__, 0x3febd0bf, 0x0bcabb18, 0x401d9999, 0x99999991},			/* 0.86923=f(7.40000)*/
-{ 1, 0,123,__LINE__, 0x3feeb077, 0x9e7e198e, 0x40223333, 0x3333332f},			/* 0.95904=f(9.10000)*/
-{ 1, 0,123,__LINE__, 0x3ff088e7, 0x5c084bbb, 0x40259999, 0x99999995},			/* 1.03342=f(10.8000)*/
-{ 1, 0,123,__LINE__, 0x3ff18cf1, 0x827c3313, 0x4028ffff, 0xfffffffb},			/* 1.09691=f(12.5000)*/
-{ 1, 0,123,__LINE__, 0x3ff26fc5, 0xe5ff9d1c, 0x402c6666, 0x66666661},			/* 1.15228=f(14.2000)*/
-{ 1, 0,123,__LINE__, 0x3ff338ec, 0x2e1ab0cd, 0x402fcccc, 0xccccccc7},			/* 1.20139=f(15.9000)*/
-{ 1, 0,123,__LINE__, 0x3ff3ed9e, 0xb3ba5437, 0x40319999, 0x99999997},			/* 1.24551=f(17.6000)*/
-{ 1, 0,123,__LINE__, 0x3ff491a4, 0x858fbbe4, 0x40334ccc, 0xccccccca},			/* 1.28555=f(19.3000)*/
-{ 1, 0,123,__LINE__, 0x3ff527cf, 0x6a0bfa62, 0x4034ffff, 0xfffffffd},			/* 1.32221=f(21.0000)*/
-{ 1, 0,123,__LINE__, 0x3ff5b248, 0x2f4b06cc, 0x4036b333, 0x33333330},			/* 1.35602=f(22.7000)*/
-{ 1, 0,123,__LINE__, 0x3ff632bf, 0xa9e6bddc, 0x40386666, 0x66666663},			/* 1.38739=f(24.4000)*/
-{ 1, 0,123,__LINE__, 0x3ff6aa8f, 0x3c881cdc, 0x403a1999, 0x99999996},			/* 1.41664=f(26.1000)*/
-{ 1, 0,123,__LINE__, 0x3ff71ace, 0xb43ddb6b, 0x403bcccc, 0xccccccc9},			/* 1.44404=f(27.8000)*/
-{ 1, 0,123,__LINE__, 0x3ff78464, 0x17051b9e, 0x403d7fff, 0xfffffffc},			/* 1.46982=f(29.5000)*/
-0,};
-test_log10f(m)   {run_vector_1(m,log10f_vec,(char *)(log10f),"log10f","ff");   }	
diff --git a/newlib/libm/test/log1p_vec.c b/newlib/libm/test/log1p_vec.c
deleted file mode 100644
index 9966b8637..000000000
--- a/newlib/libm/test/log1p_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type log1p_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfffffffe, 0xbfefffff, 0xfffffffe},			/* -0.01000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfefae14, 0x7ae147ac, 0xbfefae14, 0x7ae147ac},			/* -0.99000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfef5c28, 0xf5c28f5a, 0xbfef5c28, 0xf5c28f5a},			/* -0.98000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfef0a3d, 0x70a3d708, 0xbfef0a3d, 0x70a3d708},			/* -0.97000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfeeb851, 0xeb851eb6, 0xbfeeb851, 0xeb851eb6},			/* -0.96000=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfee6666, 0x66666664, 0xbfee6666, 0x66666664},			/* -0.95000=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfee147a, 0xe147ae12, 0xbfee147a, 0xe147ae12},			/* -0.94000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfedc28f, 0x5c28f5c0, 0xbfedc28f, 0x5c28f5c0},			/* -0.93000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfed70a3, 0xd70a3d6e, 0xbfed70a3, 0xd70a3d6e},			/* -0.92000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfed1eb8, 0x51eb851c, 0xbfed1eb8, 0x51eb851c},			/* -0.91000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfeccccc, 0xccccccca, 0xbfeccccc, 0xccccccca},			/* -0.90000=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfec7ae1, 0x47ae1478, 0xbfec7ae1, 0x47ae1478},			/* -0.89000=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfec28f5, 0xc28f5c26, 0xbfec28f5, 0xc28f5c26},			/* -0.88000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfebd70a, 0x3d70a3d4, 0xbfebd70a, 0x3d70a3d4},			/* -0.87000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfeb851e, 0xb851eb82, 0xbfeb851e, 0xb851eb82},			/* -0.86000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfeb3333, 0x33333330, 0xbfeb3333, 0x33333330},			/* -0.85000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfeae147, 0xae147ade, 0xbfeae147, 0xae147ade},			/* -0.84000=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfea8f5c, 0x28f5c28c, 0xbfea8f5c, 0x28f5c28c},			/* -0.83000=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfea3d70, 0xa3d70a3a, 0xbfea3d70, 0xa3d70a3a},			/* -0.82000=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe9eb85, 0x1eb851e8, 0xbfe9eb85, 0x1eb851e8},			/* -0.81000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfe99999, 0x99999996, 0xbfe99999, 0x99999996},			/* -0.80000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe947ae, 0x147ae144, 0xbfe947ae, 0x147ae144},			/* -0.79000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe8f5c2, 0x8f5c28f2, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.78000=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe8a3d7, 0x0a3d70a0, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.77000=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfe851eb, 0x851eb84e, 0xbfe851eb, 0x851eb84e},			/* -0.76000=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe7ffff, 0xfffffffc, 0xbfe7ffff, 0xfffffffc},			/* -0.75000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe7ae14, 0x7ae147aa, 0xbfe7ae14, 0x7ae147aa},			/* -0.74000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe75c28, 0xf5c28f58, 0xbfe75c28, 0xf5c28f58},			/* -0.73000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe70a3d, 0x70a3d706, 0xbfe70a3d, 0x70a3d706},			/* -0.72000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe6b851, 0xeb851eb4, 0xbfe6b851, 0xeb851eb4},			/* -0.71000=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe66666, 0x66666662, 0xbfe66666, 0x66666662},			/* -0.70000=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe6147a, 0xe147ae10, 0xbfe6147a, 0xe147ae10},			/* -0.69000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe5c28f, 0x5c28f5be, 0xbfe5c28f, 0x5c28f5be},			/* -0.68000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe570a3, 0xd70a3d6c, 0xbfe570a3, 0xd70a3d6c},			/* -0.67000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe51eb8, 0x51eb851a, 0xbfe51eb8, 0x51eb851a},			/* -0.66000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe4cccc, 0xccccccc8, 0xbfe4cccc, 0xccccccc8},			/* -0.65000=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe47ae1, 0x47ae1476, 0xbfe47ae1, 0x47ae1476},			/* -0.64000=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe428f5, 0xc28f5c24, 0xbfe428f5, 0xc28f5c24},			/* -0.63000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe3d70a, 0x3d70a3d2, 0xbfe3d70a, 0x3d70a3d2},			/* -0.62000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe3851e, 0xb851eb80, 0xbfe3851e, 0xb851eb80},			/* -0.61000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe33333, 0x3333332e, 0xbfe33333, 0x3333332e},			/* -0.60000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe2e147, 0xae147adc, 0xbfe2e147, 0xae147adc},			/* -0.59000=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe28f5c, 0x28f5c28a, 0xbfe28f5c, 0x28f5c28a},			/* -0.58000=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe23d70, 0xa3d70a38, 0xbfe23d70, 0xa3d70a38},			/* -0.57000=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe1eb85, 0x1eb851e6, 0xbfe1eb85, 0x1eb851e6},			/* -0.56000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe19999, 0x99999994, 0xbfe19999, 0x99999994},			/* -0.55000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe147ae, 0x147ae142, 0xbfe147ae, 0x147ae142},			/* -0.54000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe0f5c2, 0x8f5c28f0, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.53000=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe0a3d7, 0x0a3d709e, 0xbfe0a3d7, 0x0a3d709e},			/* -0.52000=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe051eb, 0x851eb84c, 0xbfe051eb, 0x851eb84c},			/* -0.51000=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfdfffff, 0xfffffff4, 0xbfdfffff, 0xfffffff4},			/* -0.50000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfdf5c28, 0xf5c28f50, 0xbfdf5c28, 0xf5c28f50},			/* -0.49000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdeb851, 0xeb851eac, 0xbfdeb851, 0xeb851eac},			/* -0.48000=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfde147a, 0xe147ae08, 0xbfde147a, 0xe147ae08},			/* -0.47000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdd70a3, 0xd70a3d64, 0xbfdd70a3, 0xd70a3d64},			/* -0.46000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdccccc, 0xccccccc0, 0xbfdccccc, 0xccccccc0},			/* -0.45000=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdc28f5, 0xc28f5c1c, 0xbfdc28f5, 0xc28f5c1c},			/* -0.44000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdb851e, 0xb851eb78, 0xbfdb851e, 0xb851eb78},			/* -0.43000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdae147, 0xae147ad4, 0xbfdae147, 0xae147ad4},			/* -0.42000=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfda3d70, 0xa3d70a30, 0xbfda3d70, 0xa3d70a30},			/* -0.41000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd99999, 0x9999998c, 0xbfd99999, 0x9999998c},			/* -0.40000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd8f5c2, 0x8f5c28e8, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.39000=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd851eb, 0x851eb844, 0xbfd851eb, 0x851eb844},			/* -0.38000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd7ae14, 0x7ae147a0, 0xbfd7ae14, 0x7ae147a0},			/* -0.37000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd70a3d, 0x70a3d6fc, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd66666, 0x66666658, 0xbfd66666, 0x66666658},			/* -0.35000=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd5c28f, 0x5c28f5b4, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd51eb8, 0x51eb8510, 0xbfd51eb8, 0x51eb8510},			/* -0.33000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd47ae1, 0x47ae146c, 0xbfd47ae1, 0x47ae146c},			/* -0.32000=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd3d70a, 0x3d70a3c8, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd33333, 0x33333324, 0xbfd33333, 0x33333324},			/* -0.30000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd28f5c, 0x28f5c280, 0xbfd28f5c, 0x28f5c280},			/* -0.29000=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd1eb85, 0x1eb851dc, 0xbfd1eb85, 0x1eb851dc},			/* -0.28000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd147ae, 0x147ae138, 0xbfd147ae, 0x147ae138},			/* -0.27000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd0a3d7, 0x0a3d7094, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26000=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfcfffff, 0xffffffe0, 0xbfcfffff, 0xffffffe0},			/* -0.25000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfceb851, 0xeb851e98, 0xbfceb851, 0xeb851e98},			/* -0.24000=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcd70a3, 0xd70a3d50, 0xbfcd70a3, 0xd70a3d50},			/* -0.23000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcc28f5, 0xc28f5c08, 0xbfcc28f5, 0xc28f5c08},			/* -0.22000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcae147, 0xae147ac0, 0xbfcae147, 0xae147ac0},			/* -0.21000=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc99999, 0x99999978, 0xbfc99999, 0x99999978},			/* -0.20000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc851eb, 0x851eb830, 0xbfc851eb, 0x851eb830},			/* -0.19000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc70a3d, 0x70a3d6e8, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5c28f, 0x5c28f5a0, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc47ae1, 0x47ae1458, 0xbfc47ae1, 0x47ae1458},			/* -0.16000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc33333, 0x33333310, 0xbfc33333, 0x33333310},			/* -0.15000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1eb85, 0x1eb851c8, 0xbfc1eb85, 0x1eb851c8},			/* -0.14000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0a3d7, 0x0a3d7080, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbeb851, 0xeb851e71, 0xbfbeb851, 0xeb851e71},			/* -0.12000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc28f5, 0xc28f5be2, 0xbfbc28f5, 0xc28f5be2},			/* -0.11000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb99999, 0x99999953, 0xbfb99999, 0x99999953},			/* -0.00100=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb70a3d, 0x70a3d6c4, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb47ae1, 0x47ae1435, 0xbfb47ae1, 0x47ae1435},			/* -0.08000=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1eb85, 0x1eb851a6, 0xbfb1eb85, 0x1eb851a6},			/* -0.07000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeb851, 0xeb851e2d, 0xbfaeb851, 0xeb851e2d},			/* -0.06000=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99999, 0x9999990e, 0xbfa99999, 0x9999990e},			/* -0.05000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47ae1, 0x47ae13ef, 0xbfa47ae1, 0x47ae13ef},			/* -0.04000=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb851, 0xeb851da0, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947ae1, 0x47ae1362, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847ae1, 0x47ae1249, 0xbf847ae1, 0x47ae1249},			/* -0.00010=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd18fff, 0xfffffffe, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f8460d6, 0xccca38a3, 0x3f847ae1, 0x47ae16ad},			/* 0.00995=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f944723, 0xd272a905, 0x3f947ae1, 0x47ae1594},			/* 0.01980=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9e44a9, 0xa3bed775, 0x3f9eb851, 0xeb851fd2},			/* 0.02955=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa414bc, 0xc0a366e0, 0x3fa47ae1, 0x47ae1508},			/* 0.03922=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa8fb06, 0x3ef2c870, 0x3fa99999, 0x99999a27},			/* 0.04879=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3fadd56c, 0x1d883f65, 0x3faeb851, 0xeb851f46},			/* 0.05826=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb15213, 0xc27c91be, 0x3fb1eb85, 0x1eb85232},			/* 0.06765=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb3b3b8, 0x02beebd0, 0x3fb47ae1, 0x47ae14c1},			/* 0.07696=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb60fbd, 0xd2fffc71, 0x3fb70a3d, 0x70a3d750},			/* 0.08617=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb8663f, 0x793c4706, 0x3fb99999, 0x999999df},			/* 0.09531=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbab756, 0x84d3e32e, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10436=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbd031b, 0xd5179e39, 0x3fbeb851, 0xeb851efd},			/* 0.11332=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fbf49a7, 0x9f8b91ca, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12221=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc0c588, 0xbaf19047, 0x3fc1eb85, 0x1eb8520e},			/* 0.13102=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc1e3b8, 0x25dd060a, 0x3fc33333, 0x33333356},			/* 0.13976=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc2ff6d, 0x3e070ed3, 0x3fc47ae1, 0x47ae149e},			/* 0.14842=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc418b2, 0xe73e5327, 0x3fc5c28f, 0x5c28f5e6},			/* 0.15700=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc52f93, 0xbe237442, 0x3fc70a3d, 0x70a3d72e},			/* 0.16551=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc6441a, 0x1a9027c6, 0x3fc851eb, 0x851eb876},			/* 0.17395=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc75650, 0x11e49695, 0x3fc99999, 0x999999be},			/* 0.18232=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fc8663f, 0x793c46e5, 0x3fcae147, 0xae147b06},			/* 0.19062=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fc973f1, 0xe78bc6c7, 0x3fcc28f5, 0xc28f5c4e},			/* 0.19885=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fca7f70, 0xb7a83a9e, 0x3fcd70a3, 0xd70a3d96},			/* 0.20701=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fcb88c5, 0x0a39e287, 0x3fceb851, 0xeb851ede},			/* 0.21511=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fcc8ff7, 0xc79a9a40, 0x3fd00000, 0x00000013},			/* 0.22314=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fcd9511, 0xa1a1488f, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.23111=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fce981b, 0x155b25b1, 0x3fd147ae, 0x147ae15b},			/* 0.23901=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fcf991c, 0x6cb3b398, 0x3fd1eb85, 0x1eb851ff},			/* 0.24686=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd04c0e, 0xe0061b6a, 0x3fd28f5c, 0x28f5c2a3},			/* 0.25464=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd0ca93, 0x7be1b9eb, 0x3fd33333, 0x33333347},			/* 0.26236=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd1481f, 0xe6d734de, 0x3fd3d70a, 0x3d70a3eb},			/* 0.27002=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd1c4b7, 0xe7415cfc, 0x3fd47ae1, 0x47ae148f},			/* 0.27763=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd2405f, 0x2d99b178, 0x3fd51eb8, 0x51eb8533},			/* 0.28517=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd2bb19, 0x5520356c, 0x3fd5c28f, 0x5c28f5d7},			/* 0.29266=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd334e9, 0xe47d0804, 0x3fd66666, 0x6666667b},			/* 0.30010=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd3add4, 0x4e5c0621, 0x3fd70a3d, 0x70a3d71f},			/* 0.30748=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd425db, 0xf202b884, 0x3fd7ae14, 0x7ae147c3},			/* 0.31481=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd49d04, 0x1be0ce40, 0x3fd851eb, 0x851eb867},			/* 0.32208=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd51350, 0x061b5fdc, 0x3fd8f5c2, 0x8f5c290b},			/* 0.32930=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd588c2, 0xd913349f, 0x3fd99999, 0x999999af},			/* 0.33647=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fd5fd5f, 0xabe64094, 0x3fda3d70, 0xa3d70a53},			/* 0.34358=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fd67129, 0x84ec8f25, 0x3fdae147, 0xae147af7},			/* 0.35065=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fd6e423, 0x5a30cb9d, 0x3fdb851e, 0xb851eb9b},			/* 0.35767=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fd75650, 0x11e49686, 0x3fdc28f5, 0xc28f5c3f},			/* 0.36464=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fd7c7b2, 0x82d0d47b, 0x3fdccccc, 0xcccccce3},			/* 0.37156=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fd8384d, 0x74c220f9, 0x3fdd70a3, 0xd70a3d87},			/* 0.37843=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fd8a823, 0xa0f18d9c, 0x3fde147a, 0xe147ae2b},			/* 0.38526=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fd91737, 0xb269d45e, 0x3fdeb851, 0xeb851ecf},			/* 0.39204=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fd9858c, 0x46692186, 0x3fdf5c28, 0xf5c28f73},			/* 0.39877=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fd9f323, 0xecbf985b, 0x3fe00000, 0x0000000b},			/* 0.40546=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fda6001, 0x282ab3e7, 0x3fe051eb, 0x851eb85d},			/* 0.41210=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fdacc26, 0x6eada3b5, 0x3fe0a3d7, 0x0a3d70af},			/* 0.41871=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fdb3796, 0x29e6c2da, 0x3fe0f5c2, 0x8f5c2901},			/* 0.42526=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fdba252, 0xb7624650, 0x3fe147ae, 0x147ae153},			/* 0.43178=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fdc0c5e, 0x68ea3e54, 0x3fe19999, 0x999999a5},			/* 0.43825=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fdc75bb, 0x84d40526, 0x3fe1eb85, 0x1eb851f7},			/* 0.44468=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fdcde6c, 0x464b347d, 0x3fe23d70, 0xa3d70a49},			/* 0.45107=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fdd4672, 0xdd9a39c5, 0x3fe28f5c, 0x28f5c29b},			/* 0.45742=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fddadd1, 0x7070a036, 0x3fe2e147, 0xae147aed},			/* 0.46373=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fde148a, 0x1a2726dc, 0x3fe33333, 0x3333333f},			/* 0.47000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fde7a9e, 0xec01b794, 0x3fe3851e, 0xb851eb91},			/* 0.47623=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fdee011, 0xed6f533e, 0x3fe3d70a, 0x3d70a3e3},			/* 0.48242=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fdf44e5, 0x1c480666, 0x3fe428f5, 0xc28f5c35},			/* 0.48858=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fdfa91a, 0x6d08f8e1, 0x3fe47ae1, 0x47ae1487},			/* 0.49469=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe00659, 0xe5875506, 0x3fe4cccc, 0xccccccd9},			/* 0.50077=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe037d9, 0x8c66b558, 0x3fe51eb8, 0x51eb852b},			/* 0.50681=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe0690d, 0x18041250, 0x3fe570a3, 0xd70a3d7d},			/* 0.51282=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe099f5, 0x7102bfed, 0x3fe5c28f, 0x5c28f5cf},			/* 0.51879=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe0ca93, 0x7be1b9e3, 0x3fe6147a, 0xe147ae21},			/* 0.52472=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe0fae8, 0x1914a998, 0x3fe66666, 0x66666673},			/* 0.53062=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe12af4, 0x251c3038, 0x3fe6b851, 0xeb851ec5},			/* 0.53649=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe15ab8, 0x789d7b7e, 0x3fe70a3d, 0x70a3d717},			/* 0.54232=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe18a35, 0xe8792b90, 0x3fe75c28, 0xf5c28f69},			/* 0.54812=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe1b96d, 0x45e18fdb, 0x3fe7ae14, 0x7ae147bb},			/* 0.55388=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe1e85f, 0x5e7040d8, 0x3fe80000, 0x0000000d},			/* 0.55961=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe2170c, 0xfc3b1c47, 0x3fe851eb, 0x851eb85f},			/* 0.56531=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe24576, 0xe5e8a936, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.57097=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe2739d, 0xdec3e8fc, 0x3fe8f5c2, 0x8f5c2903},			/* 0.57661=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe2a182, 0xa6cf9a1c, 0x3fe947ae, 0x147ae155},			/* 0.58221=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe2cf25, 0xfad8f1cb, 0x3fe99999, 0x999999a7},			/* 0.58778=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe2fc88, 0x9489d0b0, 0x3fe9eb85, 0x1eb851f9},			/* 0.59332=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe329ab, 0x2a7a773d, 0x3fea3d70, 0xa3d70a4b},			/* 0.59883=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe3568e, 0x7042bdd8, 0x3fea8f5c, 0x28f5c29d},			/* 0.60431=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe38333, 0x168ad4e9, 0x3feae147, 0xae147aef},			/* 0.60976=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe3af99, 0xcb1b90b7, 0x3feb3333, 0x33333341},			/* 0.61518=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe3dbc3, 0x38ee44c8, 0x3feb851e, 0xb851eb93},			/* 0.62057=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe407b0, 0x083c3272, 0x3febd70a, 0x3d70a3e5},			/* 0.62593=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe43360, 0xde8d8e13, 0x3fec28f5, 0xc28f5c37},			/* 0.63127=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe45ed6, 0x5ec81e4a, 0x3fec7ae1, 0x47ae1489},			/* 0.63657=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe48a11, 0x293d7863, 0x3feccccc, 0xccccccdb},			/* 0.64185=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe4b511, 0xdbb8dd2b, 0x3fed1eb8, 0x51eb852d},			/* 0.64710=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe4dfd9, 0x118cb90c, 0x3fed70a3, 0xd70a3d7f},			/* 0.65232=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe50a67, 0x639fca6b, 0x3fedc28f, 0x5c28f5d1},			/* 0.65752=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fe534bd, 0x6879f10b, 0x3fee147a, 0xe147ae23},			/* 0.66268=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fe55edb, 0xb450a91b, 0x3fee6666, 0x66666675},			/* 0.66782=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fe588c2, 0xd9133497, 0x3feeb851, 0xeb851ec7},			/* 0.67294=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fe5b273, 0x66767564, 0x3fef0a3d, 0x70a3d719},			/* 0.67803=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fe5dbed, 0xea007aa4, 0x3fef5c28, 0xf5c28f6b},			/* 0.68309=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fe60532, 0xef13c38d, 0x3fefae14, 0x7ae147bd},			/* 0.68813=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fe62e42, 0xfefa39f6, 0x3ff00000, 0x00000007},			/* 0.69314=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3fe6571e, 0xa0efe6db, 0x3ff028f5, 0xc28f5c30},			/* 0.69813=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fe67fc6, 0x5a2d62d0, 0x3ff051eb, 0x851eb859},			/* 0.70309=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3fe6a83a, 0xadf20485, 0x3ff07ae1, 0x47ae1482},			/* 0.70803=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fe6d07c, 0x1d8dcf36, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.71294=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fe6f88b, 0x286b22f8, 0x3ff0cccc, 0xccccccd4},			/* 0.71783=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fe72068, 0x4c1830a9, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.72270=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fe74814, 0x04503345, 0x3ff11eb8, 0x51eb8526},			/* 0.72754=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fe76f8e, 0xcb04705c, 0x3ff147ae, 0x147ae14f},			/* 0.73236=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fe796d9, 0x1865013c, 0x3ff170a3, 0xd70a3d78},			/* 0.73716=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fe7bdf3, 0x62e96675, 0x3ff19999, 0x999999a1},			/* 0.74193=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fe7e4de, 0x1f58e732, 0x3ff1c28f, 0x5c28f5ca},			/* 0.74668=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fe80b99, 0xc0d2bde4, 0x3ff1eb85, 0x1eb851f3},			/* 0.75141=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fe83226, 0xb8d613b8, 0x3ff2147a, 0xe147ae1c},			/* 0.75612=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fe85885, 0x7749cc26, 0x3ff23d70, 0xa3d70a45},			/* 0.76080=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fe87eb6, 0x6a842206, 0x3ff26666, 0x6666666e},			/* 0.76546=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fe8a4b9, 0xff521768, 0x3ff28f5c, 0x28f5c297},			/* 0.77010=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fe8ca90, 0xa0feb971, 0x3ff2b851, 0xeb851ec0},			/* 0.77472=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fe8f03a, 0xb95a397c, 0x3ff2e147, 0xae147ae9},			/* 0.77932=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fe915b8, 0xb0c0dca2, 0x3ff30a3d, 0x70a3d712},			/* 0.78390=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3fee3703, 0xdb0ab11a, 0x3ff921fb, 0x54442d18},			/* 0.94421=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ff6bcbe, 0xd09f00af, 0x400921fb, 0x54442d18},			/* 1.42108=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3ffbe1d7, 0xac0bdb86, 0x4012d97c, 0x7f3321d2},			/* 1.74263=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fde148a, 0x1a272674, 0x3fe33333, 0x333332ec},			/* 0.47000=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff31a4e, 0x7240c76c, 0x40026666, 0x66666654},			/* 1.19392=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3ff9c041, 0xf7ed8d2c, 0x400fffff, 0xffffffee},			/* 1.60943=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3ffe6f08, 0x4d359a85, 0x4016cccc, 0xccccccc4},			/* 1.90210=f(5.70000)*/
-{64, 0,123,__LINE__, 0x4001069e, 0x58377691, 0x401d9999, 0x99999991},			/* 2.12823=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40028012, 0x92821f4a, 0x40223333, 0x3333332f},			/* 2.31253=f(9.10000)*/
-{64, 0,123,__LINE__, 0x4003beaa, 0xf7978c56, 0x40259999, 0x99999995},			/* 2.46810=f(10.8000)*/
-{64, 0,123,__LINE__, 0x4004d24e, 0xf844f613, 0x4028ffff, 0xfffffffb},			/* 2.60269=f(12.5000)*/
-{64, 0,123,__LINE__, 0x4005c536, 0x898b0989, 0x402c6666, 0x66666661},			/* 2.72129=f(14.2000)*/
-{64, 0,123,__LINE__, 0x40069e56, 0x9aadc38b, 0x402fcccc, 0xccccccc7},			/* 2.82731=f(15.9000)*/
-{64, 0,123,__LINE__, 0x400762a2, 0x89f0e644, 0x40319999, 0x99999997},			/* 2.92316=f(17.6000)*/
-{64, 0,123,__LINE__, 0x400815c0, 0x6731d634, 0x40334ccc, 0xccccccca},			/* 3.01062=f(19.3000)*/
-{64, 0,123,__LINE__, 0x4008ba74, 0x773dc5c6, 0x4034ffff, 0xfffffffd},			/* 3.09104=f(21.0000)*/
-{64, 0,123,__LINE__, 0x400952e4, 0x95008f55, 0x4036b333, 0x33333330},			/* 3.16547=f(22.7000)*/
-{64, 0,123,__LINE__, 0x4009e0c4, 0x2cc995e9, 0x40386666, 0x66666663},			/* 3.23474=f(24.4000)*/
-{64, 0,123,__LINE__, 0x400a6571, 0xf06a8af5, 0x403a1999, 0x99999996},			/* 3.29953=f(26.1000)*/
-{64, 0,123,__LINE__, 0x400ae20c, 0x7db0765f, 0x403bcccc, 0xccccccc9},			/* 3.36037=f(27.8000)*/
-{64, 0,123,__LINE__, 0x400b5781, 0x1666499d, 0x403d7fff, 0xfffffffc},			/* 3.41772=f(29.5000)*/
-0,};
-test_log1p(m)   {run_vector_1(m,log1p_vec,(char *)(log1p),"log1p","dd");   }	
diff --git a/newlib/libm/test/log1pf_vec.c b/newlib/libm/test/log1pf_vec.c
deleted file mode 100644
index 7169e0ac5..000000000
--- a/newlib/libm/test/log1pf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type log1pf_vec[] = {
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 0,15, 39,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfefae14, 0x80000000, 0xbfefae14, 0x7ae147ac},			/* -0.99000=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfef5c29, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* -0.98000=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfef0a3d, 0x80000000, 0xbfef0a3d, 0x70a3d708},			/* -0.97000=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfeeb851, 0xe0000000, 0xbfeeb851, 0xeb851eb6},			/* -0.95999=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfee6666, 0x60000000, 0xbfee6666, 0x66666664},			/* -0.94999=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfee147a, 0xe0000000, 0xbfee147a, 0xe147ae12},			/* -0.94000=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfedc28f, 0x60000000, 0xbfedc28f, 0x5c28f5c0},			/* -0.93000=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfed70a3, 0xe0000000, 0xbfed70a3, 0xd70a3d6e},			/* -0.92000=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfed1eb8, 0x60000000, 0xbfed1eb8, 0x51eb851c},			/* -0.91000=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfeccccc, 0xc0000000, 0xbfeccccc, 0xccccccca},			/* -0.89999=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfec7ae1, 0x40000000, 0xbfec7ae1, 0x47ae1478},			/* -0.88999=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfec28f5, 0xc0000000, 0xbfec28f5, 0xc28f5c26},			/* -0.88000=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfebd70a, 0x40000000, 0xbfebd70a, 0x3d70a3d4},			/* -0.87000=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfeb851e, 0xc0000000, 0xbfeb851e, 0xb851eb82},			/* -0.86000=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfeb3333, 0x40000000, 0xbfeb3333, 0x33333330},			/* -0.85000=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfeae147, 0xa0000000, 0xbfeae147, 0xae147ade},			/* -0.83999=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfea8f5c, 0x20000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.82999=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfea3d70, 0xa0000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.81999=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe9eb85, 0x20000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.81000=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfe99999, 0xa0000000, 0xbfe99999, 0x99999996},			/* -0.80000=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe947ae, 0x20000000, 0xbfe947ae, 0x147ae144},			/* -0.79000=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe8f5c2, 0x80000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.77999=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe8a3d7, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.76999=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfe851eb, 0x80000000, 0xbfe851eb, 0x851eb84e},			/* -0.75999=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe80000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* -0.75000=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe7ae14, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.74000=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe75c29, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* -0.73000=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe70a3d, 0x80000000, 0xbfe70a3d, 0x70a3d706},			/* -0.72000=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe6b851, 0xe0000000, 0xbfe6b851, 0xeb851eb4},			/* -0.70999=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe66666, 0x60000000, 0xbfe66666, 0x66666662},			/* -0.69999=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe6147a, 0xe0000000, 0xbfe6147a, 0xe147ae10},			/* -0.69000=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe5c28f, 0x60000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.68000=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe570a3, 0xe0000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.67000=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe51eb8, 0x60000000, 0xbfe51eb8, 0x51eb851a},			/* -0.66000=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe4cccc, 0xc0000000, 0xbfe4cccc, 0xccccccc8},			/* -0.64999=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe47ae1, 0x40000000, 0xbfe47ae1, 0x47ae1476},			/* -0.63999=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe428f5, 0xc0000000, 0xbfe428f5, 0xc28f5c24},			/* -0.63000=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe3d70a, 0x40000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.62000=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe3851e, 0xc0000000, 0xbfe3851e, 0xb851eb80},			/* -0.61000=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe33333, 0x40000000, 0xbfe33333, 0x3333332e},			/* -0.60000=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe2e147, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* -0.58999=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe28f5c, 0x20000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.57999=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe23d70, 0xa0000000, 0xbfe23d70, 0xa3d70a38},			/* -0.56999=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe1eb85, 0x20000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.56000=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe19999, 0xa0000000, 0xbfe19999, 0x99999994},			/* -0.55000=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe147ae, 0x20000000, 0xbfe147ae, 0x147ae142},			/* -0.54000=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe0f5c2, 0x80000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.52999=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe0a3d7, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.51999=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe051eb, 0x80000000, 0xbfe051eb, 0x851eb84c},			/* -0.50999=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfe00000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* -0.50000=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfdf5c29, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.49000=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdeb851, 0xe0000000, 0xbfdeb851, 0xeb851eac},			/* -0.47999=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfde147a, 0xe0000000, 0xbfde147a, 0xe147ae08},			/* -0.47000=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdd70a3, 0xe0000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.46000=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdccccc, 0xc0000000, 0xbfdccccc, 0xccccccc0},			/* -0.44999=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdc28f5, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.44000=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdb851e, 0xc0000000, 0xbfdb851e, 0xb851eb78},			/* -0.43000=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdae147, 0xa0000000, 0xbfdae147, 0xae147ad4},			/* -0.41999=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfda3d70, 0xa0000000, 0xbfda3d70, 0xa3d70a30},			/* -0.41000=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd99999, 0xa0000000, 0xbfd99999, 0x9999998c},			/* -0.40000=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd8f5c2, 0x80000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.38999=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd851eb, 0x80000000, 0xbfd851eb, 0x851eb844},			/* -0.38000=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd7ae14, 0x80000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.37000=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd70a3d, 0x80000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36000=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd66666, 0x60000000, 0xbfd66666, 0x66666658},			/* -0.34999=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd5c28f, 0x60000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34000=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd51eb8, 0x60000000, 0xbfd51eb8, 0x51eb8510},			/* -0.33000=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd47ae1, 0x40000000, 0xbfd47ae1, 0x47ae146c},			/* -0.31999=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd3d70a, 0x40000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31000=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd33333, 0x40000000, 0xbfd33333, 0x33333324},			/* -0.30000=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd28f5c, 0x20000000, 0xbfd28f5c, 0x28f5c280},			/* -0.28999=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd1eb85, 0x20000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.28000=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd147ae, 0x20000000, 0xbfd147ae, 0x147ae138},			/* -0.27000=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd0a3d7, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25999=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfd00000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* -0.25000=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfceb851, 0xe0000000, 0xbfceb851, 0xeb851e98},			/* -0.23999=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcd70a3, 0xe0000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.23000=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcc28f5, 0xc0000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.22000=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcae147, 0xa0000000, 0xbfcae147, 0xae147ac0},			/* -0.20999=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc99999, 0xa0000000, 0xbfc99999, 0x99999978},			/* -0.20000=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc851eb, 0x80000000, 0xbfc851eb, 0x851eb830},			/* -0.19000=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc70a3d, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18000=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5c28f, 0x60000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17000=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc47ae1, 0x40000000, 0xbfc47ae1, 0x47ae1458},			/* -0.16000=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc33333, 0x40000000, 0xbfc33333, 0x33333310},			/* -0.15000=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1eb85, 0x20000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.14000=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0a3d7, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13000=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbeb851, 0xe0000000, 0xbfbeb851, 0xeb851e71},			/* -0.12000=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc28f5, 0xc0000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.11000=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb99999, 0xa0000000, 0xbfb99999, 0x99999953},			/* -0.10000=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb70a3d, 0x80000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09000=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb47ae1, 0x40000000, 0xbfb47ae1, 0x47ae1435},			/* -0.07999=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1eb85, 0x20000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.07000=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeb851, 0xe0000000, 0xbfaeb851, 0xeb851e2d},			/* -0.05999=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99999, 0xa0000000, 0xbfa99999, 0x9999990e},			/* -0.05000=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47ae1, 0x40000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.03999=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb851, 0xe0000000, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947ae1, 0x40000000, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847ae1, 0x40000000, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{19, 0,123,__LINE__, 0x3f8460d6, 0xc0000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00995=f(0.01000)*/
-{18, 0,123,__LINE__, 0x3f944723, 0xc0000000, 0x3f947ae1, 0x47ae1594},			/* 0.01980=f(0.02000)*/
-{16, 0,123,__LINE__, 0x3f9e44a9, 0xa0000000, 0x3f9eb851, 0xeb851fd2},			/* 0.02955=f(0.03000)*/
-{17, 0,123,__LINE__, 0x3fa414bc, 0xc0000000, 0x3fa47ae1, 0x47ae1508},			/* 0.03922=f(0.04000)*/
-{15, 0,123,__LINE__, 0x3fa8fb06, 0x40000000, 0x3fa99999, 0x99999a27},			/* 0.04879=f(0.05000)*/
-{14, 0,123,__LINE__, 0x3fadd56c, 0x20000000, 0x3faeb851, 0xeb851f46},			/* 0.05826=f(0.06000)*/
-{16, 0,123,__LINE__, 0x3fb15213, 0xc0000000, 0x3fb1eb85, 0x1eb85232},			/* 0.06765=f(0.07000)*/
-{13, 0,123,__LINE__, 0x3fb3b3b8, 0x00000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.07696=f(0.08000)*/
-{15, 0,123,__LINE__, 0x3fb60fbd, 0xe0000000, 0x3fb70a3d, 0x70a3d750},			/* 0.08617=f(0.09000)*/
-{15, 0,123,__LINE__, 0x3fb8663f, 0x80000000, 0x3fb99999, 0x999999df},			/* 0.09531=f(0.10000)*/
-{13, 0,123,__LINE__, 0x3fbab756, 0x80000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10436=f(0.11000)*/
-{14, 0,123,__LINE__, 0x3fbd031b, 0xc0000000, 0x3fbeb851, 0xeb851efd},			/* 0.11332=f(0.12000)*/
-{ 9, 0,123,__LINE__, 0x3fbf49a7, 0x80000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12221=f(0.13000)*/
-{15, 0,123,__LINE__, 0x3fc0c588, 0xc0000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.13102=f(0.14000)*/
-{14, 0,123,__LINE__, 0x3fc1e3b8, 0x40000000, 0x3fc33333, 0x33333356},			/* 0.13976=f(0.15000)*/
-{13, 0,123,__LINE__, 0x3fc2ff6d, 0x40000000, 0x3fc47ae1, 0x47ae149e},			/* 0.14842=f(0.16000)*/
-{15, 0,123,__LINE__, 0x3fc418b2, 0xe0000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.15700=f(0.17000)*/
-{14, 0,123,__LINE__, 0x3fc52f93, 0xc0000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.16551=f(0.18000)*/
-{12, 0,123,__LINE__, 0x3fc6441a, 0x20000000, 0x3fc851eb, 0x851eb876},			/* 0.17395=f(0.19000)*/
-{12, 0,123,__LINE__, 0x3fc75650, 0x20000000, 0x3fc99999, 0x999999be},			/* 0.18232=f(0.20000)*/
-{14, 0,123,__LINE__, 0x3fc8663f, 0x60000000, 0x3fcae147, 0xae147b06},			/* 0.19062=f(0.21000)*/
-{13, 0,123,__LINE__, 0x3fc973f1, 0xe0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.19885=f(0.22000)*/
-{13, 0,123,__LINE__, 0x3fca7f70, 0xc0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.20701=f(0.23000)*/
-{13, 0,123,__LINE__, 0x3fcb88c5, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 0.21511=f(0.24000)*/
-{14, 0,123,__LINE__, 0x3fcc8ff7, 0xc0000000, 0x3fd00000, 0x00000013},			/* 0.22314=f(0.25000)*/
-{11, 0,123,__LINE__, 0x3fcd9511, 0x80000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.23111=f(0.26000)*/
-{11, 0,123,__LINE__, 0x3fce981b, 0x20000000, 0x3fd147ae, 0x147ae15b},			/* 0.23901=f(0.27000)*/
-{11, 0,123,__LINE__, 0x3fcf991c, 0x60000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.24686=f(0.28000)*/
-{14, 0,123,__LINE__, 0x3fd04c0e, 0xe0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.25464=f(0.29000)*/
-{14, 0,123,__LINE__, 0x3fd0ca93, 0x80000000, 0x3fd33333, 0x33333347},			/* 0.26236=f(0.30000)*/
-{14, 0,123,__LINE__, 0x3fd1481f, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.27002=f(0.31000)*/
-{13, 0,123,__LINE__, 0x3fd1c4b7, 0xe0000000, 0x3fd47ae1, 0x47ae148f},			/* 0.27763=f(0.32000)*/
-{13, 0,123,__LINE__, 0x3fd2405f, 0x40000000, 0x3fd51eb8, 0x51eb8533},			/* 0.28517=f(0.33000)*/
-{13, 0,123,__LINE__, 0x3fd2bb19, 0x60000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.29266=f(0.34000)*/
-{13, 0,123,__LINE__, 0x3fd334e9, 0xe0000000, 0x3fd66666, 0x6666667b},			/* 0.30010=f(0.35000)*/
-{13, 0,123,__LINE__, 0x3fd3add4, 0x60000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.30748=f(0.36000)*/
-{14, 0,123,__LINE__, 0x3fd425dc, 0x00000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.31481=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fd49d04, 0x20000000, 0x3fd851eb, 0x851eb867},			/* 0.32208=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3fd51350, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.32930=f(0.39000)*/
-{12, 0,123,__LINE__, 0x3fd588c2, 0xe0000000, 0x3fd99999, 0x999999af},			/* 0.33647=f(0.40000)*/
-{12, 0,123,__LINE__, 0x3fd5fd5f, 0xa0000000, 0x3fda3d70, 0xa3d70a53},			/* 0.34358=f(0.41000)*/
-{12, 0,123,__LINE__, 0x3fd67129, 0x7dc00000, 0x3fdae147, 0xae147af7},			/* 0.35065=f(0.42000)*/
-{12, 0,123,__LINE__, 0x3fd6e423, 0x5dc00000, 0x3fdb851e, 0xb851eb9b},			/* 0.35767=f(0.43000)*/
-{12, 0,123,__LINE__, 0x3fd75650, 0x1dc00000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.36464=f(0.44000)*/
-{12, 0,123,__LINE__, 0x3fd7c7b2, 0x7dc00000, 0x3fdccccc, 0xcccccce3},			/* 0.37156=f(0.45000)*/
-{13, 0,123,__LINE__, 0x3fd8384d, 0x7dc00000, 0x3fdd70a3, 0xd70a3d87},			/* 0.37843=f(0.46000)*/
-{13, 0,123,__LINE__, 0x3fd8a823, 0x9dc00000, 0x3fde147a, 0xe147ae2b},			/* 0.38526=f(0.47000)*/
-{13, 0,123,__LINE__, 0x3fd91737, 0x9dc00000, 0x3fdeb851, 0xeb851ecf},			/* 0.39204=f(0.48000)*/
-{13, 0,123,__LINE__, 0x3fd9858c, 0x5dc00000, 0x3fdf5c28, 0xf5c28f73},			/* 0.39877=f(0.49000)*/
-{13, 0,123,__LINE__, 0x3fd9f323, 0xddc00000, 0x3fe00000, 0x0000000b},			/* 0.40546=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fda6001, 0x1dc00000, 0x3fe051eb, 0x851eb85d},			/* 0.41210=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fdacc26, 0x5dc00000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.41871=f(0.52000)*/
-{10, 0,123,__LINE__, 0x3fdb3796, 0x1dc00000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.42526=f(0.53000)*/
-{10, 0,123,__LINE__, 0x3fdba252, 0xbdc00000, 0x3fe147ae, 0x147ae153},			/* 0.43178=f(0.54000)*/
-{10, 0,123,__LINE__, 0x3fdc0c5e, 0x7dc00000, 0x3fe19999, 0x999999a5},			/* 0.43825=f(0.55000)*/
-{10, 0,123,__LINE__, 0x3fdc75bb, 0x8dc00000, 0x3fe1eb85, 0x1eb851f7},			/* 0.44468=f(0.56000)*/
-{10, 0,123,__LINE__, 0x3fdcde6c, 0x3dc00000, 0x3fe23d70, 0xa3d70a49},			/* 0.45107=f(0.57000)*/
-{10, 0,123,__LINE__, 0x3fdd4672, 0xcdc00000, 0x3fe28f5c, 0x28f5c29b},			/* 0.45742=f(0.58000)*/
-{10, 0,123,__LINE__, 0x3fddadd1, 0x5dc00000, 0x3fe2e147, 0xae147aed},			/* 0.46373=f(0.59000)*/
-{10, 0,123,__LINE__, 0x3fde148a, 0x2dc00000, 0x3fe33333, 0x3333333f},			/* 0.47000=f(0.60000)*/
-{10, 0,123,__LINE__, 0x3fde7a9e, 0xfdc00000, 0x3fe3851e, 0xb851eb91},			/* 0.47623=f(0.61000)*/
-{10, 0,123,__LINE__, 0x3fdee011, 0xedc00000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.48242=f(0.62000)*/
-{10, 0,123,__LINE__, 0x3fdf44e5, 0x1dc00000, 0x3fe428f5, 0xc28f5c35},			/* 0.48858=f(0.63000)*/
-{10, 0,123,__LINE__, 0x3fdfa91a, 0x5dc00000, 0x3fe47ae1, 0x47ae1487},			/* 0.49469=f(0.64000)*/
-{13, 0,123,__LINE__, 0x3fe00659, 0xdee00000, 0x3fe4cccc, 0xccccccd9},			/* 0.50077=f(0.65000)*/
-{13, 0,123,__LINE__, 0x3fe037d9, 0x96e00000, 0x3fe51eb8, 0x51eb852b},			/* 0.50681=f(0.66000)*/
-{13, 0,123,__LINE__, 0x3fe0690d, 0x1ee00000, 0x3fe570a3, 0xd70a3d7d},			/* 0.51282=f(0.67000)*/
-{13, 0,123,__LINE__, 0x3fe099f5, 0x76e00000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.51879=f(0.68000)*/
-{13, 0,123,__LINE__, 0x3fe0ca93, 0x7ee00000, 0x3fe6147a, 0xe147ae21},			/* 0.52472=f(0.69000)*/
-{13, 0,123,__LINE__, 0x3fe0fae8, 0x16e00000, 0x3fe66666, 0x66666673},			/* 0.53062=f(0.70000)*/
-{13, 0,123,__LINE__, 0x3fe12af4, 0x1ee00000, 0x3fe6b851, 0xeb851ec5},			/* 0.53649=f(0.71000)*/
-{13, 0,123,__LINE__, 0x3fe15ab8, 0x7ee00000, 0x3fe70a3d, 0x70a3d717},			/* 0.54232=f(0.72000)*/
-{13, 0,123,__LINE__, 0x3fe18a35, 0xeee00000, 0x3fe75c28, 0xf5c28f69},			/* 0.54812=f(0.73000)*/
-{13, 0,123,__LINE__, 0x3fe1b96d, 0x46e00000, 0x3fe7ae14, 0x7ae147bb},			/* 0.55388=f(0.74000)*/
-{13, 0,123,__LINE__, 0x3fe1e85f, 0x5ee00000, 0x3fe80000, 0x0000000d},			/* 0.55961=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe2170c, 0xf6e00000, 0x3fe851eb, 0x851eb85f},			/* 0.56531=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe24576, 0xdee00000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.57097=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe2739d, 0xd6e00000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.57661=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe2a182, 0xaee00000, 0x3fe947ae, 0x147ae155},			/* 0.58221=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe2cf25, 0xfee00000, 0x3fe99999, 0x999999a7},			/* 0.58778=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe2fc88, 0x96e00000, 0x3fe9eb85, 0x1eb851f9},			/* 0.59332=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3fe329ab, 0x26e00000, 0x3fea3d70, 0xa3d70a4b},			/* 0.59883=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3fe3568e, 0x6ae00000, 0x3fea8f5c, 0x28f5c29d},			/* 0.60431=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3fe38333, 0x0ee00000, 0x3feae147, 0xae147aef},			/* 0.60976=f(0.84000)*/
-{12, 0,123,__LINE__, 0x3fe3af99, 0xd2e00000, 0x3feb3333, 0x33333341},			/* 0.61518=f(0.85000)*/
-{12, 0,123,__LINE__, 0x3fe3dbc3, 0x3ee00000, 0x3feb851e, 0xb851eb93},			/* 0.62057=f(0.86000)*/
-{12, 0,123,__LINE__, 0x3fe407b0, 0x0ae00000, 0x3febd70a, 0x3d70a3e5},			/* 0.62593=f(0.87000)*/
-{12, 0,123,__LINE__, 0x3fe43360, 0xdce00000, 0x3fec28f5, 0xc28f5c37},			/* 0.63127=f(0.88000)*/
-{12, 0,123,__LINE__, 0x3fe45ed6, 0x5ae00000, 0x3fec7ae1, 0x47ae1489},			/* 0.63657=f(0.89000)*/
-{12, 0,123,__LINE__, 0x3fe48a11, 0x22e00000, 0x3feccccc, 0xccccccdb},			/* 0.64185=f(0.90000)*/
-{12, 0,123,__LINE__, 0x3fe4b511, 0xe2e00000, 0x3fed1eb8, 0x51eb852d},			/* 0.64710=f(0.91000)*/
-{12, 0,123,__LINE__, 0x3fe4dfd9, 0x16e00000, 0x3fed70a3, 0xd70a3d7f},			/* 0.65232=f(0.92000)*/
-{12, 0,123,__LINE__, 0x3fe50a67, 0x64e00000, 0x3fedc28f, 0x5c28f5d1},			/* 0.65752=f(0.93000)*/
-{12, 0,123,__LINE__, 0x3fe534bd, 0x67e00000, 0x3fee147a, 0xe147ae23},			/* 0.66268=f(0.94000)*/
-{12, 0,123,__LINE__, 0x3fe55edb, 0xb0e00000, 0x3fee6666, 0x66666675},			/* 0.66782=f(0.95000)*/
-{12, 0,123,__LINE__, 0x3fe588c2, 0xd2e00000, 0x3feeb851, 0xeb851ec7},			/* 0.67294=f(0.96000)*/
-{12, 0,123,__LINE__, 0x3fe5b273, 0x6e600000, 0x3fef0a3d, 0x70a3d719},			/* 0.67803=f(0.97000)*/
-{12, 0,123,__LINE__, 0x3fe5dbed, 0xef600000, 0x3fef5c28, 0xf5c28f6b},			/* 0.68309=f(0.98000)*/
-{12, 0,123,__LINE__, 0x3fe60532, 0xf1a00000, 0x3fefae14, 0x7ae147bd},			/* 0.68813=f(0.99000)*/
-{12, 0,123,__LINE__, 0x3fe62e42, 0xfefa39ef, 0x3ff00000, 0x00000007},			/* 0.69314=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fe6571e, 0x9e600000, 0x3ff028f5, 0xc28f5c30},			/* 0.69813=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3fe67fc6, 0x54e00000, 0x3ff051eb, 0x851eb859},			/* 0.70309=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fe6a83a, 0xa6600000, 0x3ff07ae1, 0x47ae1482},			/* 0.70803=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fe6d07c, 0x13e00000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.71294=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3fe6f88b, 0x1be00000, 0x3ff0cccc, 0xccccccd4},			/* 0.71783=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3fe72068, 0x3ce00000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.72270=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fe74814, 0x12e00000, 0x3ff11eb8, 0x51eb8526},			/* 0.72754=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fe76f8e, 0xd6e00000, 0x3ff147ae, 0x147ae14f},			/* 0.73236=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fe796d9, 0x20e00000, 0x3ff170a3, 0xd70a3d78},			/* 0.73716=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fe7bdf3, 0x68e00000, 0x3ff19999, 0x999999a1},			/* 0.74193=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3fe7e4de, 0x22e00000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.74668=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3fe80b99, 0xc2e00000, 0x3ff1eb85, 0x1eb851f3},			/* 0.75141=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fe83226, 0xb6e00000, 0x3ff2147a, 0xe147ae1c},			/* 0.75612=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fe85885, 0x72e00000, 0x3ff23d70, 0xa3d70a45},			/* 0.76080=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fe87eb6, 0x62e00000, 0x3ff26666, 0x6666666e},			/* 0.76546=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fe8a4b9, 0xf6e00000, 0x3ff28f5c, 0x28f5c297},			/* 0.77010=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fe8ca90, 0x96e00000, 0x3ff2b851, 0xeb851ec0},			/* 0.77472=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3fe8f03a, 0xaae00000, 0x3ff2e147, 0xae147ae9},			/* 0.77932=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3fe915b8, 0xbee00000, 0x3ff30a3d, 0x70a3d712},			/* 0.78390=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{11, 0,123,__LINE__, 0x3fee3703, 0xdee00000, 0x3ff921fb, 0x54442d18},			/* 0.94421=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3ff6bcbe, 0xd5e00000, 0x400921fb, 0x54442d18},			/* 1.42108=f(3.14159)*/
-{ 1, 0,123,__LINE__, 0x3ffbe1d7, 0xae500000, 0x4012d97c, 0x7f3321d2},			/* 1.74263=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 0,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{10, 0,123,__LINE__, 0x3fde148a, 0x2dc00000, 0x3fe33333, 0x333332ec},			/* 0.47000=f(0.60000)*/
-{12, 0,123,__LINE__, 0x3ff31a4e, 0x6ee00000, 0x40026666, 0x66666654},			/* 1.19392=f(2.30000)*/
-{ 1, 0,123,__LINE__, 0x3ff9c041, 0xf6e00000, 0x400fffff, 0xffffffee},			/* 1.60943=f(4.00000)*/
-{ 1, 0,123,__LINE__, 0x3ffe6f08, 0x46500000, 0x4016cccc, 0xccccccc4},			/* 1.90210=f(5.70000)*/
-{13, 0,123,__LINE__, 0x4001069e, 0x59a80000, 0x401d9999, 0x99999991},			/* 2.12823=f(7.40000)*/
-{13, 0,123,__LINE__, 0x40028012, 0x97280000, 0x40223333, 0x3333332f},			/* 2.31253=f(9.10000)*/
-{13, 0,123,__LINE__, 0x4003beaa, 0xfae00000, 0x40259999, 0x99999995},			/* 2.46810=f(10.8000)*/
-{15, 0,123,__LINE__, 0x4004d24e, 0xf8e00000, 0x4028ffff, 0xfffffffb},			/* 2.60269=f(12.5000)*/
-{14, 0,123,__LINE__, 0x4005c536, 0x87e00000, 0x402c6666, 0x66666661},			/* 2.72129=f(14.2000)*/
-{16, 0,123,__LINE__, 0x40069e56, 0x97e00000, 0x402fcccc, 0xccccccc7},			/* 2.82731=f(15.9000)*/
-{15, 0,123,__LINE__, 0x400762a2, 0x8ce00000, 0x40319999, 0x99999997},			/* 2.92316=f(17.6000)*/
-{12, 0,123,__LINE__, 0x400815c0, 0x62e00000, 0x40334ccc, 0xccccccca},			/* 3.01062=f(19.3000)*/
-{12, 0,123,__LINE__, 0x4008ba74, 0x76e00000, 0x4034ffff, 0xfffffffd},			/* 3.09104=f(21.0000)*/
-{12, 0,123,__LINE__, 0x400952e4, 0x9a980000, 0x4036b333, 0x33333330},			/* 3.16547=f(22.7000)*/
-{12, 0,123,__LINE__, 0x4009e0c4, 0x2a980000, 0x40386666, 0x66666663},			/* 3.23474=f(24.4000)*/
-{12, 0,123,__LINE__, 0x400a6571, 0xf2980000, 0x403a1999, 0x99999996},			/* 3.29953=f(26.1000)*/
-{12, 0,123,__LINE__, 0x400ae20c, 0x7a980000, 0x403bcccc, 0xccccccc9},			/* 3.36037=f(27.8000)*/
-{12, 0,123,__LINE__, 0x400b5781, 0x16980000, 0x403d7fff, 0xfffffffc},			/* 3.41772=f(29.5000)*/
-0,};
-test_log1pf(m)   {run_vector_1(m,log1pf_vec,(char *)(log1pf),"log1pf","ff");   }	
diff --git a/newlib/libm/test/log2_vec.c b/newlib/libm/test/log2_vec.c
deleted file mode 100644
index 6a76e262f..000000000
--- a/newlib/libm/test/log2_vec.c
+++ /dev/null
@@ -1,400 +0,0 @@
-#include "test.h"
- one_line_type log2_vec[] = {
-{62,0,123,__LINE__, 0xc01149a7, 0x84bcd1b9, 0x3fa99999, 0x9999999a},
-{62,0,123,__LINE__, 0xc00a934f, 0x0979a371, 0x3fb99999, 0x9999999a},
-{62,0,123,__LINE__, 0xc005e54e, 0x37a9c4bc, 0x3fc33333, 0x33333334},
-{62,0,123,__LINE__, 0xc002934f, 0x0979a371, 0x3fc99999, 0x9999999a},
-{62,0,123,__LINE__, 0xc0000000, 0x00000000, 0x3fd00000, 0x00000000},
-{62,0,123,__LINE__, 0xbffbca9c, 0x6f53897a, 0x3fd33333, 0x33333333},
-{62,0,123,__LINE__, 0xbff83bb1, 0x144b3e8a, 0x3fd66666, 0x66666666},
-{62,0,123,__LINE__, 0xbff5269e, 0x12f346e3, 0x3fd99999, 0x99999999},
-{62,0,123,__LINE__, 0xbff26e9a, 0xcbb3cc12, 0x3fdccccc, 0xcccccccc},
-{62,0,123,__LINE__, 0xbff00000, 0x00000001, 0x3fdfffff, 0xffffffff},
-{62,0,123,__LINE__, 0xbfe79538, 0xdea712f5, 0x3fe33333, 0x33333333},
-{62,0,123,__LINE__, 0xbfe3e33b, 0x979f04f9, 0x3fe4cccc, 0xcccccccd},
-{62,0,123,__LINE__, 0xbfe07762, 0x28967d11, 0x3fe66666, 0x66666667},
-{62,0,123,__LINE__, 0xbfda8ff9, 0x71810a5a, 0x3fe80000, 0x00000001},
-{62,0,123,__LINE__, 0xbfd49a78, 0x4bcd1b86, 0x3fe99999, 0x9999999b},
-{62,0,123,__LINE__, 0xbfce02f5, 0x1a35ad7f, 0x3feb3333, 0x33333335},
-{62,0,123,__LINE__, 0xbfc374d6, 0x5d9e6080, 0x3feccccc, 0xcccccccf},
-{62,0,123,__LINE__, 0xbfb2f1b3, 0xbd2f9df8, 0x3fee6666, 0x66666669},
-{62,0,123,__LINE__, 0x3cb71547, 0x652b82fd, 0x3ff00000, 0x00000001},
-{62,0,123,__LINE__, 0x3fb20508, 0xf547ee11, 0x3ff0cccc, 0xccccccce},
-{62,0,123,__LINE__, 0x3fc199b7, 0x28cb9d17, 0x3ff19999, 0x9999999b},
-{62,0,123,__LINE__, 0x3fc9cf23, 0x6bbeb394, 0x3ff26666, 0x66666668},
-{62,0,123,__LINE__, 0x3fd0d58e, 0x42b1da1f, 0x3ff33333, 0x33333335},
-{62,0,123,__LINE__, 0x3fd49a78, 0x4bcd1b94, 0x3ff40000, 0x00000002},
-{62,0,123,__LINE__, 0x3fd83988, 0xd0c1f617, 0x3ff4cccc, 0xcccccccf},
-{62,0,123,__LINE__, 0x3fdbb59b, 0x5fafc565, 0x3ff59999, 0x9999999c},
-{62,0,123,__LINE__, 0x3fe12758, 0x696ea51a, 0x3ff73333, 0x33333336},
-{62,0,123,__LINE__, 0x3fe2b803, 0x473f7ad7, 0x3ff80000, 0x00000003},
-{62,0,123,__LINE__, 0x3fe43b8a, 0x8d7bdcb3, 0x3ff8cccc, 0xccccccd0},
-{62,0,123,__LINE__, 0x3fe5b2c3, 0xda197240, 0x3ff99999, 0x9999999d},
-{62,0,123,__LINE__, 0x3fe71e71, 0x11726219, 0x3ffa6666, 0x6666666a},
-{62,0,123,__LINE__, 0x3fe87f42, 0xb97294a4, 0x3ffb3333, 0x33333337},
-{62,0,123,__LINE__, 0x3fe9d5d9, 0xfd5010ba, 0x3ffc0000, 0x00000004},
-{62,0,123,__LINE__, 0x3feb22ca, 0x689867e3, 0x3ffccccc, 0xccccccd1},
-{62,0,123,__LINE__, 0x3fec669b, 0x6586ad66, 0x3ffd9999, 0x9999999e},
-{62,0,123,__LINE__, 0x3feda1c9, 0x885a0c45, 0x3ffe6666, 0x6666666b},
-{62,0,123,__LINE__, 0x3feed4c7, 0xafa075de, 0x3fff3333, 0x33333338},
-{62,0,123,__LINE__, 0x3ff00000, 0x00000003, 0x40000000, 0x00000002},
-{62,0,123,__LINE__, 0x3ff091ea, 0x6073fc57, 0x40006666, 0x66666668},
-{62,0,123,__LINE__, 0x3ff12050, 0x8f547ee1, 0x4000cccc, 0xccccccce},
-{62,0,123,__LINE__, 0x3ff1ab5c, 0xeadad9c6, 0x40013333, 0x33333334},
-{62,0,123,__LINE__, 0x3ff23336, 0xe51973a2, 0x40019999, 0x9999999a},
-{62,0,123,__LINE__, 0x3ff2b803, 0x473f7ad1, 0x40020000, 0x00000000},
-{62,0,123,__LINE__, 0x3ff339e4, 0x6d77d670, 0x40026666, 0x66666666},
-{62,0,123,__LINE__, 0x3ff3b8fa, 0x7c57a123, 0x4002cccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x3ff43563, 0x90ac7684, 0x40033333, 0x33333332},
-{62,0,123,__LINE__, 0x3ff4af3b, 0xea5cc9cf, 0x40039999, 0x99999998},
-{62,0,123,__LINE__, 0x3ff5269e, 0x12f346e0, 0x4003ffff, 0xfffffffe},
-{62,0,123,__LINE__, 0x3ff59ba3, 0x005907b4, 0x40046666, 0x66666664},
-{62,0,123,__LINE__, 0x3ff60e62, 0x34307d80, 0x4004cccc, 0xccccccca},
-{62,0,123,__LINE__, 0x3ff67ef1, 0xd833bcc4, 0x40053333, 0x33333330},
-{62,0,123,__LINE__, 0x3ff6ed66, 0xd7ebf153, 0x40059999, 0x99999996},
-{62,0,123,__LINE__, 0x3ff759d4, 0xf80cba80, 0x4005ffff, 0xfffffffc},
-{62,0,123,__LINE__, 0x3ff7c44e, 0xebb4c172, 0x40066666, 0x66666662},
-{62,0,123,__LINE__, 0x3ff82ce6, 0x67ccc382, 0x4006cccc, 0xccccccc8},
-{62,0,123,__LINE__, 0x3ff893ac, 0x34b75285, 0x40073333, 0x3333332e},
-{62,0,123,__LINE__, 0x3ff8f8b0, 0x3e7d8942, 0x40079999, 0x99999994},
-{62,0,123,__LINE__, 0x3ff95c01, 0xa39fbd62, 0x4007ffff, 0xfffffffa},
-{62,0,123,__LINE__, 0x3ff9bdae, 0xc2acb3cd, 0x40086666, 0x66666660},
-{62,0,123,__LINE__, 0x3ffa1dc5, 0x46bdee50, 0x4008cccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x3ffa7c52, 0x32f43c42, 0x40093333, 0x3333332c},
-{62,0,123,__LINE__, 0x3ffad961, 0xed0cb916, 0x40099999, 0x99999992},
-{62,0,123,__LINE__, 0x3ffb3500, 0x4723c45f, 0x4009ffff, 0xfffffff8},
-{62,0,123,__LINE__, 0x3ffb8f38, 0x88b93102, 0x400a6666, 0x6666665e},
-{62,0,123,__LINE__, 0x3ffbe815, 0x7706e310, 0x400acccc, 0xccccccc4},
-{62,0,123,__LINE__, 0x3ffc3fa1, 0x5cb94a46, 0x400b3333, 0x3333332a},
-{62,0,123,__LINE__, 0x3ffc95e6, 0x111793d1, 0x400b9999, 0x99999990},
-{62,0,123,__LINE__, 0x3ffceaec, 0xfea80852, 0x400bffff, 0xfffffff6},
-{62,0,123,__LINE__, 0x3ffd3ebf, 0x295bced8, 0x400c6666, 0x6666665c},
-{62,0,123,__LINE__, 0x3ffd9165, 0x344c33e6, 0x400ccccc, 0xccccccc2},
-{62,0,123,__LINE__, 0x3ffde2e7, 0x6712998b, 0x400d3333, 0x33333328},
-{62,0,123,__LINE__, 0x3ffe334d, 0xb2c356a6, 0x400d9999, 0x9999998e},
-{62,0,123,__LINE__, 0x3ffe829f, 0xb6930442, 0x400dffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x3ffed0e4, 0xc42d0616, 0x400e6666, 0x6666665a},
-{62,0,123,__LINE__, 0x3fff1e23, 0xe3c17bf1, 0x400ecccc, 0xccccccc0},
-{62,0,123,__LINE__, 0x3fff6a63, 0xd7d03ae2, 0x400f3333, 0x33333326},
-{62,0,123,__LINE__, 0x3fffb5ab, 0x20b5ec8e, 0x400f9999, 0x9999998c},
-{62,0,123,__LINE__, 0x3fffffff, 0xfffffff6, 0x400fffff, 0xfffffff2},
-{62,0,123,__LINE__, 0x400024b4, 0x3dc5d75a, 0x40103333, 0x3333332c},
-{62,0,123,__LINE__, 0x400048f5, 0x3039fe25, 0x40106666, 0x6666665f},
-{62,0,123,__LINE__, 0x40006cc5, 0xa2e92014, 0x40109999, 0x99999992},
-{62,0,123,__LINE__, 0x40009028, 0x47aa3f6a, 0x4010cccc, 0xccccccc5},
-{62,0,123,__LINE__, 0x4000b31f, 0xb7d64893, 0x4010ffff, 0xfffffff8},
-{62,0,123,__LINE__, 0x4000d5ae, 0x756d6cdd, 0x40113333, 0x3333332b},
-{62,0,123,__LINE__, 0x4000f7d6, 0xec2b87f4, 0x40116666, 0x6666665e},
-{62,0,123,__LINE__, 0x4001199b, 0x728cb9cb, 0x40119999, 0x99999991},
-{62,0,123,__LINE__, 0x40013afe, 0x4ac34723, 0x4011cccc, 0xccccccc4},
-{62,0,123,__LINE__, 0x40015c01, 0xa39fbd63, 0x4011ffff, 0xfffffff7},
-{62,0,123,__LINE__, 0x40017ca7, 0x996c42e9, 0x40123333, 0x3333332a},
-{62,0,123,__LINE__, 0x40019cf2, 0x36bbeb32, 0x40126666, 0x6666665d},
-{62,0,123,__LINE__, 0x4001bce3, 0x752ed5da, 0x40129999, 0x99999990},
-{62,0,123,__LINE__, 0x4001dc7d, 0x3e2bd08c, 0x4012cccc, 0xccccccc3},
-{62,0,123,__LINE__, 0x4001fbc1, 0x6b90267a, 0x4012ffff, 0xfffffff6},
-{62,0,123,__LINE__, 0x40021ab1, 0xc8563b3d, 0x40133333, 0x33333329},
-{62,0,123,__LINE__, 0x40023950, 0x113383b2, 0x40136666, 0x6666665c},
-{62,0,123,__LINE__, 0x4002579d, 0xf52e64e2, 0x40139999, 0x9999998f},
-{62,0,123,__LINE__, 0x4002759d, 0x162c7733, 0x4013cccc, 0xccccccc2},
-{62,0,123,__LINE__, 0x4002934f, 0x0979a36b, 0x4013ffff, 0xfffffff5},
-{62,0,123,__LINE__, 0x4002b0b5, 0x584886c6, 0x40143333, 0x33333328},
-{62,0,123,__LINE__, 0x4002cdd1, 0x802c83d5, 0x40146666, 0x6666665b},
-{62,0,123,__LINE__, 0x4002eaa4, 0xf38ddef4, 0x40149999, 0x9999998e},
-{62,0,123,__LINE__, 0x40030731, 0x1a183ebb, 0x4014cccc, 0xccccccc1},
-{62,0,123,__LINE__, 0x40032377, 0x5123e2da, 0x4014ffff, 0xfffffff4},
-{62,0,123,__LINE__, 0x40033f78, 0xec19de5d, 0x40153333, 0x33333327},
-{62,0,123,__LINE__, 0x40035b37, 0x34d39d41, 0x40156666, 0x6666665a},
-{62,0,123,__LINE__, 0x400376b3, 0x6bf5f8a4, 0x40159999, 0x9999998d},
-{62,0,123,__LINE__, 0x400391ee, 0xc948186b, 0x4015cccc, 0xccccccc0},
-{62,0,123,__LINE__, 0x4003acea, 0x7c065d3b, 0x4015ffff, 0xfffffff3},
-{62,0,123,__LINE__, 0x4003c7a7, 0xab318a05, 0x40163333, 0x33333326},
-{62,0,123,__LINE__, 0x4003e227, 0x75da60b4, 0x40166666, 0x66666659},
-{62,0,123,__LINE__, 0x4003fc6a, 0xf369e28f, 0x40169999, 0x9999998c},
-{62,0,123,__LINE__, 0x40041673, 0x33e661bc, 0x4016cccc, 0xccccccbf},
-{62,0,123,__LINE__, 0x40043041, 0x40358ea2, 0x4016ffff, 0xfffffff2},
-{62,0,123,__LINE__, 0x400449d6, 0x1a5ba93e, 0x40173333, 0x33333325},
-{62,0,123,__LINE__, 0x40046332, 0xbdb7fc23, 0x40176666, 0x66666658},
-{62,0,123,__LINE__, 0x40047c58, 0x1f3ec49d, 0x40179999, 0x9999998b},
-{62,0,123,__LINE__, 0x40049547, 0x2db0a94d, 0x4017cccc, 0xccccccbe},
-{62,0,123,__LINE__, 0x4004ae00, 0xd1cfdead, 0x4017ffff, 0xfffffff1},
-{62,0,123,__LINE__, 0x4004c685, 0xee93170b, 0x40183333, 0x33333324},
-{62,0,123,__LINE__, 0x4004ded7, 0x615659e2, 0x40186666, 0x66666657},
-{62,0,123,__LINE__, 0x4004f6f6, 0x0209dcd7, 0x40189999, 0x9999998a},
-{62,0,123,__LINE__, 0x40050ee2, 0xa35ef724, 0x4018cccc, 0xccccccbd},
-{62,0,123,__LINE__, 0x4005269e, 0x12f346dc, 0x4018ffff, 0xfffffff0},
-{62,0,123,__LINE__, 0x40053e29, 0x197a1e1c, 0x40193333, 0x33333323},
-{62,0,123,__LINE__, 0x40055584, 0x7ae44d14, 0x40196666, 0x66666656},
-{62,0,123,__LINE__, 0x40056cb0, 0xf6865c87, 0x40199999, 0x99999989},
-{62,0,123,__LINE__, 0x400583af, 0x473d4b90, 0x4019cccc, 0xccccccbc},
-{62,0,123,__LINE__, 0x40059a80, 0x2391e22c, 0x4019ffff, 0xffffffef},
-{62,0,123,__LINE__, 0x4005b124, 0x3ddaa957, 0x401a3333, 0x33333322},
-{62,0,123,__LINE__, 0x4005c79c, 0x445c987d, 0x401a6666, 0x66666655},
-{62,0,123,__LINE__, 0x4005dde8, 0xe16a8734, 0x401a9999, 0x99999988},
-{62,0,123,__LINE__, 0x4005f40a, 0xbb837184, 0x401acccc, 0xccccccbb},
-{62,0,123,__LINE__, 0x40060a02, 0x756f9c15, 0x401affff, 0xffffffee},
-{62,0,123,__LINE__, 0x40061fd0, 0xae5ca520, 0x401b3333, 0x33333321},
-{62,0,123,__LINE__, 0x40063576, 0x01f88e22, 0x401b6666, 0x66666654},
-{62,0,123,__LINE__, 0x40064af3, 0x088bc9e4, 0x401b9999, 0x99999987},
-{62,0,123,__LINE__, 0x40066048, 0x571259b4, 0x401bcccc, 0xccccccba},
-{62,0,123,__LINE__, 0x40067576, 0x7f540425, 0x401bffff, 0xffffffed},
-{62,0,123,__LINE__, 0x40068a7e, 0x0ffbaf3e, 0x401c3333, 0x33333320},
-{62,0,123,__LINE__, 0x40069f5f, 0x94ade768, 0x401c6666, 0x66666653},
-{62,0,123,__LINE__, 0x4006b41b, 0x961e9bfc, 0x401c9999, 0x99999986},
-{62,0,123,__LINE__, 0x4006c8b2, 0x9a2619ef, 0x401ccccc, 0xccccccb9},
-{62,0,123,__LINE__, 0x4006dd25, 0x23d54cae, 0x401cffff, 0xffffffec},
-{62,0,123,__LINE__, 0x4006f173, 0xb3894cc2, 0x401d3333, 0x3333331f},
-{62,0,123,__LINE__, 0x4007059e, 0xc6fe4395, 0x401d6666, 0x66666652},
-{62,0,123,__LINE__, 0x400719a6, 0xd961ab50, 0x401d9999, 0x99999985},
-{62,0,123,__LINE__, 0x40072d8c, 0x6363f166, 0x401dcccc, 0xccccccb8},
-{62,0,123,__LINE__, 0x4007414f, 0xdb49821e, 0x401dffff, 0xffffffeb},
-{62,0,123,__LINE__, 0x400754f1, 0xb4fb432b, 0x401e3333, 0x3333331e},
-{62,0,123,__LINE__, 0x40076872, 0x62168307, 0x401e6666, 0x66666651},
-{62,0,123,__LINE__, 0x40077bd2, 0x51fc6288, 0x401e9999, 0x99999984},
-{62,0,123,__LINE__, 0x40078f11, 0xf1e0bdf5, 0x401ecccc, 0xccccccb7},
-{62,0,123,__LINE__, 0x4007a231, 0xacd89a94, 0x401effff, 0xffffffea},
-{62,0,123,__LINE__, 0x4007b531, 0xebe81d6e, 0x401f3333, 0x3333331d},
-{62,0,123,__LINE__, 0x4007c813, 0x16100fdc, 0x401f6666, 0x66666650},
-{62,0,123,__LINE__, 0x4007dad5, 0x905af644, 0x401f9999, 0x99999983},
-{62,0,123,__LINE__, 0x4007ed79, 0xbde9bd0f, 0x401fcccc, 0xccccccb6},
-{62,0,123,__LINE__, 0x4007ffff, 0xfffffff8, 0x401fffff, 0xffffffe9},
-{62,0,123,__LINE__, 0x40081268, 0xb60fef5d, 0x40201999, 0x9999998e},
-{62,0,123,__LINE__, 0x400824b4, 0x3dc5d758, 0x40203333, 0x33333328},
-{62,0,123,__LINE__, 0x400836e2, 0xf3134bfc, 0x40204ccc, 0xccccccc2},
-{62,0,123,__LINE__, 0x400848f5, 0x3039fe23, 0x40206666, 0x6666665c},
-{62,0,123,__LINE__, 0x40085aeb, 0x4dd63bef, 0x40207fff, 0xfffffff6},
-{62,0,123,__LINE__, 0x40086cc5, 0xa2e92012, 0x40209999, 0x99999990},
-{62,0,123,__LINE__, 0x40087e84, 0x84e272cd, 0x4020b333, 0x3333332a},
-{62,0,123,__LINE__, 0x40089028, 0x47aa3f6a, 0x4020cccc, 0xccccccc4},
-{62,0,123,__LINE__, 0x4008a1b1, 0x3daa20ef, 0x4020e666, 0x6666665e},
-{62,0,123,__LINE__, 0x4008b31f, 0xb7d64893, 0x4020ffff, 0xfffffff8},
-{62,0,123,__LINE__, 0x4008c474, 0x05b64073, 0x40211999, 0x99999992},
-{62,0,123,__LINE__, 0x4008d5ae, 0x756d6cde, 0x40213333, 0x3333332c},
-{62,0,123,__LINE__, 0x4008e6cf, 0x53c34e90, 0x40214ccc, 0xccccccc6},
-{62,0,123,__LINE__, 0x4008f7d6, 0xec2b87f5, 0x40216666, 0x66666660},
-{62,0,123,__LINE__, 0x400908c5, 0x88cda79a, 0x40217fff, 0xfffffffa},
-{62,0,123,__LINE__, 0x4009199b, 0x728cb9cd, 0x40219999, 0x99999994},
-{62,0,123,__LINE__, 0x40092a58, 0xf10ea355, 0x4021b333, 0x3333332e},
-{62,0,123,__LINE__, 0x40093afe, 0x4ac34726, 0x4021cccc, 0xccccccc8},
-{62,0,123,__LINE__, 0x40094b8b, 0xc4eb78d0, 0x4021e666, 0x66666662},
-{62,0,123,__LINE__, 0x40095c01, 0xa39fbd66, 0x4021ffff, 0xfffffffc},
-{62,0,123,__LINE__, 0x40096c60, 0x29d6dc80, 0x40221999, 0x99999996},
-{62,0,123,__LINE__, 0x40097ca7, 0x996c42ec, 0x40223333, 0x33333330},
-{62,0,123,__LINE__, 0x40098cd8, 0x3326389c, 0x40224ccc, 0xccccccca},
-{62,0,123,__LINE__, 0x40099cf2, 0x36bbeb37, 0x40226666, 0x66666664},
-{62,0,123,__LINE__, 0x4009acf5, 0xe2db4ec8, 0x40227fff, 0xfffffffe},
-{62,0,123,__LINE__, 0x4009bce3, 0x752ed5de, 0x40229999, 0x99999998},
-{62,0,123,__LINE__, 0x4009ccbb, 0x2a630268, 0x4022b333, 0x33333332},
-{62,0,123,__LINE__, 0x4009dc7d, 0x3e2bd092, 0x4022cccc, 0xcccccccc},
-{62,0,123,__LINE__, 0x4009ec29, 0xeb49fcd8, 0x4022e666, 0x66666666},
-{62,0,123,__LINE__, 0x4009fbc1, 0x6b902681, 0x40230000, 0x00000000},
-{62,0,123,__LINE__, 0x400a0b43, 0xf7e7cf8d, 0x40231999, 0x9999999a},
-{62,0,123,__LINE__, 0x400a1ab1, 0xc8563b43, 0x40233333, 0x33333334},
-{62,0,123,__LINE__, 0x400a2a0b, 0x14012c59, 0x40234ccc, 0xccccccce},
-{62,0,123,__LINE__, 0x400a3950, 0x113383b9, 0x40236666, 0x66666668},
-{62,0,123,__LINE__, 0x400a4880, 0xf561c0e8, 0x40238000, 0x00000002},
-{62,0,123,__LINE__, 0x400a579d, 0xf52e64ea, 0x40239999, 0x9999999c},
-{62,0,123,__LINE__, 0x400a66a7, 0x446e3896, 0x4023b333, 0x33333336},
-{62,0,123,__LINE__, 0x400a759d, 0x162c773b, 0x4023cccc, 0xccccccd0},
-{62,0,123,__LINE__, 0x400a847f, 0x9caede5f, 0x4023e666, 0x6666666a},
-{62,0,123,__LINE__, 0x400a934f, 0x0979a374, 0x40240000, 0x00000004},
-{62,0,123,__LINE__, 0x400aa20b, 0x8d535042, 0x40241999, 0x9999999e},
-{62,0,123,__LINE__, 0x400ab0b5, 0x584886d0, 0x40243333, 0x33333338},
-{62,0,123,__LINE__, 0x400abf4c, 0x99afad75, 0x40244ccc, 0xccccccd2},
-{62,0,123,__LINE__, 0x400acdd1, 0x802c83df, 0x40246666, 0x6666666c},
-{62,0,123,__LINE__, 0x400adc44, 0x39b3a19f, 0x40248000, 0x00000006},
-{62,0,123,__LINE__, 0x400aeaa4, 0xf38ddefe, 0x40249999, 0x999999a0},
-{62,0,123,__LINE__, 0x400af8f3, 0xda5ba8a4, 0x4024b333, 0x3333333a},
-{62,0,123,__LINE__, 0x400b0731, 0x1a183ec6, 0x4024cccc, 0xccccccd4},
-{62,0,123,__LINE__, 0x400b155c, 0xde1ce055, 0x4024e666, 0x6666666e},
-{62,0,123,__LINE__, 0x400b2377, 0x5123e2e5, 0x40250000, 0x00000008},
-{62,0,123,__LINE__, 0x400b3180, 0x9d4bb7b2, 0x40251999, 0x999999a2},
-{62,0,123,__LINE__, 0x400b3f78, 0xec19de68, 0x40253333, 0x3333333c},
-{62,0,123,__LINE__, 0x400b4d60, 0x667dc62a, 0x40254ccc, 0xccccccd6},
-{62,0,123,__LINE__, 0x400b5b37, 0x34d39d4d, 0x40256666, 0x66666670},
-{62,0,123,__LINE__, 0x400b68fd, 0x7ee71059, 0x40258000, 0x0000000a},
-{62,0,123,__LINE__, 0x400b76b3, 0x6bf5f8b1, 0x40259999, 0x999999a4},
-{62,0,123,__LINE__, 0x400b8459, 0x22b2fb5e, 0x4025b333, 0x3333333e},
-{62,0,123,__LINE__, 0x400b91ee, 0xc9481877, 0x4025cccc, 0xccccccd8},
-{62,0,123,__LINE__, 0x400b9f74, 0x85592b84, 0x4025e666, 0x66666672},
-{62,0,123,__LINE__, 0x400bacea, 0x7c065d48, 0x40260000, 0x0000000c},
-{62,0,123,__LINE__, 0x400bba50, 0xd1ee8761, 0x40261999, 0x999999a6},
-{62,0,123,__LINE__, 0x400bc7a7, 0xab318a13, 0x40263333, 0x33333340},
-{62,0,123,__LINE__, 0x400bd4ef, 0x2b7294aa, 0x40264ccc, 0xccccccda},
-{62,0,123,__LINE__, 0x400be227, 0x75da60c2, 0x40266666, 0x66666674},
-{62,0,123,__LINE__, 0x400bef50, 0xad1960e1, 0x40268000, 0x0000000e},
-{62,0,123,__LINE__, 0x400bfc6a, 0xf369e29e, 0x40269999, 0x999999a8},
-{62,0,123,__LINE__, 0x400c0976, 0x6a9224c8, 0x4026b333, 0x33333342},
-{62,0,123,__LINE__, 0x400c1673, 0x33e661cb, 0x4026cccc, 0xccccccdc},
-{62,0,123,__LINE__, 0x400c2361, 0x704acea3, 0x4026e666, 0x66666676},
-{62,0,123,__LINE__, 0x400c3041, 0x40358eb2, 0x40270000, 0x00000010},
-{62,0,123,__LINE__, 0x400c3d12, 0xc3b09cba, 0x40271999, 0x999999aa},
-{62,0,123,__LINE__, 0x400c49d6, 0x1a5ba94e, 0x40273333, 0x33333344},
-{62,0,123,__LINE__, 0x400c568b, 0x636deef0, 0x40274ccc, 0xccccccde},
-{62,0,123,__LINE__, 0x400c6332, 0xbdb7fc33, 0x40276666, 0x66666678},
-{62,0,123,__LINE__, 0x400c6fcc, 0x47a5740c, 0x40278000, 0x00000012},
-{62,0,123,__LINE__, 0x400c7c58, 0x1f3ec4ad, 0x40279999, 0x999999ac},
-{62,0,123,__LINE__, 0x400c88d6, 0x622ad50a, 0x4027b333, 0x33333346},
-{62,0,123,__LINE__, 0x400c9547, 0x2db0a95e, 0x4027cccc, 0xcccccce0},
-{62,0,123,__LINE__, 0x400ca1aa, 0x9eb8feda, 0x4027e666, 0x6666667a},
-{62,0,123,__LINE__, 0x400cae00, 0xd1cfdebe, 0x40280000, 0x00000014},
-{62,0,123,__LINE__, 0x400cba49, 0xe326290e, 0x40281999, 0x999999ae},
-{62,0,123,__LINE__, 0x400cc685, 0xee93171c, 0x40283333, 0x33333348},
-{62,0,123,__LINE__, 0x400cd2b5, 0x0f95b61e, 0x40284ccc, 0xcccccce2},
-{62,0,123,__LINE__, 0x400cded7, 0x615659f4, 0x40286666, 0x6666667c},
-{62,0,123,__LINE__, 0x400ceaec, 0xfea80864, 0x40288000, 0x00000016},
-{62,0,123,__LINE__, 0x400cf6f6, 0x0209dce9, 0x40289999, 0x999999b0},
-{62,0,123,__LINE__, 0x400d02f2, 0x85a8654d, 0x4028b333, 0x3333334a},
-{62,0,123,__LINE__, 0x400d0ee2, 0xa35ef736, 0x4028cccc, 0xcccccce4},
-{62,0,123,__LINE__, 0x400d1ac6, 0x74b8fed8, 0x4028e666, 0x6666667e},
-{62,0,123,__LINE__, 0x400d269e, 0x12f346ee, 0x40290000, 0x00000018},
-{62,0,123,__LINE__, 0x400d3269, 0x96fd3a26, 0x40291999, 0x999999b2},
-{62,0,123,__LINE__, 0x400d3e29, 0x197a1e2f, 0x40293333, 0x3333334c},
-{62,0,123,__LINE__, 0x400d49dc, 0xb2c24886, 0x40294ccc, 0xcccccce6},
-{62,0,123,__LINE__, 0x400d5584, 0x7ae44d27, 0x40296666, 0x66666680},
-{62,0,123,__LINE__, 0x400d6120, 0x89a62759, 0x40298000, 0x0000001a},
-{62,0,123,__LINE__, 0x400d6cb0, 0xf6865c9a, 0x40299999, 0x999999b4},
-{62,0,123,__LINE__, 0x400d7835, 0xd8bd19f1, 0x4029b333, 0x3333334e},
-{62,0,123,__LINE__, 0x400d83af, 0x473d4ba3, 0x4029cccc, 0xcccccce8},
-{62,0,123,__LINE__, 0x400d8f1d, 0x58b5af91, 0x4029e666, 0x66666682},
-{62,0,123,__LINE__, 0x400d9a80, 0x2391e240, 0x402a0000, 0x0000001c},
-{62,0,123,__LINE__, 0x400da5d7, 0xbdfb66ba, 0x402a1999, 0x999999b6},
-{62,0,123,__LINE__, 0x400db124, 0x3ddaa96c, 0x402a3333, 0x33333350},
-{62,0,123,__LINE__, 0x400dbc65, 0xb8d7fe04, 0x402a4ccc, 0xccccccea},
-{62,0,123,__LINE__, 0x400dc79c, 0x445c9892, 0x402a6666, 0x66666684},
-{62,0,123,__LINE__, 0x400dd2c7, 0xf59381e2, 0x402a8000, 0x0000001e},
-{62,0,123,__LINE__, 0x400ddde8, 0xe16a8749, 0x402a9999, 0x999999b8},
-{62,0,123,__LINE__, 0x400de8ff, 0x1c9325ea, 0x402ab333, 0x33333352},
-{62,0,123,__LINE__, 0x400df40a, 0xbb837199, 0x402acccc, 0xccccccec},
-{62,0,123,__LINE__, 0x400dff0b, 0xd276f76e, 0x402ae666, 0x66666686},
-{62,0,123,__LINE__, 0x400e0a02, 0x756f9c2a, 0x402b0000, 0x00000020},
-{62,0,123,__LINE__, 0x400e14ee, 0xb836767a, 0x402b1999, 0x999999ba},
-{62,0,123,__LINE__, 0x400e1fd0, 0xae5ca535, 0x402b3333, 0x33333354},
-{62,0,123,__LINE__, 0x400e2aa8, 0x6b3c21b1, 0x402b4ccc, 0xccccccee},
-{62,0,123,__LINE__, 0x400e3576, 0x01f88e38, 0x402b6666, 0x66666688},
-{62,0,123,__LINE__, 0x400e4039, 0x858000c2, 0x402b8000, 0x00000022},
-{62,0,123,__LINE__, 0x400e4af3, 0x088bc9fb, 0x402b9999, 0x999999bc},
-{62,0,123,__LINE__, 0x400e55a2, 0x9da138b4, 0x402bb333, 0x33333356},
-{62,0,123,__LINE__, 0x400e6048, 0x571259cb, 0x402bcccc, 0xccccccf0},
-{62,0,123,__LINE__, 0x400e6ae4, 0x46feb4a2, 0x402be666, 0x6666668a},
-{62,0,123,__LINE__, 0x400e7576, 0x7f54043c, 0x402c0000, 0x00000024},
-{62,0,123,__LINE__, 0x400e7fff, 0x11ceed00, 0x402c1999, 0x999999be},
-{62,0,123,__LINE__, 0x400e8a7e, 0x0ffbaf56, 0x402c3333, 0x33333358},
-{62,0,123,__LINE__, 0x400e94f3, 0x8b36d702, 0x402c4ccc, 0xccccccf2},
-{62,0,123,__LINE__, 0x400e9f5f, 0x94ade780, 0x402c6666, 0x6666668c},
-{62,0,123,__LINE__, 0x400ea9c2, 0x3d600544, 0x402c8000, 0x00000026},
-{62,0,123,__LINE__, 0x400eb41b, 0x961e9c13, 0x402c9999, 0x999999c0},
-{62,0,123,__LINE__, 0x400ebe6b, 0xaf8e0267, 0x402cb333, 0x3333335a},
-{62,0,123,__LINE__, 0x400ec8b2, 0x9a261a07, 0x402ccccc, 0xccccccf4},
-{62,0,123,__LINE__, 0x400ed2f0, 0x6632edd0, 0x402ce666, 0x6666668e},
-{62,0,123,__LINE__, 0x400edd25, 0x23d54cc6, 0x402d0000, 0x00000028},
-{62,0,123,__LINE__, 0x400ee750, 0xe303627d, 0x402d1999, 0x999999c2},
-{62,0,123,__LINE__, 0x400ef173, 0xb3894cda, 0x402d3333, 0x3333335c},
-{62,0,123,__LINE__, 0x400efb8d, 0xa509af56, 0x402d4ccc, 0xccccccf6},
-{62,0,123,__LINE__, 0x400f059e, 0xc6fe43ad, 0x402d6666, 0x66666690},
-{62,0,123,__LINE__, 0x400f0fa7, 0x28b86826, 0x402d8000, 0x0000002a},
-{62,0,123,__LINE__, 0x400f19a6, 0xd961ab68, 0x402d9999, 0x999999c4},
-{62,0,123,__LINE__, 0x400f239d, 0xe7fc55fe, 0x402db333, 0x3333335e},
-{62,0,123,__LINE__, 0x400f2d8c, 0x6363f17e, 0x402dcccc, 0xccccccf8},
-{62,0,123,__LINE__, 0x400f3772, 0x5a4dcd7c, 0x402de666, 0x66666692},
-{62,0,123,__LINE__, 0x400f414f, 0xdb498236, 0x402e0000, 0x0000002c},
-{62,0,123,__LINE__, 0x400f4b24, 0xf4c17120, 0x402e1999, 0x999999c6},
-{62,0,123,__LINE__, 0x400f54f1, 0xb4fb4344, 0x402e3333, 0x33333360},
-{62,0,123,__LINE__, 0x400f5eb6, 0x2a186592, 0x402e4ccc, 0xccccccfa},
-{62,0,123,__LINE__, 0x400f6872, 0x62168321, 0x402e6666, 0x66666694},
-{62,0,123,__LINE__, 0x400f7226, 0x6acffd6c, 0x402e8000, 0x0000002e},
-{62,0,123,__LINE__, 0x400f7bd2, 0x51fc62a1, 0x402e9999, 0x999999c8},
-{62,0,123,__LINE__, 0x400f8576, 0x2530e1f2, 0x402eb333, 0x33333362},
-{62,0,123,__LINE__, 0x400f8f11, 0xf1e0be0f, 0x402ecccc, 0xccccccfc},
-{62,0,123,__LINE__, 0x400f98a5, 0xc55dbdc0, 0x402ee666, 0x66666696},
-{62,0,123,__LINE__, 0x400fabb5, 0xb5616e63, 0x402f1999, 0x999999ca},
-{62,0,123,__LINE__, 0x400fb531, 0xebe81d88, 0x402f3333, 0x33333364},
-{62,0,123,__LINE__, 0x400fbea6, 0x5d3cc171, 0x402f4ccc, 0xccccccfe},
-{62,0,123,__LINE__, 0x400fc813, 0x16100ff7, 0x402f6666, 0x66666698},
-{62,0,123,__LINE__, 0x400fd178, 0x22f3c1a8, 0x402f8000, 0x00000032},
-{62,0,123,__LINE__, 0x400fdad5, 0x905af65f, 0x402f9999, 0x999999cc},
-{62,0,123,__LINE__, 0x400fe42b, 0x6a9a9840, 0x402fb333, 0x33333366},
-{62,0,123,__LINE__, 0x400fed79, 0xbde9bd2a, 0x402fcccc, 0xcccccd00},
-{62,0,123,__LINE__, 0x400ff6c0, 0x9662069a, 0x402fe666, 0x6666669a},
-{62,0,123,__LINE__, 0x40100000, 0x00000009, 0x40300000, 0x0000001a},
-{62,0,123,__LINE__, 0x4010049c, 0x0351be07, 0x40300ccc, 0xcccccce7},
-{62,0,123,__LINE__, 0x40100934, 0x5b07f7bc, 0x40301999, 0x999999b4},
-{62,0,123,__LINE__, 0x40100dc9, 0x0cf665dd, 0x40302666, 0x66666681},
-{62,0,123,__LINE__, 0x4010125a, 0x1ee2ebb9, 0x40303333, 0x3333334e},
-{62,0,123,__LINE__, 0x401016e7, 0x9685c2dc, 0x40304000, 0x0000001b},
-{62,0,123,__LINE__, 0x40101b71, 0x7989a60b, 0x40304ccc, 0xcccccce8},
-{62,0,123,__LINE__, 0x40101ff7, 0xcd8bfb9d, 0x40305999, 0x999999b5},
-{62,0,123,__LINE__, 0x4010247a, 0x981cff1f, 0x40306666, 0x66666682},
-{62,0,123,__LINE__, 0x401028f9, 0xdebfea69, 0x40307333, 0x3333334f},
-{62,0,123,__LINE__, 0x40102d75, 0xa6eb1e05, 0x40308000, 0x0000001c},
-{62,0,123,__LINE__, 0x401031ed, 0xf60848fd, 0x40308ccc, 0xcccccce9},
-{62,0,123,__LINE__, 0x40103662, 0xd1749016, 0x40309999, 0x999999b6},
-{62,0,123,__LINE__, 0x40103ad4, 0x3e80b46a, 0x4030a666, 0x66666683},
-{62,0,123,__LINE__, 0x40103f42, 0x42713974, 0x4030b333, 0x33333350},
-{62,0,123,__LINE__, 0x401043ac, 0xe27e8a88, 0x4030c000, 0x0000001d},
-{62,0,123,__LINE__, 0x40104814, 0x23d51fc2, 0x4030cccc, 0xccccccea},
-{62,0,123,__LINE__, 0x40104c78, 0x0b95a25b, 0x4030d999, 0x999999b7},
-{62,0,123,__LINE__, 0x401050d8, 0x9ed51084, 0x4030e666, 0x66666684},
-{62,0,123,__LINE__, 0x40105535, 0xe29ce0af, 0x4030f333, 0x33333351},
-{62,0,123,__LINE__, 0x4010598f, 0xdbeb2457, 0x40310000, 0x0000001e},
-{62,0,123,__LINE__, 0x40105de6, 0x8fb2aa41, 0x40310ccc, 0xcccccceb},
-{62,0,123,__LINE__, 0x4010623a, 0x02db2046, 0x40311999, 0x999999b8},
-{62,0,123,__LINE__, 0x4010668a, 0x3a413495, 0x40312666, 0x66666685},
-{62,0,123,__LINE__, 0x40106ad7, 0x3ab6b67c, 0x40313333, 0x33333352},
-{62,0,123,__LINE__, 0x40106f21, 0x0902b6b9, 0x40314000, 0x0000001f},
-{62,0,123,__LINE__, 0x40107367, 0xa9e1a755, 0x40314ccc, 0xccccccec},
-{62,0,123,__LINE__, 0x401077ab, 0x22057b00, 0x40315999, 0x999999b9},
-{62,0,123,__LINE__, 0x40107beb, 0x7615c407, 0x40316666, 0x66666686},
-{62,0,123,__LINE__, 0x40108028, 0xaaafd2cd, 0x40317333, 0x33333353},
-{62,0,123,__LINE__, 0x40108462, 0xc466d3da, 0x40318000, 0x00000020},
-{62,0,123,__LINE__, 0x40108899, 0xc7c3ed7a, 0x40318ccc, 0xcccccced},
-{62,0,123,__LINE__, 0x40108ccd, 0xb9465cf3, 0x40319999, 0x999999ba},
-{62,0,123,__LINE__, 0x401090fe, 0x9d63934e, 0x4031a666, 0x66666687},
-{62,0,123,__LINE__, 0x4010952c, 0x788751b7, 0x4031b333, 0x33333354},
-{62,0,123,__LINE__, 0x40109957, 0x4f13c57c, 0x4031c000, 0x00000021},
-{62,0,123,__LINE__, 0x40109d7f, 0x2561a39f, 0x4031cccc, 0xccccccee},
-{62,0,123,__LINE__, 0x4010a1a3, 0xffc0440f, 0x4031d999, 0x999999bb},
-{62,0,123,__LINE__, 0x4010a5c5, 0xe275bc74, 0x4031e666, 0x66666688},
-{62,0,123,__LINE__, 0x4010a9e4, 0xd1befaa6, 0x4031f333, 0x33333355},
-{62,0,123,__LINE__, 0x4010ae00, 0xd1cfdebf, 0x40320000, 0x00000022},
-{62,0,123,__LINE__, 0x4010b219, 0xe6d354d3, 0x40320ccc, 0xccccccef},
-{62,0,123,__LINE__, 0x4010b630, 0x14eb6e4c, 0x40321999, 0x999999bc},
-{62,0,123,__LINE__, 0x4010ba43, 0x60317aee, 0x40322666, 0x66666689},
-{62,0,123,__LINE__, 0x4010be53, 0xccb62182, 0x40323333, 0x33333356},
-{62,0,123,__LINE__, 0x4010c261, 0x5e817829, 0x40324000, 0x00000023},
-{62,0,123,__LINE__, 0x4010c66c, 0x19931c5a, 0x40324ccc, 0xccccccf0},
-{62,0,123,__LINE__, 0x4010ca74, 0x01e24a92, 0x40325999, 0x999999bd},
-{62,0,123,__LINE__, 0x4010ce79, 0x1b5df5a7, 0x40326666, 0x6666668a},
-{62,0,123,__LINE__, 0x4010d27b, 0x69ecddd5, 0x40327333, 0x33333357},
-{62,0,123,__LINE__, 0x4010d67a, 0xf16da770, 0x40328000, 0x00000024},
-{62,0,123,__LINE__, 0x4010da77, 0xb5b6f153, 0x40328ccc, 0xccccccf1},
-{62,0,123,__LINE__, 0x4010de71, 0xba976afb, 0x40329999, 0x999999be},
-{62,0,123,__LINE__, 0x4010e269, 0x03d5ea53, 0x4032a666, 0x6666668b},
-{62,0,123,__LINE__, 0x4010e65d, 0x95318140, 0x4032b333, 0x33333358},
-{62,0,123,__LINE__, 0x4010ea4f, 0x726192d7, 0x4032c000, 0x00000025},
-{62,0,123,__LINE__, 0x4010ee3e, 0x9f15e854, 0x4032cccc, 0xccccccf2},
-{62,0,123,__LINE__, 0x4010f22b, 0x1ef6c5c8, 0x4032d999, 0x999999bf},
-{62,0,123,__LINE__, 0x4010f614, 0xf5a4fe78, 0x4032e666, 0x6666668c},
-{62,0,123,__LINE__, 0x4010f9fc, 0x26ba0906, 0x4032f333, 0x33333359},
-{62,0,123,__LINE__, 0x4010fde0, 0xb5c8134c, 0x40330000, 0x00000026},
-{62,0,123,__LINE__, 0x401101c2, 0xa65a15f3, 0x40330ccc, 0xccccccf3},
-{62,0,123,__LINE__, 0x401105a1, 0xfbf3e7d2, 0x40331999, 0x999999c0},
-{62,0,123,__LINE__, 0x4011097e, 0xba1250ff, 0x40332666, 0x6666668d},
-{62,0,123,__LINE__, 0x40110d58, 0xe42b1dad, 0x40333333, 0x3333335a},
-{62,0,123,__LINE__, 0x40111130, 0x7dad30c3, 0x40334000, 0x00000027},
-{62,0,123,__LINE__, 0x40111505, 0x8a009638, 0x40334ccc, 0xccccccf4},
-{62,0,123,__LINE__, 0x401118d8, 0x0c869531, 0x40335999, 0x999999c1},
-{62,0,123,__LINE__, 0x40111ca8, 0x0899c1e8, 0x40336666, 0x6666668e},
-{62,0,123,__LINE__, 0x40112075, 0x818e0f4e, 0x40337333, 0x3333335b},
-{62,0,123,__LINE__, 0x40112440, 0x7ab0e07f, 0x40338000, 0x00000028},
-{62,0,123,__LINE__, 0x40112808, 0xf74919f4, 0x40338ccc, 0xccccccf5},
-{62,0,123,__LINE__, 0x40112bce, 0xfa973280, 0x40339999, 0x999999c2},
-{62,0,123,__LINE__, 0x40112f92, 0x87d54416, 0x4033a666, 0x6666668f},
-{62,0,123,__LINE__, 0x40113353, 0xa2371c56, 0x4033b333, 0x3333335c},
-{62,0,123,__LINE__, 0x40113712, 0x4cea4ceb, 0x4033c000, 0x00000029},
-{62,0,123,__LINE__, 0x40113ace, 0x8b163ba8, 0x4033cccc, 0xccccccf6},
-{62,0,123,__LINE__, 0x40113e88, 0x5fdc3280, 0x4033d999, 0x999999c3},
-{62,0,123,__LINE__, 0x4011423f, 0xce576f3a, 0x4033e666, 0x66666690},
-{62,0,123,__LINE__, 0x401145f4, 0xd99d3304, 0x4033f333, 0x3333335d},
-0,};
-test_log2(m)   {run_vector_1(m,log2_vec,(char *)(log2),"log2","dd");   }	
diff --git a/newlib/libm/test/log2f_vec.c b/newlib/libm/test/log2f_vec.c
deleted file mode 100644
index a31ca2ff2..000000000
--- a/newlib/libm/test/log2f_vec.c
+++ /dev/null
@@ -1,402 +0,0 @@
-#include "test.h"
- one_line_type log2f_vec[] = {
-{31,0,123,__LINE__, 0xc01149a7, 0x84bcd1b9, 0x3fa99999, 0x9999999a},
-{31,0,123,__LINE__, 0xc00a934f, 0x0979a371, 0x3fb99999, 0x9999999a},
-{31,0,123,__LINE__, 0xc005e54e, 0x37a9c4bc, 0x3fc33333, 0x33333334},
-{31,0,123,__LINE__, 0xc002934f, 0x0979a371, 0x3fc99999, 0x9999999a},
-{31,0,123,__LINE__, 0xc0000000, 0x00000000, 0x3fd00000, 0x00000000},
-{31,0,123,__LINE__, 0xbffbca9c, 0x6f53897a, 0x3fd33333, 0x33333333},
-{31,0,123,__LINE__, 0xbff83bb1, 0x144b3e8a, 0x3fd66666, 0x66666666},
-{31,0,123,__LINE__, 0xbff5269e, 0x12f346e3, 0x3fd99999, 0x99999999},
-{31,0,123,__LINE__, 0xbff26e9a, 0xcbb3cc12, 0x3fdccccc, 0xcccccccc},
-{31,0,123,__LINE__, 0xbff00000, 0x00000001, 0x3fdfffff, 0xffffffff},
-{31,0,123,__LINE__, 0xbfeb9992, 0x35cd18bf, 0x3fe19999, 0x99999999},
-{31,0,123,__LINE__, 0xbfe79538, 0xdea712f5, 0x3fe33333, 0x33333333},
-{31,0,123,__LINE__, 0xbfe3e33b, 0x979f04f9, 0x3fe4cccc, 0xcccccccd},
-{31,0,123,__LINE__, 0xbfe07762, 0x28967d11, 0x3fe66666, 0x66666667},
-{31,0,123,__LINE__, 0xbfda8ff9, 0x71810a5a, 0x3fe80000, 0x00000001},
-{31,0,123,__LINE__, 0xbfd49a78, 0x4bcd1b86, 0x3fe99999, 0x9999999b},
-{31,0,123,__LINE__, 0xbfce02f5, 0x1a35ad7f, 0x3feb3333, 0x33333335},
-{31,0,123,__LINE__, 0xbfc374d6, 0x5d9e6080, 0x3feccccc, 0xcccccccf},
-{31,0,123,__LINE__, 0xbfb2f1b3, 0xbd2f9df8, 0x3fee6666, 0x66666669},
-{31,0,123,__LINE__, 0x3fb20508, 0xf547ee11, 0x3ff0cccc, 0xccccccce},
-{31,0,123,__LINE__, 0x3fc199b7, 0x28cb9d17, 0x3ff19999, 0x9999999b},
-{31,0,123,__LINE__, 0x3fc9cf23, 0x6bbeb394, 0x3ff26666, 0x66666668},
-{31,0,123,__LINE__, 0x3fd0d58e, 0x42b1da1f, 0x3ff33333, 0x33333335},
-{31,0,123,__LINE__, 0x3fd49a78, 0x4bcd1b94, 0x3ff40000, 0x00000002},
-{31,0,123,__LINE__, 0x3fd83988, 0xd0c1f617, 0x3ff4cccc, 0xcccccccf},
-{31,0,123,__LINE__, 0x3fdbb59b, 0x5fafc565, 0x3ff59999, 0x9999999c},
-{31,0,123,__LINE__, 0x3fdf113b, 0xaed305e6, 0x3ff66666, 0x66666669},
-{31,0,123,__LINE__, 0x3fe12758, 0x696ea51a, 0x3ff73333, 0x33333336},
-{31,0,123,__LINE__, 0x3fe2b803, 0x473f7ad7, 0x3ff80000, 0x00000003},
-{31,0,123,__LINE__, 0x3fe43b8a, 0x8d7bdcb3, 0x3ff8cccc, 0xccccccd0},
-{31,0,123,__LINE__, 0x3fe5b2c3, 0xda197240, 0x3ff99999, 0x9999999d},
-{31,0,123,__LINE__, 0x3fe71e71, 0x11726219, 0x3ffa6666, 0x6666666a},
-{31,0,123,__LINE__, 0x3fe87f42, 0xb97294a4, 0x3ffb3333, 0x33333337},
-{31,0,123,__LINE__, 0x3fe9d5d9, 0xfd5010ba, 0x3ffc0000, 0x00000004},
-{31,0,123,__LINE__, 0x3feb22ca, 0x689867e3, 0x3ffccccc, 0xccccccd1},
-{31,0,123,__LINE__, 0x3fec669b, 0x6586ad66, 0x3ffd9999, 0x9999999e},
-{31,0,123,__LINE__, 0x3feda1c9, 0x885a0c45, 0x3ffe6666, 0x6666666b},
-{31,0,123,__LINE__, 0x3feed4c7, 0xafa075de, 0x3fff3333, 0x33333338},
-{31,0,123,__LINE__, 0x3ff00000, 0x00000003, 0x40000000, 0x00000002},
-{31,0,123,__LINE__, 0x3ff091ea, 0x6073fc57, 0x40006666, 0x66666668},
-{31,0,123,__LINE__, 0x3ff12050, 0x8f547ee1, 0x4000cccc, 0xccccccce},
-{31,0,123,__LINE__, 0x3ff1ab5c, 0xeadad9c6, 0x40013333, 0x33333334},
-{31,0,123,__LINE__, 0x3ff23336, 0xe51973a2, 0x40019999, 0x9999999a},
-{31,0,123,__LINE__, 0x3ff2b803, 0x473f7ad1, 0x40020000, 0x00000000},
-{31,0,123,__LINE__, 0x3ff339e4, 0x6d77d670, 0x40026666, 0x66666666},
-{31,0,123,__LINE__, 0x3ff3b8fa, 0x7c57a123, 0x4002cccc, 0xcccccccc},
-{31,0,123,__LINE__, 0x3ff43563, 0x90ac7684, 0x40033333, 0x33333332},
-{31,0,123,__LINE__, 0x3ff4af3b, 0xea5cc9cf, 0x40039999, 0x99999998},
-{31,0,123,__LINE__, 0x3ff5269e, 0x12f346e0, 0x4003ffff, 0xfffffffe},
-{31,0,123,__LINE__, 0x3ff59ba3, 0x005907b4, 0x40046666, 0x66666664},
-{31,0,123,__LINE__, 0x3ff60e62, 0x34307d80, 0x4004cccc, 0xccccccca},
-{31,0,123,__LINE__, 0x3ff67ef1, 0xd833bcc4, 0x40053333, 0x33333330},
-{31,0,123,__LINE__, 0x3ff6ed66, 0xd7ebf153, 0x40059999, 0x99999996},
-{31,0,123,__LINE__, 0x3ff759d4, 0xf80cba80, 0x4005ffff, 0xfffffffc},
-{31,0,123,__LINE__, 0x3ff7c44e, 0xebb4c172, 0x40066666, 0x66666662},
-{31,0,123,__LINE__, 0x3ff82ce6, 0x67ccc382, 0x4006cccc, 0xccccccc8},
-{31,0,123,__LINE__, 0x3ff893ac, 0x34b75285, 0x40073333, 0x3333332e},
-{31,0,123,__LINE__, 0x3ff8f8b0, 0x3e7d8942, 0x40079999, 0x99999994},
-{31,0,123,__LINE__, 0x3ff95c01, 0xa39fbd62, 0x4007ffff, 0xfffffffa},
-{31,0,123,__LINE__, 0x3ff9bdae, 0xc2acb3cd, 0x40086666, 0x66666660},
-{31,0,123,__LINE__, 0x3ffa1dc5, 0x46bdee50, 0x4008cccc, 0xccccccc6},
-{31,0,123,__LINE__, 0x3ffa7c52, 0x32f43c42, 0x40093333, 0x3333332c},
-{31,0,123,__LINE__, 0x3ffad961, 0xed0cb916, 0x40099999, 0x99999992},
-{31,0,123,__LINE__, 0x3ffb3500, 0x4723c45f, 0x4009ffff, 0xfffffff8},
-{31,0,123,__LINE__, 0x3ffb8f38, 0x88b93102, 0x400a6666, 0x6666665e},
-{31,0,123,__LINE__, 0x3ffbe815, 0x7706e310, 0x400acccc, 0xccccccc4},
-{31,0,123,__LINE__, 0x3ffc3fa1, 0x5cb94a46, 0x400b3333, 0x3333332a},
-{31,0,123,__LINE__, 0x3ffc95e6, 0x111793d1, 0x400b9999, 0x99999990},
-{31,0,123,__LINE__, 0x3ffceaec, 0xfea80852, 0x400bffff, 0xfffffff6},
-{31,0,123,__LINE__, 0x3ffd3ebf, 0x295bced8, 0x400c6666, 0x6666665c},
-{31,0,123,__LINE__, 0x3ffd9165, 0x344c33e6, 0x400ccccc, 0xccccccc2},
-{31,0,123,__LINE__, 0x3ffde2e7, 0x6712998b, 0x400d3333, 0x33333328},
-{31,0,123,__LINE__, 0x3ffe334d, 0xb2c356a6, 0x400d9999, 0x9999998e},
-{31,0,123,__LINE__, 0x3ffe829f, 0xb6930442, 0x400dffff, 0xfffffff4},
-{31,0,123,__LINE__, 0x3ffed0e4, 0xc42d0616, 0x400e6666, 0x6666665a},
-{31,0,123,__LINE__, 0x3fff1e23, 0xe3c17bf1, 0x400ecccc, 0xccccccc0},
-{31,0,123,__LINE__, 0x3fff6a63, 0xd7d03ae2, 0x400f3333, 0x33333326},
-{31,0,123,__LINE__, 0x3fffb5ab, 0x20b5ec8e, 0x400f9999, 0x9999998c},
-{31,0,123,__LINE__, 0x3fffffff, 0xfffffff6, 0x400fffff, 0xfffffff2},
-{31,0,123,__LINE__, 0x400024b4, 0x3dc5d75a, 0x40103333, 0x3333332c},
-{31,0,123,__LINE__, 0x400048f5, 0x3039fe25, 0x40106666, 0x6666665f},
-{31,0,123,__LINE__, 0x40006cc5, 0xa2e92014, 0x40109999, 0x99999992},
-{31,0,123,__LINE__, 0x40009028, 0x47aa3f6a, 0x4010cccc, 0xccccccc5},
-{31,0,123,__LINE__, 0x4000b31f, 0xb7d64893, 0x4010ffff, 0xfffffff8},
-{31,0,123,__LINE__, 0x4000d5ae, 0x756d6cdd, 0x40113333, 0x3333332b},
-{31,0,123,__LINE__, 0x4000f7d6, 0xec2b87f4, 0x40116666, 0x6666665e},
-{31,0,123,__LINE__, 0x4001199b, 0x728cb9cb, 0x40119999, 0x99999991},
-{31,0,123,__LINE__, 0x40013afe, 0x4ac34723, 0x4011cccc, 0xccccccc4},
-{31,0,123,__LINE__, 0x40015c01, 0xa39fbd63, 0x4011ffff, 0xfffffff7},
-{31,0,123,__LINE__, 0x40017ca7, 0x996c42e9, 0x40123333, 0x3333332a},
-{31,0,123,__LINE__, 0x40019cf2, 0x36bbeb32, 0x40126666, 0x6666665d},
-{31,0,123,__LINE__, 0x4001bce3, 0x752ed5da, 0x40129999, 0x99999990},
-{31,0,123,__LINE__, 0x4001dc7d, 0x3e2bd08c, 0x4012cccc, 0xccccccc3},
-{31,0,123,__LINE__, 0x4001fbc1, 0x6b90267a, 0x4012ffff, 0xfffffff6},
-{31,0,123,__LINE__, 0x40021ab1, 0xc8563b3d, 0x40133333, 0x33333329},
-{31,0,123,__LINE__, 0x40023950, 0x113383b2, 0x40136666, 0x6666665c},
-{31,0,123,__LINE__, 0x4002579d, 0xf52e64e2, 0x40139999, 0x9999998f},
-{31,0,123,__LINE__, 0x4002759d, 0x162c7733, 0x4013cccc, 0xccccccc2},
-{31,0,123,__LINE__, 0x4002934f, 0x0979a36b, 0x4013ffff, 0xfffffff5},
-{31,0,123,__LINE__, 0x4002b0b5, 0x584886c6, 0x40143333, 0x33333328},
-{31,0,123,__LINE__, 0x4002cdd1, 0x802c83d5, 0x40146666, 0x6666665b},
-{31,0,123,__LINE__, 0x4002eaa4, 0xf38ddef4, 0x40149999, 0x9999998e},
-{31,0,123,__LINE__, 0x40030731, 0x1a183ebb, 0x4014cccc, 0xccccccc1},
-{31,0,123,__LINE__, 0x40032377, 0x5123e2da, 0x4014ffff, 0xfffffff4},
-{31,0,123,__LINE__, 0x40033f78, 0xec19de5d, 0x40153333, 0x33333327},
-{31,0,123,__LINE__, 0x40035b37, 0x34d39d41, 0x40156666, 0x6666665a},
-{31,0,123,__LINE__, 0x400376b3, 0x6bf5f8a4, 0x40159999, 0x9999998d},
-{31,0,123,__LINE__, 0x400391ee, 0xc948186b, 0x4015cccc, 0xccccccc0},
-{31,0,123,__LINE__, 0x4003acea, 0x7c065d3b, 0x4015ffff, 0xfffffff3},
-{31,0,123,__LINE__, 0x4003c7a7, 0xab318a05, 0x40163333, 0x33333326},
-{31,0,123,__LINE__, 0x4003e227, 0x75da60b4, 0x40166666, 0x66666659},
-{31,0,123,__LINE__, 0x4003fc6a, 0xf369e28f, 0x40169999, 0x9999998c},
-{31,0,123,__LINE__, 0x40041673, 0x33e661bc, 0x4016cccc, 0xccccccbf},
-{31,0,123,__LINE__, 0x40043041, 0x40358ea2, 0x4016ffff, 0xfffffff2},
-{31,0,123,__LINE__, 0x400449d6, 0x1a5ba93e, 0x40173333, 0x33333325},
-{31,0,123,__LINE__, 0x40046332, 0xbdb7fc23, 0x40176666, 0x66666658},
-{31,0,123,__LINE__, 0x40047c58, 0x1f3ec49d, 0x40179999, 0x9999998b},
-{31,0,123,__LINE__, 0x40049547, 0x2db0a94d, 0x4017cccc, 0xccccccbe},
-{31,0,123,__LINE__, 0x4004ae00, 0xd1cfdead, 0x4017ffff, 0xfffffff1},
-{31,0,123,__LINE__, 0x4004c685, 0xee93170b, 0x40183333, 0x33333324},
-{31,0,123,__LINE__, 0x4004ded7, 0x615659e2, 0x40186666, 0x66666657},
-{31,0,123,__LINE__, 0x4004f6f6, 0x0209dcd7, 0x40189999, 0x9999998a},
-{31,0,123,__LINE__, 0x40050ee2, 0xa35ef724, 0x4018cccc, 0xccccccbd},
-{31,0,123,__LINE__, 0x4005269e, 0x12f346dc, 0x4018ffff, 0xfffffff0},
-{31,0,123,__LINE__, 0x40053e29, 0x197a1e1c, 0x40193333, 0x33333323},
-{31,0,123,__LINE__, 0x40055584, 0x7ae44d14, 0x40196666, 0x66666656},
-{31,0,123,__LINE__, 0x40056cb0, 0xf6865c87, 0x40199999, 0x99999989},
-{31,0,123,__LINE__, 0x400583af, 0x473d4b90, 0x4019cccc, 0xccccccbc},
-{31,0,123,__LINE__, 0x40059a80, 0x2391e22c, 0x4019ffff, 0xffffffef},
-{31,0,123,__LINE__, 0x4005b124, 0x3ddaa957, 0x401a3333, 0x33333322},
-{31,0,123,__LINE__, 0x4005c79c, 0x445c987d, 0x401a6666, 0x66666655},
-{31,0,123,__LINE__, 0x4005dde8, 0xe16a8734, 0x401a9999, 0x99999988},
-{31,0,123,__LINE__, 0x4005f40a, 0xbb837184, 0x401acccc, 0xccccccbb},
-{31,0,123,__LINE__, 0x40060a02, 0x756f9c15, 0x401affff, 0xffffffee},
-{31,0,123,__LINE__, 0x40061fd0, 0xae5ca520, 0x401b3333, 0x33333321},
-{31,0,123,__LINE__, 0x40063576, 0x01f88e22, 0x401b6666, 0x66666654},
-{31,0,123,__LINE__, 0x40064af3, 0x088bc9e4, 0x401b9999, 0x99999987},
-{31,0,123,__LINE__, 0x40066048, 0x571259b4, 0x401bcccc, 0xccccccba},
-{31,0,123,__LINE__, 0x40067576, 0x7f540425, 0x401bffff, 0xffffffed},
-{31,0,123,__LINE__, 0x40068a7e, 0x0ffbaf3e, 0x401c3333, 0x33333320},
-{31,0,123,__LINE__, 0x40069f5f, 0x94ade768, 0x401c6666, 0x66666653},
-{31,0,123,__LINE__, 0x4006b41b, 0x961e9bfc, 0x401c9999, 0x99999986},
-{31,0,123,__LINE__, 0x4006c8b2, 0x9a2619ef, 0x401ccccc, 0xccccccb9},
-{31,0,123,__LINE__, 0x4006dd25, 0x23d54cae, 0x401cffff, 0xffffffec},
-{31,0,123,__LINE__, 0x4006f173, 0xb3894cc2, 0x401d3333, 0x3333331f},
-{31,0,123,__LINE__, 0x4007059e, 0xc6fe4395, 0x401d6666, 0x66666652},
-{31,0,123,__LINE__, 0x400719a6, 0xd961ab50, 0x401d9999, 0x99999985},
-{31,0,123,__LINE__, 0x40072d8c, 0x6363f166, 0x401dcccc, 0xccccccb8},
-{31,0,123,__LINE__, 0x4007414f, 0xdb49821e, 0x401dffff, 0xffffffeb},
-{31,0,123,__LINE__, 0x400754f1, 0xb4fb432b, 0x401e3333, 0x3333331e},
-{31,0,123,__LINE__, 0x40076872, 0x62168307, 0x401e6666, 0x66666651},
-{31,0,123,__LINE__, 0x40077bd2, 0x51fc6288, 0x401e9999, 0x99999984},
-{31,0,123,__LINE__, 0x40078f11, 0xf1e0bdf5, 0x401ecccc, 0xccccccb7},
-{31,0,123,__LINE__, 0x4007a231, 0xacd89a94, 0x401effff, 0xffffffea},
-{31,0,123,__LINE__, 0x4007b531, 0xebe81d6e, 0x401f3333, 0x3333331d},
-{31,0,123,__LINE__, 0x4007c813, 0x16100fdc, 0x401f6666, 0x66666650},
-{31,0,123,__LINE__, 0x4007dad5, 0x905af644, 0x401f9999, 0x99999983},
-{31,0,123,__LINE__, 0x4007ed79, 0xbde9bd0f, 0x401fcccc, 0xccccccb6},
-{31,0,123,__LINE__, 0x4007ffff, 0xfffffff8, 0x401fffff, 0xffffffe9},
-{31,0,123,__LINE__, 0x40081268, 0xb60fef5d, 0x40201999, 0x9999998e},
-{31,0,123,__LINE__, 0x400824b4, 0x3dc5d758, 0x40203333, 0x33333328},
-{31,0,123,__LINE__, 0x400836e2, 0xf3134bfc, 0x40204ccc, 0xccccccc2},
-{31,0,123,__LINE__, 0x400848f5, 0x3039fe23, 0x40206666, 0x6666665c},
-{31,0,123,__LINE__, 0x40085aeb, 0x4dd63bef, 0x40207fff, 0xfffffff6},
-{31,0,123,__LINE__, 0x40086cc5, 0xa2e92012, 0x40209999, 0x99999990},
-{31,0,123,__LINE__, 0x40087e84, 0x84e272cd, 0x4020b333, 0x3333332a},
-{31,0,123,__LINE__, 0x40089028, 0x47aa3f6a, 0x4020cccc, 0xccccccc4},
-{31,0,123,__LINE__, 0x4008a1b1, 0x3daa20ef, 0x4020e666, 0x6666665e},
-{31,0,123,__LINE__, 0x4008b31f, 0xb7d64893, 0x4020ffff, 0xfffffff8},
-{31,0,123,__LINE__, 0x4008c474, 0x05b64073, 0x40211999, 0x99999992},
-{31,0,123,__LINE__, 0x4008d5ae, 0x756d6cde, 0x40213333, 0x3333332c},
-{31,0,123,__LINE__, 0x4008e6cf, 0x53c34e90, 0x40214ccc, 0xccccccc6},
-{31,0,123,__LINE__, 0x4008f7d6, 0xec2b87f5, 0x40216666, 0x66666660},
-{31,0,123,__LINE__, 0x400908c5, 0x88cda79a, 0x40217fff, 0xfffffffa},
-{31,0,123,__LINE__, 0x4009199b, 0x728cb9cd, 0x40219999, 0x99999994},
-{31,0,123,__LINE__, 0x40092a58, 0xf10ea355, 0x4021b333, 0x3333332e},
-{31,0,123,__LINE__, 0x40093afe, 0x4ac34726, 0x4021cccc, 0xccccccc8},
-{31,0,123,__LINE__, 0x40094b8b, 0xc4eb78d0, 0x4021e666, 0x66666662},
-{31,0,123,__LINE__, 0x40095c01, 0xa39fbd66, 0x4021ffff, 0xfffffffc},
-{31,0,123,__LINE__, 0x40096c60, 0x29d6dc80, 0x40221999, 0x99999996},
-{31,0,123,__LINE__, 0x40097ca7, 0x996c42ec, 0x40223333, 0x33333330},
-{31,0,123,__LINE__, 0x40098cd8, 0x3326389c, 0x40224ccc, 0xccccccca},
-{31,0,123,__LINE__, 0x40099cf2, 0x36bbeb37, 0x40226666, 0x66666664},
-{31,0,123,__LINE__, 0x4009acf5, 0xe2db4ec8, 0x40227fff, 0xfffffffe},
-{31,0,123,__LINE__, 0x4009bce3, 0x752ed5de, 0x40229999, 0x99999998},
-{31,0,123,__LINE__, 0x4009ccbb, 0x2a630268, 0x4022b333, 0x33333332},
-{31,0,123,__LINE__, 0x4009dc7d, 0x3e2bd092, 0x4022cccc, 0xcccccccc},
-{31,0,123,__LINE__, 0x4009ec29, 0xeb49fcd8, 0x4022e666, 0x66666666},
-{31,0,123,__LINE__, 0x4009fbc1, 0x6b902681, 0x40230000, 0x00000000},
-{31,0,123,__LINE__, 0x400a0b43, 0xf7e7cf8d, 0x40231999, 0x9999999a},
-{31,0,123,__LINE__, 0x400a1ab1, 0xc8563b43, 0x40233333, 0x33333334},
-{31,0,123,__LINE__, 0x400a2a0b, 0x14012c59, 0x40234ccc, 0xccccccce},
-{31,0,123,__LINE__, 0x400a3950, 0x113383b9, 0x40236666, 0x66666668},
-{31,0,123,__LINE__, 0x400a4880, 0xf561c0e8, 0x40238000, 0x00000002},
-{31,0,123,__LINE__, 0x400a579d, 0xf52e64ea, 0x40239999, 0x9999999c},
-{31,0,123,__LINE__, 0x400a66a7, 0x446e3896, 0x4023b333, 0x33333336},
-{31,0,123,__LINE__, 0x400a759d, 0x162c773b, 0x4023cccc, 0xccccccd0},
-{31,0,123,__LINE__, 0x400a847f, 0x9caede5f, 0x4023e666, 0x6666666a},
-{31,0,123,__LINE__, 0x400a934f, 0x0979a374, 0x40240000, 0x00000004},
-{31,0,123,__LINE__, 0x400aa20b, 0x8d535042, 0x40241999, 0x9999999e},
-{31,0,123,__LINE__, 0x400ab0b5, 0x584886d0, 0x40243333, 0x33333338},
-{31,0,123,__LINE__, 0x400abf4c, 0x99afad75, 0x40244ccc, 0xccccccd2},
-{31,0,123,__LINE__, 0x400acdd1, 0x802c83df, 0x40246666, 0x6666666c},
-{31,0,123,__LINE__, 0x400adc44, 0x39b3a19f, 0x40248000, 0x00000006},
-{31,0,123,__LINE__, 0x400aeaa4, 0xf38ddefe, 0x40249999, 0x999999a0},
-{31,0,123,__LINE__, 0x400af8f3, 0xda5ba8a4, 0x4024b333, 0x3333333a},
-{31,0,123,__LINE__, 0x400b0731, 0x1a183ec6, 0x4024cccc, 0xccccccd4},
-{31,0,123,__LINE__, 0x400b155c, 0xde1ce055, 0x4024e666, 0x6666666e},
-{31,0,123,__LINE__, 0x400b2377, 0x5123e2e5, 0x40250000, 0x00000008},
-{31,0,123,__LINE__, 0x400b3180, 0x9d4bb7b2, 0x40251999, 0x999999a2},
-{31,0,123,__LINE__, 0x400b3f78, 0xec19de68, 0x40253333, 0x3333333c},
-{31,0,123,__LINE__, 0x400b4d60, 0x667dc62a, 0x40254ccc, 0xccccccd6},
-{31,0,123,__LINE__, 0x400b5b37, 0x34d39d4d, 0x40256666, 0x66666670},
-{31,0,123,__LINE__, 0x400b68fd, 0x7ee71059, 0x40258000, 0x0000000a},
-{31,0,123,__LINE__, 0x400b76b3, 0x6bf5f8b1, 0x40259999, 0x999999a4},
-{31,0,123,__LINE__, 0x400b8459, 0x22b2fb5e, 0x4025b333, 0x3333333e},
-{31,0,123,__LINE__, 0x400b91ee, 0xc9481877, 0x4025cccc, 0xccccccd8},
-{31,0,123,__LINE__, 0x400b9f74, 0x85592b84, 0x4025e666, 0x66666672},
-{31,0,123,__LINE__, 0x400bacea, 0x7c065d48, 0x40260000, 0x0000000c},
-{31,0,123,__LINE__, 0x400bba50, 0xd1ee8761, 0x40261999, 0x999999a6},
-{31,0,123,__LINE__, 0x400bc7a7, 0xab318a13, 0x40263333, 0x33333340},
-{31,0,123,__LINE__, 0x400bd4ef, 0x2b7294aa, 0x40264ccc, 0xccccccda},
-{31,0,123,__LINE__, 0x400be227, 0x75da60c2, 0x40266666, 0x66666674},
-{31,0,123,__LINE__, 0x400bef50, 0xad1960e1, 0x40268000, 0x0000000e},
-{31,0,123,__LINE__, 0x400bfc6a, 0xf369e29e, 0x40269999, 0x999999a8},
-{31,0,123,__LINE__, 0x400c0976, 0x6a9224c8, 0x4026b333, 0x33333342},
-{31,0,123,__LINE__, 0x400c1673, 0x33e661cb, 0x4026cccc, 0xccccccdc},
-{31,0,123,__LINE__, 0x400c2361, 0x704acea3, 0x4026e666, 0x66666676},
-{31,0,123,__LINE__, 0x400c3041, 0x40358eb2, 0x40270000, 0x00000010},
-{31,0,123,__LINE__, 0x400c3d12, 0xc3b09cba, 0x40271999, 0x999999aa},
-{31,0,123,__LINE__, 0x400c49d6, 0x1a5ba94e, 0x40273333, 0x33333344},
-{31,0,123,__LINE__, 0x400c568b, 0x636deef0, 0x40274ccc, 0xccccccde},
-{31,0,123,__LINE__, 0x400c6332, 0xbdb7fc33, 0x40276666, 0x66666678},
-{31,0,123,__LINE__, 0x400c6fcc, 0x47a5740c, 0x40278000, 0x00000012},
-{31,0,123,__LINE__, 0x400c7c58, 0x1f3ec4ad, 0x40279999, 0x999999ac},
-{31,0,123,__LINE__, 0x400c88d6, 0x622ad50a, 0x4027b333, 0x33333346},
-{31,0,123,__LINE__, 0x400c9547, 0x2db0a95e, 0x4027cccc, 0xcccccce0},
-{31,0,123,__LINE__, 0x400ca1aa, 0x9eb8feda, 0x4027e666, 0x6666667a},
-{31,0,123,__LINE__, 0x400cae00, 0xd1cfdebe, 0x40280000, 0x00000014},
-{31,0,123,__LINE__, 0x400cba49, 0xe326290e, 0x40281999, 0x999999ae},
-{31,0,123,__LINE__, 0x400cc685, 0xee93171c, 0x40283333, 0x33333348},
-{31,0,123,__LINE__, 0x400cd2b5, 0x0f95b61e, 0x40284ccc, 0xcccccce2},
-{31,0,123,__LINE__, 0x400cded7, 0x615659f4, 0x40286666, 0x6666667c},
-{31,0,123,__LINE__, 0x400ceaec, 0xfea80864, 0x40288000, 0x00000016},
-{31,0,123,__LINE__, 0x400cf6f6, 0x0209dce9, 0x40289999, 0x999999b0},
-{31,0,123,__LINE__, 0x400d02f2, 0x85a8654d, 0x4028b333, 0x3333334a},
-{31,0,123,__LINE__, 0x400d0ee2, 0xa35ef736, 0x4028cccc, 0xcccccce4},
-{31,0,123,__LINE__, 0x400d1ac6, 0x74b8fed8, 0x4028e666, 0x6666667e},
-{31,0,123,__LINE__, 0x400d269e, 0x12f346ee, 0x40290000, 0x00000018},
-{31,0,123,__LINE__, 0x400d3269, 0x96fd3a26, 0x40291999, 0x999999b2},
-{31,0,123,__LINE__, 0x400d3e29, 0x197a1e2f, 0x40293333, 0x3333334c},
-{31,0,123,__LINE__, 0x400d49dc, 0xb2c24886, 0x40294ccc, 0xcccccce6},
-{31,0,123,__LINE__, 0x400d5584, 0x7ae44d27, 0x40296666, 0x66666680},
-{31,0,123,__LINE__, 0x400d6120, 0x89a62759, 0x40298000, 0x0000001a},
-{31,0,123,__LINE__, 0x400d6cb0, 0xf6865c9a, 0x40299999, 0x999999b4},
-{31,0,123,__LINE__, 0x400d7835, 0xd8bd19f1, 0x4029b333, 0x3333334e},
-{31,0,123,__LINE__, 0x400d83af, 0x473d4ba3, 0x4029cccc, 0xcccccce8},
-{31,0,123,__LINE__, 0x400d8f1d, 0x58b5af91, 0x4029e666, 0x66666682},
-{31,0,123,__LINE__, 0x400d9a80, 0x2391e240, 0x402a0000, 0x0000001c},
-{31,0,123,__LINE__, 0x400da5d7, 0xbdfb66ba, 0x402a1999, 0x999999b6},
-{31,0,123,__LINE__, 0x400db124, 0x3ddaa96c, 0x402a3333, 0x33333350},
-{31,0,123,__LINE__, 0x400dbc65, 0xb8d7fe04, 0x402a4ccc, 0xccccccea},
-{31,0,123,__LINE__, 0x400dc79c, 0x445c9892, 0x402a6666, 0x66666684},
-{31,0,123,__LINE__, 0x400dd2c7, 0xf59381e2, 0x402a8000, 0x0000001e},
-{31,0,123,__LINE__, 0x400ddde8, 0xe16a8749, 0x402a9999, 0x999999b8},
-{31,0,123,__LINE__, 0x400de8ff, 0x1c9325ea, 0x402ab333, 0x33333352},
-{31,0,123,__LINE__, 0x400df40a, 0xbb837199, 0x402acccc, 0xccccccec},
-{31,0,123,__LINE__, 0x400dff0b, 0xd276f76e, 0x402ae666, 0x66666686},
-{31,0,123,__LINE__, 0x400e0a02, 0x756f9c2a, 0x402b0000, 0x00000020},
-{31,0,123,__LINE__, 0x400e14ee, 0xb836767a, 0x402b1999, 0x999999ba},
-{31,0,123,__LINE__, 0x400e1fd0, 0xae5ca535, 0x402b3333, 0x33333354},
-{31,0,123,__LINE__, 0x400e2aa8, 0x6b3c21b1, 0x402b4ccc, 0xccccccee},
-{31,0,123,__LINE__, 0x400e3576, 0x01f88e38, 0x402b6666, 0x66666688},
-{31,0,123,__LINE__, 0x400e4039, 0x858000c2, 0x402b8000, 0x00000022},
-{31,0,123,__LINE__, 0x400e4af3, 0x088bc9fb, 0x402b9999, 0x999999bc},
-{31,0,123,__LINE__, 0x400e55a2, 0x9da138b4, 0x402bb333, 0x33333356},
-{31,0,123,__LINE__, 0x400e6048, 0x571259cb, 0x402bcccc, 0xccccccf0},
-{31,0,123,__LINE__, 0x400e6ae4, 0x46feb4a2, 0x402be666, 0x6666668a},
-{31,0,123,__LINE__, 0x400e7576, 0x7f54043c, 0x402c0000, 0x00000024},
-{31,0,123,__LINE__, 0x400e7fff, 0x11ceed00, 0x402c1999, 0x999999be},
-{31,0,123,__LINE__, 0x400e8a7e, 0x0ffbaf56, 0x402c3333, 0x33333358},
-{31,0,123,__LINE__, 0x400e94f3, 0x8b36d702, 0x402c4ccc, 0xccccccf2},
-{31,0,123,__LINE__, 0x400e9f5f, 0x94ade780, 0x402c6666, 0x6666668c},
-{31,0,123,__LINE__, 0x400ea9c2, 0x3d600544, 0x402c8000, 0x00000026},
-{31,0,123,__LINE__, 0x400eb41b, 0x961e9c13, 0x402c9999, 0x999999c0},
-{31,0,123,__LINE__, 0x400ebe6b, 0xaf8e0267, 0x402cb333, 0x3333335a},
-{31,0,123,__LINE__, 0x400ec8b2, 0x9a261a07, 0x402ccccc, 0xccccccf4},
-{31,0,123,__LINE__, 0x400ed2f0, 0x6632edd0, 0x402ce666, 0x6666668e},
-{31,0,123,__LINE__, 0x400edd25, 0x23d54cc6, 0x402d0000, 0x00000028},
-{31,0,123,__LINE__, 0x400ee750, 0xe303627d, 0x402d1999, 0x999999c2},
-{31,0,123,__LINE__, 0x400ef173, 0xb3894cda, 0x402d3333, 0x3333335c},
-{31,0,123,__LINE__, 0x400efb8d, 0xa509af56, 0x402d4ccc, 0xccccccf6},
-{31,0,123,__LINE__, 0x400f059e, 0xc6fe43ad, 0x402d6666, 0x66666690},
-{31,0,123,__LINE__, 0x400f0fa7, 0x28b86826, 0x402d8000, 0x0000002a},
-{31,0,123,__LINE__, 0x400f19a6, 0xd961ab68, 0x402d9999, 0x999999c4},
-{31,0,123,__LINE__, 0x400f239d, 0xe7fc55fe, 0x402db333, 0x3333335e},
-{31,0,123,__LINE__, 0x400f2d8c, 0x6363f17e, 0x402dcccc, 0xccccccf8},
-{31,0,123,__LINE__, 0x400f3772, 0x5a4dcd7c, 0x402de666, 0x66666692},
-{31,0,123,__LINE__, 0x400f414f, 0xdb498236, 0x402e0000, 0x0000002c},
-{31,0,123,__LINE__, 0x400f4b24, 0xf4c17120, 0x402e1999, 0x999999c6},
-{31,0,123,__LINE__, 0x400f54f1, 0xb4fb4344, 0x402e3333, 0x33333360},
-{31,0,123,__LINE__, 0x400f5eb6, 0x2a186592, 0x402e4ccc, 0xccccccfa},
-{31,0,123,__LINE__, 0x400f6872, 0x62168321, 0x402e6666, 0x66666694},
-{31,0,123,__LINE__, 0x400f7226, 0x6acffd6c, 0x402e8000, 0x0000002e},
-{31,0,123,__LINE__, 0x400f7bd2, 0x51fc62a1, 0x402e9999, 0x999999c8},
-{31,0,123,__LINE__, 0x400f8576, 0x2530e1f2, 0x402eb333, 0x33333362},
-{31,0,123,__LINE__, 0x400f8f11, 0xf1e0be0f, 0x402ecccc, 0xccccccfc},
-{31,0,123,__LINE__, 0x400f98a5, 0xc55dbdc0, 0x402ee666, 0x66666696},
-{31,0,123,__LINE__, 0x400fa231, 0xacd89aae, 0x402f0000, 0x00000030},
-{31,0,123,__LINE__, 0x400fabb5, 0xb5616e63, 0x402f1999, 0x999999ca},
-{31,0,123,__LINE__, 0x400fb531, 0xebe81d88, 0x402f3333, 0x33333364},
-{31,0,123,__LINE__, 0x400fbea6, 0x5d3cc171, 0x402f4ccc, 0xccccccfe},
-{31,0,123,__LINE__, 0x400fc813, 0x16100ff7, 0x402f6666, 0x66666698},
-{31,0,123,__LINE__, 0x400fd178, 0x22f3c1a8, 0x402f8000, 0x00000032},
-{31,0,123,__LINE__, 0x400fdad5, 0x905af65f, 0x402f9999, 0x999999cc},
-{31,0,123,__LINE__, 0x400fe42b, 0x6a9a9840, 0x402fb333, 0x33333366},
-{31,0,123,__LINE__, 0x400fed79, 0xbde9bd2a, 0x402fcccc, 0xcccccd00},
-{31,0,123,__LINE__, 0x400ff6c0, 0x9662069a, 0x402fe666, 0x6666669a},
-{31,0,123,__LINE__, 0x40100000, 0x00000009, 0x40300000, 0x0000001a},
-{31,0,123,__LINE__, 0x4010049c, 0x0351be07, 0x40300ccc, 0xcccccce7},
-{31,0,123,__LINE__, 0x40100934, 0x5b07f7bc, 0x40301999, 0x999999b4},
-{31,0,123,__LINE__, 0x40100dc9, 0x0cf665dd, 0x40302666, 0x66666681},
-{31,0,123,__LINE__, 0x4010125a, 0x1ee2ebb9, 0x40303333, 0x3333334e},
-{31,0,123,__LINE__, 0x401016e7, 0x9685c2dc, 0x40304000, 0x0000001b},
-{31,0,123,__LINE__, 0x40101b71, 0x7989a60b, 0x40304ccc, 0xcccccce8},
-{31,0,123,__LINE__, 0x40101ff7, 0xcd8bfb9d, 0x40305999, 0x999999b5},
-{31,0,123,__LINE__, 0x4010247a, 0x981cff1f, 0x40306666, 0x66666682},
-{31,0,123,__LINE__, 0x401028f9, 0xdebfea69, 0x40307333, 0x3333334f},
-{31,0,123,__LINE__, 0x40102d75, 0xa6eb1e05, 0x40308000, 0x0000001c},
-{31,0,123,__LINE__, 0x401031ed, 0xf60848fd, 0x40308ccc, 0xcccccce9},
-{31,0,123,__LINE__, 0x40103662, 0xd1749016, 0x40309999, 0x999999b6},
-{31,0,123,__LINE__, 0x40103ad4, 0x3e80b46a, 0x4030a666, 0x66666683},
-{31,0,123,__LINE__, 0x40103f42, 0x42713974, 0x4030b333, 0x33333350},
-{31,0,123,__LINE__, 0x401043ac, 0xe27e8a88, 0x4030c000, 0x0000001d},
-{31,0,123,__LINE__, 0x40104814, 0x23d51fc2, 0x4030cccc, 0xccccccea},
-{31,0,123,__LINE__, 0x40104c78, 0x0b95a25b, 0x4030d999, 0x999999b7},
-{31,0,123,__LINE__, 0x401050d8, 0x9ed51084, 0x4030e666, 0x66666684},
-{31,0,123,__LINE__, 0x40105535, 0xe29ce0af, 0x4030f333, 0x33333351},
-{31,0,123,__LINE__, 0x4010598f, 0xdbeb2457, 0x40310000, 0x0000001e},
-{31,0,123,__LINE__, 0x40105de6, 0x8fb2aa41, 0x40310ccc, 0xcccccceb},
-{31,0,123,__LINE__, 0x4010623a, 0x02db2046, 0x40311999, 0x999999b8},
-{31,0,123,__LINE__, 0x4010668a, 0x3a413495, 0x40312666, 0x66666685},
-{31,0,123,__LINE__, 0x40106ad7, 0x3ab6b67c, 0x40313333, 0x33333352},
-{31,0,123,__LINE__, 0x40106f21, 0x0902b6b9, 0x40314000, 0x0000001f},
-{31,0,123,__LINE__, 0x40107367, 0xa9e1a755, 0x40314ccc, 0xccccccec},
-{31,0,123,__LINE__, 0x401077ab, 0x22057b00, 0x40315999, 0x999999b9},
-{31,0,123,__LINE__, 0x40107beb, 0x7615c407, 0x40316666, 0x66666686},
-{31,0,123,__LINE__, 0x40108028, 0xaaafd2cd, 0x40317333, 0x33333353},
-{31,0,123,__LINE__, 0x40108462, 0xc466d3da, 0x40318000, 0x00000020},
-{31,0,123,__LINE__, 0x40108899, 0xc7c3ed7a, 0x40318ccc, 0xcccccced},
-{31,0,123,__LINE__, 0x40108ccd, 0xb9465cf3, 0x40319999, 0x999999ba},
-{31,0,123,__LINE__, 0x401090fe, 0x9d63934e, 0x4031a666, 0x66666687},
-{31,0,123,__LINE__, 0x4010952c, 0x788751b7, 0x4031b333, 0x33333354},
-{31,0,123,__LINE__, 0x40109957, 0x4f13c57c, 0x4031c000, 0x00000021},
-{31,0,123,__LINE__, 0x40109d7f, 0x2561a39f, 0x4031cccc, 0xccccccee},
-{31,0,123,__LINE__, 0x4010a1a3, 0xffc0440f, 0x4031d999, 0x999999bb},
-{31,0,123,__LINE__, 0x4010a5c5, 0xe275bc74, 0x4031e666, 0x66666688},
-{31,0,123,__LINE__, 0x4010a9e4, 0xd1befaa6, 0x4031f333, 0x33333355},
-{31,0,123,__LINE__, 0x4010ae00, 0xd1cfdebf, 0x40320000, 0x00000022},
-{31,0,123,__LINE__, 0x4010b219, 0xe6d354d3, 0x40320ccc, 0xccccccef},
-{31,0,123,__LINE__, 0x4010b630, 0x14eb6e4c, 0x40321999, 0x999999bc},
-{31,0,123,__LINE__, 0x4010ba43, 0x60317aee, 0x40322666, 0x66666689},
-{31,0,123,__LINE__, 0x4010be53, 0xccb62182, 0x40323333, 0x33333356},
-{31,0,123,__LINE__, 0x4010c261, 0x5e817829, 0x40324000, 0x00000023},
-{31,0,123,__LINE__, 0x4010c66c, 0x19931c5a, 0x40324ccc, 0xccccccf0},
-{31,0,123,__LINE__, 0x4010ca74, 0x01e24a92, 0x40325999, 0x999999bd},
-{31,0,123,__LINE__, 0x4010ce79, 0x1b5df5a7, 0x40326666, 0x6666668a},
-{31,0,123,__LINE__, 0x4010d27b, 0x69ecddd5, 0x40327333, 0x33333357},
-{31,0,123,__LINE__, 0x4010d67a, 0xf16da770, 0x40328000, 0x00000024},
-{31,0,123,__LINE__, 0x4010da77, 0xb5b6f153, 0x40328ccc, 0xccccccf1},
-{31,0,123,__LINE__, 0x4010de71, 0xba976afb, 0x40329999, 0x999999be},
-{31,0,123,__LINE__, 0x4010e269, 0x03d5ea53, 0x4032a666, 0x6666668b},
-{31,0,123,__LINE__, 0x4010e65d, 0x95318140, 0x4032b333, 0x33333358},
-{31,0,123,__LINE__, 0x4010ea4f, 0x726192d7, 0x4032c000, 0x00000025},
-{31,0,123,__LINE__, 0x4010ee3e, 0x9f15e854, 0x4032cccc, 0xccccccf2},
-{31,0,123,__LINE__, 0x4010f22b, 0x1ef6c5c8, 0x4032d999, 0x999999bf},
-{31,0,123,__LINE__, 0x4010f614, 0xf5a4fe78, 0x4032e666, 0x6666668c},
-{31,0,123,__LINE__, 0x4010f9fc, 0x26ba0906, 0x4032f333, 0x33333359},
-{31,0,123,__LINE__, 0x4010fde0, 0xb5c8134c, 0x40330000, 0x00000026},
-{31,0,123,__LINE__, 0x401101c2, 0xa65a15f3, 0x40330ccc, 0xccccccf3},
-{31,0,123,__LINE__, 0x401105a1, 0xfbf3e7d2, 0x40331999, 0x999999c0},
-{31,0,123,__LINE__, 0x4011097e, 0xba1250ff, 0x40332666, 0x6666668d},
-{31,0,123,__LINE__, 0x40110d58, 0xe42b1dad, 0x40333333, 0x3333335a},
-{31,0,123,__LINE__, 0x40111130, 0x7dad30c3, 0x40334000, 0x00000027},
-{31,0,123,__LINE__, 0x40111505, 0x8a009638, 0x40334ccc, 0xccccccf4},
-{31,0,123,__LINE__, 0x401118d8, 0x0c869531, 0x40335999, 0x999999c1},
-{31,0,123,__LINE__, 0x40111ca8, 0x0899c1e8, 0x40336666, 0x6666668e},
-{31,0,123,__LINE__, 0x40112075, 0x818e0f4e, 0x40337333, 0x3333335b},
-{31,0,123,__LINE__, 0x40112440, 0x7ab0e07f, 0x40338000, 0x00000028},
-{31,0,123,__LINE__, 0x40112808, 0xf74919f4, 0x40338ccc, 0xccccccf5},
-{31,0,123,__LINE__, 0x40112bce, 0xfa973280, 0x40339999, 0x999999c2},
-{31,0,123,__LINE__, 0x40112f92, 0x87d54416, 0x4033a666, 0x6666668f},
-{31,0,123,__LINE__, 0x40113353, 0xa2371c56, 0x4033b333, 0x3333335c},
-{31,0,123,__LINE__, 0x40113712, 0x4cea4ceb, 0x4033c000, 0x00000029},
-{31,0,123,__LINE__, 0x40113ace, 0x8b163ba8, 0x4033cccc, 0xccccccf6},
-{31,0,123,__LINE__, 0x40113e88, 0x5fdc3280, 0x4033d999, 0x999999c3},
-{31,0,123,__LINE__, 0x4011423f, 0xce576f3a, 0x4033e666, 0x66666690},
-{31,0,123,__LINE__, 0x401145f4, 0xd99d3304, 0x4033f333, 0x3333335d},
-0,};
-test_log2f(m)   {run_vector_1(m,log2f_vec,(char *)(log2f),"log2f","ff");   }	
diff --git a/newlib/libm/test/log_vec.c b/newlib/libm/test/log_vec.c
deleted file mode 100644
index 894b75434..000000000
--- a/newlib/libm/test/log_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type log_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0xc0414837, 0x1bfcbfb9, 0x3cd19000, 0x00000000},			/* -34.5641=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0xc0126bb1, 0xbbb554a8, 0x3f847ae1, 0x47ae16ad},			/* -4.60517=f(0.01000)*/
-{64, 0,123,__LINE__, 0xc00f4bd2, 0xb7ac1b41, 0x3f947ae1, 0x47ae1594},			/* -3.91202=f(0.02000)*/
-{64, 0,123,__LINE__, 0xc00c0d6e, 0x3a14285c, 0x3f9eb851, 0xeb851fd2},			/* -3.50655=f(0.03000)*/
-{64, 0,123,__LINE__, 0xc009c041, 0xf7ed8cfc, 0x3fa47ae1, 0x47ae1508},			/* -3.21887=f(0.04000)*/
-{64, 0,123,__LINE__, 0xc007f742, 0x7b73e365, 0x3fa99999, 0x99999a27},			/* -2.99573=f(0.05000)*/
-{64, 0,123,__LINE__, 0xc00681dd, 0x7a559a05, 0x3faeb851, 0xeb851f46},			/* -2.81341=f(0.06000)*/
-{64, 0,123,__LINE__, 0xc005462a, 0x20517ce0, 0x3fb1eb85, 0x1eb85232},			/* -2.65926=f(0.07000)*/
-{64, 0,123,__LINE__, 0xc00434b1, 0x382efe9c, 0x3fb47ae1, 0x47ae14c1},			/* -2.52572=f(0.08000)*/
-{64, 0,123,__LINE__, 0xc0034378, 0xfcbda708, 0x3fb70a3d, 0x70a3d750},			/* -2.40794=f(0.09000)*/
-{64, 0,123,__LINE__, 0xc0026bb1, 0xbbb55500, 0x3fb99999, 0x999999df},			/* -2.30258=f(0.10000)*/
-{64, 0,123,__LINE__, 0xc001a87f, 0xbfeb72cc, 0x3fbc28f5, 0xc28f5c6e},			/* -2.20727=f(0.11000)*/
-{64, 0,123,__LINE__, 0xc000f64c, 0xba970b9c, 0x3fbeb851, 0xeb851efd},			/* -2.12026=f(0.12000)*/
-{64, 0,123,__LINE__, 0xc000525f, 0x4c391dca, 0x3fc0a3d7, 0x0a3d70c6},			/* -2.04022=f(0.13000)*/
-{64, 0,123,__LINE__, 0xbfff7532, 0xc125dce8, 0x3fc1eb85, 0x1eb8520e},			/* -1.96611=f(0.14000)*/
-{64, 0,123,__LINE__, 0xbffe5a9a, 0x7c3ac3fb, 0x3fc33333, 0x33333356},			/* -1.89712=f(0.15000)*/
-{64, 0,123,__LINE__, 0xbffd5240, 0xf0e0e05c, 0x3fc47ae1, 0x47ae149e},			/* -1.83258=f(0.16000)*/
-{64, 0,123,__LINE__, 0xbffc59ef, 0x6ae05548, 0x3fc5c28f, 0x5c28f5e6},			/* -1.77195=f(0.17000)*/
-{64, 0,123,__LINE__, 0xbffb6fd0, 0x79fe3130, 0x3fc70a3d, 0x70a3d72e},			/* -1.71479=f(0.18000)*/
-{64, 0,123,__LINE__, 0xbffa925a, 0xe2cbede6, 0x3fc851eb, 0x851eb876},			/* -1.66073=f(0.19000)*/
-{64, 0,123,__LINE__, 0xbff9c041, 0xf7ed8d1d, 0x3fc99999, 0x999999be},			/* -1.60943=f(0.20000)*/
-{64, 0,123,__LINE__, 0xbff8f869, 0xc5f5f6de, 0x3fcae147, 0xae147b06},			/* -1.56064=f(0.21000)*/
-{64, 0,123,__LINE__, 0xbff839de, 0x0059c8b2, 0x3fcc28f5, 0xc28f5c4e},			/* -1.51412=f(0.22000)*/
-{64, 0,123,__LINE__, 0xbff783ca, 0xf331ec62, 0x3fcd70a3, 0xd70a3d96},			/* -1.46967=f(0.23000)*/
-{64, 0,123,__LINE__, 0xbff6d577, 0xf5b0fa51, 0x3fceb851, 0xeb851ede},			/* -1.42711=f(0.24000)*/
-{64, 0,123,__LINE__, 0xbff62e42, 0xfefa39dc, 0x3fd00000, 0x00000013},			/* -1.38629=f(0.25000)*/
-{64, 0,123,__LINE__, 0xbff58d9d, 0x18f51eaa, 0x3fd0a3d7, 0x0a3d70b7},			/* -1.34707=f(0.26000)*/
-{64, 0,123,__LINE__, 0xbff4f307, 0x7ece4b24, 0x3fd147ae, 0x147ae15b},			/* -1.30933=f(0.27000)*/
-{64, 0,123,__LINE__, 0xbff45e11, 0x41a8bffe, 0x3fd1eb85, 0x1eb851ff},			/* -1.27296=f(0.28000)*/
-{64, 0,123,__LINE__, 0xbff3ce55, 0x57395808, 0x3fd28f5c, 0x28f5c2a3},			/* -1.23787=f(0.29000)*/
-{64, 0,123,__LINE__, 0xbff34378, 0xfcbda710, 0x3fd33333, 0x33333347},			/* -1.20397=f(0.30000)*/
-{64, 0,123,__LINE__, 0xbff2bd2a, 0x5db2fd92, 0x3fd3d70a, 0x3d70a3eb},			/* -1.17118=f(0.31000)*/
-{64, 0,123,__LINE__, 0xbff23b1f, 0x7163c370, 0x3fd47ae1, 0x47ae148f},			/* -1.13943=f(0.32000)*/
-{64, 0,123,__LINE__, 0xbff1bd15, 0x0529e2a5, 0x3fd51eb8, 0x51eb8533},			/* -1.10866=f(0.33000)*/
-{64, 0,123,__LINE__, 0xbff142cd, 0xeb63385c, 0x3fd5c28f, 0x5c28f5d7},			/* -1.07881=f(0.34000)*/
-{64, 0,123,__LINE__, 0xbff0cc12, 0x48b56cbd, 0x3fd66666, 0x6666667b},			/* -1.04982=f(0.35000)*/
-{64, 0,123,__LINE__, 0xbff058ae, 0xfa811443, 0x3fd70a3d, 0x70a3d71f},			/* -1.02165=f(0.36000)*/
-{64, 0,123,__LINE__, 0xbfefd0ea, 0x24bf899a, 0x3fd7ae14, 0x7ae147c3},			/* -0.99425=f(0.37000)*/
-{64, 0,123,__LINE__, 0xbfeef672, 0xc69da1ef, 0x3fd851eb, 0x851eb867},			/* -0.96758=f(0.38000)*/
-{64, 0,123,__LINE__, 0xbfee21a8, 0x3b8a7138, 0x3fd8f5c2, 0x8f5c290b},			/* -0.94160=f(0.39000)*/
-{64, 0,123,__LINE__, 0xbfed5240, 0xf0e0e05d, 0x3fd99999, 0x999999af},			/* -0.91629=f(0.40000)*/
-{64, 0,123,__LINE__, 0xbfec87f8, 0xc76ff75b, 0x3fda3d70, 0xa3d70a53},			/* -0.89159=f(0.41000)*/
-{64, 0,123,__LINE__, 0xbfebc290, 0x8cf1b3df, 0x3fdae147, 0xae147af7},			/* -0.86750=f(0.42000)*/
-{64, 0,123,__LINE__, 0xbfeb01cd, 0x8556f84e, 0x3fdb851e, 0xb851eb9b},			/* -0.84397=f(0.43000)*/
-{64, 0,123,__LINE__, 0xbfea4579, 0x01b95786, 0x3fdc28f5, 0xc28f5c3f},			/* -0.82098=f(0.44000)*/
-{64, 0,123,__LINE__, 0xbfe98d60, 0x031b8202, 0x3fdccccc, 0xcccccce3},			/* -0.79850=f(0.45000)*/
-{64, 0,123,__LINE__, 0xbfe8d952, 0xe7699ee4, 0x3fdd70a3, 0xd70a3d87},			/* -0.77652=f(0.46000)*/
-{64, 0,123,__LINE__, 0xbfe82925, 0x1f66e5bb, 0x3fde147a, 0xe147ae2b},			/* -0.75502=f(0.47000)*/
-{64, 0,123,__LINE__, 0xbfe77cac, 0xec67bac2, 0x3fdeb851, 0xeb851ecf},			/* -0.73396=f(0.48000)*/
-{64, 0,123,__LINE__, 0xbfe6d3c3, 0x24e13f37, 0x3fdf5c28, 0xf5c28f73},			/* -0.71334=f(0.49000)*/
-{64, 0,123,__LINE__, 0xbfe62e42, 0xfefa39d9, 0x3fe00000, 0x0000000b},			/* -0.69314=f(0.50000)*/
-{64, 0,123,__LINE__, 0xbfe58c09, 0xe066a49a, 0x3fe051eb, 0x851eb85d},			/* -0.67334=f(0.51000)*/
-{64, 0,123,__LINE__, 0xbfe4ecf7, 0x32f00374, 0x3fe0a3d7, 0x0a3d70af},			/* -0.65392=f(0.52000)*/
-{64, 0,123,__LINE__, 0xbfe450ec, 0x3d21b5ec, 0x3fe0f5c2, 0x8f5c2901},			/* -0.63487=f(0.53000)*/
-{64, 0,123,__LINE__, 0xbfe3b7cb, 0xfea25c68, 0x3fe147ae, 0x147ae153},			/* -0.61618=f(0.54000)*/
-{64, 0,123,__LINE__, 0xbfe3217b, 0x0fd2b102, 0x3fe19999, 0x999999a5},			/* -0.59783=f(0.55000)*/
-{64, 0,123,__LINE__, 0xbfe28ddf, 0x8457461c, 0x3fe1eb85, 0x1eb851f7},			/* -0.57981=f(0.56000)*/
-{64, 0,123,__LINE__, 0xbfe1fce0, 0xd03dd5d1, 0x3fe23d70, 0xa3d70a49},			/* -0.56211=f(0.57000)*/
-{64, 0,123,__LINE__, 0xbfe16e67, 0xaf78762e, 0x3fe28f5c, 0x28f5c29b},			/* -0.54472=f(0.58000)*/
-{64, 0,123,__LINE__, 0xbfe0e25e, 0x0f715cd2, 0x3fe2e147, 0xae147aed},			/* -0.52763=f(0.59000)*/
-{64, 0,123,__LINE__, 0xbfe058ae, 0xfa81143e, 0x3fe33333, 0x3333333f},			/* -0.51082=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbfdfa28d, 0x0a2e9062, 0x3fe3851e, 0xb851eb91},			/* -0.49429=f(0.61000)*/
-{64, 0,123,__LINE__, 0xbfde9823, 0x78d78284, 0x3fe3d70a, 0x3d70a3e3},			/* -0.47803=f(0.62000)*/
-{64, 0,123,__LINE__, 0xbfdd91fd, 0x2d23cf80, 0x3fe428f5, 0xc28f5c35},			/* -0.46203=f(0.63000)*/
-{64, 0,123,__LINE__, 0xbfdc8ff7, 0xc79a99fc, 0x3fe47ae1, 0x47ae1487},			/* -0.44628=f(0.64000)*/
-{64, 0,123,__LINE__, 0xbfdb91f2, 0x8212b9dd, 0x3fe4cccc, 0xccccccd9},			/* -0.43078=f(0.65000)*/
-{64, 0,123,__LINE__, 0xbfda97ce, 0x16b316cd, 0x3fe51eb8, 0x51eb852b},			/* -0.41551=f(0.66000)*/
-{64, 0,123,__LINE__, 0xbfd9a16c, 0xa8d43e5d, 0x3fe570a3, 0xd70a3d7d},			/* -0.40047=f(0.67000)*/
-{64, 0,123,__LINE__, 0xbfd8aeb1, 0xaf986da8, 0x3fe5c28f, 0x5c28f5cf},			/* -0.38566=f(0.68000)*/
-{64, 0,123,__LINE__, 0xbfd7bf81, 0xe213a589, 0x3fe6147a, 0xe147ae21},			/* -0.37106=f(0.69000)*/
-{64, 0,123,__LINE__, 0xbfd6d3c3, 0x24e13f2b, 0x3fe66666, 0x66666673},			/* -0.35667=f(0.70000)*/
-{64, 0,123,__LINE__, 0xbfd5eb5c, 0x7907e4a5, 0x3fe6b851, 0xeb851ec5},			/* -0.34249=f(0.71000)*/
-{64, 0,123,__LINE__, 0xbfd50635, 0xec0fdd45, 0x3fe70a3d, 0x70a3d717},			/* -0.32850=f(0.72000)*/
-{64, 0,123,__LINE__, 0xbfd42438, 0x893252d2, 0x3fe75c28, 0xf5c28f69},			/* -0.31471=f(0.73000)*/
-{64, 0,123,__LINE__, 0xbfd3454e, 0x4b8a9f6d, 0x3fe7ae14, 0x7ae147bb},			/* -0.30110=f(0.74000)*/
-{64, 0,123,__LINE__, 0xbfd26962, 0x1134db70, 0x3fe80000, 0x0000000d},			/* -0.28768=f(0.75000)*/
-{64, 0,123,__LINE__, 0xbfd1905f, 0x8f46d015, 0x3fe851eb, 0x851eb85f},			/* -0.27443=f(0.76000)*/
-{64, 0,123,__LINE__, 0xbfd0ba33, 0x46922d7b, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.26136=f(0.77000)*/
-{64, 0,123,__LINE__, 0xbfcfcd94, 0xf240dd4b, 0x3fe8f5c2, 0x8f5c2903},			/* -0.24846=f(0.78000)*/
-{64, 0,123,__LINE__, 0xbfce2c26, 0x40b4740e, 0x3fe947ae, 0x147ae155},			/* -0.23572=f(0.79000)*/
-{64, 0,123,__LINE__, 0xbfcc8ff7, 0xc79a99de, 0x3fe99999, 0x999999a7},			/* -0.22314=f(0.80000)*/
-{64, 0,123,__LINE__, 0xbfcaf8e8, 0x210a411b, 0x3fe9eb85, 0x1eb851f9},			/* -0.21072=f(0.81000)*/
-{64, 0,123,__LINE__, 0xbfc966d7, 0x21d6f5d6, 0x3fea3d70, 0xa3d70a4b},			/* -0.19845=f(0.82000)*/
-{64, 0,123,__LINE__, 0xbfc7d9a5, 0xca4e123b, 0x3fea8f5c, 0x28f5c29d},			/* -0.18632=f(0.83000)*/
-{64, 0,123,__LINE__, 0xbfc65136, 0x37dde7e6, 0x3feae147, 0xae147aef},			/* -0.17435=f(0.84000)*/
-{64, 0,123,__LINE__, 0xbfc4cd6b, 0x97964138, 0x3feb3333, 0x33333341},			/* -0.16251=f(0.85000)*/
-{64, 0,123,__LINE__, 0xbfc34e2a, 0x1972f9a1, 0x3feb851e, 0xb851eb93},			/* -0.15082=f(0.86000)*/
-{59, 0,123,__LINE__, 0xbfc1d356, 0xe462a82f, 0x3febd70a, 0x3d70a3e5},			/* -0.13926=f(0.87000)*/
-{64, 0,123,__LINE__, 0xbfc05cd8, 0x0afc767f, 0x3fec28f5, 0xc28f5c37},			/* -0.12783=f(0.88000)*/
-{64, 0,123,__LINE__, 0xbfbdd529, 0x01b28754, 0x3fec7ae1, 0x47ae1489},			/* -0.11653=f(0.89000)*/
-{64, 0,123,__LINE__, 0xbfbaf8e8, 0x210a40df, 0x3feccccc, 0xccccccdb},			/* -0.10536=f(0.90000)*/
-{64, 0,123,__LINE__, 0xbfb824be, 0xa3fe154f, 0x3fed1eb8, 0x51eb852d},			/* -0.09431=f(0.91000)*/
-{64, 0,123,__LINE__, 0xbfb5587f, 0x437b27ef, 0x3fed70a3, 0xd70a3d7f},			/* -0.08338=f(0.92000)*/
-{64, 0,123,__LINE__, 0xbfb293fe, 0x305fa8fe, 0x3fedc28f, 0x5c28f5d1},			/* -0.07257=f(0.93000)*/
-{64, 0,123,__LINE__, 0xbfafae22, 0x06cabd40, 0x3fee147a, 0xe147ae23},			/* -0.06187=f(0.94000)*/
-{64, 0,123,__LINE__, 0xbfaa431d, 0x5bcc1842, 0x3fee6666, 0x66666675},			/* -0.05129=f(0.95000)*/
-{64, 0,123,__LINE__, 0xbfa4e69e, 0xd6d80db9, 0x3feeb851, 0xeb851ec7},			/* -0.04082=f(0.96000)*/
-{64, 0,123,__LINE__, 0xbf9f30b2, 0xd0091b9b, 0x3fef0a3d, 0x70a3d719},			/* -0.03045=f(0.97000)*/
-{64, 0,123,__LINE__, 0xbf94b004, 0xbce0aa0d, 0x3fef5c28, 0xf5c28f6b},			/* -0.02020=f(0.98000)*/
-{64, 0,123,__LINE__, 0xbf849545, 0x3e6fd0f3, 0x3fefae14, 0x7ae147bd},			/* -0.01005=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3cdbffff, 0xfffffff9, 0x3ff00000, 0x00000007},			/* 1.55431e-15=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3f8460d6, 0xccca39f3, 0x3ff028f5, 0xc28f5c30},			/* 0.00995=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3f944723, 0xd272a9ae, 0x3ff051eb, 0x851eb859},			/* 0.01980=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3f9e44a9, 0xa3bed81e, 0x3ff07ae1, 0x47ae1482},			/* 0.02955=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fa414bc, 0xc0a36734, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.03922=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fa8fb06, 0x3ef2c8c5, 0x3ff0cccc, 0xccccccd4},			/* 0.04879=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fadd56c, 0x1d883fba, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.05826=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fb15213, 0xc27c91e9, 0x3ff11eb8, 0x51eb8526},			/* 0.06765=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fb3b3b8, 0x02beebfa, 0x3ff147ae, 0x147ae14f},			/* 0.07696=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fb60fbd, 0xd2fffc9d, 0x3ff170a3, 0xd70a3d78},			/* 0.08617=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fb8663f, 0x793c4732, 0x3ff19999, 0x999999a1},			/* 0.09531=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3fbab756, 0x84d3e35b, 0x3ff1c28f, 0x5c28f5ca},			/* 0.10436=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3fbd031b, 0xd5179e65, 0x3ff1eb85, 0x1eb851f3},			/* 0.11332=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fbf49a7, 0x9f8b91f8, 0x3ff2147a, 0xe147ae1c},			/* 0.12221=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fc0c588, 0xbaf1905e, 0x3ff23d70, 0xa3d70a45},			/* 0.13102=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fc1e3b8, 0x25dd0621, 0x3ff26666, 0x6666666e},			/* 0.13976=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fc2ff6d, 0x3e070ee9, 0x3ff28f5c, 0x28f5c297},			/* 0.14842=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fc418b2, 0xe73e533e, 0x3ff2b851, 0xeb851ec0},			/* 0.15700=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fc52f93, 0xbe237458, 0x3ff2e147, 0xae147ae9},			/* 0.16551=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fc6441a, 0x1a9027db, 0x3ff30a3d, 0x70a3d712},			/* 0.17395=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3fdce6bb, 0x25aa1316, 0x3ff921fb, 0x54442d18},			/* 0.45158=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ff250d0, 0x48e7a1bd, 0x400921fb, 0x54442d18},			/* 1.14473=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3ff8cd99, 0x441787d0, 0x4012d97c, 0x7f3321d2},			/* 1.55019=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfe058ae, 0xfa8114c8, 0x3fe33333, 0x333332ec},			/* -0.51082=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3feaa731, 0x08717b4a, 0x40026666, 0x66666654},			/* 0.83290=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3ff62e42, 0xfefa39e6, 0x400fffff, 0xffffffee},			/* 1.38629=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3ffbd8f3, 0x0f4bbf32, 0x4016cccc, 0xccccccc4},			/* 1.74046=f(5.70000)*/
-{64, 0,123,__LINE__, 0x40000307, 0xf2440121, 0x401d9999, 0x99999991},			/* 2.00148=f(7.40000)*/
-{64, 0,123,__LINE__, 0x4001aa8b, 0xc6956465, 0x40223333, 0x3333332f},			/* 2.20827=f(9.10000)*/
-{64, 0,123,__LINE__, 0x4003094f, 0x7bcb4c70, 0x40259999, 0x99999995},			/* 2.37954=f(10.8000)*/
-{64, 0,123,__LINE__, 0x400434b1, 0x382efeb6, 0x4028ffff, 0xfffffffb},			/* 2.52572=f(12.5000)*/
-{64, 0,123,__LINE__, 0x400539d6, 0xec52e6f7, 0x402c6666, 0x66666661},			/* 2.65324=f(14.2000)*/
-{64, 0,123,__LINE__, 0x4006216b, 0xe9c36919, 0x402fcccc, 0xccccccc7},			/* 2.76631=f(15.9000)*/
-{64, 0,123,__LINE__, 0x4006f174, 0xfac41c24, 0x40319999, 0x99999997},			/* 2.86789=f(17.6000)*/
-{64, 0,123,__LINE__, 0x4007ae4b, 0x949d47ad, 0x40334ccc, 0xccccccca},			/* 2.96010=f(19.3000)*/
-{64, 0,123,__LINE__, 0x40085b2e, 0x946faeb0, 0x4034ffff, 0xfffffffd},			/* 3.04452=f(21.0000)*/
-{64, 0,123,__LINE__, 0x4008fa9a, 0x7626ce3f, 0x4036b333, 0x33333330},			/* 3.12236=f(22.7000)*/
-{64, 0,123,__LINE__, 0x40098e81, 0x99ec9ffb, 0x40386666, 0x66666663},			/* 3.19458=f(24.4000)*/
-{64, 0,123,__LINE__, 0x400a1871, 0x8ac5ac13, 0x403a1999, 0x99999996},			/* 3.26193=f(26.1000)*/
-{64, 0,123,__LINE__, 0x400a99ac, 0x7c374f8a, 0x403bcccc, 0xccccccc9},			/* 3.32503=f(27.8000)*/
-{64, 0,123,__LINE__, 0x400b133b, 0x33cfc475, 0x403d7fff, 0xfffffffc},			/* 3.38439=f(29.5000)*/
-0,};
-test_log(m)   {run_vector_1(m,log_vec,(char *)(log),"log","dd");   }	
diff --git a/newlib/libm/test/logf_vec.c b/newlib/libm/test/logf_vec.c
deleted file mode 100644
index f7b541f87..000000000
--- a/newlib/libm/test/logf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type logf_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 0, 0,123,__LINE__, 0xc0414837, 0x1c037d43, 0x3cd19000, 0x00000000},			/* -34.5641=f(9.74915e-16)*/
-{11, 0,123,__LINE__, 0xc0126bb1, 0xbe1af2b1, 0x3f847ae1, 0x47ae16ad},			/* -4.60517=f(0.01000)*/
-{13, 0,123,__LINE__, 0xc00f4bd2, 0xbc7756e7, 0x3f947ae1, 0x47ae1594},			/* -3.91202=f(0.02000)*/
-{13, 0,123,__LINE__, 0xc00c0d6e, 0x3cb8c86b, 0x3f9eb851, 0xeb851fd2},			/* -3.50655=f(0.03000)*/
-{12, 0,123,__LINE__, 0xc009c041, 0xfcb8c86b, 0x3fa47ae1, 0x47ae1508},			/* -3.21887=f(0.04000)*/
-{17, 0,123,__LINE__, 0xc007f742, 0x78fa39ef, 0x3fa99999, 0x99999a27},			/* -2.99573=f(0.05000)*/
-{15, 0,123,__LINE__, 0xc00681dd, 0x7cfa39ef, 0x3faeb851, 0xeb851f46},			/* -2.81341=f(0.06000)*/
-{14, 0,123,__LINE__, 0xc005462a, 0x1efa39ef, 0x3fb1eb85, 0x1eb85232},			/* -2.65926=f(0.07000)*/
-{14, 0,123,__LINE__, 0xc00434b1, 0x3cfa39ef, 0x3fb47ae1, 0x47ae14c1},			/* -2.52572=f(0.08000)*/
-{13, 0,123,__LINE__, 0xc0034378, 0xf73bab73, 0x3fb70a3d, 0x70a3d750},			/* -2.40794=f(0.09000)*/
-{13, 0,123,__LINE__, 0xc0026bb1, 0xb93bab73, 0x3fb99999, 0x999999df},			/* -2.30258=f(0.10000)*/
-{13, 0,123,__LINE__, 0xc001a87f, 0xbf3bab73, 0x3fbc28f5, 0xc28f5c6e},			/* -2.20727=f(0.11000)*/
-{13, 0,123,__LINE__, 0xc000f64c, 0xbd3bab73, 0x3fbeb851, 0xeb851efd},			/* -2.12026=f(0.12000)*/
-{13, 0,123,__LINE__, 0xc000525f, 0x513bab73, 0x3fc0a3d7, 0x0a3d70c6},			/* -2.04022=f(0.13000)*/
-{ 1, 0,123,__LINE__, 0xbfff7532, 0xbe7756e7, 0x3fc1eb85, 0x1eb8520e},			/* -1.96611=f(0.14000)*/
-{ 1, 0,123,__LINE__, 0xbffe5a9a, 0x727756e7, 0x3fc33333, 0x33333356},			/* -1.89712=f(0.15000)*/
-{ 1, 0,123,__LINE__, 0xbffd5240, 0xfa7756e7, 0x3fc47ae1, 0x47ae149e},			/* -1.83258=f(0.16000)*/
-{ 1, 0,123,__LINE__, 0xbffc59ef, 0x6e7756e7, 0x3fc5c28f, 0x5c28f5e6},			/* -1.77195=f(0.17000)*/
-{ 1, 0,123,__LINE__, 0xbffb6fd0, 0x6efa39ef, 0x3fc70a3d, 0x70a3d72e},			/* -1.71479=f(0.18000)*/
-{ 1, 0,123,__LINE__, 0xbffa925a, 0xe6fa39ef, 0x3fc851eb, 0x851eb876},			/* -1.66073=f(0.19000)*/
-{ 1, 0,123,__LINE__, 0xbff9c041, 0xf2fa39ef, 0x3fc99999, 0x999999be},			/* -1.60943=f(0.20000)*/
-{ 1, 0,123,__LINE__, 0xbff8f869, 0xcefa39ef, 0x3fcae147, 0xae147b06},			/* -1.56064=f(0.21000)*/
-{ 1, 0,123,__LINE__, 0xbff839dd, 0xfefa39ef, 0x3fcc28f5, 0xc28f5c4e},			/* -1.51412=f(0.22000)*/
-{ 1, 0,123,__LINE__, 0xbff783ca, 0xecfa39ef, 0x3fcd70a3, 0xd70a3d96},			/* -1.46967=f(0.23000)*/
-{ 1, 0,123,__LINE__, 0xbff6d577, 0xfafa39ef, 0x3fceb851, 0xeb851ede},			/* -1.42711=f(0.24000)*/
-{ 1, 0,123,__LINE__, 0xbff62e42, 0xfefa39ef, 0x3fd00000, 0x00000013},			/* -1.38629=f(0.25000)*/
-{ 1, 0,123,__LINE__, 0xbff58d9d, 0x22fa39ef, 0x3fd0a3d7, 0x0a3d70b7},			/* -1.34707=f(0.26000)*/
-{ 1, 0,123,__LINE__, 0xbff4f307, 0x72fa39ef, 0x3fd147ae, 0x147ae15b},			/* -1.30933=f(0.27000)*/
-{ 1, 0,123,__LINE__, 0xbff45e11, 0x3efa39ef, 0x3fd1eb85, 0x1eb851ff},			/* -1.27296=f(0.28000)*/
-{ 1, 0,123,__LINE__, 0xbff3ce55, 0x5afa39ef, 0x3fd28f5c, 0x28f5c2a3},			/* -1.23787=f(0.29000)*/
-{ 1, 0,123,__LINE__, 0xbff34378, 0xf2fa39ef, 0x3fd33333, 0x33333347},			/* -1.20397=f(0.30000)*/
-{ 1, 0,123,__LINE__, 0xbff2bd2a, 0x5efa39ef, 0x3fd3d70a, 0x3d70a3eb},			/* -1.17118=f(0.31000)*/
-{ 1, 0,123,__LINE__, 0xbff23b1f, 0x7afa39ef, 0x3fd47ae1, 0x47ae148f},			/* -1.13943=f(0.32000)*/
-{ 1, 0,123,__LINE__, 0xbff1bd14, 0xfefa39ef, 0x3fd51eb8, 0x51eb8533},			/* -1.10866=f(0.33000)*/
-{ 1, 0,123,__LINE__, 0xbff142cd, 0xeefa39ef, 0x3fd5c28f, 0x5c28f5d7},			/* -1.07881=f(0.34000)*/
-{ 1, 0,123,__LINE__, 0xbff0cc12, 0x4efa39ef, 0x3fd66666, 0x6666667b},			/* -1.04982=f(0.35000)*/
-{ 1, 0,123,__LINE__, 0xbff058ae, 0xef7d1cf8, 0x3fd70a3d, 0x70a3d71f},			/* -1.02165=f(0.36000)*/
-{ 1, 0,123,__LINE__, 0xbfefd0ea, 0x1efa39ef, 0x3fd7ae14, 0x7ae147c3},			/* -0.99425=f(0.37000)*/
-{ 1, 0,123,__LINE__, 0xbfeef672, 0xcefa39ef, 0x3fd851eb, 0x851eb867},			/* -0.96758=f(0.38000)*/
-{ 1, 0,123,__LINE__, 0xbfee21a8, 0x4efa39ef, 0x3fd8f5c2, 0x8f5c290b},			/* -0.94160=f(0.39000)*/
-{ 1, 0,123,__LINE__, 0xbfed5240, 0xe6fa39ef, 0x3fd99999, 0x999999af},			/* -0.91629=f(0.40000)*/
-{ 1, 0,123,__LINE__, 0xbfec87f8, 0xcefa39ef, 0x3fda3d70, 0xa3d70a53},			/* -0.89159=f(0.41000)*/
-{ 1, 0,123,__LINE__, 0xbfebc290, 0x9efa39ef, 0x3fdae147, 0xae147af7},			/* -0.86750=f(0.42000)*/
-{ 1, 0,123,__LINE__, 0xbfeb01cd, 0x7efa39ef, 0x3fdb851e, 0xb851eb9b},			/* -0.84397=f(0.43000)*/
-{ 1, 0,123,__LINE__, 0xbfea4578, 0xfefa39ef, 0x3fdc28f5, 0xc28f5c3f},			/* -0.82098=f(0.44000)*/
-{ 1, 0,123,__LINE__, 0xbfe98d60, 0x0efa39ef, 0x3fdccccc, 0xcccccce3},			/* -0.79850=f(0.45000)*/
-{ 1, 0,123,__LINE__, 0xbfe8d952, 0xdafa39ef, 0x3fdd70a3, 0xd70a3d87},			/* -0.77652=f(0.46000)*/
-{ 1, 0,123,__LINE__, 0xbfe82925, 0x1efa39ef, 0x3fde147a, 0xe147ae2b},			/* -0.75502=f(0.47000)*/
-{ 1, 0,123,__LINE__, 0xbfe77cac, 0xf6fa39ef, 0x3fdeb851, 0xeb851ecf},			/* -0.73396=f(0.48000)*/
-{ 1, 0,123,__LINE__, 0xbfe6d3c3, 0x1afa39ef, 0x3fdf5c28, 0xf5c28f73},			/* -0.71334=f(0.49000)*/
-{ 1, 0,123,__LINE__, 0xbfe62e42, 0xfefa39ef, 0x3fe00000, 0x0000000b},			/* -0.69314=f(0.50000)*/
-{ 1, 0,123,__LINE__, 0xbfe58c09, 0xeafa39ef, 0x3fe051eb, 0x851eb85d},			/* -0.67334=f(0.51000)*/
-{ 1, 0,123,__LINE__, 0xbfe4ecf7, 0x46fa39ef, 0x3fe0a3d7, 0x0a3d70af},			/* -0.65392=f(0.52000)*/
-{ 1, 0,123,__LINE__, 0xbfe450ec, 0x5afa39ef, 0x3fe0f5c2, 0x8f5c2901},			/* -0.63487=f(0.53000)*/
-{ 1, 0,123,__LINE__, 0xbfe3b7cb, 0xe6fa39ef, 0x3fe147ae, 0x147ae153},			/* -0.61618=f(0.54000)*/
-{ 1, 0,123,__LINE__, 0xbfe3217b, 0x02fa39ef, 0x3fe19999, 0x999999a5},			/* -0.59783=f(0.55000)*/
-{ 1, 0,123,__LINE__, 0xbfe28ddf, 0x7efa39ef, 0x3fe1eb85, 0x1eb851f7},			/* -0.57981=f(0.56000)*/
-{ 1, 0,123,__LINE__, 0xbfe1fce0, 0xcefa39ef, 0x3fe23d70, 0xa3d70a49},			/* -0.56211=f(0.57000)*/
-{ 1, 0,123,__LINE__, 0xbfe16e67, 0xb6fa39ef, 0x3fe28f5c, 0x28f5c29b},			/* -0.54472=f(0.58000)*/
-{ 1, 0,123,__LINE__, 0xbfe0e25e, 0x26fa39ef, 0x3fe2e147, 0xae147aed},			/* -0.52763=f(0.59000)*/
-{ 1, 0,123,__LINE__, 0xbfe058ae, 0xe6fa39ef, 0x3fe33333, 0x3333333f},			/* -0.51082=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0xbfdfa28c, 0xfdf473de, 0x3fe3851e, 0xb851eb91},			/* -0.49429=f(0.61000)*/
-{ 1, 0,123,__LINE__, 0xbfde9823, 0x7df473de, 0x3fe3d70a, 0x3d70a3e3},			/* -0.47803=f(0.62000)*/
-{ 1, 0,123,__LINE__, 0xbfdd91fd, 0x3df473de, 0x3fe428f5, 0xc28f5c35},			/* -0.46203=f(0.63000)*/
-{ 1, 0,123,__LINE__, 0xbfdc8ff7, 0xedf473de, 0x3fe47ae1, 0x47ae1487},			/* -0.44628=f(0.64000)*/
-{ 1, 0,123,__LINE__, 0xbfdb91f2, 0x9df473de, 0x3fe4cccc, 0xccccccd9},			/* -0.43078=f(0.65000)*/
-{ 1, 0,123,__LINE__, 0xbfda97cd, 0xfdf473de, 0x3fe51eb8, 0x51eb852b},			/* -0.41551=f(0.66000)*/
-{ 1, 0,123,__LINE__, 0xbfd9a16c, 0x9df473de, 0x3fe570a3, 0xd70a3d7d},			/* -0.40047=f(0.67000)*/
-{ 1, 0,123,__LINE__, 0xbfd8aeb1, 0xbdf473de, 0x3fe5c28f, 0x5c28f5cf},			/* -0.38566=f(0.68000)*/
-{ 1, 0,123,__LINE__, 0xbfd7bf81, 0xfdf473de, 0x3fe6147a, 0xe147ae21},			/* -0.37106=f(0.69000)*/
-{ 1, 0,123,__LINE__, 0xbfd6d3c3, 0x3df473de, 0x3fe66666, 0x66666673},			/* -0.35667=f(0.70000)*/
-{ 1, 0,123,__LINE__, 0xbfd5eb5c, 0x80000000, 0x3fe6b851, 0xeb851ec5},			/* -0.34249=f(0.71000)*/
-{ 1, 0,123,__LINE__, 0xbfd50635, 0xc0000000, 0x3fe70a3d, 0x70a3d717},			/* -0.32850=f(0.72000)*/
-{ 1, 0,123,__LINE__, 0xbfd42438, 0x80000000, 0x3fe75c28, 0xf5c28f69},			/* -0.31471=f(0.73000)*/
-{ 1, 0,123,__LINE__, 0xbfd3454e, 0x40000000, 0x3fe7ae14, 0x7ae147bb},			/* -0.30110=f(0.74000)*/
-{ 1, 0,123,__LINE__, 0xbfd26962, 0x20000000, 0x3fe80000, 0x0000000d},			/* -0.28768=f(0.75000)*/
-{ 1, 0,123,__LINE__, 0xbfd1905f, 0xa0000000, 0x3fe851eb, 0x851eb85f},			/* -0.27443=f(0.76000)*/
-{ 1, 0,123,__LINE__, 0xbfd0ba33, 0x60000000, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.26136=f(0.77000)*/
-{ 1, 0,123,__LINE__, 0xbfcfcd95, 0x40000000, 0x3fe8f5c2, 0x8f5c2903},			/* -0.24846=f(0.78000)*/
-{ 1, 0,123,__LINE__, 0xbfce2c26, 0x20000000, 0x3fe947ae, 0x147ae155},			/* -0.23572=f(0.79000)*/
-{ 1, 0,123,__LINE__, 0xbfcc8ff7, 0xa0000000, 0x3fe99999, 0x999999a7},			/* -0.22314=f(0.80000)*/
-{ 1, 0,123,__LINE__, 0xbfcaf8e8, 0x20000000, 0x3fe9eb85, 0x1eb851f9},			/* -0.21072=f(0.81000)*/
-{ 1, 0,123,__LINE__, 0xbfc966d7, 0x40000000, 0x3fea3d70, 0xa3d70a4b},			/* -0.19845=f(0.82000)*/
-{ 1, 0,123,__LINE__, 0xbfc7d9a6, 0x00000000, 0x3fea8f5c, 0x28f5c29d},			/* -0.18632=f(0.83000)*/
-{ 1, 0,123,__LINE__, 0xbfc65136, 0x80000000, 0x3feae147, 0xae147aef},			/* -0.17435=f(0.84000)*/
-{ 1, 0,123,__LINE__, 0xbfc4cd6b, 0x60000000, 0x3feb3333, 0x33333341},			/* -0.16251=f(0.85000)*/
-{ 1, 0,123,__LINE__, 0xbfc34e2a, 0x00000000, 0x3feb851e, 0xb851eb93},			/* -0.15082=f(0.86000)*/
-{ 1, 0,123,__LINE__, 0xbfc1d356, 0xe0000000, 0x3febd70a, 0x3d70a3e5},			/* -0.13926=f(0.87000)*/
-{ 1, 0,123,__LINE__, 0xbfc05cd8, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* -0.12783=f(0.88000)*/
-{ 1, 0,123,__LINE__, 0xbfbdd529, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* -0.11653=f(0.89000)*/
-{ 1, 0,123,__LINE__, 0xbfbaf8e8, 0x80000000, 0x3feccccc, 0xccccccdb},			/* -0.10536=f(0.90000)*/
-{ 1, 0,123,__LINE__, 0xbfb824be, 0x20000000, 0x3fed1eb8, 0x51eb852d},			/* -0.09431=f(0.91000)*/
-{ 1, 0,123,__LINE__, 0xbfb5587e, 0xe0000000, 0x3fed70a3, 0xd70a3d7f},			/* -0.08338=f(0.92000)*/
-{ 1, 0,123,__LINE__, 0xbfb293fe, 0x20000000, 0x3fedc28f, 0x5c28f5d1},			/* -0.07257=f(0.93000)*/
-{ 1, 0,123,__LINE__, 0xbfafae22, 0x00000000, 0x3fee147a, 0xe147ae23},			/* -0.06187=f(0.94000)*/
-{ 1, 0,123,__LINE__, 0xbfaa431d, 0xc0000000, 0x3fee6666, 0x66666675},			/* -0.05129=f(0.95000)*/
-{ 1, 0,123,__LINE__, 0xbfa4e69f, 0x80000000, 0x3feeb851, 0xeb851ec7},			/* -0.04082=f(0.96000)*/
-{ 1, 0,123,__LINE__, 0xbf9f30b0, 0xe0000000, 0x3fef0a3d, 0x70a3d719},			/* -0.03045=f(0.97000)*/
-{ 1, 0,123,__LINE__, 0xbf94b003, 0x80000000, 0x3fef5c28, 0xf5c28f6b},			/* -0.02020=f(0.98000)*/
-{ 1, 0,123,__LINE__, 0xbf849544, 0x00000000, 0x3fefae14, 0x7ae147bd},			/* -0.01005=f(0.99000)*/
-{ 0, 0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000007},			/* 0.00000=f(1.00000)*/
-{ 0, 0,123,__LINE__, 0x3f8460d5, 0x80000000, 0x3ff028f5, 0xc28f5c30},			/* 0.00995=f(1.01000)*/
-{ 0, 0,123,__LINE__, 0x3f944722, 0x80000000, 0x3ff051eb, 0x851eb859},			/* 0.01980=f(1.02000)*/
-{ 0, 0,123,__LINE__, 0x3f9e44a7, 0xc0000000, 0x3ff07ae1, 0x47ae1482},			/* 0.02955=f(1.03000)*/
-{ 0, 0,123,__LINE__, 0x3fa414bb, 0x80000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.03922=f(1.04000)*/
-{ 0, 0,123,__LINE__, 0x3fa8fb04, 0xa0000000, 0x3ff0cccc, 0xccccccd4},			/* 0.04879=f(1.05000)*/
-{ 0, 0,123,__LINE__, 0x3fadd56a, 0x40000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.05826=f(1.06000)*/
-{ 0, 0,123,__LINE__, 0x3fb15214, 0xa0000000, 0x3ff11eb8, 0x51eb8526},			/* 0.06765=f(1.07000)*/
-{ 0, 0,123,__LINE__, 0x3fb3b3b8, 0xc0000000, 0x3ff147ae, 0x147ae14f},			/* 0.07696=f(1.08000)*/
-{ 0, 0,123,__LINE__, 0x3fb60fbe, 0x40000000, 0x3ff170a3, 0xd70a3d78},			/* 0.08617=f(1.09000)*/
-{ 0, 0,123,__LINE__, 0x3fb8663f, 0xe0000000, 0x3ff19999, 0x999999a1},			/* 0.09531=f(1.10000)*/
-{ 0, 0,123,__LINE__, 0x3fbab756, 0xa0000000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.10436=f(1.11000)*/
-{ 0, 0,123,__LINE__, 0x3fbd031c, 0x00000000, 0x3ff1eb85, 0x1eb851f3},			/* 0.11332=f(1.12000)*/
-{ 0, 0,123,__LINE__, 0x3fbf49a7, 0x60000000, 0x3ff2147a, 0xe147ae1c},			/* 0.12221=f(1.13000)*/
-{ 0, 0,123,__LINE__, 0x3fc0c588, 0xc0000000, 0x3ff23d70, 0xa3d70a45},			/* 0.13102=f(1.14000)*/
-{ 0, 0,123,__LINE__, 0x3fc1e3b8, 0x00000000, 0x3ff26666, 0x6666666e},			/* 0.13976=f(1.15000)*/
-{ 0, 0,123,__LINE__, 0x3fc2ff6d, 0x20000000, 0x3ff28f5c, 0x28f5c297},			/* 0.14841=f(1.16000)*/
-{ 0, 0,123,__LINE__, 0x3fc418b2, 0x80000000, 0x3ff2b851, 0xeb851ec0},			/* 0.15700=f(1.17000)*/
-{ 0, 0,123,__LINE__, 0x3fc52f93, 0x60000000, 0x3ff2e147, 0xae147ae9},			/* 0.16551=f(1.18000)*/
-{ 0, 0,123,__LINE__, 0x3fc6441a, 0x80000000, 0x3ff30a3d, 0x70a3d712},			/* 0.17395=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{ 9,15, 39,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0x3fdce6bb, 0x4df473de, 0x3ff921fb, 0x54442d18},			/* 0.45158=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3ff250d0, 0x52fa39ef, 0x400921fb, 0x54442d18},			/* 1.14473=f(3.14159)*/
-{ 1, 0,123,__LINE__, 0x3ff8cd99, 0x42fa39ef, 0x4012d97c, 0x7f3321d2},			/* 1.55019=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0xbfe058ae, 0xe6fa39ef, 0x3fe33333, 0x333332ec},			/* -0.51082=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3feaa730, 0xfefa39ef, 0x40026666, 0x66666654},			/* 0.83290=f(2.30000)*/
-{ 1, 0,123,__LINE__, 0x3ff62e42, 0xfefa39ef, 0x400fffff, 0xffffffee},			/* 1.38629=f(4.00000)*/
-{ 1, 0,123,__LINE__, 0x3ffbd8f3, 0x067756e7, 0x4016cccc, 0xccccccc4},			/* 1.74046=f(5.70000)*/
-{13, 0,123,__LINE__, 0x40000307, 0xf33bab73, 0x401d9999, 0x99999991},			/* 2.00148=f(7.40000)*/
-{13, 0,123,__LINE__, 0x4001aa8b, 0xcd3bab73, 0x40223333, 0x3333332f},			/* 2.20827=f(9.10000)*/
-{13, 0,123,__LINE__, 0x4003094f, 0x7f3bab73, 0x40259999, 0x99999995},			/* 2.37954=f(10.8000)*/
-{15, 0,123,__LINE__, 0x400434b1, 0x36fa39ef, 0x4028ffff, 0xfffffffb},			/* 2.52572=f(12.5000)*/
-{14, 0,123,__LINE__, 0x400539d6, 0xeafa39ef, 0x402c6666, 0x66666661},			/* 2.65324=f(14.2000)*/
-{20, 0,123,__LINE__, 0x4006216b, 0xe68a39ef, 0x402fcccc, 0xccccccc7},			/* 2.76631=f(15.9000)*/
-{16, 0,123,__LINE__, 0x4006f174, 0xfdfa39ef, 0x40319999, 0x99999997},			/* 2.86789=f(17.6000)*/
-{15, 0,123,__LINE__, 0x4007ae4b, 0x8efa39ef, 0x40334ccc, 0xccccccca},			/* 2.96010=f(19.3000)*/
-{12, 0,123,__LINE__, 0x40085b2e, 0x92fa39ef, 0x4034ffff, 0xfffffffd},			/* 3.04452=f(21.0000)*/
-{12, 0,123,__LINE__, 0x4008fa9a, 0x7ab8c86b, 0x4036b333, 0x33333330},			/* 3.12236=f(22.7000)*/
-{12, 0,123,__LINE__, 0x40098e81, 0x96b8c86b, 0x40386666, 0x66666663},			/* 3.19458=f(24.4000)*/
-{12, 0,123,__LINE__, 0x400a1871, 0x8ab8c86b, 0x403a1999, 0x99999996},			/* 3.26193=f(26.1000)*/
-{12, 0,123,__LINE__, 0x400a99ac, 0x78b8c86b, 0x403bcccc, 0xccccccc9},			/* 3.32503=f(27.8000)*/
-{12, 0,123,__LINE__, 0x400b133b, 0x33b8c86b, 0x403d7fff, 0xfffffffc},			/* 3.38439=f(29.5000)*/
-0,};
-test_logf(m)   {run_vector_1(m,logf_vec,(char *)(logf),"logf","ff");   }	
diff --git a/newlib/libm/test/math.c b/newlib/libm/test/math.c
deleted file mode 100644
index df63c2df2..000000000
--- a/newlib/libm/test/math.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/* 
-  Test the library maths functions using trusted precomputed test
-  vectors.
-
-  These vectors were originally generated on a sun3 with a 68881 using
-  80 bit precision, but ...
-
-  Each function is called with a variety of interesting arguments.
-  Note that many of the polynomials we use behave badly when the
-  domain is stressed, so the numbers in the vectors depend on what is
-  useful to test - eg sin(1e30) is pointless - the arg has to be
-  reduced modulo pi, and after that there's no bits of significance
-  left to evaluate with - any number would be just as precise as any
-  other.
-
-
-*/
-
-#include "test.h"
-#include <math.h>
-#include <ieeefp.h>
-#include <float.h>
-#include <math.h>
-#include <errno.h>
-#include <stdio.h>
-
-int inacc;
-
-int merror;
-double mretval = 64;
-int traperror = 1;
-char *mname;
-
-int verbose;
-
-/* To test exceptions - we trap them all and return a known value */
-int
-_DEFUN(matherr,(e),
-       struct exception *e)
-{
-  if (traperror) 
-  {
-    merror = e->type + 12;
-    mname = e->name;
-    e->retval = mretval;
-    errno = merror + 24;
-    return 1;
-  }
-  return 0;
-}
-
-
-void _DEFUN(translate_to,(file,r),
-	    FILE *file _AND
-	    double r)
-{
-  __ieee_double_shape_type bits;
-  bits.value = r;
-  fprintf(file, "0x%08x, 0x%08x", bits.parts.msw, bits.parts.lsw);
-}
-
-int 
-_DEFUN(ffcheck,( is, p, name, serrno, merror),
-       double is _AND
-       one_line_type *p _AND
-       char *name _AND
-       int serrno _AND
-       int merror)
-{
-  /* Make sure the answer isn't to far wrong from the correct value */
-  __ieee_double_shape_type correct, isbits;
-  int mag;  
-  isbits.value = is;
-  
-  correct.parts.msw = p->qs[0].msw;
-  correct.parts.lsw = p->qs[0].lsw;
-  
-  mag = mag_of_error(correct.value, is);
-  
-  if (mag < p->error_bit)
-  {
-    inacc ++;
-    
-    printf("%s:%d, inaccurate answer: bit %d (%08x%08x %08x%08x) (%g %g)\n",
-	   name,  p->line, mag,
-	   correct.parts.msw,
-	   correct.parts.lsw,
-	   isbits.parts.msw,
-	   isbits.parts.lsw,
-	   correct.value, is);
-  }      
-  
-#if 0
-  if (p->qs[0].merror != merror) 
-  {
-    printf("testing %s_vec.c:%d, matherr wrong: %d %d\n",
-	   name, p->line, merror, p->qs[0].merror);
-  }
-
-  if (p->qs[0].errno_val != errno) 
-  {
-    printf("testing %s_vec.c:%d, errno wrong: %d %d\n",
-	   name, p->line, errno, p->qs[0].errno_val);
-    
-  }
-#endif
-  return mag;
-}
-
-double
-_DEFUN(thedouble, (msw, lsw),
-       long msw _AND
-       long lsw)
-{
-  __ieee_double_shape_type x;
-  
-  x.parts.msw = msw;
-  x.parts.lsw = lsw;
-  return x.value;
-}
-
-int calc;
-int reduce;
-
-
-_DEFUN(frontline,(f, mag, p, result, merror, errno, args, name),
-       FILE *f _AND
-       int mag _AND
-       one_line_type *p _AND
-       double result _AND
-       int merror _AND
-       int errno _AND
-       char *args _AND
-       char *name)
-{
-  if (reduce && p->error_bit < mag) 
-  {
-    fprintf(f, "{%2d,", p->error_bit);
-  }
-  else 
-  {
-    fprintf(f, "{%2d,",mag);
-  }
-
-
-  fprintf(f,"%2d,%3d,", merror,errno);
-  fprintf(f, "__LINE__, ");
-
-  if (calc) 
-  {
-    translate_to(f, result);
-  }
-  else 
-  {
-    translate_to(f, thedouble(p->qs[0].msw, p->qs[0].lsw));
-  }
-  
-  fprintf(f, ", ");      
-
-  fprintf(f,"0x%08x, 0x%08x", p->qs[1].msw, p->qs[1].lsw);
-  
-
-  if (args[2]) 
-  {
-    fprintf(f, ", ");      
-    fprintf(f,"0x%08x, 0x%08x", p->qs[2].msw, p->qs[2].lsw);
-  }
-	
-  fprintf(f,"},	/* %g=f(%g",result,
-  	  thedouble(p->qs[1].msw, p->qs[1].lsw));
-
-  if (args[2])
-  {
-    fprintf(f,", %g", thedouble(p->qs[2].msw,p->qs[2].lsw));
-  }
-  fprintf(f, ")*/\n");      
-}
-
-_DEFUN(finish,(f, vector,  result , p, args, name),
-       FILE *f _AND
-       int vector _AND
-       double result _AND
-       one_line_type *p _AND
-       char *args _AND
-       char *name)
-{
-  int mag;
-
-  mag = ffcheck(result, p,name,  merror, errno);    
-  if (vector) 
-  {    
-    frontline(f, mag, p, result, merror, errno, args , name);
-  }
-} 
-int redo;  
-
-_DEFUN(run_vector_1,(vector, p, func, name, args),
-       int vector _AND
-       one_line_type *p _AND
-       char *func _AND
-       char *name _AND
-       char *args)
-{
-  FILE *f;
-  int mag;
-  double result;  
-  
-  if (vector)
-  {
-
-    VECOPEN(name, f);
-
-    if (redo)
-    {
-      double k;
-
-      for (k = -.2; k < .2; k+= 0.00132) 
-      {
-
-	fprintf(f,"{1,1, 1,1, 0,0,0x%08x,0x%08x, 0x%08x, 0x%08x},\n",
-		k,k+4);
-
-      }
-
-      for (k = -1.2; k < 1.2; k+= 0.01) 
-      {
-
-	fprintf(f,"{1,1, 1,1, 0,0,0x%08x,0x%08x, 0x%08x, 0x%08x},\n",
-		k,k+4);
-
-      }
-      for (k = -M_PI *2; k < M_PI *2; k+= M_PI/2) 
-      {
-
-	fprintf(f,"{1,1, 1,1, 0,0,0x%08x,0x%08x, 0x%08x, 0x%08x},\n",
-		k,k+4);
-
-      }
-
-      for (k = -30; k < 30; k+= 1.7) 
-      {
-
-	fprintf(f,"{2,2, 1,1, 0,0, 0x%08x,0x%08x, 0x%08x, 0x%08x},\n",
-		k,k+4);
-
-      }
-      VECCLOSE(f, name, args);
-      return;
-    }
-  }
- 
-  newfunc(name);
-  while (p->line) 
-  {
-    double arg1 = thedouble(p->qs[1].msw, p->qs[1].lsw);
-    double arg2 = thedouble(p->qs[2].msw, p->qs[2].lsw);
-
-    double r;
-    double rf;
-    
-    errno = 0;
-    merror = 0;
-    mname = 0;
-
-    
-    line(p->line);          
-
-    merror = 0;
-    errno = 123;
-
-    if (strcmp(args,"dd")==0)
-    {
-      typedef double _EXFUN((*pdblfunc),(double));
-      
-      /* Double function returning a double */
-      
-      result = ((pdblfunc)(func))(arg1);
-      
-      finish(f,vector, result, p, args, name);       
-    }  
-    else  if (strcmp(args,"ff")==0)
-    {
-      float arga;
-      double a;
-      
-      typedef float _EXFUN((*pdblfunc),(float));
-      
-      /* Double function returning a double */
-      
-      if (arg1 < FLT_MAX )
-      {
-	arga = arg1;      
-	result = ((pdblfunc)(func))(arga);
-	finish(f, vector, result, p,args, name);       
-      }
-    }      
-    else if (strcmp(args,"ddd")==0)
-     {
-       typedef double _EXFUN((*pdblfunc),(double,double));
-      
-       result = ((pdblfunc)(func))(arg1,arg2);
-       finish(f, vector, result, p,args, name);       
-     }  
-     else  if (strcmp(args,"fff")==0)
-     {
-       double a,b;
-       
-       float arga;
-       float argb;
-      
-       typedef float _EXFUN((*pdblfunc),(float,float));
-      
-
-       if (arg1 < FLT_MAX && arg2 < FLT_MAX) 
-       {
-	 arga = arg1;      
-	 argb = arg2;
-	 result = ((pdblfunc)(func))(arga, argb);
-	 finish(f, vector, result, p,args, name);       
-       }
-     }      
-     else if (strcmp(args,"did")==0)
-     {
-       typedef double _EXFUN((*pdblfunc),(int,double));
-      
-       result = ((pdblfunc)(func))((int)arg1,arg2);
-       finish(f, vector, result, p,args, name);       
-     }  
-     else  if (strcmp(args,"fif")==0)
-     {
-       double a,b;
-       
-       float arga;
-       float argb;
-      
-       typedef float _EXFUN((*pdblfunc),(int,float));
-      
-
-       if (arg1 < FLT_MAX && arg2 < FLT_MAX) 
-       {
-	 arga = arg1;      
-	 argb = arg2;
-	 result = ((pdblfunc)(func))((int)arga, argb);
-	 finish(f, vector, result, p,args, name);       
-       }
-     }      
-
-    p++;
-  }
-  if (vector)
-  {
-    VECCLOSE(f, name, args);
-  }
-}
-
-void
-_DEFUN_VOID(test_math)
-{
-  test_acos(0);
-  test_acosf(0);
-  test_acosh(0);
-  test_acoshf(0);
-  test_asin(0);
-  test_asinf(0);
-  test_asinh(0);
-  test_asinhf(0);
-  test_atan(0);
-  test_atan2(0);
-  test_atan2f(0);
-  test_atanf(0);
-  test_atanh(0);
-  test_atanhf(0);
-  test_ceil(0);
-  test_ceilf(0);
-  test_cos(0);
-  test_cosf(0);
-  test_cosh(0);
-  test_coshf(0);
-  test_erf(0);
-  test_erfc(0);
-  test_erfcf(0);
-  test_erff(0);
-  test_exp(0);
-  test_expf(0);
-  test_fabs(0);
-  test_fabsf(0);
-  test_floor(0);
-  test_floorf(0);
-  test_fmod(0);
-  test_fmodf(0);
-  test_gamma(0);
-  test_gammaf(0);
-  test_hypot(0);
-  test_hypotf(0);
-  test_j0(0);
-  test_j0f(0);
-  test_j1(0);
-  test_j1f(0);
-  test_jn(0);
-  test_jnf(0);
-  test_log(0);
-  test_log10(0);
-  test_log10f(0);
-  test_log1p(0);
-  test_log1pf(0);
-  test_log2(0);
-  test_log2f(0);
-  test_logf(0);
-  test_sin(0);
-  test_sinf(0);
-  test_sinh(0);
-  test_sinhf(0);
-  test_sqrt(0);
-  test_sqrtf(0);
-  test_tan(0);
-  test_tanf(0);
-  test_tanh(0);
-  test_tanhf(0);
-  test_y0(0);
-  test_y0f(0);
-  test_y1(0);
-  test_y1f(0);
-  test_y1f(0);
-  test_ynf(0);
-}
-
-/* These have to be played with to get to compile on machines which
-   don't have the fancy <foo>f entry points
-*/
-
-#if 0
-float _DEFUN(cosf,(a), float a) { return cos((double)a); }
-float _DEFUN(sinf,(a), float  a) { return sin((double)a); }
-float _DEFUN(log1pf,(a), float a) { return log1p((double)a); }
-float _DEFUN(tanf,(a), float a) { return tan((double)a); }
-float _DEFUN(ceilf,(a), float a) { return ceil(a); }
-float _DEFUN(floorf,(a), float a) { return floor(a); }
-#endif
-
-/*ndef HAVE_FLOAT*/
-#if 0
-
-float fmodf(a,b) float a,b; { return fmod(a,b); }
-float hypotf(a,b) float a,b; { return hypot(a,b); }
-  
-float acosf(a) float a; { return acos(a); }
-float acoshf(a) float a; { return acosh(a); }
-float asinf(a) float a; { return asin(a); }
-float asinhf(a) float a; { return asinh(a); }
-float atanf(a) float a; { return atan(a); }
-float atanhf(a) float a; { return atanh(a); }
-
-float coshf(a) float a; { return cosh(a); }
-float erff(a) float a; { return erf(a); }
-float erfcf(a) float a; { return erfc(a); }
-float expf(a) float a; { return exp(a); }
-float fabsf(a) float a; { return fabs(a); }
-
-float gammaf(a) float a; { return gamma(a); }
-float j0f(a) float a; { return j0(a); }
-float j1f(a) float a; { return j1(a); }
-float log10f(a) float a; { return log10(a); }
-
-float logf(a) float a; { return log(a); }
-
-float sinhf(a) float a; { return sinh(a); }
-float sqrtf(a) float a; { return sqrt(a); }
-
-float tanhf(a) float a; { return tanh(a); }
-float y0f(a) float a; { return y0(a); }
-float y1f(a) float a; { return y1(a); }
-#endif
diff --git a/newlib/libm/test/math2.c b/newlib/libm/test/math2.c
deleted file mode 100644
index 50b537646..000000000
--- a/newlib/libm/test/math2.c
+++ /dev/null
@@ -1,232 +0,0 @@
-
-#include "test.h"
-#include <errno.h>
-
-
-int
-_DEFUN_VOID(randi)
-{
-  static int next;
-  next = (next * 1103515245) + 12345;
-  return ((next >> 16) & 0xffff);
-}
-
-double _DEFUN_VOID(randx)
-{
-  double res;
-  
-  do 
-  {
-    union {
-	short parts[4];
-	double res;
-      } u;
-    
-    u.parts[0] = randi();
-    u.parts[1] = randi();
-    u.parts[2] = randi();
-    u.parts[3] = randi();
-    res = u.res;
-    
-  } while (!finite(res));
-  
-  return res ;
-}
-
-/* Return a random double, but bias for numbers closer to 0 */
-double _DEFUN_VOID(randy)
-{
-  int pow;
-  double r= randx();
-  r = frexp(r, &pow);
-  return ldexp(r, randi() & 0x1f);
-}
-
-void
-_DEFUN_VOID(test_frexp)
-{
-  int i;
-  double r;
-  int t;
-  
-  float xf;  
-  double gives;
-
-  int pow;
-
-  
-  /* Frexp of x return a and n, where a * 2**n == x, so test this with a
-     set of random numbers */
-  for (t = 0; t < 2; t++)   
-  {
-    for (i = 0; i < 1000; i++)  
-    {
-      
-      double x = randx();   
-      line(i);   
-      switch (t) 
-      {
-      case 0:
-	newfunc("frexp/ldexp");
-	r = frexp(x, &pow);
-	if (r > 1.0 || r < -1.0) 
-	{ 
-	  /* Answer can never be > 1 or < 1 */
-	  test_iok(0,1);
-	}
-	
-	gives = ldexp(r ,pow);
-	test_mok(gives,x,62);
-	break;
-      case 1:
-	newfunc("frexpf/ldexpf");
-	if (x > FLT_MIN && x < FLT_MAX)
-	{
-	  /* test floats too, but they have a smaller range so make sure x
-	     isn't too big. Also x can get smaller than a float can
-	     represent to make sure that doesn't happen too */
-	  xf = x;
-	  r = frexpf(xf, &pow);
-	  if (r > 1.0 || r < -1.0) 
-	  { 
-	    /* Answer can never be > 1 or < -1 */
-	    test_iok(0,1);
-	  }
-
-	  gives = ldexpf(r ,pow);
-	  test_mok(gives,x, 32);
-	  
-	}
-      }
-
-    }
-    
-  }
-  
-  /* test a few numbers manually to make sure frexp/ldexp are not
-     testing as ok because both are broken */
-
-  r = frexp(64.0, &i);
-  
-  test_mok(r, 0.5,64);
-  test_iok(i, 7);
-
-  r = frexp(96.0, &i);
-  
-  test_mok(r, 0.75, 64);
-  test_iok(i, 7);
-  
-}
-
-/* Test mod - this is given a real hammering by the strtod type
-   routines, here are some more tests.
-
-   By definition
-
-   modf = func(value, &iptr)
-
-      (*iptr + modf) == value
-
-   we test this
-
-*/
-void
-_DEFUN_VOID(test_mod)
-{
-  int i;
-  
-  newfunc("modf");
-
-  
-  for (i = 0; i < 1000; i++) 
-  {
-    double intpart;
-    double n;
-    line(i);
-    n  = randx();
-    if (finite(n) && n != 0.0 )
-    {
-      double r = modf(n, &intpart);
-      line(i);
-      test_mok(intpart + r, n, 63);
-    }
-    
-  }
-  newfunc("modff");
-  
-  for (i = 0; i < 1000; i++) 
-  {
-    float intpart;
-    double nd;
-    line(i);
-    nd  = randx() ;
-    if (nd < FLT_MAX && finitef(nd) && nd != 0.0)
-    {
-      float n = nd;
-      double r = modff(n, &intpart);
-      line(i);
-      test_mok(intpart + r, n, 32);
-    }
-  }
-
-
-}
-
-/*
-Test pow by multiplying logs  
-*/
-void
-_DEFUN_VOID(test_pow)
-{
-  unsigned int i;  
-  newfunc("pow");
-
-  for (i = 0; i < 1000; i++) 
-  {
-    double n1;
-    double n2;
-    double res;
-    double shouldbe;
-
-    line(i);  
-    n1 = fabs(randy());
-    n2 = fabs(randy()/100.0);
-    res = pow(n1, n2);
-    shouldbe = exp(log(n1) * n2);
-    test_mok(shouldbe, res,64);
-  }
-
-  newfunc("powf");
-  
-  for (i = 0; i < 1000; i++) 
-  {
-    double n1;
-    double n2;
-    double res;
-    double shouldbe;
-
-    errno = 0;
-    
-    line(i);  
-    n1 = fabs(randy());
-    n2 = fabs(randy()/100.0);
-    res = powf(n1, n2);
-    shouldbe = expf(logf(n1) * n2);
-    if (!errno)
-     test_mok(shouldbe, res,28);
-  }
-
-
-
-
-}
-
-
-
-void
-_DEFUN_VOID(test_math2)
-{
-  test_mod();  
-  test_frexp();
-  test_pow();
-}
diff --git a/newlib/libm/test/sin_vec.c b/newlib/libm/test/sin_vec.c
deleted file mode 100644
index 5e95f283d..000000000
--- a/newlib/libm/test/sin_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type sin_vec[] = {
-{62, 0,123,__LINE__, 0xbfedd343, 0xa21a55c6, 0xbff33333, 0x33333333},			/* -0.93203=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbfedb532, 0xd61e9b5d, 0xbff30a3d, 0x70a3d70a},			/* -0.92836=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbfed965f, 0x591f4700, 0xbff2e147, 0xae147ae1},			/* -0.92460=f(-1.18000)*/
-{61, 0,123,__LINE__, 0xbfed76c9, 0xf52192ac, 0xbff2b851, 0xeb851eb8},			/* -0.92075=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbfed5673, 0x792177c4, 0xbff28f5c, 0x28f5c28f},			/* -0.91680=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfed355c, 0xb90c629a, 0xbff26666, 0x66666666},			/* -0.91276=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbfed1386, 0x8dbbc584, 0xbff23d70, 0xa3d70a3d},			/* -0.90863=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbfecf0f1, 0xd4ef8bcd, 0xbff2147a, 0xe147ae14},			/* -0.90441=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbfeccd9f, 0x71486c5e, 0xbff1eb85, 0x1eb851eb},			/* -0.90010=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfeca990, 0x4a421c91, 0xbff1c28f, 0x5c28f5c2},			/* -0.89569=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfec84c5, 0x4c2d6336, 0xbff19999, 0x99999999},			/* -0.89120=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfec5f3f, 0x682a0bc6, 0xbff170a3, 0xd70a3d70},			/* -0.88662=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfec38ff, 0x9420ba3b, 0xbff147ae, 0x147ae147},			/* -0.88195=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfec1206, 0xcabc9f78, 0xbff11eb8, 0x51eb851e},			/* -0.87720=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfebea56, 0x0b650e81, 0xbff0f5c2, 0x8f5c28f5},			/* -0.87235=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfebc1ee, 0x5a36f2c0, 0xbff0cccc, 0xcccccccc},			/* -0.86742=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbfeb98d0, 0xbffe273f, 0xbff0a3d7, 0x0a3d70a3},			/* -0.86240=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbfeb6efe, 0x4a2eaf5f, 0xbff07ae1, 0x47ae147a},			/* -0.85729=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfeb4478, 0x0addd100, 0xbff051eb, 0x851eb851},			/* -0.85210=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbfeb193f, 0x18bb1035, 0xbff028f5, 0xc28f5c28},			/* -0.84683=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfeaed54, 0x8f090cee, 0xbfefffff, 0xfffffffe},			/* -0.84147=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfeac0b9, 0x8d96429e, 0xbfefae14, 0x7ae147ac},			/* -0.83602=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbfea936f, 0x38b5aa0b, 0xbfef5c28, 0xf5c28f5a},			/* -0.83049=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfea6576, 0xb9373da2, 0xbfef0a3d, 0x70a3d708},			/* -0.82488=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfea36d1, 0x3c606028, 0xbfeeb851, 0xeb851eb6},			/* -0.81919=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfea077f, 0xf3e4266b, 0xbfee6666, 0x66666664},			/* -0.81341=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbfe9d784, 0x15db83e2, 0xbfee147a, 0xe147ae12},			/* -0.80755=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfe9a6de, 0xdcbd5a52, 0xbfedc28f, 0x5c28f5c0},			/* -0.80161=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfe97591, 0x87566d0a, 0xbfed70a3, 0xd70a3d6e},			/* -0.79560=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfe9439d, 0x58c13794, 0xbfed1eb8, 0x51eb851c},			/* -0.78950=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfe91103, 0x985da83e, 0xbfeccccc, 0xccccccca},			/* -0.78332=f(-0.90000)*/
-{64, 0,123,__LINE__, 0xbfe8ddc5, 0x91c8beae, 0xbfec7ae1, 0x47ae1478},			/* -0.77707=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfe8a9e4, 0x94d40e8f, 0xbfec28f5, 0xc28f5c26},			/* -0.77073=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfe87561, 0xf57d26cb, 0xbfebd70a, 0x3d70a3d4},			/* -0.76432=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfe8403f, 0x0be4dd7b, 0xbfeb851e, 0xb851eb82},			/* -0.75784=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfe80a7d, 0x34468081, 0xbfeb3333, 0x33333330},			/* -0.75128=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfe7d41d, 0xceeeeb7a, 0xbfeae147, 0xae147ade},			/* -0.74464=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfe79d22, 0x403382e7, 0xbfea8f5c, 0x28f5c28c},			/* -0.73793=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfe7658b, 0xf06914e5, 0xbfea3d70, 0xa3d70a3a},			/* -0.73114=f(-0.82000)*/
-{64, 0,123,__LINE__, 0xbfe72d5c, 0x4bda9fd4, 0xbfe9eb85, 0x1eb851e8},			/* -0.72428=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfe6f494, 0xc2bffecc, 0xbfe99999, 0x99999996},			/* -0.71735=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe6bb36, 0xc9347c88, 0xbfe947ae, 0x147ae144},			/* -0.71035=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe68143, 0xd72d4ce0, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.70327=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfe646bd, 0x686fecc4, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.69613=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfe60ba4, 0xfc88697c, 0xbfe851eb, 0x851eb84e},			/* -0.68892=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe5cffc, 0x16bf8f0d, 0xbfe7ffff, 0xfffffffc},			/* -0.68163=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe593c4, 0x3e10fe1c, 0xbfe7ae14, 0x7ae147aa},			/* -0.67428=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe556fe, 0xfd2129ae, 0xbfe75c28, 0xf5c28f58},			/* -0.66686=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe519ad, 0xe2333cbd, 0xbfe70a3d, 0x70a3d706},			/* -0.65938=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe4dbd2, 0x7f1ee83d, 0xbfe6b851, 0xeb851eb4},			/* -0.65183=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe49d6e, 0x694619b3, 0xbfe66666, 0x66666662},			/* -0.64421=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe45e83, 0x398a9a5d, 0xbfe6147a, 0xe147ae10},			/* -0.63653=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe41f12, 0x8c4397aa, 0xbfe5c28f, 0x5c28f5be},			/* -0.62879=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe3df1e, 0x013314eb, 0xbfe570a3, 0xd70a3d6c},			/* -0.62098=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe39ea7, 0x3b7b469b, 0xbfe51eb8, 0x51eb851a},			/* -0.61311=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe35daf, 0xe193d7a7, 0xbfe4cccc, 0xccccccc8},			/* -0.60518=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe31c39, 0x9d3f18a5, 0xbfe47ae1, 0x47ae1476},			/* -0.59719=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe2da46, 0x1b7f19a5, 0xbfe428f5, 0xc28f5c24},			/* -0.58914=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe297d7, 0x0c8aaec1, 0xbfe3d70a, 0x3d70a3d2},			/* -0.58103=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe254ee, 0x23c25f70, 0xbfe3851e, 0xb851eb80},			/* -0.57286=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe2118d, 0x17a54156, 0xbfe33333, 0x3333332e},			/* -0.56464=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe1cdb5, 0xa1c5be91, 0xbfe2e147, 0xae147adc},			/* -0.55636=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe18969, 0x7ebe47ce, 0xbfe28f5c, 0x28f5c28a},			/* -0.54802=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe144aa, 0x6e25f2ae, 0xbfe23d70, 0xa3d70a38},			/* -0.53963=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe0ff7a, 0x3285044f, 0xbfe1eb85, 0x1eb851e6},			/* -0.53118=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe0b9da, 0x914968cb, 0xbfe19999, 0x99999994},			/* -0.52268=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe073cd, 0x52bb17bb, 0xbfe147ae, 0x147ae142},			/* -0.51413=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe02d54, 0x41f065c8, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.50553=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfdfcce2, 0x5984884f, 0xbfe0a3d7, 0x0a3d709e},			/* -0.49688=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfdf3e4b, 0xc780dba0, 0xbfe051eb, 0x851eb84c},			/* -0.48817=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfdeaee8, 0x744b05e2, 0xbfdfffff, 0xfffffff4},			/* -0.47942=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfde1ebc, 0x0b962615, 0xbfdf5c28, 0xf5c28f50},			/* -0.47062=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdd8dca, 0x3e3b2b2d, 0xbfdeb851, 0xeb851eac},			/* -0.46177=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfdcfc16, 0xc220a41e, 0xbfde147a, 0xe147ae08},			/* -0.45288=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdc69a5, 0x52226ed1, 0xbfdd70a3, 0xd70a3d64},			/* -0.44394=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdbd679, 0xadf94619, 0xbfdccccc, 0xccccccc0},			/* -0.43496=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdb4297, 0x9a223059, 0xbfdc28f5, 0xc28f5c1c},			/* -0.42593=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdaae02, 0xdfc5cea0, 0xbfdb851e, 0xb851eb78},			/* -0.41687=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfda18bf, 0x4c9f8d34, 0xbfdae147, 0xae147ad4},			/* -0.40776=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfd982d0, 0xb2e4b65f, 0xbfda3d70, 0xa3d70a30},			/* -0.39860=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd8ec3a, 0xe92b6762, 0xbfd99999, 0x9999998c},			/* -0.38941=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd85501, 0xca516931, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.38018=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd7bd29, 0x3562ed28, 0xbfd851eb, 0x851eb844},			/* -0.37092=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd724b5, 0x0d812dd2, 0xbfd7ae14, 0x7ae147a0},			/* -0.36161=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd68ba9, 0x39c8f580, 0xbfd70a3d, 0x70a3d6fc},			/* -0.35227=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd5f209, 0xa5390a85, 0xbfd66666, 0x66666658},			/* -0.34289=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd557da, 0x3e9881f6, 0xbfd5c28f, 0x5c28f5b4},			/* -0.33348=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd4bd1e, 0xf85cf9f3, 0xbfd51eb8, 0x51eb8510},			/* -0.32404=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd421db, 0xc890bb30, 0xbfd47ae1, 0x47ae146c},			/* -0.31456=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd38614, 0xa8b8c399, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30505=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd2e9cd, 0x95baba21, 0xbfd33333, 0x33333324},			/* -0.29552=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd24d0a, 0x8fc2cbe7, 0xbfd28f5c, 0x28f5c280},			/* -0.28595=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd1afcf, 0x9a29747e, 0xbfd1eb85, 0x1eb851dc},			/* -0.27635=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd11220, 0xbb59311c, 0xbfd147ae, 0x147ae138},			/* -0.26673=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd07401, 0xfcb41fa9, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25708=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfcfaaee, 0xd4f31558, 0xbfcfffff, 0xffffffe0},			/* -0.24740=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfce6d0a, 0x2756c3a5, 0xbfceb851, 0xeb851e98},			/* -0.23770=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcd2e5e, 0x13e741e8, 0xbfcd70a3, 0xd70a3d50},			/* -0.22797=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcbeef2, 0xc3134b4f, 0xbfcc28f5, 0xc28f5c08},			/* -0.21822=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcaaed0, 0x622ee727, 0xbfcae147, 0xae147ac0},			/* -0.20845=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc96dff, 0x233dd2a3, 0xbfc99999, 0x99999978},			/* -0.19866=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc82c87, 0x3cbdcb4c, 0xbfc851eb, 0x851eb830},			/* -0.18885=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc6ea70, 0xe970bc1b, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17902=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5a7c4, 0x6826cf41, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16918=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc46489, 0xfb886414, 0xbfc47ae1, 0x47ae1458},			/* -0.15931=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc320c9, 0xe9dfecf0, 0xbfc33333, 0x33333310},			/* -0.14943=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1dc8c, 0x7ce3b543, 0xbfc1eb85, 0x1eb851c8},			/* -0.13954=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc097da, 0x017f9018, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12963=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbea575, 0x8f3ce595, 0xbfbeb851, 0xeb851e71},			/* -0.11971=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc1a6e, 0x43e7f702, 0xbfbc28f5, 0xc28f5be2},			/* -0.10977=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb98eae, 0xcb8bcad3, 0xbfb99999, 0x99999953},			/* -0.09983=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb70247, 0xd56ad96c, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08987=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb4754a, 0x151143db, 0xbfb47ae1, 0x47ae1435},			/* -0.07991=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1e7c6, 0x41e760d5, 0xbfb1eb85, 0x1eb851a6},			/* -0.06994=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeb39a, 0x2d885ddf, 0xbfaeb851, 0xeb851e2d},			/* -0.05996=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa996de, 0xa2ff63a2, 0xbfa99999, 0x9999990e},			/* -0.04997=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa4797b, 0x650a7280, 0xbfa47ae1, 0x47ae13ef},			/* -0.03998=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb723, 0xf196670e, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947a87, 0xcda556ec, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847aca, 0xe915e58c, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847aca, 0xe915ea39, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947a87, 0xcda55980, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb723, 0xf19668e0, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa4797b, 0x650a7388, 0x3fa47ae1, 0x47ae1508},			/* 0.03998=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa996de, 0xa2ff64c9, 0x3fa99999, 0x99999a27},			/* 0.04997=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faeb39a, 0x2d885f24, 0x3faeb851, 0xeb851f46},			/* 0.05996=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1e7c6, 0x41e76147, 0x3fb1eb85, 0x1eb85232},			/* 0.06994=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb4754a, 0x1511445b, 0x3fb47ae1, 0x47ae14c1},			/* 0.07991=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb70247, 0xd56ad9fb, 0x3fb70a3d, 0x70a3d750},			/* 0.08987=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb98eae, 0xcb8bcb71, 0x3fb99999, 0x999999df},			/* 0.09983=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc1a6e, 0x43e7f76f, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10977=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbea575, 0x8f3ce611, 0x3fbeb851, 0xeb851efd},			/* 0.11971=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc097da, 0x017f905e, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12963=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1dc8c, 0x7ce3b591, 0x3fc1eb85, 0x1eb8520e},			/* 0.13954=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc320c9, 0xe9dfed45, 0x3fc33333, 0x33333356},			/* 0.14943=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc46489, 0xfb886451, 0x3fc47ae1, 0x47ae149e},			/* 0.15931=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5a7c4, 0x6826cf86, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16918=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc6ea70, 0xe970bc68, 0x3fc70a3d, 0x70a3d72e},			/* 0.17902=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc82c87, 0x3cbdcb81, 0x3fc851eb, 0x851eb876},			/* 0.18885=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc96dff, 0x233dd2e0, 0x3fc99999, 0x999999be},			/* 0.19866=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcaaed0, 0x622ee76b, 0x3fcae147, 0xae147b06},			/* 0.20845=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcbeef2, 0xc3134b9b, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21822=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcd2e5e, 0x13e7423c, 0x3fcd70a3, 0xd70a3d96},			/* 0.22797=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fce6d0a, 0x2756c3e1, 0x3fceb851, 0xeb851ede},			/* 0.23770=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fcfaaee, 0xd4f3159c, 0x3fd00000, 0x00000013},			/* 0.24740=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd07401, 0xfcb41fcf, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25708=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd11220, 0xbb593136, 0x3fd147ae, 0x147ae15b},			/* 0.26673=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd1afcf, 0x9a29749c, 0x3fd1eb85, 0x1eb851ff},			/* 0.27635=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd24d0a, 0x8fc2cc09, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28595=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd2e9cd, 0x95baba46, 0x3fd33333, 0x33333347},			/* 0.29552=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd38614, 0xa8b8c3c2, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30505=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd421db, 0xc890bb4d, 0x3fd47ae1, 0x47ae148f},			/* 0.31456=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd4bd1e, 0xf85cfa14, 0x3fd51eb8, 0x51eb8533},			/* 0.32404=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd557da, 0x3e98821b, 0x3fd5c28f, 0x5c28f5d7},			/* 0.33348=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd5f209, 0xa5390a9e, 0x3fd66666, 0x6666667b},			/* 0.34289=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd68ba9, 0x39c8f59d, 0x3fd70a3d, 0x70a3d71f},			/* 0.35227=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd724b5, 0x0d812df2, 0x3fd7ae14, 0x7ae147c3},			/* 0.36161=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd7bd29, 0x3562ed4c, 0x3fd851eb, 0x851eb867},			/* 0.37092=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd85501, 0xca516959, 0x3fd8f5c2, 0x8f5c290b},			/* 0.38018=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd8ec3a, 0xe92b677e, 0x3fd99999, 0x999999af},			/* 0.38941=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fd982d0, 0xb2e4b67f, 0x3fda3d70, 0xa3d70a53},			/* 0.39860=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fda18bf, 0x4c9f8d58, 0x3fdae147, 0xae147af7},			/* 0.40776=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdaae02, 0xdfc5ceb9, 0x3fdb851e, 0xb851eb9b},			/* 0.41687=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdb4297, 0x9a223075, 0x3fdc28f5, 0xc28f5c3f},			/* 0.42593=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdbd679, 0xadf94639, 0x3fdccccc, 0xcccccce3},			/* 0.43496=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdc69a5, 0x52226ef4, 0x3fdd70a3, 0xd70a3d87},			/* 0.44394=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdcfc16, 0xc220a444, 0x3fde147a, 0xe147ae2b},			/* 0.45288=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdd8dca, 0x3e3b2b49, 0x3fdeb851, 0xeb851ecf},			/* 0.46177=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fde1ebc, 0x0b962634, 0x3fdf5c28, 0xf5c28f73},			/* 0.47062=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fdeaee8, 0x744b0603, 0x3fe00000, 0x0000000b},			/* 0.47942=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fdf3e4b, 0xc780dbb7, 0x3fe051eb, 0x851eb85d},			/* 0.48817=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fdfcce2, 0x59848869, 0x3fe0a3d7, 0x0a3d70af},			/* 0.49688=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe02d54, 0x41f065d7, 0x3fe0f5c2, 0x8f5c2901},			/* 0.50553=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe073cd, 0x52bb17cb, 0x3fe147ae, 0x147ae153},			/* 0.51413=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe0b9da, 0x914968dd, 0x3fe19999, 0x999999a5},			/* 0.52268=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe0ff7a, 0x3285045c, 0x3fe1eb85, 0x1eb851f7},			/* 0.53118=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe144aa, 0x6e25f2bc, 0x3fe23d70, 0xa3d70a49},			/* 0.53963=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe18969, 0x7ebe47de, 0x3fe28f5c, 0x28f5c29b},			/* 0.54802=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe1cdb5, 0xa1c5be9c, 0x3fe2e147, 0xae147aed},			/* 0.55636=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe2118d, 0x17a54163, 0x3fe33333, 0x3333333f},			/* 0.56464=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe254ee, 0x23c25f7e, 0x3fe3851e, 0xb851eb91},			/* 0.57286=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe297d7, 0x0c8aaed1, 0x3fe3d70a, 0x3d70a3e3},			/* 0.58103=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe2da46, 0x1b7f19b6, 0x3fe428f5, 0xc28f5c35},			/* 0.58914=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe31c39, 0x9d3f18b1, 0x3fe47ae1, 0x47ae1487},			/* 0.59719=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe35daf, 0xe193d7b5, 0x3fe4cccc, 0xccccccd9},			/* 0.60518=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe39ea7, 0x3b7b46aa, 0x3fe51eb8, 0x51eb852b},			/* 0.61311=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe3df1e, 0x013314f5, 0x3fe570a3, 0xd70a3d7d},			/* 0.62098=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe41f12, 0x8c4397b6, 0x3fe5c28f, 0x5c28f5cf},			/* 0.62879=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe45e83, 0x398a9a6a, 0x3fe6147a, 0xe147ae21},			/* 0.63653=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe49d6e, 0x694619c2, 0x3fe66666, 0x66666673},			/* 0.64421=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe4dbd2, 0x7f1ee84d, 0x3fe6b851, 0xeb851ec5},			/* 0.65183=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe519ad, 0xe2333cc8, 0x3fe70a3d, 0x70a3d717},			/* 0.65938=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe556fe, 0xfd2129ba, 0x3fe75c28, 0xf5c28f69},			/* 0.66686=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe593c4, 0x3e10fe2a, 0x3fe7ae14, 0x7ae147bb},			/* 0.67428=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe5cffc, 0x16bf8f17, 0x3fe80000, 0x0000000d},			/* 0.68163=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fe60ba4, 0xfc886987, 0x3fe851eb, 0x851eb85f},			/* 0.68892=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fe646bd, 0x686fecd0, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.69613=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe68143, 0xd72d4cee, 0x3fe8f5c2, 0x8f5c2903},			/* 0.70327=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe6bb36, 0xc9347c97, 0x3fe947ae, 0x147ae155},			/* 0.71035=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe6f494, 0xc2bffed6, 0x3fe99999, 0x999999a7},			/* 0.71735=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe72d5c, 0x4bda9fe0, 0x3fe9eb85, 0x1eb851f9},			/* 0.72428=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe7658b, 0xf06914f2, 0x3fea3d70, 0xa3d70a4b},			/* 0.73114=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe79d22, 0x403382f0, 0x3fea8f5c, 0x28f5c29d},			/* 0.73793=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe7d41d, 0xceeeeb84, 0x3feae147, 0xae147aef},			/* 0.74464=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fe80a7d, 0x3446808c, 0x3feb3333, 0x33333341},			/* 0.75128=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe8403f, 0x0be4dd87, 0x3feb851e, 0xb851eb93},			/* 0.75784=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe87561, 0xf57d26d9, 0x3febd70a, 0x3d70a3e5},			/* 0.76432=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe8a9e4, 0x94d40e99, 0x3fec28f5, 0xc28f5c37},			/* 0.77073=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fe8ddc5, 0x91c8beb9, 0x3fec7ae1, 0x47ae1489},			/* 0.77707=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe91103, 0x985da84a, 0x3feccccc, 0xccccccdb},			/* 0.78332=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe9439d, 0x58c1379c, 0x3fed1eb8, 0x51eb852d},			/* 0.78950=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe97591, 0x87566d13, 0x3fed70a3, 0xd70a3d7f},			/* 0.79560=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3fe9a6de, 0xdcbd5a5c, 0x3fedc28f, 0x5c28f5d1},			/* 0.80161=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fe9d784, 0x15db83ed, 0x3fee147a, 0xe147ae23},			/* 0.80755=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fea077f, 0xf3e42677, 0x3fee6666, 0x66666675},			/* 0.81341=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fea36d1, 0x3c606030, 0x3feeb851, 0xeb851ec7},			/* 0.81919=f(0.96000)*/
-{61, 0,123,__LINE__, 0x3fea6576, 0xb9373dac, 0x3fef0a3d, 0x70a3d719},			/* 0.82488=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fea936f, 0x38b5aa16, 0x3fef5c28, 0xf5c28f6b},			/* 0.83049=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3feac0b9, 0x8d9642a5, 0x3fefae14, 0x7ae147bd},			/* 0.83602=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3feaed54, 0x8f090cf6, 0x3ff00000, 0x00000007},			/* 0.84147=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3feb193f, 0x18bb103e, 0x3ff028f5, 0xc28f5c30},			/* 0.84683=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3feb4478, 0x0addd10a, 0x3ff051eb, 0x851eb859},			/* 0.85210=f(1.02000)*/
-{62, 0,123,__LINE__, 0x3feb6efe, 0x4a2eaf6a, 0x3ff07ae1, 0x47ae1482},			/* 0.85729=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3feb98d0, 0xbffe2746, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.86240=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3febc1ee, 0x5a36f2c7, 0x3ff0cccc, 0xccccccd4},			/* 0.86742=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3febea56, 0x0b650e8a, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.87235=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fec1206, 0xcabc9f7e, 0x3ff11eb8, 0x51eb8526},			/* 0.87720=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fec38ff, 0x9420ba42, 0x3ff147ae, 0x147ae14f},			/* 0.88195=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fec5f3f, 0x682a0bce, 0x3ff170a3, 0xd70a3d78},			/* 0.88662=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fec84c5, 0x4c2d633e, 0x3ff19999, 0x999999a1},			/* 0.89120=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3feca990, 0x4a421c9a, 0x3ff1c28f, 0x5c28f5ca},			/* 0.89569=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3feccd9f, 0x71486c64, 0x3ff1eb85, 0x1eb851f3},			/* 0.90010=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fecf0f1, 0xd4ef8bd4, 0x3ff2147a, 0xe147ae1c},			/* 0.90441=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fed1386, 0x8dbbc58c, 0x3ff23d70, 0xa3d70a45},			/* 0.90863=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fed355c, 0xb90c629f, 0x3ff26666, 0x6666666e},			/* 0.91276=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fed5673, 0x792177ca, 0x3ff28f5c, 0x28f5c297},			/* 0.91680=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fed76c9, 0xf52192b2, 0x3ff2b851, 0xeb851ec0},			/* 0.92075=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fed965f, 0x591f4707, 0x3ff2e147, 0xae147ae9},			/* 0.92460=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fedb532, 0xd61e9b64, 0x3ff30a3d, 0x70a3d712},			/* 0.92836=f(1.19000)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 0.00000=f(-6.28318)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffffff, 0xc012d97c, 0x7f3321d2},			/* 0.01000=f(-4.71238)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 0.00000=f(-3.14159)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffffff, 0xbff921fb, 0x54442d18},			/* -0.01000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffffff, 0x3ff921fb, 0x54442d18},			/* 0.01000=f(1.57079)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x400921fb, 0x54442d18},			/* 0.00000=f(3.14159)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffffff, 0x4012d97c, 0x7f3321d2},			/* -0.01000=f(4.71238)*/
-{64, 0,123,__LINE__, 0x3fef9df4, 0x7f1c903a, 0xc03e0000, 0x00000000},			/* 0.98803=f(-30.0000)*/
-{64, 0,123,__LINE__, 0x3f9a477a, 0xe66f277f, 0xc03c4ccc, 0xcccccccd},			/* 0.02566=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xbfefd421, 0x46de2a06, 0xc03a9999, 0x9999999a},			/* -0.99464=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x3fcd85cc, 0x69f5e2a3, 0xc038e666, 0x66666667},			/* 0.23064=f(-24.9000)*/
-{64, 0,123,__LINE__, 0x3feded3d, 0x5814f9bc, 0xc0373333, 0x33333334},			/* 0.93520=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbfde2f55, 0x5b73afb2, 0xc0358000, 0x00000001},			/* -0.47163=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xbfea099d, 0x8186a0b3, 0xc033cccc, 0xccccccce},			/* -0.81367=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x3fe5cd52, 0x86ac03da, 0xc0321999, 0x9999999b},			/* 0.68131=f(-18.1000)*/
-{64, 0,123,__LINE__, 0x3fe46b5e, 0xb4816485, 0xc0306666, 0x66666668},			/* 0.63810=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbfeb105b, 0xa88e8b6c, 0xc02d6666, 0x6666666a},			/* -0.84574=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xbfdae404, 0x4881c582, 0xc02a0000, 0x00000004},			/* -0.42016=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x3fee8753, 0x60c2af6c, 0xc0269999, 0x9999999e},			/* 0.95401=f(-11.3000)*/
-{64, 0,123,__LINE__, 0x3fc65057, 0x0815b831, 0xc0233333, 0x33333338},			/* 0.17432=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xbfeff753, 0xd53a5fa6, 0xc01f9999, 0x999999a3},			/* -0.99894=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x3fb54558, 0xdbbecace, 0xc018cccc, 0xccccccd6},			/* 0.08308=f(-6.20000)*/
-{64, 0,123,__LINE__, 0x3fef47ed, 0x3dc7408f, 0xc0120000, 0x00000009},			/* 0.97753=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbfd57072, 0x235de53e, 0xc0066666, 0x66666678},			/* -0.33498=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbfec84c5, 0x4c2d6356, 0xbff19999, 0x999999bd},			/* -0.89120=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe2118d, 0x17a5411e, 0x3fe33333, 0x333332ec},			/* 0.56464=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe7dcd1, 0x2d582f54, 0x40026666, 0x66666654},			/* 0.74570=f(2.30000)*/
-{64, 0,123,__LINE__, 0xbfe837b9, 0xdddc1e80, 0x400fffff, 0xffffffee},			/* -0.75680=f(4.00000)*/
-{64, 0,123,__LINE__, 0xbfe19f37, 0x497ac7db, 0x4016cccc, 0xccccccc4},			/* -0.55068=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3fecc237, 0x7b0529d7, 0x401d9999, 0x99999991},			/* 0.89870=f(7.40000)*/
-{64, 0,123,__LINE__, 0x3fd46c1b, 0x899fd98a, 0x40223333, 0x3333332f},			/* 0.31909=f(9.10000)*/
-{64, 0,123,__LINE__, 0xbfef63d4, 0x60731b7e, 0x40259999, 0x99999995},			/* -0.98093=f(10.8000)*/
-{64, 0,123,__LINE__, 0xbfb0fa78, 0xcc21d217, 0x4028ffff, 0xfffffffb},			/* -0.06632=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3fefefd5, 0x973e8001, 0x402c6666, 0x66666661},			/* 0.99802=f(14.2000)*/
-{64, 0,123,__LINE__, 0xbfc86e0d, 0xd294df03, 0x402fcccc, 0xccccccc7},			/* -0.19085=f(15.9000)*/
-{64, 0,123,__LINE__, 0xbfee5cef, 0x22f1885d, 0x40319999, 0x99999997},			/* -0.94884=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3fdbdd06, 0xac2737fd, 0x40334ccc, 0xccccccca},			/* 0.43536=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3feac5e2, 0x0bb0d81d, 0x4034ffff, 0xfffffffd},			/* 0.83665=f(21.0000)*/
-{64, 0,123,__LINE__, 0xbfe4d4ae, 0xe6b87cf6, 0x4036b333, 0x33333330},			/* -0.65096=f(22.7000)*/
-{64, 0,123,__LINE__, 0xbfe567b5, 0x914fe670, 0x40386666, 0x66666663},			/* -0.66890=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3fea58be, 0x72fc66fd, 0x403a1999, 0x99999996},			/* 0.82333=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3fdd3b53, 0x753c19f9, 0x403bcccc, 0xccccccc9},			/* 0.45674=f(27.8000)*/
-{64, 0,123,__LINE__, 0xbfee1ced, 0xe66aefee, 0x403d7fff, 0xfffffffc},			/* -0.94103=f(29.5000)*/
-0,};
-test_sin(m)   {run_vector_1(m,sin_vec,(char *)(sin),"sin","dd");   }	
diff --git a/newlib/libm/test/sinf_vec.c b/newlib/libm/test/sinf_vec.c
deleted file mode 100644
index 32eb8b101..000000000
--- a/newlib/libm/test/sinf_vec.c
+++ /dev/null
@@ -1,286 +0,0 @@
-#include "test.h"
- one_line_type sinf_vec[] = {
-{31, 0,123,__LINE__, 0xbfedd343, 0xb0aef9e0, 0xbff33333, 0x33333333},			/* -0.93203=f(-1.20000)*/
-{31, 0,123,__LINE__, 0xbfedb532, 0xde4934c0, 0xbff30a3d, 0x70a3d70a},			/* -0.92836=f(-1.19000)*/
-{31, 0,123,__LINE__, 0xbfed965f, 0x4d4b79b0, 0xbff2e147, 0xae147ae1},			/* -0.92460=f(-1.18000)*/
-{31, 0,123,__LINE__, 0xbfed76c9, 0xecfd00f0, 0xbff2b851, 0xeb851eb8},			/* -0.92075=f(-1.17000)*/
-{31, 0,123,__LINE__, 0xbfed5673, 0x708e95c0, 0xbff28f5c, 0x28f5c28f},			/* -0.91680=f(-1.16000)*/
-{31, 0,123,__LINE__, 0xbfed355c, 0xae3d9410, 0xbff26666, 0x66666666},			/* -0.91276=f(-1.15000)*/
-{11, 0,123,__LINE__, 0xbfed1386, 0x898f05a0, 0xbff23d70, 0xa3d70a3d},			/* -0.90863=f(-1.14000)*/
-{11, 0,123,__LINE__, 0xbfecf0f1, 0xd7ca8350, 0xbff2147a, 0xe147ae14},			/* -0.90441=f(-1.13000)*/
-{11, 0,123,__LINE__, 0xbfeccd9f, 0x72b28700, 0xbff1eb85, 0x1eb851eb},			/* -0.90010=f(-1.12000)*/
-{11, 0,123,__LINE__, 0xbfeca990, 0x532842a0, 0xbff1c28f, 0x5c28f5c2},			/* -0.89569=f(-1.11000)*/
-{11, 0,123,__LINE__, 0xbfec84c5, 0x525ed360, 0xbff19999, 0x99999999},			/* -0.89120=f(-1.10000)*/
-{11, 0,123,__LINE__, 0xbfec5f3f, 0x71376ab0, 0xbff170a3, 0xd70a3d70},			/* -0.88662=f(-1.09000)*/
-{11, 0,123,__LINE__, 0xbfec38ff, 0xa2d0aa60, 0xbff147ae, 0x147ae147},			/* -0.88195=f(-1.08000)*/
-{11, 0,123,__LINE__, 0xbfec1206, 0xde7229c0, 0xbff11eb8, 0x51eb851e},			/* -0.87720=f(-1.07000)*/
-{11, 0,123,__LINE__, 0xbfebea55, 0xfbd69100, 0xbff0f5c2, 0x8f5c28f5},			/* -0.87235=f(-1.06000)*/
-{11, 0,123,__LINE__, 0xbfebc1ee, 0x52738ea0, 0xbff0cccc, 0xcccccccc},			/* -0.86742=f(-1.05000)*/
-{11, 0,123,__LINE__, 0xbfeb98d0, 0xb193c800, 0xbff0a3d7, 0x0a3d70a3},			/* -0.86240=f(-1.04000)*/
-{11, 0,123,__LINE__, 0xbfeb6efe, 0x42186dc0, 0xbff07ae1, 0x47ae147a},			/* -0.85729=f(-1.03000)*/
-{11, 0,123,__LINE__, 0xbfeb4478, 0x06f72b40, 0xbff051eb, 0x851eb851},			/* -0.85210=f(-1.02000)*/
-{11, 0,123,__LINE__, 0xbfeb193f, 0x17c982a0, 0xbff028f5, 0xc28f5c28},			/* -0.84683=f(-1.01000)*/
-{13, 0,123,__LINE__, 0xbfeaed54, 0x90000000, 0xbfefffff, 0xfffffffe},			/* -0.84147=f(-0.01000)*/
-{13, 0,123,__LINE__, 0xbfeac0b9, 0x8ee23980, 0xbfefae14, 0x7ae147ac},			/* -0.83602=f(-0.99000)*/
-{13, 0,123,__LINE__, 0xbfea936f, 0x3f65d980, 0xbfef5c28, 0xf5c28f5a},			/* -0.83049=f(-0.98000)*/
-{13, 0,123,__LINE__, 0xbfea6576, 0xc0808a20, 0xbfef0a3d, 0x70a3d708},			/* -0.82488=f(-0.97000)*/
-{13, 0,123,__LINE__, 0xbfea36d1, 0x310cb938, 0xbfeeb851, 0xeb851eb6},			/* -0.81919=f(-0.96000)*/
-{13, 0,123,__LINE__, 0xbfea077f, 0xee1ec208, 0xbfee6666, 0x66666664},			/* -0.81341=f(-0.95000)*/
-{13, 0,123,__LINE__, 0xbfe9d784, 0x1642a610, 0xbfee147a, 0xe147ae12},			/* -0.80755=f(-0.94000)*/
-{13, 0,123,__LINE__, 0xbfe9a6de, 0xdf4f5690, 0xbfedc28f, 0x5c28f5c0},			/* -0.80161=f(-0.93000)*/
-{13, 0,123,__LINE__, 0xbfe97591, 0x8a4ef7c0, 0xbfed70a3, 0xd70a3d6e},			/* -0.79560=f(-0.92000)*/
-{13, 0,123,__LINE__, 0xbfe9439d, 0x63187a70, 0xbfed1eb8, 0x51eb851c},			/* -0.78950=f(-0.91000)*/
-{13, 0,123,__LINE__, 0xbfe91103, 0x8e759800, 0xbfeccccc, 0xccccccca},			/* -0.78332=f(-0.90000)*/
-{13, 0,123,__LINE__, 0xbfe8ddc5, 0x8f9d4eb0, 0xbfec7ae1, 0x47ae1478},			/* -0.77707=f(-0.89000)*/
-{13, 0,123,__LINE__, 0xbfe8a9e4, 0x92e0bad0, 0xbfec28f5, 0xc28f5c26},			/* -0.77073=f(-0.88000)*/
-{14, 0,123,__LINE__, 0xbfe87561, 0xf591ade8, 0xbfebd70a, 0x3d70a3d4},			/* -0.76432=f(-0.87000)*/
-{14, 0,123,__LINE__, 0xbfe8403f, 0x112aef10, 0xbfeb851e, 0xb851eb82},			/* -0.75784=f(-0.86000)*/
-{14, 0,123,__LINE__, 0xbfe80a7d, 0x3f1d07b8, 0xbfeb3333, 0x33333330},			/* -0.75128=f(-0.85000)*/
-{12, 0,123,__LINE__, 0xbfe7d41d, 0xc35bbdac, 0xbfeae147, 0xae147ade},			/* -0.74464=f(-0.84000)*/
-{12, 0,123,__LINE__, 0xbfe79d22, 0x3a3be0b4, 0xbfea8f5c, 0x28f5c28c},			/* -0.73793=f(-0.83000)*/
-{12, 0,123,__LINE__, 0xbfe7658b, 0xee7f0040, 0xbfea3d70, 0xa3d70a3a},			/* -0.73114=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbfe72d5c, 0x4dc8d870, 0xbfe9eb85, 0x1eb851e8},			/* -0.72428=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbfe6f494, 0xc5bd2530, 0xbfe99999, 0x99999996},			/* -0.71735=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbfe6bb36, 0xd0d6ac78, 0xbfe947ae, 0x147ae144},			/* -0.71035=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbfe68143, 0xcf973f00, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.70327=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbfe646bd, 0x60246e20, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.69613=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbfe60ba4, 0xf91e6ca0, 0xbfe851eb, 0x851eb84e},			/* -0.68892=f(-0.76000)*/
-{14, 0,123,__LINE__, 0xbfe5cffc, 0x18000000, 0xbfe7ffff, 0xfffffffc},			/* -0.68163=f(-0.75000)*/
-{14, 0,123,__LINE__, 0xbfe593c4, 0x4095d910, 0xbfe7ae14, 0x7ae147aa},			/* -0.67428=f(-0.74000)*/
-{14, 0,123,__LINE__, 0xbfe556ff, 0x058df020, 0xbfe75c28, 0xf5c28f58},			/* -0.66686=f(-0.73000)*/
-{14, 0,123,__LINE__, 0xbfe519ad, 0xf0a07ac0, 0xbfe70a3d, 0x70a3d706},			/* -0.65938=f(-0.72000)*/
-{14, 0,123,__LINE__, 0xbfe4dbd2, 0x770615a0, 0xbfe6b851, 0xeb851eb4},			/* -0.65183=f(-0.71000)*/
-{14, 0,123,__LINE__, 0xbfe49d6e, 0x634f5ccc, 0xbfe66666, 0x66666662},			/* -0.64421=f(-0.70000)*/
-{14, 0,123,__LINE__, 0xbfe45e83, 0x390f2640, 0xbfe6147a, 0xe147ae10},			/* -0.63653=f(-0.69000)*/
-{15, 0,123,__LINE__, 0xbfe41f12, 0x8df369ac, 0xbfe5c28f, 0x5c28f5be},			/* -0.62879=f(-0.68000)*/
-{13, 0,123,__LINE__, 0xbfe3df1e, 0x0843b82c, 0xbfe570a3, 0xd70a3d6c},			/* -0.62098=f(-0.67000)*/
-{13, 0,123,__LINE__, 0xbfe39ea7, 0x461eacec, 0xbfe51eb8, 0x51eb851a},			/* -0.61311=f(-0.66000)*/
-{13, 0,123,__LINE__, 0xbfe35daf, 0xd7e1ea68, 0xbfe4cccc, 0xccccccc8},			/* -0.60518=f(-0.65000)*/
-{13, 0,123,__LINE__, 0xbfe31c39, 0x978dbc50, 0xbfe47ae1, 0x47ae1476},			/* -0.59719=f(-0.64000)*/
-{13, 0,123,__LINE__, 0xbfe2da46, 0x185db328, 0xbfe428f5, 0xc28f5c24},			/* -0.58914=f(-0.63000)*/
-{15, 0,123,__LINE__, 0xbfe297d7, 0x0dadda58, 0xbfe3d70a, 0x3d70a3d2},			/* -0.58103=f(-0.62000)*/
-{15, 0,123,__LINE__, 0xbfe254ee, 0x2997adc4, 0xbfe3851e, 0xb851eb80},			/* -0.57286=f(-0.61000)*/
-{15, 0,123,__LINE__, 0xbfe2118d, 0x233ee698, 0xbfe33333, 0x3333332e},			/* -0.56464=f(-0.60000)*/
-{14, 0,123,__LINE__, 0xbfe1cdb5, 0x961530b0, 0xbfe2e147, 0xae147adc},			/* -0.55636=f(-0.59000)*/
-{14, 0,123,__LINE__, 0xbfe18969, 0x782c89a0, 0xbfe28f5c, 0x28f5c28a},			/* -0.54802=f(-0.58000)*/
-{14, 0,123,__LINE__, 0xbfe144aa, 0x6a1ac606, 0xbfe23d70, 0xa3d70a38},			/* -0.53963=f(-0.57000)*/
-{15, 0,123,__LINE__, 0xbfe0ff7a, 0x33c62e08, 0xbfe1eb85, 0x1eb851e6},			/* -0.53118=f(-0.56000)*/
-{15, 0,123,__LINE__, 0xbfe0b9da, 0x9761d676, 0xbfe19999, 0x99999994},			/* -0.52268=f(-0.55000)*/
-{15, 0,123,__LINE__, 0xbfe073cd, 0x5ceda0c6, 0xbfe147ae, 0x147ae142},			/* -0.51413=f(-0.54000)*/
-{16, 0,123,__LINE__, 0xbfe02d54, 0x3472f658, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.50553=f(-0.53000)*/
-{10, 0,123,__LINE__, 0xbfdfcce2, 0x4659bec0, 0xbfe0a3d7, 0x0a3d709e},			/* -0.49688=f(-0.52000)*/
-{10, 0,123,__LINE__, 0xbfdf3e4b, 0xbf702bb0, 0xbfe051eb, 0x851eb84c},			/* -0.48817=f(-0.51000)*/
-{15, 0,123,__LINE__, 0xbfdeaee8, 0x74000000, 0xbfdfffff, 0xfffffff4},			/* -0.47942=f(-0.50000)*/
-{15, 0,123,__LINE__, 0xbfde1ebc, 0x146f6410, 0xbfdf5c28, 0xf5c28f50},			/* -0.47062=f(-0.49000)*/
-{14, 0,123,__LINE__, 0xbfdd8dca, 0x3446fd1e, 0xbfdeb851, 0xeb851eac},			/* -0.46177=f(-0.48000)*/
-{14, 0,123,__LINE__, 0xbfdcfc16, 0xc1ba02f4, 0xbfde147a, 0xe147ae08},			/* -0.45288=f(-0.47000)*/
-{15, 0,123,__LINE__, 0xbfdc69a5, 0x5a913d00, 0xbfdd70a3, 0xd70a3d64},			/* -0.44394=f(-0.46000)*/
-{13, 0,123,__LINE__, 0xbfdbd679, 0xa20713e0, 0xbfdccccc, 0xccccccc0},			/* -0.43496=f(-0.45000)*/
-{13, 0,123,__LINE__, 0xbfdb4297, 0x983de70c, 0xbfdc28f5, 0xc28f5c1c},			/* -0.42593=f(-0.44000)*/
-{15, 0,123,__LINE__, 0xbfdaae02, 0xe739baca, 0xbfdb851e, 0xb851eb78},			/* -0.41687=f(-0.43000)*/
-{16, 0,123,__LINE__, 0xbfda18bf, 0x3fee2934, 0xbfdae147, 0xae147ad4},			/* -0.40776=f(-0.42000)*/
-{14, 0,123,__LINE__, 0xbfd982d0, 0xaefc9748, 0xbfda3d70, 0xa3d70a30},			/* -0.39860=f(-0.41000)*/
-{15, 0,123,__LINE__, 0xbfd8ec3a, 0xee3b0eba, 0xbfd99999, 0x9999998c},			/* -0.38941=f(-0.40000)*/
-{16, 0,123,__LINE__, 0xbfd85501, 0xbcf248f0, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.38018=f(-0.39000)*/
-{12, 0,123,__LINE__, 0xbfd7bd29, 0x305cc1f8, 0xbfd851eb, 0x851eb844},			/* -0.37092=f(-0.38000)*/
-{16, 0,123,__LINE__, 0xbfd724b5, 0x11af1908, 0xbfd7ae14, 0x7ae147a0},			/* -0.36161=f(-0.37000)*/
-{15, 0,123,__LINE__, 0xbfd68ba9, 0x4863ef1c, 0xbfd70a3d, 0x70a3d6fc},			/* -0.35227=f(-0.36000)*/
-{14, 0,123,__LINE__, 0xbfd5f209, 0x9f07a579, 0xbfd66666, 0x66666658},			/* -0.34289=f(-0.35000)*/
-{16, 0,123,__LINE__, 0xbfd557da, 0x420be3a7, 0xbfd5c28f, 0x5c28f5b4},			/* -0.33348=f(-0.34000)*/
-{15, 0,123,__LINE__, 0xbfd4bd1f, 0x05aa7438, 0xbfd51eb8, 0x51eb8510},			/* -0.32404=f(-0.33000)*/
-{17, 0,123,__LINE__, 0xbfd421db, 0xc1691024, 0xbfd47ae1, 0x47ae146c},			/* -0.31456=f(-0.32000)*/
-{17, 0,123,__LINE__, 0xbfd38614, 0xab6112da, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30505=f(-0.31000)*/
-{15, 0,123,__LINE__, 0xbfd2e9cd, 0xa20244ca, 0xbfd33333, 0x33333324},			/* -0.29552=f(-0.30000)*/
-{16, 0,123,__LINE__, 0xbfd24d0a, 0x87533748, 0xbfd28f5c, 0x28f5c280},			/* -0.28595=f(-0.29000)*/
-{17, 0,123,__LINE__, 0xbfd1afcf, 0x9b4da7b2, 0xbfd1eb85, 0x1eb851dc},			/* -0.27635=f(-0.28000)*/
-{17, 0,123,__LINE__, 0xbfd11220, 0xc67b04c1, 0xbfd147ae, 0x147ae138},			/* -0.26673=f(-0.27000)*/
-{16, 0,123,__LINE__, 0xbfd07401, 0xf2b1ea4c, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25708=f(-0.26000)*/
-{17, 0,123,__LINE__, 0xbfcfaaee, 0xd5000000, 0xbfcfffff, 0xffffffe0},			/* -0.24740=f(-0.25000)*/
-{16, 0,123,__LINE__, 0xbfce6d0a, 0x1c1c3aea, 0xbfceb851, 0xeb851e98},			/* -0.23770=f(-0.24000)*/
-{17, 0,123,__LINE__, 0xbfcd2e5e, 0x1c8fab8c, 0xbfcd70a3, 0xd70a3d50},			/* -0.22797=f(-0.23000)*/
-{13, 0,123,__LINE__, 0xbfcbeef2, 0xc0616f0d, 0xbfcc28f5, 0xc28f5c08},			/* -0.21822=f(-0.22000)*/
-{17, 0,123,__LINE__, 0xbfcaaed0, 0x54555088, 0xbfcae147, 0xae147ac0},			/* -0.20845=f(-0.21000)*/
-{16, 0,123,__LINE__, 0xbfc96dff, 0x295b7fc9, 0xbfc99999, 0x99999978},			/* -0.19866=f(-0.20000)*/
-{17, 0,123,__LINE__, 0xbfc82c87, 0x378cfdf0, 0xbfc851eb, 0x851eb830},			/* -0.18885=f(-0.19000)*/
-{15, 0,123,__LINE__, 0xbfc6ea70, 0xf8b799c8, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17902=f(-0.18000)*/
-{17, 0,123,__LINE__, 0xbfc5a7c4, 0x6be43b5b, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16918=f(-0.17000)*/
-{19, 0,123,__LINE__, 0xbfc46489, 0xf3df6afa, 0xbfc47ae1, 0x47ae1458},			/* -0.15931=f(-0.16000)*/
-{19, 0,123,__LINE__, 0xbfc320c9, 0xf69a2036, 0xbfc33333, 0x33333310},			/* -0.14943=f(-0.15000)*/
-{18, 0,123,__LINE__, 0xbfc1dc8c, 0x7e2f9215, 0xbfc1eb85, 0x1eb851c8},			/* -0.13954=f(-0.14000)*/
-{18, 0,123,__LINE__, 0xbfc097d9, 0xf7594c28, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12963=f(-0.13000)*/
-{19, 0,123,__LINE__, 0xbfbea575, 0x83c9a1ff, 0xbfbeb851, 0xeb851e71},			/* -0.11971=f(-0.12000)*/
-{18, 0,123,__LINE__, 0xbfbc1a6e, 0x4150ae4c, 0xbfbc28f5, 0xc28f5be2},			/* -0.10977=f(-0.11000)*/
-{19, 0,123,__LINE__, 0xbfb98eae, 0xd1e3abb3, 0xbfb99999, 0x99999953},			/* -0.09983=f(-0.00100)*/
-{20, 0,123,__LINE__, 0xbfb70247, 0xe4c25fad, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08987=f(-0.09000)*/
-{20, 0,123,__LINE__, 0xbfb4754a, 0x0d687f19, 0xbfb47ae1, 0x47ae1435},			/* -0.07991=f(-0.08000)*/
-{20, 0,123,__LINE__, 0xbfb1e7c6, 0x432c884f, 0xbfb1eb85, 0x1eb851a6},			/* -0.06994=f(-0.07000)*/
-{20, 0,123,__LINE__, 0xbfaeb39a, 0x2206e3a0, 0xbfaeb851, 0xeb851e2d},			/* -0.05996=f(-0.06000)*/
-{20, 0,123,__LINE__, 0xbfa996de, 0xa9628476, 0xbfa99999, 0x9999990e},			/* -0.04997=f(-0.05000)*/
-{16, 0,123,__LINE__, 0xbfa4797b, 0x5d5caf2b, 0xbfa47ae1, 0x47ae13ef},			/* -0.03998=f(-0.04000)*/
-{18, 0,123,__LINE__, 0xbf9eb723, 0xe613009a, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{ 2, 0,123,__LINE__, 0xbf947a87, 0xc5f7cfa2, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{ 2, 0,123,__LINE__, 0xbf847aca, 0xe167df6e, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{26, 0,123,__LINE__, 0x3f847aca, 0xe167df6e, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{25, 0,123,__LINE__, 0x3f947a87, 0xc5f7cfa2, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{20, 0,123,__LINE__, 0x3f9eb723, 0xe613009a, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{22, 0,123,__LINE__, 0x3fa4797b, 0x5d5caf2b, 0x3fa47ae1, 0x47ae1508},			/* 0.03998=f(0.04000)*/
-{20, 0,123,__LINE__, 0x3fa996de, 0xa9628476, 0x3fa99999, 0x99999a27},			/* 0.04997=f(0.05000)*/
-{20, 0,123,__LINE__, 0x3faeb39a, 0x2206e3a0, 0x3faeb851, 0xeb851f46},			/* 0.05996=f(0.06000)*/
-{20, 0,123,__LINE__, 0x3fb1e7c6, 0x432c884f, 0x3fb1eb85, 0x1eb85232},			/* 0.06994=f(0.07000)*/
-{20, 0,123,__LINE__, 0x3fb4754a, 0x0d687f19, 0x3fb47ae1, 0x47ae14c1},			/* 0.07991=f(0.08000)*/
-{20, 0,123,__LINE__, 0x3fb70247, 0xe4c25fad, 0x3fb70a3d, 0x70a3d750},			/* 0.08987=f(0.09000)*/
-{19, 0,123,__LINE__, 0x3fb98eae, 0xd1e3abb3, 0x3fb99999, 0x999999df},			/* 0.09983=f(0.10000)*/
-{18, 0,123,__LINE__, 0x3fbc1a6e, 0x4150ae4c, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10977=f(0.11000)*/
-{19, 0,123,__LINE__, 0x3fbea575, 0x83c9a1ff, 0x3fbeb851, 0xeb851efd},			/* 0.11971=f(0.12000)*/
-{18, 0,123,__LINE__, 0x3fc097d9, 0xf7594c28, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12963=f(0.13000)*/
-{18, 0,123,__LINE__, 0x3fc1dc8c, 0x7e2f9215, 0x3fc1eb85, 0x1eb8520e},			/* 0.13954=f(0.14000)*/
-{19, 0,123,__LINE__, 0x3fc320c9, 0xf69a2036, 0x3fc33333, 0x33333356},			/* 0.14943=f(0.15000)*/
-{19, 0,123,__LINE__, 0x3fc46489, 0xf3df6afa, 0x3fc47ae1, 0x47ae149e},			/* 0.15931=f(0.16000)*/
-{17, 0,123,__LINE__, 0x3fc5a7c4, 0x6be43b5b, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16918=f(0.17000)*/
-{15, 0,123,__LINE__, 0x3fc6ea70, 0xf8b799c8, 0x3fc70a3d, 0x70a3d72e},			/* 0.17902=f(0.18000)*/
-{17, 0,123,__LINE__, 0x3fc82c87, 0x378cfdf0, 0x3fc851eb, 0x851eb876},			/* 0.18885=f(0.19000)*/
-{16, 0,123,__LINE__, 0x3fc96dff, 0x295b7fc9, 0x3fc99999, 0x999999be},			/* 0.19866=f(0.20000)*/
-{17, 0,123,__LINE__, 0x3fcaaed0, 0x54555088, 0x3fcae147, 0xae147b06},			/* 0.20845=f(0.21000)*/
-{13, 0,123,__LINE__, 0x3fcbeef2, 0xc0616f0d, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21822=f(0.22000)*/
-{17, 0,123,__LINE__, 0x3fcd2e5e, 0x1c8fab8c, 0x3fcd70a3, 0xd70a3d96},			/* 0.22797=f(0.23000)*/
-{16, 0,123,__LINE__, 0x3fce6d0a, 0x1c1c3aea, 0x3fceb851, 0xeb851ede},			/* 0.23770=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fcfaaee, 0xd5000000, 0x3fd00000, 0x00000013},			/* 0.24740=f(0.25000)*/
-{16, 0,123,__LINE__, 0x3fd07401, 0xf2b1ea4c, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25708=f(0.26000)*/
-{17, 0,123,__LINE__, 0x3fd11220, 0xc67b04c1, 0x3fd147ae, 0x147ae15b},			/* 0.26673=f(0.27000)*/
-{17, 0,123,__LINE__, 0x3fd1afcf, 0x9b4da7b2, 0x3fd1eb85, 0x1eb851ff},			/* 0.27635=f(0.28000)*/
-{16, 0,123,__LINE__, 0x3fd24d0a, 0x87533748, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28595=f(0.29000)*/
-{15, 0,123,__LINE__, 0x3fd2e9cd, 0xa20244ca, 0x3fd33333, 0x33333347},			/* 0.29552=f(0.30000)*/
-{17, 0,123,__LINE__, 0x3fd38614, 0xab6112da, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30505=f(0.31000)*/
-{17, 0,123,__LINE__, 0x3fd421db, 0xc1691024, 0x3fd47ae1, 0x47ae148f},			/* 0.31456=f(0.32000)*/
-{15, 0,123,__LINE__, 0x3fd4bd1f, 0x05aa7438, 0x3fd51eb8, 0x51eb8533},			/* 0.32404=f(0.33000)*/
-{16, 0,123,__LINE__, 0x3fd557da, 0x420be3a7, 0x3fd5c28f, 0x5c28f5d7},			/* 0.33348=f(0.34000)*/
-{14, 0,123,__LINE__, 0x3fd5f209, 0x9f07a579, 0x3fd66666, 0x6666667b},			/* 0.34289=f(0.35000)*/
-{15, 0,123,__LINE__, 0x3fd68ba9, 0x4863ef1c, 0x3fd70a3d, 0x70a3d71f},			/* 0.35227=f(0.36000)*/
-{16, 0,123,__LINE__, 0x3fd724b5, 0x11af1908, 0x3fd7ae14, 0x7ae147c3},			/* 0.36161=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fd7bd29, 0x305cc1f8, 0x3fd851eb, 0x851eb867},			/* 0.37092=f(0.38000)*/
-{16, 0,123,__LINE__, 0x3fd85501, 0xbcf248f0, 0x3fd8f5c2, 0x8f5c290b},			/* 0.38018=f(0.39000)*/
-{15, 0,123,__LINE__, 0x3fd8ec3a, 0xee3b0eba, 0x3fd99999, 0x999999af},			/* 0.38941=f(0.40000)*/
-{14, 0,123,__LINE__, 0x3fd982d0, 0xaefc9748, 0x3fda3d70, 0xa3d70a53},			/* 0.39860=f(0.41000)*/
-{16, 0,123,__LINE__, 0x3fda18bf, 0x3fee2934, 0x3fdae147, 0xae147af7},			/* 0.40776=f(0.42000)*/
-{15, 0,123,__LINE__, 0x3fdaae02, 0xe739baca, 0x3fdb851e, 0xb851eb9b},			/* 0.41687=f(0.43000)*/
-{13, 0,123,__LINE__, 0x3fdb4297, 0x983de70c, 0x3fdc28f5, 0xc28f5c3f},			/* 0.42593=f(0.44000)*/
-{13, 0,123,__LINE__, 0x3fdbd679, 0xa20713e0, 0x3fdccccc, 0xcccccce3},			/* 0.43496=f(0.45000)*/
-{15, 0,123,__LINE__, 0x3fdc69a5, 0x5a913d00, 0x3fdd70a3, 0xd70a3d87},			/* 0.44394=f(0.46000)*/
-{14, 0,123,__LINE__, 0x3fdcfc16, 0xc1ba02f4, 0x3fde147a, 0xe147ae2b},			/* 0.45288=f(0.47000)*/
-{14, 0,123,__LINE__, 0x3fdd8dca, 0x3446fd1e, 0x3fdeb851, 0xeb851ecf},			/* 0.46177=f(0.48000)*/
-{15, 0,123,__LINE__, 0x3fde1ebc, 0x146f6410, 0x3fdf5c28, 0xf5c28f73},			/* 0.47062=f(0.49000)*/
-{15, 0,123,__LINE__, 0x3fdeaee8, 0x74000000, 0x3fe00000, 0x0000000b},			/* 0.47942=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fdf3e4b, 0xbf702bb0, 0x3fe051eb, 0x851eb85d},			/* 0.48817=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fdfcce2, 0x4659bec0, 0x3fe0a3d7, 0x0a3d70af},			/* 0.49688=f(0.52000)*/
-{16, 0,123,__LINE__, 0x3fe02d54, 0x3472f658, 0x3fe0f5c2, 0x8f5c2901},			/* 0.50553=f(0.53000)*/
-{15, 0,123,__LINE__, 0x3fe073cd, 0x5ceda0c6, 0x3fe147ae, 0x147ae153},			/* 0.51413=f(0.54000)*/
-{15, 0,123,__LINE__, 0x3fe0b9da, 0x9761d676, 0x3fe19999, 0x999999a5},			/* 0.52268=f(0.55000)*/
-{15, 0,123,__LINE__, 0x3fe0ff7a, 0x33c62e08, 0x3fe1eb85, 0x1eb851f7},			/* 0.53118=f(0.56000)*/
-{14, 0,123,__LINE__, 0x3fe144aa, 0x6a1ac606, 0x3fe23d70, 0xa3d70a49},			/* 0.53963=f(0.57000)*/
-{14, 0,123,__LINE__, 0x3fe18969, 0x782c89a0, 0x3fe28f5c, 0x28f5c29b},			/* 0.54802=f(0.58000)*/
-{14, 0,123,__LINE__, 0x3fe1cdb5, 0x961530b0, 0x3fe2e147, 0xae147aed},			/* 0.55636=f(0.59000)*/
-{15, 0,123,__LINE__, 0x3fe2118d, 0x233ee698, 0x3fe33333, 0x3333333f},			/* 0.56464=f(0.60000)*/
-{15, 0,123,__LINE__, 0x3fe254ee, 0x2997adc4, 0x3fe3851e, 0xb851eb91},			/* 0.57286=f(0.61000)*/
-{15, 0,123,__LINE__, 0x3fe297d7, 0x0dadda58, 0x3fe3d70a, 0x3d70a3e3},			/* 0.58103=f(0.62000)*/
-{13, 0,123,__LINE__, 0x3fe2da46, 0x185db328, 0x3fe428f5, 0xc28f5c35},			/* 0.58914=f(0.63000)*/
-{13, 0,123,__LINE__, 0x3fe31c39, 0x978dbc50, 0x3fe47ae1, 0x47ae1487},			/* 0.59719=f(0.64000)*/
-{13, 0,123,__LINE__, 0x3fe35daf, 0xd7e1ea68, 0x3fe4cccc, 0xccccccd9},			/* 0.60518=f(0.65000)*/
-{13, 0,123,__LINE__, 0x3fe39ea7, 0x461eacec, 0x3fe51eb8, 0x51eb852b},			/* 0.61311=f(0.66000)*/
-{13, 0,123,__LINE__, 0x3fe3df1e, 0x0843b82c, 0x3fe570a3, 0xd70a3d7d},			/* 0.62098=f(0.67000)*/
-{15, 0,123,__LINE__, 0x3fe41f12, 0x8df369ac, 0x3fe5c28f, 0x5c28f5cf},			/* 0.62879=f(0.68000)*/
-{14, 0,123,__LINE__, 0x3fe45e83, 0x390f2640, 0x3fe6147a, 0xe147ae21},			/* 0.63653=f(0.69000)*/
-{14, 0,123,__LINE__, 0x3fe49d6e, 0x634f5ccc, 0x3fe66666, 0x66666673},			/* 0.64421=f(0.70000)*/
-{14, 0,123,__LINE__, 0x3fe4dbd2, 0x770615a0, 0x3fe6b851, 0xeb851ec5},			/* 0.65183=f(0.71000)*/
-{14, 0,123,__LINE__, 0x3fe519ad, 0xf0a07ac0, 0x3fe70a3d, 0x70a3d717},			/* 0.65938=f(0.72000)*/
-{14, 0,123,__LINE__, 0x3fe556ff, 0x058df020, 0x3fe75c28, 0xf5c28f69},			/* 0.66686=f(0.73000)*/
-{14, 0,123,__LINE__, 0x3fe593c4, 0x4095d910, 0x3fe7ae14, 0x7ae147bb},			/* 0.67428=f(0.74000)*/
-{14, 0,123,__LINE__, 0x3fe5cffc, 0x18000000, 0x3fe80000, 0x0000000d},			/* 0.68163=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe60ba4, 0xf91e6ca0, 0x3fe851eb, 0x851eb85f},			/* 0.68892=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe646bd, 0x60246e20, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.69613=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe68143, 0xcf973f00, 0x3fe8f5c2, 0x8f5c2903},			/* 0.70327=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe6bb36, 0xd0d6ac78, 0x3fe947ae, 0x147ae155},			/* 0.71035=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe6f494, 0xc5bd2530, 0x3fe99999, 0x999999a7},			/* 0.71735=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe72d5c, 0x4dc8d870, 0x3fe9eb85, 0x1eb851f9},			/* 0.72428=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3fe7658b, 0xee7f0040, 0x3fea3d70, 0xa3d70a4b},			/* 0.73114=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3fe79d22, 0x3a3be0b4, 0x3fea8f5c, 0x28f5c29d},			/* 0.73793=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3fe7d41d, 0xc35bbdac, 0x3feae147, 0xae147aef},			/* 0.74464=f(0.84000)*/
-{14, 0,123,__LINE__, 0x3fe80a7d, 0x3f1d07b8, 0x3feb3333, 0x33333341},			/* 0.75128=f(0.85000)*/
-{14, 0,123,__LINE__, 0x3fe8403f, 0x112aef10, 0x3feb851e, 0xb851eb93},			/* 0.75784=f(0.86000)*/
-{14, 0,123,__LINE__, 0x3fe87561, 0xf591ade8, 0x3febd70a, 0x3d70a3e5},			/* 0.76432=f(0.87000)*/
-{13, 0,123,__LINE__, 0x3fe8a9e4, 0x92e0bad0, 0x3fec28f5, 0xc28f5c37},			/* 0.77073=f(0.88000)*/
-{13, 0,123,__LINE__, 0x3fe8ddc5, 0x8f9d4eb0, 0x3fec7ae1, 0x47ae1489},			/* 0.77707=f(0.89000)*/
-{13, 0,123,__LINE__, 0x3fe91103, 0x8e759800, 0x3feccccc, 0xccccccdb},			/* 0.78332=f(0.90000)*/
-{13, 0,123,__LINE__, 0x3fe9439d, 0x63187a70, 0x3fed1eb8, 0x51eb852d},			/* 0.78950=f(0.91000)*/
-{13, 0,123,__LINE__, 0x3fe97591, 0x8a4ef7c0, 0x3fed70a3, 0xd70a3d7f},			/* 0.79560=f(0.92000)*/
-{13, 0,123,__LINE__, 0x3fe9a6de, 0xdf4f5690, 0x3fedc28f, 0x5c28f5d1},			/* 0.80161=f(0.93000)*/
-{13, 0,123,__LINE__, 0x3fe9d784, 0x1642a610, 0x3fee147a, 0xe147ae23},			/* 0.80755=f(0.94000)*/
-{13, 0,123,__LINE__, 0x3fea077f, 0xee1ec208, 0x3fee6666, 0x66666675},			/* 0.81341=f(0.95000)*/
-{13, 0,123,__LINE__, 0x3fea36d1, 0x310cb938, 0x3feeb851, 0xeb851ec7},			/* 0.81919=f(0.96000)*/
-{13, 0,123,__LINE__, 0x3fea6576, 0xc0808a20, 0x3fef0a3d, 0x70a3d719},			/* 0.82488=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3fea936f, 0x3f65d980, 0x3fef5c28, 0xf5c28f6b},			/* 0.83049=f(0.98000)*/
-{13, 0,123,__LINE__, 0x3feac0b9, 0x8ee23980, 0x3fefae14, 0x7ae147bd},			/* 0.83602=f(0.99000)*/
-{13, 0,123,__LINE__, 0x3feaed54, 0x90000000, 0x3ff00000, 0x00000007},			/* 0.84147=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3feb193f, 0x17c982a0, 0x3ff028f5, 0xc28f5c30},			/* 0.84683=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3feb4478, 0x06f72b40, 0x3ff051eb, 0x851eb859},			/* 0.85210=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3feb6efe, 0x42186dc0, 0x3ff07ae1, 0x47ae1482},			/* 0.85729=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3feb98d0, 0xb193c800, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.86240=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3febc1ee, 0x52738ea0, 0x3ff0cccc, 0xccccccd4},			/* 0.86742=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3febea55, 0xfbd69100, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.87235=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fec1206, 0xde7229c0, 0x3ff11eb8, 0x51eb8526},			/* 0.87720=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fec38ff, 0xa2d0aa60, 0x3ff147ae, 0x147ae14f},			/* 0.88195=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fec5f3f, 0x71376ab0, 0x3ff170a3, 0xd70a3d78},			/* 0.88662=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fec84c5, 0x525ed360, 0x3ff19999, 0x999999a1},			/* 0.89120=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3feca990, 0x532842a0, 0x3ff1c28f, 0x5c28f5ca},			/* 0.89569=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3feccd9f, 0x72b28700, 0x3ff1eb85, 0x1eb851f3},			/* 0.90010=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fecf0f1, 0xd7ca8350, 0x3ff2147a, 0xe147ae1c},			/* 0.90441=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fed1386, 0x898f05a0, 0x3ff23d70, 0xa3d70a45},			/* 0.90863=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fed355c, 0xae3d9410, 0x3ff26666, 0x6666666e},			/* 0.91276=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fed5673, 0x708e95c0, 0x3ff28f5c, 0x28f5c297},			/* 0.91680=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fed76c9, 0xecfd00f0, 0x3ff2b851, 0xeb851ec0},			/* 0.92075=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3fed965f, 0x4d4b79b0, 0x3ff2e147, 0xae147ae9},			/* 0.92460=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3fedb532, 0xde4934c0, 0x3ff30a3d, 0x70a3d712},			/* 0.92836=f(1.19000)*/
-{ 0, 0,123,__LINE__, 0x3fefffff, 0xff660711, 0xc012d97c, 0x7f3321d2},			/* 1.00000=f(-4.71238)*/
-{11, 0,123,__LINE__, 0xbfefffff, 0xf488d2e8, 0xbff921fb, 0x54442d18},			/* -1.00000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{11, 0,123,__LINE__, 0x3fefffff, 0xf488d2e8, 0x3ff921fb, 0x54442d18},			/* 1.00000=f(1.57079)*/
-{ 7, 0,123,__LINE__, 0xbe7777a5, 0xcffffff8, 0x400921fb, 0x54442d18},			/* -8.74228e-08=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0xbfefffff, 0xff660711, 0x4012d97c, 0x7f3321d2},			/* -1.00000=f(4.71238)*/
-{11, 0,123,__LINE__, 0x3fef9df4, 0xb1e4642c, 0xc03e0000, 0x00000000},			/* 0.98803=f(-30.0000)*/
-{ 0, 0,123,__LINE__, 0x3f9a4718, 0xcc369d44, 0xc03c4ccc, 0xcccccccd},			/* 0.02566=f(-28.3000)*/
-{ 0, 0,123,__LINE__, 0xbfefd421, 0x492e7c00, 0xc03a9999, 0x9999999a},			/* -0.99464=f(-26.6000)*/
-{ 0, 0,123,__LINE__, 0x3fcd85d3, 0xcf182eb3, 0xc038e666, 0x66666667},			/* 0.23064=f(-24.9000)*/
-{11, 0,123,__LINE__, 0x3feded3d, 0x8b45e97f, 0xc0373333, 0x33333334},			/* 0.93520=f(-23.2000)*/
-{ 0, 0,123,__LINE__, 0xbfde2f57, 0x4d706576, 0xc0358000, 0x00000001},			/* -0.47163=f(-21.5000)*/
-{11, 0,123,__LINE__, 0xbfea099b, 0xf0641080, 0xc033cccc, 0xccccccce},			/* -0.81367=f(-19.8000)*/
-{11, 0,123,__LINE__, 0x3fe5cd52, 0x799b4b25, 0xc0321999, 0x9999999b},			/* 0.68131=f(-18.1000)*/
-{ 0, 0,123,__LINE__, 0x3fe46b5d, 0x881b4460, 0xc0306666, 0x66666668},			/* 0.63810=f(-16.4000)*/
-{11, 0,123,__LINE__, 0xbfeb105c, 0x3d517bfe, 0xc02d6666, 0x6666666a},			/* -0.84574=f(-14.7000)*/
-{10, 0,123,__LINE__, 0xbfdae402, 0xf37793e0, 0xc02a0000, 0x00000004},			/* -0.42016=f(-13.0000)*/
-{11, 0,123,__LINE__, 0x3fee8753, 0x653e5af1, 0xc0269999, 0x9999999e},			/* 0.95401=f(-11.3000)*/
-{ 0, 0,123,__LINE__, 0x3fc65058, 0xbd1b5eb4, 0xc0233333, 0x33333338},			/* 0.17432=f(-9.60000)*/
-{ 0, 0,123,__LINE__, 0xbfeff753, 0xd002012d, 0xc01f9999, 0x999999a3},			/* -0.99894=f(-7.90000)*/
-{ 0, 0,123,__LINE__, 0x3fb5455c, 0x0c1effcb, 0xc018cccc, 0xccccccd6},			/* 0.08308=f(-6.20000)*/
-{11, 0,123,__LINE__, 0x3fef47ed, 0x3d6ef59a, 0xc0120000, 0x00000009},			/* 0.97753=f(-4.50000)*/
-{10, 0,123,__LINE__, 0xbfd57072, 0x5348b244, 0xc0066666, 0x66666678},			/* -0.33498=f(-2.80000)*/
-{11, 0,123,__LINE__, 0xbfec84c5, 0x525ed360, 0xbff19999, 0x999999bd},			/* -0.89120=f(-1.10000)*/
-{15, 0,123,__LINE__, 0x3fe2118d, 0x233ee698, 0x3fe33333, 0x333332ec},			/* 0.56464=f(0.60000)*/
-{ 0, 0,123,__LINE__, 0x3fe7dcd1, 0x3c5edd01, 0x40026666, 0x66666654},			/* 0.74570=f(2.30000)*/
-{ 0, 0,123,__LINE__, 0xbfe837b9, 0xdd343ee8, 0x400fffff, 0xffffffee},			/* -0.75680=f(4.00000)*/
-{11, 0,123,__LINE__, 0xbfe19f37, 0x9f04b0ee, 0x4016cccc, 0xccccccc4},			/* -0.55068=f(5.70000)*/
-{11, 0,123,__LINE__, 0x3fecc237, 0x682e8000, 0x401d9999, 0x99999991},			/* 0.89870=f(7.40000)*/
-{ 0, 0,123,__LINE__, 0x3fd46c1a, 0xb721a161, 0x40223333, 0x3333332f},			/* 0.31909=f(9.10000)*/
-{ 0, 0,123,__LINE__, 0xbfef63d4, 0x692d42ca, 0x40259999, 0x99999995},			/* -0.98093=f(10.8000)*/
-{ 0, 0,123,__LINE__, 0xbfb0fa7b, 0xb96c5598, 0x4028ffff, 0xfffffffb},			/* -0.06632=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0x3fefefd5, 0x9dd228df, 0x402c6666, 0x66666661},			/* 0.99802=f(14.2000)*/
-{10, 0,123,__LINE__, 0xbfc86e07, 0xcd3622f3, 0x402fcccc, 0xccccccc7},			/* -0.19085=f(15.9000)*/
-{ 0, 0,123,__LINE__, 0xbfee5cef, 0x21612ad9, 0x40319999, 0x99999997},			/* -0.94884=f(17.6000)*/
-{ 0, 0,123,__LINE__, 0x3fdbdd01, 0xcfebc4e0, 0x40334ccc, 0xccccccca},			/* 0.43536=f(19.3000)*/
-{11, 0,123,__LINE__, 0x3feac5e2, 0xa3fc3b2e, 0x4034ffff, 0xfffffffd},			/* 0.83665=f(21.0000)*/
-{11, 0,123,__LINE__, 0xbfe4d4af, 0x48b00aed, 0x4036b333, 0x33333330},			/* -0.65096=f(22.7000)*/
-{ 0, 0,123,__LINE__, 0xbfe567b6, 0xfbf31f85, 0x40386666, 0x66666663},			/* -0.66891=f(24.4000)*/
-{11, 0,123,__LINE__, 0x3fea58be, 0x10063200, 0x403a1999, 0x99999996},			/* 0.82333=f(26.1000)*/
-{ 0, 0,123,__LINE__, 0x3fdd3b58, 0xe939af6e, 0x403bcccc, 0xccccccc9},			/* 0.45674=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0xbfee1ced, 0x68d0d25a, 0x403d7fff, 0xfffffffc},			/* -0.94103=f(29.5000)*/
-0,};
-test_sinf(m)   {run_vector_1(m,sinf_vec,(char *)(sinf),"sinf","ff");   }	
diff --git a/newlib/libm/test/sinh_vec.c b/newlib/libm/test/sinh_vec.c
deleted file mode 100644
index cdcea79b8..000000000
--- a/newlib/libm/test/sinh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type sinh_vec[] = {
-{61, 0,123,__LINE__, 0xbff826c0, 0xf3412349, 0xbff33333, 0x33333333},			/* -1.50946=f(-1.20000)*/
-{61, 0,123,__LINE__, 0xbff7dce5, 0xac88bd42, 0xbff30a3d, 0x70a3d70a},			/* -1.49143=f(-1.19000)*/
-{60, 0,123,__LINE__, 0xbff793a6, 0xc96a7945, 0xbff2e147, 0xae147ae1},			/* -1.47354=f(-1.18000)*/
-{61, 0,123,__LINE__, 0xbff74b02, 0x69df80b2, 0xbff2b851, 0xeb851eb8},			/* -1.45581=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xbff702f6, 0xb1d59e8d, 0xbff28f5c, 0x28f5c28f},			/* -1.43822=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbff6bb81, 0xc9230f5e, 0xbff26666, 0x66666666},			/* -1.42077=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbff674a1, 0xdb7a6ae1, 0xbff23d70, 0xa3d70a3d},			/* -1.40347=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbff62e55, 0x185ea6e8, 0xbff2147a, 0xe147ae14},			/* -1.38631=f(-1.13000)*/
-{62, 0,123,__LINE__, 0xbff5e899, 0xb3173341, 0xbff1eb85, 0x1eb851eb},			/* -1.36928=f(-1.12000)*/
-{63, 0,123,__LINE__, 0xbff5a36d, 0xe2a42e52, 0xbff1c28f, 0x5c28f5c2},			/* -1.35240=f(-1.11000)*/
-{63, 0,123,__LINE__, 0xbff55ecf, 0xe1b2b212, 0xbff19999, 0x99999999},			/* -1.33564=f(-1.10000)*/
-{61, 0,123,__LINE__, 0xbff51abd, 0xee91391b, 0xbff170a3, 0xd70a3d70},			/* -1.31902=f(-1.09000)*/
-{63, 0,123,__LINE__, 0xbff4d736, 0x4b241b87, 0xbff147ae, 0x147ae147},			/* -1.30254=f(-1.08000)*/
-{59, 0,123,__LINE__, 0xbff49437, 0x3cda2350, 0xbff11eb8, 0x51eb851e},			/* -1.28618=f(-1.07000)*/
-{60, 0,123,__LINE__, 0xbff451bf, 0x0ca137d8, 0xbff0f5c2, 0x8f5c28f5},			/* -1.26995=f(-1.06000)*/
-{63, 0,123,__LINE__, 0xbff40fcc, 0x06db2079, 0xbff0cccc, 0xcccccccc},			/* -1.25385=f(-1.05000)*/
-{60, 0,123,__LINE__, 0xbff3ce5c, 0x7b525d87, 0xbff0a3d7, 0x0a3d70a3},			/* -1.23788=f(-1.04000)*/
-{63, 0,123,__LINE__, 0xbff38d6e, 0xbd2f17d4, 0xbff07ae1, 0x47ae147a},			/* -1.22202=f(-1.03000)*/
-{63, 0,123,__LINE__, 0xbff34d01, 0x22ec2632, 0xbff051eb, 0x851eb851},			/* -1.20630=f(-1.02000)*/
-{61, 0,123,__LINE__, 0xbff30d12, 0x064c28b2, 0xbff028f5, 0xc28f5c28},			/* -1.19069=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbff2cd9f, 0xc44eb981, 0xbfefffff, 0xfffffffe},			/* -1.17520=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbff28ea8, 0xbd25b2d0, 0xbfefae14, 0x7ae147ac},			/* -1.15982=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbff2502b, 0x542a89e1, 0xbfef5c28, 0xf5c28f5a},			/* -1.14457=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbff21225, 0xefd3be98, 0xbfef0a3d, 0x70a3d708},			/* -1.12943=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbff1d496, 0xf9aa5f8e, 0xbfeeb851, 0xeb851eb6},			/* -1.11440=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbff1977c, 0xde3fa237, 0xbfee6666, 0x66666664},			/* -1.09948=f(-0.95000)*/
-{64, 0,123,__LINE__, 0xbff15ad6, 0x0d228eef, 0xbfee147a, 0xe147ae12},			/* -1.08467=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbff11ea0, 0xf8d5c0a0, 0xbfedc28f, 0x5c28f5c0},			/* -1.06997=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbff0e2dc, 0x16c537bc, 0xbfed70a3, 0xd70a3d6e},			/* -1.05538=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbff0a785, 0xdf3c4053, 0xbfed1eb8, 0x51eb851c},			/* -1.04089=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbff06c9c, 0xcd5b6af6, 0xbfeccccc, 0xccccccca},			/* -1.02651=f(-0.90000)*/
-{62, 0,123,__LINE__, 0xbff0321f, 0x5f0e982e, 0xbfec7ae1, 0x47ae1478},			/* -1.01223=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfeff018, 0x2a062c81, 0xbfec28f5, 0xc28f5c26},			/* -0.99805=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfef7cc2, 0xe53ba212, 0xbfebd70a, 0x3d70a3d4},			/* -0.98397=f(-0.87000)*/
-{64, 0,123,__LINE__, 0xbfef0a3b, 0xfbe32730, 0xbfeb851e, 0xb851eb82},			/* -0.96999=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfee9880, 0x7f6ab6d3, 0xbfeb3333, 0x33333330},			/* -0.95611=f(-0.85000)*/
-{64, 0,123,__LINE__, 0xbfee278d, 0x867579cd, 0xbfeae147, 0xae147ade},			/* -0.94232=f(-0.84000)*/
-{64, 0,123,__LINE__, 0xbfedb760, 0x2cc8b1f2, 0xbfea8f5c, 0x28f5c28c},			/* -0.92863=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfed47f5, 0x9338c6e0, 0xbfea3d70, 0xa3d70a3a},			/* -0.91503=f(-0.82000)*/
-{63, 0,123,__LINE__, 0xbfecd94a, 0xdf9673f5, 0xbfe9eb85, 0x1eb851e8},			/* -0.90152=f(-0.81000)*/
-{64, 0,123,__LINE__, 0xbfec6b5d, 0x3c9c16ea, 0xbfe99999, 0x99999996},			/* -0.88810=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfebfe29, 0xd9db1ea9, 0xbfe947ae, 0x147ae144},			/* -0.87477=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfeb91ad, 0xeba999d5, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.86153=f(-0.78000)*/
-{62, 0,123,__LINE__, 0xbfeb25e6, 0xab0fe492, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.84837=f(-0.77000)*/
-{64, 0,123,__LINE__, 0xbfeabad1, 0x55b67515, 0xbfe851eb, 0x851eb84e},			/* -0.83530=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfea506b, 0x2dd3c68b, 0xbfe7ffff, 0xfffffffc},			/* -0.82231=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe9e6b1, 0x7a1a61cb, 0xbfe7ae14, 0x7ae147aa},			/* -0.80941=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe97da1, 0x85a7037c, 0xbfe75c28, 0xf5c28f58},			/* -0.79658=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfe91538, 0x9feedf1e, 0xbfe70a3d, 0x70a3d706},			/* -0.78384=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe8ad74, 0x1cadfe96, 0xbfe6b851, 0xeb851eb4},			/* -0.77117=f(-0.71000)*/
-{60, 0,123,__LINE__, 0xbfe84651, 0x53d5bdb8, 0xbfe66666, 0x66666662},			/* -0.75858=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfe7dfcd, 0xa17b6170, 0xbfe6147a, 0xe147ae10},			/* -0.74606=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe779e6, 0x65c6ca07, 0xbfe5c28f, 0x5c28f5be},			/* -0.73363=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe71499, 0x04e14019, 0xbfe570a3, 0xd70a3d6c},			/* -0.72126=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe6afe2, 0xe6e45bcb, 0xbfe51eb8, 0x51eb851a},			/* -0.70897=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe64bc1, 0x77c905d6, 0xbfe4cccc, 0xccccccc8},			/* -0.69674=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe5e832, 0x275691ec, 0xbfe47ae1, 0x47ae1476},			/* -0.68459=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe58532, 0x6911f213, 0xbfe428f5, 0xc28f5c24},			/* -0.67250=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe522bf, 0xb42d0283, 0xbfe3d70a, 0x3d70a3d2},			/* -0.66049=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe4c0d7, 0x8375ed99, 0xbfe3851e, 0xb851eb80},			/* -0.64854=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe45f77, 0x5546a778, 0xbfe33333, 0x3333332e},			/* -0.63665=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe3fe9c, 0xab7480e1, 0xbfe2e147, 0xae147adc},			/* -0.62483=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe39e45, 0x0b3fd0e4, 0xbfe28f5c, 0x28f5c28a},			/* -0.61307=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe33e6d, 0xfd43b4ed, 0xbfe23d70, 0xa3d70a38},			/* -0.60137=f(-0.57000)*/
-{64, 0,123,__LINE__, 0xbfe2df15, 0x0d65e6dc, 0xbfe1eb85, 0x1eb851e6},			/* -0.58973=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe28037, 0xcac6a8a0, 0xbfe19999, 0x99999994},			/* -0.57815=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe221d3, 0xc7b0c504, 0xbfe147ae, 0x147ae142},			/* -0.56662=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe1c3e6, 0x9989a53c, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.55516=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe1666d, 0xd8c17ac3, 0xbfe0a3d7, 0x0a3d709e},			/* -0.54375=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe10967, 0x20c37d30, 0xbfe051eb, 0x851eb84c},			/* -0.53239=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfe0acd0, 0x0fe63b90, 0xbfdfffff, 0xfffffff4},			/* -0.52109=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfe050a6, 0x475c00e4, 0xbfdf5c28, 0xf5c28f50},			/* -0.50984=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdfe9ce, 0xd64696aa, 0xbfdeb851, 0xeb851eac},			/* -0.49864=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfdf3322, 0x43eeab90, 0xbfde147a, 0xe147ae08},			/* -0.48749=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfde7d42, 0x2a8166ab, 0xbfdd70a3, 0xd70a3d64},			/* -0.47639=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfddc829, 0xe20bf8b2, 0xbfdccccc, 0xccccccc0},			/* -0.46534=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfdd13d4, 0xc7b9193c, 0xbfdc28f5, 0xc28f5c1c},			/* -0.45433=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfdc603e, 0x3db2a4ab, 0xbfdb851e, 0xb851eb78},			/* -0.44337=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdbad61, 0xab035ad2, 0xbfdae147, 0xae147ad4},			/* -0.43245=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfdafb3a, 0x7b78bd98, 0xbfda3d70, 0xa3d70a30},			/* -0.42158=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfda49c4, 0x1f850ec3, 0xbfd99999, 0x9999998c},			/* -0.41075=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd998fa, 0x0c216c44, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.39996=f(-0.39000)*/
-{62, 0,123,__LINE__, 0xbfd8e8d7, 0xbab00a19, 0xbfd851eb, 0x851eb844},			/* -0.38921=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd83958, 0xa8de892b, 0xbfd7ae14, 0x7ae147a0},			/* -0.37850=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd78a78, 0x58886a40, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36782=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd6dc32, 0x4f999c59, 0xbfd66666, 0x66666658},			/* -0.35718=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd62e82, 0x17f125b5, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34658=f(-0.34000)*/
-{62, 0,123,__LINE__, 0xbfd58163, 0x3f43e6b2, 0xbfd51eb8, 0x51eb8510},			/* -0.33602=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd4d4d1, 0x56ff75cc, 0xbfd47ae1, 0x47ae146c},			/* -0.32548=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd428c7, 0xf42d140d, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31498=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd37d42, 0xaf54b916, 0xbfd33333, 0x33333324},			/* -0.30452=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd2d23d, 0x24603618, 0xbfd28f5c, 0x28f5c280},			/* -0.29408=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd227b2, 0xf27e6eed, 0xbfd1eb85, 0x1eb851dc},			/* -0.28367=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd17d9f, 0xbc06a8af, 0xbfd147ae, 0x147ae138},			/* -0.27329=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd0d3ff, 0x265becef, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26293=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfd02acc, 0xd9d080f1, 0xbfcfffff, 0xffffffe0},			/* -0.25261=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfcf0409, 0x0312e035, 0xbfceb851, 0xeb851e98},			/* -0.24231=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfcdb343, 0x96c451c7, 0xbfcd70a3, 0xd70a3d50},			/* -0.23203=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcc6340, 0xcfa05725, 0xbfcc28f5, 0xc28f5c08},			/* -0.22177=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcb13f8, 0x138d93ff, 0xbfcae147, 0xae147ac0},			/* -0.21154=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc9c560, 0xcd35ef5f, 0xbfc99999, 0x99999978},			/* -0.20133=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc87772, 0x6bce5312, 0xbfc851eb, 0x851eb830},			/* -0.19114=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc72a24, 0x62de88dd, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18097=f(-0.18000)*/
-{63, 0,123,__LINE__, 0xbfc5dd6e, 0x2a0933fd, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17082=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc49147, 0x3cd3e598, 0xbfc47ae1, 0x47ae1458},			/* -0.16068=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc345a7, 0x1a6f4aa6, 0xbfc33333, 0x33333310},			/* -0.15056=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1fa85, 0x457f71db, 0xbfc1eb85, 0x1eb851c8},			/* -0.14045=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0afd9, 0x43e4283d, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13036=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbecb35, 0x3d02d5b5, 0xbfbeb851, 0xeb851e71},			/* -0.12028=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc3781, 0xc20fd8a8, 0xbfbc28f5, 0xc28f5be2},			/* -0.11022=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb9a487, 0x337b596c, 0xbfb99999, 0x99999953},			/* -0.10016=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb71234, 0xb28d4487, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09012=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb48079, 0x64dae38a, 0xbfb47ae1, 0x47ae1435},			/* -0.08008=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1ef44, 0x73d869da, 0xbfb1eb85, 0x1eb851a6},			/* -0.07005=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaebd0a, 0x18d535bc, 0xbfaeb851, 0xeb851e2d},			/* -0.06003=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99c54, 0xbcf10d6f, 0xbfa99999, 0x9999990e},			/* -0.05002=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47c47, 0x38fab55b, 0xbfa47ae1, 0x47ae13ef},			/* -0.04001=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb97f, 0xec690a08, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947b3a, 0xc2a15f75, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847af7, 0xa654e7bd, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847af7, 0xa654ec21, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947b3a, 0xc2a161a7, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb97f, 0xec690c3b, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47c47, 0x38fab674, 0x3fa47ae1, 0x47ae1508},			/* 0.04001=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99c54, 0xbcf10e89, 0x3fa99999, 0x99999a27},			/* 0.05002=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faebd0a, 0x18d536d5, 0x3faeb851, 0xeb851f46},			/* 0.06003=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1ef44, 0x73d86a66, 0x3fb1eb85, 0x1eb85232},			/* 0.07005=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb48079, 0x64dae416, 0x3fb47ae1, 0x47ae14c1},			/* 0.08008=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb71234, 0xb28d4514, 0x3fb70a3d, 0x70a3d750},			/* 0.09012=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb9a487, 0x337b59f9, 0x3fb99999, 0x999999df},			/* 0.10016=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc3781, 0xc20fd935, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11022=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbecb35, 0x3d02d642, 0x3fbeb851, 0xeb851efd},			/* 0.12028=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0afd9, 0x43e42883, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13036=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1fa85, 0x457f7222, 0x3fc1eb85, 0x1eb8520e},			/* 0.14045=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc345a7, 0x1a6f4aec, 0x3fc33333, 0x33333356},			/* 0.15056=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc49147, 0x3cd3e5df, 0x3fc47ae1, 0x47ae149e},			/* 0.16068=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5dd6e, 0x2a093444, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17082=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc72a24, 0x62de8924, 0x3fc70a3d, 0x70a3d72e},			/* 0.18097=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc87772, 0x6bce535a, 0x3fc851eb, 0x851eb876},			/* 0.19114=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc9c560, 0xcd35efa6, 0x3fc99999, 0x999999be},			/* 0.20133=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcb13f8, 0x138d9446, 0x3fcae147, 0xae147b06},			/* 0.21154=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcc6340, 0xcfa0576d, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22177=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcdb343, 0x96c4520f, 0x3fcd70a3, 0xd70a3d96},			/* 0.23203=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fcf0409, 0x0312e07d, 0x3fceb851, 0xeb851ede},			/* 0.24231=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd02acc, 0xd9d08115, 0x3fd00000, 0x00000013},			/* 0.25261=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd0d3ff, 0x265bed13, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26293=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd17d9f, 0xbc06a8d3, 0x3fd147ae, 0x147ae15b},			/* 0.27329=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd227b2, 0xf27e6f12, 0x3fd1eb85, 0x1eb851ff},			/* 0.28367=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd2d23d, 0x2460363c, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29408=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd37d42, 0xaf54b93b, 0x3fd33333, 0x33333347},			/* 0.30452=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd428c7, 0xf42d1431, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31498=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd4d4d1, 0x56ff75f0, 0x3fd47ae1, 0x47ae148f},			/* 0.32548=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd58163, 0x3f43e6d6, 0x3fd51eb8, 0x51eb8533},			/* 0.33602=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd62e82, 0x17f125da, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34658=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd6dc32, 0x4f999c7e, 0x3fd66666, 0x6666667b},			/* 0.35718=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd78a78, 0x58886a65, 0x3fd70a3d, 0x70a3d71f},			/* 0.36782=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd83958, 0xa8de8951, 0x3fd7ae14, 0x7ae147c3},			/* 0.37850=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd8e8d7, 0xbab00a3f, 0x3fd851eb, 0x851eb867},			/* 0.38921=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd998fa, 0x0c216c69, 0x3fd8f5c2, 0x8f5c290b},			/* 0.39996=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fda49c4, 0x1f850ee9, 0x3fd99999, 0x999999af},			/* 0.41075=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fdafb3a, 0x7b78bdbe, 0x3fda3d70, 0xa3d70a53},			/* 0.42158=f(0.41000)*/
-{63, 0,123,__LINE__, 0x3fdbad61, 0xab035af9, 0x3fdae147, 0xae147af7},			/* 0.43245=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdc603e, 0x3db2a4d1, 0x3fdb851e, 0xb851eb9b},			/* 0.44337=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fdd13d4, 0xc7b91962, 0x3fdc28f5, 0xc28f5c3f},			/* 0.45433=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fddc829, 0xe20bf8d9, 0x3fdccccc, 0xcccccce3},			/* 0.46534=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fde7d42, 0x2a8166d2, 0x3fdd70a3, 0xd70a3d87},			/* 0.47639=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdf3322, 0x43eeabb7, 0x3fde147a, 0xe147ae2b},			/* 0.48749=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdfe9ce, 0xd64696d2, 0x3fdeb851, 0xeb851ecf},			/* 0.49864=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe050a6, 0x475c00f7, 0x3fdf5c28, 0xf5c28f73},			/* 0.50984=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe0acd0, 0x0fe63ba3, 0x3fe00000, 0x0000000b},			/* 0.52109=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe10967, 0x20c37d43, 0x3fe051eb, 0x851eb85d},			/* 0.53239=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe1666d, 0xd8c17ad6, 0x3fe0a3d7, 0x0a3d70af},			/* 0.54375=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe1c3e6, 0x9989a550, 0x3fe0f5c2, 0x8f5c2901},			/* 0.55516=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe221d3, 0xc7b0c518, 0x3fe147ae, 0x147ae153},			/* 0.56662=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe28037, 0xcac6a8b4, 0x3fe19999, 0x999999a5},			/* 0.57815=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe2df15, 0x0d65e6f0, 0x3fe1eb85, 0x1eb851f7},			/* 0.58973=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe33e6d, 0xfd43b501, 0x3fe23d70, 0xa3d70a49},			/* 0.60137=f(0.57000)*/
-{60, 0,123,__LINE__, 0x3fe39e45, 0x0b3fd0f8, 0x3fe28f5c, 0x28f5c29b},			/* 0.61307=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe3fe9c, 0xab7480f5, 0x3fe2e147, 0xae147aed},			/* 0.62483=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe45f77, 0x5546a78c, 0x3fe33333, 0x3333333f},			/* 0.63665=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe4c0d7, 0x8375edad, 0x3fe3851e, 0xb851eb91},			/* 0.64854=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe522bf, 0xb42d0297, 0x3fe3d70a, 0x3d70a3e3},			/* 0.66049=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe58532, 0x6911f228, 0x3fe428f5, 0xc28f5c35},			/* 0.67250=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe5e832, 0x27569201, 0x3fe47ae1, 0x47ae1487},			/* 0.68459=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe64bc1, 0x77c905eb, 0x3fe4cccc, 0xccccccd9},			/* 0.69674=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe6afe2, 0xe6e45be0, 0x3fe51eb8, 0x51eb852b},			/* 0.70897=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fe71499, 0x04e1402e, 0x3fe570a3, 0xd70a3d7d},			/* 0.72126=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe779e6, 0x65c6ca1c, 0x3fe5c28f, 0x5c28f5cf},			/* 0.73363=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe7dfcd, 0xa17b6185, 0x3fe6147a, 0xe147ae21},			/* 0.74606=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe84651, 0x53d5bdcd, 0x3fe66666, 0x66666673},			/* 0.75858=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe8ad74, 0x1cadfeab, 0x3fe6b851, 0xeb851ec5},			/* 0.77117=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fe91538, 0x9feedf34, 0x3fe70a3d, 0x70a3d717},			/* 0.78384=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe97da1, 0x85a70392, 0x3fe75c28, 0xf5c28f69},			/* 0.79658=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe9e6b1, 0x7a1a61e1, 0x3fe7ae14, 0x7ae147bb},			/* 0.80941=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fea506b, 0x2dd3c6a1, 0x3fe80000, 0x0000000d},			/* 0.82231=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3feabad1, 0x55b6752b, 0x3fe851eb, 0x851eb85f},			/* 0.83530=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3feb25e6, 0xab0fe4a8, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.84837=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3feb91ad, 0xeba999ec, 0x3fe8f5c2, 0x8f5c2903},			/* 0.86153=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3febfe29, 0xd9db1ec0, 0x3fe947ae, 0x147ae155},			/* 0.87477=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fec6b5d, 0x3c9c1700, 0x3fe99999, 0x999999a7},			/* 0.88810=f(0.80000)*/
-{61, 0,123,__LINE__, 0x3fecd94a, 0xdf96740c, 0x3fe9eb85, 0x1eb851f9},			/* 0.90152=f(0.81000)*/
-{60, 0,123,__LINE__, 0x3fed47f5, 0x9338c6f7, 0x3fea3d70, 0xa3d70a4b},			/* 0.91503=f(0.82000)*/
-{62, 0,123,__LINE__, 0x3fedb760, 0x2cc8b20a, 0x3fea8f5c, 0x28f5c29d},			/* 0.92863=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fee278d, 0x867579e5, 0x3feae147, 0xae147aef},			/* 0.94232=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fee9880, 0x7f6ab6ea, 0x3feb3333, 0x33333341},			/* 0.95611=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fef0a3b, 0xfbe32748, 0x3feb851e, 0xb851eb93},			/* 0.96999=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fef7cc2, 0xe53ba22a, 0x3febd70a, 0x3d70a3e5},			/* 0.98397=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3feff018, 0x2a062c99, 0x3fec28f5, 0xc28f5c37},			/* 0.99805=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3ff0321f, 0x5f0e983a, 0x3fec7ae1, 0x47ae1489},			/* 1.01223=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3ff06c9c, 0xcd5b6b02, 0x3feccccc, 0xccccccdb},			/* 1.02651=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3ff0a785, 0xdf3c405f, 0x3fed1eb8, 0x51eb852d},			/* 1.04089=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3ff0e2dc, 0x16c537c8, 0x3fed70a3, 0xd70a3d7f},			/* 1.05538=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3ff11ea0, 0xf8d5c0ac, 0x3fedc28f, 0x5c28f5d1},			/* 1.06997=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3ff15ad6, 0x0d228efc, 0x3fee147a, 0xe147ae23},			/* 1.08467=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3ff1977c, 0xde3fa244, 0x3fee6666, 0x66666675},			/* 1.09948=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3ff1d496, 0xf9aa5f9a, 0x3feeb851, 0xeb851ec7},			/* 1.11440=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3ff21225, 0xefd3bea5, 0x3fef0a3d, 0x70a3d719},			/* 1.12943=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3ff2502b, 0x542a89ee, 0x3fef5c28, 0xf5c28f6b},			/* 1.14457=f(0.98000)*/
-{62, 0,123,__LINE__, 0x3ff28ea8, 0xbd25b2de, 0x3fefae14, 0x7ae147bd},			/* 1.15982=f(0.99000)*/
-{63, 0,123,__LINE__, 0x3ff2cd9f, 0xc44eb98c, 0x3ff00000, 0x00000007},			/* 1.17520=f(1.00000)*/
-{57, 0,123,__LINE__, 0x3ff30d12, 0x064c28bf, 0x3ff028f5, 0xc28f5c30},			/* 1.19069=f(1.01000)*/
-{57, 0,123,__LINE__, 0x3ff34d01, 0x22ec263e, 0x3ff051eb, 0x851eb859},			/* 1.20630=f(1.02000)*/
-{58, 0,123,__LINE__, 0x3ff38d6e, 0xbd2f17df, 0x3ff07ae1, 0x47ae1482},			/* 1.22202=f(1.03000)*/
-{61, 0,123,__LINE__, 0x3ff3ce5c, 0x7b525d94, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.23788=f(1.04000)*/
-{62, 0,123,__LINE__, 0x3ff40fcc, 0x06db2086, 0x3ff0cccc, 0xccccccd4},			/* 1.25385=f(1.05000)*/
-{63, 0,123,__LINE__, 0x3ff451bf, 0x0ca137e7, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.26995=f(1.06000)*/
-{61, 0,123,__LINE__, 0x3ff49437, 0x3cda235d, 0x3ff11eb8, 0x51eb8526},			/* 1.28618=f(1.07000)*/
-{62, 0,123,__LINE__, 0x3ff4d736, 0x4b241b96, 0x3ff147ae, 0x147ae14f},			/* 1.30254=f(1.08000)*/
-{63, 0,123,__LINE__, 0x3ff51abd, 0xee913928, 0x3ff170a3, 0xd70a3d78},			/* 1.31902=f(1.09000)*/
-{62, 0,123,__LINE__, 0x3ff55ecf, 0xe1b2b221, 0x3ff19999, 0x999999a1},			/* 1.33564=f(1.10000)*/
-{58, 0,123,__LINE__, 0x3ff5a36d, 0xe2a42e5f, 0x3ff1c28f, 0x5c28f5ca},			/* 1.35240=f(1.11000)*/
-{59, 0,123,__LINE__, 0x3ff5e899, 0xb317334f, 0x3ff1eb85, 0x1eb851f3},			/* 1.36928=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ff62e55, 0x185ea6f5, 0x3ff2147a, 0xe147ae1c},			/* 1.38631=f(1.13000)*/
-{63, 0,123,__LINE__, 0x3ff674a1, 0xdb7a6aee, 0x3ff23d70, 0xa3d70a45},			/* 1.40347=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ff6bb81, 0xc9230f6b, 0x3ff26666, 0x6666666e},			/* 1.42077=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ff702f6, 0xb1d59e9a, 0x3ff28f5c, 0x28f5c297},			/* 1.43822=f(1.16000)*/
-{61, 0,123,__LINE__, 0x3ff74b02, 0x69df80c3, 0x3ff2b851, 0xeb851ec0},			/* 1.45581=f(1.17000)*/
-{61, 0,123,__LINE__, 0x3ff793a6, 0xc96a7951, 0x3ff2e147, 0xae147ae9},			/* 1.47354=f(1.18000)*/
-{62, 0,123,__LINE__, 0x3ff7dce5, 0xac88bd50, 0x3ff30a3d, 0x70a3d712},			/* 1.49143=f(1.19000)*/
-{61, 0,123,__LINE__, 0xc070bbeb, 0x1603926c, 0xc01921fb, 0x54442d18},			/* -267.744=f(-6.28318)*/
-{60, 0,123,__LINE__, 0xc04bd3c3, 0x4cf00a27, 0xc012d97c, 0x7f3321d2},			/* -55.6543=f(-4.71238)*/
-{63, 0,123,__LINE__, 0xc02718f4, 0x5d72e671, 0xc00921fb, 0x54442d18},			/* -11.5487=f(-3.14159)*/
-{62, 0,123,__LINE__, 0xc002690f, 0x661dd821, 0xbff921fb, 0x54442d18},			/* -2.30129=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{62, 0,123,__LINE__, 0x4002690f, 0x661dd821, 0x3ff921fb, 0x54442d18},			/* 2.30129=f(1.57079)*/
-{63, 0,123,__LINE__, 0x402718f4, 0x5d72e671, 0x400921fb, 0x54442d18},			/* 11.5487=f(3.14159)*/
-{60, 0,123,__LINE__, 0x404bd3c3, 0x4cf00a27, 0x4012d97c, 0x7f3321d2},			/* 55.6543=f(4.71238)*/
-{63, 0,123,__LINE__, 0xc2937047, 0x0aec28e4, 0xc03e0000, 0x00000000},			/* -5.34324e+12=f(-30.0000)*/
-{63, 0,123,__LINE__, 0xc26c68ab, 0xda31cdb8, 0xc03c4ccc, 0xcccccccd},			/* -9.76121e+11=f(-28.3000)*/
-{60, 0,123,__LINE__, 0xc244c263, 0x8e2b5848, 0xc03a9999, 0x9999999a},			/* -1.78321e+11=f(-26.6000)*/
-{63, 0,123,__LINE__, 0xc21e56cf, 0x7144c252, 0xc038e666, 0x66666667},			/* -3.25764e+10=f(-24.9000)*/
-{60, 0,123,__LINE__, 0xc1f62b79, 0x1e77d137, 0xc0373333, 0x33333334},			/* -5.95116e+09=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xc1d03343, 0x003272a8, 0xc0358000, 0x00000001},			/* -1.08718e+09=f(-21.5000)*/
-{62, 0,123,__LINE__, 0xc1a7ad17, 0x51ce1a0d, 0xc033cccc, 0xccccccce},			/* -1.98610e+08=f(-19.8000)*/
-{62, 0,123,__LINE__, 0xc1814d0b, 0xc17d4222, 0xc0321999, 0x9999999b},			/* -3.62827e+07=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xc15948e8, 0xe47ead6c, 0xc0306666, 0x66666668},			/* -6.62826e+06=f(-16.4000)*/
-{63, 0,123,__LINE__, 0xc13279f9, 0xd10e66ed, 0xc02d6666, 0x6666666a},			/* -1.21087e+06=f(-14.7000)*/
-{62, 0,123,__LINE__, 0xc10b00b5, 0x916a31d1, 0xc02a0000, 0x00000004},			/* -221206=f(-13.0000)*/
-{63, 0,123,__LINE__, 0xc0e3bb5a, 0x33507fa0, 0xc0269999, 0x9999999e},			/* -40410=f(-11.3000)*/
-{63, 0,123,__LINE__, 0xc0bcd664, 0x081f1af4, 0xc0233333, 0x33333338},			/* -7382.39=f(-9.60000)*/
-{63, 0,123,__LINE__, 0xc0951290, 0x5cbc9963, 0xc01f9999, 0x999999a3},			/* -1348.64=f(-7.90000)*/
-{62, 0,123,__LINE__, 0xc06ecbf3, 0xc2804b35, 0xc018cccc, 0xccccccd6},			/* -246.373=f(-6.20000)*/
-{62, 0,123,__LINE__, 0xc0468062, 0xab5faa2d, 0xc0120000, 0x00000009},			/* -45.0030=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xc0206243, 0x1f5de430, 0xc0066666, 0x66666678},			/* -8.19191=f(-2.80000)*/
-{63, 0,123,__LINE__, 0xbff55ecf, 0xe1b2b250, 0xbff19999, 0x999999bd},			/* -1.33564=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe45f77, 0x5546a729, 0x3fe33333, 0x333332ec},			/* 0.63665=f(0.60000)*/
-{63, 0,123,__LINE__, 0x4013bf72, 0xea61aeeb, 0x40026666, 0x66666654},			/* 4.93696=f(2.30000)*/
-{61, 0,123,__LINE__, 0x403b4a38, 0x037035f3, 0x400fffff, 0xffffffee},			/* 27.2899=f(4.00000)*/
-{62, 0,123,__LINE__, 0x4062add3, 0x2b565d1a, 0x4016cccc, 0xccccccc4},			/* 149.432=f(5.70000)*/
-{64, 0,123,__LINE__, 0x40898fef, 0x6e2e3c20, 0x401d9999, 0x99999991},			/* 817.991=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40b17da5, 0x73a60dc4, 0x40223333, 0x3333332f},			/* 4477.64=f(9.10000)*/
-{60, 0,123,__LINE__, 0x40d7ef99, 0xa2bdfbc7, 0x40259999, 0x99999995},			/* 24510=f(10.8000)*/
-{64, 0,123,__LINE__, 0x410060c5, 0x2564c024, 0x4028ffff, 0xfffffffb},			/* 134168=f(12.5000)*/
-{62, 0,123,__LINE__, 0x412669c0, 0x308d2005, 0x402c6666, 0x66666661},			/* 734432=f(14.2000)*/
-{62, 0,123,__LINE__, 0x414eac09, 0x532f3d7e, 0x402fcccc, 0xccccccc7},			/* 4.02024e+06=f(15.9000)*/
-{61, 0,123,__LINE__, 0x4174fcb4, 0x4c4756d4, 0x40319999, 0x99999997},			/* 2.20066e+07=f(17.6000)*/
-{63, 0,123,__LINE__, 0x419cb879, 0xa3e73668, 0x40334ccc, 0xccccccca},			/* 1.20463e+08=f(19.3000)*/
-{57, 0,123,__LINE__, 0x41c3a6e1, 0xfd9eecbf, 0x4034ffff, 0xfffffffd},			/* 6.59408e+08=f(21.0000)*/
-{60, 0,123,__LINE__, 0x41eae4b2, 0x68df16f6, 0x4036b333, 0x33333330},			/* 3.60956e+09=f(22.7000)*/
-{63, 0,123,__LINE__, 0x421266ce, 0xffa84595, 0x40386666, 0x66666663},			/* 1.97586e+10=f(24.4000)*/
-{64, 0,123,__LINE__, 0x42392ead, 0xfa09870a, 0x403a1999, 0x99999996},			/* 1.08157e+11=f(26.1000)*/
-{63, 0,123,__LINE__, 0x42613b19, 0x1e69fb25, 0x403bcccc, 0xccccccc9},			/* 5.92048e+11=f(27.8000)*/
-{61, 0,123,__LINE__, 0x42879487, 0x9e85b8dc, 0x403d7fff, 0xfffffffc},			/* 3.24084e+12=f(29.5000)*/
-0,};
-test_sinh(m)   {run_vector_1(m,sinh_vec,(char *)(sinh),"sinh","dd");   }	
diff --git a/newlib/libm/test/sinhf_vec.c b/newlib/libm/test/sinhf_vec.c
deleted file mode 100644
index f15709c8b..000000000
--- a/newlib/libm/test/sinhf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type sinhf_vec[] = {
-{12, 0,123,__LINE__, 0xbff826c1, 0x00000000, 0xbff33333, 0x33333333},			/* -1.50946=f(-1.20000)*/
-{13, 0,123,__LINE__, 0xbff7dce5, 0xc0000000, 0xbff30a3d, 0x70a3d70a},			/* -1.49143=f(-1.19000)*/
-{13, 0,123,__LINE__, 0xbff793a6, 0xa0000000, 0xbff2e147, 0xae147ae1},			/* -1.47354=f(-1.18000)*/
-{13, 0,123,__LINE__, 0xbff74b02, 0x60000000, 0xbff2b851, 0xeb851eb8},			/* -1.45581=f(-1.17000)*/
-{13, 0,123,__LINE__, 0xbff702f6, 0xa0000000, 0xbff28f5c, 0x28f5c28f},			/* -1.43822=f(-1.16000)*/
-{13, 0,123,__LINE__, 0xbff6bb81, 0xe0000000, 0xbff26666, 0x66666666},			/* -1.42077=f(-1.15000)*/
-{13, 0,123,__LINE__, 0xbff674a1, 0xc0000000, 0xbff23d70, 0xa3d70a3d},			/* -1.40347=f(-1.14000)*/
-{13, 0,123,__LINE__, 0xbff62e55, 0x20000000, 0xbff2147a, 0xe147ae14},			/* -1.38631=f(-1.13000)*/
-{13, 0,123,__LINE__, 0xbff5e899, 0xc0000000, 0xbff1eb85, 0x1eb851eb},			/* -1.36928=f(-1.12000)*/
-{13, 0,123,__LINE__, 0xbff5a36e, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -1.35240=f(-1.11000)*/
-{13, 0,123,__LINE__, 0xbff55ed0, 0x00000000, 0xbff19999, 0x99999999},			/* -1.33564=f(-1.10000)*/
-{13, 0,123,__LINE__, 0xbff51abe, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* -1.31902=f(-1.09000)*/
-{13, 0,123,__LINE__, 0xbff4d736, 0x60000000, 0xbff147ae, 0x147ae147},			/* -1.30254=f(-1.08000)*/
-{13, 0,123,__LINE__, 0xbff49437, 0x40000000, 0xbff11eb8, 0x51eb851e},			/* -1.28618=f(-1.07000)*/
-{13, 0,123,__LINE__, 0xbff451be, 0xe0000000, 0xbff0f5c2, 0x8f5c28f5},			/* -1.26995=f(-1.06000)*/
-{13, 0,123,__LINE__, 0xbff40fcb, 0xe0000000, 0xbff0cccc, 0xcccccccc},			/* -1.25385=f(-1.05000)*/
-{14, 0,123,__LINE__, 0xbff3ce5c, 0x80000000, 0xbff0a3d7, 0x0a3d70a3},			/* -1.23788=f(-1.04000)*/
-{14, 0,123,__LINE__, 0xbff38d6e, 0xc0000000, 0xbff07ae1, 0x47ae147a},			/* -1.22202=f(-1.03000)*/
-{14, 0,123,__LINE__, 0xbff34d01, 0x20000000, 0xbff051eb, 0x851eb851},			/* -1.20630=f(-1.02000)*/
-{14, 0,123,__LINE__, 0xbff30d12, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* -1.19069=f(-1.01000)*/
-{14, 0,123,__LINE__, 0xbff2cd9f, 0xc0000000, 0xbfefffff, 0xfffffffe},			/* -1.17520=f(-0.01000)*/
-{11, 0,123,__LINE__, 0xbff28ea8, 0xc0000000, 0xbfefae14, 0x7ae147ac},			/* -1.15982=f(-0.99000)*/
-{11, 0,123,__LINE__, 0xbff2502b, 0x60000000, 0xbfef5c28, 0xf5c28f5a},			/* -1.14457=f(-0.98000)*/
-{11, 0,123,__LINE__, 0xbff21226, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* -1.12943=f(-0.97000)*/
-{11, 0,123,__LINE__, 0xbff1d497, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* -1.11440=f(-0.96000)*/
-{11, 0,123,__LINE__, 0xbff1977c, 0xe0000000, 0xbfee6666, 0x66666664},			/* -1.09948=f(-0.95000)*/
-{11, 0,123,__LINE__, 0xbff15ad6, 0x00000000, 0xbfee147a, 0xe147ae12},			/* -1.08467=f(-0.94000)*/
-{11, 0,123,__LINE__, 0xbff11ea1, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* -1.06997=f(-0.93000)*/
-{11, 0,123,__LINE__, 0xbff0e2dc, 0x20000000, 0xbfed70a3, 0xd70a3d6e},			/* -1.05538=f(-0.92000)*/
-{11, 0,123,__LINE__, 0xbff0a785, 0xe0000000, 0xbfed1eb8, 0x51eb851c},			/* -1.04089=f(-0.91000)*/
-{11, 0,123,__LINE__, 0xbff06c9c, 0xc0000000, 0xbfeccccc, 0xccccccca},			/* -1.02651=f(-0.90000)*/
-{11, 0,123,__LINE__, 0xbff0321f, 0x60000000, 0xbfec7ae1, 0x47ae1478},			/* -1.01223=f(-0.89000)*/
-{14, 0,123,__LINE__, 0xbfeff018, 0x20000000, 0xbfec28f5, 0xc28f5c26},			/* -0.99805=f(-0.88000)*/
-{13, 0,123,__LINE__, 0xbfef7cc2, 0xe0000000, 0xbfebd70a, 0x3d70a3d4},			/* -0.98397=f(-0.87000)*/
-{13, 0,123,__LINE__, 0xbfef0a3c, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* -0.96999=f(-0.86000)*/
-{13, 0,123,__LINE__, 0xbfee9880, 0x80000000, 0xbfeb3333, 0x33333330},			/* -0.95611=f(-0.85000)*/
-{13, 0,123,__LINE__, 0xbfee278d, 0x80000000, 0xbfeae147, 0xae147ade},			/* -0.94232=f(-0.84000)*/
-{13, 0,123,__LINE__, 0xbfedb760, 0x20000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.92863=f(-0.83000)*/
-{13, 0,123,__LINE__, 0xbfed47f5, 0x80000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.91503=f(-0.82000)*/
-{13, 0,123,__LINE__, 0xbfecd94a, 0xe0000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.90152=f(-0.81000)*/
-{13, 0,123,__LINE__, 0xbfec6b5d, 0x40000000, 0xbfe99999, 0x99999996},			/* -0.88810=f(-0.80000)*/
-{14, 0,123,__LINE__, 0xbfebfe29, 0xe0000000, 0xbfe947ae, 0x147ae144},			/* -0.87477=f(-0.79000)*/
-{14, 0,123,__LINE__, 0xbfeb91ad, 0xe0000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.86153=f(-0.78000)*/
-{14, 0,123,__LINE__, 0xbfeb25e6, 0xa0000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.84837=f(-0.77000)*/
-{14, 0,123,__LINE__, 0xbfeabad1, 0x60000000, 0xbfe851eb, 0x851eb84e},			/* -0.83530=f(-0.76000)*/
-{14, 0,123,__LINE__, 0xbfea506b, 0x20000000, 0xbfe7ffff, 0xfffffffc},			/* -0.82231=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbfe9e6b1, 0x80000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.80941=f(-0.74000)*/
-{12, 0,123,__LINE__, 0xbfe97da1, 0xa0000000, 0xbfe75c28, 0xf5c28f58},			/* -0.79658=f(-0.73000)*/
-{12, 0,123,__LINE__, 0xbfe91538, 0xc0000000, 0xbfe70a3d, 0x70a3d706},			/* -0.78384=f(-0.72000)*/
-{12, 0,123,__LINE__, 0xbfe8ad74, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* -0.77117=f(-0.71000)*/
-{12, 0,123,__LINE__, 0xbfe84651, 0x40000000, 0xbfe66666, 0x66666662},			/* -0.75858=f(-0.70000)*/
-{15, 0,123,__LINE__, 0xbfe7dfcd, 0xa0000000, 0xbfe6147a, 0xe147ae10},			/* -0.74606=f(-0.69000)*/
-{14, 0,123,__LINE__, 0xbfe779e6, 0x60000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.73363=f(-0.68000)*/
-{14, 0,123,__LINE__, 0xbfe71499, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.72126=f(-0.67000)*/
-{14, 0,123,__LINE__, 0xbfe6afe3, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* -0.70897=f(-0.66000)*/
-{14, 0,123,__LINE__, 0xbfe64bc1, 0x60000000, 0xbfe4cccc, 0xccccccc8},			/* -0.69674=f(-0.65000)*/
-{15, 0,123,__LINE__, 0xbfe5e832, 0x20000000, 0xbfe47ae1, 0x47ae1476},			/* -0.68459=f(-0.64000)*/
-{15, 0,123,__LINE__, 0xbfe58532, 0x60000000, 0xbfe428f5, 0xc28f5c24},			/* -0.67250=f(-0.63000)*/
-{13, 0,123,__LINE__, 0xbfe522bf, 0xc0000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.66049=f(-0.62000)*/
-{13, 0,123,__LINE__, 0xbfe4c0d7, 0x80000000, 0xbfe3851e, 0xb851eb80},			/* -0.64854=f(-0.61000)*/
-{13, 0,123,__LINE__, 0xbfe45f77, 0x60000000, 0xbfe33333, 0x3333332e},			/* -0.63665=f(-0.60000)*/
-{15, 0,123,__LINE__, 0xbfe3fe9c, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* -0.62483=f(-0.59000)*/
-{15, 0,123,__LINE__, 0xbfe39e45, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.61307=f(-0.58000)*/
-{15, 0,123,__LINE__, 0xbfe33e6e, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* -0.60137=f(-0.57000)*/
-{14, 0,123,__LINE__, 0xbfe2df15, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.58973=f(-0.56000)*/
-{14, 0,123,__LINE__, 0xbfe28037, 0xe0000000, 0xbfe19999, 0x99999994},			/* -0.57815=f(-0.55000)*/
-{14, 0,123,__LINE__, 0xbfe221d3, 0xe0000000, 0xbfe147ae, 0x147ae142},			/* -0.56662=f(-0.54000)*/
-{15, 0,123,__LINE__, 0xbfe1c3e6, 0x80000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.55516=f(-0.53000)*/
-{15, 0,123,__LINE__, 0xbfe1666d, 0xc0000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.54375=f(-0.52000)*/
-{15, 0,123,__LINE__, 0xbfe10967, 0x20000000, 0xbfe051eb, 0x851eb84c},			/* -0.53239=f(-0.51000)*/
-{16, 0,123,__LINE__, 0xbfe0acd0, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* -0.52109=f(-0.50000)*/
-{10, 0,123,__LINE__, 0xbfe050a6, 0x40000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.50984=f(-0.49000)*/
-{15, 0,123,__LINE__, 0xbfdfe9ce, 0xc0000000, 0xbfdeb851, 0xeb851eac},			/* -0.49864=f(-0.48000)*/
-{15, 0,123,__LINE__, 0xbfdf3322, 0x40000000, 0xbfde147a, 0xe147ae08},			/* -0.48749=f(-0.47000)*/
-{14, 0,123,__LINE__, 0xbfde7d42, 0x40000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.47639=f(-0.46000)*/
-{15, 0,123,__LINE__, 0xbfddc829, 0xe0000000, 0xbfdccccc, 0xccccccc0},			/* -0.46534=f(-0.45000)*/
-{15, 0,123,__LINE__, 0xbfdd13d4, 0xc0000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.45433=f(-0.44000)*/
-{13, 0,123,__LINE__, 0xbfdc603e, 0x40000000, 0xbfdb851e, 0xb851eb78},			/* -0.44337=f(-0.43000)*/
-{15, 0,123,__LINE__, 0xbfdbad61, 0xa0000000, 0xbfdae147, 0xae147ad4},			/* -0.43245=f(-0.42000)*/
-{16, 0,123,__LINE__, 0xbfdafb3a, 0x80000000, 0xbfda3d70, 0xa3d70a30},			/* -0.42158=f(-0.41000)*/
-{14, 0,123,__LINE__, 0xbfda49c4, 0x20000000, 0xbfd99999, 0x9999998c},			/* -0.41075=f(-0.40000)*/
-{15, 0,123,__LINE__, 0xbfd998fa, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.39996=f(-0.39000)*/
-{16, 0,123,__LINE__, 0xbfd8e8d7, 0xc0000000, 0xbfd851eb, 0x851eb844},			/* -0.38921=f(-0.38000)*/
-{12, 0,123,__LINE__, 0xbfd83958, 0xa0000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.37850=f(-0.37000)*/
-{16, 0,123,__LINE__, 0xbfd78a78, 0x60000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.36782=f(-0.36000)*/
-{16, 0,123,__LINE__, 0xbfd6dc32, 0x40000000, 0xbfd66666, 0x66666658},			/* -0.35718=f(-0.35000)*/
-{14, 0,123,__LINE__, 0xbfd62e82, 0x20000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.34658=f(-0.34000)*/
-{16, 0,123,__LINE__, 0xbfd58163, 0x40000000, 0xbfd51eb8, 0x51eb8510},			/* -0.33602=f(-0.33000)*/
-{16, 0,123,__LINE__, 0xbfd4d4d1, 0x40000000, 0xbfd47ae1, 0x47ae146c},			/* -0.32548=f(-0.32000)*/
-{13, 0,123,__LINE__, 0xbfd428c8, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.31498=f(-0.31000)*/
-{17, 0,123,__LINE__, 0xbfd37d42, 0xc0000000, 0xbfd33333, 0x33333324},			/* -0.30452=f(-0.30000)*/
-{17, 0,123,__LINE__, 0xbfd2d23d, 0x20000000, 0xbfd28f5c, 0x28f5c280},			/* -0.29408=f(-0.29000)*/
-{14, 0,123,__LINE__, 0xbfd227b3, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.28367=f(-0.28000)*/
-{18, 0,123,__LINE__, 0xbfd17d9f, 0xc0000000, 0xbfd147ae, 0x147ae138},			/* -0.27329=f(-0.27000)*/
-{17, 0,123,__LINE__, 0xbfd0d3ff, 0x20000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26293=f(-0.26000)*/
-{18, 0,123,__LINE__, 0xbfd02acc, 0xe0000000, 0xbfcfffff, 0xffffffe0},			/* -0.25261=f(-0.25000)*/
-{15, 0,123,__LINE__, 0xbfcf0409, 0x00000000, 0xbfceb851, 0xeb851e98},			/* -0.24231=f(-0.24000)*/
-{16, 0,123,__LINE__, 0xbfcdb343, 0xa0000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.23203=f(-0.23000)*/
-{17, 0,123,__LINE__, 0xbfcc6340, 0xc0000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.22177=f(-0.22000)*/
-{15, 0,123,__LINE__, 0xbfcb13f8, 0x00000000, 0xbfcae147, 0xae147ac0},			/* -0.21154=f(-0.21000)*/
-{17, 0,123,__LINE__, 0xbfc9c560, 0xe0000000, 0xbfc99999, 0x99999978},			/* -0.20133=f(-0.20000)*/
-{18, 0,123,__LINE__, 0xbfc87772, 0x60000000, 0xbfc851eb, 0x851eb830},			/* -0.19114=f(-0.19000)*/
-{18, 0,123,__LINE__, 0xbfc72a24, 0x80000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18097=f(-0.18000)*/
-{19, 0,123,__LINE__, 0xbfc5dd6e, 0x20000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17082=f(-0.17000)*/
-{16, 0,123,__LINE__, 0xbfc49147, 0x40000000, 0xbfc47ae1, 0x47ae1458},			/* -0.16068=f(-0.16000)*/
-{17, 0,123,__LINE__, 0xbfc345a7, 0x20000000, 0xbfc33333, 0x33333310},			/* -0.15056=f(-0.15000)*/
-{19, 0,123,__LINE__, 0xbfc1fa85, 0x40000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.14045=f(-0.14000)*/
-{20, 0,123,__LINE__, 0xbfc0afd9, 0x40000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13036=f(-0.13000)*/
-{17, 0,123,__LINE__, 0xbfbecb35, 0x40000000, 0xbfbeb851, 0xeb851e71},			/* -0.12028=f(-0.12000)*/
-{19, 0,123,__LINE__, 0xbfbc3781, 0xc0000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.11022=f(-0.11000)*/
-{18, 0,123,__LINE__, 0xbfb9a487, 0x40000000, 0xbfb99999, 0x99999953},			/* -0.10016=f(-0.00100)*/
-{19, 0,123,__LINE__, 0xbfb71234, 0xc0000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09012=f(-0.09000)*/
-{16, 0,123,__LINE__, 0xbfb48079, 0x60000000, 0xbfb47ae1, 0x47ae1435},			/* -0.08008=f(-0.08000)*/
-{21, 0,123,__LINE__, 0xbfb1ef44, 0x80000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.07005=f(-0.07000)*/
-{21, 0,123,__LINE__, 0xbfaebd0a, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* -0.06003=f(-0.06000)*/
-{21, 0,123,__LINE__, 0xbfa99c54, 0xc0000000, 0xbfa99999, 0x9999990e},			/* -0.05002=f(-0.05000)*/
-{21, 0,123,__LINE__, 0xbfa47c47, 0x40000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.04001=f(-0.04000)*/
-{23, 0,123,__LINE__, 0xbf9eb97f, 0xe0000000, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{23, 0,123,__LINE__, 0xbf947b3a, 0xc0000000, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{27, 0,123,__LINE__, 0xbf847af7, 0xa0000000, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{27, 0,123,__LINE__, 0x3f847af7, 0xa0000000, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{23, 0,123,__LINE__, 0x3f947b3a, 0xc0000000, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{23, 0,123,__LINE__, 0x3f9eb97f, 0xe0000000, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{21, 0,123,__LINE__, 0x3fa47c47, 0x40000000, 0x3fa47ae1, 0x47ae1508},			/* 0.04001=f(0.04000)*/
-{21, 0,123,__LINE__, 0x3fa99c54, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 0.05002=f(0.05000)*/
-{21, 0,123,__LINE__, 0x3faebd0a, 0x00000000, 0x3faeb851, 0xeb851f46},			/* 0.06003=f(0.06000)*/
-{21, 0,123,__LINE__, 0x3fb1ef44, 0x80000000, 0x3fb1eb85, 0x1eb85232},			/* 0.07005=f(0.07000)*/
-{16, 0,123,__LINE__, 0x3fb48079, 0x60000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.08008=f(0.08000)*/
-{19, 0,123,__LINE__, 0x3fb71234, 0xc0000000, 0x3fb70a3d, 0x70a3d750},			/* 0.09012=f(0.09000)*/
-{18, 0,123,__LINE__, 0x3fb9a487, 0x40000000, 0x3fb99999, 0x999999df},			/* 0.10016=f(0.10000)*/
-{19, 0,123,__LINE__, 0x3fbc3781, 0xc0000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11022=f(0.11000)*/
-{17, 0,123,__LINE__, 0x3fbecb35, 0x40000000, 0x3fbeb851, 0xeb851efd},			/* 0.12028=f(0.12000)*/
-{20, 0,123,__LINE__, 0x3fc0afd9, 0x40000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13036=f(0.13000)*/
-{19, 0,123,__LINE__, 0x3fc1fa85, 0x40000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.14045=f(0.14000)*/
-{17, 0,123,__LINE__, 0x3fc345a7, 0x20000000, 0x3fc33333, 0x33333356},			/* 0.15056=f(0.15000)*/
-{16, 0,123,__LINE__, 0x3fc49147, 0x40000000, 0x3fc47ae1, 0x47ae149e},			/* 0.16068=f(0.16000)*/
-{19, 0,123,__LINE__, 0x3fc5dd6e, 0x20000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17082=f(0.17000)*/
-{18, 0,123,__LINE__, 0x3fc72a24, 0x80000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.18097=f(0.18000)*/
-{18, 0,123,__LINE__, 0x3fc87772, 0x60000000, 0x3fc851eb, 0x851eb876},			/* 0.19114=f(0.19000)*/
-{17, 0,123,__LINE__, 0x3fc9c560, 0xe0000000, 0x3fc99999, 0x999999be},			/* 0.20133=f(0.20000)*/
-{15, 0,123,__LINE__, 0x3fcb13f8, 0x00000000, 0x3fcae147, 0xae147b06},			/* 0.21154=f(0.21000)*/
-{17, 0,123,__LINE__, 0x3fcc6340, 0xc0000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22177=f(0.22000)*/
-{16, 0,123,__LINE__, 0x3fcdb343, 0xa0000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.23203=f(0.23000)*/
-{15, 0,123,__LINE__, 0x3fcf0409, 0x00000000, 0x3fceb851, 0xeb851ede},			/* 0.24231=f(0.24000)*/
-{18, 0,123,__LINE__, 0x3fd02acc, 0xe0000000, 0x3fd00000, 0x00000013},			/* 0.25261=f(0.25000)*/
-{17, 0,123,__LINE__, 0x3fd0d3ff, 0x20000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26293=f(0.26000)*/
-{18, 0,123,__LINE__, 0x3fd17d9f, 0xc0000000, 0x3fd147ae, 0x147ae15b},			/* 0.27329=f(0.27000)*/
-{14, 0,123,__LINE__, 0x3fd227b3, 0x00000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.28367=f(0.28000)*/
-{17, 0,123,__LINE__, 0x3fd2d23d, 0x20000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29408=f(0.29000)*/
-{17, 0,123,__LINE__, 0x3fd37d42, 0xc0000000, 0x3fd33333, 0x33333347},			/* 0.30452=f(0.30000)*/
-{13, 0,123,__LINE__, 0x3fd428c8, 0x00000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.31498=f(0.31000)*/
-{16, 0,123,__LINE__, 0x3fd4d4d1, 0x40000000, 0x3fd47ae1, 0x47ae148f},			/* 0.32548=f(0.32000)*/
-{16, 0,123,__LINE__, 0x3fd58163, 0x40000000, 0x3fd51eb8, 0x51eb8533},			/* 0.33602=f(0.33000)*/
-{14, 0,123,__LINE__, 0x3fd62e82, 0x20000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.34658=f(0.34000)*/
-{16, 0,123,__LINE__, 0x3fd6dc32, 0x40000000, 0x3fd66666, 0x6666667b},			/* 0.35718=f(0.35000)*/
-{16, 0,123,__LINE__, 0x3fd78a78, 0x60000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.36782=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3fd83958, 0xa0000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.37850=f(0.37000)*/
-{16, 0,123,__LINE__, 0x3fd8e8d7, 0xc0000000, 0x3fd851eb, 0x851eb867},			/* 0.38921=f(0.38000)*/
-{15, 0,123,__LINE__, 0x3fd998fa, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.39996=f(0.39000)*/
-{14, 0,123,__LINE__, 0x3fda49c4, 0x20000000, 0x3fd99999, 0x999999af},			/* 0.41075=f(0.40000)*/
-{16, 0,123,__LINE__, 0x3fdafb3a, 0x80000000, 0x3fda3d70, 0xa3d70a53},			/* 0.42158=f(0.41000)*/
-{15, 0,123,__LINE__, 0x3fdbad61, 0xa0000000, 0x3fdae147, 0xae147af7},			/* 0.43245=f(0.42000)*/
-{13, 0,123,__LINE__, 0x3fdc603e, 0x40000000, 0x3fdb851e, 0xb851eb9b},			/* 0.44337=f(0.43000)*/
-{15, 0,123,__LINE__, 0x3fdd13d4, 0xc0000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.45433=f(0.44000)*/
-{15, 0,123,__LINE__, 0x3fddc829, 0xe0000000, 0x3fdccccc, 0xcccccce3},			/* 0.46534=f(0.45000)*/
-{14, 0,123,__LINE__, 0x3fde7d42, 0x40000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.47639=f(0.46000)*/
-{15, 0,123,__LINE__, 0x3fdf3322, 0x40000000, 0x3fde147a, 0xe147ae2b},			/* 0.48749=f(0.47000)*/
-{15, 0,123,__LINE__, 0x3fdfe9ce, 0xc0000000, 0x3fdeb851, 0xeb851ecf},			/* 0.49864=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fe050a6, 0x40000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.50984=f(0.49000)*/
-{16, 0,123,__LINE__, 0x3fe0acd0, 0x00000000, 0x3fe00000, 0x0000000b},			/* 0.52109=f(0.50000)*/
-{15, 0,123,__LINE__, 0x3fe10967, 0x20000000, 0x3fe051eb, 0x851eb85d},			/* 0.53239=f(0.51000)*/
-{15, 0,123,__LINE__, 0x3fe1666d, 0xc0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.54375=f(0.52000)*/
-{15, 0,123,__LINE__, 0x3fe1c3e6, 0x80000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.55516=f(0.53000)*/
-{14, 0,123,__LINE__, 0x3fe221d3, 0xe0000000, 0x3fe147ae, 0x147ae153},			/* 0.56662=f(0.54000)*/
-{14, 0,123,__LINE__, 0x3fe28037, 0xe0000000, 0x3fe19999, 0x999999a5},			/* 0.57815=f(0.55000)*/
-{14, 0,123,__LINE__, 0x3fe2df15, 0x00000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.58973=f(0.56000)*/
-{15, 0,123,__LINE__, 0x3fe33e6e, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 0.60137=f(0.57000)*/
-{15, 0,123,__LINE__, 0x3fe39e45, 0x00000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.61307=f(0.58000)*/
-{15, 0,123,__LINE__, 0x3fe3fe9c, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 0.62483=f(0.59000)*/
-{13, 0,123,__LINE__, 0x3fe45f77, 0x60000000, 0x3fe33333, 0x3333333f},			/* 0.63665=f(0.60000)*/
-{13, 0,123,__LINE__, 0x3fe4c0d7, 0x80000000, 0x3fe3851e, 0xb851eb91},			/* 0.64854=f(0.61000)*/
-{13, 0,123,__LINE__, 0x3fe522bf, 0xc0000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.66049=f(0.62000)*/
-{15, 0,123,__LINE__, 0x3fe58532, 0x60000000, 0x3fe428f5, 0xc28f5c35},			/* 0.67250=f(0.63000)*/
-{15, 0,123,__LINE__, 0x3fe5e832, 0x20000000, 0x3fe47ae1, 0x47ae1487},			/* 0.68459=f(0.64000)*/
-{14, 0,123,__LINE__, 0x3fe64bc1, 0x60000000, 0x3fe4cccc, 0xccccccd9},			/* 0.69674=f(0.65000)*/
-{14, 0,123,__LINE__, 0x3fe6afe3, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.70897=f(0.66000)*/
-{14, 0,123,__LINE__, 0x3fe71499, 0x00000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.72126=f(0.67000)*/
-{14, 0,123,__LINE__, 0x3fe779e6, 0x60000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.73363=f(0.68000)*/
-{15, 0,123,__LINE__, 0x3fe7dfcd, 0xa0000000, 0x3fe6147a, 0xe147ae21},			/* 0.74606=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3fe84651, 0x40000000, 0x3fe66666, 0x66666673},			/* 0.75858=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3fe8ad74, 0x00000000, 0x3fe6b851, 0xeb851ec5},			/* 0.77117=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3fe91538, 0xc0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.78384=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3fe97da1, 0xa0000000, 0x3fe75c28, 0xf5c28f69},			/* 0.79658=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3fe9e6b1, 0x80000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.80941=f(0.74000)*/
-{14, 0,123,__LINE__, 0x3fea506b, 0x20000000, 0x3fe80000, 0x0000000d},			/* 0.82231=f(0.75000)*/
-{14, 0,123,__LINE__, 0x3feabad1, 0x60000000, 0x3fe851eb, 0x851eb85f},			/* 0.83530=f(0.76000)*/
-{14, 0,123,__LINE__, 0x3feb25e6, 0xa0000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.84837=f(0.77000)*/
-{14, 0,123,__LINE__, 0x3feb91ad, 0xe0000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.86153=f(0.78000)*/
-{14, 0,123,__LINE__, 0x3febfe29, 0xe0000000, 0x3fe947ae, 0x147ae155},			/* 0.87477=f(0.79000)*/
-{13, 0,123,__LINE__, 0x3fec6b5d, 0x40000000, 0x3fe99999, 0x999999a7},			/* 0.88810=f(0.80000)*/
-{13, 0,123,__LINE__, 0x3fecd94a, 0xe0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.90152=f(0.81000)*/
-{13, 0,123,__LINE__, 0x3fed47f5, 0x80000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.91503=f(0.82000)*/
-{13, 0,123,__LINE__, 0x3fedb760, 0x20000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.92863=f(0.83000)*/
-{13, 0,123,__LINE__, 0x3fee278d, 0x80000000, 0x3feae147, 0xae147aef},			/* 0.94232=f(0.84000)*/
-{13, 0,123,__LINE__, 0x3fee9880, 0x80000000, 0x3feb3333, 0x33333341},			/* 0.95611=f(0.85000)*/
-{13, 0,123,__LINE__, 0x3fef0a3c, 0x00000000, 0x3feb851e, 0xb851eb93},			/* 0.96999=f(0.86000)*/
-{13, 0,123,__LINE__, 0x3fef7cc2, 0xe0000000, 0x3febd70a, 0x3d70a3e5},			/* 0.98397=f(0.87000)*/
-{14, 0,123,__LINE__, 0x3feff018, 0x20000000, 0x3fec28f5, 0xc28f5c37},			/* 0.99805=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3ff0321f, 0x60000000, 0x3fec7ae1, 0x47ae1489},			/* 1.01223=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3ff06c9c, 0xc0000000, 0x3feccccc, 0xccccccdb},			/* 1.02651=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3ff0a785, 0xe0000000, 0x3fed1eb8, 0x51eb852d},			/* 1.04089=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3ff0e2dc, 0x20000000, 0x3fed70a3, 0xd70a3d7f},			/* 1.05538=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3ff11ea1, 0x00000000, 0x3fedc28f, 0x5c28f5d1},			/* 1.06997=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3ff15ad6, 0x00000000, 0x3fee147a, 0xe147ae23},			/* 1.08467=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3ff1977c, 0xe0000000, 0x3fee6666, 0x66666675},			/* 1.09948=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3ff1d497, 0x00000000, 0x3feeb851, 0xeb851ec7},			/* 1.11440=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3ff21226, 0x00000000, 0x3fef0a3d, 0x70a3d719},			/* 1.12943=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3ff2502b, 0x60000000, 0x3fef5c28, 0xf5c28f6b},			/* 1.14457=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3ff28ea8, 0xc0000000, 0x3fefae14, 0x7ae147bd},			/* 1.15982=f(0.99000)*/
-{14, 0,123,__LINE__, 0x3ff2cd9f, 0xc0000000, 0x3ff00000, 0x00000007},			/* 1.17520=f(1.00000)*/
-{14, 0,123,__LINE__, 0x3ff30d12, 0x00000000, 0x3ff028f5, 0xc28f5c30},			/* 1.19069=f(1.01000)*/
-{14, 0,123,__LINE__, 0x3ff34d01, 0x20000000, 0x3ff051eb, 0x851eb859},			/* 1.20630=f(1.02000)*/
-{14, 0,123,__LINE__, 0x3ff38d6e, 0xc0000000, 0x3ff07ae1, 0x47ae1482},			/* 1.22202=f(1.03000)*/
-{14, 0,123,__LINE__, 0x3ff3ce5c, 0x80000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.23788=f(1.04000)*/
-{13, 0,123,__LINE__, 0x3ff40fcb, 0xe0000000, 0x3ff0cccc, 0xccccccd4},			/* 1.25385=f(1.05000)*/
-{13, 0,123,__LINE__, 0x3ff451be, 0xe0000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.26995=f(1.06000)*/
-{13, 0,123,__LINE__, 0x3ff49437, 0x40000000, 0x3ff11eb8, 0x51eb8526},			/* 1.28618=f(1.07000)*/
-{13, 0,123,__LINE__, 0x3ff4d736, 0x60000000, 0x3ff147ae, 0x147ae14f},			/* 1.30254=f(1.08000)*/
-{13, 0,123,__LINE__, 0x3ff51abe, 0x00000000, 0x3ff170a3, 0xd70a3d78},			/* 1.31902=f(1.09000)*/
-{13, 0,123,__LINE__, 0x3ff55ed0, 0x00000000, 0x3ff19999, 0x999999a1},			/* 1.33564=f(1.10000)*/
-{13, 0,123,__LINE__, 0x3ff5a36e, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.35240=f(1.11000)*/
-{13, 0,123,__LINE__, 0x3ff5e899, 0xc0000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.36928=f(1.12000)*/
-{13, 0,123,__LINE__, 0x3ff62e55, 0x20000000, 0x3ff2147a, 0xe147ae1c},			/* 1.38631=f(1.13000)*/
-{13, 0,123,__LINE__, 0x3ff674a1, 0xc0000000, 0x3ff23d70, 0xa3d70a45},			/* 1.40347=f(1.14000)*/
-{13, 0,123,__LINE__, 0x3ff6bb81, 0xe0000000, 0x3ff26666, 0x6666666e},			/* 1.42077=f(1.15000)*/
-{13, 0,123,__LINE__, 0x3ff702f6, 0xa0000000, 0x3ff28f5c, 0x28f5c297},			/* 1.43822=f(1.16000)*/
-{13, 0,123,__LINE__, 0x3ff74b02, 0x60000000, 0x3ff2b851, 0xeb851ec0},			/* 1.45581=f(1.17000)*/
-{13, 0,123,__LINE__, 0x3ff793a6, 0xa0000000, 0x3ff2e147, 0xae147ae9},			/* 1.47354=f(1.18000)*/
-{13, 0,123,__LINE__, 0x3ff7dce5, 0xc0000000, 0x3ff30a3d, 0x70a3d712},			/* 1.49143=f(1.19000)*/
-{ 0, 0,123,__LINE__, 0xc070bbea, 0xc0000000, 0xc01921fb, 0x54442d18},			/* -267.744=f(-6.28318)*/
-{ 0, 0,123,__LINE__, 0xc04bd3c3, 0x40000000, 0xc012d97c, 0x7f3321d2},			/* -55.6543=f(-4.71238)*/
-{ 8, 0,123,__LINE__, 0xc02718f4, 0x60000000, 0xc00921fb, 0x54442d18},			/* -11.5487=f(-3.14159)*/
-{ 1, 0,123,__LINE__, 0xc002690f, 0x60000000, 0xbff921fb, 0x54442d18},			/* -2.30129=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 1, 0,123,__LINE__, 0x4002690f, 0x60000000, 0x3ff921fb, 0x54442d18},			/* 2.30129=f(1.57079)*/
-{ 8, 0,123,__LINE__, 0x402718f4, 0x60000000, 0x400921fb, 0x54442d18},			/* 11.5487=f(3.14159)*/
-{ 9, 0,123,__LINE__, 0x404bd3c3, 0x40000000, 0x4012d97c, 0x7f3321d2},			/* 55.6543=f(4.71238)*/
-{ 0, 0,123,__LINE__, 0xc2937046, 0x40000000, 0xc03e0000, 0x00000000},			/* -5.34323e+12=f(-30.0000)*/
-{ 0, 0,123,__LINE__, 0xc26c68a8, 0x80000000, 0xc03c4ccc, 0xcccccccd},			/* -9.76120e+11=f(-28.3000)*/
-{ 0, 0,123,__LINE__, 0xc244c263, 0x20000000, 0xc03a9999, 0x9999999a},			/* -1.78321e+11=f(-26.6000)*/
-{ 0, 0,123,__LINE__, 0xc21e56cc, 0x40000000, 0xc038e666, 0x66666667},			/* -3.25763e+10=f(-24.9000)*/
-{ 0, 0,123,__LINE__, 0xc1f62b78, 0xe0000000, 0xc0373333, 0x33333334},			/* -5.95116e+09=f(-23.2000)*/
-{ 0, 0,123,__LINE__, 0xc1d03342, 0xe0000000, 0xc0358000, 0x00000001},			/* -1.08718e+09=f(-21.5000)*/
-{ 0, 0,123,__LINE__, 0xc1a7ad15, 0x80000000, 0xc033cccc, 0xccccccce},			/* -1.98610e+08=f(-19.8000)*/
-{ 0, 0,123,__LINE__, 0xc1814d0b, 0xe0000000, 0xc0321999, 0x9999999b},			/* -3.62827e+07=f(-18.1000)*/
-{ 0, 0,123,__LINE__, 0xc15948e7, 0x20000000, 0xc0306666, 0x66666668},			/* -6.62825e+06=f(-16.4000)*/
-{ 0, 0,123,__LINE__, 0xc13279fa, 0x40000000, 0xc02d6666, 0x6666666a},			/* -1.21087e+06=f(-14.7000)*/
-{ 0, 0,123,__LINE__, 0xc10b00b6, 0x80000000, 0xc02a0000, 0x00000004},			/* -221206=f(-13.0000)*/
-{ 0, 0,123,__LINE__, 0xc0e3bb5a, 0x20000000, 0xc0269999, 0x9999999e},			/* -40410=f(-11.3000)*/
-{ 0, 0,123,__LINE__, 0xc0bcd664, 0x40000000, 0xc0233333, 0x33333338},			/* -7382.39=f(-9.60000)*/
-{ 0, 0,123,__LINE__, 0xc0951290, 0xa0000000, 0xc01f9999, 0x999999a3},			/* -1348.64=f(-7.90000)*/
-{ 0, 0,123,__LINE__, 0xc06ecbf3, 0x20000000, 0xc018cccc, 0xccccccd6},			/* -246.373=f(-6.20000)*/
-{ 0, 0,123,__LINE__, 0xc0468062, 0xc0000000, 0xc0120000, 0x00000009},			/* -45.0030=f(-4.50000)*/
-{11, 0,123,__LINE__, 0xc0206243, 0x00000000, 0xc0066666, 0x66666678},			/* -8.19191=f(-2.80000)*/
-{13, 0,123,__LINE__, 0xbff55ed0, 0x00000000, 0xbff19999, 0x999999bd},			/* -1.33564=f(-1.10000)*/
-{13, 0,123,__LINE__, 0x3fe45f77, 0x60000000, 0x3fe33333, 0x333332ec},			/* 0.63665=f(0.60000)*/
-{11, 0,123,__LINE__, 0x4013bf72, 0xc0000000, 0x40026666, 0x66666654},			/* 4.93696=f(2.30000)*/
-{10, 0,123,__LINE__, 0x403b4a37, 0xe0000000, 0x400fffff, 0xffffffee},			/* 27.2899=f(4.00000)*/
-{ 9, 0,123,__LINE__, 0x4062add2, 0xc0000000, 0x4016cccc, 0xccccccc4},			/* 149.431=f(5.70000)*/
-{ 8, 0,123,__LINE__, 0x40898fef, 0x60000000, 0x401d9999, 0x99999991},			/* 817.991=f(7.40000)*/
-{ 8, 0,123,__LINE__, 0x40b17da6, 0x20000000, 0x40223333, 0x3333332f},			/* 4477.64=f(9.10000)*/
-{ 8, 0,123,__LINE__, 0x40d7ef9a, 0x60000000, 0x40259999, 0x99999995},			/* 24510=f(10.8000)*/
-{ 7, 0,123,__LINE__, 0x410060c5, 0x80000000, 0x4028ffff, 0xfffffffb},			/* 134168=f(12.5000)*/
-{ 7, 0,123,__LINE__, 0x412669c0, 0x80000000, 0x402c6666, 0x66666661},			/* 734432=f(14.2000)*/
-{ 7, 0,123,__LINE__, 0x414eac09, 0x80000000, 0x402fcccc, 0xccccccc7},			/* 4.02024e+06=f(15.9000)*/
-{ 7, 0,123,__LINE__, 0x4174fcb4, 0x40000000, 0x40319999, 0x99999997},			/* 2.20066e+07=f(17.6000)*/
-{ 7, 0,123,__LINE__, 0x419cb879, 0x60000000, 0x40334ccc, 0xccccccca},			/* 1.20463e+08=f(19.3000)*/
-{ 7, 0,123,__LINE__, 0x41c3a6e1, 0xa0000000, 0x4034ffff, 0xfffffffd},			/* 6.59408e+08=f(21.0000)*/
-{ 7, 0,123,__LINE__, 0x41eae4b4, 0x20000000, 0x4036b333, 0x33333330},			/* 3.60957e+09=f(22.7000)*/
-{ 6, 0,123,__LINE__, 0x421266cf, 0xe0000000, 0x40386666, 0x66666663},			/* 1.97586e+10=f(24.4000)*/
-{ 6, 0,123,__LINE__, 0x42392ead, 0x00000000, 0x403a1999, 0x99999996},			/* 1.08157e+11=f(26.1000)*/
-{ 6, 0,123,__LINE__, 0x42613b16, 0xc0000000, 0x403bcccc, 0xccccccc9},			/* 5.92046e+11=f(27.8000)*/
-{ 6, 0,123,__LINE__, 0x42879486, 0x60000000, 0x403d7fff, 0xfffffffc},			/* 3.24083e+12=f(29.5000)*/
-0,};
-test_sinhf(m)   {run_vector_1(m,sinhf_vec,(char *)(sinhf),"sinhf","ff");   }	
diff --git a/newlib/libm/test/sprint_ivec.c b/newlib/libm/test/sprint_ivec.c
deleted file mode 100644
index 24762c6b3..000000000
--- a/newlib/libm/test/sprint_ivec.c
+++ /dev/null
@@ -1,5017 +0,0 @@
-#include "test.h"
-
-sprint_int_type sprint_ints[] = 
-{
-__LINE__, 0x000838d2,	"838d2", "%.4x",
-__LINE__, 0x0063be46,	"63BE46", "%-6X",
-__LINE__, -0x1b236c0,	"-28456640", "%#0.d",
-__LINE__, -0x0000003,	"-3", "% 0d",
-__LINE__, 0x0000ed51,	"ed51", "%2.x",
-__LINE__, -0x00001f2,	"-498", "%1ld",
-__LINE__, 0x0ea3e927,	"EA3E927", "%+X",
-__LINE__, 0xffbef8da,	"FFBEF8DA", "%5X",
-__LINE__, 0x62ff9f56,	"62ff9f56", "%0x",
-__LINE__, 0x00000ad2,	"AD2", "%.0X",
-__LINE__, 0x00000000,	"      ", "% 6.ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%1.4X",
-__LINE__, 0x0000208c,	" 208C", "%5X",
-__LINE__, 0x0000003c,	"3c", "%x",
-__LINE__, 0xffff6177,	"0xffff6177", "%+#x",
-__LINE__, 0xffffdc8d,	"ffffdc8d", "%+x",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, 0x00002434,	"9268", "%0d",
-__LINE__, 0xd2c72cdb,	"d2c72cdb", "%-x",
-__LINE__, 0xfe38012b,	"0xfe38012b", "%+#7x",
-__LINE__, 0x00000001,	"0001", "%#.4d",
-__LINE__, -0x008525a,	"-0545370", "%06.7ld",
-__LINE__, 0xffffffac,	"ffffffac", "%3.7x",
-__LINE__, 0x007424d2,	"+7611602", "%+ld",
-__LINE__, 0x00001a85,	"1A85", "%.4X",
-__LINE__, -0x0000019,	"-25", "%3.d",
-__LINE__, 0xfffffffe,	"fffffffe", "%-x",
-__LINE__, -0x34473b2,	"-54817714", "% d",
-__LINE__, 0x000000ea,	"234", "%1.ld",
-__LINE__, -0x0000004,	"-4     ", "%-7.ld",
-__LINE__, 0x00006c94,	"27796", "%0d",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0x00000619,	"619", "%1x",
-__LINE__, 0x0000209c,	"8348", "%ld",
-__LINE__, -0x327f8ff,	"-52951295", "%-0ld",
-__LINE__, 0xffffff0b,	"FFFFFF0B", "%2.X",
-__LINE__, 0xf199d6ae,	"F199D6AE", "%X",
-__LINE__, 0x3ca5602e,	"1017471022", "%-1.ld",
-__LINE__, -0xfb2080b,	"-263325707", "%3.5d",
-__LINE__, 0x00001cb8,	"7352", "%d",
-__LINE__, 0x00000000,	"0000000", "%3.7d",
-__LINE__, 0xffffff40,	"FFFFFF40", "%+X",
-__LINE__, 0x14664450,	"0x14664450", "%#x",
-__LINE__, 0x0000002e,	"2e", "%1x",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, 0xffff606a,	"0XFFFF606A", "%#X",
-__LINE__, 0xffffff33,	"0XFFFFFF33", "%#X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, -0x0000012,	"-00018", "%-2.5d",
-__LINE__, 0x0001fbe6,	"130022", "%1.d",
-__LINE__, 0xfff59dd9,	"fff59dd9", "%+x",
-__LINE__, 0x00000002,	"2", "%0.0d",
-__LINE__, 0x00000fe1,	"fe1    ", "%-7.x",
-__LINE__, 0x001f8f6a,	"1F8F6A", "%1.X",
-__LINE__, 0x0000001b,	"000001B", "%04.7X",
-__LINE__, 0x126a2609,	" 308946441", "% 4d",
-__LINE__, 0xffffffe3,	"0XFFFFFFE3", "%+#.1X",
-__LINE__, 0x1858f1c9,	"1858f1c9", "%.3x",
-__LINE__, 0x003fc672,	"3fc672", "%1x",
-__LINE__, 0x00c0bddc,	"12631516", "%#d",
-__LINE__, 0x000006d6,	"1750", "%#d",
-__LINE__, 0x000006a0,	"6A0", "%X",
-__LINE__, 0x000007be,	"7BE", "%X",
-__LINE__, -0x1c7cd1a,	"-29871386", "%ld",
-__LINE__, 0x000000cc,	"204", "%ld",
-__LINE__, 0x000002db,	"731  ", "%-#5d",
-__LINE__, 0xffff67ad,	"FFFF67AD", "% X",
-__LINE__, 0x00000008,	"8", "%d",
-__LINE__, 0xffe07007,	"FFE07007", "%5X",
-__LINE__, -0x0000001,	"     -1", "% 7d",
-__LINE__, 0xfffffffe,	"fffffffe", "%x",
-__LINE__, 0x00027b68,	"+162664", "%+ld",
-__LINE__, 0x0a7c1997,	"+175905175", "%+2ld",
-__LINE__, 0xfe300896,	"fe300896", "%.4x",
-__LINE__, 0x00000537,	"537", "%-0.x",
-__LINE__, 0x3e981779,	"3e981779", "%.6x",
-__LINE__, 0xfffff05e,	"FFFFF05E", "%1.0X",
-__LINE__, -0x07bc0cf,	"-8110287", "%-7d",
-__LINE__, -0x01371bc,	"-1274300", "%.7ld",
-__LINE__, -0x0000013,	"-19", "%.2ld",
-__LINE__, 0x000000d1,	"0xd1", "%#x",
-__LINE__, -0x0000003,	"-3", "%-ld",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%4.1X",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, 0x0001c8af,	"116911", "%d",
-__LINE__, 0x000048c3,	"48C3", "%X",
-__LINE__, 0x00000079,	"0x0000079", "%-#0.7x",
-__LINE__, 0x0000615a,	" 24922", "% d",
-__LINE__, 0xfffffff5,	"fffffff5", "%x",
-__LINE__, 0x00000308,	"0000308", "%+07.7x",
-__LINE__, 0xfcadc983,	"fcadc983", "%x",
-__LINE__, 0x00000097,	"151", "%#d",
-__LINE__, 0x000001c5,	"453", "%0.2ld",
-__LINE__, 0x00000000,	"00", "%-1.2x",
-__LINE__, 0x00000001,	"+1", "%+02.d",
-__LINE__, 0x01eb4354,	"1EB4354", "% X",
-__LINE__, 0xffffa7d1,	"ffffa7d1", "%5.x",
-__LINE__, 0x0003170e,	"0x3170e", "%#x",
-__LINE__, 0x000001ce,	"1CE", "% .2X",
-__LINE__, 0x3a2991fb,	"975802875", "%d",
-__LINE__, -0xcdad8e2,	"-215668962", "%-d",
-__LINE__, 0xfe0261c3,	"fe0261c3", "%x",
-__LINE__, -0x0006ea7,	"-28327", "% ld",
-__LINE__, 0x032854a3,	"0X32854A3", "% #6X",
-__LINE__, 0x0000004b,	"4b", "%x",
-__LINE__, 0xffff6ca3,	"FFFF6CA3", "%4.X",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, 0x00611f04,	"611F04", "%.1X",
-__LINE__, 0x00000000,	"     0", "%#6d",
-__LINE__, 0x0002c711,	"2c711", "%-02.x",
-__LINE__, -0x07a2fe4,	"-8007652", "%d",
-__LINE__, -0x0000547,	"-1351", "%ld",
-__LINE__, 0x00013954,	"0x13954", "%#x",
-__LINE__, -0x00523b7,	"-336823", "%ld",
-__LINE__, -0x00f6c6e,	"-1010798", "%6.ld",
-__LINE__, 0xffea6427,	"FFEA6427", "%3X",
-__LINE__, -0x0000005,	"-5", "%d",
-__LINE__, -0x04fe618,	"-5236248", "% .7d",
-__LINE__, 0xffa80a28,	"ffa80a28", "%-0x",
-__LINE__, 0x00000047,	"71", "%ld",
-__LINE__, 0x001dc6bb,	"1951419", "%#4ld",
-__LINE__, 0x00000868,	"  2152", "%#6d",
-__LINE__, 0x000002fb,	"2fb", "%x",
-__LINE__, 0x00607fa0,	"6324128", "%4d",
-__LINE__, 0xfffed161,	"fffed161", "%x",
-__LINE__, 0x0001c6e4,	" 116452", "% 2.5d",
-__LINE__, 0x0003dda8,	"3DDA8", "%4X",
-__LINE__, 0xfffffff8,	"fffffff8", "%x",
-__LINE__, 0xfacf664a,	"facf664a", "%x",
-__LINE__, 0x000000c1,	"C1", "% 1X",
-__LINE__, 0x0000839c,	"  839C", "%6X",
-__LINE__, 0xfffff69a,	"FFFFF69A", "%X",
-__LINE__, 0x000e5c2e,	"+941102", "%+d",
-__LINE__, -0x0000004,	"-4", "%#d",
-__LINE__, 0x00000000,	"00000", "%#.5ld",
-__LINE__, 0xfffffffe,	"fffffffe", "%3.1x",
-__LINE__, 0x0010ed68,	"1109352", "%-ld",
-__LINE__, 0xffffffe9,	"ffffffe9", "%.6x",
-__LINE__, 0x00000007,	"   7", "% 4.ld",
-__LINE__, 0x0000caba,	"51898", "%ld",
-__LINE__, -0x0000119,	"-281", "% d",
-__LINE__, 0x0c3012a9,	"204477097", "%03.6ld",
-__LINE__, -0x001c98f,	"-117135", "%ld",
-__LINE__, 0x000017b1,	"+6065", "%+d",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, -0x0000019,	"-25", "% .2d",
-__LINE__, 0x0009ae28,	"9AE28", "%X",
-__LINE__, 0xe861c4fe,	"e861c4fe", "%7.x",
-__LINE__, 0xffac88d3,	"FFAC88D3", "%X",
-__LINE__, -0x00005df,	"-01503", "%-5.5ld",
-__LINE__, 0x0000013e,	"318", "%-0d",
-__LINE__, 0x04b6f58f,	"4b6f58f", "%x",
-__LINE__, 0xfffe3978,	"fffe3978", "%+0.6x",
-__LINE__, 0x57ee5244,	"57ee5244", "%+7.4x",
-__LINE__, 0xfffb5610,	"fffb5610", "% 6x",
-__LINE__, 0x00000006,	"      6", "%#7d",
-__LINE__, 0x0000000c,	"0x0000c", "%#.5x",
-__LINE__, -0xec59362,	"-247829346", "%1.7d",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, -0x0007e4b,	"-32331", "% d",
-__LINE__, 0x0ececa6f,	"248433263", "%0d",
-__LINE__, 0x00000578,	"   578", "%+6.x",
-__LINE__, -0x0000003,	"-3", "%ld",
-__LINE__, 0x000002bb,	"2bb", "% 0x",
-__LINE__, -0x0000006,	"-6", "%-ld",
-__LINE__, 0x000002f9,	"761", "%d",
-__LINE__, 0xffffd736,	"ffffd736", "%3.4x",
-__LINE__, 0x0010ba79,	"1096313", "%7.4d",
-__LINE__, -0x0001244,	"-4676", "%#.1d",
-__LINE__, 0x00000dbe,	"DBE", "%1X",
-__LINE__, -0x0000015,	"-21", "%-0.d",
-__LINE__, 0xffffffff,	"0xffffffff", "%#x",
-__LINE__, -0x6cdf4a3,	"-114160803", "%ld",
-__LINE__, 0x00008ac9,	"8AC9", "%1X",
-__LINE__, 0x00000000,	"00", "%.2X",
-__LINE__, -0x2263dba,	"-36060602", "%5.5d",
-__LINE__, 0x00007da9,	"32169", "%0d",
-__LINE__, 0xfffffff7,	"FFFFFFF7", "% 4.X",
-__LINE__, 0xfbf36cca,	"FBF36CCA", "%.1X",
-__LINE__, 0x00000040,	"64", "%.0ld",
-__LINE__, 0x0000001c,	" 28", "% d",
-__LINE__, 0xfffffadb,	"0xfffffadb", "%#.5x",
-__LINE__, 0x0eb95847,	"247027783", "%d",
-__LINE__, 0xfffd7030,	"FFFD7030", "%+02X",
-__LINE__, 0x00000005,	"00005", "%.5x",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%X",
-__LINE__, 0x98975b15,	"98975B15", "%02X",
-__LINE__, -0x0000034,	"   -52", "%6ld",
-__LINE__, 0xffd7d0cc,	"ffd7d0cc", "% 5.6x",
-__LINE__, 0xffffffa6,	"FFFFFFA6", "%X",
-__LINE__, 0xfff27132,	"fff27132", "%x",
-__LINE__, -0x065b74d,	"-6666061", "%+6ld",
-__LINE__, 0xf6ac99d6,	"0XF6AC99D6", "%#X",
-__LINE__, 0xfffff4bd,	"FFFFF4BD", "%X",
-__LINE__, 0xfffffb62,	"FFFFFB62", "%6X",
-__LINE__, 0xf8434543,	"f8434543", "%-0x",
-__LINE__, 0x0002b374,	"0x2b374", "%-#6x",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xffb5751d,	"ffb5751d", "%-3.x",
-__LINE__, 0x34ea7347,	"887780167", "%d",
-__LINE__, -0x008f457,	"-586839", "%0ld",
-__LINE__, 0x00000001,	"   1", "%#4d",
-__LINE__, 0xc32d7ad4,	"c32d7ad4", "%0x",
-__LINE__, 0xfffffb80,	"FFFFFB80", "%-.2X",
-__LINE__, 0x00000756,	"756   ", "%-6x",
-__LINE__, 0xfffb020f,	"FFFB020F", "%+.2X",
-__LINE__, -0xe68619f,	"-241721759", "%#1.6ld",
-__LINE__, 0x180166cd,	"402745037", "%3.7ld",
-__LINE__, -0x0000001,	"-1", "%+00d",
-__LINE__, 0xfdbc3611,	"fdbc3611", "%x",
-__LINE__, -0x000005b,	"-91", "%d",
-__LINE__, 0xffffe77f,	"ffffe77f", "%x",
-__LINE__, -0x0000019,	"-25", "%ld",
-__LINE__, 0x00000016,	"22", "%#d",
-__LINE__, -0x0000025,	"-37", "%ld",
-__LINE__, 0xffffe43f,	"ffffe43f", "%x",
-__LINE__, 0x000050a5,	"00050a5", "%.7x",
-__LINE__, 0x0000000c,	"   12", "% 5.ld",
-__LINE__, -0x001faff,	"-129791", "%4d",
-__LINE__, 0x239d7cf2,	"597523698", "%0.7ld",
-__LINE__, 0x04092183,	"4092183", "% 7X",
-__LINE__, -0x0043498,	"-275608", "%-ld",
-__LINE__, -0x0018dbe,	"-101822", "%d",
-__LINE__, 0xff3e09c3,	"FF3E09C3", "%X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, -0x15d57558,	"-366310744", "%+0.7ld",
-__LINE__, 0x0004fb06,	"326406", "%0.0d",
-__LINE__, 0x00000119,	"0X119", "%#X",
-__LINE__, -0x14c53e19,	"-348470809", "%d",
-__LINE__, 0x00000019,	"0000019", "% .7X",
-__LINE__, -0x0000654,	"-1620", "%0.4ld",
-__LINE__, -0xde5899b,	"-233146779", "%#.1d",
-__LINE__, 0x0013c1f0,	"1294832", "%4.ld",
-__LINE__, 0x0a9fe761,	"A9FE761", "%X",
-__LINE__, -0x00000e5,	"-229", "%1ld",
-__LINE__, 0x00000161,	"000353", "%.6ld",
-__LINE__, 0x6b04e4bd,	"0x6b04e4bd", "%#7.0x",
-__LINE__, -0x0000ef0,	"-3824 ", "%-6.ld",
-__LINE__, -0x026306e,	"-2502766", "%ld",
-__LINE__, 0x00000000,	"0", "%-X",
-__LINE__, 0xfffffe1f,	"fffffe1f", "%-x",
-__LINE__, 0x0003aecf,	" 241359", "% 2.1ld",
-__LINE__, -0x0000014,	"-20", "%d",
-__LINE__, 0x00000002,	"0002", "%-.4ld",
-__LINE__, 0xfffff662,	"0XFFFFF662", "% #.6X",
-__LINE__, 0x00000006,	"6", "%0x",
-__LINE__, 0x0001f4c4,	" 128196", "% 0d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%5X",
-__LINE__, 0x05605e38,	"90201656", "%ld",
-__LINE__, 0xffffffde,	"0XFFFFFFDE", "% #X",
-__LINE__, 0x000001e0,	"    1e0", "%7.x",
-__LINE__, 0x00000007,	"7", "%X",
-__LINE__, 0x00000001,	"+1", "%+d",
-__LINE__, 0xffffffe0,	"FFFFFFE0", "% X",
-__LINE__, 0xffd7f77a,	"FFD7F77A", "%+00.1X",
-__LINE__, 0xfffffffe,	"0xfffffffe", "%-#x",
-__LINE__, 0x01b0a63b,	"1b0a63b", "%x",
-__LINE__, -0x06554b7,	"-6640823", "%d",
-__LINE__, 0xfffffff8,	"fffffff8", "%x",
-__LINE__, 0x00000b2d,	"b2d", "%x",
-__LINE__, -0x2664ba2,	"-40258466", "%-d",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, -0x0000552,	" -1362", "%6.2ld",
-__LINE__, 0x00000009,	" 00009", "%6.5x",
-__LINE__, 0x00035c72,	"220274", "%05.ld",
-__LINE__, -0x014d09d,	"-1364125", "%d",
-__LINE__, -0x0000002,	"  -2", "% 4d",
-__LINE__, 0x00000001,	"1", "%+X",
-__LINE__, 0x00000028,	"28", "%X",
-__LINE__, 0xf25c9eb2,	"F25C9EB2", "%7.X",
-__LINE__, -0x7ae4b62,	"-128863074", "%d",
-__LINE__, 0x00630d87,	"630D87", "%2X",
-__LINE__, 0x000000f8,	"F8", "%-X",
-__LINE__, 0xfffffff9,	"FFFFFFF9", "%X",
-__LINE__, -0x0000007,	"-7", "%0d",
-__LINE__, -0x2518fcd,	"-38899661", "% 3ld",
-__LINE__, 0xfffff4b4,	"FFFFF4B4", "%-5X",
-__LINE__, 0x01cc36c8,	"30160584", "%ld",
-__LINE__, 0xffffffff,	"ffffffff", "%-x",
-__LINE__, 0x0000000b,	"    11", "%6.ld",
-__LINE__, 0x00010d55,	" 68949", "% d",
-__LINE__, -0x0c01306,	"-12587782", "% 6.1ld",
-__LINE__, 0x001719d7,	"1513943", "%.1ld",
-__LINE__, -0x0000002,	" -2", "%+3.ld",
-__LINE__, 0x0000018e,	"398", "%d",
-__LINE__, 0x000000a6,	"0xa6", "%-#3x",
-__LINE__, 0x00006f66,	" 28518", "% #d",
-__LINE__, 0x0000032a,	"32A", "%X",
-__LINE__, -0x0000145,	"-325", "%0d",
-__LINE__, 0xffffffff,	"ffffffff", "%2.x",
-__LINE__, 0x00287171,	"2650481", "%ld",
-__LINE__, 0x0000004b,	"+75", "%+02.ld",
-__LINE__, 0xfffffff8,	"fffffff8", "%-0x",
-__LINE__, 0x00000064,	"64", "% X",
-__LINE__, 0xfffffca2,	"fffffca2", "%0x",
-__LINE__, 0x000010b6,	"10b6", "% .0x",
-__LINE__, -0x003806f,	"-229487", "%7d",
-__LINE__, -0x00000b7,	"-183", "%3ld",
-__LINE__, 0xffffe5ba,	"FFFFE5BA", "%0X",
-__LINE__, 0x001f0da8,	"1f0da8", "%+x",
-__LINE__, 0x000ce185,	"844165", "%0ld",
-__LINE__, 0x00000c96,	"3222", "%0d",
-__LINE__, -0x0013099,	"-77977", "%1.ld",
-__LINE__, -0x5f3c47a,	"-99861626", "%.6ld",
-__LINE__, 0x00000cbf,	"  CBF", "%+5.X",
-__LINE__, -0x0000001,	"-1", "%+ld",
-__LINE__, 0x0d793bc3,	"d793bc3", "%6.x",
-__LINE__, 0xfffffffd,	"0xfffffffd", "%+#x",
-__LINE__, -0x0000070,	"  -112", "%6.d",
-__LINE__, 0xfffffb3f,	"FFFFFB3F", "%.7X",
-__LINE__, 0x037dfc78,	"0X37DFC78", "%#X",
-__LINE__, 0x00009ba5,	"39845", "%3ld",
-__LINE__, 0x0000004a,	"4a", "%0x",
-__LINE__, 0xffffff81,	"ffffff81", "%5.5x",
-__LINE__, -0x86ef222,	"-141488674", "%ld",
-__LINE__, -0xac5531e,	"-180704030", "% 4ld",
-__LINE__, 0x00002493,	"2493", "%+X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%1.3X",
-__LINE__, 0x0005c875,	"378997", "%.0ld",
-__LINE__, 0x0301d345,	"50451269", "%d",
-__LINE__, 0xfff6b589,	"fff6b589", "%2.4x",
-__LINE__, -0x00001db,	"-475   ", "%-7.0d",
-__LINE__, 0x0000d1e7,	"0x000d1e7", "%#2.7x",
-__LINE__, 0xf4c4d2bb,	"f4c4d2bb", "%.6x",
-__LINE__, 0x00c89f54,	"13147988", "%ld",
-__LINE__, -0x6599253c,	"-1704535356", "%+ld",
-__LINE__, 0xab7d61ea,	"ab7d61ea", "% x",
-__LINE__, 0x00000006,	"6", "%1ld",
-__LINE__, 0xffff5ab7,	"ffff5ab7", "%0x",
-__LINE__, -0x1cfeca5b,	"-486459995", "%#ld",
-__LINE__, 0x000000f3,	"    f3", "% 6.x",
-__LINE__, -0x0000021,	"-33", "%d",
-__LINE__, 0xfe7246ac,	"fe7246ac", "%-5.x",
-__LINE__, 0x00000017,	"00017", "%-.5X",
-__LINE__, -0x0cc250a,	"-13378826", "%0.0d",
-__LINE__, -0x00010ae,	"-04270", "%#.5ld",
-__LINE__, -0x7952c8b,	"-127216779", "% ld",
-__LINE__, 0x0002a53e,	"173374", "%4.0d",
-__LINE__, 0x03801bbf,	"3801BBF", "%0X",
-__LINE__, 0x0368645f,	"+57173087", "%+#0.6ld",
-__LINE__, 0x0000002f,	"47", "%d",
-__LINE__, 0x00000003,	"3", "%x",
-__LINE__, 0x000005f7,	"5F7", "%0X",
-__LINE__, -0x06e5e76,	"-7233142", "% 0.1ld",
-__LINE__, 0x053da936,	"53da936", "%1.4x",
-__LINE__, -0x0df0c2f,	"-14617647", "%.5ld",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%-0X",
-__LINE__, 0x000104bf,	"104BF", "%X",
-__LINE__, 0x000353fc,	"353FC", "%X",
-__LINE__, 0x182a18dc,	"+405412060", "%+ld",
-__LINE__, 0x0000000e,	" 14", "% 2d",
-__LINE__, -0x0000091,	"-145", "%+ld",
-__LINE__, 0x0029a9d6,	"2730454", "%d",
-__LINE__, 0x00009d57,	"009d57", "% .6x",
-__LINE__, 0x4c4d4f79,	"1280135033", "%5.ld",
-__LINE__, -0x000075b,	"-1883", "% 03d",
-__LINE__, -0x001b718,	"-112408", "%+d",
-__LINE__, 0xfffaaf57,	"FFFAAF57", "%+1X",
-__LINE__, 0x00f44e52,	"F44E52", "% 4X",
-__LINE__, 0x00000002,	"0X2", "%#X",
-__LINE__, 0x000a85e9,	"A85E9", "%+0X",
-__LINE__, 0xffff70bb,	"ffff70bb", "%6x",
-__LINE__, 0x00004e15,	"4e15", "%x",
-__LINE__, 0x000eeb60,	" 977760", "% ld",
-__LINE__, 0xfffffff1,	"fffffff1", "%0x",
-__LINE__, -0x294d7e2,	"-43309026", "% 02.d",
-__LINE__, 0x0001aaeb,	"0109291", "%02.7ld",
-__LINE__, 0x000a01fc,	"0xa01fc", "%-#.5x",
-__LINE__, 0x002c3c30,	"+2898992", "%+#d",
-__LINE__, 0x015667ae,	"+22439854", "%+5ld",
-__LINE__, -0x05af42b,	"-5960747", "%+d",
-__LINE__, 0x0000be36,	"be36", "%+2x",
-__LINE__, 0x005e3f67,	"5e3f67", "% x",
-__LINE__, -0x0000020,	"-32", "% ld",
-__LINE__, -0x0003617,	"-13847", "% d",
-__LINE__, 0x00000014,	"14  ", "%-4.X",
-__LINE__, 0x00000001,	"001", "%0.3d",
-__LINE__, 0xfffffea9,	"fffffea9", "%3.x",
-__LINE__, 0xe447099e,	"E447099E", "%0X",
-__LINE__, 0x00049c71,	"302193", "%d",
-__LINE__, 0x76356ed3,	"0x76356ed3", "%#4.1x",
-__LINE__, 0x00000005,	"  0X5", "%#5X",
-__LINE__, 0x00004da2,	"0x004da2", "%#1.6x",
-__LINE__, 0xffdfb36c,	"FFDFB36C", "%4X",
-__LINE__, 0xffffe3c5,	"FFFFE3C5", "%+4.X",
-__LINE__, 0x00000006,	"6", "%0x",
-__LINE__, -0x914ff17,	"-152370967", "% .5ld",
-__LINE__, -0x0000002,	"-2", "%0ld",
-__LINE__, 0xffffff36,	"FFFFFF36", "% 2X",
-__LINE__, -0x0bb1598,	"-12260760", "%-ld",
-__LINE__, 0x00006db5,	"28085", "%0.5ld",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, -0x0000001,	"-1", "%0ld",
-__LINE__, 0x0fa37e79,	"FA37E79", "%1.X",
-__LINE__, -0x00000ac,	"-172", "%.2d",
-__LINE__, 0xffffffd8,	"ffffffd8", "%.7x",
-__LINE__, -0x000a513,	"-42259", "%ld",
-__LINE__, 0x00001294,	"4756", "%2ld",
-__LINE__, -0x56bae0b4,	"-1455087796", "%.1ld",
-__LINE__, 0x3b26d5fa,	"3b26d5fa", "%x",
-__LINE__, 0xff657013,	"ff657013", "%x",
-__LINE__, -0x00005f5,	"-1525", "%0.0ld",
-__LINE__, -0x0000001,	"     -1", "% 7d",
-__LINE__, -0x02396b2,	"-2332338", "%d",
-__LINE__, -0x0000003,	"-000003", "%+7.6d",
-__LINE__, 0xfd3ec7c1,	"fd3ec7c1", "% 3.4x",
-__LINE__, -0x076e338,	"-7791416", "%0.d",
-__LINE__, -0x000015e,	"-350", "%3ld",
-__LINE__, 0x0a0f0b71,	"a0f0b71", "%x",
-__LINE__, 0xfffe00ba,	"FFFE00BA", "%X",
-__LINE__, 0x00036bd8,	" 36bd8", "% 06.x",
-__LINE__, 0xfffff2df,	"0XFFFFF2DF", "%#2.6X",
-__LINE__, 0x004687fb,	"4622331", "%ld",
-__LINE__, -0x0000331,	"  -817", "%+6.d",
-__LINE__, 0xfcd5b090,	"fcd5b090", "%+0x",
-__LINE__, 0x0334f94c,	"334F94C", "%.6X",
-__LINE__, 0x00000bce,	"3022", "%.3ld",
-__LINE__, 0xf28d9ddd,	"f28d9ddd", "%x",
-__LINE__, 0x00003a79,	" 14969", "% ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%.7X",
-__LINE__, 0x0043d7fe,	"43D7FE", "%X",
-__LINE__, -0x0000b82,	"-2946", "%-ld",
-__LINE__, -0x00e29d8,	"-928216", "%d",
-__LINE__, 0xffffffec,	"ffffffec", "%-x",
-__LINE__, 0x0aeaf557,	"0xaeaf557", "%-#x",
-__LINE__, 0x00c07fe6,	"C07FE6", "%X",
-__LINE__, 0x307414d8,	"307414d8", "% 0x",
-__LINE__, -0x045ef67,	"-4583271", "%d",
-__LINE__, 0x0000024a,	" 0000586", "% .7d",
-__LINE__, 0xfffffc42,	"fffffc42", "%x",
-__LINE__, 0xfc38c249,	"fc38c249", "%5.x",
-__LINE__, -0x000d096,	"-53398", "%-d",
-__LINE__, -0x213a345,	"-34841413", "%ld",
-__LINE__, -0x0000130,	"-304", "%ld",
-__LINE__, -0x000efd1,	"-61393", "%ld",
-__LINE__, 0xfffff867,	"FFFFF867", "%2X",
-__LINE__, 0x00113ed0,	"0x113ed0", "%-#7x",
-__LINE__, 0x00000677,	" 1655", "% 3.ld",
-__LINE__, 0x0000002f,	"2f", "%x",
-__LINE__, 0xfffffd38,	"fffffd38", "%-4x",
-__LINE__, -0x000b3cc,	"-46028", "%1.2d",
-__LINE__, 0x45da719b,	"45DA719B", "%+0X",
-__LINE__, -0x000a454,	" -42068", "%7.3ld",
-__LINE__, 0x01cc7c30,	" 30178352", "% d",
-__LINE__, -0x05ae80e,	"-5957646", "%#.4ld",
-__LINE__, 0x000000b9,	"185", "%d",
-__LINE__, 0x003fcaf4,	"4180724", "%1.ld",
-__LINE__, 0x02da1b74,	"2DA1B74", "%X",
-__LINE__, 0xffffffd9,	"FFFFFFD9", "%X",
-__LINE__, 0x00064359,	"64359 ", "%-6X",
-__LINE__, 0x000000f0,	"240", "%ld",
-__LINE__, -0x01715e5,	"-1512933", "%ld",
-__LINE__, 0xc8f6e118,	"0XC8F6E118", "%#X",
-__LINE__, 0xfffffd8f,	"FFFFFD8F", "%X",
-__LINE__, 0x0000176d,	"5997  ", "%-6d",
-__LINE__, 0x00003cab,	"0x3cab", "%#0.3x",
-__LINE__, 0x00000001,	" 1", "% d",
-__LINE__, 0xfffff610,	"0XFFFFF610", "%#X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%5.7X",
-__LINE__, 0x00000001,	"1", "%0x",
-__LINE__, 0x00000001,	"00001", "%.5ld",
-__LINE__, -0x0000d51,	"-3409", "%d",
-__LINE__, -0x08639ee,	"-8796654", "%ld",
-__LINE__, 0x00003121,	"12577", "%#1.2ld",
-__LINE__, 0x0000004e,	"78", "%d",
-__LINE__, 0xfffff64f,	"fffff64f", "%-x",
-__LINE__, 0x0000002a,	"2a", "%0x",
-__LINE__, 0x00000020,	"20", "%x",
-__LINE__, -0x00000b8,	"-184", "%#ld",
-__LINE__, 0x0000000a,	"10", "%-#d",
-__LINE__, 0x00000364,	"868", "%.1ld",
-__LINE__, 0x00d1f9b6,	"D1F9B6", "%0.X",
-__LINE__, 0x008cfda1,	"8CFDA1", "% 6.X",
-__LINE__, 0xffd58cce,	"FFD58CCE", "%X",
-__LINE__, 0x00000008,	"0000008", "%6.7ld",
-__LINE__, 0x00000318,	" 318", "%4X",
-__LINE__, 0x000172d8,	"94936", "%2ld",
-__LINE__, -0x056ccbf,	"-5688511", "%ld",
-__LINE__, 0x000000c7,	"+000199", "%+0.6d",
-__LINE__, 0x00000002,	"0X2", "%-#X",
-__LINE__, 0xfffff634,	"FFFFF634", "%.1X",
-__LINE__, -0x00001f3,	"-499", "%-ld",
-__LINE__, -0x000081b,	"-2075", "%-d",
-__LINE__, 0x000000b5,	"181", "%0d",
-__LINE__, 0xfe961ee8,	"fe961ee8", "%0x",
-__LINE__, 0x000028a2,	"10402", "%d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%.4X",
-__LINE__, -0x000058a,	"-1418", "%.3ld",
-__LINE__, 0x00001ceb,	"1CEB", "%X",
-__LINE__, 0x00000021,	"21", "% X",
-__LINE__, 0x00000002,	"2", "%0d",
-__LINE__, -0x2f9bbf5,	"-49921013", "%.4ld",
-__LINE__, 0x00000e91,	"03729", "%#.5ld",
-__LINE__, 0xf1116740,	"f1116740", "%2x",
-__LINE__, 0x00014f72,	"14F72", "%X",
-__LINE__, 0xfffffced,	"FFFFFCED", "%X",
-__LINE__, 0xffffffff,	"ffffffff", "%.5x",
-__LINE__, 0x0017cf0c,	" 1560332", "% 0ld",
-__LINE__, 0x0000000a,	"A", "% X",
-__LINE__, 0xff3a39d4,	"ff3a39d4", "%x",
-__LINE__, 0xfffef05f,	"FFFEF05F", "%X",
-__LINE__, 0xfedfe708,	"fedfe708", "%03.0x",
-__LINE__, 0x000345a0,	"345A0", "% X",
-__LINE__, -0x1ed5b6f7,	"-517322487", "%d",
-__LINE__, 0xd2d56c22,	"D2D56C22", "%0.X",
-__LINE__, 0x00002cbf,	"2CBF", "%.2X",
-__LINE__, 0x00000db4,	"db4", "%3x",
-__LINE__, -0x000b154,	"-45396", "%d",
-__LINE__, 0x002bf4c7,	"2BF4C7", "%X",
-__LINE__, 0x6954abf4,	"+1767156724", "%+d",
-__LINE__, 0xfffffffb,	"fffffffb", "%x",
-__LINE__, -0x29e0050e,	"-702547214", "%-0ld",
-__LINE__, -0x0014989,	"-84361", "%-#0.3ld",
-__LINE__, 0x001a557c,	"+1725820", "%+6.5d",
-__LINE__, -0x56689a81,	"-1449695873", "%.2d",
-__LINE__, 0x00000016,	"   16", "%05.X",
-__LINE__, 0x0001da1e,	" 121374", "% d",
-__LINE__, -0x04deac7,	"-5106375", "%03.4d",
-__LINE__, 0x000012b1,	"4785", "%d",
-__LINE__, 0x0009a116,	"9a116", "%-x",
-__LINE__, -0x0000003,	"-000003", "%4.6ld",
-__LINE__, 0x00000000,	"", "%.0x",
-__LINE__, 0x0000000a,	"  A", "% 3X",
-__LINE__, 0xfffffff0,	"0xfffffff0", "%-#0.1x",
-__LINE__, 0x00000086,	"86", "%0X",
-__LINE__, 0x0000001f,	"31", "%-d",
-__LINE__, 0x0386f706,	"59176710", "%3.6ld",
-__LINE__, 0xffe437ae,	"0XFFE437AE", "%#X",
-__LINE__, 0x0e5405c6,	"e5405c6", "%-x",
-__LINE__, 0xfffdee46,	"FFFDEE46", "%+X",
-__LINE__, 0xff861e9d,	"FF861E9D", "%5.X",
-__LINE__, 0xfffff570,	"FFFFF570", "%-X",
-__LINE__, 0x045c90bd,	"45c90bd", "%0x",
-__LINE__, 0x000000aa,	"AA", "%+X",
-__LINE__, -0x747262e,	"-122103342", "%0ld",
-__LINE__, 0xffffad89,	"FFFFAD89", "%X",
-__LINE__, 0x00000018,	"18", "%0.2X",
-__LINE__, 0x00057a2d,	" 358957", "% #7.d",
-__LINE__, 0x73a0e21d,	"1939923485", "%ld",
-__LINE__, -0x00021e1,	"-8673", "%0d",
-__LINE__, 0x000000e9,	"   233", "% 06.3ld",
-__LINE__, 0xffffcc0d,	"ffffcc0d", "%x",
-__LINE__, 0x00000052,	"52", "%x",
-__LINE__, 0x01c155af,	"1C155AF", "%.5X",
-__LINE__, 0xffffffff,	"ffffffff", "%0.x",
-__LINE__, -0x00400a4,	"-262308", "%-d",
-__LINE__, -0x0000001,	"-0000001", "%#.7ld",
-__LINE__, 0x01fb9c99,	"1fb9c99", "% 03.5x",
-__LINE__, 0xffffffff,	"ffffffff", "%6.x",
-__LINE__, 0xff5e5eea,	"FF5E5EEA", "%X",
-__LINE__, 0x0000000f,	"F", "%+0X",
-__LINE__, 0xfffffe3a,	"fffffe3a", "% x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%-X",
-__LINE__, -0x0000007,	"-7", "%0ld",
-__LINE__, -0x002f635,	"-194101", "%d",
-__LINE__, -0x0000005,	"-5", "%ld",
-__LINE__, -0x0000059,	"-89", "%0ld",
-__LINE__, -0x1ccda96,	"-30202518", "%d",
-__LINE__, -0x0000002,	"-2", "%-d",
-__LINE__, 0xffffffda,	"0XFFFFFFDA", "%#X",
-__LINE__, 0x00036cc5,	"224453", "%#d",
-__LINE__, 0x00000010,	"+16", "%+ld",
-__LINE__, 0x0b6039c7,	"190855623", "%d",
-__LINE__, -0x0000002,	"-002", "%#.3d",
-__LINE__, 0xfff3e746,	"FFF3E746", "%-4X",
-__LINE__, 0x0361b3de,	"361B3DE", "% 04X",
-__LINE__, 0xffffe6a2,	"ffffe6a2", "%-x",
-__LINE__, 0x00032790,	"0x0032790", "%#7.7x",
-__LINE__, 0xffe33b4e,	"ffe33b4e", "%-0x",
-__LINE__, -0x0094663,	"-607843", "%.3ld",
-__LINE__, -0x00a3efa,	"-671482", "%4d",
-__LINE__, 0x000000e6,	"   00E6", "%7.4X",
-__LINE__, 0x000125cb,	"125CB", "%+X",
-__LINE__, 0x0000b97e,	"b97e", "%x",
-__LINE__, -0x0000039,	"-57", "%+ld",
-__LINE__, 0xffffe39a,	"ffffe39a", "%5.4x",
-__LINE__, 0xffffffff,	"ffffffff", "%6.1x",
-__LINE__, -0xdee910c,	"-233738508", "%-#2d",
-__LINE__, -0x14044930,	"-335825200", "%6.ld",
-__LINE__, 0x00a81259,	"a81259", "%x",
-__LINE__, 0x020e74c6,	"20E74C6", "%X",
-__LINE__, -0x00000fb,	"-251", "%01.d",
-__LINE__, 0x034ceb45,	"34CEB45", "%5.X",
-__LINE__, 0xfeacb66a,	"feacb66a", "% x",
-__LINE__, 0x00003eb6,	"3EB6", "% X",
-__LINE__, 0x000009ef,	"9ef", "% x",
-__LINE__, 0xf9d9dd07,	"F9D9DD07", "%0X",
-#ifndef __PCCNECV70__
-
-__LINE__, 0x000154d7,	"087255", "%.6ld",
-__LINE__, -0x000036e,	"-878", "%-ld",
-__LINE__, -0x0007dcc,	"-32204", "% d",
-__LINE__, 0x000019dc,	"6620", "%d",
-__LINE__, 0xffffff6e,	"FFFFFF6E", "%2X",
-__LINE__, 0x00000016,	"0x16", "%-#x",
-__LINE__, 0xffdb3e96,	"ffdb3e96", "%+.5x",
-__LINE__, 0xffffffef,	"FFFFFFEF", "% 04.X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%5X",
-__LINE__, 0x000c08cd,	"C08CD", "%-X",
-__LINE__, 0x18de71ee,	"18de71ee", "%x",
-__LINE__, 0xffffffff,	"ffffffff", "% x",
-__LINE__, -0x00025bd,	"-009661", "%#.6d",
-__LINE__, 0x2f05de14,	" 788913684", "% 6.4ld",
-__LINE__, 0x0c99cf86,	"211406726", "%.5d",
-__LINE__, 0x09e6a21d,	" 166109725", "% 0d",
-__LINE__, -0x013da65,	"-1301093", "%+ld",
-__LINE__, 0x000003d0,	" 976", "% 4.2d",
-__LINE__, -0xef9e3cc,	"-251257804", "%-7.0d",
-__LINE__, 0x0000000c,	"+12", "%+00ld",
-__LINE__, 0xffffffe2,	"ffffffe2", "%x",
-__LINE__, 0x000000fe,	"fe", "%-x",
-__LINE__, 0xfffffc5f,	"fffffc5f", "%x",
-__LINE__, -0x0005c55,	"-23637", "%d",
-__LINE__, -0x0111ff2,	"-1122290", "% 7.d",
-__LINE__, -0x1a1746e5,	"-437733093", "%.4ld",
-__LINE__, 0x00001007,	"004103", "%00.6d",
-__LINE__, 0xffffffe1,	"ffffffe1", "%x",
-__LINE__, 0x0000d80f,	"55311", "%d",
-__LINE__, 0x00000004,	"4", "%+X",
-__LINE__, 0xfffffffd,	"fffffffd", "%6x",
-__LINE__, -0x2afbcc3c,	"-721144892", "%4.6ld",
-__LINE__, 0x00377f96,	"377F96", "%6.X",
-__LINE__, 0xffffffc8,	"FFFFFFC8", "%0X",
-__LINE__, 0x007ed9d1,	"8313297", "%-3d",
-__LINE__, 0x00000000,	"0", "%-X",
-__LINE__, 0x001e122d,	"1970733", "%01.d",
-__LINE__, -0x000029b,	"-667", "%ld",
-__LINE__, -0x002f563,	"-193891", "% 2.5d",
-__LINE__, 0xfffffffe,	"fffffffe", "%+3.7x",
-__LINE__, 0xfff7658c,	"fff7658c", "%x",
-__LINE__, -0x0006d08,	"-0027912", "%7.7ld",
-__LINE__, 0x00000080,	"80", "%X",
-__LINE__, 0x0000078f,	"  1935", "% 6ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "% X",
-__LINE__, 0x000000ae,	"     AE", "%7.X",
-__LINE__, -0x000d6aa,	"-54954", "%-ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%6.X",
-__LINE__, 0x000003bf,	"+959", "%+d",
-__LINE__, -0x7242d04b,	"-1916981323", "% ld",
-__LINE__, 0xf0e6546f,	"F0E6546F", "% .7X",
-__LINE__, 0x047e196a,	"75372906", "%ld",
-__LINE__, 0x0240174e,	"240174E", "%+0X",
-__LINE__, -0x0000006,	"-006", "%.3ld",
-__LINE__, 0x00068aac,	"428716", "%#ld",
-__LINE__, 0xffffffa1,	"ffffffa1", "%0x",
-__LINE__, 0x000adab3,	"adab3", "%x",
-__LINE__, -0x00000ae,	"-0000174", "%7.7ld",
-__LINE__, 0x0f0a8f4b,	"f0a8f4b", "% x",
-__LINE__, 0xfee229bc,	"fee229bc", "%x",
-__LINE__, -0x275b8455,	"-660309077", "%.2ld",
-__LINE__, -0xca4b2a5,	"-212120229", "%d",
-__LINE__, 0x000000b5,	" 181", "%04.d",
-__LINE__, 0xfff213f2,	"FFF213F2", "%X",
-__LINE__, 0x00000003,	"3", "%-X",
-__LINE__, 0x0ebb978b,	"247175051", "%.6ld",
-__LINE__, 0xffffffca,	"FFFFFFCA", "%X",
-__LINE__, -0x0000003,	"-03", "%+0.2d",
-__LINE__, -0x178ff86,	"-24706950", "%+d",
-__LINE__, 0x0000003c,	"     60", "%7.ld",
-__LINE__, -0x001012d,	"-65837", "%.5d",
-__LINE__, 0x03673fd2,	"3673fd2", "%.5x",
-__LINE__, -0x001fe74,	"-130676", "%#0.6ld",
-__LINE__, 0x004f6226,	"4f6226", "%-0x",
-__LINE__, 0xfffffa0f,	"fffffa0f", "%7x",
-__LINE__, 0xfffffff8,	"fffffff8", "%-.6x",
-__LINE__, -0x0000001,	"-1", "%#d",
-__LINE__, 0xffffe43d,	"ffffe43d", "%7x",
-__LINE__, 0x00009d47,	"0040263", "%7.7ld",
-__LINE__, 0xff0fc79f,	"FF0FC79F", "%-4.X",
-__LINE__, 0x2d610907,	"2d610907", "%x",
-__LINE__, -0x00002de,	"-734", "%04d",
-__LINE__, 0x0000036b,	"    36B", "%7.1X",
-__LINE__, 0x00000002,	"2", "%.0x",
-__LINE__, -0x1f577b3e,	"-525826878", "%d",
-__LINE__, 0x0000002d,	"45", "%#ld",
-__LINE__, 0xfffffffb,	"fffffffb", "%x",
-__LINE__, -0x0000004,	"-4", "%-.0d",
-__LINE__, 0x00016ba4,	"16ba4", "%x",
-__LINE__, -0x1ad853d5,	"-450384853", "% 0ld",
-__LINE__, 0x00366899,	"366899", "%2.x",
-__LINE__, 0x1659158b,	"1659158B", "%X",
-__LINE__, 0x000076c7,	"76c7", "%x",
-__LINE__, 0x00000674,	"674", "%0x",
-__LINE__, 0x016c9d8a,	"+23895434", "%+ld",
-__LINE__, 0xfffffc43,	"FFFFFC43", "%0X",
-__LINE__, 0xfff249d2,	"fff249d2", "%-2.x",
-__LINE__, 0xffffffdd,	"ffffffdd", "%5x",
-__LINE__, 0xffffa7ef,	"FFFFA7EF", "%0.3X",
-__LINE__, 0x030d4d06,	"30d4d06", "%x",
-__LINE__, -0x0e4694b,	"-14969163", "%d",
-__LINE__, 0x00000078,	"120", "%.3ld",
-__LINE__, -0x16c1273e,	"-381757246", "%0d",
-__LINE__, 0xffffd183,	"FFFFD183", "% 0X",
-__LINE__, -0x2dfdadd,	"-48224989", "%ld",
-__LINE__, -0x5767fe5c,	"-1466433116", "%ld",
-__LINE__, 0x01bea036,	"29270070", "%#4.3d",
-__LINE__, 0x00000027,	"27", "%-x",
-__LINE__, 0x0004d183,	"4D183", "%X",
-__LINE__, 0xffdaf9c8,	"FFDAF9C8", "%.7X",
-__LINE__, 0xfffffd95,	"fffffd95", "%x",
-__LINE__, -0x0059acb,	"-367307", "%00.d",
-__LINE__, 0x017d8db4,	"17d8db4", "% 05.x",
-__LINE__, 0x0001f084,	"001F084", "%5.7X",
-__LINE__, 0x00000006,	" 6", "% ld",
-__LINE__, 0x011b0802,	"18548738", "%.3ld",
-__LINE__, 0x00000006,	"  6", "%#3.d",
-__LINE__, 0xffffffff,	"ffffffff", "%6x",
-__LINE__, 0x00000001,	"1", "% x",
-__LINE__, 0x00000750,	" 01872", "% .5d",
-__LINE__, 0xfffffff9,	"fffffff9", "%x",
-__LINE__, -0x00f842c,	"-1016876", "%+d",
-__LINE__, -0x001dcf0,	"-122096", "%-0d",
-__LINE__, 0x000000c9,	"0XC9", "% #3X",
-__LINE__, 0x1e368e86,	"1e368e86", "%7x",
-__LINE__, -0x0001157,	"-4439", "% 03.4d",
-__LINE__, 0xfff91e87,	"FFF91E87", "%3.5X",
-__LINE__, 0x00000006,	"6", "%x",
-__LINE__, 0x00000bca,	"3018", "%ld",
-__LINE__, 0x00495ff6,	"495ff6", "%01.0x",
-__LINE__, -0x0267f7a,	"-2523002", "% #5d",
-__LINE__, 0x00000060,	"96", "%-d",
-__LINE__, 0x000850c6,	"544966", "%#.1d",
-__LINE__, 0x00231457,	"231457", "%-6.4X",
-__LINE__, 0x0000000b,	"11", "%-d",
-__LINE__, 0x000003bd,	"957", "%#d",
-__LINE__, 0xfd51d970,	"FD51D970", "%+.7X",
-__LINE__, 0x000007bf,	"1983", "%-ld",
-__LINE__, 0x000034b2,	"34B2", "%0.X",
-__LINE__, 0x0000c18d,	"C18D", "%0.X",
-__LINE__, 0xffffbb83,	"ffffbb83", "% 3x",
-__LINE__, 0x000001d0,	"0x1d0", "%#x",
-__LINE__, -0x003c784,	"-247684", "%#ld",
-__LINE__, 0x0210cffa,	"210CFFA", "%X",
-__LINE__, -0x33093a1,	"-53515169", "% 0d",
-__LINE__, 0x00000001,	" 1", "% #ld",
-__LINE__, 0xffffaa53,	"ffffaa53", "%-4.5x",
-__LINE__, 0x2935c056,	"691388502", "%1.d",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x000013d1,	"0X013D1", "%+#2.5X",
-__LINE__, -0x000035c,	"-860", "%-.2d",
-__LINE__, 0x00000000,	"    ", "%-4.X",
-__LINE__, -0x0000147,	"-327", "%d",
-__LINE__, 0x0a317eb0,	"171015856", "%.7d",
-__LINE__, 0x00000003,	"3", "%ld",
-__LINE__, 0x000001d6,	"1d6", "%-x",
-__LINE__, 0x18185214,	"404247060", "%-.2ld",
-__LINE__, 0x00574140,	"0574140", "%.7X",
-__LINE__, 0x00002ea5,	"02ea5", "%.5x",
-__LINE__, 0x00000005,	"5", "% x",
-__LINE__, 0xffc47ed6,	"ffc47ed6", "%-x",
-__LINE__, 0x0001f5da,	"0X1F5DA", "%#X",
-__LINE__, 0xfffffcc9,	"fffffcc9", "% x",
-__LINE__, 0x02586c98,	"2586C98", "%X",
-__LINE__, -0x0000036,	"-54", "% ld",
-__LINE__, 0x00064b57,	"412503", "%1.5d",
-__LINE__, -0x0000007,	"-7", "%#0.0ld",
-__LINE__, 0x00023a03,	"145923", "%ld",
-__LINE__, -0x0000065,	"-101", "%+#d",
-__LINE__, 0x00000208,	"208", "%X",
-__LINE__, 0x00e97728,	"15300392", "%-ld",
-__LINE__, 0x0000030a,	"+778", "%+d",
-__LINE__, 0xf4d7deee,	"F4D7DEEE", "%+X",
-__LINE__, -0x000009a,	"-154", "%+.3ld",
-__LINE__, 0x000002c0,	"+704", "%+ld",
-__LINE__, 0x0067ec23,	"67ec23", "%x",
-__LINE__, 0x005ca7fc,	"+6072316", "%+d",
-__LINE__, 0xfffff5f1,	"fffff5f1", "%x",
-__LINE__, 0x00000601,	"  0X601", "%#7.2X",
-__LINE__, -0x0000057,	"-87", "% ld",
-__LINE__, -0x0000078,	"   -120", "%7.d",
-__LINE__, -0x000001f,	"-31   ", "%-6d",
-__LINE__, 0x0160c000,	"23117824", "%ld",
-__LINE__, -0x0000007,	"-7", "%0ld",
-__LINE__, 0xfffffffe,	"fffffffe", "%+x",
-__LINE__, 0x5b6ef898,	"5b6ef898", "%+0x",
-__LINE__, 0x0009bfb6,	"638902", "%d",
-__LINE__, -0x0000145,	"  -325", "%#6.0d",
-__LINE__, -0x508c048,	"-84459592", "%-5.ld",
-__LINE__, 0x00000002,	" 0x2", "% #4x",
-__LINE__, 0x0001486e,	"84078", "%#d",
-__LINE__, 0x006ac76a,	"6997866", "%.6d",
-__LINE__, 0xffffff98,	"FFFFFF98", "%X",
-__LINE__, 0xfffffe08,	"fffffe08", "%6.x",
-__LINE__, -0x24ef47e,	"-38728830", "%1.6ld",
-__LINE__, 0x39d1b2db,	"39D1B2DB", "% X",
-__LINE__, 0xfffc9ce2,	"0xfffc9ce2", "%#x",
-__LINE__, 0x59485e14,	"1497914900", "%#4ld",
-__LINE__, 0x000022eb,	"22EB", "%3.X",
-__LINE__, 0xfa410352,	"FA410352", "%-X",
-__LINE__, -0x4a342f0,	"-77808368", "% ld",
-__LINE__, 0xef5825a4,	"EF5825A4", "%.6X",
-__LINE__, 0x01b0185a,	"0x1b0185a", "% #x",
-__LINE__, -0x0004290,	"-17040", "%.3d",
-__LINE__, -0x10f88659,	"-284722777", "%+6.2ld",
-__LINE__, 0x00003216,	"12822", "%-d",
-__LINE__, 0x4a31a219,	"1244766745", "%d",
-__LINE__, 0xffffffb5,	"FFFFFFB5", "%-X",
-__LINE__, 0x0000d586,	"D586", "%-2.X",
-__LINE__, 0x00008496,	"33942", "%1.d",
-__LINE__, -0x0000011,	"-17", "%1ld",
-__LINE__, 0x0000003c,	"3C", "%2.X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%.3X",
-__LINE__, 0x0000152a,	"152A", "%X",
-__LINE__, 0xfffe876e,	"FFFE876E", "%X",
-__LINE__, -0x0003874,	"-14452", "%-ld",
-__LINE__, -0x004918a,	"-299402", "%#.6d",
-__LINE__, -0x000000c,	"-12", "%-d",
-__LINE__, 0xffffd812,	"FFFFD812", "%+X",
-__LINE__, -0x000000c,	"-12", "%0d",
-__LINE__, -0x0000229,	"-553", "%0d",
-__LINE__, 0x00002ab8,	"2AB8", "%4.X",
-__LINE__, 0x0000004b,	"+75", "%+ld",
-__LINE__, 0x001c3178,	" 1847672", "% ld",
-__LINE__, -0x0000006,	"-6", "%.0ld",
-__LINE__, 0x0003be65,	"245349", "%ld",
-__LINE__, -0x0000001,	"-1", "%#1ld",
-__LINE__, 0x0000007f,	"+127", "%+ld",
-__LINE__, 0x0000020e,	"526  ", "%-5ld",
-__LINE__, 0x00000002,	"2", "%d",
-__LINE__, 0x03bd0873,	"0X3BD0873", "%#X",
-__LINE__, 0x00093a52,	"604754", "%-2d",
-__LINE__, -0x00823fc,	"-0533500", "%+.7ld",
-__LINE__, 0x00000000,	"    ", "%4.X",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0xfff09ede,	"fff09ede", "%-x",
-__LINE__, 0x01e28c24,	"31624228", "%ld",
-__LINE__, 0x00001dcc,	"1DCC", "%X",
-__LINE__, -0x0f0ea0d,	"-15788557", "%-00.ld",
-__LINE__, 0xffff73a1,	"FFFF73A1", "%X",
-__LINE__, -0x0004040,	"-16448", "%+#d",
-__LINE__, 0x0073b158,	"0x73b158", "%#7x",
-__LINE__, 0xfffff8ff,	"FFFFF8FF", "% 5X",
-__LINE__, -0x0000004,	"-4", "%0d",
-__LINE__, 0xffff56a3,	"ffff56a3", "%1.6x",
-__LINE__, -0x0000041,	"-65", "%0d",
-__LINE__, 0x00000009,	"+0000009", "%+2.7d",
-__LINE__, 0xffffe13d,	"0XFFFFE13D", "%+#2.X",
-__LINE__, -0x00002ce,	"-00718", "%.5ld",
-__LINE__, 0xffc53e28,	"ffc53e28", "%03.4x",
-__LINE__, 0x00000005,	"0X5", "%#X",
-__LINE__, 0x00000004,	"4", "%x",
-__LINE__, 0xe21b35eb,	"e21b35eb", "%-x",
-__LINE__, -0x0000098,	"-152", "%-ld",
-__LINE__, 0xffffff81,	"FFFFFF81", "%2X",
-__LINE__, 0x00000003,	"00003", "%.5ld",
-__LINE__, 0xfffffffc,	"fffffffc", "%+x",
-__LINE__, 0x000491f5,	"299509", "%1.ld",
-__LINE__, 0xf06bfd7d,	"F06BFD7D", "%X",
-__LINE__, -0x0000006,	"-6", "%0d",
-__LINE__, -0x0a4af7d,	"-10792829", "%-0d",
-__LINE__, -0x11a74ef,	"-18511087", "%ld",
-__LINE__, 0x2dc95e17,	"768171543", "%-1.d",
-__LINE__, -0x0000001,	"-1", "%#ld",
-__LINE__, 0x00000033,	"51", "%-#d",
-__LINE__, 0x002d0219,	"2949657", "%ld",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%2.4X",
-__LINE__, 0x00000f20,	"+3872", "%+ld",
-__LINE__, -0x0000047,	"-071", "%4.3ld",
-__LINE__, 0x00000010,	"    16", "%6d",
-__LINE__, 0x00000000,	"0", "%0d",
-__LINE__, 0xffffff57,	"FFFFFF57", "%X",
-__LINE__, -0x0000700,	"-1792", "%-#d",
-__LINE__, -0x0000064,	"-100", "%-ld",
-__LINE__, 0xff26d49a,	"FF26D49A", "%-0X",
-__LINE__, -0x0000006,	"-6", "%.1ld",
-__LINE__, 0x1391edc5,	"1391edc5", "%.1x",
-__LINE__, 0x0000014a,	"330", "%-#ld",
-__LINE__, 0x07ecd1e1,	"7ecd1e1", "%6x",
-__LINE__, -0xa2b8898,	"-170625176", "%3.d",
-__LINE__, 0x00035287,	"0x35287", "%#.0x",
-__LINE__, 0x00000000,	"00000", "%0.5X",
-__LINE__, -0x0000153,	"-339", "%d",
-__LINE__, 0x0000ad6e,	" 44398", "% 0.d",
-__LINE__, 0x00000001,	"1", "%-X",
-__LINE__, -0x000000d,	"-13   ", "%-6.2d",
-__LINE__, -0x01bff8a,	"-1834890", "%d",
-__LINE__, 0x000a0fa8,	"+659368", "%+ld",
-__LINE__, 0xac044dc0,	"ac044dc0", "%.0x",
-__LINE__, 0x0003a729,	"239401", "%ld",
-__LINE__, -0x00004f0,	"-1264", "%+ld",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0x00000012,	"12", "% x",
-__LINE__, 0xffff770b,	"ffff770b", "%7.1x",
-__LINE__, 0xd7458572,	"d7458572", "%x",
-__LINE__, 0x01f1b4f9,	"1f1b4f9", "% 0x",
-__LINE__, 0xfffb2198,	"0XFFFB2198", "% #1.X",
-__LINE__, 0x00ef6189,	" 15688073", "% ld",
-__LINE__, -0x3f0ae63,	"-66104931", "% #d",
-__LINE__, -0x0006075,	"-24693", "%ld",
-__LINE__, 0x000000a1,	"161", "%d",
-__LINE__, 0xfffffffc,	"fffffffc", "%3.2x",
-__LINE__, 0xff6b4125,	"FF6B4125", "%+5.X",
-__LINE__, 0x00000001,	"     1", "%6.d",
-__LINE__, -0x0000001,	"-1", "%+0d",
-__LINE__, -0x000096c,	"-2412", "%0.4d",
-__LINE__, 0x00039c6f,	"236655", "%.0d",
-__LINE__, 0x3625286c,	"908404844", "%.1d",
-__LINE__, 0xfffffffa,	"fffffffa", "%x",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, 0x00c34353,	"12796755", "%#.4d",
-__LINE__, 0x000002df,	"735", "%ld",
-__LINE__, 0xffff38fa,	"FFFF38FA", "%5.1X",
-__LINE__, -0x000002a,	"-42", "%0.d",
-__LINE__, 0x0000077e,	"1918", "%ld",
-__LINE__, 0x000001f7,	"503", "%ld",
-__LINE__, 0x00000004,	"4", "%ld",
-__LINE__, 0x0021fb02,	"2226946", "%d",
-__LINE__, 0x007c858d,	"8160653", "%-0d",
-__LINE__, -0x0000109,	"-265", "%.0d",
-__LINE__, 0xfffffffa,	"fffffffa", "% x",
-__LINE__, 0x0097932d,	"97932d", "%+x",
-__LINE__, 0xfffbbd03,	"fffbbd03", "%-.5x",
-__LINE__, -0x0000005,	"-5", "%0d",
-__LINE__, 0x03ee3a95,	"65944213", "%ld",
-__LINE__, -0x0000002,	" -00002", "%7.5d",
-__LINE__, 0xea1a4e54,	"EA1A4E54", "%X",
-__LINE__, -0x000a9d6,	"-43478", "%+d",
-__LINE__, -0x0fd8d65,	"-16616805", "%5ld",
-__LINE__, 0x00000001,	"1", "%-d",
-__LINE__, 0x00000072,	"72", "%2.X",
-__LINE__, 0xffffff94,	"FFFFFF94", "%X",
-__LINE__, 0x00000d2a,	"D2A", "%+X",
-__LINE__, 0xffff614f,	"ffff614f", "%x",
-__LINE__, -0x0000018,	"-24", "%ld",
-__LINE__, 0x0000003b,	"059", "%2.3d",
-__LINE__, 0x0000001a,	"1A", "%0X",
-__LINE__, -0x0000109,	"-265", "%02ld",
-__LINE__, 0x00000f9d,	"3997", "%#1d",
-__LINE__, 0x0000001b,	"1b", "%x",
-__LINE__, 0xffffff07,	"ffffff07", "%x",
-__LINE__, 0xfff1a425,	"0xfff1a425", "%#x",
-__LINE__, 0x00000005,	"5", "%-1d",
-__LINE__, -0x53a6efd,	"-87715581", "%ld",
-__LINE__, 0x042f37db,	"42F37DB", "%6.X",
-__LINE__, 0x00053bd5,	"+342997", "%+5ld",
-__LINE__, 0xffffffff,	"ffffffff", "% x",
-__LINE__, 0xffffffef,	"FFFFFFEF", "%6.X",
-__LINE__, -0x10ec29a,	"-17744538", "%+2.d",
-__LINE__, 0x01dcc901,	"1dcc901", "%x",
-__LINE__, 0x0007dc68,	"515176", "%-3.d",
-__LINE__, -0x0000062,	"-0098", "%#2.4d",
-__LINE__, 0x00000000,	"   ", "%3.0X",
-__LINE__, -0x00000de,	"-222", "%ld",
-__LINE__, 0x000c1fb8,	"C1FB8", "%0X",
-__LINE__, 0x0005bf58,	"5BF58", "%X",
-__LINE__, -0x000dd1b,	"-56603", "%-03.1d",
-__LINE__, 0x00000b14,	"B14", "%+3.X",
-__LINE__, 0x00000799,	"799", "%-x",
-__LINE__, 0xfffffffa,	"fffffffa", "%x",
-__LINE__, 0x00000003,	"0x00003", "% #7.5x",
-__LINE__, -0x002b9f1,	"-178673", "%+d",
-__LINE__, -0x001b817,	"-112663", "%0d",
-__LINE__, 0xf6f98533,	"f6f98533", "%.1x",
-__LINE__, 0x00338ffc,	"3379196", "%d",
-__LINE__, 0x0409e9b5,	"0X409E9B5", "%#X",
-__LINE__, 0x00b8e98e,	" 12118414", "% 0d",
-__LINE__, -0x002a8f6,	"-174326", "%ld",
-__LINE__, 0x13bb9722,	"331061026", "%0d",
-__LINE__, 0x00063c71,	"63c71", "%x",
-__LINE__, 0xfffffe37,	"FFFFFE37", "%.1X",
-__LINE__, 0xffff7b3e,	"ffff7b3e", "%+.1x",
-__LINE__, 0x005eeab1,	"5eeab1", "%+x",
-__LINE__, 0xffc69e99,	"ffc69e99", "%x",
-__LINE__, -0x000005c,	"  -92", "%5ld",
-__LINE__, 0x07d8fa8a,	"7d8fa8a", "%x",
-__LINE__, 0x00030e0a,	"200202", "%-4.1d",
-__LINE__, 0x00001dc1,	"1DC1", "%.0X",
-__LINE__, 0x00000008,	"8", "%0ld",
-__LINE__, -0x01b5397,	"-1790871", "%3.d",
-__LINE__, 0x27fbb4b5,	"27fbb4b5", "%x",
-__LINE__, -0xe3fdcfc,	"-239066364", "%4ld",
-__LINE__, 0x0008bcb1,	"8bcb1", "%0x",
-__LINE__, 0xffff039e,	"ffff039e", "%.6x",
-__LINE__, 0x000d0bd4,	"d0bd4", "%-x",
-__LINE__, 0x00000000,	"+0", "%+d",
-__LINE__, -0x2a49ea4,	"-44342948", "%1d",
-__LINE__, -0x0000055,	"-85", "%0d",
-__LINE__, -0x0000a05,	"-2565", "%3.3ld",
-__LINE__, -0x000000b,	"-11 ", "%-4d",
-__LINE__, 0xfff30444,	"FFF30444", "%7.X",
-__LINE__, 0x0000003f,	"63", "%-0d",
-__LINE__, 0x00046779,	"46779", "%X",
-__LINE__, 0x000028d7,	" 0X28D7", "%#7.X",
-__LINE__, 0x00000019,	"   19", "%5x",
-__LINE__, 0x0032291d,	"3287325", "%2.ld",
-__LINE__, 0x00057afa,	"57AFA", "%X",
-__LINE__, 0xfffe8c64,	"fffe8c64", "%3.4x",
-__LINE__, -0x624110d6,	"-1648431318", "%+6d",
-__LINE__, 0x0000001a,	"   26", "% 5.d",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%6.X",
-__LINE__, 0x00199490,	"1676432", "%-1d",
-__LINE__, -0xfff8265,	"-268403301", "%-0ld",
-__LINE__, 0x0000000e,	"e", "%-x",
-__LINE__, 0x00c38aec,	"c38aec", "%x",
-__LINE__, -0x00658f4,	"-415988", "%#ld",
-__LINE__, 0x0066ac4e,	"6728782", "%0d",
-__LINE__, 0xc4a808d5,	"c4a808d5", "%x",
-__LINE__, 0x00000000,	"     0", "%6.1x",
-__LINE__, 0x00066d24,	"66d24", "%x",
-__LINE__, 0x00002117,	"2117", "%X",
-__LINE__, 0xfe06fdf4,	"FE06FDF4", "%0X",
-__LINE__, 0xfffffff9,	"fffffff9", "%x",
-__LINE__, 0x1c6bb795,	"+476821397", "%+d",
-__LINE__, 0xfffffba4,	"FFFFFBA4", "%X",
-__LINE__, 0xfffd7d44,	"fffd7d44", "%0x",
-__LINE__, 0x0019dd17,	"1694999", "%d",
-__LINE__, 0x6475851e,	"0x6475851e", "% #7.x",
-__LINE__, -0x00330d5,	"-209109", "%0ld",
-__LINE__, 0x009f53f7,	"09F53F7", "%+6.7X",
-__LINE__, -0x00172f9,	" -94969", "%7.5ld",
-__LINE__, 0xffffffdc,	"FFFFFFDC", "%X",
-__LINE__, -0x013bdec,	"-1293804", "%+#2ld",
-__LINE__, 0xfff845c0,	"fff845c0", "%+7.x",
-__LINE__, -0x0fbe712,	"-16508690", "%.7d",
-__LINE__, 0xffffe13f,	"ffffe13f", "%x",
-__LINE__, 0xbbc19951,	"BBC19951", "%-4X",
-__LINE__, -0x28d6d1b,	"-42822939", "%#d",
-__LINE__, -0x93cda6b,	"-154983019", "%-d",
-__LINE__, 0xffc93342,	"FFC93342", "%7.X",
-__LINE__, 0x072ac8b3,	" 120244403", "% ld",
-__LINE__, 0xfff8d17b,	"FFF8D17B", "% X",
-__LINE__, 0x00000da5,	"DA5", "%0.X",
-__LINE__, 0x055ad3ac,	"0x55ad3ac", "%#1x",
-__LINE__, 0x00000e5a,	" 3674", "% .4ld",
-__LINE__, 0xffffff79,	"FFFFFF79", "%+X",
-__LINE__, 0xffffe167,	"ffffe167", "%+5x",
-__LINE__, 0x0000fa50,	"0064080", "%.7ld",
-__LINE__, 0x00000001,	"1", "%-d",
-__LINE__, 0xfffffffe,	"fffffffe", "%x",
-__LINE__, 0x000009ac,	" 2476", "% #2.ld",
-__LINE__, 0x00000e78,	"0003704", "%.7ld",
-__LINE__, -0x000dfc3,	"-57283", "%6.d",
-__LINE__, 0x00000ee0,	"EE0", "%0X",
-__LINE__, -0x293703b3,	"-691471283", "%ld",
-__LINE__, 0x000073e8,	"  73e8", "%6x",
-__LINE__, 0xffffdffd,	"ffffdffd", "%5.5x",
-__LINE__, 0x00000004,	"4", "%+00.x",
-__LINE__, 0x00000008,	"0X8", "%#X",
-__LINE__, 0x0003044c,	"3044c", "%0x",
-__LINE__, 0xffc2095e,	"FFC2095E", "%0X",
-__LINE__, 0x00000aac,	"0002732", "%-.7ld",
-__LINE__, 0xffffff79,	"FFFFFF79", "%+1.X",
-__LINE__, 0x53a0f94a,	" 1403058506", "% 2.4ld",
-__LINE__, 0x000e928d,	"e928d", "%x",
-__LINE__, 0x0024127a,	"2364026", "%5.d",
-__LINE__, 0x000f7c1c,	" 1014812", "% 2.d",
-__LINE__, -0x000003d,	"-61 ", "%-#4ld",
-__LINE__, -0x0000122,	"-290", "%+ld",
-__LINE__, 0x00000006,	"+6", "%+0d",
-__LINE__, 0x00000129,	" 000129", "%7.6X",
-__LINE__, 0x15d873e5,	" 366506981", "% 5.7d",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0x038d6110,	"+59597072", "%+d",
-__LINE__, 0x0f46ccc3,	"256298179", "%-1.4d",
-__LINE__, 0xfe434d21,	"fe434d21", "%x",
-__LINE__, -0x179797d7,	"-395810775", "%d",
-__LINE__, 0xe35807bf,	"e35807bf", "%x",
-__LINE__, 0x00000003,	"     +3", "%+7d",
-__LINE__, 0x017e699e,	"25061790", "%#ld",
-__LINE__, -0x0000029,	"-41", "%d",
-__LINE__, 0xffffff11,	"ffffff11", "%1.x",
-__LINE__, -0x0001bf6,	"-7158", "%+0ld",
-__LINE__, 0xffffff4b,	"FFFFFF4B", "%4X",
-__LINE__, -0x0000040,	"-64", "%ld",
-__LINE__, 0x000034d6,	"+13526", "%+ld",
-__LINE__, 0xffffffa7,	"ffffffa7", "%x",
-__LINE__, 0xfffffe8e,	"fffffe8e", "%+.3x",
-__LINE__, 0x00000000,	"0", "%0.1d",
-__LINE__, -0x007cdf1,	"-511473", "%ld",
-__LINE__, 0xfffffeef,	"FFFFFEEF", "%-X",
-__LINE__, 0x00002d91,	"2d91", "%x",
-__LINE__, -0x000025b,	"-603", "%#ld",
-__LINE__, -0x000001b,	"-27", "%-ld",
-__LINE__, 0x042b6752,	"42B6752", "%+X",
-__LINE__, -0x75afb0a6,	"-1974448294", "% ld",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x00000542,	"  1346", "%6d",
-__LINE__, -0x0000010,	"-16", "%+0d",
-__LINE__, 0xfffed8f7,	"FFFED8F7", "%5.X",
-__LINE__, 0x0541852e,	"541852e", "% 2.x",
-__LINE__, 0xff22aec3,	"ff22aec3", "% .1x",
-__LINE__, 0x5e34b745,	"1580513093", "%ld",
-__LINE__, 0xfffffff3,	"fffffff3", "%x",
-__LINE__, 0x0eda7b86,	"+249199494", "%+.3d",
-__LINE__, 0xffffe40f,	"ffffe40f", "%+x",
-__LINE__, -0x0003484,	"-13444", "%-1.5ld",
-__LINE__, 0x0000334b,	" 13131", "%6.ld",
-__LINE__, -0x0000149,	"-329", "%ld",
-__LINE__, 0x00000001,	"  001", "% 5.3x",
-__LINE__, 0xffeaa035,	"ffeaa035", "%+3.5x",
-__LINE__, 0x00211dff,	"2170367", "%ld",
-__LINE__, 0x007e91f4,	"7e91f4", "%x",
-__LINE__, 0xfffffffc,	"0xfffffffc", "%+#5x",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%6.X",
-__LINE__, 0x0156a9b5,	"156a9b5", "%x",
-__LINE__, 0xfffffe58,	"fffffe58", "%+x",
-__LINE__, 0xffff8c66,	"FFFF8C66", "%.0X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x00000005,	"      5", "%7.d",
-__LINE__, -0x0000002,	"-2", "%ld",
-__LINE__, 0x000076b9,	" 30393", "% ld",
-__LINE__, 0x00003824,	"3824", "%4X",
-__LINE__, 0x00000cdf,	"    CDF", "% 7X",
-__LINE__, 0x017c9e8f,	"17C9E8F", "%-X",
-__LINE__, -0x20f582d,	"-34560045", "%-.5d",
-__LINE__, 0x0000732e,	"  29486", "% 7.ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%+0X",
-__LINE__, 0xf379a4a2,	"F379A4A2", "% .7X",
-__LINE__, -0x0000028,	"-40", "%-d",
-__LINE__, 0xe73cf79e,	"e73cf79e", "%x",
-__LINE__, 0x00000002,	"      2", "%7ld",
-__LINE__, -0x00029b1,	"-10673", "%-#1.ld",
-__LINE__, -0x0002a58,	"-10840", "%3.d",
-__LINE__, 0x00000002,	"2", "%-X",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%X",
-__LINE__, -0x000003a,	"  -58", "%5ld",
-__LINE__, 0x0245ef3b,	"245ef3b", "%.3x",
-__LINE__, 0x00026cca,	"158922", "%-06.3ld",
-__LINE__, 0x01016fd3,	"16871379", "%-d",
-__LINE__, 0x000016fc,	"5884", "%0ld",
-__LINE__, -0x00007fb,	"  -2043", "%7.3d",
-__LINE__, 0xfff73d3c,	"fff73d3c", "%0x",
-__LINE__, -0x0000110,	"-272", "% 04.3d",
-__LINE__, 0x0000000e,	" 014", "% 04ld",
-__LINE__, -0x0000039,	"-57", "%.0ld",
-__LINE__, 0x00000c95,	"c95", "%0x",
-__LINE__, 0xffff3b2e,	"ffff3b2e", "%x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, 0x00000015,	"21", "%.1d",
-__LINE__, 0x0000000c,	"+12", "%+ld",
-__LINE__, 0x00000000,	"0", "%+X",
-__LINE__, 0xfffc9a14,	"fffc9a14", "%-.5x",
-__LINE__, 0x0000003c,	"60", "%.2ld",
-__LINE__, -0x0000023,	"   -35", "%6.d",
-__LINE__, 0x00000740,	"1856", "%ld",
-__LINE__, 0x00000160,	"160", "% 3.X",
-__LINE__, 0x00000006,	"    6", "%5.X",
-__LINE__, -0x0000677,	"-1655", "%.3ld",
-__LINE__, 0x12709c7e,	"12709C7E", "%.7X",
-__LINE__, 0x0000090f,	"+2319", "%+#d",
-__LINE__, 0xffffffe0,	"0xffffffe0", "%#4.1x",
-__LINE__, 0x00132ce0,	"1256672", "%ld",
-__LINE__, 0x00000059,	"59", "%+X",
-__LINE__, -0x0000017,	"-23", "%0d",
-__LINE__, -0x01fade6,	"-2076134", "%-4.3ld",
-__LINE__, 0x000df3fa,	"914426", "%.5ld",
-__LINE__, 0xfffffd0f,	"fffffd0f", "%7x",
-__LINE__, -0x000c212,	"-49682", "%0.1ld",
-__LINE__, 0xffff8bcb,	"FFFF8BCB", "%.3X",
-__LINE__, 0x0000000a,	"a", "% x",
-__LINE__, 0x00000021,	"21", "%x",
-__LINE__, -0x0000040,	"-64", "% 1ld",
-__LINE__, 0x00000009,	"     9", "%6.ld",
-__LINE__, -0x0000d67,	"-3431", "% 5.3d",
-__LINE__, 0x03a85f1b,	"61366043", "%ld",
-__LINE__, 0x00000035,	"000053", "%0.6d",
-__LINE__, 0xfffda5cb,	"fffda5cb", "%+x",
-__LINE__, 0xffffff78,	"FFFFFF78", "%-7.0X",
-__LINE__, 0xfffffd6d,	"fffffd6d", "%7.x",
-__LINE__, 0xfffffc08,	"fffffc08", "%7.3x",
-__LINE__, 0x00003335,	" 13109", "% #d",
-__LINE__, -0x0000002,	"   -2", "%5.d",
-__LINE__, -0x13767a48,	"-326531656", "%+ld",
-__LINE__, 0x00000be5,	"3045", "%4.0ld",
-__LINE__, 0xfffdb28c,	"FFFDB28C", "%X",
-__LINE__, 0x00127118,	"1208600", "%ld",
-__LINE__, 0x00000086,	" 134", "% ld",
-__LINE__, 0x0002214c,	"2214c", "%+x",
-__LINE__, 0x0000a0c2,	" a0c2", "%5.0x",
-__LINE__, -0x000007c,	"-124", "%ld",
-__LINE__, 0x0000012a,	"00298", "%3.5d",
-__LINE__, 0xfd4f1257,	"FD4F1257", "%+2.X",
-__LINE__, 0xffffd8aa,	"ffffd8aa", "%5x",
-__LINE__, -0x00000a7,	"-167", "%+ld",
-__LINE__, -0x0009c69,	"-40041", "%0.0ld",
-__LINE__, 0x02230418,	"35849240", "%-0.6ld",
-__LINE__, 0x00000000,	"     0", "%6x",
-__LINE__, 0xfffff184,	"fffff184", "%02.5x",
-__LINE__, -0x0ae967b,	"-11441787", "%d",
-__LINE__, 0x0015de3a,	"1433146", "%-5.3d",
-__LINE__, -0x0071e93,	"-466579", "%1.ld",
-__LINE__, 0xfffff8bd,	"fffff8bd", "%+x",
-__LINE__, -0x00000e4,	"-228", "%+ld",
-__LINE__, 0x000001d8,	" 472", "% .3ld",
-__LINE__, 0x00315faa,	"315faa", "%-0x",
-__LINE__, 0x00000e59,	"e59", "%0x",
-__LINE__, -0x0000005,	"-5", "%ld",
-__LINE__, 0x000018ec,	"6380", "%ld",
-__LINE__, 0xfffffff9,	"fffffff9", "%5.2x",
-__LINE__, -0xe7cfd39,	"-243072313", "%-d",
-__LINE__, 0x0002c30b,	"2C30B", "%1.2X",
-__LINE__, 0x0000007a,	"7A", "%X",
-__LINE__, 0xf604ecb2,	"F604ECB2", "%2X",
-__LINE__, -0x05f602c,	"-6250540", "%d",
-__LINE__, 0xffff9c86,	"ffff9c86", "%2.x",
-__LINE__, -0x00d7f55,	"-884565", "%#d",
-__LINE__, 0xd2a37824,	"D2A37824", "%4X",
-__LINE__, 0x00000000,	"", "%-.0x",
-__LINE__, 0x000d4b51,	"0d4b51", "%3.6x",
-__LINE__, 0x000ecd97,	"ecd97", "% x",
-__LINE__, -0x0000018,	"-024", "%+04ld",
-__LINE__, -0x009f292,	"-651922", "%ld",
-__LINE__, -0x0002da9,	"-11689", "%-0ld",
-__LINE__, -0x000a218,	"-41496", "%4.5d",
-__LINE__, 0xffff85ac,	"FFFF85AC", "% 04.X",
-__LINE__, -0x0d9ffbe,	"-14286782", "%0d",
-__LINE__, 0xfb18cc8e,	"fb18cc8e", "%x",
-__LINE__, 0xffffe5d3,	"FFFFE5D3", "%-X",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, -0x0000006,	"-6", "% d",
-__LINE__, 0x0002fc62,	"2fc62", "% 03.x",
-__LINE__, 0x00000000,	"00", "%.2d",
-__LINE__, -0x00000fd,	"  -253", "%6ld",
-__LINE__, -0x000000b,	"-11", "%d",
-__LINE__, -0x00042a3,	"-17059", "% 6d",
-__LINE__, 0x00000002,	"2", "% X",
-__LINE__, -0x61ead93e,	"-1642780990", "%-0d",
-__LINE__, 0xf2e61f6d,	"f2e61f6d", "%-.4x",
-__LINE__, 0xffd31b93,	"ffd31b93", "%x",
-__LINE__, -0x0000008,	"-8", "%ld",
-__LINE__, 0xffffffff,	"ffffffff", "%00x",
-__LINE__, 0x000000fb,	"+000251", "%+2.6d",
-__LINE__, 0x00000015,	"  15", "%4.X",
-__LINE__, 0x06ec6d96,	"6EC6D96", "%+2.X",
-__LINE__, 0xffff1df7,	"0xffff1df7", "% #1x",
-__LINE__, -0x000004b,	"-75", "%-ld",
-__LINE__, 0x00000008,	"8", "%#.0d",
-__LINE__, 0x00001355,	"4949", "%3.4ld",
-__LINE__, -0x00000f7,	"-247", "%d",
-__LINE__, 0x0000001f,	"31", "%.2ld",
-__LINE__, 0x0000d556,	"D556", "%-X",
-__LINE__, 0xffffd5a5,	"ffffd5a5", "% x",
-__LINE__, -0x0000e34,	"-3636", "%#d",
-__LINE__, -0x0000007,	"-7", "%d",
-__LINE__, 0x01ba10a4,	"1ba10a4", "%x",
-__LINE__, 0xfffff759,	"FFFFF759", "% X",
-__LINE__, -0x80d0adb,	"-135072475", "%d",
-__LINE__, 0x0002bf61,	"2bf61", "%x",
-__LINE__, 0xffff008b,	"FFFF008B", "%-7X",
-__LINE__, 0x00000e72,	"E72", "%X",
-__LINE__, -0x00000ea,	"-234", "%0ld",
-__LINE__, -0x0007b9d,	"-0031645", "%0.7ld",
-__LINE__, 0x0001baaa,	"0X1BAAA", "%#4X",
-__LINE__, 0x0000a57f,	"  a57f", "%6.x",
-__LINE__, -0x21a73726,	"-564606758", "%ld",
-__LINE__, 0x06f45c9f,	"0x6f45c9f", "%#.3x",
-__LINE__, 0x00018e5d,	"101981", "%-d",
-__LINE__, 0x0001e69a,	"124570", "%-d",
-__LINE__, -0x0000d26,	"  -3366", "% 07.d",
-__LINE__, 0x00000000,	"+", "%+0.ld",
-__LINE__, 0x00003916,	"14614", "%ld",
-__LINE__, 0xfffffd8f,	"fffffd8f", "%-3.x",
-__LINE__, 0x00000011,	"11", "%x",
-__LINE__, 0x000000e7,	"E7", "%X",
-__LINE__, 0xfdf9d89b,	"FDF9D89B", "%X",
-__LINE__, 0x00000a7c,	"a7c", "%x",
-__LINE__, 0x0000003f,	"00003F", "%.6X",
-__LINE__, 0xffffe729,	"FFFFE729", "%X",
-__LINE__, 0xfffffffe,	"fffffffe", "% .6x",
-__LINE__, -0x0000a4b,	"-2635", "%+d",
-__LINE__, 0xffffff50,	"ffffff50", "%0.7x",
-__LINE__, 0xfaf57e8b,	"faf57e8b", "% 4.x",
-__LINE__, -0x0000056,	"-86", "%ld",
-__LINE__, 0x08ed2a4d,	"8ed2a4d", "%4x",
-__LINE__, 0xff8d9081,	"FF8D9081", "%+0.X",
-__LINE__, 0x002730a1,	"2568353", "%4d",
-__LINE__, 0xffff9564,	"ffff9564", "%x",
-__LINE__, -0x0000006,	"  -6", "%4ld",
-__LINE__, -0x19890310,	"-428409616", "%0ld",
-__LINE__, 0xd2ce636c,	"d2ce636c", "%+x",
-__LINE__, -0x00001fe,	"-510", "%d",
-__LINE__, 0x00000006,	"0000006", "%+0.7x",
-__LINE__, 0xffffffc2,	"0XFFFFFFC2", "%-#.5X",
-__LINE__, -0x00000fd,	"-253", "%+d",
-__LINE__, 0x000216aa,	"0x216aa", "%#x",
-__LINE__, 0xffe36c66,	"ffe36c66", "%x",
-__LINE__, 0x00000002,	"2", "%x",
-__LINE__, -0x0000025,	"-37", "% d",
-__LINE__, 0x0000007e,	"126", "%d",
-__LINE__, 0x0003c1f9,	"+246265", "%+ld",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, -0x00539e7,	"-342503", "%06.ld",
-__LINE__, 0x00000d42,	"  3394", "%#6.ld",
-__LINE__, 0xf73b7c4e,	"F73B7C4E", "%X",
-__LINE__, 0x00000022,	"22", "%.1x",
-__LINE__, 0xffffa883,	"FFFFA883", "%X",
-__LINE__, 0x016ec247,	"16ec247", "%x",
-__LINE__, 0x00000019,	"19", "%+X",
-__LINE__, 0x0000665a,	"665A", "% 2.X",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%-5.X",
-__LINE__, 0x008e3fbc,	"8E3FBC", "%X",
-__LINE__, 0xfffffffa,	"FFFFFFFA", "%X",
-__LINE__, 0x1b806597,	"461399447", "%.2d",
-__LINE__, 0x00000366,	"0000870", "%#1.7ld",
-__LINE__, 0x0001d92e,	"1d92e", "%x",
-__LINE__, 0x000104ce,	"104CE", "%-X",
-__LINE__, 0xfffffe4c,	"fffffe4c", "%x",
-__LINE__, 0x000000e9,	"E9", "%X",
-__LINE__, 0x000a855c,	" 689500", "% d",
-__LINE__, 0x00000075,	"75", "% X",
-__LINE__, -0x0000026,	"-38", "%ld",
-__LINE__, 0xfffff169,	"fffff169", "%-04.2x",
-__LINE__, 0xffffff6f,	"ffffff6f", "%x",
-__LINE__, 0x00000003,	"0x3", "%#x",
-__LINE__, 0x00623bab,	"6437803", "%.0d",
-__LINE__, -0x2260224c,	"-576725580", "%ld",
-__LINE__, 0xe7e7a998,	"E7E7A998", "%.1X",
-__LINE__, 0x00000005,	"5", "%X",
-__LINE__, 0x0000b560,	"0xb560", "%#x",
-__LINE__, 0xfe11854d,	"fe11854d", "%-.5x",
-__LINE__, 0x00190014,	"1638420", "%ld",
-__LINE__, 0x0001d22a,	"0X1D22A", "%-#X",
-__LINE__, 0x00000c16,	"c16", "%2x",
-__LINE__, 0x00000d1a,	"3354", "%#d",
-__LINE__, 0x000165f6,	"91638", "%d",
-__LINE__, 0xfffff557,	"0XFFFFF557", "%#X",
-__LINE__, 0x00000588,	"    588", "%07.X",
-__LINE__, 0xf4a72708,	"f4a72708", "%x",
-__LINE__, 0xfff1cba9,	"0xfff1cba9", "% #2.5x",
-__LINE__, 0x000333a4,	"209828", "%d",
-__LINE__, 0x0000179b,	"179B", "% 2.X",
-__LINE__, 0x00000460,	"1120", "%0ld",
-__LINE__, 0xffffff89,	"FFFFFF89", "%X",
-__LINE__, -0x0000012,	"-18", "%ld",
-__LINE__, 0x00004fe0,	"20448", "%0.d",
-__LINE__, 0x00532e77,	"532e77", "%00.x",
-__LINE__, 0xf7b92efe,	"f7b92efe", "%0x",
-__LINE__, -0x0000243,	"-579", "%+1.d",
-__LINE__, 0x34894bb7,	"+881413047", "%+d",
-__LINE__, 0xfffaa189,	"FFFAA189", "% 6X",
-__LINE__, -0x0000579,	"-1401", "%+ld",
-__LINE__, 0x005acb12,	"5acb12", "%5.0x",
-__LINE__, 0xffff890a,	"FFFF890A", "%X",
-__LINE__, 0x010dff2f,	"10DFF2F", "%.7X",
-__LINE__, 0x00005a7f,	"23167", "%#ld",
-__LINE__, 0x000005e3,	"1507", "%#3d",
-__LINE__, -0xa815bcb,	"-176249803", "%d",
-__LINE__, 0xffffffff,	"ffffffff", "%+x",
-__LINE__, 0xfffe0ff7,	"fffe0ff7", "%3x",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#2.1X",
-__LINE__, -0x1cc5ea52,	"-482732626", "%6.d",
-__LINE__, 0x000425ed,	"+0271853", "%+.7d",
-__LINE__, 0x00000001,	"1", "%+x",
-__LINE__, -0x48f2a72,	"-76491378", "%7.0d",
-__LINE__, 0xfffffff7,	"FFFFFFF7", "% 0X",
-__LINE__, 0xfd8ffc0a,	"fd8ffc0a", "%.1x",
-__LINE__, 0x0001f56d,	"  1F56D", "%+7.2X",
-__LINE__, 0x000000db,	"    DB", "%6.X",
-__LINE__, 0xffffffc2,	"ffffffc2", "%x",
-__LINE__, 0x00000001,	"001", "%03ld",
-__LINE__, 0xffd89f58,	"ffd89f58", "% 0.x",
-__LINE__, 0xfe1a72fc,	"fe1a72fc", "%x",
-__LINE__, 0xfffff9b6,	"FFFFF9B6", "%X",
-__LINE__, 0x00243633,	"243633", "%X",
-__LINE__, 0x00821bc7,	"+8526791", "%+#0ld",
-__LINE__, 0xfe63f348,	"0XFE63F348", "%#3X",
-__LINE__, 0xff729f19,	"ff729f19", "%4x",
-__LINE__, 0xffff570f,	"FFFF570F", "%+X",
-__LINE__, 0x00a57a42,	"10844738", "%6.3d",
-__LINE__, 0xfe4a3ed0,	"FE4A3ED0", "%6.X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x000001bb,	"01bb", "% .4x",
-__LINE__, 0x02b4a1e9,	"2b4a1e9", "%-7.x",
-__LINE__, 0x31750683,	"31750683", "%x",
-__LINE__, 0x00001cd7,	"7383", "%#ld",
-__LINE__, 0x0000079d,	"1949", "%d",
-__LINE__, 0xffb8ff3b,	"FFB8FF3B", "%X",
-__LINE__, 0x00a768b6,	"0A768B6", "%-6.7X",
-__LINE__, 0x1c665b48,	"0X1C665B48", "% #X",
-__LINE__, -0x000037d,	"-000893", "%3.6d",
-__LINE__, 0x29890443,	"29890443", "%+0x",
-__LINE__, 0x000000e5,	"e5  ", "%-4x",
-__LINE__, 0xfff2b5fa,	"FFF2B5FA", "%X",
-__LINE__, -0x5d32c2b,	"-97725483", "%05ld",
-__LINE__, -0x00016c5,	" -05829", "%+#7.5ld",
-__LINE__, 0x00000644,	"644", "%X",
-__LINE__, -0x018c027,	"-1622055", "%+.1d",
-__LINE__, 0x0000013c,	"0x13c", "%#x",
-__LINE__, 0x00000009,	"+9", "%+#ld",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, -0x018eb19,	"-1633049", "%4.3ld",
-__LINE__, 0xfffff429,	"FFFFF429", "% X",
-__LINE__, 0x0032de67,	"32DE67", "%X",
-__LINE__, 0x0016bdfa,	" 1490426", "% .2ld",
-__LINE__, 0x00000065,	"65", "%+.0X",
-__LINE__, 0x00000072,	"  72", "%+4.2X",
-__LINE__, 0x00075119,	"75119", "%2x",
-__LINE__, 0x000000b8,	"b8", "%x",
-__LINE__, 0x000000d0,	"d0", "%x",
-__LINE__, 0x000000b9,	"b9", "%x",
-__LINE__, 0x003fda9d,	" 4184733", "% #3.d",
-__LINE__, 0x00029a24,	"170532", "%4.d",
-__LINE__, -0x132a337d,	"-321532797", "% ld",
-__LINE__, 0x0000047a,	"0X47A", "%-#X",
-__LINE__, 0x00000000,	"0", "%-ld",
-__LINE__, -0x0d9750b,	"-14251275", "% ld",
-__LINE__, 0x00029d6c,	"29d6c", "%x",
-__LINE__, 0xfb060cc0,	"fb060cc0", "%x",
-__LINE__, 0xffffd524,	"0XFFFFD524", "%#X",
-__LINE__, 0xffffff30,	"ffffff30", "%-5x",
-__LINE__, 0x00001650,	"0005712", "%#0.7d",
-__LINE__, 0x0000b702,	"0B702", "%03.5X",
-__LINE__, 0x000003c1,	"3c1", "% .1x",
-__LINE__, -0x0290412,	"-2688018", "%d",
-__LINE__, -0x00008bf,	"-2239", "%#d",
-__LINE__, -0x0000001,	"-1", "%d",
-__LINE__, 0x0001d750,	"1D750", "%-X",
-__LINE__, 0x006eee92,	"6EEE92", "%-X",
-__LINE__, 0xff812b02,	"ff812b02", "%0x",
-__LINE__, 0xfffffeac,	"FFFFFEAC", "%+0X",
-__LINE__, 0x000003a5,	"3a5", "%x",
-__LINE__, -0x15270cee,	"-354880750", "%2.ld",
-__LINE__, 0x06b686d2,	"6b686d2", "%0x",
-__LINE__, 0xffe9cdcc,	"ffe9cdcc", "%x",
-__LINE__, 0x0ecb168e,	"ecb168e", "%x",
-__LINE__, 0x00000051,	"51", "%-X",
-__LINE__, -0x0018860,	"-100448", "%-0d",
-__LINE__, 0x8f08b82b,	"0x8f08b82b", "%-#.5x",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, 0x0000000e,	"e", "%+01x",
-__LINE__, 0x04cf15bc,	" 80680380", "% #ld",
-__LINE__, 0x50006e8a,	"50006e8a", "%x",
-__LINE__, 0x0002f669,	"194153", "%0d",
-__LINE__, 0x000000a6,	"  166", "% 5.ld",
-__LINE__, -0x04036bb,	"-4208315", "%7.5d",
-__LINE__, 0x00070dea,	"70DEA", "%+X",
-__LINE__, 0x00000964,	"0x964", "%#x",
-__LINE__, 0x0000004d,	"0x4d", "% #3.x",
-__LINE__, -0x0000001,	"-1", "%-0d",
-__LINE__, 0x0000043e,	"1086", "%ld",
-__LINE__, -0x0000001,	"-1", "%-d",
-__LINE__, 0x00000000,	"+0", "%+d",
-__LINE__, 0xfffe68d9,	"FFFE68D9", "%7.X",
-__LINE__, -0x0169199,	"-1479065", "%#.5ld",
-__LINE__, -0x000003d,	"-61", "%ld",
-__LINE__, 0x00000001,	"+1", "%+.1d",
-__LINE__, 0x0001a65d,	"1a65d", "%.5x",
-__LINE__, 0x00000141,	"+000321", "%+#5.6ld",
-__LINE__, 0x00000000,	"   0", "%4x",
-__LINE__, 0x00000408,	"1032", "%-2.3ld",
-__LINE__, 0xffffffed,	"FFFFFFED", "%-X",
-__LINE__, 0xfe832351,	"FE832351", "% .4X",
-__LINE__, 0x003a421b,	"3A421B", "%-X",
-__LINE__, -0x53ed7f25,	"-1408073509", "%ld",
-__LINE__, -0x0000003,	"-0003", "%-5.4ld",
-__LINE__, 0x00000ad0,	"   2768", "%7d",
-__LINE__, 0xfffaf30b,	"FFFAF30B", "%X",
-__LINE__, 0x006349d3,	" 6506963", "% 6.2ld",
-__LINE__, 0x07f0146a,	"7f0146a", "%+3.4x",
-__LINE__, -0x0000002,	" -2", "% 3.ld",
-__LINE__, -0x26e94f3,	"-40801523", "%-#ld",
-__LINE__, -0x0000004,	"   -004", "%7.3d",
-__LINE__, 0xfffe8cc9,	"FFFE8CC9", "%0X",
-__LINE__, 0x00000018,	"   18", "%5.x",
-__LINE__, -0x4941de83,	"-1229053571", "% 0.5ld",
-__LINE__, 0x00000000,	"     0", "%6ld",
-__LINE__, 0xfffffffe,	"0XFFFFFFFE", "%-#X",
-__LINE__, -0x0142ae1,	"-1321697", "%4.ld",
-__LINE__, -0x0319e7f,	"-3251839", "%0ld",
-__LINE__, 0x000004ff,	"    4FF", "%7.2X",
-__LINE__, -0x0001c3e,	"-7230", "%#.2ld",
-__LINE__, 0xffffe522,	"ffffe522", "%x",
-__LINE__, 0x0001d1cb,	"+119243", "%+.3ld",
-__LINE__, 0xfad19d52,	"FAD19D52", "%+X",
-__LINE__, 0x00002a7c,	" 10876", "% 0.ld",
-__LINE__, 0x00001449,	"1449", "%X",
-__LINE__, 0x000732b8,	"471736", "%d",
-__LINE__, -0x211a496e,	"-555370862", "%ld",
-__LINE__, -0x0000004,	"-4", "%1.d",
-__LINE__, 0x0295c03d,	"43368509", "%5.ld",
-__LINE__, 0x01fa5722,	"33183522", "%0ld",
-__LINE__, 0xfffbff62,	"0xfffbff62", "%#x",
-__LINE__, 0x000000f5,	" 245", "% 2.d",
-__LINE__, 0x000000a0,	"160", "%-d",
-__LINE__, 0x0000000f,	"15", "%.2ld",
-__LINE__, 0x0bf5f077,	"+200667255", "%+ld",
-__LINE__, -0x14d3e5a,	"-21839450", "%#2.3d",
-__LINE__, -0x21cbe656,	"-567010902", "%ld",
-__LINE__, 0x000002b9,	"697", "%ld",
-__LINE__, 0xfffff9b0,	"FFFFF9B0", "%X",
-__LINE__, 0x007fd9c7,	"8378823", "%3.4d",
-__LINE__, 0x00036d06,	"36d06", "%x",
-__LINE__, 0xffde8052,	"FFDE8052", "%4.6X",
-__LINE__, 0x0000000d,	"13", "%#d",
-__LINE__, 0x68157d93,	"68157d93", "%x",
-__LINE__, 0x00000005,	"5", "%1x",
-__LINE__, 0xfffffff4,	"FFFFFFF4", "%X",
-__LINE__, 0xf5bbf7e9,	"f5bbf7e9", "%+.1x",
-__LINE__, 0x0be98f98,	"BE98F98", "%X",
-__LINE__, 0x00000122,	"00122", "%.5X",
-__LINE__, -0x0000936,	"-2358", "%+#3.0ld",
-__LINE__, 0xfd230f09,	"FD230F09", "%-7X",
-__LINE__, 0x00000089,	"137", "%ld",
-__LINE__, 0x00000078,	"    120", "%7d",
-__LINE__, -0x68ef2b6b,	"-1760504683", "%-ld",
-__LINE__, 0xc24480bb,	"C24480BB", "%+4X",
-__LINE__, 0xfefe36a2,	"FEFE36A2", "%0X",
-__LINE__, -0x35344ba,	"-55788730", "%7.d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%+.6X",
-__LINE__, -0x0000f40,	"-3904", "% ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%X",
-__LINE__, 0x58b37c4b,	"58b37c4b", "%2.2x",
-__LINE__, 0x000000e2,	"226", "%#ld",
-__LINE__, 0xfff5ebde,	"fff5ebde", "%-7.1x",
-__LINE__, 0x0c6ea9be,	"208579006", "%-ld",
-__LINE__, 0xff708c74,	"FF708C74", "% 4.X",
-__LINE__, 0x00000000,	"  0", "% 3X",
-__LINE__, 0x00000004,	"  4", "%03.d",
-__LINE__, 0x0919be7c,	"+152682108", "%+6.d",
-__LINE__, 0x00d4fd1e,	"13958430", "%0d",
-__LINE__, 0xfe77a69e,	"fe77a69e", "%-7.x",
-__LINE__, 0x284ded44,	"676195652", "%-#2ld",
-__LINE__, -0x00006e6,	"-1766", "% ld",
-__LINE__, -0x7dac7ea,	"-131778538", "%.0ld",
-__LINE__, 0x0003c50f,	"247055", "%#d",
-__LINE__, 0xfffffffc,	"fffffffc", "%-x",
-__LINE__, 0xfe0f0d1f,	"fe0f0d1f", "% 5.1x",
-__LINE__, 0x00000009,	"9", "%0ld",
-__LINE__, -0x0175cc1,	"-1531073", "%-04.d",
-__LINE__, 0x000e4da2,	" 937378", "% 4.ld",
-__LINE__, 0x00000762,	"762", "%-0.X",
-__LINE__, 0x005211bf,	"5211bf", "%-x",
-__LINE__, 0xfffffffb,	"fffffffb", "%+2.6x",
-__LINE__, 0x00008862,	"34914", "%ld",
-__LINE__, 0xfffc9754,	"fffc9754", "%+x",
-__LINE__, 0x0000716e,	"716E", "%X",
-__LINE__, 0x000000a8,	"a8", "%x",
-__LINE__, 0xffff84f5,	"ffff84f5", "%0x",
-__LINE__, 0x00005032,	"5032", "%x",
-__LINE__, 0xffe242b4,	"ffe242b4", "%6x",
-__LINE__, 0x002df9bd,	"3013053", "%ld",
-__LINE__, 0xffffe267,	"FFFFE267", "%.5X",
-__LINE__, 0xffffffc7,	"0xffffffc7", "%#x",
-__LINE__, -0x1727c38,	"-24280120", "%d",
-__LINE__, 0x01308072,	"1308072", "%x",
-__LINE__, -0x5883c7c,	"-92814460", "%+ld",
-__LINE__, 0x000030ad,	"30ad", "%x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, -0x2090a708,	"-546350856", "% d",
-__LINE__, 0x0024e6b4,	"2418356", "%#ld",
-__LINE__, 0x02db71ac,	"2DB71AC", "% 6.3X",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%2.7X",
-__LINE__, -0x000074e,	"  -1870", "%7.ld",
-__LINE__, -0x0011d84,	"-73092", "%d",
-__LINE__, 0x00160723,	"160723", "%1.3x",
-__LINE__, 0x00412929,	"4270377", "%-d",
-__LINE__, -0x0008fc6,	"-36806", "% d",
-__LINE__, 0x00000002,	"2", "%d",
-__LINE__, 0x0eb67ffa,	"eb67ffa", "%.4x",
-__LINE__, 0x05b86c3c,	"95972412", "%4.4d",
-__LINE__, 0xffffca9c,	"FFFFCA9C", "% 4.X",
-__LINE__, 0x0007d571,	"7d571", "%-0x",
-__LINE__, -0x000239b,	"-09115", "%5.5d",
-__LINE__, -0x0000155,	" -341", "%5.3ld",
-__LINE__, 0x00000034,	"34", "%x",
-__LINE__, -0x0000051,	"-81", "%.1ld",
-__LINE__, 0x309bbbe0,	"309bbbe0", "%x",
-__LINE__, 0x0075be1e,	" 7716382", "% #ld",
-__LINE__, 0x000002d5,	"2d5", "%x",
-__LINE__, 0x006b466d,	"6B466D", "%-0X",
-__LINE__, 0x01d6c30f,	"1D6C30F", "%4.X",
-__LINE__, 0x00000003,	"      3", "%07.x",
-__LINE__, 0xfffcc102,	"FFFCC102", "%6.X",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#X",
-__LINE__, 0xfffffffe,	"fffffffe", "%+x",
-__LINE__, 0x00000005,	"5", "%ld",
-__LINE__, 0xff060284,	"ff060284", "%x",
-__LINE__, 0x007a3325,	"7A3325", "%-X",
-__LINE__, 0xf5f595bd,	"F5F595BD", "%0X",
-__LINE__, 0xfffa3a10,	"FFFA3A10", "%0X",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, -0x15078f9,	"-22051065", "%7d",
-__LINE__, -0x0000002,	"-000002", "%.6d",
-__LINE__, 0x00000036,	"54", "%1.1ld",
-__LINE__, -0xbbecf6a,	"-197054314", "%ld",
-__LINE__, 0x0000043d,	"43D", "%X",
-__LINE__, 0xfffffffa,	"0xfffffffa", "% #6.x",
-__LINE__, 0x016759f8,	"23550456", "%0.ld",
-__LINE__, 0x000052d2,	"+21202", "%+6.2d",
-__LINE__, -0x007d232,	"-512562", "%ld",
-__LINE__, 0x00240be0,	"2362336", "%.1d",
-__LINE__, -0x0000001,	"-1", "%0d",
-__LINE__, 0xfffffffa,	"FFFFFFFA", "%X",
-__LINE__, -0x0000e88,	"-3720", "%ld",
-__LINE__, 0xfffffa9b,	"FFFFFA9B", "%.5X",
-__LINE__, 0x09296eeb,	"153710315", "%-1.0d",
-__LINE__, 0x001f46fc,	"0X1F46FC", "%#X",
-__LINE__, 0x00000006,	"6", "%X",
-__LINE__, 0xffffff87,	"0XFFFFFF87", "%+#X",
-__LINE__, 0x00000469,	"0469", "%04X",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x00000000,	"", "%.0ld",
-__LINE__, -0x52bc137,	"-86753591", "%-#3ld",
-__LINE__, -0x2bddb08,	"-45996808", "%-3.d",
-__LINE__, 0x041367f7,	"41367F7", "%+X",
-__LINE__, -0x0018eb5,	"-102069", "%+ld",
-__LINE__, -0x0000537,	"-1335", "%#ld",
-__LINE__, -0x6f159ff4,	"-1863688180", "%+1.d",
-__LINE__, 0x00112ac8,	"0X112AC8", "%#6.3X",
-__LINE__, 0x00000000,	"   ", "%3.d",
-__LINE__, 0x0008afe8,	"08afe8", "%+3.6x",
-__LINE__, 0x00000015,	"21", "%ld",
-__LINE__, -0x02b7130,	"-2847024", "% #2.4d",
-__LINE__, 0xffffffd0,	"FFFFFFD0", "%X",
-__LINE__, -0x6970fa1,	"-110563233", "%+#.4ld",
-__LINE__, 0x06387dcc,	"0X6387DCC", "%-#X",
-__LINE__, 0xffffd506,	"ffffd506", "%+6x",
-__LINE__, -0x00fe5cd,	"-1041869", "%-#7d",
-__LINE__, -0x0c35bf6,	"-12803062", "%-03d",
-__LINE__, -0x0020d89,	"-134537", "%#d",
-__LINE__, -0x0c7aed3,	"-13086419", "%-ld",
-__LINE__, -0x000362a,	"-13866", "%#.4ld",
-__LINE__, -0x02d05f0,	"-2950640", "%#ld",
-__LINE__, 0x02de1321,	"0x2de1321", "%#7.x",
-__LINE__, 0xffb56428,	"0xffb56428", "%#x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, 0xf072292d,	"F072292D", "%.5X",
-__LINE__, -0x0f4b0f2,	"-16036082", "%.5ld",
-__LINE__, 0x01b81885,	"28842117", "%5d",
-__LINE__, -0x009cfa6,	"-642982", "%d",
-__LINE__, 0xfffffffd,	"0XFFFFFFFD", "%-#.5X",
-__LINE__, 0x0dc97a66,	"DC97A66", "%2.X",
-__LINE__, 0x000000be,	"190", "%.0d",
-__LINE__, 0xffffe1c7,	"FFFFE1C7", "% X",
-__LINE__, 0x01883b9a,	"1883b9a", "%3x",
-__LINE__, 0xffffdde1,	"ffffdde1", "%+x",
-__LINE__, 0x2f1b4e32,	"+790318642", "%+ld",
-__LINE__, 0x000129aa,	"129aa", "%x",
-__LINE__, -0x00092c2,	"-37570", "%d",
-__LINE__, 0x00070fbd,	"70fbd", "%x",
-__LINE__, -0x00000ea,	"-234", "%+4ld",
-__LINE__, 0xfffffffe,	"fffffffe", "%x",
-__LINE__, 0x0091c7f7,	"91C7F7", "% .3X",
-__LINE__, -0x0c14fe2,	"-12668898", "%d",
-__LINE__, -0x0017c15,	"-97301", "%d",
-__LINE__, -0x00005d0,	"-0001488", "%5.7d",
-__LINE__, 0x0114c36e,	"18137966", "%0d",
-__LINE__, 0xffffffff,	"ffffffff", "%+x",
-__LINE__, 0x0ac76e78,	"180842104", "%d",
-__LINE__, 0x001976cd,	" 1668813", "% 4.ld",
-__LINE__, -0x0642319,	"-6562585", "% d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, -0x035019d,	"-3473821", "%.7d",
-__LINE__, -0x0000061,	"-97", "%#3.d",
-__LINE__, 0x0000001f,	"    31", "% 6.1ld",
-__LINE__, -0x0000024,	"-36", "%d",
-__LINE__, 0x000b3785,	"735109", "%ld",
-__LINE__, 0xfffffda9,	"fffffda9", "%-x",
-__LINE__, 0x00254832,	"2443314", "%-ld",
-__LINE__, 0xfffffd40,	"FFFFFD40", "%0X",
-__LINE__, -0x0006105,	"-24837", "%+#d",
-__LINE__, 0x00000006,	"+6", "%+d",
-__LINE__, 0xffd40fd8,	"ffd40fd8", "%3.x",
-__LINE__, -0x000988e,	"-39054", "%03d",
-__LINE__, 0x0005ad8b,	"5AD8B", "%0.0X",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0xfe1f59b7,	"fe1f59b7", "%4.x",
-__LINE__, -0x0000022,	"-34", "%#d",
-__LINE__, 0x0018e3e9,	"18E3E9", "% X",
-__LINE__, 0xffffff25,	"FFFFFF25", "%2.X",
-__LINE__, -0x00002c6,	"-710", "%1.ld",
-__LINE__, 0x00009765,	"38757", "%5ld",
-__LINE__, 0xfe197646,	"FE197646", "%-X",
-__LINE__, 0x00000001,	"    1", "%+5.x",
-__LINE__, -0x0000002,	"-2", "%#ld",
-__LINE__, 0x0072f6be,	"72F6BE", "%1X",
-__LINE__, -0x000f06d,	"-61549", "%-d",
-__LINE__, 0x00000001,	"    1", "%5X",
-__LINE__, 0x328cba28,	" 848083496", "% 2.ld",
-__LINE__, 0x0000cddc,	"cddc", "%.1x",
-__LINE__, 0xfffffff9,	"fffffff9", "%7x",
-__LINE__, 0x00baf511,	"BAF511", "%-5.6X",
-__LINE__, 0x00000001,	"   1", "%4.ld",
-__LINE__, 0x0001e4b0,	"+124080", "%+ld",
-__LINE__, -0x07548f3,	"-7686387", "% 6.d",
-__LINE__, -0x01b14ea,	"-1774826", "% #0d",
-__LINE__, -0x000005c,	"-92 ", "%-04ld",
-__LINE__, -0x00000ae,	"-174", "%+.3ld",
-__LINE__, 0x0000008c,	"0X8C", "%+#X",
-__LINE__, 0x14c02360,	"14C02360", "%.6X",
-__LINE__, 0xfffffff6,	"FFFFFFF6", "%X",
-__LINE__, 0x009f4ee5,	"9f4ee5", "%x",
-__LINE__, 0x00000035,	"35", "%X",
-__LINE__, -0x00000eb,	"-235", "%ld",
-__LINE__, 0x1552ced8,	"1552CED8", "%04X",
-__LINE__, 0x0000002a,	"   2A", "%5X",
-__LINE__, 0xffffffff,	"ffffffff", "% x",
-__LINE__, -0xdec0db2,	"-233573810", "%d",
-__LINE__, 0x001e2ef0,	"1978096", "%2.d",
-__LINE__, 0xffffef24,	"ffffef24", "%.5x",
-__LINE__, 0xfffe6a6c,	"fffe6a6c", "%+x",
-__LINE__, -0x0000004,	"-4", "% ld",
-__LINE__, 0xfe3c6743,	"fe3c6743", "%.1x",
-__LINE__, 0x0000033d,	"829", "%0ld",
-__LINE__, -0x00006a0,	"  -1696", "% 7.ld",
-__LINE__, 0xffffffdb,	"ffffffdb", "%0.0x",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%3.3X",
-__LINE__, -0x0000004,	"-4", "%#ld",
-__LINE__, 0x00b32b56,	"B32B56", "%X",
-__LINE__, 0xffffffff,	"0xffffffff", "%+#x",
-__LINE__, 0x01cd1a48,	"1cd1a48", "%+7x",
-__LINE__, 0xffffffda,	"ffffffda", "%x",
-__LINE__, 0x1886509e,	"1886509E", "% X",
-__LINE__, 0x000000eb,	"235", "%0d",
-__LINE__, 0xfffffff4,	"fffffff4", "%0x",
-__LINE__, 0x00000547,	"547", "% X",
-__LINE__, 0x000017e6,	"17e6", "%-2.x",
-__LINE__, 0x00001dc4,	"7620", "%d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%3.0X",
-__LINE__, 0xffff93fa,	"0XFFFF93FA", "%#X",
-__LINE__, 0xfffffe1c,	"FFFFFE1C", "%-X",
-__LINE__, 0x00000000,	"", "% .0x",
-__LINE__, 0x000000a1,	"A1", "%X",
-__LINE__, 0xffffffff,	"0xffffffff", "%#x",
-__LINE__, -0x0001460,	"-05216", "%+#.5d",
-__LINE__, 0x00000001,	"1     ", "%-6.x",
-__LINE__, 0xfffd5324,	"FFFD5324", "%+2.6X",
-__LINE__, 0x00000007,	"    07", "%06.2d",
-__LINE__, 0x00000003,	"3", "%-X",
-__LINE__, 0xfffffdb7,	"0XFFFFFDB7", "%+#X",
-__LINE__, 0xfffff4cc,	"fffff4cc", "%0x",
-__LINE__, 0x00000000,	"0    ", "%-5X",
-__LINE__, 0x00758c96,	"758C96", "%X",
-__LINE__, -0x0000001,	"-1", "%-ld",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0x03f03caf,	"66075823", "%.2ld",
-__LINE__, 0x0000a87c,	"a87c", "%1.x",
-__LINE__, 0x00000034,	"34", "%X",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0x00010167,	"10167", "%x",
-__LINE__, -0x00007ce,	"-1998 ", "%-6ld",
-__LINE__, 0x00000001,	"1", "%.0d",
-__LINE__, 0x00d94cee,	"14241006", "%ld",
-__LINE__, -0x0000008,	"-8", "% d",
-__LINE__, -0x71520839,	"-1901201465", "%+0d",
-__LINE__, 0x0000035a,	"35a", "%-x",
-__LINE__, 0xfffd2f68,	"FFFD2F68", "%-X",
-__LINE__, 0x0006ea53,	"453203", "%1d",
-__LINE__, 0x000000df,	"DF", "% 1X",
-__LINE__, 0xfffffffe,	"fffffffe", "% 7x",
-__LINE__, 0x00000156,	"156", "% X",
-__LINE__, 0x00037ac9,	" 228041", "% ld",
-__LINE__, 0xffffffde,	"FFFFFFDE", "%0.5X",
-__LINE__, 0x00000025,	"37", "%-0.ld",
-__LINE__, -0x4133686,	"-68368006", "%2ld",
-__LINE__, -0x000003b,	"-59", "%.2ld",
-__LINE__, 0xfffff910,	"fffff910", "% 00.0x",
-__LINE__, 0xff9ec802,	"FF9EC802", "%2.6X",
-__LINE__, 0x00000008,	"0X8", "%#1X",
-__LINE__, 0xfffffff7,	"FFFFFFF7", "%-X",
-__LINE__, 0x0029a4da,	"2729178", "%04.ld",
-__LINE__, 0x007d1588,	"8197512", "%#d",
-__LINE__, 0x0007e86d,	"518253", "%0d",
-__LINE__, 0xfffffff9,	"fffffff9", "%x",
-__LINE__, 0x00000002,	"002", "%.3d",
-__LINE__, 0x00006ec1,	"6EC1", "%2X",
-__LINE__, 0x0000300c,	"12300", "%-d",
-__LINE__, -0x0000002,	"-2", "%+ld",
-__LINE__, -0x0000002,	"-2", "%ld",
-__LINE__, -0x00015d5,	"-005589", "%#.6ld",
-__LINE__, 0x00000041,	"65", "%d",
-__LINE__, 0x00000229,	"0000229", "% 0.7x",
-__LINE__, 0xfffffffb,	"fffffffb", "%03.x",
-__LINE__, 0x00093262,	"0602722", "%.7d",
-__LINE__, -0x00037b4,	"-14260", "%-0ld",
-__LINE__, 0xfffffffc,	"fffffffc", "%-x",
-__LINE__, 0xf24cb3e6,	"f24cb3e6", "%1x",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%0X",
-__LINE__, 0x00000031,	"0000049", "%00.7ld",
-__LINE__, 0x00000bb3,	"BB3", "%.1X",
-__LINE__, -0x0000001,	"-0001", "%+#4.4ld",
-__LINE__, -0x0000001,	"-1", "% d",
-__LINE__, 0x00022c0c,	"22c0c", "%-x",
-__LINE__, 0xffffffd4,	"ffffffd4", "%x",
-__LINE__, 0x000729c6,	"469446", "%3.d",
-__LINE__, 0xb180feae,	"b180feae", "%3.x",
-__LINE__, 0x124fac15,	"307211285", "%-0ld",
-__LINE__, -0x0000004,	"-4", "%ld",
-__LINE__, 0x0000006a,	"106", "%#d",
-__LINE__, 0x0000297f,	"297F", "%+3X",
-__LINE__, 0x0000000e,	"14", "%0ld",
-__LINE__, 0x00000027,	"27", "%0.1X",
-__LINE__, 0xffeb98eb,	"ffeb98eb", "% 05.2x",
-__LINE__, 0xfffff19b,	"FFFFF19B", "%+X",
-__LINE__, 0x00025992,	"154002", "%6.6d",
-__LINE__, 0x00000040,	"   040", "%6.3X",
-__LINE__, 0x00000a9e,	" 0a9e", "%5.4x",
-__LINE__, 0x00c7f2cc,	"c7f2cc", "%x",
-__LINE__, 0x000325e6,	" 325E6", "%6.X",
-__LINE__, -0x69faad3,	"-111127251", "%d",
-__LINE__, -0x059a307,	"-5874439", "% ld",
-__LINE__, 0xfffffff6,	"0xfffffff6", "%#0.0x",
-__LINE__, 0x0030fdf3,	"30fdf3", "%x",
-__LINE__, 0x00007343,	"+29507", "%+#2d",
-__LINE__, 0x0003cf4b,	"0X3CF4B", "% #.2X",
-__LINE__, 0x00000433,	"+1075", "%+0ld",
-__LINE__, 0xfffffffd,	"fffffffd", "%+.3x",
-__LINE__, 0x0ae30c4e,	"ae30c4e", "%+00x",
-__LINE__, 0x0002540f,	"02540f", "%-.6x",
-__LINE__, -0x0000001,	"  -01", "% #5.2ld",
-__LINE__, 0xffffffe7,	"0xffffffe7", "% #5.x",
-__LINE__, 0x0000005b,	"91", "%d",
-__LINE__, 0x00001f9b,	"8091", "%.4ld",
-__LINE__, 0xfffff315,	"fffff315", "%4.x",
-__LINE__, -0x130eec41,	"-319745089", "% ld",
-__LINE__, 0xfff8fe13,	"FFF8FE13", "%X",
-__LINE__, -0x0000004,	"-00004", "%5.5d",
-__LINE__, 0x00000669,	"669", "%0X",
-__LINE__, -0x0000004,	"-4", "%d",
-__LINE__, 0xf5e81496,	"F5E81496", "% 6X",
-__LINE__, -0x0000001,	"-1", "% 0d",
-__LINE__, 0xfffffff7,	"fffffff7", "%x",
-__LINE__, 0x000001de,	"478", "%d",
-__LINE__, 0x0000623e,	"25150", "%5.0d",
-__LINE__, 0xffffffa8,	"FFFFFFA8", "%+X",
-__LINE__, -0x0000117,	"-279", "% ld",
-__LINE__, -0x0000517,	"-1303", "%d",
-__LINE__, 0xfffff9d5,	"fffff9d5", "% x",
-__LINE__, 0x000001cc,	"1CC", "%-X",
-__LINE__, 0x0000019a,	"0000410", "%.7d",
-__LINE__, 0x00000003,	"3     ", "%-06X",
-__LINE__, 0x00000009,	"0x9", "%#0x",
-__LINE__, 0xfd544610,	"0XFD544610", "% #X",
-__LINE__, 0xfffffffc,	"fffffffc", "%+x",
-__LINE__, 0x00009437,	"37943", "%ld",
-__LINE__, -0x00b5ea6,	"-745126", "%d",
-__LINE__, 0xffffffd8,	"ffffffd8", "%6x",
-__LINE__, 0x00002a2d,	"10797", "%.3ld",
-__LINE__, 0x00275238,	"2576952", "%0ld",
-__LINE__, 0xfff90a34,	"FFF90A34", "%-7X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "% .7X",
-__LINE__, -0xb3b673e,	"-188442430", "% ld",
-__LINE__, 0xfffff67a,	"0xfffff67a", "%#0.x",
-__LINE__, 0x0000dff6,	"   dff6", "%+7.x",
-__LINE__, 0xffee46e3,	"ffee46e3", "%x",
-__LINE__, 0x00001a66,	" 0006758", "% 7.7d",
-__LINE__, 0x0002b475,	"2B475", "%.4X",
-__LINE__, 0x0002090d,	"002090d", "%.7x",
-__LINE__, -0x0057838,	"-358456", "%#ld",
-__LINE__, 0x00000004,	"0x4", "%#x",
-__LINE__, 0x0574cb62,	"91540322", "%#7d",
-__LINE__, -0x0054388,	"-344968", "% #d",
-__LINE__, 0x000421c2,	"421C2", "% X",
-__LINE__, 0x00000003,	"3", "%0d",
-__LINE__, 0xffffe2e2,	"ffffe2e2", "% 5.x",
-__LINE__, 0x00000021,	"+33", "%+d",
-__LINE__, -0x0020033,	"-131123", "%ld",
-__LINE__, -0x0000001,	"  -1", "%4.ld",
-__LINE__, 0x000000fd,	"000fd", "%3.5x",
-__LINE__, 0x023e4337,	"37634871", "%1d",
-__LINE__, 0x6e823d96,	"6E823D96", "% X",
-__LINE__, 0xfff0e133,	"fff0e133", "%x",
-__LINE__, -0x000decc,	"-57036", "%3d",
-__LINE__, 0x004397b8,	"4429752", "%0d",
-__LINE__, -0x0000023,	"   -35", "%6d",
-__LINE__, 0xffe701ca,	"FFE701CA", "%3X",
-__LINE__, 0x000c0319,	"+787225", "%+.6d",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xfffffe1d,	"FFFFFE1D", "%X",
-__LINE__, 0xfffffb33,	"fffffb33", "%x",
-__LINE__, 0x02b5e30a,	"45474570", "%d",
-__LINE__, 0x000074eb,	"29931", "%03.ld",
-__LINE__, -0x4e42e310,	"-1313006352", "%-0.d",
-__LINE__, -0x000007b,	"-123", "%d",
-__LINE__, 0x00000160,	" 352", "% d",
-__LINE__, -0x16af31ec,	"-380580332", "%#ld",
-__LINE__, -0x000006e,	"-000110", "%07ld",
-__LINE__, 0x232699a0,	"232699a0", "%7.x",
-__LINE__, 0x00f9b8e5,	"+16365797", "%+0d",
-__LINE__, 0x0000000c,	"C", "%X",
-__LINE__, 0xfffffd4f,	"FFFFFD4F", "%X",
-__LINE__, 0xffffe7bb,	"FFFFE7BB", "%.7X",
-__LINE__, -0x0000163,	"-355", "%d",
-__LINE__, 0x00070315,	" 459541", "% #2.d",
-__LINE__, -0x7d5c12a,	"-131449130", "% 6.ld",
-__LINE__, 0xffffffb2,	"FFFFFFB2", "%X",
-__LINE__, -0x0004aad,	"-19117", "%+6.4ld",
-__LINE__, 0x00115586,	"1136006", "%0d",
-__LINE__, -0x0000021,	"-33", "%d",
-__LINE__, 0x093ce01e,	"93ce01e", "% 5x",
-__LINE__, 0x00672135,	"672135", "% x",
-__LINE__, 0x05f4abd5,	"0x5f4abd5", "%+#6.x",
-__LINE__, -0x0448b03,	"-4492035", "%-0.2ld",
-__LINE__, 0x00000000,	"0", "%#x",
-__LINE__, 0x1987217e,	"428286334", "%d",
-__LINE__, 0x000010f6,	"10f6", "%-x",
-__LINE__, 0x0000177a,	"177a", "%1x",
-__LINE__, 0xfffffefd,	"FFFFFEFD", "%7X",
-__LINE__, -0x095cbf8,	"-9817080", "%-5ld",
-__LINE__, 0x0000008a,	"138", "%2.0ld",
-__LINE__, 0xfffe80ad,	"fffe80ad", "%0x",
-__LINE__, -0x1a4c8f7,	"-27576567", "%d",
-__LINE__, 0x00000000,	"0", "%-x",
-__LINE__, 0x0000a82b,	"43051", "%-ld",
-__LINE__, 0x000000eb,	"235", "%2.3ld",
-__LINE__, -0x0002747,	"-10055", "%d",
-__LINE__, 0x00000319,	"0X319", "%#X",
-__LINE__, 0xfffffcfe,	"FFFFFCFE", "% X",
-__LINE__, 0x00050f0e,	"50f0e", "%-1x",
-__LINE__, -0x398e09e,	"-60350622", "%0.7ld",
-__LINE__, 0x00000000,	"  ", "%2.ld",
-__LINE__, 0x00000049,	"00049", "% .5X",
-__LINE__, -0x00000dd,	" -221", "%+#5ld",
-__LINE__, 0xf6db2fac,	"f6db2fac", "%-07x",
-__LINE__, 0x0000004f,	"4F", "% .0X",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xfd07f692,	"fd07f692", "%x",
-__LINE__, 0xdb98bde0,	"db98bde0", "%x",
-__LINE__, 0x00000271,	"0271", "% 3.4x",
-__LINE__, -0x000115a,	"-4442", "%#1.ld",
-__LINE__, 0x0002f5f2,	"194034", "%ld",
-__LINE__, -0x0000152,	"   -338", "%+7ld",
-__LINE__, 0x00059336,	"365366", "%d",
-__LINE__, 0xfffffff6,	"fffffff6", "%-7x",
-__LINE__, 0xfb916c51,	"fb916c51", "%-x",
-__LINE__, 0xffff413d,	"FFFF413D", "%-X",
-__LINE__, 0xf2576910,	"F2576910", "%-4.X",
-__LINE__, 0xfffc7730,	"fffc7730", "%5.x",
-__LINE__, 0x000002e6,	"+742", "%+1d",
-__LINE__, -0x00001bf,	"-447", "%3d",
-__LINE__, 0x000002e1,	"2E1", "%-X",
-__LINE__, 0x00000096,	"150", "%#0ld",
-__LINE__, 0x000002bd,	"701", "%d",
-__LINE__, -0x0053386,	"-340870", "%#d",
-__LINE__, 0xfffdb076,	"FFFDB076", "%X",
-__LINE__, 0x00004dc5,	" +19909", "%+07.ld",
-__LINE__, 0x00000f7a,	" F7A", "%4X",
-__LINE__, 0x02405000,	" 37769216", "% ld",
-__LINE__, 0xfffce68d,	"fffce68d", "%0x",
-__LINE__, -0x35b3af2,	"-56310514", "%-ld",
-__LINE__, -0x0238631,	"-2328113", "%.4d",
-__LINE__, -0x000001e,	"-030", "%.3ld",
-__LINE__, 0xffffffdd,	"FFFFFFDD", "%.4X",
-__LINE__, 0x0013f6ac,	"13f6ac", "%02.x",
-__LINE__, 0xfffffffa,	"fffffffa", "%+07.x",
-__LINE__, -0x000192b,	" -6443", "%6.d",
-__LINE__, 0x0000058b,	"+1419", "%+d",
-__LINE__, 0x00001391,	"5009", "%ld",
-__LINE__, -0x0041a57,	"-268887", "%1ld",
-__LINE__, 0xfffff266,	"0xfffff266", "%+#6.6x",
-__LINE__, 0x0000018b,	"   395", "%6.ld",
-__LINE__, 0x009ae24d,	"+10150477", "%+ld",
-__LINE__, 0x0000007e,	"7E", "%X",
-__LINE__, 0xfffffd53,	"FFFFFD53", "% 0X",
-__LINE__, 0x000002fa,	"2FA", "%-1.3X",
-__LINE__, 0x000000a4,	"164", "%0d",
-__LINE__, 0x00001833,	"6195", "%ld",
-__LINE__, -0x0000001,	"-1", "%d",
-__LINE__, 0xf2fcbd9b,	"F2FCBD9B", "%+0.2X",
-__LINE__, 0x00004a8a,	"4A8A", "%X",
-__LINE__, -0x10695cda,	"-275340506", "%d",
-__LINE__, 0x00000037,	"37", "%X",
-__LINE__, 0x00082d5c,	"82D5C", "%+0.5X",
-__LINE__, 0xfffffe01,	"fffffe01", "% 5.3x",
-__LINE__, 0x000005ea,	"05EA", "% 1.4X",
-__LINE__, 0x0e0b8826,	"e0b8826", "%2x",
-__LINE__, -0x0000161,	"-353", "%+d",
-__LINE__, 0x19e3014a,	"19E3014A", "%+5X",
-__LINE__, 0x00000140,	"140", "%x",
-__LINE__, 0xffff84b9,	"FFFF84B9", "%X",
-__LINE__, -0x0005776,	"-22390", "%+5ld",
-__LINE__, 0x0162ad61,	"162AD61", "% X",
-__LINE__, 0x00002395,	"2395", "%X",
-__LINE__, 0x003702ec,	"3605228", "%5.2d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%7X",
-__LINE__, 0x00001778,	"0x1778", "%#5.x",
-__LINE__, 0xc52bef7f,	"C52BEF7F", "%X",
-__LINE__, 0xfffffec4,	"FFFFFEC4", "%X",
-__LINE__, 0x00000006,	"6", "%X",
-__LINE__, 0x00000000,	"000", "%03.3x",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xffff6c46,	"FFFF6C46", "% 2.2X",
-__LINE__, -0x1506098,	"-22044824", "%01.d",
-__LINE__, 0x03415caf,	"3415caf", "%x",
-__LINE__, -0x00007b4,	"-1972", "%#4.4d",
-__LINE__, -0x00158c9,	"-88265", "%03.4d",
-__LINE__, 0x6947c336,	"1766310710", "%.6d",
-__LINE__, 0x0000017c,	"17C", "% 0X",
-__LINE__, -0x00001b7,	"-439", "% 0ld",
-__LINE__, 0x06a7575a,	"6A7575A", "%-.0X",
-__LINE__, 0x000b3459,	"734297", "%ld",
-__LINE__, -0x395d8dd,	"-60152029", "%ld",
-__LINE__, 0x00036bb3,	"224179", "%-6.d",
-__LINE__, 0xffff14ff,	"FFFF14FF", "%X",
-__LINE__, -0x15910e4f,	"-361827919", "%-0d",
-__LINE__, -0x0000004,	"-4", "%#d",
-__LINE__, 0xf7f7adac,	"F7F7ADAC", "% 3.X",
-__LINE__, 0xffffff74,	"FFFFFF74", "%0X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, -0x000007b,	"-123   ", "%-7.d",
-__LINE__, -0x000002c,	"-44", "%d",
-__LINE__, -0x000002b,	"  -43", "%5d",
-__LINE__, 0x0000ae5f,	"44639", "%d",
-__LINE__, 0x003cbc63,	"3CBC63", "%X",
-__LINE__, 0xfffffffc,	"0XFFFFFFFC", "%#5.7X",
-__LINE__, 0x0003e044,	"3E044", "%X",
-__LINE__, -0x0000c46,	"-3142", "%.1d",
-__LINE__, 0xff18f4bb,	"FF18F4BB", "%0X",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%.1X",
-__LINE__, -0x01c0f27,	"-1838887", "%0d",
-__LINE__, -0x1242901f,	"-306352159", "%.4ld",
-__LINE__, 0x1775c10a,	"393593098", "%6.ld",
-__LINE__, 0x00000001,	"  1", "%03.d",
-__LINE__, 0xfff1fd30,	"0xfff1fd30", "%#x",
-__LINE__, 0x00000191,	"191", "%0.X",
-__LINE__, 0x2e597178,	"777613688", "%2.ld",
-__LINE__, -0x4ef0cf3,	"-82775283", "%+.6ld",
-__LINE__, -0x0000085,	"  -133", "%6.d",
-__LINE__, 0x0000014d,	"333  ", "%-5ld",
-__LINE__, -0xc03bd74,	"-201571700", "%07.6ld",
-__LINE__, -0x000000a,	"-10", "%d",
-__LINE__, 0x01f5e86e,	"32893038", "%#2.ld",
-__LINE__, 0x00000033,	"0X33", "% #X",
-__LINE__, 0x0087c797,	" 8898455", "% 7.d",
-__LINE__, -0x0001205,	"-4613", "%5d",
-__LINE__, 0x00000192,	"    192", "%7.X",
-__LINE__, 0x000e6c00,	"945152", "%6.1ld",
-__LINE__, 0x00018629,	" 99881", "% d",
-__LINE__, -0x04739c6,	"-4667846", "%-01.3ld",
-__LINE__, 0x00001f42,	"8002", "%d",
-__LINE__, 0x00000caf,	"3247", "%d",
-__LINE__, -0x4992e24,	"-77147684", "%#.6d",
-__LINE__, 0x0000001d,	"1d", "%-0x",
-__LINE__, 0x14d79f03,	"349675267", "%0ld",
-__LINE__, 0x00000dd4,	" 03540", "%#6.5ld",
-__LINE__, 0x0005f30e,	"0X5F30E", "%#X",
-__LINE__, 0x00000157,	"157", "%X",
-__LINE__, -0x9281698,	"-153622168", "%d",
-__LINE__, -0x000004a,	"-74", "%d",
-__LINE__, -0x0010c9e,	"-68766", "%-0d",
-__LINE__, 0x00000059,	"00089", "%.5ld",
-__LINE__, -0x06959e3,	"-6904291", "% 4.d",
-__LINE__, 0xfbea12b1,	"0XFBEA12B1", "%+#X",
-__LINE__, 0xffffdfb1,	"FFFFDFB1", "%2.6X",
-__LINE__, 0x0434faac,	"434faac", "%.5x",
-__LINE__, 0xffffffff,	"ffffffff", "% x",
-__LINE__, 0x00000b32,	"B32", "%0X",
-__LINE__, 0x00000047,	"71", "%.1d",
-__LINE__, 0x00070bef,	" 0461807", "% .7d",
-__LINE__, 0x00000038,	"38", "% 0x",
-__LINE__, 0x00000000,	"     0", "%6X",
-__LINE__, 0xfff9c011,	"FFF9C011", "%2X",
-__LINE__, 0xfffffffe,	"fffffffe", "%7x",
-__LINE__, 0xfffffff9,	"FFFFFFF9", "%X",
-__LINE__, -0x016a095,	"-1482901", "%4.0ld",
-__LINE__, -0x000001c,	"-28", "% ld",
-__LINE__, 0xfffd6133,	"0xfffd6133", "%#x",
-__LINE__, 0x000004a4,	"0x4a4", "%#x",
-__LINE__, 0x000003c2,	"0962", "%.4d",
-__LINE__, -0x000323b,	"-12859", "%+#d",
-__LINE__, 0x0f620237,	"F620237", "%X",
-__LINE__, 0x00007863,	"007863", "%.6X",
-__LINE__, 0x0000002c,	" 44", "% #ld",
-__LINE__, 0xfffffff0,	"fffffff0", "%03.6x",
-__LINE__, 0xffff6346,	"FFFF6346", "%1.X",
-__LINE__, 0x00063188,	"63188", "% x",
-__LINE__, 0xfffff91c,	"fffff91c", "%-.3x",
-__LINE__, 0x004cd0b4,	"4CD0B4", "%-2.X",
-__LINE__, 0x06b4d739,	"112514873", "%0.1d",
-__LINE__, -0x0009beb,	"-39915", "%.2d",
-__LINE__, 0x0000831b,	"33563", "%d",
-__LINE__, 0x00000001,	"1", "%X",
-__LINE__, -0x942d76b,	"-155375467", "% #0ld",
-__LINE__, 0xffff2a95,	"FFFF2A95", "%2X",
-__LINE__, 0x00548d5e,	"5541214", "%.3ld",
-__LINE__, 0x0b5e1a01,	"B5E1A01", "% .7X",
-__LINE__, 0xfffffc22,	"fffffc22", "%6x",
-__LINE__, -0x0000dd7,	"-3543", "%-.3ld",
-__LINE__, 0xfffff834,	"FFFFF834", "%X",
-__LINE__, 0x0365f762,	"57014114", "%ld",
-__LINE__, -0x0000003,	"-3", "%d",
-__LINE__, 0x3bd998a3,	"1004116131", "%d",
-__LINE__, 0xfffff6c9,	"FFFFF6C9", "%+X",
-__LINE__, 0xffffded9,	"FFFFDED9", "%-.1X",
-__LINE__, -0x00fbb5a,	"-1031002", "% 1.0d",
-__LINE__, 0xffffffb7,	"ffffffb7", "%6.x",
-__LINE__, 0xff1b8ac3,	"FF1B8AC3", "%-X",
-__LINE__, 0xfffffff2,	"FFFFFFF2", "%00.X",
-__LINE__, -0x000013d,	" -317", "%05.d",
-__LINE__, 0x0000f5e2,	"+62946", "%+0.2ld",
-__LINE__, 0x16ac6358,	"16ac6358", "%x",
-__LINE__, 0xffff8728,	"FFFF8728", "%+X",
-__LINE__, -0x0014a6d,	"-084589", "%0.6ld",
-__LINE__, 0xfc904514,	"FC904514", "%+0X",
-__LINE__, 0x00000004,	"4", "%ld",
-__LINE__, 0xffffffe0,	"ffffffe0", "%+x",
-__LINE__, -0x0a0ffdd,	"-10551261", "%+02d",
-__LINE__, -0x0000bbc,	"-3004", "%+d",
-__LINE__, 0x00000006,	"     +6", "%+7ld",
-__LINE__, 0x17afa6e5,	"397387493", "%ld",
-__LINE__, 0xfffff6bf,	"fffff6bf", "%+04.4x",
-__LINE__, 0x000001dc,	"01dc", "% 02.4x",
-__LINE__, 0x0000000e,	" 14", "% d",
-__LINE__, 0xfffffff9,	"0XFFFFFFF9", "%#4.X",
-__LINE__, 0x0000005d,	"93", "%0d",
-__LINE__, -0x004fa05,	"-0326149", "%.7d",
-__LINE__, -0x0000018,	"-24", "%ld",
-__LINE__, 0xfffff7eb,	"FFFFF7EB", "%X",
-__LINE__, 0x0072b044,	" 7516228", "% .7ld",
-__LINE__, 0xffffffed,	"0xffffffed", "%#x",
-__LINE__, 0x0010364d,	"10364D", "%X",
-__LINE__, 0xfff90469,	"0XFFF90469", "%#X",
-__LINE__, 0x000001b4,	" 436", "% 0d",
-__LINE__, 0x00000000,	"0", "% X",
-__LINE__, 0xfffffff3,	"fffffff3", "%x",
-__LINE__, 0x19335d40,	"19335d40", "%6x",
-__LINE__, 0x00039c24,	"236580", "%ld",
-__LINE__, 0x000021f7,	"8695", "%0.4ld",
-__LINE__, -0x057b406,	"-5747718", "%d",
-__LINE__, -0x017b371,	"-1553265", "%#ld",
-__LINE__, 0x0003e405,	"254981", "%2.d",
-__LINE__, 0x00000001,	"1", "%-.1x",
-__LINE__, 0x000000ae,	"AE", "%.1X",
-__LINE__, 0xffd85825,	"ffd85825", "%-7.x",
-__LINE__, 0xfffad763,	"fffad763", "%x",
-__LINE__, 0x002431d4,	"2372052", "%6.ld",
-__LINE__, 0x00000003,	"000003", "%-05.6d",
-__LINE__, 0xffffffeb,	"0xffffffeb", "%#x",
-__LINE__, 0xff8cf3b0,	"ff8cf3b0", "%x",
-__LINE__, 0xfe88d2ff,	"0xfe88d2ff", "%+#.2x",
-__LINE__, 0xffffff6b,	"ffffff6b", "%6.3x",
-__LINE__, 0xfffffffe,	"fffffffe", "%-x",
-__LINE__, 0xe998945a,	"e998945a", "%2.x",
-__LINE__, 0x03b9c50f,	"3B9C50F", "%+X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%3.7X",
-__LINE__, 0x000024ef,	"24ef", "%+x",
-__LINE__, 0xfffffc04,	"FFFFFC04", "%X",
-__LINE__, 0x0d4bef7c,	" 223080316", "% .1ld",
-__LINE__, -0xc33f3bc,	"-204731324", "%.5ld",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#2X",
-__LINE__, 0x0000e493,	"e493", "%x",
-__LINE__, 0x000001b4,	"1b4", "%x",
-__LINE__, 0xffffffd6,	"0xffffffd6", "% #1x",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, -0x0000f28,	"-3880", "%ld",
-__LINE__, 0x00000277,	"631", "%-1ld",
-__LINE__, 0x00000001,	" 1", "%2x",
-__LINE__, -0x0ff4d2c,	"-16731436", "%#ld",
-__LINE__, 0x0bb80344,	"196608836", "%00ld",
-__LINE__, 0xffffffdc,	"FFFFFFDC", "%X",
-__LINE__, 0x00000484,	"1156", "%ld",
-__LINE__, 0x00000341,	"341", "%-.2x",
-__LINE__, 0x0000ee62,	"ee62", "%x",
-__LINE__, 0xfffffe20,	"fffffe20", "%+x",
-__LINE__, -0x00076eb,	"-30443", "%.2d",
-__LINE__, 0x2c4a7407,	"2c4a7407", "% x",
-__LINE__, 0x00000000,	"   ", "%3.X",
-__LINE__, 0xffffff60,	"ffffff60", "% 4.x",
-__LINE__, 0x000e4cf2,	"+937202", "%+.5ld",
-__LINE__, 0x00000008,	" 00008", "%06.5X",
-__LINE__, 0x0002f612,	"194066", "%d",
-__LINE__, 0xfffffc96,	"fffffc96", "%-3.3x",
-__LINE__, -0x0000001,	"-1", "% ld",
-__LINE__, 0x00000000,	"      ", "% 6.0X",
-__LINE__, 0xfffffff5,	"fffffff5", "%3.x",
-__LINE__, 0x0bfd63a1,	"201155489", "%d",
-__LINE__, -0x1547c214,	"-357024276", "%ld",
-__LINE__, 0x00000004,	"4", "%#0.d",
-__LINE__, -0x000f2f3,	"-62195", "%.2d",
-__LINE__, 0xfff843dd,	"FFF843DD", "%X",
-__LINE__, 0x00966e36,	"9858614", "%.0ld",
-__LINE__, 0x0000782e,	"0X782E", "% #X",
-__LINE__, 0x00bd36c0,	"12400320", "%ld",
-__LINE__, 0x00000000,	"00", "% .2X",
-__LINE__, 0x00000000,	"0", "%1X",
-__LINE__, 0x0003f416,	"3f416 ", "%-6.x",
-__LINE__, -0x00b74bd,	"-750781", "% ld",
-__LINE__, 0x0000138a,	"138a", "% x",
-__LINE__, 0x024df7f0,	"24DF7F0", "% 0.6X",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%X",
-__LINE__, -0x0003284,	"-12932 ", "%-07.ld",
-__LINE__, 0x000094d3,	"94d3", "%x",
-__LINE__, 0x000000bf,	"bf", "%.2x",
-__LINE__, 0x00000000,	"00000", "%-1.5X",
-__LINE__, -0x04899b8,	"-4757944", "%d",
-__LINE__, 0x2b51bf20,	"+726777632", "%+d",
-__LINE__, -0x000000d,	"-13", "%.2d",
-__LINE__, 0x04f78fbd,	"4F78FBD", "% 7.X",
-__LINE__, 0x00011684,	"71300", "%5.d",
-__LINE__, 0x0000539d,	"21405", "%0d",
-__LINE__, 0x00000008,	"000008", "%-3.6X",
-__LINE__, 0xfc7a2cdc,	"fc7a2cdc", "%2.3x",
-__LINE__, 0xffc21da1,	"ffc21da1", "%x",
-__LINE__, 0x00000273,	"273", "%x",
-__LINE__, 0x00000000,	"0", "%#X",
-__LINE__, -0x31cd6b9,	"-52221625", "% d",
-__LINE__, 0xfffffff8,	"FFFFFFF8", "%.0X",
-__LINE__, 0x00000002,	"2", "%#ld",
-__LINE__, 0x00e8922c,	"15241772", "%d",
-__LINE__, 0xfeb19ea7,	"FEB19EA7", "%0.1X",
-__LINE__, 0x00003931,	"014641", "%06ld",
-__LINE__, 0x00000015,	"0X00015", "%#.5X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%1.X",
-__LINE__, 0xfff17103,	"0XFFF17103", "% #X",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%+X",
-__LINE__, 0x00000002,	"00002", "%.5x",
-__LINE__, 0x00001617,	"   5655", "% 7.d",
-__LINE__, -0x0000010,	"-000016", "%00.6d",
-__LINE__, 0x000000b0,	"B0", "% X",
-__LINE__, 0xfc9362b2,	"FC9362B2", "%-X",
-__LINE__, 0xfc3d8276,	"fc3d8276", "% 1x",
-__LINE__, 0x00001405,	"5125", "%#d",
-__LINE__, 0x02250183,	" 35979651", "% ld",
-__LINE__, 0xffc9b007,	"ffc9b007", "% 4.x",
-__LINE__, 0x00000311,	"785", "%0d",
-__LINE__, 0x0004d273,	" 316019", "% d",
-__LINE__, 0x00000001,	"1", "%1.x",
-__LINE__, 0xffff240f,	"FFFF240F", "%4.X",
-__LINE__, 0x0049cfda,	"+4837338", "%+ld",
-__LINE__, 0x012f6dd5,	"12F6DD5", "% 6.2X",
-__LINE__, 0x00000002,	"0x2", "%#2.0x",
-__LINE__, 0xfffd834a,	"FFFD834A", "%.6X",
-__LINE__, 0xfe2a40f8,	"0XFE2A40F8", "%#X",
-__LINE__, 0xffffffeb,	"ffffffeb", "%x",
-__LINE__, -0x00ac5cb,	"-705995", "%d",
-__LINE__, -0x3021108c,	"-807473292", "% .4d",
-__LINE__, -0x0000035,	"-53", "%-ld",
-__LINE__, -0x1a36475,	"-27485301", "% d",
-__LINE__, -0x0000011,	"-17", "%d",
-__LINE__, 0x000001a3,	"000419", "%.6ld",
-__LINE__, 0x0030a0a8,	"3186856", "%.5ld",
-__LINE__, 0x00000019,	"25", "%d",
-__LINE__, 0xf32deac1,	"F32DEAC1", "%06.2X",
-__LINE__, -0x0000004,	" -00004", "%7.5ld",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, 0x0006bf19,	"442137", "%#0.d",
-__LINE__, 0x566f6c44,	"1450142788", "%1.6d",
-__LINE__, 0xfffffc10,	"fffffc10", "%.2x",
-__LINE__, -0x000e04d,	"-57421", "%+0d",
-__LINE__, 0x00000000,	"0000000", "%+.7X",
-__LINE__, 0x00b5c74d,	" 11913037", "% ld",
-__LINE__, -0x028dfe2,	"-2678754", "%05.1d",
-__LINE__, 0xfffffee0,	"fffffee0", "%0x",
-__LINE__, -0x030c077,	"-3194999", "%-.6d",
-__LINE__, 0x00055ca1,	"055ca1", "%-.6x",
-__LINE__, 0x00000000,	"       ", "%7.X",
-__LINE__, 0xfffffe3b,	"FFFFFE3B", "%X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "% 3X",
-__LINE__, 0x00000857,	"2135", "%-#1.d",
-__LINE__, -0x00546a2,	"-345762", "%0.5d",
-__LINE__, 0x0000000b,	"0xb   ", "%-#6x",
-__LINE__, 0x00000d2b,	"d2b ", "%-4.0x",
-__LINE__, 0x0ae02b9e,	"AE02B9E", "%X",
-__LINE__, 0xfffffa7b,	"fffffa7b", "%-2.x",
-__LINE__, 0x00000001,	"1", "%X",
-__LINE__, 0x000006ad,	"01709", "%05.5ld",
-__LINE__, -0x0000102,	"-258", "%-0.ld",
-__LINE__, 0x00000000,	"0", "%.1X",
-__LINE__, -0x01daa95,	"-1944213", "%-1ld",
-__LINE__, 0x02b99040,	"2B99040", "%2.X",
-__LINE__, 0x1b3d5621,	"1B3D5621", "%X",
-__LINE__, 0x0312d16b,	"51564907", "%-1.7ld",
-__LINE__, 0x000aa76c,	" 698220", "% 2d",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, 0xfff8a4ec,	"FFF8A4EC", "%-X",
-__LINE__, 0xffffe06d,	"ffffe06d", "%x",
-__LINE__, 0x00000003,	"3", "% x",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xd3e244dd,	"D3E244DD", "%+5X",
-__LINE__, 0x000028b3,	" 28b3", "% 5.x",
-__LINE__, 0x0001aceb,	"109803", "%6d",
-__LINE__, 0xfffbc5ca,	"0xfffbc5ca", "%-#5x",
-__LINE__, 0x00000097,	"    151", "% 7ld",
-__LINE__, 0x00001fcc,	"+8140", "%+d",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, -0x00052a9,	"-21161", "%ld",
-__LINE__, 0xfffffc76,	"FFFFFC76", "%.1X",
-__LINE__, -0x2acb012,	"-44871698", "%0.1ld",
-__LINE__, 0xffffff81,	"ffffff81", "%x",
-__LINE__, -0x0018394,	"-99220", "%-ld",
-__LINE__, 0x0000001b,	"1B", "%X",
-__LINE__, 0x00000033,	"51", "%1d",
-__LINE__, 0xffec37e5,	"FFEC37E5", "%-1X",
-__LINE__, -0x000000a,	"  -10", "%#5.d",
-__LINE__, -0x0000412,	"-1042", "%ld",
-__LINE__, 0x000cd0b1,	"cd0b1  ", "%-7.5x",
-__LINE__, 0x0b445370,	"B445370", "%+2.0X",
-__LINE__, 0xfffffff3,	"0XFFFFFFF3", "%-#X",
-__LINE__, 0xffff9f33,	"FFFF9F33", "%5.X",
-__LINE__, 0x00010a1e,	"10A1E", "%-2X",
-__LINE__, -0xede156f,	"-249435503", "% 7.1ld",
-__LINE__, 0xfc6d63aa,	"fc6d63aa", "% .6x",
-__LINE__, 0x0000311c,	" 12572", "% ld",
-__LINE__, 0x00001f8a,	"8074", "%00.d",
-__LINE__, 0x00000199,	"199", "%-X",
-__LINE__, 0xfffffc60,	"FFFFFC60", "%+3X",
-__LINE__, -0x000022c,	"-556", "%+0ld",
-__LINE__, 0x021d8407,	"35488775", "%-#.7ld",
-__LINE__, 0x0000020f,	"527", "%d",
-__LINE__, -0x000064b,	"-1611", "%#ld",
-__LINE__, -0x0c15aef,	"-12671727", "%d",
-__LINE__, -0x1f1a6881,	"-521824385", "%ld",
-__LINE__, 0xffffc115,	"ffffc115", "% x",
-__LINE__, 0x00000017,	" 23", "% #ld",
-__LINE__, 0x00000dc1,	"DC1 ", "%-4X",
-__LINE__, 0x000002ca,	"2CA", "%X",
-__LINE__, 0x000f052c,	" 984364", "%7.d",
-__LINE__, 0x0000005a,	"0090", "%0.4d",
-__LINE__, -0x001e463,	"-124003", "% 4.ld",
-__LINE__, 0x00000001,	"0000001", "%+.7X",
-__LINE__, 0x00000bfb,	"0000bfb", "%5.7x",
-__LINE__, 0x0002484b,	"149579", "%#1d",
-__LINE__, 0x0043ba18,	"4438552", "%-ld",
-__LINE__, 0x000078f8,	"0X78F8", "%#X",
-__LINE__, 0x00000001,	"   1", "%4d",
-__LINE__, 0x0cedaeed,	"CEDAEED", "%X",
-__LINE__, 0x00000003,	"+3", "%+ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%7.4X",
-__LINE__, 0x00000169,	"361", "%ld",
-__LINE__, 0x00003c7a,	"+15482", "%+ld",
-__LINE__, -0x0159d93,	"-1416595", "% 0.0d",
-__LINE__, 0x0000775c,	"+30556", "%+3.d",
-__LINE__, 0x10284768,	"+271075176", "%+0.0ld",
-__LINE__, -0xf8b610e,	"-260792590", "%0d",
-__LINE__, 0xfdd8d369,	"fdd8d369", "%-.3x",
-__LINE__, 0x000c9495,	"+824469", "%+ld",
-__LINE__, -0x000003f,	"   -063", "%7.3d",
-__LINE__, -0x000073b,	"-1851", "%+03.ld",
-__LINE__, 0xfffe4e23,	"0xfffe4e23", "%#.5x",
-__LINE__, 0x0081788c,	"81788c", "%5x",
-__LINE__, -0x015f888,	"-1439880", "%+1d",
-__LINE__, -0x31d64b4,	"-52257972", "%0.2d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%6.5X",
-__LINE__, -0x0000072,	"-114", "%+.1d",
-__LINE__, -0x00000e1,	"-225", "%ld",
-__LINE__, 0x000006a8,	"0x6a8", "%+#x",
-__LINE__, 0xfffe673a,	"fffe673a", "%01.x",
-__LINE__, 0xfff2ee0d,	"FFF2EE0D", "%-X",
-__LINE__, 0x0290320a,	"43004426", "%0ld",
-__LINE__, -0xeb7a832,	"-246917170", "% ld",
-__LINE__, 0x02ae9265,	"2ae9265", "%1.x",
-__LINE__, 0xffffffd2,	"ffffffd2", "%+2.x",
-__LINE__, 0x00e6e858,	"0xe6e858", "%#0.x",
-__LINE__, 0x00000c4a,	"+3146", "%+3.1d",
-__LINE__, -0x6943c1a,	"-110378010", "% 0ld",
-__LINE__, 0x0167b119,	"167b119", "%0x",
-__LINE__, 0xfffffffe,	"fffffffe", "%+x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, 0x000b861e,	"755230", "%ld",
-__LINE__, 0x0000015b,	"347", "%-#ld",
-__LINE__, 0xfffffffa,	"0XFFFFFFFA", "%#X",
-__LINE__, 0x000de9e5,	"911845", "%d",
-__LINE__, 0x00000001,	"01", "%.2d",
-__LINE__, 0x000007a5,	"1957", "%0d",
-__LINE__, 0x0000000f,	"f", "%x",
-__LINE__, 0x00c38cbf,	" 12815551", "% .2d",
-__LINE__, -0x7bd1b6e,	"-129833838", "% d",
-__LINE__, -0x000013c,	"-316", "%0d",
-__LINE__, 0x00001aad,	"1AAD", "%-0X",
-__LINE__, 0x0034f903,	"3471619", "%00d",
-__LINE__, 0xff925717,	"ff925717", "%4x",
-__LINE__, 0x00000002,	"02", "%.2d",
-__LINE__, 0x00000f34,	"F34", "%+X",
-__LINE__, 0xffffeefe,	"FFFFEEFE", "%X",
-__LINE__, 0xfffeecb4,	"FFFEECB4", "% 2.X",
-__LINE__, 0x00034421,	"214049", "%0ld",
-__LINE__, 0x00000000,	"     0", "%+6X",
-__LINE__, -0x0000062,	"-98", "%-#2d",
-__LINE__, -0x0000557,	"-1367", "%-4.4d",
-__LINE__, 0xffffe17c,	"FFFFE17C", "%X",
-__LINE__, 0x00000097,	"00097", "%.5X",
-__LINE__, 0xfffcb278,	"FFFCB278", "%0.7X",
-__LINE__, -0x0000001,	"-0001  ", "%-7.4d",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x000002c4,	"708", "%d",
-__LINE__, 0x04946f45,	"4946F45", "%-2.X",
-__LINE__, 0x000000ff,	"00ff", "% 2.4x",
-__LINE__, 0x00073307,	"471815", "%3ld",
-__LINE__, 0x0085b7b6,	"+8763318", "%+ld",
-__LINE__, -0x0000002,	"-2", "%1ld",
-__LINE__, -0x0000001,	"-1", "%-2d",
-__LINE__, -0x00000b5,	"   -181", "%7ld",
-__LINE__, -0x0412486,	"-4269190", "%+2.1ld",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, 0x0000006d,	"6d", "%x",
-__LINE__, 0x000000da,	"218", "%-.3ld",
-__LINE__, 0xfffffcfe,	"fffffcfe", "%x",
-__LINE__, 0x652e60c7,	"652E60C7", "%7.7X",
-__LINE__, 0x00000035,	" 53", "% #2d",
-__LINE__, 0x000000fc,	"FC", "%-X",
-__LINE__, 0x00000019,	" 25", "% ld",
-__LINE__, 0xfffffcf4,	"fffffcf4", "%6x",
-__LINE__, 0xffffff41,	"ffffff41", "%x",
-__LINE__, 0x00000034,	" 52", "%3.ld",
-__LINE__, 0xffffffb2,	"ffffffb2", "%-x",
-__LINE__, -0x6dc43e7c,	"-1841577596", "% .2ld",
-__LINE__, 0x00000004,	"4", "%d",
-__LINE__, -0x000023b,	"-571", "%ld",
-__LINE__, -0x000004d,	"-77", "%ld",
-__LINE__, 0x0000e3ba,	"58298", "%.0ld",
-__LINE__, 0xfffffff2,	"fffffff2", "%0.0x",
-__LINE__, -0x0000020,	"-32", "%ld",
-__LINE__, 0xffffb33e,	"0XFFFFB33E", "%-#X",
-__LINE__, 0x00000000,	"    ", "% 4.x",
-__LINE__, 0xffd96f92,	"FFD96F92", "%X",
-__LINE__, 0x0000002e,	" 46", "% 0ld",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, -0x5008ba3,	"-83921827", "%+d",
-__LINE__, 0xfdc1df3d,	"FDC1DF3D", "%0X",
-__LINE__, 0xfc7410e5,	"fc7410e5", "%7x",
-__LINE__, 0xfffffffa,	"FFFFFFFA", "% 6.X",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, -0x040fd4e,	"-4259150", "% 05.d",
-__LINE__, 0x0000003b,	" 59", "%3.2d",
-__LINE__, 0xff776dd8,	"ff776dd8", "%x",
-__LINE__, 0x0000055b,	"+1371", "%+#2d",
-__LINE__, 0x00004841,	"4841", "%.1x",
-__LINE__, 0x0229d710,	"36296464", "%-.2ld",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xfffe8376,	"fffe8376", "%0x",
-__LINE__, 0x000a7b83,	"a7b83", "%x",
-__LINE__, 0x0000000d,	"    013", "%#7.3d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%5.0X",
-__LINE__, 0x00000704,	"  0x704", "%#7.0x",
-__LINE__, 0xfff970b9,	"FFF970B9", "%.1X",
-__LINE__, -0x000b60a,	"-46602", "%+d",
-__LINE__, 0x00000000,	" 00000", "%6.5x",
-__LINE__, 0x00000003,	"3", "%X",
-__LINE__, 0x0000c14b,	"c14b", "%0x",
-__LINE__, 0x066d7860,	"107837536", "%-d",
-__LINE__, 0x00000013,	"  13", "%4.x",
-__LINE__, 0xfff96f18,	"FFF96F18", "%4X",
-__LINE__, 0xffffff30,	"FFFFFF30", "%X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "% .7X",
-__LINE__, -0x72a9e985,	"-1923737989", "%2.d",
-__LINE__, 0x00000002,	"0x2", "%#x",
-__LINE__, 0x0000050e,	"50e", "%2.3x",
-__LINE__, 0x0000605c,	"24668", "%4.1d",
-__LINE__, 0xffffff3e,	"ffffff3e", "%x",
-__LINE__, -0x0000010,	"-16", "%-2d",
-__LINE__, 0x000061aa,	"61AA", "%X",
-__LINE__, 0x000c2ec3,	"C2EC3", "%0X",
-__LINE__, -0x0000001,	"-1", "%-0d",
-__LINE__, 0x00130e17,	"+1248791", "%+.6ld",
-__LINE__, 0x000000ef,	"EF", "%-X",
-__LINE__, -0x0000001,	"   -1", "%+5ld",
-__LINE__, 0x0000989d,	"39069", "%d",
-__LINE__, 0x00000000,	"0", "%-x",
-__LINE__, 0x00000417,	"417", "%X",
-__LINE__, 0x00005e86,	"5E86", "%+X",
-__LINE__, -0x0007c08,	"-31752", "%ld",
-__LINE__, 0x00da8e0f,	"DA8E0F", "%2.2X",
-__LINE__, -0x3ee095ec,	"-1054905836", "% 0d",
-__LINE__, 0xfffdb5a3,	"fffdb5a3", "%x",
-__LINE__, 0xffffff83,	"FFFFFF83", "%X",
-__LINE__, 0xfff8efd7,	"0xfff8efd7", "%#x",
-__LINE__, 0x00000020,	" 32", "% d",
-__LINE__, 0xfff7c002,	"fff7c002", "%.7x",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x00000000,	"  000", "%05.3X",
-__LINE__, 0xfff190ee,	"FFF190EE", "%X",
-__LINE__, 0x00000a6c,	"  2668", "%#6.ld",
-__LINE__, 0x00037024,	"37024", "%x",
-__LINE__, 0xfffec37f,	"FFFEC37F", "%X",
-__LINE__, 0x007ee9bb,	"8317371", "%#0.ld",
-__LINE__, 0x00000122,	"290", "%ld",
-__LINE__, -0x0013b5f,	"-80735", "%ld",
-__LINE__, 0xfffffff6,	"FFFFFFF6", "%X",
-__LINE__, -0x0000c16,	"-0003094", "%-00.7d",
-__LINE__, -0x00010ed,	"-4333", "%ld",
-__LINE__, 0x00000007,	" 0X007", "%#6.3X",
-__LINE__, 0x0053781e,	" 5470238", "% 2d",
-__LINE__, 0xffff03e9,	"0XFFFF03E9", "%+#7.3X",
-__LINE__, 0xfffffdc2,	"0xfffffdc2", "% #4.x",
-__LINE__, -0x00018e1,	"-6369", "%d",
-__LINE__, 0xf3a4abc6,	"F3A4ABC6", "%-.2X",
-__LINE__, 0xfff64a27,	"FFF64A27", "%7.7X",
-__LINE__, 0x00195ae5,	"195AE5", "%+03.X",
-__LINE__, 0xfff8849a,	"fff8849a", "%.1x",
-__LINE__, -0x001b045,	"-110661", "%+ld",
-__LINE__, 0x01e8a106,	"32022790", "%7.ld",
-__LINE__, 0x0008ee94,	"8EE94", "%X",
-__LINE__, 0xfffcdabc,	"FFFCDABC", "%X",
-__LINE__, 0xfda75cd2,	"fda75cd2", "%x",
-__LINE__, 0x00fd505a,	"fd505a", "%x",
-__LINE__, 0x00003748,	"3748", "%+x",
-__LINE__, 0xffffffe5,	"ffffffe5", "% 3.6x",
-__LINE__, -0x1d1c4045,	"-488390725", "%d",
-__LINE__, 0xfffffff9,	"0xfffffff9", "%#x",
-__LINE__, -0x0000001,	"-1", "%-#ld",
-__LINE__, 0x00000191,	"191", "%X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%-X",
-__LINE__, -0x0000006,	"-6", "%ld",
-__LINE__, 0x00000033,	"  33", "% 4x",
-__LINE__, -0x0159a14,	"-1415700", "% ld",
-__LINE__, 0x000001c3,	"00001c3", "%07x",
-__LINE__, 0xffffe9e2,	"ffffe9e2", "%-x",
-__LINE__, 0x5b19abd9,	"0x5b19abd9", "%-#x",
-__LINE__, 0xffff1bae,	"0xffff1bae", "%#x",
-__LINE__, 0x00000001,	"+1", "%+d",
-__LINE__, 0x006a23c7,	"6A23C7", "%2.X",
-__LINE__, 0x000008a4,	" 8a4", "% 4.1x",
-__LINE__, 0xfffffcd9,	"fffffcd9", "%.1x",
-__LINE__, 0x0000121b,	"121B", "%X",
-__LINE__, 0x001231aa,	"1192362", "%7.d",
-__LINE__, -0x008026d,	"-524909", "%4.2d",
-__LINE__, 0x192ea594,	"422487444", "%ld",
-__LINE__, 0x0001a800,	"108544", "%0d",
-__LINE__, 0x000062f1,	"62f1", "%.4x",
-__LINE__, 0xff8b39b0,	"ff8b39b0", "% x",
-__LINE__, 0x00000001,	"0x1", "%+#x",
-__LINE__, 0x0000144a,	"5194", "%ld",
-__LINE__, 0x00002599,	"9625", "%d",
-__LINE__, 0xffa0a2ef,	"ffa0a2ef", "%0x",
-__LINE__, 0xff6712e1,	"FF6712E1", "%0X",
-__LINE__, 0x0007ebb3,	"519091", "%1ld",
-__LINE__, 0x0000000f,	"15  ", "%-4.ld",
-__LINE__, -0x0000096,	"-150", "%2.ld",
-__LINE__, 0x0000004f,	"4F", "%.2X",
-__LINE__, 0xfffffc29,	"fffffc29", "%-4.x",
-__LINE__, 0x00000019,	"19", "%x",
-__LINE__, 0x00000c4e,	"c4e", "%x",
-__LINE__, 0x0000006b,	" 0006B", "%6.5X",
-__LINE__, 0x00c8d2c6,	"c8d2c6", "%.0x",
-__LINE__, -0x256fb8de,	"-628078814", "%ld",
-__LINE__, 0x4f51fcf4,	"4F51FCF4", "%+X",
-__LINE__, 0x000f000e,	"983054", "%1.ld",
-__LINE__, 0xfffff03f,	"fffff03f", "%x",
-__LINE__, 0x0000001d,	"   1D", "%05.X",
-__LINE__, 0x0072ea14,	"72ea14", "%x",
-__LINE__, -0xc6098b9,	"-207657145", "%-7d",
-__LINE__, 0x00000a76,	"2678", "%3ld",
-__LINE__, 0xfff84db3,	"FFF84DB3", "%X",
-__LINE__, 0x0fb52870,	"fb52870", "%+x",
-__LINE__, 0x08bc170a,	"0x8bc170a", "%#x",
-__LINE__, 0xfffeeb00,	"fffeeb00", "%0.5x",
-__LINE__, 0x000ece95,	"970389", "%d",
-__LINE__, 0x00000000,	"0", "%0X",
-__LINE__, 0x07f98e8a,	"7f98e8a", "% x",
-__LINE__, 0x000499eb,	" 499eb", "% 6.x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%-X",
-__LINE__, 0x0aa45e86,	"178544262", "%#.2d",
-__LINE__, 0xff73387d,	"FF73387D", "%03.X",
-__LINE__, 0xfffffb51,	"FFFFFB51", "%.3X",
-__LINE__, 0xffffffdc,	"ffffffdc", "%6.x",
-__LINE__, 0xffffffed,	"FFFFFFED", "%-X",
-__LINE__, 0x0001c4c2,	"1c4c2", "%0.3x",
-__LINE__, -0x0000001,	"-0000001", "%-#.7d",
-__LINE__, 0x00000007,	"7", "%0.x",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0xffffd000,	"ffffd000", "%4.3x",
-__LINE__, 0x00000030,	"48", "%2.d",
-__LINE__, -0x6c121ce,	"-113320398", "%.5ld",
-__LINE__, 0x000001ed,	"1ED", "% 3.X",
-__LINE__, 0xfffff0f3,	"FFFFF0F3", "%+.6X",
-__LINE__, 0xffffffec,	"ffffffec", "%x",
-__LINE__, 0x002d5ab8,	"0x2d5ab8", "%-#x",
-__LINE__, 0x0026acff,	"2534655", "%0ld",
-__LINE__, 0x01d90cd7,	"+31001815", "%+.2ld",
-__LINE__, -0x1f7abc0,	"-33008576", "%7.6d",
-__LINE__, 0xfc5babcc,	"fc5babcc", "%x",
-__LINE__, -0x9b74892,	"-163006610", "% .6d",
-__LINE__, 0x03931d84,	"59972996", "%0.d",
-__LINE__, 0x07d261ce,	"131228110", "%#ld",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0x00000002,	"2", "%+X",
-__LINE__, -0x0000604,	"-1540", "%+d",
-__LINE__, 0x00000000,	"       ", "%7.x",
-__LINE__, 0x00000001,	"1", "%.0X",
-__LINE__, -0x0005a8e,	"-23182", "% d",
-__LINE__, 0x03fb2730,	"3fb2730", "%7.x",
-__LINE__, 0xffffff03,	"ffffff03", "%x",
-__LINE__, 0x00000000,	"   ", "%-#3.d",
-__LINE__, 0x04025a4b,	"0X4025A4B", "%+#X",
-__LINE__, -0x0000001,	"  -1", "%4.d",
-__LINE__, 0xfffe00a3,	"FFFE00A3", "%+X",
-__LINE__, -0x1b26e3c8,	"-455533512", "% ld",
-__LINE__, 0x000017e5,	"6117", "%d",
-__LINE__, -0x0e4f3b6,	"-15004598", "%0ld",
-__LINE__, 0x00000034,	"52", "%ld",
-__LINE__, 0x0000024c,	" 24C", "%4X",
-__LINE__, 0xfffedf65,	"FFFEDF65", "%-0X",
-__LINE__, -0x000ff1f,	"-65311", "%+#d",
-__LINE__, 0x00000007,	"      7", "%7.x",
-__LINE__, 0x018656ae,	"18656ae", "%3.7x",
-__LINE__, -0x0000004,	"-4", "%d",
-__LINE__, 0x7081292d,	"1887512877", "%d",
-__LINE__, 0x87d3e48c,	"87d3e48c", "%-x",
-__LINE__, 0xf99c516e,	"0xf99c516e", "% #7.4x",
-__LINE__, 0xfffffffa,	"FFFFFFFA", "%-1X",
-__LINE__, -0x000001d,	"-29", "%#ld",
-__LINE__, -0x0000001,	"-1", "%+ld",
-__LINE__, 0x28ab3350,	" 682308432", "% 1d",
-__LINE__, -0x0000006,	"-6", "%ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%.5X",
-__LINE__, -0x0000007,	"-7", "%#d",
-__LINE__, -0x0000328,	"  -808", "%6.ld",
-__LINE__, -0x29386f00,	"-691564288", "%.3d",
-__LINE__, -0x059f38a,	"-5895050", "%.4ld",
-__LINE__, 0xfffff888,	"FFFFF888", "%3X",
-__LINE__, 0xffffffdf,	"ffffffdf", "%0.0x",
-__LINE__, -0xb4fc354,	"-189776724", "%2d",
-__LINE__, 0x00058c07,	"363527", "%1.d",
-__LINE__, 0x0a256162,	"a256162", "%x",
-__LINE__, -0x05c87b0,	"-6064048", "%0ld",
-__LINE__, 0xfffffda1,	"fffffda1", "%x",
-__LINE__, 0x000034b7,	"13495", "%d",
-__LINE__, -0x6d1a8918,	"-1830455576", "%.1d",
-__LINE__, 0x00022290,	"139920", "%05ld",
-__LINE__, 0x00000000,	"0", "%-x",
-__LINE__, -0x1f8eafce,	"-529444814", "%4.d",
-__LINE__, -0x7bf32808,	"-2079533064", "% ld",
-__LINE__, 0x0000023c,	"23c", "% x",
-__LINE__, 0x00000039,	"39", "%X",
-__LINE__, -0x000556d,	"-21869", "%ld",
-__LINE__, -0x00000ca,	"-202", "%ld",
-__LINE__, 0x00002e28,	"11816", "%-d",
-__LINE__, 0x00000011,	"17", "%-ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%-X",
-__LINE__, 0xfffdd67f,	"0XFFFDD67F", "%#X",
-__LINE__, -0x000003d,	"-61", "%d",
-__LINE__, 0x0000bfce,	"0XBFCE", "%-#5.2X",
-__LINE__, 0xfffffffc,	"fffffffc", "%x",
-__LINE__, -0x00aea17,	"-715287", "%.5d",
-__LINE__, -0x02fce89,	"-3133065", "%0d",
-__LINE__, 0x007f6ed1,	"7F6ED1", "%6X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, -0x0002761,	"-10081", "%#6.2d",
-__LINE__, 0x003be8d8,	"3BE8D8", "%-X",
-__LINE__, 0x00000901,	"  2305", "%6.d",
-__LINE__, 0x00049916,	"0301334", "%3.7ld",
-__LINE__, 0x0678ffea,	"0X678FFEA", "%#4X",
-__LINE__, 0xffffffff,	"ffffffff", "%+.0x",
-__LINE__, -0x31d2ec61,	"-835906657", "%.0d",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%0X",
-__LINE__, -0x0015588,	"-87432", "%d",
-__LINE__, 0xffffff3e,	"ffffff3e", "%.4x",
-__LINE__, 0x0000000a,	"10", "%d",
-__LINE__, -0x0000003,	"-3", "%2.1ld",
-__LINE__, -0x000d29a,	"-53914", "%ld",
-__LINE__, -0x04ccbe0,	"-5032928", "%2.2ld",
-__LINE__, 0x0357c2a5,	"357c2a5", "% 7.x",
-__LINE__, 0x00000009,	" 9", "% 1.ld",
-__LINE__, -0x005908d,	"-364685", "%0d",
-__LINE__, -0x0000de6,	"-3558", "%0ld",
-__LINE__, 0x2d395e6b,	"+758734443", "%+6d",
-__LINE__, 0x001aba58,	"1ABA58", "% X",
-__LINE__, 0x0ceba5ab,	"0XCEBA5AB", "%#.1X",
-__LINE__, -0x01a8575,	"-1738101", "% 2ld",
-__LINE__, 0x0000000d,	"13", "%#ld",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x4b856407,	"4b856407", "%5x",
-__LINE__, 0x006f333c,	"6F333C", "%-X",
-__LINE__, 0x000000d0,	"d0", "%x",
-__LINE__, 0x2ecf0d4e,	"2ecf0d4e", "%0x",
-__LINE__, -0x0000188,	"-0000392", "%#1.7ld",
-__LINE__, -0x0000037,	"-55", "%d",
-__LINE__, 0xfffffff1,	"FFFFFFF1", "% .1X",
-__LINE__, 0x00000001,	"0x1", "%#3x",
-__LINE__, 0x000005ed,	"5ED", "%3X",
-__LINE__, 0x031183a3,	"31183A3", "%X",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, -0x0018695,	"-99989", "%-0.5ld",
-__LINE__, -0x0000001,	"-01", "%0.2ld",
-__LINE__, 0x00007822,	"7822", "%+x",
-__LINE__, 0x00000000,	"0", "% x",
-__LINE__, 0xfda2461a,	"FDA2461A", "%X",
-__LINE__, 0x065c50ef,	"106713327", "%2.ld",
-__LINE__, 0x00000a81,	"a81", "% 0x",
-__LINE__, -0x000022e,	"-558", "%.0ld",
-__LINE__, 0x00013d2f,	"81199", "%.2ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%+X",
-__LINE__, 0x000015f9,	"5625", "%04.ld",
-__LINE__, 0x0ab575a2,	"179664290", "%0d",
-__LINE__, 0x0024d07f,	"0X24D07F", "%#X",
-__LINE__, 0x07ee35e1,	"7EE35E1", "%+X",
-__LINE__, -0x00c114c,	"-790860", "%#ld",
-__LINE__, 0x00003be3,	"  15331", "%07.d",
-__LINE__, 0xfff87570,	"FFF87570", "%4.0X",
-__LINE__, -0x14eab419,	"-350925849", "%-ld",
-__LINE__, -0x000001b,	"-27", "%ld",
-__LINE__, 0x167ce2ea,	"0x167ce2ea", "%#0.x",
-__LINE__, -0x00009bc,	"-002492", "% 3.6d",
-__LINE__, 0xfffffdb9,	"0XFFFFFDB9", "%#7.X",
-__LINE__, 0x008b2b9d,	"8B2B9D", "% X",
-__LINE__, 0x000cfec3,	"CFEC3", "% 05X",
-__LINE__, 0x05970be6,	"5970be6", "%x",
-__LINE__, 0x00002780,	"010112", "%2.6d",
-__LINE__, 0x00000005,	"+5", "%+d",
-__LINE__, 0xfffffffb,	"0xfffffffb", "%#3.x",
-__LINE__, 0x00000001,	"1    ", "%-#5.ld",
-__LINE__, -0x0000017,	"-23", "%ld",
-__LINE__, -0x023b943,	"-2341187", "%d",
-__LINE__, 0x0000000d,	"13", "%ld",
-__LINE__, 0x00025a03,	"25a03", "% .5x",
-__LINE__, 0x3e1ebe24,	"3e1ebe24", "% x",
-__LINE__, 0x0000013a,	"0x13a", "%#5.0x",
-__LINE__, 0xfff6f5b3,	"FFF6F5B3", "%4.X",
-__LINE__, -0x0000a8a,	"-2698", "%.3d",
-__LINE__, 0x0009dd5f,	"9dd5f", "%x",
-__LINE__, 0x000003c7,	" 3C7", "%04.2X",
-__LINE__, 0x1bcfa2f2,	"1bcfa2f2", "%+1.x",
-__LINE__, 0x0001b4f4,	"1b4f4", "%+1.x",
-__LINE__, 0x1bc19a90,	"465672848", "%#d",
-__LINE__, 0xffffffff,	"ffffffff", "%+06x",
-__LINE__, -0x0000a88,	"-2696", "%3.d",
-__LINE__, 0x00084a19,	"84A19", "%-X",
-__LINE__, 0xffe1fc8f,	"FFE1FC8F", "%0.1X",
-__LINE__, -0x0000a3a,	"-2618", "%5d",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, -0x5c6183d,	"-96868413", "%+ld",
-__LINE__, -0x0000001,	"-1", "%-d",
-__LINE__, 0x0000faa8,	"64168", "%05.d",
-__LINE__, 0x003913ef,	"3740655", "%ld",
-__LINE__, 0x0dde330a,	"232665866", "%#ld",
-__LINE__, 0xfcfb1a7b,	"FCFB1A7B", "%+X",
-__LINE__, 0x07b1a81f,	" 129083423", "% 0d",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0x00000070,	"  112", "%5ld",
-__LINE__, 0xffff74d9,	"ffff74d9", "%x",
-__LINE__, -0x001ab93,	"-109459", "%03.d",
-__LINE__, 0x0eb6b497,	"EB6B497", "%+X",
-__LINE__, 0x07adbac2,	"128826050", "%#0.4d",
-__LINE__, 0xff747068,	"FF747068", "%6.X",
-__LINE__, -0x190ce98f,	"-420276623", "%06.6ld",
-__LINE__, -0x0000007,	"-7", "%.0d",
-__LINE__, 0x0001240f,	"1240f", "% 3x",
-__LINE__, 0x267ae4a0,	"645588128", "%-#ld",
-__LINE__, -0x0000001,	"-1", "% ld",
-__LINE__, -0x0000066,	"-00102", "%.5ld",
-__LINE__, 0x868fa035,	"868fa035", "%x",
-__LINE__, 0x00000000,	"    ", "%-4.ld",
-__LINE__, 0xfffffe72,	"FFFFFE72", "%4.4X",
-__LINE__, 0x00a6b4f4,	"10925300", "%#ld",
-__LINE__, -0x0000002,	"-2", "%00.1d",
-__LINE__, -0x00000a3,	"-163", "%ld",
-__LINE__, 0xfffffffe,	"fffffffe", "% 3.x",
-__LINE__, 0xffe25941,	"ffe25941", "% x",
-__LINE__, 0x0000a20f,	"41487", "%ld",
-__LINE__, -0x000009b,	"-155", "%#.3ld",
-__LINE__, 0x000c5dc1,	"810433", "%4.ld",
-__LINE__, 0x00003ec4,	"16068", "%ld",
-__LINE__, 0x000002f3,	"0755", "%04ld",
-__LINE__, 0xffffff28,	"FFFFFF28", "%.5X",
-__LINE__, -0x08450ff,	"-8671487", "%-3.0ld",
-__LINE__, 0x00000092,	"92", "%x",
-__LINE__, -0x0000317,	"-791", "%d",
-__LINE__, 0x0000000d,	"d", "%x",
-__LINE__, 0x00000036,	"36", "%x",
-__LINE__, -0x112693f,	"-17983807", "%ld",
-__LINE__, 0x00004226,	"16934", "%0.d",
-__LINE__, 0x000001ba,	" 442", "% ld",
-__LINE__, 0xfffffffc,	"0XFFFFFFFC", "%#4X",
-__LINE__, 0xffdb3d23,	"0xffdb3d23", "% #x",
-__LINE__, 0x039eb84d,	"39EB84D", "%+.6X",
-__LINE__, 0xffffc7da,	"ffffc7da", "%0x",
-__LINE__, 0xfffffdb6,	"FFFFFDB6", "%6X",
-__LINE__, 0x001b75b0,	"1799600", "%ld",
-__LINE__, 0xfffffca2,	"FFFFFCA2", "%-X",
-__LINE__, 0xffffffba,	"ffffffba", "%7.4x",
-__LINE__, -0x000124e,	"-4686", "%3.ld",
-__LINE__, -0x000bec0,	"-48832", "% 0d",
-__LINE__, 0xfffffca0,	"fffffca0", "%2.x",
-__LINE__, 0x00b2a462,	"11707490", "%ld",
-__LINE__, 0x0745a647,	"745a647", "%+4.x",
-__LINE__, 0xfffffbac,	"0XFFFFFBAC", "%#3.X",
-__LINE__, -0x0000002,	"-2", "%-0.1d",
-__LINE__, 0x0006cfdb,	"446427", "%#5.d",
-__LINE__, -0x0000001,	"-1", "%d",
-__LINE__, 0x043b134e,	"43B134E", "%X",
-__LINE__, -0x0000015,	"-21", "%ld",
-__LINE__, -0x0000114,	"-276", "%0d",
-__LINE__, -0x0004d4a,	"-19786", "%-d",
-__LINE__, -0x000001c,	"-28", "%ld",
-__LINE__, -0x0cb89fc,	"-13339132", "%ld",
-__LINE__, 0xffffffcf,	"ffffffcf", "%x",
-__LINE__, 0xf6d2387a,	"f6d2387a", "%-x",
-__LINE__, -0x00000cd,	"-205", "%#ld",
-__LINE__, 0x00000000,	"0", "%#x",
-__LINE__, 0xfffffc81,	"fffffc81", "%x",
-__LINE__, 0x00000000,	" 0", "% ld",
-__LINE__, 0x00024fb5,	"24fb5", "%x",
-__LINE__, 0x000012fa,	"12FA", "%X",
-__LINE__, 0x0318ce7c,	"51957372", "%0d",
-__LINE__, 0x02280a99,	"2280a99", "%-x",
-__LINE__, 0xffffff5c,	"FFFFFF5C", "%2.X",
-__LINE__, -0x000002e,	"    -46", "%7ld",
-__LINE__, -0x04a73e8,	"-4879336", "%4ld",
-__LINE__, 0x000007f3,	"7f3", "% 1.3x",
-__LINE__, 0x00000114,	"0x114", "%#x",
-__LINE__, 0x0000030c,	"30c", "%-x",
-__LINE__, 0x001dd0dd,	"0x1dd0dd", "%+#5.5x",
-__LINE__, 0xfff23de3,	"fff23de3", "%-x",
-__LINE__, -0x0178f9c,	"-1544092", "%d",
-__LINE__, 0x02ded8da,	"2DED8DA", "%X",
-__LINE__, -0x0991672,	"-10032754", "%3.d",
-__LINE__, 0x6943c150,	"6943c150", "%x",
-__LINE__, 0xffffc25d,	"FFFFC25D", "%4X",
-__LINE__, 0x00000c9c,	" 0003228", "% .7d",
-__LINE__, 0xffffffdf,	"FFFFFFDF", "% 6.X",
-__LINE__, 0x0001a145,	" 1a145", "%6.0x",
-__LINE__, 0xffdc832f,	"0xffdc832f", "%#.1x",
-__LINE__, 0x00699f7b,	"699f7b", "%x",
-__LINE__, 0xf9575268,	"F9575268", "%+0X",
-__LINE__, 0x04eb4783,	"82528131", "%-ld",
-__LINE__, -0x0000023,	"-35", "%0ld",
-__LINE__, -0x012b08a,	"-1224842", "%0d",
-__LINE__, 0xffffb587,	"FFFFB587", "%X",
-__LINE__, 0xffffffe9,	"ffffffe9", "%x",
-__LINE__, 0x006b5596,	" 7034262", "% 0d",
-__LINE__, 0x004d0d2a,	"+5049642", "%+ld",
-__LINE__, -0x002a099,	"-172185", "%d",
-__LINE__, 0x00000224,	"548", "%ld",
-__LINE__, 0x03e0cca8,	"65064104", "%d",
-__LINE__, -0x7bb389d,	"-129710237", "%.3ld",
-__LINE__, 0xffc630f5,	"ffc630f5", "%-07.0x",
-__LINE__, 0xfffffff8,	"FFFFFFF8", "%X",
-__LINE__, 0x0030225b,	"3154523", "%#d",
-__LINE__, 0xff7f4e28,	"ff7f4e28", "%+4.x",
-__LINE__, 0x14ee154d,	"+351147341", "%+ld",
-__LINE__, 0x00000003,	"03", "%.2d",
-__LINE__, 0xfe0359d6,	"fe0359d6", "%x",
-__LINE__, 0x002b71c3,	"2847171", "%d",
-__LINE__, 0x055c4d4a,	"55C4D4A", "%-X",
-__LINE__, 0xfffb17d2,	"fffb17d2", "% .0x",
-__LINE__, 0x00000002,	"2", "%x",
-__LINE__, 0x000018e1,	"18E1", "%1.1X",
-__LINE__, 0x00000331,	"817", "%0d",
-__LINE__, -0x0000982,	"-2434 ", "%-06.ld",
-__LINE__, -0x0000168,	"-0000360", "%.7ld",
-__LINE__, 0xffffffe9,	"FFFFFFE9", "%-0.4X",
-__LINE__, 0xe42084ef,	"E42084EF", "%X",
-__LINE__, 0x000000aa,	"aa", "%x",
-__LINE__, -0xe8b98b5,	"-244029621", "%+d",
-__LINE__, -0x00000d9,	"-217", "%+2.d",
-__LINE__, 0x0000027b,	"27B", "%+.0X",
-__LINE__, 0x002e52db,	"3035867", "%-ld",
-__LINE__, -0x00e2ba8,	"-928680", "%0.2ld",
-__LINE__, 0x003b74d8,	"3B74D8", "%X",
-__LINE__, -0x000006f,	"-111", "%+ld",
-__LINE__, 0xf8507e22,	"0XF8507E22", "%-#X",
-__LINE__, 0x0629f4c0,	"103412928", "%-ld",
-__LINE__, -0x000002d,	"-45", "%0d",
-__LINE__, -0x0001db0,	"-7600", "%d",
-__LINE__, -0x00001bb,	" -443", "%5.ld",
-__LINE__, 0xffffd2b9,	"ffffd2b9", "%+x",
-__LINE__, 0xffffe685,	"0XFFFFE685", "%#0.7X",
-__LINE__, 0x0000a4ce,	"A4CE", "% X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, 0x0000000c,	"C", "% X",
-__LINE__, 0xfff59369,	"FFF59369", "%7X",
-__LINE__, 0x00000156,	"  156", "%5.X",
-__LINE__, 0x02833aa9,	"+42154665", "%+2d",
-__LINE__, 0x0004a8f3,	"+305395", "%+d",
-__LINE__, 0x01a09267,	"1A09267", "%0.3X",
-__LINE__, 0x000004f1,	"4f1", "%x",
-__LINE__, 0x00000005,	"5", "%x",
-__LINE__, 0x00000119,	" 0281", "% #2.4ld",
-__LINE__, -0x0001a2a,	"-6698", "%ld",
-__LINE__, 0xa3633a57,	"A3633A57", "%7X",
-__LINE__, -0x10bd2970,	"-280832368", "%-d",
-__LINE__, 0xffff9c38,	"ffff9c38", "%x",
-__LINE__, 0xffdbe81e,	"ffdbe81e", "%+6.7x",
-__LINE__, 0xffffffe7,	"FFFFFFE7", "%-3.0X",
-__LINE__, 0x0002f6d6,	"2f6d6", "%5.x",
-__LINE__, 0xffffffff,	"ffffffff", "% x",
-__LINE__, 0xffc2c07a,	"ffc2c07a", "%0.x",
-__LINE__, 0xfcc0e13a,	"FCC0E13A", "%X",
-__LINE__, 0x0000000d,	"d", "% x",
-__LINE__, 0x0016cac8,	"16CAC8", "%-0.3X",
-__LINE__, 0x00945dc1,	"9723329", "%2d",
-__LINE__, 0xf19a1cd1,	"F19A1CD1", "%-X",
-__LINE__, 0x00000003,	"+3", "%+ld",
-__LINE__, 0x00000773,	"1907", "%ld",
-__LINE__, 0x000263e6,	"263e6", "%-x",
-__LINE__, -0x0238b55,	"-2329429", "%d",
-__LINE__, 0x00006c56,	"6C56", "%X",
-__LINE__, 0x0000f34b,	"62283", "%#.0ld",
-__LINE__, -0x1620e21,	"-23203361", "%0ld",
-__LINE__, 0xf9257d6a,	"f9257d6a", "%2x",
-__LINE__, -0x00ed463,	"-971875", "%03.d",
-__LINE__, 0x02bb94c6,	"45847750", "%d",
-__LINE__, 0xffffd20c,	"0XFFFFD20C", "%#X",
-__LINE__, 0x000087d8,	"34776", "%.0d",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%+7.X",
-__LINE__, -0x0009cd5,	"-40149", "%-ld",
-__LINE__, 0xfffff85e,	"FFFFF85E", "% 0.7X",
-__LINE__, -0x0000006,	"    -6", "%+#6.ld",
-__LINE__, 0x007ff453,	"0x7ff453", "%-#1.x",
-__LINE__, 0xffffffe6,	"FFFFFFE6", "%2X",
-__LINE__, 0x0000001f,	"0X1F", "%#4X",
-__LINE__, -0x001c157,	"-115031", "%.3ld",
-__LINE__, 0x00096e06,	"617990", "%3.1ld",
-__LINE__, 0x0f77271d,	"259467037", "%d",
-__LINE__, -0x0001403,	"-5123", "%d",
-__LINE__, 0xffffff8a,	"ffffff8a", "%x",
-__LINE__, -0x000010f,	"-271", "%1.ld",
-__LINE__, 0xe573cc4a,	"E573CC4A", "%0X",
-__LINE__, -0x0000d88,	"-3464", "%-d",
-__LINE__, 0x0000000e,	"14", "%#ld",
-__LINE__, -0x000345b,	"-13403", "%#d",
-__LINE__, 0x00000602,	"602", "%+x",
-__LINE__, 0x00000011,	"17", "%#d",
-__LINE__, -0x0000002,	"-2", "%+d",
-__LINE__, 0x030fe6e6,	"51373798", "%d",
-__LINE__, 0x00000007,	"007", "%.3X",
-__LINE__, 0x0001abe0,	"0X1ABE0", "%+#.4X",
-__LINE__, 0xfffffdb7,	"fffffdb7", "%-6x",
-__LINE__, 0xffffff8d,	"FFFFFF8D", "% 02.2X",
-__LINE__, 0xfff12126,	"FFF12126", "%X",
-__LINE__, 0x0208e32d,	"34136877", "%.2d",
-__LINE__, 0x11c04b55,	"297814869", "%ld",
-__LINE__, 0xff1e5ca3,	"0xff1e5ca3", "%#x",
-__LINE__, 0xf9643f09,	"f9643f09", "%x",
-__LINE__, -0x003c6da,	"-247514", "%4d",
-__LINE__, 0xff69d0e7,	"FF69D0E7", "%-X",
-__LINE__, 0x00006ae9,	"0x6ae9", "%#x",
-__LINE__, -0x005aefe,	"-372478", "%d",
-__LINE__, 0x0000000d,	"00013", "%3.5ld",
-__LINE__, 0x00cc185c,	"CC185C", "%X",
-__LINE__, 0x3dd14d9f,	"3DD14D9F", "%1.4X",
-__LINE__, -0x4cc2ad3,	"-80489171", "%1.d",
-__LINE__, 0xfffff79e,	"fffff79e", "%x",
-__LINE__, 0xfffeeb03,	"fffeeb03", "%-1x",
-__LINE__, -0x0b1b15c,	"-11645276", "%0ld",
-__LINE__, -0x06b558d,	"-7034253", "%ld",
-__LINE__, 0xfffffe61,	"fffffe61", "%x",
-__LINE__, -0x0000002,	"-2", "%d",
-__LINE__, -0x0000162,	"-000354", "%-5.6d",
-__LINE__, 0x01a23780,	"27408256", "%d",
-__LINE__, 0xffff3a9b,	"ffff3a9b", "% x",
-__LINE__, 0xfffffdc7,	"0xfffffdc7", "%#4.5x",
-__LINE__, 0x00000000,	"00", "%.2X",
-__LINE__, -0x0000006,	"-6", "%0ld",
-__LINE__, -0x16072c6,	"-23098054", "%#5ld",
-__LINE__, -0x07152b8,	"-7426744", "%01ld",
-__LINE__, 0x0000d6c6,	"0x0d6c6", "%#1.5x",
-__LINE__, 0x00000f7c,	"000f7c", "%+04.6x",
-__LINE__, 0x00000bd0,	"3024", "%4ld",
-__LINE__, 0x0000295e,	"0x295e", "%#x",
-__LINE__, 0x00002e38,	"11832", "%.5d",
-__LINE__, -0xa2f5de4,	"-170876388", "%#d",
-__LINE__, -0x001aa36,	"-109110", "%-#d",
-__LINE__, 0x03012091,	"3012091", "%+2.5X",
-__LINE__, -0x00009ed,	"-002541", "%-0.6ld",
-__LINE__, 0x0000001d,	"1d", "%x",
-__LINE__, 0xffffe315,	"FFFFE315", "%+4X",
-__LINE__, 0x0000716b,	"716B", "%X",
-__LINE__, 0xfffb8315,	"0xfffb8315", "%+#x",
-__LINE__, 0x00000132,	"132    ", "%-7.3x",
-__LINE__, 0x00000000,	"+0000000", "%+1.7d",
-__LINE__, 0xe16d27ab,	"E16D27AB", "%X",
-__LINE__, 0xffffffe5,	"ffffffe5", "%+x",
-__LINE__, -0x000ab9d,	"-43933", "%ld",
-__LINE__, 0xffd042d6,	"ffd042d6", "%2x",
-__LINE__, 0xffffff9b,	"ffffff9b", "%x",
-__LINE__, 0x000000fb,	"0xfb", "% #1.x",
-__LINE__, 0x0000000f,	" 15", "%#3ld",
-__LINE__, 0xfffba2d8,	"0XFFFBA2D8", "%-#0.X",
-__LINE__, 0xfffffff8,	"0XFFFFFFF8", "% #X",
-__LINE__, 0x00000000,	"    ", "%4.ld",
-__LINE__, 0x00000002,	"2", "%+x",
-__LINE__, 0xfffff314,	"FFFFF314", "%-X",
-__LINE__, 0x00000000,	" 0", "% ld",
-__LINE__, -0x0000007,	"-07", "%3.2ld",
-__LINE__, 0xffffdd80,	"FFFFDD80", "%.6X",
-__LINE__, -0x000001b,	"-27", "%-ld",
-__LINE__, -0x0000258,	"-600", "%-0d",
-__LINE__, 0x00016377,	"16377", "%3X",
-__LINE__, 0x00000001,	"1", "%X",
-__LINE__, -0xac5d314,	"-180736788", "%d",
-__LINE__, -0x000036e,	"-878", "% ld",
-__LINE__, 0xfe346af4,	"fe346af4", "%.5x",
-__LINE__, 0xffffffe1,	"ffffffe1", "%-7.6x",
-__LINE__, -0x0a1df07,	"-10608391", "%#.5d",
-__LINE__, 0x000000c9,	" 0XC9", "%+#5.X",
-__LINE__, 0xfffffffe,	"fffffffe", "%x",
-__LINE__, 0xfffffff8,	"fffffff8", "%+x",
-__LINE__, -0x4517255,	"-72446549", "%.6ld",
-__LINE__, 0xfffa3670,	"FFFA3670", "%-6X",
-__LINE__, 0xffffffe0,	"ffffffe0", "%2.x",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, 0x0000230d,	"8973", "%#.1d",
-__LINE__, 0x00000238,	"238", "%0X",
-__LINE__, 0xfffce5ab,	"FFFCE5AB", "%-X",
-__LINE__, 0x0000002c,	"2C", "%X",
-__LINE__, 0x00000001,	"   1", "%4.ld",
-__LINE__, 0xffffff8d,	"FFFFFF8D", "%-X",
-__LINE__, 0x00069c69,	"433257", "%06d",
-__LINE__, 0xfffffb8d,	"0xfffffb8d", "%#x",
-__LINE__, 0x000d6a2d,	"879149", "%5.5d",
-__LINE__, -0x0001fcb,	"  -8139", "%7.ld",
-__LINE__, 0xfff86937,	"fff86937", "%-0x",
-__LINE__, 0x00059cf9,	"367865", "%#.0ld",
-__LINE__, 0x02c5d87a,	"46520442", "%3.ld",
-__LINE__, 0x00000571,	"1393", "%ld",
-__LINE__, 0x0003c73f,	"+247615", "%+4ld",
-__LINE__, 0x0000004f,	"4f", "% 0x",
-__LINE__, 0x00000000,	"0", "%-ld",
-__LINE__, -0x0e5850f,	"-15041807", "% ld",
-__LINE__, -0x0000002,	"  -0002", "%7.4d",
-__LINE__, 0xfffffd1b,	"fffffd1b", "%05x",
-__LINE__, 0x0000041c,	" 1052", "% #0.ld",
-__LINE__, -0x0000030,	"-48", "%d",
-__LINE__, -0x0013593,	"-79251", "% #d",
-__LINE__, 0x00000001,	"1", "%+X",
-__LINE__, 0x0000056b,	" 56b", "%4.x",
-__LINE__, -0x0000004,	"-4 ", "%-3d",
-__LINE__, -0x0000003,	"-3", "% ld",
-__LINE__, 0xffff7c14,	"0XFFFF7C14", "%#X",
-__LINE__, 0x02f63dd8,	"49692120", "%.7ld",
-__LINE__, -0x03c51c9,	"-3953097", "%+d",
-__LINE__, 0x00ded685,	"14603909", "%5.ld",
-__LINE__, 0xffffffba,	"ffffffba", "%x",
-__LINE__, 0x000370e8,	"225512", "%#ld",
-__LINE__, 0x00000003,	"3", "%X",
-__LINE__, -0x0024a64,	"-150116", "%7.d",
-__LINE__, 0xff486ca1,	"ff486ca1", "%x",
-__LINE__, 0x000001cf,	"1CF", "% X",
-__LINE__, -0x0002d7e,	"-11646", "%-0d",
-__LINE__, 0x0a594c65,	"a594c65", "%.4x",
-__LINE__, -0x0000002,	"-0002", "%-5.4ld",
-__LINE__, 0x00000000,	"", "%00.ld",
-__LINE__, 0x00058bc4,	"58BC4", "%3X",
-__LINE__, 0x0002cf8e,	" 184206", "% 0ld",
-__LINE__, 0x000009c7,	"+2503", "%+4.ld",
-__LINE__, 0xed0c984d,	"ED0C984D", "%X",
-__LINE__, -0x0000058,	"-088", "%#.3ld",
-__LINE__, 0x0076083d,	"0X76083D", "%#6X",
-__LINE__, -0x0000001,	"-1", "%#d",
-__LINE__, -0x6bf1777,	"-113186679", "%#ld",
-__LINE__, -0x000011f,	"-287", "%ld",
-__LINE__, 0x001b0e7d,	"1B0E7D", "%-4X",
-__LINE__, 0x000007ac,	" 1964", "%5.ld",
-__LINE__, 0x00000005,	"5", "%0.d",
-__LINE__, -0x00003ba,	"-954", "%4.0ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, 0x00000019,	"19", "%x",
-__LINE__, 0xffffffe0,	"ffffffe0", "%-.6x",
-__LINE__, 0x0000012a,	" 298", "% d",
-__LINE__, 0x00002c74,	"2c74", "% 4.3x",
-__LINE__, 0x000002d5,	"725", "%d",
-__LINE__, 0x0001c9a9,	"1c9a9", "%-02x",
-__LINE__, 0xffc928c8,	"ffc928c8", "%x",
-__LINE__, -0x03ae51f,	"-3859743", "% #ld",
-__LINE__, 0x0000526d,	"526d", "%x",
-__LINE__, -0x00028f0,	"-10480", "%5ld",
-__LINE__, -0x49b4262,	"-77283938", "%+02.0d",
-__LINE__, 0x028d37f0,	"0x28d37f0", "%+#x",
-__LINE__, 0xd66e0af9,	"D66E0AF9", "%03.X",
-__LINE__, -0x00c7707,	"-816903", "%0d",
-__LINE__, -0x00000d0,	"-208", "%-.1ld",
-__LINE__, 0x0000c328,	"49960", "%d",
-__LINE__, 0x34cb86f1,	"34CB86F1", "%X",
-__LINE__, 0x000000f6,	"F6", "%+X",
-__LINE__, 0x0a3407ec,	"0xa3407ec", "%-#x",
-__LINE__, 0x00007ebc,	"32444", "%#3.d",
-__LINE__, 0xfffd3d65,	"fffd3d65", "%x",
-__LINE__, 0x0007bc82,	"0507010", "%0.7d",
-__LINE__, 0x0005bb93,	"375699", "%ld",
-__LINE__, 0x0ec11cc8,	"0XEC11CC8", "%+#6.2X",
-__LINE__, 0xfffff9c6,	"fffff9c6", "%.5x",
-__LINE__, 0xff05ab70,	"0XFF05AB70", "%-#.3X",
-__LINE__, 0x2328b716,	"589870870", "%d",
-__LINE__, 0x00001a79,	"6777", "%.1d",
-__LINE__, 0xfffee573,	"fffee573", "%0.1x",
-__LINE__, -0x0000929,	"  -2345", "%7.d",
-__LINE__, 0xffffff9a,	"FFFFFF9A", "%2.X",
-__LINE__, 0xfffffe60,	"fffffe60", "%.5x",
-__LINE__, 0xfffffcd2,	"fffffcd2", "%.7x",
-__LINE__, 0x00000001,	"   001", "%6.3X",
-__LINE__, 0x00011e9c,	"+73372", "%+0ld",
-__LINE__, 0x0000002a,	"2a", "% x",
-__LINE__, 0xffffffff,	"ffffffff", "%.7x",
-__LINE__, -0x0008ee8,	"-36584", "%ld",
-__LINE__, 0x0000001c,	"28", "%-d",
-__LINE__, 0x000abeda,	"704218", "%d",
-__LINE__, 0x001347f7,	"1347f7", "%3.0x",
-__LINE__, 0x0000023e,	"574", "%3.3ld",
-__LINE__, 0x00000000,	"0", "%-ld",
-__LINE__, -0x0016de0,	"-93664", "%0ld",
-__LINE__, 0xffffff45,	"FFFFFF45", "% X",
-__LINE__, 0x02dfb08c,	"48214156", "%#ld",
-__LINE__, 0x003d73a2,	"3d73a2", "%6.x",
-__LINE__, 0x00147da7,	"1342887", "%#d",
-__LINE__, -0x5ff0f1e,	"-100601630", "%-01ld",
-__LINE__, -0x000000b,	"-11", "%ld",
-__LINE__, 0x00000168,	"   168", "%+6.x",
-__LINE__, 0xffffc28e,	"ffffc28e", "%0x",
-__LINE__, -0x00003a2,	"-930", "%ld",
-__LINE__, 0x0002e56f,	" 189807", "% 1.ld",
-__LINE__, 0x51abf44f,	"0x51abf44f", "%#.7x",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x9581268f,	"9581268F", "%+X",
-__LINE__, 0xffffff3b,	"FFFFFF3B", "%X",
-__LINE__, 0x000083d4,	" 33748", "% #d",
-__LINE__, 0x00000001,	"1", "%x",
-__LINE__, -0x000e51f,	"-58655", "%.0ld",
-__LINE__, 0x0003eacb,	"256715", "%6ld",
-__LINE__, 0x02be09db,	" 46008795", "% 0.ld",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "% X",
-__LINE__, 0x000084f5,	" 34037", "%6ld",
-__LINE__, -0x1127f99,	"-17989529", "%#d",
-__LINE__, 0x5f6512de,	"5f6512de", "%.7x",
-__LINE__, 0x00000001,	"1", "%x",
-__LINE__, 0xfff74ab5,	"fff74ab5", "%x",
-__LINE__, 0x0eebeb94,	"250342292", "%4.ld",
-__LINE__, 0x0001b846,	"0x1b846", "%#1x",
-__LINE__, 0x001e8c32,	"1E8C32", "%2X",
-__LINE__, -0x0dae932,	"-14346546", "%5.1d",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, -0x0000042,	"-66", "%ld",
-__LINE__, 0xffffff51,	"FFFFFF51", "%0.1X",
-__LINE__, 0x00000043,	"43", "%x",
-__LINE__, 0x04c21f39,	" 79830841", "% 0ld",
-__LINE__, 0x0000061e,	"1566", "%03.3d",
-__LINE__, -0x0000003,	"-3", "%+d",
-__LINE__, 0x015b32db,	" 22754011", "% .4d",
-__LINE__, 0xfffff181,	"FFFFF181", "%-X",
-__LINE__, 0x000017ec,	"0X17EC", "%#X",
-__LINE__, 0x000d703e,	"880702", "%#ld",
-__LINE__, -0x6d7533a0,	"-1836397472", "%ld",
-__LINE__, 0x0000008a,	" 138", "% d",
-__LINE__, -0x7368794b,	"-1936226635", "%+#d",
-__LINE__, 0x0000000d,	"0XD", "%#X",
-__LINE__, 0x0000030d,	"30D", "% X",
-__LINE__, 0xfffff9fe,	"FFFFF9FE", "%5X",
-__LINE__, 0x00001bb2,	"7090", "%d",
-__LINE__, 0x041d2a0c,	"41D2A0C", "%0X",
-__LINE__, 0x00012aee,	" 76526", "% d",
-__LINE__, 0x0000055f,	"55f", "%.1x",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#1X",
-__LINE__, 0x07b0a971,	"+129018225", "%+.2ld",
-__LINE__, 0xfffffff8,	"FFFFFFF8", "%4X",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0x00000038,	"+56", "%+2ld",
-__LINE__, 0xfffffc2f,	"fffffc2f", "%+7.x",
-__LINE__, 0x00004477,	"0x4477", "% #x",
-__LINE__, 0x0000000d,	"0XD", "%+#3X",
-__LINE__, 0xf5bf37b1,	"F5BF37B1", "%1.X",
-__LINE__, 0x1a96f431,	"446100529", "%d",
-__LINE__, 0x0037edf3,	"+3665395", "%+#4.5ld",
-__LINE__, 0x0007f2aa,	"520874", "%0ld",
-__LINE__, -0x00051a3,	"-20899", "%+#1.ld",
-__LINE__, 0x0000037f,	"37F", "%0X",
-__LINE__, 0xffffffb4,	"ffffffb4", "%x",
-__LINE__, -0xd984c00,	"-228084736", "%+06ld",
-__LINE__, 0xffffe1be,	"FFFFE1BE", "%X",
-__LINE__, 0xfff20d48,	"FFF20D48", "%+6.0X",
-__LINE__, 0x000028b7,	"0x028b7", "%-#7.5x",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, 0x03f37945,	"66287941", "%d",
-__LINE__, 0xffffffed,	"0XFFFFFFED", "%+#6.4X",
-__LINE__, 0x0000f046,	"f046", "%x",
-__LINE__, 0xe9772b51,	"E9772B51", "%-1.X",
-__LINE__, 0xfffffffe,	"fffffffe", "% x",
-__LINE__, 0xfffffffa,	"0xfffffffa", "%#x",
-__LINE__, 0x00000015,	"15", "%-X",
-__LINE__, 0x0000003c,	"60", "%#ld",
-__LINE__, 0x3103952d,	"822318381", "%0.ld",
-__LINE__, 0x17ba68bb,	"398092475", "%2d",
-__LINE__, 0x000006c4,	"+1732", "%+.2d",
-__LINE__, 0x00000043,	"67", "%#d",
-__LINE__, 0x0043fb55,	"4455253", "%.1ld",
-__LINE__, 0x00004b76,	"4b76", "% 0x",
-__LINE__, 0xfff4c56b,	"FFF4C56B", "%7X",
-__LINE__, 0x00766055,	"766055", "%+5x",
-__LINE__, -0x000009f,	"-159", "%+d",
-__LINE__, 0xffff063f,	"ffff063f", "%-2x",
-__LINE__, 0x00808fc8,	"808fc8", "%x",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, 0x000000f1,	"00000f1", "%+02.7x",
-__LINE__, 0x00000002,	"2", "%X",
-__LINE__, 0x00000000,	"000", "%03d",
-__LINE__, 0xe63f73b2,	"E63F73B2", "% 1X",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%5.1X",
-__LINE__, 0x0d3fa38b,	"222274443", "%1d",
-__LINE__, 0x00000000,	"0", "% X",
-__LINE__, 0x00000001,	"   1", "%04.ld",
-__LINE__, 0x00000046,	"46", "%0X",
-__LINE__, 0x0000761f,	" 30239", "% ld",
-__LINE__, -0x0002517,	"-9495", "%+d",
-__LINE__, 0x00000156,	"156", "% 0x",
-__LINE__, 0x1c55eba2,	"1c55eba2", "%.6x",
-__LINE__, 0x005af80d,	"5af80d", "%.6x",
-__LINE__, 0x0000002e,	"46", "%d",
-__LINE__, -0x0007c0f,	"-31759", "%ld",
-__LINE__, 0xffffe924,	"FFFFE924", "%7X",
-__LINE__, 0x00000174,	"372", "%ld",
-__LINE__, 0xffffffc9,	"0xffffffc9", "%-#x",
-__LINE__, 0x00000020,	"+000032", "%+07d",
-__LINE__, 0xffffe5d9,	"FFFFE5D9", "%4.5X",
-__LINE__, 0xffffffa3,	"FFFFFFA3", "%+.3X",
-__LINE__, 0x00000a03,	"+2563", "%+2d",
-__LINE__, 0x001b58ca,	"+1792202", "%+4d",
-__LINE__, 0xffffffc9,	"0xffffffc9", "%+#5x",
-__LINE__, -0x0000003,	"-3", "% d",
-__LINE__, 0xfffffffc,	"fffffffc", "%+0x",
-__LINE__, -0x0000002,	"-02", "%.2d",
-__LINE__, 0x000243fb,	"148475", "%-ld",
-__LINE__, 0x00000001,	"1", "%0d",
-__LINE__, -0x0000672,	"-1650", "%ld",
-__LINE__, -0x0005413,	"-0021523", "% 7.7d",
-__LINE__, 0x00000017,	"0X17", "%#X",
-__LINE__, 0x00000e48,	"3656", "%0d",
-__LINE__, 0xffe79b38,	"ffe79b38", "%-x",
-__LINE__, 0xffffff15,	"FFFFFF15", "%+6.1X",
-__LINE__, 0xfff0272c,	"fff0272c", "%-.5x",
-__LINE__, -0x00b706f,	"-749679", "%1.ld",
-__LINE__, 0x0176aeec,	"176AEEC", "%.1X",
-__LINE__, -0x00005a1,	"-1441", "% 0ld",
-__LINE__, -0x0000002,	"-00002", "%.5d",
-__LINE__, -0xd2e6f5d,	"-221146973", "%1ld",
-__LINE__, -0x0000001,	" -001", "%5.3ld",
-__LINE__, 0x00000001,	"    1", "%05.ld",
-__LINE__, 0x0000749e,	"+29854", "%+#d",
-__LINE__, 0x00000005,	"5", "%d",
-__LINE__, 0xfa7128b0,	"fa7128b0", "%1.x",
-__LINE__, 0xffffbbb4,	"0XFFFFBBB4", "%#.1X",
-__LINE__, 0x0006862f,	"427567", "%d",
-__LINE__, 0x00000002,	"2", "%X",
-__LINE__, 0x000005d4,	"5d4", "% x",
-__LINE__, 0x001387e1,	"1279969", "%-05.0ld",
-__LINE__, -0x0035a56,	"-219734", "%ld",
-__LINE__, -0x4064ecc6,	"-1080356038", "%ld",
-__LINE__, 0x0000360d,	"13837", "%0ld",
-__LINE__, -0xea1a85b,	"-245475419", "%-.2ld",
-__LINE__, 0xffffff2d,	"FFFFFF2D", "%X",
-__LINE__, 0x00000004,	"   0004", "%7.4x",
-__LINE__, 0x00f72ffd,	"F72FFD", "%-X",
-__LINE__, 0x00000fa2,	"fa2  ", "%-5x",
-__LINE__, 0x05ae1f9a,	"95297434", "%#ld",
-__LINE__, 0x0000bf2e,	"48942", "%3.d",
-__LINE__, 0x00000000,	" ", "%1.X",
-__LINE__, 0x01bcb097,	"29143191", "%ld",
-__LINE__, 0x0000009c,	"156 ", "%-4.0d",
-__LINE__, 0xfffffffe,	"fffffffe", "% x",
-__LINE__, 0x00000001,	"1     ", "%-6.d",
-__LINE__, 0xffffffef,	"ffffffef", "%7.x",
-__LINE__, 0xfffffec1,	"fffffec1", "%.5x",
-__LINE__, -0x000000f,	"-15", "%-1d",
-__LINE__, -0x0008426,	"-33830", "%0ld",
-__LINE__, 0x005be0ae,	"5BE0AE", "% X",
-__LINE__, 0x00000009,	"      9", "%+7X",
-__LINE__, -0x0007e18,	"-32280", "%+0.d",
-__LINE__, 0x01697ba1,	" 23690145", "% 5.ld",
-__LINE__, -0x0012042,	"-073794", "%7.6d",
-__LINE__, 0x04e9bd0d,	"4e9bd0d", "%-2x",
-__LINE__, 0xffffffd9,	"FFFFFFD9", "%.2X",
-__LINE__, -0x01b9632,	"-1807922", "%.6ld",
-__LINE__, 0x000000cd,	"205", "%1.ld",
-__LINE__, 0x00000000,	" ", "% .0d",
-__LINE__, 0xff17bbb1,	"ff17bbb1", "%x",
-__LINE__, -0x00146d7,	"-83671", "%+1.ld",
-__LINE__, 0xfffff144,	"fffff144", "%x",
-__LINE__, 0x000f8dbe,	"F8DBE", "%3.X",
-__LINE__, -0x000381c,	"-14364", "%d",
-__LINE__, 0x0000001e,	"  30", "%4.1d",
-__LINE__, 0x00000016,	"22", "%-0d",
-__LINE__, 0x00000002,	"+02", "%+1.2ld",
-__LINE__, 0x0000e803,	"59395", "%d",
-__LINE__, 0xb4c2448d,	"b4c2448d", "%-7x",
-__LINE__, 0x000e697d,	"944509", "%ld",
-__LINE__, 0xfffe6e32,	"0XFFFE6E32", "%#X",
-__LINE__, 0x00000190,	"  190", "%+5.X",
-__LINE__, -0x03a2219,	"-3809817", "%#6.ld",
-__LINE__, -0x000003c,	"-60 ", "%-#4.ld",
-__LINE__, 0x00000000,	"   ", "% 03.ld",
-__LINE__, -0x074f922,	"-7665954", "%ld",
-__LINE__, -0x00000f0,	"-240", "%-ld",
-__LINE__, 0xfffe42d2,	"0XFFFE42D2", "%#X",
-__LINE__, 0x000000dd,	"DD", "%X",
-__LINE__, 0x00359abe,	"359ABE", "%.1X",
-__LINE__, 0xffec7bdf,	"FFEC7BDF", "%0.1X",
-__LINE__, 0x0ecddcba,	"248372410", "%-#3.d",
-__LINE__, 0x00ad0dbc,	"11341244", "%ld",
-__LINE__, -0x0000001,	"-1", "%-d",
-__LINE__, 0x00050841,	"50841", "% .5x",
-__LINE__, 0x01d359e7,	"1d359e7", "%1.x",
-__LINE__, 0xff9efaa3,	"FF9EFAA3", "%X",
-__LINE__, 0x0007ea10,	"+518672", "%+ld",
-__LINE__, -0x000671c,	"-26396", "%1d",
-__LINE__, 0xffffff91,	"0xffffff91", "%#4.4x",
-__LINE__, 0x00000000,	"+", "%+0.0ld",
-__LINE__, -0x002c53e,	"-181566", "%3.d",
-__LINE__, 0xffffff56,	"ffffff56", "%x",
-__LINE__, 0xfffff589,	"FFFFF589", "%+X",
-__LINE__, 0x00024d13,	"24D13", "%-5.2X",
-__LINE__, 0x00000000,	"     0", "%6.1d",
-__LINE__, 0x00a64f33,	"A64F33", "%4.4X",
-__LINE__, 0xffebb57a,	"FFEBB57A", "%5.4X",
-__LINE__, 0xfff3b4a0,	"fff3b4a0", "%2.x",
-__LINE__, 0xffffffd9,	"FFFFFFD9", "%.2X",
-__LINE__, 0x00d37b84,	"13859716", "%d",
-__LINE__, 0x00001e85,	"0001E85", "%0.7X",
-__LINE__, -0x756148f,	"-123081871", "% 7.d",
-__LINE__, -0x0319339,	"-3248953", "%+#.4d",
-__LINE__, -0x00798b8,	"-497848", "%#5ld",
-__LINE__, -0x0000039,	"-57", "%0d",
-__LINE__, -0x000b1d7,	"-45527", "%+0.ld",
-__LINE__, 0xff811fba,	"FF811FBA", "%+X",
-__LINE__, 0x00000042,	" 66", "% ld",
-__LINE__, 0xfffffe31,	"0XFFFFFE31", "%#X",
-__LINE__, 0x00000073,	"115", "%ld",
-__LINE__, 0x45091a39,	"0x45091a39", "%+#3.x",
-__LINE__, 0x001270f5,	"1270f5", "%-5.6x",
-__LINE__, 0xfffd91fd,	"fffd91fd", "%x",
-__LINE__, -0x0817bad,	"-8485805", "%#ld",
-__LINE__, -0x32ad55f,	"-53138783", "%0d",
-__LINE__, 0x00003e57,	"15959", "%0ld",
-__LINE__, -0x0048756,	"-296790", "%2.6d",
-__LINE__, 0xff90f45f,	"FF90F45F", "% X",
-__LINE__, 0x0000e454,	"0e454", "% .5x",
-__LINE__, 0xfffffffc,	"fffffffc", "%x",
-__LINE__, 0xfffffff7,	"FFFFFFF7", "%-2X",
-__LINE__, 0xffdabf0e,	"FFDABF0E", "%+X",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#1X",
-__LINE__, 0x01516650,	"1516650", "% x",
-__LINE__, 0xffffff51,	"FFFFFF51", "%X",
-__LINE__, 0x000000ea,	"234", "%00.d",
-__LINE__, 0x06db60ca,	"115040458", "%5.d",
-__LINE__, 0x00000f01,	" 3841", "% d",
-__LINE__, 0x00000009,	"9", "%x",
-__LINE__, 0x299b3ba0,	"299b3ba0", "%6.7x",
-__LINE__, 0x0067f298,	"67f298", "%-2.6x",
-__LINE__, 0xfffffff5,	"FFFFFFF5", "% 2X",
-__LINE__, 0x00102ff9,	"102FF9", "%-.0X",
-__LINE__, 0xffc22393,	"0xffc22393", "% #6x",
-__LINE__, 0x00007db5,	"32181", "%-2ld",
-__LINE__, 0x0000b0a3,	"0xb0a3", "%#0x",
-__LINE__, 0x001ceebb,	"1CEEBB", "%-3.4X",
-__LINE__, 0x00025101,	"0x25101", "%#x",
-__LINE__, -0x0000001,	"-1", "%0ld",
-__LINE__, 0xffffd846,	"FFFFD846", "%+2.3X",
-__LINE__, 0x00001d79,	" 7545", "% 0.1ld",
-__LINE__, -0x0000002,	"   -2", "%5d",
-__LINE__, 0xf93b9fdc,	"f93b9fdc", "%5x",
-__LINE__, 0xffff0021,	"FFFF0021", "%6X",
-__LINE__, 0x00007cf9,	"7cf9", "%3.1x",
-__LINE__, -0x0000002,	"-2", "%d",
-__LINE__, 0x00001d84,	"1d84", "%0x",
-__LINE__, -0x033201e,	"-3350558", "%-2.0d",
-__LINE__, 0xfff8a6fb,	"FFF8A6FB", "%+.7X",
-__LINE__, 0x00006fff,	" 28671", "% ld",
-__LINE__, -0x02a274a,	"-2762570", "%d",
-__LINE__, -0x0006628,	"-26152", "%00ld",
-__LINE__, 0x00000011,	"11", "%-x",
-__LINE__, -0x0000ed9,	"-3801", "%0.ld",
-__LINE__, 0xfc5b725d,	"FC5B725D", "%X",
-__LINE__, 0x3530bd4e,	"892386638", "%7.d",
-__LINE__, 0x03bb4ff7,	"62607351", "%#4.7ld",
-__LINE__, 0x00009f86,	"9f86", "%x",
-__LINE__, 0x0000e727,	"59175", "%1d",
-__LINE__, 0xfffffdf2,	"0XFFFFFDF2", "%#X",
-__LINE__, 0x00e60dbf,	"0XE60DBF", "% #1.X",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%+X",
-__LINE__, 0x0a16f44e,	"0XA16F44E", "%#.0X",
-__LINE__, 0x0001f97c,	"1f97c", "% x",
-__LINE__, 0x0000000d,	"13", "%#0ld",
-__LINE__, 0x0000002a,	"42", "%0ld",
-__LINE__, 0x00000007,	"   +7", "%+5ld",
-__LINE__, 0xffffff7f,	"FFFFFF7F", "%-X",
-__LINE__, 0x000006a6,	"1702", "%ld",
-__LINE__, 0xfaff2fb1,	"faff2fb1", "% x",
-__LINE__, 0xffff94ab,	"ffff94ab", "%x",
-__LINE__, 0x011d611b,	"0X11D611B", "%#2.3X",
-__LINE__, 0x00000000,	" +000", "%+#5.3ld",
-__LINE__, -0x87fcc37,	"-142593079", "%+d",
-__LINE__, -0x0417424,	"-4289572", "%+d",
-__LINE__, 0x03fabc0c,	"3fabc0c", "%x",
-__LINE__, 0xfffff880,	"fffff880", "%-x",
-__LINE__, 0x000002d7,	"2d7", "%-02.x",
-__LINE__, 0x00003e82,	"16002", "%#d",
-__LINE__, -0x0003713,	"-14099", "% 5d",
-__LINE__, -0x0000027,	"-39", "%ld",
-__LINE__, 0x00013098,	"0077976", "%01.7d",
-__LINE__, -0x000000c,	"-12", "%ld",
-__LINE__, -0x00000c0,	"-192", "% ld",
-__LINE__, 0xffbe9285,	"FFBE9285", "%3.X",
-__LINE__, 0x00000046,	"46", "%x",
-__LINE__, 0x00000000,	"    ", "%+4.x",
-__LINE__, 0x00011e72,	"73330", "%2.3d",
-__LINE__, -0x5276dd7,	"-86470103", "%d",
-__LINE__, 0x00000013,	"19", "%-02.ld",
-__LINE__, 0x384118a7,	"0X384118A7", "%-#X",
-__LINE__, 0x00000000,	"0", "% #X",
-__LINE__, 0x00000009,	"9", "%#ld",
-__LINE__, 0x00021145,	"135493", "%-ld",
-__LINE__, 0xff188a0c,	"FF188A0C", "%1.X",
-__LINE__, 0xffffffd5,	"ffffffd5", "%0x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "% 0X",
-__LINE__, 0xffff74a3,	"ffff74a3", "%x",
-__LINE__, 0x01d5a2f8,	"1d5a2f8", "%-0.x",
-__LINE__, 0xfffffef6,	"fffffef6", "%+06.x",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0x00000000,	"+0", "%+ld",
-__LINE__, 0xfffffffc,	"fffffffc", "%4.x",
-__LINE__, -0x0000344,	"-0836", "% .4d",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%0X",
-__LINE__, 0x000a3121,	"667937", "%#4.4ld",
-__LINE__, 0x0001e211,	"0X1E211", "%#X",
-__LINE__, 0x00000c8b,	"00C8B", "%05X",
-__LINE__, 0xfffffffe,	"fffffffe", "%+0x",
-__LINE__, 0x001a53ce,	"1725390", "%d",
-__LINE__, 0x0000057f,	"57f    ", "%-7.x",
-__LINE__, -0x0073e4d,	"-474701", "%#ld",
-__LINE__, -0x0000002,	" -2", "% 3.d",
-__LINE__, 0x482dc404,	"482DC404", "%X",
-__LINE__, 0x0000011c,	"11c", "%-.1x",
-__LINE__, 0x00000c12,	" 3090", "%5.3ld",
-__LINE__, 0xfffe1068,	"FFFE1068", "%-.4X",
-__LINE__, -0x0055e88,	"-351880", "%ld",
-__LINE__, 0x000c9cef,	"+826607", "%+d",
-__LINE__, 0xffffffe3,	"ffffffe3", "%0x",
-__LINE__, -0x0000ee9,	"-3817", "%#ld",
-__LINE__, 0xff1f6daa,	"FF1F6DAA", "%X",
-__LINE__, 0xfffffc4e,	"FFFFFC4E", "%5.2X",
-__LINE__, -0x000040a,	"-1034", "%d",
-__LINE__, -0x0000085,	"-00133", "% 01.5d",
-__LINE__, -0x126c797c,	"-309098876", "%5.ld",
-__LINE__, 0x00000039,	" 57", "% d",
-__LINE__, 0xfffffff6,	"0xfffffff6", "%#5.x",
-__LINE__, 0xfffffff4,	"fffffff4", "%7.6x",
-__LINE__, 0x00000003,	"3", "%ld",
-__LINE__, 0x0000f8ae,	"f8ae", "%.0x",
-__LINE__, 0x003ca1cf,	"3973583", "%#3.7d",
-__LINE__, 0x14687009,	"0x14687009", "%+#3x",
-__LINE__, 0xfffff1f7,	"0xfffff1f7", "%#4.5x",
-__LINE__, 0xfffff17a,	"fffff17a", "%3.x",
-__LINE__, 0x0011ea18,	"1174040", "%ld",
-__LINE__, -0x0000019,	"-25", "%03.d",
-__LINE__, 0x00015d72,	"0X15D72", "%-#X",
-__LINE__, 0xffde4a41,	"ffde4a41", "%x",
-__LINE__, 0x00006f1f,	"28447", "%d",
-__LINE__, 0xffffffbd,	"0xffffffbd", "%#.1x",
-__LINE__, 0x000013b9,	"13B9", "%0X",
-__LINE__, -0x00001b9,	"-00441", "%1.5d",
-__LINE__, 0x00000001,	"000001", "%-.6d",
-__LINE__, 0x7b602d8f,	"+2069900687", "%+0ld",
-__LINE__, 0x0005e323,	"+385827", "%+ld",
-__LINE__, 0x00002fce,	"2FCE", "%+0X",
-__LINE__, 0x0000000e,	"0014", "%.4d",
-__LINE__, 0xffffffd6,	"0XFFFFFFD6", "%#4.X",
-__LINE__, 0x037bf361,	"58454881", "%5.ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%-7.5X",
-__LINE__, -0x016d4dc,	"-1496284", "%6ld",
-__LINE__, 0x0005be9a,	"0x5be9a", "%-#.5x",
-__LINE__, 0xffffffff,	"ffffffff", "%1x",
-__LINE__, 0x00000055,	"     85", "% 7.d",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, -0x0135392,	"-1266578", "% ld",
-__LINE__, 0x00850f26,	"8720166", "%d",
-__LINE__, 0xffffee39,	"ffffee39", "%0x",
-__LINE__, 0x000000dd,	"221", "%ld",
-__LINE__, 0x00000000,	"      ", "%6.d",
-__LINE__, 0x000000d8,	"d8", "%x",
-__LINE__, 0x000007ec,	"002028", "%4.6ld",
-__LINE__, 0x0dab4e67,	"0XDAB4E67", "%#X",
-__LINE__, 0xfffd7c95,	"FFFD7C95", "% 4X",
-__LINE__, 0x0009302d,	"9302D", "%3.1X",
-__LINE__, 0x00000003,	" 3", "% d",
-__LINE__, 0x0000082f,	"82f", "%-x",
-__LINE__, 0x0652517f,	"652517F", "%-.2X",
-__LINE__, -0x1fd8f4e3,	"-534312163", "%d",
-__LINE__, 0x00000176,	"176", "%-x",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0x0000001a,	"1A", "%X",
-__LINE__, -0x0005740,	"-22336", "% 0ld",
-__LINE__, 0xffffffff,	"ffffffff", "%6x",
-__LINE__, 0x1b273b80,	"0x1b273b80", "%#x",
-__LINE__, 0x00000065,	"65", "%X",
-__LINE__, 0x6a62138a,	"1784812426", "%2ld",
-__LINE__, 0x000001a2,	"1A2", "%X",
-__LINE__, -0x002aafd,	"-174845", "%02.ld",
-__LINE__, 0x00000014,	"20", "%d",
-__LINE__, -0x00000c7,	"   -199", "%7.0ld",
-__LINE__, 0xff545bfd,	"ff545bfd", "%-x",
-__LINE__, -0x002beb9,	"-179897", "%02.2ld",
-__LINE__, -0x00000df,	"-223", "% 02.d",
-__LINE__, -0x000d569,	"-54633", "%1.ld",
-__LINE__, 0x0000000e,	"14", "%d",
-__LINE__, -0x0077407,	"-488455", "% ld",
-__LINE__, 0x0001be09,	"114185", "%ld",
-__LINE__, -0x0000514,	"-01300", "%+05.5d",
-__LINE__, 0xf1fb397f,	"f1fb397f", "%+x",
-__LINE__, 0xfdb6707c,	"FDB6707C", "%X",
-__LINE__, 0x03cad111,	"3cad111", "%5.x",
-__LINE__, -0x022e72f,	"-2287407", "%d",
-__LINE__, -0xda35f48,	"-228810568", "%d",
-__LINE__, -0x02d1fd4,	"-2957268", "%1.3d",
-__LINE__, 0x0000005f,	"+95", "%+2d",
-__LINE__, 0xfffbf8a1,	"FFFBF8A1", "%4.2X",
-__LINE__, 0x0000071e,	"   71e", "%6.x",
-__LINE__, 0x000cc8a5,	"+837797", "%+03ld",
-__LINE__, 0x000eebe9,	" EEBE9", "%6.X",
-__LINE__, -0x2896b204,	"-680964612", "%d",
-__LINE__, -0x09553f8,	"-9786360", "%d",
-__LINE__, 0x000015d3,	"5587", "%0d",
-__LINE__, 0x0000056d,	" 56d", "%+4.x",
-__LINE__, -0x00624ad,	"-402605", "% ld",
-__LINE__, 0xfea64ba5,	"0xfea64ba5", "%#1x",
-__LINE__, 0x004f35c6,	"5191110", "%-ld",
-__LINE__, -0x1441fe4,	"-21241828", "%d",
-__LINE__, 0xffffff95,	"FFFFFF95", "%X",
-__LINE__, 0xfffecf81,	"FFFECF81", "%-2.X",
-__LINE__, -0x00002bb,	"-699", "%-d",
-__LINE__, -0x0000c29,	"-3113", "% 02ld",
-__LINE__, 0x000026a3,	" 9891", "% .4d",
-__LINE__, 0x00000003,	"3", "%-x",
-__LINE__, 0x000007db,	"+02011", "%+.5ld",
-__LINE__, 0xfff99558,	"FFF99558", "%.1X",
-__LINE__, 0x0000fce6,	"64742", "%4.0d",
-__LINE__, 0x000b7ea2,	"753314", "%ld",
-__LINE__, 0x13e5df30,	"0X13E5DF30", "%#2.X",
-__LINE__, 0x006761c4,	"06761C4", "%6.7X",
-__LINE__, 0xffffff78,	"FFFFFF78", "%0.X",
-__LINE__, 0xfffff1c0,	"0xfffff1c0", "% #x",
-__LINE__, -0x034af1c,	"-3452700", "% 06.1d",
-__LINE__, 0x000000de,	"0000222", "%2.7ld",
-__LINE__, 0x000003d8,	"0x3d8", "%#4.x",
-__LINE__, -0x001a1d1,	"-106961", "%3.1d",
-__LINE__, -0x0000002,	"-2", "% d",
-__LINE__, 0x00001de6,	"+7654", "%+0ld",
-__LINE__, 0x00000001,	"001", "%#.3d",
-__LINE__, -0x53dacf9f,	"-1406848927", "%ld",
-__LINE__, 0xfffffffc,	"fffffffc", "%3.3x",
-__LINE__, -0x00950e8,	"-610536", "%3.6ld",
-__LINE__, 0xff14ade9,	"FF14ADE9", "%6X",
-__LINE__, 0x012f5284,	"0X12F5284", "% #5X",
-__LINE__, 0x00005a21,	" 5a21", "%5x",
-__LINE__, 0x00000638,	"1592", "%2.4ld",
-__LINE__, -0x063017b,	"-6488443", "%ld",
-__LINE__, 0x00000000,	"0", "% X",
-__LINE__, 0xfffe8ef2,	"FFFE8EF2", "%+0X",
-__LINE__, -0x0001c96,	"-7318", "%.3d",
-__LINE__, 0x0000ca7d,	"51837", "%ld",
-__LINE__, 0x00000001,	"1", "%+1x",
-__LINE__, 0xfffff7bc,	"FFFFF7BC", "%X",
-__LINE__, -0x03d15e2,	"-4003298", "%ld",
-__LINE__, 0xfffffffe,	"fffffffe", "% x",
-__LINE__, 0x00066183,	"+418179", "%+7.1ld",
-__LINE__, 0xffffef2e,	"ffffef2e", "%-2.x",
-__LINE__, 0x00000000,	" 000", "%04.3x",
-__LINE__, -0x000000f,	"-15", "% d",
-__LINE__, -0x00001f5,	"-501", "%d",
-__LINE__, 0x0c67f159,	"c67f159", "%6.2x",
-__LINE__, -0x0000006,	"-6", "%.1d",
-__LINE__, 0x00000005,	"0X5", "%+#1X",
-__LINE__, -0x0000002,	"    -2", "%6.ld",
-__LINE__, 0xeb2183ec,	"eb2183ec", "% x",
-__LINE__, -0x5e12a322,	"-1578279714", "%d",
-__LINE__, 0x00000001,	"0x1", "%#x",
-__LINE__, -0x0001ea4,	"-7844", "%0d",
-__LINE__, -0x19955a3,	"-26826147", "%d",
-__LINE__, 0x000002a6,	"2A6", "%2.X",
-__LINE__, 0x00000002,	"2", "%X",
-__LINE__, 0xfffffeec,	"fffffeec", "%0.4x",
-__LINE__, 0xfffffffc,	"fffffffc", "%0x",
-__LINE__, 0xffdfe740,	"FFDFE740", "% X",
-__LINE__, -0x0b0b3e7,	"-11580391", "%.1d",
-__LINE__, 0x8e01077c,	"8E01077C", "%5.7X",
-__LINE__, 0x3b6b6d55,	"996896085", "%1.1d",
-__LINE__, 0x000016af,	"5807", "%ld",
-__LINE__, -0x0004900,	"-18688", "%d",
-__LINE__, 0xfffd77bc,	"FFFD77BC", "%X",
-__LINE__, 0x004cbd74,	"5029236", "%0d",
-__LINE__, 0x00000003,	" 00003", "%6.5d",
-__LINE__, 0x0004720f,	"4720f", "% x",
-__LINE__, 0x0e44535d,	"e44535d", "%4x",
-__LINE__, 0xfffffff9,	"FFFFFFF9", "%3.3X",
-__LINE__, -0x0000005,	"-5", "%-d",
-__LINE__, 0x000001a6,	"00001A6", "%1.7X",
-__LINE__, 0x0000004a,	"4A", "%-2.X",
-__LINE__, 0xfffff249,	"FFFFF249", "%X",
-__LINE__, 0x00004345,	"4345", "%x",
-__LINE__, 0x0197041d,	"197041d", "%+0x",
-__LINE__, 0x0000019a,	"   19a", "% 6.x",
-__LINE__, 0xfff98376,	"FFF98376", "%X",
-__LINE__, 0xfc536c41,	"FC536C41", "%X",
-__LINE__, -0x0008d91,	"-36241", "% d",
-__LINE__, 0xf058d69d,	"f058d69d", "%4.x",
-__LINE__, -0x00013ef,	"-5103", "%d",
-__LINE__, -0x0000003,	"-3", "%00ld",
-__LINE__, -0x09e80f0,	"-10387696", "%+07ld",
-__LINE__, -0x0222c15,	"-2239509", "%#0.4ld",
-__LINE__, 0x00000004,	"4", "%0ld",
-__LINE__, -0x02c6b0d,	"-2910989", "% 0ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%-4X",
-__LINE__, 0xffffff3d,	"FFFFFF3D", "%-.0X",
-__LINE__, -0x0000015,	"-21", "%0d",
-__LINE__, 0x131dfc90,	"+320732304", "%+d",
-__LINE__, 0xffffffff,	"ffffffff", "%+x",
-__LINE__, 0x000035c8,	"13768", "%0ld",
-__LINE__, 0x00000033,	"0x0033", "%#.4x",
-__LINE__, 0x0ce7e8c1,	"0xce7e8c1", "%#.7x",
-__LINE__, 0xfc18b5d2,	"FC18B5D2", "%+.3X",
-__LINE__, 0x00000015,	"21", "%d",
-__LINE__, 0x001a5e7c,	"1a5e7c", "%05x",
-__LINE__, -0x000fbf0,	"-64496", "%ld",
-__LINE__, -0x000a4f7,	"-042231", "%+2.6d",
-__LINE__, -0x0000002,	"-002", "%3.3ld",
-__LINE__, 0x00728878,	"728878", "%0X",
-__LINE__, -0x0000002,	"-2", "%#.1ld",
-__LINE__, -0x00002ef,	"-751", "%-0ld",
-__LINE__, 0xfffffff7,	"fffffff7", "%.3x",
-__LINE__, 0x00491867,	"0491867", "%.7X",
-__LINE__, 0x00000d4d,	"3405", "%-ld",
-__LINE__, 0x00234e86,	"234E86", "%0X",
-__LINE__, -0x000001b,	"-27", "%ld",
-__LINE__, 0x00275255,	"2576981", "%.5ld",
-__LINE__, 0xfeacc214,	"0XFEACC214", "%-#3.X",
-__LINE__, -0x0001ce5,	"-7397", "%+#2.2ld",
-__LINE__, 0x089ddb6a,	"144563050", "%d",
-__LINE__, 0x003d5a95,	"3D5A95", "%1X",
-__LINE__, 0x002f0b6d,	"3083117", "%d",
-__LINE__, 0x1e79e228,	"511304232", "%ld",
-__LINE__, 0xfffffe6b,	"FFFFFE6B", "%+0X",
-__LINE__, -0x5104ff3,	"-84955123", "%.4ld",
-__LINE__, 0xfffff1de,	"FFFFF1DE", "%X",
-__LINE__, 0x000000cf,	"+207", "%+.1ld",
-__LINE__, -0x16ad0164,	"-380436836", "%+5.d",
-__LINE__, 0x001fefa6,	"2092966", "%ld",
-__LINE__, 0x00000000,	"00", "%-.2d",
-__LINE__, 0x00195f45,	"195f45", "%+0x",
-__LINE__, 0x00000001,	"  1", "%3.ld",
-__LINE__, -0x00001c9,	"-457", "% ld",
-__LINE__, 0x0002479e,	"149406", "%#ld",
-__LINE__, 0x001ab18b,	"1749387", "%04d",
-__LINE__, 0x00000045,	"69", "%ld",
-__LINE__, 0xfbb13f7d,	"fbb13f7d", "%.2x",
-__LINE__, 0x03ddc208,	"3ddc208", "%x",
-__LINE__, 0x00000007,	"000007", "%#.6d",
-__LINE__, 0x00000000,	"0", "%01X",
-__LINE__, -0x0023110,	"-143632", "%+0.3d",
-__LINE__, 0x00000006,	"06", "%#.2d",
-__LINE__, 0xffff9ec9,	"ffff9ec9", "%7x",
-__LINE__, -0x08afb12,	"-9108242", "% #0.ld",
-__LINE__, 0x00000004,	"4", "%X",
-__LINE__, 0x00059684,	"59684", "%x",
-__LINE__, 0xfff8d8f5,	"FFF8D8F5", "%X",
-__LINE__, 0x00b7027d,	"+11993725", "%+0.7ld",
-__LINE__, 0x0000d814,	"55316", "%0ld",
-__LINE__, 0x03c95a08,	"3c95a08", "%3x",
-__LINE__, -0x0b65f9a,	"-11952026", "%d",
-__LINE__, 0xfd956021,	"fd956021", "%0x",
-__LINE__, 0x000000ed,	"ed", "%0x",
-__LINE__, -0x006a80c,	"-436236", "%.6ld",
-__LINE__, 0xfedb109d,	"fedb109d", "%x",
-__LINE__, 0x00000001,	"1", "%X",
-__LINE__, 0x00b3eb71,	" 11791217", "% d",
-__LINE__, 0x00000016,	"16", "%0X",
-__LINE__, 0x000001db,	" 475", "% ld",
-__LINE__, 0x00465eaf,	"4611759", "%0d",
-__LINE__, 0x0001b423,	"1B423", "%0X",
-__LINE__, 0x05df95ea,	"5df95ea", "%+.5x",
-__LINE__, 0x0000000e,	"     14", "%7ld",
-__LINE__, 0xffffb89e,	"ffffb89e", "%+x",
-__LINE__, 0x01259918,	" 19241240", "% d",
-__LINE__, -0x0000f8d,	"-003981", "%+#.6d",
-__LINE__, 0x00054ae0,	"54AE0", "%X",
-__LINE__, -0x4589ed4,	"-72916692", "% ld",
-__LINE__, 0x01017516,	"1017516", "%6X",
-__LINE__, 0xfffb9f15,	"FFFB9F15", "%.2X",
-__LINE__, 0x005f8394,	"5F8394", "%.2X",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, -0x0000001,	"     -1", "%7.1ld",
-__LINE__, 0x004367af,	"4417455", "%4.ld",
-__LINE__, 0xffffff86,	"ffffff86", "%4.5x",
-__LINE__, -0x0000d17,	"-3351", "%2.0ld",
-__LINE__, 0xffffff31,	"ffffff31", "%.6x",
-__LINE__, -0x0000001,	"-1", "%ld",
-__LINE__, -0x3d785fab,	"-1031298987", "%d",
-__LINE__, -0x0000002,	"-2", "%-0ld",
-__LINE__, 0x0000019c,	"412", "%d",
-__LINE__, -0x0006f54,	"-28500", "%d",
-__LINE__, 0xfffe3524,	"FFFE3524", "% 6.2X",
-__LINE__, -0x128d3c00,	"-311245824", "%2d",
-__LINE__, -0x3be71293,	"-1004999315", "%d",
-__LINE__, 0x0000659d,	"26013", "%d",
-__LINE__, 0x2d947538,	"+764704056", "%+5d",
-__LINE__, 0xffa2a420,	"FFA2A420", "%0X",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0x04477c14,	"4477c14", "%.6x",
-__LINE__, -0x06e145b,	"-7214171", "%d",
-__LINE__, 0x00009c01,	"39937", "%-.1d",
-__LINE__, 0xffde174b,	"ffde174b", "% 0x",
-__LINE__, 0x0001fbae,	"1FBAE", "%01.X",
-__LINE__, -0x06b8406,	"-7046150", "%d",
-__LINE__, 0x000005b8,	"005b8", "%05x",
-__LINE__, -0x02d780b,	"-2979851", "%1d",
-__LINE__, 0x00209e26,	"2137638", "%2d",
-__LINE__, 0x0000041a,	"41A", "%0X",
-__LINE__, 0x2a77f42c,	"2A77F42C", "%02X",
-__LINE__, 0x13b6ee14,	"+330755604", "%+0d",
-__LINE__, -0x0000002,	"-2    ", "%-6.d",
-__LINE__, -0x0001eee,	"-7918", "% #2.ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "% .5X",
-__LINE__, 0x20d11927,	"20d11927", "% 0.x",
-__LINE__, -0x0018690,	"-99984", "% ld",
-__LINE__, 0x000002a0,	"2A0", "%-0X",
-__LINE__, -0x0000511,	"-1297", "%+d",
-__LINE__, 0x0e782f31,	"242757425", "%-0.ld",
-__LINE__, 0x2ce06da0,	"752905632", "%#0ld",
-__LINE__, 0x00000062,	"62     ", "%-07x",
-__LINE__, -0x015d9d8,	"-1432024", "% 7d",
-__LINE__, 0xc9125ea8,	"c9125ea8", "%x",
-__LINE__, 0x00000006,	"6", "%.0ld",
-__LINE__, 0x0000019c,	"19c", "%x",
-__LINE__, 0x00000000,	"      ", "%6.d",
-__LINE__, 0x00043e89,	"278153", "%0ld",
-__LINE__, 0x3e422abd,	"1044523709", "%ld",
-__LINE__, 0x0220a75d,	"35694429", "%#7.6d",
-__LINE__, 0x0000c21c,	"C21C", "% X",
-__LINE__, 0x000074ab,	"29867", "%d",
-__LINE__, 0x056b22aa,	"56B22AA", "%+0.X",
-__LINE__, 0xfffffff9,	"FFFFFFF9", "%X",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, 0xf094a4f4,	"f094a4f4", "%+4.x",
-__LINE__, -0x1dad0244,	"-497877572", "%d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%.1X",
-__LINE__, 0xfffffe2d,	"fffffe2d", "%7.x",
-__LINE__, 0x0000042b,	"0x42b", "%#x",
-__LINE__, -0x0000001,	"-1", "% d",
-__LINE__, 0x00e77ef5,	" 15171317", "% 7.ld",
-__LINE__, 0x00006210,	" 25104", "% 06d",
-__LINE__, 0x0011187a,	"1120378", "%-ld",
-__LINE__, -0x000000b,	"-11", "% #ld",
-__LINE__, 0x14cfaff0,	"14cfaff0", "%-2.3x",
-__LINE__, 0xffff74ea,	"FFFF74EA", "%3.X",
-__LINE__, 0x000bfb9d,	"bfb9d", "%x",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%X",
-__LINE__, 0x00014500,	"0X14500", "%#4.X",
-__LINE__, -0x0000001,	"-1", "%#1d",
-__LINE__, -0x0000024,	"-36", "%-0d",
-__LINE__, -0x6528828,	"-106072104", "%d",
-__LINE__, 0x00000075,	" 117", "% #d",
-__LINE__, 0xff027d67,	"ff027d67", "%0x",
-__LINE__, 0x0012b8b3,	"12b8b3", "%0.1x",
-__LINE__, 0x1070147b,	"275780731", "%.6ld",
-__LINE__, 0xffffe88e,	"FFFFE88E", "%1.3X",
-__LINE__, 0xfffffc0d,	"fffffc0d", "%00.6x",
-__LINE__, 0xffd889f5,	"ffd889f5", "%x",
-__LINE__, 0x00000470,	"1136", "%0ld",
-__LINE__, 0x000297f8,	"169976", "%ld",
-__LINE__, 0xfffffffe,	"fffffffe", "%+1x",
-__LINE__, 0x0000064a,	"64a", "%x",
-__LINE__, -0x3d71e43b,	"-1030874171", "%1.d",
-__LINE__, -0x0000004,	"-4 ", "%-3.d",
-__LINE__, 0xfffff132,	"FFFFF132", "%0.0X",
-__LINE__, 0x37b6356f,	"37b6356f", "%-x",
-__LINE__, 0xffffff7a,	"FFFFFF7A", "%.0X",
-__LINE__, 0x00023553,	"23553", "%x",
-__LINE__, 0x39a4c29f,	"39a4c29f", "%+5.x",
-__LINE__, 0xffffffcc,	"ffffffcc", "%x",
-__LINE__, 0x0003a83b,	"239675", "%#6ld",
-__LINE__, 0x00000002,	"2", "%0x",
-__LINE__, -0x09b4e8c,	"-10178188", "%+03.ld",
-__LINE__, 0x00000002,	"0000002", "%-#.7ld",
-__LINE__, 0x00000b5e,	"2910", "%-04ld",
-__LINE__, -0x0000254,	"-596", "%+0d",
-__LINE__, 0x00000001,	"1", "%+1.x",
-__LINE__, 0xf8290d3e,	"0XF8290D3E", "% #X",
-__LINE__, 0x00000035,	"035", "%3.3X",
-__LINE__, 0x00131d7d,	"131D7D ", "%-7.6X",
-__LINE__, 0xffdbb36a,	"0xffdbb36a", "%#.6x",
-__LINE__, 0xc7275816,	"c7275816", "%04.x",
-__LINE__, 0x00bae994,	"12249492", "%0ld",
-__LINE__, 0x00000002,	"+2", "%+0.0ld",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, 0xffffffe0,	"ffffffe0", "%x",
-__LINE__, 0x00000036,	"36", "%.0X",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%1X",
-__LINE__, 0xffffffc8,	"ffffffc8", "%+x",
-__LINE__, 0xe71c3689,	"e71c3689", "%x",
-__LINE__, 0x00000007,	"7  ", "%-3.ld",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, 0x00030400,	"030400", "%-4.6x",
-__LINE__, 0xbd8c6fa7,	"BD8C6FA7", "%-6X",
-__LINE__, 0x00000233,	"0000563", "%.7ld",
-__LINE__, 0xfef92e35,	"fef92e35", "%x",
-__LINE__, 0xffff2172,	"ffff2172", "%3x",
-__LINE__, 0x00001233,	"1233", "% X",
-__LINE__, -0x000d2e1,	"-53985", "%-0d",
-__LINE__, -0x3ba8cb5b,	"-1000917851", "%0d",
-__LINE__, -0x4fefb9a,	"-83819418", "%5.ld",
-__LINE__, 0xffffe9eb,	"FFFFE9EB", "%X",
-__LINE__, 0x1e472dc3,	"507981251", "%ld",
-__LINE__, -0x0077046,	"-487494", "%0d",
-__LINE__, 0x0002c4c9,	"+181449", "%+7.d",
-__LINE__, 0xfffffe63,	"fffffe63", "%x",
-__LINE__, 0xfff5a6db,	"FFF5A6DB", "%X",
-__LINE__, 0x00174442,	"174442", "%-5.0X",
-__LINE__, 0x017891d9,	"17891D9", "%+5.X",
-__LINE__, 0x0261966b,	"261966B", "%-X",
-__LINE__, -0x3e58614d,	"-1045979469", "%ld",
-__LINE__, 0x002c4c41,	"+2903105", "%+01ld",
-__LINE__, 0x0000000c,	"012", "%#.3d",
-__LINE__, 0x0380f73a,	"58783546", "%ld",
-__LINE__, 0x000002c7,	"0000711", "%2.7ld",
-__LINE__, 0x00000002,	" 002", "% 04ld",
-__LINE__, 0x00687ca0,	"687CA0", "%X",
-__LINE__, 0x0000058a,	"1418", "%0ld",
-__LINE__, -0x0000642,	"-1602", "% ld",
-__LINE__, 0x0001f4f1,	"1F4F1", "%X",
-__LINE__, 0x0026d6fc,	"+2545404", "%+4.ld",
-__LINE__, 0x05dd423c,	"+98386492", "%+#ld",
-__LINE__, 0x0000782c,	"0782C", "%3.5X",
-__LINE__, 0xf67d91f8,	"f67d91f8", "%-x",
-__LINE__, 0xffffcf2d,	"ffffcf2d", "%+0x",
-__LINE__, -0x00af8a6,	"-719014", "%0ld",
-__LINE__, -0xe606ef9,	"-241200889", "%ld",
-__LINE__, 0xfe9d87f7,	"fe9d87f7", "%+x",
-__LINE__, 0x00000d44,	"d44", "% 1.x",
-__LINE__, 0x008716f5,	"8716f5", "%2x",
-__LINE__, 0x000027d4,	"27D4", "% X",
-__LINE__, 0xfdfd92ea,	"FDFD92EA", "%-.4X",
-__LINE__, 0xfffe764f,	"FFFE764F", "%X",
-__LINE__, 0xff699032,	"ff699032", "%3.x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%-3X",
-__LINE__, -0x368ba995,	"-915122581", "%+#.6ld",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, 0x0000035e,	" 862", "% 1d",
-__LINE__, 0xfe703e67,	"fe703e67", "%07.0x",
-__LINE__, 0xfffffffe,	"fffffffe", "%4.x",
-__LINE__, 0x000e20cf,	"e20cf", "%0x",
-__LINE__, 0x000063b5,	"0X63B5", "%-#X",
-__LINE__, 0xfffffffa,	"fffffffa", "%+2.x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%2.X",
-__LINE__, 0xfdfd69da,	"FDFD69DA", "%.0X",
-__LINE__, 0x00002f61,	"0x2f61", "%#3.x",
-__LINE__, 0x00000009,	"9", "%x",
-__LINE__, 0xffffff86,	"ffffff86", "%6x",
-__LINE__, 0xffffffe4,	"ffffffe4", "%0x",
-__LINE__, 0x0062e73b,	"+6481723", "%+0ld",
-__LINE__, -0x2b059130,	"-721785136", "%+d",
-__LINE__, -0x0000073,	"-115", "%d",
-__LINE__, 0xf596efcf,	"f596efcf", "%x",
-__LINE__, 0x0002f1cb,	"2F1CB", "%0X",
-__LINE__, -0x0000635,	"-01589", "%.5ld",
-__LINE__, 0xfffa011a,	"FFFA011A", "%0X",
-__LINE__, 0x00000047,	"  47", "%4X",
-__LINE__, 0xfffffbc0,	"FFFFFBC0", "%5.2X",
-__LINE__, 0x00000015,	"15", "% X",
-__LINE__, 0x002a87a6,	"2a87a6", "%.1x",
-__LINE__, -0x000069c,	"-1692", "%+ld",
-__LINE__, 0xfffffffd,	"fffffffd", "%+x",
-__LINE__, 0xfeda51f5,	"FEDA51F5", "%0X",
-__LINE__, 0x001781a4,	"1781a4", "%-0x",
-__LINE__, 0xe77358d4,	"e77358d4", "%+0x",
-__LINE__, 0x00000084,	" 84", "%3.x",
-__LINE__, 0xffff0cb2,	"FFFF0CB2", "%+5.X",
-__LINE__, 0x0009fa17,	"653847", "%0.0ld",
-__LINE__, -0x0000c92,	"-3218", "%d",
-__LINE__, 0x0004ebbb,	"4ebbb", "%x",
-__LINE__, 0x2e72568c,	"+779245196", "%+#ld",
-__LINE__, 0xffae86a7,	"ffae86a7", "%.7x",
-__LINE__, 0xffdf3f04,	"ffdf3f04", "%x",
-__LINE__, 0x000000c7,	"199", "%2.d",
-__LINE__, -0x0004a55,	"-19029", "%ld",
-__LINE__, 0x00564ef9,	"5656313", "%.6ld",
-__LINE__, 0xffffc205,	"ffffc205", "%+.0x",
-__LINE__, -0x135085d0,	"-324044240", "%#.5d",
-__LINE__, 0xfffffffe,	"fffffffe", "%-7x",
-__LINE__, -0x0000003,	"-3", "%.1ld",
-__LINE__, 0xffda9e0b,	"ffda9e0b", "%+0x",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0xffffffda,	"ffffffda", "%.6x",
-__LINE__, 0x5efdb3d1,	"+1593684945", "%+0d",
-__LINE__, -0x00000ca,	"-202", "% 4.d",
-__LINE__, -0x0014433,	"-82995", "%.3d",
-__LINE__, -0x0000002,	"-000002", "% .6ld",
-__LINE__, 0x24aac879,	"615172217", "%.7d",
-__LINE__, -0x1db3c1d,	"-31144989", "%+#4ld",
-__LINE__, 0x000945ad,	"0x945ad", "%#1x",
-__LINE__, 0x0000000a,	"10", "%#.1ld",
-__LINE__, -0x002a2e5,	"-172773", "%d",
-__LINE__, 0xfffffff3,	"FFFFFFF3", "%5X",
-__LINE__, 0x0000000e,	"e", "%+x",
-__LINE__, 0x335333dc,	"861090780", "%6.d",
-__LINE__, 0xfffa16f4,	"FFFA16F4", "%6X",
-__LINE__, 0xffffc727,	"ffffc727", "%+2.x",
-__LINE__, 0x00000273,	"273", "%x",
-__LINE__, -0x000000f,	"-15", "%-0d",
-__LINE__, 0x00065fbd,	"417725", "%5.1d",
-__LINE__, 0x00000ed5,	"3797", "%d",
-__LINE__, 0x30a40024,	"30A40024", "%3.7X",
-__LINE__, 0x00000054,	"84", "%ld",
-__LINE__, 0x00000515,	"01301", "%.5ld",
-__LINE__, 0x00000897,	"+02199", "%+.5d",
-__LINE__, -0x0001bcc,	"-7116", "% ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%7X",
-__LINE__, 0x00000013,	"0X13", "%#X",
-__LINE__, 0xffffffff,	"0xffffffff", "% #x",
-__LINE__, 0x00000006,	"6", "%ld",
-__LINE__, -0x00000c3,	"-195", "%1.ld",
-__LINE__, -0x005291e,	"-338206", "%+d",
-__LINE__, 0xffb437a7,	"FFB437A7", "%-0X",
-__LINE__, 0xff8335cb,	"ff8335cb", "%x",
-__LINE__, 0x0000006a,	"6A", "%2X",
-__LINE__, -0x004f629,	"-325161", "% .4d",
-__LINE__, 0x003698ef,	"3578095", "%0ld",
-__LINE__, 0x6b5cdf3a,	"6b5cdf3a", "%-x",
-__LINE__, 0xe9bc5c21,	"e9bc5c21", "%+x",
-__LINE__, -0x0000001,	"    -1", "%+6.ld",
-__LINE__, 0xfffeffc8,	"FFFEFFC8", "%6.X",
-__LINE__, 0xff070a73,	"ff070a73", "%+.7x",
-__LINE__, 0x0023f8ae,	"2357422", "%07.4ld",
-__LINE__, 0x00000000,	"0", "%X",
-__LINE__, 0x00000016,	"16", "%0X",
-__LINE__, -0x000005a,	" -90", "%4d",
-__LINE__, 0x00000116,	"116", "% .3x",
-__LINE__, 0xfffed024,	"fffed024", "%-x",
-__LINE__, 0xfb907950,	"fb907950", "%.0x",
-__LINE__, 0x0101a1e5,	"101a1e5", "%x",
-__LINE__, -0x09e7684,	"-10385028", "%-#ld",
-__LINE__, 0xffffffff,	"ffffffff", "%1x",
-__LINE__, 0xfffffff6,	"fffffff6", "%x",
-__LINE__, 0x00000078,	"78", "%x",
-__LINE__, 0xe6bca9c9,	"0XE6BCA9C9", "%#.5X",
-__LINE__, -0x0000010,	"-16", "%d",
-__LINE__, -0x1348f685,	"-323548805", "%d",
-__LINE__, 0x4dd85797,	"1306023831", "%ld",
-__LINE__, -0x0000080,	"-128", "%.2d",
-__LINE__, -0xaed13a7,	"-183309223", "%+ld",
-__LINE__, -0x000002f,	"-47", "% d",
-__LINE__, -0x679911f,	"-108630303", "%ld",
-__LINE__, 0xfffff221,	"FFFFF221", "% .7X",
-__LINE__, 0x0007476c,	"7476c", "%x",
-__LINE__, 0xffffe02a,	"0xffffe02a", "%#7x",
-__LINE__, 0x00000ebb,	"0XEBB", "%#X",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%-#X",
-__LINE__, 0x00281896,	"281896", "%+1.x",
-__LINE__, 0x0000085d,	" 0X85D", "%#6.3X",
-__LINE__, 0x000112bf,	"112BF", "%X",
-__LINE__, 0xf5518fbf,	"F5518FBF", "% X",
-__LINE__, -0x00c945b,	"-824411", "%ld",
-__LINE__, 0x00001b43,	"0x1b43", "%-#x",
-__LINE__, -0x5872a246,	"-1483907654", "%#7.7ld",
-__LINE__, 0x00001f96,	"8086", "%#d",
-__LINE__, 0xfffffff9,	"FFFFFFF9", "%X",
-__LINE__, -0x006e244,	"-451140", "% .3d",
-__LINE__, -0x0382188,	"-3678600", "%0.2ld",
-__LINE__, 0x00000006,	"6", "%-x",
-__LINE__, 0x00000036,	"54   ", "%-5.d",
-__LINE__, -0x0000439,	" -1081", "%#6.3ld",
-__LINE__, 0xfff911c6,	"FFF911C6", "%X",
-__LINE__, -0x03454dc,	"-3429596", "%d",
-__LINE__, -0x0363e8d,	"-3554957", "%-.2ld",
-__LINE__, 0x00000000,	"000", "%.3X",
-__LINE__, -0x59bb030f,	"-1505428239", "%0ld",
-__LINE__, 0x073c94d8,	"121410776", "%-d",
-__LINE__, -0x001ef94,	"-126868", "%5.1ld",
-__LINE__, 0xfff65fc5,	"FFF65FC5", "%0X",
-__LINE__, 0xfffffff4,	"fffffff4", "%-x",
-__LINE__, 0x00001d83,	"07555", "%5.5d",
-__LINE__, 0x0012b40a,	"1225738", "%ld",
-__LINE__, -0x0000006,	"-6", "%0ld",
-__LINE__, 0xfffffffc,	"fffffffc", "%06.0x",
-__LINE__, -0x0000002,	"-00002", "%#.5ld",
-__LINE__, 0xf9932c1d,	"f9932c1d", "%-x",
-__LINE__, -0x46a31d9,	"-74068441", "%.3ld",
-__LINE__, 0x000987e9,	"987E9", "%1X",
-__LINE__, 0x0000000f,	"15", "%-ld",
-__LINE__, -0x0001c4d,	"-7245", "%ld",
-__LINE__, -0x007deee,	"-515822", "%2.6d",
-__LINE__, 0xffffffa2,	"FFFFFFA2", "%.6X",
-__LINE__, 0x00000001,	"1", "%-ld",
-__LINE__, 0xfc106bde,	"fc106bde", "%.4x",
-__LINE__, 0x0002f1f8,	"0x2f1f8", "%#7.x",
-__LINE__, -0x06a290b,	"-6957323", "%-ld",
-__LINE__, -0x0000037,	" -55", "%4ld",
-__LINE__, 0x0000152e,	"5422", "%2.d",
-__LINE__, 0xfffffcb2,	"0XFFFFFCB2", "%#3.X",
-__LINE__, 0x1b7ca086,	"1b7ca086", "%+x",
-__LINE__, 0x00000001,	"1", "%ld",
-__LINE__, 0x006775fc,	"6775fc", "%3.2x",
-__LINE__, 0x0000000e,	"0XE", "%#3.X",
-__LINE__, 0xffffffff,	"0xffffffff", "%+#4.x",
-__LINE__, 0x00001246,	"1246", "%X",
-__LINE__, 0xffffaed6,	"ffffaed6", "%2x",
-__LINE__, -0x3a2dec78,	"-976088184", "% 0ld",
-__LINE__, 0x0001423b,	"1423b", "%01x",
-__LINE__, 0x00000007,	" 0X7", "%#4.X",
-__LINE__, 0x01a7ff5a,	"27787098", "%.4ld",
-__LINE__, -0x0020d05,	"-134405", "%-d",
-__LINE__, 0xffffff9a,	"ffffff9a", "%-.1x",
-__LINE__, 0xffff3557,	"ffff3557", "%x",
-__LINE__, 0x08828e35,	"8828e35", "%+.1x",
-__LINE__, 0x000006b2,	"001714", "%04.6ld",
-__LINE__, 0x00000013,	"19", "%.0ld",
-__LINE__, -0x00341a5,	"-213413", "%#d",
-__LINE__, -0x0000043,	"-67", "%d",
-__LINE__, -0x074dce3,	"-7658723", "%.1d",
-__LINE__, -0x16de2df3,	"-383659507", "% ld",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0x00000ce7,	"ce7", "% 2.1x",
-__LINE__, 0xffecd377,	"ffecd377", "% 0x",
-__LINE__, 0xa4e8465c,	"a4e8465c", "% x",
-__LINE__, 0x000005e8,	"1512", "%d",
-__LINE__, 0x00000513,	"1299", "%d",
-__LINE__, 0xffffffb8,	"FFFFFFB8", "%X",
-__LINE__, 0x00000003,	"00003", "%3.5x",
-__LINE__, -0x0000003,	"-3 ", "%-3.ld",
-__LINE__, 0xad53f01d,	"ad53f01d", "%0x",
-__LINE__, 0x0f1c1dae,	"253500846", "%-#.0d",
-__LINE__, 0xff1753c0,	"0xff1753c0", "%#3.x",
-__LINE__, -0x00389c5,	"-231877", "%d",
-__LINE__, 0x0000016e,	"00016E", "%.6X",
-__LINE__, -0x54d3310f,	"-1423126799", "%-d",
-__LINE__, 0x00000005,	"0X5", "%#.1X",
-__LINE__, 0xfffffffd,	"0XFFFFFFFD", "%#5.3X",
-__LINE__, 0xfffffe0e,	"fffffe0e", "%-x",
-__LINE__, 0xa3c02157,	"a3c02157", "%.5x",
-__LINE__, 0x00005765,	"22373", "%d",
-__LINE__, -0x12668cd,	"-19294413", "%+ld",
-__LINE__, -0x66544da,	"-107300058", "%2d",
-__LINE__, 0x8646c605,	"0X8646C605", "% #X",
-__LINE__, 0x000001f5,	"1F5", "%X",
-__LINE__, 0x01b33ae4,	"28523236", "%5ld",
-__LINE__, 0x000007ce,	"7ce", "%3.x",
-__LINE__, 0x00000355,	"355", "%X",
-__LINE__, 0x000001ce,	"1CE", "% X",
-__LINE__, 0xfffffccd,	"fffffccd", "%7.0x",
-__LINE__, -0x0000001,	"-1", "%0ld",
-__LINE__, 0x000640b6,	"640b6", "%5.x",
-__LINE__, 0x0038c4ec,	"3720428", "%5.4d",
-__LINE__, -0x0f10b5e,	"-15797086", "%2ld",
-__LINE__, 0x256c815f,	"256c815f", "%4.x",
-__LINE__, 0x00000682,	"  1666", "%6ld",
-__LINE__, -0x00000ab,	"-171", "%2ld",
-__LINE__, 0x00000003,	"3", "%0d",
-__LINE__, 0x063f5075,	"63F5075", "%X",
-__LINE__, 0xff83b5d0,	"FF83B5D0", "%7.X",
-__LINE__, 0xffffffec,	"ffffffec", "%x",
-__LINE__, 0xffb551c4,	"0XFFB551C4", "% #4.X",
-__LINE__, -0x071f057,	"-7467095", "%3.7d",
-__LINE__, 0x00634879,	"6506617", "%#ld",
-__LINE__, 0x000001d7,	"471", "%d",
-__LINE__, 0x00a7da92,	"A7DA92", "% .4X",
-__LINE__, 0x00000003,	"3 ", "%-2.ld",
-__LINE__, -0x0000004,	"-0004", "%.4d",
-__LINE__, -0x01dea32,	"-1960498", "% #7.d",
-__LINE__, 0x53c4159f,	"53C4159F", "%1.7X",
-__LINE__, -0x1ad7904,	"-28145924", "%#d",
-__LINE__, -0x0000a85,	"-2693", "%ld",
-__LINE__, -0x0000c7d,	"-3197", "%d",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%+0X",
-__LINE__, 0x00000004,	"00004", "%1.5d",
-__LINE__, 0x0000b761,	"46945", "%5ld",
-__LINE__, -0x0ee3b2c,	"-15612716", "%.6d",
-__LINE__, 0x0677a73d,	"677a73d", "% x",
-__LINE__, -0x5f96020,	"-100229152", "% d",
-__LINE__, 0x00000000,	"      0", "%#7X",
-__LINE__, -0x5d1cb5b,	"-97635163", "% ld",
-__LINE__, -0x00a8d8b,	"-691595", "%-0ld",
-__LINE__, 0xffffffa2,	"FFFFFFA2", "%X",
-__LINE__, 0xffffffc9,	"FFFFFFC9", "%X",
-__LINE__, 0x0b180d35,	"B180D35", "%X",
-__LINE__, 0xfc0b94ce,	"fc0b94ce", "%.1x",
-__LINE__, 0x0012cd7b,	"12CD7B", "% X",
-__LINE__, -0x02f1da8,	"-3087784", "%ld",
-__LINE__, -0x000a6f9,	"-42745", "%-ld",
-__LINE__, -0x000006d,	"-109  ", "%-6d",
-__LINE__, 0x00000001,	"+1", "%+0d",
-__LINE__, 0x00000001,	"1", "%1d",
-__LINE__, 0xfffffff8,	"fffffff8", "%5.x",
-__LINE__, -0x00fc4d7,	"-1033431", "%+0.5ld",
-__LINE__, 0xffff41b4,	"0xffff41b4", "%#x",
-__LINE__, -0x0000d37,	"-3383", "%ld",
-__LINE__, 0xffc4e405,	"ffc4e405", "%7x",
-__LINE__, 0xffffffb0,	"FFFFFFB0", "%04X",
-__LINE__, -0x0054477,	"-345207", "%01.ld",
-__LINE__, 0x00512778,	"0x512778", "%#3.0x",
-__LINE__, 0x00000007,	"      7", "%7.d",
-__LINE__, 0x00000008,	" 00008", "% .5ld",
-__LINE__, 0x000053fd,	"21501", "%.4ld",
-__LINE__, 0x0000370c,	"370c", "%2x",
-__LINE__, -0x44670a7,	"-71725223", "%3d",
-__LINE__, 0x00000064,	"   64", "%+5x",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%X",
-__LINE__, 0xf7bbf094,	"f7bbf094", "%3x",
-__LINE__, 0xfffeb268,	"FFFEB268", "%X",
-__LINE__, 0x00001ef0,	"1ef0", "%4.x",
-__LINE__, 0x05ad9aa4,	" 95263396", "% 0.ld",
-__LINE__, 0xf294dca7,	"F294DCA7", "% 4.X",
-__LINE__, -0x0000003,	"-000003", "%.6d",
-__LINE__, 0xfff57471,	"fff57471", "% x",
-__LINE__, 0x0a848cfd,	"176459005", "%d",
-__LINE__, -0x000002e,	"-46", "%.0d",
-__LINE__, 0x00000051,	"  +81", "%+5d",
-__LINE__, -0x000072b,	"-0001835", "%06.7d",
-__LINE__, -0x0000002,	"    -2", "%+#6ld",
-__LINE__, 0x00000003,	"3", "%x",
-__LINE__, 0xfffd1799,	"FFFD1799", "%6.X",
-__LINE__, 0x00000005,	"5", "%ld",
-__LINE__, 0x0052138b,	"5378955", "%#7.7ld",
-__LINE__, 0x000000c0,	"    192", "% 7ld",
-__LINE__, 0x005b26cd,	"5B26CD", "%X",
-__LINE__, -0x008df17,	"-581399", "%.4ld",
-__LINE__, 0xfffffad8,	"fffffad8", "%-x",
-__LINE__, 0x000006a9,	"6a9", "%.0x",
-__LINE__, -0x003b7f9,	"-243705", "%+0ld",
-__LINE__, 0x005d7ea4,	"6127268", "%ld",
-__LINE__, -0x003ccea,	"-249066", "%+.0ld",
-__LINE__, 0x0000846f,	"846F", "%X",
-__LINE__, 0x00004f79,	"4F79", "%4.X",
-__LINE__, 0xe3e1409c,	"E3E1409C", "%-X",
-__LINE__, 0x07cce2f4,	"7CCE2F4", "%2.X",
-__LINE__, 0x004bcc8b,	"4967563", "%-.5ld",
-__LINE__, 0x7d49665e,	"2101962334", "%ld",
-__LINE__, 0xfffffffc,	"FFFFFFFC", "%.5X",
-__LINE__, 0x0000019e,	"+000414", "%+.6d",
-__LINE__, 0x000027ef,	"10223", "%d",
-__LINE__, -0x0000261,	"-609", "%3ld",
-__LINE__, -0x000000e,	"-14", "% 2.ld",
-__LINE__, 0xff3ba3c7,	"ff3ba3c7", "%+5.7x",
-__LINE__, 0xffffffc4,	"FFFFFFC4", "%-1.X",
-__LINE__, 0xfffc5a70,	"0xfffc5a70", "%#4.4x",
-__LINE__, 0x0000d156,	" 53590", "% d",
-__LINE__, -0x0486258,	"-4743768", "%0ld",
-__LINE__, 0x00000000,	"  ", "% 2.d",
-__LINE__, 0x04a0ef9f,	"77655967", "%0.6ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, 0x00000019,	"0000019", "%.7x",
-__LINE__, -0x0058d3a,	"-363834", "%ld",
-__LINE__, 0xfffff6b3,	"fffff6b3", "%x",
-__LINE__, 0xfffffff5,	"FFFFFFF5", "%.0X",
-__LINE__, 0x005e1fcb,	"5E1FCB", "%+6X",
-__LINE__, 0xffc3c866,	"0xffc3c866", "%-#.4x",
-__LINE__, 0x00000003,	"3", "%X",
-__LINE__, 0xffa2e961,	"FFA2E961", "%7.4X",
-__LINE__, 0x00000029,	"41", "%d",
-__LINE__, -0x0000035,	"-53", "%d",
-__LINE__, 0x0001b033,	"110643", "%ld",
-__LINE__, 0x004dd51b,	"5100827", "%-2ld",
-__LINE__, -0x000252d,	"-9517", "% d",
-__LINE__, 0xffffdeb2,	"ffffdeb2", "%4.x",
-__LINE__, 0xffe94eab,	"0xffe94eab", "%#x",
-__LINE__, 0xf921edf6,	"f921edf6", "%4.2x",
-__LINE__, 0x0007df97,	"515991", "%4.ld",
-__LINE__, 0x00709bc5,	"709BC5", "%0X",
-__LINE__, -0x0000001,	"-1", "%d",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%7.3X",
-__LINE__, -0x0063f74,	"-409460", "%+05.0d",
-__LINE__, 0xfffffe9a,	"FFFFFE9A", "%.2X",
-__LINE__, -0x0001ce2,	"-7394", "%.4d",
-__LINE__, 0x000038c5,	"14533", "%ld",
-__LINE__, 0x000000ad,	"000ad", "% 5.5x",
-__LINE__, 0xffffbcc4,	"ffffbcc4", "%-5x",
-__LINE__, 0x00000000,	"0", "% X",
-__LINE__, 0x00372877,	"372877", "%.6X",
-__LINE__, 0xffffffd7,	"FFFFFFD7", "%1.X",
-__LINE__, 0xfa58b14b,	"fa58b14b", "%x",
-__LINE__, 0xfffffd9f,	"FFFFFD9F", "%0.7X",
-__LINE__, 0x00000710,	"+1808", "%+#.2ld",
-__LINE__, 0x00000006,	"    6", "%5.0ld",
-__LINE__, 0x0fba9706,	"263886598", "%-6.3d",
-__LINE__, 0xffff420a,	"ffff420a", "%-2x",
-__LINE__, 0x14b9a825,	"14b9a825", "%x",
-__LINE__, 0x0077ffe4,	"77FFE4", "%+.2X",
-__LINE__, 0x00067108,	"422152 ", "%-7.ld",
-__LINE__, 0x00000001,	" 00001", "%6.5X",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, -0x0000001,	"     -1", "% 7ld",
-__LINE__, 0x01ddc7a3,	"31311779", "%d",
-__LINE__, -0x2a92f9b,	"-44642203", "% 3ld",
-__LINE__, 0xfffffff9,	"fffffff9", "%4.6x",
-__LINE__, 0x0279a274,	"279a274", "%x",
-__LINE__, 0x2e37ed8e,	"775417230", "%d",
-__LINE__, 0x5ba59f58,	"1537580888", "%-ld",
-__LINE__, 0xffffffe0,	"ffffffe0", "%x",
-__LINE__, 0x3110ae47,	"0X3110AE47", "%+#X",
-__LINE__, 0x000e00b9,	"917689", "%d",
-__LINE__, 0x0000002e,	"   0046", "% 7.4d",
-__LINE__, 0x00000363,	"    867", "%7.d",
-__LINE__, -0x000000b,	"-0011", "% 0.4d",
-__LINE__, 0x000349c8,	"  349C8", "% 7.X",
-__LINE__, -0x01358f1,	"-1267953", "%d",
-__LINE__, -0x0039d3c,	"-236860", "%-.3d",
-__LINE__, 0xffd6de19,	"ffd6de19", "%04.0x",
-__LINE__, -0x0003c54,	"-0015444", "%1.7d",
-__LINE__, -0x0000e17,	"-3607", "%d",
-__LINE__, 0xff0fa3a9,	"ff0fa3a9", "%+3x",
-__LINE__, 0x00000009,	"0000009", "%1.7x",
-__LINE__, 0xfffffc81,	"FFFFFC81", "% X",
-__LINE__, -0x4ef2df5,	"-82783733", "%ld",
-__LINE__, 0x00000013,	"19", "%-ld",
-__LINE__, 0x00000000,	"      0", "%#7x",
-__LINE__, -0x3b9485fd,	"-999589373", "%1.d",
-__LINE__, -0x0000006,	"-00006", "%6.5d",
-__LINE__, 0x0000003f,	"+63", "%+ld",
-__LINE__, 0x000004c5,	"1221", "%1.d",
-__LINE__, 0x003f8a8c,	"4164236", "%d",
-__LINE__, -0x000001e,	"-30", "%-#3d",
-__LINE__, 0xfff9d230,	"FFF9D230", "%+07.3X",
-__LINE__, 0x0147cf17,	"147cf17", "% x",
-__LINE__, 0xffffffeb,	"ffffffeb", "%x",
-__LINE__, 0x0000007d,	"00125", "%.5ld",
-__LINE__, 0x000fff56,	"1048406", "%#3d",
-__LINE__, 0x064307a0,	" 105056160", "% 0.3ld",
-__LINE__, 0x007d2860,	"8202336", "%-.2d",
-__LINE__, 0x00a05711,	"a05711", "%x",
-__LINE__, 0x179a7f9e,	"0x179a7f9e", "%+#.3x",
-__LINE__, 0x00000003,	"3", "%X",
-__LINE__, -0x0001d7d,	"-7549", "%#5d",
-__LINE__, 0x0025d3f2,	"+2479090", "%+2.d",
-__LINE__, -0x0000001,	"-1", "%#ld",
-__LINE__, 0xfffffdd5,	"fffffdd5", "%.7x",
-__LINE__, 0x003462b9,	"3433145", "%d",
-__LINE__, 0x00005a81,	"23169", "%d",
-__LINE__, 0xfffffcdb,	"fffffcdb", "%-x",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0xfff22085,	"fff22085", "%x",
-__LINE__, 0x00016d72,	" 93554", "% d",
-__LINE__, -0x0000002,	"-2", "%0ld",
-__LINE__, 0xfffffd21,	"fffffd21", "% 0x",
-__LINE__, 0x00000931,	"2353", "%ld",
-__LINE__, 0x00010021,	"10021", "%5.1X",
-__LINE__, -0x000007e,	"-126", "%1.0ld",
-__LINE__, 0xfffffff8,	"fffffff8", "%01.x",
-__LINE__, -0x001d148,	"-119112", "%d",
-__LINE__, -0x0000008,	"-8", "%ld",
-__LINE__, -0x000038e,	"-910", "% ld",
-__LINE__, 0x0039e3e5,	"3793893", "%0.1d",
-__LINE__, 0x0038fb8e,	"38FB8E", "%.2X",
-__LINE__, -0x002dafa,	"-187130", "%ld",
-__LINE__, -0xbec275b,	"-200025947", "%ld",
-__LINE__, 0x1a32f999,	"1A32F999", "%05.4X",
-__LINE__, 0x0000002f,	"2f", "%x",
-__LINE__, -0x0001a5b,	"-6747", "%+3.ld",
-__LINE__, 0x00000762,	"   1890", "%7.ld",
-__LINE__, 0x000000c2,	"000194", "%0.6ld",
-__LINE__, 0xffff002b,	"FFFF002B", "%.4X",
-__LINE__, -0x0019dae,	"-105902", "% .2d",
-__LINE__, 0x0000125f,	"125f", "%+1x",
-__LINE__, -0x000b688,	" -46728", "%#7.d",
-__LINE__, 0x000401ca,	"401ca", "%0x",
-__LINE__, 0x00000192,	"402", "%#ld",
-__LINE__, 0xffffffff,	"ffffffff", "%x",
-__LINE__, 0x1e505a0c,	"0X1E505A0C", "%#1.3X",
-__LINE__, 0x000f8f6c,	"1019756", "%d",
-__LINE__, 0x0004a296,	"4a296", "%5.2x",
-__LINE__, 0x00000003,	"3", "% x",
-__LINE__, -0x000d44c,	"-54348", "%#ld",
-__LINE__, 0x00009ae2,	"39650", "%-d",
-__LINE__, 0xffffff3a,	"FFFFFF3A", "% .7X",
-__LINE__, 0x0042350b,	"4338955", "%d",
-__LINE__, 0x000071af,	"71af", "%+.4x",
-__LINE__, 0x00000001,	"0x1", "%#0x",
-__LINE__, 0x00000033,	"00051", "%3.5d",
-__LINE__, 0x00000001,	"1", "%X",
-__LINE__, -0xebfb0e7,	"-247443687", "%+3ld",
-__LINE__, 0x00000027,	"27     ", "%-07.X",
-__LINE__, -0x0004837,	"-18487", "%01d",
-__LINE__, 0x1a8c53da,	"1A8C53DA", "%X",
-__LINE__, -0x0bdb8a9,	"-12433577", "%d",
-__LINE__, -0x0000098,	"-152", "%#ld",
-__LINE__, -0x003b554,	"-243028", "%d",
-__LINE__, 0x000000cb,	"00000CB", "%+.7X",
-__LINE__, 0xfffffeda,	"FFFFFEDA", "%X",
-__LINE__, -0x0000010,	"-16", "%-#d",
-__LINE__, 0x00000006,	"+6", "%+d",
-__LINE__, 0x003c294a,	"+3942730", "%+4.ld",
-__LINE__, 0x00000009,	"9", "%ld",
-__LINE__, 0xfbbdd2bc,	"FBBDD2BC", "% X",
-__LINE__, 0x71c86678,	"+1908958840", "%+0.6ld",
-__LINE__, -0x0b49bff,	"-11836415", "% 6.ld",
-__LINE__, 0xfff416be,	"fff416be", "%3.x",
-__LINE__, 0x00000077,	"+119", "%+d",
-__LINE__, 0xfff1cfaa,	"FFF1CFAA", "% 0.2X",
-__LINE__, 0xfffffffb,	"fffffffb", "% x",
-__LINE__, 0x0000127e,	"4734", "%d",
-__LINE__, 0x00107ad2,	"107ad2", "%+2.6x",
-__LINE__, 0x0006b8e9,	"440553", "%-#d",
-__LINE__, 0x0000eb6f,	"eb6f", "% x",
-__LINE__, 0x00001f18,	"7960", "%0d",
-__LINE__, 0xfffff225,	"fffff225", "%1.5x",
-__LINE__, 0xfffffff9,	"fffffff9", "%+6.x",
-__LINE__, 0x000005b9,	"01465", "%.5ld",
-__LINE__, 0xfffc26b8,	"FFFC26B8", "% X",
-__LINE__, 0x540d580d,	"0X540D580D", "%+#X",
-__LINE__, 0x05ad7094,	"5AD7094", "% 4.7X",
-__LINE__, -0x000019b,	"-411", "% d",
-__LINE__, 0x00000006,	"000006", "%6.6ld",
-__LINE__, 0x0000026a,	"+618", "%+ld",
-__LINE__, 0x0000000b,	"11", "%ld",
-__LINE__, -0x26985d5,	"-40469973", "%#.0ld",
-__LINE__, 0x0000007d,	"7D", "%+02.0X",
-__LINE__, -0x0079ddf,	"-0499167", "%+.7ld",
-__LINE__, 0x0000375f,	"14175", "%0d",
-__LINE__, -0x18de7f99,	"-417234841", "%ld",
-__LINE__, -0x00507cc,	"-329676", "%.0d",
-__LINE__, 0x000029d5,	"29D5", "%-2.1X",
-__LINE__, 0x0000328c,	"328C", "%-3.X",
-__LINE__, 0x016f6234,	"24076852", "%3.ld",
-__LINE__, 0xfffffffc,	"0XFFFFFFFC", "%#.5X",
-__LINE__, 0xfe6163ca,	"FE6163CA", "%5.X",
-__LINE__, 0xffffffc2,	"FFFFFFC2", "%X",
-__LINE__, 0x00000087,	"+135", "%+ld",
-__LINE__, 0x00310166,	"310166", "% x",
-__LINE__, 0x00e8c871,	"15255665", "%d",
-__LINE__, 0x000005ee,	"1518", "%ld",
-__LINE__, 0xfcb24306,	"FCB24306", "%X",
-__LINE__, 0x0000000b,	"   11", "%5ld",
-__LINE__, 0x006d11d0,	"0x6d11d0", "%#.0x",
-__LINE__, 0x0010d416,	"1102870", "%#6.5d",
-__LINE__, -0x0047cb3,	"-294067", "%.3d",
-__LINE__, 0x000000c0,	"c0", "%x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%+X",
-__LINE__, -0x000000a,	"-10", "%d",
-__LINE__, -0x0000007,	"-7", "% ld",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "%-X",
-__LINE__, 0x00000014,	"0x14", "%-#3.1x",
-__LINE__, 0x00003319,	"3319", "% x",
-__LINE__, 0x00000000,	"00", "%+#.2X",
-__LINE__, -0x0000009,	"-9", "% ld",
-__LINE__, -0x0000001,	"-1 ", "%-3ld",
-__LINE__, 0x00262909,	"2500873", "%.5ld",
-__LINE__, 0x33e76560,	"33e76560", "%7.0x",
-__LINE__, -0x0000002,	"-2", "%ld",
-__LINE__, 0x00035ee9,	"35EE9", "%-3.X",
-__LINE__, -0x0000235,	"-565", "%+4.ld",
-__LINE__, -0x3ea63c5,	"-65692613", "%d",
-__LINE__, 0x00000003,	"3", "%ld",
-__LINE__, -0x003362f,	"-210479", "% d",
-__LINE__, -0x1a819f8a,	"-444702602", "%.7d",
-__LINE__, 0x027a4668,	"41567848", "%d",
-__LINE__, 0x0002b025,	"2b025", "%x",
-__LINE__, -0x0000001,	"-001", "%.3ld",
-__LINE__, 0xfffffff0,	"fffffff0", "%-0x",
-__LINE__, -0x0000d4f,	"-3407", "%-ld",
-__LINE__, 0x00000146,	" 326", "% 1.d",
-__LINE__, -0x0000006,	"-6", "%d",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%06.4X",
-__LINE__, 0x376fddae,	"+930078126", "%+#0ld",
-__LINE__, 0x006d9da3,	"6d9da3", "%1.x",
-__LINE__, -0x0000f28,	"-3880", "%3.2ld",
-__LINE__, 0x0006962c,	" 431660", "% 5d",
-__LINE__, 0x000011db,	"  4571", "%6.ld",
-__LINE__, 0xffffffa8,	"ffffffa8", "%+x",
-__LINE__, 0x0d886db3,	"D886DB3", "%.7X",
-__LINE__, 0x00000000,	"000000", "%2.6ld",
-__LINE__, 0xfffff6b6,	"FFFFF6B6", "% X",
-__LINE__, -0x0739068,	"-7573608", "%+6.ld",
-__LINE__, 0xfba62553,	"0XFBA62553", "%#X",
-__LINE__, -0x4474bc5,	"-71781317", "%-2ld",
-__LINE__, 0xffffff95,	"FFFFFF95", "% 2.X",
-__LINE__, -0x1d0e1ca,	"-30466506", "%+.0d",
-__LINE__, -0x000f3aa,	"-62378", "%ld",
-__LINE__, 0x00000026,	"26", "%1x",
-__LINE__, 0x001c5400,	"1856512", "%-#d",
-__LINE__, 0x03808442,	"3808442", "%X",
-__LINE__, -0x0000081,	"-129", "%+#ld",
-__LINE__, 0x000004ae,	" 1198", "% 3.4d",
-__LINE__, -0x7f4ed54,	"-133492052", "%d",
-__LINE__, 0x00000000,	"+0", "%+ld",
-__LINE__, 0x00000000,	"0", "%+x",
-__LINE__, 0x004c7e46,	"5013062", "%.0d",
-__LINE__, -0x647d7a65,	"-1685944933", "%0.2d",
-__LINE__, 0x00003b59,	"15193", "%-#1d",
-__LINE__, 0xfff3e64d,	"FFF3E64D", "%-X",
-__LINE__, 0x00007022,	"28706", "%-d",
-__LINE__, 0xc28d0ad8,	"c28d0ad8", "%+x",
-__LINE__, -0x005c208,	"-377352", "% ld",
-__LINE__, 0x00cfbadc,	"13613788", "%d",
-__LINE__, 0x000016ea,	"5866", "%0d",
-__LINE__, 0x00000029,	"29", "%X",
-__LINE__, 0xffe16813,	"0XFFE16813", "%+#X",
-__LINE__, 0x00000004,	"4", "%0X",
-__LINE__, -0x0000096,	" -150", "%5d",
-__LINE__, 0x00027ac7,	"162503", "%ld",
-__LINE__, -0x0075de0,	"-482784", "%d",
-__LINE__, 0x005fcff6,	"6279158", "%d",
-__LINE__, 0xffffffef,	"FFFFFFEF", "%3X",
-__LINE__, 0x267b05ec,	"645596652", "%4ld",
-__LINE__, 0xa487b724,	"a487b724", "%x",
-__LINE__, 0x01da2a11,	"31074833", "%-.0ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, 0x0000037a,	"37a", "%x",
-__LINE__, 0x003d0314,	"+3998484", "%+#1d",
-__LINE__, 0x0000011b,	"  283", "%5.2d",
-__LINE__, 0x094f6066,	"94f6066", "%x",
-__LINE__, 0x00000004,	"4", "%X",
-__LINE__, -0x102e14bd,	"-271455421", "% 7.ld",
-__LINE__, 0x000048da,	"0018650", "%07ld",
-__LINE__, -0x24ae0390,	"-615383952", "%0.6d",
-__LINE__, 0xffff5159,	"0XFFFF5159", "%#0X",
-__LINE__, 0xfffd38c3,	"fffd38c3", "%x",
-__LINE__, 0xfffff9ea,	"FFFFF9EA", "%-X",
-__LINE__, -0x000fd28,	"-64808", "% ld",
-__LINE__, 0x002c1bf4,	"2890740", "%-.1d",
-__LINE__, 0x00d00ee7,	"D00EE7", "%0.4X",
-__LINE__, 0x00000cf9,	"3321", "%0d",
-__LINE__, -0x0000001,	"-1", "%-#ld",
-__LINE__, 0xfffffd75,	"FFFFFD75", "%.2X",
-__LINE__, 0x00000012,	"18", "%-d",
-__LINE__, 0xfd44b4b2,	"fd44b4b2", "%+5.x",
-__LINE__, -0x001c53f,	"-116031", "%-#6.d",
-__LINE__, 0x000ff6fd,	"ff6fd", "%2x",
-__LINE__, 0x00000001,	"1", "%0d",
-__LINE__, 0x0120b478,	"120B478", "%.7X",
-__LINE__, 0x0145591e,	"145591E", "%1.4X",
-__LINE__, 0x001f99b9,	"1F99B9", "%.1X",
-__LINE__, 0xffffd078,	"ffffd078", "%-1.5x",
-__LINE__, 0xffffff1a,	"FFFFFF1A", "%-4.6X",
-__LINE__, 0xfffffffa,	"fffffffa", "%x",
-__LINE__, -0x00000b9,	"-185", "%3ld",
-__LINE__, 0x00001cf0,	"7408", "%-ld",
-__LINE__, 0xffffffff,	"FFFFFFFF", "%X",
-__LINE__, 0x00151f30,	"151F30", "%X",
-__LINE__, -0x0000103,	"-259", "%d",
-__LINE__, -0x000303f,	"-12351", "%d",
-__LINE__, 0x000002ca,	"714", "%ld",
-__LINE__, -0x0000c55,	"-3157", "%1d",
-__LINE__, 0x00000691,	"01681", "%#.5ld",
-__LINE__, 0x00230537,	"2295095", "%#d",
-__LINE__, 0x032a1faa,	"53092266", "%.4d",
-__LINE__, 0x000050d7,	"20695", "%d",
-__LINE__, -0x0c7ad4c,	"-13086028", "%#.4ld",
-__LINE__, -0x00009d9,	"-2521", "%+d",
-__LINE__, 0xfffffffe,	"fffffffe", "%0x",
-__LINE__, 0xffdec2d9,	"FFDEC2D9", "%5.1X",
-__LINE__, -0x000563c,	"-22076", "%-.2ld",
-__LINE__, 0x0073b36a,	"0x73b36a", "%-#x",
-__LINE__, 0xfffffffd,	"fffffffd", "%x",
-__LINE__, 0x0193ba5a,	"193ba5a", "%1.x",
-__LINE__, 0x00d147b5,	"13715381", "%2.d",
-__LINE__, 0xffffff10,	"ffffff10", "%4x",
-__LINE__, 0x000648d5,	"648d5", "%1.3x",
-__LINE__, 0x00000011,	"11", "%X",
-__LINE__, 0xff259f5b,	"0xff259f5b", "% #.1x",
-__LINE__, 0x00000175,	"175", "%x",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, 0x00000015,	"21", "%#ld",
-__LINE__, 0xfffffffe,	"fffffffe", "%-x",
-__LINE__, 0x00000013,	" 19", "% 0ld",
-__LINE__, -0x0000001,	"-0000001", "% 5.7ld",
-__LINE__, 0x0000139d,	"139D", "%X",
-__LINE__, 0x0041ad18,	"41ad18", "%-.6x",
-__LINE__, -0x00000f9,	"-249", "% 3.d",
-__LINE__, 0x00000076,	"118", "%ld",
-__LINE__, 0x000006f8,	"1784", "%d",
-__LINE__, -0x0000005,	"-5", "%ld",
-__LINE__, -0x00008e7,	"-2279", "%+ld",
-__LINE__, 0x00003f77,	"3F77", "%+0X",
-__LINE__, 0x000ca3f8,	"0XCA3F8", "%+#X",
-__LINE__, -0x00004bf,	"-001215", "%#5.6ld",
-__LINE__, 0x319129ab,	"0x319129ab", "%+#x",
-__LINE__, -0x0000002,	"-2", "%ld",
-__LINE__, -0x0f6686e,	"-16148590", "%.6ld",
-__LINE__, 0x0329576b,	"53041003", "%2.d",
-__LINE__, -0x000179e,	"-6046", "%d",
-__LINE__, 0x000002cc,	"+716", "%+1.3ld",
-__LINE__, 0xfffffff7,	"0xfffffff7", "% #x",
-__LINE__, 0x0016eb40,	"1502016", "%ld",
-__LINE__, 0x00000003,	"3", "%-0ld",
-__LINE__, 0x0023e0d6,	"23E0D6", "%-05.X",
-__LINE__, 0xffffa6a4,	"0XFFFFA6A4", "%#X",
-__LINE__, 0x00087664,	"87664", "% .2x",
-__LINE__, -0x0000002,	" -2", "%3.ld",
-__LINE__, 0x003ad85d,	"3AD85D", "%X",
-__LINE__, 0x00002f20,	"12064", "%ld",
-__LINE__, 0x02030bfc,	"2030BFC", "%02.3X",
-__LINE__, 0xfffff36a,	"FFFFF36A", "%X",
-__LINE__, 0xfe0729ff,	"0xfe0729ff", "% #.0x",
-__LINE__, 0xfec15164,	"FEC15164", "%0.2X",
-__LINE__, -0x00169ec,	"-92652", "%+d",
-__LINE__, 0x006d7990,	"0x6d7990", "%#x",
-__LINE__, 0xffcc89e6,	"ffcc89e6", "%x",
-__LINE__, 0x002d7cca,	"2981066", "%7.7ld",
-__LINE__, -0x1649692b,	"-373909803", "%#ld",
-__LINE__, 0x00664f47,	"664f47", "%+6.x",
-__LINE__, 0x00000000,	"0", "% X",
-__LINE__, 0x00000047,	"000047", "%.6X",
-__LINE__, 0x00000007,	"0000007", "%.7ld",
-__LINE__, 0x00000030,	"30", "%-x",
-__LINE__, -0x25bcbabb,	"-633125563", "% ld",
-__LINE__, 0xfe11c031,	"FE11C031", "%4.6X",
-__LINE__, -0x0000001,	"-0000001", "%.7d",
-__LINE__, 0x00b56d84,	"11890052", "%ld",
-__LINE__, -0x0000b01,	"-0002817", "%+07.7ld",
-__LINE__, 0xffffe4ad,	"ffffe4ad", "% 0.0x",
-__LINE__, 0x007760fc,	"7760fc", "%+x",
-__LINE__, 0xffef44d8,	"FFEF44D8", "%X",
-__LINE__, 0xfcb6862e,	"fcb6862e", "%+x",
-__LINE__, -0x0000001,	"-1", "%0d",
-__LINE__, 0xffffffe6,	"FFFFFFE6", "%3.1X",
-__LINE__, 0xff816e27,	"FF816E27", "% 6.X",
-__LINE__, 0x00006415,	"25621", "%ld",
-__LINE__, -0xfae5449,	"-263083081", "%0ld",
-__LINE__, 0x00000001,	" 1", "% 0d",
-__LINE__, 0x00000009,	" 9", "%2.X",
-__LINE__, 0x002d7e18,	"2981400", "%7d",
-__LINE__, -0x00000fc,	"-0000252", "%-#.7d",
-__LINE__, 0x00000003,	"3", "%0x",
-__LINE__, 0x0d46e47f,	"222749823", "%ld",
-__LINE__, 0xfffcbc52,	"FFFCBC52", "%+X",
-__LINE__, 0x00000000,	"0", "%-X",
-__LINE__, 0xfffff0e5,	"fffff0e5", "%x",
-__LINE__, 0xffffffd9,	"FFFFFFD9", "%07X",
-__LINE__, 0x000004ee,	"4ee", "%0x",
-__LINE__, 0xffffffff,	"ffffffff", "%0x",
-__LINE__, -0x0008cb4,	"-036020", "%+3.6ld",
-__LINE__, 0x0000dada,	"0xdada", "%#0.x",
-__LINE__, 0x0000001a,	"26  ", "%-4d",
-__LINE__, -0x000000c,	" -12", "%04.d",
-__LINE__, 0x0000025c,	"    25c", "%7.x",
-__LINE__, 0xfe9b091e,	"FE9B091E", "%X",
-__LINE__, 0x00000002,	"      2", "%07.ld",
-__LINE__, -0x0004930,	"-18736", "% 6.d",
-__LINE__, 0xffffffe9,	"FFFFFFE9", "%X",
-__LINE__, 0x00000003,	" 3", "%2.ld",
-__LINE__, 0x00000e00,	"3584", "%.4d",
-__LINE__, 0xffff38c2,	"ffff38c2", "%0.x",
-__LINE__, 0xffffffff,	"FFFFFFFF", "% .3X",
-__LINE__, 0xff7c1b2f,	"FF7C1B2F", "%-3.2X",
-__LINE__, -0x0000005,	"-5", "%2d",
-__LINE__, 0x00098775,	"98775", "%x",
-__LINE__, 0x000015ff,	"  15FF", "%6.X",
-__LINE__, 0xfffbe3ef,	"FFFBE3EF", "%0.3X",
-__LINE__, -0x0000048,	"-72", "%ld",
-__LINE__, 0x0001488a,	"84106", "%d",
-__LINE__, 0x00000001,	"1", "%x",
-__LINE__, -0x0000002,	"-2", "%-0.0ld",
-__LINE__, -0x0000001,	"-1", "%-d",
-__LINE__, 0x0006616f,	"6616f", "%x",
-__LINE__, 0x3657856d,	"911705453", "%6.d",
-__LINE__, -0x0007222,	"-0029218", "%.7d",
-__LINE__, 0x00041606,	"267782", "%04.5d",
-__LINE__, 0x00000001,	" 1", "%2.ld",
-__LINE__, 0x00000219,	"219", "%0x",
-__LINE__, 0x0ae0184c,	"ae0184c", "%x",
-__LINE__, 0x00003a7d,	"  14973", "%7.ld",
-__LINE__, 0xffffffff,	"0XFFFFFFFF", "%#X",
-__LINE__, -0x0000002,	"-2", "%0ld",
-__LINE__, 0x00002cdf,	"11487", "%0ld",
-__LINE__, -0x000000c,	"-12", "%d",
-__LINE__, -0x000000e,	"-14", "%-#2d",
-__LINE__, 0x00000371,	"881", "%#ld",
-__LINE__, 0x000015be,	" 5566", "%5.ld",
-__LINE__, 0x01525b91,	"22174609", "%#0.0ld",
-__LINE__, 0xff8fc22f,	"FF8FC22F", "% X",
-__LINE__, -0x0007f7b,	"-32635", "%4.ld",
-__LINE__, 0x00007bca,	"7bca", "%x",
-__LINE__, -0x0000582,	"-1410", "%ld",
-__LINE__, 0x00000047,	" +71", "%+04.2d",
-__LINE__, 0xf8a8dce2,	"f8a8dce2", "%+.6x",
-__LINE__, -0x000de2e,	"-56878", "%.0d",
-__LINE__, 0x019c03c1,	"0X19C03C1", "%#X",
-__LINE__, -0x0f3a43e,	"-15967294", "%ld",
-__LINE__, 0x00009e87,	"40583", "%#5.1d",
-__LINE__, 0x000000b8,	"184", "%0ld",
-__LINE__, -0x000befe,	"-48894", "%2ld",
-__LINE__, -0x002ee1a,	"-192026", "%.2d",
-__LINE__, 0x00004fd8,	"4fd8", "%x",
-__LINE__, 0x0006d57b,	"447867", "%2d",
-__LINE__, 0xfffffa9c,	"FFFFFA9C", "%-X",
-__LINE__, 0x0000000f,	"15", "%ld",
-__LINE__, 0x0005deb2,	"5DEB2", "% X",
-__LINE__, 0x00000007,	"7", "%X",
-__LINE__, 0xffffffc8,	"0XFFFFFFC8", "% #.1X",
-__LINE__, 0xfffff62f,	"FFFFF62F", "%X",
-__LINE__, -0x1a935bba,	"-445864890", "% 3.5d",
-__LINE__, 0x000b34b4,	"0x0b34b4", "%-#3.6x",
-__LINE__, 0xfffff430,	"FFFFF430", "%X",
-__LINE__, 0x00000b5f,	"+0002911", "%+#.7d",
-__LINE__, 0x00000007,	"  7", "%3ld",
-__LINE__, 0xffffffd8,	"FFFFFFD8", "% .7X",
-__LINE__, 0xfffff544,	"FFFFF544", "%0X",
-__LINE__, -0x353667b9,	"-892757945", "%d",
-__LINE__, 0x00000058,	"0x00058", "%+#.5x",
-__LINE__, 0x39dbcc4a,	"+970705994", "%+0.6ld",
-__LINE__, 0xfffffffd,	"fffffffd", "% 01x",
-__LINE__, 0x00b1c28e,	"+11649678", "%+0ld",
-__LINE__, 0x000066c2,	"0X66C2", "%-#4X",
-__LINE__, 0x007171a2,	"+7434658", "%+07.ld",
-__LINE__, -0x0000001,	"-1", "%-d",
-__LINE__, 0x00000ae0,	"+2784", "%+0d",
-__LINE__, 0x13786a57,	"326658647", "%#5d",
-__LINE__, -0x0000001,	"-1", "%2.ld",
-__LINE__, -0x0168a16,	"-1477142", "%d",
-__LINE__, 0x12df7dd6,	"316636630", "%ld",
-__LINE__, 0x00000000,	"000000", "%1.6d",
-__LINE__, 0x266da2a9,	"644719273", "%ld",
-__LINE__, 0x0000004a,	"74", "%d",
-__LINE__, 0x000102ff,	"00102FF", "%+06.7X",
-__LINE__, 0x17916237,	"0x17916237", "%#5x",
-__LINE__, -0x0003cbb,	"-0015547", "%-.7d",
-__LINE__, 0xe7da2010,	"e7da2010", "%2.4x",
-__LINE__, 0xfffffff3,	"fffffff3", "% .7x",
-__LINE__, 0xfc9b64f8,	"FC9B64F8", "% 7.X",
-__LINE__, 0x000001af,	"431", "%0d",
-__LINE__, 0xffc81796,	"0xffc81796", "%#.5x",
-__LINE__, 0x057a1fbc,	"+91889596", "%+04d",
-__LINE__, 0x00001ae1,	"6881", "%ld",
-__LINE__, 0xfffffff6,	"fffffff6", "%3.0x",
-__LINE__, -0x6b7d5db,	"-112711131", "%-06.1d",
-__LINE__, 0x008e8a5c,	" 8e8a5c", "%7.0x",
-__LINE__, 0xfe07a9bd,	"fe07a9bd", "%.1x",
-__LINE__, -0x00278e6,	"-162022", "%0ld",
-__LINE__, 0xf98709f5,	"F98709F5", "%X",
-__LINE__, -0x00000c9,	"-201", "% 1.d",
-__LINE__, -0x000001d,	"-00029", "%+2.5ld",
-__LINE__, 0x00000030,	" 48", "% d",
-__LINE__, 0xffd753f4,	"FFD753F4", "%0X",
-__LINE__, 0xfffffffd,	"FFFFFFFD", "%X",
-__LINE__, 0x0000a765,	"a765", "%x",
-__LINE__, 0x0026e2c8,	"26E2C8", "%-0X",
-__LINE__, -0x00003eb,	"-1003", "%3.1ld",
-__LINE__, 0x015d53ca,	"22893514", "%0ld",
-__LINE__, -0x0000020,	"-32", "%ld",
-__LINE__, -0x03558dd,	"-3496157", "%1.0ld",
-__LINE__, -0x000007f,	"-127", "%1.d",
-__LINE__, 0xffffc737,	"0xffffc737", "%+#x",
-__LINE__, 0x0000a70d,	"  a70d", "%6.x",
-__LINE__, 0x01ea0e31,	"0X1EA0E31", "% #1.X",
-__LINE__, 0x00b5f406,	"0X0B5F406", "%-#.7X",
-__LINE__, 0x0e58fa9a,	"240712346", "%.2d",
-__LINE__, 0xf43ff8a9,	"f43ff8a9", "%+0.6x",
-__LINE__, -0x5d0d3d3,	"-97571795", "%.3ld",
-__LINE__, -0x000027a,	"-634", "%0d",
-__LINE__, 0xffcef248,	"FFCEF248", "%07.X",
-__LINE__, 0x000002dc,	"2dc", "%0x",
-__LINE__, -0x31fa6c1,	"-52405953", "%.2d",
-__LINE__, 0x00000014,	"14", "%X",
-__LINE__, -0x0282f98,	"-2633624", "%ld",
-__LINE__, 0x00005f55,	"24405", "%#d",
-__LINE__, -0x0000004,	"-4", "%d",
-__LINE__, 0x00000001,	"1", "%+x",
-__LINE__, 0x013f47ce,	"13f47ce", "%0.x",
-__LINE__, 0x00143fce,	"1327054", "%.3d",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x00001f9a,	"1F9A", "% X",
-__LINE__, 0x00000cf5,	"cf5", "%x",
-__LINE__, 0xffea9c24,	"ffea9c24", "%x",
-__LINE__, 0xf09f85a7,	"F09F85A7", "%X",
-__LINE__, 0x00001e04,	"7684", "%ld",
-__LINE__, 0xffffc82a,	"ffffc82a", "%7x",
-__LINE__, -0x0000a77,	"-2679", "% d",
-__LINE__, 0x0019a859,	"+1681497", "%+2.6ld",
-__LINE__, -0x00002d7,	"-727", "%ld",
-__LINE__, 0x00011b82,	"72578", "%-#ld",
-__LINE__, 0x00000c32,	"3122", "%ld",
-__LINE__, -0x0000337,	"-823", "%1.d",
-__LINE__, 0x00000004,	"4", "%1ld",
-__LINE__, 0x0000062c,	"1580", "%.1ld",
-__LINE__, 0xffffffd3,	"FFFFFFD3", "% X",
-__LINE__, -0x07b1bf8,	"-8068088", "%#d",
-__LINE__, 0xfffffff9,	"fffffff9", "%x",
-__LINE__, 0x159e6cfb,	"159e6cfb", "%0.x",
-__LINE__, 0x0001148d,	"1148d", "%-.1x",
-__LINE__, 0x003373b7,	"3371959", "%#.0d",
-__LINE__, 0x00001af2,	"1af2", "%.4x",
-__LINE__, -0x0000001,	"-000001", "%+.6ld",
-__LINE__, -0x00001a3,	"-419", "%d",
-__LINE__, 0xfdb232e7,	"fdb232e7", "%5.4x",
-__LINE__, -0x000000d,	"-13", "%d",
-__LINE__, 0x98ec1c74,	"98ec1c74", "% 3x",
-__LINE__, 0xfffffff8,	"fffffff8", "%+1.4x",
-__LINE__, -0x0000d58,	"-3416", "%+#0ld",
-__LINE__, -0x65d1973,	"-106764659", "%.6d",
-__LINE__, -0x0737641,	"-7566913", "%-d",
-__LINE__, 0x0000037c,	"37c", "%+0x",
-__LINE__, 0x0000012c,	"0000300", "%#3.7d",
-__LINE__, 0x00c12d9b,	"12660123", "%1.5ld",
-__LINE__, 0xe7e5e77d,	"e7e5e77d", "%6x",
-__LINE__, 0x1fe0e820,	"1FE0E820", "%-4X",
-__LINE__, 0xc85a793a,	"C85A793A", "%X",
-__LINE__, 0x05f9fe2c,	"100269612", "%#ld",
-__LINE__, 0x00000032,	"0X32", "%+#4.1X",
-__LINE__, 0xfab4ce81,	"fab4ce81", "%3.x",
-__LINE__, -0x0000009,	"-9", "%2.d",
-__LINE__, 0xffff8d2e,	"ffff8d2e", "% 6x",
-__LINE__, 0xfffffffe,	"0xfffffffe", "%#x",
-__LINE__, 0x02960f60,	"2960f60", "%1.x",
-__LINE__, 0x34cf3cbc,	" 885996732", "% 5ld",
-__LINE__, -0x000006e,	"-110", "% d",
-__LINE__, -0x0000001,	"-1", "%-.0d",
-__LINE__, 0x000000b1,	"     B1", "%+7X",
-__LINE__, 0xfffff5b4,	"FFFFF5B4", "%01.7X",
-__LINE__, 0x00000086,	"86", "%0X",
-__LINE__, 0x00074367,	" 74367", "% 6x",
-__LINE__, 0x001000d7,	"+1048791", "%+ld",
-__LINE__, 0x00000f35,	" 3893", "% d",
-__LINE__, -0x00000e1,	"-225", "%d",
-__LINE__, 0xffff6694,	"FFFF6694", "%6.X",
-__LINE__, 0x00019cf7,	"19cf7", "%0.x",
-__LINE__, 0x00000046,	"0046", "%+.4X",
-__LINE__, -0x000001f,	"-31", "%ld",
-__LINE__, 0xfff25859,	"fff25859", "%6x",
-__LINE__, 0x21884061,	"562577505", "%#ld",
-__LINE__, 0x01448b7a,	"1448B7A", "%0.1X",
-__LINE__, 0xffffffc0,	"ffffffc0", "%x",
-__LINE__, 0xfffffed5,	"fffffed5", "% 1.0x",
-__LINE__, 0x0e349767,	"E349767", "%.5X",
-__LINE__, 0x00000330,	"816", "%0d",
-__LINE__, -0x0000016,	"-22", "%d",
-__LINE__, 0xffff9bab,	"FFFF9BAB", "%X",
-__LINE__, 0xffffee4e,	"ffffee4e", "%x",
-__LINE__, 0x0026beeb,	"2539243", "%6.d",
-__LINE__, 0x00002c6c,	"11372", "%.2d",
-__LINE__, -0x000002c,	"-44", "%ld",
-__LINE__, -0x001dcfa,	"-122106", "% d",
-__LINE__, 0x0001683c,	"92220", "%#4.ld",
-__LINE__, 0x09b51fc9,	"9b51fc9", "%+.7x",
-__LINE__, 0x0000001d,	"29", "%0ld",
-__LINE__, -0x83f17e5,	"-138352613", "%ld",
-__LINE__, 0xfa4e2c1b,	"fa4e2c1b", "%x",
-__LINE__, 0x000001f3,	"499", "%0ld",
-__LINE__, 0xffff03e4,	"ffff03e4", "%x",
-__LINE__, 0x000000ac,	"+0172", "%+.4ld",
-__LINE__, 0x03c3903b,	"63148091", "%00d",
-__LINE__, 0x0000000d,	"13", "%#d",
-__LINE__, 0x0000002e,	"0X2E", "%#X",
-__LINE__, 0x00006b2d,	"6B2D", "%X",
-__LINE__, 0x0000010b,	"  0010b", "%7.5x",
-__LINE__, 0x0000017a,	" 17a", "%4x",
-__LINE__, 0xfffffffb,	"fffffffb", "%+x",
-__LINE__, 0xffffac6a,	"ffffac6a", "%-.3x",
-__LINE__, -0x0005870,	"-22640", "%0d",
-__LINE__, 0x189c17bc,	"189c17bc", "%x",
-__LINE__, -0x01bbc38,	"-1817656", "%#6.ld",
-__LINE__, -0x3382b55,	"-54012757", "%d",
-__LINE__, -0x0000007,	"-7", "%-ld",
-__LINE__, -0x000c74b,	"-51019", "%ld",
-__LINE__, 0x0001a6f2,	"+108274", "%+#1.ld",
-__LINE__, 0x00077448,	"77448", "%x",
-__LINE__, 0x00000000,	"0", "%x",
-__LINE__, 0xfffff056,	"FFFFF056", "%.3X",
-__LINE__, -0x6f3f9451,	"-1866437713", "%-#3.0ld",
-__LINE__, 0x000000ac,	"AC", "%X",
-__LINE__, 0xffc8752f,	"ffc8752f", "%-x",
-__LINE__, 0xfffffe6d,	"FFFFFE6D", "%2.X",
-__LINE__, -0x377f1a5,	"-58192293", "% .2d",
-__LINE__, -0x0000294,	"-660", "%d",
-__LINE__, 0xfffffffe,	"fffffffe", "%-x",
-__LINE__, 0xfffcbbe8,	"0xfffcbbe8", "%-#4.x",
-__LINE__, 0x0022e510,	"+2286864", "%+ld",
-__LINE__, 0xfffffe2a,	"FFFFFE2A", "%0.3X",
-__LINE__, 0xfe29f7c0,	"fe29f7c0", "%x",
-__LINE__, 0xfffe957e,	"FFFE957E", "%X",
-__LINE__, 0x000080f8,	"33016", "%ld",
-__LINE__, 0x0003ee2c,	" 257580", "%7d",
-__LINE__, 0x000003a1,	"929", "%d",
-__LINE__, 0x0000021f,	"21f", "%+x",
-__LINE__, 0xffffffff,	"ffffffff", "%.5x",
-__LINE__, -0x040a988,	"-4237704", "%-d",
-__LINE__, 0x027c8b69,	"41716585", "%ld",
-__LINE__, 0x00000003,	"3", "%-X",
-__LINE__, -0x0000368,	"   -872", "%7.d",
-__LINE__, 0x00000d3c,	"3388", "%0.2d",
-__LINE__, -0x33734cc,	"-53949644", "%2ld",
-__LINE__, 0x000003db,	"3DB", "%X",
-__LINE__, -0x00f154d,	"-988493", "%5d",
-__LINE__, 0x0000000b,	"  11", "%4.ld",
-__LINE__, 0x00000067,	"103", "%-ld",
-__LINE__, -0x0199fce,	"-1679310", "%4d",
-__LINE__, 0x02b6266b,	"2b6266b", "% x",
-__LINE__, -0x006b39d,	"-439197", "%+d",
-__LINE__, 0x00000007,	"7", "%ld",
-__LINE__, 0x0141fc98,	"21101720", "%0ld",
-__LINE__, -0x0008420,	"-33824", "%d",
-__LINE__, 0x0011622b,	"1139243", "%6ld",
-__LINE__, 0x0000001b,	"27", "%-d",
-__LINE__, -0x0030935,	"-198965", "%3d",
-__LINE__, 0x0000001f,	"  1f", "%4.x",
-__LINE__, -0x10782a19,	"-276310553", "%#ld",
-__LINE__, -0x007eac4,	"-518852", "%06.ld",
-__LINE__, 0x0bc4c681,	"197445249", "%6ld",
-__LINE__, 0x000000f5,	"245", "%.3ld",
-__LINE__, 0x00000197,	"197", "%X",
-__LINE__, 0xfffffeab,	"FFFFFEAB", "% X",
-__LINE__, 0x00000f05,	"F05", "%+X",
-__LINE__, 0xffe1b785,	"0xffe1b785", "%#x",
-__LINE__, -0x02d3581,	"-2962817", "%05d",
-__LINE__, 0xffffb994,	"FFFFB994", "%X",
-__LINE__, 0x03d139a3,	"64043427", "%ld",
-__LINE__, -0x0000002,	"  -2", "%+4.d",
-__LINE__, -0x043da83,	"-4446851", "%#ld",
-__LINE__, -0x6aad891,	"-111859857", "%7.ld",
-__LINE__, 0x00003e68,	"15976", "%-4.5ld",
-__LINE__, 0xffe4d3ee,	"FFE4D3EE", "%X",
-__LINE__, 0x00000002,	"000002", "%4.6ld",
-__LINE__, 0xffffee32,	"ffffee32", "%4x",
-__LINE__, 0x0cb7dd25,	"cb7dd25", "%3x",
-__LINE__, 0xf773d422,	"F773D422", "%X",
-__LINE__, -0x0b590f7,	"-11899127", "%#d",
-__LINE__, -0x0002c45,	"-11333", "%-#5ld",
-__LINE__, -0x1efc9e4,	"-32492004", "%ld",
-__LINE__, -0x0003b9c,	"-15260", "%d",
-__LINE__, 0x000001b6,	"0X1B6", "%#4X",
-__LINE__, 0x3ce93ec3,	"1021918915", "%.6d",
-__LINE__, 0xffffffff,	"ffffffff", "%-x",
-__LINE__, 0xfffaf0e4,	"fffaf0e4", "%2.x",
-__LINE__, 0x00000002,	"0x2", "%#x",
-__LINE__, 0x0000e806,	"e806", "%4x",
-__LINE__, 0xfffffff0,	"fffffff0", "% 2.x",
-__LINE__, 0xfffffc0e,	"fffffc0e", "%+.4x",
-__LINE__, 0xfd45716e,	"FD45716E", "%.4X",
-__LINE__, 0xfff96fda,	"FFF96FDA", "%-X",
-__LINE__, 0xff99d08a,	"FF99D08A", "%.5X",
-__LINE__, 0x00000002,	"2", "%-00.d",
-__LINE__, -0x000000f,	"   -15", "%6.ld",
-__LINE__, -0x00d321c,	"-864796", "%#1ld",
-__LINE__, 0xff19ff8d,	"ff19ff8d", "%1.5x",
-__LINE__, 0x00000000,	"0000000", "%-.7x",
-__LINE__, 0x0000f50d,	" F50D", "%5X",
-__LINE__, 0x00001688,	"   5768", "%7.ld",
-__LINE__, 0x00000157,	"343", "%2ld",
-__LINE__, 0xfffffffd,	"0xfffffffd", "%+#3x",
-__LINE__, 0x00000d52,	"3410", "%ld",
-__LINE__, 0x00000003,	"3", "%d",
-__LINE__, 0x0001c6d2,	"01c6d2", "%.6x",
-__LINE__, 0x242d65d2,	"606954962", "%#7.ld",
-__LINE__, 0x00000e9f,	"0000E9F", "%5.7X",
-__LINE__, 0x0002d785,	"2D785", "%0X",
-__LINE__, 0x00000167,	"167", "%0X",
-__LINE__, 0xfffff5e5,	"fffff5e5", "% x",
-__LINE__, 0xffb69a04,	"0xffb69a04", "%#0.x",
-__LINE__, 0xfffa012e,	"FFFA012E", "%X",
-__LINE__, 0x0000001a,	"0x1a", "% #x",
-__LINE__, 0xfffb26d3,	"fffb26d3", "%+x",
-__LINE__, -0x00003e6,	"   -998", "%7ld",
-__LINE__, 0x00000004,	"4", "%-d",
-__LINE__, 0xfffffd76,	"0XFFFFFD76", "%#7X",
-__LINE__, 0x00000035,	"53", "%ld",
-__LINE__, 0xffc6c190,	"0XFFC6C190", "%#X",
-__LINE__, 0xffffffe2,	"ffffffe2", "%7.0x",
-__LINE__, 0x03ff1b87,	"67050375", "%2.d",
-__LINE__, 0x00020c47,	"0X20C47", "%#X",
-__LINE__, 0x00000000,	"0", "%d",
-__LINE__, 0x0000000e,	"0X000E", "% #.4X",
-__LINE__, -0x00035cd,	"-13773", "%+2.d",
-__LINE__, 0x00005eec,	"5eec", "%1x",
-__LINE__, 0x001da0ff,	"1941759", "%0d",
-__LINE__, 0xf8a9e96a,	"f8a9e96a", "%+x",
-__LINE__, -0x0000120,	"-288  ", "%-#6.d",
-__LINE__, 0x00000000,	"0", "%-X",
-__LINE__, 0x0000152e,	"152E", "%+X",
-__LINE__, -0x0001077,	"-4215", "% 0d",
-__LINE__, 0xffffffd7,	"FFFFFFD7", "%0X",
-__LINE__, 0xfffe097d,	"FFFE097D", "%2X",
-__LINE__, 0xcb982712,	"cb982712", "%x",
-__LINE__, 0xfff39f2e,	"FFF39F2E", "%.5X",
-__LINE__, -0x0058cae,	"-363694", "%+.1d",
-__LINE__, -0x000002b,	"-043", "%#1.3d",
-__LINE__, -0x001e989,	"-125321", "%1d",
-__LINE__, 0x00959ecd,	"9805517", "%d",
-__LINE__, 0xf49df846,	"F49DF846", "%+3X",
-__LINE__, 0xfffffffd,	"fffffffd", "%+.5x",
-__LINE__, -0x000ac76,	"-44150", "%3.ld",
-__LINE__, 0x00000028,	"  0028", "%06.4x",
-__LINE__, 0x000003e8,	"3E8", "%-02X",
-__LINE__, 0x00000012,	"012", "%.3X",
-__LINE__, 0x00000006,	"0X6", "%#X",
-__LINE__, 0x00ef8479,	"+15697017", "%+0.6d",
-__LINE__, 0xffffffe8,	"FFFFFFE8", "%-X",
-__LINE__, 0x773a90f7,	"773a90f7", "%3.5x",
-__LINE__, 0x00096d44,	"96D44", "%-X",
-__LINE__, -0x08a3d96,	"-9059734", "%ld",
-__LINE__, -0x000001a,	"-26", "%00.ld",
-__LINE__, 0x32f57585,	"32f57585", "% x",
-__LINE__, 0x2825f175,	"2825F175", "%X",
-__LINE__, 0x000054ff,	"21759", "%-2d",
-__LINE__, -0x0266cdc,	"-2518236", "%ld",
-__LINE__, 0x0000031d,	"0X31D", "%+#4X",
-__LINE__, 0x0003fc99,	"3fc99", "%x",
-__LINE__, -0x0064624,	"-411172", "%-#d",
-__LINE__, 0x0001b2d9,	"111321", "%-ld",
-__LINE__, -0x000007c,	"-124", "%#d",
-__LINE__, 0xfffffffa,	"FFFFFFFA", "%+X",
-__LINE__, -0x007a5b8,	"-501176", "%+ld",
-__LINE__, 0x0213b583,	"213B583", "%2.X",
-__LINE__, 0xfff12e51,	"FFF12E51", "%+X",
-__LINE__, 0x00052403,	"0336899", "%-0.7d",
-__LINE__, 0xffffffff,	"ffffffff", "%-04.4x",
-__LINE__, 0x00000010,	"0010", "%0.4X",
-__LINE__, 0xffffffb5,	"FFFFFFB5", "%-1.3X",
-__LINE__, -0x0000001,	"-1", "%d",
-__LINE__, 0x0003a2d1,	"3a2d1", "% x",
-__LINE__, 0x00000424,	"1060", "%0ld",
-__LINE__, -0x0000078,	"-120", "%1d",
-__LINE__, 0x00000000,	"0", "%ld",
-__LINE__, 0x00000414,	"1044", "%ld",
-__LINE__, 0x00000072,	"0x072", "%#5.3x",
-__LINE__, 0x0000007a,	"7A", "% X",
-__LINE__, 0x081542a3,	"135611043", "%0d",
-__LINE__, 0xfffb4ce6,	"fffb4ce6", "%4.6x",
-__LINE__, 0x00002ab2,	"2ab2", "%-1x",
-__LINE__, 0x00000000,	" 0", "% 2x",
-__LINE__, 0xfffffa59,	"FFFFFA59", "%2.X",
-__LINE__, 0xffffe22b,	"ffffe22b", "%-x",
-__LINE__, 0xfffffd52,	"FFFFFD52", "%+.2X",
-__LINE__, 0x0000039f,	"927", "%-d",
-__LINE__, 0x0002dea6,	"2dea6", "%0x",
-__LINE__, 0x000216db,	"136923", "%ld",
-__LINE__, 0x00000013,	"19", "%0d",
-__LINE__, 0x000047cc,	"18380", "%2.2ld",
-__LINE__, -0x0007d10,	"-32016", "%d",
-__LINE__, 0xff9af906,	"FF9AF906", "%0X",
-__LINE__, 0x02cfa224,	"+47161892", "%+0.7d",
-__LINE__, -0x0000022,	"-34", "%1.d",
-__LINE__, 0xfffffff0,	"FFFFFFF0", "%-4X",
-__LINE__, 0x00000029,	"    41", "%6.ld",
-__LINE__, 0xffffff76,	"ffffff76", "%x",
-__LINE__, 0x00000000,	"0", "%+X",
-__LINE__, 0x00000001,	"1", "%d",
-__LINE__, 0xfff6de5a,	"FFF6DE5A", "%X",
-__LINE__, 0x00000002,	"2", "%ld",
-__LINE__, 0x00000025,	"25", "%+x",
-__LINE__, 0xfffffffb,	"FFFFFFFB", "%5.0X",
-__LINE__, 0x0011bbb5,	"1162165", "%0.0ld",
-__LINE__, 0xfffcdc96,	"0XFFFCDC96", "%#X",
-__LINE__, 0x00008f5f,	"8f5f", "%3.1x",
-__LINE__, 0xffa0fa5d,	"0XFFA0FA5D", "%#X",
-__LINE__, 0x00004534,	"4534", "% 0X",
-__LINE__, 0xfffffff9,	"fffffff9", "%.2x",
-__LINE__, 0xffeeae50,	"ffeeae50", "%-x",
-__LINE__, 0x00002964,	" 0010596", "% 0.7d",
-__LINE__, 0x000021c9,	"  21c9", "%6x",
-__LINE__, 0x00000001,	" 1", "% d",
-__LINE__, 0x0002abd8,	"+175064", "%+d",
-__LINE__, 0xffffffad,	"FFFFFFAD", "%+0X",
-__LINE__, 0x00000003,	"3", "%ld",
-__LINE__, 0x0c036da3,	" 201551267", "% .3d",
-__LINE__, -0x004343c,	"-275516", "%+ld",
-__LINE__, 0x00000003,	"003", "% .3x",
-__LINE__, 0xffffe34e,	"ffffe34e", "%x",
-__LINE__, 0x0000e118,	"e118", "%x",
-__LINE__, -0x007d945,	"-514373", "%+#0ld",
-__LINE__, 0x277f1cc5,	"277f1cc5", "% x",
-__LINE__, 0x00003bef,	"03bef", "% 0.5x",
-__LINE__, 0xfffffcb9,	"fffffcb9", "%x",
-__LINE__, 0x0003311a,	"209178", "%ld",
-__LINE__, 0x00000000,	"   ", "%3.ld",
-__LINE__, 0x05942225,	"5942225", "%x",
-__LINE__, 0xfffceb4c,	"FFFCEB4C", "%-X",
-__LINE__, 0xffd08633,	"ffd08633", "%2.x",
-__LINE__, -0x0000001,	"    -1", "%6d",
-__LINE__, 0x000fdb12,	"1039122", "%d",
-__LINE__, 0x00000003,	"3", "% 0X",
-__LINE__, -0x2fd5bf1,	"-50158577", "% 5.ld",
-__LINE__, -0x0089a03,	"-563715", "%-d",
-__LINE__, 0xfffffffe,	"FFFFFFFE", "% X",
-__LINE__, 0x29fdb2ba,	"29fdb2ba", "% 0x",
-__LINE__, 0x0000008f,	"8F", "% X",
-__LINE__, 0x00000003,	"3", "%ld",
-__LINE__, 0xffc58445,	"FFC58445", "%.2X",
-__LINE__, -0x00023f6,	"-9206", "%+d",
-__LINE__, 0x00000011,	"11", "%X",
-__LINE__, -0x0000003,	"-0000003", "%-.7d",
-__LINE__, -0x0000003,	"-3", "%#ld",
-__LINE__, 0x001242d9,	"1242D9", "%X",
-__LINE__, -0x48d0c81,	"-76352641", "%7.d",
-__LINE__, -0x001b675,	"-112245", "%#ld",
-__LINE__, 0x00000003,	"3", "%-d",
-__LINE__, 0xfff93fdf,	"0XFFF93FDF", "% #X",
-__LINE__, 0x001a9414,	"1741844", "%#ld",
-__LINE__, 0x0001fd86,	"130438", "%ld",
-__LINE__, 0x010f37a8,	"17774504", "%4.7d",
-__LINE__, 0x00382838,	"0382838", "%3.7X",
-__LINE__, -0x47fd56c2,	"-1207785154", "%ld",
-__LINE__, 0x001981dd,	"1981dd", "%x",
-__LINE__, 0xffffefba,	"ffffefba", "% 06.x",
-__LINE__, -0x3f402b29,	"-1061169961", "%+#ld",
-__LINE__, -0x395aae44,	"-962244164", "%-1d",
-__LINE__, 0x1fa39f42,	"530816834", "%#d",
-__LINE__, -0x000358d,	"-13709", "%d",
-__LINE__, -0xdc17b8f,	"-230783887", "%ld",
-__LINE__, -0x23c41583,	"-600053123", "%+3.d",
-__LINE__, 0xfffffc16,	"fffffc16", "%x",
-__LINE__, 0x003f1364,	"4133732", "%7.ld",
-__LINE__, 0xffffe691,	"FFFFE691", "%07X",
-__LINE__, 0x07b31d71,	"129178993", "%.7d",
-__LINE__, -0x0019732,	"-104242", "% ld",
-__LINE__, 0x02428167,	"0x2428167", "%#x",
-__LINE__, -0x06c1ecd,	"-7085773", "%.7ld",
-__LINE__, 0xfb01cb4e,	"fb01cb4e", "%x",
-__LINE__, 0x00005a41,	"+23105", "%+ld",
-__LINE__, 0xfffffff4,	"FFFFFFF4", "%-5.X",
-__LINE__, 0x00000005,	"   5", "%4.ld",
-__LINE__, 0xf4ab4b2d,	"F4AB4B2D", "%0.X",
-__LINE__, -0x000fce3,	"-64739", "%+#3.ld",
-__LINE__, 0x000076ea,	" 30442", "%6.2ld",
-__LINE__, 0x00000cb9,	" cb9", "%4.x",
-__LINE__, 0x002f43ef,	"3097583", "%1.1ld",
-__LINE__, 0xf5bd0105,	"F5BD0105", "%+X",
-__LINE__, 0x0037954a,	"3642698", "%d",
-__LINE__, 0xfffffff7,	"0XFFFFFFF7", "%-#X",
-__LINE__, 0xffffcedf,	"0xffffcedf", "%#6.7x",
-__LINE__, 0xfffffde4,	"FFFFFDE4", "%2.4X",
-__LINE__, 0x01a6f103,	"1a6f103", "%5.x",
-__LINE__, 0x00000191,	"    191", "%7.0X",
-__LINE__, 0x00000003,	"03", "% .2X",
-__LINE__, -0xd4e3219,	"-223228441", "%6.ld",
-__LINE__, 0x00b0efbd,	"11595709", "%d",
-__LINE__, -0x00000ea,	"-234", "%#3d",
-__LINE__, 0x00000be8,	"BE8  ", "%-5X",
-__LINE__, 0xffffffff,	"ffffffff", "%5.3x",
-__LINE__, -0x267f8c6,	"-40368326", "%d",
-__LINE__, 0x000006ed,	"6ED", "%X",
-__LINE__, 0xfdd6c9b6,	"FDD6C9B6", "%X",
-__LINE__, 0x0007ac29,	"7ac29", "%-x",
-__LINE__, 0x00000014,	"14", "%2x",
-__LINE__, 0x123ca563,	"+305964387", "%+ld",
-__LINE__, 0x00000004,	"    4", "%5.d",
-__LINE__, 0xffff877a,	"ffff877a", "%x",
-__LINE__, -0x00003e7,	"-999", "%+0.3d",
-__LINE__, 0x0a68ba6e,	"a68ba6e", "%3.1x",
-__LINE__, 0xfe29c810,	"FE29C810", "%+X",
-#endif
-
-__LINE__, 0x00000000,	"0", "%o",
-__LINE__, 0000000123,	"123", "%o",
-__LINE__, 0000123456,	"0123456", "%#o",
-__LINE__, 0000123456,	"00123456", "%#.8o",
-__LINE__, 0000123456,	"  00123456", "%#10.8o",
-__LINE__, 0x00000123,	"0x00123", "%#07x",
-
-0,
-};
diff --git a/newlib/libm/test/sprint_vec.c b/newlib/libm/test/sprint_vec.c
deleted file mode 100644
index 5ac72518e..000000000
--- a/newlib/libm/test/sprint_vec.c
+++ /dev/null
@@ -1,3985 +0,0 @@
-#include "test.h"
-
-sprint_double_type sprint_doubles[] = 
-{
-__LINE__, -1.002121970718271e+29,	"-1.0E+29", "%.1E",
-__LINE__, -1.002126048612756e-02,	"-1.002126E-02", "%+#E",
-__LINE__, -1.002653755271637e+00,	"-1.00265", "%G",
-__LINE__, -1.003238744365917e-23,	"-0.00", "%4.2f",
-__LINE__, -1.005084840877781e-29,	"  -0", "%4.f",
-__LINE__, -1.005362549674427e+01,	"-10.0536", "%#g",
-__LINE__, -1.005915042991691e-17,	"-1.00592E-17", "%G",
-__LINE__, -1.007829874228503e-18,	"-1.00783e-18", "%.7g",
-__LINE__, -1.007829874228503e-18,	"-1.007830e-18", "%#.7g",
-__LINE__, -1.009390937771849e+15,	"-1009390937771848.628657", "%+f",
-__LINE__, -1.010679382726182e-29,	"-0.0000000", "%.7f",
-__LINE__, -1.010691853346650e+13,	"-10106918533466.497934", "%+f",
-__LINE__, -1.013412912122286e-22,	"-1.01E-22", "%.2E",
-__LINE__, -1.019269582113858e-25,	"  -0", "%4.0f",
-__LINE__, -1.019886033368556e+24,	"-1.019886E+24", "%+.7G",
-__LINE__, -1.021037413548719e+02,	"-102.103741", "%f",
-__LINE__, -1.023833576089065e+26,	"-1.023834E+26", "%+E",
-__LINE__, -1.024736652408627e+10,	"-10247366524.086265", "%+f",
-__LINE__, -1.025439198495476e+09,	"-1.02544e+09", "%+g",
-__LINE__, -1.027080247585776e-04,	"-0.0001027", "%6.7f",
-__LINE__, -1.028096307262016e+18,	"-1.0281E+18", "%3G",
-__LINE__, -1.029604290697901e-02,	"-0.010296", "%g",
-__LINE__, -1.034347730570491e+16,	"-10343477305704908.975059", "%+f",
-__LINE__, -1.034663325049286e+22,	"-1.0E+22", "%#.1E",
-__LINE__, -1.034843152721857e-14,	"    -0", "%6.f",
-__LINE__, -1.036082122299529e-29,	"-1.04e-29", "%4.3g",
-__LINE__, -1.037213662365954e-09,	"-1e-09", "%3.e",
-__LINE__, -1.038563976775690e-12,	"-0.000000", "%f",
-__LINE__, -1.040910158681323e-02,	"-0.0104091", "%+G",
-__LINE__, -1.044680094714482e-20,	"-1.04468E-20", "%G",
-__LINE__, -1.044990054091126e+24,	"-1.044990E+24", "%+E",
-__LINE__, -1.045693871096982e+11,	"-1.045694e+11", "%+e",
-__LINE__, -1.045714133591312e-04,	"-0.000104571", "%+#3g",
-__LINE__, -1.046215079103016e-15,	"-1.04622e-15", "%g",
-__LINE__, -1.046285293993789e-18,	"-1.04629E-18", "%+4G",
-__LINE__, -1.046306092899333e-06,	"-0.00", "%0.2f",
-__LINE__, -1.047308973649206e-22,	"-1.05E-22", "%+1.3G",
-__LINE__, -1.047369032507755e+01,	"-1.047369E+01", "%E",
-__LINE__, -1.048986365562919e-21,	"-1.05E-21", "%+.2E",
-__LINE__, -1.049530193156793e-17,	"-1.04953E-17", "%+G",
-__LINE__, -1.050073419263768e+25,	"-1.05007e+25", "%g",
-__LINE__, -1.051739652002504e-28,	"-0.000000", "%+f",
-__LINE__, -1.054493420082636e+21,	"-1.0545e+21", "%#5.4e",
-__LINE__, -1.055867291029098e+18,	"-1.05587e+18", "%g",
-__LINE__, -1.056514389757866e-16,	"-1.05651E-16", "%5.6G",
-__LINE__, -1.057180924868704e+15,	"-1057180924868704", "%4.f",
-__LINE__, -1.058455468395683e-23,	"-1.05846e-23", "%g",
-__LINE__, -1.062560982393212e+08,	"-1.06256e+08", "%g",
-__LINE__, -1.063365829241138e-10,	"-1.063366e-10", "%+e",
-__LINE__, -1.063568908667280e-19,	"-1.06357E-19", "%+G",
-__LINE__, -1.063734263253492e-13,	"-0.000000", "%0f",
-__LINE__, -1.064472689765495e-13,	"-1E-13", "%4.0G",
-__LINE__, -1.067192610000129e-25,	"-1.06719E-25", "%G",
-__LINE__, -1.068401334996592e-12,	"-0.0000000", "%+.7f",
-__LINE__, -1.069012628653724e-13,	"-1.069013E-13", "%+.7G",
-__LINE__, -1.069451976810790e+16,	"-10694519768107904.056365", "%f",
-__LINE__, -1.069568935323556e+17,	"-1.06957e+17", "%g",
-__LINE__, -1.071351044854107e-29,	"-1.07135e-29", "%g",
-__LINE__, -1.072274197526185e-21,	"-1E-21", "%1.G",
-__LINE__, -1.073875921752995e+23,	"-1E+23", "%5.E",
-__LINE__, -1.074835151152265e-12,	"-1.0748e-12", "%1.5g",
-__LINE__, -1.075171047088241e-19,	"-1.07517E-19", "%#G",
-__LINE__, -1.076258826412760e+22,	"-1.076259e+22", "%+e",
-__LINE__, -1.076365103160401e+06,	"-1.07637E+06", "%+4.6G",
-__LINE__, -1.076817750454633e+08,	"-1e+08", "%4.g",
-__LINE__, -1.078615405755685e-30,	"-1e-30", "%4.g",
-__LINE__, -1.078629622917468e-25,	"-1.078630e-25", "%e",
-__LINE__, -1.079352432833170e+11,	"-107935243283", "%+2.f",
-__LINE__, -1.081431147440215e+16,	"-10814311474402147.439378", "%+f",
-__LINE__, -1.083042116905339e-16,	"-1.083e-16", "%.5g",
-__LINE__, -1.085351710708553e-10,	"-1.085e-10", "%1.4g",
-__LINE__, -1.085796045618276e+07,	"-1.085796e+07", "%e",
-__LINE__, -1.087398259981007e+22,	"-1.0874e+22", "%g",
-__LINE__, -1.087986044402224e-11,	"-1.087986e-11", "%e",
-__LINE__, -1.090451848762709e-02,	"-1.090452e-02", "%e",
-__LINE__, -1.091463236899737e+11,	"-1.091463E+11", "%#E",
-__LINE__, -1.091617921737384e-29,	"-1.09162e-29", "%3g",
-__LINE__, -1.092049328579047e-17,	"-1.092049E-17", "%E",
-__LINE__, -1.093647615472090e+06,	"-1093647.61547", "%6.5f",
-__LINE__, -1.094133175602384e-08,	"-1.1E-08", "%0.1E",
-__LINE__, -1.095397916728214e-23,	"-1e-23", "%6.e",
-__LINE__, -1.098958790437321e+02,	"-109.895879", "%+#f",
-__LINE__, -1.100194638181594e-20,	"-1.100195e-20", "%e",
-__LINE__, -1.102174253534260e+05,	"-1.1e+05", "%2.3g",
-__LINE__, -1.102890180316350e-12,	"-1.10289e-12", "%+g",
-__LINE__, -1.105582337418378e+00,	"-1.11", "%3.3g",
-__LINE__, -1.110515122647056e+04,	"-1.E+04", "%#0.G",
-__LINE__, -1.111365895262625e-18,	"-1e-18", "%0.g",
-__LINE__, -1.112010622677495e+04,	"-11120.1", "%g",
-__LINE__, -1.112580043156699e-23,	"-1.11258e-23", "%1g",
-__LINE__, -1.112829057091303e+08,	"-1.11283e+08", "%+2g",
-__LINE__, -1.115019046200472e+18,	"-1.1150190e+18", "%+#.7e",
-__LINE__, -1.118078332268016e-13,	"-1.12E-13", "%1.3G",
-__LINE__, -1.119113571963886e+08,	"-1.119114e+08", "%e",
-__LINE__, -1.120102397563448e-15,	"-1.12e-15", "%.4g",
-__LINE__, -1.120707480791434e-19,	"-1.12071e-19", "%g",
-__LINE__, -1.124243676139007e-07,	"-0.000000", "%f",
-__LINE__, -1.125025214608798e+15,	"-1.12503E+15", "%0G",
-__LINE__, -1.126074395136447e+06,	"-1E+06", "%+.0G",
-__LINE__, -1.127203019940870e-06,	"-0.000001", "%+#7f",
-__LINE__, -1.130577648480677e+01,	"-1.130578e+01", "%e",
-__LINE__, -1.131469694425240e-11,	"-1.13147e-11", "%#0.6g",
-__LINE__, -1.132225023239752e+02,	"-113.223", "%G",
-__LINE__, -1.133702113050128e+20,	"-1E+20", "%+3.E",
-__LINE__, -1.135529466224404e-13,	"-1.13553e-13", "%#g",
-__LINE__, -1.137587210063004e+21,	"-1e+21", "%.1g",
-__LINE__, -1.140765637106361e-21,	"-1.1e-21", "%+.1e",
-__LINE__, -1.141182595083699e-18,	"-0.000000", "%f",
-__LINE__, -1.141695709120972e+00,	"-1.1417", "%3G",
-__LINE__, -1.143199141708028e+18,	"-1143199141708027833", "%2.f",
-__LINE__, -1.146712902056139e+21,	"-1146712902056139071760.298975", "%f",
-__LINE__, -1.146837903839073e-02,	" -0.0", "%+5.1f",
-__LINE__, -1.147363016107446e+10,	"-1.14736e+10", "%+7g",
-__LINE__, -1.149575523465052e+20,	"-114957552346505220697.28140", "%+.5f",
-__LINE__, -1.152748955392589e+13,	"-1.15275E+13", "%G",
-__LINE__, -1.152751106015483e-17,	"-1E-17", "%+3.E",
-__LINE__, -1.155539139258226e-18,	"-1.2e-18", "%+.2g",
-__LINE__, -1.157089280563492e+20,	"-1.15709e+20", "%g",
-__LINE__, -1.161217745859779e+19,	"-1.161218E+19", "%E",
-__LINE__, -1.162293536734798e+10,	"-11622935367.347980", "%f",
-__LINE__, -1.162629909468603e+20,	"-1.16E+20", "%.3G",
-__LINE__, -1.164979155838631e+24,	"-1.16498E+24", "%G",
-__LINE__, -1.165103052644816e-20,	" -1e-20", "%+7.g",
-__LINE__, -1.166448459023264e-08,	"-0.000000", "%f",
-__LINE__, -1.167694506705309e+28,	"-1e+28", "%.1g",
-__LINE__, -1.169901754818745e-28,	"-0.000000", "%+f",
-__LINE__, -1.170330336216446e+08,	" -1e+08", "%7.g",
-__LINE__, -1.170946623214213e-17,	"-1.17095E-17", "%G",
-__LINE__, -1.174581596799302e+27,	"-1.174582e+27", "%+e",
-__LINE__, -1.174763473995155e-28,	"-1E-28", "%.1G",
-__LINE__, -1.175885640508038e-23,	"-1E-23", "%+.0E",
-__LINE__, -1.177268411775439e-05,	"-0.000012", "%#2.6f",
-__LINE__, -1.177739669428001e-30,	"-1.17774E-30", "%G",
-__LINE__, -1.178059639880544e-02,	"-0.0117806", "%+.7G",
-__LINE__, -1.178793300854446e-13,	"-1.2E-13", "%+#0.2G",
-__LINE__, -1.179629345138058e-04,	"-0.000118", "%0.3g",
-__LINE__, -1.180730292213358e-25,	"-1.18073e-25", "%g",
-__LINE__, -1.180766261654697e+02,	"-118.077", "%3g",
-__LINE__, -1.181880261069391e-29,	"-1.181880e-29", "%+#e",
-__LINE__, -1.183752810063514e-09,	"-1.18375e-09", "%#g",
-__LINE__, -1.184191742443406e-21,	"-1.184192e-21", "%e",
-__LINE__, -1.184859760488406e-26,	"-1.18486E-26", "%G",
-__LINE__, -1.187276828720072e-29,	"-1.18728E-29", "%G",
-__LINE__, -1.187992907205195e-04,	"-1.187993E-04", "%E",
-__LINE__, -1.190586192763405e-28,	"-1.E-28", "%#1.E",
-__LINE__, -1.192104053032086e+02,	"-119.21", "%G",
-__LINE__, -1.192917884333569e+26,	"-1.192918E+26", "%E",
-__LINE__, -1.195900753509801e+22,	"-1.1959e+22", "%g",
-__LINE__, -1.196559413116537e-28,	"-0.000000", "%6.6f",
-__LINE__, -1.197534588732952e+12,	"-1.19753e+12", "%#g",
-__LINE__, -1.200279514790649e-25,	"-0.0000", "%0.4f",
-__LINE__, -1.203806667944635e+10,	"-1.2038067E+10", "%5.7E",
-__LINE__, -1.204344885974736e+07,	"-1.204E+07", "%#2.4G",
-__LINE__, -1.205668007693083e+00,	"-1.20567", "%g",
-__LINE__, -1.205898515218947e-11,	"-1.2059e-11", "%+g",
-__LINE__, -1.206787414909373e-05,	"-1.2e-05", "%2.2g",
-__LINE__, -1.207905830366447e+15,	"-1.207906e+15", "%6.7g",
-__LINE__, -1.208067010597729e-17,	"-1.208067e-17", "%5e",
-__LINE__, -1.210189135822574e+01,	"-12", "%+2.0f",
-__LINE__, -1.211560695948122e+10,	"-1.21156e+10", "%+g",
-__LINE__, -1.214003025273234e-18,	"-1.214e-18", "%+g",
-__LINE__, -1.214096815259005e+17,	"-121409681525900459.142520", "%f",
-__LINE__, -1.214699041716797e-14,	"-1.2147E-14", "%G",
-__LINE__, -1.215061611919443e+14,	"-121506161191944.306310", "%+#f",
-__LINE__, -1.217491221065185e+27,	"-1.21749e+27", "%g",
-__LINE__, -1.218538401534388e-11,	"-1.218538e-11", "%#e",
-__LINE__, -1.218810085883466e+16,	"-1e+16", "%+.1g",
-__LINE__, -1.219422688169801e+08,	"-1.219423e+08", "%e",
-__LINE__, -1.220473194407651e-14,	"-1.2205E-14", "%1.5G",
-__LINE__, -1.220824440193375e-02,	"-0.012208", "%4f",
-__LINE__, -1.221520240637007e+13,	"-1.221520E+13", "%1E",
-__LINE__, -1.221894719843486e+29,	"-1.22189E+29", "%G",
-__LINE__, -1.223020108610281e+25,	"-1.22302E+25", "%G",
-__LINE__, -1.223203206227728e-02,	"-0.012232", "%G",
-__LINE__, -1.225661737076919e-15,	"-1.22566E-15", "%G",
-__LINE__, -1.228147221003795e-08,	"-1.22815E-08", "%G",
-__LINE__, -1.228298534591771e+20,	"-1.22830E+20", "%#G",
-__LINE__, -1.228469080229780e-02,	"-0.012285", "%0f",
-__LINE__, -1.229161950699222e-09,	"-1e-09", "%0.e",
-__LINE__, -1.231294820136559e-17,	"-1.231295E-17", "%1.7G",
-__LINE__, -1.232588663406698e-21,	"-1E-21", "%+0.G",
-__LINE__, -1.233381256982191e-26,	"-0.000000", "%f",
-__LINE__, -1.233435864835578e+14,	"-1.23344e+14", "%#g",
-__LINE__, -1.237409567806099e-25,	"-1.23741E-25", "%#G",
-__LINE__, -1.238244697758558e-02,	"-1.238245e-02", "%7e",
-__LINE__, -1.239393163123284e+26,	"-1.23939e+26", "%+g",
-__LINE__, -1.240484781756132e-18,	"-1E-18", "%4.E",
-__LINE__, -1.241420286838750e+23,	"-1E+23", "%2.E",
-__LINE__, -1.243781122052343e-18,	"-1.243781e-18", "%+e",
-__LINE__, -1.244421506844779e+07,	"-1.244422E+07", "%+6E",
-__LINE__, -1.245754054764741e-21,	"-1e-21", "%5.0g",
-__LINE__, -1.245992228426733e-24,	"-0.000000", "%f",
-__LINE__, -1.246498277739883e-12,	"-0.0000000", "%5.7f",
-__LINE__, -1.247130891343776e-18,	"-1.24713E-18", "%G",
-__LINE__, -1.247309461703025e-03,	"-0.0012473", "%#5.5G",
-__LINE__, -1.248139162966407e-29,	"-1.e-29", "%+#6.g",
-__LINE__, -1.249756153623776e+08,	"-1.249756e+08", "%e",
-__LINE__, -1.250899983565585e-10,	"-1.2509e-10", "%5g",
-__LINE__, -1.250957368798327e+19,	"-1.25096E+19", "%0G",
-__LINE__, -1.252630814464822e-02,	"-0.012526", "%+f",
-__LINE__, -1.253076368257011e-28,	"-0.000000", "%f",
-__LINE__, -1.254243507039370e+01,	"-1.254244e+01", "%e",
-__LINE__, -1.257605614492298e-12,	"-1.257606E-12", "%6.7G",
-__LINE__, -1.258041911573120e+06,	"-1258041.911573", "%+f",
-__LINE__, -1.261670983426507e-25,	"-0.00", "%.2f",
-__LINE__, -1.263216883336562e-14,	"-1.26322e-14", "%g",
-__LINE__, -1.266846944498751e-15,	"-1e-15", "%0.g",
-__LINE__, -1.266977908502326e+06,	"-1266978", "%+1.f",
-__LINE__, -1.267006162870084e-23,	"-1.267006e-23", "%e",
-__LINE__, -1.269144609375931e+01,	"-1.269145e+01", "%+e",
-__LINE__, -1.269458714257904e+25,	"-1.26946E+25", "%G",
-__LINE__, -1.276697325772662e-02,	"-0.0128", "%7.3G",
-__LINE__, -1.278855081807602e+15,	"-1278855081807601.87891", "%#0.5f",
-__LINE__, -1.278966821639612e+20,	"-1.278967E+20", "%3E",
-__LINE__, -1.281942705258106e+03,	"-1281.94", "%+G",
-__LINE__, -1.282331291499203e+14,	"-128233129149920.266343", "%+f",
-__LINE__, -1.285125739341808e-28,	"-1.28513e-28", "%g",
-__LINE__, -1.285700693704978e+11,	"-1.285701E+11", "%E",
-__LINE__, -1.286574096459251e+28,	"-1.287E+28", "%6.4G",
-__LINE__, -1.287967889247240e+03,	"-1287.97", "%G",
-__LINE__, -1.288913808801319e-27,	"-1.3e-27", "%7.1e",
-__LINE__, -1.289147517760377e-18,	"-1.289148E-18", "%E",
-__LINE__, -1.289355006600107e+23,	"-1.28936E+23", "%+G",
-__LINE__, -1.291232014623979e+01,	"-1.29123E+01", "%+.5E",
-__LINE__, -1.293658562875966e-18,	"-1.29366e-18", "%+g",
-__LINE__, -1.294982911983638e-19,	"-1.29498E-19", "%#G",
-__LINE__, -1.296123363481695e-13,	"-1.296123E-13", "%E",
-__LINE__, -1.296632862070602e-20,	"-1.29663e-20", "%+g",
-__LINE__, -1.297801639022777e+23,	"-129780163902277735132884.11777", "%#0.5f",
-__LINE__, -1.297886574534611e+16,	"-1.297887e+16", "%+e",
-__LINE__, -1.300588216308401e+11,	"-1.30e+11", "%.2e",
-__LINE__, -1.301296100909062e-10,	"-1.3013e-10", "%+g",
-__LINE__, -1.303144244306468e-07,	"-1.303144E-07", "%E",
-__LINE__, -1.304096315024042e-20,	"-1.3041E-20", "%+G",
-__LINE__, -1.304817970675085e+16,	"-1.304818E+16", "%+E",
-__LINE__, -1.304870304632683e-15,	" -1e-15", "%7.g",
-__LINE__, -1.305213586757638e-18,	"-1.30521e-18", "%g",
-__LINE__, -1.306880734910465e-22,	"-1.306881E-22", "%E",
-__LINE__, -1.308964092631446e-23,	"-1.30896e-23", "%g",
-__LINE__, -1.312070555198201e+26,	"-131207055519820126043839537", "%+7.f",
-__LINE__, -1.312511609151056e-30,	"-1.312512E-30", "%#E",
-__LINE__, -1.313087359008389e-23,	"-0.000000", "%+f",
-__LINE__, -1.316948423042059e-02,	"-1.316948E-02", "%+E",
-__LINE__, -1.317080882577385e+29,	"-1.317E+29", "%+.4G",
-__LINE__, -1.317514598984346e+24,	"-1.317515e+24", "%e",
-__LINE__, -1.317817551125923e-21,	"-1.31782E-21", "%+G",
-__LINE__, -1.319603985988120e+29,	"-131960398598811989856471882376.354188", "%f",
-__LINE__, -1.328850458671907e+06,	"-1e+06", "%.0e",
-__LINE__, -1.328945346449817e-23,	"-1.328945e-23", "%+e",
-__LINE__, -1.330146584094221e-08,	"-1e-08", "%+5.g",
-__LINE__, -1.332609617892115e+00,	"-1.33261", "%2.7G",
-#ifndef __PCCNECV70__
-__LINE__, -1.332751724965715e+22,	"-13327517249657150344432.920974", "%f",
-__LINE__, -1.333194379353273e-19,	"-0.000000", "%f",
-__LINE__, -1.334304387932777e-06,	"-1.334304e-06", "%e",
-__LINE__, -1.334306581172082e-05,	"-1.3e-05", "%+1.2g",
-__LINE__, -1.335283510893438e-05,	" -1E-05", "%7.G",
-__LINE__, -1.337939692108373e+11,	"-1.33794e+11", "%+4g",
-__LINE__, -1.339117288874809e-03,	"-0.001", "%1.3f",
-__LINE__, -1.340100588141492e+27,	"-1.340101E+27", "%E",
-__LINE__, -1.341953272572953e-19,	"-0.000000", "%+f",
-__LINE__, -1.343058354301620e-02,	"-1.343058e-02", "%e",
-__LINE__, -1.346662720871543e+22,	"-1.34666E+22", "%#G",
-__LINE__, -1.354010578652210e-02,	"-0.0135401", "%#g",
-__LINE__, -1.354066549307666e-12,	"    -0", "%+6.f",
-__LINE__, -1.355284719365947e+21,	"-1.35528e+21", "%g",
-__LINE__, -1.356326532145087e+29,	"-1E+29", "%4.G",
-__LINE__, -1.357278618897291e+19,	"-13572786188972911780.581398", "%f",
-__LINE__, -1.357537331348202e-10,	"-0.000", "%+.3f",
-__LINE__, -1.360011287595868e-10,	"-0.000000", "%f",
-__LINE__, -1.360506902899232e+16,	"-13605069028992320.", "%#5.f",
-__LINE__, -1.361102570277000e+10,	"-1.3611E+10", "%G",
-__LINE__, -1.362601255900219e+07,	"-1.363E+07", "%.4G",
-__LINE__, -1.366078182354771e+10,	"-1.36608E+10", "%0G",
-__LINE__, -1.366667926615127e+08,	"-136666792.661513", "%f",
-__LINE__, -1.367162823743231e-12,	"-0.000000", "%#f",
-__LINE__, -1.371523037550709e+09,	"-1.37152e+09", "%+g",
-__LINE__, -1.374328925986197e-17,	"-1.37e-17", "%.2e",
-__LINE__, -1.374995603898421e-26,	"-1.375e-26", "%+g",
-__LINE__, -1.376726539375688e+09,	"-1.376727E+09", "%+E",
-__LINE__, -1.378351117694958e-13,	"-0.000000", "%f",
-__LINE__, -1.378514699313619e-14,	"-1.378515e-14", "%e",
-__LINE__, -1.379347588942324e-23,	"-1.4e-23", "%+.1e",
-__LINE__, -1.380380583822272e-17,	"-0.000000", "%+f",
-__LINE__, -1.381658659947406e+19,	"-1.38166e+19", "%g",
-__LINE__, -1.382775316390237e+29,	"-138277531639023653298181670834.3104", "%+#7.4f",
-__LINE__, -1.383541138922400e+00,	"-1.383541E+00", "%E",
-__LINE__, -1.384625301445090e+01,	"-13.8", "%+.3g",
-__LINE__, -1.386844086284027e-13,	"-1.38684E-13", "%+G",
-__LINE__, -1.386930516448650e-28,	"-1.386931E-28", "%E",
-__LINE__, -1.387444896054260e-07,	"-1.38744E-07", "%G",
-__LINE__, -1.389685107980798e+22,	"-1.38969E+22", "%G",
-__LINE__, -1.390880300369347e+03,	"-1390.880300", "%f",
-__LINE__, -1.391423370198150e-17,	"-1E-17", "%+2.G",
-__LINE__, -1.394441767471218e-09,	"-1.394442e-09", "%e",
-__LINE__, -1.396275525062527e-20,	"-1.39628E-20", "%G",
-__LINE__, -1.397045957455157e+24,	"-1E+24", "%.0E",
-__LINE__, -1.397458546930799e+21,	"-1397458546930798526375.383517", "%f",
-__LINE__, -1.397584578988941e-14,	"-1.39758e-14", "%5g",
-__LINE__, -1.397789397300823e+09,	"-1.398e+09", "%.4g",
-__LINE__, -1.398167472294874e+21,	"-1.398167E+21", "%+7E",
-__LINE__, -1.398809636136688e-16,	"-0.000000", "%+f",
-__LINE__, -1.399545335304119e+26,	"-139954533530411872277454676.805064", "%#5f",
-__LINE__, -1.400102603335755e+20,	"-140010260333575509150.705329", "%2f",
-__LINE__, -1.401212746235235e+04,	"-1.401213e+04", "%e",
-__LINE__, -1.404409427681801e+07,	"-1E+07", "%4.E",
-__LINE__, -1.406018114263948e-25,	"-1e-25", "%3.e",
-__LINE__, -1.406245608096877e-06,	"-1.4e-06", "%+.1e",
-__LINE__, -1.410697254683835e-10,	"-1.410697e-10", "%e",
-__LINE__, -1.410739097553846e+25,	"-1.410739E+25", "%+E",
-__LINE__, -1.410850631189577e+04,	"-14108.5", "%.6g",
-__LINE__, -1.411680434455781e+28,	"-14116804344557807304738616949.180141", "%f",
-__LINE__, -1.413309465660099e-27,	"-1.413309E-27", "%+#E",
-__LINE__, -1.418468741386300e+09,	"-1418468741.386300", "%f",
-__LINE__, -1.420277110892909e+06,	"-1.42028e+06", "%1g",
-__LINE__, -1.420417889565590e-17,	"-1.42E-17", "%.2E",
-__LINE__, -1.421098212056305e+08,	"-1.421098e+08", "%4e",
-__LINE__, -1.421792812798986e-20,	" -1E-20", "%7.G",
-__LINE__, -1.423675488122461e+18,	"-1423675488122461363.360571", "%f",
-__LINE__, -1.423810545840653e+15,	"-1E+15", "%3.E",
-__LINE__, -1.424242673476368e-15,	"-1.424243e-15", "%e",
-__LINE__, -1.427847435688733e-01,	"-1.427847E-01", "%E",
-__LINE__, -1.433897734612555e-04,	"-0.0001", "%3.g",
-__LINE__, -1.434537754075696e-24,	"-1.435E-24", "%+0.3E",
-__LINE__, -1.434774864809324e-24,	"-1E-24", "%2.E",
-__LINE__, -1.435583851565142e-11,	"-1E-11", "%.0E",
-__LINE__, -1.438791024010112e+11,	"-1.43879e+11", "%#.6g",
-__LINE__, -1.439267565343777e+27,	"-1.4e+27", "%2.1e",
-__LINE__, -1.439440602670449e+02,	"-143.944", "%G",
-__LINE__, -1.439494412124925e+13,	"-14394944121249.251268", "%f",
-__LINE__, -1.440032823245152e+10,	"-14400328232.451516", "%f",
-__LINE__, -1.440174494009562e-08,	"-0.000000", "%7f",
-__LINE__, -1.440827804010568e+07,	"-1.E+07", "%#6.1G",
-__LINE__, -1.442760907195336e+09,	"-1.44276E+09", "%+5G",
-__LINE__, -1.444655304181403e+10,	"-14446553041.814035", "%7f",
-__LINE__, -1.444995766787036e+04,	"-14450", "%5G",
-__LINE__, -1.445078682874535e-13,	"-1E-13", "%3.E",
-__LINE__, -1.446781469662328e+01,	"-14.4678", "%G",
-__LINE__, -1.447795251395321e-04,	"-0.000145", "%+f",
-__LINE__, -1.448193079247108e-02,	"-0.014", "%4.2G",
-__LINE__, -1.449552967961345e+14,	"-1E+14", "%1.E",
-__LINE__, -1.451269763513571e+10,	"-14512697635.135705", "%6f",
-__LINE__, -1.451843176990292e+12,	"-1e+12", "%1.g",
-__LINE__, -1.452631405935931e+06,	"-1.452631e+06", "%e",
-__LINE__, -1.452753650285897e+21,	"-1452753650285897091265.496783", "%5f",
-__LINE__, -1.453811512433860e-05,	"-1e-05", "%+6.g",
-__LINE__, -1.454071430557372e+13,	"-1.4541E+13", "%.4E",
-__LINE__, -1.455956079562999e+03,	"-1455.96", "%G",
-__LINE__, -1.459712196146602e-17,	"-1.45971e-17", "%g",
-__LINE__, -1.461857733495947e-02,	"-1.4619E-02", "%.4E",
-__LINE__, -1.465257069090911e-11,	"-1.465257E-11", "%+E",
-__LINE__, -1.465306607257042e+05,	"-146531", "%g",
-__LINE__, -1.465857076315921e+20,	"-1.46586E+20", "%+G",
-__LINE__, -1.467919792051489e+16,	"-1.46792e+16", "%2g",
-__LINE__, -1.469271519834567e+20,	"-146927151983456720785", "%+.0f",
-__LINE__, -1.472961447442697e-28,	"-1.47296e-28", "%#g",
-__LINE__, -1.473385695190456e-12,	"-1.473386E-12", "%E",
-__LINE__, -1.485003089033267e-10,	"-1.485E-10", "%2G",
-__LINE__, -1.490541379072390e-18,	"-1.490541E-18", "%4E",
-__LINE__, -1.490683434793125e+22,	"-14906834347931249951102.472551", "%#f",
-__LINE__, -1.498356837215425e+20,	"-1.49836E+20", "%#G",
-__LINE__, -1.498677007818122e+14,	"-1.49868E+14", "%+4G",
-__LINE__, -1.502143197677119e+23,	"-150214319767711934616727.", "%#7.f",
-__LINE__, -1.503563770470753e-24,	"-1.50356e-24", "%.6g",
-__LINE__, -1.504643092793197e-18,	"-1.504643e-18", "%+4e",
-__LINE__, -1.507017706254022e-13,	"-1.50702e-13", "%+g",
-__LINE__, -1.507054033750081e-22,	"-0.000000", "%f",
-__LINE__, -1.508662346022339e+16,	"-1.508662E+16", "%#E",
-__LINE__, -1.509366882438902e+08,	"-2e+08", "%4.g",
-__LINE__, -1.511086567087967e+20,	"-1.51109e+20", "%g",
-__LINE__, -1.514959134622707e-18,	"-0.000000", "%+f",
-__LINE__, -1.515730120364204e+06,	"-2E+06", "%0.G",
-__LINE__, -1.516372763118606e-09,	"-1.51637e-09", "%g",
-__LINE__, -1.520610443546204e+27,	"-1.52061e+27", "%g",
-__LINE__, -1.522040655642012e+11,	"-1.52204E+11", "%+2G",
-__LINE__, -1.523772495014966e-24,	"-2E-24", "%2.G",
-__LINE__, -1.523980825983892e-05,	"-0.000", "%2.3f",
-__LINE__, -1.526696214603152e-03,	"-0.0015267", "%+6.5G",
-__LINE__, -1.528680540769583e+00,	"-1.5287", "%0.5G",
-__LINE__, -1.529951830525433e+08,	"-1.529952e+08", "%+e",
-__LINE__, -1.533052896559935e+05,	"-153305", "%4.0f",
-__LINE__, -1.533829640475152e-03,	"-0.00153383", "%+#g",
-__LINE__, -1.535617804643105e-30,	"-1.535618e-30", "%e",
-__LINE__, -1.537623698361821e+16,	"-15376236983618207.7875719", "%4.7f",
-__LINE__, -1.544994895330616e+24,	"-1.54499e+24", "%g",
-__LINE__, -1.545083356728403e+17,	"-1.545083e+17", "%e",
-__LINE__, -1.545684535393879e+12,	"-1.55E+12", "%3.3G",
-__LINE__, -1.545878334099427e+13,	"-15458783340994.268762", "%1f",
-__LINE__, -1.547697185980564e-18,	"-1.5477e-18", "%.6g",
-__LINE__, -1.548576527172579e-29,	"-1.5E-29", "%2.2G",
-__LINE__, -1.549712227835891e+08,	"-1.549712e+08", "%#6.7g",
-__LINE__, -1.550010819435335e-21,	"-1.55001E-21", "%G",
-__LINE__, -1.551412476164257e+14,	"-1.551412E+14", "%E",
-__LINE__, -1.553156638090030e+01,	" -2E+01", "%7.G",
-__LINE__, -1.553733233064355e-01,	"-0.2", "%3.g",
-__LINE__, -1.558391111609365e+00,	"-1.558391", "%+f",
-__LINE__, -1.562004019284766e+15,	"-1.562E+15", "%6.5G",
-__LINE__, -1.562195733239758e-16,	"-0.000000", "%f",
-__LINE__, -1.563953339012525e-14,	"-1.56395E-14", "%1G",
-__LINE__, -1.568317638534983e+18,	"-1.56832E+18", "%1G",
-__LINE__, -1.568546851135348e+04,	"-15685.5", "%+#G",
-__LINE__, -1.574297872228857e+18,	"-1.574298e+18", "%e",
-__LINE__, -1.575696460196291e-21,	"-1.5757E-21", "%G",
-__LINE__, -1.576324848379791e+25,	"-1.57632E+25", "%+G",
-__LINE__, -1.577524395140843e+06,	"-1.5775E+06", "%.5G",
-__LINE__, -1.585122856675091e+12,	"-1585122856675.091452", "%f",
-__LINE__, -1.586734674395556e-02,	"-1.586735E-02", "%E",
-__LINE__, -1.592602264315192e+22,	"-1.5926E+22", "%G",
-__LINE__, -1.594121556700562e+05,	"-2E+05", "%+.0G",
-__LINE__, -1.598538116193430e+22,	"-1.59854e+22", "%+g",
-__LINE__, -1.605647463222382e+18,	"-1.6056E+18", "%.5G",
-__LINE__, -1.610891449201191e+06,	"-1.6109E+06", "%#6.4E",
-__LINE__, -1.614593168166818e-05,	"-1.61459E-05", "%G",
-__LINE__, -1.615597722557325e-03,	"-0.001616", "%f",
-__LINE__, -1.616038022182124e-29,	"-1.61604E-29", "%1G",
-__LINE__, -1.618380771451625e-28,	"-2e-28", "%+1.g",
-__LINE__, -1.620287456872150e+10,	"-1.620e+10", "%#7.3e",
-__LINE__, -1.620469955611903e-29,	"-0.000000", "%f",
-__LINE__, -1.622580720690927e+20,	"-1.622581E+20", "%+#E",
-__LINE__, -1.622752500991079e-12,	"-1.622753E-12", "%E",
-__LINE__, -1.622771933776459e+08,	"-1.6228E+08", "%+4.4E",
-__LINE__, -1.623894567037391e+09,	"-1.623895e+09", "%#e",
-__LINE__, -1.624021408185354e-25,	"-1.624E-25", "%.5G",
-__LINE__, -1.624405320939366e-06,	"-1.62441e-06", "%+#g",
-__LINE__, -1.631236208958857e-25,	"-1.631236e-25", "%#e",
-__LINE__, -1.632165969536046e+20,	"-1.63217E+20", "%G",
-__LINE__, -1.632859596256475e+06,	"-1.63286E+06", "%G",
-__LINE__, -1.634371961703112e+06,	"-1.634372E+06", "%+E",
-__LINE__, -1.637230383641845e+24,	"-1.63723e+24", "%#g",
-__LINE__, -1.638081480475853e+17,	"-1.63808e+17", "%+g",
-__LINE__, -1.638279690467673e+14,	"-163827969046767.325523", "%#f",
-__LINE__, -1.640360249548215e-29,	"-1.64036e-29", "%+6.6g",
-__LINE__, -1.645691728060833e-30,	"-1.64569e-30", "%g",
-__LINE__, -1.648548965852592e-03,	"   -0", "%5.f",
-__LINE__, -1.650100957771182e+21,	"-1650100957771182308420.065965", "%+f",
-__LINE__, -1.650957176011913e-02,	"-0.016510", "%#4.5G",
-__LINE__, -1.651165108095301e+29,	"-165116510809530137038336761179.380119", "%f",
-__LINE__, -1.657132845094847e-06,	"-0.000002", "%f",
-__LINE__, -1.657152146172541e+12,	"-1.657152E+12", "%.7G",
-__LINE__, -1.658377345516132e-06,	"-0.00", "%.2f",
-__LINE__, -1.658850468902324e+20,	"-1.659e+20", "%.4g",
-__LINE__, -1.661723557149830e+18,	"-1.66172E+18", "%G",
-__LINE__, -1.663570885140273e+14,	"-166357088514027", "%2.f",
-__LINE__, -1.665186944896906e+25,	"-1.66519E+25", "%G",
-__LINE__, -1.675910137717036e+22,	"-2e+22", "%5.g",
-__LINE__, -1.677447987675587e-15,	"-1.67745E-15", "%G",
-__LINE__, -1.677510590697220e+06,	"-1677510.590697", "%5f",
-__LINE__, -1.677658141289510e-18,	"-2E-18", "%+5.G",
-__LINE__, -1.678316848066192e-03,	"-1.678317E-03", "%E",
-__LINE__, -1.681506404024821e+24,	"-1.68151E+24", "%G",
-__LINE__, -1.688584243722160e+12,	"-1.68858E+12", "%+#G",
-__LINE__, -1.689468295411408e+28,	"-1.68947E+28", "%+G",
-__LINE__, -1.690746767470207e-11,	"-1.69075E-11", "%G",
-__LINE__, -1.692773960755248e-14,	"-2E-14", "%4.E",
-__LINE__, -1.693349092740995e-18,	"-1.69335e-18", "%g",
-__LINE__, -1.693642321808920e-26,	"-1.69364E-26", "%G",
-__LINE__, -1.694579128700042e-12,	"-0.000000", "%f",
-__LINE__, -1.695454897264717e-08,	"-1.7E-08", "%+4.3G",
-__LINE__, -1.695733278397589e+19,	"-1.695733e+19", "%4e",
-__LINE__, -1.699522534409388e-05,	"-1.69952E-05", "%G",
-__LINE__, -1.701752039544919e+00,	"-2", "%.0f",
-__LINE__, -1.702304998615036e+16,	"-1.7023E+16", "%1G",
-__LINE__, -1.703113580904556e-25,	"-1.703114e-25", "%+e",
-__LINE__, -1.705165515454546e+29,	"-1.705166e+29", "%+e",
-__LINE__, -1.707392568277288e-05,	"-1.70739E-05", "%G",
-__LINE__, -1.707477319256742e+09,	"-1707477319.26", "%7.2f",
-__LINE__, -1.709669107513969e-03,	" -0.002", "%7.g",
-__LINE__, -1.713284011412432e-24,	"-1.713e-24", "%3.3e",
-__LINE__, -1.715512203951086e-28,	"-1.715512E-28", "%E",
-__LINE__, -1.716880832248879e+13,	"-1.71688e+13", "%+g",
-__LINE__, -1.720722835740680e-15,	"-1.7E-15", "%.1E",
-__LINE__, -1.721855769574895e+07,	"-17218557.695749", "%3f",
-__LINE__, -1.722449437415368e+01,	"-1.722449e+01", "%e",
-__LINE__, -1.723218805116591e-29,	"-2e-29", "%.0g",
-__LINE__, -1.726129004920195e-05,	"-1.72613E-05", "%0G",
-__LINE__, -1.727400228037571e-28,	"-0.0000000", "%2.7f",
-__LINE__, -1.730008745782339e-23,	"-1.73e-23", "%.4g",
-__LINE__, -1.731875670201859e+09,	"-1.73188E+09", "%G",
-__LINE__, -1.732142976428085e+10,	"-2E+10", "%+6.0E",
-__LINE__, -1.732699651229194e-02,	"-0.017327", "%5g",
-__LINE__, -1.734772870736446e-12,	"-0.000000", "%+f",
-__LINE__, -1.738576887938331e+09,	"-1.73858e+09", "%g",
-__LINE__, -1.738759937912438e-08,	"-1.73876e-08", "%+2g",
-__LINE__, -1.739320154069143e-18,	"-0.0000", "%1.4f",
-__LINE__, -1.739870415800800e+16,	"-1.73987e+16", "%g",
-__LINE__, -1.741290506928618e+04,	"-17412.9", "%G",
-__LINE__, -1.742520800031913e+29,	"-1.742521e+29", "%7e",
-__LINE__, -1.747620095195231e+01,	"-2e+01", "%+2.g",
-__LINE__, -1.749860675924882e-21,	"-1.74986E-21", "%G",
-__LINE__, -1.752675363661431e-06,	"-1.7527E-06", "%.5G",
-__LINE__, -1.752871508059699e-06,	"     -0", "%7.f",
-__LINE__, -1.755178530989839e+25,	"-1.7551785e+25", "%1.7e",
-__LINE__, -1.755566213249512e-07,	"-1.755566e-07", "%.6e",
-__LINE__, -1.756193485005071e-24,	"-1.75619E-24", "%+2.6G",
-__LINE__, -1.758501410496218e+03,	"-1758.501", "%.7G",
-__LINE__, -1.758795617219102e+20,	"-1.75880E+20", "%#6G",
-__LINE__, -1.760538679276709e+03,	"-2e+03", "%+1.e",
-__LINE__, -1.762660914833003e+27,	"-1.76266E+27", "%G",
-__LINE__, -1.765122691141907e+19,	"-17651226911419071186.1", "%5.1f",
-__LINE__, -1.765313277389086e-18,	"-2E-18", "%+1.E",
-__LINE__, -1.765821717148734e+19,	"-1.76582E+19", "%G",
-__LINE__, -1.767048687863149e-17,	"-1.77E-17", "%+.3G",
-__LINE__, -1.768661645451962e+18,	"-1.77E+18", "%+.3G",
-__LINE__, -1.769753257452233e+01,	"-17.6975", "%G",
-__LINE__, -1.770945665065531e+28,	"-1.770946E+28", "%0.7G",
-__LINE__, -1.776713865753894e-09,	"-2e-09", "%1.g",
-__LINE__, -1.778424845787448e+03,	"-1.7784E+03", "%.4E",
-__LINE__, -1.779060610701250e+06,	"-1.779061E+06", "%E",
-__LINE__, -1.781447182110762e-27,	"-1.781447E-27", "%E",
-__LINE__, -1.782655842123784e-13,	"-2.E-13", "%#2.1G",
-__LINE__, -1.783071018169166e+16,	"-17830710181691664.217851", "%+f",
-__LINE__, -1.784665985294415e+25,	"-2E+25", "%3.G",
-__LINE__, -1.787297600658096e+25,	"-2E+25", "%+5.E",
-__LINE__, -1.788200250255718e+12,	"-1.7882E+12", "%2.4E",
-__LINE__, -1.792860730579114e-09,	"-1.79286E-09", "%G",
-__LINE__, -1.793122797100936e+24,	"-1.793123e+24", "%e",
-__LINE__, -1.793761706915029e-25,	"-0.000000", "%f",
-__LINE__, -1.793947567431932e+22,	"-1.79395e+22", "%g",
-__LINE__, -1.796428035404303e-18,	"-1.79643e-18", "%g",
-__LINE__, -1.797113144273918e-16,	"-1.79711E-16", "%.6G",
-__LINE__, -1.798796767828424e-29,	"-1.7988E-29", "%G",
-__LINE__, -1.805004010633763e-11,	"-1.805e-11", "%2.5g",
-__LINE__, -1.806936269752338e-26,	"-1.80694e-26", "%g",
-__LINE__, -1.807122541760172e-10,	"-1.80712e-10", "%g",
-__LINE__, -1.808295407815630e-06,	"-1.8083E-06", "%+G",
-__LINE__, -1.813893236685959e+15,	"-1813893236685959", "%0.f",
-__LINE__, -1.816201530145367e+06,	"-1816202", "%+2.f",
-__LINE__, -1.822811219123512e+13,	"-1.82281e+13", "%g",
-__LINE__, -1.826276499170243e-25,	"-2E-25", "%+3.G",
-__LINE__, -1.832399287433839e-26,	"-1.832399E-26", "%#4E",
-__LINE__, -1.833597815584463e-18,	"-0.000000", "%+3f",
-__LINE__, -1.834165532712233e+28,	"-1.834166E+28", "%.7G",
-__LINE__, -1.837633147831083e+28,	"-1.8376331e+28", "%.7e",
-__LINE__, -1.839756716742518e-01,	"-0.2", "%+0.G",
-__LINE__, -1.840101206950368e-14,	"-1.840101E-14", "%+E",
-__LINE__, -1.842043645474877e+17,	"-1.84204e+17", "%+g",
-__LINE__, -1.842155892969934e+17,	"-1.84216e+17", "%+g",
-__LINE__, -1.843566073012842e-25,	"-1.84357E-25", "%G",
-__LINE__, -1.843976321320497e-02,	"-0.02", "%+4.2f",
-__LINE__, -1.845299931651554e+11,	"-1.8453E+11", "%0.4E",
-__LINE__, -1.846199038659889e-06,	"-1.8462e-06", "%0.5g",
-__LINE__, -1.847062180184169e-30,	"-1.847062E-30", "%5E",
-__LINE__, -1.847962158722201e-16,	"-0.000000", "%f",
-__LINE__, -1.849446376756582e+15,	"-1.8E+15", "%2.2G",
-__LINE__, -1.853168465523878e-24,	"-2E-24", "%1.E",
-__LINE__, -1.853601367230139e+10,	"-1.853601e+10", "%e",
-__LINE__, -1.857367903775364e+18,	"-1.86E+18", "%1.3G",
-__LINE__, -1.858332820633906e-05,	"-0.000019", "%7f",
-__LINE__, -1.860243811657223e-23,	"-1.860244e-23", "%e",
-__LINE__, -1.860660612539794e+08,	"-1.86066e+08", "%+6.5e",
-__LINE__, -1.861160816251124e-09,	"-2E-09", "%1.G",
-__LINE__, -1.862380636974688e-25,	"-1.9E-25", "%.2G",
-__LINE__, -1.864168808453004e+15,	"-1.86417E+15", "%G",
-__LINE__, -1.864273144411246e+07,	"-1.86427e+07", "%g",
-__LINE__, -1.864929236615802e-02,	"-2e-02", "%+3.e",
-__LINE__, -1.865010503480847e+19,	"-2E+19", "%4.G",
-__LINE__, -1.866276374553144e+22,	"-1.866276e+22", "%e",
-__LINE__, -1.870809567910649e+09,	"-1.870810e+09", "%e",
-__LINE__, -1.872555495839008e-13,	"-1.872555E-13", "%3E",
-__LINE__, -1.874465717110388e-22,	"-1.874466E-22", "%E",
-__LINE__, -1.874916306627632e+21,	"-1874916306627632422987.517202", "%f",
-__LINE__, -1.875804322194491e-23,	"-0.000000", "%+f",
-__LINE__, -1.876662099198587e-04,	"-0.000187666", "%G",
-__LINE__, -1.876775504795760e-25,	"-1.87678e-25", "%0g",
-__LINE__, -1.879343051002554e-20,	"   -0.", "%#6.f",
-__LINE__, -1.881535445774717e-15,	"-1.881535e-15", "%e",
-__LINE__, -1.887515901404300e+00,	"-1.888", "%2.4G",
-__LINE__, -1.887730637149009e+17,	"-1.887731E+17", "%E",
-__LINE__, -1.889920303480086e+17,	"-1.889920e+17", "%+e",
-__LINE__, -1.891903478784091e+04,	"-1.891903e+04", "%e",
-__LINE__, -1.893550084305833e+16,	"-1.89355e+16", "%g",
-__LINE__, -1.894675230197676e+05,	"-1.894675e+05", "%#e",
-__LINE__, -1.898389624953187e-27,	"-1.898390e-27", "%+e",
-__LINE__, -1.899250044644046e+21,	"-1899250044644046120367.875119", "%+4.6f",
-__LINE__, -1.904187609804679e-02,	"-1.90419E-02", "%0.5E",
-__LINE__, -1.904452538421193e-04,	"-2e-04", "%4.0e",
-__LINE__, -1.904615326969061e-16,	"-1.904615e-16", "%1.7g",
-__LINE__, -1.907761255064750e+02,	"-190.776126", "%f",
-__LINE__, -1.910727641826707e-10,	" -2e-10", "%7.g",
-__LINE__, -1.913149279262051e+15,	"-1.913149e+15", "%.7g",
-__LINE__, -1.913235739298009e+28,	"-1.913236e+28", "%e",
-__LINE__, -1.913526822735271e+18,	"-1.914e+18", "%.4g",
-__LINE__, -1.913780977515583e+17,	"-191378097751558335.9150", "%5.4f",
-__LINE__, -1.917095456962182e-10,	"-2E-10", "%4.G",
-__LINE__, -1.918803033972851e+23,	"-191880303397285132405158.947222", "%f",
-__LINE__, -1.926420984801848e+16,	"-19264209848018483.128840", "%+f",
-__LINE__, -1.931905465942639e-10,	"-1.93191e-10", "%g",
-__LINE__, -1.932907105840252e+06,	"-1.932907e+06", "%+#e",
-__LINE__, -1.933091601918916e+15,	"-1.933092E+15", "%#E",
-__LINE__, -1.934296184983361e+09,	"-1.9343e+09", "%1.6g",
-__LINE__, -1.934637311832448e+11,	"-1.93464e+11", "%+g",
-__LINE__, -1.936201483262186e+12,	"-2e+12", "%+6.g",
-__LINE__, -1.939114661603911e+19,	"-1.93911E+19", "%G",
-__LINE__, -1.940478182124347e-13,	"-0.000000", "%f",
-__LINE__, -1.943218220654923e+08,	"-2E+08", "%+5.0G",
-__LINE__, -1.943526872455779e-30,	"-1.9E-30", "%.1E",
-__LINE__, -1.949869164681357e+19,	"-1.949869e+19", "%#3e",
-__LINE__, -1.954181060535402e+23,	"-1.954181e+23", "%e",
-__LINE__, -1.961581555579142e+14,	"-1.962E+14", "%.3E",
-__LINE__, -1.964535562036915e+07,	"-1.96454E+07", "%G",
-__LINE__, -1.969749653575926e+04,	"-19697.5", "%.6g",
-__LINE__, -1.973475369169053e+15,	"-1.97348e+15", "%g",
-__LINE__, -1.975658532866600e-21,	"-2e-21", "%+1.2g",
-__LINE__, -1.984050343831260e+09,	"-1.984050E+09", "%E",
-__LINE__, -1.984422410018571e+12,	"-1.984422e+12", "%+4.7g",
-__LINE__, -1.984878687667223e-22,	"-0.000000", "%f",
-__LINE__, -1.986116930967811e-28,	"-1.98612e-28", "%g",
-__LINE__, -1.986774457812683e+02,	"-1.986774e+02", "%e",
-__LINE__, -1.987274814938726e-04,	"-0.000198727", "%g",
-__LINE__, -1.987319200580415e+10,	"-1.987319E+10", "%E",
-__LINE__, -1.987980768698114e-19,	"-0.000000", "%3f",
-__LINE__, -1.994698965044602e-29,	"-2E-29", "%+4.0G",
-__LINE__, -1.997833122667050e+26,	"-1.99783E+26", "%G",
-__LINE__, -1.999453681184129e-10,	"-0.00000", "%.5f",
-__LINE__, -1.999897345839745e-16,	"-1.9999e-16", "%g",
-__LINE__, -2.003703825123989e-22,	"-0.000000", "%f",
-__LINE__, -2.004569188274957e-23,	"-2.00457E-23", "%G",
-__LINE__, -2.005911883189058e+07,	"-2.00591E+07", "%G",
-__LINE__, -2.006438312005722e-25,	"-2.006e-25", "%0.4g",
-__LINE__, -2.017322171210280e+18,	"-2.01732E+18", "%+0G",
-__LINE__, -2.017718635819594e-06,	"-2.01772e-06", "%5g",
-__LINE__, -2.019187445568160e-12,	"-0.00", "%.2f",
-__LINE__, -2.021022665608503e+25,	"-20210226656085028551501636.684", "%2.3f",
-__LINE__, -2.022720393474145e+07,	"-2.02272E+07", "%#G",
-__LINE__, -2.024506694471065e+23,	"-2.02451E+23", "%G",
-__LINE__, -2.024884686553821e-15,	" -2e-15", "%7.g",
-__LINE__, -2.027484636128966e-23,	"-2.0275E-23", "%.5G",
-__LINE__, -2.028185530467237e+21,	"-2028185530467237374097.067", "%+4.3f",
-__LINE__, -2.028388905566873e-09,	"-0.000000", "%f",
-__LINE__, -2.029856507431584e-17,	"-2.02986E-17", "%G",
-__LINE__, -2.029891733449167e+27,	"-2029891733449166846270372843.7190875", "%3.7f",
-__LINE__, -2.031933616694469e+14,	"-2.031934E+14", "%#E",
-__LINE__, -2.034011738471413e-10,	"-2.03401E-10", "%#G",
-__LINE__, -2.036087355975756e+29,	"-203608735597575574161055556032.806635", "%+f",
-__LINE__, -2.036355025137273e+09,	"-2.036355E+09", "%#.7G",
-__LINE__, -2.038423730536878e+12,	"-2E+12", "%4.G",
-__LINE__, -2.045209202278810e+23,	"-2.045209e+23", "%+#e",
-__LINE__, -2.046794083517423e-06,	"-2.04679e-06", "%g",
-__LINE__, -2.048042459678599e-19,	"-0.000000", "%f",
-__LINE__, -2.050526462096153e+18,	"-2.05053e+18", "%+g",
-__LINE__, -2.053583900249402e+13,	"-2.053584e+13", "%0.7g",
-__LINE__, -2.054342100957522e-23,	"-2.05434E-23", "%#G",
-__LINE__, -2.054793400141025e+11,	"-205479340014.1", "%+2.1f",
-__LINE__, -2.059200689196498e-11,	"-0.000000", "%#f",
-__LINE__, -2.060960692728114e-16,	"-0.000000", "%+f",
-__LINE__, -2.061417528654300e-30,	"-2.06E-30", "%.3G",
-__LINE__, -2.061513401198340e-29,	"-2.06151e-29", "%7g",
-__LINE__, -2.061846698845984e+27,	"-2.061847E+27", "%E",
-__LINE__, -2.063922242876789e-19,	"-2.06392e-19", "%#g",
-__LINE__, -2.065359431805529e+03,	"-2065.359432", "%f",
-__LINE__, -2.065529069992156e-04,	"-0.000206553", "%+G",
-__LINE__, -2.066082546490980e-25,	"-2.06608e-25", "%5g",
-__LINE__, -2.068394312095200e+17,	"-2.068394e+17", "%e",
-__LINE__, -2.071024178556425e-10,	"-2.07102E-10", "%G",
-__LINE__, -2.074401605950382e-22,	"-2.07e-22", "%1.3g",
-__LINE__, -2.074731895144874e-26,	"-2.07473E-26", "%G",
-__LINE__, -2.074895800882730e+18,	"-2074895800882730068.082083", "%+f",
-__LINE__, -2.077336220500764e-30,	"-0", "%2.f",
-__LINE__, -2.078067878561077e+09,	"-2.0781e+09", "%0.5g",
-__LINE__, -2.080497889634533e+15,	"-2.080498E+15", "%4E",
-__LINE__, -2.084717279367594e-21,	"-2.08472e-21", "%+g",
-__LINE__, -2.087827915301948e+29,	"-2E+29", "%6.1G",
-__LINE__, -2.090268686389680e+05,	"-2.090269e+05", "%1e",
-__LINE__, -2.092036176589720e+24,	"-2.09204e+24", "%+g",
-__LINE__, -2.093546373938615e-21,	"-2.093546e-21", "%#e",
-__LINE__, -2.101302069316682e+18,	"-2.1013e+18", "%+7g",
-__LINE__, -2.103463622286002e-13,	"-2.103464E-13", "%E",
-__LINE__, -2.105622845016732e+06,	"-2105622.845017", "%1f",
-__LINE__, -2.109999123037767e+28,	"-2.11E+28", "%.2E",
-__LINE__, -2.110317013992166e+04,	"-21103.2", "%+g",
-__LINE__, -2.112226142154618e+21,	"-2112226142154617569702.", "%#6.f",
-__LINE__, -2.112519484486528e+06,	"-2.11252E+06", "%G",
-__LINE__, -2.113439260812000e+23,	"-2E+23", "%1.G",
-__LINE__, -2.113465893194608e-15,	"-2.1135E-15", "%.5G",
-__LINE__, -2.113547784669409e+20,	"-2.1135e+20", "%2.5g",
-__LINE__, -2.114146001321822e+28,	"-2.114146e+28", "%e",
-__LINE__, -2.114509425574444e-30,	"  -0", "%4.f",
-__LINE__, -2.114887421659561e-21,	"-0.000000", "%+f",
-__LINE__, -2.121120215127601e+21,	"-2121120215127601404958.5683097", "%.7f",
-__LINE__, -2.122555390665796e+06,	"-2E+06", "%0.G",
-__LINE__, -2.123468430242052e-27,	"-0.000000", "%+f",
-__LINE__, -2.123473598890635e+28,	"-2.12347e+28", "%+g",
-__LINE__, -2.124328049748190e-04,	"-2.124328E-04", "%E",
-__LINE__, -2.125633890999010e+28,	"-2E+28", "%+5.G",
-__LINE__, -2.125697963566045e+21,	"-2.1257E+21", "%0G",
-__LINE__, -2.127638109230109e+06,	"-2.12764e+06", "%+6g",
-__LINE__, -2.128456114617786e+07,	"-2.128456E+07", "%E",
-__LINE__, -2.128732742932824e-04,	"-2.128733E-04", "%#E",
-__LINE__, -2.129654381588404e+27,	"-2129654381588404365999167566.7697564", "%+.7f",
-__LINE__, -2.129792795009985e+20,	"-2.12979e+20", "%g",
-__LINE__, -2.131026925664619e-20,	"-2e-20", "%.0e",
-__LINE__, -2.132860730144188e-04,	"-0.0002", "%5.g",
-__LINE__, -2.133620979309562e+06,	"-2e+06", "%3.e",
-__LINE__, -2.133821423139120e-27,	"-2.13382E-27", "%.6G",
-__LINE__, -2.134253401425940e-07,	"-0.000000", "%f",
-__LINE__, -2.135469568156964e-29,	"-2.135470E-29", "%+7E",
-__LINE__, -2.135723595288365e-25,	"-0.0", "%.1f",
-__LINE__, -2.137642458920094e-09,	"-2.13764e-09", "%g",
-__LINE__, -2.143412361116583e+12,	"-2.14341e+12", "%+g",
-__LINE__, -2.144467087741129e-17,	"-2.14447e-17", "%+g",
-__LINE__, -2.145726966596964e-11,	"-0.000000", "%2f",
-__LINE__, -2.148318753042597e+08,	"-2.14832E+08", "%5G",
-__LINE__, -2.149932310549644e-19,	"-2.14993e-19", "%g",
-__LINE__, -2.150050917377646e-21,	" -0", "%3.f",
-__LINE__, -2.150854313643430e-16,	"-0.000000", "%.6f",
-__LINE__, -2.151071797121845e+00,	"-2.15107", "%+g",
-__LINE__, -2.158728406865981e+14,	"-215872840686598.088666", "%7f",
-__LINE__, -2.166062878011641e-23,	"-2.166063e-23", "%e",
-__LINE__, -2.167045002060684e+12,	"-2.167045E+12", "%E",
-__LINE__, -2.173752581051530e+20,	"-217375258105153035259.604621", "%f",
-__LINE__, -2.175599129057555e+24,	"-2.175599E+24", "%E",
-__LINE__, -2.176564454093042e-02,	"-0.0217656", "%+G",
-__LINE__, -2.181270774327071e-12,	"-0.000000", "%#1f",
-__LINE__, -2.184404769844158e-09,	"-2.2E-09", "%+.2G",
-__LINE__, -2.184881476334310e-07,	"-2.18488e-07", "%g",
-__LINE__, -2.189197211449684e-11,	"-2E-11", "%.0G",
-__LINE__, -2.189451286805190e+20,	"-218945128680519029984", "%3.f",
-__LINE__, -2.190642494146884e-27,	" -0.", "%#4.f",
-__LINE__, -2.194727956725854e+06,	"-2.19E+06", "%.3G",
-__LINE__, -2.196145868303877e+11,	"-219614586830.387726", "%+5f",
-__LINE__, -2.196397972262690e-16,	"-0.000000", "%3f",
-__LINE__, -2.202692843474668e-01,	"-2.203e-01", "%.3e",
-__LINE__, -2.204528684782451e-21,	"-2.20453E-21", "%G",
-__LINE__, -2.214926838821340e-16,	"-2e-16", "%+2.g",
-__LINE__, -2.215558986352773e+18,	"-2215558986352773374", "%0.f",
-__LINE__, -2.216976693056186e+27,	"-2216976693056186498154147557.215765", "%f",
-__LINE__, -2.217348422793322e+13,	"-2.21735E+13", "%6G",
-__LINE__, -2.217732695583920e-07,	"-0", "%.0f",
-__LINE__, -2.221185494767834e-14,	"-2.22119e-14", "%g",
-__LINE__, -2.224557193699609e-16,	"-2.224557E-16", "%E",
-__LINE__, -2.227417758704028e-18,	"-0.000000", "%0f",
-__LINE__, -2.231261655673006e-30,	"-2.231262E-30", "%E",
-__LINE__, -2.233081938836160e+21,	"-2233081938836160240668.960", "%+6.3f",
-__LINE__, -2.233158918439853e+05,	"-223316", "%2G",
-__LINE__, -2.233802298007898e-30,	"-2.2338E-30", "%2G",
-__LINE__, -2.233864858404732e+17,	"-223386485840473181.241350", "%f",
-__LINE__, -2.241242805107749e+14,	"-2.24124E+14", "%G",
-__LINE__, -2.244555498855249e+25,	"-2.24456E+25", "%#G",
-__LINE__, -2.248170665127481e-07,	"-2.248171E-07", "%E",
-__LINE__, -2.252558275567388e-13,	"-2.25256e-13", "%g",
-__LINE__, -2.256190083496001e+13,	"-22561900834960.0136398", "%7.7f",
-__LINE__, -2.259851596715945e+27,	"-2.259852e+27", "%e",
-__LINE__, -2.260461480001174e-21,	"-0.000000", "%f",
-__LINE__, -2.264128628428577e+22,	"-2.26413e+22", "%1g",
-__LINE__, -2.265914518399595e-04,	"-0.000226591", "%G",
-__LINE__, -2.266251557092826e+23,	"-2.26625e+23", "%g",
-__LINE__, -2.268592252572450e+19,	"-2.268592e+19", "%2.6e",
-__LINE__, -2.268597523847349e+11,	"-2.2686e+11", "%g",
-__LINE__, -2.268963106935546e+05,	"-226896", "%+g",
-__LINE__, -2.272527876808919e-24,	"-0.000000", "%#f",
-__LINE__, -2.273366440479073e+02,	"-227.337", "%g",
-__LINE__, -2.277858038556191e+25,	"-2.28E+25", "%0.3G",
-__LINE__, -2.282019915623415e+25,	"-2E+25", "%5.E",
-__LINE__, -2.283333247435650e-27,	"  -0", "%4.f",
-__LINE__, -2.285230610829355e+23,	"-2E+23", "%2.G",
-__LINE__, -2.290900253402985e+23,	"-2.2909E+23", "%G",
-__LINE__, -2.293266953268186e+08,	"-2.29327e+08", "%g",
-__LINE__, -2.293489603164786e+23,	"-229348960316478578391752.3076525", "%4.7f",
-__LINE__, -2.294434667605481e+15,	"-2.2944E+15", "%.5G",
-__LINE__, -2.296607768466765e+21,	"-2.29661E+21", "%G",
-__LINE__, -2.297449967994012e+14,	"-229744996799401.23542", "%+.5f",
-__LINE__, -2.301162556466583e-01,	"-0.230116", "%+#2g",
-__LINE__, -2.301676246374004e+05,	"-230168.", "%#g",
-__LINE__, -2.301976724487835e-01,	"-0.230198", "%5G",
-__LINE__, -2.303269770571222e-15,	"-2.303270e-15", "%.6e",
-__LINE__, -2.306451480495636e+23,	"-2.30645E+23", "%G",
-__LINE__, -2.307659351219690e-17,	"-0.000000", "%+3f",
-__LINE__, -2.309009762339430e+16,	"-2.30901E+16", "%G",
-__LINE__, -2.309261751862100e+06,	"-2309261.751862", "%+f",
-__LINE__, -2.309504876918634e-26,	" -2E-26", "%7.E",
-__LINE__, -2.310910348147804e-26,	"-2e-26", "%5.g",
-__LINE__, -2.317173552252235e+05,	"-231717.4", "%.7g",
-__LINE__, -2.319517289618469e-23,	"-2.31952E-23", "%+G",
-__LINE__, -2.320103195142527e+08,	"-2.320103E+08", "%+E",
-__LINE__, -2.323523032125633e+24,	"-2323523032125633491773442.07419", "%.5f",
-__LINE__, -2.326279126614399e-16,	"-0.000000", "%f",
-__LINE__, -2.331393688620925e-09,	"-2.33139e-09", "%#g",
-__LINE__, -2.334233527512469e+01,	"   -23", "%6.0f",
-__LINE__, -2.337418834112767e+24,	" -2E+24", "%7.E",
-__LINE__, -2.339455293612118e+12,	"-2339455293612.1", "%+.1f",
-__LINE__, -2.341930318143367e-18,	"-2.E-18", "%#4.E",
-__LINE__, -2.346107614950921e-17,	"-0.00000", "%+2.5f",
-__LINE__, -2.348356578807972e+23,	"-2.34836e+23", "%g",
-__LINE__, -2.351485855138244e+19,	"-2.351486e+19", "%+e",
-__LINE__, -2.362101647639198e-15,	"-2.36210e-15", "%#g",
-__LINE__, -2.369743873030115e+08,	"-2e+08", "%.1g",
-__LINE__, -2.371658164739356e+25,	"-23716581647393559784120498.079574", "%f",
-__LINE__, -2.372427847607163e+28,	"-2.37243E+28", "%G",
-__LINE__, -2.375465465294647e+11,	"-2.375465e+11", "%e",
-__LINE__, -2.377128971572195e-18,	"-0.0", "%1.1f",
-__LINE__, -2.380322448568089e-13,	"-2.38032E-13", "%+#0G",
-__LINE__, -2.385960728264882e+26,	"-2E+26", "%.0E",
-__LINE__, -2.387345744004747e+00,	"-2.38735", "%G",
-__LINE__, -2.390480023300201e+25,	"-2.39048e+25", "%g",
-__LINE__, -2.395420431930886e+23,	"-2E+23", "%2.E",
-__LINE__, -2.401144663870969e-10,	"-2.e-10", "%#6.g",
-__LINE__, -2.402787441215039e-08,	"-2.40279e-08", "%g",
-__LINE__, -2.402990830425278e+08,	"-2.40299E+08", "%G",
-__LINE__, -2.404213682932215e+08,	"-2.40421e+08", "%2g",
-__LINE__, -2.409385592298822e+21,	"-2409385592298821876511.283335", "%7f",
-__LINE__, -2.410798267658614e+13,	"-2.4108e+13", "%+g",
-__LINE__, -2.413180068271811e-24,	"-0.000000", "%+f",
-__LINE__, -2.413268457113495e+26,	"-2.41327E+26", "%3.6G",
-__LINE__, -2.415341832206007e-13,	"-0.000000", "%+f",
-__LINE__, -2.422519577068670e-08,	"-0.0000000", "%.7f",
-__LINE__, -2.422533651282808e+20,	"-2.42253E+20", "%#G",
-__LINE__, -2.422795006880671e+17,	"-2.4228e+17", "%g",
-__LINE__, -2.423483330202008e+20,	"-2.42348e+20", "%g",
-__LINE__, -2.431756009640369e-04,	"-0.000243176", "%+#3g",
-__LINE__, -2.431878622534173e-05,	"-0.000024", "%f",
-__LINE__, -2.432012113077180e+24,	"-2.43201e+24", "%g",
-__LINE__, -2.433843704470487e+07,	"-24338437", "%4.f",
-__LINE__, -2.435475755031956e+11,	"-2.435476E+11", "%1E",
-__LINE__, -2.438081888695437e-13,	"-0.000000", "%f",
-__LINE__, -2.438334590462860e+10,	"-2.4E+10", "%5.2G",
-__LINE__, -2.440223135334059e+17,	"-2.44022e+17", "%g",
-__LINE__, -2.444107281115317e-21,	"-2.44411e-21", "%+g",
-__LINE__, -2.444582273206171e-02,	"  -0.02", "%7.G",
-__LINE__, -2.445234676352794e+23,	"-2.44523e+23", "%#g",
-__LINE__, -2.449185020984714e+08,	"-2.E+08", "%#2.G",
-__LINE__, -2.450646640466020e+22,	"-2.45065E+22", "%5G",
-__LINE__, -2.456840850262473e+13,	"-24568408502625", "%0.f",
-__LINE__, -2.464466865714499e-10,	"-2e-10", "%6.g",
-__LINE__, -2.466022088999151e+27,	"-2.46602E+27", "%G",
-__LINE__, -2.484398113119779e-04,	"-2.484398E-04", "%E",
-__LINE__, -2.484591850456328e+23,	"-248459185045632846566832.085955", "%+f",
-__LINE__, -2.488166252162446e-11,	"-2.5E-11", "%4.2G",
-__LINE__, -2.493507313049390e+24,	"-2.49E+24", "%4.3G",
-__LINE__, -2.500280281988428e+28,	"-2.5E+28", "%.4G",
-__LINE__, -2.500373956445372e-07,	"-2.50037e-07", "%g",
-__LINE__, -2.505566434769299e-12,	"-2.5E-12", "%+#0.2G",
-__LINE__, -2.508215917020758e+05,	"-2.508216e+05", "%5e",
-__LINE__, -2.519368094680315e-29,	"-2.51937e-29", "%#0g",
-__LINE__, -2.522266530587753e-11,	"-2.52227e-11", "%+g",
-__LINE__, -2.534492886372514e-06,	"-2.53449E-06", "%0G",
-__LINE__, -2.534617610955074e-02,	"-0.03", "%0.2f",
-__LINE__, -2.540551642835634e+26,	"-3E+26", "%4.G",
-__LINE__, -2.548210731830516e-26,	"-0.000", "%2.3f",
-__LINE__, -2.558868082397931e-11,	"-3E-11", "%2.E",
-__LINE__, -2.560062512991052e+11,	"-2.56006E+11", "%+G",
-__LINE__, -2.561274682814428e-05,	"-0.000026", "%f",
-__LINE__, -2.563424949397357e-02,	"    -0", "%6.f",
-__LINE__, -2.577010939931465e+17,	"-2.57701E+17", "%G",
-__LINE__, -2.578224879294822e+10,	"-3E+10", "%+4.1G",
-__LINE__, -2.585655636750244e+13,	"-2.585656e+13", "%+0.7g",
-__LINE__, -2.585657986834408e+14,	"-2.5857e+14", "%3.5g",
-__LINE__, -2.586728929368101e+02,	"-258.673", "%+g",
-__LINE__, -2.591293023229468e+06,	"-2591293.0232295", "%2.7f",
-__LINE__, -2.592454222603538e-06,	"-2.59245E-06", "%G",
-__LINE__, -2.599399905869649e+02,	"-259.939991", "%f",
-__LINE__, -2.605382860307596e+12,	"-2.60538E+12", "%2G",
-__LINE__, -2.607507689402762e-01,	"-0.260751", "%#.6g",
-__LINE__, -2.612933252582967e+15,	"-2.61293e+15", "%g",
-__LINE__, -2.614337505491483e-14,	"-2.61434E-14", "%.6G",
-__LINE__, -2.618302263333671e+14,	"-2.62e+14", "%3.3g",
-__LINE__, -2.622998533972296e+00,	"-3.", "%#0.g",
-__LINE__, -2.623348319869643e-15,	"-2.62335E-15", "%#G",
-__LINE__, -2.626703132693163e+23,	"-3E+23", "%+6.E",
-__LINE__, -2.629610853765779e+25,	"-2.62961E+25", "%+#G",
-__LINE__, -2.632993880472784e+26,	"-2.63299E+26", "%G",
-__LINE__, -2.635651112327873e-20,	"-2.63565E-20", "%1G",
-__LINE__, -2.636003980473492e-23,	"-2.636E-23", "%G",
-__LINE__, -2.639316453244009e+10,	"-26393164532.440094", "%#f",
-__LINE__, -2.640517223417942e-28,	"-2.641e-28", "%.3e",
-__LINE__, -2.640625797147664e-22,	"-2.640626E-22", "%E",
-__LINE__, -2.644401262524378e-12,	" -0.000", "%7.3f",
-__LINE__, -2.651033203243637e-14,	"-2.651033e-14", "%+e",
-__LINE__, -2.652386470126594e-24,	"-2.652386E-24", "%E",
-__LINE__, -2.654281018623631e-12,	"-0.00000", "%6.5f",
-__LINE__, -2.655529742118827e+02,	"-265.552974", "%f",
-__LINE__, -2.658550833241620e+22,	"-26585508332416196708436.473273", "%+f",
-__LINE__, -2.660515890519100e+08,	"-2.660516E+08", "%E",
-__LINE__, -2.665025749266086e-24,	"-2.66503E-24", "%G",
-__LINE__, -2.666117105643095e-20,	"-2.66612e-20", "%g",
-__LINE__, -2.667051347741259e+11,	"-3e+11", "%6.g",
-__LINE__, -2.667207607243375e+04,	"-26672.076072", "%+#f",
-__LINE__, -2.667631877167590e+26,	"-2.667632E+26", "%E",
-__LINE__, -2.673817942962878e+13,	"-2.673818e+13", "%+2.6e",
-__LINE__, -2.674972907853507e+20,	"-2.674973E+20", "%E",
-__LINE__, -2.675830887404867e+14,	"-2.675831E+14", "%E",
-__LINE__, -2.682749918168908e+26,	"-2.682750E+26", "%E",
-__LINE__, -2.689222801942679e-03,	"-0.0027", "%7.2G",
-__LINE__, -2.692245629411156e+25,	"-2.69225e+25", "%g",
-__LINE__, -2.692606702464273e+11,	"-2.69261e+11", "%g",
-__LINE__, -2.693070822061136e-27,	"-2.69307e-27", "%+g",
-__LINE__, -2.694415515655336e-30,	"-3E-30", "%+3.0E",
-__LINE__, -2.694770057384739e+15,	"-2.69477e+15", "%g",
-__LINE__, -2.699998392329361e+01,	"-27", "%+.2g",
-__LINE__, -2.700151952281511e+23,	"-270015195228151050343968.", "%+#5.f",
-__LINE__, -2.707398527302841e-08,	"-2.70740e-08", "%+#3g",
-__LINE__, -2.711404950850030e-21,	"-2.71E-21", "%.2E",
-__LINE__, -2.714057739024281e-10,	"-2.714e-10", "%.4g",
-__LINE__, -2.717657632815414e-10,	"-2.71766e-10", "%g",
-__LINE__, -2.720875786430592e-09,	"-2.7E-09", "%6.2G",
-__LINE__, -2.725886730997891e+19,	"-2.72589e+19", "%g",
-__LINE__, -2.726089169748676e-09,	"-2.72609E-09", "%+G",
-__LINE__, -2.732907572038661e-30,	"-2.73291E-30", "%G",
-__LINE__, -2.737918050958789e+11,	"-3e+11", "%1.g",
-__LINE__, -2.739024251198484e-18,	"-2.73902e-18", "%+g",
-__LINE__, -2.742646144452305e+13,	"-2.74265e+13", "%g",
-__LINE__, -2.742911865386719e+06,	"-3E+06", "%+5.G",
-__LINE__, -2.759159275123811e-30,	"-0.000000", "%+f",
-__LINE__, -2.759794813930001e-21,	"-2.75979e-21", "%+g",
-__LINE__, -2.763243077558348e+20,	"-2.7632E+20", "%+0.4E",
-__LINE__, -2.770348477810209e-14,	"-0.000000", "%2f",
-__LINE__, -2.776074766292453e+05,	"-277607", "%g",
-__LINE__, -2.776610811432007e-07,	"-2.77661E-07", "%6G",
-__LINE__, -2.778673793270678e+23,	"-3E+23", "%+4.E",
-__LINE__, -2.782405168708350e+08,	"-278240516.87084", "%.5f",
-__LINE__, -2.783316149365198e-09,	"-3E-09", "%5.0G",
-__LINE__, -2.785436703085409e-27,	"-2.78544E-27", "%#G",
-__LINE__, -2.787479051660640e+21,	"-2.78748e+21", "%g",
-__LINE__, -2.789445406042450e-03,	"-0.002789", "%+f",
-__LINE__, -2.791104581836077e+05,	"-279110.4581836", "%+7.7f",
-__LINE__, -2.802078617775784e+04,	"-28020.786", "%0.3f",
-__LINE__, -2.804954315579055e+20,	"-2.80495E+20", "%G",
-__LINE__, -2.806575341862696e-05,	"-2.80658E-05", "%G",
-__LINE__, -2.807769556900402e-06,	"-0.000003", "%+#f",
-__LINE__, -2.808882056357941e-12,	"-0.0", "%.1f",
-__LINE__, -2.809386677339924e+10,	"-2.8094E+10", "%6.5G",
-__LINE__, -2.818404311437694e+19,	"-3E+19", "%6.G",
-__LINE__, -2.819463285551660e+01,	"-28.1946", "%+G",
-__LINE__, -2.821428853207724e-16,	"-3e-16", "%6.g",
-__LINE__, -2.824452750788444e+07,	"-3e+07", "%+2.g",
-__LINE__, -2.825430381094971e+28,	"-3e+28", "%+.0e",
-__LINE__, -2.830010928384944e-17,	"-0", "%.0f",
-__LINE__, -2.832505114479680e-09,	"-0.000000", "%f",
-__LINE__, -2.833246604950796e+13,	"-2.83325E+13", "%G",
-__LINE__, -2.833274073265017e+13,	"-28332740732650.174564", "%f",
-__LINE__, -2.835842581787797e+07,	"-2.83584E+07", "%2G",
-__LINE__, -2.839758384681983e-07,	"-2.83976E-07", "%.6G",
-__LINE__, -2.841077022753766e-09,	"-3E-09", "%0.1G",
-__LINE__, -2.845307294930682e+00,	"-2.845307e+00", "%+1e",
-__LINE__, -2.847420163874243e+19,	"-2.8e+19", "%1.2g",
-__LINE__, -2.848133715109881e-25,	"-2.848134E-25", "%E",
-__LINE__, -2.850208101288058e-06,	"-2.8502E-06", "%+5.4E",
-__LINE__, -2.853666525870413e+04,	"-28536.665259", "%f",
-__LINE__, -2.855661543202034e+21,	"-2.85566e+21", "%g",
-__LINE__, -2.859528889324159e-08,	"-2.859529e-08", "%3e",
-__LINE__, -2.860545310690251e+29,	"-3e+29", "%.1g",
-__LINE__, -2.863576633666884e-14,	"-2.863577e-14", "%+5e",
-__LINE__, -2.864115740396321e-14,	"-2.86412e-14", "%g",
-__LINE__, -2.864481979037153e+20,	"-2.86E+20", "%3.3G",
-__LINE__, -2.867582970177984e-18,	"-0.000000", "%f",
-__LINE__, -2.868237707901564e+25,	"-3E+25", "%6.E",
-__LINE__, -2.871741071402520e+13,	"-3e+13", "%.1g",
-__LINE__, -2.873724610073364e+18,	"-2873724610073364438.278531", "%+#f",
-__LINE__, -2.876433859770866e-25,	"-2.87643e-25", "%g",
-__LINE__, -2.877458587075737e-08,	"-2.877E-08", "%+.4G",
-__LINE__, -2.883349842927101e+24,	"-2.883350E+24", "%2E",
-__LINE__, -2.883749925642885e+09,	"-2.883750e+09", "%e",
-__LINE__, -2.883773835633003e-17,	"-0.000000", "%+f",
-__LINE__, -2.890389090491409e+24,	"-2890389090491409262995148.310438", "%#1f",
-__LINE__, -2.900848552225810e-11,	"-0.000000", "%+f",
-__LINE__, -2.911942123176400e+25,	"-29119421231764004431852300", "%0.f",
-__LINE__, -2.912904462180751e-18,	"-2.9129E-18", "%6G",
-__LINE__, -2.917717875075651e+26,	"-3e+26", "%0.e",
-__LINE__, -2.922293201084093e-26,	"-2.922293E-26", "%E",
-__LINE__, -2.925070319932451e-30,	"-0.000000", "%f",
-__LINE__, -2.926558572870874e+15,	"-2.926559E+15", "%E",
-__LINE__, -2.928781435877896e+26,	"-2.928781e+26", "%+e",
-__LINE__, -2.930178318110376e+28,	"-2.930178E+28", "%E",
-__LINE__, -2.930984661925819e+05,	"-293098.5", "%.7G",
-__LINE__, -2.932762424932762e-08,	"-0.000000", "%#f",
-__LINE__, -2.933415597492494e+10,	"-29334155974.924943", "%+#2f",
-__LINE__, -2.933564314850986e+29,	"-2.93356E+29", "%7G",
-__LINE__, -2.943224907893795e+10,	"-2.943225E+10", "%+7E",
-__LINE__, -2.945311540471221e+19,	"-2.94531E+19", "%#G",
-__LINE__, -2.945812356522847e+15,	"-2.94581e+15", "%+g",
-__LINE__, -2.945836999630957e+00,	"-2.945837E+00", "%E",
-__LINE__, -2.947798782726622e-01,	"-0.29478", "%+g",
-__LINE__, -2.948958405827917e+18,	"-2.94896e+18", "%g",
-__LINE__, -2.949790871798059e-11,	"-2.94979E-11", "%G",
-__LINE__, -2.950347806125225e-12,	"-2.95035e-12", "%g",
-__LINE__, -2.952781884599368e-29,	"-2.952782E-29", "%+E",
-__LINE__, -2.956801341442716e+06,	"-2.9568E+06", "%G",
-__LINE__, -2.957469310356540e-07,	"-0.000", "%1.3f",
-__LINE__, -2.960464869534870e-23,	"-2.96046E-23", "%G",
-__LINE__, -2.962339381825446e-07,	"-0", "%1.f",
-__LINE__, -2.971013180028710e+22,	"-2.971e+22", "%3.5g",
-__LINE__, -2.975167862441254e+07,	"-2.97517e+07", "%g",
-__LINE__, -2.976018424339993e+16,	"-2.976018e+16", "%3e",
-__LINE__, -2.979173094835454e+29,	"-2.97917E+29", "%G",
-__LINE__, -2.983135249987541e-03,	"-0.00298314", "%+G",
-__LINE__, -2.985142444917919e-24,	"-2.985142E-24", "%+#7E",
-__LINE__, -2.988680953635159e-14,	"-0.0000000", "%2.7f",
-__LINE__, -2.989629778079379e+04,	"-29896.297781", "%f",
-__LINE__, -2.991274275137276e+19,	"-29912742751372762839.423558", "%+4f",
-__LINE__, -2.991286396006024e-06,	"-2.99129e-06", "%4g",
-__LINE__, -2.993310397844811e+04,	"-2.993310E+04", "%3.6E",
-__LINE__, -2.994669852410861e-29,	"-2.99467E-29", "%G",
-__LINE__, -2.996082093034831e+27,	"-2.996082e+27", "%1e",
-__LINE__, -2.999783904575110e+16,	"-2.999784E+16", "%#E",
-__LINE__, -3.012019221956988e+25,	"-3.012019E+25", "%E",
-__LINE__, -3.014211917706622e-25,	"-0.000000", "%+f",
-__LINE__, -3.015149723683428e-19,	"-3.01515E-19", "%G",
-__LINE__, -3.022158478004638e-19,	"-3.02216e-19", "%6g",
-__LINE__, -3.022825518373900e-12,	"-3.0228E-12", "%+.4E",
-__LINE__, -3.025108924057340e-19,	"-0.000000", "%f",
-__LINE__, -3.026316824631967e+24,	"-3026316824631966717618070.106255", "%1f",
-__LINE__, -3.033074643529623e-13,	"-3.03307e-13", "%g",
-__LINE__, -3.035292960731141e+24,	"-3035292960731141409524980.190326", "%f",
-__LINE__, -3.043291272956732e-13,	"-3.04329e-13", "%#g",
-__LINE__, -3.045216723973715e-23,	"-3.045e-23", "%.4g",
-__LINE__, -3.047140976048835e+09,	"-3.04714E+09", "%3.5E",
-__LINE__, -3.047680278470886e+09,	"-3.047680E+09", "%#E",
-__LINE__, -3.048465807963461e+05,	"-304847", "%g",
-__LINE__, -3.050904753556756e+22,	"-3.0509E+22", "%G",
-__LINE__, -3.052845748999047e-13,	"-3.05285e-13", "%g",
-__LINE__, -3.053395231883620e-06,	"-3E-06", "%2.G",
-__LINE__, -3.054894203375445e-28,	"-3e-28", "%2.g",
-__LINE__, -3.055080347760755e-13,	"-0", "%2.f",
-__LINE__, -3.055513037393624e-29,	"-3e-29", "%3.g",
-__LINE__, -3.056198778208295e-06,	"-3.0562e-06", "%g",
-__LINE__, -3.057813660266980e-21,	"-3E-21", "%1.G",
-__LINE__, -3.059687036330998e-11,	"-3.1E-11", "%#2.2G",
-__LINE__, -3.061450385559094e-10,	"-3.06145E-10", "%G",
-__LINE__, -3.066605713361383e-27,	"-0.000000", "%f",
-__LINE__, -3.071590110813156e+22,	"-3.07159E+22", "%G",
-__LINE__, -3.073253864426931e+26,	"-3.0733E+26", "%.5G",
-__LINE__, -3.078998328596940e+07,	"-3.079e+07", "%5.4g",
-__LINE__, -3.082733887951920e+06,	"-3.082734e+06", "%+6e",
-__LINE__, -3.084365358064710e+24,	"-3.084365E+24", "%#E",
-__LINE__, -3.086948022123716e+25,	"-30869480221237162176350921.072299", "%+f",
-__LINE__, -3.088200214218024e-10,	"-0", "%0.f",
-__LINE__, -3.093442983942874e+08,	"-309344298.394287", "%f",
-__LINE__, -3.103573455403534e-09,	"-3.103573E-09", "%#E",
-__LINE__, -3.109178443120997e+07,	"-31091784.431210", "%f",
-__LINE__, -3.111494549914917e+28,	"-3e+28", "%0.g",
-__LINE__, -3.113384020517480e-17,	"    -0", "%+6.f",
-__LINE__, -3.121622779718055e+14,	"-312162277971805.491", "%+.3f",
-__LINE__, -3.122780443843900e-01,	"-0.312278", "%#g",
-__LINE__, -3.122952438335638e-25,	"-3.122952E-25", "%E",
-__LINE__, -3.128970339463168e-18,	"-3e-18", "%3.g",
-__LINE__, -3.130862507719335e+10,	"-3.130863e+10", "%3e",
-__LINE__, -3.145960838955379e+03,	"-3145.96", "%g",
-__LINE__, -3.149362645138929e+21,	"-3.14936e+21", "%g",
-__LINE__, -3.150697168664913e+26,	"-315069716866491322804222363.629378", "%+f",
-__LINE__, -3.157946785041287e+05,	"-3.1579e+05", "%.4e",
-__LINE__, -3.158347006986809e-02,	"-3.E-02", "%#.0E",
-__LINE__, -3.159542871923388e+07,	"-31595429", "%2.f",
-__LINE__, -3.169997512351985e+15,	"-3.169998E+15", "%6.7G",
-__LINE__, -3.170971776544746e+07,	"-31709717.765447", "%f",
-__LINE__, -3.173246079104466e+19,	"-3.173246E+19", "%1E",
-__LINE__, -3.173581228658553e-02,	"-0.03", "%+0.G",
-__LINE__, -3.187598864929850e-07,	"-3.18760E-07", "%#G",
-__LINE__, -3.190525302270244e+08,	"-3.190525e+08", "%+0.7g",
-__LINE__, -3.191879884186422e+19,	"-3.19E+19", "%.2E",
-__LINE__, -3.197292604744926e+02,	"-3.197293e+02", "%+e",
-__LINE__, -3.203713337688838e-12,	"-3.20371E-12", "%6G",
-__LINE__, -3.204416889544914e-18,	"-0.000000", "%+f",
-__LINE__, -3.204494471917096e+09,	"-3.20449e+09", "%g",
-__LINE__, -3.211933195516720e+11,	"-3.21193E+11", "%G",
-__LINE__, -3.214544021431917e-24,	"-0.000000", "%1f",
-__LINE__, -3.215501229487004e-07,	"-3e-07", "%3.e",
-__LINE__, -3.232157492322707e-13,	"-3.E-13", "%+#5.G",
-__LINE__, -3.239074974455177e-05,	"-3.239e-05", "%2.4g",
-__LINE__, -3.243083730801156e-24,	"-3.243084e-24", "%#e",
-__LINE__, -3.243128583394124e+07,	"-32431285.8339", "%6.4f",
-__LINE__, -3.247997999770571e-08,	"-3e-08", "%5.e",
-__LINE__, -3.258251054563991e-15,	"-3.2583E-15", "%.5G",
-__LINE__, -3.259499053187446e+07,	"-3.2595E+07", "%5.6G",
-__LINE__, -3.261907782031174e+20,	"-3.3e+20", "%.2g",
-__LINE__, -3.263979380855122e+29,	"-3.26398E+29", "%G",
-__LINE__, -3.264166546402073e+06,	"-3.26417E+06", "%5G",
-__LINE__, -3.269357648926951e+01,	"-3.E+01", "%#5.G",
-__LINE__, -3.273523287028019e-30,	"-3.27352e-30", "%g",
-__LINE__, -3.274464331526264e-14,	"-3e-14", "%.0g",
-__LINE__, -3.276647049958546e+05,	"-327664.7", "%+.1f",
-__LINE__, -3.276853612008326e-04,	"-3.276854e-04", "%e",
-__LINE__, -3.288077788905925e+17,	"-3.28808e+17", "%g",
-__LINE__, -3.292054327509010e+21,	"-3.29205e+21", "%+g",
-__LINE__, -3.292086868337041e-16,	"     -0", "%7.f",
-__LINE__, -3.299368070005327e-17,	"-3E-17", "%5.G",
-__LINE__, -3.307165537474566e-30,	"-3e-30", "%+2.g",
-__LINE__, -3.310556325973673e-17,	"-3.31056E-17", "%G",
-__LINE__, -3.315407318453138e-09,	"-3.315407e-09", "%+#.6e",
-__LINE__, -3.318402800998018e-09,	"-3.3184E-09", "%+G",
-__LINE__, -3.324277622889107e-04,	"-0.000332428", "%G",
-__LINE__, -3.326372457131185e+14,	"-3.326372e+14", "%0e",
-__LINE__, -3.333300611287597e+18,	"-3.3E+18", "%4.2G",
-__LINE__, -3.333608976277018e-25,	"-3.33361e-25", "%g",
-__LINE__, -3.333613056182724e-24,	"-3.33361e-24", "%.5e",
-__LINE__, -3.338505874378410e-26,	"-0.00000", "%.5f",
-__LINE__, -3.339838772519661e+24,	"-3.3398E+24", "%0.5G",
-__LINE__, -3.354802735583258e-27,	"-3.3548E-27", "%G",
-__LINE__, -3.356542080644329e+15,	"-3356542080644329.129058", "%#f",
-__LINE__, -3.360027692463026e-29,	"-3.36003e-29", "%+g",
-__LINE__, -3.361845657814323e+06,	"-3361845.657814", "%f",
-__LINE__, -3.363135493765816e-12,	"   -0", "%5.f",
-__LINE__, -3.367383112102258e+19,	"-33673831121022579360.158034", "%f",
-__LINE__, -3.376798505037497e+03,	"-3376.8", "%+3G",
-__LINE__, -3.388170639372559e+09,	"-3.388171e+09", "%+e",
-__LINE__, -3.397304185715499e-12,	"-3.397304e-12", "%+e",
-__LINE__, -3.401559374016378e-13,	"-3.40156e-13", "%g",
-__LINE__, -3.402651870178825e+21,	"-3.40265e+21", "%+g",
-__LINE__, -3.410491213537530e+12,	"-3.41049E+12", "%G",
-__LINE__, -3.411695570460075e-01,	"-3.411696e-01", "%e",
-__LINE__, -3.417311435719220e+29,	"-3.4E+29", "%3.1E",
-__LINE__, -3.417581063208165e-23,	"  -0", "%+4.f",
-__LINE__, -3.424005615113663e-28,	"-0.000000", "%f",
-__LINE__, -3.424793585094130e-12,	"-0.000000", "%f",
-__LINE__, -3.434733077762304e-05,	"-3.43473e-05", "%g",
-__LINE__, -3.436384988494743e+08,	"-3.43638E+08", "%G",
-__LINE__, -3.441082995163884e-21,	"-0.000000", "%f",
-__LINE__, -3.442868661576827e-23,	"-3.442869e-23", "%#.7g",
-__LINE__, -3.444337521046186e+13,	"-3.44434E+13", "%#G",
-__LINE__, -3.448230173418967e-28,	"-3.44823E-28", "%#G",
-__LINE__, -3.448523828225326e-21,	"-3.4485e-21", "%.4e",
-__LINE__, -3.449876796754720e-07,	"-3.44988e-07", "%g",
-__LINE__, -3.450163790411588e+25,	"-34501637904115876054333966.749255", "%2f",
-__LINE__, -3.450224454406567e-26,	"-3.450224E-26", "%#1E",
-__LINE__, -3.459930768422874e-28,	"-3.46E-28", "%2.3G",
-__LINE__, -3.460730505022601e-28,	"-3.46073e-28", "%#g",
-__LINE__, -3.462894265593946e-10,	"-3.46289e-10", "%+#g",
-__LINE__, -3.464808359229496e+05,	"-346481", "%6.6G",
-__LINE__, -3.467272303652620e-03,	"-0.00346727", "%g",
-__LINE__, -3.468252706910251e+10,	"-3.5E+10", "%#7.2G",
-__LINE__, -3.473623965680253e+27,	"-3.47362e+27", "%g",
-__LINE__, -3.474527926009729e+11,	"-3.475E+11", "%.4G",
-__LINE__, -3.476489048299929e+15,	"-3.47649e+15", "%g",
-__LINE__, -3.477809698895344e-09,	"-0.000", "%+.3f",
-__LINE__, -3.493008398637667e-28,	"  -0", "%+4.f",
-__LINE__, -3.497441286691613e+07,	"-3.49744e+07", "%g",
-__LINE__, -3.500904660533358e+00,	"-3.500905E+00", "%+1E",
-__LINE__, -3.504996054364915e+25,	"-3.505e+25", "%+g",
-__LINE__, -3.507738629125434e-24,	"-0.00", "%+4.2f",
-__LINE__, -3.508557770253211e-04,	"-3.508558e-04", "%#6e",
-__LINE__, -3.516056824437550e+20,	"-3.516057e+20", "%#e",
-__LINE__, -3.521102917733367e+02,	"-352.11", "%g",
-__LINE__, -3.523948985825251e+10,	"-3.52395e+10", "%+g",
-__LINE__, -3.525281835697895e-15,	"-3.525282e-15", "%e",
-__LINE__, -3.534088845494570e-26,	"-0.000000", "%2f",
-__LINE__, -3.541002442741569e+01,	"-35.410", "%3.3f",
-__LINE__, -3.541126630345017e-19,	"-3.541127e-19", "%e",
-__LINE__, -3.545277845967514e-17,	"-0.000000", "%f",
-__LINE__, -3.560935430637329e-12,	"-3.56094E-12", "%G",
-__LINE__, -3.564234584447659e-23,	"-3.56423E-23", "%G",
-__LINE__, -3.576040378379921e-11,	"-0.000000", "%+6f",
-__LINE__, -3.578133580350674e-05,	"-3.578134e-05", "%#e",
-__LINE__, -3.584484015191491e-28,	"-0.0", "%+2.1f",
-__LINE__, -3.591961845146752e+27,	"-3.59196E+27", "%G",
-__LINE__, -3.602508380305001e+26,	"-3.60251e+26", "%g",
-__LINE__, -3.603113449808132e+04,	"-36031.134498", "%+3.6f",
-__LINE__, -3.605569849504628e+25,	"-4E+25", "%6.G",
-__LINE__, -3.611297754851416e+05,	"-361129.775485", "%+f",
-__LINE__, -3.613177909959201e-28,	"-0.000000", "%f",
-__LINE__, -3.616261225230595e-01,	"-0.361626", "%3g",
-__LINE__, -3.619203521536307e+09,	"-3.6192E+09", "%G",
-__LINE__, -3.619316709131723e-27,	"-0.0000000", "%.7f",
-__LINE__, -3.623100583082346e+28,	"-3.6231E+28", "%+G",
-__LINE__, -3.626582653589919e+21,	"-3626582653589918603387.332041", "%f",
-__LINE__, -3.626667540343067e-30,	"-4.E-30", "%#.0G",
-__LINE__, -3.633539220625861e-30,	"-3.634E-30", "%+.3E",
-__LINE__, -3.641655782149502e-11,	"-3.64166E-11", "%G",
-__LINE__, -3.644523594046571e+25,	"-3.64452e+25", "%5g",
-__LINE__, -3.645977605394108e+25,	"-3.646e+25", "%+0.3e",
-__LINE__, -3.647864582248812e+13,	"-4E+13", "%4.G",
-__LINE__, -3.655241667633056e-25,	"-3.655242E-25", "%E",
-__LINE__, -3.662603655433297e+23,	"-3.662604e+23", "%e",
-__LINE__, -3.668995445134158e+22,	" -4E+22", "%7.G",
-__LINE__, -3.670006666569412e-11,	"-3.670007e-11", "%e",
-__LINE__, -3.670510381138509e-24,	"-3.670510e-24", "%e",
-__LINE__, -3.671283003268254e-20,	"-3.67128E-20", "%G",
-__LINE__, -3.687760201176777e-13,	"-3.68776E-13", "%G",
-__LINE__, -3.687983982100676e-14,	"-0.00", "%.2f",
-__LINE__, -3.694808382827435e-12,	"-3.694808E-12", "%#E",
-__LINE__, -3.696158520838821e+28,	"-3.69616E+28", "%3G",
-__LINE__, -3.700911860811323e+18,	"-3.70091e+18", "%+g",
-__LINE__, -3.701328314738669e+24,	"-3.70133e+24", "%g",
-__LINE__, -3.707068461822151e-19,	"-3.707068E-19", "%E",
-__LINE__, -3.710679411506914e+25,	"-3.71068e+25", "%g",
-__LINE__, -3.713003840923896e-23,	"-3.713e-23", "%7g",
-__LINE__, -3.717028397747828e-28,	"-3.71703e-28", "%g",
-__LINE__, -3.728159642236442e+14,	"-3.72816E+14", "%G",
-__LINE__, -3.731956233637010e+21,	"-3.73196E+21", "%G",
-__LINE__, -3.742336623322610e+07,	"-3.74234e+07", "%g",
-__LINE__, -3.748328269630045e+04,	"-37483.3", "%G",
-__LINE__, -3.750803081283569e-27,	"-3.7508E-27", "%+7G",
-__LINE__, -3.752021500826652e-04,	"-0.0004", "%.1G",
-__LINE__, -3.755942257004103e-12,	"-3.75594E-12", "%G",
-__LINE__, -3.765921235889045e+03,	" -4e+03", "%+7.g",
-__LINE__, -3.772453135667801e-28,	"-3.77245E-28", "%G",
-__LINE__, -3.776384200230367e+27,	"-3.776e+27", "%1.4g",
-__LINE__, -3.787035870684945e-25,	"-4E-25", "%+3.G",
-__LINE__, -3.798616350818839e-29,	"-3.7986164e-29", "%.7e",
-__LINE__, -3.807178315238428e-15,	"-0.000000", "%+#6f",
-__LINE__, -3.822059837967635e+18,	"-3822059837967634621.236357", "%6.6f",
-__LINE__, -3.823553096022006e+12,	"-3.82355e+12", "%g",
-__LINE__, -3.839198115259428e-23,	"-0.000000", "%f",
-__LINE__, -3.846953640321746e+02,	"-3.846954E+02", "%E",
-__LINE__, -3.852230696542361e+08,	"-3.8522e+08", "%#.5g",
-__LINE__, -3.861139362195314e-25,	"-3.86114E-25", "%2G",
-__LINE__, -3.873388618099769e+09,	"-3873388618", "%0.0f",
-__LINE__, -3.874161550543817e+15,	"-3.874162e+15", "%+e",
-__LINE__, -3.874527935469425e+20,	"-3.87E+20", "%3.3G",
-__LINE__, -3.878069577893697e-30,	"-3.878070E-30", "%#E",
-__LINE__, -3.878852490397702e-20,	"-3.87885e-20", "%g",
-__LINE__, -3.879688342272101e-10,	"-0.00", "%#4.2f",
-__LINE__, -3.879797428399897e+03,	"-3880", "%1.4g",
-__LINE__, -3.881588804766756e+00,	"-3.9", "%+4.2G",
-__LINE__, -3.889377318111182e+01,	"-38.8938", "%+.4f",
-__LINE__, -3.893444523430385e-03,	"-0.004", "%+2.g",
-__LINE__, -3.894912141515856e+03,	"-3894.91", "%+g",
-__LINE__, -3.905279115773667e+04,	"-39052.791158", "%f",
-__LINE__, -3.905333955484919e-20,	"-3.90533E-20", "%G",
-__LINE__, -3.906559442060730e+27,	"-3906559442060730447110472596.250474", "%f",
-__LINE__, -3.909396469655334e-26,	"-3.91E-26", "%.3G",
-__LINE__, -3.920132491092364e+11,	"-3.92013e+11", "%g",
-__LINE__, -3.935651497471973e+27,	"-3935651497471972604103029880", "%5.f",
-__LINE__, -3.939742577853889e-03,	"-0.004", "%5.G",
-__LINE__, -3.943284017088198e+19,	"-39432840170881981123.3", "%.1f",
-__LINE__, -3.947452186327660e+09,	"-3947452186.33", "%0.2f",
-__LINE__, -3.951967237553488e+18,	"-3951967237553488132.562052", "%f",
-__LINE__, -3.953673427359789e-28,	"-3.954E-28", "%3.4G",
-__LINE__, -3.956044867371602e+23,	"-4e+23", "%+6.1g",
-__LINE__, -3.965038994251913e-20,	"-3.96504e-20", "%g",
-__LINE__, -3.970527677577937e+05,	"-4.e+05", "%#0.1g",
-__LINE__, -3.970717822164395e-20,	"-3.970718e-20", "%6e",
-__LINE__, -3.978063834438912e-19,	"-3.97806E-19", "%G",
-__LINE__, -3.982705395472599e+27,	"-3.9827e+27", "%#.5g",
-__LINE__, -3.983486821352571e-28,	"-3.98349e-28", "%g",
-__LINE__, -3.985470630230926e-14,	"-4e-14", "%.2g",
-__LINE__, -3.993095662863953e-16,	"-3.993096e-16", "%e",
-__LINE__, -4.006984141314271e-22,	" -4e-22", "%7.2g",
-__LINE__, -4.006984141314271e-22,	"-4.0e-22", "%#7.2g",
-__LINE__, -4.013226099863981e+06,	"-4.013226E+06", "%+E",
-__LINE__, -4.013702226581167e+00,	"-4.0137022", "%+#3.7f",
-__LINE__, -4.017598274642537e+11,	"-4E+11", "%5.G",
-__LINE__, -4.021385792825529e-09,	" -4e-09", "%7.2g",
-__LINE__, -4.024099064819937e-20,	"-4.0241E-20", "%+G",
-__LINE__, -4.026952473441366e+22,	"-4.026952e+22", "%6.7g",
-__LINE__, -4.027636677087866e+12,	"-4.02764E+12", "%G",
-__LINE__, -4.036506013049443e+17,	"-4.03651e+17", "%0.6g",
-__LINE__, -4.063191953523012e-06,	"  -0.0", "%6.1f",
-__LINE__, -4.070953223475192e-23,	"-4.07095E-23", "%G",
-__LINE__, -4.072425833070524e+09,	"-4.072426E+09", "%E",
-__LINE__, -4.086025576759603e+12,	"-4.086026e+12", "%e",
-__LINE__, -4.086627783296081e-24,	"-4.087E-24", "%.3E",
-__LINE__, -4.086683676772144e+10,	"-40866836767.721439", "%f",
-__LINE__, -4.087336043219081e-10,	"-0.", "%+#0.f",
-__LINE__, -4.125162973336809e-26,	"-4.125163E-26", "%.7G",
-__LINE__, -4.150753797717075e-10,	"-4.2e-10", "%.2g",
-__LINE__, -4.152126152181912e+23,	"-4.15213e+23", "%g",
-__LINE__, -4.164458223079432e-07,	"-4.164458E-07", "%E",
-__LINE__, -4.170624866130099e+03,	"-4170.624866", "%4.6f",
-__LINE__, -4.171137277374942e-01,	" -4E-01", "%+7.E",
-__LINE__, -4.176067421901769e-25,	"-4.17607E-25", "%G",
-__LINE__, -4.179514418604771e+24,	"-4.1795e+24", "%3.5g",
-__LINE__, -4.196285183415621e+23,	"-4.19629E+23", "%5G",
-__LINE__, -4.198600486581023e+23,	"-4E+23", "%+4.G",
-__LINE__, -4.199020494598538e-16,	"-0.000000", "%+f",
-__LINE__, -4.207824153501688e-01,	"-0.420782", "%G",
-__LINE__, -4.219086441294006e-13,	"  -0", "%+4.f",
-__LINE__, -4.223689582765525e+12,	"-4.22369e+12", "%g",
-__LINE__, -4.230213377391093e+04,	"-42302.1", "%+2.6G",
-__LINE__, -4.232495358100605e-02,	"-0.042325", "%+f",
-__LINE__, -4.235459662515940e-29,	"-0.000000", "%f",
-__LINE__, -4.240807508057296e-07,	"-4e-07", "%0.g",
-__LINE__, -4.248376819122346e-13,	"-4.248377e-13", "%7e",
-__LINE__, -4.251361939638334e-23,	"-4.251362E-23", "%E",
-__LINE__, -4.253044333568077e+24,	"-4.253044e+24", "%4e",
-__LINE__, -4.255728039119772e-30,	"-4.25573E-30", "%2G",
-__LINE__, -4.256502531648988e+02,	"-425.65", "%G",
-__LINE__, -4.260731632612400e-04,	"-0", "%2.f",
-__LINE__, -4.262037138254753e-25,	"-4e-25", "%5.g",
-__LINE__, -4.270910126379393e+00,	"-4.2709", "%#7.4f",
-__LINE__, -4.273844276097008e-09,	" -0.", "%#4.f",
-__LINE__, -4.280424136111831e+21,	"-4.280E+21", "%.3E",
-__LINE__, -4.284351940366486e-23,	"-0.000000", "%+f",
-__LINE__, -4.291747881693517e-29,	"-4.3e-29", "%+#.2g",
-__LINE__, -4.298346825232928e+04,	"-42983.5", "%G",
-__LINE__, -4.298879924365432e+28,	"-42988799243654316484253286034.800112", "%f",
-__LINE__, -4.302192665689887e-25,	"-0.000000", "%f",
-__LINE__, -4.303899568112784e+06,	"-4E+06", "%1.G",
-__LINE__, -4.307399960278190e-30,	"-4.31e-30", "%.3g",
-__LINE__, -4.341161949359232e+01,	"-43.411619", "%+f",
-__LINE__, -4.353334435604675e+17,	" -4e+17", "%+7.g",
-__LINE__, -4.354760231068195e+08,	"-4e+08", "%2.e",
-__LINE__, -4.363535913318519e+08,	"-4.363536E+08", "%+7E",
-__LINE__, -4.365389605557404e-29,	"-4.365390e-29", "%e",
-__LINE__, -4.369278570829168e-22,	"-4.369279E-22", "%5E",
-__LINE__, -4.372187639240662e-11,	"-4.37219e-11", "%+g",
-__LINE__, -4.374221079233858e-15,	"-4.37422E-15", "%4.6G",
-__LINE__, -4.374840292001664e-13,	"-0.000000", "%+f",
-__LINE__, -4.376554800103945e+16,	"-43765548001039453.751559", "%f",
-__LINE__, -4.376659235899513e+07,	"-4.4E+07", "%0.2G",
-__LINE__, -4.377316129868239e-06,	"-4.37732E-06", "%+5G",
-__LINE__, -4.380028480226885e+21,	"-4e+21", "%1.0e",
-__LINE__, -4.380434965450223e+16,	"-43804349654502230.393405", "%f",
-__LINE__, -4.392477080355168e-15,	"-4E-15", "%+2.G",
-__LINE__, -4.396120020536161e+17,	"-439612002053616102.159594", "%#f",
-__LINE__, -4.400993154571784e+13,	"-44009931545717.844159", "%f",
-__LINE__, -4.402873692051930e-26,	"-4.4e-26", "%5.3g",
-__LINE__, -4.405330274903779e+24,	"-4405330274903779042006135.568954", "%+5f",
-__LINE__, -4.406272291312090e+06,	"-4.40627e+06", "%+g",
-__LINE__, -4.407065949816988e-13,	"-0.000000", "%f",
-__LINE__, -4.408295597674563e-10,	"-4.4083e-10", "%g",
-__LINE__, -4.417553815178214e-30,	"-4.41755E-30", "%G",
-__LINE__, -4.428894120469459e+16,	"-4.42889e+16", "%g",
-__LINE__, -4.433747825142046e+04,	"-4.433748e+04", "%#e",
-__LINE__, -4.435051082856639e+11,	"-4.43505E+11", "%G",
-__LINE__, -4.445045573007259e-27,	"-4.445e-27", "%.5g",
-__LINE__, -4.447791368960968e-25,	" -4e-25", "%+7.g",
-__LINE__, -4.449691386526521e-11,	"-4.44969e-11", "%g",
-__LINE__, -4.451399093849402e+06,	"-4.e+06", "%#0.e",
-__LINE__, -4.453753130320864e-22,	"-4E-22", "%6.E",
-__LINE__, -4.455910780463539e+00,	"-4", "%2.g",
-__LINE__, -4.464935674747308e+25,	"-4.46494e+25", "%g",
-__LINE__, -4.469759565657550e-29,	"-4.46976e-29", "%g",
-__LINE__, -4.473254139442931e+14,	"-4E+14", "%3.1G",
-__LINE__, -4.480844704930373e-04,	"-0.000448", "%5.6f",
-__LINE__, -4.484177356024563e+19,	"-4.484177E+19", "%E",
-__LINE__, -4.488115678357666e-13,	"-4.48812e-13", "%g",
-__LINE__, -4.491545112281561e+12,	"-4.491545E+12", "%E",
-__LINE__, -4.492547433553077e-23,	"-4.49255e-23", "%g",
-__LINE__, -4.492701755830813e-05,	"-0.000045", "%f",
-__LINE__, -4.497405935096372e-02,	"-4.497406e-02", "%e",
-__LINE__, -4.502764260212887e+21,	"-4.50276E+21", "%G",
-__LINE__, -4.511984199938207e+29,	"-451198419993820731832556703011.505306", "%f",
-__LINE__, -4.514517861504637e-13,	"-4.51452e-13", "%g",
-__LINE__, -4.525577218881990e+24,	"-4.5e+24", "%2.2g",
-__LINE__, -4.549244580903896e-26,	"-5E-26", "%2.G",
-__LINE__, -4.569192488002113e-29,	"-5E-29", "%3.G",
-__LINE__, -4.572011438847734e+17,	"-4.57e+17", "%#.3g",
-__LINE__, -4.573010973514519e-08,	"-4.57301e-08", "%+7g",
-__LINE__, -4.584534976177852e-04,	"-0.000458453", "%7g",
-__LINE__, -4.584729895132228e-21,	"-0.000000", "%4f",
-__LINE__, -4.585259328217483e-30,	"-4.58526E-30", "%+#4.6G",
-__LINE__, -4.589603063610410e-04,	"-4.589603E-04", "%+E",
-__LINE__, -4.592428795671033e+22,	" -5e+22", "%7.g",
-__LINE__, -4.595683678223830e-20,	"   -0", "%5.f",
-__LINE__, -4.602585606100101e+05,	"-4.602586E+05", "%E",
-__LINE__, -4.603375306660027e-08,	"-5E-08", "%+6.G",
-__LINE__, -4.611341343728034e-18,	"-4.611341e-18", "%5e",
-__LINE__, -4.613608487855863e+05,	"-461361", "%6g",
-__LINE__, -4.615997775774194e-24,	"-4.61600e-24", "%#g",
-__LINE__, -4.620310950564759e+23,	"-462031095056475926696749", "%1.0f",
-__LINE__, -4.620645693595563e-10,	"-4.6206457e-10", "%.7e",
-__LINE__, -4.621527706233292e-09,	"-4.621528e-09", "%#e",
-__LINE__, -4.625215210297273e-13,	"-4.62522E-13", "%G",
-__LINE__, -4.636755152220100e-29,	"-0.000000", "%#f",
-__LINE__, -4.641203877508087e+23,	"-4.6412e+23", "%0g",
-__LINE__, -4.648627249239175e+23,	"-4.65E+23", "%+0.3G",
-__LINE__, -4.662546890623409e-10,	"-4.663E-10", "%.3E",
-__LINE__, -4.664488650292317e-27,	"-4.66449e-27", "%#g",
-__LINE__, -4.668715685060282e+08,	"-466871568.50603", "%.5f",
-__LINE__, -4.673332851657081e-18,	"-4.7e-18", "%#5.2g",
-__LINE__, -4.683361436174074e+24,	"-4.68e+24", "%#.2e",
-__LINE__, -4.693748680461066e-01,	"-0.469375", "%G",
-__LINE__, -4.697110010549124e+23,	"-4.69711E+23", "%G",
-__LINE__, -4.710442739966989e+06,	"-4.710443e+06", "%2e",
-__LINE__, -4.713427678642280e-09,	"-4.71343e-09", "%g",
-__LINE__, -4.721999055940316e-04,	"-4.721999e-04", "%#1e",
-__LINE__, -4.724262200578540e+17,	"-472426220057853996.081576", "%+f",
-__LINE__, -4.733267644288093e+01,	"-4.733268e+01", "%7e",
-__LINE__, -4.742854711396110e-11,	"-0.000000", "%f",
-__LINE__, -4.757456106385936e+23,	"-4.75746e+23", "%g",
-__LINE__, -4.770895495642298e+27,	"-4770895495642298200777986494.358629", "%2f",
-__LINE__, -4.775073456318149e+29,	"-4.775073E+29", "%#E",
-__LINE__, -4.779997387204258e+17,	"-4.78e+17", "%g",
-__LINE__, -4.799264315770707e-23,	"-4.799264E-23", "%+.7G",
-__LINE__, -4.814277930599660e+10,	"-5e+10", "%2.1g",
-__LINE__, -4.818413387018612e+05,	"-5e+05", "%.0g",
-__LINE__, -4.818827195107612e-16,	"-4.818827e-16", "%e",
-__LINE__, -4.841524514024803e+21,	"-4.84152E+21", "%G",
-__LINE__, -4.860585077313477e+10,	"-4.86059E+10", "%+G",
-__LINE__, -4.870037451948589e+28,	"-48700374519485887248038125107.996166", "%f",
-__LINE__, -4.888835952705153e-28,	"-4.888836E-28", "%+E",
-__LINE__, -4.893523355754114e-19,	"-4.893523e-19", "%.6e",
-__LINE__, -4.906070260482585e+17,	"-490607026048258454", "%+.0f",
-__LINE__, -4.907734144101900e+25,	"-5E+25", "%+.1G",
-__LINE__, -4.917899547741841e-25,	"-4.917900e-25", "%e",
-__LINE__, -4.923348512538722e+25,	"-49233485125387215219916470.232420", "%+.6f",
-__LINE__, -4.926052630078460e-26,	"-4.926053e-26", "%e",
-__LINE__, -4.926751662051156e+14,	"-4.927E+14", "%+5.3E",
-__LINE__, -4.928017952199046e-12,	"-0.000000", "%f",
-__LINE__, -4.944296782981195e-21,	"-4.9443E-21", "%1.5G",
-__LINE__, -4.947320427183599e-19,	"-4.947320e-19", "%.6e",
-__LINE__, -4.968188938972135e+17,	"-4.96819E+17", "%G",
-__LINE__, -4.968756725758674e+05,	"-496876", "%G",
-__LINE__, -4.968788759793340e-26,	"-4.97E-26", "%.3G",
-__LINE__, -4.983904999913364e-24,	"-5E-24", "%0.G",
-__LINE__, -4.985209496522767e+23,	"-4.985209e+23", "%e",
-__LINE__, -4.987363880732866e+08,	"-4.98736E+08", "%G",
-__LINE__, -4.989754940144973e+05,	"-498975.494014", "%f",
-__LINE__, -4.998203870733718e-25,	"-4.9982e-25", "%g",
-__LINE__, -4.999153445016792e-27,	"-5e-27", "%+1.e",
-__LINE__, -5.002693488258108e+06,	" -5e+06", "%+7.g",
-__LINE__, -5.017958458603783e+05,	"-5.0179585E+05", "%+.7E",
-__LINE__, -5.028902178573363e-12,	"-5.0289e-12", "%0g",
-__LINE__, -5.032337536971444e+07,	"-50323375.369714", "%f",
-__LINE__, -5.036525516370473e-24,	"-5.0365e-24", "%4.5g",
-__LINE__, -5.038642321515756e+18,	"-5038642321515755639.893541", "%f",
-__LINE__, -5.051003516976770e-14,	"-5.051E-14", "%+G",
-__LINE__, -5.051196143816789e+27,	"-5.0512e+27", "%g",
-__LINE__, -5.057372886713786e+28,	"-5.057373e+28", "%#e",
-__LINE__, -5.057475029459727e+12,	"-5.05748e+12", "%+g",
-__LINE__, -5.068286816124670e-17,	"-5.068E-17", "%5.3E",
-__LINE__, -5.070475165759468e-12,	"-0.000000", "%4.6f",
-__LINE__, -5.081352543220476e+20,	"-5.081E+20", "%.3E",
-__LINE__, -5.084398319179363e+11,	"-508439831917.936313", "%#f",
-__LINE__, -5.085781220648484e+05,	"-5.E+05", "%+#7.G",
-__LINE__, -5.094941054632498e-24,	"-5.09494E-24", "%+G",
-__LINE__, -5.100059596310871e-10,	"-5.10006e-10", "%3.6g",
-__LINE__, -5.103072553594136e-01,	"-0.5", "%+1.g",
-__LINE__, -5.106319890388412e+08,	"-5.106320e+08", "%4e",
-__LINE__, -5.107120687977690e+09,	"-5107120687.977690", "%f",
-__LINE__, -5.119910716893161e-13,	"-5.11991E-13", "%6G",
-__LINE__, -5.127594569425709e-29,	"-5.12759e-29", "%#g",
-__LINE__, -5.130365585632797e+29,	"-5.13037e+29", "%#g",
-__LINE__, -5.131415638022112e+08,	"-513141563.802211", "%0f",
-__LINE__, -5.144703216335916e-23,	"-5.1447e-23", "%g",
-__LINE__, -5.152511923201882e-05,	"-5.15251E-05", "%+G",
-__LINE__, -5.165484448280190e-12,	" -0.0", "%5.1f",
-__LINE__, -5.179220760465737e-20,	"-5e-20", "%+5.g",
-__LINE__, -5.183005119662180e-10,	"-5.183005E-10", "%+E",
-__LINE__, -5.199587953258117e+13,	"-5.19959e+13", "%6g",
-__LINE__, -5.202041951844580e-25,	"-0.000000", "%f",
-__LINE__, -5.202836038621740e+00,	"-5.20284", "%G",
-__LINE__, -5.212204099528552e-11,	"-5.2122e-11", "%.6g",
-__LINE__, -5.225617726710534e+17,	"-522561772671053414.995868", "%+f",
-__LINE__, -5.230162003281426e+25,	"-52301620032814257754694153.84578", "%+6.5f",
-__LINE__, -5.251849429321286e-11,	"-5.25185e-11", "%g",
-__LINE__, -5.265174939930368e+23,	"-5.265175E+23", "%1.6E",
-__LINE__, -5.271218134351422e+21,	"-5.27122e+21", "%+1g",
-__LINE__, -5.273823357545750e+17,	"-527382335754575048.980541", "%f",
-__LINE__, -5.279848797214957e+11,	"-527984879721.495659", "%0f",
-__LINE__, -5.281551888625290e+11,	"-5e+11", "%4.g",
-__LINE__, -5.281780377142961e-24,	"-5.28178e-24", "%g",
-__LINE__, -5.292125782379512e+03,	"-5292.125782", "%f",
-__LINE__, -5.292401691410388e+15,	"-5292401691410387.520875", "%f",
-__LINE__, -5.305120752102265e-25,	"-5.30512e-25", "%+#.5e",
-__LINE__, -5.317975791704413e+16,	"-5.31798e+16", "%+g",
-__LINE__, -5.336522843607233e+27,	"-5.33652e+27", "%#6g",
-__LINE__, -5.342016438000917e-05,	" -5e-05", "%+7.e",
-__LINE__, -5.351122291549103e+06,	"-5351122.291549", "%+0f",
-__LINE__, -5.352043956303597e+00,	"-5.35204", "%g",
-__LINE__, -5.353582488767747e+09,	"-5.354E+09", "%7.3E",
-__LINE__, -5.383420177718380e+04,	"-5e+04", "%1.e",
-__LINE__, -5.384320189791882e-10,	"-5.384320e-10", "%e",
-__LINE__, -5.409487543257379e-12,	"-5.40949E-12", "%G",
-__LINE__, -5.418395794776773e+23,	"-5.4184e+23", "%g",
-__LINE__, -5.419918795921525e-09,	"-0.000000", "%+f",
-__LINE__, -5.422374157832442e+11,	"-5.42237e+11", "%3g",
-__LINE__, -5.426916951577001e-27,	"-5.42692E-27", "%+G",
-__LINE__, -5.430058833461779e+28,	"-5.43006E+28", "%G",
-__LINE__, -5.444433348653147e+23,	"-5.444433E+23", "%E",
-__LINE__, -5.446560186537024e+09,	"-5.446560E+09", "%E",
-__LINE__, -5.464243500152188e+27,	"-5.46424E+27", "%G",
-__LINE__, -5.464427517531742e+20,	"-546442751753174249529.365625", "%f",
-__LINE__, -5.465783705970954e+05,	"-5E+05", "%1.E",
-__LINE__, -5.475138077475789e-11,	"-5e-11", "%.0e",
-__LINE__, -5.475302250616576e+10,	"-54753022506.1658", "%.4f",
-__LINE__, -5.488964905442472e+09,	"-5.48896e+09", "%g",
-__LINE__, -5.492508526846316e-08,	"-5.49251e-08", "%.6g",
-__LINE__, -5.520533408804846e-15,	"-5.520533e-15", "%e",
-__LINE__, -5.532744688447266e+28,	"-55327446884472664123677532188.594341", "%2.6f",
-__LINE__, -5.535834653450131e-14,	"-5.5e-14", "%0.1e",
-__LINE__, -5.554344735392882e-02,	"-5.554345E-02", "%+#E",
-__LINE__, -5.555497334515501e-17,	"-5.5555e-17", "%g",
-__LINE__, -5.558304303221977e+14,	"-555830430322197.699411", "%f",
-__LINE__, -5.562210815777694e-05,	"-5.562211E-05", "%#1E",
-__LINE__, -5.564800722538402e-09,	"-5.56480e-09", "%#.6g",
-__LINE__, -5.567143271590439e-01,	"-5.567143e-01", "%#e",
-__LINE__, -5.568606044396186e+01,	"-55.6861", "%4g",
-__LINE__, -5.592027856401721e+12,	"-5.592028e+12", "%.7g",
-__LINE__, -5.592295342565443e+22,	"-6.E+22", "%#3.G",
-__LINE__, -5.600007421926053e+07,	"-56000074.219261", "%1f",
-__LINE__, -5.601444553155006e-12,	"-5.60144E-12", "%G",
-__LINE__, -5.605128912835080e-03,	"-0.005605", "%+f",
-__LINE__, -5.610950285679577e+19,	"-5.61095E+19", "%G",
-__LINE__, -5.622074657679467e+11,	"-562207465767.946690", "%f",
-__LINE__, -5.627358352391656e-01,	"-0.6", "%1.g",
-__LINE__, -5.627974317622488e-02,	"-5.627974e-02", "%+e",
-__LINE__, -5.629497696447229e+27,	"-5.629E+27", "%+.4G",
-__LINE__, -5.631383567258576e-29,	"-5.63138e-29", "%0g",
-__LINE__, -5.635241327177333e-18,	"-5.63524E-18", "%G",
-__LINE__, -5.644819783138381e+06,	"-5.644820E+06", "%#E",
-__LINE__, -5.648538459114833e+26,	"-564853845911483265496144667.849876", "%+f",
-__LINE__, -5.649004865848537e+00,	"-5.649", "%g",
-__LINE__, -5.653403316885170e+23,	"-6E+23", "%2.0E",
-__LINE__, -5.656109962244926e-18,	"-0.000000", "%f",
-__LINE__, -5.674988031695793e+22,	"-5.674988E+22", "%+.7G",
-__LINE__, -5.686380226400881e-22,	"-0.000000", "%f",
-__LINE__, -5.698840855829442e-14,	"-5.69884E-14", "%G",
-__LINE__, -5.707036642649580e+03,	"-5707.036643", "%f",
-__LINE__, -5.710344882278847e+11,	"-5.71034E+11", "%+G",
-__LINE__, -5.714852196401017e+19,	"-5.71485E+19", "%+G",
-__LINE__, -5.720153622156089e-22,	"-5.72015E-22", "%G",
-__LINE__, -5.722366011976922e+26,	"-5.72237e+26", "%+g",
-__LINE__, -5.722909928097404e+12,	"-5.72291E+12", "%2G",
-__LINE__, -5.725325961787777e-25,	"-5.72533e-25", "%g",
-__LINE__, -5.727138241052646e+19,	"-5.72714e+19", "%+#g",
-__LINE__, -5.734025840446336e+14,	"-5.73403e+14", "%+g",
-__LINE__, -5.736469106710259e-05,	"-0.000057", "%.6f",
-__LINE__, -5.755099153733116e-14,	"-5.7551e-14", "%+g",
-__LINE__, -5.758411844890947e-20,	"-6E-20", "%+6.G",
-__LINE__, -5.760350214122813e+03,	"-5760.35", "%+g",
-__LINE__, -5.768009192512392e-30,	"-0", "%1.f",
-__LINE__, -5.772343286693103e+07,	"-5.77234E+07", "%G",
-__LINE__, -5.776693265471852e-27,	"-5.776693E-27", "%E",
-__LINE__, -5.779682861172754e-28,	"-5.779683e-28", "%e",
-__LINE__, -5.789953490749936e+26,	"-578995349074993637117358957.76656", "%5.5f",
-__LINE__, -5.796771264754334e+04,	"-57967.7", "%g",
-__LINE__, -5.804788370597286e-02,	"-5.80479E-02", "%+#1.5E",
-__LINE__, -5.805343475329215e-13,	"-5.80534e-13", "%g",
-__LINE__, -5.809853913830122e+09,	"-5809853914", "%+0.f",
-__LINE__, -5.817313814570609e-30,	"     -0", "%7.0f",
-__LINE__, -5.831708441750138e+00,	"-5.83171", "%#g",
-__LINE__, -5.846914550593652e+29,	"-5.846915e+29", "%e",
-__LINE__, -5.851455214762288e+04,	"-58514.6", "%+G",
-__LINE__, -5.855803663871393e-23,	"-6E-23", "%5.E",
-__LINE__, -5.858065129988470e+10,	"-5.85807e+10", "%+g",
-__LINE__, -5.863147168075411e-14,	"-5.86315e-14", "%+g",
-__LINE__, -5.878936740266680e-04,	"-0.000587894", "%g",
-__LINE__, -5.887654893386630e+25,	"-58876548933866299506689756.526612", "%#f",
-__LINE__, -5.889416409731902e-02,	"-0.06", "%5.g",
-__LINE__, -5.897630195029892e-18,	"-5.897630E-18", "%#0.7G",
-__LINE__, -5.898506808456422e-19,	"-5.89851E-19", "%G",
-__LINE__, -5.901768645393515e+29,	"-5.90177E+29", "%+G",
-__LINE__, -5.907529093570369e+10,	"-59075290935.703695", "%f",
-__LINE__, -5.910069365260240e+13,	"-59100693652602.39849", "%+#5.5f",
-__LINE__, -5.915678929676435e-07,	"-0.000001", "%+f",
-__LINE__, -5.922232380131716e-01,	"-0.592223", "%+3f",
-__LINE__, -5.923716473994306e+19,	"-5.92372E+19", "%+#.6G",
-__LINE__, -5.929950428920404e-15,	"-5.929950e-15", "%+e",
-__LINE__, -5.949552735665802e+26,	"-5.94955e+26", "%#g",
-__LINE__, -5.949977081310732e-02,	"-0.059500", "%f",
-__LINE__, -5.954520303889356e-07,	"-5.954520E-07", "%5E",
-__LINE__, -5.978861337429145e-13,	"-6E-13", "%1.G",
-__LINE__, -5.980539445081087e+15,	"-5.98054E+15", "%.6G",
-__LINE__, -5.981724990853490e-03,	" -0.006", "%#7.g",
-__LINE__, -5.989488907825821e+03,	"-6E+03", "%.2G",
-__LINE__, -5.998272294890842e+06,	"-6.00E+06", "%4.2E",
-__LINE__, -6.023775731455919e-29,	"-6.023776e-29", "%e",
-__LINE__, -6.028153126666870e-05,	"-6.e-05", "%+#6.e",
-__LINE__, -6.036200621484690e+25,	"-6e+25", "%2.2g",
-__LINE__, -6.036400640928137e-14,	"-6.036401e-14", "%e",
-__LINE__, -6.038198451098329e-20,	"-6.038198e-20", "%1.7g",
-__LINE__, -6.045778975641123e-15,	"-6.04578E-15", "%G",
-__LINE__, -6.046038904252073e+00,	"-6.04604", "%g",
-__LINE__, -6.082158462782175e-06,	"-0.000006", "%+#f",
-__LINE__, -6.106162726644904e+10,	"-6.10616e+10", "%g",
-__LINE__, -6.126345215489182e+10,	"-6e+10", "%+1.g",
-__LINE__, -6.131852309620571e+02,	"-6e+02", "%4.e",
-__LINE__, -6.134589313243809e-01,	"-0.613459", "%+#f",
-__LINE__, -6.142358153783462e-10,	"-6.14236E-10", "%4G",
-__LINE__, -6.151524334856263e+27,	"-6151524334856262932191839354.345575", "%+6f",
-__LINE__, -6.156818333724550e+04,	"-6.e+04", "%#.1g",
-__LINE__, -6.166172551433993e+24,	"-6166172551433993120895138.4178", "%5.4f",
-__LINE__, -6.169532428006014e-09,	"-6.16953e-09", "%3g",
-__LINE__, -6.172019382601770e-28,	"-0.000000", "%+f",
-__LINE__, -6.174496985807155e-09,	"-6.1745E-09", "%G",
-__LINE__, -6.186771845105751e+04,	"-61867.7", "%G",
-__LINE__, -6.200817973780066e+22,	"-6.20082E+22", "%3G",
-__LINE__, -6.218004335456301e-22,	"-0.000000", "%+f",
-__LINE__, -6.219009630546262e-18,	"-6.22e-18", "%6.3g",
-__LINE__, -6.242532875230618e-06,	"-0.000006", "%7f",
-__LINE__, -6.243612261280864e+14,	"-6.24361e+14", "%.6g",
-__LINE__, -6.243689597320126e+10,	"-6e+10", "%.0e",
-__LINE__, -6.244620667090527e+04,	"-6e+04", "%6.e",
-__LINE__, -6.250789625572054e-09,	"-0.000000", "%+f",
-__LINE__, -6.253537566219164e+01,	"-63.", "%#1.f",
-__LINE__, -6.284420289484166e+21,	"-6.2844203e+21", "%7.7e",
-__LINE__, -6.285939888202846e+27,	"-6e+27", "%+.0g",
-__LINE__, -6.290025777678105e+13,	"-6E+13", "%2.E",
-__LINE__, -6.291364254323924e+10,	"-6.3E+10", "%3.2G",
-__LINE__, -6.292428812164449e+15,	"-6292428812164448.714839", "%.6f",
-__LINE__, -6.292600606358002e+29,	"-6.29260E+29", "%#G",
-__LINE__, -6.292739629144148e-15,	"-6.292740E-15", "%E",
-__LINE__, -6.296471626465745e+28,	"-6.29647E+28", "%G",
-__LINE__, -6.299575066640315e+27,	"-6.300E+27", "%.3E",
-__LINE__, -6.315234679394876e-24,	"-6E-24", "%2.G",
-__LINE__, -6.320883246383228e-01,	"-0.632088", "%2g",
-__LINE__, -6.324938413548937e-11,	"-6e-11", "%.1g",
-__LINE__, -6.336312983176250e+04,	"-6.336313e+04", "%e",
-__LINE__, -6.341786787214541e+06,	"-6.341787E+06", "%+7.6E",
-__LINE__, -6.360189291106185e-15,	"-0.0000000", "%#.7f",
-__LINE__, -6.364818355457748e-15,	"-0.0000000", "%1.7f",
-__LINE__, -6.366291103431814e+04,	"-63662.9", "%#G",
-__LINE__, -6.366334042923153e-05,	"-6.37e-05", "%5.3g",
-__LINE__, -6.370477455143194e-12,	"-0.000000", "%f",
-__LINE__, -6.372829256546279e+23,	"-6.37283E+23", "%G",
-__LINE__, -6.375208490193110e-23,	"-6.37521e-23", "%4.5e",
-__LINE__, -6.382595100891736e-24,	"-6.3826E-24", "%5G",
-__LINE__, -6.396882421146790e-22,	"-6.39688e-22", "%+g",
-__LINE__, -6.407190354039938e+08,	"-6.40719e+08", "%+g",
-__LINE__, -6.408581541430886e-10,	"-6.E-10", "%#0.0G",
-__LINE__, -6.409206904981703e-03,	"-0.006", "%+.0G",
-__LINE__, -6.416106714707772e+26,	"-641610671470777216285341637.558304", "%f",
-__LINE__, -6.417436981761998e-04,	"-0.000642", "%+#f",
-__LINE__, -6.429997249673124e+11,	"-642999724967.312414", "%#f",
-__LINE__, -6.440827429825250e+16,	"-6.44083E+16", "%G",
-__LINE__, -6.444869858444955e+02,	"-6e+02", "%6.g",
-__LINE__, -6.471701890976228e-25,	" -6e-25", "%7.1g",
-__LINE__, -6.485393161670371e-12,	"-6.485393e-12", "%.6e",
-__LINE__, -6.487710907063584e+23,	"-6.E+23", "%#3.E",
-__LINE__, -6.492942931343439e-08,	"-0.", "%+#2.0f",
-__LINE__, -6.496010652113223e+18,	"-6.49601e+18", "%g",
-__LINE__, -6.502856921840228e+22,	"-6.50286e+22", "%4g",
-__LINE__, -6.523559906055000e-10,	"-6.52356E-10", "%.6G",
-__LINE__, -6.525899074126662e+04,	"-6.5e+04", "%+.1e",
-__LINE__, -6.532216801155521e-09,	"-6.53222E-09", "%G",
-__LINE__, -6.544601787025684e-27,	"-0", "%+.0f",
-__LINE__, -6.558968312132168e-01,	"    -1", "%+6.f",
-__LINE__, -6.559654261655786e+08,	"-6.559654e+08", "%e",
-__LINE__, -6.566562622196495e-21,	"-6.56656E-21", "%.6G",
-__LINE__, -6.573486832071960e+04,	"-65734.9", "%G",
-__LINE__, -6.573806290918275e+13,	"-6.57381E+13", "%G",
-__LINE__, -6.578113771674787e+17,	"-6.57811E+17", "%+#G",
-__LINE__, -6.584106931007506e+15,	"-6.584107E+15", "%E",
-__LINE__, -6.590538844308877e+07,	"-65905388.443089", "%f",
-__LINE__, -6.593708834068371e-07,	"-0.000001", "%f",
-__LINE__, -6.597116446195875e+08,	"-6.5971164e+08", "%#1.7e",
-__LINE__, -6.605813542127091e-04,	"-0.0007", "%+0.g",
-__LINE__, -6.607491403866429e+07,	"-7e+07", "%3.g",
-__LINE__, -6.616499847522278e+09,	"-6.61650E+09", "%+#G",
-__LINE__, -6.618619768691332e+20,	"-7E+20", "%2.G",
-__LINE__, -6.626748168962331e-22,	"-7.E-22", "%+#3.E",
-__LINE__, -6.639335450348280e+12,	"-6.63934e+12", "%g",
-__LINE__, -6.643910144912576e-03,	"-0.006644", "%f",
-__LINE__, -6.650293872031870e-18,	"-6.65029e-18", "%+#g",
-__LINE__, -6.654903858656310e-21,	"-0.000000", "%f",
-__LINE__, -6.665834666726511e-12,	"-6.665835E-12", "%E",
-__LINE__, -6.666428729917570e-19,	"-0.000000", "%+#f",
-__LINE__, -6.668415789681128e+27,	"-6.66842E+27", "%+G",
-__LINE__, -6.675214676269601e-28,	"-6.67521e-28", "%#g",
-__LINE__, -6.679560072732262e+01,	"-66.7956", "%#g",
-__LINE__, -6.692325075457020e-19,	"-0.000000", "%1f",
-__LINE__, -6.697096655164652e+00,	"-6.70", "%#.3g",
-__LINE__, -6.712436135928394e-28,	"-7e-28", "%0.g",
-__LINE__, -6.720769486122685e-16,	"-7e-16", "%0.e",
-__LINE__, -6.727196898490600e+26,	"-672719689849060031860972230.8", "%.1f",
-__LINE__, -6.744132627576416e+02,	"-674.413", "%6G",
-__LINE__, -6.757705576425288e+28,	"-6.7577056e+28", "%.7e",
-__LINE__, -6.760554929237173e-02,	"-0.067606", "%+f",
-__LINE__, -6.763538810629361e+10,	"-6.7635E+10", "%.4E",
-__LINE__, -6.764712008860796e-29,	"-6.76471E-29", "%+G",
-__LINE__, -6.767299719678443e+04,	"-67672.997197", "%f",
-__LINE__, -6.768326491352134e+20,	"-676832649135213415547.70", "%+.2f",
-__LINE__, -6.771116968952891e+03,	"-7E+03", "%3.1G",
-__LINE__, -6.775218099238350e-30,	"-7.e-30", "%+#6.g",
-__LINE__, -6.782142689928918e-18,	"-0.00", "%4.2f",
-__LINE__, -6.795409770512149e+08,	"-7E+08", "%+5.0G",
-__LINE__, -6.820966157097271e+14,	"-6.820966e+14", "%e",
-__LINE__, -6.824972990592273e-22,	"-0.00", "%+#1.2f",
-__LINE__, -6.830452914741750e+29,	"-6.8E+29", "%+7.2G",
-__LINE__, -6.835797187132348e+10,	"-6.8358E+10", "%+5G",
-__LINE__, -6.837040829636343e-03,	"-0.00683704", "%+g",
-__LINE__, -6.852956218658224e+23,	"-6.85296e+23", "%3g",
-__LINE__, -6.854102607287217e-26,	"-7e-26", "%5.e",
-__LINE__, -6.865065870249438e+16,	"-6.86507E+16", "%#G",
-__LINE__, -6.884819522625523e-13,	"-6.88482E-13", "%5G",
-__LINE__, -6.916316600148513e-12,	"-0.000000", "%f",
-__LINE__, -6.925312418761560e-05,	"-6.92531E-05", "%#G",
-__LINE__, -6.929518694178331e+09,	"-6929518694.178", "%#.3f",
-__LINE__, -6.936008056682024e+02,	"-6.936008E+02", "%E",
-__LINE__, -6.944911117352400e+26,	"-6.944911E+26", "%1.6E",
-__LINE__, -6.945829492125162e+05,	"-6.9e+05", "%+2.2g",
-__LINE__, -6.946603162471856e-13,	"-6.94660E-13", "%#G",
-__LINE__, -6.947529440406653e+22,	"-6.9475e+22", "%+6.5g",
-__LINE__, -6.950167604854856e-30,	"-0.000000", "%7f",
-__LINE__, -6.958122319262799e-26,	"-7E-26", "%+1.E",
-__LINE__, -6.958978258390961e+16,	"-6.95898E+16", "%+5.6G",
-__LINE__, -6.963780466334008e-06,	"-6.96378E-06", "%2G",
-__LINE__, -6.965570896221966e+13,	"-6.965571E+13", "%5E",
-__LINE__, -6.967741871945064e-10,	"-6.96774E-10", "%+#G",
-__LINE__, -6.973815739524307e+19,	"-69738157395243067782.076", "%6.3f",
-__LINE__, -6.982714545008106e+13,	"-6.98271e+13", "%g",
-__LINE__, -6.985955885054476e+03,	"-6985.96", "%6G",
-__LINE__, -6.986415266835747e+18,	"-6.98642e+18", "%#g",
-__LINE__, -6.996461529596512e-08,	"-7.0E-08", "%#.1E",
-__LINE__, -7.000144914012241e-05,	"-7.00014e-05", "%#g",
-__LINE__, -7.001017894492730e-03,	"-0.00700102", "%+#.6G",
-__LINE__, -7.003690685875917e+20,	"-7E+20", "%0.G",
-__LINE__, -7.010454163965384e+00,	"-7.010454e+00", "%+e",
-__LINE__, -7.011493550018082e-26,	"     -0", "%7.f",
-__LINE__, -7.018018443394008e+21,	"-7.0E+21", "%+#1.1E",
-__LINE__, -7.027253777387243e-05,	"-7.02725E-05", "%+G",
-__LINE__, -7.043679213677740e-17,	"-0", "%1.f",
-__LINE__, -7.051690489227881e-16,	"-7.052e-16", "%0.4g",
-__LINE__, -7.063422475274161e-16,	"-7.063422E-16", "%E",
-__LINE__, -7.065069592235558e-30,	"-7.06507e-30", "%+#g",
-__LINE__, -7.068265283935834e-29,	"-7e-29", "%+5.e",
-__LINE__, -7.068748224536295e-13,	"-0.000000", "%f",
-__LINE__, -7.069621910708177e-04,	"-0.000707", "%1.3g",
-__LINE__, -7.079725450964823e-12,	"-0.000000", "%f",
-__LINE__, -7.087255464668218e+17,	"-7.1e+17", "%.1e",
-__LINE__, -7.088715102009605e-09,	"-7e-09", "%6.0g",
-__LINE__, -7.090414916270137e-15,	"-0.00000", "%.5f",
-__LINE__, -7.091868311008428e-03,	" -0.0", "%5.1f",
-__LINE__, -7.094242165237718e+21,	"-7.09424e+21", "%+g",
-__LINE__, -7.094324305740325e-05,	"-7E-05", "%+3.G",
-__LINE__, -7.104544752289144e+04,	"-71045.4", "%#g",
-__LINE__, -7.105164644813694e-29,	"-0.000000", "%+f",
-__LINE__, -7.114513164219487e-12,	"-7.11451e-12", "%+g",
-__LINE__, -7.115778236604137e-12,	"-7.11578E-12", "%G",
-__LINE__, -7.126217683410162e-27,	"-7.126218e-27", "%e",
-__LINE__, -7.136214260967733e+28,	"-71362142609677334803564008325.338364", "%f",
-__LINE__, -7.143452595522573e+19,	"-7.14345e+19", "%g",
-__LINE__, -7.156042088843537e+27,	"-7156042088843537207765166385.7977837", "%4.7f",
-__LINE__, -7.173687683710490e+24,	"-7.17369e+24", "%6g",
-__LINE__, -7.190531162598206e+25,	"-71905311625982060164119503", "%4.f",
-__LINE__, -7.201301831373747e-09,	"-7.2013e-09", "%g",
-__LINE__, -7.209601436737306e+10,	"-7.2096e+10", "%g",
-__LINE__, -7.211058997356655e-06,	"-7.211059E-06", "%E",
-__LINE__, -7.226756177676272e-09,	"-7.22676E-09", "%+G",
-__LINE__, -7.230870817566419e+19,	"-72308708175664193618.1040364", "%#.7f",
-__LINE__, -7.231355992133345e-05,	"-7.231356E-05", "%#E",
-__LINE__, -7.245999575278407e-12,	"-7.246e-12", "%g",
-__LINE__, -7.247426403040390e-09,	"-7.2474E-09", "%+4.5G",
-__LINE__, -7.257348680308567e-12,	"-7.3E-12", "%1.2G",
-__LINE__, -7.258184256387366e-26,	"-7.25818E-26", "%+2G",
-__LINE__, -7.262633672900126e+10,	"-7.26263e+10", "%#g",
-__LINE__, -7.268887462426250e+03,	"-7.268887e+03", "%+#e",
-__LINE__, -7.275284494682963e+08,	"-7.27528e+08", "%g",
-__LINE__, -7.276335846256479e-07,	"  -0", "%4.f",
-__LINE__, -7.312556378294452e+15,	"-7.31256e+15", "%+6g",
-__LINE__, -7.334763752442417e-15,	"-0.0000", "%#.4f",
-__LINE__, -7.354627097325888e-18,	"-7E-18", "%0.E",
-__LINE__, -7.360087573342401e-25,	"-7.4E-25", "%6.2G",
-__LINE__, -7.368533563361098e-29,	"-7.4E-29", "%3.1E",
-__LINE__, -7.379267723540596e-06,	"-0.000007", "%f",
-__LINE__, -7.384525781709565e-19,	"-0.000000", "%+#f",
-__LINE__, -7.388940868679677e-09,	"-7.388941E-09", "%E",
-__LINE__, -7.391602149099698e+00,	"-7.391602E+00", "%E",
-__LINE__, -7.393159340196723e+22,	"-7.39316e+22", "%#2.6g",
-__LINE__, -7.399783260198277e-16,	"-7.39978E-16", "%G",
-__LINE__, -7.405609590448331e-06,	"-7.40561e-06", "%g",
-__LINE__, -7.407396977847794e-11,	"-7.40740E-11", "%#G",
-__LINE__, -7.433716848698637e+20,	"-7.43372e+20", "%+g",
-__LINE__, -7.444176062769411e-01,	"-0.744418", "%#g",
-__LINE__, -7.448314697244012e+12,	"-7448314697244.011739", "%f",
-__LINE__, -7.449533988369018e+08,	"-7.449534e+08", "%+#7e",
-__LINE__, -7.465682839758801e-01,	"-7E-01", "%4.E",
-__LINE__, -7.466517843126368e-26,	"-7.5E-26", "%.1E",
-__LINE__, -7.471385785539900e+24,	"-7471385785539899515583783.795591", "%f",
-__LINE__, -7.478345583780341e+00,	"-7.478346e+00", "%e",
-__LINE__, -7.524759284626724e-06,	"-7.52476e-06", "%2g",
-__LINE__, -7.534831049342539e-19,	"-7.53483E-19", "%G",
-__LINE__, -7.540546673179273e+15,	"-8e+15", "%.1g",
-__LINE__, -7.543440436184003e-08,	"-7.54344E-08", "%6G",
-__LINE__, -7.558224240835564e-06,	"-7.55822e-06", "%g",
-__LINE__, -7.564132915154469e+23,	"-756413291515446850610260.298708", "%+f",
-__LINE__, -7.566590720355392e+15,	"-7.566591e+15", "%1.6e",
-__LINE__, -7.568565927479741e-01,	"-7.568566e-01", "%#6e",
-__LINE__, -7.615574141973305e-17,	"-7.6156e-17", "%+.5g",
-__LINE__, -7.641297631509318e-28,	"-8e-28", "%+.1g",
-__LINE__, -7.661227834163450e+09,	"-7661227834.1634497", "%+#.7f",
-__LINE__, -7.665934364070126e+11,	"-766593436407.0", "%.1f",
-__LINE__, -7.682500068463102e-27,	"-0.000000", "%+#f",
-__LINE__, -7.709363160273798e+15,	"-7.70936e+15", "%g",
-__LINE__, -7.712596019255238e+26,	"-7.7e+26", "%.2g",
-__LINE__, -7.730213358437991e+25,	"-7.7e+25", "%6.2g",
-__LINE__, -7.744420019068976e+05,	"-7.74442E+05", "%.5E",
-__LINE__, -7.745813181942296e+11,	"-7.7458132e+11", "%+.7e",
-__LINE__, -7.751004379716307e+16,	"-7.751004e+16", "%e",
-__LINE__, -7.759862226564527e-28,	"-7.75986e-28", "%g",
-__LINE__, -7.767838880221207e-27,	"-7.76784e-27", "%g",
-__LINE__, -7.776301142157532e-19,	"-0", "%2.f",
-__LINE__, -7.783944257077553e-14,	"-8e-14", "%3.g",
-__LINE__, -7.801587579382377e+28,	"-8e+28", "%+0.g",
-__LINE__, -7.806685979552780e+25,	"-7.806686E+25", "%E",
-__LINE__, -7.825968891331719e-05,	"-7.82597E-05", "%G",
-__LINE__, -7.826834158664018e+12,	"-7.826834E+12", "%+#E",
-__LINE__, -7.832536798726886e+24,	"-7.83254E+24", "%#1G",
-__LINE__, -7.840485340202362e-18,	"-0.000000", "%.6f",
-__LINE__, -7.843236212099233e+21,	"-7.84324e+21", "%g",
-__LINE__, -7.906644052019278e-13,	"-7.906644E-13", "%E",
-__LINE__, -7.908090440678874e-20,	"-7.90809E-20", "%#G",
-__LINE__, -7.917588593012283e+08,	"-7.917589E+08", "%+E",
-__LINE__, -7.929100086742454e+29,	"-792910008674245414539427656563.930213", "%f",
-__LINE__, -7.933235286034290e+26,	"-7.933235E+26", "%E",
-__LINE__, -7.943431966567875e-03,	"-0.0079434", "%+.5g",
-__LINE__, -7.950872643572970e-22,	"-7.95087e-22", "%2g",
-__LINE__, -7.971225555313069e-01,	"-0.797123", "%f",
-__LINE__, -7.978310272676090e-12,	"-0.000000", "%#f",
-__LINE__, -8.006805393896414e-29,	"-8.00681E-29", "%G",
-__LINE__, -8.006906303018830e+25,	"-8.00691E+25", "%+G",
-__LINE__, -8.008484654476057e+18,	"-8.008485e+18", "%5.6e",
-__LINE__, -8.008943512904249e+27,	"-8008943512904249217854157905.0943", "%+.4f",
-__LINE__, -8.016539743121665e+27,	"-8.01654E+27", "%G",
-__LINE__, -8.018247227006128e-05,	" -8E-05", "%7.G",
-__LINE__, -8.044391842561705e+21,	"-8.04439e+21", "%g",
-__LINE__, -8.081902305002036e-02,	"-8.081902E-02", "%E",
-__LINE__, -8.084193011936438e-03,	"-0.0080842", "%+5.5g",
-__LINE__, -8.105813534846529e-27,	"-0.000000", "%f",
-__LINE__, -8.128116892989251e+00,	"-8.12812", "%G",
-__LINE__, -8.136119035731877e+05,	"-8e+05", "%+0.g",
-__LINE__, -8.140584224052606e+14,	"-8E+14", "%5.G",
-__LINE__, -8.145928897003907e+13,	"-8.15E+13", "%.3G",
-__LINE__, -8.164495905907508e-02,	"-0.081645", "%G",
-__LINE__, -8.169602113313905e+20,	"-8.16960e+20", "%#g",
-__LINE__, -8.179181640418333e+24,	"-8.E+24", "%#.1G",
-__LINE__, -8.184324492264231e-18,	"-8.18432E-18", "%G",
-__LINE__, -8.186480473850516e-28,	"-0.000000", "%+f",
-__LINE__, -8.196858948158896e+07,	"-8.1969E+07", "%.4E",
-__LINE__, -8.213138534699043e-30,	"-0.000000", "%f",
-__LINE__, -8.221181368676532e-21,	"-8.221181E-21", "%#1E",
-__LINE__, -8.222605734191438e+16,	"-8.22261E+16", "%+G",
-__LINE__, -8.223925661091432e-14,	"-8.223926e-14", "%0e",
-__LINE__, -8.232281541044777e-01,	"-0.823228", "%f",
-__LINE__, -8.245536794508725e+22,	"-8E+22", "%6.G",
-__LINE__, -8.270687365305925e+25,	"-82706873653059247430974210.146815", "%f",
-__LINE__, -8.288978945738204e+11,	"-8.28898e+11", "%5g",
-__LINE__, -8.290628698333139e+02,	"-829.063", "%+G",
-__LINE__, -8.292416206056451e-16,	"-8.29242e-16", "%+g",
-__LINE__, -8.296322623746486e-13,	"-8.29632E-13", "%0.6G",
-__LINE__, -8.298321941376933e-16,	"-0.000000", "%+f",
-__LINE__, -8.302331258878365e+29,	"-8.30233E+29", "%0G",
-__LINE__, -8.309022429255061e+06,	"-8309022.429255", "%+f",
-__LINE__, -8.312786829254646e-23,	"-8.312787e-23", "%e",
-__LINE__, -8.313852965178063e-15,	"-8.313853e-15", "%#7e",
-__LINE__, -8.317529094827869e+16,	"-8.31753E+16", "%2G",
-__LINE__, -8.322847660882248e-17,	"-0.000000", "%f",
-__LINE__, -8.324060602752638e-30,	"-8.32406e-30", "%#g",
-__LINE__, -8.325043500735461e+27,	"-8325043500735461066142306663.095951", "%#f",
-__LINE__, -8.332432016286935e-02,	"-0.0833243", "%g",
-__LINE__, -8.334251670232117e-09,	"-8.33425e-09", "%g",
-__LINE__, -8.338076225141778e+02,	"-833.808", "%g",
-__LINE__, -8.338349587571534e-23,	"-8.33835e-23", "%+2g",
-__LINE__, -8.342420812231939e+23,	"-834242081223193920891390.00745", "%+0.5f",
-__LINE__, -8.347404637940894e+17,	"-8.347405e+17", "%+e",
-__LINE__, -8.367002601133880e-12,	"-0.000000", "%#2.6f",
-__LINE__, -8.368579538210858e-17,	"-8.36858e-17", "%5g",
-__LINE__, -8.392398522472401e-10,	"-0.0000", "%.4f",
-__LINE__, -8.393029677635258e-29,	" -8E-29", "%7.G",
-__LINE__, -8.393843230819225e-11,	"-8.393843E-11", "%E",
-__LINE__, -8.397239871789148e-11,	"-8.39724e-11", "%g",
-__LINE__, -8.402316358199041e-29,	"-0.000", "%3.3f",
-__LINE__, -8.402910159034304e-14,	"-8.4e-14", "%+0.3g",
-__LINE__, -8.414960962391726e+09,	"-8414960962.391726", "%#f",
-__LINE__, -8.417512471384889e-28,	"-8.417512e-28", "%e",
-__LINE__, -8.418719240222911e+21,	"-8418719240222911182058.851409", "%f",
-__LINE__, -8.421210956044195e-09,	"-0.00000", "%.5f",
-__LINE__, -8.422001733529095e+24,	"-8E+24", "%0.G",
-__LINE__, -8.443614453772469e+21,	"-8.44361E+21", "%+G",
-__LINE__, -8.445883044175737e-19,	"-0", "%+1.f",
-__LINE__, -8.460545304711022e-01,	"-0.846055", "%G",
-__LINE__, -8.470462532754567e+12,	"-8.47E+12", "%6.3G",
-__LINE__, -8.478488782426476e-07,	"-8.478489E-07", "%E",
-__LINE__, -8.478657582923923e+09,	"-8.5e+09", "%.2g",
-__LINE__, -8.482732098043366e+12,	"-8482732098043", "%5.f",
-__LINE__, -8.489112373854447e+07,	"-8.489e+07", "%#3.3e",
-__LINE__, -8.494153144629106e+02,	"-849.415", "%+g",
-__LINE__, -8.496331191616493e+28,	"-8E+28", "%+6.G",
-__LINE__, -8.503711894495339e+05,	"-850371", "%g",
-__LINE__, -8.505271893964268e+14,	"-8.505272E+14", "%E",
-__LINE__, -8.509873985358741e+15,	"-9.e+15", "%#7.g",
-__LINE__, -8.518336897898081e-20,	"-8.51834E-20", "%G",
-__LINE__, -8.529588044136128e+21,	"-8.529588E+21", "%E",
-__LINE__, -8.539706586811079e-23,	"-8.53971E-23", "%G",
-__LINE__, -8.545924619642008e+10,	"-8.545925e+10", "%6e",
-__LINE__, -8.572893681637353e+09,	"-8.57289E+09", "%G",
-__LINE__, -8.585483717692345e+29,	"-8.58548E+29", "%+G",
-__LINE__, -8.586092014292309e+27,	"-8.59e+27", "%.2e",
-__LINE__, -8.604716827086833e-26,	"-8.60472e-26", "%g",
-__LINE__, -8.621349224186615e-04,	"-0.000862", "%f",
-__LINE__, -8.626097065201103e-21,	"   -0", "%5.f",
-__LINE__, -8.631700514212522e-16,	"-8.631701E-16", "%+E",
-__LINE__, -8.634703359975640e-09,	"-0.000000", "%+5f",
-__LINE__, -8.639393025443855e-17,	"-8.63939e-17", "%g",
-__LINE__, -8.640641942556812e-11,	"-8.64064e-11", "%#g",
-__LINE__, -8.646260250525495e-09,	"-0.000", "%.3f",
-__LINE__, -8.667322015806242e+09,	"-8667322015.806242", "%+#f",
-__LINE__, -8.690705655554451e+10,	"-8.690706E+10", "%#E",
-__LINE__, -8.714299893763934e-07,	"-8.7143E-07", "%.5G",
-__LINE__, -8.715729756264988e+27,	"-8.71573E+27", "%+.6G",
-__LINE__, -8.716518487180945e+16,	"-9e+16", "%3.e",
-__LINE__, -8.744404488756237e+25,	"-87444044887562366596966967.335902", "%4f",
-__LINE__, -8.754720498369242e+13,	"-8.75472e+13", "%g",
-__LINE__, -8.763198097931010e-19,	"-8.76320e-19", "%#g",
-__LINE__, -8.779007408852458e+28,	"-8.77901E+28", "%G",
-__LINE__, -8.794576202907937e+11,	"-8.79458E+11", "%#2.6G",
-__LINE__, -8.799091520612418e-11,	"-8.799E-11", "%3.4G",
-__LINE__, -8.799246265524921e+11,	"-8.79925E+11", "%G",
-__LINE__, -8.809010508550436e-04,	"-8.8090E-04", "%.4E",
-__LINE__, -8.817389999872653e-10,	"-8.81739e-10", "%g",
-__LINE__, -8.842022428985267e-28,	"-8.842022E-28", "%E",
-__LINE__, -8.851265987586864e-07,	"-0.000001", "%f",
-__LINE__, -8.861985131432196e+03,	"-8861.985", "%+.7G",
-__LINE__, -8.874449013455113e-29,	"-8.874449e-29", "%e",
-__LINE__, -8.878752609483453e+18,	"-8.87875E+18", "%G",
-__LINE__, -8.882501665315313e-04,	"-0.00088825", "%+G",
-__LINE__, -8.892056241505784e-14,	"-8.89206E-14", "%G",
-__LINE__, -8.895327674961603e-30,	"-8.89533E-30", "%G",
-__LINE__, -8.900059462213669e-30,	"-8.900059E-30", "%+#E",
-__LINE__, -8.957100548759815e+18,	"-9e+18", "%3.0e",
-__LINE__, -8.961352369869012e-30,	"-8.961352e-30", "%+#2e",
-__LINE__, -8.962296474587800e+02,	"-896", "%4.f",
-__LINE__, -8.962536469328530e-12,	"-8.96254E-12", "%G",
-__LINE__, -8.963299420391932e+21,	"-8.9633e+21", "%g",
-__LINE__, -8.967736672941522e-11,	"-8.96774e-11", "%g",
-__LINE__, -8.994077362462679e+11,	"-8.9940774e+11", "%+#.7e",
-__LINE__, -9.000452862345622e+15,	"-9e+15", "%2.e",
-__LINE__, -9.007489135361462e+07,	"-9.0075E+07", "%+2.4E",
-__LINE__, -9.036271805879910e+16,	"-9.03627E+16", "%G",
-__LINE__, -9.036319073700248e+22,	"-9.03632e+22", "%1g",
-__LINE__, -9.043207635989237e+11,	"-9.043208e+11", "%#e",
-__LINE__, -9.043856598625815e-26,	"-9e-26", "%+1.g",
-__LINE__, -9.052760561065698e+14,	"-9.052761E+14", "%E",
-__LINE__, -9.066480297957160e-06,	"-9E-06", "%+1.G",
-__LINE__, -9.070971376440752e-01,	"-0.907097", "%g",
-__LINE__, -9.073301831888273e+09,	"-9.07330E+09", "%#G",
-__LINE__, -9.091228662702147e+28,	"-9E+28", "%4.G",
-__LINE__, -9.093652024983832e+04,	"-9.093652E+04", "%7.6E",
-__LINE__, -9.098945831139295e-04,	"-9.098946E-04", "%+1.6E",
-__LINE__, -9.124981449916591e+05,	"-912498", "%G",
-__LINE__, -9.132038703003394e-02,	"-0.0913204", "%#G",
-__LINE__, -9.138271437433964e-04,	"-0.000913827", "%5g",
-__LINE__, -9.158186427463699e-04,	"-0.000915819", "%g",
-__LINE__, -9.160846358172526e+16,	"-9.160846E+16", "%#E",
-__LINE__, -9.160884330810163e+17,	"-9E+17", "%+5.G",
-__LINE__, -9.190271387375542e+21,	"-9.19027e+21", "%+g",
-__LINE__, -9.191651872412619e-04,	"-9.191652E-04", "%E",
-__LINE__, -9.196426161984341e-10,	"-9E-10", "%4.G",
-__LINE__, -9.201074139774962e+09,	"-9E+09", "%4.G",
-__LINE__, -9.223294284802762e+09,	"-9.22329E+09", "%G",
-__LINE__, -9.224740266754996e+02,	"-9E+02", "%6.0G",
-__LINE__, -9.231583780512302e-01,	"  -0.9", "%6.g",
-__LINE__, -9.241998826543689e+07,	"-92419988", "%1.f",
-__LINE__, -9.243603351372128e+27,	"-9.243603e+27", "%#e",
-__LINE__, -9.255922697415071e+11,	"-9.25592e+11", "%g",
-__LINE__, -9.265734968114124e-02,	"-0.092657", "%f",
-__LINE__, -9.273132068521061e+11,	"-9.27313E+11", "%G",
-__LINE__, -9.276017912826685e+27,	"-9.E+27", "%+#5.G",
-__LINE__, -9.279781279788505e+17,	"-9.27978E+17", "%7G",
-__LINE__, -9.305057549822465e-19,	"-9.30506E-19", "%5G",
-__LINE__, -9.313182384508469e+18,	"-9.31318E+18", "%G",
-__LINE__, -9.313350925182641e-12,	"-9.31E-12", "%.3G",
-__LINE__, -9.362202657509130e+08,	"-9e+08", "%.1g",
-__LINE__, -9.367344757598381e+19,	"-9.36734e+19", "%g",
-__LINE__, -9.374222399774300e+26,	"-9.37422e+26", "%4g",
-__LINE__, -9.385734023305105e+02,	"-9.385734e+02", "%+0e",
-__LINE__, -9.392042570618909e+17,	"-9.39204E+17", "%G",
-__LINE__, -9.395742939311926e+20,	"-939574293931192627837.8451", "%.4f",
-__LINE__, -9.409066155962469e+09,	"-9.40907E+09", "%#G",
-__LINE__, -9.412851077799790e+23,	"-9.412851E+23", "%E",
-__LINE__, -9.431808019049818e+08,	"-9.43181e+08", "%g",
-__LINE__, -9.465236900519924e-27,	"-9.46524e-27", "%g",
-__LINE__, -9.478330386415852e+17,	"-9.478330e+17", "%e",
-__LINE__, -9.510393719697428e+15,	"-9.51039E+15", "%+G",
-__LINE__, -9.534229599909890e-09,	"-0.000000", "%f",
-__LINE__, -9.541731189284823e-17,	"-1.E-16", "%+#7.G",
-__LINE__, -9.548861908445902e+24,	"-9548861908445902102471336.547751", "%f",
-__LINE__, -9.578447281451794e+14,	"-957844728145179", "%5.f",
-__LINE__, -9.580512736933464e+11,	"-9.58051E+11", "%G",
-__LINE__, -9.596838169770637e-28,	"-1E-27", "%+6.G",
-__LINE__, -9.597528852877852e-22,	"-1e-21", "%2.1g",
-__LINE__, -9.599943658427051e+02,	"-9.599944E+02", "%E",
-__LINE__, -9.603227991185260e-14,	"-1E-13", "%+0.E",
-__LINE__, -9.606818733892343e+08,	"-960681873.389", "%1.3f",
-__LINE__, -9.617442692720937e+16,	"-9.61744E+16", "%G",
-__LINE__, -9.628685516961109e+29,	"-9.62869e+29", "%3g",
-__LINE__, -9.638354750455226e-11,	"-0.000000", "%f",
-__LINE__, -9.644266379029137e+16,	"-96442663790291369.707575", "%f",
-__LINE__, -9.645563533575482e+06,	"-1E+07", "%1.G",
-__LINE__, -9.645993536742941e-29,	"-9.64599e-29", "%+g",
-__LINE__, -9.647147223548563e+00,	"-9.647147e+00", "%e",
-__LINE__, -9.671225879906396e-11,	"-0", "%0.f",
-__LINE__, -9.675000471729906e-09,	"-9.675000E-09", "%E",
-__LINE__, -9.683992878297159e-26,	"-9.68e-26", "%2.2e",
-__LINE__, -9.695491325144765e+10,	"-9.69549E+10", "%#G",
-__LINE__, -9.695661526907136e-24,	"   -0.", "%#6.f",
-__LINE__, -9.703124881970338e+07,	"-9.703e+07", "%0.4g",
-__LINE__, -9.707701257031864e+26,	"-970770125703186437249314622.022212", "%f",
-__LINE__, -9.709879792694702e+09,	"-9.709880E+09", "%E",
-__LINE__, -9.736052226907940e+26,	"-9.73605e+26", "%+#g",
-__LINE__, -9.745037157520795e+07,	"-9.74504e+07", "%#5.6g",
-__LINE__, -9.757293950670832e-29,	"-9.757E-29", "%0.4G",
-__LINE__, -9.762126832689880e+12,	"-9.76213E+12", "%G",
-__LINE__, -9.801328150341989e-01,	"     -1", "%7.G",
-__LINE__, -9.837332964629669e-20,	"-9.83733E-20", "%0G",
-__LINE__, -9.837790327283010e+23,	"-1E+24", "%.1G",
-__LINE__, -9.839636176463729e+23,	"-9.83964E+23", "%#6.5E",
-__LINE__, -9.841454250618272e+11,	"-9.84E+11", "%+2.3G",
-__LINE__, -9.852920805249280e-12,	"-9.852921e-12", "%.7g",
-__LINE__, -9.854092850182351e+12,	"-9.85409e+12", "%0g",
-__LINE__, -9.866796026839712e+02,	"-9.9E+02", "%#.1E",
-__LINE__, -9.867413260289803e-21,	"-1e-20", "%.1g",
-__LINE__, -9.882136052131983e-08,	"-9.88214e-08", "%g",
-__LINE__, -9.882755697941866e+20,	"-9.882756E+20", "%E",
-__LINE__, -9.897275811087050e+20,	"-9.9E+20", "%0.3G",
-__LINE__, -9.899860651812364e-04,	"-9.899861e-04", "%e",
-__LINE__, -9.906754113555550e-11,	"-9.90675e-11", "%3g",
-__LINE__, -9.926067557389940e+11,	"-9.92607E+11", "%G",
-__LINE__, -9.929638609014063e+17,	"-992963860901406292.214233", "%1f",
-__LINE__, -9.941214552193284e-24,	"-0.000000", "%+#f",
-__LINE__, -9.942875240256573e+14,	"-9.942875e+14", "%+1e",
-__LINE__, -9.944492909695798e-01,	"-9.944E-01", "%.3E",
-__LINE__, -9.954710507359939e-27,	"-1e-26", "%+0.2g",
-__LINE__, -9.955410507742851e+03,	"-9955.41", "%+G",
-__LINE__, -9.974437672251590e+02,	"-997.444", "%#G",
-__LINE__, -9.975683165288929e-26,	"-9.97568E-26", "%6G",
-__LINE__, 1.003827370583415e+06,	"1003827.370583", "%3f",
-__LINE__, 1.004189065268560e-27,	"1.004189E-27", "%.7G",
-__LINE__, 1.005840059175462e-28,	"+1.00584E-28", "%+G",
-__LINE__, 1.006586790090557e-12,	"0.000000", "%#f",
-__LINE__, 1.007598594773359e+18,	"1.0076E+18", "%G",
-__LINE__, 1.007902307001894e+29,	"1.0079e+29", "%g",
-__LINE__, 1.008607405036580e-15,	"1.00861E-15", "%6G",
-__LINE__, 1.008769102466771e+16,	"+1.00877E+16", "%+G",
-__LINE__, 1.009545698372534e-08,	"+1E-08", "%+0.0G",
-__LINE__, 1.010173673945099e-12,	"+1.01017e-12", "%+#0g",
-__LINE__, 1.011375000606627e+09,	"1011375000.606627", "%f",
-__LINE__, 1.011944652221650e+15,	"1011944652221649.98", "%3.2f",
-__LINE__, 1.013057788090379e-21,	"0.000000", "%#f",
-__LINE__, 1.014525729953198e+15,	"1.01453e+15", "%3g",
-__LINE__, 1.016760538234615e-21,	"+1.016761E-21", "%+3E",
-__LINE__, 1.017052611781237e-29,	"0.000000", "%f",
-__LINE__, 1.018471223361229e+14,	"1.01847E+14", "%G",
-__LINE__, 1.021646959220873e+15,	"1021646959220872.6", "%4.1f",
-__LINE__, 1.022304833976590e+27,	"1.0223e+27", "%g",
-__LINE__, 1.022500312067325e-12,	"1.0225e-12", "%6g",
-__LINE__, 1.023019285462627e-20,	"0.000000", "%f",
-__LINE__, 1.024192579400824e+06,	"1.02419e+06", "%g",
-__LINE__, 1.024517953555766e-28,	"1.02452E-28", "%G",
-__LINE__, 1.026673589339585e+21,	"1.02667E+21", "%G",
-__LINE__, 1.027231090958880e-19,	"1.E-19", "%#3.G",
-__LINE__, 1.028249904956487e-27,	"1E-27", "%5.G",
-__LINE__, 1.028570144661448e-28,	"+1.02857E-28", "%+G",
-__LINE__, 1.028934898454705e-13,	"+1.028935E-13", "%+E",
-__LINE__, 1.029071053545906e-26,	"1.029071E-26", "%E",
-__LINE__, 1.032672895881148e-30,	"+1.032673E-30", "%+E",
-__LINE__, 1.033502358979511e+06,	"1.0335E+06", "%.5G",
-__LINE__, 1.036790427717847e+19,	"1e+19", "%4.g",
-__LINE__, 1.037022928821648e+03,	"1037.02", "%5g",
-__LINE__, 1.040551683941284e+14,	"1.04055E+14", "%G",
-__LINE__, 1.044499252101308e-17,	"1.044499E-17", "%E",
-__LINE__, 1.045791899570889e+15,	"+1.04579e+15", "%+g",
-__LINE__, 1.048730383198703e+28,	"1.049e+28", "%.4g",
-__LINE__, 1.050654419882509e-18,	"0.000000", "%f",
-__LINE__, 1.052600569262127e-27,	"+0.000", "%+2.3f",
-__LINE__, 1.053213014784149e+15,	"1E+15", "%4.G",
-__LINE__, 1.057553916225948e-15,	"+0.000000", "%+4f",
-__LINE__, 1.058191244482453e+19,	"1.058e+19", "%.3e",
-__LINE__, 1.058746269793972e-26,	"+1.1E-26", "%+.2G",
-__LINE__, 1.058793271960762e-01,	"+1.058793E-01", "%+4E",
-__LINE__, 1.058869592738370e-19,	"1.05887e-19", "%3g",
-__LINE__, 1.060402312803008e+15,	"1060402312803008.229025", "%f",
-__LINE__, 1.061106284763095e+00,	"1.061106", "%0f",
-__LINE__, 1.061180160987467e+09,	"1e+09", "%2.g",
-__LINE__, 1.061181537176067e-06,	"+1.06118e-06", "%+g",
-__LINE__, 1.065021381771174e+20,	"1.06502e+20", "%g",
-__LINE__, 1.065464040401130e-16,	"1.065464e-16", "%e",
-__LINE__, 1.065573419819459e-05,	"0.00001", "%.5f",
-__LINE__, 1.066107764306644e+13,	"1.066108e+13", "%#e",
-__LINE__, 1.071318759598956e+12,	"1.071319e+12", "%e",
-__LINE__, 1.071564727222321e+10,	"1.072E+10", "%3.4G",
-__LINE__, 1.074652481218139e+14,	"1.0747E+14", "%.4E",
-__LINE__, 1.078453684911309e-02,	"0.0107845", "%g",
-__LINE__, 1.078550811446675e-05,	"1.07855e-05", "%g",
-__LINE__, 1.078780494515273e-04,	"0.000107878", "%4G",
-__LINE__, 1.079467488876157e-16,	"+1.079467E-16", "%+E",
-__LINE__, 1.080529722917934e-20,	"0.000000", "%f",
-__LINE__, 1.082169127709439e+01,	"10.8217", "%#5g",
-__LINE__, 1.087241285590951e+22,	"1E+22", "%4.G",
-__LINE__, 1.091049208406195e-14,	"0.0000", "%.4f",
-__LINE__, 1.095316064213237e+16,	"+1e+16", "%+0.g",
-__LINE__, 1.095349083237975e-04,	"1.095349e-04", "%5e",
-__LINE__, 1.098002465452836e+12,	"1098002465452.836205", "%f",
-__LINE__, 1.098445764138997e+13,	"1.09845E+13", "%G",
-__LINE__, 1.099968047892474e-13,	"1.1e-13", "%2.5g",
-__LINE__, 1.101017598311363e-04,	"0.000110102", "%G",
-__LINE__, 1.102776332077817e+18,	"1.103e+18", "%.3e",
-__LINE__, 1.103734053887830e-01,	"0.110373", "%f",
-__LINE__, 1.105730106869006e-03,	"0.00110573", "%g",
-__LINE__, 1.106366781854058e-10,	"1.10637e-10", "%g",
-__LINE__, 1.107354763213839e+15,	"1.107355e+15", "%6e",
-__LINE__, 1.108151709609825e-10,	"+1.10815E-10", "%+G",
-__LINE__, 1.110054501993647e+21,	"+1.11005E+21", "%+G",
-__LINE__, 1.111574814737873e-17,	"+1.112E-17", "%+1.4G",
-__LINE__, 1.111865512360108e-15,	"1E-15", "%.0G",
-__LINE__, 1.112281568330498e-03,	"1.112282e-03", "%.6e",
-__LINE__, 1.112625415174238e+21,	"+1.11263e+21", "%+g",
-__LINE__, 1.112744974910395e-02,	"0.011127", "%f",
-__LINE__, 1.114726566979885e-10,	"1.11473e-10", "%g",
-__LINE__, 1.115395843055731e-20,	"+0.000000", "%+6f",
-__LINE__, 1.115983414693121e+15,	"1.11598e+15", "%5.6g",
-__LINE__, 1.116118842074266e+27,	"1.116119e+27", "%e",
-__LINE__, 1.118386983012328e+19,	"11183869830123276400.968280", "%1f",
-__LINE__, 1.119344607892718e-22,	"1.119345e-22", "%e",
-__LINE__, 1.120560837110279e-19,	"0.000000", "%f",
-__LINE__, 1.123620157906291e-02,	"0.0112362", "%G",
-__LINE__, 1.126804857639478e+29,	"1.1268E+29", "%#0.5G",
-__LINE__, 1.128962199461581e+11,	"1.12896e+11", "%g",
-__LINE__, 1.129878714246809e-16,	"1E-16", "%0.0G",
-__LINE__, 1.130331982972407e-06,	"+0.", "%+#1.f",
-__LINE__, 1.134167332070028e-16,	"0", "%0.0f",
-__LINE__, 1.134248080053598e-28,	"0.000000", "%f",
-__LINE__, 1.136023160708119e-10,	"+0.000000", "%+1f",
-__LINE__, 1.136167141059036e+23,	"113616714105903593434732.101741", "%f",
-__LINE__, 1.136439499920164e+10,	"+1.13644E+10", "%+G",
-__LINE__, 1.136859734932182e+24,	"1.13686e+24", "%g",
-__LINE__, 1.138985939448731e+09,	"1.13899e+09", "%2g",
-__LINE__, 1.139287324790407e-25,	"1e-25", "%.1g",
-__LINE__, 1.140559912153251e+06,	"1.14056e+06", "%g",
-__LINE__, 1.141318036027086e-26,	"1.14132E-26", "%G",
-__LINE__, 1.142586049368452e-20,	"+1.14259E-20", "%+7.5E",
-__LINE__, 1.143283863993333e-17,	"1.143284E-17", "%3E",
-__LINE__, 1.144637911632432e-28,	"1.144638E-28", "%#3E",
-__LINE__, 1.145791416532065e-10,	"1.14579e-10", "%g",
-__LINE__, 1.146958047315780e-17,	"1.146958e-17", "%e",
-__LINE__, 1.147898346886569e-08,	"1E-08", "%3.0E",
-__LINE__, 1.149724744965608e-14,	"1.14972e-14", "%5g",
-__LINE__, 1.155383721940441e-10,	"1e-10", "%1.g",
-__LINE__, 1.157066617729094e-02,	"0", "%1.f",
-__LINE__, 1.157893614537215e+05,	"1.157894E+05", "%E",
-__LINE__, 1.160476344451928e-19,	"1.2e-19", "%.1e",
-__LINE__, 1.161610499315966e-26,	"1.161610E-26", "%E",
-__LINE__, 1.162345042181490e+29,	"116234504218148981813385489658.685401", "%5.6f",
-__LINE__, 1.162376053722862e+23,	"1.16238e+23", "%g",
-__LINE__, 1.162996084782483e+18,	"+1e+18", "%+0.g",
-__LINE__, 1.163544861478966e+26,	"1.16354E+26", "%G",
-__LINE__, 1.167300137450931e+06,	"1E+06", "%.0G",
-__LINE__, 1.168693829096401e-30,	"+1.16869e-30", "%+g",
-__LINE__, 1.172791369381396e+15,	"1.173E+15", "%.4G",
-__LINE__, 1.174427110782028e-29,	"  1E-29", "%7.G",
-__LINE__, 1.179498322112450e+27,	"1179498322112449759657692993.641831", "%f",
-__LINE__, 1.179555606293547e+27,	"1.17956e+27", "%3g",
-__LINE__, 1.180815814881269e+06,	"1.180816e+06", "%e",
-__LINE__, 1.181494870072805e+20,	"1.181495e+20", "%5e",
-__LINE__, 1.181524119225619e+12,	"+1181524119225.61917", "%+5.5f",
-__LINE__, 1.182111212289243e-20,	"1e-20", "%4.g",
-__LINE__, 1.184503315019769e-27,	"1.1845e-27", "%7g",
-__LINE__, 1.186413646767670e+29,	"1.18641e+29", "%g",
-__LINE__, 1.186852938885004e-13,	"1.18685e-13", "%4g",
-__LINE__, 1.188837612473914e+05,	"1e+05", "%.0g",
-__LINE__, 1.190317482928293e-29,	"1.190317e-29", "%e",
-__LINE__, 1.190527491143987e+02,	"1.190527E+02", "%E",
-__LINE__, 1.191823062060233e-30,	"1.2E-30", "%6.2G",
-__LINE__, 1.191926974812428e-23,	"1.2e-23", "%.2g",
-__LINE__, 1.193549622366544e-25,	"1E-25", "%4.1G",
-__LINE__, 1.195517368629765e-21,	"1.195517e-21", "%1.7g",
-__LINE__, 1.195573061651289e-27,	"1.19557e-27", "%#g",
-__LINE__, 1.195806681188325e-03,	"+0.00120", "%+#.3G",
-__LINE__, 1.196842275192189e-28,	"1.19684e-28", "%g",
-__LINE__, 1.197307550969576e+04,	"1.1973E+04", "%.4E",
-__LINE__, 1.197608525847607e+15,	"1197608525847606.8062805", "%4.7f",
-__LINE__, 1.197801338159407e+04,	"11978", "%5G",
-__LINE__, 1.197813329735025e+27,	"1.19781E+27", "%7G",
-__LINE__, 1.199483904123253e-12,	"1.19948e-12", "%g",
-__LINE__, 1.199535292169766e-09,	"1.199535e-09", "%e",
-__LINE__, 1.201478067515135e+05,	"120147.806752", "%f",
-__LINE__, 1.202054662662158e+17,	"1.20205E+17", "%#G",
-__LINE__, 1.202111922368321e+07,	"+1.202112E+07", "%+#E",
-__LINE__, 1.202536892743791e-01,	"0.120254", "%#g",
-__LINE__, 1.205698674119882e-29,	"1.2057E-29", "%G",
-__LINE__, 1.208091664701942e-13,	" 0.", "%#3.f",
-__LINE__, 1.208942413954872e-17,	"1.20894E-17", "%G",
-__LINE__, 1.209704891496613e+10,	"1.210e+10", "%2.3e",
-__LINE__, 1.211355639334831e+29,	"1E+29", "%.0G",
-__LINE__, 1.211447553804203e+17,	"  1E+17", "%7.E",
-__LINE__, 1.212481583429790e-16,	"1.212482e-16", "%e",
-__LINE__, 1.212849001551862e+26,	"121284900155186181613942153.4899157", "%6.7f",
-__LINE__, 1.213057538677801e+06,	"1213057.538678", "%#.6f",
-__LINE__, 1.214609592911893e+25,	"1.214610e+25", "%#e",
-__LINE__, 1.216086266251665e+01,	"1e+01", "%5.e",
-__LINE__, 1.216468565931026e-22,	"1.216469E-22", "%1E",
-__LINE__, 1.216503126598765e+14,	"+1E+14", "%+0.E",
-__LINE__, 1.216641013695553e-14,	"0.000000", "%f",
-__LINE__, 1.223142246779504e-23,	"0.000000", "%f",
-__LINE__, 1.223884786443274e+08,	"122388479", "%5.f",
-__LINE__, 1.224012562770076e+29,	"1.22401e+29", "%0g",
-__LINE__, 1.225098157528297e+14,	"1.22510e+14", "%#g",
-__LINE__, 1.226306848505242e-22,	"1.22631E-22", "%G",
-__LINE__, 1.227487485547996e-08,	"+1.22749e-08", "%+g",
-__LINE__, 1.237206486909689e+02,	"+123.721", "%+#.6g",
-__LINE__, 1.240281126177077e-02,	"+0.01", "%+3.g",
-__LINE__, 1.241197211306994e-06,	"1.241197E-06", "%E",
-__LINE__, 1.241776311097410e+07,	"1.241776E+07", "%E",
-__LINE__, 1.245995986024999e-03,	"0.001246", "%g",
-__LINE__, 1.246082428199607e+03,	"1246.082428", "%f",
-__LINE__, 1.247021567954220e+05,	"  1e+05", "%7.g",
-__LINE__, 1.248140089618390e-30,	"+1.24814E-30", "%+G",
-__LINE__, 1.248403361652064e-30,	"+0.000000", "%+f",
-__LINE__, 1.251098538918842e-26,	"+1.251099E-26", "%+E",
-__LINE__, 1.251952633022061e+25,	"1.25195e+25", "%g",
-__LINE__, 1.253029705843461e-04,	"+1.E-04", "%+#4.E",
-__LINE__, 1.259562132729488e-09,	"1e-09", "%1.e",
-__LINE__, 1.261702205492260e-27,	"0.000000", "%f",
-__LINE__, 1.265910361926660e-19,	"+1.265910e-19", "%+e",
-__LINE__, 1.267411912651087e+12,	"1.26741E+12", "%1G",
-__LINE__, 1.267830718285980e-10,	"1.26783e-10", "%g",
-__LINE__, 1.268238378987517e-23,	"1E-23", "%5.E",
-__LINE__, 1.275543253354167e+10,	"1.27554E+10", "%G",
-__LINE__, 1.277255234454465e-10,	"1.27726E-10", "%5G",
-__LINE__, 1.280590949834150e-21,	"1.280591E-21", "%E",
-__LINE__, 1.285570453788242e-02,	"1.285570E-02", "%E",
-__LINE__, 1.287712130719031e+09,	"1287712130.719031", "%#f",
-__LINE__, 1.290142876187105e+29,	"+1.290143E+29", "%+E",
-__LINE__, 1.293129213191961e+21,	"1.29313E+21", "%G",
-__LINE__, 1.293317101334714e-23,	"+0.000000", "%+f",
-__LINE__, 1.294506813069071e-13,	"0.0", "%3.1f",
-__LINE__, 1.295576232685739e-22,	"+0.000000", "%+f",
-__LINE__, 1.296010470431800e-19,	"+0.000000", "%+6f",
-__LINE__, 1.298798231947674e+19,	"1.2988E+19", "%2G",
-__LINE__, 1.299521114379381e+09,	"1.29952E+09", "%G",
-__LINE__, 1.299847637892712e+24,	"1.299848e+24", "%e",
-__LINE__, 1.301269777843698e+29,	"130126977784369834978406288428.232074", "%f",
-__LINE__, 1.302911786437618e-15,	"     0", "%6.f",
-__LINE__, 1.303863159906719e+27,	"1303863159906719415559450681", "%0.f",
-__LINE__, 1.304396472326846e-12,	"+1E-12", "%+1.0G",
-__LINE__, 1.306180443528427e-30,	"+1e-30", "%+.1g",
-__LINE__, 1.308469138968514e+22,	"1.30847E+22", "%0G",
-__LINE__, 1.312700156826057e-11,	"1.3127e-11", "%g",
-__LINE__, 1.315364075120764e+21,	"+1.31536E+21", "%+G",
-__LINE__, 1.320376485288444e-09,	"+1.3204E-09", "%+6.5G",
-__LINE__, 1.321434154364635e-08,	"1.32143e-08", "%1g",
-__LINE__, 1.322777272579176e+19,	"+1e+19", "%+3.e",
-__LINE__, 1.322861663428564e+00,	"1.322862E+00", "%#E",
-__LINE__, 1.323566013489230e+14,	"+1.323566E+14", "%+1E",
-__LINE__, 1.327446904132973e-20,	"+1.32745E-20", "%+4.6G",
-__LINE__, 1.328226362528158e+19,	"1e+19", "%2.g",
-__LINE__, 1.329167460803610e+08,	"1e+08", "%3.g",
-__LINE__, 1.335371420823160e+14,	"1.33537E+14", "%7G",
-__LINE__, 1.336116185095935e-21,	"0.000000", "%f",
-__LINE__, 1.338766774704671e-22,	"+1.33877e-22", "%+g",
-__LINE__, 1.339199373014647e-12,	"1E-12", "%1.E",
-__LINE__, 1.344293357481519e+26,	"134429335748151945750805680.290796", "%#2f",
-__LINE__, 1.344328188122843e+29,	"1.34433e+29", "%g",
-__LINE__, 1.344382581316972e-05,	"1E-05", "%5.0E",
-__LINE__, 1.349835616116184e+11,	"134983561611.6", "%2.1f",
-__LINE__, 1.349955669989707e+20,	"134995566998970728533.890906", "%7f",
-__LINE__, 1.350230411093841e+20,	"135023041109384145386.229648", "%f",
-__LINE__, 1.353391369565576e+10,	"  1E+10", "%7.1G",
-__LINE__, 1.356889483699471e+22,	"+1.35689E+22", "%+G",
-__LINE__, 1.358141775798243e+24,	"+1358141775798242578687791.137781", "%+f",
-__LINE__, 1.358547541975523e-15,	"1.35855e-15", "%g",
-__LINE__, 1.363402539800791e+11,	"1.3634E+11", "%G",
-__LINE__, 1.363676837988798e+16,	"+13636768379887982.4053", "%+2.4f",
-__LINE__, 1.364592026494839e-24,	"1.36459e-24", "%g",
-__LINE__, 1.366664212399413e-09,	"+1E-09", "%+6.G",
-__LINE__, 1.367446193117463e-17,	"1.3674e-17", "%2.4e",
-__LINE__, 1.368681648785823e-18,	"1.36868E-18", "%3G",
-__LINE__, 1.370635189583606e+05,	"1.370635E+05", "%E",
-__LINE__, 1.371395540772186e-18,	"+1.371396e-18", "%+e",
-__LINE__, 1.371945318043159e+10,	"1E+10", "%0.E",
-__LINE__, 1.373780604772988e-21,	"1e-21", "%3.g",
-__LINE__, 1.374244970441862e-28,	"0.000000", "%7.6f",
-__LINE__, 1.375874695067149e-25,	"1.37587E-25", "%#3G",
-__LINE__, 1.377165614832621e+20,	"1.37717E+20", "%#G",
-__LINE__, 1.381541864946684e-09,	"1.38154E-09", "%G",
-__LINE__, 1.382901694835415e+00,	"1.382902E+00", "%E",
-__LINE__, 1.384250577530184e-21,	"1.384e-21", "%.4g",
-__LINE__, 1.385322753374640e-03,	" 1E-03", "%6.E",
-__LINE__, 1.387026156054724e+19,	"1.387026E+19", "%E",
-__LINE__, 1.388726735790498e-27,	"+1.388727E-27", "%+E",
-__LINE__, 1.388819105742044e+16,	"1.38882e+16", "%g",
-__LINE__, 1.389941086024951e-19,	"0.000000", "%f",
-__LINE__, 1.390101174785536e+25,	"1.3901E+25", "%G",
-__LINE__, 1.392210785638597e+24,	"+1.39221E+24", "%+G",
-__LINE__, 1.396148856283474e-26,	"1.4e-26", "%7.3g",
-__LINE__, 1.398153728631994e-21,	"1.39815E-21", "%G",
-__LINE__, 1.398332446762342e-14,	"+1.39833E-14", "%+5G",
-__LINE__, 1.400250919607987e+10,	"1.40025E+10", "%G",
-__LINE__, 1.400662469019739e+03,	"1.E+03", "%#0.0E",
-__LINE__, 1.401720273747805e-12,	"0.000000", "%#f",
-__LINE__, 1.402151358748719e+22,	"1.402151e+22", "%e",
-__LINE__, 1.402351913752357e-28,	"1.40235E-28", "%#1.6G",
-__LINE__, 1.403285877973810e+13,	"+14032858779738.097255", "%+4f",
-__LINE__, 1.404540981735861e+04,	"14045.409817", "%4f",
-__LINE__, 1.406420622355064e+19,	"1.40642E+19", "%G",
-__LINE__, 1.412552725962301e-29,	"+1e-29", "%+1.e",
-__LINE__, 1.413266982485044e+10,	"1.41327e+10", "%g",
-__LINE__, 1.413627189411456e+21,	"1.41363E+21", "%0G",
-__LINE__, 1.416647216002592e-25,	"+0.000000", "%+#f",
-__LINE__, 1.417107155080584e-10,	"1e-10", "%1.e",
-__LINE__, 1.418829895346648e+19,	"14188298953466484952.912197", "%f",
-__LINE__, 1.419404559267523e-11,	"1.4194e-11", "%g",
-__LINE__, 1.422421321425472e+15,	"1.422421E+15", "%E",
-__LINE__, 1.424858902008998e+18,	"1.42486E+18", "%2.5E",
-__LINE__, 1.428863051254205e+22,	"1.428863e+22", "%e",
-__LINE__, 1.429533727936725e-02,	"0.0142953", "%g",
-__LINE__, 1.430982219743369e-19,	" 1E-19", "%6.G",
-__LINE__, 1.431974118434703e+17,	"1E+17", "%3.G",
-__LINE__, 1.432418341970152e+16,	"+1.432418e+16", "%+5e",
-__LINE__, 1.433470281650523e+04,	"14334.7", "%g",
-__LINE__, 1.434446243424653e+24,	" +1e+24", "%+7.g",
-__LINE__, 1.435118019241039e+24,	"+1e+24", "%+4.g",
-__LINE__, 1.435691648420278e-01,	"0.1435692", "%#4.7g",
-__LINE__, 1.437569598098744e+27,	"1.437570E+27", "%#E",
-__LINE__, 1.437633484061726e-25,	"+1.43763e-25", "%+7g",
-__LINE__, 1.437866591230707e-13,	"1.43787e-13", "%g",
-__LINE__, 1.440593154445915e-01,	"+0.144059", "%+1G",
-__LINE__, 1.441368205977342e+16,	"1.441368E+16", "%#E",
-__LINE__, 1.441825266684367e+28,	"1.44183e+28", "%g",
-__LINE__, 1.442374183199456e+20,	"1.442374E+20", "%E",
-__LINE__, 1.445101893951061e-24,	"0", "%0.f",
-__LINE__, 1.446037835160094e-20,	"+1.44604E-20", "%+2G",
-__LINE__, 1.449245376093616e+04,	"1.449245e+04", "%e",
-__LINE__, 1.454126845620100e+09,	"1.45413E+09", "%G",
-__LINE__, 1.455764608801107e+09,	"1.5e+09", "%6.1e",
-__LINE__, 1.457176183149955e-12,	"1.45718e-12", "%#g",
-__LINE__, 1.458821535020046e-05,	"1.45882e-05", "%#g",
-__LINE__, 1.460179141161202e-19,	"1.460179E-19", "%#E",
-__LINE__, 1.461701055446198e-20,	"1.461701e-20", "%#2.7g",
-__LINE__, 1.462408181482172e+10,	"1.4624082E+10", "%3.7E",
-__LINE__, 1.463706296748154e+24,	"1e+24", "%2.g",
-__LINE__, 1.464891255780761e-19,	"+1.46489e-19", "%+g",
-__LINE__, 1.467903978945872e+25,	"1.4679E+25", "%G",
-__LINE__, 1.468585992857062e+22,	"14685859928570619281629.205943", "%f",
-__LINE__, 1.469803528668286e+29,	"+1E+29", "%+6.G",
-__LINE__, 1.469883002609266e-23,	"1.E-23", "%#2.E",
-__LINE__, 1.469941481858809e+08,	"+146994148.185881", "%+f",
-__LINE__, 1.470744493304611e+13,	"1.47074e+13", "%g",
-__LINE__, 1.471857261085004e+23,	"1E+23", "%2.G",
-__LINE__, 1.474419778873037e+06,	"1474419.7789", "%#.4f",
-__LINE__, 1.483134762223381e-03,	"0", "%0.0f",
-__LINE__, 1.483575501240724e-13,	"1.48358e-13", "%g",
-__LINE__, 1.486068112294452e+20,	"1.486068e+20", "%e",
-__LINE__, 1.488665528787761e-03,	"  +0", "%+4.f",
-__LINE__, 1.492145267536713e+07,	"14921452.675367", "%f",
-__LINE__, 1.492589762884761e-01,	"0.149259", "%f",
-__LINE__, 1.494784286168215e+01,	"1.494784E+01", "%E",
-__LINE__, 1.495945331501655e+04,	"1.5e+04", "%.2g",
-__LINE__, 1.501383201904700e+14,	"2e+14", "%1.g",
-__LINE__, 1.501387105011959e-02,	"0.0150139", "%g",
-__LINE__, 1.505784488562271e+26,	"1.50578e+26", "%5g",
-__LINE__, 1.506367986495534e+10,	"1.50637e+10", "%2g",
-__LINE__, 1.507421710226296e+19,	"1.507422E+19", "%#E",
-__LINE__, 1.507960881206134e+16,	"2e+16", "%.0g",
-__LINE__, 1.508974301049424e+14,	"+1.508974E+14", "%+E",
-__LINE__, 1.509204025111090e-18,	"1.509204E-18", "%E",
-__LINE__, 1.511351799767759e+21,	"1511351799767759462866.93397", "%.5f",
-__LINE__, 1.511712197184520e-06,	"+1.51171e-06", "%+1g",
-__LINE__, 1.514703727491400e+02,	"151.47", "%.5g",
-__LINE__, 1.514855355408287e+04,	"15148.6", "%g",
-__LINE__, 1.516256896575301e+06,	"1.516257e+06", "%.6e",
-__LINE__, 1.517712083681069e+14,	"1.51771e+14", "%0g",
-__LINE__, 1.522102209167607e-18,	"1.52210e-18", "%#g",
-__LINE__, 1.526264862895663e-12,	"0.000000", "%f",
-__LINE__, 1.527165480858125e+10,	"1.527e+10", "%.4g",
-__LINE__, 1.528363280308369e+00,	"+1.52836", "%+0G",
-__LINE__, 1.529108490733420e-22,	"1.529108E-22", "%E",
-__LINE__, 1.529783364474522e+19,	"15297833644745216119.531506", "%7f",
-__LINE__, 1.530698363199346e-01,	"0.1531", "%#.4f",
-__LINE__, 1.531520796537450e+22,	"1.53152E+22", "%G",
-__LINE__, 1.533314559644813e+06,	"+1533314.559645", "%+f",
-__LINE__, 1.534682791112854e+01,	"+15.3468", "%+0G",
-__LINE__, 1.534714026386730e-11,	"0.000000", "%f",
-__LINE__, 1.537145729498115e+00,	"1.537146E+00", "%E",
-__LINE__, 1.538740040875751e-23,	"1.538740E-23", "%E",
-__LINE__, 1.546248240596482e-03,	"0.001546", "%f",
-__LINE__, 1.546808012239302e-09,	"+1.54681E-09", "%+G",
-__LINE__, 1.546903877359107e+06,	"1.5e+06", "%.2g",
-__LINE__, 1.550153973747718e-18,	"2e-18", "%.0g",
-__LINE__, 1.551703460384378e+00,	"+1.5517", "%+.4f",
-__LINE__, 1.553995673101369e+29,	"1.554E+29", "%G",
-__LINE__, 1.555477017531899e+28,	"1.55548e+28", "%g",
-__LINE__, 1.555548963448462e+12,	"1555548963448.46227", "%6.5f",
-__LINE__, 1.558702451007712e+16,	"2e+16", "%5.1g",
-__LINE__, 1.561641587723724e+29,	"1.561642e+29", "%e",
-__LINE__, 1.561868589559509e-05,	"1.56187E-05", "%G",
-__LINE__, 1.565229056438949e+13,	"1.56523e+13", "%1.6g",
-__LINE__, 1.570074406600442e+14,	"+1.57007E+14", "%+4G",
-__LINE__, 1.570951909913194e+13,	"1.57095E+13", "%.6G",
-__LINE__, 1.572186421520727e-30,	"+1.57219e-30", "%+g",
-__LINE__, 1.574374582066945e+12,	"1.57e+12", "%5.2e",
-__LINE__, 1.577789404823585e+12,	"1.577789E+12", "%E",
-__LINE__, 1.579641278389186e+04,	"15796.413", "%7.3f",
-__LINE__, 1.581602330975388e+17,	"1.5816E+17", "%#.5G",
-__LINE__, 1.587809692297490e-18,	"+1.58781e-18", "%+2g",
-__LINE__, 1.588672954832388e-05,	"1.58867E-05", "%G",
-__LINE__, 1.594548954259978e+25,	"+1.595e+25", "%+.3e",
-__LINE__, 1.596653742160718e+10,	"15966537421.6072", "%.4f",
-__LINE__, 1.597416186584641e+25,	"1.59742e+25", "%g",
-__LINE__, 1.597810706039500e-04,	"0.000159781", "%g",
-__LINE__, 1.601425691153542e+01,	"16.0143", "%G",
-__LINE__, 1.601491150913706e-15,	"+1.60149e-15", "%+g",
-__LINE__, 1.609357026469645e+02,	"160.936", "%0g",
-__LINE__, 1.611064881461188e+06,	"+1.611065E+06", "%+E",
-__LINE__, 1.611324319640770e-03,	"0.00161132", "%G",
-__LINE__, 1.613202907940803e+19,	"1.6E+19", "%#.1E",
-__LINE__, 1.613883500056636e-12,	"0.000000", "%5f",
-__LINE__, 1.618254213010772e+07,	"16182542.130108", "%6f",
-__LINE__, 1.620441271211248e-08,	"1.62044E-08", "%0G",
-__LINE__, 1.622548435024803e-01,	"+0.162255", "%+5G",
-__LINE__, 1.623740394555269e+19,	"16237403945552689066.289531", "%3f",
-__LINE__, 1.625774250389937e+18,	"1.625774e+18", "%1e",
-__LINE__, 1.626300864432426e-02,	"0.016263", "%G",
-__LINE__, 1.626351146877694e-11,	"1.6263511e-11", "%2.7e",
-__LINE__, 1.626568757587995e+25,	"16265687575879949733348439.62220", "%6.5f",
-__LINE__, 1.626717482094360e-28,	"+1.626717e-28", "%+3e",
-__LINE__, 1.630801585998995e-28,	"1.6308e-28", "%0g",
-__LINE__, 1.631827173682962e+03,	"1632", "%1.4g",
-__LINE__, 1.631907571243379e+18,	"1631907571243378818.337533", "%f",
-__LINE__, 1.632058420447239e-14,	" +2E-14", "%+7.G",
-__LINE__, 1.632847882621240e+18,	"+1.63285E+18", "%+2G",
-__LINE__, 1.637329146233172e-09,	"+1.63733e-09", "%+g",
-__LINE__, 1.638315287442427e-16,	"+1.63832E-16", "%+G",
-__LINE__, 1.641284849351445e+15,	"1641284849351445.096488", "%f",
-__LINE__, 1.644871927486929e+10,	"2e+10", "%1.e",
-__LINE__, 1.645917293047431e-19,	"1.64592e-19", "%.6g",
-__LINE__, 1.649201265647819e-07,	"0.000000", "%f",
-__LINE__, 1.650169065733559e+23,	"165016906573355903731226.135278", "%3f",
-__LINE__, 1.651217291298196e-30,	"2E-30", "%4.G",
-__LINE__, 1.652680660160331e+08,	"2.e+08", "%#3.g",
-__LINE__, 1.654171892948767e-15,	"1.65417e-15", "%g",
-__LINE__, 1.655435863725412e+17,	"+1.655436e+17", "%+#e",
-__LINE__, 1.656015606204101e+28,	"+1.7E+28", "%+3.2G",
-__LINE__, 1.656814723110478e-21,	"+0.000000", "%+f",
-__LINE__, 1.658632655199721e-19,	"2.E-19", "%#4.G",
-__LINE__, 1.659915061311444e+27,	"1.66E+27", "%.3G",
-__LINE__, 1.664258574522914e-29,	"+1.664259E-29", "%+E",
-__LINE__, 1.667662840654469e-28,	"+2e-28", "%+0.g",
-__LINE__, 1.673124993246863e-25,	"+0.000000", "%+f",
-__LINE__, 1.677788498058833e-20,	"1.678e-20", "%.4g",
-__LINE__, 1.681211731173386e-07,	"1.68121e-07", "%0.6g",
-__LINE__, 1.686341560076196e+02,	"169", "%.0f",
-__LINE__, 1.686507685287281e+08,	"1.686508E+08", "%E",
-__LINE__, 1.689500448795801e+03,	"+1689.500449", "%+0f",
-__LINE__, 1.690639426041009e-13,	"2e-13", "%5.0g",
-__LINE__, 1.691554939595928e+16,	"+1.6916e+16", "%+.5g",
-__LINE__, 1.698597126229626e-09,	"1.699e-09", "%3.4g",
-__LINE__, 1.700093083173516e+16,	"17000930831735159", "%5.f",
-__LINE__, 1.703653732982710e+13,	"+1.70365e+13", "%+g",
-__LINE__, 1.705353380573352e-16,	"0.000000", "%f",
-__LINE__, 1.705973328700179e-26,	"1.70597e-26", "%5g",
-__LINE__, 1.717797289369145e+22,	"+1.717797E+22", "%+7E",
-__LINE__, 1.722819196705361e-28,	"1.722819E-28", "%1.7G",
-__LINE__, 1.723775772891202e+01,	"17.237758", "%f",
-__LINE__, 1.723787102325353e-23,	"0.000000", "%2f",
-__LINE__, 1.724551301171870e-13,	"0.000000", "%f",
-__LINE__, 1.726098078655758e-20,	"0.0000000", "%7.7f",
-__LINE__, 1.726302822039762e+18,	"+2E+18", "%+1.G",
-__LINE__, 1.726659209108151e+18,	"+1.72666E+18", "%+6G",
-__LINE__, 1.728324925097269e-25,	"1.728325e-25", "%7e",
-__LINE__, 1.728357491215602e+02,	"172.836", "%G",
-__LINE__, 1.729612227517587e+22,	"1.729612e+22", "%e",
-__LINE__, 1.731753104740805e-06,	"1.73175e-06", "%2g",
-__LINE__, 1.736066279733589e+18,	"+1.736066E+18", "%+3E",
-__LINE__, 1.736626769480182e-19,	"2e-19", "%.0g",
-__LINE__, 1.737445267713118e-13,	"  2e-13", "%7.g",
-__LINE__, 1.739264683023077e+05,	"173926.468302", "%f",
-__LINE__, 1.739423702667596e-16,	"+1.73942e-16", "%+g",
-__LINE__, 1.741053616961658e-14,	"1.74105E-14", "%G",
-__LINE__, 1.741085952255057e+29,	"1.7e+29", "%#.1e",
-__LINE__, 1.743673705633426e+03,	"2E+03", "%5.0G",
-__LINE__, 1.750940899205665e+27,	"1.75094e+27", "%g",
-__LINE__, 1.753871003884151e-26,	"0.", "%#.0f",
-__LINE__, 1.755237470854478e-14,	"1.755237e-14", "%4e",
-__LINE__, 1.757491419837315e-03,	"0.002", "%1.G",
-__LINE__, 1.758657797688126e+26,	"+1.75866E+26", "%+#G",
-__LINE__, 1.760491452270889e+08,	"1.76049E+08", "%G",
-__LINE__, 1.760816275862939e-10,	"2e-10", "%.1g",
-__LINE__, 1.760905893493003e-22,	"1.76e-22", "%.2e",
-__LINE__, 1.762101125986743e-12,	"2e-12", "%.0g",
-__LINE__, 1.763855968659571e+27,	"1.763856E+27", "%E",
-__LINE__, 1.764595217341348e-13,	"1.764595E-13", "%E",
-__LINE__, 1.766737296048445e+08,	"+1.77e+08", "%+.3g",
-__LINE__, 1.769916386969961e-05,	"+1.76992e-05", "%+g",
-__LINE__, 1.773873506344176e-01,	"1.773874e-01", "%e",
-__LINE__, 1.775392554371421e+03,	"+1775.39", "%+3.2f",
-__LINE__, 1.776007623006870e+24,	"1776007623006870161930237.372871", "%f",
-__LINE__, 1.777418921678653e-27,	"     0", "%6.f",
-__LINE__, 1.780967607234234e-18,	"1.780968E-18", "%E",
-__LINE__, 1.782510583486435e+24,	"+2e+24", "%+3.g",
-__LINE__, 1.784002921603004e+14,	"1.784E+14", "%G",
-__LINE__, 1.784231151778382e+11,	"1.7842E+11", "%.5G",
-__LINE__, 1.785589091453195e+02,	" 179.", "%#5.f",
-__LINE__, 1.786402639400039e+19,	"2e+19", "%0.g",
-__LINE__, 1.786506485794647e-25,	"2E-25", "%.1G",
-__LINE__, 1.787513971482493e-04,	"+0.000178751", "%+G",
-__LINE__, 1.799765409320039e+23,	"179976540932003885586710", "%6.0f",
-__LINE__, 1.800451864218989e+08,	"+1.80045e+08", "%+g",
-__LINE__, 1.800743538258572e+04,	" +18007", "%+7.f",
-__LINE__, 1.801583764453362e+25,	"1.8016e+25", "%0.5g",
-__LINE__, 1.804502093739547e+14,	"2e+14", "%2.g",
-__LINE__, 1.805600104488678e-17,	"1.805600E-17", "%E",
-__LINE__, 1.811342448081048e+17,	"1.811342e+17", "%.6e",
-__LINE__, 1.812252160066930e+19,	"2e+19", "%0.e",
-__LINE__, 1.816287564395273e+02,	"182", "%2.f",
-__LINE__, 1.817097386762552e-13,	"2E-13", "%3.1G",
-__LINE__, 1.817881381387254e+06,	"1.81788E+06", "%G",
-__LINE__, 1.818416380830953e-30,	"1.81842E-30", "%G",
-__LINE__, 1.824788290177454e-23,	"1.82479e-23", "%g",
-__LINE__, 1.827832506678437e-18,	"1.82783E-18", "%G",
-__LINE__, 1.828048053242609e+01,	"18.2805", "%g",
-__LINE__, 1.828939681844203e-21,	"1.82894E-21", "%.6G",
-__LINE__, 1.829763900251753e+12,	"1829763900251.752773", "%1f",
-__LINE__, 1.833100407114602e-05,	"0.000018", "%#f",
-__LINE__, 1.833672780034284e-07,	"1.833673e-07", "%e",
-__LINE__, 1.834307692387540e+21,	"2E+21", "%5.G",
-__LINE__, 1.835119931666753e+14,	"+1.835120e+14", "%+e",
-__LINE__, 1.835956566920861e-26,	"0.000000", "%#f",
-__LINE__, 1.837784131899354e+22,	"1.83778E+22", "%G",
-__LINE__, 1.842867094224664e-09,	"1.84287e-09", "%g",
-__LINE__, 1.844234823805319e+28,	"2E+28", "%1.G",
-__LINE__, 1.844877682008962e+12,	"1.84488e+12", "%g",
-__LINE__, 1.846530424340488e-22,	"1.846530e-22", "%#.7g",
-__LINE__, 1.849111603036448e-08,	"0.00", "%.2f",
-__LINE__, 1.850158752678734e+04,	"+18502", "%+.5G",
-__LINE__, 1.851431391104701e-06,	" +2e-06", "%+7.e",
-__LINE__, 1.851487430609031e-04,	"0.000185149", "%G",
-__LINE__, 1.853171650128773e+03,	"1853.17", "%G",
-__LINE__, 1.854743263740068e-16,	"1.854743E-16", "%6.6E",
-__LINE__, 1.864399020932753e-11,	"+0.000000", "%+f",
-__LINE__, 1.865028568072397e-22,	"1.86503E-22", "%.6G",
-__LINE__, 1.868128423759223e+14,	"1.86813E+14", "%4G",
-__LINE__, 1.868453558435480e+21,	"1.86845E+21", "%G",
-__LINE__, 1.870663011627498e-06,	"1.87E-06", "%.3G",
-__LINE__, 1.873273487748907e+17,	"+1.873273E+17", "%+E",
-__LINE__, 1.878885220839805e-04,	"0.000187889", "%G",
-__LINE__, 1.879102515623569e+17,	"1.8791e+17", "%g",
-__LINE__, 1.889343972100858e-10,	"2E-10", "%2.E",
-__LINE__, 1.891833282879762e-24,	"+2e-24", "%+.1g",
-__LINE__, 1.895148778941240e-07,	"0.000000", "%0f",
-__LINE__, 1.896950834067578e-28,	"+1.89695e-28", "%+#g",
-__LINE__, 1.898464546986629e-05,	"1.898465e-05", "%.7g",
-__LINE__, 1.900851427578321e-19,	"1.90085e-19", "%6g",
-__LINE__, 1.901171344577750e+27,	"1.901171e+27", "%7.7g",
-__LINE__, 1.903563335316359e+02,	"190.356", "%0g",
-__LINE__, 1.903817306004701e-16,	"+1.90e-16", "%+#6.2e",
-__LINE__, 1.910606410246797e+21,	"1.91061E+21", "%2.5E",
-__LINE__, 1.912537759564710e+29,	"1.91254E+29", "%G",
-__LINE__, 1.913606675894566e+27,	"1.91361E+27", "%7.6G",
-__LINE__, 1.916473734025505e-05,	"  2e-05", "%7.g",
-__LINE__, 1.916507511720523e+23,	"+2E+23", "%+.0E",
-__LINE__, 1.917688262248837e-28,	"1.918e-28", "%.4g",
-__LINE__, 1.921375594217083e-12,	"1.92138E-12", "%G",
-__LINE__, 1.923916000932815e-25,	"1.92392E-25", "%G",
-__LINE__, 1.926303652776462e-01,	"+0.2", "%+0.G",
-__LINE__, 1.929411084211293e+21,	"1.92941E+21", "%6G",
-__LINE__, 1.929996820297491e-26,	"1.93e-26", "%.6g",
-__LINE__, 1.937301472034748e-29,	"1.9373E-29", "%G",
-__LINE__, 1.937301660220894e-11,	"+1.9373E-11", "%+G",
-__LINE__, 1.939038538587083e-02,	"0.0193904", "%g",
-__LINE__, 1.940575489112444e-09,	"1.94058E-09", "%G",
-__LINE__, 1.946550455606677e-26,	"1.946550E-26", "%#1E",
-__LINE__, 1.954250777559491e-14,	"1.95425E-14", "%G",
-__LINE__, 1.955646327688473e-16,	"1.956E-16", "%#.3E",
-__LINE__, 1.956999911995683e+20,	"2E+20", "%2.G",
-__LINE__, 1.959125254298784e-21,	"1.95913E-21", "%#G",
-__LINE__, 1.960330340481290e+26,	"1.96033e+26", "%.6g",
-__LINE__, 1.964156478075422e+01,	"+19.6416", "%+g",
-__LINE__, 1.964702507676036e+19,	"2.0e+19", "%2.1e",
-__LINE__, 1.965762191674409e-30,	"2E-30", "%1.G",
-__LINE__, 1.967492699686803e-29,	"+1.967493E-29", "%+#E",
-__LINE__, 1.970072604062236e-11,	"+1.97007E-11", "%+G",
-__LINE__, 1.975631055550387e+05,	"197563.105555", "%.6f",
-__LINE__, 1.975722425389177e+28,	"+1.975722e+28", "%+5.6e",
-__LINE__, 1.977938328895365e-05,	" 2e-05", "%6.e",
-__LINE__, 1.981950849019640e+13,	"1.981951E+13", "%E",
-__LINE__, 1.982543168856985e-26,	"1.98254e-26", "%4g",
-__LINE__, 1.984873317384181e-20,	"1.98487E-20", "%4G",
-__LINE__, 1.986146420877074e+02,	"+1.986146e+02", "%+0e",
-__LINE__, 1.986465942785167e-28,	"1.98647e-28", "%g",
-__LINE__, 1.988250323235468e-05,	"     +0", "%+7.f",
-__LINE__, 1.989966623080645e-09,	"1.989967e-09", "%e",
-__LINE__, 1.991243122514519e+11,	"199124312251", "%5.f",
-__LINE__, 1.993287894645908e+25,	"+1.993288E+25", "%+E",
-__LINE__, 1.995172329888890e-30,	"+1.99517e-30", "%+3g",
-__LINE__, 1.997075127236432e+05,	"1.997E+05", "%#.4G",
-__LINE__, 2.000651599487290e+04,	"2E+04", "%2.E",
-__LINE__, 2.001429412876339e-28,	"0.000000", "%6f",
-__LINE__, 2.003535646264196e+03,	"  2E+03", "%7.G",
-__LINE__, 2.011751504116246e+06,	"2E+06", "%2.G",
-__LINE__, 2.016361237694652e-30,	"2.01636e-30", "%4g",
-__LINE__, 2.018266414065554e-08,	"0.00", "%2.2f",
-__LINE__, 2.020706780608565e+03,	"2E+03", "%.0G",
-__LINE__, 2.025098418552005e-16,	"+2.025098E-16", "%+2E",
-__LINE__, 2.026100592518976e-11,	"2.026101e-11", "%6e",
-__LINE__, 2.026167291572980e+11,	"2.02617E+11", "%G",
-__LINE__, 2.026782170272331e+07,	"2.026782E+07", "%E",
-__LINE__, 2.029133469449347e-06,	" 2e-06", "%6.g",
-__LINE__, 2.031191570768443e-20,	"2.031192E-20", "%2.7G",
-__LINE__, 2.031884221862863e-16,	"2.031884e-16", "%e",
-__LINE__, 2.032992924118323e+29,	"203299292411832333016263874014.84", "%#0.2f",
-__LINE__, 2.035799610097827e+28,	"+20357996100978272835391180706.2104344", "%+3.7f",
-__LINE__, 2.038008183612069e+25,	"20380081836120691463065668", "%7.0f",
-__LINE__, 2.041632205119365e-22,	"+2.04163e-22", "%+g",
-__LINE__, 2.042769811159352e-10,	"2e-10", "%.1g",
-__LINE__, 2.043034975847005e-08,	"2.043035e-08", "%e",
-__LINE__, 2.045930666285880e+26,	"2.04593e+26", "%g",
-__LINE__, 2.048377276651386e-21,	"0.00000", "%2.5f",
-__LINE__, 2.051785787301292e-23,	"0.000000", "%f",
-__LINE__, 2.055085792048183e-10,	"0.000000", "%f",
-__LINE__, 2.055783028451040e-21,	"+0", "%+1.f",
-__LINE__, 2.057641607509489e-17,	"+2E-17", "%+2.G",
-__LINE__, 2.058348703001600e-15,	"2.05835E-15", "%#G",
-__LINE__, 2.059594758787322e+24,	"2.05959E+24", "%1G",
-__LINE__, 2.062710740295018e+01,	"20.6271", "%G",
-__LINE__, 2.063240676447750e-11,	"0.000000", "%f",
-__LINE__, 2.063799238238917e-09,	"+0.000000", "%+f",
-__LINE__, 2.064564135160425e-17,	"2.06456E-17", "%G",
-__LINE__, 2.066363476927650e-05,	"2.07E-05", "%.3G",
-__LINE__, 2.066871450514214e-02,	"+2.066871e-02", "%+e",
-__LINE__, 2.067258256169148e+07,	"2.06726e+07", "%g",
-__LINE__, 2.068466590729350e-22,	"0.0000", "%.4f",
-__LINE__, 2.068779510112540e-26,	"2.06878e-26", "%g",
-__LINE__, 2.069258770387493e+19,	"20692587703874929516.700831", "%3f",
-__LINE__, 2.069547778447951e+26,	"2.069548e+26", "%6e",
-__LINE__, 2.070479507710941e-23,	"2.07048E-23", "%G",
-__LINE__, 2.071809640061785e+22,	"2.071810E+22", "%E",
-__LINE__, 2.073364463564950e-06,	"2.07336e-06", "%g",
-__LINE__, 2.073478953644888e-10,	"+2.07E-10", "%+.3G",
-__LINE__, 2.076039194312519e+12,	"2.07604E+12", "%G",
-__LINE__, 2.081490398946229e-07,	"+2.08149e-07", "%+g",
-__LINE__, 2.084941170287895e-07,	"2.084941E-07", "%7E",
-__LINE__, 2.087035885023382e-18,	"+0.000000", "%+f",
-__LINE__, 2.091025884363342e-09,	"2.09103E-09", "%G",
-__LINE__, 2.091830555397864e+08,	"209183056", "%0.f",
-__LINE__, 2.091998109232084e-22,	"0.000000", "%#f",
-__LINE__, 2.093406473464940e-17,	"2.09341e-17", "%g",
-__LINE__, 2.094646724039720e-26,	"2.094647e-26", "%0.7g",
-__LINE__, 2.095218667083208e-22,	"2.09522e-22", "%.5e",
-__LINE__, 2.096932364992728e-27,	"2.1E-27", "%.2G",
-__LINE__, 2.097012452732083e+17,	"2.09701E+17", "%G",
-__LINE__, 2.102022216908102e-07,	"0.000000", "%f",
-__LINE__, 2.104648382618938e-04,	"0.00021", "%.3G",
-__LINE__, 2.109159578853690e-19,	"2.10916e-19", "%6g",
-__LINE__, 2.111732624641178e-13,	"+2.111733E-13", "%+7.7G",
-__LINE__, 2.112676138351330e+21,	" 2e+21", "%6.g",
-__LINE__, 2.117332904051741e-09,	"+0.000000", "%+f",
-__LINE__, 2.118001353767757e-14,	"2.118E-14", "%4.3E",
-__LINE__, 2.119413720893955e+12,	"2.119414E+12", "%.7G",
-__LINE__, 2.119610992647014e+07,	"+21196109.9265", "%+.4f",
-__LINE__, 2.120504022069221e+25,	"21205040220692210617414730.223", "%#.3f",
-__LINE__, 2.120634617123718e-16,	"2.120635e-16", "%#e",
-__LINE__, 2.128702437175385e+12,	"2128702437175.385", "%.3f",
-__LINE__, 2.131148830213536e-12,	"2.131149e-12", "%e",
-__LINE__, 2.132682622145255e+04,	"+21326.83", "%+#5.7G",
-__LINE__, 2.133864841676473e-01,	"  +0.2", "%+6.g",
-__LINE__, 2.133939058496273e+16,	"2E+16", "%4.G",
-__LINE__, 2.135087006806302e-24,	"0.000000", "%f",
-__LINE__, 2.138983961194584e-20,	"+2.138984e-20", "%+7e",
-__LINE__, 2.146534189669224e+17,	"+2.147E+17", "%+.4G",
-__LINE__, 2.147375595676503e+09,	"2.147376e+09", "%e",
-__LINE__, 2.152994986418075e+02,	"2E+02", "%0.E",
-__LINE__, 2.154127135896811e+06,	"2.15E+06", "%2.3G",
-__LINE__, 2.154613053892588e-29,	"2.1546E-29", "%.4E",
-__LINE__, 2.160830430730653e-12,	"2.16083E-12", "%#G",
-__LINE__, 2.161740591663027e+28,	"2.161741e+28", "%e",
-__LINE__, 2.167181665934011e-06,	"2e-06", "%1.e",
-__LINE__, 2.167348761729060e-04,	"2.167349e-04", "%#e",
-__LINE__, 2.170270852816708e-10,	"2.17027E-10", "%0G",
-__LINE__, 2.173048229189370e-06,	"2.173e-06", "%.5g",
-__LINE__, 2.175554537855024e+10,	"2.17555E+10", "%G",
-__LINE__, 2.177447372527968e-30,	"+0.000000", "%+.6f",
-__LINE__, 2.178591661569858e+05,	"2.1786e+05", "%1.5g",
-__LINE__, 2.184700207174818e-29,	"0.000000", "%f",
-__LINE__, 2.190817031437247e+03,	"2.E+03", "%#3.0E",
-__LINE__, 2.191396212145558e-01,	"2.191E-01", "%6.3E",
-__LINE__, 2.191786353372880e-23,	"2.19179e-23", "%.5e",
-__LINE__, 2.193471126151079e+19,	"2.1935E+19", "%.4E",
-__LINE__, 2.194750177630526e-15,	"2.194750e-15", "%e",
-__LINE__, 2.196145170358973e+05,	"+219615", "%+g",
-__LINE__, 2.199602360934320e-09,	"2.19960E-09", "%#6.6G",
-__LINE__, 2.202913988776998e+17,	"+2.20291e+17", "%+g",
-__LINE__, 2.207094560707703e-10,	"2.207095e-10", "%e",
-__LINE__, 2.207557214621658e-13,	"   0", "%4.f",
-__LINE__, 2.209428206272229e+13,	"2.20943e+13", "%g",
-__LINE__, 2.212662463615175e-11,	"   0", "%4.0f",
-__LINE__, 2.215732710968468e-30,	"2E-30", "%.1G",
-__LINE__, 2.218490841936778e-10,	"2.21849e-10", "%2g",
-__LINE__, 2.218850610567959e-01,	"+0.221885", "%+G",
-__LINE__, 2.220796939261542e-03,	"0.002221", "%#f",
-__LINE__, 2.221819894808024e+24,	"2.2e+24", "%5.1e",
-__LINE__, 2.223804993235507e+27,	"2.223805e+27", "%1e",
-__LINE__, 2.224715386046563e-17,	"0.00000", "%#.5f",
-__LINE__, 2.224864709983882e-16,	"+2.224865e-16", "%+e",
-__LINE__, 2.225764510969505e+16,	"2.E+16", "%#4.G",
-__LINE__, 2.233229189161284e-07,	"+2.23323e-07", "%+6g",
-__LINE__, 2.236522807209868e+17,	"2.23652e+17", "%g",
-__LINE__, 2.236641620849775e+20,	"2E+20", "%0.G",
-__LINE__, 2.237089952728626e-13,	"2E-13", "%5.E",
-__LINE__, 2.238531255563381e-11,	"  2E-11", "%7.1G",
-__LINE__, 2.242782296436871e+12,	"2242782296436.871103", "%f",
-__LINE__, 2.249177852069393e-02,	"+2.249178E-02", "%+5E",
-__LINE__, 2.250735782732076e+29,	"+2.25074e+29", "%+g",
-__LINE__, 2.257455203557544e-11,	"+2e-11", "%+4.0g",
-__LINE__, 2.258002527939529e+24,	"2.258e+24", "%g",
-__LINE__, 2.266955929448160e+20,	"226695592944815960123.6056915", "%.7f",
-__LINE__, 2.269019719123250e-23,	"0.000000", "%f",
-__LINE__, 2.269022332502809e+02,	"+226.902233", "%+f",
-__LINE__, 2.271165222038591e-03,	"0.002", "%1.1g",
-__LINE__, 2.273965946408021e+14,	"+227396594640802.085507", "%+f",
-__LINE__, 2.277221153386242e+22,	"22772211533862418697538.032575", "%#f",
-__LINE__, 2.280214920187521e-01,	"0.2", "%2.G",
-__LINE__, 2.280762993019740e+06,	"2.28076E+06", "%G",
-__LINE__, 2.283479263040833e-24,	"+0.000000", "%+f",
-__LINE__, 2.283686319235123e-07,	"2.2837E-07", "%5.5G",
-__LINE__, 2.285842617231066e-26,	"0.000000", "%f",
-__LINE__, 2.293145864755873e-02,	"0.02", "%.0g",
-__LINE__, 2.293439381531532e+03,	"+2.293439E+03", "%+#1E",
-__LINE__, 2.297972500660698e-22,	"2.29797e-22", "%g",
-__LINE__, 2.298725366073681e+23,	"2.29873E+23", "%G",
-__LINE__, 2.303151535483950e-29,	"2.30315E-29", "%G",
-__LINE__, 2.308565313657699e-25,	"   0", "%4.f",
-__LINE__, 2.309305373760733e-07,	"2.309305E-07", "%E",
-__LINE__, 2.309693761334710e-19,	"2.30969e-19", "%g",
-__LINE__, 2.312218220995774e-20,	"+2.31222E-20", "%+.6G",
-__LINE__, 2.313115729670525e+24,	"2.31312E+24", "%G",
-__LINE__, 2.315325159866773e-21,	"2.315325E-21", "%E",
-__LINE__, 2.316932917620091e-19,	"0.000000", "%f",
-__LINE__, 2.317548394633895e+13,	"2.31755E+13", "%0G",
-__LINE__, 2.318951465093612e+02,	"+2.32e+02", "%+1.2e",
-__LINE__, 2.319151794905482e-17,	"+0.000000", "%+0f",
-__LINE__, 2.319708617851078e-27,	"0.000000", "%f",
-__LINE__, 2.320019976591725e+20,	"2e+20", "%.1g",
-__LINE__, 2.322859962551666e+06,	"2.32286e+06", "%g",
-__LINE__, 2.326474568074649e-29,	"2.326e-29", "%.4g",
-__LINE__, 2.328400844172053e-07,	"2.3284E-07", "%G",
-__LINE__, 2.333695247698112e+16,	"2.3337e+16", "%g",
-__LINE__, 2.333717120257130e-19,	"+0.000000", "%+f",
-__LINE__, 2.334711793234782e-19,	"2.33471E-19", "%5G",
-__LINE__, 2.335524987281242e+02,	"+233.55", "%+7.5g",
-__LINE__, 2.335556767836369e-30,	"2.34e-30", "%.3g",
-__LINE__, 2.337696964360052e-10,	"2.3377e-10", "%1g",
-__LINE__, 2.337858249184500e-14,	"2.337858E-14", "%5.6E",
-__LINE__, 2.339984354781169e-14,	"2.339984E-14", "%E",
-__LINE__, 2.340849041430089e-04,	"0.00023", "%0.2G",
-__LINE__, 2.342388410373363e-24,	"2.34239E-24", "%G",
-__LINE__, 2.343933106737237e-22,	"2.34393e-22", "%g",
-__LINE__, 2.344870855713960e-08,	"0.000000", "%.6f",
-__LINE__, 2.347368965433808e+24,	"2347368965433808352116785", "%4.f",
-__LINE__, 2.349417462171421e-02,	"+0.0234942", "%+G",
-__LINE__, 2.351071111431207e+11,	"235107111143.12", "%.2f",
-__LINE__, 2.352756222810670e+19,	"+2.e+19", "%+#4.g",
-__LINE__, 2.355862529217003e-22,	"2.355863e-22", "%#4e",
-__LINE__, 2.356804045401445e-30,	"2.3568E-30", "%G",
-__LINE__, 2.362100710185559e-26,	"2.3621e-26", "%g",
-__LINE__, 2.368330779173562e-12,	"   0", "%4.f",
-__LINE__, 2.383329784369796e+22,	"2.38333E+22", "%G",
-__LINE__, 2.386845229536477e+01,	"+23.868452", "%+#f",
-__LINE__, 2.388207830036780e-05,	"0.000024", "%f",
-__LINE__, 2.391809468802907e+21,	"+2.391809e+21", "%+e",
-__LINE__, 2.395172908564692e-09,	"+0.000000", "%+f",
-__LINE__, 2.395447167030886e-29,	"2.39545e-29", "%g",
-__LINE__, 2.397292973389182e+16,	"23972929733891823", "%6.f",
-__LINE__, 2.401749832237687e-30,	"2.401750E-30", "%E",
-__LINE__, 2.403610502544347e-03,	"0.00240361", "%4G",
-__LINE__, 2.404676421776132e+17,	"240467642177613206", "%6.f",
-__LINE__, 2.406327689091479e+25,	"2.406328e+25", "%e",
-__LINE__, 2.407341999590511e-02,	"0.024073", "%f",
-__LINE__, 2.407352797581004e+05,	"240735.", "%#g",
-__LINE__, 2.407903467439017e+13,	"2.4079E+13", "%G",
-__LINE__, 2.407979635013539e+21,	" +2E+21", "%+7.G",
-__LINE__, 2.409513517930790e+29,	"240951351793079027174826478585.600853", "%f",
-__LINE__, 2.412530651221551e+10,	"+2.41253E+10", "%+G",
-__LINE__, 2.419943224673811e+00,	"2.41994", "%#g",
-__LINE__, 2.422474399040258e-15,	"0.000000", "%f",
-__LINE__, 2.426060206689458e+18,	"2.42606E+18", "%1G",
-__LINE__, 2.439982659679872e+14,	"+2.439983E+14", "%+E",
-__LINE__, 2.440528851375447e+13,	"24405288513754.466173", "%f",
-__LINE__, 2.441340473292679e+19,	"2.44134E+19", "%G",
-__LINE__, 2.443521636943916e+19,	" 2.e+19", "%#7.g",
-__LINE__, 2.445925211597624e-27,	"2.445925E-27", "%E",
-__LINE__, 2.446966179060722e+25,	"2.446966e+25", "%5e",
-__LINE__, 2.447714218717278e+11,	"2e+11", "%1.e",
-__LINE__, 2.448339744613286e+06,	"2.4483e+06", "%3.5g",
-__LINE__, 2.448772993496189e+03,	"2448.77", "%G",
-__LINE__, 2.448857654325229e+22,	"+2.44886e+22", "%+g",
-__LINE__, 2.450082452098890e-27,	"2.4501E-27", "%#3.5G",
-__LINE__, 2.451293602221637e+05,	"245129.360222", "%f",
-__LINE__, 2.454531490229426e+02,	"245.453", "%G",
-__LINE__, 2.458958369944980e+14,	"2.5E+14", "%6.1E",
-__LINE__, 2.463666680775038e+14,	"+246366668077503.80", "%+#.2f",
-__LINE__, 2.471582990960795e+05,	"2.471583e+05", "%e",
-__LINE__, 2.474107179274687e+22,	"2.47411e+22", "%g",
-__LINE__, 2.474332114849132e-08,	"+2.47433e-08", "%+g",
-__LINE__, 2.476956762431716e+18,	"+2476956762431715919.348107", "%+#f",
-__LINE__, 2.479091221850607e-22,	"0.000000", "%f",
-__LINE__, 2.479819586598431e-24,	"2.47982e-24", "%g",
-__LINE__, 2.480006174601455e-05,	"2.48001E-05", "%G",
-__LINE__, 2.482672677638334e-26,	"+0.000000", "%+f",
-__LINE__, 2.492816492208918e-14,	"      0", "%7.f",
-__LINE__, 2.492964173197140e-12,	"  2e-12", "%7.g",
-__LINE__, 2.494646635961173e+02,	"249.465", "%g",
-__LINE__, 2.494687818780545e+11,	"249468781878.054546", "%#7f",
-__LINE__, 2.510083560147301e-13,	"+2.510084e-13", "%+#e",
-__LINE__, 2.511186607989480e-30,	"2.51E-30", "%.3G",
-__LINE__, 2.514164516133643e-11,	"2.51416e-11", "%g",
-__LINE__, 2.517242520804735e+11,	"2.517243e+11", "%e",
-__LINE__, 2.518526126400833e-26,	"2.51853e-26", "%g",
-__LINE__, 2.520313416401176e+09,	"2520313416.401176", "%5f",
-__LINE__, 2.521653160738683e-29,	"2.52165e-29", "%#g",
-__LINE__, 2.521941342615338e-16,	"2.52194e-16", "%g",
-__LINE__, 2.523554774354461e-03,	"+3E-03", "%+.0E",
-__LINE__, 2.525434130825058e+06,	"+2.525434E+06", "%+E",
-__LINE__, 2.527616380113364e+02,	"2.527616E+02", "%E",
-__LINE__, 2.531871347913505e+09,	"+2.53187E+09", "%+#G",
-__LINE__, 2.532167428661069e+06,	"2532167.428661", "%f",
-__LINE__, 2.545585718405995e+14,	"+2.54559E+14", "%+G",
-__LINE__, 2.546305097286406e+10,	"2.546305e+10", "%e",
-__LINE__, 2.547467156069069e-30,	"+0.00", "%+3.2f",
-__LINE__, 2.548728793004506e-14,	"2.54873E-14", "%G",
-__LINE__, 2.560375602395090e+11,	"256037560239.509032", "%0f",
-__LINE__, 2.560555687476687e+03,	"2561", "%.4g",
-__LINE__, 2.561709077363443e-24,	"+0.000000", "%+f",
-__LINE__, 2.563763849675242e+10,	"2.5637638E+10", "%.7E",
-__LINE__, 2.567482414574355e+11,	"+2.567482e+11", "%+e",
-__LINE__, 2.571575046303674e-17,	"3E-17", "%2.0E",
-__LINE__, 2.572997971296986e+11,	"257299797129.698593", "%f",
-__LINE__, 2.578625935900331e+22,	"25786259359003311786295.853381", "%f",
-__LINE__, 2.579663282966370e+12,	"2.579663e+12", "%e",
-__LINE__, 2.593141782397610e-08,	"0.000000", "%f",
-__LINE__, 2.594386109584196e+04,	"3.E+04", "%#6.0E",
-__LINE__, 2.598069318007816e-22,	"2.59807e-22", "%g",
-__LINE__, 2.600910462290091e+09,	"2.600910E+09", "%6E",
-__LINE__, 2.602580183614458e-03,	"2.602580e-03", "%e",
-__LINE__, 2.606540360440264e+09,	"+2606540360.4", "%+#0.1f",
-__LINE__, 2.610016419698116e-21,	"+3.e-21", "%+#3.g",
-__LINE__, 2.612279323574882e-20,	"2.61228E-20", "%G",
-__LINE__, 2.614157324336453e-14,	"2.61416e-14", "%g",
-__LINE__, 2.614688721873993e-09,	"2.61e-09", "%6.2e",
-__LINE__, 2.616661104472416e-15,	"    0", "%5.f",
-__LINE__, 2.616742079283195e-09,	" +3E-09", "%+7.E",
-__LINE__, 2.618075304717427e+24,	"2.618075e+24", "%e",
-__LINE__, 2.624118573335769e+26,	"262411857333576925555007619.550452", "%1f",
-__LINE__, 2.625718894274227e+24,	"+2625718894274227110940955.753904", "%+f",
-__LINE__, 2.627081999477812e+03,	"2627.081999", "%f",
-__LINE__, 2.631061062224705e+14,	"263106106222470.481626", "%f",
-__LINE__, 2.631545877128814e+27,	"+2.63155e+27", "%+g",
-__LINE__, 2.632694395848818e-11,	"2.63269e-11", "%g",
-__LINE__, 2.636728891022008e-22,	"+2.63673e-22", "%+#4g",
-__LINE__, 2.638495675008130e-28,	"+2.638496e-28", "%+e",
-__LINE__, 2.639704195859799e-11,	"0.", "%#.0f",
-__LINE__, 2.641645264652665e-20,	"0", "%0.f",
-__LINE__, 2.642012075064497e-20,	"3E-20", "%0.E",
-__LINE__, 2.648725869006487e-29,	" 3E-29", "%6.G",
-__LINE__, 2.649060724417770e+12,	"3E+12", "%3.G",
-__LINE__, 2.651188545120166e-17,	"0.000", "%.3f",
-__LINE__, 2.652302152621621e+14,	"2.7E+14", "%.2G",
-__LINE__, 2.653309718412604e-28,	"0.000000", "%f",
-__LINE__, 2.658344750491858e-21,	" 3e-21", "%6.g",
-__LINE__, 2.664625074612594e+15,	"3e+15", "%1.g",
-__LINE__, 2.666953728270800e-15,	"3e-15", "%0.e",
-__LINE__, 2.674515419678877e-11,	" 3E-11", "%6.E",
-__LINE__, 2.680054917256578e+15,	"2680054917256577.5", "%#2.1f",
-__LINE__, 2.680495609883415e-11,	"2.68E-11", "%#.3G",
-__LINE__, 2.685757893641070e+23,	"268575789364107020418259.70809", "%1.5f",
-__LINE__, 2.695551226058178e+16,	"26955512260581775.407786", "%f",
-__LINE__, 2.696346377519671e+04,	"+26963.5", "%+G",
-__LINE__, 2.714262310601257e+17,	"+2.714262E+17", "%+E",
-__LINE__, 2.719227450016317e-01,	"0.271923", "%G",
-__LINE__, 2.724135433346056e-30,	"+2.72414e-30", "%+g",
-__LINE__, 2.725143224130276e+14,	"272514322413027.576530", "%6f",
-__LINE__, 2.729355189648310e-03,	"+0.00273", "%+.5f",
-__LINE__, 2.732872167724945e+11,	"2.73287E+11", "%G",
-__LINE__, 2.737709476435412e+17,	"273770947643541218.141650", "%f",
-__LINE__, 2.739299356074967e-15,	"2.7E-15", "%.2G",
-__LINE__, 2.740793612304798e-27,	"2.740794E-27", "%.7G",
-__LINE__, 2.742030156175960e+20,	"2.74203e+20", "%2.6g",
-__LINE__, 2.744455324096085e+11,	"2.74446E+11", "%G",
-__LINE__, 2.745179546531160e+07,	"2.7452E+07", "%.5G",
-__LINE__, 2.747470562525333e+04,	"3E+04", "%2.E",
-__LINE__, 2.750243314674629e+21,	"2.75024E+21", "%#G",
-__LINE__, 2.750250224436030e+20,	"+2.750250e+20", "%+0.6e",
-__LINE__, 2.752712858561084e-22,	"2.752713e-22", "%e",
-__LINE__, 2.756982987656667e-03,	"0.002756983", "%#.7G",
-__LINE__, 2.761841188479590e+13,	"3e+13", "%1.g",
-__LINE__, 2.769498440434419e+00,	"+3e+00", "%+0.e",
-__LINE__, 2.769993785786379e+10,	"27699937857.863794", "%f",
-__LINE__, 2.772900256376753e-06,	"+2.7729E-06", "%+7.6G",
-__LINE__, 2.774401482467457e-06,	"2.8e-06", "%3.2g",
-__LINE__, 2.777691370374757e-02,	"+0.027777", "%+f",
-__LINE__, 2.779836227365899e-09,	"3e-09", "%5.0g",
-__LINE__, 2.780481651765741e+01,	"2.780482E+01", "%E",
-__LINE__, 2.782228478714809e-26,	"2.782228E-26", "%4.7G",
-__LINE__, 2.790457781719376e+13,	"+2.8e+13", "%+.2g",
-__LINE__, 2.792026581166417e-30,	" 3.e-30", "%#7.0g",
-__LINE__, 2.792396278299615e-08,	"0.00", "%#.2f",
-__LINE__, 2.793658047689995e-10,	"2.794e-10", "%#0.4g",
-__LINE__, 2.795707358229888e-25,	"0.000000", "%f",
-__LINE__, 2.796253091758523e-06,	"2.796E-06", "%.4G",
-__LINE__, 2.796756564788716e-24,	"2.796757e-24", "%e",
-__LINE__, 2.798730444798773e-14,	"2.79873e-14", "%g",
-__LINE__, 2.799108397670447e-24,	"3E-24", "%.0G",
-__LINE__, 2.799389008872835e+06,	"2799389.", "%#0.f",
-__LINE__, 2.800413998518039e-14,	"0.000000", "%f",
-__LINE__, 2.803237602587100e+15,	"+2803237602587100.418816", "%+5f",
-__LINE__, 2.803474415574551e-04,	"0.0002803", "%.7f",
-__LINE__, 2.804957468647181e+25,	"2.80496e+25", "%g",
-__LINE__, 2.809345112788226e+09,	"2809345112.788226", "%.6f",
-__LINE__, 2.811518239408899e+10,	"3e+10", "%1.g",
-__LINE__, 2.813188439967416e-16,	"0.0000000", "%5.7f",
-__LINE__, 2.813497118051755e+08,	"2.8135e+08", "%.5g",
-__LINE__, 2.815748256510577e-29,	"0.000000", "%2f",
-__LINE__, 2.816076365485207e-01,	"0.281608", "%0G",
-__LINE__, 2.816083345772131e+24,	"2.8161e+24", "%6.4e",
-__LINE__, 2.818686957605178e+12,	"2.8187E+12", "%.5G",
-__LINE__, 2.821903538737691e+20,	"2.8219E+20", "%G",
-__LINE__, 2.823659589845680e+26,	"2.82366e+26", "%2g",
-__LINE__, 2.823685630865012e+22,	"2.82369E+22", "%G",
-__LINE__, 2.828826386007914e+21,	"2.828826E+21", "%7E",
-__LINE__, 2.830997901034349e+04,	"+3e+04", "%+0.e",
-__LINE__, 2.833886731091353e-26,	"+2.833887e-26", "%+4e",
-__LINE__, 2.839965144893913e+28,	"28399651448939131626048038015.1421", "%.4f",
-__LINE__, 2.840651452049947e-09,	"2.841E-09", "%#.3E",
-__LINE__, 2.843388001911757e-01,	"0.284339", "%g",
-__LINE__, 2.846122151080671e+14,	"2.84612E+14", "%.5E",
-__LINE__, 2.851257828837595e+05,	"+285126", "%+5.f",
-__LINE__, 2.853823884459520e+07,	"+2.85382E+07", "%+G",
-__LINE__, 2.853870068368765e-06,	"2.854E-06", "%4.3E",
-__LINE__, 2.856687358149867e+01,	"+28.567", "%+6.5G",
-__LINE__, 2.858946600073752e+06,	"2.8589466e+06", "%3.7e",
-__LINE__, 2.861525727138818e+24,	"2.8615257e+24", "%2.7e",
-__LINE__, 2.865104175886071e-24,	"0.000000", "%f",
-__LINE__, 2.870678920363198e-14,	"2.87068E-14", "%G",
-__LINE__, 2.873298537233691e+09,	"+2.8733e+09", "%+g",
-__LINE__, 2.877939609444375e-02,	"0.028779", "%f",
-__LINE__, 2.878253985341728e+13,	"2.87825E+13", "%G",
-__LINE__, 2.879299244903946e+29,	"287929924490394597569320467301", "%0.f",
-__LINE__, 2.885516225515485e-26,	"0.000000", "%f",
-__LINE__, 2.886013724129579e+20,	"+3e+20", "%+4.g",
-__LINE__, 2.887032786975506e-30,	"0.000000", "%f",
-__LINE__, 2.890415456531026e-29,	"2.89042E-29", "%G",
-__LINE__, 2.893177360548214e-13,	"2.893E-13", "%#6.3E",
-__LINE__, 2.895265536458195e+26,	"2.89527e+26", "%5g",
-__LINE__, 2.903844533810152e+23,	"290384453381015195105874.23", "%.2f",
-__LINE__, 2.909060558287504e+27,	"2.90906e+27", "%g",
-__LINE__, 2.911615480973172e-05,	"2.91162E-05", "%3G",
-__LINE__, 2.912692297221896e+09,	"2912692297.221896", "%#f",
-__LINE__, 2.913595662485813e-24,	"2.9136E-24", "%G",
-__LINE__, 2.915960840341896e-27,	"0.000000", "%f",
-__LINE__, 2.920451095973991e-16,	"2.92e-16", "%2.2e",
-__LINE__, 2.920528295810925e+06,	"2.92053E+06", "%#G",
-__LINE__, 2.921564671017147e+20,	"2.921565E+20", "%#6E",
-__LINE__, 2.921628350942189e+01,	"2.921628E+01", "%E",
-__LINE__, 2.921843377455232e+20,	"2.921843E+20", "%#E",
-__LINE__, 2.930156950319384e+29,	"2.930E+29", "%1.3E",
-__LINE__, 2.931229858895071e-30,	"2.9e-30", "%4.2g",
-__LINE__, 2.931753029689166e+20,	"2.93175e+20", "%g",
-__LINE__, 2.933023693079342e+15,	"3.E+15", "%#.1G",
-__LINE__, 2.933078733225520e+26,	"2.93308E+26", "%G",
-__LINE__, 2.933528170896643e-14,	"+2.93353e-14", "%+g",
-__LINE__, 2.938648437428148e+00,	"2.938648e+00", "%e",
-__LINE__, 2.940752238221344e+26,	"+2.94075E+26", "%+G",
-__LINE__, 2.942836470459675e+20,	"2.9428e+20", "%6.4e",
-__LINE__, 2.943218333254941e+29,	"294321833325494086608387078740.634024", "%f",
-__LINE__, 2.943690574007512e-27,	"0.000000", "%f",
-__LINE__, 2.945452907046501e+09,	"+2.9455E+09", "%+.5G",
-__LINE__, 2.946648725966953e+16,	"29466487259669534.637396", "%4f",
-__LINE__, 2.955119322417825e+29,	"2.95512E+29", "%G",
-__LINE__, 2.966481197538973e+24,	"2.96648e+24", "%#g",
-__LINE__, 2.969362862661362e+08,	"+2.969363e+08", "%+7e",
-__LINE__, 2.970062459990078e+21,	"+2.97006E+21", "%+G",
-__LINE__, 2.971059959019791e+10,	"  3E+10", "%7.G",
-__LINE__, 2.973020205606034e-29,	"0.000000", "%f",
-__LINE__, 2.977223210301426e+04,	"2.977223e+04", "%#e",
-__LINE__, 2.977467832772786e-26,	"0.000000", "%f",
-__LINE__, 2.981433606423384e+18,	"2981433606423384397.032805", "%f",
-__LINE__, 2.981615513287404e-17,	"2.98162e-17", "%g",
-__LINE__, 2.983880743847276e+19,	"  3e+19", "%7.e",
-__LINE__, 2.983927792297305e-28,	"2.983928e-28", "%e",
-__LINE__, 2.984807359492058e-17,	" 0", "%2.f",
-__LINE__, 2.985123412933032e+09,	"+2.98512e+09", "%+g",
-__LINE__, 2.991132955408629e-27,	"+2.99113e-27", "%+4g",
-__LINE__, 2.992345635923643e+19,	"3E+19", "%4.G",
-__LINE__, 2.993024238285395e-05,	"2.99302e-05", "%2g",
-__LINE__, 2.995303406756363e+16,	"+2.995303E+16", "%+E",
-__LINE__, 2.995492577854335e+19,	"+29954925778543346481.797016", "%+f",
-__LINE__, 2.996856271675341e-25,	"+3e-25", "%+0.e",
-__LINE__, 2.997813968112619e+12,	"2.99781e+12", "%#5g",
-__LINE__, 3.002097486457961e-17,	"3.00210e-17", "%5.5e",
-__LINE__, 3.006538123158692e+28,	"+3.00654E+28", "%+#G",
-__LINE__, 3.007293721729544e+04,	"30072.937217", "%f",
-__LINE__, 3.008301791944493e-07,	"3.008e-07", "%.3e",
-__LINE__, 3.011742184603817e-17,	"3.011742E-17", "%#E",
-__LINE__, 3.024641547299177e-30,	"3.02464e-30", "%g",
-__LINE__, 3.026525135110198e-28,	"3e-28", "%.0e",
-__LINE__, 3.026768160756558e+20,	"3.02677E+20", "%G",
-__LINE__, 3.031928829940975e+18,	"3031928829940975234.1", "%0.1f",
-__LINE__, 3.039787705138620e+24,	"+3.E+24", "%+#5.G",
-__LINE__, 3.039803824423916e-02,	"0.030398", "%5f",
-__LINE__, 3.041236293199133e-26,	"3.04124e-26", "%g",
-__LINE__, 3.045634954037886e+04,	"30456.3", "%g",
-__LINE__, 3.047528114241850e+25,	"3e+25", "%0.e",
-__LINE__, 3.047958193737501e-24,	"3.04796E-24", "%#G",
-__LINE__, 3.049537324414302e-16,	"3.04954E-16", "%G",
-__LINE__, 3.050500637681798e-30,	"3.0505E-30", "%G",
-__LINE__, 3.051769626625307e-01,	"0.305177", "%f",
-__LINE__, 3.057280201971847e+11,	"+3.05728E+11", "%+.5E",
-__LINE__, 3.060046173306881e-10,	"+3.060046e-10", "%+e",
-__LINE__, 3.069732667347204e+27,	"+3069732667347204291274920251.453295", "%+f",
-__LINE__, 3.075060836786916e-14,	"0.000000", "%f",
-__LINE__, 3.078175179670964e+13,	"3.07818E+13", "%G",
-__LINE__, 3.080305344303183e-21,	"3.08031e-21", "%6g",
-__LINE__, 3.088881497064043e+27,	"+3.088881E+27", "%+3E",
-__LINE__, 3.089196877931209e-20,	"3.089197e-20", "%e",
-__LINE__, 3.091400888880487e-08,	"3e-08", "%2.e",
-__LINE__, 3.093410684178904e+16,	"3.09341e+16", "%g",
-__LINE__, 3.104225344208216e-21,	"0.000000", "%f",
-__LINE__, 3.105843728248599e+13,	"3.e+13", "%#.0g",
-__LINE__, 3.106463071390893e-07,	"0.0000", "%.4f",
-__LINE__, 3.107784123569379e+02,	"+310.778", "%+G",
-__LINE__, 3.110605148983672e-20,	"3.1106051E-20", "%.7E",
-__LINE__, 3.111702418162670e-04,	"0.00031117", "%.5G",
-__LINE__, 3.117610675303153e-17,	"3.11761e-17", "%g",
-__LINE__, 3.123620125717981e+07,	"3.1236e+07", "%2.5g",
-__LINE__, 3.125648558809832e-24,	"+3.125649E-24", "%+#0.6E",
-__LINE__, 3.129025163659283e+10,	"31290251636.592825", "%#f",
-__LINE__, 3.130689119412709e-29,	"+3.131E-29", "%+#.4G",
-__LINE__, 3.135681222132527e+13,	"3.13568E+13", "%G",
-__LINE__, 3.138290485073330e-10,	"3.13829E-10", "%G",
-__LINE__, 3.141255250155306e-12,	"3.14126E-12", "%G",
-__LINE__, 3.143224520918429e+25,	"3.14322E+25", "%#1G",
-__LINE__, 3.144746921366173e-16,	"      0", "%7.f",
-__LINE__, 3.151336678241994e+19,	"+3.15134E+19", "%+G",
-__LINE__, 3.161752935716549e+24,	"3.2E+24", "%2.1E",
-__LINE__, 3.167106521258172e-10,	"+3.167107e-10", "%+e",
-__LINE__, 3.167266522824146e-04,	"3E-04", "%3.E",
-__LINE__, 3.169995217131489e+27,	"3169995217131488907114089670.358226", "%f",
-__LINE__, 3.172117220467692e-21,	"3.1721E-21", "%.5G",
-__LINE__, 3.173824170351611e+02,	" 3e+02", "%6.e",
-__LINE__, 3.186291452544739e-28,	" 0", "%2.f",
-__LINE__, 3.194750094186063e+03,	"+3.194750E+03", "%+E",
-__LINE__, 3.195001037118137e-20,	"0", "%0.0f",
-__LINE__, 3.199271564719560e+02,	"319.927", "%g",
-__LINE__, 3.212803450638544e+20,	"3.2128e+20", "%.6g",
-__LINE__, 3.214502877263883e+24,	"3214502877263882840708220", "%2.f",
-__LINE__, 3.214658414074286e-01,	"+0.321466", "%+#g",
-__LINE__, 3.217627975823673e+00,	"3.217628", "%f",
-__LINE__, 3.218257328710536e-07,	"3.21826e-07", "%6.5e",
-__LINE__, 3.221949479347008e+02,	"322.194948", "%f",
-__LINE__, 3.222862935507443e-14,	"3.222863E-14", "%E",
-__LINE__, 3.223750247261608e+19,	"3.22375e+19", "%g",
-__LINE__, 3.236030335782375e+05,	"3.236030e+05", "%e",
-__LINE__, 3.241078803072735e+19,	"3.24108e+19", "%g",
-__LINE__, 3.248069569167045e-06,	"0.000003", "%#f",
-__LINE__, 3.248148973717269e-15,	"3.24815E-15", "%G",
-__LINE__, 3.251150704311790e+25,	"+3.25115e+25", "%+5g",
-__LINE__, 3.254498593372140e+15,	"+3.2545e+15", "%+g",
-__LINE__, 3.254949399612861e-13,	"+3.255E-13", "%+7.3E",
-__LINE__, 3.255490928554106e-17,	"3.255491e-17", "%e",
-__LINE__, 3.262333894422112e+17,	"326233389442211185.738074", "%0f",
-__LINE__, 3.263923577545217e-24,	"0.0000000", "%.7f",
-__LINE__, 3.267125289609703e+23,	"3.26713e+23", "%#.5e",
-__LINE__, 3.267906049108331e+27,	"3.267906E+27", "%6E",
-__LINE__, 3.269885039157328e+14,	"326988503915732.797722", "%f",
-__LINE__, 3.296011393609953e-27,	"  3E-27", "%7.E",
-__LINE__, 3.296452164568996e+29,	"3.296452E+29", "%E",
-__LINE__, 3.296544736555325e+10,	"+3.29654E+10", "%+.6G",
-__LINE__, 3.301861835798572e+03,	"3301.862", "%4.7g",
-__LINE__, 3.311292283423002e+21,	" 3E+21", "%6.G",
-__LINE__, 3.314868440076262e-10,	"3.3149E-10", "%.5G",
-__LINE__, 3.318057982247451e-13,	"3.3181e-13", "%0.5g",
-__LINE__, 3.318139218410071e-22,	"0.000000", "%f",
-__LINE__, 3.326769904839351e-11,	"+3.3268e-11", "%+0.4e",
-__LINE__, 3.327483659787219e+27,	"+3.32748e+27", "%+g",
-__LINE__, 3.332666889640198e+17,	"333266688964019763.830038", "%f",
-__LINE__, 3.333807449377253e+10,	"+3.33e+10", "%+.3g",
-__LINE__, 3.334572302792625e-09,	"3.334572E-09", "%E",
-__LINE__, 3.337567126586765e-17,	"0.0000000", "%#3.7f",
-__LINE__, 3.340512607683786e-04,	"+3E-04", "%+1.E",
-__LINE__, 3.344911557516870e+04,	"33449.1", "%G",
-__LINE__, 3.346464302017296e+26,	"+3.E+26", "%+#3.G",
-__LINE__, 3.348503166628953e+00,	"+3.348503e+00", "%+e",
-__LINE__, 3.350025157778138e-19,	"3.35003e-19", "%6g",
-__LINE__, 3.352826233035342e+11,	"335282623303.534200", "%7f",
-__LINE__, 3.357174089765502e+10,	"3.35717E+10", "%G",
-__LINE__, 3.369253166475501e+03,	"+3369.25", "%+G",
-__LINE__, 3.371385975046735e+02,	"337.", "%#.0f",
-__LINE__, 3.372532650462104e-04,	"+0.000", "%+.3f",
-__LINE__, 3.376498162710442e-26,	"3.376498e-26", "%e",
-__LINE__, 3.383510307689135e-12,	"  3e-12", "%7.0e",
-__LINE__, 3.388427914080631e-04,	"0.0003", "%2.4f",
-__LINE__, 3.390757423408097e+29,	"3.3908E+29", "%.4E",
-__LINE__, 3.393963140962879e-11,	"3.39396e-11", "%g",
-__LINE__, 3.399245742994444e+24,	"3.399246E+24", "%E",
-__LINE__, 3.417690405546708e-26,	"0.00000", "%4.5f",
-__LINE__, 3.421159360472045e-30,	"3.42116E-30", "%G",
-__LINE__, 3.421973947898887e-06,	"3.42197E-06", "%4G",
-__LINE__, 3.425949002482817e-10,	"+3.42595E-10", "%+G",
-__LINE__, 3.428355150377972e+08,	"3.42836E+08", "%G",
-__LINE__, 3.445035158951526e+15,	"3445035158951526.454985", "%f",
-__LINE__, 3.447363996077534e+28,	"+3e+28", "%+2.e",
-__LINE__, 3.451571062654907e-03,	"0.00345157", "%G",
-__LINE__, 3.452787236877688e+09,	"3.45279e+09", "%g",
-__LINE__, 3.454114826574939e-22,	"3.e-22", "%#3.e",
-__LINE__, 3.455241965974631e-03,	"0.003455", "%#f",
-__LINE__, 3.456190496554365e-18,	"3.E-18", "%#5.E",
-__LINE__, 3.456804565717233e-19,	"+0.000", "%+2.3f",
-__LINE__, 3.457077651539715e-28,	"3.457078E-28", "%E",
-__LINE__, 3.472025705376229e+22,	"3.472e+22", "%7.4g",
-__LINE__, 3.473308270919079e+03,	"3.473308e+03", "%e",
-__LINE__, 3.474468013243007e-30,	"3.47447e-30", "%g",
-__LINE__, 3.477976957097698e+22,	"3.47798e+22", "%g",
-__LINE__, 3.501174631980057e-06,	"4e-06", "%4.g",
-__LINE__, 3.501808481702140e+20,	"3.50181E+20", "%G",
-__LINE__, 3.511760000705324e+14,	"351176000070532.357000", "%f",
-__LINE__, 3.511870226306087e+29,	"3.51187e+29", "%.5e",
-__LINE__, 3.518846859147841e+02,	"+351.885", "%+G",
-__LINE__, 3.521659149753418e+25,	"35216591497534182053641416", "%5.f",
-__LINE__, 3.521721228178747e+21,	"4e+21", "%2.e",
-__LINE__, 3.526696007281458e+22,	"3.5267e+22", "%g",
-__LINE__, 3.535631031379084e-11,	"4e-11", "%5.0g",
-__LINE__, 3.537219665456759e-01,	"0.353722", "%f",
-__LINE__, 3.537252728287785e-09,	"3.537253E-09", "%E",
-__LINE__, 3.542561277796815e-19,	"3.542561E-19", "%E",
-__LINE__, 3.548942336915745e+13,	"3.54894E+13", "%.5E",
-__LINE__, 3.574385715121768e-24,	"3.57439E-24", "%#G",
-__LINE__, 3.578068067760211e-13,	"3.578068E-13", "%E",
-__LINE__, 3.583296432862266e-13,	"3.5833e-13", "%g",
-__LINE__, 3.591567367115590e+19,	"3.59157e+19", "%1g",
-__LINE__, 3.594902312287635e-24,	"3.5949E-24", "%G",
-__LINE__, 3.602929486764515e+12,	"3602929486764.514522", "%#f",
-__LINE__, 3.606699462631472e-01,	"+0.360670", "%+f",
-__LINE__, 3.608605968319811e+17,	"3.60861e+17", "%g",
-__LINE__, 3.608780761567885e+24,	"4e+24", "%0.e",
-__LINE__, 3.623857274715022e-15,	"3.62386E-15", "%1G",
-__LINE__, 3.627346251764432e-22,	"3.627e-22", "%.4g",
-__LINE__, 3.652610391698086e-16,	"0.000000", "%3f",
-__LINE__, 3.657463146689917e-19,	"   0", "%4.0f",
-__LINE__, 3.658538858712938e-15,	"4E-15", "%5.G",
-__LINE__, 3.660337267266058e+16,	"+36603372672660579.034698", "%+f",
-__LINE__, 3.661588742065142e-01,	"0.366159", "%g",
-__LINE__, 3.662296387211376e-25,	"0.000000", "%f",
-__LINE__, 3.668511100303393e-29,	"0.000000", "%7f",
-__LINE__, 3.669499303661920e+06,	"3.6695e+06", "%1.5g",
-__LINE__, 3.676856420121343e-23,	"3.6769e-23", "%0.4e",
-__LINE__, 3.677197473476901e-19,	"+3.6772e-19", "%+g",
-__LINE__, 3.677281754506453e+12,	"+3677281754506.452671", "%+f",
-__LINE__, 3.678420802401506e-19,	"3.67842E-19", "%G",
-__LINE__, 3.679970245325769e+07,	"3.67997e+07", "%g",
-__LINE__, 3.682528947621349e+05,	"4.e+05", "%#5.e",
-__LINE__, 3.688257471304210e+22,	"36882574713042104441740.320908", "%f",
-__LINE__, 3.689129734472166e-01,	"0.368913", "%0.6G",
-__LINE__, 3.693483801463324e+12,	"4E+12", "%3.E",
-__LINE__, 3.694612396584729e-21,	"+3.69461E-21", "%+G",
-__LINE__, 3.706150073392112e-19,	"0.000000", "%2f",
-__LINE__, 3.706824819530577e+21,	"3706824819530576853310.321894", "%f",
-__LINE__, 3.709583789659276e+19,	"+3.709584E+19", "%+#E",
-__LINE__, 3.711137503697284e+22,	"3.7111E+22", "%.5G",
-__LINE__, 3.717307412969522e-22,	"3.717307E-22", "%#E",
-__LINE__, 3.717434999853808e+24,	" 4E+24", "%6.G",
-__LINE__, 3.720761662524312e+14,	"+372076166252431.2285", "%+1.4f",
-__LINE__, 3.721613815237707e-10,	"3.72161e-10", "%g",
-__LINE__, 3.725086467464346e+14,	"3.72509E+14", "%G",
-__LINE__, 3.727427083626536e-15,	"+4E-15", "%+.0G",
-__LINE__, 3.731138322599465e-13,	"3.73114e-13", "%5g",
-__LINE__, 3.732248129614146e-04,	"  4E-04", "%7.E",
-__LINE__, 3.744422223926118e-24,	"3.744422E-24", "%E",
-__LINE__, 3.745595428897916e+21,	"+3745595428897916079336.027906", "%+f",
-__LINE__, 3.751308304055989e-08,	"+3.751308e-08", "%+e",
-__LINE__, 3.755395417696132e-02,	"0.037554", "%f",
-__LINE__, 3.769103881505159e+09,	"3.7691e+09", "%g",
-__LINE__, 3.769535572757430e+00,	"3.769536", "%6.7G",
-__LINE__, 3.770823872348274e-28,	"+0.000000", "%+f",
-__LINE__, 3.771160653578178e+29,	"3.77116e+29", "%g",
-__LINE__, 3.776563752716444e-12,	"4E-12", "%.0E",
-__LINE__, 3.777953798674786e-28,	"3.77795e-28", "%g",
-__LINE__, 3.785994690686598e+28,	"4E+28", "%5.G",
-__LINE__, 3.787487488835162e+01,	"+37.874875", "%+5f",
-__LINE__, 3.788249311173359e-18,	"3.788249E-18", "%E",
-__LINE__, 3.798728360791314e-08,	"3.798728E-08", "%2E",
-__LINE__, 3.799038238867092e+05,	"3.79904E+05", "%.5E",
-__LINE__, 3.799822564549600e+06,	"3.79982E+06", "%.5E",
-__LINE__, 3.804862840499834e-16,	"0", "%1.f",
-__LINE__, 3.805375156822481e+12,	"3805375156822.4814861", "%.7f",
-__LINE__, 3.821612790153376e-17,	"3.821613e-17", "%e",
-__LINE__, 3.825193659558693e+14,	"3.82519E+14", "%#G",
-__LINE__, 3.834180638680996e+17,	"+383418063868099565.638659", "%+f",
-__LINE__, 3.834759760605814e-12,	"3.83476E-12", "%G",
-__LINE__, 3.839786235582770e+16,	"+3.84e+16", "%+0.3g",
-__LINE__, 3.843164462248778e+28,	"3.84316e+28", "%#g",
-__LINE__, 3.845599697858050e+22,	"3.8456E+22", "%G",
-__LINE__, 3.850147271017228e-21,	"3.85e-21", "%.4g",
-__LINE__, 3.850283557812101e+07,	"3.85028E+07", "%G",
-__LINE__, 3.854235609725703e+03,	"3854.24", "%G",
-__LINE__, 3.864901885489405e-15,	"3.8649E-15", "%G",
-__LINE__, 3.868630187629983e-24,	"3.868630e-24", "%e",
-__LINE__, 3.876764606134972e-03,	"+3.8767646e-03", "%+#0.7e",
-__LINE__, 3.884553592855422e+08,	"+3.8845536e+08", "%+4.7e",
-__LINE__, 3.887417494351062e+03,	"3887.42", "%0g",
-__LINE__, 3.887561018972304e+03,	"3887.56", "%G",
-__LINE__, 3.888554801724658e-24,	"3.888555e-24", "%e",
-__LINE__, 3.892806891909861e-01,	"0.389281", "%f",
-__LINE__, 3.914459791345755e+15,	"+3.914460E+15", "%+E",
-__LINE__, 3.918383209642759e+01,	"39.1838", "%#G",
-__LINE__, 3.923970658741865e-10,	"3.92397E-10", "%G",
-__LINE__, 3.928163650272335e+18,	"3928163650272335161.162118", "%f",
-__LINE__, 3.933053127721002e-20,	"3.933053e-20", "%e",
-__LINE__, 3.939306552155218e-29,	"3.93931E-29", "%G",
-__LINE__, 3.953007066379472e+07,	"3.953007E+07", "%E",
-__LINE__, 3.954924824986267e-01,	"3.954925E-01", "%E",
-__LINE__, 3.956156072067987e+15,	"3.956E+15", "%0.4G",
-__LINE__, 3.957756196797224e+22,	"4.0E+22", "%4.1E",
-__LINE__, 3.960011413261009e+27,	"+3960011413261008783592842519.283295", "%+f",
-__LINE__, 3.961789076323378e+20,	"396178907632337828914.614875", "%f",
-__LINE__, 3.961985468081708e-28,	"3.96199E-28", "%1G",
-__LINE__, 3.975007582283812e-27,	"0.000000", "%0.6f",
-__LINE__, 3.987586813142132e+15,	"+3.98759e+15", "%+g",
-__LINE__, 3.992250836957379e+21,	"3.99225E+21", "%0G",
-__LINE__, 3.992985048620057e+00,	"3.9930", "%.4f",
-__LINE__, 4.000000000000000e+02,	"400.00", "%.2f",
-__LINE__, 4.000145414240556e+14,	"4.00015e+14", "%#6g",
-__LINE__, 4.000774453529974e-25,	"4E-25", "%.0E",
-__LINE__, 4.002041494804383e+17,	"4.002041E+17", "%E",
-__LINE__, 4.005505415013214e+17,	" 4E+17", "%6.2G",
-__LINE__, 4.008960306876491e-28,	"0.000", "%.3f",
-__LINE__, 4.032337828117640e+16,	"4.03234E+16", "%G",
-__LINE__, 4.035414597530057e+26,	"403541459753005682387083652.429283", "%f",
-__LINE__, 4.037065874793069e-01,	"0.403707", "%f",
-__LINE__, 4.047856284449970e-14,	"4.04786E-14", "%#G",
-__LINE__, 4.049037221323070e-04,	"4.049037e-04", "%e",
-__LINE__, 4.053458853142009e-07,	"4E-07", "%2.0E",
-__LINE__, 4.056455443275955e-22,	"4.056455e-22", "%e",
-__LINE__, 4.058158020771355e-22,	"4.05816e-22", "%#2g",
-__LINE__, 4.067283508945137e+02,	"+4.07e+02", "%+5.2e",
-__LINE__, 4.072155715199509e+11,	"4.072e+11", "%.4g",
-__LINE__, 4.074643403755990e-22,	"4e-22", "%0.g",
-__LINE__, 4.077450352325251e+08,	"4.1e+08", "%3.2g",
-__LINE__, 4.081492619284916e-08,	"4.081493E-08", "%E",
-__LINE__, 4.083271801996951e-10,	"4.083272E-10", "%#E",
-__LINE__, 4.090188547940879e-15,	"4.090189E-15", "%#E",
-__LINE__, 4.091167728938537e-11,	"4e-11", "%1.g",
-__LINE__, 4.091916745541154e+15,	"4091916745541153.588306", "%f",
-__LINE__, 4.092366122921161e+23,	"4E+23", "%0.E",
-__LINE__, 4.094638368212577e-11,	"4.09464E-11", "%#G",
-__LINE__, 4.097148443124199e-16,	"0.000000", "%f",
-__LINE__, 4.101057893946401e+06,	"4e+06", "%4.g",
-__LINE__, 4.101209521231476e+28,	"41012095212314756409455185348.633677", "%f",
-__LINE__, 4.105683659045903e+05,	"+4.E+05", "%+#1.G",
-__LINE__, 4.111553717385758e-16,	"4.11155e-16", "%g",
-__LINE__, 4.112186409918593e+14,	"+4.11219e+14", "%+g",
-__LINE__, 4.117782144860865e+25,	"4.117782E+25", "%5E",
-__LINE__, 4.119420921722146e-27,	"4.11942e-27", "%g",
-__LINE__, 4.134953783635018e+14,	"+4.1349538e+14", "%+.7e",
-__LINE__, 4.136990822648468e+11,	"4.136991E+11", "%E",
-__LINE__, 4.140475788523046e+14,	"+4E+14", "%+5.G",
-__LINE__, 4.149589679915584e+24,	"4.14959E+24", "%2G",
-__LINE__, 4.151240342256744e-22,	" 0", "%2.f",
-__LINE__, 4.155533104307272e-04,	"+0.000416", "%+f",
-__LINE__, 4.155890511880097e+25,	"4.155891e+25", "%e",
-__LINE__, 4.159907901074450e-19,	"4.159908E-19", "%7E",
-__LINE__, 4.171899783464252e+18,	"4E+18", "%.0E",
-__LINE__, 4.177920266276382e-17,	"+0.0000", "%+1.4f",
-__LINE__, 4.181728014477237e-20,	"4.18173e-20", "%.6g",
-__LINE__, 4.203600495086497e-30,	" 4E-30", "%6.G",
-__LINE__, 4.211166112605717e-08,	"4E-08", "%5.1G",
-__LINE__, 4.219513437404614e+18,	"+4E+18", "%+.0E",
-__LINE__, 4.221426315236785e+08,	"4.221426E+08", "%#E",
-__LINE__, 4.226224756005934e-13,	" 4.e-13", "%#7.g",
-__LINE__, 4.226979046489921e-01,	"4.226979e-01", "%#.6e",
-__LINE__, 4.236283521629158e-08,	"+4.23628E-08", "%+G",
-__LINE__, 4.239850628514233e-07,	"4.23985E-07", "%.6G",
-__LINE__, 4.241177358638621e+04,	"42411.773586", "%2f",
-__LINE__, 4.245306724398964e-13,	"0.000000", "%#f",
-__LINE__, 4.246194290300334e+16,	"42461942903003340.177293", "%2f",
-__LINE__, 4.251238996137952e-05,	"4.25124E-05", "%3G",
-__LINE__, 4.262432542017438e+13,	"42624325420174.375978", "%1f",
-__LINE__, 4.266383084300715e+16,	"4E+16", "%4.G",
-__LINE__, 4.292963398931474e-11,	"4.292963E-11", "%E",
-__LINE__, 4.296530271399131e-29,	"0.000000", "%6f",
-__LINE__, 4.303753949741171e+19,	"4.30375E+19", "%2G",
-__LINE__, 4.303767633827431e-28,	"4.30377e-28", "%g",
-__LINE__, 4.316181911403991e-30,	"4.3162e-30", "%#7.5g",
-__LINE__, 4.318654697213126e-18,	"4.31865e-18", "%g",
-__LINE__, 4.320618603119499e+05,	"432061.860312", "%3f",
-__LINE__, 4.322443609118441e+21,	"4.32244E+21", "%7.5E",
-__LINE__, 4.322522446810708e-15,	"4.32252e-15", "%.6g",
-__LINE__, 4.334728493589115e-18,	"0.000000", "%f",
-__LINE__, 4.335342531476346e-19,	"4.33534E-19", "%G",
-__LINE__, 4.340579325084176e-30,	"4.34058e-30", "%#0.6g",
-__LINE__, 4.340775659883185e+04,	"43407.756599", "%6f",
-__LINE__, 4.361131891528634e-14,	" 4E-14", "%6.G",
-__LINE__, 4.366662624371249e-02,	"+0.04", "%+4.g",
-__LINE__, 4.369919308458348e+28,	"+4.36992e+28", "%+2g",
-__LINE__, 4.369930393192433e-24,	"4.369930e-24", "%e",
-__LINE__, 4.376283118322521e-01,	"0.437628", "%g",
-__LINE__, 4.386868840825930e+19,	"4.3869E+19", "%.5G",
-__LINE__, 4.389349113395235e+05,	"+4.389349e+05", "%+e",
-__LINE__, 4.392447466753053e-08,	"+4.392E-08", "%+.4G",
-__LINE__, 4.394068619246889e-13,	"4.39407e-13", "%6g",
-__LINE__, 4.404889573700147e-09,	"4.404890E-09", "%E",
-__LINE__, 4.410531039373014e+05,	"+4.41e+05", "%+.2e",
-__LINE__, 4.412466606726400e-08,	"   0.0", "%6.1f",
-__LINE__, 4.414693719279123e+17,	"4.414694e+17", "%e",
-__LINE__, 4.417050329080679e-01,	"+0.441705", "%+g",
-__LINE__, 4.419509841929196e-10,	"4.4195098E-10", "%.7E",
-__LINE__, 4.421012777695611e+07,	"+4.42101E+07", "%+0.6G",
-__LINE__, 4.426387732151208e+11,	"4.42639e+11", "%g",
-__LINE__, 4.439567017550398e+26,	"4.439567E+26", "%E",
-__LINE__, 4.446479816166258e-21,	"4.446480e-21", "%0e",
-__LINE__, 4.453486178424380e+05,	"445348.617842", "%f",
-__LINE__, 4.455733696043438e+06,	"4.45573e+06", "%3g",
-__LINE__, 4.455870606312063e+16,	"4.45587e+16", "%g",
-__LINE__, 4.458776435431700e+22,	"4e+22", "%1.g",
-__LINE__, 4.466448605584151e-30,	"0.000000", "%f",
-__LINE__, 4.471063097005706e+16,	"4.47106E+16", "%G",
-__LINE__, 4.482001890035190e-22,	"+4.482E-22", "%+G",
-__LINE__, 4.493246870093631e+05,	"449325", "%1G",
-__LINE__, 4.496089639281023e+17,	"4.49609e+17", "%g",
-__LINE__, 4.515066070117557e+15,	"4.51507e+15", "%g",
-__LINE__, 4.518296460916194e+24,	"+4.5183E+24", "%+G",
-__LINE__, 4.526548719445596e+02,	"452.655", "%6.3f",
-__LINE__, 4.532756455106440e-26,	"4.53e-26", "%4.2e",
-__LINE__, 4.534466782633055e-14,	"4.53447E-14", "%G",
-__LINE__, 4.541313061854649e-14,	"4.54131E-14", "%G",
-__LINE__, 4.541848265404338e+02,	"  5E+02", "%7.G",
-__LINE__, 4.546603085406363e-26,	"5E-26", "%3.G",
-__LINE__, 4.557349604829375e+28,	"+45573496048293753446500886639.", "%+#1.f",
-__LINE__, 4.560736449944898e-27,	"4.56074e-27", "%g",
-__LINE__, 4.563726230559341e-15,	"+0.0", "%+2.1f",
-__LINE__, 4.572650965532532e-26,	"+5E-26", "%+4.G",
-__LINE__, 4.574369572115099e-10,	"+0.000000", "%+2.6f",
-__LINE__, 4.576480601519729e+28,	"+4.576481e+28", "%+e",
-__LINE__, 4.587487640650499e+02,	"+458.75", "%+3.2f",
-__LINE__, 4.598365231538559e-27,	"4.59837E-27", "%G",
-__LINE__, 4.599348244725009e-28,	"+4.5993482e-28", "%+#3.7e",
-__LINE__, 4.599897524047587e+22,	"45998975240475870052136.997401", "%#f",
-__LINE__, 4.605415604725077e-25,	"0.000000", "%f",
-__LINE__, 4.613055015797716e+28,	"4.613055E+28", "%E",
-__LINE__, 4.618715275814238e-10,	"4.618715E-10", "%E",
-__LINE__, 4.619044579489540e-14,	"0.00", "%.2f",
-__LINE__, 4.633693310095410e-20,	"+0.000000", "%+f",
-__LINE__, 4.648505395281916e-28,	"0.000000", "%f",
-__LINE__, 4.651232770446398e+21,	"4.65e+21", "%.2e",
-__LINE__, 4.659743589975352e+28,	"+4.65974e+28", "%+g",
-__LINE__, 4.660181457075208e-13,	"4.66018e-13", "%g",
-__LINE__, 4.669787018529686e+20,	"4.66979e+20", "%g",
-__LINE__, 4.672649286126732e-21,	"4.6726E-21", "%4.5G",
-__LINE__, 4.675431901120643e-11,	"  0", "%3.f",
-__LINE__, 4.684404068169945e+26,	"468440406816994503458317922.2", "%6.1f",
-__LINE__, 4.685438834234642e+19,	"5.E+19", "%#6.G",
-__LINE__, 4.688915890732712e+00,	"+5e+00", "%+2.e",
-__LINE__, 4.692999432046297e+00,	"4.692999E+00", "%E",
-__LINE__, 4.708690772584701e+11,	"4.70869e+11", "%g",
-__LINE__, 4.711821455782105e-11,	"+4.71182e-11", "%+1g",
-__LINE__, 4.712413965116830e-01,	"4.712414E-01", "%E",
-__LINE__, 4.719504715401049e-08,	"0.000000", "%f",
-__LINE__, 4.719767896031655e+27,	"4.71977e+27", "%#g",
-__LINE__, 4.722493017411588e-05,	"0.000047", "%4f",
-__LINE__, 4.729482386761477e+08,	"4.72948e+08", "%1g",
-__LINE__, 4.730102169800602e-06,	"0.000005", "%f",
-__LINE__, 4.743951614209393e+24,	"4.743952E+24", "%#E",
-__LINE__, 4.746077075605921e-16,	"4.746E-16", "%.3E",
-__LINE__, 4.747802537919248e+24,	"4747802537919247889419694", "%4.f",
-__LINE__, 4.754727690703025e-26,	"0", "%0.f",
-__LINE__, 4.756952432926979e-29,	" 0.", "%#3.f",
-__LINE__, 4.758335147956709e+03,	"4758.335148", "%f",
-__LINE__, 4.760141880810268e-25,	"4.760142e-25", "%e",
-__LINE__, 4.767079423650815e-07,	"5.E-07", "%#0.G",
-__LINE__, 4.785662728343338e-28,	"4.78566e-28", "%g",
-__LINE__, 4.787146245774150e-13,	"+4.78715E-13", "%+G",
-__LINE__, 4.787415449888824e-17,	"4.78742e-17", "%3g",
-__LINE__, 4.794589807429657e-05,	"4.79459E-05", "%6G",
-__LINE__, 4.794948299666205e+08,	"4.79495e+08", "%g",
-__LINE__, 4.802292865915992e-04,	"4.802293e-04", "%e",
-__LINE__, 4.802513688198601e+07,	"+4.8e+07", "%+2.3g",
-__LINE__, 4.810456746192536e+06,	"5E+06", "%0.0G",
-__LINE__, 4.820631660081696e+20,	"+4.82063E+20", "%+G",
-__LINE__, 4.827865857270075e-20,	"4.82787e-20", "%g",
-__LINE__, 4.835054268490970e+21,	"4835054268490970308391.752042", "%#f",
-__LINE__, 4.838136770808465e-18,	"4.83814E-18", "%G",
-__LINE__, 4.839342397882353e-26,	"4.839342E-26", "%E",
-__LINE__, 4.845130210072029e-16,	"0", "%1.f",
-__LINE__, 4.845161043167169e-12,	"+4.845e-12", "%+.4g",
-__LINE__, 4.857425142494964e+01,	"48.574251", "%f",
-__LINE__, 4.858118337285513e-10,	"+4.8581e-10", "%+.5g",
-__LINE__, 4.867478343525339e-15,	"+4.867478E-15", "%+E",
-__LINE__, 4.886137001331278e-11,	"0.000000", "%f",
-__LINE__, 4.886835850687998e-20,	"     0", "%6.0f",
-__LINE__, 4.886880737482383e+26,	"488688073748238327453918827.814050", "%4f",
-__LINE__, 4.888812049144075e-22,	"4.888812E-22", "%E",
-__LINE__, 4.895869618002905e+02,	"+489.587", "%+.7g",
-__LINE__, 4.902046593298549e+09,	"  5e+09", "%7.g",
-__LINE__, 4.907918627564751e-05,	"4.91e-05", "%.3g",
-__LINE__, 4.916048355579009e+19,	"49160483555790088772", "%2.f",
-__LINE__, 4.917197806128638e+14,	"+5e+14", "%+5.g",
-__LINE__, 4.918303274189911e+13,	"4.918303e+13", "%e",
-__LINE__, 4.922687970321108e+26,	"492268797032110771993984599.2485", "%0.4f",
-__LINE__, 4.929263362431195e+14,	"4.92926e+14", "%g",
-__LINE__, 4.933385398543267e-17,	"0.000000", "%#f",
-__LINE__, 4.942367126455025e+00,	"    +5", "%+6.f",
-__LINE__, 4.947687486717652e-04,	"0.000495", "%.6f",
-__LINE__, 4.960855200003128e-08,	"+4.960855e-08", "%+e",
-__LINE__, 4.968485435774085e-21,	"0.0000", "%#2.4f",
-__LINE__, 4.972088381506133e+01,	"49.7", "%.1f",
-__LINE__, 4.977561524480392e-15,	"4.977562E-15", "%7E",
-__LINE__, 4.984592111249502e-13,	"5.0e-13", "%.1e",
-__LINE__, 4.997502335602838e-14,	"4.998e-14", "%6.4g",
-__LINE__, 5.001731554335935e-09,	"5.00173e-09", "%g",
-__LINE__, 5.006231697107042e-17,	"5.0062e-17", "%1.5g",
-__LINE__, 5.008035801093423e+24,	"5.008036E+24", "%#E",
-__LINE__, 5.008756965733827e-28,	"5.009E-28", "%.4G",
-__LINE__, 5.009774027622812e+20,	"+5.00977E+20", "%+G",
-__LINE__, 5.010576312346293e+29,	"5.01058E+29", "%G",
-__LINE__, 5.012335250996786e+29,	"5.012335e+29", "%.7g",
-__LINE__, 5.012404365186907e+20,	"5E+20", "%3.2G",
-__LINE__, 5.024670103250229e-01,	"+5.024670E-01", "%+E",
-__LINE__, 5.025765369164560e+03,	"5025.77", "%g",
-__LINE__, 5.027173841003918e+11,	"+5.02717E+11", "%+G",
-__LINE__, 5.032093817639893e-26,	"5e-26", "%3.e",
-__LINE__, 5.039636818525848e-02,	"0.050396", "%#f",
-__LINE__, 5.040626671307691e+23,	"5.040627E+23", "%E",
-__LINE__, 5.040788233368296e-11,	"+5.04079e-11", "%+g",
-__LINE__, 5.040903321336150e-28,	"5.0409E-28", "%G",
-__LINE__, 5.042078512958994e+12,	"5.04208E+12", "%G",
-__LINE__, 5.045957900223303e+15,	"5045957900223303", "%0.f",
-__LINE__, 5.048298764352134e-14,	"5.048299e-14", "%1e",
-__LINE__, 5.048827326763192e+28,	"50488273267631917917697137454.524636", "%f",
-__LINE__, 5.049714558347361e-23,	"5e-23", "%5.0g",
-__LINE__, 5.051509904923853e+16,	"50515099049238534", "%5.f",
-__LINE__, 5.052789863743305e-10,	"5.05279E-10", "%6G",
-__LINE__, 5.057429728861999e-29,	"0.000", "%#1.3f",
-__LINE__, 5.075313093968501e-13,	"+5.07531e-13", "%+g",
-__LINE__, 5.075874503501582e+29,	"5e+29", "%2.e",
-__LINE__, 5.079468079020803e+01,	"50.795", "%.5G",
-__LINE__, 5.086214826494080e-28,	" 0.0", "%4.1f",
-__LINE__, 5.096054881114421e+13,	"5.096e+13", "%.4g",
-__LINE__, 5.099045274853458e-23,	"5.09905E-23", "%0G",
-__LINE__, 5.100248195124433e+00,	"5.100248", "%f",
-__LINE__, 5.101016114276598e-20,	"5e-20", "%4.1g",
-__LINE__, 5.103213528670269e+07,	"51032135.286703", "%6f",
-__LINE__, 5.108373625126768e+08,	"+510837362.512677", "%+f",
-__LINE__, 5.113097157183416e+07,	"5.1131E+07", "%#.4E",
-__LINE__, 5.114452611789777e+08,	"+5.11445E+08", "%+G",
-__LINE__, 5.117099184715288e-16,	"5.1171E-16", "%G",
-__LINE__, 5.119910534665511e-13,	"+5.11991E-13", "%+G",
-__LINE__, 5.121320931953720e+23,	"+5.121321e+23", "%+#e",
-__LINE__, 5.121900318443998e+06,	"5.121900e+06", "%e",
-__LINE__, 5.135698679084286e+00,	"5.1357", "%2g",
-__LINE__, 5.146355903104154e-10,	"+5.14636E-10", "%+.6G",
-__LINE__, 5.148754210958986e-24,	"+5.148754e-24", "%+e",
-__LINE__, 5.156238368448428e+26,	"5e+26", "%5.g",
-__LINE__, 5.159924520667922e-19,	"+5E-19", "%+0.1G",
-__LINE__, 5.159938266135425e-27,	"0.000000", "%f",
-__LINE__, 5.165915205175676e-01,	"5.165915e-01", "%e",
-__LINE__, 5.190205499401547e-11,	"5e-11", "%2.1g",
-__LINE__, 5.193260005542003e+26,	"5.19326e+26", "%#g",
-__LINE__, 5.194732077318269e+08,	"519473207.731827", "%f",
-__LINE__, 5.196394616633798e-19,	"0", "%.0f",
-__LINE__, 5.206753628035638e+19,	"5.20675e+19", "%6.6g",
-__LINE__, 5.207364136540851e-23,	" 0.000", "%6.3f",
-__LINE__, 5.210672737132108e-09,	"5.21067E-09", "%G",
-__LINE__, 5.211423933057123e-20,	"+5.21142E-20", "%+G",
-__LINE__, 5.219749528363367e-27,	"5.219750e-27", "%e",
-__LINE__, 5.228031587478653e-06,	"+5.2E-06", "%+3.1E",
-__LINE__, 5.229303095005359e-25,	"+0.000000", "%+#f",
-__LINE__, 5.234703511938320e-06,	"      0", "%7.f",
-__LINE__, 5.235655046937822e-20,	"5.235655E-20", "%.6E",
-__LINE__, 5.237924986002288e-01,	"+0.52379", "%+.5f",
-__LINE__, 5.249148093603826e+20,	"5.24915E+20", "%0G",
-__LINE__, 5.262680920244596e+16,	"5.26268E+16", "%G",
-__LINE__, 5.267944704715845e-06,	"5.e-06", "%#3.g",
-__LINE__, 5.268543533730505e-08,	"5.26854E-08", "%G",
-__LINE__, 5.275727269515247e-02,	"0.0527573", "%.6g",
-__LINE__, 5.279215316873723e+24,	"5279215316873722585455652.733799", "%f",
-__LINE__, 5.284326985680811e+16,	"52843269856808108.286828", "%6f",
-__LINE__, 5.286192957344040e-10,	"5.3E-10", "%.1E",
-__LINE__, 5.289451976001091e-23,	"5.28945E-23", "%G",
-__LINE__, 5.289512908209300e+09,	"+5.289513e+09", "%+e",
-__LINE__, 5.295696957972123e+11,	"5.296E+11", "%#.3E",
-__LINE__, 5.303584684011050e+16,	"53035846840110503.208621", "%f",
-__LINE__, 5.310315581980172e+23,	"531031558198017172855998", "%4.f",
-__LINE__, 5.317492728410062e-14,	"5.31749e-14", "%7g",
-__LINE__, 5.324506949499409e+18,	"5.3245E+18", "%.5G",
-__LINE__, 5.329238068668336e-20,	"5e-20", "%4.g",
-__LINE__, 5.336050125161774e+14,	"5.33605e+14", "%g",
-__LINE__, 5.349921315003169e-17,	"5.34992E-17", "%.6G",
-__LINE__, 5.355648481782587e-20,	"5.355648e-20", "%e",
-__LINE__, 5.358945557589489e-26,	"+5e-26", "%+0.g",
-__LINE__, 5.359638846465574e+21,	"5.359639E+21", "%E",
-__LINE__, 5.377048469393900e+14,	"5.377E+14", "%.5G",
-__LINE__, 5.387471194156434e+23,	"5.387471E+23", "%.7G",
-__LINE__, 5.401622578962497e-03,	"+0.0054", "%+5.2g",
-__LINE__, 5.406882732497444e-16,	"5.406883E-16", "%E",
-__LINE__, 5.421474560523198e-11,	"+5.42147e-11", "%+g",
-__LINE__, 5.440249323479418e-26,	"5.44025E-26", "%7G",
-__LINE__, 5.440922682921101e-05,	"5e-05", "%.1g",
-__LINE__, 5.444400103673185e-01,	"0.54444", "%G",
-__LINE__, 5.449339470916152e+09,	"5449339470.9162", "%.4f",
-__LINE__, 5.451583259558706e-15,	"5.e-15", "%#4.e",
-__LINE__, 5.460153018660573e+26,	"+546015301866057267687892817.775719", "%+f",
-__LINE__, 5.477591210511918e+08,	"+5.47759E+08", "%+0.5E",
-__LINE__, 5.481665401407188e-02,	"5.481665e-02", "%e",
-__LINE__, 5.482670784411319e-16,	"5E-16", "%4.G",
-__LINE__, 5.487494580636099e+12,	"5.48749e+12", "%g",
-__LINE__, 5.508630369473937e-10,	"5.508630e-10", "%e",
-__LINE__, 5.528898001438273e+20,	"6e+20", "%4.g",
-__LINE__, 5.530331734443152e-24,	" 6e-24", "%6.g",
-__LINE__, 5.531704398969656e-24,	"0.000000", "%f",
-__LINE__, 5.539906569043238e+05,	"+553990.656904", "%+f",
-__LINE__, 5.554571854756323e-08,	"+0.00000", "%+4.5f",
-__LINE__, 5.555155069925145e-28,	"5.55516e-28", "%g",
-__LINE__, 5.555302705075539e-08,	"+5.5553e-08", "%+g",
-__LINE__, 5.563805076159055e-05,	"5.563805e-05", "%e",
-__LINE__, 5.565063508995002e+07,	"5.565E+07", "%.3E",
-__LINE__, 5.566281664807526e-08,	"5.56628E-08", "%G",
-__LINE__, 5.575245679736338e-08,	"5.575246e-08", "%e",
-__LINE__, 5.578254777281501e-21,	"0.", "%#.0f",
-__LINE__, 5.582389275770848e-01,	"  0.6", "%5.G",
-__LINE__, 5.592215029176133e-04,	"0.00056", "%.2g",
-__LINE__, 5.593536789867047e-25,	"5.59354e-25", "%g",
-__LINE__, 5.605652054074862e-03,	"   0.006", "%8.G",
-__LINE__, 5.606982382643258e+20,	"+5.60698E+20", "%+G",
-__LINE__, 5.614646821116853e-18,	"5.6E-18", "%.2G",
-__LINE__, 5.625586848606565e-11,	"+5.62559E-11", "%+G",
-__LINE__, 5.626300428046732e+26,	"  6e+26", "%7.g",
-__LINE__, 5.638236626881086e-17,	" 6E-17", "%6.G",
-__LINE__, 5.645744817075691e+04,	"5.645745E+04", "%E",
-__LINE__, 5.651410004691736e+06,	"6.E+06", "%#3.E",
-__LINE__, 5.659582345929256e-11,	"+0.000000", "%+f",
-__LINE__, 5.670968861413510e+16,	"+5.67097E+16", "%+G",
-__LINE__, 5.672476851235796e+01,	"+56.724769", "%+0f",
-__LINE__, 5.674563779921248e+28,	" 6E+28", "%6.0G",
-__LINE__, 5.675558529939025e+19,	"5.67556e+19", "%3g",
-__LINE__, 5.676326888314589e-08,	"  6e-08", "%7.g",
-__LINE__, 5.677928507840897e-30,	"5.67793e-30", "%0g",
-__LINE__, 5.686622552402630e-15,	"5.69E-15", "%1.3G",
-__LINE__, 5.710441686922142e-14,	"5.710442E-14", "%E",
-__LINE__, 5.713234603280163e-21,	"0.00000", "%0.5f",
-__LINE__, 5.714968959046963e+12,	"5.71497e+12", "%g",
-__LINE__, 5.722025141555638e-23,	"5.72e-23", "%.2e",
-__LINE__, 5.725398571007033e-09,	"5.7254E-09", "%.6G",
-__LINE__, 5.751604813862738e+18,	"6E+18", "%.1G",
-__LINE__, 5.761025444751985e+20,	"5.76103e+20", "%g",
-__LINE__, 5.762315767948593e+15,	"5.76232e+15", "%4g",
-__LINE__, 5.764528858586032e-15,	"5.764529E-15", "%6.7G",
-__LINE__, 5.766408541535810e-07,	" 6E-07", "%6.1G",
-__LINE__, 5.771831571087174e-01,	"0.577183", "%f",
-__LINE__, 5.790102497364865e-15,	"+5.790102e-15", "%+e",
-__LINE__, 5.790222335547785e-08,	"5.79022e-08", "%0.6g",
-__LINE__, 5.794082127091130e+21,	"5794082127091130018925.468903", "%f",
-__LINE__, 5.804568463644165e+28,	"5.80457e+28", "%g",
-__LINE__, 5.827356651901066e+20,	"582735665190106555400.006982", "%f",
-__LINE__, 5.837553387436408e+18,	"5.837553E+18", "%3E",
-__LINE__, 5.844458110907209e+22,	"5.84446e+22", "%g",
-__LINE__, 5.851672125746866e-19,	"5.85167e-19", "%g",
-__LINE__, 5.868843476784172e-12,	"5.868843e-12", "%1.7g",
-__LINE__, 5.870854146748864e-04,	"0.000587", "%2.3g",
-__LINE__, 5.877787821470433e+01,	"+58.77788", "%+#3.5f",
-__LINE__, 5.881333514866498e+04,	"5.881334E+04", "%E",
-__LINE__, 5.908427816128965e+28,	"+5.908428E+28", "%+E",
-__LINE__, 5.918139800007388e+07,	"59181398.000074", "%f",
-__LINE__, 5.925587467475260e+21,	"5925587467475259551008.548442", "%f",
-__LINE__, 5.930403502679683e-22,	"5.9304E-22", "%.6G",
-__LINE__, 5.961572644847521e+02,	"+596.157", "%+G",
-__LINE__, 5.968917715225198e-21,	"5.96892e-21", "%4g",
-__LINE__, 5.982184454670110e-08,	"0", "%0.f",
-__LINE__, 5.988414319040855e+09,	"6E+09", "%0.G",
-__LINE__, 5.996263783103995e-10,	"5.996264e-10", "%e",
-__LINE__, 6.004634162276014e-18,	"6.00463e-18", "%g",
-__LINE__, 6.018734975519166e-08,	"6.01873E-08", "%G",
-__LINE__, 6.029071822986717e-14,	"0.0000000", "%.7f",
-__LINE__, 6.030392278117406e+23,	"6.030392e+23", "%e",
-__LINE__, 6.034553399237175e-27,	"+6.03455e-27", "%+g",
-__LINE__, 6.034938873443862e+24,	"6034938873443861595546877.651941", "%f",
-__LINE__, 6.038929148003457e-16,	"6.03893e-16", "%g",
-__LINE__, 6.039149626573702e-13,	"6.0391E-13", "%3.5G",
-__LINE__, 6.041247664739301e+29,	"6.041248E+29", "%3E",
-__LINE__, 6.044220746789781e+20,	"+6.04422e+20", "%+g",
-__LINE__, 6.045775647107433e+19,	"6E+19", "%2.G",
-__LINE__, 6.051917010461611e-05,	"6.05192E-05", "%G",
-__LINE__, 6.059773181566425e+17,	"+605977318156642486", "%+5.f",
-__LINE__, 6.082239575475813e+01,	"+6E+01", "%+.1G",
-__LINE__, 6.093984174629151e+18,	"6.093984e+18", "%e",
-__LINE__, 6.102368380479137e+22,	"6.1E+22", "%.2G",
-__LINE__, 6.103097446204007e+25,	"61030974462040070704915706.301108", "%#0f",
-__LINE__, 6.105244994410556e-24,	"0.0000000", "%2.7f",
-__LINE__, 6.110828906801633e-14,	"+6.110829e-14", "%+3e",
-__LINE__, 6.124439072468681e-30,	"6.12444e-30", "%g",
-__LINE__, 6.127714703273447e-15,	"0", "%0.f",
-__LINE__, 6.128539582408870e-15,	"6.12854e-15", "%g",
-__LINE__, 6.145470264744349e+24,	"6145470264744348654062378.045637", "%f",
-__LINE__, 6.159177701667455e+26,	"615917770166745537352426254.074089", "%#f",
-__LINE__, 6.159348213337442e+17,	"6.15935e+17", "%g",
-__LINE__, 6.161953891020492e-21,	"0.000000", "%f",
-__LINE__, 6.169474192777305e+29,	"+6.169E+29", "%+.4G",
-__LINE__, 6.198519761010651e-15,	"+0", "%+1.f",
-__LINE__, 6.201381824304919e-27,	"    0", "%5.f",
-__LINE__, 6.204387065736372e-18,	"6.204387E-18", "%7E",
-__LINE__, 6.209270088144063e-24,	"0.000000", "%f",
-__LINE__, 6.209871738353546e-20,	"6.20987E-20", "%G",
-__LINE__, 6.222733191871026e+14,	"+6.22273e+14", "%+g",
-__LINE__, 6.234670085354310e+04,	"+62346.700854", "%+f",
-__LINE__, 6.258389346602224e-09,	"6E-09", "%.0G",
-__LINE__, 6.263326582587503e+12,	"6263326582588.", "%#5.f",
-__LINE__, 6.272768026763922e+03,	"+6272.77", "%+g",
-__LINE__, 6.287747868625765e+00,	"6E+00", "%.0E",
-__LINE__, 6.297724027388795e-17,	"+6E-17", "%+3.G",
-__LINE__, 6.309940679156400e+27,	"6.30994e+27", "%6.5e",
-__LINE__, 6.312960327030170e+06,	"+6.312960E+06", "%+E",
-__LINE__, 6.317658179632976e+02,	"+631.766", "%+g",
-__LINE__, 6.321255960699571e-27,	"0.000000", "%f",
-__LINE__, 6.323069932833900e+03,	"6323", "%.4G",
-__LINE__, 6.337027835933034e+21,	"6.33703e+21", "%#g",
-__LINE__, 6.343583177899838e-03,	"0.00634358", "%7G",
-__LINE__, 6.347464241733904e-03,	"6.e-03", "%#0.e",
-__LINE__, 6.352038720353924e+07,	"63520387.203539", "%f",
-__LINE__, 6.355292378565109e+23,	"+635529237856510942350496.407016", "%+f",
-__LINE__, 6.377901944439164e-29,	"0.000", "%2.3f",
-__LINE__, 6.378660255554053e-04,	"6.37866E-04", "%.5E",
-__LINE__, 6.382838195255167e-18,	"0.000000", "%f",
-__LINE__, 6.391046303581911e+22,	"6E+22", "%.0G",
-__LINE__, 6.404812348309621e+22,	"6.404812E+22", "%.7G",
-__LINE__, 6.406154091357119e+16,	"6.40615E+16", "%G",
-__LINE__, 6.419414726557980e+21,	"+6.41941e+21", "%+g",
-__LINE__, 6.432166563008504e+10,	" +6e+10", "%+7.g",
-__LINE__, 6.438463704193190e+19,	"6.438464e+19", "%e",
-__LINE__, 6.445270237908565e+15,	"+6.445270E+15", "%+E",
-__LINE__, 6.445536770502964e+09,	"6.446e+09", "%.3e",
-__LINE__, 6.446614224811444e+28,	"64466142248114444157636171439.662576", "%f",
-__LINE__, 6.457046289718297e+18,	"6457046289718297416.015957", "%4f",
-__LINE__, 6.457682856890173e+01,	"6.457683E+01", "%2E",
-__LINE__, 6.471026352792729e-16,	"+6.47103e-16", "%+g",
-__LINE__, 6.474527749567342e+19,	"6E+19", "%.1G",
-__LINE__, 6.481178401781131e-24,	"+6.48E-24", "%+6.3G",
-__LINE__, 6.490736647261461e-15,	"+6.49074e-15", "%+g",
-__LINE__, 6.493196535069719e+23,	"+6.4932E+23", "%+G",
-__LINE__, 6.500296992935538e-20,	"+0.0", "%+.1f",
-__LINE__, 6.502867735895890e-19,	"+0.000000", "%+6f",
-__LINE__, 6.506627529164683e+14,	"650662752916468", "%5.f",
-__LINE__, 6.511909298966434e-15,	"+6.51191E-15", "%+G",
-__LINE__, 6.514463062693312e+01,	"65.1446", "%G",
-__LINE__, 6.520721469484543e+16,	"6.52072E+16", "%G",
-__LINE__, 6.528064508731680e-05,	"6.528065E-05", "%7E",
-__LINE__, 6.529007214194039e-24,	"0.000000", "%f",
-__LINE__, 6.537822760557410e-23,	"0.000000", "%f",
-__LINE__, 6.552222096390805e+29,	"+6.55222E+29", "%+G",
-__LINE__, 6.554569862717104e+12,	"6.55457E+12", "%G",
-__LINE__, 6.563440840359989e-30,	"7E-30", "%4.G",
-__LINE__, 6.586246985535526e+17,	"6.58625E+17", "%#4G",
-__LINE__, 6.593339522442827e+16,	"6.6E+16", "%#4.1E",
-__LINE__, 6.611179030024350e+02,	"7E+02", "%4.E",
-__LINE__, 6.617541638586767e-10,	"6.617542E-10", "%E",
-__LINE__, 6.619147920886991e-28,	"7e-28", "%.1g",
-__LINE__, 6.622304444772819e-21,	"6.62230E-21", "%#4G",
-__LINE__, 6.634766655157910e+12,	"6634766655158", "%2.f",
-__LINE__, 6.635639771921218e+25,	"+6.63564E+25", "%+G",
-__LINE__, 6.644575305929087e+17,	"+6.64458e+17", "%+g",
-__LINE__, 6.648697591328432e+04,	"6.648698E+04", "%3E",
-__LINE__, 6.665426012448100e+09,	"6.66543E+09", "%G",
-__LINE__, 6.675222780441723e-23,	"6.67522e-23", "%1g",
-__LINE__, 6.689765053880623e+00,	"6.6898", "%.5g",
-__LINE__, 6.693874943680238e+25,	"7.e+25", "%#1.g",
-__LINE__, 6.695033453546435e+19,	"6.695033E+19", "%E",
-__LINE__, 6.720131534244976e+03,	"+6720.132", "%+.3f",
-__LINE__, 6.725287004784564e+19,	"+6.72529e+19", "%+g",
-__LINE__, 6.743599626906313e-18,	"0.0000000", "%7.7f",
-__LINE__, 6.755534260704152e+29,	"7.e+29", "%#5.e",
-__LINE__, 6.761855244766418e-18,	"6.8E-18", "%.2G",
-__LINE__, 6.764974143681080e-02,	"6.765E-02", "%2.3E",
-__LINE__, 6.766924477711975e-17,	"0.000000", "%4f",
-__LINE__, 6.772195434106330e-19,	"6.7722E-19", "%G",
-__LINE__, 6.779433073319225e-23,	"0.00", "%.2f",
-__LINE__, 6.790317710068964e+05,	"6.8e+05", "%.1e",
-__LINE__, 6.791378160292960e+02,	"679.137816", "%f",
-__LINE__, 6.798381262104190e-27,	"0.000000", "%f",
-__LINE__, 6.804165939424860e-14,	"7e-14", "%4.g",
-__LINE__, 6.810668670623699e+11,	"681066867062.369852", "%f",
-__LINE__, 6.838942637635821e-17,	"+6.84e-17", "%+.2e",
-__LINE__, 6.868523988329111e-09,	"+6.868524e-09", "%+e",
-__LINE__, 6.873228061403223e-15,	"6.873228E-15", "%3E",
-__LINE__, 6.879370500093334e-12,	"+0.000000", "%+f",
-__LINE__, 6.891525498686674e-10,	"7e-10", "%0.g",
-__LINE__, 6.923027319286220e+21,	"7.e+21", "%#1.g",
-__LINE__, 6.923565533024560e-11,	"+6.92357e-11", "%+g",
-__LINE__, 6.931415640770737e-24,	"+6.93142e-24", "%+g",
-__LINE__, 6.936582619246057e+09,	"6.936583e+09", "%7e",
-__LINE__, 6.938661496670582e+05,	"693866.1496671", "%2.7f",
-__LINE__, 6.946115378286550e-25,	"0.000000", "%f",
-__LINE__, 6.955823211921219e-09,	"6.95582e-09", "%g",
-__LINE__, 6.962365243425770e+29,	"696236524342577034474288666388.019919", "%7f",
-__LINE__, 6.970432274812882e+05,	"+7e+05", "%+1.0e",
-__LINE__, 6.975784942897122e-13,	"6.975785e-13", "%e",
-__LINE__, 6.976786489904214e-07,	"6.97679E-07", "%3G",
-__LINE__, 6.985245976357042e-05,	"0.00", "%.2f",
-__LINE__, 6.993402879410720e-21,	"6.9934e-21", "%g",
-__LINE__, 7.012183985341519e+28,	"+70121839853415188770213717362", "%+2.f",
-__LINE__, 7.028670648856025e-15,	"7.028671e-15", "%.7g",
-__LINE__, 7.034042985683665e-03,	" 0", "%2.f",
-__LINE__, 7.044054273278726e+18,	"7.044e+18", "%7.4g",
-__LINE__, 7.049706744250734e-06,	"7E-06", "%0.E",
-__LINE__, 7.061982657056197e+13,	"+7.061983e+13", "%+e",
-__LINE__, 7.066873668945899e+21,	"7.06687E+21", "%G",
-__LINE__, 7.087941418633258e+26,	"7.08794E+26", "%G",
-__LINE__, 7.108268134631547e+22,	"7.108268E+22", "%E",
-__LINE__, 7.112095848565475e-19,	"7.1121e-19", "%g",
-__LINE__, 7.116326241291862e+16,	"7.116326e+16", "%e",
-__LINE__, 7.118854843597607e-22,	"0.000000", "%f",
-__LINE__, 7.121423043456375e-27,	"0.000000", "%f",
-__LINE__, 7.131415427096460e-03,	"0.007131", "%3f",
-__LINE__, 7.132023279679892e+22,	"7.e+22", "%#3.e",
-__LINE__, 7.146250280189992e-18,	"0.000000", "%f",
-__LINE__, 7.150059058390724e+03,	"7150.06", "%g",
-__LINE__, 7.161081578177381e-02,	"+0.0716108", "%+G",
-__LINE__, 7.164935125149336e-27,	"7.2E-27", "%#6.2G",
-__LINE__, 7.173125717489549e-10,	"7.173126e-10", "%e",
-__LINE__, 7.174199549624193e+00,	"7.1741995", "%.7f",
-__LINE__, 7.192493588077649e+27,	"7.19249e+27", "%g",
-__LINE__, 7.215209568601445e-06,	"7.215210e-06", "%e",
-__LINE__, 7.238322284100497e+03,	"7238.3", "%.1f",
-__LINE__, 7.239203871123613e+06,	"7239204", "%4.f",
-__LINE__, 7.245809072577019e-09,	"+7.245809E-09", "%+E",
-__LINE__, 7.256275686433336e+03,	"7.256276e+03", "%e",
-__LINE__, 7.265774291605193e+27,	"+7.26577E+27", "%+G",
-__LINE__, 7.287968172227119e-21,	"+7.287968e-21", "%+e",
-__LINE__, 7.306020169678527e+12,	"7E+12", "%2.E",
-__LINE__, 7.315587463572568e-04,	"0.", "%#.0f",
-__LINE__, 7.324627764547963e+09,	"7.324628E+09", "%#E",
-__LINE__, 7.331904966719081e-06,	"+7.3319E-06", "%+G",
-__LINE__, 7.334448152798243e-02,	"0.07", "%0.g",
-__LINE__, 7.334487195961240e-01,	"+0.733449", "%+#g",
-__LINE__, 7.381283575515707e+13,	"7.381284E+13", "%E",
-__LINE__, 7.394854567245476e-11,	"0.000000", "%7f",
-__LINE__, 7.401950211415377e-08,	" 7e-08", "%6.e",
-__LINE__, 7.409023867864680e+03,	"7409.023868", "%#3f",
-__LINE__, 7.411912956257733e-20,	"7e-20", "%0.g",
-__LINE__, 7.445275019272160e+11,	"744527501927.2159511", "%.7f",
-__LINE__, 7.450279765616891e-16,	"7.45028e-16", "%.6g",
-__LINE__, 7.467047411334495e+14,	"7.46705E+14", "%G",
-__LINE__, 7.485628870972725e+28,	"7E+28", "%.0G",
-__LINE__, 7.495391782588563e+11,	"749539178258.856253", "%f",
-__LINE__, 7.495824101611911e+06,	"7.49582e+06", "%.6g",
-__LINE__, 7.499759867592402e+20,	"+749975986759240154100.3", "%+.1f",
-__LINE__, 7.508983397140368e+04,	"75089.8", "%g",
-__LINE__, 7.512585199581016e-27,	"7.512585E-27", "%.6E",
-__LINE__, 7.516831372212545e-29,	"+7.516831e-29", "%+e",
-__LINE__, 7.525789465978582e+00,	"7.52579", "%G",
-__LINE__, 7.528655653725963e+06,	"7.5287e+06", "%3.4e",
-__LINE__, 7.533217421035612e+28,	"75332174210356122046050586504.861712", "%f",
-__LINE__, 7.534147071756384e+03,	"7534.15", "%g",
-__LINE__, 7.542648637430919e-25,	"+0.000000", "%+#f",
-__LINE__, 7.554380140947798e-15,	"  8e-15", "%7.g",
-__LINE__, 7.557366996007743e+25,	"  8E+25", "%7.G",
-__LINE__, 7.579228950138068e+08,	"8e+08", "%3.e",
-__LINE__, 7.579773904052487e-13,	"0.000000", "%3f",
-__LINE__, 7.580377544554059e+27,	"7.58038e+27", "%#g",
-__LINE__, 7.589615147875915e-15,	"7.59E-15", "%.3G",
-__LINE__, 7.593317194045158e-12,	"+0.", "%+#1.f",
-__LINE__, 7.605535657484387e-07,	"7.60554E-07", "%G",
-__LINE__, 7.609171121278006e-08,	"    0", "%5.f",
-__LINE__, 7.612033900317304e-14,	"7.61203e-14", "%g",
-__LINE__, 7.628040858080326e+23,	"+7.62804e+23", "%+g",
-__LINE__, 7.632109382948695e-01,	"0.763211", "%#f",
-__LINE__, 7.633415922627254e+28,	"76334159226272539910951309138.908982", "%#f",
-__LINE__, 7.636190400774419e+22,	"+7.636190E+22", "%+E",
-__LINE__, 7.636228368661314e-23,	"0.000000", "%f",
-__LINE__, 7.653292362739654e-17,	"7.65329E-17", "%#G",
-__LINE__, 7.664044705231460e+03,	"7.664045E+03", "%5E",
-__LINE__, 7.664257283149626e-05,	"7.66426E-05", "%0G",
-__LINE__, 7.668996632821614e-19,	" 0.0", "%4.1f",
-__LINE__, 7.674502669497263e-24,	"7.6745e-24", "%g",
-__LINE__, 7.681870119755193e+12,	"+7.68187e+12", "%+#g",
-__LINE__, 7.693453198401315e+02,	"769.3453198", "%5.7f",
-__LINE__, 7.705080073293603e-29,	"7.705080E-29", "%1E",
-__LINE__, 7.707244083934683e-07,	"7.71E-07", "%2.3G",
-__LINE__, 7.749445584970652e-17,	"7.75E-17", "%6.3G",
-__LINE__, 7.755369447889403e+09,	"7.8e+09", "%#4.2g",
-__LINE__, 7.760378169707072e-06,	"7.76038e-06", "%g",
-__LINE__, 7.763518882114968e-10,	"0.000000", "%f",
-__LINE__, 7.764720069569677e-18,	"0.000000", "%0f",
-__LINE__, 7.768821339438552e-03,	"0.00776882", "%g",
-__LINE__, 7.774767835990679e-29,	"7.774768E-29", "%7E",
-__LINE__, 7.805567188246987e-04,	"0.000780557", "%2G",
-__LINE__, 7.825157442935941e-26,	"0.000000", "%f",
-__LINE__, 7.833373563161910e+29,	"+783337356316190991378789476584.643126", "%+f",
-__LINE__, 7.875872661746674e-16,	"7.875873E-16", "%E",
-__LINE__, 7.880664458920439e-28,	"7.881E-28", "%#0.3E",
-__LINE__, 7.893084198630288e+18,	"7893084198630288206", "%1.f",
-__LINE__, 7.912222737877417e+04,	"79122.2", "%G",
-__LINE__, 7.913004582748724e-26,	"0.000000", "%f",
-__LINE__, 7.913749944463836e+17,	"791374994446383617.230367", "%f",
-__LINE__, 7.923881665760883e-24,	"0.000000", "%f",
-__LINE__, 7.926699779993694e-03,	"0.007927", "%5.6f",
-__LINE__, 7.941991860623354e-20,	"7.941992e-20", "%e",
-__LINE__, 7.942700358097138e+17,	"794270035809713803.587329", "%2f",
-__LINE__, 7.945451569935757e-16,	"7.94545E-16", "%#4.6G",
-__LINE__, 7.948277588625241e-04,	"0", "%.0f",
-__LINE__, 7.952265062569124e+21,	"+7.95227e+21", "%+#g",
-__LINE__, 7.959953534668040e+11,	"8e+11", "%2.e",
-__LINE__, 7.962059154424500e-22,	"7.96206E-22", "%G",
-__LINE__, 7.962856142535673e-26,	"7.9629E-26", "%#.5G",
-__LINE__, 7.966528574505771e+12,	"7.96653e+12", "%g",
-__LINE__, 8.006496880305429e-21,	"8.0065E-21", "%G",
-__LINE__, 8.023374861440542e+06,	"+8023375", "%+6.f",
-__LINE__, 8.041139717082990e-20,	"8.04114e-20", "%g",
-__LINE__, 8.044201752824126e+15,	"8.04420E+15", "%.5E",
-__LINE__, 8.044262927409321e-10,	"+8E-10", "%+2.2G",
-__LINE__, 8.058285708061202e+02,	"+8.058286e+02", "%+e",
-__LINE__, 8.104422320765144e+10,	"8.10442e+10", "%#4g",
-__LINE__, 8.104572628022330e-11,	"0.000000", "%f",
-__LINE__, 8.112156369917432e+15,	"+8.11216E+15", "%+G",
-__LINE__, 8.114566569709531e-18,	"8.11457E-18", "%G",
-__LINE__, 8.114795069552519e+13,	"8.114795E+13", "%E",
-__LINE__, 8.121382719830660e+03,	"8121.382720", "%f",
-__LINE__, 8.125179335533733e-12,	"+8.125179e-12", "%+e",
-__LINE__, 8.126383949107055e+19,	"81263839491070548604.056967", "%f",
-__LINE__, 8.129961701307842e-04,	"+0.00081", "%+5.2g",
-__LINE__, 8.143780077390936e+15,	"8.14378E+15", "%G",
-__LINE__, 8.149891507777399e+16,	"+8E+16", "%+1.G",
-__LINE__, 8.167395708830107e+03,	"8167", "%3.f",
-__LINE__, 8.167703619221975e+01,	"81.677", "%G",
-__LINE__, 8.178463030771759e+06,	"+8.17846E+06", "%+G",
-__LINE__, 8.188188531273697e+12,	"8.18819E+12", "%G",
-__LINE__, 8.189094866416537e+11,	"+8E+11", "%+.1G",
-__LINE__, 8.205086844365809e-18,	"+8.205087E-18", "%+#E",
-__LINE__, 8.205762333408320e-26,	"0.000000", "%f",
-__LINE__, 8.212370598174696e-10,	"8.2124E-10", "%.5G",
-__LINE__, 8.228054316085489e-14,	"0.000000", "%3f",
-__LINE__, 8.244313484402404e-16,	"8.24431e-16", "%g",
-__LINE__, 8.244472235472472e+19,	"8.24447E+19", "%G",
-__LINE__, 8.245421473302411e-09,	"+8.2454e-09", "%+1.5g",
-__LINE__, 8.252286626634840e-22,	"8E-22", "%3.G",
-__LINE__, 8.259969177912707e-19,	"0.000000", "%f",
-__LINE__, 8.265769991725211e+18,	"8.26577e+18", "%.5e",
-__LINE__, 8.293986939496488e+25,	"8.3E+25", "%.1E",
-__LINE__, 8.310348813512608e-23,	"+8.31035e-23", "%+g",
-__LINE__, 8.316951996533247e-20,	"0.000000", "%f",
-__LINE__, 8.318818016883803e+05,	" 8e+05", "%6.1g",
-__LINE__, 8.324896920131877e-13,	"+8.324897e-13", "%+e",
-__LINE__, 8.325228630004624e-03,	"0.0083252", "%5.7f",
-__LINE__, 8.332538660129034e+14,	"8.3e+14", "%5.2g",
-__LINE__, 8.343325212751775e+07,	"8.34333e+07", "%#4g",
-__LINE__, 8.363117398136236e+20,	"+8.36e+20", "%+.3g",
-__LINE__, 8.364181324448165e+27,	"8.36418e+27", "%#g",
-__LINE__, 8.372159259848738e+10,	"8.37216e+10", "%4g",
-__LINE__, 8.379252006152759e-26,	"8.37925e-26", "%g",
-__LINE__, 8.392670395720252e+09,	"8392670395.720252", "%f",
-__LINE__, 8.423360059147756e+05,	"+842336.", "%+#G",
-__LINE__, 8.425921213167943e+09,	"8.425921e+09", "%1.7g",
-__LINE__, 8.431664412515776e-16,	"8.43166E-16", "%#G",
-__LINE__, 8.448608859842500e+02,	"844.861", "%1.3f",
-__LINE__, 8.456292247478771e-14,	"8.45629E-14", "%G",
-__LINE__, 8.460077225296853e-04,	"0.000846008", "%G",
-__LINE__, 8.478635925746218e-10,	"0.000000", "%f",
-__LINE__, 8.492455774427448e+06,	"8.49246e+06", "%g",
-__LINE__, 8.494450528380746e-07,	"8.494451e-07", "%e",
-__LINE__, 8.516435842947605e-23,	"+0.000000", "%+1f",
-__LINE__, 8.519057789029134e-18,	"0.000000", "%0f",
-__LINE__, 8.522602111109066e+18,	" 9.e+18", "%#7.g",
-__LINE__, 8.529176788022152e-24,	"8.529E-24", "%0.4G",
-__LINE__, 8.534979605642793e-07,	"0.000001", "%f",
-__LINE__, 8.546859563634342e-07,	"8.546860E-07", "%E",
-__LINE__, 8.552370027054106e+12,	"9e+12", "%.0g",
-__LINE__, 8.561781328234041e+10,	"8.56178e+10", "%4g",
-__LINE__, 8.562688793145107e-20,	"8.562689e-20", "%1.7g",
-__LINE__, 8.573130147270046e-07,	"  9E-07", "%7.G",
-__LINE__, 8.584571984387802e-18,	"8.5846e-18", "%.5g",
-__LINE__, 8.596407996491291e+11,	"8.596408E+11", "%#E",
-__LINE__, 8.604843726850381e+10,	" 9E+10", "%6.G",
-__LINE__, 8.626884271938994e-23,	"8.62688e-23", "%g",
-__LINE__, 8.631140282429168e+24,	"8631140282429168308908629.", "%#.0f",
-__LINE__, 8.635194331917948e-16,	"8.63519E-16", "%G",
-__LINE__, 8.641417311588688e-24,	"+0.000000", "%+f",
-__LINE__, 8.649120264278466e+26,	"8.65E+26", "%1.3G",
-__LINE__, 8.649745523383894e+06,	"8.649746e+06", "%e",
-__LINE__, 8.654720740091021e+16,	"8.65472e+16", "%g",
-__LINE__, 8.655445556834509e-08,	"9e-08", "%4.g",
-__LINE__, 8.658954696751902e+06,	"8.65895E+06", "%G",
-__LINE__, 8.665712368800818e-10,	"+8.66571E-10", "%+G",
-__LINE__, 8.666937057116442e-10,	"8.666937e-10", "%e",
-__LINE__, 8.670981239765155e+05,	"867098", "%G",
-__LINE__, 8.679631934294932e-25,	"+9.E-25", "%+#0.G",
-__LINE__, 8.683595173050962e-21,	"8.68360E-21", "%#G",
-__LINE__, 8.684938704958039e+25,	"8.684939E+25", "%E",
-__LINE__, 8.686745463281227e-12,	"8.686745E-12", "%5.7G",
-__LINE__, 8.700227628706534e-12,	"8.700228e-12", "%#e",
-__LINE__, 8.705101179577200e+04,	"87051.011796", "%#2f",
-__LINE__, 8.707824829984700e-24,	"9e-24", "%.1g",
-__LINE__, 8.717654041009233e+21,	"+9E+21", "%+6.0E",
-__LINE__, 8.741736299906572e-11,	"8.74174E-11", "%#0G",
-__LINE__, 8.742228350419966e+18,	"+8742228350419965821.060941", "%+f",
-__LINE__, 8.743045146087558e-17,	"+8.74305E-17", "%+2G",
-__LINE__, 8.747820269457588e+18,	"8.74782E+18", "%G",
-__LINE__, 8.756274717008537e-28,	"8.756275E-28", "%E",
-__LINE__, 8.769782309254687e-24,	"+8.769782E-24", "%+2.6E",
-__LINE__, 8.788151659193398e-16,	" 9E-16", "%6.E",
-__LINE__, 8.789514812202340e-07,	"9E-07", "%0.G",
-__LINE__, 8.792657843164822e-07,	"8.79266e-07", "%0g",
-__LINE__, 8.810976223440985e+05,	"881097.622344", "%f",
-__LINE__, 8.822553973113614e+10,	"8.82255E+10", "%G",
-__LINE__, 8.839440421530611e-04,	"0.000883944", "%G",
-__LINE__, 8.842539073558434e-12,	"0", "%1.f",
-__LINE__, 8.882818021261782e-13,	"+8.9e-13", "%+4.2g",
-__LINE__, 8.899833909201039e+05,	"8.8998E+05", "%.5G",
-__LINE__, 8.903167498000181e-13,	"9e-13", "%0.g",
-__LINE__, 8.933727737932164e+09,	"+8933727738", "%+4.f",
-__LINE__, 8.946226267100711e+06,	"8.946E+06", "%1.4G",
-__LINE__, 8.953203780849794e-21,	"8.9532E-21", "%G",
-__LINE__, 8.959934262635649e+28,	"+8.959934e+28", "%+e",
-__LINE__, 8.969485341781558e-25,	"0.000000", "%#f",
-__LINE__, 8.970058187654221e+02,	"897.005819", "%f",
-__LINE__, 8.979846508565979e+02,	"8.979847E+02", "%E",
-__LINE__, 8.984561117901212e+01,	"8.984561E+01", "%E",
-__LINE__, 8.992157765875611e-12,	"8.99216e-12", "%g",
-__LINE__, 9.004487016708012e+01,	"9.004487e+01", "%#e",
-__LINE__, 9.007306978283218e-24,	"9.007307e-24", "%e",
-__LINE__, 9.014546375043562e+17,	"901454637504356171.007203", "%#3f",
-__LINE__, 9.028177786002161e-12,	"9.02818E-12", "%G",
-__LINE__, 9.029635986381795e-02,	"0.09", "%.1g",
-__LINE__, 9.032389962233431e-07,	"+0.000001", "%+f",
-__LINE__, 9.038466945070887e+10,	"+9.038467E+10", "%+E",
-__LINE__, 9.040166964322772e-27,	"9.04017e-27", "%g",
-__LINE__, 9.044627673694681e-11,	"9.04463E-11", "%G",
-__LINE__, 9.045906217628948e+17,	"904590621762894819.823941", "%1f",
-__LINE__, 9.051764975661710e+11,	"9.05176e+11", "%#g",
-__LINE__, 9.053142913711405e+29,	"9.053143e+29", "%#e",
-__LINE__, 9.073185209160657e-19,	"+9.07319e-19", "%+g",
-__LINE__, 9.074372574441451e+02,	"907.437", "%g",
-__LINE__, 9.084624602048136e+08,	"9.084625E+08", "%E",
-__LINE__, 9.088839346363631e+18,	"9.09e+18", "%.2e",
-__LINE__, 9.091945159170871e-15,	"9.09195e-15", "%5g",
-__LINE__, 9.115304318083716e+10,	"9.115304e+10", "%e",
-__LINE__, 9.115978352902710e+28,	"9.11598E+28", "%G",
-__LINE__, 9.121415008221017e-17,	"9.E-17", "%#6.G",
-__LINE__, 9.127270978060388e+18,	"9.E+18", "%#5.G",
-__LINE__, 9.143941729069086e+08,	"9.143942E+08", "%#E",
-__LINE__, 9.162740105978580e-19,	" 9.E-19", "%#7.G",
-__LINE__, 9.221509957559626e-18,	"9.22151e-18", "%g",
-__LINE__, 9.227419774250317e-28,	" 0.", "%#3.f",
-__LINE__, 9.230846660807540e-21,	"0.000000", "%f",
-__LINE__, 9.238091727277130e-06,	"+0.00001", "%+.5f",
-__LINE__, 9.244337357684406e+10,	"9E+10", "%5.G",
-__LINE__, 9.259179793993285e-19,	"  9E-19", "%7.0G",
-__LINE__, 9.274068541525759e-17,	"9.274069e-17", "%e",
-__LINE__, 9.283833535882367e+16,	"9.28383e+16", "%#g",
-__LINE__, 9.295693096364605e+11,	"+9.295693E+11", "%+E",
-__LINE__, 9.301820438602407e+05,	"930182", "%G",
-__LINE__, 9.322805251555376e-29,	"9e-29", "%1.e",
-__LINE__, 9.358443042421307e-27,	"9.35844e-27", "%g",
-__LINE__, 9.372658444745124e-23,	"9.372658e-23", "%e",
-__LINE__, 9.380302971355292e+05,	"938030.3", "%.7g",
-__LINE__, 9.381976354968076e-26,	"+9.382E-26", "%+5.4G",
-__LINE__, 9.391072061980585e-15,	"9.391072E-15", "%E",
-__LINE__, 9.403554117166546e-06,	"0.000009", "%f",
-__LINE__, 9.403712900426614e-28,	"9.40371e-28", "%g",
-__LINE__, 9.419046629820578e+03,	"9419.046630", "%f",
-__LINE__, 9.422344695378412e+22,	"94223446953784115720509.362291", "%f",
-__LINE__, 9.433327680467576e+01,	"9.433328e+01", "%e",
-__LINE__, 9.443975205260596e+20,	"9.44398e+20", "%g",
-__LINE__, 9.445134851965593e-04,	"+9.445135E-04", "%+E",
-__LINE__, 9.448403585149890e+24,	"9e+24", "%0.g",
-__LINE__, 9.463149430113036e+18,	"9.46315e+18", "%g",
-__LINE__, 9.465735160722534e+27,	"+9465735160722534402566452627.070248", "%+f",
-__LINE__, 9.495210794344892e-04,	"0.000950", "%f",
-__LINE__, 9.501916506373814e-25,	"9.50192E-25", "%#G",
-__LINE__, 9.514641335897739e+29,	"9.51464E+29", "%G",
-__LINE__, 9.524633436992819e-04,	" 0.001", "%6.G",
-__LINE__, 9.530925101873022e-18,	"9.530925e-18", "%2e",
-__LINE__, 9.557903833216979e-22,	"9.557904E-22", "%E",
-__LINE__, 9.587709102390903e-01,	" 1", "%2.f",
-__LINE__, 9.592723000828453e-02,	"9.592723E-02", "%5E",
-__LINE__, 9.603430008794172e+27,	"9.60343e+27", "%g",
-__LINE__, 9.622648414989433e-18,	"9.622648e-18", "%1e",
-__LINE__, 9.633326171289319e-23,	"9.633326e-23", "%e",
-__LINE__, 9.662064616152408e+19,	"96620646161524081918.5146393", "%1.7f",
-__LINE__, 9.668544846563163e-23,	"9.668545e-23", "%e",
-__LINE__, 9.691014191346685e+28,	"9.69101E+28", "%G",
-__LINE__, 9.693075414840598e+02,	"+969.308", "%+G",
-__LINE__, 9.695013453291907e-30,	"9.695013e-30", "%5e",
-__LINE__, 9.705983477801926e-24,	"9.70598e-24", "%g",
-__LINE__, 9.709022568030226e-17,	"0.000000", "%f",
-__LINE__, 9.715194901854826e+20,	"9.715195e+20", "%e",
-__LINE__, 9.721011821337717e+16,	"1E+17", "%0.G",
-__LINE__, 9.734895542899672e+14,	"9.734896e+14", "%e",
-__LINE__, 9.741486438769710e-29,	" 1e-28", "%6.g",
-__LINE__, 9.766657482315475e-24,	"9.76666E-24", "%7G",
-__LINE__, 9.767283293054552e-02,	"0.09767", "%5.5f",
-__LINE__, 9.769553159146005e-20,	"9.76955E-20", "%G",
-__LINE__, 9.777220880605434e-10,	"0.00", "%4.2f",
-__LINE__, 9.790290569034575e+20,	"979029056903457473027.", "%#6.f",
-__LINE__, 9.793128245822718e-01,	"0.979313", "%G",
-__LINE__, 9.804758536498200e+08,	"980475853.650", "%.3f",
-__LINE__, 9.816883664191066e-02,	"0.1", "%.0g",
-__LINE__, 9.836109821010300e+25,	"9.83611e+25", "%g",
-__LINE__, 9.846197559631225e+03,	"1E+04", "%2.G",
-__LINE__, 9.863289416819924e+12,	"9.86329e+12", "%g",
-__LINE__, 9.865893798657353e+12,	"9.866e+12", "%0.4g",
-__LINE__, 9.868248446640862e-15,	"0.000000", "%#f",
-__LINE__, 9.869973080775134e+04,	"98699.7", "%G",
-__LINE__, 9.899444006312953e+20,	"1E+21", "%.1G",
-__LINE__, 9.904083146074285e-08,	"9.904083e-08", "%6e",
-__LINE__, 9.909790408255471e+15,	"9909790408255471.305665", "%f",
-__LINE__, 9.930297455798394e-13,	"+9.930297E-13", "%+5.6E",
-__LINE__, 9.933314448709083e-15,	"9.93331E-15", "%#.6G",
-__LINE__, 9.938714530509870e+29,	"9.938715e+29", "%e",
-__LINE__, 9.953892603540162e+07,	"9.95389E+07", "%G",
-__LINE__, 9.962084643867200e+14,	"+996208464386720.038419", "%+f",
-__LINE__, 9.977706708809947e-09,	"9.9777E-09", "%#.4E",
-#endif
-__LINE__, 9.978034352999867e+15,	"9.978034e+15", "%2.6e",
-__LINE__, 9.998315286730175e-30,	"9.998315e-30", "%6e",
-0
-};
diff --git a/newlib/libm/test/sqrt_vec.c b/newlib/libm/test/sqrt_vec.c
deleted file mode 100644
index 49bef146d..000000000
--- a/newlib/libm/test/sqrt_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type sqrt_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3e60c357, 0x8c15393e, 0x3cd19000, 0x00000000},			/* 3.12236e-08=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3fb99999, 0x99999af9, 0x3f847ae1, 0x47ae16ad},			/* 0.10000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3fc21a18, 0x51ff6386, 0x3f947ae1, 0x47ae1594},			/* 0.14142=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3fc62b95, 0x86ad0a88, 0x3f9eb851, 0xeb851fd2},			/* 0.17320=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fc99999, 0x999999f2, 0x3fa47ae1, 0x47ae1508},			/* 0.20000=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fcc9f25, 0xc5bfee28, 0x3fa99999, 0x99999a27},			/* 0.22360=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3fcf5a7c, 0xecdb6892, 0x3faeb851, 0xeb851f46},			/* 0.24494=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fd0eecc, 0x87dbfa76, 0x3fb1eb85, 0x1eb85232},			/* 0.26457=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fd21a18, 0x51ff6329, 0x3fb47ae1, 0x47ae14c1},			/* 0.28284=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fd33333, 0x33333350, 0x3fb70a3d, 0x70a3d750},			/* 0.30000=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fd43d13, 0x6248492a, 0x3fb99999, 0x999999df},			/* 0.31622=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fd539f5, 0x433125de, 0x3fbc28f5, 0xc28f5c6e},			/* 0.33166=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fd62b95, 0x86ad0a3a, 0x3fbeb851, 0xeb851efd},			/* 0.34641=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fd71355, 0xd04de1a7, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.36055=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fd7f254, 0xdab9cc52, 0x3fc1eb85, 0x1eb8520e},			/* 0.37416=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fd8c97e, 0xf43f725e, 0x3fc33333, 0x33333356},			/* 0.38729=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fd99999, 0x999999b0, 0x3fc47ae1, 0x47ae149e},			/* 0.40000=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fda634b, 0xd77fe1ba, 0x3fc5c28f, 0x5c28f5e6},			/* 0.41231=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fdb2724, 0x7aff14a4, 0x3fc70a3d, 0x70a3d72e},			/* 0.42426=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fdbe59e, 0xba3a166f, 0x3fc851eb, 0x851eb876},			/* 0.43588=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fdc9f25, 0xc5bfedee, 0x3fc99999, 0x999999be},			/* 0.44721=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fdd5417, 0x8e8830e9, 0x3fcae147, 0xae147b06},			/* 0.45825=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fde04c6, 0xf553bdec, 0x3fcc28f5, 0xc28f5c4e},			/* 0.46904=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fdeb17d, 0x88be6d04, 0x3fcd70a3, 0xd70a3d96},			/* 0.47958=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fdf5a7c, 0xecdb685e, 0x3fceb851, 0xeb851ede},			/* 0.48989=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fe00000, 0x0000000a, 0x3fd00000, 0x00000013},			/* 0.50000=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fe0511d, 0xe5a82668, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.50990=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fe0a0b0, 0x2501c7a3, 0x3fd147ae, 0x147ae15b},			/* 0.51961=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fe0eecc, 0x87dbfa5e, 0x3fd1eb85, 0x1eb851ff},			/* 0.52915=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fe13b86, 0xea20ae66, 0x3fd28f5c, 0x28f5c2a3},			/* 0.53851=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fe186f1, 0x74f8847c, 0x3fd33333, 0x33333347},			/* 0.54772=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fe1d11c, 0xd1209b0c, 0x3fd3d70a, 0x3d70a3eb},			/* 0.55677=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fe21a18, 0x51ff6313, 0x3fd47ae1, 0x47ae148f},			/* 0.56568=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fe261f2, 0x1ab573fc, 0x3fd51eb8, 0x51eb8533},			/* 0.57445=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fe2a8b7, 0x3e294fbe, 0x3fd5c28f, 0x5c28f5d7},			/* 0.58309=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fe2ee73, 0xdadc9b60, 0x3fd66666, 0x6666667b},			/* 0.59160=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fe33333, 0x3333333c, 0x3fd70a3d, 0x70a3d71f},			/* 0.60000=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fe376ff, 0xc2b649d0, 0x3fd7ae14, 0x7ae147c3},			/* 0.60827=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fe3b9e3, 0x50c59eb6, 0x3fd851eb, 0x851eb867},			/* 0.61644=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fe3fbe7, 0x01157610, 0x3fd8f5c2, 0x8f5c290b},			/* 0.62449=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fe43d13, 0x62484918, 0x3fd99999, 0x999999af},			/* 0.63245=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fe47d70, 0x7ae665a2, 0x3fda3d70, 0xa3d70a53},			/* 0.64031=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fe4bd05, 0xd4eb41f2, 0x3fdae147, 0xae147af7},			/* 0.64807=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fe4fbda, 0x8817b456, 0x3fdb851e, 0xb851eb9b},			/* 0.65574=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fe539f5, 0x433125cc, 0x3fdc28f5, 0xc28f5c3f},			/* 0.66332=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fe5775c, 0x544ff26b, 0x3fdccccc, 0xcccccce3},			/* 0.67082=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fe5b415, 0xb05a4024, 0x3fdd70a3, 0xd70a3d87},			/* 0.67823=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fe5f026, 0xf9c4765a, 0x3fde147a, 0xe147ae2b},			/* 0.68556=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fe62b95, 0x86ad0a2a, 0x3fdeb851, 0xeb851ecf},			/* 0.69282=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fe66666, 0x6666666e, 0x3fdf5c28, 0xf5c28f73},			/* 0.70000=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe6a09e, 0x667f3bd4, 0x3fe00000, 0x0000000b},			/* 0.70710=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe6da42, 0x17576979, 0x3fe051eb, 0x851eb85d},			/* 0.71414=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe71355, 0xd04de197, 0x3fe0a3d7, 0x0a3d70af},			/* 0.72111=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe74bdd, 0xb3926328, 0x3fe0f5c2, 0x8f5c2901},			/* 0.72801=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe783dd, 0xb1a48e40, 0x3fe147ae, 0x147ae153},			/* 0.73484=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe7bb59, 0x8c88b4b4, 0x3fe19999, 0x999999a5},			/* 0.74161=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe7f254, 0xdab9cc42, 0x3fe1eb85, 0x1eb851f7},			/* 0.74833=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe828d3, 0x09df0c51, 0x3fe23d70, 0xa3d70a49},			/* 0.75498=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe85ed7, 0x614b0394, 0x3fe28f5c, 0x28f5c29b},			/* 0.76157=f(0.58000)*/
-{64, 0,123,__LINE__, 0x3fe89465, 0x04494bea, 0x3fe2e147, 0xae147aed},			/* 0.76811=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe8c97e, 0xf43f7250, 0x3fe33333, 0x3333333f},			/* 0.77459=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe8fe28, 0x12a529f5, 0x3fe3851e, 0xb851eb91},			/* 0.78102=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe93263, 0x22d7727c, 0x3fe3d70a, 0x3d70a3e3},			/* 0.78740=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe96632, 0xcbc9f786, 0x3fe428f5, 0xc28f5c35},			/* 0.79372=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe99999, 0x999999a1, 0x3fe47ae1, 0x47ae1487},			/* 0.80000=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe9cc99, 0xff02c488, 0x3fe4cccc, 0xccccccd9},			/* 0.80622=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe9ff36, 0x56bdf34e, 0x3fe51eb8, 0x51eb852b},			/* 0.81240=f(0.66000)*/
-{64, 0,123,__LINE__, 0x3fea3170, 0xe4c4874c, 0x3fe570a3, 0xd70a3d7d},			/* 0.81853=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fea634b, 0xd77fe1ac, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82462=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fea94c9, 0x48e48016, 0x3fe6147a, 0xe147ae21},			/* 0.83066=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3feac5eb, 0x3f7ab300, 0x3fe66666, 0x66666673},			/* 0.83666=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3feaf6b3, 0xaf565e77, 0x3fe6b851, 0xeb851ec5},			/* 0.84261=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3feb2724, 0x7aff1496, 0x3fe70a3d, 0x70a3d717},			/* 0.84852=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3feb573f, 0x7449baa6, 0x3fe75c28, 0xf5c28f69},			/* 0.85440=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3feb8706, 0x5d24ceeb, 0x3fe7ae14, 0x7ae147bb},			/* 0.86023=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3febb67a, 0xe8584cb2, 0x3fe80000, 0x0000000d},			/* 0.86602=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3febe59e, 0xba3a1662, 0x3fe851eb, 0x851eb85f},			/* 0.87177=f(0.76000)*/
-{64, 0,123,__LINE__, 0x3fec1473, 0x6957b972, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.87749=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fec42fa, 0x7f164e74, 0x3fe8f5c2, 0x8f5c2903},			/* 0.88317=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fec7135, 0x78492721, 0x3fe947ae, 0x147ae155},			/* 0.88881=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fec9f25, 0xc5bfede0, 0x3fe99999, 0x999999a7},			/* 0.89442=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3feccccc, 0xccccccd4, 0x3fe9eb85, 0x1eb851f9},			/* 0.90000=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fecfa2b, 0xe7c326a7, 0x3fea3d70, 0xa3d70a4b},			/* 0.90553=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fed2744, 0x666f6047, 0x3fea8f5c, 0x28f5c29d},			/* 0.91104=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fed5417, 0x8e8830dc, 0x3feae147, 0xae147aef},			/* 0.91651=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3fed80a6, 0x9c19e432, 0x3feb3333, 0x33333341},			/* 0.92195=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fedacf2, 0xc1ebf38e, 0x3feb851e, 0xb851eb93},			/* 0.92736=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fedd8fd, 0x29e15177, 0x3febd70a, 0x3d70a3e5},			/* 0.93273=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fee04c6, 0xf553bddf, 0x3fec28f5, 0xc28f5c37},			/* 0.93808=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3fee3051, 0x3d6a720a, 0x3fec7ae1, 0x47ae1489},			/* 0.94339=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fee5b9d, 0x136c6d9e, 0x3feccccc, 0xccccccdb},			/* 0.94868=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fee86ab, 0x810ea91a, 0x3fed1eb8, 0x51eb852d},			/* 0.95393=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3feeb17d, 0x88be6cf8, 0x3fed70a3, 0xd70a3d7f},			/* 0.95916=f(0.92000)*/
-{64, 0,123,__LINE__, 0x3feedc14, 0x25e8086e, 0x3fedc28f, 0x5c28f5d1},			/* 0.96436=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fef0670, 0x4d3a1e77, 0x3fee147a, 0xe147ae23},			/* 0.96953=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fef3092, 0xece5bc3d, 0x3fee6666, 0x66666675},			/* 0.97467=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fef5a7c, 0xecdb6852, 0x3feeb851, 0xeb851ec7},			/* 0.97979=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fef842f, 0x2f05570c, 0x3fef0a3d, 0x70a3d719},			/* 0.98488=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fefadaa, 0x8f7eed59, 0x3fef5c28, 0xf5c28f6b},			/* 0.98994=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fefd6ef, 0xe4c9b8ac, 0x3fefae14, 0x7ae147bd},			/* 0.99498=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000004, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{64, 0,123,__LINE__, 0x3ff0146d, 0xd68287f7, 0x3ff028f5, 0xc28f5c30},			/* 1.00498=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3ff028c1, 0xd959b066, 0x3ff051eb, 0x851eb859},			/* 1.00995=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ff03cfc, 0x69845aac, 0x3ff07ae1, 0x47ae1482},			/* 1.01488=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3ff0511d, 0xe5a82662, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.01980=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ff06526, 0xaa25a13e, 0x3ff0cccc, 0xccccccd4},			/* 1.02469=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3ff07917, 0x112b9a0a, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.02956=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3ff08cef, 0x72c9a20a, 0x3ff11eb8, 0x51eb8526},			/* 1.03440=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3ff0a0b0, 0x2501c79d, 0x3ff147ae, 0x147ae14f},			/* 1.03923=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3ff0b459, 0x7bd99430, 0x3ff170a3, 0xd70a3d78},			/* 1.04403=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3ff0c7eb, 0xc96a56f9, 0x3ff19999, 0x999999a1},			/* 1.04880=f(1.10000)*/
-{64, 0,123,__LINE__, 0x3ff0db67, 0x5df0c584, 0x3ff1c28f, 0x5c28f5ca},			/* 1.05356=f(1.11000)*/
-{64, 0,123,__LINE__, 0x3ff0eecc, 0x87dbfa58, 0x3ff1eb85, 0x1eb851f3},			/* 1.05830=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3ff1021b, 0x93dbd9c8, 0x3ff2147a, 0xe147ae1c},			/* 1.06301=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3ff11554, 0xcceee44c, 0x3ff23d70, 0xa3d70a45},			/* 1.06770=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3ff12878, 0x7c6f7d7e, 0x3ff26666, 0x6666666e},			/* 1.07238=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3ff13b86, 0xea20ae60, 0x3ff28f5c, 0x28f5c297},			/* 1.07703=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3ff14e80, 0x5c3a692f, 0x3ff2b851, 0xeb851ec0},			/* 1.08166=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3ff16165, 0x177554b2, 0x3ff2e147, 0xae147ae9},			/* 1.08627=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3ff17435, 0x5f1624a2, 0x3ff30a3d, 0x70a3d712},			/* 1.09087=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{64, 0,123,__LINE__, 0x3ff40d93, 0x1ff62706, 0x3ff921fb, 0x54442d18},			/* 1.25331=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3ffc5bf8, 0x91b4ef6a, 0x400921fb, 0x54442d18},			/* 1.77245=f(3.14159)*/
-{64, 0,123,__LINE__, 0x40015dce, 0x5d1822cc, 0x4012d97c, 0x7f3321d2},			/* 2.17080=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe8c97e, 0xf43f721a, 0x3fe33333, 0x333332ec},			/* 0.77459=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3ff843e4, 0x3d85e5a6, 0x40026666, 0x66666654},			/* 1.51657=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3fffffff, 0xfffffff7, 0x400fffff, 0xffffffee},			/* 2.00000=f(4.00000)*/
-{64, 0,123,__LINE__, 0x40031988, 0x71a0e80a, 0x4016cccc, 0xccccccc4},			/* 2.38746=f(5.70000)*/
-{64, 0,123,__LINE__, 0x4005c329, 0x8dd40b22, 0x401d9999, 0x99999991},			/* 2.72029=f(7.40000)*/
-{64, 0,123,__LINE__, 0x40082209, 0xfea1fd35, 0x40223333, 0x3333332f},			/* 3.01662=f(9.10000)*/
-{64, 0,123,__LINE__, 0x400a4a6a, 0x2f74c6a8, 0x40259999, 0x99999995},			/* 3.28633=f(10.8000)*/
-{64, 0,123,__LINE__, 0x400c48c6, 0x001f0abd, 0x4028ffff, 0xfffffffb},			/* 3.53553=f(12.5000)*/
-{64, 0,123,__LINE__, 0x400e2574, 0x90a1c701, 0x402c6666, 0x66666661},			/* 3.76828=f(14.2000)*/
-{64, 0,123,__LINE__, 0x400fe65c, 0x20bc6144, 0x402fcccc, 0xccccccc7},			/* 3.98748=f(15.9000)*/
-{64, 0,123,__LINE__, 0x4010c7eb, 0xc96a56f4, 0x40319999, 0x99999997},			/* 4.19523=f(17.6000)*/
-{64, 0,123,__LINE__, 0x4011929c, 0xde1931e4, 0x40334ccc, 0xccccccca},			/* 4.39317=f(19.3000)*/
-{64, 0,123,__LINE__, 0x4012548e, 0xb9151e84, 0x4034ffff, 0xfffffffd},			/* 4.58257=f(21.0000)*/
-{64, 0,123,__LINE__, 0x40130ecc, 0x6d288adc, 0x4036b333, 0x33333330},			/* 4.76445=f(22.7000)*/
-{64, 0,123,__LINE__, 0x4013c22f, 0xd6a2b7b0, 0x40386666, 0x66666663},			/* 4.93963=f(24.4000)*/
-{64, 0,123,__LINE__, 0x40146f6d, 0x70171f62, 0x403a1999, 0x99999996},			/* 5.10881=f(26.1000)*/
-{64, 0,123,__LINE__, 0x4015171c, 0xbaaadfe0, 0x403bcccc, 0xccccccc9},			/* 5.27257=f(27.8000)*/
-{64, 0,123,__LINE__, 0x4015b9be, 0x5d52a9d8, 0x403d7fff, 0xfffffffc},			/* 5.43139=f(29.5000)*/
-0,};
-test_sqrt(m)   {run_vector_1(m,sqrt_vec,(char *)(sqrt),"sqrt","dd");   }	
diff --git a/newlib/libm/test/sqrtf_vec.c b/newlib/libm/test/sqrtf_vec.c
deleted file mode 100644
index 0e52fac0f..000000000
--- a/newlib/libm/test/sqrtf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type sqrtf_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3e60c357, 0x80000000, 0x3cd19000, 0x00000000},			/* 3.12236e-08=f(9.74915e-16)*/
-{ 9, 0,123,__LINE__, 0x3fb99999, 0xa0000000, 0x3f847ae1, 0x47ae16ad},			/* 0.10000=f(0.01000)*/
-{12, 0,123,__LINE__, 0x3fc21a18, 0x40000000, 0x3f947ae1, 0x47ae1594},			/* 0.14142=f(0.02000)*/
-{12, 0,123,__LINE__, 0x3fc62b95, 0x80000000, 0x3f9eb851, 0xeb851fd2},			/* 0.17320=f(0.03000)*/
-{11, 0,123,__LINE__, 0x3fc99999, 0xa0000000, 0x3fa47ae1, 0x47ae1508},			/* 0.20000=f(0.04000)*/
-{11, 0,123,__LINE__, 0x3fcc9f25, 0xc0000000, 0x3fa99999, 0x99999a27},			/* 0.22360=f(0.05000)*/
-{11, 0,123,__LINE__, 0x3fcf5a7c, 0xe0000000, 0x3faeb851, 0xeb851f46},			/* 0.24494=f(0.06000)*/
-{13, 0,123,__LINE__, 0x3fd0eecc, 0x80000000, 0x3fb1eb85, 0x1eb85232},			/* 0.26457=f(0.07000)*/
-{12, 0,123,__LINE__, 0x3fd21a18, 0x40000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.28284=f(0.08000)*/
-{12, 0,123,__LINE__, 0x3fd33333, 0x40000000, 0x3fb70a3d, 0x70a3d750},			/* 0.30000=f(0.09000)*/
-{12, 0,123,__LINE__, 0x3fd43d13, 0x60000000, 0x3fb99999, 0x999999df},			/* 0.31622=f(0.10000)*/
-{12, 0,123,__LINE__, 0x3fd539f5, 0x40000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.33166=f(0.11000)*/
-{12, 0,123,__LINE__, 0x3fd62b95, 0x80000000, 0x3fbeb851, 0xeb851efd},			/* 0.34641=f(0.12000)*/
-{12, 0,123,__LINE__, 0x3fd71355, 0xc0000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.36055=f(0.13000)*/
-{12, 0,123,__LINE__, 0x3fd7f254, 0xe0000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.37416=f(0.14000)*/
-{10, 0,123,__LINE__, 0x3fd8c97f, 0x00000000, 0x3fc33333, 0x33333356},			/* 0.38729=f(0.15000)*/
-{10, 0,123,__LINE__, 0x3fd99999, 0xa0000000, 0x3fc47ae1, 0x47ae149e},			/* 0.40000=f(0.16000)*/
-{10, 0,123,__LINE__, 0x3fda634b, 0xe0000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.41231=f(0.17000)*/
-{10, 0,123,__LINE__, 0x3fdb2724, 0x80000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.42426=f(0.18000)*/
-{10, 0,123,__LINE__, 0x3fdbe59e, 0xc0000000, 0x3fc851eb, 0x851eb876},			/* 0.43588=f(0.19000)*/
-{10, 0,123,__LINE__, 0x3fdc9f25, 0xc0000000, 0x3fc99999, 0x999999be},			/* 0.44721=f(0.20000)*/
-{10, 0,123,__LINE__, 0x3fdd5417, 0x80000000, 0x3fcae147, 0xae147b06},			/* 0.45825=f(0.21000)*/
-{10, 0,123,__LINE__, 0x3fde04c7, 0x00000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.46904=f(0.22000)*/
-{10, 0,123,__LINE__, 0x3fdeb17d, 0x80000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.47958=f(0.23000)*/
-{10, 0,123,__LINE__, 0x3fdf5a7c, 0xe0000000, 0x3fceb851, 0xeb851ede},			/* 0.48989=f(0.24000)*/
-{13, 0,123,__LINE__, 0x3fe00000, 0x00000000, 0x3fd00000, 0x00000013},			/* 0.50000=f(0.25000)*/
-{13, 0,123,__LINE__, 0x3fe0511d, 0xe0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.50990=f(0.26000)*/
-{13, 0,123,__LINE__, 0x3fe0a0b0, 0x20000000, 0x3fd147ae, 0x147ae15b},			/* 0.51961=f(0.27000)*/
-{13, 0,123,__LINE__, 0x3fe0eecc, 0x80000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.52915=f(0.28000)*/
-{12, 0,123,__LINE__, 0x3fe13b86, 0xe0000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.53851=f(0.29000)*/
-{12, 0,123,__LINE__, 0x3fe186f1, 0x80000000, 0x3fd33333, 0x33333347},			/* 0.54772=f(0.30000)*/
-{12, 0,123,__LINE__, 0x3fe1d11c, 0xe0000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.55677=f(0.31000)*/
-{12, 0,123,__LINE__, 0x3fe21a18, 0x40000000, 0x3fd47ae1, 0x47ae148f},			/* 0.56568=f(0.32000)*/
-{12, 0,123,__LINE__, 0x3fe261f2, 0x20000000, 0x3fd51eb8, 0x51eb8533},			/* 0.57445=f(0.33000)*/
-{12, 0,123,__LINE__, 0x3fe2a8b7, 0x40000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.58309=f(0.34000)*/
-{12, 0,123,__LINE__, 0x3fe2ee73, 0xe0000000, 0x3fd66666, 0x6666667b},			/* 0.59160=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3fe33333, 0x40000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.60000=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3fe376ff, 0xc0000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.60827=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fe3b9e3, 0x40000000, 0x3fd851eb, 0x851eb867},			/* 0.61644=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3fe3fbe7, 0x00000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.62449=f(0.39000)*/
-{12, 0,123,__LINE__, 0x3fe43d13, 0x60000000, 0x3fd99999, 0x999999af},			/* 0.63245=f(0.40000)*/
-{12, 0,123,__LINE__, 0x3fe47d70, 0x80000000, 0x3fda3d70, 0xa3d70a53},			/* 0.64031=f(0.41000)*/
-{12, 0,123,__LINE__, 0x3fe4bd05, 0xc0000000, 0x3fdae147, 0xae147af7},			/* 0.64807=f(0.42000)*/
-{12, 0,123,__LINE__, 0x3fe4fbda, 0x80000000, 0x3fdb851e, 0xb851eb9b},			/* 0.65574=f(0.43000)*/
-{12, 0,123,__LINE__, 0x3fe539f5, 0x40000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.66332=f(0.44000)*/
-{12, 0,123,__LINE__, 0x3fe5775c, 0x40000000, 0x3fdccccc, 0xcccccce3},			/* 0.67082=f(0.45000)*/
-{12, 0,123,__LINE__, 0x3fe5b415, 0xc0000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.67823=f(0.46000)*/
-{12, 0,123,__LINE__, 0x3fe5f027, 0x00000000, 0x3fde147a, 0xe147ae2b},			/* 0.68556=f(0.47000)*/
-{12, 0,123,__LINE__, 0x3fe62b95, 0x80000000, 0x3fdeb851, 0xeb851ecf},			/* 0.69282=f(0.48000)*/
-{12, 0,123,__LINE__, 0x3fe66666, 0x60000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.69999=f(0.49000)*/
-{12, 0,123,__LINE__, 0x3fe6a09e, 0x60000000, 0x3fe00000, 0x0000000b},			/* 0.70710=f(0.50000)*/
-{12, 0,123,__LINE__, 0x3fe6da42, 0x20000000, 0x3fe051eb, 0x851eb85d},			/* 0.71414=f(0.51000)*/
-{12, 0,123,__LINE__, 0x3fe71355, 0xc0000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.72111=f(0.52000)*/
-{12, 0,123,__LINE__, 0x3fe74bdd, 0xa0000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.72801=f(0.53000)*/
-{12, 0,123,__LINE__, 0x3fe783dd, 0xc0000000, 0x3fe147ae, 0x147ae153},			/* 0.73484=f(0.54000)*/
-{12, 0,123,__LINE__, 0x3fe7bb59, 0xa0000000, 0x3fe19999, 0x999999a5},			/* 0.74161=f(0.55000)*/
-{12, 0,123,__LINE__, 0x3fe7f254, 0xe0000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.74833=f(0.56000)*/
-{11, 0,123,__LINE__, 0x3fe828d3, 0x00000000, 0x3fe23d70, 0xa3d70a49},			/* 0.75498=f(0.57000)*/
-{11, 0,123,__LINE__, 0x3fe85ed7, 0x60000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.76157=f(0.58000)*/
-{11, 0,123,__LINE__, 0x3fe89465, 0x00000000, 0x3fe2e147, 0xae147aed},			/* 0.76811=f(0.59000)*/
-{11, 0,123,__LINE__, 0x3fe8c97f, 0x00000000, 0x3fe33333, 0x3333333f},			/* 0.77459=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3fe8fe28, 0x20000000, 0x3fe3851e, 0xb851eb91},			/* 0.78102=f(0.61000)*/
-{11, 0,123,__LINE__, 0x3fe93263, 0x20000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.78740=f(0.62000)*/
-{11, 0,123,__LINE__, 0x3fe96632, 0xc0000000, 0x3fe428f5, 0xc28f5c35},			/* 0.79372=f(0.63000)*/
-{11, 0,123,__LINE__, 0x3fe99999, 0xa0000000, 0x3fe47ae1, 0x47ae1487},			/* 0.80000=f(0.64000)*/
-{11, 0,123,__LINE__, 0x3fe9cc9a, 0x00000000, 0x3fe4cccc, 0xccccccd9},			/* 0.80622=f(0.65000)*/
-{11, 0,123,__LINE__, 0x3fe9ff36, 0x60000000, 0x3fe51eb8, 0x51eb852b},			/* 0.81240=f(0.66000)*/
-{11, 0,123,__LINE__, 0x3fea3170, 0xe0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.81853=f(0.67000)*/
-{11, 0,123,__LINE__, 0x3fea634b, 0xe0000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.82462=f(0.68000)*/
-{11, 0,123,__LINE__, 0x3fea94c9, 0x40000000, 0x3fe6147a, 0xe147ae21},			/* 0.83066=f(0.69000)*/
-{11, 0,123,__LINE__, 0x3feac5eb, 0x40000000, 0x3fe66666, 0x66666673},			/* 0.83666=f(0.70000)*/
-{11, 0,123,__LINE__, 0x3feaf6b3, 0xa0000000, 0x3fe6b851, 0xeb851ec5},			/* 0.84261=f(0.71000)*/
-{11, 0,123,__LINE__, 0x3feb2724, 0x80000000, 0x3fe70a3d, 0x70a3d717},			/* 0.84852=f(0.72000)*/
-{11, 0,123,__LINE__, 0x3feb573f, 0x80000000, 0x3fe75c28, 0xf5c28f69},			/* 0.85440=f(0.73000)*/
-{11, 0,123,__LINE__, 0x3feb8706, 0x60000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.86023=f(0.74000)*/
-{11, 0,123,__LINE__, 0x3febb67a, 0xe0000000, 0x3fe80000, 0x0000000d},			/* 0.86602=f(0.75000)*/
-{11, 0,123,__LINE__, 0x3febe59e, 0xc0000000, 0x3fe851eb, 0x851eb85f},			/* 0.87177=f(0.76000)*/
-{11, 0,123,__LINE__, 0x3fec1473, 0x60000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.87749=f(0.77000)*/
-{11, 0,123,__LINE__, 0x3fec42fa, 0x80000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.88317=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3fec7135, 0x80000000, 0x3fe947ae, 0x147ae155},			/* 0.88881=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3fec9f25, 0xc0000000, 0x3fe99999, 0x999999a7},			/* 0.89442=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3feccccc, 0xc0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.89999=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3fecfa2b, 0xe0000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.90553=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3fed2744, 0x60000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.91104=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3fed5417, 0x80000000, 0x3feae147, 0xae147aef},			/* 0.91651=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3fed80a6, 0xa0000000, 0x3feb3333, 0x33333341},			/* 0.92195=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3fedacf2, 0xc0000000, 0x3feb851e, 0xb851eb93},			/* 0.92736=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3fedd8fd, 0x20000000, 0x3febd70a, 0x3d70a3e5},			/* 0.93273=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3fee04c7, 0x00000000, 0x3fec28f5, 0xc28f5c37},			/* 0.93808=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3fee3051, 0x40000000, 0x3fec7ae1, 0x47ae1489},			/* 0.94339=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3fee5b9d, 0x00000000, 0x3feccccc, 0xccccccdb},			/* 0.94868=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3fee86ab, 0x80000000, 0x3fed1eb8, 0x51eb852d},			/* 0.95393=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3feeb17d, 0x80000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.95916=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3feedc14, 0x20000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.96436=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3fef0670, 0x40000000, 0x3fee147a, 0xe147ae23},			/* 0.96953=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3fef3092, 0xe0000000, 0x3fee6666, 0x66666675},			/* 0.97467=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3fef5a7c, 0xe0000000, 0x3feeb851, 0xeb851ec7},			/* 0.97979=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3fef842f, 0x40000000, 0x3fef0a3d, 0x70a3d719},			/* 0.98488=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3fefadaa, 0xa0000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.98994=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3fefd6ef, 0xe0000000, 0x3fefae14, 0x7ae147bd},			/* 0.99498=f(0.99000)*/
-{13, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000007},			/* 1.00000=f(1.00000)*/
-{13, 0,123,__LINE__, 0x3ff0146d, 0xe0000000, 0x3ff028f5, 0xc28f5c30},			/* 1.00498=f(1.01000)*/
-{13, 0,123,__LINE__, 0x3ff028c1, 0xe0000000, 0x3ff051eb, 0x851eb859},			/* 1.00995=f(1.02000)*/
-{13, 0,123,__LINE__, 0x3ff03cfc, 0x60000000, 0x3ff07ae1, 0x47ae1482},			/* 1.01488=f(1.03000)*/
-{13, 0,123,__LINE__, 0x3ff0511d, 0xe0000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.01980=f(1.04000)*/
-{13, 0,123,__LINE__, 0x3ff06526, 0xa0000000, 0x3ff0cccc, 0xccccccd4},			/* 1.02469=f(1.05000)*/
-{13, 0,123,__LINE__, 0x3ff07917, 0x00000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.02956=f(1.06000)*/
-{13, 0,123,__LINE__, 0x3ff08cef, 0x80000000, 0x3ff11eb8, 0x51eb8526},			/* 1.03440=f(1.07000)*/
-{13, 0,123,__LINE__, 0x3ff0a0b0, 0x20000000, 0x3ff147ae, 0x147ae14f},			/* 1.03923=f(1.08000)*/
-{13, 0,123,__LINE__, 0x3ff0b459, 0x80000000, 0x3ff170a3, 0xd70a3d78},			/* 1.04403=f(1.09000)*/
-{13, 0,123,__LINE__, 0x3ff0c7eb, 0xc0000000, 0x3ff19999, 0x999999a1},			/* 1.04880=f(1.10000)*/
-{13, 0,123,__LINE__, 0x3ff0db67, 0x60000000, 0x3ff1c28f, 0x5c28f5ca},			/* 1.05356=f(1.11000)*/
-{13, 0,123,__LINE__, 0x3ff0eecc, 0x80000000, 0x3ff1eb85, 0x1eb851f3},			/* 1.05830=f(1.12000)*/
-{12, 0,123,__LINE__, 0x3ff1021b, 0xa0000000, 0x3ff2147a, 0xe147ae1c},			/* 1.06301=f(1.13000)*/
-{12, 0,123,__LINE__, 0x3ff11554, 0xc0000000, 0x3ff23d70, 0xa3d70a45},			/* 1.06770=f(1.14000)*/
-{12, 0,123,__LINE__, 0x3ff12878, 0x80000000, 0x3ff26666, 0x6666666e},			/* 1.07238=f(1.15000)*/
-{12, 0,123,__LINE__, 0x3ff13b86, 0xe0000000, 0x3ff28f5c, 0x28f5c297},			/* 1.07703=f(1.16000)*/
-{12, 0,123,__LINE__, 0x3ff14e80, 0x60000000, 0x3ff2b851, 0xeb851ec0},			/* 1.08166=f(1.17000)*/
-{12, 0,123,__LINE__, 0x3ff16165, 0x20000000, 0x3ff2e147, 0xae147ae9},			/* 1.08627=f(1.18000)*/
-{12, 0,123,__LINE__, 0x3ff17435, 0x60000000, 0x3ff30a3d, 0x70a3d712},			/* 1.09087=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{12, 0,123,__LINE__, 0x3ff40d93, 0x20000000, 0x3ff921fb, 0x54442d18},			/* 1.25331=f(1.57079)*/
-{ 1, 0,123,__LINE__, 0x3ffc5bf8, 0xa0000000, 0x400921fb, 0x54442d18},			/* 1.77245=f(3.14159)*/
-{12, 0,123,__LINE__, 0x40015dce, 0x60000000, 0x4012d97c, 0x7f3321d2},			/* 2.17080=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{11, 0,123,__LINE__, 0x3fe8c97f, 0x00000000, 0x3fe33333, 0x333332ec},			/* 0.77459=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0x3ff843e4, 0x40000000, 0x40026666, 0x66666654},			/* 1.51657=f(2.30000)*/
-{13, 0,123,__LINE__, 0x40000000, 0x00000000, 0x400fffff, 0xffffffee},			/* 2.00000=f(4.00000)*/
-{12, 0,123,__LINE__, 0x40031988, 0x60000000, 0x4016cccc, 0xccccccc4},			/* 2.38746=f(5.70000)*/
-{12, 0,123,__LINE__, 0x4005c329, 0xa0000000, 0x401d9999, 0x99999991},			/* 2.72029=f(7.40000)*/
-{11, 0,123,__LINE__, 0x4008220a, 0x00000000, 0x40223333, 0x3333332f},			/* 3.01662=f(9.10000)*/
-{11, 0,123,__LINE__, 0x400a4a6a, 0x40000000, 0x40259999, 0x99999995},			/* 3.28633=f(10.8000)*/
-{11, 0,123,__LINE__, 0x400c48c6, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 3.53553=f(12.5000)*/
-{11, 0,123,__LINE__, 0x400e2574, 0x80000000, 0x402c6666, 0x66666661},			/* 3.76828=f(14.2000)*/
-{11, 0,123,__LINE__, 0x400fe65c, 0x20000000, 0x402fcccc, 0xccccccc7},			/* 3.98748=f(15.9000)*/
-{13, 0,123,__LINE__, 0x4010c7eb, 0xc0000000, 0x40319999, 0x99999997},			/* 4.19523=f(17.6000)*/
-{12, 0,123,__LINE__, 0x4011929c, 0xe0000000, 0x40334ccc, 0xccccccca},			/* 4.39317=f(19.3000)*/
-{12, 0,123,__LINE__, 0x4012548e, 0xc0000000, 0x4034ffff, 0xfffffffd},			/* 4.58257=f(21.0000)*/
-{12, 0,123,__LINE__, 0x40130ecc, 0x80000000, 0x4036b333, 0x33333330},			/* 4.76445=f(22.7000)*/
-{12, 0,123,__LINE__, 0x4013c22f, 0xe0000000, 0x40386666, 0x66666663},			/* 4.93963=f(24.4000)*/
-{12, 0,123,__LINE__, 0x40146f6d, 0x80000000, 0x403a1999, 0x99999996},			/* 5.10881=f(26.1000)*/
-{12, 0,123,__LINE__, 0x4015171c, 0xc0000000, 0x403bcccc, 0xccccccc9},			/* 5.27257=f(27.8000)*/
-{12, 0,123,__LINE__, 0x4015b9be, 0x60000000, 0x403d7fff, 0xfffffffc},			/* 5.43139=f(29.5000)*/
-0,};
-test_sqrtf(m)   {run_vector_1(m,sqrtf_vec,(char *)(sqrtf),"sqrtf","ff");   }	
diff --git a/newlib/libm/test/string.c b/newlib/libm/test/string.c
deleted file mode 100644
index c47047212..000000000
--- a/newlib/libm/test/string.c
+++ /dev/null
@@ -1,556 +0,0 @@
-#include "test.h"
-#include <string.h>
-#include <errno.h>
-
-
-_CONST char *it = "<UNSET>";	/* Routine name for message routines. */
-int  errors = 0;
-
-/* Complain if condition is not true.  */
-#define check(thing) checkit(thing, __LINE__)
-
-void
-_DEFUN(checkit,(ok,l),
-       int ok _AND
-       int l )
-
-{
-  newfunc(it);
-  line(l);
-  
-  if (!ok)
-  {
-    printf("string.c:%d %s\n", l, it);
-    ++errors;
-  }
-}
-
-
-
-/* Complain if first two args don't strcmp as equal.  */
-#define equal(a, b)  funcqual(a,b,__LINE__);
-
-void
-_DEFUN(funcqual,(a,b,l),
-       char *a _AND
-       char *b _AND
-       int l)
-{
-  newfunc(it);
-  
-  line(l);
-  if (a == NULL && b == NULL) return;
-  if (strcmp(a,b)) {
-      printf("string.c:%d (%s)\n", l, it);  
-    }
-}
-
-
-
-static char one[50];
-static char two[50];
-
-
-void test_string()
-{
-  /* Test strcmp first because we use it to test other things.  */
-  it = "strcmp";
-  check(strcmp("", "") == 0); /* Trivial case. */
-  check(strcmp("a", "a") == 0); /* Identity. */
-  check(strcmp("abc", "abc") == 0); /* Multicharacter. */
-  check(strcmp("abc", "abcd") < 0); /* Length mismatches. */
-  check(strcmp("abcd", "abc") > 0);
-  check(strcmp("abcd", "abce") < 0);	/* Honest miscompares. */
-  check(strcmp("abce", "abcd") > 0);
-  check(strcmp("a\103", "a") > 0); /* Tricky if char signed. */
-  check(strcmp("a\103", "a\003") > 0);
-
-  /* Test strcpy next because we need it to set up other tests.  */
-  it = "strcpy";
-  check(strcpy(one, "abcd") == one);	/* Returned value. */
-  equal(one, "abcd");	/* Basic test. */
-
-  (void) strcpy(one, "x");
-  equal(one, "x");		/* Writeover. */
-  equal(one+2, "cd");	/* Wrote too much? */
-
-  (void) strcpy(two, "hi there");
-  (void) strcpy(one, two);
-  equal(one, "hi there");	/* Basic test encore. */
-  equal(two, "hi there");	/* Stomped on source? */
-
-  (void) strcpy(one, "");
-  equal(one, "");		/* Boundary condition. */
-
-  /* strcat.  */
-  it = "strcat";
-  (void) strcpy(one, "ijk");
-  check(strcat(one, "lmn") == one); /* Returned value. */
-  equal(one, "ijklmn");	/* Basic test. */
-
-  (void) strcpy(one, "x");
-  (void) strcat(one, "yz");
-  equal(one, "xyz");		/* Writeover. */
-  equal(one+4, "mn");	/* Wrote too much? */
-
-  (void) strcpy(one, "gh");
-  (void) strcpy(two, "ef");
-  (void) strcat(one, two);
-  equal(one, "ghef");	/* Basic test encore. */
-  equal(two, "ef");		/* Stomped on source? */
-
-  (void) strcpy(one, "");
-  (void) strcat(one, "");
-  equal(one, "");		/* Boundary conditions. */
-  (void) strcpy(one, "ab");
-  (void) strcat(one, "");
-  equal(one, "ab");
-  (void) strcpy(one, "");
-  (void) strcat(one, "cd");
-  equal(one, "cd");
-
-  /* strncat - first test it as strcat, with big counts,
-     then test the count mechanism.  */
-  it = "strncat";
-  (void) strcpy(one, "ijk");
-  check(strncat(one, "lmn", 99) == one); /* Returned value. */
-  equal(one, "ijklmn");	/* Basic test. */
-
-  (void) strcpy(one, "x");
-  (void) strncat(one, "yz", 99);
-  equal(one, "xyz");		/* Writeover. */
-  equal(one+4, "mn");	/* Wrote too much? */
-
-  (void) strcpy(one, "gh");
-  (void) strcpy(two, "ef");
-  (void) strncat(one, two, 99);
-  equal(one, "ghef");	/* Basic test encore. */
-  equal(two, "ef");		/* Stomped on source? */
-
-  (void) strcpy(one, "");
-  (void) strncat(one, "", 99);
-  equal(one, "");		/* Boundary conditions. */
-  (void) strcpy(one, "ab");
-  (void) strncat(one, "", 99);
-  equal(one, "ab");
-  (void) strcpy(one, "");
-  (void) strncat(one, "cd", 99);
-  equal(one, "cd");
-
-  (void) strcpy(one, "ab");
-  (void) strncat(one, "cdef", 2);
-  equal(one, "abcd");	/* Count-limited. */
-
-  (void) strncat(one, "gh", 0);
-  equal(one, "abcd");	/* Zero count. */
-
-  (void) strncat(one, "gh", 2);
-  equal(one, "abcdgh");	/* Count _AND length equal. */
-  it = "strncmp";
-  /* strncmp - first test as strcmp with big counts";*/
-  check(strncmp("", "", 99) == 0); /* Trivial case. */
-  check(strncmp("a", "a", 99) == 0);	/* Identity. */
-  check(strncmp("abc", "abc", 99) == 0); /* Multicharacter. */
-  check(strncmp("abc", "abcd", 99) < 0); /* Length unequal. */
-  check(strncmp("abcd", "abc",99) > 0);
-  check(strncmp("abcd", "abce", 99) < 0); /* Honestly unequal. */
-  check(strncmp("abce", "abcd",99)>0);
-  check(strncmp("abce", "abcd", 3) == 0); /* Count limited. */
-  check(strncmp("abce", "abc", 3) == 0); /* Count == length. */
-  check(strncmp("abcd", "abce", 4) < 0); /* Nudging limit. */
-  check(strncmp("abc", "def", 0) == 0); /* Zero count. */
-
-  /* strncpy - testing is a bit different because of odd semantics.  */
-  it = "strncpy";
-  check(strncpy(one, "abc", 4) == one); /* Returned value. */
-  equal(one, "abc");		/* Did the copy go right? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) strncpy(one, "xyz", 2);
-  equal(one, "xycdefgh");	/* Copy cut by count. */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) strncpy(one, "xyz", 3); /* Copy cut just before NUL. */
-  equal(one, "xyzdefgh");
-
-  (void) strcpy(one, "abcdefgh");
-  (void) strncpy(one, "xyz", 4); /* Copy just includes NUL. */
-  equal(one, "xyz");
-  equal(one+4, "efgh");	/* Wrote too much? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) strncpy(one, "xyz", 5); /* Copy includes padding. */
-  equal(one, "xyz");
-  equal(one+4, "");
-  equal(one+5, "fgh");
-
-  (void) strcpy(one, "abc");
-  (void) strncpy(one, "xyz", 0); /* Zero-length copy. */
-  equal(one, "abc");	
-
-  (void) strncpy(one, "", 2);	/* Zero-length source. */
-  equal(one, "");
-  equal(one+1, "");	
-  equal(one+2, "c");
-
-  (void) strcpy(one, "hi there");
-  (void) strncpy(two, one, 9);
-  equal(two, "hi there");	/* Just paranoia. */
-  equal(one, "hi there");	/* Stomped on source? */
-
-  /* strlen.  */
-  it = "strlen";
-  check(strlen("") == 0);	/* Empty. */
-  check(strlen("a") == 1);	/* Single char. */
-  check(strlen("abcd") == 4); /* Multiple chars. */
-
-  /* strchr.  */
-  it = "strchr";
-  check(strchr("abcd", 'z') == NULL); /* Not found. */
-  (void) strcpy(one, "abcd");
-  check(strchr(one, 'c') == one+2); /* Basic test. */
-  check(strchr(one, 'd') == one+3); /* End of string. */
-  check(strchr(one, 'a') == one); /* Beginning. */
-  check(strchr(one, '\0') == one+4);	/* Finding NUL. */
-  (void) strcpy(one, "ababa");
-  check(strchr(one, 'b') == one+1); /* Finding first. */
-  (void) strcpy(one, "");
-  check(strchr(one, 'b') == NULL); /* Empty string. */
-  check(strchr(one, '\0') == one); /* NUL in empty string. */
-
-  /* index - just like strchr.  */
-  it = "index";
-  check(index("abcd", 'z') == NULL);	/* Not found. */
-  (void) strcpy(one, "abcd");
-  check(index(one, 'c') == one+2); /* Basic test. */
-  check(index(one, 'd') == one+3); /* End of string. */
-  check(index(one, 'a') == one); /* Beginning. */
-  check(index(one, '\0') == one+4); /* Finding NUL. */
-  (void) strcpy(one, "ababa");
-  check(index(one, 'b') == one+1); /* Finding first. */
-  (void) strcpy(one, "");
-  check(index(one, 'b') == NULL); /* Empty string. */
-  check(index(one, '\0') == one); /* NUL in empty string. */
-
-  /* strrchr.  */
-  it = "strrchr";
-  check(strrchr("abcd", 'z') == NULL); /* Not found. */
-  (void) strcpy(one, "abcd");
-  check(strrchr(one, 'c') == one+2);	/* Basic test. */
-  check(strrchr(one, 'd') == one+3);	/* End of string. */
-  check(strrchr(one, 'a') == one); /* Beginning. */
-  check(strrchr(one, '\0') == one+4); /* Finding NUL. */
-  (void) strcpy(one, "ababa");
-  check(strrchr(one, 'b') == one+3);	/* Finding last. */
-  (void) strcpy(one, "");
-  check(strrchr(one, 'b') == NULL); /* Empty string. */
-  check(strrchr(one, '\0') == one); /* NUL in empty string. */
-
-  /* rindex - just like strrchr.  */
-  it = "rindex";
-  check(rindex("abcd", 'z') == NULL); /* Not found. */
-  (void) strcpy(one, "abcd");
-  check(rindex(one, 'c') == one+2); /* Basic test. */
-  check(rindex(one, 'd') == one+3); /* End of string. */
-  check(rindex(one, 'a') == one); /* Beginning. */
-  check(rindex(one, '\0') == one+4);	/* Finding NUL. */
-  (void) strcpy(one, "ababa");
-  check(rindex(one, 'b') == one+3); /* Finding last. */
-  (void) strcpy(one, "");
-  check(rindex(one, 'b') == NULL); /* Empty string. */
-  check(rindex(one, '\0') == one); /* NUL in empty string. */
-
-  /* strpbrk - somewhat like strchr.  */
-  it = "strpbrk";
-  check(strpbrk("abcd", "z") == NULL); /* Not found. */
-  (void) strcpy(one, "abcd");
-  check(strpbrk(one, "c") == one+2);	/* Basic test. */
-  check(strpbrk(one, "d") == one+3);	/* End of string. */
-  check(strpbrk(one, "a") == one); /* Beginning. */
-  check(strpbrk(one, "") == NULL); /* Empty search list. */
-  check(strpbrk(one, "cb") == one+1); /* Multiple search. */
-  (void) strcpy(one, "abcabdea");
-  check(strpbrk(one, "b") == one+1);	/* Finding first. */
-  check(strpbrk(one, "cb") == one+1); /* With multiple search. */
-  check(strpbrk(one, "db") == one+1); /* Another variant. */
-  (void) strcpy(one, "");
-  check(strpbrk(one, "bc") == NULL); /* Empty string. */
-  check(strpbrk(one, "") == NULL); /* Both strings empty. */
-
-  /* strstr - somewhat like strchr.  */
-  it = "strstr";
-  check(strstr("z", "abcd") == NULL); /* Not found. */
-  check(strstr("abx", "abcd") == NULL); /* Dead end. */
-  (void) strcpy(one, "abcd");
-  check(strstr(one,"c") == one+2); /* Basic test. */
-  check(strstr(one, "bc") == one+1);	/* Multichar. */
-  check(strstr(one,"d") == one+3); /* End of string. */
-  check(strstr(one,"cd") == one+2);	/* Tail of string. */
-  check(strstr(one,"abc") == one); /* Beginning. */
-  check(strstr(one,"abcd") == one);	/* Exact match. */
-  check(strstr(one,"de") == NULL);	/* Past end. */
-  check(strstr(one,"") == one); /* Finding empty. */
-  (void) strcpy(one, "ababa");
-  check(strstr(one,"ba") == one+1); /* Finding first. */
-  (void) strcpy(one, "");
-  check(strstr(one, "b") == NULL); /* Empty string. */
-  check(strstr(one,"") == one); /* Empty in empty string. */
-  (void) strcpy(one, "bcbca");
-  check(strstr(one,"bca") == one+2); /* False start. */
-  (void) strcpy(one, "bbbcabbca");
-  check(strstr(one,"bbca") == one+1); /* With overlap. */
-
-  /* strspn.  */
-  it = "strspn";
-  check(strspn("abcba", "abc") == 5); /* Whole string. */
-  check(strspn("abcba", "ab") == 2);	/* Partial. */
-  check(strspn("abc", "qx") == 0); /* None. */
-  check(strspn("", "ab") == 0); /* Null string. */
-  check(strspn("abc", "") == 0); /* Null search list. */
-
-  /* strcspn.  */
-  it = "strcspn";
-  check(strcspn("abcba", "qx") == 5); /* Whole string. */
-  check(strcspn("abcba", "cx") == 2); /* Partial. */
-  check(strcspn("abc", "abc") == 0);	/* None. */
-  check(strcspn("", "ab") == 0); /* Null string. */
-  check(strcspn("abc", "") == 3); /* Null search list. */
-
-  /* strtok - the hard one.  */
-  it = "strtok";
-  (void) strcpy(one, "first, second, third");
-  equal(strtok(one, ", "), "first");	/* Basic test. */
-  equal(one, "first");
-  equal(strtok((char *)NULL, ", "), "second");
-  equal(strtok((char *)NULL, ", "), "third");
-  check(strtok((char *)NULL, ", ") == NULL);
-  (void) strcpy(one, ", first, ");
-  equal(strtok(one, ", "), "first");	/* Extra delims, 1 tok. */
-  check(strtok((char *)NULL, ", ") == NULL);
-  (void) strcpy(one, "1a, 1b; 2a, 2b");
-  equal(strtok(one, ", "), "1a"); /* Changing delim lists. */
-  equal(strtok((char *)NULL, "; "), "1b");
-  equal(strtok((char *)NULL, ", "), "2a");
-  (void) strcpy(two, "x-y");
-  equal(strtok(two, "-"), "x"); /* New string before done. */
-  equal(strtok((char *)NULL, "-"), "y");
-  check(strtok((char *)NULL, "-") == NULL);
-  (void) strcpy(one, "a,b, c,, ,d");
-  equal(strtok(one, ", "), "a"); /* Different separators. */
-  equal(strtok((char *)NULL, ", "), "b");
-  equal(strtok((char *)NULL, " ,"), "c"); /* Permute list too. */
-  equal(strtok((char *)NULL, " ,"), "d");
-  check(strtok((char *)NULL, ", ") == NULL);
-  check(strtok((char *)NULL, ", ") == NULL); /* Persistence. */
-  (void) strcpy(one, ", ");
-  check(strtok(one, ", ") == NULL);	/* No tokens. */
-  (void) strcpy(one, "");
-  check(strtok(one, ", ") == NULL);	/* Empty string. */
-  (void) strcpy(one, "abc");
-  equal(strtok(one, ", "), "abc"); /* No delimiters. */
-  check(strtok((char *)NULL, ", ") == NULL);
-  (void) strcpy(one, "abc");
-  equal(strtok(one, ""), "abc"); /* Empty delimiter list. */
-  check(strtok((char *)NULL, "") == NULL);
-  (void) strcpy(one, "abcdefgh");
-  (void) strcpy(one, "a,b,c");
-  equal(strtok(one, ","), "a"); /* Basics again... */
-  equal(strtok((char *)NULL, ","), "b");
-  equal(strtok((char *)NULL, ","), "c");
-  check(strtok((char *)NULL, ",") == NULL);
-  equal(one+6, "gh");	/* Stomped past end? */
-  equal(one, "a");		/* Stomped old tokens? */
-  equal(one+2, "b");
-  equal(one+4, "c");
-
-  /* memcmp.  */
-  it = "memcmp";
-  check(memcmp("a", "a", 1) == 0); /* Identity. */
-  check(memcmp("abc", "abc", 3) == 0); /* Multicharacter. */
-  check(memcmp("abcd", "abce", 4) < 0); /* Honestly unequal. */
-  check(memcmp("abce", "abcd",4));
-  check(memcmp("alph", "beta", 4) < 0);
-  check(memcmp("abce", "abcd", 3) == 0); /* Count limited. */
-  check(memcmp("abc", "def", 0) == 0); /* Zero count. */
-
-  /* memcmp should test strings as unsigned */
-  one[0] = 0xfe;
-  two[0] = 0x03;
-  check(memcmp(one, two,1) > 0);
-  
-  
-  /* memchr.  */
-  it = "memchr";
-  check(memchr("abcd", 'z', 4) == NULL); /* Not found. */
-  (void) strcpy(one, "abcd");
-  check(memchr(one, 'c', 4) == one+2); /* Basic test. */
-  check(memchr(one, 'd', 4) == one+3); /* End of string. */
-  check(memchr(one, 'a', 4) == one);	/* Beginning. */
-  check(memchr(one, '\0', 5) == one+4); /* Finding NUL. */
-  (void) strcpy(one, "ababa");
-  check(memchr(one, 'b', 5) == one+1); /* Finding first. */
-  check(memchr(one, 'b', 0) == NULL); /* Zero count. */
-  check(memchr(one, 'a', 1) == one);	/* Singleton case. */
-  (void) strcpy(one, "a\203b");
-  check(memchr(one, 0203, 3) == one+1); /* Unsignedness. */
-
-  /* memcpy - need not work for overlap.  */
-  it = "memcpy";
-  check(memcpy(one, "abc", 4) == one); /* Returned value. */
-  equal(one, "abc");		/* Did the copy go right? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memcpy(one+1, "xyz", 2);
-  equal(one, "axydefgh");	/* Basic test. */
-
-  (void) strcpy(one, "abc");
-  (void) memcpy(one, "xyz", 0);
-  equal(one, "abc");		/* Zero-length copy. */
-
-  (void) strcpy(one, "hi there");
-  (void) strcpy(two, "foo");
-  (void) memcpy(two, one, 9);
-  equal(two, "hi there");	/* Just paranoia. */
-  equal(one, "hi there");	/* Stomped on source? */
-#if 0
-  /* memmove - must work on overlap.  */
-  it = "memmove";
-  check(memmove(one, "abc", 4) == one); /* Returned value. */
-  equal(one, "abc");		/* Did the copy go right? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memmove(one+1, "xyz", 2);
-  equal(one, "axydefgh");	/* Basic test. */
-
-  (void) strcpy(one, "abc");
-  (void) memmove(one, "xyz", 0);
-  equal(one, "abc");		/* Zero-length copy. */
-
-  (void) strcpy(one, "hi there");
-  (void) strcpy(two, "foo");
-  (void) memmove(two, one, 9);
-  equal(two, "hi there");	/* Just paranoia. */
-  equal(one, "hi there");	/* Stomped on source? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memmove(one+1, one, 9);
-  equal(one, "aabcdefgh");	/* Overlap, right-to-left. */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memmove(one+1, one+2, 7);
-  equal(one, "acdefgh");	/* Overlap, left-to-right. */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memmove(one, one, 9);
-  equal(one, "abcdefgh");	/* 100% overlap. */
-#endif
-#if 0
-  /* memccpy - first test like memcpy, then the search part
-     The SVID, the only place where memccpy is mentioned, says
-     overlap might fail, so we don't try it.  Besides, it's hard
-     to see the rationale for a non-left-to-right memccpy.  */
-  it = "memccpy";
-  check(memccpy(one, "abc", 'q', 4) == NULL); /* Returned value. */
-  equal(one, "abc");		/* Did the copy go right? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) memccpy(one+1, "xyz", 'q', 2);
-  equal(one, "axydefgh");	/* Basic test. */
-
-  (void) strcpy(one, "abc");
-  (void) memccpy(one, "xyz", 'q', 0);
-  equal(one, "abc");		/* Zero-length copy. */
-
-  (void) strcpy(one, "hi there");
-  (void) strcpy(two, "foo");
-  (void) memccpy(two, one, 'q', 9);
-  equal(two, "hi there");	/* Just paranoia. */
-  equal(one, "hi there");	/* Stomped on source? */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) strcpy(two, "horsefeathers");
-  check(memccpy(two, one, 'f', 9) == two+6);	/* Returned value. */
-  equal(one, "abcdefgh");	/* Source intact? */
-  equal(two, "abcdefeathers"); /* Copy correct? */
-
-  (void) strcpy(one, "abcd");
-  (void) strcpy(two, "bumblebee");
-  check(memccpy(two, one, 'a', 4) == two+1); /* First char. */
-  equal(two, "aumblebee");
-  check(memccpy(two, one, 'd', 4) == two+4); /* Last char. */
-  equal(two, "abcdlebee");
-  (void) strcpy(one, "xyz");
-  check(memccpy(two, one, 'x', 1) == two+1); /* Singleton. */
-  equal(two, "xbcdlebee");
-#endif
-  /* memset.  */
-  it = "memset";
-  (void) strcpy(one, "abcdefgh");
-  check(memset(one+1, 'x', 3) == one+1); /* Return value. */
-  equal(one, "axxxefgh");	/* Basic test. */
-
-  (void) memset(one+2, 'y', 0);
-  equal(one, "axxxefgh");	/* Zero-length set. */
-
-  (void) memset(one+5, 0, 1);
-  equal(one, "axxxe");	/* Zero fill. */
-  equal(one+6, "gh");	/* _AND the leftover. */
-
-  (void) memset(one+2, 010045, 1);
-  equal(one, "ax\045xe");	/* Unsigned char convert. */
-
-  /* bcopy - much like memcpy.
-     Berklix manual is silent about overlap, so don't test it.  */
-  it = "bcopy";
-  (void) bcopy("abc", one, 4);
-  equal(one, "abc");		/* Simple copy. */
-
-  (void) strcpy(one, "abcdefgh");
-  (void) bcopy("xyz", one+1, 2);
-  equal(one, "axydefgh");	/* Basic test. */
-
-  (void) strcpy(one, "abc");
-  (void) bcopy("xyz", one, 0);
-  equal(one, "abc");		/* Zero-length copy. */
-
-  (void) strcpy(one, "hi there");
-  (void) strcpy(two, "foo");
-  (void) bcopy(one, two, 9);
-  equal(two, "hi there");	/* Just paranoia. */
-  equal(one, "hi there");	/* Stomped on source? */
-
-  /* bzero.  */
-  it = "bzero";
-  (void) strcpy(one, "abcdef");
-  bzero(one+2, 2);
-  equal(one, "ab");		/* Basic test. */
-  equal(one+3, "");
-  equal(one+4, "ef");
-
-  (void) strcpy(one, "abcdef");
-  bzero(one+2, 0);
-  equal(one, "abcdef");	/* Zero-length copy. */
-
-  /* bcmp - somewhat like memcmp.  */
-  it = "bcmp";
-  check(bcmp("a", "a", 1) == 0); /* Identity. */
-  check(bcmp("abc", "abc", 3) == 0);	/* Multicharacter. */
-  check(bcmp("abcd", "abce", 4) != 0); /* Honestly unequal. */
-  check(bcmp("abce", "abcd",4));
-  check(bcmp("alph", "beta", 4) != 0);
-  check(bcmp("abce", "abcd", 3) == 0); /* Count limited. */
-  check(bcmp("abc", "def", 0) == 0);	/* Zero count. */
-
-#if 0  /* strerror - VERY system-dependent.  */
-{
-  extern CONST unsigned int _sys_nerr;
-  extern CONST char *CONST _sys_errlist[];
-  int f;
-  it = "strerror";
-  f = open("/", O_WRONLY);	/* Should always fail. */
-  check(f < 0 && errno > 0 && errno < _sys_nerr);
-  equal(strerror(errno), _sys_errlist[errno]);
-}
-#endif
-}
-
diff --git a/newlib/libm/test/tan_vec.c b/newlib/libm/test/tan_vec.c
deleted file mode 100644
index eb76cb562..000000000
--- a/newlib/libm/test/tan_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type tan_vec[] = {
-{64, 0,123,__LINE__, 0xc00493c4, 0x3acb164c, 0xbff33333, 0x33333333},			/* -2.57215=f(-1.20000)*/
-{63, 0,123,__LINE__, 0xc003fbb2, 0xac8d6e09, 0xbff30a3d, 0x70a3d70a},			/* -2.49789=f(-1.19000)*/
-{63, 0,123,__LINE__, 0xc0036b0a, 0xa04728b5, 0xbff2e147, 0xae147ae1},			/* -2.42726=f(-1.18000)*/
-{64, 0,123,__LINE__, 0xc002e13d, 0xc4352012, 0xbff2b851, 0xeb851eb8},			/* -2.35998=f(-1.17000)*/
-{64, 0,123,__LINE__, 0xc0025dcb, 0xa00cf2d1, 0xbff28f5c, 0x28f5c28f},			/* -2.29579=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xc001e03f, 0xefaf53c9, 0xbff26666, 0x66666666},			/* -2.23449=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xc0016831, 0x3887b2e3, 0xbff23d70, 0xa3d70a3d},			/* -2.17587=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xc000f53f, 0x9047cd43, 0xbff2147a, 0xe147ae14},			/* -2.11975=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xc0008713, 0x8d550701, 0xbff1eb85, 0x1eb851eb},			/* -2.06595=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xc0001d5d, 0x5a921689, 0xbff1c28f, 0x5c28f5c2},			/* -2.01433=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfff6fa7, 0xd286214a, 0xbff19999, 0x99999999},			/* -1.96476=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbffeac68, 0x7953b03b, 0xbff170a3, 0xd70a3d70},			/* -1.91709=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbffdf081, 0x975fac4d, 0xbff147ae, 0x147ae147},			/* -1.87121=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbffd3b81, 0xeb0fcaad, 0xbff11eb8, 0x51eb851e},			/* -1.82702=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbffc8d01, 0x0d5ddd8b, 0xbff0f5c2, 0x8f5c28f5},			/* -1.78442=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbffbe49e, 0x982fe6aa, 0xbff0cccc, 0xcccccccc},			/* -1.74331=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbffb4201, 0x654a4047, 0xbff0a3d7, 0x0a3d70a3},			/* -1.70361=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbffaa4d6, 0xe2aca2f8, 0xbff07ae1, 0x47ae147a},			/* -1.66524=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbffa0cd2, 0x79a136ed, 0xbff051eb, 0x851eb851},			/* -1.62813=f(-1.02000)*/
-{64, 0,123,__LINE__, 0xbff979ad, 0x06284697, 0xbff028f5, 0xc28f5c28},			/* -1.59220=f(-1.01000)*/
-{63, 0,123,__LINE__, 0xbff8eb24, 0x5cbee3a1, 0xbfefffff, 0xfffffffe},			/* -1.55740=f(-0.01000)*/
-{58, 0,123,__LINE__, 0xbff860fa, 0xdcc59060, 0xbfefae14, 0x7ae147ac},			/* -1.52367=f(-0.99000)*/
-{64, 0,123,__LINE__, 0xbff7daf7, 0x0e07fa59, 0xbfef5c28, 0xf5c28f5a},			/* -1.49095=f(-0.98000)*/
-{62, 0,123,__LINE__, 0xbff758e3, 0x4819d01a, 0xbfef0a3d, 0x70a3d708},			/* -1.45920=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbff6da8d, 0x62683760, 0xbfeeb851, 0xeb851eb6},			/* -1.42835=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbff65fc6, 0x6c04955b, 0xbfee6666, 0x66666664},			/* -1.39838=f(-0.95000)*/
-{62, 0,123,__LINE__, 0xbff5e862, 0x6a4d39ca, 0xbfee147a, 0xe147ae12},			/* -1.36923=f(-0.94000)*/
-{63, 0,123,__LINE__, 0xbff57438, 0x1db3e2ff, 0xbfedc28f, 0x5c28f5c0},			/* -1.34087=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbff50320, 0xcbf9abc7, 0xbfed70a3, 0xd70a3d6e},			/* -1.31326=f(-0.92000)*/
-{63, 0,123,__LINE__, 0xbff494f8, 0x0f4c58a1, 0xbfed1eb8, 0x51eb851c},			/* -1.28636=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbff4299b, 0xa9c2a134, 0xbfeccccc, 0xccccccca},			/* -1.26015=f(-0.90000)*/
-{63, 0,123,__LINE__, 0xbff3c0eb, 0x5cc4656d, 0xbfec7ae1, 0x47ae1478},			/* -1.23459=f(-0.89000)*/
-{61, 0,123,__LINE__, 0xbff35ac8, 0xc3f910bc, 0xbfec28f5, 0xc28f5c26},			/* -1.20966=f(-0.88000)*/
-{60, 0,123,__LINE__, 0xbff2f717, 0x33620b29, 0xbfebd70a, 0x3d70a3d4},			/* -1.18532=f(-0.87000)*/
-{63, 0,123,__LINE__, 0xbff295bb, 0x98513ca9, 0xbfeb851e, 0xb851eb82},			/* -1.16155=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbff2369c, 0x5cf4878a, 0xbfeb3333, 0x33333330},			/* -1.13833=f(-0.85000)*/
-{62, 0,123,__LINE__, 0xbff1d9a1, 0x4e36e752, 0xbfeae147, 0xae147ade},			/* -1.11563=f(-0.84000)*/
-{62, 0,123,__LINE__, 0xbff17eb3, 0x83beb82e, 0xbfea8f5c, 0x28f5c28c},			/* -1.09343=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbff125bd, 0x49d6af66, 0xbfea3d70, 0xa3d70a3a},			/* -1.07171=f(-0.82000)*/
-{63, 0,123,__LINE__, 0xbff0ceaa, 0x0d145bf5, 0xbfe9eb85, 0x1eb851e8},			/* -1.05045=f(-0.81000)*/
-{63, 0,123,__LINE__, 0xbff07966, 0x4793b607, 0xbfe99999, 0x99999996},			/* -1.02963=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbff025df, 0x6fa369bb, 0xbfe947ae, 0x147ae144},			/* -1.00924=f(-0.79000)*/
-{62, 0,123,__LINE__, 0xbfefa807, 0xcf826c3d, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.98926=f(-0.78000)*/
-{64, 0,123,__LINE__, 0xbfef0785, 0xdf91f899, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.96966=f(-0.77000)*/
-{62, 0,123,__LINE__, 0xbfee6a19, 0x2e7801f1, 0xbfe851eb, 0x851eb84e},			/* -0.95045=f(-0.76000)*/
-{62, 0,123,__LINE__, 0xbfedcfa3, 0x6110eee5, 0xbfe7ffff, 0xfffffffc},			/* -0.93159=f(-0.75000)*/
-{61, 0,123,__LINE__, 0xbfed3807, 0x8a7774ea, 0xbfe7ae14, 0x7ae147aa},			/* -0.91308=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfeca32a, 0x16174ae8, 0xbfe75c28, 0xf5c28f58},			/* -0.89491=f(-0.73000)*/
-{64, 0,123,__LINE__, 0xbfec10f0, 0xb34aae96, 0xbfe70a3d, 0x70a3d706},			/* -0.87706=f(-0.72000)*/
-{62, 0,123,__LINE__, 0xbfeb8142, 0x426299ed, 0xbfe6b851, 0xeb851eb4},			/* -0.85952=f(-0.71000)*/
-{60, 0,123,__LINE__, 0xbfeaf406, 0xc2fc78a7, 0xbfe66666, 0x66666662},			/* -0.84228=f(-0.70000)*/
-{64, 0,123,__LINE__, 0xbfea6927, 0x438ad4c2, 0xbfe6147a, 0xe147ae10},			/* -0.82533=f(-0.69000)*/
-{64, 0,123,__LINE__, 0xbfe9e08d, 0xd1f8d28c, 0xbfe5c28f, 0x5c28f5be},			/* -0.80866=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe95a25, 0x6d52797a, 0xbfe570a3, 0xd70a3d6c},			/* -0.79225=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe8d5d9, 0xf85db5f5, 0xbfe51eb8, 0x51eb851a},			/* -0.77610=f(-0.66000)*/
-{64, 0,123,__LINE__, 0xbfe85398, 0x2d11be31, 0xbfe4cccc, 0xccccccc8},			/* -0.76020=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe7d34d, 0x90dc178c, 0xbfe47ae1, 0x47ae1476},			/* -0.74454=f(-0.64000)*/
-{64, 0,123,__LINE__, 0xbfe754e8, 0x69a3e63a, 0xbfe428f5, 0xc28f5c24},			/* -0.72911=f(-0.63000)*/
-{64, 0,123,__LINE__, 0xbfe6d857, 0xb37d7b1e, 0xbfe3d70a, 0x3d70a3d2},			/* -0.71390=f(-0.62000)*/
-{64, 0,123,__LINE__, 0xbfe65d8b, 0x17013ed4, 0xbfe3851e, 0xb851eb80},			/* -0.69891=f(-0.61000)*/
-{64, 0,123,__LINE__, 0xbfe5e472, 0xe03a2805, 0xbfe33333, 0x3333332e},			/* -0.68413=f(-0.60000)*/
-{64, 0,123,__LINE__, 0xbfe56cff, 0xf620e1f3, 0xbfe2e147, 0xae147adc},			/* -0.66955=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe4f723, 0xd299a7be, 0xbfe28f5c, 0x28f5c28a},			/* -0.65516=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe482d0, 0x7aeba509, 0xbfe23d70, 0xa3d70a38},			/* -0.64096=f(-0.57000)*/
-{63, 0,123,__LINE__, 0xbfe40ff8, 0x78a96652, 0xbfe1eb85, 0x1eb851e6},			/* -0.62694=f(-0.56000)*/
-{64, 0,123,__LINE__, 0xbfe39e8e, 0xd3028c71, 0xbfe19999, 0x99999994},			/* -0.61310=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfe32e87, 0x0877915c, 0xbfe147ae, 0x147ae142},			/* -0.59942=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfe2bfd5, 0x08e8f96f, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.58591=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfe2526d, 0x2ffbcd57, 0xbfe0a3d7, 0x0a3d709e},			/* -0.57256=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfe1e644, 0x3fcdaee5, 0xbfe051eb, 0x851eb84c},			/* -0.55935=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfe17b4f, 0x5bf34743, 0xbfdfffff, 0xfffffff4},			/* -0.54630=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfe11184, 0x04bc2fcf, 0xbfdf5c28, 0xf5c28f50},			/* -0.53338=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfe0a8d8, 0x12b7d223, 0xbfdeb851, 0xeb851eac},			/* -0.52061=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfe04141, 0xb2770eea, 0xbfde147a, 0xe147ae08},			/* -0.50796=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdfb56e, 0xc10d900b, 0xbfdd70a3, 0xd70a3d64},			/* -0.49544=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdeea5f, 0xcb3f61a3, 0xbfdccccc, 0xccccccc0},			/* -0.48305=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfde2144, 0xa61010ac, 0xbfdc28f5, 0xc28f5c1c},			/* -0.47078=f(-0.44000)*/
-{60, 0,123,__LINE__, 0xbfdd5a0b, 0xfe483966, 0xbfdb851e, 0xb851eb78},			/* -0.45862=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfdc94a5, 0x04655ca0, 0xbfdae147, 0xae147ad4},			/* -0.44657=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfdbd0ff, 0x6664f780, 0xbfda3d70, 0xa3d70a30},			/* -0.43463=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfdb0f0b, 0x49dcdcc8, 0xbfd99999, 0x9999998c},			/* -0.42279=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfda4eb9, 0x465c156f, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41105=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd98ffa, 0x600fde98, 0xbfd851eb, 0x851eb844},			/* -0.39941=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd8d2c0, 0x02a8a451, 0xbfd7ae14, 0x7ae147a0},			/* -0.38786=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd816fb, 0xfc7b1cf2, 0xbfd70a3d, 0x70a3d6fc},			/* -0.37640=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd75ca0, 0x79d9e7d4, 0xbfd66666, 0x66666658},			/* -0.36502=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd6a3a0, 0x00a44c7b, 0xbfd5c28f, 0x5c28f5b4},			/* -0.35373=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd5ebed, 0x6c06ed80, 0xbfd51eb8, 0x51eb8510},			/* -0.34252=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd5357b, 0xe86b7455, 0xbfd47ae1, 0x47ae146c},			/* -0.33138=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd4803e, 0xef9469bf, 0xbfd3d70a, 0x3d70a3c8},			/* -0.32032=f(-0.31000)*/
-{63, 0,123,__LINE__, 0xbfd3cc2a, 0x44e29986, 0xbfd33333, 0x33333324},			/* -0.30933=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd31931, 0xf1c1881e, 0xbfd28f5c, 0x28f5c280},			/* -0.29841=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd2674a, 0x4238a5c3, 0xbfd1eb85, 0x1eb851dc},			/* -0.28755=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd1b667, 0xc19f0d22, 0xbfd147ae, 0x147ae138},			/* -0.27675=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd1067f, 0x376fbb46, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26602=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfd05785, 0xa43c4c45, 0xbfcfffff, 0xffffffe0},			/* -0.25534=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfcf52e0, 0x7d78c725, 0xbfceb851, 0xeb851e98},			/* -0.24471=f(-0.24000)*/
-{62, 0,123,__LINE__, 0xbfcdf868, 0xe1f0008d, 0xbfcd70a3, 0xd70a3d50},			/* -0.23414=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcc9f8f, 0xab162ad9, 0xbfcc28f5, 0xc28f5c08},			/* -0.22361=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfcb4840, 0x6a01a891, 0xbfcae147, 0xae147ac0},			/* -0.21314=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc9f267, 0x068a55c9, 0xbfc99999, 0x99999978},			/* -0.20271=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc89def, 0xba56182d, 0xbfc851eb, 0x851eb830},			/* -0.19231=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc74ac7, 0x0c0c4f51, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18196=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc5f8d9, 0xcaad92ee, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17165=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc4a815, 0x090d4ab9, 0xbfc47ae1, 0x47ae1458},			/* -0.16137=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc35866, 0x196ac71e, 0xbfc33333, 0x33333310},			/* -0.15113=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc209ba, 0x89279ba7, 0xbfc1eb85, 0x1eb851c8},			/* -0.14092=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc0bc00, 0x1c99135d, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13073=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbede49, 0x95e55a38, 0xbfbeb851, 0xeb851e71},			/* -0.12057=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc462d, 0x748f42c5, 0xbfbc28f5, 0xc28f5be2},			/* -0.11044=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb9af88, 0x77430b39, 0xbfb99999, 0x99999953},			/* -0.10033=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb71a37, 0x8e5461ea, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09024=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb48617, 0xf0ce2c03, 0xbfb47ae1, 0x47ae1435},			/* -0.08017=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1f307, 0x1508a3a2, 0xbfb1eb85, 0x1eb851a6},			/* -0.07011=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaec1c5, 0x52b6f47b, 0xbfaeb851, 0xeb851e2d},			/* -0.06007=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99f11, 0x19d15be5, 0xbfa99999, 0x9999990e},			/* -0.05004=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47dad, 0x90f9a68b, 0xbfa47ae1, 0x47ae13ef},			/* -0.04002=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9ebaae, 0x1e069446, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947b94, 0x43fee8b6, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847b0e, 0x05625d64, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847b0e, 0x056261c9, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947b94, 0x43feeae8, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9ebaae, 0x1e069678, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47dad, 0x90f9a7a3, 0x3fa47ae1, 0x47ae1508},			/* 0.04002=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99f11, 0x19d15cff, 0x3fa99999, 0x99999a27},			/* 0.05004=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faec1c5, 0x52b6f595, 0x3faeb851, 0xeb851f46},			/* 0.06007=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1f307, 0x1508a42f, 0x3fb1eb85, 0x1eb85232},			/* 0.07011=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb48617, 0xf0ce2c90, 0x3fb47ae1, 0x47ae14c1},			/* 0.08017=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb71a37, 0x8e546278, 0x3fb70a3d, 0x70a3d750},			/* 0.09024=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb9af88, 0x77430bc6, 0x3fb99999, 0x999999df},			/* 0.10033=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc462d, 0x748f4352, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11044=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbede49, 0x95e55ac6, 0x3fbeb851, 0xeb851efd},			/* 0.12057=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc0bc00, 0x1c9913a5, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13073=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc209ba, 0x89279bef, 0x3fc1eb85, 0x1eb8520e},			/* 0.14092=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc35866, 0x196ac767, 0x3fc33333, 0x33333356},			/* 0.15113=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc4a815, 0x090d4b02, 0x3fc47ae1, 0x47ae149e},			/* 0.16137=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc5f8d9, 0xcaad9335, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17165=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc74ac7, 0x0c0c4f99, 0x3fc70a3d, 0x70a3d72e},			/* 0.18196=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc89def, 0xba561876, 0x3fc851eb, 0x851eb876},			/* 0.19231=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc9f267, 0x068a5611, 0x3fc99999, 0x999999be},			/* 0.20271=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fcb4840, 0x6a01a8da, 0x3fcae147, 0xae147b06},			/* 0.21314=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcc9f8f, 0xab162b24, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22361=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fcdf868, 0xe1f000d7, 0x3fcd70a3, 0xd70a3d96},			/* 0.23414=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fcf52e0, 0x7d78c76f, 0x3fceb851, 0xeb851ede},			/* 0.24471=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fd05785, 0xa43c4c6a, 0x3fd00000, 0x00000013},			/* 0.25534=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd1067f, 0x376fbb6b, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26602=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd1b667, 0xc19f0d48, 0x3fd147ae, 0x147ae15b},			/* 0.27675=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd2674a, 0x4238a5ea, 0x3fd1eb85, 0x1eb851ff},			/* 0.28755=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd31931, 0xf1c18844, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29841=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd3cc2a, 0x44e299ad, 0x3fd33333, 0x33333347},			/* 0.30933=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd4803e, 0xef9469e5, 0x3fd3d70a, 0x3d70a3eb},			/* 0.32032=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd5357b, 0xe86b747c, 0x3fd47ae1, 0x47ae148f},			/* 0.33138=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd5ebed, 0x6c06eda6, 0x3fd51eb8, 0x51eb8533},			/* 0.34252=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd6a3a0, 0x00a44ca3, 0x3fd5c28f, 0x5c28f5d7},			/* 0.35373=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd75ca0, 0x79d9e7fc, 0x3fd66666, 0x6666667b},			/* 0.36502=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd816fb, 0xfc7b1d1a, 0x3fd70a3d, 0x70a3d71f},			/* 0.37640=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd8d2c0, 0x02a8a479, 0x3fd7ae14, 0x7ae147c3},			/* 0.38786=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd98ffa, 0x600fdec0, 0x3fd851eb, 0x851eb867},			/* 0.39941=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fda4eb9, 0x465c1599, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41105=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fdb0f0b, 0x49dcdcf1, 0x3fd99999, 0x999999af},			/* 0.42279=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fdbd0ff, 0x6664f7aa, 0x3fda3d70, 0xa3d70a53},			/* 0.43463=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fdc94a5, 0x04655ccb, 0x3fdae147, 0xae147af7},			/* 0.44657=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fdd5a0b, 0xfe483992, 0x3fdb851e, 0xb851eb9b},			/* 0.45862=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fde2144, 0xa61010d6, 0x3fdc28f5, 0xc28f5c3f},			/* 0.47078=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdeea5f, 0xcb3f61ce, 0x3fdccccc, 0xcccccce3},			/* 0.48305=f(0.45000)*/
-{63, 0,123,__LINE__, 0x3fdfb56e, 0xc10d9036, 0x3fdd70a3, 0xd70a3d87},			/* 0.49544=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fe04141, 0xb2770f00, 0x3fde147a, 0xe147ae2b},			/* 0.50796=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fe0a8d8, 0x12b7d239, 0x3fdeb851, 0xeb851ecf},			/* 0.52061=f(0.48000)*/
-{62, 0,123,__LINE__, 0x3fe11184, 0x04bc2fe5, 0x3fdf5c28, 0xf5c28f73},			/* 0.53338=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fe17b4f, 0x5bf34759, 0x3fe00000, 0x0000000b},			/* 0.54630=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fe1e644, 0x3fcdaefb, 0x3fe051eb, 0x851eb85d},			/* 0.55935=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fe2526d, 0x2ffbcd6d, 0x3fe0a3d7, 0x0a3d70af},			/* 0.57256=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fe2bfd5, 0x08e8f986, 0x3fe0f5c2, 0x8f5c2901},			/* 0.58591=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fe32e87, 0x08779173, 0x3fe147ae, 0x147ae153},			/* 0.59942=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe39e8e, 0xd3028c89, 0x3fe19999, 0x999999a5},			/* 0.61310=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe40ff8, 0x78a9666a, 0x3fe1eb85, 0x1eb851f7},			/* 0.62694=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe482d0, 0x7aeba521, 0x3fe23d70, 0xa3d70a49},			/* 0.64096=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe4f723, 0xd299a7d5, 0x3fe28f5c, 0x28f5c29b},			/* 0.65516=f(0.58000)*/
-{61, 0,123,__LINE__, 0x3fe56cff, 0xf620e20b, 0x3fe2e147, 0xae147aed},			/* 0.66955=f(0.59000)*/
-{62, 0,123,__LINE__, 0x3fe5e472, 0xe03a281d, 0x3fe33333, 0x3333333f},			/* 0.68413=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe65d8b, 0x17013eec, 0x3fe3851e, 0xb851eb91},			/* 0.69891=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe6d857, 0xb37d7b38, 0x3fe3d70a, 0x3d70a3e3},			/* 0.71390=f(0.62000)*/
-{61, 0,123,__LINE__, 0x3fe754e8, 0x69a3e653, 0x3fe428f5, 0xc28f5c35},			/* 0.72911=f(0.63000)*/
-{64, 0,123,__LINE__, 0x3fe7d34d, 0x90dc17a7, 0x3fe47ae1, 0x47ae1487},			/* 0.74454=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe85398, 0x2d11be4c, 0x3fe4cccc, 0xccccccd9},			/* 0.76020=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe8d5d9, 0xf85db610, 0x3fe51eb8, 0x51eb852b},			/* 0.77610=f(0.66000)*/
-{63, 0,123,__LINE__, 0x3fe95a25, 0x6d527996, 0x3fe570a3, 0xd70a3d7d},			/* 0.79225=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe9e08d, 0xd1f8d2a8, 0x3fe5c28f, 0x5c28f5cf},			/* 0.80866=f(0.68000)*/
-{58, 0,123,__LINE__, 0x3fea6927, 0x438ad4df, 0x3fe6147a, 0xe147ae21},			/* 0.82533=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3feaf406, 0xc2fc78c3, 0x3fe66666, 0x66666673},			/* 0.84228=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3feb8142, 0x42629a0b, 0x3fe6b851, 0xeb851ec5},			/* 0.85952=f(0.71000)*/
-{64, 0,123,__LINE__, 0x3fec10f0, 0xb34aaeb4, 0x3fe70a3d, 0x70a3d717},			/* 0.87706=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3feca32a, 0x16174b05, 0x3fe75c28, 0xf5c28f69},			/* 0.89491=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fed3807, 0x8a77750a, 0x3fe7ae14, 0x7ae147bb},			/* 0.91308=f(0.74000)*/
-{63, 0,123,__LINE__, 0x3fedcfa3, 0x6110ef04, 0x3fe80000, 0x0000000d},			/* 0.93159=f(0.75000)*/
-{64, 0,123,__LINE__, 0x3fee6a19, 0x2e780214, 0x3fe851eb, 0x851eb85f},			/* 0.95045=f(0.76000)*/
-{63, 0,123,__LINE__, 0x3fef0785, 0xdf91f8b8, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.96966=f(0.77000)*/
-{58, 0,123,__LINE__, 0x3fefa807, 0xcf826c5d, 0x3fe8f5c2, 0x8f5c2903},			/* 0.98926=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3ff025df, 0x6fa369cc, 0x3fe947ae, 0x147ae155},			/* 1.00924=f(0.79000)*/
-{60, 0,123,__LINE__, 0x3ff07966, 0x4793b619, 0x3fe99999, 0x999999a7},			/* 1.02963=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3ff0ceaa, 0x0d145c07, 0x3fe9eb85, 0x1eb851f9},			/* 1.05045=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3ff125bd, 0x49d6af78, 0x3fea3d70, 0xa3d70a4b},			/* 1.07171=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3ff17eb3, 0x83beb840, 0x3fea8f5c, 0x28f5c29d},			/* 1.09343=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3ff1d9a1, 0x4e36e764, 0x3feae147, 0xae147aef},			/* 1.11563=f(0.84000)*/
-{64, 0,123,__LINE__, 0x3ff2369c, 0x5cf4879c, 0x3feb3333, 0x33333341},			/* 1.13833=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3ff295bb, 0x98513cbe, 0x3feb851e, 0xb851eb93},			/* 1.16155=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3ff2f717, 0x33620b3c, 0x3febd70a, 0x3d70a3e5},			/* 1.18532=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3ff35ac8, 0xc3f910d0, 0x3fec28f5, 0xc28f5c37},			/* 1.20966=f(0.88000)*/
-{64, 0,123,__LINE__, 0x3ff3c0eb, 0x5cc46582, 0x3fec7ae1, 0x47ae1489},			/* 1.23459=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3ff4299b, 0xa9c2a14a, 0x3feccccc, 0xccccccdb},			/* 1.26015=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3ff494f8, 0x0f4c58b7, 0x3fed1eb8, 0x51eb852d},			/* 1.28636=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3ff50320, 0xcbf9abde, 0x3fed70a3, 0xd70a3d7f},			/* 1.31326=f(0.92000)*/
-{63, 0,123,__LINE__, 0x3ff57438, 0x1db3e317, 0x3fedc28f, 0x5c28f5d1},			/* 1.34087=f(0.93000)*/
-{63, 0,123,__LINE__, 0x3ff5e862, 0x6a4d39e3, 0x3fee147a, 0xe147ae23},			/* 1.36923=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3ff65fc6, 0x6c049574, 0x3fee6666, 0x66666675},			/* 1.39838=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3ff6da8d, 0x6268377b, 0x3feeb851, 0xeb851ec7},			/* 1.42835=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3ff758e3, 0x4819d034, 0x3fef0a3d, 0x70a3d719},			/* 1.45920=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3ff7daf7, 0x0e07fa74, 0x3fef5c28, 0xf5c28f6b},			/* 1.49095=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3ff860fa, 0xdcc5907c, 0x3fefae14, 0x7ae147bd},			/* 1.52367=f(0.99000)*/
-{63, 0,123,__LINE__, 0x3ff8eb24, 0x5cbee3bd, 0x3ff00000, 0x00000007},			/* 1.55740=f(1.00000)*/
-{61, 0,123,__LINE__, 0x3ff979ad, 0x062846b5, 0x3ff028f5, 0xc28f5c30},			/* 1.59220=f(1.01000)*/
-{62, 0,123,__LINE__, 0x3ffa0cd2, 0x79a1370a, 0x3ff051eb, 0x851eb859},			/* 1.62813=f(1.02000)*/
-{64, 0,123,__LINE__, 0x3ffaa4d6, 0xe2aca316, 0x3ff07ae1, 0x47ae1482},			/* 1.66524=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3ffb4201, 0x654a4066, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.70361=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3ffbe49e, 0x982fe6cb, 0x3ff0cccc, 0xccccccd4},			/* 1.74331=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3ffc8d01, 0x0d5dddad, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.78442=f(1.06000)*/
-{63, 0,123,__LINE__, 0x3ffd3b81, 0xeb0fcacf, 0x3ff11eb8, 0x51eb8526},			/* 1.82702=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3ffdf081, 0x975fac71, 0x3ff147ae, 0x147ae14f},			/* 1.87121=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3ffeac68, 0x7953b060, 0x3ff170a3, 0xd70a3d78},			/* 1.91709=f(1.09000)*/
-{63, 0,123,__LINE__, 0x3fff6fa7, 0xd2862171, 0x3ff19999, 0x999999a1},			/* 1.96476=f(1.10000)*/
-{64, 0,123,__LINE__, 0x40001d5d, 0x5a92169e, 0x3ff1c28f, 0x5c28f5ca},			/* 2.01433=f(1.11000)*/
-{64, 0,123,__LINE__, 0x40008713, 0x8d550717, 0x3ff1eb85, 0x1eb851f3},			/* 2.06595=f(1.12000)*/
-{64, 0,123,__LINE__, 0x4000f53f, 0x9047cd58, 0x3ff2147a, 0xe147ae1c},			/* 2.11975=f(1.13000)*/
-{64, 0,123,__LINE__, 0x40016831, 0x3887b2fa, 0x3ff23d70, 0xa3d70a45},			/* 2.17587=f(1.14000)*/
-{64, 0,123,__LINE__, 0x4001e03f, 0xefaf53e1, 0x3ff26666, 0x6666666e},			/* 2.23449=f(1.15000)*/
-{64, 0,123,__LINE__, 0x40025dcb, 0xa00cf2ea, 0x3ff28f5c, 0x28f5c297},			/* 2.29579=f(1.16000)*/
-{64, 0,123,__LINE__, 0x4002e13d, 0xc435202c, 0x3ff2b851, 0xeb851ec0},			/* 2.35998=f(1.17000)*/
-{64, 0,123,__LINE__, 0x40036b0a, 0xa04728d0, 0x3ff2e147, 0xae147ae9},			/* 2.42726=f(1.18000)*/
-{64, 0,123,__LINE__, 0x4003fbb2, 0xac8d6e26, 0x3ff30a3d, 0x70a3d712},			/* 2.49789=f(1.19000)*/
-{27, 0,123,__LINE__, 0x3cb1a620, 0x00000000, 0xc01921fb, 0x54442d18},			/* 2.44928e-16=f(-6.28318)*/
-{27, 0,123,__LINE__, 0xc3335715, 0xc89e712f, 0xc012d97c, 0x7f3321d2},			/* -5.44378e+15=f(-4.71238)*/
-{27, 0,123,__LINE__, 0x3ca1a620, 0x00000000, 0xc00921fb, 0x54442d18},			/* 1.22464e-16=f(-3.14159)*/
-{26, 0,123,__LINE__, 0xc34d02a0, 0xaceda9c7, 0xbff921fb, 0x54442d18},			/* -1.63313e+16=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{26, 0,123,__LINE__, 0x434d02a0, 0xaceda9c7, 0x3ff921fb, 0x54442d18},			/* 1.63313e+16=f(1.57079)*/
-{27, 0,123,__LINE__, 0xbca1a620, 0x00000000, 0x400921fb, 0x54442d18},			/* -1.22464e-16=f(3.14159)*/
-{27, 0,123,__LINE__, 0x43335715, 0xc89e712f, 0x4012d97c, 0x7f3321d2},			/* 5.44378e+15=f(4.71238)*/
-{64, 0,123,__LINE__, 0x40199f0f, 0x242693c3, 0xc03e0000, 0x00000000},			/* 6.40533=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbf9a49b2, 0x510ff816, 0xc03c4ccc, 0xcccccccd},			/* -0.02567=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xc0233f61, 0xec28ea0a, 0xc03a9999, 0x9999999a},			/* -9.62379=f(-26.6000)*/
-{64, 0,123,__LINE__, 0x3fce5738, 0x470a4647, 0xc038e666, 0x66666667},			/* 0.23703=f(-24.9000)*/
-{61, 0,123,__LINE__, 0xc005210b, 0xfc3dbe54, 0xc0373333, 0x33333334},			/* -2.64113=f(-23.2000)*/
-{63, 0,123,__LINE__, 0x3fe11d9b, 0xf21d0970, 0xc0358000, 0x00000001},			/* 0.53486=f(-21.5000)*/
-{62, 0,123,__LINE__, 0xbff66527, 0x7e5f32c2, 0xc033cccc, 0xccccccce},			/* -1.39969=f(-19.8000)*/
-{64, 0,123,__LINE__, 0x3fedc8d8, 0x8c976b0e, 0xc0321999, 0x9999999b},			/* 0.93076=f(-18.1000)*/
-{62, 0,123,__LINE__, 0xbfea8540, 0x3fe57519, 0xc0306666, 0x66666668},			/* -0.82876=f(-16.4000)*/
-{64, 0,123,__LINE__, 0x3ff95c47, 0x92ef95dd, 0xc02d6666, 0x6666666a},			/* 1.58502=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xbfdda223, 0x63d46c99, 0xc02a0000, 0x00000004},			/* -0.46302=f(-13.0000)*/
-{64, 0,123,__LINE__, 0x4009764d, 0xf48e7ae2, 0xc0269999, 0x9999999e},			/* 3.18276=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xbfc6a92b, 0x1538da8a, 0xc0233333, 0x33333338},			/* -0.17703=f(-9.60000)*/
-{64, 0,123,__LINE__, 0x4035b711, 0x9feaed40, 0xc01f9999, 0x999999a3},			/* 21.7151=f(-7.90000)*/
-{64, 0,123,__LINE__, 0x3fb5583d, 0xee9078b6, 0xc018cccc, 0xccccccd6},			/* 0.08337=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xc0128ca0, 0xc62bf65f, 0xc0120000, 0x00000009},			/* -4.63733=f(-4.50000)*/
-{64, 0,123,__LINE__, 0x3fd6c100, 0x31ec6ced, 0xc0066666, 0x66666678},			/* 0.35552=f(-2.80000)*/
-{63, 0,123,__LINE__, 0xbfff6fa7, 0xd28621f9, 0xbff19999, 0x999999bd},			/* -1.96476=f(-1.10000)*/
-{64, 0,123,__LINE__, 0x3fe5e472, 0xe03a27a3, 0x3fe33333, 0x333332ec},			/* 0.68413=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbff1e84c, 0x9047c388, 0x40026666, 0x66666654},			/* -1.11921=f(2.30000)*/
-{63, 0,123,__LINE__, 0x3ff2866f, 0x9be4ddbf, 0x400fffff, 0xffffffee},			/* 1.15782=f(4.00000)*/
-{59, 0,123,__LINE__, 0xbfe51c83, 0x499b4d2f, 0x4016cccc, 0xccccccc4},			/* -0.65973=f(5.70000)*/
-{64, 0,123,__LINE__, 0x400064ef, 0x1934ec81, 0x401d9999, 0x99999991},			/* 2.04928=f(7.40000)*/
-{64, 0,123,__LINE__, 0xbfd58c80, 0x5d64d043, 0x40223333, 0x3333332f},			/* -0.33670=f(9.10000)*/
-{64, 0,123,__LINE__, 0x401430ef, 0x6b305cef, 0x40259999, 0x99999995},			/* 5.04778=f(10.8000)*/
-{64, 0,123,__LINE__, 0xbfb10410, 0x0d0681dd, 0x4028ffff, 0xfffffffb},			/* -0.06646=f(12.5000)*/
-{64, 0,123,__LINE__, 0xc02fc9d9, 0xb26ed77b, 0x402c6666, 0x66666661},			/* -15.8942=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3fc8e32b, 0xf9e67cb7, 0x402fcccc, 0xccccccc7},			/* 0.19443=f(15.9000)*/
-{64, 0,123,__LINE__, 0xc0080a76, 0xc02a4902, 0x40319999, 0x99999997},			/* -3.00510=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3fdef359, 0x829ee0fa, 0x40334ccc, 0xccccccca},			/* 0.48360=f(19.3000)*/
-{64, 0,123,__LINE__, 0xbff870a2, 0x4bce3344, 0x4034ffff, 0xfffffffd},			/* -1.52749=f(21.0000)*/
-{64, 0,123,__LINE__, 0x3feb70ea, 0x1a297e19, 0x4036b333, 0x33333330},			/* 0.85753=f(22.7000)*/
-{61, 0,123,__LINE__, 0xbfeccbb4, 0x686d348a, 0x40386666, 0x66666663},			/* -0.89986=f(24.4000)*/
-{63, 0,123,__LINE__, 0x3ff735e4, 0x5e7305e1, 0x403a1999, 0x99999996},			/* 1.45065=f(26.1000)*/
-{64, 0,123,__LINE__, 0xbfe06e04, 0xfc5ca3b7, 0x403bcccc, 0xccccccc9},			/* -0.51343=f(27.8000)*/
-{63, 0,123,__LINE__, 0x4006407d, 0xaf0ccd5f, 0x403d7fff, 0xfffffffc},			/* 2.78149=f(29.5000)*/
-0,};
-test_tan(m)   {run_vector_1(m,tan_vec,(char *)(tan),"tan","dd");   }	
diff --git a/newlib/libm/test/tanf_vec.c b/newlib/libm/test/tanf_vec.c
deleted file mode 100644
index e6106e78a..000000000
--- a/newlib/libm/test/tanf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type tanf_vec[] = {
-{ 1, 0,123,__LINE__, 0xc00493c4, 0x60a46c17, 0xbff33333, 0x33333333},			/* -2.57215=f(-1.20000)*/
-{ 1, 0,123,__LINE__, 0xc003fbb2, 0xd945e787, 0xbff30a3d, 0x70a3d70a},			/* -2.49790=f(-1.19000)*/
-{ 1, 0,123,__LINE__, 0xc0036b0a, 0x697947b9, 0xbff2e147, 0xae147ae1},			/* -2.42726=f(-1.18000)*/
-{ 1, 0,123,__LINE__, 0xc002e13d, 0x9fc3ce6f, 0xbff2b851, 0xeb851eb8},			/* -2.35998=f(-1.17000)*/
-{ 1, 0,123,__LINE__, 0xc0025dcb, 0x75d83ff1, 0xbff28f5c, 0x28f5c28f},			/* -2.29579=f(-1.16000)*/
-{ 1, 0,123,__LINE__, 0xc001e03f, 0xd68293e3, 0xbff26666, 0x66666666},			/* -2.23449=f(-1.15000)*/
-{ 1, 0,123,__LINE__, 0xc0016831, 0x1d167463, 0xbff23d70, 0xa3d70a3d},			/* -2.17587=f(-1.14000)*/
-{ 1, 0,123,__LINE__, 0xc000f53f, 0x76ea55a9, 0xbff2147a, 0xe147ae14},			/* -2.11975=f(-1.13000)*/
-{ 1, 0,123,__LINE__, 0xc0008713, 0x8be051ea, 0xbff1eb85, 0x1eb851eb},			/* -2.06595=f(-1.12000)*/
-{ 1, 0,123,__LINE__, 0xc0001d5d, 0x5f776659, 0xbff1c28f, 0x5c28f5c2},			/* -2.01433=f(-1.11000)*/
-{12, 0,123,__LINE__, 0xbfff6fa7, 0xeae23a93, 0xbff19999, 0x99999999},			/* -1.96476=f(-1.10000)*/
-{12, 0,123,__LINE__, 0xbffeac68, 0x9d7c22ff, 0xbff170a3, 0xd70a3d70},			/* -1.91709=f(-1.09000)*/
-{12, 0,123,__LINE__, 0xbffdf081, 0x9f873dbf, 0xbff147ae, 0x147ae147},			/* -1.87121=f(-1.08000)*/
-{12, 0,123,__LINE__, 0xbffd3b82, 0x4a60b096, 0xbff11eb8, 0x51eb851e},			/* -1.82702=f(-1.07000)*/
-{12, 0,123,__LINE__, 0xbffc8d00, 0xd97f0c46, 0xbff0f5c2, 0x8f5c28f5},			/* -1.78442=f(-1.06000)*/
-{12, 0,123,__LINE__, 0xbffbe49e, 0x8f515157, 0xbff0cccc, 0xcccccccc},			/* -1.74331=f(-1.05000)*/
-{12, 0,123,__LINE__, 0xbffb4201, 0x4882fd2c, 0xbff0a3d7, 0x0a3d70a3},			/* -1.70361=f(-1.04000)*/
-{12, 0,123,__LINE__, 0xbffaa4d6, 0xdfc58e3b, 0xbff07ae1, 0x47ae147a},			/* -1.66524=f(-1.03000)*/
-{12, 0,123,__LINE__, 0xbffa0cd2, 0x792fd5e4, 0xbff051eb, 0x851eb851},			/* -1.62813=f(-1.02000)*/
-{12, 0,123,__LINE__, 0xbff979ad, 0x0a3bf80e, 0xbff028f5, 0xc28f5c28},			/* -1.59220=f(-1.01000)*/
-{12, 0,123,__LINE__, 0xbff8eb24, 0x557be2c5, 0xbfefffff, 0xfffffffe},			/* -1.55740=f(-0.01000)*/
-{11, 0,123,__LINE__, 0xbff860fa, 0xfc5b36cb, 0xbfefae14, 0x7ae147ac},			/* -1.52367=f(-0.99000)*/
-{11, 0,123,__LINE__, 0xbff7daf7, 0x25adb72c, 0xbfef5c28, 0xf5c28f5a},			/* -1.49095=f(-0.98000)*/
-{11, 0,123,__LINE__, 0xbff758e3, 0x5c5c4bc3, 0xbfef0a3d, 0x70a3d708},			/* -1.45920=f(-0.97000)*/
-{11, 0,123,__LINE__, 0xbff6da8d, 0x465b10d3, 0xbfeeb851, 0xeb851eb6},			/* -1.42835=f(-0.96000)*/
-{11, 0,123,__LINE__, 0xbff65fc6, 0x7a1852b8, 0xbfee6666, 0x66666664},			/* -1.39838=f(-0.95000)*/
-{11, 0,123,__LINE__, 0xbff5e862, 0x7bea5ee0, 0xbfee147a, 0xe147ae12},			/* -1.36923=f(-0.94000)*/
-{11, 0,123,__LINE__, 0xbff57438, 0x289b5e3b, 0xbfedc28f, 0x5c28f5c0},			/* -1.34087=f(-0.93000)*/
-{11, 0,123,__LINE__, 0xbff50320, 0xdce90618, 0xbfed70a3, 0xd70a3d6e},			/* -1.31326=f(-0.92000)*/
-{11, 0,123,__LINE__, 0xbff494f8, 0x1ca9a021, 0xbfed1eb8, 0x51eb851c},			/* -1.28636=f(-0.91000)*/
-{11, 0,123,__LINE__, 0xbff4299b, 0xb677a625, 0xbfeccccc, 0xccccccca},			/* -1.26015=f(-0.90000)*/
-{11, 0,123,__LINE__, 0xbff3c0eb, 0x5d6dc71b, 0xbfec7ae1, 0x47ae1478},			/* -1.23459=f(-0.89000)*/
-{11, 0,123,__LINE__, 0xbff35ac8, 0xb71c3141, 0xbfec28f5, 0xc28f5c26},			/* -1.20966=f(-0.88000)*/
-{11, 0,123,__LINE__, 0xbff2f717, 0x54f79b3d, 0xbfebd70a, 0x3d70a3d4},			/* -1.18532=f(-0.87000)*/
-{11, 0,123,__LINE__, 0xbff295bb, 0xbebe939a, 0xbfeb851e, 0xb851eb82},			/* -1.16155=f(-0.86000)*/
-{11, 0,123,__LINE__, 0xbff2369c, 0x7eb294a6, 0xbfeb3333, 0x33333330},			/* -1.13833=f(-0.85000)*/
-{11, 0,123,__LINE__, 0xbff1d9a1, 0x4ce6a1cc, 0xbfeae147, 0xae147ade},			/* -1.11563=f(-0.84000)*/
-{11, 0,123,__LINE__, 0xbff17eb3, 0x91304e28, 0xbfea8f5c, 0x28f5c28c},			/* -1.09343=f(-0.83000)*/
-{11, 0,123,__LINE__, 0xbff125bd, 0x4df8fefb, 0xbfea3d70, 0xa3d70a3a},			/* -1.07171=f(-0.82000)*/
-{11, 0,123,__LINE__, 0xbff0ceaa, 0x1f93873e, 0xbfe9eb85, 0x1eb851e8},			/* -1.05045=f(-0.81000)*/
-{11, 0,123,__LINE__, 0xbff07966, 0x513a3b5a, 0xbfe99999, 0x99999996},			/* -1.02963=f(-0.80000)*/
-{11, 0,123,__LINE__, 0xbff025df, 0x6f29f2ec, 0xbfe947ae, 0x147ae144},			/* -1.00924=f(-0.79000)*/
-{13, 0,123,__LINE__, 0xbfefa807, 0xb37fe893, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.98926=f(-0.78000)*/
-{13, 0,123,__LINE__, 0xbfef0785, 0xe6cc72c0, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.96966=f(-0.77000)*/
-{13, 0,123,__LINE__, 0xbfee6a19, 0x1a5a5d47, 0xbfe851eb, 0x851eb84e},			/* -0.95045=f(-0.76000)*/
-{13, 0,123,__LINE__, 0xbfedcfa3, 0x6f0e1bb8, 0xbfe7ffff, 0xfffffffc},			/* -0.93159=f(-0.75000)*/
-{12, 0,123,__LINE__, 0xbfed3807, 0xa38f5e1e, 0xbfe7ae14, 0x7ae147aa},			/* -0.91308=f(-0.74000)*/
-{12, 0,123,__LINE__, 0xbfeca32a, 0x27dbdb5f, 0xbfe75c28, 0xf5c28f58},			/* -0.89491=f(-0.73000)*/
-{12, 0,123,__LINE__, 0xbfec10f0, 0xd1dce257, 0xbfe70a3d, 0x70a3d706},			/* -0.87706=f(-0.72000)*/
-{12, 0,123,__LINE__, 0xbfeb8142, 0x14ec2f58, 0xbfe6b851, 0xeb851eb4},			/* -0.85952=f(-0.71000)*/
-{12, 0,123,__LINE__, 0xbfeaf406, 0xb7b84f13, 0xbfe66666, 0x66666662},			/* -0.84228=f(-0.70000)*/
-{12, 0,123,__LINE__, 0xbfea6927, 0x36d404a7, 0xbfe6147a, 0xe147ae10},			/* -0.82533=f(-0.69000)*/
-{12, 0,123,__LINE__, 0xbfe9e08d, 0xcd0c4515, 0xbfe5c28f, 0x5c28f5be},			/* -0.80866=f(-0.68000)*/
-{12, 0,123,__LINE__, 0xbfe95a25, 0x8371b38d, 0xbfe570a3, 0xd70a3d6c},			/* -0.79225=f(-0.67000)*/
-{12, 0,123,__LINE__, 0xbfe8d5da, 0x0959b4d1, 0xbfe51eb8, 0x51eb851a},			/* -0.77610=f(-0.66000)*/
-{12, 0,123,__LINE__, 0xbfe85398, 0x1f2129f6, 0xbfe4cccc, 0xccccccc8},			/* -0.76020=f(-0.65000)*/
-{14, 0,123,__LINE__, 0xbfe7d34d, 0x9cd5962b, 0xbfe47ae1, 0x47ae1476},			/* -0.74454=f(-0.64000)*/
-{14, 0,123,__LINE__, 0xbfe754e8, 0x7d3a768e, 0xbfe428f5, 0xc28f5c24},			/* -0.72911=f(-0.63000)*/
-{13, 0,123,__LINE__, 0xbfe6d857, 0xa6938407, 0xbfe3d70a, 0x3d70a3d2},			/* -0.71390=f(-0.62000)*/
-{13, 0,123,__LINE__, 0xbfe65d8b, 0x3a5a9ac2, 0xbfe3851e, 0xb851eb80},			/* -0.69891=f(-0.61000)*/
-{13, 0,123,__LINE__, 0xbfe5e472, 0xf54ac1cd, 0xbfe33333, 0x3333332e},			/* -0.68413=f(-0.60000)*/
-{13, 0,123,__LINE__, 0xbfe56cff, 0xf73da40d, 0xbfe2e147, 0xae147adc},			/* -0.66955=f(-0.59000)*/
-{13, 0,123,__LINE__, 0xbfe4f723, 0xb1c7defb, 0xbfe28f5c, 0x28f5c28a},			/* -0.65516=f(-0.58000)*/
-{13, 0,123,__LINE__, 0xbfe482d0, 0x863bd3e6, 0xbfe23d70, 0xa3d70a38},			/* -0.64096=f(-0.57000)*/
-{13, 0,123,__LINE__, 0xbfe40ff8, 0x7abe2d6d, 0xbfe1eb85, 0x1eb851e6},			/* -0.62694=f(-0.56000)*/
-{14, 0,123,__LINE__, 0xbfe39e8e, 0xdcee4dab, 0xbfe19999, 0x99999994},			/* -0.61310=f(-0.55000)*/
-{14, 0,123,__LINE__, 0xbfe32e87, 0x1791a835, 0xbfe147ae, 0x147ae142},			/* -0.59942=f(-0.54000)*/
-{14, 0,123,__LINE__, 0xbfe2bfd4, 0xfeeb10a3, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.58591=f(-0.53000)*/
-{14, 0,123,__LINE__, 0xbfe2526d, 0x0988d60f, 0xbfe0a3d7, 0x0a3d709e},			/* -0.57256=f(-0.52000)*/
-{15, 0,123,__LINE__, 0xbfe1e644, 0x2ff16a35, 0xbfe051eb, 0x851eb84c},			/* -0.55935=f(-0.51000)*/
-{15, 0,123,__LINE__, 0xbfe17b4f, 0x6c66f0e1, 0xbfdfffff, 0xfffffff4},			/* -0.54630=f(-0.50000)*/
-{10, 0,123,__LINE__, 0xbfe11183, 0xff3448f4, 0xbfdf5c28, 0xf5c28f50},			/* -0.53338=f(-0.49000)*/
-{10, 0,123,__LINE__, 0xbfe0a8d8, 0x0a4956f5, 0xbfdeb851, 0xeb851eac},			/* -0.52061=f(-0.48000)*/
-{10, 0,123,__LINE__, 0xbfe04141, 0xb4ad5c2d, 0xbfde147a, 0xe147ae08},			/* -0.50796=f(-0.47000)*/
-{14, 0,123,__LINE__, 0xbfdfb56e, 0xceae5e05, 0xbfdd70a3, 0xd70a3d64},			/* -0.49544=f(-0.46000)*/
-{14, 0,123,__LINE__, 0xbfdeea5f, 0xd110f177, 0xbfdccccc, 0xccccccc0},			/* -0.48305=f(-0.45000)*/
-{14, 0,123,__LINE__, 0xbfde2144, 0x9284fe48, 0xbfdc28f5, 0xc28f5c1c},			/* -0.47078=f(-0.44000)*/
-{13, 0,123,__LINE__, 0xbfdd5a0c, 0x033c25a0, 0xbfdb851e, 0xb851eb78},			/* -0.45862=f(-0.43000)*/
-{13, 0,123,__LINE__, 0xbfdc94a5, 0x0a6220fa, 0xbfdae147, 0xae147ad4},			/* -0.44657=f(-0.42000)*/
-{15, 0,123,__LINE__, 0xbfdbd0ff, 0x60047876, 0xbfda3d70, 0xa3d70a30},			/* -0.43463=f(-0.41000)*/
-{14, 0,123,__LINE__, 0xbfdb0f0b, 0x4978206b, 0xbfd99999, 0x9999998c},			/* -0.42279=f(-0.40000)*/
-{14, 0,123,__LINE__, 0xbfda4eb9, 0x401b707d, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.41105=f(-0.39000)*/
-{15, 0,123,__LINE__, 0xbfd98ffa, 0x4e05150d, 0xbfd851eb, 0x851eb844},			/* -0.39941=f(-0.38000)*/
-{12, 0,123,__LINE__, 0xbfd8d2c0, 0x07dca0a5, 0xbfd7ae14, 0x7ae147a0},			/* -0.38786=f(-0.37000)*/
-{12, 0,123,__LINE__, 0xbfd816fc, 0x07412ce9, 0xbfd70a3d, 0x70a3d6fc},			/* -0.37640=f(-0.36000)*/
-{15, 0,123,__LINE__, 0xbfd75ca0, 0x82a3500f, 0xbfd66666, 0x66666658},			/* -0.36502=f(-0.35000)*/
-{14, 0,123,__LINE__, 0xbfd6a3a0, 0x09c992e0, 0xbfd5c28f, 0x5c28f5b4},			/* -0.35373=f(-0.34000)*/
-{16, 0,123,__LINE__, 0xbfd5ebed, 0x814343f4, 0xbfd51eb8, 0x51eb8510},			/* -0.34252=f(-0.33000)*/
-{15, 0,123,__LINE__, 0xbfd5357b, 0xe63018f6, 0xbfd47ae1, 0x47ae146c},			/* -0.33138=f(-0.32000)*/
-{13, 0,123,__LINE__, 0xbfd4803e, 0xea116264, 0xbfd3d70a, 0x3d70a3c8},			/* -0.32032=f(-0.31000)*/
-{16, 0,123,__LINE__, 0xbfd3cc2a, 0x5ad65335, 0xbfd33333, 0x33333324},			/* -0.30933=f(-0.30000)*/
-{15, 0,123,__LINE__, 0xbfd31931, 0xe060c520, 0xbfd28f5c, 0x28f5c280},			/* -0.29841=f(-0.29000)*/
-{14, 0,123,__LINE__, 0xbfd2674a, 0x365ed2ae, 0xbfd1eb85, 0x1eb851dc},			/* -0.28755=f(-0.28000)*/
-{16, 0,123,__LINE__, 0xbfd1b667, 0xbd871769, 0xbfd147ae, 0x147ae138},			/* -0.27675=f(-0.27000)*/
-{15, 0,123,__LINE__, 0xbfd1067f, 0x22f340e2, 0xbfd0a3d7, 0x0a3d7094},			/* -0.26602=f(-0.26000)*/
-{17, 0,123,__LINE__, 0xbfd05785, 0xa2aa8f5d, 0xbfcfffff, 0xffffffe0},			/* -0.25534=f(-0.25000)*/
-{15, 0,123,__LINE__, 0xbfcf52e0, 0x751724d3, 0xbfceb851, 0xeb851e98},			/* -0.24471=f(-0.24000)*/
-{16, 0,123,__LINE__, 0xbfcdf868, 0xde3343a6, 0xbfcd70a3, 0xd70a3d50},			/* -0.23414=f(-0.23000)*/
-{16, 0,123,__LINE__, 0xbfcc9f8f, 0xa9db8e2b, 0xbfcc28f5, 0xc28f5c08},			/* -0.22361=f(-0.22000)*/
-{15, 0,123,__LINE__, 0xbfcb4840, 0x5ef1cde7, 0xbfcae147, 0xae147ac0},			/* -0.21314=f(-0.21000)*/
-{17, 0,123,__LINE__, 0xbfc9f267, 0x18b23cb5, 0xbfc99999, 0x99999978},			/* -0.20271=f(-0.20000)*/
-{16, 0,123,__LINE__, 0xbfc89def, 0xcd08bbff, 0xbfc851eb, 0x851eb830},			/* -0.19231=f(-0.19000)*/
-{17, 0,123,__LINE__, 0xbfc74ac7, 0x1ea87149, 0xbfc70a3d, 0x70a3d6e8},			/* -0.18196=f(-0.18000)*/
-{18, 0,123,__LINE__, 0xbfc5f8d9, 0xce721592, 0xbfc5c28f, 0x5c28f5a0},			/* -0.17165=f(-0.17000)*/
-{16, 0,123,__LINE__, 0xbfc4a814, 0xfe573588, 0xbfc47ae1, 0x47ae1458},			/* -0.16137=f(-0.16000)*/
-{17, 0,123,__LINE__, 0xbfc35866, 0x273726ca, 0xbfc33333, 0x33333310},			/* -0.15113=f(-0.15000)*/
-{14, 0,123,__LINE__, 0xbfc209ba, 0x880c5f49, 0xbfc1eb85, 0x1eb851c8},			/* -0.14092=f(-0.14000)*/
-{19, 0,123,__LINE__, 0xbfc0bc00, 0x2285a47a, 0xbfc0a3d7, 0x0a3d7080},			/* -0.13073=f(-0.13000)*/
-{17, 0,123,__LINE__, 0xbfbede49, 0x9104b8d8, 0xbfbeb851, 0xeb851e71},			/* -0.12057=f(-0.12000)*/
-{17, 0,123,__LINE__, 0xbfbc462d, 0x5b22fd0b, 0xbfbc28f5, 0xc28f5be2},			/* -0.11044=f(-0.11000)*/
-{18, 0,123,__LINE__, 0xbfb9af88, 0x775294d2, 0xbfb99999, 0x99999953},			/* -0.10033=f(-0.00100)*/
-{19, 0,123,__LINE__, 0xbfb71a37, 0x986fb16c, 0xbfb70a3d, 0x70a3d6c4},			/* -0.09024=f(-0.09000)*/
-{16, 0,123,__LINE__, 0xbfb48617, 0xe06053a2, 0xbfb47ae1, 0x47ae1435},			/* -0.08017=f(-0.08000)*/
-{19, 0,123,__LINE__, 0xbfb1f307, 0x1446b81c, 0xbfb1eb85, 0x1eb851a6},			/* -0.07011=f(-0.07000)*/
-{17, 0,123,__LINE__, 0xbfaec1c5, 0x462ce097, 0xbfaeb851, 0xeb851e2d},			/* -0.06007=f(-0.06000)*/
-{21, 0,123,__LINE__, 0xbfa99f11, 0x2eccbf2c, 0xbfa99999, 0x9999990e},			/* -0.05004=f(-0.05000)*/
-{21, 0,123,__LINE__, 0xbfa47dad, 0x91e06543, 0xbfa47ae1, 0x47ae13ef},			/* -0.04002=f(-0.04000)*/
-{22, 0,123,__LINE__, 0xbf9ebaae, 0x24cfb752, 0xbf9eb851, 0xeb851da0},			/* -0.03000=f(-0.03000)*/
-{23, 0,123,__LINE__, 0xbf947b94, 0x37e95c0b, 0xbf947ae1, 0x47ae1362},			/* -0.02000=f(-0.02000)*/
-{23, 0,123,__LINE__, 0xbf847b0e, 0x045fdf61, 0xbf847ae1, 0x47ae1249},			/* -0.01000=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{23, 0,123,__LINE__, 0x3f847b0e, 0x045fdf61, 0x3f847ae1, 0x47ae16ad},			/* 0.01000=f(0.01000)*/
-{23, 0,123,__LINE__, 0x3f947b94, 0x37e95c0b, 0x3f947ae1, 0x47ae1594},			/* 0.02000=f(0.02000)*/
-{22, 0,123,__LINE__, 0x3f9ebaae, 0x24cfb752, 0x3f9eb851, 0xeb851fd2},			/* 0.03000=f(0.03000)*/
-{21, 0,123,__LINE__, 0x3fa47dad, 0x91e06543, 0x3fa47ae1, 0x47ae1508},			/* 0.04002=f(0.04000)*/
-{21, 0,123,__LINE__, 0x3fa99f11, 0x2eccbf2c, 0x3fa99999, 0x99999a27},			/* 0.05004=f(0.05000)*/
-{17, 0,123,__LINE__, 0x3faec1c5, 0x462ce097, 0x3faeb851, 0xeb851f46},			/* 0.06007=f(0.06000)*/
-{19, 0,123,__LINE__, 0x3fb1f307, 0x1446b81c, 0x3fb1eb85, 0x1eb85232},			/* 0.07011=f(0.07000)*/
-{16, 0,123,__LINE__, 0x3fb48617, 0xe06053a2, 0x3fb47ae1, 0x47ae14c1},			/* 0.08017=f(0.08000)*/
-{19, 0,123,__LINE__, 0x3fb71a37, 0x986fb16c, 0x3fb70a3d, 0x70a3d750},			/* 0.09024=f(0.09000)*/
-{18, 0,123,__LINE__, 0x3fb9af88, 0x775294d2, 0x3fb99999, 0x999999df},			/* 0.10033=f(0.10000)*/
-{17, 0,123,__LINE__, 0x3fbc462d, 0x5b22fd0b, 0x3fbc28f5, 0xc28f5c6e},			/* 0.11044=f(0.11000)*/
-{17, 0,123,__LINE__, 0x3fbede49, 0x9104b8d8, 0x3fbeb851, 0xeb851efd},			/* 0.12057=f(0.12000)*/
-{19, 0,123,__LINE__, 0x3fc0bc00, 0x2285a47a, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.13073=f(0.13000)*/
-{14, 0,123,__LINE__, 0x3fc209ba, 0x880c5f49, 0x3fc1eb85, 0x1eb8520e},			/* 0.14092=f(0.14000)*/
-{17, 0,123,__LINE__, 0x3fc35866, 0x273726ca, 0x3fc33333, 0x33333356},			/* 0.15113=f(0.15000)*/
-{16, 0,123,__LINE__, 0x3fc4a814, 0xfe573588, 0x3fc47ae1, 0x47ae149e},			/* 0.16137=f(0.16000)*/
-{18, 0,123,__LINE__, 0x3fc5f8d9, 0xce721592, 0x3fc5c28f, 0x5c28f5e6},			/* 0.17165=f(0.17000)*/
-{17, 0,123,__LINE__, 0x3fc74ac7, 0x1ea87149, 0x3fc70a3d, 0x70a3d72e},			/* 0.18196=f(0.18000)*/
-{16, 0,123,__LINE__, 0x3fc89def, 0xcd08bbff, 0x3fc851eb, 0x851eb876},			/* 0.19231=f(0.19000)*/
-{17, 0,123,__LINE__, 0x3fc9f267, 0x18b23cb5, 0x3fc99999, 0x999999be},			/* 0.20271=f(0.20000)*/
-{15, 0,123,__LINE__, 0x3fcb4840, 0x5ef1cde7, 0x3fcae147, 0xae147b06},			/* 0.21314=f(0.21000)*/
-{16, 0,123,__LINE__, 0x3fcc9f8f, 0xa9db8e2b, 0x3fcc28f5, 0xc28f5c4e},			/* 0.22361=f(0.22000)*/
-{16, 0,123,__LINE__, 0x3fcdf868, 0xde3343a6, 0x3fcd70a3, 0xd70a3d96},			/* 0.23414=f(0.23000)*/
-{15, 0,123,__LINE__, 0x3fcf52e0, 0x751724d3, 0x3fceb851, 0xeb851ede},			/* 0.24471=f(0.24000)*/
-{17, 0,123,__LINE__, 0x3fd05785, 0xa2aa8f5d, 0x3fd00000, 0x00000013},			/* 0.25534=f(0.25000)*/
-{15, 0,123,__LINE__, 0x3fd1067f, 0x22f340e2, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.26602=f(0.26000)*/
-{16, 0,123,__LINE__, 0x3fd1b667, 0xbd871769, 0x3fd147ae, 0x147ae15b},			/* 0.27675=f(0.27000)*/
-{14, 0,123,__LINE__, 0x3fd2674a, 0x365ed2ae, 0x3fd1eb85, 0x1eb851ff},			/* 0.28755=f(0.28000)*/
-{15, 0,123,__LINE__, 0x3fd31931, 0xe060c520, 0x3fd28f5c, 0x28f5c2a3},			/* 0.29841=f(0.29000)*/
-{16, 0,123,__LINE__, 0x3fd3cc2a, 0x5ad65335, 0x3fd33333, 0x33333347},			/* 0.30933=f(0.30000)*/
-{13, 0,123,__LINE__, 0x3fd4803e, 0xea116264, 0x3fd3d70a, 0x3d70a3eb},			/* 0.32032=f(0.31000)*/
-{15, 0,123,__LINE__, 0x3fd5357b, 0xe63018f6, 0x3fd47ae1, 0x47ae148f},			/* 0.33138=f(0.32000)*/
-{16, 0,123,__LINE__, 0x3fd5ebed, 0x814343f4, 0x3fd51eb8, 0x51eb8533},			/* 0.34252=f(0.33000)*/
-{14, 0,123,__LINE__, 0x3fd6a3a0, 0x09c992e0, 0x3fd5c28f, 0x5c28f5d7},			/* 0.35373=f(0.34000)*/
-{15, 0,123,__LINE__, 0x3fd75ca0, 0x82a3500f, 0x3fd66666, 0x6666667b},			/* 0.36502=f(0.35000)*/
-{12, 0,123,__LINE__, 0x3fd816fc, 0x07412ce9, 0x3fd70a3d, 0x70a3d71f},			/* 0.37640=f(0.36000)*/
-{12, 0,123,__LINE__, 0x3fd8d2c0, 0x07dca0a5, 0x3fd7ae14, 0x7ae147c3},			/* 0.38786=f(0.37000)*/
-{15, 0,123,__LINE__, 0x3fd98ffa, 0x4e05150d, 0x3fd851eb, 0x851eb867},			/* 0.39941=f(0.38000)*/
-{14, 0,123,__LINE__, 0x3fda4eb9, 0x401b707d, 0x3fd8f5c2, 0x8f5c290b},			/* 0.41105=f(0.39000)*/
-{14, 0,123,__LINE__, 0x3fdb0f0b, 0x4978206b, 0x3fd99999, 0x999999af},			/* 0.42279=f(0.40000)*/
-{15, 0,123,__LINE__, 0x3fdbd0ff, 0x60047876, 0x3fda3d70, 0xa3d70a53},			/* 0.43463=f(0.41000)*/
-{13, 0,123,__LINE__, 0x3fdc94a5, 0x0a6220fa, 0x3fdae147, 0xae147af7},			/* 0.44657=f(0.42000)*/
-{13, 0,123,__LINE__, 0x3fdd5a0c, 0x033c25a0, 0x3fdb851e, 0xb851eb9b},			/* 0.45862=f(0.43000)*/
-{14, 0,123,__LINE__, 0x3fde2144, 0x9284fe48, 0x3fdc28f5, 0xc28f5c3f},			/* 0.47078=f(0.44000)*/
-{14, 0,123,__LINE__, 0x3fdeea5f, 0xd110f177, 0x3fdccccc, 0xcccccce3},			/* 0.48305=f(0.45000)*/
-{14, 0,123,__LINE__, 0x3fdfb56e, 0xceae5e05, 0x3fdd70a3, 0xd70a3d87},			/* 0.49544=f(0.46000)*/
-{10, 0,123,__LINE__, 0x3fe04141, 0xb4ad5c2d, 0x3fde147a, 0xe147ae2b},			/* 0.50796=f(0.47000)*/
-{10, 0,123,__LINE__, 0x3fe0a8d8, 0x0a4956f5, 0x3fdeb851, 0xeb851ecf},			/* 0.52061=f(0.48000)*/
-{10, 0,123,__LINE__, 0x3fe11183, 0xff3448f4, 0x3fdf5c28, 0xf5c28f73},			/* 0.53338=f(0.49000)*/
-{15, 0,123,__LINE__, 0x3fe17b4f, 0x6c66f0e1, 0x3fe00000, 0x0000000b},			/* 0.54630=f(0.50000)*/
-{15, 0,123,__LINE__, 0x3fe1e644, 0x2ff16a35, 0x3fe051eb, 0x851eb85d},			/* 0.55935=f(0.51000)*/
-{14, 0,123,__LINE__, 0x3fe2526d, 0x0988d60f, 0x3fe0a3d7, 0x0a3d70af},			/* 0.57256=f(0.52000)*/
-{14, 0,123,__LINE__, 0x3fe2bfd4, 0xfeeb10a3, 0x3fe0f5c2, 0x8f5c2901},			/* 0.58591=f(0.53000)*/
-{14, 0,123,__LINE__, 0x3fe32e87, 0x1791a835, 0x3fe147ae, 0x147ae153},			/* 0.59942=f(0.54000)*/
-{14, 0,123,__LINE__, 0x3fe39e8e, 0xdcee4dab, 0x3fe19999, 0x999999a5},			/* 0.61310=f(0.55000)*/
-{13, 0,123,__LINE__, 0x3fe40ff8, 0x7abe2d6d, 0x3fe1eb85, 0x1eb851f7},			/* 0.62694=f(0.56000)*/
-{13, 0,123,__LINE__, 0x3fe482d0, 0x863bd3e6, 0x3fe23d70, 0xa3d70a49},			/* 0.64096=f(0.57000)*/
-{13, 0,123,__LINE__, 0x3fe4f723, 0xb1c7defb, 0x3fe28f5c, 0x28f5c29b},			/* 0.65516=f(0.58000)*/
-{13, 0,123,__LINE__, 0x3fe56cff, 0xf73da40d, 0x3fe2e147, 0xae147aed},			/* 0.66955=f(0.59000)*/
-{13, 0,123,__LINE__, 0x3fe5e472, 0xf54ac1cd, 0x3fe33333, 0x3333333f},			/* 0.68413=f(0.60000)*/
-{13, 0,123,__LINE__, 0x3fe65d8b, 0x3a5a9ac2, 0x3fe3851e, 0xb851eb91},			/* 0.69891=f(0.61000)*/
-{13, 0,123,__LINE__, 0x3fe6d857, 0xa6938407, 0x3fe3d70a, 0x3d70a3e3},			/* 0.71390=f(0.62000)*/
-{14, 0,123,__LINE__, 0x3fe754e8, 0x7d3a768e, 0x3fe428f5, 0xc28f5c35},			/* 0.72911=f(0.63000)*/
-{14, 0,123,__LINE__, 0x3fe7d34d, 0x9cd5962b, 0x3fe47ae1, 0x47ae1487},			/* 0.74454=f(0.64000)*/
-{12, 0,123,__LINE__, 0x3fe85398, 0x1f2129f6, 0x3fe4cccc, 0xccccccd9},			/* 0.76020=f(0.65000)*/
-{12, 0,123,__LINE__, 0x3fe8d5da, 0x0959b4d1, 0x3fe51eb8, 0x51eb852b},			/* 0.77610=f(0.66000)*/
-{12, 0,123,__LINE__, 0x3fe95a25, 0x8371b38d, 0x3fe570a3, 0xd70a3d7d},			/* 0.79225=f(0.67000)*/
-{12, 0,123,__LINE__, 0x3fe9e08d, 0xcd0c4515, 0x3fe5c28f, 0x5c28f5cf},			/* 0.80866=f(0.68000)*/
-{12, 0,123,__LINE__, 0x3fea6927, 0x36d404a7, 0x3fe6147a, 0xe147ae21},			/* 0.82533=f(0.69000)*/
-{12, 0,123,__LINE__, 0x3feaf406, 0xb7b84f13, 0x3fe66666, 0x66666673},			/* 0.84228=f(0.70000)*/
-{12, 0,123,__LINE__, 0x3feb8142, 0x14ec2f58, 0x3fe6b851, 0xeb851ec5},			/* 0.85952=f(0.71000)*/
-{12, 0,123,__LINE__, 0x3fec10f0, 0xd1dce257, 0x3fe70a3d, 0x70a3d717},			/* 0.87706=f(0.72000)*/
-{12, 0,123,__LINE__, 0x3feca32a, 0x27dbdb5f, 0x3fe75c28, 0xf5c28f69},			/* 0.89491=f(0.73000)*/
-{12, 0,123,__LINE__, 0x3fed3807, 0xa38f5e1e, 0x3fe7ae14, 0x7ae147bb},			/* 0.91308=f(0.74000)*/
-{13, 0,123,__LINE__, 0x3fedcfa3, 0x6f0e1bb8, 0x3fe80000, 0x0000000d},			/* 0.93159=f(0.75000)*/
-{13, 0,123,__LINE__, 0x3fee6a19, 0x1a5a5d47, 0x3fe851eb, 0x851eb85f},			/* 0.95045=f(0.76000)*/
-{13, 0,123,__LINE__, 0x3fef0785, 0xe6cc72c0, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.96966=f(0.77000)*/
-{13, 0,123,__LINE__, 0x3fefa807, 0xb37fe893, 0x3fe8f5c2, 0x8f5c2903},			/* 0.98926=f(0.78000)*/
-{11, 0,123,__LINE__, 0x3ff025df, 0x6f29f2ec, 0x3fe947ae, 0x147ae155},			/* 1.00924=f(0.79000)*/
-{11, 0,123,__LINE__, 0x3ff07966, 0x513a3b5a, 0x3fe99999, 0x999999a7},			/* 1.02963=f(0.80000)*/
-{11, 0,123,__LINE__, 0x3ff0ceaa, 0x1f93873e, 0x3fe9eb85, 0x1eb851f9},			/* 1.05045=f(0.81000)*/
-{11, 0,123,__LINE__, 0x3ff125bd, 0x4df8fefb, 0x3fea3d70, 0xa3d70a4b},			/* 1.07171=f(0.82000)*/
-{11, 0,123,__LINE__, 0x3ff17eb3, 0x91304e28, 0x3fea8f5c, 0x28f5c29d},			/* 1.09343=f(0.83000)*/
-{11, 0,123,__LINE__, 0x3ff1d9a1, 0x4ce6a1cc, 0x3feae147, 0xae147aef},			/* 1.11563=f(0.84000)*/
-{11, 0,123,__LINE__, 0x3ff2369c, 0x7eb294a6, 0x3feb3333, 0x33333341},			/* 1.13833=f(0.85000)*/
-{11, 0,123,__LINE__, 0x3ff295bb, 0xbebe939a, 0x3feb851e, 0xb851eb93},			/* 1.16155=f(0.86000)*/
-{11, 0,123,__LINE__, 0x3ff2f717, 0x54f79b3d, 0x3febd70a, 0x3d70a3e5},			/* 1.18532=f(0.87000)*/
-{11, 0,123,__LINE__, 0x3ff35ac8, 0xb71c3141, 0x3fec28f5, 0xc28f5c37},			/* 1.20966=f(0.88000)*/
-{11, 0,123,__LINE__, 0x3ff3c0eb, 0x5d6dc71b, 0x3fec7ae1, 0x47ae1489},			/* 1.23459=f(0.89000)*/
-{11, 0,123,__LINE__, 0x3ff4299b, 0xb677a625, 0x3feccccc, 0xccccccdb},			/* 1.26015=f(0.90000)*/
-{11, 0,123,__LINE__, 0x3ff494f8, 0x1ca9a021, 0x3fed1eb8, 0x51eb852d},			/* 1.28636=f(0.91000)*/
-{11, 0,123,__LINE__, 0x3ff50320, 0xdce90618, 0x3fed70a3, 0xd70a3d7f},			/* 1.31326=f(0.92000)*/
-{11, 0,123,__LINE__, 0x3ff57438, 0x289b5e3b, 0x3fedc28f, 0x5c28f5d1},			/* 1.34087=f(0.93000)*/
-{11, 0,123,__LINE__, 0x3ff5e862, 0x7bea5ee0, 0x3fee147a, 0xe147ae23},			/* 1.36923=f(0.94000)*/
-{11, 0,123,__LINE__, 0x3ff65fc6, 0x7a1852b8, 0x3fee6666, 0x66666675},			/* 1.39838=f(0.95000)*/
-{11, 0,123,__LINE__, 0x3ff6da8d, 0x465b10d3, 0x3feeb851, 0xeb851ec7},			/* 1.42835=f(0.96000)*/
-{11, 0,123,__LINE__, 0x3ff758e3, 0x5c5c4bc3, 0x3fef0a3d, 0x70a3d719},			/* 1.45920=f(0.97000)*/
-{11, 0,123,__LINE__, 0x3ff7daf7, 0x25adb72c, 0x3fef5c28, 0xf5c28f6b},			/* 1.49095=f(0.98000)*/
-{11, 0,123,__LINE__, 0x3ff860fa, 0xfc5b36cb, 0x3fefae14, 0x7ae147bd},			/* 1.52367=f(0.99000)*/
-{12, 0,123,__LINE__, 0x3ff8eb24, 0x557be2c5, 0x3ff00000, 0x00000007},			/* 1.55740=f(1.00000)*/
-{12, 0,123,__LINE__, 0x3ff979ad, 0x0a3bf80e, 0x3ff028f5, 0xc28f5c30},			/* 1.59220=f(1.01000)*/
-{12, 0,123,__LINE__, 0x3ffa0cd2, 0x792fd5e4, 0x3ff051eb, 0x851eb859},			/* 1.62813=f(1.02000)*/
-{12, 0,123,__LINE__, 0x3ffaa4d6, 0xdfc58e3b, 0x3ff07ae1, 0x47ae1482},			/* 1.66524=f(1.03000)*/
-{12, 0,123,__LINE__, 0x3ffb4201, 0x4882fd2c, 0x3ff0a3d7, 0x0a3d70ab},			/* 1.70361=f(1.04000)*/
-{12, 0,123,__LINE__, 0x3ffbe49e, 0x8f515157, 0x3ff0cccc, 0xccccccd4},			/* 1.74331=f(1.05000)*/
-{12, 0,123,__LINE__, 0x3ffc8d00, 0xd97f0c46, 0x3ff0f5c2, 0x8f5c28fd},			/* 1.78442=f(1.06000)*/
-{12, 0,123,__LINE__, 0x3ffd3b82, 0x4a60b096, 0x3ff11eb8, 0x51eb8526},			/* 1.82702=f(1.07000)*/
-{12, 0,123,__LINE__, 0x3ffdf081, 0x9f873dbf, 0x3ff147ae, 0x147ae14f},			/* 1.87121=f(1.08000)*/
-{12, 0,123,__LINE__, 0x3ffeac68, 0x9d7c22ff, 0x3ff170a3, 0xd70a3d78},			/* 1.91709=f(1.09000)*/
-{12, 0,123,__LINE__, 0x3fff6fa7, 0xeae23a93, 0x3ff19999, 0x999999a1},			/* 1.96476=f(1.10000)*/
-{ 1, 0,123,__LINE__, 0x40001d5d, 0x5f776659, 0x3ff1c28f, 0x5c28f5ca},			/* 2.01433=f(1.11000)*/
-{ 1, 0,123,__LINE__, 0x40008713, 0x8be051ea, 0x3ff1eb85, 0x1eb851f3},			/* 2.06595=f(1.12000)*/
-{ 1, 0,123,__LINE__, 0x4000f53f, 0x76ea55a9, 0x3ff2147a, 0xe147ae1c},			/* 2.11975=f(1.13000)*/
-{ 1, 0,123,__LINE__, 0x40016831, 0x1d167463, 0x3ff23d70, 0xa3d70a45},			/* 2.17587=f(1.14000)*/
-{ 1, 0,123,__LINE__, 0x4001e03f, 0xd68293e3, 0x3ff26666, 0x6666666e},			/* 2.23449=f(1.15000)*/
-{ 1, 0,123,__LINE__, 0x40025dcb, 0x75d83ff1, 0x3ff28f5c, 0x28f5c297},			/* 2.29579=f(1.16000)*/
-{ 1, 0,123,__LINE__, 0x4002e13d, 0x9fc3ce6f, 0x3ff2b851, 0xeb851ec0},			/* 2.35998=f(1.17000)*/
-{ 1, 0,123,__LINE__, 0x40036b0a, 0x697947b9, 0x3ff2e147, 0xae147ae9},			/* 2.42726=f(1.18000)*/
-{ 1, 0,123,__LINE__, 0x4003fbb2, 0xd945e787, 0x3ff30a3d, 0x70a3d712},			/* 2.49790=f(1.19000)*/
-{ 1, 0,123,__LINE__, 0xbe8777a5, 0xc0000000, 0xc01921fb, 0x54442d18},			/* -1.74846e-07=f(-6.28318)*/
-{ 0, 0,123,__LINE__, 0x4193fe4d, 0xa6dc0b8b, 0xc012d97c, 0x7f3321d2},			/* 8.38583e+07=f(-4.71238)*/
-{ 0, 0,123,__LINE__, 0xbe7777a5, 0xc0000000, 0xc00921fb, 0x54442d18},			/* -8.74228e-08=f(-3.14159)*/
-{ 0, 0,123,__LINE__, 0x4175d149, 0x55395d8c, 0xbff921fb, 0x54442d18},			/* 2.28773e+07=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x00000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0xc175d149, 0x55395d8c, 0x3ff921fb, 0x54442d18},			/* -2.28773e+07=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0x3e7777a5, 0xc0000000, 0x400921fb, 0x54442d18},			/* 8.74228e-08=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0xc193fe4d, 0xa6dc0b8b, 0x4012d97c, 0x7f3321d2},			/* -8.38583e+07=f(4.71238)*/
-{ 1, 0,123,__LINE__, 0x40199f0f, 0x27615149, 0xc03e0000, 0x00000000},			/* 6.40533=f(-30.0000)*/
-{ 0, 0,123,__LINE__, 0xbf9a497f, 0x04d53b60, 0xc03c4ccc, 0xcccccccd},			/* -0.02567=f(-28.3000)*/
-{10, 0,123,__LINE__, 0xc0233f66, 0xa749aaa3, 0xc03a9999, 0x9999999a},			/* -9.62383=f(-26.6000)*/
-{10, 0,123,__LINE__, 0x3fce573b, 0x9297a04b, 0xc038e666, 0x66666667},			/* 0.23703=f(-24.9000)*/
-{ 0, 0,123,__LINE__, 0xc005210f, 0x278724c9, 0xc0373333, 0x33333334},			/* -2.64114=f(-23.2000)*/
-{ 0, 0,123,__LINE__, 0x3fe11d9b, 0xecc8f3e1, 0xc0358000, 0x00000001},			/* 0.53486=f(-21.5000)*/
-{12, 0,123,__LINE__, 0xbff66525, 0x1fb50b52, 0xc033cccc, 0xccccccce},			/* -1.39969=f(-19.8000)*/
-{11, 0,123,__LINE__, 0x3fedc8d6, 0xf318ea3e, 0xc0321999, 0x9999999b},			/* 0.93076=f(-18.1000)*/
-{ 0, 0,123,__LINE__, 0xbfea853e, 0xdf877c46, 0xc0306666, 0x66666668},			/* -0.82876=f(-16.4000)*/
-{ 0, 0,123,__LINE__, 0x3ff95c48, 0x49def39c, 0xc02d6666, 0x6666666a},			/* 1.58503=f(-14.7000)*/
-{ 1, 0,123,__LINE__, 0xbfdda223, 0x56cf430d, 0xc02a0000, 0x00000004},			/* -0.46302=f(-13.0000)*/
-{ 1, 0,123,__LINE__, 0x4009764c, 0xead1c266, 0xc0269999, 0x9999999e},			/* 3.18276=f(-11.3000)*/
-{ 0, 0,123,__LINE__, 0xbfc6a92e, 0x6a1e57c7, 0xc0233333, 0x33333338},			/* -0.17703=f(-9.60000)*/
-{ 0, 0,123,__LINE__, 0x4035b70e, 0xa0da4c53, 0xc01f9999, 0x999999a3},			/* 21.7150=f(-7.90000)*/
-{ 1, 0,123,__LINE__, 0x3fb55841, 0x3f74c4ae, 0xc018cccc, 0xccccccd6},			/* 0.08337=f(-6.20000)*/
-{ 0, 0,123,__LINE__, 0xc0128ca0, 0xc0967da8, 0xc0120000, 0x00000009},			/* -4.63733=f(-4.50000)*/
-{ 0, 0,123,__LINE__, 0x3fd6c100, 0x5a9084a9, 0xc0066666, 0x66666678},			/* 0.35552=f(-2.80000)*/
-{12, 0,123,__LINE__, 0xbfff6fa7, 0xeae23a93, 0xbff19999, 0x999999bd},			/* -1.96476=f(-1.10000)*/
-{13, 0,123,__LINE__, 0x3fe5e472, 0xf54ac1cd, 0x3fe33333, 0x333332ec},			/* 0.68413=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0xbff1e84c, 0xb42a7218, 0x40026666, 0x66666654},			/* -1.11921=f(2.30000)*/
-{ 0, 0,123,__LINE__, 0x3ff2866f, 0x908b6cb4, 0x400fffff, 0xffffffee},			/* 1.15782=f(4.00000)*/
-{ 0, 0,123,__LINE__, 0xbfe51c83, 0xd0e60b2d, 0x4016cccc, 0xccccccc4},			/* -0.65973=f(5.70000)*/
-{ 0, 0,123,__LINE__, 0x400064ef, 0x579fabbb, 0x401d9999, 0x99999991},			/* 2.04928=f(7.40000)*/
-{ 0, 0,123,__LINE__, 0xbfd58c7e, 0x92511400, 0x40223333, 0x3333332f},			/* -0.33670=f(9.10000)*/
-{ 0, 0,123,__LINE__, 0x401430f0, 0xbdd4c56f, 0x40259999, 0x99999995},			/* 5.04779=f(10.8000)*/
-{ 0, 0,123,__LINE__, 0xbfb10410, 0x17477fcb, 0x4028ffff, 0xfffffffb},			/* -0.06646=f(12.5000)*/
-{ 1, 0,123,__LINE__, 0xc02fc9df, 0xd67a3cab, 0x402c6666, 0x66666661},			/* -15.8942=f(14.2000)*/
-{10, 0,123,__LINE__, 0x3fc8e328, 0x966c190b, 0x402fcccc, 0xccccccc7},			/* 0.19443=f(15.9000)*/
-{ 0, 0,123,__LINE__, 0xc0080a74, 0xb4824c6f, 0x40319999, 0x99999997},			/* -3.00510=f(17.6000)*/
-{ 1, 0,123,__LINE__, 0x3fdef355, 0xac5c412f, 0x40334ccc, 0xccccccca},			/* 0.48360=f(19.3000)*/
-{ 1, 0,123,__LINE__, 0xbff870a2, 0x2427cd2a, 0x4034ffff, 0xfffffffd},			/* -1.52749=f(21.0000)*/
-{ 0, 0,123,__LINE__, 0x3feb70ec, 0xd329acfd, 0x4036b333, 0x33333330},			/* 0.85753=f(22.7000)*/
-{ 0, 0,123,__LINE__, 0xbfeccbb5, 0xc889fb0f, 0x40386666, 0x66666663},			/* -0.89986=f(24.4000)*/
-{ 0, 0,123,__LINE__, 0x3ff735e5, 0x7ffe01fb, 0x403a1999, 0x99999996},			/* 1.45065=f(26.1000)*/
-{ 0, 0,123,__LINE__, 0xbfe06e07, 0x062e771c, 0x403bcccc, 0xccccccc9},			/* -0.51343=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0x4006407d, 0xa6634ee2, 0x403d7fff, 0xfffffffc},			/* 2.78149=f(29.5000)*/
-0,};
-test_tanf(m)   {run_vector_1(m,tanf_vec,(char *)(tanf),"tanf","ff");   }	
diff --git a/newlib/libm/test/tanh_vec.c b/newlib/libm/test/tanh_vec.c
deleted file mode 100644
index 01ad1c220..000000000
--- a/newlib/libm/test/tanh_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type tanh_vec[] = {
-{64, 0,123,__LINE__, 0xbfeaad4c, 0x6d28dcaf, 0xbff33333, 0x33333333},			/* -0.83365=f(-1.20000)*/
-{64, 0,123,__LINE__, 0xbfea941a, 0x22a3e4a9, 0xbff30a3d, 0x70a3d70a},			/* -0.83057=f(-1.19000)*/
-{64, 0,123,__LINE__, 0xbfea7a7b, 0xcd09aecf, 0xbff2e147, 0xae147ae1},			/* -0.82745=f(-1.18000)*/
-{60, 0,123,__LINE__, 0xbfea6070, 0x07d3d0d8, 0xbff2b851, 0xeb851eb8},			/* -0.82427=f(-1.17000)*/
-{63, 0,123,__LINE__, 0xbfea45f5, 0x6de12a6b, 0xbff28f5c, 0x28f5c28f},			/* -0.82103=f(-1.16000)*/
-{64, 0,123,__LINE__, 0xbfea2b0a, 0x99a1b256, 0xbff26666, 0x66666666},			/* -0.81775=f(-1.15000)*/
-{64, 0,123,__LINE__, 0xbfea0fae, 0x254400cf, 0xbff23d70, 0xa3d70a3d},			/* -0.81441=f(-1.14000)*/
-{64, 0,123,__LINE__, 0xbfe9f3de, 0xaae49d27, 0xbff2147a, 0xe147ae14},			/* -0.81101=f(-1.13000)*/
-{64, 0,123,__LINE__, 0xbfe9d79a, 0xc4bf14e4, 0xbff1eb85, 0x1eb851eb},			/* -0.80756=f(-1.12000)*/
-{64, 0,123,__LINE__, 0xbfe9bae1, 0x0d60e1cc, 0xbff1c28f, 0x5c28f5c2},			/* -0.80406=f(-1.11000)*/
-{64, 0,123,__LINE__, 0xbfe99db0, 0x1fde2404, 0xbff19999, 0x99999999},			/* -0.80049=f(-1.10000)*/
-{63, 0,123,__LINE__, 0xbfe98006, 0x98083507, 0xbff170a3, 0xd70a3d70},			/* -0.79687=f(-1.09000)*/
-{64, 0,123,__LINE__, 0xbfe961e3, 0x12a61778, 0xbff147ae, 0x147ae147},			/* -0.79319=f(-1.08000)*/
-{64, 0,123,__LINE__, 0xbfe94344, 0x2daec7a4, 0xbff11eb8, 0x51eb851e},			/* -0.78946=f(-1.07000)*/
-{64, 0,123,__LINE__, 0xbfe92428, 0x88856fa2, 0xbff0f5c2, 0x8f5c28f5},			/* -0.78566=f(-1.06000)*/
-{64, 0,123,__LINE__, 0xbfe9048e, 0xc437818f, 0xbff0cccc, 0xcccccccc},			/* -0.78180=f(-1.05000)*/
-{64, 0,123,__LINE__, 0xbfe8e475, 0x83bcb9ca, 0xbff0a3d7, 0x0a3d70a3},			/* -0.77788=f(-1.04000)*/
-{64, 0,123,__LINE__, 0xbfe8c3db, 0x6c390a32, 0xbff07ae1, 0x47ae147a},			/* -0.77390=f(-1.03000)*/
-{64, 0,123,__LINE__, 0xbfe8a2bf, 0x25406ee4, 0xbff051eb, 0x851eb851},			/* -0.76986=f(-1.02000)*/
-{63, 0,123,__LINE__, 0xbfe8811f, 0x591cac08, 0xbff028f5, 0xc28f5c28},			/* -0.76576=f(-1.01000)*/
-{64, 0,123,__LINE__, 0xbfe85efa, 0xb514f394, 0xbfefffff, 0xfffffffe},			/* -0.76159=f(-0.01000)*/
-{64, 0,123,__LINE__, 0xbfe83c4f, 0xe9b770e0, 0xbfefae14, 0x7ae147ac},			/* -0.75736=f(-0.99000)*/
-{63, 0,123,__LINE__, 0xbfe8191d, 0xab24b746, 0xbfef5c28, 0xf5c28f5a},			/* -0.75306=f(-0.98000)*/
-{64, 0,123,__LINE__, 0xbfe7f562, 0xb15d0fce, 0xbfef0a3d, 0x70a3d708},			/* -0.74870=f(-0.97000)*/
-{64, 0,123,__LINE__, 0xbfe7d11d, 0xb88fa124, 0xbfeeb851, 0xeb851eb6},			/* -0.74427=f(-0.96000)*/
-{64, 0,123,__LINE__, 0xbfe7ac4d, 0x816b6c0b, 0xbfee6666, 0x66666664},			/* -0.73978=f(-0.95000)*/
-{63, 0,123,__LINE__, 0xbfe786f0, 0xd1721548, 0xbfee147a, 0xe147ae12},			/* -0.73522=f(-0.94000)*/
-{64, 0,123,__LINE__, 0xbfe76106, 0x734c7526, 0xbfedc28f, 0x5c28f5c0},			/* -0.73059=f(-0.93000)*/
-{64, 0,123,__LINE__, 0xbfe73a8d, 0x3720e34a, 0xbfed70a3, 0xd70a3d6e},			/* -0.72589=f(-0.92000)*/
-{64, 0,123,__LINE__, 0xbfe71383, 0xf2eb34bd, 0xbfed1eb8, 0x51eb851c},			/* -0.72113=f(-0.91000)*/
-{64, 0,123,__LINE__, 0xbfe6ebe9, 0x82d6605b, 0xbfeccccc, 0xccccccca},			/* -0.71629=f(-0.90000)*/
-{61, 0,123,__LINE__, 0xbfe6c3bc, 0xc997bd23, 0xbfec7ae1, 0x47ae1478},			/* -0.71139=f(-0.89000)*/
-{64, 0,123,__LINE__, 0xbfe69afc, 0xb0cbcc26, 0xbfec28f5, 0xc28f5c26},			/* -0.70641=f(-0.88000)*/
-{64, 0,123,__LINE__, 0xbfe671a8, 0x29547ec2, 0xbfebd70a, 0x3d70a3d4},			/* -0.70137=f(-0.87000)*/
-{62, 0,123,__LINE__, 0xbfe647be, 0x2bb8e865, 0xbfeb851e, 0xb851eb82},			/* -0.69625=f(-0.86000)*/
-{64, 0,123,__LINE__, 0xbfe61d3d, 0xb88649b0, 0xbfeb3333, 0x33333330},			/* -0.69106=f(-0.85000)*/
-{63, 0,123,__LINE__, 0xbfe5f225, 0xd8b26165, 0xbfeae147, 0xae147ade},			/* -0.68580=f(-0.84000)*/
-{63, 0,123,__LINE__, 0xbfe5c675, 0x9dfeee35, 0xbfea8f5c, 0x28f5c28c},			/* -0.68047=f(-0.83000)*/
-{64, 0,123,__LINE__, 0xbfe59a2c, 0x235e4ad2, 0xbfea3d70, 0xa3d70a3a},			/* -0.67506=f(-0.82000)*/
-{62, 0,123,__LINE__, 0xbfe56d48, 0x8d590c72, 0xbfe9eb85, 0x1eb851e8},			/* -0.66959=f(-0.81000)*/
-{63, 0,123,__LINE__, 0xbfe53fca, 0x0a748a3e, 0xbfe99999, 0x99999996},			/* -0.66403=f(-0.80000)*/
-{64, 0,123,__LINE__, 0xbfe511af, 0xd39a32b6, 0xbfe947ae, 0x147ae144},			/* -0.65840=f(-0.79000)*/
-{64, 0,123,__LINE__, 0xbfe4e2f9, 0x2c7f9282, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.65270=f(-0.78000)*/
-{62, 0,123,__LINE__, 0xbfe4b3a5, 0x640eeeb6, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.64692=f(-0.77000)*/
-{62, 0,123,__LINE__, 0xbfe483b3, 0xd4d052ee, 0xbfe851eb, 0x851eb84e},			/* -0.64107=f(-0.76000)*/
-{64, 0,123,__LINE__, 0xbfe45323, 0xe552f226, 0xbfe7ffff, 0xfffffffc},			/* -0.63514=f(-0.75000)*/
-{64, 0,123,__LINE__, 0xbfe421f5, 0x0896b7b0, 0xbfe7ae14, 0x7ae147aa},			/* -0.62914=f(-0.74000)*/
-{64, 0,123,__LINE__, 0xbfe3f026, 0xbe75e420, 0xbfe75c28, 0xf5c28f58},			/* -0.62306=f(-0.73000)*/
-{63, 0,123,__LINE__, 0xbfe3bdb8, 0x940e909b, 0xbfe70a3d, 0x70a3d706},			/* -0.61690=f(-0.72000)*/
-{64, 0,123,__LINE__, 0xbfe38aaa, 0x242bf149, 0xbfe6b851, 0xeb851eb4},			/* -0.61067=f(-0.71000)*/
-{64, 0,123,__LINE__, 0xbfe356fb, 0x17af2e8e, 0xbfe66666, 0x66666662},			/* -0.60436=f(-0.70000)*/
-{63, 0,123,__LINE__, 0xbfe322ab, 0x25f7aadc, 0xbfe6147a, 0xe147ae10},			/* -0.59798=f(-0.69000)*/
-{63, 0,123,__LINE__, 0xbfe2edba, 0x154a89f9, 0xbfe5c28f, 0x5c28f5be},			/* -0.59151=f(-0.68000)*/
-{64, 0,123,__LINE__, 0xbfe2b827, 0xbb394cea, 0xbfe570a3, 0xd70a3d6c},			/* -0.58497=f(-0.67000)*/
-{64, 0,123,__LINE__, 0xbfe281f3, 0xfd0754b6, 0xbfe51eb8, 0x51eb851a},			/* -0.57836=f(-0.66000)*/
-{62, 0,123,__LINE__, 0xbfe24b1e, 0xd00e1cb8, 0xbfe4cccc, 0xccccccc8},			/* -0.57166=f(-0.65000)*/
-{64, 0,123,__LINE__, 0xbfe213a8, 0x3a1ffc62, 0xbfe47ae1, 0x47ae1476},			/* -0.56489=f(-0.64000)*/
-{63, 0,123,__LINE__, 0xbfe1db90, 0x51e93ee4, 0xbfe428f5, 0xc28f5c24},			/* -0.55805=f(-0.63000)*/
-{62, 0,123,__LINE__, 0xbfe1a2d7, 0x3f4f5e90, 0xbfe3d70a, 0x3d70a3d2},			/* -0.55112=f(-0.62000)*/
-{61, 0,123,__LINE__, 0xbfe1697d, 0x3bce3092, 0xbfe3851e, 0xb851eb80},			/* -0.54412=f(-0.61000)*/
-{63, 0,123,__LINE__, 0xbfe12f82, 0x92d2ccf8, 0xbfe33333, 0x3333332e},			/* -0.53704=f(-0.60000)*/
-{62, 0,123,__LINE__, 0xbfe0f4e7, 0xa213fe44, 0xbfe2e147, 0xae147adc},			/* -0.52989=f(-0.59000)*/
-{64, 0,123,__LINE__, 0xbfe0b9ac, 0xd9e8032a, 0xbfe28f5c, 0x28f5c28a},			/* -0.52266=f(-0.58000)*/
-{64, 0,123,__LINE__, 0xbfe07dd2, 0xbd976c80, 0xbfe23d70, 0xa3d70a38},			/* -0.51535=f(-0.57000)*/
-{57, 0,123,__LINE__, 0xbfe04159, 0xe3ace13f, 0xbfe1eb85, 0x1eb851e6},			/* -0.50797=f(-0.56000)*/
-{54, 0,123,__LINE__, 0xbfe00442, 0xf64191fe, 0xbfe19999, 0x99999994},			/* -0.50052=f(-0.55000)*/
-{64, 0,123,__LINE__, 0xbfdf8d1d, 0x668c4a9c, 0xbfe147ae, 0x147ae142},			/* -0.49298=f(-0.54000)*/
-{64, 0,123,__LINE__, 0xbfdf107b, 0xd98fcce8, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.48538=f(-0.53000)*/
-{64, 0,123,__LINE__, 0xbfde92a3, 0x1263fffb, 0xbfe0a3d7, 0x0a3d709e},			/* -0.47770=f(-0.52000)*/
-{64, 0,123,__LINE__, 0xbfde1395, 0x0715184e, 0xbfe051eb, 0x851eb84c},			/* -0.46994=f(-0.51000)*/
-{64, 0,123,__LINE__, 0xbfdd9353, 0xd7568aea, 0xbfdfffff, 0xfffffff4},			/* -0.46211=f(-0.50000)*/
-{64, 0,123,__LINE__, 0xbfdd11e1, 0xcceb44fe, 0xbfdf5c28, 0xf5c28f50},			/* -0.45421=f(-0.49000)*/
-{64, 0,123,__LINE__, 0xbfdc8f41, 0x5c04518a, 0xbfdeb851, 0xeb851eac},			/* -0.44624=f(-0.48000)*/
-{64, 0,123,__LINE__, 0xbfdc0b75, 0x239586a4, 0xbfde147a, 0xe147ae08},			/* -0.43819=f(-0.47000)*/
-{64, 0,123,__LINE__, 0xbfdb867f, 0xed9fd638, 0xbfdd70a3, 0xd70a3d64},			/* -0.43008=f(-0.46000)*/
-{64, 0,123,__LINE__, 0xbfdb0064, 0xaf70e0b0, 0xbfdccccc, 0xccccccc0},			/* -0.42189=f(-0.45000)*/
-{64, 0,123,__LINE__, 0xbfda7926, 0x89d76b00, 0xbfdc28f5, 0xc28f5c1c},			/* -0.41364=f(-0.44000)*/
-{64, 0,123,__LINE__, 0xbfd9f0c8, 0xc94c5cc2, 0xbfdb851e, 0xb851eb78},			/* -0.40532=f(-0.43000)*/
-{64, 0,123,__LINE__, 0xbfd9674e, 0xe60feeea, 0xbfdae147, 0xae147ad4},			/* -0.39693=f(-0.42000)*/
-{64, 0,123,__LINE__, 0xbfd8dcbc, 0x843ab76e, 0xbfda3d70, 0xa3d70a30},			/* -0.38847=f(-0.41000)*/
-{64, 0,123,__LINE__, 0xbfd85115, 0x73c242ca, 0xbfd99999, 0x9999998c},			/* -0.37994=f(-0.40000)*/
-{64, 0,123,__LINE__, 0xbfd7c45d, 0xb070f0ee, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.37136=f(-0.39000)*/
-{64, 0,123,__LINE__, 0xbfd73699, 0x61d0d031, 0xbfd851eb, 0x851eb844},			/* -0.36270=f(-0.38000)*/
-{64, 0,123,__LINE__, 0xbfd6a7cc, 0xdb093664, 0xbfd7ae14, 0x7ae147a0},			/* -0.35399=f(-0.37000)*/
-{64, 0,123,__LINE__, 0xbfd617fc, 0x9aaeddca, 0xbfd70a3d, 0x70a3d6fc},			/* -0.34521=f(-0.36000)*/
-{64, 0,123,__LINE__, 0xbfd5872d, 0x4a8651c9, 0xbfd66666, 0x66666658},			/* -0.33637=f(-0.35000)*/
-{64, 0,123,__LINE__, 0xbfd4f563, 0xbf387d9c, 0xbfd5c28f, 0x5c28f5b4},			/* -0.32747=f(-0.34000)*/
-{64, 0,123,__LINE__, 0xbfd462a4, 0xf7f935d1, 0xbfd51eb8, 0x51eb8510},			/* -0.31852=f(-0.33000)*/
-{64, 0,123,__LINE__, 0xbfd3cef6, 0x1e1f9c83, 0xbfd47ae1, 0x47ae146c},			/* -0.30950=f(-0.32000)*/
-{64, 0,123,__LINE__, 0xbfd33a5c, 0x84b04735, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30043=f(-0.31000)*/
-{64, 0,123,__LINE__, 0xbfd2a4dd, 0xa7d914ec, 0xbfd33333, 0x33333324},			/* -0.29131=f(-0.30000)*/
-{64, 0,123,__LINE__, 0xbfd20e7f, 0x2c5eaa96, 0xbfd28f5c, 0x28f5c280},			/* -0.28213=f(-0.29000)*/
-{64, 0,123,__LINE__, 0xbfd17746, 0xdefb93d0, 0xbfd1eb85, 0x1eb851dc},			/* -0.27290=f(-0.28000)*/
-{64, 0,123,__LINE__, 0xbfd0df3a, 0xb3b10e2e, 0xbfd147ae, 0x147ae138},			/* -0.26362=f(-0.27000)*/
-{64, 0,123,__LINE__, 0xbfd04660, 0xc5098d45, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25429=f(-0.26000)*/
-{64, 0,123,__LINE__, 0xbfcf597e, 0xa69a1c68, 0xbfcfffff, 0xffffffe0},			/* -0.24491=f(-0.25000)*/
-{64, 0,123,__LINE__, 0xbfce24b9, 0x874eb37a, 0xbfceb851, 0xeb851e98},			/* -0.23549=f(-0.24000)*/
-{64, 0,123,__LINE__, 0xbfccee7f, 0x3e80b94e, 0xbfcd70a3, 0xd70a3d50},			/* -0.22602=f(-0.23000)*/
-{64, 0,123,__LINE__, 0xbfcbb6dd, 0x248d8d37, 0xbfcc28f5, 0xc28f5c08},			/* -0.21651=f(-0.22000)*/
-{64, 0,123,__LINE__, 0xbfca7de0, 0xd5da50b4, 0xbfcae147, 0xae147ac0},			/* -0.20696=f(-0.21000)*/
-{64, 0,123,__LINE__, 0xbfc94398, 0x30b3a570, 0xbfc99999, 0x99999978},			/* -0.19737=f(-0.20000)*/
-{64, 0,123,__LINE__, 0xbfc80811, 0x531380b4, 0xbfc851eb, 0x851eb830},			/* -0.18774=f(-0.19000)*/
-{64, 0,123,__LINE__, 0xbfc6cb5a, 0x984db955, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17808=f(-0.18000)*/
-{64, 0,123,__LINE__, 0xbfc58d82, 0x96a4059b, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16838=f(-0.17000)*/
-{64, 0,123,__LINE__, 0xbfc44e98, 0x1cc22f53, 0xbfc47ae1, 0x47ae1458},			/* -0.15864=f(-0.16000)*/
-{64, 0,123,__LINE__, 0xbfc30eaa, 0x2f235432, 0xbfc33333, 0x33333310},			/* -0.14888=f(-0.15000)*/
-{64, 0,123,__LINE__, 0xbfc1cdc8, 0x0561186b, 0xbfc1eb85, 0x1eb851c8},			/* -0.13909=f(-0.14000)*/
-{64, 0,123,__LINE__, 0xbfc08c01, 0x076dc0aa, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12927=f(-0.13000)*/
-{64, 0,123,__LINE__, 0xbfbe92c9, 0x95746e8e, 0xbfbeb851, 0xeb851e71},			/* -0.11942=f(-0.12000)*/
-{64, 0,123,__LINE__, 0xbfbc0c06, 0x1e921d60, 0xbfbc28f5, 0xc28f5be2},			/* -0.10955=f(-0.11000)*/
-{64, 0,123,__LINE__, 0xbfb983d7, 0x795f40f4, 0xbfb99999, 0x99999953},			/* -0.09966=f(-0.00100)*/
-{64, 0,123,__LINE__, 0xbfb6fa5d, 0xbe0ceab2, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08975=f(-0.09000)*/
-{64, 0,123,__LINE__, 0xbfb46fb9, 0x47945c79, 0xbfb47ae1, 0x47ae1435},			/* -0.07982=f(-0.08000)*/
-{64, 0,123,__LINE__, 0xbfb1e40a, 0xad5c640a, 0xbfb1eb85, 0x1eb851a6},			/* -0.06988=f(-0.07000)*/
-{64, 0,123,__LINE__, 0xbfaeaee5, 0x7989b65b, 0xbfaeb851, 0xeb851e2d},			/* -0.05992=f(-0.06000)*/
-{64, 0,123,__LINE__, 0xbfa99424, 0xe535f66d, 0xbfa99999, 0x9999990e},			/* -0.04995=f(-0.05000)*/
-{64, 0,123,__LINE__, 0xbfa47815, 0xe8f28682, 0xbfa47ae1, 0x47ae13ef},			/* -0.03997=f(-0.04000)*/
-{64, 0,123,__LINE__, 0xbf9eb5f6, 0x2856ff57, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{64, 0,123,__LINE__, 0xbf947a2e, 0x5a063e00, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{64, 0,123,__LINE__, 0xbf847ab4, 0x8ae4572c, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{64, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0x3f847ab4, 0x8ae45b90, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{64, 0,123,__LINE__, 0x3f947a2e, 0x5a064032, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{64, 0,123,__LINE__, 0x3f9eb5f6, 0x28570189, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{64, 0,123,__LINE__, 0x3fa47815, 0xe8f2879b, 0x3fa47ae1, 0x47ae1508},			/* 0.03997=f(0.04000)*/
-{64, 0,123,__LINE__, 0x3fa99424, 0xe535f785, 0x3fa99999, 0x99999a27},			/* 0.04995=f(0.05000)*/
-{64, 0,123,__LINE__, 0x3faeaee5, 0x7989b773, 0x3faeb851, 0xeb851f46},			/* 0.05992=f(0.06000)*/
-{64, 0,123,__LINE__, 0x3fb1e40a, 0xad5c6495, 0x3fb1eb85, 0x1eb85232},			/* 0.06988=f(0.07000)*/
-{64, 0,123,__LINE__, 0x3fb46fb9, 0x47945d05, 0x3fb47ae1, 0x47ae14c1},			/* 0.07982=f(0.08000)*/
-{64, 0,123,__LINE__, 0x3fb6fa5d, 0xbe0ceb3c, 0x3fb70a3d, 0x70a3d750},			/* 0.08975=f(0.09000)*/
-{64, 0,123,__LINE__, 0x3fb983d7, 0x795f417f, 0x3fb99999, 0x999999df},			/* 0.09966=f(0.10000)*/
-{64, 0,123,__LINE__, 0x3fbc0c06, 0x1e921deb, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10955=f(0.11000)*/
-{64, 0,123,__LINE__, 0x3fbe92c9, 0x95746f18, 0x3fbeb851, 0xeb851efd},			/* 0.11942=f(0.12000)*/
-{64, 0,123,__LINE__, 0x3fc08c01, 0x076dc0ee, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12927=f(0.13000)*/
-{64, 0,123,__LINE__, 0x3fc1cdc8, 0x056118b0, 0x3fc1eb85, 0x1eb8520e},			/* 0.13909=f(0.14000)*/
-{64, 0,123,__LINE__, 0x3fc30eaa, 0x2f235477, 0x3fc33333, 0x33333356},			/* 0.14888=f(0.15000)*/
-{64, 0,123,__LINE__, 0x3fc44e98, 0x1cc22f98, 0x3fc47ae1, 0x47ae149e},			/* 0.15864=f(0.16000)*/
-{64, 0,123,__LINE__, 0x3fc58d82, 0x96a405df, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16838=f(0.17000)*/
-{64, 0,123,__LINE__, 0x3fc6cb5a, 0x984db998, 0x3fc70a3d, 0x70a3d72e},			/* 0.17808=f(0.18000)*/
-{64, 0,123,__LINE__, 0x3fc80811, 0x531380f8, 0x3fc851eb, 0x851eb876},			/* 0.18774=f(0.19000)*/
-{64, 0,123,__LINE__, 0x3fc94398, 0x30b3a5b3, 0x3fc99999, 0x999999be},			/* 0.19737=f(0.20000)*/
-{64, 0,123,__LINE__, 0x3fca7de0, 0xd5da50f7, 0x3fcae147, 0xae147b06},			/* 0.20696=f(0.21000)*/
-{64, 0,123,__LINE__, 0x3fcbb6dd, 0x248d8d7a, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21651=f(0.22000)*/
-{64, 0,123,__LINE__, 0x3fccee7f, 0x3e80b991, 0x3fcd70a3, 0xd70a3d96},			/* 0.22602=f(0.23000)*/
-{64, 0,123,__LINE__, 0x3fce24b9, 0x874eb3bc, 0x3fceb851, 0xeb851ede},			/* 0.23549=f(0.24000)*/
-{64, 0,123,__LINE__, 0x3fcf597e, 0xa69a1caa, 0x3fd00000, 0x00000013},			/* 0.24491=f(0.25000)*/
-{64, 0,123,__LINE__, 0x3fd04660, 0xc5098d66, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25429=f(0.26000)*/
-{64, 0,123,__LINE__, 0x3fd0df3a, 0xb3b10e4e, 0x3fd147ae, 0x147ae15b},			/* 0.26362=f(0.27000)*/
-{64, 0,123,__LINE__, 0x3fd17746, 0xdefb93f0, 0x3fd1eb85, 0x1eb851ff},			/* 0.27290=f(0.28000)*/
-{64, 0,123,__LINE__, 0x3fd20e7f, 0x2c5eaab6, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28213=f(0.29000)*/
-{64, 0,123,__LINE__, 0x3fd2a4dd, 0xa7d9150c, 0x3fd33333, 0x33333347},			/* 0.29131=f(0.30000)*/
-{64, 0,123,__LINE__, 0x3fd33a5c, 0x84b04755, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30043=f(0.31000)*/
-{64, 0,123,__LINE__, 0x3fd3cef6, 0x1e1f9ca2, 0x3fd47ae1, 0x47ae148f},			/* 0.30950=f(0.32000)*/
-{64, 0,123,__LINE__, 0x3fd462a4, 0xf7f935f1, 0x3fd51eb8, 0x51eb8533},			/* 0.31852=f(0.33000)*/
-{64, 0,123,__LINE__, 0x3fd4f563, 0xbf387dbb, 0x3fd5c28f, 0x5c28f5d7},			/* 0.32747=f(0.34000)*/
-{64, 0,123,__LINE__, 0x3fd5872d, 0x4a8651e8, 0x3fd66666, 0x6666667b},			/* 0.33637=f(0.35000)*/
-{64, 0,123,__LINE__, 0x3fd617fc, 0x9aaedde9, 0x3fd70a3d, 0x70a3d71f},			/* 0.34521=f(0.36000)*/
-{64, 0,123,__LINE__, 0x3fd6a7cc, 0xdb093683, 0x3fd7ae14, 0x7ae147c3},			/* 0.35399=f(0.37000)*/
-{64, 0,123,__LINE__, 0x3fd73699, 0x61d0d04f, 0x3fd851eb, 0x851eb867},			/* 0.36270=f(0.38000)*/
-{64, 0,123,__LINE__, 0x3fd7c45d, 0xb070f10c, 0x3fd8f5c2, 0x8f5c290b},			/* 0.37136=f(0.39000)*/
-{64, 0,123,__LINE__, 0x3fd85115, 0x73c242e8, 0x3fd99999, 0x999999af},			/* 0.37994=f(0.40000)*/
-{64, 0,123,__LINE__, 0x3fd8dcbc, 0x843ab78b, 0x3fda3d70, 0xa3d70a53},			/* 0.38847=f(0.41000)*/
-{64, 0,123,__LINE__, 0x3fd9674e, 0xe60fef07, 0x3fdae147, 0xae147af7},			/* 0.39693=f(0.42000)*/
-{64, 0,123,__LINE__, 0x3fd9f0c8, 0xc94c5cdf, 0x3fdb851e, 0xb851eb9b},			/* 0.40532=f(0.43000)*/
-{64, 0,123,__LINE__, 0x3fda7926, 0x89d76b1d, 0x3fdc28f5, 0xc28f5c3f},			/* 0.41364=f(0.44000)*/
-{64, 0,123,__LINE__, 0x3fdb0064, 0xaf70e0cd, 0x3fdccccc, 0xcccccce3},			/* 0.42189=f(0.45000)*/
-{64, 0,123,__LINE__, 0x3fdb867f, 0xed9fd654, 0x3fdd70a3, 0xd70a3d87},			/* 0.43008=f(0.46000)*/
-{64, 0,123,__LINE__, 0x3fdc0b75, 0x239586c0, 0x3fde147a, 0xe147ae2b},			/* 0.43819=f(0.47000)*/
-{64, 0,123,__LINE__, 0x3fdc8f41, 0x5c0451a6, 0x3fdeb851, 0xeb851ecf},			/* 0.44624=f(0.48000)*/
-{64, 0,123,__LINE__, 0x3fdd11e1, 0xcceb451a, 0x3fdf5c28, 0xf5c28f73},			/* 0.45421=f(0.49000)*/
-{64, 0,123,__LINE__, 0x3fdd9353, 0xd7568b05, 0x3fe00000, 0x0000000b},			/* 0.46211=f(0.50000)*/
-{64, 0,123,__LINE__, 0x3fde1395, 0x07151869, 0x3fe051eb, 0x851eb85d},			/* 0.46994=f(0.51000)*/
-{64, 0,123,__LINE__, 0x3fde92a3, 0x12640015, 0x3fe0a3d7, 0x0a3d70af},			/* 0.47770=f(0.52000)*/
-{64, 0,123,__LINE__, 0x3fdf107b, 0xd98fcd02, 0x3fe0f5c2, 0x8f5c2901},			/* 0.48538=f(0.53000)*/
-{64, 0,123,__LINE__, 0x3fdf8d1d, 0x668c4ab6, 0x3fe147ae, 0x147ae153},			/* 0.49298=f(0.54000)*/
-{64, 0,123,__LINE__, 0x3fe00442, 0xf641920c, 0x3fe19999, 0x999999a5},			/* 0.50052=f(0.55000)*/
-{64, 0,123,__LINE__, 0x3fe04159, 0xe3ace14c, 0x3fe1eb85, 0x1eb851f7},			/* 0.50797=f(0.56000)*/
-{64, 0,123,__LINE__, 0x3fe07dd2, 0xbd976c8c, 0x3fe23d70, 0xa3d70a49},			/* 0.51535=f(0.57000)*/
-{64, 0,123,__LINE__, 0x3fe0b9ac, 0xd9e80336, 0x3fe28f5c, 0x28f5c29b},			/* 0.52266=f(0.58000)*/
-{62, 0,123,__LINE__, 0x3fe0f4e7, 0xa213fe51, 0x3fe2e147, 0xae147aed},			/* 0.52989=f(0.59000)*/
-{64, 0,123,__LINE__, 0x3fe12f82, 0x92d2cd04, 0x3fe33333, 0x3333333f},			/* 0.53704=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fe1697d, 0x3bce30a0, 0x3fe3851e, 0xb851eb91},			/* 0.54412=f(0.61000)*/
-{64, 0,123,__LINE__, 0x3fe1a2d7, 0x3f4f5e9e, 0x3fe3d70a, 0x3d70a3e3},			/* 0.55112=f(0.62000)*/
-{64, 0,123,__LINE__, 0x3fe1db90, 0x51e93ef0, 0x3fe428f5, 0xc28f5c35},			/* 0.55805=f(0.63000)*/
-{62, 0,123,__LINE__, 0x3fe213a8, 0x3a1ffc6d, 0x3fe47ae1, 0x47ae1487},			/* 0.56489=f(0.64000)*/
-{64, 0,123,__LINE__, 0x3fe24b1e, 0xd00e1cc4, 0x3fe4cccc, 0xccccccd9},			/* 0.57166=f(0.65000)*/
-{64, 0,123,__LINE__, 0x3fe281f3, 0xfd0754c1, 0x3fe51eb8, 0x51eb852b},			/* 0.57836=f(0.66000)*/
-{62, 0,123,__LINE__, 0x3fe2b827, 0xbb394cf6, 0x3fe570a3, 0xd70a3d7d},			/* 0.58497=f(0.67000)*/
-{64, 0,123,__LINE__, 0x3fe2edba, 0x154a8a04, 0x3fe5c28f, 0x5c28f5cf},			/* 0.59151=f(0.68000)*/
-{64, 0,123,__LINE__, 0x3fe322ab, 0x25f7aae8, 0x3fe6147a, 0xe147ae21},			/* 0.59798=f(0.69000)*/
-{64, 0,123,__LINE__, 0x3fe356fb, 0x17af2e99, 0x3fe66666, 0x66666673},			/* 0.60436=f(0.70000)*/
-{64, 0,123,__LINE__, 0x3fe38aaa, 0x242bf154, 0x3fe6b851, 0xeb851ec5},			/* 0.61067=f(0.71000)*/
-{63, 0,123,__LINE__, 0x3fe3bdb8, 0x940e90a5, 0x3fe70a3d, 0x70a3d717},			/* 0.61690=f(0.72000)*/
-{64, 0,123,__LINE__, 0x3fe3f026, 0xbe75e42a, 0x3fe75c28, 0xf5c28f69},			/* 0.62306=f(0.73000)*/
-{64, 0,123,__LINE__, 0x3fe421f5, 0x0896b7ba, 0x3fe7ae14, 0x7ae147bb},			/* 0.62914=f(0.74000)*/
-{64, 0,123,__LINE__, 0x3fe45323, 0xe552f230, 0x3fe80000, 0x0000000d},			/* 0.63514=f(0.75000)*/
-{60, 0,123,__LINE__, 0x3fe483b3, 0xd4d052f8, 0x3fe851eb, 0x851eb85f},			/* 0.64107=f(0.76000)*/
-{57, 0,123,__LINE__, 0x3fe4b3a5, 0x640eeec0, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.64692=f(0.77000)*/
-{64, 0,123,__LINE__, 0x3fe4e2f9, 0x2c7f928c, 0x3fe8f5c2, 0x8f5c2903},			/* 0.65270=f(0.78000)*/
-{64, 0,123,__LINE__, 0x3fe511af, 0xd39a32c0, 0x3fe947ae, 0x147ae155},			/* 0.65840=f(0.79000)*/
-{64, 0,123,__LINE__, 0x3fe53fca, 0x0a748a48, 0x3fe99999, 0x999999a7},			/* 0.66403=f(0.80000)*/
-{64, 0,123,__LINE__, 0x3fe56d48, 0x8d590c7a, 0x3fe9eb85, 0x1eb851f9},			/* 0.66959=f(0.81000)*/
-{64, 0,123,__LINE__, 0x3fe59a2c, 0x235e4ada, 0x3fea3d70, 0xa3d70a4b},			/* 0.67506=f(0.82000)*/
-{64, 0,123,__LINE__, 0x3fe5c675, 0x9dfeee3e, 0x3fea8f5c, 0x28f5c29d},			/* 0.68047=f(0.83000)*/
-{64, 0,123,__LINE__, 0x3fe5f225, 0xd8b2616e, 0x3feae147, 0xae147aef},			/* 0.68580=f(0.84000)*/
-{60, 0,123,__LINE__, 0x3fe61d3d, 0xb88649b7, 0x3feb3333, 0x33333341},			/* 0.69106=f(0.85000)*/
-{64, 0,123,__LINE__, 0x3fe647be, 0x2bb8e86e, 0x3feb851e, 0xb851eb93},			/* 0.69625=f(0.86000)*/
-{64, 0,123,__LINE__, 0x3fe671a8, 0x29547eca, 0x3febd70a, 0x3d70a3e5},			/* 0.70137=f(0.87000)*/
-{64, 0,123,__LINE__, 0x3fe69afc, 0xb0cbcc2e, 0x3fec28f5, 0xc28f5c37},			/* 0.70641=f(0.88000)*/
-{61, 0,123,__LINE__, 0x3fe6c3bc, 0xc997bd2b, 0x3fec7ae1, 0x47ae1489},			/* 0.71139=f(0.89000)*/
-{64, 0,123,__LINE__, 0x3fe6ebe9, 0x82d66063, 0x3feccccc, 0xccccccdb},			/* 0.71629=f(0.90000)*/
-{64, 0,123,__LINE__, 0x3fe71383, 0xf2eb34c6, 0x3fed1eb8, 0x51eb852d},			/* 0.72113=f(0.91000)*/
-{64, 0,123,__LINE__, 0x3fe73a8d, 0x3720e353, 0x3fed70a3, 0xd70a3d7f},			/* 0.72589=f(0.92000)*/
-{62, 0,123,__LINE__, 0x3fe76106, 0x734c752e, 0x3fedc28f, 0x5c28f5d1},			/* 0.73059=f(0.93000)*/
-{64, 0,123,__LINE__, 0x3fe786f0, 0xd1721552, 0x3fee147a, 0xe147ae23},			/* 0.73522=f(0.94000)*/
-{64, 0,123,__LINE__, 0x3fe7ac4d, 0x816b6c14, 0x3fee6666, 0x66666675},			/* 0.73978=f(0.95000)*/
-{64, 0,123,__LINE__, 0x3fe7d11d, 0xb88fa12c, 0x3feeb851, 0xeb851ec7},			/* 0.74427=f(0.96000)*/
-{64, 0,123,__LINE__, 0x3fe7f562, 0xb15d0fd6, 0x3fef0a3d, 0x70a3d719},			/* 0.74870=f(0.97000)*/
-{64, 0,123,__LINE__, 0x3fe8191d, 0xab24b74e, 0x3fef5c28, 0xf5c28f6b},			/* 0.75306=f(0.98000)*/
-{64, 0,123,__LINE__, 0x3fe83c4f, 0xe9b770e8, 0x3fefae14, 0x7ae147bd},			/* 0.75736=f(0.99000)*/
-{64, 0,123,__LINE__, 0x3fe85efa, 0xb514f39a, 0x3ff00000, 0x00000007},			/* 0.76159=f(1.00000)*/
-{59, 0,123,__LINE__, 0x3fe8811f, 0x591cac0f, 0x3ff028f5, 0xc28f5c30},			/* 0.76576=f(1.01000)*/
-{64, 0,123,__LINE__, 0x3fe8a2bf, 0x25406eea, 0x3ff051eb, 0x851eb859},			/* 0.76986=f(1.02000)*/
-{63, 0,123,__LINE__, 0x3fe8c3db, 0x6c390a38, 0x3ff07ae1, 0x47ae1482},			/* 0.77390=f(1.03000)*/
-{64, 0,123,__LINE__, 0x3fe8e475, 0x83bcb9d0, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.77788=f(1.04000)*/
-{64, 0,123,__LINE__, 0x3fe9048e, 0xc4378195, 0x3ff0cccc, 0xccccccd4},			/* 0.78180=f(1.05000)*/
-{64, 0,123,__LINE__, 0x3fe92428, 0x88856fa8, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.78566=f(1.06000)*/
-{64, 0,123,__LINE__, 0x3fe94344, 0x2daec7aa, 0x3ff11eb8, 0x51eb8526},			/* 0.78946=f(1.07000)*/
-{64, 0,123,__LINE__, 0x3fe961e3, 0x12a6177e, 0x3ff147ae, 0x147ae14f},			/* 0.79319=f(1.08000)*/
-{64, 0,123,__LINE__, 0x3fe98006, 0x9808350c, 0x3ff170a3, 0xd70a3d78},			/* 0.79687=f(1.09000)*/
-{64, 0,123,__LINE__, 0x3fe99db0, 0x1fde240a, 0x3ff19999, 0x999999a1},			/* 0.80049=f(1.10000)*/
-{62, 0,123,__LINE__, 0x3fe9bae1, 0x0d60e1d2, 0x3ff1c28f, 0x5c28f5ca},			/* 0.80406=f(1.11000)*/
-{63, 0,123,__LINE__, 0x3fe9d79a, 0xc4bf14eb, 0x3ff1eb85, 0x1eb851f3},			/* 0.80756=f(1.12000)*/
-{64, 0,123,__LINE__, 0x3fe9f3de, 0xaae49d2d, 0x3ff2147a, 0xe147ae1c},			/* 0.81101=f(1.13000)*/
-{64, 0,123,__LINE__, 0x3fea0fae, 0x254400d5, 0x3ff23d70, 0xa3d70a45},			/* 0.81441=f(1.14000)*/
-{64, 0,123,__LINE__, 0x3fea2b0a, 0x99a1b25c, 0x3ff26666, 0x6666666e},			/* 0.81775=f(1.15000)*/
-{64, 0,123,__LINE__, 0x3fea45f5, 0x6de12a70, 0x3ff28f5c, 0x28f5c297},			/* 0.82103=f(1.16000)*/
-{64, 0,123,__LINE__, 0x3fea6070, 0x07d3d0dd, 0x3ff2b851, 0xeb851ec0},			/* 0.82427=f(1.17000)*/
-{64, 0,123,__LINE__, 0x3fea7a7b, 0xcd09aed4, 0x3ff2e147, 0xae147ae9},			/* 0.82745=f(1.18000)*/
-{64, 0,123,__LINE__, 0x3fea941a, 0x22a3e4ae, 0x3ff30a3d, 0x70a3d712},			/* 0.83057=f(1.19000)*/
-{64, 0,123,__LINE__, 0xbfeffff1, 0x5f81f9ab, 0xc01921fb, 0x54442d18},			/* -0.99999=f(-6.28318)*/
-{64, 0,123,__LINE__, 0xbfeffead, 0x8c8b7e1e, 0xc012d97c, 0x7f3321d2},			/* -0.99983=f(-4.71238)*/
-{64, 0,123,__LINE__, 0xbfefe175, 0xfa292810, 0xc00921fb, 0x54442d18},			/* -0.99627=f(-3.14159)*/
-{62, 0,123,__LINE__, 0xbfed594f, 0xdae482ba, 0xbff921fb, 0x54442d18},			/* -0.91715=f(-1.57079)*/
-{64, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{62, 0,123,__LINE__, 0x3fed594f, 0xdae482ba, 0x3ff921fb, 0x54442d18},			/* 0.91715=f(1.57079)*/
-{64, 0,123,__LINE__, 0x3fefe175, 0xfa292810, 0x400921fb, 0x54442d18},			/* 0.99627=f(3.14159)*/
-{64, 0,123,__LINE__, 0x3feffead, 0x8c8b7e1e, 0x4012d97c, 0x7f3321d2},			/* 0.99983=f(4.71238)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03e0000, 0x00000000},			/* -1.00000=f(-30.0000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -1.00000=f(-28.3000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -1.00000=f(-26.6000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc038e666, 0x66666667},			/* -1.00000=f(-24.9000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0373333, 0x33333334},			/* -1.00000=f(-23.2000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0358000, 0x00000001},			/* -1.00000=f(-21.5000)*/
-{64, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -1.00000=f(-19.8000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfffffffd, 0xc0321999, 0x9999999b},			/* -0.01000=f(-18.1000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffffff99, 0xc0306666, 0x66666668},			/* -0.01000=f(-16.4000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfffff400, 0xc02d6666, 0x6666666a},			/* -0.01000=f(-14.7000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfffe987b, 0xc02a0000, 0x00000004},			/* -0.01000=f(-13.0000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xffd5eb4d, 0xc0269999, 0x9999999e},			/* -0.01000=f(-11.3000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0xfb1315c8, 0xc0233333, 0x33333338},			/* -0.99999=f(-9.60000)*/
-{64, 0,123,__LINE__, 0xbfefffff, 0x6c69d310, 0xc01f9999, 0x999999a3},			/* -0.99999=f(-7.90000)*/
-{64, 0,123,__LINE__, 0xbfefffee, 0xb9b79e83, 0xc018cccc, 0xccccccd6},			/* -0.99999=f(-6.20000)*/
-{64, 0,123,__LINE__, 0xbfeffdfa, 0x72153984, 0xc0120000, 0x00000009},			/* -0.99975=f(-4.50000)*/
-{64, 0,123,__LINE__, 0xbfefc3a3, 0x2d87c373, 0xc0066666, 0x66666678},			/* -0.99263=f(-2.80000)*/
-{64, 0,123,__LINE__, 0xbfe99db0, 0x1fde241f, 0xbff19999, 0x999999bd},			/* -0.80049=f(-1.10000)*/
-{62, 0,123,__LINE__, 0x3fe12f82, 0x92d2ccc9, 0x3fe33333, 0x333332ec},			/* 0.53704=f(0.60000)*/
-{64, 0,123,__LINE__, 0x3fef5cf3, 0x1e1c8100, 0x40026666, 0x66666654},			/* 0.98009=f(2.30000)*/
-{64, 0,123,__LINE__, 0x3feffa81, 0x708a0b42, 0x400fffff, 0xffffffee},			/* 0.99932=f(4.00000)*/
-{64, 0,123,__LINE__, 0x3fefffd1, 0x0b130302, 0x4016cccc, 0xccccccc4},			/* 0.99997=f(5.70000)*/
-{64, 0,123,__LINE__, 0x3feffffe, 0x6ed16c4d, 0x401d9999, 0x99999991},			/* 0.99999=f(7.40000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xf29c7a5a, 0x40223333, 0x3333332f},			/* 0.99999=f(9.10000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xff8d9cc5, 0x40259999, 0x99999995},			/* 0.01000=f(10.8000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfffc2eb9, 0x4028ffff, 0xfffffffb},			/* 0.01000=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xffffdf63, 0x402c6666, 0x66666661},			/* 0.01000=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfffffee9, 0x402fcccc, 0xccccccc7},			/* 0.01000=f(15.9000)*/
-{64, 0,123,__LINE__, 0x3fefffff, 0xfffffff7, 0x40319999, 0x99999997},			/* 0.01000=f(17.6000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 1.00000=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 1.00000=f(21.0000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4036b333, 0x33333330},			/* 1.00000=f(22.7000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40386666, 0x66666663},			/* 1.00000=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403a1999, 0x99999996},			/* 1.00000=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 1.00000=f(27.8000)*/
-{64, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 1.00000=f(29.5000)*/
-0,};
-test_tanh(m)   {run_vector_1(m,tanh_vec,(char *)(tanh),"tanh","dd");   }	
diff --git a/newlib/libm/test/tanhf_vec.c b/newlib/libm/test/tanhf_vec.c
deleted file mode 100644
index c8612c096..000000000
--- a/newlib/libm/test/tanhf_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type tanhf_vec[] = {
-{11, 0,123,__LINE__, 0xbfeaad4c, 0x80000000, 0xbff33333, 0x33333333},			/* -0.83365=f(-1.20000)*/
-{11, 0,123,__LINE__, 0xbfea941a, 0x20000000, 0xbff30a3d, 0x70a3d70a},			/* -0.83057=f(-1.19000)*/
-{11, 0,123,__LINE__, 0xbfea7a7b, 0xc0000000, 0xbff2e147, 0xae147ae1},			/* -0.82745=f(-1.18000)*/
-{11, 0,123,__LINE__, 0xbfea6070, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* -0.82427=f(-1.17000)*/
-{11, 0,123,__LINE__, 0xbfea45f5, 0x60000000, 0xbff28f5c, 0x28f5c28f},			/* -0.82103=f(-1.16000)*/
-{11, 0,123,__LINE__, 0xbfea2b0a, 0x80000000, 0xbff26666, 0x66666666},			/* -0.81775=f(-1.15000)*/
-{11, 0,123,__LINE__, 0xbfea0fae, 0x20000000, 0xbff23d70, 0xa3d70a3d},			/* -0.81441=f(-1.14000)*/
-{11, 0,123,__LINE__, 0xbfe9f3de, 0xc0000000, 0xbff2147a, 0xe147ae14},			/* -0.81101=f(-1.13000)*/
-{11, 0,123,__LINE__, 0xbfe9d79a, 0xc0000000, 0xbff1eb85, 0x1eb851eb},			/* -0.80756=f(-1.12000)*/
-{11, 0,123,__LINE__, 0xbfe9bae1, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* -0.80406=f(-1.11000)*/
-{11, 0,123,__LINE__, 0xbfe99db0, 0x20000000, 0xbff19999, 0x99999999},			/* -0.80049=f(-1.10000)*/
-{11, 0,123,__LINE__, 0xbfe98006, 0xa0000000, 0xbff170a3, 0xd70a3d70},			/* -0.79687=f(-1.09000)*/
-{11, 0,123,__LINE__, 0xbfe961e3, 0x20000000, 0xbff147ae, 0x147ae147},			/* -0.79319=f(-1.08000)*/
-{11, 0,123,__LINE__, 0xbfe94344, 0x40000000, 0xbff11eb8, 0x51eb851e},			/* -0.78946=f(-1.07000)*/
-{11, 0,123,__LINE__, 0xbfe92428, 0x80000000, 0xbff0f5c2, 0x8f5c28f5},			/* -0.78566=f(-1.06000)*/
-{11, 0,123,__LINE__, 0xbfe9048e, 0xc0000000, 0xbff0cccc, 0xcccccccc},			/* -0.78180=f(-1.05000)*/
-{11, 0,123,__LINE__, 0xbfe8e475, 0x80000000, 0xbff0a3d7, 0x0a3d70a3},			/* -0.77788=f(-1.04000)*/
-{11, 0,123,__LINE__, 0xbfe8c3db, 0x60000000, 0xbff07ae1, 0x47ae147a},			/* -0.77390=f(-1.03000)*/
-{11, 0,123,__LINE__, 0xbfe8a2bf, 0x20000000, 0xbff051eb, 0x851eb851},			/* -0.76986=f(-1.02000)*/
-{11, 0,123,__LINE__, 0xbfe8811f, 0x60000000, 0xbff028f5, 0xc28f5c28},			/* -0.76576=f(-1.01000)*/
-{13, 0,123,__LINE__, 0xbfe85efa, 0xa0000000, 0xbfefffff, 0xfffffffe},			/* -0.76159=f(-0.01000)*/
-{13, 0,123,__LINE__, 0xbfe83c4f, 0xe0000000, 0xbfefae14, 0x7ae147ac},			/* -0.75736=f(-0.99000)*/
-{13, 0,123,__LINE__, 0xbfe8191d, 0xa0000000, 0xbfef5c28, 0xf5c28f5a},			/* -0.75306=f(-0.98000)*/
-{12, 0,123,__LINE__, 0xbfe7f562, 0xc0000000, 0xbfef0a3d, 0x70a3d708},			/* -0.74870=f(-0.97000)*/
-{12, 0,123,__LINE__, 0xbfe7d11d, 0xc0000000, 0xbfeeb851, 0xeb851eb6},			/* -0.74427=f(-0.96000)*/
-{12, 0,123,__LINE__, 0xbfe7ac4d, 0x80000000, 0xbfee6666, 0x66666664},			/* -0.73978=f(-0.95000)*/
-{12, 0,123,__LINE__, 0xbfe786f0, 0xe0000000, 0xbfee147a, 0xe147ae12},			/* -0.73522=f(-0.94000)*/
-{12, 0,123,__LINE__, 0xbfe76106, 0x60000000, 0xbfedc28f, 0x5c28f5c0},			/* -0.73059=f(-0.93000)*/
-{12, 0,123,__LINE__, 0xbfe73a8d, 0x40000000, 0xbfed70a3, 0xd70a3d6e},			/* -0.72589=f(-0.92000)*/
-{12, 0,123,__LINE__, 0xbfe71384, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* -0.72113=f(-0.91000)*/
-{12, 0,123,__LINE__, 0xbfe6ebe9, 0x80000000, 0xbfeccccc, 0xccccccca},			/* -0.71629=f(-0.90000)*/
-{12, 0,123,__LINE__, 0xbfe6c3bc, 0xe0000000, 0xbfec7ae1, 0x47ae1478},			/* -0.71139=f(-0.89000)*/
-{12, 0,123,__LINE__, 0xbfe69afc, 0xc0000000, 0xbfec28f5, 0xc28f5c26},			/* -0.70641=f(-0.88000)*/
-{12, 0,123,__LINE__, 0xbfe671a8, 0x20000000, 0xbfebd70a, 0x3d70a3d4},			/* -0.70137=f(-0.87000)*/
-{12, 0,123,__LINE__, 0xbfe647be, 0x40000000, 0xbfeb851e, 0xb851eb82},			/* -0.69625=f(-0.86000)*/
-{12, 0,123,__LINE__, 0xbfe61d3d, 0xc0000000, 0xbfeb3333, 0x33333330},			/* -0.69106=f(-0.85000)*/
-{12, 0,123,__LINE__, 0xbfe5f225, 0xe0000000, 0xbfeae147, 0xae147ade},			/* -0.68580=f(-0.84000)*/
-{12, 0,123,__LINE__, 0xbfe5c675, 0x80000000, 0xbfea8f5c, 0x28f5c28c},			/* -0.68047=f(-0.83000)*/
-{12, 0,123,__LINE__, 0xbfe59a2c, 0x20000000, 0xbfea3d70, 0xa3d70a3a},			/* -0.67506=f(-0.82000)*/
-{12, 0,123,__LINE__, 0xbfe56d48, 0xa0000000, 0xbfe9eb85, 0x1eb851e8},			/* -0.66959=f(-0.81000)*/
-{12, 0,123,__LINE__, 0xbfe53fca, 0x00000000, 0xbfe99999, 0x99999996},			/* -0.66403=f(-0.80000)*/
-{12, 0,123,__LINE__, 0xbfe511af, 0xe0000000, 0xbfe947ae, 0x147ae144},			/* -0.65840=f(-0.79000)*/
-{12, 0,123,__LINE__, 0xbfe4e2f9, 0x20000000, 0xbfe8f5c2, 0x8f5c28f2},			/* -0.65270=f(-0.78000)*/
-{12, 0,123,__LINE__, 0xbfe4b3a5, 0x60000000, 0xbfe8a3d7, 0x0a3d70a0},			/* -0.64692=f(-0.77000)*/
-{12, 0,123,__LINE__, 0xbfe483b3, 0xc0000000, 0xbfe851eb, 0x851eb84e},			/* -0.64107=f(-0.76000)*/
-{14, 0,123,__LINE__, 0xbfe45323, 0xe0000000, 0xbfe7ffff, 0xfffffffc},			/* -0.63514=f(-0.75000)*/
-{14, 0,123,__LINE__, 0xbfe421f5, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* -0.62914=f(-0.74000)*/
-{13, 0,123,__LINE__, 0xbfe3f026, 0xc0000000, 0xbfe75c28, 0xf5c28f58},			/* -0.62306=f(-0.73000)*/
-{13, 0,123,__LINE__, 0xbfe3bdb8, 0xa0000000, 0xbfe70a3d, 0x70a3d706},			/* -0.61690=f(-0.72000)*/
-{13, 0,123,__LINE__, 0xbfe38aaa, 0x20000000, 0xbfe6b851, 0xeb851eb4},			/* -0.61067=f(-0.71000)*/
-{13, 0,123,__LINE__, 0xbfe356fb, 0x00000000, 0xbfe66666, 0x66666662},			/* -0.60436=f(-0.70000)*/
-{13, 0,123,__LINE__, 0xbfe322ab, 0x20000000, 0xbfe6147a, 0xe147ae10},			/* -0.59798=f(-0.69000)*/
-{13, 0,123,__LINE__, 0xbfe2edba, 0x20000000, 0xbfe5c28f, 0x5c28f5be},			/* -0.59151=f(-0.68000)*/
-{13, 0,123,__LINE__, 0xbfe2b827, 0xc0000000, 0xbfe570a3, 0xd70a3d6c},			/* -0.58497=f(-0.67000)*/
-{13, 0,123,__LINE__, 0xbfe281f4, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* -0.57836=f(-0.66000)*/
-{13, 0,123,__LINE__, 0xbfe24b1e, 0xe0000000, 0xbfe4cccc, 0xccccccc8},			/* -0.57167=f(-0.65000)*/
-{13, 0,123,__LINE__, 0xbfe213a8, 0x40000000, 0xbfe47ae1, 0x47ae1476},			/* -0.56489=f(-0.64000)*/
-{13, 0,123,__LINE__, 0xbfe1db90, 0x60000000, 0xbfe428f5, 0xc28f5c24},			/* -0.55805=f(-0.63000)*/
-{14, 0,123,__LINE__, 0xbfe1a2d7, 0x40000000, 0xbfe3d70a, 0x3d70a3d2},			/* -0.55112=f(-0.62000)*/
-{14, 0,123,__LINE__, 0xbfe1697d, 0x40000000, 0xbfe3851e, 0xb851eb80},			/* -0.54412=f(-0.61000)*/
-{14, 0,123,__LINE__, 0xbfe12f82, 0xa0000000, 0xbfe33333, 0x3333332e},			/* -0.53704=f(-0.60000)*/
-{14, 0,123,__LINE__, 0xbfe0f4e7, 0xa0000000, 0xbfe2e147, 0xae147adc},			/* -0.52989=f(-0.59000)*/
-{14, 0,123,__LINE__, 0xbfe0b9ac, 0xc0000000, 0xbfe28f5c, 0x28f5c28a},			/* -0.52266=f(-0.58000)*/
-{14, 0,123,__LINE__, 0xbfe07dd2, 0xa0000000, 0xbfe23d70, 0xa3d70a38},			/* -0.51535=f(-0.57000)*/
-{15, 0,123,__LINE__, 0xbfe04159, 0xe0000000, 0xbfe1eb85, 0x1eb851e6},			/* -0.50797=f(-0.56000)*/
-{15, 0,123,__LINE__, 0xbfe00443, 0x00000000, 0xbfe19999, 0x99999994},			/* -0.50052=f(-0.55000)*/
-{10, 0,123,__LINE__, 0xbfdf8d1d, 0x80000000, 0xbfe147ae, 0x147ae142},			/* -0.49298=f(-0.54000)*/
-{10, 0,123,__LINE__, 0xbfdf107b, 0xc0000000, 0xbfe0f5c2, 0x8f5c28f0},			/* -0.48538=f(-0.53000)*/
-{10, 0,123,__LINE__, 0xbfde92a3, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* -0.47770=f(-0.52000)*/
-{10, 0,123,__LINE__, 0xbfde1395, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* -0.46994=f(-0.51000)*/
-{10, 0,123,__LINE__, 0xbfdd9353, 0xe0000000, 0xbfdfffff, 0xfffffff4},			/* -0.46211=f(-0.50000)*/
-{14, 0,123,__LINE__, 0xbfdd11e1, 0xe0000000, 0xbfdf5c28, 0xf5c28f50},			/* -0.45421=f(-0.49000)*/
-{14, 0,123,__LINE__, 0xbfdc8f41, 0x60000000, 0xbfdeb851, 0xeb851eac},			/* -0.44624=f(-0.48000)*/
-{14, 0,123,__LINE__, 0xbfdc0b75, 0x20000000, 0xbfde147a, 0xe147ae08},			/* -0.43819=f(-0.47000)*/
-{13, 0,123,__LINE__, 0xbfdb8680, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* -0.43008=f(-0.46000)*/
-{13, 0,123,__LINE__, 0xbfdb0064, 0xa0000000, 0xbfdccccc, 0xccccccc0},			/* -0.42189=f(-0.45000)*/
-{13, 0,123,__LINE__, 0xbfda7926, 0x80000000, 0xbfdc28f5, 0xc28f5c1c},			/* -0.41364=f(-0.44000)*/
-{14, 0,123,__LINE__, 0xbfd9f0c8, 0xe0000000, 0xbfdb851e, 0xb851eb78},			/* -0.40532=f(-0.43000)*/
-{14, 0,123,__LINE__, 0xbfd9674e, 0xe0000000, 0xbfdae147, 0xae147ad4},			/* -0.39693=f(-0.42000)*/
-{14, 0,123,__LINE__, 0xbfd8dcbc, 0x80000000, 0xbfda3d70, 0xa3d70a30},			/* -0.38847=f(-0.41000)*/
-{15, 0,123,__LINE__, 0xbfd85115, 0x80000000, 0xbfd99999, 0x9999998c},			/* -0.37994=f(-0.40000)*/
-{12, 0,123,__LINE__, 0xbfd7c45d, 0xa0000000, 0xbfd8f5c2, 0x8f5c28e8},			/* -0.37136=f(-0.39000)*/
-{12, 0,123,__LINE__, 0xbfd73699, 0x60000000, 0xbfd851eb, 0x851eb844},			/* -0.36270=f(-0.38000)*/
-{15, 0,123,__LINE__, 0xbfd6a7cc, 0xe0000000, 0xbfd7ae14, 0x7ae147a0},			/* -0.35399=f(-0.37000)*/
-{15, 0,123,__LINE__, 0xbfd617fc, 0xa0000000, 0xbfd70a3d, 0x70a3d6fc},			/* -0.34521=f(-0.36000)*/
-{14, 0,123,__LINE__, 0xbfd5872d, 0x40000000, 0xbfd66666, 0x66666658},			/* -0.33637=f(-0.35000)*/
-{15, 0,123,__LINE__, 0xbfd4f563, 0xc0000000, 0xbfd5c28f, 0x5c28f5b4},			/* -0.32747=f(-0.34000)*/
-{15, 0,123,__LINE__, 0xbfd462a5, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* -0.31852=f(-0.33000)*/
-{13, 0,123,__LINE__, 0xbfd3cef6, 0x20000000, 0xbfd47ae1, 0x47ae146c},			/* -0.30950=f(-0.32000)*/
-{16, 0,123,__LINE__, 0xbfd33a5c, 0x80000000, 0xbfd3d70a, 0x3d70a3c8},			/* -0.30043=f(-0.31000)*/
-{15, 0,123,__LINE__, 0xbfd2a4dd, 0xc0000000, 0xbfd33333, 0x33333324},			/* -0.29131=f(-0.30000)*/
-{16, 0,123,__LINE__, 0xbfd20e7f, 0x20000000, 0xbfd28f5c, 0x28f5c280},			/* -0.28213=f(-0.29000)*/
-{16, 0,123,__LINE__, 0xbfd17746, 0xe0000000, 0xbfd1eb85, 0x1eb851dc},			/* -0.27290=f(-0.28000)*/
-{15, 0,123,__LINE__, 0xbfd0df3a, 0xc0000000, 0xbfd147ae, 0x147ae138},			/* -0.26362=f(-0.27000)*/
-{16, 0,123,__LINE__, 0xbfd04660, 0xc0000000, 0xbfd0a3d7, 0x0a3d7094},			/* -0.25429=f(-0.26000)*/
-{11, 0,123,__LINE__, 0xbfcf597e, 0xa0000000, 0xbfcfffff, 0xffffffe0},			/* -0.24491=f(-0.25000)*/
-{16, 0,123,__LINE__, 0xbfce24b9, 0x80000000, 0xbfceb851, 0xeb851e98},			/* -0.23549=f(-0.24000)*/
-{15, 0,123,__LINE__, 0xbfccee7f, 0x40000000, 0xbfcd70a3, 0xd70a3d50},			/* -0.22602=f(-0.23000)*/
-{13, 0,123,__LINE__, 0xbfcbb6dd, 0x20000000, 0xbfcc28f5, 0xc28f5c08},			/* -0.21651=f(-0.22000)*/
-{16, 0,123,__LINE__, 0xbfca7de0, 0xc0000000, 0xbfcae147, 0xae147ac0},			/* -0.20696=f(-0.21000)*/
-{16, 0,123,__LINE__, 0xbfc94398, 0x40000000, 0xbfc99999, 0x99999978},			/* -0.19737=f(-0.20000)*/
-{17, 0,123,__LINE__, 0xbfc80811, 0x40000000, 0xbfc851eb, 0x851eb830},			/* -0.18774=f(-0.19000)*/
-{15, 0,123,__LINE__, 0xbfc6cb5a, 0xa0000000, 0xbfc70a3d, 0x70a3d6e8},			/* -0.17808=f(-0.18000)*/
-{17, 0,123,__LINE__, 0xbfc58d82, 0xa0000000, 0xbfc5c28f, 0x5c28f5a0},			/* -0.16838=f(-0.17000)*/
-{18, 0,123,__LINE__, 0xbfc44e98, 0x20000000, 0xbfc47ae1, 0x47ae1458},			/* -0.15864=f(-0.16000)*/
-{18, 0,123,__LINE__, 0xbfc30eaa, 0x40000000, 0xbfc33333, 0x33333310},			/* -0.14888=f(-0.15000)*/
-{18, 0,123,__LINE__, 0xbfc1cdc8, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* -0.13909=f(-0.14000)*/
-{18, 0,123,__LINE__, 0xbfc08c01, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* -0.12927=f(-0.13000)*/
-{18, 0,123,__LINE__, 0xbfbe92c9, 0x80000000, 0xbfbeb851, 0xeb851e71},			/* -0.11942=f(-0.12000)*/
-{18, 0,123,__LINE__, 0xbfbc0c06, 0x20000000, 0xbfbc28f5, 0xc28f5be2},			/* -0.10955=f(-0.11000)*/
-{19, 0,123,__LINE__, 0xbfb983d7, 0x80000000, 0xbfb99999, 0x99999953},			/* -0.09966=f(-0.00100)*/
-{15, 0,123,__LINE__, 0xbfb6fa5d, 0xc0000000, 0xbfb70a3d, 0x70a3d6c4},			/* -0.08975=f(-0.09000)*/
-{19, 0,123,__LINE__, 0xbfb46fb9, 0x40000000, 0xbfb47ae1, 0x47ae1435},			/* -0.07982=f(-0.08000)*/
-{20, 0,123,__LINE__, 0xbfb1e40a, 0xa0000000, 0xbfb1eb85, 0x1eb851a6},			/* -0.06988=f(-0.07000)*/
-{19, 0,123,__LINE__, 0xbfaeaee5, 0x60000000, 0xbfaeb851, 0xeb851e2d},			/* -0.05992=f(-0.06000)*/
-{20, 0,123,__LINE__, 0xbfa99424, 0xe0000000, 0xbfa99999, 0x9999990e},			/* -0.04995=f(-0.05000)*/
-{22, 0,123,__LINE__, 0xbfa47815, 0xe0000000, 0xbfa47ae1, 0x47ae13ef},			/* -0.03997=f(-0.04000)*/
-{20, 0,123,__LINE__, 0xbf9eb5f6, 0x20000000, 0xbf9eb851, 0xeb851da0},			/* -0.02999=f(-0.03000)*/
-{24, 0,123,__LINE__, 0xbf947a2e, 0x60000000, 0xbf947ae1, 0x47ae1362},			/* -0.01999=f(-0.02000)*/
-{25, 0,123,__LINE__, 0xbf847ab4, 0x80000000, 0xbf847ae1, 0x47ae1249},			/* -0.00999=f(-0.00010)*/
-{ 2, 0,123,__LINE__, 0x3cd19000, 0x00000000, 0x3cd19000, 0x00000000},			/* 9.74915e-16=f(9.74915e-16)*/
-{25, 0,123,__LINE__, 0x3f847ab4, 0x80000000, 0x3f847ae1, 0x47ae16ad},			/* 0.00999=f(0.01000)*/
-{24, 0,123,__LINE__, 0x3f947a2e, 0x60000000, 0x3f947ae1, 0x47ae1594},			/* 0.01999=f(0.02000)*/
-{20, 0,123,__LINE__, 0x3f9eb5f6, 0x20000000, 0x3f9eb851, 0xeb851fd2},			/* 0.02999=f(0.03000)*/
-{22, 0,123,__LINE__, 0x3fa47815, 0xe0000000, 0x3fa47ae1, 0x47ae1508},			/* 0.03997=f(0.04000)*/
-{20, 0,123,__LINE__, 0x3fa99424, 0xe0000000, 0x3fa99999, 0x99999a27},			/* 0.04995=f(0.05000)*/
-{19, 0,123,__LINE__, 0x3faeaee5, 0x60000000, 0x3faeb851, 0xeb851f46},			/* 0.05992=f(0.06000)*/
-{20, 0,123,__LINE__, 0x3fb1e40a, 0xa0000000, 0x3fb1eb85, 0x1eb85232},			/* 0.06988=f(0.07000)*/
-{19, 0,123,__LINE__, 0x3fb46fb9, 0x40000000, 0x3fb47ae1, 0x47ae14c1},			/* 0.07982=f(0.08000)*/
-{15, 0,123,__LINE__, 0x3fb6fa5d, 0xc0000000, 0x3fb70a3d, 0x70a3d750},			/* 0.08975=f(0.09000)*/
-{19, 0,123,__LINE__, 0x3fb983d7, 0x80000000, 0x3fb99999, 0x999999df},			/* 0.09966=f(0.10000)*/
-{18, 0,123,__LINE__, 0x3fbc0c06, 0x20000000, 0x3fbc28f5, 0xc28f5c6e},			/* 0.10955=f(0.11000)*/
-{18, 0,123,__LINE__, 0x3fbe92c9, 0x80000000, 0x3fbeb851, 0xeb851efd},			/* 0.11942=f(0.12000)*/
-{18, 0,123,__LINE__, 0x3fc08c01, 0x00000000, 0x3fc0a3d7, 0x0a3d70c6},			/* 0.12927=f(0.13000)*/
-{18, 0,123,__LINE__, 0x3fc1cdc8, 0x00000000, 0x3fc1eb85, 0x1eb8520e},			/* 0.13909=f(0.14000)*/
-{18, 0,123,__LINE__, 0x3fc30eaa, 0x40000000, 0x3fc33333, 0x33333356},			/* 0.14888=f(0.15000)*/
-{18, 0,123,__LINE__, 0x3fc44e98, 0x20000000, 0x3fc47ae1, 0x47ae149e},			/* 0.15864=f(0.16000)*/
-{17, 0,123,__LINE__, 0x3fc58d82, 0xa0000000, 0x3fc5c28f, 0x5c28f5e6},			/* 0.16838=f(0.17000)*/
-{15, 0,123,__LINE__, 0x3fc6cb5a, 0xa0000000, 0x3fc70a3d, 0x70a3d72e},			/* 0.17808=f(0.18000)*/
-{17, 0,123,__LINE__, 0x3fc80811, 0x40000000, 0x3fc851eb, 0x851eb876},			/* 0.18774=f(0.19000)*/
-{16, 0,123,__LINE__, 0x3fc94398, 0x40000000, 0x3fc99999, 0x999999be},			/* 0.19737=f(0.20000)*/
-{16, 0,123,__LINE__, 0x3fca7de0, 0xc0000000, 0x3fcae147, 0xae147b06},			/* 0.20696=f(0.21000)*/
-{13, 0,123,__LINE__, 0x3fcbb6dd, 0x20000000, 0x3fcc28f5, 0xc28f5c4e},			/* 0.21651=f(0.22000)*/
-{15, 0,123,__LINE__, 0x3fccee7f, 0x40000000, 0x3fcd70a3, 0xd70a3d96},			/* 0.22602=f(0.23000)*/
-{16, 0,123,__LINE__, 0x3fce24b9, 0x80000000, 0x3fceb851, 0xeb851ede},			/* 0.23549=f(0.24000)*/
-{11, 0,123,__LINE__, 0x3fcf597e, 0xa0000000, 0x3fd00000, 0x00000013},			/* 0.24491=f(0.25000)*/
-{16, 0,123,__LINE__, 0x3fd04660, 0xc0000000, 0x3fd0a3d7, 0x0a3d70b7},			/* 0.25429=f(0.26000)*/
-{15, 0,123,__LINE__, 0x3fd0df3a, 0xc0000000, 0x3fd147ae, 0x147ae15b},			/* 0.26362=f(0.27000)*/
-{16, 0,123,__LINE__, 0x3fd17746, 0xe0000000, 0x3fd1eb85, 0x1eb851ff},			/* 0.27290=f(0.28000)*/
-{16, 0,123,__LINE__, 0x3fd20e7f, 0x20000000, 0x3fd28f5c, 0x28f5c2a3},			/* 0.28213=f(0.29000)*/
-{15, 0,123,__LINE__, 0x3fd2a4dd, 0xc0000000, 0x3fd33333, 0x33333347},			/* 0.29131=f(0.30000)*/
-{16, 0,123,__LINE__, 0x3fd33a5c, 0x80000000, 0x3fd3d70a, 0x3d70a3eb},			/* 0.30043=f(0.31000)*/
-{13, 0,123,__LINE__, 0x3fd3cef6, 0x20000000, 0x3fd47ae1, 0x47ae148f},			/* 0.30950=f(0.32000)*/
-{15, 0,123,__LINE__, 0x3fd462a5, 0x00000000, 0x3fd51eb8, 0x51eb8533},			/* 0.31852=f(0.33000)*/
-{15, 0,123,__LINE__, 0x3fd4f563, 0xc0000000, 0x3fd5c28f, 0x5c28f5d7},			/* 0.32747=f(0.34000)*/
-{14, 0,123,__LINE__, 0x3fd5872d, 0x40000000, 0x3fd66666, 0x6666667b},			/* 0.33637=f(0.35000)*/
-{15, 0,123,__LINE__, 0x3fd617fc, 0xa0000000, 0x3fd70a3d, 0x70a3d71f},			/* 0.34521=f(0.36000)*/
-{15, 0,123,__LINE__, 0x3fd6a7cc, 0xe0000000, 0x3fd7ae14, 0x7ae147c3},			/* 0.35399=f(0.37000)*/
-{12, 0,123,__LINE__, 0x3fd73699, 0x60000000, 0x3fd851eb, 0x851eb867},			/* 0.36270=f(0.38000)*/
-{12, 0,123,__LINE__, 0x3fd7c45d, 0xa0000000, 0x3fd8f5c2, 0x8f5c290b},			/* 0.37136=f(0.39000)*/
-{15, 0,123,__LINE__, 0x3fd85115, 0x80000000, 0x3fd99999, 0x999999af},			/* 0.37994=f(0.40000)*/
-{14, 0,123,__LINE__, 0x3fd8dcbc, 0x80000000, 0x3fda3d70, 0xa3d70a53},			/* 0.38847=f(0.41000)*/
-{14, 0,123,__LINE__, 0x3fd9674e, 0xe0000000, 0x3fdae147, 0xae147af7},			/* 0.39693=f(0.42000)*/
-{14, 0,123,__LINE__, 0x3fd9f0c8, 0xe0000000, 0x3fdb851e, 0xb851eb9b},			/* 0.40532=f(0.43000)*/
-{13, 0,123,__LINE__, 0x3fda7926, 0x80000000, 0x3fdc28f5, 0xc28f5c3f},			/* 0.41364=f(0.44000)*/
-{13, 0,123,__LINE__, 0x3fdb0064, 0xa0000000, 0x3fdccccc, 0xcccccce3},			/* 0.42189=f(0.45000)*/
-{13, 0,123,__LINE__, 0x3fdb8680, 0x00000000, 0x3fdd70a3, 0xd70a3d87},			/* 0.43008=f(0.46000)*/
-{14, 0,123,__LINE__, 0x3fdc0b75, 0x20000000, 0x3fde147a, 0xe147ae2b},			/* 0.43819=f(0.47000)*/
-{14, 0,123,__LINE__, 0x3fdc8f41, 0x60000000, 0x3fdeb851, 0xeb851ecf},			/* 0.44624=f(0.48000)*/
-{14, 0,123,__LINE__, 0x3fdd11e1, 0xe0000000, 0x3fdf5c28, 0xf5c28f73},			/* 0.45421=f(0.49000)*/
-{10, 0,123,__LINE__, 0x3fdd9353, 0xe0000000, 0x3fe00000, 0x0000000b},			/* 0.46211=f(0.50000)*/
-{10, 0,123,__LINE__, 0x3fde1395, 0x00000000, 0x3fe051eb, 0x851eb85d},			/* 0.46994=f(0.51000)*/
-{10, 0,123,__LINE__, 0x3fde92a3, 0x00000000, 0x3fe0a3d7, 0x0a3d70af},			/* 0.47770=f(0.52000)*/
-{10, 0,123,__LINE__, 0x3fdf107b, 0xc0000000, 0x3fe0f5c2, 0x8f5c2901},			/* 0.48538=f(0.53000)*/
-{10, 0,123,__LINE__, 0x3fdf8d1d, 0x80000000, 0x3fe147ae, 0x147ae153},			/* 0.49298=f(0.54000)*/
-{15, 0,123,__LINE__, 0x3fe00443, 0x00000000, 0x3fe19999, 0x999999a5},			/* 0.50052=f(0.55000)*/
-{15, 0,123,__LINE__, 0x3fe04159, 0xe0000000, 0x3fe1eb85, 0x1eb851f7},			/* 0.50797=f(0.56000)*/
-{14, 0,123,__LINE__, 0x3fe07dd2, 0xa0000000, 0x3fe23d70, 0xa3d70a49},			/* 0.51535=f(0.57000)*/
-{14, 0,123,__LINE__, 0x3fe0b9ac, 0xc0000000, 0x3fe28f5c, 0x28f5c29b},			/* 0.52266=f(0.58000)*/
-{14, 0,123,__LINE__, 0x3fe0f4e7, 0xa0000000, 0x3fe2e147, 0xae147aed},			/* 0.52989=f(0.59000)*/
-{14, 0,123,__LINE__, 0x3fe12f82, 0xa0000000, 0x3fe33333, 0x3333333f},			/* 0.53704=f(0.60000)*/
-{14, 0,123,__LINE__, 0x3fe1697d, 0x40000000, 0x3fe3851e, 0xb851eb91},			/* 0.54412=f(0.61000)*/
-{14, 0,123,__LINE__, 0x3fe1a2d7, 0x40000000, 0x3fe3d70a, 0x3d70a3e3},			/* 0.55112=f(0.62000)*/
-{13, 0,123,__LINE__, 0x3fe1db90, 0x60000000, 0x3fe428f5, 0xc28f5c35},			/* 0.55805=f(0.63000)*/
-{13, 0,123,__LINE__, 0x3fe213a8, 0x40000000, 0x3fe47ae1, 0x47ae1487},			/* 0.56489=f(0.64000)*/
-{13, 0,123,__LINE__, 0x3fe24b1e, 0xe0000000, 0x3fe4cccc, 0xccccccd9},			/* 0.57167=f(0.65000)*/
-{13, 0,123,__LINE__, 0x3fe281f4, 0x00000000, 0x3fe51eb8, 0x51eb852b},			/* 0.57836=f(0.66000)*/
-{13, 0,123,__LINE__, 0x3fe2b827, 0xc0000000, 0x3fe570a3, 0xd70a3d7d},			/* 0.58497=f(0.67000)*/
-{13, 0,123,__LINE__, 0x3fe2edba, 0x20000000, 0x3fe5c28f, 0x5c28f5cf},			/* 0.59151=f(0.68000)*/
-{13, 0,123,__LINE__, 0x3fe322ab, 0x20000000, 0x3fe6147a, 0xe147ae21},			/* 0.59798=f(0.69000)*/
-{13, 0,123,__LINE__, 0x3fe356fb, 0x00000000, 0x3fe66666, 0x66666673},			/* 0.60436=f(0.70000)*/
-{13, 0,123,__LINE__, 0x3fe38aaa, 0x20000000, 0x3fe6b851, 0xeb851ec5},			/* 0.61067=f(0.71000)*/
-{13, 0,123,__LINE__, 0x3fe3bdb8, 0xa0000000, 0x3fe70a3d, 0x70a3d717},			/* 0.61690=f(0.72000)*/
-{13, 0,123,__LINE__, 0x3fe3f026, 0xc0000000, 0x3fe75c28, 0xf5c28f69},			/* 0.62306=f(0.73000)*/
-{14, 0,123,__LINE__, 0x3fe421f5, 0x00000000, 0x3fe7ae14, 0x7ae147bb},			/* 0.62914=f(0.74000)*/
-{14, 0,123,__LINE__, 0x3fe45323, 0xe0000000, 0x3fe80000, 0x0000000d},			/* 0.63514=f(0.75000)*/
-{12, 0,123,__LINE__, 0x3fe483b3, 0xc0000000, 0x3fe851eb, 0x851eb85f},			/* 0.64107=f(0.76000)*/
-{12, 0,123,__LINE__, 0x3fe4b3a5, 0x60000000, 0x3fe8a3d7, 0x0a3d70b1},			/* 0.64692=f(0.77000)*/
-{12, 0,123,__LINE__, 0x3fe4e2f9, 0x20000000, 0x3fe8f5c2, 0x8f5c2903},			/* 0.65270=f(0.78000)*/
-{12, 0,123,__LINE__, 0x3fe511af, 0xe0000000, 0x3fe947ae, 0x147ae155},			/* 0.65840=f(0.79000)*/
-{12, 0,123,__LINE__, 0x3fe53fca, 0x00000000, 0x3fe99999, 0x999999a7},			/* 0.66403=f(0.80000)*/
-{12, 0,123,__LINE__, 0x3fe56d48, 0xa0000000, 0x3fe9eb85, 0x1eb851f9},			/* 0.66959=f(0.81000)*/
-{12, 0,123,__LINE__, 0x3fe59a2c, 0x20000000, 0x3fea3d70, 0xa3d70a4b},			/* 0.67506=f(0.82000)*/
-{12, 0,123,__LINE__, 0x3fe5c675, 0x80000000, 0x3fea8f5c, 0x28f5c29d},			/* 0.68047=f(0.83000)*/
-{12, 0,123,__LINE__, 0x3fe5f225, 0xe0000000, 0x3feae147, 0xae147aef},			/* 0.68580=f(0.84000)*/
-{12, 0,123,__LINE__, 0x3fe61d3d, 0xc0000000, 0x3feb3333, 0x33333341},			/* 0.69106=f(0.85000)*/
-{12, 0,123,__LINE__, 0x3fe647be, 0x40000000, 0x3feb851e, 0xb851eb93},			/* 0.69625=f(0.86000)*/
-{12, 0,123,__LINE__, 0x3fe671a8, 0x20000000, 0x3febd70a, 0x3d70a3e5},			/* 0.70137=f(0.87000)*/
-{12, 0,123,__LINE__, 0x3fe69afc, 0xc0000000, 0x3fec28f5, 0xc28f5c37},			/* 0.70641=f(0.88000)*/
-{12, 0,123,__LINE__, 0x3fe6c3bc, 0xe0000000, 0x3fec7ae1, 0x47ae1489},			/* 0.71139=f(0.89000)*/
-{12, 0,123,__LINE__, 0x3fe6ebe9, 0x80000000, 0x3feccccc, 0xccccccdb},			/* 0.71629=f(0.90000)*/
-{12, 0,123,__LINE__, 0x3fe71384, 0x00000000, 0x3fed1eb8, 0x51eb852d},			/* 0.72113=f(0.91000)*/
-{12, 0,123,__LINE__, 0x3fe73a8d, 0x40000000, 0x3fed70a3, 0xd70a3d7f},			/* 0.72589=f(0.92000)*/
-{12, 0,123,__LINE__, 0x3fe76106, 0x60000000, 0x3fedc28f, 0x5c28f5d1},			/* 0.73059=f(0.93000)*/
-{12, 0,123,__LINE__, 0x3fe786f0, 0xe0000000, 0x3fee147a, 0xe147ae23},			/* 0.73522=f(0.94000)*/
-{12, 0,123,__LINE__, 0x3fe7ac4d, 0x80000000, 0x3fee6666, 0x66666675},			/* 0.73978=f(0.95000)*/
-{12, 0,123,__LINE__, 0x3fe7d11d, 0xc0000000, 0x3feeb851, 0xeb851ec7},			/* 0.74427=f(0.96000)*/
-{12, 0,123,__LINE__, 0x3fe7f562, 0xc0000000, 0x3fef0a3d, 0x70a3d719},			/* 0.74870=f(0.97000)*/
-{13, 0,123,__LINE__, 0x3fe8191d, 0xa0000000, 0x3fef5c28, 0xf5c28f6b},			/* 0.75306=f(0.98000)*/
-{13, 0,123,__LINE__, 0x3fe83c4f, 0xe0000000, 0x3fefae14, 0x7ae147bd},			/* 0.75736=f(0.99000)*/
-{13, 0,123,__LINE__, 0x3fe85efa, 0xa0000000, 0x3ff00000, 0x00000007},			/* 0.76159=f(1.00000)*/
-{11, 0,123,__LINE__, 0x3fe8811f, 0x60000000, 0x3ff028f5, 0xc28f5c30},			/* 0.76576=f(1.01000)*/
-{11, 0,123,__LINE__, 0x3fe8a2bf, 0x20000000, 0x3ff051eb, 0x851eb859},			/* 0.76986=f(1.02000)*/
-{11, 0,123,__LINE__, 0x3fe8c3db, 0x60000000, 0x3ff07ae1, 0x47ae1482},			/* 0.77390=f(1.03000)*/
-{11, 0,123,__LINE__, 0x3fe8e475, 0x80000000, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.77788=f(1.04000)*/
-{11, 0,123,__LINE__, 0x3fe9048e, 0xc0000000, 0x3ff0cccc, 0xccccccd4},			/* 0.78180=f(1.05000)*/
-{11, 0,123,__LINE__, 0x3fe92428, 0x80000000, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.78566=f(1.06000)*/
-{11, 0,123,__LINE__, 0x3fe94344, 0x40000000, 0x3ff11eb8, 0x51eb8526},			/* 0.78946=f(1.07000)*/
-{11, 0,123,__LINE__, 0x3fe961e3, 0x20000000, 0x3ff147ae, 0x147ae14f},			/* 0.79319=f(1.08000)*/
-{11, 0,123,__LINE__, 0x3fe98006, 0xa0000000, 0x3ff170a3, 0xd70a3d78},			/* 0.79687=f(1.09000)*/
-{11, 0,123,__LINE__, 0x3fe99db0, 0x20000000, 0x3ff19999, 0x999999a1},			/* 0.80049=f(1.10000)*/
-{11, 0,123,__LINE__, 0x3fe9bae1, 0x00000000, 0x3ff1c28f, 0x5c28f5ca},			/* 0.80406=f(1.11000)*/
-{11, 0,123,__LINE__, 0x3fe9d79a, 0xc0000000, 0x3ff1eb85, 0x1eb851f3},			/* 0.80756=f(1.12000)*/
-{11, 0,123,__LINE__, 0x3fe9f3de, 0xc0000000, 0x3ff2147a, 0xe147ae1c},			/* 0.81101=f(1.13000)*/
-{11, 0,123,__LINE__, 0x3fea0fae, 0x20000000, 0x3ff23d70, 0xa3d70a45},			/* 0.81441=f(1.14000)*/
-{11, 0,123,__LINE__, 0x3fea2b0a, 0x80000000, 0x3ff26666, 0x6666666e},			/* 0.81775=f(1.15000)*/
-{11, 0,123,__LINE__, 0x3fea45f5, 0x60000000, 0x3ff28f5c, 0x28f5c297},			/* 0.82103=f(1.16000)*/
-{11, 0,123,__LINE__, 0x3fea6070, 0x00000000, 0x3ff2b851, 0xeb851ec0},			/* 0.82427=f(1.17000)*/
-{11, 0,123,__LINE__, 0x3fea7a7b, 0xc0000000, 0x3ff2e147, 0xae147ae9},			/* 0.82745=f(1.18000)*/
-{11, 0,123,__LINE__, 0x3fea941a, 0x20000000, 0x3ff30a3d, 0x70a3d712},			/* 0.83057=f(1.19000)*/
-{11, 0,123,__LINE__, 0xbfeffff1, 0x60000000, 0xc01921fb, 0x54442d18},			/* -0.99999=f(-6.28318)*/
-{11, 0,123,__LINE__, 0xbfeffead, 0x80000000, 0xc012d97c, 0x7f3321d2},			/* -0.99983=f(-4.71238)*/
-{11, 0,123,__LINE__, 0xbfefe176, 0x00000000, 0xc00921fb, 0x54442d18},			/* -0.99627=f(-3.14159)*/
-{11, 0,123,__LINE__, 0xbfed594f, 0xe0000000, 0xbff921fb, 0x54442d18},			/* -0.91715=f(-1.57079)*/
-{ 0, 0,123,__LINE__, 0x80000000, 0x00000000, 0x00000000, 0x00000000},			/* 0.00000=f(0.00000)*/
-{11, 0,123,__LINE__, 0x3fed594f, 0xe0000000, 0x3ff921fb, 0x54442d18},			/* 0.91715=f(1.57079)*/
-{11, 0,123,__LINE__, 0x3fefe176, 0x00000000, 0x400921fb, 0x54442d18},			/* 0.99627=f(3.14159)*/
-{11, 0,123,__LINE__, 0x3feffead, 0x80000000, 0x4012d97c, 0x7f3321d2},			/* 0.99983=f(4.71238)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03e0000, 0x00000000},			/* -1.00000=f(-30.0000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* -1.00000=f(-28.3000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc03a9999, 0x9999999a},			/* -1.00000=f(-26.6000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc038e666, 0x66666667},			/* -1.00000=f(-24.9000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0373333, 0x33333334},			/* -1.00000=f(-23.2000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0358000, 0x00000001},			/* -1.00000=f(-21.5000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc033cccc, 0xccccccce},			/* -1.00000=f(-19.8000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0321999, 0x9999999b},			/* -1.00000=f(-18.1000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0306666, 0x66666668},			/* -1.00000=f(-16.4000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02d6666, 0x6666666a},			/* -1.00000=f(-14.7000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc02a0000, 0x00000004},			/* -1.00000=f(-13.0000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0269999, 0x9999999e},			/* -1.00000=f(-11.3000)*/
-{12, 0,123,__LINE__, 0xbff00000, 0x00000000, 0xc0233333, 0x33333338},			/* -1.00000=f(-9.60000)*/
-{11, 0,123,__LINE__, 0xbfefffff, 0x60000000, 0xc01f9999, 0x999999a3},			/* -0.99999=f(-7.90000)*/
-{11, 0,123,__LINE__, 0xbfefffee, 0xc0000000, 0xc018cccc, 0xccccccd6},			/* -0.99999=f(-6.20000)*/
-{11, 0,123,__LINE__, 0xbfeffdfa, 0x80000000, 0xc0120000, 0x00000009},			/* -0.99975=f(-4.50000)*/
-{11, 0,123,__LINE__, 0xbfefc3a3, 0x20000000, 0xc0066666, 0x66666678},			/* -0.99263=f(-2.80000)*/
-{11, 0,123,__LINE__, 0xbfe99db0, 0x20000000, 0xbff19999, 0x999999bd},			/* -0.80049=f(-1.10000)*/
-{14, 0,123,__LINE__, 0x3fe12f82, 0xa0000000, 0x3fe33333, 0x333332ec},			/* 0.53704=f(0.60000)*/
-{11, 0,123,__LINE__, 0x3fef5cf3, 0x20000000, 0x40026666, 0x66666654},			/* 0.98009=f(2.30000)*/
-{11, 0,123,__LINE__, 0x3feffa81, 0x80000000, 0x400fffff, 0xffffffee},			/* 0.99932=f(4.00000)*/
-{11, 0,123,__LINE__, 0x3fefffd1, 0x00000000, 0x4016cccc, 0xccccccc4},			/* 0.99997=f(5.70000)*/
-{11, 0,123,__LINE__, 0x3feffffe, 0x60000000, 0x401d9999, 0x99999991},			/* 0.99999=f(7.40000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40223333, 0x3333332f},			/* 1.00000=f(9.10000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40259999, 0x99999995},			/* 1.00000=f(10.8000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4028ffff, 0xfffffffb},			/* 1.00000=f(12.5000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402c6666, 0x66666661},			/* 1.00000=f(14.2000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x402fcccc, 0xccccccc7},			/* 1.00000=f(15.9000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40319999, 0x99999997},			/* 1.00000=f(17.6000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40334ccc, 0xccccccca},			/* 1.00000=f(19.3000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4034ffff, 0xfffffffd},			/* 1.00000=f(21.0000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x4036b333, 0x33333330},			/* 1.00000=f(22.7000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x40386666, 0x66666663},			/* 1.00000=f(24.4000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403a1999, 0x99999996},			/* 1.00000=f(26.1000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403bcccc, 0xccccccc9},			/* 1.00000=f(27.8000)*/
-{12, 0,123,__LINE__, 0x3ff00000, 0x00000000, 0x403d7fff, 0xfffffffc},			/* 1.00000=f(29.5000)*/
-0,};
-test_tanhf(m)   {run_vector_1(m,tanhf_vec,(char *)(tanhf),"tanhf","ff");   }	
diff --git a/newlib/libm/test/test.c b/newlib/libm/test/test.c
deleted file mode 100644
index 615c54aa5..000000000
--- a/newlib/libm/test/test.c
+++ /dev/null
@@ -1,291 +0,0 @@
-#include <signal.h>
-#include  "test.h"
-#include <math.h>
-#include <ieeefp.h>
-#include <string.h>
-int verbose;
-static int count;
-int inacc;
-
-
-int
-_DEFUN(main,(ac, av),
-       int ac _AND
-       char **av)
-{
-  int i;
-  int math2 = 1;
-  int string= 1;
-  int is = 1;
-  int math= 1;
-  int cvt = 1;
-  int ieee= 1;
-bt();
-  for (i = 1; i < ac; i++) 
-  {
-    if (strcmp(av[i],"-v")==0) 
-     verbose ++;
-    if (strcmp(av[i],"-nomath2") == 0)
-     math2 = 0;
-    if (strcmp(av[i],"-nostrin") == 0)
-     string= 0;
-    if (strcmp(av[i],"-nois") == 0)
-     is = 0;
-    if (strcmp(av[i],"-nomath") == 0)
-     math= 0;
-    if (strcmp(av[i],"-nocvt") == 0)
-     cvt = 0;
-    if (strcmp(av[i],"-noiee") == 0)
-     ieee= 0;
-  }
-  if (cvt)
-   test_cvt();
-  
-  if (math2)
-   test_math2();
-  if (string)
-   test_string();
-  if (math)
-   test_math();
-  if (is)
-   test_is();
-  if (ieee)  test_ieee();
-  printf("Tested %d functions, %d errors detected\n", count, inacc);
-  return 0;
-}
-
-
-static _CONST char *iname = "foo";
-void 
-_DEFUN(newfunc,(string),
-       _CONST char *string)
-{
-  if (strcmp(iname, string)) 
-  {
-    printf("testing %s\n", string);
-    fflush(stdout);
-    iname = string;
-  }
-  
-}
-
-
-static int theline;
-
-void line(li)
-int li;
-{
-  if (verbose)  
-  {
-    printf("  %d\n", li);
-  }
-  theline = li;
-  
-  count++;
-}
-
-
-
-int redo = 0;
-int reduce = 0;
-
-int strtod_vector = 0;
-
-int 
-_DEFUN(bigger,(a,b),
-	   __ieee_double_shape_type *a  _AND
-	   __ieee_double_shape_type *b)
-{
-
-  if (a->parts.msw > b->parts.msw) 
-    {
-
-      return 1;
-    } 
-  else if (a->parts.msw == b->parts.msw) 
-    {
-      if (a->parts.lsw > b->parts.lsw) 
-	{
-	  return 1;
-	}
-    }
-  return 0;
-}
-
-
-
-/* Return the first bit different between two double numbers */
-int 
-_DEFUN(mag_of_error,(is, shouldbe),
-       double is _AND
-       double shouldbe)
-{
-  __ieee_double_shape_type a,b;
-  int i;
-  int a_big;
-  unsigned  int mask;
-  unsigned long int __x;
-  unsigned long int msw, lsw;						  
-  a.value = is;
-  
-  b.value = shouldbe;
-  
-  if (a.parts.msw == b.parts.msw 
-      && a.parts.lsw== b.parts.lsw) return 64;
-
-
-  /* Subtract the larger from the smaller number */
-
-  a_big = bigger(&a, &b);
-
-  if (!a_big) {
-    int t;
-    t = a.parts.msw;
-    a.parts.msw = b.parts.msw;
-    b.parts.msw = t;
-
-    t = a.parts.lsw;
-    a.parts.lsw = b.parts.lsw;
-    b.parts.lsw = t;
-  }
-
-
-
-  __x = (a.parts.lsw) - (b.parts.lsw);							
-  msw = (a.parts.msw) - (b.parts.msw) - (__x > (a.parts.lsw));
-  lsw = __x;								
-
-  
-
-
-  /* Find out which bit the difference is in */
-  mask = 0x80000000;
-  for (i = 0; i < 32; i++)
-  {
-    if (((msw) & mask)!=0) return i;
-    mask >>=1;
-  }
-  
-  mask = 0x80000000;
-  for (i = 0; i < 32; i++)
-  {
-    
-    if (((lsw) & mask)!=0) return i+32;
-    mask >>=1;
-  }
-  
-  return 64;
-  
-}
-
- int ok_mag;
-
-
-
-void
-_DEFUN(test_sok,(is, shouldbe),
-       char *is _AND
-       char *shouldbe)
-{
-  if (strcmp(is,shouldbe))
-    {
-    printf("%s:%d, inacurate answer: (%s should be %s)\n",
-	   iname, 
-	   theline,
-	   is, shouldbe);
-    inacc++;
-  }
-}
-void
-_DEFUN(test_iok,(is, shouldbe),
-       int is _AND
-       int shouldbe)
-{
-  if (is != shouldbe){
-    printf("%s:%d, inacurate answer: (%08x should be %08x)\n",
-	   iname, 
-	   theline,
-	   is, shouldbe);
-    inacc++;
-  }
-}
-
-
-/* Compare counted strings upto a certain length - useful to test single
-   prec float conversions against double results
-*/
-void 
-_DEFUN(test_scok,(is, shouldbe, count),
-       char *is _AND
-       char *shouldbe _AND
-       int count)
-{
-  if (strncmp(is,shouldbe, count))
-    {
-    printf("%s:%d, inacurate answer: (%s should be %s)\n",
-	   iname, 
-	   theline,
-	   is, shouldbe);
-    inacc++;
-  }
-}
-
-void
-_DEFUN(test_eok,(is, shouldbe),
-       int is _AND
-       int shouldbe)
-{
-  if (is != shouldbe){
-    printf("%s:%d, bad errno answer: (%d should be %d)\n",
-	   iname, 
-	   theline,
-	   is, shouldbe);
-    inacc++;
-  }
-}
-
-void
-_DEFUN(test_mok,(value, shouldbe, okmag),
-       double value _AND
-       double shouldbe _AND
-       int okmag)
-{
-  __ieee_double_shape_type a,b;
-  int mag = mag_of_error(value, shouldbe);
-  if (mag == 0) 
-  {
-    /* error in the first bit is ok if the numbers are both 0 */
-    if (value == 0.0 && shouldbe == 0.0)
-     return;
-    
-  }
-  a.value = shouldbe;
-  b.value = value;
-  
-  if (mag < okmag) 
-  {
-    printf("%s:%d, wrong answer: bit %d ",
-	   iname, 
-	   theline,
-	   mag);
-     printf("%08x%08x %08x%08x) ",
-	    a.parts.msw,	     a.parts.lsw,
-	    b.parts.msw,	     b.parts.lsw);
-    printf("(%g %g)\n",   a.value, b.value);
-    inacc++;
-  }
-}
-
-#ifdef __PCCNECV70__
-kill() {}
-getpid() {}
-#endif
-
-bt(){
-
-  double f1,f2;
-  f1 = 0.0;
-  f2 = 0.0/f1;
-  printf("(%g)\n", f2);
-
-}
diff --git a/newlib/libm/test/test.h b/newlib/libm/test/test.h
deleted file mode 100644
index f58fcc96d..000000000
--- a/newlib/libm/test/test.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#define HAVE_FLOAT 1
-#define X(x) (char *)x
-
-#include <_ansi.h>
-#include <math.h>
-#include <float.h>
-#include <ieeefp.h>
-#include <stdio.h>
-
-void checkf();
-void enter();
-
-
-double translate_from();
-
-typedef struct 
-{
-  long msw, lsw;
-} question_struct_type;
-
-
-typedef struct 
-{
-  char error_bit;
-  char errno_val;
-  char merror;
-  int line;
-  
-  question_struct_type qs[3];
-} one_line_type;
-
-
-#define MVEC_START(x) one_line_type x[] =  {
-#define MVEC_END    0,};
-
-
-int _EXFUN(mag_of_error,(double, double));
-
-
-#define ERROR_PERFECT 20
-#define ERROR_FAIL -1
-
-#define AAAA 15
-#define AAA 10
-#define AA  6
-#define A   5
-#define B   3
-#define C   1 
-#define VECOPEN(x,f) \
-{\
-  char buffer[100];\
-   sprintf(buffer,"%s_vec.c",x);\
-    f = fopen(buffer,"w");\
-     fprintf(f,"#include \"test.h\"\n");\
-      fprintf(f," one_line_type %s_vec[] = {\n", x);\
-}
-
-#define VECCLOSE(f,name,args)\
-{\
-  fprintf(f,"0,};\n");      \
-   fprintf(f,"test_%s(m)   {run_vector_1(m,%s_vec,(char *)(%s),\"%s\",\"%s\");   }	\n",\
-	   name,\
-	   name,name,name,args);\
-	    fclose(f);\
-}
-
-
-
-typedef struct 
-{
-  int line;
-  
-  char *string;
-  double value;
-  int endscan;
-} double_type;
-
-
-typedef struct {
-  long int value;
-  char end;
-  char errno_val;
-} int_scan_type;
-
-typedef struct 
-{
-  int line;
-  int_scan_type octal;
-  int_scan_type decimal;
-  int_scan_type hex;
-  int_scan_type normal;
-  int_scan_type alphabetical;
-  char *string;
-} int_type;
-
-
-typedef struct 
-{
-  int line;
-  double value;
-  char *estring;
-  int e1;
-  int e2;
-  int e3;
-  char *fstring;
-  int f1;
-  int f2;
-  int f3;
-  char *gstring;
-  int g1;
-} ddouble_type;
-
-typedef struct
-{
-  int line;
-  double value;
-  char *result;
-  char *format_string;
-} sprint_double_type;
-
-
-typedef struct
-{
-  int line;
-  int value;
-  char *result;
-  char *format_string;
-} sprint_int_type;
-
-
-void _EXFUN(test_ieee,(void));
-void _EXFUN(test_math2,(void));
-void _EXFUN(test_math,(void));
-void _EXFUN(test_string,(void));
-void _EXFUN(test_is,(void));
-void _EXFUN(test_cvt,(void));
-
-void _EXFUN(line,(int));
-
-void _EXFUN(test_mok, (double, double, int));
-void _EXFUN(test_iok, (int, int));
-void _EXFUN(test_eok, (int, int));
-void _EXFUN(test_sok, (char *, char*));
-void _EXFUN(test_scok, (char *, char*, int));
-void _EXFUN(newfunc,(_CONST char *));
diff --git a/newlib/libm/test/test_ieee.c b/newlib/libm/test/test_ieee.c
deleted file mode 100644
index a126d01e6..000000000
--- a/newlib/libm/test/test_ieee.c
+++ /dev/null
@@ -1,180 +0,0 @@
-
-#include "test.h"
-#include <ieeefp.h>
-
-
-/* Test fp getround and fp setround */
-
-void
-_DEFUN_VOID(test_getround)
-{
-
-  newfunc("fpgetround/fpsetround");
-  line(1);
-  fpsetround(FP_RN);
-  test_iok(fpgetround(), FP_RN);
-  line(2);
-  fpsetround(FP_RM);
-  test_iok(fpgetround(), FP_RM);
-  line(3);  
-  fpsetround(FP_RP);
-  test_iok(fpgetround(), FP_RP);
-  line(4);  
-  fpsetround(FP_RZ);
-  test_iok(fpgetround(), FP_RZ);
-}
-
-/* And fpset/fpgetmask */
-void
-_DEFUN_VOID(test_getmask)
-{
-  newfunc("fpsetmask/fpgetmask");
-  line(1);
-  fpsetmask(FP_X_INV);
-  test_iok(fpgetmask(),FP_X_INV);
-  line(2);
-  fpsetmask(FP_X_DX);
-  test_iok(fpgetmask(),FP_X_DX);
-  line(3);
-  fpsetmask(FP_X_OFL );
-  test_iok(fpgetmask(),FP_X_OFL);
-  line(4);  
-  fpsetmask(FP_X_UFL);
-  test_iok(fpgetmask(),FP_X_UFL);
-  line(5);  
-  fpsetmask(FP_X_IMP);
-  test_iok(fpgetmask(),FP_X_IMP);
-}
-
-void
-_DEFUN_VOID(test_getsticky)
-{
-  newfunc("fpsetsticky/fpgetsticky");
-  line(1);
-  fpsetsticky(FP_X_INV);
-  test_iok(fpgetsticky(),FP_X_INV);
-  line(2);
-  fpsetsticky(FP_X_DX);
-  test_iok(fpgetsticky(),FP_X_DX);
-  line(3);
-  fpsetsticky(FP_X_OFL );
-  test_iok(fpgetsticky(),FP_X_OFL);
-  line(4);  
-  fpsetsticky(FP_X_UFL);
-  test_iok(fpgetsticky(),FP_X_UFL);
-  line(5);  
-  fpsetsticky(FP_X_IMP);
-  test_iok(fpgetsticky(),FP_X_IMP);
-}
-
-void
-_DEFUN_VOID(test_getroundtoi)
-{
-  newfunc("fpsetroundtoi/fpgetroundtoi");
-  line(1);
-  fpsetroundtoi(FP_RDI_TOZ);
-  test_iok(fpgetroundtoi(),FP_RDI_TOZ);
-
-  line(2);
-  fpsetroundtoi(FP_RDI_RD);
-  test_iok(fpgetroundtoi(),FP_RDI_RD);
-
-}
-
-double
- _DEFUN(dnumber,(msw, lsw),
-	int msw _AND
-	int lsw)
-{
-  
-  __ieee_double_shape_type v;
-  v.parts.lsw = lsw;
-  v.parts.msw = msw;
-  return v.value;
-}
-
-  /* Lets see if changing the rounding alters the arithmetic.
-     Test by creating numbers which will have to be rounded when
-     added, and seeing what happens to them */
- /* Keep them out here to stop  the compiler from folding the results */
-double n;
-double m;
-double add_rounded_up;
-double add_rounded_down;
-double sub_rounded_down ;
-double sub_rounded_up ;
-  double r1,r2,r3,r4;
-void
-_DEFUN_VOID(test_round)
-{
-  n =                dnumber(0x40000000, 0x00000008); /* near 2 */
-  m =                dnumber(0x40400000, 0x00000003); /* near 3.4 */
-  
-  add_rounded_up   = dnumber(0x40410000, 0x00000004); /* For RN, RP */
-  add_rounded_down = dnumber(0x40410000, 0x00000003); /* For RM, RZ */
-  sub_rounded_down = dnumber(0xc0410000, 0x00000004); /* for RN, RM */
-  sub_rounded_up   = dnumber(0xc0410000, 0x00000003); /* for RP, RZ */
-
-  newfunc("fpsetround");
-  
-  line(1);
-  
-  fpsetround(FP_RN);
-  r1 = n + m;
-  test_mok(r1, add_rounded_up, 64);
-  
-  line(2);
-  fpsetround(FP_RM);
-  r2 = n + m;
-  test_mok(r2, add_rounded_down, 64);
-  
-  fpsetround(FP_RP);
-  line(3);
-  r3 = n + m;
-  test_mok(r3,add_rounded_up, 64);
-  
-  fpsetround(FP_RZ);
-  line(4);
-  r4 = n + m;
-  test_mok(r4,add_rounded_down,64);
-
-
-  fpsetround(FP_RN);
-  r1 = - n - m;
-  line(5);
-  test_mok(r1,sub_rounded_down,64);
-  
-  fpsetround(FP_RM);
-  r2 = - n - m;
-  line(6);
-  test_mok(r2,sub_rounded_down,64);
-
-
-  fpsetround(FP_RP);
-  r3 = - n - m;
-  line(7);
-  test_mok(r3,sub_rounded_up,64);
-
-  fpsetround(FP_RZ);
-  r4 = - n - m;
-  line(8);
-  test_mok(r4,sub_rounded_up,64);
-}
-
-
-void
-_DEFUN_VOID(test_ieee)
-{
-  fp_rnd old = fpgetround();
-  test_getround();
-  test_getmask();
-  test_getsticky();
-  test_getroundtoi();
-
-  test_round();
-  fpsetround(old);
-
-  
-}
-
-
diff --git a/newlib/libm/test/test_is.c b/newlib/libm/test/test_is.c
deleted file mode 100644
index 2e99becbf..000000000
--- a/newlib/libm/test/test_is.c
+++ /dev/null
@@ -1,2031 +0,0 @@
-#include "test.h"
-#include <ctype.h>
-
-int setascii;
-int setlower;
-int setupper;
-int myascii;
-int mycntrl;
-int myspace;
-int myprint;
-int myalnum;
-int mydigit;
-int myxdigit;
-int myalpha;
-int myupper;
-int mylower;
-int mygraph;
-int mypunct;
-
-void
-_DEFUN(test_is_single,(i),
-       int i)
-{
-  setascii = 0;
-  setlower = 0;
-  setupper = 0;
-
-  myascii = 0;
-  mycntrl = 0;
-  myspace = 0;
-  myprint = 0;
-  myalnum = 0;
-  mydigit = 0;
-  myxdigit = 0;
-  myalpha = 0;
-  myupper = 0;
-  mylower = 0;
-  mygraph = 0;
-  mypunct = 0;
-
-  switch (i) {
-    case 0000:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 0;
-      setlower = 0;
-      setupper = 0;
-      break;
-    case 0001:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 1;
-      setlower = 1;
-      setupper = 1;
-      break;
-    case 0002:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 2;
-      setlower = 2;
-      setupper = 2;
-      break;
-    case 0003:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 3;
-      setlower = 3;
-      setupper = 3;
-      break;
-    case 0004:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 4;
-      setlower = 4;
-      setupper = 4;
-      break;
-    case 0005:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 5;
-      setlower = 5;
-      setupper = 5;
-      break;
-    case 0006:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 6;
-      setlower = 6;
-      setupper = 6;
-      break;
-    case 0007:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 7;
-      setlower = 7;
-      setupper = 7;
-      break;
-    case 0010:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 8;
-      setlower = 8;
-      setupper = 8;
-      break;
-    case 0011:
-      myascii = 1;
-      mycntrl = 1;
-      myspace = 1;
-      setascii = 9;
-      setlower = 9;
-      setupper = 9;
-      break;
-    case 0012:
-      myascii = 1;
-      mycntrl = 1;
-      myspace = 1;
-      setascii = 10;
-      setlower = 10;
-      setupper = 10;
-      break;
-    case 0013:
-      myascii = 1;
-      mycntrl = 1;
-      myspace = 1;
-      setascii = 11;
-      setlower = 11;
-      setupper = 11;
-      break;
-    case 0014:
-      myascii = 1;
-      mycntrl = 1;
-      myspace = 1;
-      setascii = 12;
-      setlower = 12;
-      setupper = 12;
-      break;
-    case 0015:
-      myascii = 1;
-      mycntrl = 1;
-      myspace = 1;
-      setascii = 13;
-      setlower = 13;
-      setupper = 13;
-      break;
-    case 0016:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 14;
-      setlower = 14;
-      setupper = 14;
-      break;
-    case 0017:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 15;
-      setlower = 15;
-      setupper = 15;
-      break;
-    case 0020:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 16;
-      setlower = 16;
-      setupper = 16;
-      break;
-    case 0021:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 17;
-      setlower = 17;
-      setupper = 17;
-      break;
-    case 0022:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 18;
-      setlower = 18;
-      setupper = 18;
-      break;
-    case 0023:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 19;
-      setlower = 19;
-      setupper = 19;
-      break;
-    case 0024:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 20;
-      setlower = 20;
-      setupper = 20;
-      break;
-    case 0025:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 21;
-      setlower = 21;
-      setupper = 21;
-      break;
-    case 0026:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 22;
-      setlower = 22;
-      setupper = 22;
-      break;
-    case 0027:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 23;
-      setlower = 23;
-      setupper = 23;
-      break;
-    case 0030:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 24;
-      setlower = 24;
-      setupper = 24;
-      break;
-    case 0031:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 25;
-      setlower = 25;
-      setupper = 25;
-      break;
-    case 0032:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 26;
-      setlower = 26;
-      setupper = 26;
-      break;
-    case 0033:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 27;
-      setlower = 27;
-      setupper = 27;
-      break;
-    case 0034:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 28;
-      setlower = 28;
-      setupper = 28;
-      break;
-    case 0035:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 29;
-      setlower = 29;
-      setupper = 29;
-      break;
-    case 0036:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 30;
-      setlower = 30;
-      setupper = 30;
-      break;
-    case 0037:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 31;
-      setlower = 31;
-      setupper = 31;
-      break;
-    case ' ':
-      myascii = 1;
-      myprint = 1;
-      myspace = 1;
-      setascii = 32;
-      setlower = 32;
-      setupper = 32;
-      break;
-    case '!':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 33;
-      setlower = 33;
-      setupper = 33;
-      break;
-    case '"':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 34;
-      setlower = 34;
-      setupper = 34;
-      break;
-    case '#':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 35;
-      setlower = 35;
-      setupper = 35;
-      break;
-    case '$':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 36;
-      setlower = 36;
-      setupper = 36;
-      break;
-    case '%':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 37;
-      setlower = 37;
-      setupper = 37;
-      break;
-    case '&':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 38;
-      setlower = 38;
-      setupper = 38;
-      break;
-    case '\'':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 39;
-      setlower = 39;
-      setupper = 39;
-      break;
-    case '\(':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 40;
-      setlower = 40;
-      setupper = 40;
-      break;
-    case ')':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 41;
-      setlower = 41;
-      setupper = 41;
-      break;
-    case '*':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 42;
-      setlower = 42;
-      setupper = 42;
-      break;
-    case '+':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 43;
-      setlower = 43;
-      setupper = 43;
-      break;
-    case ',':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 44;
-      setlower = 44;
-      setupper = 44;
-      break;
-    case '-':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 45;
-      setlower = 45;
-      setupper = 45;
-      break;
-    case '.':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 46;
-      setlower = 46;
-      setupper = 46;
-      break;
-    case '/':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 47;
-      setlower = 47;
-      setupper = 47;
-      break;
-    case '0':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 48;
-      setlower = 48;
-      setupper = 48;
-      break;
-    case '1':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 49;
-      setlower = 49;
-      setupper = 49;
-      break;
-    case '2':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 50;
-      setlower = 50;
-      setupper = 50;
-      break;
-    case '3':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 51;
-      setlower = 51;
-      setupper = 51;
-      break;
-    case '4':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 52;
-      setlower = 52;
-      setupper = 52;
-      break;
-    case '5':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 53;
-      setlower = 53;
-      setupper = 53;
-      break;
-    case '6':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 54;
-      setlower = 54;
-      setupper = 54;
-      break;
-    case '7':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 55;
-      setlower = 55;
-      setupper = 55;
-      break;
-    case '8':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 56;
-      setlower = 56;
-      setupper = 56;
-      break;
-    case '9':
-      myalnum = 1;
-      myascii = 1;
-      mydigit = 1;
-      mygraph = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 57;
-      setlower = 57;
-      setupper = 57;
-      break;
-    case ':':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 58;
-      setlower = 58;
-      setupper = 58;
-      break;
-    case ';':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 59;
-      setlower = 59;
-      setupper = 59;
-      break;
-    case '<':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 60;
-      setlower = 60;
-      setupper = 60;
-      break;
-    case '=':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 61;
-      setlower = 61;
-      setupper = 61;
-      break;
-    case '>':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 62;
-      setlower = 62;
-      setupper = 62;
-      break;
-    case '?':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 63;
-      setlower = 63;
-      setupper = 63;
-      break;
-    case '@':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 64;
-      setlower = 64;
-      setupper = 64;
-      break;
-    case 'A':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 65;
-      setlower = 97;
-      setupper = 65;
-      break;
-    case 'B':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 66;
-      setlower = 98;
-      setupper = 66;
-      break;
-    case 'C':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 67;
-      setlower = 99;
-      setupper = 67;
-      break;
-    case 'D':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 68;
-      setlower = 100;
-      setupper = 68;
-      break;
-    case 'E':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 69;
-      setlower = 101;
-      setupper = 69;
-      break;
-    case 'F':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      myxdigit = 1;
-      setascii = 70;
-      setlower = 102;
-      setupper = 70;
-      break;
-    case 'G':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 71;
-      setlower = 103;
-      setupper = 71;
-      break;
-    case 'H':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 72;
-      setlower = 104;
-      setupper = 72;
-      break;
-    case 'I':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 73;
-      setlower = 105;
-      setupper = 73;
-      break;
-    case 'J':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 74;
-      setlower = 106;
-      setupper = 74;
-      break;
-    case 'K':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 75;
-      setlower = 107;
-      setupper = 75;
-      break;
-    case 'L':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 76;
-      setlower = 108;
-      setupper = 76;
-      break;
-    case 'M':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 77;
-      setlower = 109;
-      setupper = 77;
-      break;
-    case 'N':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 78;
-      setlower = 110;
-      setupper = 78;
-      break;
-    case 'O':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 79;
-      setlower = 111;
-      setupper = 79;
-      break;
-    case 'P':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 80;
-      setlower = 112;
-      setupper = 80;
-      break;
-    case 'Q':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 81;
-      setlower = 113;
-      setupper = 81;
-      break;
-    case 'R':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 82;
-      setlower = 114;
-      setupper = 82;
-      break;
-    case 'S':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 83;
-      setlower = 115;
-      setupper = 83;
-      break;
-    case 'T':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 84;
-      setlower = 116;
-      setupper = 84;
-      break;
-    case 'U':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 85;
-      setlower = 117;
-      setupper = 85;
-      break;
-    case 'V':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 86;
-      setlower = 118;
-      setupper = 86;
-      break;
-    case 'W':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 87;
-      setlower = 119;
-      setupper = 87;
-      break;
-    case 'X':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 88;
-      setlower = 120;
-      setupper = 88;
-      break;
-    case 'Y':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 89;
-      setlower = 121;
-      setupper = 89;
-      break;
-    case 'Z':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      myupper = 1;
-      setascii = 90;
-      setlower = 122;
-      setupper = 90;
-      break;
-    case '[':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 91;
-      setlower = 91;
-      setupper = 91;
-      break;
-    case '\\':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 92;
-      setlower = 92;
-      setupper = 92;
-      break;
-    case ']':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 93;
-      setlower = 93;
-      setupper = 93;
-      break;
-    case '^':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 94;
-      setlower = 94;
-      setupper = 94;
-      break;
-    case '_':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 95;
-      setlower = 95;
-      setupper = 95;
-      break;
-    case '`':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 96;
-      setlower = 96;
-      setupper = 96;
-      break;
-    case 'a':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 97;
-      setlower = 97;
-      setupper = 65;
-      break;
-    case 'b':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 98;
-      setlower = 98;
-      setupper = 66;
-      break;
-    case 'c':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 99;
-      setlower = 99;
-      setupper = 67;
-      break;
-    case 'd':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 100;
-      setlower = 100;
-      setupper = 68;
-      break;
-    case 'e':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 101;
-      setlower = 101;
-      setupper = 69;
-      break;
-    case 'f':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      myxdigit = 1;
-      setascii = 102;
-      setlower = 102;
-      setupper = 70;
-      break;
-    case 'g':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 103;
-      setlower = 103;
-      setupper = 71;
-      break;
-    case 'h':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 104;
-      setlower = 104;
-      setupper = 72;
-      break;
-    case 'i':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 105;
-      setlower = 105;
-      setupper = 73;
-      break;
-    case 'j':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 106;
-      setlower = 106;
-      setupper = 74;
-      break;
-    case 'k':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 107;
-      setlower = 107;
-      setupper = 75;
-      break;
-    case 'l':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 108;
-      setlower = 108;
-      setupper = 76;
-      break;
-    case 'm':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 109;
-      setlower = 109;
-      setupper = 77;
-      break;
-    case 'n':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 110;
-      setlower = 110;
-      setupper = 78;
-      break;
-    case 'o':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 111;
-      setlower = 111;
-      setupper = 79;
-      break;
-    case 'p':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 112;
-      setlower = 112;
-      setupper = 80;
-      break;
-    case 'q':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 113;
-      setlower = 113;
-      setupper = 81;
-      break;
-    case 'r':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 114;
-      setlower = 114;
-      setupper = 82;
-      break;
-    case 's':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 115;
-      setlower = 115;
-      setupper = 83;
-      break;
-    case 't':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 116;
-      setlower = 116;
-      setupper = 84;
-      break;
-    case 'u':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 117;
-      setlower = 117;
-      setupper = 85;
-      break;
-    case 'v':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 118;
-      setlower = 118;
-      setupper = 86;
-      break;
-    case 'w':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 119;
-      setlower = 119;
-      setupper = 87;
-      break;
-    case 'x':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 120;
-      setlower = 120;
-      setupper = 88;
-      break;
-    case 'y':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 121;
-      setlower = 121;
-      setupper = 89;
-      break;
-    case 'z':
-      myalnum = 1;
-      myalpha = 1;
-      myascii = 1;
-      mygraph = 1;
-      mylower = 1;
-      myprint = 1;
-      setascii = 122;
-      setlower = 122;
-      setupper = 90;
-      break;
-    case '{':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 123;
-      setlower = 123;
-      setupper = 123;
-      break;
-    case '|':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 124;
-      setlower = 124;
-      setupper = 124;
-      break;
-    case '}':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 125;
-      setlower = 125;
-      setupper = 125;
-      break;
-    case '~':
-      myascii = 1;
-      mygraph = 1;
-      myprint = 1;
-      mypunct = 1;
-      setascii = 126;
-      setlower = 126;
-      setupper = 126;
-      break;
-    case 0177:
-      myascii = 1;
-      mycntrl = 1;
-      setascii = 127;
-      setlower = 127;
-      setupper = 127;
-      break;
-    case 0200:
-      setascii = 0;
-      setlower = 128;
-      setupper = 128;
-      break;
-    case 0201:
-      setascii = 1;
-      setlower = 129;
-      setupper = 129;
-      break;
-    case 0202:
-      setascii = 2;
-      setlower = 130;
-      setupper = 130;
-      break;
-    case 0203:
-      setascii = 3;
-      setlower = 131;
-      setupper = 131;
-      break;
-    case 0204:
-      setascii = 4;
-      setlower = 132;
-      setupper = 132;
-      break;
-    case 0205:
-      setascii = 5;
-      setlower = 133;
-      setupper = 133;
-      break;
-    case 0206:
-      setascii = 6;
-      setlower = 134;
-      setupper = 134;
-      break;
-    case 0207:
-      setascii = 7;
-      setlower = 135;
-      setupper = 135;
-      break;
-    case 0210:
-      setascii = 8;
-      setlower = 136;
-      setupper = 136;
-      break;
-    case 0211:
-      setascii = 9;
-      setlower = 137;
-      setupper = 137;
-      break;
-    case 0212:
-      setascii = 10;
-      setlower = 138;
-      setupper = 138;
-      break;
-    case 0213:
-      setascii = 11;
-      setlower = 139;
-      setupper = 139;
-      break;
-    case 0214:
-      setascii = 12;
-      setlower = 140;
-      setupper = 140;
-      break;
-    case 0215:
-      setascii = 13;
-      setlower = 141;
-      setupper = 141;
-      break;
-    case 0216:
-      setascii = 14;
-      setlower = 142;
-      setupper = 142;
-      break;
-    case 0217:
-      setascii = 15;
-      setlower = 143;
-      setupper = 143;
-      break;
-    case 0220:
-      setascii = 16;
-      setlower = 144;
-      setupper = 144;
-      break;
-    case 0221:
-      setascii = 17;
-      setlower = 145;
-      setupper = 145;
-      break;
-    case 0222:
-      setascii = 18;
-      setlower = 146;
-      setupper = 146;
-      break;
-    case 0223:
-      setascii = 19;
-      setlower = 147;
-      setupper = 147;
-      break;
-    case 0224:
-      setascii = 20;
-      setlower = 148;
-      setupper = 148;
-      break;
-    case 0225:
-      setascii = 21;
-      setlower = 149;
-      setupper = 149;
-      break;
-    case 0226:
-      setascii = 22;
-      setlower = 150;
-      setupper = 150;
-      break;
-    case 0227:
-      setascii = 23;
-      setlower = 151;
-      setupper = 151;
-      break;
-    case 0230:
-      setascii = 24;
-      setlower = 152;
-      setupper = 152;
-      break;
-    case 0231:
-      setascii = 25;
-      setlower = 153;
-      setupper = 153;
-      break;
-    case 0232:
-      setascii = 26;
-      setlower = 154;
-      setupper = 154;
-      break;
-    case 0233:
-      setascii = 27;
-      setlower = 155;
-      setupper = 155;
-      break;
-    case 0234:
-      setascii = 28;
-      setlower = 156;
-      setupper = 156;
-      break;
-    case 0235:
-      setascii = 29;
-      setlower = 157;
-      setupper = 157;
-      break;
-    case 0236:
-      setascii = 30;
-      setlower = 158;
-      setupper = 158;
-      break;
-    case 0237:
-      setascii = 31;
-      setlower = 159;
-      setupper = 159;
-      break;
-    case 0240:
-      setascii = 32;
-      setlower = 160;
-      setupper = 160;
-      break;
-    case 0241:
-      setascii = 33;
-      setlower = 161;
-      setupper = 161;
-      break;
-    case 0242:
-      setascii = 34;
-      setlower = 162;
-      setupper = 162;
-      break;
-    case 0243:
-      setascii = 35;
-      setlower = 163;
-      setupper = 163;
-      break;
-    case 0244:
-      setascii = 36;
-      setlower = 164;
-      setupper = 164;
-      break;
-    case 0245:
-      setascii = 37;
-      setlower = 165;
-      setupper = 165;
-      break;
-    case 0246:
-      setascii = 38;
-      setlower = 166;
-      setupper = 166;
-      break;
-    case 0247:
-      setascii = 39;
-      setlower = 167;
-      setupper = 167;
-      break;
-    case 0250:
-      setascii = 40;
-      setlower = 168;
-      setupper = 168;
-      break;
-    case 0251:
-      setascii = 41;
-      setlower = 169;
-      setupper = 169;
-      break;
-    case 0252:
-      setascii = 42;
-      setlower = 170;
-      setupper = 170;
-      break;
-    case 0253:
-      setascii = 43;
-      setlower = 171;
-      setupper = 171;
-      break;
-    case 0254:
-      setascii = 44;
-      setlower = 172;
-      setupper = 172;
-      break;
-    case 0255:
-      setascii = 45;
-      setlower = 173;
-      setupper = 173;
-      break;
-    case 0256:
-      setascii = 46;
-      setlower = 174;
-      setupper = 174;
-      break;
-    case 0257:
-      setascii = 47;
-      setlower = 175;
-      setupper = 175;
-      break;
-    case 0260:
-      setascii = 48;
-      setlower = 176;
-      setupper = 176;
-      break;
-    case 0261:
-      setascii = 49;
-      setlower = 177;
-      setupper = 177;
-      break;
-    case 0262:
-      setascii = 50;
-      setlower = 178;
-      setupper = 178;
-      break;
-    case 0263:
-      setascii = 51;
-      setlower = 179;
-      setupper = 179;
-      break;
-    case 0264:
-      setascii = 52;
-      setlower = 180;
-      setupper = 180;
-      break;
-    case 0265:
-      setascii = 53;
-      setlower = 181;
-      setupper = 181;
-      break;
-    case 0266:
-      setascii = 54;
-      setlower = 182;
-      setupper = 182;
-      break;
-    case 0267:
-      setascii = 55;
-      setlower = 183;
-      setupper = 183;
-      break;
-    case 0270:
-      setascii = 56;
-      setlower = 184;
-      setupper = 184;
-      break;
-    case 0271:
-      setascii = 57;
-      setlower = 185;
-      setupper = 185;
-      break;
-    case 0272:
-      setascii = 58;
-      setlower = 186;
-      setupper = 186;
-      break;
-    case 0273:
-      setascii = 59;
-      setlower = 187;
-      setupper = 187;
-      break;
-    case 0274:
-      setascii = 60;
-      setlower = 188;
-      setupper = 188;
-      break;
-    case 0275:
-      setascii = 61;
-      setlower = 189;
-      setupper = 189;
-      break;
-    case 0276:
-      setascii = 62;
-      setlower = 190;
-      setupper = 190;
-      break;
-    case 0277:
-      setascii = 63;
-      setlower = 191;
-      setupper = 191;
-      break;
-    case 0300:
-      setascii = 64;
-      setlower = 192;
-      setupper = 192;
-      break;
-    case 0301:
-      setascii = 65;
-      setlower = 193;
-      setupper = 193;
-      break;
-    case 0302:
-      setascii = 66;
-      setlower = 194;
-      setupper = 194;
-      break;
-    case 0303:
-      setascii = 67;
-      setlower = 195;
-      setupper = 195;
-      break;
-    case 0304:
-      setascii = 68;
-      setlower = 196;
-      setupper = 196;
-      break;
-    case 0305:
-      setascii = 69;
-      setlower = 197;
-      setupper = 197;
-      break;
-    case 0306:
-      setascii = 70;
-      setlower = 198;
-      setupper = 198;
-      break;
-    case 0307:
-      setascii = 71;
-      setlower = 199;
-      setupper = 199;
-      break;
-    case 0310:
-      setascii = 72;
-      setlower = 200;
-      setupper = 200;
-      break;
-    case 0311:
-      setascii = 73;
-      setlower = 201;
-      setupper = 201;
-      break;
-    case 0312:
-      setascii = 74;
-      setlower = 202;
-      setupper = 202;
-      break;
-    case 0313:
-      setascii = 75;
-      setlower = 203;
-      setupper = 203;
-      break;
-    case 0314:
-      setascii = 76;
-      setlower = 204;
-      setupper = 204;
-      break;
-    case 0315:
-      setascii = 77;
-      setlower = 205;
-      setupper = 205;
-      break;
-    case 0316:
-      setascii = 78;
-      setlower = 206;
-      setupper = 206;
-      break;
-    case 0317:
-      setascii = 79;
-      setlower = 207;
-      setupper = 207;
-      break;
-    case 0320:
-      setascii = 80;
-      setlower = 208;
-      setupper = 208;
-      break;
-    case 0321:
-      setascii = 81;
-      setlower = 209;
-      setupper = 209;
-      break;
-    case 0322:
-      setascii = 82;
-      setlower = 210;
-      setupper = 210;
-      break;
-    case 0323:
-      setascii = 83;
-      setlower = 211;
-      setupper = 211;
-      break;
-    case 0324:
-      setascii = 84;
-      setlower = 212;
-      setupper = 212;
-      break;
-    case 0325:
-      setascii = 85;
-      setlower = 213;
-      setupper = 213;
-      break;
-    case 0326:
-      setascii = 86;
-      setlower = 214;
-      setupper = 214;
-      break;
-    case 0327:
-      setascii = 87;
-      setlower = 215;
-      setupper = 215;
-      break;
-    case 0330:
-      setascii = 88;
-      setlower = 216;
-      setupper = 216;
-      break;
-    case 0331:
-      setascii = 89;
-      setlower = 217;
-      setupper = 217;
-      break;
-    case 0332:
-      setascii = 90;
-      setlower = 218;
-      setupper = 218;
-      break;
-    case 0333:
-      setascii = 91;
-      setlower = 219;
-      setupper = 219;
-      break;
-    case 0334:
-      setascii = 92;
-      setlower = 220;
-      setupper = 220;
-      break;
-    case 0335:
-      setascii = 93;
-      setlower = 221;
-      setupper = 221;
-      break;
-    case 0336:
-      setascii = 94;
-      setlower = 222;
-      setupper = 222;
-      break;
-    case 0337:
-      setascii = 95;
-      setlower = 223;
-      setupper = 223;
-      break;
-    case 0340:
-      setascii = 96;
-      setlower = 224;
-      setupper = 224;
-      break;
-    case 0341:
-      setascii = 97;
-      setlower = 225;
-      setupper = 225;
-      break;
-    case 0342:
-      setascii = 98;
-      setlower = 226;
-      setupper = 226;
-      break;
-    case 0343:
-      setascii = 99;
-      setlower = 227;
-      setupper = 227;
-      break;
-    case 0344:
-      setascii = 100;
-      setlower = 228;
-      setupper = 228;
-      break;
-    case 0345:
-      setascii = 101;
-      setlower = 229;
-      setupper = 229;
-      break;
-    case 0346:
-      setascii = 102;
-      setlower = 230;
-      setupper = 230;
-      break;
-    case 0347:
-      setascii = 103;
-      setlower = 231;
-      setupper = 231;
-      break;
-    case 0350:
-      setascii = 104;
-      setlower = 232;
-      setupper = 232;
-      break;
-    case 0351:
-      setascii = 105;
-      setlower = 233;
-      setupper = 233;
-      break;
-    case 0352:
-      setascii = 106;
-      setlower = 234;
-      setupper = 234;
-      break;
-    case 0353:
-      setascii = 107;
-      setlower = 235;
-      setupper = 235;
-      break;
-    case 0354:
-      setascii = 108;
-      setlower = 236;
-      setupper = 236;
-      break;
-    case 0355:
-      setascii = 109;
-      setlower = 237;
-      setupper = 237;
-      break;
-    case 0356:
-      setascii = 110;
-      setlower = 238;
-      setupper = 238;
-      break;
-    case 0357:
-      setascii = 111;
-      setlower = 239;
-      setupper = 239;
-      break;
-    case 0360:
-      setascii = 112;
-      setlower = 240;
-      setupper = 240;
-      break;
-    case 0361:
-      setascii = 113;
-      setlower = 241;
-      setupper = 241;
-      break;
-    case 0362:
-      setascii = 114;
-      setlower = 242;
-      setupper = 242;
-      break;
-    case 0363:
-      setascii = 115;
-      setlower = 243;
-      setupper = 243;
-      break;
-    case 0364:
-      setascii = 116;
-      setlower = 244;
-      setupper = 244;
-      break;
-    case 0365:
-      setascii = 117;
-      setlower = 245;
-      setupper = 245;
-      break;
-    case 0366:
-      setascii = 118;
-      setlower = 246;
-      setupper = 246;
-      break;
-    case 0367:
-      setascii = 119;
-      setlower = 247;
-      setupper = 247;
-      break;
-    case 0370:
-      setascii = 120;
-      setlower = 248;
-      setupper = 248;
-      break;
-    case 0371:
-      setascii = 121;
-      setlower = 249;
-      setupper = 249;
-      break;
-    case 0372:
-      setascii = 122;
-      setlower = 250;
-      setupper = 250;
-      break;
-    case 0373:
-      setascii = 123;
-      setlower = 251;
-      setupper = 251;
-      break;
-    case 0374:
-      setascii = 124;
-      setlower = 252;
-      setupper = 252;
-      break;
-    case 0375:
-      setascii = 125;
-      setlower = 253;
-      setupper = 253;
-      break;
-    case 0376:
-      setascii = 126;
-      setlower = 254;
-      setupper = 254;
-      break;
-    case 0377:
-      setascii = 127;
-      setlower = 255;
-      setupper = 255;
-      break;
-    default:
-      abort();
-      
-    }
-
-}
-
-
-int _DEFUN(def_isascii,(i), int i) { return isascii(i); }
-int _DEFUN(def_iscntrl,(i), int i) { return iscntrl(i); }
-int _DEFUN(def_isspace,(i), int i) { return isspace(i); }
-int _DEFUN(def_isprint,(i), int i) { return isprint(i); }
-int _DEFUN(def_isalnum,(i), int i) { return isalnum(i); }
-int _DEFUN(def_isdigit,(i), int i) { return isdigit(i); }
-int _DEFUN(def_isxdigit,(i), int i) { return isxdigit(i); }
-int _DEFUN(def_isalpha,(i), int i) { return isalpha(i); }
-int _DEFUN(def_isupper,(i), int i) { return isupper(i); }
-int _DEFUN(def_islower,(i), int i) { return islower(i); }
-int _DEFUN(def_isgraph,(i), int i) { return isgraph(i); }
-int _DEFUN(def_ispunct,(i), int i) { return ispunct(i); }
-int _DEFUN(def_tolower,(i), int i) { return tolower(i); }
-int _DEFUN(def_toupper,(i), int i) { return toupper(i); }
-int _DEFUN(def_toascii,(i), int i) { return toascii(i); }
-int _DEFUN(def__tolower,(i), int i) { return _tolower(i); }
-int _DEFUN(def__toupper,(i), int i) { return _toupper(i); }
-
-extern int inacc;
-void
-_DEFUN(test_is_set,(func, name, p),
-       int (*func)() _AND
-       char *name _AND
-       int *p)
-{
-  int i;
-  newfunc(name);
-  for (i = 0; i < 255; i++) {
-    int r = func(i) != 0;
-    line(i);
-    test_is_single(i);
-    if (*p  != r) 
-      {
-	printf("%s:%d wrong result, is %d shouldbe %d\n", name, i, r,*p);
-	inacc++;
-      }
-  }
-}
-void
-_DEFUN(test_to_set,(func, name, p, low, high),
-       int (*func)() _AND
-       char *name _AND
-       int *p _AND
-       int low _AND
-       int high)
-{
-  int i;
-  newfunc(name);
-  for (i = low; i <= high; i++) {
-    int r = func(i) ;
-    line(i);
-    test_is_single(i);
-    if (*p  != r) 
-      {
-	printf("%s:%d wrong result, is %d shouldbe %d\n", name, i, r,*p);
-	inacc++;
-      }
-  }
-}
-
-
-#undef isascii
-#undef iscntrl
-#undef isspace
-#undef isprint
-#undef isalnum
-#undef isdigit
-#undef isxdigit
-#undef isalpha
-#undef isupper
-#undef islower
-#undef isgraph
-#undef ispunct
-#undef tolower
-#undef toupper
-#undef toascii
-#undef _tolower
-#undef _toupper
-
-void
-_DEFUN_VOID(test_is)
-{
-  test_is_set(def_isalnum, "isalnum define", &myalnum);
-  test_is_set(def_isalpha, "isalpha define", &myalpha);
-  test_is_set(def_isascii, "isascii define", &myascii);
-  test_is_set(def_iscntrl, "iscntrl define", &mycntrl);
-  test_is_set(def_isdigit, "isdigit define", &mydigit);
-  test_is_set(def_isgraph, "isgraph define", &mygraph);
-  test_is_set(def_islower, "islower define", &mylower);
-  test_is_set(def_isprint, "isprint define", &myprint);
-  test_is_set(def_ispunct, "ispunct define", &mypunct);
-  test_is_set(def_isspace, "isspace define", &myspace);
-  test_is_set(def_isupper, "isupper define", &myupper);
-  test_is_set(def_isxdigit, "isxdigit define", &myxdigit);
-  test_is_set(isalnum, "isalnum function", &myalnum);
-  test_is_set(isalpha, "isalpha function", &myalpha);
-  test_is_set(isascii, "isascii function", &myascii);
-  test_is_set(iscntrl, "iscntrl function", &mycntrl);
-  test_is_set(isgraph, "isgraph function", &mygraph);
-  test_is_set(islower, "islower function", &mylower);
-  test_is_set(isprint, "isprint function", &myprint);
-  test_is_set(ispunct, "ispunct function", &mypunct);
-  test_is_set(isspace, "isspace function", &myspace);
-  test_is_set(isupper, "isupper function", &myupper);
-  test_is_set(isxdigit, "isxdigit function", &myxdigit);
-  test_to_set(_tolower, "_tolower function", &setlower, 'A','Z');
-  test_to_set(_toupper, "_toupper function", &setupper, 'a','z');
-  test_to_set(def__tolower, "_tolower define", &setlower, 'A','Z');
-  test_to_set(def__toupper, "_toupper define", &setupper, 'a','z');
-  test_to_set(def_toascii, "toascii define", &setascii, 0,255);
-  test_to_set(def_tolower, "tolower define", &setlower, 0,255);
-  test_to_set(def_toupper, "toupper define", &setupper, 0,255);
-  test_to_set(toascii, "toascii function", &setascii, 0,255);
-  test_to_set(tolower, "tolower function", &setlower, 0,255);
-  test_to_set(toupper, "toupper function", &setupper, 0,255);
-}
diff --git a/newlib/libm/test/y0_vec.c b/newlib/libm/test/y0_vec.c
deleted file mode 100644
index 9fae15418..000000000
--- a/newlib/libm/test/y0_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type y0_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0xc03613fa, 0xd0072757, 0x3cd19000, 0x00000000},			/* -22.0780=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0xc0080b2c, 0x5336d29e, 0x3f847ae1, 0x47ae16ad},			/* -3.00545=f(0.01000)*/
-{64, 0,123,__LINE__, 0xc00482fb, 0x0dc4d2d8, 0x3f947ae1, 0x47ae1594},			/* -2.56395=f(0.02000)*/
-{64, 0,123,__LINE__, 0xc00271a2, 0xcda61095, 0x3f9eb851, 0xeb851fd2},			/* -2.30548=f(0.03000)*/
-{64, 0,123,__LINE__, 0xc000f9a7, 0x00acda15, 0x3fa47ae1, 0x47ae1508},			/* -2.12190=f(0.04000)*/
-{64, 0,123,__LINE__, 0xbfffab42, 0x0311f75e, 0x3fa99999, 0x99999a27},			/* -1.97931=f(0.05000)*/
-{64, 0,123,__LINE__, 0xbffdcd51, 0x596ca896, 0x3faeb851, 0xeb851f46},			/* -1.86262=f(0.06000)*/
-{64, 0,123,__LINE__, 0xbffc3885, 0x010279bd, 0x3fb1eb85, 0x1eb85232},			/* -1.76379=f(0.07000)*/
-{64, 0,123,__LINE__, 0xbffad931, 0x2cb8fd00, 0x3fb47ae1, 0x47ae14c1},			/* -1.67802=f(0.08000)*/
-{64, 0,123,__LINE__, 0xbff9a2a6, 0xd440e8ee, 0x3fb70a3d, 0x70a3d750},			/* -1.60221=f(0.09000)*/
-{64, 0,123,__LINE__, 0xbff88c3d, 0xd3fcf172, 0x3fb99999, 0x999999df},			/* -1.53423=f(0.10000)*/
-{64, 0,123,__LINE__, 0xbff78fca, 0x39b900f4, 0x3fbc28f5, 0xc28f5c6e},			/* -1.47260=f(0.11000)*/
-{64, 0,123,__LINE__, 0xbff6a8be, 0x0dfec480, 0x3fbeb851, 0xeb851efd},			/* -1.41619=f(0.12000)*/
-{64, 0,123,__LINE__, 0xbff5d3a4, 0x60c3d140, 0x3fc0a3d7, 0x0a3d70c6},			/* -1.36417=f(0.13000)*/
-{64, 0,123,__LINE__, 0xbff50dcd, 0xc13e44cf, 0x3fc1eb85, 0x1eb8520e},			/* -1.31587=f(0.14000)*/
-{64, 0,123,__LINE__, 0xbff45519, 0x9a9aa235, 0x3fc33333, 0x33333356},			/* -1.27077=f(0.15000)*/
-{64, 0,123,__LINE__, 0xbff3a7d1, 0x3d22b9d9, 0x3fc47ae1, 0x47ae149e},			/* -1.22847=f(0.16000)*/
-{64, 0,123,__LINE__, 0xbff3048e, 0x21fbf0fd, 0x3fc5c28f, 0x5c28f5e6},			/* -1.18861=f(0.17000)*/
-{64, 0,123,__LINE__, 0xbff26a27, 0x8d77c68f, 0x3fc70a3d, 0x70a3d72e},			/* -1.15091=f(0.18000)*/
-{64, 0,123,__LINE__, 0xbff1d7a5, 0x2abcff8e, 0x3fc851eb, 0x851eb876},			/* -1.11514=f(0.19000)*/
-{64, 0,123,__LINE__, 0xbff14c35, 0x1831ea87, 0x3fc99999, 0x999999be},			/* -1.08110=f(0.20000)*/
-{64, 0,123,__LINE__, 0xbff0c724, 0x62650605, 0x3fcae147, 0xae147b06},			/* -1.04861=f(0.21000)*/
-{64, 0,123,__LINE__, 0xbff047d9, 0x3f6f6495, 0x3fcc28f5, 0xc28f5c4e},			/* -1.01754=f(0.22000)*/
-{64, 0,123,__LINE__, 0xbfef9b9d, 0x260f32c2, 0x3fcd70a3, 0xd70a3d96},			/* -0.98774=f(0.23000)*/
-{64, 0,123,__LINE__, 0xbfeeb120, 0xce71adbb, 0x3fceb851, 0xeb851ede},			/* -0.95912=f(0.24000)*/
-{64, 0,123,__LINE__, 0xbfedcf72, 0x3b7d21da, 0x3fd00000, 0x00000013},			/* -0.93157=f(0.25000)*/
-{63, 0,123,__LINE__, 0xbfecf5de, 0x5d066c27, 0x3fd0a3d7, 0x0a3d70b7},			/* -0.90501=f(0.26000)*/
-{64, 0,123,__LINE__, 0xbfec23c6, 0xa684d2d6, 0x3fd147ae, 0x147ae15b},			/* -0.87936=f(0.27000)*/
-{64, 0,123,__LINE__, 0xbfeb589e, 0x10edc97e, 0x3fd1eb85, 0x1eb851ff},			/* -0.85456=f(0.28000)*/
-{64, 0,123,__LINE__, 0xbfea93e6, 0xa3324d2a, 0x3fd28f5c, 0x28f5c2a3},			/* -0.83055=f(0.29000)*/
-{61, 0,123,__LINE__, 0xbfe9d52f, 0x65f30ccc, 0x3fd33333, 0x33333347},			/* -0.80727=f(0.30000)*/
-{64, 0,123,__LINE__, 0xbfe91c12, 0xad4d3d82, 0x3fd3d70a, 0x3d70a3eb},			/* -0.78467=f(0.31000)*/
-{64, 0,123,__LINE__, 0xbfe86834, 0xa854a417, 0x3fd47ae1, 0x47ae148f},			/* -0.76272=f(0.32000)*/
-{64, 0,123,__LINE__, 0xbfe7b942, 0x2959afbe, 0x3fd51eb8, 0x51eb8533},			/* -0.74136=f(0.33000)*/
-{64, 0,123,__LINE__, 0xbfe70eef, 0x9ccc2e23, 0x3fd5c28f, 0x5c28f5d7},			/* -0.72057=f(0.34000)*/
-{64, 0,123,__LINE__, 0xbfe668f8, 0x269cb97a, 0x3fd66666, 0x6666667b},			/* -0.70031=f(0.35000)*/
-{64, 0,123,__LINE__, 0xbfe5c71c, 0xdf9924d4, 0x3fd70a3d, 0x70a3d71f},			/* -0.68055=f(0.36000)*/
-{64, 0,123,__LINE__, 0xbfe52924, 0x2d8054ea, 0x3fd7ae14, 0x7ae147c3},			/* -0.66127=f(0.37000)*/
-{64, 0,123,__LINE__, 0xbfe48ed9, 0x3185c09e, 0x3fd851eb, 0x851eb867},			/* -0.64243=f(0.38000)*/
-{64, 0,123,__LINE__, 0xbfe3f80b, 0x49c44373, 0x3fd8f5c2, 0x8f5c290b},			/* -0.62402=f(0.39000)*/
-{64, 0,123,__LINE__, 0xbfe3648d, 0xa2beeda8, 0x3fd99999, 0x999999af},			/* -0.60602=f(0.40000)*/
-{64, 0,123,__LINE__, 0xbfe2d436, 0xd68e0fe9, 0x3fda3d70, 0xa3d70a53},			/* -0.58840=f(0.41000)*/
-{63, 0,123,__LINE__, 0xbfe246e0, 0x97bdb58b, 0x3fdae147, 0xae147af7},			/* -0.57115=f(0.42000)*/
-{63, 0,123,__LINE__, 0xbfe1bc67, 0x66365027, 0x3fdb851e, 0xb851eb9b},			/* -0.55424=f(0.43000)*/
-{64, 0,123,__LINE__, 0xbfe134aa, 0x4ccc8542, 0x3fdc28f5, 0xc28f5c3f},			/* -0.53767=f(0.44000)*/
-{63, 0,123,__LINE__, 0xbfe0af8a, 0xa64cf89e, 0x3fdccccc, 0xcccccce3},			/* -0.52142=f(0.45000)*/
-{64, 0,123,__LINE__, 0xbfe02ceb, 0xe907006b, 0x3fdd70a3, 0xd70a3d87},			/* -0.50548=f(0.46000)*/
-{61, 0,123,__LINE__, 0xbfdf5966, 0xeffea91b, 0x3fde147a, 0xe147ae2b},			/* -0.48983=f(0.47000)*/
-{64, 0,123,__LINE__, 0xbfde5d90, 0xf2270065, 0x3fdeb851, 0xeb851ecf},			/* -0.47446=f(0.48000)*/
-{64, 0,123,__LINE__, 0xbfdd6627, 0x5ee2acd4, 0x3fdf5c28, 0xf5c28f73},			/* -0.45935=f(0.49000)*/
-{64, 0,123,__LINE__, 0xbfdc72fe, 0xb3b7b883, 0x3fe00000, 0x0000000b},			/* -0.44451=f(0.50000)*/
-{61, 0,123,__LINE__, 0xbfdb83ee, 0x28938e2b, 0x3fe051eb, 0x851eb85d},			/* -0.42992=f(0.51000)*/
-{64, 0,123,__LINE__, 0xbfda98cf, 0x78f2e6a7, 0x3fe0a3d7, 0x0a3d70af},			/* -0.41557=f(0.52000)*/
-{64, 0,123,__LINE__, 0xbfd9b17e, 0xb2472a4b, 0x3fe0f5c2, 0x8f5c2901},			/* -0.40145=f(0.53000)*/
-{63, 0,123,__LINE__, 0xbfd8cdda, 0x0702844f, 0x3fe147ae, 0x147ae153},			/* -0.38756=f(0.54000)*/
-{64, 0,123,__LINE__, 0xbfd7edc1, 0xa5c749e1, 0x3fe19999, 0x999999a5},			/* -0.37388=f(0.55000)*/
-{64, 0,123,__LINE__, 0xbfd71117, 0x9447ee75, 0x3fe1eb85, 0x1eb851f7},			/* -0.36041=f(0.56000)*/
-{64, 0,123,__LINE__, 0xbfd637bf, 0x8d72fc1c, 0x3fe23d70, 0xa3d70a49},			/* -0.34715=f(0.57000)*/
-{64, 0,123,__LINE__, 0xbfd5619e, 0xe292c8ed, 0x3fe28f5c, 0x28f5c29b},			/* -0.33408=f(0.58000)*/
-{62, 0,123,__LINE__, 0xbfd48e9c, 0x5f133676, 0x3fe2e147, 0xae147aed},			/* -0.32120=f(0.59000)*/
-{64, 0,123,__LINE__, 0xbfd3bea0, 0x2ea8f036, 0x3fe33333, 0x3333333f},			/* -0.30850=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbfd2f193, 0xc59d8f6f, 0x3fe3851e, 0xb851eb91},			/* -0.29599=f(0.61000)*/
-{60, 0,123,__LINE__, 0xbfd22761, 0xcb0af398, 0x3fe3d70a, 0x3d70a3e3},			/* -0.28365=f(0.62000)*/
-{64, 0,123,__LINE__, 0xbfd15ff6, 0x04d6244b, 0x3fe428f5, 0xc28f5c35},			/* -0.27148=f(0.63000)*/
-{64, 0,123,__LINE__, 0xbfd09b3d, 0x453f55ca, 0x3fe47ae1, 0x47ae1487},			/* -0.25947=f(0.64000)*/
-{63, 0,123,__LINE__, 0xbfcfb24a, 0xb3c2891b, 0x3fe4cccc, 0xccccccd9},			/* -0.24762=f(0.65000)*/
-{60, 0,123,__LINE__, 0xbfce3339, 0xf7fc5219, 0x3fe51eb8, 0x51eb852b},			/* -0.23593=f(0.66000)*/
-{64, 0,123,__LINE__, 0xbfccb927, 0x83f826c9, 0x3fe570a3, 0xd70a3d7d},			/* -0.22440=f(0.67000)*/
-{61, 0,123,__LINE__, 0xbfcb43f4, 0x23eb43f4, 0x3fe5c28f, 0x5c28f5cf},			/* -0.21301=f(0.68000)*/
-{64, 0,123,__LINE__, 0xbfc9d382, 0x2a8d95b6, 0x3fe6147a, 0xe147ae21},			/* -0.20176=f(0.69000)*/
-{63, 0,123,__LINE__, 0xbfc867b5, 0x59ffc6db, 0x3fe66666, 0x66666673},			/* -0.19066=f(0.70000)*/
-{56, 0,123,__LINE__, 0xbfc70072, 0xce567b80, 0x3fe6b851, 0xeb851ec5},			/* -0.17970=f(0.71000)*/
-{63, 0,123,__LINE__, 0xbfc59da0, 0xe9a74147, 0x3fe70a3d, 0x70a3d717},			/* -0.16887=f(0.72000)*/
-{63, 0,123,__LINE__, 0xbfc43f27, 0x41772e25, 0x3fe75c28, 0xf5c28f69},			/* -0.15817=f(0.73000)*/
-{63, 0,123,__LINE__, 0xbfc2e4ee, 0x8d6e34f7, 0x3fe7ae14, 0x7ae147bb},			/* -0.14761=f(0.74000)*/
-{63, 0,123,__LINE__, 0xbfc18ee0, 0x9734f206, 0x3fe80000, 0x0000000d},			/* -0.13717=f(0.75000)*/
-{63, 0,123,__LINE__, 0xbfc03ce8, 0x2b6521ad, 0x3fe851eb, 0x851eb85f},			/* -0.12685=f(0.76000)*/
-{61, 0,123,__LINE__, 0xbfbddde2, 0x16ee44c4, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.11666=f(0.77000)*/
-{63, 0,123,__LINE__, 0xbfbb49cf, 0xc131b14f, 0x3fe8f5c2, 0x8f5c2903},			/* -0.10659=f(0.78000)*/
-{62, 0,123,__LINE__, 0xbfb8bd74, 0x5eb81ab8, 0x3fe947ae, 0x147ae155},			/* -0.09664=f(0.79000)*/
-{61, 0,123,__LINE__, 0xbfb638ac, 0x9857e6d4, 0x3fe99999, 0x999999a7},			/* -0.08680=f(0.80000)*/
-{60, 0,123,__LINE__, 0xbfb3bb56, 0xa0f5dce9, 0x3fe9eb85, 0x1eb851f9},			/* -0.07707=f(0.81000)*/
-{59, 0,123,__LINE__, 0xbfb14552, 0x2135f8f0, 0x3fea3d70, 0xa3d70a4b},			/* -0.06746=f(0.82000)*/
-{61, 0,123,__LINE__, 0xbfadad00, 0x48d1344d, 0x3fea8f5c, 0x28f5c29d},			/* -0.05796=f(0.83000)*/
-{58, 0,123,__LINE__, 0xbfa8dd86, 0x0d3a74e4, 0x3feae147, 0xae147aef},			/* -0.04856=f(0.84000)*/
-{61, 0,123,__LINE__, 0xbfa41bfc, 0xc78b837e, 0x3feb3333, 0x33333341},			/* -0.03927=f(0.85000)*/
-{59, 0,123,__LINE__, 0xbf9ed05c, 0x1f5d00d4, 0x3feb851e, 0xb851eb93},			/* -0.03009=f(0.86000)*/
-{57, 0,123,__LINE__, 0xbf9583cb, 0x7f59a6c6, 0x3febd70a, 0x3d70a3e5},			/* -0.02101=f(0.87000)*/
-{57, 0,123,__LINE__, 0xbf88a3c7, 0x5dfcb6c0, 0x3fec28f5, 0xc28f5c37},			/* -0.01203=f(0.88000)*/
-{55, 0,123,__LINE__, 0xbf69d226, 0x276b5330, 0x3fec7ae1, 0x47ae1489},			/* -0.00315=f(0.89000)*/
-{57, 0,123,__LINE__, 0x3f770db5, 0x0ee194b8, 0x3feccccc, 0xccccccdb},			/* 0.00562=f(0.90000)*/
-{59, 0,123,__LINE__, 0x3f8d4f15, 0x757ba360, 0x3fed1eb8, 0x51eb852d},			/* 0.01431=f(0.91000)*/
-{60, 0,123,__LINE__, 0x3f977268, 0x67a99a82, 0x3fed70a3, 0xd70a3d7f},			/* 0.02289=f(0.92000)*/
-{61, 0,123,__LINE__, 0x3fa0122b, 0xda106701, 0x3fedc28f, 0x5c28f5d1},			/* 0.03138=f(0.93000)*/
-{57, 0,123,__LINE__, 0x3fa45ed3, 0x6a0180b8, 0x3fee147a, 0xe147ae23},			/* 0.03978=f(0.94000)*/
-{60, 0,123,__LINE__, 0x3fa89f50, 0x75b2c684, 0x3fee6666, 0x66666675},			/* 0.04809=f(0.95000)*/
-{60, 0,123,__LINE__, 0x3facd3c7, 0x19481690, 0x3feeb851, 0xeb851ec7},			/* 0.05630=f(0.96000)*/
-{62, 0,123,__LINE__, 0x3fb07e2d, 0x0606b9d8, 0x3fef0a3d, 0x70a3d719},			/* 0.06442=f(0.97000)*/
-{61, 0,123,__LINE__, 0x3fb28c95, 0x5852b1f3, 0x3fef5c28, 0xf5c28f6b},			/* 0.07245=f(0.98000)*/
-{61, 0,123,__LINE__, 0x3fb4952c, 0x92323b12, 0x3fefae14, 0x7ae147bd},			/* 0.08040=f(0.99000)*/
-{60, 0,123,__LINE__, 0x3fb69802, 0x26f35936, 0x3ff00000, 0x00000007},			/* 0.08825=f(1.00000)*/
-{61, 0,123,__LINE__, 0x3fb89524, 0xf5756983, 0x3ff028f5, 0xc28f5c30},			/* 0.09602=f(1.01000)*/
-{61, 0,123,__LINE__, 0x3fba8ca3, 0x4ebf2953, 0x3ff051eb, 0x851eb859},			/* 0.10370=f(1.02000)*/
-{55, 0,123,__LINE__, 0x3fbc7e8a, 0xfc424cfc, 0x3ff07ae1, 0x47ae1482},			/* 0.11130=f(1.03000)*/
-{60, 0,123,__LINE__, 0x3fbe6ae9, 0x45d171b7, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.11881=f(1.04000)*/
-{60, 0,123,__LINE__, 0x3fc028e5, 0x7ba671d5, 0x3ff0cccc, 0xccccccd4},			/* 0.12624=f(1.05000)*/
-{62, 0,123,__LINE__, 0x3fc1199e, 0x33053259, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.13359=f(1.06000)*/
-{55, 0,123,__LINE__, 0x3fc207a4, 0xbafdecfe, 0x3ff11eb8, 0x51eb8526},			/* 0.14085=f(1.07000)*/
-{61, 0,123,__LINE__, 0x3fc2f2fe, 0xcf4c4293, 0x3ff147ae, 0x147ae14f},			/* 0.14804=f(1.08000)*/
-{61, 0,123,__LINE__, 0x3fc3dbb1, 0xf7c61890, 0x3ff170a3, 0xd70a3d78},			/* 0.15514=f(1.09000)*/
-{62, 0,123,__LINE__, 0x3fc4c1c3, 0x8a97c191, 0x3ff19999, 0x999999a1},			/* 0.16216=f(1.10000)*/
-{61, 0,123,__LINE__, 0x3fc5a538, 0xae6635da, 0x3ff1c28f, 0x5c28f5ca},			/* 0.16910=f(1.11000)*/
-{62, 0,123,__LINE__, 0x3fc68616, 0x5c58c204, 0x3ff1eb85, 0x1eb851f3},			/* 0.17596=f(1.12000)*/
-{62, 0,123,__LINE__, 0x3fc76461, 0x620b7b60, 0x3ff2147a, 0xe147ae1c},			/* 0.18275=f(1.13000)*/
-{60, 0,123,__LINE__, 0x3fc8401e, 0x636bb4c6, 0x3ff23d70, 0xa3d70a45},			/* 0.18945=f(1.14000)*/
-{61, 0,123,__LINE__, 0x3fc91951, 0xdc7f9b60, 0x3ff26666, 0x6666666e},			/* 0.19608=f(1.15000)*/
-{59, 0,123,__LINE__, 0x3fc9f000, 0x231a10ce, 0x3ff28f5c, 0x28f5c297},			/* 0.20263=f(1.16000)*/
-{60, 0,123,__LINE__, 0x3fcac42d, 0x687bc737, 0x3ff2b851, 0xeb851ec0},			/* 0.20911=f(1.17000)*/
-{61, 0,123,__LINE__, 0x3fcb95dd, 0xbae29481, 0x3ff2e147, 0xae147ae9},			/* 0.21551=f(1.18000)*/
-{61, 0,123,__LINE__, 0x3fcc6515, 0x0707e2ea, 0x3ff30a3d, 0x70a3d712},			/* 0.22183=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{57, 0,123,__LINE__, 0x3fda3d7f, 0xedadd03e, 0x3ff921fb, 0x54442d18},			/* 0.41000=f(1.57079)*/
-{59, 0,123,__LINE__, 0x3fd503f4, 0x1f0be448, 0x400921fb, 0x54442d18},			/* 0.32836=f(3.14159)*/
-{57, 0,123,__LINE__, 0xbfd02737, 0x6bc5f94c, 0x4012d97c, 0x7f3321d2},			/* -0.25239=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbfd3bea0, 0x2ea8f107, 0x3fe33333, 0x333332ec},			/* -0.30850=f(0.60000)*/
-{62, 0,123,__LINE__, 0x3fe09412, 0xda725e0d, 0x40026666, 0x66666654},			/* 0.51807=f(2.30000)*/
-{53, 0,123,__LINE__, 0xbf9158e9, 0xc57c1cb0, 0x400fffff, 0xffffffee},			/* -0.01694=f(4.00000)*/
-{56, 0,123,__LINE__, 0xbfd50086, 0xceea16be, 0x4016cccc, 0xccccccc4},			/* -0.32815=f(5.70000)*/
-{52, 0,123,__LINE__, 0x3fb736dc, 0xb6bee4f8, 0x401d9999, 0x99999991},			/* 0.09068=f(7.40000)*/
-{58, 0,123,__LINE__, 0x3fce81cb, 0x35aa7ce0, 0x40223333, 0x3333332f},			/* 0.23833=f(9.10000)*/
-{63, 0,123,__LINE__, 0xbfc0fa4b, 0x699333e5, 0x40259999, 0x99999995},			/* -0.13263=f(10.8000)*/
-{62, 0,123,__LINE__, 0xbfc5ea59, 0xb440a95d, 0x4028ffff, 0xfffffffb},			/* -0.17121=f(12.5000)*/
-{64, 0,123,__LINE__, 0x3fc42a56, 0xd5029d97, 0x402c6666, 0x66666661},			/* 0.15754=f(14.2000)*/
-{62, 0,123,__LINE__, 0x3fbcf7b9, 0x4cdab6a4, 0x402fcccc, 0xccccccc7},			/* 0.11315=f(15.9000)*/
-{64, 0,123,__LINE__, 0xbfc5afb0, 0xfa559fa9, 0x40319999, 0x99999997},			/* -0.16942=f(17.6000)*/
-{63, 0,123,__LINE__, 0xbfaf2149, 0x60705433, 0x40334ccc, 0xccccccca},			/* -0.06080=f(19.3000)*/
-{64, 0,123,__LINE__, 0x3fc5c92b, 0xd5128a73, 0x4034ffff, 0xfffffffd},			/* 0.17020=f(21.0000)*/
-{64, 0,123,__LINE__, 0x3f8c1ae3, 0xf0289190, 0x4036b333, 0x33333330},			/* 0.01372=f(22.7000)*/
-{62, 0,123,__LINE__, 0xbfc4a662, 0x4701d3a0, 0x40386666, 0x66666663},			/* -0.16132=f(24.4000)*/
-{64, 0,123,__LINE__, 0x3f9c2b29, 0x4eeab90c, 0x403a1999, 0x99999996},			/* 0.02750=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3fc2771c, 0x9fef6e9f, 0x403bcccc, 0xccccccc9},			/* 0.14426=f(27.8000)*/
-{64, 0,123,__LINE__, 0xbfafc3a0, 0x56b6c32f, 0x403d7fff, 0xfffffffc},			/* -0.06203=f(29.5000)*/
-0,};
-test_y0(m)   {run_vector_1(m,y0_vec,(char *)(y0),"y0","dd");   }	
diff --git a/newlib/libm/test/y0f_vec.c b/newlib/libm/test/y0f_vec.c
deleted file mode 100644
index 5567a9f30..000000000
--- a/newlib/libm/test/y0f_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type y0f_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 0, 0,123,__LINE__, 0xc03613fa, 0xd0157475, 0x3cd19000, 0x00000000},			/* -22.0780=f(9.74915e-16)*/
-{12, 0,123,__LINE__, 0xc0080b2c, 0x65e8bb34, 0x3f847ae1, 0x47ae16ad},			/* -3.00545=f(0.01000)*/
-{14, 0,123,__LINE__, 0xc00482fb, 0x167ab8af, 0x3f947ae1, 0x47ae1594},			/* -2.56395=f(0.02000)*/
-{13, 0,123,__LINE__, 0xc00271a2, 0xce956552, 0x3f9eb851, 0xeb851fd2},			/* -2.30548=f(0.03000)*/
-{13, 0,123,__LINE__, 0xc000f9a6, 0xfbe14c40, 0x3fa47ae1, 0x47ae1508},			/* -2.12190=f(0.04000)*/
-{ 1, 0,123,__LINE__, 0xbfffab41, 0xdcf836ee, 0x3fa99999, 0x99999a27},			/* -1.97931=f(0.05000)*/
-{ 1, 0,123,__LINE__, 0xbffdcd51, 0x5f1e597e, 0x3faeb851, 0xeb851f46},			/* -1.86262=f(0.06000)*/
-{ 1, 0,123,__LINE__, 0xbffc3884, 0xecdfd9cb, 0x3fb1eb85, 0x1eb85232},			/* -1.76379=f(0.07000)*/
-{ 1, 0,123,__LINE__, 0xbffad931, 0x2e8c3a35, 0x3fb47ae1, 0x47ae14c1},			/* -1.67802=f(0.08000)*/
-{ 1, 0,123,__LINE__, 0xbff9a2a6, 0xcfb3e479, 0x3fb70a3d, 0x70a3d750},			/* -1.60221=f(0.09000)*/
-{ 1, 0,123,__LINE__, 0xbff88c3d, 0xc5e474db, 0x3fb99999, 0x999999df},			/* -1.53423=f(0.10000)*/
-{ 1, 0,123,__LINE__, 0xbff78fca, 0x3c65350b, 0x3fbc28f5, 0xc28f5c6e},			/* -1.47260=f(0.11000)*/
-{ 1, 0,123,__LINE__, 0xbff6a8be, 0x16428fd9, 0x3fbeb851, 0xeb851efd},			/* -1.41619=f(0.12000)*/
-{ 1, 0,123,__LINE__, 0xbff5d3a4, 0x54935731, 0x3fc0a3d7, 0x0a3d70c6},			/* -1.36417=f(0.13000)*/
-{ 1, 0,123,__LINE__, 0xbff50dcd, 0xd05dfb44, 0x3fc1eb85, 0x1eb8520e},			/* -1.31587=f(0.14000)*/
-{ 1, 0,123,__LINE__, 0xbff45519, 0x98afe6d4, 0x3fc33333, 0x33333356},			/* -1.27077=f(0.15000)*/
-{ 1, 0,123,__LINE__, 0xbff3a7d1, 0x55b910ee, 0x3fc47ae1, 0x47ae149e},			/* -1.22847=f(0.16000)*/
-{ 1, 0,123,__LINE__, 0xbff3048e, 0x25cc1c2c, 0x3fc5c28f, 0x5c28f5e6},			/* -1.18861=f(0.17000)*/
-{ 1, 0,123,__LINE__, 0xbff26a27, 0x8b1b9c1b, 0x3fc70a3d, 0x70a3d72e},			/* -1.15091=f(0.18000)*/
-{ 1, 0,123,__LINE__, 0xbff1d7a5, 0x382033ee, 0x3fc851eb, 0x851eb876},			/* -1.11514=f(0.19000)*/
-{ 1, 0,123,__LINE__, 0xbff14c35, 0x16c60be0, 0x3fc99999, 0x999999be},			/* -1.08110=f(0.20000)*/
-{ 1, 0,123,__LINE__, 0xbff0c724, 0x6a313a78, 0x3fcae147, 0xae147b06},			/* -1.04861=f(0.21000)*/
-{ 1, 0,123,__LINE__, 0xbff047d9, 0x39f4244d, 0x3fcc28f5, 0xc28f5c4e},			/* -1.01754=f(0.22000)*/
-{ 1, 0,123,__LINE__, 0xbfef9b9c, 0xffb1d19b, 0x3fcd70a3, 0xd70a3d96},			/* -0.98774=f(0.23000)*/
-{ 1, 0,123,__LINE__, 0xbfeeb120, 0xda8652cd, 0x3fceb851, 0xeb851ede},			/* -0.95912=f(0.24000)*/
-{ 1, 0,123,__LINE__, 0xbfedcf72, 0x39b988fd, 0x3fd00000, 0x00000013},			/* -0.93157=f(0.25000)*/
-{ 1, 0,123,__LINE__, 0xbfecf5de, 0x75169083, 0x3fd0a3d7, 0x0a3d70b7},			/* -0.90501=f(0.26000)*/
-{ 1, 0,123,__LINE__, 0xbfec23c6, 0x9cb0682c, 0x3fd147ae, 0x147ae15b},			/* -0.87936=f(0.27000)*/
-{ 1, 0,123,__LINE__, 0xbfeb589e, 0x1c5ad1cd, 0x3fd1eb85, 0x1eb851ff},			/* -0.85456=f(0.28000)*/
-{ 1, 0,123,__LINE__, 0xbfea93e6, 0xa7bacb6e, 0x3fd28f5c, 0x28f5c2a3},			/* -0.83055=f(0.29000)*/
-{ 1, 0,123,__LINE__, 0xbfe9d52f, 0x4aeef861, 0x3fd33333, 0x33333347},			/* -0.80727=f(0.30000)*/
-{ 1, 0,123,__LINE__, 0xbfe91c12, 0xa8fc5906, 0x3fd3d70a, 0x3d70a3eb},			/* -0.78467=f(0.31000)*/
-{ 1, 0,123,__LINE__, 0xbfe86834, 0xbeb85d56, 0x3fd47ae1, 0x47ae148f},			/* -0.76272=f(0.32000)*/
-{ 1, 0,123,__LINE__, 0xbfe7b942, 0x24ff37a0, 0x3fd51eb8, 0x51eb8533},			/* -0.74136=f(0.33000)*/
-{ 1, 0,123,__LINE__, 0xbfe70eef, 0xae91a21e, 0x3fd5c28f, 0x5c28f5d7},			/* -0.72057=f(0.34000)*/
-{ 1, 0,123,__LINE__, 0xbfe668f8, 0x3374bc4e, 0x3fd66666, 0x6666667b},			/* -0.70031=f(0.35000)*/
-{ 1, 0,123,__LINE__, 0xbfe5c71c, 0xe323fcc2, 0x3fd70a3d, 0x70a3d71f},			/* -0.68055=f(0.36000)*/
-{ 1, 0,123,__LINE__, 0xbfe52924, 0x31ec0a44, 0x3fd7ae14, 0x7ae147c3},			/* -0.66127=f(0.37000)*/
-{ 1, 0,123,__LINE__, 0xbfe48ed9, 0x46cd6f38, 0x3fd851eb, 0x851eb867},			/* -0.64243=f(0.38000)*/
-{ 1, 0,123,__LINE__, 0xbfe3f80b, 0x5b891d2e, 0x3fd8f5c2, 0x8f5c290b},			/* -0.62402=f(0.39000)*/
-{ 1, 0,123,__LINE__, 0xbfe3648d, 0x9d654db1, 0x3fd99999, 0x999999af},			/* -0.60602=f(0.40000)*/
-{ 1, 0,123,__LINE__, 0xbfe2d436, 0xd605ba53, 0x3fda3d70, 0xa3d70a53},			/* -0.58840=f(0.41000)*/
-{ 1, 0,123,__LINE__, 0xbfe246e0, 0xad0f08fe, 0x3fdae147, 0xae147af7},			/* -0.57115=f(0.42000)*/
-{ 1, 0,123,__LINE__, 0xbfe1bc67, 0x6ab3f013, 0x3fdb851e, 0xb851eb9b},			/* -0.55424=f(0.43000)*/
-{ 1, 0,123,__LINE__, 0xbfe134aa, 0x5b7abac2, 0x3fdc28f5, 0xc28f5c3f},			/* -0.53767=f(0.44000)*/
-{ 1, 0,123,__LINE__, 0xbfe0af8a, 0xacc5d2a3, 0x3fdccccc, 0xcccccce3},			/* -0.52142=f(0.45000)*/
-{ 1, 0,123,__LINE__, 0xbfe02ceb, 0xdabc796e, 0x3fdd70a3, 0xd70a3d87},			/* -0.50548=f(0.46000)*/
-{ 1, 0,123,__LINE__, 0xbfdf5966, 0xfb706944, 0x3fde147a, 0xe147ae2b},			/* -0.48983=f(0.47000)*/
-{ 1, 0,123,__LINE__, 0xbfde5d90, 0xfa976950, 0x3fdeb851, 0xeb851ecf},			/* -0.47446=f(0.48000)*/
-{ 1, 0,123,__LINE__, 0xbfdd6627, 0x330d2f69, 0x3fdf5c28, 0xf5c28f73},			/* -0.45935=f(0.49000)*/
-{ 1, 0,123,__LINE__, 0xbfdc72fe, 0xbcda76e8, 0x3fe00000, 0x0000000b},			/* -0.44451=f(0.50000)*/
-{ 1, 0,123,__LINE__, 0xbfdb83ee, 0x39c42d37, 0x3fe051eb, 0x851eb85d},			/* -0.42992=f(0.51000)*/
-{ 1, 0,123,__LINE__, 0xbfda98cf, 0xa0a76beb, 0x3fe0a3d7, 0x0a3d70af},			/* -0.41557=f(0.52000)*/
-{ 1, 0,123,__LINE__, 0xbfd9b17e, 0xdbcbce9f, 0x3fe0f5c2, 0x8f5c2901},			/* -0.40145=f(0.53000)*/
-{ 1, 0,123,__LINE__, 0xbfd8cdd9, 0xca3b07a2, 0x3fe147ae, 0x147ae153},			/* -0.38756=f(0.54000)*/
-{ 1, 0,123,__LINE__, 0xbfd7edc1, 0x92d90b99, 0x3fe19999, 0x999999a5},			/* -0.37388=f(0.55000)*/
-{ 1, 0,123,__LINE__, 0xbfd71117, 0x7f6f4770, 0x3fe1eb85, 0x1eb851f7},			/* -0.36041=f(0.56000)*/
-{ 1, 0,123,__LINE__, 0xbfd637bf, 0x94556efa, 0x3fe23d70, 0xa3d70a49},			/* -0.34715=f(0.57000)*/
-{ 1, 0,123,__LINE__, 0xbfd5619e, 0xf7009734, 0x3fe28f5c, 0x28f5c29b},			/* -0.33408=f(0.58000)*/
-{ 1, 0,123,__LINE__, 0xbfd48e9c, 0x74637e22, 0x3fe2e147, 0xae147aed},			/* -0.32120=f(0.59000)*/
-{ 1, 0,123,__LINE__, 0xbfd3bea0, 0x1c4bb77b, 0x3fe33333, 0x3333333f},			/* -0.30850=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0xbfd2f193, 0xab2ec86d, 0x3fe3851e, 0xb851eb91},			/* -0.29599=f(0.61000)*/
-{ 1, 0,123,__LINE__, 0xbfd22761, 0xc7dae699, 0x3fe3d70a, 0x3d70a3e3},			/* -0.28365=f(0.62000)*/
-{ 1, 0,123,__LINE__, 0xbfd15ff6, 0x04a7b8ea, 0x3fe428f5, 0xc28f5c35},			/* -0.27148=f(0.63000)*/
-{ 1, 0,123,__LINE__, 0xbfd09b3d, 0x66cfa891, 0x3fe47ae1, 0x47ae1487},			/* -0.25947=f(0.64000)*/
-{ 1, 0,123,__LINE__, 0xbfcfb24a, 0xd545e2c6, 0x3fe4cccc, 0xccccccd9},			/* -0.24762=f(0.65000)*/
-{ 1, 0,123,__LINE__, 0xbfce3339, 0xb888fa56, 0x3fe51eb8, 0x51eb852b},			/* -0.23593=f(0.66000)*/
-{ 1, 0,123,__LINE__, 0xbfccb927, 0x83ce8bbe, 0x3fe570a3, 0xd70a3d7d},			/* -0.22440=f(0.67000)*/
-{ 1, 0,123,__LINE__, 0xbfcb43f4, 0x168cfe7b, 0x3fe5c28f, 0x5c28f5cf},			/* -0.21301=f(0.68000)*/
-{ 1, 0,123,__LINE__, 0xbfc9d382, 0x45775c64, 0x3fe6147a, 0xe147ae21},			/* -0.20176=f(0.69000)*/
-{ 1, 0,123,__LINE__, 0xbfc867b5, 0x7c5223ab, 0x3fe66666, 0x66666673},			/* -0.19066=f(0.70000)*/
-{ 1, 0,123,__LINE__, 0xbfc70072, 0xd8203bf4, 0x3fe6b851, 0xeb851ec5},			/* -0.17970=f(0.71000)*/
-{ 1, 0,123,__LINE__, 0xbfc59da0, 0xa42a12f8, 0x3fe70a3d, 0x70a3d717},			/* -0.16887=f(0.72000)*/
-{ 1, 0,123,__LINE__, 0xbfc43f27, 0x334406c5, 0x3fe75c28, 0xf5c28f69},			/* -0.15817=f(0.73000)*/
-{ 1, 0,123,__LINE__, 0xbfc2e4ee, 0x82ff6855, 0x3fe7ae14, 0x7ae147bb},			/* -0.14761=f(0.74000)*/
-{ 1, 0,123,__LINE__, 0xbfc18ee0, 0x8f1c8aa5, 0x3fe80000, 0x0000000d},			/* -0.13717=f(0.75000)*/
-{ 1, 0,123,__LINE__, 0xbfc03ce8, 0x49291398, 0x3fe851eb, 0x851eb85f},			/* -0.12685=f(0.76000)*/
-{ 1, 0,123,__LINE__, 0xbfbddde2, 0x6b84be91, 0x3fe8a3d7, 0x0a3d70b1},			/* -0.11666=f(0.77000)*/
-{ 1, 0,123,__LINE__, 0xbfbb49d0, 0x84bdd24e, 0x3fe8f5c2, 0x8f5c2903},			/* -0.10659=f(0.78000)*/
-{ 1, 0,123,__LINE__, 0xbfb8bd74, 0x4bdc54de, 0x3fe947ae, 0x147ae155},			/* -0.09664=f(0.79000)*/
-{ 1, 0,123,__LINE__, 0xbfb638ac, 0x4e447aff, 0x3fe99999, 0x999999a7},			/* -0.08680=f(0.80000)*/
-{ 1, 0,123,__LINE__, 0xbfb3bb56, 0xca102bc6, 0x3fe9eb85, 0x1eb851f9},			/* -0.07707=f(0.81000)*/
-{ 1, 0,123,__LINE__, 0xbfb14552, 0x512e5b8e, 0x3fea3d70, 0xa3d70a4b},			/* -0.06746=f(0.82000)*/
-{ 1, 0,123,__LINE__, 0xbfadad00, 0xc5026e27, 0x3fea8f5c, 0x28f5c29d},			/* -0.05796=f(0.83000)*/
-{ 1, 0,123,__LINE__, 0xbfa8dd87, 0x12800ea9, 0x3feae147, 0xae147aef},			/* -0.04856=f(0.84000)*/
-{ 1, 0,123,__LINE__, 0xbfa41bfc, 0x1f1aae90, 0x3feb3333, 0x33333341},			/* -0.03927=f(0.85000)*/
-{ 1, 0,123,__LINE__, 0xbf9ed05b, 0x719fc568, 0x3feb851e, 0xb851eb93},			/* -0.03009=f(0.86000)*/
-{ 1, 0,123,__LINE__, 0xbf9583cb, 0x4ba407dc, 0x3febd70a, 0x3d70a3e5},			/* -0.02101=f(0.87000)*/
-{ 1, 0,123,__LINE__, 0xbf88a3c5, 0xc52aaf88, 0x3fec28f5, 0xc28f5c37},			/* -0.01203=f(0.88000)*/
-{ 1, 0,123,__LINE__, 0xbf69d22b, 0x911b2280, 0x3fec7ae1, 0x47ae1489},			/* -0.00315=f(0.89000)*/
-{ 0, 0,123,__LINE__, 0x3f770daf, 0x6101c668, 0x3feccccc, 0xccccccdb},			/* 0.00562=f(0.90000)*/
-{ 0, 0,123,__LINE__, 0x3f8d4f18, 0x0c831594, 0x3fed1eb8, 0x51eb852d},			/* 0.01431=f(0.91000)*/
-{ 0, 0,123,__LINE__, 0x3f977269, 0x03a31ca4, 0x3fed70a3, 0xd70a3d7f},			/* 0.02289=f(0.92000)*/
-{ 0, 0,123,__LINE__, 0x3fa0122b, 0xe928b410, 0x3fedc28f, 0x5c28f5d1},			/* 0.03138=f(0.93000)*/
-{ 0, 0,123,__LINE__, 0x3fa45ed3, 0x447d25b7, 0x3fee147a, 0xe147ae23},			/* 0.03978=f(0.94000)*/
-{ 0, 0,123,__LINE__, 0x3fa89f50, 0x415046de, 0x3fee6666, 0x66666675},			/* 0.04809=f(0.95000)*/
-{ 0, 0,123,__LINE__, 0x3facd3c6, 0x911830f6, 0x3feeb851, 0xeb851ec7},			/* 0.05630=f(0.96000)*/
-{ 0, 0,123,__LINE__, 0x3fb07e2d, 0x5511a49e, 0x3fef0a3d, 0x70a3d719},			/* 0.06442=f(0.97000)*/
-{ 0, 0,123,__LINE__, 0x3fb28c95, 0x95b125ec, 0x3fef5c28, 0xf5c28f6b},			/* 0.07245=f(0.98000)*/
-{ 0, 0,123,__LINE__, 0x3fb4952c, 0xc9b3d886, 0x3fefae14, 0x7ae147bd},			/* 0.08040=f(0.99000)*/
-{ 0, 0,123,__LINE__, 0x3fb69802, 0x2cfb60b5, 0x3ff00000, 0x00000007},			/* 0.08825=f(1.00000)*/
-{ 0, 0,123,__LINE__, 0x3fb89524, 0xe4b0c050, 0x3ff028f5, 0xc28f5c30},			/* 0.09602=f(1.01000)*/
-{ 0, 0,123,__LINE__, 0x3fba8ca2, 0xf9b15c06, 0x3ff051eb, 0x851eb859},			/* 0.10370=f(1.02000)*/
-{ 0, 0,123,__LINE__, 0x3fbc7e8a, 0x9ed79098, 0x3ff07ae1, 0x47ae1482},			/* 0.11130=f(1.03000)*/
-{ 0, 0,123,__LINE__, 0x3fbe6ae8, 0xd81c685a, 0x3ff0a3d7, 0x0a3d70ab},			/* 0.11881=f(1.04000)*/
-{ 0, 0,123,__LINE__, 0x3fc028e5, 0x1ecaf482, 0x3ff0cccc, 0xccccccd4},			/* 0.12624=f(1.05000)*/
-{ 0, 0,123,__LINE__, 0x3fc1199d, 0xd8c1ca89, 0x3ff0f5c2, 0x8f5c28fd},			/* 0.13359=f(1.06000)*/
-{ 0, 0,123,__LINE__, 0x3fc207a5, 0x00967a0c, 0x3ff11eb8, 0x51eb8526},			/* 0.14085=f(1.07000)*/
-{ 0, 0,123,__LINE__, 0x3fc2f2ff, 0x0ac8da61, 0x3ff147ae, 0x147ae14f},			/* 0.14804=f(1.08000)*/
-{ 0, 0,123,__LINE__, 0x3fc3dbb2, 0x2de590c0, 0x3ff170a3, 0xd70a3d78},			/* 0.15514=f(1.09000)*/
-{ 0, 0,123,__LINE__, 0x3fc4c1c3, 0x993e54f7, 0x3ff19999, 0x999999a1},			/* 0.16216=f(1.10000)*/
-{ 0, 0,123,__LINE__, 0x3fc5a538, 0x9e473ea3, 0x3ff1c28f, 0x5c28f5ca},			/* 0.16910=f(1.11000)*/
-{ 0, 0,123,__LINE__, 0x3fc68616, 0x65138df1, 0x3ff1eb85, 0x1eb851f3},			/* 0.17596=f(1.12000)*/
-{ 0, 0,123,__LINE__, 0x3fc76461, 0x39214d4f, 0x3ff2147a, 0xe147ae1c},			/* 0.18275=f(1.13000)*/
-{ 0, 0,123,__LINE__, 0x3fc8401e, 0x81b1b3fd, 0x3ff23d70, 0xa3d70a45},			/* 0.18945=f(1.14000)*/
-{ 0, 0,123,__LINE__, 0x3fc91951, 0xc2045f8e, 0x3ff26666, 0x6666666e},			/* 0.19608=f(1.15000)*/
-{ 0, 0,123,__LINE__, 0x3fc9efff, 0xddaaef74, 0x3ff28f5c, 0x28f5c297},			/* 0.20263=f(1.16000)*/
-{ 0, 0,123,__LINE__, 0x3fcac42d, 0x488344e0, 0x3ff2b851, 0xeb851ec0},			/* 0.20911=f(1.17000)*/
-{ 0, 0,123,__LINE__, 0x3fcb95dd, 0x8a0f6a44, 0x3ff2e147, 0xae147ae9},			/* 0.21551=f(1.18000)*/
-{ 0, 0,123,__LINE__, 0x3fcc6515, 0x566cfdce, 0x3ff30a3d, 0x70a3d712},			/* 0.22183=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 0, 0,123,__LINE__, 0x3fda3d7f, 0xe8da69b9, 0x3ff921fb, 0x54442d18},			/* 0.41000=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0x3fd503f3, 0xfb09862e, 0x400921fb, 0x54442d18},			/* 0.32836=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0xbfd02737, 0xc250c8a7, 0x4012d97c, 0x7f3321d2},			/* -0.25239=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0xbfd3bea0, 0x1c4bb77b, 0x3fe33333, 0x333332ec},			/* -0.30850=f(0.60000)*/
-{ 0, 0,123,__LINE__, 0x3fe09412, 0xdcf4aa39, 0x40026666, 0x66666654},			/* 0.51807=f(2.30000)*/
-{ 0, 0,123,__LINE__, 0xbf9158e6, 0x2d7ad280, 0x400fffff, 0xffffffee},			/* -0.01694=f(4.00000)*/
-{10, 0,123,__LINE__, 0xbfd50086, 0x992c5a9f, 0x4016cccc, 0xccccccc4},			/* -0.32815=f(5.70000)*/
-{ 9, 0,123,__LINE__, 0x3fb736e8, 0x14d0c29c, 0x401d9999, 0x99999991},			/* 0.09068=f(7.40000)*/
-{ 0, 0,123,__LINE__, 0x3fce81cb, 0x425ee3a4, 0x40223333, 0x3333332f},			/* 0.23833=f(9.10000)*/
-{ 0, 0,123,__LINE__, 0xbfc0fa4a, 0xce88dd87, 0x40259999, 0x99999995},			/* -0.13263=f(10.8000)*/
-{ 0, 0,123,__LINE__, 0xbfc5ea5a, 0x3f977d63, 0x4028ffff, 0xfffffffb},			/* -0.17121=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0x3fc42a55, 0xca6bbeaa, 0x402c6666, 0x66666661},			/* 0.15754=f(14.2000)*/
-{ 0, 0,123,__LINE__, 0x3fbcf7bc, 0x29132ab3, 0x402fcccc, 0xccccccc7},			/* 0.11315=f(15.9000)*/
-{ 0, 0,123,__LINE__, 0xbfc5afb0, 0xb91e5ad2, 0x40319999, 0x99999997},			/* -0.16942=f(17.6000)*/
-{ 9, 0,123,__LINE__, 0xbfaf2151, 0xaaebb221, 0x40334ccc, 0xccccccca},			/* -0.06080=f(19.3000)*/
-{10, 0,123,__LINE__, 0x3fc5c92b, 0xac925867, 0x4034ffff, 0xfffffffd},			/* 0.17020=f(21.0000)*/
-{ 0, 0,123,__LINE__, 0x3f8c1ae5, 0x97a54388, 0x4036b333, 0x33333330},			/* 0.01372=f(22.7000)*/
-{ 0, 0,123,__LINE__, 0xbfc4a662, 0x75aefccb, 0x40386666, 0x66666663},			/* -0.16132=f(24.4000)*/
-{ 9, 0,123,__LINE__, 0x3f9c2b22, 0xd169e40f, 0x403a1999, 0x99999996},			/* 0.02750=f(26.1000)*/
-{ 0, 0,123,__LINE__, 0x3fc2771d, 0x63e62eec, 0x403bcccc, 0xccccccc9},			/* 0.14426=f(27.8000)*/
-{ 0, 0,123,__LINE__, 0xbfafc39b, 0xf28f96ed, 0x403d7fff, 0xfffffffc},			/* -0.06203=f(29.5000)*/
-0,};
-test_y0f(m)   {run_vector_1(m,y0f_vec,(char *)(y0f),"y0f","ff");   }	
diff --git a/newlib/libm/test/y1_vec.c b/newlib/libm/test/y1_vec.c
deleted file mode 100644
index 3cb549749..000000000
--- a/newlib/libm/test/y1_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type y1_vec[] = {
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{64, 0,123,__LINE__, 0xc3028f34, 0x51ccc8e4, 0x3cd19000, 0x00000000},			/* -6.53001e+14=f(9.74915e-16)*/
-{64, 0,123,__LINE__, 0xc04fd6dc, 0x3e334e38, 0x3f847ae1, 0x47ae16ad},			/* -63.6785=f(0.01000)*/
-{64, 0,123,__LINE__, 0xc03fdc1c, 0xb0eef4ea, 0x3f947ae1, 0x47ae1594},			/* -31.8598=f(0.02000)*/
-{64, 0,123,__LINE__, 0xc0354290, 0xb7c32631, 0x3f9eb851, 0xeb851fd2},			/* -21.2600=f(0.03000)*/
-{64, 0,123,__LINE__, 0xc02fedb9, 0xe607ef4f, 0x3fa47ae1, 0x47ae1508},			/* -15.9643=f(0.04000)*/
-{64, 0,123,__LINE__, 0xc0299467, 0xe5a18b39, 0x3fa99999, 0x99999a27},			/* -12.7898=f(0.05000)*/
-{64, 0,123,__LINE__, 0xc0255a01, 0x0c0e9f0b, 0x3faeb851, 0xeb851f46},			/* -10.6757=f(0.06000)*/
-{64, 0,123,__LINE__, 0xc02255c1, 0x41fbfbf0, 0x3fb1eb85, 0x1eb85232},			/* -9.16749=f(0.07000)*/
-{64, 0,123,__LINE__, 0xc0201349, 0x6e9843f8, 0x3fb47ae1, 0x47ae14c1},			/* -8.03767=f(0.08000)*/
-{64, 0,123,__LINE__, 0xc01ca3e9, 0xbb27878f, 0x3fb70a3d, 0x70a3d750},			/* -7.16007=f(0.09000)*/
-{64, 0,123,__LINE__, 0xc019d5f7, 0x4698d559, 0x3fb99999, 0x999999df},			/* -6.45895=f(0.10000)*/
-{64, 0,123,__LINE__, 0xc0178b61, 0xd24a2160, 0x3fbc28f5, 0xc28f5c6e},			/* -5.88611=f(0.11000)*/
-{64, 0,123,__LINE__, 0xc015a344, 0x4a03f79e, 0x3fbeb851, 0xeb851efd},			/* -5.40944=f(0.12000)*/
-{64, 0,123,__LINE__, 0xc01406d9, 0xbe1b5f10, 0x3fc0a3d7, 0x0a3d70c6},			/* -5.00669=f(0.13000)*/
-{64, 0,123,__LINE__, 0xc012a5df, 0x770b6f6d, 0x3fc1eb85, 0x1eb8520e},			/* -4.66198=f(0.14000)*/
-{64, 0,123,__LINE__, 0xc0117469, 0x70206659, 0x3fc33333, 0x33333356},			/* -4.36368=f(0.15000)*/
-{64, 0,123,__LINE__, 0xc0106987, 0x29e4663a, 0x3fc47ae1, 0x47ae149e},			/* -4.10305=f(0.16000)*/
-{64, 0,123,__LINE__, 0xc00efcc6, 0x1239add3, 0x3fc5c28f, 0x5c28f5e6},			/* -3.87342=f(0.17000)*/
-{64, 0,123,__LINE__, 0xc00d5b59, 0x31f511ee, 0x3fc70a3d, 0x70a3d72e},			/* -3.66960=f(0.18000)*/
-{64, 0,123,__LINE__, 0xc00be664, 0x31944804, 0x3fc851eb, 0x851eb876},			/* -3.48749=f(0.19000)*/
-{64, 0,123,__LINE__, 0xc00a9731, 0x8e2c8b12, 0x3fc99999, 0x999999be},			/* -3.32382=f(0.20000)*/
-{64, 0,123,__LINE__, 0xc0096853, 0x558ea2d0, 0x3fcae147, 0xae147b06},			/* -3.17594=f(0.21000)*/
-{64, 0,123,__LINE__, 0xc0085558, 0xa9b5bffa, 0x3fcc28f5, 0xc28f5c4e},			/* -3.04167=f(0.22000)*/
-{64, 0,123,__LINE__, 0xc0075a96, 0xb404b99e, 0x3fcd70a3, 0xd70a3d96},			/* -2.91923=f(0.23000)*/
-{64, 0,123,__LINE__, 0xc00674ff, 0x5ccd6bf8, 0x3fceb851, 0xeb851ede},			/* -2.80712=f(0.24000)*/
-{64, 0,123,__LINE__, 0xc005a201, 0xec26d03b, 0x3fd00000, 0x00000013},			/* -2.70410=f(0.25000)*/
-{64, 0,123,__LINE__, 0xc004df72, 0xe8cf58bb, 0x3fd0a3d7, 0x0a3d70b7},			/* -2.60910=f(0.26000)*/
-{64, 0,123,__LINE__, 0xc0042b79, 0x54525687, 0x3fd147ae, 0x147ae15b},			/* -2.52122=f(0.27000)*/
-{64, 0,123,__LINE__, 0xc003847f, 0xed0a3f74, 0x3fd1eb85, 0x1eb851ff},			/* -2.43969=f(0.28000)*/
-{64, 0,123,__LINE__, 0xc002e929, 0x7d58868e, 0x3fd28f5c, 0x28f5c2a3},			/* -2.36384=f(0.29000)*/
-{64, 0,123,__LINE__, 0xc0025847, 0x81bd5896, 0x3fd33333, 0x33333347},			/* -2.29310=f(0.30000)*/
-{64, 0,123,__LINE__, 0xc001d0d2, 0x9e89a058, 0x3fd3d70a, 0x3d70a3eb},			/* -2.22696=f(0.31000)*/
-{64, 0,123,__LINE__, 0xc00151e4, 0x7fb8d6a3, 0x3fd47ae1, 0x47ae148f},			/* -2.16498=f(0.32000)*/
-{64, 0,123,__LINE__, 0xc000dab2, 0xd6195bcc, 0x3fd51eb8, 0x51eb8533},			/* -2.10678=f(0.33000)*/
-{64, 0,123,__LINE__, 0xc0006a8b, 0x37002a86, 0x3fd5c28f, 0x5c28f5d7},			/* -2.05202=f(0.34000)*/
-{64, 0,123,__LINE__, 0xc00000cf, 0xb133ff94, 0x3fd66666, 0x6666667b},			/* -2.00039=f(0.35000)*/
-{64, 0,123,__LINE__, 0xbfff39e7, 0xe79ec9ca, 0x3fd70a3d, 0x70a3d71f},			/* -1.95163=f(0.36000)*/
-{64, 0,123,__LINE__, 0xbffe7cf5, 0xd6f1bcf2, 0x3fd7ae14, 0x7ae147c3},			/* -1.90550=f(0.37000)*/
-{64, 0,123,__LINE__, 0xbffdc9e9, 0x8043d492, 0x3fd851eb, 0x851eb867},			/* -1.86179=f(0.38000)*/
-{64, 0,123,__LINE__, 0xbffd1ffa, 0x43ee5bc8, 0x3fd8f5c2, 0x8f5c290b},			/* -1.82030=f(0.39000)*/
-{64, 0,123,__LINE__, 0xbffc7e73, 0xaf48021c, 0x3fd99999, 0x999999af},			/* -1.78087=f(0.40000)*/
-{64, 0,123,__LINE__, 0xbffbe4b3, 0x0580d476, 0x3fda3d70, 0xa3d70a53},			/* -1.74333=f(0.41000)*/
-{64, 0,123,__LINE__, 0xbffb5225, 0x22c20732, 0x3fdae147, 0xae147af7},			/* -1.70755=f(0.42000)*/
-{64, 0,123,__LINE__, 0xbffac644, 0xaadd5200, 0x3fdb851e, 0xb851eb9b},			/* -1.67340=f(0.43000)*/
-{64, 0,123,__LINE__, 0xbffa4098, 0x7784512a, 0x3fdc28f5, 0xc28f5c3f},			/* -1.64077=f(0.44000)*/
-{64, 0,123,__LINE__, 0xbff9c0b2, 0x3c24180d, 0x3fdccccc, 0xcccccce3},			/* -1.60954=f(0.45000)*/
-{64, 0,123,__LINE__, 0xbff9462d, 0x5739a738, 0x3fdd70a3, 0xd70a3d87},			/* -1.57963=f(0.46000)*/
-{64, 0,123,__LINE__, 0xbff8d0ad, 0xca581cba, 0x3fde147a, 0xe147ae2b},			/* -1.55094=f(0.47000)*/
-{64, 0,123,__LINE__, 0xbff85fdf, 0x533acd50, 0x3fdeb851, 0xeb851ecf},			/* -1.52340=f(0.48000)*/
-{64, 0,123,__LINE__, 0xbff7f374, 0xa129a302, 0x3fdf5c28, 0xf5c28f73},			/* -1.49693=f(0.49000)*/
-{64, 0,123,__LINE__, 0xbff78b26, 0xa2b7c4d2, 0x3fe00000, 0x0000000b},			/* -1.47147=f(0.50000)*/
-{64, 0,123,__LINE__, 0xbff726b3, 0xe88401f2, 0x3fe051eb, 0x851eb85d},			/* -1.44694=f(0.51000)*/
-{64, 0,123,__LINE__, 0xbff6c5e0, 0x1a2655ef, 0x3fe0a3d7, 0x0a3d70af},			/* -1.42330=f(0.52000)*/
-{64, 0,123,__LINE__, 0xbff66873, 0x7ae34f38, 0x3fe0f5c2, 0x8f5c2901},			/* -1.40050=f(0.53000)*/
-{64, 0,123,__LINE__, 0xbff60e3a, 0x7c1955f2, 0x3fe147ae, 0x147ae153},			/* -1.37847=f(0.54000)*/
-{64, 0,123,__LINE__, 0xbff5b705, 0x5ba816cb, 0x3fe19999, 0x999999a5},			/* -1.35718=f(0.55000)*/
-{64, 0,123,__LINE__, 0xbff562a7, 0xccd257c6, 0x3fe1eb85, 0x1eb851f7},			/* -1.33658=f(0.56000)*/
-{64, 0,123,__LINE__, 0xbff510f8, 0xaa5062b5, 0x3fe23d70, 0xa3d70a49},			/* -1.31664=f(0.57000)*/
-{63, 0,123,__LINE__, 0xbff4c1d1, 0xb076b8b2, 0x3fe28f5c, 0x28f5c29b},			/* -1.29731=f(0.58000)*/
-{64, 0,123,__LINE__, 0xbff4750f, 0x3e7b569c, 0x3fe2e147, 0xae147aed},			/* -1.27857=f(0.59000)*/
-{64, 0,123,__LINE__, 0xbff42a90, 0x1e049cad, 0x3fe33333, 0x3333333f},			/* -1.26039=f(0.60000)*/
-{64, 0,123,__LINE__, 0xbff3e235, 0x5048deef, 0x3fe3851e, 0xb851eb91},			/* -1.24272=f(0.61000)*/
-{62, 0,123,__LINE__, 0xbff39be1, 0xe01d876d, 0x3fe3d70a, 0x3d70a3e3},			/* -1.22555=f(0.62000)*/
-{64, 0,123,__LINE__, 0xbff3577a, 0xb8692d6b, 0x3fe428f5, 0xc28f5c35},			/* -1.20885=f(0.63000)*/
-{64, 0,123,__LINE__, 0xbff314e6, 0x7e7d9c43, 0x3fe47ae1, 0x47ae1487},			/* -1.19260=f(0.64000)*/
-{64, 0,123,__LINE__, 0xbff2d40d, 0x6feded0b, 0x3fe4cccc, 0xccccccd9},			/* -1.17677=f(0.65000)*/
-{64, 0,123,__LINE__, 0xbff294d9, 0x4381ec61, 0x3fe51eb8, 0x51eb852b},			/* -1.16134=f(0.66000)*/
-{64, 0,123,__LINE__, 0xbff25735, 0x0cf35a15, 0x3fe570a3, 0xd70a3d7d},			/* -1.14629=f(0.67000)*/
-{64, 0,123,__LINE__, 0xbff21b0d, 0x232b6443, 0x3fe5c28f, 0x5c28f5cf},			/* -1.13160=f(0.68000)*/
-{64, 0,123,__LINE__, 0xbff1e04f, 0x08bf4b2c, 0x3fe6147a, 0xe147ae21},			/* -1.11726=f(0.69000)*/
-{64, 0,123,__LINE__, 0xbff1a6e9, 0x56728d2d, 0x3fe66666, 0x66666673},			/* -1.10325=f(0.70000)*/
-{64, 0,123,__LINE__, 0xbff16ecb, 0xa78b7a7c, 0x3fe6b851, 0xeb851ec5},			/* -1.08955=f(0.71000)*/
-{64, 0,123,__LINE__, 0xbff137e6, 0x87ccc07e, 0x3fe70a3d, 0x70a3d717},			/* -1.07614=f(0.72000)*/
-{64, 0,123,__LINE__, 0xbff1022b, 0x62eb78d4, 0x3fe75c28, 0xf5c28f69},			/* -1.06303=f(0.73000)*/
-{64, 0,123,__LINE__, 0xbff0cd8c, 0x755da97a, 0x3fe7ae14, 0x7ae147bb},			/* -1.05018=f(0.74000)*/
-{64, 0,123,__LINE__, 0xbff099fc, 0xbe60fd7b, 0x3fe80000, 0x0000000d},			/* -1.03759=f(0.75000)*/
-{64, 0,123,__LINE__, 0xbff0676f, 0xf31ce374, 0x3fe851eb, 0x851eb85f},			/* -1.02525=f(0.76000)*/
-{64, 0,123,__LINE__, 0xbff035da, 0x72c63ebc, 0x3fe8a3d7, 0x0a3d70b1},			/* -1.01314=f(0.77000)*/
-{64, 0,123,__LINE__, 0xbff00531, 0x3bad7f1b, 0x3fe8f5c2, 0x8f5c2903},			/* -1.00126=f(0.78000)*/
-{64, 0,123,__LINE__, 0xbfefaad3, 0xc2449974, 0x3fe947ae, 0x147ae155},			/* -0.98960=f(0.79000)*/
-{64, 0,123,__LINE__, 0xbfef4cf5, 0x04341779, 0x3fe99999, 0x999999a7},			/* -0.97814=f(0.80000)*/
-{64, 0,123,__LINE__, 0xbfeef0b3, 0x8110aaef, 0x3fe9eb85, 0x1eb851f9},			/* -0.96688=f(0.81000)*/
-{60, 0,123,__LINE__, 0xbfee95fd, 0x72b45756, 0x3fea3d70, 0xa3d70a4b},			/* -0.95580=f(0.82000)*/
-{64, 0,123,__LINE__, 0xbfee3cc1, 0xfa0c451d, 0x3fea8f5c, 0x28f5c29d},			/* -0.94491=f(0.83000)*/
-{64, 0,123,__LINE__, 0xbfede4f1, 0x114a1d4d, 0x3feae147, 0xae147aef},			/* -0.93419=f(0.84000)*/
-{64, 0,123,__LINE__, 0xbfed8e7b, 0x7f0fdfe2, 0x3feb3333, 0x33333341},			/* -0.92364=f(0.85000)*/
-{64, 0,123,__LINE__, 0xbfed3952, 0xca81c193, 0x3feb851e, 0xb851eb93},			/* -0.91324=f(0.86000)*/
-{64, 0,123,__LINE__, 0xbfece569, 0x302b8076, 0x3febd70a, 0x3d70a3e5},			/* -0.90300=f(0.87000)*/
-{64, 0,123,__LINE__, 0xbfec92b1, 0x97a84f99, 0x3fec28f5, 0xc28f5c37},			/* -0.89290=f(0.88000)*/
-{64, 0,123,__LINE__, 0xbfec411f, 0x89fdfebe, 0x3fec7ae1, 0x47ae1489},			/* -0.88294=f(0.89000)*/
-{64, 0,123,__LINE__, 0xbfebf0a7, 0x289d61ad, 0x3feccccc, 0xccccccdb},			/* -0.87312=f(0.90000)*/
-{64, 0,123,__LINE__, 0xbfeba13d, 0x24fb35db, 0x3fed1eb8, 0x51eb852d},			/* -0.86343=f(0.91000)*/
-{64, 0,123,__LINE__, 0xbfeb52d6, 0xb8b5e1a3, 0x3fed70a3, 0xd70a3d7f},			/* -0.85386=f(0.92000)*/
-{64, 0,123,__LINE__, 0xbfeb0569, 0x9e3d6973, 0x3fedc28f, 0x5c28f5d1},			/* -0.84441=f(0.93000)*/
-{64, 0,123,__LINE__, 0xbfeab8ec, 0x09f3df7c, 0x3fee147a, 0xe147ae23},			/* -0.83507=f(0.94000)*/
-{64, 0,123,__LINE__, 0xbfea6d54, 0xa3bd64c4, 0x3fee6666, 0x66666675},			/* -0.82584=f(0.95000)*/
-{64, 0,123,__LINE__, 0xbfea229a, 0x80f7910d, 0x3feeb851, 0xeb851ec7},			/* -0.81672=f(0.96000)*/
-{64, 0,123,__LINE__, 0xbfe9d8b5, 0x1ed0c3c8, 0x3fef0a3d, 0x70a3d719},			/* -0.80770=f(0.97000)*/
-{64, 0,123,__LINE__, 0xbfe98f9c, 0x5cf87d44, 0x3fef5c28, 0xf5c28f6b},			/* -0.79878=f(0.98000)*/
-{64, 0,123,__LINE__, 0xbfe94748, 0x78a26dfe, 0x3fefae14, 0x7ae147bd},			/* -0.78995=f(0.99000)*/
-{64, 0,123,__LINE__, 0xbfe8ffb2, 0x07d66b88, 0x3ff00000, 0x00000007},			/* -0.78121=f(1.00000)*/
-{64, 0,123,__LINE__, 0xbfe8b8d1, 0xf507f0f4, 0x3ff028f5, 0xc28f5c30},			/* -0.77256=f(1.01000)*/
-{64, 0,123,__LINE__, 0xbfe872a1, 0x7af03c5a, 0x3ff051eb, 0x851eb859},			/* -0.76399=f(1.02000)*/
-{64, 0,123,__LINE__, 0xbfe82d1a, 0x20a67d2e, 0x3ff07ae1, 0x47ae1482},			/* -0.75550=f(1.03000)*/
-{64, 0,123,__LINE__, 0xbfe7e835, 0xb5f1e144, 0x3ff0a3d7, 0x0a3d70ab},			/* -0.74709=f(1.04000)*/
-{64, 0,123,__LINE__, 0xbfe7a3ee, 0x4fd1a02b, 0x3ff0cccc, 0xccccccd4},			/* -0.73876=f(1.05000)*/
-{64, 0,123,__LINE__, 0xbfe7603e, 0x45376fba, 0x3ff0f5c2, 0x8f5c28fd},			/* -0.73049=f(1.06000)*/
-{64, 0,123,__LINE__, 0xbfe71d20, 0x2bf11178, 0x3ff11eb8, 0x51eb8526},			/* -0.72230=f(1.07000)*/
-{64, 0,123,__LINE__, 0xbfe6da8e, 0xd5bde79a, 0x3ff147ae, 0x147ae14f},			/* -0.71417=f(1.08000)*/
-{64, 0,123,__LINE__, 0xbfe69885, 0x4d8db9f0, 0x3ff170a3, 0xd70a3d78},			/* -0.70611=f(1.09000)*/
-{64, 0,123,__LINE__, 0xbfe656fe, 0xd4e60874, 0x3ff19999, 0x999999a1},			/* -0.69811=f(1.10000)*/
-{64, 0,123,__LINE__, 0xbfe615f6, 0xe16b79b2, 0x3ff1c28f, 0x5c28f5ca},			/* -0.69018=f(1.11000)*/
-{64, 0,123,__LINE__, 0xbfe5d569, 0x1a8d2048, 0x3ff1eb85, 0x1eb851f3},			/* -0.68230=f(1.12000)*/
-{64, 0,123,__LINE__, 0xbfe59551, 0x574f7bdf, 0x3ff2147a, 0xe147ae1c},			/* -0.67447=f(1.13000)*/
-{64, 0,123,__LINE__, 0xbfe555ab, 0x9c35400a, 0x3ff23d70, 0xa3d70a45},			/* -0.66670=f(1.14000)*/
-{64, 0,123,__LINE__, 0xbfe51674, 0x19440e79, 0x3ff26666, 0x6666666e},			/* -0.65899=f(1.15000)*/
-{64, 0,123,__LINE__, 0xbfe4d7a7, 0x28237235, 0x3ff28f5c, 0x28f5c297},			/* -0.65132=f(1.16000)*/
-{64, 0,123,__LINE__, 0xbfe49941, 0x4a548778, 0x3ff2b851, 0xeb851ec0},			/* -0.64370=f(1.17000)*/
-{64, 0,123,__LINE__, 0xbfe45b3f, 0x2780d71b, 0x3ff2e147, 0xae147ae9},			/* -0.63613=f(1.18000)*/
-{64, 0,123,__LINE__, 0xbfe41d9d, 0x8bdf0626, 0x3ff30a3d, 0x70a3d712},			/* -0.62861=f(1.19000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{63, 0,123,__LINE__, 0xbfd77123, 0x5406f041, 0x3ff921fb, 0x54442d18},			/* -0.36628=f(1.57079)*/
-{61, 0,123,__LINE__, 0x3fd6f7c6, 0x1c3e790b, 0x400921fb, 0x54442d18},			/* 0.35887=f(3.14159)*/
-{59, 0,123,__LINE__, 0x3fced109, 0x0321e8e8, 0x4012d97c, 0x7f3321d2},			/* 0.24075=f(4.71238)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{64,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{64, 0,123,__LINE__, 0xbff42a90, 0x1e049cf8, 0x3fe33333, 0x333332ec},			/* -1.26039=f(0.60000)*/
-{60, 0,123,__LINE__, 0x3faac417, 0xa3bf4753, 0x40026666, 0x66666654},			/* 0.05227=f(2.30000)*/
-{59, 0,123,__LINE__, 0x3fd9779d, 0x664523cf, 0x400fffff, 0xffffffee},			/* 0.39792=f(4.00000)*/
-{56, 0,123,__LINE__, 0xbfb6b692, 0xa5de21ac, 0x4016cccc, 0xccccccc4},			/* -0.08872=f(5.70000)*/
-{55, 0,123,__LINE__, 0xbfd17ab7, 0x2b13b91f, 0x401d9999, 0x99999991},			/* -0.27311=f(7.40000)*/
-{57, 0,123,__LINE__, 0x3fc050cd, 0x513210be, 0x40223333, 0x3333332f},			/* 0.12746=f(9.10000)*/
-{62, 0,123,__LINE__, 0x3fc940c4, 0xd7d877b5, 0x40259999, 0x99999995},			/* 0.19728=f(10.8000)*/
-{63, 0,123,__LINE__, 0xbfc3b0f8, 0xd459e252, 0x4028ffff, 0xfffffffb},			/* -0.15383=f(12.5000)*/
-{61, 0,123,__LINE__, 0xbfc165b0, 0xfd54018b, 0x402c6666, 0x66666661},			/* -0.13591=f(14.2000)*/
-{64, 0,123,__LINE__, 0x3fc594e5, 0x4261700e, 0x402fcccc, 0xccccccc7},			/* 0.16860=f(15.9000)*/
-{64, 0,123,__LINE__, 0x3fb4e0ac, 0x47a4e1a5, 0x40319999, 0x99999997},			/* 0.08155=f(17.6000)*/
-{64, 0,123,__LINE__, 0xbfc61c4c, 0x8f518084, 0x40334ccc, 0xccccccca},			/* -0.17273=f(19.3000)*/
-{64, 0,123,__LINE__, 0xbfa0a8fc, 0x69909f2e, 0x4034ffff, 0xfffffffd},			/* -0.03253=f(21.0000)*/
-{59, 0,123,__LINE__, 0x3fc567a2, 0x1848d0cf, 0x4036b333, 0x33333330},			/* 0.16722=f(22.7000)*/
-{64, 0,123,__LINE__, 0xbf867d4b, 0x580d2579, 0x40386666, 0x66666663},			/* -0.01098=f(24.4000)*/
-{64, 0,123,__LINE__, 0xbfc39cd0, 0xcf7f5216, 0x403a1999, 0x99999996},			/* -0.15322=f(26.1000)*/
-{64, 0,123,__LINE__, 0x3fa8b66b, 0x18717143, 0x403bcccc, 0xccccccc9},			/* 0.04826=f(27.8000)*/
-{64, 0,123,__LINE__, 0x3fc0e92b, 0x1cafe2d0, 0x403d7fff, 0xfffffffc},			/* 0.13211=f(29.5000)*/
-0,};
-test_y1(m)   {run_vector_1(m,y1_vec,(char *)(y1),"y1","dd");   }	
diff --git a/newlib/libm/test/y1f_vec.c b/newlib/libm/test/y1f_vec.c
deleted file mode 100644
index 419afb12b..000000000
--- a/newlib/libm/test/y1f_vec.c
+++ /dev/null
@@ -1,288 +0,0 @@
-#include "test.h"
- one_line_type y1f_vec[] = {
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff33333, 0x33333333},			/* 64.0000=f(-1.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff30a3d, 0x70a3d70a},			/* 64.0000=f(-1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2e147, 0xae147ae1},			/* 64.0000=f(-1.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2b851, 0xeb851eb8},			/* 64.0000=f(-1.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff28f5c, 0x28f5c28f},			/* 64.0000=f(-1.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff26666, 0x66666666},			/* 64.0000=f(-1.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff23d70, 0xa3d70a3d},			/* 64.0000=f(-1.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff2147a, 0xe147ae14},			/* 64.0000=f(-1.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1eb85, 0x1eb851eb},			/* 64.0000=f(-1.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff1c28f, 0x5c28f5c2},			/* 64.0000=f(-1.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x99999999},			/* 64.0000=f(-1.10000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff170a3, 0xd70a3d70},			/* 64.0000=f(-1.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff147ae, 0x147ae147},			/* 64.0000=f(-1.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff11eb8, 0x51eb851e},			/* 64.0000=f(-1.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0f5c2, 0x8f5c28f5},			/* 64.0000=f(-1.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0cccc, 0xcccccccc},			/* 64.0000=f(-1.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff0a3d7, 0x0a3d70a3},			/* 64.0000=f(-1.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff07ae1, 0x47ae147a},			/* 64.0000=f(-1.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff051eb, 0x851eb851},			/* 64.0000=f(-1.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff028f5, 0xc28f5c28},			/* 64.0000=f(-1.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefffff, 0xfffffffe},			/* 64.0000=f(-0.01000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfefae14, 0x7ae147ac},			/* 64.0000=f(-0.99000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef5c28, 0xf5c28f5a},			/* 64.0000=f(-0.98000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfef0a3d, 0x70a3d708},			/* 64.0000=f(-0.97000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeeb851, 0xeb851eb6},			/* 64.0000=f(-0.96000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee6666, 0x66666664},			/* 64.0000=f(-0.95000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfee147a, 0xe147ae12},			/* 64.0000=f(-0.94000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfedc28f, 0x5c28f5c0},			/* 64.0000=f(-0.93000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed70a3, 0xd70a3d6e},			/* 64.0000=f(-0.92000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfed1eb8, 0x51eb851c},			/* 64.0000=f(-0.91000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeccccc, 0xccccccca},			/* 64.0000=f(-0.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec7ae1, 0x47ae1478},			/* 64.0000=f(-0.89000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfec28f5, 0xc28f5c26},			/* 64.0000=f(-0.88000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfebd70a, 0x3d70a3d4},			/* 64.0000=f(-0.87000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb851e, 0xb851eb82},			/* 64.0000=f(-0.86000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeb3333, 0x33333330},			/* 64.0000=f(-0.85000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfeae147, 0xae147ade},			/* 64.0000=f(-0.84000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea8f5c, 0x28f5c28c},			/* 64.0000=f(-0.83000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfea3d70, 0xa3d70a3a},			/* 64.0000=f(-0.82000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe9eb85, 0x1eb851e8},			/* 64.0000=f(-0.81000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe99999, 0x99999996},			/* 64.0000=f(-0.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe947ae, 0x147ae144},			/* 64.0000=f(-0.79000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8f5c2, 0x8f5c28f2},			/* 64.0000=f(-0.78000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe8a3d7, 0x0a3d70a0},			/* 64.0000=f(-0.77000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe851eb, 0x851eb84e},			/* 64.0000=f(-0.76000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ffff, 0xfffffffc},			/* 64.0000=f(-0.75000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe7ae14, 0x7ae147aa},			/* 64.0000=f(-0.74000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe75c28, 0xf5c28f58},			/* 64.0000=f(-0.73000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe70a3d, 0x70a3d706},			/* 64.0000=f(-0.72000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6b851, 0xeb851eb4},			/* 64.0000=f(-0.71000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe66666, 0x66666662},			/* 64.0000=f(-0.70000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe6147a, 0xe147ae10},			/* 64.0000=f(-0.69000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe5c28f, 0x5c28f5be},			/* 64.0000=f(-0.68000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe570a3, 0xd70a3d6c},			/* 64.0000=f(-0.67000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe51eb8, 0x51eb851a},			/* 64.0000=f(-0.66000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe4cccc, 0xccccccc8},			/* 64.0000=f(-0.65000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe47ae1, 0x47ae1476},			/* 64.0000=f(-0.64000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe428f5, 0xc28f5c24},			/* 64.0000=f(-0.63000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3d70a, 0x3d70a3d2},			/* 64.0000=f(-0.62000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe3851e, 0xb851eb80},			/* 64.0000=f(-0.61000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe33333, 0x3333332e},			/* 64.0000=f(-0.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe2e147, 0xae147adc},			/* 64.0000=f(-0.59000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe28f5c, 0x28f5c28a},			/* 64.0000=f(-0.58000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe23d70, 0xa3d70a38},			/* 64.0000=f(-0.57000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe1eb85, 0x1eb851e6},			/* 64.0000=f(-0.56000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe19999, 0x99999994},			/* 64.0000=f(-0.55000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe147ae, 0x147ae142},			/* 64.0000=f(-0.54000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0f5c2, 0x8f5c28f0},			/* 64.0000=f(-0.53000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe0a3d7, 0x0a3d709e},			/* 64.0000=f(-0.52000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfe051eb, 0x851eb84c},			/* 64.0000=f(-0.51000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdfffff, 0xfffffff4},			/* 64.0000=f(-0.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdf5c28, 0xf5c28f50},			/* 64.0000=f(-0.49000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdeb851, 0xeb851eac},			/* 64.0000=f(-0.48000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfde147a, 0xe147ae08},			/* 64.0000=f(-0.47000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdd70a3, 0xd70a3d64},			/* 64.0000=f(-0.46000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdccccc, 0xccccccc0},			/* 64.0000=f(-0.45000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdc28f5, 0xc28f5c1c},			/* 64.0000=f(-0.44000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdb851e, 0xb851eb78},			/* 64.0000=f(-0.43000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfdae147, 0xae147ad4},			/* 64.0000=f(-0.42000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfda3d70, 0xa3d70a30},			/* 64.0000=f(-0.41000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd99999, 0x9999998c},			/* 64.0000=f(-0.40000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd8f5c2, 0x8f5c28e8},			/* 64.0000=f(-0.39000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd851eb, 0x851eb844},			/* 64.0000=f(-0.38000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd7ae14, 0x7ae147a0},			/* 64.0000=f(-0.37000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd70a3d, 0x70a3d6fc},			/* 64.0000=f(-0.36000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd66666, 0x66666658},			/* 64.0000=f(-0.35000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd5c28f, 0x5c28f5b4},			/* 64.0000=f(-0.34000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd51eb8, 0x51eb8510},			/* 64.0000=f(-0.33000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd47ae1, 0x47ae146c},			/* 64.0000=f(-0.32000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd3d70a, 0x3d70a3c8},			/* 64.0000=f(-0.31000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd33333, 0x33333324},			/* 64.0000=f(-0.30000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd28f5c, 0x28f5c280},			/* 64.0000=f(-0.29000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd1eb85, 0x1eb851dc},			/* 64.0000=f(-0.28000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd147ae, 0x147ae138},			/* 64.0000=f(-0.27000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfd0a3d7, 0x0a3d7094},			/* 64.0000=f(-0.26000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcfffff, 0xffffffe0},			/* 64.0000=f(-0.25000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfceb851, 0xeb851e98},			/* 64.0000=f(-0.24000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcd70a3, 0xd70a3d50},			/* 64.0000=f(-0.23000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcc28f5, 0xc28f5c08},			/* 64.0000=f(-0.22000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfcae147, 0xae147ac0},			/* 64.0000=f(-0.21000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc99999, 0x99999978},			/* 64.0000=f(-0.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc851eb, 0x851eb830},			/* 64.0000=f(-0.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc70a3d, 0x70a3d6e8},			/* 64.0000=f(-0.18000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc5c28f, 0x5c28f5a0},			/* 64.0000=f(-0.17000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc47ae1, 0x47ae1458},			/* 64.0000=f(-0.16000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc33333, 0x33333310},			/* 64.0000=f(-0.15000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc1eb85, 0x1eb851c8},			/* 64.0000=f(-0.14000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfc0a3d7, 0x0a3d7080},			/* 64.0000=f(-0.13000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbeb851, 0xeb851e71},			/* 64.0000=f(-0.12000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfbc28f5, 0xc28f5be2},			/* 64.0000=f(-0.11000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb99999, 0x99999953},			/* 64.0000=f(-0.00100)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb70a3d, 0x70a3d6c4},			/* 64.0000=f(-0.09000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb47ae1, 0x47ae1435},			/* 64.0000=f(-0.08000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfb1eb85, 0x1eb851a6},			/* 64.0000=f(-0.07000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfaeb851, 0xeb851e2d},			/* 64.0000=f(-0.06000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa99999, 0x9999990e},			/* 64.0000=f(-0.05000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbfa47ae1, 0x47ae13ef},			/* 64.0000=f(-0.04000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf9eb851, 0xeb851da0},			/* 64.0000=f(-0.03000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf947ae1, 0x47ae1362},			/* 64.0000=f(-0.02000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbf847ae1, 0x47ae1249},			/* 64.0000=f(-0.00010)*/
-{ 0, 0,123,__LINE__, 0xc3028f34, 0x51ccc8e4, 0x3cd19000, 0x00000000},			/* -6.53001e+14=f(9.74915e-16)*/
-{10, 0,123,__LINE__, 0xc04fd6dc, 0x4a237936, 0x3f847ae1, 0x47ae16ad},			/* -63.6785=f(0.01000)*/
-{ 9, 0,123,__LINE__, 0xc03fdc1c, 0xbcdbf22f, 0x3f947ae1, 0x47ae1594},			/* -31.8598=f(0.02000)*/
-{ 9, 0,123,__LINE__, 0xc0354290, 0xbfb7f7f9, 0x3f9eb851, 0xeb851fd2},			/* -21.2600=f(0.03000)*/
-{ 9, 0,123,__LINE__, 0xc02fedb9, 0xf1ea1fcd, 0x3fa47ae1, 0x47ae1508},			/* -15.9643=f(0.04000)*/
-{ 9, 0,123,__LINE__, 0xc0299467, 0xdf586605, 0x3fa99999, 0x99999a27},			/* -12.7898=f(0.05000)*/
-{ 9, 0,123,__LINE__, 0xc0255a01, 0x13ed563a, 0x3faeb851, 0xeb851f46},			/* -10.6757=f(0.06000)*/
-{ 9, 0,123,__LINE__, 0xc02255c1, 0x40b58d14, 0x3fb1eb85, 0x1eb85232},			/* -9.16749=f(0.07000)*/
-{ 9, 0,123,__LINE__, 0xc0201349, 0x7474bd52, 0x3fb47ae1, 0x47ae14c1},			/* -8.03767=f(0.08000)*/
-{ 9, 0,123,__LINE__, 0xc01ca3e9, 0xa85cbc4d, 0x3fb70a3d, 0x70a3d750},			/* -7.16007=f(0.09000)*/
-{ 9, 0,123,__LINE__, 0xc019d5f7, 0x403ad72f, 0x3fb99999, 0x999999df},			/* -6.45895=f(0.10000)*/
-{10, 0,123,__LINE__, 0xc0178b61, 0xd44ddafb, 0x3fbc28f5, 0xc28f5c6e},			/* -5.88611=f(0.11000)*/
-{10, 0,123,__LINE__, 0xc015a344, 0x51f62ac0, 0x3fbeb851, 0xeb851efd},			/* -5.40944=f(0.12000)*/
-{10, 0,123,__LINE__, 0xc01406d9, 0xca1b1ec4, 0x3fc0a3d7, 0x0a3d70c6},			/* -5.00669=f(0.13000)*/
-{10, 0,123,__LINE__, 0xc012a5df, 0x75a19fe5, 0x3fc1eb85, 0x1eb8520e},			/* -4.66198=f(0.14000)*/
-{10, 0,123,__LINE__, 0xc0117469, 0x650d860b, 0x3fc33333, 0x33333356},			/* -4.36368=f(0.15000)*/
-{10, 0,123,__LINE__, 0xc0106987, 0x2f9911e2, 0x3fc47ae1, 0x47ae149e},			/* -4.10305=f(0.16000)*/
-{10, 0,123,__LINE__, 0xc00efcc6, 0x0cef1edd, 0x3fc5c28f, 0x5c28f5e6},			/* -3.87342=f(0.17000)*/
-{10, 0,123,__LINE__, 0xc00d5b59, 0x1f256b63, 0x3fc70a3d, 0x70a3d72e},			/* -3.66960=f(0.18000)*/
-{10, 0,123,__LINE__, 0xc00be664, 0x37c9ea76, 0x3fc851eb, 0x851eb876},			/* -3.48749=f(0.19000)*/
-{10, 0,123,__LINE__, 0xc00a9731, 0x87a43b11, 0x3fc99999, 0x999999be},			/* -3.32382=f(0.20000)*/
-{10, 0,123,__LINE__, 0xc0096853, 0x6207b116, 0x3fcae147, 0xae147b06},			/* -3.17594=f(0.21000)*/
-{10, 0,123,__LINE__, 0xc0085558, 0xab8c81c6, 0x3fcc28f5, 0xc28f5c4e},			/* -3.04167=f(0.22000)*/
-{10, 0,123,__LINE__, 0xc0075a96, 0xadd549e9, 0x3fcd70a3, 0xd70a3d96},			/* -2.91923=f(0.23000)*/
-{10, 0,123,__LINE__, 0xc00674ff, 0x647a71f2, 0x3fceb851, 0xeb851ede},			/* -2.80712=f(0.24000)*/
-{10, 0,123,__LINE__, 0xc005a201, 0xecdf68b2, 0x3fd00000, 0x00000013},			/* -2.70410=f(0.25000)*/
-{10, 0,123,__LINE__, 0xc004df72, 0xf5273d90, 0x3fd0a3d7, 0x0a3d70b7},			/* -2.60910=f(0.26000)*/
-{10, 0,123,__LINE__, 0xc0042b79, 0x474cf53e, 0x3fd147ae, 0x147ae15b},			/* -2.52122=f(0.27000)*/
-{10, 0,123,__LINE__, 0xc003847f, 0xeadb17f2, 0x3fd1eb85, 0x1eb851ff},			/* -2.43969=f(0.28000)*/
-{10, 0,123,__LINE__, 0xc002e929, 0x84dde3dd, 0x3fd28f5c, 0x28f5c2a3},			/* -2.36384=f(0.29000)*/
-{10, 0,123,__LINE__, 0xc0025847, 0x76766e7f, 0x3fd33333, 0x33333347},			/* -2.29310=f(0.30000)*/
-{10, 0,123,__LINE__, 0xc001d0d2, 0x9bd35dd2, 0x3fd3d70a, 0x3d70a3eb},			/* -2.22696=f(0.31000)*/
-{10, 0,123,__LINE__, 0xc00151e4, 0x86d2966e, 0x3fd47ae1, 0x47ae148f},			/* -2.16498=f(0.32000)*/
-{10, 0,123,__LINE__, 0xc000dab2, 0xccba8b79, 0x3fd51eb8, 0x51eb8533},			/* -2.10678=f(0.33000)*/
-{10, 0,123,__LINE__, 0xc0006a8b, 0x34ef3ba2, 0x3fd5c28f, 0x5c28f5d7},			/* -2.05202=f(0.34000)*/
-{10, 0,123,__LINE__, 0xc00000cf, 0xb57b49e0, 0x3fd66666, 0x6666667b},			/* -2.00039=f(0.35000)*/
-{ 1, 0,123,__LINE__, 0xbfff39e7, 0xd5e069b9, 0x3fd70a3d, 0x70a3d71f},			/* -1.95163=f(0.36000)*/
-{ 1, 0,123,__LINE__, 0xbffe7cf5, 0xcfb6bb04, 0x3fd7ae14, 0x7ae147c3},			/* -1.90550=f(0.37000)*/
-{ 1, 0,123,__LINE__, 0xbffdc9e9, 0x84715789, 0x3fd851eb, 0x851eb867},			/* -1.86179=f(0.38000)*/
-{ 1, 0,123,__LINE__, 0xbffd1ffa, 0x532d1010, 0x3fd8f5c2, 0x8f5c290b},			/* -1.82030=f(0.39000)*/
-{ 1, 0,123,__LINE__, 0xbffc7e73, 0xa80be7b4, 0x3fd99999, 0x999999af},			/* -1.78087=f(0.40000)*/
-{ 1, 0,123,__LINE__, 0xbffbe4b3, 0x08cbc129, 0x3fda3d70, 0xa3d70a53},			/* -1.74333=f(0.41000)*/
-{ 1, 0,123,__LINE__, 0xbffb5225, 0x2d974e02, 0x3fdae147, 0xae147af7},			/* -1.70755=f(0.42000)*/
-{ 1, 0,123,__LINE__, 0xbffac644, 0xa3fbbb53, 0x3fdb851e, 0xb851eb9b},			/* -1.67340=f(0.43000)*/
-{ 1, 0,123,__LINE__, 0xbffa4098, 0x791e8810, 0x3fdc28f5, 0xc28f5c3f},			/* -1.64077=f(0.44000)*/
-{ 1, 0,123,__LINE__, 0xbff9c0b2, 0x443a9962, 0x3fdccccc, 0xcccccce3},			/* -1.60954=f(0.45000)*/
-{ 1, 0,123,__LINE__, 0xbff9462d, 0x5176d096, 0x3fdd70a3, 0xd70a3d87},			/* -1.57963=f(0.46000)*/
-{ 1, 0,123,__LINE__, 0xbff8d0ad, 0xcab18106, 0x3fde147a, 0xe147ae2b},			/* -1.55094=f(0.47000)*/
-{ 1, 0,123,__LINE__, 0xbff85fdf, 0x5afc2e9d, 0x3fdeb851, 0xeb851ecf},			/* -1.52340=f(0.48000)*/
-{ 1, 0,123,__LINE__, 0xbff7f374, 0x9b4ece25, 0x3fdf5c28, 0xf5c28f73},			/* -1.49693=f(0.49000)*/
-{ 1, 0,123,__LINE__, 0xbff78b26, 0xa14ebe4d, 0x3fe00000, 0x0000000b},			/* -1.47147=f(0.50000)*/
-{ 1, 0,123,__LINE__, 0xbff726b3, 0xef5ba82b, 0x3fe051eb, 0x851eb85d},			/* -1.44694=f(0.51000)*/
-{ 1, 0,123,__LINE__, 0xbff6c5e0, 0x27287fd4, 0x3fe0a3d7, 0x0a3d70af},			/* -1.42330=f(0.52000)*/
-{ 1, 0,123,__LINE__, 0xbff66873, 0x8b9d7d55, 0x3fe0f5c2, 0x8f5c2901},			/* -1.40050=f(0.53000)*/
-{ 1, 0,123,__LINE__, 0xbff60e3a, 0x6fb7e04d, 0x3fe147ae, 0x147ae153},			/* -1.37847=f(0.54000)*/
-{ 1, 0,123,__LINE__, 0xbff5b705, 0x5494eec7, 0x3fe19999, 0x999999a5},			/* -1.35718=f(0.55000)*/
-{ 1, 0,123,__LINE__, 0xbff562a7, 0xc8873b56, 0x3fe1eb85, 0x1eb851f7},			/* -1.33658=f(0.56000)*/
-{ 1, 0,123,__LINE__, 0xbff510f8, 0xac10341b, 0x3fe23d70, 0xa3d70a49},			/* -1.31664=f(0.57000)*/
-{ 1, 0,123,__LINE__, 0xbff4c1d1, 0xb7f254a4, 0x3fe28f5c, 0x28f5c29b},			/* -1.29731=f(0.58000)*/
-{ 1, 0,123,__LINE__, 0xbff4750f, 0x4d1c1754, 0x3fe2e147, 0xae147aed},			/* -1.27857=f(0.59000)*/
-{ 1, 0,123,__LINE__, 0xbff42a90, 0x1421761a, 0x3fe33333, 0x3333333f},			/* -1.26039=f(0.60000)*/
-{ 1, 0,123,__LINE__, 0xbff3e235, 0x495873ef, 0x3fe3851e, 0xb851eb91},			/* -1.24272=f(0.61000)*/
-{ 1, 0,123,__LINE__, 0xbff39be1, 0xdf1524d9, 0x3fe3d70a, 0x3d70a3e3},			/* -1.22555=f(0.62000)*/
-{ 1, 0,123,__LINE__, 0xbff3577a, 0xbb1a7992, 0x3fe428f5, 0xc28f5c35},			/* -1.20885=f(0.63000)*/
-{ 1, 0,123,__LINE__, 0xbff314e6, 0x836fcf3f, 0x3fe47ae1, 0x47ae1487},			/* -1.19260=f(0.64000)*/
-{ 1, 0,123,__LINE__, 0xbff2d40d, 0x77e9513f, 0x3fe4cccc, 0xccccccd9},			/* -1.17677=f(0.65000)*/
-{ 1, 0,123,__LINE__, 0xbff294d9, 0x39398046, 0x3fe51eb8, 0x51eb852b},			/* -1.16134=f(0.66000)*/
-{ 1, 0,123,__LINE__, 0xbff25735, 0x074c0d2c, 0x3fe570a3, 0xd70a3d7d},			/* -1.14629=f(0.67000)*/
-{ 1, 0,123,__LINE__, 0xbff21b0d, 0x1fe7cb73, 0x3fe5c28f, 0x5c28f5cf},			/* -1.13160=f(0.68000)*/
-{ 1, 0,123,__LINE__, 0xbff1e04f, 0x0c1f895a, 0x3fe6147a, 0xe147ae21},			/* -1.11726=f(0.69000)*/
-{ 1, 0,123,__LINE__, 0xbff1a6e9, 0x5e0f6dee, 0x3fe66666, 0x66666673},			/* -1.10325=f(0.70000)*/
-{ 1, 0,123,__LINE__, 0xbff16ecb, 0xafbeb161, 0x3fe6b851, 0xeb851ec5},			/* -1.08955=f(0.71000)*/
-{ 1, 0,123,__LINE__, 0xbff137e6, 0x7cee008e, 0x3fe70a3d, 0x70a3d717},			/* -1.07614=f(0.72000)*/
-{ 1, 0,123,__LINE__, 0xbff1022b, 0x5f391746, 0x3fe75c28, 0xf5c28f69},			/* -1.06303=f(0.73000)*/
-{ 1, 0,123,__LINE__, 0xbff0cd8c, 0x719e24e0, 0x3fe7ae14, 0x7ae147bb},			/* -1.05018=f(0.74000)*/
-{ 1, 0,123,__LINE__, 0xbff099fc, 0xbf17f408, 0x3fe80000, 0x0000000d},			/* -1.03759=f(0.75000)*/
-{ 1, 0,123,__LINE__, 0xbff0676f, 0xf6ac6964, 0x3fe851eb, 0x851eb85f},			/* -1.02525=f(0.76000)*/
-{ 1, 0,123,__LINE__, 0xbff035da, 0x791dd777, 0x3fe8a3d7, 0x0a3d70b1},			/* -1.01314=f(0.77000)*/
-{ 1, 0,123,__LINE__, 0xbff00531, 0x4452868e, 0x3fe8f5c2, 0x8f5c2903},			/* -1.00126=f(0.78000)*/
-{ 1, 0,123,__LINE__, 0xbfefaad3, 0xb5488590, 0x3fe947ae, 0x147ae155},			/* -0.98960=f(0.79000)*/
-{ 1, 0,123,__LINE__, 0xbfef4cf4, 0xfac34842, 0x3fe99999, 0x999999a7},			/* -0.97814=f(0.80000)*/
-{ 1, 0,123,__LINE__, 0xbfeef0b3, 0x7d0d0a14, 0x3fe9eb85, 0x1eb851f9},			/* -0.96688=f(0.81000)*/
-{ 1, 0,123,__LINE__, 0xbfee95fd, 0x72c13d3c, 0x3fea3d70, 0xa3d70a4b},			/* -0.95580=f(0.82000)*/
-{ 1, 0,123,__LINE__, 0xbfee3cc2, 0x02405282, 0x3fea8f5c, 0x28f5c29d},			/* -0.94491=f(0.83000)*/
-{ 1, 0,123,__LINE__, 0xbfede4f1, 0x2169e4b2, 0x3feae147, 0xae147aef},			/* -0.93419=f(0.84000)*/
-{ 1, 0,123,__LINE__, 0xbfed8e7b, 0x70eebaa2, 0x3feb3333, 0x33333341},			/* -0.92364=f(0.85000)*/
-{ 1, 0,123,__LINE__, 0xbfed3952, 0xc37c84a3, 0x3feb851e, 0xb851eb93},			/* -0.91324=f(0.86000)*/
-{ 1, 0,123,__LINE__, 0xbfece569, 0x2f8d8d89, 0x3febd70a, 0x3d70a3e5},			/* -0.90300=f(0.87000)*/
-{ 1, 0,123,__LINE__, 0xbfec92b1, 0x957f9085, 0x3fec28f5, 0xc28f5c37},			/* -0.89290=f(0.88000)*/
-{ 1, 0,123,__LINE__, 0xbfec411f, 0x90c84f96, 0x3fec7ae1, 0x47ae1489},			/* -0.88294=f(0.89000)*/
-{ 1, 0,123,__LINE__, 0xbfebf0a7, 0x385803a0, 0x3feccccc, 0xccccccdb},			/* -0.87312=f(0.90000)*/
-{ 1, 0,123,__LINE__, 0xbfeba13d, 0x149538a5, 0x3fed1eb8, 0x51eb852d},			/* -0.86343=f(0.91000)*/
-{ 1, 0,123,__LINE__, 0xbfeb52d6, 0xb49d78c1, 0x3fed70a3, 0xd70a3d7f},			/* -0.85386=f(0.92000)*/
-{ 1, 0,123,__LINE__, 0xbfeb0569, 0x9f962ef1, 0x3fedc28f, 0x5c28f5d1},			/* -0.84441=f(0.93000)*/
-{ 1, 0,123,__LINE__, 0xbfeab8ec, 0x08798c0f, 0x3fee147a, 0xe147ae23},			/* -0.83507=f(0.94000)*/
-{ 1, 0,123,__LINE__, 0xbfea6d54, 0xa670484c, 0x3fee6666, 0x66666675},			/* -0.82584=f(0.95000)*/
-{ 1, 0,123,__LINE__, 0xbfea229a, 0x8d1b4fdf, 0x3feeb851, 0xeb851ec7},			/* -0.81672=f(0.96000)*/
-{ 1, 0,123,__LINE__, 0xbfe9d8b5, 0x1279c296, 0x3fef0a3d, 0x70a3d719},			/* -0.80770=f(0.97000)*/
-{ 1, 0,123,__LINE__, 0xbfe98f9c, 0x5132eb03, 0x3fef5c28, 0xf5c28f6b},			/* -0.79878=f(0.98000)*/
-{ 1, 0,123,__LINE__, 0xbfe94748, 0x74fa8638, 0x3fefae14, 0x7ae147bd},			/* -0.78995=f(0.99000)*/
-{ 1, 0,123,__LINE__, 0xbfe8ffb2, 0x0500d76c, 0x3ff00000, 0x00000007},			/* -0.78121=f(1.00000)*/
-{ 1, 0,123,__LINE__, 0xbfe8b8d1, 0xf6b4e039, 0x3ff028f5, 0xc28f5c30},			/* -0.77256=f(1.01000)*/
-{ 1, 0,123,__LINE__, 0xbfe872a1, 0x80b50abc, 0x3ff051eb, 0x851eb859},			/* -0.76399=f(1.02000)*/
-{ 1, 0,123,__LINE__, 0xbfe82d1a, 0x2a0769e6, 0x3ff07ae1, 0x47ae1482},			/* -0.75550=f(1.03000)*/
-{ 1, 0,123,__LINE__, 0xbfe7e835, 0xc7e1c475, 0x3ff0a3d7, 0x0a3d70ab},			/* -0.74709=f(1.04000)*/
-{ 1, 0,123,__LINE__, 0xbfe7a3ee, 0x64c46067, 0x3ff0cccc, 0xccccccd4},			/* -0.73876=f(1.05000)*/
-{ 1, 0,123,__LINE__, 0xbfe7603e, 0x5b89fec6, 0x3ff0f5c2, 0x8f5c28fd},			/* -0.73049=f(1.06000)*/
-{ 1, 0,123,__LINE__, 0xbfe71d20, 0x14b064ca, 0x3ff11eb8, 0x51eb8526},			/* -0.72230=f(1.07000)*/
-{ 1, 0,123,__LINE__, 0xbfe6da8e, 0xc246ed18, 0x3ff147ae, 0x147ae14f},			/* -0.71417=f(1.08000)*/
-{ 1, 0,123,__LINE__, 0xbfe69885, 0x40ffdd26, 0x3ff170a3, 0xd70a3d78},			/* -0.70611=f(1.09000)*/
-{ 1, 0,123,__LINE__, 0xbfe656fe, 0xcc5e5f1b, 0x3ff19999, 0x999999a1},			/* -0.69811=f(1.10000)*/
-{ 1, 0,123,__LINE__, 0xbfe615f6, 0xdddba6f2, 0x3ff1c28f, 0x5c28f5ca},			/* -0.69018=f(1.11000)*/
-{ 1, 0,123,__LINE__, 0xbfe5d569, 0x1a0bb056, 0x3ff1eb85, 0x1eb851f3},			/* -0.68230=f(1.12000)*/
-{ 1, 0,123,__LINE__, 0xbfe59551, 0x60024644, 0x3ff2147a, 0xe147ae1c},			/* -0.67447=f(1.13000)*/
-{ 1, 0,123,__LINE__, 0xbfe555ab, 0xa2d085db, 0x3ff23d70, 0xa3d70a45},			/* -0.66670=f(1.14000)*/
-{ 1, 0,123,__LINE__, 0xbfe51674, 0x20b37355, 0x3ff26666, 0x6666666e},			/* -0.65899=f(1.15000)*/
-{ 1, 0,123,__LINE__, 0xbfe4d7a7, 0x333b278a, 0x3ff28f5c, 0x28f5c297},			/* -0.65132=f(1.16000)*/
-{ 1, 0,123,__LINE__, 0xbfe49941, 0x5c040ab4, 0x3ff2b851, 0xeb851ec0},			/* -0.64370=f(1.17000)*/
-{ 1, 0,123,__LINE__, 0xbfe45b3f, 0x3dd3b5ca, 0x3ff2e147, 0xae147ae9},			/* -0.63613=f(1.18000)*/
-{ 1, 0,123,__LINE__, 0xbfe41d9d, 0x71471f82, 0x3ff30a3d, 0x70a3d712},			/* -0.62861=f(1.19000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01921fb, 0x54442d18},			/* 64.0000=f(-6.28318)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc012d97c, 0x7f3321d2},			/* 64.0000=f(-4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc00921fb, 0x54442d18},			/* 64.0000=f(-3.14159)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff921fb, 0x54442d18},			/* 64.0000=f(-1.57079)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0x00000000, 0x00000000},			/* 64.0000=f(0.00000)*/
-{ 1, 0,123,__LINE__, 0xbfd77123, 0x3c9f8927, 0x3ff921fb, 0x54442d18},			/* -0.36628=f(1.57079)*/
-{ 0, 0,123,__LINE__, 0x3fd6f7c6, 0x3e78d349, 0x400921fb, 0x54442d18},			/* 0.35887=f(3.14159)*/
-{ 0, 0,123,__LINE__, 0x3fced109, 0x2d70aba0, 0x4012d97c, 0x7f3321d2},			/* 0.24075=f(4.71238)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03e0000, 0x00000000},			/* 64.0000=f(-30.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03c4ccc, 0xcccccccd},			/* 64.0000=f(-28.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc03a9999, 0x9999999a},			/* 64.0000=f(-26.6000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc038e666, 0x66666667},			/* 64.0000=f(-24.9000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0373333, 0x33333334},			/* 64.0000=f(-23.2000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0358000, 0x00000001},			/* 64.0000=f(-21.5000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc033cccc, 0xccccccce},			/* 64.0000=f(-19.8000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0321999, 0x9999999b},			/* 64.0000=f(-18.1000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0306666, 0x66666668},			/* 64.0000=f(-16.4000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02d6666, 0x6666666a},			/* 64.0000=f(-14.7000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc02a0000, 0x00000004},			/* 64.0000=f(-13.0000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0269999, 0x9999999e},			/* 64.0000=f(-11.3000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0233333, 0x33333338},			/* 64.0000=f(-9.60000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc01f9999, 0x999999a3},			/* 64.0000=f(-7.90000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc018cccc, 0xccccccd6},			/* 64.0000=f(-6.20000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0120000, 0x00000009},			/* 64.0000=f(-4.50000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xc0066666, 0x66666678},			/* 64.0000=f(-2.80000)*/
-{ 9,13, 37,__LINE__, 0x40500000, 0x00000000, 0xbff19999, 0x999999bd},			/* 64.0000=f(-1.10000)*/
-{ 1, 0,123,__LINE__, 0xbff42a90, 0x1421761a, 0x3fe33333, 0x333332ec},			/* -1.26039=f(0.60000)*/
-{ 9, 0,123,__LINE__, 0x3faac416, 0xb11a9d9c, 0x40026666, 0x66666654},			/* 0.05227=f(2.30000)*/
-{10, 0,123,__LINE__, 0x3fd9779e, 0x3e516ea4, 0x400fffff, 0xffffffee},			/* 0.39792=f(4.00000)*/
-{ 0, 0,123,__LINE__, 0xbfb6b690, 0x22bce510, 0x4016cccc, 0xccccccc4},			/* -0.08872=f(5.70000)*/
-{10, 0,123,__LINE__, 0xbfd17ab8, 0x4f3ea7b6, 0x401d9999, 0x99999991},			/* -0.27311=f(7.40000)*/
-{10, 0,123,__LINE__, 0x3fc050cd, 0xbb05f210, 0x40223333, 0x3333332f},			/* 0.12746=f(9.10000)*/
-{10, 0,123,__LINE__, 0x3fc940c4, 0xc40306ca, 0x40259999, 0x99999995},			/* 0.19728=f(10.8000)*/
-{10, 0,123,__LINE__, 0xbfc3b0f8, 0xb4d679af, 0x4028ffff, 0xfffffffb},			/* -0.15383=f(12.5000)*/
-{ 0, 0,123,__LINE__, 0xbfc165b1, 0x7aaa9cc0, 0x402c6666, 0x66666661},			/* -0.13591=f(14.2000)*/
-{ 0, 0,123,__LINE__, 0x3fc594e4, 0xa6fcd009, 0x402fcccc, 0xccccccc7},			/* 0.16860=f(15.9000)*/
-{ 0, 0,123,__LINE__, 0x3fb4e0ac, 0x39a1ab2c, 0x40319999, 0x99999997},			/* 0.08155=f(17.6000)*/
-{10, 0,123,__LINE__, 0xbfc61c4c, 0x79f54028, 0x40334ccc, 0xccccccca},			/* -0.17273=f(19.3000)*/
-{ 0, 0,123,__LINE__, 0xbfa0a8f9, 0x04feeeb9, 0x4034ffff, 0xfffffffd},			/* -0.03253=f(21.0000)*/
-{ 0, 0,123,__LINE__, 0x3fc567a2, 0x087fa337, 0x4036b333, 0x33333330},			/* 0.16722=f(22.7000)*/
-{ 0, 0,123,__LINE__, 0xbf867d4c, 0x44499f34, 0x40386666, 0x66666663},			/* -0.01098=f(24.4000)*/
-{ 0, 0,123,__LINE__, 0xbfc39cd0, 0xaae8ac82, 0x403a1999, 0x99999996},			/* -0.15322=f(26.1000)*/
-{ 0, 0,123,__LINE__, 0x3fa8b668, 0xc801a7a1, 0x403bcccc, 0xccccccc9},			/* 0.04826=f(27.8000)*/
-{11, 0,123,__LINE__, 0x3fc0e92a, 0xfe6b2ee0, 0x403d7fff, 0xfffffffc},			/* 0.13211=f(29.5000)*/
-0,};
-test_y1f(m)   {run_vector_1(m,y1f_vec,(char *)(y1f),"y1f","ff");   }	
diff --git a/newlib/libm/test/yn_vec.c b/newlib/libm/test/yn_vec.c
deleted file mode 100644
index 69028531e..000000000
--- a/newlib/libm/test/yn_vec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-#include "test.h"
- one_line_type yn_vec[] = {
-{64,0,123,__LINE__, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-{64,0,123,__LINE__, 0x00000000, 0x00000000, 0x3ff00000, 0x00000000, 0x00000000, 0x00000000},
-{64,0,123,__LINE__, 0x00000000, 0x00000000, 0x40000000, 0x00000000, 0x00000000, 0x00000000},
-{64,0,123,__LINE__, 0x00000000, 0x00000000, 0x40080000, 0x00000000, 0x00000000, 0x00000000},
-{64,0,123,__LINE__, 0x00000000, 0x00000000, 0x40100000, 0x00000000, 0x00000000, 0x00000000},
-{64,0,123,__LINE__, 0x3feffae1, 0x7c1aebb8, 0x00000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3f99978d, 0x5dda2f5d, 0x3ff00000, 0x00000000, 0x3fa99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3f3479c9, 0xae7be13e, 0x40000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3ec5d788, 0x15461382, 0x40080000, 0x00000000, 0x3fa99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3e51795d, 0x7442f11f, 0x40100000, 0x00000000, 0x3fa99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3fefeb88, 0x65590ab3, 0x00000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3fa99169, 0x52566dfd, 0x3ff00000, 0x00000000, 0x3fb99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3f547683, 0x25fd91e1, 0x40000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3ef5d4e9, 0x3442db3c, 0x40080000, 0x00000000, 0x3fb99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3e9177b0, 0x11ba6ea0, 0x40100000, 0x00000000, 0x3fb99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3fefd1fc, 0x19331411, 0x00000000, 0x00000000, 0x3fc33333, 0x33333334},
-{64,0,123,__LINE__, 0x3fb32563, 0x927c0add, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333334},
-{64,0,123,__LINE__, 0x3f66ff30, 0x46535fa1, 0x40000000, 0x00000000, 0x3fc33333, 0x33333334},
-{64,0,123,__LINE__, 0x3f1267f5, 0xd0689e2d, 0x40080000, 0x00000000, 0x3fc33333, 0x33333334},
-{64,0,123,__LINE__, 0x3eb617f1, 0x7b30b575, 0x40100000, 0x00000000, 0x3fc33333, 0x33333334},
-{64,0,123,__LINE__, 0x3fefae48, 0xd9bfc0d4, 0x00000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3fb978e2, 0xf61c3bd6, 0x3ff00000, 0x00000000, 0x3fc99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3f74696c, 0xf1c4fb46, 0x40000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3f25ca70, 0x33fc81fd, 0x40080000, 0x00000000, 0x3fc99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3ed170fb, 0xdefa5db8, 0x40100000, 0x00000000, 0x3fc99999, 0x9999999a},
-{64,0,123,__LINE__, 0x3fef807f, 0xc72aa864, 0x00000000, 0x00000000, 0x3fd00000, 0x00000000},
-{64,0,123,__LINE__, 0x3fbfc02a, 0x9c749ee9, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000000},
-{64,0,123,__LINE__, 0x3f7fd56a, 0xa4fb4242, 0x40000000, 0x00000000, 0x3fd00000, 0x00000000},
-{64,0,123,__LINE__, 0x3f354008, 0x86a35a2f, 0x40080000, 0x00000000, 0x3fd00000, 0x00000000},
-{64,0,123,__LINE__, 0x3ee54449, 0xf38a05f2, 0x40100000, 0x00000000, 0x3fd00000, 0x00000000},
-{64,0,123,__LINE__, 0x3fef48b6, 0xd692fb9e, 0x00000000, 0x00000000, 0x3fd33333, 0x33333333},
-{64,0,123,__LINE__, 0x3fc2fc1c, 0x68a32001, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333333},
-{64,0,123,__LINE__, 0x3f86de20, 0x9f39196e, 0x40000000, 0x00000000, 0x3fd33333, 0x33333333},
-{64,0,123,__LINE__, 0x3f42541c, 0x0c752fd9, 0x40080000, 0x00000000, 0x3fd33333, 0x33333333},
-{64,0,123,__LINE__, 0x3ef604e0, 0xb2c4c00a, 0x40100000, 0x00000000, 0x3fd33333, 0x33333333},
-{64,0,123,__LINE__, 0x3fef0708, 0xc6573ae5, 0x00000000, 0x00000000, 0x3fd66666, 0x66666666},
-{64,0,123,__LINE__, 0x3fc60f09, 0xfed3cc81, 0x3ff00000, 0x00000000, 0x3fd66666, 0x66666666},
-{64,0,123,__LINE__, 0x3f8f0a84, 0xda6806f7, 0x40000000, 0x00000000, 0x3fd66666, 0x66666666},
-{64,0,123,__LINE__, 0x3f4d0bc1, 0xbfa630ab, 0x40080000, 0x00000000, 0x3fd66666, 0x66666666},
-{64,0,123,__LINE__, 0x3f045d05, 0x37bf774c, 0x40100000, 0x00000000, 0x3fd66666, 0x66666666},
-{64,0,123,__LINE__, 0x3feebb95, 0x0fd4747f, 0x00000000, 0x00000000, 0x3fd99999, 0x99999999},
-{64,0,123,__LINE__, 0x3fc91766, 0x1ebb8177, 0x3ff00000, 0x00000000, 0x3fd99999, 0x99999999},
-{64,0,123,__LINE__, 0x3f943552, 0xd2bdaaf3, 0x40000000, 0x00000000, 0x3fd99999, 0x99999999},
-{64,0,123,__LINE__, 0x3f55a0b4, 0x58ca1be8, 0x40080000, 0x00000000, 0x3fd99999, 0x99999999},
-{64,0,123,__LINE__, 0x3f115640, 0x7fcf3789, 0x40100000, 0x00000000, 0x3fd99999, 0x99999999},
-{64,0,123,__LINE__, 0x3fee667f, 0xd6a10561, 0x00000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{64,0,123,__LINE__, 0x3fcc13be, 0x77afcc52, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{64,0,123,__LINE__, 0x3f997c40, 0x76110a23, 0x40000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{64,0,123,__LINE__, 0x3f5eb65b, 0x151f786c, 0x40080000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{64,0,123,__LINE__, 0x3f1bb61b, 0x892f8cff, 0x40100000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{64,0,123,__LINE__, 0x3fee07f1, 0xd54c3f35, 0x00000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{64,0,123,__LINE__, 0x3fcf02a7, 0x1f4870d6, 0x3ff00000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{64,0,123,__LINE__, 0x3f9f56a9, 0x3f863441, 0x40000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{64,0,123,__LINE__, 0x3f650088, 0x0f70db57, 0x40080000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{64,0,123,__LINE__, 0x3f25116b, 0xd18a61a9, 0x40100000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{64,0,123,__LINE__, 0x3feda018, 0x47adb931, 0x00000000, 0x00000000, 0x3fe19999, 0x99999999},
-{64,0,123,__LINE__, 0x3fd0f15d, 0xa9534f53, 0x3ff00000, 0x00000000, 0x3fe19999, 0x99999999},
-{64,0,123,__LINE__, 0x3fa2e066, 0x08ca87ed, 0x40000000, 0x00000000, 0x3fe19999, 0x99999999},
-{64,0,123,__LINE__, 0x3f6bdca3, 0xb2679435, 0x40080000, 0x00000000, 0x3fe19999, 0x99999999},
-{64,0,123,__LINE__, 0x3f2ec3c2, 0x4d8baa6f, 0x40100000, 0x00000000, 0x3fe19999, 0x99999999},
-{64,0,123,__LINE__, 0x3fed2f24, 0xd2d06e4e, 0x00000000, 0x00000000, 0x3fe33333, 0x33333333},
-{64,0,123,__LINE__, 0x3fd2594f, 0x19ddc92f, 0x3ff00000, 0x00000000, 0x3fe33333, 0x33333333},
-{64,0,123,__LINE__, 0x3fa65b45, 0x84be102a, 0x40000000, 0x00000000, 0x3fe33333, 0x33333333},
-{64,0,123,__LINE__, 0x3f72055f, 0xdad11213, 0x40080000, 0x00000000, 0x3fe33333, 0x33333333},
-{64,0,123,__LINE__, 0x3f35b926, 0x63a336fb, 0x40100000, 0x00000000, 0x3fe33333, 0x33333333},
-{64,0,123,__LINE__, 0x3fecb54d, 0x6a872136, 0x00000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{64,0,123,__LINE__, 0x3fd3b87d, 0xc1127dbb, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{64,0,123,__LINE__, 0x3faa19b6, 0xfbcb3e9a, 0x40000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{64,0,123,__LINE__, 0x3f76d285, 0x13b1873b, 0x40080000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{64,0,123,__LINE__, 0x3f3dd3be, 0xb2075517, 0x40100000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{64,0,123,__LINE__, 0x3fec32cc, 0x34b8cc59, 0x00000000, 0x00000000, 0x3fe66666, 0x66666667},
-{64,0,123,__LINE__, 0x3fd50e44, 0x279c0546, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666667},
-{64,0,123,__LINE__, 0x3fae1952, 0x86f3b2fe, 0x40000000, 0x00000000, 0x3fe66666, 0x66666667},
-{64,0,123,__LINE__, 0x3f7c6245, 0x0da7c943, 0x40080000, 0x00000000, 0x3fe66666, 0x66666667},
-{64,0,123,__LINE__, 0x3f43fddd, 0x592928af, 0x40100000, 0x00000000, 0x3fe66666, 0x66666667},
-{64,0,123,__LINE__, 0x3feba7df, 0x6a752a19, 0x00000000, 0x00000000, 0x3fe80000, 0x00000001},
-{64,0,123,__LINE__, 0x3fd65a01, 0xd66b68bd, 0x3ff00000, 0x00000000, 0x3fe80000, 0x00000001},
-{64,0,123,__LINE__, 0x3fb12bc2, 0xf0d061c1, 0x40000000, 0x00000000, 0x3fe80000, 0x00000001},
-{64,0,123,__LINE__, 0x3f816042, 0xaaa332db, 0x40080000, 0x00000000, 0x3fe80000, 0x00000001},
-{64,0,123,__LINE__, 0x3f4a3fdc, 0xe9688cf6, 0x40100000, 0x00000000, 0x3fe80000, 0x00000001},
-{64,0,123,__LINE__, 0x3feb14c9, 0x36e29d84, 0x00000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fd79b1b, 0xab574ece, 0x3ff00000, 0x00000000, 0x3fe99999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fb368ca, 0xfa5427de, 0x40000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{64,0,123,__LINE__, 0x3f84fc41, 0xb23c60e3, 0x40080000, 0x00000000, 0x3fe99999, 0x9999999b},
-{64,0,123,__LINE__, 0x3f50eca7, 0x311cbd4c, 0x40100000, 0x00000000, 0x3fe99999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fea79cf, 0x9417f64a, 0x00000000, 0x00000000, 0x3feb3333, 0x33333335},
-{64,0,123,__LINE__, 0x3fd8d0fc, 0x2ac09609, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333335},
-{64,0,123,__LINE__, 0x3fb5c250, 0x3ceb775b, 0x40000000, 0x00000000, 0x3feb3333, 0x33333335},
-{64,0,123,__LINE__, 0x3f890a65, 0x7f429003, 0x40080000, 0x00000000, 0x3feb3333, 0x33333335},
-{64,0,123,__LINE__, 0x3f557acc, 0xd794bfe8, 0x40100000, 0x00000000, 0x3feb3333, 0x33333335},
-{64,0,123,__LINE__, 0x3fe9d73c, 0x25f5b277, 0x00000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fd9fb13, 0xce0f024e, 0x3ff00000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fb836ce, 0xdb8280b1, 0x40000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3f8d8f96, 0x8206eb0e, 0x40080000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3f5ae0f9, 0x8b7b7574, 0x40100000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fe92d5c, 0x13137d0b, 0x00000000, 0x00000000, 0x3fee6666, 0x66666669},
-{64,0,123,__LINE__, 0x3fdb18d9, 0x4eda7476, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666669},
-{64,0,123,__LINE__, 0x3fbac4b1, 0x27d714b1, 0x40000000, 0x00000000, 0x3fee6666, 0x66666669},
-{64,0,123,__LINE__, 0x3f91482d, 0xb156b6bd, 0x40080000, 0x00000000, 0x3fee6666, 0x66666669},
-{64,0,123,__LINE__, 0x3f609b4b, 0x7ea68879, 0x40100000, 0x00000000, 0x3fee6666, 0x66666669},
-{64,0,123,__LINE__, 0x3fe87c7f, 0xdbd7b8ee, 0x00000000, 0x00000000, 0x3ff00000, 0x00000001},
-{64,0,123,__LINE__, 0x3fdc29c9, 0xee970c6e, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000001},
-{64,0,123,__LINE__, 0x3fbd6a50, 0x95fa9be9, 0x40000000, 0x00000000, 0x3ff00000, 0x00000001},
-{64,0,123,__LINE__, 0x3f94086a, 0x7638f7a6, 0x40080000, 0x00000000, 0x3ff00000, 0x00000001},
-{64,0,123,__LINE__, 0x3f6449e3, 0x6b5af1b3, 0x40100000, 0x00000000, 0x3ff00000, 0x00000001},
-{64,0,123,__LINE__, 0x3fe7c4fb, 0x2fcfebef, 0x00000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{64,0,123,__LINE__, 0x3fdd2d69, 0xba9c976c, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{64,0,123,__LINE__, 0x3fc012fb, 0x5cfc78b3, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{64,0,123,__LINE__, 0x3f970a5d, 0x1eef9226, 0x40080000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{64,0,123,__LINE__, 0x3f6888a5, 0x228510b7, 0x40100000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{64,0,123,__LINE__, 0x3fe70724, 0xc161d44c, 0x00000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fde2343, 0xcc63c37e, 0x3ff00000, 0x00000000, 0x3ff19999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fc17aef, 0x27865e62, 0x40000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{64,0,123,__LINE__, 0x3f9a4faa, 0xa04e8191, 0x40080000, 0x00000000, 0x3ff19999, 0x9999999b},
-{64,0,123,__LINE__, 0x3f6d6434, 0x5a55c316, 0x40100000, 0x00000000, 0x3ff19999, 0x9999999b},
-{64,0,123,__LINE__, 0x3fe64356, 0x17eddc81, 0x00000000, 0x00000000, 0x3ff26666, 0x66666668},
-{64,0,123,__LINE__, 0x3fdf0aea, 0x85d5bf18, 0x3ff00000, 0x00000000, 0x3ff26666, 0x66666668},
-{64,0,123,__LINE__, 0x3fc2ec1a, 0x23e21b78, 0x40000000, 0x00000000, 0x3ff26666, 0x66666668},
-{64,0,123,__LINE__, 0x3f9dd9bf, 0xb5a70ade, 0x40080000, 0x00000000, 0x3ff26666, 0x66666668},
-{64,0,123,__LINE__, 0x3f7174b5, 0x74230428, 0x40100000, 0x00000000, 0x3ff26666, 0x66666668},
-{64,0,123,__LINE__, 0x3fe579eb, 0x607c7c41, 0x00000000, 0x00000000, 0x3ff33333, 0x33333335},
-{64,0,123,__LINE__, 0x3fdfe3f7, 0xc98d2caf, 0x3ff00000, 0x00000000, 0x3ff33333, 0x33333335},
-{64,0,123,__LINE__, 0x3fc4658c, 0x7339f932, 0x40000000, 0x00000000, 0x3ff33333, 0x33333335},
-{64,0,123,__LINE__, 0x3fa0d4e7, 0xb3f0ea6f, 0x40080000, 0x00000000, 0x3ff33333, 0x33333335},
-{64,0,123,__LINE__, 0x3f7492a5, 0xb6657ad7, 0x40100000, 0x00000000, 0x3ff33333, 0x33333335},
-{64,0,123,__LINE__, 0x3fe4ab43, 0x3d10e1be, 0x00000000, 0x00000000, 0x3ff40000, 0x00000002},
-{64,0,123,__LINE__, 0x3fe05706, 0x9774d334, 0x3ff00000, 0x00000000, 0x3ff40000, 0x00000002},
-{64,0,123,__LINE__, 0x3fc5e650, 0x6ea82715, 0x40000000, 0x00000000, 0x3ff40000, 0x00000002},
-{64,0,123,__LINE__, 0x3fa2e068, 0xdde7f41d, 0x40080000, 0x00000000, 0x3ff40000, 0x00000002},
-{64,0,123,__LINE__, 0x3f781279, 0xda92ee2f, 0x40100000, 0x00000000, 0x3ff40000, 0x00000002},
-{64,0,123,__LINE__, 0x3fe3d7be, 0x92bbfbb9, 0x00000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fe0b46a, 0x18ecb9d4, 0x3ff00000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fc76d6b, 0x3ac0d75b, 0x40000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fa50fc1, 0x44526e78, 0x40080000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3f7bfac7, 0x6edc65a7, 0x40100000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{64,0,123,__LINE__, 0x3fe2ffc0, 0x568baaa2, 0x00000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{64,0,123,__LINE__, 0x3fe109ff, 0x2f1fc3ec, 0x3ff00000, 0x00000000, 0x3ff59999, 0x9999999c},
-{64,0,123,__LINE__, 0x3fc8f9dd, 0x5e41b884, 0x40000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{64,0,123,__LINE__, 0x3fa76330, 0x3bb95571, 0x40080000, 0x00000000, 0x3ff59999, 0x9999999c},
-{64,0,123,__LINE__, 0x3f802911, 0xcfdfbbf5, 0x40100000, 0x00000000, 0x3ff59999, 0x9999999c},
-{64,0,123,__LINE__, 0x3fe223ad, 0x59727c9e, 0x00000000, 0x00000000, 0x3ff66666, 0x66666669},
-{64,0,123,__LINE__, 0x3fe157a2, 0xbb6f3312, 0x3ff00000, 0x00000000, 0x3ff66666, 0x66666669},
-{64,0,123,__LINE__, 0x3fca8aa3, 0x5b8ce82e, 0x40000000, 0x00000000, 0x3ff66666, 0x66666669},
-{64,0,123,__LINE__, 0x3fa9dad6, 0x163299ee, 0x40080000, 0x00000000, 0x3ff66666, 0x66666669},
-{64,0,123,__LINE__, 0x3f828f8e, 0x0cde14e4, 0x40100000, 0x00000000, 0x3ff66666, 0x66666669},
-{64,0,123,__LINE__, 0x3fe143ec, 0x1344e613, 0x00000000, 0x00000000, 0x3ff73333, 0x33333336},
-{64,0,123,__LINE__, 0x3fe19d35, 0xcbd98b75, 0x3ff00000, 0x00000000, 0x3ff73333, 0x33333336},
-{64,0,123,__LINE__, 0x3fcc1eb6, 0x4c93d2fc, 0x40000000, 0x00000000, 0x3ff73333, 0x33333336},
-{64,0,123,__LINE__, 0x3fac76b3, 0xcd3060b1, 0x40080000, 0x00000000, 0x3ff73333, 0x33333336},
-{64,0,123,__LINE__, 0x3f853417, 0xedc03cbe, 0x40100000, 0x00000000, 0x3ff73333, 0x33333336},
-{64,0,123,__LINE__, 0x3fe060e4, 0x6ce96517, 0x00000000, 0x00000000, 0x3ff80000, 0x00000003},
-{64,0,123,__LINE__, 0x3fe1da9d, 0xa9d6fc82, 0x3ff00000, 0x00000000, 0x3ff80000, 0x00000003},
-{64,0,123,__LINE__, 0x3fcdb50c, 0x80d5039f, 0x40000000, 0x00000000, 0x3ff80000, 0x00000003},
-{64,0,123,__LINE__, 0x3faf36aa, 0xc0c5b3bb, 0x40080000, 0x00000000, 0x3ff80000, 0x00000003},
-{64,0,123,__LINE__, 0x3f8819e3, 0xff0b0187, 0x40100000, 0x00000000, 0x3ff80000, 0x00000003},
-{64,0,123,__LINE__, 0x3fdef5ff, 0x13b2d492, 0x00000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{64,0,123,__LINE__, 0x3fe20fc3, 0xe6dcf000, 0x3ff00000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{64,0,123,__LINE__, 0x3fcf4c9a, 0x1d0ea964, 0x40000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{64,0,123,__LINE__, 0x3fb10d3e, 0x464b660f, 0x40080000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{64,0,123,__LINE__, 0x3f8b4418, 0x3c555ec0, 0x40100000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{64,0,123,__LINE__, 0x3fdd254f, 0x22227934, 0x00000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{64,0,123,__LINE__, 0x3fe23c96, 0x66824fe1, 0x3ff00000, 0x00000000, 0x3ff99999, 0x9999999d},
-{64,0,123,__LINE__, 0x3fd07228, 0xde234e77, 0x40000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{64,0,123,__LINE__, 0x3fb290e5, 0x794e918a, 0x40080000, 0x00000000, 0x3ff99999, 0x9999999d},
-{64,0,123,__LINE__, 0x3f8eb5c8, 0x72cb3f07, 0x40100000, 0x00000000, 0x3ff99999, 0x9999999d},
-{64,0,123,__LINE__, 0x3fdb508e, 0xeb1aae8c, 0x00000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{64,0,123,__LINE__, 0x3fe26107, 0x663f6e91, 0x3ff00000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{64,0,123,__LINE__, 0x3fd13d92, 0x88e3f0dd, 0x40000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{64,0,123,__LINE__, 0x3fb4260b, 0xedecb2c7, 0x40080000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{64,0,123,__LINE__, 0x3f9138f9, 0x5390ebd3, 0x40100000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{64,0,123,__LINE__, 0x3fd97895, 0x7ce7f2cf, 0x00000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{64,0,123,__LINE__, 0x3fe27d0d, 0x82c5db53, 0x3ff00000, 0x00000000, 0x3ffb3333, 0x33333337},
-{64,0,123,__LINE__, 0x3fd20802, 0xc5da89b2, 0x40000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{64,0,123,__LINE__, 0x3fb5cc62, 0xb77f9eb0, 0x40080000, 0x00000000, 0x3ffb3333, 0x33333337},
-{64,0,123,__LINE__, 0x3f933dbd, 0xc0e89d76, 0x40100000, 0x00000000, 0x3ffb3333, 0x33333337},
-{64,0,123,__LINE__, 0x3fd79e3a, 0x9e138ae6, 0x00000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{64,0,123,__LINE__, 0x3fe290a3, 0xbaedcc46, 0x3ff00000, 0x00000000, 0x3ffc0000, 0x00000004},
-{64,0,123,__LINE__, 0x3fd2d0f2, 0x7ae76c8a, 0x40000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{64,0,123,__LINE__, 0x3fb7838b, 0x1e8c5990, 0x40080000, 0x00000000, 0x3ffc0000, 0x00000004},
-{64,0,123,__LINE__, 0x3f956a95, 0x623295f7, 0x40100000, 0x00000000, 0x3ffc0000, 0x00000004},
-{64,0,123,__LINE__, 0x3fd5c256, 0x5d20c7de, 0x00000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{64,0,123,__LINE__, 0x3fe29bc9, 0x703828ac, 0x3ff00000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{64,0,123,__LINE__, 0x3fd397db, 0x0e06aef0, 0x40000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{64,0,123,__LINE__, 0x3fb94b16, 0xc2085bbd, 0x40080000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{64,0,123,__LINE__, 0x3f97c0d3, 0xe559d7ff, 0x40100000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{64,0,123,__LINE__, 0x3fd3e5c0, 0xa05c4025, 0x00000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{64,0,123,__LINE__, 0x3fe29e82, 0x64e59f5a, 0x3ff00000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{64,0,123,__LINE__, 0x3fd45c36, 0xb655f5cb, 0x40000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{64,0,123,__LINE__, 0x3fbb2287, 0xc3831b75, 0x40080000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{64,0,123,__LINE__, 0x3f9a41bb, 0x0d6129f8, 0x40100000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{64,0,123,__LINE__, 0x3fd20950, 0xb5facde5, 0x00000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{64,0,123,__LINE__, 0x3fe298d6, 0xb7a495db, 0x3ff00000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{64,0,123,__LINE__, 0x3fd51d80, 0xcca30f3c, 0x40000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{64,0,123,__LINE__, 0x3fbd0950, 0xfe1d8095, 0x40080000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{64,0,123,__LINE__, 0x3f9cee79, 0x030dd010, 0x40100000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{64,0,123,__LINE__, 0x3fd02ddc, 0xe4c5e3e8, 0x00000000, 0x00000000, 0x3fff3333, 0x33333338},
-{64,0,123,__LINE__, 0x3fe28ad2, 0xdcd91caf, 0x3ff00000, 0x00000000, 0x3fff3333, 0x33333338},
-{64,0,123,__LINE__, 0x3fd5db36, 0x1b535d7a, 0x40000000, 0x00000000, 0x3fff3333, 0x33333338},
-{64,0,123,__LINE__, 0x3fbefed6, 0x4831e4df, 0x40080000, 0x00000000, 0x3fff3333, 0x33333338},
-{64,0,123,__LINE__, 0x3f9fc826, 0xafa66438, 0x40100000, 0x00000000, 0x3fff3333, 0x33333338},
-0,};
-test_yn(m)   {run_vector_1(m,yn_vec,(char *)(yn),"yn","did");   }	
diff --git a/newlib/libm/test/ynf_vec.c b/newlib/libm/test/ynf_vec.c
deleted file mode 100644
index edd0d1718..000000000
--- a/newlib/libm/test/ynf_vec.c
+++ /dev/null
@@ -1,199 +0,0 @@
-#include "test.h"
- one_line_type ynf_vec[] = {
-
-{32,0,123,__LINE__, 0xbfffab42, 0x0311f796, 0x00000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc0299467, 0xe5a18bc5, 0x3ff00000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc07fd9d6, 0x9d06dcbe, 0x40000000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc0e3e68c, 0xdba5efde, 0x40080000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc152a7a4, 0xa6911cc5, 0x40100000, 0x00000000, 0x3fa99999, 0x9999999a},
-{32,0,123,__LINE__, 0xbff88c3d, 0xd3fcf18c, 0x00000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc019d5f7, 0x4698d59d, 0x3ff00000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc05fe944, 0x20ef173e, 0x40000000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc0b3eb55, 0x16c3c852, 0x40080000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc112aaa1, 0x31157cdc, 0x40100000, 0x00000000, 0x3fb99999, 0x9999999a},
-{32,0,123,__LINE__, 0xbff45519, 0x9a9aa247, 0x00000000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0xc0117469, 0x70206678, 0x3ff00000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0xc04c74b1, 0x98b68060, 0x40000000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0xc097a51f, 0x95d29fe9, 0x40080000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0xc0ed874a, 0x4ee11a42, 0x40100000, 0x00000000, 0x3fc33333, 0x33333334},
-{32,0,123,__LINE__, 0xbff14c35, 0x1831ea96, 0x00000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc00a9731, 0x8e2c8b35, 0x3ff00000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc040141d, 0x501a47ac, 0x40000000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc083fe8d, 0x7292ad0c, 0x40080000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0xc0d2b69a, 0x8cc17517, 0x40100000, 0x00000000, 0x3fc99999, 0x9999999a},
-{32,0,123,__LINE__, 0xbfedcf72, 0x3b7d21f4, 0x00000000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0xc005a201, 0xec26d052, 0x3ff00000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0xc034b386, 0x5a4ae742, 0x40000000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0748842, 0x567299a1, 0x40080000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0xc0beb7af, 0xfb519b8b, 0x40100000, 0x00000000, 0x3fd00000, 0x00000000},
-{32,0,123,__LINE__, 0xbfe9d52f, 0x65f30ce4, 0x00000000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0xc0025847, 0x81bd58a7, 0x3ff00000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0xc02cf5ce, 0xe1dc62f3, 0x40000000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0xc067d8cb, 0x48db5d12, 0x40080000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0xc0adb208, 0x4c3057f3, 0x40100000, 0x00000000, 0x3fd33333, 0x33333333},
-{32,0,123,__LINE__, 0xbfe668f8, 0x269cb98f, 0x00000000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0xc00000cf, 0xb133ffa1, 0x3ff00000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0xc0257606, 0xe872c629, 0x40000000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0xc05e2895, 0xa9f5c43e, 0x40080000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0xc0a01291, 0x01db365b, 0x40100000, 0x00000000, 0x3fd66666, 0x66666666},
-{32,0,123,__LINE__, 0xbfe3648d, 0xa2beedbd, 0x00000000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0xbffc7e73, 0xaf480232, 0x3ff00000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0xc02098bf, 0x73611283, 0x40000000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0xc0544cf5, 0x817c371b, 0x40080000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0xc092e6f4, 0xaa7db185, 0x40100000, 0x00000000, 0x3fd99999, 0x99999999},
-{32,0,123,__LINE__, 0xbfe0af8a, 0xa64cf8b1, 0x00000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xbff9c0b2, 0x3c24181f, 0x3ff00000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc01a8746, 0x7c4209f0, 0x40000000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc04cabd6, 0xf82f5c11, 0x40080000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xc087af79, 0xec8448a5, 0x40100000, 0x00000000, 0x3fdccccc, 0xcccccccc},
-{32,0,123,__LINE__, 0xbfdc72fe, 0xb3b7b8a4, 0x00000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0xbff78b26, 0xa2b7c4e0, 0x3ff00000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0xc015c3f6, 0xb77c4957, 0x40000000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0xc045079d, 0x82668b31, 0x40080000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0xc07f345c, 0x68bbdfa6, 0x40100000, 0x00000000, 0x3fdfffff, 0xffffffff},
-{32,0,123,__LINE__, 0xbfd7edc1, 0xa5c74a03, 0x00000000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0xbff5b705, 0x5ba816d7, 0x3ff00000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0xc0123ecb, 0xad53a024, 0x40000000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0xc03fd0ea, 0xb6dd8a79, 0x40080000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0xc075685f, 0x08278fe9, 0x40100000, 0x00000000, 0x3fe19999, 0x99999999},
-{32,0,123,__LINE__, 0xbfd3bea0, 0x2ea8f055, 0x00000000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0xbff42a90, 0x1e049cb9, 0x3ff00000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0xc00f2471, 0x8187e729, 0x40000000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0xc038b10a, 0xea10f6d6, 0x40080000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0xc06e60bb, 0xde8f14ef, 0x40100000, 0x00000000, 0x3fe33333, 0x33333333},
-{32,0,123,__LINE__, 0xbfcfb24a, 0xb3c28954, 0x00000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0xbff2d40d, 0x6feded13, 0x3ff00000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0xc00afc52, 0x771e3074, 0x40000000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0xc03394d7, 0x35dd4674, 0x40080000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0xc0662c1a, 0xb93689c3, 0x40100000, 0x00000000, 0x3fe4cccc, 0xcccccccd},
-{32,0,123,__LINE__, 0xbfc867b5, 0x59ffc712, 0x00000000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0xbff1a6e9, 0x56728d34, 0x3ff00000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0xc007b11b, 0x25df166b, 0x40000000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0xc02fa392, 0xc2273c16, 0x40080000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0xc060944a, 0x3246acfb, 0x40100000, 0x00000000, 0x3fe66666, 0x66666667},
-{32,0,123,__LINE__, 0xbfc18ee0, 0x9734f23a, 0x00000000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0xbff099fc, 0xbe60fd83, 0x3ff00000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0xc00509b8, 0x49b8ad89, 0x40000000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0xc029f9b6, 0x1fd4c7b0, 0x40080000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0xc0595168, 0x5d870243, 0x40100000, 0x00000000, 0x3fe80000, 0x00000001},
-{32,0,123,__LINE__, 0xbfb638ac, 0x9857e734, 0x00000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0xbfef4cf5, 0x04341787, 0x3ff00000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0xc002de53, 0xbdddcf79, 0x40000000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0xc025a119, 0x5d1201de, 0x40080000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0xc053b015, 0x2951f343, 0x40100000, 0x00000000, 0x3fe99999, 0x9999999b},
-{32,0,123,__LINE__, 0xbfa41bfc, 0xc78b842a, 0x00000000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0xbfed8e7b, 0x7f0fdfef, 0x3ff00000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0xc001126f, 0x4890ce20, 0x40000000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0xc0223cc8, 0x6131d662, 0x40080000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0xc04f1de0, 0x4d92a9aa, 0x40100000, 0x00000000, 0x3feb3333, 0x33333335},
-{32,0,123,__LINE__, 0xbfebf0a7, 0x289d61b8, 0x3ff00000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xbfff2272, 0x1b13153c, 0x40000000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xc01f19f8, 0x1c8fc0b3, 0x40080000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xc048f1e5, 0xdc49dd3f, 0x40100000, 0x00000000, 0x3feccccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fa89f50, 0x75b2c5e8, 0x00000000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0xbfea6d54, 0xa3bd64cf, 0x3ff00000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0xbffc9661, 0x1516a1f9, 0x40000000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0xc01ac9e4, 0x0877ba85, 0x40080000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0xc044416c, 0xc8219ad1, 0x40100000, 0x00000000, 0x3fee6666, 0x66666669},
-{32,0,123,__LINE__, 0x3fb69802, 0x26f358eb, 0x00000000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0xbfe8ffb2, 0x07d66b92, 0x3ff00000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0xbffa6932, 0x2a45a11f, 0x40000000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0xc017493b, 0xe94ad3ab, 0x40080000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0xc040a3a3, 0x5da5f1b7, 0x40100000, 0x00000000, 0x3ff00000, 0x00000001},
-{32,0,123,__LINE__, 0x3fc028e5, 0x7ba671b1, 0x00000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0xbfe7a3ee, 0x4fd1a036, 0x3ff00000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0xbff888db, 0x13daece2, 0x40000000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0xc0146946, 0xaa74c5f3, 0x40080000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0xc03ba020, 0x66d6d9af, 0x40100000, 0x00000000, 0x3ff0cccc, 0xccccccce},
-{32,0,123,__LINE__, 0x3fc4c1c3, 0x8a97c170, 0x00000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0xbfe656fe, 0xd4e6087e, 0x3ff00000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0xbff6e74e, 0xa73b5cfc, 0x40000000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0xc0120767, 0xa624d948, 0x40080000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0xc0372746, 0xf81ba105, 0x40100000, 0x00000000, 0x3ff19999, 0x9999999b},
-{32,0,123,__LINE__, 0x3fc91951, 0xdc7f9b41, 0x00000000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0xbfe51674, 0x19440e82, 0x3ff00000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0xbff57978, 0xed5bd37f, 0x40000000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0xc010099a, 0xa448bba8, 0x40080000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0xc033938b, 0x31301627, 0x40100000, 0x00000000, 0x3ff26666, 0x66666668},
-{32,0,123,__LINE__, 0x3fcd31d7, 0x198f1810, 0x00000000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0xbfe3e059, 0x66ac1181, 0x3ff00000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0xbff43685, 0x636bf197, 0x40000000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0xc00cb81d, 0x4c08e398, 0x40080000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0xc030afa9, 0xf94ecf24, 0x40100000, 0x00000000, 0x3ff33333, 0x33333335},
-{32,0,123,__LINE__, 0x3fd0869f, 0xf937fa16, 0x00000000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0xbfe2b31c, 0x35470a48, 0x3ff00000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0xbff31758, 0x28ed39f1, 0x40000000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0xc009def9, 0x3429cd53, 0x40080000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0xc02ca8a6, 0x6cae1bef, 0x40100000, 0x00000000, 0x3ff40000, 0x00000002},
-{32,0,123,__LINE__, 0x3fd25698, 0x650b1f9a, 0x00000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xbfe18d79, 0x3faf4d46, 0x3ff00000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xbff2162a, 0xc0672ab8, 0x40000000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xc0076ff7, 0x26da4702, 0x40080000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0xc028c844, 0x238c8047, 0x40100000, 0x00000000, 0x3ff4cccc, 0xcccccccf},
-{32,0,123,__LINE__, 0x3fd4098a, 0x03bf8bf4, 0x00000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0xbfe06e6d, 0xc954f277, 0x3ff00000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0xbff12e42, 0x0c971b54, 0x40000000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0xc0055854, 0xa051bc74, 0x40080000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0xc02591b2, 0x37ab7c30, 0x40100000, 0x00000000, 0x3ff59999, 0x9999999c},
-{32,0,123,__LINE__, 0x3fd5a012, 0xe4dcec98, 0x00000000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0xbfdeaa58, 0x1213a9a4, 0x3ff00000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0xbff05bb6, 0x76876572, 0x40000000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0xc0038927, 0x5decadfe, 0x40080000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0xc022e2ea, 0x3a638496, 0x40100000, 0x00000000, 0x3ff66666, 0x66666669},
-{32,0,123,__LINE__, 0x3fd71abe, 0xc53f5eb2, 0x00000000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0xbfdc8223, 0xe8af2ee9, 0x3ff00000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0xbfef3692, 0xa1fe04a8, 0x40000000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0xc001f678, 0xe9ce40a6, 0x40080000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0xc020a1a1, 0x28d8cc82, 0x40100000, 0x00000000, 0x3ff73333, 0x33333336},
-{32,0,123,__LINE__, 0x3fd87a0b, 0x0d06836c, 0x00000000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0xbfda6343, 0xb92d8b07, 0x3ff00000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0xbfedd488, 0x01f6f3b9, 0x40000000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0xc000969c, 0xdf7ef118, 0x40080000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0xc01d72a8, 0xbebf03b5, 0x40100000, 0x00000000, 0x3ff80000, 0x00000003},
-{32,0,123,__LINE__, 0x3fd9be6a, 0x232d2a1a, 0x00000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0xbfd84cf8, 0xe7ade6ca, 0x3ff00000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0xbfec8cbc, 0xe0dd7c84, 0x40000000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0xbffec362, 0xe83a924e, 0x40080000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0xc01a33bf, 0xd946495c, 0x40100000, 0x00000000, 0x3ff8cccc, 0xccccccd0},
-{32,0,123,__LINE__, 0x3fdae846, 0x369db908, 0x00000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfd63eb7, 0xd493af10, 0x3ff00000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0xbfeb5b56, 0x002b29ec, 0x40000000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0xbffca27d, 0x8b11089e, 0x40080000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0xc0176cea, 0xf25a92d4, 0x40100000, 0x00000000, 0x3ff99999, 0x9999999d},
-{32,0,123,__LINE__, 0x3fdbf803, 0x95addba6, 0x00000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0xbfd4381f, 0xd07821fc, 0x3ff00000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0xbfea3d0d, 0x50f130f6, 0x40000000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0xbffabfd9, 0xa44c2351, 0x40080000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0xc01509af, 0xd3f8859b, 0x40100000, 0x00000000, 0x3ffa6666, 0x6666666a},
-{32,0,123,__LINE__, 0x3fdcee02, 0xa7ac1a57, 0x00000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0xbfd238f4, 0x6db73c42, 0x3ff00000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0xbfe92f18, 0xa36f036f, 0x40000000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0xbff91294, 0x95c98040, 0x40080000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0xc012f990, 0xf743eb12, 0x40100000, 0x00000000, 0x3ffb3333, 0x33333337},
-{32,0,123,__LINE__, 0x3fddcaa1, 0x9824527c, 0x00000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0xbfd04117, 0xe92d38c7, 0x3ff00000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0xbfe82f15, 0x515092d3, 0x40000000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0xbff79340, 0x197e7e29, 0x40080000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0xc0112f2f, 0xb4d4a2eb, 0x40100000, 0x00000000, 0x3ffc0000, 0x00000004},
-{32,0,123,__LINE__, 0x3fde8e3d, 0xc0648706, 0x00000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfcca10c, 0xe708dff2, 0x3ff00000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbfe73af7, 0xcb0a0ff0, 0x40000000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xbff63b9c, 0x612a1225, 0x40080000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0xc00f3f46, 0xaf2e44e8, 0x40100000, 0x00000000, 0x3ffccccc, 0xccccccd1},
-{32,0,123,__LINE__, 0x3fdf3934, 0xd9602e2a, 0x00000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0xbfc8cea4, 0x60c507ac, 0x3ff00000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0xbfe650fe, 0x33d095b1, 0x40000000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0xbff50660, 0xdc5a2a5e, 0x40080000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0xc00c83ee, 0xd1748df8, 0x40100000, 0x00000000, 0x3ffd9999, 0x9999999e},
-{32,0,123,__LINE__, 0x3fdfcbe5, 0xfe2a7986, 0x00000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfc50b3f, 0x93b80a84, 0x3ff00000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0xbfe56fa5, 0x69532494, 0x40000000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0xbff3ef10, 0x468232a6, 0x40080000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0xc00a1d8e, 0xa9356bdc, 0x40100000, 0x00000000, 0x3ffe6666, 0x6666666b},
-{32,0,123,__LINE__, 0x3fe02359, 0x42e057b3, 0x00000000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0xbfc15746, 0xfb241dc4, 0x3ff00000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0xbfe4959f, 0xf96ce29c, 0x40000000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0xbff2f1d5, 0x75c2f518, 0x40080000, 0x00000000, 0x3fff3333, 0x33333338},
-{32,0,123,__LINE__, 0xc007ffe0, 0x680bca3f, 0x40100000, 0x00000000, 0x3fff3333, 0x33333338},
-0,};
-test_ynf(m)   {run_vector_1(m,ynf_vec,(char *)(ynf),"ynf","fif");   }	
diff --git a/newlib/libtool.m4 b/newlib/libtool.m4
deleted file mode 100644
index 3f452bcba..000000000
--- a/newlib/libtool.m4
+++ /dev/null
@@ -1,879 +0,0 @@
-## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-        [AC_LIBTOOL_GCJ],
-	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	  [AC_LIBTOOL_GCJ],
-	[ifdef([AC_PROG_GCJ],
-	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([A][M_PROG_GCJ],
-	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
-	 ifdef([LT_AC_PROG_GCJ],
-	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
-  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-     pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      re_direlt=['/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd* )
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-  else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-  fi
-  ;;
-
-newsos6)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-              [ifdef([AC_PROVIDE_$1],
-                     [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
diff --git a/newlib/newlib.hin b/newlib/newlib.hin
deleted file mode 100644
index d8ee0b934..000000000
--- a/newlib/newlib.hin
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __NEWLIB_H__
-
-#define __NEWLIB_H__ 1
-
-/* EL/IX level */
-#undef _ELIX_LEVEL
-
-/* Newlib version */
-#undef _NEWLIB_VERSION
-
-/* MB_LEN_MAX */
-#undef _MB_LEN_MAX
-
-#endif /* !__NEWLIB_H__ */
-
diff --git a/newlib/stamp-h.in b/newlib/stamp-h.in
deleted file mode 100644
index e69de29bb..000000000
--- a/newlib/stamp-h.in
+++ /dev/null
diff --git a/newlib/testsuite/config/default.exp b/newlib/testsuite/config/default.exp
deleted file mode 100644
index 474218214..000000000
--- a/newlib/testsuite/config/default.exp
+++ /dev/null
@@ -1,7 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib standard.exp
diff --git a/newlib/testsuite/include/check.h b/newlib/testsuite/include/check.h
deleted file mode 100644
index df7f0cfa2..000000000
--- a/newlib/testsuite/include/check.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define CHECK(a) { \
-  if (!(a)) \
-    { \
-      printf ("Failed " #a " in <%s> at line %d\n", __FILE__, __LINE__); \
-      abort(); \
-    } \
-}
diff --git a/newlib/testsuite/lib/checkoutput.exp b/newlib/testsuite/lib/checkoutput.exp
deleted file mode 100644
index 8cb46925f..000000000
--- a/newlib/testsuite/lib/checkoutput.exp
+++ /dev/null
@@ -1,40 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-# newlib_check_output takes the basename of the test source file, and
-# a list of TCL regular expressions representing the expected output.
-# It assumes one line of output per test.
-
-proc newlib_check_output { srcfile expectlist } {
-    global objdir subdir srcdir
-
-    set srcfullname "$srcdir/$subdir/$srcfile"
-    set test_driver "$objdir/testsuite/[file tail [file rootname $srcfullname].x]"
-
-    set comp_output [newlib_target_compile "$srcfullname" "$test_driver" "executable" ""]
-
-    if { $comp_output != "" } {
-	fail "Failed to compile $srcfile.\n"
-	return
-    }
-
-    set result [newlib_load $test_driver ""]
-    set status [lindex $result 0]
-    set output [lindex $result 1]
-
-    set output_lines [split $output "\n"]
-
-    foreach { expectedval } $expectlist {
-	set gotval [string trim [lindex $output_lines 0] "\r"]
-	if { ! [string match $expectedval $gotval] } {
-	    fail "$srcfile: Expected: $expectedval Got: $gotval "
-	    return
-	}
-	set output_lines [lrange $output_lines 1 end]
-    }
-
-    pass $srcfile
-}
diff --git a/newlib/testsuite/lib/flags.exp b/newlib/testsuite/lib/flags.exp
deleted file mode 100644
index f6bffde1f..000000000
--- a/newlib/testsuite/lib/flags.exp
+++ /dev/null
@@ -1,82 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-# flags.exp: overrides the dejagnu versions of libgloss_link_flags,
-# newlib_link_flags, and newlib_include_flags.
-
-# These versions of the procedures generate link and include flags
-# by searching for the needed files in the current build and source
-# directories, rather than in the build and source paths of the
-# compiler being used.
-
-proc libgloss_link_flags { args } {
-    global target_cpu
-    # These values come from the local site.exp.
-    global srcdir objdir
-    global multibuildtop
-
-    verbose "In newlib version of libgloss_link_flags...\n"
-
-    if [isnative] {
-	return ""
-    }
-
-    if [is_remote host] {
-	return ""
-    }
-
-    set target_build_path "$objdir/$multibuildtop.."
-
-    set gloss_srcdir [lookfor_file ${srcdir} libgloss/$target_cpu]
-
-    if { $gloss_srcdir == "" } {
-	return ""
-    }
-
-    if [file exists $target_build_path/libgloss/$target_cpu] {
-	verbose "libgloss path is $target_build_path/libgloss/$target_cpu" 2
-	return "-B$target_build_path/libgloss/$target_cpu/ -L$target_build_path/libgloss/$target_cpu -L$gloss_srcdir"
-    } else {
-	verbose -log "No libgloss support for this target." 2
-	return ""
-    }
-}
-
-proc newlib_link_flags { args } {
-    global tool_root_dir
-    global srcdir objdir
-
-    verbose "In newlib version of newlib_link_flags...\n"
-
-    if [is_remote host] {
-	return ""
-    }
-
-    set ld_script_path [lookfor_file ${tool_root_dir} "ld/ldscripts"];
-    if { $ld_script_path != "" } {
-	set result "-L[file dirname $ld_script_path]"
-    } else {
-	set result ""
-    }
-
-    return "$result -B$objdir -L$objdir"
-}
-
-proc newlib_include_flags { args } {
-    global srcdir objdir
-
-    verbose "In newlib version of newlib_include_flags...\n"
-
-    if [is_remote host] {
-	return ""
-    }
-
-    set newlib_dir [lookfor_file ${srcdir} newlib/libc/include/assert.h]
-    if { ${newlib_dir} != "" } {
-	set newlib_dir [file dirname ${newlib_dir}]
-    }
-    return " -I$objdir/targ-include -I${newlib_dir}"
-}
diff --git a/newlib/testsuite/lib/newlib.exp b/newlib/testsuite/lib/newlib.exp
deleted file mode 100644
index c53a8a819..000000000
--- a/newlib/testsuite/lib/newlib.exp
+++ /dev/null
@@ -1,104 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-# flags.exp overrides the dejagnu versions of libgloss_link_flags,
-# newlib_link_flags, and newlib_include_flags.
-load_lib flags.exp
-
-proc newlib_version { } {
-    global tool_version
-
-    verbose "In newlib version...\n"
-
-    return $tool_version
-}
-
-set newlib_initialized 0
-
-proc newlib_init { args } {
-    global gluefile wrap_flags
-    global newlib_initialized
-    global target_info
-    # These values are initialized in the local site.exp file.
-    global srcdir objdir
-    global host_triplet target_triplet
-    global old_ld_library_path
-
-    verbose "In newlib_init...\n"
-
-    if { $newlib_initialized == 1 } { return; }
-
-    if {[target_info needs_status_wrapper] != "" && \
-	    [target_info needs_status_wrapper] != "0" && \
-	    ![info exists gluefile]} {
-	set gluefile ${objdir}/testsuite/testglue.o;
-	set result [build_wrapper $gluefile];
-	if { $result != "" } {
-	    set gluefile [lindex $result 0];
-	    set wrap_flags [lindex $result 1];
-	} else {
-	    unset gluefile
-	}
-    }
-
-    if [string match $host_triplet $target_triplet] then {
-	if [string match "i686-pc-linux-gnu" $host_triplet] then {
-	    set old_ld_library_path [getenv LD_LIBRARY_PATH]
-	    setenv LD_LIBRARY_PATH "$objdir/.libs"
-	}
-    }
-}
-
-proc newlib_target_compile { source dest type options } {
-    global gluefile wrap_flags
-    global srcdir objdir
-    global host_triplet target_triplet
-
-    verbose "In newlib_target_compile...\n"
-
-    lappend options "libs=-I$srcdir/include"
-    verbose "srcdir is $srcdir"
-	
-    if {[target_info needs_status_wrapper] != "" && \
-	    [target_info needs_status_wrapper] != "0" && \
-	    [info exists gluefile] } {
-	lappend options "libs=$gluefile"
-	lappend options "ldflags=$wrap_flags"
-    }
-
-    if [string match $host_triplet $target_triplet] then {
-	if [string match "i686-pc-linux-gnu" $host_triplet] then {
-	    lappend options "libs=$objdir/crt0.o -lc -lgcc"
-	    lappend options "ldflags=-nostdlib -L$objdir/.libs [newlib_include_flags]"
-	}
-    }
-
-    return [target_compile $source $dest $type $options]
-}
-
-proc newlib_finish { } {
-    global old_ld_library_path
-    global host_triplet target_triplet
-
-    verbose "In newlib_finish...\n"
-
-    if [string match $host_triplet $target_triplet] then {
-	if [string match "i686-pc-linux-gnu" $host_triplet] then {
-	    setenv LD_LIBRARY_PATH "$old_ld_library_path"
-	}
-    }
-}
-
-proc newlib_exit { } {
-    global gluefile;
-    
-    verbose "In newlib_exit...\n"
-
-    if [info exists gluefile] {
-	file_on_build delete $gluefile;
-	unset gluefile;
-    }
-}
diff --git a/newlib/testsuite/lib/passfail.exp b/newlib/testsuite/lib/passfail.exp
deleted file mode 100644
index 82dc0093c..000000000
--- a/newlib/testsuite/lib/passfail.exp
+++ /dev/null
@@ -1,50 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-# newlib_pass_fail_all compiles and runs all the source files in the
-# test directory. If flag is -x, then the sources whose basenames are
-# listed in exclude_list are not compiled and run.
-
-proc newlib_pass_fail_all { flag exclude_list } {
-    global srcdir objdir subdir runtests
-
-    foreach fullsrcfile [glob -nocomplain $srcdir/$subdir/*.c] {
-	set srcfile "[file tail $fullsrcfile]"
-	# If we're only testing specific files and this isn't one of them, skip it.
-	if ![runtest_file_p $runtests $srcfile] then {
-	    continue
-	}
-
-	# Exclude tests listed in exclude_list.
-	if { $flag == "-x" } then {
-	    if {[lsearch $exclude_list "$srcfile"] != -1} then {
-		continue
-	    }
-	}
-	newlib_pass_fail "$srcfile"
-    }
-}
-
-# newlib_pass_fail takes the basename of a test source file, which it
-# compiles and runs.
-
-proc newlib_pass_fail { srcfile } {
-    global srcdir objdir subdir
-
-    set fullsrcfile "$srcdir/$subdir/$srcfile"
-
-    set test_driver "$objdir/testsuite/[file rootname $srcfile].x"
-
-    set comp_output [newlib_target_compile "$fullsrcfile" "$test_driver" "executable" ""]
-
-    if { $comp_output != "" } {
-	fail "Failed to compile $fullsrcfile.\n"
-    } else {
-	set result [newlib_load $test_driver ""]
-	set status [lindex $result 0]
-	$status "$fullsrcfile"
-    }
-}
diff --git a/newlib/testsuite/newlib.elix/elix.exp b/newlib/testsuite/newlib.elix/elix.exp
deleted file mode 100644
index 6c0ee92e6..000000000
--- a/newlib/testsuite/newlib.elix/elix.exp
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-global host_triplet target_triplet
-
-load_lib passfail.exp
-
-set exclude_list {
-}
-
-verbose $host_triplet
-verbose $target_triplet
-
-if [string match "i\[3456\]86-pc-linux-gnu" $target_triplet] then {
-  newlib_pass_fail_all -x $exclude_list
-}
diff --git a/newlib/testsuite/newlib.elix/tmmap.c b/newlib/testsuite/newlib.elix/tmmap.c
deleted file mode 100644
index d930c96b1..000000000
--- a/newlib/testsuite/newlib.elix/tmmap.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include "check.h"
-
-int main()
-{
-  int fd;
-  char *x;
-  FILE *fp;
-  char buf[40];
-
-  fd = open("my.file", O_CREAT | O_TRUNC | O_RDWR, 0644);
-
-  CHECK (fd != -1);
-
-  CHECK (write (fd, "abcdefgh", 8) == 8); 
- 
-  x = (char *)mmap (0, 20, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
-
-  CHECK (x != MAP_FAILED);
-
-  x[3] = 'j';
-
-  CHECK (munmap (x, 20) == 0);
-
-  CHECK (close(fd) != -1);
-
-  fp = fopen("my.file","r");
-
-  CHECK (fp != NULL);
-
-  CHECK (fread(buf, 1, 20, fp) == 8);
-
-  CHECK (strncmp (buf, "abcjefgh", 8) == 0);
-
-  exit (0);
-}
-
diff --git a/newlib/testsuite/newlib.locale/UTF-8.c b/newlib/testsuite/newlib.locale/UTF-8.c
deleted file mode 100644
index 3e5626719..000000000
--- a/newlib/testsuite/newlib.locale/UTF-8.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- *  Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
- *
- *  Permission to use, copy, modify, and distribute this software
- *  is freely granted, provided that this notice is preserved.
- *
- *  Tests gleaned from Markus Kuhn's UTF-8 and Unicode FAQ,
- *  and specifically, his UTF-8-test.txt decoder stress test file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <locale.h>
-
-#define MAX_BYTES 65
-
-int num_invalid(const char *s, int len);
-
-char first[6][6] = {
-  {0x0},                                   /* U-00000000 */
-  {0xc2, 0x80},                            /* U-00000080 */
-  {0xe0, 0xa0, 0x80},                      /* U-00000800 */
-  {0xf0, 0x90, 0x80, 0x80},                /* U-00010000 */
-  {0xf8, 0x88, 0x80, 0x80, 0x80},          /* U-00200000 */
-  {0xfc, 0x84, 0x80, 0x80, 0x80, 0x80}     /* U-04000000 */
-};
-
-char last[6][6] = {
-  {0x7f},                                  /* U-0000007F */
-  {0xdf, 0xbf},                            /* U-000007FF */
-  {0xef, 0xbf, 0xbf},                      /* U-0000FFFF */
-  {0xf7, 0xbf, 0xbf, 0xbf},                /* U-001FFFFF */
-  {0xfb, 0xbf, 0xbf, 0xbf, 0xbf},          /* U-03FFFFFF */
-  {0xfd, 0xbf, 0xbf, 0xbf, 0xbf, 0xbf}     /* U-7FFFFFFF */
-};
-
-char boundary[5][6] = {
-  {0xed, 0x9f, 0xbf},                      /* U-0000D7FF */
-  {0xee, 0x80, 0x80},                      /* U-0000E000 */
-  {0xef, 0xbf, 0xbd},                      /* U-0000FFFD */
-  {0xf4, 0x8f, 0xbf, 0xbf},                /* U-0010FFFF */
-  {0xf4, 0x90, 0x80, 0x80}                 /* U-00110000 */
-};
-
-char continuation_bytes[8][7] = {
-  {0x80},
-  {0xbf},
-  {0x80, 0xbf},
-  {0x80, 0xbf, 0x80},
-  {0x80, 0xbf, 0x80, 0xbf},
-  {0x80, 0xbf, 0x80, 0xbf, 0x80},
-  {0x80, 0xbf, 0x80, 0xbf, 0x80, 0xbf},
-  {0x80, 0xbf, 0x80, 0xbf, 0x80, 0xbf, 0x80}
-};
-
-char all_continuation_bytes[64];
-
-
-char all_two_byte_seq[32];
-char all_three_byte_seq[16];
-char all_four_byte_seq[8];
-char all_five_byte_seq[4];
-char all_six_byte_seq[2];
-
-char incomplete_seq[10][6] = {
-  {0xc2},                            /* U-00000080 */
-  {0xe0, 0x80},                      /* U-00000800 */
-  {0xf0, 0x80, 0x80},                /* U-00010000 */
-  {0xf8, 0x80, 0x80, 0x80},          /* U-00200000 */
-  {0xfc, 0x80, 0x80, 0x80, 0x80},    /* U-04000000 */
-  {0xdf},                            /* U-000007FF */
-  {0xef, 0xbf},                      /* U-0000FFFF */
-  {0xf7, 0xbf, 0xbf},                /* U-001FFFFF */
-  {0xfb, 0xbf, 0xbf, 0xbf},          /* U-03FFFFFF */
-  {0xfd, 0xbf, 0xbf, 0xbf, 0xbf}     /* U-7FFFFFFF */
-};
-
-char incomplete_seq_concat[30];
-
-char impossible_bytes[3][4] = {
-  {0xfe},
-  {0xff},
-  {0xfe, 0xfe, 0xff, 0xff}
-};
-
-char overlong[5][6] = {
-  {0xc0, 0xaf},
-  {0xe0, 0x80, 0xaf},
-  {0xf0, 0x80, 0x80, 0xaf},
-  {0xf8, 0x80, 0x80, 0x80, 0xaf},
-  {0xfc, 0x80, 0x80, 0x80, 0x80, 0xaf}
-};
-
-char overlong_max[5][6] = {
-  {0xc1, 0xbf},
-  {0xe0, 0x9f, 0xbf},
-  {0xf0, 0x8f, 0xbf, 0xbf},
-  {0xf8, 0x87, 0xbf, 0xbf, 0xbf},
-  {0xfc, 0x83, 0xbf, 0xbf, 0xbf, 0xbf}
-};
-
-char overlong_nul[5][6] = {
-  {0xc0, 0x80},
-  {0xe0, 0x80, 0x80},
-  {0xf0, 0x80, 0x80, 0x80},
-  {0xf8, 0x80, 0x80, 0x80, 0x80},
-  {0xfc, 0x80, 0x80, 0x80, 0x80, 0x80}
-};
-
-char single_surrogates[7][3] = {
-  {0xed, 0xa0, 0x80},
-  {0xed, 0xad, 0xbf},
-  {0xed, 0xae, 0x80},
-  {0xed, 0xaf, 0xbf},
-  {0xed, 0xb0, 0x80},
-  {0xed, 0xbe, 0x80},
-  {0xed, 0xbf, 0xbf}
-};
-
-char paired_surrogates[8][6] = {
-  {0xed, 0xa0, 0x80, 0xed, 0xb0, 0x80},
-  {0xed, 0xa0, 0x80, 0xed, 0xbf, 0xbf},
-  {0xed, 0xad, 0xbf, 0xed, 0xb0, 0x80},
-  {0xed, 0xad, 0xbf, 0xed, 0xbf, 0xbf},
-  {0xed, 0xae, 0x80, 0xed, 0xb0, 0x80},
-  {0xed, 0xae, 0x80, 0xed, 0xbf, 0xbf},
-  {0xed, 0xaf, 0xbf, 0xed, 0xb0, 0x80},
-  {0xed, 0xaf, 0xbf, 0xed, 0xbf, 0xbf}
-};
-
-char illegal_pos[2][3] = {
-  {0xff, 0xfe},
-  {0xff, 0xff}
-};
-  
-int main()
-  {
-    wchar_t wchar;
-    int retval;
-    int i;
-
-    if (!setlocale(LC_CTYPE, "C-UTF-8"))
-      {
-        printf("Failed to set C-UTF-8 locale.\n");
-        return 1;
-      }
-    else
-      printf("Set C-UTF-8 locale.\n");
-
-    /* 2  Boundary condition test cases */
-    /* 2.1  First possible sequence of a certain length */
-    retval = mbtowc(&wchar, first[0], MAX_BYTES);
-    if (retval == 0)
-      printf("2.1.1: U-%08d\n", wchar);
-    else
-      printf("2.1.1: Invalid\n");
-
-    for (i = 2; i < 7; i++)
-    {
-      retval = mbtowc (&wchar, first[i-1], MAX_BYTES);
-      if (retval == i)
-        printf("2.1.%d: U-%08x\n", i, wchar);
-      else
-        printf("2.1.%d: Invalid\n", i);
-    }
-
-    /* 2.2  Last possible sequence of a certain length */
-    for (i = 1; i < 7; i++)
-    {
-      retval = mbtowc (&wchar, last[i-1], MAX_BYTES);
-      if (retval == i)
-        printf("2.2.%d: U-%08x\n", i, wchar);
-      else
-        printf("2.2.%d: Invalid\n", i);
-    }
-
-    /* 2.3  Other boundary conditions */
-    for (i = 1; i < 6; i++)
-      {
-        retval = mbtowc (&wchar, boundary[i-1], MAX_BYTES);
-        if ((i < 4 && retval == 3) || (i > 3 && retval == 4))
-          printf("2.3.%d: U-%08x\n", i, wchar);
-        else
-          printf("2.3.%d: Invalid\n", i);
-      }
-
-    /* 3  Malformed sequences */
-    /* 3.1  Unexpected continuation bytes */
-    retval = mbtowc (&wchar, continuation_bytes[0], MAX_BYTES);
-    if (retval == 1)
-      printf("3.1.1: U-%08x\n", wchar);
-    else
-      printf("3.1.1: 1 Invalid\n");
-
-    retval = mbtowc (&wchar, continuation_bytes[1], MAX_BYTES);
-    if (retval == 1)
-      printf("3.1.2: U-%08x\n", wchar);
-    else
-      printf("3.1.2: 1 Invalid\n");
-
-    for(i=2; i< 8; i++)
-      {
-        retval = num_invalid(continuation_bytes[i], i);
-        if (retval == -1)
-          printf("3.1.%d: Valid Character Found\n", i+1);
-        else
-          printf("3.1.%d: %d Invalid\n", i+1, retval);
-      }
-
-    for(i = 0x80; i < 0xc0; i++)
-      all_continuation_bytes[i-0x80] = i;
-
-    retval = num_invalid(all_continuation_bytes, 0xc0 - 0x80);
-    if (retval == -1)
-      printf("3.1.9: Valid Character Found\n");
-    else
-      printf("3.1.9: %d Invalid\n", retval);
-
-    /* 3.2  Lonely start characters */
-    for(i = 0xc0; i < 0xe0; i++)
-      all_two_byte_seq[i-0xc0] = i;
-
-    retval = num_invalid(all_two_byte_seq, 0xe0 - 0xc0);
-    if (retval == -1)
-      printf("3.2.1: Valid Character Found\n");
-    else
-      printf("3.2.1: %d Invalid\n", retval);
-
-    for(i = 0xe0; i < 0xf0; i++)
-      all_three_byte_seq[i-0xe0] = i;
-
-    retval = num_invalid(all_three_byte_seq, 0xf0 - 0xe0);
-    if (retval == -1)
-      printf("3.2.2: Valid Character Found\n");
-    else
-      printf("3.2.2: %d Invalid\n", retval);
-    
-    for(i = 0xf0; i < 0xf8; i++)
-      all_four_byte_seq[i-0xf0] = i;
-
-    retval = num_invalid(all_four_byte_seq, 0xf8 - 0xf0);
-    if (retval == -1)
-      printf("3.2.3: Valid Character Found\n");
-    else
-      printf("3.2.3: %d Invalid\n", retval);
-    
-    for(i = 0xf8; i < 0xfc; i++)
-      all_five_byte_seq[i-0xf8] = i;
-
-    retval = num_invalid(all_five_byte_seq, 0xfc - 0xf8);
-    if (retval == -1)
-      printf("3.2.4: Valid Character Found\n");
-    else
-      printf("3.2.4: %d Invalid\n", retval);
-
-    for(i = 0xfc; i < 0xfe; i++)
-      all_six_byte_seq[i-0xfc] = i;
-
-    retval = num_invalid(all_six_byte_seq, 0xfe - 0xfc);
-    if (retval == -1)
-      printf("3.2.5: Valid Character Found\n");
-    else
-      printf("3.2.5: %d Invalid\n", retval);
-
-    /* 3.3  Sequences with last continuation byte missing */
-    for(i = 1; i < 6; i++)
-      {
-        retval = mbtowc(&wchar, incomplete_seq[i-1], i);
-        if(retval == -1)
-          printf("3.3.%d: 1 Invalid\n", i);
-        else
-          printf("3.3.%d: Valid Character Found\n", i);
-      }
-
-    for(i = 6; i < 11; i++)
-      {
-        retval = mbtowc(&wchar, incomplete_seq[i-1], i - 5);
-        if(retval == -1)
-          printf("3.3.%d: 1 Invalid\n", i);
-        else
-          printf("3.3.%d: Valid Character Found\n", i);
-      }
-
-    /* 3.4  Concatenation of incomplete sequences */
-    /* This test is excluded because the mbtowc function does not return the
-       number of bytes read in an invalid multi-byte sequence. */
-
-    /* 3.5  Impossible bytes */
-    retval = mbtowc(&wchar, impossible_bytes[0], 1);
-    if(retval == -1)
-      printf("3.5.1: 1 Invalid\n");
-    else
-      printf("3.5.1: Valid Character Found\n");
-
-    retval = mbtowc(&wchar, impossible_bytes[1], 1);
-    if(retval == -1)
-      printf("3.5.2: 1 Invalid\n");
-    else
-      printf("3.5.2: Valid Character Found\n");
-
-    retval = mbtowc(&wchar, impossible_bytes[2], 4);
-    if(retval == -1)
-      printf("3.5.3: 1 Invalid\n");
-    else
-      printf("3.5.3: Valid Character Found\n");
-
-    /* 4  Overlong sequences */
-    /* 4.1  Examples of an overlong ASCII character */
-    for(i = 2; i < 7; i++)
-      {
-        retval = mbtowc(&wchar, overlong[i-2], i);
-        if(retval == -1)
-          printf("4.1.%d: 1 Invalid\n", i-1);
-        else
-          printf("4.1.%d: Valid Character Found\n", i-1);
-      }
-
-    /* 4.2  Maximum overlong sequences */
-    for(i = 2; i < 7; i++)
-      {
-        retval = mbtowc(&wchar, overlong_max[i-2], i);
-        if(retval == -1)
-          printf("4.2.%d: 1 Invalid\n", i-1);
-        else
-          printf("4.2.%d: Valid Character Found\n", i-1);
-      }
-
-    /* 4.3  Overlong representation of the NUL character */
-    for(i = 2; i < 7; i++)
-      {
-        retval = mbtowc(&wchar, overlong_nul[i-2], i);
-        if(retval == -1)
-          printf("4.3.%d: 1 Invalid\n", i-1);
-        else
-          printf("4.3.%d: Valid Character Found\n", i-1);
-      }
-
-    /* 5  Illegal code positions */
-    /* 5.1 Single UTF-16 surrogates */
-    for (i = 1; i < 8; i++)
-      {
-        retval = mbtowc(&wchar, single_surrogates[i-1], 3);
-        if(retval == -1)
-          printf("5.1.%d: 1 Invalid\n", i);
-        else
-          printf("5.1.%d: Valid Character Found\n", i);
-      }
-    
-    /* 5.2 Paired UTF-16 surrogates */
-    for (i = 1; i < 8; i++)
-      {
-        retval = mbtowc(&wchar, paired_surrogates[i-1], 6);
-        if(retval == -1)
-          printf("5.2.%d: 1 Invalid\n", i);
-        else
-          printf("5.2.%d: Valid Character Found\n", i);
-      }
-
-    /* 5.3 Other illegal code positions */
-    retval = mbtowc(&wchar, illegal_pos[0], 3);
-    if(retval == -1)
-      printf("5.3.1: 1 Invalid\n");
-    else
-      printf("5.3.1: Valid Character Found\n");
-
-    retval = mbtowc(&wchar, illegal_pos[1], 3);
-    if(retval == -1)
-      printf("5.3.2: 1 Invalid\n");
-    else
-      printf("5.3.2: Valid Character Found\n");
-    
-    return 0;
-  }
-
-/* return number of invalid characters in string,
-   returns -1 if a valid character is found */
-int
-num_invalid(const char *s, int len)
-{
-  int retval = 0;
-  int i = 0;
-  int num_inv = 0;
-  wchar_t wchar;
-  const char *t;
-
-  t = s;
-
-  for(i=0; i<len; t++, i++)
-    {
-      retval = mbtowc (&wchar, t, len - i);
-      if(retval == -1)
-        num_inv++;
-      else
-        return -1;
-    }
-  return num_inv;
-}
diff --git a/newlib/testsuite/newlib.locale/UTF-8.exp b/newlib/testsuite/newlib.locale/UTF-8.exp
deleted file mode 100644
index e823a4f96..000000000
--- a/newlib/testsuite/newlib.locale/UTF-8.exp
+++ /dev/null
@@ -1,88 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib checkoutput.exp
-
-set expected_output {
-"Set C-UTF-8 locale."
-"* U-00000000"
-"* U-00000080"
-"* U-00000800"
-"* U-00010000"
-"* U-00200000"
-"* U-04000000"
-"* U-0000007f"
-"* U-000007ff"
-"* U-0000ffff"
-"* U-001fffff"
-"* U-03ffffff"
-"* U-7fffffff"
-"* U-0000d7ff"
-"* U-0000e000"
-"* U-0000fffd"
-"* U-0010ffff"
-"* U-00110000"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 2 Invalid"
-"* 3 Invalid"
-"* 4 Invalid"
-"* 5 Invalid"
-"* 6 Invalid"
-"* 7 Invalid"
-"* 64 Invalid"
-"* 32 Invalid"
-"* 16 Invalid"
-"* 8 Invalid"
-"* 4 Invalid"
-"* 2 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-"* 1 Invalid"
-}
-
-newlib_check_output UTF-8.c $expected_output
diff --git a/newlib/testsuite/newlib.locale/locale.exp b/newlib/testsuite/newlib.locale/locale.exp
deleted file mode 100644
index 9d6f4dd64..000000000
--- a/newlib/testsuite/newlib.locale/locale.exp
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib passfail.exp
-
-set exclude_list {
-"UTF-8.c"
-}
-
-newlib_pass_fail_all -x $exclude_list
diff --git a/newlib/testsuite/newlib.search/hsearchtest.c b/newlib/testsuite/newlib.search/hsearchtest.c
deleted file mode 100644
index 515440382..000000000
--- a/newlib/testsuite/newlib.search/hsearchtest.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*	$NetBSD: hsearchtest.c,v 1.4 2002/02/21 07:38:15 itojun Exp $	*/
-
-/*
- * Copyright (c) 2001 Christopher G. Demetriou
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
- * <<Id: LICENSE_GC,v 1.1 2001/10/01 23:24:05 cgd Exp>>
- */
-
-/*
- * Test program for hsearch() et al.
- */
-
-#include <sys/cdefs.h>
-#if 0
-#if !defined(lint)
-__RCSID("$NetBSD: hsearchtest.c,v 1.4 2002/02/21 07:38:15 itojun Exp $");
-__COPYRIGHT(
-"@(#) Copyright (c) 2001 Christopher G. Demetriou.  All rights reserved.\n");
-#endif /* not lint */
-#endif
-
-#include <search.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#define	TEST(e)	((e) ? (void)0 : testfail(__FILE__, __LINE__, #e))
-
-static void
-testfail(const char *file, unsigned long line, const char *expression)
-{
-
-	fprintf(stderr, "TEST FAILED: %s: file %s, line %ld\n",
-	    expression, file, line);
-	exit(1);
-}
-
-int
-main(int argc, char *argv[])
-{
-	ENTRY e, *ep, *ep2;
-	int created_ok;
-	char ch[2];
-	int i;
-
-	created_ok = hcreate(16);
-	TEST(created_ok);
-
-	/* ch[1] should be constant from here on down. */
-	ch[1] = '\0';
-	
-	/* Basic insertions.  Check enough that there'll be collisions. */
-	for (i = 0; i < 26; i++) {
-		ch[0] = 'a' + i;
-		e.key = strdup(ch);	/* ptr to provided key is kept! */
-		TEST(e.key != NULL);
-		e.data = (void *)(long)i;
-		ep = hsearch(e, ENTER);
-		TEST(ep != NULL);
-		TEST(strcmp(ep->key, ch) == 0);
-		TEST((long)ep->data == i);
-	}
-
-	/* e.key should be constant from here on down. */
-	e.key = ch;
-
-	/* Basic lookups. */
-	for (i = 0; i < 26; i++) {
-		ch[0] = 'a' + i;
-		ep = hsearch(e, FIND);
-		TEST(ep != NULL);
-		TEST(strcmp(ep->key, ch) == 0);
-		TEST((long)ep->data == i);
-	}
-
-	/* Check duplicate entry.  Should _not_ overwrite existing data.  */
-	ch[0] = 'a';
-	e.data = (void *)(long)12345;
-	ep = hsearch(e, FIND);
-	TEST(ep != NULL);
-	TEST(strcmp(ep->key, ch) == 0);
-	TEST((long)ep->data == 0);
-
-	/* Check for something that's not there. */
-	ch[0] = 'A';
-	ep = hsearch(e, FIND);
-	TEST(ep == NULL);
-
-	/* Check two at once. */
-	ch[0] = 'a';
-	ep = hsearch(e, FIND);
-	ch[0] = 'b';
-	ep2 = hsearch(e, FIND);
-	TEST(ep != NULL);
-	TEST(strcmp(ep->key, "a") == 0 && (long)ep->data == 0);
-	TEST(ep2 != NULL);
-	TEST(strcmp(ep2->key, "b") == 0 && (long)ep2->data == 1);
-
-	hdestroy();
-
-	exit(0);
-}
diff --git a/newlib/testsuite/newlib.search/hsearchtest.exp b/newlib/testsuite/newlib.search/hsearchtest.exp
deleted file mode 100644
index cd5d7d689..000000000
--- a/newlib/testsuite/newlib.search/hsearchtest.exp
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib passfail.exp
-
-set exclude_list {
-}
-
-newlib_pass_fail_all -x $exclude_list
diff --git a/newlib/testsuite/newlib.stdlib/atexit.c b/newlib/testsuite/newlib.stdlib/atexit.c
deleted file mode 100644
index 48fdb6733..000000000
--- a/newlib/testsuite/newlib.stdlib/atexit.c
+++ /dev/null
@@ -1,48 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-
-void a(void);
-void b(void);
-void c(int, void *);
-static void newline(void);
-
-void a (void)
-{
-  printf("a");
-}
-
-void b (void)
-{
-  printf("b");
-}
-
-void c (int code, void *k)
-{
-  char *x = (char *)k;
-  printf("%d%c",code,x[0]);
-}
-
-static void newline (void)
-{
-  printf("\n");
-}
-
-int main()
-{
-  if (atexit(newline) != 0)
-    abort();
-
-  if (atexit(a) != 0)
-    abort();
-
-  if (atexit(b) != 0)
-    abort();
-
-  if (on_exit(c,(void *)"c") != 0)
-    abort();
-
-  if (atexit(a) != 0)
-    abort();
-
-  exit(0);
-}
diff --git a/newlib/testsuite/newlib.stdlib/atexit.exp b/newlib/testsuite/newlib.stdlib/atexit.exp
deleted file mode 100644
index 777110d30..000000000
--- a/newlib/testsuite/newlib.stdlib/atexit.exp
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib checkoutput.exp
-
-set output {
-"a0cba"
-}
-
-newlib_check_output "atexit.c" "$output"
diff --git a/newlib/testsuite/newlib.string/string.exp b/newlib/testsuite/newlib.string/string.exp
deleted file mode 100644
index cd5d7d689..000000000
--- a/newlib/testsuite/newlib.string/string.exp
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib passfail.exp
-
-set exclude_list {
-}
-
-newlib_pass_fail_all -x $exclude_list
diff --git a/newlib/testsuite/newlib.string/tstring.c b/newlib/testsuite/newlib.string/tstring.c
deleted file mode 100644
index e4339232b..000000000
--- a/newlib/testsuite/newlib.string/tstring.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software
- * is freely granted, provided that this notice is preserved.
- */
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-#ifndef MAX_1
-#define MAX_1 33000
-#endif
-
-#define MAX_2 (2 * MAX_1 + MAX_1 / 10)
-
-void eprintf (int line, char *result, char *expected, int size)
-{
-  if (size != 0)
-    printf ("Failure at line %d, result is <%.*s>, should be <%s> of size %d\n",
-             line, size, result, expected, size);
-  else
-    printf ("Failure at line %d, result is <%s>, should be <%s>\n",
-             line, result, expected);
-}
-
-void mycopy (char *target, char *source, int size)
-{
-  int i;
-
-  for (i = 0; i < size; ++i)
-    {
-      target[i] = source[i];
-    }
-}
-
-void myset (char *target, char ch, int size)
-{
-  int i;
-  
-  for (i = 0; i < size; ++i)
-    {
-      target[i] = ch;
-    }
-}
-
-int main()
-{
-  char target[MAX_1] = "A";
-  char first_char;
-  char second_char;
-  char array[] = "abcdefghijklmnopqrstuvwxz";
-  char array2[] = "0123456789!@#$%^&*(";
-  char buffer2[MAX_1];
-  char buffer3[MAX_1];
-  char buffer4[MAX_1];
-  char buffer5[MAX_2];
-  char buffer6[MAX_2];
-  char buffer7[MAX_2];
-  char expected[MAX_1];
-  char *tmp1, *tmp2, *tmp3, *tmp4, *tmp5, *tmp6, *tmp7;
-  int i, j, k, x, z, align_test_iterations;
-
-  int test_failed = 0;
-
-  tmp1 = target;
-  tmp2 = buffer2;
-  tmp3 = buffer3;
-  tmp4 = buffer4;
-  tmp5 = buffer5;
-  tmp6 = buffer6;
-  tmp7 = buffer7;
-
-  tmp2[0] = 'Z';
-  tmp2[1] = '\0';
-
-  if (memset (target, 'X', 0) != target ||
-      memcpy (target, "Y", 0) != target ||
-      memmove (target, "K", 0) != target ||
-      strncpy (tmp2, "4", 0) != tmp2 ||
-      strncat (tmp2, "123", 0) != tmp2 ||
-      strcat (target, "") != target)
-    {
-      eprintf (__LINE__, target, "A", 0);
-      test_failed = 1;
-    }
-
-  if (strcmp (target, "A") || strlen(target) != 1 || memchr (target, 'A', 0) != NULL
-      || memcmp (target, "J", 0) || strncmp (target, "A", 1) || strncmp (target, "J", 0) ||
-      tmp2[0] != 'Z' || tmp2[1] != '\0')
-    {
-      eprintf (__LINE__, target, "A", 0);
-      test_failed = 1;
-    }
-
-  tmp2[2] = 'A';
-  if (strcpy (target, "") != target ||
-      strncpy (tmp2, "", 4) != tmp2 ||
-      strcat (target, "") != target)
-    {
-      eprintf (__LINE__, target, "", 0);
-      test_failed = 1;
-    }
-
-  if (target[0] != '\0' || strncmp (target, "", 1) ||
-      memcmp (tmp2, "\0\0\0\0", 4))
-    {
-      eprintf (__LINE__, target, "", 0);
-      test_failed = 1;
-    }
-
-  tmp2[2] = 'A';
-  if (strncat (tmp2, "1", 3) != tmp2 ||
-      memcmp (tmp2, "1\0A", 3))
-    {
-      eprintf (__LINE__, tmp2, "1\0A", 3);
-      test_failed = 1;
-    }
-
-  if (strcpy (tmp3, target) != tmp3 ||
-      strcat (tmp3, "X") != tmp3 ||
-      strncpy (tmp2, "X", 2) != tmp2 ||
-      memset (target, tmp2[0], 1) != target)
-    {
-      eprintf (__LINE__, target, "X", 0);
-      test_failed = 1;
-    }
-
-  if (strcmp (target, "X") || strlen (target) != 1 ||
-      memchr (target, 'X', 2) != target ||
-      strchr (target, 'X') != target ||
-      memchr (target, 'Y', 2) != NULL ||
-      strchr (target, 'Y') != NULL ||
-      strcmp (tmp3, target) ||
-      strncmp (tmp3, target, 2) ||
-      memcmp (target, "K", 0) ||
-      strncmp (target, tmp3, 3))
-    {
-      eprintf (__LINE__, target, "X", 0);
-      test_failed = 1;
-    }
-
-  if (strcpy (tmp3, "Y") != tmp3 ||
-      strcat (tmp3, "Y") != tmp3 ||
-      memset (target, 'Y', 2) != target)
-    {
-      eprintf (__LINE__, target, "Y", 0);
-      test_failed = 1;
-    }
-
-  target[2] = '\0';
-  if (memcmp (target, "YY", 2) || strcmp (target, "YY") ||
-      strlen (target) != 2 || memchr (target, 'Y', 2) != target ||
-      strcmp (tmp3, target) ||
-      strncmp (target, tmp3, 3) ||
-      strncmp (target, tmp3, 4) ||
-      strncmp (target, tmp3, 2) ||
-      strchr (target, 'Y') != target)
-    {
-      eprintf (__LINE__, target, "YY", 2);
-      test_failed = 1;
-    }
-
-  strcpy (target, "WW");
-  if (memcmp (target, "WW", 2) || strcmp (target, "WW") ||
-      strlen (target) != 2 || memchr (target, 'W', 2) != target ||
-      strchr (target, 'W') != target)
-    {
-      eprintf (__LINE__, target, "WW", 2);
-      test_failed = 1;
-    }
-
-  if (strncpy (target, "XX", 16) != target ||
-      memcmp (target, "XX\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16))
-    {
-      eprintf (__LINE__, target, "XX\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16);
-      test_failed = 1;
-    }
-
-  if (strcpy (tmp3, "ZZ") != tmp3 ||
-      strcat (tmp3, "Z") != tmp3 ||
-      memcpy (tmp4, "Z", 2) != tmp4 ||
-      strcat (tmp4, "ZZ") != tmp4 ||
-      memset (target, 'Z', 3) != target)
-    {
-      eprintf (__LINE__, target, "ZZZ", 3);
-      test_failed = 1;
-    }
-
-  target[3] = '\0';
-  tmp5[0] = '\0';
-  strncat (tmp5, "123", 2);
-  if (memcmp (target, "ZZZ", 3) || strcmp (target, "ZZZ") ||
-      strcmp (tmp3, target) || strcmp (tmp4, target) ||
-      strncmp (target, "ZZZ", 4) || strncmp (target, "ZZY", 3) <= 0 ||
-      strncmp ("ZZY", target, 4) >= 0 ||
-      memcmp (tmp5, "12", 3) ||
-      strlen (target) != 3)
-    {
-      eprintf (__LINE__, target, "ZZZ", 3);
-      test_failed = 1;
-    }
-
-  target[2] = 'K';
-  if (memcmp (target, "ZZZ", 2) || strcmp (target, "ZZZ") >= 0 ||
-      memcmp (target, "ZZZ", 3) >= 0 || strlen (target) != 3 ||
-      memchr (target, 'K', 3) != target + 2 ||
-      strncmp (target, "ZZZ", 2) || strncmp (target, "ZZZ", 4) >= 0 ||
-      strchr (target, 'K') != target + 2)
-    {
-      eprintf (__LINE__, target, "ZZK", 3);
-      test_failed = 1;
-    }
-  
-  strcpy (target, "AAA");
-  if (memcmp (target, "AAA", 3) || strcmp (target, "AAA") ||
-      strncmp (target, "AAA", 3) ||
-      strlen (target) != 3)
-    {
-      eprintf (__LINE__, target, "AAA", 3);
-      test_failed = 1;
-    }
-  
-  j = 5;
-  while (j < MAX_1)
-    {
-      for (i = j-1; i <= j+1; ++i)
-        {
-	  /* don't bother checking unaligned data in the larger
-	     sizes since it will waste time without performing additional testing */
-	  if (i <= 16 * sizeof(long))
-	    {
-	      align_test_iterations = 2*sizeof(long);
-              if (i <= 2 * sizeof(long) + 1)
-                z = 2;
-	      else
-	        z = 2 * sizeof(long);
-            }
-	  else
-            {
-	      align_test_iterations = 1;
-            }
-
-	  for (x = 0; x < align_test_iterations; ++x)
-	    {
-	      tmp1 = target + x;
-	      tmp2 = buffer2 + x;
-	      tmp3 = buffer3 + x;
-	      tmp4 = buffer4 + x;
-	      tmp5 = buffer5 + x;
-	      tmp6 = buffer6 + x;
-
-	      first_char = array[i % (sizeof(array) - 1)];
-	      second_char = array2[i % (sizeof(array2) - 1)];
-	      memset (tmp1, first_char, i);
-	      mycopy (tmp2, tmp1, i);
-	      myset (tmp2 + z, second_char, i - z - 1);
-	      if (memcpy (tmp1 + z, tmp2 + z, i - z - 1) != tmp1 + z)
-		{
-		  printf ("error at line %d\n", __LINE__);
-		  test_failed = 1;
-		}
-
-	      tmp1[i] = '\0';
-	      tmp2[i] = '\0';
-	      if (strcpy (expected, tmp2) != expected)
-		{
-		  printf ("error at line %d\n", __LINE__);
-		  test_failed = 1;
-		}
-	      tmp2[i-z] = first_char + 1;
-	      if (memmove (tmp2 + z + 1, tmp2 + z, i - z - 1) != tmp2 + z + 1 ||
-		  memset (tmp3, first_char, i) != tmp3)
-		{
-		  printf ("error at line %d\n", __LINE__);
-		  test_failed = 1;
-		}
-
-	      myset (tmp4, first_char, i);
-	      tmp5[0] = '\0';
-	      if (strncpy (tmp5, tmp1, i+1) != tmp5 ||
-		  strcat (tmp5, tmp1) != tmp5)
-		{
-		  printf ("error at line %d\n", __LINE__);
-		  test_failed = 1;
-		}
-	      mycopy (tmp6, tmp1, i);
-	      mycopy (tmp6 + i, tmp1, i + 1);
-
-	      tmp7[2*i+z] = second_char;
-              strcpy (tmp7, tmp1);
-         
-	      strchr (tmp1, second_char);
- 
-	      if (memcmp (tmp1, expected, i) || strcmp (tmp1, expected) ||
-		  strncmp (tmp1, expected, i) ||
-                  strncmp (tmp1, expected, i+1) ||
-		  strcmp (tmp1, tmp2) >= 0 || memcmp (tmp1, tmp2, i) >= 0 ||
-		  strncmp (tmp1, tmp2, i+1) >= 0 ||
-		  strlen (tmp1) != i || memchr (tmp1, first_char, i) != tmp1 ||
-		  strchr (tmp1, first_char) != tmp1 ||
-		  memchr (tmp1, second_char, i) != tmp1 + z ||
-		  strchr (tmp1, second_char) != tmp1 + z ||
-		  strcmp (tmp5, tmp6) ||
-		  strncat (tmp7, tmp1, i+2) != tmp7 ||
-		  strcmp (tmp7, tmp6) ||
-		  tmp7[2*i+z] != second_char)
-		{
-		  eprintf (__LINE__, tmp1, expected, 0);
-		  printf ("x is %d\n",x);
-		  printf ("i is %d\n", i);
-		  printf ("tmp1 is <%p>\n", tmp1);
-		  printf ("tmp5 is <%p> <%s>\n", tmp5, tmp5);
-		  printf ("tmp6 is <%p> <%s>\n", tmp6, tmp6);
-		  test_failed = 1;
-		}
-
-	      for (k = 1; k <= align_test_iterations && k <= i; ++k)
-		{
-		  if (memcmp (tmp3, tmp4, i - k + 1) != 0 ||
-		      strncmp (tmp3, tmp4, i - k + 1) != 0)
-		    {
-		      printf ("Failure at line %d, comparing %.*s with %.*s\n",
-			      __LINE__, i, tmp3, i, tmp4);
-		      test_failed = 1;
-		    }
-		  tmp4[i-k] = first_char + 1;
-		  if (memcmp (tmp3, tmp4, i) >= 0 ||
-		      strncmp (tmp3, tmp4, i) >= 0 ||
-		      memcmp (tmp4, tmp3, i) <= 0 ||
-		      strncmp (tmp4, tmp3, i) <= 0)
-		    {
-		      printf ("Failure at line %d, comparing %.*s with %.*s\n",
-			      __LINE__, i, tmp3, i, tmp4);
-		      test_failed = 1;
-		    }
-		  tmp4[i-k] = first_char;
-		}
-	    }              
-        }
-      j = ((2 * j) >> 2) << 2;
-    }
-
-  if (test_failed)
-    abort();
-  else
-    exit(0);
-}
diff --git a/newlib/testsuite/newlib.wctype/tiswctype.c b/newlib/testsuite/newlib.wctype/tiswctype.c
deleted file mode 100644
index da48fbb77..000000000
--- a/newlib/testsuite/newlib.wctype/tiswctype.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include <wctype.h>
-#include <newlib.h>
-#include "check.h"
-
-int main()
-{
-  wctype_t x;
-
-  x = wctype ("alpha");
-  CHECK (x != 0);
-  CHECK (iswctype (L'a', x) && isalpha ('a'));
-
-  x = wctype ("alnum");
-  CHECK (x != 0);
-  CHECK (iswctype (L'0', x) && isalnum ('0'));
-
-  x = wctype ("blank");
-  CHECK (x != 0);
-  CHECK (iswctype (L' ', x) && isblank (' '));
-
-  x = wctype ("cntrl");
-  CHECK (x != 0);
-  CHECK (iswctype (L'\n', x) && iscntrl ('\n'));
-
-  x = wctype ("digit");
-  CHECK (x != 0);
-  CHECK (iswctype (L'7', x) && isdigit ('7'));
-
-  x = wctype ("graph");
-  CHECK (x != 0);
-  CHECK (iswctype (L'!', x) && isgraph ('!'));
-
-  x = wctype ("lower");
-  CHECK (x != 0);
-  CHECK (iswctype (L'k', x) && islower ('k'));
-
-  x = wctype ("print");
-  CHECK (x != 0);
-  CHECK (iswctype (L'@', x) && isprint ('@'));
-
-  x = wctype ("punct");
-  CHECK (x != 0);
-  CHECK (iswctype (L'.', x) && ispunct ('.'));
-
-  x = wctype ("space");
-  CHECK (x != 0);
-  CHECK (iswctype (L'\t', x) && isspace ('\t'));
-
-  x = wctype ("upper");
-  CHECK (x != 0);
-  CHECK (iswctype (L'T', x) && isupper ('T'));
-
-  x = wctype ("xdigit");
-  CHECK (x != 0);
-  CHECK (iswctype (L'B', x) && isxdigit ('B'));
-
-  x = wctype ("unknown");
-  CHECK (x == 0);
-
-  exit (0);
-}
diff --git a/newlib/testsuite/newlib.wctype/twctrans.c b/newlib/testsuite/newlib.wctype/twctrans.c
deleted file mode 100644
index a70e00175..000000000
--- a/newlib/testsuite/newlib.wctype/twctrans.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <wctype.h>
-#include <newlib.h>
-#include "check.h"
-
-int main()
-{
-  wctrans_t x;
-
-  x = wctrans ("tolower");
-  CHECK (x != 0);
-  CHECK (towctrans (L'A', x) == tolower ('A'));
-  CHECK (towctrans (L'5', x) == tolower ('5'));
-
-  x = wctrans ("toupper");
-  CHECK (x != 0);
-  CHECK (towctrans (L'c', x) == toupper ('c'));
-  CHECK (towctrans (L'9', x) == toupper ('9'));
-
-  x = wctrans ("unknown");
-  CHECK (x == 0);
-
-  exit (0);
-}
diff --git a/newlib/testsuite/newlib.wctype/twctype.c b/newlib/testsuite/newlib.wctype/twctype.c
deleted file mode 100644
index d206876f8..000000000
--- a/newlib/testsuite/newlib.wctype/twctype.c
+++ /dev/null
@@ -1,64 +0,0 @@
-#include <wctype.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <string.h>
-#include <newlib.h>
-#include <locale.h>
-#include "check.h"
-
-int main()
-{
-#if !defined(_ELIX_LEVEL) || _ELIX_LEVEL > 1
-  if (_MB_LEN_MAX == 1)
-    {
-      CHECK (iswalpha(L'a'));
-      CHECK (!iswalpha(L'3'));
-      CHECK (iswalnum(L'9'));
-      CHECK (!iswalnum(L'$'));
-      CHECK (iswcntrl(L'\n'));
-      CHECK (!iswcntrl(L'#'));
-      CHECK (iswdigit(L'2'));
-      CHECK (!iswdigit(L'a'));
-      CHECK (iswgraph(L'2'));
-      CHECK (!iswgraph(L' '));
-      CHECK (iswlower(L'g'));
-      CHECK (!iswlower(L'G'));
-      CHECK (iswprint(L'*'));
-      CHECK (!iswprint(L'\n'));
-      CHECK (iswpunct(L','));
-      CHECK (!iswpunct(L'\n'));
-      CHECK (iswspace(L'\t'));
-      CHECK (!iswspace(L':'));
-      CHECK (iswupper(L'G'));
-      CHECK (!iswupper(L'g'));
-      CHECK (iswxdigit(L'A'));
-      CHECK (!iswxdigit(L'g'));
-    }
-  else
-    {
-      setlocale (LC_CTYPE, "C-UTF-8");
-      CHECK (iswalpha(0x0967));
-      CHECK (!iswalpha(0x128e));
-      CHECK (iswalnum(0x1d7ce));
-      CHECK (!iswalnum(0x1d800));
-      CHECK (iswcntrl(0x007f));
-      CHECK (!iswcntrl(0x2027));
-      CHECK (iswdigit(L'2'));
-      CHECK (!iswdigit(0x0009));
-      CHECK (iswlower(0x03b3));
-      CHECK (!iswlower(0x04aa));
-      CHECK (iswprint(0x0b13));
-      CHECK (!iswprint(0x0ce2));
-      CHECK (iswpunct(0x002d));
-      CHECK (!iswpunct(0x0a84));
-      CHECK (iswspace(0x000a));
-      CHECK (!iswspace(0x2060));
-      CHECK (iswupper(0x01a4));
-      CHECK (!iswupper(0x1e6d));
-      CHECK (iswxdigit(L'A'));
-      CHECK (!iswxdigit(0x1f48));
-    }
-#endif
-
-  exit (0);
-}
diff --git a/newlib/testsuite/newlib.wctype/wctype.exp b/newlib/testsuite/newlib.wctype/wctype.exp
deleted file mode 100644
index cd5d7d689..000000000
--- a/newlib/testsuite/newlib.wctype/wctype.exp
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (C) 2002 by Red Hat, Incorporated. All rights reserved.
-#
-# Permission to use, copy, modify, and distribute this software
-# is freely granted, provided that this notice is preserved.
-#
-
-load_lib passfail.exp
-
-set exclude_list {
-}
-
-newlib_pass_fail_all -x $exclude_list